Quantum Limits of Space-to-Ground Optical Communications
NASA Technical Reports Server (NTRS)
Hemmati, H.; Dolinar, S.
2012-01-01
For a pure loss channel, the ultimate capacity can be achieved with classical coherent states (i.e., ideal laser light): (1) Capacity-achieving receiver (measurement) is yet to be determined. (2) Heterodyne detection approaches the ultimate capacity at high mean photon numbers. (3) Photon-counting approaches the ultimate capacity at low mean photon numbers. A number of current technology limits drive the achievable performance of free-space communication links. Approaching fundamental limits in the bandwidth-limited regime: (1) Heterodyne detection with high-order coherent-state modulation approaches ultimate limits. SOA improvements to laser phase noise, adaptive optics systems for atmospheric transmission would help. (2) High-order intensity modulation and photon-counting can approach heterodyne detection within approximately a factor of 2. This may have advantages over coherent detection in the presence of turbulence. Approaching fundamental limits in the photon-limited regime (1) Low-duty cycle binary coherent-state modulation (OOK, PPM) approaches ultimate limits. SOA improvements to laser extinction ratio, receiver dark noise, jitter, and blocking would help. (2) In some link geometries (near field links) number-state transmission could improve over coherent-state transmission
NASA Technical Reports Server (NTRS)
Zipay, John J.; Modlin, C. Thomas, Jr.; Larsen, Curtis E.
2016-01-01
The ultimate factor of safety (FOSULT) concept used in aircraft and spacecraft has evolved over many decades. Currently an FOSULT 1.5 is the FAR-mandated value for aircraft while an FOSULT of 1.4 has been used in various spacecraft. This paper was motivated by the desire to concisely explain the origins, proper interpretation and application of the ultimate factor of safety concept, since the authors have seen throughout their careers many misconceptions and incorrect applications of this concept. The history of the ultimate factor of safety concept is briefly summarized, the proper application of the factor of safety in aircraft design, structural analysis and operations is covered in detail, examples of limit load exceedance in aircraft and spacecraft are discussed, the evolution of the 1.4 FOSULT for spacecraft is described and some misconceptions regarding the ultimate factor of safety concept are addressed. It is hoped that this paper can be a summary resource for engineers to understand the origin, purpose and proper application of the ultimate factor of safety.
Ultimate Gradient Limitation in Niobium Superconducting Accelerating Cavities
DOE Office of Scientific and Technical Information (OSTI.GOV)
Checchin, Mattia; Grassellino, Anna; Martinello, Martina
2016-06-01
The present study is addressed to the theoretical description of the ultimate gradient limitation in SRF cavities. Our intent is to exploit experimental data to confirm models which provide feed-backs on how to improve the current state-of-art. New theoretical insight on the cavities limiting factor can be suitable to improve the quench field of N-doped cavities, and therefore to take advantage of high Q 0 at high gradients.
Probing the Ultimate Limits of Plasmonic Enhancement
Ciracì, C.; Hill, R. T.; Mock, J. J.; Urzhumov, Y.; Fernández-Domínguez, A. I.; Maier, S. A.; Pendry, J. B.; Chilkoti, A.; Smith, D. R.
2013-01-01
Metals support surface plasmons at optical wavelengths and have the ability to localize light to sub-wavelength regions. The field enhancements that occur in these regions set the ultimate limitations on a wide range of nonlinear and quantum optical phenomena. Here we show that the dominant limiting factor is not the resistive loss of the metal, but the intrinsic nonlocality of its dielectric response. A semi-classical model of the electronic response of a metal places strict bounds on the ultimate field enhancement. We demonstrate the accuracy of this model by studying the optical scattering from gold nanoparticles spaced a few angstroms from a gold film. The bounds derived from the models and experiments impose limitations on all nanophotonic systems. PMID:22936772
Quantum Limits of Space-to-Ground Optical Communications
NASA Technical Reports Server (NTRS)
Hemmati, H.; Dolinar, S.
2012-01-01
Quantum limiting factors contributed by the transmitter, the optical channel, and the receiver of a space-to-ground optical communications link are described. Approaches to move toward the ultimate quantum limit are discussed.
14 CFR 23.785 - Seats, berths, litters, safety belts, and shoulder harnesses.
Code of Federal Regulations, 2014 CFR
2014-01-01
... combination of structural analysis and static load tests to limit load; or (3) Static load tests to ultimate... OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY... resulting from the ultimate static load factors prescribed in § 23.561(b)(2) of this part. Each occupant...
14 CFR 23.785 - Seats, berths, litters, safety belts, and shoulder harnesses.
Code of Federal Regulations, 2011 CFR
2011-01-01
... combination of structural analysis and static load tests to limit load; or (3) Static load tests to ultimate... OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY... resulting from the ultimate static load factors prescribed in § 23.561(b)(2) of this part. Each occupant...
14 CFR 23.785 - Seats, berths, litters, safety belts, and shoulder harnesses.
Code of Federal Regulations, 2010 CFR
2010-01-01
... combination of structural analysis and static load tests to limit load; or (3) Static load tests to ultimate... OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY... resulting from the ultimate static load factors prescribed in § 23.561(b)(2) of this part. Each occupant...
14 CFR 23.785 - Seats, berths, litters, safety belts, and shoulder harnesses.
Code of Federal Regulations, 2012 CFR
2012-01-01
... combination of structural analysis and static load tests to limit load; or (3) Static load tests to ultimate... OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY... resulting from the ultimate static load factors prescribed in § 23.561(b)(2) of this part. Each occupant...
14 CFR 23.785 - Seats, berths, litters, safety belts, and shoulder harnesses.
Code of Federal Regulations, 2013 CFR
2013-01-01
... combination of structural analysis and static load tests to limit load; or (3) Static load tests to ultimate... OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY... resulting from the ultimate static load factors prescribed in § 23.561(b)(2) of this part. Each occupant...
Fill factor in organic solar cells can exceed the Shockley-Queisser limit
NASA Astrophysics Data System (ADS)
Trukhanov, Vasily A.; Bruevich, Vladimir V.; Paraschuk, Dmitry Yu.
2015-06-01
The ultimate efficiency of organic solar cells (OSC) is under active debate. The solar cell efficiency is calculated from the current-voltage characteristic as a product of the open-circuit voltage (VOC), short-circuit current (JSC), and the fill factor (FF). While the factors limiting VOC and JSC for OSC were extensively studied, the ultimate FF for OSC is scarcely explored. Using numerical drift-diffusion modeling, we have found that the FF in OSC can exceed the Shockley-Queisser limit (SQL) established for inorganic p-n junction solar cells. Comparing charge generation and recombination in organic donor-acceptor bilayer heterojunction and inorganic p-n junction, we show that such distinctive properties of OSC as interface charge generation and heterojunction facilitate high FF, but the necessary condition for FF exceeding the SQL in OSC is field-dependence of charge recombination at the donor-acceptor interface. These findings can serve as a guideline for further improvement of OSC.
Code of Federal Regulations, 2010 CFR
2010-01-01
... load would significantly change the distribution of external or internal loads, this redistribution...) and ultimate loads (limit loads multiplied by prescribed factors of safety). Unless otherwise provided...
Nuclear-polarization correction to the bound-electron g factor in heavy hydrogenlike ions.
Nefiodov, A V; Plunien, G; Soff, G
2002-08-19
The influence of nuclear polarization on the bound-electron g factor in heavy hydrogenlike ions is investigated. Numerical calculations are performed for the K- and L-shell electrons taking into account the dominant virtual nuclear excitations. This determines the ultimate limit for tests of QED utilizing measurements of the bound-electron g factor in highly charged ions.
NASA Astrophysics Data System (ADS)
Tabataba-Vakili, Farsane; Roland, Iannis; Tran, Thi-Mo; Checoury, Xavier; El Kurdi, Moustafa; Sauvage, Sébastien; Brimont, Christelle; Guillet, Thierry; Rennesson, Stéphanie; Duboz, Jean-Yves; Semond, Fabrice; Gayral, Bruno; Boucaud, Philippe
2017-09-01
III-nitride-on-silicon L3 photonic crystal cavities with resonances down to 315 nm and quality factors (Q) up to 1085 at 337 nm have been demonstrated. The reduction of the quality factor with decreasing wavelength is investigated. Besides the quantum well absorption below 340 nm, a noteworthy contribution is attributed to the residual absorption present in thin AlN layers grown on silicon, as measured by spectroscopic ellipsometry. This residual absorption ultimately limits the Q factor to around 2000 at 300 nm when no active layer is present.
A Summary of Some Biochemistry and Thermal Aspects of Intelligence.
ERIC Educational Resources Information Center
Harmon, Darell Boyd
Because of the intensity factors involved in school tasks, and the importance of schooling in determining the child's future in this complex civilization, the energy organizations and physical limits of the classroom are probably the most significant of all the factors encountered in shaping the child's ultimate social form. Very little is known…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ronold, K.O.; Nielsen, N.J.R.; Tura, F.
This paper demonstrates how a structural reliability method can be applied as a rational means to analyze free spans of submarine pipelines with respect to failure in ultimate loading, and to establish partial safety factors for design of such free spans against this failure mode. It is important to note that the described procedure shall be considered as an illustration of a structural reliability methodology, and that the results do not represent a set of final design recommendations. A scope of design cases, consisting of a number of available site-specific pipeline spans, is established and is assumed representative for themore » future occurrence of submarine pipeline spans. Probabilistic models for the wave and current loading and its transfer to stresses in the pipe wall of a pipeline span is established together with a stochastic representation of the material resistance. The event of failure in ultimate loading is considered as based on a limit state which is reached when the maximum stress over the design life of the pipeline exceeds the yield strength of the pipe material. The yielding limit state is considered an ultimate limit state (ULS).« less
Moving Aerospace Structural Design Practice to a Load and Resistance Factor Approach
NASA Technical Reports Server (NTRS)
Larsen, Curtis E.; Raju, Ivatury S.
2016-01-01
Aerospace structures are traditionally designed using the factor of safety (FOS) approach. The limit load on the structure is determined and the structure is then designed for FOS times the limit load - the ultimate load. Probabilistic approaches utilize distributions for loads and strengths. Failures are predicted to occur in the region of intersection of the two distributions. The load and resistance factor design (LRFD) approach judiciously combines these two approaches by intensive calibration studies on loads and strength to result in structures that are efficient and reliable. This paper discusses these three approaches.
New insights into environmental enteric dysfunction
USDA-ARS?s Scientific Manuscript database
Environmental enteric dysfunction (EED) has been recognised as an important contributing factor to physical and cognitive stunting, poor response to oral vaccines, limited resilience to acute infections and ultimately global childhood mortality. The aetiology of EED remains poorly defined but the ep...
1989-05-01
also drawn up by Vereinigte Flugtech- nischen Werken as a technoeconomic analysis . The aerospace industry will be looking for the following...ultimate load without rupture. These conditions are verified by analysis and test. The limit load is the maximum load the vehicle is expected to see...the uncertainty factor (formerly known as the factor of safety) which accounts for variations in manufacture, defects not assumed in analysis but
Ultimate Limit State Assessment of Timber Bolt Connection Subjected to Double Unequal Shears
NASA Astrophysics Data System (ADS)
Musilek, Josef; Plachy, Jan
2017-10-01
Nowadays the problems occur when a structure engineer need to assess the ultimate limit state of timber bolt connection which is subjected to double unequal shears. This assessment of ultimate limit state shows the reliability of these connections. In assessing the reliability of this connection in ultimate limit state is a problem, because the formulas and equations that are currently available in design standards and available literature, describing only connections loaded symmetrically - this mean that they describe the timber bolt connection subjected to double equal shears. This fact causes problems because structural engineers have no available support, according to which they could assess reliability of the connection in terms of the ultimate limit state. They must therefore often report following an asymmetrically loaded connections carry about using formulas, which are primarily designed for checking connections loaded symmetrically. This leads logically to the fact that it is not respected by the actual behaviour of the connection in the ultimate limit state. Formulas derived in this paper provide the possibility to assess the ultimate limit state for such connection. The formulas derived in this article allow to carry out a reliability assessment of the ultimate limit state of timber bolt connection subjected to double shear. The using of the formulas derived in this paper leads to better description of the behaviour of this type of connection and also to the more economic design. An example of using these derived formulas is shown. There is shown in this example, how to assess the reliability of timber bolt connection subjected to double unequal shears in terms of ultimate limit states.
DOT National Transportation Integrated Search
2011-12-01
"Most foundation solutions for transportation structures rely on deep foundations, often on pile foundations : configured in a way most suitable to the problem at hand. Design of pile foundation solutions can best be pursued by clearly : defining lim...
Improving Assessment Tasks through Addressing Our Unconscious Limits to Change
ERIC Educational Resources Information Center
Joughin, Gordon; Dawson, Phillip; Boud, David
2017-01-01
Despite widespread recognition of the need to improve assessment in higher education, assessment tasks in individual courses are too often dominated by conventional methods. While changing assessment depends on many factors, improvements to assessment ultimately depend on the decisions and actions of individual educators. This paper considers…
Semiconductor Laser Low Frequency Noise Characterization
NASA Technical Reports Server (NTRS)
Maleki, Lute; Logan, Ronald T.
1996-01-01
This work summarizes the efforts in identifying the fundamental noise limit in semiconductor optical sources (lasers) to determine the source of 1/F noise and it's associated behavior. In addition, the study also addresses the effects of this 1/F noise on RF phased arrays. The study showed that the 1/F noise in semiconductor lasers has an ultimate physical limit based upon similar factors to fundamental noise generated in other semiconductor and solid state devices. The study also showed that both additive and multiplicative noise can be a significant detriment to the performance of RF phased arrays especially in regard to very low sidelobe performance and ultimate beam steering accuracy. The final result is that a noise power related term must be included in a complete analysis of the noise spectrum of any semiconductor device including semiconductor lasers.
On the Wrong Track: How Tracking Is Associated with Dropping out of High School
ERIC Educational Resources Information Center
Werblow, Jacob; Urick, Angela; Duesbery, Luke
2013-01-01
Academic tracking has been shown to limit the quality of student instructional opportunities, decrease students' perceptions of their abilities, and negatively influence student achievement. These factors associated with academic tracking also may influence students in lower tracks to learn less and ultimately to drop out of high school. Few…
Behavioral tradeoffs when dispersing across a patchy landscape.
Patrick A. Zollner; Steven L. Lima
2005-01-01
A better understanding of the behavior of dispersing animals will assist in determining the factors that limit their success and ultimately help improve the way dispersal is incorporated into population models. To that end, we used a simulation model to investigate three questions about behavioral tradeoffs that dispersing animals might face: (i) speed of movement...
Innovating aging: promises and pitfalls on the road to life extension
Vijg, Jan; de Grey, Aubrey D.N.J.
2014-01-01
One of the main benefits from the dramatic technological progress over the last two centuries is the enormous increase in human life expectancy, which has now reached record highs. After conquering most childhood diseases and a fair fraction of the diseases that plague adulthood, medical technology is now mainly pre-occupied by age-related disorders. Further progress is dependent on circumventing the traditional medical focus on individual diseases and instead targeting aging as a whole as the ultimate cause of the health problems that affect humankind at old age. In principle, a major effort to control the gradual accumulation of molecular and cellular damage – considered by many as the ultimate cause of intrinsic aging – may rapidly lead to interventions for regenerating aged and worn-out tissues and organs. While considered impossible by many, there really is no reason to reject this as scientifically implausible. However, as we discuss, it is not only scientific progress that is currently a limiting factor, but societal factors that hinder and may ultimately prevent further progress in testing and adopting the many possible interventions to cure aging. PMID:24732067
Thermodynamic limits of energy harvesting from outgoing thermal radiation.
Buddhiraju, Siddharth; Santhanam, Parthiban; Fan, Shanhui
2018-04-17
We derive the thermodynamic limits of harvesting power from the outgoing thermal radiation from the ambient to the cold outer space. The derivations are based on a duality relation between thermal engines that harvest solar radiation and those that harvest outgoing thermal radiation. In particular, we derive the ultimate limit for harvesting outgoing thermal radiation, which is analogous to the Landsberg limit for solar energy harvesting, and show that the ultimate limit far exceeds what was previously thought to be possible. As an extension of our work, we also derive the ultimate limit of efficiency of thermophotovoltaic systems.
Cancer and liver cirrhosis: implications on prognosis and management
Pinter, Matthias; Trauner, Michael; Peck-Radosavljevic, Markus; Sieghart, Wolfgang
2016-01-01
Liver cirrhosis, the end-stage of every chronic liver disease, is not only the major risk factor for the development of hepatocellular carcinoma but also a limiting factor for anticancer therapy of liver and non-hepatic malignancies. Liver cirrhosis may limit surgical and interventional approaches to cancer treatment, influence pharmacokinetics of anticancer drugs, increase side effects of chemotherapy, render patients susceptible for hepatotoxicity, and ultimately result in a competitive risk for morbidity and mortality. In this review, we provide a concise overview about the impact of liver cirrhosis on the management and prognosis of patients with primary liver cancer or non-hepatic malignancies. PMID:27843598
Parametric nanomechanical amplification at very high frequency.
Karabalin, R B; Feng, X L; Roukes, M L
2009-09-01
Parametric resonance and amplification are important in both fundamental physics and technological applications. Here we report very high frequency (VHF) parametric resonators and mechanical-domain amplifiers based on nanoelectromechanical systems (NEMS). Compound mechanical nanostructures patterned by multilayer, top-down nanofabrication are read out by a novel scheme that parametrically modulates longitudinal stress in doubly clamped beam NEMS resonators. Parametric pumping and signal amplification are demonstrated for VHF resonators up to approximately 130 MHz and provide useful enhancement of both resonance signal amplitude and quality factor. We find that Joule heating and reduced thermal conductance in these nanostructures ultimately impose an upper limit to device performance. We develop a theoretical model to account for both the parametric response and nonequilibrium thermal transport in these composite nanostructures. The results closely conform to our experimental observations, elucidate the frequency and threshold-voltage scaling in parametric VHF NEMS resonators and sensors, and establish the ultimate sensitivity limits of this approach.
Endoscopic mucosal resection of colonic lesions: current applications and future prospects.
Poppers, David M; Haber, Gregory B
2008-05-01
The introduction of submucosal fluid injection has remarkably extended the range of endoscopically resectable polyps. The limiting factor for endoscopic resection is not polyp size, but polyp depth. Endoscopic ultrasound is a useful adjunctive diagnostic tool to assess the depth of invasion. The success of are section ultimately depends on pathologic confirmation of a benign nature of this lesion or of a cancer limited to the mucosa. Selected well-differentiated cancers without lymphovascular invasion of the superficial submucosa can be successfully resected endoscopically.
Material limitations on the detection limit in refractometry.
Skafte-Pedersen, Peder; Nunes, Pedro S; Xiao, Sanshui; Mortensen, Niels Asger
2009-01-01
We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η, with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and filling fractions into account, the detection limit declines. As an example we discuss the fundamental limits of silicon-based high-Q resonators, such as photonic crystal resonators, for sensing in a bio-liquid environment, such as a water buffer. In the transparency window (λ ≳ 1100 nm) of silicon the detection limit becomes almost independent on the filling fraction, while in the visible, the detection limit depends strongly on the filling fraction because the silicon absorbs strongly.
Yang, Yuanmu; Kravchenko, Ivan I.; Briggs, Dayrl P.; ...
2014-12-16
Fano-resonant plasmonic metamaterials and nanostructures have become a major focus of the nanophotonics fields over the past several years due their ability to produce high quality factor (Q-factor) resonances. The origin of such resonances is the interference between a broad and narrow resonance, ultimately allowing suppression of radiative damping. However, Fano-resonant plasmonic structures still suffer non-radiative damping due to Ohmic loss, ultimately limiting the achievable Q-factors to values less than ~10. Here, we report experimental demonstration of Fano-resonant silicon-based metamaterials that have a response that mimics the electromagnetically induced transparency (EIT) found in atomic systems. Due to extremely low absorptionmore » loss, a record-high quality factor (Q-factor) of 306 was experimentally observed. Furthermore, the unit cell of the metamaterial was designed with a feed-gap which results in strong local field enhancement in the surrounding medium resulting in strong light-matter interaction. This allows the metamaterial to serve as a refractive index sensor with a figure-of-merit (FOM) of 101, far exceeding the performance of previously demonstrated localized surface plasmon resonance sensors.« less
The eye limits the brain's learning potential
Zhou, Jiawei; Zhang, Yudong; Dai, Yun; Zhao, Haoxin; Liu, Rong; Hou, Fang; Liang, Bo; Hess, Robert F.; Zhou, Yifeng
2012-01-01
The concept of a critical period for visual development early in life during which sensory experience is essential to normal neural development is now well established. However recent evidence suggests that a limited degree of plasticity remains after this period and well into adulthood. Here, we ask the question, "what limits the degree of plasticity in adulthood?" Although this limit has been assumed to be due to neural factors, we show that the optical quality of the retinal image ultimately limits the brain potential for change. We correct the high-order aberrations (HOAs) normally present in the eye's optics using adaptive optics, and reveal a greater degree of neuronal plasticity than previously appreciated. PMID:22509464
Plate and butt-weld stresses beyond elastic limit, material and structural modeling
NASA Technical Reports Server (NTRS)
Verderaime, V.
1991-01-01
Ultimate safety factors of high performance structures depend on stress behavior beyond the elastic limit, a region not too well understood. An analytical modeling approach was developed to gain fundamental insights into inelastic responses of simple structural elements. Nonlinear material properties were expressed in engineering stresses and strains variables and combined with strength of material stress and strain equations similar to numerical piece-wise linear method. Integrations are continuous which allows for more detailed solutions. Included with interesting results are the classical combined axial tension and bending load model and the strain gauge conversion to stress beyond the elastic limit. Material discontinuity stress factors in butt-welds were derived. This is a working-type document with analytical methods and results applicable to all industries of high reliability structures.
Addition of multiple limiting resources reduces grassland diversity.
Harpole, W Stanley; Sullivan, Lauren L; Lind, Eric M; Firn, Jennifer; Adler, Peter B; Borer, Elizabeth T; Chase, Jonathan; Fay, Philip A; Hautier, Yann; Hillebrand, Helmut; MacDougall, Andrew S; Seabloom, Eric W; Williams, Ryan; Bakker, Jonathan D; Cadotte, Marc W; Chaneton, Enrique J; Chu, Chengjin; Cleland, Elsa E; D'Antonio, Carla; Davies, Kendi F; Gruner, Daniel S; Hagenah, Nicole; Kirkman, Kevin; Knops, Johannes M H; La Pierre, Kimberly J; McCulley, Rebecca L; Moore, Joslin L; Morgan, John W; Prober, Suzanne M; Risch, Anita C; Schuetz, Martin; Stevens, Carly J; Wragg, Peter D
2016-09-01
Niche dimensionality provides a general theoretical explanation for biodiversity-more niches, defined by more limiting factors, allow for more ways that species can coexist. Because plant species compete for the same set of limiting resources, theory predicts that addition of a limiting resource eliminates potential trade-offs, reducing the number of species that can coexist. Multiple nutrient limitation of plant production is common and therefore fertilization may reduce diversity by reducing the number or dimensionality of belowground limiting factors. At the same time, nutrient addition, by increasing biomass, should ultimately shift competition from belowground nutrients towards a one-dimensional competitive trade-off for light. Here we show that plant species diversity decreased when a greater number of limiting nutrients were added across 45 grassland sites from a multi-continent experimental network. The number of added nutrients predicted diversity loss, even after controlling for effects of plant biomass, and even where biomass production was not nutrient-limited. We found that elevated resource supply reduced niche dimensionality and diversity and increased both productivity and compositional turnover. Our results point to the importance of understanding dimensionality in ecological systems that are undergoing diversity loss in response to multiple global change factors.
Material Limitations on the Detection Limit in Refractometry
Skafte-Pedersen, Peder; Nunes, Pedro S.; Xiao, Sanshui; Mortensen, Niels Asger
2009-01-01
We discuss the detection limit for refractometric sensors relying on high-Q optical cavities and show that the ultimate classical detection limit is given by min {Δn} ≳ η, with n + iη being the complex refractive index of the material under refractometric investigation. Taking finite Q factors and filling fractions into account, the detection limit declines. As an example we discuss the fundamental limits of silicon-based high-Q resonators, such as photonic crystal resonators, for sensing in a bio-liquid environment, such as a water buffer. In the transparency window (λ ≳ 1100 nm) of silicon the detection limit becomes almost independent on the filling fraction, while in the visible, the detection limit depends strongly on the filling fraction because the silicon absorbs strongly. PMID:22291513
Structural design/margin assessment
NASA Technical Reports Server (NTRS)
Ryan, R. S.
1993-01-01
Determining structural design inputs and the structural margins following design completion is one of the major activities in space exploration. The end result is a statement of these margins as stability, safety factors on ultimate and yield stresses, fracture limits (fracture control), fatigue lifetime, reuse criteria, operational criteria and procedures, stability factors, deflections, clearance, handling criteria, etc. The process is normally called a load cycle and is time consuming, very complex, and involves much more than structures. The key to successful structural design is the proper implementation of the process. It depends on many factors: leadership and management of the process, adequate analysis and testing tools, data basing, communications, people skills, and training. This process and the various factors involved are discussed.
Autophagy: not good OR bad, but good AND bad.
Altman, Brian J; Rathmell, Jeffrey C
2009-05-01
Autophagy is a well-established mechanism to degrade intracellular components and provide a nutrient source to promote survival of cells in metabolic distress. Such stress can be caused by a lack of available nutrients or by insufficient rates of nutrient uptake. Indeed, growth factor deprivation leads to internalization and degradation of nutrient transporters, leaving cells with limited means to access extracellular nutrients even when plentiful.This loss of growth factor signaling and extracellular nutrients ultimately leads to apoptosis, but also activates autophagy, which may degrade intracellular components and provide fuel for mitochondrial bioenergetics. The precise metabolic role of autophagy and how it intersects with the apoptotic pathways in growth factor withdrawal, however, has been uncertain. Our recent findings ingrowth factor-deprived hematopoietic cells show that autophagy can simultaneously contribute to cell metabolism and initiate a pathway to sensitize cells to apoptotic death. This pathway may promote tissue homeostasis by ensuring that only cells with high resistance to apoptosis may utilize autophagy as a survival mechanism when growth factors are limiting and nutrient uptake decreases.
NASA Technical Reports Server (NTRS)
Bukley, Angie; Paloski, William; Clement, Gilles
2006-01-01
This chapter discusses potential technologies for achieving artificial gravity in a space vehicle. We begin with a series of definitions and a general description of the rotational dynamics behind the forces ultimately exerted on the human body during centrifugation, such as gravity level, gravity gradient, and Coriolis force. Human factors considerations and comfort limits associated with a rotating environment are then discussed. Finally, engineering options for designing space vehicles with artificial gravity are presented.
Performance limits for exo-clutter Ground Moving Target Indicator (GMTI) radar.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Doerry, Armin Walter
2010-09-01
The performance of a Ground Moving Target Indicator (GMTI) radar system depends on a variety of factors, many which are interdependent in some manner. It is often difficult to 'get your arms around' the problem of ascertaining achievable performance limits, and yet those limits exist and are dictated by physics. This report identifies and explores those limits, and how they depend on hardware system parameters and environmental conditions. Ultimately, this leads to a characterization of parameters that offer optimum performance for the overall GMTI radar system. While the information herein is not new to the literature, its collection into amore » single report hopes to offer some value in reducing the 'seek time'.« less
Niche filling slows the diversification of Himalayan songbirds.
Price, Trevor D; Hooper, Daniel M; Buchanan, Caitlyn D; Johansson, Ulf S; Tietze, D Thomas; Alström, Per; Olsson, Urban; Ghosh-Harihar, Mousumi; Ishtiaq, Farah; Gupta, Sandeep K; Martens, Jochen; Harr, Bettina; Singh, Pratap; Mohan, Dhananjai
2014-05-08
Speciation generally involves a three-step process--range expansion, range fragmentation and the development of reproductive isolation between spatially separated populations. Speciation relies on cycling through these three steps and each may limit the rate at which new species form. We estimate phylogenetic relationships among all Himalayan songbirds to ask whether the development of reproductive isolation and ecological competition, both factors that limit range expansions, set an ultimate limit on speciation. Based on a phylogeny for all 358 species distributed along the eastern elevational gradient, here we show that body size and shape differences evolved early in the radiation, with the elevational band occupied by a species evolving later. These results are consistent with competition for niche space limiting species accumulation. Even the elevation dimension seems to be approaching ecological saturation, because the closest relatives both inside the assemblage and elsewhere in the Himalayas are on average separated by more than five million years, which is longer than it generally takes for reproductive isolation to be completed; also, elevational distributions are well explained by resource availability, notably the abundance of arthropods, and not by differences in diversification rates in different elevational zones. Our results imply that speciation rate is ultimately set by niche filling (that is, ecological competition for resources), rather than by the rate of acquisition of reproductive isolation.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Checchin, Mattia
Superconducting niobium accelerating cavities are devices operating in radio-frequency and able to accelerate charged particles up to energy of tera-electron-volts. Such accelerating structures are though limited in terms of quality factor and accelerating gradient, that translates--in some cases--in higher capital costs of construction and operation of superconducting rf accelerators. Looking forward for a new generation of more affordable accelerators, the physical description of limiting mechanisms in superconducting microwave resonators is discussed. In particular, the physics behind the dissipation introduced by vortices in the superconductor, the ultimate quench limitations and the quality factor degradation mechanism after a quench are described inmore » detail. One of the limiting factor of the quality factor is the dissipation introduced by trapped magnetic flux vortices. The radio-frequency complex response of trapped vortices in superconductors is derived by solving the motion equation for a magnetic flux line, assuming a bi-dimensional and mean free path-dependent Lorentzian-shaped pinning potential. The resulting surface resistance shows the bell-shaped trend as a function of the mean free path, in agreement with the experimental data observed. Such bell-shaped trend of the surface resistance is described in terms of the interplay of the two limiting regimes identified as pinning and flux flow regimes, for low and large mean free path values respectively. The model predicts that the dissipation regime--pinning- or flux-flow-dominated--can be tuned either by acting on the frequency or on the electron mean free path value. The effect of different configurations of pinning sites and strength on the vortex surface resistance are also discussed. Accelerating cavities are also limited by the quench of the superconductive state, which limits the maximum accelerating gradient achievable. The accelerating field limiting factor is usually associate d to the superheating field, which is intimately correlated to the penetration of magnetic flux vortices in the material. Experimental data for N-doped cavities suggest that uniform Ginzburg-Landau parameter cavities are statistically limited by the lower critical field, in terms of accelerating gradient. By introducing a Ginzburg-Landau parameter profile at the cavity rf surface--dirty layer--the accelerating gradient of superconducting resonators can be enhanced. The description of the physics behind the accelerating gradient enhancement as a consequence of the dirty layer is carried out by solving numerically the Ginzburg-Landau equations for the layered system. The enhancement is showed to be promoted by the higher energy barrier to vortex penetration, and by the enhanced lower critical field. Another serious threat to the quality factor during the cavity operation is the extra dissipation introduced by the quench. Such quality factor degradation mechanism due to the quench, is generated by the trapping of external magnetic flux at quench spot. The purely extrinsic origin of such extra dissipation is proven by the impossibility of decrease the quality factor by quenching in a magnetic field-free environment. Also, a clear relation of the dissipation introduced by quenching to the orientation of the applied magnetic field is observed. The full recover of the quality factor by re-quenching in compensated field is possible when the trapped flux at the quench spot is modest. On the contrary, when the trapped magnetic flux is too large, the quality factor degradation may become irreversible by this technique, likely due to the outward flux migration beyond the normal zone opening during the quench.« less
NASA Astrophysics Data System (ADS)
Checchin, Mattia
Superconducting niobium accelerating cavities are devices operating in radiofrequency and able to accelerate charged particles up to energy of tera-electron-volts. Such accelerating structures are though limited in terms of quality factor and accelerating gradient, that translates--in some cases--in higher capital costs of construction and operation of superconducting rf accelerators. Looking forward for a new generation of more affordable accelerators, the physical description of limiting mechanisms in superconducting microwave resonators is discussed. In particular, the physics behind the dissipation introduced by vortices in the superconductor, the ultimate quench limitations and the quality factor degradation mechanism after a quench are described in detail. One of the limiting factor of the quality factor is the dissipation introduced by trapped magnetic flux vortices. The radio-frequency complex response of trapped vortices in superconductors is derived by solving the motion equation for a magnetic flux line, assuming a bi-dimensional and mean free path-dependent Lorentzian-shaped pinning potential. The resulting surface resistance shows the bell-shaped trend as a function of the mean free path, in agreement with the experimental data observed. Such bell-shaped trend of the surface resistance is described in terms of the interplay of the two limiting regimes identified as pinning and flux flow regimes, for low and large mean free path values respectively. The model predicts that the dissipation regime--pinning- or flux-flow-dominated--can be tuned either by acting on the frequency or on the electron mean free path value. The effect of different configurations of pinning sites and strength on the vortex surface resistance are also discussed. Accelerating cavities are also limited by the quench of the superconductive state, which limits the maximum accelerating gradient achievable. The accelerating field limiting factor is usually associated to the superheating field, which is intimately correlated to the penetration of magnetic flux vortices in the material. Experimental data for N-doped cavities suggest that uniform Ginzburg-Landau parameter cavities are statistically limited by the lower critical field, in terms of accelerating gradient. By introducing a Ginzburg-Landau parameter profile at the cavity rf surface--dirty layer--the accelerating gradient of superconducting resonators can be enhanced. The description of the physics behind the accelerating gradient enhancement as a consequence of the dirty layer is carried out by solving numerically the Ginzburg-Landau equations for the layered system. The enhancement is showed to be promoted by the higher energy barrier to vortex penetration, and by the enhanced lower critical field. Another serious threat to the quality factor during the cavity operation is the extra dissipation introduced by the quench. Such quality factor degradation mechanism due to the quench, is generated by the trapping of external magnetic flux at the quench spot. The purely extrinsic origin of such extra dissipation is proven by the impossibility of decrease the quality factor by quenching in a magnetic field-free environment. Also, a clear relation of the dissipation introduced by quenching to the orientation of the applied magnetic field is observed. The full recover of the quality factor by re-quenching in compensated field is possible when the trapped flux at the quench spot is modest. On the contrary, when the trapped magnetic flux is too large, the quality factor degradation may become irreversible by this technique, likely due to the outward flux migration beyond the normal zone opening during the quench.
Environmental applications of single collector high resolution ICP-MS.
Krachler, Michael
2007-08-01
The number of environmental applications of single collector high resolution ICP-MS (HR-ICP-MS) has increased rapidly in recent years. There are many factors that contribute to make HR-ICP-MS a very powerful tool in environmental analysis. They include the extremely low detection limits achievable, tremendously high sensitivity, the ability to separate ICP-MS signals of the analyte from spectral interferences, enabling the reliable determination of many trace elements, and the reasonable precision of isotope ratio measurements. These assets are improved even further using high efficiency sample introduction systems. Therefore, external factors such as the stability of laboratory blanks are frequently the limiting factor in HR-ICP-MS analysis rather than the detection power. This review aims to highlight the most recent applications of HR-ICP-MS in this sector, focusing on matrices and applications where the superior capabilities of the instrumental technique are most useful and often ultimately required.
Lee, Robert Mkw; Dickhout, Jeffrey G; Sandow, Shaun L
2017-04-01
Essential hypertension is a complex multifactorial disease process that involves the interaction of multiple genes at various loci throughout the genome, and the influence of environmental factors such as diet and lifestyle, to ultimately determine long-term arterial pressure. These factors converge with physiological signaling pathways to regulate the set-point of long-term blood pressure. In hypertension, structural changes in arteries occur and show differences within and between vascular beds, between species, models and sexes. Such changes can also reflect the development of hypertension, and the levels of circulating humoral and vasoactive compounds. The role of perivascular adipose tissue in the modulation of vascular structure under various disease states such as hypertension, obesity and metabolic syndrome is an emerging area of research, and is likely to contribute to the heterogeneity described in this review. Diversity in structure and related function is the norm, with morphological changes being causative in some beds and states, and in others, a consequence of hypertension. Specific animal models of hypertension have advantages and limitations, each with factors influencing the relevance of the model to the human hypertensive state/s. However, understanding the fundamental properties of artery function and how these relate to signalling mechanisms in real (intact) tissues is key for translating isolated cell and model data to have an impact and relevance in human disease etiology. Indeed, the ultimate aim of developing new treatments to correct vascular dysfunction requires understanding and recognition of the limitations of the methodologies used.
14 CFR 25.305 - Strength and deformation.
Code of Federal Regulations, 2013 CFR
2013-01-01
... strength is shown by dynamic tests simulating actual load conditions, the 3-second limit does not apply. Static tests conducted to ultimate load must include the ultimate deflections and ultimate deformation....305 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT...
14 CFR 25.305 - Strength and deformation.
Code of Federal Regulations, 2012 CFR
2012-01-01
... strength is shown by dynamic tests simulating actual load conditions, the 3-second limit does not apply. Static tests conducted to ultimate load must include the ultimate deflections and ultimate deformation....305 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT...
14 CFR 25.305 - Strength and deformation.
Code of Federal Regulations, 2014 CFR
2014-01-01
... strength is shown by dynamic tests simulating actual load conditions, the 3-second limit does not apply. Static tests conducted to ultimate load must include the ultimate deflections and ultimate deformation....305 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT...
14 CFR 25.305 - Strength and deformation.
Code of Federal Regulations, 2010 CFR
2010-01-01
... strength is shown by dynamic tests simulating actual load conditions, the 3-second limit does not apply. Static tests conducted to ultimate load must include the ultimate deflections and ultimate deformation....305 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT...
14 CFR 25.305 - Strength and deformation.
Code of Federal Regulations, 2011 CFR
2011-01-01
... strength is shown by dynamic tests simulating actual load conditions, the 3-second limit does not apply. Static tests conducted to ultimate load must include the ultimate deflections and ultimate deformation....305 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT...
Intra-Beam Scattering, Impedance, and Instabilities in Ultimate Storage Rings
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bane, Karl; /SLAC
We have investigated collective effects in an ultimate storage ring, i.e. one with diffraction limited emittances in both planes, using PEP-X as an example. In an ultimate ring intra-beam scattering (IBS) sets the limit of current that can be stored. In PEP-X, a 4.5 GeV ring running round beams at 200 mA in 3300 bunches, IBS doubles the emittances to 11.5 pm at the design current. The Touschek lifetime is 11 hours. Impedance driven collective effects tend not to be important since the beam current is relatively low. We have investigated collective effects in PEP-X, an ultimate storage ring, i.e.more » one with diffraction limited emittances (at one angstrom wavelength) in both planes. In an ultimate ring intra-beam scattering (IBS) sets the limit of current that can be stored. In PEP-X, IBS doubles the emittances to 11.5 pm at the design current of 200 mA, assuming round beams. The Touschek lifetime is quite large in PEP-X, 11.6 hours, and - near the operating point - increases with decreasing emittance. It is, however, a very sensitive function of momentum acceptance. In an ultimate ring like PEP-X impedance driven collective effects tend not to be important since the beam current is relatively low. Before ultimate PEP-X can be realized, the question of how to run a machine with round beams needs serious study. For example, in this report we assumed that the vertical emittance is coupling dominated. It may turn out that using vertical dispersion is a preferable way to generate round beams. The choice will affect IBS and the Touschek effect.« less
Performance limits for maritime Inverse Synthetic Aperture Radar (ISAR)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Doerry, Armin Walter
2013-11-01
The performance of an Inverse Synthetic Aperture Radar (ISAR) system depends on a variety of factors, many which are interdependent in some manner. In this report we specifically examine ISAR as applied to maritime targets (e.g. ships). It is often difficult to get your arms around the problem of ascertaining achievable performance limits, and yet those limits exist and are dictated by physics. This report identifies and explores those limits, and how they depend on hardware system parameters and environmental conditions. Ultimately, this leads to a characterization of parameters that offer optimum performance for the overall ISAR system. While themore » information herein is not new to the literature, its collection into a single report hopes to offer some value in reducing the seek time.« less
Ultimate pier and contraction scour prediction in cohesive soils at selected bridges in Illinois
Straub, Timothy D.; Over, Thomas M.; Domanski, Marian M.
2013-01-01
The Scour Rate In COhesive Soils-Erosion Function Apparatus (SRICOS-EFA) method includes an ultimate scour prediction that is the equilibrium maximum pier and contraction scour of cohesive soils over time. The purpose of this report is to present the results of testing the ultimate pier and contraction scour methods for cohesive soils on 30 bridge sites in Illinois. Comparison of the ultimate cohesive and noncohesive methods, along with the Illinois Department of Transportation (IDOT) cohesive soil reduction-factor method and measured scour are presented. Also, results of the comparison of historic IDOT laboratory and field values of unconfined compressive strength of soils (Qu) are presented. The unconfined compressive strength is used in both ultimate cohesive and reduction-factor methods, and knowing how the values from field methods compare to the laboratory methods is critical to the informed application of the methods. On average, the non-cohesive method results predict the highest amount of scour, followed by the reduction-factor method results; and the ultimate cohesive method results predict the lowest amount of scour. The 100-year scour predicted for the ultimate cohesive, noncohesive, and reduction-factor methods for each bridge site and soil are always larger than observed scour in this study, except 12% of predicted values that are all within 0.4 ft of the observed scour. The ultimate cohesive scour prediction is smaller than the non-cohesive scour prediction method for 78% of bridge sites and soils. Seventy-six percent of the ultimate cohesive predictions show a 45% or greater reduction from the non-cohesive predictions that are over 10 ft. Comparing the ultimate cohesive and reduction-factor 100-year scour predictions methods for each bridge site and soil, the scour predicted by the ultimate cohesive scour prediction method is less than the reduction-factor 100-year scour prediction method for 51% of bridge sites and soils. Critical shear stress remains a needed parameter in the ultimate scour prediction for cohesive soils. The unconfined soil compressive strength measured by IDOT in the laboratory was found to provide a good prediction of critical shear stress, as measured by using the erosion function apparatus in a previous study. Because laboratory Qu analyses are time-consuming and expensive, the ability of field-measured Rimac data to estimate unconfined soil strength in the critical shear–soil strength relation was tested. A regression analysis was completed using a historic IDOT dataset containing 366 data pairs of laboratory Qu and field Rimac measurements from common sites with cohesive soils. The resulting equations provide a point prediction of Qu, given any Rimac value with the 90% confidence interval. The prediction equations are not significantly different from the identity Qu = Rimac. The alternative predictions of ultimate cohesive scour presented in this study assume Qu will be estimated using Rimac measurements that include computed uncertainty. In particular, the ultimate cohesive predicted scour is greater than observed scour for the entire 90% confidence interval range for predicting Qu at the bridges and soils used in this study, with the exception of the six predicted values that are all within 0.6 ft of the observed scour.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Duffey, R.B.; Rohatgi, U.S.
Maximum power limits for hypothetical designs of natural circulation plants can be described analytically. The thermal hydraulic design parameters are those which limit the flow, being the elevations, flow areas, and loss coefficients. WE have found some simple ``design`` equations for natural circulation flow to power ratio, and for the stability limit. The analysis of historical and available data for maximum capacity factor estimation shows 80% to be reasonable and achievable. The least cost is obtained by optimizing both hypothetical plant performance for a given output,a nd the plant layout and design. There is also scope to increase output andmore » reduce cost by considering design variations of primary and secondary pressure, and by optimizing component elevations and loss coefficients. The design limits for each are set by stability and maximum flow considerations, which deserve close and careful evaluation.« less
Model invariance across genders of the Broad Autism Phenotype Questionnaire.
Broderick, Neill; Wade, Jordan L; Meyer, J Patrick; Hull, Michael; Reeve, Ronald E
2015-10-01
ASD is one of the most heritable neuropsychiatric disorders, though comprehensive genetic liability remains elusive. To facilitate genetic research, researchers employ the concept of the broad autism phenotype (BAP), a milder presentation of traits in undiagnosed relatives. Research suggests that the BAP Questionnaire (BAPQ) demonstrates psychometric properties superior to other self-report measures. To examine evidence regarding validity of the BAPQ, the current study used confirmatory factor analysis to test the assumption of model invariance across genders. Results of the current study upheld model invariance at each level of parameter constraint; however, model fit indices suggested limited goodness-of-fit between the proposed model and the sample. Exploratory analyses investigated alternate factor structure models but ultimately supported the proposed three-factor structure model.
Exploring community health through the Sustainable Livelihoods framework.
Barnidge, Ellen K; Baker, Elizabeth A; Motton, Freda; Fitzgerald, Teresa; Rose, Frank
2011-02-01
Health disparities are a major concern in the United States. Research suggests that inequitable distribution of money, power, and resources shape the circumstances for daily life and create and exacerbate health disparities. In rural communities, inequitable distribution of these structural factors seems to limit employment opportunities. The Sustainable Livelihoods framework, an economic development model, provides a conceptual framework to understand how distribution of these social, economic, and political structural factors affect employment opportunities and community health in rural America. This study uses photo-elicitation interviews, a qualitative, participatory method, to understand community members' perceptions of how distribution of structural factors through creation and maintenance of institutional practices and policies influence employment opportunities and, ultimately, community health for African Americans living in rural Missouri.
Tumors of the skin and soft tissues
DOE Office of Scientific and Technical Information (OSTI.GOV)
Weller, R.E.
1991-10-01
The majority of the body surface is covered by the skin. Many internal disorders are reflected in the condition of the skin. One of the major functions of the skin is protection of the other organ systems from a variety of environmental insults. In this role, the skin itself is exposed to factors that can ultimately cause chronic diseases and cancer. Since it is relatively easy to recognize skin abnormalities, most skin cancers are brought to professional attention sooner than other types of cancer. However, due to the close resemblance between many skin neoplasms and noncancerous dermatologic disorders, these neoplasmsmore » may be mistreated for months or even years. In veterinary oncology, as in human medicine, most cancers can be effectively treated or cured following an accurate diagnosis. Once diagnosed, skin neoplasms should be aggressively treated. If causal factors are known, exposure to these factors should be limited through removal of the agent (for chemical carcinogens) or limiting exposure to the agent (for other carcinogens such as sunlight). 10 tabs. (MHB)« less
Oak Ridge Flywheel Evaluation Laboratory test report on the Garrett AiResearch flywheel
NASA Astrophysics Data System (ADS)
Steele, R. S., Jr.; Babelay, E. F.
1981-02-01
The graphite-epoxy-composite spokes began to splinter in four tip locations after the sixth balance run to 200 Hz (12,000 rpm). Testing was continued until a catastrophic failure was achieved. The spoke splintering did not appear to be a factor in the ultimate capability. Maximum stored energy was 1.16 kWh (4.17 MJ) at 74.6 Wh/kg (269 kJ/kg) at 463 rps (27,780 rpm). Ultimate speed was limited by a dynamic instability at 463 rps. Actual failure occurred in a braking mode at 390 rps. Other observations of dynamic behavior included the mass eccentricity shifting repeatably with speed at a rate of 0.051 mm in 170 Hz; this action was attributed to nonuniform flexing of the rim. A permanent balance shift of approximately 0.051 mm occurred, possibly indicating a slippage of the rim relative to the hub. Radiography shows that the rims realigned themselves.
Code development for ships -- A demonstration
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ayyub, B.; Mansour, A.E.; White, G.
1996-12-31
A demonstration summary of a reliability-based structural design code for ships is presented for two ship types, a cruiser and a tanker. For both ship types, code requirements cover four failure modes: hull girder bulking, unstiffened plate yielding and buckling, stiffened plate buckling, and fatigue of critical detail. Both serviceability and ultimate limit states are considered. Because of limitation on the length, only hull girder modes are presented in this paper. Code requirements for other modes will be presented in future publication. A specific provision of the code will be a safety check expression. The design variables are to bemore » taken at their nominal values, typically values in the safe side of the respective distributions. Other safety check expressions for hull girder failure that include load combination factors, as well as consequence of failure factors, are considered. This paper provides a summary of safety check expressions for the hull girder modes.« less
Control of mechanically activated polymersome fusion: Factors affecting fusion
Henderson, Ian M.; Paxton, Walter F.
2014-12-15
Previously we have studied the mechanically-activated fusion of extruded (200 nm) polymer vesicles into giant polymersomes using agitation in the presence of salt. In this study we have investigated several factors contributing to this phenomenon, including the effects of (i) polymer vesicle concentration, (ii) agitation speed and duration, and iii) variation of the salt and its concentration. It was found that increasing the concentration of the polymer dramatically increases the production of giant vesicles through the increased collisions of polymersomes. Our investigations also found that increasing the frequency of agitation increased the efficiency of fusion, though ultimately limited the sizemore » of vesicle which could be produced due to the high shear involved. Finally it was determined that salt-mediation of the fusion process was not limited to NaCl, but is instead a general effect facilitated by the presence of solvated ionic compounds, albeit with different salts initiating fusion at different concentration.« less
Recent advances and developments in composite dental restorative materials.
Cramer, N B; Stansbury, J W; Bowman, C N
2011-04-01
Composite dental restorations represent a unique class of biomaterials with severe restrictions on biocompatibility, curing behavior, esthetics, and ultimate material properties. These materials are presently limited by shrinkage and polymerization-induced shrinkage stress, limited toughness, the presence of unreacted monomer that remains following the polymerization, and several other factors. Fortunately, these materials have been the focus of a great deal of research in recent years with the goal of improving restoration performance by changing the initiation system, monomers, and fillers and their coupling agents, and by developing novel polymerization strategies. Here, we review the general characteristics of the polymerization reaction and recent approaches that have been taken to improve composite restorative performance.
Recent Advances and Developments in Composite Dental Restorative Materials
Cramer, N.B.; Stansbury, J.W.; Bowman, C.N.
2011-01-01
Composite dental restorations represent a unique class of biomaterials with severe restrictions on biocompatibility, curing behavior, esthetics, and ultimate material properties. These materials are presently limited by shrinkage and polymerization-induced shrinkage stress, limited toughness, the presence of unreacted monomer that remains following the polymerization, and several other factors. Fortunately, these materials have been the focus of a great deal of research in recent years with the goal of improving restoration performance by changing the initiation system, monomers, and fillers and their coupling agents, and by developing novel polymerization strategies. Here, we review the general characteristics of the polymerization reaction and recent approaches that have been taken to improve composite restorative performance. PMID:20924063
Stepp, Stephanie D.; Lazarus, Sophie A.; Byrd, Amy L.
2016-01-01
There is an urgent need to identify signs that harbinger onset of borderline personality disorder (BPD). Advancement in this area is required to refine developmental theories, discover etiological mechanisms, improve early detection, and achieve our ultimate goal of prevention. Though many studies have supported a wide range of factors that increase subsequent risk for BPD, this literature has yet to be critically evaluated, and there are no comprehensive reviews that examine and integrate these findings. To address this limitation, we conducted a systematic review to summarize and synthesize the current literature. Electronic databases were systematically searched for prospective, longitudinal studies that examined risk factors of subsequent BPD outcomes (features, symptoms, diagnosis) resulting in a total of 39 studies, reflecting 24 unique samples. Though increased risk for BPD was reliably attributed to multiple factors within social, family, maltreatment, and child domains, the most striking limitation of this research is its lack of disorder-specific findings Additional limitations, including notable heterogeneity in sampling methodology, symptom assessment methodology, and developmental timing of assessments, are discussed in terms of how close are we to pinpointing who is most at risk and why in an attempt to provide a roadmap for future research. PMID:27709988
Stepp, Stephanie D; Lazarus, Sophie A; Byrd, Amy L
2016-10-01
There is an urgent need to identify signs that harbinger onset of borderline personality disorder (BPD). Advancement in this area is required to refine developmental theories, discover etiological mechanisms, improve early detection, and achieve our ultimate goal of prevention. Though many studies have supported a wide range of factors that increase subsequent risk for BPD, this literature has yet to be critically evaluated, and there are no comprehensive reviews that examine and integrate these findings. To address this limitation, we conducted a systematic review to summarize and synthesize the current literature. Electronic databases were systematically searched for prospective, longitudinal studies that examined risk factors of subsequent BPD outcomes (features, symptoms, diagnosis), resulting in a total of 39 studies, reflecting 24 unique samples. Though increased risk for BPD was reliably attributed to multiple factors within social, family, maltreatment, and child domains, the most striking limitation of this research is its lack of disorder-specific findings. Additional limitations, including notable heterogeneity in sampling methodology, symptom assessment methodology, and developmental timing of assessments, are discussed in terms of how close we are to pinpointing who is most at risk and why in an attempt to provide a roadmap for future research. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
The impact of population growth on environment: the debate heats up.
Shaw, R P
1992-02-01
A proposed framework, which was introduced at the 1989 meetings of the American Association for the Advancement of Science, included political constraints as well as population growth as a proximate cause with potentially important impacts on the environment in Paul and Ann Ehrlich's well-known PAT equation. PAT limitations are identified as the 1.2 billion people caught in the debt-poverty trap, less developed countries' balance of payments deficits, and "distortionary factors" that undermined economic incentives and contributed to mismanagement of resources. Such factors could be keeping farm prices low and have an impact on deterring use of environmentally sound traditional agricultural practices. Mismanagement of public lands occurs when large commercial enterprises or large scale mechanization displace population onto marginal or less productive lands. Intergroup warfare is a new form impacting on the environment. In Burma loggers are authorized to clear cut large tracts of teak forests in order to ferret out Karen guerrillas. Over 15 million refugees were thus displaced and forced to live in encampments that require trees for shelter, firewood for survival, and overgrazing of livestock. Social and economic environments are also undermined by "dependency" factors such as trade protectionism, brain drain, and limited foreign aid. The Group of 77 Non-Aligned Developing Countries proposed that discussions of the links between population and the environment be omitted from the agenda of the 1994 UN Conference on Population and Development. Basic clarifications are needed to distinguish ultimate versus proximate factors and current versus future concerns. The debate ignores distribution patterns, migration, or changing age structures. The debate blames unjustifiably rapid population growth as the ultimate cause of global environmental degradation and links population growth to a host of other social problems such as famine and refugees, while ignoring civil unrest. The evidence suggests that population limitation will probably prevent environmental degradation in poor, resource constrained countries from getting worse. Resource conservation will remain unaffected. The World Bank proposes National Environmental Action Plans or the Cleaver Schreiber proposal for a "nexus strategy" for balancing food supply and population in Africa.
Code of Federal Regulations, 2010 CFR
2010-10-01
... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...
Code of Federal Regulations, 2011 CFR
2011-10-01
... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...
Code of Federal Regulations, 2012 CFR
2012-10-01
... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...
Code of Federal Regulations, 2014 CFR
2014-10-01
... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...
Code of Federal Regulations, 2013 CFR
2013-10-01
... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...
Centaur Standard Shroud (CSS) static ultimate load structural tests
NASA Technical Reports Server (NTRS)
1975-01-01
A series of tests were conducted on the jettisonable metallic shroud used on the Titan/Centaur launch vehicle to verify its structural capabilities and to evaluate its structural interaction with the Centaur stage. A flight configured shroud and the interfacing Titan/Centaur structural assemblies were subjected to tests consisting of combinations of applied axial and shear loads to design ultimate values, including a set of tests on thermal conditions and two dynamic response tests to verify the analytical stiffness model. The strength capabilities were demonstrated at ultimate (125 percent of design limit) loads. It was also verified that the spring rate of the flight configured shroud-to-Centaur forward structural deflections of the specimen became nonlinear, as expected, above limit load values. This test series qualification program verified that the Titan/Centaur shroud and the Centaur and Titan interface components are qualified structurally at design ultimate loads.
National Launch System cycle 1 loads and models data book
NASA Technical Reports Server (NTRS)
Bugg, F.; Brunty, J.; Ernsberger, G.; Mcghee, D.; Gagliano, L.; Harrington, F.; Meyer, D.; Blades, E.
1992-01-01
This document contains preliminary cycle 1 loads for the National Launch System (NLS) 1 and 2 vehicles. The loads provided and recommended as design loads represent the maximum load expected during prelaunch and flight regimes, i.e., limit loads, except that propellant tank ullage pressure has not been included. Ullage pressure should be added to the loads book values for cases where the addition results in higher loads. The loads must be multiplied by the appropriate factors of safety to determine the ultimate loads for which the structure must be capable.
Plasticity and constraints on social evolution in African mole-rats: ultimate and proximate factors
Faulkes, Chris G.; Bennett, Nigel C.
2013-01-01
Here, we review comparative studies of African mole-rats (family Bathyergidae) to explain how constraints acting at the ultimate (environmental) and proximate (organismal) levels have led to convergent gains and losses of sociality within this extensive adaptive radiation of subterranean rodents endemic to sub-Saharan Africa. At the ultimate level, living in environments that range from mesic through to arid has led to both variation and flexibility in social organization among species, culminating in the pinnacle of social evolution in the eusocial naked and Damaraland mole-rats (Heterocephalus glaber and Fukomys damarensis). The common mole-rat (Cryptomys hottentotus) provides a model example of how plasticity in social traits exists within a single species inhabiting areas with different ecological constraint. At the proximate level, reproductive strategies and cooperative breeding may be constrained by the correlated evolution of a suite of traits including physiological suppression of reproduction, the development of physiological and morphological castes, and the mode of ovulatory control and seasonality in breeding. Furthermore, recent neurobiological advances indicate that differential patterns of neurotransmitter expression within the forebrain may underpin (and limit) either a solitary or group living/cooperative lifestyle not only in mole-rats, but also more widely among disparate mammalian taxa. PMID:23569295
Bronchiolitis Obliterans Syndrome: The Achilles’ Heel of Lung Transplantation
Weigt, S. Samuel; DerHovanessian, Ariss; Wallace, W. Dean; Lynch, Joseph P.; Belperio, John A.
2016-01-01
Lung transplantation is a therapeutic option for patients with end-stage pulmonary disorders. Unfortunately, chronic lung allograft dysfunction (CLAD), most commonly manifest as bronchiolitis obliterans syndrome (BOS), continues to be highly prevalent and is the major limitation to long-term survival. The pathogenesis of BOS is complex and involves alloimmune and nonalloimmune pathways. Clinically, BOS manifests as airway obstruction and dyspnea that are classically progressive and ultimately fatal; however, the course is highly variable, and distinguishable phenotypes may exist. There are few controlled studies assessing treatment efficacy, but only a minority of patients respond to current treatment modalities. Ultimately, preventive strategies may prove more effective at prolonging survival after lung transplantation, but their remains considerable debate and little data regarding the best strategies to prevent BOS. A better understanding of the risk factors and their relationship to the pathological mechanisms of chronic lung allograft rejection should lead to better pharmacological targets to prevent or treat this syndrome. PMID:23821508
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2010 CFR
2010-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2013 CFR
2013-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2014 CFR
2014-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2012 CFR
2012-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2011 CFR
2011-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
Development and current applications of assisted fertilization.
Palermo, Gianpiero D; Neri, Queenie V; Monahan, Devin; Kocent, Justin; Rosenwaks, Zev
2012-02-01
Since the very early establishment of in vitro insemination, it became clear that one of the limiting steps is the achievement of fertilization. Among the different assisted fertilization methods, intracytoplasmic sperm injection emerged as the ultimate technique to allow fertilization with ejaculated, epididymal, and testicular spermatozoa. This work describes the early steps that brought forth the development of intracytoplasmic sperm injection and its role in assisted reproductive techniques. The current methods to select the preferential male gamete will be elucidated and the concerns related to the offspring of severe male factor couples will be discussed. Copyright © 2012. Published by Elsevier Inc.
Energy as a Constraint on Habitability in the Subsurface
NASA Astrophysics Data System (ADS)
Hoehler, T.
2008-12-01
All living things must obtain energy from the environment to grow, to maintain a metabolic steady state, or simply to preserve viability. The availability of energy sources in the environment thus represents a key factor in determining the size, distribution, and activity of biological populations, and ultimately constrains the possibility for life itself. Lacking the abundant energy provided by solar radiation or the products of oxygenic photosynthesis, life in subsurface environments may be limited by energy availability as much as any other factor. The biological requirement for energy is expressed in two dimensions - analogous to the power and voltage requirements of electrical devices - and consideration and quantification of these requirements establishes quantitative boundary conditions on subsurface habitability. The magnitude of these requirements depends significantly on physicochemical environment, as does the provision of biologically-accessible energy from subsurface sources. With this conceptual basis, we are developing an 'energy balance' model that is designed to ultimately predict the habitability of a given environment, with respect to a given metabolism, in quantitative terms (as 'biomass density potential'). The model will develop from conceptual to quantitative as experimental and observational work constrains and quantifies, in natural populations adapted to low energy conditions, the magnitude of the biological energy requirements and the impacts of physicochemical environmental conditions on energy demand and supply.
PLAN2D - A PROGRAM FOR ELASTO-PLASTIC ANALYSIS OF PLANAR FRAMES
NASA Technical Reports Server (NTRS)
Lawrence, C.
1994-01-01
PLAN2D is a FORTRAN computer program for the plastic analysis of planar rigid frame structures. Given a structure and loading pattern as input, PLAN2D calculates the ultimate load that the structure can sustain before collapse. Element moments and plastic hinge rotations are calculated for the ultimate load. The location of hinges required for a collapse mechanism to form are also determined. The program proceeds in an iterative series of linear elastic analyses. After each iteration the resulting elastic moments in each member are compared to the reserve plastic moment capacity of that member. The member or members that have moments closest to their reserve capacity will determine the minimum load factor and the site where the next hinge is to be inserted. Next, hinges are inserted and the structural stiffness matrix is reformulated. This cycle is repeated until the structure becomes unstable. At this point the ultimate collapse load is calculated by accumulating the minimum load factor from each previous iteration and multiplying them by the original input loads. PLAN2D is based on the program STAN, originally written by Dr. E.L. Wilson at U.C. Berkeley. PLAN2D has several limitations: 1) Although PLAN2D will detect unloading of hinges it does not contain the capability to remove hinges; 2) PLAN2D does not allow the user to input different positive and negative moment capacities and 3) PLAN2D does not consider the interaction between axial and plastic moment capacity. Axial yielding and buckling is ignored as is the reduction in moment capacity due to axial load. PLAN2D is written in FORTRAN and is machine independent. It has been tested on an IBM PC and a DEC MicroVAX. The program was developed in 1988.
The ultimate quantum limits on the accuracy of measurements
NASA Technical Reports Server (NTRS)
Yuen, Horace P.
1992-01-01
A quantum generalization of rate-distortion theory from standard communication and information theory is developed for application to determining the ultimate performance limit of measurement systems in physics. For the estimation of a real or a phase parameter, it is shown that the root-mean-square error obtained in a measurement with a single-mode photon level N cannot do better than approximately N exp -1, while approximately exp(-N) may be obtained for multi-mode fields with the same photon level N. Possible ways to achieve the remarkable exponential performance are indicated.
NASA Astrophysics Data System (ADS)
O'Boyle, Shane; Wilkes, Robert; McDermott, Georgina; Ní Longphuirt, Sorcha; Murray, Clare
2015-03-01
A multivariate statistical approach was used to investigate the response of phytoplankton in Irish estuaries and nearshore coastal waters to nutrient enrichment and to examine the factors which modulate this response. The analysis suggests that while many estuaries are nutrient-enriched, relatively few display phytoplankton-related symptoms of eutrophication as the response to nutrients is primarily affected by insufficient retention time, in some by inadequate light availability, and only rarely by both factors acting together. Nearshore coastal waters are nitrogen (N) and silica (Si) limited in summer, but in some nearshore waters along the south coast, where N is elevated, phosphorus (P) is potentially limiting. The reduction in P loadings to estuarine waters is likely to lead to an improvement in the eutrophication status of these mainly P-limited waters. The disproportionate reduction in loadings of P compared to N (52% versus 24%, since the early 1990s), and the potential weakening of the estuarine N filter, as eutrophication symptoms lessen, may result in the downstream movement of nitrogen to N-limited coastal waters. These findings support the view that an integrated dual-nutrient reduction strategy is required to address eutrophication along the freshwater-marine continuum. The outcome of the analysis is a conceptual model which is of direct value and use to water managers in determining the relative susceptibility of these waters to nutrient enrichment. This understanding can in turn be used to develop informed programmes of measures which are targeted and ultimately cost effective.
Ultimate fate of constrained voters
NASA Astrophysics Data System (ADS)
Vazquez, F.; Redner, S.
2004-09-01
We examine the ultimate fate of individual opinions in a socially interacting population of leftists, centrists and rightists. In an elemental interaction between agents, a centrist and a leftist can both become centrists or both become leftists with equal rates (and similarly for a centrist and a rightist). However leftists and rightists do not interact. This interaction step between pairs of agents is applied repeatedly until the system can no longer evolve. In the mean-field limit, we determine the exact probability that the system reaches consensus (either leftist, rightist or centrist) or a frozen mixture of leftists and rightists as a function of the initial composition of the population. We also determine the mean time until the final state is reached. Some implications of our results for the ultimate fate in a limit of the Axelrod model are discussed.
Stability of DIII-D high-performance, negative central shear discharges
Hanson, Jeremy M.; Berkery, John W.; Bialek, James M.; ...
2017-03-20
Tokamak plasma experiments on the DIII-D device demonstrate high-performance, negative central shear (NCS) equilibria with enhanced stability when the minimum safety factor q min exceeds 2, qualitatively confirming theoretical predictions of favorable stability in the NCS regime. The discharges exhibit good confinement with an L-mode enhancement factor H 89 = 2.5, and are ultimately limited by the ideal-wall external kink stability boundary as predicted by ideal MHD theory, as long as tearing mode (TM) locking events, resistive wall modes (RWMs), and internal kink modes are properly avoided or controlled. Although the discharges exhibit rotating TMs, locking events are avoided asmore » long as a threshold minimum safety factor value q min > 2 is maintained. Fast timescale magnetic feedback control ameliorates RWM activity, expanding the stable operating space and allowing access to β N values approaching the ideal-wall limit. Quickly growing and rotating instabilities consistent with internal kink mode dynamics are encountered when the ideal-wall limit is reached. The RWM events largely occur between the no- and ideal-wall pressure limits predicted by ideal MHD. However, evaluating kinetic contributions to the RWM dispersion relation results in a prediction of passive stability in this regime due to high plasma rotation. In addition, the ideal MHD stability analysis predicts that the ideal-wall limit can be further increased to β N > 4 by broadening the current profile. Furthermore, this path toward improved stability has the potential advantage of being compatible with the bootstrap-dominated equilibria envisioned for advanced tokamak (AT) fusion reactors.« less
Stability of DIII-D high-performance, negative central shear discharges
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hanson, Jeremy M.; Berkery, John W.; Bialek, James M.
Tokamak plasma experiments on the DIII-D device demonstrate high-performance, negative central shear (NCS) equilibria with enhanced stability when the minimum safety factor q min exceeds 2, qualitatively confirming theoretical predictions of favorable stability in the NCS regime. The discharges exhibit good confinement with an L-mode enhancement factor H 89 = 2.5, and are ultimately limited by the ideal-wall external kink stability boundary as predicted by ideal MHD theory, as long as tearing mode (TM) locking events, resistive wall modes (RWMs), and internal kink modes are properly avoided or controlled. Although the discharges exhibit rotating TMs, locking events are avoided asmore » long as a threshold minimum safety factor value q min > 2 is maintained. Fast timescale magnetic feedback control ameliorates RWM activity, expanding the stable operating space and allowing access to β N values approaching the ideal-wall limit. Quickly growing and rotating instabilities consistent with internal kink mode dynamics are encountered when the ideal-wall limit is reached. The RWM events largely occur between the no- and ideal-wall pressure limits predicted by ideal MHD. However, evaluating kinetic contributions to the RWM dispersion relation results in a prediction of passive stability in this regime due to high plasma rotation. In addition, the ideal MHD stability analysis predicts that the ideal-wall limit can be further increased to β N > 4 by broadening the current profile. Furthermore, this path toward improved stability has the potential advantage of being compatible with the bootstrap-dominated equilibria envisioned for advanced tokamak (AT) fusion reactors.« less
Matarneh, Sulaiman K; Yen, Con-Ning; Elgin, Jennifer M; Beline, Mariane; da Luz E Silva, Saulo; Wicks, Jordan C; England, Eric M; Dalloul, Rami A; Persia, Michael E; Omara, Islam I; Shi, Hao; Gerrard, David E
2018-05-01
During postmortem metabolism, muscle pH gradually declines to reach an ultimate pH near 5.6 across most meat species. Yet, broiler pectoralis major (P. major) muscle generates meat with high ultimate pH (pH ∼ 5.9). For better understanding of the underlying mechanism responsible for this phenomenon, we evaluated the involvement of breast muscle chilling on the extent of postmortem metabolism. Broiler breast muscles were either subjected to chilling treatment (control) or left at room temperature (RT) for 120 min. P. major muscle from the RT treatment had lower ultimate pH, greater glycogen degradation and lactate accumulation. While these findings suggest that carcass chilling can contribute to the premature termination of postmortem metabolism, chilling did not fully explain the high ultimate pH of P. major muscle. Our results also revealed that glucose-6-phosphate (G6P) was very low at 24 h, and therefore we hypothesized that G6P was limiting. To test this hypothesis, muscle samples from P. major and porcine longissimus lumborum (LL) muscle were homogenized into a reaction buffer that mimics postmortem glycolysis with or without 0.5 mg/mL isolated mitochondria. While samples containing porcine LL muscle reached the normal level of ultimate pH, P. major muscle samples reached a value similar to that observed in vivo even in the presence of excess G6P, indicating that G6P was not limiting. Mitochondria enhanced the glycolytic flux and pH decline in systems containing muscle from both species. More importantly, however, was that in vitro system containing chicken with mitochondria reached pH value similar to that of samples containing LL muscle without mitochondria. To investigate further, phosphofructokinase (PFK) activity was compared in broiler P. major and porcine LL muscle at different pH values. PFK activity was lower in P. major muscle at pH 7, 6.5, and 6.2 than LL muscle. In conclusion, carcass chilling can partially contribute to the high ultimate pH of broiler P. major muscle, while low PFK activity and mitochondria content limit the flux through glycolysis.
The cause of global amphibian declines: a developmental endocrinologist's perspective.
Hayes, T B; Falso, P; Gallipeau, S; Stice, M
2010-03-15
Greater than 70% of the world's amphibian species are in decline. We propose that there is probably not a single cause for global amphibian declines and present a three-tiered hierarchical approach that addresses interactions among and between ultimate and proximate factors that contribute to amphibian declines. There are two immediate (proximate) causes of amphibian declines: death and decreased recruitment (reproductive failure). Although much attention has focused on death, few studies have addressed factors that contribute to declines as a result of failed recruitment. Further, a great deal of attention has focused on the role of pathogens in inducing diseases that cause death, but we suggest that pathogen success is profoundly affected by four other ultimate factors: atmospheric change, environmental pollutants, habitat modification and invasive species. Environmental pollutants arise as likely important factors in amphibian declines because they have realized potential to affect recruitment. Further, many studies have documented immunosuppressive effects of pesticides, suggesting a role for environmental contaminants in increased pathogen virulence and disease rates. Increased attention to recruitment and ultimate factors that interact with pathogens is important in addressing this global crisis.
The cause of global amphibian declines: a developmental endocrinologist's perspective
Hayes, T. B.; Falso, P.; Gallipeau, S.; Stice, M.
2010-01-01
Greater than 70% of the world's amphibian species are in decline. We propose that there is probably not a single cause for global amphibian declines and present a three-tiered hierarchical approach that addresses interactions among and between ultimate and proximate factors that contribute to amphibian declines. There are two immediate (proximate) causes of amphibian declines: death and decreased recruitment (reproductive failure). Although much attention has focused on death, few studies have addressed factors that contribute to declines as a result of failed recruitment. Further, a great deal of attention has focused on the role of pathogens in inducing diseases that cause death, but we suggest that pathogen success is profoundly affected by four other ultimate factors: atmospheric change, environmental pollutants, habitat modification and invasive species. Environmental pollutants arise as likely important factors in amphibian declines because they have realized potential to affect recruitment. Further, many studies have documented immunosuppressive effects of pesticides, suggesting a role for environmental contaminants in increased pathogen virulence and disease rates. Increased attention to recruitment and ultimate factors that interact with pathogens is important in addressing this global crisis. PMID:20190117
Intricate Puzzle of Oil and Gas Reserves Growth
1997-01-01
This article begins with a background discussion of the methods used to estimate proved oil and gas reserves and ultimate recovery, which is followed by a discussion of the factors that affect the ultimate recovery estimates of a field or reservoir.
Turboprop+: enhanced Turboprop diffusion-weighted imaging with a new phase correction.
Lee, Chu-Yu; Li, Zhiqiang; Pipe, James G; Debbins, Josef P
2013-08-01
Faster periodically rotated overlapping parallel lines with enhanced reconstruction (PROPELLER) diffusion-weighted imaging acquisitions, such as Turboprop and X-prop, remain subject to phase errors inherent to a gradient echo readout, which ultimately limits the applied turbo factor (number of gradient echoes between each pair of radiofrequency refocusing pulses) and, thus, scan time reductions. This study introduces a new phase correction to Turboprop, called Turboprop+. This technique employs calibration blades, which generate 2-D phase error maps and are rotated in accordance with the data blades, to correct phase errors arising from off-resonance and system imperfections. The results demonstrate that with a small increase in scan time for collecting calibration blades, Turboprop+ had a superior immunity to the off-resonance-related artifacts when compared to standard Turboprop and recently proposed X-prop with the high turbo factor (turbo factor = 7). Thus, low specific absorption rate and short scan time can be achieved in Turboprop+ using a high turbo factor, whereas off-resonance related artifacts are minimized. © 2012 Wiley Periodicals, Inc.
Changes in Math Proficiency between 8th and 10th Grades. Statistics in Brief.
ERIC Educational Resources Information Center
Rock, Don; And Others
Between 8th and 10th grades, many students are asked to make curriculum-related decisions that may ultimately influence their achievement in core academic subjects such as mathematics. While past achievement often limits the level of courses available to a student, aspirations for postsecondary education ultimately determine the level of…
78 FR 55117 - Ultimate Heat Sink for Nuclear Power Plants; Draft Regulatory Guide
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-09
... applicants may use to implement general design criteria (GDC) that are applicable to the ultimate heat sink... only for comments received on or before this date. Although a time limit is given, comments and... published guides are encouraged at any time. ADDRESSES: You may submit comment by any of the following...
DOT National Transportation Integrated Search
1962-04-01
The ultimate limitations in flight performance and in future civil air carrier equipment are the limitations imposed by what may be termed human tolerances. This is particularly applicable to the matter of the supersonic transport. The discussi...
Experimentally modeling stochastic processes with less memory by the use of a quantum processor
Palsson, Matthew S.; Gu, Mile; Ho, Joseph; Wiseman, Howard M.; Pryde, Geoff J.
2017-01-01
Computer simulation of observable phenomena is an indispensable tool for engineering new technology, understanding the natural world, and studying human society. However, the most interesting systems are often so complex that simulating their future behavior demands storing immense amounts of information regarding how they have behaved in the past. For increasingly complex systems, simulation becomes increasingly difficult and is ultimately constrained by resources such as computer memory. Recent theoretical work shows that quantum theory can reduce this memory requirement beyond ultimate classical limits, as measured by a process’ statistical complexity, C. We experimentally demonstrate this quantum advantage in simulating stochastic processes. Our quantum implementation observes a memory requirement of Cq = 0.05 ± 0.01, far below the ultimate classical limit of C = 1. Scaling up this technique would substantially reduce the memory required in simulations of more complex systems. PMID:28168218
NASA Astrophysics Data System (ADS)
Bayanov, V. I.; Vinokurov, G. N.; Zhulin, V. I.; Yashin, V. E.
1989-02-01
A numerical calculation is reported of an inversion conservation coefficient of cylindrical rod solid-state amplifiers with the active element diameter from 1.5 to 15 cm operated under continuous pumping conditions. It is shown that the ultimate gain, limited only by superluminescence, exceeds considerably the value usually obtained in experiments. Various methods of eliminating parasitic effects, which limit the gain of real amplifiers, are considered. The degree of influence of these effects on the inversion conservation coefficient is discussed. The results are given of an experimental determination of the gain close to the ultimate value (0.18 cm- 1 for an active element 3 cm in diameter). Calculations are reported of the angular distributions of superluminescence and parasitic modes demonstrating that the latter can be suppressed by spatial filtering.
Physical and chemical microstructural damage in pressed CL-20 explosives
NASA Astrophysics Data System (ADS)
Demol, Gauthier; Sandusky, Harold W.
2000-04-01
The ultimate utility of CL-20 as an ingredient in explosive and propellant formulations will depend upon the ability to understand the factors that are responsible for batch-to-batch variability with respect to sensitivity, and also to control the sensitivity in formulations within acceptable limits. We used light microscopy of cold-mounted, polished samples to characterize CL-20 at various stages in its life cycle. The evolution of damage from the initial neat crystals of CL-20 to the ready-to-use pressed pellets shows that processing seriously damages the crystals. These crystals are very brittle, and several explanations are proposed.
Quality improvement in hospitals: how much does it reduce healthcare costs?
Jones, S B
1995-01-01
The philosophy of W.E. Deming suggests that continuous quality improvement efforts, when properly applied, ultimately will lead to financial dividends and will help ensure business longevity. Reducing hospital charges can be exciting for the participants and can provide an impetus for expanding quality improvement efforts. Americans, however, tend to demand almost instant gratification and have limited patience for longer-term results. This factor, coupled with minimal knowledge of actual operational costs and inaccurate charge accounting systems, may lead hospital managers to misinterpret the potential net long-term effects of their quality improvement efforts. In the approaching environment of capitated reimbursement, such mistakes may have serious consequences.
Drone inflight mixing of biochemical samples.
Katariya, Mayur; Chung, Dwayne Chung Kim; Minife, Tristan; Gupta, Harshit; Zahidi, Alifa Afiah Ahmad; Liew, Oi Wah; Ng, Tuck Wah
2018-03-15
Autonomous systems for sample transport to the laboratory for analysis can be improved in terms of timeliness, cost and error mitigation in the pre-analytical testing phase. Drones have been reported for outdoor sample transport but incorporating devices on them to attain homogenous mixing of reagents during flight to enhance sample processing timeliness is limited by payload issues. It is shown here that flipping maneuvers conducted with quadcopters are able to facilitate complete and gentle mixing. This capability incorporated during automated sample transport serves to address an important factor contributing to pre-analytical variability which ultimately impacts on test result reliability. Copyright © 2018 Elsevier Inc. All rights reserved.
Pricing Health Behavior Interventions to Promote Adoption
Ribisl, Kurt M.; Leeman, Jennifer; Glasser, Allison M.
2015-01-01
The relatively high cost of delivering many public health interventions limits their potential for broad public impact by reducing their likelihood of adoption and maintenance over time. Practitioners identify cost as the primary factor for which interventions they select to implement, but researchers rarely disseminate cost information or consider its importance when developing new interventions. A new approach is proposed, whereby intervention developers assess what individuals and agencies adopting their interventions are willing to pay and then design interventions that are responsive to this price range. The ultimate goal is to develop effective and affordable interventions, called lean interventions, which are widely adopted and have greater public health impact. PMID:24842743
Vaccine production, distribution, access and uptake
Smith, Jon; Lipsitch, Marc; Almond, Jeffrey W.
2011-01-01
Making human vaccines available on a global scale requires the use of complex production methods, meticulous quality control and reliable distribution channels that ensure the products are potent and effective at their point of use. The technologies involved in manufacturing different types of vaccines may strongly influence vaccine cost, ease of industrial scale-up, stability and ultimately world-wide availability. Manufacturing complexity is compounded by the need for different formulations for different countries and age groups. Reliable vaccine production in appropriate quantities and at affordable prices is the cornerstone of developing global vaccination policies. However, ensuring optimal access and uptake also requires strong partnerships between private manufacturers, regulatory authorities and national and international public health services. For vaccines whose supplies are limited, either due to rapidly emerging diseases or longer-term mismatch of supply and demand, prioritizing target groups can increase vaccine impact. Focusing on influenza vaccines as an example that well illustrates many of the relevant points, this article considers current production, distribution, access and other factors that ultimately impact on vaccine uptake and population-level effectiveness. PMID:21664680
Sex differences in the brain-an interplay of sex steroid hormones and sex chromosomes.
Grgurevic, Neza; Majdic, Gregor
2016-09-01
Although considerable progress has been made in our understanding of brain function, many questions remain unanswered. The ultimate goal of studying the brain is to understand the connection between brain structure and function and behavioural outcomes. Since sex differences in brain morphology were first observed, subsequent studies suggest different functional organization of the male and female brains in humans. Sex and gender have been identified as being a significant factor in understanding human physiology, health and disease, and the biological differences between the sexes is not limited to the gonads and secondary sexual characteristics, but also affects the structure and, more crucially, the function of the brain and other organs. Significant variability in brain structures between individuals, in addition to between the sexes, is factor that complicates the study of sex differences in the brain. In this review, we explore the current understanding of sex differences in the brain, mostly focusing on preclinical animal studies. © 2016 The Author(s). published by Portland Press Limited on behalf of the Biochemical Society.
Prospects and Limits of Energy Storage in Batteries.
Abraham, K M
2015-03-05
Energy densities of Li ion batteries, limited by the capacities of cathode materials, must increase by a factor of 2 or more to give all-electric automobiles a 300 mile driving range on a single charge. Battery chemical couples with very low equivalent weights have to be sought to produce such batteries. Advanced Li ion batteries may not be able to meet this challenge in the near term. The state-of-the-art of Li ion batteries is discussed, and the challenges of developing ultrahigh energy density rechargeable batteries are identified. Examples of ultrahigh energy density battery chemical couples include Li/O2, Li/S, Li/metal halide, and Li/metal oxide systems. Future efforts are also expected to involve all-solid-state batteries with performance similar to their liquid electrolyte counterparts, biodegradable batteries to address environmental challenges, and low-cost long cycle-life batteries for large-scale energy storage. Ultimately, energy densities of electrochemical energy storage systems are limited by chemistry constraints.
Biocatalytic coatings for air pollution control: a proof of concept study on VOC biodegradation.
Estrada, José M; Bernal, Oscar I; Flickinger, Michael C; Muñoz, Raúl; Deshusses, Marc A
2015-02-01
Although biofilm-based biotechnologies exhibit a large potential as solutions for off-gas treatment, the high water content of biofilms often causes pollutant mass transfer limitations, which ultimately limit their widespread application. The present study reports on the proof of concept of the applicability of bioactive latex coatings for air pollution control. Toluene vapors served as a model volatile organic compound (VOC). The results showed that Pseudomonas putida F1 cells could be successfully entrapped in nanoporous latex coatings while preserving their toluene degradation activity. Bioactive latex coatings exhibited toluene specific biodegradation rates 10 times higher than agarose-based biofilms, because the thin coatings were less subject to diffusional mass transfer limitations. Drying and pollutant starvation were identified as key factors inducing a gradual deterioration of the biodegradation capacity in these innovative coatings. This study constitutes the first application of bioactive latex coatings for VOC abatement. These coatings could become promising means for air pollution control. © 2014 Wiley Periodicals, Inc.
[Lifestyle medicine: the importance of considering all the causes of disease].
Mora Ripoll, Ramón
2012-01-01
The enormous potential effects of health behavior change on mortality, morbidity, and health care costs provide ample motivation for the concept of lifestyle medicine. Lifestyle medicine involves the therapeutic use of lifestyle interventions on health and quality of life, and considers not only risk factors and markers, but also a range of antecedent factors from all levels of causality. Treatment would ultimate employ a combination of clinical (patient-centered) and public-health interventions. Examples of target patient behaviors include, but are not limited to, eliminating tobacco use, moderating alcohol consumption, increasing physical activity, improving diet, sleep, and emotional and mental well-being. The effective implementation of lifestyle medicine should be a priority within the necessary changes in current healthcare systems and public health policies. Copyright © 2010 SEP y SEPB. Published by Elsevier Espana. All rights reserved.
Molecular basis of physiological heart growth: fundamental concepts and new players
Maillet, Marjorie; van Berlo, Jop H.; Molkentin, Jeffery D.
2015-01-01
The heart hypertrophies in response to developmental signals as well as increased workload. Although adult-onset hypertrophy can ultimately lead to disease, cardiac hypertrophy is not necessarily maladaptive and can even be beneficial. Progress has been made in our understanding of the structural and molecular characteristics of physiological cardiac hypertrophy, as well as of the endocrine effectors and associated signalling pathways that regulate it. Physiological hypertrophy is initiated by finite signals, which include growth hormones (such as thyroid hormone, insulin, insulin-like growth factor 1 and vascular endothelial growth factor) and mechanical forces that converge on a limited number of intracellular signalling pathways (such as PI3K, AKT, AMP-activated protein kinase and mTOR) to affect gene transcription, protein translation and metabolism. Harnessing adaptive signalling mediators to reinvigorate the diseased heart could have important medical ramifications. PMID:23258295
Stability of DIII-D high-performance, negative central shear discharges
NASA Astrophysics Data System (ADS)
Hanson, J. M.; Berkery, J. W.; Bialek, J.; Clement, M.; Ferron, J. R.; Garofalo, A. M.; Holcomb, C. T.; La Haye, R. J.; Lanctot, M. J.; Luce, T. C.; Navratil, G. A.; Olofsson, K. E. J.; Strait, E. J.; Turco, F.; Turnbull, A. D.
2017-05-01
Tokamak plasma experiments on the DIII-D device (Luxon et al 2005 Fusion Sci. Tech. 48 807) demonstrate high-performance, negative central shear (NCS) equilibria with enhanced stability when the minimum safety factor {{q}\\text{min}} exceeds 2, qualitatively confirming theoretical predictions of favorable stability in the NCS regime. The discharges exhibit good confinement with an L-mode enhancement factor H 89 = 2.5, and are ultimately limited by the ideal-wall external kink stability boundary as predicted by ideal MHD theory, as long as tearing mode (TM) locking events, resistive wall modes (RWMs), and internal kink modes are properly avoided or controlled. Although the discharges exhibit rotating TMs, locking events are avoided as long as a threshold minimum safety factor value {{q}\\text{min}}>2 is maintained. Fast timescale magnetic feedback control ameliorates RWM activity, expanding the stable operating space and allowing access to {β\\text{N}} values approaching the ideal-wall limit. Quickly growing and rotating instabilities consistent with internal kink mode dynamics are encountered when the ideal-wall limit is reached. The RWM events largely occur between the no- and ideal-wall pressure limits predicted by ideal MHD. However, evaluating kinetic contributions to the RWM dispersion relation results in a prediction of passive stability in this regime due to high plasma rotation. In addition, the ideal MHD stability analysis predicts that the ideal-wall limit can be further increased to {β\\text{N}}>4 by broadening the current profile. This path toward improved stability has the potential advantage of being compatible with the bootstrap-dominated equilibria envisioned for advanced tokamak (AT) fusion reactors.
Isocurvature forecast in the anthropic axion window
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hamann, J.; Hannestad, S.; Raffelt, G.G.
2009-06-01
We explore the cosmological sensitivity to the amplitude of isocurvature fluctuations that would be caused by axions in the ''anthropic window'' where the axion decay constant f{sub a} >> 10{sup 12} GeV and the initial misalignment angle Θ{sub i} << 1. In a minimal ΛCDM cosmology extended with subdominant scale-invariant isocurvature fluctuations, existing data constrain the isocurvature fraction to α < 0.09 at 95% C.L. If no signal shows up, Planck can improve this constraint to 0.042 while an ultimate CMB probe limited only by cosmic variance in both temperature and E-polarisation can reach 0.017, about a factor of fivemore » better than the current limit. In the parameter space of f{sub a} and H{sub I} (Hubble parameter during inflation) we identify a small region where axion detection remains within the reach of realistic cosmological probes.« less
The cost of cancer care: Part II.
Eagle, David
2012-11-01
The rising cost of cancer treatment competes with the availability of effective therapy as a limiting factor in our war on cancer. Specific programs are being developed that have the potential to slow the growth in spending on oncology care. The Affordable Care Act includes provisions for containing healthcare costs, such as accountable care organizations and the Independent Payment Advisory Board. Within oncology, specific programs have emerged, including clinical pathways, episode-of-care based payment arrangements, and the oncology medical home. All models of cost containment have strengths and weaknesses. Outside of the United States, explicit rationing exists' through national health technology assessment organizations. Excessive demands on physicians to limit spending at the bedside could potentially create conflicts with their professional responsibility to patients. While spending for cancer care in the US is high, its "worth" is ultimately a societal decision. Recent economic modeling suggests that we may be achieving value for the money we spend.
L2 and L3 Ultimate Attainment: An Investigation of Two Parameters
ERIC Educational Resources Information Center
Hermas, Abdelkader
2014-01-01
This study considers the upper limit of ultimate attainment in the L2 French and L3 English of trilingual learners. The learners are native speakers of Moroccan Arabic who started learning L2 French at eight and L3 English at 16. They are advanced in both languages. Four constructions representing the verb movement and null subject parameter were…
ERIC Educational Resources Information Center
Schmid, Monika S.; Gilbers, Steven; Nota, Amber
2014-01-01
The present article provides an exploration of ultimate attainment in second language (L2) and its limitations. It is argued that the question of maturational constraints can best be investigated when the reference population is bilingual and exposed on a regular basis to varieties of their first language (L1) that show cross-linguistic influence.…
Absorption spectroscopy at the ultimate quantum limit from single-photon states
NASA Astrophysics Data System (ADS)
Whittaker, R.; Erven, C.; Neville, A.; Berry, M.; O'Brien, J. L.; Cable, H.; Matthews, J. C. F.
2017-02-01
Absorption spectroscopy is routinely used to characterise chemical and biological samples. For the state-of-the-art in laser absorption spectroscopy, precision is theoretically limited by shot-noise due to the fundamental Poisson-distribution of photon number in laser radiation. In practice, the shot-noise limit can only be achieved when all other sources of noise are eliminated. Here, we use wavelength-correlated and tuneable photon pairs to demonstrate how absorption spectroscopy can be performed with precision beyond the shot-noise limit and near the ultimate quantum limit by using the optimal probe for absorption measurement—single photons. We present a practically realisable scheme, which we characterise both the precision and accuracy of by measuring the response of a control feature. We demonstrate that the technique can successfully probe liquid samples and using two spectrally similar types of haemoglobin we show that obtaining a given precision in resolution requires fewer heralded single probe photons compared to using an idealised laser.
Improvement of SPM nonlinear limit by chirped duobinary PolSK transmission
NASA Astrophysics Data System (ADS)
Yang, Lixiu; Fan, Jiayu; Wang, Lutang; Huang, Zhaoming
2005-02-01
In today's terrestrial long-haul optical fiber communication systems, high channel powers are required to obtain a large transmission distance with reasonable optical amplifier spacing. In such systems, however, the presence of nonlinear effects such as the self-phase modulation (SPM) and the fiber dispersion as well as their combined effects, called SPM-induced nonlinear limitation or SPM limit, will seriously degrade the system performances in respect of the effective transmission distance and ultimately become a limiting factor in high-speed, long-haul optical fiber transmission.In this paper, a new transmission format: chirped duobinary PolSK transmission, has been proposed to generate a pre-chirped duobianry signal with fixed polarity (either positive or negative), which is modulated by a PolSK modulator. This format is based on a transmitter setup consisting of a duobinary PolSK Modulation transmitter followed by an additional phase modulator. The chirped duobinary PolSK transmission reduces the signal degradation and spectral broadening in the nonlinear regime significantly. Thus it shifts this SPM nonlinear limit to enable more relaxed dispersion compensation at high optical power compared to the conventional duobinary schemes.The simulation results show chirped duobinary PolSK transmission enlarges the dispersion limited transmission distance, increases the dispersion tolerance and overcome the SPM nonlinear limit.
Ko, Ya-Ping; Flick, Matthew J.
2017-01-01
Fibrinogen not only plays a pivotal role in hemostasis but also serves key roles in antimicrobial host defense. As a rapidly assembled provisional matrix protein, fibrin(ogen) can function as an early line of host protection by limiting bacterial growth, suppressing dissemination of microbes to distant sites, and mediating host bacterial killing. Fibrinogen-mediated host antimicrobial activity occurs predominantly through two general mechanisms, namely, fibrin matrices functioning as a protective barrier and fibrin(ogen) directly or indirectly driving host protective immune function. The potential of fibrin to limit bacterial infection and disease has been countered by numerous bacterial species evolving and maintaining virulence factors that engage hemostatic system components within vertebrate hosts. Bacterial factors have been isolated that simply bind fibrinogen or fibrin, promote fibrin polymer formation, or promote fibrin dissolution. Staphylococcus aureus is an opportunistic gram-positive bacterium, the causative agent of a wide range of human infectious diseases, and a prime example of a pathogen exquisitely sensitive to host fibrinogen. Indeed, current data suggest fibrinogen serves as a context-dependent determinant of host defense or pathogen virulence in Staphylococcus infection whose ultimate contribution is dictated by the expression of S. aureus virulence factors, the path of infection, and the tissue microenvironment. PMID:27056151
Pfrommer, Andreas; Henning, Anke
2017-05-01
The ultimate intrinsic signal-to-noise ratio (SNR) is a coil independent performance measure to compare different receive coil designs. To evaluate this benchmark in a sample, a complete electromagnetic basis set is required. The basis set can be obtained by curl-free and divergence-free surface current distributions, which excite linearly independent solutions to Maxwell's equations. In this work, we quantitatively investigate the contribution of curl-free current patterns to the ultimate intrinsic SNR in a spherical head-sized model at 9.4 T. Therefore, we compare the ultimate intrinsic SNR obtained with having only curl-free or divergence-free current patterns, with the ultimate intrinsic SNR obtained from a combination of curl-free and divergence-free current patterns. The influence of parallel imaging is studied for various acceleration factors. Moreover results for different field strengths (1.5 T up to 11.7 T) are presented at specific voxel positions and acceleration factors. The full-wave electromagnetic problem is analytically solved using dyadic Green's functions. We show, that at ultra-high field strength (B 0 ⩾7T) a combination of curl-free and divergence-free current patterns is required to achieve the best possible SNR at any position in a spherical head-sized model. On 1.5- and 3T platforms, divergence-free current patterns are sufficient to cover more than 90% of the ultimate intrinsic SNR. Copyright © 2017 John Wiley & Sons, Ltd.
Ultimate Cost of Building Walls.
ERIC Educational Resources Information Center
Grimm, Clayford T.; Gross, James G.
The need for economic analysis of building walls is discussed, and the factors influencing the ultimate cost of exterior walls are studied. The present worth method is used to analyze three types of exterior non-loadbearing panel or curtain walls. Anticipated costs are expressed in terms of their present value per square foot of wall area. The…
Exploring the Powerful Ionised Wind in the Seyfert Galaxy PG1211+143
NASA Astrophysics Data System (ADS)
Pounds, Ken
2013-10-01
Highly-ionised high-speed winds in AGN (UFOs) were first detected with XMM-Newton a decade ago, and are now established as a key factor in the study of SMBH accretion, and in the growth and metal enrichment of their host galaxies. However, information on the ionisation and dynamical structure, and the ultimate fate of UFOs remains very limited. We request a 600ks extended XMM-Newton study of the prototype UFO PG1211+143 in AO-13, to obtain high quality EPIC and RGS spectra, to map the flow structure and variability, while seeking evidence for the anticipated interaction with the ISM and possible conversion of the energetic wind to a momentum-driven flow.
The gender gap in sport performance: equity influences equality.
Capranica, Laura; Piacentini, Maria Francesca; Halson, Shona; Myburgh, Kathryn H; Ogasawara, Etsuko; Millard-Stafford, Mindy
2013-01-01
Sport is recognized as playing a relevant societal role to promote education, health, intercultural dialogue, and the individual development, regardless of an individual's gender, race, age, ability, religion, political affiliation, sexual orientation, and socioeconomic background. Yet, it was not until the 2012 Summer Olympic Games in London that every country's delegation included a female competitor. The gender gap in sport, although closing, remains, due to biological differences affecting performance, but it is also influenced by reduced opportunity and sociopolitical factors that influence full female participation across a range of sports around the world. Until the cultural environment is equitable, scientific discussion related to physiological differences using methods that examine progression in male and female world-record performances is limited. This commentary is intended to provide a forum to discuss issues underlying gender differences in sport performance from a global perspective and acknowledge the influence of cultural and sociopolitical factors that continue to ultimately affect female performance.
Richards, Rickelle; Smith, Chery
2007-10-01
In-depth interviews were conducted with homeless children (n=56, aged 6-13 years) in an urban center in Minnesota, USA, to determine factors influencing food choice, food access, and weight status, with interview questions developed using the Social Cognitive Theory. Interview transcripts were coded and then evaluated both collectively and by weight status (<85th percentile=normal weight vs. > or = 85th percentile=overweight). Forty-five percent of children were overweight. Environmental, parental, and personal factors emerged as common themes influencing food access and choice. Despite children's personal food preferences, homelessness and the shelter environment created restrictive conditions that influenced food choice and access. Shelter rules, lack of adequate storage and cooking facilities, and limited food stores near the shelter, impacted the type and quality of food choices, ultimately affecting hunger, weight status, and perceived health.
Turbulence in high-beta ASDEX upgrade advanced scenarios
NASA Astrophysics Data System (ADS)
Doerk, H.; Bock, A.; Di Siena, A.; Fable, E.; Görler, T.; Jenko, F.; Stober, J.; The ASDEX Upgrade Team
2018-01-01
Recent experiments at ASDEX Upgrade achieve non-inductive operation in full tungsten wall conditions by applying electron cyclotron and neutral beam current drive. These discharges are characterised by a well-measured safety factor profile, which does not drop below one, and a good energy confinement. By reproducing the experimental heat fluxes, nonlinear gyrokinetic simulations suggest that the observed strong peaking of the ion temperature in the core is caused by the stabilising impact of a significant beam ion content, as well as strong electromagnetic effects on turbulent transport. Quasilinear transport models are not yet applicable in this interesting and reactor relevant parameter regime, but available simulation data may serve as a testbed for improvements. As the present plasma is close to the kinetic ballooning (KBM) threshold, elevating the safety factor profile under otherwise identical conditions is proposed to clarify, whether profiles are ultimately limited by KBM turbulence, or by global stability constraints.
Platelet-Rich Plasma in Bone Regeneration: Engineering the Delivery for Improved Clinical Efficacy
Rodriguez, Isaac A.; Growney Kalaf, Emily A.; Bowlin, Gary L.; Sell, Scott A.
2014-01-01
Human bone is a tissue with a fairly remarkable inherent capacity for regeneration; however, this regenerative capacity has its limitations, and defects larger than a critical size lack the ability to spontaneously heal. As such, the development and clinical translation of effective bone regeneration modalities are paramount. One regenerative medicine approach that is beginning to gain momentum in the clinical setting is the use of platelet-rich plasma (PRP). PRP therapy is essentially a method for concentrating platelets and their intrinsic growth factors to stimulate and accelerate a healing response. While PRP has shown some efficacy in both in vitro and in vivo scenarios, to date its use and delivery have not been optimized for bone regeneration. Issues remain with the effective delivery of the platelet-derived growth factors to a localized site of injury, the activation and temporal release of the growth factors, and the rate of growth factor clearance. This review will briefly describe the physiological principles behind PRP use and then discuss how engineering its method of delivery may ultimately impact its ability to successfully translate to widespread clinical use. PMID:25050347
Factors affecting nest survival of Henslow's Sparrows (Ammodramus henslowii) in southern Indiana
Crimmins, Shawn M.; McKann, Patrick C.; Robb, Joseph R.; Lewis, Jason P.; Vanosdol, Teresa; Walker, Benjamin A.; Williams, Perry J.; Thogmartin, Wayne E.
2016-01-01
Populations of Henslow’s Sparrows have declined dramatically in recent decades, coinciding with widespread loss of native grassland habitat. Prescribed burning is a primary tool for maintaining grassland patches, but its effects on nest survival of Henslow’s Sparrows remains largely unknown, especially in conjunction with other factors. We monitored 135 nests of Henslow’s Sparrows at Big Oaks National Wildlife Refuge in southern Indiana from 1998–2001 in an effort to understand factors influencing nest survival, including prescribed burning of habitat. We used a mixed-effects implementation of the logistic exposure model to predict daily nest survival in an information theoretic framework. We found that daily survival declined near the onset of hatching and increased with the height of standing dead vegetation, although this relationship was weak. We found only nominal support to suggest that time since burn influenced nest survival. Overall, nest age was the most important factor in estimating daily nest survival rates. Our daily survival estimate from our marginal model (0.937) was similar to that derived from the Mayfield method (0.944) suggesting that our results are comparable to previous studies using the Mayfield approach. Our results indicate that frequent burning to limit woody encroachment into grassland habitats might benefit Henslow’s Sparrow, but that a variety of factors ultimately influence daily nest survival. However, we note that burning too frequently can also limit occupancy by Henslow’s Sparrows. We suggest that additional research is needed to determine the population-level consequences of habitat alteration and if other extrinsic factors influence demographics of Henslow’s Sparrows.
LaBonte, Michelle L
2014-09-01
Since its initial discovery in the 1940s, factor V has long been viewed as an important procoagulant protein in the coagulation cascade. However, in the later part of the 20th century, two different scientists proposed novel anticoagulant roles for factor V. Philip Majerus proposed the first anticoagulant function for factor V in 1983, yet ultimately it was not widely accepted by the broader scientific community. In contrast, Björn Dahlbäck proposed a different anticoagulant role for factor V in 1994. While this role was initially contested, it was ultimately accepted and integrated into the scientific framework. In this paper, I present a detailed historical account of these two anticoagulant discoveries and propose three key reasons why Dahlbäck's anticoagulant role for factor V was accepted whereas Majerus' proposed role was largely overlooked. Perhaps most importantly, Dahlbäck's proposed anticoagulant role was of great clinical interest because the discovery involved the study of an important subset of patients with thrombophilia. Soon after Dahlbäck's 1994 work, this patient population was shown to possess the factor V Leiden mutation. Also key in the ultimate acceptance of the second proposed anticoagulant role was the persistence of the scientist who made the discovery and the interest in and ability of others to replicate and reinforce this work. This analysis of two different yet similar discoveries sheds light on factors that play an important role in how new discoveries are incorporated into the existing scientific framework. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.
Structural Deterministic Safety Factors Selection Criteria and Verification
NASA Technical Reports Server (NTRS)
Verderaime, V.
1992-01-01
Though current deterministic safety factors are arbitrarily and unaccountably specified, its ratio is rooted in resistive and applied stress probability distributions. This study approached the deterministic method from a probabilistic concept leading to a more systematic and coherent philosophy and criterion for designing more uniform and reliable high-performance structures. The deterministic method was noted to consist of three safety factors: a standard deviation multiplier of the applied stress distribution; a K-factor for the A- or B-basis material ultimate stress; and the conventional safety factor to ensure that the applied stress does not operate in the inelastic zone of metallic materials. The conventional safety factor is specifically defined as the ratio of ultimate-to-yield stresses. A deterministic safety index of the combined safety factors was derived from which the corresponding reliability proved the deterministic method is not reliability sensitive. The bases for selecting safety factors are presented and verification requirements are discussed. The suggested deterministic approach is applicable to all NASA, DOD, and commercial high-performance structures under static stresses.
Siu, Heidi; Spence Laschinger, Heather K; Finegan, Joan
2008-05-01
The aim of this study was to examine the impact of nurses' perceived professional practice environment on their quality of nursing conflict management approaches and ultimately their perceptions of unit effectiveness from the perspective of Deutsch's theory of constructive conflict management. Rising reports of hostility and conflict among Canadian nurses are a concern to nurses' health and the viability of effective patient care delivery. However, research on the situational factors that influence nurses' ability to apply effective conflict resolution skills that lead to positive results in practice is limited. A nonexperimental, predictive design was used in a sample of 678 registered nurses working in community hospitals within a large metropolitan area in Ontario. The results supported a modified version of the hypothesized model [chi2(1) = 16.25, Goodness of Fit = 0.99, Comparative Fit Index = 0.98, Root-Mean-Square Error of Approximation = 0.15] linking professional practice environment and core self-evaluation to nurses' conflict management and, ultimately, unit effectiveness. Professional practice environment, conflict management, and core-self evaluation explained approximately 46.6% of the variance in unit effectiveness. Positive professional practice environments and high core self-evaluations predicted nurses' constructive conflict management and, in turn, greater unit effectiveness.
Predicting performance in competitive apnea diving, part II: dynamic apnoea.
Schagatay, Erika
2010-03-01
Part I of this series of articles identified the main physiological factors defining the limits of static apnea, while this paper reviews the factors involved when physical work is added in the dynamic distance disciplines, performed in shallow water in a swimming pool. Little scientific work has been done concerning the prerequisites and limitations of swimming with or without fins whilst breath holding to extreme limits. Apneic duration influences all competitive apnea disciplines, and can be prolonged by any means that increase gas storage or tolerance to asphyxia, or reduce metabolic rate, as reviewed in the first article. For horizontal underwater distance swimming, the main challenge is to restrict metabolism despite the work, and to direct blood flow only to areas where demand is greatest, to allow sustained function. Here, work economy, local tissue energy and oxygen stores and the anaerobic capacity of the muscles are key components. Improvements in swimming techniques and, especially in swimming with fins, equipment have already contributed to enhanced performance and may do so further. High lactate levels observed after competition swims suggest a high anaerobic component, and muscle hypoxia could ultimately limit muscle work and swimming distance. However, the frequency of syncope, especially in swimming without fins, suggests that cerebral oxygenation may often be compromised before this occurs. In these pool disciplines, safety is high and the dive can be interrupted by the competitor or safety diver within seconds. The safety routines in place during pool competitions are described.
Exploring Ultimate Water Capillary Evaporation in Nanoscale Conduits.
Li, Yinxiao; Alibakhshi, Mohammad Amin; Zhao, Yihong; Duan, Chuanhua
2017-08-09
Capillary evaporation in nanoscale conduits is an efficient heat/mass transfer strategy that has been widely utilized by both nature and mankind. Despite its broad impact, the ultimate transport limits of capillary evaporation in nanoscale conduits, governed by the evaporation/condensation kinetics at the liquid-vapor interface, have remained poorly understood. Here we report experimental study of the kinetic limits of water capillary evaporation in two dimensional nanochannels using a novel hybrid channel design. Our results show that the kinetic-limited evaporation fluxes break down the limits predicated by the classical Hertz-Knudsen equation by an order of magnitude, reaching values up to 37.5 mm/s with corresponding heat fluxes up to 8500 W/cm 2 . The measured evaporation flux increases with decreasing channel height and relative humidity but decreases as the channel temperature decreases. Our findings have implications for further understanding evaporation at the nanoscale and developing capillary evaporation-based technologies for both energy- and bio-related applications.
Muskellunge growth potential in northern Wisconsin: implications for trophy management
Faust, Matthew D.; Isermann, Daniel A.; Luehring, Mark A.; Hansen, Michael J.
2015-01-01
The growth potential of Muskellunge Esox masquinongy was evaluated by back-calculating growth histories from cleithra removed from 305 fish collected during 1995–2011 to determine whether it was consistent with trophy management goals in northern Wisconsin. Female Muskellunge had a larger mean asymptotic length (49.8 in) than did males (43.4 in). Minimum ultimate size of female Muskellunge (45.0 in) equaled the 45.0-in minimum length limit, but was less than the 50.0-in minimum length limit used on Wisconsin's trophy waters, while the minimum ultimate size of male Muskellunge (34.0 in) was less than the statewide minimum length limit. Minimum reproductive sizes for both sexes were less than Wisconsin's trophy minimum length limits. Mean growth potential of female Muskellunge in northern Wisconsin appears to be sufficient for meeting trophy management objectives and angler expectations. Muskellunge in northern Wisconsin had similar growth potential to those in Ontario populations, but lower growth potential than Minnesota's populations, perhaps because of genetic and environmental differences.
Ultimate Limit to the Spatial Resolution in Magnetic Imaging
NASA Astrophysics Data System (ADS)
Matthews, John; Wellstood, Frederick C.; Chatraphorn, Sojiphong
2003-03-01
Motivated by the continual improvement in the spatial resolution of source currents detected by magnetic field imaging, in particular scanning SQUID microscopy, we have determined a theoretical limit to the spatial resolution for a given set of parameters. The guiding principle here is that by adding known information (e.g. CAD diagram) about the source currents into the inversion algorithm, we reduce the number of unknown parameters and hence lower the uncertainty in the remaining parameters. We consider the ultimate limit to be the case where all the information about the system is known, except for a single parameter, e.g. the separation w of two long, straight wires each carrying a current I/2. For this particular example we find that for a current I=100;μA, with magnetic field noise Δ B=10 pT, at a standoff z=100;μm, the minimum resolvable separation is 2;μm, about an order of magnitude less than the present limit.
Brand, Richard A; Stanford, Clark M; Swan, Colby C
2003-01-01
Joint implant design clearly affects long-term outcome. While many implant designs have been empirically-based, finite element analysis has the potential to identify beneficial and deleterious features prior to clinical trials. Finite element analysis is a powerful analytic tool allowing computation of the stress and strain distribution throughout an implant construct. Whether it is useful depends upon many assumptions and details of the model. Since ultimate failure is related to biological factors in addition to mechanical, and since the mechanical causes of failure are related to load history, rather than a few loading conditions, chief among them is whether the stresses or strains under limited loading conditions relate to outcome. Newer approaches can minimize this and the many other model limitations. If the surgeon is to critically and properly interpret the results in scientific articles and sales literature, he or she must have a fundamental understanding of finite element analysis. We outline here the major capabilities of finite element analysis, as well as the assumptions and limitations. PMID:14575244
Chan, Ruth S. M.; Sea, Mandy M. M.
2017-01-01
This review aims to provide an overview of the factors associated with adherence reported in existing literature on lifestyle modification programs for weight management among the adult population. An electronic search was performed using PubMed, Medline, PsycINFO and PsycARTICLE to identify studies that examined the factors of adherence to lifestyle modification programs with explicit definition of adherence indicators. We identified 19 studies published between 2004 and 2016. The most commonly used indicator of adherence was attrition, followed by attendance, self-monitoring and dietary adherence. A broad array of factors has been studied but only few studies exploring each factor. Limited evidence suggested older age, higher education, healthier eating and physical activity behaviours, higher stage of change at baseline and higher initial weight loss may predict better adherence. On the other hand, having depression, stress, strong body shape concern, more previous weight loss attempts and being unemployed may predict poor adherence. Inconsistent findings were obtained for self-efficacy, motivation and male gender. This review highlights the need for more rigorous studies to enhance our knowledge on factors related to adherence. Identification of the factors of adherence could provide important implication for program improvement, ultimately improving the effectiveness and the cost-effectiveness of lifestyle modification program. PMID:28813030
Long Term Displacement Data of Woven Fabric Webbings Under Constant Load for Inflatable Structures
NASA Technical Reports Server (NTRS)
Kenner, Winfred S.; Jones, Thomas C.; Doggett, William R.; Lucy, Melvin H.; Grondin, Trevor A.; Whitley, Karen S.; Duncan, Quinton; Plant, James V.
2014-01-01
Inflatable modules for space applications offer weight and launch volume savings relative to current metallic modules. Limited data exist on the creep behavior of the restraint layer of inflatable modules. Long-term displacement and strain data of two high strength woven fabric webbings, Kevlar and Vectran, under constant load is presented. The creep behavior of webbings is required by designers to help determine service life parameters of inflatable modules. Four groups of different webbings with different loads were defined for this study. Group 1 consisted of 4K Kevlar webbings loaded to 33% ultimate tensile strength and 6K Vectran webbings loaded to 27% ultimate tensile strength, group 2 consisted of 6K Kevlar webbings loaded to 40% and 43% ultimate tensile strength, and 6K Vectran webbings loaded to 50% ultimate tensile strength, group 3 consisted of 6K Kevlar webbings loaded to 52% ultimate tensile strength and 6K Vectran webbings loaded to 60% ultimate tensile strength, and group 4 consisted of 12.5K Kevlar webbings loaded to 22% ultimate tensile strength, and 12.5K Vectran webbings loaded to 22% ultimate tensile strength. The uniquely designed test facility, hardware, displacement measuring devices, and test data are presented. Test data indicate that immediately after loading all webbings stretch an inch or more, however as time increases displacement values significantly decrease to fall within a range of several hundredth of an inch over the remainder of test period. Webbings in group 1 exhibit near constant displacements and strains over a 17-month period. Data acquisition was suspended after the 17th month, however webbings continue to sustain load without any local webbing damage as of the 21st month of testing. Webbings in group 2 exhibit a combination of initial constant displacement and subsequent increases in displacement rates over a 16-month period. Webbings in group 3 exhibit steady increases in displacement rates leading to webbing failure over a 3-month period. Five of six webbings experienced local damage and subsequent failure in group 3. Data from group 4 indicates increasing webbing displacements over a 7-month period. All webbings in groups 1, 2, and 4 remain suspended without any local damage as of the writing of this paper. Variations in facility temperatures over test period seem to have had limited effect on long-term webbing displacement data.
NASA Technical Reports Server (NTRS)
Sollner, T. C. L. G.; Brown, E. R.; Goodhue, W. D.; Le, H. Q.
1987-01-01
Recent observations of oscillation frequencies up to 56 GHz in resonant tunneling structures are discussed in relation to calculations by several authors of the ultimate frequency limits of these devices. It is found that calculations relying on the Wentzel-Kramers-Brillouin (WKB) approximation give limits well below the observed oscillation frequencies. Two other techniques for calculating the upper frequency limit were found to give more reasonable results. One method employs the solution of the time-dependent Schroedinger equation obtained by Kundrotas and Dargys (1986); the other uses the energy width of the transmission function for electrons through the double-barrier structure. This last technique is believed to be the most accurate since it is based on general results for the lifetime of any resonant state. It gives frequency limits on the order of 1 THz for two recently fabricated structures. It appears that the primary limitation of the oscillation frequency for double-barrier resonant-tunneling diodes is imposed by intrinsic device circuit parameters and by the transit time of the depletion layer rather than by time delays encountered in the double-barrier region.
Anderton, D L; Bean, L L
1985-05-01
Our analysis of changing birth interval distributions over the course of a fertility transition from natural to controlled fertility has examined three closely related propositions. First, within both natural fertility populations (identified at the aggregate level) and cohorts following the onset of fertility limitation, we hypothesized that substantial groups of women with long birth intervals across the individually specified childbearing careers could be identified. That is, even during periods when fertility behavior at the aggregate level is consistent with a natural fertility regime, birth intervals at all parities are inversely related to completed family size. Our tabular analysis enables us to conclude that birth spacing patterns are parity dependent; there is stability in CEB-parity specific mean and birth interval variance over the entire transition. Our evidence does not suggest that the early group of women limiting and spacing births was marked by infecundity. Secondly, the transition appears to be associated with an increasingly larger proportion of women shifting to the same spacing schedules associated with smaller families in earlier cohorts. Thirdly, variations in birth spacing by age of marriage indicate that changes in birth intervals over time are at least indirectly associated with age of marriage, indicating an additional compositional effect. The evidence we have presented on spacing behavior does not negate the argument that parity-dependent stopping behavior was a powerful factor in the fertility transition. Our data also provide evidence of attempts to truncate childbearing. Specifically, the smaller the completed family size, the longer the ultimate birth interval; and ultimate birth intervals increase across cohorts controlling CEB and parity. But spacing appears to represent an additional strategy of fertility limitation. Thus, it may be necessary to distinguish spacing and stopping behavior if one wishes to clarify behavioral patterns within a population (Edlefsen, 1981; Friedlander et al., 1980; Rodriguez and Hobcraft, 1980). Because fertility transition theories imply increased attempts to limit family sizes, it is important to examine differential behavior within subgroups achieving different family sizes. It is this level of analysis which we have attempted to achieve in utilizing parity-specific birth intervals controlled by children ever born.(ABSTRACT TRUNCATED AT 400 WORDS)
Data management, archiving, visualization and analysis of space physics data
NASA Technical Reports Server (NTRS)
Russell, C. T.
1995-01-01
A series of programs for the visualization and analysis of space physics data has been developed at UCLA. In the course of those developments, a number of lessons have been learned regarding data management and data archiving, as well as data analysis. The issues now facing those wishing to develop such software, as well as the lessons learned, are reviewed. Modern media have eased many of the earlier problems of the physical volume required to store data, the speed of access, and the permanence of the records. However, the ultimate longevity of these media is still a question of debate. Finally, while software development has become easier, cost is still a limiting factor in developing visualization and analysis software.
Klein Velderman, Mariska; Dusseldorp, Elise; van Nieuwenhuijzen, Maroesjka; Junger, Marianne; Paulussen, Theo G W M; Reijneveld, Sijmen A
2015-02-01
Adverse health-related behaviours (HRBs) have been shown to co-occur in adolescents. Evidence lacks on factors associated with these co-occurring HRBs. The Theory of Triadic Influence (TTI) offers a route to categorize these determinants according to type (social, cultural and intrapersonal) and distance in the causal pathway (ultimate or distal). Our aims were to identify cultural, social and intrapersonal factors associated with co-occurring HRBs and to assess the relative importance of ultimate and distal factors for each cluster of co-occurring HRBs. Respondents concerned a random sample of 898 adolescents aged 12-18 years, stratified by age, sex and educational level of head of household. Data were collected via face-to-face computer-assisted interviewing and internet questionnaires. Analyses were performed for young (12-15 years) and late (16-18 years) adolescents regarding two and three clusters of HRB, respectively. For each cluster of HRBs (e.g. smoking, delinquency), associated factors were found. These accounted for 27 to 57% of the total variance per cluster. Factors came in particular from the intrapersonal stream of the TTI at the ultimate level and the social stream at the distal level. Associations were strongest for parenting practices, risk behaviours of friends and parents and self-control. Results of this study confirm that it is possible to identify a selection of cultural, social and intrapersonal factors associated with co-occurring HRBs among adolescents. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.
Evaluation of Quality Assessment Protocols for High Throughput Genome Resequencing Data
Chiara, Matteo; Pavesi, Giulio
2017-01-01
Large-scale initiatives aiming to recover the complete sequence of thousands of human genomes are currently being undertaken worldwide, concurring to the generation of a comprehensive catalog of human genetic variation. The ultimate and most ambitious goal of human population scale genomics is the characterization of the so-called human “variome,” through the identification of causal mutations or haplotypes. Several research institutions worldwide currently use genotyping assays based on Next-Generation Sequencing (NGS) for diagnostics and clinical screenings, and the widespread application of such technologies promises major revolutions in medical science. Bioinformatic analysis of human resequencing data is one of the main factors limiting the effectiveness and general applicability of NGS for clinical studies. The requirement for multiple tools, to be combined in dedicated protocols in order to accommodate different types of data (gene panels, exomes, or whole genomes) and the high variability of the data makes difficult the establishment of a ultimate strategy of general use. While there already exist several studies comparing sensitivity and accuracy of bioinformatic pipelines for the identification of single nucleotide variants from resequencing data, little is known about the impact of quality assessment and reads pre-processing strategies. In this work we discuss major strengths and limitations of the various genome resequencing protocols are currently used in molecular diagnostics and for the discovery of novel disease-causing mutations. By taking advantage of publicly available data we devise and suggest a series of best practices for the pre-processing of the data that consistently improve the outcome of genotyping with minimal impacts on computational costs. PMID:28736571
Kohli, Erol; Buller, Allison
2013-02-01
US consumers spend more than $20 billion/year on over-the-counter (OTC) drugs. Although generic and brand name OTC drugs share the same active ingredients and undergo the same rigorous Food and Drug Administration approval process, brand name formulations continue to lead the OTC drug market with a higher market share. There is a limited amount of publicly available information regarding consumer perceptions and awareness about generic and brand name OTC drugs. The main objective of this research was to understand what factors influence US consumers to purchase generic versus brand name OTC drugs. The researchers used a 20-question, self-administered, multiple-choice survey to collect data on the factors influencing consumers' preferences for generic versus brand name OTC drugs. Results revealed that the single most influential factor for participants when purchasing OTC drugs was lower cost. Although economic factors play an important role in influencing consumers to choose generic formulations, a variety of other factors including advertisements, duration of the OTC effectiveness, severity of sickness, preferable form of OTC medication, safety of the OTC, relief of multiple symptoms, and preferred company will persuade others to pay more for brand name drugs. Ultimately, increased awareness and use of generic OTC drugs may result in substantial cost savings for consumers.
Human factors of flight-deck checklists: The normal checklist
NASA Technical Reports Server (NTRS)
Degani, Asaf; Wiener, Earl L.
1991-01-01
Although the aircraft checklist has long been regarded as the foundation of pilot standardization and cockpit safety, it has escaped the scrutiny of the human factors profession. The improper use, or the non-use, of the normal checklist by flight crews is often cited as the probable cause or at least a contributing factor to aircraft accidents. An attempt is made to analyze the normal checklist, its functions, format, design, length, usage, and the limitations of the humans who must interact with it. The development of the checklist from the certification of a new model to its delivery and use by the customer are discussed. The influence of the government, particularly the FAA Principle Operations Inspector, the manufacturer's philosophy, the airline's culture, and the end user, the pilot, influence the ultimate design and usage of this device. The effects of airline mergers and acquisitions on checklist usage and design are noted. In addition, the interaction between production pressures and checklist usage and checklist management are addressed. Finally, a list of design guidelines for normal checklists is provided.
Analog phase lock between two lasers at LISA power levels
NASA Astrophysics Data System (ADS)
Diekmann, Christian; Steier, Frank; Sheard, Benjamin; Heinzel, Gerhard; Danzmann, Karsten
2009-03-01
This paper presents the implementation of an analog optical phase-locked-loop with an offset frequency of about 20MHz between two lasers, where the detected light powers were of the order of 31 pW and 200 μW. The goal of this setup was the design and characterization of a photodiode transimpedance amplifier for application in LISA. By application of a transimpedance amplifier designed to have low noise and low power consumption, the phase noise between the two lasers was a factor of two above the shot noise limit down to 60mHz. The achievable phase sensitivity depends ultimately on the available power of the highly attenuated master laser and on the input current noise of the transimpedance amplifier of the photodetector. The limiting noise source below 60mHz was the analog phase measurement system that was used in this experiment. A digital phase measurement system that is currently under development at the AEI will be used in the near future. Its application should improve the sensitivity.
Ideas for future large single dish radio telescopes
NASA Astrophysics Data System (ADS)
Kärcher, Hans J.; Baars, Jacob W. M.
2014-07-01
The existing large single dish radio telescopes of the 100m class (Effelsberg, Green Bank) were built in the 1970s and 1990s. With some active optics they work now down to 3 millimeter wavelength where the atmospheric quality of the site is also a limiting factor. Other smaller single dish telescopes (50m LMT Mexico, 30m IRAM Spain) are located higher and reach sub-millimeter quality, and the much smaller 12m antennas of the ALMA array reach at a very high site the Terahertz region. They use advanced technologies as carbon fiber structures and flexible body control. We review natural limits to telescope design and use the examples of a number of telescopes for an overview of the available state-of-the-art in design, engineering and technologies. Without considering the scientific justification we then offer suggestions to realize ultimate performance of huge single dish telescopes (up to 160m). We provide an outlook on design options, technological frontiers and cost estimates.
Understanding chemically processed solar cells based on quantum dots
NASA Astrophysics Data System (ADS)
Malgras, Victor; Nattestad, Andrew; Kim, Jung Ho; Dou, Shi Xue; Yamauchi, Yusuke
2017-12-01
Photovoltaic energy conversion is one of the best alternatives to fossil fuel combustion. Petroleum resources are now close to depletion and their combustion is known to be responsible for the release of a considerable amount of greenhouse gases and carcinogenic airborne particles. Novel third-generation solar cells include a vast range of device designs and materials aiming to overcome the factors limiting the current technologies. Among them, quantum dot-based devices showed promising potential both as sensitizers and as colloidal nanoparticle films. A good example is the p-type PbS colloidal quantum dots (CQDs) forming a heterojunction with a n-type wide-band-gap semiconductor such as TiO2 or ZnO. The confinement in these nanostructures is also expected to result in marginal mechanisms, such as the collection of hot carriers and generation of multiple excitons, which would increase the theoretical conversion efficiency limit. Ultimately, this technology could also lead to the assembly of a tandem-type cell with CQD films absorbing in different regions of the solar spectrum.
Comparing in situ removal strategies for improving styrene bioproduction.
McKenna, Rebekah; Moya, Luis; McDaniel, Matthew; Nielsen, David R
2015-01-01
As an important conventional monomer compound, the biological production of styrene carries significant promise with respect to creating novel sustainable materials. Since end-product toxicity presently limits styrene production by previously engineered Escherichia coli, in situ product removal by both solvent extraction and gas stripping were explored as process-based strategies for circumventing its inhibitory effects. In solvent extraction, the addition of bis(2-ethylhexyl)phthalate offered the greatest productivity enhancement, allowing net volumetric production of 836 ± 64 mg/L to be reached, representing a 320 % improvement over single-phase cultures. Gas stripping rates, meanwhile, were controlled by rates of bioreactor agitation and, to a greater extent, aeration. A periodic gas stripping protocol ultimately enabled up to 561 ± 15 mg/L styrene to be attained. Lastly, by relieving the effects of styrene toxicity, new insight was gained regarding subsequent factors limiting its biosynthesis in E. coli and strategies for future strain improvement are discussed.
Understanding chemically processed solar cells based on quantum dots.
Malgras, Victor; Nattestad, Andrew; Kim, Jung Ho; Dou, Shi Xue; Yamauchi, Yusuke
2017-01-01
Photovoltaic energy conversion is one of the best alternatives to fossil fuel combustion. Petroleum resources are now close to depletion and their combustion is known to be responsible for the release of a considerable amount of greenhouse gases and carcinogenic airborne particles. Novel third-generation solar cells include a vast range of device designs and materials aiming to overcome the factors limiting the current technologies. Among them, quantum dot-based devices showed promising potential both as sensitizers and as colloidal nanoparticle films. A good example is the p-type PbS colloidal quantum dots (CQDs) forming a heterojunction with a n-type wide-band-gap semiconductor such as TiO 2 or ZnO. The confinement in these nanostructures is also expected to result in marginal mechanisms, such as the collection of hot carriers and generation of multiple excitons, which would increase the theoretical conversion efficiency limit. Ultimately, this technology could also lead to the assembly of a tandem-type cell with CQD films absorbing in different regions of the solar spectrum.
LASERS: Ultimate energy parameters of the radiation emitted from neodymium-glass laser systems
NASA Astrophysics Data System (ADS)
Eshmemet'eva, E. V.; Korolev, V. I.; Mesnyankin, E. P.; Serebryakov, V. A.; Shashkin, V. V.; Yashin, V. E.
1992-09-01
An experimental investigation was made of the energy conversion efficiency and of the effects of stimulated Brillouin scattering and of optical breakdown, limiting the maximum energy density obtained from several phosphate and silicate neodymium glasses when the duration of the output pulses was 50-150 ns. The experimental results were used to develop a numerical model for calculation of the gain allowing for these processes. A design was developed for an amplifier with ultimate radiation characteristics.
NASA Technical Reports Server (NTRS)
Buggele, A. E.
1973-01-01
The complex problem why large space simulation chambers do not realize the true ultimate vacuum was investigated. Some contaminating factors affecting diffusion pump performance have been identified and some advances in vacuum/distillation/fractionation technology have been achieved which resulted in a two decade or more lower ultimate pressure. Data are presented to show the overall or individual contaminating effect of commonly used phthalate ester plasticizers of 390 to 530 molecular weight on diffusion pump performance. Methods for removing contaminants from diffusion pump silicone oil during operation and reclaiming contaminated oil by high vacuum molecular distillation are described.
Launch and Assembly Reliability Analysis for Human Space Exploration Missions
NASA Technical Reports Server (NTRS)
Cates, Grant; Gelito, Justin; Stromgren, Chel; Cirillo, William; Goodliff, Kandyce
2012-01-01
NASA's future human space exploration strategy includes single and multi-launch missions to various destinations including cis-lunar space, near Earth objects such as asteroids, and ultimately Mars. Each campaign is being defined by Design Reference Missions (DRMs). Many of these missions are complex, requiring multiple launches and assembly of vehicles in orbit. Certain missions also have constrained departure windows to the destination. These factors raise concerns regarding the reliability of launching and assembling all required elements in time to support planned departure. This paper describes an integrated methodology for analyzing launch and assembly reliability in any single DRM or set of DRMs starting with flight hardware manufacturing and ending with final departure to the destination. A discrete event simulation is built for each DRM that includes the pertinent risk factors including, but not limited to: manufacturing completion; ground transportation; ground processing; launch countdown; ascent; rendezvous and docking, assembly, and orbital operations leading up to trans-destination-injection. Each reliability factor can be selectively activated or deactivated so that the most critical risk factors can be identified. This enables NASA to prioritize mitigation actions so as to improve mission success.
Code of Federal Regulations, 2011 CFR
2011-04-01
... determine the identity of the ultimate or present day beneficiaries of judgments. Such research shall be... encouraged to submit pertinent data. All pertinent data, including cultural, political and historical...
Code of Federal Regulations, 2010 CFR
2010-04-01
... determine the identity of the ultimate or present day beneficiaries of judgments. Such research shall be... encouraged to submit pertinent data. All pertinent data, including cultural, political and historical...
The Environment-Immune Route to Chronic Disease
Specific environmental factors including chemicals, drugs, microbes and both physical and psychological factors can affect the immune system producing dysfunction and, ultimately, an increased risk ofchronic disease. Several different types of immune alterations can result from e...
Is brood parasitism related to host nestling diet and nutrition?
Zachary S. Ladin; Vincent D' Amico; Deb P. Jaisi; W. Gregory Shriver
2015-01-01
Food and nutrient limitation can have negative effects on survival, fecundity, and lifetime fitness of individuals, which can ultimately limit populations. Changes in trophic dynamics and diet patterns, affected by anthropogenic environmental and landscape change, are poorly understood yet may play an important role in population regulation. We determined diets of Wood...
15 CFR 740.3 - Shipments of limited value (LVS).
Code of Federal Regulations, 2012 CFR
2012-01-01
... included in the same order and controlled under the same ECCN entry on the CCL does not exceed the amount... the same ultimate or intermediate consignee of commodities classified under a single ECCN may not exceed 12 times the LVS value limit for that ECCN; however, there is no restriction on the number of...
15 CFR 740.3 - Shipments of limited value (LVS).
Code of Federal Regulations, 2011 CFR
2011-01-01
... included in the same order and controlled under the same ECCN entry on the CCL does not exceed the amount... the same ultimate or intermediate consignee of commodities classified under a single ECCN may not exceed 12 times the LVS value limit for that ECCN; however, there is no restriction on the number of...
15 CFR 740.3 - Shipments of limited value (LVS).
Code of Federal Regulations, 2014 CFR
2014-01-01
... included in the same order and controlled under the same ECCN entry on the CCL does not exceed the amount... the same ultimate or intermediate consignee of commodities classified under a single ECCN may not exceed 12 times the LVS value limit for that ECCN; however, there is no restriction on the number of...
15 CFR 740.3 - Shipments of limited value (LVS).
Code of Federal Regulations, 2013 CFR
2013-01-01
... included in the same order and controlled under the same ECCN entry on the CCL does not exceed the amount... the same ultimate or intermediate consignee of commodities classified under a single ECCN may not exceed 12 times the LVS value limit for that ECCN; however, there is no restriction on the number of...
Autonomy in Second Language Phonology: Choice vs. Limits
ERIC Educational Resources Information Center
Moyer, Alene
2017-01-01
Learning a new sound system poses challenges of a social, psychological, and cognitive nature, but the learner's decisions are key to ultimate attainment. This presentation focuses on two essential concepts: CHOICE, or how one wants to sound in the target language; and LIMITS, or various challenges to one's goals vis-a-vis accent. Qualitative and…
High resolution imaging at Palomar
NASA Technical Reports Server (NTRS)
Kulkarni, Shrinivas R.
1992-01-01
For the last two years we have embarked on a program of understanding the ultimate limits of ground-based optical imaging. We have designed and fabricated a camera specifically for high resolution imaging. This camera has now been pressed into service at the prime focus of the Hale 5 m telescope. We have concentrated on two techniques: the Non-Redundant Masking (NRM) and Weigelt's Fully Filled Aperture (FFA) method. The former is the optical analog of radio interferometry and the latter is a higher order extension of the Labeyrie autocorrelation method. As in radio Very Long Baseline Interferometry (VLBI), both these techniques essentially measure the closure phase and, hence, true image construction is possible. We have successfully imaged binary stars and asteroids with angular resolution approaching the diffraction limit of the telescope and image quality approaching that of a typical radio VLBI map. In addition, we have carried out analytical and simulation studies to determine the ultimate limits of ground-based optical imaging, the limits of space-based interferometric imaging, and investigated the details of imaging tradeoffs of beam combination in optical interferometers.
Context as a Factor in Personal Information Management Systems.
ERIC Educational Resources Information Center
Barreau, Deborah K.
1995-01-01
Examines context as a factor in personal information management systems to suggest how it may influence classification decisions and ultimately retrieval. A study of seven managers is described that explored the factors that influence the way individuals manage electronic documents, and results are compared with an earlier study of physical…
Geologic constraints on the upper limits of reserve growth
Stanley, Richard G.
2001-01-01
For many oil and gas fields, estimates of ultimate recovery (the sum of cumulative production plus estimated reserves) tend to increase from one year to the next, and the gain is called reserve growth. Forecasts of reserve growth by the U.S. Geological Survey rely on statistical analyses of historical records of oil and gas production and estimated reserves. The preproposal in this Open-File Report suggests that this traditional petroleum–engineering approach to reserve growth might be supplemented, or at least better understood, by using geological data from individual oil and gas fields, 3–D modeling software, and standard volumetric techniques to estimate in–place volumes of oil and gas. Such estimates, in turn, can be used to constrain the upper limits of reserve growth and ultimate recovery from those fields.
Fate of Manuscripts Rejected From the Red Journal
DOE Office of Scientific and Technical Information (OSTI.GOV)
Holliday, Emma B., E-mail: emmaholliday@gmail.com; Yang, George; Jagsi, Reshma
Purpose: To evaluate characteristics associated with higher rates of acceptance for original manuscripts submitted for publication to the International Journal of Radiation Oncology • Biology • Physics (IJROBP) and describe the fate of rejected manuscripts. Methods and Materials: Manuscripts submitted to the IJROBP from May 1, 2010, to August 31, 2010, and May 1, 2012, to August 31, 2012, were evaluated for author demographics and acceptance status. A PubMed search was performed for each IJROBP-rejected manuscript to ascertain whether the manuscript was ultimately published elsewhere. The Impact Factor of the accepting journal and the number of citations of the publishedmore » manuscript were also collected. Results: Of the 500 included manuscripts, 172 (34.4%) were accepted and 328 (65.6%) were rejected. There was no significant difference in acceptance rates according to gender or degree of the submitting author, but there were significant differences seen based on the submitting author's country, rank, and h-index. On multivariate analysis, earlier year submitted (P<.0001) and higher author h-index (P=.006) remained significantly associated with acceptance into the IJROBP. Two hundred thirty-five IJROBP-rejected manuscripts (71.7%) were ultimately published in a PubMed-listed journal as of July 2014. There were no significant differences in any submitting author characteristics. Journals accepting IJROBP-rejected manuscripts had a lower median [interquartile range] 2013 impact factor compared with the IJROBP (2.45 [1.53-3.71] vs 4.176). The IJROBP-rejected manuscripts ultimately published elsewhere had a lower median [interquartile range] number of citations (1 [0-4] vs 6 [2-11]; P<.001), which persisted on multivariate analysis. Conclusions: The acceptance rate for manuscripts submitted to the IJROBP is approximately one-third, and approximately 70% of rejected manuscripts are ultimately published in other PubMed-listed journals, but these ultimate-destination journals usually have a lower impact factor, leading to fewer citations and overall visibility.« less
Martos, Alexander J; Wilson, Patrick A; Gordon, Allegra R; Lightfoot, Marguerita; Meyer, Ilan H
2018-05-07
Lesbian, gay, and bisexual (LGB) peoples' healthcare preferences are often developed in response to social and institutional factors that can ultimately deter them from care. Prior qualitative explorations of LGB healthcare preferences have been limited in their ability to identify and compare patterns across age cohort, gender, and race/ethnicity. The current study examines qualitative data from 186 modified Life Story Interviews with three age cohorts of LGB people from New York City, NY, San Francisco, CA, Tucson, AZ, and Austin, TX to understand the factors influencing LGB people's healthcare preferences. Data are analyzed using a directed content analysis approach. Five key themes emerged regarding influences on healthcare preferences: Stigma, provider expertise, identity, service type, and access. Findings suggest that healthcare preferences among LGB people are both complex and closely linked to social changes over time. Healthcare preferences among LGB people are both complex and closely linked to social changes over time. Copyright © 2018 Elsevier Ltd. All rights reserved.
Removal of Long-Lived Radon Daughters by Electropolishing Thin Layers of Stainless Steel
NASA Astrophysics Data System (ADS)
White, James; Schnee, Richard; Bunker, Raymond; Bowles, Michael; Cushman, Priscilla; Epland, Matthew; Pepin, Mark; Guiseppe, Vince
2012-10-01
Long-lived alpha and beta emitters in the Radon decay chain on detector surfaces may be limiting background in many experiments attempting to detect dark matter or neutrinoless double beta decay. To screen detector surfaces for this radioactive contamination, a low-radiation, multi-wire proportional chamber (the BetaCage) is under construction. Removal of Pb-210 implanted on its 25-micron stainless steel wires without causing significant variation in the diameter of the wires is critical to the BetaCage's ultimate sensitivity. An apparatus to perform electropolishing trials to remove roughly a micron of material has been assembled. These trials have shown promising results. Stainless steel square samples implanted with Pb-210 have shown counts with a reduction factor greater than 10 after electropolishing according to gamma assay. Furthermore, alpha counting has produced similar results, with a reduction factor greater than 100. Lastly, the diameters of wires after electropolishing have remained sufficiently uniform, with reduction in thickness consistent with expectations.
Are empathy and concern psychologically distinct?
Jordan, Matthew R; Amir, Dorsa; Bloom, Paul
2016-12-01
Researchers have long been interested in the relationship between feeling what you believe others feel-often described as empathy-and caring about the welfare of others-often described as compassion or concern. Many propose that empathy is a prerequisite for concern and is therefore the ultimate motivator of prosocial actions. To assess this hypothesis, the authors developed the Empathy Index, which consists of 2 novel scales, and explored their relationship to a measure of concern as well as to measures of cooperative and altruistic behavior. A series of factor analyses reveal that empathy and concern consistently load on different factors. Furthermore, they show that empathy and concern motivate different behaviors: concern for others is a uniquely positive predictor of prosocial action whereas empathy is either not predictive or negatively predictive of prosocial actions. Together these studies suggest that empathy and concern are psychologically distinct and empathy plays a more limited role in our moral lives than many believe. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Shepard, Jaclyn A.; Stevans, Alyson C.; Holland, Samantha; Wang, Christine E.; Shikanov, Ariella; Shea, Lonnie D.
2012-01-01
Hydrogels capable of gene delivery provide a combinatorial approach for nerve regeneration, with the hydrogel supporting neurite outgrowth and gene delivery inducing the expression of inductive factors. This report investigates the design of hydrogels that balance the requirements for supporting neurite growth with those requirements for promoting gene delivery. Enzymatically-degradable PEG hydrogels encapsulating dorsal root ganglia explants, fibroblasts, and lipoplexes encoding nerve growth factor were gelled within channels that can physically guide neurite outgrowth. Transfection of fibroblasts increased with increasing concentration of Arg-Gly-Asp (RGD) cell adhesion sites and decreasing PEG content. The neurite length increased with increasing RGD concentration within 10% PEG hydrogels, yet was maximal within 7.5% PEG hydrogels at intermediate RGD levels. Delivering lipoplexes within the gel produced longer neurites than culture in NGF-supplemented media or co-culture with cells exposed to DNA prior to encapsulation. Hydrogels designed to support neurite outgrowth and deliver gene therapy vectors locally may ultimately be employed to address multiple barriers that limit regeneration. PMID:22038654
Analysis of Factors Influencing Measurement Accuracy of Al Alloy Tensile Test Results
NASA Astrophysics Data System (ADS)
Podgornik, Bojan; Žužek, Borut; Sedlaček, Marko; Kevorkijan, Varužan; Hostej, Boris
2016-02-01
In order to properly use materials in design, a complete understanding of and information on their mechanical properties, such as yield and ultimate tensile strength must be obtained. Furthermore, as the design of automotive parts is constantly pushed toward higher limits, excessive measuring uncertainty can lead to unexpected premature failure of the component, thus requiring reliable determination of material properties with low uncertainty. The aim of the present work was to evaluate the effect of different metrology factors, including the number of tested samples, specimens machining and surface quality, specimens input diameter, type of testing and human error on the tensile test results and measurement uncertainty when performed on 2xxx series Al alloy. Results show that the most significant contribution to measurement uncertainty comes from the number of samples tested, which can even exceed 1 %. Furthermore, moving from experimental laboratory conditions to very intense industrial environment further amplifies measurement uncertainty, where even if using automated systems human error cannot be neglected.
Current research on pharmacologic and regenerative therapies for osteoarthritis
Zhang, Wei; Ouyang, Hongwei; Dass, Crispin R; Xu, Jiake
2016-01-01
Osteoarthritis (OA) is a degenerative joint disorder commonly encountered in clinical practice, and is the leading cause of disability in elderly people. Due to the poor self-healing capacity of articular cartilage and lack of specific diagnostic biomarkers, OA is a challenging disease with limited treatment options. Traditional pharmacologic therapies such as acetaminophen, non-steroidal anti-inflammatory drugs, and opioids are effective in relieving pain but are incapable of reversing cartilage damage and are frequently associated with adverse events. Current research focuses on the development of new OA drugs (such as sprifermin/recombinant human fibroblast growth factor-18, tanezumab/monoclonal antibody against β-nerve growth factor), which aims for more effectiveness and less incidence of adverse effects than the traditional ones. Furthermore, regenerative therapies (such as autologous chondrocyte implantation (ACI), new generation of matrix-induced ACI, cell-free scaffolds, induced pluripotent stem cells (iPS cells or iPSCs), and endogenous cell homing) are also emerging as promising alternatives as they have potential to enhance cartilage repair, and ultimately restore healthy tissue. However, despite currently available therapies and research advances, there remain unmet medical needs in the treatment of OA. This review highlights current research progress on pharmacologic and regenerative therapies for OA including key advances and potential limitations. PMID:26962464
Kikis, Elise A
2017-08-22
Aging is a risk factor for a number of "age-related diseases", including Alzheimer's disease (AD). AD affects more than a third of all people over the age of 85, and is the leading cause of dementia worldwide. Symptoms include forgetfulness, memory loss, and cognitive decline, ultimately resulting in the need for full-time care. While there is no cure for AD, pharmacological approaches to alleviate symptoms and target underlying causes of the disease have been developed, albeit with limited success. This review presents the age-related, genetic, and environmental risk factors for AD and proposes a hypothesis for the mechanistic link between genetics and the environment. In short, much is known about the genetics of early-onset familial AD (EO-FAD) and the central role played by the Aβ peptide and protein misfolding, but late-onset AD (LOAD) is not thought to have direct genetic causes. Nonetheless, genetic risk factors such as isoforms of the protein ApoE have been identified. Additional findings suggest that air pollution caused by the combustion of fossil fuels may be an important environmental risk factor for AD. A hypothesis suggesting that poor air quality might act by disrupting protein folding homeostasis (proteostasis) is presented.
Single-Layer Limit of Metallic Indium Overlayers on Si(111).
Park, Jae Whan; Kang, Myung Ho
2016-09-09
Density-functional calculations are used to identify one-atom-thick metallic In phases grown on the Si(111) surface, which have long been sought in quest of the ultimate two-dimensional (2D) limit of metallic properties. We predict two metastable single-layer In phases, one sqrt[7]×sqrt[3] phase with a coverage of 1.4 monolayer (ML; here 1 ML refers to one In atom per top Si atom) and the other sqrt[7]×sqrt[7] phase with 1.43 ML, which indeed agree with experimental evidences. Both phases reveal quasi-1D arrangements of protruded In atoms, leading to 2D-metallic but anisotropic band structures and Fermi surfaces. This directional feature contrasts with the free-electron-like In-overlayer properties that are known to persist up to the double-layer thickness, implying that the ultimate 2D limit of In overlayers may have been achieved in previous studies of double-layer In phases.
Excess glycogen does not resolve high ultimate pH of oxidative muscle.
England, Eric M; Matarneh, Sulaiman K; Oliver, Emily M; Apaoblaza, Ariel; Scheffler, Tracy L; Shi, Hao; Gerrard, David E
2016-04-01
Skeletal muscle glycogen content can impact the extent of postmortem pH decline. Compared to glycolytic muscles, oxidative muscles contain lower glycogen levels antemortem which may contribute to the higher ultimate pH. In an effort to explore further the participation of glycogen in postmortem metabolism, we postulated that increasing the availability of glycogen would drive additional pH decline in oxidative muscles to equivalent pH values similar to the ultimate pH of glycolytic muscles. Glycolysis and pH declines were compared in porcine longissimus lumborum (glycolytic) and masseter (oxidative) muscles using an in vitro system in the presence of excess glycogen. The ultimate pH of the system containing longissimus lumborum reached a value similar to that observed in intact muscle. The pH decline of the system containing masseter samples stopped prematurely resulting in a higher ultimate pH which was similar to that of intact masseter muscle. To investigate further, we titrated powdered longissimus lumborum and masseter samples in the reaction buffer. As the percentage of glycolytic sample increased, the ultimate pH decreased. These data show that oxidative muscle produces meat with a high ultimate pH regardless of glycogen content and suggest that inherent muscle factors associated with glycolytic muscle control the extent of pH decline in pig muscles. Copyright © 2015 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Abdala, Z. M.; Powell, K.; Cronin, D.; Chappell, D.
2016-02-01
A comparative gene expression analysis of iron-limited cultures of Chaetoceros socialis and Pseudo-nitzschia arenysensisusing newly developed iron assays Zuzanna M. Abdala, Kimberly Powell, Dylan P. Cronin, P. Dreux Chappell Diatoms, accounting for about 40% of the primary production in marine ecosystems, play a vital role in the dynamics of marine systems. Iron availability is understood to be a driving factor controlling productivity of many marine phytoplankton, including diatoms, as it functions as a cofactor for many proteins including several involved with photosynthetic processes. Previous work examining transcriptomes of diatoms of the Thalassiosira genus grown in controlled laboratory settings has identified genes whose expression can be used as sensitive markers of iron status. Data mining publically available diatom transcriptome data for these genes enables development of additional iron status assays for environmentally-relevant diatoms. For the present study, gene expression analysis of iron-limited laboratory cultures of Chaetoceros socialis and Pseudo-nitzschia arenysensis grown in continuous light was done using quantitative reverse transcriptase polymerase chain reaction (qRT-PCR). C. socialis and P. arenysensis serve as comparative models for analyzing gene expression in iron limitation in different ecological community assemblages. These data may ultimately assist to illuminate the function of iron in photosynthetic activity in diatoms.
Pesticides in ground water: Do atrazine metabolites matter?
Liu, S.; Yen, S.T.; Kolpin, D.W.
1996-01-01
Atrazine and atrazine-residue (atrazine + two metabolites - deethylatrazine and deisopropylatrazine) concentrations were examined to determine if consideration of these atrazine metabolites substantially adds to our understanding of the distribution of this pesticide in groundwater of the midcontinental United States. The mean of atrazine.residue concentrations was 53 percent greater than that of atrazine alone for those observations above the detection limit (> 0.05 μg/l). Furthermore, a censored regression analysis using atrazine-residue concentrations revealed significant factors not identified when only atrazine concentrations were used. Thus, knowledge of concentrations of these atrazine metabolites is required to obtain a true estimation of risk of using these aquifers as sources for drinking water, and such knowledge also provides information that ultimately may be important for future management policies designed to reduce atrazine concentrations in ground water.
Test load verification through strain data analysis
NASA Technical Reports Server (NTRS)
Verderaime, V.; Harrington, F.
1995-01-01
A traditional binding acceptance criterion on polycrystalline structures is the experimental verification of the ultimate factor of safety. At fracture, the induced strain is inelastic and about an order-of-magnitude greater than designed for maximum expected operational limit. At this extreme strained condition, the structure may rotate and displace at the applied verification load such as to unknowingly distort the load transfer into the static test article. Test may result in erroneously accepting a submarginal design or rejecting a reliable one. A technique was developed to identify, monitor, and assess the load transmission error through two back-to-back surface-measured strain data. The technique is programmed for expediency and convenience. Though the method was developed to support affordable aerostructures, the method is also applicable for most high-performance air and surface transportation structural systems.
The dynamics of community and NGO partnership: primary health care experiences in rural Mali.
Solomon, Yodit; Ballif-Spanvill, Bonnie; Ward, Carol; Fuhriman, Addie; Widdision-Jones, Kacey
2008-12-01
Utilizing ethnographic research methods, this case study examines the experiences of an NGO-sponsored health care program in rural Mali. The findings indicate that while, in principle, the organization operates from an alternative development base, it has been unable to decentralize the decision-making process and facilitate community dialogue and participation. Numerous problems resulted, including superficial forms of local participation, lack of community ownership, non-remuneration of health workers and midwives, inadequate training, and ultimately, limited program gains. The analyses highlight the complexity and dynamic nature of health program implementation in a developing context, and suggest several factors important to project success. These include drawing on diverse local perspectives, promoting broad-based participation, and providing culturally appropriate ways to include all community members, particularly women.
Ribisl, Kurt M; Leeman, Jennifer; Glasser, Allison M
2014-06-01
The relatively high cost of delivering many public health interventions limits their potential for broad public impact by reducing their likelihood of adoption and maintenance over time. Practitioners identify cost as the primary factor for which interventions they select to implement, but researchers rarely disseminate cost information or consider its importance when developing new interventions. A new approach is proposed whereby intervention developers assess what individuals and agencies adopting their interventions are willing to pay and then design interventions that are responsive to this price range. The ultimate goal is to develop effective and affordable interventions, called lean interventions, which are widely adopted and have greater public health impact. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Checchin, Mattia
Superconducting niobium accelerating cavities are devices operating in radio-frequency and able to accelerate charged particles up to energy of tera-electron-volts. Such accelerating structures are though limited in terms of quality factor and accelerating gradient, that translates--in some cases--in higher capital costs of construction and operation of superconducting rf accelerators. Looking forward for a new generation of more affordable accelerators, the physical description of limiting mechanisms in superconducting microwave resonators is discussed. In particular, the physics behind the dissipation introduced by vortices in the superconductor, the ultimate quench limitations and the quality factor degradation mechanism after a quench are described inmore » detail. One of the limiting factor of the quality factor is the dissipation introduced by trapped magnetic flux vortices. The radio-frequency complex response of trapped vortices in superconductors is derived by solving the motion equation for a magnetic flux line, assuming a bi-dimensional and mean free path-dependent Lorentzian-shaped pinning potential. The resulting surface resistance shows the bell-shaped trend as a function of the mean free path, in agreement with the experimental data observed. Such bell-shaped trend of the surface resistance is described in terms of the interplay of the two limiting regimes identified as pinning and flux flow regimes, for low and large mean free path values respectively. The model predicts that the dissipation regime--pinning- or flux-flow-dominated--can be tuned either by acting on the frequency or on the electron mean free path value. The effect of different configurations of pinning sites and strength on the vortex surface resistance are also discussed. Accelerating cavities are also limited by the quench of the superconductive state, which limits the maximum accelerating gradient achievable. The accelerating field limiting factor is usually associate d to the superheating field, which is intimately correlated to the penetration of magnetic flux vortices in the material. Experimental data for N-doped cavities suggest that uniform Ginzburg-Landau parameter cavities are statistically limited by the lower critical field, in terms of accelerating gradient. By introducing a Ginzburg-Landau parameter profile at the cavity rf surface--dirty layer--the accelerating gradient of superconducting resonators can be enhanced. The description of the physics behind the accelerating gradient enhancement as a consequence of the dirty layer is carried out by solving numerically the Ginzburg-Landau equations for the layered system. The enhancement is showed to be promoted by the higher energy barrier to vortex penetration, and by the enhanced lower critical field. Another serious threat to the quality factor during the cavity operation is the extra dissipation introduced by the quench. Such quality factor degradation mechanism due to the quench, is generated by the trapping of external magnetic flux at quench spot. The purely extrinsic origin of such extra dissipation is proven by the impossibility of decrease the quality factor by quenching in a magnetic field-free environment. Also, a clear relation of the dissipation introduced by quenching to the orientation of the applied magnetic field is observed. The full recover of the quality factor by re-quenching in compensated field is possible when the trapped flux at the quench spot is modest. On the contrary, when the trapped magnetic flux is too large, the quality factor degradation may become irreversible by this technique, likely due to the outward flux migration beyond the normal zone opening during the quench.« less
Factors affecting consumer usage and acceptance of child restraints
DOT National Transportation Integrated Search
1983-09-01
This study was designed to focus on two factors with potential relevance to the child restraint device (CRD) usage problem: CRD design and directions for use; problems of initial users and repeated users were targeted for consideration. Ultimate obje...
Approaching the Ultimate Limits of Communication Efficiency with a Photon-Counting Detector
NASA Technical Reports Server (NTRS)
Erkmen, Baris; Moision, Bruce; Dolinar, Samuel J.; Birnbaum, Kevin M.; Divsalar, Dariush
2012-01-01
Coherent states achieve the Holevo capacity of a pure-loss channel when paired with an optimal measurement, but a physical realization of this measurement is as of yet unknown, and it is also likely to be of high complexity. In this paper, we focus on the photon-counting measurement and study the photon and dimensional efficiencies attainable with modulations over classical- and nonclassical-state alphabets. We first review the state-of-the-art coherent on-off-keying (OOK) with a photoncounting measurement, illustrating its asymptotic inefficiency relative to the Holevo limit. We show that a commonly made Poisson approximation in thermal noise leads to unbounded photon information efficiencies, violating the conjectured Holevo limit. We analyze two binary-modulation architectures that improve upon the dimensional versus photon efficiency tradeoff achievable with conventional OOK. We show that at high photon efficiency these architectures achieve an efficiency tradeoff that differs from the best possible tradeoff--determined by the Holevo capacity--by only a constant factor. The first architecture we analyze is a coherent-state transmitter that relies on feedback from the receiver to control the transmitted energy. The second architecture uses a single-photon number-state source.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-22
... Service; Limited 90-Day Waiver for the Distribution of Anhydrous Ammonia in Agricultural Operations AGENCY... anhydrous ammonia from any distribution point to a local farm retailer or to the ultimate consumer, and from... anhydrous ammonia during the 2010 spring planting season. The Agency has determined that the waiver would...
Exploring Factors Influencing Acceptance and Use of Video Digital Libraries
ERIC Educational Resources Information Center
Ju, Boryung; Albertson, Dan
2018-01-01
Introduction: This study examines the effects of certain key factors on users' intention to ultimately adopt and use video digital libraries for facilitating their information needs. The individual factors identified for this study, based on their given potential to influence use and acceptance of video digital libraries, were categorised for data…
75 FR 69374 - Supplement to Universal Service Reform Mobility Fund
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-12
... ultimate impact of any amount of support would depend upon a variety of factors, including the extent to... be a factor in determining whether those census blocks should be eligible for Mobility Fund support... factors in determining the units in each unserved area may better represent the public benefits of...
ERIC Educational Resources Information Center
Weinberg, Alvin M.
1971-01-01
Argues that perfected technology, not neo-Ludite response, is necessary for solution of world food and resource problems. Although energy supply will ultimately limit available food, reactors can supply sufficient power for 15 billion population. (AL)
Factors Affecting Grammatical and Lexical Complexity of Long-Term L2 Speakers' Oral Proficiency
ERIC Educational Resources Information Center
Lahmann, Cornelia; Steinkrauss, Rasmus; Schmid, Monika S.
2016-01-01
There remains considerable disagreement about which factors drive second language (L2) ultimate attainment. Age of onset (AO) appears to be a robust factor, lending support to theories of maturational constraints on L2 acquisition. The present study is an investigation of factors that influence grammatical and lexical complexity at the stage of L2…
Parsing interindividual drug variability: an emerging role for systems pharmacology
Turner, Richard M; Park, B Kevin; Pirmohamed, Munir
2015-01-01
There is notable interindividual heterogeneity in drug response, affecting both drug efficacy and toxicity, resulting in patient harm and the inefficient utilization of limited healthcare resources. Pharmacogenomics is at the forefront of research to understand interindividual drug response variability, but although many genotype-drug response associations have been identified, translation of pharmacogenomic associations into clinical practice has been hampered by inconsistent findings and inadequate predictive values. These limitations are in part due to the complex interplay between drug-specific, human body and environmental factors influencing drug response and therefore pharmacogenomics, whilst intrinsically necessary, is by itself unlikely to adequately parse drug variability. The emergent, interdisciplinary and rapidly developing field of systems pharmacology, which incorporates but goes beyond pharmacogenomics, holds significant potential to further parse interindividual drug variability. Systems pharmacology broadly encompasses two distinct research efforts, pharmacologically-orientated systems biology and pharmacometrics. Pharmacologically-orientated systems biology utilizes high throughput omics technologies, including next-generation sequencing, transcriptomics and proteomics, to identify factors associated with differential drug response within the different levels of biological organization in the hierarchical human body. Increasingly complex pharmacometric models are being developed that quantitatively integrate factors associated with drug response. Although distinct, these research areas complement one another and continual development can be facilitated by iterating between dynamic experimental and computational findings. Ultimately, quantitative data-derived models of sufficient detail will be required to help realize the goal of precision medicine. WIREs Syst Biol Med 2015, 7:221–241. doi: 10.1002/wsbm.1302 PMID:25950758
Russo, Brendan J; Savolainen, Peter T; Gates, Timothy J; Kay, Jonathan J; Frazier, Sterling
2017-07-04
Although a considerable amount of prior research has investigated the impacts of speed limits on traffic safety and operations, much of this research, and nearly all of the research related to differential speed limits, has been specific to limited access freeways. The unique safety and operational issues on highways without access control create difficulty relating the conclusions from prior freeway-related speed limit research to 2-lane highways, particularly research on differential limits due to passing limitations and subsequent queuing. Therefore, the objective of this study was to assess differences in driver speed selection with respect to the posted speed limit on rural 2-lane highways, with a particular emphasis on the differences between uniform and differential speed limits. Data were collected from nearly 59,000 vehicles across 320 sites in Montana and 4 neighboring states. Differences in mean speeds, 85th percentile speeds, and the standard deviation in speeds for free-flowing vehicles were examined across these sites using ordinary least squares regression models. Ultimately, the results of the analysis show that the mean speed, 85th percentile speed, and variability in travel speeds for free-flowing vehicles on 2-lane highways are generally lower at locations with uniform 65 mph speed limits, compared to locations with differential limits of 70 mph for cars and 60 mph for trucks. In addition to posted speed limits, several site characteristics were shown to influence speed selection including shoulder widths, frequency of horizontal curves, percentage of the segment that included no passing zones, and hourly volumes. Differences in vehicle speed characteristics were also observed between states, indicating that speed selection may also be influenced by local factors, such as driver population or enforcement.
Farr, Deeonna E; Brandt, Heather M; Comer, Kimberly D; Jackson, Dawnyéa D; Pandya, Kinjal; Friedman, Daniela B; Ureda, John R; Williams, Deloris G; Scott, Dolores B; Green, Wanda; Hébert, James R
2015-09-01
Increasing the participation of Blacks in cancer research is a vital component of a strategy to reduce racial inequities in cancer burden. Community-based participatory research (CBPR) is especially well-suited to advancing our knowledge of factors that influence research participation to ultimately address cancer-related health inequities. A paucity of literature focuses on the role of structural factors limiting participation in cancer research. As part of a larger CBPR project, we used survey data from a statewide cancer needs assessment of a Black faith community to examine the influence of structural factors on attitudes toward research and the contributions of both structural and attitudinal factors on whether individuals participate in research. Regression analyses and non-parametric statistics were conducted on data from 727 adult survey respondents. Structural factors, such as having health insurance coverage, experiencing discrimination during health care encounters, and locale, predicted belief in the benefits, but not the risks, of research participation. Positive attitudes toward research predicted intention to participate in cancer research. Significant differences in structural and attitudinal factors were found between cancer research participants and non-participants; however, directionality is confounded by the cross-sectional survey design and causality cannot be determined. This study points to complex interplay of structural and attitudinal factors on research participation as well as need for additional quantitative examinations of the various types of factors that influence research participation in Black communities.
Individual and social determinants of multiple chronic disease behavioral risk factors among youth.
Alamian, Arsham; Paradis, Gilles
2012-03-22
Behavioral risk factors are known to co-occur among youth, and to increase risks of chronic diseases morbidity and mortality later in life. However, little is known about determinants of multiple chronic disease behavioral risk factors, particularly among youth. Previous studies have been cross-sectional and carried out without a sound theoretical framework. Using longitudinal data (n = 1135) from Cycle 4 (2000-2001), Cycle 5 (2002-2003) and Cycle 6 (2004-2005) of the National Longitudinal Survey of Children and Youth, a nationally representative sample of Canadian children who are followed biennially, the present study examines the influence of a set of conceptually-related individual/social distal variables (variables situated at an intermediate distance from behaviors), and individual/social ultimate variables (variables situated at an utmost distance from behaviors) on the rate of occurrence of multiple behavioral risk factors (physical inactivity, sedentary behavior, tobacco smoking, alcohol drinking, and high body mass index) in a sample of children aged 10-11 years at baseline. Multiple behavioral risk factors were assessed using a multiple risk factor score. All statistical analyses were performed using SAS, version 9.1, and SUDAAN, version 9.01. Multivariate longitudinal Poisson models showed that social distal variables including parental/peer smoking and peer drinking (Log-likelihood ratio (LLR) = 187.86, degrees of freedom (DF) = 8, p < .001), as well as individual distal variables including low self-esteem (LLR = 76.94, DF = 4, p < .001) increased the rate of occurrence of multiple behavioral risk factors. Individual ultimate variables including age, sex, and anxiety (LLR = 9.34, DF = 3, p < .05), as well as social ultimate variables including family socioeconomic status, and family structure (LLR = 10.93, DF = 5, p = .05) contributed minimally to the rate of co-occurrence of behavioral risk factors. The results suggest targeting individual/social distal variables in prevention programs of multiple chronic disease behavioral risk factors among youth.
Using synchrotron light to accelerate EUV resist and mask materials learning
NASA Astrophysics Data System (ADS)
Naulleau, Patrick; Anderson, Christopher N.; Baclea-an, Lorie-Mae; Denham, Paul; George, Simi; Goldberg, Kenneth A.; Jones, Gideon; McClinton, Brittany; Miyakawa, Ryan; Mochi, Iacopo; Montgomery, Warren; Rekawa, Seno; Wallow, Tom
2011-03-01
As commercialization of extreme ultraviolet lithography (EUVL) progresses, direct industry activities are being focused on near term concerns. The question of long term extendibility of EUVL, however, remains crucial given the magnitude of the investments yet required to make EUVL a reality. Extendibility questions are best addressed using advanced research tools such as the SEMATECH Berkeley microfield exposure tool (MET) and actinic inspection tool (AIT). Utilizing Lawrence Berkeley National Laboratory's Advanced Light Source facility as the light source, these tools benefit from the unique properties of synchrotron light enabling research at nodes generations ahead of what is possible with commercial tools. The MET for example uses extremely bright undulator radiation to enable a lossless fully programmable coherence illuminator. Using such a system, resolution enhancing illuminations achieving k1 factors of 0.25 can readily be attained. Given the MET numerical aperture of 0.3, this translates to an ultimate resolution capability of 12 nm. Using such methods, the SEMATECH Berkeley MET has demonstrated resolution in resist to 16-nm half pitch and below in an imageable spin-on hard mask. At a half pitch of 16 nm, this material achieves a line-edge roughness of 2 nm with a correlation length of 6 nm. These new results demonstrate that the observed stall in ultimate resolution progress in chemically amplified resists is a materials issue rather than a tool limitation. With a resolution limit of 20-22 nm, the CAR champion from 2008 remains as the highest performing CAR tested to date. To enable continued advanced learning in EUV resists, SEMATECH has initiated a plan to implement a 0.5 NA microfield tool at the Advanced Light Source synchrotron facility. This tool will be capable of printing down to 8-nm half pitch.
Özdemir, Şahin Kaya; Zhu, Jiangang; Yang, Xu; Peng, Bo; Yilmaz, Huzeyfe; He, Lina; Monifi, Faraz; Huang, Steven He; Long, Gui Lu; Yang, Lan
2014-09-16
Optical whispering-gallery-mode resonators (WGMRs) have emerged as promising platforms for label-free detection of nano-objects. The ultimate sensitivity of WGMRs is determined by the strength of the light-matter interaction quantified by quality factor/mode volume, Q/V, and the resolution is determined by Q. To date, to improve sensitivity and precision of detection either WGMRs have been doped with rare-earth ions to compensate losses and increase Q or plasmonic resonances have been exploited for their superior field confinement and lower V. Here, we demonstrate, for the first time to our knowledge, enhanced detection of single-nanoparticle-induced mode splitting in a silica WGMR via Raman gain-assisted loss compensation and WGM Raman microlaser. In particular, the use of the Raman microlaser provides a dopant-free, self-referenced, and self-heterodyned scheme with a detection limit ultimately determined by the thermorefractive noise. Notably, we detected and counted individual nanoparticles with polarizabilities down to 3.82 × 10(-6) μm(3) by monitoring a heterodyne beatnote signal. This level of sensitivity is achieved without exploiting plasmonic effects, external references, or active stabilization and frequency locking. Single nanoparticles are detected one at a time; however, their characterization by size or polarizability requires ensemble measurements and statistical averaging. This dopant-free scheme retains the inherited biocompatibility of silica and could find widespread use for sensing in biological media. The Raman laser and operation band of the sensor can be tailored for the specific sensing environment and the properties of the targeted materials by changing the pump laser wavelength. This scheme also opens the possibility of using intrinsic Raman or parametric gain for loss compensation in other systems where dissipation hinders progress and limits applications.
Exercise starts and ends in the brain.
Kayser, Bengt
2003-10-01
Classically the limit to endurance of exercise is explained in terms of metabolic capacity. Cardio-respiratory capacity and muscle fatigue are thought to set the limit and the majority of studies on factors limiting endurance exercise discuss issues such as maximal oxygen uptake (VO2max), aerobic enzyme capacity, cardiac output, glycogen stores, etc. However, this paradigm does not explain the limitation to endurance exercise with large muscle groups at altitude, when at exhaustion exercise is ended without limb locomotor muscle fatigue and with sub-maximal cardiac output. A simple fact provides a basis for an explanation. Voluntary exercise starts and ends in the brain. It starts with spatial and temporal recruitment of motor units and ends with their de-recruitment. A conscious decision precedes a voluntary effort. The end of effort is again volitional and a forced conscious decision to stop precedes it, but it is unknown what forces the off-switch of recruitment at exhaustion although sensation of exertion certainly plays a role. An alternative model explaining the limitation of exercise endurance thus proposes that the central nervous system integrates input from various sources all related to the exercise and limits the intensity and duration of recruitment of limb skeletal muscle to prevent jeopardizing the integrity of the organism. This model acknowledges the cardio-respiratory and muscle metabolic capacities as prime actors on the performance scene, while crediting the central nervous system for its pivotal role as the ultimate site where exercise starts and ends.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-14
... No. FMCSA-2010-0230] Hours of Service; Limited Exemption for the Distribution of Anhydrous Ammonia in... ammonia from any distribution point to a local farm retailer or to the ultimate consumer, and from a local... anhydrous ammonia during the planting and harvesting seasons, as defined by the States in which the carriers...
Maximum height in a conifer is associated with conflicting requirements for xylem design
Jean-Chrisophe Domec; Barbara Lachenbruch; Frederick Meinzer; David R. Woodruff; Jeffrey M. Warren; Katherine A. McCulloh
2008-01-01
Despite renewed interest in the nature of limitations on maximum tree height, the mechanisms governing ultimate and species-specific height limits are not yet understood, but they likely involve water transport dynamics. Tall trees experience increased risk of xylem embolism from air-seeding because tension in their water column increases with height owing to path-...
Code of Federal Regulations, 2012 CFR
2012-07-01
... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...
Code of Federal Regulations, 2010 CFR
2010-07-01
... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...
Code of Federal Regulations, 2013 CFR
2013-07-01
... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...
Code of Federal Regulations, 2014 CFR
2014-07-01
... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...
Code of Federal Regulations, 2011 CFR
2011-07-01
... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...
Florally rich habitats reduce insect pollination and the reproductive success of isolated plants.
Evans, Tracie M; Cavers, Stephen; Ennos, Richard; Vanbergen, Adam J; Heard, Matthew S
2017-08-01
Landscape heterogeneity in floral communities has the potential to modify pollinator behavior. Pollinator foraging varies with the diversity, abundance, and spatial configuration of floral resources. However, the implications of this variation for pollen transfer and ultimately the reproductive success of insect pollinated plants remains unclear, especially for species which are rare or isolated in the landscape. We used a landscape-scale experiment, coupled with microsatellite genotyping, to explore how the floral richness of habitats affected pollinator behavior and pollination effectiveness. Small arrays of the partially self-compatible plant Californian poppy ( Eschscholzia californica) were introduced across a landscape gradient to simulate rare, spatially isolated populations. The effects on pollinator activity, outcrossing, and plant reproduction were measured. In florally rich habitats, we found reduced pollen movement between plants, leading to fewer long-distance pollination events, lower plant outcrossing, and a higher incidence of pollen limitation. This pattern indicates a potential reduction in per capita pollinator visitation, as suggested by the lower activity densities and richness of pollinators observed within florally rich habitats. In addition, seed production reduced by a factor of 1.8 in plants within florally rich habitats and progeny germination reduced by a factor of 1.2. We show this to be a consequence of self-fertilization within the partially self-compatible plant, E. californica . These findings indicate that locally rare plants are at a competitive disadvantage within florally rich habitats because neighboring plant species disrupt conspecific mating by co-opting pollinators. Ultimately, this Allee effect may play an important role in determining the long-term persistence of rarer plants in the landscape, both in terms of seed production and viability. Community context therefore requires consideration when designing and implementing conservation management for plants which are comparatively rare in the landscape.
Closing the (service) gap: exploring partnerships between Aboriginal and mainstream health services.
Taylor, Kate P; Thompson, Sandra C
2011-08-01
Although effective partnerships between Aboriginal and mainstream health services are critical to improve Aboriginal health outcomes, many factors can cause these partnerships to be tenuous and unproductive. Understanding the elements of best practice for successful partnerships is essential. A literature review was conducted in 2009 using keyword searches of electronic databases. Sourced literature was assessed for relevance regarding the benefits, challenges, lessons learnt and factors contributing to successful Aboriginal and mainstream partnerships. Key themes were collated. Although there is much literature regarding general partnerships generally, few specifically examine Aboriginal and mainstream health service partnerships. Twenty-four sources were reviewed in detail. Benefits include broadening service capacity and improving the cultural security of healthcare. Challenges include the legacy of Australia's colonial history, different approaches to servicing clients and resource limitations. Recommendations for success include workshopping tensions early, building trust and leadership. Although successful partnerships are crucial to optimise Aboriginal health outcomes, failed collaborations risk inflaming sensitive Aboriginal-non-Aboriginal relationships. Factors supporting successful partnerships remind us to develop genuine, trusting relationships that are tangibly linked to the Aboriginal community. Failure to invest in this relational process and push forward with 'business as usual' can ultimately have negative ramifications on client outcomes.
NASA Astrophysics Data System (ADS)
Sinthaworn, S.; Puengpaiboon, U.; Warasetrattana, N.; Wanapaisarn, S.
2018-01-01
Endodontically treated teeth were simulated by finite element analysis in order to estimate ultimate tensile strength of dentin. Structures of the endodontically treated tooth cases are flared root canal, restored with different number of fiber posts {i.e. resin composite core without fiber post (group 1), fiber post No.3 with resin composite core (group 2) and fiber post No.3 accessory 2 fiber posts No.0 with resin composite core (group 3)}. Elastic modulus and Poisson’s ratio of materials were selected from literatures. The models were loaded by the average fracture resistances load of each groups (group 1: 361.80 N, group 2: 559.46 N, group 3: 468.48 N) at 135 degree angulation in respect to the longitudinal axis of the teeth. The stress analysis and experimental confirm that fracture zone is at dentin area. To estimate ultimate tensile strength of dentin, trial and error of ultimate tensile strength were tested to obtain factor of safety (FOS) equal to 1.00. The result reveals that ultimate tensile strength of dentin of group 1, 2, 3 are 38.89, 30.96, 37.19 MPa, respectively.
Gormezano, Linda J; McWilliams, Scott R; Iles, David T; Rockwell, Robert F
2016-01-01
Trade-offs between locomotory costs and foraging gains are key elements in determining constraints on predator-prey interactions. One intriguing example involves polar bears pursuing snow geese on land. As climate change forces polar bears to spend more time ashore, they may need to expend more energy to obtain land-based food. Given that polar bears are inefficient at terrestrial locomotion, any extra energy expended to pursue prey could negatively impact survival. However, polar bears have been regularly observed engaging in long pursuits of geese and other land animals, and the energetic worth of such behaviour has been repeatedly questioned. We use data-driven energetic models to examine how energy expenditures vary across polar bear mass and speed. For the first time, we show that polar bears in the 125-235 kg size range can profitably pursue geese, especially at slower speeds. We caution, however, that heat build-up may be the ultimate limiting factor in terrestrial chases, especially for larger bears, and this limit would be reached more quickly with warmer environmental temperatures.
Gormezano, Linda J.; McWilliams, Scott R.; Iles, David T.; Rockwell, Robert F.
2016-01-01
Trade-offs between locomotory costs and foraging gains are key elements in determining constraints on predator–prey interactions. One intriguing example involves polar bears pursuing snow geese on land. As climate change forces polar bears to spend more time ashore, they may need to expend more energy to obtain land-based food. Given that polar bears are inefficient at terrestrial locomotion, any extra energy expended to pursue prey could negatively impact survival. However, polar bears have been regularly observed engaging in long pursuits of geese and other land animals, and the energetic worth of such behaviour has been repeatedly questioned. We use data-driven energetic models to examine how energy expenditures vary across polar bear mass and speed. For the first time, we show that polar bears in the 125–235 kg size range can profitably pursue geese, especially at slower speeds. We caution, however, that heat build-up may be the ultimate limiting factor in terrestrial chases, especially for larger bears, and this limit would be reached more quickly with warmer environmental temperatures. PMID:27757238
Anaesthesia in outer space: the ultimate ambulatory setting?
Komorowski, Matthieu; Fleming, Sarah; Hinkelbein, Jochen
2016-12-01
Missions to the Moon or more distant planets are planned in the next future, and will push back the limits of our experience in providing medical support in remote environments. Medical preparedness is ongoing, and involves planning for emergency surgical interventions and anaesthetic procedures. This review will summarize what principles of ambulatory anaesthesia on Earth could benefit the environment of a space mission with its unique constraints. Ambulatory anaesthesia relies on several principles such as improved patient pathway, correct patient selection, optimized procedural strategies to hasten recovery and active prevention of postoperative complications. Severe limitations in the equipment available and the skills of the crew members represent the key factors to be taken into account when designing the on-board medical system for future interplanetary space missions. The application of some of the key principles of ambulatory anaesthesia, as well as recent advances in anaesthetic techniques and better understanding of human adaptation to the space environment might allow nonanaesthesiologist physicians to perform common anaesthetic procedures, whilst maximizing crew safety and minimizing the impact of medical events on the mission.
Understanding chemically processed solar cells based on quantum dots
Malgras, Victor; Nattestad, Andrew; Kim, Jung Ho; Dou, Shi Xue; Yamauchi, Yusuke
2017-01-01
Abstract Photovoltaic energy conversion is one of the best alternatives to fossil fuel combustion. Petroleum resources are now close to depletion and their combustion is known to be responsible for the release of a considerable amount of greenhouse gases and carcinogenic airborne particles. Novel third-generation solar cells include a vast range of device designs and materials aiming to overcome the factors limiting the current technologies. Among them, quantum dot-based devices showed promising potential both as sensitizers and as colloidal nanoparticle films. A good example is the p-type PbS colloidal quantum dots (CQDs) forming a heterojunction with a n-type wide-band-gap semiconductor such as TiO2 or ZnO. The confinement in these nanostructures is also expected to result in marginal mechanisms, such as the collection of hot carriers and generation of multiple excitons, which would increase the theoretical conversion efficiency limit. Ultimately, this technology could also lead to the assembly of a tandem-type cell with CQD films absorbing in different regions of the solar spectrum. PMID:28567179
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wang, D. D., E-mail: dandan.wang@globalfoundries.com; Huang, Y. M.; Tan, P. K.
2015-12-15
Presently two major limiting factors are hindering the failure analysis (FA) development during the semiconductor manufacturing process and technology improvement: (1) Impossibility of manual polishing on the edge dies due to the amenability of layer peeling off; (2) Abundant demand of multi-locations FA, especially focusing different levels of layers simultaneously. Aiming at resolving these limitations, here we demonstrate two unique high precision polishing methods by using focused ion beam (FIB) technique. One is the vertical top down chemical etching at the aimed location; the other one is the planar top down slicing. Using the FIB for delayering not only solvesmore » these problems mentioned above, but also offers significant advantages over physical planar polishing methods such as: (1) having a better control of the delayering progress, (2) enabling precisely milling at a region of interest, (3) providing the prevention of over-delayering and (4) possessing capability to capture images at the region of interest simultaneously and cut into the die directly to expose the exact failure without damaging other sections of the specimen.« less
The individual response to training and competition at altitude.
Chapman, Robert F
2013-12-01
Performance in athletic activities that include a significant aerobic component at mild or moderate altitudes shows a large individual variation. Physiologically, a large portion of the negative effect of altitude on exercise performance can be traced to limitations of oxygen diffusion, either at the level of the alveoli or the muscle microvasculature. In the lung, the ability to maintain arterial oxyhaemoglobin saturation (SaO₂) appears to be a primary factor, ultimately influencing oxygen delivery to the periphery. SaO₂ in hypoxia can be defended by increasing ventilatory drive; however, during heavy exercise, many athletes demonstrate limitations to expiratory flow and are unable to increase ventilation in hypoxia. Additionally, increasing ventilatory work in hypoxia may actually be negative for performance, if dyspnoea increases or muscle blood flow is reduced secondary to an increased sympathetic outflow (eg, the muscle metaboreflex response). Taken together, some athletes are clearly more negatively affected during exercise in hypoxia than other athletes. With careful screening, it may be possible to develop a protocol for determining which athletes may be the most negatively affected during competition and/or training at altitude.
Physicians as gatekeepers: illness certification as a rationing device.
Stone, D A
1979-01-01
Illness or disability is often used as an eligibility criterion by public programs that distribute money, services, privileges, and exemptions. Physicians then play a central role in the allocation process. But physicians are caught between a large pool of applicants who want some benefit, on the one hand, and an organization with limited resources to distribute, on the other hand. Three conflicts are engendered in this gatekeeping role: the tension between trusting and mistrusting information provided by the patient, the tension between erring on the false positive side and the false negative side in diagnostic decision-making, and the tension between doing everything possible for each patient and allocating limited resources among several needy clients. Several non-medical factors influence the ultimate outcome of this allocation process, which, in theory, rests on clinical decision-making: the specificity and restrictiveness of the formal definitions of illness and disability used by a program; the structure of the determination process; the overall policy of the organization on distribution of benefits; and the ability of the organization to use administrative review, direct incentives, and written standards to control the certifying behavior of physicians.
Intensive Home Hemodialysis: An Eye at the Past Looking for the Hemodialysis of the Future.
Naso, Agostino; Scaparrotta, Giuseppe; Naso, Elena; Calò, Lorenzo A
2015-09-01
Multiple observational studies along with a limited number of randomized clinical trials suggest that intensive hemodialysis (IHD) not only improves outcomes for uremic patients undergoing chronic dialysis but does so with a more favorable cost/benefit ratio compared with conventional hemodialysis. As a result of this, there has been a rapid increase in the interest in home hemodialysis (HHD) as HHD represents the easiest means of implementing IHD. While HHD has generated increased interest given its association with better outcomes/reduced hospitalizations, there are very few randomized controlled trials comparing HHD with other hemodialysis methods. Reported HHD-associated increased survival benefits compared with in-center hemodialysis are from uncontrolled studies, which raise patient selection bias as underlying the differences found. Thus, while HHD draws increasing attention, studies that pay careful attention to the psychosocial, demographic, and clinical factors associated with patients selected to undergo HHD will be needed to ultimately demonstrate its benefits, clarify the clinical applications, and determine the limits of IHD use in dialysis patients. Copyright © 2015 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.
The Human Multitude: Forces in the Rising Tide
ERIC Educational Resources Information Center
Glass, Bentley
1971-01-01
Part I of two parts. Considers interrelationships of social and population planning and discusses reasons for continued high birth rates in some human populations. Indicates living space, not food supply, will ultimately limit population growth. (AL)
Tentative civil airworthiness flight criteria for powered-lift transports
NASA Technical Reports Server (NTRS)
Hynes, C. S.; Scott, B. C.
1976-01-01
Representatives of the U.S., British, French, and Canadian airworthiness authorities participated in a NASA/FAA program to formulate tentative civil airworthiness flight criteria for powered-lift transports. The ultimate limits of the flight envelope are defined by boundaries in the airspeed/path-angle plane. Angle of attack and airspeed margins applied to these ultimate limits provide protection against both atmospheric disturbances and disturbances resulting from pilot actions or system variability, but do not ensure maneuvering capability directly, as the 30% speed margin does for conventional transports. Separate criteria provide for direct demonstration of adequate capability for approach path control, flare and landing, and for go-around. Demonstration maneuvers are proposed, and appropriate abuses and failures are suggested. Taken together, these criteria should permit selection of appropriate operating points within the flight envelopes for the approach, landing, and go-around flight phases which are likely to be most critical for powered-lift aircraft.
Application of Three Existing Stope Boundary Optimisation Methods in an Operating Underground Mine
NASA Astrophysics Data System (ADS)
Erdogan, Gamze; Yavuz, Mahmut
2017-12-01
The underground mine planning and design optimisation process have received little attention because of complexity and variability of problems in underground mines. Although a number of optimisation studies and software tools are available and some of them, in special, have been implemented effectively to determine the ultimate-pit limits in an open pit mine, there is still a lack of studies for optimisation of ultimate stope boundaries in underground mines. The proposed approaches for this purpose aim at maximizing the economic profit by selecting the best possible layout under operational, technical and physical constraints. In this paper, the existing three heuristic techniques including Floating Stope Algorithm, Maximum Value Algorithm and Mineable Shape Optimiser (MSO) are examined for optimisation of stope layout in a case study. Each technique is assessed in terms of applicability, algorithm capabilities and limitations considering the underground mine planning challenges. Finally, the results are evaluated and compared.
Continuous-variable quantum probes for structured environments
NASA Astrophysics Data System (ADS)
Bina, Matteo; Grasselli, Federico; Paris, Matteo G. A.
2018-01-01
We address parameter estimation for structured environments and suggest an effective estimation scheme based on continuous-variables quantum probes. In particular, we investigate the use of a single bosonic mode as a probe for Ohmic reservoirs, and obtain the ultimate quantum limits to the precise estimation of their cutoff frequency. We assume the probe prepared in a Gaussian state and determine the optimal working regime, i.e., the conditions for the maximization of the quantum Fisher information in terms of the initial preparation, the reservoir temperature, and the interaction time. Upon investigating the Fisher information of feasible measurements, we arrive at a remarkable simple result: homodyne detection of canonical variables allows one to achieve the ultimate quantum limit to precision under suitable, mild, conditions. Finally, upon exploiting a perturbative approach, we find the invariant sweet spots of the (tunable) characteristic frequency of the probe, able to drive the probe towards the optimal working regime.
Engineering Ultimate Self-Protection in Autonomic Agents for Space Exploration Missions
NASA Technical Reports Server (NTRS)
Sterritt, Roy; Hinchey, Mike
2005-01-01
NASA's Exploration Initiative (EI) will push space exploration missions to the limit. Future missions will be required to be self-managing as well as self-directed, in order to meet the challenges of human and robotic space exploration. We discuss security and self protection in autonomic agent based-systems, and propose the ultimate self-protection mechanism for such systems-self-destruction. Like other metaphors in Autonomic Computing, this is inspired by biological systems, and is the analog of biological apoptosis. Finally, we discus the role it might play in future NASA space exploration missions.
Design optimization of continuous partially prestressed concrete beams
NASA Astrophysics Data System (ADS)
Al-Gahtani, A. S.; Al-Saadoun, S. S.; Abul-Feilat, E. A.
1995-04-01
An effective formulation for optimum design of two-span continuous partially prestressed concrete beams is described in this paper. Variable prestressing forces along the tendon profile, which may be jacked from one end or both ends with flexibility in the overlapping range and location, and the induced secondary effects are considered. The imposed constraints are on flexural stresses, ultimate flexural strength, cracking moment, ultimate shear strength, reinforcement limits cross-section dimensions, and cable profile geometries. These constraints are formulated in accordance with ACI (American Concrete Institute) code provisions. The capabilities of the program to solve several engineering problems are presented.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bucknell, H. III
1976-01-01
The energy problem besetting this country comprises economic, technological, and physical (geologic) factors--but the solutions to this problem will be found, for better or worse, in the political arena. In seeking these solutions, increasing conflict can be anticipated between those of a conservative bent favoring ''free enterprise and limited government'' and those of a liberal persuasion arguing for ''big government and public ownership'' in areas directly affecting the public welfare. The financial capability in this country to develop new energy resources on a massive scale through the private enterprise system alone is concluded to be, at best, marginal. The delaymore » in developing conservation programs and new energy resources is portrayed as being ultimately dangerous to the very nature of our political system. (67 references) (auth)« less
Perioperative Blood Management in Pediatric Spine Surgery.
Oetgen, Matthew E; Litrenta, Jody
2017-07-01
Blood management strategies are integral to successful outcomes in many types of orthopaedic surgery. These strategies minimize blood loss and transfusion requirements, ultimately decreasing complications, improving outcomes, and potentially eliminating risks associated with allogeneic transfusion. Practices to achieve these goals include preoperative evaluation and optimization of hemoglobin, the use of pharmacologic agents or anesthetic methods, intraoperative techniques to improve hemostasis and cell salvage, and the use of predonated autologous blood. Guidelines can also help manage allogeneic transfusions in the perioperative period. Although the literature on blood management has focused primarily on arthroplasty and adult spine surgery, pediatric spinal fusion for scoliosis involves a large group of patients with a specific set of risk factors for transfusion and distinct perioperative considerations. A thorough understanding of blood management techniques will improve surgical planning, limit transfusion-associated risks, maintain hemostasis, and optimize outcomes in this pediatric population.
Polypyrrole/carbon nanotube supercapacitors: Technological advances and challenges
NASA Astrophysics Data System (ADS)
Afzal, Adeel; Abuilaiwi, Faraj A.; Habib, Amir; Awais, Muhammad; Waje, Samaila B.; Atieh, Muataz A.
2017-06-01
The supercapacitors are advanced electrochemical energy storage devices having characteristics such as high storage capacity, rapid delivery of charge, and long cycle life. Polypyrrole (PPy) - an electronically conducting polymer, and carbon nanotubes (CNT) with high surface area and exceptional electrical and mechanical properties are among the most frequently studied advanced electrode materials for supercapacitors. The asymmetric supercapacitors composed of PPy/CNT composite electrodes offer complementary benefits to improve the specific capacitance, energy density, and stability. This article presents an overview of the recent technological advances in PPy/CNT composite supercapacitors and their limitations. Various strategies for synthesis and fabrication of PPy/CNT composites are discussed along with the factors that influence their ultimate electrochemical performance. The drawbacks and challenges of modern PPy/CNT composite supercapacitors are also reviewed, and potential areas of concern are identified for future research and development.
Taylor, Jennifer A; Lacovara, Alicia V
2015-02-01
The National Fire Fighter Near-Miss Reporting System (NFFNMRS) is a voluntary adverse event reporting system designed as a repository to which firefighters submit information on the hazards seen in their work, detailing the events that led to near-misses and injuries. This descriptive article discusses the development of the system since its inception, the strengths and limitations of the resultant data, and the improvements to be made to ensure the system's usefulness. Especially in their infancy, near-miss systems are very dependent on funding and sensitive to any reductions as they head toward steady-state reporting. This sustainability factor has significant implications for continued reporting to the system and the ultimate utility of the data. Very few such data systems exist for occupational health surveillance. © 2015 SAGE Publications.
NASA Technical Reports Server (NTRS)
Dike, Kenneth C; Long, Roger A
1953-01-01
Given three presumably identical lots of commercial, sintered, wrought molybdenum, the 1-hour recrystallization temperature of one lot remained above 2900 F by limiting the amount of effective restraining to 35 percent or less. Different recrystallization temperatures were obtained in various atmospheres, the highest in argon and the lowest in hydrogen. Metal thus fabricated and then stress-relieved possessed an ultimate tensile strength at room temperature within 10 percent of metal swaged 99 percent and also possessed equivalent ductility. At 1800 F, equivalent strength and ductility was obtained irrespective of the amount of swaging over the range of 10 to 99 percent. The amount of swaging greatly influenced the recrystallized grain size but the difference in grain size is not the major controlling factor which determines whether recrystallized molybdenum is ductile or brittle at room temperature.
Genetic Factors in Tendon Injury: A Systematic Review of the Literature
Vaughn, Natalie H.; Stepanyan, Hayk; Gallo, Robert A.; Dhawan, Aman
2017-01-01
Background: Tendon injury such as tendinopathy or rupture is common and has multiple etiologies, including both intrinsic and extrinsic factors. The genetic influence on susceptibility to tendon injury is not well understood. Purpose: To analyze the published literature regarding genetic factors associated with tendon injury. Study Design: Systematic review; Level of evidence, 3. Methods: A systematic review of published literature was performed in concordance with the Preferred Reporting Items of Systematic Reviews and Meta-analysis (PRISMA) guidelines to identify current evidence for genetic predisposition to tendon injury. PubMed, Ovid, and ScienceDirect databases were searched. Studies were included for review if they specifically addressed genetic factors and tendon injuries in humans. Reviews, animal studies, or studies evaluating the influence of posttranscription factors and modifications (eg, proteins) were excluded. Results: Overall, 460 studies were available for initial review. After application of inclusion and exclusion criteria, 11 articles were ultimately included for qualitative synthesis. Upon screening of references of these 11 articles, an additional 15 studies were included in the final review, for a total of 26 studies. The genetic factors with the strongest evidence of association with tendon injury were those involving type V collagen A1, tenascin-C, matrix metalloproteinase–3, and estrogen-related receptor beta. Conclusion: The published literature is limited to relatively homogenous populations, with only level 3 and level 4 data. Additional research is needed to make further conclusions about the genetic factors involved in tendon injury. PMID:28856171
Future Synchrotron Light Sources Based on Ultimate Storage Rings
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cai, Yunhai; /SLAC
2012-04-09
The main purpose of this talk is to describe how far one might push the state of the art in storage ring design. The talk will start with an overview of the latest developments and advances in the design of synchrotron light sources based on the concept of an 'ultimate' storage ring. The review will establish how bright a ring based light source might be, where the frontier of technological challenges are, and what the limits of accelerator physics are. Emphasis will be given to possible improvements in accelerator design and developments in technology toward the goal of achieving anmore » ultimate storage ring. An ultimate storage ring (USR), defined as an electron ring-based light source having an emittance in both transverse planes at the diffraction limit for the range of X-ray wavelengths of interest for a scientific community, would provide very high brightness photons having high transverse coherence that would extend the capabilities of X-ray imaging and probe techniques beyond today's performance. It would be a cost-effective, high-coherence 4th generation light source, competitive with one based on energy recovery linac (ERL) technology, serving a large number of users studying material, chemical, and biological sciences. Furthermore, because of the experience accumulated over many decades of ring operation, it would have the great advantage of stability and reliability. In this paper we consider the design of an USR having 10-pm-rad emittance. It is a tremendous challenge to design a storage ring having such an extremely low emittance, a factor of 100 smaller than those in existing light sources, especially such that it has adequate dynamic aperture and beam lifetime. In many ultra-low emittance designs, the injection acceptances are not large enough for accumulation of the electron beam, necessitating on-axis injection where stored electron bunches are completely replaced with newly injected ones. Recently, starting with the MAX-IV 7-bend achromatic cell, we have made significant progress with the design of PEP-X, a USR that would inhabit the decommissioned PEP-II tunnel at SLAC. The enlargement of the dynamic aperture is largely a result of the cancellations of the 4th-order resonances in the 3rd-order achromats and the effective use of lattice optimization programs. In this paper, we will show those cancellations of the 4th-order resonances using an analytical approach based on the exponential Lie operators and the Poisson brackets. Wherever possible, our analytical results will be compared with their numerical counterparts. Using the derived formulae, we will construct 4th-order geometric achromats and use them as modules for the lattice of the PEP-X USR, noting that only geometric terms are canceled to the 4th order.« less
Professional Development and Teacher Change: The Missing Leadership Link
ERIC Educational Resources Information Center
Whitworth, Brooke A.; Chiu, Jennifer L.
2015-01-01
Professional development in science education aims to support teacher learning with the ultimate goal of improving student achievement. A multitude of factors influence teacher change and the effectiveness of professional development. This review of the literature explores these factors and identifies school and district science leaders as a…
Gain scheduling - Potential hazards and possible remedies
NASA Technical Reports Server (NTRS)
Shamma, Jeff S.; Athans, Michael
1991-01-01
A common gain scheduling rule-of-thumb is to schedule on a slow variable. In this work, it is shown how current gain scheduling practice is necessarily limited to slow variations in the scheduling variable. These limitations are revealed to be consequences of fundamental control concepts. Furthermore, it is shown how a formulation of the gain scheduling procedure can lead toward ultimately removing these restrictions.
2017-01-01
Recent advances in next-generation sequencing approaches have revolutionized our understanding of transcriptional expression in diverse systems. However, measurements of transcription do not necessarily reflect gene translation, the process of ultimate importance in understanding cellular function. To circumvent this limitation, biochemical tagging of ribosome subunits to isolate ribosome-associated mRNA has been developed. However, this approach, called TRAP, lacks quantitative resolution compared to a superior technology, ribosome profiling. Here, we report the development of an optimized ribosome profiling approach in Drosophila. We first demonstrate successful ribosome profiling from a specific tissue, larval muscle, with enhanced resolution compared to conventional TRAP approaches. We next validate the ability of this technology to define genome-wide translational regulation. This technology is leveraged to test the relative contributions of transcriptional and translational mechanisms in the postsynaptic muscle that orchestrate the retrograde control of presynaptic function at the neuromuscular junction. Surprisingly, we find no evidence that significant changes in the transcription or translation of specific genes are necessary to enable retrograde homeostatic signaling, implying that post-translational mechanisms ultimately gate instructive retrograde communication. Finally, we show that a global increase in translation induces adaptive responses in both transcription and translation of protein chaperones and degradation factors to promote cellular proteostasis. Together, this development and validation of tissue-specific ribosome profiling enables sensitive and specific analysis of translation in Drosophila. PMID:29194454
Optical performance of hybrid porous silicon-porous alumina multilayers
NASA Astrophysics Data System (ADS)
Cencha, L. G.; Antonio Hernández, C.; Forzani, L.; Urteaga, R.; Koropecki, R. R.
2018-05-01
In this work, we study the optical response of structures involving porous silicon and porous alumina in a multi-layered hybrid structure. We performed a rational design of the optimal sequence necessary to produce a high transmission and selective filter, with potential applications in chemical and biosensors. The combination of these porous materials can be used to exploit its distinguishing features, i.e., high transparency of alumina and high refractive index of porous silicon. We assembled hybrid microcavities with a central porous alumina layer between two porous silicon Bragg reflectors. In this way, we constructed a Fabry-Perot resonator with high reflectivity and low absorption that improves the quality of the filter compared to a microcavity built only with porous silicon or porous alumina. We explored a simpler design in which one of the Bragg reflectors is replaced by the aluminium that remains bound to the alumina after its fabrication. We theoretically explored the potential of the proposal and its limitations when considering the roughness of the layers. We found that the quality of a microcavity made entirely with porous silicon shows a limit in the visible range due to light absorption. This limitation is overcome in the hybrid scheme, with the roughness of the layers determining the ultimate quality. Q-factors of 220 are experimentally obtained for microcavities supported on aluminium, while Q-factors around 600 are reached for microcavities with double Bragg reflectors, centred at 560 nm. This represents a four-fold increase with respect to the optimal porous silicon microcavity at this wavelength.
NASA Astrophysics Data System (ADS)
Murtinho, Felipe; Hayes, Tanya
2017-06-01
Payment for Environmental Service programs are increasingly applied in communal settings where resource users collectively join the program and agree to limit their shared use of a common-property resource. Who decides to join PES and the degree to which community members agree with the collective decision is critical for the success of said programs. Yet, we have limited understanding of the factors that influence communal participation and the collective decision process. This paper examines communal participation in a national payment for conservation program in Ecuador. We use quantitative and qualitative analysis to (i) identify the attributes of the communities that participate (or not), and factors that facilitate participation ( n = 67), and (ii) assess household preference and alignment with the collective decision to participate ( n = 212). Household participation preferences indicate varying degrees of consensus with the collective decision to participate, with those using the resource less likely to support participation. At the communal level, however, our results indicate that over time, those communities that depend more heavily on their resource systems may ultimately choose to participate. Our findings suggest that communal governance structures and outside organizations may be instrumental in gaining participation in resource-dependent communities and building consensus. Findings also point to the need for further research on communal decision-processes to ensure that the collective decision is based on an informed and democratic process.
Interconnect patterns for printed organic thermoelectric devices with large fill factors
NASA Astrophysics Data System (ADS)
Gordiz, Kiarash; Menon, Akanksha K.; Yee, Shannon K.
2017-09-01
Organic materials can be printed into thermoelectric (TE) devices for low temperature energy harvesting applications. The output voltage of printed devices is often limited by (i) small temperature differences across the active materials attributed to small leg lengths and (ii) the lower Seebeck coefficient of organic materials compared to their inorganic counterparts. To increase the voltage, a large number of p- and n-type leg pairs is required for organic TEs; this, however, results in an increased interconnect resistance, which then limits the device output power. In this work, we discuss practical concepts to address this problem by positioning TE legs in a hexagonal closed-packed layout. This helps achieve higher fill factors (˜91%) than conventional inorganic devices (˜25%), which ultimately results in higher voltages and power densities due to lower interconnect resistances. In addition, wiring the legs following a Hilbert spacing-filling pattern allows for facile load matching to each application. This is made possible by leveraging the fractal nature of the Hilbert interconnect pattern, which results in identical sub-modules. Using the Hilbert design, sub-modules can better accommodate non-uniform temperature distributions because they naturally self-localize. These device design concepts open new avenues for roll-to-roll printing and custom TE module shapes, thereby enabling organic TE modules for self-powered sensors and wearable electronic applications.
... and fund research into the disease mechanisms of sarcoidosis, predisposing factors, genetic underpinnings, and the potential for ... better ways to diagnose, treat, and ultimately cure sarcoidosis and neurosarcardoisis. Information from the National Library of ...
Communication in view of limited resources: international perspective.
Zwitter, Matjaz
2013-01-01
Low socioeconomic status is associated with several risk factors for cancer, including a higher risk of presentation with advanced and often incurable disease. Treating patients in areas with limited resources requires not only the goal of saving or prolonging life, but also to alleviate suffering, including physical, emotional, and social components. Because complete coverage of all costs for modern cancer management by local institutions or governments is not possible in most (if not all) areas, most patients with cancer have to contribute toward the costs of their treatment. However, the demand for financially sustainable health care leads to restrictions in the spectrum of available treatments and often results in the creation of waiting lists for people requiring treatment. Communication between patients and providers in such circumstances is often challenging, especially when coupled with patients who have limited or no health care insurance and/or lack any ability to pay for services. Ultimately, any treatment plan should take into account the risks, benefits, personal goals, and beliefs of the individual with cancer. In areas of limited resources, the financial burden of treatment placed on the patient and his or her family must also be a part of the conversation and decisions regarding therapy. Within these parameters, sharing information and options becomes an indispensable condition for communication and the foundation of trust in the doctor-patient relationship.
van Niekerk, Karin; Dada, Shakila; Tönsing, Kerstin
2017-12-20
Selection of assistive technology for young children is a complex process. Within a context with limited resources, such as South Africa, research is needed to determine the factors influencing the assistive technology selection process, as these could ultimately either facilitate or hinder the availability and accessibility of affordable, adaptable, acceptable, and high quality assistive technology for this age group. Two asynchronous online focus groups were conducted with 16 rehabilitation professionals to identify the factors they perceived to influence the selection and provision of assistive technology to young children within the South African context. A process of deductive thematic analysis was followed by inductive analysis of the data. Components of the Assistive Technology Device Selection Framework were used as themes to guide the deductive analysis, followed by inductive analysis to create subthemes. The important role of the professional was highlighted in negotiating all the factors to consider in the assistive technology selection and provision process. Adaptation of the Assistive Technology Device Selection Framework is suggested in order to facilitate application to low resourced contexts, such as South Africa. Implications for rehabilitation Assistive technology selection is a complex process with factors pertaining to the users (child and family) of the assistive technology, as well as the rehabilitation professional recommending the assistive technology influencing the process. Although it may be an important factor, the availability of financial resources to purchase assistive technology is not the only determining factor in providing appropriate assistive technology to young children in contexts with limited resources. Formalized support, such as reflective supervision or mentorship programs should be facilitated and utilized by recommending professionals. Home and school visits during assessment ensure a good match between assistive technology and users within the particular context. Facilitating the availability of assistive technology for trial during assessment and/or for a period afterwards will increase the likelihood that appropriate recommendations for assistive technology are made.
Nanotechnology in bone tissue engineering.
Walmsley, Graham G; McArdle, Adrian; Tevlin, Ruth; Momeni, Arash; Atashroo, David; Hu, Michael S; Feroze, Abdullah H; Wong, Victor W; Lorenz, Peter H; Longaker, Michael T; Wan, Derrick C
2015-07-01
Nanotechnology represents a major frontier with potential to significantly advance the field of bone tissue engineering. Current limitations in regenerative strategies include impaired cellular proliferation and differentiation, insufficient mechanical strength of scaffolds, and inadequate production of extrinsic factors necessary for efficient osteogenesis. Here we review several major areas of research in nanotechnology with potential implications in bone regeneration: 1) nanoparticle-based methods for delivery of bioactive molecules, growth factors, and genetic material, 2) nanoparticle-mediated cell labeling and targeting, and 3) nano-based scaffold construction and modification to enhance physicochemical interactions, biocompatibility, mechanical stability, and cellular attachment/survival. As these technologies continue to evolve, ultimate translation to the clinical environment may allow for improved therapeutic outcomes in patients with large bone deficits and osteodegenerative diseases. Traditionally, the reconstruction of bony defects has relied on the use of bone grafts. With advances in nanotechnology, there has been significant development of synthetic biomaterials. In this article, the authors provided a comprehensive review on current research in nanoparticle-based therapies for bone tissue engineering, which should be useful reading for clinicians as well as researchers in this field. Copyright © 2015 Elsevier Inc. All rights reserved.
Bowerman, Tracy; Neilson, Bethany; Budy, Phaedra
2014-01-01
Successful spawning is imperative for the persistence of salmonid populations, but relatively little research has been conducted to evaluate factors affecting early life-stage survival for bull trout (Salvelinus confluentus), a threatened char. We conducted a field experiment to assess the relationship between site-specific environmental factors and bull trout embryo survival and fry emergence timing. Survival from egg to hatch was negatively related to percent fine sediment (<1 mm) in the redd and positively related to the strength of downwelling at spawning sites. Survival of eggs to fry emergence was also negatively related to fine sediment, and the best statistical models included additional variables that described the rate of downwelling and intragravel flow within the incubation environment. Fry emerged at an earlier stage in development from redds with high percentages of fine sediment. Increased hydraulic conductivity via redd construction and selection of spawning sites with strong downwelling appear to enhance hyporheic flow rates and bull trout egg survival, but early life-stage success may ultimately be limited by intrusion of fine sediment into the incubation environment.
Social complexity as a proximate and ultimate factor in communicative complexity
Freeberg, Todd M.; Dunbar, Robin I. M.; Ord, Terry J.
2012-01-01
The ‘social complexity hypothesis’ for communication posits that groups with complex social systems require more complex communicative systems to regulate interactions and relations among group members. Complex social systems, compared with simple social systems, are those in which individuals frequently interact in many different contexts with many different individuals, and often repeatedly interact with many of the same individuals in networks over time. Complex communicative systems, compared with simple communicative systems, are those that contain a large number of structurally and functionally distinct elements or possess a high amount of bits of information. Here, we describe some of the historical arguments that led to the social complexity hypothesis, and review evidence in support of the hypothesis. We discuss social complexity as a driver of communication and possible causal factor in human language origins. Finally, we discuss some of the key current limitations to the social complexity hypothesis—the lack of tests against alternative hypotheses for communicative complexity and evidence corroborating the hypothesis from modalities other than the vocal signalling channel. PMID:22641818
Transdifferentiation of myoblasts into osteoblasts - possible use for bone therapy.
Lin, Daphne P L; Carnagarin, Revathy; Dharmarajan, Arun; Dass, Crispin R
2017-12-01
Transdifferentiation is defined as the conversion of one cell type to another and is an ever-expanding field with a growing number of cells found to be capable of such a process. To date, the fact remains that there are limited treatment options for fracture healing, osteoporosis and bone repair post-destruction by bone tumours. Hence, this review focuses on the transdifferentiation of myoblast to osteoblast as a means to further understand the transdifferentiation process and to investigate a potential therapeutic option if successful. The potent osteoinductive effects of the bone morphogenetic protein-2 are largely implicated in the transdifferentiation of myoblast to osteoblast. Bone morphogenetic protein-2-induced activation of the Smad1 protein ultimately results in JunB synthesis, the first transcriptional step in myoblast dedifferentiation. The upregulation of the activating protein-1 binding activity triggers the transcription of the runt-related transcription factor 2 gene, a transcription factor that plays a major role in osteoblast differentiation. This potential transdifferentiation treatment may be utilised for dental implants, fracture healing, osteoporosis and bone repair post-destruction by bone tumours. © 2017 Royal Pharmaceutical Society.
Implications of Differential Stress Response Activation Following Non-Frozen Hepatocellular Storage
Corwin, William L.; Baust, John G.; Van Buskirk, Robert G.
2013-01-01
Hepatocytes are critical for numerous cell therapies and in vitro investigations. A limiting factor for their use in these applications is the ability to process and preserve them without loss of viability or functionality. Normal rat hepatocytes (NHEPs) and human hepatoma (C3A) cells were stored at either 4°C or 37°C to examine post-processing stress responses. Resveratrol and salubrinal were used during storage to determine how targeted molecular stress pathway modulation would affect cell survival. This study revealed that storage outcome is dependent upon numerous factors including: cell type, storage media, storage length, storage temperature, and chemical modulator. These data implicate a molecular-based stress response that is not universal but is specific to the set of conditions under which cells are stored. Further, these findings allude to the potential for targeted protection or destruction of particular cell types for numerous applications, from diagnostic cell selection to cell-based therapy. Ultimately, this study demonstrates the need for further in-depth molecular investigations into the cellular stress response to bioprocessing and preservation. PMID:24845253
Martins, Samuel C. V.; Galmés, Jeroni; Cavatte, Paulo C.; Pereira, Lucas F.; Ventrella, Marília C.; DaMatta, Fábio M.
2014-01-01
It has long been held that the low photosynthetic rates (A) of coffee leaves are largely associated with diffusive constraints to photosynthesis. However, the relative limitations of the stomata and mesophyll to the overall diffusional constraints to photosynthesis, as well as the coordination of leaf hydraulics with photosynthetic limitations, remain to be fully elucidated in coffee. Whether the low actual A under ambient CO2 concentrations is associated with the kinetic properties of Rubisco and high (photo)respiration rates also remains elusive. Here, we provide a holistic analysis to understand the causes associated with low A by measuring a variety of key anatomical/hydraulic and photosynthetic traits in sun- and shade-grown coffee plants. We demonstrate that leaf hydraulic architecture imposes a major constraint on the maximisation of the photosynthetic gas exchange of coffee leaves. Regardless of the light treatments, A was mainly limited by stomatal factors followed by similar limitations associated with the mesophyll and biochemical constraints. No evidence of an inefficient Rubisco was found; rather, we propose that coffee Rubisco is well tuned for operating at low chloroplastic CO2 concentrations. Finally, we contend that large diffusive resistance should lead to large CO2 drawdown from the intercellular airspaces to the sites of carboxylation, thus favouring the occurrence of relatively high photorespiration rates, which ultimately leads to further limitations to A. PMID:24743509
Molecular Mechanisms of Stress-Responsive Changes in Collagen and Elastin Networks in Skin.
Aziz, Jazli; Shezali, Hafiz; Radzi, Zamri; Yahya, Noor Azlin; Abu Kassim, Noor Hayaty; Czernuszka, Jan; Rahman, Mohammad Tariqur
2016-01-01
Collagen and elastin networks make up the majority of the extracellular matrix in many organs, such as the skin. The mechanisms which are involved in the maintenance of homeostatic equilibrium of these networks are numerous, involving the regulation of genetic expression, growth factor secretion, signalling pathways, secondary messaging systems, and ion channel activity. However, many factors are capable of disrupting these pathways, which leads to an imbalance of homeostatic equilibrium. Ultimately, this leads to changes in the physical nature of skin, both functionally and cosmetically. Although various factors have been identified, including carcinogenesis, ultraviolet exposure, and mechanical stretching of skin, it was discovered that many of them affect similar components of regulatory pathways, such as fibroblasts, lysyl oxidase, and fibronectin. Additionally, it was discovered that the various regulatory pathways intersect with each other at various stages instead of working independently of each other. This review paper proposes a model which elucidates how these molecular pathways intersect with one another, and how various internal and external factors can disrupt these pathways, ultimately leading to a disruption in collagen and elastin networks. © 2016 S. Karger AG, Basel.
McCue, Marshall D; Albach, Audrey; Salazar, Giovanni
The risk of food limitation and, ultimately, starvation dates back to the dawn of heterotrophy in animals, yet starvation remains a major factor in the regulation of modern animal populations. Researchers studying starvation more than a century ago suggested that animals subjected to sublethal periods of food limitation are somehow more tolerant of subsequent starvation events. This possibility has received little attention over the past decades, yet it is highly relevant to modern science for two reasons. First, animals in natural populations are likely to be exposed to bouts of food limitation once or more before they face prolonged starvation, during which the risk of mortality becomes imminent. Second, our current approach to studying starvation physiology in the laboratory focuses on nourished animals with no previous exposure to nutritional stress. We examined the relationship between previous exposure to food limitation and potentially adaptive physiological responses to starvation in adult rats and found several significant differences. On two occasions, rats were fasted until they lost 20% of their body mass maintained lower body temperatures, and had presumably lower energy requirements when subjected to prolonged starvation than their naive cohort that never experienced food limitation. These rats that were trained in starvation also had lower plasma glucose set -points and reduced their reliance on endogenous lipid oxidation. These findings underscore (1) the need for biologists to revisit the classic hypothesis that animals can become habituated to starvation, using a modern set of research tools; and (2) the need to design controlled experiments of starvation physiology that more closely resemble the dynamic nature of food availability.
The ultimate efficiency of photosensitive systems
NASA Technical Reports Server (NTRS)
Buoncristiani, A. M.; Byvik, C. E.; Smith, B. T.
1981-01-01
These systems have in common two important but not independent features: they can produce a storable fuel, and they are sensitive only to radiant energy with a characteristic absorption spectrum. General analyses of the conversion efficiencies were made using the operational characteristics of each particular system. An efficiency analysis of a generalized system consisting of a blackbody source, a radiant energy converter having a threshold energy and operating temperature, and a reservoir is reported. This analysis is based upon the first and second laws of thermodynamics, and leads to a determination of the limiting or ultimate efficiency for an energy conversion system having a characteristic threshold.
Starkey, Colin P; Geesink, Geert H; Collins, Damian; Hutton Oddy, V; Hopkins, David L
2016-03-01
The longissimus (n=118) (LL), semimembranosus (n=104) (SM) and biceps femoris (n=134) (BF) muscles were collected from lamb and sheep carcases and aged for 5days (LL and SM) and 14days (BF) to study the impact of muscle characteristics on tenderness as assessed by shear force (SF) and sensory evaluation. The impact of gender, animal age, collagen content, sarcomere length (SL), desmin degradation, ultimate pH and intramuscular fat (IMF) on tenderness was examined. The main factors which influenced SF of the LL were IMF, SL and desmin degradation, but for sensory tenderness, IMF, ultimate pH and gender were the main factors. The SF and sensory tenderness of the SM was best predicted by the degree of desmin degradation. For the BF soluble collagen and animal age both influenced SF. Different factors affect tenderness across muscles and not one prediction model applied across all muscles equally well. Copyright © 2015 Elsevier Ltd. All rights reserved.
Examining extrinsic factors that influence product acceptance: a review.
Li, X E; Jervis, S M; Drake, M A
2015-05-01
Drivers of liking (DOL) studies are useful for product development to formulate acceptable products; however, DOL alone are insufficient for understanding why a product is purchased and repurchased, which is ultimately the indication of a successful product. Ultimately sensory attributes drive product success (that is, repeat and continued purchase). However, ignoring the importance of extrinsic factors may neglect the vital product attributes responsible for the initial purchase, which may in turn, affect repeat purchase. The perception of sensory attributes assessed by DOL is mitigated by external perceptions of quality. If the sensory attributes do not deliver based upon the quality cues, the product will not be acceptable. Four key extrinsic factors that affect DOL are the perceived satiety, brand and labeling, price, and the emotional impact to decision making. In order to more thoroughly understand what the DOL for a product is, these 4 product cues should be considered in conjunction with sensory attribute perception to gain a holistic understanding of product acceptance. © 2015 Institute of Food Technologists®
Probing the Limits of Reality: The Metaphysics in Science Fiction.
ERIC Educational Resources Information Center
Taylor, John L.
2003-01-01
Addresses metaphysical questions concerning the ultimate structure of reality and discusses scientific nature. Suggests that the world cannot afford to neglect the role of conceptual analysis in thinking critically about the possibilities that science fiction claims to describe. (Author/KHR)
Secondary Moments due to Prestressing with Different Bond at the Ultimate Limit State
NASA Astrophysics Data System (ADS)
Halvoník, Jaroslav; Pažma, Peter; Vida, Radoslav
2018-03-01
Secondary effects of prestressing develop in statically indeterminate structures (e.g., continuous beams) due to the restraint of deformations imposed by hyperstatic restraints. These effects may significantly influence internal forces and stresses in prestressed structures. Secondary effects are influenced by the redundancy of a structural system, which raises the question of whether they will remain constant after a change in the structural system, e.g., due to the development of plastic hinge(s) in a critical cross-section(s) or after the development of a kinematic mechanism, or if they will disappear when the structure changes into a sequence of simply supported beams. The paper deals with an investigation of the behavior of continuous post-tensioned beams subjected to an ultimate load with significant secondary effects from prestressing. A total of 6 two-span beams prestressed by tendons with different bonds were tested in a laboratory with a load that changed their structural system into a kinematic mechanism. The internal forces and secondary effects of the prestressing were controlled through measurements of the reactions in all the supports. The results revealed that the secondary effects remained as a permanent part of the action on the experimental beams, even after the development of the kinematic mechanism. The results obtained confirmed that secondary effects should be included in all combinations of actions for verifications of ultimate limit states (ULS).
EGFR G796D mutation mediates resistance to osimertinib.
Zheng, Di; Hu, Min; Bai, Yu; Zhu, Xuehua; Lu, Xuesong; Wu, Chunyan; Wang, Jiying; Liu, Li; Wang, Zheng; Ni, Jian; Yang, Zhenfan; Xu, Jianfang
2017-07-25
Osimertinib is an effective third-generation epidermal growth factor receptor (EGFR) tyrosine kinase inhibitor (TKI) approved in multiple countries and regions for patients with EGFR T790M mutation-positive non-small cell lung cancer (NSCLC). Despite impressive initial tumor responses, development of drug resistance ultimately limits the benefit of this compound. Mechanisms of resistance to osimertinib are just beginning to emerge, such as EGFR C797S and L718Q mutations, BRAF V600E and PIK3CA E545K mutations, as well as ERBB2 and MET amplification. However, a comprehensive view is still missing. In this study, we presented the first case of Chinese NSCLC patient who developed resistance to osimertinib, and discovered de novo EGFR G796D mutation as a potential mechanism. Our findings provided insights into mechanisms of resistance to osimertinib and highlighted tumor heterogeneity and clonal evolution during the development of drug resistance.
EGFR G796D mutation mediates resistance to osimertinib
Bai, Yu; Zhu, Xuehua; Lu, Xuesong; Wu, Chunyan; Wang, Jiying; Liu, Li; Wang, Zheng; Ni, Jian; Yang, Zhenfan; Xu, Jianfang
2017-01-01
Osimertinib is an effective third-generation epidermal growth factor receptor (EGFR) tyrosine kinase inhibitor (TKI) approved in multiple countries and regions for patients with EGFR T790M mutation-positive non-small cell lung cancer (NSCLC). Despite impressive initial tumor responses, development of drug resistance ultimately limits the benefit of this compound. Mechanisms of resistance to osimertinib are just beginning to emerge, such as EGFR C797S and L718Q mutations, BRAF V600E and PIK3CA E545K mutations, as well as ERBB2 and MET amplification. However, a comprehensive view is still missing. In this study, we presented the first case of Chinese NSCLC patient who developed resistance to osimertinib, and discovered de novo EGFR G796D mutation as a potential mechanism. Our findings provided insights into mechanisms of resistance to osimertinib and highlighted tumor heterogeneity and clonal evolution during the development of drug resistance. PMID:28572531
Transcatheter Aortic Valve Replacement: a Kidney’s Perspective
Cheungpasitporn, Wisit; Thongprayoon, Charat; Kashani, Kianoush
2016-01-01
Transcatheter aortic valve replacement (TAVR) has now emerged as a viable treatment option for high-risk patients with severe aortic stenosis (AS) who are not suitable candidates for surgical aortic valve replacement (SAVR). Despite encouraging published outcomes, acute kidney injury (AKI) is common and lowers the survival of patients after TAVR. The pathogenesis of AKI after TAVR is multifactorial including TAVR specific factors such as the use of contrast agents, hypotension during rapid pacing, and embolization; preventive measures may include pre-procedural hydration, limitation of contrast dye exposure, and avoidance of intraprocedural hypotension. In recent years, the number of TAVR performed worldwide has been increasing, as well as published data on renal perspectives of TAVR including AKI, chronic kidney disease, end-stage kidney disease, and kidney transplantation. This review aims to present the current literature on the nephrology aspects of TAVR, ultimately to improve the patients’ quality of care and outcomes. PMID:27069960
Outcome Prediction of Treatment of Graves' Hyperthyroidism with Antithyroid Drugs.
Piantanida, E; Lai, A; Sassi, L; Gallo, D; Spreafico, E; Tanda, M L; Bartalena, L
2015-09-01
Graves' disease is the most common cause of hyperthyroidism in iodine-replete areas and is ultimately due to antibodies interacting with the TSH receptor on thyroid follicular cells [TSH-receptor antibody (TRAb)]. Antithyroid drugs (ATDs) belonging to the family of thionamides are the first-line treatment in Europe. ATD treatment is commonly continued for 18-24 months. Its major limitation is the high rate of relapses after drug withdrawal. Factors particularly bound to subsequent relapses are the large thyroid volume, smoking habit, persistence of TRAb in the circulation at the end of treatment, and the post-partum period. Under these conditions, consideration should be given to a definitive therapy for hyperthyroidism (radioiodine treatment, thyroidectomy), particularly if the patient is at risk of cardiovascular complications that might be exacerbated by persistence or recurrence of hyperthyroidism. © Georg Thieme Verlag KG Stuttgart · New York.
Control of HIV infection by IFN-α: implications for latency and a cure.
Bourke, Nollaig M; Napoletano, Silvia; Bannan, Ciaran; Ahmed, Suaad; Bergin, Colm; McKnight, Áine; Stevenson, Nigel J
2018-03-01
Viral infections, including HIV, trigger the production of type I interferons (IFNs), which in turn, activate a signalling cascade that ultimately culminates with the expression of anti-viral proteins. Mounting evidence suggests that type I IFNs, in particular IFN-α, play a pivotal role in limiting acute HIV infection. Highly active anti-retroviral treatment reduces viral load and increases life expectancy in HIV positive patients; however, it fails to fully eliminate latent HIV reservoirs. To revisit HIV as a curable disease, this article reviews a body of literature that highlights type I IFNs as mediators in the control of HIV infection, with particular focus on the anti-HIV restriction factors induced and/or activated by IFN-α. In addition, we discuss the relevance of type I IFN treatment in the context of HIV latency reversal, novel therapeutic intervention strategies and the potential for full HIV clearance.
Static test induced loads verification beyond elastic limit
NASA Technical Reports Server (NTRS)
Verderaime, V.; Harrington, F.
1996-01-01
Increasing demands for reliable and least-cost high-performance aerostructures are pressing design analyses, materials, and manufacturing processes to new and narrowly experienced performance and verification technologies. This study assessed the adequacy of current experimental verification of the traditional binding ultimate safety factor which covers rare events in which no statistical design data exist. Because large high-performance structures are inherently very flexible, boundary rotations and deflections under externally applied loads approaching fracture may distort their transmission and unknowingly accept submarginal structures or prematurely fracturing reliable ones. A technique was developed, using measured strains from back-to-back surface mounted gauges, to analyze, define, and monitor induced moments and plane forces through progressive material changes from total-elastic to total-inelastic zones within the structural element cross section. Deviations from specified test loads are identified by the consecutively changing ratios of moment-to-axial load.
Static test induced loads verification beyond elastic limit
NASA Technical Reports Server (NTRS)
Verderaime, V.; Harrington, F.
1996-01-01
Increasing demands for reliable and least-cost high performance aerostructures are pressing design analyses, materials, and manufacturing processes to new and narrowly experienced performance and verification technologies. This study assessed the adequacy of current experimental verification of the traditional binding ultimate safety factor which covers rare events in which no statistical design data exist. Because large, high-performance structures are inherently very flexible, boundary rotations and deflections under externally applied loads approaching fracture may distort their transmission and unknowingly accept submarginal structures or prematurely fracturing reliable ones. A technique was developed, using measured strains from back-to-back surface mounted gauges, to analyze, define, and monitor induced moments and plane forces through progressive material changes from total-elastic to total inelastic zones within the structural element cross section. Deviations from specified test loads are identified by the consecutively changing ratios of moment-to-axial load.
Pro-environmental behavior: rational choice meets moral motivation.
Turaga, Rama Mohana R; Howarth, Richard B; Borsuk, Mark E
2010-01-01
The determinants of individual behaviors that provide shared environmental benefits are a longstanding theme in social science research. Alternative behavioral models yield markedly different predictions and policy recommendations. This paper reviews and compares the literatures from two disciplines that appear to be moving toward a degree of convergence. In social psychology, moral theories of pro-environmental behavior have focused on the influence of personal moral norms while recognizing that external factors, such as costs and incentives, ultimately limit the strength of the norm-behavior relationship. Rational choice models, such as the theory of planned behavior in social psychology and the theories of voluntary provision of public goods in economics, have sought to incorporate the effects of personal norms and to measure their importance in explaining behaviors, such as recycling and the demand for green products. This paper explores the relationship between these approaches and their implications for the theory and practice of ecological economics.
Biosequestration of atmospheric CO2 and flue gas-containing CO2 by microalgae.
Cheah, Wai Yan; Show, Pau Loke; Chang, Jo-Shu; Ling, Tau Chuan; Juan, Joon Ching
2015-05-01
The unceasing rise of greenhouse gas emission has led to global warming and climate change. Global concern on this phenomenon has put forward the microalgal-based CO2 sequestration aiming to sequester carbon back to the biosphere, ultimately reducing greenhouse effects. Microalgae have recently gained enormous attention worldwide, to be the valuable feedstock for renewable energy production, due to their high growth rates, high lipid productivities and the ability to sequester carbon. The photosynthetic process of microalgae uses atmospheric CO2 and CO2 from flue gases, to synthesize nutrients for their growth. In this review article, we will primarily discuss the efficiency of CO2 biosequestration by microalgae species, factors influencing microalgal biomass productions, microalgal cultivation systems, the potential and limitations of using flue gas for microalgal cultivation as well as the bio-refinery approach of microalgal biomass. Copyright © 2014 Elsevier Ltd. All rights reserved.
Quadrupole mass filter: design and performance for operation in stability zone 3.
Syed, Sarfaraz U A H; Hogan, Thomas J; Antony Joseph, Mariya J; Maher, Simon; Taylor, Stephen
2013-10-01
The predicted performance of a quadrupole mass filter (QMF) operating in Mathieu stability zone 3 is described in detail using computer simulations. The investigation considers the factors that limit the ultimate maximum resolution (Rmax) and percentage transmission (%Tx), which can be obtained for a given QMF for a particular scan line of operation. The performance curve (i.e., the resolution (R) versus number (N) of radio frequency (rf) cycles experienced by the ions in the mass filter) has been modeled for the upper and lower tip of stability zone 3. The saturation behavior of the performance curve observed in practice for zone 3 is explained. Furthermore, new design equations are presented by examining the intersection of the scan line with stability zone 3. Resolution versus transmission characteristics of stability zones 1 and 3 are compared and the dependence of performance for zones 1 and 3 is related to particular instrument operating parameters.
Impact of black carbon on the bioaccessibility of organic contaminants in soil.
Semple, Kirk T; Riding, Matthew J; McAllister, Laura E; Sopena-Vazquez, Fatima; Bending, Gary D
2013-10-15
The ability of carbonaceous geosorbents (CGs) such as black carbon (BC) to extensively sorb many common environmental contaminants suggests that they potentially possesses qualities useful to the sequestration of harmful xenobiotics within contaminated land. Presently, however, there is limited understanding of the implications for the bioaccessibility, mobility and environmental risk of organic contaminants while sorbed to BC in soil and sediment, in addition to the inherent toxicity of BC itself to terrestrial flora and fauna. We review both the processes involved in and factors influencing BC sorption characteristics, and ultimately consider the impacts BC will have for bioavailability/bioaccessibility, toxicity and risk assessment/remediation of contaminated land. We conclude that while the application of BC is promising, additional work on both their toxicity effects and long-term stability is required before their full potential as a remediation agent can be safely exploited. Copyright © 2013 Elsevier B.V. All rights reserved.
Recruiting Underserved Mothers to Medical Research: Findings from North Carolina
Spears, Chaya R.; Sandberg, Joanne C.; O’Neill, Jenna L.; Grzywacz, Joseph G.; Howard, Timothy D.; Feldman, Steven R.; Arcury, Thomas A.
2014-01-01
Representative samples are required for ethical, valid, and useful health research. Yet, recruiting participants, especially from historically underserved communities, can be challenging. This paper presents findings from in-depth interviews with 40 mothers about factors that might influence their willingness to participate or allow their children to participate in medical research. Saliency analysis organizes the findings. Frequent and important salient themes about research participation included concerns that it might cause participants harm, hope that participants might gain a health benefit, and recognition that time and transportation resources could limit participation. Ultimately, we propose that a theoretical model, such as the Theory of Planned Behavior (TPB), will facilitate more systematic evaluation of effective methods for recruitment and retention of participants in medical research. Future research should explore the utility of such a model for development of effective recruitment and retention strategies. PMID:24185171
Multiple-mouse MRI with multiple arrays of receive coils.
Ramirez, Marc S; Esparza-Coss, Emilio; Bankson, James A
2010-03-01
Compared to traditional single-animal imaging methods, multiple-mouse MRI has been shown to dramatically improve imaging throughput and reduce the potentially prohibitive cost for instrument access. To date, up to a single radiofrequency coil has been dedicated to each animal being simultaneously scanned, thus limiting the sensitivity, flexibility, and ultimate throughput. The purpose of this study was to investigate the feasibility of multiple-mouse MRI with a phased-array coil dedicated to each animal. A dual-mouse imaging system, consisting of a pair of two-element phased-array coils, was developed and used to achieve acceleration factors greater than the number of animals scanned at once. By simultaneously scanning two mice with a retrospectively gated cardiac cine MRI sequence, a 3-fold acceleration was achieved with signal-to-noise ratio in the heart that is equivalent to that achieved with an unaccelerated scan using a commercial mouse birdcage coil. (c) 2010 Wiley-Liss, Inc.
Modelling clinical systemic lupus erythematosus: similarities, differences and success stories
Celhar, Teja
2017-01-01
Abstract Mouse models of SLE have been indispensable tools to study disease pathogenesis, to identify genetic susceptibility loci and targets for drug development, and for preclinical testing of novel therapeutics. Recent insights into immunological mechanisms of disease progression have boosted a revival in SLE drug development. Despite promising results in mouse studies, many novel drugs have failed to meet clinical end points. This is probably because of the complexity of the disease, which is driven by polygenic predisposition and diverse environmental factors, resulting in a heterogeneous clinical presentation. Each mouse model recapitulates limited aspects of lupus, especially in terms of the mechanism underlying disease progression. The main mouse models have been fairly successful for the evaluation of broad-acting immunosuppressants. However, the advent of targeted therapeutics calls for a selection of the most appropriate model(s) for testing and, ultimately, identification of patients who will be most likely to respond. PMID:28013204
New Tools For Understanding Microbial Diversity Using High-throughput Sequence Data
NASA Astrophysics Data System (ADS)
Knight, R.; Hamady, M.; Liu, Z.; Lozupone, C.
2007-12-01
High-throughput sequencing techniques such as 454 are straining the limits of tools traditionally used to build trees, choose OTUs, and perform other essential sequencing tasks. We have developed a workflow for phylogenetic analysis of large-scale sequence data sets that combines existing tools, such as the Arb phylogeny package and the NAST multiple sequence alignment tool, with new methods for choosing and clustering OTUs and for performing phylogenetic community analysis with UniFrac. This talk discusses the cyberinfrastructure we are developing to support the human microbiome project, and the application of these workflows to analyze very large data sets that contrast the gut microbiota with a range of physical environments. These tools will ultimately help to define core and peripheral microbiomes in a range of environments, and will allow us to understand the physical and biotic factors that contribute most to differences in microbial diversity.
Software Certification and Software Certificate Management Systems
NASA Technical Reports Server (NTRS)
Denney, Ewen; Fischer, Bernd
2005-01-01
Incremental certification and re-certification of code as it is developed and modified is a prerequisite for applying modem, evolutionary development processes, which are especially relevant for NASA. For example, the Columbia Accident Investigation Board (CAIB) report 121 concluded there is "the need for improved and uniform statistical sampling, audit, and certification processes". Also, re-certification time has been a limiting factor in making changes to Space Shuttle code close to launch time. This is likely to be an even bigger problem with the rapid turnaround required in developing NASA s replacement for the Space Shuttle, the Crew Exploration Vehicle (CEV). Hence, intelligent development processes are needed which place certification at the center of development. If certification tools provide useful information, such as estimated time and effort, they are more likely to be adopted. The ultimate impact of such a tool will be reduced effort and increased reliability.
Mask roughness induced LER: a rule of thumb -- paper
DOE Office of Scientific and Technical Information (OSTI.GOV)
McClinton, Brittany; Naulleau, Patrick
2010-03-12
Much work has already been done on how both the resist and line-edge roughness (LER) on the mask affect the final printed LER. What is poorly understood, however, is the extent to which system-level effects such as mask surface roughness, illumination conditions, and defocus couple to speckle at the image plane, and currently factor into LER limits. Here, we propose a 'rule-of-thumb' simplified solution that provides a fast and powerful method to obtain mask roughness induced LER. We present modeling data on an older generation mask with a roughness of 230 pm as well as the ultimate target roughness ofmore » 50 pm. Moreover, we consider feature sizes of 50 nm and 22 nm, and show that as a function of correlation length, the LER peaks at the condition that the correlation length is approximately equal to the resolution of the imaging optic.« less
Multilevel Analysis of Neighborhood Characteristics and Prostate Cancer
2012-09-01
widely by a number of key factors that may influence one’s well-being, stress level, lifestyle , and ultimately, disease susceptibility. These factors...outcomes, our work is helping to identify many neighborhood affects on prostate cancer, which include SES and lifestyle factors. The mechanisms of...Charnita Zeigler-Johnson 5d. PROJECT NUMBER 5e. TASK NUMBER E-Mail: czj@mail.med.upenn.edu 5f. WORK UNIT NUMBER 7. PERFORMING
NASA Technical Reports Server (NTRS)
1985-01-01
Typical R&D limited partnership arrangements, advantages and disadvantages of R&D limited partnership (RDLPs) and antitrust and tax implications are described. A number of typical forms of RDLPs are described that may be applicable for use in stimulating R&D and experimental programs using the advanced communications technology satellite. The ultimate goal is to increase the rate of market penetration of goods and/or services based upon advanced satellite communications technology. The conditions necessary for these RDLP forms to be advantageous are outlined.
Human factors aspects of lightplane safety.
DOT National Transportation Integrated Search
1963-12-01
This paper attempts to relate aircraft accident investigation and aeromedical research efforts for the purpose of clarifying research needs. Such efforts ultimately can lead to a reduction on lightplane accidents, injuries, and fatalities. Recent sta...
Replication Stress: A Lifetime of Epigenetic Change
Khurana, Simran; Oberdoerffer, Philipp
2015-01-01
DNA replication is essential for cell division. Challenges to the progression of DNA polymerase can result in replication stress, promoting the stalling and ultimately collapse of replication forks. The latter involves the formation of DNA double-strand breaks (DSBs) and has been linked to both genome instability and irreversible cell cycle arrest (senescence). Recent technological advances have elucidated many of the factors that contribute to the sensing and repair of stalled or broken replication forks. In addition to bona fide repair factors, these efforts highlight a range of chromatin-associated changes at and near sites of replication stress, suggesting defects in epigenome maintenance as a potential outcome of aberrant DNA replication. Here, we will summarize recent insight into replication stress-induced chromatin-reorganization and will speculate on possible adverse effects for gene expression, nuclear integrity and, ultimately, cell function. PMID:26378584
Telomeres and replicative senescence: Is it only length that counts?
von Zglinicki, T
2001-07-26
Telomeres are well established as a major 'replicometer', counting the population doublings in primary human cell cultures and ultimately triggering replicative senescence. However, neither is the pace of this biological clock inert, nor is there a fixed threshold telomere length acting as the universal trigger of replicative senescence. The available data suggest that opening of the telomeric loop and unscheduled exposure of the single-stranded G-rich telomeric overhang might act like a semaphore to signal senescent cell cycle arrest. Short telomere length, telomeric single-strand breaks, low levels of loop-stabilizing proteins, or other factors may trigger this opening of the loop. Thus, both telomere shortening and the ultimate signalling into senescence are able to integrate different environmental and genetic factors, especially oxidative stress-mediated damage, which might otherwise become a thread to genomic stability.
Automotive Stirling engine Market and Industrial Readiness Program (MIRP), phase 1
NASA Astrophysics Data System (ADS)
1982-05-01
A program, begun in 1978, has the goal of transferring Stirling engine technology from United Stirling of Sweden to the US and, then, following design, fabrication, and prototype testing, to secure US manufacturers for the engine. The ultimate objective is the large-scale commercial use of the Automotive Stirling Engine (ASE) by the year 2000. The fist phase of the Market and Industrial Readiness Program for the ASE was concerned with defining the market, product, economic and technical factors necessary to be addressed to assure a reasonable chance of ultimate commercial acceptance. Program results for this first phase are reported and discussed. These results pertain to licensing strategy development, economic analysis, market factors, product planning, market growth, cost studies, and engine performance as measured by fuel economy using conventional fuels and by vehicle speed and acceleration characteristics.
Factors affecting adoption and implementation of AHRQ health literacy tools in pharmacies.
Shoemaker, Sarah J; Staub-DeLong, Leah; Wasserman, Melanie; Spranca, Mark
2013-01-01
Pharmacies are key sources of medication information for patients, yet few effectively serve patients with low health literacy. The Agency for Healthcare Research and Quality (AHRQ) supported the development of four health literacy tools for pharmacists to address this problem, and to help assess and improve pharmacies' health literacy practices. This study aimed to understand the facilitators and barriers to the adoption and implementation of AHRQ's health literacy tools, particularly a tool to assess a pharmacy's health literacy practices. We conducted a comparative, multiple-case study of eight pharmacies, guided by an adaptation of Rogers's Diffusion of Innovations model. Data were collected and triangulated through interviews, site visit observations, and the review of documents, and analyzed on the factors affecting pharmacies' adoption decisions and implementation of the tools. Factors important to pharmacies' decision to adopt the health literacy tools included awareness of health literacy; a culture of innovation; a change champion; the relative advantage and compatibility of the tools; and an invitation to utilize and receive support to use the tools. The barriers included a lack of leadership support, limited staff time, and a perception of the tools as complex with limited value. For implementation, the primary facilitators were buy-in from leadership, qualified staff, college-affiliated change champions, the adaptability and organization of the tool, and support. Barriers to implementation were limited leadership buy-in, prioritization of other activities, lack of qualified staff, and tool complexity. If pharmacists are provided tools that could ultimately improve their health literacy practices and patient-centered services; and the tools have a clear relative advantage, are simple as well adaptable, and the pharmacists are supported in their efforts - either by colleagues or by collaborating with colleges of pharmacy-then there could be important progress toward achieving the goals of the National Action Plan for Health Literacy. Copyright © 2013 Elsevier Inc. All rights reserved.
Analysis of rainfall-induced slope instability using a field of local factor of safety
Lu, Ning; Şener-Kaya, Başak; Wayllace, Alexandra; Godt, Jonathan W.
2012-01-01
Slope-stability analyses are mostly conducted by identifying or assuming a potential failure surface and assessing the factor of safety (FS) of that surface. This approach of assigning a single FS to a potentially unstable slope provides little insight on where the failure initiates or the ultimate geometry and location of a landslide rupture surface. We describe a method to quantify a scalar field of FS based on the concept of the Coulomb stress and the shift in the state of stress toward failure that results from rainfall infiltration. The FS at each point within a hillslope is called the local factor of safety (LFS) and is defined as the ratio of the Coulomb stress at the current state of stress to the Coulomb stress of the potential failure state under the Mohr-Coulomb criterion. Comparative assessment with limit-equilibrium and hybrid finite element limit-equilibrium methods show that the proposed LFS is consistent with these approaches and yields additional insight into the geometry and location of the potential failure surface and how instability may initiate and evolve with changes in pore water conditions. Quantitative assessments applying the new LFS field method to slopes under infiltration conditions demonstrate that the LFS has the potential to overcome several major limitations in the classical FS methodologies such as the shape of the failure surface and the inherent underestimation of slope instability. Comparison with infinite-slope methods, including a recent extension to variably saturated conditions, shows further enhancement in assessing shallow landslide occurrence using the LFS methodology. Although we use only a linear elastic solution for the state of stress with no post-failure analysis that require more sophisticated elastoplastic or other theories, the LFS provides a new means to quantify the potential instability zones in hillslopes under variably saturated conditions using stress-field based methods.
Cryogen-free heterodyne-enhanced mid-infrared Faraday rotation spectrometer
Wang, Yin; Nikodem, Michal; Wysocki, Gerard
2013-01-01
A new detection method for Faraday rotation spectra of paramagnetic molecular species is presented. Near shot-noise limited performance in the mid-infrared is demonstrated using a heterodyne enhanced Faraday rotation spectroscopy (H-FRS) system without any cryogenic cooling. Theoretical analysis is performed to estimate the ultimate sensitivity to polarization rotation for both heterodyne and conventional FRS. Sensing of nitric oxide (NO) has been performed with an H-FRS system based on thermoelectrically cooled 5.24 μm quantum cascade laser (QCL) and a mercury-cadmium-telluride photodetector. The QCL relative intensity noise that dominates at low frequencies is largely avoided by performing the heterodyne detection in radio frequency range. H-FRS exhibits a total noise level of only 3.7 times the fundamental shot noise. The achieved sensitivity to polarization rotation of 1.8 × 10−8 rad/Hz1/2 is only 5.6 times higher than the ultimate theoretical sensitivity limit estimated for this system. The path- and bandwidth-normalized NO detection limit of 3.1 ppbv-m/Hz1/2 was achieved using the R(17/2) transition of NO at 1906.73 cm−1. PMID:23388967
Bahoura, Messaoud; Clairon, André
2003-11-01
We report a theoretical dynamical analysis on effect of semiconductor laser phase noise on the achievable linewidth when locked to a Fabry-Pérot cavity fringe using a modulation-demodulation frequency stabilization technique such as the commonly used Pound-Drever-Hall frequency locking scheme. We show that, in the optical domain, the modulation-demodulation operation produces, in the presence of semiconductor laser phase noise, two kinds of excess noise, which could be much above the shot noise limit, namely, conversion noise (PM-to-AM) and intermodulation noise. We show that, in typical stabilization conditions, the ultimate semiconductor laser linewidth reduction can be severely limited by the intermodulation excess noise. The modulation-demodulation operation produces the undesirable nonlinear intermodulation effect through which the phase noise spectral components of the semiconductor laser, in the vicinity of even multiples of the modulation frequency, are downconverted into the bandpass of the frequency control loop. This adds a spurious signal, at the modulation frequency, to the error signal and limits the performance of the locked semiconductor laser. This effect, reported initially in the microwave domain using the quasistatic approximation, can be considerably reduced by a convenient choice of the modulation frequency.
Hoppe, H; Messmann, S; Giga, A; Grüning, H
2009-01-01
In some cities, industrial enterprises' discharges into municipal sewage systems have a major impact on the quantity and quality of inflows to the municipal treatment plants. In many cases, industrial discharges stand out on account of the great fluctuations in their volumetric rates of flow, pollution loads and temperatures. As a result, these discharges put a great strain on the sewage system, the treatment plant, and ultimately the receiving waters. The enterprises concerned have to pay the treatment plant operators fees based on the load and/or volume discharged. In most cases, qualitative monitoring operations merely consist of spot checks. This means that continuously surveillance is not possible and infringements of the permissible limit values are only discovered by accident. If impermissible discharges are carried out that may be susceptible to causing a treatment plant failure, the rapid initiation of countermeasures is not possible. Hence, spectrometer probes and mobile flowmeters were used in order to determine volumetric rates of flow, COD concentrations, and ultimately the loads discharged. The possibilities for, and limits to, online monitoring as well as shortcomings of spot-checks are discussed in the course of this paper, which also includes an uncertainty analysis.
Salmonid behavior and water temperature
Sally T. Sauter; John McMillan; Jason B. Dunham
2001-01-01
Animals react not only to immediate changes in their environment but also to cues that signal long-term changes to which they must adapt to survive. A proximate factor stimulates an animalâs immediate behavioral response, whereas what is known as an ultimate factor causes an animal to adjust its behavior to evolving conditions, thereby increasing its fitness and...
A goal of this research is to investigate the interacting characteristics of biota and abiotic conditions relative to nitrogen cycling in the ecosystem. The research will support development of nitrogen cycling models with an ultimate application directed towards identification ...
PURIFICATION AND RECOVERY OF BULKY HYDROPHOBIC DNA ADDUCTS
For many years 32P postlabeling has detected DNA adducts at very low levels and yet has not been able to identify unknown adducts. Mass spectrometry offers substantially improved identification powers, albeit at some loss in detection limits. With this ultimate utilization of ma...
Are Zeros Your Ultimate Weapon?
ERIC Educational Resources Information Center
Guskey, Thomas R.
2004-01-01
Grading is one of a teacher's greatest challenges and most important professional responsibilities. However, few teachers have any formal training in grading methods, and most teachers have limited knowledge about the effectiveness of various grading practices. As a consequence, when teachers develop their grading policies, they typically reflect…
Kingma, Sjouke A.; Bebbington, Kat; Hammers, Martijn; Richardson, David S.; Komdeur, Jan
2016-01-01
Why sexually mature individuals stay in groups as nonreproductive subordinates is central to the evolution of sociality and cooperative breeding. To understand such delayed dispersal, its costs and benefits need to be compared with those of permanently leaving to float through the population. However, comprehensive comparisons, especially regarding differences in future breeding opportunities, are rare. Moreover, extraterritorial prospecting by philopatric individuals has generally been ignored, even though the factors underlying this route to independent breeding may differ from those of strict philopatry or floating. We use a comprehensive predictive framework to explore how various costs, benefits and intrinsic, environmental and social factors explain philopatry, prospecting, and floating in Seychelles warblers (Acrocephalus sechellensis). Not only floaters more likely obtained an independent breeding position before the next season than strictly philopatric individuals, but also suffered higher mortality. Prospecting yielded similar benefits to floating but lower mortality costs, suggesting that it is overall more beneficial than floating and strict philopatry. While prospecting is probably individual‐driven, although limited by resource availability, floating likely results from eviction by unrelated breeders. Such differences in proximate and ultimate factors underlying each route to independent breeding highlight the need for simultaneous consideration when studying the evolution of delayed dispersal. PMID:27641712
Puckett, Jae A; Newcomb, Michael E; Ryan, Daniel T; Swann, Greg; Garofalo, Robert; Mustanski, Brian
2017-03-01
Young men who have sex with men (YMSM) experience minority stressors that impact their mental health, substance use, and sexual risk behaviors. Internalized homophobia (IH) and perceived stigma represent two of these minority stressors, and there has been limited research empirically validating measures of these constructs. We validated measures of IH and perceived stigma with a sample of 450 YMSM (mean age=18.9) and a sample of 370 YMSM (mean age=22.9). Results from exploratory and confirmatory factor analyses supported modifications to the IH and perceived stigma scales, ultimately revealing a three factor and one factor structure, respectively. Convergent and discriminant validity were examined utilizing correlations between IH, perceived stigma, and other variables related to minority stress (e.g., victimization). We evaluated predictive validity by examining relations with mental health, substance use, and risky sexual behaviors measured 12-months from baseline. There were mixed findings for IH, with subscales varying in their relations to mental health, drinking, and sexual risk variables. Perceived stigma was not related to mental health or substance use, but was associated with greater prevalence of STIs. Findings supported the use of these modified scales with YMSM and highlight the need for further measurement studies.
Puckett, Jae A.; Newcomb, Michael E.; Ryan, Daniel T.; Swann, Greg; Garofalo, Robert; Mustanski, Brian
2017-01-01
Young men who have sex with men (YMSM) experience minority stressors that impact their mental health, substance use, and sexual risk behaviors. Internalized homophobia (IH) and perceived stigma represent two of these minority stressors, and there has been limited research empirically validating measures of these constructs. We validated measures of IH and perceived stigma with a sample of 450 YMSM (mean age=18.9) and a sample of 370 YMSM (mean age=22.9). Results from exploratory and confirmatory factor analyses supported modifications to the IH and perceived stigma scales, ultimately revealing a three factor and one factor structure, respectively. Convergent and discriminant validity were examined utilizing correlations between IH, perceived stigma, and other variables related to minority stress (e.g., victimization). We evaluated predictive validity by examining relations with mental health, substance use, and risky sexual behaviors measured 12-months from baseline. There were mixed findings for IH, with subscales varying in their relations to mental health, drinking, and sexual risk variables. Perceived stigma was not related to mental health or substance use, but was associated with greater prevalence of STIs. Findings supported the use of these modified scales with YMSM and highlight the need for further measurement studies. PMID:28824733
A simulation study of control and display requirements for zero-experience general aviation pilots
NASA Technical Reports Server (NTRS)
Stewart, Eric C.
1993-01-01
The purpose of this simulation study was to define the basic human factor requirements for operating an airplane in all weather conditions. The basic human factors requirements are defined as those for an operator who is a complete novice for airplane operations but who is assumed to have automobile driving experience. These operators thus have had no piloting experience or training of any kind. The human factor requirements are developed for a practical task which includes all of the basic maneuvers required to go from one airport to another airport in limited visibility conditions. The task was quite demanding including following a precise path with climbing and descending turns while simultaneously changing airspeed. The ultimate goal of this research is to increase the utility of general aviation airplanes - that is, to make them a practical mode of transportation for a much larger segment of the general population. This can be accomplished by reducing the training and proficiency requirements of pilots while improving the level of safety. It is believed that advanced technologies such as fly-by-wire (or light), and head-up pictorial displays can be of much greater benefit to the general aviation pilot than to the full-time, professional pilot.
Choosing Psychiatry as a Career: Motivators and Deterrents at a Critical Decision-Making Juncture
Wiesenfeld, Lesley; Abbey, Susan; Takahashi, Sue Glover; Abrahams, Caroline
2014-01-01
Objective To examine factors influencing the choice of psychiatry as a career between residency program application and ranking decision making. Methods: Using an online questionnaire, applicants to the largest Canadian psychiatry residency program were surveyed about the impact of various factors on their ultimate decision to enter psychiatry residency training. Results: Applicants reported that patient-related stigma was a motivator in considering psychiatry as a career, but that negative comments from colleagues, friends, and family about choosing psychiatry was a deterrent. Training program length, limited treatments, and insufficient clerkship exposure were noted as deterrents to choosing psychiatry, though future job prospects, the growing role of neuroscience, and diagnostic complexity positively influenced choosing psychiatry as a specialty. Research and elective time away opportunities were deemed relatively unimportant to ranking decisions, compared with more highly weighted factors, such as program flexibility, emphasis on psychotherapy, service– training balance, and training program location. Most applicants also reported continuing to fine tune ranking decisions between the application and ranking submission deadline. Conclusions: Stigma, exposure to psychiatry, diagnostic complexity, and an encouraging job market were highlighted as positive influences on the choice to enter psychiatry residency. Interview and information days represent opportunities for continued targeted recruitment activity for psychiatry residency programs. PMID:25161070
Human iPSC-Derived Endothelial Cell Sprouting Assay in ...
Activation of vascular endothelial cells (ECs) by growth factors initiates a cascade of events in vivo consisting of EC tip cell selection, sprout formation, EC stalk cell proliferation, and ultimately vascular stabilization by support cells. Although EC functional assays can recapitulate one or more aspects of angiogenesis in vitro, they are often limited by a lack of definition to the substratum and lack of dependence on key angiogenic signaling axes. Here, we designed and characterized a chemically-defined model of endothelial sprouting behavior in vitro using human induced pluripotent stem cell-derived endothelial cells (iPSC-ECs). Thiol-ene photopolymerization was used to rapidly encapsulate iPSC-ECs at high density in poly(ethylene glycol) (PEG) hydrogel spheres and subsequently to rapidly encapsulate iPSC-EC-containing hydrogel spheres in a cell-free over-layer. The hydrogel sprouting array here maintained pro-angiogenic phenotype of iPSC-ECs and supported growth factor-dependent proliferation and sprouting behavior. The sprouting model responded appropriately to several reference pharmacological angiogenesis inhibitors, which suggests the functional role of vascular endothelial growth factor, NF-κB, matrix metalloproteinase-2/9, protein kinase activity, and β-tubulin in endothelial sprouting. A blinded screen of 38 putative vascular disrupting compounds (pVDCs) from the US Environmental Protection Agency’s ToxCast library identified five compounds th
Rating educational quality: factors in the erosion of professional standards.
Albanese, M
1999-06-01
Changes in the health care environment are putting increasing pressure on medical schools to make faculty accountable and to document the quality of the medical education they provide. Faculty's ratings of students' performances and students' ratings of faculty's teaching are important elements in these efforts to document educational quality. This article discusses selected research related to factors affecting raters' judgments, analyzes how changes in the health care environment are influencing such judgments, and links these influences to the system that upholds professional standards. Ratings are known to have a positive bias (generosity error), provide limited discrimination, and often fail to document serious deficits. The potential sources of these problems relate to the mechanics of the rating task, the system used to obtain ratings, and factors affecting rater judgment. As managed care demands reduce the time faculty have for teaching, as system-wide disincentives to provide negative ratings proliferate, and as social engineering challenges, such as the Americans with Disabilities Act, impose differential standards for students, the natural tendency to avoid giving negative ratings becomes even harder to resist. Ultimately, these forces compromise the capability of faculty to uphold the standards of the profession. The author calls for a national effort to stem the erosion of those standards.
Fagan, Peter J; Wise, Thomas N; Schmidt, Chester W; Berlin, Fred S
2002-11-20
This article addresses the risk factors associated with the psychiatric disorder pedophilia, its treatment, and treatment outcomes. It addresses physician responsibilities associated with case identification of victims and possible roles in the medical management of pedophilia. The essential feature of pedophilia is that an individual is sexually attracted exclusively or in part to prepubescent children. While pedophilia may be limited to fantasies and impulses, pedophilic behaviors are the primary concern of both the mental health and criminal justice systems. Remote risk factors for development of pedophilia often include the individual having been sexually abused as a child. Proximate risk factors for its behavioral expression are prevalence of comorbid psychiatric disorders and substance abuse disorders. Current treatment goals focus on stopping the behavior and achieving long-term behavioral control in the community. Common treatment methods are cognitive-behavioral, group therapy, and, when appropriate, medications such as androgen-lowering agents that can act as sexual appetite suppressants. Meta-analyses have established that treatment is more effective than nontreatment in preventing recidivism of sexual offenders in general, a finding that has a high probability of application to individuals with pedophilia. Pedophilia is a chronic psychiatric disorder, but it is treatable in terms of developing strategies for preventing behavioral expression. Ultimately, reducing the prevalence of pedophilic behavior requires further collaboration between the criminal justice system and the health care communities.
Jayakumar, Asha; Donovan, Michael J.; Tripathi, Vinita; Ramalho-Ortigao, Marcelo; McDowell, Mary Ann
2008-01-01
The salient feature of dendritic cells (DC) is the initiation of appropriate adaptive immune responses by discriminating between pathogens. Using a prototypic model of intracellular infection, we previously showed that Leishmania major parasites prime human DC for efficient interleukin-12 (IL-12) secretion. L. major infection is associated with self-limiting cutaneous disease and powerful immunity. In stark contrast, the causative agent of visceral leishmaniasis, Leishmania donovani, does not prime human DC for IL-12 production. Here, we report that DC priming by L. major infection results in the early activation of NF-κB transcription factors and the up-regulation and nuclear translocation of interferon regulatory factor 1 (IRF-1) and IRF-8. The inhibition of NF-κB activation by the pretreatment of DC with caffeic acid phenethyl ester blocks L. major-induced IRF-1 and IRF-8 activation and IL-12 expression. We further demonstrate that IRF-1 and IRF-8 obtained from L. major-infected human DC specifically bind to their consensus binding sites on the IL-12p35 promoter, indicating that L. major infection either directly stimulates a signaling cascade or induces an autocrine pathway that activates IRF-1 and IRF-8, ultimately resulting in IL-12 transcription. PMID:18316378
Enhanced magnetic anisotropies of single transition-metal adatoms on a defective MoS2 monolayer.
Cong, W T; Tang, Z; Zhao, X G; Chu, J H
2015-03-23
Single magnetic atoms absorbed on an atomically thin layer represent the ultimate limit of bit miniaturization for data storage. To approach the limit, a critical step is to find an appropriate material system with high chemical stability and large magnetic anisotropic energy. Here, on the basis of first-principles calculations and the spin-orbit coupling theory, it is elucidated that the transition-metal Mn and Fe atoms absorbed on disulfur vacancies of MoS2 monolayers are very promising candidates. It is analysed that these absorption systems are of not only high chemical stabilities but also much enhanced magnetic anisotropies and particularly the easy magnetization axis is changed from the in-plane one for Mn to the out-of-plane one for Fe by a symmetry-lowering Jahn-Teller distortion. The results point out a promising direction to achieve the ultimate goal of single adatomic magnets with utilizing the defective atomically thin layers.
NASA Astrophysics Data System (ADS)
Allen, Micah
2018-03-01
In Isaac Asimov's science fiction classic, Foundation, fictional mathematician Hari Seldon applies his theory of psychohistory, a synthesis of psychology, history, and statistical physics, to predict that humanity will suffer a dark age lasting thirty millennia [1]. Although Seldon's psychohistory successfully predicts the future of human society, its basis in the physical law of mass action carries a limitation - it can only do so for sufficiently massive populations (i.e., billions of individuals), rendering it inert at an individual level. This limitation is of course a key source of dramatic tension in the series, in which the individual characters of Asimov's universe grapple with the challenges inherent to applying a lawlike theory of collective action to the constitutive individuals. To avert crisis, Seldon ultimately assembles the namesake Foundation, an interdisciplinary, intergalactic research centre bringing together various biological, physical, and social scientists who ultimately attempt to alter the predicted course of history.
Stochastic production phase design for an open pit mining complex with multiple processing streams
NASA Astrophysics Data System (ADS)
Asad, Mohammad Waqar Ali; Dimitrakopoulos, Roussos; van Eldert, Jeroen
2014-08-01
In a mining complex, the mine is a source of supply of valuable material (ore) to a number of processes that convert the raw ore to a saleable product or a metal concentrate for production of the refined metal. In this context, expected variation in metal content throughout the extent of the orebody defines the inherent uncertainty in the supply of ore, which impacts the subsequent ore and metal production targets. Traditional optimization methods for designing production phases and ultimate pit limit of an open pit mine not only ignore the uncertainty in metal content, but, in addition, commonly assume that the mine delivers ore to a single processing facility. A stochastic network flow approach is proposed that jointly integrates uncertainty in supply of ore and multiple ore destinations into the development of production phase design and ultimate pit limit. An application at a copper mine demonstrates the intricacies of the new approach. The case study shows a 14% higher discounted cash flow when compared to the traditional approach.
Wall roughness induces asymptotic ultimate turbulence
NASA Astrophysics Data System (ADS)
Zhu, Xiaojue; Verschoof, Ruben A.; Bakhuis, Dennis; Huisman, Sander G.; Verzicco, Roberto; Sun, Chao; Lohse, Detlef
2018-04-01
Turbulence governs the transport of heat, mass and momentum on multiple scales. In real-world applications, wall-bounded turbulence typically involves surfaces that are rough; however, characterizing and understanding the effects of wall roughness on turbulence remains a challenge. Here, by combining extensive experiments and numerical simulations, we examine the paradigmatic Taylor-Couette system, which describes the closed flow between two independently rotating coaxial cylinders. We show how wall roughness greatly enhances the overall transport properties and the corresponding scaling exponents associated with wall-bounded turbulence. We reveal that if only one of the walls is rough, the bulk velocity is slaved to the rough side, due to the much stronger coupling to that wall by the detaching flow structures. If both walls are rough, the viscosity dependence is eliminated, giving rise to asymptotic ultimate turbulence—the upper limit of transport—the existence of which was predicted more than 50 years ago. In this limit, the scaling laws can be extrapolated to arbitrarily large Reynolds numbers.
The ultimate limits of the relativistic rocket equation. The Planck photon rocket
NASA Astrophysics Data System (ADS)
Haug, Espen Gaarder
2017-07-01
In this paper we look at the ultimate limits of a photon propulsion rocket. The maximum velocity for a photon propulsion rocket is just below the speed of light and is a function of the reduced Compton wavelength of the heaviest subatomic particles in the rocket. We are basically combining the relativistic rocket equation with Haug's new insight on the maximum velocity for anything with rest mass. An interesting new finding is that in order to accelerate any subatomic "fundamental" particle to its maximum velocity, the particle rocket basically needs two Planck masses of initial load. This might sound illogical until one understands that subatomic particles with different masses have different maximum velocities. This can be generalized to large rockets and gives us the maximum theoretical velocity of a fully-efficient and ideal rocket. Further, no additional fuel is needed to accelerate a Planck mass particle to its maximum velocity; this also might sound absurd, but it has a very simple and logical solution that is explained in this paper.
Probing the ultimate plasmon confinement limits with a van der Waals heterostructure.
Alcaraz Iranzo, David; Nanot, Sébastien; Dias, Eduardo J C; Epstein, Itai; Peng, Cheng; Efetov, Dmitri K; Lundeberg, Mark B; Parret, Romain; Osmond, Johann; Hong, Jin-Yong; Kong, Jing; Englund, Dirk R; Peres, Nuno M R; Koppens, Frank H L
2018-04-20
The ability to confine light into tiny spatial dimensions is important for applications such as microscopy, sensing, and nanoscale lasers. Although plasmons offer an appealing avenue to confine light, Landau damping in metals imposes a trade-off between optical field confinement and losses. We show that a graphene-insulator-metal heterostructure can overcome that trade-off, and demonstrate plasmon confinement down to the ultimate limit of the length scale of one atom. This is achieved through far-field excitation of plasmon modes squeezed into an atomically thin hexagonal boron nitride dielectric spacer between graphene and metal rods. A theoretical model that takes into account the nonlocal optical response of both graphene and metal is used to describe the results. These ultraconfined plasmonic modes, addressed with far-field light excitation, enable a route to new regimes of ultrastrong light-matter interactions. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.
Ultimate Osmosis Engineered by the Pore Geometry and Functionalization of Carbon Nanostructures
Song, Zhigong; Xu, Zhiping
2015-01-01
Osmosis is the key process in establishing versatile functions of cellular systems and enabling clean-water harvesting technologies. Membranes with single-atom thickness not only hold great promises in approaching the ultimate limit of these functions, but also offer an ideal test-bed to explore the underlying physical mechanisms. In this work, we explore diffusive and osmotic transport of water and ions through carbon nanotube and porous graphene based membranes by performing molecular dynamics simulations. Our comparative study shows that the cylindrical confinement in carbon nanotubes offers much higher salt rejection at similar permeability in osmosis compared to porous graphene. Moreover, chemical functionalization of the pores modulates the membrane performance by its steric and electrostatic nature, especially at small-size pores due to the fact that the optimal transport is achieved by ordered water transport near pore edges. These findings lay the ground for the ultimate design of forward osmosis membranes with optimized performance trade-off, given the capability of nano-engineering nanostructures by their geometry and chemistry. PMID:26037602
Sampson, John H.; Archer, Gary E.; Mitchell, Duane A.; Heimberger, Amy B.; Herndon, James E.; Lally-Goss, Denise; McGehee-Norman, Sharon; Paolino, Alison; Reardon, David A.; Friedman, Allan H.; Friedman, Henry S.; Bigner, Darell D.
2010-01-01
Conventional therapies for glioblastoma multiforme (GBM) fail to target tumor cells exclusively, such that their efficacyis ultimately limited by nonspecific toxicity. Immunologic targeting of tumor-specific gene mutations, however, may allow more precise eradication of neoplastic cells. The epidermal growth factor receptor variant III (EGFRvIII) is a consistent and tumor-specific mutation widely expressed in GBMs and other neoplasms. The safety and immunogenicity of a dendritic cell (DC)–based vaccine targeting the EGFRvIII antigen was evaluated in this study. Adults with newly diagnosed GBM, who had undergone gross-total resection and standard conformal external beam radiotherapy, received three consecutive intradermal vaccinations with autologous mature DCs pulsed with an EGFRvIII-specific peptide conjugated to keyhole limpet hemocyanin. The dose of DCs was escalated in cohorts of three patients. Patients were monitored for toxicity, immune response, radiographic and clinical progression, and death. No allergic reactions or serious adverse events were seen. Adverse events were limited to grade 2 toxicities. The maximum feasible dose of antigen-pulsed mature DCs was reached at 5.7 × 107 ± 2.9 × 107 SD without dose-limiting toxicity. EGFRvIII-specific immune responses were evident in most patients. The mean time from histologic diagnosis to vaccination was 3.6 ± 0.6 SD months. Median time to progression from vaccination was 6.8 months [95% confidence interval (C.I.95), 2.5–8.8], and median survival time from vaccination was 18.7 months (C.I.95, 14.5–25.6). Overall median survival from time of histologic diagnosis was 22.8 months (C.I.95, 17.5–29). This study establishes the EGFRvIII mutation as a safe and immunogenic tumor-specific target for immunotherapy. PMID:19825799
Impact of measurement uncertainty from experimental load distribution factors on bridge load rating
NASA Astrophysics Data System (ADS)
Gangone, Michael V.; Whelan, Matthew J.
2018-03-01
Load rating and testing of highway bridges is important in determining the capacity of the structure. Experimental load rating utilizes strain transducers placed at critical locations of the superstructure to measure normal strains. These strains are then used in computing diagnostic performance measures (neutral axis of bending, load distribution factor) and ultimately a load rating. However, it has been shown that experimentally obtained strain measurements contain uncertainties associated with the accuracy and precision of the sensor and sensing system. These uncertainties propagate through to the diagnostic indicators that in turn transmit into the load rating calculation. This paper will analyze the effect that measurement uncertainties have on the experimental load rating results of a 3 span multi-girder/stringer steel and concrete bridge. The focus of this paper will be limited to the uncertainty associated with the experimental distribution factor estimate. For the testing discussed, strain readings were gathered at the midspan of each span of both exterior girders and the center girder. Test vehicles of known weight were positioned at specified locations on each span to generate maximum strain response for each of the five girders. The strain uncertainties were used in conjunction with a propagation formula developed by the authors to determine the standard uncertainty in the distribution factor estimates. This distribution factor uncertainty is then introduced into the load rating computation to determine the possible range of the load rating. The results show the importance of understanding measurement uncertainty in experimental load testing.
Ahmed, Amjad M; Hersi, Ahmad; Mashhoud, Walid; Arafah, Mohammed R; Abreu, Paula C; Al Rowaily, Mohammed Abdullah; Al-Mallah, Mouaz H
2017-10-01
Limited data exist on the epidemiology of cardiovascular risk factors in Saudi Arabia, particularly in relation to the differences between Saudi nationals and expatriates in Saudi Arabia. The aim of this analysis was to describe the current prevalence of cardiovascular risk factors among patients attending general practice clinics across Saudi Arabia. In this cross-sectional epidemiological analysis of the Africa Middle East Cardiovascular Epidemiological (ACE) study, the prevalence of cardiovascular risk factors (hypertension, diabetes, dyslipidemia, obesity, smoking, abdominal obesity) was evaluated in adults attending primary care clinics in Saudi Arabia. Group comparisons were made between patients of Saudi ethnicity (SA nationals) and patients who were not of Saudi ethnicity (expatriates). A total of 550 participants were enrolled from different clinics across Saudi Arabia [aged (mean ± standard deviation) 43 ± 11 years; 71% male]. Nearly half of the study cohort (49.8%) had more than three cardiovascular risk factors. Dyslipidemia was the most prevalent risk factor (68.6%). The prevalence of hypertension (47.5%) and dyslipidemia (75.5%) was higher among expatriates when compared with SA nationals (31.4% vs. 55.1%, p = 0.0003 vs. p < 0.0001, respectively). Conversely, obesity (52.6% vs. 41.0%; p = 0.008) and abdominal obesity (65.5% vs. 52.2%; p = 0.0028) were higher among SA nationals vs. expatriates. Modifiable cardiovascular risk factors are highly prevalent in SA nationals and expatriates. Programmed community-based screening is needed for all cardiovascular risk factors in Saudi Arabia. Improving primary care services to focus on risk factor control may ultimately decrease the incidence of coronary artery disease and improve overall quality of life. The ACE trial is registered under NCT01243138.
40 CFR 63.1252 - Standards: General.
Code of Federal Regulations, 2011 CFR
2011-07-01
... that does not ultimately allow for recycling of material back to the PMPU. (D) Any control device for... have no effect on the production-indexed consumption factor for the PMPU. (4) The owner or operator may...
40 CFR 63.1252 - Standards: General.
Code of Federal Regulations, 2012 CFR
2012-07-01
... that does not ultimately allow for recycling of material back to the PMPU. (D) Any control device for... have no effect on the production-indexed consumption factor for the PMPU. (4) The owner or operator may...
40 CFR 63.1252 - Standards: General.
Code of Federal Regulations, 2014 CFR
2014-07-01
... that does not ultimately allow for recycling of material back to the PMPU. (D) Any control device for... have no effect on the production-indexed consumption factor for the PMPU. (4) The owner or operator may...
40 CFR 63.1252 - Standards: General.
Code of Federal Regulations, 2010 CFR
2010-07-01
... that does not ultimately allow for recycling of material back to the PMPU. (D) Any control device for... have no effect on the production-indexed consumption factor for the PMPU. (4) The owner or operator may...
Fundamentals of Free-Space Optical Communications
NASA Technical Reports Server (NTRS)
Dolinar, Sam; Moision, Bruce; Erkmen, Baris
2012-01-01
Free-space optical communication systems potentially gain many dBs over RF systems. There is no upper limit on the theoretically achievable photon efficiency when the system is quantum-noise-limited: a) Intensity modulations plus photon counting can achieve arbitrarily high photon efficiency, but with sub-optimal spectral efficiency. b) Quantum-ideal number states can achieve the ultimate capacity in the limit of perfect transmissivity. Appropriate error correction codes are needed to communicate reliably near the capacity limits. Poisson-modeled noises, detector losses, and atmospheric effects must all be accounted for: a) Theoretical models are used to analyze performance degradations. b) Mitigation strategies derived from this analysis are applied to minimize these degradations.
Klimov, Victor I.; Baker, Thomas A.; Lim, Jaehoon; ...
2016-05-09
In this study, luminescent solar concentrators (LSCs) can be utilized as both large-area collectors of solar radiation supplementing traditional photovoltaic cells as well as semitransparent “solar windows” that provide a desired degree of shading and simultaneously serve as power-generation units. An important characteristic of an LSC is a concentration factor (C) that can be thought of as a coefficient of effective enlargement (or contraction) of the area of a solar cell when it is coupled to the LSC. Here we use analytical and numerical Monte Carlo modeling in addition to experimental studies of quantum-dot-based LSCs to analyze the factors thatmore » influence optical concentration in practical devices. Our theoretical model indicates that the maximum value of C achievable with a given fluorophore is directly linked to the LSC quality factor (Q LSC) defined as the ratio of absorption coefficients at the wavelengths of incident and reemitted light. In fact, we demonstrate that the ultimate concentration limit (C 0) realized in large-area devices scales linearly with the LSC quality factor and in the case of perfect emitters and devices without back reflectors is approximately equal to Q LSC. To test the predictions of this model, we conduct experimental studies of LSCs based on visible-light emitting II–VI core/shell quantum dots with two distinct LSC quality factors. We also investigate devices based on near-infrared emitting CuInSe xS 2–x quantum dots for which the large emission bandwidth allows us to assess the impact of varied Q LSC on the concentration factor by simply varying the detection wavelength. In all cases, we find an excellent agreement between the model and the experimental observations, suggesting that the developed formalism can be utilized for express evaluation of prospective LSC performance based on the optical spectra of LSC fluorophores, which should facilitate future efforts on the development of high-performance devices based on quantum dots as well as other types of emitters.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Klimov, Victor I.; Baker, Thomas A.; Lim, Jaehoon
In this study, luminescent solar concentrators (LSCs) can be utilized as both large-area collectors of solar radiation supplementing traditional photovoltaic cells as well as semitransparent “solar windows” that provide a desired degree of shading and simultaneously serve as power-generation units. An important characteristic of an LSC is a concentration factor (C) that can be thought of as a coefficient of effective enlargement (or contraction) of the area of a solar cell when it is coupled to the LSC. Here we use analytical and numerical Monte Carlo modeling in addition to experimental studies of quantum-dot-based LSCs to analyze the factors thatmore » influence optical concentration in practical devices. Our theoretical model indicates that the maximum value of C achievable with a given fluorophore is directly linked to the LSC quality factor (Q LSC) defined as the ratio of absorption coefficients at the wavelengths of incident and reemitted light. In fact, we demonstrate that the ultimate concentration limit (C 0) realized in large-area devices scales linearly with the LSC quality factor and in the case of perfect emitters and devices without back reflectors is approximately equal to Q LSC. To test the predictions of this model, we conduct experimental studies of LSCs based on visible-light emitting II–VI core/shell quantum dots with two distinct LSC quality factors. We also investigate devices based on near-infrared emitting CuInSe xS 2–x quantum dots for which the large emission bandwidth allows us to assess the impact of varied Q LSC on the concentration factor by simply varying the detection wavelength. In all cases, we find an excellent agreement between the model and the experimental observations, suggesting that the developed formalism can be utilized for express evaluation of prospective LSC performance based on the optical spectra of LSC fluorophores, which should facilitate future efforts on the development of high-performance devices based on quantum dots as well as other types of emitters.« less
The climate response to five trillion tonnes of carbon
NASA Astrophysics Data System (ADS)
Tokarska, Katarzyna B.; Gillett, Nathan P.; Weaver, Andrew J.; Arora, Vivek K.; Eby, Michael
2016-09-01
Concrete actions to curtail greenhouse gas emissions have so far been limited on a global scale, and therefore the ultimate magnitude of climate change in the absence of further mitigation is an important consideration for climate policy. Estimates of fossil fuel reserves and resources are highly uncertain, and the amount used under a business-as-usual scenario would depend on prevailing economic and technological conditions. In the absence of global mitigation actions, five trillion tonnes of carbon (5 EgC), corresponding to the lower end of the range of estimates of the total fossil fuel resource, is often cited as an estimate of total cumulative emissions. An approximately linear relationship between global warming and cumulative CO2 emissions is known to hold up to 2 EgC emissions on decadal to centennial timescales; however, in some simple climate models the predicted warming at higher cumulative emissions is less than that predicted by such a linear relationship. Here, using simulations from four comprehensive Earth system models, we demonstrate that CO2-attributable warming continues to increase approximately linearly up to 5 EgC emissions. These models simulate, in response to 5 EgC of CO2 emissions, global mean warming of 6.4-9.5 °C, mean Arctic warming of 14.7-19.5 °C, and mean regional precipitation increases by more than a factor of four. These results indicate that the unregulated exploitation of the fossil fuel resource could ultimately result in considerably more profound climate changes than previously suggested.
Developing improved silica materials and devices for integrated optics applications
NASA Astrophysics Data System (ADS)
Maker, Ashley Julia
Due to their favorable optical and material properties, silica-based materials and devices have found many important applications throughout science and engineering, especially in sensing, communications, lasers, and integrated optics. Often, silica's properties ultimately limit the performance of these applications. To address this limitation, this thesis investigates the development of improved silica materials and optical devices, including silica films, coatings, waveguides, resonators, lasers, and sensors. Using sol-gel chemistry and microfabrication procedures, custom silica materials and devices are developed to benefit many applications. In this thesis, it is first demonstrated how the low optical loss of silica enables fabrication of low loss integrated waveguides and toroidal resonators with ultra-high quality factors. Then, by adding various rare earth and metal dopants to sol-gel silica, hybrid silica materials and devices are made with custom properties such as high refractive index and lasing capabilities. Finally, several applications are demonstrated, including the use of high refractive index coatings to control the behavior of light, development of Raman and ultra-low threshold rare earth microlasers, and a heterodyned microlaser sensor with significantly improved sensing performance. Future applications and directions of this research are also discussed.
First global WCRP shortwave surface radiation budget dataset
NASA Technical Reports Server (NTRS)
Whitlock, C. H.; Charlock, T. P.; Staylor, W. F.; Pinker, R. T.; Laszlo, I.; Ohmura, A.; Gilgen, H.; Konzelman, T.; Dipasquale, R. C.; Moats, C. D.
1995-01-01
Shortwave radiative fluxes that reach the earth's surface are key factors that influence atmospheric and oceanic circulations as well as surface climate. Yet, information on these fluxes is meager. Surface site data are generally available from only a limited number of observing stations over land. Much less is known about the large-scale variability of the shortwave radiative fluxes over the oceans, which cover most of the globe. Recognizing the need to produce global-scale fields of such fluxes for use in climate research, the World Climate Research Program has initiated activities that led to the establishment of the Surface Radiation Budget Climatology Project with the ultimate goal to determine various components of the surface radiation budget from satellite data. In this paper, the first global products that resulted from this activity are described. Monthly and daily data on a 280-km grid scale are available. Samples of climate parameters obtainable from the dataset are presented. Emphasis is given to validation and limitations of the results. For most of the globe, satellite estimates have bias values between +/- 20 W/sq m and root mean square (rms) values are around 25 W/sq m. There are specific regions with much larger uncertainties however.
First global WCRP shortwave surface radiation budget dataset
NASA Technical Reports Server (NTRS)
Whitlock, C. H.; Charlock, T. P.; Staylor, W. F.; Pinker, R. T.; Laszlo, I.; Ohmura, A.; Gilgen, H.; Konzelman, T.; DiPasquale, R. C.; Moats, C. D.
1995-01-01
Shortwave radiative fluxes that reach the Earth's surface are key factors that influence atmospheric and oceanic circulations as well as surface climate. Yet, information on these fluxes is meager. Surface site data are generally available from only a limited number of observing stations over land. Much less is known about the large-scale variability of the shortwave radiative fluxes over the oceans, which cover most of the globe. Recognizing the need to produce global-scale fields of such fluxes for use in climate research, the World Climate Research Program has initiated activities that led to the establishment of the Surface Radiation Budget Climatology Project with the ultimate goal to determine various components of the surface radiation budget from satellite data. In this paper, the first global products that resulted from this activity are described. Monthly and daily data on a 280-km grid scale are available. Samples of climate parameters obtainable from the dataset are presented. Emphasis is given to validation and limitations of the results. For most of the globe, satellite estimates have bias values between +/- 20 W/sq m and rms values are around 25 W/sq m. There are specific regions with much larger uncertainties however.
CZTSSe: Materials and Physics Challenges
NASA Astrophysics Data System (ADS)
Gunawan, Oki
2011-03-01
Thin-film photovoltaic (PV) technologies led by CdTe and Cu(In,Ga) Se 2 (CIGS) are enjoying growing market share, due to their high performance and cost competitiveness, in the quest for renewable energy for the future. However the reliance on non-earth abundant elements tellurium and indium in these technologies presents a potential obstacle to ultimate terawatt deployment. We recently demonstrated kesterite Cu 2 ZnSn(Se,S)4 (CZTSSe) solar cells, comprised of the earth abundant metals copper, zinc and tin, with world record efficiency of 9.7%. In this talk we present a comprehensive device characterization study that pinpoints the key performance bottlenecks in these cells. We find strong buffer-absorber interface recombination and low minority carrier lifetimes that limit the open circuit voltage and a high and diverging device series resistance at lower temperature that suggests a blocking back contact that may limit the fill factor. These findings help to identify key areas for improvement for these CZTSSe cells in the pursuit of a high performance terawatt-scalable PV technology. In collaboration with Teodor K. Todorov, Aaron Barkhouse, Kejia Wang, David B. Mitzi, Supratik Guha, IBM T J Watson Research Center.
Fergus, Thomas A
2015-09-15
Preliminary findings suggest that anxiety sensitivity (AS) and intolerance of uncertainty (IU) may confer vulnerability for cyberchondria, defined as repeated internet searches for medical information that exacerbates health anxiety. Prior studies are limited because it remains unclear whether specific AS or IU dimensions differentially relate to certain cyberchondria dimensions. The present study examined associations among AS, IU, and cyberchondria dimensions using a sample of community adults (N = 578) located in the United States. As predicted, physical AS and inhibitory IU were the only AS or IU dimensions to share unique associations with the distress cyberchondria dimension after controlling for the overlap among the AS dimensions, IU dimensions, and health anxiety. Cognitive AS and social AS unexpectedly evidenced unique associations with cyberchondria dimensions. The results are limited by the cross-sectional study design and use of a community, rather than clinical, sample. This study provides evidence that specific AS and IU dimensions may confer vulnerability to certain cyberchondria dimensions. Further clarifying associations among AS, IU, and cyberchondria may lead to improvements in our conceptualization and, ultimately, treatment of cyberchondria. Copyright © 2015 Elsevier B.V. All rights reserved.
Neufeld, Lynnette M; Jalal, Chowdhury S B; Peña-Rosas, Juan Pablo; Tovey, David; Lutter, Chessa K; Stoltzfus, Rebecca J; Habicht, Jean-Pierre
2013-09-01
The WHO evidence-informed guidelines provide recommendations to Member States and their partners on interventions with vitamins and minerals. Evidence gathered and synthesized through systematic reviews contributes to the development of these guidelines, a process that is dependent on the availability and quality of evidence. Although the guideline development process is stringently governed and supervised to maintain clarity and transparency, the lack of adequacy and specificity of available evidence poses limitations to the formulation of recommendations that can be easily applied for policy and program decision making in diverse contexts. The symposium created a space for dialogue among scientists and public health practitioners to improve the understanding of how evidence fulfills the needs and reflect on mechanisms by which policy and program guidance and priorities for research could be better informed by policy and program needs. Ultimately, programmatic success depends not only on identifying efficacious agents but ensuring effective delivery to those with the potential to respond. To do this, we must understand the rationale for recommending interventions, the biological pathways by which interventions work, delivery systems required to make efficacious interventions work, and other contextual factors that might limit or facilitate successful implementation.
Thermal noise limit for ultra-high vacuum noncontact atomic force microscopy
Lübbe, Jannis; Temmen, Matthias; Rode, Sebastian; Rahe, Philipp; Kühnle, Angelika
2013-01-01
Summary The noise of the frequency-shift signal Δf in noncontact atomic force microscopy (NC-AFM) consists of cantilever thermal noise, tip–surface-interaction noise and instrumental noise from the detection and signal processing systems. We investigate how the displacement-noise spectral density d z at the input of the frequency demodulator propagates to the frequency-shift-noise spectral density d Δ f at the demodulator output in dependence of cantilever properties and settings of the signal processing electronics in the limit of a negligible tip–surface interaction and a measurement under ultrahigh-vacuum conditions. For a quantification of the noise figures, we calibrate the cantilever displacement signal and determine the transfer function of the signal-processing electronics. From the transfer function and the measured d z, we predict d Δ f for specific filter settings, a given level of detection-system noise spectral density d z ds and the cantilever-thermal-noise spectral density d z th. We find an excellent agreement between the calculated and measured values for d Δ f. Furthermore, we demonstrate that thermal noise in d Δ f, defining the ultimate limit in NC-AFM signal detection, can be kept low by a proper choice of the cantilever whereby its Q-factor should be given most attention. A system with a low-noise signal detection and a suitable cantilever, operated with appropriate filter and feedback-loop settings allows room temperature NC-AFM measurements at a low thermal-noise limit with a significant bandwidth. PMID:23400758
Thermal noise limit for ultra-high vacuum noncontact atomic force microscopy.
Lübbe, Jannis; Temmen, Matthias; Rode, Sebastian; Rahe, Philipp; Kühnle, Angelika; Reichling, Michael
2013-01-01
The noise of the frequency-shift signal Δf in noncontact atomic force microscopy (NC-AFM) consists of cantilever thermal noise, tip-surface-interaction noise and instrumental noise from the detection and signal processing systems. We investigate how the displacement-noise spectral density d(z) at the input of the frequency demodulator propagates to the frequency-shift-noise spectral density d(Δ) (f) at the demodulator output in dependence of cantilever properties and settings of the signal processing electronics in the limit of a negligible tip-surface interaction and a measurement under ultrahigh-vacuum conditions. For a quantification of the noise figures, we calibrate the cantilever displacement signal and determine the transfer function of the signal-processing electronics. From the transfer function and the measured d(z), we predict d(Δ) (f) for specific filter settings, a given level of detection-system noise spectral density d(z) (ds) and the cantilever-thermal-noise spectral density d(z) (th). We find an excellent agreement between the calculated and measured values for d(Δ) (f). Furthermore, we demonstrate that thermal noise in d(Δ) (f), defining the ultimate limit in NC-AFM signal detection, can be kept low by a proper choice of the cantilever whereby its Q-factor should be given most attention. A system with a low-noise signal detection and a suitable cantilever, operated with appropriate filter and feedback-loop settings allows room temperature NC-AFM measurements at a low thermal-noise limit with a significant bandwidth.
Investigating Teaching Leadership in the Capstone Marketing Course
ERIC Educational Resources Information Center
Facca-Miess, Tina M.
2015-01-01
Marketing graduates are ultimately expected to perform in managerial roles, yet limited course work is devoted to leadership training for marketing management. In the capstone marketing course, group projects with partner organizations can serve as an opportunity for student leadership development. Marketing students working in groups on…
Shear Strength of Square Graphene Nanoribbons beyond Wrinkling
NASA Astrophysics Data System (ADS)
Ragab, Tarek; Basaran, Cemal
2018-04-01
Atomistic modeling of armchair and zigzag graphene nanoribbons (GNRs) has been performed to investigate the post-wrinkling behavior under in-plane (x-y) shear deformation. Simulations were performed at 300 K for square GNRs with size ranging from 2.5 nm to 20 nm. Shear stresses led only to diagonal tension, and wrinkling was not accompanied by any diagonal compressive force. Once the diagonal tension reached its ultimate elastic level, three major stress-relaxing phenomena were observed. The type of stress-relaxing phenomenon involved greatly affected the mechanical behavior in terms of the slope of the stress-strain diagram beyond the elastic range. The results showed that the average slope of the stress-strain relation beyond the ultimate elastic stress decreased with the increase of the GNR size. Moreover, the slope of the shear stress-strain curve beyond the ultimate elastic stress was always greater for armchair than for zigzag GNRs. GNRs can sustain very high plastic shear strains beyond 100% before failure. The ultimate elastic stress can range from 20 GPa to 50 GPa, occurring at shear strain ranging from 52% to 19%. The ultimate elastic stress and strain were inversely proportional to the size of the GNR with a power factor ranging from 0.261 for armchair GNRs to 0.354 for zigzag GNRs due to the decrease in the effective width for diagonal tension.
Shear Strength of Square Graphene Nanoribbons beyond Wrinkling
NASA Astrophysics Data System (ADS)
Ragab, Tarek; Basaran, Cemal
2018-07-01
Atomistic modeling of armchair and zigzag graphene nanoribbons (GNRs) has been performed to investigate the post-wrinkling behavior under in-plane ( x- y) shear deformation. Simulations were performed at 300 K for square GNRs with size ranging from 2.5 nm to 20 nm. Shear stresses led only to diagonal tension, and wrinkling was not accompanied by any diagonal compressive force. Once the diagonal tension reached its ultimate elastic level, three major stress-relaxing phenomena were observed. The type of stress-relaxing phenomenon involved greatly affected the mechanical behavior in terms of the slope of the stress-strain diagram beyond the elastic range. The results showed that the average slope of the stress-strain relation beyond the ultimate elastic stress decreased with the increase of the GNR size. Moreover, the slope of the shear stress-strain curve beyond the ultimate elastic stress was always greater for armchair than for zigzag GNRs. GNRs can sustain very high plastic shear strains beyond 100% before failure. The ultimate elastic stress can range from 20 GPa to 50 GPa, occurring at shear strain ranging from 52% to 19%. The ultimate elastic stress and strain were inversely proportional to the size of the GNR with a power factor ranging from 0.261 for armchair GNRs to 0.354 for zigzag GNRs due to the decrease in the effective width for diagonal tension.
Joshua, Opeyemi; Olusola, Kolapo O; Oyeyemi, Kehinde D; Ogunde, Ayodeji O; Amusan, Lekan M; Nduka, David O; Abuka-Joshua, Joyce
2018-04-01
The data presented herein are compilations of the research summary of "Assessment of the Quality of Steel Reinforcement Bars Available in Nigerian Market" (Joshua et al., 2013) [1]. This data article provides information on the properties and cost of steel rebars used in reinforced concrete in Lagos, Nigeria. The data is based on the properties of 12 mm rebar brands which are the most used steel diameter in construction and they include actual diameters, yield strengths, ultimate strengths, ultimate/yield strength ratio, ductility and the cost of each brand. This data also contains the limiting standard properties of the highlighted properties in this data.
Some Physics Constraints on Ultimate Achievement in Track and Field
DOE Office of Scientific and Technical Information (OSTI.GOV)
Frohlich, Cliff
2009-02-06
World records in track and field have improved remarkably throughout the last 100 years; however, in several events physics places quite strict limitations on ultimate performance. For example, analysis suggests that records in broad jump and pole vault have approached their optimum possible values. Physical constraints are more subtle for events such as javelin, high jump, and the distance races, and thus there may be opportunities for “breakthroughs” in current records. Considering that there is enormous cultural interest and economic expenditure on sports, for most events the level of scientific analysis isn’t very high. This presents a research opportunity formore » fans who are engineers or physicists.« less
Cohen, Itay; Rapaport, Tal; Chalifa-Caspi, Vered; Rachmilevitch, Shimon
2018-05-22
Under natural conditions, plants are regularly exposed to combinations of stress factors. A common example is the conjunction between nitrogen (N) deficiency and excess light. The combined effect of stress factors is often ignored in studies using controlled conditions, possibly resulting in misleading conclusions. To address this issue, the current study examined the physiological behavior of Arabidopsis thaliana under the effect of varying nitrogen levels and light intensities. The joint influence of low N and excess light had an adverse effect on plant growth, chlorophyll and anthocyanin concentrations, photochemical capacity, and the abundance of proteins involved in carbon assimilation and anti-oxidative metabolism. In contrast, no adverse physiological responses were observed for plants under either nitrogen limitation or high light intensity conditions (i.e., single stress). The underline mechanisms for the increased growth in conditions of high light and sufficient nitrogen was due to a combination of chlorophyll accumulation and an increased number of proteins involved in C3 carbon assimilation, amino acids biosynthesis and chloroplast development. In contrast, combined stress conditions caused anthocyanin accumulation and increased number proteins involved in catabolism of lipids and amino acids as energy substrates. Ultimately switching plants from growth to survival. Our results suggest that an assessment of the physiological response to the combined effect of multiple stresses cannot be directly extrapolated from the physiological response to a single stress. Specifically, the synergistic interaction between N deficiency and saturating light in Arabidopsis plants could not have been modeled via only one of the stress factors. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
Studying Resist Stochastics with the Multivariate Poisson Propagation Model
Naulleau, Patrick; Anderson, Christopher; Chao, Weilun; ...
2014-01-01
Progress in the ultimate performance of extreme ultraviolet resist has arguably decelerated in recent years suggesting an approach to stochastic limits both in photon counts and material parameters. Here we report on the performance of a variety of leading extreme ultraviolet resist both with and without chemical amplification. The measured performance is compared to stochastic modeling results using the Multivariate Poisson Propagation Model. The results show that the best materials are indeed nearing modeled performance limits.
The levels of analysis revisited
MacDougall-Shackleton, Scott A.
2011-01-01
The term levels of analysis has been used in several ways: to distinguish between ultimate and proximate levels, to categorize different kinds of research questions and to differentiate levels of reductionism. Because questions regarding ultimate function and proximate mechanisms are logically distinct, I suggest that distinguishing between these two levels is the best use of the term. Integrating across levels in research has potential risks, but many benefits. Consideration at one level can help generate novel hypotheses at the other, define categories of behaviour and set criteria that must be addressed. Taking an adaptationist stance thus strengthens research on proximate mechanisms. Similarly, it is critical for researchers studying adaptation and function to have detailed knowledge of proximate mechanisms that may constrain or modulate evolutionary processes. Despite the benefits of integrating across ultimate and proximate levels, failure to clearly identify levels of analysis, and whether or not hypotheses are exclusive alternatives, can create false debates. Such non-alternative hypotheses may occur between or within levels, and are not limited to integrative approaches. In this review, I survey different uses of the term levels of analysis and the benefits of integration, and highlight examples of false debate within and between levels. The best integrative biology reciprocally uses ultimate and proximate hypotheses to generate a more complete understanding of behaviour. PMID:21690126
Thiel, Gerald; Rössler, Oliver G
2017-03-01
Resveratrol (trans-3,4',5-trihydroxystilbene), a polyphenolic phytoalexin of grapes and other fruits and plants, is a common constituent of our diet and of dietary supplements. Many health-promoting benefits have been connected with resveratrol in the treatment of cardiovascular diseases, cancer, diabetes, inflammation, neurodegeneration, and diseases connected with aging. To explain the pleiotropic effects of resveratrol, the molecular targets of this compound have to be identified on the cellular level. Resveratrol induces intracellular signal transduction pathways which ultimately lead to changes in the gene expression pattern of the cells. Here, we review the effect of resveratrol on the activation of the stimulus-responsive transcription factors CREB, AP-1, Egr-1, Elk-1, and Nrf2. Following activation, these transcription factors induce transcription of delayed response genes. The gene products of these delayed response genes are ultimately responsible for the changes in the biochemistry and physiology of resveratrol-treated cells. The activation of stimulus-responsive transcription factors may explain many of the intracellular activities of resveratrol. However, results obtained in vitro may not easily be transferred to in vivo systems. Copyright © 2016 Elsevier Ltd. All rights reserved.
ANALYSIS OF DISCRIMINATING FACTORS IN HUMAN ACTIVITIES THAT AFFECT EXPOSURE
Accurately modeling exposure to particulate matter (PM) and other pollutants ultimately involves the utilization of human location-activity databases to assist in understanding the potential variability of microenvironmental exposures. This paper critically considers and stati...
Chang, Margaret A; Bressler, Susan B; Munoz, Beatriz; West, Sheila K
2008-06-01
To evaluate risk factors for the incidence and progression of age-related macular degeneration (AMD) in a racially heterogeneous, geriatric population. Subjects (n = 2240) aged 65 to 84 years underwent 2 examinations separated by 2 years, of which 1937 subjects (85%) were included in this report. Fundus photographs were performed at each examination and were graded by trained readers. Multivariate logistic regression models adjusted for age, sex, race, and clustering between eyes were used to evaluate risk factors for AMD incidence and progression. Smoking was a strong, dose-dependent, risk factor for progression from medium size drusen to large drusen or pigmentary abnormalities within the central 1500-microm macular zone. Smoking was also a strong risk factor for development of incident focal pigmentation within 3000 microm of the foveal center. White participants were significantly more likely than blacks to develop large drusen and focal pigmentation and to progress from medium- to large-sized drusen or pigment abnormalities within the central 1500 microm macular zone. However, whites did not have an increased risk of progression from large drusen or pigment abnormalities within the central 1500-microm perimacular zone to foveal GA or CNV when compared with blacks. Smoking and race are important risk factors for progression from medium to large drusen or to pigment abnormalities within the central 1500-microm macular zone. Limitations in the power of this study preclude assessment of the roles of smoking and race on the ultimate progression to foveal GA or CNV once central large drusen or pigment abnormalities are present.
Institutional food as a lever for improving health in cities: the case of New York City.
Tsui, E K; Wurwarg, J; Poppendieck, J; Deutsch, J; Freudenberg, N
2015-04-01
To describe and examine the factors that most facilitate and impede the provision of healthy foods in a complex institutional food system. Comparative case study of three institutional food settings in New York City. Document review and interviews with relevant city government staff. Factors that facilitate and impede the provision of healthy food vary across institutional food settings, and particularly between centralized and decentralized settings. Generally pro-health factors include centralized purchasing and the ability to work with vendors to formulate items to improve nutritional quality, though decentralized purchasing may offer more flexibility to work with vendors offering healthier food items and to respond to consumer preferences. Factors most often working against health in more centralized systems include financing constraints that are unique to particular settings. In less centralized systems, factors working against health may include both financing constraints and factors that are site-specific, relating to preparation and equipment. Making changes to institutional food systems that will meaningfully influence public health requires a detailed understanding of the diverse systems supporting and shaping public food provision. Ultimately, the cases in this study demonstrate that agency staff typically would like to provide healthier foods, but often feel limited by the competing objectives of affordability and consumer preference. Their ability to address these competing objectives is shaped by a combination of both forces external to the institution, like nutritional regulations, and internal forces, like an agency's structure, and motivation on the part of staff. Copyright © 2014 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.
14 CFR 33.23 - Engine mounting attachments and structure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine mounting attachments and structure... mounting attachments and structure. (a) The maximum allowable limit and ultimate loads for engine mounting attachments and related engine structure must be specified. (b) The engine mounting attachments and related...
Background: Exploratory toxicology is a new emerging research area whose ultimate mission is that of protecting human health and environment from risks posed by chemicals. In this regard, the ethical and practical limitation of animal testing has encouraged the promotion of compu...
7 CFR 4280.311 - Loan provisions for Agency loans to microlenders.
Code of Federal Regulations, 2011 CFR
2011-01-01
... administer by making and servicing microloans in one or more rural areas. (b) Eligible activities... the microlender's lending policies and procedures shall limit the microlender's loan to the... will accrue interest at a rate of 1 or 2 percent based on the ultimate interest rate on the loan...
7 CFR 4280.311 - Loan provisions for Agency loans to microlenders.
Code of Federal Regulations, 2014 CFR
2014-01-01
... administer by making and servicing microloans in one or more rural areas. (b) Eligible activities... the microlender's lending policies and procedures shall limit the microlender's loan to the... will accrue interest at a rate of 1 or 2 percent based on the ultimate interest rate on the loan...
The Impact of Environmental Factors on Nursing Stress, Job Satisfaction, and Turnover Intention
Applebaum, Diane; Fowler, Susan; Fiedler, Nancy; Osinubi, Omowunmi; Robson, Mark
2014-01-01
Objective The purpose of this study was to investigate relationships between environmental factors of odor, noise, light, and color and perceived stress, job satisfaction, and turnover intention. Background The physical work environment may positively or negatively influence nurses’ stress, and stress may negatively impact their job satisfaction and intention to change jobs. Methods The research questions were answered using a descriptive, correlational design. The sample (n = 116) consisted of medical-surgical nurses working in acute-care settings. A 36-item questionnaire addressed odor, noise, light, color, perceived stress, job satisfaction, and turnover intention. Results Significant relationships were found between noise and perceived stress, perceived stress and job satisfaction, job satisfaction and turnover intention, and perceived stress and turnover intention. Conclusions Nurses tend to overlook their physical environment and “do their job.” Common environmental stressors in the work environment can be stressful to staff and influence job satisfaction and, ultimately, intention to change jobs. Mitigating or eliminating these environmental factors has the potential to improve staff satisfaction and retention. Stress influences nursing job satisfaction and, ultimately, intention to change jobs. PMID:20661062
The impact of environmental factors on nursing stress, job satisfaction, and turnover intention.
Applebaum, Diane; Fowler, Susan; Fiedler, Nancy; Osinubi, Omowunmi; Robson, Mark
2010-01-01
The purpose of this study was to investigate relationships between environmental factors of odor, noise, light, and color and perceived stress, job satisfaction, and turnover intention. The physical work environment may positively or negatively influence nurses' stress, and stress may negatively impact their job satisfaction and intention to change jobs. The research questions were answered using a descriptive, correlational design. The sample (n = 116) consisted of medical-surgical nurses working in acute-care settings. A 36-item questionnaire addressed odor, noise, light, color, perceived stress, job satisfaction, and turnover intention. Significant relationships were found between noise and perceived stress, perceived stress and job satisfaction, job satisfaction and turnover intention, and perceived stress and turnover intention. Nurses tend to overlook their physical environment and "do their job." Common environmental stressors in the work environment can be stressful to staff and influence job satisfaction and, ultimately, intention to change jobs. Mitigating or eliminating these environmental factors has the potential to improve staff satisfaction and retention. Stress influences nursing job satisfaction and, ultimately, intention to change jobs.
Yuan, Jianbo; Gao, Yi; Zhang, Xiaojun; Wei, Jiankai; Liu, Chengzhang; Li, Fuhua; Xiang, Jianhai
2017-07-05
Crustacea, particularly Decapoda, contains many economically important species, such as shrimps and crabs. Crustaceans exhibit enormous (nearly 500-fold) variability in genome size. However, limited genome resources are available for investigating these species. Exopalaemon carinicauda Holthuis, an economical caridean shrimp, is a potential ideal experimental animal for research on crustaceans. In this study, we performed low-coverage sequencing and de novo assembly of the E. carinicauda genome. The assembly covers more than 95% of coding regions. E. carinicauda possesses a large complex genome (5.73 Gb), with size twice higher than those of many decapod shrimps. As such, comparative genomic analyses were implied to investigate factors affecting genome size evolution of decapods. However, clues associated with genome duplication were not identified, and few horizontally transferred sequences were detected. Ultimately, the burst of transposable elements, especially retrotransposons, was determined as the major factor influencing genome expansion. A total of 2 Gb repeats were identified, and RTE-BovB, Jockey, Gypsy, and DIRS were the four major retrotransposons that significantly expanded. Both recent (Jockey and Gypsy) and ancestral (DIRS) originated retrotransposons responsible for the genome evolution. The E. carinicauda genome also exhibited potential for the genomic and experimental research of shrimps.
An overview of consumer attitudes and beliefs about plant food supplements.
Egan, Bernadette; Hodgkins, Charo; Shepherd, Richard; Timotijevic, Lada; Raats, Monique
2011-12-01
The use of dietary supplements is increasing globally and this includes the use of plant food supplements (PFS). A variety of factors may be influencing this increased consumption including the increasing number of older people in society, mistrust in conventional medicine and the perception that natural is healthy. Consumer studies in this area are limited, with a focus on dietary supplements in general, and complicated by the use of certain plant food supplements as herbal medicines. Research indicates that higher use of dietary supplements has been associated with being female, being more educated, having a higher income, being white and being older, however the drivers for consumption of supplements are complex, being influenced by both demographic and health-related factors. The aim of this paper is to provide an overview of current knowledge about the users and the determinants of usage of plant food supplements. With growing consumption of these products, the need for effective risk-benefit assessment becomes ever more important and an insight into who uses these types of products and why is an important starting point for any future science-based decisions made by policy makers, PFS manufacturers and ultimately by consumers themselves.
Manach, Claudine; Milenkovic, Dragan; Van de Wiele, Tom; Rodriguez-Mateos, Ana; de Roos, Baukje; Garcia-Conesa, Maria Teresa; Landberg, Rikard; Gibney, Eileen R; Heinonen, Marina; Tomás-Barberán, Francisco; Morand, Christine
2017-06-01
Bioactive compounds in plant-based foods have health properties that contribute to the prevention of age-related chronic diseases, particularly cardiometabolic disorders. Conclusive proof and understanding of these benefits in humans is essential in order to provide effective dietary recommendations but, so far, the evidence obtained from human intervention trials is limited and contradictory. This is partly due to differences between individuals in the absorption, distribution, metabolism and excretion of bioactive compounds, as well as to heterogeneity in their biological response regarding cardiometabolic health outcomes. Identifying the main factors underlying inter-individual differences, as well as developing new and innovative methodologies to account for such variability constitute an overarching goal to ultimately optimize the beneficial health effects of plant food bioactives for each and every one of us. In this respect, this position paper from the COST Action FA1403-POSITIVe examines the main factors likely to affect the individual responses to consumption of plant food bioactives and presents perspectives for assessment and consideration of inter-individual variability. © 2016 The Authors. Molecular Nutrition & Food Research published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Parasitism and the evolutionary ecology of animal personality
Barber, Iain; Dingemanse, Niels J.
2010-01-01
The ecological factors responsible for the evolution of individual differences in animal personality (consistent individual differences in the same behaviour across time and contexts) are currently the subject of intense debate. A limited number of ecological factors have been investigated to date, with most attention focusing on the roles of resource competition and predation. We suggest here that parasitism may play a potentially important, but largely overlooked, role in the evolution of animal personalities. We identify two major routes by which parasites might influence the evolution of animal personality. First, because the risk of acquiring parasites can be influenced by an individual's behavioural type, local parasite regimes may impose selection on personality traits and behavioural syndromes (correlations between personality traits). Second, because parasite infections have consequences for aspects of host ‘state’, parasites might induce the evolution of individual differences in certain types of host behaviour in populations with endemic infections. Also, because infection often leads to specific changes in axes of personality, parasite infections have the potential to decouple behavioural syndromes. Host–parasite systems therefore provide researchers with valuable tools to study personality variation and behavioural syndromes from a proximate and ultimate perspective. PMID:21078659
Organizational determinants of evaluation practice in Australian prevention agencies.
Schwarzman, J; Bauman, A; Gabbe, B; Rissel, C; Shilton, T; Smith, B J
2018-06-01
Program evaluation is essential to inform decision making, contribute to the evidence base for strategies, and facilitate learning in health promotion and disease prevention organizations. Theoretical frameworks of organizational learning, and studies of evaluation capacity building describe the organization as central to evaluation capacity. Australian prevention organizations recognize limitations to current evaluation effectiveness and are seeking guidance to build evaluation capacity. This qualitative study identifies organizational facilitators and barriers to evaluation practice, and explores their interactions in Australian prevention organizations. We conducted semi-structured interviews with 40 experienced practitioners from government and non-government organizations. Using thematic analysis, we identified seven key themes that influence evaluation practice: leadership, organizational culture, organizational systems and structures, partnerships, resources, workforce development and training and recruitment and skills mix. We found organizational determinants of evaluation to have multi-level interactions. Leadership and organizational culture influenced organizational systems, resource allocation and support of staff. Partnerships were important to overcome resource deficits, and systems were critical to embed evaluation within the organization. Organizational factors also influenced the opportunities for staff to develop skills and confidence. We argue that investment to improve these factors would allow organizations to address evaluation capacity at multiple levels, and ultimately facilitate effective evaluation practice.
The Genetics of Pulmonary Arterial Hypertension
Austin, Eric D.; Loyd, James E.
2014-01-01
Pulmonary arterial hypertension (PAH) is a progressive and fatal disease for which there is an ever-expanding body of genetic and related pathophysiological information on disease pathogenesis. A number of germline gene mutations have now been described, including mutations in the gene coding bone morphogenic protein receptor type 2 (BMPR2) and related genes. Recent advanced gene sequencing methods have facilitated the discovery of additional genes with mutations among those with and without familial forms of PAH (CAV1, KCNK3, EIF2AK4). The reduced penetrance, variable expressivity, and female predominance of PAH suggest that genetic, genomic and other factors modify disease expression. These multi-faceted variations are an active area of investigation in the field, including but not limited to common genetic variants and epigenetic processes, and may provide novel opportunities for pharmacologic intervention in the near future. They also highlight the need for a systems-oriented multi-level approach to incorporate the multitude of biologic variations now associated with PAH. Ultimately, improved understanding provides the opportunity for improved patient and family counseling about this devastating disease, but do require in depth understanding of the genetic factors relevant to PAH. PMID:24951767
Characterization of a Ultra-high Temperature Ceramic Composite
NASA Technical Reports Server (NTRS)
Levine, Stanley R.; Opila, Elizabeth J.; Robinson, Raymond C.; Lorincz, Jonathan A.
2003-01-01
Ultra-high temperature ceramics (UHTC) are of interest for hypersonic vehicle leading edge applications. Monolithic UHTCs are of concern because of their low fracture toughness and brittle behavior. UHTC composites (UHTCC) are being investigated as a possible approach to overcome these deficiencies. In this study a small sample of a UHTCC was evaluated by limited mechanical property tests, furnace oxidation exposures, and oxidation exposures in a flowing environment. The composite was prepared from a carbon fiber perform using ceramic particulates and a preceramic polymer. The as-received composite plate was non-uniform from front to back surface. Plate dimensions were 150 x 150 x 6 mm. The back surface had a fibrous, uniform appearance; XRD analysis revealed the presence of Sic and C. The front surface was smooth and non-uniform in appearance with evidence of a coarse grain structure produced by a liquid phase; XRD analysis revealed the presence of HfB2. Microcracks were present throughout the thickness as one might expect from a carbon fiber reinforced composite with attendant large thermal expansion mismatch between the matrix phases and the fibers. The HfB2 phase on the front surface was comparable in thickness to a fiber ply or about 0.6 mm, and surface microcracks were evident. Limited four point flexural tests were carried out at span to depth ratios of approximately 14 and 16 with markedly different results. Tests were run with the front or the back surface in tension. At the shorter span to depth failures occurred under a loading pin for both orientations. At a span to depth of 16 failures occurred in the center of the span with fracture clearly initiating from a tensile failure. Ultimate flexural strength, strain at ultimate stress, stress and strain at deviation from linear elastic behavior are reported. Strains at ultimate stress ranged from about 0.6 to 0.7 % for the back surface in tension, and 0.4 to 0.6 for the front surface in tension. At constant span to depth the strain at ultimate stress was about 0.2% greater for the back surface in tension and the ultimate strength was also higher. Strengths were in line with predictions from theory. Furnace oxidation studies were carried out at 1627 and 1927OC in a static furnace environment using ten minute cycles and one, five, and ten cycles. Limited oxidation studies were also carried out in a flowing oxyacetylene torch environment. Specimens were photographed, and weight and dimensional changes were determined. XRD and SEM characterizations were performed. Weight losses were attributed primarily to carbon fiber oxidation. The composite survived the torch test with little visible distress. Further details will be determined once metallographic studies are completed.
Special Purpose Crew Restraints for Teleoperation
NASA Technical Reports Server (NTRS)
Whitmore, Mihriban; Holden, Kritina; Norris, Lena
2004-01-01
With permanent human presence onboard the International Space Station (ISS), and long duration space missions being planned for the moon and Mars, humans will be living and working in microgravity over increasingly long periods of time. In addition to weightlessness, the confined nature of a spacecraft environment results in ergonomic challenges such as limited visibility, and access to the activity area. These challenges can result in prolonged periods of unnatural postures for the crew, ultimately causing pain, injury, and loss of productivity. Determining the right set of human factors requirements and providing an ergonomically designed environment is crucial to mission success. While a number of general purpose restraints have been used on ISS (handrails, foot loops), experience has shown that these general purpose restraints may not be optimal, or even acceptable for some tasks that have unique requirements. For example, some onboard activities require extreme stability (e.g., glovebox microsurgery), and others involve the use of arm, torso and foot movements in order to perform the task (e-g. robotic teleoperation); standard restraint systems will not work in these situations. The Usability Testing and Analysis Facility (WAF) at the NASA Johnson Space Center began evaluations of crew restraints for these special situations by looking at NASAs Robonaut. Developed by the Robot Systems Technology Branch, Robonaut is a humanoid robot that can be remotely operated through a tetepresence control system by an operator. It was designed to perform work in hazardous environments (e.g., Extra Vehicular Activities). A Robonaut restraint was designed, modeled for the population, and ultimately tested onboard the KC-135 microgravity aircraft. While in microgravity, participants were asked to get in and out of the restraint from different locations, perform maximum reach exercises, and finally to teleoperate Robonaut while in the restraint. The sessions were videotaped, and participants completed a questionnaire at the end of each flight day. Results from this evaluation are being used to develop the human factors design requirements for teleoperation tasks in microgravity.
NASA Astrophysics Data System (ADS)
Sarich, Steven J.
Advances in portable X-ray fluorescence (pXRF) technology have made it a viable option for the non-destructive exploration of the underlying chemical composition of ceramic artifacts for the purposes of classification. However, because the literature regarding the use of this instrument on historic artifacts is limited, it is necessary to begin with a broad scale exploratory assessment that might act as a jumping off point for future studies on this topic. Toward that end, this research uses a collection of British and Continental European ceramics ranging from 1650-1920, owned and curated by the Chipstone Foundation in Fox Point, WI, to explore the efficacy of using pXRF to sort and source those materials. The chemical patterns in the data are tested against the known provenance of these artifacts which has been pre-determined by ceramic experts and material culture analysts. Of the 102 samples that have been tested, primary focus is given to items crafted in London and Staffordshire which account for the largest portion of artifacts in the dataset. Principle component analysis is used to better understand the underlying structure of the entire dataset to ultimately reduce the number of chemical variables to those that best distinguish each group. Using those particular chemical variables, a separate dataset of London and Staffordshire mean intensity readings is subjected to factor analysis which resulted in two components being identified. The calculated factor scores are incorporated into a binary logistic regression model to determine if the samples can be correctly sorted into their pre-established provenance categories. A second model that incorporates the year of production is also presented which shows an improved ability to classify those samples. These results are ultimately situated within the historic context of the pottery making industry in England which was highly influenced by the Industrial Revolution and developments in ceramic technology.
Puddey, Ian B; Mercer, Annette; Playford, Denese E; Riley, Geoffrey J
2015-04-14
We have previously demonstrated that both coming from a rural background and spending a year-long clinical rotation in our Rural Clinical School (RCS) have independent and additive effects to increase the likelihood of medical students practicing rurally following graduation. The current study assesses the extent to which medical school selection criteria and/or the socio-demographic profile of medical students may further facilitate or hamper the selection of students ultimately destined for the rural medical workforce. The study comprised 729 students, admitted from secondary school since 1999 and having graduated by 2011, whose actual workplace location in 2014 was classified as either urban or rural using the Australian Health Practitioner Regulation Agency database. Selection factors on entry (score from a standardised interview, percentile scores for the 3 components of the Undergraduate Medicine and Health Sciences Admission Test (UMAT) and prior academic performance as assessed by the Australian Tertiary Admissions Rank) together with socio-demographic factors (age, gender, decile for the Index of Relative Socioeconomic Advantage and Disadvantage (IRSAD)), were examined in relation to ultimate rural destination of practice. In logistic regression, those practicing in a rural location in 2014 were more likely to have come from the lower 6 IRSAD deciles (OR 2.75, 95% CI 1.44, 5.23, P = 0.002), to be older (OR 1.86, 95% CI 1.09, 3.18, p = 0.023) and to have a lower UMAT-3 (Non-verbal communication) score (OR 0.98, 95% CI 0.97, 0.99, P = 0.005). After further controlling for either rural background or RCS participation, only age and UMAT-3 remained as independent predictors of current rural practice. In terms of the socio-demographic profiles of those selected for medical school entry from secondary school, only older age weakly augmented the selection of graduates likely to ultimately work in a rural destination. Among the selection factors, having achieved higher scores in UMAT-3 tended to mitigate this outcome. The major focus in attempts to grow the rural medical workforce should therefore remain on recruiting medical students from a rural background together with providing maximal opportunity for prolonged immersion in rural clinical environments during their training.
Experimental Estimation of Entanglement at the Quantum Limit
NASA Astrophysics Data System (ADS)
Brida, Giorgio; Degiovanni, Ivo Pietro; Florio, Angela; Genovese, Marco; Giorda, Paolo; Meda, Alice; Paris, Matteo G. A.; Shurupov, Alexander
2010-03-01
Entanglement is the central resource of quantum information processing and the precise characterization of entangled states is a crucial issue for the development of quantum technologies. This leads to the necessity of a precise, experimental feasible measure of entanglement. Nevertheless, such measurements are limited both from experimental uncertainties and intrinsic quantum bounds. Here we present an experiment where the amount of entanglement of a family of two-qubit mixed photon states is estimated with the ultimate precision allowed by quantum mechanics.
McWilliams, Scott R.; Karasov, William H.
2014-01-01
Flexible phenotypes enable animals to live in environments that change over space and time, and knowing the limits to and the required time scale for this flexibility provides insights into constraints on energy and nutrient intake, diet diversity and niche width. We quantified the level of immediate and ultimate spare capacity, and thus the extent of phenotypic flexibility, in the digestive system of a migratory bird in response to increased energy demand, and identified the digestive constraints responsible for the limits on sustained energy intake. Immediate spare capacity decreased from approximately 50% for birds acclimated to relatively benign temperatures to less than 20% as birds approached their maximum sustainable energy intake. Ultimate spare capacity enabled an increase in feeding rate of approximately 126% as measured in birds acclimated for weeks at −29°C compared with +21°C. Increased gut size and not tissue-specific differences in nutrient uptake or changes in digestive efficiency or retention time were primarily responsible for this increase in capacity with energy demand, and this change required more than 1–2 days. Thus, the pace of change in digestive organ size may often constrain energy intake and, for birds, retard the pace of their migration. PMID:24718764
McWilliams, Scott R; Karasov, William H
2014-05-22
Flexible phenotypes enable animals to live in environments that change over space and time, and knowing the limits to and the required time scale for this flexibility provides insights into constraints on energy and nutrient intake, diet diversity and niche width. We quantified the level of immediate and ultimate spare capacity, and thus the extent of phenotypic flexibility, in the digestive system of a migratory bird in response to increased energy demand, and identified the digestive constraints responsible for the limits on sustained energy intake. Immediate spare capacity decreased from approximately 50% for birds acclimated to relatively benign temperatures to less than 20% as birds approached their maximum sustainable energy intake. Ultimate spare capacity enabled an increase in feeding rate of approximately 126% as measured in birds acclimated for weeks at -29°C compared with +21°C. Increased gut size and not tissue-specific differences in nutrient uptake or changes in digestive efficiency or retention time were primarily responsible for this increase in capacity with energy demand, and this change required more than 1-2 days. Thus, the pace of change in digestive organ size may often constrain energy intake and, for birds, retard the pace of their migration.
Ecology of conflict: marine food supply affects human-wildlife interactions on land.
Artelle, Kyle A; Anderson, Sean C; Reynolds, John D; Cooper, Andrew B; Paquet, Paul C; Darimont, Chris T
2016-05-17
Human-wildlife conflicts impose considerable costs to people and wildlife worldwide. Most research focuses on proximate causes, offering limited generalizable understanding of ultimate drivers. We tested three competing hypotheses (problem individuals, regional population saturation, limited food supply) that relate to underlying processes of human-grizzly bear (Ursus arctos horribilis) conflict, using data from British Columbia, Canada, between 1960-2014. We found most support for the limited food supply hypothesis: in bear populations that feed on spawning salmon (Oncorhynchus spp.), the annual number of bears/km(2) killed due to conflicts with humans increased by an average of 20% (6-32% [95% CI]) for each 50% decrease in annual salmon biomass. Furthermore, we found that across all bear populations (with or without access to salmon), 81% of attacks on humans and 82% of conflict kills occurred after the approximate onset of hyperphagia (July 1(st)), a period of intense caloric demand. Contrary to practices by many management agencies, conflict frequency was not reduced by hunting or removal of problem individuals. Our finding that a marine resource affects terrestrial conflict suggests that evidence-based policy for reducing harm to wildlife and humans requires not only insight into ultimate drivers of conflict, but also management that spans ecosystem and jurisdictional boundaries.
Evacuation pattern analysis of a survivable commercial aircraft crash.
DOT National Transportation Integrated Search
1962-05-01
The evacuation pattern of 99 of 106 survivors of a jet transport crash involving a post crash fire is described, factors possibly effecting the suffocation and ultimate death of 16 passengers are listed and photographs and diagrams are presented.
Kim, Yong-Hyun; Kim, Ki-Hyun
2012-10-02
To understand the ultimately lowest detection range of volatile organic compounds (VOCs) in air, application of a high sensitivity analytical system was investigated by coupling thermal desorption (TD) technique with gas chromatography (GC) and time-of-flight (TOF) mass spectrometry (MS). The performance of the TD-GC/TOF MS system was evaluated using liquid standards of 19 target VOCs prepared in the range of 35 pg to 2.79 ng per μL. Studies were carried out using both total ion chromatogram (TIC) and extracted ion chromatogram (EIC) mode. EIC mode was used for calibration to reduce background and to improve signal-to-noise. The detectability of 19 target VOCs, if assessed in terms of method detection limit (MDL, per US EPA definition) and limit of detection (LOD), averaged 5.90 pg and 0.122 pg, respectively, with the mean coefficient of correlation (R(2)) of 0.9975. The minimum quantifiable mass of target analytes, when determined using real air samples by the TD-GC/TOF MS, is highly comparable to the detection limits determined experimentally by standard. In fact, volumes for the actual detection of the major aromatic VOCs like benzene, toluene, and xylene (BTX) in ambient air samples were as low as 1.0 mL in the 0.11-2.25 ppb range. It was thus possible to demonstrate that most target compounds including those in low abundance could be reliably quantified at concentrations down to 0.1 ppb at sample volumes of less than 10 mL. The unique sensitivity of this advanced analytical system can ultimately lead to a shift in field sampling strategy with smaller air sample volumes facilitating faster, simpler air sampling (e.g., use of gas syringes rather than the relative complexity of pumps or bags/canisters), with greatly reduced risk of analyte breakthrough and minimal interference, e.g., from atmospheric humidity. The improved detection limits offered by this system can also enhance accuracy and measurement precision.
Ager, Brittany; Butow, Phyllis; Jansen, Jesse; Phillips, Kelly-Anne; Porter, David
2016-08-01
Conduct a systematic review of quantitative and qualitative studies exploring patient reported factors and psychological variables influencing the decision to have contralateral prophylactic mastectomy (CPM), and satisfaction with CPM, in women with early stage breast cancer. Studies were identified via databases: Medline, CINAHL, Embase and PsycINFO. Data were extracted by one author and crosschecked by two additional authors for accuracy. The quality of included articles was assessed using standardised criteria by three authors. Of the 1346 unique citations identified, 17 were studies that met the inclusion criteria. Studies included were primarily cross-sectional and retrospective. No study utilised a theoretical framework to guide research and few studies considered psychological predictors of CPM. Fear of breast cancer was the most commonly cited reason for CPM, followed by cosmetic reasons such as desire for symmetry. Overall, women appeared satisfied with CPM, however, adverse/diminished body image, poor cosmetic result, complications, diminished sense of sexuality, emotional issues and perceived lack of education regarding alternative surveillance/CPM efficacy were cited as reasons for dissatisfaction. Current literature has begun to identify patient-reported reasons for CPM; however, the relative importance of different factors and how these factors relate to the process underlying the decision to have CPM are unknown. Of women who considered CPM, limited information is available regarding differences between those who proceed with or ultimately decline CPM. Copyright © 2016 Elsevier Ltd. All rights reserved.
Limited native plant regeneration in novel, exotic-dominated forests on Hawaii
Joseph Mascaro; Kristen K. Becklund; R. Flint Hughes; Stefan A. Schnitzer
2008-01-01
Ecological invasions are amajor driver of global environmental change. When invasions are frequent and prolonged, exotic species can become dominant and ultimately create novel ecosystem types. These ecosystems are now widespread globally. Recent evidence from Puerto Rico suggests that exoticdominated forests can provide suitable regeneration sites for native species...
78 FR 26812 - Request To Amend a License To Export Radioactive Waste
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-08
... NUCLEAR REGULATORY COMMISSION Request To Amend a License To Export Radioactive Waste Pursuant to...; XW012/03; 11005699. A radioactive total of 5,500 Energy of Canada waste). tons of low- Limited facilities as level waste). ``Ultimate Foreign Consignee(s).'' No other changes to the existing license which...
46 CFR 32.63-20 - Hull structure-B/ALL.
Code of Federal Regulations, 2011 CFR
2011-10-01
... condition such that the forward rake bulkhead rests upon a pinnacle at the water surface, the maximum hull bending stress shall not exceed the following limits: (1) Independent tanks may be installed in such a... stress shall not exceed either 50 percent of the minimum ultimate tensile strength of the material or 70...
46 CFR 32.63-20 - Hull structure-B/ALL.
Code of Federal Regulations, 2010 CFR
2010-10-01
... bending stress shall not exceed the following limits: (1) Independent tanks may be installed in such a... stress shall not exceed either 50 percent of the minimum ultimate tensile strength of the material or 70... reduction in hull stress when independent tanks are installed in such a manner as to contribute to the...
Limits on Interconnection Bandwidth for On-Board Processing
NASA Technical Reports Server (NTRS)
Lux, James P.
2006-01-01
This viewgraph presentation reviews the constraints, and concerns of spacecraft design, in particular spacecraft instrumentation design and the issues concerning space communication. The advantages and disadvantages of several communication options are reviewed. Ultimately there will be spacecraft communication not between boxes on spacecraft, but between spacecraft. The future of spacecraft communication is interplanetary networks.
On Explaining Language Shift: Sociology or Social Psychology of Language?
ERIC Educational Resources Information Center
Maitz, Peter
2011-01-01
This study investigates the potentials and limits of sociolinguistic research on language shift. Starting from a position that the ultimate goal of the research must be to create a general theory of language shift of predictive power, the author examines the explanatory potential of current mainstream research methodology now regarded as canonical…
A Comparison of Evaluation Practices Based on E-Learning and Mobile Learning Delivery Rates
ERIC Educational Resources Information Center
Marshall, James
2018-01-01
Learning and performance professionals are increasingly pressed to measure the results of their learning program design efforts, and ultimately prove their worth. However, evaluation efforts are often limited to measuring participant reaction. This study sought to quantify evaluation practices in organizations and investigate how the use of…
ERIC Educational Resources Information Center
Pilcher, Nick; Forster, Alan; Tennant, Stuart; Murray, Mike; Craig, Nigel
2017-01-01
"Career Academics" are principally research-led, entering academia with limited or no industrial or practical experience. UK Higher Education Institutions welcome them for their potential to attain research grant funding and publish world-leading journal papers, ultimately enhancing institutional reputation. This polemical paper…
14 CFR 91.313 - Restricted category civil aircraft: Operating limitations.
Code of Federal Regulations, 2014 CFR
2014-01-01
...-category civil airplane manufactured after July 18, 1978, unless an approved shoulder harness is installed for each front seat. The shoulder harness must be designed to protect each occupant from serious head injury when the occupant experiences the ultimate inertia forces specified in § 23.561(b)(2) of this...
14 CFR 91.313 - Restricted category civil aircraft: Operating limitations.
Code of Federal Regulations, 2012 CFR
2012-01-01
...-category civil airplane manufactured after July 18, 1978, unless an approved shoulder harness is installed for each front seat. The shoulder harness must be designed to protect each occupant from serious head injury when the occupant experiences the ultimate inertia forces specified in § 23.561(b)(2) of this...
14 CFR 91.313 - Restricted category civil aircraft: Operating limitations.
Code of Federal Regulations, 2010 CFR
2010-01-01
...-category civil airplane manufactured after July 18, 1978, unless an approved shoulder harness is installed for each front seat. The shoulder harness must be designed to protect each occupant from serious head injury when the occupant experiences the ultimate inertia forces specified in § 23.561(b)(2) of this...
14 CFR 91.313 - Restricted category civil aircraft: Operating limitations.
Code of Federal Regulations, 2011 CFR
2011-01-01
...-category civil airplane manufactured after July 18, 1978, unless an approved shoulder harness is installed for each front seat. The shoulder harness must be designed to protect each occupant from serious head injury when the occupant experiences the ultimate inertia forces specified in § 23.561(b)(2) of this...
14 CFR 91.313 - Restricted category civil aircraft: Operating limitations.
Code of Federal Regulations, 2013 CFR
2013-01-01
...-category civil airplane manufactured after July 18, 1978, unless an approved shoulder harness is installed for each front seat. The shoulder harness must be designed to protect each occupant from serious head injury when the occupant experiences the ultimate inertia forces specified in § 23.561(b)(2) of this...
46 CFR 32.63-20 - Hull structure-B/ALL.
Code of Federal Regulations, 2012 CFR
2012-10-01
... bending stress shall not exceed the following limits: (1) Independent tanks may be installed in such a... stress shall not exceed either 50 percent of the minimum ultimate tensile strength of the material or 70... reduction in hull stress when independent tanks are installed in such a manner as to contribute to the...
46 CFR 32.63-20 - Hull structure-B/ALL.
Code of Federal Regulations, 2014 CFR
2014-10-01
... bending stress shall not exceed the following limits: (1) Independent tanks may be installed in such a... stress shall not exceed either 50 percent of the minimum ultimate tensile strength of the material or 70... reduction in hull stress when independent tanks are installed in such a manner as to contribute to the...
46 CFR 32.63-20 - Hull structure-B/ALL.
Code of Federal Regulations, 2013 CFR
2013-10-01
... bending stress shall not exceed the following limits: (1) Independent tanks may be installed in such a... stress shall not exceed either 50 percent of the minimum ultimate tensile strength of the material or 70... reduction in hull stress when independent tanks are installed in such a manner as to contribute to the...
DOES FOLIAGE ON THE SAME BRANCH COMPETE FOR THE SAME WATER? EXPERIMENTS ON DOUGLAS-FIR TREES
It has been hypothesized that as trees age and increase in size, the resistance along the water transport path increases and potentially limits the ultimate size a tree can reach. Architecturally, branches on young and old trees differ in their conductivity properties and could ...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-13
... Operations, Inc. (EOI), requested on behalf of itself, SERI, and their parent companies (together, the...) will remain as the ultimate parent company, but a new intermediate company, Entergy Utilities Holdings, LLC, a Delaware limited liability company, will be created, which will be the direct parent company of...
ERIC Educational Resources Information Center
Grapin, Sally L.; Bocanegra, Joel O.; Green, Tonika Duren; Lee, Erica T.; Jaafar, Dounia
2016-01-01
Historically, practitioners from culturally diverse backgrounds, especially racial, ethnic, and linguistic (REL) minority backgrounds, have been significantly underrepresented in the field of school psychology. A lack of diversity in the workforce is problematic for a number of reasons and ultimately limits the range of talents, ideas, and…
Evolutionary speed limited by water in arid Australia
Goldie, Xavier; Gillman, Len; Crisp, Mike; Wright, Shane
2010-01-01
The covariation of biodiversity with climate is a fundamental pattern in nature. However, despite the ubiquity of this relationship, a consensus on the ultimate cause remains elusive. The evolutionary speed hypothesis posits direct mechanistic links between ambient temperature, the tempo of micro-evolution and, ultimately, species richness. Previous research has demonstrated faster rates of molecular evolution in warmer climates for a broad range of poikilothermic and homeothermic organisms, in both terrestrial and aquatic environments. In terrestrial systems, species richness increases with both temperature and water availability and the interaction of those terms: productivity. However, the influence of water availability as an independent variable on micro-evolutionary processes has not been examined previously. Here, using methodology that limits the potentially confounding role of cladogenetic and demographic processes, we report, to our knowledge, the first evidence that woody plants living in the arid Australian Outback are evolving more slowly than related species growing at similar latitudes in moist habitats on the mesic continental margins. These results support a modified evolutionary speed explanation for the relationship between the water-energy balance and plant diversity patterns. PMID:20410038
Evolutionary speed limited by water in arid Australia.
Goldie, Xavier; Gillman, Len; Crisp, Mike; Wright, Shane
2010-09-07
The covariation of biodiversity with climate is a fundamental pattern in nature. However, despite the ubiquity of this relationship, a consensus on the ultimate cause remains elusive. The evolutionary speed hypothesis posits direct mechanistic links between ambient temperature, the tempo of micro-evolution and, ultimately, species richness. Previous research has demonstrated faster rates of molecular evolution in warmer climates for a broad range of poikilothermic and homeothermic organisms, in both terrestrial and aquatic environments. In terrestrial systems, species richness increases with both temperature and water availability and the interaction of those terms: productivity. However, the influence of water availability as an independent variable on micro-evolutionary processes has not been examined previously. Here, using methodology that limits the potentially confounding role of cladogenetic and demographic processes, we report, to our knowledge, the first evidence that woody plants living in the arid Australian Outback are evolving more slowly than related species growing at similar latitudes in moist habitats on the mesic continental margins. These results support a modified evolutionary speed explanation for the relationship between the water-energy balance and plant diversity patterns.
Catheter associated urinary tract infections
2014-01-01
Urinary tract infection attributed to the use of an indwelling urinary catheter is one of the most common infections acquired by patients in health care facilities. As biofilm ultimately develops on all of these devices, the major determinant for development of bacteriuria is duration of catheterization. While the proportion of bacteriuric subjects who develop symptomatic infection is low, the high frequency of use of indwelling urinary catheters means there is a substantial burden attributable to these infections. Catheter-acquired urinary infection is the source for about 20% of episodes of health-care acquired bacteremia in acute care facilities, and over 50% in long term care facilities. The most important interventions to prevent bacteriuria and infection are to limit indwelling catheter use and, when catheter use is necessary, to discontinue the catheter as soon as clinically feasible. Infection control programs in health care facilities must implement and monitor strategies to limit catheter-acquired urinary infection, including surveillance of catheter use, appropriateness of catheter indications, and complications. Ultimately, prevention of these infections will require technical advances in catheter materials which prevent biofilm formation. PMID:25075308
NASA Astrophysics Data System (ADS)
Obraztsov, S. M.; Konobeev, Yu. V.; Birzhevoy, G. A.; Rachkov, V. I.
2006-12-01
The dependence of mechanical properties of ferritic/martensitic (F/M) steels on irradiation temperature is of interest because these steels are used as structural materials for fast, fusion reactors and accelerator driven systems. Experimental data demonstrating temperature peaks in physical and mechanical properties of neutron irradiated pure iron, nickel, vanadium, and austenitic stainless steels are available in the literature. A lack of such an information for F/M steels forces one to apply a computational mathematical-statistical modeling methods. The bootstrap procedure is one of such methods that allows us to obtain the necessary statistical characteristics using only a sample of limited size. In the present work this procedure is used for modeling the frequency distribution histograms of ultimate strength temperature peaks in pure iron and Russian F/M steels EP-450 and EP-823. Results of fitting the sums of Lorentz or Gauss functions to the calculated distributions are presented. It is concluded that there are two temperature (at 360 and 390 °C) peaks of the ultimate strength in EP-450 steel and single peak at 390 °C in EP-823.
Recruitment of participants to a multiple sclerosis trial: The CombiRx experience
Bhanushali, Minal J; Gustafson, Tarah; Powell, Steve; Conwit, Robin A; Wolinsky, Jerry S; Cutter, Gary R; Lublin, Fred; Cofield, Stacey S
2014-01-01
Background and Purpose: Participant recruitment is central to all clinical trials. Any delay in recruitment affects the completion and ultimate success of the trial. We report our experience with patient screening and randomization in CombiRx, which may inform the design of other trials. CombiRx was a multi-center, phase III, double-blind, randomized clinical trial comparing the combined use of interferon beta-1a and glatiramer acetate to either agent alone in patients with relapsing-remitting multiple sclerosis (RRMS). This trial was launched in January 2005 in 69 centers in the U.S. and Canada under a co-operative agreement with the National Institute of Neurological Disorders and Stroke (NINDS). The goal was to recruit 1000 patients over 1.5 years after a 6 month startup period. Instead, the investigators required 4.25 years to enroll 1008 patients. Methods: During this trial, we assessed the effectiveness of various recruitment strategies, utility of rescreening prior screen failures, and potential factors and strategies used in study conduct, research and infrastructure, all of which affected recruitment of participants and ultimately time to completion of CombiRx. We particularly were interested in the variability in time to site initiation between academic centers and private practice sites. Results: Physicians who were directly involved in the medical care of patients with RRMS were the primary source of patients recruited to CombiRx. A flexible study design that allowed for re-screening of the initial screen failures after a period of time was useful due to the relapsing/remitting course of the disease. Academic centers took longer to implement the trial than the private practice centers, but once sites were approved for enrollment, there was no important difference in the number of participants enrolled. Limitations: The CombiRx trial was conducted during a period when multiple new medications were being tested, thus affecting the pace of recruitment and limiting ability to generalize our experiences. However, the lessons we learned about process are relevant. Conclusion: Participants can be enrolled successfully in a clinical trial for RRMS, but factors affecting the time to achieve the requirements needed to start screening can be unpredictable and problematic. Prospective planning by the sponsors and investigators, use of central IRBs, master trial agreements and secure remote desktop access to the trial database may expedite trial implementation and participant recruitment. A good scientific research question with flexible study design and active involvement of the clinicians are important factors driving recruitment. Clinical trials can be implemented successfully both in private practices and at academic centers, a consideration when selecting sites. PMID:24686106
Factors determining the viability of radiation processing in developing countries
NASA Astrophysics Data System (ADS)
van der Linde, HJ; Basson, RA
In the fifteen years since the introduction of radiation processing to South Africa, four commercial irradiation facilities have been established. These are involved in the processing of a large variety of products, from syringes and prostheses to strawberries and sugar yeast. Three of the facilities are devoted mainly to food irradiation and several thousand tonnes are now processed annually. During this period it was repeatedly experienced that the successful introduction of radiation processing in general, and food radurization in particular, on a commercial scale was critically dependent on the following factors: acceptance by the producer, industry and consumer; initial capital expenditure; running costs and overheads in general; and continous throughput. All of these factors contribute to the processing cost which is the ultimate factor in determing the value/price ratio for the potential entrepreneur and customer of this new technology. After a market survey had identified the need for a new food irradiation facility to cope with the growing interest in commercial food radurization in the Western Cape, the above-mentioned factors were of cardinal importance in the design and manufacture of a new irradiator. The resulting batch-pallet facility which was commisioned in August 1986, is rather inefficient as far as energy utilization is concerned but this shortcoming is compensated for by its low cost, versatility and low hold-up. Although the facility has limitations as far as the processing of really large volumes of produce is concerned, it is particularly suitable not only for developing countries, but for developed countries in the introductory phase of commercial food radurization.
Newson, Robyn; King, Lesley; Rychetnik, Lucie; Bauman, Adrian E; Redman, Sally; Milat, Andrew J; Schroeder, Jacqueline; Cohen, Gillian; Chapman, Simon
2015-07-21
To investigate researchers' perceptions about the factors that influenced the policy and practice impacts (or lack of impact) of one of their own funded intervention research studies. Mixed method, cross-sectional study. Intervention research conducted in Australia and funded by Australia's National Health and Medical Research Council between 2003 and 2007. The chief investigators from 50 funded intervention research studies were interviewed to determine if their study had achieved policy and practice impacts, how and why these impacts had (or had not) occurred and the approach to dissemination they had employed. We found that statistically significant intervention effects and publication of results influenced whether there were policy and practice impacts, along with factors related to the nature of the intervention itself, the researchers' experience and connections, their dissemination and translation efforts, and the postresearch context. This study indicates that sophisticated approaches to intervention development, dissemination actions and translational efforts are actually widespread among experienced researches, and can achieve policy and practice impacts. However, it was the links between the intervention results, further dissemination actions by researchers and a variety of postresearch contextual factors that ultimately determined whether a study had policy and practice impacts. Given the complicated interplay between the various factors, there appears to be no simple formula for determining which intervention studies should be funded in order to achieve optimal policy and practice impacts. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Phylogenetic and ecological factors impact the gut microbiota of two Neotropical primate species.
Amato, Katherine R; Martinez-Mota, Rodolfo; Righini, Nicoletta; Raguet-Schofield, Melissa; Corcione, Fabiana Paola; Marini, Elisabetta; Humphrey, Greg; Gogul, Grant; Gaffney, James; Lovelace, Elijah; Williams, LaShanda; Luong, Albert; Dominguez-Bello, Maria Gloria; Stumpf, Rebecca M; White, Bryan; Nelson, Karen E; Knight, Rob; Leigh, Steven R
2016-03-01
Recent studies suggest that variation in diet across time and space results in changes in the mammalian gut microbiota. This variation may ultimately impact host ecology by altering nutritional status and health. Wild animal populations provide an excellent opportunity for understanding these interactions. However, compared to clinical studies, microbial research targeting wild animals is currently limited, and many published studies focus only on a single population of a single host species. In this study we utilize fecal samples from two species of howler monkey (Alouatta pigra and A. palliata) collected at four sites to investigate factors influencing the gut microbiota at three scales: taxonomic (host species), ecosystemic (forest type), and local (habitat disturbance/season). The results demonstrate that the effect of host species on the gut microbiota is stronger than the effect of host forest type, which is stronger than the effect of habitat disturbance or seasonality. Nevertheless, within host species, gut microbiota composition differs in response to forest type, habitat disturbance, and season. Variations in the effect size of these factors are associated both with host species and environment. This information may be beneficial for understanding ecological and evolutionary questions associated with Mesoamerican howler monkeys, as well as determining conservation challenges facing each species. These mechanisms may also provide insight into the ecology of other species of howler monkeys, non-human primates, and mammals.
Wu, Haibin; Guiot, Joël; Brewer, Simon; Guo, Zhengtang; Peng, Changhui
2007-01-01
The knowledge of tropical palaeoclimates is crucial for understanding global climate change, because it is a test bench for general circulation models that are ultimately used to predict future global warming. A longstanding issue concerning the last glacial maximum in the tropics is the discrepancy between the decrease in sea-surface temperatures reconstructed from marine proxies and the high-elevation decrease in land temperatures estimated from indicators of treeline elevation. In this study, an improved inverse vegetation modeling approach is used to quantitatively reconstruct palaeoclimate and to estimate the effects of different factors (temperature, precipitation, and atmospheric CO2 concentration) on changes in treeline elevation based on a set of pollen data covering an altitudinal range from 100 to 3,140 m above sea level in Africa. We show that lowering of the African treeline during the last glacial maximum was primarily triggered by regional drying, especially at upper elevations, and was amplified by decreases in atmospheric CO2 concentration and perhaps temperature. This contrasts with scenarios for the Holocene and future climates, in which the increase in treeline elevation will be dominated by temperature. Our results suggest that previous temperature changes inferred from tropical treeline shifts may have been overestimated for low-CO2 glacial periods, because the limiting factors that control changes in treeline elevation differ between glacial and interglacial periods. PMID:17535920
Wu, Haibin; Guiot, Joël; Brewer, Simon; Guo, Zhengtang; Peng, Changhui
2007-06-05
The knowledge of tropical palaeoclimates is crucial for understanding global climate change, because it is a test bench for general circulation models that are ultimately used to predict future global warming. A longstanding issue concerning the last glacial maximum in the tropics is the discrepancy between the decrease in sea-surface temperatures reconstructed from marine proxies and the high-elevation decrease in land temperatures estimated from indicators of treeline elevation. In this study, an improved inverse vegetation modeling approach is used to quantitatively reconstruct palaeoclimate and to estimate the effects of different factors (temperature, precipitation, and atmospheric CO(2) concentration) on changes in treeline elevation based on a set of pollen data covering an altitudinal range from 100 to 3,140 m above sea level in Africa. We show that lowering of the African treeline during the last glacial maximum was primarily triggered by regional drying, especially at upper elevations, and was amplified by decreases in atmospheric CO(2) concentration and perhaps temperature. This contrasts with scenarios for the Holocene and future climates, in which the increase in treeline elevation will be dominated by temperature. Our results suggest that previous temperature changes inferred from tropical treeline shifts may have been overestimated for low-CO(2) glacial periods, because the limiting factors that control changes in treeline elevation differ between glacial and interglacial periods.
Position statement. Part two: Maintaining immune health.
Walsh, Neil P; Gleeson, Michael; Pyne, David B; Nieman, David C; Dhabhar, Firdaus S; Shephard, Roy J; Oliver, Samuel J; Bermon, Stéphane; Kajeniene, Alma
2011-01-01
The physical training undertaken by athletes is one of a set of lifestyle or behavioural factors that can influence immune function, health and ultimately exercise performance. Others factors including potential exposure to pathogens, health status, lifestyle behaviours, sleep and recovery, nutrition and psychosocial issues, need to be considered alongside the physical demands of an athlete's training programme. The general consensus on managing training to maintain immune health is to start with a programme of low to moderate volume and intensity; employ a gradual and periodised increase in training volumes and loads; add variety to limit training monotony and stress; avoid excessively heavy training loads that could lead to exhaustion, illness or injury; include non-specific cross-training to offset staleness; ensure sufficient rest and recovery; and instigate a testing programme for identifying signs of performance deterioration and manifestations of physical stress. Inter-individual variability in immunocompetence, recovery, exercise capacity, non-training stress factors, and stress tolerance likely explains the different vulnerability of athletes to illness. Most athletes should be able to train with high loads provided their programme includes strategies devised to control the overall strain and stress. Athletes, coaches and medical personnel should be alert to periods of increased risk of illness (e.g. intensive training weeks, the taper period prior to competition, and during competition) and pay particular attention to recovery and nutritional strategies.
Kok, Lidwien; van der Waa, Anne; Klip, Helen; Staal, Wouter
2016-01-01
Children with intellectual disability frequently have difficulties in adapting to their environment. The extent of the experienced problems does not only depend on cognitive functioning but is influenced by other factors, such as the presence of a psychiatric disorder or other brain disorders, or adverse environmental factors. Several epidemiological studies show that children with intellectual disabilities are at an increased risk to develop psychiatric disorders. This is also true for youth with a mild intellectual disability and even those with borderline intellectual functioning (mild to borderline intellectual disability (MBID)). Psychiatric disorders are often overlooked because behavioral problems are rather attributed to the intellectual disability. Consequently, effective psychiatric interventions, which are needed to improve the level of functioning, are not applied. This review aimed to systematically evaluate the currently available, qualitatively sound research concerning the effectiveness of psychosocial interventions, specifically directed at psychiatric disorders in children with MBID. Assessed for eligibility were 1409 unique reports, and the review ultimately included only 12 reports. Review of the results and meta-analyses showed that the majority of studies suffer from multiple limitations and that methodological variations between studies are extensive. This possibly reflects the high variance of factors that may be involved in MBID. It will be important in future research to address multi-causality. © The Author(s) 2015.
Body temperatures in dinosaurs: what can growth curves tell us?
Griebeler, Eva Maria
2013-01-01
To estimate the body temperature (BT) of seven dinosaurs Gillooly, Alleen, and Charnov (2006) used an equation that predicts BT from the body mass and maximum growth rate (MGR) with the latter preserved in ontogenetic growth trajectories (BT-equation). The results of these authors evidence inertial homeothermy in Dinosauria and suggest that, due to overheating, the maximum body size in Dinosauria was ultimately limited by BT. In this paper, I revisit this hypothesis of Gillooly, Alleen, and Charnov (2006). I first studied whether BTs derived from the BT-equation of today's crocodiles, birds and mammals are consistent with core temperatures of animals. Second, I applied the BT-equation to a larger number of dinosaurs than Gillooly, Alleen, and Charnov (2006) did. In particular, I estimated BT of Archaeopteryx (from two MGRs), ornithischians (two), theropods (three), prosauropods (three), and sauropods (nine). For extant species, the BT value estimated from the BT-equation was a poor estimate of an animal's core temperature. For birds, BT was always strongly overestimated and for crocodiles underestimated; for mammals the accuracy of BT was moderate. I argue that taxon-specific differences in the scaling of MGR (intercept and exponent of the regression line, log-log-transformed) and in the parameterization of the Arrhenius model both used in the BT-equation as well as ecological and evolutionary adaptations of species cause these inaccuracies. Irrespective of the found inaccuracy of BTs estimated from the BT-equation and contrary to the results of Gillooly, Alleen, and Charnov (2006) I found no increase in BT with increasing body mass across all dinosaurs (Sauropodomorpha, Sauropoda) studied. This observation questions that, due to overheating, the maximum size in Dinosauria was ultimately limited by BT. However, the general high inaccuracy of dinosaurian BTs derived from the BT-equation makes a reliable test of whether body size in dinosaurs was ultimately limited by overheating impossible.
Body Temperatures in Dinosaurs: What Can Growth Curves Tell Us?
Griebeler, Eva Maria
2013-01-01
To estimate the body temperature (BT) of seven dinosaurs Gillooly, Alleen, and Charnov (2006) used an equation that predicts BT from the body mass and maximum growth rate (MGR) with the latter preserved in ontogenetic growth trajectories (BT-equation). The results of these authors evidence inertial homeothermy in Dinosauria and suggest that, due to overheating, the maximum body size in Dinosauria was ultimately limited by BT. In this paper, I revisit this hypothesis of Gillooly, Alleen, and Charnov (2006). I first studied whether BTs derived from the BT-equation of today’s crocodiles, birds and mammals are consistent with core temperatures of animals. Second, I applied the BT-equation to a larger number of dinosaurs than Gillooly, Alleen, and Charnov (2006) did. In particular, I estimated BT of Archaeopteryx (from two MGRs), ornithischians (two), theropods (three), prosauropods (three), and sauropods (nine). For extant species, the BT value estimated from the BT-equation was a poor estimate of an animal’s core temperature. For birds, BT was always strongly overestimated and for crocodiles underestimated; for mammals the accuracy of BT was moderate. I argue that taxon-specific differences in the scaling of MGR (intercept and exponent of the regression line, log-log-transformed) and in the parameterization of the Arrhenius model both used in the BT-equation as well as ecological and evolutionary adaptations of species cause these inaccuracies. Irrespective of the found inaccuracy of BTs estimated from the BT-equation and contrary to the results of Gillooly, Alleen, and Charnov (2006) I found no increase in BT with increasing body mass across all dinosaurs (Sauropodomorpha, Sauropoda) studied. This observation questions that, due to overheating, the maximum size in Dinosauria was ultimately limited by BT. However, the general high inaccuracy of dinosaurian BTs derived from the BT-equation makes a reliable test of whether body size in dinosaurs was ultimately limited by overheating impossible. PMID:24204568
Estuarine water quality and plankton community responses in the Pensacola Bay Estuary
Phytoplankton serve a centrally important role in estuaries forming the base of the food web. Thus factors that affect phytoplankton production and species composition cascades to higher trophic levels, ultimately affecting secondary production. Given their sensitivity to myriad ...
DOT National Transportation Integrated Search
2013-04-01
Columns are considered the most critical elements in structures. The unconfined analysis for columns is well established in the literature. Structural design codes dictate reduction factors for safety. It wasnt until very recently that design spec...
Atmosphere Selection for Long-duration Manned Space Missions
NASA Technical Reports Server (NTRS)
Hirsch, David B.
2007-01-01
This viewgraph reviews the spacecraft environment for future human space exploration missions. The choice of a atmosphere mix will play a critical role in the ultimate safety, productivity, and cost. There are a multitude of factors involved in selection of spacecraft environments.
Limits of quantitation - Yet another suggestion
NASA Astrophysics Data System (ADS)
Carlson, Jill; Wysoczanski, Artur; Voigtman, Edward
2014-06-01
The work presented herein suggests that the limit of quantitation concept may be rendered substantially less ambiguous and ultimately more useful as a figure of merit by basing it upon the significant figure and relative measurement error ideas due to Coleman, Auses and Gram, coupled with the correct instantiation of Currie's detection limit methodology. Simple theoretical results are presented for a linear, univariate chemical measurement system with homoscedastic Gaussian noise, and these are tested against both Monte Carlo computer simulations and laser-excited molecular fluorescence experimental results. Good agreement among experiment, theory and simulation is obtained and an easy extension to linearly heteroscedastic Gaussian noise is also outlined.
The cause of striae distensae.
Shuster, S
1979-01-01
Striae are always initiated by stretch whether the stretch is excessive or minimal: spontaneous striae do not occur. Cross-linkage of collagen appears to be more important than amount of collagen in permitting striae in response to stretch. An increase in cross linkage as in age increases the resistance to stretch deformation, but this rigidity leads ultimately to tearing of the skin and not striae. At the other extreme, the absence of crosslinkage leads to "elasticity" and excessive stretching with eventual rupture of the skin if the stretch goes beyond the elastic limit, but again, no striae. Striae appear to occur therefore only in skin in which the rigid cross-linked collagen and "elastic" unlinked collagen thus permitting a limited degree of stretch and a limited intradermal rupture, i.e. striae. (Although rigidity and elasticity are presented here in terms of collagen cross-linkage it seems probable that changes in interfibrillary materials such as glycosaminoglycans will prove important in this respect). This balance of stretch and limited tear is a continuous process and is an adaptation to the needs of growth in adolescence and change in body mass in early adult life and there are many many subclinical "striae" for each gross tear which is recognised clinically. An important factor likewise appears to be rate of stretch since if it is very slow, striae are less likely; there is "give" and new collagen formation. Although this working hypothesis is consonant with the facts only further work will show whether this smooth consonance is that of the fable or the weathered rock of fact.
Cooper, Ryan N; Wissel, Björn
2012-11-27
Salinity is restricting habitatability for many biota in prairie lakes due to limited physiological abilities to cope with increasing osmotic stress. Yet, it remains unclear how salinity effects vary among major taxonomic groups and what role other environmental parameters play in shaping food-web composition. To answer these questions, we sampled fish, zooplankton and littoral macroinvertebrates in 20 prairie lakes (Saskatchewan, Canada) characterized by large gradients in water chemistry and lake morphometry. We showed that salinity thresholds differed among major taxonomic groups, as most fishes were absent above salinities of 2 g L-1, while littoral macroinvertebrates were ubiquitous. Zooplankton occurred over the whole salinity range, but changed taxonomic composition as salinity increased. Subsequently, the complexity of fish community (diversity) was associated with large changes in invertebrate communities. The directional changes in invertebrate communities to smaller taxa indicated that complex fish assemblages resulted in higher predation pressure. Most likely, as the complexity of fish community decreased, controls of invertebrate assemblages shifted from predation to competition and ultimately to productivity in hypersaline lakes. Surprisingly, invertebrate predators did not thrive in the absence of fishes in these systems. Furthermore, the here identified salinity threshold for fishes was too low to be a result of osmotic stress. Hence, winterkill was likely an important factor eliminating fishes in low salinity lakes that had high productivity and shallow water depth. Ultimately, while salinity was crucial, intricate combinations of chemical and biological mechanisms also played a major role in controlling the assemblages of major taxonomic groups in prairie lakes.
Pulmonary vasculature and critical asthma syndromes: a comprehensive review.
Avdalovic, Mark
2015-02-01
One of the important factors and consequences in persistent asthma is the change in the vasculature of the airways and lung parenchyma. These changes could contribute to worsening asthma control and predispose asthmatics to critical asthma syndromes. For many years, the contribution of vasculature to severe asthma was limited to discussion of small and medium vessel vasculitis commonly referred to as Churg-Strauss syndrome. This comprehensive review will explore the known mechanisms that are associated with remodeling of the vasculature in a variety of critical asthma presentations. Inflammation of pulmonary and bronchial small blood vessels may contribute significantly but silently to asthma pathobiology. Inflammation in the vasculature of the lung parenchyma can decrease lung capacity while inflammation in airway vasculature can decrease airflow. This review will provide a modern perspective on Churg-Strauss syndromes with a focus on phenotyping, mechanism, and ultimately modern therapeutic approaches. Vascular remodeling and airway remodeling are not mutually exclusive concepts in understanding the progression of asthma and frequency of acute exacerbations. Furthermore, the contribution of vascular leak, particularly in the parenchymal vasculature, has become an increasingly recognized component of certain presentations of poorly controlled, severe persistent asthmatic and during exacerbations. We highlight how these mechanisms can contribute to some the severe presentations of influenza infection in patients with a history of asthma. The ultimate aim of this review is to summarize the current literature concerning vasculitis and the contribution of airway and parenchymal vascular remodeling to presentation of persistent asthma and its consequences during acute exacerbations and critical asthma syndromes.
The role of ecosystem memory in predicting inter-annual variations of the tropical carbon balance.
NASA Astrophysics Data System (ADS)
Bloom, A. A.; Liu, J.; Bowman, K. W.; Konings, A. G.; Saatchi, S.; Worden, J. R.; Worden, H. M.; Jiang, Z.; Parazoo, N.; Williams, M. D.; Schimel, D.
2017-12-01
Understanding the trajectory of the tropical carbon balance remains challenging, in part due to large uncertainties in the integrated response of carbon cycle processes to climate variability. Satellite observations atmospheric CO2 from GOSAT and OCO-2, together with ancillary satellite measurements, provide crucial constraints on continental-scale terrestrial carbon fluxes. However, an integrated understanding of both climate forcings and legacy effects (or "ecosystem memory") on the terrestrial carbon balance is ultimately needed to reduce uncertainty on its future trajectory. Here we use the CARbon DAta-MOdel fraMework (CARDAMOM) diagnostic model-data fusion approach - constrained by an array of C cycle satellite surface observations, including MODIS leaf area, biomass, GOSAT solar-induced fluorescence, as well as "top-down" atmospheric inversion estimates of CO2 and CO surface fluxes from the NASA Carbon Monitoring System Flux (CMS-Flux) - to constrain and predict spatially-explicit tropical carbon state variables during 2010-2015. We find that the combined assimilation of land surface and atmospheric datasets places key constraints on the temperature sensitivity and first order carbon-water feedbacks throughout the tropics and combustion factors within biomass burning regions. By varying the duration of the assimilation period, we find that the prediction skill on inter-annual net biospheric exchange is primarily limited by record length rather than model structure and process representation. We show that across all tropical biomes, quantitative knowledge of memory effects - which account for 30-50% of interannual variations across the tropics - is critical for understanding and ultimately predicting the inter-annual tropical carbon balance.
Settepani, V; Schou, M F; Greve, M; Grinsted, L; Bechsgaard, J; Bilde, T
2017-08-01
Across several animal taxa, the evolution of sociality involves a suite of characteristics, a "social syndrome," that includes cooperative breeding, reproductive skew, primary female-biased sex ratio, and the transition from outcrossing to inbreeding mating system, factors that are expected to reduce effective population size (Ne). This social syndrome may be favoured by short-term benefits but come with long-term costs, because the reduction in Ne amplifies loss of genetic diversity by genetic drift, ultimately restricting the potential of populations to respond to environmental change. To investigate the consequences of this social life form on genetic diversity, we used a comparative RAD-sequencing approach to estimate genomewide diversity in spider species that differ in level of sociality, reproductive skew and mating system. We analysed multiple populations of three independent sister-species pairs of social inbreeding and subsocial outcrossing Stegodyphus spiders, and a subsocial outgroup. Heterozygosity and within-population diversity were sixfold to 10-fold lower in social compared to subsocial species, and demographic modelling revealed a tenfold reduction in Ne of social populations. Species-wide genetic diversity depends on population divergence and the viability of genetic lineages. Population genomic patterns were consistent with high lineage turnover, which homogenizes the genetic structure that builds up between inbreeding populations, ultimately depleting genetic diversity at the species level. Indeed, species-wide genetic diversity of social species was 5-8 times lower than that of subsocial species. The repeated evolution of species with this social syndrome is associated with severe loss of genomewide diversity, likely to limit their evolutionary potential. © 2017 John Wiley & Sons Ltd.
2012-01-01
Salinity is restricting habitatability for many biota in prairie lakes due to limited physiological abilities to cope with increasing osmotic stress. Yet, it remains unclear how salinity effects vary among major taxonomic groups and what role other environmental parameters play in shaping food-web composition. To answer these questions, we sampled fish, zooplankton and littoral macroinvertebrates in 20 prairie lakes (Saskatchewan, Canada) characterized by large gradients in water chemistry and lake morphometry. We showed that salinity thresholds differed among major taxonomic groups, as most fishes were absent above salinities of 2 g L-1, while littoral macroinvertebrates were ubiquitous. Zooplankton occurred over the whole salinity range, but changed taxonomic composition as salinity increased. Subsequently, the complexity of fish community (diversity) was associated with large changes in invertebrate communities. The directional changes in invertebrate communities to smaller taxa indicated that complex fish assemblages resulted in higher predation pressure. Most likely, as the complexity of fish community decreased, controls of invertebrate assemblages shifted from predation to competition and ultimately to productivity in hypersaline lakes. Surprisingly, invertebrate predators did not thrive in the absence of fishes in these systems. Furthermore, the here identified salinity threshold for fishes was too low to be a result of osmotic stress. Hence, winterkill was likely an important factor eliminating fishes in low salinity lakes that had high productivity and shallow water depth. Ultimately, while salinity was crucial, intricate combinations of chemical and biological mechanisms also played a major role in controlling the assemblages of major taxonomic groups in prairie lakes. PMID:23186395
The new genetic technologies: why a theological perspective is necessary.
Engelhardt, H Tristram
2003-01-01
Secular bioethics poses questions that can be recognized as important, though it lacks the resources to answer them. Secular bioethics may retain the sense that there should be moral limits to the use of germline genetic engineering, but it lacks the basis to justify limits in principle. The contemporary practice of bioethics arose in the United States to fill a moral vacuum created by (1) the marginalization of medical ethics through the deprofessionalization of medicine, (2) the secularization of American society, and (3) an increased reliance on individual decision-making. The result is an ethics at the core of secular bioethics severed from a sense of ultimate purpose or direction for humans or the cosmos. This ethics and its bioethics are marked by (1) moral fragmentation and pluralism and (2) a loss of ultimate orientation. This bioethics can at best require (1) the prudent maximization of benefits over harms, (2) the condemnation of malevolent acts, and (3) the use of persons only with their consent. However, there fails to be a basis for a common view of benefit or of harm. Within this impoverished moral context, human biological nature can only appear to be a contingent outcome of spontaneous mutations, selective pressure, the constraints of physical laws, and random catastrophes. Such a bioethics, deprived of ultimate orientation, can provide no ground in principle for forbidding cloning, germline genetic engineering, or the fundamental recasting of human nature. Absent a theological point of orientation, medicine and the genetic technology are left with more power than ever but no clear moral sense of how to use that power.
Mycorrhizal specificity does not limit the distribution of an endangered orchid species.
Waud, Michael; Brys, Rein; Van Landuyt, Wouter; Lievens, Bart; Jacquemyn, Hans
2017-03-01
What factors determine the distribution of a species is a central question in ecology and conservation biology. In general, the distribution of plant species is assumed to be controlled by dispersal or environmentally controlled recruitment. For plant species which are critically dependent on mycorrhizal symbionts for germination and seedling establishment, specificity in mycorrhizal associations and availability of suitable mycorrhizal fungi can be expected to have a major impact on successful colonization and establishment and thus ultimately on a species distribution. We combined seed germination experiments with soil analyses and fungal assessments using 454 amplicon pyrosequencing to test the relative importance of dispersal limitation, mycorrhizal availability and local growth conditions on the distribution of the orchid species Liparis loeselii, which, despite being widely distributed, is rare and endangered in Europe. We compared local soil conditions, seed germination and mycorrhizal availability in the soil between locations in northern Belgium and France where L. loeselii occurs naturally and locations where conditions appear suitable, but where adults of the species are absent. Our results indicated that mycorrhizal communities associating with L. loeselii varied among sites and plant life cycle stages, but the observed variations did not affect seed germination, which occurred regardless of current L. loeselii presence and was significantly affected by soil moisture content. These results indicate that L. loeselii is a mycorrhizal generalist capable of opportunistically associating with a variety of fungal partners to induce seed germination. They also indicate that availability of fungal associates is not necessarily the determining factor driving the distribution of mycorrhizal plant species. © 2017 John Wiley & Sons Ltd.
Physical and Chemical Microstructural Damage in Pressed CL-20 explosives
NASA Astrophysics Data System (ADS)
Demol, Gauthier; Sandusky, Harold W.
1999-06-01
Based upon its molecular composition, its structure, and its heat of formation, it was expected that CL-20 (hexanitrohexaazaisowurtzitane) would be more energetic and more sensitive than RDX and HMX. Reports of batch-to-batch variations in the sensitivity of neat CL-20 have led to its sensitivity being ranked in the range between the sensitivity of RDX and that of PETN. The ultimate utility of CL-20 as an ingredient in explosive and propellant formulations will depend upon the ability to understand the factors that are responsible for this batch-to-batch variability, and to control the sensitivity in formulations within acceptable limits. This work is a characterization of CL-20 at various stages in its life cycle. The evolution of damage from the initial neat crystals of CL-20 to the ready-to-use pressed pellets will be described. This characterization includes physical documentation using light microscopy and Scanning Electron Microscopy. Spatially resolved chemical analysis is also performed using Fourier-Transform Infrared Spectroscopy.
Kohrt, Brandon A.; Bourey, Christine
2016-01-01
Our objective was to elucidate how culture influences internal (psychological), external (social), institutional (structural), and health care (medical) processes, which, taken together, create differential risk of comorbidity across contexts. To develop a conceptual model, we conducted qualitative research with 13 female child soldiers in Nepal. Participants gave open-ended responses to intimate partner violence (IPV) vignettes (marital rape, emotional abuse, violence during pregnancy). Twelve participants (92%) endorsed personal responses (remaining silent, enduring violence, forgiving the husband). Twelve participants endorsed communication with one’s husband. Only four participants (31%) sought family support, and three contacted police. Ultimately, 12 participants left the relationship, but the majority (nine) only left after the final IPV experience, which was preceded by prolonged psychological suffering and pregnancy endangerment. In conclusion, comorbidity risks are increased in cultural context that rely on individual or couples-only behavior, lack external social engagement, have weak law and justice institutions, and have limited health services. PMID:27558762
Preventing intimate partner violence through paid parental leave policies.
D'Inverno, Ashley Schappell; Reidy, Dennis E; Kearns, Megan C
2018-05-30
Paid parental leave policies have the potential to strengthen economic supports, reduce family discord, and provide opportunities to empower women (Basile et al., 2016; Niolon et al., 2017). In this article, we present a theory of change and evidence to suggest how paid parental leave may impact intimate partner violence (IPV). In doing so, we present three mechanisms of change (i.e., reduction in financial stress, increase in egalitarian parenting practices, and promotion of child/parent bonding) through which paid parental leave could reduce rates of IPV. We also describe limitations of the current state of knowledge in this area, as well as opportunities for future research. Ultimately, our goal is to facilitate the identification and implementation of approaches that have the potential to reduce violence at the population level. Paid parental leave embodies the potential of policies to change societal-level factors and serve as an important prevention strategy for IPV. Copyright © 2018. Published by Elsevier Inc.
Importance of Relating Efficacy Measures to Unbound Drug Concentrations for Anti-Infective Agents
Gonzalez, Daniel; Schmidt, Stephan
2013-01-01
SUMMARY For the optimization of dosing regimens of anti-infective agents, it is imperative to have a good understanding of pharmacokinetics (PK) and pharmacodynamics (PD). Whenever possible, drug efficacy needs to be related to unbound concentrations at the site of action. For anti-infective drugs, the infection site is typically located outside plasma, and a drug must diffuse through capillary membranes to reach its target. Disease- and drug-related factors can contribute to differential tissue distribution. As a result, the assumption that the plasma concentration of drugs represents a suitable surrogate of tissue concentrations may lead to erroneous conclusions. Quantifying drug exposure in tissues represents an opportunity to relate the pharmacologically active concentrations to an observed pharmacodynamic parameter, such as the MIC. Selection of an appropriate specimen to sample and the advantages and limitations of the available sampling techniques require careful consideration. Ultimately, the goal will be to assess the appropriateness of a drug and dosing regimen for a specific pathogen and infection. PMID:23554417
Analysis of Ricefield Land Damage in Denpasar City, Bali, Indonesia
NASA Astrophysics Data System (ADS)
Suyarto, R.; Wiyanti; Dibia, I. N.
2018-02-01
Soil as a natural resource, living area, environmental media, and factors of production including biomass production that supports human life and other living beings must be preserved, on the other hand, uncontrolled biomass production activities can cause soil damage, ultimately can threaten the survival of humans and other living things. Therefore, in order to control soil damage, first must inventories the soil condition data and its damage which then visualised in soil damage potential and soil damage status. The activities of the study are the preparation of a map of the initial soil conditions and the delineation of potentially land degradation distribution. Mapping results are used as work maps for verification on the field to take soil samples and create soil damage status. In general, Denpasar City have soil damage potential at very low, low until medium rate. Soil damage status in Denpasar City generally is low damage of bulk volume, total porosity, soil permeability and electrolyte conductivity which beyond limitation thresholds.
Overcoming substrate limitations for improved production of ethylene in E. coli
Lynch, Sean; Eckert, Carrie; Yu, Jianping; ...
2016-01-04
Ethylene is an important industrial compound for the production of a wide variety of plastics and chemicals. At present, ethylene production involves steam cracking of a fossil-based feedstock, representing the highest CO 2-emitting process in the chemical industry. Biological ethylene production can be achieved via expression of a single protein, the ethylene-forming enzyme (EFE), found in some bacteria and fungi; it has the potential to provide a sustainable alternative to steam cracking, provided that significant increases in productivity can be achieved. A key barrier is determining factors that influence the availability of substrates for the EFE reaction in potential microbialmore » hosts. In the presence of O 2, EFE catalyzes ethylene formation from the substrates α-ketoglutarate (AKG) and arginine. The concentrations of AKG, a key TCA cycle intermediate, and arginine are tightly controlled by an intricate regulatory system that coordinates carbon and nitrogen metabolism. Thus, reliably predicting which genetic changes will ultimately lead to increased AKG and arginine availability is challenging.« less
Donations After Circulatory Death in Liver Transplant
Eren, Emre A.; Latchana, Nicholas; Beal, Eliza; Hayes, Don; Whitson, Bryan; Black, Sylvester M.
2017-01-01
The supply of liver grafts for treatment of end-stage liver disease continues to fall short of ongoing demands. Currently, most liver transplants originate from donations after brain death. Enhanced utilization of the present resources is prudent to address the needs of the population. Donation after circulatory or cardiac death is a mechanism whereby the availability of organs can be expanded. Donations after circulatory death pose unique challenges given their exposure to warm ischemia. Technical principles of donations after circulatory death procurement and pertinent studies investigating patient outcomes, graft outcomes, and complications are highlighted in this review. We also review associated risk factors to suggest potential avenues to achieve improved outcomes and reduced complications. Future considerations and alternative techniques of organ preservation are discussed, which may suggest novel strategies to enhance preservation and donor expansion through the use of marginal donors. Ultimately, without effective measures to bolster organ supply, donations after circulatory death should remain a consideration; however, an understanding of inherent risks and limitations is necessary. PMID:27733105
On Approaching the Ultimate Limits of Communication Using a Photon-Counting Detector
NASA Technical Reports Server (NTRS)
Erkmen, Baris I.; Moision, Bruce E.; Dolinar, Samuel J.; Birnbaum, Kevin M.; Divsalar, Dariush
2012-01-01
Coherent states achieve the Holevo capacity of a pure-loss channel when paired with an optimal measurement, but a physical realization of this measurement scheme is as of yet unknown, and it is also likely to be of high complexity. In this paper, we focus on the photon-counting measurement and study the photon and dimensional efficiencies attainable with modulations over classical- and nonclassical-state alphabets. We analyze two binary modulation architectures that improve upon the dimensional versus photon efficiency tradeoff achievable with the state-of-the-art coherent-state on-off keying modulation. We show that at high photon efficiency these architectures achieve an efficiency tradeoff that differs from the best possible tradeoff--determined by the Holevo capacity--by only a constant factor. The first architecture we analyze is a coherent-state transmitter that relies on feedback from the receiver to control the transmitted energy. The second architecture uses a single-photon number-state source.
Characteristics of ballistic and blast injuries.
Powers, David B; Delo, Robert I
2013-03-01
Ballistic injury wounds are formed by variable interrelated factors, such as the nature of the tissue, the compositional makeup of the bullet, distance to the target, and the velocity, shape, and mass of the of the projectile. This complex arrangement, with the ultimate outcome dependent on each other, makes the prediction of wounding potential difficult to assess. As the facial features are the component of the body most involved in a patient's personality and interaction with society, preservation of form, cosmesis, and functional outcome should remain the primary goals in the management of ballistic injury. A logical, sequential analysis of the injury patterns to the facial complex is an absolutely necessary component for the treatment of craniomaxillofacial ballistic injuries. Fortunately, these skill sets should be well honed in all craniomaxillofacial surgeons through their exposure to generalized trauma, orthognathic, oncologic, and cosmetic surgery patients. Identification of injured tissues, understanding the functional limitations of these injuries, and preservation of both hard and soft tissues minimizing the need for tissue replacement are paramount.
Tumor Microenvironment, a Paradigm in Hepatocellular Carcinoma Progression and Therapy
Tahmasebi Birgani, Maryam; Carloni, Vinicio
2017-01-01
Hepatocellular carcinoma (HCC) is among the most lethal and prevalent cancers in the human population. Different etiological factors such as hepatitis B and C virus, alcohol and diabetes cause liver injury followed by inflammation, necrosis and hepatocytes proliferation. Continuous cycles of this destructive–regenerative process culminates in liver cirrhosis which is characterized by regenerating nodules that progress to dysplastic nodules and ultimately HCC. Despite its significance, there is only an elemental understanding of the pathogenetic mechanisms, and there are only limited therapeutic options. Therefore, the study of the involved molecular mechanisms can open a new insight to define more effective treatment strategies. A variety of alterations have been reported in HCC patients, particularly the cancer-associated microenvironment components including immune cells, fibroblast cells, endothelial cells and extracellular matrix can support the neoplastic cells to proliferate, growth and invade. This review summarizes the current state of knowledge and highlights the principal challenges that are relevant to controlling this milieu. PMID:28216578
Genetics and epigenetics of rheumatoid arthritis
Viatte, Sebastien; Plant, Darren; Raychaudhuri, Soumya
2013-01-01
Investigators have made key advances in rheumatoid arthritis (RA) genetics in the past 10 years. Although genetic studies have had limited influence on clinical practice and drug discovery, they are currently generating testable hypotheses to explain disease pathogenesis. Firstly, we review here the major advances in identifying RA genetic susceptibility markers both within and outside of the MHC. Understanding how genetic variants translate into pathogenic mechanisms and ultimately into phenotypes remains a mystery for most of the polymorphisms that confer susceptibility to RA, but functional data are emerging. Interplay between environmental and genetic factors is poorly understood and in need of further investigation. Secondly, we review current knowledge of the role of epigenetics in RA susceptibility. Differences in the epigenome could represent one of the ways in which environmental exposures translate into phenotypic outcomes. The best understood epigenetic phenomena include post-translational histone modifications and DNA methylation events, both of which have critical roles in gene regulation. Epigenetic studies in RA represent a new area of research with the potential to answer unsolved questions. PMID:23381558
Donations After Circulatory Death in Liver Transplant.
Eren, Emre A; Latchana, Nicholas; Beal, Eliza; Hayes, Don; Whitson, Bryan; Black, Sylvester M
2016-10-01
The supply of liver grafts for treatment of end-stage liver disease continues to fall short of ongoing demands. Currently, most liver transplants originate from donations after brain death. Enhanced utilization of the present resources is prudent to address the needs of the population. Donation after circulatory or cardiac death is a mechanism whereby the availability of organs can be expanded. Donations after circulatory death pose unique challenges given their exposure to warm ischemia. Technical principles of donations after circulatory death procurement and pertinent studies investigating patient outcomes, graft outcomes, and complications are highlighted in this review. We also review associated risk factors to suggest potential avenues to achieve improved outcomes and reduced complications. Future considerations and alternative techniques of organ preservation are discussed, which may suggest novel strategies to enhance preservation and donor expansion through the use of marginal donors. Ultimately, without effective measures to bolster organ supply, donations after circulatory death should remain a consideration; however, an understanding of inherent risks and limitations is necessary.
Internal transport barrier dynamics with plasma rotation in JET
NASA Astrophysics Data System (ADS)
de Vries, P. C.; Joffrin, E.; Brix, M.; Challis, C. D.; Crombé, K.; Esposito, B.; Hawkes, N. C.; Giroud, C.; Hobirk, J.; Lönnroth, J.; Mantica, P.; Strintzi, D.; Tala, T.; Voitsekhovitch, I.; JET-EFDA Contributors to the Work Programme
2009-07-01
At JET the dynamics of internal transport barriers (ITBs) has been explored by trying to decouple the effects of heating on the one hand and torque on the other with the ultimate objective of identifying the minimum torque required for the formation of transport barriers. The experiments shed light on the physics behind the initial trigger for ITBs, which often shows to be linked to the shape of the q profile and magnetic shear, while the further development was influenced by the strength of the rotational shear. In discharges with a small amount of rotational shear ITBs were triggered, which suggest that the overall rotational shear is not the dominant factor in the triggering process. However, the subsequent growth of the barrier was limited if the rotational shear was too low at the time of triggering. This growth phase may be highly non-linear, with several possible positive feedback loops, such as the increases in the toroidal and poloidal component of the rotational shear caused by the ITB itself.
Meaningful use: a roadmap for the advancement of health information exchange
2013-01-01
Frankel and colleagues have compared Israel and the U.S.’s experiences with health information exchange (HIE). They highlight the importance of institutional factors in fostering HIE development, notably the influence of local structures, experience and incentives. Historically, information infrastructure in the U.S. has been limited due to lack of standards, fragmented institutions and competition. The Health Information Technology for Economic and Clinical Health (HITECH) Act of 2009 authorized billions of dollars for the adoption and “Meaningful Use” of electronic health records. HITECH programs and Meaningful Use incentives target the advancement of HIE through 1) building blocks, 2) local support and 3) payment incentives. Meaningful Use requirements create a roadmap to broader electronic exchange of health information among providers and with patients. Ultimately, successful HIE in the U.S. will depend on whether Meaningful Use can address institutional needs within local markets. This is a commentary on http://www.ijhpr.org/content/2/1/722 PMID:23880399
Biomass for energy in the European Union - a review of bioenergy resource assessments
2012-01-01
This paper reviews recent literature on bioenergy potentials in conjunction with available biomass conversion technologies. The geographical scope is the European Union, which has set a course for long term development of its energy supply from the current dependence on fossil resources to a dominance of renewable resources. A cornerstone in European energy policies and strategies is biomass and bioenergy. The annual demand for biomass for energy is estimated to increase from the current level of 5.7 EJ to 10.0 EJ in 2020. Assessments of bioenergy potentials vary substantially due to methodological inconsistency and assumptions applied by individual authors. Forest biomass, agricultural residues and energy crops constitute the three major sources of biomass for energy, with the latter probably developing into the most important source over the 21st century. Land use and the changes thereof is a key issue in sustainable bioenergy production as land availability is an ultimately limiting factor. PMID:22546368
NASA Astrophysics Data System (ADS)
Poehlman, W. F. S.; Garland, Wm. J.; Stark, J. W.
1993-06-01
In an era of downsizing and a limited pool of skilled accelerator personnel from which to draw replacements for an aging workforce, the impetus to integrate intelligent computer automation into the accelerator operator's repertoire is strong. However, successful deployment of an "Operator's Companion" is not trivial. Both graphical and human factors need to be recognized as critical areas that require extra care when formulating the Companion. They include interactive graphical user's interface that mimics, for the operator, familiar accelerator controls; knowledge of acquisition phases during development must acknowledge the expert's mental model of machine operation; and automated operations must be seen as improvements to the operator's environment rather than threats of ultimate replacement. Experiences with the PACES Accelerator Operator Companion developed at two sites over the past three years are related and graphical examples are given. The scale of the work involves multi-computer control of various start-up/shutdown and tuning procedures for Model FN and KN Van de Graaff accelerators. The response from licensing agencies has been encouraging.
Free-Standing Organic Transistors and Circuits with Sub-Micron Thicknesses
Fukuda, Kenjiro; Sekine, Tomohito; Shiwaku, Rei; Morimoto, Takuya; Kumaki, Daisuke; Tokito, Shizuo
2016-01-01
The realization of wearable electronic devices with extremely thin and flexible form factors has been a major technological challenge. While substrates typically limit the thickness of thin-film electronic devices, they are usually necessary for their fabrication and functionality. Here we report on ultra-thin organic transistors and integrated circuits using device components whose substrates that have been removed. The fabricated organic circuits with total device thicknesses down to 350 nm have electrical performance levels close to those fabricated on conventional flexible substrates. Moreover, they exhibit excellent mechanical robustness, whereby their static and dynamic electrical characteristics do not change even under 50% compressive strain. Tests using systematically applied compressive strains reveal that these free-standing organic transistors possess anisotropic mechanical stability, and a strain model for a multilayer stack can be used to describe the strain in this sort of ultra-thin device. These results show the feasibility of ultimate-thin organic electronic devices using free-standing constructions. PMID:27278828
Customization of ¹³C-MFA strategy according to cell culture system.
Quek, Lake-Ee; Nielsen, Lars K
2014-01-01
(13)C-MFA is far from being a simple assay for quantifying metabolic activity. It requires considerable up-front experimental planning and familiarity with the cell culture system in question, as well as optimized analytics and adequate computation frameworks. The success of a (13)C-MFA experiment is ultimately rated by the ability to accurately quantify the flux of one or more reactions of interest. In this chapter, we describe the different (13)C-MFA strategies that have been developed for the various fermentation or cell culture systems, as well as the limitations of the respective strategies. The strategies are affected by many factors and the (13)C-MFA modeling and experimental strategy must be tailored to conditions. The prevailing philosophy in the computation process is that any metabolic processes that produce significant systematic bias in the labeling pattern of the metabolites being measured must be described in the model. It is equally important to plan a labeling strategy by analytical screening or by heuristics.
Factors of importance for maintaining work as perceived by men with arthritis.
Österholm, Johannes Hjalmarsson; Björk, Mathilda; Håkansson, Carita
2013-01-01
Employment rates are significantly lower among individuals with arthritis compared to a general population. There is, however, limited research about how men with arthritis perceive their ability to maintain working. The aim of this study was thus to explore their perception of this. Nine employed men with arthritis were purposively sampled. Interviews were performed and were informed by the central concepts of the Model of Human Occupation. The Empirical Phenomenological Psychological method was modified and used to analyze and interpret collected data. The findings showed that men with arthritis perceived a desire to work, adjusted their activity pattern, were aware of their own capabilities, had good work conditions, had environmental support and used effective medication to maintain their ability to work. The findings suggest that health care professionals can help men with arthritis to find strategies and a balance between recreation and work. Ultimately, this knowledge could guide health care professionals to target men needing interventions to prevent sick leave.
Ultimate patterning limits for EUV at 5nm node and beyond
NASA Astrophysics Data System (ADS)
Ali, Rehab Kotb; Hamed Fatehy, Ahmed; Lafferty, Neal; Word, James
2018-03-01
The 5nm technology node introduces more aggressive geometries than previous nodes. In this paper, we are introducing a comprehensive study to examine the pattering limits of EUV at 0.33NA. The study is divided into two main approaches: (A) Exploring pattering limits of Single Exposure EUV Cut/Block mask in Self-Aligned-Multi-Patterning (SAMP) process, and (B) Exploring the pattering limits of a Single Exposure EUV printing of metal Layers. The printability of the resulted OPC masks is checked through a model based manufacturing flow for the two pattering approaches. The final manufactured patterns are quantified by Edge Placement Error (EPE), Process Variation Band (PVBand), soft/hard bridging and pinching, Image Log Slope (ILS) and Common Depth of Focus (CDOF)
How to reduce your cancer risk: mechanisms and myths
Nahleh, Zeina; Bhatti, Narinder Singh; Mal, Meenakshi
2011-01-01
Cancer prevention continues to be a high research priority and the most optimal way to ultimately lower the economic and psychological burden of cancer. Many known risk factors associated with cancer are related to dietary and lifestyle factors and can be avoided. These risk factors include among others, smoking, obesity, alcohol, physical inactivity, and carcinogens in diet. This article reviews the biological mechanisms leading to cancer in association with these factors, highlights important achievable cancer prevention methods, addresses commonly asked questions about lifestyle and cancer, and dispels some of the myths about cancer prevention. PMID:21556314
ERIC Educational Resources Information Center
Grupp, Stanley E.
1984-01-01
Examines the punishment issue and considers factors contributing to the dilemma. Questions and selected comments are offered concerning the major contenders in the dilemma: retribution, deterrence, rehabilitation, and integration. The resolution of the punishment must ultimately come to terms with the question, what values do we try to support and…
Organizational Influences on the University Electronic Library.
ERIC Educational Resources Information Center
Davies, Clare
1997-01-01
Reviews the literature on the development of full-text electronic libraries in the academic setting. Organizational factors can have impact on electronic library development and ultimate usability. Topics include strategic management, planning and implementation; system specification and design; document provision; user support and training; and…
Methods for forecasting freight in uncertainty : time series analysis of multiple factors.
DOT National Transportation Integrated Search
2011-01-31
The main goal of this research was to analyze and more accurately model freight movement in : Alabama. Ultimately, the goal of this project was to provide an overall approach to the : integration of accurate freight models into transportation plans a...
Human iPSC-Derived Endothelial Cell Sprouting Assay in Synthetic Hydrogel Arrays
Activation of vascular endothelial cells (ECs) by growth factors initiates a cascade of events in vivo consisting of EC tip cell selection, sprout formation, EC stalk cell proliferation, and ultimately vascular stabilization by support cells. Although EC functional assays can rec...
Mechanical Strength of the Side-to-Side Tendon Attachment for Mismatched Tendon Sizes and Shapes
Fridén, Jan; Tirrell, Timothy F.; Bhola, Siddharth; Lieber, Richard L.
2015-01-01
Summary Certain combinations are advised against in tendon transfers due to size or shape mismatches between donor and recipient tendons. In this study, ultimate load, stiffness and Young’s modulus were measured in two tendon-to-tendon attachments with intentionally mismatched donor and recipient tendons - pronator teres (PT)-to-extensor carpi radialis brevis (ECRB) and flexor carpi ulnaris (FCU)-to-extensor digitorum communis (EDC). FCU-EDC attachments failed at higher loads than PT-to-ECRB attachments but they had similar modulus and stiffness values. Ultimate tensile strength of the tendon attachments exceeded the maximum predicted contraction force of any of the affected muscles, with safety factors of 4x and 2x for the FCU-to-EDC and PT-to-ECRB constructs, respectively. This implies that size and shape mismatch should not be a contraindication to tendon attachment in transfers. Further, these safety factors strongly suggest that no postoperative immobilization of these attachments is necessary. PMID:24413573
NASA Astrophysics Data System (ADS)
Zhang, Dehua; Zhou, Huiqiu
2011-10-01
Under great background of financial crisis, large fluctuation on international foodstuff price and frequent happening of natural disasters, each nation attaches importance to foodstuff safety problem increasingly. As a Great Power of population, China pays more attention to foodstuff safety problem definitely. Large foodstuff provinces play a major role on ensuring it. The paper arrives at the conclusion that each province has advantages and disadvantages in different factors through factor analyses on influencing factors of integrated production capacity of foodstuff in each province. Then we arrange the factor score, analyze the result of each large foodstuff province and ultimately give out feasible suggestions.
Stowe-Evans, Emily L.; Luesse, Darron R.; Liscum, Emmanuel
2001-01-01
The induction of phototropism in etiolated (dark-grown) seedlings exposed to an unidirectional pulse or extended irradiation with low fluence rate blue light (BL) requires the action of the phototropin (nph1) BL receptor. Although cryptochromes and phytochromes are not required for phototropic induction, these photoreceptors do modulate the magnitude of curvature resulting from phototropin activation. Modulatory increases in the magnitude of phototropic curvature have been termed “enhancement.” Here, we show that phototropic enhancement is primarily a phytochrome A (phyA)-dependent red/far-red-reversible low fluence response. This phyA-dependent response is genetically separable from the basal phototropin-dependent response, as demonstrated by its retention under extended irradiation conditions in the nph4 mutant background, which normally lacks the basal BL-induced response. It is interesting that the nph4 mutants fail to exhibit the basal phototropin-dependent and phyA-dependent enhancement responses under limiting light conditions. Given that NPH4 encodes a transcriptional activator, auxin response factor 7 (ARF7), we hypothesize that the ultimate target(s) of phyA action during the phototropic enhancement response is a rate-limiting ARF-containing transcriptional complex in which the constituent ARFs can vary in identity or activity depending upon the irradiation condition. PMID:11402210
Are larger dental practices more efficient? An analysis of dental services production.
Lipscomb, J; Douglass, C W
1986-01-01
Whether cost-efficiency in dental services production increases with firm size is investigated through application of an activity analysis production function methodology to data from a national survey of dental practices. Under this approach, service delivery in a dental practice is modeled as a linear programming problem that acknowledges distinct input-output relationships for each service. These service-specific relationships are then combined to yield projections of overall dental practice productivity, subject to technical and organizational constraints. The activity analysis reported here represents arguably the most detailed evaluation yet of the relationship between dental practice size and cost-efficiency, controlling for such confounding factors as fee and service-mix differences across firms. We conclude that cost-efficiency does increase with practice size, over the range from solo to four-dentist practices. Largely because of data limitations, we were unable to test satisfactorily for scale economies in practices with five or more dentists. Within their limits, our findings are generally consistent with results from the neoclassical production function literature. From the standpoint of consumer welfare, the critical question raised (but not resolved) here is whether these apparent production efficiencies of group practice are ultimately translated by the market into lower fees, shorter queues, or other nonprice benefits. PMID:3102404
Latency in Visionic Systems: Test Methods and Requirements
NASA Technical Reports Server (NTRS)
Bailey, Randall E.; Arthur, J. J., III; Williams, Steven P.; Kramer, Lynda J.
2005-01-01
A visionics device creates a pictorial representation of the external scene for the pilot. The ultimate objective of these systems may be to electronically generate a form of Visual Meteorological Conditions (VMC) to eliminate weather or time-of-day as an operational constraint and provide enhancement over actual visual conditions where eye-limiting resolution may be a limiting factor. Empirical evidence has shown that the total system delays or latencies including the imaging sensors and display systems, can critically degrade their utility, usability, and acceptability. Definitions and measurement techniques are offered herein as common test and evaluation methods for latency testing in visionics device applications. Based upon available data, very different latency requirements are indicated based upon the piloting task, the role in which the visionics device is used in this task, and the characteristics of the visionics cockpit display device including its resolution, field-of-regard, and field-of-view. The least stringent latency requirements will involve Head-Up Display (HUD) applications, where the visionics imagery provides situational information as a supplement to symbology guidance and command information. Conversely, the visionics system latency requirement for a large field-of-view Head-Worn Display application, providing a Virtual-VMC capability from which the pilot will derive visual guidance, will be the most stringent, having a value as low as 20 msec.
Robust Subwavelength Single-Mode Perovskite Nanocuboid Laser.
Liu, Zhengzheng; Yang, Jie; Du, Juan; Hu, Zhiping; Shi, Tongchao; Zhang, Zeyu; Liu, Yanqi; Tang, Xiaosheng; Leng, Yuxin; Li, Ruxin
2018-05-14
On-chip photonic information processing systems require great research efforts toward miniaturization of the optical components. However, when approaching the classical diffraction limit, conventional dielectric lasers with all dimensions in nanoscale are difficult to realize due to the ultimate miniaturization limit of the cavity length and the extremely high requirement of optical gain to overcome the cavity loss. Herein, we have succeeded in reducing the laser size to subwavelength scale in three dimensions using an individual CsPbBr 3 perovskite nanocuboid. Even though the side length of the nanocuboid laser is only ∼400 nm, single-mode Fabry-Pérot lasing at room temperature with laser thresholds of 40.2 and 374 μJ/cm 2 for one- and two-photon excitation has been achieved, respectively, with the corresponding quality factors of 2075 and 1859. In addition, temperature-insensitive properties from 180 to 380 K have been demonstrated. The physical volume of a CsPbBr 3 nanocuboid laser is only ∼0.49λ 3 (where λ is the lasing wavelength in air). Its three-dimensional subwavelength size, excellent stable lasing performance at room temperature, frequency up-conversion ability, and temperature-insensitive properties may lead to a miniaturized platform for nanolasers and integrated on-chip photonic devices in nanoscale.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-25
... believes that, because SPX, SPXPM, and SPY options are ultimately derivative of the same benchmark--the S&P..., investors utilize SPX, SPXPM, and SPY options and their respective underlying instruments and futures to... Exchange proposes to eliminate position limits for options on the SPDR[supreg] S&P 500[supreg] exchange...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-25
... believes that, because SPX, SPXPM, and SPY options are ultimately derivative of the same benchmark--the S&P..., investors utilize SPX, SPXPM, and SPY options and their respective underlying instruments and futures to... of the Proposed Rule Change NASDAQ proposes to eliminate position limits for options on the SPDR...
As trees age and increase in size, the resistance along the water transport path has been hypothesized to increase and potentially limit the ultimate size a tree can reach. Past research has demonstrated that branches are a source of significant resistance in the transport path....
USDA-ARS?s Scientific Manuscript database
MAP3Ka encodes a key conserved protein kinase responsible for orchestrating a rapid cascade of cellular events ultimately leading to localized cell death. Hypersensitive response, as it is termed, enables genetically-resistant plants to limit microbial invasion under the right environmental conditio...
Characteristics of a Model K-12 Population Education Program.
ERIC Educational Resources Information Center
Stegner, Robert W.
The population Curriculum Study of the University of Delaware proposes a school program to develop a comprehensive knowledge and understanding of man in his environment. The central theme of the Population Curriculum Study is: MAN IS PART OF A NATURAL SYSTEM, AND IS ULTIMATELY SUBJECT TO THE LIMITS OF THE SYSTEM. We are thinking of population…
1986-10-01
Kaskaskia to the southwest, the Embarras to the south and the Vermilion to the southeast. Surface flow from the Base is ultimately conveyed to the Wabash ...of this characterization showed that arsenic, cadmium , chromium, lead, mercury, selenium, and silver were all below detection limits. The only EP TOX
Power, ethics, and corporate dentistry.
Parker, M Alec; Parker, M Alec
2013-01-01
The North Carolina Dental Association recently sought to place clear statutory limits on the influence of corporate, nondental interests over dentists practices' decision-making. This report describes the two-year legislative battle with well-funded and politically connected parties that ultimately resulted in laws that protect patients' rights to be treated by a dentist free of outside commercial interests.
ERIC Educational Resources Information Center
Petit, Angela
2001-01-01
Analyzes the experiences of several women who were identified as the debate's domestic, virtuous women: nurturing caretakers who entered public space to speak out as conservators of home and family. Highlights the limitations of an identity that enables women to access political spheres traditionally closed to them but ultimately dismisses theses…
ERIC Educational Resources Information Center
Grassl, Rebecca
2010-01-01
Mathematics competency continues to limit the success of many students and prevents their completion of a postsecondary degree, which ultimately prevents access to education, jobs, and upward social mobility. Furthermore, many postsecondary institutions admit students who do not meet the institution's mathematics proficiency requirements and then…
ERIC Educational Resources Information Center
Stewart, Francine A.
2016-01-01
The purpose of this study was to find out which corrective actions have a positive impact on improving students' learning and achievement and ultimately moving underperforming elementary schools out of Program Improvement (PI) status in California. Some common corrective actions include, but are not limited to, instructional program, instructional…
Chan, Markus; Park, John J; Shi, Ting; Martinón-Torres, Federico; Bont, Louis; Nair, Harish
2017-12-01
Acute lower respiratory tract infections (ALRIs) caused by respiratory syncytial virus (RSV) are a leading cause of hospitalization in infants. Numerous risk factors have been identified in the aetiology of severe RSV-associated ALRI necessitating hospitalisation, including prematurity and congenital heart disease. Down syndrome (DS), a common genetic disorder associated with congenital and dysmorphic features, has recently been identified as an independent risk factor for RSV-associated ALRI requiring hospitalisation; however, the disease burden of RSV-associated ALRI in this population has not yet been established. Similarly, the impact of DS as an independent risk factor has not yet been quantified. We aimed therefore to estimate the incidence of admissions in children with DS, and by comparing this with unaffected children, to quantify the risk of DS independent of other risk factors. A systematic review of the existing literature published between 1995 and March 1, 2017 was performed to quantify the incidence of hospitalisation due to RSV-associated ALRI in children with DS. Meta-analyses were performed on extracted data using STATA statistical software, and hospitalisation rates for children with and without DS under the age of 2 were calculated. 5 articles were ultimately deemed eligible for analyses. Analyses were limited to children under the age of 2 years. We calculated the hospitalisation rate for children with DS in this age group to be 117.6 per 1000 child-years (95% CI 67.4-205.2), vs a rate of 15.2 per 1000 child-years (95% CI 8.3-27.6) in unaffected children. This indicates DS contributes to a 6.8 (95% CI 5.5-8.4) fold increase in the relative risk of hospitalisation for RSV-associated ALRI. Though limited by a small number of articles, this review found sufficient evidence to conclude DS was a significant independent risk factor for the development of severe RSV-associated ALRI requiring hospitalisation. Further studies are needed to define the impact of DS in conjunction with other comorbidities on the risk of severe RSV infection. Determining benefits of immunoprophylaxis or future vaccines against RSV in this at-risk population is warranted.
2014-01-01
Background Improper workstation, work procedures and tools are found to be the risk factors for the development of musculoskeletal disorders among the informal sector workers of the developing countries. Low cost ergonomic interventions can effectively improve such adverse conditions. Case presentation In the present article some studies related to design interventions in different informal and agricultural sectors were discussed and their efficacies were analyzed. It was observed that with the help of appropriate interventions musculoskeletal disorders were reduced, adverse physiological conditions were improved when awkward postures were corrected and ultimately the organisational productivity was increased. Conclusion Proper implementation of ergonomic interventions can ultimately improve the economy of the nation. PMID:25009740
Ling, J; Payne, S; Connaire, K; McCarron, M
2016-01-01
Respite in children's palliative care aims to provide a break for family's from the routine of caring. Parental decision-making regarding the utilisation of out-of-home respite is dependent on many interlinking factors including the child's age, diagnosis, geographical location and the family's capacity to meet their child's care needs. A proposed model for out-of-home respite has been developed based on the findings of qualitative case study research. Utilising multiple, longitudinal, qualitative case study design, the respite needs and experiences of parents caring for a child with a life-limiting condition were explored. Multiple, in-depth interviews were undertaken with the parents identified by a hospital-based children's palliative care team. Data were analysed using thematic analysis. Each individual case consists of a whole study. Cross-case comparison was also conducted. Nine families were recruited and followed for two years. A total of 19 in-depth interviews were conducted with mothers and fathers (one or both) caring for a child with a life-limiting condition in Ireland. Each family reported vastly different needs and experiences of respite from their own unique perspective. Cross-case comparison showed that for all parents utilising respite care, regardless of their child's age and condition, home was the location of choice. Many interlinking factors influencing these decisions included: past experience of in-patient care, and trust and confidence in care providers. Issues were raised regarding the impact of care provision in the home on family life, siblings and the concept of home. Respite is an essential element of children's palliative care. Utilisation of out-of-home respite is heavily dependent on a number of interlinked and intertwined factors. The proposed model of care offers an opportunity to identify how these decisions are made and may ultimately assist in identifying the elements of responsive and family-focused respite that are important to families of children with life-limiting conditions. © 2015 John Wiley & Sons Ltd.
Employee and customer satisfaction in healthcare.
Jackson, Todd; Wood, Ben D
2010-01-01
There were multiple factors identified in a literature review that have a relationship to customer satisfaction, customer loyalty, employee satisfaction, and links between employee and customer satisfaction. Some of the factors identified were communication, wait times, perceived value, trust, dissatisfaction with management, changes in the workplace, vision,and fun at work. Managers must identify these topics to ensure customer satisfaction, customer loyalty,and employee satisfaction which will ultimately have a positive impact on their organizations.
Steinman, Gary
2013-07-01
The amounts of at least three biochemical factors are more often abnormal in autistic people than neurologically normal ones. They include insulin-like growth factor, anti-myelin basic protein, and serotonin. This may explain why processes initiated in utero which hinder normal neurogenesis, especially myelination, continue after delivery. Quantitation of these parameters may make possible the calculation of an autism index, anticipating at birth which children will ultimately develop overt autism. Copyright © 2013 Elsevier Ltd. All rights reserved.
[The healthy life-style as one of components of human safety].
Vasendin, V N; Tchebotarkova, S A; Kobalyeva, D A
2012-01-01
The technique of single-step anonymous questionnaire was applied to sampling of students of technical university to study propagation of health risk factors. The very high propagation of behavioral factors of life-style among students is noted. The model of healthy life-style is considered with emphasis on internal and external aspects of its functioning. It is established that particular steps in implementation of this model are ultimately individual.
1991-07-31
harvesting and road building in two national forests. The case study sites were the Siuslaw National Forest near Corvallis, Oregon, and the Porcupine ...million would accrue to recreational and commercial anglers from the clearcutting alternative. For the Porcupine - Hyalite Wilderness Study Area in Montana...impact environmental factors (e.g., available habitat, hunting area, or size of elk herds ), and ultimately those quality factors of the recreation
Jensen, Mark P.; Adachi, Tomonori; Tomé-Pires, Catarina; Lee, Jikwan; Osman, Zubaidah Jamil; Miró, Jordi
2014-01-01
Evidence supports the efficacy of hypnotic treatments, but there remain many unresolved questions regarding how hypnosis produces its beneficial effects. Most theoretical models focus more or less on biological, psychological, and social factors. This scoping review summarizes the empirical findings regarding the associations between specific factors in each of these domains and response to hypnosis. The findings indicate that: (1) no single factor appears primary; (2) different factors may contribute more or less to outcomes in different subsets of individuals or for different conditions; and (3) comprehensive models of hypnosis that incorporate factors from all 3 domains may ultimately prove to be more useful than more restrictive models that focus on 1 or a very few factors. PMID:25365127
Strodl, Markus A; Schausberger, Peter
2013-01-01
In many group-living animals, within-group associations are determined by familiarity, i.e. familiar individuals, independent of genetic relatedness, preferentially associate with each other. The ultimate causes of this behaviour are poorly understood and rigorous documentation of its adaptive significance is scarce. Limited attention theory states that focusing on a given task has interrelated cognitive, behavioural and physiological costs with respect to the attention paid to other tasks. In multiple signal environments attention has thus to be shared among signals. Assuming that familiar neighbours require less attention than unfamiliar ones, associating with familiar individuals should increase the efficiency in other tasks and ultimately increase fitness. We tested this prediction in adult females of the group-living, plant-inhabiting predatory mite Phytoseiulus persimilis. We evaluated the influence of social familiarity on within-group association behaviour, activity, predation and reproduction. In mixed groups (familiar and unfamiliar), familiar predator females preferentially associated with each other. In pure groups (either familiar or unfamiliar), familiar predator females produced more eggs than unfamiliar females at similar predation rates. Higher egg production was correlated with lower activity levels, indicating decreased restlessness. In light of limited attention theory, we argue that the ability to discriminate between familiar and unfamiliar individuals and preferential association with familiar individuals confers a selective advantage because familiar social environments are cognitively and physiologically less taxing than unfamiliar social environments. PMID:24273345
Data Gap Analysis and Database Expansion of Parameters for Munitions Constitutents
2005-12-01
BIOWIN documentation (Boethling et al. 1994). Sediment is briefly considered to be anaerobic soil, with overall conversion factors, and water is aerobic...degradation of a chemical in water, soil, and sediment is determined using the ultimate biodegradation expert survey module of the BIOWIN estimation
Perceptions of Professional Counselors: Survey of College Student Views
ERIC Educational Resources Information Center
Wantz, Richard A.; Firmin, Michael
2011-01-01
Numerous sources of information influence how individuals perceive professional counselors. The stressors associated with entering college, developmental differences, and factors associated with service fees may further impact how college students view mental health professionals and may ultimately influence when, for what issues, and with whom…
Effects of pterostilbene and resveratrol on brain and behavior
USDA-ARS?s Scientific Manuscript database
Age is the greatest universal risk factor for neurodegenerative diseases. During aging, these conditions progress from minor loss of function to major disruptions in daily life, loss of independence and ultimately death. Because approximately 25% of the world population is expected to be older than ...
32 CFR 231.5 - Procedures-domestic banks.
Code of Federal Regulations, 2010 CFR
2010-07-01
... to the TGA. (vi) A list of organizational and nonappropriated fund accounts, the name and location of... surveillance equipment, when necessary. (ix) Reasons for use of space controlled by the General Services... solicitation. Proposals shall be evaluated and ultimate selection made based upon the factors and weights...
Issues of nanoelectronics: a possible roadmap.
Wang, Kang L
2002-01-01
In this review, we will discuss a possible roadmap in scaling a nanoelectronic device from today's CMOS technology to the ultimate limit when the device fails. In other words, at the limit, CMOS will have a severe short channel effect, significant power dissipation in its quiescent (standby) state, and problems related to other essential characteristics. Efforts to use structures such as the double gate, vertical surround gate, and SOI to improve the gate control have continually been made. Other types of structures using SiGe source/drain, asymmetric Schottky source/drain, and the like will be investigated as viable structures to achieve ultimate CMOS. In reaching its scaling limit, tunneling will be an issue for CMOS. The tunneling current through the gate oxide and between the source and drain will limit the device operation. When tunneling becomes significant, circuits may incorporate tunneling devices with CMOS to further increase the functionality per device count. We will discuss both the top-down and bottom-up approaches in attaining the nanometer scale and eventually the atomic scale. Self-assembly is used as a bottom-up approach. The state of the art is reviewed, and the challenges of the multiple-step processing in using the self-assembly approach are outlined. Another facet of the scaling trend is to decrease the number of electrons in devices, ultimately leading to single electrons. If the size of a single-electron device is scaled in such a way that the Coulomb self-energy is higher than the thermal energy (at room temperature), a single-electron device will be able to operate at room temperature. In principle, the speed of the device will be fast as long as the capacitance of the load is also scaled accordingly. The single-electron device will have a small drive current, and thus the load capacitance, including those of interconnects and fanouts, must be small to achieve a reasonable speed. However, because the increase in the density (and/or functionality) of integrated circuits is the principal driver, the wiring or interconnects will increase and become the bottleneck for the design of future high-density and high-functionality circuits, particularly for single-electron devices. Furthermore, the massive interconnects needed in the architecture used today will result in an increase in load capacitance. Thus for single-electron device circuits, it is critical to have minimal interconnect loads. And new types of architectures with minimal numbers of global interconnects will be needed. Cellular automata, which need only nearest-neighbor interconnects, are discussed as a plausible example. Other architectures such as neural networks are also possible. Examples of signal processing using cellular automata are discussed. Quantum computing and information processing are based on quantum mechanical descriptions of individual particles correlated among each other. A quantum bit or qubit is described as a linear superposition of the wave functions of a two-state system, for example, the spin of a particle. With the interaction of two qubits, they are connected in a "wireless fashion" using wave functions via quantum mechanical interaction, referred to as entanglement. The interconnection by the nonlocality of wave functions affords a massive parallel nature for computing or so-called quantum parallelism. We will describe the potential and solid-state implementations of quantum computing and information, using electron spin and/or nuclear spin in Si and Ge. Group IV elements have a long coherent time and other advantages. The example of using SiGe for g factor engineering will be described.
Mechanical Computing Redux: Limitations at the Nanoscale
NASA Astrophysics Data System (ADS)
Liu, Tsu-Jae King
2014-03-01
Technology solutions for overcoming the energy efficiency limits of nanoscale complementary metal oxide semiconductor (CMOS) technology ultimately will be needed in order to address the growing issue of integrated-circuit chip power density. Off-state leakage current sets a fundamental lower limit in energy per operation for any voltage-level-based digital logic implemented with transistors (CMOS and beyond), which leads to practical limits for device density (i.e. cost) and operating frequency (i.e. system performance). Mechanical switches have zero off-state leakag and hence can overcome this fundamental limit. Contact adhesive force sets a lower limit for the switching energy of a mechanical switch, however, and also directly impacts its performance. This paper will review recent progress toward the development of nano-electro-mechanical relay technology and discuss remaining challenges for realizing the promise of mechanical computing for ultra-low-power computing. Supported by the Center for Energy Efficient Electronics Science (NSF Award 0939514).
Rapid population growth and environmental degradation: ultimate versus proximate factors.
Shaw, R P
1989-01-01
This philosophical review of 2 arguments about responsibility for and solutions to environmental degradation concludes that both sides are correct: the ultimate and the proximal causes. Ultimate causes of pollution are defined as the technology responsible for a given type of pollution, such as burning fossil fuel; proximate causes are defined as situation-specific factors confounding the problem, such as population density or rate of growth. Commoner and others argue that developed countries with low or negative population growth rates are responsible for 80% of world pollution, primarily in polluting technologies such as automobiles, power generation, plastics, pesticides, toxic wastes, garbage, warfaring, and nuclear weapons wastes. Distortionary policies also contribute; examples are agricultural trade protection, land mismanagement, urban bias in expenditures, and institutional rigidity., Poor nations are responsible for very little pollution because poverty allows little waste or expenditures for polluting, synthetic technologies. The proximal causes of pollution include numbers and rate of growth of populations responsible for the pollution. Since change in the ultimate cause of pollution remains out of reach, altering the numbers of polluters can make a difference. Predictions are made for proportions of the world's total waste production, assuming current 1.6 tons/capita for developed countries and 0.17 tons/capita for developing countries. If developing countries grow at current rates and become more wealthy, they will be emitting half the world's waste by 2025. ON the other hand, unsustainable population growth goes along with inadequate investment in human capital: education, health, employment, infrastructure. The solution is to improve farming technologies in the 117 non-self-sufficient countries, fund development in the most unsustainable enclaves of growing countries, break institutionalized socio-political rigidity in these enclaves, and focus on educating and empowering women in these enclaves. Women are in charge of birth spacing and all aspects of management of energy, food, water and the local environment, more so than men, in most countries.
NASA Astrophysics Data System (ADS)
Talamonti, James J.; Kay, Richard B.; Krebs, Danny J.
1996-05-01
A numerical model was developed to emulate the capabilities of systems performing noncontact absolute distance measurements. The model incorporates known methods to minimize signal processing and digital sampling errors and evaluates the accuracy limitations imposed by spectral peak isolation by using Hanning, Blackman, and Gaussian windows in the fast Fourier transform technique. We applied this model to the specific case of measuring the relative lengths of a compound Michelson interferometer. By processing computer-simulated data through our model, we project the ultimate precision for ideal data, and data containing AM-FM noise. The precision is shown to be limited by nonlinearities in the laser scan. absolute distance, interferometer.
Repetitively Q-switched Nd:BeL lasers
NASA Technical Reports Server (NTRS)
Degnan, J.; Birnbaum, M.; Deshazer, L. G.
1979-01-01
The thermal and mechanical characteristics which will ultimately limit the performance of Nd:BeL at high average power levels were investigated. The output beam characteristics (pulse width, peak power, beam dimensions and collimation) were determined at high repetition rates for both Nd:BeL and Nd:YAG. The output of Nd:BeL was shown to exceed that of Nd:YAG by a factor of 2.7 at low Q-switched repetition rates (1 Hz). This result follows from the smaller stimulated emission cross section of x-axis Nb:BeL compared to that of NdYAG by the same factor. At high repetition rates (10 Hz) the output of Nd:Bel falls to a level of three-fifths of its low repetition rate value while under similar tests the output of Nd:YAG remains essentially constant. A comparison of the measured values of the elasto-optic coefficients, the dn/dT values and the linear expansion coefficients for BeL and YAG failed to provide an explanation for the performance of BeL; however, thermal lensing was observed in Nd:BeL. Results imply that the output of a high repetition rate Q-switched Nd:BeL laser (high thermal loading) could be dramatically increased by utilization of a resonator design to compensate for the thermal lensing effects.
Manoochehri, Mahboobeh; Asgharinezhad, Ali Akbar; Shekari, Nafiseh
2015-01-01
This work describes a novel Fe₃O₄@SiO₂@polyaminoquinoline magnetic nanocomposite and its application in the pre-concentration of Cd(II) and Pb(II) ions. The parameters affecting the pre-concentration procedure were optimised by a Box-Behnken design through response surface methodology. Three variables (extraction time, magnetic sorbent amount and pH) were selected as the main factors affecting the sorption step, while four variables (type, volume and concentration of the eluent, and elution time) were selected as main factors in the optimisation study of the elution step. Following the sorption and elution of analytes, the ions were quantified by flame atomic absorption spectrometry (FASS). The limits of detection were 0.1 and 0.7 ng ml(-1) for Cd(II) and Pb(II) ions, respectively. All the relative standard deviations were less than 7.6%. The sorption capacities of this new sorbent were 57 mg g(-)(1) for Cd(II) and 73 mg g(-1) for Pb(II). Ultimately, this nanocomposite was successfully applied to the rapid extraction of trace quantities of these heavy metal ions from seafood and agricultural samples and satisfactory results were obtained.
Addiction and the brain antireward system.
Koob, George F; Le Moal, Michel
2008-01-01
A neurobiological model of the brain emotional systems has been proposed to explain the persistent changes in motivation that are associated with vulnerability to relapse in addiction, and this model may generalize to other psychopathology associated with dysregulated motivational systems. In this framework, addiction is conceptualized as a cycle of decreased function of brain reward systems and recruitment of antireward systems that progressively worsen, resulting in the compulsive use of drugs. Counteradaptive processes, such as opponent process, that are part of the normal homeostatic limitation of reward function fail to return within the normal homeostatic range and are hypothesized to repeatedly drive the allostatic state. Excessive drug taking thus results in not only the short-term amelioration of the reward deficit but also suppression of the antireward system. However, in the long term, there is worsening of the underlying neurochemical dysregulations that ultimately form an allostatic state (decreased dopamine and opioid peptide function, increased corticotropin-releasing factor activity). This allostatic state is hypothesized to be reflected in a chronic deviation of reward set point that is fueled not only by dysregulation of reward circuits per se but also by recruitment of brain and hormonal stress responses. Vulnerability to addiction may involve genetic comorbidity and developmental factors at the molecular, cellular, or neurocircuitry levels that sensitize the brain antireward systems.
Feiz, Leila; Williams-Carrier, Rosalind; Wostrikoff, Katia; Belcher, Susan; Barkan, Alice; Stern, David B
2012-08-01
Most life is ultimately sustained by photosynthesis and its rate-limiting carbon fixing enzyme, ribulose-1,5-bis-phosphate carboxylase/oxygenase (Rubisco). Although the structurally comparable cyanobacterial Rubisco is amenable to in vitro assembly, the higher plant enzyme has been refractory to such manipulation due to poor understanding of its assembly pathway. Here, we report the identification of a chloroplast protein required for Rubisco accumulation in maize (Zea mays), RUBISCO ACCUMULATION FACTOR1 (RAF1), which lacks any characterized functional domains. Maize lines lacking RAF1 due to Mutator transposon insertions are Rubisco deficient and seedling lethal. Analysis of transcripts and proteins showed that Rubisco large subunit synthesis in raf1 plants is not compromised; however, newly synthesized Rubisco large subunit appears in a high molecular weight form whose accumulation requires a specific chaperonin 60 isoform. Gel filtration analysis and blue native gels showed that endogenous and recombinant RAF1 are trimeric; however, following in vivo cross-linking, RAF1 copurifies with Rubisco large subunit, suggesting that they interact weakly or transiently. RAF1 is predominantly expressed in bundle sheath chloroplasts, consistent with a Rubisco accumulation function. Our results support the hypothesis that RAF1 acts during Rubisco assembly by releasing and/or sequestering the large subunit from chaperonins early in the assembly process.
Impact of hypocaloric dietary intervention on ovulation in obese women with PCOS.
Jarrett, Brittany Y; Lujan, Marla E
2016-10-31
Polycystic ovary syndrome (PCOS) is a common cause of ovulatory dysfunction impacting women of reproductive age. Obesity and insulin resistance are thought to potentiate disruptions in antral follicle development that result in chronic anovulation, and as such, have become important therapeutic targets of dietary interventions aimed at weight loss. Caloric restriction has been shown to promote sporadic ovulation in obese women with PCOS, but improvements have occurred across a wide range of patients and little has been garnered about the factors that distinguish responders from non-responders. Further, few studies have evaluated the likelihood for modest weight loss to restore normal ovulatory cyclicity in PCOS. Consensus regarding the impact of dietary intervention on ovulation has been limited by variability in the measures used to characterize and report ovulatory status across studies. In response, this review provides an assessment of the evidence surrounding the effectiveness of hypocaloric dietary intervention to normalize ovulatory function in PCOS. The impact of physiological versus methodological factors on the evaluation of ovulatory status is discussed and recommendations to strengthen future studies in this area are provided. Ultimately, further research is needed to understand the optimal dietary or lifestyle approaches that promote ovulation and sustained improvements in reproductive function in PCOS.
The NOTCH Ligand JAG1 Regulates GDNF Expression in Sertoli Cells
Garcia, Thomas X.; Parekh, Parag; Gandhi, Pooja; Sinha, Krishna
2017-01-01
In the seminiferous epithelium of the testis, Sertoli cells are key niche cells directing proliferation and differentiation of spermatogonial stem cells (SSCs) into spermatozoa. Sertoli cells produce glial cell line-derived neurotrophic factor (GDNF), which is essential for SSC self-renewal and progenitor expansion. While the role of GDNF in the testis stem cell niche is established, little is known about how this factor is regulated. Our previous studies on NOTCH activity in Sertoli cells demonstrated a role of this pathway in limiting stem/progenitor cell numbers, thus ultimately downregulating sperm cell output. In this study we demonstrate through a double-mutant mouse model that NOTCH signaling in Sertoli cells functions solely through the canonical pathway. Further, we demonstrate through Dual luciferase assay and chromatin immunoprecipitation quantitative polymerase chain reaction (ChIP-qPCR) analysis that the NOTCH targets HES1 and HEY1, which are transcriptional repressors, directly downregulate GDNF expression by binding to the Gdnf promoter, thus antagonizing the effects of FSH/cAMP. Finally, we demonstrate that testicular stem/progenitors cells are activating NOTCH signaling in Sertoli cells in vivo and in vitro through the NOTCH ligand JAG1 at their surface, indicating that these cells may ensure their own homeostasis through negative feedback regulation. PMID:28051360
Impact of hypocaloric dietary intervention on ovulation in obese women with PCOS
Jarrett, Brittany Y.; Lujan, Marla E.
2016-01-01
Polycystic ovary syndrome (PCOS) is a common cause of ovulatory dysfunction impacting women of reproductive age. Obesity and insulin resistance are thought to potentiate disruptions in antral follicle development that result in chronic anovulation, and as such, have become important therapeutic targets of dietary interventions aimed at weight loss. Caloric restriction has been shown to promote sporadic ovulation in obese women with PCOS, but improvements have occurred across a wide range of patients and little has been garnered about the factors that distinguish responders from non-responders. Further, few studies have evaluated the likelihood for modest weight loss to restore normal ovulatory cyclicity in PCOS. Consensus regarding the impact of dietary intervention on ovulation has been limited by variability in the measures used to characterize and report ovulatory status across studies. In response, this review provides an assessment of the evidence surrounding the effectiveness of hypocaloric dietary intervention to normalize ovulatory function in PCOS. The impact of physiological versus methodological factors on the evaluation of ovulatory status is discussed and recommendations to strengthen future studies in this area are provided. Ultimately, further research is needed to understand the optimal dietary or lifestyle approaches that promote ovulation and sustained improvements in reproductive function in PCOS. PMID:27799625
Challenges in using rater judgements in medical education.
Albanese, M A
2000-08-01
Changes in the healthcare environment are putting increasing pressure on medical schools to make faculty accountable and to document the quality of the medical education they provide. Faculty's ratings of students' performances and students' ratings of faculty's teaching are important elements in these efforts to document educational quality. This article discusses selected research related to factors affecting raters' judgements, analyses how changes in the health care environment are influencing such judgements, offers some suggestions to moderate some of the effects and links these influences to the system that upholds professional standards. Ratings are known to have a positive bias (generosity error), provide limited discrimination and often fail to document serious deficits. The potential sources of these problems relate to the mechanics of the rating task, the system used to obtain ratings and factors affecting rater judgement. As managed care demands reduce the time faculty have for teaching, as system-wide disincentives to provide negative ratings proliferate and as social engineering challenges, such as the Americans with Disabilities Act, impose differential standards for students, the natural tendency to avoid giving negative ratings becomes even harder to resist. Ultimately, these forces compromise the capability of faculty to uphold the standards of the profession. The author calls for a national effort to stem the erosion of those standards.
Negative capacitance in a ferroelectric-dielectric heterostructure for ultra low-power computing
NASA Astrophysics Data System (ADS)
Salahuddin, Sayeef
2012-10-01
Introduction: It is now well recognized that energy dissipation in microchips may ultimately restrict device scaling - the downsizing of physical dimensions that has fuelled the fantastic growth of microchip industry so far. However, energy dissipation in electronic devices has even bigger consequences. Use of electronic equipments in our daily life is increasing exponentially. As a result, energy dissipation in electronic devices is expected to play an increasingly significant role in terms of national energy needs [1-6]. But there is a fundamental limit to how much the dissipation can be reduced in transistors that is in the heart of almost all electronic devices. Conventional transistors are thermally activated. A barrier is created that blocks the current and then the barrier height is modulated to control the current flow. This modulation of the barrier changes the number of electrons exponentially following the Boltzmann factor exp(qV/kT). This in turn means that to change the current by one order of magnitude at least a voltage of 2.3kT/q (that translates into 60 mV at room temperature) is necessary. In practice, a voltage many times this limit of 60 mV has to be applied to obtain a good ON current to OFF current ratio. Because this comes from the Boltzmann factor that is a fundamental nature of how electrons are distributed in energy, it is not possible to reduce the supply voltage in conventional transistors below a certain point, while still maintaining a healthy ON/OFF ratio that is necessary for robust operation. On the other hand, continuous down scaling is putting even larger number of devices in the same area thus increasing the energy dissipation density beyond controllable and sustainable limits. This has been termed as the Boltzmann's Tyranny [2] and it has been predicted that unless new principles are found based on fundamentally new physics, the transistors will die a thermal death [4].
Data Gap Analysis and Database Expansion of Parameters for Munitions Constituents
2005-12-01
the BIOWIN documentation (Boethling et al. 1994). Sediment is briefly considered to be anaerobic soil, with overall conversion factors, and water is...life for degradation of a chemical in water, soil, and sediment is determined using the ultimate biodegradation expert survey module of the BIOWIN
46 CFR 72.05-20 - Stairways, ladders, and elevators.
Code of Federal Regulations, 2010 CFR
2010-10-01
... factor of safety of 4 based on the ultimate strength. (j) The stringers, treads, and all platforms and... means of an intermediate landing of rectangular or nearly rectangular shape based on the actual...) Except as further noted the provisions of this section apply to all vessels. (2) For small vessels...
46 CFR 72.05-20 - Stairways, ladders, and elevators.
Code of Federal Regulations, 2011 CFR
2011-10-01
... factor of safety of 4 based on the ultimate strength. (j) The stringers, treads, and all platforms and... means of an intermediate landing of rectangular or nearly rectangular shape based on the actual...) Except as further noted the provisions of this section apply to all vessels. (2) For small vessels...
The Negative Testing Effect and Multifactor Account
ERIC Educational Resources Information Center
Peterson, Daniel J.; Mulligan, Neil W.
2013-01-01
Across 3 experiments, we investigated the factors that dictate when taking a test improves subsequent memory performance (the "testing effect"). In Experiment 1, participants retrieving a set of targets during a retrieval practice phase ultimately recalled fewer of those targets compared with a group of participants who studied the…
Developing Healthy Companies through Human Resources Management. WBGH Worksite Wellness Series.
ERIC Educational Resources Information Center
Rosen, Robert; Freedman, Carol
Four areas--health benefits, occupational safety and health, prevention and wellness, and human resource development--have contributed significantly to enhancing worker health. The "healthy corporation" is both a goal and a comprehensive attitude about organizational life and about the factors the affect organizational health and, ultimately,…
Recent field and experimental research has shown that certain classes of subsurface contaminants can biodegrade at many sites. A number of site specific factors influences the rate of biodegradation, which helps determine the ultimate extent of contamination at these sites. The...
Teacher Competencies through the Prism of Educational Research
ERIC Educational Resources Information Center
Peklaj, Cirila
2015-01-01
The present article focuses on teacher competencies as a major factor that impacts student learning. Ultimately, all attempts to improve education converge in the teacher and the quality of his/her work with students. With their teaching methods, their communication and their classroom management, teachers can structure the kind of learning…
ERIC Educational Resources Information Center
Peterson, Christina Hamme
2012-01-01
Counseling work is increasingly conducted in team format. The methods counseling teams use to manage the emotional component of their group life, or their group emotional intelligence, have been proposed as significantly contributing to group member trust, cooperation, and ultimate performance. Item development, exploratory factor analysis, and…
CoSMoS Unravels Mysteries of Transcription Initiation
Gourse, Richard L.; Landick, Robert
2013-01-01
Using a fluorescence method called colocalization single-molecule spectroscopy (CoSMoS), Friedman and Gelles dissect the kinetics of transcription initiation at a bacterial promoter. Ultimately, CoSMoS could greatly aid the study of the effects of DNA sequence and transcription factors on both prokaryotic and eukaryotic promoters. PMID:22341438
Investigation of the Factors That Influence Undergraduate Student Chemistry Course Selection
ERIC Educational Resources Information Center
Hinds, Elsa M.; Shultz, Ginger V.
2018-01-01
The introductory chemistry sequence is a common pathway for undergraduates pursuing science, technology, engineering, and math (STEM) and prehealth careers. Student's academic decision-making has far-reaching consequences for their trajectory, including persistence in the major and ultimate career choice. This phenomenon was studied using a survey…
ERIC Educational Resources Information Center
Wang, Xueli; Chuang, Yating; McCready, Bo
2017-01-01
Background/Context: As the cost of postsecondary education continues to rise, more students begin their postsecondary careers at a community college with the ultimate goal of upward transfer. However, there is limited evidence regarding how earning an associate degree prior to transfer shape transfer students' eventual success at baccalaureate…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-03
... options are ultimately derivative of the same benchmark--the S&P 500 Index--they should be treated equally...-Regulatory Organizations; BOX Options Exchange LLC; Notice of Filing of Proposed Rule Change To Eliminate Position Limits for Options on the SPDR[supreg] S&P 500[supreg] Exchange-Traded Fund,\\1\\ Which List and...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-18
...''). The Exchange believes that, because SPX, SPXPM, and SPY options are ultimately derivative of the same... NYSE Amex Options Rule 904 To Eliminate Position Limits for Options on the SPDR[supreg] S&P 500[supreg... Change The Exchange proposes to amend Commentary .07 to NYSE Amex Options Rule 904 to eliminate position...
Design of advanced beams considering elasto-plastic behaviour of material
NASA Astrophysics Data System (ADS)
Tolun, S.
1992-10-01
The paper proposes a computational procedure for precise calculation of limit and ultimate or design loads, which must be carried by an advanced aviation beam, without permanent distortion and without rupture. Among several stress-strain curve representations, one that is suitable for a particular material is chosen for applied loads, yield, and failure load calculations, and then nonlinear analysis is performed.
2009-03-01
infrared, thermal , or night vision applications. Understanding the true capabilities and limitations of the ALAN camera and its applicability to a...an option to more expensive infrared, thermal , or night vision applications. Ultimately, it will be clear whether the configuration of the Kestrel...45 A. THERMAL CAMERAS................................................................................45 1
A method of calculating the ultimate strength of continuous beams
NASA Technical Reports Server (NTRS)
Newlin, J A; Trayer, George W
1931-01-01
The purpose of this study was to investigate the strength of continuous beams after the elastic limit has been passed. As a result, a method of calculation, which is applicable to maximum load conditions, has been developed. The method is simpler than the methods now in use and it applies properly to conditions where the present methods fail to apply.
ERIC Educational Resources Information Center
Lamb, Richard L.; Firestone, Jonah B.
2017-01-01
Conflicting explanations and unrelated information in science classrooms increase cognitive load and decrease efficiency in learning. This reduced efficiency ultimately limits one's ability to solve reasoning problems in the science. In reasoning, it is the ability of students to sift through and identify critical pieces of information that is of…
ERIC Educational Resources Information Center
Goering, Christian Z.; Baker, Kimberly F.
2010-01-01
In this empirical study which used a mixed-method approach, researchers sought to understand how participation in dramatic oral reading interventions affects both reading fluency and comprehension. The study also investigated how that participation is ultimately limited or promoted by the social context of high schools. Qualitative data are…
Perceptual Filtering in L2 Lexical Memory: A Neural Network Approach to Second Language Acquisition
ERIC Educational Resources Information Center
Nelson, Robert
2012-01-01
A number of asymmetries in lexical memory emerge when monolinguals and early bilinguals are compared to (relatively) late second language (L2) learners. Their study promises to provide insight into the internal processes that both support and ultimately limit L2 learner achievement. Generally, theory building in L2 and bilingual lexical memory has…
ERIC Educational Resources Information Center
Parsegian, V. Lawrence
1974-01-01
The author elaborates on the thesis that much of the confusion and argument about the role of nuclear energy in meeting the energy needs of the nation and the world is caused by failure to place the known facts in perspective with respect to time, to hazards that accompany the use of energy in any form, to economics, and to ultimate limitations in…
McOmish, Caitlin E; Burrows, Emma L; Hannan, Anthony J
2014-10-01
Psychiatric disorders affect a substantial proportion of the population worldwide. This high prevalence, combined with the chronicity of the disorders and the major social and economic impacts, creates a significant burden. As a result, an important priority is the development of novel and effective interventional strategies for reducing incidence rates and improving outcomes. This review explores the progress that has been made to date in establishing valid animal models of psychiatric disorders, while beginning to unravel the complex factors that may be contributing to the limitations of current methodological approaches. We propose some approaches for optimizing the validity of animal models and developing effective interventions. We use schizophrenia and autism spectrum disorders as examples of disorders for which development of valid preclinical models, and fully effective therapeutics, have proven particularly challenging. However, the conclusions have relevance to various other psychiatric conditions, including depression, anxiety and bipolar disorders. We address the key aspects of construct, face and predictive validity in animal models, incorporating genetic and environmental factors. Our understanding of psychiatric disorders is accelerating exponentially, revealing extraordinary levels of genetic complexity, heterogeneity and pleiotropy. The environmental factors contributing to individual, and multiple, disorders also exhibit breathtaking complexity, requiring systematic analysis to experimentally explore the environmental mediators and modulators which constitute the 'envirome' of each psychiatric disorder. Ultimately, genetic and environmental factors need to be integrated via animal models incorporating the spatiotemporal complexity of gene-environment interactions and experience-dependent plasticity, thus better recapitulating the dynamic nature of brain development, function and dysfunction. © 2014 The British Pharmacological Society.
2010-04-01
MILITARY MEDICINE , 175,4:227, 2010 Demographic, Physical, and Mental Health Factors Associated With Deployment of U.S. Army Soldiers to the Persian...these soldiers who *SSDS, Inc., Natick, MA. tU.S. Army Research Institute for Environmental Medicine , Natick, MA. tDepartment of Psychiatry, Uniformed...article originally appeared in Military Medicine 2000; 165(10): 762-72. did ultimately deploy to the Persian Gulf. At a minimum, the potential
2010-04-01
MILITARY MEDICINE , 175,4:227, 2010 Demographic, Physical, and Mental Health Factors Associated With Deployment of U.S. Army Soldiers to the Persian...these soldiers who *SSDS, Inc., Natick, MA. tU.S. Army Research Institute for Environmental Medicine , Natick, MA. tDepartment of Psychiatry, Uniformed...article originally appeared in Military Medicine 2000; 165(10): 762-72. did ultimately deploy to the Persian Gulf. At a minimum, the potential
Human Factors in the 21st Century(Les facteurs humains au 21th siecle)
2002-05-01
abstract thinking so as to become a systems supervisor and ultimately, a systems manager. • Finally, we must not lose sight of the fact that the...information at the right level of abstraction may become the dominant theme. Human factors specialists with a strong background in cognition and deep...of the underlying system and then helping pilots acquire an accurate cognitive model of the system during training. Instruction about cockpit
Belli, Renan; Wendler, Michael; de Ligny, Dominique; Cicconi, Maria Rita; Petschelt, Anselm; Peterlik, Herwig; Lohbauer, Ulrich
2017-01-01
A deeper understanding of the mechanical behavior of dental restorative materials requires an insight into the materials elastic constants and microstructure. Here we aim to use complementary methodologies to thoroughly characterize chairside CAD/CAM materials and discuss the benefits and limitations of different analytical strategies. Eight commercial CAM/CAM materials, ranging from polycrystalline zirconia (e.max ZirCAD, Ivoclar-Vivadent), reinforced glasses (Vitablocs Mark II, VITA; Empress CAD, Ivoclar-Vivadent) and glass-ceramics (e.max CAD, Ivoclar-Vivadent; Suprinity, VITA; Celtra Duo, Dentsply) to hybrid materials (Enamic, VITA; Lava Ultimate, 3M ESPE) have been selected. Elastic constants were evaluated using three methods: Resonant Ultrasound Spectroscopy (RUS), Resonant Beam Technique (RBT) and Ultrasonic Pulse-Echo (PE). The microstructures were characterized using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), Raman Spectroscopy and X-ray Diffraction (XRD). Young's modulus (E), Shear modulus (G), Bulk modulus (B) and Poisson's ratio (ν) were obtained for each material. E and ν reached values ranging from 10.9 (Lava Ultimate) to 201.4 (e.max ZirCAD) and 0.173 (Empress CAD) to 0.47 (Lava Ultimate), respectively. RUS showed to be the most complex and reliable method, while the PE method the easiest to perform but most unreliable. All dynamic methods have shown limitations in measuring the elastic constants of materials showing high damping behavior (hybrid materials). SEM images, Raman spectra and XRD patterns were made available for each material, showing to be complementary tools in the characterization of their crystal phases. Here different methodologies are compared for the measurement of elastic constants and microstructural characterization of CAD/CAM restorative materials. The elastic properties and crystal phases of eight materials are herein fully characterized. Copyright © 2016 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
The Role of Moist Processes in the Intrinsic Predictability of Indian Ocean Cyclones
DOE Office of Scientific and Technical Information (OSTI.GOV)
Taraphdar, Sourav; Mukhopadhyay, P.; Leung, Lai-Yung R.
The role of moist processes and the possibility of error cascade from cloud scale processes affecting the intrinsic predictable time scale of a high resolution convection permitting model within the environment of tropical cyclones (TCs) over the Indian region are investigated. Consistent with past studies of extra-tropical cyclones, it is demonstrated that moist processes play a major role in forecast error growth which may ultimately limit the intrinsic predictability of the TCs. Small errors in the initial conditions may grow rapidly and cascades from smaller scales to the larger scales through strong diabatic heating and nonlinearities associated with moist convection.more » Results from a suite of twin perturbation experiments for four tropical cyclones suggest that the error growth is significantly higher in cloud permitting simulation at 3.3 km resolutions compared to simulations at 3.3 km and 10 km resolution with parameterized convection. Convective parameterizations with prescribed convective time scales typically longer than the model time step allows the effects of microphysical tendencies to average out so convection responds to a smoother dynamical forcing. Without convective parameterizations, the finer-scale instabilities resolved at 3.3 km resolution and stronger vertical motion that results from the cloud microphysical parameterizations removing super-saturation at each model time step can ultimately feed the error growth in convection permitting simulations. This implies that careful considerations and/or improvements in cloud parameterizations are needed if numerical predictions are to be improved through increased model resolution. Rapid upscale error growth from convective scales may ultimately limit the intrinsic mesoscale predictability of the TCs, which further supports the needs for probabilistic forecasts of these events, even at the mesoscales.« less
NASA Astrophysics Data System (ADS)
Ahmad, Mohd Hafis; Ismail, Syuhaida; Rani, Wan Nurul Mardiah Wan Mohd; Wahab, Mohammad Hussaini
2017-10-01
Organisational change occurs when an organisation makes a transition from its current state to some desired future state in minimising employee resistance and cost to the organisation while simultaneously maximising the effectiveness of the change effort. This paper, aims at appraising the change management of organisation in Malaysia since limited research has been done to examine readiness for change by the employees in the organisation. This paper is materialising its objectives of (1) investigating the current practice of organisation and employees in the organisation towards change management and (2) assessing the factors influencing readiness of organisation and employees in the organisation towards change management. It is found via literature review that change management is a structured approach for ensuring that changes are thoroughly and smoothly implemented to transitioning individuals, teams, and organisations to a desired future state by focusing on the wider impacts of change, particularly on people, where change does not happen in isolation and it impacts the whole organisation. Furthermore, it is found that current practice of organisation and employees in the organisation towards change management involved in three main factors, namely trust in management, communication and organisational commitment; with the factor for trust in management is the positive vision for the future by management team, meanwhile for communication, it is found that there is good communication between supervisors and employees about the organisation's policy toward the changes. The factor found in organisational commitment is employees enjoying discussing about their organisation with outsiders. The findings of this paper provide a positive impact on change management planning, which ultimately help in ensuring more effective change programme implementation in the organisation in Malaysia.
Plug nozzles: The ultimate customer driven propulsion system
NASA Technical Reports Server (NTRS)
Aukerman, Carl A.
1991-01-01
This paper presents the results of a study applying the plug cluster nozzle concept to the propulsion system for a typical lunar excursion vehicle. Primary attention for the design criteria is given to user defined factors such as reliability, low volume, and ease of propulsion system development. Total thrust and specific impulse are held constant in the study while other parameters are explored to minimize the design chamber pressure. A brief history of the plug nozzle concept is included to point out the advanced level of technology of the concept and the feasibility of exploiting the variables considered in this study. The plug cluster concept looks very promising as a candidate for consideration for the ultimate customer driven propulsion system.
NASA Technical Reports Server (NTRS)
Aukerman, Carl A.
1991-01-01
This paper presents the results of a study applying the plug cluster nozzle concept to the propulsion system for a typical lunar excursion vehicle. Primary attention for the design criteria is given to user defined factors such as reliability, low volume, and ease of propulsion system development. Total thrust and specific impulse are held constant in the study while other parameters are explored to minimize the design chamber pressure. A brief history of the plug nozzle concept is included to point out the advanced level of technology of the concept and the feasibility of exploiting the variables considered in the study. The plug cluster concept looks very promising as a candidate for consideration for the ultimate customer driven propulsion system.
NASA Astrophysics Data System (ADS)
Kleidon, Axel
2014-05-01
Food, water, and energy play, obviously, a central role in maintaining human activity. In this contribution, I derive estimates for the fundamental limits on the rates by which these resources are provided by Earth system processes and the levels at which these can be used sustainably. The key idea here is that these resources are, directly or indirectly, generated out of the energy associated with the absorption of sunlight, and that the energy conversions from sunlight to other forms ultimately limit the generation of these resources. In order to derive these conversion limits, we need to trace the links between the processes that generate food, water and energy to the absorption of sunlight. The resource "food" results from biomass production by photosynthesis, which requires light and a sufficient magnitude of gas exchange of carbon dioxide at the surface, which is maintained by atmospheric motion which in turn is generated out of differential radiative heating and cooling. The resource "water" is linked to hydrologic cycling, with its magnitude being linked to the latent heat flux of the surface energy balance and water vapor transport in the atmosphere which is also driven by differential radiative heating and cooling. The availability of (renewable) energy is directly related to the generation of different forms of energy of climate system processes, such as the kinetic energy of atmospheric motion, which, again, relates to radiative heating differences. I use thermodynamics and its limits as a basis to establish the planetary limits of these processes and use a simple model to derive first-order estimates. These estimates compare quite well with observations, suggesting that this thermodynamic view of the whole Earth system provides an objective, physical basis to define and quantify planetary boundaries as well as the factors that shape these boundaries.
Phan, N T; Cabot, P J; Wallwork, B D; Cervin, A U; Panizza, B J
2015-07-01
Chronic rhinosinusitis is characterised by persistent inflammation of the sinonasal mucosa. Multiple pathophysiological mechanisms are likely to exist. Previous research has focused predominantly on T-helper type cytokines to highlight the inflammatory mechanisms. However, proteins such as nuclear factor kappa B and transforming growth factor beta are increasingly recognised to have important roles in sinonasal inflammation and tissue remodelling. This review article explores the roles of T-helper type cytokines, nuclear factor kappa B and transforming growth factor beta in the pathophysiological mechanisms of chronic rhinosinusitis. An understanding of these mechanisms will allow for better identification and classification of chronic rhinosinusitis endotypes, and, ultimately, improved therapeutic strategies.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Moran, Kelly Renee; Del Valle, Sara Yermimah
Respiratory infectious disease epidemics and pandemics are recurring events that levy a high cost on individuals and society. The health-protective behavioral response of the public plays an important role in limiting respiratory infectious disease spread. Health-protective behaviors take several forms. Behaviors can be categorized as pharmaceutical (e.g., vaccination uptake, antiviral use) or non-pharmaceutical (e.g., hand washing, face mask use, avoidance of public transport). Due to the limitations of pharmaceutical interventions during respiratory epidemics and pandemics, public health campaigns aimed at limiting disease spread often emphasize both non-pharmaceutical and pharmaceutical behavioral interventions. Understanding the determinants of the public’s behavioral response ismore » crucial for devising public health campaigns, providing information to parametrize mathematical models, and ultimately limiting disease spread. While other reviews have qualitatively analyzed the body of work on demographic determinants of health-protective behavior, this meta-analysis quantitatively combines the results from 85 publications to determine the global relationship between gender and health-protective behavioral response. The results show that women in the general population are about 50% more likely than men to adopt/practice non-pharmaceutical behaviors. Conversely, men in the general population are marginally (about 12%) more likely than women to adopt/practice pharmaceutical behaviors. It is possible that factors other than pharmaceutical/non-pharmaceutical status not included in this analysis act as moderators of this relationship. We find these results suggest an inherent difference in how men and women respond to epidemic and pandemic respiratory infectious diseases. In conclusion, this information can be used to target specific groups when developing non-pharmaceutical public health campaigns and to parameterize epidemic models incorporating demographic information.« less
Moran, Kelly Renee; Del Valle, Sara Yermimah
2016-10-21
Respiratory infectious disease epidemics and pandemics are recurring events that levy a high cost on individuals and society. The health-protective behavioral response of the public plays an important role in limiting respiratory infectious disease spread. Health-protective behaviors take several forms. Behaviors can be categorized as pharmaceutical (e.g., vaccination uptake, antiviral use) or non-pharmaceutical (e.g., hand washing, face mask use, avoidance of public transport). Due to the limitations of pharmaceutical interventions during respiratory epidemics and pandemics, public health campaigns aimed at limiting disease spread often emphasize both non-pharmaceutical and pharmaceutical behavioral interventions. Understanding the determinants of the public’s behavioral response ismore » crucial for devising public health campaigns, providing information to parametrize mathematical models, and ultimately limiting disease spread. While other reviews have qualitatively analyzed the body of work on demographic determinants of health-protective behavior, this meta-analysis quantitatively combines the results from 85 publications to determine the global relationship between gender and health-protective behavioral response. The results show that women in the general population are about 50% more likely than men to adopt/practice non-pharmaceutical behaviors. Conversely, men in the general population are marginally (about 12%) more likely than women to adopt/practice pharmaceutical behaviors. It is possible that factors other than pharmaceutical/non-pharmaceutical status not included in this analysis act as moderators of this relationship. We find these results suggest an inherent difference in how men and women respond to epidemic and pandemic respiratory infectious diseases. In conclusion, this information can be used to target specific groups when developing non-pharmaceutical public health campaigns and to parameterize epidemic models incorporating demographic information.« less
Practice, clinical management, and financial arrangements of practicing generalists.
Keating, Nancy L; Landon, Bruce E; Ayanian, John Z; Borbas, Catherine; Guadagnoli, Edward
2004-05-01
To describe the practice settings, financial arrangements, and management strategies experienced by generalist physicians and identify factors associated with reporting pressure to limit referrals, pressure to see more patients, and career dissatisfaction. Cross-sectional mail survey. Six hundred nineteen generalist physicians (62% response rate) caring for managed care patients in 3 Minnesota health plans during 1999. Twenty-six percent of physicians reported pressure to limit referrals. In adjusted analyses, female physicians and those who were board certified acted as gatekeepers for most of their patients, received incentives based on performance reports and quality profiles, and received direct income from capitation, and were more likely than others to report this pressure (all P <.05). Sixty-two percent reported pressure to see more patients. In adjusted analyses, this pressure was more frequent among physicians in practices owned by health systems, those using physician extenders, and among physicians paid by salary with performance adjustment or those receiving at least some capitation (all P <.05). One-quarter (24%) of physicians were dissatisfied with their career in medicine. In adjusted analyses, physicians reporting pressure to limit referrals (risk ratio, 1.12; 95% confidence interval, 1.01 to 1.19) and those reporting pressure to see more patients (risk ratio, 1.37; 95% confidence interval, 1.08 to 1.66) were more likely to be dissatisfied than other physicians. Pressures to limit referrals and to see more patients are common, particularly among physicians paid based on productivity or capitation, and they are associated with career dissatisfaction. Whether future changes in practice arrangements or compensation strategies can decrease such physician-reported pressures, and ultimately improve physician satisfaction, will be an important area for future study.
Piper, Frida I.; Fajardo, Alex
2011-01-01
Background and Aims Trees universally decrease their growth with age. Most explanations for this trend so far support the hypothesis that carbon (C) gain becomes limited with age; though very few studies have directly assessed the relative reductions of C gain and C demand with tree age. It has also been suggested that drought enhances the effect of C gain limitation in trees. Here tests were carried out to determine whether C gain limitation is causing the growth decay with tree age, and whether drought accentuates its effect. Methods The balance between C gain and C demand across tree age and height ranges was estimated. For this, the concentration of non-structural carbohydrates (NSCs) in stems and roots of trees of different ages and heights was measured in the deciduous temperate species Nothofagus pumilio. An ontogenetic decrease in NSCs indicates support for C limitation. Furthermore, the importance of drought in altering the C balance with ontogeny was assessed by sampling the same species in Mediterranean and humid climate locations in the southern Andes of Chile. Wood density (WD) and stable carbon isotope ratios (δ13C) were also determined to examine drought constraints on C gain. Key Results At both locations, it was effectively found that tree growth ultimately decreased with tree age and height. It was found, however, that NSC concentrations did not decrease with tree age or height when WD was considered, suggesting that C limitation is not the ultimate mechanism causing the age/height-related declining tree growth. δ13C decreased with tree age/height at the Mediterranean site only; drought effect increased with tree age/height, but this pattern was not mirrored by the levels of NSCs. Conclusions The results indicate that concentrations of C storage in N. pumilio trees do not decrease with tree age or height, and that reduced C assimilation due to summer drought does not alter this pattern. PMID:21852277
The Proteasome and Oxidative Stress in Alzheimer's Disease.
Bonet-Costa, Vicent; Pomatto, Laura Corrales-Diaz; Davies, Kelvin J A
2016-12-01
Alzheimer's disease is a neurodegenerative disorder that is projected to exceed more than 100 million cases worldwide by 2050. Aging is considered the primary risk factor for some 90% of Alzheimer's cases but a significant 10% of patients suffer from aggressive, early-onset forms of the disease. There is currently no effective Alzheimer's treatment and this, coupled with a growing aging population, highlights the necessity to understand the mechanism(s) of disease initiation and propagation. A major hallmark of Alzheimer's disease pathology is the accumulation of amyloid-β (Aβ) aggregates (an early marker of Alzheimer's disease), and neurofibrillary tangles, comprising the hyper-phosphorylated microtubule-associated protein Tau. Recent Advances: Protein oxidation is frequently invoked as a potential factor in the progression of Alzheimer's disease; however, whether it is a cause or a consequence of the pathology is still being debated. The Proteasome complex is a major regulator of intracellular protein quality control and an essential proteolytic enzyme for the processing of both Aβ and Tau. Recent studies have indicated that both protein oxidation and excessive phosphorylation may limit Proteasomal processing of Aβ and Tau in Alzheimer's disease. Thus, the Proteasome may be a key factor in understanding the development of Alzheimer's disease pathology; however, its significance is still very much under investigation. Discovering how the proteasome is affected, regulated, or dysregulated in Alzheimer's disease could be a valuable tool in the efforts to understand and, ultimately, eradicate the disease. Antioxid. Redox Signal. 25, 886-901.
Ross, Jennifer A; Shipp, Eva M; Trueblood, Amber B; Bhattacharya, Amit
2016-08-01
To honor Tom Waters's work on emerging occupational health issues, we review the literature on physical along with chemical exposures and their impact on functional outcomes. Many occupations present the opportunity for exposure to multiple hazardous exposures, including both physical and chemical factors. However, little is known about how these different factors affect functional ability and injury. The goal of this review is to examine the relationships between these exposures, impairment of the neuromuscular and musculoskeletal systems, functional outcomes, and health problems with a focus on acute injury. Literature was identified using online databases, including PubMed, Ovid Medline, and Google Scholar. References from included articles were searched for additional relevant articles. This review documented the limited existing literature that discussed cognitive impairment and functional disorders via neurotoxicity for physical exposures (heat and repetitive loading) and chemical exposures (pesticides, volatile organic compounds [VOCs], and heavy metals). This review supports that workers are exposed to physical and chemical exposures that are associated with negative health effects, including functional impairment and injury. Innovation in exposure assessment with respect to quantifying the joint exposure to these different exposures is especially needed for developing risk assessment models and, ultimately, preventive measures. Along with physical exposures, chemical exposures need to be considered, alone and in combination, in assessing functional ability and occupationally related injuries. © 2016, Human Factors and Ergonomics Society.
Stroke Prevention in Atrial Fibrillation: Focus on Latin America
Massaro, Ayrton R.; Lippp, Gregory Y. H.
2016-01-01
Atrial fibrillation (AF) is the most common sustained cardiac arrhythmia, with an estimated prevalence of 1-2% in North America and Europe. The increased prevalence of AF in Latin America is associated with an ageing general population, along with poor control of key risk factors, including hypertension. As a result, stroke prevalence and associated mortality have increased dramatically in the region. Therefore, the need for effective anticoagulation strategies in Latin America is clear. The aim of this review is to provide a contemporary overview of anticoagulants for stroke prevention. The use of vitamin K antagonists (VKAs, eg, warfarin) and aspirin in the prevention of stroke in patients with AF in Latin America remains common, although around one fifth of all AF patients receive no anticoagulation. Warfarin use is complicated by a lack of access to effective monitoring services coupled with an unpredictable pharmacokinetic profile. The overuse of aspirin is associated with significant bleeding risks and reduced efficacy for stroke prevention in this patient group. The non-VKA oral anticoagulants (NOACbs) represent a potential means of overcoming many limitations associated with VKA and aspirin use, including a reduction in the need for monitoring and a reduced risk of hemorrhagic events. The ultimate decision of which anticoagulant drug to utilize in AF patients depends on a multitude of factors. More research is needed to appreciate the impact of these factors in the Latin American population and thereby reduce the burden of AF-associated stroke in this region. PMID:28558081
Development of an inhalation unit risk factor for isoprene.
Haney, Joseph T; Phillips, Tracie; Sielken, Robert L; Valdez-Flores, Ciriaco
2015-12-01
A unit risk factor (URF) was developed for isoprene based on evaluation of three animal studies with adequate data to perform dose-response modeling (NTP, 1994, 1999; Placke et al., 1996). Ultimately, the URF of 6.2E-08 per ppb (2.2E-08 per μg/m(3)) was based on the 95% lower confidence limit on the effective concentration corresponding to 10% extra risk for liver carcinoma in male B6C3F1 mice after incorporating appropriate adjustment factors for species differences in target tissue metabolite concentrations and inhalation dosimetry. The corresponding lifetime air concentration at the 1 in 100,000 no significant excess risk level is 160 ppb (450 μg/m(3)). This concentration is almost 4400 times lower than the lowest exposure level associated with statistically increased liver carcinoma in B6C3F1 mice in the key study (700 ppm in Placke et al., 1996) and is above typical isoprene breath concentrations reported in the scientific literature. Continuous lifetime environmental exposure to the 1 in 100,000 excess risk level of 160 ppb would be expected to raise the human blood isoprene area under the curve (AUC) less than one-third of the standard deviation of the endogenous mean blood AUC. The mean for ambient air monitoring sites in Texas (2005-2014) is approximately 0.13 ppb. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.
Developing a robust methodology for assessing the value of weather/climate services
NASA Astrophysics Data System (ADS)
Krijnen, Justin; Golding, Nicola; Buontempo, Carlo
2016-04-01
Increasingly, scientists involved in providing weather and climate services are expected to demonstrate the value of their work for end users in order to justify the costs of developing and delivering these services. This talk will outline different approaches that can be used to assess the socio-economic benefits of weather and climate services, including, among others, willingness to pay and avoided costs. The advantages and limitations of these methods will be discussed and relevant case-studies will be used to illustrate each approach. The choice of valuation method may be influenced by different factors, such as resource and time constraints and the end purposes of the study. In addition, there are important methodological differences which will affect the value assessed. For instance the ultimate value of a weather/climate forecast to a decision-maker will not only depend on forecast accuracy but also on other factors, such as how the forecast is communicated to and consequently interpreted by the end-user. Thus, excluding these additional factors may result in inaccurate socio-economic value estimates. In order to reduce the inaccuracies in this valuation process we propose an approach that assesses how the initial weather/climate forecast information can be incorporated within the value chain of a given sector, taking into account value gains and losses at each stage of the delivery process. By this we aim to more accurately depict the socio-economic benefits of a weather/climate forecast to decision-makers.
Diversity of the Gastric Microbiota in Thoroughbred Racehorses Having Gastric Ulcer.
Dong, Hee-Jin; Ho, Hungwui; Hwang, Hyeshin; Kim, Yongbaek; Han, Janet; Lee, Inhyung; Cho, Seongbeom
2016-04-28
Equine gastric ulcer syndrome is one of the most frequently reported diseases in thoroughbred racehorses. Although several risk factors for the development of gastric ulcers have been widely studied, investigation of microbiological factors has been limited. In this study, the presence of Helicobacter spp. and the gastric microbial communities of thoroughbred racehorses having mild to severe gastric ulcers were investigated. Although Helicobacter spp. were not detected using culture and PCR techniques from 52 gastric biopsies and 52 fecal samples, the genomic sequences of H. pylori and H. ganmani were detected using nextgeneration sequencing techniques from 2 out of 10 representative gastric samples. The gastric microbiota of horses was mainly composed of Firmicutes (50.0%), Proteobacteria (18.7%), Bacteroidetes (14.4%), and Actinobacteria (9.7%), but the proportion of each phylum varied among samples. There was no major difference in microbial composition among samples having mild to severe gastric ulcers. Using phylogenetic analysis, three distinct clusters were observed, and one cluster differed from the other two clusters in the frequency of feeding, amount of water consumption, and type of bedding. To the best of our knowledge, this is the first study to investigate the gastric microbiota of thoroughbred racehorses having gastric ulcer and to evaluate the microbial diversity in relation to the severity of gastric ulcer and management factors. This study is important for further exploration of the gastric microbiota in racehorses and is ultimately applicable to improving animal and human health.
Effect of laser frequency noise on fiber-optic frequency reference distribution
NASA Technical Reports Server (NTRS)
Logan, R. T., Jr.; Lutes, G. F.; Maleki, L.
1989-01-01
The effect of the linewidth of a single longitude-mode laser on the frequency stability of a frequency reference transmitted over a single-mode optical fiber is analyzed. The interaction of the random laser frequency deviations with the dispersion of the optical fiber is considered to determine theoretically the effect on the Allan deviation (square root of the Allan variance) of the transmitted frequency reference. It is shown that the magnitude of this effect may determine the limit of the ultimate stability possible for frequency reference transmission on optical fiber, but is not a serious limitation to present system performance.
NASA Astrophysics Data System (ADS)
Wanke, R.; Hassink, G. W. J.; Stephanos, C.; Rastegar, I.; Braun, W.; Mannhart, J.
2016-06-01
Mobile energy converters require, in addition to high conversion efficiency and low cost, a low mass. We propose to utilize thermoelectronic converters that use 2D-materials such as graphene for their gate electrodes. Deriving the ultimate limit for their specific energy output, we show that the positive energy output is likely close to the fundamental limit for any conversion of heat into electric power. These converters may be valuable as electric power sources of spacecraft, and with the addition of vacuum enclosures, for power generation in electric planes and cars.