Origin of unusual HREE-Mo-rich carbonatites in the Qinling orogen, China

PubMed Central

Song, Wenlei; Xu, Cheng; Smith, Martin P.; Kynicky, Jindrich; Huang, Kangjun; Wei, Chunwan; Zhou, Li; Shu, Qihai

2016-01-01

Carbonatites, usually occurring within intra-continental rift-related settings, have strong light rare earth element (LREE) enrichment; they rarely contain economic heavy REE (HREE). Here, we report the identification of Late Triassic HREE-Mo-rich carbonatites in the northernmost Qinling orogen. The rocks contain abundant primary HREE minerals and molybdenite. Calcite-hosted fluid inclusions, inferred to represent a magmatic-derived aqueous fluid phase, contain significant concentrations of Mo (~17 ppm), reinforcing the inference that these carbonatitic magmas had high Mo concentrations. By contrast, Late Triassic carbonatites in southernmost Qinling have economic LREE concentrations, but are depleted in HREE and Mo. Both of these carbonatite types have low δ26Mg values (−1.89 to −1.07‰), similar to sedimentary carbonates, suggesting a recycled sediment contribution for REE enrichment in their mantle sources. We propose that the carbonatites in the Qinling orogen were formed, at least in part, by the melting of a subducted carbonate-bearing slab, and that 10 Ma younger carbonatite magmas in the northernmost Qinling metasomatized the thickened eclogitic lower crust to produce high levels of HREE and Mo. PMID:27857170

Origin of unusual HREE-Mo-rich carbonatites in the Qinling orogen, China.

PubMed

Song, Wenlei; Xu, Cheng; Smith, Martin P; Kynicky, Jindrich; Huang, Kangjun; Wei, Chunwan; Zhou, Li; Shu, Qihai

2016-11-18

Carbonatites, usually occurring within intra-continental rift-related settings, have strong light rare earth element (LREE) enrichment; they rarely contain economic heavy REE (HREE). Here, we report the identification of Late Triassic HREE-Mo-rich carbonatites in the northernmost Qinling orogen. The rocks contain abundant primary HREE minerals and molybdenite. Calcite-hosted fluid inclusions, inferred to represent a magmatic-derived aqueous fluid phase, contain significant concentrations of Mo (~17 ppm), reinforcing the inference that these carbonatitic magmas had high Mo concentrations. By contrast, Late Triassic carbonatites in southernmost Qinling have economic LREE concentrations, but are depleted in HREE and Mo. Both of these carbonatite types have low δ 26 Mg values (-1.89 to -1.07‰), similar to sedimentary carbonates, suggesting a recycled sediment contribution for REE enrichment in their mantle sources. We propose that the carbonatites in the Qinling orogen were formed, at least in part, by the melting of a subducted carbonate-bearing slab, and that 10 Ma younger carbonatite magmas in the northernmost Qinling metasomatized the thickened eclogitic lower crust to produce high levels of HREE and Mo.

New data on carbonatites of the Il'mensky-Vishnevogorsky alkaline complex, the southern Urals, Russia

NASA Astrophysics Data System (ADS)

Nedosekova, I. L.

2007-04-01

Carbonatites that are hosted in metamorphosed ultramafic massifs in the roof of miaskite intrusions of the Il’mensky-Vishnevogorsky alkaline complex are considered. Carbonatites have been revealed in the Buldym, Khaldikha, Spirikha, and Kagan massifs. The geological setting, structure of carbonatite bodies, distribution of accessory rare-metal mineralization, typomorphism of rock-forming minerals, geochemistry, and Sr and Nd isotopic compositions are discussed. Dolomite-calcite carbonatites hosted in ultramafic rocks contain tetraferriphlogopite, richterite, accessory zircon, apatite, magnetite, ilmenite, pyrrhotite, pyrite, and pyrochlore. According to geothermometric data and the composition of rock-forming minerals, the dolomite-calcite carbonatites were formed under K-feldspar-calcite, albite-calcite, and amphibole-dolomite-calcite facies conditions at 575-300°C. The Buldym pyrochlore deposit is related to carbonatites of these facies. In addition, dolomite carbonatites with accessory Nb and REE mineralization (monazite, aeschynite, allanite, REE-pyrochlore, and columbite) are hosted in ultramafic massifs. The dolomite carbonatites were formed under chlorite-sericite-ankerite facies conditions at 300-200°C. The Spirikha REE deposit is related to dolomite carbonatite and alkaline metasomatic rocks. It has been established that carbonatites hosted in ultramafic rocks are characterized by high Sr, Ba, and LREE contents and variable Nb, Zr, Ti, V, and Th contents similar to the geochemical attributes of calcio-and magnesiocarbonatites. The low initial 87Sr/86Sr = 0.7044-0.7045 and ɛNd ranging from 0.65 to -3.3 testify to their derivation from a deep mantle source of EM1 type.

The Nature and Origin of the REE Mineralization in the Wicheeda Carbonatite, British Columbia, Canada

DOE PAGES

Trofanenko, J.; Williams-Jones, A. E.; Simandl, G. J.; ...

2016-01-01

The Wicheeda carbonatite is a deformed plug or sill that hosts relatively high grade light rare earth elements (LREE) mineralization in the British Columbia alkaline province. It was emplaced within metasedimentary rocks belonging to the Kechika Group, which have been altered to potassic fenite near the intrusion and sodic fenite at greater distances from it. The intrusion comprises a ferroan dolomite carbonatite core, which passes gradationally outward into calcite carbonatite. The potentially economic REE mineralization is hosted by the dolomite carbonatite. We recognized three types of dolomite. Dolomite constitutes the bulk of the dolomite carbonatite, dolomite replaced dolomite near veinsmore » and vugs, and dolomite occurs in veins and vugs together with the REE mineralization. Carbon and oxygen isotope ratios indicate that the calcite carbonatite crystallized from a magma of mantle origin, that dolomite is of primary igneous origin, that dolomite has a largely igneous signature with a small hydrothermal component, and that dolomite is of hydrothermal origin. Furthermore, the REE minerals comprise REE fluorocarbonates, ancylite-(Ce), and monazite-(Ce). In addition to dolomite, they occur with barite, molybdenite, pyrite, and thorite. Minor concentrations of niobium are present as magmatic pyrochlore in the calcite carbonatite. model is proposed in which crystallization of calcite carbonatite preceded that of dolomite carbonatite. During crystallization of the latter, an aqueous-carbonic fluid was exsolved, which mobilized the REE as chloride complexes into vugs and fractures in the dolomite carbonatite, where they precipitated mainly in response to the increase in pH that accompanied fluid-rock interaction and, in the case of the REE fluorocarbonates, decreasing temperature. These fluids altered the host metasedimentary rock to potassic fenite adjacent to the carbonatite and, distal to it, they mixed with formational waters to produce sodic fenite.« less

Contrasting petrogenesis of spatially related carbonatites from Samalpatti and Sevattur, Tamil Nadu, India

NASA Astrophysics Data System (ADS)

Ackerman, Lukáš; Magna, Tomáš; Rapprich, Vladislav; Upadhyay, Dewashish; Krátký, Ondřej; Čejková, Bohuslava; Erban, Vojtěch; Kochergina, Yulia V.; Hrstka, Tomáš

2017-07-01

Two Neoproterozoic carbonatite suites of spatially related carbonatites and associated silicate alkaline rocks from Sevattur and Samalpatti, south India, have been investigated in terms of petrography, chemistry and radiogenic-stable isotopic compositions in order to provide further constraints on their genesis. The cumulative evidence indicates that the Sevattur suite is derived from an enriched mantle source without significant post-emplacement modifications through crustal contamination and hydrothermal overprint. The stable (C, O) isotopic compositions confirm mantle origin of Sevattur carbonatites with only a modest difference to Paleoproterozoic Hogenakal carbonatite, emplaced in the same tectonic setting. On the contrary, multiple processes have shaped the petrography, chemistry and isotopic systematics of the Samalpatti suite. These include pre-emplacement interaction with the ambient crustal materials with more pronounced signatures of such a process in silicocarbonatites. Calc-silicate marbles present in the Samalpatti area could represent a possible evolved end member due to the inability of common silicate rocks (pyroxenites, granites, diorites) to comply with radiogenic isotopic constraints. In addition, Samalpatti carbonatites show a range of C-O isotopic compositions, and δ13CV-PDB values between + 1.8 and + 4.1‰ found for a sub-suite of Samalpatti carbonatites belong to the highest values ever reported for magmatic carbonates. These heavy C-O isotopic signatures in Samalpatti carbonatites could be indicative of massive hydrothermal interaction with carbonated fluids. Unusual high-Cr silicocarbonatites, discovered at Samalpatti, seek their origin in the reaction of pyroxenites with enriched mantle-derived alkali-CO2-rich melts, as also evidenced by mantle-like O isotopic compositions. Field and petrographic observations as well as isotopic constraints must, however, be combined with the complex chemistry of incompatible trace elements as indicated

Recycling of subducted crustal components into carbonatite melts revealed by boron isotopes

NASA Astrophysics Data System (ADS)

Hulett, Samuel R. W.; Simonetti, Antonio; Rasbury, E. Troy; Hemming, N. Gary

2016-12-01

The global boron geochemical cycle is closely linked to recycling of geologic material via subduction processes that have occurred over billions of years of Earth’s history. The origin of carbonatites, unique melts derived from carbon-rich and carbonate-rich regions of the upper mantle, has been linked to a variety of mantle-related processes, including subduction and plume-lithosphere interaction. Here we present boron isotope (δ11B) compositions for carbonatites from locations worldwide that span a wide range of emplacement ages (between ~40 and ~2,600 Ma). Hence, they provide insight into the temporal evolution of their mantle sources for ~2.6 billion years of Earth’s history. Boron isotope values are highly variable and range between -8.6‰ and +5.5‰, with all of the young (<300 Ma) carbonatites characterized by more positive δ11B values (>-4.0‰), whereas most of the older carbonatite samples record lower B isotope values. Given the δ11B value for asthenospheric mantle of -7 +/- 1‰, the B isotope compositions for young carbonatites require the involvement of an enriched (crustal) component. Recycled crustal components may be sampled by carbonatite melts associated with mantle plume activity coincident with major tectonic events, and linked to past episodes of significant subduction associated with supercontinent formation.

Carbonatite magmatism in northeast India

NASA Astrophysics Data System (ADS)

Kumar, D.; Mamallan, R.; Dwivedy, K. K.

The Shillong Plateau of northeast India is identified as an alkaline province in view of the development of several carbonatite complexes e.g. the Sung Valley (Jaintia Hills), Jasra (Karbi-Anglong), Samchampi and Barpung (Mikir Hills) and lamprophyre dyke swarms (Swangkre, Garo-Khasi Hills). On the basis of limited KAr data, magmatic activity appears to have taken place over a protracted period, ranging from the Late Jurassic to the Early Cretaceous. The carbonatite complexes of the Shillong Plateau share several common traits: they are emplaced along rift zones, either within Archaean gneisses or Proterozoic metasediments and granites, and exhibit enrichment in the light rare-earth elements, U, Th, Nb, Zr, Ti, K and Na. The enrichment in incompatible trace elements can best be accounted for if the parental magmas were of alkali basaltic type (e.g. mela-nephelinite or carbonate-rich alkali picrite).

Geochemical constraints on depth of origin of oceanic carbonatites: The Cape Verde case

NASA Astrophysics Data System (ADS)

Doucelance, Régis; Hammouda, Tahar; Moreira, Manuel; Martins, João C.

2010-12-01

We present new Sr-Nd isotope compositions together with major- and trace element concentrations measured for whole rocks and mineral separate phases (apatite, biotite and calcite) from fifteen Cape Verde oceanic carbonatites (Atlantic Ocean). Trace element patterns of calcio- and magnesio-carbonatites present a strong depletion in K, Hf, Zr and Ti and an overall enrichment in Sr and REE relative to Cape Verde basalts, arguing for distinct source components between carbonatites and basalts. Sr and Nd isotopic ratios show small, but significant variations defining a binary mixing between a depleted end-member with unradiogenic Sr and radiogenic Nd values and a ''enriched'' end-member compatible with old marine carbonates. We interpret the depleted end-member as the Cape Verde oceanic lithosphere by comparison with previous studies on Cape Verde basalts. We thus propose that oceanic carbonatites are resulting from the interaction of a deep rooted mantle plume carrying a lower 4He/ 3He signature from the lower mantle and a carbonated metasomatized lithosphere, which by low degree melting produced carbonatite magmas. Sr-Nd compositions and trace element patterns of carbonatites argue in favor of a metasomatic agent originating from partial melting of recycled, carbonated oceanic crust. We have successfully reproduced the main geochemical features of this model using a Monte-Carlo-type simulation.

ASTER spectral analysis and lithologic mapping of the Khanneshin carbonatite volcano, Afghanistan

USGS Publications Warehouse

Mars, John C.; Rowan, Lawrence C.

2011-01-01

Advanced Spaceborne Thermal and Reflection Radiometer (ASTER) data of the early Quaternary Khanneshin carbonatite volcano located in southern Afghanistan were used to identify carbonate rocks within the volcano and to distinguish them from Neogene ferruginous polymict sandstone and argillite. The carbonatitic rocks are characterized by diagnostic CO3 absorption near 11.2 μm and 2.31–2.33 μm, whereas the sandstone, argillite, and adjacent alluvial deposits exhibit intense Si-O absorption near 8.7 μm caused mainly by quartz and Al-OH absorption near 2.20 μm due to muscovite and illite.Calcitic carbonatite was distinguished from ankeritic carbonatite in the short wave infrared (SWIR) region of the ASTER data due to a slight shift of the CO3 absorption feature toward 2.26 μm (ASTER band 7) in the ankeritic carbonatite spectra. Spectral assessment using ASTER SWIR data suggests that the area is covered by extensive carbonatite flows that contain calcite, ankerite, and muscovite, though some areas mapped as ankeritic carbonatite on a preexisting geologic map were not identified in the ASTER data. A contact aureole shown on the geologic map was defined using an ASTER false color composite image (R = 6, G = 3, B = 1) and a logical operator byte image. The contact aureole rocks exhibit Fe2+, Al-OH, and Fe, Mg-OH spectral absorption features at 1.65, 2.2, and 2.33 μm, respectively, which suggest that the contact aureole rocks contain muscovite, epidote, and chlorite. The contact aureole rocks were mapped using an Interactive Data Language (IDL) logical operator.A visible through short wave infrared (VNIR-SWIR) mineral and rock-type map based on matched filter, band ratio, and logical operator analysis illustrates: (1) laterally extensive calcitic carbonatite that covers most of the crater and areas northeast of the crater; (2) ankeritic carbonatite located southeast and north of the crater and some small deposits located within the crater; (3) agglomerate that

Experimental Constraints on Fe Isotope Fractionation in Carbonatite Melt Systems

NASA Astrophysics Data System (ADS)

Stuff, M.; Schuessler, J. A.; Wilke, M.

2015-12-01

Iron isotope data from carbonatite rocks show the largest variability found in igneous rocks to date [1]. Thus, stable Fe isotopes are promising tracers for the interaction of carbonate and silicate magmas in the mantle, particularly because their fractionation is controlled by oxidation state and bonding environment. The interpretation of Fe isotope data from carbonatite rocks remains hampered, since Fe isotope fractionation factors between silicate and carbonate melts are unknown and inter-mineral fractionation can currently only be assessed by theoretical calculations [1;2]. We present results from equilibration experiments in three natrocarbonatite systems between immiscible silicate and carbonate melts, performed at 1200°C and 0.7 GPa in an internally heated gas pressure vessel at intrinsic redox conditions. The Fe isotope compositions of the silicate melt (sil.m.), quenched to a glass, and the carbonate melt (carb.m.), forming fine-grained quench crystals, were analysed by solution MC-ICP-MS. Our first data indicate a remarkable fractionation of Δ56Fesil.m.‒carb.m.= 0.29 ±0.07 ‰ near equilibrium. At short run durations, even stronger fractionation up to Δ56Fesil.m.‒carb.m. = 0.41 ±0.07 ‰ occurs, due to kinetic effects. Additionally, Δ56Fesil.m.‒carb.m. changes with bulk chemical composition, likely reflecting considerable differences between the studied systems in terms of the Fe3+/Fe2+-ratios in the two immiscible liquids. Our findings provide experimental support for a carbonatite genesis model, in which extremely negative δ56Fe values in carbonatites result from differentiation processes, such as liquid immiscibility [1]. This effect can be enhanced by disequilibrium during fast ascent of carbonatite magmas. Their sensitivity to chemical and redox composition makes Fe isotopes a potential tool for constraining the original compositions of carbonatite magmas. [1] Johnson et al. (2010) Miner. Petrol. 98, 91-110. [2] Polyakov & Mineev (2000

Geophysical expression of a buried niobium and rare earth element deposit: the Elk Creek carbonatite, Nebraska, USA

USGS Publications Warehouse

Drenth, Benjamin J.

2014-01-01

The lower Paleozoic Elk Creek carbonatite is a 6–8-km-diameter intrusive complex buried under 200 m of sedimentary rocks in southeastern Nebraska. It hosts the largest known niobium deposit in the U.S. and a rare earth element (REE) deposit. The carbonatite is composed of several lithologies, the relations of which are poorly understood. Niobium mineralization is most enriched within a magnetite beforsite (MB) unit, and REE oxides are most concentrated in a barite beforsite unit. The carbonatite intrudes Proterozoic country rocks. Efforts to explore the carbonatite have used geophysical data and drilling. A high-resolution airborne gravity gradient and magnetic survey was flown over the carbonatite in 2012. The carbonatite is associated with a roughly annular vertical gravity gradient high and a subdued central low and a central magnetic high surrounded by magnetic field values lower than those over the country rocks. Geophysical, borehole, and physical property data are combined for an interpretation of these signatures. The carbonatite is denser than the country rocks, explaining the gravity gradient high. Most carbonatite lithologies have weaker magnetic susceptibilities than those of the country rocks, explaining why the carbonatite does not produce a magnetic high at its margin. The primary source of the central magnetic high is interpreted to be mafic rocks that are strongly magnetized and are present in large volumes. MB is very dense (mean density 3200  kg/m3) and strongly magnetized (median 0.073 magnetic susceptibility), producing a gravity gradient high and contributing to the aeromagnetic high. Barite beforsite has physical properties similar to most of the carbonatite volume, making it a poor geophysical target. Geophysical anomalies indicate the presence of dense and strongly magnetized rocks at depths below existing boreholes, either a large volume of MB or another unknown lithology.

Bases of the Mantle-Carbonatite Conception of Diamond Genesis

NASA Astrophysics Data System (ADS)

Litvin, Yuriy; Spivak, Anna; Kuzyura, Anastasia

2016-04-01

In the mantle-carbonatite conception of diamond genesis, the results of physic-chemical experiments are coordinated with the data of analytic mineralogy of primary inclusions in natural diamonds. Generalization of the solutions of principal genetic problems constitutes the bases of the conception. The solutions are following: (1) it is grounded that diamond-parental melts of the upper mantle have peridotite/eclogite - carbonatite - carbon compositions, of the transition zone - (wadsleite↔ringwoodite) - majorite - stishovite - carbonatite - carbon compositions, and of the lower mantle - periclase/wustite - bridgmanite - Ca-perovskite -stishovite - carbonatite - carbon compositions; (2) a construction of generalized diagrams for the diamond-parental media, which reveal changeable compositions of the growth melts of diamonds and associated phases, their genetic relations to the mantle substance, and classification connections of the primary inclusions in natural diamonds; (3) experimental equilibrium phase diagrams of syngenesis of diamonds and primary inclusions, which characterize the nucleation and growth conditions of diamonds and a capture of paragenetic and xenogenetic minerals by the growing diamonds; (4) a determination of the phase diagrams of diamonds and inclusions syngenesis under the regime of fractional crystallization, which discover the regularities of ultrabasic-basic evolution and paragenesis transitions in the diamond-forming systems of the upper and lower mantle. The evidence of the physic-chemically united mode of diamond genesis at the mantle depths with different mineralogy is obtained. References. Litvin Yu.A. (2007). High-pressure mineralogy of diamond genesis. In: Advances in High-Pressure Mineralogy (edited by Eiji Ohtani), Geological Society of America Special paper 421, 83-103. Litvin Yu.A. (2012). Experimental study of physic-chemical conditions of natural diamond formation on an example of the eclogite-carbonatite

Use of barium-strontium carbonatite for flux welding and surfacing of mining machines

NASA Astrophysics Data System (ADS)

Kryukov, R. E.; Kozyrev, N. A.; Usoltsev, A. A.

2017-09-01

The results of application of barium-strontium carbonatite for modifying and refining iron-carbon alloys, used for welding and surfacing in ore mining and smelting industry, are generalized. The technology of manufacturing a flux additive containing 70 % of barium-strontium carbonatite and 30 % of liquid glass is proposed. Several compositions of welding fluxes based on silicomanganese slag were tested. The flux additive was introduced in an amount of 1, 3, 5 %. Technological features of welding with the application of the examined fluxes are determined. X-ray spectral analysis of the chemical composition of examined fluxes, slag crusts and weld metal was carried out, as well as metallographic investigations of welded joints. The principal possibility of applying barium-strontium carbonatite as a refining and gas-protective additive for welding fluxes is shown. The use of barium-strontium carbonatite reduces the contamination of the weld seam with nonmetallic inclusions: non-deforming silicates, spot oxides and brittle silicates, and increases the desulfurizing capacity of welding fluxes.

Apatite in carbonatitic rocks: Compositional variation, zoning, element partitioning and petrogenetic significance

NASA Astrophysics Data System (ADS)

Chakhmouradian, Anton R.; Reguir, Ekaterina P.; Zaitsev, Anatoly N.; Couëslan, Christopher; Xu, Cheng; Kynický, Jindřich; Mumin, A. Hamid; Yang, Panseok

2017-03-01

Apatite-group phosphates are nearly ubiquitous in carbonatites, but our understanding of these minerals is inadequate, particularly in the areas of element partitioning and petrogenetic interpretation of their compositional variation among spatially associated rocks and within individual crystals. In the present work, the mode of occurrence, and major- and trace-element chemistry of apatite (sensu lato) from calcite and dolomite carbonatites, their associated cumulate rocks (including phoscorites) and hydrothermal parageneses were studied using a set of 80 samples from 50 localities worldwide. The majority of this set represents material for which no analytical data are available in the literature. Electron-microprobe and laser-ablation mass-spectrometry data ( 600 and 400 analyses, respectively), accompanied by back-scattered-electron and cathodoluminescence images and Raman spectra, were used to identify the key compositional characteristics and zoning patterns of carbonatitic apatite. These data are placed in the context of phosphorus geochemistry in carbonatitic systems and carbonatite evolution, and compared to the models proposed by previous workers. The documented variations in apatite morphology and zoning represent a detailed record of a wide range of evolutionary processes, both magmatic and fluid-driven. The majority of igneous apatite from the examined rocks is Cl-poor fluorapatite or F-rich hydroxylapatite (≥ 0.3 apfu F) with 0.2-2.7 wt.% SrO, 0-4.5 wt.% LREE2O3, 0-0.8 wt.% Na2O, and low levels of other cations accommodated in the Ca site (up to 1000 ppm Mn, 2300 ppm Fe, 200 ppm Ba, 150 ppm Pb, 700 ppm Th and 150 ppm U), none of which show meaningful correlation with the host-rock type. Silicate, (SO4)2 - and (VO4)3 - anions, substituting for (PO4)3 -, tend to occur in greater abundance in crystals from calcite carbonatites (up to 4.2 wt.% SiO2, 1.5 wt.% SO3 and 660 ppm V). Although (CO3)2 - groups are very likely present in some samples, Raman micro

Anisotropy of magnetic susceptibility (AMS) in the Siilinjärvi carbonatite complex, eastern Finland

NASA Astrophysics Data System (ADS)

Almqvist, Bjarne; Karell, Fredrik; Högdahl, Karin; Malehmir, Alireza; Heino, Pasi; Salo, Aleksi

2017-04-01

We present a set of AMS measurements on samples from the Siilinjärvi alkaline-carbonatite complex in eastern Finland. The complex has a tabular shape (ca. 16 km long, 1.5 km wide) that strikes north-south and is constrained within a steeply dipping N-S oriented deformation zone. It consists of a mixture of lithologies, including carbonatite, fenite and glimmerite (mica-rich rocks), which is hosted within a Precambrian granite and gneiss. After emplacement of the carbonatite, the complex was subsequently intruded by diabase dykes. Deformation has occurred in several episodes after dyke intrusions, and strain is heterogeneously distributed among the different lithologies. Strain localizes mainly within glimmerite and carbonatite, and at the contacts between dykes and glimmerite/carbonatite where shear zones develop locally. Structures provide indications for both simple (strike-slip) and pure shear components in the deformation history of the complex, although the former may dominate. Thirty-six localities were sampled, providing 272 specimens for AMS measurements, within the southern and eastern parts of the Siilinjärvi open-pit mine (within the complex), mainly from diabase dykes, glimmerite and carbonatites; a smaller number of samples were collected from fenite. Sampling was carried out in order to investigate magnetic fabrics in relation to the emplacement of the dykes and their structural relationship to the glimmerite/carbonatite. Structural measurements were made to accompany the magnetic fabric study. The magnetic fabric shows a magnetic foliation plane that is oriented north-south, with sub-horizontal k3-axes oriented nearly east-west. Magnetic lineation (k1) clusters sub-vertically, but does show a tendency to spread along the north-south magnetic foliation great circle. The dataset can be further divided into two sub-sets based on the bulk susceptibility (km) and degree of anisotropy (P). The bulk of the data set ( 70 %), belonging to samples of diabase

Mineralogical, petrological and geochemical aspects of alkaline and alkaline-carbonatite associations from Brazil

NASA Astrophysics Data System (ADS)

Morbidelli, L.; Gomes, C. B.; Beccaluva, L.; Brotzu, P.; Conte, A. M.; Ruberti, E.; Traversa, G.

1995-12-01

A general description of Mesozoic and Tertiary (Fortaleza) Brazilian alkaline and alkaline-carbonatite districts is presented with reference to mineralogy, petrology, geochemistry and geochronology. It mainly refers to scientific results obtained during the last decade by an Italo-Brazilian research team. Alkaline occurrences are distributed across Brazilian territory from the southern (Piratini, Rio Grande do Sul State) to the northeastern (Fortaleza, Ceará State) regions and are mainly concentrated along the borders of the Paraná Basin generally coinciding with important tectonic lineaments. The most noteworthy characteristics of these alkaline and alkaline-carbonatite suites are: (i) prevalence of intrusive forms; (ii) abundance of cumulate assemblages (minor dunites, frequent clinopyroxenites and members of the ijolite series) and (iii) abundance of evolved rock-types. Many data demonstrate that crystal fractionation was the main process responsible for magma evolution of all Brazilian alkaline rocks. A hypothesis is proposed for the genesis of carbonatite liquids by immiscibility processes. The incidence of REE and trace elements for different major groups of lithotypes, belonging both to carbonatite-bearing and carbonatite-free districts, are documented. Sr and preliminary Nd isotopic data are indicative of a mantle origin for the least evolved magmas of all the studied occurrences. Mantle source material and melting models for the generation of the Brazilian alkaline magma types are also discussed.

Regional geophysical expression of a carbonatite terrane in the eastern Mojave Desert, California

USGS Publications Warehouse

Ponce, David A.; Denton, Kevin M.; Miller, David M.

2013-01-01

A world-class, rare earth element carbonatite deposit is located near Mountain Pass, in the eastern Mojave Desert of California and is hosted by Proterozoic rocks that extend along the eastern margins of the Clark Mountain Range, Mescal Range, and Ivanpah Mountains in a north-northwest trending fault-bounded block. This Proterozoic block is generally composed of a complex of 1.7 - 1.6 Ga gneisses and schists that are intruded by ~1.4 Ga carbonatite and ultrapotassic mafic dikes. In the latter suite, common intrusive rock types include shonkinite, syenite, and alkali granites that are associated with carbonatite dikes. Regional geophysical data reveal that the carbonatite deposit itself occurs along the northeast edge of a prominent magnetic high with an amplitude of 200 nanoteslas, which appears to be related to the surrounding Proterozoic block. More than 340 gravity stations and 155 physical property samples were collected to augment existing geophysical data to determine the geophysical and geologic setting of the eastern Mojave Desert carbonatite terrane. Physical properties of representative rock types in the area show that 23 samples of carbonatite ore have an average saturated bulk density of 2,866 with a range of 2,440 to 3,192 kg/m3 and a magnetic susceptibility of 0.22 with a range of 0.03 to 0.61x 10-3 SI units, 17 samples of syenite have an average saturated bulk density of 2,670 with a range of 2,555 to 2,788 kg/m3 and a magnetic susceptibility of 3.50 with a range of 0.19 to 11.46 x 10-3 SI units, 19 samples of shonkinite dike have an average saturated bulk density of 2,800 with a range of 2,603 to 3,000 kg/m3 and a magnetic susceptibility of 0.71 with a range of 0.00 to 4.44 x 10-3 SI units, and 28 samples of Proterozoic gneiss have an average saturated bulk density of 2,734 with a range of 2,574 to 3,086 kg/m3 and a magnetic susceptibility of 1.23 with a range of 0.01 to 7.48 x 10-3 SI units. In general, carbonatites have distinctive gravity

Magnetite-apatite-dolomitic rocks of Ust-Chulman (Aldan shield, Russia): Seligdar-type carbonatites?

NASA Astrophysics Data System (ADS)

Prokopyev, Ilya R.; Doroshkevich, Anna G.; Redina, Anna A.; Obukhov, Andrey V.

2018-04-01

The Ust-Chulman apatite ore body is situated within the Nimnyrskaya apatite zone at the Aldan shield in Russia. The latest data confirm the carbonatitic origin of the Seligdar apatite deposit (Prokopyev et al. in Ore Geol Rev 81:296-308, 2017). The results of our investigations demonstrate that the magnetite-apatite-dolomitic rocks of the Ust-Chulman are highly similar to Seligdar-type dolomitic carbonatites in terms of the mineralogy and the fluid regime of formation. The ilmenite and spinel mineral phases occur as solid solutions with magnetite, and support the magmatic origin of the Ust-Chulman ores. The chemical composition of REE- and SO3-bearing apatite crystals and, specifically, monazite-(Ce) mineralisation and the formation of Nb-rutile, late hydrothermal sulphate minerals (barite, anhydrite) and haematite are typical for carbonatite complexes. The fluid inclusions study revealed similarities to the evolutionary trend of the Seligdar carbonatites that included changes of the hydrothermal solutions from highly concentrated chloride to medium-low concentrated chloride-sulphate and oxidized carbonate-ferrous.

Characterization of Possible Carbonatites in Southeast Missouri

NASA Astrophysics Data System (ADS)

Shavers, E. J.; Wulamu, A.; Encarnacion, J. P.; Luetkemeyer, P. B.

2014-12-01

Carbonatite is an igneous rock containing greater than 50% carbonate minerals. These rocks are the most common host of REE mineralization and may contain other economic deposits such as uranium, fluorine and niobium. Several researchers have mentioned the presence of a carbonatite phase interspersed among the olivine melilitite-alnöite dikes and diatremes of southeast Missouri, yet a comprehensive validation of this occurrence has, so far, remained elusive. Here we present petrographic, cathodoluminescence, stable isotope and Vis-NIR analysis which support the presence of a carbonatite magma. We identify apparently single generation calcite groundmass surrounding country rock xenoliths and olivine-cored mafic spheroids altered to carbonate and opaque minerals. We present stable isotope data for twenty samples of intrusive and country rock from across the study area. δ18O values for all rock types exhibit little variation with values between 21.9 ‰ and 28.1 ‰ (VSMOW), possibly the result of outgassing during emplacement. Measured δ13C values of (1) carbonate country rocks are between -0.1 ‰ and -2.9 ‰ (VPDB), (2) ultramafic and carbonate-rich mafic rocks range from -3.0 ‰ to -4.6 ‰ (VPDB) and (3) carbonate-rich rocks with volcanic textures, as well as carbonate veins within mafic rocks, fall between -5.4 ‰ to -8.2 ‰ (VPDB). We suggest that this data and initial petrographic observations indicate (1) limited fluid-rock interaction as the host rock clasts have retained their original isotopic signature, (2) an initial ultramafic phase enriched in 13C by a small amount of sedimentary rock due to low initial C content, (3) mantle sourced carbonate fluids entraining fragments of the ultramafic phase and xenoliths. However, future electron microprobe studies may allow us to further constrain the causes for the observed isotopic shifts. We compare laboratory reflectance measurements of a dolomitic intrusive and adjacent dolomite country rock. Absorption

Compositional Evolution of Pyrochlore-Group Minerals in Carbonatites of the Belaya Zima Pluton, Eastern Sayan

NASA Astrophysics Data System (ADS)

Khromova, E. A.; Doroshkevich, A. G.; Sharygin, V. V.; Izbrodin, L. A.

2017-12-01

Pyrochlore-group minerals are the main concentrators of niobium in carbonatites of the Belaya Zima alkaline pluton. Fluorcalciopyrochlore, kenopyrochlore and hydropyrochlore were identified in chemical composition. Their main characteristics are given: compositional variation, morphology, and zoning. During evolution from early calcite to late ankerite carbonatites, the UO2, TiO2, REE, and Y contents gradually increased. All carbonatite types are suggested to contain initial fluorcalciopyrochlore. However, in calcite-dolomite and ankerite carbonatites, it is partially or completely hydrated due to hydrothermal processes at the late stage of the pluton. This hydration resulted in the appearance of kenopyrochlore and hydropyrochlore due to removal of Ca, Na and F, and input of Ba, H2O, K, Si, Fe, and probably U and REE. At the last stage of the pluton, this hydrated pyrochlore was replaced by Fe-bearing columbite.

Petrology, geochemistry and geochonology of the Jacupiranga ultramafic, alkaline and carbonatitic complex (southern Brazil)

NASA Astrophysics Data System (ADS)

Chmyz, Luanna; Arnaud, Nicolas; Biondi, João Carlos

2015-04-01

Brazilian carbonatitic complexes are located at the edges of the Paleozoic basins and are usually associated to tectonic crustal flexuring or deep fault zones. The Jacupiranga Complex is a 65 km² ultrabasic-alkaline carbonatitic intrusive body outcroping at the northeastern border of the Paraná Basin, South of São Paulo State (Brazil). The northern portion of the unit is mostly composed of peridotitic rocks, while the southern part contains ijolites, melteigites, clinopyroxenites and carbonatites which host a phosphate deposit, mined since 1966. Even though the carbonatites only represent 1% of the Complex's area, they have concentrated most of the historical petrogenetic studies, leaving almost unknown the petrogenetic and the geochronological characteristics of other rocks. This explains why the few petrogenetic models from the literature are very partial and mostly unsatisfactory. While the peridotitic rocks are largely hindered by the absence of fresh outcrops, the regolith thickness and the high serpentinization degree, field observations and petrographic data notably show a heterogeneous zone around the peridotitic body. That zone is composed of a large variety of lithotypes over a relatively small area (~9 km²), comprising diorites, monzodiorites, alkali feldspar syenites, trachytes, lamprophyres and syenites. Moreover, these rocks present a restricted lateral continuity (decametric) and a lack of the magmatic bedding characteristic of the ijolitic and clinopyroxenitc rocks. The southern clinopyroxenitic zone (~20 km²) is composed of clinopyroxenite and melteigite with prominent magmatic layering, probably of cumulative origin, and a body of carbonatites which outcrops over less than 1 km2 essentially composed of sovite and beforsite, with abundant apatite. The Jacupiranga Complex characteristics indicate that its formation possibly comprises at least five magmatic events which cannot at present be surely ordinated in time: a) the emplacement of the

Geology and geochemistry of newly discovered Tertiary carbonatite occurrences near Villa Ahumada area, Basin and Range province, Chihuahua, northern Mexico

NASA Astrophysics Data System (ADS)

Nandigam, Ravi Chenchu

This study targets some newly discovered carbonatite occurrences located in the eastern Mexican Basin and Range province, a few kilometers to the east of Villa Ahumada, Chihuahua. The region containing these occurrences experienced compression related to subduction of the Farallon plate until about 32 Ma that was followed by Basin and Range extension. Geological mapping (1:5,000 scale), petrography, study of drill hole cuttings and satellite images, and major and trace element chemical analyses were utilized to understand the intrusive style of the carbonatites, their mineralogy and petrogenesis. The carbonatites, named Yuca, Mariana and El Indio, collectively intrude limestones, granitic intrusives and subduction-related tuffs and lavas mainly as a stock, breccias and dikes. The Yuca carbonatite was emplaced as a 900-m diameter stock, 500 x 350 m breccia body, numerous dikes and networks of fracture fillings. Crosscutting field relationships at Yuca suggest at least two stages of carbonatite emplacement. At Mariana, carbonatite was emplaced as a 750 x 350 m breccia. Four out of nine reverse circulation drill holes penetrated and bottomed in the breccia at an average depth of about 300 m At El Indio, carbonatite was emplaced as a 20 m diameter breccia pipe and a 1m thick sill. Major minerals present are calcite, Fe-rich calcite and hematite. Sporadic presence of fluorite is common. At Mariana, two generations of grossular-rich garnets associated with limestones and granite porphyry respectively are recognized. It is inferred that garnets in granite porphyry represent metasomatic alteration due to the emplacement of carbonatite breccia. Parental magmas of Yuca carbonatites have undergone differentiation under low fO2 conditions during which they were progressively enriched in iron. The carbonatite compositional types recognized based on major element data, in the sequence of least to most highly differentiated, are (1) magnesio-, (2) calcio- and (3

REE mobility during the alteration of Carbonatite and their economic potential.

NASA Astrophysics Data System (ADS)

Marien, Christian; Dijkstra, Arjan; Wilkins, Colin

2016-04-01

The supply risk of Rare Earth Elements is an unpredictable economic factor for the future application and development of modern technology for the EU. Therefore a better understanding of REE mobilisation during hydrothermal alteration of Carbonatites is essential for a safer supply of REE in general. The hydrothermal alteration of Carbonatite within the Fen Complex (Norway) forms a fine grained red hematized rock type, called Rødbergite, which is partially enriched in REE. The variation of REE within the Rødbergite is poorly understood and problematic for any future REE exploitation from Rødbergite. A genetic model of the formation of Rødbergite will provide more information about the economic potential of Rødbergite. The gradual transformation of carbonatite to Rødbergite is not easily observable due to sparse outcrop in the Fen Complex. A fresh road cut near the Bjørndallen farm (Fen Complex) provides a unique insight to the progressive hydrothermal alteration from carbonatite to Rødbergite and is therefore crucial for a genetic model of the formation of Rødbergite. 14 Samples were taken along the profile. The mineralogical, geochemical and textural characterization of the samples using the SEM as well as major-, trace- and isotopic elemental data revealed the breakdown of the primary minerals due to the infiltration of an oxidizing fluid along grain boundaries. The primary REE-minerals in unaltered Carbonatite are REE fluorocarbonates. With the increasing alteration to Rødbergite REE fluorocarbonates are progressively replaced by hematite. In contrast, monazite - a REE-phosphate - is the dominant REE mineral species in the Rødbergite. A transitional Rødbergite sample shows apatite aggregates with a strong preferential concentration of monazite along the rim of the apatite aggregates. This observation provides strong evidence for the solution of REE in the primary rock (carbonatite) by fluids and later precipitation of REE along phosphate bearing

Formation of carbonatite-related giant rare-earth-element deposits by the recycling of marine sediments

PubMed Central

Hou, Zengqian; Liu, Yan; Tian, Shihong; Yang, Zhiming; Xie, Yuling

2015-01-01

Carbonatite-associated rare-earth-element (REE) deposits are the most significant source of the world’s REEs; however, their genesis remains unclear. Here, we present new Sr-Nd-Pb and C-O isotopic data for Cenozoic carbonatite-hosted giant REE deposits in southwest China. These REE deposits are located along the western margin of the Yangtze Craton that experienced Proterozoic lithospheric accretion, and controlled by Cenozoic strike-slip faults related to Indo-Asian continental collision. The Cenozoic carbonatites were emplaced as stocks or dykes with associated syenites, and tend to be extremely enriched in Ba, Sr, and REEs and have high 87Sr/86Sr ratios (>0.7055). These carbonatites were likely formed by melting of the sub-continental lithospheric mantle (SCLM), which had been previously metasomatized by high-flux REE- and CO2-rich fluids derived from subducted marine sediments. The fertility of these carbonatites depends on the release of REEs from recycled marine sediments and on the intensity of metasomatic REE refertilization of the SCLM. We suggest that cratonic edges, particularly along ancient convergent margins, possess the optimal configuration for generating giant REE deposits; therefore, areas of metamorphic basement bounded or cut by translithospheric faults along cratonic edges have a high potential for such deposits. PMID:26035414

In situ U-Th-Pb ages of the Miaoya carbonatite complex in the South Qinling orogenic belt, central China

NASA Astrophysics Data System (ADS)

Ying, Yuancan; Chen, Wei; Lu, Jue; Jiang, Shao-Yong; Yang, Yueheng

2017-10-01

The Miaoya carbonatite complex in the South Qinling orogenic belt hosts one of the largest rare earth element (REE)-Nb deposits in China that is composed of carbonatite and syenite. The emplacement age of the complex and the geochronological relationship between the carbonatite and syenite have long been debated. In this study, in situ U-Th-Pb ages have been obtained for the constituent minerals zircon, monazite and columbite from carbonatite and syenite of the Miaoya complex, together with their chemical and isotopic compositions. In situ trace element compositions for zircon from carbonatite and syenite are highly variable. The zircon displays slightly heavy REE (HREE)-enriched chondrite-normalized patterns with no Eu anomaly and various light REE (LREE) contents. In situ Th-Pb dating for zircon from the Miaoya complex by laser ablation ICP-MS yields ages of 442.6 ± 4.0 Ma (n = 53) for syenite and 426.5 ± 8.0 Ma (n = 23) for carbonatite. Monazite from carbonatite and syenite shows similar chondrite-normalized REE patterns and yields a consistent Th-Pb age of 240 Ma. Based on petrographic and chemical composition, columbite from the carbonatite can be identified into two groups. The columbite dispersed within carbonatite is characterized by slightly LREE-enriched chondrite-normalized REE patterns, whereas columbite associated with apatite is characterized by LREE-depleted trends. Columbite has been further determined to have a weighted mean 206Pb/238U age of 232.8 ± 4.5 Ma (n = 9) using LA-ICP-MS. Detailed geochronological and chemical investigations suggest that there were two major episodes of magmatic/metasomatic activities in the formational history of the Miaoya carbonatite complex. The early alkaline magmatism emplaced in the Silurian was related to the opening of the Mianlue Ocean, whereas the late metasomatism or hydrothermal overprint occurred during the Triassic South Qinling orogeny. The latter serves as the major ore formation period for both REE (e

Paleoproterozoic mantle enrichment beneath the Fennoscandian Shield: Isotopic insight from carbonatites and lamprophyres

NASA Astrophysics Data System (ADS)

Woodard, Jeremy; Huhma, Hannu

2015-11-01

The isotope geochemistry of carbonatite from Naantali, southwest Finland as well as lamprophyres from North Savo, eastern Finland and the NW Ladoga region, northwest Russia has been investigated. These Paleoproterozoic dykes represent melting of an enriched mantle source spread over a 96,000 km2 area within the Fennoscandian Shield and intruded during post-collisional extension. The carbonatites have εNd(T) ranging from -0.8 to + 0.4, while lamprophyres have εNd(T) between -0.8 and + 0.3. 87Sr/86Sr ratios from the primary carbonatite samples from Naantali form a tight cluster between 0.70283 and 0.70303. For the lamprophyres, 87Sr/86Sr ratios range from 0.70327-0.70339 from NW Ladoga and 0.70316-0.70327 from North Savo. These characteristics are consistent with derivation from an enriched mantle showing an EMII trend, formed when sediments of mixed Archean and Proterozoic provenance were recycled back into the mantle via subduction during the preceding Svecofennian orogeny. Linear mixing of these subducted sediments and depleted mantle shows that a multistage process of enrichment is required to produce the observed isotope compositions. Batch melting of the subducted sediment first generated hydrous alkaline silicate melt, which crystallised as mica- and amphibole-rich veins in the mantle wedge. Continued melting of the subducted material under higher P-T conditions produced carbonatite melt, which infiltrated preferentially into this vein network. Assuming the silicate melt exerts greater influence on 87Sr/86Sr ratios while the carbonatite more greatly affects 143Nd/144Nd ratios, the model predicts significant regional variation in the silicate metasomatism with more consistent carbonatite metasomatism throughout the Fennoscandian subcontinental lithospheric mantle. The subducted sediments were likely also rich in organic matter, resulting in highly negative δ13C in mantle carbonates. The model predicts a higher content of organic carbon in the sediments in

Ultrasound-assisted extraction of rare-earth elements from carbonatite rocks.

PubMed

Diehl, Lisarb O; Gatiboni, Thais L; Mello, Paola A; Muller, Edson I; Duarte, Fabio A; Flores, Erico M M

2018-01-01

In view of the increasing demand for rare-earth elements (REE) in many areas of high technology, alternative methods for the extraction of these elements have been developed. In this work, a process based on the use of ultrasound for the extraction of REE from carbonatite (an igneous rock) is proposed to avoid the use of concentrated reagents, high temperature and excessive extraction time. In this pioneer work for REE extraction from carbonatite rocks in a preliminary investigation, ultrasonic baths, cup horn systems or ultrasound probes operating at different frequencies and power were evaluated. In addition, the power released to the extraction medium and the ultrasound amplitude were also investigated and the temperature and carbonatite mass/volume of extraction solution ratio were optimized to 70°C and 20mg/mL, respectively. Better extraction efficiencies (82%) were obtained employing an ultrasound probe operating at 20kHz for 15min, ultrasound amplitude of 40% (692Wdm -3 ) and using a diluted extraction solution (3% v/v HNO 3 +2% v/v HCl). It is important to mention that high extraction efficiency was obtained even using a diluted acid mixture and relatively low temperature in comparison to conventional extraction methods for REE. A comparison of results with those obtained by mechanical stirring (500rpm) using the same conditions (time, temperature and extraction solution) was carried out, showing that the use of ultrasound increased the extraction efficiency up to 35%. Therefore, the proposed ultrasound-assisted procedure can be considered as a suitable alternative for high efficiency extraction of REE from carbonatite rocks. Copyright © 2017 Elsevier B.V. All rights reserved.

Origin and evolution of the Ilmeny-Vishnevogorsky carbonatites (Urals, Russia): insights from trace-element compositions, and Rb-Sr, Sm-Nd, U-Pb, Lu-Hf isotope data

NASA Astrophysics Data System (ADS)

Nedosekova, I. L.; Belousova, E. A.; Sharygin, V. V.; Belyatsky, B. V.; Bayanova, T. B.

2013-02-01

The carbonatites of the Ilmeny-Vishnevogorsky Alkaline Complex (IVAC) are specific in geological and geochemical aspects and differ by some characteristics from classic carbonatites of the zoned alkaline-ultramafic complexes. Geological, geochemical and isotopic data and comparison with relevant experimental systems show that the IVAC carbonatites are genetically related to miaskites, and seem to be formed as a result of separation of carbonatite liquid from a miaskitic magma. Appreciable role of a carbonate fluid is established at the later stages of carbonatite formation. The trace element contents in the IVAC carbonatites are similar to carbonatites of the ultramafic-alkaline complexes. The characteristic signatures of the IVAC carbonatites are a high Sr content, a slight depletion in Ba, Nb, Та, Ti, Zr, and Hf, and enrichment in HREE in comparison with carbonatites of ultramafic-alkaline complexes. This testifies a specific nature of the IVAC carbonatites related to the fractionation of a miaskitic magma and to further Late Paleozoic metamorphism. Isotope data suggest a mantle source for IVAC carbonatites and indicate that moderately depleted mantle and enriched EMI-type components participated in magma generation. The lower crust could have been involved in the generation of the IVAC magma.

Postorogenic carbonatites at Eden Lake, Trans-Hudson Orogen (northern Manitoba, Canada): Geological setting, mineralogy and geochemistry

NASA Astrophysics Data System (ADS)

Chakhmouradian, A. R.; Mumin, A. H.; Demény, A.; Elliott, B.

2008-07-01

The Eden Lake pluton in the Trans-Hudson Orogen is the first known occurrence of carbonatites in Manitoba. The pluton is largely made up of modally and geochemically diverse syenitic rocks derived from postorogenic magma(s) of shoshonitic affinity. Their diversity can be accounted for by a combination of crystal fractionation and fluid release in the final evolutionary stage (crystallization of quartz alkali-feldspar syenite). At Eden Lake, carbonatites, represented predominantly by coarse-grained massive to foliated sövite, occur as branching veins and lenticular bodies up to 4 m in thickness showing crosscutting relations with respect to all of the syenitic units. The host rocks are intensely fenitized at the contact, and there is also abundant mineralogical and textural evidence for assimilation of silicate material by carbonatitic magma through wallrock reaction and xenolith fragmentation and digestion. The bulk of the carbonatites are composed of (in order of crystallization): Sr-REE-rich fluorapatite, aegirine-augite, and coarse calcite crystals surrounded by fine-grained calcite (on average, ˜ 90 vol.% of the rock). Noteworthy accessory constituents are celestine, bastnäsite-(Ce) (both as primary inclusions in calcite), Nb-Zr-rich titanite, low-Hf zircon, allanite-(Ce) and andradite. The calcite is chemically uniform (Sr-rich, Mg-Mn-Fe-poor and low in 13C), but shows clear evidence of ductile deformation and syndeformational cataclasis. Geochemically, the carbonatites are enriched in Sr, Ba, light rare-earth elements, Th and U, but depleted in high-field-strength elements (particularly, Ti, Nb and Ta). The stable-isotope composition of coarse- and fine-grained calcite from the carbonatites and interstitial calcite from syenites is remarkably uniform: ca. - 8.16 ± 0.27‰ δ13C (PDB) and + 8.04 ± 0.19‰ δ18O (SMOW). The available textural and geochemical evidence indicates that the Eden Lake carbonatites are not consanguineous with the associated

A Lithospheric Origin for the Elk Creek Carbonatite Complex, SE Nebraska?

NASA Astrophysics Data System (ADS)

Farmer, G. L.

2015-12-01

The Elk Creek carbonatite complex in southeastern Nebraska is part of a widespread Cambrian-Ordovician alkali igneous event that affected much of North America during and after the break-up of the Rodinian supercontinent. We conducted whole rock and mineral Nd, Sr, Pb and Hf isotopic analyses of drill cores obtained from this complex in order to assess the source regions of the parental carbonatite magma. Low precision laser ablation U-Pb age determinations from individual zircon grains separated from carbonate-rich "syenites" range from 480 +/- 20 Ma to 540+/- 14 Ma. Whole rock Nd, Sr and Pb isotopic compositions all plot on Cambrian (~550 Ma) isochrons, implying that the carbonatites crystallized from melts with homogeneous radiogenic isotopic compositions. Initial ɛNd and ɛHf are well defined at ~+2 and ~0, respectively, while initial 87Sr/86Sr values are more variable and range from 0.7028 to 0.7058. The contemporaneously emplaced State Line kimberlites in the Front Range of north central Colorado share the same Nd and Sr isotopic compositions imply that sources of these rocks were similar and geographically widespread. Overall, the isotopic compositions are those expected from "Group 1" alkaline igneous rocks, usually interpreted as derivates from the sublithospheric mantle. Cretaceous-Tertiary alkaline rocks in North America generally belong to "Group 1" and may have originated in this fashion (Genet et al., 2014, Earth Planet. Sci. Lett.). An alternative possibility is that the Cambrian-Ordovician carbonatites and kimberlites were derived from underlying, carbonated portions of the lithospheric mantle that formed after the original stabilization of the latter in the Paleoproterozoic. Nd and Hf depleted mantle model ages for the Elk Creek and State Line alkaline rocks range from ~0.8 Ga to ~1.1 Ga and allow the possibility that both sets of intrusive rocks represent melting of mantle metasomatized either during or after the assembly of Rodinia. Widespread

U-Pb zircon geochronologycal investigation on the Morro dos Seis Lagos Carbonatite Complex and associated Nb deposit (Amazonas, Brazil)

NASA Astrophysics Data System (ADS)

Rossoni, Marco B.; Bastos Neto, Artur C.; Souza, Valmir S.; Marques, Juliana C.; Dantas, Elton; Botelho, Nilson F.; Giovannini, Arthur L.; Pereira, Vitor P.

2017-12-01

We present results of U-Pb dating (by MC-ICP-MS) of zircons from samples that cover all of the known lithotypes in the Seis Lagos Carbonatite Complex and associated lateritic mineralization (the Morro dos Seis Lagos Nb deposit). The host rock (gneiss) yielded an age of 1828 ± 09 Ma interpreted as the crystallization time of this unit. The altered feldspar vein in the same gneiss yielded an age of 1839 ± 29 Ma. Carbonatite samples provided 3 groups of ages. The first group comprises inherited zircons with ages compatible with the gneissic host rock: 1819 ± 10 Ma (superior intercept), 1826 ± 5 Ma (concordant age), and 1812 ± 27 Ma (superior intercept), all from the Orosirian. The second and the third group of ages are from the same carbonatite sample: the superior intercept age of 1525 ± 21 Ma (MSWD = 0.77) and the superior intercept age of 1328 ± 58 Ma (MSWD = 1.4). The mineralogical study indicates that the ∼1.3 Ga zircons have affinity with carbonatite. It is, however, a tendence rather than a well-defined result. The data allow state that the age of 1328 ± 58 Ma represents the maximum age of the carbonatite. Without the same certainty, we consider that the data suggest that this age may be the carbonatite age, whose emplacement would have been related to the evolution of the K'Mudku belt. The best age obtained in laterite samples (a superior intercept age of 1828 ± 12 Ma) is considered the age of the main source for the inherited zircons related to the gneissic host rock.

Origin of heavy REE mineralisation in carbonatites: Constraints form the Huanglongpu Mo-HREE deposit, Qinling, China.

NASA Astrophysics Data System (ADS)

Smith, Martin; Cheng, Xu; Kynicky, Jindrich; Cangelosi, Delia; Wenlei, Song

2017-04-01

The carbonatite dykes of the Huanglongpu area, Lesser Qinling, China, are unusual in that they are quartz-bearing, Mo-mineralised and enriched in the heavy rare earth elements (HREE) relative to typical carbonatites. Carbonatite monazite (208.9±4.6 Ma to 213.6±4.0; Song et al., 2016) gives a comparable U-Pb radiometric age to molybdenite (220Ma; Stein et al., 1997), confirming interpretations that Mo is derived from the carbonatite, and not a subsequent overprint from regional porphyry-style mineralisation ( 141Ma). The sulphides in the carbonatites have mantle-like 34S ( 1‰) and low δ26Mg values (-1.89 to -1.07‰), similar to sedimentary carbonates, suggesting a recycled sediment contribution in their mantle sources that may be responsible for the Mo and HREE enrichment (Song et al., 2016). The textures of REE minerals indicate crystallisation of monazite-(Ce), bastnäsite-(Ce), parisite-(Ce) and aeschynite-(Ce) as magmatic phases. Monazite-(Ce) was subsequently altered to produce apatite, which was in turn replaced by britholite-(Ce), accompanied by the formation of allanite-(Ce). The REE-fluorcarbonates where replaced by synchysite-(Ce) and röntgenite-(Ce). Aeschynite-(Ce) was altered initially to uranopyrochlore and then pyrochlore with uraninite inclusions. The mineralogical evolution reflects the evolution from magmatic carbonatite, through to more silica-rich conditions during the magmatic-hydrothermal transition, to fully hydrothermal conditions accompanied by the formation of sulphate minerals. Each alteration stage resulted in the preferential leaching of the LREE and enrichment in the HREE. Mass balance considerations indicate that the HREE enrichment could not be a passive process, and that hydrothermal fluids must have contributed HREE to the system. The evolution of the fluorcarbonate mineral assemblage requires an increase in aCa2+ and aCO32- in the metasomatic fluid, and so breakdown of HREE-enriched calcite may have been the HREE source

Zirconium and hafnium fractionation in differentiation of alkali carbonatite magmatic systems

NASA Astrophysics Data System (ADS)

Kogarko, L. N.

2016-05-01

Zirconium and hafnium are valuable strategic metals which are in high demand in industry. The Zr and Hf contents are elevated in the final products of magmatic differentiation of alkali carbonatite rocks in the Polar Siberia region (Guli Complex) and Ukraine (Chernigov Massif). Early pyroxene fractionation led to an increase in the Zr/Hf ratio in the evolution of the ultramafic-alkali magmatic system due to a higher distribution coefficient of Hf in pyroxene with respect to Zr. The Rayleigh equation was used to calculate a quantitative model of variation in the Zr/Hf ratio in the development of the Guli magmatic system. Alkali carbonatite rocks originated from rare element-rich mantle reservoirs, in particular, the metasomatized mantle. Carbonated mantle xenoliths are characterized by a high Zr/Hf ratio due to clinopyroxene development during metasomatic replacement of orthopyroxene by carbonate fluid melt.

Thermodynamic Analysis of Secondary Minerals Stability in Altered Carbonatites of the Oldoinyo Lengai Volcano, Northern Tanzania

NASA Astrophysics Data System (ADS)

Perova, E. N.; Zaitsev, A. N.

2017-12-01

Carbonatites from the Oldoinyo Lengai volcano, northern Tanzania, are unstable under normal atmospheric conditions. Owing to carbonatite interaction with water, the major minerals—gregoryite Na2(CO3), nyerereite Na2Ca(CO3)2, and sylvite KCl—are dissolved and replaced with secondary low-temperature minerals: thermonatrite Na2(CO3) · H2O, trona Na3(CO3)(HCO3) · 2H2O, nahcolite Na(HCO3), pirssonite Na2Ca(CO3)2 · 2H2O, calcite Ca(CO3), and shortite Na2Ca2(CO3)3. Thermodynamic calculations show that the formation of secondary minerals in Oldoinyo Lengai carbonatites are controlled by the pH of the pore solution, H2O and CO2 fugacity, and the ratio of Ca and Na activity in the Na2O-CaO-CO2-H2O system.

First identification of baddeleyite related/linked to contact metamorphism from carbonatites in the world's largest REE deposit, Bayan Obo in North China Craton

NASA Astrophysics Data System (ADS)

Zhang, Shuan-Hong; Zhao, Yue; Li, Qiu-Li; Hu, Zhao-Chu; Chen, Zhen-Yu

2017-07-01

Baddeleyite has been recognized as a key mineral to determine the crystallization age of silica-undersaturated igneous rocks. Here we report a new occurrence of baddeleyite identified from REE-Nb-Th-rich carbonatite in the world's largest REE deposit, Bayan Obo, in the North China Craton (China). U-Th-Pb dating of three baddeleyite samples yields crystallization ages of 310-270 Ma with the best estimated crystallization age of ca. 280 Ma. These ages are significantly younger than the ca. 1300 Ma Bayan Obo carbonatites, but broadly coeval to nearby Permian granitoids intruding into the carbonatites. Hence, the Bayan Obo baddeleyite did not crystallize from the carbonatitic magma that led to the formation of the Bayan Obo carbonatites and related REE-Nb-Th deposit. Instead, it crystallized from hydrothermal fluids and/or a reaction involving zircon and dolomite during contact metamorphism related to the Permian granitoid emplacement. This is in agreement with the results of electron microprobe analysis that show humite inclusions in baddeleyite, since humite is a typical magnesian skarn mineral and occurs in close proximity to the intrusive contacts between carbonatites and granitoids. Our results show that baddeleyite can be used for dating hydrothermal and contact metamorphic processes.

Geochemical and isotopic investigation of the Laiwu-Zibo carbonatites from western Shandong Province, China, and implications for their petrogenesis and enriched mantle source

NASA Astrophysics Data System (ADS)

Ying, Jifeng; Zhou, Xinhua; Zhang, Hongfu

2004-08-01

Major and trace element and Nd-Sr isotope data of the Mesozoic Laiwu-Zibo carbonatites (LZCs) from western Shandong Province, China, provide clues to the petrogenesis and the nature of their mantle source. The Laiwu-Zibo carbonatites can be petrologically classified as calcio-, magnesio- and ferro-carbonatites. All these carbonatites show a similarity in geochemistry. On the one hand, they are extremely enriched in Ba, Sr and LREE and markedly low in K, Rb and Ti, which are similar to those global carbonatites, on the other hand, they have extremely high initial 87Sr/ 86Sr (0.7095-0.7106) and very low ɛNd (-18.2 to -14.3), a character completely different from those global carbonatites. The small variations in Sr and Nd isotopic ratios suggest that crustal contamination can not modify the primary isotopic compositions of LZC magmas and those values are representatives of their mantle source. The Nd-Sr isotopic compositions of LZCs and their similarity to those of Mesozoic Fangcheng basalts imply that they derived from an enriched lithospheric mantle. The formation of such enriched lithospheric mantle is connected with the major collision between the North China Craton (NCC) and the Yangtze Craton. Crustal materials from the Yangtze Craton were subducted beneath the NCC and melts derived from the subducted crust of the Yangtze Craton produced an enriched Mesozoic mantle, which is the source for the LZCs and Fangcheng basalts. The absence of alkaline silicate rocks, which are usually associated with carbonatites suggest that the LZCs originated from the mantle by directly partial melting.

Petrography, geochemistry and U-Pb zircon age of the Matongo carbonatite Massif (Burundi): Implication for the Neoproterozoic geodynamic evolution of Central Africa

NASA Astrophysics Data System (ADS)

Midende, Gilbert; Boulvais, Philippe; Tack, Luc; Melcher, Frank; Gerdes, Axel; Dewaele, Stijn; Demaiffe, Daniel; Decrée, Sophie

2014-12-01

The Matongo carbonatite intrusion belongs to the Neoproterozoic Upper Ruvubu alkaline plutonic complex (URAPC), that is located in Burundi along the western branch of the East African Rift. Beside the Matongo carbonatite, the URAPC alkaline complex comprises feldspathoidal syenites, diorites, quartz-bearing syenites and granites. Three main facies have been recognized in the Matongo carbonatite: (1) Sövites represent the dominant facies. Two varieties have been recognized. A scarce coarse-grained sövite (sövite I), which is altered and poorly enriched in REE (4 < ΣREE < 8 ppm), is encountered in highly fractured zones. A fine-grained sövite (sövite II), which is made of saccharoidal calcite, commonly associated with apatite, aegirine and amphibole, is abundant in the intrusion. Sövite II is enriched in LREE (442 < ΣREE < 1550 ppm, 49 < LaN/YbN < 175). (2) Ferrocarbonatites, that form decimeter-wide veins crosscutting the sövites, are characterized by a LREE enriched patterns (225 < ΣREE < 1048 ppm, 17 < LaN/YbN < 64). (3) K-feldspar and biotite-rich fenite facies (silicocarbonatites) have been recognized at the contact between the carbonatites and the country rock. They are likewise LREE-enriched (134 < ΣREE < 681 ppm, 25 < LaN/YbN < 46). Additionaly, "late" hydrothermal MREE-rich carbonatite veinlets can be found in sövite I. They are characterized by moderate enrichment in REE (ΣREE = 397 ppm), with a MREE-humped pattern (LaN/YbN = 3.7). The different facies represent the typical magmatic evolution of a carbonatite, while the silicocarbonatites are interpreted as resulting from the fenitisation of the country host-rocks. In addition, the most REE-depleted and fractionated facies, i.e. the coarse-grained sövite facies and the "late" calcite veinlets testify for hydrothermal processes that occurred after carbonatite emplacement and result from REE mobilization and redistribution. Large idiomorphic zircon crystals (megacrysts), found in the vicinity of

Formation of the world's largest REE deposit through protracted fluxing of carbonatite by subduction-derived fluids

PubMed Central

Ling, Ming-Xing; Liu, Yu-Long; Williams, Ian S.; Teng, Fang-Zhen; Yang, Xiao-Yong; Ding, Xing; Wei, Gang-Jian; Xie, Lu-Hua; Deng, Wen-Feng; Sun, Wei-Dong

2013-01-01

Rare Earth Elements (REE) are essential to modern society but the origins of many large REE deposits remain unclear. The U-Th-Pb ages, chemical compositions and C, O and Mg isotopic compositions of Bayan Obo, the world's largest REE deposit, indicate a protracted mineralisation history with unusual chemical and isotopic features. Coexisting calcite and dolomite are in O isotope disequilibrium; some calcitic carbonatite samples show highly varied δ26Mg which increases with increasing Si and Mg; and ankerite crystals show decreases in Fe and REE from rim to centre, with highly varied REE patterns. These and many other observations are consistent with an unusual mineralisation process not previously considered; protracted fluxing of calcitic carbonatite by subduction-released high-Si fluids during the closure of the Palaeo-Asian Ocean. The fluids leached Fe and Mg from the mantle wedge and scavenged REE, Nb and Th from carbonatite, forming the deposit through metasomatism of overlying sedimentary carbonate.

Hyperspectral remote sensing exploration of carbonatite - an example from Epembe, Kunene region, Namibia

NASA Astrophysics Data System (ADS)

Zimmermann, Robert; Brandmeier, Melanie; Andreani, Louis; Gloaguen, Richard

2015-04-01

Remote sensing data can provide valuable information about ore deposits and their alteration zones at surface level. High spectral and spatial resolution of the data is essential for detailed mapping of mineral abundances and related structures. Carbonatites are well known for hosting economic enrichments in REE, Ta, Nb and P (Jones et al. 2013). These make them a preferential target for exploration for those critical elements. In this study we show how combining geomorphic, textural and spectral data improves classification result. We selected a site with a well-known occurrence in northern Namibia: the Epembe dyke. For analysis LANDSAT 8, SRTM and airborne hyperspectral (HyMap) data were chosen. The overlapping data allows a multi-scale and multi-resolution approach. Results from data analysis were validated during fieldwork in 2014. Data was corrected for atmospherical and geometrical effects. Image classification, mineral mapping and tectonic geomorphology allow a refinement of the geological map by lithological mapping in a second step. Detailed mineral abundance maps were computed using spectral unmixing techniques. These techniques are well suited to map abundances of carbonate minerals, but not to discriminate the carbonatite itself from surrounding rocks with similar spectral signatures. Thus, geometric indices were calculated using tectonic geomorphology and textures. For this purpose the TecDEM-toolbox (SHAHZAD & GLOAGUEN 2011) was applied to the SRTM-data for geomorphic analysis. Textural indices (e.g. uniformity, entropy, angular second moment) were derived from HyMap and SRTM by a grey-level co-occurrence matrix (CLAUSI 2002). The carbonatite in the study area is ridge-forming and shows a narrow linear feature in the textural bands. Spectral and geometric information were combined using kohonen Self-Organizing Maps (SOM) for unsupervised clustering. The resulting class spectra were visually compared and interpreted. Classes with similar signatures

Hot N Sour Mantle Soup on Indian Plate During Cretaceous- Evidence from Clumped Isotope and Geochemical Studies of Sung Valley Carbonatite, India

NASA Astrophysics Data System (ADS)

Ghosh, P.; Banerjee, Y.; Tiwari, A.; Srivastava, R. K.

2015-12-01

Geological processes involved in the formation of Carbonatite rocks are complex and so is the understanding about its formational temperature. Fluid inclusion studies (1) on Carbonatite and their associated Ijolites showed a homogenization temperature of 1000-1100°C for Ijoltes and a temperature (T) range of 200-600°C was assigned to the carbonatite melts. Liquid immiscibility process is held responsible for the origin of parental carbonated (ijolititic/ nephelinitic) magma. The homogenization T signifies about a time interval during which there must be a considerable amount of T dropdown soon after the formation of Ijolite and subsequent crystallization of the residual carbonatite magma. However the lack of information about the T of the primary carbonated melt remains as an important area of petrological research. Experimental studies suggest a T range of 950-1400°C for the primary carbonate melt (2). Advent of Clumped isotope thermometry (3) allowed independent method for estimation of the formational T and provide avenues to derive composition of CO2 in equilibrium with carbonate melt. Earlier attempt involving carbonatites from several locations (4) captured range of T between 83°-416°C . Here we present our observation on calcite growth T in the carbonatites from the Cretaceous Sung valley ultramafic-alkaline-carbonatite complex. Based on stable C,O isotope study and Sr, Nd isotopic composition a mantle origin- genetically linked with the Kerguelen plume was proposed (5). Clumped isotope study on the same samples revealed consistent C and O isotope compositions, providing Δ47 values ranging from 0.32 to 0.48. δ13C and δ18O (in VPDB) values of the present study falls within the "Primary Igneous Carbonatite Field" (6). Using high T thermometry equation (7) we obtained a T range of 137-474 °C for the calcite present in the samples. The T recorded in our study is lower than that deduced experimental values of 960-625°C at 0.1 GPa (8) and fluid inclusion

Linearity of Mid-Continent Kimberlite-Carbonatite Magmatism, USA: Slab-Edge Focus as Alternative to Hot-Spot Track

NASA Astrophysics Data System (ADS)

Duke, G. I.; Carlson, R. W.

2009-12-01

The fates of subducted oceanic slabs at depth in the mantle are not well known, but linear trends of unusual magmatic products such as kimberlites and carbonatites might be used to track their past existence within the mantle. A N40°W linear trend of kimberlites and carbonatites, and rocks of kimberlitic affinity, from the Black Hills (WY-SD) to Alberta, was suggested to have been caused by upwelling mantle material focused directly above the western edge of the subducted Kula plate stalled in the transition zone, with a slab window or “tear” to the southwest (Duke, 2009). In contrast, a linear zone of similar magmas to the south (a southerly extension of this N40°W linear trend, from Kansas to Louisiana) has been proposed to represent a hot spot trace produced by a mantle plume (“Bermuda Hot Spot”). Ongoing studies of ages and geochemistry of alkalic rocks along the N40°W trend from Louisiana to Alberta provide increasing evidence for a slab-edge model as the cause of the linear trend of kimberlites and carbonatites in the mid-continent. In addition, seismic tomography indicates that the torn Farallon slab currently is stalled in the transition zone below the mid-continent, and an older slab is within the lower mantle farther to the east (Sigloch et al., 2008). These seismic data were interpreted as revealing the presence of the western edge of the Farallon plate trending roughly N40°W. The slab edge as projected to the surface is parallel to, but slightly west of, the trend of kimberlites and carbonatites at the mid-continent. Recently published ages show no clear age progression for the magmatism and thus do not support a hot-spot hypothesis for the linear trend. The isotopic compositions of the alkalic rocks show a genetic similarity among more recent magmas along the trend. There are at least four main pulses of magmatism along the trend at 110-85, 67-64, 55-52, and less than 50 Ma. Kimberlites and carbonatites in the northern section of the N40�

GRAPHITE EXTRUSIONS

DOEpatents

Benziger, T.M.

1959-01-20

A new lubricant for graphite extrusion is described. In the past, graphite extrusion mixtures have bcen composed of coke or carbon black, together with a carbonaceous binder such as coal tar pitch, and a lubricant such as petrolatum or a colloidal suspension of graphite in glycerin or oil. Sinee sueh a lubricant is not soluble in, or compatible with the biiider liquid, such mixtures were difficult to extrude, and thc formed pieees lacked strength. This patent teaches tbe use of fatty acids as graphite extrusion lubricants and definite improvemcnts are realized thereby since the fatty acids are soluble in the binder liquid.

Trace element and isotopic composition of apatite in carbonatites from the Blue River area (British Columbia, Canada) and mineralogy of associated silicate rocks

NASA Astrophysics Data System (ADS)

Mitchell, Roger; Chudy, Thomas; McFarlane, Christopher R. M.; Wu, Fu-Yuan

2017-08-01

Apatites from the Verity, Fir, Gum, Howard Creek and Felix carbonatites of the Blue River (British Columbia, Canada) area have been investigated with respect to their paragenesis, cathodoluminescence, trace element and Sr-Nd isotopic composition. Although all of the Blue River carbonatites were emplaced as sills prior to amphibolite grade metamorphism and have undergone deformation, in many instances magmatic textures and mineralogy are retained. Attempts to constrain the U-Pb age of the carbonatites by SIMS, TIMS and LA-ICP-MS studies of zircon and titanite were inconclusive as all samples investigated have experienced significant Pb loss during metamorphism. The carbonatites are associated with undersaturated calcite-titanite amphibole nepheline syenite only at Howard Creek although most contain clasts of disaggregated phoscorite-like rocks. Apatite from each intrusion is characterized by distinct, but wide ranges, in trace element composition. The Sr and Nd isotopic compositions define an array on a 87Sr/86Sr vs²Nd diagram at 350 Ma indicating derivation from depleted sub-lithospheric mantle. This array could reflect mixing of Sr and Nd derived from HIMU and EM1 mantle sources, and implies that depleted mantle underlies the Canadian Cordillera. Although individual occurrences of carbonatites in the Blue River region are mineralogically and geochemically similar they are not identical and thus cannot be considered as rocks formed from a single batch of parental magma at the same stage of magmatic evolution. However, a common origin is highly probable. The variations in the trace element content and isotopic composition of apatite from each occurrence suggest that each carbonatite represents a combination of derivation of the parental magma(s) from mineralogically and isotopically heterogeneous depleted mantle sources coupled with different stages of limited differentiation and mixing of these magmas. We do not consider these carbonatites as primary direct

Carbonatitic dykes during Pangaea transtension (Pelagonian Zone, Greece)

NASA Astrophysics Data System (ADS)

Schenker, Filippo Luca; Burg, Jean-Pierre; Kostopoulos, Dimitrios; Baumgartner, Lukas P.; Bouvier, Anne-Sophie

2018-03-01

Carbonatitic dykes surrounded by K-Na-fenites were discovered in the Pelagonian Zone in Greece. Their carbonate portions have an isotopic mantle signature of δ13C and δ18O ranging from -5.18 to -5.56 (‰ vs. VPDB) and from 10.68 to 11.59 (‰ vs. VSMOW) respectively, whereas their mafic silicate portions have high Nb, Ta and ɛNd values, typical of alkaline basalts. Textural relationships hint at a cogenetic intrusion of silicate and carbonate liquids that according to antithetic REE profiles segregated at shallow depths (<0.6 GPa) from a parental melt sourced deeper in the mantle. Fenites bear similar REE abundances to mafic rocks but with high Rb-Ba and low Nb-Ta values. SHRIMP II U-Pb analyses of magmatic zircon cores (δ18O = 7.21-7.51) from a carbonate-bearing syenitic amphibolite yielded a Permian intrusion age at 278 ± 2 Ma, considerably older than a Cretaceous (118 ± 4 Ma) greenschist overprint obtained from metamorphic zircon rims (δ18O = 6.78-7.02). From 300 to 175 Ma the ɛNd of the Pelagonian magmatism rose irregularly to more primitive values attesting to a higher increment of asthenosphere-derived melts. In this context, the carbonatite formed within a transtensional regime of an intra-Pangaea dextral transform fault that signalled the forthcoming penetrating breakoff of the supercontinent, manifested in the Permo-Triassic.

The cancrinite-syenite/carbonatite complex of Lueshe, Kivu/NE-Zaire: petrographic and geochemical studies and its economic significance

NASA Astrophysics Data System (ADS)

Maravic, H. v.; Morteani, G.; Roethe, G.

The Luesche cancrinite-syenite/carbonatite complex is located in NE-Zaire about 50 km SSW of Lake Edward. The alkaline rocks have intruded metamorphic rocks of Burundian age (1.100 m.y.). The country rocks are quartzites and mica schists bearing chlorite, garnet, Kyanite and staurolite, which indicates P-T conditions of some 4 kbar and 430-500°C, maximum 6 kbar and 620°C. The K/Ar age of the biotites from the carbonatite is found to be 516 m.y. The core of the alkaline complex is composed of cancrinite-syenites which vary from place to place with respect to the contents of garnet, amphibole, aegirine, sodalite and cancrinite. Significant variations of the pyrochlore content are also observed. The core is surrounded by fine grained calcitic carbonatite (alvikite) which often shows a banded texture and grades into coarse grained calcitic carbonatite (søvite). In the SE of the søvite ring there is a separate dolomitic carbonatite body (beforsite) while at the contacts between the alkaline rocks and the country rocks a wide range of low to high grade fenites enriched in Na or K occurs. Within the alkaline complex the highest niobium values are found associated with metasomatic rocks of the contact zones such as carbosyenites, pyroxentic rocks and fenites. The main niobium mineral is a Ca, Na-pyrochlore enriched in Ti and/or Sr. The geochemical distribution patterns of the major elements as well as of the trace elements, especially the REE, suggests that the carbonatites are of primary magmatic origin derived from mantle material which was affected by later remobilizations, most likely as a result of postmagmatic hydrothermal solutions. Regarding the cancrinite-syenites, there is no evidence for a comagmatic formation with the carbonatites. They are rather of subcrustal origin; formed in the course of various metasomatic processes where the alkalic carbonate melts or volatile carbonate phases interacted with the metamorphic country rocks to form rheomorphic syenites

Preliminary analysis of thermal-infrared multispectral scanner data of the Iron Hill, Colorado carbonatite-alkalic rock complex

NASA Technical Reports Server (NTRS)

Rowan, Lawrence C.; Watson, Kenneth; Miller, Susanne H.

1992-01-01

The Iron Hill carbonatite-alkalic igneous rock complex is in the Powderhorn mining district, approximately 40 km south-southwest of Gunnison, Colorado. The complex, which occupies about 30 sq km, was emplaced in metasedimentay and metavolcanic rocks during the later Precambrian or early Cambrian. The main rock types in the complex, from oldest to youngest, are fenite, pyroxenite, uncompahgrite, ijolite, nepheline syenite, and dolomitic carbonatite. The carbonatite is limonitic and forms an elliptially shaped 4 sq km stock. Calcitic and dolomitic carbonatite dikes are also numerous throughout the complex and in the pre-existing rocks. Pyroxenite is the most widespread rock type within the complex, but pyroxene is extensively altered to biotite, phlogopite, and vermiculite. Fenite, which formed through Na, K-metasomatism of the country rocks, typically contains more feldspar and less quartz than the equivalent unaltered country rocks. The other alkalic rock types are less widespread and less well exposed. Parts of the complex are covered by Oligocene ash-flow tuff and alluvial, colluvial, and glacial deposits. Sagebrush and grass cover is moderately dense to very dense at low to intermediate elevations; coniferous tree cover is dense at high elevations and on some north-facing slopes at lower elevations. A new algorithm was used to compute spectral emissivity ratios, independent of any emissivity assumptions. This algorithm has the advantage that any of the possible emissivity ratios can be computed and, thus, a large variety of composite ratio images can be constructed, which permits examination of various geologic hypotheses based on the spectral properties of the surface materials.

Carbonatite and alkaline intrusion-related rare earth element deposits–A deposit model

USGS Publications Warehouse

Verplanck, Philip L.; Van Gosen, Bradley S.

2011-01-01

The rare earth elements are not as rare in nature as their name implies, but economic deposits with these elements are not common and few deposits have been large producers. In the past 25 years, demand for rare earth elements has increased dramatically because of their wide and diverse use in high-technology applications. Yet, presently the global production and supply of rare earth elements come from only a few sources. China produces more than 95 percent of the world's supply of rare earth elements. Because of China's decision to restrict exports of these elements, the price of rare earth elements has increased and industrial countries are concerned about supply shortages. As a result, understanding the distribution and origin of rare earth elements deposits, and identifying and quantifying our nation's rare earth elements resources have become priorities. Carbonatite and alkaline intrusive complexes, as well as their weathering products, are the primary sources of rare earth elements. The general mineral deposit model summarized here is part of an effort by the U.S. Geological Survey's Mineral Resources Program to update existing models and develop new descriptive mineral deposit models to supplement previously published models for use in mineral-resource and mineral-environmental assessments. Carbonatite and alkaline intrusion-related REE deposits are discussed together because of their spatial association, common enrichment in incompatible elements, and similarities in genesis. A wide variety of commodities have been exploited from carbonatites and alkaline igneous rocks, such as rare earth elements, niobium, phosphate, titanium, vermiculite, barite, fluorite, copper, calcite, and zirconium. Other enrichments include manganese, strontium, tantalum, thorium, vanadium, and uranium.

Environmental Characteristics of Carbonatite and Alkaline Intrusion-related Rare Earth Element (REE) Deposits

NASA Astrophysics Data System (ADS)

Seal, R. R., II; Piatak, N. M.

2017-12-01

Carbonatites and alkaline intrusions are important sources of REEs. Environmental risks related to these deposit types have been assessed through literature review and evaluation of the geochemical properties of representative samples of mill tailings and their leachates. The main ore mineral in carbonatite deposits is bastnasite [(Ce,La)(CO3)F], which is found with dolomite and calcite ( 65 %), barite (20 - 25 %), plus a number of minor accessory minerals including sulfides such as galena and pyrite. Generally, alkaline intrusion-related REE deposits either occur in layered complexes or with dikes and veins cutting alkaline intrusions. Such intrusions have a more diverse group of REE ore minerals that include fluorcarbonates, oxides, silicates, and phosphates. Ore also can include minor calcite and iron (Fe), lead (Pb), and zinc (Zn) sulfides. The acid-generating potential of both deposit types is low because of a predominance of carbonate minerals in the carbonatite deposits, the presence of feldspars and minor calcite in alkaline intrusion-related deposits, and to only minor to trace occurrence of potentially acid-generating sulfide minerals. Both deposit types, however, are produced by igneous and hydrothermal processes that enrich high-field strength, incompatible elements, which typically are excluded from common rock-forming minerals. Elements such as yttrium (Y), niobium Nb), zirconium (Zr), hafnium (Hf), tungsten (W), titanium (Ti), tantalum (Ta), scandium (Sc), thorium (Th), and uranium (U) can be characteristic of these deposits and may be of environmental concern. Most of these elements, including the REEs, but with the exception of U, have low solubilities in water at the near-neutral pH values expected around these deposits. Mill tailings from carbonatite deposits can exceed residential soil and sediment criteria for Pb, and leachates from mill tailings can exceed drinking water guidelines for Pb. The greatest environmental challenges, however, are

Extrusion cooking: Legume pulses

USDA-ARS?s Scientific Manuscript database

Extrusion is used commercially to produce high value breakfast and snack foods based on cereals such as wheat or corn. However, this processing method is not being commercially used for legume pulses seeds due to the perception that they do not expand well in extrusion. Extrusion cooking of pulses (...

Partitioning of Mg, Ca, and Na between carbonatite melt and hydrous fluid at 0.1-0.2 GPa

NASA Astrophysics Data System (ADS)

Veksler, Ilya V.; Keppler, Hans

Experimental studies of the element distribution between carbonatite melts and hydrous fluids are hampered by the fact that neither the fluid nor the melt can be isochemically quenched in conventional high-pressure vessels. In order to overcome this problem, we used a double-capsule technique to separate immiscible fluid and melt phases during and after the runs. The inner platinum capsules were charged with carbonate mixtures (CaCO3, MgCO3 and Na2CO3) and placed inside the outer capsules charged with distilled water and diamond powder. The latter was used as an inert trap for solids precipitating from the fluid on quenching. Carbonate melt and hydrous fluid equilibrated through a small hole left in the upper end of the inner capsule. The runs were performed in rapid-quench cold-seal pressure vessels at 0.1-0.2 GPa and 700-900°C in the two-phase (fluid+melt) stability region. Both quenched melt and quenched fluid were dissolved in dilute HCl and analysed by inductively coupled plasma atomic emission spectroscopy. The results show that under all conditions investigated, fluid/melt partition coefficients for Ca and Mg are similar and several times smaller than those for Na. At 0.1 GPa and a water/carbonatite ratio of 1 (by weight), the partition coefficients are DNa= 0.35+/- 0.02, DCa=0.09+/-0.02, and DMg=0.13+/- 0.01. Between 700 and 900°C, the effect of temperature on partitioning is negligible. However, DNa increases significantly with decreasing water/carbonatite ratio in the system. Our data show that the release of a hydrous fluid enriched in sodium and simultaneous crystallisation of calcite can transform an alkaline, vapour-saturated carbonatite melt into a body of pure calcite surrounded by zones of sodium metasomatism. Thus, it is quite possible that carbonate magmas with substantial amounts of alkalies were common parental liquids of plutonic carbonatites.

From Carbonatite to Ikaite: How high-T carbonates are transformed into low-T carbonate minerals in SW Greenland

NASA Astrophysics Data System (ADS)

Stockmann, G. J.; Tollefsen, E.; Ranta, E.; Skelton, A.; Sturkell, E.; Lundqvist, L.

2015-12-01

The 1300 Ma Grønnedal-Íka igneous complex in southwest Greenland comprises nepheline syenites and carbonatites. It belongs to a suite of intrusions formed 1300-1100 Ma ago referred to as the Gardar period. In modern time (the last ca. 8000 years), fluid-rock interactions involving the nepheline syenites and carbonatites gives rise to about one thousand submarine columns made of the rare low-T mineral ikaite (CaCO3x6H2O). The columns are found in a shallow, narrow fjord named Ikka Fjord and their distribution clearly follows the outcrop of the Grønnedal-Íka complex. When meteoric water percolates through the highly fractured complex, a sodium carbonate solution of pH 10 is formed through hitherto unknown fluid-rock reactions. This basic solution seeps up through fractures at the bottom of Ikka Fjord and when mixed with seawater, the mineral ikaite is formed. As the seepage water has a lower density than seawater, there is an upwards flow that creates columns. What is peculiar about ikaite is its limited stability making it unstable above +6 °C. Isotopic studies of ikaite reveal a seawater origin for the Ca2+ ions, and the carbonatite being the most likely source for the CO32- ions. The carbonatite is mainly of søvite composition (CaCO3) with high contents of siderite and ankerite in certain areas. The nepheline syenites contain Na,K-rich minerals like nepheline, alkali-feldspar, aegirine-augite, katophorite and biotite. Nepheline is mainly replaced by muscovite, and aegirine-augite partly by chlorite, which could release sodium into solution. A dolerite dyke of unknown age prompted extensive mineralization of magnetite by activating hydrothermal fluid convection. The fluid interacted with the carbonatite, replacing siderite and ankerite by magnetite and later hematite. In a newly launched project at Stockholm University, we are trying to unravel the chemical reactions taking place inside the Grønnedal-Íka igneous complex leading to the formation of the

Mathematical modeling of hydromechanical extrusion

NASA Astrophysics Data System (ADS)

Agapitova, O. Yu.; Byvaltsev, S. V.; Zalazinsky, A. G.

2017-12-01

The mathematical modeling of the hydromechanical extrusion of metals through two sequentially installed cone dies is carried out. The optimum parameters of extrusion tools are determined to minimize the extrusion force. A software system has been developed to solve problems of plastic deformation of metals and to provide an optimum design of extrusion tools.

Iron Hill (Powderhorn) carbonatite complex, Gunnison County, CO - A potential source of several uncommon mineral resources

USGS Publications Warehouse

Van Gosen, B. S.; Lowers, H.A.

2007-01-01

The Iron Hill (Powderhorn) carbonatite complex is a 31-kM2 (12-sq mile) alkalic intrusion located about 35 km (22 miles) south-southwest of Gunnison, CO. The intrusion has been well studied and described because of its classic petrology and architecture ofa carbonatite-alkalic complex. The complex is also noteworthy because it contains enrichments of titanium, rare earth elements, thorium, niobium (columbium), vanadium and deposits of vermiculite and nepheline syenite. In particular, the complex is thought to host the largest titanium and niobium resources in the United States, although neither has been developed. It may be economic to extract multiple resources from this complex with a well-coordinated mine and mill plan.

Geochemistry of Rock Samples Collected from the Iron Hill Carbonatite Complex, Gunnison County, Colorado

USGS Publications Warehouse

Van Gosen, Bradley S.

2008-01-01

A study conducted in 2006 by the U.S. Geological Survey collected 57 surface rock samples from nine types of intrusive rock in the Iron Hill carbonatite complex. This intrusive complex, located in Gunnison County of southwestern Colorado, is known for its classic carbonatite-alkaline igneous geology and petrology. The Iron Hill complex is also noteworthy for its diverse mineral resources, including enrichments in titanium, rare earth elements, thorium, niobium (columbium), and vanadium. This study was performed to reexamine the chemistry and metallic content of the major rock units of the Iron Hill complex by using modern analytical techniques, while providing a broader suite of elements than the earlier published studies. The report contains the geochemical analyses of the samples in tabular and digital spreadsheet format, providing the analytical results for 55 major and trace elements.

Magmatism and fenitization in the Cretaceous potassium-alkaline-carbonatitic complex of Ipanema São Paulo State, Brazil

NASA Astrophysics Data System (ADS)

Guarino, Vincenza; Azzone, Rogério Guitarrari; Brotzu, Pietro; de Barros Gomes, Celso; Melluso, Leone; Morbidelli, Lucio; Ruberti, Excelso; Tassinari, Colombo Celso Gaeta; Brilli, Mauro

2012-01-01

The Ipanema alkaline-carbonatitic complex is part of the Meso-Cenozoic alkaline magmatism located within the southeastern part of the Brazilian Platform. Drill-core and field sampling have indicated the occurrence of glimmerites, with subordinate shonkinites (mela-syenites), clinopyroxene-bearing glimmerites, diorites and syenites. The glimmerites are cross-cut by lamprophyric dykes and calciocarbonatites. Fenitization has deeply affected the country rocks, originating dioritic and syenitic rocks. The Ipanema rocks show a distinct potassic affinity. The initial Sr-Nd- isotopic composition of the Ipanema rocks (87Sr/86Sr = 0.70661-0.70754 and 143Nd/144Nd = 0.51169-0.51181) is similar to that of tholeiitic and potassium-rich-alkaline rocks of the Eastern Paraguay. Stable isotope data for the Ipanema calciocarbonatite suggest interaction with fluids at temperatures typical of hydrothermal stages, as hypothesized for other carbonatite complexes from southeastern Brazil. The chemical differences between the lamprophyre, glimmerites, carbonatites, apatitites and magnetitites, and the absence of marked REE enrichment in the evolved lithologies, all indicate that fractional crystallization and accumulus of liquidus phases in a magma reservoir, likely coupled with liquid immiscibility processes, may have played an important role in the genesis of the Ipanema rocks.

Noble gas composition of Indian carbonatites (Amba Dongar, Siriwasan): Implications on mantle source compositions and late-stage hydrothermal processes

NASA Astrophysics Data System (ADS)

Hopp, Jens; Viladkar, Shrinivas G.

2018-06-01

Within a stepwise crushing study we determined the noble gas composition of several calcite separates, one aegirine and one pyrochlore-aegirine separate of the carbonatite ring dyke complex of Amba Dongar and carbonatite sill complex of Siriwasan, India. Both carbonatites are related to the waning stages of volcanic activity of the Deccan Igneous Province ca. 65 Ma ago. Major observations are a clear radiogenic 4He* and nucleogenic 21Ne* imprint related to in situ production from U and Th in mineral impurities, most likely minute apatite grains, or late incorporation of crustal fluids. However, in first crushing steps of most calcites from Amba Dongar a well-resolvable mantle neon signal is observed, with lowest air-corrected mantle 21Ne/22Ne-compositions equivalent to the Réunion hotspot mantle source. In case of the aegirine separate from Siriwasan we found a neon composition similar to the Loihi hotspot mantle source. This transition from a mantle plume signal in first crushing step to a more nucleogenic signature with progressive crushing indicates the presence of an external (crustal) or in situ nucleogenic component unrelated and superposed to the initial mantle neon component whose composition is best approximated by results of first crushing step(s). This contradicts previous models of a lithospheric mantle source of the carbonatitic magmas from Amba Dongar containing recycled crustal components which base on nucleogenic neon compositions. Instead, the mantle source of both investigated carbonatite complexes is related to a primitive mantle plume source that we tentatively ascribe to the postulated Deccan mantle plume. If, as is commonly suggested, the present location of the Deccan mantle plume source is below Réunion Island, the currently observed more nucleogenic neon isotopic composition of the Réunion hotspot might be obliterated by significant upper mantle contributions. In addition, compared with other carbonatite complexes worldwide a rather

Carbonatites of the World, Explored Deposits of Nb and REE - Database and Grade and Tonnage Models

USGS Publications Warehouse

Berger, Vladimir I.; Singer, Donald A.; Orris, Greta J.

2009-01-01

This report is based on published tonnage and grade data on 58 Nb- and rare-earth-element (REE)-bearing carbonatite deposits that are mostly well explored and are partially mined or contain resources of these elements. The deposits represent only a part of the known 527 carbonatites around the world, but they are characterized by reliable quantitative data on ore tonnages and grades of niobium and REE. Grade and tonnage models are an important component of mineral resource assessments. Carbonatites present one of the main natural sources of niobium and rare-earth elements, the economic importance of which grows consistently. A purpose of this report is to update earlier publications. New information about known deposits, as well as data on new deposits published during the last decade, are incorporated in the present paper. The compiled database (appendix 1; linked to right) contains 60 explored Nb- and REE-bearing carbonatite deposits - resources of 55 of these deposits are taken from publications. In the present updated grade-tonnage model we have added 24 deposits comparing with the previous model of Singer (1998). Resources of most deposits are residuum ores in the upper part of carbonatite bodies. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types are present in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment, and the grade and tonnage models allow economists to

Carbonatitic and granitic melts produced under conditions of primary immiscibility during anatexis in the lower crust

NASA Astrophysics Data System (ADS)

Ferrero, Silvio; Wunder, Bernd; Ziemann, Martin A.; Wälle, Markus; O'Brien, Patrick J.

2016-11-01

Carbonatites are peculiar magmatic rocks with mantle-related genesis, commonly interpreted as the products of melting of CO2-bearing peridotites, or resulting from the chemical evolution of mantle-derived magmas, either through extreme differentiation or secondary immiscibility. Here we report the first finding of anatectic carbonatites of crustal origin, preserved as calcite-rich polycrystalline inclusions in garnet from low-to-medium pressure migmatites of the Oberpfalz area, SW Bohemian Massif (Central Europe). These inclusions originally trapped a melt of calciocarbonatitic composition with a characteristic enrichment in Ba, Sr and LREE. This interpretation is supported by the results of a detailed microstructural and microchemical investigation, as well as re-melting experiments using a piston cylinder apparatus. Carbonatitic inclusions coexist in the same cluster with crystallized silicate melt inclusions (nanogranites) and COH fluid inclusions, suggesting conditions of primary immiscibility between two melts and a fluid during anatexis. The production of both carbonatitic and granitic melts during the same anatectic event requires a suitable heterogeneous protolith. This may be represented by a sedimentary sequence containing marble lenses of limited extension, similar to the one still visible in the adjacent central Moldanubian Zone. The presence of CO2-rich fluid inclusions suggests furthermore that high CO2 activity during anatexis may be required to stabilize a carbonate-rich melt in a silica-dominated system. This natural occurrence displays a remarkable similarity with experiments on carbonate-silicate melt immiscibility, where CO2 saturation is a condition commonly imposed. In conclusion, this study shows how the investigation of partial melting through melt inclusion studies may unveil unexpected processes whose evidence, while preserved in stiff minerals such as garnet, is completely obliterated in the rest of the rock due to metamorphic re

Etching Behavior of Aluminum Alloy Extrusions

NASA Astrophysics Data System (ADS)

Zhu, Hanliang

2014-11-01

The etching treatment is an important process step in influencing the surface quality of anodized aluminum alloy extrusions. The aim of etching is to produce a homogeneously matte surface. However, in the etching process, further surface imperfections can be generated on the extrusion surface due to uneven materials loss from different microstructural components. These surface imperfections formed prior to anodizing can significantly influence the surface quality of the final anodized extrusion products. In this article, various factors that influence the materials loss during alkaline etching of aluminum alloy extrusions are investigated. The influencing variables considered include etching process parameters, Fe-rich particles, Mg-Si precipitates, and extrusion profiles. This study provides a basis for improving the surface quality in industrial extrusion products by optimizing various process parameters.

Carbonate, Halide, and Other New Mineral Inclusions in Diamond and Deep-Seated Carbonatitic Magma

NASA Astrophysics Data System (ADS)

Kaminsky, F.; Wirth, R.; Matsyuk, S.

2009-05-01

A series of uncommon micro- and nano-inclusions was identified in diamonds from the Juina area: carbonates, halides, and others. Carbonates are represented by calcite (with Sr and Ba), K-rich nyerereite (K2O = 10.0-13.78 wt. %), and nahcolite. Halides are NaCl, KCl, CaCl2 and PbCl2. Minerals of the periclase- wüstite series belong to two separate groups: wüstite and Mg-wüstite with Mg# = 1.9-15.3, and Fe-periclase and periclase with Mg# = 84.9-92.1. Wollastonite-II (high, Ca: Si = 0.992) has a triclinic structure. Ca-rich garnet has a noticeable admixture of Zr; it belongs to the andradite - kimzeyite - schorlomite group. Two types of spinel were distinguished among mineral inclusions in diamond: zoned magnesioferrite (with Mg# varying from 13.5 in a core to 90.8 in a rim) and Fe-spinel (magnetite). Olivine (Mg# = 93.6), intergrown with nyerereite, forms elongated, lath-shaped crystal and, probably, is a retrograde transformation of ringwoodite or wadsleyite. Some apatite grains are enriched in La, Ce and Nd. Among other minerals, there are anhydrite, cuspidine, phlogopite, TiO2 with an α-PbO2 structure, native Fe. All inclusions are polymineralic solid inclusions. These minerals form a carbonatitic-type mineral association in diamond which may have been originated in lower mantle and/or transition zone. Wüstite inclusions with Mg# = 1.9-3.4, according to the experimental data, may have been formed in the lowermost mantle. The source for the observed carbonatitic-type mineral association in diamond is deep-seated carbonatitic, most likely natrocarbonatitic magma.

The 2005 and 2006 eruptions of Ol Doinyo Lengai: assessing deep and shallow processes at an active carbonatite volcano using volatile chemistry and fluxes

NASA Astrophysics Data System (ADS)

Fischer, T.; Burnard, P.; Marty, B.; Palhol, F.; Mangasini, F.; Shaw, A. M.

2006-12-01

The African Rift valleys are sites of classical carbonatite volcano complexes. Ol Doinyo Lengai, the spectacular cone that rises to nearly 3000 m above Tanzania's Eastern Rift Valley, is the world's only active carbonatite volcano. High-alkali carbonatite lavas from this volcano were first recognized in the 1960's and the oldest natrocarbonatite tuffs have been dated to 1250 years B.P.. Earlier eruptions produced phonolitic and nephelinitc lavas [1]. Since the 1960's the volcano has erupted frequently producing carbonatite lava flows. Explosive eruptions are much less frequent but have occurred in 1966, 1983 [1] and 1993 [3] producing ash, cones and natrocarbonatite tephra. In July 2005, we launched an expedition to the crater to collect gas and rock samples. On July 4, the volcano began erupting low viscosity, low T (540C) high velocity (2 m/sec) lava flows at a rate of about 0.3 m3/sec. By afternoon, the lava was flowing over the eastern crater rim. During the eruption we sampled gases from nearby hornitos at 120 and 168C, yielding pristine magmatic gases characterized by 75 mol% H2O, 22% CO2, < 1% SO2, H2S, HCl and traces of H2, He, Ar, N2, CH4 and CO. CO2-CH4-CO gas equilibrium temperatures are 580C consistent with lava flow temperatures. N2-He-Ar abundances indicate an upper mantle origin of volatiles, confirmed by isotopes [4]. SO2 flux measured by mini DOAS was low (10 t/day). CO2 fluxes calculated using CO2/SO2 are 3000 to 4000 t/day. Volatiles measured in the carbonatite lavas by SIMS show low H2O (< 0.7 wt%), high S (0.2 to 1 wt%) and Cl (0.6 to 1.4 wt%) and variable F (0.06 to 0.7 wt%). CO2 contents are 30 wt% with major and trace elements typical of natrocarbonatite lavas previously reported in [1]. The release of all CO2 (30 wt% or 20 t/day) from eruption lavas would only produce a small fraction of the measured CO2. In March 2006 eyewitnesses [3] reported the occurrence of an explosive eruption and some of us returned to the volcano on May 12. The

A major light rare-earth element (LREE) resource in the Khanneshin carbonatite complex, southern Afghanistan

USGS Publications Warehouse

Tucker, Robert D.; Belkin, Harvey E.; Schulz, Klaus J.; Peters, Stephen G.; Horton, Forrest; Buttleman, Kim; Scott, Emily R.

2012-01-01

The rapid rise in world demand for the rare-earth elements (REEs) has expanded the search for new REE resources. We document two types of light rare-earth element (LREE)-enriched rocks in the Khanneshin carbonatite complex of southern Afghanistan: type 1 concordant seams of khanneshite-(Ce), synchysite-(Ce), and parisite-(Ce) within banded barite-strontianite alvikite, and type 2 igneous dikes of coarse-grained carbonatite, enriched in fluorine or phosphorus, containing idiomorphic crystals of khanneshite-(Ce) or carbocernaite. Type 1 mineralized barite-strontianite alvikite averages 22.25 wt % BaO, 4.27 wt % SrO, and 3.25 wt % ∑ LREE2O3 (sum of La, Ce, Pr, and Nd oxides). Type 2 igneous dikes average 14.51 wt % BaO, 5.96 wt % SrO, and 3.77 wt % ∑ LREE2O3. A magmatic origin is clearly indicated for the type 2 LREE-enriched dikes, and type 1 LREE mineralization probably formed in the presence of LREE-rich hydrothermal fluid. Both types of LREE mineralization may be penecontemporaneous, having formed in a carbonate-rich magma in the marginal zone of the central vent, highly charged with volatile constituents (i.e., CO2, F, P2O5), and strongly enriched in Ba, Sr, and the LREE. Based on several assumptions, and employing simple geometry for the zone of LREE enrichment, we estimate that at least 1.29 Mt (million metric tonnes) of LREE2O3 is present in this part of the Khanneshin carbonatite complex.

Calcite and dolomite in intrusive carbonatites. II. Trace-element variations

NASA Astrophysics Data System (ADS)

Chakhmouradian, Anton R.; Reguir, Ekaterina P.; Couëslan, Christopher; Yang, Panseok

2016-04-01

The composition of calcite and dolomite from several carbonatite complexes (including a large set of petrographically diverse samples from the Aley complex in Canada) was studied by electron-microprobe analysis and laser-ablation inductively-coupled-plasma mass-spectrometry to identify the extent of substitution of rare-earth and other trace elements in these minerals and the effects of different igneous and postmagmatic processes on their composition. Analysis of the newly acquired and published data shows that the contents of rare-earth elements (REE) and certain REE ratios in magmatic calcite and dolomite are controlled by crystal fractionation of fluorapatite, monazite and, possibly, other minerals. Enrichment in REE observed in some samples (up to ~2000 ppm in calcite) cannot be accounted for by coupled substitutions involving Na, P or As. At Aley, the REE abundances and chondrite-normalized (La/Yb)cn ratios in carbonates decrease with progressive fractionation. Sequestration of heavy REE from carbonatitic magma by calcic garnet may be responsible for a steeply sloping "exponential" pattern and lowered Ce/Ce* ratios of calcite from Magnet Cove (USA) and other localities. Alternatively, the low levels of Ce and Mn in these samples could result from preferential removal of these elements by Ce4+- and Mn3+-bearing minerals (such as cerianite and spinels) at increasing f(O2) in the magma. The distribution of large-ion lithophile elements (LILE = Sr, Ba and Pb) in rock-forming carbonates also shows trends indicative of crystal fractionation effects (e.g., concomitant depletion in Ba + Pb at Aley, or Sr + Ba at Kerimasi), although the phases responsible for these variations cannot be identified unambiguously at present. Overall, element ratios sensitive to the redox state of the magma and its complexing characteristics (Eu/Eu*, Ce/Ce* and Y/Ho) are least variable and in both primary calcite and dolomite, approach the average chondritic values. In consanguineous

A deposit model for carbonatite and peralkaline intrusion-related rare earth element deposits: Chapter J in Mineral deposit models for resource assessment

USGS Publications Warehouse

Verplanck, Philip L.; Van Gosen, Bradley S.; Seal, Robert R.; McCafferty, Anne E.

2014-01-01

The greatest environmental challenges associated with carbonatite and peralkaline intrusion-related rare earth element deposits center on the associated uranium and thorium. Considerable uncertainty exists around the toxicity of rare earth elements and warrants further investigation. The acid-generating potential of carbonatites and peralkaline intrusion-related deposits is low due to the dominance of carbonate minerals in carbonatite deposits, the presence of feldspars and minor calcite within the alkaline intrusion deposits, and only minor quantities of potentially acid-generating sulfides. Therefore, acid-drainage issues are not likely to be a major concern associated with these deposits. Uranium has the potential to be recovered as a byproduct, which would mitigate some of its environmental effects. However, thorium will likely remain a waste-stream product that will require management since progress is not being made towards the development of thorium-based nuclear reactors in the United States or other large scale commercial uses. Because some deposits are rich in fluorine and beryllium, these elements may be of environmental concern in certain locations.

The origin of secondary heavy rare earth element enrichment in carbonatites: Constraints from the evolution of the Huanglongpu district, China

NASA Astrophysics Data System (ADS)

Smith, M.; Kynicky, J.; Xu, Cheng; Song, Wenlei; Spratt, J.; Jeffries, T.; Brtnicky, M.; Kopriva, A.; Cangelosi, D.

2018-05-01

The silico‑carbonatite dykes of the Huanglongpu area, Lesser Qinling, China, are unusual in that they are quartz-bearing, Mo-mineralised and enriched in the heavy rare earth elements (HREE) relative to typical carbonatites. The textures of REE minerals indicate crystallisation of monazite-(Ce), bastnäsite-(Ce), parisite-(Ce) and aeschynite-(Ce) as magmatic phases. Burbankite was also potentially an early crystallising phase. Monazite-(Ce) was subsequently altered to produce a second generation of apatite, which was in turn replaced and overgrown by britholite-(Ce), accompanied by the formation of allanite-(Ce). Bastnäsite and parisite where replaced by synchysite-(Ce) and röntgenite-(Ce). Aeschynite-(Ce) was altered to uranopyrochlore and then pyrochlore with uraninite inclusions. The mineralogical evolution reflects the evolution from magmatic carbonatite, to more silica-rich conditions during early hydrothermal processes, to fully hydrothermal conditions accompanied by the formation of sulphate minerals. Each alteration stage resulted in the preferential leaching of the LREE and enrichment in the HREE. Mass balance considerations indicate hydrothermal fluids must have contributed HREE to the mineralisation. The evolution of the fluorcarbonate mineral assemblage requires an increase in aCa2+ and aCO32- in the metasomatic fluid (where a is activity), and breakdown of HREE-enriched calcite may have been the HREE source. Leaching in the presence of strong, LREE-selective ligands (Cl-) may account for the depletion in late stage minerals in the LREE, but cannot account for subsequent preferential HREE addition. Fluid inclusion data indicate the presence of sulphate-rich brines during alteration, and hence sulphate complexation may have been important for preferential HREE transport. Alongside HREE-enriched magmatic sources, and enrichment during magmatic processes, late stage alteration with non-LREE-selective ligands may be critical in forming HREE

Developing Orthopaedic Trauma Capacity in Uganda: Considerations From the Uganda Sustainable Trauma Orthopaedic Program.

PubMed

OʼHara, Nathan N; OʼBrien, Peter J; Blachut, Piotr A

2015-10-01

Uganda, like many low-income countries, has a tremendous volume of orthopaedic trauma injuries. The Uganda Sustainable Trauma Orthopaedic Program (USTOP) is a partnership between the University of British Columbia and Makerere University that was initiated in 2007 to reduce the consequences of neglected orthopaedic trauma in Uganda. USTOP works with local collaborators to build orthopaedic trauma capacity through clinical training, skills workshops, system support, technology development, and research. USTOP has maintained a multidisciplinary approach to training, involving colleagues in anaesthesia, nursing, rehabilitation, and sterile reprocessing. Since the program's inception, the number of trained orthopaedic surgeons practicing in Uganda has more than doubled. Many of these newly trained surgeons provide clinical care in the previously underserved regional hospitals. The program has also worked with collaborators to develop several technologies aimed at reducing the cost of providing orthopaedic care without compromising quality. As orthopaedic trauma capacity in Uganda advances, USTOP strives to continually evolve and provide relevant support to colleagues in Uganda.

Extrusion and Extruded Products: Changes in Quality Attributes as Affected by Extrusion Process Parameters: A Review.

PubMed

Alam, M S; Kaur, Jasmeen; Khaira, Harjot; Gupta, Kalika

2016-01-01

Extrusion of foods is an emerging technology for the food industries to process and market a large number of products of varying size, shape, texture, and taste. Extrusion cooking technology has led to production of wide variety of products like pasta, breakfast cereals, bread crumbs, biscuits, crackers, croutons, baby foods, snack foods, confectionery items, chewing gum, texturized vegetable protein (TVP), modified starch, pet foods, dried soups, dry beverage mixes etc. The functional properties of extruded foods plays an important role for their acceptability which include water absorption, water solubility, oil absorption indexes, expansion index, bulk density and viscosity of the dough. The aim of this review is to give the detailed outlines about the potential of extrusion technology in development of different types of products and the role of extrusion-operating conditions and their effect on product development resulting in quality changes i.e physical, chemical, and nutritional, experienced during the extrusion process.

Modelling highly deformable metal extrusion using SPH

NASA Astrophysics Data System (ADS)

Prakash, Mahesh; Cleary, Paul W.

2015-05-01

Computational modelling is often used to reduce trial extrusions through accurate defect prediction. Traditionally, metal extrusion is modelled using mesh based finite element methods. However, large plastic deformations can lead to heavy re-meshing and numerical diffusion. Here we use the mesh-less smoothed particle hydrodynamics method since it allows simulation of large deformations without re-meshing and the tracking of history dependent properties such as plastic strain making it suitable for defect prediction. The variation in plastic strain and deformation for aluminium alloy in a cylindrical 3D geometry with extrusion ratio and die angle is evaluated. The extrusion process is found to have three distinct phases consisting of an initial sharp rise in extrusion force, a steady phase requiring constant force and terminating in a sharp decline in force as metal is completely extruded. Deformation and plastic strain increased significantly with extrusion ratio but only moderately with die angle. Extrusion force increased by 150 % as the extrusion ratio increased from 2:1 to 4:1 but had only a marginal change with die angle. A low strain zone in the centre of the extruded product was found to be a function of extrusion ratio but was persistent and did not vary with die angle. Simulation of a complex 3D building industry component showed large variations in plastic strain along the length of the product at two scales. These were due to change in metal behaviour as extrusion progressed from phase 1 to phase 2. A stagnation zone at the back of the die was predicted that could lead to the "funnel" or "pipe" defect.

75 FR 80527 - Aluminum Extrusions From China

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

...)] Aluminum Extrusions From China AGENCY: United States International Trade Commission. ACTION: Scheduling of... of subsidized and less-than-fair-value imports from China of aluminum extrusions, primarily provided... contained in Aluminum Extrusions From the People's Republic of China: Notice of Preliminary Determination of...

Reactive Transport of Slab-Derived Carbonatitic Melts in the Deep Upper Mantle and Generation of Kimberlites

NASA Astrophysics Data System (ADS)

Sun, C.; Dasgupta, R.

2017-12-01

Kimberlite is a diamond-bearing CO2-rich ultramafic magma from the mantle at depths of >200 km, featured by enrichment of incompatible elements [1]. It has been considered significant for understanding mantle geochemistry and particularly for providing information of deep carbon cycle. Recent experimental studies suggested that partial melts of carbonated peridotites at high pressures and temperatures could resemble the MgO (>20 wt%) and enriched incompatible elements in kimberlites only when the source experienced refertilization with perhaps prior depletion (e.g., [2]). Although addition of CO2 and incompatible elements in the deep mantle is often linked to subducted components, partial melts directly from carbonated oceanic crusts do not have high enough MgO (e.g., ≤8.2 wt%; [3]). A crucial question is how slab-derived CO2-rich melt evolves in reaction with ambient mantle, which may provide a feasible mechanism for kimberlite generation. To investigate the fate of slab-derived carbonatitic melt in the deep ambient mantle, we have performed multi-anvil experiments at 7-10 GPa and 1400-1450 °C. The starting compositions were synthesized by mixing a fertile peridotite composition, KLB-1, with variable proportions (0-45 wt.%) of Ca-rich carbonatitic melt similar to those derived from a carbonated ocean crust at 13-21 GPa [3]. Experiments were performed in Pt, Pt/Gr, Au-Pd and Au-Pd/Gr capsules, and the experimental phases include olivine ± opx + cpx + majoritic garnet ± carbonated silicate melt. With the increase of melt-rock ratios, experimental melts become progressively enriched in CaO (13.0-23.1 wt%) and CO2 (14.2-38.7 wt%) but depleted in MgO (28.9-19.9 wt%), SiO2 (33.1-7.9 wt%), and Al2O3 (2.7-0.2 wt%). The net flux of melt increases with the increase of infiltrating carbonatitic melt proportion and with the decrease of pressure. Kimberlite melts were produced from experiments with 5-25 wt% infiltrating carbonatitic melts by dissolution of olivine and

Effects of extrusion conditions on the extrusion responses and the quality of brown rice pasta.

PubMed

Wang, Li; Duan, Wei; Zhou, Sumei; Qian, Haifeng; Zhang, Hui; Qi, Xiguang

2016-08-01

This research investigated the effects of extrusion temperature and screw speed on the extrusion system parameters and the qualities of brown rice pasta. The die pressure and motor torque value reached a maximum at 90°C but decreased when the screw speed increased from 80 to 120rpm. The extrusion temperature and screw speed also significantly affected the cooking quality and textural properties of brown rice pasta. The pasta produced at an extrusion temperature of 120°C and screw speed of 120rpm had the best quality with a cooking loss, hardness and adhesiveness of 6.7%, 2387.2g and -7.0g⋅s, respectively, similar to those of pasta made from gluten-free flour. The results indicated that brown rice can be used to produce gluten-free pasta with improved nutrition. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Iron Hill (Powderhorn) Carbonatite Complex, Gunnison County, Colorado - A Potential Source of Several Uncommon Mineral Resources

USGS Publications Warehouse

Van Gosen, Bradley S.

2009-01-01

A similar version of this slide show was presented on three occasions during 2008: two times to local chapters of the Society for Mining, Metallurgy, and Exploration (SME), as part of SME's Henry Krumb lecture series, and the third time at the Northwest Mining Association's 114th Annual Meeting, held December 1-5, 2008, in Sparks (Reno), Nevada. In 2006, the U.S. Geological Survey (USGS) initiated a study of the diverse and uncommon mineral resources associated with carbonatites and associated alkaline igneous rocks. Most of these deposit types have not been studied by the USGS during the last 25 years, and many of these mineral resources have important applications in modern technology. The author chose to begin this study at Iron Hill in southwestern Colorado because it is the site of a classic carbonatite complex, which is thought to host the largest known resources of titanium and niobium in the United States.

How extrusion shapes food processing

USDA-ARS?s Scientific Manuscript database

This month's column will explore food extrusion. Extrusion is one of the most commonly used food manufacturing processes. Its versatility enables production of a diverse array of food products. This column will review the basic principles and provide an overview of applications. I would like to ...

Extrusion without a motor: a new take on the loop extrusion model of genome organization

PubMed Central

Johnson, J.; Michieletto, D.; Morozov, A. N.; Nicodemi, M.; Cook, P. R.; Marenduzzo, D.

2018-01-01

ABSTRACT Chromatin loop extrusion is a popular model for the formation of CTCF loops and topological domains. Recent HiC data have revealed a strong bias in favour of a particular arrangement of the CTCF binding motifs that stabilize loops, and extrusion is the only model to date which can explain this. However, the model requires a motor to generate the loops, and although cohesin is a strong candidate for the extruding factor, a suitable motor protein (or a motor activity in cohesin itself) has yet to be found. Here we explore a new hypothesis: that there is no motor, and thermal motion within the nucleus drives extrusion. Using theoretical modelling and computer simulations we ask whether such diffusive extrusion could feasibly generate loops. Our simulations uncover an interesting ratchet effect (where an osmotic pressure promotes loop growth), and suggest, by comparison to recent in vitro and in vivo measurements, that diffusive extrusion can in principle generate loops of the size observed in the data. Extra View on : C. A. Brackley, J. Johnson, D. Michieletto, A. N. Morozov, M. Nicodemi, P. R. Cook, and D. Marenduzzo “Non-equilibrium chromosome looping via molecular slip-links”, Physical Review Letters 119 138101 (2017) PMID:29300120

Extrusion die and method

DOEpatents

Lipp, G. Daniel

1994-04-26

A method and die apparatus for manufacturing a honeycomb body of rhombic cell cross-section by extrusion through an extrusion die of triangular cell discharge slot configuration, the die incorporating feedholes at selected slot intersections only, such that slot segments communicating directly with the feedholes discharge web material and slot segments not so connected do not discharge web material, whereby a rhombic cell cross-section in the extruded body is provided.

CO2-rich phonolitic melt and carbonatite immiscibility in melt inclusions in nephelinite (Hanang volcano, North Tanzanian Divergence, East African Rift).

NASA Astrophysics Data System (ADS)

Baudouin, C.; Parat, F.

2016-12-01

Hanang is the southern volcano of the East branch of the East African Rift and represents volcanic activity at early stage rifting (0.9 Ma). Lavas are highly alkaline Mg-poor nephelinites (Mg#=24.4-35.2) with cpx, garnet, nepheline, titanite, and apatite and result from fractional crystallisation of primary melilitite magmas (Parat et al. AGU2016). In this study, we investigate glassy melt inclusions at the rim of nepheline phenocrysts to constrain the late stage of nephelinite evolution and the behaviour of volatiles (CO2, H2O, S, F, Cl) during magma storage and ascent. The melt inclusions have a green silicate glass, a microcrystalline carbonate phase and a shrinkage bubble free of gas phase (Raman analyses) suggesting that carbonatite-silicate liquid immiscibility (85:15) occurred during nephelinite differentiation. The silicate glasses have trachytic composition (Na+K/Al=1.6-7.2, SiO2=54-65.5 wt%) with high CO2 (0.43 wt% CO2, SIMS analyses), sulfur (0.21-0.92 wt% S) and halogens (0.28-0.84 wt% Cl; 0.35-2.54 wt% F) content and very low H2O content (<0.1wt%, Raman analyses). The carbonate phase is an anhydrous Ca-Na±S,K- carbonate with 33 wt% CaO, 20 wt% Na2O, 3 wt% K2O, and 3 wt% S. The pre-immiscible silicate liquid (e.g. silicate melt + carbonatite) in equilibrium with nepheline and cpx phenocrysts has CO2-rich phonolitic composition (Na+K/Al=6.2-6.9) with 6 ± 1.5 wt% CO2 at pressure of 700-1100 MPa. The entrapped melt in nepheline corresponds to evolved interstitial silicate melt after crystallisation of cpx (16.7%), nepheline (40%) garnet (6.5%) and apatite (1.7%) from Mg-nephelinite magma. The immiscibility process leading to glassy silicate melt and microcrystalline carbonatitic melt occurred in closed system during rapid ascent at crustal level at 200-230 MPa. The absence of gas phase in shrinkage bubble in melt inclusions suggests CO2-undersaturated conditions during quenching. The absence of carbonatite lavas at Hanang volcano is then explained by

The system CaO-MgO-SiO2-CO2 at 1 GPa, metasomatic wehrlites, and primary carbonatite magmas

NASA Astrophysics Data System (ADS)

Lee, W. J.; Wyllie, P. J.

New experimental data in CaO-MgO-SiO2-CO2 at 1GPa define the vapor-saturated silicate-carbonate liquidus field boundary involving primary minerals calcite, forsterite and diopside. The eutectic reaction for melting of model calcite (1% MC)-wehrlite at 1GPa is at 1100°C, with liquid composition (by weight) 72% CaCO3 (CC), 9% MgCO3 (MC), and 18% CaMgSi2O6 (Di). These data combined with previous results permit construction of the isotherm-contoured vapor-saturated liquidus surface for the calcite/dolomite field, and part of the adjacent forsterite and diopside fields. Nearly pure calcite crystals in mantle xenoliths cannot represent equilibrium liquids. We recently determined the complete vapor-saturated liquidus surface between carbonates and model peridotites at 2.7GPa the peritectic reaction for dolomite (25% MC)-wehrlite at 2.7GPa occurs at 1300°C, with liquid composition 60% CC, 29% MC, and 11% Di. The liquidus field boundaries on these two surfaces provide the road-map for interpretation of magmatic processes in various peridotite-CO2 systems at depths between the Moho and about 100km. Relationships among kimberlites, melilitites, carbonatites and the liquidus phase boundaries are discussed. Experimental data for carbonatite liquid protected by metasomatic wehrlite have been reported. The liquid trends directly from dolomitic towards CaCO3 with decreasing pressure. The 1.5GPa liquid contains 87% CC and 4% Di, much lower in silicate components than our phase boundary. However, the liquids contain approximately the same CaCO3 (90+/- 1wt%) in terms of only carbonate components. For CO2-bearing mantle, all magmas at depth must pass through initial dolomitic compositions. Rising dolomitic carbonatite melt will vesiculate and may erupt as primary magmas through cracks from about 70km. If it percolates through metasomatic wehrlite from 70km toward the Moho at 35-40km, primary calcic siliceous carbonatite magma can be generated with silicate content at least 11

Electrical conductivity of basaltic and carbonatite melt-bearing peridotites at high pressures: Implications for melt distribution and melt fraction in the upper mantle

NASA Astrophysics Data System (ADS)

Yoshino, Takashi; Laumonier, Mickael; McIsaac, Elizabeth; Katsura, Tomoo

2010-07-01

Electrical impedance measurements were performed on two types of partial molten samples with basaltic and carbonatitic melts in a Kawai-type multi-anvil apparatus in order to investigate melt fraction-conductivity relationships and melt distribution of the partial molten mantle peridotite under high pressure. The silicate samples were composed of San Carlos olivine with various amounts of mid-ocean ridge basalt (MORB), and the carbonate samples were a mixture of San Carlos olivine with various amounts of carbonatite. High-pressure experiments on the silicate and carbonate systems were performed up to 1600 K at 1.5 GPa and up to at least 1650 K at 3 GPa, respectively. The sample conductivity increased with increasing melt fraction. Carbonatite-bearing samples show approximately one order of magnitude higher conductivity than basalt-bearing ones at the similar melt fraction. A linear relationship between log conductivity ( σbulk) and log melt fraction ( ϕ) can be expressed well by the Archie's law (Archie, 1942) ( σbulk/ σmelt = Cϕn) with parameters C = 0.68 and 0.97, n = 0.87 and 1.13 for silicate and carbonate systems, respectively. Comparison of the electrical conductivity data with theoretical predictions for melt distribution indicates that the model assuming that the grain boundary is completely wetted by melt is the most preferable melt geometry. The gradual change of conductivity with melt fraction suggests no permeability jump due to melt percolation at a certain melt fraction. The melt fraction of the partial molten region in the upper mantle can be estimated to be 1-3% and ˜ 0.3% for basaltic melt and carbonatite melt, respectively.

Hot-melt extrusion--basic principles and pharmaceutical applications.

PubMed

Lang, Bo; McGinity, James W; Williams, Robert O

2014-09-01

Originally adapted from the plastics industry, the use of hot-melt extrusion has gained favor in drug delivery applications both in academia and the pharmaceutical industry. Several commercial products made by hot-melt extrusion have been approved by the FDA, demonstrating its commercial feasibility for pharmaceutical processing. A significant number of research articles have reported on advances made regarding the pharmaceutical applications of the hot-melt extrusion processing; however, only limited articles have been focused on general principles regarding formulation and process development. This review provides an in-depth analysis and discussion of the formulation and processing aspects of hot-melt extrusion. The impact of physicochemical properties of drug substances and excipients on formulation development using a hot-melt extrusion process is discussed from a material science point of view. Hot-melt extrusion process development, scale-up, and the interplay of formulation and process attributes are also discussed. Finally, recent applications of hot-melt extrusion to a variety of dosage forms and drug substances have also been addressed.

LINER FOR EXTRUSION BILLET CONTAINERS

DTIC Science & Technology

Rokide-process alumina and zirconia coatings and a Udimet 700 superalloy liner were evaluated by extrusion of 3 1/2-in. billets of Inconel 713C...One coating did with stand extrusion at 3450 F without apparent wear. The Udimet 700 liner did not show wear at 2000 F, but did react with the TZM

Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fan, X.H.

Aluminum multi-port extrusion tube is processed by the porthole die extrusion and the internal tube walls are welded through the solid state metallurgical bonding. In order to observe the development of grains and their orientations under severe plastic deformation and solid state welding, the extrusion butt together with the die is quenched immediately after extrusion to preserve the grain structure in the processing. The forming histories of selected material points are obtained by analyzing the optical microscopy graph. The evolution of the microstructure along the forming path is characterized by electro backscattered diffraction. It is found that geometrical dynamic recrystallizationmore » happens in the process. Grains are elongated, scattered at the transition zone and shear intensive zone, and then pinched off when they are pushed out from the die orifice. The shear-type orientations are predominant at the surface layer on the longitudinal section of the tube web and have penetrated into the intermediate layer. The rolling-type orientations are formed at the central layer. Texture gradient through the thickness of the tube web is observed. And cube orientated grains are found at the seam weld region. - Highlights: •Microstructure of extrusion butt is preserved after the micro scale porthole die extrusion. •Grain morphology history along forming path is investigated. •Texture evolutions on three material flows are present. •Texture gradient exists on the longitudinal section of the internal wall of profile. •Rolling-type and cube textures are found at the solid state welding region.« less

In detail monazite characterization in a carbonatite weathering profile - a new tool for landscape geochronology

NASA Astrophysics Data System (ADS)

Renno, A. D.; Le Bras, L.; Ziegenrücker, R.; Couffignal, F.; Wiedenbeck, M.; Haser, S.; Hlawacek, G.

2016-12-01

The Post-Gondwana geology of South Africa is marked by two prominent planation surfaces, the result of two distinct phases of uplift and erosion. The first of these took place during the mid- to late Cretaceous (the so-called "African planation"), whilst the second is tentatively placed into the Miocene or Oligocene (the "Post-African I planation"). Humid and warm climatic conditions are recorded by deep lateritic weathering columns of suitable lithologies. The present study tests the suitability of U-Th-Pb dating on supergene monazite as a geochronometer for landscape formation and the downward progression of the chemical weathering process. We investigated material from the Zandkopsdrift carbonatite, Namaqualand, South Africa, a pipe-shaped intrusion located in the Northern Cape Province of South Africa. The age of carbonatite intrusion has been determined to be Eocene (54-56 Ma). This carbonatite has a well-developed lateritic cap that is more than 80 m thick in places and that is highly enriched in REE's hosted mostly by very fine crystalline monazite of presumably supergene origin. Due to the fact that the age of intrusion postdates the African planation surface, the lateritic cap almost certainly marks the Post-African I erosion surface. Both the onset and duration of the Post-African I cycle of erosion remain uncertain. This study addresses the duration of the Post-African I event through the dating of supergene monazite from the Zandkopsdrift laterite cap. A detailed description of the petrographic and mineralogical properties has identified the most promising samples for dating using secondary ion mass spectrometry (SIMS). A detailed description of the internal structure, microporosity and inclusions as well as intergrowths and pseudomorphic mineral formations has helped greatly toward understand the origins of the Zandkopsdrift sequence and the genesis of the REE within this profile. These data establish important anchor points for the reconstruction of

Conservation of extrusion as an exit mechanism for Chlamydia.

PubMed

Zuck, Meghan; Sherrid, Ashley; Suchland, Robert; Ellis, Tisha; Hybiske, Kevin

2016-10-01

Chlamydiae exit via membrane-encased extrusion or through lysis of the host cell. Extrusions are novel, pathogen-containing structures that confer infectious advantages to Chlamydia, and are hypothesized to promote cell-to-cell spread, dissemination to distant tissues and facilitate immune evasion. The extrusion phenomenon has been characterized for several Chlamydia trachomatis serovars, but a thorough investigation of extrusion for additional clinically relevant C. trachomatis strains and Chlamydia species has yet to be performed. The key parameters investigated in this study were: (i) the conservation of extrusion across the Chlamydia genus, (ii) the functional requirement for candidate Chlamydia genes in extrusion formation i.e. IncA and CT228 and (iii) extrusion-mediated uptake, and consequent survival of Chlamydia inside macrophages. Inclusion morphology was characterized by live fluorescence microscopy, using an inverted GFP strategy, at early and mid-stages of infection. Enriched extrusions were used to infect bone marrow-derived macrophages, and bacterial viability was measured following macrophage engulfment. Our results demonstrate that extrusion is highly conserved across chlamydiae, including ocular, STD and LGV biovars and divergent Chlamydia species. Consequently, this exit mechanism for Chlamydia may fulfill common advantages important for pathogenesis. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Carbonatitic metasomatism in orogenic dunites from Lijiatun in the Sulu UHP terrane, eastern China

NASA Astrophysics Data System (ADS)

Su, Bin; Chen, Yi; Guo, Shun; Chu, Zhu-Yin; Liu, Jing-Bo; Gao, Yi-Jie

2016-10-01

Among orogenic peridotites, dunites suffer the weakest crustal metasomatism at the slab-mantle interface and are the best lithology to trace the origins of orogenic peridotites and their initial geodynamic processes. Petrological and geochemical investigations of the Lijiatun dunites from the Sulu ultrahigh-pressure (UHP) terrane indicate a complex petrogenetic history involving melt extraction and multistage metasomatism (carbonatitic melt and slab-derived fluid). The Lijiatun dunites consist mainly of olivine (Fo = 92.0-92.6, Ca = 42-115 ppm), porphyroblastic orthopyroxene (En = 91.8-92.8), Cr-spinel (Cr# = 50.4-73.0, TiO2 < 0.2 wt.%) and serpentine. They are characterized by refractory bulk-rock compositions with high MgO (45.31-47.07 wt.%) and Mg# (91.5-91.9), and low Al2O3 (0.48-0.70 wt.%), CaO (0.25-0.44 wt.%) and TiO2 (< 0.03 wt.%) contents. Whole-rock platinum group elements (PGE) are similar to those of cratonic mantle peridotites and Re-Os isotopic data suggest that dunites formed in the early Proterozoic ( 2.2 Ga). These data indicate that the Lijiatun dunites were the residues of 30% partial melting and were derived from the subcontinental lithospheric mantle (SCLM) beneath the North China craton (NCC). Subsequent carbonatitic metasomatism is characterized by the formation of olivine-rich (Fo = 91.6-92.6, Ca = 233-311 ppm), clinopyroxene-bearing (Mg# = 95.9-96.7, Ti/Eu = 104-838) veins cutting orthopyroxene porphyroblasts. Based on the occurrence of dolomite, mass-balance calculation and thermodynamic modeling, carbonatitic metasomatism had occurred within the shallow SCLM (low-P and high-T conditions) before dunites were incorporated into the continental subduction channel. These dunites then suffered weak metasomatism by slab-derived fluids, forming pargasitic amphibole after pyroxene. This work indicates that modification of the SCLM beneath the eastern margin of the NCC had already taken place before the Triassic continental subduction. Orogenic

Means of determining extrusion temperatures

DOEpatents

McDonald, Robert E.; Canonico, Domenic A.

1977-01-01

In an extrusion process comprising the steps of fabricating a metal billet, heating said billet for a predetermined time and at a selected temperature to increase its plasticity and then forcing said heated billet through a small orifice to produce a desired extruded object, the improvement comprising the steps of randomly inserting a plurality of small metallic thermal tabs at different cross sectional depths in said billet as a part of said fabricating step, and examining said extruded object at each thermal tab location for determining the crystal structure at each extruded thermal tab thus revealing the maximum temperature reached during extrusion in each respective tab location section of the extruded object, whereby the thermal profile of said extruded object during extrusion may be determined.

Approach of automatic 3D geological mapping: the case of the Kovdor phoscorite-carbonatite complex, NW Russia.

PubMed

Kalashnikov, A O; Ivanyuk, G Yu; Mikhailova, J A; Sokharev, V A

2017-07-31

We have developed an approach for automatic 3D geological mapping based on conversion of chemical composition of rocks to mineral composition by logical computation. It allows to calculate mineral composition based on bulk rock chemistry, interpolate the mineral composition in the same way as chemical composition, and, finally, build a 3D geological model. The approach was developed for the Kovdor phoscorite-carbonatite complex containing the Kovdor baddeleyite-apatite-magnetite deposit. We used 4 bulk rock chemistry analyses - Fe magn , P 2 O 5 , CO 2 and SiO 2 . We used four techniques for prediction of rock types - calculation of normative mineral compositions (norms), multiple regression, artificial neural network and developed by logical evaluation. The two latter became the best. As a result, we distinguished 14 types of phoscorites (forsterite-apatite-magnetite-carbonate rock), carbonatite and host rocks. The results show good convergence with our petrographical studies of the deposit, and recent manually built maps. The proposed approach can be used as a tool of a deposit genesis reconstruction and preliminary geometallurgical modelling.

Carbonatite and silicate melt metasomatism of the mantle surrounding the Hawaiian plume: Evidence from volatiles, trace elements, and radiogenic isotopes in rejuvenated-stage lavas from Niihau, Hawaii

NASA Astrophysics Data System (ADS)

Dixon, Jacqueline; Clague, David A.; Cousens, Brian; Monsalve, Maria Luisa; Uhl, Jessika

2008-09-01

We present new volatile, trace element, and radiogenic isotopic compositions for rejuvenated-stage lavas erupted on Niihau and its submarine northwest flank. Niihau rejuvenated-stage Kiekie Basalt lavas are mildly alkalic and are isotopically similar to, though shifted to higher 87Sr/86Sr and lower 206Pb/204Pb than, rejuvenated-stage lavas erupted on other islands and marginal seafloor settings. Kiekie lavas display trace element heterogeneity greater than that of other rejuvenated-stage lavas, with enrichments in Ba, Sr, and light-rare earth elements resulting in high and highly variable Ba/Th and Sr/Ce. The high Ba/Th lavas are among the least silica-undersaturated of the rejuvenated-stage suite, implying that the greatest enrichments are associated with the largest extents of melting. Kiekie lavas also have high and variable H2O/Ce and Cl/La, up to 620 and 39, respectively. We model the trace element concentrations of most rejuvenated-stage lavas by small degrees (˜1% to 9%) of melting of depleted peridotite recently metasomatized by a few percent of an enriched incipient melt (0.5% melting) of the Hawaiian plume. Kiekie lavas are best explained by 4% to 13% partial melting of a peridotite source metasomatized by up to 0.2% carbonatite, similar in composition to oceanic carbonatites from the Canary and Cape Verde Islands, with lower proportion of incipient melt than that for other rejuvenated-stage lavas. Primary H2O and Cl of the carbonatite component must be high, but variability in the volatile data may be caused by heterogeneity in the carbonatite composition and/or interaction with seawater. Our model is consistent with predictions based on carbonated eclogite and peridotite melting experiments in which (1) carbonated eclogite and peridotite within the Hawaiian plume are the first to melt during plume ascent; (2) carbonatite melt metasomatizes plume and surrounding depleted peridotite; (3) as the plume rises, silica-undersaturated silicate melts are also

LINER FOR EXTRUSION BILLET CONTAINERS

DTIC Science & Technology

Shrink-fit assembly device for buildup of ceramic-coated liner and sleeve assemblies was tested and modified to develop desired temperatures and...preliminary evaluation of suitability for extrusion liner use. Procedures were developed for welding short, hollow ceramic cylinders of high-strength metal...carbides and borides to form a ceramic extrusion liner of suitable length. Disassembly tooling for rapid separation of shrink-fitted sleeves from a worn

Evaluation of Airborne Visible/Infrared Imaging Spectrometer Data of the Mountain Pass, California carbonatite complex

NASA Technical Reports Server (NTRS)

Crowley, James; Rowan, Lawrence; Podwysocki, Melvin; Meyer, David

1988-01-01

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data of the Mountain Pass, California carbonatite complex were examined to evaluate the AVIRIS instrument performance and to explore alternative methods of data calibration. Although signal-to-noise estimates derived from the data indicated that the A, B, and C spectrometers generally met the original instrument design objectives, the S/N performance of the D spectrometer was below expectations. Signal-to-noise values of 20 to 1 or lower were typical of the D spectrometer and several detectors in the D spectrometer array were shown to have poor electronic stability. The AVIRIS data also exhibited periodic noise, and were occasionally subject to abrupt dark current offsets. Despite these limitations, a number of mineral absorption bands, including CO3, Al-OH, and unusual rare earth element bands, were observed for mine areas near the main carbonatite body. To discern these bands, two different calibration procedures were applied to remove atmospheric and solar components from the remote sensing data. The two procedures, referred to as the single spectrum and the flat field calibration methods gave distinctly different results. In principle, the single spectrum method should be more accurate; however, additional fieldwork is needed to rigorously determine the degree of calibration success.

Ca-Rich Carbonate Melts: A Regular-Solution Model, with Applications to Carbonatite Magma + Vapor Equilibria and Carbonate Lavas on Venus

NASA Technical Reports Server (NTRS)

Treiman, Allan H.

1995-01-01

A thermochemical model of the activities of species in carbonate-rich melts would be useful in quantifying chemical equilibria between carbonatite magmas and vapors and in extrapolating liquidus equilibria to unexplored PTX. A regular-solution model of Ca-rich carbonate melts is developed here, using the fact that they are ionic liquids, and can be treated (to a first approximation) as interpenetrating regular solutions of cations and of anions. Thermochemical data on systems of alkali metal cations with carbonate and other anions are drawn from the literature; data on systems with alkaline earth (and other) cations and carbonate (and other) anions are derived here from liquidus phase equilibria. The model is validated in that all available data (at 1 kbar) are consistent with single values for the melting temperature and heat of fusion for calcite, and all liquidi are consistent with the liquids acting as regular solutions. At 1 kbar, the metastable congruent melting temperature of calcite (CaCO3) is inferred to be 1596 K, with (Delta)bar-H(sub fus)(calcite) = 31.5 +/- 1 kJ/mol. Regular solution interaction parameters (W) for Ca(2+) and alkali metal cations are in the range -3 to -12 kJ/sq mol; W for Ca(2+)-Ba(2+) is approximately -11 kJ/sq mol; W for Ca(2+)-Mg(2+) is approximately -40 kJ/sq mol, and W for Ca(2+)-La(3+) is approximately +85 kJ/sq mol. Solutions of carbonate and most anions (including OH(-), F(-), and SO4(2-)) are nearly ideal, with W between 0(ideal) and -2.5 kJ/sq mol. The interaction of carbonate and phosphate ions is strongly nonideal, which is consistent with the suggestion of carbonate-phosphate liquid immiscibility. Interaction of carbonate and sulfide ions is also nonideal and suggestive of carbonate-sulfide liquid immiscibility. Solution of H2O, for all but the most H2O-rich compositions, can be modeled as a disproportionation to hydronium (H3O(+)) and hydroxyl (OH(-)) ions with W for Ca(2+)-H3O(+) (approximately) equals 33 kJ/sq mol. The

Carbonatitic liquids and COH fluids from epidote-dolomite eclogites at 3.7 - 4.6 GPa: new perspectives on carbon transfer at subduction zones

NASA Astrophysics Data System (ADS)

Poli, S.

2013-12-01

Current knowledge on the solidus temperature for carbonate-bearing rocks suggests that carbonatitic liquids should not form in a subducted oceanic lithosphere, unless anomalous thermal relaxation occurs. For a mildly warm subduction path, COH-bearing basaltic eclogites are expected to loose all H2O component at epidote breakdown, located at approx. 2.8-3.0 GPa. Above this pressure limit, the solidus is that of a carbonated basaltic eclogite which shows a minimum temperature of 1020 °C at 4.0-4.5 GPa (Dasgupta et al. 2004). However, the oceanic crust includes a range of gabbroic rocks, altered on rifts and transforms, with large amounts of An-rich plagioclase. It has been shown that epidote disappearance with pressure depend on the normative anorthite content of the bulk composition considered (Poli et al. 2009); we therefore expect that altered gabbros might display a much wider pressure range where epidote persists, potentially affecting the solidus relationships. Notably, this applies to epidosite rocks formed in hydrothermal environments at oceanic settings, then recovered in high-pressure and ultra-high pressure terrains. New experimental data from 3.7 to 4.6 GPa, 750°C to 1000 °C are intended to unravel the effect of variable bulk and volatile compositions in model eclogites, enriched in the normative anorthite component (An37 and An45). Experiments are performed in piston cylinder and multianvil machines apparatus, using both single and, buffered, double capsule techniques. Garnet, clinopyroxene and coesite form in all syntheses. Lawsonite was found to persist at 3.7 GPa, 750 °C, with both dolomite and magnesite; at 3.8 GPa, 775-800 °C, fluid saturated conditions, epidote coexists with kyanite, dolomite and magnesite. The anhydrous assemblage garnet, omphacite, aragonite, kyanite is found at 4.2 GPa, 850 °C. At 900 °C, fluid-rich conditions, a silicate fluid/melt of granitoid composition, a carbonatitic melt and Na-carbonate are observed. Close to

Topological defects in epithelia govern cell death and extrusion

NASA Astrophysics Data System (ADS)

Saw, Thuan Beng; Doostmohammadi, Amin; Nier, Vincent; Kocgozlu, Leyla; Thampi, Sumesh; Toyama, Yusuke; Marcq, Philippe; Lim, Chwee Teck; Yeomans, Julia M.; Ladoux, Benoit

2017-04-01

Epithelial tissues (epithelia) remove excess cells through extrusion, preventing the accumulation of unnecessary or pathological cells. The extrusion process can be triggered by apoptotic signalling, oncogenic transformation and overcrowding of cells. Despite the important linkage of cell extrusion to developmental, homeostatic and pathological processes such as cancer metastasis, its underlying mechanism and connections to the intrinsic mechanics of the epithelium are largely unexplored. We approach this problem by modelling the epithelium as an active nematic liquid crystal (that has a long range directional order), and comparing numerical simulations to strain rate and stress measurements within monolayers of MDCK (Madin Darby canine kidney) cells. Here we show that apoptotic cell extrusion is provoked by singularities in cell alignments in the form of comet-shaped topological defects. We find a universal correlation between extrusion sites and positions of nematic defects in the cell orientation field in different epithelium types. The results confirm the active nematic nature of epithelia, and demonstrate that defect-induced isotropic stresses are the primary precursors of mechanotransductive responses in cells, including YAP (Yes-associated protein) transcription factor activity, caspase-3-mediated cell death, and extrusions. Importantly, the defect-driven extrusion mechanism depends on intercellular junctions, because the weakening of cell-cell interactions in an α-catenin knockdown monolayer reduces the defect size and increases both the number of defects and extrusion rates, as is also predicted by our model. We further demonstrate the ability to control extrusion hotspots by geometrically inducing defects through microcontact printing of patterned monolayers. On the basis of these results, we propose a mechanism for apoptotic cell extrusion: spontaneously formed topological defects in epithelia govern cell fate. This will be important in predicting

Predictors of degenerative medial meniscus extrusion: radial component and knee osteoarthritis.

PubMed

Lee, Dae-Hee; Lee, Bum-Sik; Kim, Jong-Min; Yang, Kyung-Sook; Cha, Eun-Jong; Park, Ji-Hun; Bin, Seong-Il

2011-02-01

the purpose of this study was to determine the effect of a radial tear on degenerative medial meniscus posterior horn tear extrusion and to identify predictors of medial meniscus extrusion. we reviewed the records of 102 knees with medial meniscus posterior horn tears and degeneration that underwent a partial meniscectomy. Tears were classified as root (n = 17) and non-root (n = 85) tears, or as radial (n = 46) and non-radial (n = 56) tears. Groups were compared in terms of absolute and relative meniscal extrusion, and the proportion of knees with major (> 3 mm) extrusion. Multiple regression analysis was used to identify predictors of extrusion. the radial group had greater mean absolute (4 ± 1 vs. 3 ± 1 mm, P = 0.001) and relative (31 ± 11 vs. 23 ± 12%, P = 0.031) extrusion than the non-radial group. The radial group also had a greater proportion of major extrusions than the non-radial group (74% vs. 26%; P = 0.016). In contrast, the root tear and non-root tear groups were similar in terms of mean absolute (3 ± 1 vs. 3 ± 1 mm, P = n.s.) and relative (30 ± 7 vs. 26 ± 13%; P = n.s.) extrusion and in terms of proportion with major extrusions (59 vs. 55%; P = n.s.). Extrusion was found to be associated with a similar strength with both the presence of a radial component and the preoperative Kellgren-Lawrence grade. meniscal extrusion was greater and more severe in knees with a radial tear component than in knees without a radial component. The incidence and degree of major extrusion was similar in knees with root tears and non-root tears. A radial component and knee osteoarthritis severity were similarly predictive of absolute and relative extrusion. Meniscal extrusion in osteoarthritic knees was associated not only with degenerative meniscal tear but also with osteoarthritis severity. Therefore, arthroscopic meniscal procedures, especially meniscal repair, should be cautiously considered in patients with meniscal extrusion.

Zr Extrusion – Direct Input for Models & Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cerreta, Ellen Kathleen

As we examine differences in the high strain rate, high strain tensile response of high purity, highly textured Zr as a function of loading direction, temperature and extrusion velocity with primarily post mortem characterization techniques, we have also developed a technique for characterizing the in-situ extrusion process. This particular measurement is useful for partitioning energy of the system during the extrusion process: friction, kinetic energy, and temperature

Factors Contributing to Pilot Valve Fuel Seal Extrusion in Orbiter PRCS Thrusters

NASA Technical Reports Server (NTRS)

Waller, J.M.; Saulsberry, R.L.; Albright, John D.

2000-01-01

Extrusion of the polytetrafluoroethylene (PTFE) pilot seal used in the monomethylhydrazine (fuel) valve of the Orbiter Primary Reaction Control System (PRCS) thrusters has been implicated in numerous on-orbit thruster failures and on-ground valve failures. Two extrusion mechanisms have been proposed, one or both may be occurring. The first mechanism is attributed to thermal expansion mismatch between adjacent PTFE and metal parts used in the fuel valve, and is referred to as thermal extrusion. The second mechanism is attributed to nitrogen tetroxide (oxidizer) leakage from the adjacent oxidizer valve on the same thruster during ground turnaround, and is referred to as oxidizer-induced extrusion. Model calculations of PTFE pilot seal in an exact pilot valve configuration show that extrusion can be caused by differential thermal expansion, without the intervening influence of oxidizer. Experimental data on semitrapped PTFE and TFM (modified PTFE) specimens simulating a fuel pilot valve configuration show that thermal extrusion 1) is incremental and irreversible, 2) increases with the size of the thermal excursion, 3) decreases with successive thermal cycling, and 4) is accompanied by gap formation. Both PTFE and TFM exhibit a higher affinity for oxidizer than fuel. The property changes associated with oxidizer uptake may explain why oxidizer seals do not exhibit extrusion. Impression replicas of fuel pilot seals removed from the Orbiter fleet show two types of extrusion: extrusion of the entire seal (loaded extrusion), or extrusion of non-sealing surface (unloaded extrusion). Both extrusion types may arise from differences in service history, rather than in failure mechanism. The plausibility oxidizer-induced extrusion was evaluated. Preliminary calculations suggest that enough energy, heat, or gas may be liberated under certain operational scenarios to cause catastrophic extrusion. However, given the lack of supporting data, conclusions implicating oxidizer leakage

The carbonatite-marble dykes of Abyan Province, Yemen Republic: the mixing of mantle and crustal carbonate materials revealed by isotope and trace element analysis

NASA Astrophysics Data System (ADS)

Le Bas, M. J.; Ba-Bttat, M. A. O.; Taylor, R. N.; Milton, J. A.; Windley, B. F.; Evins, P. M.

2004-09-01

Dykes of carbonate rocks, that cut gneisses in the Lowder-Mudiah area of southern Yemen, consist of dolomite and/or calcite with or without apatite, barite and monazite. Petrographic observations, mineralogical, XRF and ICP-MS analyses reveal that some of the carbonate rocks are derived from sedimentary protoliths, whereas others are magmatic calcio- and magnesio-carbonatites some of which are mineralized with barite-monazite. The interbanded occurrence and apparent contemporary emplacement of these different rock types within individual dykes, backed by Sr Nd isotope evidence, are interpreted to show that intrusion of mantle-derived carbonatite magma was accompanied by mobilization of crustal marbles. That took place some 840 Ma ago but the REE-mineralization is dated at ca. 400 Ma.

A synthesis of mineralization styles with an integrated genetic model of carbonatite-syenite-hosted REE deposits in the Cenozoic Mianning-Dechang REE metallogenic belt, the eastern Tibetan Plateau, southwestern China

NASA Astrophysics Data System (ADS)

Liu, Yan; Hou, Zengqian

2017-04-01

The Cenozoic Mianning-Dechang (MD) rare earth element (REE) belt in eastern Tibet is an important source of light REE in southwest China. The belt is 270 km long and 15 km wide. The total REE resources are >3 Mt of light rare earth oxides (REO), including 3.17 Mt of REO at Maoniuping (average grade = 2.95 wt.%), 81,556 t at Dalucao (average grade = 5.21 wt.%), 0.1 Mt at Muluozhai (average grade = 3.97 wt.%), and 5764 t of REO at Lizhuang (average grade = 2.38 wt.%). Recent results from detailed geological surveys, and studies of petrographic features, ore-forming ages, ore forming conditions, and wallrock alteration are synthesized in this paper. REE mineralization within this belt is associated with carbonatite-syenite complexes, with syenites occurring as stocks intruded by carbonatitic sills or dikes. The mineralization is present as complex vein systems that contain veinlet, stringer, stockwork, and brecciated pipe type mineralization. Carbonatites in these carbonatite-related REE deposits (CARDs) are extremely rich in light REEs, Sr (>5000 ppm), and Ba (>1000 ppm), and have low Sr/Ba and high Ba/Th ratios, and radiogenic Sr-Nd isotopic compositions. These fertile magmas, which may lead to the formation of REE deposits, were generated by the partial melting of sub-continental lithospheric mantle (SCLM) that was metasomatized by REE- and CO2-rich fluids derived from subducted marine sediments. We suggest that this refertilization occurred along cratonic margins and, in particular, at a convergent margin where small-volume carbonatitic melts ascended along trans-lithospheric faults and transported REEs into the overlying crust, leading to the formation of the CARDs. The formation of fertile carbonatites requires a thick lithosphere and/or high pressures (>25 kbar), a metasomatized and enriched mantle source, and favorable pathways for magma to ascend into the overlying crust where REE-rich fluids exsolve from cooling magma. The optimal combination of these three

Micromechanics f an Extrusion in High-Cycle Fatigue With Creep

DTIC Science & Technology

1988-01-01

amount referred to as the "static extrusion" ( Mughrabi et al , 1983). This E{a causes an initial compression ta, in R. As the extrusion grows under cyclic...Deformation of sin- gle crystals at elevated temperatures (Johnson, et al , 1953, 1955) also occurs by slip in pri- marily the same slip systems that...growth will cease after the extrusion has reached the static extrusion. Lin, et al ., 1988 have shown that the residual tensile stress ’tact caused by

Light rare earth element systematics as a tool for investigating the petrogenesis of phoscorite-carbonatite associations, as exemplified by the Phalaborwa Complex, South Africa

NASA Astrophysics Data System (ADS)

Milani, Lorenzo; Bolhar, Robert; Frei, Dirk; Harlov, Daniel E.; Samuel, Vinod O.

2017-12-01

In-situ trace element analyses of fluorapatite, calcite, dolomite, olivine, and phlogopite have been undertaken on representative phoscorite and carbonatite rocks of the Palaeoproterozoic Phalaborwa Complex. Textural and compositional characterization reveals uniformity of fluorapatite and calcite among most of the intrusions, and seems to favor a common genetic origin for the phoscorite-carbonatite association. Representing major repositories for rare earth elements (REE), fluorapatite and calcite exhibit tightly correlated light REE (LREE) abundances, suggesting that partitioning of LREE into these rock forming minerals was principally controlled by simple igneous differentiation. However, light rare earth element distribution in apatite and calcite cannot be adequately explained by equilibrium and fractional crystallization and instead favors a complex crystallization history involving mixing of compositionally distinct magma batches, in agreement with previously reported mineral isotope variability that requires open-system behaviour.

How Uganda Reversed Its HIV Epidemic

PubMed Central

Okware, Sam; Naamara, Warren; Sutherland, Don; Flanagan, Donna; Carael, Michel; Blas, Erik; Delay, Paul; Tarantola, Daniel

2006-01-01

Uganda is one of only two countries in the world that has successfully reversed the course of its HIV epidemic. There remains much controversy about how Uganda's HIV prevalence declined in the 1990s. This article describes the prevention programs and activities that were implemented in Uganda during critical years in its HIV epidemic, 1987 to 1994. Multiple resources were aggregated to fuel HV prevention campaigns at multiple levels to a far greater degree than in neighboring countries. We conclude that the reversed direction of the HIV epidemic in Uganda was the direct result of these interventions and that other countries in the developing world could similarly prevent or reverse the escalation of HIV epidemics with greater availability of HIV prevention resources, and well designed programs that take efforts to a critical breadth and depth of effort. PMID:16858635

HIGH ENERGY RATE EXTRUSION OF URANIUM

DOEpatents

Lewis, L.

1963-07-23

A method of extruding uranium at a high energy rate is described. Conditions during the extrusion are such that the temperature of the metal during extrusion reaches a point above the normal alpha to beta transition, but the metal nevertheless remains in the alpha phase in accordance with the Clausius- Clapeyron equation. Upon exiting from the die, the metal automatically enters the beta phase, after which the metal is permitted to cool. (AEC)

The presence of carbonates on Mars: origin, terrestrial analogues and analytical tecniques ambiguity

NASA Astrophysics Data System (ADS)

Marinangeli, Lucia; Liberi, Francesca; Pompilio, Loredana; Piluso, Eugenio; Rosatelli, Gianluigi; Tranquilli, Andrea; Pepe, Monica

2013-04-01

The most common cause of carbonates formation on Earth is the chemical deposition from Ca-rich waters in sedimentary basins, mostly in shallow water. The lack of widespread exposure of carbonates on the Mars' surface in areas where geomorphological and sedimentological mapping confirms the presence of water for a long period of the Martian history, led us to look for a potential different origin of the carbonates identified on CRISM data [1, 2,3]. We suggest the presence of carbonatites on Mars and we have also investigated the capabilities of analytical tecniques for mineralogical analysis to recognise these peculiar type of rocks. Carbonatites are igneous rocks containing more than 50 percent of carbonate minerals and associated silicate minerals as olivine, pyroxene and phyllosilicates. Carbonatites are associated with alkali silicate rocks that are usually of nephelinitic or melilititic affinity. The Martian carbonates are often present in layered rocks and in association with hydrated Fe-Mg silicates (clays family) and kaolinite-group minerals at places [1]. This mineralogical association is very similar to an water-altered carbonatite. We have compared the compositional and mineralogical affinity of some carbonatite samples from different alkaline-carbonatite complexes from Uganda, Spain and Italy, with the mineralogy described for the carbonate- and phyllosolicate rich rocks on Mars, using the XRD and IR analyses. The mineral assemblage has been defined through petrographic analyses as well. It is important to stress that only with XRD analysis some minerals diagnos-tic of carbonatitic assemblage (i.e. melilite) were identified. The relationships between carbonatites and their associated silicate rocks are complex and are still not fully understood on Earth as well, however, it deserves further investigations to better explain the carbonates and silicate volcanic rocks on Mars and its crustal dynamics. References: [1] Michalski and Niles, 2010, Nature

Is health care financing in Uganda equitable?

PubMed

Zikusooka, C M; Kyomuhang, R; Orem, J N; Tumwine, M

2009-10-01

Health care financing provides the resources and economic incentives for operating health systems and is a key determinant of health system performance. Equitable financing is based on: financial protection, progressive financing and cross-subsidies. This paper describes Uganda's health care financing landscape and documents the key equity issues associated with the current financing mechanisms. We extensively reviewed government documents and relevant literature and conducted key informant interviews, with the aim of assessing whether Uganda's health care financing mechanisms exhibited the key principles of fair financing. Uganda's health sector remains significantly under-funded, mainly relying on private sources of financing, especially out-of-pocket spending. At 9.6 % of total government expenditure, public spending on health is far below the Abuja target of 15% that GoU committed to. Prepayments form a small proportion of funding for Uganda's health sector. There is limited cross-subsidisation and high fragmentation within and between health financing mechanisms, mainly due to high reliance on out-of-pocket payments and limited prepayment mechanisms. Without compulsory health insurance and low coverage of private health insurance, Uganda has limited pooling of resources, and hence minimal cross-subsidisation. Although tax revenue is equitable, the remaining financing mechanisms for Uganda are inequitable due to their regressive nature, their lack of financial protection and limited cross-subsidisation. Overall, Uganda's current health financing is inequitable and fragmented. The government should take explicit action to promote equitable health care financing by establishing pre-payment schemes, enhancing cross-subsidisation mechanisms and through appropriate integration of financing mechanisms.

Experimental and numerical investigation of ram extrusion of bread dough

NASA Astrophysics Data System (ADS)

Mohammed, M. A. P.; Wanigasooriya, L.; Charalambides, M. N.

2016-10-01

An experimental and numerical study on ram extrusion of bread dough was conducted. A laboratory ram extrusion rig was designed and manufactured, where dies with different angles and exit radii were employed. Rate dependent behaviour was observed from tests conducted at different extrusion speeds, and higher extrusion pressure was reported for dies with decreasing exit radius. A finite element simulation of extrusion was performed using the adaptive meshing technique in Abaqus. Simulations using a frictionless contact between the billet and die wall showed that the model underestimates the response at high entry angles. On the other hand, when the coefficient of friction value was set to 0.09 as measured from friction experiments, the dough response was overestimated, i.e. the model extrusion pressure was much higher than the experimentally measured values. When a critical shear stress limit, τmax, was used, the accuracy of the model predictions improved. The results showed that higher die angles require higher τmax values for the model and the experiments to agree.

Uganda rainfall variability and prediction

NASA Astrophysics Data System (ADS)

Jury, Mark R.

2018-05-01

This study analyzes large-scale controls on Uganda's rainfall. Unlike past work, here, a May-October season is used because of the year-round nature of agricultural production, vegetation sensitivity to rainfall, and disease transmission. The Uganda rainfall record exhibits steady oscillations of ˜3 and 6 years over 1950-2013. Correlation maps at two-season lead time resolve the subtropical ridge over global oceans as an important feature. Multi-variate environmental predictors include Dec-May south Indian Ocean sea surface temperature, east African upper zonal wind, and South Atlantic wind streamfunction, providing a 33% fit to May-Oct rainfall time series. Composite analysis indicates that cool-phase El Niño Southern Oscillation supports increased May-Oct Uganda rainfall via a zonal overturning lower westerly/upper easterly atmospheric circulation. Sea temperature anomalies are positive in the east Atlantic and negative in the west Indian Ocean in respect of wet seasons. The northern Hadley Cell plays a role in limiting the northward march of the equatorial trough from May to October. An analysis of early season floods found that moist inflow from the west Indian Ocean converges over Uganda, generating diurnal thunderstorm clusters that drift southwestward producing high runoff.

76 FR 29007 - Certain Aluminum Extrusions From China

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-19

... Aluminum Extrusions From China Determinations On the basis of the record \\1\\ developed in the subject...), that an industry in the United States is materially injured by reason of imports of certain aluminum... by Aluminum Extrusions Fair Trade Committee and the United Steel, Paper and Forestry, Rubber...

FORMING TUBES AND RODS OF URANIUM METAL BY EXTRUSION

DOEpatents

Creutz, E.C.

1959-01-27

A method and apparatus are presented for the extrusion of uranium metal. Since uranium is very brittle if worked in the beta phase, it is desirable to extrude it in the gamma phase. However, in the gamma temperature range thc uranium will alloy with the metal of the extrusion dic, and is readily oxidized to a great degree. According to this patent, uranium extrusion in thc ganmma phase may be safely carried out by preheating a billet of uranium in an inert atmosphere to a trmperature between 780 C and 1100 C. The heated billet is then placed in an extrusion apparatus having dies which have been maintained at an elevated temperature for a sufficient length of time to produce an oxide film, and placing a copper disc between the uranium billet and the die.

Long-term dominance of Mycobacterium tuberculosis Uganda family in peri-urban Kampala-Uganda is not associated with cavitary disease.

PubMed

Wampande, Eddie M; Mupere, Ezekiel; Debanne, Sara M; Asiimwe, Benon B; Nsereko, Mary; Mayanja, Harriet; Eisenach, Kathleen; Kaplan, Gilla; Boom, Henry W; Gagneux, Sebastien; Joloba, Moses L

2013-10-17

Previous studies have shown that Mycobacterium tuberculosis (MTB) Uganda family, a sub-lineage of the MTB Lineage 4, is the main cause of tuberculosis (TB) in Uganda. Using a well characterized patient population, this study sought to determine whether there are clinical and patient characteristics associated with the success of the MTB Uganda family in Kampala. A total of 1,746 MTB clinical isolates collected from 1992-2009 in a household contact study were genotyped. Genotyping was performed using Single Nucleotide Polymorphic (SNP) markers specific for the MTB Uganda family, other Lineage 4 strains, and Lineage 3, respectively. Out of 1,746 isolates, 1,213 were from patients with detailed clinical data. These data were used to seek associations between MTB lineage/sub-lineage and patient phenotypes. Three MTB lineages were found to dominate the MTB population in Kampala during the last two decades. Overall, MTB Uganda accounted for 63% (1,092/1,746) of all cases, followed by other Lineage 4 strains accounting for 22% (394/1,746), and Lineage 3 for 11% (187/1,746) of cases, respectively. Seventy-three (4 %) strains remained unclassified. Our longitudinal data showed that MTB Uganda family occurred at the highest frequency during the whole study period, followed by other Lineage 4 strains and Lineage 3. To explore whether the long-term success of MTB Uganda family was due to increased virulence, we used cavitary disease as a proxy, as this form of TB is the most transmissible. Multivariate analysis revealed that even though cavitary disease was associated with known risk factors such as smoking (adjusted odds ratio (aOR) 4.8, 95% confidence interval (CI) 3.33-6.84) and low income (aOR 2.1, 95% CI 1.47-3.01), no association was found between MTB lineage and cavitary TB. The MTB Uganda family has been dominating in Kampala for the last 18 years, but this long-term success is not due to increased virulence as defined by cavitary disease.

Reducing the Surface Degradation of Aluminum Extrusion Dies During Preheating

NASA Astrophysics Data System (ADS)

Stratton, Paul

2010-07-01

Aluminum extrusion dies are usually made from H13 steel that is ferritically nitrocarburized to minimize wear and pick-up. Before being placed in the extrusion press, the dies are preheated to minimize thermal shock at the start of the extrusion cycle. During the preheating time, the nitrocarburized layer oxidizes. Some of this layer can break away during extrusion leaving marks on the product. Although inerting the preheat furnaces with nitrogen has been found to reduce the oxidation, it does not solve the problem completely. Experiments have shown that a small addition of ammonia to the preheating protective atmosphere could eliminate oxidation and prevent nitrogen loss from the surface nitride layer.

Calibrator device for the extrusion of cable coatings

NASA Astrophysics Data System (ADS)

Garbacz, Tomasz; Dulebová, Ľudmila; Spišák, Emil; Dulebová, Martina

2016-05-01

This paper presents selected results of theoretical and experimental research works on a new calibration device (calibrators) used to produce coatings of electric cables. The aim of this study is to present design solution calibration equipment and present a new calibration machine, which is an important element of the modernized technology extrusion lines for coating cables. As a result of the extrusion process of PVC modified with blowing agents, an extrudate in the form of an electrical cable was obtained. The conditions of the extrusion process were properly selected, which made it possible to obtain a product with solid external surface and cellular core.

Extrusion of small-diameter, thin-wall tungsten tubing

NASA Technical Reports Server (NTRS)

Blankenship, C. P.; Gyorgak, C. A.

1967-01-01

Small-diameter, thin-wall seamless tubing of tungsten has been fabricated in lengths of up to 10 feet by hot extrusion over a floating mandrel. Extrusion of 0.50-inch-diameter tubing over 0.4-inch-diameter mandrels was accomplished at temperatures ranging from 3000 degrees to 4000 degrees F.

Functionality of extrusion--texturized whey proteins.

PubMed

Onwulata, C I; Konstance, R P; Cooke, P H; Farrell, H M

2003-11-01

Whey, a byproduct of the cheesemaking process, is concentrated by processors to make whey protein concentrates (WPC) and isolates (WPI). Only 50% of whey proteins are used in foods. In order to increase their usage, texturizing WPC, WPI, and whey albumin is proposed to create ingredients with new functionality. Extrusion processing texturizes globular proteins by shearing and stretching them into aligned or entangled fibrous bundles. In this study, WPC, WPI, and whey albumin were extruded in a twin screw extruder at approximately 38% moisture content (15.2 ml/min, feed rate 25 g/min) and, at different extrusion cook temperatures, at the same temperature for the last four zones before the die (35, 50, 75, and 100 degrees C, respectively). Protein solubility, gelation, foaming, and digestibility were determined in extrudates. Degree of extrusion-induced insolubility (denaturation) or texturization, determined by lack of solubility at pH 7 for WPI, increased from 30 to 60, 85, and 95% for the four temperature conditions 35, 50, 75, and 100 degrees C, respectively. Gel strength of extruded isolates increased initially 115% (35 degrees C) and 145% (50 degrees C), but gel strength was lost at 75 and 100 degrees C. Denaturation at these melt temperatures had minimal effect on foaming and digestibility. Varying extrusion cook temperature allowed a new controlled rate of denaturation, indicating that a texturized ingredient with a predetermined functionality based on degree of denaturation can be created.

Making Ceramic/Polymer Parts By Extrusion Stereolithography

NASA Technical Reports Server (NTRS)

Stuffle, Kevin; Mulligan, A.; Creegan, P.; Boulton, J. M.; Lombardi, J. L.; Calvert, P. D.

1996-01-01

Extrusion stereolithography developmental method of computer-controlled manufacturing of objects out of ceramic/polymer composite materials. Computer-aided design/computer-aided manufacturing (CAD/CAM) software used to create image of desired part and translate image into motion commands for combination of mechanisms moving resin dispenser. Extrusion performed in coordination with motion of dispenser so buildup of extruded material takes on size and shape of desired part. Part thermally cured after deposition.

75 FR 34482 - Certain Aluminum Extrusions From China

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-17

...)] Certain Aluminum Extrusions From China Determinations On the basis of the record \\1\\ developed in the... reason of imports from China of certain aluminum extrusions, provided for in subheadings 7604.21, 7604.29... United States at less than fair value (LTFV) and subsidized by the Government of China. \\1\\ The record is...

Between carbonatite and lamproite—Diamondiferous Torngat ultramafic lamprophyres formed by carbonate-fluxed melting of cratonic MARID-type metasomes

NASA Astrophysics Data System (ADS)

Tappe, Sebastian; Foley, Stephen F.; Kjarsgaard, Bruce A.; Romer, Rolf L.; Heaman, Larry M.; Stracke, Andreas; Jenner, George A.

2008-07-01

New U-Pb perovskite ages reveal that diamondiferous ultramafic lamprophyre magmas erupted through the Archean crust of northern Labrador and Quebec (eastern Canada) between ca. 610 and 565 Ma, a period of strong rifting activity throughout contiguous Laurentia and Baltica. The observed Torngat carbonate-rich aillikite/carbonatite and carbonate-poor mela-aillikite dyke varieties show a large spread in Sr-Nd-Hf-Pb isotope ratios with pronounced correlations between isotope systems. An isotopically depleted component is identified solely within aillikites ( 87Sr/ 86Sr i = 0.70323-0.70377; ɛNd i = +1.2-+1.8; ɛHf i = +1.4-+3.5; 206Pb/ 204Pb i = 18.2-18.5), whereas some aillikites and all mela-aillikites range to more enriched isotope signatures ( 87Sr/ 86Sr i = 0.70388-0.70523; ɛNd i = -0.5 to -3.9; ɛHf i = -0.6 to -6.0; 206Pb/ 204Pb i = 17.8-18.2). These contrasting isotopic characteristics of aillikites/carbonatites and mela-aillikites, along with subtle differences in their modal carbonate, SiO 2, Al 2O 3, Na 2O, Cs-Rb, and Zr-Hf contents, are consistent with two distinctive metasomatic assemblages of different age in the mantle magma source region. Integration of petrologic, geochemical, and isotopic information leads us to propose that the isotopically enriched component originated from a reduced phlogopite-richterite-Ti-oxide dominated source assemblage that is reminiscent of MARID suite xenoliths. In contrast, the isotopically depleted component was derived from a more oxidized phlogopite-carbonate dominated source assemblage. We argue that low-degree CO 2-rich potassic silicate melts from the convective upper mantle were preferentially channelled into an older, pre-existing MARID-type vein network at the base of the North Atlantic craton lithosphere, where they froze to form new phlogopite-carbonate dominated veins. Continued stretching and thinning of the cratonic lithosphere during the Late Neoproterozoic remobilized the carbonate-rich vein material and

Hot-melt co-extrusion: requirements, challenges and opportunities for pharmaceutical applications.

PubMed

Vynckier, An-Katrien; Dierickx, Lien; Voorspoels, Jody; Gonnissen, Yves; Remon, Jean Paul; Vervaet, Chris

2014-02-01

Co-extrusion implies the simultaneous hot-melt extrusion of two or more materials through the same die, creating a multi-layered extrudate. It is an innovative continuous production technology that offers numerous advantages over traditional pharmaceutical processing techniques. This review provides an overview of the co-extrusion equipment, material requirements and medical and pharmaceutical applications. The co-extrusion equipment needed for pharmaceutical production has been summarized. Because the geometrical design of the die dictates the shape of the final product, different die types have been discussed. As one of the major challenges at the moment is shaping the final product in a continuous way, an overview of downstream solutions for processing co-extrudates into drug products is provided. Layer adhesion, extrusion temperature and viscosity matching are pointed out as most important requirements for material selection. Examples of medical and pharmaceutical applications are presented and some recent findings considering the production of oral drug delivery systems have been summarized. Co-extrusion provides great potential for the continuous production of fixed-dose combination products which are gaining importance in pharmaceutical industry. There are still some barriers to the implementation of co-extrusion in the pharmaceutical industry. The optimization of downstream processing remains a point of attention. © 2013 Royal Pharmaceutical Society.

Structural centrosome aberrations sensitize polarized epithelia to basal cell extrusion.

PubMed

Ganier, Olivier; Schnerch, Dominik; Nigg, Erich A

2018-06-01

Centrosome aberrations disrupt tissue architecture and may confer invasive properties to cancer cells. Here we show that structural centrosome aberrations, induced by overexpression of either Ninein-like protein (NLP) or CEP131/AZI1, sensitize polarized mammalian epithelia to basal cell extrusion. While unperturbed epithelia typically dispose of damaged cells through apical dissemination into luminal cavities, certain oncogenic mutations cause a switch in directionality towards basal cell extrusion, raising the potential for metastatic cell dissemination. Here we report that NLP-induced centrosome aberrations trigger the preferential extrusion of damaged cells towards the basal surface of epithelial monolayers. This switch in directionality from apical to basal dissemination coincides with a profound reorganization of the microtubule cytoskeleton, which in turn prevents the contractile ring repositioning that is required to support extrusion towards the apical surface. While the basal extrusion of cells harbouring NLP-induced centrosome aberrations requires exogenously induced cell damage, structural centrosome aberrations induced by excess CEP131 trigger the spontaneous dissemination of dying cells towards the basal surface from MDCK cysts. Thus, similar to oncogenic mutations, structural centrosome aberrations can favour basal extrusion of damaged cells from polarized epithelia. Assuming that additional mutations may promote cell survival, this process could sensitize epithelia to disseminate potentially metastatic cells. © 2018 The Authors.

Metal flow and temperature in direct extrusion of large-size aluminum billets

NASA Astrophysics Data System (ADS)

Valberg, Henry; Costa, André L. M.

2018-05-01

FEM-analysis is used to study thermo-mechanical conditions in aluminum rod extrusion for billets with large size corresponding to that used in industrial production. In the analysis, focus is on how the metal flow and the temperature conditions in the extrusion material is affected by the extrusion velocity in terms of the ram speed used in the extrusion process. In the study, metal flow is characterized by the deformations in extrusion subjected to a perfect grid pattern, consisting of orthogonal crossing lines, added into the longitudinal mid-plane of the initial billet. The analysis shows that metal flow in extrusion conducted at a low ram speed of 1 mms-1, is predicted significantly different from that at a high speed of 5 mms-1, or above. As regards the thermal conditions in the extrusion material, they are also predicted significantly different, at the low and the high ram speed level. A likely explanation why metal flow is different at low and high ram speeds may be that flow is altered because of the concurrent change in the temperature field within the billet.

Comparison of apical and coronal extrusions using reciprocating and rotary instrumentation systems.

PubMed

Lu, Yan; Chen, Min; Qiao, Feng; Wu, Ligeng

2015-08-07

The aim of this study was to compare the apical and coronal extrusions by using two reciprocating and two rotary instrumentation systems. Eighty extracted human single-rooted anterior teeth were randomly assigned to four groups. Four different root canal instrumentation systems were used according to the manufacturers instructions, including two reciprocating single-file systems, Reciproc and WaveOne, and two full-sequence rotary BLX and ProTaper instruments. Debris collected from the coronal by the instruments and apical extrusions were quantified respectively. After drying the collections, the mean weight of debris collected from apical and coronal extrusions was assessed using an electronic balance and analyzed using the Kruskal-Wallis H and Mann-Whitney U tests. Statistically significant differences in the apical extrusion were observed among the four groups. Reciproc and WaveOne instruments produced significantly less debris than BLX and ProTaper instruments (P < 0.05). All of the systems produced apical extrusion of debris. However, reciprocating single-file systems produced less apical extrusion than full-sequence rotary systems. No relationship was observed between apical and coronal extrusions.

Advantages of conducting in-situ U-Pb age dating of multiple U-bearing minerals from a single complex: Case in point - the Oka Carbonatite Complex

NASA Astrophysics Data System (ADS)

Chen, W.; Simonetti, A.

2012-12-01

A detailed radiometric investigation is currently underway focusing on U-bearing accessory minerals apatite, perovskite, and niocalite from the Oka Carbonatite Complex (Canada). One of the main objectives is to obtain a comparative chronology of melt crystallization for the complex. Unlike other commonly adopted U-bearing minerals (e.g., zircon, monazite) for in-situ dating investigations, apatite, perovskite, and niocalite contain relatively high contents of common Pb. Hence, careful assessment of the proportion and composition of the common Pb, and usage of appropriate matrix-matched external standards are imperative. The Madagascar apatite was utilized as the external standard for apatite dating, and the Emerald Lake and Durango apatites were adopted as secondary standards; the latter yield ages of 92.6 ±1.8 and 32.2 ±1.1 Ma, respectively, and these are identical to their accepted ages. Pb/U ages for apatite from Oka were obtained for different rock types, including 8 carbonatites, 4 okaites, 3 ijolites and 3 alnoites, and these define a range of ages between ~105 and ~135 Ma; this result suggests a protracted crystallization history. In total, 266 individual analyses define two peaks at ~115 and ~125Ma. For perovskite dating, the Ice River perovskite standard was utilized as the external standard. The perovskites from one okaite sample yield an age of 112.2 ±1.9 Ma, and is much younger than the previously reported U-Pb perovskite age of 131 ±7 Ma. Hence, the combined U-Pb perovskite ages also suggest a rather prolonged time of melt crystallization. Niocalite is a rare, accessory silicate mineral that occurs within the carbonatites at Oka. The international zircon standard BR266 was selected for use as the external standard and rastering was employed to minimize the Pb-U fractionation. Two niocalite samples give young ages at 110.6 ±1.2 and 115.0 ±1.9 Ma, and are identical to their respective apatite ages (given associated uncertainties) from the same

Historical review of die drool phenomenon during plastics extrusion

NASA Astrophysics Data System (ADS)

Musil, Jan; Zatloukal, Martin

2013-04-01

Die drool phenomenon is defined as unwanted spontaneous accumulation of extruded polymer melt on open faces of extrusion die during extrusion process. Such accumulated material builds up on the die exit and frequently or continually sticks onto the extruded product and thus damages it. Since die drool appears, extrusion process must be shut down and die exit must be manually cleaned which is time and money consuming. Although die drool is complex phenomenon and its formation mechanism is not fully understood yet, variety of proposed explanations of its formation mechanism and also many ways to its elimination can be found in open literature. Our review presents in historical order breakthrough works in the field of die drool research, shows many ways to suppress it, introduces methods for its quantitative evaluation and composition analysis and summarizes theories of die drool formation mechanism which can be helpful for extrusion experts.

Role of E-cadherin in membrane-cortex interaction probed by nanotube extrusion.

PubMed

Tabdanov, Erdem; Borghi, Nicolas; Brochard-Wyart, Françoise; Dufour, Sylvie; Thiery, Jean-Paul

2009-03-18

This study aims to define the role of E-cadherin (Ecad) engagement in cell-cell contact during membrane-cortex interaction. As a tool, we used a hydrodynamic membrane tube extrusion technique to characterize the mechanical interaction between the plasma membrane and the underlying cortical cytoskeleton. Cells were anchored on 4.5 microm beads coated with polylysine (PL) to obtain nonspecific cell adhesion or with an antibody against Ecad to mimic specific Ecad-mediated cell adhesion. We investigated tube length dynamics L(t) over time and through successive extrusions applied to the cell at regular time intervals. A constant slow velocity was observed for the first extrusion, for PL-attached cells. Subsequent extrusions had two phases: an initial high-velocity regime followed by a low-velocity regime. Successive extrusions gradually weakened the binding of the membrane around the tube neck to the underlying cortical cytoskeleton. Cells specifically attached via Ecad first exhibited a very low extrusion velocity regime followed by a faster extrusion regime similar to nonspecific extrusion. This indicates that Ecad strengthens the membrane-cortical cytoskeleton interaction, but only in a restricted area corresponding to the site of contact between the cell and the bead. Occasional giant "cortex" tubes were extruded with specifically anchored cells, demonstrating that the cortex remained tightly bound to the membrane through Ecad-mediated adhesion at the contact site.

Role of E-Cadherin in Membrane-Cortex Interaction Probed by Nanotube Extrusion

PubMed Central

Tabdanov, Erdem; Borghi, Nicolas; Brochard-Wyart, Françoise; Dufour, Sylvie; Thiery, Jean-Paul

2009-01-01

This study aims to define the role of E-cadherin (Ecad) engagement in cell-cell contact during membrane-cortex interaction. As a tool, we used a hydrodynamic membrane tube extrusion technique to characterize the mechanical interaction between the plasma membrane and the underlying cortical cytoskeleton. Cells were anchored on 4.5 μm beads coated with polylysine (PL) to obtain nonspecific cell adhesion or with an antibody against Ecad to mimic specific Ecad-mediated cell adhesion. We investigated tube length dynamics L(t) over time and through successive extrusions applied to the cell at regular time intervals. A constant slow velocity was observed for the first extrusion, for PL-attached cells. Subsequent extrusions had two phases: an initial high-velocity regime followed by a low-velocity regime. Successive extrusions gradually weakened the binding of the membrane around the tube neck to the underlying cortical cytoskeleton. Cells specifically attached via Ecad first exhibited a very low extrusion velocity regime followed by a faster extrusion regime similar to nonspecific extrusion. This indicates that Ecad strengthens the membrane-cortical cytoskeleton interaction, but only in a restricted area corresponding to the site of contact between the cell and the bead. Occasional giant “cortex” tubes were extruded with specifically anchored cells, demonstrating that the cortex remained tightly bound to the membrane through Ecad-mediated adhesion at the contact site. PMID:19289070

Intraplate 'typical' and Ca-rich igneous rocks associated with carbonatites in Baluchistan, Middle East

NASA Astrophysics Data System (ADS)

Romanko, Alexander

2010-05-01

Islamic republic of Iran We present some interesting materials on a poorly studied Neogene-(Quaternary) igneous rocks of Baluchistan and Sistan province, east Iran. They were received by a group led by a regional specialists E. Romanko, A. Hushmanzadeh and M.A.A. Nogol Sadat. Some important features on the rock studied are as follows: mainly K-Na subalkaline rock affinity (also alkaline one too) with a middle K), not very High-Ti, not high, deep 87Sr/86Sr (ISr) = 0.7039 +/- 2 (trachyandesite) and 0.7049 +/- 3 (trachybasalt, both data by GIN RAS, Russia) alongside the 0.7049 on a vulcanite (Camp & Griffis, 1982), LREE-enrichment with a high LREE/HREE (La - more than 32 ppm), and a characteristical Eu/Eu* more than 1.1; up to high - 1/3 of CaO and up to a high - 0.45% of Sr in basic trachyandesites (meaning the real carbonatites ca 200 km to the east, Hanneshin, Afghanistan), complex correlation of some characteristical elements; then-High-Ti (rhutile, Ti-hornblende) and High-Ca phases (clinocoizite, also, Ca- rich ceolie - vayrakite is proposed), replacement of primary minerals due to a fairly strong rock-fluid interaction. North-East tectonic-magmatic +/- metallogenic (economic regional Cu-Au +/- Pb, Zn, poor Ag, PGE, As, Hg, Bi etc. - e.x., Anarak deposits (E.Romanko, 1984) ) zonation, related to the famous subduction of Arabian plate, exists, e.x. (calc-alkaline /1/ - intraplate /2/ ): 1: Eocene shoshonites - Paleocene-Oligocene calc-alkaline intrusives - Miocene-Recent calc-alkaline volcanic (-plutonic) rocks and 2: Paleogene? (Lut block)-Neogene subalkaline rocks - Quaternary Afghanistan carbonatites etc. Alpine compression on the moderate subductional depths up to 200 km (Trubitsin et al., 2004) in the Central Iran, at least, partly compensated, as proposed, by contemporaneous/ younger Pg?-N-Q extensional intraplate magmatism of the East Iran/ Afghanistan and nearby area.

Basics of Compounding: Hot Melt Extrusion.

PubMed

DePasquale, Seth

2017-01-01

Hot Melt Extrusion, a production process that has been around for quite some time, has the ability to produce innovative compounds not previously achievable with conventional methods. However, many variables need to be considered prior to production. The use of small-scale extruders and 3D printers provides compounders a pathway for developing new dosage forms at a minimal cost while initial research is being completed. This article discusses the uses of Hot Melt Extrusion, the equipment used, the current and future applications, and the challenges with the technology. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Extrusion cast explosive

DOEpatents

Scribner, Kenneth J.

1985-01-01

Improved, multiphase, high performance, high energy, extrusion cast explosive compositions, comprising, a crystalline explosive material; an energetic liquid plasticizer; a urethane prepolymer, comprising a blend of polyvinyl formal, and polycaprolactone; a polyfunctional isocyanate; and a catalyst are disclosed. These new explosive compositions exhibit higher explosive content, a smooth detonation front, excellent stability over long periods of storage, and lower sensitivity to mechanical stimulants.

Experimental and Numerical Study on the Strength of Aluminum Extrusion Welding.

PubMed

Bingöl, Sedat; Bozacı, Atilla

2015-07-17

The quality of extrusion welding in the extruded hollow shapes is influenced significantly by the pressure and effective stress under which the material is being joined inside the welding chamber. However, extrusion welding was not accounted for in the past by the developers of finite element software packages. In this study, the strength of hollow extrusion profile with seam weld produced at different ram speeds was investigated experimentally and numerically. The experiments were performed on an extruded hollow aluminum profile which was suitable to obtain the tensile tests specimens from its seam weld's region at both parallel to extrusion direction and perpendicular to extrusion direction. A new numerical modeling approach, which was recently proposed in literature, was used for numerical analyses of the study. The simulation results performed at different ram speeds were compared with the experimental results, and a good agreement was obtained.

Gender and Age-Appropriate Enrolment in Uganda

ERIC Educational Resources Information Center

Wells, Ryan

2009-01-01

Secondary school enrolment in Uganda has historically favoured males over females. Recently, however, researchers have reported that the secondary enrolment gender gap has significantly diminished, and perhaps even disappeared in Uganda. Even if gender parity is being achieved for enrolment broadly, there may be a gender gap concerning…

Magnetic resonance imaging evidence of meniscal extrusion in medial meniscus posterior root tear.

PubMed

Choi, Chul-Jun; Choi, Yun-Jin; Lee, Jae-Jeong; Choi, Chong-Hyuk

2010-12-01

The purpose of this study was to evaluate the relation between meniscal extrusion on magnetic resonance imaging (MRI) and tearing of the posterior root of the medial meniscus, as well as to understand the relation between meniscal extrusion and chondral lesions. From January 2007 to December 2008, 387 consecutive cases of medial meniscal tears were treated arthroscopically. Of these cases, 248 (64.1%) with MRI were reviewed. Arthroscopic findings were reviewed for the type of tear and medial compartment cartilage lesion. Root tear was defined as a radial tear in the posterior horn of the medial meniscus near the tibial spine (i.e., within 5 mm of the root attachment). An MRI scan of the knee was used to evaluate the presence and extent of meniscal extrusion. Meniscal extrusion of 3 mm or greater was considered pathologic. Arthroscopic findings were compared with respect to the extent of meniscal extrusion. There were 98 male patients and 150 female patients. The mean age was 53.5 years (range, 15 to 81 years). The results showed 127 cases (51.2%) in which the medial meniscus had meniscal extrusion of 3 mm or greater. Posterior root tears were found in 66 (26.6%) of the 248 knees. The mean meniscal extrusion in patients with root tear was 3.8 ± 1.4 mm, whereas the mean extrusion of those who had no root tear was 2.7 ± 1.3 mm. We found an association between pathologic meniscal extrusion and root tear (P < .001). Meniscal extrusion showed a low positive predictive value (39%) and specificity (58%) with regard to the meniscal root tear. Meniscal extrusion was also significantly correlated with severity of chondral lesions (P < .001). Considerable extrusion (≥3 mm) can be associated with tearing of the medial meniscus root and chondral lesion of the medial femoral condyle. Level IV, therapeutic case series. Copyright © 2010 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

The Burden of Cholera in Uganda

PubMed Central

Bwire, Godfrey; Malimbo, Mugagga; Maskery, Brian; Kim, Young Eun; Mogasale, Vittal; Levin, Ann

2013-01-01

Introduction In 2010, the World Health Organization released a new cholera vaccine position paper, which recommended the use of cholera vaccines in high-risk endemic areas. However, there is a paucity of data on the burden of cholera in endemic countries. This article reviewed available cholera surveillance data from Uganda and assessed the sufficiency of these data to inform country-specific strategies for cholera vaccination. Methods The Uganda Ministry of Health conducts cholera surveillance to guide cholera outbreak control activities. This includes reporting the number of cases based on a standardized clinical definition plus systematic laboratory testing of stool samples from suspected cases at the outset and conclusion of outbreaks. This retrospective study analyzes available data by district and by age to estimate incidence rates. Since surveillance activities focus on more severe hospitalized cases and deaths, a sensitivity analysis was conducted to estimate the number of non-severe cases and unrecognized deaths that may not have been captured. Results Cholera affected all ages, but the geographic distribution of the disease was very heterogeneous in Uganda. We estimated that an average of about 11,000 cholera cases occurred in Uganda each year, which led to approximately 61–182 deaths. The majority of these cases (81%) occurred in a relatively small number of districts comprising just 24% of Uganda's total population. These districts included rural areas bordering the Democratic Republic of Congo, South Sudan, and Kenya as well as the slums of Kampala city. When outbreaks occurred, the average duration was about 15 weeks with a range of 4–44 weeks. Discussion There is a clear subdivision between high-risk and low-risk districts in Uganda. Vaccination efforts should be focused on the high-risk population. However, enhanced or sentinel surveillance activities should be undertaken to better quantify the endemic disease burden and high-risk populations

Apical extrusion of debris: a literature review of an inherent occurrence during root canal treatment.

PubMed

Tanalp, J; Güngör, T

2014-03-01

Extrusion of intracanal debris as well as irrigants is a common occurrence during root canal treatment, and no instrument or technique has thoroughly solved this problem. Because flare-ups may arise with any irritation directed towards periapical tissues, a shaping or irrigation technique should minimize the risk of apical extrusion, even though it may not be prevented. There has been a rapid evolution of root canal instruments and irrigation systems through the last decade, and many have been assessed for their debris extrusion potential. The purpose of this review was to identify publications regarding the evaluation of debris, bacteria and irrigant extrusion during root canal treatment. A PubMed, Ovid and MEDLINE search was conducted using the keywords "apical extrusion", "debris extrusion" and "endodontic treatment". The literature search extended over a period of more than 30 years up to 2012. Content of the review was limited to apical extrusion of debris and irrigants, extrusion of liquid by irrigation methods and bacterial extrusion. Issues relevant to apical extrusion were obtained by further search in the reference sections of the retrieved articles. The review provides an update on the current status of apical extrusion. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Extrusion cast explosive

DOEpatents

Scribner, K.J.

1985-01-29

Improved, multiphase, high performance, high energy, extrusion cast explosive compositions, comprising, a crystalline explosive material; an energetic liquid plasticizer; a urethane prepolymer, comprising a blend of polyvinyl formal, and polycaprolactone; a polyfunctional isocyanate; and a catalyst are disclosed. These new explosive compositions exhibit higher explosive content, a smooth detonation front, excellent stability over long periods of storage, and lower sensitivity to mechanical stimulants. 1 fig.

Extrusion cast explosive

DOEpatents

Scribner, K.J.

1985-11-26

Disclosed is an improved, multiphase, high performance, high energy, extrusion cast explosive compositions, comprising, a crystalline explosive material; an energetic liquid plasticizer; a urethane prepolymer, comprising a blend of polyvinyl formal, and polycaprolactone; a polyfunctional isocyanate; and a catalyst. These new explosive compositions exhibit higher explosive content, a smooth detonation front, excellent stability over long periods of storage, and lower sensitivity to mechanical stimulants. 1 fig.

Crystal chemistry of pyrochlore from the Mesozoic Panda Hill carbonatite deposit, western Tanzania

NASA Astrophysics Data System (ADS)

Boniface, Nelson

2017-02-01

The Mesozoic Panda Hill carbonatite deposit in western Tanzania hosts pyrochlore, an ore and source of niobium. This study was conducted to establish the contents of radioactive elements (uranium and thorium) in pyrochlore along with the concentration of niobium in the ore. The pyrochlore is mainly hosted in sövite and is structurally controlled by NW-SE (SW dipping) or NE-SW (NW dipping) magmatic flow bands with dip angles of between 60° and 90°. Higher concentrations of pyrochlore are associated with magnetite, apatite and/or phlogopite rich flow bands. Electron microprobe analyses on single crystals of pyrochlore yield very low UO2 concentrations that range between 0 and 0.09 wt% (equivalent to 0 atoms per formula unit: a.p.f.u.) and ThO2 between 0.55 and 1.05 wt% (equivalent to 0.1 a.p.f.u.). The analyses reveal high concentrations of Nb2O5 (ranging between 57.13 and 65.50 wt%, equivalent to a.p.f.u. ranging between 1.33 and 1.43) and therefore the Panda Hill Nb-oxide is classified as pyrochlore sensu stricto. These data point to a non radioactive pyrochlore and a deposit rich in Nb at Panda Hill. The Panda Hill pyrochlore has low concentrations of REEs as displayed by La2O3 that range between 0.10 and 0.49 wt% (equivalent to a.p.f.u. ranging between 0 and 0.01) and Ce2O3 ranging between 0.86 and 1.80 wt% (equivalent to a.p.f.u. ranging between 0.02 and 0.03), Pr2O3 concentrations range between 0 and 0.23 wt% (equivalent to 0 a.p.f.u.), and Y2O3 is 0 wt% (equivalent to 0 a.p.f.u.). The abundance of the REEs in pyroclore at the Panda Hill Carbonatite deposit is of no economic significance.

A brief review of extrusion-based tissue scaffold bio-printing.

PubMed

Ning, Liqun; Chen, Xiongbiao

2017-08-01

Extrusion-based bio-printing has great potential as a technique for manipulating biomaterials and living cells to create three-dimensional (3D) scaffolds for damaged tissue repair and function restoration. Over the last two decades, advances in both engineering techniques and life sciences have evolved extrusion-based bio-printing from a simple technique to one able to create diverse tissue scaffolds from a wide range of biomaterials and cell types. However, the complexities associated with synthesis of materials for bio-printing and manipulation of multiple materials and cells in bio-printing pose many challenges for scaffold fabrication. This paper presents an overview of extrusion-based bio-printing for scaffold fabrication, focusing on the prior-printing considerations (such as scaffold design and materials/cell synthesis), working principles, comparison to other techniques, and to-date achievements. This paper also briefly reviews the recent development of strategies with regard to hydrogel synthesis, multi-materials/cells manipulation, and process-induced cell damage in extrusion-based bio-printing. The key issue and challenges for extrusion-based bio-printing are also identified and discussed along with recommendations for future, aimed at developing novel biomaterials and bio-printing systems, creating patterned vascular networks within scaffolds, and preserving the cell viability and functions in scaffold bio-printing. The address of these challenges will significantly enhance the capability of extrusion-based bio-printing. Copyright © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Phylogeny of Yellow Fever Virus, Uganda, 2016.

PubMed

Hughes, Holly R; Kayiwa, John; Mossel, Eric C; Lutwama, Julius; Staples, J Erin; Lambert, Amy J

2018-08-17

In April 2016, a yellow fever outbreak was detected in Uganda. Removal of contaminating ribosomal RNA in a clinical sample improved the sensitivity of next-generation sequencing. Molecular analyses determined the Uganda yellow fever outbreak was distinct from the concurrent yellow fever outbreak in Angola, improving our understanding of yellow fever epidemiology.

PVC extrusion development and production for the NOvA neutrino experiment

DOE PAGES

Talaga, R. L.; Grudzinski, J. J.; Phan-Budd, S.; ...

2017-03-08

We have produced large and highly-reflective open-cell PVC extrusions for the NOvA neutrino oscillation experiment. The extrusions were sealed, instrumented, assembled into self-supporting detector blocks, and filled with liquid scintillator. Each Far Detector block stands 15.7 m high, is 15.7 m wide and 2.1 m thick. More than 22,000 extrusions were produced with high dimensional tolerance and robust mechanical strength. This paper provides an overview of the NOvA Far Detector, describes the preparation of the custom PVC powder, and the making of the extrusions. As a result, quality control was a key element in the production and is described inmore » detail.« less

The topic is the Relevance of wetland economic valuation in Uganda Acase study of Kiyanja-Kaku wetland in Lwengo District-Central Uganda.

NASA Astrophysics Data System (ADS)

Namulema, Mary Jude

2016-04-01

This study examined the relevance of economic valuation of wetlands in Uganda. A case study was done on Kiyanja-Kaku wetland in Lwengo District in Central Uganda using a semi-structured survey. Three objectives were examined i.e.: (i) To identify wetland ecosystem services in Uganda (ii) To identify the economic valuation methods appropriate for wetlands in Uganda (iii) To value clean water obtained from Kiyanja-Kaku wetland. The wetland ecosystem services were identified as provisioning, regulating, habitat, cultural and amenities services. The community had knowledge about 17 out of the 22 services as given by TEEB (2010). The economic valuation methods identified were, market price, efficiency price, travel cost, contingent valuation, hedonic pricing, and production function and benefit transfer methods. These were appropriate for valuation of wetlands in Uganda but only three methods i.e. market price, contingent valuation and productivity methods have been applied by researchers in Uganda so far. The economic value of clean water from Kiyanja-Kaku wetland to the nearby community was established by using the market price of clean water the National water and Sewerage Corporation charges for the water in Uganda to obtain the low value and the market price of water from the survey was used to obtain the high value. The estimated economic value of clean water service for a household ranges from UGX. 612174 to 4054733 (US 168.0-1095.0). The estimated economic value of clean water service from Kiyanja-Kaku wetland to the entire community ranges from UGX. 2,732,133,000.0 to 18,096,274,000.0 (US 775,228.0-4,885,994.0).

Cell Extrusion: A Stress-Responsive Force for Good or Evil in Epithelial Homeostasis.

PubMed

Ohsawa, Shizue; Vaughen, John; Igaki, Tatsushi

2018-02-05

Epithelial tissues robustly respond to internal and external stressors via dynamic cellular rearrangements. Cell extrusion acts as a key regulator of epithelial homeostasis by removing apoptotic cells, orchestrating morphogenesis, and mediating competitive cellular battles during tumorigenesis. Here, we delineate the diverse functions of cell extrusion during development and disease. We emphasize the expanding role for apoptotic cell extrusion in exerting morphogenetic forces, as well as the strong intersection of cell extrusion with cell competition, a homeostatic mechanism that eliminates aberrant or unfit cells. While cell competition and extrusion can exert potent, tumor-suppressive effects, dysregulation of either critical homeostatic program can fuel cancer progression. Copyright © 2018 Elsevier Inc. All rights reserved.

Phylogenetic analysis of rubella viruses identified in Uganda, 2003-2012.

PubMed

Namuwulya, Prossy; Abernathy, Emily; Bukenya, Henry; Bwogi, Josephine; Tushabe, Phionah; Birungi, Molly; Seguya, Ronald; Kabaliisa, Theopista; Alibu, Vincent P; Kayondo, Jonathan K; Rivailler, Pierre; Icenogle, Joseph; Bakamutumaho, Barnabas

2014-12-01

Molecular data on rubella viruses are limited in Uganda despite the importance of congenital rubella syndrome (CRS). Routine rubella vaccination, while not administered currently in Uganda, is expected to begin by 2015. The World Health Organization recommends that countries without rubella vaccination programs assess the burden of rubella and CRS before starting a routine vaccination program. Uganda is already involved in integrated case-based surveillance, including laboratory testing to confirm measles and rubella, but molecular epidemiologic aspects of rubella circulation have so far not been documented in Uganda. Twenty throat swab or oral fluid samples collected from 12 districts during routine rash and fever surveillance between 2003 and 2012 were identified as rubella virus RNA positive and PCR products encompassing the region used for genotyping were sequenced. Phylogenetic analysis of the 20 sequences identified 19 genotype 1G viruses and 1 genotype 1E virus. Genotype-specific trees showed that the Uganda viruses belonged to specific clusters for both genotypes 1G and 1E and grouped with similar sequences from neighboring countries. Genotype 1G was predominant in Uganda. More epidemiological and molecular epidemiological data are required to determine if genotype 1E is also endemic in Uganda. The information obtained in this study will assist the immunization program in monitoring changes in circulating genotypes. © 2014 Wiley Periodicals, Inc.

Ca-rich carbonates associated with ultrabasic-ultramafic melts: Carbonatite or limestone xenoliths? A case study from the late Miocene Morron de Villamayor volcano (Calatrava Volcanic Field, central Spain)

NASA Astrophysics Data System (ADS)

Lustrino, Michele; Prelević, Dejan; Agostini, Samuele; Gaeta, Mario; Di Rocco, Tommaso; Stagno, Vincenzo; Capizzi, Luca Samuele

2016-07-01

The volcanic products of the late Miocene Morron de Villamayor volcano (Calatrava Volcanic Field, central Spain) are known for being one of the few outcrops of leucitites in the entire circum-Mediterranean area. These rocks are important because aragonite of mantle origin has been reported as inclusion in olivine macrocrysts. We use petrographic observations, mineral compositions, as well as oxygen and carbon isotope ratios coupled with experimental petrology to understand the origin of carbonate phase in these olivine-phyric rocks. Groundmass and macrocryst olivines range from δ18OVSMOW of +4.8‰, typical of mantle olivine values, to +7.4‰, indicating contamination by sedimentary carbonate. Carbonates are characterized by heavy oxygen isotope compositions (δ18OVSMOW >+24‰), and relatively light carbon isotopes (δ13CPDB <-11‰), resembling skarn values, and distinct from typical mantle carbonatite compositions. Petrography, mineral compositions such as low Mg# of clinopyroxene and biotite, low Ca# and low incompatible element abundance of the carbonate, and isotopic ratios of O and C, do not support a mantle origin for the carbonate. Rather, the carbonate inclusions found in the olivine macrocrysts are interpreted as basement limestone fragments entrapped by the rising crystallizing magma. Comparison with experimental carbonatitic and silicate-carbonatitic melts indicates that low-degree partial melts of a carbonated peridotite must have a dolomitic rather than the aragonitic/calcitic composition as those found trapped in the Morron de Villamayor olivine macrocrysts.

Uganda: Current Conditions and the Crisis in North Uganda

DTIC Science & Technology

2010-05-19

constitution_1995. pdf . 5 John Kakande. “Museveni Speaks on 3rd Term.” The New Vision, January 3, 2003. 6 “President Should Listen to Old Friends...tea, and to a lesser extent, maize . Crop production has been hampered by security concerns in the northern and western regions of Uganda. To stabilize

Characterization of Al-Cu-Li Alloy 2090 Near Net Shape Extrusion

NASA Technical Reports Server (NTRS)

Birt, M. J.; Domack, M. S.; Hafley, R. A.; Pollock, W. D.

1998-01-01

Aluminum-lithium (Al-Li) alloys near net shape extrusions are being evaluated for potential application in launch vehicle structures. The objective of this study was to determine tensile and fracture properties, corrosion resistance, and weldability of integrally stiffened panels of Al-Cu-Li alloy 2090 in the T8 temper. The microstructure was pre-dominantly unrecrystallized. Texture analyses revealed the presence of fiber components in the stiffeners and a combination of fiber and rolling components in the skin. Variations in grain morphology and texture through the extruded cross section were correlated with the tensile, fracture, and corrosion behavior. Tensile strengths at room and cryogenic temperatures of the 2090 extrusions were similar to other 2090 product forms and were higher than 2219-T87, the primary structural material in the Space Shuttle external tank; however, ductilities were lower. The fracture resistance of the 2090 extrusion was lower than 2219-T87 plate at room temperature. At cryogenic temperatures, tensile ductility and fracture behavior of the 2090 extrusion were similar to other 2090 product forms but were lower than 2219-T87 plate. The exfoliation and stress corrosion resistance of the 2090 extrusion compared favorably with the characteristics of other 2090 product forms. The weldability and weldment properties of the extrusions were similar to 2090 and 2219 plates.

Geophysical Characterization of a Rare Earth Element Enriched Carbonatite Terrane at Mountain Pass, California Eastern Mojave Desert

NASA Astrophysics Data System (ADS)

Denton, Kevin M.

Mountain Pass, California, located in the eastern Mojave Desert, hosts one of the world's richest rare earth element (REE) deposits. The REE-rich rocks occur in a 2.5 km- wide, north-northwest trending zone of Mesoproterozoic (1.4-1.42 Ga) stocks and dikes, which intrude a larger Paleoproterozoic (1.7 Ga) schist-gneiss terrane that extends 10 km southward from Clark Mountain to the Mescal Range. Several REE-enriched bodies make up the Mountain Pass intrusive suite including shonkinite, syenite, and granite comprising an ultrapotassic intrusive suite and the Sulphide Queen carbonatite body. Two-dimensional modeling of gravity, magnetic, and electrical resistivity data reveals that the Mountain Pass intrusive suite is associated with a local gravity high that is superimposed on a 4-km wide gravity terrace. Rock property data indicate that the Mountain Pass intrusive suite is unusually nonmagnetic at the surface (2.0 x 10-3 SI, n = 67). However, aeromagnetic data indicate that these rocks occur along the eastern edge of a prominent north-northwest trending aeromagnetic high of unknown origin. The source of this unknown magnetic anomaly is 2-3 km below the surface and coincides with a body of rock having high electrical conductivity. Electrical resistivity models indicate that this unknown magnetic anomaly is several orders of magnitude more conductive (103 O•m) than the surrounding rock. Combined geophysical data suggest that the carbonatite and its associated ultrapotassic intrusive suite were preferentially emplaced along a northwest zone of weakness and/or a fault.

Micromechanics of an Extrusion in High-Cycle Fatigue

DTIC Science & Technology

1988-08-22

length of R would be longer than the slot by an amount referred to as the "static extrusion" by Mughrabi et al . (1983). This e,,. causes an initial... Mughrabi (1980) in their studies of persistent slip bands. Extrusions and intru- sions in fatigue specimens were also observed by a number of other...interstitial dislocation dipoles, and a negative e("i by vacancy dipoles. Recently, Antoncpoulus, Brown and Winter (1976) and Mughrabi , Wang, Differt and

Embedded Multimaterial Extrusion Bioprinting.

PubMed

Rocca, Marco; Fragasso, Alessio; Liu, Wanjun; Heinrich, Marcel A; Zhang, Yu Shrike

2018-04-01

Embedded extrusion bioprinting allows for the generation of complex structures that otherwise cannot be achieved with conventional layer-by-layer deposition from the bottom, by overcoming the limits imposed by gravitational force. By taking advantage of a hydrogel bath, serving as a sacrificial printing environment, it is feasible to extrude a bioink in freeform until the entire structure is deposited and crosslinked. The bioprinted structure can be subsequently released from the supporting hydrogel and used for further applications. Combining this advanced three-dimensional (3D) bioprinting technique with a multimaterial extrusion printhead setup enables the fabrication of complex volumetric structures built from multiple bioinks. The work described in this paper focuses on the optimization of the experimental setup and proposes a workflow to automate the bioprinting process, resulting in a fast and efficient conversion of a virtual 3D model into a physical, extruded structure in freeform using the multimaterial embedded bioprinting system. It is anticipated that further development of this technology will likely lead to widespread applications in areas such as tissue engineering, pharmaceutical testing, and organs-on-chips.

Extrusion die and method

DOEpatents

Lipp, G. Daniel

1994-05-03

A method and die apparatus for manufacturing a honeycomb body of triangular cell cross-section and high cell density, the die having a combination of (i) feedholes feeding slot intersections and (ii) feedholes feeding slot segments not supplied from slot intersections, whereby a reduction in feedhole count is achieved while still retaining good extrusion efficiency and extrudate uniformity.

Consolidation of Fe16N2 Magnets Using Equal Channel Angular Extrusion

DTIC Science & Technology

2015-06-11

industry such as powder metallurgy and hot deformation. The latter require treatments at high temperatures, typically around 1000 oC. In this work...have any deteriorating effects on the magnetization values (compared to the powder ). However, extrusions at temperatures ~150 oC result in a small...Extrusions at temperatures up to ~150 oC do not have any deteriorating effects on the magnetization values (compared to the powder ). However, extrusions at

Evaluation of 4 Different Irrigating Systems for Apical Extrusion of Sodium Hypochlorite.

PubMed

Yost, Ross A; Bergeron, Brian E; Kirkpatrick, Timothy C; Roberts, Mark D; Roberts, Howard W; Himel, Van T; Sabey, Kent A

2015-09-01

The aim of this study was to evaluate NaOCl apical extrusion by using negative apical pressure (EndoVac), sonic agitation (EndoActivator), side-vented needle (Max-i-Probe), and photon induced photoacoustic streaming (PIPS 10 mJ and PIPS 20 mJ) laser irrigation in an in vitro gel model. Extracted mandibular and maxillary central incisors (n = 18) were prepared to size 35/.04 and 55/.04, respectively. Teeth were mounted in transparent containers with clear acrylic and suspended in a color-changing pH-sensitive gel, creating a closed system. By using a crossover design, each tooth was sequentially irrigated by using 6% NaOCl with each device following manufacturers' recommendations. Each tooth served as its own control. Pre-irrigation and post-irrigation buccal and proximal view photographs served to measure the longest distance of extrusion and were analyzed with ImageJ software. Mean results were analyzed by using Kruskal-Wallis and Dunn post hoc test (P < .05). There were no significant differences between EndoVac, EndoActivator, and the passive extrusion groups. The EndoVac and EndoActivator groups produced significantly less extrusion than PIPS irrigation. Max-i-Probe extrusion results were more variable than those of EndoActivator but had no significant difference. Across all irrigation systems, there were no significant differences with respect to apical preparation size. Under the in vitro conditions of this study, no difference was found between the 10 mJ and 20 mJ PIPS laser groups. EndoVac demonstrated significantly less potential for apical extrusion than PIPS and Max-i-Probe, whereas apical preparation size did not significantly affect extrusion of irrigant. The potential for apical extrusion of endodontic irrigants should be a consideration when selecting a system for final irrigation. Published by Elsevier Inc.

Dilemmas in Implementing Language Rights in Multilingual Uganda

ERIC Educational Resources Information Center

Namyalo, Saudah; Nakayiza, Judith

2015-01-01

Even after decades of uttering platitudes about the languages of Uganda, language policy pronouncements have invariably turned out to be public relations statements rather than blueprints for action. A serious setback for the right to linguistic equality and the right to use Uganda's indigenous languages has largely hinged on the language…

Microfabrication of three-dimensional filters for liposome extrusion

NASA Astrophysics Data System (ADS)

Baldacchini, Tommaso; Nuñez, Vicente; LaFratta, Christopher N.; Grech, Joseph S.; Vullev, Valentine I.; Zadoyan, Ruben

2015-03-01

Liposomes play a relevant role in the biomedical field of drug delivery. The ability of these lipid vesicles to encapsulate and transport a variety of bioactive molecules has fostered their use in several therapeutic applications, from cancer treatments to the administration of drugs with antiviral activities. Size and uniformity are key parameters to take into consideration when preparing liposomes; these factors greatly influence their effectiveness in both in vitro and in vivo experiments. A popular technique employed to achieve the optimal liposome dimension (around 100 nm in diameter) and uniform size distribution is repetitive extrusion through a polycarbonate filter. We investigated two femtosecond laser direct writing techniques for the fabrication of three-dimensional filters within a microfluidics chip for liposomes extrusion. The miniaturization of the extrusion process in a microfluidic system is the first step toward a complete solution for lab-on-a-chip preparation of liposomes from vesicles self-assembly to optical characterization.

Fracture toughness measurements of three titanium alloy extrusions

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeSisto, T.S.

1973-07-01

Plane strain static K/sub Ic/ and dynamic Kid measurements were obtained on 3-in. dia. titanium alloy extrusions which received a 5.9: 1 reduction followed by air cooling. The alloys investigated were Ti-6Al--6V--2Sn, Ti--8Mo-- 8V--2Fe--3Al, and Ti-- 11.5Mo-6Zr-4.5Sn (Beta III). Compact tension specimens were used to obtain K/sub Ic/ measurements and precracked standard Charpy V- notched specimens were used to obtain Kid measurements. The highest K/sub Ic/ and K /sub Id/ values were obtained from the Beta III extrusion while the lowest K/sub Ic/ and K/sub Id/ values were obtained for the Ti-8Mo--8V--2Fe -- 3Al extrusion. Good agreement was found tomore » exist between K/sub Ic/ values obtained from precracked Charpy V-notch specimens and compact tension specimens. (auth)« less

75 FR 57441 - Aluminum Extrusions From the People's Republic of China: Alignment of Final Countervailing Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... DEPARTMENT OF COMMERCE International Trade Administration [C-570-968] Aluminum Extrusions From the... countervailing duty investigation of aluminum extrusions from the People's Republic of China (PRC) with the final... antidumping duty investigations on aluminum extrusions from the PRC. See Aluminum Extrusions from the People's...

Spontaneous extrusion of a stainless steel glaucoma drainage implant (Ex-PRESS).

PubMed

Tavolato, M; Babighian, S; Galan, A

2006-01-01

To report a case of spontaneous extrusion of a stainless steel glaucoma drainage implant (Ex-PRESS). An Ex-PRESS was implanted under the conjunctiva in a 76-year-old man with primary open-angle glaucoma. Two years after implantation, the Ex-Press extruded spontaneously. Despite this adverse event, there was no increase in intraocular pressure. This is the first report of spontaneous extrusion of an Ex-PRESS device. Implanting the device under a scleral flap should be considered to avoid adverse events such as extrusion or conjunctival erosion.

Numerical studies of temperature effect on the extrusion fracture and swell of plastic micro-pipe

NASA Astrophysics Data System (ADS)

Ren, Zhong; Huang, Xingyuan; Xiong, Zhihua

2018-03-01

Temperature is a key factor that impacts extrusion forming quality of plastic micro-pipe. In this study, the effect of temperature on extrusion fracture and swell of plastic micro-pipe was investigated by numerical method. Under a certain of the melt’s flow volume, the extrusion pattern, extrusion swelling ratio of melt are obtained under different temperatures. Results show that the extrusion swelling ratio of plastic micro-pipe decreases with increasing of temperature. In order to study the reason of temperature effect, the physical distributions of plastic micro-pipe are gotten. Numerical results show that the viscosity, pressure, stress value of melt are all decreased with the increasing of temperature, which leads to decrease the extrusion swell and fracture phenomenon for the plastic micro-pipe.

Extrusion conditions affect chemical composition and in vitro digestion of select food ingredients.

PubMed

Dust, Jolene M; Gajda, Angela M; Flickinger, Elizabeth A; Burkhalter, Toni M; Merchen, Neal R; Fahey, George C

2004-05-19

An experiment was conducted to determine the effects of extrusion conditions on chemical composition and in vitro hydrolytic and fermentative digestion of barley grits, cornmeal, oat bran, soybean flour, soybean hulls, and wheat bran. Extrusion conditions altered crude protein, fiber, and starch concentrations of ingredients. Organic matter disappearance (OMD) increased for extruded versus unprocessed samples of barley grits, cornmeal, and soybean flour that had been hydrolytically digested. After 8 h of fermentative digestion, OMD decreased as extrusion conditions intensified for barley grits and cornmeal but increased for oat bran, soybean hulls, and wheat bran. Total short-chain fatty acid production decreased as extrusion conditions intensified for barley grits, soybean hulls, and soybean flour. These data suggest that the effects of extrusion conditions on ingredient composition and digestion are influenced by the unique chemical characteristics of individual substrates.

Musculoskeletal trauma services in Uganda.

PubMed

Naddumba, E K

2008-10-01

Approximately 2000 lives are lost in Uganda annually through road traffic accidents. In Kampala, they account for 39% of all injuries, primarily in males aged 16-44 years. They are a result of rapid motorization and urbanization in a country with a poor economy. Uganda's population is an estimated 28 million with a growth rate of 3.4% per year. Motorcycles and omnibuses, the main taxi vehicles, are the primary contributors to the accidents. Poor roads and drivers compound the situation. Twenty-three orthopaedic surgeons (one for every 1,300,000 people) provide specialist services that are available only at three regional hospitals and the National Referral Hospital in Kampala. The majority of musculoskeletal injuries are managed nonoperatively by 200 orthopaedic officers distributed at the district, regional and national referral hospitals. Because of the poor economy, 9% of the national budget is allocated to the health sector. Patients with musculoskeletal injuries in Uganda frequently fail to receive immediate care due to inadequate resources and most are treated by traditional bonesetters. Neglected injuries typically result in poor outcomes. Possible solutions include a public health approach for prevention of road traffic injuries, training of adequate human resources, and infrastructure development.

Hot-melt extrusion of sugar-starch-pellets.

PubMed

Yeung, Chi-Wah; Rein, Hubert

2015-09-30

Sugar-starch-pellets (syn. sugar spheres) are usually manufactured through fluidized bed granulation or wet extrusion techniques. This paper introduces hot-melt extrusion (HME) as an alternative method to manufacture sugar-starch-pellets. A twin-screw extruder coupled with a Leistritz Micro Pelletizer (LMP) cutting machine was utilized for the extrusion of different types (normal-, waxy-, and high-amlyose) of corn starch, blended with varying amounts of sucrose. Pellets were characterized for their physicochemical properties including crystallinity, particle size distribution, tensile strength, and swelling expansion. Furthermore, the influence of sugar content and humidity on the product was investigated. Both sucrose and water lowered the Tg of the starch system allowing a convenient extrusion process. Mechanical strength and swelling behavior could be associated with varying amylose and amylopectin. X-ray powder diffractometric (XRPD) peaks of increasing sucrose contents appeared above 30%. This signified the oversaturation of the extruded starch matrix system with sucrose. Otherwise, had the dissolved sucrose been embedded into the molten starch matrix, no crystalline peak could have been recognized. The replacement of starch with sucrose reduced the starch pellets' swelling effect, which resulted in less sectional expansion (SEI) and changed the surface appearance. Further, a nearly equal tensile strength could be detected for sugar spheres with more than 40% sucrose. This observation stands in good relation with the analyzed values of the commercial pellets. Both techniques (fluidized bed and HME) allowed a high yield of spherical pellets (less friability) for further layering processes. Thermal influence on the sugar-starch system is still an obstacle to be controlled. Copyright © 2015 Elsevier B.V. All rights reserved.

Phylogenetic Analysis of Rubella Viruses Identified in Uganda, 2003–2012

PubMed Central

Namuwulya, Prossy; Abernathy, Emily; Bukenya, Henry; Bwogi, Josephine; Tushabe, Phionah; Birungi, Molly; Seguya, Ronald; Kabaliisa, Theopista; Alibu, Vincent P.; Kayondo, Jonathan K.; Rivailler, Pierre; Icenogle, Joseph; Bakamutumaho, Barnabas

2014-01-01

Molecular data on rubella viruses are limited in Uganda despite the importance of congenital rubella syndrome (CRS). Routine rubella vaccination, while not administered currently in Uganda, is expected to begin by 2015. The World Health Organization recommends that countries without rubella vaccination programs assess the burden of rubella and CRS before starting a routine vaccination program. Uganda is already involved in integrated case-based surveillance, including laboratory testing to confirm measles and rubella, but molecular epidemiologic aspects of rubella circulation have so far not been documented in Uganda. Twenty throat swab or oral fluid samples collected from 12 districts during routine rash and fever surveillance between 2003 and 2012 were identified as rubella virus RNA positive and PCR products encompassing the region used for genotyping were sequenced. Phylogenetic analysis of the 20 sequences identified 19 genotype 1G viruses and 1 genotype 1E virus. Genotype-specific trees showed that the Uganda viruses belonged to specific clusters for both genotypes 1G and 1E and grouped with similar sequences from neighboring countries. Genotype 1G was predominant in Uganda. More epidemiological and molecular epidemiological data are required to determine if genotype 1E is also endemic in Uganda. The information obtained in this study will assist the immunization program in monitoring changes in circulating genotypes. PMID:24700073

Computer aided design of extrusion forming tools for complex geometry profiles

NASA Astrophysics Data System (ADS)

Goncalves, Nelson Daniel Ferreira

In the profile extrusion, the experience of the die designer is crucial for obtaining good results. In industry, it is quite usual the need of several experimental trials for a specific extrusion die before a balanced flow distribution is obtained. This experimental based trial-and-error procedure is time and money consuming, but, it works, and most of the profile extrusion companies rely on such method. However, the competition is forcing the industry to look for more effective procedures and the design of profile extrusion dies is not an exception. For this purpose, computer aided design seems to be a good route. Nowadays, the available computational rheology numerical codes allow the simulation of complex fluid flows. This permits the die designer to evaluate and to optimize the flow channel, without the need to have a physical die and to perform real extrusion trials. In this work, a finite volume based numerical code was developed, for the simulation of non-Newtonian (inelastic) fluid and non-isothermal flows using unstructured meshes. The developed code is able to model the forming and cooling stages of profile extrusion, and can be used to aid the design of forming tools used in the production of complex profiles. For the code verification three benchmark problems were tested: flow between parallel plates, flow around a cylinder, and the lid driven cavity flow. The code was employed to design two extrusion dies to produce complex cross section profiles: a medical catheter die and a wood plastic composite profile for decking applications. The last was experimentally validated. Simple extrusion dies used to produced L and T shaped profiles were studied in detail, allowing a better understanding of the effect of the main geometry parameters on the flow distribution. To model the cooling stage a new implicit formulation was devised, which allowed the achievement of better convergence rates and thus the reduction of the computation times. Having in mind the

Origin of carbonatites of the Matcha alkaline pluton from Turkestan-Alai ridge, Kyrgyz Southern Tien Shan

NASA Astrophysics Data System (ADS)

Vrublevskii, V. V.

2017-12-01

Postorogenic alkaline intrusions in the Turkestan-Alai segment of the Southern Tien Shan coexist with dikes and veins of carbonatites dated at ˜220 Ma. They are primarily composed of calcite and dolomite (60-85 %), as well as sodic amphibole, phlogopite, clinopyroxene, microcline, albite, apatite, and magnetite, with accessory niobate, ilmenite, Nb-rutile, titanite, zircon, baddeleyite, monazite-(Ce), barite, and sulfides. The rocks share mineralogical and geochemical similarity with carbonatites that originated by liquid immiscibility at high temperatures above 500°C. Silicate and salt-carbonate melts are derived from sources with mainly negative bulk ɛND(t) ˜ from -11 to 0 and high initial 87Sr/86Sr ratios (˜ 0.7061-0.7095) which may be due to mixing of PREMA and EM-type mantle material. Pb isotopic ratios in accessory pyrrhotite (206Pb/204Pb = 18.38; 207Pb/204Pb = 15.64; 208Pb/204Pb = 38.41) exhibit an EM 2 trend. The intrusions bear signatures of significant crustal contamination as a result of magma genesis by syntexis and hybridism. Concordant isotope composition changes of δ 13C (-6.5 to -1.9 ‰), δ 18O (9.2-23 %„), δD (-58 to -41 %„), and δ 34S (12.6-12.8 ‰) in minerals and rocks indicate inputs of crustal material at the stage of melting and effect of hot fluids released during dehydration of metamorphosed oceanic basalts or sediments. The observed HFSE patterns of the oldest alkaline gabbro may be due to interaction of the primary mafic magma with IAB-type material. The isotope similarity of alkaline rocks with spatially proximal basalts of the Tarim large igneous province does not contradict the evolution of the Turkestan-Alai Triassic magmatism as the «last echo» of the Tarim mantle plume.

Inherited Fe and Ti electron transition spectroscopic features in altered ultramafic-carbonatite intrusives

NASA Astrophysics Data System (ADS)

Shavers, E. J.; Ghulam, A.; Encarnacion, J. P.

2016-12-01

Spectroscopic reflectance in the visible to short-wave infrared region is an important tool for remote geologic mapping and is applied at scales from satellite to field measurements. Remote geologic mapping is challenging in regions subject to significant surficial weathering. Here we identify absorption features found in altered volcanic pipes and dikes in the Avon Volcanic District, Missouri, that are inherited from the original ultramafic and carbonatite lithology. Alteration ranges from small degree hydrothermal alteration to extensive laterization. The absorption features are three broad minima centered near 690, 890, and 1100 nm. Features in this region are recognized to be caused by ferric and ferrous Fe minerals including olivine, carbonates, chlorite, and goethite all of which are found among the Avon pipes and dikes that are in various stages of alteration. Iron-related intervalence charge transfer and crystal field perturbations of ions are the principal causes of the spectroscopic features in the visible to near-infrared region yet spectra are also distorted by factors like texture and the presence of opaque minerals known to reduce overall reflectance. In the Avon samples, Fe oxide content can reach >15 wt% leading to prominent absorption features even in the less altered ultramafics with reflectance curve maxima as low as 5%. The exaggerated minima allow the altered intrusive rocks to stand out among other weathered lithologies that will often have clay features in the region yet have lower iron concentration. The absorption feature centered near 690 nm is particularly noteworthy. Broad mineral-related absorption features centered at this wavelength are rare but have been linked to Ti3+ in octahedral coordination. The reduced form of Ti is not common in surface lithologies. Titanium-rich andradite has Ti3+ in the octahedral position, is resistant to weathering, is found among the Avon lithologies including ultramafic, carbonatite, and carbonated

The Development of Professional Counseling in Uganda: Current Status and Future Trends

ERIC Educational Resources Information Center

Senyonyi, Ruth M.; Ochieng, Lois A.; Sells, James

2012-01-01

Professional counseling in Uganda has foundations in traditional cultures of its peoples, guidance offered in schools, and counseling to curb the HIV/AIDS epidemic. Currently, a definitive professional counselor profile in Uganda is being established. The Uganda Counselling Association continues the process of seeking legal authority to regulate…

Unintended pregnancy and abortion in Uganda.

PubMed

Hussain, Rubina

2013-01-01

Unintended pregnancy is common in Uganda, leading to high levels of unplanned births, unsafe abortions, and maternal injury and death. Because most pregnancies that end in abortion are unwanted, nearly all ill health and mortality resulting from unsafe abortion is preventable. This report summarizes evidence on the context and consequences of unintended pregnancy and unsafe abortion in Uganda, points out gaps in knowledge, and highlights steps that can be taken to reduce levels of unintended pregnancy and unsafe abortion, and, in turn, the high level of maternal mortality.

A climate trend analysis of Uganda

USGS Publications Warehouse

Funk, Christopher C.; Rowland, Jim; Eilerts, Gary; White, Libby

2012-01-01

This brief report, drawing from a multi-year effort by the U.S. Agency for International Development (USAID) Famine Early Warning Systems Network (FEWS NET), identifies observed changes in rainfall and temperature in Uganda, based on an analysis of a quality-controlled, long time series of station observations throughout Uganda. Extending recent trends forward, it also provides a current and near-future context for understanding the actual nature of climate change impacts in the country, and a basis for identifying climate adaptations that may protect and improve the country's food security.

The role of liquid-liquid immiscibility and crystal fractionation in the genesis of carbonatite magmas: insights from Kerimasi melt inclusions

NASA Astrophysics Data System (ADS)

Guzmics, Tibor; Zajacz, Zoltán; Mitchell, Roger H.; Szabó, Csaba; Wälle, Markus

2015-02-01

We have reconstructed the compositional evolution of the silicate and carbonate melt, and various crystalline phases in the subvolcanic reservoir of Kerimasi Volcano in the East African Rift. Trace element concentrations of silicate and carbonate melt inclusions trapped in nepheline, apatite and magnetite from plutonic afrikandite (clinopyroxene-nepheline-perovskite-magnetite-melilite rock) and calciocarbonatite (calcite-apatite-magnetite-perovskite-monticellite-phlogopite rock) show that liquid immiscibility occurred during the generation of carbonatite magmas from a CO2-rich melilite-nephelinite magma formed at relatively high temperatures (1,100 °C). This carbonatite magma is notably more calcic and less alkaline than that occurring at Oldoinyo Lengai. The CaO-rich (32-41 wt%) nature and alkali-"poor" (at least 7-10 wt% Na2O + K2O) nature of these high-temperature (>1,000 °C) carbonate melts result from strong partitioning of Ca (relative to Mg, Fe and Mn) in the immiscible carbonate and the CaO-rich nature (12-17 wt%) of its silicate parent (e.g., melilite-nephelinite). Evolution of the Kerimasi carbonate magma can result in the formation of natrocarbonatite melts with similar composition to those of Oldoinyo Lengai, but with pronounced depletion in REE and HFSE elements. We suggest that this compositional difference results from the different initial parental magmas, e.g., melilite-nephelinite at Kerimasi and a nephelinite at Oldoinyo Lengai. The difference in parental magma composition led to a significant difference in the fractionating mineral phase assemblage and the element partitioning systematics upon silicate-carbonate melt immiscibility. LA-ICP-MS analysis of coeval silicate and carbonate melt inclusions provides an opportunity to infer carbonate melt/silicate melt partition coefficients for a wide range of elements. These data show that Li, Na, Pb, Ca, Sr, Ba, B, all REE (except Sc), U, V, Nb, Ta, P, Mo, W and S are partitioned into the carbonate

Orthodontic extrusion for pre-implant site enhancement: Principles and clinical guidelines.

PubMed

Alsahhaf, Abdulaziz; Att, Wael

2016-07-01

The aim of this paper is to provide a concise overview about the principles of pre-implant orthodontic extrusion, describe methods and techniques available and provide the clinicians with guidelines about its application. A number of reports describe orthodontic extrusion as a reliable method for pre-implant site enhancement. However, no standard protocols have been provided about the application of this technique. The literature database was searched for studies involving implant site enhancement by means of orthodontic extrusion. Information about the principles, indications and contraindications of this method, type of anchorage, force and time were obtained from the literature. Despite that the scarce data is largely limited to case reports and case series, implant site enhancement by means of orthodontic extrusion seems to be a promising option to improve soft and hard tissue conditions prior to implant placement. Orthodontic extrusion is being implemented as a treatment alternative to enhance hard and soft tissue prior to implant placement. While the current literature does not provide clear guidelines, the decision making for a specific approach seems to be based on the clinician's preferences. Clinical studies are needed to verify the validity of this treatment option. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Oil industry in Uganda: The socio-economic effects on the people of Kabaale Village, Hoima, and Bunyoro region in Uganda

NASA Astrophysics Data System (ADS)

Kyomugasho, Miriam

This thesis examines the socio-economic effects of oil industry on the people of Kabaale Village, Hoima, and Bunyoro region in Uganda. The thesis analyses the current political economy of Uganda and how Uganda is prepared to utilize the proceeds from the oil industry for the development of the country and its people. In addition, the research examines the effects of industry on the people of Uganda by analyzing how the people of Kabaale in Bunyoro region were affected by the plans to construct oil refinery in their region. This field research was done using qualitative methods and the Historical Materialism theoretical framework guided the study. The major findings include; displacement of people from land especially women, lack of accountability from the leadership, and less citizen participation in the policy formulation and oil industry. Ugandans, East Africans and the wider Pan-African world need to re-organize their socio-economic structure to enable people own means of production; participate and form labor organizations. Additionally, there is a need for oil producing African countries to unite and setup and oil fund for resources and investment instead of relying on foreign multinationals or become rentier states.

Co-extrusion of semi-finished aluminium-steel compounds

NASA Astrophysics Data System (ADS)

Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Klose, C.; Behrens, B.-A.; Maier, H. J.

2017-10-01

The combination of light metals and steels allows for new lightweight components with wear-resistant functional surfaces. Within the Collaborative Research Centre 1153 novel process chains are developed for the manufacture of such hybrid components. Here, the production process of a hybrid bearing bushing made of the aluminium alloy EN AW-6082 and the case-hardened steel 20MnCr5 is developed. Hybrid semi-finished products are an attractive alternative to conventional ones resulting from massive forming processes where the individual components are joined after the forming process. The actual hybrid semi-finished products were manufactured using a lateral angular co-extrusion (LACE) process. The bearing bushings are subsequently produced by die forging. In the present study, a tool concept for the LACE process is described, which renders the continuous joining of a steel rod with an aluminium tube possible. During the LACE process, the rod is fed into the extrusion die at an angle of approx. 90°. Metallographic analysis of the hybrid profile showed that the mechanical bonding between the different materials begins about 75 mm after the edge of the aluminium sheath. In order to improve the bonding strength, the steel rod is to be preheated during extrusion. Systematic investigations using a dilatometer, considering the maximum possible co-extrusion process parameters, were carried out. The variable parameters for the dilatometer experiments were determined by numerical simulation. In order to form a bond between the materials, the oxide layer needs to be disrupted during the co-extrusion process. In an attempt to better understand this effect, a modified sample geometry with chamfered steel was developed for the dilatometer experiments. The influence of the process parameters on the formation of the intermetallic phase at the interface was analysed by scanning electron microscopy and X-ray diffraction. This article, which was originally published online on 16

Method for producing through extrusion an anisotropic magnet with high energy product

DOEpatents

Chandhok, Vijay K.

2004-09-07

A method for producing an anisotropic magnet with high energy product through extrusion and, more specifically, by placing a particle charge of a composition from the which magnet is to be produced in a noncircular container, heating the container and particle charge and extruding the container and particle charge through a noncircular extrusion die in such a manner that one of the cross-sectional axes or dimension of the container and particle charge is held substantially constant during the extrusion to compact the particle charge to substantially full density by mechanical deformation produced during the extrusion to achieve a magnet with anisotropic magnetic properties along the axes or dimension thereof and, more specifically, a high energy product along the transverse of the smallest cross-sectional dimension of the extruded magnet.

Life Underneath the Deccan Trap: New Insights from Stable C, O and Clumped Isotopes from the Cretaceous Stromatolites Underneath the Amba Dongar Carbonatite Body, Gujarat, Western India

NASA Astrophysics Data System (ADS)

Banerjee, Y.; Ghosh, P.; Fosu, B. R.; Viladkar, S.

2016-12-01

Amba Dongar carbonatite-alkaline complex has been a longstanding subject of interest for the geoscientists as it is one of the best examples of a carbonatite ring dike complex emplaced in the western part of the Deccan Flood Basalts. The emplacement age at the K-T boundary (65 ma,) (1) makes it an exclusive body to understand the complexity of the Deccan eruption. Radiogenic Sr isotope study of carbonatites and alkaline silicate rocks of this complex indicate their cogenetic origin (1). The Amba Dongar complex intrudes cretaceous sedimentary layers known as the Bagh Formation of early to middle cretaceous based on biostratigraphic correlation (2). Although the carbonatite body has been investigated widely but only few attempts were made to investigate the sedimentary formations underneath. Here we report occurrence of cretaceous stromatolite deposit from the Amba Dongar complex. These stromatolites, previously interpreted as Travertine (3), occurs as thick sedimentary deposits in the valleys of Amba Dongar dome. Our preliminary stable C and O isotope results show a range of δ13CVPDB values from -2.24 to -3.90 ‰ while δ18OVPDB values ranges from -1.43 to -8.10‰ which is isotopically distinct from the Bagh Bed sediments investigated by others (4). In a δ13C vs δ18O crossplot, values are consistent with palustrine carbonates of Lameta Beds (4). The comparison between our results with the other cretaceous stromatolites deposits showed that the stromatolites from Amba Dongar were deposited in a coastal environment and that with the phanerozoic seawater δ13C , δ18O evolution curve given by (5) confirms its late cretaceous age. Based on the petrography studies, we speculate presence of organic debris in the layered structures and possible indication of thermal maturity (as the deposit is intruded by the Deccan basalt) suggesting reservoir characteristic of a hydrocarbon deposit. Further Clumped isotope investigation of the carbonate and organic matter extraction

The Medical Research Council (UK)/Uganda Virus Research Institute Uganda Research Unit on AIDS--'25 years of research through partnerships'.

PubMed

Kaleebu, P; Kamali, A; Seeley, J; Elliott, A M; Katongole-Mbidde, E

2015-02-01

For the past 25 years, the Medical Research Council/Uganda Virus Research Institute Uganda Research Unit on AIDS has conducted research on HIV-1, coinfections and, more recently, on non-communicable diseases. Working with various partners, the research findings of the Unit have contributed to the understanding and control of the HIV epidemic both in Uganda and globally, and informed the future development of biomedical HIV interventions, health policy and practice. In this report, as we celebrate our silver jubilee, we describe some of these achievements and the Unit's multidisciplinary approach to research. We also discuss the future direction of the Unit; an exemplar of a partnership that has been largely funded from the north but led in the south. © 2014 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

The Energetics and Physiological Impact of Cohesin Extrusion.

PubMed

Vian, Laura; Pękowska, Aleksandra; Rao, Suhas S P; Kieffer-Kwon, Kyong-Rim; Jung, Seolkyoung; Baranello, Laura; Huang, Su-Chen; El Khattabi, Laila; Dose, Marei; Pruett, Nathanael; Sanborn, Adrian L; Canela, Andres; Maman, Yaakov; Oksanen, Anna; Resch, Wolfgang; Li, Xingwang; Lee, Byoungkoo; Kovalchuk, Alexander L; Tang, Zhonghui; Nelson, Steevenson; Di Pierro, Michele; Cheng, Ryan R; Machol, Ido; St Hilaire, Brian Glenn; Durand, Neva C; Shamim, Muhammad S; Stamenova, Elena K; Onuchic, José N; Ruan, Yijun; Nussenzweig, Andre; Levens, David; Aiden, Erez Lieberman; Casellas, Rafael

2018-05-17

Cohesin extrusion is thought to play a central role in establishing the architecture of mammalian genomes. However, extrusion has not been visualized in vivo, and thus, its functional impact and energetics are unknown. Using ultra-deep Hi-C, we show that loop domains form by a process that requires cohesin ATPases. Once formed, however, loops and compartments are maintained for hours without energy input. Strikingly, without ATP, we observe the emergence of hundreds of CTCF-independent loops that link regulatory DNA. We also identify architectural "stripes," where a loop anchor interacts with entire domains at high frequency. Stripes often tether super-enhancers to cognate promoters, and in B cells, they facilitate Igh transcription and recombination. Stripe anchors represent major hotspots for topoisomerase-mediated lesions, which promote chromosomal translocations and cancer. In plasmacytomas, stripes can deregulate Igh-translocated oncogenes. We propose that higher organisms have coopted cohesin extrusion to enhance transcription and recombination, with implications for tumor development. Copyright © 2018 Elsevier Inc. All rights reserved.

Nursing care of AIDS patients in Uganda.

PubMed

Fournier, Bonnie; Kipp, Walter; Mill, Judy; Walusimbi, Mariam

2007-07-01

This article reports the findings from a participatory action research study concerning the experience of Ugandan nurses caring for individuals with HIV illness. Six key informants from government and non-governmental organizations were interviewed using a semistructured format. Six nurses from a large national referral hospital in Kampala, Uganda, participated in 10 focus group meetings during a period of 11 months. In-depth interviews, focus groups, and photovoice were used to collect the data. Findings indicate that nurses faced many challenges in their daily care, including poverty, insufficient resources, fear of contagion, and lack of ongoing education. Nurses experienced moral distress due to the many challenges they faced during the care of their patients. Moral distress may lead nurses to quit their jobs, which would exacerbate the acute shortage of nurses in Uganda. This study provides important knowledge for guiding clinical practice and nursing education in resource-constrained countries like Uganda.

Near infrared (NIR) spectroscopy for in-line monitoring of polymer extrusion processes.

PubMed

Rohe, T; Becker, W; Kölle, S; Eisenreich, N; Eyerer, P

1999-09-13

In recent years, near infrared (NIR) spectroscopy has become an analytical tool frequently used in many chemical production processes. In particular, on-line measurements are of interest to increase process stability and to document constant product quality. Application to polymer processing e.g. polymer extrusion, could even increase product quality. Interesting parameters are composition of the processed polymer, moisture, or reaction status in reactive extrusion. For this issue a transmission sensor was developed for application of NIR spectroscopy to extrusion processes. This sensor includes fibre optic probes and a measuring cell to be adapted to various extruders for in-line measurements. In contrast to infrared sensors, it only uses optical quartz components. Extrusion processes at temperatures up to 300 degrees C and pressures up to 37 MPa have been investigated. Application of multivariate data analysis (e.g. partial least squares, PLS) demonstrated the performance of the system with respect to process monitoring: in the case of polymer blending, deviations between predicted and actual polymer composition were quite low (in the range of +/-0.25%). So the complete system is suitable for harsh industrial environments and could lead to improved polymer extrusion processes.

Modification of the anisotropy and strength differential effect of extruded AZ31 by extrusion-shear

NASA Astrophysics Data System (ADS)

Jaehnke, M.; Gensch, F.; Mueller, S.

2018-05-01

The extrusion of magnesium alloys results in a pronounced fiber texture in which the basal planes are mostly oriented parallel and the c-axes are oriented perpendicular to the extrusion direction. Due to this texture the Strength Differential Effect (SDE), which describes the strength difference between tensile and compression yield strength, and the elastic anisotropy in the sheet plane are obtained during extrusion. The objective of the investigation was to decrease the SDE and anisotropy through specifically influencing the microstructure and texture. To accomplish this objective, the forming processes extrusion (EX) and equal channel angular pressing (ECAP) were combined and integrated into one extrusion die. This combination is called extrusion-shear (ES). With an ES-die, billets of the magnesium alloy AZ31B were formed into a sheet with the thickness of 4 mm and the width of 70 mm. The angles of the used ECAP-applications in the ES-dies were set to 90° and 135°. The results show that the extrusion-shear process is able to decrease the anisotropy and SDE through transformation of the texture compared to conventional extrusion process. Also grain refinement could be observed. However, the outcomes seem to be very sensitive to the process parameters. Only by using the ES-die with an angle of 135° the desired effect could be accomplished.

Isolated Case of Marburg Virus Disease, Kampala, Uganda, 2014.

PubMed

Nyakarahuka, Luke; Ojwang, Joseph; Tumusiime, Alex; Balinandi, Stephen; Whitmer, Shannon; Kyazze, Simon; Kasozi, Sam; Wetaka, Milton; Makumbi, Issa; Dahlke, Melissa; Borchert, Jeff; Lutwama, Julius; Ströher, Ute; Rollin, Pierre E; Nichol, Stuart T; Shoemaker, Trevor R

2017-06-01

In September 2014, a single fatal case of Marburg virus was identified in a healthcare worker in Kampala, Uganda. The source of infection was not identified, and no secondary cases were identified. We describe the rapid identification, laboratory diagnosis, and case investigation of the third Marburg virus outbreak in Uganda.

Silicate and Carbonatite Melts in the Mantle: Adding CO2 to the pMELTS Thermodynamic Model of Silicate Phase Equilibria

NASA Astrophysics Data System (ADS)

Antoshechkina, P. M.; Shorttle, O.

2016-12-01

The current rhyolite-MELTS algorithm includes a mixed H2O-CO2 vapor phase, and a self-consistent speciation model for CO2 and CaCO3 in the silicate liquid (Ghiorso & Gualda 2012; 2015). Although intended primarily to model crustal differentiation and degassing, GG15 captures much of the experimentally-observed melting behavior of CO2-rich mafic lithologies, including generation of small-degree carbonatite melts, a miscibility gap between carbonatite and silicate liquids at low P and a smooth transition to a single carbonated-silicate melt at high P (e.g. Dasgupta et al. 2007). However, solid and liquid carbonate phases were not used in calibration of GG15, and it is suitable only for P < 3 GPa. We present a preliminary model, based on pMELTS (Ghiorso et al. 2002), for melting of nominally-anhydrous carbonated peridotite and pyroxenite. In Antoshechkina et al. (2015; and references therein) we developed a scheme for calibration of molar volumes that directly interfaces with a MySQL database, adapted from LEPR (Hirschmann et al. 2008). Here, we further extend our database, e.g. to include multiple carbonate phases, and combine the calibration scheme with the libalphaMELTS interface to the rhyolite-MELTS, pMELTS, and H2O-CO2 fluid thermodynamic models (see magmasource.caltech.edu/alphamelts). We use a Monte-Carlo type calibration approach to fit the observed phases and compositions, though stop short of a fully Bayesian formulation. The CO2-fluid experimental database has been updated to include more recent and higher P studies, adding approximately 40 pure fluid plus liquid constraints that conform to the selection criteria used in GG15. To further expand the database, we plan to use some or all of: solid carbonate-bearing experiments; coexisting silicate and carbonatite liquids; phase-present, and phase-absent constraints. As a first approximation, we include four carbonate phases: pure calcite and aragonite, and binary solutions for dolomite-ankerite and magnesite

Physico-chemical properties and extrusion behaviour of selected common bean varieties.

PubMed

Natabirwa, Hedwig; Muyonga, John H; Nakimbugwe, Dorothy; Lungaho, Mercy

2018-03-01

Extrusion processing offers the possibility of processing common beans industrially into highly nutritious and functional products. However, there is limited information on properties of extrudates from different bean varieties and their association with raw material characteristics and extrusion conditions. In this study, physico-chemical properties of raw and extruded Bishaz, K131, NABE19, Roba1 and RWR2245 common beans were determined. The relationships between bean characteristics and extrusion conditions on the extrudate properties were analysed. Extrudate physico-chemical and pasting properties varied significantly (P < 0.05) among bean varieties. Expansion ratio and water solubility decreased, while bulk density, water absorption, peak and breakdown viscosities increased as feed moisture increased. Protein exhibited significant positive correlation (P < 0.05) with water solubility index, and negative correlations (P < 0.05) with water absorption, bulk density and pasting viscosities. Iron and dietary fibre showed positive correlation while total ash exhibited negative correlation with peak viscosity, final viscosity and setback. Similar trends were observed in principal component analysis. Extrudate physico-chemical properties were found to be associated with beans protein, starch, iron, zinc and fibre contents. Therefore, bean chemical composition may serve as an indicator for beans extrusion behaviour and could be useful in selection of beans for extrusion. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Past, Present, and Future of Neurosurgery in Uganda.

PubMed

Haglund, Michael M; Warf, Benjamin; Fuller, Anthony; Freischlag, Kyle; Muhumuza, Michael; Ssenyonjo, Hussein; Mukasa, John; Mugamba, John; Kiryabwire, Joel

2017-04-01

Neurosurgery in Uganda was virtually non-existent up until late 1960s. This changed when Dr. Jovan Kiryabwire spearheaded development of a neurosurgical unit at Mulago Hospital in Kampala. His work ethic and vision set the stage for rapid expansion of neurosurgical care in Uganda.At the beginning of the 2000s, Uganda was a country of nearly 30 million people, but had only 4 neurosurgeons. Neurosurgery's progress was plagued by challenges faced by many developing countries, such as difficulty retaining specialists, lack of modern hospital resources, and scarce training facilities. To combat these challenges 2 distinct programs were launched: 1 by Dr. Benjamin Warf in collaboration with CURE International, and the other by Dr. Michael Haglund from Duke University. Dr. Warf's program focused on establishing a facility for pediatric neurosurgery. Dr. Haglund's program to increase neurosurgical capacity was founded on a "4 T's Paradigm": Technology, Twinning, Training, and Top-Down. Embedded within this paradigm was the notion that Uganda needed to train its own people to become neurosurgeons, and thus Duke helped establish the country's first neurosurgery residency training program.Efforts from overseas, including the tireless work of Dr. Benjamin Warf, have saved thousands of children's lives. The influx of the Duke Program caused a dynamic shift at Mulago Hospital with dramatic effects, as evidenced by the substantial increase in neurosurgical capacity. The future looks bright for neurosurgery in Uganda and it all traces back to a rural village where 1 man had a vision to help the people of his country. Copyright © 2017 by the Congress of Neurological Surgeons.

Predominance of Uganda genotype of Mycobacterium tuberculosis isolated from Ugandan patients with tuberculous lymphadenitis.

PubMed

Wamala, Dan; Okee, Moses; Kigozi, Edgar; Couvin, David; Rastogi, Nalin; Joloba, Moses; Kallenius, Gunilla

2015-09-01

In Uganda, the emerging Uganda genotype of Mycobacterium tuberculosis is the most common cause of pulmonary tuberculosis (PTB), and accounts for up to 70% of isolates. Extrapulmonary TB (EPTB) is less studied in Uganda. Molecular characterization using deletion analysis and spoligotyping was performed on 121 M. tuberculosis isolates from lymph node fine needle biopsy aspirates of Ugandan patients with tuberculous lymphadenitis. The evolutionary relationships and worldwide distribution of the spoligotypes were analyzed. Mycobacterium tuberculosis was the only cause of EPTB in this study. The T2 sublineage was the most predominant lineage and the Uganda genotype was the dominant genotype. There were 54 spoligotype patterns among the 121 study isolates. The dominant spoligotypes were shared international types (SIT) SIT420, SIT53, SIT 135, SIT 128 and SIT590 in descending order. All but SIT420 were previously reported in pulmonary TB in this setting. The phylogenetic analysis showed a long descendant branch of spoligotypes belonging to the T2-Uganda sublineage containing specifically SITs 135, 128 and 420. In most cases, the spoligotypes were similar to those causing PTB, but the Uganda genotype was found to be less common in EPTB than previously reported for PTB in Uganda. The phylogenetic analysis and the study of the worldwide distribution of clustered spoligotypes indicate an ongoing evolution of the Uganda genotype, with the country of Uganda at the center of this evolution.

Uganda: Current Conditions and the Crisis in North Uganda

DTIC Science & Technology

2010-10-06

African Union , and the United States condemned the terrorist attacks. More than 20 suspects are currently in prison. Uganda: Current Conditions...The United Nations, the African Union , and the United States condemned the terrorist attacks. More than 20 suspects are currently in prison. The...attacks took place at a rugby club and Ethiopian restaurant while people were watching the final match of the World Cup. The following day, an Al

Uganda: Current Conditions and the Crisis in North Uganda

DTIC Science & Technology

2011-04-29

United Nations, the African Union , and the United States condemned the terrorist attacks. More than 20 suspects are currently in prison. Uganda: Current...concerns. The African Union stated that the elections were peaceful and transparent, but called for a Review of the Electoral Law. Opposition groups...Nations, the African Union , and the United States condemned the terrorist attacks. More than 20 suspects are currently in prison. The attacks took place

Uganda: Current Conditions and the Crisis in North Uganda

DTIC Science & Technology

2010-12-09

Nations, the African Union , and the United States condemned the terrorist attacks. More than 20 suspects are currently in prison. Uganda: Current...An estimated 76 people, including one American, were killed and more than 80 injured. The United Nations, the African Union , and the United States...condemned the terrorist attacks. More than 20 suspects are currently in prison. The attacks took place at a rugby club and Ethiopian restaurant while

Uganda: Current Conditions and the Crisis in North Uganda

DTIC Science & Technology

2010-07-30

Union , and the United States condemned the terrorist attacks. More than 20 suspects are currently in prison. Uganda: Current Conditions and the...than 80 injured. The United Nations, the African Union , and the United States condemned the terrorist attacks. More than 20 suspects are currently in...prison. The attacks took place at a rugby club and Ethiopian restaurant while people were watching the final match of the World Cup. The following

Extrusion cycles of dome-forming eruptions

NASA Astrophysics Data System (ADS)

de'Michieli Vitturi, M.; Clarke, A. B.; Neri, A.; Voight, B.

2010-12-01

We investigated the dynamics of magma ascent along a dome-forming conduit coupled with the formation and extrusion of a degassed plug at the top by a two-phase flow model. We treated the magma mixture as a liquid continuum with dispersed gas bubbles and crystals in thermodynamic equilibrium with the melt. A modified Poiseulle form of the viscous term for fully developed laminar flow in an elliptic conduit was assumed. During ascent, magma pressure decreases and water vapor exsolves and partially degasses from the melt as the melt simultaneously crystallizes, causing changes in mixture density and viscosity, which may eventually lead to the formation of a degassed plug sealing the conduit. The numerical model DOMEFLOW (de’ Michieli Vitturi et al., EPSL 2010) has been applied to dome-building eruptions using conditions approximately appropriate for the Soufrière Hills volcano, Montserrat, which has led to a better understanding of the role of a plug on eruption periodicity. Two mechanisms, which have been proposed to cause periodicity, have been implemented in the model and their corresponding timescales explored. The first test applies a stick-slip model in which the plug is considered as solid and static/dynamic friction, as described in Iverson et al. [Nature 2006, 444, 439-43], replaces the viscous forces in the momentum equation. This mechanism yields cycle timescales of seconds to tens of seconds with values generally depending on assumed friction coefficients. Although not all constants and parameters have been explored for this model, we suggest that a stick-slip mechanism of this type cannot explain the cycles of extrusion and explosion typically observed at Montserrat (timescales of hours). The second mechanism does not consider friction but allows enhanced permeable gas loss in the shallow conduit, possibly due to connected porosity or micro- or macro-scale fractures. Enhanced permeable gas loss may lead to formation of a dense and rheologically

Corrosion anisotropy of titanium deformed by the hydrostatic extrusion

NASA Astrophysics Data System (ADS)

Chojnacka, A.; Kawalko, J.; Koscielny, H.; Guspiel, J.; Drewienkiewicz, A.; Bieda, M.; Pachla, W.; Kulczyk, M.; Sztwiertnia, K.; Beltowska-Lehman, E.

2017-12-01

The corrosion behaviour of titanium rods deformed by hydrostatic extrusion (HE) in artificial saliva (Carter-Brugirard's solution of pH 7.6) was investigated using open-circuit potentials (OCPs), (DC) potentiodynamic polarisation curves and (AC) electrochemical impedance spectroscopy (EIS) techniques. Various electrochemical parameters (corrosion potential Ecorr, corrosion current (icorr), polarisation resistance Rp, charge transfer resistance Rct and oxide film resistance Rf) were analysed. Significant coherence was observed between results achieved from these procedures, i.e., all applied techniques showed the same trend for corrosion resistance. The obtained electrochemical data were then related to the microstructure parameters (crystallographic texture, grain size, grain boundary distribution and density) determined using the EBSD/SEM technique. It was found that the corrosion behaviour of titanium processed by the HE method was superior compared to the unprocessed Ti, and this was clearly dependent on the extrusion direction. The highest corrosion resistance was revealed for the HE-deformed Ti rod of the surface oriented longitudinal (parallel) to the extrusion direction.

Laramie in Uganda

ERIC Educational Resources Information Center

Kagan, Eve

2011-01-01

No matter how disturbing, it is common to hear "that's so gay" or "you're such a fag" echoing through the halls of a high school, but when the high school is an international school in Uganda, those words have a newfound potency. As an American teacher working abroad, the author often struggled over her responsibility for the…

VIEW OF THE INSTALLATION OF AN EXTRUSION PRESS IN THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF THE INSTALLATION OF AN EXTRUSION PRESS IN THE HIGH BAY AREA OF BUILDING 865. THE EXTRUSION PRESS WAS USED TO PRODUCE CYLINDRICAL BARS, HOLLOW TUBES, AND SHAPES WITH IRREGULAR CROSS-SECTIONS BY FORCING PREHEATED METAL THROUGH A DIE ORIFICE UNDER HIGH PRESSURE. (5/22/70) - Rocky Flats Plant, Metal Research & Development Laboratory, South of Central Avenue at south end of terminus of Ninth Avenue, Golden, Jefferson County, CO

Sleeping sickness in Uganda: revisiting current and historical distributions.

PubMed

Berrang-Ford, Lea; Odiit, Martin; Maiso, Faustin; Waltner-Toews, David; McDermott, John

2006-12-01

Sleeping sickness is a parasitic, vector-borne disease, carried by the tsetse fly and prevalent in sub-Saharan Africa. The disease continues to pose a public health burden in Uganda, which experienced a widespread outbreak in 1900-1920, and a more recent outbreak in 1976-1989. The disease continues to spread to uninfected districts. This paper compares the spatial distributions of sleeping in Uganda for the 1900-1920 outbreak period with current disease foci, and discusses information gaps and implications arising for future research, prevention and control. Population census records for 1911 and sleeping sickness records from Medical and Sanitary Reports of the Ugandan Protectorate for 1905-1936 were extracted from the Uganda Archives. Current sleeping sickness distribution data were provided by the Ministry of Health, Uganda. These were used to develop sleeping sickness distribution maps for comparison between the early 1900s and the early 2000s. The distribution of sleeping sickness from 1905-1920 shows notable differences compared to the current distribution of disease. In particular, archival cases were recorded in south-west and central Uganda, areas currently free of disease. The disease focus has moved from lakeshore Buganda (1905-1920) to the Busoga and south-east districts. Archival sleeping sickness distributions indicate the potential for a much wider area of disease risk than indicated by current disease foci. This is compounded by an absence of tsetse distribution data, continued political instability in north-central Uganda, continued spread of disease into new districts, and evidence of the role of livestock movements in spreading the parasite. These results support concerns as to the potential mergence of the two disease foci in the south-east and north-west of the country.

Numerical investigations on the lateral angular co-extrusion of aluminium and steel

NASA Astrophysics Data System (ADS)

Behrens, B.-A.; Klose, C.; Chugreev, A.; Thürer, S. E.; Uhe, J.

2018-05-01

In order to save weight and costs, different materials can be combined within one component. In the novel process chain being developed within the Collaborative Research Centre (CRC) 1153, joined semi-finished workpieces are used to produce hybrid solid components with locally adapted properties. Different materials are joined in an initial step before the forming process takes place. Hereby, the quality of the joining zone is improved by means of the thermo-mechanical treatment during the forming and machining processes. The lateral angular co-extrusion (LACE) approach is used to produce semi-finished workpieces because it allows for the production of coaxial semi-finished products consisting of aluminium and steel. In the further process chain, these semi-finished products are processed into hybrid bearing bushings with locally adapted properties by die forging. In the scope of this work, numerical investigations of the co-extrusion of aluminium-steel compounds were carried out using finite element (FE) simulation in order to examine the influence of the process parameters on the co-extrusion process. For this purpose, the relevant material properties of the aluminium alloy EN AW-6082 were determined experimentally and subsequently implemented in the numerical model. The obtained numerical model was used to study the impact of different ram speeds, press ratios and billet temperatures on the resulting extrusion forces and the material flow. The numerical results have been validated using force-time curves obtained from experimental extrusion tests carried out on a 2.5 MN laboratory extrusion press.

Quantitative analysis of mechanical force required for cell extrusion in zebrafish embryonic epithelia.

PubMed

Yamada, Sohei; Iino, Takanori; Bessho, Yasumasa; Hosokawa, Yoichiroh; Matsui, Takaaki

2017-10-15

When cells in epithelial sheets are damaged by intrinsic or extrinsic causes, they are eliminated by extrusion from the sheet. Cell extrusion, which is required for maintenance of tissue integrity, is the consequence of contraction of actomyosin rings, as demonstrated by both molecular/cellular biological experimentation and numerical simulation. However, quantitative evaluation of actomyosin contraction has not been performed because of the lack of a suitable direct measurement system. In this study, we developed a new method using a femtosecond laser to quantify the contraction force of the actomyosin ring during cell extrusion in zebrafish embryonic epithelia. In this system, an epithelial cell in zebrafish embryo is first damaged by direct femtosecond laser irradiation. Next, a femtosecond laser-induced impulsive force is loaded onto the actomyosin ring, and the contraction force is quantified to be on the order of kPa as a unit of pressure. We found that cell extrusion was delayed when the contraction force was slightly attenuated, suggesting that a relatively small force is sufficient to drive cell extrusion. Thus, our method is suitable for the relative quantitative evaluation of mechanical dynamics in the process of cell extrusion, and in principle the method is applicable to similar phenomena in different tissues and organs of various species. © 2017. Published by The Company of Biologists Ltd.

Optical Measurement Technology For Aluminium Extrusions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Per Thomas; Willa-Hansen, Arnfinn; Stoeren, Sigurd

2007-04-07

Optical measurement techniques such as laser scanning, structured light scanning and photogrammetry can be used for accurate shape control for aluminum extrusion and downstream processes. The paper presents the fundamentals of optical shape measurement. Furthermore, it focuses on how full-field in- and off-line shape measurement during pure-bending of aluminum extrusions has been performed with stripe projection (structured light) using white light. Full field shape measurement is difficult to implement industrially, but is very useful as a laboratory tool. For example, it has been clearly shown how moderate internal air pressure (less than 5 bars) can significantly reduce undesirable cross-sectional shapemore » distortions during pure bending, and how buckling of the compressive flange occurs at an early stage. Finally, a stretch-bending set-up with adaptive shape control using internal gas pressure and optical techniques is presented.« less

Providing plastic zone extrusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manchiraju, Venkata Kiran; Feng, Zhili; David, Stan A.

Plastic zone extrusion may be provided. First, a compressor may generate frictional heat in stock to place the stock in a plastic zone of the stock. Then, a conveyer may receive the stock in its plastic zone from the compressor and transport the stock in its plastic zone from the compressor. Next, a die may receive the stock in its plastic zone from the conveyer and extrude the stock to form a wire.

Analog Modeling of the Interplay between Subduction and Lateral Extrusion in the European Alps

NASA Astrophysics Data System (ADS)

van Gelder, I. E.; Willingshofer, E.; Sokoutis, D.

2014-12-01

In the European Alps lateral extrusion is traditionally viewed as a lithospheric scale process that is related to northward indentation of a weak orogenic wedge (the eastern Alps) by a rigid indenter in upper plate position (the Adriatic plate). Critical for the efficiency of the extrusion process is the presence of a 'free boundary' at high angle to the indentation direction. The 'free boundary' in the eastern Alps is the result of the eastward extending Pannonian realm synchronous to indentation. However, indentation has become debatable as recent high-resolution tomography suggests that the Adriatic mantle lithosphere subducted under the extruding Alps. These findings raise first order questions related to: (a) the partitioning of deformation between lateral extrusion of the upper plate and coeval subduction of Adria, (b) the rheology of the lower and upper plates, and (c) the rheology of the plate contact controlling the amount of extrusion on the upper plate vs. accretion on the lower plate.In this analog modeling study, we couple for the first time lateral extrusion tectonics to subduction of the lower plate; thus, extrusion taking place in the upper plate. Within the lithospheric scale models, the lithospheres of the two plates are weakly coupled along an inclined boundary and have contrasting mantle lithosphere strength (stronger in the subducting plate). The interplay of extrusion vs subduction is inferred by varying the mechanical boundary conditions, e.g. the degree of resistance at the 'unconstrained' margin, the strength contrast between the upper and the lower plates and the width of the indented region.The experimental results emphasize that extrusion in the eastern Alps is compatible with coeval subduction of the Adriatic plate. The first experimental series suggests that the following mechanical conditions play a key role in the interplay between extrusion and subduction: (a) the extruding plate is weaker than the subducting plate, (b) the plate

Pharmaceutical approaches to preparing pelletized dosage forms using the extrusion-spheronization process.

PubMed

Trivedi, Namrata R; Rajan, Maria Gerald; Johnson, James R; Shukla, Atul J

2007-01-01

Pelletized dosage forms date back to the 1950s, when the first product was introduced to the market. Since then, these dosage forms have gained considerable popularity because of their distinct advantages, such as ease of capsule filling because of better flow properties of the spherical pellets; enhancement of drug dissolution; ease of coating; sustained, controlled, or site-specific delivery of the drug from coated pellets; uniform packing; even distribution in the GI tract; and less GI irritation. Pelletized dosage forms can be prepared by a number of techniques, including drug layering on nonpareil sugar or microcrystalline cellulose beads, spray drying, spray congealing, rotogranulation, hot-melt extrusion, and spheronization of low melting materials or extrusion-spheronization of a wet mass. This review discusses recent developments in the pharmaceutical approaches that have been used to prepare pelletized dosage forms using the extrusion-spheronization process over the last decade. The review is divided into three parts: the first part discusses the extrusion-spheronization process, the second part discusses the effect of varying formulation and process parameters on the properties of the pellets, and the last part discusses the different approaches that have been used to prepare pelletized dosage forms using the extrusion-spheronization process.

Cervical artificial disc extrusion after a paragliding accident.

PubMed

Niu, Tianyi; Hoffman, Haydn; Lu, Daniel C

2017-01-01

Cervical total disc replacement (TDR) is an established alternative to anterior cervical discectomy and fusion (ACDF) with excellent long-term outcomes and low failure rates. Cases of implant failure and migration are scarce and primarily limited to several years postoperatively. The authors report a case of anterior extrusion of a C4-C5 ProDisc-C (DePuy Synthes, West Chester, PA, USA) cervical artificial disc (CAD) 14 months after placement due to minor trauma. A 33-year-old female who had undergone C4-C5 CAD implantation presented with neck pain and spasm after experiencing a paragliding accident. A 4 mm anterior protrusion of the CAD was seen on x-ray. She underwent removal of the CAD followed by anterior fusion. Other cases of CAD extrusion in the literature are discussed and the device's durability and testing are considered. Overall, CAD extrusion is a rare event. This case is likely the result of insufficient osseous integration. Patients undergoing cervical TDR should avoid high-risk activities to prevent trauma that could compromise the disc's placement, and future design/research should focus on how to enhance osseous integration at the interface while minimizing excessive heterotopic ossification.

Extrusion-mixing compared with hand-mixing of polyether impression materials?

PubMed

McMahon, Caroline; Kinsella, Daniel; Fleming, Garry J P

2010-12-01

The hypotheses tested were two-fold (a) whether altering the base:catalyst ratio influences working time, elastic recovery and strain in compression properties of a hand-mixed polyether impression material and (b) whether an extrusion-mixed polyether impression material would have a significant advantage over a hand-mixed polyether impression material mixed to the optimum base:catalyst ratio. The polyether was hand-mixed at the optimum (manufacturers recommended) base:catalyst ratios (7:1) and further groups were made by increasing or decreasing the catalyst length by 25%. Additionally specimens were also made from an extrusion-mixed polyether impression material and compared with the optimum hand-mixed base:catalyst ratio. A penetrometer assembly was used to measure the working time (n=5). Five cylindrical specimens for each hand-mixed and extrusion mixed group investigated were employed for elastic recovery and strain in compression testing. Hand-mixing polyether impression materials with 25% more catalyst than that recommended significantly decreased the working time while hand-mixing with 25% less catalyst than that recommended significantly increased the strain in compression. The extrusion-mixed polyether impression material provided similar working time, elastic recovery and strain in compression to the hand-mixed polyether mixed at the optimum base:catalyst ratio.

Process monitoring and visualization solutions for hot-melt extrusion: a review.

PubMed

Saerens, Lien; Vervaet, Chris; Remon, Jean Paul; De Beer, Thomas

2014-02-01

Hot-melt extrusion (HME) is applied as a continuous pharmaceutical manufacturing process for the production of a variety of dosage forms and formulations. To ensure the continuity of this process, the quality of the extrudates must be assessed continuously during manufacturing. The objective of this review is to provide an overview and evaluation of the available process analytical techniques which can be applied in hot-melt extrusion. Pharmaceutical extruders are equipped with traditional (univariate) process monitoring tools, observing barrel and die temperatures, throughput, screw speed, torque, drive amperage, melt pressure and melt temperature. The relevance of several spectroscopic process analytical techniques for monitoring and control of pharmaceutical HME has been explored recently. Nevertheless, many other sensors visualizing HME and measuring diverse critical product and process parameters with potential use in pharmaceutical extrusion are available, and were thoroughly studied in polymer extrusion. The implementation of process analytical tools in HME serves two purposes: (1) improving process understanding by monitoring and visualizing the material behaviour and (2) monitoring and analysing critical product and process parameters for process control, allowing to maintain a desired process state and guaranteeing the quality of the end product. This review is the first to provide an evaluation of the process analytical tools applied for pharmaceutical HME monitoring and control, and discusses techniques that have been used in polymer extrusion having potential for monitoring and control of pharmaceutical HME. © 2013 Royal Pharmaceutical Society.

Effect of banana flour, screw speed and temperature on extrusion behaviour of corn extrudates.

PubMed

Kaur, Amritpal; Kaur, Seeratpreet; Singh, Mrinal; Singh, Narpinder; Shevkani, Khetan; Singh, Baljit

2015-07-01

Effect of extrusion parameters (banana flour, screw speed, extrusion temperature) on extrusion behaviour of corn grit extrudates were studied. Second order quadratic equations for extrusion properties as function of banana flour (BF), screwspeed (SS) and extrusion temperature (ET) were computed. BF had predominant effect on the Hunter color (L*, a*, b*) parameters of the extrudates. Addition of BF resulted in corn extrudates with higher L* and lower a* and b* values. Higher ET resulted in dark colored extrudates with lower L* and a* value. Higher SS enhanced the lightness of the extrudates. Expansion of the extrudates increased with increase in the level of BF and ET. WAI of the extrudates decreased with BF whereas increased with SS. However, reversed effect of BF and SS on WSI was observed. Flextural strength of the extrudates increased with increase in SS followed by BF and ET. The addition of BF and higher ET resulted in extrudates with higher oil uptake.

Lateral Meniscal Allograft Transplant via a Medial Approach Leads to Less Extrusion.

PubMed

Choi, Nam-Hong; Choi, Jeong-Ki; Yang, Bong-Seok; Lee, Doe-Hyun; Victoroff, Brian N

2017-10-01

Accurate positioning of the bony bridge is crucial to prevent extrusion of meniscal allografts after transplant. However, oblique or lateralized placement of the bony bridge of the lateral meniscal allograft may occur due to technical error or a limited visual field. The patellar tendon may be an obstacle to approaching the anterior horn of the lateral meniscus, resulting in a laterally placed allograft. Therefore, lateral meniscal transplant through a medial arthrotomy would be an alternative approach. However, no report exists regarding allograft extrusion when comparing medial and lateral arthrotomy techniques in lateral meniscal transplants. Extrusion of the midbody of the allograft is less severe and the rotation of the bony bridge is less oblique in lateral meniscal allograft transplants through the medial parapatellar approach than those through the lateral approach. Cohort study; Level of evidence, 3. A bony bridge was used to perform 55 lateral meniscal transplants through either a medial or a lateral arthrotomy. Thirty-two allografts were transplanted through a medial arthrotomy and 23 were transplanted through a lateral arthrotomy, not randomly. Because correct positioning of the bony trough through the medial arthrotomy was easier than that through the lateral arthrotomy, the method of the arthrotomy was changed for the latter. The procedure for both groups was identical except for the arthrotomy technique, and rehabilitation was identical for both groups. Follow-up magnetic resonance imaging was conducted for all patients to measure the postoperative extrusion and obliquity of the bony bridge of the allograft. On the coronal view, extrusion was measured as the distance between the outer edge of the articular cartilage of the lateral tibial plateau and the outer edge of the meniscal allograft. On the axial view, a line (line B) was drawn along the longitudinal axis of the bony bridge. The posterior tibial condylar tangential line was drawn between the

75 FR 34982 - Aluminum Extrusions from the People's Republic of China: Notice of Postponement of Preliminary...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... DEPARTMENT OF COMMERCE International Trade Administration [C-570-968] Aluminum Extrusions from the... in the Federal Register a notice of initiation of the countervailing duty investigation of aluminum extrusions from the People's Republic of China. See Aluminum Extrusions From the People's Republic of China...

Extrusion & Compoundierung

NASA Astrophysics Data System (ADS)

Collin, Heinz; Schulze, Verena

Unter Extrusion wird das kontinuierliche Fördern von formbaren Massen verstanden. Dies können Kunststoffe, Teigwaren in der Lebensmittelindustrie oder auch keramische Massen sein. In der chemischen Industrie werden ebenfalls hochviskose (schwerfließende) Stoffe oder Pasten dosiert, gefördert und extrudiert. Früher waren vorzugsweise Kolbenstrangpressen im Einsatz, bis sich ab 1950 in steigendem Maße die Schneckenmaschinen durchgesetzt haben. Der weltweite Siegeszug der Kunststoffe ist zu einem erheblichen Teil auf die stetige technologische Weiterentwicklung im Bereich der Extrusionstechnik zurückzuführen. Der Markt der weltweit produzierten Maschinen für die Kunststoffverarbeitung erreichte im Jahr 2006 einen Wert von 20 Milliarden Euro und somit zählt dieser Bereich mittlerweile zu einem der großen Industriezweige [1].

Uganda: The Challenge of Growth and Poverty Reduction. A World Bank Country Study.

ERIC Educational Resources Information Center

World Bank, Washington, DC.

This report examines the outcomes of economic reform in Uganda and defines issues that Uganda must address in medium- and long-term strategies for poverty reduction. With a per capita income of approximately $220, Uganda is one of the poorest countries in the world. Its economy and social indicators bear the marks of nearly 15 years of political…

Processing thermally labile drugs by hot-melt extrusion: The lesson with gliclazide.

PubMed

Huang, Siyuan; O'Donnell, Kevin P; Delpon de Vaux, Sophie M; O'Brien, John; Stutzman, John; Williams, Robert O

2017-10-01

The formation of molecularly dispersed amorphous solid dispersions by the hot-melt extrusion technique relies on the thermal and mechanical energy inputs, which can cause chemical degradation of drugs and polymeric carriers. Additionally, drug degradation may be exacerbated as drugs convert from a more stable crystalline form to a higher energy amorphous form. Therefore, it is imperative to study how drug degrades and evaluate methods to minimize drug degradation during the extrusion process. In this work, gliclazide was used as a model thermally labile drug for the degradation kinetics and process optimization studies. Preformulation studies were conducted using thermal analyses, and liquid chromatography-mass spectroscopy to identify drug degradation pathways and to determine initial extrusion conditions. Formulations containing 10% drug and 90% AFFINISOL™ HPMC HME 100LV were then extruded using a twin screw extruder, and the extrudates were characterized using X-ray powder diffraction, modulated dynamic scanning calorimetry, and potency testing to evaluate physicochemical properties. The energies of activation for both amorphous gliclazide, crystalline gliclazide, and gliclazide solution were calculated using the Arrhenius equation to further guide the extrusion optimization process. Preformulation studies identify two hydrolysis degradation pathways of gliclazide at elevated temperatures. The activation energy study indicates a significantly higher degradation rate for the amorphous gliclazide compared to the crystalline form. After optimization of the hot-melt extrusion process, including improved screw designs, machine setup, and processing conditions, gliclazide amorphous solid dispersion with ∼95% drug recovery was achieved. The ability to process thermally labile drugs and polymers using hot-melt extrusion will significantly expand the possible applications of this manufacturing process. Copyright © 2017 Elsevier B.V. All rights reserved.

Osmotic mechanism of the loop extrusion process

NASA Astrophysics Data System (ADS)

Yamamoto, Tetsuya; Schiessel, Helmut

2017-09-01

The loop extrusion theory assumes that protein factors, such as cohesin rings, act as molecular motors that extrude chromatin loops. However, recent single molecule experiments have shown that cohesin does not show motor activity. To predict the physical mechanism involved in loop extrusion, we here theoretically analyze the dynamics of cohesin rings on a loop, where a cohesin loader is in the middle and unloaders at the ends. Cohesin monomers bind to the loader rather frequently and cohesin dimers bind to this site only occasionally. Our theory predicts that a cohesin dimer extrudes loops by the osmotic pressure of cohesin monomers on the chromatin fiber between the two connected rings. With this mechanism, the frequency of the interactions between chromatin segments depends on the loading and unloading rates of dimers at the corresponding sites.

Apical extrusion of debris in four different endodontic instrumentation systems: A meta-analysis.

PubMed

Western, J Sylvia; Dicksit, Daniel Devaprakash

2017-01-01

All endodontic instrumentation systems tested so far, promote apical extrusion of debris, which is one of the main causes of postoperative pain, flare ups, and delayed healing. Of this meta-analysis was to collect and analyze in vitro studies quantifying apically extruded debris while using Hand ProTaper (manual), ProTaper Universal (rotary), Wave One (reciprocating), and self-adjusting file (SAF; vibratory) endodontic instrumentation systems and to determine methods which produced lesser extrusion of debris apically. An extensive electronic database search was done in PubMed, Scopus, Cochrane, LILACS, and Google Scholar from inception until February 2016 using the key terms "Apical Debris Extrusion, extruded material, and manual/rotary/reciprocating/SAF systems." A systematic search strategy was followed to extract 12 potential articles from a total of 1352 articles. The overall effect size was calculated from the raw mean difference of weight of apically extruded debris. Statistically significant difference was seen in the following comparisons: SAF < Wave One, SAF < Rotary ProTaper. Apical extrusion of debris was invariably present in all the instrumentation systems analyzed. SAF system seemed to be periapical tissue friendly as it caused reduced apical extrusion compared to Rotary ProTaper and Wave One.

The FEM simulation of continuous rotary extrusion (CRE) of aluminum alloy AA3003

NASA Astrophysics Data System (ADS)

Rajendran, Nijenthan; Valberg, Henry; Misiolek, Wojciech Z.

2017-10-01

Continuous Rotary Extrusion (CRE) process is also known in literature under Conform TM name and it is mainly used for the continuous extrusion of Aluminum and Copper alloys. CRE use a feedstock in the form of rod, powders and chips, which are fed into the groove of the rotating wheel. As the wheel rotates the feedstock moves along with it due to friction with the wheel. Once the feedstock reaches the abutment the material deforms plastically and it is extruded through the die. CRE has lot to offer when compared to other more conventional extrusion processes such as low energy input, no limit in billet length as it is a continuous process as well as improved material physical properties due to plastic deformation under constant parameters. In this work a FEM model has been developed using Deform TM 3D, to study the metal flow and state variables of AA3003 CRE extrusion. The effect of extrusion wheel velocity has been investigated. The results show that increase in wheel velocity will heat up the feedstock metal due to high shear deformation and higher friction, which significantly changes metal flow conditions at the die exit.

76 FR 80887 - Antidumping Order on Aluminum Extrusions from the People's Republic of China: Initiation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

..., participated in the antidumping duty investigation of aluminum extrusions from the PRC. The Department issued its final determination for this investigation on April 4, 2011. See Aluminum Extrusions From the..., customers, suppliers, etc. Scope of the Order The merchandise covered by the order is aluminum extrusions...

Effects of pelleting, extrusion, or extrusion and pelleting on energy and nutrient digestibility in diets containing different levels of fiber and fed to growing pigs.

PubMed

Rojas, O J; Vinyeta, E; Stein, H H

2016-05-01

An experiment was conducted to determine effects of pelleting, extrusion, and extrusion and pelleting on energy and nutrient digestibility in diets containing low, medium, or high concentrations of fiber. Three diets were formulated: 1) the low-fiber diet contained corn and soybean meal; 2) the medium-fiber diet contained corn, soybean meal, and 25% distillers dried grains with solubles (DDGS); and 3) the high-fiber diet contained corn, soybean meal, 25% DDGS, and 20% soybean hulls. Each diet was divided into 4 batches after mixing. One batch was not further processed and was fed in a meal form, one batch was pelleted at 85°C, one batch was extruded at 115°C using a single-screw extruder, and one batch was extruded at 115°C and then pelleted at 85°C. Thus, 12 different diets were produced. Twenty-four growing pigs (26.5 ± 1.5 kg initial BW) had a T-cannula installed in the distal ileum and were allotted to the 12 diets in a split-plot design with 8 pigs allotted to the low-fiber diets, the medium-fiber diets, and the high-fiber diets, respectively. Diets were fed to the pigs during four 14-d periods. Within each type of diet, the 8 pigs were fed the diets produced using the 4 processing technologies. Therefore, there were 8 replicate pigs per diet. Pigs were adjusted to their diets for 14 d before the experiment was initiated. Each of the four 14-d periods consisted of 5 d for adaptation, 5 d of fecal collection according to the marker to marker approach, and ileal digesta were collected on d 13 and 14. Results indicated that pelleting, extrusion, or extrusion and pelleting improved ( < 0.05) the apparent ileal digestibility of starch and most indispensable AA. In most cases, there were no differences between the pelleted, the extruded, and the extruded and pelleted diets. The apparent total tract digestibility of GE was also improved ( < 0.05) by pelleting and by the combination of extrusion and pelleting. The ME of pelleted diets was greater ( < 0.05) than

Reactive Extrusion of Zein with Glyoxal

USDA-ARS?s Scientific Manuscript database

Cross-linked zein has been produced using glyoxal as the cross-linking reagent via reactive extrusion for the first time in a twin screw extruder using dilute sodium hydroxide as catalyst. Tri(ethylene glycol) was used as a plasticizer for various items. The extrudate was then ground and processed...

Factors affecting irrigant extrusion during root canal irrigation: a systematic review.

PubMed

Boutsioukis, C; Psimma, Z; van der Sluis, L W M

2013-07-01

The aim of the present study was to conduct a systematic review and critical analysis of published data on irrigant extrusion to identify factors causing, affecting or predisposing to irrigant extrusion during root canal irrigation of human mature permanent teeth. An electronic search was conducted in Cochrane Library, LILACS, PubMed, SciELO, Scopus and Web of Knowledge using a combination of the terms 'irrigant', 'rinse', 'extrusion', 'injection', 'complication', 'accident', 'iatrogenic', 'root canal', 'tooth' and 'endodontic'. Additional studies were identified by hand-searching of six endodontic journals and the relevant chapters of four endodontic textbooks, resulting in a total of 460 titles. No language restriction was imposed. After applying screening and strict eligibility criteria by two independent reviewers, 40 case reports and 10 ex vivo studies were included in the review. A lack of clinical studies focusing on irrigant extrusion during root canal irrigation was evident. The reviewed case reports focused mainly on the clinical manifestations and management of the accidents and did not provide adequate details on the possible factors that may influence irrigant extrusion. The data from the included ex vivo studies were inconclusive due to major methodological limitations, such as not simulating the presence of periapical tissues and not assessing the validity of irrigant detection methods. The extensive variability in the protocols employed hindered quantitative synthesis. The choice of factors investigated in ex vivo studies seems not to have been driven by the available clinical evidence. These issues need to be addressed in future studies. © 2012 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Cost-effectiveness of rotavirus vaccination in Kenya and Uganda.

PubMed

Sigei, Charles; Odaga, John; Mvundura, Mercy; Madrid, Yvette; Clark, Andrew David

2015-05-07

Rotavirus vaccines have the potential to prevent a substantial amount of life-threatening gastroenteritis in young African children. This paper presents the results of prospective cost-effectiveness analyses for rotavirus vaccine introduction for Kenya and Uganda. In each country, a national consultant worked with a national technical working group to identify appropriate data and validate study results. Secondary data on demographics, disease burden, health utilization, and costs were used to populate the TRIVAC cost-effectiveness model. The baseline analysis assumed an initial vaccine price of $0.20 per dose, corresponding to Gavi, the Vaccine Alliance stipulated copay for low-income countries. The incremental cost-effectiveness of a 2-dose rotavirus vaccination schedule was evaluated for 20 successive birth cohorts from the government perspective in both countries, and from the societal perspective in Uganda. Between 2014 and 2033, rotavirus vaccination can avert approximately 60,935 and 216,454 undiscounted deaths and hospital admissions respectively in children under 5 years in Kenya. In Uganda, the respective number of undiscounted deaths and hospital admission averted is 70,236 and 329,779 between 2016 and 2035. Over the 20-year period, the discounted vaccine program costs are around US$ 80 million in Kenya and US$ 60 million in Uganda. Discounted government health service costs avoided are US$ 30 million in Kenya and US$ 10 million in Uganda (or US$ 18 million including household costs). The cost per disability-adjusted life-year (DALY) averted from a government perspective is US$ 38 in Kenya and US$ 34 in Uganda (US$ 29 from a societal perspective). Rotavirus vaccine introduction is highly cost-effective in both countries in a range of plausible 'what-if' scenarios. The involvement of national experts improves the quality of data used, is likely to increase acceptability of the results in decision-making, and can contribute to strengthened national

Cervical artificial disc extrusion after a paragliding accident

PubMed Central

Niu, Tianyi; Hoffman, Haydn; Lu, Daniel C.

2017-01-01

Background: Cervical total disc replacement (TDR) is an established alternative to anterior cervical discectomy and fusion (ACDF) with excellent long-term outcomes and low failure rates. Cases of implant failure and migration are scarce and primarily limited to several years postoperatively. The authors report a case of anterior extrusion of a C4-C5 ProDisc-C (DePuy Synthes, West Chester, PA, USA) cervical artificial disc (CAD) 14 months after placement due to minor trauma. Case Description: A 33-year-old female who had undergone C4-C5 CAD implantation presented with neck pain and spasm after experiencing a paragliding accident. A 4 mm anterior protrusion of the CAD was seen on x-ray. She underwent removal of the CAD followed by anterior fusion. Other cases of CAD extrusion in the literature are discussed and the device's durability and testing are considered. Conclusion: Overall, CAD extrusion is a rare event. This case is likely the result of insufficient osseous integration. Patients undergoing cervical TDR should avoid high-risk activities to prevent trauma that could compromise the disc's placement, and future design/research should focus on how to enhance osseous integration at the interface while minimizing excessive heterotopic ossification. PMID:28781915

Improved corn protein (zein) extrusion processing

USDA-ARS?s Scientific Manuscript database

Melt processing using a single and twin screw extruder has been carried out on zein where extrusion temperatures were varied between 100ºC and 300ºC. In addition, melt reprocessing (up to seven times) of zein was undertaken using a single screw extruder. Differential scanning calorimetry (DSC) and t...

Reduction of Fumonisin Toxicity by Extrusion and Nixtamalization (Alkaline Cooking).

PubMed

Voss, Kenneth; Ryu, Dojin; Jackson, Lauren; Riley, Ronald; Gelineau-van Waes, Janee

2017-08-23

Fumonisins are mycotoxins found in corn. They are toxic to animals and cause cancer in rodents and neural tube defects in LM/Bc mice. Reducing their concentrations in corn-based foods is therefore desirable. Chemical analysis or in vitro bioassays of food extracts might not detect toxic fumonisin reaction products that are unknown or unextractable from food matrices, thus potentially underestimating in vivo toxicity. The effectiveness of two common cooking methods, extrusion and nixtamalization (alkaline cooking), to reduce the toxicity of fumonisin-contaminated corn grits (extrusion) and whole kernel corn (nixtamalization) was shown by means of rat feeding bioassays using fumonisin-specific kidney effects as indicators of potential toxicity. A third bioassay showed that in contrast to fumonisin B 1 (FB 1 ), hydrolyzed fumonisin B 1 (HFB 1 ; formed from FB 1 during nixtamalization) did not cause neural tube defects in LM/Bc mice. The findings indicate that extrusion and nixtamalization reduce the potential toxicity of FB 1 -contaminated corn.

Development of poloxamer gel formulations via hot-melt extrusion technology.

PubMed

Mendonsa, Nicole S; Murthy, S Narasimha; Hashemnejad, Seyed Meysam; Kundu, Santanu; Zhang, Feng; Repka, Michael A

2018-02-15

Poloxamer gels are conventionally prepared by the "hot" or the "cold" process. But these techniques have some disadvantages such as high energy consumption, requires expensive equipment and often have scale up issues. Therefore, the objective of this work was to develop poloxamer gels by hot-melt extrusion technology. The model drug selected was ketoprofen. The formulations developed were 30% and 40% poloxamer gels. Of these formulations, the 30% poloxamer gels were selected as ideal gels. DSC and XRD studies showed an amorphous nature of the drug after extrusion. It was observed from the permeation studies that with increasing poloxamer concentration, a decrease in drug permeation was obtained. Other studies conducted for the formulations included in-vitro release studies, texture analysis, rheological studies and pH measurements. In conclusion, the hot-melt extrusion technology could be successfully employed to develop poloxamer gels by overcoming the drawbacks associated with the conventional techniques. Published by Elsevier B.V.

Apical extrusion of debris in four different endodontic instrumentation systems: A meta-analysis

PubMed Central

Western, J. Sylvia; Dicksit, Daniel Devaprakash

2017-01-01

Background: All endodontic instrumentation systems tested so far, promote apical extrusion of debris, which is one of the main causes of postoperative pain, flare ups, and delayed healing. Objectives: Of this meta-analysis was to collect and analyze in vitro studies quantifying apically extruded debris while using Hand ProTaper (manual), ProTaper Universal (rotary), Wave One (reciprocating), and self-adjusting file (SAF; vibratory) endodontic instrumentation systems and to determine methods which produced lesser extrusion of debris apically. Methodology: An extensive electronic database search was done in PubMed, Scopus, Cochrane, LILACS, and Google Scholar from inception until February 2016 using the key terms “Apical Debris Extrusion, extruded material, and manual/rotary/reciprocating/SAF systems.” A systematic search strategy was followed to extract 12 potential articles from a total of 1352 articles. The overall effect size was calculated from the raw mean difference of weight of apically extruded debris. Results: Statistically significant difference was seen in the following comparisons: SAF < Wave One, SAF < Rotary ProTaper. Conclusions: Apical extrusion of debris was invariably present in all the instrumentation systems analyzed. SAF system seemed to be periapical tissue friendly as it caused reduced apical extrusion compared to Rotary ProTaper and Wave One. PMID:28761250

Analysis and modeling of hot extrusion die for its service life enhancement

NASA Astrophysics Data System (ADS)

Akhtar, Syed Sohail

Aluminum extrusion finds extensive application in the construction, automobile and aerospace industries. High pressures, elevated temperatures, complex and intricate section geometries lead to repeated mechanical and thermal stresses in the die and affiliated tooling. Product rework and rejects can be traced back to various defects spread over the die life cycle: die design, die manufacture and heat treatment, process parameters, inprocess die maintenance/correction and, billet type and quality. Therefore, improved and efficient service life of die and related tooling used in the extrusion press is one the most important factors in maximizing productivity and minimizing cost for ensuring the economical efficiency of an aluminum extrusion plant. How often a die has to be scrapped and replaced with a new one directly contributes to the commercial viability of producing a certain profile. The focus of the current work is on three distinct yet inter-related studies pertaining to the improvement of aluminum extrusion die. Study-A (Die Failure Analysis) is an investigation of various modes and critical failure types based on industrial data (Chapter-2 ), examination of failed dies and finite element simulation for identification of critical process parameters and design features in die fatigue-life (Chapter-3). In Study-B (Die Surface Hardening Treatment), two-stage controlled gas nitriding process for H13 steel is evaluated, both experimentally and numerically, in terms of nitrided case morphology and properties (Chapter-4) followed by experimental and numerical investigation of the effects of repeated nitriding (Chapter-5), pre-nitriding surface preparation (Chapter-6) and die profile geometry (Chapter-7) on nitriding performance in regard to die service life. In Study-C (Effect of Billet Quality on Die Life), the effect of billet quality and related influencing extrusion parameters on the die service life is investigated based on industrial data and some regression

Extrusion Processing of Raw Food Materials and by-products: A Review.

PubMed

Offiah, Vivian; Kontogiorgos, Vassilis; Falade, Kolawole O

2018-05-22

Extrusion technology has rapidly transformed the food industry with its numerous advantages over other processing methods. It offers a platform for processing different products from various food groups by modifying minor or major ingredients and processing conditions. Although cereals occupy a large portion of the extruded foods market, several other types of raw materials have been used. Extrusion processing of various food groups, including cereals and pseudo cereals, roots and tubers, pulses and oilseeds, fruits and vegetables, and animal products, as well as structural and nutritional changes in these food matrices are reviewed. Value addition by extrusion to food processing wastes and by-products from fruits and vegetables, dairy, meat and seafood, cereals and residues from starch, syrup and alcohol production, and oilseed processing are also discussed. Extrusion presents an economical technology for incorporating food processing residues and by-products back into the food stream. In contemporary scenarios, rising demand for extruded products with functional ingredients, attributed to evolving lifestyles and preferences, have led to innovations in the form, texture, color and content of extruded products. Information presented in this review would be of importance to processors and researchers as they seek to enhance nutritional quality and delivery of extruded products.

The history of syphilis in Uganda

PubMed Central

Davies, J. N. P.

1956-01-01

The circumstances of an alleged first outbreak of syphilis in Uganda in 1897 are examined and attention is drawn to certain features which render possible alternative explanations of the history of syphilis in that country. It is suggested that an endemic form of syphilis was an old disease of southern Uganda and that protective infantile inoculation was practised. The country came under the observation of European clinicians at a time when endemic syphilis was being replaced by true venereal syphilis. This process has now been completed, endemic syphilis has disappeared, and venereal syphilis is now widespread and a more serious problem than ever. This theory explains the observations of other writers and reconciles the apparent discrepancies between various reports. PMID:13404471

Extrusion of metal oxide superconducting wire, tube or ribbon

DOEpatents

Dusek, Joseph T.

1993-10-05

A process for extruding a superconducting metal oxide composition YBa.sub.2 Cu.sub.3 O.sub.7-x provides a wire (tube or ribbon) having a cohesive mass and a degree of flexibility together with enhanced electrical properties. Wire diameters in the range of 6-85 mils have been produced with smaller wires on the order of 10 mils in diameter exhibiting enhanced flexibility for forming braided, or multistrand, configurations for greater current carrying capacity. The composition for extrusion contains a polymeric binder to provide a cohesive mass to bind the particles together during the extrusion process with the binder subsequently removed at lower temperatures during sintering. The composition for extrusion further includes a deflocculent, an organic plasticizer and a solvent which also are subsequently removed during sintering. Electrically conductive tubing with an inner diameter of 52 mil and an outer diameter of 87-355 mil has also been produced. Flat ribbons have been produced in the range of 10-125 mil thick by 100-500 mil wide. The superconducting wire, tube or ribbon may include an outer ceramic insulating sheath co-extruded with the wire, tubing or ribbon.

Extrusion of metal oxide superconducting wire, tube or ribbon

DOEpatents

Dusek, Joseph T.

1993-01-01

A process for extruding a superconducting metal oxide composition YBa.sub.2 Cu.sub.3 O.sub.7-x provides a wire (tube or ribbon) having a cohesive mass and a degree of flexibility together with enhanced electrical properties. Wire diameters in the range of 6-85 mils have been produced with smaller wires on the order of 10 mils in diameter exhibiting enhanced flexibility for forming braided, or multistrand, configurations for greater current carrying capacity. The composition for extrusion contains a polymeric binder to provide a cohesive mass to bind the particles together during the extrusion process with the binder subsequently removed at lower temperatures during sintering. The composition for extrusion further includes a deflocculent, an organic plasticizer and a solvent which also are subsequently removed during sintering. Electrically conductive tubing with an inner diameter of 52 mil and an outer diameter of 87-355 mil has also been produced. Flat ribbons have been produced in the range of 10-125 mil thick by 100-500 mil wide. The superconducting wire, tube or ribbon may include an outer ceramic insulating sheath co-extruded with the wire, tubing or ribbon.

Microstructure and properties of ultrafine grain nickel 200 after hydrostatic extrusion processes

NASA Astrophysics Data System (ADS)

Sitek, R.; Krajewski, C.; Kamiński, J.; Spychalski, M.; Garbacz, H.; Pachla, W.; Kurzydłowski, K. J.

2012-09-01

This paper presents the results of the studies of the structure and properties of ultrafine grained nickel 200 obtained by hydrostatic extrusion processes. Microstructure was characterized by means of optical microscopy and electron transmission microscopy. Corrosion resistance was studied by impedance and potentiodynamic methods using an AutoLab PGSTAT 100 potentiostat in 0.1 M Na2SO4 solution and in acidified (by addition of H2SO4) 0.1 M NaCl solution at pH = 4.2 at room temperature. Microhardness tests were also performed. The results showed that hydrostatic extrusion produces a heterogeneous, ultrafine-grained microstructure in nickel 200. The corrosive resistance tests showed that the grain refinement by hydrostatic extrusion is accompanied by a decreased corrosive resistance of nickel 200.

Geologic map of the Khanneshin carbonatite complex, Helmand Province, Afghanistan, modified from the 1976 original map compilation of V.G. Cheremytsin

USGS Publications Warehouse

Tucker, Robert D.; Peters, Stephen G.; Schulz, Klaus J.; Renaud, Karine M.; Stettner, Will R.; Masonic, Linda M.; Packard, Patricia H.

2011-01-01

This map is a modified version of the Geological map of the Khanneshin carbonatite complex, scale 1:10,000, which was compiled by V.G. Cheremytsin in 1976. Scientists from the U.S. Geological Survey, in cooperation with the Afghan Geological Survey and the Task Force for Business and Stability Operations of the U.S. Department of Defense, studied the original map and also visited the field area in September 2009, August 2010, and February 2011. This modified map, which includes cross sections, illustrates the geologic structure of the Khanneshin carbonatite complex. The map reproduces the topology (contacts, faults, and so forth) of the original Soviet map and cross sections and includes modifications based on our examination of that map and a related report, and based on observations made during our field visits. (Refer to the References section in the Map PDF for complete citations of the original map and related report.) Elevations on the cross section are derived from the original Soviet topography and may not match the newer topography used on the current map. We have attempted to translate the original Russian terminology and rock classification into modern English geologic usage as literally as possible without changing any genetic or process-oriented implications in the original descriptions. We also use the age designations from the original map. The unit colors on the map and cross sections differ from the colors shown on the original version. The units are colored according to the color and pattern scheme of the Commission for the Geological Map of the World (CGMW) (http://www.ccgm.org).

Extrusion Process by Finite Volume Method Using OpenFoam Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matos Martins, Marcelo; Tonini Button, Sergio; Divo Bressan, Jose

The computational codes are very important tools to solve engineering problems. In the analysis of metal forming process, such as extrusion, this is not different because the computational codes allow analyzing the process with reduced cost. Traditionally, the Finite Element Method is used to solve solid mechanic problems, however, the Finite Volume Method (FVM) have been gaining force in this field of applications. This paper presents the velocity field and friction coefficient variation results, obtained by numerical simulation using the OpenFoam Software and the FVM to solve an aluminum direct cold extrusion process.

75 FR 51243 - Aluminum Extrusions from the People's Republic of China: Postponement of Preliminary...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-19

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-967] Aluminum Extrusions from the... Department of Commerce (``the Department'') initiated an antidumping duty investigation on Aluminum... Aluminum Extrusions from the People's Republic of China: Initiation of Antidumping Duty Investigation, 75...

Dimensional accuracy of aluminium extrusions in mechanical calibration

NASA Astrophysics Data System (ADS)

Raknes, Christian Arne; Welo, Torgeir; Paulsen, Frode

2018-05-01

Reducing dimensional variations in the extrusion process without increasing cost is challenging due to the nature of the process itself. An alternative approach—also from a cost perspective—is using extruded profiles with standard tolerances and utilize downstream processes, and thus calibrate the part within tolerance limits that are not achievable directly from the extrusion process. In this paper, two mechanical calibration strategies for the extruded product are investigated, utilizing the forming lines of the manufacturer. The first calibration strategy is based on global, longitudinal stretching in combination with local bending, while the second strategy utilizes the principle of transversal stretching and local bending of the cross-section. An extruded U-profile is used to make a comparison between the two methods using numerical analyses. To provide response surfaces with the FEA program, ABAQUS is used in combination with Design of Experiment (DOE). DOE is conducted with a two-level fractional factorial design to collect the appropriate data. The aim is to find the main factors affecting the dimension accuracy of the final part obtained by the two calibration methods. The results show that both calibration strategies have proven to reduce cross-sectional variations effectively form standard extrusion tolerances. It is concluded that mechanical calibration is a viable, low-cost alternative for aluminium parts that demand high dimensional accuracy, e.g. due to fit-up or welding requirements.

Propulsion at low Reynolds number via beam extrusion

NASA Astrophysics Data System (ADS)

Gosselin, Frederick; Neetzow, Paul

2014-03-01

We present experimental and theoretical results on the extrusion of a slender beam in a viscous fluid. We are particularly interested in the force necessary to extrude the beam as it buckles with large amplitude due to viscous friction. The problem is inspired by the propulsion of Paramecium via trichocyst extrusion. Self-propulsion in micro-organisms is mostly achieved through the beating of flagella or cilia. However, to avoid a severe aggression, unicellular Paramecium has been observed to extrude trichocysts in the direction of the aggression to burst away. These trichocysts are rod-like organelles which, upon activation, grow to about 40 μm in length in 3 milliseconds before detaching from the animal. The drag force created by these extruding rods pushing against the viscous fluid generates thrust in the opposite direction. We developed an experimental setup to measure the force required to push a steel piano wire into an aquarium filled with corn syrup. This setup offers a near-zero Reynolds number, and allows studying deployments for a range of constant extrusion speeds. The experimental results are reproduced with a numerical model coupling a large amplitude Euler-Bernoulli beam theory with a fluid load model proportional to the local beam velocity. This study was funded in part by the The Natural Sciences and Engineering Research Council of Canada.

Bubonic and pneumonic plague - Uganda, 2006.

PubMed

2009-07-24

Plague is a life-threatening fleaborne disease caused by the bacterium Yersinia pestis. The most common clinical form is bubonic plague, which is characterized by high fever and regional lymphadenitis. Without treatment, infection can spread from lymph nodes to the lungs, resulting in pneumonic plague and the potential for person-to-person transmission through respiratory droplets. In November 2006, the Uganda Ministry of Health received reports of an increase in bubonic plague cases and a possible outbreak of pneumonic plague among residents in the Arua and Nebbi districts. In response, the Uganda Ministry of Health and CDC conducted a joint investigation in the two districts during November 28-December 30, 2006. Overall, 127 clinical plague cases were identified, along with evidence of a focal pneumonic outbreak in Nebbi District. Median age of the patients was 14 years (range: 2 weeks-65 years); 65 (51%) were female. Twenty-eight (22%) of the 127 patients died. Among the 102 patients with documented symptoms, 90 (88%) had bubonic plague, and 12 (12%) had pneumonic plague. The results of this investigation underscore the need to 1) continue efforts to educate residents of rural Uganda regarding the source, signs, and symptoms of plague and the life-saving importance of seeking treatment; 2) strengthen plague surveillance and diagnostic capabilities; and 3) improve emergency response and vector-control capacity, especially in remote regions of the country.

Pullout Fixation of Posterior Medial Meniscus Root Tears: Correlation Between Meniscus Extrusion and Midterm Clinical Results

PubMed

Chung, Kyu Sung; Ha, Jeong Ku; Ra, Ho Jong; Nam, Gun Woo; Kim, Jin Goo

2017-01-01

Medial meniscus posterior root tears (MMPRTs) lead to extrusion of the meniscus during weightbearing as well as loss of the ability of the meniscus to generate hoop stress. This loss of load-sharing ability leads to progressive arthritic changes. However, there have been no studies that correlate the correction of meniscus extrusion with clinical outcomes. Decreased meniscus extrusion is associated with better clinical and radiographic outcomes compared with increased meniscus extrusion after MMPRT pullout fixation. Case-control study; Level of evidence, 3. A total of 39 patients who underwent MMPRT pullout fixation and had been observed for more than 5 years were recruited for this study. The mean follow-up period was 69.8 months. Participants were categorized into 2 groups according to the direction of meniscus extrusion: group A (increased extrusion; 23 patients) and group B (decreased extrusion; 16 patients). Meniscus extrusion was assessed in the coronal plane on magnetic resonance imaging preoperatively and at 1 year postoperatively. The postoperative clinical outcomes (Lysholm and International Knee Documentation Committee [IKDC] scores) and radiographic results (Kellgren-Lawrence [K-L] grade and medial joint space) were compared between groups. Meniscus extrusion in group A increased significantly from a mean (±SD) of 3.5 ± 0.9 mm preoperatively to 5.1 ± 1.4 mm at 1 year postoperatively ( P < .001), whereas in group B, it decreased significantly from 4.1 ± 1.3 mm preoperatively to 3.5 ± 1.4 mm at 1 year postoperatively ( P < .001). The K-L arthritis grade (0/1/2/3/4) significantly progressed in group A (from 2/12/9/0/0 preoperatively to 0/1/14/8/0 postoperatively, respectively; P = .009) but not in group B (from 1/11/4/0/0 preoperatively to 0/6/8/2/0 postoperatively, respectively; P = .274). The mean final Lysholm and IKDC scores in group B (88.1 ± 12.1 and 79.0 ± 11.4, respectively) were significantly better than those in group A (81.0 ± 9.0 and 71

Scaled-Up Fabrication of Thin-Walled ZK60 Tubing using Shear Assisted Processing and Extrusion (ShAPE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whalen, Scott A.; Joshi, Vineet V.; Overman, Nicole R.

Shear Assisted Processing and Extrusion (ShAPE) has been scaled-up and applied to direct extrusion of thin-walled magnesium tubing. Using ShAPE, billets of ZK60A-T5 were directly extruded into round tubes having an outer diameter of 50.8 mm and wall thickness of 1.52 mm. The severe shearing conditions inherent to ShAPE resulted in microstructural refinement with an average grain size of 3.8μm measured at the midpoint of the tube wall. Tensile testing per ATSM E-8 on specimens oriented parallel to the extrusion direction gave an ultimate tensile strength of 254.4 MPa and elongation of 20.1%. Specimens tested perpendicular to the extrusion directionmore » had an ultimate tensile strength of 297.2 MPa and elongation of 25.0%. Due to material flow effects resulting from the simultaneous linear and rotational shear intrinsic to ShAPE, ram force and electrical power consumption during extrusion were just 40 kN and 11.5 kW respectively. This represents a significant reduction in ram force and power consumption compared to conventional extrusion. As such, there is potential for ShAPE to offer a scalable, lower cost extrusion option with potentially improved bulk mechanical properties.« less

Effect of extrusion conditions on the physico-chemical properties and in vitro protein digestibility of canola meal.

PubMed

Zhang, Bo; Liu, Guo; Ying, Danyang; Sanguansri, Luz; Augustin, Mary Ann

2017-10-01

Canola meal has potential as a high protein food ingredient. The extrusion-induced changes in color, pH, extractable protein and in vitro protein digestibility of canola meal under different extrusion conditions was assessed. The extrusion barrel moisture (24%, 30% or 36%) and screw kneading block length (0, 30 or 60mm) were used as independent process parameters. Extrusion at high barrel moisture (36%) favored protein aggregation resulting in lower extractable protein compared to extrusion at the lowest barrel moisture (24%). At lower barrel moisture contents (24% and 30%), a longer kneading block length increased extractable protein but this was not the case at 36% barrel moisture. Canola protein digestibility was improved upon extrusion at 30% barrel moisture but there was no significant change at lower (24%) or higher (36%) barrel moisture. The kneading block length of the screw had no significant effect on the canola protein digestibility within the same barrel moisture level. The relationship between the physico-chemical parameters and in vitro digestibility was examined. This study highlighted the complex interplay of extrusion processing variables that affect protein degradation and the interaction of components, with consequent effects on protein digestibility. Copyright © 2017 Elsevier Ltd. All rights reserved.

Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications.

PubMed

Placone, Jesse K; Engler, Adam J

2018-04-01

Additive manufacturing, or 3D printing, has become significantly more commonplace in tissue engineering over the past decade, as a variety of new printing materials have been developed. In extrusion-based printing, materials are used for applications that range from cell free printing to cell-laden bioinks that mimic natural tissues. Beyond single tissue applications, multi-material extrusion based printing has recently been developed to manufacture scaffolds that mimic tissue interfaces. Despite these advances, some material limitations prevent wider adoption of the extrusion-based 3D printers currently available. This progress report provides an overview of this commonly used printing strategy, as well as insight into how this technique can be improved. As such, it is hoped that the prospective report guides the inclusion of more rigorous material characterization prior to printing, thereby facilitating cross-platform utilization and reproducibility. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Characterisation of the wall-slip during extrusion of heavy-clay products

NASA Astrophysics Data System (ADS)

Kocserha, I.; Gömze, A. L.; Kulkov, S.; Kalatur, E.; Buyakova, S. P.; Géber, R.; Buzimov, A. Y.

2017-01-01

During extrusion through the extrusion die, heavy-clay compounds are usually show plug flow with extensive slip at the wall of the die. In this study, the viscosity and the thickness of the slip layer were investigated. For the examination a brick-clay from Malyi (Hungary) deposit was applied as a raw material. The clay was characterised by XRPD, BET, SEM and granulometry. As the slip layer consists of suspension of the fine clay fraction so the clay minerals content of the clay (d<2µm) was separated by the help of sedimentation. The viscosity of suspension with different water content was measured by means of rotational viscosimeter. The thickness of the slip layer was calculated from the measured viscosity and other data obtained from an earlier study with capillary rheometer. The calculated thickness value showed a tendency to reach a limit value by increasing the extrusion speed.

Forward impact extrusion of surface textured steel blanks using coated tooling

NASA Astrophysics Data System (ADS)

Hild, Rafael; Feuerhack, Andreas; Trauth, Daniel; Arghavani, Mostafa; Kruppe, Nathan C.; Brögelmann, Tobias; Bobzin, Kirsten; Klocke, Fritz

2017-10-01

A method to enable dry metal forming by the means of a self-lubricating coating and surface textures was researched using an innovative Pin-On-Cylinder-Tribometer. The experimental analysis was complemented by a numerical model of the complex contact conditions between coated tools and the surface textured specimen at the micro-level. Based on the results, the explanation of the tribological interactions between surface textured specimens and the tool in dry full forward extrusion is the objective of this work. Therefore, experimental dry extrusion tests were performed using a tool system. The extruded specimens were evaluated regarding their geometry as well as by the required punch force. Thereby, the effectiveness and the feasibility of dry metal forming on the example of full forward extrusion was evaluated. Thus, one more step towards the technical realization of dry metal forming of low alloy steels under industrial conditions was realized.

Reduction of fumonisin B₁ in corn grits by twin-screw extrusion.

PubMed

Jackson, Lauren S; Jablonski, Joseph; Bullerman, Lloyd B; Bianchini, Andreia; Hanna, Milford A; Voss, Kenneth A; Hollub, April D; Ryu, Dojin

2011-08-01

This study was designed to investigate the fate of fumonisins in flaking corn grits during twin-screw extrusion by measuring fumonisin B₁ (FB₁) and its analogs with a mass balance approach. Food grade corn grits and 2 batches of grits contaminated with FB₁ at 10 and 50 μg/g by Fusarium verticillioides M-2552 were processed with or without glucose supplementation (10%, w/w) with a twin-screw extruder. Extrusion reduced FB₁ in contaminated grits by 64% to 72% without glucose and 89% to 94% with added glucose. In addition, extrusion alone resulted in 26% to 73% reduction in the levels of fumonisin B₂ and fumonisin B₃, while levels of both mycotoxins were reduced by >89% in extruded corn grits containing 10% glucose. Mass balance analysis showed that 38% to 46% of the FB₁ species detected in corn extruded with glucose was N-(deoxy-D-fructos-1-yl)-FB₁, while 23% to 37% of FB₁ species detected in extruded corn grits with and without added glucose was bound to the matrix. It was also found that the hydrolyzed form of FB₁ was a minor species in extruded corn grits with or without added glucose, representing <15% of the total FB₁ species present. Less than 46% of FB₁ originally present in corn grits could be detected in the fumonisin analogues measured in this study. Research is needed to identify the reaction products resulting from extrusion processing of fumonisin-contaminated corn products. Twin-screw extrusion is widely used in food industry for its versatility. This technology may reduce the level of fumonisins in corn particularly with added glucose. Journal of Food Science © 2011 Institute of Food Technologists® No claim to original US government works.

Midwives' provision of antimalaria services to pregnant women in Uganda.

PubMed

Bbosa, Richard Serunkuma; Ehlers, Valerie Janet

2017-04-01

malaria causes complications during 80% of all pregnancies in Uganda. However, only 48% of Ugandan pregnant women took one dose of intermittent preventive therapy while merely 27% took the second dose during 2011. This study investigated midwives' provision of anti-malaria services in the Buikwe District of Uganda. a quantitative exploratory descriptive design was used. prenatal clinics (n=16) in the Buikwe District of Uganda RESPONDENTS: questionnaires were completed by 40 (out of a population of 45) midwives. midwives' provision of malaria-preventive services to pregnant women were associated with the midwives' education level and professional experience as well as by the availability of safe drinking water and drugs for intermittent preventive treatment. Midwives who provided frequent health education to pregnant women, cooperated with village health team members and received in-service training were likely to provide effective anti-malaria services to pregnant women. regular audits of midwives' records should identify strengths and weaknesses related to the prevention of malaria during pregnancy. Relevant in- service education should be provided. Drugs for intermittent preventive therapy and clean drinking water must be available at all prenatal clinics so that pregnant women can take these drugs under direct observation of the midwives. malaria-related health education should be provided during every prenatal clinic visit, and every pregnant women should take two doses of intermittent preventive therapy drugs during every pregnancy (as prescribed by Uganda's Ministry of Health) in order to reduce the reported impact of malaria on 80% of pregnancies in Uganda. Copyright © 2017 Elsevier Ltd. All rights reserved.

Simultaneous saccharification and fermentation of broken rice: an enzymatic extrusion liquefaction pretreatment for Chinese rice wine production.

PubMed

Li, Hongyan; Jiao, Aiquan; Xu, Xueming; Wu, Chunsen; Wei, Benxi; Hu, Xiuting; Jin, Zhengyu; Tian, Yaoqi

2013-08-01

Broken rice, pretreated by enzymatic extrusion liquefaction, was used to produce Chinese rice wine by simultaneous saccharification and fermentation (SSF) process in this study. The study compared the novel process and traditional process for Chinese rice wine fermentation utilizing broken rice and head rice, respectively. With the optimum extrusion parameters (barrel temperature, 98 °C; moisture content, 42% and amylase concentration, 1‰), 18% (v/v at 20 °C) alcoholic degree, 37.66% fermentation recovery and 93.63% fermentation efficiency were achieved, indicating enzymatic extrusion-processed rice wine from broken rice exhibited much higher fermentation rate and efficiency than traditional-processed rice wine from head rice during SSF. The starch molecule distribution data indicated that the alcoholic degree was related to the oligosaccharides' formation during enzymatic extrusion. Sum of amino acid (AA) in the extrusion-processed wine was 53.7% higher than that in the traditional one. These results suggest that the enzymatic extrusion pretreatment for broken rice is a feasible and alternative process in the fermentation of Chinese rice wine.

Shuttle Primary Reaction Control Subsystem Thruster Fuel Valve Pilot Seal Extrusion: A Failure Correlation

NASA Technical Reports Server (NTRS)

Waller, Jess; Saulsberry, Regor L.

2003-01-01

Pilot operated valves (POVs) are used to control the flow of hypergolic propellants monomethylhydrazine (fuel) and nitrogen tetroxide (oxidizer) to the Shuttle orbiter Primary Reaction Control Subsystem (PRCS) thrusters. The POV incorporates a two-stage design: a solenoid-actuated pilot stage, which in turn controls a pressure-actuated main stage. Isolation of propellant supply from the thruster chamber is accomplished in part by a captive polytetrafluoroethylene (PTFE) pilot seal retained inside a Custom 455.1 stainless steel cavity. Extrusion of the pilot seal restricts the flow of fuel around the pilot poppet, thus impeding or preventing the main valve stage from opening. It can also prevent the main stage from staying open with adequate force margin, particularly if there is gas in the main stage actuation cavity. During thruster operation on-orbit, fuel valve pilot seal extrusion is commonly indicated by low or erratic chamber pressure or failure of the thruster to fire upon command (Fail-Off). During ground turnaround, pilot seal extrusion is commonly indicated by slow gaseous nitrogen (GN2) main valve opening times (greater than 38 ms) or slow water main valve opening response times (greater than 33 ms). Poppet lift tests and visual inspection can also detect pilot seal extrusion during ground servicing; however, direct metrology on the pilot seat assembly provides the most quantitative and accurate means of identifying extrusion. Minimizing PRCS fuel valve pilot seal extrusion has become an important issue in the effort to improve PRCS reliability and reduce associated life cycle costs.

Hot melt extrusion versus spray drying: hot melt extrusion degrades albendazole.

PubMed

Hengsawas Surasarang, Soraya; Keen, Justin M; Huang, Siyuan; Zhang, Feng; McGinity, James W; Williams, Robert O

2017-05-01

The purpose of this study was to enhance the dissolution properties of albendazole (ABZ) by the use of amorphous solid dispersions. Phase diagrams of ABZ-polymer binary mixtures generated from Flory-Huggins theory were used to assess miscibility and processability. Forced degradation studies showed that ABZ degraded upon exposure to hydrogen peroxide and 1 N NaOH at 80 °C for 5 min, and the degradants were albendazole sulfoxide (ABZSX), and ABZ impurity A, respectively. ABZ was chemically stable following exposure to 1 N HCl at 80 °C for one hour. Thermal degradation profiles show that ABZ, with and without Kollidon ® VA 64, degraded at 180 °C and 140 °C, respectively, which indicated that ABZ could likely be processed by thermal processing. Following hot melt extrusion, ABZ degraded up to 97.4%, while the amorphous ABZ solid dispersion was successfully prepared by spray drying. Spray-dried ABZ formulations using various types of acids (methanesulfonic acid, sulfuric acid and hydrochloric acid) and polymers (Kollidon ® VA 64, Soluplus ® and Eudragit ® E PO) were studied. The spray-dried ABZ with methanesulfonic acid and Kollidon ® VA 64 substantially improved non-sink dissolution in acidic media as compared to bulk ABZ (8-fold), physical mixture of ABZ:Kollidon ® VA 64 (5.6-fold) and ABZ mesylate salt (1.6-fold). No degradation was observed in the spray-dried product for up to six months and less than 5% after one-year storage. In conclusion, amorphous ABZ solid dispersions in combination with an acid and polymer can be prepared by spray drying to enhance dissolution and shelf-stability, whereas those made by melt extrusion are degraded.

Plasticized chitosan/polyolefin films produced by extrusion.

PubMed

Matet, Marie; Heuzey, Marie-Claude; Ajji, Abdellah; Sarazin, Pierre

2015-03-06

Plasticized chitosan and polyethylene blends were produced through a single-pass extrusion process. Using a twin-screw extruder, chitosan plasticization was achieved in the presence of an acetic acid solution and glycerol, and directly mixed with metallocene polyethylene, mPE, to produce a masterbatch. Different dilutions of the masterbatch (2, 5 and 10 wt% of plasticized chitosan), in the presence of ethylene vinyl acetate, EVA, were subsequently achieved in single screw film extrusion. Very small plasticized chitosan domains (number average diameter <5 μm) were visible in the polymeric matrix. The resulting films presented a brown color and increasing haze with chitosan plasticized content. Mechanical properties of the mPE films were affected by the presence of plasticized chitosan, but improvement was observed as a result of some compatibility between mPE and chitosan in the presence of EVA. Finally the incorporation of plasticized chitosan affected mPE water vapor permeability while oxygen permeability remained constant. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Comparison of Apical Bacterial Extrusion in Manual, ProTaper Rotary, and One Shape Rotary Instrumentation Techniques.

PubMed

Mittal, Rakesh; Singla, Meenu G; Garg, Ashima; Dhawan, Anu

2015-12-01

Apical extrusion of irrigants and debris is an inherent limitation associated with cleaning and shaping of root canals and has been studied extensively because of its clinical relevance as a cause of flare-ups. Many factors affect the amount of extruded intracanal materials. The purpose of this study was to assess the bacterial extrusion by using manual, multiple-file continuous rotary system (ProTaper) and single-file continuous rotary system (One Shape). Forty-two human mandibular premolars were inoculated with Enterococcus faecalis by using a bacterial extrusion model. The teeth were divided into 3 experimental groups (n = 12) and 1 control group (n = 6). The root canals of experimental groups were instrumented according to the manufacturers' instructions by using manual technique, ProTaper rotary system, or One Shape rotary system. Sterilized saline was used as an irrigant, and bacterial extrusion was quantified as colony-forming units/milliliter. The results obtained were statistically analyzed by using one-way analysis of variance for intergroup comparison and post hoc Tukey test for pair-wise comparison. The level for accepting statistical significance was set at P < .05. All the instrumentation techniques resulted in bacterial extrusion, with manual step-back technique exhibiting significantly more bacterial extrusion than the engine-driven systems. Of the 2 engine-driven systems, ProTaper rotary extruded significantly more bacteria than One Shape rotary system (P < .05). The engine-driven nickel-titanium systems were associated with less apical extrusion. The instrument design may play a role in amount of extrusion. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Hollywood in Uganda: Local Appropriation of Trans-National English-Language Movies

ERIC Educational Resources Information Center

Achen, Stella; Openjuru, George Ladaah

2012-01-01

Hollywood movies are popular in Uganda. This paper reports a study that investigated access to English-language Hollywood movies in Uganda, by way of an ethnographic audience study carried out in slum areas of the city of Kampala. The researchers visited and participated in the watching and reviewing of English-language movies in makeshift video…

Detrital zircon provenance evidence for large-scale extrusion along the Altyn Tagh fault

USGS Publications Warehouse

Yue, Y.; Graham, S.A.; Ritts, B.D.; Wooden, J.L.

2005-01-01

The question of whether or not the Altyn Tagh fault is a large-scale extrusion boundary is critical for understanding the role of lateral extrusion in accommodating the Indo-Asian convergence and in building the Tibetan Plateau. Oligocene conglomerate clasts in the eastern Xorkol basin are low-grade slate, phyllite, sandstone, dacite and carbonate, and associated paleocurrent indicators evince sediment derivation from the opposing side of the Altyn Tagh fault. Matching these clasts with similar basement rocks in the North Qilian and Tuolainanshan terranes requires post-Oligocene left-lateral offset of 380 ?? 60 km on the eastern segment of the Altyn Tagh fault, suggesting large-scale extrusion along the fault in the Cenozoic (Yue, Y.J., Ritts, B.D., Graham, S.A., 2001b. Initiation and long-term slip history of the Altyn Tagh fault. International Geological Review 43, 1087-1094.). In order to further define this piercing point, the detrital zircon pattern of Oligocene sandstone from the Xorkol basin and the zircon ages of basement on the southern side of the fault were established by ion microprobe dating. Characterized by strong peaks between 850 and 950 Ma and the absence of Paleozoic and Mesozoic ages, the detrital zircon age pattern of the Oligocene sandstone matches the age distribution of zircon-bearing rocks of the Tuolainanshan terrane. This match requires 360 ?? 40 km of post-Oligocene left-lateral displacement on the eastern segment of the Altyn Tagh fault, supporting as well as refining the previously reported lithology-based cross-fault match. At least one of the following three extrusion scenarios must have existed to accommodate this large offset: (1) northeastward extrusion along the Altyn Tagh-Alxa-East Mongolia fault, (2) eastward extrusion along the Altyn Tagh-North Qilian-Haiyuan fault, and (3) northeastward extrusion of northern Tibet as a Himalaya-scale thrust sheet along the North Qilian-Haiyuan fault. We prefer the first scenario inasmuch as

Formation of chromosomal domains in interphase by loop extrusion

NASA Astrophysics Data System (ADS)

Fudenberg, Geoffrey

While genomes are often considered as one-dimensional sequences, interphase chromosomes are organized in three dimensions with an essential role for regulating gene expression. Recent studies have shown that Topologically Associating Domains (TADs) are fundamental structural and functional building blocks of human interphase chromosomes. Despite observations that architectural proteins, including CTCF, demarcate and maintain the borders of TADs, the mechanisms underlying TAD formation remain unknown. Here we propose that loop extrusion underlies the formation TADs. In this process, cis-acting loop-extruding factors, likely cohesins, form progressively larger loops, but stall at TAD boundaries due to interactions with boundary proteins, including CTCF. This process dynamically forms loops of various sizes within but not between TADs. Using polymer simulations, we find that loop extrusion can produce TADs as determined by our analyses of the highest-resolution experimental data. Moreover, we find that loop extrusion can explain many diverse experimental observations, including: the preferential orientation of CTCF motifs and enrichments of architectural proteins at TAD boundaries; TAD boundary deletion experiments; and experiments with knockdown or depletion of CTCF, cohesin, and cohesin-loading factors. Together, the emerging picture from our work is that TADs are formed by rapidly associating, growing, and dissociating loops, presenting a clear framework for understanding interphase chromosomal organization.

Research on Extrusion of Rubber Composites Reinforced by Short Fibers Orientation Based on FEA

NASA Astrophysics Data System (ADS)

Zhang, Dewei; Wang, Chuansheng; Shen, Bo; Li, Shaoming; Bian, Huiguang

2018-06-01

In recent years, rubber composites reinforced by short fibers has been researched deeply, because of its good performances such as higher wear resistance, higher cut resistance and so on. Some research results indicated that if short fibers get orientation in rubber composites, the performances of rubber products could be promoted greatly. But how to make short fibers get orientation in rubber matrix during extrusion is still a real problem. And there are many parameters affect the short fibers orientation. So, in this paper, the effects of die structure including expansion-die and dam-expansion-die on extrusion flow field of short fiber and rubber composite material during extrusion process has been researched by Polyflow. And the FEA results about the pressure field, velocity field and the velocity vector of the rubber composites flow field indicate that, comparing with expansion-die and the dam-expansion-die, the latter one is better for the extrusion process of rubber composites and making short fibers get radial orientation in rubber matrix.

Lateral extrusion of Tunisia : Contribution of Jeffara Fault (southern branch) and Petroleum Implications

NASA Astrophysics Data System (ADS)

Ghedhoui, R.; Deffontaines, B.; Rabia, M. C.

2012-04-01

Contrasting to the northward African plate motion toward Eurasia and due to its geographic position in the North African margin, since early cretaceous, Tunisia seems to be submitted to an eastward migration. The aim of this work is to study the southern branch of this inferred tectonic splay that may guide the Tunisian extrusion characterised to the east by the Mediterranean sea as a free eastern boundary. The Jeffara Fault zone (southern Tunisia), represent a case example of such deformation faced by Tunisia. Helped by the results of previous researchers (Bouaziz, 1995 ; Rabiaa, 1998 ; Touati et Rodgers, 1998 ; Sokoutis D. et al., 2000 ; Bouaziz et al., 2002 ; Jallouli et al., 2005 ; Deffontaines et al., 2008…), and new evidences developed in this study, we propose a geodynamic Tunisian east extrusion model, due to such the northern African plate migration to the Eurasian one. In this subject, structural geomorphology is undertaken herein based on both geomorphometric drainage network analysis (Deffontaines et al., 1990), the Digital Terrain Model photo-interpretation (SRTM) combined with photo-interpretation of detailed optical images (Landsat ETM+), and confirmed by field work and numerous seismic profiles at depth. All these informations were then integrated within a GIS (Geodatabase) (Deffontaines 1990 ; Deffontaines et al. 1994 ; Deffontaines, 2000 ; Slama, 2008 ; Deffontaines, 2008) and are coherent with the eastern extrusion of the Sahel block. We infer that the NW-SE Gafsa-Tozeur, which continue to the Jeffara major fault zone acting as a transtensive right lateral motion since early cretaceous is the southern branch of the Sahel block extrusion. Our structural analyses prove the presence of NW-SE right lateral en-echelon tension gashes, NW-SE aligned salt diapirs, numerous folds offsets, en-echelon folds, and so on that parallel this major NW-SE transtensive extrusion fault zone.These evidences confirm the fact that the NW-SE Jeffara faults correspond

The formation of giant clastic extrusions at the end of the Messinian Salinity Crisis

NASA Astrophysics Data System (ADS)

Kirkham, Christopher; Cartwright, Joe; Hermanrud, Christian; Jebsen, Christopher

2018-01-01

This paper documents the discovery of five multi-km scale lensoid bodies that directly overlie the upper surface of the thick (>1 km) Messinian Evaporite sequence. They were identified through the analysis of 3D seismic data from the western Nile Cone. The convergence of the upper and lower bounding reflections of these lensoid bodies, their external and internal reflection configuration, the positive 'depositional' relief at their upper surface, and the stratal relationship with underlying and overlying deposits supports the interpretation that these are giant clastic extrusions. The interpretations combined with the stratal position of these clastic extrusions demonstrate a prior unsuspected link between periods of major environment change and basin hydrodynamics on a plate scale. All five lensoid bodies were extruded onto a single, seismically resolvable marker horizon correlatable with the end of the Messinian Salinity Crisis (Horizon M). It is argued that the source of these clastic extrusions is pre-Messinian in origin, which implies massive sediment remobilisation at depth in the pre-evaporitic succession and intrusion through the thick evaporite layer. We propose that the scale and timing of this dramatic event was primed and triggered by near-lithostatic overpressure in the pre-evaporitic sediments generated through (1) their rapid burial and loading during the Messinian Salinity Crisis and (2) catastrophic re-flooding during its immediate aftermath. The largest of these clastic extrusions has a volume of over c. 116 km3, making it amongst the largest extruded sedimentary bodies described on Earth. The findings extend the understanding of the upper scale of other analogous clastic extrusions such as mud volcanoes and sediment-hosted hydrothermal systems. Following the 2006 eruption of the Lusi sediment-hosted hydrothermal system in Indonesia, an understanding of the upper scale limit of clastic extrusions has even greater societal relevance, in order to

Effects of extrusion variables on the properties of waxy hulless barley extrudates.

PubMed

Köksel, Hamit; Ryu, Gy-Hyung; Başman, Arzu; Demiralp, Hande; Ng, Perry K W

2004-02-01

The objective of this research was to investigate the extrudability of waxy hulless barley flour under various extrusion conditions. Waxy hulless barley flour was processed in a laboratory-scale corotating twin-screw extruder with different levels of feed moisture content (22.3, 26.8, and 30.7%) and die temperature (130, 150, and 170 degrees C) to develop a snack food with high beta-glucan content. The effects of extrusion condition variables (screw configuration, moisture, and temperature) on the system variables (pressure and specific mechanical energy), the extrudate physical properties (sectional expansion index, bulk density), starch gelatinization, pasting properties (cold peak viscosity, trough viscosity, and final viscosity), and beta-glucan contents were determined. Results were evaluated by using response surface methodology. Increased extrusion temperature and feed moisture content resulted in decreases in exit die pressure and specific mechanical energy values. For extrudates extruded under low shear screw configuration (LS), increased barrel temperature decreased sectional expansion index (SEI) values at both low and high moisture contents. The feed moisture seems to have an inverse relationship with SEI over the range studied. Bulk density was higher at higher moisture contents, for both low and high barrel temperatures, for samples extruded under high shear screw configuration (HS) and LS. Cold peak viscosities (CV) were observed in all samples. The CV increased with the increase in extrusion temperature and feed moisture content. Although beta-glucan contents of the LS extrudates were comparable to that of barley flour sample, HS samples had generally lower beta-glucan contents. The extrusion cooking technique seems to be promising for the production of snack foods with high beta-glucan content, especially using LS conditions.

76 FR 18521 - Aluminum Extrusions From the People's Republic of China: Final Affirmative Countervailing Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-04

... People's Republic of China: Final Affirmative Countervailing Duty Determination AGENCY: Import... producers and exporters of aluminum extrusions from the People's Republic of China (the PRC). For... Aluminum Extrusions From the People's Republic of China: Preliminary Affirmative Countervailing Duty...

Interaction of Two Slip Planes on Extrusion Growth in Fatigue Band

DTIC Science & Technology

1987-01-01

observed under microscope in fatigue specimens as indicated by Essmann et al . [23] and Mughrabi [24]. t I 1 It I I 3 @ O.OS^ = 0 1S^ lAlONG SUP... Mughrabi , et. al . [25] have suggested a model of dislocation dipoles in a single crystal as shown in Fig. 2. The initial inelastic strain e^„ due to the...interesting question which was raised by Mughrabi , and Essmann et. al . [23] was, after the extrusion has reached the amount of static extrusion , will

Extrusion-spheronization: process variables and characterization.

PubMed

Sinha, V R; Agrawal, M K; Agarwal, A; Singh, G; Ghai, D

2009-01-01

Multiparticulate systems have undergone great development in the past decade fueled by the better understanding of their multiple roles as a suitable delivery system. With the passage of time, significant advances have been made in the process of pelletization due to the incorporation of specialized techniques for their development. Extrusion-spheronization seems to be the most promising process for the optimum delivery of many potent drugs having high systemic toxicity. It also offers immense pharmaceutical applicability due to the benefits of high loading capacity of active ingredient(s), narrow size distribution, and cost-effectiveness. On application of a specific coat, these systems can also aid in site-specific delivery, thereby enhancing the bioavailability of many drugs. The current review focuses on the process of extrusion-spheronization and the operational (extruder types, screen pressure, screw speed, temperature, moisture content, spheronization load, speed and time) and formulation (excipients and drugs) variables, which may affect the quality of the final pellets. Various methods for the evaluation of the quality of the pellets with regard to the size distribution, shape, friability, granule strength, density, porosity, flow properties, and surface texture are discussed.

Ebola viral hemorrhagic disease outbreak in West Africa- lessons from Uganda.

PubMed

Mbonye, Anthony K; Wamala, Joseph F; Nanyunja, Miriam; Opio, Alex; Makumbi, Issa; Aceng, Jane Ruth

2014-09-01

There has been a rapid spread of Ebola Viral Hemorrhagic disease in Guinea, Liberia and Sierra Leone since March 2014. Since this is the first time of a major Ebola outbreak in West Africa; it is possible there is lack of understanding of the epidemic in the communities, lack of experience among the health workers to manage the cases and limited capacities for rapid response. The main objective of this article is to share Uganda's experience in controlling similar Ebola outbreaks and to suggest some lessons that could inform the control of the Ebola outbreak in West Africa. The article is based on published papers, reports of previous Ebola outbreaks, response plans and experiences of individuals who have participated in the control of Ebola epidemics in Uganda. Lessons learnt: The success in the control of Ebola epidemics in Uganda has been due to high political support, effective coordination through national and district task forces. In addition there has been active surveillance, strong community mobilization using village health teams and other community resources persons, an efficient laboratory system that has capacity to provide timely results. These have coupled with effective case management and infection control and the involvement of development partners who commit resources with shared responsibility. Several factors have contributed to the successful quick containment of Ebola outbreaks in Uganda. West African countries experiencing Ebola outbreaks could draw some lessons from the Uganda experience and adapt them to contain the Ebola epidemic.

Rheology and Extrusion of Cement-Fly Ashes Pastes

NASA Astrophysics Data System (ADS)

Micaelli, F.; Lanos, C.; Levita, G.

2008-07-01

The addition of fly ashes in cement pastes is tested to optimize the forming of cement based material by extrusion. Two sizes of fly ashes grains are examinated. The rheology of concentrated suspensions of ashes mixes is studied with a parallel plates rheometer. In stationary flow state, tested suspensions viscosities are satisfactorily described by the Krieger-Dougherty model. An "overlapped grain" suspensions model able to describe the bimodal suspensions behaviour is proposed. For higher values of solid volume fraction, Bingham viscoplastic behaviour is identified. Results showed that the plastic viscosity and plastic yield values present minimal values for the same optimal formulation of bimodal mixes. The rheological study is extended to more concentrated systems using an extruder. Finally it is observed that the addition of 30% vol. of optimized ashes mix determined a significant reduction of required extrusion load.

Liner for extrusion billet containers. Interim Technical Documentary Progress Report, February 1--April 30, 1963

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spachner, S. A.

1963-05-01

A shrink-fit assembly device for buildup of ceramiccoated liner and sleeve assemblies was tested and modified to develop desired temperatures and suitable heat distribution in sleeves, which were heated. Nine different compositions of fiber metal reinforced ceramic compacts were produced for preliminary evaluation of suitability for extrusion liner use. Procedures were developed for welding short, hollow ceramic cylinders of high-strength metal carbides and borides to form a ceramic extrusion liner of suitable length. Dissassembly tooling for rapid separation of shrink-fitted sleeves from a worn liner was designed, fabricated, and tested. Preliminary extrusion testing of an alumina-coated liner was carried out,more » using SAE 4340 steel billets extruded to rod at 12 : 1 and 16 : 1 ratios. No coating wear was noted after extrusion of 3 billets. (auth)« less

Possession and Usage of Insecticidal Bed Nets among the People of Uganda: Is BRAC Uganda Health Programme Pursuing a Pro-Poor Path?

PubMed Central

Ahmed, Syed Masud; Zerihun, Abebual

2010-01-01

Background The use of insecticidal bed nets is found to be an effective public health tool for control of malaria, especially for under-five children and pregnant women. BRAC, an indigenous Bangladeshi non-governmental development organization, started working in the East African state of Uganda in June 2006. As part of its efforts to improve the health and well-being of its participants, BRAC Uganda has been distributing long lasting insecticide-treated bed nets (LLIN) at a subsidized price through health volunteers since February 2008. This study was conducted in March-April 2009 to examine how equitable the programme had been in consistence with BRAC Uganda's pro-poor policy. Methodology/Principal Findings Information on possession of LLINs and relevant knowledge on its proper use and maintenance was collected from households either with an under-five child and/or a pregnant woman. The sample included three villages from each of the 10 branch offices where BRAC Uganda's community-based health programme was operating. Data were collected by trained enumerators through face-to-face interviews using a hand-held personal digital assistant (PDA). Findings reveal that the study population had superficial knowledge on malaria and its transmission, including the use and maintenance of LLINs. The households' rate of possession of bed nets (41–59%), and the proportion of under-five children (17–19%) and pregnant women (25–27%) who reported sleeping under an LLIN were not encouraging. Inequity was observed in the number of LLINs possessed by the households, in the knowledge on its use and maintenance, and between the two programme areas. Conclusions/Significance The BRAC Uganda's LLINs distribution at a subsidized price appeared to be inadequate and inequitable, and BRAC's knowledge dissemination is insufficient for initiating preventive actions such as proper use of LLINs to interrupt malaria transmission. Findings contribute to the on-going debate on LLINs

Two-sided friction stir riveting by extrusion: A process for joining dissimilar materials

DOE PAGES

Evans, William T.; Cox, Chase D.; Strauss, Alvin M.; ...

2016-06-25

Two-sided friction stir riveting (FSR) by extrusion is an innovative process developed to rapidly, efficiently, and securely join dissimilar materials. This process extends a previously developed one sided friction stir extrusion process to create a strong and robust joint by producing a continuous, rivet-like structure through a preformed hole in one of the materials with a simultaneous, two-sided friction stir spot weld. The two-sided FSR by extrusion process securely joins the dissimilar materials together and effectively locks them in place without the use of any separate materials or fasteners. Lastly, in this paper we demonstrate the process by joining aluminummore » to steel and illustrate its potential application to automotive and aerospace manufacturing processes.« less

Assessing Community Understanding of Local Environmental Issues in Two Areas of Uganda

ERIC Educational Resources Information Center

Ferrie, Gina M.; Bettinger, Tammie L.; Kuhar, Christopher W.; Lehnhardt, Kathy; Apell, Peter; Kasoma, Panta

2011-01-01

Although there are many conservation education projects working in Uganda, there is currently little evaluation of educational initiatives in the communities. A survey was developed to better understand the environmental knowledge, attitudes, and behaviors of people in 2 districts of Uganda. The main environmental problem listed by the respondents…

Friction Stir Back Extrusion of Aluminium Alloys for Automotive Applications

NASA Astrophysics Data System (ADS)

Xu, Zeren

Since the invention of Friction Stir Welding in 1991 as a solid state joining technique, extensive scientific investigations have been carried out to understand fundamental aspects of material behaviors when processed by this technique, in order to optimize processing conditions as well as mechanical properties of the welds. Based on the basic principles of Friction Stir Welding, several derivatives have also been developed such as Friction Stir Processing, Friction Extrusion and Friction Stir Back Extrusion. Friction Stir Back Extrusion is a novel technique that is proposed recently and designed for fabricating tubes from lightweight alloys. Some preliminary results have been reported regarding microstructure and mechanical properties of Friction Stir Back Extrusion processed AZ31 magnesium alloy, however, systematic study and in-depth investigations are still needed to understand the materials behaviors and underlying mechanisms when subjected to Friction Stir Back Extrusion, especially for age-hardenable Al alloys. In the present study, Friction Stir Back Extrusion processed AA6063-T5 and AA7075-T6 alloys are analyzed with respect to grain structure evolution, micro-texture change, recrystallization mechanisms, precipitation sequence as well as mechanical properties. Optical Microscopy, Electron Backscatter Diffraction, Transmission Electron Microscopy, Vickers Hardness measurements and uniaxial tensile tests are carried out to characterize the microstructural change as well as micro and macro mechanical properties of the processed tubes. Special attention is paid to the micro-texture evolution across the entire tube and dynamic recrystallization mechanisms that are responsible for grain refinement. Significant grain refinement has been observed near the processing zone while the tube wall is characterized by inhomogeneous grain structure across the thickness for both alloys. Dissolution of existing precipitates is noticed under the thermal hysterias imposed by

Women for women's health: Uganda.

PubMed

Andrews, C M

1996-01-01

The primary health care model targets social, political, and economic environments as key determinants of health for populations, as well as for individuals. If nursing in Uganda is to make a difference in health care outcomes and in the health of all Ugandans, nurses must look broadly at situations and be educated to practice primary health care nursing. After 14 years of civil war, Uganda is finally experiencing a period of reconstruction and rehabilitation: the whole infrastructure is undergoing a face-lift. Ugandan nurses recognize that their educational preparation has stagnated for many years and that it was not only the political unrest in their country that put them behind professionally. They realize that, given the new directions set by the government, they must become prepared to implement primary health care. They are demanding a university education so they may take their place alongside other health care providers prepared at the university level. Some of the most convincing arguments for a university program for nurses came from doctors at the university who spoke about the need to raise the standards of nursing practice, the quality of teachers, and the morale of practitioners. One nurse said: "If we lose hope for a BScN program, I think all the nurses will quit and we won't have any new students going into the profession." This program is designed to improve the health and well-being of all Ugandans, especially the most vulnerable groups of women and children in rural areas, through strengthening and expanding health services by targeting the educational preparation of nurses. Health planners in Uganda envision the professional nurse as key to the implementation of the national health policy of primary health care. University-educated nurses should be able to assess problems, make clinically sound decisions, and act appropriately within the scope of nursing practice. They should be able to interact and consult collegially with other health care

Uganda: Perfection of Post-Conflict Stability or Ticking Time Bomb

DTIC Science & Technology

2016-01-01

1 UGANDA: PERFECTION OF POST-CONFLICT STABILITY OR TICKING TIME BOMB ? By Kristin M. Pearson and Alex S. Pedersen, United States Air...Force Academy 2015 INSS RESEARCH PAPER 2016 2 UGANDA: PERFECTION OF POST-CONFLICT STABILITY OR TICKING TIME BOMB ? By Kristin M. Pearson and Alex...likely. “The area is a ticking time bomb without ongoing efforts. There’s an entire group of young men trained in military tactics that have said

Poly(ether ester) Ionomers as Water-Soluble Polymers for Material Extrusion Additive Manufacturing Processes.

PubMed

Pekkanen, Allison M; Zawaski, Callie; Stevenson, André T; Dickerman, Ross; Whittington, Abby R; Williams, Christopher B; Long, Timothy E

2017-04-12

Water-soluble polymers as sacrificial supports for additive manufacturing (AM) facilitate complex features in printed objects. Few water-soluble polymers beyond poly(vinyl alcohol) enable material extrusion AM. In this work, charged poly(ether ester)s with tailored rheological and mechanical properties serve as novel materials for extrusion-based AM at low temperatures. Melt transesterification of poly(ethylene glycol) (PEG, 8k) and dimethyl 5-sulfoisophthalate afforded poly(ether ester)s of sufficient molecular weight to impart mechanical integrity. Quantitative ion exchange provided a library of poly(ether ester)s with varying counterions, including both monovalent and divalent cations. Dynamic mechanical and tensile analysis revealed an insignificant difference in mechanical properties for these polymers below the melting temperature, suggesting an insignificant change in final part properties. Rheological analysis, however, revealed the advantageous effect of divalent countercations (Ca 2+ , Mg 2+ , and Zn 2+ ) in the melt state and exhibited an increase in viscosity of two orders of magnitude. Furthermore, time-temperature superposition identified an elevation in modulus, melt viscosity, and flow activation energy, suggesting intramolecular interactions between polymer chains and a higher apparent molecular weight. In particular, extrusion of poly(PEG 8k -co-CaSIP) revealed vast opportunities for extrusion AM of well-defined parts. The unique melt rheological properties highlighted these poly(ether ester) ionomers as ideal candidates for low-temperature material extrusion additive manufacturing of water-soluble parts.

Management of vaginal extrusion after tension-free vaginal tape procedure for urodynamic stress incontinence.

PubMed

Giri, Subhasis K; Sil, Debasri; Narasimhulu, Girish; Flood, Hugh D; Skehan, Mark; Drumm, John

2007-06-01

To report our experience in the management of vaginal extrusion after the tension-free vaginal tape (TVT) procedure for urodynamic stress incontinence. Five patients diagnosed with vaginal extrusion after a TVT procedure performed at our institution were identified. We reviewed the patients' records retrospectively. The interval from TVT placement to diagnosis, presenting symptoms and signs, duration of symptoms, diagnostic test findings, treatment, and postoperative results were recorded. Patients were followed up for at least 12 months. From January 2001 to June 2004, a total of 166 patients underwent the TVT procedure. Of these, 5 patients (3%) were diagnosed with isolated vaginal extrusion 4 to 40 months postoperatively. No cases of urethral or bladder erosion occurred in this series. The symptoms included vaginal discharge, pain, bleeding, and dyspareunia. The eroded margin of the vaginal mucosa was trimmed, mobilized, and closed over the tape with interrupted vertical mattress sutures in a single layer using 2-0 polyglactin 910 to avoid mucosal inversion. All patients remained symptom free without any evidence of defective healing or additional extrusion at a minimal follow-up of 12 months. Primary reclosure of the vaginal mucosa over the TVT tape is an effective first-line treatment option for vaginal extrusion without compromising continence. Patients undergoing the TVT procedure should be adequately counseled about the possibility of this complication and the available treatment options.

Effect of extrusion rate on morphology of Kaolin/PolyEtherSulfone (PESf) membrane precursor

NASA Astrophysics Data System (ADS)

Misaran, M. S.; Sarbatly, R.; Bono, A.; Rahman, M. M.

2016-11-01

This study aims to investigate the influence of apparent viscosity induced by spinneret geometry and extrusion rate on morphology of Kaolin/PESf hollow fiber membranes. Different extrusion rates at two different rheology properties were introduced on a straight and conical spinneret resulting in various shear rates. The hollow fiber membrane precursors were spun using the wet spinning method to decouple the effect of shear and elongation stress due to gravity stretched drawing. The morphology of the spun hollow fiber was observed under Scanning Electron Microscope (SEM) and the overall porosity were measured using mercury intrusion porosimeter. Shear rate and apparent viscosity at the tip of the spinneret annulus were simulated using a computational fluid dynamics package; solidworks floworks. Simulation data shows that extrusion rate increment increases the shear rate at the spinneret wall which in turn reduce the apparent viscosity; consistent with a non Newtonian shear thinning fluid behavior. Thus, the outer finger-like region grows as the shear rate increases. Also, overall porosity of hollow fiber membrane decreases with extrusion rate increment which is caused by better molecular orientation; resulting in denser hollow fiber membrane. Thin outer finger-like region is achieved at low shear experience of 109.55 s-1 via a straight spinneret. Increasing the extrusion rate; thus shear rate will cause outer finger-like region growth which is not desirable in a separation process.

Plasticity mechanism for copper extrusion in through-silicon vias for three-dimensional interconnects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Tengfei; Spinella, Laura; Im, Jay

2013-11-18

In this paper, we demonstrated the plasticity mechanism for copper (Cu) extrusion in through-silicon via structures under thermal cycling. The local plasticity was directly observed by synchrotron x-ray micro-diffraction near the top of the via with the amount increasing with the peak temperature. The Cu extrusion was confirmed by Atomic Force Microscopy (AFM) measurements and found to be consistent with the observed Cu plasticity behavior. A simple analytical model elucidated the role of plasticity during thermal cycling, and finite element analyses were carried out to confirm the plasticity mechanism as well as the effect of the via/Si interface. The modelmore » predictions were able to account for the via extrusions observed in two types of experiments, with one representing a nearly free sliding interface and the other a strongly bonded interface. Interestingly, the AFM extrusion profiles seemed to contour with the local grain structures near the top of the via, suggesting that the grain structure not only affects the yield strength of the Cu and thus its plasticity but could also be important in controlling the pop-up behavior and the statistics for a large ensemble of vias.« less

Delayed School Entry in Uganda

ERIC Educational Resources Information Center

Moyi, Peter

2011-01-01

Since 1997 Uganda has seen a large increase in school enrolment. Despite this increased enrolment, universal education has remained elusive. Many children enrol in school, but not at the recommended age, and they drop out before completing school. This article focuses on one of these problems--delayed school entry. What household factors are…

Development of expanded extrusion food products for an Advanced Life Support system.

PubMed

Zasypkin, D V; Lee, T C

1999-01-01

Extrusion processing was proposed to provide texture and to expand the variety of cereal food products in an isolated Advanced Life Support (ALS) system. Rice, wheat, and soy are the baseline crops selected for growing during long-term manned space missions. A Brabender single-screw laboratory extruder (model 2003, L/D 20:1), equipped with round nozzles of various lengths, was used as a prototype of a small-size extruder. Several concepts were tested to extend the variety and improve the quality of the products, to decrease environmental loads, and to promote processing stability. These concepts include: the blending of wheat and soybean flour, the extrusion of a coarser rice flour, separation of wheat bran, and optimization of the extruder nozzle design. An optimal nozzle length has been established for the extrusion of rice flour. Bran separating was necessary to improve the quality of wheat extrudates.

Science-based health innovation in Uganda: creative strategies for applying research to development.

PubMed

Kamunyori, Sheila; Al-Bader, Sara; Sewankambo, Nelson; Singer, Peter A; Daar, Abdallah S

2010-12-13

Uganda has a long history of health research, but still faces critical health problems. It has made a number of recent moves towards building science and technology capacity which could have an impact on local health, if innovation can be fostered and harnessed. Qualitative case study research methodology was used. Data were collected through reviews of academic literature and policy documents and through open-ended, face-to-face interviews with 30 people from across the science-based health innovation system, including government officials, researchers in research institutes and universities, entrepreneurs, international donors, and non-governmental organization representatives. Uganda has a range of institutions influencing science-based health innovation, with varying degrees of success. However, the country still lacks a coherent mechanism for effectively coordinating STI policy among all the stakeholders. Classified as a least developed country, Uganda has opted for exemptions from the TRIPS intellectual property protection regime that include permitting parallel importation and providing for compulsory licenses for pharmaceuticals. Uganda is unique in Africa in taking part in the Millennium Science Initiative (MSI), an ambitious though early-stage $30m project, funded jointly by the World Bank and Government of Uganda, to build science capacity and encourage entrepreneurship through funding industry-research collaboration. Two universities - Makerere and Mbarara - stand out in terms of health research, though as yet technology development and commercialization is weak. Uganda has several incubators which are producing low-tech products, and is beginning to move into higher-tech ones like diagnostics. Its pharmaceutical industry has started to create partnerships which encourage innovation. Science-based health product innovation is in its early stages in Uganda, as are policies for guiding its development. Nevertheless, there is political will for the

Teacher Competence and the Academic Achievement of Sixth Grade Students in Uganda

ERIC Educational Resources Information Center

Wamala, Robert; Seruwagi, Gerald

2013-01-01

The study investigates the influence of teacher competence on the academic achievement of sixth grade students in Uganda. The investigation is based on data sourced from the 2009 Southern African Consortium for Monitoring Education Quality (SACMEQ) survey comprising 5,148 records of sixth grade students enrolled in primary schools in Uganda. The…

Spectrophotometric determination of irrigant extrusion using passive ultrasonic irrigation, EndoActivator, or syringe irrigation.

PubMed

Rodríguez-Figueroa, Carolina; McClanahan, Scott B; Bowles, Walter R

2014-10-01

Sodium hypochlorite (NaOCl) irrigation is critical to endodontic success, and several new methods have been developed to improve irrigation efficacy (eg, passive ultrasonic irrigation [PUI] and EndoActivator [EA]). Using a novel spectrophotometric method, this study evaluated NaOCl irrigant extrusion during canal irrigation. One hundred fourteen single-rooted extracted teeth were decoronated to leave 15 mm of the root length for each tooth. Cleaning and shaping of the teeth were completed using standardized hand and rotary instrumentation to an apical file size #40/0.04 taper. Roots were sealed (not apex), and 54 straight roots (n = 18/group) and 60 curved roots (>20° curvature, n = 20/group) were included. Teeth were irrigated with 5.25% NaOCl by 1 of 3 methods: passive irrigation with needle, PUI, or EA irrigation. Extrusion of NaOCl was evaluated using a pH indicator and a spectrophotometer. Standard curves were prepared with known amounts of irrigant to quantify amounts in unknown samples. Irrigant extrusion was minimal with all methods, with most teeth showing no NaOCl extrusion in straight or curved roots. Minor NaOCl extrusion (1-3 μL) in straight roots or curved roots occurred in 10%-11% of teeth in all 3 irrigant methods. Two teeth in both the syringe irrigation and the EA group extruded 3-10 μL of NaOCl. The spectrophotometric method used in this study proved to be very sensitive while providing quantification of the irrigant levels extruded. Using the PUI or EA tip to within 1 mm of the working length appears to be fairly safe, but apical anatomy can vary in teeth to allow extrusion of irrigant. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Tailoring properties of commercially pure titanium by gradation extrusion

NASA Astrophysics Data System (ADS)

Bergmann, Markus; Rautenstrauch, Anja; Selbmann, René; de Oliveira, Raoni Barreto; Coelho, Rodrigo Santiago; Landgrebe, Dirk

2016-10-01

Commercially pure titanium (CP Ti) is of great importance in medical applications due to its attractive properties, such as high biocompatibility, excellent corrosion resistance and relatively low density and suitable stiffness. Compared to the commonly used Ti-6Al-4V alloy, its lower strength has to be increased. The most attractive approach is to subject CP Ti to severe plastic deformation (SPD) processes such as Equal Channel Angular Pressing (ECAP). The resulting decreased grain size in CP Ti yields a significant increase in hardness and strength. Common SPD-processes typically provide a uniform modification of the material. Their material efficiency and productivity are critical and limiting factors. A new approach is to tailor the material properties by using Gradation Extrusion, which produces a distinct gradient in microstructure and strength. The forming process combines a regular impact extrusion process and severe plastic deformation in the lateral area of the material. This efficient process can be integrated easily into forming process chains, for instance for dental implants. This paper presents the forming process and the applied die geometry. The results of numerical simulations are used to illustrate the potential of the process to modify and strengthen the titanium material. Experiments show that the material is successfully processed by gradation extrusion. By characterizing the hardness and its distribution within the formed parts the effects of the process are investigated.

Barriers and opportunities to implementation of sustainable e-Health programmes in Uganda: A literature review

PubMed Central

2017-01-01

Background Most developing countries, including Uganda, have embraced the use of e-Health and m-Health applications as a means to improve primary healthcare delivery and public health for their populace. In Uganda, the growth in the information and communications technology industry has benefited the rural communities and also created opportunities for new innovations, and their application into healthcare has reported positive results, especially in the areas of disease control and prevention through disease surveillance. However, most are mere proof-of-concepts, only demonstrated in use within a small context and lack sustainability. This study reviews the literature to understand e-Health’s current implementation status within Uganda and documents the barriers and opportunities to sustainable e-Health intervention programmes in Uganda. Methods A structured literature review of e-Health in Uganda was undertaken between May and December 2015 and was complemented with hand searching and a document review of grey literature in the form of policy documents and reports obtained online or from the Ministry of Health’s Resource Centre. Results The searches identified a total of 293 resources of which 48 articles met the inclusion criteria of being in English and describing e-Health implementation in Uganda. These were included in the study and were examined in detail. Conclusion Uganda has trialled several e-Health and m-Health solutions to address healthcare challenges. Most were donor funded, operated in silos and lacked sustainability. Various barriers have been identified. Evidence has shown that e-Health implementations in Uganda have lacked prior planning stages that the literature notes as essential, for example strategy and need readiness assessment. Future research should address these shortcomings prior to introduction of e-Health innovations. PMID:28582996

[Effect of extrusion on protein and starch bioavailability in corn and lima bean flour blends].

PubMed

Pérez-Navarrete, Cecilia; Betancur-Ancona, David; Casotto, Meris; Carmona, Andrés; Tovar, Juscelino

2007-09-01

Extrusion is used to produce crunchy expanded foods, such as snacks. The nutritional impact of this process has not been studied sufficiently. In this study, in vitro and in vivo protein and starch bioavailability was evaluated in both raw and extruded corn (Zea mays)(C) and lima bean (Phaseolus lunatus)(B) flour blends, prepared in 75C/25B and 50C/ 50B (p/p) proportions. These were processed with a Brabender extruder at 160 degrees C, 100 rpm and 15.5% moisture content. Proximate composition showed that in the extruded products protein and ash contents increased whereas the fat level decreased. In vitro protein digestibility was higher in the extrudates (82%) than in the raw flours (77%). Potentially available starch and resistant starch contents decreased with extrusion. The in vitro assays indicated that extrusion improved protein and starch availability in the studied blends. In vivo bioavailability was evaluated using the rice weevil (Sithophilus oryzae) as a biological model. The most descriptive biomarkers of the changes suggested by the in vivo tests were body protein content (increased by extrusion) and intestinal a-amylase activity (decreased by processing). Overall, results suggest that extrusion notably increases the nutritional quality of corn and lima bean flour blends.

Coal extrusion in the plastic state

NASA Technical Reports Server (NTRS)

England, C.; Ryason, P. R.

1977-01-01

Continuous feeding of coal in a compressing screw extruder is described as a method of introducing coal into pressurized systems. The method utilizes the property of many bituminous coals of softening at temperatures from 350 to 425 C. Coal is then fed, much in the manner of common thermoplastics, using screw extruders. Data on the viscosity and extruder parameters for extrusion of Illinois No. 6 coal are presented.

Bibliography of ceramic extrusion and plasticity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janney, M.A.; Vance, M.C.; Jordan, A.C.

A comprehensive bibliography of ceramic extrusion and plasticity has been compiled. Over 670 abstracts are included covering the period 1932 to 1984. Citations cover a wide range of interests from basic science investigations to engineering ''tips'' and include references to brick and tile, whitewares, technical ceramics, theoretical models, engineering analyses, forming, drying, and raw materials. In addition to the citations, there are numerous indices to make the bibliography easy to use.

Fate of Fusarium mycotoxins in maize flour and grits during extrusion cooking.

PubMed

Scudamore, Keith A; Guy, Robin C E; Kelleher, Brian; MacDonald, Susan J

2008-11-01

Extrusion technology is used widely in the manufacture of a range of breakfast cereals and snacks for human consumption and animal feeds. To minimise consumer exposure to mycotoxins, the levels of deoxynivalenol (DON) and zearalenone (ZON) in cereals/cereal products and fumonisins B(1) and B(2) (FB(1) and FB(2)) in maize are controlled by European Union legislation. Relatively few studies, however, have examined the loss of Fusarium mycotoxins during processing. The behaviour of FB(1), FB(2) and fumonisin B(3) (FB(3)), DON and ZON during extrusion of naturally contaminated maize flour and maize grits is examined using pilot-scale equipment. DON and ZON are relatively stable during extrusion cooking but the fumonisins are lost to varying degrees. There is some loss of ZON when present in low concentrations and extruded at higher moisture contents. The presence of additives, such as reducing sugars and sodium chloride, can also affect mycotoxin levels. Moisture content of the cereal feed during extrusion is important and has a greater effect than temperature, particularly on the loss of fumonisins at the lower moistures. The effects are complex and not easy to explain, although more energy input to the extruder is required for drier materials. However, on the basis of these studies, the relationship between the concentration of Fusarium toxins in the raw and finished product is toxin- and process-dependent.

Chromosomal Organization by an Interplay of Loop Extrusion and Compartment Interaction

NASA Astrophysics Data System (ADS)

Nuebler, Johannes; Fudenberg, Geoffrey; Imakaev, Maxim; Lu, Carolyn; Goloborodko, Anton; Abdennur, Nezar; Mirny, Leonid

The chromatin fiber in eukaryotic nuclei is far from being simply a confined but otherwise randomly arranged polymer. Rather, it shows a high degree of spatial organization on all length scales, from individual nucleosomes up to well-segregated chromosome territories. On intermediate scales, chromosome conformation capture techniques have revealed two ubiquitous modes of organization: an alternating structure of A/B compartments, where each type preferentially associates with other base pairs of its type, and, typically on a smaller scale, the formation of topologically associating domains (TADs) with increased association within each domain but not across boundaries. The mechanisms behind this organization are only beginning to emerge. We review how the model of active loop extrusion can explain in a unified way such diverse phenomena as TAD formation and mitotic compaction and segregation, and we address in particular to what extent the interplay of active loop extrusion and compartment structure is compatible with recent experiments that interfere with the loading of the proposed loop extrusion factor cohesin. 4D Nucleome.

Directing collagen fibers using counter-rotating cone extrusion.

PubMed

Hoogenkamp, Henk R; Bakker, Gert-Jan; Wolf, Louis; Suurs, Patricia; Dunnewind, Bertus; Barbut, Shai; Friedl, Peter; van Kuppevelt, Toin H; Daamen, Willeke F

2015-01-01

The bio-inspired engineering of tissue equivalents should take into account anisotropic morphology and the mechanical properties of the extracellular matrix. This especially applies to collagen fibrils, which have various, but highly defined, orientations throughout tissues and organs. There are several methods available to control the alignment of soluble collagen monomers, but the options to direct native insoluble collagen fibers are limited. Here we apply a controlled counter-rotating cone extrusion technology to engineer tubular collagen constructs with defined anisotropy. Driven by diverging inner and outer cone rotation speeds, collagen fibrils from bovine skin were extruded and precipitated onto mandrels as tubes with oriented fibers and bundles, as examined by second harmonic generation microscopy and quantitative image analysis. A clear correlation was found whereby the direction and extent of collagen fiber alignment during extrusion were a function of the shear forces caused by a combination of the cone rotation and flow direction. A gradual change in the fiber direction, spanning +50 to -40°, was observed throughout the sections of the sample, with an average decrease ranging from 2.3 to 2.6° every 10μm. By varying the cone speeds, the collagen constructs showed differences in elasticity and toughness, spanning 900-2000kPa and 19-35mJ, respectively. Rotational extrusion presents an enabling technology to create and control the (an)isotropic architecture of collagen constructs for application in tissue engineering and regenerative medicine. Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Comparison of apical extrusion of sodium hypochlorite using 4 different root canal irrigation techniques.

PubMed

İriboz, Emre; Bayraktar, Koral; Türkaydın, Dilek; Tarçın, Bilge

2015-03-01

We compared the apical extrusion of sodium hypochlorite delivered with a 27-G needle, self-adjusting file (SAF), passive ultrasonic irrigation, or the EndoVac system (SybronEndo, Orange, CA) during the instrumentation and final irrigation of root canals. Matched paired single-canal teeth were divided into 8 groups. The experimental groups were needle irrigation size #30 (NI30) and #50 (NI50), SAF size #30 (SAF30) and #50 (SAF50), passive ultrasonic irrigation size #30 (PUI30) and #50 (PUI50), and EndoVac size #30 (EV30) and #50 (EV50). Teeth were embedded in 0.2% agarose gel (pH = 7.4) containing 1 mL 0.1% m-Cresol purple (Sigma-Aldrich, St Louis, MO), which changes color at a pH level of 9.0. Root canals were irrigated with sodium hypochlorite and EDTA using 4 different techniques, and the amount of irrigant was controlled. Standardized digital photographs were taken 20 minutes after the first irrigant was used and were analyzed to determine the amount of extrusion (expressed as a percentage of total pixels). The amounts of apical extrusion obtained in the NI30, NI50, SAF30, SAF50, PUI30, PUI50, EV30, and EV50 groups were 30% (3/10), 50% (5/10), 20% (2/10), 70% (7/10), 40% (4/10), 40% (4/10), 10% (1/10), and 10% (1/10), respectively. The overall extrusion frequency, regardless of the apical preparation size, was 40% (8/20) for needle, 45% (9/20) for SAF, 40% (8/20) for ultrasonic irrigation, and 10% (2/20) for EndoVac. Although the SAF group showed more extrusion, the percentage of pixels was significantly higher in the needle irrigation group (P < .01). The EndoVac group showed significantly lower extrusion values than the other techniques in terms of the number of teeth and pixels (P < .05 and P < .01, respectively). The risk of apical extrusion is significantly lower with the EndoVac in comparison with the 3 other techniques. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

75 FR 17436 - Certain Aluminum Extrusions From China

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-06

...)] Certain Aluminum Extrusions From China AGENCY: United States International Trade Commission. ACTION... the United States is materially retarded, by reason of imports from China of certain aluminum... States at less than fair value and alleged to be subsidized by the Government of China. Unless the...

LINER FOR EXTRUSION BILLET CONTAINERS. Interim Technical Documentary Progress Report, May 4-August 4, 1963

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spachner, S.A.

1964-10-31

Rokide-process alumina and zirconia coatings and a Udimet 700 superalloy liner were evaluated by extrusion of 31/2-in. billets of Inconel 713C, Udimet 700, SAE 4340, PH15--7Mo, and TZM alloys, using rod extrusion dies of temperatures were in the 1900 to 2250 deg F and 2900 to 3600 deg F ranges. Both alumina and zirconia coatings provided adequate protection to the support tooling at temperatures to 3450 deg F. Alumina coatings showed wear at temperatures over 2900 deg F, but may be serviceable to 3450 deg F. Zirconia coatings showed erratic results. One coating did withstand extrusion at 3450 deg Fmore » without apparent wear. The Udimet 700 liner did not show wear at 2000 deg F, but did react with the TZM billet at 3600 deg F. T-section die design was modified to prevent die cracking during extrusion and reduce coating grinding costs. (auth)« less

Dismantling reified African culture through localised homosexualities in Uganda.

PubMed

Nyanzi, Stella

2013-01-01

Uganda's Anti-Homosexuality Bill of 2009 aimed at protecting the cherished culture of the people against emergent threats to the traditional heterosexual family. The Bill's justification, however, lay in myopic imaginings of a homogenous African-ness and pedestrian oblivion to pluralities within African sexualities. This paper revisits the debate that homosexuality is 'un-African'. Rhetoric analysis of the Anti-Homosexuality Bill exposes how dominant discourses of law, medicine, religion, geography and culture reinforce the view that homosexuality is foreign to Africa. Based on ethnography in contemporary Uganda, I explore how self-identified same-sex-loving individuals simultaneously claim their African-ness and their homosexuality. Their strategies include ethnic belonging, membership to kinship structures, making connections with pre-colonial histories of homosexuality, civic participation in democratic processes, national identity, organising of lesbian, gay, bisexual, transgender, intersex and questioning support groups, language and nomenclature, visibility and voice in local communal activities, solidarity and adherence to cultural rituals. In present-day Uganda, same-sex-loving men, women and transgender people variously assert their African-ness.

Optimized manufacture of nuclear fuel cladding tubes by FEA of hot extrusion and cold pilgering processes

NASA Astrophysics Data System (ADS)

Gaillac, Alexis; Ly, Céline

2018-05-01

Within the forming route of Zirconium alloy cladding tubes, hot extrusion is used to deform the forged billets into tube hollows, which are then cold rolled to produce the final tubes with the suitable properties for in-reactor use. The hot extrusion goals are to give the appropriate geometry for cold pilgering, without creating surface defects and microstructural heterogeneities which are detrimental for subsequent rolling. In order to ensure a good quality of the tube hollows, hot extrusion parameters have to be carefully chosen. For this purpose, finite element models are used in addition to experimental tests. These models can take into account the thermo-mechanical coupling conditions obtained in the tube and the tools during extrusion, and provide a good prediction of the extrusion load and the thermo-mechanical history of the extruded product. This last result can be used to calculate the fragmentation of the microstructure in the die and the meta-dynamic recrystallization after extrusion. To further optimize the manufacturing route, a numerical model of the cold pilgering process is also applied, taking into account the complex geometry of the tools and the pseudo-steady state rolling sequence of this incremental forming process. The strain and stress history of the tube during rolling can then be used to assess the damage risk thanks to the use of ductile damage models. Once validated vs. experimental data, both numerical models were used to optimize the manufacturing route and the quality of zirconium cladding tubes. This goal was achieved by selecting hot extrusion parameters giving better recrystallized microstructure that improves the subsequent formability. Cold pilgering parameters were also optimized in order to reduce the potential ductile damage in the cold rolled tubes.

Towards reframing health service delivery in Uganda: the Uganda Initiative for Integrated Management of Non-Communicable Diseases.

PubMed

Schwartz, Jeremy I; Dunkle, Ashley; Akiteng, Ann R; Birabwa-Male, Doreen; Kagimu, Richard; Mondo, Charles K; Mutungi, Gerald; Rabin, Tracy L; Skonieczny, Michael; Sykes, Jamila; Mayanja-Kizza, Harriet

2015-01-01

The burden of non-communicable diseases (NCDs) in low- and middle-income countries (LMICs) is accelerating. Given that the capacity of health systems in LMICs is already strained by the weight of communicable diseases, these countries find themselves facing a double burden of disease. NCDs contribute significantly to morbidity and mortality, thereby playing a major role in the cycle of poverty, and impeding development. Integrated approaches to health service delivery and healthcare worker (HCW) training will be necessary in order to successfully combat the great challenge posed by NCDs. In 2013, we formed the Uganda Initiative for Integrated Management of NCDs (UINCD), a multidisciplinary research collaboration that aims to present a systems approach to integrated management of chronic disease prevention, care, and the training of HCWs. Through broad-based stakeholder engagement, catalytic partnerships, and a collective vision, UINCD is working to reframe integrated health service delivery in Uganda.

Medial Meniscal Extrusion Relates to Cartilage Loss in Specific Femorotibial Subregions- Data from the Osteoarthritis Initiative

PubMed Central

Bloecker, K.; Wirth, W.; Guermazi, A.; Hunter, DJ; Resch, H.; Hochreiter, J.; Eckstein, F.

2015-01-01

Objective Medial meniscal extrusion is known to be related to structural progression of knee OA. However, it is unclear whether medial meniscal extrusion is more strongly associated with cartilage loss in certain medial femorotibial subregions than to others. Methods Segmentation of the medial tibial and femoral cartilage (baseline; 1-year follow-up) and the medial meniscus (baseline) was performed in 60 participants with frequent knee pain (age 61.3±9.2y, BMI 31.3±3.9 kg/m2) and with unilateral medial radiographic joint space narrowing (JSN) grade 1–3, using double echo steady state MR-images. Medial meniscal extrusion distance and extrusion area (%) between the external meniscal and tibial margin at baseline, and longitudinal medial cartilage loss in eight anatomical subregions were determined. Results A significant association (Pearson correlation coefficient) was seen between medial meniscus extrusion area in JSN knees and cartilage loss over one year throughout the entire medial femorotibial compartment. The strongest correlation was with cartilage loss in the external medial tibia (r=−0.34 [p<0.01] in JSN, and r=−0.30 [p=0.02] in noJSN knees). Conclusion Medial meniscus extrusion was associated with subsequent medial cartilage loss. The external medial tibial cartilage may be particularly vulnerable to thinning once the meniscus extrudes and its surface is “exposed” to direct, non-physiological, cartilage-cartilage contact. PMID:25988986

Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing.

PubMed

Li, Qijun; Guan, Xiaoying; Cui, Mengsuo; Zhu, Zhihong; Chen, Kai; Wen, Haoyang; Jia, Danyang; Hou, Jian; Xu, Wenting; Yang, Xinggang; Pan, Weisan

2018-01-15

Three dimensional (3D) extrusion-based printing is a paste-based rapid prototyping process, which is capable of building complex 3D structures. The aim of this study was to explore the feasibility of 3D extrusion-based printing as a pharmaceutical manufacture technique for the fabrication of gastro-floating tablets. Novel low-density lattice internal structure gastro-floating tablets of dipyridamole were developed to prolong the gastric residence time in order to improve drug release rate and consequently, improve bioavailability and therapeutic efficacy. Excipients commonly employed in the pharmaceutical study could be efficiently applied in the room temperature 3D extrusion-based printing process. The tablets were designed with three kinds of infill percentage and prepared by hydroxypropyl methylcellulose (HPMC K4M) and hydroxypropyl methylcellulose (HPMC E15) as hydrophilic matrices and microcrystalline cellulose (MCC PH101) as extrusion molding agent. In vitro evaluation of the 3D printed gastro-floating tablets was performed by determining mechanical properties, content uniformity, and weight variation. Furthermore, re-floating ability, floating duration time, and drug release behavior were also evaluated. Dissolution profiles revealed the relationship between infill percentage and drug release behavior. The results of this study revealed the potential of 3D extrusion-based printing to fabricate gastro-floating tablets with more than 8h floating process with traditional pharmaceutical excipients and lattice internal structure design. Copyright © 2017. Published by Elsevier B.V.

Intimate Partner Violence Attitudes and Experience among Women and Men in Uganda

ERIC Educational Resources Information Center

Speizer, Ilene S.

2010-01-01

This study examines intimate partner violence (IPV) attitudes and experience among women and men in Uganda to inform IPV-prevention programs in the region. Nationally representative population-based data from women aged 15 to 49 and men aged 15 to 54 were collected between May and October 2006 as part of the Uganda Demographic and Health Survey.…

Extent and mechanism of phase separation during the extrusion of calcium phosphate pastes.

PubMed

O'Neill, Rory; McCarthy, Helen O; Cunningham, Eoin; Montufar, Edgar; Ginebra, Maria-Pau; Wilson, D Ian; Lennon, Alex; Dunne, Nicholas

2016-02-01

The aim of this study was to increase understanding of the mechanism and dominant drivers influencing phase separation during ram extrusion of calcium phosphate (CaP) paste for orthopaedic applications. The liquid content of extrudate was determined, and the flow of liquid and powder phases within the syringe barrel during extrusion were observed, subject to various extrusion parameters. Increasing the initial liquid-to-powder mass ratio, LPR, (0.4-0.45), plunger rate (5-20 mm/min), and tapering the barrel exit (45°-90°) significantly reduced the extent of phase separation. Phase separation values ranged from (6.22 ± 0.69 to 18.94 ± 0.69 %). However altering needle geometry had no significant effect on phase separation. From powder tracing and liquid content determination, static zones of powder and a non-uniform liquid distribution was observed within the barrel. Measurements of extrudate and paste LPR within the barrel indicated that extrudate LPR remained constant during extrusion, while LPR of paste within the barrel decreased steadily. These observations indicate the mechanism of phase separation was located within the syringe barrel. Therefore phase separation can be attributed to either; (1) the liquid being forced downstream by an increase in pore pressure as a result of powder consolidation due to the pressure exerted by the plunger or (2) the liquid being drawn from paste within the barrel, due to suction, driven by dilation of the solids matrix at the barrel exit. Differentiating between these two mechanisms is difficult; however results obtained suggest that suction is the dominant phase separation mechanism occurring during extrusion of CaP paste.

NATIONAL FRAMEWORK FOR THE SUSTAINABILITY OF HEALTH KNOWLEDGE TRANSLATION INITIATIVES IN UGANDA.

PubMed

Basaza, Robert; Kinegyere, Alison; Mutatina, Boniface; Sewankambo, Nelson

2018-01-01

The aim of this study was to provide evidence about the design and implementation of policies for advancing the sustainability of knowledge translation (KT) initiatives and policies in Uganda's health system. We searched for and reviewed evidence about KT sustainability issues in Uganda, the impacts of options, barriers to implementing these options, and implementation strategies to address such barriers. In instances where the systematic reviews provided limited evidence, these were supplemented with relevant primary studies. Documents such as the government reports and unpublished literature were also included in the search. Key informant interviews and a policy dialogue were conducted, and an expert working group guided the study. The KT sustainability issues identified were: the absence of a specific unit within the health sector to coordinate and synthesize research; health worker not familiar with KT activities and not often used. Furthermore, Uganda lacks a mechanism to sustain its current national health frameworks or platforms, and does not have a system to ensure the sustained coordination of existing national health KT platforms. The policy options proposed include: (i) the identification of a KT champion; (ii) the establishment of an operational KT framework; (iii) KT capacity building for researchers and research users, as well as policy and decision makers. The sustainability of KT will be influenced by the prevailing context and concerns within healthcare both in Uganda and internationally. Furthermore, the availability of resources for KT advocacy, communication, and program design will impact on the sustainability of Uganda's KT activities.

Complex deformation routes for direct recycling aluminium alloy scrap via industrial hot extrusion

NASA Astrophysics Data System (ADS)

Paraskevas, Dimos; Kellens, Karel; Kampen, Carlos; Mohammadi, Amirahmad; Duflou, Joost R.

2018-05-01

This paper presents the final results of an industrial project, aiming for direct hot extrusion of wrought aluminium alloy scrap at an industrial scale. Two types of complex deformation/extrusion routes were tested for the production of the same profile, starting from AA6060 scrap in form of machining chips. More specifically scrap-based billets were extruded through: a 2-porthole and a 4-porthole die-set, modified for enhanced scrap consolidation and grain refinement. For comparison reasons, cast billets of the same alloy were extruded through the modified 2-porthole die set. The tensile testing results as well as microstructural investigations show that the 4-porthole extrusion route further improves scrap consolidation compared to the 2-porthole die output. The successful implementation of solid state recycling, directly at industrial level, indicates the technological readiness level of this research.

Open access, open education resources and open data in Uganda.

PubMed

Salvo, Ivana Di; Mwoka, Meggie; Kwaga, Teddy; Rukundo, Priscilla Aceng; Ernest, Dennis Ssesanga; Osaheni, Louis Aikoriogie; John, Kasibante; Shafik, Kasirye; de Sousa, Agostinho Moreira

2015-01-01

As a follow up to OpenCon 2014, International Federation of Medical Students' Associations (IFMSA) students organized a 3 day workshop Open Access, Open Education Resources and Open Data in Kampala from 15-18 December 2014. One of the aims of the workshop was to engage the Open Access movement in Uganda which encompasses the scientific community, librarians, academia, researchers and students. The IFMSA students held the workshop with the support of: Consortium for Uganda University Libraries (CUUL), The Right to Research Coalition, Electronic Information for Libraries (EIFL), Makerere University, International Health Sciences University (IHSU), Pan African Medical Journal (PAMJ) and the Centre for Health Human Rights and Development (CEHURD). All these organizations are based or have offices in Kampala. The event culminated in a meeting with the Science and Technology Committee of Parliament of Uganda in order to receive the support of the Ugandan Members of Parliament and to make a concrete change for Open Access in the country.

Structure-Property Correlations in Al-Li Alloy Integrally Stiffened Extrusions

NASA Technical Reports Server (NTRS)

Hales, Stephen J.; Hafley, Robert A.

2001-01-01

The objective of this investigation was to establish the relationship between mechanical property anisotropy, microstructure and crystallographic texture in integrally 'T'-stiffened extruded panels fabricated from the Al-Li alloys 2195, 2098 and 2096. In-plane properties were measured as a function of orientation at two locations in the panels, namely mid-way between (Skin), and directly beneath (Base), the integral 'T' stiffeners. The 2195 extrusion exhibited the best combination of strength and toughness, but was the most anisotropic. The 2098 extrusion exhibited lower strength and comparable toughness, but was more isotropic than 2195. The 2096 extrusion exhibited the lowest strength and poor toughness, but was the most isotropic. All three alloys exhibited highly elongated grain structures and similar location-dependent variations in grain morphology. The textural characteristics comprised a beta + <100> fiber texture, similar to rolled product, in the Skin regions and alpha <111> + <100> fiber texture, comparable to axisymmetric extruded product, in the Base regions. In an attempt to quantitatively correlate texture with yield strength anisotropy, the original 'full constraint' Taylor model and a variant of the 'relaxed constraint' model, explored by Wert et al., were applied to the data. A comparison of the results revealed that the Wert model was consistently more accurate than the Taylor model.

Multidrug and toxin extrusion proteins as transporters of antimicrobial drugs.

PubMed

Nies, Anne T; Damme, Katja; Schaeffeler, Elke; Schwab, Matthias

2012-12-01

Antimicrobial drugs are essential in the treatment of infectious diseases. A better understanding of transport processes involved in drug disposition will improve the predictability of drug-drug interactions with consequences for drug response. Multidrug And Toxin Extrusion (MATE; SLC47A) proteins are efflux transporters mediating the excretion of several antimicrobial drugs as well as other organic compounds into bile and urine, thereby contributing to drug disposition. This review summarizes current knowledge of the structural and molecular features of human MATE transporters including their functional role in drug transport with a specific focus on antimicrobial drugs. The PubMed database was searched using the terms "MATE1," "MATE-2K," "MATE2," "SLC47A1," "SLC47A2," and "toxin extrusion protein" (up to June 2012). MATE proteins have been recognized as important transporters mediating the final excretion step of cationic drugs into bile and urine. These include the antiviral drugs acyclovir, amprenavir, and ganciclovir, the antibiotics cephalexin, cephradine and levofloxacin, as well as the antimalarial agents chloroquine and quinine. It is therefore important to enhance our understanding of the role of MATEs in drug extrusion with particular emphasis on the functional consequences of genetic variants on disposition of these antimicrobial drugs.

Road traffic incidents in Uganda: a systematic review of a five-year trend

PubMed Central

Balikuddembe, Joseph Kimuli; Ardalan, Ali; Khorasani-Zavareh, Davoud; Nejati, Amir; Munanura, Kasiima Stephen

2017-01-01

Abstract: Background: Over the years, Uganda has been one of the low and middle-income countries bearing the heaviest burden of road traffic incidents (RTI). Since the proclamation of the United Nations Decade of Action for Road Safety 2011 – 2020, a number of measures have been taken to reduce the burden. However, they ought to be premised on existing evidence-based research; therefore, the present review ventures to report the most recent five-year trend of RTI in Uganda. Methods: Based on Preferred Reporting Items for Systematic Reviews and Meta-Data Analysis (PRISMA) guidelines, a systematic review was employed. Using a thematic analysis, the articles were grouped into: trauma etiology, trauma care, mortality, cost, trauma registry and communication, intervention and treatment for final analysis. Results: Of the nineteen articles that were identified to be relevant to the study, the etiology of RTI was inevitably observed to be an important cause of injuries in Uganda. The risk factors cut across: the crash type, injury physiology, cause, victims, setting, age, economic status, and gender. All studies that were reviewed have advanced varying recommendations aimed at responding to the trend of RTIs in Uganda, of which some are in tandem with the five pillars of the United Nations Decade of Action for Road Safety 2011 – 2020. Conclusions: Peripheral measures of the burden of RTIs in Uganda were undertaken within a five-year timeframe (2011-2015) of implementing the United Nations Decade of Action for Road Safety. The measures however, ought to be scaled-up on robust evidence based research available from all the concerned stakeholders beyond Kampala or central region to other parts of Uganda. PMID:28039687

Medial extrusion of the posterior segment of medial meniscus is a sensitive sign for posterior horn tears.

PubMed

Ohishi, Tsuyoshi; Suzuki, Daisuke; Yamamoto, Kazufumi; Banno, Tomohiro; Shimizu, Yuta; Matsuyama, Yukihiro

2014-01-01

To evaluate medial extrusion of the posterior segment of the medial meniscus in posterior horn tears. This study enrolled 72 patients without medial meniscal tears (group N), 72 patients with medial meniscal tears without posterior horn tears (group PH-), 44 patients with posterior horn tears of the medial meniscus (group PH+). All meniscal tears were confirmed by arthroscopy. Medial extrusion of the middle segment and the posterior segment was measured on coronal MRIs. Extrusions of both middle and posterior segments in groups PH- and PH+ (middle segment; 2.94±1.51 mm for group PH- and 3.75±1.69 mm for group PH+, posterior segment; 1.85±1.82 mm for group PH- and 4.59±2.74 mm for group PH+) were significantly larger than those in group N (middle segment; 2.04±1.20, posterior segment; 1.21±1.86). Both indicators of extrusion in group PH+ were larger than those in group PH-. In the early OA category, neither middle nor posterior segment in group PH- extruded more than in group N. However, only the posterior segment in group PH+ extruded significantly more than in group N. Multiple lineal regression analyses revealed that posterior segment extrusion was strongly correlated with the posterior horn tears (p<0.001) among groups PH- and PH+. The newly presented indicator for extrusion of the posterior segment of the medial meniscus is associated with posterior horn tears in comparison with the extrusion of the middle segment, especially in the early stages of osteoarthritis. Level II--Diagnostic Study. Copyright © 2013 Elsevier B.V. All rights reserved.

Science-based health innovation in Uganda: creative strategies for applying research to development

PubMed Central

2010-01-01

Background Uganda has a long history of health research, but still faces critical health problems. It has made a number of recent moves towards building science and technology capacity which could have an impact on local health, if innovation can be fostered and harnessed. Methods Qualitative case study research methodology was used. Data were collected through reviews of academic literature and policy documents and through open-ended, face-to-face interviews with 30 people from across the science-based health innovation system, including government officials, researchers in research institutes and universities, entrepreneurs, international donors, and non-governmental organization representatives. Results Uganda has a range of institutions influencing science-based health innovation, with varying degrees of success. However, the country still lacks a coherent mechanism for effectively coordinating STI policy among all the stakeholders. Classified as a least developed country, Uganda has opted for exemptions from the TRIPS intellectual property protection regime that include permitting parallel importation and providing for compulsory licenses for pharmaceuticals. Uganda is unique in Africa in taking part in the Millennium Science Initiative (MSI), an ambitious though early-stage $30m project, funded jointly by the World Bank and Government of Uganda, to build science capacity and encourage entrepreneurship through funding industry-research collaboration. Two universities – Makerere and Mbarara – stand out in terms of health research, though as yet technology development and commercialization is weak. Uganda has several incubators which are producing low-tech products, and is beginning to move into higher-tech ones like diagnostics. Its pharmaceutical industry has started to create partnerships which encourage innovation. Conclusions Science-based health product innovation is in its early stages in Uganda, as are policies for guiding its development

Extrusion of Debris from Primary Molar Root Canals following Instrumentation with Traditional and New File Systems.

PubMed

Thakur, Bhagyashree; Pawar, Ajinkya M; Kfir, Anda; Neelakantan, Prasanna

2017-11-01

To assess the amount of debris extruded apically during instrumentation of distal canals of extracted primary molars by three instrument systems [ProTaper Universal (PTU), ProTaper NEXT (PTN), and self-adjusting file (SAF)] compared with conventional stainless steel hand K-files (HF, control). Primary mandibular molars (n = 120) with a single distal canal were selected and randomly divided into four groups (n = 30) for root canal instrumentation using group I, HF (to size 0.30/0.02 taper), group II, PTU (to size F3), group III, PTN (to size X3), and group IV, SAF. Debris extruded during instrumentation was collected in preweighed Eppendorf tubes, stored in an incubator at 70°C for 5 days and then weighed. Statistical analysis was performed by one-way analysis of variance (ANOVA), followed by Turkey's post hoc test (p = 0.05). All the groups resulted in extrusion of debris. There was statistically significant difference (p < 0.001) in the debris extrusion between the three groups: HF (0.00133 ± 0.00012), PTU (0.00109 ± 0.00005), PTN (0.00052 ± 0.00008), and SAF (0.00026 ± 0.00004). Instrumentation with SAF resulted in the least debris extrusion when used for shaping root canals of primary molar teeth. Debris extrusion in primary teeth poses an adverse effect on the stem cells and may also alter the permanent dental germ. Debris extrusion is rarely reported for primary teeth and it is important for the clinician to know which endodontic instrumentation leads to less extrusion of debris.

Towards reframing health service delivery in Uganda: the Uganda Initiative for Integrated Management of Non-Communicable Diseases

PubMed Central

Schwartz, Jeremy I.; Dunkle, Ashley; Akiteng, Ann R.; Birabwa-Male, Doreen; Kagimu, Richard; Mondo, Charles K.; Mutungi, Gerald; Rabin, Tracy L.; Skonieczny, Michael; Sykes, Jamila; Mayanja-Kizza, Harriet

2015-01-01

Background The burden of non-communicable diseases (NCDs) in low- and middle-income countries (LMICs) is accelerating. Given that the capacity of health systems in LMICs is already strained by the weight of communicable diseases, these countries find themselves facing a double burden of disease. NCDs contribute significantly to morbidity and mortality, thereby playing a major role in the cycle of poverty, and impeding development. Methods Integrated approaches to health service delivery and healthcare worker (HCW) training will be necessary in order to successfully combat the great challenge posed by NCDs. Results In 2013, we formed the Uganda Initiative for Integrated Management of NCDs (UINCD), a multidisciplinary research collaboration that aims to present a systems approach to integrated management of chronic disease prevention, care, and the training of HCWs. Discussion Through broad-based stakeholder engagement, catalytic partnerships, and a collective vision, UINCD is working to reframe integrated health service delivery in Uganda. PMID:25563451

The complexities of educating nurses in Uganda.

PubMed

Andrews, C M; Rottman, C J; Lematia, R M

1996-01-01

Imagine that you are a woman living in rural Uganda. Your husband has returned to the city to work as a manual labourer. With a toddler playing alongside, you work long hot hours in the field to provide for your family. For weeks you have run a low-grade fever which you suspect is related to your advancing pregnancy. As traditional medicines have provided no relief, you sacrifice a day in the field and wait in line for care at a medical clinic outpost that is staffed one day a week. Nearing your turn, you hear a rumour that the government now requires payment in advance for care. As you and most of the others waiting in line do not have money, you leave together and arrange to pool resources from a community project so that you can all return to the clinic next week. Your pain increases and your productivity goes down. When the clinic day finally comes, the nurse does not show up because her own children need food and she prefers to earn ready cash by selling crafts in the market rather than work at the clinic for barely subsistence pay. The story does not end here, nor does that of countless other women in Uganda, including the caregivers. The difficulties are ongoing. And meeting health needs in Uganda as in many countries in Sub-Sahara Africa is complex and challenging.

Postgraduate training for trauma prevention, injury surveillance and research, Uganda.

PubMed

Bachani, Abdulgafoor M; Paichadze, Nino; Bentley, Jacob A; Tumwesigye, Nazarius Mbona; Bishai, David; Atuyambe, Lynn; Wegener, Stephen; Guwatudde, David; Kobusingye, Olive C; Hyder, Adnan A

2018-06-01

The burden of trauma and injuries in Uganda is substantial and growing. Two important gaps that need addressing are the shortage of trained people and a lack of national data on noncommunicable diseases and their risk factors in Uganda. We developed and implemented a new track within an existing master of public health programme, aimed at developing graduate-level capacity and promoting research on key national priorities for trauma and injuries. We also offered training opportunities to a wider audience and set up a high-level national injury forum to foster national dialogue on addressing the burden of trauma, injuries and disability. The Chronic Consequences of Trauma, Injuries and Disability in Uganda programme was implemented in 2012 at Makerere University School of Public Health in Kampala, Uganda, in conjunction with Johns Hopkins Bloomberg School of Public Health in Baltimore, United States of America. Over the years 2012 to 2017 we supported four cohorts of master's students, with a total of 14 students (9 females and 5 males; mean age 30 years). Over 1300 individuals participated in workshops and seminars of the short-term training component of the programme. The forum hosted three research symposia and two national injury forums. Institutional support and collaborative engagement is important for developing and implementing successful capacity development programmes. Integration of training components within existing academic structures is key to sustainability. Appropriate mentorship for highly motivated and talented students is valuable for guiding students through the programme.

Factors Associated with Incomplete Reporting of HIV and AIDS by Uganda's Surveillance System

ERIC Educational Resources Information Center

Akankunda, Denis B.

2014-01-01

Background: Over the last 20 years, Uganda has piloted and implemented various management information systems (MIS) for better surveillance of HIV/AIDS. With support from the United States Government, Uganda introduced the District Health Information Software 2 (DHIS2) in 2012. However, districts have yet to fully adapt to this system given a…

Modeling the Formation of Transverse Weld during Billet-on-Billet Extrusion

PubMed Central

Mahmoodkhani, Yahya; Wells, Mary; Parson, Nick; Jowett, Chris; Poole, Warren

2014-01-01

A comprehensive mathematical model of the hot extrusion process for aluminum alloys has been developed and validated. The plasticity module was developed using a commercial finite element package, DEFORM-2D, a transient Lagrangian model which couples the thermal and deformation phenomena. Validation of the model against industrial data indicated that it gave excellent predictions of the pressure during extrusion. The finite element predictions of the velocity fields were post-processed to calculate the thickness of the surface cladding as one billet is fed in after another through the die (i.e., the transverse weld). The mathematical model was then used to assess the effect a change in feeder dimensions would have on the shape, thickness and extent of the transverse weld during extrusion. Experimental measurements for different combinations of billet materials show that the model is able to accurately predict the transverse weld shape as well as the clad surface layer to thicknesses of 50 μm. The transverse weld is significantly affected by the feeder geometry shape, but the effects of ram speed, billet material and temperature on the transverse weld dimensions are negligible. PMID:28788629

Does apical negative pressure prevent the apical extrusion of debris and irrigant compared with conventional irrigation? A systematic review and meta-analysis.

PubMed

Romualdo, Priscilla Coutinho; de Oliveira, Katharina Morant Holanda; Nemezio, Mariana Alencar; Küchler, Erika Calvano; Silva, Raquel Assed Bezerra; Nelson-Filho, Paulo; Silva, Lea Assed Bezerra

2017-12-01

The aim of this study was to evaluate if apical negative pressure (ANP) irrigation prevents the apical extrusion of debris and irrigant compared with conventional needle irrigation through a systematic review and meta-analysis. A computer search of dental literature was performed using four different databases. A combination of the terms 'apical negative pressure', 'endovac', 'apical extrusion', 'extrusion' and 'endodontics' was used. Studies that used extracted human teeth with a mature apex and that evaluated the apical extrusion of debris and/or irrigating solution were included. After an evaluation of the full studies according to the eligibility criteria, eight studies were critically analysed and subjected to quality assessment and risk of bias. Only four studies that evaluated extrusion of irrigant were considered as having high methodological quality and were subjected to a meta-analysis. Studies evaluating extrusion of debris did not have sufficient methodological quality to be subjected to the meta-analysis. The forest plot indicated that ANP irrigation prevents the risk of irrigant extrusion compared with conventional irrigation (OR 0.07 [95%CI 0.02-0.20]; P < 0.00001). This systematic review and meta-analysis showed that ANP prevents the apical extrusion of irrigant. There is no evidence if this type of irrigation prevents the extrusion of debris. © 2017 Australian Society of Endodontology Inc.

Magma transport in sheet intrusions of the Alnö carbonatite complex, central Sweden.

PubMed

Andersson, Magnus; Almqvist, Bjarne S G; Burchardt, Steffi; Troll, Valentin R; Malehmir, Alireza; Snowball, Ian; Kübler, Lutz

2016-06-10

Magma transport through the Earth's crust occurs dominantly via sheet intrusions, such as dykes and cone-sheets, and is fundamental to crustal evolution, volcanic eruptions and geochemical element cycling. However, reliable methods to reconstruct flow direction in solidified sheet intrusions have proved elusive. Anisotropy of magnetic susceptibility (AMS) in magmatic sheets is often interpreted as primary magma flow, but magnetic fabrics can be modified by post-emplacement processes, making interpretation of AMS data ambiguous. Here we present AMS data from cone-sheets in the Alnö carbonatite complex, central Sweden. We discuss six scenarios of syn- and post-emplacement processes that can modify AMS fabrics and offer a conceptual framework for systematic interpretation of magma movements in sheet intrusions. The AMS fabrics in the Alnö cone-sheets are dominantly oblate with magnetic foliations parallel to sheet orientations. These fabrics may result from primary lateral flow or from sheet closure at the terminal stage of magma transport. As the cone-sheets are discontinuous along their strike direction, sheet closure is the most probable process to explain the observed AMS fabrics. We argue that these fabrics may be common to cone-sheets and an integrated geology, petrology and AMS approach can be used to distinguish them from primary flow fabrics.

Magma transport in sheet intrusions of the Alnö carbonatite complex, central Sweden

PubMed Central

Andersson, Magnus; Almqvist, Bjarne S. G.; Burchardt, Steffi; Troll, Valentin R.; Malehmir, Alireza; Snowball, Ian; Kübler, Lutz

2016-01-01

Magma transport through the Earth’s crust occurs dominantly via sheet intrusions, such as dykes and cone-sheets, and is fundamental to crustal evolution, volcanic eruptions and geochemical element cycling. However, reliable methods to reconstruct flow direction in solidified sheet intrusions have proved elusive. Anisotropy of magnetic susceptibility (AMS) in magmatic sheets is often interpreted as primary magma flow, but magnetic fabrics can be modified by post-emplacement processes, making interpretation of AMS data ambiguous. Here we present AMS data from cone-sheets in the Alnö carbonatite complex, central Sweden. We discuss six scenarios of syn- and post-emplacement processes that can modify AMS fabrics and offer a conceptual framework for systematic interpretation of magma movements in sheet intrusions. The AMS fabrics in the Alnö cone-sheets are dominantly oblate with magnetic foliations parallel to sheet orientations. These fabrics may result from primary lateral flow or from sheet closure at the terminal stage of magma transport. As the cone-sheets are discontinuous along their strike direction, sheet closure is the most probable process to explain the observed AMS fabrics. We argue that these fabrics may be common to cone-sheets and an integrated geology, petrology and AMS approach can be used to distinguish them from primary flow fabrics. PMID:27282420

Orthodontic extrusion of Ellis Class VIII fracture of maxillary lateral incisor - The sling shot method.

PubMed

Felicita, A Sumathi

2018-07-01

The aim of this paper is to evaluate the efficacy of forced extrusion using the sling shot elastic. A 21 year adult patient reported with an Ellis Class VIII fracture of the maxillary right lateral incisor. Root canal treatment followed by a fiber reinforced composite post was placed and core build up was done. A metal button was bonded to the tooth. Begg brackets were placed from the second premolar on one side to the second premolar on the opposite side. 0.016″ × 0.025″ stainless steel was placed in ribbon mode. The ligature wire was placed as a sling shot from the button on the fractured tooth to the two adjacent teeth. 4 mm of extrusion was achieved and there was no evidence of root resorption. Forced extrusion was achieved in four months. The sling shot method is a very effective method of ligation. Light forces are delivered over a long duration with definitive results as compared to the inconsistent force delivery with conventional extrusion mechanics.

Development of an Ointment Formulation Using Hot-Melt Extrusion Technology.

PubMed

Bhagurkar, Ajinkya M; Angamuthu, Muralikrishnan; Patil, Hemlata; Tiwari, Roshan V; Maurya, Abhijeet; Hashemnejad, Seyed Meysam; Kundu, Santanu; Murthy, S Narasimha; Repka, Michael A

2016-02-01

Ointments are generally prepared either by fusion or by levigation methods. The current study proposes the use of hot-melt extrusion (HME) processing for the preparation of a polyethylene glycol base ointment. Lidocaine was used as a model drug. A modified screw design was used in this process, and parameters such as feeding rate, barrel temperature, and screw speed were optimized to obtain a uniform product. The product characteristics were compared with an ointment of similar composition prepared by conventional fusion method. The rheological properties, drug release profile, and texture characteristics of the hot-melt extruded product were similar to the conventionally prepared product. This study demonstrates a novel application of the hot-melt extrusion process in the manufacturing of topical semi-solids.

Causes and Mitigation of Fuel Pilot Operated Valve Pilot Seal Extrusion in Space Shuttle Orbiter Primary RCS Thrusters

NASA Technical Reports Server (NTRS)

Waller, Jess M.; Roth, Tim E.; Saulsberry, Regor L.; Haney, William A.; Kelly, Terence S; Forsyth, Bradley S.

2004-01-01

Extrusion of a polytetrafluoroethylene (PTFE) pilot seal located in the Space Shuttle Orbiter Primary Reaction Control Subsystem (PRCS) thruster fuel valve has been implicated in 68 ground and on-orbit fuel valve failures. A rash of six extrusion-related in-flight anomalies over a six-mission span from December 2001 to October 2002 led to heightened activity at various NASA centers, and the formation of a multidisciplinary team to solve the problem. Empirical and theoretical approaches were used. For example, thermomechanical analysis (TMA) and exposure tests showed that some extrusion is produced by thermal cycling; however, a review of thruster service histories did not reveal a strong link between thermal cycling and extrusion. Calculations showed that the amount of observed extrusion often exceeded the amount allowed by thermally-induced stress relief. Failure analysis of failed hardware also revealed the presence of fuel-oxidizer reaction product (FORP) inside the fuel valve pilot seal cavity, and differential scanning calorimetry (DSC) showed that the FORP was intimately associated with the pilot seal material. Component-level exposure tests showed that FORP of similar composition could be produced by adjacent oxidizer valve leakage in the absence of thruster firing. Specific gravity data showed that extruded fuel valve pilot seals were less dense than new pilot seals or oxidizer valve pilot seals, indicating permanent modification of the PTFE occurred during service. It is concluded that some thermally-induced extrusion is unavoidable; however, oxidizer leakage-induced extrusion is mostly avoidable and can be mitigated. Several engineering level mitigation strategies are discussed.

Addressing HIV/AIDS challenges in Uganda: does social capital generation by NGOs matter?

PubMed

Muriisa, Roberts Kabeba; Jamil, Ishtiaq

2011-01-01

HIV/AIDS has had devastating impacts in many countries, Uganda in particular. However, Uganda is depicted as one of the most successful countries in fighting HIV/AIDS. Among others, Uganda's success story is attributed to the open general environment which allows open discussions surrounding HIV/AIDS when other countries such as South Africa and Kenya denied the existence of the disease in their countries. In addition, the success is attributed to the policy which allowed many actors to participate in the fight against the disease. The primary focus of this article is to map the process of social capital generation by NGOs and how social capital benefits enhance mitigation of HIV/AIDS challenges in Uganda. The key to social capital is nurturing relationships. In this regard, HIV/AIDS NGOs play a central role in the way individuals, groups and communities interact, and how various kinds of social relations are forged with people living with HIV/AIDS and especially for those who are HIV infected. NGOs' success in reducing the number of HIV/AIDS cases in Uganda is based on their abilities to generate social capital. This involves inclusion and building social networks and empowerment at the individual and community levels, and disseminating information to reduce social stigma as well as discrimination. We used a mixed-method strategy to collect data for this study. We used a structured questionnaire having quantitative and qualitative question sets which focused on different social capital measurement indicators. We used observations and in-depth face-to-face interviews. A major finding of the study is that the ways individuals and groups are connected and interact with each other are important mechanisms for alleviating HIV/AIDS challenges in Uganda.

Developing a Framework for Monitoring Child Poverty: Results from a Study in Uganda

ERIC Educational Resources Information Center

Witter, Sophie

2004-01-01

In 2002 Save the Children UK carried out a study of child poverty in Uganda, as part of the on-going Uganda Participatory Poverty Assessment Programme. Using participants from all regions of the country, the researchers asked children about their perceptions of poverty and anti-poverty strategies, as well as questioning adult key informants about…

Obesity as a form of malnutrition: over-nutrition on the Uganda "malnutrition" agenda.

PubMed

Ngaruiya, Christine; Hayward, Alison; Post, Lori; Mowafi, Hani

2017-01-01

The objectives were to highlight the burden of overweight and obesity as an additional area of importance for the malnutrition agenda in Uganda and to provide evidence-based considerations for stakeholders involved. Mirroring other Low- and Middle-Income Countries (LMICs), Uganda is experiencing a "double burden" of over-nutrition related issues - both obesity and overweight, and related non-communicable diseases (NCDs) alongside the under-nutrition that has long plagued the country. Despite the commonplace assumption that under-nutrition is the predominant form of malnutrition in Uganda, we explore recent literature that in fact, challenges this notion. While food insecurity has contributed to the under-nutrition problem, a lack of dietary diversity also has a demonstrated role in increasing over-nutrition. We cannot afford to ignore over-nutrition concomitant with stunting and wasting in the country. Increase in the burden of this less acknowledged form of malnutrition in Uganda is critical to investigate, and yet poorly understood. A move towards increased regionally targeted over-nutrition research, funding, government prioritization and advocacy is needed.

Potential cost-effectiveness of universal access to modern contraceptives in Uganda.

PubMed

Babigumira, Joseph B; Stergachis, Andy; Veenstra, David L; Gardner, Jacqueline S; Ngonzi, Joseph; Mukasa-Kivunike, Peter; Garrison, Louis P

2012-01-01

Over two thirds of women who need contraception in Uganda lack access to modern effective methods. This study was conducted to estimate the potential cost-effectiveness of achieving universal access to modern contraceptives in Uganda by implementing a hypothetical new contraceptive program (NCP) from both societal and governmental (Ministry of Health (MoH)) perspectives. A Markov model was developed to compare the NCP to the status quo or current contraceptive program (CCP). The model followed a hypothetical cohort of 15-year old girls over a lifetime horizon. Data were obtained from the Uganda National Demographic and Health Survey and from published and unpublished sources. Costs, life expectancy, disability-adjusted life expectancy, pregnancies, fertility and incremental cost-effectiveness measured as cost per life-year (LY) gained, cost per disability-adjusted life-year (DALY) averted, cost per pregnancy averted and cost per unit of fertility reduction were calculated. Univariate and probabilistic sensitivity analyses were performed to examine the robustness of results. Mean discounted life expectancy and disability-adjusted life expectancy (DALE) were higher under the NCP vs. CCP (28.74 vs. 28.65 years and 27.38 vs. 27.01 respectively). Mean pregnancies and live births per woman were lower under the NCP (9.51 vs. 7.90 and 6.92 vs. 5.79 respectively). Mean lifetime societal costs per woman were lower for the NCP from the societal perspective ($1,949 vs. $1,987) and the MoH perspective ($636 vs. $685). In the incremental analysis, the NCP dominated the CCP, i.e. it was both less costly and more effective. The results were robust to univariate and probabilistic sensitivity analysis. Universal access to modern contraceptives in Uganda appears to be highly cost-effective. Increasing contraceptive coverage should be considered among Uganda's public health priorities.

Potential Cost-Effectiveness of Universal Access to Modern Contraceptives in Uganda

PubMed Central

Babigumira, Joseph B.; Stergachis, Andy; Veenstra, David L.; Gardner, Jacqueline S.; Ngonzi, Joseph; Mukasa-Kivunike, Peter; Garrison, Louis P.

2012-01-01

Background Over two thirds of women who need contraception in Uganda lack access to modern effective methods. This study was conducted to estimate the potential cost-effectiveness of achieving universal access to modern contraceptives in Uganda by implementing a hypothetical new contraceptive program (NCP) from both societal and governmental (Ministry of Health (MoH)) perspectives. Methodology/Principal Findings A Markov model was developed to compare the NCP to the status quo or current contraceptive program (CCP). The model followed a hypothetical cohort of 15-year old girls over a lifetime horizon. Data were obtained from the Uganda National Demographic and Health Survey and from published and unpublished sources. Costs, life expectancy, disability-adjusted life expectancy, pregnancies, fertility and incremental cost-effectiveness measured as cost per life-year (LY) gained, cost per disability-adjusted life-year (DALY) averted, cost per pregnancy averted and cost per unit of fertility reduction were calculated. Univariate and probabilistic sensitivity analyses were performed to examine the robustness of results. Mean discounted life expectancy and disability-adjusted life expectancy (DALE) were higher under the NCP vs. CCP (28.74 vs. 28.65 years and 27.38 vs. 27.01 respectively). Mean pregnancies and live births per woman were lower under the NCP (9.51 vs. 7.90 and 6.92 vs. 5.79 respectively). Mean lifetime societal costs per woman were lower for the NCP from the societal perspective ($1,949 vs. $1,987) and the MoH perspective ($636 vs. $685). In the incremental analysis, the NCP dominated the CCP, i.e. it was both less costly and more effective. The results were robust to univariate and probabilistic sensitivity analysis. Conclusion/Significance Universal access to modern contraceptives in Uganda appears to be highly cost-effective. Increasing contraceptive coverage should be considered among Uganda's public health priorities. PMID:22363480

PKA-regulated VASP phosphorylation promotes extrusion of transformed cells from the epithelium

PubMed Central

Anton, Katarzyna A.; Sinclair, John; Ohoka, Atsuko; Kajita, Mihoko; Ishikawa, Susumu; Benz, Peter M.; Renne, Thomas; Balda, Maria; Matter, Karl; Fujita, Yasuyuki

2014-01-01

ABSTRACT At the early stages of carcinogenesis, transformation occurs in single cells within tissues. In an epithelial monolayer, such mutated cells are recognized by their normal neighbors and are often apically extruded. The apical extrusion requires cytoskeletal reorganization and changes in cell shape, but the molecular switches involved in the regulation of these processes are poorly understood. Here, using stable isotope labeling by amino acids in cell culture (SILAC)-based quantitative mass spectrometry, we have identified proteins that are modulated in transformed cells upon their interaction with normal cells. Phosphorylation of VASP at serine 239 is specifically upregulated in RasV12-transformed cells when they are surrounded by normal cells. VASP phosphorylation is required for the cell shape changes and apical extrusion of Ras-transformed cells. Furthermore, PKA is activated in Ras-transformed cells that are surrounded by normal cells, leading to VASP phosphorylation. These results indicate that the PKA–VASP pathway is a crucial regulator of tumor cell extrusion from the epithelium, and they shed light on the events occurring at the early stage of carcinogenesis. PMID:24963131

Effects of raw material extrusion and steam conditioning on feed pellet quality and nutrient digestibility of growing meat rabbits.

PubMed

Liao, Kuoyao; Cai, Jingyi; Shi, Zhujun; Tian, Gang; Yan, Dong; Chen, Delin

2017-06-01

This study was conducted to investigate the effects of raw material extrusion and steam conditioning on feed pellet quality and nutrient digestibility of growing meat rabbits, in order to determine appropriate rabbit feed processing methods and processing parameters. In Exp. 1, an orthogonal design was adopted. Barrel temperature, material moisture content and feed rate were selected as test factors, and acid detergent fiber (ADF) content was selected as an evaluation index to research the optimum extrusion parameters. In Exp. 2, a two-factor design was adopted. Four kinds of rabbit feeds were processed and raw material extrusion adopted optimum extrusion parameters of Exp. 1. A total of 40 healthy and 42-day-old rabbits with similar weight were used in a randomized design, which consisted of 4 groups and 10 replicates in each group (1 rabbits in each replicate). The adaptation period lasted for 7 d, and the digestion trial lasted for 4 d. The results showed as follows: 1) ADF was significantly affected by barrel temperature ( P  < 0.05); the optimum extrusion parameters were barrel temperature 125 °C, moisture content 16% and feed rate 9 Hz. 2) Raw material extrusion and steam conditioning both significantly decreased powder percentage, pulverization ratio and protein solubility ( P  < 0.05), significantly improved hardness and starch gelatinization degree of rabbit feed ( P  < 0.05). They both had significant interaction effects on the processing quality of rabbit feed ( P  < 0.05). 3) Extrusion significantly improved the apparent digestibility of dry matter and total energy ( P  < 0.05). Extrusion and steam conditioning both significantly improved the apparent digestibility of crude fiber (CF), ADF and NDF ( P  < 0.05), but they had no interaction effects on the apparent digestibility of rabbit feed. Thus, using extrusion and steam conditioning technology at the same time in the weaning rabbits feed processing can improve the pellet quality and

Hot melt extrusion of ion-exchange resin for taste masking.

PubMed

Tan, David Cheng Thiam; Ong, Jeremy Jianming; Gokhale, Rajeev; Heng, Paul Wan Sia

2018-05-30

Taste masking is important for some unpleasant tasting bioactives in oral dosage forms. Among many methods available for taste-masking, use of ion-exchange resin (IER) holds promise. IER combined with hot melt extrusion (HME) may offer additional advantages over solvent methods. IER provides taste masking by complexing with the drug ions and preventing drug dissolution in the mouth. Drug-IER complexation approaches described in literatures are mainly based either on batch processing or column eluting. These methods of drug-IER complexation have obvious limitations such as high solvent volume requirements, multiprocessing steps and extended processing time. Thus, the objective of this study was to develop a single-step, solvent-free, continuous HME process for complexation of drug-IER. The screening study evaluated drug to IER ratio, types of IER and drug complexation methods. In the screening study, a potassium salt of a weakly acidic carboxylate-based cationic IER was found suitable for the HME method. Thereafter, optimization study was conducted by varying HME process parameters such as screw speed, extrusion temperature and drug to IER ratio. It was observed that extrusion temperature and drug to IER ratio are imperative in drug-IER complexation through HME. In summary, this study has established the feasibility of a continuous complexation method for drug to IER using HME for taste masking. Copyright © 2018 Elsevier B.V. All rights reserved.

Remuneration discrepancies in the landlocked economies of Malaŵi and Uganda.

PubMed

Munthali, Alister; Matagi, Leon; Tumwebaze, Callist

2010-10-01

Although the original study of remuneration differences between local and expatriate development workers took place in the landlocked economy of Malaŵi, the study has never been replicated outside of one sector and organization (the National University), and took place prior to the 2000 Millennium Development Goals. Participating in the present studies were 458 aid and development professionals, working across a range of sectors in Malaŵi (n = 241, response rate = 50%) and Uganda (n = 217, response rate = 51%). The size of the gap between local and international workers, measured using the World Bank's purchasing power parity, was higher in Malaŵi (4.04:1) than in Uganda (1.97:1). The ratio was more clearly within tolerance levels in Uganda than in Malaŵi. Consistent with these differences, and controlling for organization, cultural, and demographic factors, locally remunerated workers reported more and expatriate workers less injustice and demotivation in Malaŵi than in Uganda. Although sample sizes for the internationally remunerated are small, the findings suggest that wider disparities may (1) hinder perspective-taking and (2) decrease motivation. In-country workshops with stakeholders and subject-matter experts considered the findings, and potential solutions offered through the survey form. They recommended the implementation of performance-based remuneration, including competency-based job analysis and evaluation. Competencies in such functions can be provided by humanitarian work psychology.

Science, Technology and Innovation in Uganda

ERIC Educational Resources Information Center

Brar, Sukhdeep; Farley, Sara E.; Hawkins, Robert; Wagner, Caroline S.

2010-01-01

Science, Technology and Innovation in Uganda is part of the World Bank Studies series. These papers are published to communicate the results of the Bank's ongoing research and to stimulate public discussion. This study presents a unique methodology to view science, technology and innovation (STI) in developing countries. The study provides a set…

Prevalence of African swine fever virus in apparently healthy domestic pigs in Uganda.

PubMed

Atuhaire, David Kalenzi; Afayoa, Mathias; Ochwo, Sylvester; Mwesigwa, Savannah; Mwiine, Frank Norbert; Okuni, Julius Boniface; Olaho-Mukani, William; Ojok, Lonzy

2013-12-26

African swine fever (ASF) is a contagious viral disease which can cause up to 100% mortality among domestic pigs leading to serious socio-economic impact on people's livelihoods. ASF is endemic in Uganda and there is paucity of information on the epidemiology of the disease. The major aim of this study was to determine the seroprevalence and prevalence of African swine fever virus (ASFV) in apparently healthy slaughter pigs at Wambizi slaughterhouse in Kampala city, Uganda. We also estimated the presence of ASFV antibodies and circulating viral antigens in pigs from selected districts of Uganda during targeted surveillance. We analysed 540 and 181 blood samples collected from slaughter pigs and pigs from targeted surveillance districts respectively. The prevalence of ASFV in slaughter pigs was 52.96% (95% CI, 48.75-57.14) and 11.5% (95% CI, 9.06-14.45) by ELISA and PCR respectively. In surveillance districts, the proportion of ASFV positive pigs was 53.59% (95% CI, 46.33-60.71) and 0.55% (95% CI, 0.1-3.06) by ELISA and PCR respectively. The study has found out a high seroprevalence of ASFV antibodies in apparently healthy slaughter pigs and also a high proportion of ASFV antibody seropositive pigs in surveyed districts in Uganda indicating exposure to ASFV. However, there was a lower prevalence of ASFV infection implying that there could be low virulent strains of ASFV circulating in domestic pigs in Uganda which requires further investigation.

Clinico-pathological features of tuberculosis due to Mycobacterium tuberculosis Uganda genotype in patients with tuberculous lymphadenitis: a cross sectional study.

PubMed

Wamala, Dan; Asiimwe, Benon; Kigozi, Edgar; Mboowa, Gerald; Joloba, Moses; Kallenius, Gunilla

2014-04-02

Tuberculous lymphadenitis is next to pulmonary tuberculosis as the most common cause of tuberculosis. Uganda genotype, one of the sub-lineages of Mycobacterium tuberculosis, is the most prevalent cause of pulmonary tuberculosis in Uganda. We here investigate the clinicopathological characteristics of patients with tuberculous lymphadenitis infected with M. tuberculosis Uganda genotype compared with those infected with M. tuberculosis non-Uganda genotype strains. Between 2010 and 2012, we enrolled 121 patients (mean age 28.5 yrs, male 48%; female 52%) with tuberculous lymphadenitis, and categorized them by their M. tuberculosis genotypes. The clinical features and lymph node cytopathological parameters were compared between patients in the Uganda and non-Uganda categories using a crude and multivariable logistic regression model with adjustment for confounding factors. Of the 121participants, 56 (46%) were infected with strains of Uganda genotype. Patients infected with this genotype had significantly lower frequency of abdominal lymphadenopathy (odds ratio 0.4, p = 0.046) after adjusting for sex, age and HIV. Abdominal lymphadenopathy was also significantly associated with abnormal chest X-ray (p = 0.027). Tuberculous lymphadenitis patients infected with M. tuberculosis Uganda genotype were significantly less prone to have abdominal lymphadenopathy indicating potential reduced ability to disseminate and supporting the concept that differences in M. tuberculosis genotype may have clinical implications.

Procyanidin content of grape seed and pomace, and total anthocyanin content of grape pomace as affected by extrusion processing.

PubMed

Khanal, R C; Howard, L R; Prior, R L

2009-08-01

Grape juice processing by-products, grape seed and pomace are a rich source of procyanidins, compounds that may afford protection against chronic disease. This study was undertaken to identify optimal extrusion conditions to enhance the contents of monomers and dimers at the expense of large molecular weight procyanidin oligomers and polymers in grape seed and pomace. Extrusion variables, temperature (160, 170, and 180 degrees C in grape seed, and 160, 170, 180, and 190 degrees C in pomace) and screw speed (100, 150, and 200 rpm in both) were tested using mixtures of grape seed as well as pomace with decorticated white sorghum flour at a ratio of 30 : 70 and moisture content of 45%. Samples of grape seed and pomace were analyzed for procyanidin composition before and after extrusion, and total anthocyanins were determined in pomace. Additionally, chromatograms from diol and normal phase high-performance liquid chromatography were compared for the separation of procyanidins. Extrusion of both grape by-products increased the biologically important monomer and dimers considerably across all temperature and screw speeds. Highest monomer content resulted when extruded at a temperature of 170 degrees C and screw speed of 200 rpm, which were 120% and 80% higher than the unextruded grape seed and pomace, respectively. Increases in monomer and dimer contents were apparently the result of reduced polymer contents, which declined by 27% to 54%, or enhanced extraction facilitated by disruption of the food matrix during extrusion. Extrusion processing reduced total anthocyanins in pomace by 18% to 53%. Extrusion processing can be used to increase procyanidin monomer and dimer contents in grape seed and pomace. Procyanidins in grape by-products have many health benefits, but most are present as large molecular weight compounds, which are poorly absorbed. Extrusion processing appears to be a promising technology to increase levels of the bioactive low molecular weight

Location of the tibial tunnel aperture affects extrusion of the lateral meniscus following reconstruction of the anterior cruciate ligament.

PubMed

Kodama, Yuya; Furumatsu, Takayuki; Miyazawa, Shinichi; Fujii, Masataka; Tanaka, Takaaki; Inoue, Hiroto; Ozaki, Toshifumi

2017-08-01

The anterior root of the lateral meniscus provides functional stability to the meniscus. In this study, we evaluated the relationship between the position of the tibial tunnel and extrusion of the lateral meniscus after anterior cruciate ligament reconstruction, where extrusion provides a proxy measure of injury to the anterior root. The relationship between extrusion and tibial tunnel location was retrospectively evaluated from computed tomography and magnetic resonance images of 26 reconstructed knees, contributed by 25 patients aged 17-31 years. A measurement grid was used to localize the position of the tibial tunnel based on anatomical landmarks identified from the three-dimensional reconstruction of axial computed tomography images of the tibial plateaus. The reference point-to-tibial tunnel distance (mm) was defined as the distance from the midpoint of the lateral edge of the grid to the posterolateral aspect of the tunnel aperture. The optimal cutoff of this distance to minimize post-operative extrusion was identified using receiver operating curve analysis. Extrusion of the lateral meniscus was positively correlated to the reference point-to-tibial tunnel distance (r 2  = 0.64; p < 0.001), with a cutoff distance of 5 mm having a sensitivity to extrusion of 83% and specificity of 93%. The mean extrusion for a distance >5 mm was 0.40 ± 0.43 mm, compared to 1.40 ± 0.51 mm for a distance ≤5 mm (p < 0.001). Therefore, a posterolateral location of the tibial tunnel aperture within the footprint of the anterior cruciate ligament decreases the reference point-to-tibial tunnel distance and increases extrusion of the lateral meniscus post-reconstruction. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1625-1633, 2017. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

The Limits of Extrusion in the Western Himalaya

NASA Astrophysics Data System (ADS)

Zhang, K.; Webb, A. G.; Donaldson, D.; Johnson, S.; Elorriaga, T.

2014-12-01

Himalayan orogenesis is commonly explained by 1) extrusion models, involving expulsion of high-grade rocks southwards from beneath Tibet and up towards the High Himalayan orographic front, and/or 2) duplexing models, involving accretion of thrust horses from the downgoing Indian plate to the over-riding orogenic wedge. Most extrusion models predict exhumation and erosion of upper-amphibolite facies metamorphic rocks between the Main Central thrust (MCT) and a structurally higher normal fault, and therefore can be tested by determining if such high grade rocks occur between the MCT and the Indus-Yalu suture to the north. Prior qualitative studies suggest that such rocks are missing across the east Ladakh / Chamba and Kashmir regions of the western Himalaya. Here we present new quantitative and semi-quantitative results that document low peak metamorphic temperatures along a northeast-trending transect across the east Ladakh / Chamba Himalaya. We performed illite crystallinity (IC) and quartz grain boundary analyses to determine metamorphic and deformation temperatures, respectively. Calibrated IC values of structurally high samples range from 0.25 to 0.54, indicating temperatures of ~100 ˚C to ~300 ˚C. In structurally lower, muscovite +/- biotite-bearing meta-pelitic and meta-psammitic rocks, quartz grain boundaries show bulging recrystallization fabrics, corresponding to deformation temperatures of <~450 ˚C. Local exceptions occur along the southeast margin of the study region near a dome, where quartz sub-grain rotation fabrics indicate deformation temperatures between ~450 ˚C and ~550 ˚C. Our results, combined with similar IC values to the north from Girard et al. [2001, Clay Minerals v. 36, p. 237-247], demonstrate that a continuous strip of <~450 ˚C rocks extends from the MCT to the Indus-Yalu suture here. Therefore the predictions of extrusion models are not met in this portion of the Himalaya; we present alternative duplexing models.

Helicobacter pylori and cancer among adults in Uganda

PubMed Central

Newton, Robert; Ziegler, John L; Casabonne, Delphine; Carpenter, Lucy; Gold, Benjamin D; Owens, Marilyn; Beral, Valerie; Mbidde, Edward; Parkin, D Maxwell; Wabinga, Henry; Mbulaiteye, Sam; Jaffe, Harold

2006-01-01

Data from Africa on infection with Helicobacter pylori (H. pylori) are sparse. Therefore, as part of an epidemiological study of cancer in Uganda, we investigated the prevalence and determinants of antibodies against H. pylori among 854 people with different cancer types and benign tumours. Patients were recruited from hospitals in Kampala, Uganda, interviewed about various demographic and lifestyle factors and tested for antibodies against H. pylori. In all patients combined, excluding those with stomach cancer (which has been associated with H. pylori infection), the prevalence of antibodies was 87% (723/833) overall, but declined with increasing age (p = 0.02) and was lower among people who were HIV seropositive compared to seronegative (p < 0.001). Otherwise, there were few consistent epidemiological associations. Among those with stomach cancer, 18/21 (86%) had anti-H. pylori antibodies (odds ratio 0.8, 95% confidence intervals 0.2–2.9, p = 0.7; estimated using all other patients as controls, with adjustment for age, sex and HIV serostatus). No other cancer site or type was significantly associated with anti-H. pylori antibodies. The prevalence of H. pylori reported here is broadly in accord with results from other developing countries, although the determinants of infection and its' role in the aetiology of gastric cancer in Uganda remain unclear. PMID:17150134

The Palliative Care Journey in Kenya and Uganda.

PubMed

Kamonyo, Emmanuel S

2018-02-01

Palliative care is an approach that improves the quality of life of patients and their families facing the problems associated with life-threatening illness, through the prevention and relief of suffering by means of early identification and impeccable assessment and treatment of pain and other physical, psychosocial, and spiritual problems. This update is aimed at examining palliative care development/achievements and challenges in Kenya and Uganda and the role of various actors in palliative care establishment in the region. It assesses the policy environment, progress in education, access to essential medicines, palliative care implementation efforts, and legal and human rights work. East African nations have huge disease burdens, both communicable and noncommunicable. HIV and cancer are the major causes of mortality in Kenya and Uganda and put huge demands on the health care system and on the country's economies. All these conditions will require palliative care services as the disease burden increases. Unfortunately, for many African countries, accessing palliative care services, including access to pain relief, remains very limited resulting in serious suffering for patients and their families. The interventions in Kenya and Uganda help palliative care organizations engage with their respective governments to ensure that the social and legal barriers impeding access to palliative care services are removed. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Road traffic incidents in Uganda: a systematic review study of a five-year trend.

PubMed

Balikuddembe, Joseph Kimuli; Ardalan, Ali; Khorasani-Zavareh, Davoud; Nejati, Amir; Munanura, Kasiima Stephen

2017-01-01

Over the years, Uganda has been one of the low and middle-income countries bearing the heaviest burden of road traffic incidents (RTI). Since the proclamation of the United Nations Decade of Action for Road Safety 2011 - 2020, a number of measures have been taken to reduce the burden. However, they ought to be premised on existing evidence-based research; therefore, the present review ventures to report the most recent five-year trend of RTI in Uganda. Based on Preferred Reporting Items for Systematic Reviews and Meta-Data Analysis (PRISMA) guidelines, a systematic review was employed. Using a thematic analysis, the articles were grouped into: trauma etiology, trauma care, mortality, cost, trauma registry and communication, intervention and treatment for final analysis. Of the nineteen articles that were identified to be relevant to the study, the etiology of RTI was inevitably observed to be an important cause of injuries in Uganda. The risk factors cut across: the crash type, injury physiology, cause, victims, setting, age, economic status, and gender. All studies that were reviewed have advanced varying recommendations aimed at responding to the trend of RTIs in Uganda, of which some are in tandem with the five pillars of the United Nations Decade of Action for Road Safety 2011 - 2020. Peripheral measures of the burden of RTIs in Uganda were undertaken within afive-year timeframe (2011-2015) of implementing the United Nations Decade of Action for Road Safety. The measures however, ought to be scaled-up on robust evidence based research available from all the concerned stakeholders beyond Kampala or central region to other parts of Uganda. © 2017 KUMS, All rights reserved.

Formation of macromolecules in wheat gluten/starch mixtures during twin-screw extrusion: effect of different additives.

PubMed

Wang, Kaiqiang; Li, Cheng; Wang, Bingzhi; Yang, Wen; Luo, Shuizhong; Zhao, Yanyan; Jiang, Shaotong; Mu, Dongdong; Zheng, Zhi

2017-12-01

Wheat gluten comprises a good quality and inexpensive vegetable protein with an ideal amino acid composition. To expand the potential application of wheat gluten in the food industry, the effect of different additives on the physicochemical and structural properties of wheat gluten/starch mixtures during twin-screw extrusion was investigated. Macromolecules were observed to form in wheat gluten/starch mixtures during twin-screw extrusion, which may be attributed to the formation of new disulfide bonds and non-covalent interactions, as well as Maillard reaction products. Additionally, the water retention capacity and in vitro protein digestibility of all extruded wheat gluten/starch products significantly increased, whereas the nitrogen solubility index and free sulfhydryl group (SH) content decreased, during twin-screw extrusion. Secondary structural analysis showed that α-helices disappeared with the concomitant increase of antiparallel β-sheets, demonstrating the occurrence of protein aggregation. Microstructures suggested that the irregular wheat gluten granular structure was disrupted, with additive addition favoring transformation into a more layered or fibrous structure during twin-screw extrusion. The findings of the present study demonstrate that extrusion might affect the texture and quality of extruded wheat gluten-based foods and suggest that this process might serve as a basis for the high-value application of wheat gluten products. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Chemotherapy Use at the End of Life in Uganda

PubMed Central

Merkel, Emily C.; Menon, Manoj; Lyman, Gary H.; Ddungu, Henry; Namukwaya, Elizabeth; Leng, Mhoira; Casper, Corey

2017-01-01

Purpose Avoiding chemotherapy during the last 30 days of life has become a goal of cancer care in the United States and Europe, yet end-of-life chemotherapy administration remains a common practice worldwide. The purpose of this study was to determine the frequency of and factors predicting end-of-life chemotherapy administration in Uganda. Methods Retrospective chart review and surveys and interviews of providers were performed at the Uganda Cancer Institute (UCI), the only comprehensive cancer center in the area, which serves a catchment area of greater than 100 million people. All adult patients at the UCI with reported cancer deaths between January 1, 2014, and August 31, 2015 were included. All UCI physicians were offered a survey, and a subset of physicians were also individually interviewed. Results Three hundred ninety-two patients (65.9%) received chemotherapy. Age less than 55 years (odds ratio [OR], 2.30; P = .004), a cancer diagnosis greater than 60 days before death (OR, 9.13; P < .001), and a presenting Eastern Cooperative Oncology Group performance status of 0 to 2 (OR, 2.47; P = .001) were associated with the administration of chemotherapy. More than 45% of patients received chemotherapy in the last 30 days of life. No clinical factors were predictive of chemotherapy use in the last 30 days of life, although doctors reported using performance status, cancer stage, and tumor chemotherapy sensitivity to determine when to administer chemotherapy. Patient expectations and a lack of outcomes data were important nonclinical factors influencing chemotherapy administration. Conclusion Chemotherapy is administered to a high proportion of patients with terminal cancer in Uganda, raising concern about efficacy. Late presentation of cancer in Uganda complicates end-of-life chemotherapy recommendations, necessitating guidelines specific to sub-Saharan Africa. PMID:29244988

Effect of Extrusion Parameters on Texture and Microstructure Evolution of Extruded Mg-1 pctMn and Mg-1 pctMn-Sr Alloys

NASA Astrophysics Data System (ADS)

Borkar, Hemant; Pekguleryuz, Mihriban

2015-01-01

Three Mg alloys Mg-1 pctMn (M1), Mg-1 pctMn-1.3 pctSr, and Mg-1 pctMn-2.1 pctSr were subjected to two different extrusion temperatures and two different extrusion speeds in lab-scale extrusion. The extrusion temperatures of 573 K and 673 K (300 °C and 400 °C) and two ram speeds of 4 and 8 mm/s were used at constant extrusion ratio of 7. M1 exhibited strong basal texture after extrusion at 673 K (400 °C) at higher speed. At 573 K (300 °C), recrystallization in all alloys takes place completely or partially by continuous dynamic recrystallization mechanism, while particle stimulated nucleation (PSN) occurs in all M1-Sr alloys at both extrusion temperatures and speeds. At 673 K (400 °C), grain boundary bulging is the only recrystallization mechanism in alloy M1, while it occurs in combination with PSN in M1-Sr alloys. The effect of texture weakening by PSN is more significant in M1-Sr alloys extruded at 573 K (400 °C). The plant extrusion trials were carried out on Mg-1 pctMn, Mg-1 pctMn-0.3 pctSr, and Mg-1 pctMn-2.1 pctSr at 623 K (350 °C) with different speeds than in lab-scale extrusion. M1 alloy exhibited strong basal texture at both speeds, while Sr additions of 0.3 and 2.1 pct promoted similar amount of texture weakening.

The extrusion test and sensory perception revisited: Some comments on generality and the effect of measurement temperature.

PubMed

Brenner, Tom; Tomczyńska-Mleko, Marta; Mleko, Stanisław; Nishinari, Katsuyoshi

2017-12-01

Relations between sensory perception, extrusion and fracture in shear, extension and compression are examined. Gelatin-based gels are perceived as less firm and less hard than expected based on their mechanical properties compared to polysaccharide gels that have the same mechanical properties at room temperature but melt well above body temperature, underlying the importance of the measurement temperature for gels that melt during mastication. Correlations between parameters from extrusion and compression, extension and shear are verified using mixed polysaccharide gels. We previously reported a high correlation between several sensory attributes and parameters from an extrusion test. The extrusion test showed the most robust correlation, and could be used to assess samples at both extremes of the texture range with respect to elasticity, for example, both samples that could not be extended as their very low elasticity led to their fracture during handling, as well as samples that could not be fractured in compression. Here, we reexamine the validity of the relations reported. We demonstrate the generality of the relations between large deformation tests and extrusion, but the findings underscore the need to take into account the measurement temperature for samples that melt during mastication when correlating instrumental parameters with sensory perception. © 2017 Wiley Periodicals, Inc.

Carotenoid Stability during Dry Milling, Storage, and Extrusion Processing of Biofortified Maize Genotypes.

PubMed

Ortiz, Darwin; Ponrajan, Amudhan; Bonnet, Juan Pablo; Rocheford, Torbert; Ferruzzi, Mario G

2018-05-09

Translation of the breeding efforts designed to biofortify maize ( Z. mays) genotypes with higher levels of provitamin A carotenoid (pVAC) content for sub-Saharan Africa is dependent in part on the stability of carotenoids during postharvest through industrial and in-home food processing operations. The purpose of this study was to simulate production of commercial milled products by determining the impact of dry milling and extrusion processing on carotenoid stability in three higher pVAC maize genotypes (C17xDE3, Orange ISO, Hi27xCML328). Pericarp and germ removal of biofortified maize kernels resulted in ∼10% loss of total carotenoids. Separating out the maize flour fraction (<212 μm) resulted in an additional ∼15% loss of total carotenoids. Carotenoid degradation was similar across milled maize fractions. Dry-milled products of Orange ISO and Hi27xCML328 genotypes showed ∼28% pVAC loss after 90-days storage. Genotype C17xDE3, with highest levels of all- trans-β-carotene, showed a 68% pVAC loss after 90-day storage. Extrusion processing conditions were optimal at 35% extrusion moisture, producing fully cooked instant maize flours with high pVAC retention (70-93%). These results support the notion that postharvest losses in maize milled fractions may be dependent, in part, on genotype and that extrusion processing may provide an option for preserving biofortified maize products.

Privatisation of Higher Education in Uganda and the Global Gender Justice Ideal: Uneasy Bedfellows?

ERIC Educational Resources Information Center

Baine, Euzobia M. Mugisha

2010-01-01

This paper examines ways in which privatisation of education is affecting the search for gender justice through education focusing on Uganda's higher education institutions (HEIs). Since 1988 when the first private university was opened, the winds of change have swept Uganda's higher education sector to change how it is financed and managed. The…

Dental extrusion with orthodontic miniscrew anchorage: a case report describing a modified method.

PubMed

Horliana, Ricardo Fidos; Horliana, Anna Carolina Ratto Tempestini; Wuo, Alexandre do Vale; Perez, Flávio Eduardo Guillin; Abrão, Jorge

2015-01-01

In recent years, the skeletal anchorage through miniscrews has expanded the treatment options in orthodontics (Yamaguchi et al., 2012). We hereby present a modified method for tooth extrusion for cases where crown-lengthening surgery is contraindicated for aesthetic reasons. This modified method uses three orthodontic appliances: a mini-implant, an orthodontic wire, and a bracket. The aim of this case report was to increase the length of the clinical crown of a fractured tooth (tooth 23) by means of an orthodontic extrusion with the modified method of Roth and Diedrich.

Incidence of Extrusion Following Type I Polypropylene Mesh “Kit” Repairs in the Correction of Pelvic Organ Prolapse

PubMed Central

Lukban, James C.; Beyer, Roger D.; Moore, Robert D.

2012-01-01

Introduction and Hypothesis. We sought to determine the mesh extrusion (vaginal exposure) rates and subject outcomes following IntePro (Type I polypropylene) mesh “kit” repairs for vaginal prolapse. Methods. Data were pooled from two prospective multicenter studies evaluating the safety and efficacy of the Perigee and Apogee (American Medical Systems, Minnetonka, Minn, USA) to treat anterior and posterior/apical prolapses, respectively. Extrusions involving the anterior compartment (AC) or posterior compartment/apex (PC/A) were recorded. Results. Two hundred sixty women underwent mesh placement, with a total of 368 mesh units inserted (173 in the AC and 195 in the PC/A). Extrusions were noted in 13 (7.5%) of AC implants and 27 (13.8%) of PC/A implants through 12 months. No difference was seen between those with and without extrusion in regard to anatomic cure, postoperative painor quality of life at 1 year. Conclusions. Extrusion had no apparent effect on short-term outcomes. Given the unknown long-term sequellae of vaginal mesh exposure, a thorough assessment of risks and benefits of transvaginal mesh placement should be considered at the time of preoperative planning. PMID:22190952

Novel fiber-rich lentil flours as snack-type functional foods: an extrusion cooking effect on bioactive compounds.

PubMed

Morales, P; Berrios, J De J; Varela, A; Burbano, C; Cuadrado, C; Muzquiz, M; Pedrosa, M M

2015-09-01

Novel snack-type functional foods based on extruded lentil flours could convey the related health benefit of their bioactive compounds, provide a gluten-free alternative to consumers, and potentially increase the consumption of pulses. Extrusion treatment promoted an increase in galactopinitol, ciceritol, raffinose, stachyose and total α-galactoside content, in most lentil flours. As α-galactosides may act as prebiotics, they could convey beneficial effects to human and monogastric animals. Conversely, extrusion significantly (p < 0.05) reduced the inositol hexaphosphate content to less phosphorylated phytates (inositol pentaphosphate and inositol tetraphosphate), which provide health effects. The gluten-free formulation (control formulation #3) presented the highest significant (p < 0.05) drop in the inositol hexaphosphate of 14.7-fold decrease, but had a large increase in inositol pentaphosphate, due to extrusion processing. These two results are desirable in the finished product. Extrusion also caused a significant (p < 0.05) reduction in the trypsin content and completely inactivated lectin, in all processed samples.

Consolidating tactical planning and implementation frameworks for integrated vector management in Uganda.

PubMed

Okia, Michael; Okui, Peter; Lugemwa, Myers; Govere, John M; Katamba, Vincent; Rwakimari, John B; Mpeka, Betty; Chanda, Emmanuel

2016-04-14

Integrated vector management (IVM) is the recommended approach for controlling some vector-borne diseases (VBD). In the face of current challenges to disease vector control, IVM is vital to achieve national targets set for VBD control. Though global efforts, especially for combating malaria, now focus on elimination and eradication, IVM remains useful for Uganda which is principally still in the control phase of the malaria continuum. This paper outlines the processes undertaken to consolidate tactical planning and implementation frameworks for IVM in Uganda. The Uganda National Malaria Control Programme with its efforts to implement an IVM approach to vector control was the 'case' for this study. Integrated management of malaria vectors in Uganda remained an underdeveloped component of malaria control policy. In 2012, knowledge and perceptions of malaria vector control policy and IVM were assessed, and recommendations for a specific IVM policy were made. In 2014, a thorough vector control needs assessment (VCNA) was conducted according to WHO recommendations. The findings of the VCNA informed the development of the national IVM strategic guidelines. Information sources for this study included all available data and accessible archived documentary records on VBD control in Uganda. The literature was reviewed and adapted to the local context and translated into the consolidated tactical framework. WHO recommends implementation of IVM as the main strategy to vector control and has encouraged member states to adopt the approach. However, many VBD-endemic countries lack IVM policy frameworks to guide implementation of the approach. In Uganda most VBD coexists and could be managed more effectively if done in tandem. In order to successfully control malaria and other VBD and move towards their elimination, the country needs to scale up proven and effective vector control interventions and also learn from the experience of other countries. The IVM strategy is important in

Assessing catastrophic and impoverishing effects of health care payments in Uganda.

PubMed

Kwesiga, Brendan; Zikusooka, Charlotte M; Ataguba, John E

2015-01-22

Direct out-of-pocket payments for health care are recognised as limiting access to health care services and also endangering the welfare of households. In Uganda, such payments comprise a large portion of total health financing. This study assesses the catastrophic and impoverishing impact of paying for health care out-of-pocket in Uganda. Using data from the Uganda National Household Surveys 2009/10, the catastrophic impact of out-of-pocket health care payments is defined using thresholds that vary with household income. The impoverishing effect of out-of-pocket health care payments is assessed using the Ugandan national poverty line and the World Bank poverty line ($1.25/day). A high level and intensity of both financial catastrophe and impoverishment due to out-of-pocket payments are recorded. Using an initial threshold of 10% of household income, about 23% of Ugandan households face financial ruin. Based on both the $1.25/day and the Ugandan poverty lines, about 4% of the population are further impoverished by such payments. This represents a relative increase in poverty head count of 17.1% and 18.1% respectively. The absence of financial protection in Uganda's health system calls for concerted action. Currently, out-of-pocket payments account for a large share of total health financing and there is no pooled prepayment system available. There is therefore a need to move towards mandatory prepayment. In this way, people could access the needed health services without any associated financial consequence.

Prevalence of African swine fever virus in apparently healthy domestic pigs in Uganda

PubMed Central

2013-01-01

Background African swine fever (ASF) is a contagious viral disease which can cause up to 100% mortality among domestic pigs leading to serious socio-economic impact on people’s livelihoods. ASF is endemic in Uganda and there is paucity of information on the epidemiology of the disease. The major aim of this study was to determine the seroprevalence and prevalence of African swine fever virus (ASFV) in apparently healthy slaughter pigs at Wambizi slaughterhouse in Kampala city, Uganda. We also estimated the presence of ASFV antibodies and circulating viral antigens in pigs from selected districts of Uganda during targeted surveillance. We analysed 540 and 181 blood samples collected from slaughter pigs and pigs from targeted surveillance districts respectively. Results The prevalence of ASFV in slaughter pigs was 52.96% (95% CI, 48.75-57.14) and 11.5% (95% CI, 9.06-14.45) by ELISA and PCR respectively. In surveillance districts, the proportion of ASFV positive pigs was 53.59% (95% CI, 46.33-60.71) and 0.55% (95% CI, 0.1-3.06) by ELISA and PCR respectively. Conclusion The study has found out a high seroprevalence of ASFV antibodies in apparently healthy slaughter pigs and also a high proportion of ASFV antibody seropositive pigs in surveyed districts in Uganda indicating exposure to ASFV. However, there was a lower prevalence of ASFV infection implying that there could be low virulent strains of ASFV circulating in domestic pigs in Uganda which requires further investigation. PMID:24369729

Reduction of Ochratoxin A in Oat Flakes by Twin-Screw Extrusion Processing.

PubMed

Lee, Hyun Jung; Dahal, Samjhana; Perez, Enrique Garcia; Kowalski, Ryan Joseph; Ganjyal, Girish M; Ryu, Dojin

2017-10-01

Ochratoxin A (OTA) is one of the most important mycotoxins owing to its widespread occurrence and toxicity, including nephrotoxicity and potential carcinogenicity to humans. OTA has been detected in a wide range of agricultural commodities, including cereal grains and their processed products. In particular, oat-based products show a higher incidence and level of contamination. Extrusion cooking is widely used in the manufacturing of breakfast cereals and snacks and may reduce mycotoxins to varying degrees. Hence, the effects of extrusion cooking on the stability of OTA in spiked (100 μg/kg) oat flake was investigated by using a laboratory-scale twin-screw extruder with a central composite design. Factors examined were moisture content (20, 25, and 30% dry weight basis), temperature (140, 160, and 180°C), screw speed (150, 200, and 250 rpm), and die size (1.5, 2, and 3 mm). Both nonextruded and extruded samples were analyzed for reductions of OTA by high-performance liquid chromatography, coupled with fluorescence detection. The percentage of reductions in OTA in the contaminated oat flakes upon extrusion processing were in the range of 0 to 28%. OTA was partially stable during extrusion, with only screw speed and die size having significant effect on reduction (P < 0.005). The highest reduction of 28% was achieved at 180°C, 20% moisture, 250 rpm screw speed, and a 3-mm die with 193 kJ/kg specific mechanical energy. According to the central composite design analyses, up to 28% of OTA can be reduced by a combination of 162°C, 30% moisture, and 221 rpm, with a 3-mm die.

Institutional Efficiency in Selected Universities in Uganda

ERIC Educational Resources Information Center

Amina, Nakimuli; Turyahebwa, Abanis

2015-01-01

Universities are accountable This study looked into Institutional Efficiency in selected Universities in Central Uganda. The study was guided by the following objectives; Determine the level of institutional efficiency of the universities in terms of educational efficiency; research efficiency and community service efficiency. The study employed…

The Influence of Price on School Enrollment under Uganda's Policy of Free Primary Education

ERIC Educational Resources Information Center

Lincove, Jane Arnold

2012-01-01

This study uses household survey data to estimate determinants of schooling in Uganda, with a model that includes the price of school. Uganda's universal education policy offered free tuition, fees, and supplies to up to four children per family, including two daughters. The empirical method includes an estimation of a child-specific price of…

Rapid production of hollow SS316 profiles by extrusion based additive manufacturing

NASA Astrophysics Data System (ADS)

Rane, Kedarnath; Cataldo, Salvatore; Parenti, Paolo; Sbaglia, Luca; Mussi, Valerio; Annoni, Massimiliano; Giberti, Hermes; Strano, Matteo

2018-05-01

Complex shaped stainless steel tubes are often required for special purpose biomedical equipment. Nevertheless, traditional manufacturing technologies, such as extrusion, lack the ability to compete in a market of customized complex components because of associated expenses towards tooling and extrusion presses. To rapid manufacture few of such components with low cost and high precision, a new Extrusion based Additive Manufacturing (EAM) process, is proposed in this paper, and as an example, short stainless steel 316L complex shaped and sectioned tubes were prepared by EAM. Several sample parts were produced using this process; the dimensional stability, surface roughness and chemical composition of sintered samples were investigated to prove process competence. The results indicate that feedstock with a 316L particle content of 92.5 wt. % can be prepared with a sigma blade mixing, whose rheological behavior is fit for EAM. The green samples have sufficient strength to handle them for subsequent treatments. The sintered samples considerably shrunk to designed dimensions and have a homogeneous microstructure to impart mechanical strength. Whereas, maintaining comparable dimensional accuracy and chemical composition which are required for biomedical equipment still need iterations, a kinematic correction and modification in debinding cycle was proposed.

Obesity as a form of malnutrition: over-nutrition on the Uganda “malnutrition” agenda

PubMed Central

Ngaruiya, Christine; Hayward, Alison; Post, Lori; Mowafi, Hani

2017-01-01

The objectives were to highlight the burden of overweight and obesity as an additional area of importance for the malnutrition agenda in Uganda and to provide evidence-based considerations for stakeholders involved. Introduction: Mirroring other Low- and Middle-Income Countries (LMICs), Uganda is experiencing a “double burden” of over-nutrition related issues - both obesity and overweight, and related non-communicable diseases (NCDs) alongside the under-nutrition that has long plagued the country. Despite the commonplace assumption that under-nutrition is the predominant form of malnutrition in Uganda, we explore recent literature that in fact, challenges this notion. While food insecurity has contributed to the under-nutrition problem, a lack of dietary diversity also has a demonstrated role in increasing over-nutrition. We cannot afford to ignore over-nutrition concomitant with stunting and wasting in the country. Increase in the burden of this less acknowledged form of malnutrition in Uganda is critical to investigate, and yet poorly understood. A move towards increased regionally targeted over-nutrition research, funding, government prioritization and advocacy is needed. PMID:29184601

Uganda--rehabilitation, or redefinition of health services?

PubMed

Dodge, C P

1986-01-01

Uganda had one of the best health care delivery systems in Africa. The decade of misrule by Amin saw a collapse of the country and an exodus of doctors and other professions. The 1979 liberation war and subsequent political instability and insecurity further aggravated the poor health services then available. When political stability was temporarily restored in December 1980 the cash crop export sector took priority over social services and the health budget declined to only 3.5% compared to a former level of 7.5% of government budget. Emergencies in West Nile, Karamoja and the Luwero triangle continued to plague rehabilitation efforts upto 1985. Alternate strategies for improving health are proposed including female education, increased budget allocations, food and nutrition policy and health information. Uganda's prospect for rebuilding the health services has begun with immunization, control of diarrhoeal diseases, nutrition surveillance in Karamoja and an essential drugs programme, but the success of these is dependent upon political stability and improvement in overall security.

Information and Communication for Rural Innovation and Development: Context, Quality and Priorities in Southeast Uganda

ERIC Educational Resources Information Center

Sseguya, Haroon; Mazur, Robert; Abbott, Eric; Matsiko, Frank

2012-01-01

Purpose: To examine the status and priorities for agricultural information generation, dissemination and utilization in the context of agricultural innovation systems in southeast Uganda. Design/Methodology/Approach: Group discussions were conducted with six communities in Kamuli district, southeast Uganda. The focus was on information sources and…

Patient-level benefits associated with decentralization of antiretroviral therapy services to primary health facilities in Malawi and Uganda.

PubMed

Abongomera, George; Chiwaula, Levison; Revill, Paul; Mabugu, Travor; Tumwesige, Edward; Nkhata, Misheck; Cataldo, Fabian; van Oosterhout, J; Colebunders, Robert; Chan, Adrienne K; Kityo, Cissy; Gilks, Charles; Hakim, James; Seeley, Janet; Gibb, Diana M; Ford, Deborah

2018-01-01

The Lablite project captured information on access to antiretroviral therapy (ART) at larger health facilities ('hubs') and lower-level health facilities ('spokes') in Phalombe district, Malawi and in Kalungu district, Uganda. We conducted a cross-sectional survey among patients who had transferred to a spoke after treatment initiation (Malawi, n=54; Uganda, n=33), patients who initiated treatment at a spoke (Malawi, n=50; Uganda, n=44) and patients receiving treatment at a hub (Malawi, n=44; Uganda, n=46). In Malawi, 47% of patients mapped to the two lowest wealth quintiles (Q1-Q2); patients at spokes were poorer than at a hub (57% vs 23% in Q1-Q2; p<0.001). In Uganda, 7% of patients mapped to Q1-Q2; patients at the rural spoke were poorer than at the two peri-urban facilities (15% vs 4% in Q1-Q2; p<0.001). The median travel time one way to a current ART facility was 60 min (IQR 30-120) in Malawi and 30 min (IQR 20-60) in Uganda. Patients who had transferred to the spokes reported a median reduction in travel time of 90 min in Malawi and 30 min in Uganda, with reductions in distance and food costs. Decentralizing ART improves access to treatment. Community-level access to treatment should be considered to further minimize costs and time. © The Author(s) 2018. Published by Oxford University Press Royal Society of Tropical Medicine and Hygiene.

Rheological properties of wood polymer composites and their role in extrusion

NASA Astrophysics Data System (ADS)

Duretek, I.; Schuschnigg, S.; Gooneie, A.; Langecker, G. R.; Holzer, C.

2015-04-01

The influence of the rheological behaviour of PP based wood plastic composites (WPC) has been investigated in this research by means of a high pressure capillary rheometer incorporating dies having different geometries. The rheological experiments were performed using slit and round dies. The influence of moisture content on the flow properties of the WPC has been investigated as well. It was observed that higher moisture contents lead to wall slippage effect. Furthermore, measured viscosity data have been used in flow simulation of an extrusion profile die. Also, the influence of different rheological models on the simulation results is demonstrated. This research work presents a theoretical and experimental study on the measurement and prediction of the die pressure in the extrusion process of wood-plastic composite (WPC).

Expiry of medicines in supply outlets in Uganda.

PubMed

Nakyanzi, Josephine Katabaazi; Kitutu, Freddy Eric; Oria, Hussein; Kamba, Pakoyo Fadhiru

2010-02-01

The expiry of medicines in the supply chain is a serious threat to the already constrained access to medicines in developing countries. We investigated the extent of, and the main contributing factors to, expiry of medicines in medicine supply outlets in Kampala and Entebbe, Uganda. A cross-sectional survey of six public and 32 private medicine outlets was done using semi-structured questionnaires. The study area has 19 public medicine outlets (three non-profit wholesalers, 16 hospital stores/pharmacies), 123 private wholesale pharmacies and 173 retail pharmacies, equivalent to about 70% of the country's pharmaceutical businesses. Our findings indicate that medicines prone to expiry include those used for vertical programmes, donated medicines and those with a slow turnover. Awareness about the threat of expiry of medicines to the delivery of health services has increased. We have adapted training modules to emphasize management of medicine expiry for pharmacy students, pharmacists and other persons handling medicines. Our work has also generated more research interest on medicine expiry in Uganda. Even essential medicines expire in the supply chain in Uganda. Sound coordination is needed between public medicine wholesalers and their clients to harmonize procurement and consumption as well as with vertical programmes to prevent duplicate procurement. Additionally, national medicine regulatory authorities should enforce existing international guidelines to prevent dumping of donated medicine. Medicine selection and quantification should be matched with consumer tastes and prescribing habits. Lean supply and stock rotation should be considered.

Power and process: The politics of electricity sector reform in Uganda

NASA Astrophysics Data System (ADS)

Gore, Christopher David

In 2007, Uganda had one of the lowest levels of access to electricity in the world. Given the influence of multilateral and bilateral agencies in Uganda; the strong international reputation and domestic influence of its President; the country's historic achievements in public sector and economic reform; and the intimate connection between economic performance, social well-being and access to electricity, the problems with Uganda's electricity sector have proven deeply frustrating and, indeed, puzzling. Following increased scholarly attention to the relationship between political change, policymaking, and public sector reform in sub-Saharan Africa and the developing world generally, this thesis examines the multilevel politics of Uganda's electricity sector reform process. This study contends that explanations for Uganda's electricity sector reform problems generally, and hydroelectric dam construction efforts specifically, must move beyond technical and financial factors. Problems in this sector have also been the result of a model of reform (promoted by the World Bank) that failed adequately to account for the character of political change. Indeed, the model of reform that was promoted and implemented was risky and it was deeply antagonistic to domestic and international civil society organizations. In addition, it was presented as a linear, technical, apolitical exercise. Finally the model was inconsistent with key principles the Bank itself, and public policy literature generally, suggest are needed for success. Based on this analysis, the thesis contends that policymaking and reform must be understood as deeply political processes, which not only define access to services, but also participation in, and exclusion from, national debates. Future approaches to reform and policymaking must anticipate the complex, multilevel, non-linear character of 'second-generation' policy issues like electricity, and the political and institutional capacity needed to increase

Manufacture of gradient micro-structures of magnesium alloys using two stage extrusion dies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hwang, Yeong-Maw; Huang, Tze-Hui; Alexandrov, Sergei

2013-12-16

This paper aims to manufacture magnesium alloy metals with gradient micro-structures using hot extrusion process. The extrusion die was designed to have a straight channel part combined with a conical part. Materials pushed through this specially-designed die generate a non-uniform velocity distribution at cross sections inside the die and result in different strain and strain rate distributions. Accordingly, a gradient microstructure product can be obtained. Using the finite element analysis, the forming temperature, effective strain, and effective strain rate distributions at the die exit were firstly discussed for various inclination angles in the conical die. Then, hot extrusion experiments withmore » a two stage die were conducted to obtain magnesium alloy products with gradient micro-structures. The effects of the inclination angle on the grain size distribution at cross sections of the products were also discussed. Using a die of an inclination angle of 15°, gradient micro-structures of the grain size decreasing gradually from 17 μm at the center to 4 μm at the edge of product were achieved.« less

Production Process of Biocompatible Magnesium Alloy Tubes Using Extrusion and Dieless Drawing Processes

NASA Astrophysics Data System (ADS)

Kustra, Piotr; Milenin, Andrij; Płonka, Bartłomiej; Furushima, Tsuyoshi

2016-06-01

Development of technological production process of biocompatible magnesium tubes for medical applications is the subject of the present paper. The technology consists of two stages—extrusion and dieless drawing process, respectively. Mg alloys for medical applications such as MgCa0.8 are characterized by low technological plasticity during deformation that is why optimization of production parameters is necessary to obtain good quality product. Thus, authors developed yield stress and ductility model for the investigated Mg alloy and then used the numerical simulations to evaluate proper manufacturing conditions. Grid Extrusion3d software developed by authors was used to determine optimum process parameters for extrusion—billet temperature 400 °C and extrusion velocity 1 mm/s. Based on those parameters the tube with external diameter 5 mm without defects was manufactured. Then, commercial Abaqus software was used for modeling dieless drawing. It was shown that the reduction in the area of 60% can be realized for MgCa0.8 magnesium alloy. Tubes with the final diameter of 3 mm were selected as a case study, to present capabilities of proposed processes.

"Homosexuality/Homophobia Is Un-African"?: Un-Mapping Transnational Discourses in the Context of Uganda's Anti-Homosexuality Bill/Act.

PubMed

Wahab, Amar

2016-01-01

This article un-maps the recent impasse between pro- and antigay mobilization around Uganda's Anti-Homosexuality Act (AHA, 2009-2014). Drawing on scholarly and social media sources, it summarizes the increasing influence of (U.S.) transnational evangelism that has precipitated a state-religious complex of "anticipatory political homophobia" in Uganda. If transnational evangelism against same-sex sexuality in Uganda has generated a strong reaction from global LGBT human-rights advocates, this article critiques this Western homotransnationalist response by analyzing its limited terms of operation, focusing on the ways in which Uganda is hailed into the biopolitical project of a Western queer modernity. The author focuses on the copresence between homotransnationalist mobilization and "homophobic anticipatory countermobilization" as (re)organizing/suturing a global ordering project that is deeply invested in biopolitics and necropolitics. This suggests that the global flashpointing of Uganda in the context of the AHA incites further questions concerning the transnationality of "gay human rights" discourse under neoliberalism.

Rheology and extrusion of low-grade paper and sludge

Treesearch

C. Tim Scott; Stefan Zauscher; Daniel J. Klingenberg

1999-01-01

This paper discusses efforts to characterize the rheological properties of pulps that include low-grade wastepapers and papermill sludges to determine their potential for extrusion and conversion into useful products. We investigated apparent changes in viscosity associated with the addition of typical inorganic paper fillers (calcium carbonate, kaolin clay, and...

Optimization of extrusion conditions for the production of instant grain amaranth-based porridge flour.

PubMed

Akande, Olamide A; Nakimbugwe, Dorothy; Mukisa, Ivan M

2017-11-01

Malnutrition is one of the foremost causes of death among children below 5 years in developing countries. Development of nutrient-dense food formulations using locally available crops has been proposed as a means to combat this menace. This study optimized the extrusion process for the production of a nutritious amaranth-based porridge flour. Least cost formulations containing grain amaranth, groundnut, iron-rich beans, pumpkin, orange-fleshed sweet potato, carrot, and maize were developed and evaluated by a sensory panel ( n  = 30) for acceptability using the 9-point hedonic scale. Extrusion process of the most acceptable porridge flour was optimized by response surface methodology (RSM). Barrel temperature (130-170°C) and feed moisture content (14%-20%) were the independent variables which significantly ( p  < .05) affected in vitro protein digestibility, vitamin A retention, total polyphenol, phytic content, and iron and zinc extractabilities. Optimization of the extrusion process improved the nutritional quality of the instant flour.

Counteracting Fabricated Anti-Gay Public Pedagogy in Uganda with Strategic Lifelong Learning as Critical Action

ERIC Educational Resources Information Center

Grace, André P.

2016-01-01

Political, cultural and social fallout following the introduction of the anti-homosexuality bill in Uganda in 2009 intensified fabrication of an anti-gay public pedagogy of negation and nemesis that fuelled the passage of the Anti-Homosexuality Act, 2014. The Government of Uganda, conventional Anglicanism and US evangelical Christianity were all…

Phenomenological model of maize starches expansion by extrusion

NASA Astrophysics Data System (ADS)

Kristiawan, M.; Della Valle, G.; Kansou, K.; Ndiaye, A.; Vergnes, B.

2016-10-01

During extrusion of starchy products, the molten material is forced through a die so that the sudden abrupt pressure drop causes part of the water to vaporize giving an expanded, cellular structure. The objective of this work was to elaborate a phenomenological model of expansion and couple it with Ludovic® mechanistic model of twin screw extrusion process. From experimental results that cover a wide range of thermomechanical conditions, a concept map of influence relationships between input and output variables was built. It took into account the phenomena of bubbles nucleation, growth, coalescence, shrinkage and setting, in a viscoelastic medium. The input variables were the moisture content MC, melt temperature T, specific mechanical energy SME, shear viscosity η at the die exit, computed by Ludovic®, and the melt storage moduli E'(at T > Tg). The outputs of the model were the macrostructure (volumetric expansion index VEI, anisotropy) and cellular structure (fineness F) of solid foams. Then a general model was established: VEI = α (η/η0)n in which α and n depend on T, MC, SME and E' and the link between anisotropy and fineness was established.

78 FR 34984 - Aluminum Extrusions From the People's Republic of China: Notice of Court Decision Not in Harmony...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-11

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-967; C-570-968] Aluminum... (AD) and countervailing duty (CVD) orders on aluminum extrusions,\\1\\ pursuant to the CIT's remand... Rail Kits \\2\\ and is amending its final scope ruling. \\1\\ See Aluminum Extrusions from the People's...

Load beam unit replaceable inserts for dry coal extrusion pumps

DOEpatents

Saunders, Timothy; Brady, John D.

2012-11-13

A track assembly for a particulate material extrusion pump according to an exemplary aspect of the present disclosure includes a link assembly with a roller bearing. An insert mounted to a load beam located such that the roller bearing contacts the insert.

Track with overlapping links for dry coal extrusion pumps

DOEpatents

Saunders, Timothy; Brady, John D

2014-01-21

A chain for a particulate material extrusion pump includes a plurality of links, each of the plurality of links having a link body and a link ledge, wherein each link ledge of the plurality of links at least partially overlaps the link body of an adjacent one of the plurality of links.

Stakeholders' Perceptions of Agronomic Iodine Biofortification: A SWOT-AHP Analysis in Northern Uganda.

PubMed

Olum, Solomon; Gellynck, Xavier; Okello, Collins; Webale, Dominic; Odongo, Walter; Ongeng, Duncan; De Steur, Hans

2018-03-24

Agronomic biofortification (i.e., the application of fertilizer to elevate micronutrient concentrations in staple crops) is a recent strategy recommended for controlling Iodine Deficiency Disorders (IDDs). However, its success inevitably depends on stakeholders' appreciation and acceptance of it. By taking Northern Uganda as a case, this study aimed to capture and compare the perceptions of seven key stakeholder groups with respect to agronomic iodine biofortification. Therefore, we employed a SWOT (Strength, Weaknesses, Opportunities & Threats) analysis in combination with an Analytical Hierarchy Process (AHP). Findings show that stakeholders ( n = 56) are generally positive about agronomic iodine biofortification in Uganda, as its strengths and opportunities outweighed weaknesses and threats. Cultural acceptance and effectiveness are considered the most important strengths while the high IDD prevalence rate and the availability of iodine deficient soils are key opportunities for further developing agronomic iodine biofortification. Environmental concerns about synthetic fertilizers as well as the time needed to supply iodine were considered crucial weaknesses. The limited use of fertilizer in Uganda was the main threat. While this study provides insight into important issues and priorities for iodine biofortification technology in Uganda, including differences in stakeholder views, the application of the SWOT-AHP method will guide future researchers and health planners conducting stakeholder analysis in similar domains.

Stakeholders’ Perceptions of Agronomic Iodine Biofortification: A SWOT-AHP Analysis in Northern Uganda

PubMed Central

Olum, Solomon; Gellynck, Xavier; Okello, Collins; Webale, Dominic; Odongo, Walter; Ongeng, Duncan

2018-01-01

Agronomic biofortification (i.e., the application of fertilizer to elevate micronutrient concentrations in staple crops) is a recent strategy recommended for controlling Iodine Deficiency Disorders (IDDs). However, its success inevitably depends on stakeholders’ appreciation and acceptance of it. By taking Northern Uganda as a case, this study aimed to capture and compare the perceptions of seven key stakeholder groups with respect to agronomic iodine biofortification. Therefore, we employed a SWOT (Strength, Weaknesses, Opportunities & Threats) analysis in combination with an Analytical Hierarchy Process (AHP). Findings show that stakeholders (n = 56) are generally positive about agronomic iodine biofortification in Uganda, as its strengths and opportunities outweighed weaknesses and threats. Cultural acceptance and effectiveness are considered the most important strengths while the high IDD prevalence rate and the availability of iodine deficient soils are key opportunities for further developing agronomic iodine biofortification. Environmental concerns about synthetic fertilizers as well as the time needed to supply iodine were considered crucial weaknesses. The limited use of fertilizer in Uganda was the main threat. While this study provides insight into important issues and priorities for iodine biofortification technology in Uganda, including differences in stakeholder views, the application of the SWOT-AHP method will guide future researchers and health planners conducting stakeholder analysis in similar domains. PMID:29587370

Microstructure characterization of LAE442 magnesium alloy processed by extrusion and ECAP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minárik, Peter; Král, Robert; Pešička, Josef

2016-02-15

The magnesium alloy LAE442 was processed by extrusion and equal channel angular pressing (ECAP) to achieve ultrafine grained microstructure. Detailed characterization of the microstructure was performed by scanning electron microscope, electron back scattered diffraction (EBSD) and transmission electron microscope. The initial, as-cast, microstructure consisted of large grains of ~ 1 mm. The grain refinement due to the processing by severe plastic deformation led to a decrease of the average grain size to ~ 1.7 μm after the final step of ECAP. A detailed characterization of secondary phases showed the precipitation of Al{sub 11}RE{sub 3}, Al{sub 2}Ca and Al{sub 10}RE{sub 2}Mn{submore » 7} intermetallic phases. X-ray diffraction measurements proved that Li is dissolved within the magnesium matrix in the as-cast condition. Newly formed Al{sub 3}Li phase was observed after ECAP. The texture formation due to the extrusion and ECAP was different from that in the other magnesium alloys due to the activation of non-basal slip systems as a result of the decrease of the c/a ratio. - Highlights: • Combined extrusion and equal channel angular pressing results in significant grain refinement by factor 1000 approximately. • Al{sub 11}RE{sub 3}, Al{sub 2}Ca and Al{sub 10}RE{sub 2}Mn{sub 7} secondary phases are present in the as-cast material while Li was dissolved in the Mg matrix. • Extrusion and ECAP have no effect on the composition of the secondary phases but they influence strongly their distribution. • Texture evolution is affected by decrease of c/a ratio due to the presence of Li and resulting activation of non-basal slip.« less

Carbonates in mantle xenoliths from French Massif Central: inference for carbonatite-related metasomatism.

NASA Astrophysics Data System (ADS)

Wagner, Christiane; Deloule, Etienne

2016-04-01

Mantle xenoliths from the sub-continental lithospheric mantle (SCLM) frequently display evidence of metasomatism by melts or fluids of variable composition, e.g. alkali-basaltic, alkali-carbonate or carbonate melts. Carbonate-bearing mantle xenoliths are particularly interesting as highly mobile carbonate melts are likely prominent metasomatic agents of the mantle. This study presents detailed petrographic descriptions and major and trace element compositions of minerals in protogranular spinel lherzolites from the Mont Coupet occurrence (Devès province, French Massif Central), with focus on the carbonate phases to discuss their possible link to carbonatite melt. Two representative samples are described here. MC9 shows no evidence for infiltration of the host basanitic magma. Carbonates occur (1) as large (100 μm - 200 μm) anhedral crystals in interstitial pockets at triple point of primary olivine grains, (2) in a few cross-cutting veins (up to 200 μm width), (3) along grain boundaries and (4) in composite carbonate-silicate pockets from well-developed reaction zones, in which carbonates fill globular vesicles. The reaction zone contains secondary subhedral to euhedral phases: Al- and Ti-rich clinopyroxene, Ca-rich olivine, Cr-rich spinel and quenched plagioclase and relict sieved-textured primary spinel. MC2 shows carbonate-bearing thin (< 50 μm width) interconnected veinlets and only a few poorly-developed reaction zones around primary spinel. Large carbonate crystals (1), as in sample MC9, occur associated with (2) fibrous carbonate with a well-formed meniscus at the boundary between the two carbonate types. In some reaction zones the carbonate patches (3) show well-developed concentric carbonate structures, similar to those observed in the globular vesicles from the host basanite. In sample MC9, the carbonate is an alkali-free Mg-poor calcite (XCa = 0.95 - 0.98; with 0.5 - 1.8 wt. % MgO) whatever the occurrence. In sample MC2, carbonates are Mg

Uganda: condoms provoke an AIDS storm.

PubMed

Tebere, R

1991-03-01

An advertisement in the Uganda weekly Topic printed in 1990 is the center of the controversy over whether promoting condom use to prevent AIDS is really promoting immorality and promiscuity. The ad states: "The bible may save your soul but this condom will save you life." Critics have called the ad blasphemy for showing a condom package alongside the Bible; claimed the condom fools people into thinking they are safe from AIDS; and blamed the practice of supplying condoms for the moral decadence that is destroying the country. In contrast the national AIDS Control Program (ACP) believes that supplying university students, who may be the group at highest risk, with condoms, is wise because they at lest know how to use them properly. A spokesman for the ACP said that the condom is one of the limited options that exist to fight the life-threatening epidemic. Present Museven changed his views to November 1990 from a policy of encouraging abstinence and monogamy, to promoting condoms. This change in government policy coincided with the report of 17,422 cases of AIDS, and the estimate that 1.3 million people in Uganda are infected with HIV.

Into the Forest: The Evolution of a Conservation Education Program at Kalinzu Forest Reserve, Uganda

ERIC Educational Resources Information Center

Kuhar, Christopher W.; Bettinger, Tammie L.; Lehnhardt, Kathy; Townsend, Stephanie; Cox, Debbie

2007-01-01

While there are many conservation programs in east Africa, relatively little is invested in environmental education or capacity building within the community. With this in mind, the National Forest Authority of Uganda, the Ugandan Ministry of Education and Sports, Disney's Animal Kingdom[R], and the Jane Goodall Institute--Uganda entered into a…

Apical Extrusion of Irrigants in Immature Permanent Teeth by Using EndoVac and Needle Irrigation: An In Vitro Study

PubMed Central

Velmurugan, N; Sooriaprakas, C; Jain, Preetham

2014-01-01

Objective: Immature teeth have a large apical opening and thin divergent or parallel dentinal walls; hence, with conventional needle irrigation there is a very high possibility of extrusion. This study was done to compare the apical extrusion of NaOCl in an immature root delivered using EndoVac and needle irrigation. Materials and Methods: Eighty freshly extracted maxillary central incisors were decoronated followed by access cavity preparation. Modified organotypic protocol was performed to create an open apex; then, the samples were divided into four groups (n=20): EndoVac Microcannula (group I), EndoVac Macrocannula (group II), NaviTip irrigation needle (group III) and Max-i-Probe Irrigating needle (group IV); 9.0 ml of 3% sodium hypochlorite was delivered slowly over a period of 60 seconds. Extruded irrigants were collected in a vial and analysed statistically. Results: Group I, group III and group IV showed 100% extrusion (20/20) but group II showed only 40% extrusion (8/20). The difference in this respect between group II and other groups was statistically significant (P<0.001). With regards to the volume of extrusion, group II had only 0.23 ml of extruded irrigant. Group I extruded 7.53ml of the irrigant. Group III and group IV extruded the entire volume of irrigant delivered. Conclusion: EndoVac Macrocannula resulted in the least extrusion of irrigant in immature teeth when compared to EndoVac Microcannula and conventional needle irrigation. PMID:25584055

Contraceptive knowledge, perceptions, and concerns among men in Uganda.

PubMed

Thummalachetty, Nityanjali; Mathur, Sanyukta; Mullinax, Margo; DeCosta, Kelsea; Nakyanjo, Neema; Lutalo, Tom; Brahmbhatt, Heena; Santelli, John S

2017-10-10

Low contraceptive uptake and high unmet need for contraception remain significant issues in Uganda compared to neighboring countries such as Kenya, Ethiopia, and Rwanda. Although prior research on contraceptive uptake has indicated that male partners strongly influence women's decisions around contraceptive use, there is limited in-depth qualitative research on knowledge and concerns regarding modern contraceptive methods among Ugandan men. Using in-depth interviews (N = 41), this qualitative study investigated major sources of knowledge about contraception and perceptions of contraceptive side effects among married Ugandan men. Men primarily reported knowledge of contraceptives based on partner's experience of side effects, partner's knowledge from health providers and mass media campaigns, and partner's knowledge from her peers. Men were less likely to report contraceptive knowledge from health care providers, mass media campaigns, or peers. Men's concerns about various contraceptive methods were broadly associated with failure of the method to work properly, adverse health effects on women, and severe adverse health effects on children. Own or partner's human immunodeficiency virus (HIV) status did not impact on contraceptive knowledge. Overall, we found limited accurate knowledge about contraceptive methods among men in Uganda. Moreover, fears about the side effects of modern contraceptive methods appeared to be common among men. Family planning services in Uganda could be significantly strengthened by renewed efforts to focus on men's knowledge, fears, and misconceptions.

African Indigenous science in higher education in Uganda

NASA Astrophysics Data System (ADS)

Akena Adyanga, Francis

This study examines African Indigenous Science (AIS) in higher education in Uganda. To achieve this, I use anticolonial theory and Indigenous knowledge discursive frameworks to situate the subjugation of Indigenous science from the education system within a colonial historical context. These theories allow for a critical examination of the intersection of power relations rooted in the politics of knowledge production, validation, and dissemination, and how this process has become a systemic and complex method of subjugating one knowledge system over the other. I also employ qualitative and autoethnographic research methodologies. Using a qualitative research method, I interviewed 10 students and 10 professors from two universities in Uganda. My research was guided by the following key questions: What is African Indigenous Science? What methodology would help us to indigenize science education in Uganda? How can we work with Indigenous knowledge and anticolonial theoretical discursive frameworks to understand and challenge the dominance of Eurocentric knowledge in mainstream education? My research findings revealed that AIS can be defined in multiple ways, in other words, there is no universal definition of AIS. However, there were some common elements that my participants talked about such as: (a) knowledge by Indigenous communities developed over a long period of time through a trial and error approach to respond to the social, economic and political challenges of their society. The science practices are generational and synergistic with other disciplines such as history, spirituality, sociology, anthropology, geography, and trade among others, (b) a cumulative practice of the use, interactions with and of biotic and abiotic organism in everyday life for the continued existence of a community in its' totality. The research findings also indicate that Indigenous science is largely lacking from Uganda's education curriculum because of the influence of colonial and

The Simulium nigritarse subgroup (Diptera: Simuliidae) in Uganda: New species and country records.

PubMed

Krüger, Andreas

2016-06-07

Amongst blackfly samples from western Uganda three different morphospecies of the Simulium (Nevermannia) nigritarse Coquillett subgroup were identified. Of these, S. perforatum Fain & Dujardin showed the widest distribution and is reported from Uganda for the first time. In addition, two new species are described: S. bwambanum sp. nov. and S. itwariense sp. nov. Diagnostic characters are the different structures of the pupal cocoon, the configurations of the gill filaments and adult colour features.

Autophagy can promote but is not required for epithelial cell extrusion in the amnioserosa of the Drosophila embryo.

PubMed

Cormier, Olga; Mohseni, Nilufar; Voytyuk, Iryna; Reed, Bruce H

2012-02-01

During Drosophila embryogenesis the majority of the extra-embryonic epithelium known as the amnioserosa (AS) undergoes programmed cell death (PCD) following the completion of the morphogenetic process of dorsal closure. Approximately ten percent of AS cells, however, are eliminated during dorsal closure by extrusion from the epithelium. Using biosensors that report autophagy and caspase activity in vivo, we demonstrate that AS cell extrusion occurs in the context of elevated autophagy and caspase activation. Furthermore, we evaluate AS extrusion rates, autophagy, and caspase activation in embryos in which caspase activity or autophagy are altered by genetic manipulation. This includes using the GAL4/UAS system to drive expression of p35, reaper, dINR (ACT) and Atg1 in the AS; we also analyze embryos lacking both maternal and zygotic expression of Atg1. Based on our results we suggest that autophagy can promote, but is not required for, epithelial extrusion and caspase activation in the amnioserosa.

Effect of Different Extrusion Parameters on Dietary Fiber in Wheat Bran and Rye Bran.

PubMed

Andersson, Annica A M; Andersson, R; Jonsäll, Anette; Andersson, Jörgen; Fredriksson, Helena

2017-06-01

Wheat bran and rye bran are mostly used as animal feed today, but their high content of dietary fiber and bioactive components are beneficial to human health. Increased use of bran as food raw material could therefore be desirable. However, bran mainly contains unextractable dietary fiber and deteriorates the sensory properties of products. Processing by extrusion could increase the extractability of dietary fiber and increase the sensory qualities of bran products. Wheat bran and rye bran were therefore extruded at different levels of moisture content, screw speed and temperature, in order to find the optimal setting for increased extractability of dietary fiber and positive sensory properties. A water content of 24% for wheat bran and 30% for rye bran, a screw speed of 400 rpm, and a temperature of 130 °C resulted in the highest extractability of total dietary fiber and arabinoxylan. Arabinoxylan extractability increased from 5.8% in wheat bran to 9.0% in extruded wheat bran at those settings, and from 14.6% to 19.2% for rye bran. Total contents of dietary fiber and arabinoxylan were not affected by extrusion. Content of β-glucan was also maintained during extrusion, while its molecular weight decreased slightly and extractability increased slightly. Extrusion at these settings is therefore a suitable process for increasing the use of wheat bran and rye bran as a food raw material. © 2017 Institute of Food Technologists®.

AIDS communications through social networks: catalyst for behaviour changes in Uganda.

PubMed

Low-Beer, Daniel; Stoneburner, Rand L

2004-05-01

To investigate distinctive communications through social networks which may be associated with population behaviour changes and HIV prevalence declines in Uganda compared to other countries. We undertook a comparative analysis of demographic and HIV behavioural data collected in Demographic and Health Surveys (DHS III) in Uganda, Kenya, Tanzania, Malawi, Zambia and Zimbabwe as well as Knowledge, Attitudes and Behaviours (KABP) surveys in Uganda in 1989 and 1995. AIDS behaviours, social communications and channels for communication about AIDS and people with AIDS were analysed by age, sex and country. Modelling was developed to investigate at what stage of the epidemic a majority of people will know someone with AIDS, given differing communication patterns through social networks. Finally AIDS reporting and Voluntary Counselling and Testing (VCT) trends were analysed to assess if the impact of social communications worked through clinical services and interventions or more directly at the population level in community contexts. Uganda showed unique patterns of communications through social networks including a shift from mass and institutional to personal channels for communicating about AIDS, 1989-1995. This was associated with higher levels of knowing someone with AIDS through social networks and, in turn, positive risk ratios for behaviour change including reducing casual sex and condom use. Youth had distinctively high levels of knowing someone with AIDS in Uganda, suggesting widespread community communication across age groups. Patterns of disclosure, AIDS diagnosis and reporting were influential on social communications about AIDS. Over 90%, 45% or under 20% of people know someone with AIDS at peak HIV incidence and high AIDS mortality, depending on whether communications through social networks are extensive or restricted. There are distinctive patterns for communicating through social networks about AIDS and people with AIDS in Uganda. They appear to work

Alkaline twin-screw extrusion pretreatment for fermentable sugar production

PubMed Central

2013-01-01

Background The inevitable depletion of fossil fuels has resulted in an increasing worldwide interest in exploring alternative and sustainable energy sources. Lignocellulose, which is the most abundant biomass on earth, is widely regarded as a promising raw material to produce fuel ethanol. Pretreatment is an essential step to disrupt the recalcitrance of lignocellulosic matrix for enzymatic saccharification and bioethanol production. This paper established an ATSE (alkaline twin-screw extrusion pretreatment) process using a specially designed twin-screw extruder in the presence of alkaline solution to improve the enzymatic hydrolysis efficiency of corn stover for the production of fermentable sugars. Results The ATSE pretreatment was conducted with a biomass/liquid ratio of 1/2 (w/w) at a temperature of 99°C without heating equipment. The results indicated that ATSE pretreatment is effective in improving the enzymatic digestibility of corn stover. Sodium hydroxide loading is more influential factor affecting both sugar yield and lignin degradation than heat preservation time. After ATSE pretreatment under the proper conditions (NaOH loading of 0.06 g/g biomass during ATSE and 1 hour heat preservation after extrusion), 71% lignin removal was achieved and the conversions of glucan and xylan in the pretreated biomass can reach to 83% and 89% respectively via subsequent enzymatic hydrolysis (cellulase loading of 20 FPU/g-biomass and substrate consistency of 2%). About 78% of the original polysaccharides were converted into fermentable sugars. Conclusions With the physicochemical functions in extrusion, the ATSE method can effectively overcome the recalcitrance of lignocellulose for the production of fermentable sugars from corn stover. This process can be considered as a promising pretreatment method due to its relatively low temperature (99°C), high biomass/liquid ratio (1/2) and satisfied total sugar yield (78%), despite further study is needed for process

Alkaline twin-screw extrusion pretreatment for fermentable sugar production.

PubMed

Liu, Chao; van der Heide, Evert; Wang, Haisong; Li, Bin; Yu, Guang; Mu, Xindong

2013-01-01

The inevitable depletion of fossil fuels has resulted in an increasing worldwide interest in exploring alternative and sustainable energy sources. Lignocellulose, which is the most abundant biomass on earth, is widely regarded as a promising raw material to produce fuel ethanol. Pretreatment is an essential step to disrupt the recalcitrance of lignocellulosic matrix for enzymatic saccharification and bioethanol production. This paper established an ATSE (alkaline twin-screw extrusion pretreatment) process using a specially designed twin-screw extruder in the presence of alkaline solution to improve the enzymatic hydrolysis efficiency of corn stover for the production of fermentable sugars. The ATSE pretreatment was conducted with a biomass/liquid ratio of 1/2 (w/w) at a temperature of 99°C without heating equipment. The results indicated that ATSE pretreatment is effective in improving the enzymatic digestibility of corn stover. Sodium hydroxide loading is more influential factor affecting both sugar yield and lignin degradation than heat preservation time. After ATSE pretreatment under the proper conditions (NaOH loading of 0.06 g/g biomass during ATSE and 1 hour heat preservation after extrusion), 71% lignin removal was achieved and the conversions of glucan and xylan in the pretreated biomass can reach to 83% and 89% respectively via subsequent enzymatic hydrolysis (cellulase loading of 20 FPU/g-biomass and substrate consistency of 2%). About 78% of the original polysaccharides were converted into fermentable sugars. With the physicochemical functions in extrusion, the ATSE method can effectively overcome the recalcitrance of lignocellulose for the production of fermentable sugars from corn stover. This process can be considered as a promising pretreatment method due to its relatively low temperature (99°C), high biomass/liquid ratio (1/2) and satisfied total sugar yield (78%), despite further study is needed for process optimization and cost reduction.

Influence of macromolecular architecture on necking in polymer extrusion film casting process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pol, Harshawardhan; Banik, Sourya; Azad, Lal Busher

2015-05-22

Extrusion film casting (EFC) is an important polymer processing technique that is used to produce several thousand tons of polymer films/coatings on an industrial scale. In this research, we are interested in understanding quantitatively how macromolecular chain architecture (for example long chain branching (LCB) or molecular weight distribution (MWD or PDI)) influences the necking and thickness distribution of extrusion cast films. We have used different polymer resins of linear and branched molecular architecture to produce extrusion cast films under controlled experimental conditions. The necking profiles of the films were imaged and the velocity profiles during EFC were monitored using particlemore » tracking velocimetry (PTV) technique. Additionally, the temperature profiles were captured using an IR thermography and thickness profiles were calculated. The experimental results are compared with predictions of one-dimensional flow model of Silagy et al{sup 1} wherein the polymer resin rheology is modeled using molecular constitutive equations such as the Rolie-Poly (RP) and extended Pom Pom (XPP). We demonstrate that the 1-D flow model containing the molecular constitutive equations provides new insights into the role of macromolecular chain architecture on film necking.{sup 1}D. Silagy, Y. Demay, and J-F. Agassant, Polym. Eng. Sci., 36, 2614 (1996)« less

Effects of extrusion temperature and dwell time on aflatoxin levels in cottonseed.

PubMed

Buser, Michael D; Abbas, Hamed K

2002-04-24

Cottonseed is an economical source of protein and is commonly used in balancing livestock rations; however, its use is typically limited by protein, fat, gossypol, and aflatoxin contents. Whole cottonseed was extruded to determine if the temperature and dwell time (multiple stages of processing) associated with the process affected aflatoxin levels. The extrusion temperature study showed that aflatoxin levels were reduced by an additional 33% when the cottonseed was extruded at 160 degrees C as compared to 104 degrees C. Furthermore, the multiple-pass extrusion study indicated that aflatoxin levels were reduced by an additional 55% when the cottonseed was extruded four times as compared to one time. To estimate the aflatoxin reductions due to extrusion temperature and dwell time, the least mean fits obtained for the individual studies were combined. Total estimated reductions of 55% (three stages of processing at 104 degrees C), 50% (two stages of processing at 132 degrees C), and 47% (one stage of processing at 160 degrees C) were obtained from the combined equations. If the extreme conditions (four stages of processing at 160 degrees C) of the evaluation studies are applied to the combined temperature and processing equation, the resulting aflatoxin reduction would be 76%.

Characterization of ultra-fine grained aluminum produced by accumulative back extrusion (ABE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alihosseini, H., E-mail: hamid.alihossieni@gmail.com; Materials Science and Engineering Department, Engineering School, Amirkabir University, Tehran; Faraji, G.

2012-06-15

In the present work, the microstructural evolutions and microhardness of AA1050 subjected to one, two and three passes of accumulative back extrusion (ABE) were investigated. The microstructural evolutions were characterized using transmission electron microscopy. The results revealed that applying three passes of accumulative back extrusion led to significant grain refinement. The initial grain size of 47 {mu}m was refined to the grains of 500 nm after three passes of ABE. Increasing the number of passes resulted in more decrease in grain size, better microstructure homogeneity and increase in the microhardness. The cross-section of ABEed specimen consisted of two different zones:more » (i) shear deformation zone, and (ii) normal deformation zone. The microhardness measurements indicated that the hardness increased from the initial value of 31 Hv to 67 Hv, verifying the significant microstructural refinement via accumulative back extrusion. - Highlights: Black-Right-Pointing-Pointer A significant grain refinement can be achieved in AA1050, Al alloy by applying ABE. Black-Right-Pointing-Pointer Microstructural homogeneity of ABEed samples increased by increasing the number of ABE cycles. Black-Right-Pointing-Pointer A substantial increase in the hardness, from 31 Hv to 67 Hv, was recorded.« less

Patterns of Human Plague in Uganda, 2008-2016.

PubMed

Forrester, Joseph D; Apangu, Titus; Griffith, Kevin; Acayo, Sarah; Yockey, Brook; Kaggwa, John; Kugeler, Kiersten J; Schriefer, Martin; Sexton, Christopher; Ben Beard, C; Candini, Gordian; Abaru, Janet; Candia, Bosco; Okoth, Jimmy Felix; Apio, Harriet; Nolex, Lawrence; Ezama, Geoffrey; Okello, Robert; Atiku, Linda; Mpanga, Joseph; Mead, Paul S

2017-09-01

Plague is a highly virulent fleaborne zoonosis that occurs throughout many parts of the world; most suspected human cases are reported from resource-poor settings in sub-Saharan Africa. During 2008-2016, a combination of active surveillance and laboratory testing in the plague-endemic West Nile region of Uganda yielded 255 suspected human plague cases; approximately one third were laboratory confirmed by bacterial culture or serology. Although the mortality rate was 7% among suspected cases, it was 26% among persons with laboratory-confirmed plague. Reports of an unusual number of dead rats in a patient's village around the time of illness onset was significantly associated with laboratory confirmation of plague. This descriptive summary of human plague in Uganda highlights the episodic nature of the disease, as well as the potential that, even in endemic areas, illnesses of other etiologies might be being mistaken for plague.

Development of Co-Extrusion Technologies for Green Manufacture of Energetics

DTIC Science & Technology

2006-04-01

extrusion, Cc-extruded, ETPE, TPE, Energetic thermoplastic elastomer , PDMS, Polydimethyl siloxane, Fast core propellant, Co-layered, Wall slip, Shear...first opportunity possible, the steady FEM models of SIT will need to be converted into time dependent models to allow time dependent calculations to be

Microstructure evolution and mechanical properties of nano-SiCp/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qiao, X.G.; Ying, T.

Nano-SiCp/AZ91 magnesium matrix composite was fabricated by stir casting. The as-cast ingots were extruded at 350 °C, then processed by equal channel angular pressing (ECAP) at various temperatures (250 °C, 300 °C and 350 °C). Grains are significantly refined after the extrusion and the ECAP. A basal fibre texture was detected by neutron diffraction after the extrusion, which inclines about 45° to the extrusion direction (ED) after the ECAP. Nano-scaled SiC particles agglomerate in the as-cast composite. After the extrusion, the agglomeration tends to form continuous or discontinuous strips along the extrusion direction. By application of the ECAP, the agglomeratedmore » SiC particles are partly dispersed and the strips formed during the extrusion tend to be thinner and broken with the increasing pass number. The yield tensile strength (YTS) and the ultimate tensile strength (UTS) of the composite are dramatically increased after the extrusion. ECAP for one pass at various temperatures further increases the strength, however, the YTS decreases with the increasing ECAP temperature and the pass number. The Orowan equations predict the maximum YTS of the composite may be up to 400 MPa providing SiC particles are homogenously distributed in the matrix. - Highlights: •Nano-scaled SiC particles were successfully added into AZ91 by stirring casting. •Agglomeration of nano-particles were improved by extrusion and ECAP. •Yield strength of the composite is 328 MPa after one pass of ECAP. •Further ECAP process with optimized parameters may fully disperse nano-particles. •Yield strength is predicted to up to 400 MPa when particles are fully dispersed.« less

Hot-melt extrusion microencapsulation of quercetin for taste-masking.

PubMed

Khor, Chia Miang; Ng, Wai Kiong; Kanaujia, Parijat; Chan, Kok Ping; Dong, Yuancai

2017-02-01

Besides its poor dissolution rate, the bitterness of quercetin also poses a challenge for further development. Using carnauba wax, shellac or zein as the shell-forming excipient, this work aimed to microencapsulate quercetin by hot-melt extrusion for taste-masking. In comparison with non-encapsulated quercetin, the microencapsulated powders exhibited significantly reduced dissolution in the simulated salivary pH 6.8 medium indicative of their potentially good taste-masking efficiency in the order of zein > carnauba wax > shellac. In vitro bitterness analysis by electronic tongue confirmed the good taste-masking efficiency of the microencapsulated powders. In vitro digestion results showed that carnauba wax and shellac-microencapsulated powders presented comparable dissolution rate with the pure quercetin in pH 1.0 (gastric) and 6.8 (intestine) medium; while zein-microencapsulated powders exhibited a remarkably slower dissolution rate. Crystallinity of quercetin was slightly reduced after microencapsulation while its chemical structure remained unchanged. Hot-melt extrusion microencapsulation could thus be an attractive technique to produce taste-masked bioactive powders.

Strain transformation between tectonic extrusion and crustal thickening in the growth of the Tibetan Plateau

NASA Astrophysics Data System (ADS)

Liu, M.; Li, Y.; Sun, Y.; Shen, X.

2017-12-01

The Indo-Eurasian continental collision since 50 Ma has thickened the crust to raise the Himalayan-Tibetan Plateau and driven lateral extrusion of Asian lithospheric blocks to affect Cenozoic tectonics in central and east Asia. The relative roles of crustal thickening and tectonic extrusion, and the strain partitioning between them over time and space, remain controversial. We have analyzed the strain rates using GPS velocities, and correlated the results with vertical motion derived from precise leveling. We found that tectonic extrusion largely transforms to crustal thickening near the margins of the Tibetan Plateau. Near the NW margin of the Tibetan Plateau, the shear stain transforms to compressive strain, consistent with neotectonic studies that indicate crustal shortening and uplift. Around the SE margin, shear stain largely terminates in the southern Yunnan province of China. The present-day crustal motion in SE Tibetan Plateau can be well explained by gravitational spreading without invoking plate-edge push as envisioned in the tectonic extrusion model. Using data collected from local seismic arrays, we derived receiver functions to image the lithospheric structures across the Tibetan Plateau and the Alashan block to its north and the Ordos block to its east. Our results indicate that the mantle lithosphere of these bounding Asian blocks has not been reworked by Tibetan tectonics; instead they have acted as restrictive walls to the growing Tibetan Plateau. Our finite element modeling shows that crustal deformation along the margins of the Tibetan Plateau are consistent with the notion that the east- and southeastward extrusion of the Tibetan lithosphere is largely confined to the Tibetan Plateau because of the restrictive bounding blocks of the Asian lithosphere. Thus the tectonic impact of the Indo-Eurasian collision on the Cenozoic Asian tectonics may not be as extensive as previously thought.

Quantitative measures of meniscus extrusion predict incident radiographic knee osteoarthritis--data from the Osteoarthritis Initiative.

PubMed

Emmanuel, K; Quinn, E; Niu, J; Guermazi, A; Roemer, F; Wirth, W; Eckstein, F; Felson, D

2016-02-01

To test the hypothesis that quantitative measures of meniscus extrusion predict incident radiographic knee osteoarthritis (KOA), prior to the advent of radiographic disease. 206 knees with incident radiographic KOA (Kellgren Lawrence Grade (KLG) 0 or 1 at baseline, developing KLG 2 or greater with a definite osteophyte and joint space narrowing (JSN) grade ≥1 by year 4) were matched to 232 control knees not developing incident KOA. Manual segmentation of the central five slices of the medial and lateral meniscus was performed on coronal 3T DESS MRI and quantitative meniscus position was determined. Cases and controls were compared using conditional logistic regression adjusting for age, sex, BMI, race and clinical site. Sensitivity analyses of early (year [Y] 1/2) and late (Y3/4) incidence was performed. Mean medial extrusion distance was significantly greater for incident compared to non-incident knees (1.56 mean ± 1.12 mm SD vs 1.29 ± 0.99 mm; +21%, P < 0.01), so was the percent extrusion area of the medial meniscus (25.8 ± 15.8% vs 22.0 ± 13.5%; +17%, P < 0.05). This finding was consistent for knees restricted to medial incidence. No significant differences were observed for the lateral meniscus in incident medial KOA, or for the tibial plateau coverage between incident and non-incident knees. Restricting the analysis to medial incident KOA at Y1/2 differences were attenuated, but reached significance for extrusion distance, whereas no significant differences were observed at incident KOA in Y3/4. Greater medial meniscus extrusion predicts incident radiographic KOA. Early onset KOA showed greater differences for meniscus position between incident and non-incident knees than late onset KOA. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Expiry of medicines in supply outlets in Uganda

PubMed Central

Nakyanzi, Josephine Katabaazi; Kitutu, Freddy Eric; Oria, Hussein

2010-01-01

Abstract Problem The expiry of medicines in the supply chain is a serious threat to the already constrained access to medicines in developing countries. Approach We investigated the extent of, and the main contributing factors to, expiry of medicines in medicine supply outlets in Kampala and Entebbe, Uganda. A cross-sectional survey of six public and 32 private medicine outlets was done using semi-structured questionnaires. Local setting The study area has 19 public medicine outlets (three non-profit wholesalers, 16 hospital stores/pharmacies), 123 private wholesale pharmacies and 173 retail pharmacies, equivalent to about 70% of the country’s pharmaceutical businesses. Our findings indicate that medicines prone to expiry include those used for vertical programmes, donated medicines and those with a slow turnover. Relevant changes Awareness about the threat of expiry of medicines to the delivery of health services has increased. We have adapted training modules to emphasize management of medicine expiry for pharmacy students, pharmacists and other persons handling medicines. Our work has also generated more research interest on medicine expiry in Uganda. Lessons learned Even essential medicines expire in the supply chain in Uganda. Sound coordination is needed between public medicine wholesalers and their clients to harmonize procurement and consumption as well as with vertical programmes to prevent duplicate procurement. Additionally, national medicine regulatory authorities should enforce existing international guidelines to prevent dumping of donated medicine. Medicine selection and quantification should be matched with consumer tastes and prescribing habits. Lean supply and stock rotation should be considered. PMID:20428373

Solid state recycling of aluminium alloys via a porthole die hot extrusion process: Scaling up to production

NASA Astrophysics Data System (ADS)

Paraskevas, Dimos; Kellens, Karel; Deng, Yelin; Dewulf, Wim; Kampen, Carlos; Duflou, Joost R.

2017-10-01

Whereas industrial symbiosis has led to increased energy and resource efficiency in process industries, this concept has not yet been applied in discrete product manufacturing. Metal scrap is first conventionally recycled, for which substantial energy and resource efficiency losses have been reported. Recent research has however proven the feasibility of `meltless' recycling of light metal scrap, yielding a first glimpse of potential industrial symbiosis. Various solid state recycling techniques (such as recycling via hot extrusion or Spark Plasma Sintering) have been proposed for scrap consolidation directly into bulk products or semis by physical disruption and dispersion of the oxide surface film by imposing significant plastic and shear strain. Solid State Recycling (SSR) methods can omit substantial material losses as they bypass the metallurgical recycling step. In this context the case of direct production of bulk aluminium profiles via hot extrusion at industrial scale is demonstrated within this paper. The extrusion tests were performed directly into the production line, highlighting the scaling up potentials and the industrial relevance of this research. A significant amount of machining chips were collected, chemically cleaned and cold compacted into chip based billets with ˜80% relative density. Afterwards the scrap consolidation was achieved by imposing significant plastic and shear deformation into the material during hot extrusion through a modified 2-porthole extrusion die-set. The production process sequence along with microstructural investigations and mechanical properties comparison of the cast based profile used as reference versus the chip based profile are presented.

Effect of extrusion temperature and moisture content of corn flour on crystallinity and hardness of rice analogues

NASA Astrophysics Data System (ADS)

Budi, Faleh Setia; Hariyadi, Purwiyatno; Budijanto, Slamet; Syah, Dahrul

2015-12-01

Rice analogues are food products made of broken rice and/or any other carbohydrate sources to have similar texture and shape as rice. They are usually made by hot extrusion processing. The hot extrusion process may change the crystallinity of starch and influence the characteristic of rice analogues. Therefore, this research aimed to study the effect of moisture content of incoming dough and temperature of extrusion process on the crystallinity and hardness of resulting rice analogues. The dough's were prepared by mixing of corn starch-flour with ratio 10/90 (w/w) and moisture content of 35%, 40% and 45% (w/w) and extrusion process were done at temperature of 70, 80, 90°C by using of twin screw extruder BEX-DS-2256 Berto. The analyses were done to determine the type of crystal, degree of crystallinity, and hardness of the resulting rice analogues. Our result showed that the enhancement of extrusion temperature from 70 - 90°C increased degree of crystallinity from 5.86 - 15.00% to 10.70 - 18.87% and hardness from 1.71 - 4.36 kg to 2.05 - 5.70 kg. The raising of dough moisture content from 35 - 45% decreased degree of crystallinity from 15.00 - 18.87% to 5.86 - 10.70% and hardness from 4.36 - 5.70 kg to 1.71 - 2.05 kg. The increase of degree of crystallinity correlated positively with the increase of hardness of rice analogues (r = 0.746, p = 0.05).

Groundwater resources monitoring and population displacement in northern Uganda

NASA Astrophysics Data System (ADS)

Chalikakis, K.; Hammache, Y.; Nawa, A.; Slinski, K.; Petropoulos, G.; Muteesasira, A.

2009-04-01

Northern Uganda has been devastated by more than 20 years of open conflict by the LRA (Lord's Resistance Army) and the Government of Uganda. This war has been marked by extreme violence against civilians, who had been gathered in protected IDP (Internally Displaced Persons) camps. At the height of the displacement in 2007, the UN office for coordination of humanitarian affairs, estimated that nearly 2.5 million people were interned into approximately 220 camps throughout Northern Uganda. With the improved security since mid-2006, the people displaced by the conflict in Northern Uganda started to move out of the overcrowded camps and return either to their villages/parishes of origin or to resettlement/transit sites. However, basic water, sanitation and hygiene infrastructure in the return areas or any new settlements sites are minimal. People returning to their villages of origin encounter a situation where in many cases there is no access to safe water. Since 1998 ACF (Action Against Hunger, part of the Action Contre la Faim International Network) activities have been concentrated in the Acholi and Lango regions of Northern Uganda. ACF's WASH (Water, sanitation and hygiene) department interventions concern sanitation infrastructure, hygiene education and promotion as well as water points implementation. To ensure safe water access, actions are focused in borehole construction and traditional spring rehabilitation, also called "protected" springs. These activities follow the guidelines as set forth by the international WASH cluster, led by UNICEF. A three year project (2008-2010) is being implemented by ACF, to monitor the available groundwater resources in Northern Uganda. The main objectives are: 1. to monitor the groundwater quality from existing water points during different hydrological seasons, 2. to identify, if any, potential risks of contamination from population concentrations and displacement, lack of basic infrastructure and land use, and finally 3. to

United against cancer: prevention to end-of-life care-highlights from the Uganda Cancer Institute-Palliative Care Association of Uganda Joint International Conference on Cancer and Palliative Care and the 7th Palliative Care Conference, 24-25 August 2017, Kampala, Uganda.

PubMed

Downing, Julia; Ddungu, Henry; Kiyange, Fatia; Batuli, Mwazi; Kafeero, James; Kebirungi, Harriet; Kiwanuka, Rose; Mugisha, Noleb; Mwebesa, Eddie; Mwesiga, Mark; Namukwaya, Elizabeth; Niyonzima, Nixon; Phipps, Warren; Orem, Jackson

2017-01-01

The Uganda Cancer Institute (UCI) and the Palliative Care Association of Uganda (PCAU) jointly hosted an international conference on cancer and palliative care in August 2017 in Kampala, Uganda. At the heart of the conference rested a common commitment to see patient care improved across Uganda and the region. The theme - United Against Cancer: Prevention to End-of-Life Care - reflected this joint vision and the drive to remember that cancer care should include prevention, early diagnosis and screening, treatment, rehabilitation and palliative care. The conference brought together 451 delegates from 17 countries. The key themes of the conference included: the importance of the World Health Assembly Resolutions on Palliative Care (2014) and cancer care (2017); the need to develop a National Cancer Control Programme; strategies for effective cancer diagnosis and treatment in low- and middle-income countries; advocacy, human rights and access to essential medicines, including access to opioids and nurse prescribing; paediatric care; leadership and commitment; collaboration; resources (financial and human), the recognition that palliative care is not limited to cancer care and the importance of learning from each other. The conference also gave the opportunity to celebrate the 50th Anniversary of the UCI, with a celebration dinner attended by the Minister of Health and the US Ambassador. Participants reported that the conference was a forum that updated them in all aspects of cancer and palliative care, which challenged their knowledge, and was enlightening in terms of current treatment options for individuals with cancer. The benefits of having a joint conference were recognised, allowing for further networking between cancer and palliative care organisations. This conference, highlighting many developments in cancer and palliative care, served as a unique opportunity to bring people together and unite them in developing cancer and palliative care.

The effect of facility-based antiretroviral therapy programs on outpatient services in Kenya and Uganda.

PubMed

Wollum, Alexandra; Dansereau, Emily; Fullman, Nancy; Achan, Jane; Bannon, Kelsey A; Burstein, Roy; Conner, Ruben O; DeCenso, Brendan; Gasasira, Anne; Haakenstad, Annie; Hanlon, Michael; Ikilezi, Gloria; Kisia, Caroline; Levine, Aubrey J; Masters, Samuel H; Njuguna, Pamela; Okiro, Emelda A; Odeny, Thomas A; Allen Roberts, D; Gakidou, Emmanuela; Duber, Herbert C

2017-08-16

Considerable debate exists concerning the effects of antiretroviral therapy (ART) service scale-up on non-HIV services and overall health system performance in sub-Saharan Africa. In this study, we examined whether ART services affected trends in non-ART outpatient department (OPD) visits in Kenya and Uganda. Using a nationally representative sample of health facilities in Kenya and Uganda, we estimated the effect of ART programs on OPD visits from 2007 to 2012. We modeled the annual percent change in non-ART OPD visits using hierarchical mixed-effects linear regressions, controlling for a range of facility characteristics. We used four different constructs of ART services to capture the different ways in which the presence, growth, overall, and relative size of ART programs may affect non-ART OPD services. Our final sample included 321 health facilities (140 in Kenya and 181 in Uganda). On average, OPD and ART visits increased steadily in Kenya and Uganda between 2007 and 2012. For facilities where ART services were not offered, the average annual increase in OPD visits was 4·2% in Kenya and 13·5% in Uganda. Among facilities that provided ART services, we found average annual OPD volume increases of 7·2% in Kenya and 5·6% in Uganda, with simultaneous annual increases of 13·7% and 12·5% in ART volumes. We did not find a statistically significant relationship between annual changes in OPD services and the presence, growth, overall, or relative size of ART services. However, in a subgroup analysis, we found that Ugandan hospitals that offered ART services had statistically significantly less growth in OPD visits than Ugandan hospitals that did not provide ART services. Our findings suggest that ART services in Kenya and Uganda did not have a statistically significant deleterious effects on OPD services between 2007 and 2012, although subgroup analyses indicate variation by facility type. Our findings are encouraging, particularly given recent recommendations

Out of Africa: Uganda and UNAIDS advance a bold experiment.

PubMed

Zuniga, J

1999-10-01

The UNAIDS HIV Drug Access Initiative was launched in 1997 to aid four resource-limited countries: Chile, Cote d'Ivoire, Uganda, and Viet Nam. This multipronged initiative between pharmaceutical companies and government officials aims to expand access to HIV-related drugs on a small, sustainable scale in developing countries. Uganda's experience in the implementation of the UNAIDS HIV Drug Access Initiative is presented. Ugandan President Yoweri Museveni was struck by the reality of AIDS in 1986 when he learned that up to 25 percent of Ugandan troops might be HIV-infected. The overall Ugandan incidence of AIDS has been reduced since that time from 30 percent to about 14.5 percent due, in part, to cooperation between government and international institutions. Various charts are included, indicating cost estimates for the delivery of HIV care, and a flow chart diagrams drug procurement from six pharmaceutical companies for distribution to Ugandans living with HIV/AIDS. Minister of Health Crispus Kiyonga appointed a 15-member National Advisory Board in 1998 that established subcommittees on Drug Policy and Financing, Care and Practice, and Vertical Transmission to implement and oversee responsibilities. The establishment of Uganda's antiretroviral (ARV) treatment guidelines, standards, and educational and treatment efforts are discussed.

Formation of Acridones by Ethylene Extrusion in the Reaction of Arynes with β-Lactams and Dihydroquinolinones

PubMed Central

Fang, Yuesi; Rogness, Donald C.; Larock, Richard C.; Shi, Feng

2012-01-01

N-Unsubstituted β-lactams react with a molecule of aryne by insertion into the amide bond to form a 2,3-dihydroquinolin-4-one, which subsequently reacts with another molecule of aryne to form an acridone by extrusion of a molecule of ethylene. 2,3-Dihydroquinolin-4-ones react under the same reaction conditions to afford identical results. This is the first example of ethylene extrusion in aryne chemistry. PMID:22742883

Partners' controlling behaviors and intimate partner sexual violence among married women in Uganda.

PubMed

Wandera, Stephen Ojiambo; Kwagala, Betty; Ndugga, Patricia; Kabagenyi, Allen

2015-03-04

Studies on the association between partners' controlling behaviors and intimate partner sexual violence (IPSV) in Uganda are limited. The aim of this paper was to investigate the association between IPSV and partners' controlling behaviors among married women in Uganda. We used the 2011 Uganda Demographic and Health Survey (UDHS) data, and selected a weighted sample of 1,307 women who were in a union, out of those considered for the domestic violence module. We used chi-squared tests and multivariable logistic regressions to investigate the factors associated with IPSV, including partners' controlling behaviors. More than a quarter (27%) of women who were in a union in Uganda reported IPSV. The odds of reporting IPSV were higher among women whose partners were jealous if they talked with other men (OR = 1.81; 95% CI: 1.22-2.68), if their partners accused them of unfaithfulness (OR = 1.50; 95% CI: 1.03-2.19) and if their partners did not permit them to meet with female friends (OR = 1.63; 95% CI: 1.11-2.39). The odds of IPSV were also higher among women whose partners tried to limit contact with their family (OR = 1.73; 95% CI: 1.11-2.67) and often got drunk (OR = 1.80; 95% CI: 1.15-2.81). Finally, women who were sometimes or often afraid of their partners (OR = 1.78; 95% CI: 1.21-2.60 and OR = 1.56; 95% CI: 1.04-2.40 respectively) were more likely to report IPSV. In Uganda, women's socio-economic and demographic background and empowerment had no mitigating effect on IPSV in the face of their partners' dysfunctional behaviors. Interventions addressing IPSV should place more emphasis on reducing partners' controlling behaviors and the prevention of problem drinking.

Serological and molecular investigation for brucellosis in swine in selected districts of Uganda.

PubMed

Erume, Joseph; Roesel, Kristina; Dione, Michel M; Ejobi, Francis; Mboowa, Gerald; Kungu, Joseph M; Akol, Joyce; Pezo, Danilo; El-Adawy, Hosny; Melzer, Falk; Elschner, Mandy; Neubauer, Heinrich; Grace, Delia

2016-08-01

Brucellosis is a notifiable zoonotic disease affecting livestock, humans, and wildlife in Uganda. Pigs can be infected with human pathogenic Brucella suis biovars 1 and 3 and can be a significant source of brucellosis for humans. Uganda has a rapidly growing pig population, and the pork consumption per capita is the highest in East Africa. The objective of this work was to determine the seroprevalence of brucellosis in Ugandan pigs. A cross-sectional serosurvey of pigs was conducted in three of the major pig-keeping districts in Uganda (Masaka (n = 381 samples), Mukono (n = 398), and Kamuli (n = 414)). In addition, pigs originating from these districts were sampled in the major pig abattoir in Kampala (n = 472). In total, 1665 serum samples were investigated by serological and molecular tests. Only three putative brucellosis-positive samples were detected serologically using indirect ELISA. These sera were found negative for Brucella antibodies by CFT; however, two had antibodies against Yersinia enterocolitica as determined by SAT. Presence of antibodies against Yersiniae was confirmed by Y. enterocolitica antibody-specific ELISA. The two Yersiniae ELISA-positive samples were brucellosis negative using real-time PCR. We tested additional 142 sera from the 1665 samples with real-time PCR. All tested negative. Under this type of production system, we expect a maximum B. suis prevalence of less than 1 % at 95 % confidence level, and therefore, the risk of acquiring brucellosis from the pigs or their products is negligible. However, pigs may harbor the zoonotic Y. enterocolitica. This is the first study to investigate the occurrence of brucellosis in pigs in Uganda and the first study to report Y. enterocolitica antibodies in swine in Uganda.

Biaxial extrusion of polyimide LARC-TPI and LARC-TPI blends

NASA Technical Reports Server (NTRS)

Haghighat, R. Ross; Elandjian, Lucy; Lusignea, Richard W.

1990-01-01

Biaxial films of polyimide LARC-TPI and LARC-TPI/liquid crystal polymer Xydar were extruded directly from the melt for the first time via an innovative extrusion technique. Three types of films, neat LARC-TPI, LARC-TPI/10 wt pct and 30 wt pct blends were processed as a part of this NASA-funded program. Processability was greatly enhanced by incorporating Xydar. The coefficient of thermal expansion was reduced from 34 ppm/C for the neat LARC-TPI to 15 ppm/C for the 10 wt pct Xydar blend and ultimately down to 1 to 3 ppm/C for the 30 wt pct blend films in the direction of extrusion. The maximum improvement in stiffness was realized by incorporating 10 wt pct Xydar (2.8 GPa up to 4.9 GPa). Tensile strength, however, experienced a drop as a result of Xydar addition, probably caused by inefficient mixing of the two phases.

Obtaining ready-to-eat blue corn expanded snacks with anthocyanins using an extrusion process and response surface methodology.

PubMed

Escalante-Aburto, Anayansi; Ramírez-Wong, Benjamín; Torres-Chávez, Patricia Isabel; López-Cervantes, Jaime; Figueroa-Cárdenas, Juan de Dios; Barrón-Hoyos, Jesús Manuel; Morales-Rosas, Ignacio; Ponce-García, Néstor; Gutiérrez-Dorado, Roberto

2014-12-15

Extrusion is an alternative technology for the production of nixtamalized products. The aim of this study was to obtain an expanded nixtamalized snack with whole blue corn and using the extrusion process, to preserve the highest possible total anthocyanin content, intense blue/purple coloration (color b) and the highest expansion index. A central composite experimental design was used. The extrusion process factors were: feed moisture (FM, 15%-23%), calcium hydroxide concentration (CHC, 0%-0.25%) and final extruder temperature (T, 110-150 °C). The chemical and physical properties evaluated in the extrudates were moisture content (MC, %), total anthocyanins (TA, mg·kg(-1)), pH, color (L, a, b) and expansion index (EI). ANOVA and surface response methodology were applied to evaluate the effects of the extrusion factors. FM and T significantly affected the response variables. An optimization step was performed by overlaying three contour plots to predict the best combination region. The extrudates were obtained under the following optimum factors: FM (%) = 16.94, CHC (%) = 0.095 and T (°C) = 141.89. The predicted extrusion processing factors were highly accurate, yielding an expanded nixtamalized snack with 158.87 mg·kg(-1) TA (estimated: 160 mg·kg(-1)), an EI of 3.19 (estimated: 2.66), and color parameter b of -0.44 (estimated: 0.10).

Application of hot melt extrusion for improving bioavailability of artemisinin a thermolabile drug.

PubMed

Kulkarni, C; Kelly, A L; Gough, T; Jadhav, V; Singh, K K; Paradkar, A

2018-02-01

Hot melt extrusion has been used to produce a solid dispersion of the thermolabile drug artemisinin. Formulation and process conditions were optimized prior to evaluation of dissolution and biopharmaceutical performance. Soluplus ® , a low T g amphiphilic polymer especially designed for solid dispersions enabled melt extrusion at 110 °C although some drug-polymer incompatibility was observed. Addition of 5% citric acid as a pH modifier was found to suppress the degradation. The area under plasma concentration time curve (AUC 0-24h ) and peak plasma concentration (C max ) were four times higher for the modified solid dispersion compared to that of pure artemisinin.

Mineral potential for incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites in the Islamic Republic of Mauritania (phase V, deliverable 87): Chapter Q in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Taylor, Cliff D.; Giles, Stuart A.

2015-01-01

USGS review of PRISM-I data suggests that there is abundant documentation of the Bou Naga alkaline complex and to a lesser degree, the Guelb er Richat carbonatite complex, but that all other occurrences of U, Th, REE, and associated elements are poorly described, and poorly understood (Taylor, 2007)

Science Teachers' Understanding and Practice of Inquiry-Based Instruction in Uganda

NASA Astrophysics Data System (ADS)

Ssempala, Fredrick

High school students in Uganda perform poorly in science subjects despite the Ugandan government's efforts to train science teachers and build modern science laboratories in many public high schools. The poor performance of students in science subjects has been largely blamed on the inability by many science teachers to teach science through Inquiry-Based Instruction (IBI) to motivate the students to learn science. However, there have been no empirical studies done to establish the factors that influence science teachers' understanding and practice of IBI in Uganda. Most of the published research on IBI has been conducted in developed countries, where the prevailing contexts are very different from the contexts in developing countries such as Uganda. Additionally, few studies have explored how professional development (PD) training workshops on inquiry and nature of science (NOS) affect chemistry teachers' understanding and practice of IBI. My purpose in this multi-case exploratory qualitative study was to explore the effect of a PD workshop on inquiry and NOS on chemistry teachers' understanding and practice of IBI in Kampala city public schools in Uganda. I also explored the relationship between chemistry teachers' NOS understanding and the nature of IBI implemented in their classrooms and the internal and external factors that influence teachers' understanding and practice of IBI. I used a purposive sampling procedure to identify two schools of similar standards from which I selected eight willing chemistry teachers (four from each school) to participate in the study. Half of the teachers (those from School A) attended the PD workshop on inquiry and NOS for six days, while the control group (those from School B) did not. I collected qualitative data through semi-structured interviews, classroom observation, and document analysis. I analyzed these data by structural, conceptual and theoretical coding approach. I established that all the participating chemistry

Effect of combined extrusion parameters on mechanical properties of basalt fiber-reinforced plastics based on polypropylene

NASA Astrophysics Data System (ADS)

Bashtannik, P. I.; Ovcharenko, V. G.; Boot, Yu. A.

1997-11-01

Basalt fibers are efficient reinforcing fillers for polypropylene because they increase both the mechanical and the tribotechnical properties of composites. Basalt fibers can compete with traditional fillers (glass and asbestos fibers) of polypropylene with respect to technological, economic, and toxic properties. The effect of technological parameters of producing polypropylene-based basalt fiber-reinforced plastics (BFRPs) by combined extrusion on their mechanical properties has been investigated. The extrusion temperature was found to be the main parameter determining the mechanical properties of the BFRPs. With temperature growth from 180 to 240°C, the residual length of the basalt fibers in the composite, as well as the adhesive strength of the polymer-fiber system, increased, while the composite defectiveness decreased. The tensile strength and elastic modulus increased from 35 to 42 MPa and 3.2 to 4.2 GPa, respectively. At the same time, the growth in composite solidity led to its higher brittleness. Thus, a higher temperature of extrusion allows us to produce materials which can be subjected to tensile and bending loads, while the materials produced at a lower temperature of extrusion are impact stable. The effect of the gap size between the extruder body and moving disks on the mechanical properties of the BFRPs is less significant than that of temperature. An increase of the gap size from 2 to 8 mm improves the impregnation quality of the fibers, but the extruder productivity diminishes. The possibility of controling the properties of reinforced polypropylene by varying the technological parameters of combined extrusion is shown. The polypropylene-based BFRPs produced by the proposed method surpass the properties of glass and asbestos fiber-reinforced plastics.

Influence of Punch Geometry on Process Parameters in Cold Backward Extrusion

NASA Astrophysics Data System (ADS)

Plančak, M.; Barišić, B.; Car, Z.; Movrin, D.

2011-01-01

In cold extrusion of steel tools make direct contact with the metal to be extruded. Those tools are exposed to high contact stresses which, in certain cases, may be limiting factors in applying this technology. The present paper was bound to the influence of punch head design on radial stress at the container wall in the process of cold backward extrusion. Five different punch head geometries were investigated. Radial stress on the container wall was measured by pin load cell technique. Special tooling for the experimental investigation was designed and made. Process has been analyzed also by FE method. 2D models of tools were obtained by UGS NX and for FE analysis Simufact Forming GP software was used. Obtained results (experimental and obtained by FE) were compared and analyzed. Optimal punch head geometry has been suggested.

Development of Thin-Walled Magnesium Alloy Extrusions for Improved Crash Performance Based Upon Texture Control

NASA Astrophysics Data System (ADS)

Williams, Bruce W.; Agnew, Sean R.; Klein, Robert W.; McKinley, Jonathan

Recent investigations suggest that it is possible to achieve dramatic modifications to both strength and ductility of magnesium alloys through a combination of alloying, grain refinement, and texture control. The current work explores the possibility of altering the texture in extruded thin-walled magnesium alloy tubes for improved ductility during axial crush in which energy is absorbed through progressive buckling. The texture evolution was predicted using the viscoplastic self-consistent (VPSC) crystal plasticity model, with strain path input from continuum-based finite element simulations of extrusion. A limited diversity of textures can be induced by altering the strain path through the extrusion die design. In some cases, such as for simple bar extrusion, the textures predicted can be connected with simple shape change. In other cases, a subtle influence of strain path involving shear-reverse-shear is predicted. The most promising textures predicted for a variety of strain paths are selected for subsequent experimental study.

Graft extrusion in both the coronal and sagittal planes is greater after medial compared with lateral meniscus allograft transplantation but is unrelated to early clinical outcomes.

PubMed

Lee, Dae-Hee; Lee, Chang-Rack; Jeon, Jin-Ho; Kim, Kyung-Ah; Bin, Seong-Il

2015-01-01

Graft extrusion after meniscus allograft transplantation (MAT) may be affected by horn fixation, which differs between medial and lateral MAT. Few studies have compared graft extrusion, especially sagittal extrusion, after medial and lateral MAT. In patients undergoing medial and lateral MAT, graft extrusion is likely similar and not correlated with postoperative Lysholm scores. Cohort study; Level of evidence, 2. Meniscus graft extrusion in the coronal and sagittal planes was compared in 51 knees undergoing medial MAT and 84 undergoing lateral MAT. Distances from the anterior and posterior articular cartilage margins to the anterior (anterior cartilage meniscus distance [ACMD]) and posterior (posterior cartilage meniscus distance [PCMD]) horns, respectively, were assessed on immediate postoperative magnetic resonance imaging and compared in patients undergoing medial and lateral MAT. Correlations between coronal and sagittal graft extrusion and between extrusion and the Lysholm score were compared in the 2 groups. In the coronal plane, mean absolute (4.3 vs 2.7 mm, respectively; P<.001) and relative (39% vs 21%, respectively; P<.001) graft extrusions were significantly greater for medial than lateral MAT. In the sagittal plane, mean absolute and relative ACMD and PCMD values were significantly greater for medial than lateral MAT (P<.001 each). For both medial and lateral MAT, mean absolute and relative ACMDs were significantly larger than PCMDs (P<.001 each). Graft extrusion>3 mm in the coronal plane was significantly more frequent in the medial (78%) than in the lateral (35%) MAT group. In the sagittal plane, the frequencies of ACMDs (72% vs 39%, respectively) and PCMDs (23% vs 4%, respectively) >3 mm were also significantly greater in the medial than in the lateral MAT group. Coronal and sagittal extrusions were not correlated with postoperative Lysholm scores for both medial and lateral MAT. The amount and incidence of graft extrusion were greater after medial

Extrusion Bioprinting of Shear-Thinning Gelatin Methacryloyl Bioinks

PubMed Central

Liu, Wanjun; Heinrich, Marcel A.; Zhou, Yixiao; Akpek, Ali; Hu, Ning; Liu, Xiao; Guan, Xiaofei; Zhong, Zhe; Jin, Xiangyu

2017-01-01

Bioprinting is an emerging technique for the fabrication of three-dimensional (3D) cell-laden constructs. However, the progress for generating a 3D complex physiological microenvironment has been hampered by a lack of advanced cell-responsive bioinks that enable bioprinting with high structural fidelity, particularly in the case of extrusion-based bioprinting. Herein, we report a novel strategy to directly bioprint cell-laden constructs using bioinks made of gelatin methacryloyl (GelMA) physical gels (GPGs). Attributed to their shear-thinning and self-healing properties, the GPG bioinks could retain the shape and form integral structures after deposition, allowing for subsequent UV crosslinking for permanent stabilization. We showed the structural fidelity by bioprinting various 3D structures that are typically challenging to fabricate using conventional bioinks under extrusion modes. Moreover, the use of the GPG bioinks enabled direct bioprinting of highly porous and soft constructs at relatively low concentrations (down to 3%) of GelMA. We also demonstrated that the bioprinted constructs not only permitted cell survival but also enhanced cell proliferation as well as spreading at lower concentrations of the GPG bioinks. We believe our strategy of bioprinting will provide many opportunities in convenient fabrication of 3D cell-laden constructs for applications in tissue engineering, regenerative medicine, and pharmaceutical screening. PMID:28464555

Cost-effectiveness of traffic enforcement: case study from Uganda.

PubMed

Bishai, D; Asiimwe, B; Abbas, S; Hyder, A A; Bazeyo, W

2008-08-01

In October 2004, the Ugandan Police department deployed enhanced traffic safety patrols on the four major roads to the capital Kampala. To assess the costs and potential effectiveness of increasing traffic enforcement in Uganda. Record review and key informant interviews were conducted at 10 police stations along the highways that were patrolled. Monthly data on traffic citations and casualties were reviewed for January 2001 to December 2005; time series (ARIMA) regression was used to assess for a statistically significant change in traffic deaths. Costs were computed from the perspective of the police department in $US 2005. Cost offsets from savings to the health sector were not included. The annual cost of deploying the four squads of traffic patrols (20 officers, four vehicles, equipment, administration) is estimated at $72,000. Since deployment, the number of citations has increased substantially with a value of $327 311 annually. Monthly crash data pre- and post-intervention show a statistically significant 17% drop in road deaths after the intervention. The average cost-effectiveness of better road safety enforcement in Uganda is $603 per death averted or $27 per life year saved discounted at 3% (equivalent to 9% of Uganda's $300 GDP per capita). The costs of traffic safety enforcement are low in comparison to the potential number of lives saved and revenue generated. Increasing enforcement of existing traffic safety norms can prove to be an extremely cost-effective public health intervention in low-income countries, even from a government perspective.

Organic livestock production in Uganda: potentials, challenges and prospects.

PubMed

Nalubwama, Sylvia Muwanga; Mugisha, Anthony; Vaarst, Mette

2011-04-01

Development in organic farming has been stimulated by farmers and consumers becoming interested in healthy food products and sustainable environment. Organic agriculture is a holistic production management system which is based on the principles of health, ecology, care, and fairness. Organic development in Uganda has focused more on the crop sector than livestock sector and has primarily involved the private sector, like organic products export companies and non-governmental organizations. Agriculture in Uganda and many African countries is predominantly traditional, less mechanized, and is usually associated with minimum use of chemical fertilizers, pesticides, and drugs. This low external input agriculture also referred to as "organic by default" can create basis for organic farming where agroecological methods are introduced and present an alternative in terms of intensification to the current low-input/low-output systems. Traditional farming should not be confused with organic farming because in some cases, the existing traditional practices have consequences like overstocking and less attention to soil improvement as well as to animal health and welfare, which is contrary to organic principles of ecology, fairness, health, and care. Challenges of implementing sustainable organic practices in the Ugandan livestock sector threaten its future development, such as vectors and vector-borne diseases, organic feed insufficiency, limited education, research, and support to organic livestock production. The prospects of organic livestock development in Uganda can be enhanced with more scientific research in organic livestock production under local conditions and strengthening institutional support.

Non-Formal Education and Livelihood Skills for Marginalised Street and Slum Youth in Uganda. Project Report

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization (UNESCO), 2006

2006-01-01

The Building Capacities for Non formal Education and Life Skills Programmes project in Uganda was implemented by Uganda Youth Development Link (UYDEL) with financial and technical support from UNESCO--Section for Literacy and non Formal Education in 2004-05; aiming at assisting vulnerable and marginalised youth affected by HIV/AIDS and other risk…

Factors Associated with Perceived Stigma among People Living with HIV/AIDS in Post-Conflict Northern Uganda

ERIC Educational Resources Information Center

Nattabi, Barbara; Li, Jianghong; Thompson, Sandra C.; Orach, Christopher G.; Earnest, Jaya

2011-01-01

HIV-related stigma continues to persist in several African countries including Uganda. This study quantified the burden of stigma and examined factors associated with stigma among 476 people living with HIV (PLHTV) in Gulu, northern Uganda. Data were collected between February and May 2009 using the HIV/AIDS Stigma Instrument-PLWA. Females more…

A Case Study of Cooperative Learning in Bushenyi District in Uganda: Educational Leaders' and Teachers' Perceptions

ERIC Educational Resources Information Center

Mujuni, John Bosco

2015-01-01

In 2003-2007, the government of Uganda through the Ministry of Education and Sports (MoES), under the umbrella of UPHOLD and in Partnership with USAID, introduced cooperative learning as a "student-centered teaching approach" in some selected districts and schools in Uganda. This dissertation explored the current state and practice of…

Preparation of Imide Oligomers via Concurrent Reactive Extrusion

NASA Technical Reports Server (NTRS)

Avakian, Roger W. (Inventor); Hu, Ling (Inventor)

2018-01-01

Reactive extrusion can be used in a continuous, solvent-less preparation of imide oligomers involving two competing reactions among three ingredients, the first reaction between a dianhydride and a diamine and the second reaction between an endcap and the same diamine. The imide oligomer can form a composite via conventional production methods or via formation of a film from imide oligomer re-melted in an extruder before being impregnated into tape or fabric.

Effects of Hot-Hydrostatic Canned Extrusion on the Stock Utilization, Microstructure and Mechanical Properties of TiBw/TC4 Composites with Quasi-Continuous Network

PubMed Central

Feng, Yangju; Li, Bing; Cui, Guorong; Zhang, Wencong

2017-01-01

In-situ TiB whisker-reinforced Ti–6Al–4V (TC4) titanium matrix composites (TiBw/TC4) with quasi-continuous networks were successfully fabricated by vacuum hot-pressing sintering. The effects of the hot-hydrostatic canned extrusion on stock utilization, microstructure and mechanical properties of the TiBw/TC4 composites were investigated. It was satisfactory that the utilization of composites could be obviously improved by canned extrusion compared to that extruded without canned extrusion. The microstructure results showed that after canned extrusion the grain was refined and the TiB whiskers were distributed from a random array state to a state in which the whiskers were distributed along the extrusion direction. The properties testing results revealed that the tensile strength, the hardness and the ductility of the composites all significantly improved after extrusion due to the grain refinement and orientation of the TiB whisker caused by extrusion. Tensile fracture results showed that when the TiB whiskers were randomly distributed only part of them played a role in strengthening the matrix during the deformation process (as-sintered composites), while when the TiB whiskers were oriented all whiskers could strengthen the matrix during the tensile testing process (as-extruded composites). PMID:29068416

Effects of Hot-Hydrostatic Canned Extrusion on the Stock Utilization, Microstructure and Mechanical Properties of TiBw/TC4 Composites with Quasi-Continuous Network.

PubMed

Feng, Yangju; Li, Bing; Cui, Guorong; Zhang, Wencong

2017-10-25

In-situ TiB whisker-reinforced Ti-6Al-4V (TC4) titanium matrix composites (TiBw/TC4) with quasi-continuous networks were successfully fabricated by vacuum hot-pressing sintering. The effects of the hot-hydrostatic canned extrusion on stock utilization, microstructure and mechanical properties of the TiBw/TC4 composites were investigated. It was satisfactory that the utilization of composites could be obviously improved by canned extrusion compared to that extruded without canned extrusion. The microstructure results showed that after canned extrusion the grain was refined and the TiB whiskers were distributed from a random array state to a state in which the whiskers were distributed along the extrusion direction. The properties testing results revealed that the tensile strength, the hardness and the ductility of the composites all significantly improved after extrusion due to the grain refinement and orientation of the TiB whisker caused by extrusion. Tensile fracture results showed that when the TiB whiskers were randomly distributed only part of them played a role in strengthening the matrix during the deformation process (as-sintered composites), while when the TiB whiskers were oriented all whiskers could strengthen the matrix during the tensile testing process (as-extruded composites).

Analyzing the extrusion mould for aluminum profile

NASA Astrophysics Data System (ADS)

Yun, Wang; Xu, Zhenying; Dai, Yachun; Dong, Peilong; Yuan, Guoding; Lan, Cai

2007-12-01

The die or mould used for extruding aluminum wallboard profile is in serious work conditions, so it is easy to appear drawbacks in the mould such as non-uniform stress and strain distributions, crack initiation and propagation, elastic warp, and even plastic distortion. As we know, the extrusion die or mould is subject to complex loads including the extrusion pressure, friction and thermal load, which make the mould complicated and hard to be designed and analyzed by using conventional analytical method. In this paper, we applied Deform-3D, FEA (Finite Element Analysis) software used frequently in all engineering fields, to simulate three-dimensional extruding process of aluminum profile. The simulation results show that the deformation increases gradually from inside to outside. Exterior deformation contour distribution is relative uniform since the influence of inner holes on deformation is small, and the contour form is regular and similar with the shape of the mould. However, the interior deformation contour is irregular as the influence of holes with basically symmetric equivalent curves. At the middle of the mould, the deformation reaches the largest, it reaches 0.633mm. The deformation of the mould can be reduced by increasing the distance between two holes or increasing thickness of the mould. Experiment result accords with simulation. The simulation process and results ensure the feasibility of finite element method, providing the support for mould design and structural optimization.

Intra-continental subduction and contemporaneous lateral extrusion of the upper plate: insights into Alps-Adria interactions

NASA Astrophysics Data System (ADS)

van Gelder, Inge; Willingshofer, Ernst; Sokoutis, Dimitrios; Cloetingh, Sierd

2017-04-01

A series of physical analogue experiments were performed to simulate intra-continental subduction contemporaneous with lateral extrusion of the upper plate to study the interferences between these two processes at crustal levels and in the lithospheric mantle. The lithospheric-scale models are specifically designed to represent the collision of the Adriatic microplate with the Eastern Alps, simulated by an intra-continental weak zone to initiate subduction and a weak confined margin perpendicular to the direction of convergence in order to allow for extrusion of the lithosphere. The weak confined margin is the analog for the opening of the Pannonian back-arc basin adjacent to the Eastern Alps with the direction of extension perpendicular to the strike of the orogen. The models show that intra-continental subduction and coeval lateral extrusion of the upper plate are compatible processes. The obtained deformation structures within the extruding region are similar compared to the classical setup where lateral extrusion is provoked by lithosphere-scale indentation. In the models a strong coupling across the subduction boundary allows for the transfer of abundant stresses to the upper plate, leading to laterally varying strain regimes that are characterized by crustal thickening near a confined margin and dominated by lateral displacement of material near a weak lateral confinement. During ongoing convergence the strain regimes propagate laterally, thereby creating an area of overlap characterized by transpression. In models with oblique subduction, with respect to the convergence direction, less deformation of the upper plate is observed and as a consequence the amount of lateral extrusion decreases. Additionally, strain is partitioned along the oblique plate boundary leading to less subduction in expense of right lateral displacement close to the weak lateral confinement. Both oblique and orthogonal subduction models have a strong resemblance to lateral extrusion

The Role of Private Universities in the Provision of Higher Education in Uganda: Growth and Challenges

ERIC Educational Resources Information Center

Mugabi, H.

2012-01-01

Although the first private university in Uganda was founded in 1988 and the private university sector has since grown rapidly to become one of the most prominent features of higher education (HE) in Uganda, the contribution of private universities (PUs) to the provision of HE has remained largely unexplored and as such, less understood. The…

Concentrations and toxicity of fumonisin B1 in fermented corn grits are reduced by extrusion cooking with glucose supplementation

USDA-ARS?s Scientific Manuscript database

Extrusion is a cooking method in which dough is forced under high pressure through a heated barrel using one (single-screw configuration) or two (twin-screw configuration) augers. In an earlier experiment (Voss et al., J. Food Protec. 71: 2036-2041, 2008), extrusion using the single screw configura...

Disc extrusions and bulges in nonspecific low back pain and sciatica: Exploratory randomised controlled trial comparing yoga therapy and normal medical treatment.

PubMed

Monro, Robin; Bhardwaj, Abhishek Kumar; Gupta, Ram Kumar; Telles, Shirley; Allen, Beth; Little, Paul

2015-01-01

Previous trials of yoga therapy for nonspecific low back pain (nsLBP) (without sciatica) showed beneficial effects. To test effects of yoga therapy on pain and disability associated with lumbar disc extrusions and bulges. Parallel-group, randomised, controlled trial. Sixty-one adults from rural population, aged 20-45, with nsLBP or sciatica, and disc extrusions or bulges. Randomised to yoga (n=30) and control (n=31). Yoga: 3-month yoga course of group classes and home practice, designed to ensure safety for disc extrusions. normal medical care. OUTCOME MEASURES (3-4 months) Primary: Roland Morris Disability Questionnaire (RMDQ); worst pain in past two weeks. Secondary: Aberdeen Low Back Pain Scale; straight leg raise test; structural changes. Disc projections per case ranged from one bulge or one extrusion to three bulges plus two extrusions. Sixty-two percent had sciatica. Intention-to-treat analysis of the RMDQ data, adjusted for age, sex and baseline RMDQ scores, gave a Yoga Group score 3.29 points lower than Control Group (0.98, 5.61; p=0.006) at 3 months. No other significant differences in the endpoints occurred. No adverse effects of yoga were reported. Yoga therapy can be safe and beneficial for patients with nsLBP or sciatica, accompanied by disc extrusions and bulges.

Exploring stigma as a barrier to cancer service engagement with breast cancer survivors in Kampala, Uganda.

PubMed

Meacham, Elizabeth; Orem, Jackson; Nakigudde, Gertrude; Zujewski, Jo Anne; Rao, Deepa

2016-10-01

To understand the role of stigma in the delay of cancer service engagement by women with breast cancer in Kampala, Uganda. Women in Sub-Saharan African countries are twice as likely to die from cancer as women in high-income countries, which is largely attributable to late diagnosis. While breast cancer-related stigma has been identified in Sub-Saharan Africa, limited research focuses on how stigma impacts the behavior of breast cancer patients in Uganda. This qualitative study used a grounded theory approach to examine illness narratives from 20 breast cancer survivors in Uganda, gathered through semistructured interviews. Thematic analysis showed that perceived and internalized stigma associated with breast cancer influenced care engagement throughout illness, delaying engagement and inhibiting treatment completion. Women identified key factors for overcoming stigma including acceptance of diagnosis, social support, and understanding of breast cancer. The growing burden of mortality associated with breast cancer in Uganda can be mitigated by improving early detection and treatment engagement through interventions which account for key psychosocial barriers such as stigma. Copyright © 2016 John Wiley & Sons, Ltd.

Effect of extrusion processing on the microstructure, mechanical properties, biocorrosion properties and antibacterial properties of Ti-Cu sintered alloys.

PubMed

Zhang, Erlin; Li, Shengyi; Ren, Jing; Zhang, Lan; Han, Yong

2016-12-01

Ti-Cu sintered alloys, Ti-Cu(S) alloy, have exhibited good anticorrosion resistance and strong antibacterial properties, but low ductility in previous study. In this paper, Ti-Cu(S) alloys were subjected to extrusion processing in order to improve the comprehensive property. The phase constitute, microstructure, mechanical property, biocorrosion property and antibacterial activity of the extruded alloys, Ti-Cu(E), were investigated in comparison with Ti-Cu(S) by X-ray diffraction (XRD), optical microscopy (OM), scanning electronic microscopy (SEM) with energy disperse spectroscopy (EDS), mechanical testing, electrochemical testing and plate-count method in order to reveal the effect of the extrusion process. XRD, OM and SEM results showed that the extrusion process did not change the phase constitute but refined the grain size and Ti2Cu particle significantly. Ti-Cu(E) alloys exhibited higher hardness and compressive yield strength than Ti-Cu(S) alloys due to the fine grain and Ti2Cu particles. With the consideration of the total compressive strain, it was suggested that the extrusion process could improve the ductility of Ti-Cu alloy(S) alloys. Electrochemical results have indicated that the extrusion process improved the corrosion resistance of Ti-Cu(S) alloys. Plate-count method displayed that both Ti-Cu(S) and Ti-Cu(E) exhibited strong antibacterial activity (>99%) against S. aureus. All these results demonstrated that hot forming processing, such as the extrusion in this study, refined the microstructure and densified the alloy, in turn improved the ductility and strength as well as anticorrosion properties without reduction in antibacterial properties. Copyright © 2016 Elsevier B.V. All rights reserved.

Cultural adaptation and validation of Stroke Impact Scale 3.0 version in Uganda: A small-scale study.

PubMed

Kamwesiga, Julius T; von Koch, Lena; Kottorp, Anders; Guidetti, Susanne

2016-01-01

Knowledge is scarce about the impact of stroke in Uganda, and culturally adapted, psychometrically tested patient-reported outcome measures are lacking. The Stroke Impact Scale 3.0 is recommended, but it has not been culturally adapted and validated in Uganda. To culturally adapt and determine the psychometric properties of the Stroke Impact Scale 3.0 in the Ugandan context on a small scale. The Stroke Impact Scale 3.0 was culturally adapted to form Stroke Impact Scale 3.0 Uganda ( in English ) by involving 25 participants in three different expert committees. Subsequently, Stroke Impact Scale 3.0 Uganda from English to Luganda language was done in accordance with guidelines. The first language in Uganda is English and Luganda is the main spoken language in Kampala city and its surroundings. Translation of Stroke Impact Scale 3.0 Uganda ( both in English and Luganda ) was then tested psychometrically by applying a Rasch model on data collected from 95 participants with stroke. Overall, 10 of 59 (17%) items in the eight domains of the Stroke Impact Scale 3.0 were culturally adapted. The majority were 6 of 10 items in the domain Activities of Daily Living, 2 of 9 items in the domain Mobility, and 2 of 5 items in the domain Hand function. Only in two domains, all items demonstrated acceptable goodness of fit to the Rasch model. There were also more than 5% person misfits in the domains Participation and Emotion, while the Communication, Mobility, and Hand function domains had the lowest proportions of person misfits. The reliability coefficient was equal or larger than 0.90 in all domains except the Emotion domain, which was below the set criterion of 0.80 (0.75). The cultural adaptation and translation of Stroke Impact Scale 3.0 Uganda provides initial evidence of validity of the Stroke Impact Scale 3.0 when used in this context. The results provide support for several aspects of validity and precision but also point out issues for further adaptation and improvement

United against cancer: prevention to end-of-life care—highlights from the Uganda Cancer Institute–Palliative Care Association of Uganda Joint International Conference on Cancer and Palliative Care and the 7th Palliative Care Conference, 24–25 August 2017, Kampala, Uganda

PubMed Central

Downing, Julia; Ddungu, Henry; Kiyange, Fatia; Batuli, Mwazi; Kafeero, James; Kebirungi, Harriet; Kiwanuka, Rose; Mugisha, Noleb; Mwebesa, Eddie; Mwesiga, Mark; Namukwaya, Elizabeth; Niyonzima, Nixon; Phipps, Warren; Orem, Jackson

2017-01-01

The Uganda Cancer Institute (UCI) and the Palliative Care Association of Uganda (PCAU) jointly hosted an international conference on cancer and palliative care in August 2017 in Kampala, Uganda. At the heart of the conference rested a common commitment to see patient care improved across Uganda and the region. The theme – United Against Cancer: Prevention to End-of-Life Care – reflected this joint vision and the drive to remember that cancer care should include prevention, early diagnosis and screening, treatment, rehabilitation and palliative care. The conference brought together 451 delegates from 17 countries. The key themes of the conference included: the importance of the World Health Assembly Resolutions on Palliative Care (2014) and cancer care (2017); the need to develop a National Cancer Control Programme; strategies for effective cancer diagnosis and treatment in low- and middle-income countries; advocacy, human rights and access to essential medicines, including access to opioids and nurse prescribing; paediatric care; leadership and commitment; collaboration; resources (financial and human), the recognition that palliative care is not limited to cancer care and the importance of learning from each other. The conference also gave the opportunity to celebrate the 50th Anniversary of the UCI, with a celebration dinner attended by the Minister of Health and the US Ambassador. Participants reported that the conference was a forum that updated them in all aspects of cancer and palliative care, which challenged their knowledge, and was enlightening in terms of current treatment options for individuals with cancer. The benefits of having a joint conference were recognised, allowing for further networking between cancer and palliative care organisations. This conference, highlighting many developments in cancer and palliative care, served as a unique opportunity to bring people together and unite them in developing cancer and palliative care. PMID:29290759

Effects of extrusion cooking on the chemical composition and functional properties of dry common bean powders.

PubMed

Ai, Yongfeng; Cichy, Karen A; Harte, Janice B; Kelly, James D; Ng, Perry K W

2016-11-15

The impact of extrusion cooking on the chemical composition and functional properties of bean powders from four common bean varieties was investigated. The raw bean powders were extruded under eight different conditions, and the extrudates were then dried and ground (particle size⩽0.5mm). Compared with corresponding non-extruded (raw) bean powders (particle size⩽0.5mm), the extrusion treatments did not substantially change the protein and starch contents of the bean powders and showed inconsistent effects on the sucrose, raffinose and stachyose contents. The extrusion cooking did cause complete starch gelatinization and protein denaturation of the bean powders and thus changed their pasting properties and solvent-retention capacities. The starch digestibilities of the cooked non-extruded and cooked extruded bean powders were comparable. The extruded bean powders displayed functional properties similar to those of two commercial bean powders. Copyright © 2016 Elsevier Ltd. All rights reserved.

Non-surgical management of paraesthesia and pain associated with endodontic sealer extrusion into the mandibular canal.

PubMed

Froes, Fabiana Gama Benevides; Miranda, Aguida Maria Menezes Aguiar; Abad, Ernani da Costa; Riche, Fernanda Nehme; Pires, Fábio Ramôa

2009-12-01

The aim of this report was to present a case of endodontic sealer extrusion into the mandibular canal in a 42-year-old woman. The patient was referred to the Endodontology and Stomatology Clinics, School of Dentistry, Estácio de Sá University, complaining of 5-day duration intense spontaneous pain and paraesthesia, both arising after an endodontic intervention. Conventional radiographs and computed tomography of the mandible showed the presence of radiopacities inside the right mandibular canal. History and these radiographs confirmed extrusion of endodontic sealer. Treatment included an anti-inflammatory drug, completion of endodontic treatment and follow up. The patient reported gradual improvement, becoming asymptomatic after 2 months. Radiographs 30 months after initial examination revealed partial resorption of the foreign material. In conclusion, iatrogenic extrusion of endodontic materials should be included in differential diagnosis of endodontic pain and can sometimes be managed through non-surgical interventions in some cases.

Examining the Effect of the Die Angle on Tool Load and Wear in the Extrusion Process

NASA Astrophysics Data System (ADS)

Nowotyńska, Irena; Kut, Stanisław

2014-04-01

The tool durability is a crucial factor in each manufacturing process, and this also includes the extrusion process. Striving to achieve the higher product quality should be accompanied by a long-term tool life and production cost reduction. This article presents the comparative research of load and wear of die at various angles of working cone during the concurrent extrusion. The numerical calculations of a tool load during the concurrent extrusion were performed using the MSC MARC software using the finite element method (FEM). Archard model was used to determine and compare die wear. This model was implemented in the software using the FEM. The examined tool deformations and stress distribution were determined based on the performed analyses. The die wear depth at various working cone angles was determined. Properly shaped die has an effect on the extruded material properties, but also controls loads, elastic deformation, and the tool life.

Waxy soft white wheat: extrusion characteristics and thermal and rheological properties

USDA-ARS?s Scientific Manuscript database

Waxy wheat flour was analyzed for its thermal and rheological properties and extruded to understand its processing characteristics. Comparisons were made with normal soft white wheat flour to identify extrusion differences under the same conditions. The thermal and rheological properties through Rap...

Downstream aggradation owing to lava dome extrusion and rainfall runoff at Volcán Santiaguito, Guatemala

USGS Publications Warehouse

Harris, Andrew J. L.; Vallance, James W.; Kimberly, Paul; Rose, William I.; Matías, Otoniel; Bunzendahl, Elly; Flynn, Luke P.; Garbeil, Harold

2006-01-01

Persistent lava extrusion at the Santiaguito dome complex (Guatemala) results in continuous lahar activity and river bed aggradation downstream of the volcano. We present a simple method that uses vegetation indices extracted from Landsat Thematic Mapper (TM) data to map impacted zones. Application of this technique to a time series of 21 TM images acquired between 1987 and 2000 allow us to map, measure, and track temporal and spatial variations in the area of lahar impact and river aggradation.In the proximal zone of the fluvial system, these data show a positive correlation between extrusion rate at Santiaguito (E), aggradation area 12 months later (Aprox), and rainfall during the intervening 12 months (Rain12): Aprox=3.92+0.50 E+0.31 ln(Rain12) (r2=0.79). This describes a situation in which an increase in sediment supply (extrusion rate) and/or a means to mobilize this sediment (rainfall) results in an increase in lahar activity (aggraded area). Across the medial zone, we find a positive correlation between extrusion rate and/or area of proximal aggradation and medial aggradation area (Amed): Amed=18.84-0.05 Aprox - 6.15 Rain12 (r2=0.85). Here the correlation between rainfall and aggradation area is negative. This describes a situation in which increased sediment supply results in an increase in lahar activity but, because it is the zone of transport, an increase in rainfall serves to increase the transport efficiency of rivers flowing through this zone. Thus, increased rainfall flushes the medial zone of sediment.These quantitative data allow us to empirically define the links between sediment supply and mobilization in this fluvial system and to derive predictive relationships that use rainfall and extrusion rates to estimate aggradation area 12 months hence.

Quantitative measures of meniscus extrusion predict incident radiographic knee osteoarthritis – data from the Osteoarthritis Initiative

PubMed Central

Emmanuel, K.; Quinn, E.; Niu, J.; Guermazi, A.; Roemer, F.; Wirth, W.; Eckstein, F.; Felson, D.

2017-01-01

SUMMARY Objective To test the hypothesis that quantitative measures of meniscus extrusion predict incident radiographic knee osteoarthritis (KOA), prior to the advent of radiographic disease. Methods 206 knees with incident radiographic KOA (Kellgren Lawrence Grade (KLG) 0 or 1 at baseline, developing KLG 2 or greater with a definite osteophyte and joint space narrowing (JSN) grade ≥1 by year 4) were matched to 232 control knees not developing incident KOA. Manual segmentation of the central five slices of the medial and lateral meniscus was performed on coronal 3T DESS MRI and quantitative meniscus position was determined. Cases and controls were compared using conditional logistic regression adjusting for age, sex, BMI, race and clinical site. Sensitivity analyses of early (year [Y] 1/2) and late (Y3/4) incidence was performed. Results Mean medial extrusion distance was significantly greater for incident compared to non-incident knees (1.56 mean ± 1.12 mm SD vs 1.29 ± 0.99 mm; +21%, P < 0.01), so was the percent extrusion area of the medial meniscus (25.8 ± 15.8% vs 22.0 ± 13.5%; +17%, P < 0.05). This finding was consistent for knees restricted to medial incidence. No significant differences were observed for the lateral meniscus in incident medial KOA, or for the tibial plateau coverage between incident and non-incident knees. Restricting the analysis to medial incident KOA at Y1/2 differences were attenuated, but reached significance for extrusion distance, whereas no significant differences were observed at incident KOA in Y3/4. Conclusion Greater medial meniscus extrusion predicts incident radiographic KOA. Early onset KOA showed greater differences for meniscus position between incident and non-incident knees than late onset KOA. PMID:26318658

Uganda Country Analysis Brief

EIA Publications

2016-01-01

Uganda does not produce hydrocarbons currently, but after discovering oil ten years ago, the country is expected to start producing oil within the next decade. Commercial oil production is expected to start at the earliest in 2020 but most likely beyond this period. The production start date has been pushed back several times in the past. Contractual and tax disputes, differences between the Ugandan government and international investors over the portion of oil production to be exported versus refined locally, and disagreements over the export pipeline route have all contributed to a later-than-expected production start date. Sustained low global oil prices have also contributed to delays.

Extrusion of xylans extracted from corn cobs into biodegradable polymeric materials.

PubMed

Bahcegul, Erinc; Akinalan, Busra; Toraman, Hilal E; Erdemir, Duygu; Ozkan, Necati; Bakir, Ufuk

2013-12-01

Solvent casting technique, which comprises multiple energy demanding steps including the dissolution of a polymer in a solvent followed by the evaporation of the solvent from the polymer solution, is currently the main technique for the production of xylan based polymeric materials. The present study shows that sufficient water content renders arabinoglucuronoxylan (AGX) polymers extrudable, enabling the production of AGX based polymeric materials in a single step via extrusion, which is economically advantageous to solvent casting process for mass production. AGX polymers with water content of 27% were found to yield extrudates at an extrusion temperature of 90°C. The extruded strips showed very good mechanical properties with an ultimate tensile strength of 76 ± 6 MPa and elongation at break value of 35 ± 8%, which were superior to the mechanical properties of the strips obtained from polylactic acid. Copyright © 2013 Elsevier Ltd. All rights reserved.

Learning Barriers among Grade 6 Pupils Attending Rural Schools in Uganda: Implications to Policy and Practice

ERIC Educational Resources Information Center

Hungi, Njora; Ngware, Moses; Mahuro, Gerald; Muhia, Nelson

2017-01-01

The paper uses multilevel analysis procedures to examine individual- and group-level learning barriers that have the greatest impact on pupil achievement in Uganda. The data for this study were collected in 2014 among 2711 Grade 6 pupils attending 82 schools in two rural districts of Iganga and Mayuge in Uganda. Data used in this paper are part of…

Building Rain Water Tanks and Building Skills: A Case Study of a Women's Organization in Uganda

ERIC Educational Resources Information Center

Payne, Deborah; Nakato, Margaret; Nabalango, Caroline

2008-01-01

Water collection in rural areas of Uganda is left primarily to women and children. Katosi Women Development Trust, an NGO based in rural Uganda has focused on addressing the gender-linked issue of increased water sources near the home through the construction of rain water collection tanks. In an effort to improve the income of members as well as…

A critique of the Uganda district league table using a normative health system performance assessment framework.

PubMed

KirungaTashobya, Christine; Ssengooba, Freddie; Nabyonga-Orem, Juliet; Bataringaya, Juliet; Macq, Jean; Marchal, Bruno; Musila, Timothy; Criel, Bart

2018-05-10

In 2003 the Uganda Ministry of Health (MoH) introduced the District League Table (DLT) to track district performance. This review of the DLT is intended to add to the evidence base on Health Systems Performance Assessment (HSPA) globally, with emphasis on Low and Middle Income Countries (LMICs), and provide recommendations for adjustments to the current Ugandan reality. A normative HSPA framework was used to inform the development of a Key Informant Interview (KII) tool. Thirty Key Informants were interviewed, purposively selected from the Ugandan health system on the basis of having developed or used the DLT. KII data and information from published and grey literature on the Uganda health system was analyzed using deductive analysis. Stakeholder involvement in the development of the DLT was limited, including MoH officials and development partners, and a few district technical managers. Uganda policy documents articulate a conceptually broad health system whereas the DLT focuses on a healthcare system. The complexity and dynamism of the Uganda health system was insufficiently acknowledged by the HSPA framework. Though DLT objectives and indicators were articulated, there was no conceptual reference model and lack of clarity on the constitutive dimensions. The DLT mechanisms for change were not explicit. The DLT compared markedly different districts and did not identify factors behind observed performance. Uganda lacks a designated institutional unit for the analysis and presentation of HSPA data, and there are challenges in data quality and range. The critique of the DLT using a normative model supported the development of recommendation for Uganda district HSPA and provides lessons for other LMICs. A similar approach can be used by researchers and policy makers elsewhere for the review and development of other frameworks. Adjustments in Uganda district HSPA should consider: wider stakeholder involvement with more district managers including political

3D FEM Geometry and Material Flow Optimization of Porthole-Die Extrusion

NASA Astrophysics Data System (ADS)

Ceretti, Elisabetta; Mazzoni, Luca; Giardini, Claudio

2007-05-01

The aim of this work is to design and to improve the geometry of a porthole-die for the production of aluminum components by means of 3D FEM simulations. In fact, the use of finite element models will allow to investigate the effects of the die geometry (webs, extrusion cavity) on the material flow and on the stresses acting on the die so to reduce the die wear and to improve the tool life. The software used to perform the simulations was a commercial FEM code, Deform 3D. The technological data introduced in the FE model have been furnished by METRA S.p.A. Company, partner in this research. The results obtained have been considered valid and helpful by the Company for building a new optimized extrusion porthole-die.

Dual-Extrusion 3D Printing of Anatomical Models for Education

ERIC Educational Resources Information Center

Smith, Michelle L.; Jones, James F. X.

2018-01-01

Two material 3D printing is becoming increasingly popular, inexpensive and accessible. In this paper, freely available printable files and dual extrusion fused deposition modelling were combined to create a number of functional anatomical models. To represent muscle and bone FilaFlex[superscript 3D] flexible filament and polylactic acid (PLA)…

Study to elucidate formation pathways of selected roast-smelling odorants upon extrusion cooking.

PubMed

Davidek, Tomas; Festring, Daniel; Dufossé, Thierry; Novotny, Ondrej; Blank, Imre

2013-10-30

The formation pathways of the N-containing roast-smelling compounds 2-acetyl-1-pyrroline, 2-acetyl-1(or 3),4,5,6-tetrahydropyridine, and their structural analogues 2-propionyl-1-pyrroline and 2-propionyl-1(or 3),4,5,6-tetrahydropyridine were studied upon extrusion cooking using the CAMOLA approach. The samples were produced under moderate extrusion conditions (135 °C, 20% moisture, 400 rpm) employing a rice-based model recipe enriched with flavor precursors ([U-(13)C6]-D-glucose, D-glucose, glycine, L-proline, and L-ornithine). The obtained data indicate that the formation of these compounds upon extrusion follows pathways similar to those reported for nonsheared model systems containing D-glucose and L-proline. 2-Acetyl-1-pyrroline is formed (i) by acylation of 1-pyrroline via C2 sugar fragments (major pathway) and (ii) via ring-opening of 1-pyrroline incorporating C3 sugar fragments (minor pathway), whereas 2-propionyl-1-pyrroline incorporates exclusively C3 sugar fragments. 2-Acetyl-1(or 3),4,5,6-tetrahydropyridine and the corresponding propionyl analogue incorporate C3 and C4 sugar fragments, respectively. In addition, it has been shown that the formation of 2-acetyl-1-pyrroline in low-moisture systems depends on the pH value of the reaction mixture.

Process Parameter Optimization of Extrusion-Based 3D Metal Printing Utilizing PW-LDPE-SA Binder System.

PubMed

Ren, Luquan; Zhou, Xueli; Song, Zhengyi; Zhao, Che; Liu, Qingping; Xue, Jingze; Li, Xiujuan

2017-03-16

Recently, with a broadening range of available materials and alteration of feeding processes, several extrusion-based 3D printing processes for metal materials have been developed. An emerging process is applicable for the fabrication of metal parts into electronics and composites. In this paper, some critical parameters of extrusion-based 3D printing processes were optimized by a series of experiments with a melting extrusion printer. The raw materials were copper powder and a thermoplastic organic binder system and the system included paraffin wax, low density polyethylene, and stearic acid (PW-LDPE-SA). The homogeneity and rheological behaviour of the raw materials, the strength of the green samples, and the hardness of the sintered samples were investigated. Moreover, the printing and sintering parameters were optimized with an orthogonal design method. The influence factors in regard to the ultimate tensile strength of the green samples can be described as follows: infill degree > raster angle > layer thickness. As for the sintering process, the major factor on hardness is sintering temperature, followed by holding time and heating rate. The highest hardness of the sintered samples was very close to the average hardness of commercially pure copper material. Generally, the extrusion-based printing process for producing metal materials is a promising strategy because it has some advantages over traditional approaches for cost, efficiency, and simplicity.

Process Parameter Optimization of Extrusion-Based 3D Metal Printing Utilizing PW–LDPE–SA Binder System

PubMed Central

Ren, Luquan; Zhou, Xueli; Song, Zhengyi; Zhao, Che; Liu, Qingping; Xue, Jingze; Li, Xiujuan

2017-01-01

Recently, with a broadening range of available materials and alteration of feeding processes, several extrusion-based 3D printing processes for metal materials have been developed. An emerging process is applicable for the fabrication of metal parts into electronics and composites. In this paper, some critical parameters of extrusion-based 3D printing processes were optimized by a series of experiments with a melting extrusion printer. The raw materials were copper powder and a thermoplastic organic binder system and the system included paraffin wax, low density polyethylene, and stearic acid (PW–LDPE–SA). The homogeneity and rheological behaviour of the raw materials, the strength of the green samples, and the hardness of the sintered samples were investigated. Moreover, the printing and sintering parameters were optimized with an orthogonal design method. The influence factors in regard to the ultimate tensile strength of the green samples can be described as follows: infill degree > raster angle > layer thickness. As for the sintering process, the major factor on hardness is sintering temperature, followed by holding time and heating rate. The highest hardness of the sintered samples was very close to the average hardness of commercially pure copper material. Generally, the extrusion-based printing process for producing metal materials is a promising strategy because it has some advantages over traditional approaches for cost, efficiency, and simplicity. PMID:28772665

A situational analysis of priority disaster hazards in Uganda: findings from a hazard and vulnerability analysis.

PubMed

Mayega, R W; Wafula, M R; Musenero, M; Omale, A; Kiguli, J; Orach, G C; Kabagambe, G; Bazeyo, W

2013-06-01

Most countries in sub-Saharan Africa have not conducted a disaster risk analysis. Hazards and vulnerability analyses provide vital information that can be used for development of risk reduction and disaster response plans. The purpose of this study was to rank disaster hazards for Uganda, as a basis for identifying the priority hazards to guide disaster management planning. The study as conducted in Uganda, as part of a multi-country assessment. A hazard, vulnerability and capacity analysis was conducted in a focus group discussion of 7 experts representing key stakeholder agencies in disaster management in Uganda. A simple ranking method was used to rank the probability of occurance of 11 top hazards, their potential impact and the level vulnerability of people and infrastructure. In-terms of likelihood of occurance and potential impact, the top ranked disaster hazards in Uganda are: 1) Epidemics of infectious diseases, 2) Drought/famine, 3) Conflict and environmental degradation in that order. In terms of vulnerability, the top priority hazards to which people and infrastructure were vulnerable were: 1) Conflicts, 2) Epidemics, 3) Drought/famine and, 4) Environmental degradation in that order. Poverty, gender, lack of information, and lack of resilience measures were some of the factors promoting vulnerability to disasters. As Uganda develops a disaster risk reduction and response plan, it ought to prioritize epidemics of infectious diseases, drought/famine, conflics and environmental degradation as the priority disaster hazards.

Empowerment, intimate partner violence and skilled birth attendance among women in rural Uganda.

PubMed

Kwagala, Betty; Nankinga, Olivia; Wandera, Stephen Ojiambo; Ndugga, Patricia; Kabagenyi, Allen

2016-05-04

There is limited research on how the empowerment of women and intimate partner violence (IPV) are associated with skilled birth attendance (SBA) among rural women in Uganda. Therefore, the aim of this paper was to investigate the association between women's empowerment, their experience of IPV and SBA in rural Uganda. Using data from the Uganda Demographic and Health Survey (UDHS), we selected 857 rural women who were in union, had given birth in the last 5 years preceding the survey and were selected for the domestic violence (DV) module. Frequency distributions were used to describe the background characteristics of the women and their partners. Pearson's chi-squared (χ (2)) tests were used to investigate the associations between SBA and women's empowerment; and partners' and women's socio-demographic factors including sexual violence. Multivariable logistic regression analyses were used to examine the association between SBA and explanatory variables. More than half (55 %) of the women delivered under the supervision of skilled birth attendant. Women's empowerment with respect to participation in household decision-making, property (land and house) (co)ownership, IPV, and sexual empowerment did not positively predict SBA among rural women in Uganda. Key predictors of SBA were household wealth status, partners' education, ANC attendance and parity. For enhancement of SBA in rural areas, there is a need to encourage a more comprehensive ANC attendance irrespective of number of children a woman has; and design interventions to enhance household wealth and promote men's education.

Action for child survival: elimination of Haemophilus influenzae type b meningitis in Uganda.

PubMed

Lewis, Rosamund F; Kisakye, Annet; Gessner, Bradford D; Duku, Chaplain; Odipio, John Bosco; Iriso, Robert; Nansera, Denis; Braka, Fiona; Makumbi, Issa; Kekitiinwa, Addy

2008-04-01

To guide immunization policy, we determined the public health benefit of introducing Haemophilus influenzae type b (Hib) vaccine in Uganda and estimated the vaccine effectiveness. Surveillance data for acute bacterial meningitis among children aged 0-59 months were reviewed from three hospital sentinel sites, for July 2001 to June 2007, to determine the incidence of Hib meningitis, the effectiveness of Hib vaccine with a case-control design, and the number of vaccine-preventable cases and deaths of Hib disease in Uganda. Of the 13 978 children from 17 districts with suspected bacterial meningitis, 269 had confirmed Hib meningitis, declining from 69 patients in the prevaccine year (2001-2002) to three in 2006-2007. Hib meningitis incidence dropped from 88 cases per 100,000 children aged < 5 years in the year before vaccine introduction to 13 within 4 years, and to near zero in the fifth year. Vaccine effectiveness for 2 or more doses was 93% (95% confidence interval, CI: 69-99) against confirmed Hib meningitis and 53% (95% CI: 11-68) against purulent meningitis of unknown cause. In Uganda, Hib vaccine prevents an estimated 28 000 cases of pneumonia and meningitis, 5000 deaths and 1000 severe meningitis sequelae each year. Infant immunization with Hib vaccine has virtually eliminated Hib meningitis in Uganda within 5 years. Ensuring long-term benefits of Hib vaccine urgently requires sustainable vaccine financing, high-quality ongoing surveillance, and a health sector able to deliver a robust immunization programme.

Empowerment, partner's behaviours and intimate partner physical violence among married women in Uganda.

PubMed

Kwagala, Betty; Wandera, Stephen Ojiambo; Ndugga, Patricia; Kabagenyi, Allen

2013-12-01

There is dearth of knowledge and research about the role of empowerment, partners' behaviours and intimate partner physical violence (IPPV) among married women in Uganda. This paper examined the influence of women's empowerment and partners' behaviours on IPPV among married women in Uganda. The 2011 Uganda Demographic and Health Survey data were used, selecting a weighted sample of 1,307 women in union considered for the domestic violence module. Cross tabulations (chi-square tests) and multivariate logistic regressions were used to identify factors associated with IPPV. The prevalence of IPPV among women in union in Uganda is still high (41%). Women's occupation was the only measure of empowerment that was significantly associated with IPPV, where women in professional employment were less likely to experience IPPV. Women from wealthy households were less likely to experience IPPV. IPPV was more likely to be reported by women who had ever had children and witnessed parental IPPV. IPPV was also more likely to be reported by women whose husbands or partners: accused them of unfaithfulness, did not permit them to meet female friends, insisted on knowing their whereabouts and sometimes or often got drunk. Women who were afraid their partners were also more likely to report IPPV. In the Ugandan context, women's empowerment as assessed by the UDHS has limited mitigating effect on IPPV in the face of partners' negative behaviours and history of witnessing parental violence.

Surgeons OverSeas Assessment of Surgical Need (SOSAS) Uganda: Update for Household Survey.

PubMed

Fuller, Anthony T; Butler, Elissa K; Tran, Tu M; Makumbi, Fredrick; Luboga, Samuel; Muhumza, Christine; Chipman, Jeffrey G; Groen, Reinou S; Gupta, Shailvi; Kushner, Adam L; Galukande, Moses; Haglund, Michael M

2015-12-01

The first step in improving surgical care delivery in low- and middle-income countries (LMICs) is quantifying surgical need. The Surgeons OverSeas Assessment of Surgical Need (SOSAS) is a validated household survey that has been previously implemented in three LMICs with great success. We implemented the SOSAS survey in Uganda, a medium-sized country with comparatively more language and ethnic group diversity. The investigators partnered with the Performance Monitoring and Accountability 2020 (PMA2020) Uganda to access a data collection platform sampling 2520 households in 105 randomly selected enumeration areas. Due to geographic size consideration and language diversity, SOSAS's methodology was updated in three significant dimensions (1) technology, (2) staff management, and (3) questionnaire adaptations. The SOSAS survey was successfully implemented with non-medically trained but field proven research assistants. We sampled 2315 of 2402 eligible households (response rate 96.4 %) and 4248 of 4374 eligible individual respondents (response rate 97.1 %). The female-to-male ratio was 51.1-48.9 %. Total survey cost was USD 73,145 and data collection occurred in 14 days. SOSAS Uganda has demonstrated that non-medically trained, but university-educated, experienced researchers supervised by academic surgeons can successfully perform accurate data collection of SOSAS. SOSAS can be successfully implemented within larger and more diverse LMICs using existing national survey platforms, and SOSAS Uganda provides insights on how SOSAS can be executed specifically within other PMA2020 program countries.

Earthquake induced variations in extrusion rate: A numerical modeling approach to the 2006 eruption of Merapi Volcano (Indonesia)

NASA Astrophysics Data System (ADS)

Carr, Brett B.; Clarke, Amanda B.; de'Michieli Vitturi, Mattia

2018-01-01

Extrusion rates during lava dome-building eruptions are variable and eruption sequences at these volcanoes generally have multiple phases. Merapi Volcano, Java, Indonesia, exemplifies this common style of activity. Merapi is one of Indonesia's most active volcanoes and during the 20th and early 21st centuries effusive activity has been characterized by long periods of very slow (<0.1 m3 s-1) extrusion rate interrupted every few years by short episodes of elevated extrusion rates (1-4 m3 s-1) lasting weeks to months. One such event occurred in May-July 2006, and previous research has identified multiple phases with different extrusion rates and styles of activity. Using input values established in the literature, we apply a 1D, isothermal, steady-state numerical model of magma ascent in a volcanic conduit to explain the variations and gain insight into corresponding conduit processes. The peak phase of the 2006 eruption occurred in the two weeks following the May 27 Mw 6.4 earthquake 50 km to the south. Previous work has suggested that the peak extrusion rates observed in early June were triggered by the earthquake through either dynamic stress-induced overpressure or the addition of CO2 due to decarbonation and gas escape from new fractures in the bedrock. We use the numerical model to test the feasibility of these proposed hypotheses and show that, in order to explain the observed change in extrusion rate, an increase of approximately 5-7 MPa in magma storage zone overpressure is required. We also find that the addition of ∼1000 ppm CO2 to some portion of the magma in the storage zone following the earthquake reduces water solubility such that gas exsolution is sufficient to generate the required overpressure. Thus, the proposed mechanism of CO2 addition is a viable explanation for the peak phase of the Merapi 2006 eruption. A time-series of extrusion rate shows a sudden increase three days following the earthquake. We explain this three-day delay by the

Crystallisation of mela-aillikites of the Narsaq region, Gardar alkaline province, south Greenland and relationships to other aillikitic carbonatitic associations in the province

NASA Astrophysics Data System (ADS)

Upton, B. G. J.; Craven, J. A.; Kirstein, L. A.

2006-11-01

Aillikites (carbonated, melilite-free ultramafic lamprophyres grading to carbonatites) are minor components of the Gardar alkaline igneous province. They occur principally as minor intrusions and as clasts in diatremes, but more voluminous aillikitic intrusions crop out near the Ilímaussaq Complex, which they predate by a few million years. These larger intrusions were emplaced at 1160 ± 5 Ma. They are essentially carbonate-free and, consisting almost wholly of ferromagnesian silicate and oxide minerals, are mela-aillikites. Typically the mela-aillikites are fine-grained rocks composed largely of olivine, clinopyroxene, phlogopite and magnetite that crystallised in open systems, permitting loss of volatile-rich residues. The petrography is highly complex, involving at least 28 mineral species. Pyroxenitic veins were emplaced while the host-rocks were still at high temperatures and represent channels through which fluorinated silico-carbonatitic residual melts escaped, with exsolving CO 2 as propellant. Precipitation of Ca-rich minerals including monticellite, perovskite, vesuvianite, wollastonite and cuspidine was a result of dissociation of the calcium carbonate in the residual melts. Late-stage crystallisation was in a highly oxidising environment in which the 'common minerals' attain extreme compositions (almost pure forsterite, ferrian-diopside, highly magnesian ilmenite, Ba-Ti-rich phlogopite and Sr-rich kaersutite). Spatially associated diatremes may be vents through which CO 2-rich gases erupted. The whole-rock compositions are considered to be well removed from those of co-existing melts: compaction and expulsion of highly mobile residual melts is inferred to have left the mela-aillikites as aberrant cumulates. The mela-aillikites are a late-Gardar manifestation of the aillikitic magmatism that occurred intermittently in the province for over 120 Ma. Repetitive formation of metasomite vein systems in the deep lithospheric mantle is postulated. These

Shear zone formation within the billet and metal flow through the die orifice in unlubricated axisymmetric forward and backward extrusion

NASA Astrophysics Data System (ADS)

Valberg, Henry; Costa, Andrè L. M.

2017-10-01

Metal flow inside the billet is known to be completely different in forward (FWE) and backward (BWE) Al-extrusion. A practical implication of this is that contamination near to the surface of the extrusion billet, or on the peripheral surface skin, tends to flow out of the die more readily in BWE than in FWE. It is therefore common in BWE to use a scalping operation on the billet to remove eventual sub-surface contamination that may be present. This additional working operation may be required in order to avoid surface quality problems on BWE profiles. In spite of the importance of metal flow in metals extrusion, there are still lack of knowledge about the topic. With recent progress in FEM-analysis for modelling deformation processing, however, it is now possible to perform accurate studies on metal flow phenomena by simulation on the computer. In our study, we are using the 3D FEM-program DEFORM® to model axisymmetric FWE and BWE in case of non-lubricated extrusion through a flat-faced die. Our primary focus is to consider the difference in appearance of shear zones present inside the extrusion billet for the two processes, including metal flow in the die mouth.

Patterns of Human Plague in Uganda, 2008–2016

PubMed Central

Forrester, Joseph D.; Apangu, Titus; Griffith, Kevin; Acayo, Sarah; Yockey, Brook; Kaggwa, John; Kugeler, Kiersten J.; Schriefer, Martin; Sexton, Christopher; Ben Beard, C.; Candini, Gordian; Abaru, Janet; Candia, Bosco; Okoth, Jimmy Felix; Apio, Harriet; Nolex, Lawrence; Ezama, Geoffrey; Okello, Robert; Atiku, Linda; Mpanga, Joseph

2017-01-01

Plague is a highly virulent fleaborne zoonosis that occurs throughout many parts of the world; most suspected human cases are reported from resource-poor settings in sub-Saharan Africa. During 2008–2016, a combination of active surveillance and laboratory testing in the plague-endemic West Nile region of Uganda yielded 255 suspected human plague cases; approximately one third were laboratory confirmed by bacterial culture or serology. Although the mortality rate was 7% among suspected cases, it was 26% among persons with laboratory-confirmed plague. Reports of an unusual number of dead rats in a patient’s village around the time of illness onset was significantly associated with laboratory confirmation of plague. This descriptive summary of human plague in Uganda highlights the episodic nature of the disease, as well as the potential that, even in endemic areas, illnesses of other etiologies might be being mistaken for plague. PMID:28820134

The development of poly(vinyl chloride) [PVC] extrusions for a 14,000-ton self-supporting structure for the detection of neutrinos

DOE PAGES

Grudzinski, James J.; Talaga, Richard L.; Pla-Dalmau, Anna; ...

2014-12-16

The NOvA Neutrino Experiment has built a one of a kind self-supporting plastic structure, potentially the largest ever built. The PVC structure serves as a neutrino detector and is composed of 28 individual blocks that measure 15.5 m (51 feet) high by 15.5 m (51 feet) wide by 2.1 m (7 feet) deep. The primary parts in the detector construction are 15.5m (51 foot), 15-cell PVC extrusions. These extrusions from the basis of the detector modules which are laminated together in a crossed pattern to form the individual blocks and then filled with mineral oil based liquid scintillator. The self-supportingmore » nature of the detector places important structural requirements on both the PVC formulation and the extrusions. Block assembly requirements impose narrow geometric tolerances. Due to the method of detecting neutrinos, the extrusions must possess exceptionally high reflectivity over a particular wavelength range. The requirement places additional restrictions on the components of the PVC formulation. Altogether, the PVC extrusions have to maintain important reflectivity characteristics, provide structural support to the detector, and meet relatively tight geometric requirements for assembly. In order to meet these constraints, a custom PVC formulation had to be created and extruded. Here, we describe the purpose and requirements of the NOvA detector leading to the production of our unique PVC extrusion, summarize the R&D process, and discuss the lessons learned.« less

Salmonella Inactivation During Extrusion of an Oat Flour Model Food.

PubMed

Anderson, Nathan M; Keller, Susanne E; Mishra, Niharika; Pickens, Shannon; Gradl, Dana; Hartter, Tim; Rokey, Galen; Dohl, Christopher; Plattner, Brian; Chirtel, Stuart; Grasso-Kelley, Elizabeth M

2017-03-01

Little research exists on Salmonella inactivation during extrusion processing, yet many outbreaks associated with low water activity foods since 2006 were linked to extruded foods. The aim of this research was to study Salmonella inactivation during extrusion of a model cereal product. Oat flour was inoculated with Salmonella enterica serovar Agona, an outbreak strain isolated from puffed cereals, and processed using a single-screw extruder at a feed rate of 75 kg/h and a screw speed of 500 rpm. Extrudate samples were collected from the barrel outlet in sterile bags and immediately cooled in an ice-water bath. Populations were determined using standard plate count methods or a modified most probable number when populations were low. Reductions in population were determined and analyzed using a general linear model. The regression model obtained for the response surface tested was Log (N R /N O ) = 20.50 + 0.82T - 141.16a w - 0.0039T 2 + 87.91a w 2 (R 2 = 0.69). The model showed significant (p < 0.05) linear and quadratic effects of a w and temperature and enabled an assessment of critical control parameters. Reductions of 0.67 ± 0.14 to 7.34 ± 0.02 log CFU/g were observed over ranges of a w (0.72 to 0.96) and temperature (65 to 100 °C) tested. Processing conditions above 82 °C and 0.89 a w achieved on average greater than a 5-log reduction of Salmonella. Results indicate that extrusion is an effective means for reducing Salmonella as most processes commonly employed to produce cereals and other low water activity foods exceed these parameters. Thus, contamination of an extruded food product would most likely occur postprocessing as a result of environmental contamination or through the addition of coatings and flavorings. © 2017 Institute of Food Technologists®.

A global social contract to reduce maternal mortality: the human rights arguments and the case of Uganda.

PubMed

Ooms, Gorik; Mulumba, Moses; Hammonds, Rachel; Latif Laila, Abdul; Waris, Attiya; Forman, Lisa

2013-11-01

Progress towards Millennium Development Goal 5a, reducing maternal deaths by 75% between 1990 and 2015, has been substantial; however, it has been too slow to hope for its achievement by 2015, particularly in sub-Saharan Africa, including Uganda. This suggests that both the Government of Uganda and the international community are failing to comply with their right-to-health-related obligations towards the people of Uganda. This country case study explores some of the key issues raised when assessing national and international right-to-health-related obligations. We argue that to comply with their shared obligations, national and international actors will have to take steps to move forward together. The Government of Uganda should not expect additional international assistance if it does not live up to its own obligations; at the same time, the international community must provide assistance that is more reliable in the long run to create the 'fiscal space' that the Government of Uganda needs to increase recurrent expenditure for health - which is crucial to addressing maternal mortality. We propose that the 'Roadmap on Shared Responsibility and Global Solidarity for AIDS, TB and Malaria Response in Africa', adopted by the African Union in July 2012, should be seen as an invitation to the international community to conclude a global social contract for health. Copyright © 2013 Reproductive Health Matters. Published by Elsevier Ltd. All rights reserved.

Synthetic-rubber extrusions form low cost roll-on solar collector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smay, V.E.

1979-06-01

Synthetic rubber extrusions composed of ethylene propylene diene monomer (EPDM) have been developed in 4.4-inch-wide mats as solar absorbers that are light weight and simple to install. The mats, which come in rolls up to 600 ft long, have 6 small tubes alternating with thin webbing. EPDM has a lifespan of 30-50 yrs and maintains its flexibility within a temperature range of -80 to 375/sup 0/F. The mats are laid over rigid insulation and covered with glazing, detailed assembly instructions are provided. EPDM is not subject to corrosion and is not damaged by freezing water, a second EPDM extrusion ismore » used for glazed solar collectors. The efficiency of the design is attributed to the greater surface-to-mass ratio, permitting more heat collection, and the smaller mass of the synthetic rubber, which allows faster heat-up. The total cost for a complete, installed solar heating system of this type, including pumps, tanks, and plumbing, is about $12/ft/sup 2/.« less

Cryptococcal disease and the burden of other fungal diseases in Uganda; Where are the knowledge gaps and how can we fill them?

PubMed

Parkes-Ratanshi, R; Achan, B; Kwizera, R; Kambugu, A; Meya, D; Denning, D W

2015-10-01

The HIV epidemic in Uganda has highlighted Cryptococcus and Candida infections as important opportunistic fungal infections. However, the burden of other fungal diseases is not well described. We aimed to estimate the burden of fungal infections in Uganda. All epidemiological papers of fungal diseases in Uganda were reviewed. Where there is no Ugandan data, global or East African data were used. Recurrent vaginal candidiasis is estimated to occur in 375 540 Uganda women per year; Candida in pregnant women affects up to 651,600 women per year. There are around 45,000 HIV-related oral and oesophageal candidosis cases per year. There are up to 3000 cases per year of post-TB chronic pulmonary aspergillosis. There are an estimated 40,392 people with asthma-related fungal conditions. An estimated 1,300,000 cases of tinea capitis occur in school children yearly in Uganda. There are approximately 800 HIV-positive adults with Pneumocystis jirovecii pneumonia (PJP) annually and up to 42 000 children with PJP per year. There are an estimated 4000 cryptococcal cases annually. There are an estimated 2.5 million fungal infections per year in Uganda. Cryptococcus and PJP cause around 28,000 deaths in adults and children per year. We propose replicating the model of research around cryptococcal disease to investigate and development management strategies for other fungal diseases in Uganda. © 2015 Blackwell Verlag GmbH.

Apical extrusion of Enterococcus faecalis using three different rotary instrumentation techniques: an in vitro study.

PubMed

Taneja, Sonali; Kumari, Manju; Barua, Madhumita; Dudeja, Chetna; Malik, Meeta

2015-01-01

To compare the apical extrusion of Enterococcus faecalis after instrumentation with three different Ni-Ti rotary instruments- An in vitro study. In vitro study Methods and Material: Forty freshly extracted mandibular premolars were mounted in bacteria collection apparatus and root canals were contaminated with a suspension of Enterococcus faecalis. The contaminated teeth were divided into 4 groups of 10 teeth each according to rotary system used for instrumentation: Group1: Hyflex files, Group 2: GTX files, Group 3: Protaper files and Group 4: control group (no instrumentation). Bacteria extruded after preparations were collected into vials and microbiological samples were incubated in BHI broth for 24 hrs. The colony forming units were determined for each sample. Statistical analysis was done using one way ANOVA followed by post hoc independent " t" test. GTX files extruded least amount of bacteria followed by Hyflex files. Maximum extrusion of E. faecalis was seen in rotary Protaper group. Least amount of extrusion was seen with GTX files followed by Hyflex files and then rotary Protaper system.

Application of Twin Screw Extrusion in the Manufacture of Cocrystals, Part I: Four Case Studies

PubMed Central

Daurio, Dominick; Medina, Cesar; Saw, Robert; Nagapudi, Karthik; Alvarez-Núñez, Fernando

2011-01-01

The application of twin screw extrusion (TSE) as a scalable and green process for the manufacture of cocrystals was investigated. Four model cocrystal forming systems, Caffeine-Oxalic acid, Nicotinamide-trans cinnamic acid, Carbamazepine-Saccharin, and Theophylline-Citric acid, were selected for the study. The parameters of the extrusion process that influenced cocrystal formation were examined. TSE was found to be an effective method to make cocrystals for all four systems studied. It was demonstrated that temperature and extent of mixing in the extruder were the primary process parameters that influenced extent of conversion to the cocrystal in neat TSE experiments. In addition to neat extrusion, liquid-assisted TSE was also demonstrated for the first time as a viable process for making cocrystals. Notably, the use of catalytic amount of benign solvents led to a lowering of processing temperatures required to form the cocrystal in the extruder. TSE should be considered as an efficient, scalable, and environmentally friendly process for the manufacture of cocrystals with little to no solvent requirements. PMID:24310598

Lateral Compression Properties of Magnesium Alloy Tubes Fabricated via Hydrostatic Extrusion Integrated with Circular ECAP

NASA Astrophysics Data System (ADS)

Lv, Jiuming; Hu, Fangyi; Cao, Quoc Dinh; Yuan, Renshu; Wu, Zhilin; Cai, Hongming; Zhao, Lei; Zhang, Xinping

2017-03-01

Hydrostatic extrusion integrated with circular equal channel angular pressing has been previously proposed for fabricating AZ80 magnesium alloy tubes as a method to obtain high-strength tubes for industrial applications. In order to axial tensile strength, circumferential mechanical properties are also important for tubular structures. The tensile properties of AZ80 tubes have been previously studied; however, the circumferential properties have not been examined. In this work, circumferential mechanical properties of these tubes were studied using lateral compression tests. An analytical model is proposed to evaluate the circumferential elongation, which is in good agreement with finite element results. The effects of the extrusion ratio and conical mandrel angle on the circumferential elongation and lateral compression strength are discussed. The strain distribution in the sample during lateral compression testing was found to be inhomogeneous, and cracks initially appeared on the inner surface of the sample vertex. The circumferential elongation and lateral compression strength increased with the extrusion ratio and conical mandrel angle. The anisotropy of the tube's mechanical properties was insignificant when geometric effects were ignored.

Extrusion of barley and oat influence the fecal microbiota and SCFA profile of growing pigs.

PubMed

Moen, Birgitte; Berget, Ingunn; Rud, Ida; Hole, Anastasia S; Kjos, Nils Petter; Sahlstrøm, Stefan

2016-02-01

The effect of extrusion of barley and oat on the fecal microbiota and the formation of SCFA was evaluated using growing pigs as model system. The pigs were fed a diet containing either whole grain barley (BU), oat groat (OU), or their respective extruded samples (BE and OE). 454 pyrosequencing showed that the fecal microbiota of growing pigs was affected by both extrusion and grain type. Extruded grain resulted in lower bacterial diversity and enrichment in operational taxonomic units (OTUs) affiliated with members of the Streptococcus, Blautia and Bulleidia genera, while untreated grain showed enrichment in OTUs affiliated with members of the Bifidobacterium and Lactobacillus genera, and the butyrate-producing bacteria Butyricicoccus, Roseburia, Coprococcus and Pseudobutyrivibrio. Untreated grain resulted in a significant increase of n-butyric, i-valeric and n-valeric acid, which correlated with an increase of Bifidobacterium and Lactobacillus. This is the first study showing that cereal extrusion affects the microbiota composition and diversity towards a state generally thought to be less beneficial for health, as well as less amounts of beneficial butyric acid.

Regulation of H+ Extrusion and Cytoplasmic pH in Maize Root Tips Acclimated to a Low-Oxygen Environment.

PubMed

Xia, J. H.; Roberts, JKM.

1996-05-01

We tested the hypothesis that H+ extrusion contributes to cytoplasmic pH regulation and tolerance of anoxia in maize (Zea mays) root tips. We studied root tips of whole seedlings that were acclimated to a low-oxygen environment by pretreatment in 3% (v/v) O2. Acclimated root tips characteristically regulate cytoplasmic pH near neutrality and survive prolonged anoxia, whereas nonacclimated tips undergo severe cytoplasmic acidosis and die much more quickly. We show that the plasma membrane H+-ATPase can operate under anoxia and that net H+ extrusion increases when cytoplasmic pH falls. However, at an external pH near 6.0, H+ extrusion contributes little to cytoplasmic pH regulation. At more acidic external pH values, net H+ flux into root tips increases dramatically, leading to a decrease in cytoplasmic pH and reduced tolerance of anoxia. We present evidence that, under these conditions, H+ pumps are activated to partly offset acidosis due to H+ influx and, thereby, contribute to cytoplasmic pH regulation and tolerance of anoxia. The regulation of H+ extrusion under anoxia is discussed with respect to the acclimation response and mechanisms of intracellular pH regulation in aerobic plant cells.

Malaria in Uganda: challenges to control on the long road to elimination. I. Epidemiology and current control efforts

PubMed Central

Yeka, Adoke; Gasasira, Anne; Mpimbaza, Arthur; Achan, Jane; Nankabirwa, Joaniter; Nsobya, Sam; Staedke, Sarah G.; Donnelly, Martin J.; Wabwire-Mangen, Fred; Talisuna, Ambrose; Dorsey, Grant; Kamya, Moses R.; Rosenthal, Philip J.

2011-01-01

Malaria remains one of the leading health problems of the developing world, and Uganda bears a particularly large burden from the disease. Our understanding is limited by a lack of reliable data, but it is clear that the prevalence of malaria infection, incidence of disease, and mortality from severe malaria all remain very high. Uganda has made progress in implementing key malaria control measures, in particular distribution of insecticide impregnated bednets, indoor residual spraying of insecticides, utilization of artemisinin-based combination therapy to treat uncomplicated malaria, and provision of intermittent preventive therapy for pregnant women. However, despite enthusiasm regarding the potential for the elimination of malaria in other areas, there is no convincing evidence that the burden of malaria has decreased in Uganda in recent years. Major challenges to malaria control in Uganda include very high malaria transmission intensity, inadequate health care resources, a weak health system, inadequate understanding of malaria epidemiology and the impact of control interventions, increasing resistance of parasites to drugs and of mosquitoes to insecticides, inappropriate case management, inadequate utilization of drugs to prevent malaria, and inadequate epidemic preparedness and response. Despite these challenges, prospects for the control of malaria have improved, and with attention to underlying challenges, progress toward the control of malaria in Uganda can be expected. PMID:21420377

Sexual behavior of female sex workers and access to condoms in Kenya and Uganda on the Trans-Africa highway.

PubMed

Morris, Chester N; Morris, Sheldon R; Ferguson, Alan G

2009-10-01

Female sex workers and their clients remain a high risk core group for HIV in Africa. We measured sexual behavior of a snowball sample of female sex workers (FSW) along the Trans Africa highway from Mombasa, Kenya to Kampala, Uganda and surveyed the availability of male condoms at 1,007 bars and lodgings in Kenya along the highway trucking stops where transactional sex occurs. There were 578 FSW one month sex diaries analyzed, 403 from Kenya and 175 from Uganda. Kenyan FSW had a median of 45 sexual acts per 28 days compared to 39 sex acts per 28 days by Ugandan FSW (P < 0.05). Condom use by FSW for all sexual liaisons was 79% in Kenya compared to 74% in Uganda. In multivariate analysis, adjusting for repeated measures, Kenyan FSW were more likely to use a condom by an adjusted odds ratio of 2.54 (95% confidence interval 1.89-3.41) compared to Ugandan FSW. Condom use with regular clients was 50.8% in Uganda compared with 68.7% in Kenya (P < 0.01). The number of sex workers reporting 100% condom use was 26.8% in Kenya and 18.9% in Uganda (P < 0.01). Bars and lodges in Kenya compared to Uganda were more likely to: have condom dispensers, 25% versus 1%, respectively (P < 0.01); distribute or sell condoms, 73.9% versus 47.6% (P < 0.01); and have more weekly condom distribution, 4.92 versus 1.27 condoms per seating capacity (P < 0.01). Our data indicate that in both countries condom use for FSW is suboptimal, particularly with regular partners, and greater condom use by Trans African highway FSW in Kenya compared to Uganda may be related to availability. Targeted interventions are warranted for FSW and truck drivers to prevent transmission in this important core group.

Geochemical distinctions between igneous carbonate, calcite cements, and limestone xenoliths (Polino carbonatite, Italy): spatially resolved LAICPMS analyses

NASA Astrophysics Data System (ADS)

Rosatelli, G.; Wall, F.; Stoppa, F.; Brilli, M.

2010-11-01

Petrography-controlled laser ablation inductively coupled plasma mass spectrometry (LAICPMS) analyses of carbonate in fresh shallow level sub-volcanic Polino monticellite calcio-carbonatite tuffisite have been performed to assess the geochemical differences between fresh igneous, epigenetic carbonates and sedimentary accidental fragments. Igneous calcite has consistently high LREE/HREE ratios (La/Yb N , 15-130) due to high LREE (ΣLREE, 425-1,269 ppm). Secondary calcite cements are characterized by progressively lower and more variable trace element contents, with lower LREE/HREE ratios. A distinguishing geochemical feature is progressively increasing negative Ce anomalies observed through coarse secondary calcite that can be related to the surface environment processes. The limestone accidental fragments in the tuffisite have trace element contents almost two orders of magnitude lower than igneous carbonate and low LREE (ΣLREE < 9.5 ppm) with low LREE/HREE fractionation (La/Yb N ratios < 18). The stable isotope composition of different carbonate types is consistent with their formation in different environments. The tuffisitization processes during diatreme formation under high CO2-OH fugacity conditions may account for the differences noted in the igneous carbonates.

Annual cost of antiretroviral therapy among three service delivery models in Uganda

PubMed Central

Vu, Lung; Waliggo, Samuel; Zieman, Brady; Jani, Nrupa; Buzaalirwa, Lydia; Okoboi, Stephen; Okal, Jerry; Borse, Nagesh N; Kalibala, Samuel

2016-01-01

Introduction In response to the increasing burden of HIV, the Ugandan government has employed different service delivery models since 2004 that aim to reduce costs and remove barriers to accessing HIV care. These models include community-based approaches to delivering antiretroviral therapy (ART) and delegating tasks to lower-level health workers. This study aimed to provide data on annual ART cost per client among three different service delivery models in Uganda. Methods Costing data for the entire year 2012 were retrospectively collected as part of a larger task-shifting study conducted in three organizations in Uganda: Kitovu Mobile (KM), the AIDS Support Organisation (TASO) and Uganda Cares (UC). A standard cost data capture tool was developed and used to retrospectively collect cost information regarding antiretroviral (ARV) drugs and non-ARV drugs, ART-related lab tests, personnel and administrative costs. A random sample of four TASO centres (out of 11), four UC clinics (out of 29) and all KM outreach units were selected for the study. Results Cost varied across sites within each organization as well as across the three organizations. In addition, the number of annual ART visits was more frequent in rural areas and through KM (the community distribution model), which played a major part in the overall annual ART cost. The annual cost per client (in USD) was $404 for KM, $332 for TASO and $257 for UC. These estimates were lower than previous analyses in Uganda or the region compared to data from 2001 to 2009, but comparable with recent estimates using data from 2010 to 2013. ARVs accounted for the majority of the total cost, followed by personnel and operational costs. Conclusions The study provides updated data on annual cost per ART visit for three service delivery models in Uganda. These data will be vital for in-country budgetary efforts to ensure that universal access to ART, as called for in the 2015 World Health Organization (WHO) guidelines, is

Extrusion of the medial meniscus in knee osteoarthritis assessed with a rotating clino-orthostatic permanent-magnet MRI scanner.

PubMed

Paparo, Francesco; Revelli, Matteo; Piccazzo, Riccardo; Astengo, Davide; Camellino, Dario; Puntoni, Matteo; Muda, Alessandro; Rollandi, Gian Andrea; Garlaschi, Giacomo; Cimmino, Marco Amedeo

2015-04-01

The objectives of this study were to assess the influence of weight-bearing on tibiofemoral osteoarthritis, including medial meniscal extrusion, by using a low-field (0.25 T) rotating clino-orthostatic permanent-magnet magnetic resonance (MR) scanner, and to analyse correlations of medial meniscal extrusion with the patient's Kellgren-Lawrence score, body mass index, and all the osteoarthritis features of the WORMS scoring system. Twenty-six patients (69.2% women and 30.8% men; mean age 67 ± 9.7 years) with medial tibiofemoral knee osteoarthritis were prospectively enrolled and MR sequences were acquired in both clino- and orthostatic position. MR images were assessed by two independent radiologists, according to the WORMS scale. Medial meniscal extrusion was measured and its clino-orthostatic difference (∆MME) was calculated. Intra- and inter-observer agreement of the WORMS Global Score readings was high by Cohen's K test (>0.81). No significant clino-orthostatic changes in the scoring parameters of the medial tibiofemoral joint were shown by Wilcoxon's test. Medial meniscal extrusion measured on orthostatic images was significantly higher than that measured in clinostatic position (p < 0.0001). At univariate analysis, the Kellgren-Lawrence score, WORMS Global Score, cartilage loss, meniscal damage, and osteophytes were significantly correlated to ∆MME (p < 0.005). Using a multiple regression model, tibiofemoral cartilage loss was found to correlate independently with ∆MME (p = 0.0499). Medial meniscal extrusion, evaluated with an open-configuration, rotating MR scanner, increased from the clinostatic to the orthostatic position. ∆MME, a new meniscal parameter, correlated with several important features of medial tibiofemoral osteoarthritis.

Family caregivers in rural Uganda: the hidden reality.

PubMed

Kipp, Walter; Tindyebwa, Denis; Rubaale, Tom; Karamagi, Ednah; Bajenja, Ellen

2007-01-01

We conducted 16 in-depth interviews with family caregivers of AIDS patients in three rural districts in western Uganda. They were selected from a client visitation list of the home-based care program for AIDS patients, based on volunteer participation. Family caregivers reported huge problems associated with providing the necessary psychological, social, and economic care. They also said that the physical and emotional demands of caregiving are overwhelming daily challenges. Most support to AIDS patients provided by family, friends, and the churches. The study highlights the great burden of caregivers, in sub-Saharan Africa who most often are elderly women and young girls. This study examine, the burden and related health issues of family caregivers, primarily women, for AIDS patients in Uganda. It was part of a broad research project using qualitative methods on family caregiving in the home environment in sub-Saharan Africa. As the requirements for family care giving are often overwhelming for women under the conditions as they exist in Uganda and in other developing countries, it constitutes a gender issue of great importance that has not been appreciated fully in the international literature. Family caregiving is also of international relevance, as HIV/AIDS is a global pandemic of previously unknown proportions. In many poor countries, family caregiving is the most common and often the only care that AIDS patients receive, because clinic-based care often is not available close to home or is not affordable. Therefore, family caregiver support programs to alleviate this burden are essential for all those countries where HIV/AIDS is prevalent. Family caregiver burden encompasses medical, social, and economic issues at the household level, which requires an interdisciplinary approach in order to fully understand and appreciate the different dimensions of the family caregiver burden and its negative impact on the lives of so many women in so many countries.

Tribological investigations of the applicability of surface functionalization for dry extrusion processes

NASA Astrophysics Data System (ADS)

Teller, Marco; Prünte, Stephan; Ross, Ingo; Temmler, André; Schneider, Jochen M.; Hirt, Gerhard

2017-10-01

Cold extrusion processes are characterized by large relative contact stresses combined with a severe surface enlargement of the workpiece. Under these process conditions a high risk for galling of workpiece material to the tool steel occurs especially in processing of aluminum and aluminum alloys. In order to reduce adhesive wear lubricants for separation of workpiece and tool surfaces are used. As a consequence additional process steps (e.g. preparation and cleaning of workpieces) are necessary. Thus, the realization of a dry forming process is aspired from an environmental and economic perspective. In this paper a surface functionalization with self-assembled-monolayers (SAM) of the tool steels AISI D2 (DIN 1.2379) and AISI H11 (DIN 1.2343) is evaluated by a process-oriented tribological test. The tribological experiment is able to resemble and scale the process conditions of cold extrusion related to relative contact stress and surface enlargement for the forming of pure aluminum (Al99.5). The effect of reduced relative contact stress, surface enlargement and relative velocity on adhesive wear and tool lifetime is evaluated. Similar process conditions are achievable by different die designs with decreased extrusion ratios and adjusted die angles. The effect of surface functionalization critically depends on the substrate material. The different microstructure and the resulting differences in surface chemistry of the two tested tool steels appear to affect the performance of the tool surface functionalization with SAM.

One-step continuous extrusion process for the manufacturing of solid dispersions.

PubMed

Maniruzzaman, M; Nair, A; Scoutaris, N; Bradley, Michael S A; Snowden, M J; Douroumis, D

2015-12-30

The purpose of this study was to evaluate the performance of synthetic magnesium aluminometasilicate (MAS) as a novel inorganic carrier in hot melt extrusion (HME) processing of indomethacin (IND) for the development of solid dispersions. A continuous extrusion process at various IND/excipient blend ratios (20%, 30% and 40%) was performed using a twin-screw extruder. Physicochemical characterization carried out by SEM, DSC, and XRPD demonstrated the presence of IND in amorphous nature within the porous network of the inorganic material for all extruded formulations. Further, AFM and FTIR studies revealed a single-phase amorphous system and intermolecular H-bonding formation. The IND/MAS extrudates showed enhanced INM dissolution rates within 100% been released within 1h. Stability studies under accelerated conditions (40°C, RH 75%) showed that MAS retained the physical stability of the amorphous solid dispersions even at high drug loadings for 12 months. Copyright © 2015 Elsevier B.V. All rights reserved.

Reemerging Sudan Ebola Virus Disease in Uganda, 2011

PubMed Central

Shoemaker, Trevor; Balinandi, Stephen; Campbell, Shelley; Wamala, Joseph Francis; McMullan, Laura K.; Downing, Robert; Lutwama, Julius; Mbidde, Edward; Ströher, Ute; Rollin, Pierre E.; Nichol, Stuart T.

2012-01-01

Two large outbreaks of Ebola hemorrhagic fever occurred in Uganda in 2000 and 2007. In May 2011, we identified a single case of Sudan Ebola virus disease in Luwero District. The establishment of a permanent in-country laboratory and cooperation between international public health entities facilitated rapid outbreak response and control activities. PMID:22931687

Higher Education Research in Uganda: Problems and Prospects

ERIC Educational Resources Information Center

Owoeye, J. S.; Oyebade, S. A.

2010-01-01

Research is regarded as essential for development and the application of new knowledge for the benefit of society. Higher education in Uganda has expanded rapidly in the last 20 years. Universities have become the most important institutions in the achievement of national and international goals in enhancing the quality of life, wealth creation,…

Study of Microstructure and Mechanical Properties Effects on Workpiece Quality in Sheet Metal Extrusion Process

PubMed Central

Suriyapha, Chatkaew; Bubphachot, Bopit; Rittidech, Sampan

2015-01-01

Sheet metal extrusion is a metal forming process in which the movement of a punch penetrates a sheet metal surface and it flows through a die orifice; the extruded parts can be deflected to have an extrusion cavity and protrusion on the opposite side. Therefore, this process results in a narrow region of highly localized plastic deformation due to the formation and microstructure effect on the work piece. This research investigated the characteristics of the material-flow behavior during the formation and its effect on the microstructure of the extruded sheet metal using the finite element method (FEM). The actual parts and FEM simulation model were developed using a blank material made from AISI-1045 steel with a thickness of 5 mm; the material's behavior was determined subject to the punch penetration depths of 20%, 40%, 60%, and 80% of the sheet thickness. The results indicated the formation and microstructure effects on the sheet metal extrusion parts and defects. Namely, when increasing penetration, narrowing the die orifice the material flows through, the material was formed by extruding, and defects were visibility, and the microstructure of the material's grains' size was flat and very fine. Extrusion defects were not found in the control material flow. The region of highly localized plastic deformation affected the material gain and mechanical properties. The FEM simulation results agreed with the experimental results. Moreover, FEM could be investigated as a tool to decrease the cost and time in trial and error procedures. PMID:26229979

Ecological Niche Modeling for Filoviruses: A Risk Map for Ebola and Marburg Virus Disease Outbreaks in Uganda.

PubMed

Nyakarahuka, Luke; Ayebare, Samuel; Mosomtai, Gladys; Kankya, Clovice; Lutwama, Julius; Mwiine, Frank Norbert; Skjerve, Eystein

2017-09-05

Uganda has reported eight outbreaks caused by filoviruses between 2000 to 2016, more than any other country in the world. We used species distribution modeling to predict where filovirus outbreaks are likely to occur in Uganda to help in epidemic preparedness and surveillance. The MaxEnt software, a machine learning modeling approach that uses presence-only data was used to establish filovirus - environmental relationships. Presence-only data for filovirus outbreaks were collected from the field and online sources. Environmental covariates from Africlim that have been downscaled to a nominal resolution of 1km x 1km were used. The final model gave the relative probability of the presence of filoviruses in the study area obtained from an average of 100 bootstrap runs. Model evaluation was carried out using Receiver Operating Characteristic (ROC) plots. Maps were created using ArcGIS 10.3 mapping software. We showed that bats as potential reservoirs of filoviruses are distributed all over Uganda. Potential outbreak areas for Ebola and Marburg virus disease were predicted in West, Southwest and Central parts of Uganda, which corresponds to bat distribution and previous filovirus outbreaks areas. Additionally, the models predicted the Eastern Uganda region and other areas that have not reported outbreaks before to be potential outbreak hotspots. Rainfall variables were the most important in influencing model prediction compared to temperature variables. Despite the limitations in the prediction model due to lack of adequate sample records for outbreaks, especially for the Marburg cases, the models provided risk maps to the Uganda surveillance system on filovirus outbreaks. The risk maps will aid in identifying areas to focus the filovirus surveillance for early detection and responses hence curtailing a pandemic. The results from this study also confirm previous findings that suggest that filoviruses are mainly limited by the amount of rainfall received in an area.

Ecological Niche Modeling for Filoviruses: A Risk Map for Ebola and Marburg Virus Disease Outbreaks in Uganda

PubMed Central

Nyakarahuka, Luke; Ayebare, Samuel; Mosomtai, Gladys; Kankya, Clovice; Lutwama, Julius; Mwiine, Frank Norbert; Skjerve, Eystein

2017-01-01

Introduction: Uganda has reported eight outbreaks caused by filoviruses between 2000 to 2016, more than any other country in the world. We used species distribution modeling to predict where filovirus outbreaks are likely to occur in Uganda to help in epidemic preparedness and surveillance. Methods: The MaxEnt software, a machine learning modeling approach that uses presence-only data was used to establish filovirus – environmental relationships. Presence-only data for filovirus outbreaks were collected from the field and online sources. Environmental covariates from Africlim that have been downscaled to a nominal resolution of 1km x 1km were used. The final model gave the relative probability of the presence of filoviruses in the study area obtained from an average of 100 bootstrap runs. Model evaluation was carried out using Receiver Operating Characteristic (ROC) plots. Maps were created using ArcGIS 10.3 mapping software. Results: We showed that bats as potential reservoirs of filoviruses are distributed all over Uganda. Potential outbreak areas for Ebola and Marburg virus disease were predicted in West, Southwest and Central parts of Uganda, which corresponds to bat distribution and previous filovirus outbreaks areas. Additionally, the models predicted the Eastern Uganda region and other areas that have not reported outbreaks before to be potential outbreak hotspots. Rainfall variables were the most important in influencing model prediction compared to temperature variables. Conclusions: Despite the limitations in the prediction model due to lack of adequate sample records for outbreaks, especially for the Marburg cases, the models provided risk maps to the Uganda surveillance system on filovirus outbreaks. The risk maps will aid in identifying areas to focus the filovirus surveillance for early detection and responses hence curtailing a pandemic. The results from this study also confirm previous findings that suggest that filoviruses are mainly limited by

[Technique for removing donor sclera by eyeball extrusion].

PubMed

González Del Valle, F; Álvarez Portela, M; Lara Medina, J; Celis Sánchez, J; Barrajón Rodríguez, A

2012-09-01

To describe a surgery technique for removing donor sclera tissue after corneo-scleral button excision. The extrusion technique is easy to perform. It allows the complete scleral extraction its total clean up to be performed, as well as making easier to isolate the retina and uveal tissue. This technique could have an important role in the anatomical and morphological study of ocular structures. Copyright © 2011 Sociedad Española de Oftalmología. Published by Elsevier Espana. All rights reserved.

New type of brittle deformations: two-axial turn structure of fractures in the Kovdor carbonatite intrusion (NW Russia)

NASA Astrophysics Data System (ADS)

Zhirov, Dmitry

2017-04-01

The Earth's crust is known for a few types of structural fissuring and faults organization. First of all, this is an orthogonal or some kind of non-orthogonal fissuring network with a various number of systems. The hierarchic model is also popular since it stipulates a regular arrangement and collateral subordination of several ranks of elements relative to each other, and a general fault and/or shear zone. An axis-symmetric fissuring structure is developed in the central (ring)-type massifs and some other geological bodies. It is formed due to the progressive turn of adjoining fissure planes around the massif symmetry axis (mostly vertical) at a discrete angle (within 5-15° on the average depending on the scale and internal structural features). The investigation of the fault tectonics in the Kovdor carbonatite intrusion (NW Russia) has resulted in the identification of a new brittle deformations type. It is formed due to the simultaneous turn of fissure planes at discrete angles around two orthogonal guiding lines (axes), where one is represented by a vertical massif symmetry axis (L1), and the other axis (L2) lies horizontally in the fracture plane. Nonetheless, the rotation along the both axes is codirectional, i.e., when moving counterclockwise around the L1 axis, the L2 rotation is also counterclockwise. If we very tentatively consider a fissure as an ellipse, and take into account the whole assemblage of long and short axes, the overall picture of their spatial distribution generates a screw conoid or ordinary helicoid type structure. It will be shown as an S-shaped plane poles chain in the stereogram. A sequence of large scale fissures (longer than 100 meters), which are 25 to 100 meters apart from each other and regularly vary in strike and dip angle, is mapped in the open pit of the Kovdor apatite-magnetite deposit. The accuracy of positioning for each fissure is a few centimeters in measurement spots, with a deviation from its actual surface due to the