Sample records for ulmanis inches government

  1. Inch by Inch, We Measure

    ERIC Educational Resources Information Center

    Wickstrom, Megan H.; Jurczak, Lindsay M.

    2016-01-01

    In this article, the authors describe how their first-grade class used the book "Inch by Inch" (Lionni 1960)--the story of an inchworm that escapes from a hungry robin by proving he is useful for measuring--as inspiration for a lesson focused on exploring length measurement through examining the meaning of an inch. The authors designed a…

  2. 0.025-inch vs 0.035-inch guide wires for wire-guided cannulation during endoscopic retrograde cholangiopancreatography: A randomized study

    PubMed Central

    Kitamura, Katsuya; Yamamiya, Akira; Ishii, Yu; Sato, Yoshiki; Iwata, Tomoyuki; Nomoto, Tomohiro; Ikegami, Akitoshi; Yoshida, Hitoshi

    2015-01-01

    AIM: To compare the clinical outcomes between 0.025-inch and 0.035-inch guide wires (GWs) when used in wire-guided cannulation (WGC). METHODS: A single center, randomized study was conducted between April 2011 and March 2013. This study was approved by the Medical Ethics Committee at our hospital. Informed, written consent was obtained from each patient prior to study enrollment. Three hundred and twenty-two patients with a naïve papilla of Vater who underwent endoscopic retrograde cholangiopancreatography (ERCP) for the purpose of selective bile duct cannulation with WGC were enrolled in this study. Fifty-three patients were excluded based on the exclusion criteria, and 269 patients were randomly allocated to two groups by a computer and analyzed: the 0.025-inch GW group (n = 109) and the 0.035-inch GW group (n = 160). The primary endpoint was the success rate of selective bile duct cannulation with WGC. Secondary endpoints were the success rates of the pancreatic GW technique and precutting, selective bile duct cannulation time, ERCP procedure time, the rate of pancreatic duct stent placement, the final success rate of selective bile duct cannulation, and the incidence of post-ERCP pancreatitis (PEP). RESULTS: The primary success rates of selective bile duct cannulation with WGC were 80.7% (88/109) and 86.3% (138/160) for the 0.025-inch and the 0.035-inch groups, respectively (P = 0.226). There were no statistically significant differences in the success rates of selective bile duct cannulation using the pancreatic duct GW technique (46.7% vs 52.4% for the 0.025-inch and 0.035-inch groups, respectively; P = 0.884) or in the success rates of selective bile duct cannulation using precutting (66.7% vs 63.6% for the 0.025-inch and 0.035-inch groups, respectively; P = 0.893). The final success rates for selective bile duct cannulation using these procedures were 92.7% (101/109) and 97.5% (156/160) for the 0.025-inch and 0.035-inch groups, respectively (P = 0

  3. 88-Inch Cyclotron

    Science.gov Websites

    , commercial, and international institutions use these beams to understand the effect of radiation on microelectronics, optics, materials, and cells. Click here to see the 88-Inch Cyclotron's contributions to space

  4. Study on 3-inch Hamamatsu photomultipliers

    NASA Astrophysics Data System (ADS)

    Giordano, Valentina; Aiello, Sebastiano; Leonora, Emanuele

    2016-07-01

    Several kinds of photomultipliers are widely used in astroparticle physics detectors to measure Cherenkov light in media like water or ice. In neutrino telescopes the key element of the detector is the optical module, which consists of one or more photodetectors inside a transparent pressure-resistant glass sphere. It serves as mechanical protection while ensuring good light transmission. The KM3NeT collaboration has developed an innovative design of an optical module composed by 31 photomultipliers (PMTs) of 3-inch diameter housed in a 17-inch glass shpere. The performance of the telescope is largely dependent on the presence on noise pulses present on the anode of the photomultipliers. A study was conducted of noise pulses of Hamamatsu 3-inch diameter photomultipliers measuring time and charge distributions of dark pulses, pre-pulses, delayed pulses and after-pulses, focusing in particular on analysis on multiple afterpulses. Effects of the Earth's magnetic field on 3-inch PMTs were also studied.

  5. The impact of wire caliber on ERCP outcomes: a multicenter randomized controlled trial of 0.025-inch and 0.035-inch guidewires.

    PubMed

    Bassan, Milan S; Sundaralingam, Praka; Fanning, Scott B; Lau, James; Menon, Jayaram; Ong, Evan; Rerknimitr, Rungsun; Seo, Dong-Wan; Teo, Eng Kiong; Wang, Hsiu-Po; Reddy, D Nageshwar; Goh, Khean Lee; Bourke, Michael J

    2018-06-01

    Wire-guided biliary cannulation has been demonstrated to improve cannulation rates and reduce post-ERCP pancreatitis (PEP), but the impact of wire caliber has not been studied. This study compares successful cannulation rates and ERCP adverse events by using a 0.025-inch and 0.035-inch guidewire. A randomized, single blinded, prospective, multicenter trial at 9 high-volume tertiary-care referral centers in the Asia-Pacific region was performed. Patients with an intact papilla and conventional anatomy who did not have malignancy in the head of the pancreas or ampulla and were undergoing ERCP were recruited. ERCP was performed by using a standardized cannulation algorithm, and patients were randomized to either a 0.025-inch or 0.035-inch guidewire. The primary outcomes of the study were successful wire-guided cannulation and the incidence of PEP. Overall successful cannulation and ERCP adverse events also were studied. A total of 710 patients were enrolled in the study. The primary wire-guided biliary cannulation rate was similar in 0.025-inch and 0.035-inch wire groups (80.7% vs 80.3%; P = .90). The rate of PEP between the 0.025-inch and the 0.035-inch wire groups did not differ significantly (7.8% vs 9.3%; P = .51). No differences were noted in secondary outcomes. Similar rates of successful cannulation and PEP were demonstrated in the use of 0.025-inch and 0.035-inch guidewires. (Clinical trial registration number: NCT01408264.). Copyright © 2018. Published by Elsevier Inc.

  6. Don't give an inch!

    NASA Astrophysics Data System (ADS)

    Geller, Robert J.

    The camera ready copy (CRC) procedures for Geophysical Research Letters are now being revised. As one of the new editors, I looked through preliminary versions of the new forms and instructions for authors. Remarkably, all of the units (for example, maximum length = 75 inches or 189.9 cm) are given in both British and metric units, despite the fact that AGU's style guide for authors (Eos, October 11, 1988) states that “all quantities must be in metric units.”When I contacted the AGU staff to ask them to eliminate the anachronistic British units they refused, claiming that “In the word-processing packages with which we are familiar all margins are given in inches. It is inconvenient for folks not to have both measurements if the software they are using for making CRC requires them to give commands in the British system.” They did not, however, cite any examples of a software package that will not also accept metric units, perhaps because none exists. All packages with which I am familiar accept both inches and metric units.

  7. Torque expression of 0.018 and 0.022 inch conventional brackets.

    PubMed

    Sifakakis, Iosif; Pandis, Nikolaos; Makou, Margarita; Eliades, Theodore; Katsaros, Christos; Bourauel, Christoph

    2013-10-01

    The aim of this study was to assess the effect of the moments generated with low- and high-torque brackets. Four different bracket prescription-slot combinations of the same bracket type (Mini Diamond® Twin) were evaluated: high-torque 0.018 and 0.022 inch and low-torque 0.018 and 0.022 inch. These brackets were bonded on identical maxillary acrylic resin models with levelled and aligned teeth and each model was mounted on the orthodontic measurement and simulation system (OMSS). Ten specimens of 0.017 × 0.025 inch and ten 0.019 × 0.025 inch stainless steel archwires (ORMCO) were evaluated in the low- and high-torque 0.018 inch and 0.022 inch brackets, respectively. The wires were ligated with elastomerics into the brackets and each measurement was repeated once after religation. Two-way analysis of variance and t-test were conducted to compare the generated moments between wires at low- and high-torque brackets separately. The maximum moment generated by the 0.017 × 0.025 inch stainless steel archwire in the 0.018 inch brackets at +15 degrees ranged from 14.33 and 12.95 Nmm for the high- and low-torque brackets, respectively. The measured torque in the 0.022 inch brackets with the 0.019 × 0.025 inch stainless steel archwire was 9.32 and 6.48 Nmm, respectively. The recorded differences of maximum moments between the high- and low-torque series were statistically significant. High-torque brackets produced higher moments compared with low-torque brackets. Additionally, in both high- and low-torque configurations, the thicker 0.019 × 0.025 inch steel archwire in the 0.022 inch slot system generated lower moments in comparison with the 0.017 × 0.025 inch steel archwire in the 0.018 inch slot system.

  8. 16 CFR 460.20 - R-value per inch claims.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...-values per inch of your product does not drop as it gets thicker. You can list a range of R-value per... add this statement: “The R-value per inch of this insulation varies with thickness. The thicker the...

  9. 16 CFR 500.19 - Conversion of SI metric quantities to inch/pound quantities and inch/pound quantities to SI...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... centimeter=0.393 701 in. 1 yard=0.9144m* 1 meter=3.280 84 ft. Area 1 square inch=6.4516 cm2* 1 square centimeter=0.155 000 in2. 1 square foot=929.0304 cm2* 1 square decimeter=0.107 639 ft2. =9.290 304 dm2 1 square meter=10.763 9 ft2. 1 square yard=0.836 127 m2 Volume or Capacity 1 cubic inch=16.3871 cm3 1 cubic...

  10. 16 CFR 500.19 - Conversion of SI metric quantities to inch/pound quantities and inch/pound quantities to SI...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... centimeter=0.393 701 in. 1 yard=0.9144m* 1 meter=3.280 84 ft. Area 1 square inch=6.4516 cm2* 1 square centimeter=0.155 000 in2. 1 square foot=929.0304 cm2* 1 square decimeter=0.107 639 ft2. =9.290 304 dm2 1 square meter=10.763 9 ft2. 1 square yard=0.836 127 m2 Volume or Capacity 1 cubic inch=16.3871 cm3 1 cubic...

  11. 16 CFR 500.19 - Conversion of SI metric quantities to inch/pound quantities and inch/pound quantities to SI...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... centimeter=0.393 701 in. 1 yard=0.9144m* 1 meter=3.280 84 ft. Area 1 square inch=6.4516 cm2* 1 square centimeter=0.155 000 in2. 1 square foot=929.0304 cm2* 1 square decimeter=0.107 639 ft2. =9.290 304 dm2 1 square meter=10.763 9 ft2. 1 square yard=0.836 127 m2 Volume or Capacity 1 cubic inch=16.3871 cm3 1 cubic...

  12. 16 CFR 500.19 - Conversion of SI metric quantities to inch/pound quantities and inch/pound quantities to SI...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... centimeter=0.393 701 in. 1 yard=0.9144m* 1 meter=3.280 84 ft. Area 1 square inch=6.4516 cm2* 1 square centimeter=0.155 000 in2. 1 square foot=929.0304 cm2* 1 square decimeter=0.107 639 ft2. =9.290 304 dm2 1 square meter=10.763 9 ft2. 1 square yard=0.836 127 m2 Volume or Capacity 1 cubic inch=16.3871 cm3 1 cubic...

  13. LRL 25-inch Bubble Chamber

    DOE R&D Accomplishments Database

    Alvarez, L. W.; Gow, J. D.; Barrera, F.; Eckman, G.; Shand, J.; Watt, R.; Norgren, D.; Hernandez, H. P.

    1964-07-08

    The recently completed 25-inch hydrogen bubble chamber combines excellent picture quality with a fast operating cycle. The chamber has a unique optical system and is designed to take several pictures each Bevatron pulse, in conjunction with the Bevatron rapid beam ejection system.

  14. Torque efficiency of different archwires in 0.018- and 0.022-inch conventional brackets.

    PubMed

    Sifakakis, Iosif; Pandis, Nikolaos; Makou, Margarita; Eliades, Theodore; Katsaros, Christos; Bourauel, Christoph

    2014-01-01

    To compare the archwires inserted during the final stages of the orthodontic treatment with the generated moments at 0.018- and 0.022-inch brackets. The same bracket type, in terms of prescription, was evaluated in both slot dimensions. The brackets were bonded on two identical maxillary acrylic resin models, and each model was mounted on the orthodontic measurement and simulation system. Ten 0.017 × 0.025-inch TMA and ten 0.017 × 0.025-inch stainless steel archwires were evaluated in the 0.018-inch brackets. In the 0.022-inch brackets, ten 0.019 × 0.025-inch TMA and ten 0.019 × 0.025-inch stainless steel archwires were measured. A 15° buccal root torque (+15°) and then a 15° palatal root torque (-15°) were gradually applied to the right central incisor bracket, and the moments were recorded at these positions. A t-test was conducted to compare the generated moments between wires within the 0.018- and 0.022-inch bracket groups separately. The 0.017 × 0.025-inch archwire in the 0.018-inch brackets generated mean moments of 9.25 Nmm and 14.2 Nmm for the TMA and stainless steel archwires, respectively. The measured moments in the 0.022-inch brackets with the 0.019 × 0.025-inch TMA and stainless steel archwires were 6.6 Nmm and 9.3 Nmm, respectively. The 0.017 × 0.025-inch stainless steel and β-Ti archwires in the 0.018-inch slot generated higher moments than the 0.019 × 0.025-inch archwires because of lower torque play. This difference is exaggerated in steel archwires, in comparison with the β-Ti, because of differences in stiffness. The differences of maximum moments between the archwires of the same cross-section but different alloys were statistically significant at both slot dimensions.

  15. Preparatory Study of Photomultiplier Tubes of 10-inch and 3-inch Diameter for KM3NeT Underwater Neutrino Telescope

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Aiello, S.; Giordano, V.; Leonora, E.

    Large area photomultipliers are widely used in neutrino and astro-particle detectors to measure Cherenkov light in media like water or ice. The key element of these detectors are the so-called 'optical module', which consists of a photodetector enclosed in a transparent pressure-resistant container to protect it and ensure good light transmission. KM3NeT collaboration aims to construct an underwater 'hybrid' neutrino telescope by using two models detection unit. The 'tower' detection unit will be composed of large area 10-inch photomultipliers tube enclosed into 13-inch glass vessel sphere. In the 'string' detection unit instead, the light detector will be the 'digital opticalmore » module' (DOM) a glass vessel of 17-inch with 31 photomultipliers of 3- inch diameter looking upwards and downwards. The choice of two different kinds of photomultipliers, obliges us to investigate their main characteristics. Noise pulses at the anode of each photomultiplier strongly affect the performance of the detector. A large study was conducted on noise pulses of large area photomultipliers, considering time and charge distributions of dark pulses, pre-pulses, delayed pulses, and after-pulses. The contribution to noise pulses due to the presence of the external glass vessels was also studied. Moreover the presence of the Earth's magnetic field should modify quantities like gain and transit time spread in photomultipliers and we will deeply investigate on this. (authors)« less

  16. Spherical 5 Inch rocket motor

    NASA Image and Video Library

    1959-05-14

    L59-8368 Spherical 5 Inch rocket motor with radio beacon mounted as a torus around the nozzle. View shows motor as used in trailblazer I vehicles. Photograph published in A New Dimension Wallops Island Flight Test Range: The First Fifteen Years by Joseph Shortal. A NASA publication. Page 678.

  17. Development of a 0.014-inch magnetic resonance imaging guidewire.

    PubMed

    Qiu, Bensheng; Karmarkar, Parag; Brushett, Chris; Gao, Fabao; Kon, Ryan; Kar, Sourav; Atalar, Ergin; Yang, Xiaoming

    2005-04-01

    The purpose of this study was to develop a standard 0.014-inch intravascular magnetic resonance imaging guidewire (MRIG), a coaxial cable with an extension of the inner conductor, specifically designed for use in the small vessels. After a theoretical analysis, the 0.014-inch MRIG was built by plating/cladding highly electrically conductive materials, silver or gold, over the inside and outside of the coaxial conductors. The conductors were made of superelastic, nonmagnetic, biocompatible materials, Nitinol or MP35N. Then, in comparison with a previously designed 0.032-inch MRIG, the performance of the new 0.014-inch MRIG in vitro and in vivo was successfully evaluated. This study represents the initial work to confirm the critical role of highly conductive and superelastic materials in building such small-size MRIGs, which are expected to generate high-resolution MR imaging of vessel walls/plaques and guide endovascular interventional procedures in the small vessels, such as the coronary arteries. Copyright 2005 Wiley-Liss, Inc.

  18. 16. Photocopy of photograph (4 x 5 inch reduction of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Photocopy of photograph (4 x 5 inch reduction of 1939 3-1/4 x 5-5/8 inch print, photographer unknown; in Recreation files, Supervisor's Office, Mt. Baker-Snoqualmie National Forest) GENERAL VIEW, NORTHEAST CORNER, INTERPRETIVE LOG TO LEFT. - Glacier Ranger Station, Washington State Route 542, Glacier, Whatcom County, WA

  19. NuSTAR Inches Toward its Rocket

    NASA Image and Video Library

    2012-02-23

    At Vandenberg Air Force Base processing facility in California, the separation ring on the aft end of NASA Nuclear Spectroscopic Telescope Array NuSTAR, at right, inches its way toward the third stage of an Orbital Sciences Pegasus XL rocket.

  20. 23. Photocopy of photograph (4 x 5 inch enlargement of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. Photocopy of photograph (4 x 5 inch enlargement of 1940 3-1/4 x 4-1/4 inch print by R. Nevan McCullough; in Cultural Resource files, Supervisor's Office, Mt. Baker-Snoqualmie National Forest) SOUTH FRONT - Suntop Lookout, Forest Road 510, Mt. Baker-Snoqualmie National Forest, Greenwater, Pierce County, WA

  1. 4. Photocopy of photograph (4 x 5 inch enlargement of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. Photocopy of photograph (4 x 5 inch enlargement of 1942 3-1/2 x 5-7/8 inch print by R. Fromme; in Recreation files, Supervisor's Office, Mt. Baker-Snoqualmie National Forest) EAST (MAIN) ELEVATION OF PROTECTION ASSISTANT'S RESIDENCE - Glacier Ranger Station, Protection Assistant's Residence, Washington State Route 542, Glacier, Whatcom County, WA

  2. 14. Photocopy of photograph (4 x 5 inch reduction of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Photocopy of photograph (4 x 5 inch reduction of 1939 3-5/8 x 6 inch print by R. Fromme; in Recreation files, Supervisor's Office, Mt. Baker-Snoqualmie National Forest) ENTRANCE TO GLACIER RANGER STATION, FROM WEST. GARAGE AND STORAGE BUILDING IN LEFT BACKGROUND. - Glacier Ranger Station, Washington State Route 542, Glacier, Whatcom County, WA

  3. 15. Photocopy of photograph (4 x 5 inch reduction of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Photocopy of photograph (4 x 5 inch reduction of 1939 3-1/4 x 5-1/2 inch print, photographer unknown; in Recreation files, Supervisor's Office, Mt. Baker-Snoqualmie National Forest) GENERAL VIEW, LOOKING SOUTHWEST, SHOWING INTERPRETIVE LOG AND PROTECTION ASSISTANT'S HOUSE IN BACKGROUND. - Glacier Ranger Station, Washington State Route 542, Glacier, Whatcom County, WA

  4. NSSDC activities with 12-inch optical disk drives

    NASA Technical Reports Server (NTRS)

    Lowrey, Barbara E.; Lopez-Swafford, Brian

    1986-01-01

    The development status of optical-disk data transfer and storage technology at the National Space Science Data Center (NSSDC) is surveyed. The aim of the R&D program is to facilitate the exchange of large volumes of data. Current efforts focus on a 12-inch 1-Gbyte write-once/read-many disk and a disk drive which interfaces with VAX/VMS computer systems. The history of disk development at NSSDC is traced; the results of integration and performance tests are summarized; the operating principles of the 12-inch system are explained and illustrated with diagrams; and the need for greater standardization is indicated.

  5. Acoustic fill factors for a 120 inch diameter fairing

    NASA Technical Reports Server (NTRS)

    Lee, Y. Albert

    1992-01-01

    Data from the acoustic test of a 120-inch diameter payload fairing were collected and an analysis of acoustic fill factors were performed. Correction factors for obtaining a weighted spatial average of the interior sound pressure level (SPL) were derived based on this database and a normalized 200-inch diameter fairing database. The weighted fill factors were determined and compared with statistical energy analysis (VAPEPS code) derived fill factors. The comparison is found to be reasonable.

  6. Finite element analysis of the Space Shuttle 2.5-inch frangible nut

    NASA Technical Reports Server (NTRS)

    McKinnis, Darin N.

    1994-01-01

    Finite element analysis of the Space Shuttle 2.5-inch frangible nut was conducted to improve understanding of the current design and proposed design changes to this explosively-actuated nut. The 2.5-inch frangible nut is used in two places to attach the aft end of the Space Shuttle Orbiter to the External Tank. Both 2.5-inch frangible nuts must function to complete safe separation. The 2.5-inch frangible nut contains two explosive boosters containing RDX explosive each capable of splitting the nut in half, on command from the Orbiter computers. To ensure separation, the boosters are designed to be redundant. The detonation of one booster is sufficient to split the nut in half. However, beginning in 1987 some production lots of 2.5-inch frangible nuts have demonstrated an inability to separate using only a single booster. The cause of the failure has been attributed to differences in the material properties and response of the Inconel 718 from which the 2.5-inch frangible nut is manufactured. Subsequent tests have resulted in design modifications of the boosters and frangible nut. Model development and initial analysis was conducted by Sandia National Laboratories (SNL) under funding from NASA Lyndon B. Johnson Space Center (NASA-JSC) starting in 1992. Modeling codes previously developed by SNL were transferred to NASA-JSC for further analysis on this and other devices. An explosive bolt with NASA Standard Detonator (NSD) charge, a 3/4-inch frangible nut, and the Super*Zip linear separation system are being modeled by NASA-JSC.

  7. Quartz 9-inch size mask blanks for ArF PSM (Phase Shift Mask)

    NASA Astrophysics Data System (ADS)

    Harashima, Noriyuki; Isozaki, Tatsuya; Kawanishi, Arata; Kanai, Shuichiro; Kageyama, Kagehiro; Iso, Hiroyuki; Chishima, Tatsuya

    2017-07-01

    Semiconductor technology nodes are steadily miniaturizing. On the other hand, various efforts have been made to reduce costs, mass production lines have shifted from 200 mmφ of Si wafer to 300 mmφ, and technology development of Si wafer 450 mmφ is also in progress. As a photomask, 6-inch size binary Cr mask has been used for many years, but in recent years, the use of 9-inch binary Cr masks for Proximity Lithography Process in automotive applications, MEMS, packages, etc. has increased, and cost reduction has been taken. Since the miniaturization will progress in the above applications in the future, products corresponding to miniaturization are also desired in 9-inch photomasks. The high grade Cr - binary mask blanks used in proximity exposure process, there is a prospect of being able to use it by ULVAC COATING CORPORATION's tireless research. As further demands for miniaturization, KrF and ArF Lithography Process, which are used for steppers and scanners , there are also a demand for 9-inch size Mask Blanks. In ULVAC COATING CORPORATION, we developed a 9 - inch size KrF PSM mask Blanks prototype in 2016 and proposed a new high grade 9 - inch photomask. This time, we have further investigated and developed 9-inch size ArF PSM Mask Blanks corresponding to ArF Lithography Process, so we report it.

  8. 41. 44INCH SOAKING PITS. A MORGAN CRANE LOWERS THE STEEL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    41. 44-INCH SOAKING PITS. A MORGAN CRANE LOWERS THE STEEL INGOT INTO A 'SOAKING PIT,' WHERE IT IS HEATED TO A UNIFORM TEMPERATURE PRIOR TO ROLLING. THE INGOT RECEIVES ITS FIRST ROLLING ON THE 44-INCH BLOOMING MILL. - Corrigan, McKinney Steel Company, 3100 East Forty-fifth Street, Cleveland, Cuyahoga County, OH

  9. Results of a 24-inch Hybrid Motor Performance Uncertainty Analysis

    NASA Technical Reports Server (NTRS)

    Sims, Joseph D.; Coleman, Hugh W.

    1998-01-01

    The subscale (11 and 24-inch) hybrid motors at the Marshall Space Flight Center (MSFC) have been used as versatile and cost effective testbeds for developing new technology. Comparisons between motor configuration, ignition systems, feed systems, fuel formulations, and nozzle materials have been carried out without detailed consideration as to haw "good" the motor performance data were. For the 250,000 lb/thrust motor developed by the Hybrid Propulsion Demonstration Program consortium, this shortcoming is particularly risky because motor performance will likely be used as put of a set of downselect criteria to choose between competing ignition and feed systems under development. This analysis directly addresses that shortcoming by applying uncertainty analysis techniques to the experimental determination of the characteristic velocity, theoretical characteristic velocity, and characteristic velocity efficiency for a 24-inch motor firing. With the adoption of fuel-lined headends, flow restriction, and aft mixing chambers, state of the an 24-inch hybrid motors have become very efficient However, impossibly high combustion efficiencies (some computed as high as 108%) have been measured in some tests with 11-inch motors. This analysis has given new insight into explaining how these efficiencies were measured to be so high, and into which experimental measurements contribute the most to the overall uncertainty.

  10. 45. FINISHING STANDS, 98INCH CONTINUOUS HOT STRIP MILL, WORLD'S LARGEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    45. FINISHING STANDS, 98-INCH CONTINUOUS HOT STRIP MILL, WORLD'S LARGEST AT THE TIME OF INSTALLATION IN 1937. THE MILL WAS REPLACED BY A NEW 84-INCH MILL IN 1971 AND IS SEEN HERE PARTIALLY DISMANTLED IN PREPARATION FOR DEMOLITION. - Corrigan, McKinney Steel Company, 3100 East Forty-fifth Street, Cleveland, Cuyahoga County, OH

  11. Hot-mix asphalt placement : Virginia's move to a two-inch drop-off.

    DOT National Transportation Integrated Search

    2006-01-01

    In 2004, the Virginia Department of Transportation (VDOT) began examining the effects of allowing a 2-inch drop-off, rather than the specified 1.5-inch drop-off, between adjacent lanes. VDOT implemented a pilot program in its Northern Virginia Distri...

  12. Specification for wide channel bandwidth one-inch video tape

    NASA Technical Reports Server (NTRS)

    Perry, Jimmy L.

    1988-01-01

    Standards and controls are established for the procurement of wide channel bandwidth one inch video magnetic recording tapes for Very Long Base Interferometer (VLBI) system applications. The Magnetic Tape Certification Facility (MTCF) currently maintains three specifications for the Quality Products List (QPL) and acceptance testing of magnetic tapes. NASA-TM-79724 is used for the QPL and acceptance testing of new analog tapes; NASA-TM-80599 is used for QPL and acceptance testing of new digital tapes; and NASA-TM-100702 is used for the QPL and acceptance testing of new IBM/IBM compatible 3480 magnetic tape cartridges. This specification will be used for the QPL and acceptance testing of new wide channel bandwidth one inch video magnetic recording tapes. The one inch video tapes used by the Jet Propulsion Lab., the Deep Space Network and the Haystack Observatory will be covered by this specification. These NASA stations will use the video tapes for their VLBI system applications. The VLBI system is used for the tracking of quasars and the support of interplanetary exploration.

  13. 29. INDUCTION MOTOR (6600 VOLTS, 5750 H.P.) DRIVES THE 21INCH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    29. INDUCTION MOTOR (6600 VOLTS, 5750 H.P.) DRIVES THE 21-INCH AND 18-INCH BILLET MILLS. MOTOR WAS MANUFACTURED BY THE GENERAL ELECTRIC COMPANY, SCHENECTADY, NEW YORK. - Corrigan, McKinney Steel Company, 3100 East Forty-fifth Street, Cleveland, Cuyahoga County, OH

  14. NO PLIF Imaging in the CUBRC 48-inch Shock Tunnel

    DTIC Science & Technology

    2012-01-01

    Exp Fluids (2012) 53:1637-1646 OOI 10.1007/s00348-012-1381-6 RESEARCH ARTICLE NO PLIF imaging in the CUBRC 48-inch shock tunnel N. Jiang· J...Center’s (CUBRC) 48-inch Mach 9 hypervelocity shock tunnel using a pulse burst laser-based high frame rate imaging system. Sequences of up to ten images...2002) have been performed in the Australia National University’s T2 free- piston shock tunnel . More recently, two-component Doppler- shift-based

  15. Design of Tools for Press-countersinking or Dimpling 0.040-inch-thick-24S-T Sheet

    NASA Technical Reports Server (NTRS)

    Templin, R L; Fogwell, J W

    1942-01-01

    A set of dimpling tools was designed for 0.040-inch 24S-T sheet and flush-type rivets 1/8 inch in diameter with 100 degree countersunk heads. The dimples produced under different conditions of pressure, sheet thickness, and drill diameter are presented as cross-sectional photographs magnified 20 times. The most satisfactory values for the dimpling tools were found to be: maximum punch diameter, 0.231 inch; maximum die diameter, 0.223 inch; maximum mandrel diameter, 0.128 inch; dimple angle, 100 degree; punch springback angle, 1 1/2 degree; and die springback angle, 2 degree.

  16. Orthopedic stretcher with average-sized person can pass through 18-inch opening

    NASA Technical Reports Server (NTRS)

    Lothschuetz, F. X.

    1966-01-01

    Modified Robinson stretcher for vertical lifting and carrying, will pass through an opening 18 inches in diameter, while containing a person of average height and weight. A subject 6 feet tall and weighing 200 pounds was lowered and raised out of an 18 inch diameter opening in a tank to test the stretcher.

  17. George Ellery Hale, Caltech Astrophysics, and the Hale 200-inch Telescope, 1920-1948

    NASA Astrophysics Data System (ADS)

    Osterbrock, D. E.

    1998-05-01

    Caltech and the 200-inch Hale telescope on Palomar are two of George Ellery Hale's many creations in Southern California. He brought the California Institute of Technology into existence in 1920; Palomar Observatory was built for it. However, even before Hale had "secured" the funds for the 200-inch, astrophysical research had been underway on the Caltech campus in Pasadena, and it intensified after the Rockefeller grant came through. Interactions between the campus, Palomar Mountain, and Mount Wilson Obervatory (one of Hale's earlier creations) played important roles in determining the course of Caltech astrophysics. Changing funding patterns (from private philanthropy to drought, then "defense" weapons-development programs, and then governmental agencies designed to support scientific research) will be briefly described. The 18-inch Schmidt, built at the Caltech (200-inch Telescope) Shop, went into operation in 1936, the first research telescope on Palomar. The 200-inch, essentially completed, was dedicated in 1948 and went into operation for regularly scheduled research observations near the end of 1949. Its coude spectrograph was completed and put into regular use in stages from 1950 to 1952, Among the most important leaders of Caltech astrophysics up to 1948 and the years immediately after it when the 200-inch went into full operation were Robert A. Millikan, Max Mason, and Lee A. DuBridge. Some of the astrophysicists who worked at Caltech and Palomar were Albert Einstein, Richard C. Tolman, Fritz Zwicky, Ira S. Bowen, John A. Anderson, Sinclair Smith, John Strong, William A. Fowler and, just at the end of this period, Jesse L. Greenstein. Some of the key staff personnel were Russell W. Porter, Don O. Hendrix (on loan), and Byron Hill.

  18. Palomar 60-inch SEDM classification of optical transients

    NASA Astrophysics Data System (ADS)

    Fremling, Christoffer; Blagorodnova, Nadejda; Neill, James D.; Walters, Richard; Cannella, Christopher B.; Kulkarni, Shrinivas R.

    2018-03-01

    We report the classification of the following bright transients. The spectra have been obtained with the Spectral Energy Distribution Machine (SEDM) (range 350-950nm, spectral resolution R 100) mounted on the Palomar 60-inch (P60) telescope (Blagorodnova et. al. 2018).

  19. Progress in Electron Beam Mastering of 100 Gbit/inch2 Density Disc

    NASA Astrophysics Data System (ADS)

    Takeda, Minoru; Furuki, Motohiro; Yamamoto, Masanobu; Shinoda, Masataka; Saito, Kimihiro; Aki, Yuichi; Kawase, Hiroshi; Koizumi, Mitsuru; Miyokawa, Toshiaki; Mutou, Masao; Handa, Nobuo

    2004-07-01

    We developed an electron beam recorder (EBR) capable of recording master discs under atmospheric conditions using a novel differential pumping head. Using the EBR and optimized fabrication process for Si-etched discs with reactive ion etching (RIE), a bottom signal jitter of 9.6% was obtained from a 36 Gbit/inch2 density disc, readout using a near-field optical pickup with an effective numerical aperture (NA) of 1.85 and a wavelength of 405 nm. We also obtained the eye patterns from a 70 Gbit/inch2 density disc readout using an optical pickup with a 2.05 NA and the same wavelength, and showed almost the same modulation ratio as the simulation value. Moreover, the capability of producing pit patterns corresponding to a 104 Gbit/inch2 density is demonstrated.

  20. Palomar 60-inch SEDM classification of optical transients

    NASA Astrophysics Data System (ADS)

    Fremling, Christoffer; Blagorodnova, Nadejda; Kupfer, Thomas; Neill, James D.; Walters, Richard; Cannella, Christopher B.; Kulkarni, Shrinivas R.

    2018-04-01

    We report the classification of the following bright transients. The spectra have been obtained with the Spectral Energy Distribution Machine (SEDM) (range 350-950nm, spectral resolution R 100) mounted on the Palomar 60-inch (P60) telescope (Blagorodnova et. al. 2018, PASP, 130, 5003).

  1. Palomar 60-inch SEDM classification of optical transients

    NASA Astrophysics Data System (ADS)

    Blagorodnova, Nadejda; Fremling, Christoffer; Neill, James D.; Walters, Richard; Cannella, Christopher B.; Kulkarni, Shrinivas R.

    2018-03-01

    We report the classification of the following bright transients. The spectra have been obtained with the Spectral Energy Distribution Machine (SEDM) (range 350-950nm, spectral resolution R 100) mounted on the Palomar 60-inch (P60) telescope (Blagorodnova et. al. 2018, PASP, 130, 5003).

  2. The George C. Marshall Space Flight Center's 14 X 14-Inch Trisonic Wind Tunnel: A Historical Perspective

    NASA Technical Reports Server (NTRS)

    Springer, A.

    1994-01-01

    A history of the National Aeronautics and Space Administration (NASA) George C. Marshall Space Flight Center's (MSFC) 14 x 14-Inch Trisonic Wind Tunnel is presented. Its early and continuing role in the United States space program is shown through highlights of the tunnel's history and the major programs tested in the tunnel over the past 40 years. The 14-Inch Tunnel has its beginning with the Army in the late 1950's under the Army Ballistic Missile Agency (ABMA). Such programs as the Redstone, Jupiter, Pershing, and early Saturn were tested in the 14-Inch Tunnel in the late 1950's. America's first launch vehicle, the Jupiter C, was designed and developed using the 14-Inch Wind Tunnel. Under NASA, the 14-Inch Wind Tunnel has made large contributions to the Saturn, Space Transportation System, and future launch vehicle programs such as Shuttle-C and the National Launch System. A technical description of the tunnel is presented for background information on the type and capabilities of the 14-Inch Wind Tunnel. The report concludes in stating: the 14-Inch Wind Tunnel as in speed of sound; transonic, at or near the speed of sound the past, will continue to play a large but unseen role in he development of America's space program.

  3. 16 CFR 460.20 - R-value per inch claims.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... HOME INSULATION § 460.20 R-value per inch claims. In labels, fact sheets, ads, or other promotional... here, you can petition to amend the order. (b) You can do this if actual test results prove that the R...

  4. 16 CFR 460.20 - R-value per inch claims.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... HOME INSULATION § 460.20 R-value per inch claims. In labels, fact sheets, ads, or other promotional... here, you can petition to amend the order. (b) You can do this if actual test results prove that the R...

  5. 16 CFR 460.20 - R-value per inch claims.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... HOME INSULATION § 460.20 R-value per inch claims. In labels, fact sheets, ads, or other promotional... here, you can petition to amend the order. (b) You can do this if actual test results prove that the R...

  6. 16 CFR 460.20 - R-value per inch claims.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... HOME INSULATION § 460.20 R-value per inch claims. In labels, fact sheets, ads, or other promotional... here, you can petition to amend the order. (b) You can do this if actual test results prove that the R...

  7. Development of the vertical Bridgman technique for 6-inch diameter c-axis sapphire growth supported by numerical simulation

    NASA Astrophysics Data System (ADS)

    Miyagawa, Chihiro; Kobayashi, Takumi; Taishi, Toshinori; Hoshikawa, Keigo

    2014-09-01

    Based on the growth of 3-inch diameter c-axis sapphire using the vertical Bridgman (VB) technique, numerical simulations were made and used to guide the growth of a 6-inch diameter sapphire. A 2D model of the VB hot-zone was constructed, the seeding interface shape of the 3-inch diameter sapphire as revealed by green laser scattering was estimated numerically, and the temperature distributions of two VB hot-zone models designed for 6-inch diameter sapphire growth were numerically simulated to achieve the optimal growth of large crystals. The hot-zone model with one heater was selected and prepared, and 6-inch diameter c-axis sapphire boules were actually grown, as predicted by the numerical results.

  8. Altitude-chamber performance of British Rolls-Royce Nene II engine III : 18.00-inch-diameter jet nozzle

    NASA Technical Reports Server (NTRS)

    Grey, Ralph E; Brightwell, Virginia L; Barson, Zelmar; NACA

    1950-01-01

    An altitude-chamber investigation of British Rolls-Royce Nene II turbojet engine was conducted over range of altitudes from sea level to 65,000 feet and ram pressure ratios from 1.10 to 3.50, using an 18.00-inch-diameter jet nozzle. The 18.00-inch-diameter jet nozzle gave slightly lower values of net-thrust specific fuel consumption than either the 18.41- or the standard 18.75-inch-diameter jet nozzles at high flight speeds. At low flight speeds, the 18.41-inch-diameter jet nozzle gave the lowest value of net-thrust specific fuel consumption.

  9. Local Analogues: Comparing a 12 inch Telescope to the Hubble

    NASA Astrophysics Data System (ADS)

    Moore, Nathaniel; DeGroot, Laura

    2018-01-01

    The College of Wooster Campus Observatory is home to two telescopes: an 8 inch and a 12 inch. We aimed to test the limits of the observatory equipment and conditions by targeting nearby galaxies, to determine their morphology based on lower resolution. We suspected that this resolution would be similar to that of the Hubble Telescope (HST) for galaxies with a higher redshift. From our images, we hoped to find various variables related to the morphology of the nearby galaxies. These variables included the Sérsic index, concentration, asymmetry, smoothness, the Gini coefficient, and M20. From here, we hoped that these would allow us to create a comparison between lower resolution galaxies that are nearby and galaxies with a higher redshift with similar resolutions.

  10. CFD Analysis of the 24-inch JIRAD Hybrid Rocket Motor

    NASA Technical Reports Server (NTRS)

    Liang, Pak-Yan; Ungewitter, Ronald; Claflin, Scott

    1996-01-01

    A series of multispecies, multiphase computational fluid dynamics (CFD) analyses of the 24-inch diameter joint government industry industrial research and development (JIRAD) hybrid rocket motor is described. The 24-inch JIRAD hybrid motor operates by injection of liquid oxygen (LOX) into a vaporization plenum chamber upstream of ports in the hydroxyl-terminated polybutadiene (HTPB) solid fuel. The injector spray pattern had a strong influence on combustion stability of the JIRAD motor so a CFD study was initiated to define the injector end flow field under different oxidizer spray patterns and operating conditions. By using CFD to gain a clear picture of the flow field and temperature distribution within the JIRAD motor, it is hoped that the fundamental mechanisms of hybrid combustion instability may be identified and then suppressed by simple alterations to the oxidizer injection parameters such as injection angle and velocity. The simulations in this study were carried out using the General Algorithm for Analysis of Combustion SYstems (GALACSY) multiphase combustion codes. GALACSY consists of a comprehensive set of droplet dynamic submodels (atomization, evaporation, etc.) and a computationally efficient hydrocarbon chemistry package built around a robust Navier-Stokes solver optimized for low Mach number flows. Lagrangian tracking of dispersed particles describes a closely coupled spray phase. The CFD cases described in this paper represent various levels of simplification of the problem. They include: (A) gaseous oxygen with combusting fuel vapor blowing off the walls at various oxidizer injection angles and velocities, (B) gaseous oxygen with combusting fuel vapor blowing off the walls, and (C) liquid oxygen with combusting fuel vapor blowing off the walls. The study used an axisymmetric model and the results indicate that the injector design significantly effects the flow field in the injector end of the motor. Markedly different recirculation patterns are

  11. Converting international ¼ inch tree volume to Doyle

    Treesearch

    Aaron Holley; John R. Brooks; Stuart A. Moss

    2014-01-01

    An equation for converting Mesavage and Girard's International ¼ inch tree volumes to the Doyle log rule is presented as a function of tree diameter. Volume error for trees having less than four logs exhibited volume prediction errors within a range of ±10 board feet. In addition, volume prediction error as a percent of actual Doyle tree volume...

  12. 36. ISLAND PLANT: Nos. 1 AND 2 TWENTYSIX INCH HORIZONTAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. ISLAND PLANT: Nos. 1 AND 2 TWENTY-SIX INCH HORIZONTAL SAMSON TURBINES - American Falls Water, Power & Light Company, Island Power Plant, Snake River, below American Falls Dam, American Falls, Power County, ID

  13. 37. ISLAND PLANT: Nos. 1 AND 2 TWENTYSIX INCH SPECIAL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. ISLAND PLANT: Nos. 1 AND 2 TWENTY-SIX INCH SPECIAL HORIZONTAL SAMSON TURBINE (RIVITED CASE) - American Falls Water, Power & Light Company, Island Power Plant, Snake River, below American Falls Dam, American Falls, Power County, ID

  14. Development of a 3/4-inch minus base course type a specification for Montana : final report.

    DOT National Transportation Integrated Search

    2016-12-01

    Gravel bases are a critical component of roads, providing drainage, structural support, and load distribution within the pavement structure. Montana specifications currently exist for a 2-inch minus (Grade 5A) and 1- inch minus (Grade 6A) crushed b...

  15. 62 percent of pine lumbar is cut from 10-inch or smaller logs in the Central Piedmont of South Carolina

    Treesearch

    William H.B. Haines

    1953-01-01

    Pine logs as small as 5 inches in diameter inside bark and trees 6 inches in diameter breast high are utilized for saw timber in the South Carolina Piedmont. More lumber is sawed from 8-inch logs than from any other size, while 12- and 14-inch trees provide nearly 50 percent of the board-foot volume cut. The bar graphs are based on measurements of 1,029 logs at 25...

  16. 50 CFR Figure 12 to Part 223 - Escape Opening & Cover Dimensions for 71-inch TED

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 50 Wildlife and Fisheries 10 2014-10-01 2014-10-01 false Escape Opening & Cover Dimensions for 71-inch TED 12 Figure 12 to Part 223 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL... ANADROMOUS SPECIES Pt. 223, Fig. 12 Figure 12 to Part 223—Escape Opening & Cover Dimensions for 71-inch TED...

  17. 50 CFR Figure 12 to Part 223 - Escape Opening & Cover Dimensions for 71-inch TED

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 50 Wildlife and Fisheries 10 2013-10-01 2013-10-01 false Escape Opening & Cover Dimensions for 71-inch TED 12 Figure 12 to Part 223 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL... ANADROMOUS SPECIES Pt. 223, Fig. 12 Figure 12 to Part 223—Escape Opening & Cover Dimensions for 71-inch TED...

  18. 26. INTERIOR VIEW WITH CLEANING OF A 12 INCH FLANGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. INTERIOR VIEW WITH CLEANING OF A 12 INCH FLANGE ELBOW CASTING. JAMES CRUMB USED A SWING FRAME GRINDER TO CLEAN (GRIND SEAMS FROM) THIS 'EL.' - Stockham Pipe & Fittings Company, Grey Iron Foundry, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

  19. Force testing manual for the Langley 20-inch Mach 6 tunnel

    NASA Technical Reports Server (NTRS)

    Keyes, J. W.

    1977-01-01

    Data reduction and procedures for conducting force tests in a 20 inch Mach 6 tunnel are described. A discussion of pretest and testing phases are included. Items that are to be checked during model design and construction are outlined as well as safety requirements, starting loads tests, instructions for data acquisition and model installation. Measurement of balance and model misalignment and instructions for calibrating the angle of attack screen are covered. Procedures for making reference pressure, attitude tare, and data runs are included. The 20 inch tunnel force program is examined, and a description of data recording system input and load contrast sheets is given. An appendix presents a description, operating characteristics, and Mach number calibration of the tunnel, as well as tunnel characteristics.

  20. Effects of Authoritarianism on the Teaching of National History: The Case of Latvia

    ERIC Educational Resources Information Center

    Abens, Aija

    2015-01-01

    Recent research on history teaching has begun to focus on political motivation. This paper is the result of the author's dissertation, which investigates Latvian history teaching under the authoritarian regimes of Ulmanis and Stalin. It reveals the effects of authoritarianism on goals, curriculum, teaching materials and methods, and the teacher's…

  1. 24 Inch Reusable Solid Rocket Motor Test

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A scaled-down 24-inch version of the Space Shuttle's Reusable Solid Rocket Motor was successfully fired for 21 seconds at a Marshall Space Flight Center (MSFC) Test Stand. The motor was tested to ensure a replacement material called Lycocel would meet the criteria set by the Shuttle's Solid Motor Project Office. The current material is a heat-resistant, rayon-based, carbon-cloth phenolic used as an insulating material for the motor's nozzle. Lycocel, a brand name for Tencel, is a cousin to rayon and is an exceptionally strong fiber made of wood pulp produced by a special 'solvent-spirning' process using a nontoxic solvent. It will also be impregnated with a phenolic resin. This new material is expected to perform better under the high temperatures experienced during launch. The next step will be to test the material on a 48-inch solid rocket motor. The test, which replicates launch conditions, is part of Shuttle's ongoing verification of components, materials, and manufacturing processes required by MSFC, which oversees the Reusable Solid Rocket Motor project. Manufactured by the ATK Thiokol Propulsion Division in Promontory, California, the Reusable Solid Rocket Motor measures 126 feet (38.4 meters) long and 12 feet (3.6 meters) in diameter. It is the largest solid rocket motor ever flown and the first designed for reuse. During its two-minute burn at liftoff, each motor generates an average thrust of 2.6 million pounds (1.2 million kilograms).

  2. Comparision of Incidental Reflection From Containerized Maintenance/Housekeeping Solutions and One Inch of Water

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chapman, Bryan Scott; MacQuigg, Michael Robert; Wysong, Andrew Russell

    This document addresses the incidental reflector reactivity worth of containerized maintenance/housekeeping fluids for use in PF-4 at Los Alamos National Laboratory (LANL). The intent of the document is to analyze containerized maintenance/housekeeping fluids which will be analyzed as water that may be present under normal conditions of an operation. The reactivity worth is compared to the reactivity worth due to I-inch of close-fitting 4n water reflection and I-inch of close-fitting radial water reflection. Both have been used to bound incidental reflection by 2-liter bottles in criticality safety evaluations. The conclusion is that, when the maintenance/housekeeping fluids are containerized the reactivitymore » increase from a configuration which is bounding of normal conditions (up to eight bottles modeled with 2-liters of solution at varying diameter) is bound by I-inch of close fitting 4n water relection.« less

  3. Ten inch Planar Optic Display

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Beiser, L.; Veligdan, J.

    A Planar Optic Display (POD) is being built and tested for suitability as a high brightness replacement for the cathode ray tube, (CRT). The POD display technology utilizes a laminated optical waveguide structure which allows a projection type of display to be constructed in a thin (I to 2 inch) housing. Inherent in the optical waveguide is a black cladding matrix which gives the display a black appearance leading to very high contrast. A Digital Micromirror Device, (DMD) from Texas Instruments is used to create video images in conjunction with a 100 milliwatt green solid state laser. An anamorphic opticalmore » system is used to inject light into the POD to form a stigmatic image. In addition to the design of the POD screen, we discuss: image formation, image projection, and optical design constraints.« less

  4. High-Subsonic Performance Characteristics and Boundary-Layer Investigations of a 12 deg 10-Inch-Inlet-Diameter Conical Diffuser

    DTIC Science & Technology

    1950-05-11

    available condition supersonic flow was obtained as far as K.5 inches downstream from the diffueer inlet with a maximum Mach number of M % 1.5...Boundary—layer total-pressure measurements were made with the rake shown in figure k. The tubes varied in size from 0.030-Inch outside diameter...at the wall to 0.050—inch outside diameter farther out. A static-pressure tube was mounted on the rake to measure static pressures at the same

  5. 18. Photocopy of drawing (22 x 34 inch diazo located ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Photocopy of drawing (22 x 34 inch diazo located in the recreation files, Mt. Baker-Snoqualmie N. F.). G. STAVI, 1970. 1ST & 2ND FLOOR PLANS, ALTERATIONS TO CASCADE FILED STATION, GLACIER, WASHINGTON. - Austin Pass Warming Hut, Washington Highway 542, Glacier, Whatcom County, WA

  6. Engineer W.J. O'Sullivan, Jr. with 20 Inch Subsatellite

    NASA Image and Video Library

    1957-01-05

    L57-525 Engineer W.J. O Sullivan, Jr., looks at inflated 20 inch subsatellite while holding inflation bottle and folded duplicate copy, February 1957. Photograph published in A New Dimension Wallops Island Flight Test Range: The First Fifteen Years by Joseph Shortal. A NASA publication. Page 601.

  7. A fully automated digitally controlled 30-inch telescope

    NASA Technical Reports Server (NTRS)

    Colgate, S. A.; Moore, E. P.; Carlson, R.

    1975-01-01

    A fully automated 30-inch (75-cm) telescope has been successfully designed and constructed from a military surplus Nike-Ajax radar mount. Novel features include: closed-loop operation between mountain telescope and campus computer 30 km apart via microwave link, a TV-type sensor which is photon shot-noise limited, a special lightweight primary mirror, and a stepping motor drive capable of slewing and settling one degree in one second or a radian in fifteen seconds.

  8. 26. CURRENT METERS WITH FOLDING SCALE (MEASURED IN INCHES) IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    26. CURRENT METERS WITH FOLDING SCALE (MEASURED IN INCHES) IN FOREGROUND: GURLEY MODEL NO. 665 AT CENTER, GURLEY MODEL NO. 625 'PYGMY' CURRENT METER AT LEFT, AND WES MINIATURE PRICE-TYPE CURRENT METER AT RIGHT. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

  9. Time to dry 2-, 3-, and 4-inch S4S southern pine at 240°F as related to board width

    Treesearch

    P. Koch

    1974-01-01

    With 80°F wet-bulb depression and air cross-circulated at 1,000 fpm, southern pine in 2-, 3-, and 4-inch thicknesses attained 10 percent moisture content in 22.4, 35.6, and 45.3 hours. In 3- and 4-inch thicknesses, 4-inch-wide lumber required less time to dry than that 8 or 12 inches wide. Surface checks were absent or moderate in all thicknesses and widths. End-...

  10. Time to dry 2-, 30, and 40inch S4S southern pine at 240°F, as related to board width

    Treesearch

    Peter Koch

    1973-01-01

    With 80°F wet-bulb depression and air cross-circulated at 1,000 fbm, southern pine in 2-, 3-, and 4-inch thicknesses attained 10 percent moisture content in 22.4, 35.6, and 45.3 hours. In 3- and 4-inch thicknesses, 4-inch-wide lumber required less time to dry than that 8 or 12 inches wide. Surface checks were absent or moderate in all thicknesses and widths. End-...

  11. Child seat belt guidelines: Examining the 4 feet 9 inches rule as the standard.

    PubMed

    Morse, Amber M; Aitken, Mary E; Mullins, Samantha H; Miller, Beverly K; Pomtree, Mindy M; Ulloa, Erin M; Montgomery, Jeffrey S; Saylors, Marie E

    2017-08-01

    Current American Academy of Pediatrics recommendations regarding transition from child safety/booster seat to adult safety belt use indicate that children should be at least 4 feet 9 inches, 8 years old, or 80 pounds. Proper fit in the vehicle seat, assessed with a five-point fit test, should also be met. Although most children reach 4 feet 9 inches around age 8 years, each child and vehicle presents a unique combination; thus a child may not fit appropriately in all vehicle types using only the 4 feet 9 inches requirement. We enrolled children, aged 7 years to 12 years, into our study. Height, weight, and demographic data were obtained. A Child Passenger Safety Technician then performed the five-point fit test in each of a uniform lineup of five vehicles. Data were collected on fit in the standard vehicle seat and also in a booster seat. We set 90% as the threshold proportion of children who meet all criteria for proper fit to validate current recommendations of a height of 4 feet 9 inches. Data were collected on 388 children. The percentage of 90% proper fit was met in the compact car and small sport-utility vehicle (SUV). However, only 80 (77%) of 104 students (p < 0.0001) that were 4 feet 9 inches or higher fit properly in the large SUV, only 87 (83%) of 105 students (p = 0.02) fit properly in the pickup truck, and only 91 (89%) of 102 students (p = 0.74) fit properly in the minivan. Substantial proportions of children meeting current height guidelines for an adult seat belt do not meet safety requirements for fit, especially in larger, commonly used vehicles (large SUVs and trucks). This emphasizes the need for evaluation of fit by a trained personnel and/or development of standard back seat dimensions in all vehicles for maximum safety. Epidemiologic study, level III; Therapeutic study, level V.

  12. Stand Development 25 Years after a 9.0-inch Diameter-Limit First Cutting In Appalachian Hardwoods

    Treesearch

    H. Clay Smith; N. I. Lamson

    1977-01-01

    This report is a case history of stand development 25 years after a 9.0-inch diameter-limit cutting in a primarily second growth 40- to 45-year-old Appalachian hardwood stand. Some old residual trees from the early 1900 logging era were scattered throughout the stand. In 1950, a 9.0-inch diameter-limit cutting removed 8,650 board feet per acre and reduced the basal...

  13. Ultrasound instrumentation for the 7 inch Mach seven tunnel

    NASA Technical Reports Server (NTRS)

    Mazel, D. S.; Mielke, R. R.

    1985-01-01

    The use of an Apple II+ microcomputer to collect data during the operation of the 7 inch Mach Seven Tunnel is discussed. A method by which the contamination of liquid oxygen is monitored with sound speed techniques is investigated. The electrical equivalent of a transducer bonded to a high pressure fill plug is studied. The three areas are briefly explained and data gathered for each area are presented.

  14. Three rings-per-inch, dense southern pine-- Should it be developed?

    Treesearch

    P. Koch

    1972-01-01

    Three-rings-per-inch, dense southern pine is a debatable goal in forests managed for solid wood products, but possibilities are evident. The problems lie in product specifications, strength, attractiveness, paint retention, gluing characteristics and machinability. An interim goal for southern pine silviculturists is suggested.

  15. Three rings-per-inch dense southern pine - should it be developed?

    Treesearch

    Peter Koch

    1971-01-01

    Three-rings-per-inch, dense southern pine is a debatable goal in forests managed for solid wood products, but possibilities are evident. The problems lie in product specifications, strength, attractiveness, paint retention, gluing characteristics and machinability. An interim goal for southern pine silviculturists is suggested.

  16. Affordable Window Insulation with R-10/inch Rating

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jenifer Marchesi Redouane Begag; Je Kyun Lee; Danny Ou

    2004-10-15

    During the performance of contract DE-FC26-00-NT40998, entitled ''Affordable Window Insulation with R-10/inch Value'', research was conducted at Aspen Aerogels, Inc. to develop new transparent aerogel materials suitable for window insulation applications. The project requirements were to develop a formulation or multiple formulations that have high transparency (85-90%) in the visible region, are hydrophobic (will not opacify with exposure to water vapor or liquid), and have at least 2% resiliency (interpreted as recoverable 2% strain and better than 5% strain to failure in compression). Results from an unrelated project showed that silica aerogels covalently bonded to organic polymers exhibit excellent mechanicalmore » properties. At the outset of this project, we believed that such a route is the best to improve mechanical properties. We have applied Design of Experiment (DOE) techniques to optimize formulations including both silica aerogels and organically modified silica aerogels (''Ormosils''). We used these DOE results to optimize formulations around the local/global optimization points. This report documents that we succeeded in developing a number of formulations that meet all of the stated criteria. We successfully developed formulations utilizing a two-step approach where the first step involves acid catalyzed hydrolysis and the second step involves base catalyzed condensation to make the gels. The gels were dried using supercritical CO{sub 2} and we were able to make 1 foot x 1 foot x 0.5 inch panels that met the criteria established.« less

  17. 17. Photocopy of drawing (original 8 x 101/2 inch plate ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Photocopy of drawing (original 8 x 10-1/2 inch plate located in: USDA Forest Service, North Pacific Region, recreation handbook, date unknown). COMMUNITY BLDG., PLATE A-9 (enlarged from a 4x5 negative) - Austin Pass Warming Hut, Washington Highway 542, Glacier, Whatcom County, WA

  18. View of a five inch standard Mark III model 1 ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of a five inch standard Mark III model 1 #39, manufactured in 1916 at the naval gun factory waterveliet, NY; this is the only gun remaining on olympia dating from the period when it was in commission; note ammunition lift at left side of photograph. (p36) - USS Olympia, Penn's Landing, 211 South Columbus Boulevard, Philadelphia, Philadelphia County, PA

  19. 62. SIXTEEN INCH GUN MOUNTED ON THE MACHINING LATHE; LOOKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. SIXTEEN INCH GUN MOUNTED ON THE MACHINING LATHE; LOOKING WSW. THE GUN ITSELF EXTENDS BEYOND THE BRICK ARCHES OF THE MAIN SHOP FLOOR'S W WALL AND INTO THE W AISLE. THE LATHE'S CUTTING HEAD CAN BE SEEN AT THE RIGHT CENTER OF THE VIEW. (Ryan) - Watervliet Arsenal, Building No. 110, Hagner Road between Schull & Whittemore Roads, Watervliet, Albany County, NY

  20. Worcester 1 Inch Solenoid Actuated Gas Operated SCHe System Valves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MISKA, C.R.

    1 inch gas-operated full-port ball valves incorporate a solenoid and limit switches as integral parts of the actuator. These valves are normally open and fail safe to the open position (GOV-1*02 and 1*06 fail closed) to provide a flow path of helium gas to the MCO under helium purge and off-normal conditions when the MCO is isolated.

  1. Worcester 1 Inch Solenoid Actuated Gas Operated SCHe System Valves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    VAN KATWIJK, C.

    1 inch Gas-operated full-port ball valves incorporate a solenoid and limit switches as integral parts of the actuator. These valves are normally open and fail safe to the open position (GOV-1*02 and 1*06 fall closed) to provide a flow path of helium gas to the MCO under helium purge and off-normal conditions when the MCO is isolated.

  2. Worcester 1 Inch Solenoid Actuated Gas Operated SCHe System Valves

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    VAN KATWIJK, C.

    1 inch Gas-operated full-port ball valves incorporate a solenoid and limit switches as integral parts of the actuator. These valves are normally open and fail safe to the open position (GOV-1*02 and 1*06 fail closed) to provide a flow path of helium gas to the MCO under helium purge and off-normal conditions when the MCO is isolated.

  3. Health physics challenges involved with opening a "seventeen-inch" concrete waste vault.

    PubMed

    Sullivan, Patrick T; Pizzulli, Michelle

    2005-05-01

    This paper describes the various activities involved with opening a sealed legacy "Seventeen-inch" concrete vault and the health physics challenges and solutions employed. As part of a legacy waste stream that was removed from the former Hazardous Waste Management Facility at Brookhaven National Laboratory, the "Seventeen-inch" concrete vault labeled 1-95 was moved to the new Waste Management Facility for ultimate disposal. Because the vault contained 239Pu foils with a total activity in excess of the transuranic waste limits, the foils needed to be removed and repackaged for disposal. Conventional diamond wire saws could not be used because of facility constraints, so this project relied mainly on manual techniques. The planning and engineering controls put in place enabled personnel to open the vault and remove the waste while keeping dose as low as reasonably achievable.

  4. 6. July, 1947 Photocopy of photograph (11/4 x 27/16 inch ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. July, 1947 Photocopy of photograph (1-1/4 x 2-7/16 inch print, on file, Coronado N. F. Supervisor's Office, Tucson) COLUMBINE R. S. BARN-GARAGE. - Columbine Ranger Station, Garage, Milepost 1343, State Highway 366, Safford, Graham County, AZ

  5. View forward of five inch gun mounted in sponson; note ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View forward of five inch gun mounted in sponson; note glass windows which would be removed in combat, gudgeons below window allowed attachment of armor plate which could be swung up to protect gun crew in battle; also note lower section of flag rack at top left center of photograph. (p39) - USS Olympia, Penn's Landing, 211 South Columbus Boulevard, Philadelphia, Philadelphia County, PA

  6. The 13-inch magnetic suspension and balance system wind tunnel

    NASA Technical Reports Server (NTRS)

    Johnson, William G., Jr.; Dress, David A.

    1989-01-01

    NASA Langley has a small, subsonic wind tunnel in use with the 13-inch Magnetic Suspension and Balance System (MSBS). The tunnel is capable of speeds up to Mach 0.5. This report presents tunnel design and construction details. It includes flow uniformity, angularity, and velocity fluctuation data. It also compares experimental Mach number distribution data with computed results for the General Electric Streamtube Curvature Program.

  7. Radar Shows Italy Area Moved 8 Inches by Amatrice Earthquake

    NASA Image and Video Library

    2016-08-27

    NASA and its partners are contributing observations and expertise to the ongoing response to the Aug. 23, 2016, magnitude 6.2 Amatrice earthquake in central Italy caused widespread building damage to several towns throughout the region. This earthquake was the strongest in that area since the 2009 earthquake that destroyed the city of L'Aquila. Scientists with the Advanced Rapid Imaging and Analysis project (ARIA), a collaboration between NASA's Jet Propulsion Laboratory, Pasadena, California, and the California Institute of Technology in Pasadena, analyzed interferometric synthetic aperture radar images from the PALSAR-2 instrument on the ALOS-2 satellite operated by the Japan Aerospace Exploration Agency (JAXA) to calculate a map of the deformation of Earth's surface caused by the quake. This false-color map shows the amount of permanent surface movement, as viewed by the satellite, during a seven-month interval between two ALOS-2 images acquired on Sept. 9, 2015 and Aug. 24, 2016. The movement was caused almost entirely by the earthquake. In this map, the colors of the surface displacements are proportional to the surface motion. The red and pink tones show the areas where the land moved toward the satellite by up to 2 inches (5 centimeters). The area with various shades of blue moved away from the satellite, mostly downward, by as much as 8 inches (20 centimeters). Contours on the surface motion are 2 inches (5 centimeters) The green star shows the epicenter where the earthquake started as located by the U.S. Geological Survey National Earthquake Information Center. Black dots show town locations. Scientists use these maps to build detailed models of the fault slip at depth and associated land movements to better understand the impact on future earthquake activity. The map shows the fault or faults that moved in the earthquake is about 14 miles (22 kilometers) long between Amatrice and Norcia and slopes to the west beneath the area that moved downward. The

  8. The 8 1/4-inch Clark refractor of the Temple Observatory, Rugby

    NASA Astrophysics Data System (ADS)

    Marriott, R. A.

    1991-12-01

    During the 1850s W. R. Dawes purchased five object glasses from the American opticians Alvan Clark and Sons. The only one to have been in continuous use since then was the last of them, in a complete 8 1/4-inch refractor.

  9. Elemental Water Impact Test: Phase 1 20-Inch Hemisphere

    NASA Technical Reports Server (NTRS)

    Vassilakos, Gregory J.

    2015-01-01

    Spacecraft are being designed based on LS-DYNA simulations of water landing impacts. The Elemental Water Impact Test (EWIT) series was undertaken to assess the accuracy of LS-DYNA water impact simulations. Phase 1 of the EWIT series featured water impact tests of a 20-inch hemisphere dropped from heights of 5 feet and 10 feet. The hemisphere was outfitted with an accelerometer and three pressure gages. The focus of this report is the correlation of analytical models against test data.

  10. The Development of an 8-inch by 8-inch Slotted Tunnel for Mach Numbers up to 1.28

    NASA Technical Reports Server (NTRS)

    Little, B. H., Jr.; Cubbage, James J., Jr.

    1961-01-01

    An 8-inch by 8-inch transonic tunnel model with test section slotted on two opposite walls was constructed in which particular emphasis -was given to the development of slot geometry, slot-flow reentry section, and short-diffuser configurations for good test-region flow and minimum total-pressure losses. Center-line static pressures through the test section, wall static pressures through the other parts of the tunnel, and total-pressure distributions at the inlet and exit stations of the diffuser were measured- With a slot length equal to two tunnel heights and 1/14 open-area-ratio slotted walls) a test region one tunnel height in length was obtained in which the deviation from the mean Mach number was less than +/- 0.01 up to Mach number 1.15. With 1/7 open-area-ratio slotted walls, a test region 0.84 tunnel heights in length with deviation less than +/- O.01 was obtained up to Mach number 1.26. Increasing the tunnel diffuser angle from 6.4 to 10 deg. increased pressure loss through the tunnel at Mach number 1.20 from 15 percent to 20 percent of the total pressure. The use of other diffusers with equivalent angles of 10 deg. but contoured so that the initial diffusion angle was less than 10 deg. and the final angle was 200 reduced the losses to as low as 16 percent. A method for changing the test-section Mach number rapidly by controlling the flow through a bypass line from the tunnel settling chamber to the slot-flow plenum chamber of the test section was very effective. The test-section Mach number was reduced approximately 5 percent in 1/8 second by bleeding into the test section a flow of air equal to 2 percent of the mainstream flow and 30 percent in 1/4 second with bleed flow equal to 10 percent of the mainstream flow. The rate of reduction was largely determined by the opening rate of the bleed-flow-control valve.

  11. Overview of 10 inch Diameter HTPB Hybrid Motor Testing with Liquid Oxygen at Stennis Space Center

    NASA Technical Reports Server (NTRS)

    Knowles, Timothy E.; Kearney, Darren; Roberts, Ryan

    2005-01-01

    To further explore the operation of hybrid rocket motors and to demonstrate the performance characteristics of the motor design Lockheed Martin funded research on a series of 10 inch diameter hybrid motors that produce less than 10 klbf sea level thrust. This test series was given the name "Hybrid Technology Test Program." These motors were fired in the existing test stand at the SSC E-3 complex Cell 1. The fuel and oxidizer for these 10 inch diameter motors are HTPB and LO2, respectively. The original goal of the testing was to verify that the predicted performance matched the actual performance of these 10 inch motors (ref. figure 1) and then confirm that the motors performed acceptably. For this element of testing horizontally fired hybrid motors will be tested using LO2 supplied from the existing facility 100 gallon LO2 tank that is pressurized with facility GN2. The thrust produced by the motor will be measured by a Lockheed Martin supplied load cell.

  12. MLEP-Fail calibration for 1/8 inch thick cast plate of 17-4 steel.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Corona, Edmundo

    The purpose of the work presented in this memo was to calibrate the Sierra material model Multilinear Elastic-Plastic Hardening Model with Failure (MLEP-Fail) for 1/8 inch thick cast plate of 17-4 steel. The calibration approach is essentially the same as that recently used in a previous memo using data from smooth and notched tensile specimens. The notched specimens were manufactured with three notch radii R = 1=8, 1/32 and 1/64 inches. The dimensions of the smooth and notched specimens are given in the prints in Appendix A. Two cast plates, Plate 3 and Plate 4, with nominally identical properties weremore » considered.« less

  13. Continuous tunnel kiln direct-fired with bark to dry 1.75-inch southern pine in 12 hours.

    Treesearch

    P. Koch; W.L. Wellford

    1977-01-01

    Length-sorted lumber is surfaced on one side to 1.75-inch thickness, mechanically stacked 5 feet wide and 10 feet high on 1-1/4-inch-thick sticks, and continuously transported through a zone-controlled tunnel kiln at 8 ft./hr. to yield 500,000 fbm of lumber dried to 9 percent average MC per 168-hour week. In the tunnel, the lumber is dried for 8 (possibly 10) hours at...

  14. Continuous tunnel kiln direct-fired with bark to dry 1.75-inch southern pine in 12 hours

    Treesearch

    Peter Koch; Walker L. Wellford

    1976-01-01

    Length-sorted lumber is surfaced on one side to 1.75-inch thickness, mechanically stacked 5 feet wide and 10 feet high on 1-1/4-inch-thick sticks, and continuously transported through a zone-controlled tunnel kiln at 8 ft./hr. to yield 500,000 fbm of lumber dried to 9 percent average MC per 168-hour week. In the tunnel, the lumber is dried for 8 (possibly 10) hours of...

  15. A user's guide to the Langley 16- by 24-inch water tunnel

    NASA Technical Reports Server (NTRS)

    Pendergraft, Odis C., Jr.; Neuhart, Dan H.; Kariya, Timmy T.

    1992-01-01

    The Langley 16 x 24 inch Water Tunnel is described in detail, along with all the supporting equipment used in its operation as a flow visualization test facility. These include the laser and incandescent lighting systems; and the photographic, video, and laser fluorescence anemometer systems used to make permanent records of the test results. This facility is a closed return water tunnel capable of test section velocities from 0 to 0.75 feet per second with flow through the 16 x 24 inch test section in a downward (vertical) direction. The velocity normally used for testing is 0.25 feet per second where the most uniform flow occurs, and is slow enough to easily observe flow phenomena such as vortex flow with the unaided eye. An overview is given of the operational characteristics, procedures, and capabilities of the water tunnel to potential users of the facility so that they may determine if the facility meets their needs for a planned study.

  16. The 48-inch lidar aerosol measurements taken at the Langley Research Center

    NASA Technical Reports Server (NTRS)

    Woods, David C.; Osborn, M. T.; Winker, D. M.; Decoursey, R. J.; Youngbluth, Otto, Jr.

    1994-01-01

    This report presents lidar data taken between July 1991 and December 1992 using a ground-based 48-inch lidar instrument at the Langley Research Center in Hampton, Virginia. Seventy lidar profiles (approximately one per week) were obtained during this period, which began less than 1 month after the eruption of the Mount Pinatubo volcano in the Philippines. Plots of backscattering ratio as a function of altitude are presented for each data set along with tables containing numerical values of the backscattering ratio and backscattering coefficient versus altitude. The enhanced aerosol backscattering seen in the profiles highlights the influence of the Mount Pinatubo eruption on the stratospheric aerosol loading over Hampton. The long-term record of the profiles gives a picture of the evolution of the aerosol cloud, which reached maximum loading approximately 8 months after the eruption and then started to decrease gradually. NASA RP-1209 discusses 48-inch lidar aerosol measurements taken at the Langley Research Center from May 1974 to December 1987.

  17. DEVELOPMENT OF A NINE INCH DIAMETER, MACH 5.5, MONORAIL, ROCKET SLED.

    DTIC Science & Technology

    A nine inch diameter monorail rocket sled was designed, fabricated and tested at Holloman Air Force Base. The vehicle was designed to allow easy...replacement of appendages which were subject to severe aerodynamic heating and/or high wear rates. The monorail vehicle as described was shown to be

  18. Characterization of the ETEL and HZC 3-inch PMTs for the KM3NeT project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bormuth, R.; Samtleben, D.; Classen, L., E-mail: kalekin@physik.uni-erlangen.de

    2014-11-18

    The KM3NeT collaboration constructs a multi-cubic-kilometer scale neutrino telescope in the Mediterranean Sea. The telescope’s detection units, deployed in the deep sea, will be instrumented with facet like Digital Optical Modules (DOMs), each housing 31 three-inch photomultiplier tubes (PMTs) and readout electronics inside of 17-inch pressure resistant glass sphere. Two companies, ET Enterprises Ltd (ETEL) from UK and HZC from China developed new 3-inch PMTs to meet KM3NeT requirements. 126 PMTs of types D783KFLA, D792KFLA, and D793KFLA from ETEL and 7 PMTs of type XP53 from HZC have been delivered to KM3NeT and tested by the KM3NeT groups of NIKHEF-Amsterdammore » and ECAP-Erlangen. Tests have been performed to measure the main PMT parameters listed in the KM3NeT specifications, such as gain, transit time spread, dark rate, fraction of spurious pulses, and quantum efficiency. Methods and results are presented in this report.« less

  19. 16. Photocopy of photograph (original 51/2 x 31/4 inch print ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. Photocopy of photograph (original 5-1/2 x 3-1/4 inch print located in the Recreation files, Mt. Baker-Snoqualmie N. F.). R. L. Fromme, photographer, 1941 INTERIOR OF MAIN ROOM, AUSTIN PASS SKI SHELTER. MT. BAKER NATIONAL FOREST. - Austin Pass Warming Hut, Washington Highway 542, Glacier, Whatcom County, WA

  20. MSTB 2 x 6-Inch Low Speed Tunnel Turbulence Generator Grid/Honeycomb PIV Measurements and Analysis

    NASA Technical Reports Server (NTRS)

    Blackshire, James L.

    1997-01-01

    An assessment of the turbulence levels present in the Measurement Science and Technology (MSTB) branch's 2 x 6-inch low speed wind tunnel was made using Particle Image Velocimetry (PIV), and a turbulence generator consisting of a grid/honeycomb structure. Approximately 3000 digital PIV images were captured and analyzed covering an approximate 2 x 6-inch area along the centerline of the tunnel just beyond the turbulence generator system. Custom software for analysis and acquisition was developed for semi-automated digital PIV image acquisition and analysis. Comparisons between previously obtained LTA and LV turbulence measurements taken in the tunnel are presented.

  1. High-performance 4x4-inch AMLCD for avionic applications

    NASA Astrophysics Data System (ADS)

    Syroid, Daniel D.; Hansen, Glenn A.; Boling, Ed

    1996-05-01

    There is a need for high performance flat panel displays to replace and upgrade the electromechanical flight indicators and CRT based displays used in the cockpits of many older aircraft that are in active service today. The need for replacement of these older generation instruments is well known in the industry and was discussed in a previous paper by Duane Grave of Rockwell Collins. Furthermore, because of the limited activity in new aircraft development today, the need to upgrade existing aircraft avionics is accelerating. Many of the electromechanical instruments currently provide flight indications to the pilot and include horizontal situation (HSI) and attitude director indicators (ADI). These instruments are used on both military and commercial aircraft. The indicators are typically housed in a 5ATI case that slides into a 5 inch square opening in the cockpit. Image Quest has developed a 4 by 4 inch active area, flight quality, high resolution, full color, high luminance, wide temperature range display module based on active matrix liquid crystal display (AMLCD) technology that has excellent contrast in full sunlight. The display module is well suited for use in electronic instruments to replace or upgrade the electro-mechanical 5ATI flight indicators. THe AMLCD based display offers greatly improved display format flexibility, operating reliability and display contrast in all ambient lighting conditions as well as significant short and long term cost of ownership advantages.

  2. 15. Photocopy of photograph (original 43/4 x 33/4 inch print ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    15. Photocopy of photograph (original 4-3/4 x 3-3/4 inch print located in the Recreation files, Mt. Baker-Snoqualmie N. F.). Photographer unknown, ca. 1941 SKI WARMING HUT, AUSTIN PASS, GLACIER DISTRICT. (NOTE PLANK SPANNING GAP BETWEEN KNOLL AND PORCH) - Austin Pass Warming Hut, Washington Highway 542, Glacier, Whatcom County, WA

  3. Another step towards photodetector innovation: The first 1-inch industrial VSiPMT

    NASA Astrophysics Data System (ADS)

    Barbarino, G.; Barbato, F. C. T.; Mollo, C. M.; Nocerino, E.; Vivolo, D.; Fukasawa, A.

    2018-09-01

    The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an original design for an innovative light detector we proposed with the aim to create new scientific instrumentation for future missions of exploration and observation of the universe. The idea behind this device is to replace the classical dynode chain of a photomultiplier tube with a silicon photomultiplier, the latter acting as an electron detector and amplifier. In this way we obtain a large area photodetector with an excellent photon counting, proper of the SiPMs, but with the dark noise of only one SiPM (1-inch is equivalent to ∼ 54 SiPM 3 × 3 mm2). From this point of view, the VSiPMT offers very attractive features and unprecedented performance in large area detection, such as: negligible power consumption, excellent SPE resolution, easy low-voltage-based stabilization and very good time performance. Hamamatsu realized for our group a 1-inch prototype. The results of the full characterization of the device are presented in this work.

  4. 6. Photocopy of photograph (original 53/4 x 31/2 inch negative ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Photocopy of photograph (original 5-3/4 x 3-1/2 inch negative located in the Recreation files, Darrington Ranger District). R. L. Fromme, photographer, July 1942. FIRE & TRUCK STORAGE ('L') BLDG. 2275, FOREGROUND - R. & T. WAREHOUSE, DARRINGTON R.S. ('M') BLDG. 2215, BACKGROUND - Darrington Ranger Station, Fire & Truck Storage Building, 1405 Emmens Street, Darrington, Snohomish County, WA

  5. Design and analysis report for the flight weight 20-inch Columbium secondary nozzle for the RL10 engine

    NASA Technical Reports Server (NTRS)

    Castro, J. H.

    1989-01-01

    Pratt & Whitney (P and W) is currently under contract to NASA-LeRC for a multi-year program to evaluate the feasibility of the RL10-IIB/IIC engine models and the various improvements which broaden the engine capabilities and range of applications. The features being evaluated include the operation of the RL10 engine at low thrust levels and/or high mixture ratio levels and the addition of a high area ratio (250:1) translating nozzle to the engine to increase its specific impulse while shortening the installed engine length. The translating nozzle for the RL10-IIB/IIC engine is approximately 55 inches long with an exit plane diameter of 71 inches and an inlet plane diameter of 40 inches. This report documents the design and analysis work done investigating a small subscale Columbium nozzle which could be built and tested to provide findings which then could be incorporated into the high area ratio nozzle final design for the RL10-IIB/IIC engine. This report documents the design and analysis work done investigating a small subscale Columbium nozzle which could be built and tested to provide findings which then could be incorporated into the high area ratio nozzle final design for the RL10-IIB/IIC engine. The length of the subscale nozzle is 20 in.; its exit diameter is 46 in. With the nozzle in the stowed position, an RL10A-3-3A engine system is 70 inches long (Area Ratio = 61:1); with the nozzle deployed the engine length and area ratio are increased to 90 inches and 83:1 respectively. The increase in area ratio provides a calculated increase of 7 + or - 1 second of specific impulse.

  6. User guide for the digital control system of the NASA/Langley Research Center's 13-inch Magnetic Suspension and Balance System

    NASA Technical Reports Server (NTRS)

    Britcher, Colin P.

    1987-01-01

    The technical background to the development of the digital control system of the NASA/Langley Research Center's 13 inch Magnetic Supension and Balance Systen (MSBS) is reviewed. The implementation of traditional MSBS control algorithms in digital form is examined. Extensive details of the 13-inch MSBS digital controller and related hardware are given, together with the introductory instructions for systems operators. Full listings of software are included in the Appendices.

  7. MASH test 3-11 on the 5-inch cast in place deck barrier anchors.

    DOT National Transportation Integrated Search

    2011-12-01

    A full-scale crash test was performed to evaluate the impact performance of a Texas T223 concrete : beam and post bridge rail anchored to a 5-inch cast-in-place deck (CIPD). The testing followed the MASH : standards for Test Level 3 (TL-3) longitudin...

  8. 28. 12INCH VERTICAL PUG MILL, MANUFACTURED BY THE CROSSLEY MANUFACTURING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    28. 12-INCH VERTICAL PUG MILL, MANUFACTURED BY THE CROSSLEY MANUFACTURING CO. OF TRENTON, NJ. IT WAS PURCHASED IN 1902, AND USED AT THE FIRST MORAVIAN POTTERY AND TILE WORKS BEFORE BEING MOVED TO IS PRESENT LOCATION IN 1912. AFTER THE PURCHASE OF THE BRICK AUGER, IT WAS PROBABLY USED TO MIX PIGMENT INTO BUFF CLAY TO PRODUCE COLORED-BODIED CLAYS. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  9. The 6-foot-4-inch Wind Tunnel at the Washington Navy Yard

    NASA Technical Reports Server (NTRS)

    Desmond, G L; Mccrary, J A

    1935-01-01

    The 6-foot-4-inch wind tunnel and its auxiliary equipment has proven itself capable of continuous and reliable output of data. The real value of the tunnel will increase as experience is gained in checking the observed tunnel performance against full-scale performance. Such has been the case of the 8- by 8-foot tunnel, and for that reason the comparison in the calibration tests have been presented.

  10. 14. Photocopy of photograph (original 43/4 x 33/4 inch print ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. Photocopy of photograph (original 4-3/4 x 3-3/4 inch print located in the Recreation files, Mt. Baker-Snoqualmie N. F.). Photographer unknown, ca. 1941 AUSTIN PASS SKI HUT (WITH BAGLEY LAKE BELOW) AT HEATHER MEADOWS RECREATION AREA. WIDE-CONED MOUNTAIN IN CENTER BACKGROUND IS MOUNT LARRABEE; CANADIAN RED MOUNTAIN IS PEAK TO LEFT. GLACIER DISTRICT. - Austin Pass Warming Hut, Washington Highway 542, Glacier, Whatcom County, WA

  11. STS-27 Atlantis, OV-104, crewmembers repair 3/4 inch video reel on middeck

    NASA Image and Video Library

    1988-12-06

    STS027-05-020 (2-6 Dec. 1988) --- In the foreground, astronauts Robert L. Gibson (left) and Guy S. Gardner, commander and pilot, respectively, for the STS-27 mission, repair a 3/4-inch video reel on the middeck of the Earth-orbiting space shuttle Atlantis. Photo credit: NASA

  12. High-tech breakthrough DNA scanner for reading sequence and detecting gene mutation: A powerful 1 lb, 20 {mu}m resolution, 16-bit personal scanner (PS) that scans 17inch x 14inch x-ray film in 48 s, with laser, uv and white light sources

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zeineh, J.A.; Zeineh, M.M.; Zeineh, R.A.

    1993-06-01

    The 17inch x 14inch X-ray film, gels, and blots are widely used in DNA research. However, DNA laser scanners are costly and unaffordable for the majority of surveyed biotech scientists who need it. The high-tech breakthrough analytical personal scanner (PS) presented in this report is an inexpensive 1 lb hand-held scanner priced at 2-4% of the bulky and costly 30-95 lb conventional laser scanners. This PS scanner is affordable from an operation budget and biotechnologists, who originate most science breakthroughs, can acquire it to enhance their speed, accuracy, and productivity. Compared to conventional laser scanners that are currently available onlymore » through hard-to-get capital-equipment budgets, the new PS scanner offers improved spatial resolution of 20 {mu}m, higher speed (scan up to 17inch x 14inch molecular X-ray film in 48 s), 1-32,768 gray levels (16-bits), student routines, versatility, and, most important, affordability. Its programs image the film, read DNA sequences automatically, and detect gene mutation. In parallel to the wide laboratory use of PC computers instead of mainframes, this PS scanner might become an integral part of a PC-PS powerful and cost-effective system where the PS performs the digital imaging and the PC acts on the data.« less

  13. Data book for 12.5-inch diameter SRB thermal model water flotation test - 14.7 psia, series P024

    NASA Technical Reports Server (NTRS)

    Allums, S. L.

    1974-01-01

    Tests were conducted to determine how thermal conditions affect space shuttle solid rocket booster (SRB) flotation. Acceleration, pressure, and temperature data were recorded from initial water impact to final flotation position using a 12.5-inch diameter thermal model of the SRB at ambient pressure. The model was 136.9 inches long and weighed 117.3 lbm. The tests indicated the following differences from ambient temperature tests: (1) significant negative static pressures can occur during penetration; (2) maximum penetration is increased; and (3) final flotation is in the spar buoy mode.

  14. Optimizing Facility Configurations and Operating Conditions for Improved Performance in the NASA Ames 24 Inch Shock Tube

    NASA Technical Reports Server (NTRS)

    Bogdanoff, David W.; Cruden, Brett A.

    2016-01-01

    The Ames Electric Arc Shock Tube (EAST) is a shock tube wherein the driver gas can be heated by an electric arc discharge. The electrical energy is stored in a 1.2 MJ capacitor bank. Four inch and 24 inch diameter driven tubes are available. The facility is described and the need for testing in the 24 inch tube to better simulate low density NASA mission profiles is discussed. Three test entries, 53, 53B and 59, are discussed. Tests are done with air or Mars gas (95.7% CO2/2.7% N2/1.6% Ar) at pressures of 0.01 to 0.14 Torr. Velocities spanned 6.3-9.2 km/s, with a nominal center of 7 km/s. Many facility configurations are studied in an effort to improve data quality. Various driver and driven tube configurations and the use of a buffer section between the driver and the driven tube are studied. Diagnostics include test times, time histories of the shock light pulses and tilts of the shock wave off the plane normal to the tube axis. The report will detail the results of the various trials, give the best configuration/operating conditions found to date and provide recommendations for further improvements. Finally, diaphragm performance is discussed.

  15. Planned development of a radioactive beam capability at the LBNL 88-inch cyclotron

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Haustein, P.E.; Moltz, D.M.; Norman, E.B.

    1997-12-31

    Planned development of low-Z, proton-rich, radioactive beams ({sup 11}C, {sup 13}N, {sup 14}, {sup 15}O, and {sup 18}F) at the 88 inch Cyclotron of the Lawrence Berkeley National Lab is described. Based on the {open_quotes}coupled cyclotron method{close_quotes}, isotopes produced by (p,n) and (p,a) reactions at a high-current (30 mA), low-energy (10 MeV) medical cyclotron will be transferred {approximately}300 meters by high-speed gas-jet transport to the ECR ion-source at the 88 inch Cyclotron. Important features of this approach are its low cost, use of simple and well tested technology, applicability to nearly all elements, and avoidance of lengthy (chemical or physical)more » isotopic release delays at the production target. Developmental progress is reported for various operational components. Based on conservative estimates, e.g. 1% ECR ion-yield, extracted radioactive ion beams are projected to exceed 10{sup 6} ions/sec. Experiments which will use these beams include studies of the scattering of mirror nuclei, single and mutual excitation in inelastic scattering and single nucleon transfer reactions.« less

  16. NO PLIF imaging in the CUBRC 48-inch shock tunnel

    NASA Astrophysics Data System (ADS)

    Jiang, N.; Bruzzese, J.; Patton, R.; Sutton, J.; Yentsch, R.; Gaitonde, D. V.; Lempert, W. R.; Miller, J. D.; Meyer, T. R.; Parker, R.; Wadham, T.; Holden, M.; Danehy, P. M.

    2012-12-01

    Nitric oxide planar laser-induced fluorescence (NO PLIF) imaging is demonstrated at a 10-kHz repetition rate in the Calspan University at Buffalo Research Center's (CUBRC) 48-inch Mach 9 hypervelocity shock tunnel using a pulse burst laser-based high frame rate imaging system. Sequences of up to ten images are obtained internal to a supersonic combustor model, located within the shock tunnel, during a single ~10-millisecond duration run of the ground test facility. Comparison with a CFD simulation shows good overall qualitative agreement in the jet penetration and spreading observed with an average of forty individual PLIF images obtained during several facility runs.

  17. 50 CFR Figure 12 to Part 223 - Escape Opening & Cover Dimensions for 71-inch TED

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Escape Opening & Cover Dimensions for 71-inch TED 12 Figure 12 to Part 223 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS THREATENED MARINE AND...

  18. 50 CFR Figure 12 to Part 223 - Escape Opening & Cover Dimensions for 71-inch TED

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 50 Wildlife and Fisheries 10 2012-10-01 2012-10-01 false Escape Opening & Cover Dimensions for 71-inch TED 12 Figure 12 to Part 223 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS THREATENED MARINE AND...

  19. Data book for 12.5-inch diameter SRB thermal model water flotation test: 14.7 psia, series P020

    NASA Technical Reports Server (NTRS)

    Allums, S. L.

    1974-01-01

    Data acquired from the initial series of tests conducted to determine how thermal conditions affect SRB (Space Shuttle Solid Rocket Booster) flotation are presented. Acceleration, pressure, and temperature data recorded from initial water impact to final flotation position using a 12.5-inch diameter thermal model of the SRB at ambient pressure are included. The model was 136.9 inches long and weighed 117.3 lbm. The tests indicated the following differences from ambient temperature tests: (1) significant negative static pressures can occur during penetration; (2) maximum penetration is increased; and (3) final flotation is in the spar buoy mode.

  20. KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers install the liquid oxygen feedline for the 17-inch disconnect on orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

    NASA Image and Video Library

    2003-11-11

    KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers install the liquid oxygen feedline for the 17-inch disconnect on orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

  1. Evaluation of a 15-inch widescreen OLED with sunlight-readable resistive touch panel

    NASA Astrophysics Data System (ADS)

    Hufnagel, Bruce D.; Tchon, Joseph L.; Bahadur, Birendra

    2012-06-01

    A commercially available 15-inch active-matrix organic light-emitting diode (AMOLED) television was modified to include a sunlight-readable resistive touch panel for technical evaluation with regard to a variety of rugged military and aerospace applications. By removing the circular polarizer (CP) from the AMOLED and relying on the touch panel's CP, the authors were able to minimize change in display luminance while adding touch capability and reducing reflectance.

  2. Optimization of Equipment and Techniques for Welding Aluminum in the Thickness Range of About 1/16 to 1/4 Inch

    DTIC Science & Technology

    1975-09-29

    no D AD-AO16 837 OPTIMIZATION OF EQUIPMENT AND TECHNIQUES FOR WELDING ALUMINUM IN THE THICKNESS RANGE OF ABOUT 1/16 TO 1/4 INCH Richard K. Sager, et...TECHNIQUES FOR WELDING ALUMINUM IN THE THICKNESS RANGE OF ABOUT 6~ TO ’i INCH by Richard K Sager Paul B Dickerson James E Grant Walter R Reichelt Maurice C...SharpMByron Shurnaker 0 Contract No N0024-74-C 5502 *,j Issued by NAVAL SEA SYSTEM COMMAND Project Serial No SF 541-702 Task 17016 FINAL REPORT Richard

  3. Spectroscopic classification of PS17chm with Double Spectrograph on Palomar 200-inch telescope

    NASA Astrophysics Data System (ADS)

    Blagorodnova, N.; Kupfer, T.; Burdge, K.; Kasliwal, M.; Adams, S.

    2017-04-01

    We report the classification of PS17chm, discovered by the by the Pan-STARRS Survey for Transients (see Chambers et al. 2016, arXiv:1612.05560, and http://pswww.ifa.hawaii.edu ). The observations were performed on UT 2017-04-19 with the Double Spectrograph (DBSP; range 350-1000nm, spectral resolution R 4000) on Palomar 200-inch (P200) telescope.

  4. Aerodynamic characteristics of a 0.00563 scale 142-inch diameter solid rocket booster (MSFC model 449 and 480) with side mounted stings in the NASA/MSFC 14-inch trisonic wind tunnel (SA14FA)

    NASA Technical Reports Server (NTRS)

    Ramsey, P. E.

    1976-01-01

    An experimental investigation (SA14FA, TWT 620) was conducted in the MSFC 14-inch Trisonic Wind Tunnel (TWT) to determine the entry static stability of a 0.00563 scale shuttle solid rocket booster (SRB). The primary objective was to determine the effects of four side mounted sting configurations and to improve the definition of the aerodynamic characteristics in the vicinity of the SRB entry trim point. Data were obtained for two 60 and two 90 degree side mounted stings and a straight nose mounted sting. The angle of attack range for the side-mounted stings was 100 to 170 degrees while that for the nose mounted sting was 150 to 170 degrees. The Mach number range consisted of 0.6 to 3.48. Except for the aft attach ring, no protuberances were considered and the side slip and roll angles were zero. The test model was scaled from the 142-inch diameter SRB known as configuration 139 which was used during test TWT 572 (SA5F).

  5. KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility insert the liquid oxygen feedline for the 17-inch disconnect in the orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

    NASA Image and Video Library

    2003-11-11

    KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility insert the liquid oxygen feedline for the 17-inch disconnect in the orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

  6. KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers raise the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

    NASA Image and Video Library

    2003-11-11

    KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers raise the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

  7. KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers lift the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

    NASA Image and Video Library

    2003-11-11

    KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers lift the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

  8. KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers move the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

    NASA Image and Video Library

    2003-11-11

    KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers move the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

  9. 50 CFR Figure 12 to Part 223 - Escape Opening & Cover Dimensions for 71-inch TED

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Escape Opening & Cover Dimensions for 71-inch TED 12 Figure 12 to Part 223 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS THREATENED MARINE AND ANADROMOUS SPECIES Pt. 223, Fig. 12 Figure 12 to...

  10. Elemental Water Impact Test: Phase 2 36-Inch Aluminum Tank Head

    NASA Technical Reports Server (NTRS)

    Vassilakos, Gregory J.

    2014-01-01

    Spacecraft are being designed based on LS-DYNA simulations of water landing impacts. The Elemental Water Impact Test (EWIT) series was undertaken to assess the accuracy of LS-DYNA water impact simulations. EWIT Phase 2 featured a 36-inch aluminum tank head. The tank head was outfitted with one accelerometer, twelve pressure transducers, three string potentiometers, and four strain gages. The tank head was dropped from heights of 1 foot and 2 feet. The focus of this report is the correlation of analytical models against test data. As a measure of prediction accuracy, peak responses from the baseline LS-DYNA model were compared to peak responses from the tests.

  11. SpUpNIC (Spectrograph Upgrade: Newly Improved Cassegrain) on the South African Astronomical Observatory's 74-inch telescope

    NASA Astrophysics Data System (ADS)

    Crause, Lisa A.; Carter, Dave; Daniels, Alroy; Evans, Geoff; Fourie, Piet; Gilbank, David; Hendricks, Malcolm; Koorts, Willie; Lategan, Deon; Loubser, Egan; Mouries, Sharon; O'Connor, James E.; O'Donoghue, Darragh E.; Potter, Stephen; Sass, Craig; Sickafoose, Amanda A.; Stoffels, John; Swanevelder, Pieter; Titus, Keegan; van Gend, Carel; Visser, Martin; Worters, Hannah L.

    2016-08-01

    SpUpNIC (Spectrograph Upgrade: Newly Improved Cassegrain) is the extensively upgraded Cassegrain Spectrograph on the South African Astronomical Observatory's 74-inch (1.9-m) telescope. The inverse-Cassegrain collimator mirrors and woefully inefficient Maksutov-Cassegrain camera optics have been replaced, along with the CCD and SDSU controller. All moving mechanisms are now governed by a programmable logic controller, allowing remote configuration of the instrument via an intuitive new graphical user interface. The new collimator produces a larger beam to match the optically faster Folded-Schmidt camera design and nine surface-relief diffraction gratings offer various wavelength ranges and resolutions across the optical domain. The new camera optics (a fused silica Schmidt plate, a slotted fold flat and a spherically figured primary mirror, both Zerodur, and a fused silica field-flattener lens forming the cryostat window) reduce the camera's central obscuration to increase the instrument throughput. The physically larger and more sensitive CCD extends the available wavelength range; weak arc lines are now detectable down to 325 nm and the red end extends beyond one micron. A rear-of-slit viewing camera has streamlined the observing process by enabling accurate target placement on the slit and facilitating telescope focus optimisation. An interactive quick-look data reduction tool further enhances the user-friendliness of SpUpNI

  12. Testing of the 15-inch air-sparged hydrocyclone for fine coal flotation at the Homer City preparation plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Miller, J.D.; Yi, Y.; Gopalakrishnan, S.

    1993-12-31

    Previous plant testing had been limited to the processing of minus 100 mesh classifier overflow (Upper Freeport Coal {approximately} 20% ash) with the 6-inch air-sparged hydrocyclone (ASH-6C) as reported at Coal Prep 92. The ASH-6C unit was found to provide separation efficiencies equivalent, or superior, to separations with the ASH-2C system. During the summer of 1992 the construction of the first 15-inch air-sparged hydrocyclone prototype was completed by the Advanced Processing Technologies, Inc. Installation at the Homer City Coal Preparation Plant was accomplished and testing began in October 1992. The ASH-15C unit can operate at a flowrate as high asmore » 1,000 gpm. Experimental results are reported with respect to capacity, combustible recovery and clean coal quality.« less

  13. Development of a 3/4-inch minus base course type a specification for Montana : project summary report.

    DOT National Transportation Integrated Search

    2016-12-01

    The primary objective of this project was to develop a standard specification for a new gravel base course with a nominal maximum aggregate size of in. This objective was met by analyzing two specific aspects of the -inch minus gradations: 1. Wh...

  14. Re-aluminising the primary mirror of the South African Astronomical Observatory's 74-inch telescope

    NASA Astrophysics Data System (ADS)

    Crause, Lisa A.; Stoffels, John; Koorts, Willie; Christian, Brendt; de Water, Wilhelmina; Fransman, Timothy; Gibbons, Denville; Machete, Nelson; Sefako, Ramotholo R.; Taaibos, Sinethemba

    2016-07-01

    Telescope mirrors reside in harsh environments and thus require periodic re-aluminisation to maintain their reflectivity. The SAAO's Sutherland field station suffers from dust and frequent bouts of high humidity. Dust settling on the mirrors adheres to the upward-facing optical surfaces and is not removed by CO2 cleaning. The 74-inch primary mirror was unsuccessfully re-aluminised in April 2015. Parts of the mirror proved difficult to clean and the resulting coating included hazy, white patches in those problem areas. Cotton wool soaked with ferric chloride was used to strip small patches of coating, confirming that no optical surface damage had occurred. The 55 year-old aluminising equipment for the 74-inch required an extensive overhaul and the spruced up system was then used to re-coat the primary mirror in November 2015. We used the same de-ionised water, potassium hydroxide, sodium lauryl sulphate, cotton wool, safety gear and cleaning techniques employed by the mirror coating team at the neighbouring Southern African Large Telescope, as well as their Ocean Optics reflectometer to quantify the improvement in reflectivity. Measurements at 320 nm on different parts of the dirty primary ranged between 10 % and 70 %, while the new coating exceeded 95 % over the entire surface.

  15. NO PLIF Imaging in the CUBRC 48 Inch Shock Tunnel

    NASA Technical Reports Server (NTRS)

    Jiang, N.; Bruzzese, J.; Patton, R.; Sutton J.; Lempert W.; Miller, J. D.; Meyer, T. R.; Parker, R.; Wadham, T.; Holden, M.; hide

    2011-01-01

    Nitric Oxide Planar Laser-Induced Fluorescence (NO PLIF) imaging is demonstrated at a 10 kHz repetition rate in the Calspan-University at Buffalo Research Center s (CUBRC) 48-inch Mach 9 hypervelocity shock tunnel using a pulse burst laser-based high frame rate imaging system. Sequences of up to ten images are obtained internal to a supersonic combustor model, located within the shock tunnel, during a single approx.10-millisecond duration run of the ground test facility. This represents over an order of magnitude improvement in data rate from previous PLIF-based diagnostic approaches. Comparison with a preliminary CFD simulation shows good overall qualitative agreement between the prediction of the mean NO density field and the observed PLIF image intensity, averaged over forty individual images obtained during several facility runs.

  16. KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility oversee installation of the liquid oxygen feedline for the 17-inch disconnect on the orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

    NASA Image and Video Library

    2003-11-11

    KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility oversee installation of the liquid oxygen feedline for the 17-inch disconnect on the orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

  17. 4-inch sample recovery canisters, Test Model D series. Final report, September 1969--May 1970

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Goode, P.L.; Neff, G.W.

    1970-12-31

    Six tests were conducted on 4-Inch Test Model D Closures to develop an improved closure for the redesigned Sandia Recovery Canister (SRC). The first three closures tested used variations of the high explosive (HE) design used on the previous Model B (Second) Series (P64283). The last three units tested used variations of the HE design used in the Midi Mist Event SRC.

  18. Influence of Crack-Tip Configurations on the Fracture Response of 0.04-Inch Thick 2024-T3 Aluminum Alloy Sheet

    NASA Technical Reports Server (NTRS)

    Johnston, William M.; Newman, James C. (Technical Monitor)

    2002-01-01

    A series of fracture tests were conducted on Middle-crack tension M(T) and compact tension C(T) specimens to determine the effects of specimen type, specimen width, notch tip sharpness and buckling on the fracture behavior of cracked thin sheet (0.04 inch thick) 2024-T3 aluminum alloy material. A series of M(T) specimens were tested with three notch tip configurations: (1) a fatigue pre-cracked notch, (2) a 0.010-inch-diameter wire electrical discharge machined (EDM) notch, and (3) a EDM notch sharpened with a razor blade. The test procedures are discussed and the experimental results for failure stress, load vs. crack extension and the material stress-strain response are reported.

  19. A Cross-Dispersed Medium-Resolution Spectrograph for Appalachian State Univeristy's 32-inch Telescope

    NASA Astrophysics Data System (ADS)

    Kluttz, K. A.; Gray, R. O.

    2003-12-01

    We have designed and constructed an economical medium-resolution spectrograph to be used on the 32-inch telescope of Appalachian State University's Dark Sky Observatory (DSO). The primary function of this instrument will be to study shell and emission-line stars. However, we will also use this instrument for chemical abundance studies and radial velocities. The basic design is that of an Ebert spectrograph with a single 6-inch mirror acting as both the collimator and camera. The primary dispersion is accomplished by a reflection grating, and order separation is accomplished by a grism. The spectrograph has been designed so that three wavelength regions are simultaneously imaged on the CCD camera. When the Hα line is centered in the third order, Hβ and lines of Fe II multiplet 42 -- often enhanced in shell and emission-line stars -- appear in the fourth order and the fifth order contains both the Ca II K & H lines. To facilitate abundance measurements, a telluric-free region near 6400Å is available in the third order by tilting the main diffraction grating. Preliminary tests have shown that the resolution of the new spectrograph is 0.42Å in the third order (R ≈ 15,000). This relatively high resolution will allow studies to be conducted at DSO which have not previously been possible with the instrumentation currently in use. Several optical components for this spectrograph were purchased with grants from the Fund for Astrophysical Research and the University Research Council.

  20. Design of a variable area diffuser for a 15-inch Mach 6 open-jet tunnel

    NASA Technical Reports Server (NTRS)

    Loney, Norman W.

    1994-01-01

    The Langley 15-inch Mach 6 High Temperature Tunnel was recently converted from a Mach 10 Hypersonic Flow Apparatus. This conversion was effected to improve the capability of testing in Mach 6 air at relatively high reservoir temperatures not previously possible at Langley. Elevated temperatures allow the matching of the Mach numbers, Reynolds numbers, and ratio of wall-to-adiabatic-wall temperatures (TW/Taw) between this and the Langley 20-inch Mach 6 CF4 Tunnel. This ratio is also matched for Langley's 31-inch Mach 10 Tunnel and is an important parameter useful in the simulation of slender bodies such as National Aerospace Plane (NASP) configurations currently being studied. Having established the nozzle's operating characteristics, the decision was made to install another test section to provide model injection capability. This test section is an open-jet type, with an injection system capable of injecting a model from retracted position to nozzle centerline between 0.5 and 2 seconds. Preliminary calibrations with the new test section resulted in Tunnel blockage. This blockage phenomenon was eliminated when the conical center body in the diffuser was replaced. The issue then, is to provide a new and more efficient variable area diffuser configuration with the capability to withstand testing of larger models without sending the Tunnel into an unstart condition. Use of the 1-dimensional steady flow equation with due regard to friction and heat transfer was employed to estimate the required area ratios (exit area / throat area) in a variable area diffuser. Correlations between diffuser exit Mach number and area ratios, relative to the stagnation pressure ratios and diffuser inlet Mach number were derived. From these correlations, one can set upper and lower operating pressures and temperatures for a given diffuser throat area. In addition, they will provide appropriate input conditions for the full 3-dimensional computational fluid dynamics (CFD) code for further

  1. 5-inch-size liquid crystal flat panel display evaluation test by flight simulator

    NASA Astrophysics Data System (ADS)

    Kawahara, Hiroyasu; Watanabe, Akira; Wakairo, Kaoru; Udagawa, Tomoyuki; Kurihara, Yoichiro

    An evaluation test is conducted on the function, performance, and display format of a 5x5 inch flat panel display (FPD) in a flight simulator. The FPD utilizes a color liquid crystal panel that is compact and lightweight and has excellent visibility. The simulator evaluation test is carried out in sequence with the conventional takeoff and landing to altitude, and then conversion to STOL procedures for flight path and subsequent approach and landing. It is shown that the liquid crystal display could be employed as a satisfactory indicator for aircraft instrumentation.

  2. Project Waiver of American Iron and Steel Requirements to the Napa Sanitation District for 24-Inch Diameter Butterfly Valves

    EPA Pesticide Factsheets

    Waiver approval by EPA pursuant to the American Iron and Steel Requirements of the Clean Water Act Section 608 to the Napa Sanitation District in California for the purchase of 24-inch butterfly valves.

  3. Introduction of laser initiation for the 48-inch Advanced Solid Rocket Motor (ASRM) test motors at Marshall Space Flight Center (MSFC)

    NASA Technical Reports Server (NTRS)

    Zimmerman, Chris J.; Litzinger, Gerald E.

    1993-01-01

    The Advanced Solid Rocket Motor is a new design for the Space Shuttle Solid Rocket Booster. The new design will provide more thrust and more payload capability, as well as incorporating many design improvements in all facets of the design and manufacturing process. A 48-inch (diameter) test motor program is part of the ASRM development program. This program has multiple purposes for testing of propellent, insulation, nozzle characteristics, etc. An overview of the evolution of the 48-inch ASRM test motor ignition system which culminated with the implementation of a laser ignition system is presented. The laser system requirements, development, and operation configuration are reviewed in detail.

  4. Drag measurements on a laminar flow body of revolution in Langley's 13 inch magnetic suspension and balance system. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Dress, David A.

    1988-01-01

    Low-speed wind tunnel drag force measurements were taken on a laminar flow body of revolution free of support interference. This body was tested at zero incidence in the NASA Langley 13 inch Magnetic Suspension and Balance System (MSBS). The primary objective of these tests was to substantiate the drag force measuring capabilities of the 13 inch MSBS. A secondary objective was to obtain support interference free drag measurements on an axisymmetric body of interest. Both objectives were met. The drag force calibrations and wind-on repeatability data provide a means of assessing the drag force measuring capabilities of the 13 inch MSBS. The measured drag coefficients for this body are of interest to researchers actively involved in designing minimum drag fuselage shapes. Additional investigations included: the effects of fixing transition; the effects of fins installed in the tail; surface flow visualizations using both liquid crystals and oil flow; and base pressure measurements using a one-channel telemetry system. Two drag prediction codes were used to assess their usefulness in estimating overall body drag. These theoretical results did not compare well with the measured values because of the following: incorrect or non-existent modeling of a laminar separation bubble on the body and incorrect of non-existent estimates of base pressure drag.

  5. Development of an NCHRP report 350 TL-3 New Jersey shape 50-inch portable concrete barrier : executive summary report.

    DOT National Transportation Integrated Search

    2006-06-01

    The purpose of the project was to develop a : temporary portable concrete barrier (PCB) : with an integral glare shield for use in : roadside work-zone areas. Currentlyavailable : 32-inch portable concrete barriers : require the use of an add-on glar...

  6. The NASA Ames 16-Inch Shock Tunnel Nozzle Simulations and Experimental Comparison

    NASA Technical Reports Server (NTRS)

    TokarcikPolsky, S.; Papadopoulos, P.; Venkatapathy, E.; Delwert, G. S.; Edwards, Thomas A. (Technical Monitor)

    1995-01-01

    The 16-Inch Shock Tunnel at NASA Ames Research Center is a unique test facility used for hypersonic propulsion testing. To provide information necessary to understand the hypersonic testing of the combustor model, computational simulations of the facility nozzle were performed and results are compared with available experimental data, namely static pressure along the nozzle walls and pitot pressure at the exit of the nozzle section. Both quasi-one-dimensional and axisymmetric approaches were used to study the numerous modeling issues involved. The facility nozzle flow was examined for three hypersonic test conditions, and the computational results are presented in detail. The effects of variations in reservoir conditions, boundary layer growth, and parameters of numerical modeling are explored.

  7. Description and calibration of the Langley 6- by 19-inch transonic tunnel

    NASA Technical Reports Server (NTRS)

    Ladson, C. L.

    1973-01-01

    A description and calibration is presented of the Langley 6- by 19-inch transonic tunnel which is a two-dimensional facility with top and bottom slotted walls used for testing two-dimensional airfoil sections. Basic tunnel-empty Mach number distributions and schlieren flow photographs as well as integrated normal-force coefficients, pitching-moment coefficients, surface-pressure distributions, and schlieren flow photographs of an NACA 0012 airfoil calibration model are presented. The Mach number capability of the facility is from 0.5 to about 1.1 with a corresponding Reynolds number range of 1.5 million to 3 million based on a 4.0-in. model chord. Comparisons of experimental results from the tests with previous data are also presented.

  8. KENNEDY SPACE CENTER, FLA. - Viewed from inside the aft section of the orbiter Discovery, a worker installs the liquid oxygen feedline for the 17-inch disconnect, coming up from below. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

    NASA Image and Video Library

    2003-11-11

    KENNEDY SPACE CENTER, FLA. - Viewed from inside the aft section of the orbiter Discovery, a worker installs the liquid oxygen feedline for the 17-inch disconnect, coming up from below. The 17-inch liquid oxygen and liquid hydrogen disconnects provide the propellant feed interface from the external tank to the orbiter main propulsion system and the three Shuttle main engines.

  9. 7 CFR 999.200 - Regulation governing the importation of prunes.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) fermentation; (5) skin or flesh damage; (6) scab; (7) burned; (8) mold; (9) imbedded dirt; (10) insect...-eighths of one inch (3/8″) but not more than one-half of one inch (1/2″) in length. (4) Fermentation means damage to the flesh by fermentation to the extent that the characteristic appearance or flavor is...

  10. Development of an NCHRP report 350 TL-3 New Jersey shape 50-inch portable concrete barrier : final report, June 2006.

    DOT National Transportation Integrated Search

    2006-06-01

    For roadside work-zones in areas that have opposing traffic flow, safety is enhanced if the temporary barriers incorporate a "glare-shield" that blocks headlight glare from opposing traffic. Currently-available 32-inch portable concrete barriers requ...

  11. Double Star Measurements at the Northern Sky with a 10 inch Newtonian in 2014 and 2015

    NASA Astrophysics Data System (ADS)

    Anton, Rainer

    2017-07-01

    A 10 inch Newtonian was used for recordings of double stars with a CCD webcam, and measurements of 120 pairs were done with the technique of “lucky imaging”. A rather accurate value of the image scale was obtained with reference systems from the recently published Gaia catalogue of very precise position data. For several pairs, deviations from currently assumed orbits were found. Some images of noteworthy systems are also presented.

  12. Experimental Investigation of Project Orion Crew Exploration Vehicle Aeroheating: LaRC 20-Inch Mach 6 Air Tunnel Test 6931

    NASA Technical Reports Server (NTRS)

    Hollis, Brian R.

    2009-01-01

    An investigation of the aeroheating environment of the Project Orion Crew Entry Vehicle has been performed in the Langley Research Center 20-Inch Mach 6 Air Tunnel. Data were measured on a approx.3.5% scale model (0.1778-m/7-inch diameter) of the vehicle using coaxial thermocouples at free stream Reynolds numbers of 2.0 10(exp 6)/ft to 7.30 10(exp 6)/ft and computational predictions were generated for all test conditions. The primary goals of this test were to obtain convective heating data for use in assessing the accuracy of the computational technique and to validate test methodology and heating data from a test of the same wind tunnel model in the Arnold Engineering Development Center Tunnel 9. Secondary goals were to determine the extent of transitional/turbulent data which could be produced on a CEV model in this facility, either with or without boundary-layer trips, and to demonstrate continuous pitch-sweep operation in this tunnel for heat transfer testing.

  13. Scintillation properties of a 2-inch diameter KCa0.8Sr0.2I3:Eu2+ single crystal

    NASA Astrophysics Data System (ADS)

    Wu, Yuntao; Lindsey, Adam C.; Loyd, Matthew; Stand, Luis; Zhuravleva, Mariya; Koschan, Merry; Melcher, Charles L.

    2017-09-01

    Inch-sized scintillating crystals are required for practical radiation detectors such as hand-held radio-isotope identification devices. In this work, a transparent and colorless 2-inch diameter KCa0.8Sr0.2I3: 0 . 5 mo% Eu2+ single crystal was grown by the vertical Bridgman method, and the scintillation properties of a ∅ 50 mm × 45 mm long sample were evaluated. The Eu2+ 5d1- 4 f emission under X-ray excitation is centered at 472 nm. Its scintillation decay time under 137 Cs source irradiation is 2 . 37 μs, and the absolute light output is 51,000 ± 3000 photons/MeV. The energy resolution at 662 keV was evaluated for different orientations of the crystals with respect to the PMT, and the effect of 40 K background subtraction on energy resolution was evaluated. The performance of the packaged crystal was also investigated.

  14. Spectroscopic classification of Gaia17apq and Gaia17apv with Double Spectrograph on Palomar 200-inch telescope

    NASA Astrophysics Data System (ADS)

    Blagorodnova, N.; Adams, S.

    2017-03-01

    We report the classification of Gaia17apq and Gaia17apv (SN2017cao and SN2017cat), discovered by the Gaia ESA survey. The observations were performed on UT 2017-03-16 with the Double Spectrograph (DBSP; range 350-1000nm, spectral resolution R 4000) on Palomar 200-inch (P200) telescope.

  15. Astrometric observations of visual binaries using 26-inch refractor during 2007-2014 at Pulkovo

    NASA Astrophysics Data System (ADS)

    Izmailov, I. S.; Roshchina, E. A.

    2016-04-01

    We present the results of 15184 astrometric observations of 322 visual binaries carried out in 2007-2014 at Pulkovo observatory. In 2007, the 26-inch refractor ( F = 10413 mm, D = 65 cm) was equipped with the CCD camera FLI ProLine 09000 (FOV 12' × 12', 3056 × 3056 pixels, 0.238 arcsec pixel-1). Telescope automation and weather monitoring system installation allowed us to increase the number of observations significantly. Visual binary and multiple systems with an angular distance in the interval 1."1-78."6 with 7."3 on average were included in the observing program. The results were studied in detail for systematic errors using calibration star pairs. There was no detected dependence of errors on temperature, pressure, and hour angle. The dependence of the 26-inch refractor's scale on temperature was taken into account in calculations. The accuracy of measurement of a single CCD image is in the range of 0."0005 to 0."289, 0."021 on average along both coordinates. Mean errors in annual average values of angular distance and position angle are equal to 0."005 and 0.°04 respectively. The results are available here http://izmccd.puldb.ru/vds.htmand in the Strasbourg Astronomical Data Center (CDS). In the catalog, the separations and position angles per night of observation and annual average as well as errors for all the values and standard deviations of a single observation are presented. We present the results of comparison of 50 pairs of stars with known orbital solutions with ephemerides.

  16. 16-Inch Diameter Ramjet Prepared for Flight Test

    NASA Image and Video Library

    1947-07-21

    A NACA researcher prepares a 16-inch diameter and 16-foot long ramjet for a launch over Wallops Island in July 1947. The Lewis Flight Propulsion Laboratory conducted a wide variety of studies on ramjets in the 1940s and 1960s to determine the basic operational data necessary to design missiles. Although wind tunnel and test stand investigations were important first steps in determining these factors, actual flight tests were required. Lewis possessed several aircraft for the ramjet studies, including North American F-82 Mustangs, a Northrup P-61 Black Widow, and a Boeing B-29 Superfortress, which was used for this particular ramjet. This was Lewis’ first flight at over the experimental testing ground at Wallops Island. The NACA’s Langley laboratory established the station on the Virginia coast in 1945 to conduct early missile tests. This ramjet-powered missile was affixed underneath the B-29’s left wing and flown up to 29,000 feet. The ramjet was ignited as the aircraft reached Mach 0.5 and released. The flight went well, but a problem with the data recording prevented a successful mission. Nonetheless additional flights in November 1947 provided researchers with data on the engine’s combustion efficiency at different levels of fuel-air ratios, thrust coefficients, temperatures, and drag. Transonic flight data such as the rapid acceleration through varying flight conditions could not be easily captured in wind tunnels.

  17. The yield of Douglas-fir in the Pacific Northwest measured by international 1/4-inch kerf log rule.

    Treesearch

    Philip A. Briegleb

    1948-01-01

    The international log rule is little used in the Douglas-fir region today, but it is likely to find wider use here in the future. This is the opinion of a number of foresters preparing plans for the management of forest properties in the region. Advantage of the International 1/4-inch kerf log rule is that log scale by this measure approximates the volume of green...

  18. Reactivation and upgrade of the NASA Ames 16-Inch Shock Tunnel - Status report

    NASA Technical Reports Server (NTRS)

    Bogdanoff, David W.; Zambrana, Horacio A.; Cavolowsky, John A.; Newfield, Mark E.; Cornelison, Charles J.; Miller, Robert J.

    1992-01-01

    The NASA Ames 16-Inch Shock Tunnel has been reactivated after seventeen years of inactivity. In the years before deactivating the facility, it was operated at enthalpies of 4,700 J/gm and pressures up to 260 atm or at enthalpies of 1900 J/gm over a wide pressure range. Since reactivating, the facility has been operated at enthalpies up to 12,000 J/gm and pressures up to 408 atm. The present paper describes the steps taken in upgrading the facility and summarizes the currently achievable conditions. The selection of the driver gas, the steps taken to improve the driver burn, and the diaphragm opening techniques are described. The pressure and heat flux instrumentation, the optical diagnostics and the data acquisition system are also described.

  19. Demonstration of short haul aircraft aft noise reduction techniques on a twenty inch (50.8 cm) diameter fan, volume 3

    NASA Technical Reports Server (NTRS)

    Stimpert, D. L.

    1975-01-01

    Tests of a twenty inch diameter, low tip speed, low pressure ratio fan which investigated aft fan noise reduction techniques are reported. The 1/3 octave band sound data are presented for all the configurations tested. The model data are presented on 17 foot arc and extrapolated to 200 foot sideline.

  20. Environmental Assessment: Employment of the 2.75-Inch Rocket at Saylor Creek Air Force Range

    DTIC Science & Technology

    2007-06-01

    F i n a l E n v i r o n m e n t a l A s s e s s m e n t Employment of the 2.75-Inch Rocket at Saylor Creek Air Force Range Prepared for...notwithstanding any other provision of law, no person shall be subject to a penalty for failing to comply with a collection of information if it does not...display a currently valid OMB control number. 1. REPORT DATE JUN 2007 2. REPORT TYPE 3. DATES COVERED 00-00-2007 to 00-00-2007 4. TITLE AND

  1. The 88-Inch Cyclotron: A One-Stop Facility for Electronics Radiation and Detector Testing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kireeff Covo, M.; Albright, R. A.; Ninemire, B. F.

    In outer space down to the altitudes routinely flown by larger aircrafts, radiation can pose serious issues for microelectronics circuits. The 88-Inch Cyclotron at Lawrence Berkeley National Laboratory is a sector-focused cyclotron and home of the Berkeley Accelerator Space Effects Facility, where the effects of energetic particles on sensitive microelectronics are studied with the goal of designing electronic systems for the space community. This paper describes the flexibility of the facility and its capabilities for testing the bombardment of electronics by heavy ions, light ions, and neutrons. Experimental capabilities for the generation of neutron beams from deuteron breakups and radiationmore » testing of carbon nanotube field effect transistor will be discussed.« less

  2. Projected economic impacts of a 16-Inch tree cutting cap for ponderosa pine forests within the greater Flagstaff urban-wildlands

    Treesearch

    Debra Larson; Richard Mirth

    2001-01-01

    The Grand Canyon Forest Partnership (GCFP), located in Flagstaff, AZ, has implemented a 16-inch diameter breast height cutting cap in the Fort Valley Restoration (Phase One) Project to secure the support of environmental organizations for urban interface forest restoration and fuels reduction projects. This paper provides insights into the economic impacts of this...

  3. Real gas flow parameters for NASA Langley 22-inch Mach 20 helium tunnel

    NASA Technical Reports Server (NTRS)

    Hollis, Brian R.

    1992-01-01

    A computational procedure was developed which can be used to determine the flow properties in hypersonic helium wind tunnels in which real gas behavior is significant. In this procedure, a three-coefficient virial equation of state and the assumption of isentropic nozzle flow are employed to determine the tunnel reservoir, nozzle, throat, freestream, and post-normal shock conditions. This method was applied to a range of conditions which encompasses the operational capabilities of the LaRC 22-Inch Mach 20 Helium Tunnel. Results are presented graphically in the form of real gas correction factors which can be applied to perfect gas calculations. Important thermodynamic properties of helium are also plotted versus pressure and temperature. The computational scheme used to determine the real-helium flow parameters was incorporated into a FORTRAN code which is discussed.

  4. Performance differences when using 26- and 29-inch-wheel bikes in Swiss National Team cross-country mountain bikers.

    PubMed

    Steiner, Thomas; Müller, Beat; Maier, Thomas; Wehrlin, Jon Peter

    2016-08-01

    The purpose of this study was to analyse the effect of bike type - the 26-inch-wheel bike (26" bike) and the 29-inch-wheel bike (29" bike) - on performance in elite mountain bikers. Ten Swiss National Team athletes (seven males, three females) completed six trials with individual start on a simulated cross-country course with 35 min of active recovery between trials (three trials on a 26" bike and three trials on a 29" bike, alternate order, randomised start-bike). The course consisted of two separate sections expected to favour either the 29" bike (section A) or the 26" bike (section B). For each trial performance, power output, cadence and heart rate were recorded and athletes' experiences were documented. Mean overall performance (time: 304 ± 27 s vs. 311 ± 29 s; P < 0.01) and performance in sections A (P < 0.001) and B (P < 0.05) were better when using the 29" bike. No significant differences were observed for power output, cadence or heart rate. Athletes rated the 29" bike as better for performance in general, passing obstacles and traction. The 29" bike supports superior performance for elite mountain bikers, even on sections supposed to favour the 26" bike.

  5. 30 GHz monolithic balanced mixers using an ion-implanted FET-compatible 3-inch GaAs wafer process technology

    NASA Technical Reports Server (NTRS)

    Bauhahn, P.; Contolatis, A.; Sokolov, V.; Chao, C.

    1986-01-01

    An all ion-implanted Schottky barrier mixer diode which has a cutoff frequency greater than 1000 GHz has been developed. This new device is planar and FET-compatible and employs a projection lithography 3-inch wafer process. A Ka-band monolithic balanced mixer based on this device has been designed, fabricated and tested. A conversion loss of 8 dB has been measured with a LO drive of 10 dBm at 30 GHz.

  6. Multimedia Archiving: Videotape, Compact Disc (CD), Digital Versatile Disc (DVD), and Blu-Ray Disc (BD) Media

    DTIC Science & Technology

    2010-02-01

    color and memory SMPTE Society of Motion Picture and Television Engineers SP Superior Performance ( Betacam SP) S-VHS Super VHS TBC time base...modified Iron Oxide 1.5 mil 3/4 inch ENG, Independent production Betamax 1/2 inch Consumer Betacam Cobalt-modified Iron Oxide, Chromium Dioxide 0.8...mil 1/2 inch ENG, Independent production, Government Betacam SP Metal particle 0.55 mil 1/2 inch ENG, Independent production M-II Metal particle

  7. Development of the Software for 30 inch Telescope Control System at KHAO

    NASA Astrophysics Data System (ADS)

    Mun, B.-S.; Kim, S.-J.; Jang, M.; Min, S.-W.; Seol, K.-H.; Moon, K.-S.

    2006-12-01

    Even though 30inch optical telescope at Kyung Hee Astronomy Observatory has been used to produce a series of scientific achievements since its first light in 1992, numerous difficulties in the operation of the telescope have hindered the precise observations needed for further researches. Since the currently used PC-TCS (Personal Computer based Telescope Control system) software based on ISA-bus type is outdated, it doesn't have a user friendly interface and make it impossible to scale. Also accumulated errors which are generated by discordance from input and output signals into a motion controller required new control system. Thus we have improved the telescope control system by updating software and modifying mechanical parts. We applied a new BLDC (brushless DC) servo motor system to the mechanical parts of the telescope and developed a control software using Visual Basic 6.0. As a result, we could achieve a high accuracy in controlling of the telescope and use the userfriendly GUI (Graphic User Interface).

  8. Failure analysis of a 3.5 inch, 50 ampere-hour nickel-hydrogen cell

    NASA Technical Reports Server (NTRS)

    Fuhr, Kenneth H.

    1987-01-01

    The 3.5 inch, 50 ampere-hour nickel-hydrogen cell was on a Low Earth Orbit (LEO) test regime and was being cycled at 10 C and 60 percent depth of discharge. At cycle number 511 the Automatic Control and Data Acquisition System (ACDAS) terminated the test when the end of discharge voltage dropped below the 1.00 volt cutoff. Upon removal of the stack assembly from the pressure vessel, portions of the zircar separator were found to be completely missing. Upon further examination portions of both the positive and negative plates were found to be missing from its substrate and several gas screens were damaged due to excessive heat which caused fusing. The postulated cause of failure is free electrolyte in the cell which caused oxygen channelization resulting in localized recombination which degraded the stack components.

  9. Boeing 18-Inch Fan Rig Broadband Noise Test

    NASA Technical Reports Server (NTRS)

    Ganz, Ulrich W.; Joppa, Paul D.; Patten, Timothy J.; Scharpf, Daniel F.

    1998-01-01

    The purposes of the subject test were to identify and quantify the mechanisms by which fan broadband noise is produced, and to assess the validity of such theoretical models of those mechanisms as may be available. The test was conducted with the Boeing 18-inch fan rig in the Boeing Low-Speed Aeroacoustic Facility (LSAF). The rig was designed to be particularly clean and geometrically simple to facilitate theoretical modeling and to minimize sources of interfering noise. The inlet is cylindrical and is equipped with a boundary layer suction system. The fan is typical of modern high-by-pass ratio designs but is capable of operating with or without fan exit guide vanes (stators), and there is only a single flow stream. Fan loading and tip clearance are adjustable. Instrumentation included measurements of fan performance, the unsteady flow field incident on the fan and stators, and far-field and in-duct acoustic fields. The acoustic results were manipulated to estimate the noise generated by different sources. Significant fan broadband noise was found to come from the rotor self-noise as measured with clean inflow and no boundary layer. The rotor tip clearance affected rotor self-noise somewhat. The interaction of the rotor with inlet boundary layer turbulence is also a significant source, and is strongly affected by rotor tip clearance. High level noise can be generated by a high-order nonuniform rotating at a fraction of the fan speed, at least when tip clearance and loading are both large. Stator-generated noise is the loudest of the significant sources, by a small margin, at least on this rig. Stator noise is significantly affected by propagation through the fan.

  10. Tests of Aerodynamically Heated Multiweb Wing Structures in a Free Jet at Mach Number 2: Five Aluminum-Alloy Models of 20-Inch Chord with 0.064-Inch-Thick Skin, 0.025-Inch-Thick Webs, and Various Chordwise Stiffening at 2 deg Angle of Attack

    NASA Technical Reports Server (NTRS)

    Trussell, Donald H.; Thomson, Robert G.

    1960-01-01

    An experimental study was made on five 2024-T3 aluminum-alloy multiweb wing structures (MW-2-(4), MW-4-(3), mw-16, MW-17, and MW-18), at a Mach number of 2 and an angle of attack of 2 deg under simulated supersonic flight conditions. These models, of 20-inch chord and semi-span and 5-percent-thick circular-arc airfoil section, were identical except for the type and amount of chordwise stiffening. One model with no chordwise ribs between root and tip bulkhead fluttered and failed dynamically partway through its test. Another model with no chordwise ribs (and a thinner tip bulkhead) experienced a static bending type of failure while undergoing flutter. The three remaining models with one, two, or three chordwise ribs survived their tests. The test results indicate that the chordwise shear rigidity imparted to the models by the addition of even one chordwise rib precludes flutter and subsequent failure under the imposed test conditions. This paper presents temperature and strain data obtained from the tests and discusses the behavior of the models.

  11. Lead-Free Double-Base Propellant for the 2.75 Inch Rocket Motor

    NASA Technical Reports Server (NTRS)

    Magill, B. T.; Nauflett, G. W.; Furrow, K. W.

    2000-01-01

    The current MK 66 2.75 inch Rocket Motor double-base propellant contains the lead-based ballistic modifier LC-12-15 to achieve the desired plateau and mesa burning rate characteristics. The use of lead compounds poses a concern for the environment and for personal safety due to the metal's toxic nature when introduced into the atmosphere by propellant manufacture, rocket motor firing, and disposal. Copper beta-resorcylate (copper 2,4-di-hydroxy-benzoate) was successfully used in propellant as a simple modifier in the mid 1970's. This and other compounds have also been mixed with lead salts to obtain more beneficial ballistic results. Synthesized complexes of lead and copper compounds soon replaced the mixtures. The complexes incorporate the lead, copper lack of organic liquids, which allows for easier propellant processing. About ten years ago, the Indian Head Division, Naval Surface Warfare Center (NSWC), initiated an effort to develop a lead-free propellant for use in missile systems. Several lead-free propellant candidate formulations were developed. About five years ago, NSWC, in conjunction with Alliant Techsystems, Radford Army Ammunition Plant, continued ballistic modifier investigations. A four component ballistic modifier system without lead for double-base propellants that provide adequate plateau and mesa burn rate characteristics was developed and patented. The ballistic modifier's system contains bismuth subsalicylate, 1.5 percent; copper salicylate, 1.0 percent, copper stannate, 0.77 percent; and carbon black, 0.1 percent. Action time and impulse data obtained through multiple static firings indicate that the new lead-free double-base propellant, while not a match for NOSIH-AA-2, will be a very suitable replacement in the 2.75 inch Rocket Motor. Accelerated aging of the double-base propellant containing the lead-free ballistic modifier showed that it had a much higher rate of stabilizer depletion than the AA-2. A comprehensive study showed that an

  12. User's manual for a 0.3-m TCT wall interference assessment/correction procedure: 8- by 24-inch airfoil test section

    NASA Technical Reports Server (NTRS)

    Gumbert, C. R.

    1985-01-01

    A transonic Wall-Interference Assessment/Correction (WIAC) procedure has been developed and verified for the 8- by 24-inch airfoil test section of the Langley 0.3-m Transonic Cryogenic Tunnel. This report is a user's manual for the correction procedure. It includes a listing of the computer procedure file as well as input for and results from a step-by-step sample case.

  13. Test and Analysis of Foam Impacting a 6x6 Inch RCC Flat Panel

    NASA Technical Reports Server (NTRS)

    Lessard, Wendy B.

    2006-01-01

    This report presents the testing and analyses of a foam projectile impacting onto thirteen 6x6 inch flat panels at a 90 degrees incidence angle. The panels tested in this investigation were fabricated of Reinforced-Carbon-Carbon material and were used to aid in the validation of an existing material model, MAT58. The computational analyses were performed using LS-DYNA, which is a physics-based, nonlinear, transient, finite element code used for analyzing material responses subjected to high impact forces and other dynamic conditions. The test results were used to validate LS-DYNA predictions and to determine the threshold of damage generated by the MAT58 cumulative damage material model. The threshold of damage parameter represents any external or internal visible RCC damage detectable by nondestructive evaluation techniques.

  14. What governs governance, and how does it evolve? The sociology of governance-in-action.

    PubMed

    Fox, Nick J; Ward, Katie J

    2008-09-01

    Governance addresses a wide range of issues including social, economic and political continuity, security and integrity, individual and collective safety and the liberty and rights to self-actualization of citizens. Questions to be answered include how governance can be achieved and sustained within a social context imbued with cultural values and in which power is distributed unevenly and dynamically, and how governance impacts on individuals and institutions. Drawing on Gramscian notions of hegemony and consent, and recent political science literatures on regulation and meta-regulation, this paper develops a sociological model of governance that emphasizes a dynamic and responsive governance in action. Empirical data from a study of pharmaceutical governance is used to show how multiple institutions and actors are involved in sustaining effective governance. The model addresses issues of how governance is sustained in the face of change, why governance of practices varies from setting to setting, and how governance is achieved without legislation.

  15. Force test of a 0.88 percent scale 142-inch diameter solid rocket booster (MSFC model number 461) in the NASA/MSFC high Reynolds number wind tunnel (SA13F)

    NASA Technical Reports Server (NTRS)

    Johnson, J. D.; Winkler, G. W.

    1976-01-01

    The results are presented of a force test of a .88 percent scale model of the 142 inch solid rocket booster without protuberances, conducted in the MSFC high Reynolds number wind tunnel. The objective of this test was to obtain aerodynamic force data over a large range of Reynolds numbers. The test was conducted over a Mach number range from 0.4 to 3.5. Reynolds numbers based on model diameter (1.25 inches) ranged from .75 million to 13.5 million. The angle of attack range was from 35 to 145 degrees.

  16. Reentry aerodynamics forces and moments on the engine nozzle of the 146-inch solid rocket booster model 473 tested in MSFC 14 by 14 inch trisonic wind tunnel (SA30F)

    NASA Technical Reports Server (NTRS)

    Johnson, J. D.; Braddock, W. F.

    1975-01-01

    A test of a model of the Space Shuttle Solid Rocket Boosters (SRB's) was performed in a 14 x 14 inch Trisonic Wind Tunnel to determine the aerodynamic forces and moments imposed on the nozzle of the SRB during reentry. The model, with scale dimensions equal to 0.5479 of the actual SRB dimensions, was instrumented with a six-component force balance attached to the model nozzle so that only forces and moments acting on the nozzle were measured. A total of 137 runs (20 deg pitch polars) were performed during this test. The angle of attack ranged from 60 to 185 deg, the Reynolds number from 5.2 million to 7.6 million. The Mach numbers investigated were 1.96, 2.74, and 3.48. Five external protuberances were simulated. The effective roll angle simulated was 180 deg. The effects of three different heat shield configurations were investigated.

  17. 48 CFR 225.7303-3 - Government-to-government agreements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Government-to-government... Military Sales 225.7303-3 Government-to-government agreements. If a government-to-government agreement between the United States and a foreign government for the sale, coproduction, or cooperative logistic...

  18. 48 CFR 225.7303-3 - Government-to-government agreements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Government-to-government... Military Sales 225.7303-3 Government-to-government agreements. If a government-to-government agreement between the United States and a foreign government for the sale, coproduction, or cooperative logistic...

  19. 48 CFR 225.7303-3 - Government-to-government agreements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Government-to-government... Military Sales 225.7303-3 Government-to-government agreements. If a government-to-government agreement between the United States and a foreign government for the sale, coproduction, or cooperative logistic...

  20. 48 CFR 225.7303-3 - Government-to-government agreements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Government-to-government... Military Sales 225.7303-3 Government-to-government agreements. If a government-to-government agreement between the United States and a foreign government for the sale, coproduction, or cooperative logistic...

  1. Spark ignition of flowing gases I : energies to ignite propane-air mixtures in pressure range of 2 to 4 inches mercury absolute

    NASA Technical Reports Server (NTRS)

    Swett, Clyde C , Jr

    1949-01-01

    Ignition studies of flowing gases were made to obtain information applicable to ignition problems in gas-turbine and ram-jet aircraft propulsion systems operating at altitude conditions.Spark energies required for ignition of a flowing propane-air mixture were determined for pressure of 2 to 4 inches mercury absolute, gas velocities of 5.0 to 54.2 feet per second, fuel-air ratios of 0.0607 to 0.1245, and spark durations of 1.5 to 24,400 microseconds. The results showed that at a pressure of 3 inches mercury absolute the minimum energy required for ignition occurred at fuel-air ratios of 0.08 to 0.095. The energy required for ignition increased almost linearly with increasing gas velocity. Shortening the spark duration from approximately 25,000 to 125 microseconds decreased the amount of energy required for ignition. A spark produced by the discharge of a condenser directly into the spark gap and having a duration of 1.5 microseconds required ignition energies larger than most of the long-duration sparks.

  2. Game analysis among the central government, local governments, and firms in China’s environmental pollution governance

    NASA Astrophysics Data System (ADS)

    Li, Shuwen; Xu, Jin

    2018-05-01

    China’s environmental pollution governance has entered the game stage centered on interests, and there are three main bodies in environmental pollution governance: the central government, local governments and firms. The research firstly reveals the relationships among the central government, local governments, and firms in the process of environmental governance, and then analyzes the game among the central government, local governments and firms using game theory in Economics. Finally, the research makes a conclusion and proposes some corresponding policy proposals so as to solve the problem of environmental pollution.

  3. Government-to-Government E-Government: A Case Study of a Federal Financial Program

    ERIC Educational Resources Information Center

    Faokunla, Olumide Adegboyega

    2012-01-01

    The problem with the study of the concept of electronic government (e-Gov) is that scholars in the field have not adequately explored various dimensions of the concept. Literature on e-Gov is replete with works on the form of government to consumer e-Gov. Much less work had been done on the government to government (G2G) e-Gov. This qualitative…

  4. Applying TOGAF for e-government implementation based on service oriented architecture methodology towards good government governance

    NASA Astrophysics Data System (ADS)

    Hodijah, A.; Sundari, S.; Nugraha, A. C.

    2018-05-01

    As a Local Government Agencies who perform public services, General Government Office already has utilized Reporting Information System of Local Government Implementation (E-LPPD). However, E-LPPD has upgrade limitation for the integration processes that cannot accommodate General Government Offices’ needs in order to achieve Good Government Governance (GGG), while success stories of the ultimate goal of e-government implementation requires good governance practices. Currently, citizen demand public services as private sector do, which needs service innovation by utilizing the legacy system as a service based e-government implementation, while Service Oriented Architecture (SOA) to redefine a business processes as a set of IT enabled services and Enterprise Architecture from the Open Group Architecture Framework (TOGAF) as a comprehensive approach in redefining business processes as service innovation towards GGG. This paper takes a case study on Performance Evaluation of Local Government Implementation (EKPPD) system on General Government Office. The results show that TOGAF will guide the development of integrated business processes of EKPPD system that fits good governance practices to attain GGG with SOA methodology as technical approach.

  5. Silicon Chemical Vapor Deposition Process Using a Half-Inch Silicon Wafer for Minimal Manufacturing System

    NASA Astrophysics Data System (ADS)

    Li, Ning; Habuka, Hitoshi; Ikeda, Shin-ichi; Hara, Shiro

    A chemical vapor deposition reactor for producing thin silicon films was designed and developed for achieving a new electronic device production system, the Minimal Manufacturing, using a half-inch wafer. This system requires a rapid process by a small footprint reactor. This was designed and verified by employing the technical issues, such as (i) vertical gas flow, (ii) thermal operation using a highly concentrated infrared flux, and (iii) reactor cleaning by chlorine trifluoride gas. The combination of (i) and (ii) could achieve a low heating power and a fast cooling designed by the heat balance of the small wafer placed at a position outside of the reflector. The cleaning process could be rapid by (iii). The heating step could be skipped because chlorine trifluoride gas was reactive at any temperature higher than room temperature.

  6. 2.1 meter (82 inch) Slip Ring By-Pass Project

    NASA Astrophysics Data System (ADS)

    Bryan, Corby B.

    2006-12-01

    2.1 meter (82 inch) Slip Ring By-Pass Project I will describe a project to bypass the old method of getting control communications above the rotation point of the McDonald Observatory 2.1 meter dome. The old method used slip rings that were implemented in the late 1930s. The new system uses wireless serial commands which allow the control lines to be taken off the slip rings, leaving only power and ground. I will describe how the concept was devised so the slip rings could be by-passed, what micro-controller system that was decided on and used, how the wireless units were set up and finally how the system was tested and put in place with only limited tasks to control. (I.E. the opening and closing of the shutters) We describe the advantages to making this upgrade and how it could benefit any telescope interested in upgrading its communication systems. This project was designed and tested in ten weeks during the McDonald Observatory REU and was supported under NSF AST-0243745. The system was designed so that it could be installed while running side by side with the current method of getting control to the above rotation point. The method is still in place being tested on the 2.1 meter telescope and will soon be fully implemented by the University of Texas McDonald Observatory OS staff.

  7. Description and initial operating performance of the Langley 6-inch expansion tube using heated helium driver gas

    NASA Technical Reports Server (NTRS)

    Moore, J. A.

    1975-01-01

    A general description of the Langley 6-inch expansion tube is presented along with discussion of the basic components, internal resistance heater, arc-discharge assemblies, instrumentation, and operating procedure. Preliminary results using unheated and resistance-heated helium as the driver gas are presented. The driver-gas pressure ranged from approximately 17 to 59 MPa and its temperature ranged from 300 to 510 K. Interface velocities of approximately 3.8 to 6.7 km/sec were generated between the test gas and the acceleration gas using air as the test gas and helium as the acceleration gas. Test flow quality and comparison of measured and predicted expansion-tube flow quantities are discussed.

  8. Summary of LaRC 2-inch Erectable Joint Hardware Heritage Test Data

    NASA Technical Reports Server (NTRS)

    Dorsey, John T.; Watson, Judith J.

    2016-01-01

    As the National Space Transportation System (STS, also known as the Space Shuttle) went into service during the early 1980's, NASA envisioned many missions of exploration and discovery that could take advantage of the STS capabilities. These missions included: large orbiting space stations, large space science telescopes and large spacecraft for manned missions to the Moon and Mars. The missions required structures that were significantly larger than the payload volume available on the STS. NASA Langley Research Center (LaRC) conducted studies to design and develop the technology needed to assemble the large space structures in orbit. LaRC focused on technology for erectable truss structures, in particular, the joint that connects the truss struts at the truss nodes. When the NASA research in large erectable space structures ended in the early 1990's, a significant amount of structural testing had been performed on the LaRC 2-inch erectable joint that was never published. An extensive set of historical information and data has been reviewed and the joint structural testing results from this historical data are compiled and summarized in this report.

  9. Recent development on the realization of a 1-inch VSiPMT prototype

    NASA Astrophysics Data System (ADS)

    Barbato, F. C. T.; Barbarino, G.; Campajola, L.; Di Capua, F.; Mollo, C. M.; Valentini, A.; Vivolo, D.

    2017-03-01

    The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an innovative design for a revolutionary hybrid photodetector. The idea, born with the purpose to use a SiPM for large detection volumes, consists in replacing the classical dynode chain with a SiPM. In this configuration, we match the large sensitive area of a photocathode with the performances of the SiPM technology, which therefore acts like an electron detector and so like a current amplifier. The excellent photon counting capability, fast response, low power consumption and great stability are among the most attractive features of the VSiPMT. In order to realize such a device we first studied the feasibility of this detector both from theoretical and experimental point of view, by implementing a Geant4-based simulation and studying the response of a special non-windowed MPPC by Hamamatsu with an electron beam. Thanks to this result Hamamatsu realized two VSiPMT industrial prototypes with a photocathode of 3mm diameter. We present the progress on the realization of a 1-inch prototype and the preliminary tests we are performing on it.

  10. 49 CFR 231.24 - Box and other house cars with roofs, 16 feet 10 inches or more above top of rail. 1

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... for “Box and Other House Cars.” (3) Location. One (1) near each side of each end of car on outer edge... 49 Transportation 4 2011-10-01 2011-10-01 false Box and other house cars with roofs, 16 feet 10... APPLIANCE STANDARDS § 231.24 Box and other house cars with roofs, 16 feet 10 inches or more above top of...

  11. 49 CFR 231.24 - Box and other house cars with roofs, 16 feet 10 inches or more above top of rail. 1

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... for “Box and Other House Cars.” (3) Location. One (1) near each side of each end of car on outer edge... 49 Transportation 4 2013-10-01 2013-10-01 false Box and other house cars with roofs, 16 feet 10... APPLIANCE STANDARDS § 231.24 Box and other house cars with roofs, 16 feet 10 inches or more above top of...

  12. 49 CFR 231.24 - Box and other house cars with roofs, 16 feet 10 inches or more above top of rail. 1

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... for “Box and Other House Cars.” (3) Location. One (1) near each side of each end of car on outer edge... 49 Transportation 4 2010-10-01 2010-10-01 false Box and other house cars with roofs, 16 feet 10... APPLIANCE STANDARDS § 231.24 Box and other house cars with roofs, 16 feet 10 inches or more above top of...

  13. 49 CFR 231.24 - Box and other house cars with roofs, 16 feet 10 inches or more above top of rail. 1

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... for “Box and Other House Cars.” (3) Location. One (1) near each side of each end of car on outer edge... 49 Transportation 4 2012-10-01 2012-10-01 false Box and other house cars with roofs, 16 feet 10... APPLIANCE STANDARDS § 231.24 Box and other house cars with roofs, 16 feet 10 inches or more above top of...

  14. 49 CFR 231.24 - Box and other house cars with roofs, 16 feet 10 inches or more above top of rail. 1

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... for “Box and Other House Cars.” (3) Location. One (1) near each side of each end of car on outer edge... 49 Transportation 4 2014-10-01 2014-10-01 false Box and other house cars with roofs, 16 feet 10... APPLIANCE STANDARDS § 231.24 Box and other house cars with roofs, 16 feet 10 inches or more above top of...

  15. Vertical Force-deflection Characteristics of a Pair of 56-inch-diameter Aircraft Tires from Static and Drop Tests with and Without Prerotation

    NASA Technical Reports Server (NTRS)

    Smiley, Robert F; Horne, Walter B

    1957-01-01

    The vertical force-deflection characteristics were experimentally determined for a pair of 56-inch-diameter tires under static and drop-test conditions with and without prerotation. For increasing force, the tires were found to be least stiff for static tests, almost the same as for the static case for prerotation drop tests as long as the tires remain rotating, and appreciably stiffer for drop tests without prerotation.

  16. Data book for 12.5-inch diameter SRB thermal model water flotation test; 1.29 psia, series P022

    NASA Technical Reports Server (NTRS)

    Allums, S. L.

    1974-01-01

    Data acquired from tests conducted to determine how thermal conditions affect SRB (Space Shuttle Solid Rocket Booster) flotation at a scaled pressure of 1.29 psia are presented. Included are acceleration, pressure, and temperature data recorded from initial water impact to final flotation position using a 12.5-inch diameter thermal model of the SRB. Nineteen valid tests were conducted. These thermal tests indicated the following basic differences relative to the ambient temperature and pressure model tests: (1) more water was taken on board during penetration and (2) model flotation/sinking was temperature sensitive.

  17. 77 FR 18258 - Government-to-Government Telephonic Consultation Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-27

    ... DEPARTMENT OF THE INTERIOR National Park Service [NPS-WASO-NRNHL-0212-9515; 2280-665] Government-to-Government Telephonic Consultation Meetings AGENCY: National Park Service, Interior. SUMMARY: The National Park Service announces two telephonic government- to-government consultation meetings with Indian...

  18. From "Boy-Government" and "Student-Government" to "Learner-Government": The Best of Both Worlds?

    ERIC Educational Resources Information Center

    Mathebula, Thokozani

    2018-01-01

    In the history of South African education there have been three contrasting attempts to incorporate learners into the authority structures of schools, namely: "boy-government" (prefect system), "student-government" (Student Representative Councils (SRCs)) and "learner-government" (Representative Councils of Learners…

  19. Commissioning of the Dual-Beam Imaging Polarimeter for the University of Hawaii 88 inch Telescope

    NASA Astrophysics Data System (ADS)

    Masiero, Joseph; Hodapp, Klaus; Harrington, Dave; Lin, Haosheng

    2007-10-01

    In this paper we present the design, calibration method, and initial results of the Dual-Beam Imaging Polarimeter (DBIP). This new instrument is designed to measure the optical polarization properties of point sources, in particular, Main Belt asteroids. This instrument interfaces between the Tek 2048×2048 camera and the University of Hawaii's 88 inch telescope and is available for facility use. Using DBIP we are able to measure linear polarization with a 1 σ Poisson signal noise of 0.03% per measurement and a systematic error of order 0.06%+/-0.02%. In addition, we discuss measurements of the polarization of the asteroid 16 Psyche that were taken as part of the instrument commissioning. We confirm Psyche's negative polarization of -1.037%+/-0.006% but find no significant modulation of the signal with rotation above the 0.05% polarization level.

  20. An Investigation of Four Wings of Square Plan Form at a Mach Number of 6.9 in the Langley 11-inch Hypersonic Tunnel

    NASA Technical Reports Server (NTRS)

    Mclellan, Charles H; Bertram, Mitchel H; Moore, John A

    1957-01-01

    The results of pressure-distribution and force tests of four wings at a Mach number of about 6.9 and a Reynolds number of 0.98 x 10(6) in the Langley 11-inch hypersonic tunnel are presented. The wings had a square plan form, a 5-percent-chord maximum thickness, and diamond, half-diamond, wedge, and half-circular sections.

  1. Results of two tests in the MSFC 14 by 14-inch trisonic wind tunnel, FA 27 (TWT-655) and FA 28 (TWT-656)

    NASA Technical Reports Server (NTRS)

    Braddock, W. F.

    1979-01-01

    Wind tunnel tests were conducted in a 14- inch wind tunnel with a 0.004 scale model of the space shuttle launch vehicle in order to (1) determine the cause and possible aerodynamic alterations required to eliminate the Orbiter rolling moment couple; (2) determine configuration alterations to alleviate the forward Orbiter external tank loads; and (3) provide data to verify previous data.

  2. 49 CFR 604.6 - Government officials on official government business.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Government officials on official government...) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CHARTER SERVICE Exceptions § 604.6 Government officials on official government business. (a) A recipient may provide charter service to government...

  3. 49 CFR 604.6 - Government officials on official government business.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Government officials on official government...) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CHARTER SERVICE Exceptions § 604.6 Government officials on official government business. (a) A recipient may provide charter service to government...

  4. 49 CFR 604.6 - Government officials on official government business.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Government officials on official government...) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CHARTER SERVICE Exceptions § 604.6 Government officials on official government business. (a) A recipient may provide charter service to government...

  5. 49 CFR 604.6 - Government officials on official government business.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Government officials on official government...) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CHARTER SERVICE Exceptions § 604.6 Government officials on official government business. (a) A recipient may provide charter service to government...

  6. 49 CFR 604.6 - Government officials on official government business.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Government officials on official government...) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION CHARTER SERVICE Exceptions § 604.6 Government officials on official government business. (a) A recipient may provide charter service to government...

  7. The development of 8 inch roll-to-plate nanoimprint lithography (8-R2P-NIL) system

    NASA Astrophysics Data System (ADS)

    Lee, Lai Seng; Mohamed, Khairudin; Ooi, Su Guan

    2017-07-01

    Growth in semiconductor and integrated circuit industry was observed in the past decennium of years for industrial technology which followed Moore's law. The line width of nanostructure to be exposed was influenced by the essential technology of photolithography. Thus, it is crucial to have a low cost and high throughput manufacturing process for nanostructures. Nanoimprint Lithography technique invented by Stephen Y. Chou was considered as major nanolithography process to be used in future integrated circuit and integrated optics. The drawbacks of high imprint pressure, high imprint temperature, air bubbles formation, resist sticking to mold and low throughput of thermal nanoimprint lithography on silicon wafer have yet to be solved. Thus, the objectives of this work is to develop a high throughput, low imprint force, room temperature UV assisted 8 inch roll to plate nanoimprint lithography system capable of imprinting nanostructures on 200 mm silicon wafer using roller imprint with flexible mold. A piece of resist spin coated silicon wafer was placed onto vacuum chuck drives forward by a stepper motor. A quartz roller wrapped with a piece of transparent flexible mold was used as imprint roller. The imprinted nanostructures were cured by 10 W, 365 nm UV LED which situated inside the quartz roller. Heat generated by UV LED was dissipated by micro heat pipe. The flexible mold detaches from imprinted nanostructures in a 'line peeling' pattern and imprint pressure was measured by ultra-thin force sensors. This system has imprinting speed capability ranging from 0.19 mm/s to 5.65 mm/s, equivalent to imprinting capability of 3 to 20 pieces of 8 inch wafers per hour. Speed synchronization between imprint roller and vacuum chuck was achieved by controlling pulse rate supplied to stepper motor which drive the vacuum chuck. The speed different ranging from 2 nm/s to 98 nm/s is achievable. Vacuum chuck height was controlled by stepper motor with displacement of 5 nm/step.

  8. Governance versus government: drug consumption rooms in Australia and the UK.

    PubMed

    Zampini, Giulia Federica

    2014-09-01

    To evaluate, through a case study, the extent to which elements of governance and elements of government are influential in determining the implementation or non-implementation of a drugs intervention. Comparative analysis of the case of a drug consumption room in the UK (England) and Australia (New South Wales), including 16 semi-structured interviews with key stakeholders and analysis of relevant documents according to characteristic features of governance and government (power decentralisation, power centralisation, independent self-organising policy networks, use of evidence, top-down steering/directing, legislation). Characteristic features of both governance and government are found in the data. Elements of governance are more prominent in New South Wales, Australia than in England, UK, where government prevails. Government is seen as the most important actor at play in the making, or absence, of drug consumption rooms. Both governance and government are useful frameworks in conceptualising the policy process. The governance narrative risks overlooking the importance of traditional government structures. In the case of drug consumption rooms in the UK and Australia, a focus on government is shown to have been crucial in determining whether the intervention was implemented. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Space shuttle: Aerodynamic characteristics of a 162-inch diameter solid rocket booster with and without strakes

    NASA Technical Reports Server (NTRS)

    Johnson, J. D.; Radford, W. D.; Rampy, J. M.

    1973-01-01

    Tests conducted at NASA-Langley have shown that a small flap or strake can generate a significant amount of lift on a circular cylinder with large cross flow. If strakes are placed on the opposite sides and ends on a circular body, a moment will be produced about the center of mass of the body. The purpose of this test was to determine the static-aerodynamic forces and moments of a 162-inch diameter SRB (PRR) with and without strakes. The total angle-of-attack range of the SRB test was from -10 to 190 degrees. Model roll angles were 0, 45, 90, and 135 degrees with some intermediate angles. The Mach range was from 0.6 to 3.48. The 0.00494 scale model was designated as MSFC No. 449.

  10. Governance and Institutional Autonomy: Governing and Governance in Portuguese Higher Education

    ERIC Educational Resources Information Center

    Magalhaes, Antonio; Veiga, Amelia; Ribeiro, Filipa; Amaral, Alberto

    2013-01-01

    This paper aims at looking at governance instruments beyond managerial technicality. It intends to do so by analysing the impact of governance reforms on the universities autonomy assumed as a regulation instrument to politically steer systems and institutions. The regulation efforts undertaken at the European and national levels reflect a trend…

  11. A one-inch mirror is polished as part of nationwide student project for STARSHINE spacecraft

    NASA Technical Reports Server (NTRS)

    1999-01-01

    The one-inch mirror shown here is one of nearly nine hundred polished by dozens of students teams of elementary, middle and high school students across the nation as part of STARSHINE, a student spacecraft built by the Naval Research Laboratory in Washington, D.C. After being coated with a protective transparent layer of Silicon Dioxide at Hill Air Force Base, they are being mounted on the surface of the spacecraft. STARSHINE is being deployed into a highly inclined low-earth orbit from a Hitchhiker canister on mission STS-96, targeted to launch May 20. After deployment from the Shuttle in May, the spacecraft will reflect flashes of sunlight to observers on the earth during the mission. This twinkling satellite will be naked-eye visible against the star background for about six months during recurring morning and evening twilight periods to student observers around the world.

  12. Acoustic performance of a 50.8-cm (20-inch) diameter variable-pitch fan and inlet. Volume 2: Acoustic data

    NASA Technical Reports Server (NTRS)

    Bilwakesh, K. R.; Clemons, A.; Stimpert, D. L.

    1979-01-01

    Results from acoustic tests on a 50.8 cm (20 inch) QCSEE Under-the-Wing (UTW) engine, variable pitch fan and inlet simulator are tabulated. Tests were run in both forward and reverse thrust mdoes with a bellmouth inlet, five accelerating inlets (one hardwall and four treated), and four low Mach number inlets (one hardwall and three treated). The 1/3 octave-band acoustic data are presented for the model size on the measured 5.2 m (17.0 ft) arc and also data scaled to full QCSEE size 71:20 on a 152.4 m (500 ft) sideline.

  13. Challenges in developing e-government for good governance in North Sumatra

    NASA Astrophysics Data System (ADS)

    Siahaan, AY

    2017-01-01

    E-government as one form of public administration reform in Indonesia is increasingly related to the pursuance of good governance. This paper examines the relationship between of e-government and good governance by utilizing the case study design on the implementation of e-procurement in North Sumatra. It reveals centrality of local politics and business culture in understanding resistances of both local government officials and local business which creates loopholes’ for the practice of ‘bad governance’ in all phases of e-procurement in North Sumatra province. Data transparency does not equate and guarantee the realization of good governance. Public knowledge and understanding on government decision making processes and accountability (process and policy transparency) are central to achieve good governance through e-procurement. E-procurement system does not automatically change organizational and working culture of the implementers and suppliers. This paper provides insight to the attitude and the perception of private sector engage in e-procurement towards government in implementing e-government. Resistance, digital divide and local politics interrelatedly obstruct the realization of pursuing good governance through e-procurement.

  14. Student Government.

    ERIC Educational Resources Information Center

    Morrow, Joyce

    Materials for running a student government program at the junior high school level are provided in three general sections. Section 1 is a description of student government operations. Topics covered include student government responsibilities and activities, student council meeting procedures, parliamentary rules, responsibilities of the…

  15. Renewing governance.

    PubMed

    Loos, Gregory P

    2003-01-01

    Globalization's profound influence on social and political institutions need not be negative. Critics of globalization have often referred to the "Impossible Trinity" because decision-making must 1. respect national sovereignty, 2. develop and implement firm regulation, and 3. allow capital markets to be as free as possible. To many, such goals are mutually exclusive because history conditions us to view policy-making and governance in traditional molds. Thus, transnational governance merely appears impossible because current forms of governance were not designed to provide it. The world needs new tools for governing, and its citizens must seize the opportunity to help develop them. The rise of a global society requires a greater level of generality and inclusion than is found in most policy bodies today. Politicians need to re-examine key assumptions about government. States must develop ways to discharge their regulatory responsibilities across borders and collaborate with neighboring jurisdictions, multilateral bodies, and business. Concepts such as multilateralism and tripartism show great promise. Governments must engage civil society in the spirit of shared responsibility and democratic decision-making. Such changes will result in a renewal of the state's purpose and better use of international resources and expertise in governance.

  16. Experimental performance of an internal resistance heater for Langley 6-inch expansion tube driver

    NASA Technical Reports Server (NTRS)

    Creel, T. R., Jr.

    1972-01-01

    An experimental investigation of the heating characteristics of an internal resistance heating element was conducted in the driver of the Langley 6-inch expansion tube to obtain actual operating conditions, to compare these results to theory, and to determine whether any modification need be made to the heater element. The heater was operated in pressurized helium from 138. MN/sq m to 62.1 MN/sq m. This investigation revealed large temperature variations within the heater element caused primarily by area reductions at insulator locations. These large temperature variations were reduced by welding small tabs over all grooves. Previous predictions of heater element and driver gas temperature were unacceptable so new equations were derived. These equations predict element and gas temperature within 10 percent of the test data when either the constant power cycle or the interrupted power cycle is used. Visual observation of the heater element, when exposed to the atmosphere with power on, resulted in a decision to limit the heater element to 815 K. Experimental shock Mach numbers are in good agreement with theory.

  17. Starting characteristics and combustion performance of magnesium slurry in 6.5-inch-diameter ram-jet engine mounted in connected-pipe facility

    NASA Technical Reports Server (NTRS)

    Gibbs, James B

    1954-01-01

    The starting characteristics and combustion performance of slurry type fuels, consisting of 50 percent magnesium powder in a hydrocarbon carrier, have been investigated in a flight-type, 6.5-inch-diameter ram-jet engine in a connected-pipe facility. Quick, dependable starting of the engine was obtained by the use of a disk which blocked part of the combustor area downstream of the flame holder. Acceptable performance was achieved with a short fuel-air mixing length by the development of a fuel-distribution control sleeve.

  18. Governing drug use through partnerships: Towards a genealogy of government/non-government relations in drug policy.

    PubMed

    Thomas, Natalie; Bull, Melissa; Dioso-Villa, Rachel; Smith, Catrin

    2016-02-01

    Drug policy in Australia is underpinned by the idea of partnerships wherein the non-government sector is one important partner in both delivering services and contributing to policy and decision-making processes. This article presents a genealogy of the concept of government/non-government 'partnerships', tracing its emergence and development within drug policy discourse in Australia. We find that the rise of neo-liberal policies since the 1980s has been a key factor facilitating the emergence of government/non-government 'partnerships' rhetoric in drug policy. Since the 1980s, the role of non-government organisations (NGOs) in drug policy has been articulated in relation to 'community' responsibilisation in contrast to the welfarist reliance on expert intervention. We link the rise of this rhetoric with the neo-liberal turn to governing through community and the individualisation of social problems. Furthermore, although we find that governments on the whole have encouraged the service delivery and policy work of NGOs at least in policy rhetoric, the actions of the state have at times limited the ability of NGOs to perform advocacy work and contribute to policy. Constraints on NGO drug policy work could potentially compromise the responsiveness of drug policy systems by limiting opportunities for innovative policy-making and service delivery. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Transformative environmental governance

    USGS Publications Warehouse

    Chaffin, Brian C.; Garmestani, Ahjond S.; Gunderson, Lance H.; Harm Benson, Melinda; Angeler, David G.; Arnold, Craig Anthony (Tony); Cosens, Barbara; Kundis Craig, Robin; Ruhl, J.B.; Allen, Craig R.

    2016-01-01

    Transformative governance is an approach to environmental governance that has the capacity to respond to, manage, and trigger regime shifts in coupled social-ecological systems (SESs) at multiple scales. The goal of transformative governance is to actively shift degraded SESs to alternative, more desirable, or more functional regimes by altering the structures and processes that define the system. Transformative governance is rooted in ecological theories to explain cross-scale dynamics in complex systems, as well as social theories of change, innovation, and technological transformation. Similar to adaptive governance, transformative governance involves a broad set of governance components, but requires additional capacity to foster new social-ecological regimes including increased risk tolerance, significant systemic investment, and restructured economies and power relations. Transformative governance has the potential to actively respond to regime shifts triggered by climate change, and thus future research should focus on identifying system drivers and leading indicators associated with social-ecological thresholds.

  20. DOD Open Government

    Science.gov Websites

    Skip to main content (Press Enter). DOD Open Government Logo DOD Open Government U.S. Department of Defense Search DOD Open Government: Home Open Government @ DoD Transparency Congressional Inquiries Cooperation Regulatory Program Initiatives FRD Declassification DARPA Open Catalog Contact Us 2016

  1. Leisure, Government and Governance: A Swedish Perspective

    ERIC Educational Resources Information Center

    Lindstrom, Lisbeth

    2011-01-01

    The leisure sector has witnessed a tremendous expansion since 1960. The purpose of this article is to analyse the decisions and goals of Swedish government policy during the period 1962 to 2005. The empirical analysis covers government Propositions and governmental investigations. The fields covered are sports, culture, exercise, tourism and…

  2. Government-owned CubeSat Next Generation Bus Reference Architecture

    DTIC Science & Technology

    2014-08-02

    satellites placed in orbit has been growing exponentially since 1999 as demonstrated by more than 40 CubeSats being launched in the last quarter of 2013...Emhart Helicoil #2(.086)-56 x 0.172 inch long, Nitronic 60 stainless steel. A trade-study was conducted regarding the choice of metric versus SAE

  3. Beyond Professionalisation: Enhancing the Governance Culture for Australian University Governing Boards

    ERIC Educational Resources Information Center

    Baird, Jeanette

    2006-01-01

    This article examines emerging norms of good practice for Australian university governing boards and issues that university governing boards could address to develop effective governance cultures. It firstly considers the ways in which support for many Australian university governing boards has become professionalised over the past decade. At the…

  4. China's Insurance Regulatory Reform, Corporate Governance Behavior and Insurers' Governance Effectiveness.

    PubMed

    Li, Huicong; Zhang, Hongliang; Tsai, Sang-Bing; Qiu, Aichao

    2017-10-17

    External regulation is an important mechanism to improve corporate behavior in emerging markets. China's insurance governance regulation, which began to supervise and guide insurance corporate governance behavior in 2006, has experienced a complex process of reform. This study tested our hypotheses with a sample of 85 firms during 2010-2011, which was obtained by providing a questionnaire to all of China's shareholding insurance companies. The empirical study results generally show that China's insurance governance effectiveness has significantly improved through strict regulation. Insurance corporate governance can improve business acumen and risk-control ability, but no significant evidence was found to prove its influence on profitability, as a result of focusing less attention on governance than on management. State ownership is associated with higher corporate governance effectiveness than non-state ownership. Listed companies tend to outperform non-listed firms, and life insurance corporate governance is more effective than that of property insurers. This study not only contributes to the comprehensive understanding of corporate governance effectiveness but also to the literature by highlighting the effect of corporate governance regulation in China's insurance industry and other emerging economies of the financial sector.

  5. Information at the Nexus: Young People's Perceptions of Government and Government Websites

    ERIC Educational Resources Information Center

    Taylor, Natalie Greene

    2015-01-01

    This dissertation focuses on the perceptions that young people have of federal government websites and of the U.S. government, as well as exploring possible connections between the perceptions of government and government websites. Not only is this a virtually unstudied area of e-government and youth information behavior, but it is also of…

  6. An investigation to determine the static pressure distribution of the 0.00548 scale shuttle solid rocket booster (MSFC model number 468) during reentry in the NASA/MSFC 14 inch trisonic wind tunnel (SA28F)

    NASA Technical Reports Server (NTRS)

    Braddock, W. F.; Streby, G. D.

    1977-01-01

    The results of a pressure test of a .00548 scale 146 inch Space Shuttle Solid Rocket Booster (SRB) with and without protuberances, conducted in a 14 x 14 inch trisonic wind tunnel are presented. Static pressure distributions for the SRB at reentry attitudes and flight conditions were obtained. Local longitudinal and ring pressure distributions are presented in tabulated form. Integration of the pressure data was performed. The test was conducted at Mach numbers of 0.40 to 4.45 over an angle of attack range from 60 to 185 degrees. Roll angles of 0, 45, 90 and 315 degrees were investigated. Reynolds numbers per foot varied for selected Mach numbers.

  7. Governance in Health - The Need for Exchange and Evidence Comment on "Governance, Government, and the Search for New Provider Models".

    PubMed

    Chanturidze, Tata; Obermann, Konrad

    2016-05-17

    Governance in health is cited as one of the key factors in balancing the concerns of the government and public sector with the interests of civil society/private players, but often remains poorly described and operationalized. Richard Saltman and Antonio Duran look at two aspects in the search for new provider models in a context of health markets signalling liberalisation: (i) the role of the government to balance public and private interests and responsibilities in delivering care through modernised governance arrangements, and (ii) the finding that operational complexities may hinder well-designed provider governance models, unless governance reflects country-specific realities. This commentary builds on the discussion by Saltman and Duran, and argues that the concept of governance needs to be clearly defined and operationalized in order to be helpful for policy debate as well as for the development of an applicable framework for performance improvement. It provides a working definition of governance and includes a reflection on the prevailing cultural norms in an organization or society upon which any governance needs to be build. It proposes to explore whether the "evidence-based governance" concept can be introduced to generate knowledge about innovative and effective governance models, and concludes that studies similar to the one by Saltman and Duran can inform this debate. © 2016 by Kerman University of Medical Sciences.

  8. Performance and Flowfield Measurements on a 10-inch Ducted Rotor VTOL UAV

    NASA Technical Reports Server (NTRS)

    Martin, Preston; Tung, Chee

    2004-01-01

    A ducted fan VTOL UAV with a 10-inch diameter rotor was tested in the US Army 7-by 10-Foot Wind Tunnel. The test conditions covered a range of angle of attack from 0 to 110 degrees to the freestream. The tunnel velocity was varied from 0 (simulating a hover condition) to 128 ft/sec in propeller mode. A six-component internal balance measured the aerodynamic loads for a range of model configurations. including the isolated rotor, the isolated duct, and the full configuration of the duct and rotor. For some conditions, hotwire velocity surveys were conducted along the inner and outer surface of the duct and across the downstream wake. In addition, fluorescent oil flow visualization allowed the flow separation patterns inside and outside of the duct to be mapped for a few test conditions. Two different duct shapes were tested to determine the performance effects of leading edge radius. For each duct, a range of rotor tip gap from 1%R to 4.5%R was tested to determine the performance penalty in hover and axial flight. Measured results are presented in terms of hover performance, hover performance in a crosswind, and high angle of attack performance in propeller mode. In each case, the effects of both tip gap and duct leading edge radius are illustrated using measurements. Some of the hover performance issues were also studied using a simple analytical method, and the results agreed with the measurements.

  9. A study of performance and cost improvement potential of the 120 inch (3.05 m) diameter solid rocket motor. Volume 1: Summary report

    NASA Technical Reports Server (NTRS)

    Backlund, S. J.; Rossen, J. N.

    1971-01-01

    A parametric study of ballistic modifications to the 120 inch diameter solid propellant rocket engine which forms part of the Air Force Titan 3 system is presented. 576 separate designs were defined and 24 were selected for detailed analysis. Detailed design descriptions, ballistic performance, and mass property data were prepared for each design. It was determined that a relatively simple change in design parameters could provide a wide range of solid propellant rocket engine ballistic characteristics for future launch vehicle applications.

  10. Room temperature crack growth rates and -20 deg F fracture toughness of welded 1 1/4 inch A-285 steel plate

    NASA Technical Reports Server (NTRS)

    Shannon, J. L., Jr.; Rzasnicki, W.

    1977-01-01

    Data are presented which were developed in support of a structural assessment of NASA-LEWIS' 10-foot by 10-foot supersonic wind tunnel, critical portions of which are fabricated from rolled and welded 1 1/4 inch thick A-285 steel plate. Test material was flame cut from the tunnel wall and included longitudinal and circumferential weld joints. Parent metal, welds, and weld heat affected zone were tested. Tensile strength and fracture toughness were determined at -20 F, the estimated lowest tunnel operating temperature. Crack growth rates were measured at room temperature, where growth rates in service are expected to be highest.

  11. Governance matters: an ecological association between governance and child mortality

    PubMed Central

    Lin, Ro-Ting; Chien, Lung-Chang; Chen, Ya-Mei; Chan, Chang-Chuan

    2014-01-01

    Background Governance of a country may have widespread effects on the health of its population, yet little is known about the effect of governance on child mortality in a country that is undergoing urbanization, economic development, and disease control. Methods We obtained indicators of six dimensions of governance (perceptions of voice and accountability, political stability and absence of violence, government effectiveness, regulatory quality, rule of law, and control of corruption) and national under-5 mortality rates for 149 countries between 1996 and 2010. We applied a semi-parametric generalized additive mixed model to examine associations after controlling for the effects of development factors (urbanization level and economy), disease control factors (hygienic conditions and vaccination rates), health expenditures, air quality, and time. Results Governance, development, and disease control showed clear inverse relations with the under-5 mortality rate (p<0.001). Per unit increases in governance, development, and disease control factors, the child mortality rate had a 0.901-, 0.823-, and 0.922-fold decrease, respectively, at fixed levels of the other two factors. Conclusions In the effort to reduce the global under-5 mortality rate, addressing a country's need for better governance is as important as improvements in development and disease control. PMID:24711600

  12. Governance, Government, and the Search for New Provider Models

    PubMed Central

    Saltman, Richard B.; Duran, Antonio

    2016-01-01

    A central problem in designing effective models of provider governance in health systems has been to ensure an appropriate balance between the concerns of public sector and/or government decision-makers, on the one hand, and of non-governmental health services actors in civil society and private life, on the other. In tax-funded European health systems up to the 1980s, the state and other public sector decision-makers played a dominant role over health service provision, typically operating hospitals through national or regional governments on a command-and-control basis. In a number of countries, however, this state role has started to change, with governments first stepping out of direct service provision and now de facto pushed to focus more on steering provider organizations rather than on direct public management. In this new approach to provider governance, the state has pulled back into a regulatory role that introduces market-like incentives and management structures, which then apply to both public and private sector providers alike. This article examines some of the main operational complexities in implementing this new governance reality/strategy, specifically from a service provision (as opposed to mostly a financing or even regulatory) perspective. After briefly reviewing some of the key theoretical dilemmas, the paper presents two case studies where this new approach was put into practice: primary care in Sweden and hospitals in Spain. The article concludes that good governance today needs to reflect practical operational realities if it is to have the desired effect on health sector reform outcome. PMID:26673647

  13. Governance, Government, and the Search for New Provider Models.

    PubMed

    Saltman, Richard B; Duran, Antonio

    2015-11-03

    A central problem in designing effective models of provider governance in health systems has been to ensure an appropriate balance between the concerns of public sector and/or government decision-makers, on the one hand, and of non-governmental health services actors in civil society and private life, on the other. In tax-funded European health systems up to the 1980s, the state and other public sector decision-makers played a dominant role over health service provision, typically operating hospitals through national or regional governments on a command-and-control basis. In a number of countries, however, this state role has started to change, with governments first stepping out of direct service provision and now de facto pushed to focus more on steering provider organizations rather than on direct public management. In this new approach to provider governance, the state has pulled back into a regulatory role that introduces market-like incentives and management structures, which then apply to both public and private sector providers alike. This article examines some of the main operational complexities in implementing this new governance reality/strategy, specifically from a service provision (as opposed to mostly a financing or even regulatory) perspective. After briefly reviewing some of the key theoretical dilemmas, the paper presents two case studies where this new approach was put into practice: primary care in Sweden and hospitals in Spain. The article concludes that good governance today needs to reflect practical operational realities if it is to have the desired effect on health sector reform outcome. © 2016 by Kerman University of Medical Sciences.

  14. Government and Governance of Regional Triple Helix Interactions

    ERIC Educational Resources Information Center

    Danson, Mike; Todeva, Emanuela

    2016-01-01

    This conceptual paper contributes to the discussion of the role of regional government and regional Triple Helix constellations driving economic development and growth within regional boundaries. The impact of regionalism and subsidiarity on regional Triple Helix constellations, and the questions of governmentality, governance and institutional…

  15. Transformative environmental governance

    EPA Science Inventory

    Transformative governance is an approach to environmental governance that has the capacity to respond to, manage, and trigger regime shifts in coupled social-ecological systems (SESs) at multiple scales. The goal of transformative governance is to actively shift degraded SESs to ...

  16. PHYSICAL REMOVAL OF CRYPTOSPORIDIUM OOCYS, E. COLI, AND BACILLUS SPORES IN DRINKING WATER: PALL CORPORATION MICROZA MICROFILTRATION 3-INCH UNIT, MODEL 4UFD40004-45; AT MANCHESTER, NEW HAMPSHIRE

    EPA Science Inventory

    Verification testing of the Pall Corporation Microza MF S;ystem equipped with a 3-inch filter module, took place between April 30 and August 9, 2000 in Manchester, NH. The source water was drawn from a canal connected to Lake Massabesic, the public reservoir that serves the Town...

  17. 41 CFR 102-34.215 - May Government contractors use Government motor vehicles?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false May Government contractors use Government motor vehicles? 102-34.215 Section 102-34.215 Public Contracts and Property... PROPERTY 34-MOTOR VEHICLE MANAGEMENT Official Use of Government Motor Vehicles § 102-34.215 May Government...

  18. 41 CFR 102-34.215 - May Government contractors use Government motor vehicles?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false May Government contractors use Government motor vehicles? 102-34.215 Section 102-34.215 Public Contracts and Property... PROPERTY 34-MOTOR VEHICLE MANAGEMENT Official Use of Government Motor Vehicles § 102-34.215 May Government...

  19. 41 CFR 102-34.215 - May Government contractors use Government motor vehicles?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false May Government contractors use Government motor vehicles? 102-34.215 Section 102-34.215 Public Contracts and Property... PROPERTY 34-MOTOR VEHICLE MANAGEMENT Official Use of Government Motor Vehicles § 102-34.215 May Government...

  20. 41 CFR 102-34.215 - May Government contractors use Government motor vehicles?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false May Government contractors use Government motor vehicles? 102-34.215 Section 102-34.215 Public Contracts and Property... PROPERTY 34-MOTOR VEHICLE MANAGEMENT Official Use of Government Motor Vehicles § 102-34.215 May Government...

  1. 41 CFR 102-34.215 - May Government contractors use Government motor vehicles?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false May Government contractors use Government motor vehicles? 102-34.215 Section 102-34.215 Public Contracts and Property... PROPERTY 34-MOTOR VEHICLE MANAGEMENT Official Use of Government Motor Vehicles § 102-34.215 May Government...

  2. China’s Insurance Regulatory Reform, Corporate Governance Behavior and Insurers’ Governance Effectiveness

    PubMed Central

    Zhang, Hongliang; Qiu, Aichao

    2017-01-01

    External regulation is an important mechanism to improve corporate behavior in emerging markets. China’s insurance governance regulation, which began to supervise and guide insurance corporate governance behavior in 2006, has experienced a complex process of reform. This study tested our hypotheses with a sample of 85 firms during 2010–2011, which was obtained by providing a questionnaire to all of China’s shareholding insurance companies. The empirical study results generally show that China’s insurance governance effectiveness has significantly improved through strict regulation. Insurance corporate governance can improve business acumen and risk-control ability, but no significant evidence was found to prove its influence on profitability, as a result of focusing less attention on governance than on management. State ownership is associated with higher corporate governance effectiveness than non-state ownership. Listed companies tend to outperform non-listed firms, and life insurance corporate governance is more effective than that of property insurers. This study not only contributes to the comprehensive understanding of corporate governance effectiveness but also to the literature by highlighting the effect of corporate governance regulation in China’s insurance industry and other emerging economies of the financial sector. PMID:29039781

  3. Governance matters: an ecological association between governance and child mortality.

    PubMed

    Lin, Ro-Ting; Chien, Lung-Chang; Chen, Ya-Mei; Chan, Chang-Chuan

    2014-09-01

    Governance of a country may have widespread effects on the health of its population, yet little is known about the effect of governance on child mortality in a country that is undergoing urbanization, economic development, and disease control. We obtained indicators of six dimensions of governance (perceptions of voice and accountability, political stability and absence of violence, government effectiveness, regulatory quality, rule of law, and control of corruption) and national under-5 mortality rates for 149 countries between 1996 and 2010. We applied a semi-parametric generalized additive mixed model to examine associations after controlling for the effects of development factors (urbanization level and economy), disease control factors (hygienic conditions and vaccination rates), health expenditures, air quality, and time. Governance, development, and disease control showed clear inverse relations with the under-5 mortality rate (p<0.001). Per unit increases in governance, development, and disease control factors, the child mortality rate had a 0.901-, 0.823-, and 0.922-fold decrease, respectively, at fixed levels of the other two factors. In the effort to reduce the global under-5 mortality rate, addressing a country's need for better governance is as important as improvements in development and disease control. © The Author 2014. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene.

  4. Modelling University Governance

    ERIC Educational Resources Information Center

    Trakman, Leon

    2008-01-01

    Twentieth century governance models used in public universities are subject to increasing doubt across the English-speaking world. Governments question if public universities are being efficiently governed; if their boards of trustees are adequately fulfilling their trust obligations towards multiple stakeholders; and if collegial models of…

  5. Employee-Retirement Systems of State and Local Governments: 2002 Census of Governments. Volume 4, Number 6, Government Finances

    ERIC Educational Resources Information Center

    US Department of Commerce, 2004

    2004-01-01

    A census of governments is taken at 5-year intervals as required by law under title 13, United States Codes, Section 161. This 2002 census, similar to those taken since 1957, covers three major subject fields: government organization; public employment; and government finances. This document contains six parts that cover the entire range of state…

  6. Lowell Observatory's 24-inch Clark Refractor: Its History and Renovation

    NASA Astrophysics Data System (ADS)

    Schindler, Kevin; Nye, Ralph; Rosenthal, Peter

    2016-01-01

    In 1895, Percival Lowell hired eminent telescope maker Alvan G. Clark to build a 24-inch refractor. Lowell intended the telescope intitally for observing Mars in support of his controversial theories about life on that planet. Clark finished the telescope within a year and at a cost of $20,000. Lowell and his staff of assistants and astronomers began observing through it on July 23, 1896, setting off a long and productive career for the telescope.While Lowell's Mars studies dominated early work with the Clark, V.M. Slipher by the 1910s was using it to observe planetary rotations and atmospheric compositions. He soon revolutionized spectroscopic studies, gathering excruciatingly long spectra - some in excess of 40 hours - of the so-called white nebula and determining startling radial velocities, evidence of an expanding universe. In the 1960s, scientists and artists teamed up on the Clark and created detailed lunar maps in support of the Apollo program.In recent decades, the Clark has played a central role in the education programs at Lowell, with general public audiences, students, and private groups all taking advantage of this unique resource.With this nearly 120 years of contant use, the Clark had been wearing down in recent years. The telescope was becoming more difficult to move, old electrical wiring in the dome was a fire hazard, and many of the telescope's parts needed to be repaired or replaced.In 2013, Lowell Observatory began a fundraising campaign, collecting $291,000 to cover the cost of dome and telescope renovation. Workers removed the entire telescope mount and tube assembly from the dome, examining every part from tube sections to individuals screws. They also stabilized the dome, adding a water vapor barrier and new outer wall while reinforcing the upper dome. The project lasted from January, 2014 through August, 2015. The facility reopened for daytime tours in September, 2015 and evening viewing the following month.

  7. Remaking Governance.

    ERIC Educational Resources Information Center

    Carver, John

    2000-01-01

    The Policy Governance model's philosophical foundations lie in Rousseau's social contract, Greenleaf's servant-leadership, and modern management theory. Policy Governance stresses primacy of the owner-representative role; full-board authority; superintendents as chief executive officers; authoritative prescription of "ends," bounded…

  8. Governance of Higher Education--Implementation of Project Governance

    ERIC Educational Resources Information Center

    Macheridis, Nikos

    2017-01-01

    This article focuses on coordination between governance actors in higher education. The object of the study is a department at a public university, seen as a multi-project environment. The purpose of this article is to illustrate and analyze project governance as a tool that allows departmental management to coordinate with the authorities, the…

  9. Applying IT Governance Concepts and Elements to Knowledge Governance: An Initial Approach

    NASA Astrophysics Data System (ADS)

    Rouyet, Juan Ignacio; Joyanes, Luis

    As the era of knowledge-based economy is emerging, the importance of knowledge governance is gradually increasing. The question of how the governance mechanisms influence on the knowledge transactions is becoming increasingly relevant. However, the theoretical approaches have yet to solve outstanding issues, such as how the the micro-level governance mechanisms influence the knowledge processes or what kind of organizational hazard could decrease the benefits form the knowledge processes. Furthermore, the deployment of empirical studies to address the issues mentioned is arguably needed. This paper proposes a knowledge governance framework to assist effectively in the implementation of governance mechanisms for knowledge management processes. Additionally, it shows how this may be implented in a knowledge-intensive firm and proposes specific structures and governance mechanisms.

  10. The Sproul 24-Inch Refractor: Entering A New Century of Research

    NASA Astrophysics Data System (ADS)

    Augensen, H. J.; Heintz, W. D.; Schultz, M. R.; Hassel, G. E., Jr.; Inoue, S.; Howanski, R.; Fanning, T.

    1999-05-01

    The Sproul Observatory, located in Swarthmore, Pennsylvania, has been in operation since 1912. Its major research instrument is a 24-inch, f/18 refracting telescope with lenses made by Brashear. The research conducted during the 20th century concentrated on obtaining parallaxes of nearby stars and also on the exploration of visual double and multiple star systems. The Sproul plate vault contains some 90,000 plates, from which 1500 stellar parallaxes, or about 10% of the current parallax database, have been extracted. Heintz made 54,000 observations (including those made with other telescopes) of double stars over 43 years (47,500 by micrometer, 6500 by photography), resulting in the calculation of 500 orbits and 900 newly discovered double stars. Photographic observations ceased in 1994. In 1998 the refractor was fitted with an Apogee AP-6 CCD camera, which contains a Kodak KAF 1000 chip with 1024 x 1024 pixel array, and gives a 0.45 arcseconds per pixel image scale and 8 x 8 arcminute field of view at the focal plane. The camera is operated using PMIS software. A filter wheel constructed by ISI Systems and attached to the camera contains 5-mm thick B, V, and R filters. The Sproul telescope has now been given a new task: the study of variable stars. Currently under investigation are RV Tauri and semiregular variables, SX Phoenicis stars, and also stars which are suspected of being variable, taken from the New Catalogue of Stars Suspected of Variability of Light, Nauka Publishing, Moscow 1982. Thus far, the most convincing cases for variability are NSV 656 (irregular?), 1098 (large amplitude, probably Mira type), 1470 (short P, eclipsing?), and 13514 (P 105d?). This work has been supported by a Provost Grant from Swarthmore College and by the Howard Hughes Medical Institute-Supported Summer Research in Science Program.

  11. X-33 (Rev-F) Aeroheating Results of Test 6770 in NASA Langley 20-Inch Mach 6 Air Tunnel

    NASA Technical Reports Server (NTRS)

    Berry, Scott A.; Horvath, Thomas J.; Kowalkowski, Matthew K.; Liechty, Derek S.

    1999-01-01

    Aeroheating characteristics of the X-33 Rev-F configuration have been experimentally examined in the Langley 20-Inch Mach 6 Air Tunnel (Test 6770). Global surface heat transfer distributions, surface streamline patterns, and shock shapes were measured on a 0.013-scale model at Mach 6 in air. Parametric variations include angles-of-attack of 20-deg, 30-deg, and 40-deg; Reynolds numbers based on model length of 0.9 to 4.9 million; and body-flap deflections of 10-deg and 20-deg. The effects of discrete roughness elements on boundary layer transition, which included trip height, size, and location, both on and off the windward centerline, were investigated. This document is intended to serve as a quick release of preliminary data to the X-33 program; analysis is limited to observations of the experimental trends in order to expedite dissemination.

  12. 48 CFR 225.7303-3 - Government-to-government agreements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Government-to-government agreements. 225.7303-3 Section 225.7303-3 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION Acquisitions for Foreign...

  13. University Governance: Governing Bodies as Providers and Users of Annual Reports

    ERIC Educational Resources Information Center

    Dixon, Keith; Coy, David

    2007-01-01

    Where members of governing bodies of universities stand in relation to their institution's annual reports is discussed in the broader context of trends in university governance. Data were collected from members of the governing councils of New Zealand's eight universities using questionnaire surveys in 1993 and 2001. During this interval, a marked…

  14. Smart governance for smart city

    NASA Astrophysics Data System (ADS)

    Mutiara, Dewi; Yuniarti, Siti; Pratama, Bambang

    2018-03-01

    Some of the local government in Indonesia claimed they already created a smart city. Mostly the claim based of IT utilization for their governance. In general, a smart city definition is to describe a developed urban area that creates sustainable economic development and high quality of life by excelling in multiple key; economy, mobility, environment, people, living, and government. For public services, the law guarantees good governance by setting the standard for e-government implicitly including for local government or a city. Based on the arguments, this research tries to test the condition of e-government of the Indonesian city in 34 provinces. The purpose is to map e-government condition by measuring indicators of smart government, which are: transparent governance and open data for the public. This research is departing from public information disclosure law and to correspond with the existence law. By examining government transparency, the output of the research can be used to measure the effectiveness of public information disclosure law and to determine the condition of e-government in local government in which as part of a smart city.

  15. Architecture Governance: The Importance of Architecture Governance for Achieving Operationally Responsive Ground Systems

    NASA Technical Reports Server (NTRS)

    Kolar, Mike; Estefan, Jeff; Giovannoni, Brian; Barkley, Erik

    2011-01-01

    Topics covered (1) Why Governance and Why Now? (2) Characteristics of Architecture Governance (3) Strategic Elements (3a) Architectural Principles (3b) Architecture Board (3c) Architecture Compliance (4) Architecture Governance Infusion Process. Governance is concerned with decision making (i.e., setting directions, establishing standards and principles, and prioritizing investments). Architecture governance is the practice and orientation by which enterprise architectures and other architectures are managed and controlled at an enterprise-wide level

  16. Shared Governance.

    ERIC Educational Resources Information Center

    Mortenson, Robert A.

    The MINK (Missouri, Iowa, Nebraska, and Kansas) Network Educational Resources Center is a regional, collaborative effort among Teacher Corps Projects and a model of shared governance to improve learning environments and understanding among teacher educators. The governance of this group comes from a Board of Directors comprised of project…

  17. Fabrication of 2-inch nano patterned sapphire substrate with high uniformity by two-beam laser interference lithography

    NASA Astrophysics Data System (ADS)

    Dai, LongGui; Yang, Fan; Yue, Gen; Jiang, Yang; Jia, Haiqiang; Wang, Wenxin; Chen, Hong

    2014-11-01

    Generally, nano-scale patterned sapphire substrate (NPSS) has better performance than micro-scale patterned sapphire substrate (MPSS) in improving the light extraction efficiency of LEDs. Laser interference lithography (LIL) is one of the powerful fabrication methods for periodic nanostructures without photo-masks for different designs. However, Lloyd's mirror LIL system has the disadvantage that fabricated patterns are inevitably distorted, especially for large-area twodimensional (2D) periodic nanostructures. Herein, we introduce two-beam LIL system to fabricate consistent large-area NPSS. Quantitative analysis and characterization indicate that the high uniformity of the photoresist arrays is achieved. Through the combination of dry etching and wet etching techniques, the well-defined NPSS with period of 460 nm were prepared on the whole sapphire substrate. The deviation is 4.34% for the bottom width of the triangle truncated pyramid arrays on the whole 2-inch sapphire substrate, which is suitable for the application in industrial production of NPSS.

  18. 31 CFR 575.304 - Entity of the Government of Iraq; Iraqi Government entity.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Entity of the Government of Iraq; Iraqi Government entity. 575.304 Section 575.304 Money and Finance: Treasury Regulations Relating to... SANCTIONS REGULATIONS General Definitions § 575.304 Entity of the Government of Iraq; Iraqi Government...

  19. Governing the Governors: A Case Study of College Governance in English Further Education

    ERIC Educational Resources Information Center

    Gleeson, Denis; Abbott, Ian; Hill, Ron

    2011-01-01

    This paper addresses the nature of governors in the governance of further education colleges in an English context. It explores the complex relationship between governors (people/agency), government (policy/structure) and governance (practice), in a college environment. While recent research has focused on the governance of schooling and higher…

  20. Governing Academic Medical Center Systems: Evaluating and Choosing Among Alternative Governance Approaches.

    PubMed

    Chari, Ramya; O'Hanlon, Claire; Chen, Peggy; Leuschner, Kristin; Nelson, Christopher

    2018-02-01

    The ability of academic medical centers (AMCs) to fulfill their triple mission of patient care, medical education, and research is increasingly being threatened by rising financial pressures and resource constraints. Many AMCs are, therefore, looking to expand into academic medical systems, increasing their scale through consolidation or affiliation with other health care systems. As clinical operations grow, though, the need for effective governance becomes even more critical to ensure that the business of patient care does not compromise the rest of the triple mission. Multi-AMC systems, a model in which multiple AMCs are governed by a single body, pose a particular challenge in balancing unity with the needs of component AMCs, and therefore offer lessons for designing AMC governance approaches. This article describes the development and application of a set of criteria to evaluate governance options for one multi-AMC system-the University of California (UC) and its five AMCs. Based on a literature review and key informant interviews, the authors identified criteria for evaluating governance approaches (structures and processes), assessed current governance approaches using the criteria, identified alternative governance options, and assessed each option using the identified criteria. The assessment aided UC in streamlining governance operations to enhance their ability to respond efficiently to change and to act collectively. Although designed for UC and a multi-AMC model, the criteria may provide a systematic way for any AMC to assess the strengths and weaknesses of its governance approaches.

  1. Reinventing Government.

    ERIC Educational Resources Information Center

    Osborne, David T.

    1993-01-01

    Throughout all levels of American government, a shift is taking place from the rigid, wasteful, centralized bureaucracies of the industrial era to the more flexible, entrepreneurial, decentralized government needed to succeed in today's world. This shift has been brought about by an unprecedented, ongoing fiscal crisis that has created a sudden…

  2. Forced Boundary-Layer Transition on X-43 (Hyper-X) in NASA LaRC 20-Inch Mach 6 Air Tunnel

    NASA Technical Reports Server (NTRS)

    Berry, Scott A.; DiFulvio, Michael; Kowalkowski, Matthew K.

    2000-01-01

    Aeroheating and boundary layer transition characteristics for the X-43 (Hyper-X) configuration have been experimentally examined in the Langley 20-Inch Mach 6 Air Tunnel. Global surface heat transfer distributions, and surface streamline patterns were measured on a 0.333-scale model of the Hyper-X forebody. Parametric variations include angles-of-attack of 0-deg, 2-deg, and 4-deg; Reynolds numbers based on model length of 1.2 to 15.4 million; and inlet cowl door both open and closed. The effects of discrete roughness elements on the forebody boundary layer, which included variations in trip configuration and height, were investigated. This document is intended to serve as a release of preliminary data to the Hyper-X program; analysis is limited to observations of the experimental trends in order to expedite dissemination.

  3. Obesity and government.

    PubMed

    Kahan, Scott; Zvenyach, Tracy

    2016-10-01

    Despite much effort, obesity prevalence and disease severity continues to worsen. The purpose of this review is to describe the leading government supported food and nutrition interventions and policies to prevent and address obesity in the USA. The review also summarizes obesity interventions and policies that the government plays a role in, but further development is warranted. The government's role in obesity has largely focused on interventions and policies such as national surveillance, obesity education and awareness, grant-based food subsidy programs, zoning for food access, school-based nutrition programs, dietary guidelines, nutrition labeling, and food marketing and pricing policies. The government has played a lesser role in obesity interventions and policies that provide access to evidence-based obesity care to people affected by the disease. Given the magnitude of the obesity epidemic, the government should explore multiple evidence-based interventions and policies across prevention and clinical care.

  4. Governance: Blending Bureaucratic Rules with Day to Day Operational Realities Comment on "Governance, Government, and the Search for New Provider Models".

    PubMed

    Chinitz, David P

    2016-05-31

    Richard Saltman and Antonio Duran take up the challenging issue of governance in their article "Governance, Government and the Search for New Provider Models," and use two case studies of health policy changes in Sweden and Spain to shed light on the subject. In this commentary, I seek to link their conceptualization of governance, especially its interrelated roles at the macro, meso, and micro levels of health systems, with the case studies on which they report. While the case studies focus on the shifts in governance between the macro and meso levels and their impacts on achievement of desired policy outcomes, they also highlight the need to better integrate the dynamics of day to day operations within micro organizations into the overall governance picture. © 2016 by Kerman University of Medical Sciences.

  5. Neutron Reference Benchmark Field Specification: ACRR 44 Inch Lead-Boron (LB44) Bucket Environment (ACRR-LB44-CC-32-CL).

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vega, Richard Manuel; Parma, Edward J.; Griffin, Patrick J.

    2015-07-01

    This report was put together to support the International Atomic Energy Agency (IAEA) REAL- 2016 activity to validate the dosimetry community’s ability to use a consistent set of activation data and to derive consistent spectral characterizations. The report captures details of integral measurements taken in the Annular Core Research Reactor (ACRR) central cavity with the 44 inch Lead-Boron (LB44) bucket, reference neutron benchmark field. The field is described and an “a priori” calculated neutron spectrum is reported, based on MCNP6 calculations, and a subject matter expert (SME) based covariance matrix is given for this “a priori” spectrum. The results ofmore » 31 integral dosimetry measurements in the neutron field are reported.« less

  6. Some mechanical properties of small specimens cut from 1.79-inch-thick southern pine dried for 6 hours at 300°F or for 5 days at 180°F- A Comparison

    Treesearch

    P. Koch; W.L. Wellford

    1978-01-01

    Small specimens cut from 1.79-inch-thick southern pine dried from green condition for 6 hours at a dry-bulb temperature of 300 F suffered no diminution in the mechanical properties determined, when compared to matched wood dried for 5 days at 180 F.

  7. KENNEDY SPACE CENTER, FLA. - Mobile Launcher Platform (MLP) number 3 and a set of twin solid rocket boosters, atop the crawler-transporter, inch along the crawlerway in support of the second engineering analysis vibration test on the crawler and MLP. The view reveals the river gravel surface that is 4 inches thick on the straightaway sections and 8 inches thick on curves. The crawler is moving at various speeds up to 1 mph in an effort to achieve vibration data gathering goals as it leaves the VAB, travels toward Launch Pad 39A and then returns. The boosters are braced at the top for stability. The primary purpose of these rollout tests is to gather data to develop future maintenance requirements on the transport equipment and the flight hardware. Various parts of the MLP and crawler transporter have been instrumented with vibration data collection equipment.

    NASA Image and Video Library

    2003-11-21

    KENNEDY SPACE CENTER, FLA. - Mobile Launcher Platform (MLP) number 3 and a set of twin solid rocket boosters, atop the crawler-transporter, inch along the crawlerway in support of the second engineering analysis vibration test on the crawler and MLP. The view reveals the river gravel surface that is 4 inches thick on the straightaway sections and 8 inches thick on curves. The crawler is moving at various speeds up to 1 mph in an effort to achieve vibration data gathering goals as it leaves the VAB, travels toward Launch Pad 39A and then returns. The boosters are braced at the top for stability. The primary purpose of these rollout tests is to gather data to develop future maintenance requirements on the transport equipment and the flight hardware. Various parts of the MLP and crawler transporter have been instrumented with vibration data collection equipment.

  8. Governing Knowledge: The Formalization Dilemma in the Governance of the Public Sciences

    ERIC Educational Resources Information Center

    Woelert, Peter

    2015-01-01

    This paper offers a conceptually novel contribution to the understanding of the distinctive governance challenges arising from the increasing reliance on formalized knowledge in the governance of research activities. It uses the current Australian research governance system as an example--a system which exhibits a comparatively strong degree of…

  9. Digital government and public health.

    PubMed

    Fountain, Jane E

    2004-10-01

    Digital government is typically defined as the production and delivery of information and services inside government and between government and the public using a range of information and communication technologies. Two types of government relationships with other entities are government-to-citizen and government-to-government relationships. Both offer opportunities and challenges. Assessment of a public health agency's readiness for digital government includes examination of technical, managerial, and political capabilities. Public health agencies are especially challenged by a lack of funding for technical infrastructure and expertise, by privacy and security issues, and by lack of Internet access for low-income and marginalized populations. Public health agencies understand the difficulties of working across agencies and levels of government, but the development of new, integrated e-programs will require more than technical change - it will require a profound change in paradigm.

  10. A Primer on E-Government: Sectors, Stages, Opportunities, and Challenges of Online Governance

    DTIC Science & Technology

    2003-01-28

    government. Some observers define e-government in terms of specific actions such as using a kiosk to receive job information, or applying for Social ...participation, and governance by transforming internal and external relationships through technology, the Internet, and new media .” E-government...applying for Social Security benefits through a web site, or creating shared databases for multiple agencies, as examples. Other observers define e

  11. An off-the-shelf guider for the Palomar 200-inch telescope: interfacing amateur astronomy software with professional telescopes for an easy life

    NASA Astrophysics Data System (ADS)

    Clarke, Fraser; Lynn, James; Thatte, Niranjan; Tecza, Matthias

    2014-08-01

    We have developed a simple but effective guider for use with the Oxford-SWIFT integral field spectrograph on the Palomar 200-inch telescope. The guider uses mainly off-the-shelf components, including commercial amateur astronomy software to interface with the CCD camera, calculating guiding corrections, and send guide commands to the telescope. The only custom piece of software is an driver to provide an interface between the Palomar telescope control system and the industry standard 'ASCOM' system. Using existing commercial software provided a very cheap guider (<$5000) with minimal (<15 minutes) commissioning time. The final system provides sub-arcsecond guiding, and could easily be adapted to any other professional telescope

  12. 'Governance of' and 'Governance by': implementing a clinical governance framework in an area mental health service.

    PubMed

    O'Connor, Nick; Paton, Michael

    2008-04-01

    A framework developed to promote the understanding and application of clinical governance principles in an area mental health service is described. The framework is operationalized through systems, processes, roles and responsibilities. The development of an explicit and operationalizable framework for clinical governance arose from the authors' experiences in leading and managing mental health services. There is a particular emphasis on improvement of quality of care and patient safety. The framework is informed by recent developments in thinking about clinical governance, including key documents from Australia and the United Kingdom. The operational nature of the framework allows for key components of clinical governance to be described explicitly, communicated effectively, and continually tested and improved. Further consideration and assessment of the value of differing approaches to this task are required. For example, a general, illustrative approach to raise clinician awareness can be contrasted with prescriptive and specified approaches which progressively encompass the many functions and processes of a mental health service. Mental health clinicians and managers can be guided by a framework that will ensure safe, high quality and continually improving processes of care.

  13. Forced Boundary-Layer Transition on X-43 (Hyper-X) in NASA LaRC 31-Inch Mach 10 Air Tunnel

    NASA Technical Reports Server (NTRS)

    Berry, Scott A.; DiFulvio, Michael; Kowalkowski, Matthew K.

    2000-01-01

    Aeroheating and boundary layer transition characteristics for the X-43 (Hyper-X) configuration have been experimentally examined in the Langley 31-Inch Mach 10 Air Tunnel. Global surface heat transfer distributions, and surface streamline patterns were measured on a 0.333-scale model of the Hyper-X forebody. Parametric variations include angles-of-attack of 0-deg, 2-deg, 3-deg, and 4-deg; Reynolds numbers based on model length of 1.2 to 5.1 million; and inlet cowl door both open and closed. The effects of discrete roughness elements on the forebody boundary layer, which included variations in trip configuration and height, were investigated. This document is intended to serve as a release of preliminary data to the Hyper-X program; analysis is limited to observations of the experimental trends in order to expedite dissemination.

  14. Head-disk interface nanotribology for Tbit/inch2 recording densities: near-contact and contact recording

    NASA Astrophysics Data System (ADS)

    Vakis, Antonis I.; Polycarpou, Andreas A.

    2010-06-01

    In the effort to achieve Tbit/inch2 recording densities, thermal fly-height control (TFC) nanotechnology was developed to effectively reduce the clearance (which is of the order of a few nanometres) at the head-disk interface (HDI) of hard-disk drives. In this work, we present a model of the HDI that can predict the dynamic flying and nanotribological contacting behaviour, allowing for accurate predictions and characterization of the operating regime as a function of TFC actuation. A geometric model for TFC is presented and an improved definition of contact at the interface is developed in the presence of nanoscale topographical roughness and dynamic microwaviness. A new methodology is proposed for the calculation of the nominal area of contact, which affects both near- and at-contact behaviour, while the stiffening of the air bearing force with TFC actuation is also accounted for. Slider behaviour is analysed by quantifying the approach, jump-to-contact, lubricant and solid contact regimes of operation and identifying the critical and optimum TFC actuations. The feasibility of near-contact, light molecularly thin lubricant contact versus solid contact recording is explored under the effect of the interfacial forces and stresses present at the HDI. The clearance and the state of vibrations are analysed and design guidelines are proposed for improved performance.

  15. 3 CFR - Government Contracting

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 3 The President 1 2010-01-01 2010-01-01 false Government Contracting Presidential Documents Other Presidential Documents Memorandum of March 4, 2009 Government Contracting Memorandum for the Heads of Executive Departments and Agencies The Federal Government has an overriding obligation to American taxpayers. It should...

  16. Government Positions for Physicists.

    NASA Astrophysics Data System (ADS)

    Seiler, David

    2006-03-01

    There are a number of government agencies that employ physicists in a wide variety of jobs -- from student internships to post docs to full time staff positions. You can do real, creative, fore-front physics or pursue a wide range of leadership positions. The possibilities are almost unlimited and so is the impact your work can have on the government, academia, and industry. So how do you go about finding a government job? What qualities or abilities are deemed valuable? What are the advantages and disadvantages to working in the government? I will bring some personal experiences and observations from working in the government (one year as a rotator at the National Science Foundation in the Division of Materials Research and almost 18 years at the National Institute of Standards and Technology, both as a Group Leader and a Division Chief) to bear on these questions and more. Prior to my government career I was a physics professor pursuing research and teaching in academia.

  17. Government - contractor interaction

    NASA Technical Reports Server (NTRS)

    Thomas, D. M.

    1983-01-01

    The development of the Administrative Contracting Officer represents an advance in the Government system of contract management because it provides an individual with knowledge, time, and a specialized function to insure performance of Government contracts. However, the development has created a dichotomy between the award and the post-award function which increases the adversary relationship with Government contractors. This paper advocates that this adversary relationship can be decreased if PCOs and ACOs are provided with opportunities to serve in the assignments of the other.

  18. Investigation of a 4.5-Inch-Mean-Diameter Two-Stage Axial-Flow Turbine Suitable for Auxiliary Power Drives

    NASA Technical Reports Server (NTRS)

    Wong, Robert Y.; Monroe, Daniel E.

    1959-01-01

    The design and experimental investigation of a 4.5-inch-mean-diameter two-stage turbine are presented herein and used to study the effect of size on the efficiency of turbines in the auxiliary power drive class. The results of the experimental investigation indicated that design specific work was obtained at design speed at a total-to-static efficiency of 0.639. At design pressure ratio, design static-pressure distribution through the turbine was obtained with an equivalent specific work output of 33.2 Btu per pound and an efficiency of 0.656. It was found that, in the design of turbines in the auxiliary power drive class, Reynolds number plays an important part in the selection of the design efficiency. Comparison with theoretical efficiencies based on a loss coefficient and velocity diagrams are presented. Close agreement was obtained between theory and experiment when the loss coefficient was adjusted for changes in Reynolds number to the -1/5 power.

  19. Calibration of the 13- by 13-inch adaptive wall test section for the Langley 0.3-meter transonic cryogenic tunnel

    NASA Technical Reports Server (NTRS)

    Mineck, Raymond E.; Hill, Acquilla S.

    1990-01-01

    A 13 by 13 inch adaptive wall test section was installed in the 0.3 Meter Transonic Cryogenic Tunnel circuit. This new test section is configured for 2-D airfoil testing. It has four solid walls. The top and bottom walls are flexible and movable whereas the sidewalls are rigid and fixed. The wall adaptation strategy employed requires the test section wall shapes associated with uniform test section Mach number distributions. Calibration tests with the test section empty were conducted with the top and bottom walls linearly diverged to approach a uniform Mach number distribution. Pressure distributions were measured in the contraction cone, the test section, and the high speed diffuser at Mach numbers from 0.20 to 0.95 and Reynolds numbers from 10 to 100 x 10 (exp 6)/per foot.

  20. Governing Underfunded Tribal Colleges.

    ERIC Educational Resources Information Center

    Ambler, Marjane

    1996-01-01

    Discusses tribal colleges' struggles with lower-than-promised federal appropriations, including difficulties related to governance and planning and the threat of closure. Describes possible alternate means of funding, such as forward funding one year in advance, funding from state governments, and private funding from tribal governments or private…

  1. State Governance Action Report, 2007

    ERIC Educational Resources Information Center

    Association of Governing Boards of Universities and Colleges, 2007

    2007-01-01

    This paper presents the State Governance Action Report for 2007. Compiled in this report are state policy developments, including legislation, commissions, and studies, affecting the structure, responsibilities, and operations of public higher education governing boards and institutionally related foundations. Governance and governance-related…

  2. Growth of magnesium diboride films on 2 inch diameter copper discs by hybrid physical–chemical vapor deposition

    DOE PAGES

    Withanage, Wenura K.; Xi, X. X.; Nassiri, Alireza; ...

    2017-02-16

    Here, magnesium diboride (MgB 2) coating is a potential candidate to replace bulk niobium (Nb) for superconducting radio frequency cavities due to the appealing superconducting properties of MgB 2. MgB 2 coating on copper may allow cavity operation near 20–25 K as a result of the high transition temperature (T c) of MgB 2 and excellent thermal conductivity of Cu. We have grown MgB 2 films on 2 inch diameter Cu discs by hybrid physical–chemical vapor deposition for radio frequency characterization. Structural and elemental analyses showed a uniform MgB 2 coating on top of a Mg–Cu alloy layer with occasionalmore » intrusion of Mg–Cu alloy regions. High T c values of around 37 K and high critical current density (J c) on the order of 107 A cm –2 at zero field were observed. Radio frequency measurements at 11.4 GHz confirmed a high T c and showed a quality factor (Q 0) much higher than for Cu and close to that of Nb.« less

  3. Techniques for the Installation of Internal Fiber Optic Instrumentation on an 11-Inch Hybrid Motor Test Bed

    NASA Technical Reports Server (NTRS)

    Cornelius, Michael; Smartt, Ziba; Henrie, Vaughn; Johnson, Mont

    2003-01-01

    The recent developments in Fabry-Perot fiber optic instruments have resulted in accurate transducers with some of the physical characteristics required for use in obtaining internal data from solid rocket motors. These characteristics include small size, non-electrical excitation, and immunity to electro-magnetic interference. These transducers have not been previously utilized in this environment due to the high temperatures typically encountered. A series of tests were conducted using a 1 1-Inch Hybrid test bed to develop installation techniques that will allow the fiber optic instruments to survive and obtain data for a short period of time following the motor ignition. The installation methods developed during this test series have the potential to allow data to be acquired in the motor chamber, propellant bore, and nozzle during the ignition transient. These measurements would prove to be very useful in the characterization of current motor designs and provide insight into the requirements for further refinements. The process of developing these protective methods and the installation techniques used to apply them is summarized.

  4. Growth of magnesium diboride films on 2 inch diameter copper discs by hybrid physical–chemical vapor deposition

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Withanage, Wenura K.; Xi, X. X.; Nassiri, Alireza

    Here, magnesium diboride (MgB 2) coating is a potential candidate to replace bulk niobium (Nb) for superconducting radio frequency cavities due to the appealing superconducting properties of MgB 2. MgB 2 coating on copper may allow cavity operation near 20–25 K as a result of the high transition temperature (T c) of MgB 2 and excellent thermal conductivity of Cu. We have grown MgB 2 films on 2 inch diameter Cu discs by hybrid physical–chemical vapor deposition for radio frequency characterization. Structural and elemental analyses showed a uniform MgB 2 coating on top of a Mg–Cu alloy layer with occasionalmore » intrusion of Mg–Cu alloy regions. High T c values of around 37 K and high critical current density (J c) on the order of 107 A cm –2 at zero field were observed. Radio frequency measurements at 11.4 GHz confirmed a high T c and showed a quality factor (Q 0) much higher than for Cu and close to that of Nb.« less

  5. Growth of magnesium diboride films on 2 inch diameter copper discs by hybrid physical–chemical vapor deposition

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Withanage, Wenura K.; Xi, X. X.; Nassiri, Alireza

    Magnesium diboride (MgB2) coating is a potential candidate to replace bulk niobium (Nb) for superconducting radio frequency cavities due to the appealing superconducting properties of MgB2. MgB2 coating on copper may allow cavity operation near 20–25 K as a result of the high transition temperature (T c) of MgB2 and excellent thermal conductivity of Cu. We have grown MgB2 films on 2 inch diameter Cu discs by hybrid physical–chemical vapor deposition for radio frequency characterization. Structural and elemental analyses showed a uniform MgB2 coating on top of a Mg–Cu alloy layer with occasional intrusion of Mg–Cu alloy regions. High Tmore » c values of around 37 K and high critical current density (J c) on the order of 107 A cm-2 at zero field were observed. Radio frequency measurements at 11.4 GHz confirmed a high T c and showed a quality factor (Q 0) much higher than for Cu and close to that of Nb.« less

  6. SECM half-inch tethered endoscopic capsule (HITEC) for esophageal imaging (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Kang, DongKyun; Kim, Minkyu; Carruth, Robert W.; Lu, Weina; Wu, Tao; Alali, Sanaz; Do, Dukho; Soomro, Amna R.; Grant, Catriona N.; Tiernan, Aubrey R.; Rosenberg, Mireille; Nishioka, Norman S.; Tearney, Guillermo J.

    2016-03-01

    Spectrally encoded confocal microscopy (SECM) is a high-speed confocal endomicroscopy technology that can image extremely large regions of human tissue at cellular resolution within a short imaging time. Previously, we have developed a 7-mm-diameter SECM endoscopic capsule and successfully demonstrated imaging of human esophagus in vivo. Even though we were able to successfully capture images with the previous capsule, it suffered from two limitations: (1) the capsule had a small diameter, which provided a limited contact between SECM capsule and esophagus; and (2) speckle noise in SECM images made it challenging to appreciate cellular features. In this paper, we present a new SECM capsule, termed SECM half-inch tethered endoscopic capsule (HITEC), which addresses the two aforementioned technical challenges. With the SECM HITEC, a dual-clad fiber was used to reduce the speckle noise. Miniature GRIN optics was used to increase the NA of the fiber from 0.09 to 0.25, which made it possible to build a SECM capsule with large diameter (12.7 mm) while maintaining a short rigid length (22 mm). A water-immersion objective lens was custom designed and manufactured to provide high NA of 0.7. We have manufactured the SECM HITEC catheter and tested its optical and mechanical performance. Lateral and axial resolution was measured as 1.2 µm and 13 µm, respectively. We have imaged swine esophageal tissues ex vivo, and SECM images clearly visualized cell nuclei. Non-uniform rotational distortion (NURD) was small, less than 5%. Preliminary results suggest that SECM HITEC provides sufficient optical and mechanical performance for tissue imaging. In a future clinical study, we will test the feasibility of utilizing SECM HITEC for improved cellular imaging human of the human esophagus in vivo.

  7. Preliminary performance of a 4.97-inch radial turbine operating in a Brayton power system with a helium-xenon gas mixture

    NASA Technical Reports Server (NTRS)

    Leroy, M. J., Jr.; Ream, L. W.; Curreri, J. S.

    1971-01-01

    The performance characteristics of the Brayton-rotating-unit's 4.97-inch radial turbine were investigated with the turbine part of a power conversion system. The following system parameters were varied: turbine inlet temperature from 1200 to 1600 F, compressor inlet temperature from 60 to 120 F, compressor outlet pressure from 20 to 45 psia, and shaft speed from 90-110 percent of rated speed (36000 rpm). The working fluid of the system was a gas mixture of helium-xenon with a nominal molecular weight of 83.8. Test results indicate that changes in system conditions have little effect on the turbine efficiency. At the design turbine inlet temperature of 1600 F and compressor inlet temperature of 80 F, an average turbine efficiency of 91 percent was obtained.

  8. The Aerostructures Test Wing (ATW) experiment, which consisted of an 18-inch carbon fiber test wing with surface-mounted piezoelectric strain actuators, undergoing ground testing prior to flight on Dryden's F-15B Research Testbed aircraft

    NASA Image and Video Library

    2001-03-28

    The Aerostructures Test Wing (ATW) experiment, which consisted of an 18-inch carbon fiber test wing with surface-mounted piezoelectric strain actuators, undergoing ground testing prior to flight on Dryden's F-15B Research Testbed aircraft

  9. Teaching about Comparative Government

    ERIC Educational Resources Information Center

    Risinger, C. Frederick

    2009-01-01

    As international relationships become increasingly important (with both friendly and not-so-friendly governments), the author believes that it is important for U.S. students to learn about how a parliamentary democracy works--how it is similar, but different from a presidential-style government. Learning about the systems of government of other…

  10. Student Government Manual: A Practical Guide for Organizing Student Governments.

    ERIC Educational Resources Information Center

    East Harlem Block Nursery, Inc., New York, NY.

    This manual is written for adults working in the schools to organize student governments. It is based on the experience of the Youth Action Program (YAP) of East Harlem (New York City) in organizing and developing student leadership. The manual is divided into 10 sections. "Student Government: Leadership and Purposes" explores the…

  11. Description and operating performance of a parallel-rail electric-arc system with helium driver gas for the Langley 6-inch expansion tube

    NASA Technical Reports Server (NTRS)

    Moore, J. A.

    1976-01-01

    A parallel-rail arc-discharge system to heat and pressurize the initial helium driver gas of the Langley 6-inch expansion tube is described. This system was designed for a 2.44-m-long driver vessel rated at 138 MPa, with a distance between rails of 20.3 cm. Electric energy was obtained from a capacitor storage system rated at 12,000 V with a maximum energy of 5 MJ. Tests were performed over a range of energy from 1.74 MJ to the maximum value. The operating experience and system performance are discussed, along with results from a limited number of expansion-tube tests with air and carbon dioxide as test gases.

  12. 24 CFR 598.505 - Governments.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Governments. 598.505 Section 598....505 Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part applies to all such governments. ...

  13. 7 CFR 25.501 - Governments.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 1 2013-01-01 2013-01-01 false Governments. 25.501 Section 25.501 Agriculture Office....501 Governments. If more than one State or local government seeks to nominate an area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  14. 7 CFR 25.501 - Governments.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 1 2012-01-01 2012-01-01 false Governments. 25.501 Section 25.501 Agriculture Office....501 Governments. If more than one State or local government seeks to nominate an area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  15. 7 CFR 25.501 - Governments.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Governments. 25.501 Section 25.501 Agriculture Office....501 Governments. If more than one State or local government seeks to nominate an area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  16. 7 CFR 25.501 - Governments.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 1 2014-01-01 2014-01-01 false Governments. 25.501 Section 25.501 Agriculture Office....501 Governments. If more than one State or local government seeks to nominate an area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  17. 24 CFR 598.505 - Governments.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 3 2013-04-01 2013-04-01 false Governments. 598.505 Section 598....505 Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part applies to all such governments. ...

  18. 24 CFR 598.505 - Governments.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 3 2012-04-01 2012-04-01 false Governments. 598.505 Section 598....505 Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part applies to all such governments. ...

  19. 24 CFR 598.505 - Governments.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 3 2011-04-01 2010-04-01 true Governments. 598.505 Section 598.505... Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part applies to all such governments. ...

  20. 24 CFR 598.505 - Governments.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 3 2014-04-01 2013-04-01 true Governments. 598.505 Section 598.505... Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part applies to all such governments. ...

  1. 7 CFR 25.501 - Governments.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 1 2011-01-01 2011-01-01 false Governments. 25.501 Section 25.501 Agriculture Office....501 Governments. If more than one State or local government seeks to nominate an area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  2. Pricing Government Information.

    ERIC Educational Resources Information Center

    Love, James

    1995-01-01

    Improvements in technology have increased the social and economic value of government information. This increase, combined with changes in information storage and dissemination cost, contributes to controversy over how government information should be disseminated and priced. Discussion includes economic concepts, rules and algorithms used by…

  3. Government Regulatory

    NASA Astrophysics Data System (ADS)

    Becker, Katie

    Government regulation of food products, food processing, and food preparation is imperative in bringing an unadulterated, nonmisleading, and safe food product to market and is relevant to all areas of food science, including engineering, processing, chemistry, and microbiology. The liability associated with providing consumers with an adulterated or substandard product cannot only tarnish a company's name and reputation, but also impose substantial financial repercussions on the company and those individuals who play an active role in the violation. In order for a company to fully comply with the relevant food laws (both federal and state), an intimate knowledge of food science is required. Individuals knowledgeable in food science play an integral role not only in implementing and counseling food companies/processors to ensure compliance with government regulations, but these individuals are also necessary to the state and federal governments that make and enforce the relevant laws and regulators.

  4. 24 CFR 597.501 - Governments.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Governments. 597.501 Section 597... Special Rules § 597.501 Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  5. 24 CFR 597.501 - Governments.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 3 2013-04-01 2013-04-01 false Governments. 597.501 Section 597... Special Rules § 597.501 Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  6. 24 CFR 597.501 - Governments.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 3 2012-04-01 2012-04-01 false Governments. 597.501 Section 597... Special Rules § 597.501 Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  7. 24 CFR 597.501 - Governments.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 3 2011-04-01 2010-04-01 true Governments. 597.501 Section 597.501... Rules § 597.501 Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  8. 24 CFR 597.501 - Governments.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 3 2014-04-01 2013-04-01 true Governments. 597.501 Section 597.501... Rules § 597.501 Governments. If more than one State or local government seeks to nominate an urban area under this part, any reference to or requirement of this part shall apply to all such governments. ...

  9. Institutional analysis of health system governance.

    PubMed

    Abimbola, Seye; Negin, Joel; Martiniuk, Alexandra L; Jan, Stephen

    2017-11-01

    It is important that researchers who study health system governance have a set of collective understandings of the meanings of governance, which can then inform the methods used in research. We present an institutional framing and definition of health system governance; that is, governance refers to making, changing, monitoring and enforcing the rules that govern the demand and supply of health services. This pervasive, relational view of governance is to be preferred to approaches that focus primarily on structures of governments and health care organizations, because health system governance involves communities and service users, and because governments in many low- and middle-income countries tend to under-govern. Therefore, the study of health system governance requires institutional analysis; an approach that focuses not only on structures, but also on the rules (both formal and informal) governing demand and supply relations. Using this 'structure-relations' lens, and based on our field experience, we discuss how this focus could be applied to the three approaches to framing and studying health system governance that we identified in the literature. In order of decreasing focus on structures ('hardware') and increasing focus on relations ('software'), they are: (1) the government-centred approach, which focuses on the role of governments, above or to the exclusion of non-government health system actors; (2) the building-block approach, which focuses on the internal workings of health care organizations, and treats governance as one of the several building blocks of organizations; and (3) the institutional approach, which focuses on how the rules governing social and economic interactions are made, changed, monitored and enforced. Notably, either or both qualitative and quantitative methods may be used by researchers in efforts to incorporate the analysis of how rules determine relations among health system actors into these three approaches to health system

  10. Business Models of E-Government: Research on Dynamic E-Government Based on Web Services

    NASA Astrophysics Data System (ADS)

    Li, Yan; Yang, Jiumin

    Government transcends all sectors in a society. It provides not only the legal, political and economic infrastructure to support other sectors, but also exerts significant influence on the social factors that contribute to their development. With its maturity of technologies and management, e-government will eventually enter into the time of 'one-stop' services. Among others, the technology of Web services is the major contributor to this achievement. Web services provides a new way of standard-based software technology, letting programmers combine existing computer system in new ways over the Internet within one business or across many, and would thereby bring about profound and far-reaching impacts on e-government. This paper introduced the business modes of e-government, architecture of dynamic e-government and its key technologies. Finally future prospect of dynamic e-government was also briefly discussed.

  11. Policy Governance Revisited.

    ERIC Educational Resources Information Center

    Price, William J.

    2001-01-01

    An administrator trainer/former superintendent's experience suggests that corporate governance models don't fit the reality of school governance in many districts. Elected board members define their roles differently than their business counterparts and derive little or no monetary benefit from public service. The "new breed" resemble…

  12. Comparative Study of Government and Non Government College Teachers in Relation to Job Satisfaction and Job Stress

    ERIC Educational Resources Information Center

    Kaur, Sarbjit; Kumar, Dinesh

    2008-01-01

    They studied on the government non government college teachers in relation to job satisfaction and job stress. They collected the sample from 200 college teacher from government and non government from bathinda district (Punjab) to discover the difference between government and non government male and female college teachers in relation to job…

  13. Government influence on patient organizations.

    PubMed

    Van de Bovenkamp, Hester M; Trappenburg, Margo J

    2011-12-01

    Patient organizations increasingly play an important role in health care decision-making in Western countries. The Netherlands is one of the countries where this trend has gone furthest. In the literature some problems are identified, such as instrumental use of patient organizations by care providers, health insurers and the pharmaceutical industry. To strengthen the position of patient organizations government funding is often recommended as a solution. In this paper we analyze the ties between Dutch government and Dutch patient organizations to learn more about the effects of such a relationship between government and this part of civil society. Our study is based on official government documents and existing empirical research on patient organizations. We found that government influence on patient organizations has become quite substantial with government influencing the organizational structure of patient organizations, the activities these organizations perform and even their ideology. Financing patient organizations offers the government an important means to hold them accountable. Although the ties between patient organizations and the government enable the former to play a role that can be valued as positive by both parties, we argue that they raise problems as well which warrant a discussion on how much government influence on civil society is acceptable.

  14. Business Reengineering - Government Viability

    DTIC Science & Technology

    2000-04-01

    BUSINESS REENGINEERING - GOVERNMENT VIABILITY BY LIEUTENANT COLONEL GRAY K. COYNER United States Air Force Reserve DISTRIBUTION STATEMENT A: Approved...PROJECT Business Reengineering - Government Viability by Lt Col Gray K. Coyner USAFR Col Harry E. LeBoeuf Jr. Project Advisor The views expressed in...release. Distribution is unlimited. ii ABSTRACT AUTHOR: Gray K. Coyner TITLE: Business Reengineering - Government Viability FORMAT: Strategy Research

  15. 48 CFR 46.406 - Foreign governments.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

  16. 48 CFR 46.406 - Foreign governments.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

  17. 48 CFR 46.406 - Foreign governments.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

  18. 48 CFR 46.406 - Foreign governments.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

  19. 48 CFR 46.406 - Foreign governments.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Foreign governments. 46... MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 46.406 Foreign governments. Government contract quality assurance performed for foreign governments or international agencies shall be...

  20. A COMPARATIVE ANALYSIS BETWEEN FRANCE AND JAPAN ON LOCAL GOVERNMENTS' INVOLVEMENT IN NUCLEAR SAFETY GOVERNANCE

    NASA Astrophysics Data System (ADS)

    Sugawara, Shin-Etsu; Shiroyama, Hideaki

    This paper shows a comparative analysis between France and Japan on the way of the local governments' involvement in nuclear safety governance through some interviews. In France, a law came into force that requires related local governments to establish "Commision Locale d'Information" (CLI), which means the local governments officially involve in nuclear regulatory activity. Meanwhile, in Japan, related local governments substantially involve in the operation of nuclear facilities through the "safety agreements" in spite of the lack of legal authority. As a result of comparative analysis, we can point out some institutional input from French cases as follows: to clarify the local governments' roles in the nuclear regulation system, to establish the official channels of communication among nuclear utilities, national regulatory authorities and local governments, and to stipulate explicitly the transparency as a purpose of safety regulation.

  1. 'Pop-Up' Governance: developing internal governance frameworks for consortia: the example of UK10K.

    PubMed

    Kaye, Jane; Muddyman, Dawn; Smee, Carol; Kennedy, Karen; Bell, Jessica

    2015-01-01

    Innovations in information technologies have facilitated the development of new styles of research networks and forms of governance. This is evident in genomics where increasingly, research is carried out by large, interdisciplinary consortia focussing on a specific research endeavour. The UK10K project is an example of a human genomics consortium funded to provide insights into the genomics of rare conditions, and establish a community resource from generated sequence data. To achieve its objectives according to the agreed timetable, the UK10K project established an internal governance system to expedite the research and to deal with the complex issues that arose. The project's governance structure exemplifies a new form of network governance called 'pop-up' governance. 'Pop-up' because: it was put together quickly, existed for a specific period, was designed for a specific purpose, and was dismantled easily on project completion. In this paper, we use UK10K to describe how 'pop-up' governance works on the ground and how relational, hierarchical and contractual governance mechanisms are used in this new form of network governance.

  2. Using IT Governance

    ERIC Educational Resources Information Center

    Brobst, Jan; Council, Chip

    2005-01-01

    The discussion in this article is intended to provide an examination of why top management, IT management, and internal auditors should be interested in IT governance. Some aspects of IT management will be described including implementation, auditing, availability, security, and alignment. One governance framework, COBIT, will be utilized as a…

  3. 31 CFR 800.213 - Foreign government.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Foreign government. 800.213 Section... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.213 Foreign government. The term foreign government means any government or body exercising governmental functions, other than the United States Government or a...

  4. 31 CFR 800.213 - Foreign government.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Foreign government. 800.213 Section... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.213 Foreign government. The term foreign government means any government or body exercising governmental functions, other than the United States Government or a...

  5. 31 CFR 800.213 - Foreign government.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Foreign government. 800.213 Section... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.213 Foreign government. The term foreign government means any government or body exercising governmental functions, other than the United States Government or a...

  6. 31 CFR 800.213 - Foreign government.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Foreign government. 800.213 Section... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.213 Foreign government. The term foreign government means any government or body exercising governmental functions, other than the United States Government or a...

  7. 31 CFR 800.213 - Foreign government.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Foreign government. 800.213 Section... TAKEOVERS BY FOREIGN PERSONS Definitions § 800.213 Foreign government. The term foreign government means any government or body exercising governmental functions, other than the United States Government or a...

  8. Design, fabrication and acoustic tests of a 36 inch (0.914 meter) statorless turbotip fan

    NASA Technical Reports Server (NTRS)

    Smith, E. G.; Stempert, D. L.; Uhl, W. R.

    1975-01-01

    The LF336/E is a 36 inch (0.914 meter) diameter fan designed to operate in a rotor-alone configuration. Design features required for modification of the existing LF336/A rotor-stator fan into the LF336/E statorless fan configuration are discussed. Tests of the statorless fan identified an aerodynamic performance deficiency due to inaccurate accounting of the fan exit swirl during the aerodynamic design. This performance deficiency, related to fan exit static pressure levels, produced about a 20 percent thrust loss. A study was then conducted for further evaluation of the fan exit flow fields typical of statorless fan systems. This study showed that through proper selection of fan design variables such as pressure ratio, radius ratio, and swirl distributions, performance of a statorless fan configuration could be improved with levels of thrust approaching the conventional rotor-stator fan system. Acoustic measurements were taken for the statorless fan system at both GE and NASA, and when compared to other lift fan systems, showed noise levels comparable to the quietest lift fan configuration which included rotor-stator spacing and acoustic treatment. The statorless fan system was also used to determine effects of rotor leading edge serrations on noise generations. A cascade test program identified the serration geometry based on minimum pressure losses, wake turbulence levels and noise generations.

  9. Governance of Governance in Higher Education: Practices and Lessons Drawn from the Portuguese Case

    ERIC Educational Resources Information Center

    Magalhaes, Antonio; Veiga, Amelia; Amaral, Alberto; Sousa, Sofia; Ribeiro, Filipa

    2013-01-01

    The implementation of the governance reform of Portuguese higher education has been developed under the influence of "new public management" resulting in the loss of collegial governance. Additionally, the need for meta-governance of the higher education system and institutions to monitor institutional performance against policy…

  10. Performance Government: Activating and Regulating the Self-Governing Capacities of Teachers and School Leaders

    ERIC Educational Resources Information Center

    O'Brien, Peter C.

    2015-01-01

    This article analyses "performance government" as an emergent form of rule in advanced liberal democracies. It discloses how teachers and school leaders in Australia are being governed by the practices of performance government which centre on the recently established Australian Institute for Teaching and School Leadership (AITSL) and…

  11. Measuring governance at health facility level: developing and validation of simple governance tool in Zambia.

    PubMed

    Mutale, Wilbroad; Mwanamwenge, Margaret Tembo; Balabanova, Dina; Spicer, Neil; Ayles, Helen

    2013-08-09

    Governance has been cited as a key determinant of economic growth, social advancement and overall development. Achievement of millennium development goals is partly dependant on governance practices. In 2007, Health Systems 20/20 conducted an Internet-based survey on the practice of good governance. The survey posed a set of good practices related to health governance and asked respondents to indicate whether their experience confirmed or disconfirmed those practices. We applied the 17 governance statements in rural health facilities of Zambia. The aim was to establish whether the statements were reliable and valid for assessing governance practices at primary care level. Both quantitative and qualitative methods were used. We first applied the governance statements developed by the health system 20/20 and then conducted focus group discussion and In-depth interviews to explore some elements of governance including accountability and community participation. The target respondents were the health facility management team and community members. The sample size include 42 health facilities. Data was analyzed using SPSS version 17 and Nvivo version 9. The 95% one-sided confidence interval for Cronbach's alpha was between 0.69 and 0.74 for the 16 items.The mean score for most of the items was above 3. Factor analysis yielded five principle components: Transparency, community participation, Intelligence & vision, Accountability and Regulation & oversight. Most of the items (6) clustered around the transparency latent factor. Chongwe district performed poorly in overall mean governance score and across the five domains of governance. The overall scores in Chongwe ranged between 51 and 94% with the mean of 80%. Kafue and Luangwa districts had similar overall mean governance scores (88%). Community participation was generally low. Generally, it was noted that community members lacked capacity to hold health workers accountable for drugs and medical supplies. The study

  12. 41 CFR 301-10.264 - What amount must the Government be reimbursed for travel on Government aircraft?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... regularly scheduled commercial airline service and are authorized to use Government aircraft, you do not have to reimburse the Government. (c) For political travel on a Government aircraft (i.e., for any trip... Government be reimbursed for travel on Government aircraft? 301-10.264 Section 301-10.264 Public Contracts...

  13. 41 CFR 301-10.264 - What amount must the Government be reimbursed for travel on Government aircraft?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... regularly scheduled commercial airline service and are authorized to use Government aircraft, you do not have to reimburse the Government. (c) For political travel on a Government aircraft (i.e., for any trip... Government be reimbursed for travel on Government aircraft? 301-10.264 Section 301-10.264 Public Contracts...

  14. School Board Governance in Changing Times: A School's Transition to Policy Governance

    ERIC Educational Resources Information Center

    Curry, Katherine; Kinder, Sean; Benoiton, Tania; Noonan, Jessica

    2018-01-01

    The expansion of the school choice movement and greater flexibility allowed by Every Student Succeeds Act (ESSA) means that education governance is emerging as an important issue for school effectiveness. This longitudinal case study sought to gain an understanding of the implementation of a new governance structure, Policy Governance, in a…

  15. Global health justice and governance.

    PubMed

    Ruger, Jennifer Prah

    2012-01-01

    While there is a growing body of work on moral issues and global governance in the fields of global justice and international relations, little work has connected principles of global health justice with those of global health governance for a theory of global health. Such a theory would enable analysis and evaluation of the current global health system and would ethically and empirically ground proposals for reforming it to more closely align with moral values. Global health governance has been framed as an issue of national security, human security, human rights, and global public goods. The global health governance literature is essentially untethered to a theorized framework to illuminate or evaluate governance. This article ties global health justice and ethics to principles for governing the global health realm, developing a theoretical framework for global and domestic institutions and actors.

  16. A novel 2D silicon nano-mold fabrication technique for linear nanochannels over a 4 inch diameter substrate

    PubMed Central

    Yin, Zhifu; Qi, Liping; Zou, Helin; Sun, Lei

    2016-01-01

    A novel low-cost 2D silicon nano-mold fabrication technique was developed based on Cu inclined-deposition and Ar+ (argon ion) etching. With this technique, sub-100 nm 2D (two dimensional) nano-channels can be etched economically over the whole area of a 4 inch n-type <100> silicon wafer. The fabricating process consists of only 4 steps, UV (Ultraviolet) lithography, inclined Cu deposition, Ar+ sputter etching, and photoresist & Cu removing. During this nano-mold fabrication process, we investigated the influence of the deposition angle on the width of the nano-channels and the effect of Ar+ etching time on their depth. Post-etching measurements showed the accuracy of the nanochannels over the whole area: the variation in width is 10%, in depth it is 11%. However, post-etching measurements also showed the accuracy of the nanochannels between chips: the variation in width is 2%, in depth it is 5%. With this newly developed technology, low-cost and large scale 2D nano-molds can be fabricated, which allows commercial manufacturing of nano-components over large areas. PMID:26752559

  17. Student Government and Student Participation in Junior College Governance--Models for the 1970's.

    ERIC Educational Resources Information Center

    Deegan, William L.

    It is the author's contention that student government revitalization will come only when student government begins to play a substantive role in policy making and implementation. The purpose of this paper is to consider, criticize, and propose a number of models for student participation in junior college governance. The first, a traditional…

  18. How nations govern growth.

    PubMed

    1984-03-02

    Officials in China admit that the killing or abondoning of baby girls stems from a government policy limiting couples to 1 child combined with an ancient preference for sons. At the same time leaders maintain that population growth is an national emergency and must be checked. And the 1-child policy remains. To enforce the policy, sterilization is compulsory for 1 parent in a 2-child family. Other reports claim that pregnant women face severe government and social pressure to have an abortion. Comunist governments are not alone in taking a forceful role in population control. In 1975 thousands of people in India were pressured to undergo "voluntary" sterilization. In many places, police and tax collectors, money in hand, "convinced" people to get sterilized. Critics recognize a horribla abuse of government powers in these population control efforts. Recognizing that the populations of the poorest nations will double in 20-30 years, 59 countries responded with some kind of population policy by 1980. These countries are spending an average of US$4.60 on population programs for each US$1 they received in UN aid. In many places, the effort is beginning to show results. A 1982 survey found that 35 countries -- with 88% of the 3rd world population -- had cut the growth of their birthrates by 5-34%. Generally, governments have chosen any of 3 ways to attack the problem: cash payments for sterilization or contraceptive use; penalties for big families; and "delayed incentives." At least 20 governments use money to convince people to have fewer babies. Some programs pay for sterilization,other for contraceptive use. All payments are low. Some governments personalize those who exceed a recommended family size. Other nations have adopted variations of the idea. Some governments, instead of paying up front cash, offer pension plans or bank accounts to limit family size. Almost all population experts believe that the mot successful programs are those which are not imposed from

  19. Virtual Team Governance: Addressing the Governance Mechanisms and Virtual Team Performance

    NASA Astrophysics Data System (ADS)

    Zhan, Yihong; Bai, Yu; Liu, Ziheng

    As technology has improved and collaborative software has been developed, virtual teams with geographically dispersed members spread across diverse physical locations have become increasingly prominent. Virtual team is supported by advancing communication technologies, which makes virtual teams able to largely transcend time and space. Virtual teams have changed the corporate landscape, which are more complex and dynamic than traditional teams since the members of virtual teams are spread on diverse geographical locations and their roles in the virtual team are different. Therefore, how to realize good governance of virtual team and arrive at good virtual team performance is becoming critical and challenging. Good virtual team governance is essential for a high-performance virtual team. This paper explores the performance and the governance mechanism of virtual team. It establishes a model to explain the relationship between the performance and the governance mechanisms in virtual teams. This paper is focusing on managing virtual teams. It aims to find the strategies to help business organizations to improve the performance of their virtual teams and arrive at the objectives of good virtual team management.

  20. Polycentrism in Global Health Governance Scholarship

    PubMed Central

    Tosun, Jale

    2018-01-01

    Drawing on an in-depth analysis of eight global health networks, a recent essay in this journal argued that global health networks face four challenges to their effectiveness: problem definition, positioning, coalition-building, and governance. While sharing the argument of the essay concerned, in this commentary, we argue that these analytical concepts can be used to explicate a concept that has implicitly been used in global health governance scholarship for quite a few years. While already prominent in the discussion of climate change governance, for instance, global health governance scholarship could make progress by looking at global health governance as being polycentric. Concisely, polycentric forms of governance mix scales, mechanisms, and actors. Drawing on the essay, we propose a polycentric approach to the study of global health governance that incorporates coalitionbuilding tactics, internal governance and global political priority as explanatory factors. PMID:29325406

  1. Practice Governance 101, v. 2013.

    PubMed

    Hayes, David F

    2013-03-01

    Consensus governance is a principal weakness leading to group malfunction and failure. Inadequate group governance produces inadequate decisions, leading to inconsistent patient care, inadequate responses to marketplace challenges, and disregard for customers and strategic partners. The effectiveness of consensus management is limited by the pervasive incomplete knowledge and personal biases of partners. Additional structural weaknesses of group behavior include information cascade, the wisdom of the crowd, groupthink, pluralistic ignorance, analysis paralysis, peer pressure, and the herding instinct. Usual corporate governance is, by necessity, the governance model of choice. Full accountability of the decider(s) is the defining requirement of all successful governance models. Copyright © 2013 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  2. Shared governance in a clinic system.

    PubMed

    Meyers, Michelle M; Costanzo, Cindy

    2015-01-01

    Shared governance in health care empowers nurses to share in the decision-making process, which results in decentralized management and collective accountability. Share governance practices have been present in hospitals since the late 1970s. However, shared governance in ambulatory care clinics has not been well established. The subjects of this quality project included staff and administrative nurses in a clinic system. The stakeholder committee chose what model of shared governance to implement and educated clinic staff. The Index of Professional Nursing Governance measured a shared governance score pre- and postimplementation of the Clinic Nursing Council. The Clinic Nursing Council met bimonthly for 3 months during this project to discuss issues and make decisions related to nursing staff. The Index of Professional Nursing Governance scores indicated traditional governance pre- and postimplementation of the Clinic Nursing Council, which is to be expected. The stakeholder committee was beneficial to the initial implementation process and facilitated staff nurse involvement. Shared governance is an evolutionary process that develops empowered nurses and nurse leaders.

  3. 7 CFR 3015.191 - Governments.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Governments. 3015.191 Section 3015.191 Agriculture... AGRICULTURE UNIFORM FEDERAL ASSISTANCE REGULATIONS Cost Principles § 3015.191 Governments. (a) OMB Circular No... be used in determining the allowable costs of activities conducted by governments. (b) Additional...

  4. 7 CFR 3015.191 - Governments.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 15 2014-01-01 2014-01-01 false Governments. 3015.191 Section 3015.191 Agriculture... AGRICULTURE UNIFORM FEDERAL ASSISTANCE REGULATIONS Cost Principles § 3015.191 Governments. (a) OMB Circular No... be used in determining the allowable costs of activities conducted by governments. (b) Additional...

  5. 7 CFR 3015.191 - Governments.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Governments. 3015.191 Section 3015.191 Agriculture... AGRICULTURE UNIFORM FEDERAL ASSISTANCE REGULATIONS Cost Principles § 3015.191 Governments. (a) OMB Circular No... be used in determining the allowable costs of activities conducted by governments. (b) Additional...

  6. 7 CFR 3015.191 - Governments.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 15 2013-01-01 2013-01-01 false Governments. 3015.191 Section 3015.191 Agriculture... AGRICULTURE UNIFORM FEDERAL ASSISTANCE REGULATIONS Cost Principles § 3015.191 Governments. (a) OMB Circular No... be used in determining the allowable costs of activities conducted by governments. (b) Additional...

  7. 7 CFR 3015.191 - Governments.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 15 2012-01-01 2012-01-01 false Governments. 3015.191 Section 3015.191 Agriculture... AGRICULTURE UNIFORM FEDERAL ASSISTANCE REGULATIONS Cost Principles § 3015.191 Governments. (a) OMB Circular No... be used in determining the allowable costs of activities conducted by governments. (b) Additional...

  8. Visual Culture and Electronic Government: Exploring a New Generation of E-Government

    NASA Astrophysics Data System (ADS)

    Bekkers, Victor; Moody, Rebecca

    E-government is becoming more picture-oriented. What meaning do stakeholders attach to visual events and visualization? Comparative case study research show the functional meaning primarily refers to registration, integration, transparency and communication. The political meaning refers to new ways of framing in order to secure specific interests and claims. To what the institutional meaning relates is ambiguous: either it improves the position of citizens, or it reinforces the existing bias presented by governments. Hence, we expect that the emergence of a visualized public space, through omnipresent penetration of (mobile) multimedia technologies, will influence government-citizen interactions.

  9. Weighted Components of i-Government Enterprise Architecture

    NASA Astrophysics Data System (ADS)

    Budiardjo, E. K.; Firmansyah, G.; Hasibuan, Z. A.

    2017-01-01

    Lack of government performance, among others due to the lack of coordination and communication among government agencies. Whilst, Enterprise Architecture (EA) in the government can be use as a strategic planning tool to improve productivity, efficiency, and effectivity. However, the existence components of Government Enterprise Architecture (GEA) do not show level of importance, that cause difficulty in implementing good e-government for good governance. This study is to explore the weight of GEA components using Principal Component Analysis (PCA) in order to discovered an inherent structure of e-government. The results show that IT governance component of GEA play a major role in the GEA. The rest of components that consist of e-government system, e-government regulation, e-government management, and application key operational, contributed more or less the same. Beside that GEA from other countries analyzes using comparative base on comon enterprise architecture component. These weighted components use to construct i-Government enterprise architecture. and show the relative importance of component in order to established priorities in developing e-government.

  10. Clinical governance and pathology

    PubMed Central

    Crook, M

    2002-01-01

    This article looks at clinical governance and pathology. Clinical governance should be an important tool in seeking quality improvement within the Natinal Health Service. But how as pathologists should we go about it? PMID:11896066

  11. A new governance space for health

    PubMed Central

    Kickbusch, Ilona; Szabo, Martina Marianna Cassar

    2014-01-01

    Global health refers to ‘those health issues which transcend national boundaries and governments and call for actions on the global forces and global flows that determine the health of people’. (Kickbusch 2006) Governance in this trans-national and cross-cutting arena can be analyzed along three political spaces: global health governance, global governance for health, and governance for global health. It is argued that the management of the interface between these three political spaces of governance in the global public health domain is becoming increasingly important in order to move the global health agenda forward. Global health governance refers mainly to those institutions and processes of governance which are related to an explicit health mandate, such as the World Health Organization; global governance for health refers mainly to those institutions and processes of global governance which have a direct and indirect health impact, such as the United Nations, World Trade Organization or the Human Rights Council; governance for global health refers to the institutions and mechanisms established at the national and regional level to contribute to global health governance and/or to governance for global health – such as national global health strategies or regional strategies for global health. It can also refer to club strategies, such as agreements by a group of countries such as the BRICS. In all three political spaces, the involvement of a multitude of state and non-state actors has become the norm – that is why issues of legitimacy, accountability and transparency have moved to the fore. The transnational nature of global health will require the engagement of all actors to produce global public goods for health (GPGH) and to ensure a rules-based and reliably financed global public health domain. PMID:24560259

  12. A new governance space for health.

    PubMed

    Kickbusch, Ilona; Szabo, Martina Marianna Cassar

    2014-01-01

    Global health refers to 'those health issues which transcend national boundaries and governments and call for actions on the global forces and global flows that determine the health of people'. (Kickbusch 2006) Governance in this trans-national and cross-cutting arena can be analyzed along three political spaces: global health governance, global governance for health, and governance for global health. It is argued that the management of the interface between these three political spaces of governance in the global public health domain is becoming increasingly important in order to move the global health agenda forward. Global health governance refers mainly to those institutions and processes of governance which are related to an explicit health mandate, such as the World Health Organization; global governance for health refers mainly to those institutions and processes of global governance which have a direct and indirect health impact, such as the United Nations, World Trade Organization or the Human Rights Council; governance for global health refers to the institutions and mechanisms established at the national and regional level to contribute to global health governance and/or to governance for global health--such as national global health strategies or regional strategies for global health. It can also refer to club strategies, such as agreements by a group of countries such as the BRICS. In all three political spaces, the involvement of a multitude of state and non-state actors has become the norm--that is why issues of legitimacy, accountability and transparency have moved to the fore. The transnational nature of global health will require the engagement of all actors to produce global public goods for health (GPGH) and to ensure a rules-based and reliably financed global public health domain.

  13. 2 CFR 25.340 - Local government.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 2 Grants and Agreements 1 2014-01-01 2014-01-01 false Local government. 25.340 Section 25.340... CENTRAL CONTRACTOR REGISTRATION Definitions § 25.340 Local government. Local government means a: (a... district; (j) School district; (k) Intrastate district; (l) Council of governments, whether or not...

  14. 2 CFR 25.340 - Local government.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 2 Grants and Agreements 1 2012-01-01 2012-01-01 false Local government. 25.340 Section 25.340... IDENTIFIER AND CENTRAL CONTRACTOR REGISTRATION Definitions § 25.340 Local government. Local government means...; (i) Special district; (j) School district; (k) Intrastate district; (l) Council of governments...

  15. 2 CFR 25.340 - Local government.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 2 Grants and Agreements 1 2013-01-01 2013-01-01 false Local government. 25.340 Section 25.340... IDENTIFIER AND CENTRAL CONTRACTOR REGISTRATION Definitions § 25.340 Local government. Local government means...; (i) Special district; (j) School district; (k) Intrastate district; (l) Council of governments...

  16. 2 CFR 25.340 - Local government.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 2 Grants and Agreements 1 2011-01-01 2011-01-01 false Local government. 25.340 Section 25.340... IDENTIFIER AND CENTRAL CONTRACTOR REGISTRATION Definitions § 25.340 Local government. Local government means...; (i) Special district; (j) School district; (k) Intrastate district; (l) Council of governments...

  17. 48 CFR 2452.208-71 - Reproduction of reports.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... used in single unit duplicating equipment no larger than 11 by 17 inches with a maximum image of 103/4... for reproduction by photo offset methods) shall become the property of the Government and shall be...

  18. 48 CFR 2452.208-71 - Reproduction of reports.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... used in single unit duplicating equipment no larger than 11 by 17 inches with a maximum image of 103/4... for reproduction by photo offset methods) shall become the property of the Government and shall be...

  19. 48 CFR 2452.208-71 - Reproduction of reports.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... used in single unit duplicating equipment no larger than 11 by 17 inches with a maximum image of 103/4... for reproduction by photo offset methods) shall become the property of the Government and shall be...

  20. 48 CFR 2452.208-71 - Reproduction of reports.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... used in single unit duplicating equipment no larger than 11 by 17 inches with a maximum image of 103/4... for reproduction by photo offset methods) shall become the property of the Government and shall be...

  1. 39 CFR 259.1 - Government.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 39 Postal Service 1 2012-07-01 2012-07-01 false Government. 259.1 Section 259.1 Postal Service....1 Government. (a) Policy. The Postal Service cooperates with Federal Agencies whenever the overall costs to Government will be reduced. Assistance in a number of special projects and programs is provided...

  2. 39 CFR 259.1 - Government.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 39 Postal Service 1 2013-07-01 2013-07-01 false Government. 259.1 Section 259.1 Postal Service....1 Government. (a) Policy. The Postal Service cooperates with Federal Agencies whenever the overall costs to Government will be reduced. Assistance in a number of special projects and programs is provided...

  3. 39 CFR 259.1 - Government.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 39 Postal Service 1 2011-07-01 2011-07-01 false Government. 259.1 Section 259.1 Postal Service....1 Government. (a) Policy. The Postal Service cooperates with Federal Agencies whenever the overall costs to Government will be reduced. Assistance in a number of special projects and programs is provided...

  4. 39 CFR 259.1 - Government.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Government. 259.1 Section 259.1 Postal Service....1 Government. (a) Policy. The Postal Service cooperates with Federal Agencies whenever the overall costs to Government will be reduced. Assistance in a number of special projects and programs is provided...

  5. 39 CFR 259.1 - Government.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 39 Postal Service 1 2014-07-01 2014-07-01 false Government. 259.1 Section 259.1 Postal Service....1 Government. (a) Policy. The Postal Service cooperates with Federal Agencies whenever the overall costs to Government will be reduced. Assistance in a number of special projects and programs is provided...

  6. Governing Tomorrow's Campus. Perspectives and Agendas.

    ERIC Educational Resources Information Center

    Schuster, Jack H.; And Others

    A collection of original essays about who will and should share in governing colleges and universities is presented. Five parts contain 15 chapters as follows: (1) The Context of Contemporary Campus Governance: "Academic Governance: An Evolutionary Perspective," (W. Metzger); (2) New Perspectives on Campus Governance: "Leadership and Followership:…

  7. Governance and Trust in Higher Education

    ERIC Educational Resources Information Center

    Vidovich, Lesley; Currie, Jan

    2011-01-01

    The adoption of more corporate models of governance is a contemporary trend in higher education. In the early 2000s, the Australian Government legislated national governance protocols for universities, using the policy lever of financial sanctions. These more corporate-style governance protocols followed similar changes in the UK, consistent with…

  8. 2 CFR 200.64 - Local government.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 2 Grants and Agreements 1 2014-01-01 2014-01-01 false Local government. 200.64 Section 200.64... REQUIREMENTS FOR FEDERAL AWARDS Acronyms and Definitions Acronyms § 200.64 Local government. Local government means any unit of government within a state, including a: (a) County; (b) Borough; (c) Municipality; (d...

  9. Security Issues in mGovernment

    NASA Astrophysics Data System (ADS)

    Kumar, Manish; Hanumanthappa, M.; Reddy, Bhavanam Lakshma

    E-government is one of the most rapidly evolving service domains in the contemporary information society. Many governments have already developed and provided e-government services to businesses and citizens. Nowadays actors in the government domain attempt to take the next step and exploit the latest wireless technologies in order to provide ubiquitous services for mobile users. However, this approach involves some hidden risks mainly due to the inherent insecurity of the air medium and the vulnerabilities of the wireless systems. Thus, in this paper we investigate the security gaps and considerations which should be taken into account for an m-government system. Finally, we provide a list of security guidelines and policies, which the users of the system should be aware of and follow in order to avoid security attacks.

  10. Roadmapping Future E-Government Research

    NASA Astrophysics Data System (ADS)

    Bicking, Melanie

    Global electronic markets, virtual organisations, virtual identities, virtual products and services, and Internet-related crime are growing in prominence and importance. In a world that is increasingly non-physical and borderless, what are government's roles, responsibilities and limitations? The Internet plays a central role within the transformation process from traditional governments towards modern and innovative government that the requirements of an Information Society. Based on the findings of the eGovRTD2020 project, that aims at identifying key research challenges and at implementing a model for a holistic government with horizon 2020, this paper explains the necessity to investigate and understand the Internet and in particular government's role and responsibilities in it. Furthermore, the paper provides a research roadmap that details how to address certain issue related research questions.

  11. 31 CFR 538.305 - Government of Sudan.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Government of Sudan. 538.305 Section... § 538.305 Government of Sudan. The term Government of Sudan includes: (a) The state and the Government... § 538.305: The term Government of Sudan does not include the Government of the Republic of South Sudan...

  12. 31 CFR 538.305 - Government of Sudan.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Government of Sudan. 538.305 Section... § 538.305 Government of Sudan. The term Government of Sudan includes: (a) The state and the Government... § 538.305: The term Government of Sudan does not include the Government of the Republic of South Sudan...

  13. 31 CFR 538.305 - Government of Sudan.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Government of Sudan. 538.305 Section... § 538.305 Government of Sudan. The term Government of Sudan includes: (a) The state and the Government... § 538.305: The term Government of Sudan does not include the Government of the Republic of South Sudan...

  14. 41 CFR 301-70.804 - What amount must the Government be reimbursed for travel on a Government aircraft?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... no access to regularly scheduled commercial airline service. (c) For political travel on a Government... Government be reimbursed for travel on a Government aircraft? 301-70.804 Section 301-70.804 Public Contracts... Travel on Government Aircraft § 301-70.804 What amount must the Government be reimbursed for travel on a...

  15. 41 CFR 301-70.804 - What amount must the Government be reimbursed for travel on a Government aircraft?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... no access to regularly scheduled commercial airline service. (c) For political travel on a Government... Government be reimbursed for travel on a Government aircraft? 301-70.804 Section 301-70.804 Public Contracts... Travel on Government Aircraft § 301-70.804 What amount must the Government be reimbursed for travel on a...

  16. 22 CFR 221.43 - Governing law.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Governing law. 221.43 Section 221.43 Foreign... Administration § 221.43 Governing law. This Guarantee shall be governed by and construed in accordance with the laws of the United States of America governing contracts and commercial transactions of the United...

  17. 25 CFR 700.531 - Government property.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Government property. 700.531 Section 700.531 Indians THE... Responsibility and Conduct § 700.531 Government property. Employees shall be held accountable for Government... employee has a positive duty to protect and conserve Government property and to use it economically and for...

  18. 25 CFR 700.531 - Government property.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Government property. 700.531 Section 700.531 Indians THE... Responsibility and Conduct § 700.531 Government property. Employees shall be held accountable for Government... employee has a positive duty to protect and conserve Government property and to use it economically and for...

  19. 22 CFR 62.29 - Government visitors.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Government visitors. 62.29 Section 62.29... Program Provisions § 62.29 Government visitors. (a) Purpose. The government visitor category is for the exclusive use of the U.S. federal, state, or local government agencies. Programs under this section are for...

  20. 22 CFR 62.29 - Government visitors.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Government visitors. 62.29 Section 62.29... Program Provisions § 62.29 Government visitors. (a) Purpose. The government visitor category is for the exclusive use of the U.S. federal, state, or local government agencies. Programs under this section are for...

  1. 25 CFR 700.531 - Government property.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Government property. 700.531 Section 700.531 Indians THE... Responsibility and Conduct § 700.531 Government property. Employees shall be held accountable for Government... employee has a positive duty to protect and conserve Government property and to use it economically and for...

  2. 25 CFR 700.531 - Government property.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Government property. 700.531 Section 700.531 Indians THE... Responsibility and Conduct § 700.531 Government property. Employees shall be held accountable for Government... employee has a positive duty to protect and conserve Government property and to use it economically and for...

  3. 22 CFR 62.29 - Government visitors.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Government visitors. 62.29 Section 62.29... Program Provisions § 62.29 Government visitors. (a) Purpose. The government visitor category is for the exclusive use of the U.S. federal, state, or local government agencies. Programs under this section are for...

  4. 22 CFR 62.29 - Government visitors.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Government visitors. 62.29 Section 62.29... Program Provisions § 62.29 Government visitors. (a) Purpose. The government visitor category is for the exclusive use of the U.S. federal, state, or local government agencies. Programs under this section are for...

  5. 22 CFR 62.29 - Government visitors.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Government visitors. 62.29 Section 62.29... Program Provisions § 62.29 Government visitors. (a) Purpose. The government visitor category is for the exclusive use of the U.S. federal, state, or local government agencies. Programs under this section are for...

  6. 25 CFR 700.531 - Government property.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Government property. 700.531 Section 700.531 Indians THE... Responsibility and Conduct § 700.531 Government property. Employees shall be held accountable for Government... employee has a positive duty to protect and conserve Government property and to use it economically and for...

  7. Governance and performance: the performance of Dutch hospitals explained by governance characteristics.

    PubMed

    Blank, Jos L T; van Hulst, Bart Laurents

    2011-10-01

    This paper describes the efficiency of Dutch hospitals using the Data Envelopment Analysis (DEA) method with bootstrapping. In particular, the analysis focuses on accounting for cost inefficiency measures on the part of hospital corporate governance. We use bootstrap techniques, as introduced by Simar and Wilson (J. Econom. 136(1):31-64, 2007), in order to obtain more efficient estimates of the effects of governance on the efficiency. The results show that part of the cost efficiency can be explained with governance. In particular we find that a higher remuneration of the board as well as a higher remuneration of the supervisory board does not implicate better performance.

  8. Government or Non-Government Schools: A British Colonial Legacy and Its Aftermath.

    ERIC Educational Resources Information Center

    Whitehead, Clive

    This paper discusses voluntary schools in the former British colonies of Singapore, Malaysia, and Fiji, and the relevance of some aspects of voluntaryism for government schooling in Australia. The first section presents the historical background to the voluntary principle by which schools are owned and operated by non-government agencies assisted…

  9. Metadata Sets for e-Government Resources: The Extended e-Government Metadata Schema (eGMS+)

    NASA Astrophysics Data System (ADS)

    Charalabidis, Yannis; Lampathaki, Fenareti; Askounis, Dimitris

    In the dawn of the Semantic Web era, metadata appear as a key enabler that assists management of the e-Government resources related to the provision of personalized, efficient and proactive services oriented towards the real citizens’ needs. As different authorities typically use different terms to describe their resources and publish them in various e-Government Registries that may enhance the access to and delivery of governmental knowledge, but also need to communicate seamlessly at a national and pan-European level, the need for a unified e-Government metadata standard emerges. This paper presents the creation of an ontology-based extended metadata set for e-Government Resources that embraces services, documents, XML Schemas, code lists, public bodies and information systems. Such a metadata set formalizes the exchange of information between portals and registries and assists the service transformation and simplification efforts, while it can be further taken into consideration when applying Web 2.0 techniques in e-Government.

  10. Computerized and Networked Government Information Column

    ERIC Educational Resources Information Center

    Stratford, Juri

    2004-01-01

    The efforts of the U.S. federal government to develop E-Government services have been the subject of many recent news stories. In February 2002, Arthur Andersen's Office of Government Services released a usability analysis of federal government Web sites. In addition, in February, Vice-President Cheney announced the release of a report detailing…

  11. ASSESSING INTERNAL CONTAMINATION AFTER THE DETONATION OF A RADIOLOGICAL DISPERSION DEVICE USING A 2×2-INCH SODIUM IODIDE DETECTOR

    PubMed Central

    Dewji, S.; Hertel, N.; Ansari, A.

    2017-01-01

    The detonation of a radiological dispersion device may result in a situation where individuals inhale radioactive materials and require rapid assessment of internal contamination. The feasibility of using a 2×2-inch sodium-iodide detector to determine the committed effective dose to an individual following acute inhalation of gamma-emitting radionuclides was investigated. Experimental configurations of point sources with a polymethyl methacrylate slab phantom were used to validate Monte Carlo simulations. The validated detector model was used to simulate the responses for four detector positions on six different anthropomorphic phantoms. The nuclides examined included 241Am, 60Co, 137Cs, 131I and 192Ir. Biokinetic modelling was employed to determine the distributed activity in the body as a function of post-inhalation time. The simulation and biokinetic data were used to determine time-dependent count-rate values at optimal detector locations on the body for each radionuclide corresponding to a target committed effective dose (E50) value of 250 mSv. PMID:23436621

  12. Governing the moral economy: Animal engineering, ethics and the liberal government of science

    PubMed Central

    Harvey, Alison; Salter, Brian

    2012-01-01

    The preferred Western model for science governance has come to involve attending to the perspectives of the public. In practice, however, this model has been criticised for failing to promote democracy along participatory lines. We argue that contemporary approaches to science policy making demonstrate less the failure of democracy and more the success of liberal modes of government in adapting to meet new governance challenges. Using a case study of recent UK policy debates on scientific work mixing human and animal biological material, we show first how a ‘moral economy’ is brought into being as a regulatory domain and second how this domain is governed to align cultural with scientific values. We suggest that it is through these practices that the state assures its aspirations for enhancing individual and collective prosperity through technological advance are met. PMID:22507952

  13. From Government to Governance? Forest Certification and Crisis Displacement in Ontario, Canada

    ERIC Educational Resources Information Center

    Hackett, Ryan

    2013-01-01

    Discussions of forest certification have tended to characterize certification systems as a prime example of the hollowing out of the state and a shift from government to governance. The continued contention that certification is a product of a retreating state has implications for how we understand democratic participation and fails to pay…

  14. Shared health governance.

    PubMed

    Ruger, Jennifer Prah

    2011-07-01

    Health and Social Justice (Ruger 2009a ) developed the "health capability paradigm," a conception of justice and health in domestic societies. This idea undergirds an alternative framework of social cooperation called "shared health governance" (SHG). SHG puts forth a set of moral responsibilities, motivational aspirations, and institutional arrangements, and apportions roles for implementation in striving for health justice. This article develops further the SHG framework and explains its importance and implications for governing health domestically.

  15. County Government in Georgia [And] Teacher's Manual for County Government in Georgia.

    ERIC Educational Resources Information Center

    Hepburn, Mary A.

    The student textbook and the teacher's manual focus on the services, organization, and funding of county government in Georgia. Designed to be used over a three to six week period, the textbook is arranged into six chapters. Chapter one discusses county government, its services, and its structure. Chapter two focuses on county officials and their…

  16. Student Participation in Governance

    ERIC Educational Resources Information Center

    Deegan, William L.; And Others

    1970-01-01

    The success of student government activities on any campus is significantly affected by the amount of student participation permitted in the institution's decision-making processes. The traditional" model of government--characterized by tokenism--often results in the separate jurisdictions" model-- characterized by fragmentation and interest…

  17. Approaching Moisture Recycling Governance

    NASA Astrophysics Data System (ADS)

    Keys, Patrick; Wang-Erlandsson, Lan; Gordon, Line; Galaz, Victor; Ebbesson, Jonas

    2017-04-01

    The spatial and temporal dynamics of water resources are a continuous challenge for effective and sustainable national and international governance. Despite the surface watershed being the typical unit of water management, recent advances in hydrology have revealed 'atmospheric watersheds' - otherwise known as precipitationsheds. Also, recent research has demonstrated that water flowing within a precipitationshed may be modified by land-use change in one location, while the effect of this modification could be felt in a different province, nation, or continent. Notwithstanding these insights, the major legal and institutional implications of modifying moisture recycling have remained unexplored. In this presentation, we examine potential approaches to moisture recycling governance. We first identify a set of international study regions, and then develop a typology of moisture recycling relationships within these regions ranging from bilateral moisture exchange to more complex networks. This enables us to classify different types of legal and institutional governance principles. Likewise, we relate the moisture recycling types to existing land and water governance frameworks and management practices. The complexity of moisture recycling means institutional fit will be difficult to generalize for all moisture recycling relationships, but our typology allows the identification of characteristics that make effective governance of these normally ignored water flows more tenable.

  18. The essence of governance in health development.

    PubMed

    Kirigia, Joses Muthuri; Kirigia, Doris Gatwiri

    2011-03-28

    Governance and leadership in health development are critically important for the achievement of the health Millennium Development Goals (MDGs) and other national health goals. Those two factors might explain why many countries in Africa are not on track to attain the health MDGs by 2015. This paper debates the meaning of 'governance in health development', reviews briefly existing governance frameworks, proposes a modified framework on health development governance (HDG), and develops a HDG index. We argue that unlike 'leadership in health development', 'governance in health development' is the sole prerogative of the Government through the Ministry of Health, which can choose to delegate (but not abrogate) some of the governance tasks. The general governance domains of the UNDP and the World Bank are very pertinent but not sufficient for assessment of health development governance. The WHO six domains of governance do not include effective external partnerships for health, equity in health development, efficiency in resource allocation and use, ethical practises in health research and service provision, and macroeconomic and political stability. The framework for assessing health systems governance developed by Siddiqi et al also does not include macroeconomic and political stability as a separate principle. The Siddiqi et al framework does not propose a way of scoring the various governance domains to facilitate aggregation, inter-country comparisons and health development governance tracking over time.This paper argues for a broader health development governance framework because other sectors that assure human rights to education, employment, food, housing, political participation, and security combined have greater impact on health development than the health systems. It also suggests some amendments to Siddigi et al's framework to make it more relevant to the broader concept of 'governance in health development' and to the WHO African Region context. A strong

  19. The essence of governance in health development

    PubMed Central

    2011-01-01

    Background Governance and leadership in health development are critically important for the achievement of the health Millennium Development Goals (MDGs) and other national health goals. Those two factors might explain why many countries in Africa are not on track to attain the health MDGs by 2015. This paper debates the meaning of 'governance in health development', reviews briefly existing governance frameworks, proposes a modified framework on health development governance (HDG), and develops a HDG index. Discussion We argue that unlike 'leadership in health development', 'governance in health development' is the sole prerogative of the Government through the Ministry of Health, which can choose to delegate (but not abrogate) some of the governance tasks. The general governance domains of the UNDP and the World Bank are very pertinent but not sufficient for assessment of health development governance. The WHO six domains of governance do not include effective external partnerships for health, equity in health development, efficiency in resource allocation and use, ethical practises in health research and service provision, and macroeconomic and political stability. The framework for assessing health systems governance developed by Siddiqi et al also does not include macroeconomic and political stability as a separate principle. The Siddiqi et al framework does not propose a way of scoring the various governance domains to facilitate aggregation, inter-country comparisons and health development governance tracking over time. This paper argues for a broader health development governance framework because other sectors that assure human rights to education, employment, food, housing, political participation, and security combined have greater impact on health development than the health systems. It also suggests some amendments to Siddigi et al's framework to make it more relevant to the broader concept of 'governance in health development' and to the WHO African

  20. Data governance for health care providers.

    PubMed

    Andronis, Katerina; Moysey, Kevin

    2013-01-01

    Data governance is characterised from broader definitions of governance. These characteristics are then mapped to a framework that provides a practical representation of the concepts. This representation is further developed with operating models and roles. Several information related scenarios covering both clinical and non-clinical domains are considered in information terms and then related back to the data governance framework. This assists the reader in understanding how data governance would help address the issues or achieve a better outcome. These elements together enable the reader to gain an understanding of the data governance framework and how it applies in practice. Finally, some practical advice is offered for establishing and operating data governance as well as approaches for justifying the investment.

  1. Transient analysis of ”2 inch Direct Vessel Injection line break” in SPES-2 facility by using TRACE code

    NASA Astrophysics Data System (ADS)

    D'Amico, S.; Lombardo, C.; Moscato, I.; Polidori, M.; Vella, G.

    2015-11-01

    In the past few decades a lot of theoretical and experimental researches have been done to understand the physical phenomena characterizing nuclear accidents. In particular, after the Three Miles Island accident, several reactors have been designed to handle successfully LOCA events. This paper presents a comparison between experimental and numerical results obtained for the “2 inch Direct Vessel Injection line break” in SPES-2. This facility is an integral test facility built in Piacenza at the SIET laboratories and simulating the primary circuit, the relevant parts of the secondary circuits and the passive safety systems typical of the AP600 nuclear power plant. The numerical analysis here presented was performed by using TRACE and CATHARE thermal-hydraulic codes with the purpose of evaluating their prediction capability. The main results show that the TRACE model well predicts the overall behaviour of the plant during the transient, in particular it is able to simulate the principal thermal-hydraulic phenomena related to all passive safety systems. The performance of the presented CATHARE noding has suggested some possible improvements of the model.

  2. Governing the moral economy: animal engineering, ethics and the liberal government of science.

    PubMed

    Harvey, Alison; Salter, Brian

    2012-07-01

    The preferred Western model for science governance has come to involve attending to the perspectives of the public. In practice, however, this model has been criticised for failing to promote democracy along participatory lines. We argue that contemporary approaches to science policy making demonstrate less the failure of democracy and more the success of liberal modes of government in adapting to meet new governance challenges. Using a case study of recent UK policy debates on scientific work mixing human and animal biological material, we show first how a 'moral economy' is brought into being as a regulatory domain and second how this domain is governed to align cultural with scientific values. We suggest that it is through these practices that the state assures its aspirations for enhancing individual and collective prosperity through technological advance are met. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Learning Democratic Global Governance.

    ERIC Educational Resources Information Center

    Haavelsrud, Magnus

    1996-01-01

    Outlines a model process of developing knowledge from within different groups and cultures to allow more equitable participation of all world societies in the definition of global governance. Reviews concepts relevant to education's contributions toward learning and creating democratic global governance. Discusses the educational utility of…

  4. Educational Governance in Denmark

    ERIC Educational Resources Information Center

    Moos, Lejf

    2014-01-01

    Denmark has entered global competition by expanding collaboration with European countries, which is profoundly impacting the public sector and school governance. Relations between the state and institutions are transforming from traditional democratic, public-sector models of governance into new forms characterized as corporate and market-driven…

  5. 31 CFR 542.305 - Government of Syria.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Government of Syria. 542.305 Section....305 Government of Syria. The term Government of Syria includes: (a) The state and the Government of... foregoing, including any corporation, partnership, association, or other entity in which the Government of...

  6. 31 CFR 570.304 - Government of Libya.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Government of Libya. 570.304 Section....304 Government of Libya. The term Government of Libya includes: (a) The state and the Government of... property of persons falling within the definition of the term Government of Libya are blocked pursuant to...

  7. 31 CFR 570.304 - Government of Libya.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Government of Libya. 570.304 Section....304 Government of Libya. The term Government of Libya includes: (a) The state and the Government of... property of persons falling within the definition of the term Government of Libya are blocked pursuant to...

  8. 31 CFR 570.304 - Government of Libya.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Government of Libya. 570.304 Section....304 Government of Libya. The term Government of Libya includes: (a) The state and the Government of... property of persons falling within the definition of the term Government of Libya are blocked pursuant to...

  9. State and local governments

    NASA Technical Reports Server (NTRS)

    Barnes, Dennis

    1990-01-01

    The Virginia Space Grant Consortium approach to a close working relation to state and local governments is presented as a model for consideration. State government relations are especially important in that this is a primary resource in securing matching funds. Avenues for establishing these relationships are listed and discussed.

  10. Flutter tests (IS4) of the 0.0125-scale shuttle reflection plane model 30-OTS in the Langley Research Center 26-inch transonic blowdown tunnel test no. 547

    NASA Technical Reports Server (NTRS)

    Kotch, M. A.

    1974-01-01

    A series of slab wing flutter models with rigid orbiter fuselage, external tank, and SRB models of the space shuttle were tested, in a reflection plane arrangement, in the NASA Langley Research Center's 26-inch Transonic Blowdown Tunnel. Model flutter boundaries were obtained for both a wing-alone configuration and a wing-with-orbiter, tank and SRB configuration. Additional test points were taken of the wing-with-orbiter configuration, as a correlation with the wing-alone condition. A description of the wind tunnel models and test procedures utilized in the experiment are provided.

  11. Government Patent Policy: an Analysis of the Effects of Three Alternative Patent Policies on Technology of Government Inventions

    NASA Technical Reports Server (NTRS)

    Matousek, M.

    1979-01-01

    The effects of present and proposed Government patent policies on the process of technology transfer and the commercialization of inventions resulting from Government sponsored research are addressed. The function of the patent system in Government research and the value of patents resulting from government sponsored research are examined. Three alternative patent policies, title in the contractor, title in the Government, and the waiver policy, are examined in terms of their effect on the commercialization of inventions, industrial competitions, disclosure of inventions, participation of research contractors and administrative costs. Efforts to reform the present Government patent policy are also described.

  12. Enterprise Imaging Governance: HIMSS-SIIM Collaborative White Paper.

    PubMed

    Roth, Christopher J; Lannum, Louis M; Joseph, Carol L

    2016-10-01

    Enterprise imaging governance is an emerging need in health enterprises today. This white paper highlights the decision-making body, framework, and process for optimal enterprise imaging governance inclusive of five areas of focus: program governance, technology governance, information governance, clinical governance, and financial governance. It outlines relevant parallels and differences when forming or optimizing imaging governance as compared with other established broad horizontal governance groups, such as for the electronic health record. It is intended for CMIOs and health informatics leaders looking to grow and govern a program to optimally capture, store, index, distribute, view, exchange, and analyze the images of their enterprise.

  13. Groundwater governance in Asia: present state and barriers to implementation of good governance

    NASA Astrophysics Data System (ADS)

    Tanaka, T.

    2014-09-01

    The present state of groundwater governance in Asia was reviewed. The main problem regarding groundwater resources in each Asian country is overexploitation, causing water level decline, land subsidence and salt water intrusion. For those groundwater hazards, many countries have established regulations such as laws and regulations as countermeasures. However, those laws and regulations are not the basic laws on groundwater resources, but only for countermeasures to prevent groundwater hazards. Common problems and barriers for implementing groundwater governance in Asian countries are that there is more than one institute with different and sometimes overlapping responsibilities in groundwater management. To overcome those conflicts among institutions and establishment of good governance, it is necessary to establish an agency in the government as one coordinate function reinforcing the direct coordination and facilitation of groundwater policy-making and management. As one such framework, the conceptual law called the Water Cycle Basic Law, which is under planning in Japan, is examined in this paper.

  14. Government Quality Conference Proceedings

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The Government Quality Conference was an attempt to bring together executive organizations and senior individuals in the Federal Government that have a desire to improve productivity. It was designed to provide an exchange of ideas based on experience, and to encourage individual management initiatives to tap the capabilities of Federal employees.

  15. Clinical governance. Onus points.

    PubMed

    Malbon, G; Gillam, S; Mays, N

    1998-11-19

    A survey of lead GPs in total purchasing pilots revealed poor understanding of the responsibilities of clinical governance. Many saw it in a negative light and were concerned about its administrative costs. Explicit guidance is needed, spelling out the clinical governance responsibilities of GPs and others in primary care groups.

  16. Toward an E-Government Semantic Platform

    NASA Astrophysics Data System (ADS)

    Sbodio, Marco Luca; Moulin, Claude; Benamou, Norbert; Barthès, Jean-Paul

    This chapter describes the major aspects of an e-government platform in which semantics underpins more traditional technologies in order to enable new capabilities and to overcome technical and cultural challenges. The design and development of such an e-government Semantic Platform has been conducted with the financial support of the European Commission through the Terregov research project: "Impact of e-government on Territorial Government Services" (Terregov 2008). The goal of this platform is to let local government and government agencies offer online access to their services in an interoperable way, and to allow them to participate in orchestrated processes involving services provided by multiple agencies. Implementing a business process through an electronic procedure is indeed a core goal in any networked organization. However, the field of e-government brings specific constraints to the operations allowed in procedures, especially concerning the flow of private citizens' data: because of legal reasons in most countries, such data are allowed to circulate only from agency to agency directly. In order to promote transparency and responsibility in e-government while respecting the specific constraints on data flows, Terregov supports the creation of centrally controlled orchestrated processes; while the cross agencies data flows are centrally managed, data flow directly across agencies.

  17. Governance and human resources for health.

    PubMed

    Dieleman, Marjolein; Hilhorst, Thea

    2011-11-24

    Despite an increase in efforts to address shortage and performance of Human Resources for Health (HRH), HRH problems continue to hamper quality service delivery. We believe that the influence of governance is undervalued in addressing the HRH crisis, both globally and at country level. This thematic series has aimed to expand the evidence base on the role of governance in addressing the HRH crisis. The six articles comprising the series present a range of experiences. The articles report on governance in relation to developing a joint vision, building adherence and strengthening accountability, and on governance with respect to planning, implementation, and monitoring. Other governance issues warrant attention as well, such as corruption and transparency in decision-making in HRH policies and strategies. Acknowledging and dealing with governance should be part and parcel of HRH planning and implementation. To date, few experiences have been shared on improving governance for HRH policy making and implementation, and many questions remain unanswered. There is an urgent need to document experiences and for mutual learning.

  18. Governance.

    ERIC Educational Resources Information Center

    Moran, K. D.

    Chapter 1 of a book on school law, this chapter summarizes 1979 cases related to school governance in several areas: authority of state boards of education and other governmental agencies, authority of state superintendents of education, powers and duties of school boards, open meeting laws, constitutional matters, conflicts of interest on the…

  19. Does Government Funding Alter Nonprofit Governance? Evidence from New York City Nonprofit Contractors

    ERIC Educational Resources Information Center

    O'Regan, Katherine; Oster, Sharon

    2002-01-01

    Government contracting has raised a collection of issues with respect to adequate oversight and accountability. This paper explores one avenue through which contracting agencies may achieve these tasks: through the governance practices of the contractor's board. Oversight and monitoring are a board's key responsibilities, and influencing a board's…

  20. 41 CFR 102-34.110 - Must Government motor vehicles use Government license plates?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Must Government motor vehicles use Government license plates? 102-34.110 Section 102-34.110 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 34-MOTOR VEHICLE MANAGEMENT...

  1. Global Governance, Educational Change

    ERIC Educational Resources Information Center

    Mundy, Karen

    2007-01-01

    In the last half decade, a rising literature has focused on the idea that processes of economic, political and social globalization require analysis in terms of governance at the global level. It is argued in this article that emerging forms of global governance have produced significant challenges to conventional conceptions of international…

  2. Comparison as Curriculum Governance: Dynamics of the European-Wide Governance Technology of Comparison within England's National Curriculum Reforms

    ERIC Educational Resources Information Center

    Papanastasiou, Natalie

    2012-01-01

    The curriculum is a governance technology of knowledge production and is also itself governed by complex dynamics within European education policy space. This article focuses on how the curriculum is governed by comparative knowledge; in particular, it identifies how this facet of governance has manifested itself within the policy space of…

  3. The Aerostructures Test Wing (ATW), which consisted of an 18-inch carbon fiber test wing with surface-mounted piezoelectric strain actuators, was mounted on a special ventral flight test fixture and flown on Dryden's F-15B Research Testbed aircraft

    NASA Image and Video Library

    2001-03-28

    The Aerostructures Test Wing (ATW), which consisted of an 18-inch carbon fiber test wing with surface-mounted piezoelectric strain actuators, was mounted on a special ventral flight test fixture and flown on Dryden's F-15B Research Testbed aircraft

  4. Transformative governance of urban social-ecological systems

    EPA Science Inventory

    A central aspect of adaptive governance is a learning process that can help communities achieve environmental objectives. Adaptive governance is a framework for managing social-ecological systems, and is the precursor to transformative governance. Adaptive governance accounts for...

  5. Copyright in Government Employee Works

    DTIC Science & Technology

    1981-01-01

    NUMBERS Copyright in Government Employee Works 5. AUTHOR(S) John 0. Tresansky 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING...COPYRIGHT IN GOVERNMENT EMPLOYEE AUTHORED WORKS* John 0. Tresansky* The Copyright Act of 1976’ continues the prohibition enunciated in the Copyright...expression to a "work prepared by an officer or employee of the United States Government as part of that person’s official duties.ś Difficulties arise

  6. 42 CFR 137.211 - How does a Self-Governance Tribe learn whether self-governance activities have resulted in...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false How does a Self-Governance Tribe learn whether self-governance activities have resulted in savings as described in § 137.210. 137.211 Section 137.211 Public... a Self-Governance Tribe learn whether self-governance activities have resulted in savings as...

  7. 42 CFR 137.211 - How does a Self-Governance Tribe learn whether self-governance activities have resulted in...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false How does a Self-Governance Tribe learn whether self-governance activities have resulted in savings as described in § 137.210. 137.211 Section 137.211 Public... a Self-Governance Tribe learn whether self-governance activities have resulted in savings as...

  8. Governance.

    ERIC Educational Resources Information Center

    Moran, K. D.

    This chapter summarized and analyzes all state supreme court and federal court decisions as well as other significant court decisions affecting the realm of school governance. The cases discussed are generally limited to those decided during 1974 and reported in the General Digest on or before March 1, 1975. Because of its unusual significance,…

  9. 48 CFR 246.406 - Foreign governments.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

  10. 48 CFR 836.572 - Government supervision.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Government supervision... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 836.572 Government supervision. The contracting officer shall insert the clause at 852.236-78, Government supervision, in...

  11. 48 CFR 836.572 - Government supervision.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Government supervision... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 836.572 Government supervision. The contracting officer shall insert the clause at 852.236-78, Government supervision, in...

  12. 48 CFR 246.406 - Foreign governments.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

  13. 48 CFR 836.572 - Government supervision.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Government supervision... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 836.572 Government supervision. The contracting officer shall insert the clause at 852.236-78, Government supervision, in...

  14. 5 CFR 890.501 - Government contributions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 2 2012-01-01 2012-01-01 false Government contributions. 890.501 Section... (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Contributions and Withholdings § 890.501 Government contributions. (a) The Government contribution toward subscription charges under all health benefits plans, for...

  15. 48 CFR 246.406 - Foreign governments.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

  16. 48 CFR 836.572 - Government supervision.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Government supervision... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 836.572 Government supervision. The contracting officer shall insert the clause at 852.236-78, Government supervision, in...

  17. 48 CFR 836.572 - Government supervision.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Government supervision... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 836.572 Government supervision. The contracting officer shall insert the clause at 852.236-78, Government supervision, in...

  18. 5 CFR 890.501 - Government contributions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Government contributions. 890.501 Section... (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Contributions and Withholdings § 890.501 Government contributions. (a) The Government contribution toward subscription charges under all health benefits plans, for...

  19. 5 CFR 890.501 - Government contributions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 2 2014-01-01 2014-01-01 false Government contributions. 890.501 Section... (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Contributions and Withholdings § 890.501 Government contributions. (a) The Government contribution toward subscription charges under all health benefits plans, for...

  20. 5 CFR 890.501 - Government contributions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Government contributions. 890.501 Section... (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Contributions and Withholdings § 890.501 Government contributions. (a) The Government contribution toward subscription charges under all health benefits plans, for...

  1. 48 CFR 246.406 - Foreign governments.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

  2. 48 CFR 246.406 - Foreign governments.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Foreign governments. 246..., DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.406 Foreign governments. (1) Quality assurance among North Atlantic Treaty Organization (NATO) countries. (i...

  3. 5 CFR 890.501 - Government contributions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 2 2013-01-01 2013-01-01 false Government contributions. 890.501 Section... (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Contributions and Withholdings § 890.501 Government contributions. (a) The Government contribution toward subscription charges under all health benefits plans, for...

  4. Governing Public Universities in Arab Countries

    ERIC Educational Resources Information Center

    ElObeidy, Ahmed A.

    2014-01-01

    Traditionally in Arab public universities, presidents are appointed by government authorities. Recently, in uprising Arab countries universities' presidents have been elected by universities' faculty members. Neither traditional nor self-governance pattern succeeded to modernise Arab universities. Reforming patterns of governance is critical for…

  5. Local Government Solar Project Portal

    EPA Pesticide Factsheets

    The Local Government Solar Project Portal provides step-by-step guidance and resources to assist local governments in solar project development, including case studies, fact sheets, presentations, templates, and more.

  6. 48 CFR 47.207-8 - Government responsibilities.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Government....207-8 Government responsibilities. (a) The contracting officer shall state clearly the Government's... Government's responsibility to notify the contractor in advance when hazardous materials are included in a...

  7. 48 CFR 1545.107 - Government property clauses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Government property... CONTRACT MANAGEMENT GOVERNMENT PROPERTY General 1545.107 Government property clauses. (a) The Contracting... use Government-furnished or Contractor-acquired property in the cleanup of hazardous material as...

  8. 48 CFR 1545.107 - Government property clauses.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Government property... CONTRACT MANAGEMENT GOVERNMENT PROPERTY General 1545.107 Government property clauses. (a) The Contracting... use Government-furnished or Contractor-acquired property in the cleanup of hazardous material as...

  9. 48 CFR 47.207-8 - Government responsibilities.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Government....207-8 Government responsibilities. (a) The contracting officer shall state clearly the Government's... Government's responsibility to notify the contractor in advance when hazardous materials are included in a...

  10. 48 CFR 47.207-8 - Government responsibilities.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Government....207-8 Government responsibilities. (a) The contracting officer shall state clearly the Government's... Government's responsibility to notify the contractor in advance when hazardous materials are included in a...

  11. 48 CFR 47.207-8 - Government responsibilities.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Government....207-8 Government responsibilities. (a) The contracting officer shall state clearly the Government's... Government's responsibility to notify the contractor in advance when hazardous materials are included in a...

  12. 48 CFR 47.207-8 - Government responsibilities.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Government....207-8 Government responsibilities. (a) The contracting officer shall state clearly the Government's... Government's responsibility to notify the contractor in advance when hazardous materials are included in a...

  13. SOA governance in healthcare organisations.

    PubMed

    Koumaditis, Konstantinos; Themistocleous, Marinos; Vassilakopoulos, Georgios

    2013-01-01

    Service Oriented Architecture (SOA) is increasingly adopted by many sectors, including healthcare. Due to the nature of healthcare systems there is a need to increase SOA adoption success rates as the non integrated nature of healthcare systems is responsible for medical errors that cause the loss of tens of thousands patients per year. Following our previous research [1] we propose that SOA governance is a critical success factor for SOA success in healthcare. Literature reports multiple SOA governance models that have limitations and they are confusing. In addition to this, there is a lack of healthcare specific SOA governance models. This highlights a literature void and thus the purpose of this paper is to proposed a healthcare specific SOA governance framework.

  14. Technology transfer within the government

    NASA Technical Reports Server (NTRS)

    Russell, John

    1992-01-01

    The report of a workshop panel concerned with technology transfer within the government is presented. The presentation is made in vugraph form. The assigned subtopic for this panel are as follows: (1) transfer from non-NASA US government technology developers to NASA space missions/programs; and (2) transfer from NASA to other US government space mission programs. A specific area of inquiry was Technology Maturation Milestones. Three areas were investigated: technology development; advanced development; and flight hardware development.

  15. Improve Governance for Charters

    ERIC Educational Resources Information Center

    Finn, Chester E., Jr.; Manno, Bruno V.; Wright, Brandon L.

    2017-01-01

    With 25 years of experience, the charter sector has had enough time to experience a host of unanticipated and unresolved problems related to the complex ways in which charter school governance relates to school leadership. The time has come for the sector to revisit some fundamental decisions about how charter schools and networks are governed,…

  16. Do reimbursement recommendation processes used by government drug plans in Canada adhere to good governance principles?

    PubMed

    Rawson, Nigel Sb; Adams, John

    2017-01-01

    In democratic societies, good governance is the key to assuring the confidence of stakeholders and other citizens in how governments and organizations interact with and relate to them and how decisions are taken. Although defining good governance can be debatable, the United Nations Development Program (UNDP) set of principles is commonly used. The reimbursement recommendation processes of the Canadian Agency for Drugs and Technologies in Health (CADTH), which carries out assessments for all public drug plans outside Quebec, are examined in the light of the UNDP governance principles and compared with the National Institute for Health and Care Excellence system in England. The adherence of CADTH's processes to the principles of accountability, transparency, participatory, equity, responsiveness and consensus is poor, especially when compared with the English system, due in part to CADTH's lack of genuine independence. CADTH's overriding responsibility is toward the governments that "own," fund and manage it, while the agency's status as a not-for-profit corporation under federal law protects it from standard government forms of accountability. The recent integration of CADTH's reimbursement recommendation processes with the provincial public drug plans' collective system for price negotiation with pharmaceutical companies reinforces CADTH's role as a nonindependent partner in the pursuit of governments' cost-containment objectives, which should not be part of its function. Canadians need a national organization for evaluating drugs for reimbursement in the public interest that fully embraces the principles of good governance - one that is publicly accountable, transparent and fair and includes all stakeholders throughout its processes.

  17. 31 CFR 596.310 - Terrorism List Government.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Terrorism List Government. 596.310... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.310 Terrorism List Government. The term Terrorism List Government...

  18. 31 CFR 596.310 - Terrorism List Government.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Terrorism List Government. 596.310... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.310 Terrorism List Government. The term Terrorism List Government...

  19. 31 CFR 596.310 - Terrorism List Government.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Terrorism List Government. 596.310... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.310 Terrorism List Government. The term Terrorism List Government...

  20. 31 CFR 596.310 - Terrorism List Government.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Terrorism List Government. 596.310... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.310 Terrorism List Government. The term Terrorism List Government...

  1. 31 CFR 596.310 - Terrorism List Government.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Terrorism List Government. 596.310... OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY TERRORISM LIST GOVERNMENTS SANCTIONS REGULATIONS General Definitions § 596.310 Terrorism List Government. The term Terrorism List Government...

  2. 48 CFR 2452.227-70 - Government information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Government information... 2452.227-70 Government information. As prescribed in 2427.470, use the following clause: Government Information (DEC 2012) (a) Definitions. As used in this clause, “Government information” includes— Contractor...

  3. 48 CFR 2452.227-70 - Government information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Government information... 2452.227-70 Government information. As prescribed in 2427.470, use the following clause: Government Information (DEC 2012) (a) Definitions. As used in this clause, “Government information” includes— Contractor...

  4. 2 inch size Czochralski growth and scintillation properties of Li+ co-doped Ce:Gd3Ga3Al2O12

    NASA Astrophysics Data System (ADS)

    Kamada, Kei; Shoji, Yasuhiro; Kochurikhin, Vladimir V.; Yoshino, Masao; Okumura, Satoshi; Yamamoto, Seiichi; Yeom, Jung Yeol; Kurosawa, Shunsuke; Yokota, Yuui; Ohashi, Yuji; Nikl, Martin; Yoshino, Masao; Yoshikawa, Akira

    2017-03-01

    The 2 inch size Li 0.15 and 1.35 mol% co-doped Ce:Gd3Al2Ga3O12 single crystals were prepared by the Czochralski (Cz) method. Absorption and luminescence spectra were measured together with several other scintillation characteristics, namely the scintillation decay and light yield to reveal the effect of Li co-doping. Ce4+ CT absorption below 350 nm is clearly enhanced by Li co-doping as same as divalent ions co-doping. By 1.35 at.% Li co-doping, light yield was decrease to 88% of the Ce: GAGG standard and decay time was accelerated to 34.3ns 21.0%, 84.6ns 68.7%, 480ns 10.3%. The timing resolution measurement for a pair of 3 × 3 × 3mm3 size Li,Ce:GAGG scintillator crystals was performed using Si-PMs and the timing resolution of the 1.35 at.% Li co-doped Ce:GAGG was 218ps.

  5. Biographical Information and Other Government Secrets.

    ERIC Educational Resources Information Center

    Conger, Lucinda D.

    1981-01-01

    Covers relevant biographical sources for diplomatic, foreign, and American government personnel, including online services, monographs, back files, the card catalog, State Department and CIA publications, other government documents, and trade publications. Lists of CIA biographical directories and U.S. government agency press offices are appended.…

  6. 5 CFR 891.401 - Government contributions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Government contributions. 891.401 Section... (CONTINUED) RETIRED FEDERAL EMPLOYEES HEALTH BENEFITS Contributions and Withholdings § 891.401 Government... receive a Government contribution toward his or her cost of coverage for: (A) A private health insurance...

  7. 5 CFR 891.401 - Government contributions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 2 2012-01-01 2012-01-01 false Government contributions. 891.401 Section... (CONTINUED) RETIRED FEDERAL EMPLOYEES HEALTH BENEFITS Contributions and Withholdings § 891.401 Government... receive a Government contribution toward his or her cost of coverage for: (A) A private health insurance...

  8. 48 CFR 53.245 - Government property.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Government property. 53...) CLAUSES AND FORMS FORMS Prescription of Forms 53.245 Government property. The following forms are prescribed, as specified in this section, for use in reporting, reutilization, and disposal of Government...

  9. 5 CFR 891.401 - Government contributions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Government contributions. 891.401 Section... (CONTINUED) RETIRED FEDERAL EMPLOYEES HEALTH BENEFITS Contributions and Withholdings § 891.401 Government... receive a Government contribution toward his or her cost of coverage for: (A) A private health insurance...

  10. 48 CFR 53.245 - Government property.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false Government property. 53...) CLAUSES AND FORMS FORMS Prescription of Forms 53.245 Government property. The following forms are prescribed, as specified in this section, for use in reporting, reutilization, and disposal of Government...

  11. 48 CFR 53.245 - Government property.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false Government property. 53...) CLAUSES AND FORMS FORMS Prescription of Forms 53.245 Government property. The following forms are prescribed, as specified in this section, for use in reporting, reutilization, and disposal of Government...

  12. 5 CFR 891.401 - Government contributions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 2 2014-01-01 2014-01-01 false Government contributions. 891.401 Section... (CONTINUED) RETIRED FEDERAL EMPLOYEES HEALTH BENEFITS Contributions and Withholdings § 891.401 Government... receive a Government contribution toward his or her cost of coverage for: (A) A private health insurance...

  13. 5 CFR 891.401 - Government contributions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 2 2013-01-01 2013-01-01 false Government contributions. 891.401 Section... (CONTINUED) RETIRED FEDERAL EMPLOYEES HEALTH BENEFITS Contributions and Withholdings § 891.401 Government... receive a Government contribution toward his or her cost of coverage for: (A) A private health insurance...

  14. 48 CFR 53.245 - Government property.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false Government property. 53...) CLAUSES AND FORMS FORMS Prescription of Forms 53.245 Government property. The following forms are prescribed, as specified in this section, for use in reporting, reutilization, and disposal of Government...

  15. 48 CFR 53.245 - Government property.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false Government property. 53...) CLAUSES AND FORMS FORMS Prescription of Forms 53.245 Government property. The following forms are prescribed, as specified in this section, for use in reporting, reutilization, and disposal of Government...

  16. 27 CFR 19.282 - Breaking Government locks.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Breaking Government locks... Breaking Government locks. Where affixed, Government locks shall not be removed without the authorization... obtain authorization from an appropriate TTB officer, Government locks may be removed, by the proprietor...

  17. 24 CFR 570.486 - Local government requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 3 2011-04-01 2010-04-01 true Local government requirements. 570... Development Block Grant Program § 570.486 Local government requirements. (a) Citizen participation requirements of a unit of general local government. Each unit of general local government shall meet the...

  18. 24 CFR 570.486 - Local government requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 3 2013-04-01 2013-04-01 false Local government requirements. 570... Development Block Grant Program § 570.486 Local government requirements. (a) Citizen participation requirements of a unit of general local government. Each unit of general local government shall meet the...

  19. Balancing stability and flexibility in adaptive governance: an ...

    EPA Pesticide Factsheets

    Adaptive governance must work “on the ground,” that is, it must operate through structures and procedures that the people it governs perceive to be legitimate and fair, as well as incorporating processes and substantive goals that are effective in allowing social-ecological systems (SESs) to adapt to climate change and other impacts. To address the continuing and accelerating alterations that climate change is bringing to SESs, adaptive governance generally will require more flexibility than prior governance institutions have often allowed. However, to function as good governance, adaptive governance must pay real attention to the problem of how to balance this increased need for flexibility with continuing governance stability so that it can foster adaptation to change without being perceived or experienced as perpetually destabilizing, disruptive, and unfair. Flexibility and stability serve different purposes in governance, and a variety of tools exist to strike different balances between them while still preserving the governance institution’s legitimacy among the people governed. After reviewing those purposes and the implications of climate change for environmental governance, we examine psychological insights into the structuring of adaptive governance and the variety of legal tools available to incorporate those insights into adaptive governance regimes. Because the substantive goals of governance systems will differ among specific systems, we do no

  20. Governance Must Dive Into Organizations to Make a Real Difference Comment on "Governance, Government, and the Search for New Provider Models".

    PubMed

    Denis, Jean-Louis; Usher, Susan

    2016-07-03

    In their 2016 article, Saltman and Duran provide a thoughtful examination of the governance challenges involved in different care delivery models adopted in primary care and hospitals in two European countries. This commentary examines the limited potential of structural changes to achieve real reform and considers that, unless governance arrangements actually succeed in penetrating organizations, they are unlikely to improve care. It proposes three sets of levers influenced by governance that have potential to influence what happens at the point of care: harnessing the autonomy and expertise of professionals at a collective level to work towards better safety and quality; creating enabling contexts for cross-fertilization of clinical and organizational expertise, notably through teamwork; and patient and public engagement to achieve greater agreement on improvement priorities and overcome provider/manager tensions. Good governance provides guidance at a distance but also goes deep enough to influence clinical habits. © 2017 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

  1. 16 CFR 460.21 - Government claims.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Government claims. 460.21 Section 460.21 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.21 Government claims. Do not say or imply that a government agency uses, certifies...

  2. 16 CFR 460.21 - Government claims.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Government claims. 460.21 Section 460.21 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.21 Government claims. Do not say or imply that a government agency uses, certifies...

  3. 19 CFR 111.33 - Government records.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 19 Customs Duties 1 2012-04-01 2012-04-01 false Government records. 111.33 Section 111.33 Customs... CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.33 Government records. A broker must not procure or attempt to procure, directly or indirectly, information from Government records or...

  4. 19 CFR 111.33 - Government records.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 19 Customs Duties 1 2013-04-01 2013-04-01 false Government records. 111.33 Section 111.33 Customs... CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.33 Government records. A broker must not procure or attempt to procure, directly or indirectly, information from Government records or...

  5. 49 CFR 372.223 - Consolidated governments.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 5 2012-10-01 2012-10-01 false Consolidated governments. 372.223 Section 372.223... ZONES, AND TERMINAL AREAS Commercial Zones § 372.223 Consolidated governments. The zone adjacent to, and commercially a part of a consolidated government within which transportation by motor vehicle, in interstate or...

  6. 16 CFR 460.21 - Government claims.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Government claims. 460.21 Section 460.21 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.21 Government claims. Do not say or imply that a government agency uses, certifies...

  7. 7 CFR 97.154 - Government employees.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Government employees. 97.154 Section 97.154... PLANT VARIETY AND PROTECTION Attorneys and Agents § 97.154 Government employees. Officers and employees... attorneys or agents in proceedings or other matters before government departments or agencies, shall not be...

  8. 10 CFR 603.220 - Government participation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Government participation. 603.220 Section 603.220 Energy... Technology Investment Agreements § 603.220 Government participation. A TIA is used to carry out cooperative relationships between the Federal Government and the recipient(s) which require substantial involvement of the...

  9. 10 CFR 603.220 - Government participation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Government participation. 603.220 Section 603.220 Energy... Technology Investment Agreements § 603.220 Government participation. A TIA is used to carry out cooperative relationships between the Federal Government and the recipient(s) which require substantial involvement of the...

  10. 16 CFR 460.21 - Government claims.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Government claims. 460.21 Section 460.21 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.21 Government claims. Do not say or imply that a government agency uses, certifies...

  11. 19 CFR 111.33 - Government records.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 19 Customs Duties 1 2011-04-01 2011-04-01 false Government records. 111.33 Section 111.33 Customs... CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.33 Government records. A broker must not procure or attempt to procure, directly or indirectly, information from Government records or...

  12. 19 CFR 111.33 - Government records.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Government records. 111.33 Section 111.33 Customs... CUSTOMS BROKERS Duties and Responsibilities of Customs Brokers § 111.33 Government records. A broker must not procure or attempt to procure, directly or indirectly, information from Government records or...

  13. 49 CFR 372.223 - Consolidated governments.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Consolidated governments. 372.223 Section 372.223... ZONES, AND TERMINAL AREAS Commercial Zones § 372.223 Consolidated governments. The zone adjacent to, and commercially a part of a consolidated government within which transportation by motor vehicle, in interstate or...

  14. 16 CFR 460.21 - Government claims.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Government claims. 460.21 Section 460.21 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.21 Government claims. Do not say or imply that a government agency uses, certifies...

  15. 10 CFR 603.220 - Government participation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Government participation. 603.220 Section 603.220 Energy... Technology Investment Agreements § 603.220 Government participation. A TIA is used to carry out cooperative relationships between the Federal Government and the recipient(s) which require substantial involvement of the...

  16. 49 CFR 372.223 - Consolidated governments.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Consolidated governments. 372.223 Section 372.223... ZONES, AND TERMINAL AREAS Commercial Zones § 372.223 Consolidated governments. The zone adjacent to, and commercially a part of a consolidated government within which transportation by motor vehicle, in interstate or...

  17. 7 CFR 97.154 - Government employees.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Government employees. 97.154 Section 97.154... PLANT VARIETY AND PROTECTION Attorneys and Agents § 97.154 Government employees. Officers and employees... attorneys or agents in proceedings or other matters before government departments or agencies, shall not be...

  18. 7 CFR 97.154 - Government employees.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Government employees. 97.154 Section 97.154... PLANT VARIETY AND PROTECTION Attorneys and Agents § 97.154 Government employees. Officers and employees... attorneys or agents in proceedings or other matters before government departments or agencies, shall not be...

  19. 49 CFR 372.223 - Consolidated governments.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 5 2013-10-01 2013-10-01 false Consolidated governments. 372.223 Section 372.223... ZONES, AND TERMINAL AREAS Commercial Zones § 372.223 Consolidated governments. The zone adjacent to, and commercially a part of a consolidated government within which transportation by motor vehicle, in interstate or...

  20. 7 CFR 97.154 - Government employees.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Government employees. 97.154 Section 97.154... PLANT VARIETY AND PROTECTION Attorneys and Agents § 97.154 Government employees. Officers and employees... attorneys or agents in proceedings or other matters before government departments or agencies, shall not be...