The Ultimate Flag Games.

ERIC Educational Resources Information Center

Angel, Kenny; Sutton, Nancy

This paper describes six Ultimate Flag Games which offer a change from traditional games and sports that are usually geared toward athletically inclined students. These new games, aimed at middle school through college students, allow for success from the least-skilled through the most athletically talented students. Players are ability grouped…

Efficacy Outcome Measures for Procedural Sedation Clinical Trials in Adults: An ACTTION Systematic Review.

PubMed

Williams, Mark R; McKeown, Andrew; Dexter, Franklin; Miner, James R; Sessler, Daniel I; Vargo, John; Turk, Dennis C; Dworkin, Robert H

2016-01-01

Successful procedural sedation represents a spectrum of patient- and clinician-related goals. The absence of a gold-standard measure of the efficacy of procedural sedation has led to a variety of outcomes being used in clinical trials, with the consequent lack of consistency among measures, making comparisons among trials and meta-analyses challenging. We evaluated which existing measures have undergone psychometric analysis in a procedural sedation setting and whether the validity of any of these measures support their use across the range of procedures for which sedation is indicated. Numerous measures were found to have been used in clinical research on procedural sedation across a wide range of procedures. However, reliability and validity have been evaluated for only a limited number of sedation scales, observer-rated pain/discomfort scales, and satisfaction measures in only a few categories of procedures. Typically, studies only examined 1 or 2 aspects of scale validity. The results are likely unique to the specific clinical settings they were tested in. Certain scales, for example, those requiring motor stimulation, are unsuitable to evaluate sedation for procedures where movement is prohibited (e.g., magnetic resonance imaging scans). Further work is required to evaluate existing measures for procedures for which they were not developed. Depending on the outcomes of these efforts, it might ultimately be necessary to consider measures of sedation efficacy to be procedure specific.

Education and Ultimate Meaning

ERIC Educational Resources Information Center

Schinkel, Anders

2015-01-01

Richard Peters and John White have both argued that education should contribute to the meaning people are able to find in or give to life. Both dismiss the idea of ultimate or profound meaning ("the meaning of life") in favour of ordinary meaning, or "meaning in life". Thus they exemplify the trend visible also in the general…

Ultimate RHIC Performance Estimates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hahn, H.

1986-11-10

The RHIC performance estimates for pp operation given in the Conceptual Design report are intentionally conservative as to energy and luminosity. The ultimate RHIC performance was estimated by an ad-hoc comittee with F.Dell, H. Foelsche, H. Hahn, S.Y. Lee, G. Parzen, E. Raka, S. Tepikian, and P. Thompson as members. The present note summarizes the committee's conclusions.

Reliability of Hull Girder Ultimate Strength of Steel Ships

NASA Astrophysics Data System (ADS)

Da-wei, Gao; Gui-jie, Shi

2018-03-01

Hull girder ultimate strength is an evaluation index reflecting the true safety margin or structural redundancy about container ships. Especially, after the hull girder fracture accident of the MOL COMFORT, the 8,000TEU class large container ship, on June 17 2013, larger container ship safety has been paid on much more attention. In this paper, different methods of calculating hull girder ultimate strength are firstly discussed and compared with. The bending ultimate strength can be analyzed by nonlinear finite element method (NFEM) and increment-iterative method, and also the shear ultimate strength can be analyzed by NFEM and simple equations. Then, the probability distribution of hull girder wave loads and still water loads of container ship are summarized. At last, the reliability of hull girder ultimate strength under bending moment and shear forces for three container ships is analyzed by using a first order method. The conclusions can be applied to give guidance for ship design and safety evaluation.

Ultimate fate of constrained voters

NASA Astrophysics Data System (ADS)

Vazquez, F.; Redner, S.

2004-09-01

We examine the ultimate fate of individual opinions in a socially interacting population of leftists, centrists and rightists. In an elemental interaction between agents, a centrist and a leftist can both become centrists or both become leftists with equal rates (and similarly for a centrist and a rightist). However leftists and rightists do not interact. This interaction step between pairs of agents is applied repeatedly until the system can no longer evolve. In the mean-field limit, we determine the exact probability that the system reaches consensus (either leftist, rightist or centrist) or a frozen mixture of leftists and rightists as a function of the initial composition of the population. We also determine the mean time until the final state is reached. Some implications of our results for the ultimate fate in a limit of the Axelrod model are discussed.

Polarization of perceived Procedural Justice.

PubMed

Flint, Douglas H; Hernandez-Marrero, Pablo; Wielemaker, Martin

2006-02-01

This study examined polarization of perceptions of Procedural Justice. Two polarization mechanisms are examined, Persuasive Arguments and Social Comparisons. Participants were students enrolled in a first-year introductory business class. There were 216 participants in the Persuasive Arguments study, 429 in the Social Comparisons study. The average age of all participants was 22.3 yr. (SD = 2.1); 56% were women. Fields of study represented were business, engineering, information technology, and sports. Analysis showed under conditions of low Procedural Justice, polarization effects were only found with the Persuasive Arguments mechanism. Under conditions of high Procedural Justice, polarization effects were only found with Social Comparisons. Implications for group polarization and Procedural Justice theories are considered.

Ultimate Educational Aims, Overridingness, and Personal Well-Being

ERIC Educational Resources Information Center

Haji, Ishtiyaque; Cuypers, Stefaan E.

2011-01-01

Discussion regarding education's aims, especially its ultimate aims, is a key topic in the philosophy of education. These aims or values play a pivotal role in regulating and structuring moral and other types of normative education. We outline two plausible strategies to identify and justify education's ultimate aims. The first associates these…

"Got Disc?" The "Ultimate" Experience in Physical Education

ERIC Educational Resources Information Center

Johnson, Tyler G.; Darst, Paul W.; Brusseau, Timothy A.

2006-01-01

A quality physical education program is one in which students are exposed to and can participate in a variety of sports and activities. One activity that is increasing in popularity in and outside of physical education is the game of "Ultimate." Opportunities to play Ultimate are increasing rapidly in intramural programs and community and…

An Experimental Investigation on the Ultimate Strength of Partially Infilled: Braced Steel Frames

NASA Astrophysics Data System (ADS)

Dubey, Shailendra Kumar Damodar; Kute, Sunil Y.

2017-12-01

Infilled walls are usually, considered as non-structural elements. However, these walls are effective in carrying lateral loads. In this regard, an experimental investigation was planned and conducted to study the effect of braced and partially infilled steel frames with cement mortar and concrete in comparison to the bare frames. All these frames were tested up to collapse and subjected only to horizontal loads to obtain an effective and possible solution for soft storey which are generally not infilled. In comparison to bare steel frames, partially infilled frames have an increase of lateral load capacity by 45-60%. Central bracing is more effective than that of the corner bracing. For the same load partially infilled frames have significantly less deflection than that of the bare frames. A reduced load factor is suggested for the design of soft storey columns with the partial infills. A mathematical model has been proposed to calculate the theoretical ultimate load for the braced, cement mortar and concrete partial infilled frames.

On Two-Stage Multiple Comparison Procedures When There Are Unequal Sample Sizes in the First Stage.

ERIC Educational Resources Information Center

Wilcox, Rand R.

1984-01-01

Two stage multiple-comparison procedures give an exact solution to problems of power and Type I errors, but require equal sample sizes in the first stage. This paper suggests a method of evaluating the experimentwise Type I error probability when the first stage has unequal sample sizes. (Author/BW)

Experimental and finite element study of ultimate strength of continuous composite concrete slabs with steel decking

NASA Astrophysics Data System (ADS)

Gholamhoseini, Alireza

2018-03-01

Composite one-way concrete slabs with profiled steel decking as permanent formwork are commonly used in the construction industry. The steel decking supports the wet concrete of a cast in situ reinforced or post-tensioned concrete slab and, after the concrete sets, acts as external reinforcement. In this type of slab, longitudinal shear failure between the concrete and the steel decking is the most common type of failure at the ultimate load stage. Design codes require the experimental evaluation of the ultimate load capacity and longitudinal shear strength of each type of steel decking using full-scale tests on simple-span slabs. There is also no procedure in current design codes to evaluate the ultimate load capacity and longitudinal shear strength of continuous composite slabs and this is often assessed experimentally by full-scale tests. This paper presents the results of three full-scale tests up to failure on continuous composite concrete slabs cast with trapezoidal steel decking profile (KF70) that is widely used in Australia. Slab specimens were tested in four-point bending at each span with shear spans of span/4. The longitudinal shear failure of each slab is evaluated and the measured mid-span deflection, the end slip and the mid-span steel and concrete strains are also presented and discussed. Redistribution of bending moment in each slab is presented and discussed. A finite element model is proposed and verified by experimental data using interface element to model the bond properties between steel decking and concrete slab and investigate the ultimate strength of continuous composite concrete slabs.

49 CFR 1017.5 - Hearing procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF TRANSPORTATION GENERAL RULES AND REGULATIONS DEBT COLLECTION-COLLECTION BY OFFSET FROM INDEBTED GOVERNMENT AND FORMER GOVERNMENT EMPLOYEES § 1017.5 Hearing procedures. (a) Upon the Administrative Law Judge... debt. (f) The employee requesting the hearing shall bear the ultimate burden of proof. (g) The evidence...

Ultimate Cost of Building Walls.

ERIC Educational Resources Information Center

Grimm, Clayford T.; Gross, James G.

The need for economic analysis of building walls is discussed, and the factors influencing the ultimate cost of exterior walls are studied. The present worth method is used to analyze three types of exterior non-loadbearing panel or curtain walls. Anticipated costs are expressed in terms of their present value per square foot of wall area. The…

An experimental investigation on the ultimate strength of epoxy repaired braced partial infilled RC frames

NASA Astrophysics Data System (ADS)

Dubey, Shailendra Kumar Damodar; Kute, Sunil

2014-09-01

Due to earthquake, buildings are damaged partially or completely. Particularly structures with soft storey are mostly affected. In general, such damaged structures are repaired and reused. In this regard, an experimental investigation was planned and conducted on models of single-bay, single-storey of partial concrete infilled reinforced concrete (RC) frames up to collapse with corner, central and diagonal steel bracings. Such collapsed frames were repaired with epoxy resin and retested. The initiative was to identify the behaviour, extent of restored ultimate strength and deflection of epoxy-retrofitted frames in comparison to the braced RC frames. The performance of such frames has been considered only for lateral loads. In comparison to bare RC frames, epoxy repaired partial infilled frames have significant increase in the lateral load capacity. Central bracing is more effective than corner and diagonal bracing. For the same load, epoxy repaired frames have comparable deflection than similar braced frames.

The ultimate disposition of depleted uranium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-01

Significant amounts of the depleted uranium (DU) created by past uranium enrichment activities have been sold, disposed of commercially, or utilized by defense programs. In recent years, however, the demand for DU has become quite small compared to quantities available, and within the US Department of Energy (DOE) there is concern for any risks and/or cost liabilities that might be associated with the ever-growing inventory of this material. As a result, Martin Marietta Energy Systems, Inc. (Energy Systems), was asked to review options and to develop a comprehensive plan for inventory management and the ultimate disposition of DU accumulated atmore » the gaseous diffusion plants (GDPs). An Energy Systems task team, under the chairmanship of T. R. Lemons, was formed in late 1989 to provide advice and guidance for this task. This report reviews options and recommends actions and objectives in the management of working inventories of partially depleted feed (PDF) materials and for the ultimate disposition of fully depleted uranium (FDU). Actions that should be considered are as follows. (1) Inspect UF{sub 6} cylinders on a semiannual basis. (2) Upgrade cylinder maintenance and storage yards. (3) Convert FDU to U{sub 3}O{sub 8} for long-term storage or disposal. This will include provisions for partial recovery of costs to offset those associated with DU inventory management and the ultimate disposal of FDU. Another recommendation is to drop the term tails'' in favor of depleted uranium'' or DU'' because the tails'' label implies that it is waste.'' 13 refs.« less

Probing the Ultimate Limits of Plasmonic Enhancement

PubMed Central

Ciracì, C.; Hill, R. T.; Mock, J. J.; Urzhumov, Y.; Fernández-Domínguez, A. I.; Maier, S. A.; Pendry, J. B.; Chilkoti, A.; Smith, D. R.

2013-01-01

Metals support surface plasmons at optical wavelengths and have the ability to localize light to sub-wavelength regions. The field enhancements that occur in these regions set the ultimate limitations on a wide range of nonlinear and quantum optical phenomena. Here we show that the dominant limiting factor is not the resistive loss of the metal, but the intrinsic nonlocality of its dielectric response. A semi-classical model of the electronic response of a metal places strict bounds on the ultimate field enhancement. We demonstrate the accuracy of this model by studying the optical scattering from gold nanoparticles spaced a few angstroms from a gold film. The bounds derived from the models and experiments impose limitations on all nanophotonic systems. PMID:22936772

Physical Demands in Competitive Ultimate Frisbee.

PubMed

Krustrup, Peter; Mohr, Magni

2015-12-01

The objective was to study game demands in competitive ultimate Frisbee by performing match analysis during a game. Thirteen moderately trained (Yo-Yo intermittent recovery test levels 1 and 2 [Yo-Yo IR1 and IR2] performance: 1790 ± 382 m and 657 ± 225 m, respectively) competitive male ultimate Frisbee athletes played a game in which activity profile using Global Positioning System (GPS) technology and heart rate (HR) were recorded. Game HRmean and HRpeak were 82 ± 2% and 99 ± 1% of maximum heart rate, respectively. Total game distance was 4.70 ± 0.47 km, of which 0.63 ± 0.14 km was high-intensity running and 0.21 ± 0.11 km was sprinting. In the second half, 10% less (p ≤ 0.05) ground was covered with high-intensity running compared with the first half (0.28 ± 0.08 km vs. 0.31 ± 0.07 km). Less (43-47%; p ≤ 0.05) high-intensity running was performed in the third 9-minute period of each half compared with the first two 9-minute periods of the same half. Players performed 17.4 ± 5.7 sprints during the match. Yo-Yo IR2 performance correlated to the amount of high-intensity running in the last 9 minutes of both halves (r = 0.69, p ≤ 0.05), whereas Yo-Yo IR1 performance correlated with total sprint distance (r = 0.74, p ≤ 0.05). Ultimate Frisbee is an intense intermittent team sport with high cardiovascular loading and clear indications of fatigue toward the end of each half. Yo-Yo IR test performances correlate with physical match performance.

15 CFR 748.11 - Statement by Ultimate Consignee and Purchaser.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ultimate consignee, provided the required statements are contained in Block 24 on the license application... copy submitted by the applicant must be of sufficient quality to ensure all assertions made on the...) Form or letter. The ultimate consignee and purchaser must complete either a statement on company...

15 CFR 748.11 - Statement by Ultimate Consignee and Purchaser.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ultimate consignee, provided the required statements are contained in Block 24 on the license application... copy submitted by the applicant must be of sufficient quality to ensure all assertions made on the...) Form or letter. The ultimate consignee and purchaser must complete either a statement on company...

A unified approach for determining the ultimate strength of RC members subjected to combined axial force, bending, shear and torsion

PubMed Central

Huang, Zhen

2017-01-01

This paper uses experimental investigation and theoretical derivation to study the unified failure mechanism and ultimate capacity model of reinforced concrete (RC) members under combined axial, bending, shear and torsion loading. Fifteen RC members are tested under different combinations of compressive axial force, bending, shear and torsion using experimental equipment designed by the authors. The failure mechanism and ultimate strength data for the four groups of tested RC members under different combined loading conditions are investigated and discussed in detail. The experimental research seeks to determine how the ultimate strength of RC members changes with changing combined loads. According to the experimental research, a unified theoretical model is established by determining the shape of the warped failure surface, assuming an appropriate stress distribution on the failure surface, and considering the equilibrium conditions. This unified failure model can be reasonably and systematically changed into well-known failure theories of concrete members under single or combined loading. The unified calculation model could be easily used in design applications with some assumptions and simplifications. Finally, the accuracy of this theoretical unified model is verified by comparisons with experimental results. PMID:28414777

Intra-Beam Scattering, Impedance, and Instabilities in Ultimate Storage Rings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bane, Karl; /SLAC

We have investigated collective effects in an ultimate storage ring, i.e. one with diffraction limited emittances in both planes, using PEP-X as an example. In an ultimate ring intra-beam scattering (IBS) sets the limit of current that can be stored. In PEP-X, a 4.5 GeV ring running round beams at 200 mA in 3300 bunches, IBS doubles the emittances to 11.5 pm at the design current. The Touschek lifetime is 11 hours. Impedance driven collective effects tend not to be important since the beam current is relatively low. We have investigated collective effects in PEP-X, an ultimate storage ring, i.e.more » one with diffraction limited emittances (at one angstrom wavelength) in both planes. In an ultimate ring intra-beam scattering (IBS) sets the limit of current that can be stored. In PEP-X, IBS doubles the emittances to 11.5 pm at the design current of 200 mA, assuming round beams. The Touschek lifetime is quite large in PEP-X, 11.6 hours, and - near the operating point - increases with decreasing emittance. It is, however, a very sensitive function of momentum acceptance. In an ultimate ring like PEP-X impedance driven collective effects tend not to be important since the beam current is relatively low. Before ultimate PEP-X can be realized, the question of how to run a machine with round beams needs serious study. For example, in this report we assumed that the vertical emittance is coupling dominated. It may turn out that using vertical dispersion is a preferable way to generate round beams. The choice will affect IBS and the Touschek effect.« less

Centaur Standard Shroud (CSS) static ultimate load structural tests

NASA Technical Reports Server (NTRS)

1975-01-01

A series of tests were conducted on the jettisonable metallic shroud used on the Titan/Centaur launch vehicle to verify its structural capabilities and to evaluate its structural interaction with the Centaur stage. A flight configured shroud and the interfacing Titan/Centaur structural assemblies were subjected to tests consisting of combinations of applied axial and shear loads to design ultimate values, including a set of tests on thermal conditions and two dynamic response tests to verify the analytical stiffness model. The strength capabilities were demonstrated at ultimate (125 percent of design limit) loads. It was also verified that the spring rate of the flight configured shroud-to-Centaur forward structural deflections of the specimen became nonlinear, as expected, above limit load values. This test series qualification program verified that the Titan/Centaur shroud and the Centaur and Titan interface components are qualified structurally at design ultimate loads.

Silicon wafer-based tandem cells: The ultimate photovoltaic solution?

NASA Astrophysics Data System (ADS)

Green, Martin A.

2014-03-01

Recent large price reductions with wafer-based cells have increased the difficulty of dislodging silicon solar cell technology from its dominant market position. With market leaders expected to be manufacturing modules above 16% efficiency at 0.36/Watt by 2017, even the cost per unit area (60-70/m2) will be difficult for any thin-film photovoltaic technology to significantly undercut. This may make dislodgement likely only by appreciably higher energy conversion efficiency approaches. A silicon wafer-based cell able to capitalize on on-going cost reductions within the mainstream industry, but with an appreciably higher than present efficiency, might therefore provide the ultimate PV solution. With average selling prices of 156 mm quasi-square monocrystalline Si photovoltaic wafers recently approaching 1 (per wafer), wafers now provide clean, low cost templates for overgrowth of thin, wider bandgap high performance cells, nearly doubling silicon's ultimate efficiency potential. The range of possible Si-based tandem approaches is reviewed together with recent results and ultimate prospects.

Comparison study of two procedures for the determination of emamectin benzoate in medicated fish feed.

PubMed

Farer, Leslie J; Hayes, John M

2005-01-01

A new method has been developed for the determination of emamectin benzoate in fish feed. The method uses a wet extraction, cleanup by solid-phase extraction, and quantitation and separation by liquid chromatography (LC). In this paper, we compare the performance of this method with that of a previously reported LC assay for the determination of emamectin benzoate in fish feed. Although similar to the previous method, the new procedure uses a different sample pretreatment, wet extraction, and quantitation method. The performance of the new method was compared with that of the previously reported method by analyses of 22 medicated feed samples from various commercial sources. A comparison of the results presented here reveals slightly lower assay values obtained with the new method. Although a paired sample t-test indicates the difference in results is significant, this difference is within the method precision of either procedure.

Trepanation Procedures/Outcomes: Comparison of Prehistoric Peru with Other Ancient, Medieval, and American Civil War Cranial Surgery.

PubMed

Kushner, David S; Verano, John W; Titelbaum, Anne R

2018-06-01

More prehistoric trepanned crania have been found in Peru than any other location worldwide. We examine trepanation practices and outcomes in Peru over nearly 2000 years from 400 BC to provide a perspective on the procedure with comparison with procedures/outcomes of other ancient, medieval, and American Civil War cranial surgery. Data on trepanation demographics, techniques, and survival rates were collected through the scientific analysis of more than 800 trepanned crania discovered in Peru, through field studies and the courtesy of museums and private collections in the United States and Peru, over nearly 3 decades. Data on procedures and outcomes of cranial surgery ancient, medieval, and during 19th-century through the American Civil war were obtained via a literature review. Successful trepanations from prehistoric times through the American Civil War likely involved shallow surgeries that did not pierce the dura mater. Although there are regional and temporal variations in ancient Peru, overall long-term survival rates for the study series were about 40% in the earliest period (400-200 BC), with improvement to a high of 91% in samples from AD 1000-1400, to an average of 75%-83% during the Inca Period (AD 1400s-1500). In comparison, the average cranial surgery mortality rate during the American Civil war was 46%-56%, and short- and long-term survival rates are unknown. The contrast in outcomes highlights the astonishing success of ancient cranial surgery in Peru in the treatment of living patients. Copyright © 2018 Elsevier Inc. All rights reserved.

Evaluation of multiple comparison correction procedures in drug assessment studies using LORETA maps.

PubMed

Alonso, Joan Francesc; Romero, Sergio; Mañanas, Miguel Ángel; Rojas, Mónica; Riba, Jordi; Barbanoj, Manel José

2015-10-01

The identification of the brain regions involved in the neuropharmacological action is a potential procedure for drug development. These regions are commonly determined by the voxels showing significant statistical differences after comparing placebo-induced effects with drug-elicited effects. LORETA is an electroencephalography (EEG) source imaging technique frequently used to identify brain structures affected by the drug. The aim of the present study was to evaluate different methods for the correction of multiple comparisons in the LORETA maps. These methods which have been commonly used in neuroimaging and also simulated studies have been applied on a real case of pharmaco-EEG study where the effects of increasing benzodiazepine doses on the central nervous system measured by LORETA were investigated. Data consisted of EEG recordings obtained from nine volunteers who received single oral doses of alprazolam 0.25, 0.5, and 1 mg, and placebo in a randomized crossover double-blind design. The identification of active regions was highly dependent on the selected multiple test correction procedure. The combined criteria approach known as cluster mass was useful to reveal that increasing drug doses led to higher intensity and spread of the pharmacologically induced changes in intracerebral current density.

26 CFR 48.6427-8 - Diesel fuel and kerosene; claims by ultimate purchasers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Diesel fuel and kerosene; claims by ultimate... kerosene; claims by ultimate purchasers. (a) Overview. This section provides rules under which ultimate purchasers of taxed diesel fuel and kerosene may claim the income tax credits or payments allowed by section...

26 CFR 48.6427-8 - Diesel fuel and kerosene; claims by ultimate purchasers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 16 2013-04-01 2013-04-01 false Diesel fuel and kerosene; claims by ultimate... kerosene; claims by ultimate purchasers. (a) Overview. This section provides rules under which ultimate purchasers of taxed diesel fuel and kerosene may claim the income tax credits or payments allowed by section...

26 CFR 48.6427-8 - Diesel fuel and kerosene; claims by ultimate purchasers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Diesel fuel and kerosene; claims by ultimate... kerosene; claims by ultimate purchasers. (a) Overview. This section provides rules under which ultimate purchasers of taxed diesel fuel and kerosene may claim the income tax credits or payments allowed by section...

26 CFR 48.6427-8 - Diesel fuel and kerosene; claims by ultimate purchasers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 16 2012-04-01 2012-04-01 false Diesel fuel and kerosene; claims by ultimate... kerosene; claims by ultimate purchasers. (a) Overview. This section provides rules under which ultimate purchasers of taxed diesel fuel and kerosene may claim the income tax credits or payments allowed by section...

Procedural and Logic Programming: A Comparison.

ERIC Educational Resources Information Center

Watkins, Will; And Others

1988-01-01

Examines the similarities and fundamental differences between procedural programing and logic programing by comparing LogoWriter and PROLOG. Suggests that PROLOG may be a good first programing language for students to learn. (MVL)

Ultimate Longitudinal Strength of Composite Ship Hulls

NASA Astrophysics Data System (ADS)

Zhang, Xiangming; Huang, Lingkai; Zhu, Libao; Tang, Yuhang; Wang, Anwen

2017-01-01

A simple analytical model to estimate the longitudinal strength of ship hulls in composite materials under buckling, material failure and ultimate collapse is presented in this paper. Ship hulls are regarded as assemblies of stiffened panels which idealized as group of plate-stiffener combinations. Ultimate strain of the plate-stiffener combination is predicted under buckling or material failure with composite beam-column theory. The effects of initial imperfection of ship hull and eccentricity of load are included. Corresponding longitudinal strengths of ship hull are derived in a straightforward method. A longitudinally framed ship hull made of symmetrically stacked unidirectional plies under sagging is analyzed. The results indicate that present analytical results have a good agreement with FEM method. The initial deflection of ship hull and eccentricity of load can dramatically reduce the bending capacity of ship hull. The proposed formulations provide a simple but useful tool for the longitudinal strength estimation in practical design.

Combined wind turbine fatigue and ultimate load reduction by individual blade control

NASA Astrophysics Data System (ADS)

Han, Y.; Leithead, W. E.

2014-06-01

If each blade of the wind turbine has individual pitch actuator, there is possibility of employing the pitch system to mitigate structural loads through advanced control methods. Previously, considerable reduction of blade lifetime equivalent fatigue loads has been achieved by Individual Blade Control (IBC) and in addition, it has also been shown the potential in blade ultimate loads reduction. However, both fatigue and ultimate loads impact on the design and life of wind turbine blades. In this paper, the design and application of IBC that concurrently reduce both blade fatigue and ultimate loads is investigated. The contributions of blade load spectral components, which are 1P, 2P and edgewise mode from blade in-plane and/or out-of-plane bending moments, are firstly explored. Four different control options for reducing various combinations of these load components are compared. In response to the different spectral peaks of both fatigue and ultimate loads, the controller has been designed so that it can act on different frequency components which vary with wind speed. The performance of the IBC controller on fatigue and ultimate load reduction is assessed by simulating a 5MW exemplar wind turbine. Simulation results show that with a proper selection of controlling inputs at different wind speed, the use of a single combined IBC can achieve satisfactory reduction on both fatigue and ultimate loads.

Excess glycogen does not resolve high ultimate pH of oxidative muscle.

PubMed

England, Eric M; Matarneh, Sulaiman K; Oliver, Emily M; Apaoblaza, Ariel; Scheffler, Tracy L; Shi, Hao; Gerrard, David E

2016-04-01

Skeletal muscle glycogen content can impact the extent of postmortem pH decline. Compared to glycolytic muscles, oxidative muscles contain lower glycogen levels antemortem which may contribute to the higher ultimate pH. In an effort to explore further the participation of glycogen in postmortem metabolism, we postulated that increasing the availability of glycogen would drive additional pH decline in oxidative muscles to equivalent pH values similar to the ultimate pH of glycolytic muscles. Glycolysis and pH declines were compared in porcine longissimus lumborum (glycolytic) and masseter (oxidative) muscles using an in vitro system in the presence of excess glycogen. The ultimate pH of the system containing longissimus lumborum reached a value similar to that observed in intact muscle. The pH decline of the system containing masseter samples stopped prematurely resulting in a higher ultimate pH which was similar to that of intact masseter muscle. To investigate further, we titrated powdered longissimus lumborum and masseter samples in the reaction buffer. As the percentage of glycolytic sample increased, the ultimate pH decreased. These data show that oxidative muscle produces meat with a high ultimate pH regardless of glycogen content and suggest that inherent muscle factors associated with glycolytic muscle control the extent of pH decline in pig muscles. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation of Patient Perceptions After Vestibuloplasty Procedure: A Comparison of Diode Laser and Scalpel Techniques

PubMed Central

Farista, Sana; Koppolu, Pradeep; Baroudi, Kusai; Uppada, Udaykiran; Mishra, Ashank; Savarimath, Abhishek; Lingam, Amara Swapna

2016-01-01

Introduction Inadequate vestibular depth results in poor plaque control owing to an insufficient width of keratinized gingiva. Vestibuloplasty provides the necessary vestibular depth and can be performed either with a scalpel, electrocautery or lasers. Aim To evaluate the patient perceptions related to pain and discomfort on the 1st, 3rd and the 7th day post vestibuloplasty and also assess the healing outcomes related to the treatment of inadequate vestibular depth either with the diode laser or the scalpel. Materials and Methods Twenty patients who had inadequate vestibular depth and required vestibuloplasty were assigned randomly to undergo the procedure either with the scalpel or the laser. The data obtained was analysed for intergroup comparison with an independent paired t-test and intragroup comparison was determined by a paired t-test. Results Intragroup comparison within the laser group for VAS scores of pain and discomfort within all the reported days exhibited a significant difference (p<0.05). Inter group comparison revealed that the patients in the laser group had lower VAS cores for pain and discomfort compared to the scalpel group (p<0.05). Analysis of the three pointer scale for healing revealed that the patients in the laser group exhibited better healing outcomes on the 1st, 3rd and the 7th day compared to the scalpel group. Conclusion Observations from the study highlight the opinion that laser can be a safe and effective alternative to traditional vestibuloplasty performed with the scalpel. PMID:27437370

75 FR 60133 - Agency Information Collection Activities: Declaration of Ultimate Consignee That Articles Were...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-29

... Activities: Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or... the Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or...: Title: Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or...

Ultimate Strength of Ferro-Geopolymer Composite Built-Up I Joist

NASA Astrophysics Data System (ADS)

Vipin, K. T.; Ganesan, N.; Indira, P. V.

2017-07-01

An experimental study was carried out to study the behaviour of ferro-geopolymer built-up I- joist with different types of mesh reinforcements under flexure. Mesh reinforcements considered in this study are square welded meshes, square woven meshes and hexagonal meshes. First crack load as well as ultimate strength of ferro-geopolymer built-up I-joist in flexure was obtained. An attempt was made to predict the first crack load and ultimate moment capacity of the specimen.

Ultimate Limit State Assessment of Timber Bolt Connection Subjected to Double Unequal Shears

NASA Astrophysics Data System (ADS)

Musilek, Josef; Plachy, Jan

2017-10-01

Nowadays the problems occur when a structure engineer need to assess the ultimate limit state of timber bolt connection which is subjected to double unequal shears. This assessment of ultimate limit state shows the reliability of these connections. In assessing the reliability of this connection in ultimate limit state is a problem, because the formulas and equations that are currently available in design standards and available literature, describing only connections loaded symmetrically - this mean that they describe the timber bolt connection subjected to double equal shears. This fact causes problems because structural engineers have no available support, according to which they could assess reliability of the connection in terms of the ultimate limit state. They must therefore often report following an asymmetrically loaded connections carry about using formulas, which are primarily designed for checking connections loaded symmetrically. This leads logically to the fact that it is not respected by the actual behaviour of the connection in the ultimate limit state. Formulas derived in this paper provide the possibility to assess the ultimate limit state for such connection. The formulas derived in this article allow to carry out a reliability assessment of the ultimate limit state of timber bolt connection subjected to double shear. The using of the formulas derived in this paper leads to better description of the behaviour of this type of connection and also to the more economic design. An example of using these derived formulas is shown. There is shown in this example, how to assess the reliability of timber bolt connection subjected to double unequal shears in terms of ultimate limit states.

78 FR 69101 - Agency Information Collection Activities: Declaration of the Ultimate Consignee That Articles...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-18

... Activities: Declaration of the Ultimate Consignee That Articles Were Exported for Temporary Scientific or... the Declaration of the Ultimate Consignee that Articles were Exported for Temporary Scientific or...: Title: Declaration of the Ultimate Consignee that Articles were Exported for Temporary Scientific or...

Comparison of weighed food record procedures for the reference methods in two validation studies of food frequency questionnaires.

PubMed

Ishii, Yuri; Ishihara, Junko; Takachi, Ribeka; Shinozawa, Yurie; Imaeda, Nahomi; Goto, Chiho; Wakai, Kenji; Takahashi, Toshiaki; Iso, Hiroyasu; Nakamura, Kazutoshi; Tanaka, Junta; Shimazu, Taichi; Yamaji, Taiki; Sasazuki, Shizuka; Sawada, Norie; Iwasaki, Motoki; Mikami, Haruo; Kuriki, Kiyonori; Naito, Mariko; Okamoto, Naoko; Kondo, Fumi; Hosono, Satoyo; Miyagawa, Naoko; Ozaki, Etsuko; Katsuura-Kamano, Sakurako; Ohnaka, Keizo; Nanri, Hinako; Tsunematsu-Nakahata, Noriko; Kayama, Takamasa; Kurihara, Ayako; Kojima, Shiomi; Tanaka, Hideo; Tsugane, Shoichiro

2017-07-01

Although open-ended dietary assessment methods, such as weighed food records (WFRs), are generally considered to be comparable, differences between procedures may influence outcome when WFRs are conducted independently. In this paper, we assess the procedures of WFRs in two studies to describe their dietary assessment procedures and compare the subsequent outcomes. WFRs of 12 days (3 days for four seasons) were conducted as reference methods for intake data, in accordance with the study protocol, among a subsample of participants of two large cohort studies. We compared the WFR procedures descriptively. We also compared some dietary intake variables, such as the frequency of foods and dishes and contributing foods, to determine whether there were differences in the portion size distribution and intra- and inter-individual variation in nutrient intakes caused by the difference in procedures. General procedures of the dietary records were conducted in accordance with the National Health and Nutrition Survey and were the same for both studies. Differences were seen in 1) selection of multiple days (non-consecutive days versus consecutive days); and 2) survey sheet recording method (individual versus family participation). However, the foods contributing to intake of energy and selected nutrients, the portion size distribution, and intra- and inter-individual variation in nutrient intakes were similar between the two studies. Our comparison of WFR procedures in two independent studies revealed several differences. Notwithstanding these procedural differences, however, the subsequent outcomes were similar. Copyright © 2017 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

ULTIMATE: a deployable multiple integral field unit for Subaru

NASA Astrophysics Data System (ADS)

Ellis, S. C.; Zhelem, Ross; Brown, David; Staszak, Nicholas F.; Lidman, Chris; Nataf, David M.; Casey, Andrew R.; Xavier, Pascal; Sheinis, Andrew; Gillingham, Peter; Tims, Julia; Lawrence, Jon; Bryant, Julia; Sharp, Rob

2016-08-01

ULTIMATE is an instrument concept under development at the AAO, for the Subaru Telescope, which will have the unique combination of ground layer adaptive optics feeding multiple deployable integral field units. This will allow ULTIMATE to probe unexplored parameter space, enabling science cases such as the evolution of galaxies at z 0:5 to 1.5, and the dark matter content of the inner part of our Galaxy. ULTIMATE will use Starbugs to position between 7 and 13 IFUs over a 14 × 8 arcmin field-of-view, pro- vided by a new wide-field corrector. All Starbugs can be positioned simultaneously, to an accuracy of better than 5 milli-arcsec within the typical slew-time of the telescope, allowing for very efficient re-configuration between observations. The IFUs will feed either the near-infrared nuMOIRCS or the visible/ near-infrared PFS spectrographs, or both. Future possible upgrades include the possibility of purpose built spectrographs and incorporating OH suppression using fibre Bragg gratings. We describe the science case and resulting design requirements, the baseline instrument concept, and the expected performance of the instrument.

Procedure for calculating estimated ultimate recoveries of Bakken and Three Forks Formations horizontal wells in the Williston Basin

USGS Publications Warehouse

Cook, Troy A.

2013-01-01

Estimated ultimate recoveries (EURs) are a key component in determining productivity of wells in continuous-type oil and gas reservoirs. EURs form the foundation of a well-performance-based assessment methodology initially developed by the U.S. Geological Survey (USGS; Schmoker, 1999). This methodology was formally reviewed by the American Association of Petroleum Geologists Committee on Resource Evaluation (Curtis and others, 2001). The EUR estimation methodology described in this paper was used in the 2013 USGS assessment of continuous oil resources in the Bakken and Three Forks Formations and incorporates uncertainties that would not normally be included in a basic decline-curve calculation. These uncertainties relate to (1) the mean time before failure of the entire well-production system (excluding economics), (2) the uncertainty of when (and if) a stable hyperbolic-decline profile is revealed in the production data, (3) the particular formation involved, (4) relations between initial production rates and a stable hyperbolic-decline profile, and (5) the final behavior of the decline extrapolation as production becomes more dependent on matrix storage.

A Comparison of Fospropofol to Midazolam for Moderate Sedation During Outpatient Dental Procedures

PubMed Central

Yen, Philip; Prior, Simon; Riley, Cara; Johnston, William; Smiley, Megann; Thikkurissy, Sarat

2013-01-01

Moderate intravenous (IV) sedation combined with local anesthesia is common for outpatient oral surgery procedures. An ideal sedative agent must be safe and well tolerated by patients and practitioners. This study evaluated fospropofol, a relatively new sedative/hypnotic, in comparison to midazolam, a commonly used benzodiazepine, for IV moderate sedation during oral and maxillofacial surgery. Sixty patients were randomly assigned to either the fospropofol or the midazolam group. Each participant received 1 μg/kg of fentanyl prior to administration of the selected sedative. Those in the fospropofol group received an initial dose of 6.5 mg/kg, with 1.6 mg/kg supplemental doses as needed. Those in the midazolam group received initial doses of 0.05 mg/kg, followed by 0.02 mg/kg supplemental doses. The quality of sedation in each patient was evaluated with regard to (a) onset of sedation, maintenance, and recovery profile; (b) patient and surgeon satisfaction; and (c) hemodynamic stability and adverse effects. The fospropofol group demonstrated shorter physical recovery times than midazolam patients, taking a mean of 11.6 minutes versus 18.4 minutes for physical recovery (P = .007). Cognitive recovery comparison did not find any difference with a mean of 7.5 minutes versus 8.8 minutes between the 2 drug groups (P = .123). The fospropofol group had a higher rate of local anesthetic injection recall (90.5 vs 44.4%, P = .004). Other parameters of recall were comparable. Two adverse effects demonstrated significance, with more patients in the midazolam group experiencing tachycardia (48.2 vs 9.4%, P = .001), and more patients in the fospropofol group experiencing perineal discomfort (40.6 vs 0, P < .001). No significant difference was found in any other measures of sedation safety, maintenance, or satisfaction. Fospropofol, when administered intravenously by a dentist anesthesiologist at the indicated dose in this study, appears to be a safe, well-tolerated alternative to

The legal and ethical implications of consent to nursing procedures.

PubMed

Power, K J

Nurses are increasingly expanding their practice to include many more invasive procedures. Consequently, there is a need to re-examine nurses' responsibilities in relation to obtaining consent for nursing as opposed to medical procedures. Fully informed consent is not a legal requirement in England, for either medical or nursing procedures. However, this article argues that to comply with the standard set by the Code of Professional Conduct nurses should obtain informed consent for any proposed procedure they undertake. The concept of informed consent is examined and applied to practice. Ultimately, nurses are charged with four key tasks in relation to securing consent for nursing procedures: educating themselves about the risks and benefits of the procedures they propose to undertake; conveying this information to patients; assessing their understanding of the information given; and endeavouring to support the patient in his/her decision.

26 CFR 48.6427-11 - Kerosene; claims by registered ultimate vendors (blending).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Kerosene; claims by registered ultimate vendors... Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6427-11 Kerosene... certain registered ultimate vendors of taxed kerosene may claim the income tax credits or payments allowed...

26 CFR 48.6427-11 - Kerosene; claims by registered ultimate vendors (blending).

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 16 2012-04-01 2012-04-01 false Kerosene; claims by registered ultimate vendors... Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6427-11 Kerosene... certain registered ultimate vendors of taxed kerosene may claim the income tax credits or payments allowed...

26 CFR 48.6427-11 - Kerosene; claims by registered ultimate vendors (blending).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 16 2013-04-01 2013-04-01 false Kerosene; claims by registered ultimate vendors... Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6427-11 Kerosene... certain registered ultimate vendors of taxed kerosene may claim the income tax credits or payments allowed...

26 CFR 48.6427-11 - Kerosene; claims by registered ultimate vendors (blending).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Kerosene; claims by registered ultimate vendors... Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6427-11 Kerosene... certain registered ultimate vendors of taxed kerosene may claim the income tax credits or payments allowed...

A comparison of recovery of virus from wastewaters by beef extract-Celite, ferric chloride, and filter concentration procedures.

PubMed

Dahling, D R; Wright, B A

1988-12-01

An improved concentration method using sample volumes as large as 1500 ml has been developed to monitor for viruses in wastewaters. Non-precipitating dry beef extract powder is added to wastewater samples to give a 3% concentration and mixed until dissolved. This is followed by the addition of Celite as a virus adsorbent. By manipulating pH, viruses are eluted from the Celite in small volumes of phosphate buffer. This procedure was further tested without the aid of the Celite additives using a precipitating beef extract powder and substituting FeCl3 as an alternate reagent for the Celite. Comparison testing was also made with the currently recommended cartridge and disc filter procedures. In all cases, the non-precipitating beef extract-Celite method gave higher recovery rates in highly polluted waters.

Optimized molten salt receivers for ultimate trough solar fields

NASA Astrophysics Data System (ADS)

Riffelmann, Klaus-J.; Richert, Timo; Kuckelkorn, Thomas

2016-05-01

Today parabolic trough collectors are the most successful concentrating solar power (CSP) technology. For the next development step new systems with increased operation temperature and new heat transfer fluids (HTF) are currently developed. Although the first power tower projects have successfully been realized, up to now there is no evidence of an all-dominant economic or technical advantage of power tower or parabolic trough. The development of parabolic trough technology towards higher performance and significant cost reduction have led to significant improvements in competitiveness. The use of molten salt instead of synthetic oil as heat transfer fluid will bring down the levelized costs of electricity (LCOE) even further while providing dispatchable energy with high capacity factors. FLABEG has developed the Ultimate TroughTM (UT) collector, jointly with sbp Sonne GmbH and supported by public funds. Due to its validated high optical accuracy, the collector is very suitable to operate efficiently at elevated temperatures up to 550 °C. SCHOTT will drive the key-innovations by introducing the 4th generation solar receiver that addresses the most significant performance and cost improvement measures. The new receivers have been completely redesigned to provide a product platform that is ready for high temperature operation up to 550 °C. Moreover distinct product features have been introduced to reduce costs and risks in solar field assembly and installation. The increased material and design challenges incurred with the high temperature operation have been reflected in sophisticated qualification and validation procedures.

Comparison of ketamine and ketofol for deep sedation and analgesia in children undergoing laser procedure.

PubMed

Stevic, Marija; Ristic, Nina; Budic, Ivana; Ladjevic, Nebojsa; Trifunovic, Branislav; Rakic, Ivan; Majstorovic, Marko; Burazor, Ivana; Simic, Dusica

2017-09-01

The aim of our study was to research and evaluate cardiovascular and respiratory stability, clinical efficacy, and safety of two different anesthetic agents in pediatric patients who underwent Pulse dye (wavelength 595 nm, pulse duration 0-40 ms, power 0-40 J) and CO 2 (wavelength 10,600 nm, intensity-fraxel mod with SX index 4 to 8, power 0-30 W) laser procedure. This prospective non-blinded study included 203 pediatric patients ASA I-II, aged between 1 month and 12 years who underwent short-term procedural sedation and analgesia for the laser procedure. After oral premedication with midazolam, 103 children were analgo-sedated with ketamine and fentanyl (K group) and 100 with ketofol and fentanyl (KT group). Vital signs, applied drug doses, pulse oximetry, and parental satisfaction questionnaire were used to compare these two groups. Statistical differences were tested using Student's t test, Mann-Whitney U test, chi-square test, and Fisher's exact test. Receiver operating characteristic (ROC) curve analysis was used to assess the cut-off value of the duration of anesthesia predicting apnea. Tachycardia was recorded in a significantly higher number of patients who received ketamine as the anesthetic agent (35.9 vs. 3% respectively). Hypertension was also significantly more frequent in patients who received ketamine in comparison with patients who received ketofol (25.2 vs. 3%). Laryngospasm was not observed in both examined groups. There was no statistically significant difference between groups in satisfaction of parents and doctors. Apnea and respiratory depression occurred significantly more frequent in ketofol than in ketamine group (12 vs. 0.97% and 13 vs. 0%). Based on ROC analysis for apnea, we found a significantly higher number of patients with apnea in the ketofol group when duration of anesthesia was longer than 17 min. Our study has shown that ketofol is more comfortable than ketamine in short-term laser procedures in children, causing less

A method for early determination of meat ultimate pH.

PubMed

Young, O A; West, J; Hart, A L; van Otterdijk, F F H

2004-02-01

A patented method of rapidly determining the ultimate pH from approximate glycolytic potential of muscles of slaughtered animals has been devised. The method is based on the rapid hydrolysis of muscle glycogen to glucose by the enzyme amyloglucosidase and subsequent measurement of the liberated glucose. In acetate buffer at pH 4.5, glucose concentration can be determined in 30 s with domestic meters for diabetes control. The meter response differed from that of glucose in blood, but was linear with concentration. In slurries comprising homogenised meat in acetate buffer and added glucose, a similar linear response was obtained. Amyloglucosidase was capable of rapidly hydrolysing glycogen to glucose in such slurries. In the 24 h following slaughter, a decrease in glycogen, as determined by glucose, occurred in parallel with the decline in pH. At the same time, lactate progressively accumulated as expected. Values for the approximate glycolytic potential and (by calibration) ultimate pH, were obtained on prerigor muscle within 7 min of muscle sampling in an industrial environment. The method is suitable for on-line application in beef abattoirs particularly those employing hot boning where ultimate must be known at the grading point.

Comparison of hand hygiene procedures for removing Bacillus cereus spores.

PubMed

Sasahara, Teppei; Hayashi, Shunji; Hosoda, Kouichi; Morisawa, Yuji; Hirai, Yoshikazu

2014-01-01

Bacillus cereus is a spore-forming bacterium. B. cereus occasionally causes nosocomial infections, in which hand contamination with the spores plays an important role. Therefore, hand hygiene is the most important practice for controlling nosocomial B. cereus infections. This study aimed to determine the appropriate hand hygiene procedure for removing B. cereus spores. Thirty volunteers' hands were experimentally contaminated with B. cereus spores, after which they performed 6 different hand hygiene procedures. We compared the efficacy of the procedures in removing the spores from hands. The alcohol-based hand-rubbing procedures scarcely removed them. The soap washing procedures reduced the number of spores by more than 2 log10. Extending the washing time increased the spore-removing efficacy of the washing procedures. There was no significant difference in efficacy between the use of plain soap and antiseptic soap. Handwashing with soap is appropriate for removing B. cereus spores from hands. Alcohol-based hand-rubbing is not effective.

The effects of early post-mortem pH and ultimate pH on level and amount of destructured zones in cooked cured hams.

PubMed

Hugenschmidt, Gabriel; Hadorn, Ruedi; Scheeder, Martin R L; Silacci, Paolo; Scherrer, Daniel; Wenk, Caspar

2010-08-01

Effects of early (1h p.m. and 3h p.m.) and ultimate pH (24h p.m.) on level and amount of destructured zones in cooked cured hams were evaluated. In experiment 1, electrically stimulated (50 V, 14 Hz, 2 x 90s) and non-stimulated carcass halves, both in combination with two cooling procedures (2 degrees C from 30 min p.m. vs. 120 min p.m.) resulted in 1.5-35.2g/kg destructured zones in silversides and 58.4-120.0 g/kg destructured zones in topsides. A high temperature 1h p.m. in silversides (P=0.067) and topsides (P=0.054) was identified as the most important predictor for the defect. In experiment 2, cooked cured hams from topsides selected according to ultimate pH groups (pH<5.5, pH 5.5-5.7, pH>5.7) showed between 12.3 and 61.8 g/kg destructured zones. Ultimate pH was specified as most important, however, statistically still not significant (P=0.135) predictor for the defect. Chemical analysis resulted in low crude ash and high dry matter content as being characteristic for the defect. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Ultimate concerns in late modernity: Archer, Bourdieu and reflexivity.

PubMed

Farrugia, David; Woodman, Dan

2015-12-01

Through a critique of Margaret Archer's theory of reflexivity, this paper explores the theoretical contribution of a Bourdieusian sociology of the subject for understanding social change. Archer's theory of reflexivity holds that conscious 'internal conversations' are the motor of society, central both to human subjectivity and to the 'reflexive imperative' of late modernity. This is established through critiques of Bourdieu, who is held to erase creativity and meaningful personal investments from subjectivity, and late modernity is depicted as a time when a 'situational logic of opportunity' renders embodied dispositions and the reproduction of symbolic advantages obsolete. Maintaining Archer's focus on 'ultimate concerns' in a context of social change, this paper argues that her theory of reflexivity is established through a narrow misreading and rejection of Bourdieu's work, which ultimately creates problems for her own approach. Archer's rejection of any pre-reflexive dimensions to subjectivity and social action leaves her unable to sociologically explain the genesis of 'ultimate concerns', and creates an empirically dubious narrative of the consequences of social change. Through a focus on Archer's concept of 'fractured reflexivity', the paper explores the theoretical necessity of habitus and illusio for understanding the social changes that Archer is grappling with. In late modernity, reflexivity is valorized just as the conditions for its successful operation are increasingly foreclosed, creating 'fractured reflexivity' emblematic of the complex contemporary interaction between habitus, illusio, and accelerating social change. © London School of Economics and Political Science 2015.

The Ultimate Factor of Safety for Aircraft and Spacecraft Its History, Applications and Misconceptions

NASA Technical Reports Server (NTRS)

Zipay, John J.; Modlin, C. Thomas, Jr.; Larsen, Curtis E.

2016-01-01

The ultimate factor of safety (FOSULT) concept used in aircraft and spacecraft has evolved over many decades. Currently an FOSULT 1.5 is the FAR-mandated value for aircraft while an FOSULT of 1.4 has been used in various spacecraft. This paper was motivated by the desire to concisely explain the origins, proper interpretation and application of the ultimate factor of safety concept, since the authors have seen throughout their careers many misconceptions and incorrect applications of this concept. The history of the ultimate factor of safety concept is briefly summarized, the proper application of the factor of safety in aircraft design, structural analysis and operations is covered in detail, examples of limit load exceedance in aircraft and spacecraft are discussed, the evolution of the 1.4 FOSULT for spacecraft is described and some misconceptions regarding the ultimate factor of safety concept are addressed. It is hoped that this paper can be a summary resource for engineers to understand the origin, purpose and proper application of the ultimate factor of safety.

Ultimate dynamics of the Kirschner-Panetta model: Tumor eradication and related problems

NASA Astrophysics Data System (ADS)

Starkov, Konstantin E.; Krishchenko, Alexander P.

2017-10-01

In this paper we consider the ultimate dynamics of the Kirschner-Panetta model which was created for studying the immune response to tumors under special types of immunotherapy. New ultimate upper bounds for compact invariant sets of this model are given, as well as sufficient conditions for the existence of a positively invariant polytope. We establish three types of conditions for the nonexistence of compact invariant sets in the domain of the tumor-cell population. Our main results are two types of conditions for global tumor elimination depending on the ratio between the proliferation rate of the immune cells and their mortality rate. These conditions are described in terms of simple algebraic inequalities imposed on model parameters and treatment parameters. Our theoretical studies of ultimate dynamics are complemented by numerical simulation results.

Revisiting perceptions of quality of hospice care: managing for the ultimate referral.

PubMed

Churchman, Richard; York, Grady S; Woodard, Beth; Wainright, Charles; Rau-Foster, Mary

2014-08-01

Hospice services provided in the final months of life are delivered through complex interpersonal relationships between caregivers, patients, and families. Often, service value and quality are defined by these interpersonal interactions. This understanding provides hospice leaders with an enormous opportunity to create processes that provide the optimal level of care during the last months of life. The authors argue that the ultimate referral is attained when a family member observes the care of a loved one, and the family member conveys a desire to receive the same quality of services their loved one received at that facility. The point of this article is to provide evidence that supports the methods to ultimately enhance the patient's and family's experience and increase the potential for the ultimate referral. © The Author(s) 2013.

26 CFR 48.6427-10 - Kerosene; claims by registered ultimate vendors (blocked pumps).

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 16 2012-04-01 2012-04-01 false Kerosene; claims by registered ultimate vendors... Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6427-10 Kerosene... which certain registered ultimate vendors of taxed kerosene may claim the income tax credits or payments...

26 CFR 48.6427-10 - Kerosene; claims by registered ultimate vendors (blocked pumps).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Kerosene; claims by registered ultimate vendors... Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6427-10 Kerosene... which certain registered ultimate vendors of taxed kerosene may claim the income tax credits or payments...

26 CFR 48.6427-10 - Kerosene; claims by registered ultimate vendors (blocked pumps).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 16 2013-04-01 2013-04-01 false Kerosene; claims by registered ultimate vendors... Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6427-10 Kerosene... which certain registered ultimate vendors of taxed kerosene may claim the income tax credits or payments...

26 CFR 48.6427-10 - Kerosene; claims by registered ultimate vendors (blocked pumps).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Kerosene; claims by registered ultimate vendors... Administrative Provisions of Special Application to Retailers and Manufacturers Taxes § 48.6427-10 Kerosene... which certain registered ultimate vendors of taxed kerosene may claim the income tax credits or payments...

A comparison of vowel normalization procedures for language variation research

NASA Astrophysics Data System (ADS)

Adank, Patti; Smits, Roel; van Hout, Roeland

2004-11-01

An evaluation of vowel normalization procedures for the purpose of studying language variation is presented. The procedures were compared on how effectively they (a) preserve phonemic information, (b) preserve information about the talker's regional background (or sociolinguistic information), and (c) minimize anatomical/physiological variation in acoustic representations of vowels. Recordings were made for 80 female talkers and 80 male talkers of Dutch. These talkers were stratified according to their gender and regional background. The normalization procedures were applied to measurements of the fundamental frequency and the first three formant frequencies for a large set of vowel tokens. The normalization procedures were evaluated through statistical pattern analysis. The results show that normalization procedures that use information across multiple vowels (``vowel-extrinsic'' information) to normalize a single vowel token performed better than those that include only information contained in the vowel token itself (``vowel-intrinsic'' information). Furthermore, the results show that normalization procedures that operate on individual formants performed better than those that use information across multiple formants (e.g., ``formant-extrinsic'' F2-F1). .

A comparison of vowel normalization procedures for language variation research.

PubMed

Adank, Patti; Smits, Roel; van Hout, Roeland

2004-11-01

An evaluation of vowel normalization procedures for the purpose of studying language variation is presented. The procedures were compared on how effectively they (a) preserve phonemic information, (b) preserve information about the talker's regional background (or sociolinguistic information), and (c) minimize anatomical/physiological variation in acoustic representations of vowels. Recordings were made for 80 female talkers and 80 male talkers of Dutch. These talkers were stratified according to their gender and regional background. The normalization procedures were applied to measurements of the fundamental frequency and the first three formant frequencies for a large set of vowel tokens. The normalization procedures were evaluated through statistical pattern analysis. The results show that normalization procedures that use information across multiple vowels ("vowel-extrinsic" information) to normalize a single vowel token performed better than those that include only information contained in the vowel token itself ("vowel-intrinsic" information). Furthermore, the results show that normalization procedures that operate on individual formants performed better than those that use information across multiple formants (e.g., "formant-extrinsic" F2-F1).

Chronic pancreatitis: A surgical disease? Role of the Frey procedure

PubMed Central

Roch, Alexandra; Teyssedou, Jérome; Mutter, Didier; Marescaux, Jacques; Pessaux, Patrick

2014-01-01

Although medical treatment and endoscopic interventions are primarily offered to patients with chronic pancreatitis, approximately 40% to 75% will ultimately require surgery during the course of their disease. Although pancreaticoduodenectomy has been considered the standard surgical procedure because of its favorable results on pain control, its high postoperative complication and pancreatic exocrine or/and endocrine dysfunction rates have led to a growing enthusiasm for duodenal preserving pancreatic head resection. The aim of this review is to better understand the rationale underlying of the Frey procedure in chronic pancreatitis and to analyze its outcome. Because of its hybrid nature, combining both resection and drainage, the Frey procedure has been conceptualized based on the pathophysiology of chronic pancreatitis. The short and long-term outcome, especially pain relief and quality of life, are better after the Frey procedure than after any other surgical procedure performed for chronic pancreatitis. PMID:25068010

7 CFR 4274.308 - Eligibility requirements-Ultimate recipients.

Code of Federal Regulations, 2010 CFR

2010-01-01

... making a loan to one of its members. (c) Any delinquent debt to the Federal Government by the ultimate... authority to incur the debt and carry out the purpose of the loan. (b) To be eligible to receive loans from... rates and terms. (4) Must, along with its principal officers (including their immediate family), hold no...

Delayed temporal discrimination in pigeons: A comparison of two procedures

PubMed Central

Chatlosh, Diane L.; Wasserman, Edward A.

1987-01-01

A within-subjects comparison was made of pigeons' performance on two temporal discrimination procedures that were signaled by differently colored keylight samples. During stimulus trials, a peck on the key displaying a slanted line was reinforced following short keylight samples, and a peck on the key displaying a horizontal line was reinforced following long keylight samples, regardless of the location of the stimuli on those two choice keys. During position trials, a peck on the left key was reinforced following short keylight samples and a peck on the right key was reinforced following long keylight samples, regardless of which line stimulus appeared on the correct key. Thus, on stimulus trials, the correct choice key could not be discriminated prior to the presentation of the test stimuli, whereas on position trials, the correct choice key could be discriminated during the presentation of the sample stimulus. During Phase 1, with a 0-s delay between sample and choice stimuli, discrimination learning was faster on position trials than on stimulus trials for all 4 birds. During Phase 2, 0-, 0.5-, and 1.0-s delays produced differential loss of stimulus control under the two tasks for 2 birds. Response patterns during the delay intervals provided some evidence for differential mediation of the two delayed discriminations. These between-task differences suggest that the same processes may not mediate performance in each. PMID:16812483

Ultimate computing. Biomolecular consciousness and nano Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hameroff, S.R.

1987-01-01

The book advances the premise that the cytoskeleton is the cell's nervous system, the biological controller/computer. If indeed cytoskeletal dynamics in the nanoscale (billionth meter, billionth second) are the texture of intracellular information processing, emerging ''NanoTechnologies'' (scanning tunneling microscopy, Feynman machines, von Neumann replicators, etc.) should enable direct monitoring, decoding and interfacing between biological and technological information devices. This in turn could result in important biomedical applications and perhaps a merger of mind and machine: Ultimate Computing.

On evaluating clustering procedures for use in classification

NASA Technical Reports Server (NTRS)

Pore, M. D.; Moritz, T. E.; Register, D. T.; Yao, S. S.; Eppler, W. G. (Principal Investigator)

1979-01-01

The problem of evaluating clustering algorithms and their respective computer programs for use in a preprocessing step for classification is addressed. In clustering for classification the probability of correct classification is suggested as the ultimate measure of accuracy on training data. A means of implementing this criterion and a measure of cluster purity are discussed. Examples are given. A procedure for cluster labeling that is based on cluster purity and sample size is presented.

The ultimate efficiency of photosensitive systems

NASA Technical Reports Server (NTRS)

Buoncristiani, A. M.; Byvik, C. E.; Smith, B. T.

1981-01-01

These systems have in common two important but not independent features: they can produce a storable fuel, and they are sensitive only to radiant energy with a characteristic absorption spectrum. General analyses of the conversion efficiencies were made using the operational characteristics of each particular system. An efficiency analysis of a generalized system consisting of a blackbody source, a radiant energy converter having a threshold energy and operating temperature, and a reservoir is reported. This analysis is based upon the first and second laws of thermodynamics, and leads to a determination of the limiting or ultimate efficiency for an energy conversion system having a characteristic threshold.

A comparison of intraverbal training procedures for children with autism.

PubMed

Kodak, Tiffany; Fuchtman, Rashea; Paden, Amber

2012-01-01

We compared the effectiveness of three training procedures, echoic and tact prompting plus error correction and a cues-pause-point (CPP) procedure, for increasing intraverbals in 2 children with autism. We also measured echoic behavior that may have interfered with appropriate question answering. Results indicated that echoic prompting with error correction was most effective and the CPP procedure was least effective for increasing intraverbals and decreasing echoic behavior.

A COMPARISON OF INTRAVERBAL TRAINING PROCEDURES FOR CHILDREN WITH AUTISM

PubMed Central

Kodak, Tiffany; Fuchtman, Rashea; Paden, Amber

2012-01-01

We compared the effectiveness of three training procedures, echoic and tact prompting plus error correction and a cues-pause-point (CPP) procedure, for increasing intraverbals in 2 children with autism. We also measured echoic behavior that may have interfered with appropriate question answering. Results indicated that echoic prompting with error correction was most effective and the CPP procedure was least effective for increasing intraverbals and decreasing echoic behavior. PMID:22403459

75 FR 76746 - Agency Information Collection Activities: Declaration of Ultimate Consignee That Articles Were...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

... Activities: Declaration of Ultimate Consignee That Articles Were Exported for Temporary Scientific or... That Articles Were Exported for Temporary Scientific or Educational Purposes. This is a proposed... forms of information. Title: Declaration of Ultimate Consignee That Articles Were Exported for Temporary...

Comparison of measurement methods with a mixed effects procedure accounting for replicated evaluations (COM3PARE): method comparison algorithm implementation for head and neck IGRT positional verification.

PubMed

Roy, Anuradha; Fuller, Clifton D; Rosenthal, David I; Thomas, Charles R

2015-08-28

Comparison of imaging measurement devices in the absence of a gold-standard comparator remains a vexing problem; especially in scenarios where multiple, non-paired, replicated measurements occur, as in image-guided radiotherapy (IGRT). As the number of commercially available IGRT presents a challenge to determine whether different IGRT methods may be used interchangeably, an unmet need conceptually parsimonious and statistically robust method to evaluate the agreement between two methods with replicated observations. Consequently, we sought to determine, using an previously reported head and neck positional verification dataset, the feasibility and utility of a Comparison of Measurement Methods with the Mixed Effects Procedure Accounting for Replicated Evaluations (COM3PARE), a unified conceptual schema and analytic algorithm based upon Roy's linear mixed effects (LME) model with Kronecker product covariance structure in a doubly multivariate set-up, for IGRT method comparison. An anonymized dataset consisting of 100 paired coordinate (X/ measurements from a sequential series of head and neck cancer patients imaged near-simultaneously with cone beam CT (CBCT) and kilovoltage X-ray (KVX) imaging was used for model implementation. Software-suggested CBCT and KVX shifts for the lateral (X), vertical (Y) and longitudinal (Z) dimensions were evaluated for bias, inter-method (between-subject variation), intra-method (within-subject variation), and overall agreement using with a script implementing COM3PARE with the MIXED procedure of the statistical software package SAS (SAS Institute, Cary, NC, USA). COM3PARE showed statistically significant bias agreement and difference in inter-method between CBCT and KVX was observed in the Z-axis (both p - value<0.01). Intra-method and overall agreement differences were noted as statistically significant for both the X- and Z-axes (all p - value<0.01). Using pre-specified criteria, based on intra-method agreement, CBCT was deemed

Optimization and Prediction of Ultimate Tensile Strength in Metal Active Gas Welding.

PubMed

Ampaiboon, Anusit; Lasunon, On-Uma; Bubphachot, Bopit

2015-01-01

We investigated the effect of welding parameters on ultimate tensile strength of structural steel, ST37-2, welded by Metal Active Gas welding. A fractional factorial design was used for determining the significance of six parameters: wire feed rate, welding voltage, welding speed, travel angle, tip-to-work distance, and shielded gas flow rate. A regression model to predict ultimate tensile strength was developed. Finally, we verified optimization of the process parameters experimentally. We achieved an optimum tensile strength (558 MPa) and wire feed rate, 19 m/min, had the greatest effect, followed by tip-to-work distance, 7 mm, welding speed, 200 mm/min, welding voltage, 30 V, and travel angle, 60°. Shield gas flow rate, 10 L/min, was slightly better but had little effect in the 10-20 L/min range. Tests showed that our regression model was able to predict the ultimate tensile strength within 4%.

Sepsis and multiorgan failure following TVT procedure.

PubMed

Stec, Piotr; Connell, Rowan

2014-04-01

Tension-free vaginal tape (TVT), is a commonly performed, low risk procedure for treatment of stress urinary incontinence (SUI). Severe complications are rare, but can be potentially life threatening. We present a case of 66 year old patient who sustained bladder perforation at the time of TVT procedure and subsequently developed sepsis rapidly leading to multi-organ failure and triggering sequence of serious complications. During her inpatient stay she required ITU admission, emergency laparotomy, TVT mesh removal, bowel resection due to ischemic colitis and anticoagulation for pulmonary embolism. Despite of clinical picture of sepsis her microbiology tests were almost consistently negative. This case emphasise importance of awareness and quick recognition of TVT related complications. Patient ultimately survived and recovered thanks to timely and coordinated management by the multidisciplinary team of doctors.

A visual graphic/haptic rendering model for hysteroscopic procedures.

PubMed

Lim, Fabian; Brown, Ian; McColl, Ryan; Seligman, Cory; Alsaraira, Amer

2006-03-01

Hysteroscopy is an extensively popular option in evaluating and treating women with infertility. The procedure utilises an endoscope, inserted through the vagina and cervix to examine the intra-uterine cavity via a monitor. The difficulty of hysteroscopy from the surgeon's perspective is the visual spatial perception of interpreting 3D images on a 2D monitor, and the associated psychomotor skills in overcoming the fulcrum-effect. Despite the widespread use of this procedure, current qualified hysteroscopy surgeons have not been trained the fundamentals through an organised curriculum. The emergence of virtual reality as an educational tool for this procedure, and for other endoscopic procedures, has undoubtedly raised interests. The ultimate objective is for the inclusion of virtual reality training as a mandatory component for gynaecologic endoscopy training. Part of this process involves the design of a simulator, encompassing the technical difficulties and complications associated with the procedure. The proposed research examines fundamental hysteroscopy factors, current training and accreditation, and proposes a hysteroscopic simulator design that is suitable for educating and training.

Effect of load eccentricity and substructure deformation on ultimate strength of shuttle orbiter thermal protection system

NASA Technical Reports Server (NTRS)

Sawyer, J. W.

1981-01-01

The effect of load eccentricity and substructure deformation on the ultimate strength and stress displacement properties of the shuttle orbiter thermal protection system (TPS) was determined. The LI-900 Reusable Surface Insulation (RSI) tiles mounted on the .41 cm thick Strain Isolator Pad (SIP) were investigated. Substructure deformations reduce the ultimate strength of the SIP/tile TPS and increase the scatter in the ultimate strength data. Substructure deformations that occur unsymmetric to the tile can cause the tile to rotate when subjected to a uniform applied load. Load eccentricity reduces SIP/tile TPS ultimate strength and causes tile rotation.

The Measurement of Values: Effects of Different Assessment Procedures

ERIC Educational Resources Information Center

Feather, N. T.

1973-01-01

Rating and pair-comparison procedures for assessing the importance of terminal and instrumental values were compared with the standard ranking procedure developed by Rokeach. Effects of order of presentation of of the value sets were also investigated. Neither procedure nor order had replicable effect though some sex differences were apparent. (TO)

Regions of absolute ultimate boundedness for discrete-time systems.

NASA Technical Reports Server (NTRS)

Siljak, D. D.; Weissenberger, S.

1972-01-01

This paper considers discrete-time systems of the Lur'e-Postnikov class where the linear part is not asymptotically stable and the nonlinear characteristic satisfies only partially the usual sector condition. Estimates of the resulting finite regions of absolute ultimate boundedness are calculated by means of a quadratic Liapunov function.

The Ultimate Sampling Dilemma in Experience-Based Decision Making

ERIC Educational Resources Information Center

Fiedler, Klaus

2008-01-01

Computer simulations and 2 experiments demonstrate the ultimate sampling dilemma, which constitutes a serious obstacle to inductive inferences in a probabilistic world. Participants were asked to take the role of a manager who is to make purchasing decisions based on positive versus negative feedback about 3 providers in 2 different product…

Wilderness education: The ultimate commitment to quality wilderness stewardship

Treesearch

Gregory F. Hansen; Tom Carlson

2007-01-01

The effective planning, implementation, and monitoring of a wilderness education program will ultimately produce measurable results that can be instrumental in achieving wilderness management goals and objectives. This paper will provide a simple step-by-step overview of how to develop and maintain a successful wilderness education program through planning,...

Reduced Design Load Basis for Ultimate Blade Loads Estimation in Multidisciplinary Design Optimization Frameworks

NASA Astrophysics Data System (ADS)

Pavese, Christian; Tibaldi, Carlo; Larsen, Torben J.; Kim, Taeseong; Thomsen, Kenneth

2016-09-01

The aim is to provide a fast and reliable approach to estimate ultimate blade loads for a multidisciplinary design optimization (MDO) framework. For blade design purposes, the standards require a large amount of computationally expensive simulations, which cannot be efficiently run each cost function evaluation of an MDO process. This work describes a method that allows integrating the calculation of the blade load envelopes inside an MDO loop. Ultimate blade load envelopes are calculated for a baseline design and a design obtained after an iteration of an MDO. These envelopes are computed for a full standard design load basis (DLB) and a deterministic reduced DLB. Ultimate loads extracted from the two DLBs with the two blade designs each are compared and analyzed. Although the reduced DLB supplies ultimate loads of different magnitude, the shape of the estimated envelopes are similar to the one computed using the full DLB. This observation is used to propose a scheme that is computationally cheap, and that can be integrated inside an MDO framework, providing a sufficiently reliable estimation of the blade ultimate loading. The latter aspect is of key importance when design variables implementing passive control methodologies are included in the formulation of the optimization problem. An MDO of a 10 MW wind turbine blade is presented as an applied case study to show the efficacy of the reduced DLB concept.

Ultimate Load Behaviour of Reinforced Concrete Beam with Corroded Reinforcement

NASA Astrophysics Data System (ADS)

Kanchana Devi, A.; Ramajaneyulu, K.; Sundarkumar, S.; Ramesh, G.; Bharat Kumar, B. H.; Krishna Moorthy, T. S.

2017-12-01

Corrosion of reinforcement reduces the load carrying capacity, energy dissipation and ductility of Reinforced Concrete (RC) members. In the present study, reinforcements of RC beam are subjected to 10, 25, and 30% corrosion and the respective RC beams are tested to evaluate their ultimate load behaviour. A huge drop in energy dissipation capacity of the RC beam is observed beyond the corrosion level of 10%. Further, nonlinear finite element analysis is employed to assess the load-displacement behaviour and ultimate load of RC beam. The corrosion induced damage to the reinforcement is represented in the finite element model by modifying its mechanical properties based on the results reported in the literature. The resultant load versus displacement curves of reinforced concrete beams are obtained. Good correlation is observed between the finite element analysis results and that obtained from experimental investigation on the control beam. The experimental results are also compared with the finite element analysis results for RC beams with corroded reinforcement. In order to understand the effect of corrosion on the mechanical properties of reinforcement, the corroded reinforcements are modelled in nonlinear finite element analysis by (i) reducing the area of reinforcement alone (ii) by reducing both area and mechanical properties and (iii) reducing the mechanical properties without reducing the area of steel as reported in literature. The results obtained for the beam with corroded reinforcement confirms reduction in yield stress and ultimate stress of the reinforcement steel.

Penile prosthesis implantation compares favorably in malpractice outcomes to other common urological procedures: findings from a malpractice insurance database.

PubMed

Chason, Juddson; Sausville, Justin; Kramer, Andrew C

2009-08-01

Some urologists choose not to offer penile prostheses because of concern over malpractice liability. The aim of this study was to assess whether urologists performing penile prosthesis surgery are placed at a greater malpractice risk. Percentage of malpractice suits from prosthesis surgery and other urological procedures that result in payment, average resulting payout from these cases, and category of legal issue that ultimately resulted in payout. A database from the Physician Insurers Association of America, an association of malpractice insurance companies covering physicians in North America, was analyzed to quantitatively compare penile implant surgery to other urological procedures in medicolegal terms. Compared to other common urological procedures, penile implant is comparable and on the lower end of the spectrum in terms of both the percentage of malpractice suits that result in payment and the amount ultimately paid in indemnity from those cases. Additionally, issues of informed consent play the largest role in indemnities for all urological procedures, whereas surgical technique is the most important issue for prosthesis surgery. Urologists who are adequately trained in prosthetic surgery should not avoid penile implant procedures for fear of malpractice suits. A focus on communication and informed consent can greatly reduce malpractice risk for urological procedures.

49 Stories That Make an Ultimate STEM Lesson Plan

ERIC Educational Resources Information Center

Mehta, Swati; Mehta, Rohit; Berzina-Pitcher, Inese; Seals, Christopher; Mishra, Punya

2016-01-01

In this paper we reviewed what 49 large urban public school district STEM teachers enrolled in a year-long graduate certificate and fellowship program at a large Midwestern university considered as their amazing teaching moments. They were asked to share their amazing teaching moments that would make an Ultimate Lesson Plan in STEM. In smaller…

Ultimate Gradient Limitation in Niobium Superconducting Accelerating Cavities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Checchin, Mattia; Grassellino, Anna; Martinello, Martina

2016-06-01

The present study is addressed to the theoretical description of the ultimate gradient limitation in SRF cavities. Our intent is to exploit experimental data to confirm models which provide feed-backs on how to improve the current state-of-art. New theoretical insight on the cavities limiting factor can be suitable to improve the quench field of N-doped cavities, and therefore to take advantage of high Q 0 at high gradients.

Comparison of two procedures for predicting rocket engine nozzle performance

NASA Technical Reports Server (NTRS)

Davidian, Kenneth J.

1987-01-01

Two nozzle performance prediction procedures which are based on the standardized JANNAF methodology are presented and compared for four rocket engine nozzles. The first procedure required operator intercedence to transfer data between the individual performance programs. The second procedure is more automated in that all necessary programs are collected into a single computer code, thereby eliminating the need for data reformatting. Results from both procedures show similar trends but quantitative differences. Agreement was best in the predictions of specific impulse and local skin friction coefficient. Other compared quantities include characteristic velocity, thrust coefficient, thrust decrement, boundary layer displacement thickness, momentum thickness, and heat loss rate to the wall. Effects of wall temperature profile used as an input to the programs was investigated by running three wall temperature profiles. It was found that this change greatly affected the boundary layer displacement thickness and heat loss to the wall. The other quantities, however, were not drastically affected by the wall temperature profile change.

Perspectives on rapid elimination and ultimate global eradication of paralytic poliomyelitis caused by polioviruses.

PubMed

Sabin, A B

1991-03-01

Poliomyelitis caused by polioviruses has already been eradicated from industrialized countries of North America, Europe, Asia and Oceania, but the procedures by which this eradication was achieved are not adequate for the poor tropical and subtropical countries. The major challenge now is first to eliminate it rapidly from Asia and Africa where an estimated 250,000 cases and 25,000 deaths currently occur annually. The great progress toward eradication of "wild" polioviruses from poor tropical and subtropical countries in Latin America was achieved not by the procedures still recommended by the WHO Expanded Program on Immunization (EPI) but by the independently organized annual, national days of antipolio vaccination - all based on the use of large armies of well-trained non-professional, community volunteers - first used in Cuba (1962), Brazil (1980), Nicaragua (1981), Dominican Republic (1983), Paraguay (1985), and Mexico (1986). This novel approach, described in some detail in this communication, is recommended for the rapid elimination of wild polioviruses from Asia and Africa, and for ultimate global eradication with the help of a special cadre within the EPI of WHO. The extensive use by the Pan American Health Organization (PAHO) of highly sophisticated regional virus laboratories has led to the recognition that, in areas from which poliomyelitis caused by polioviruses has been largely eliminated, there are thousands of cases of acute flaccid paralysis, previously clinically diagnosed as "probable poliomyelitis", that have no viral etiology, a phenomenon previously reported by Dr. Manuel Ramos Alvarez in Mexico City in 1967.

A Comparison of Coverage Restrictions for Biopharmaceuticals and Medical Procedures.

PubMed

Chambers, James; Pope, Elle; Bungay, Kathy; Cohen, Joshua; Ciarametaro, Michael; Dubois, Robert; Neumann, Peter J

2018-04-01

Differences in payer evaluation and coverage of pharmaceuticals and medical procedures suggest that coverage may differ for medications and procedures independent of their clinical benefit. We hypothesized that coverage for medications is more restricted than corresponding coverage for nonmedication interventions. We included top-selling medications and highly utilized procedures. For each intervention-indication pair, we classified value in terms of cost-effectiveness (incremental cost per quality-adjusted life-year), as reported by the Tufts Medical Center Cost-Effectiveness Analysis Registry. For each intervention-indication pair and for each of 10 large payers, we classified coverage, when available, as either "more restrictive" or as "not more restrictive," compared with a benchmark. The benchmark reflected the US Food and Drug Administration label information, when available, or pertinent clinical guidelines. We compared coverage policies and the benchmark in terms of step edits and clinical restrictions. Finally, we regressed coverage restrictiveness against intervention type (medication or nonmedication), controlling for value (cost-effectiveness more or less favorable than a designated threshold). We identified 392 medication and 185 procedure coverage decisions. A total of 26.3% of the medication coverage and 38.4% of the procedure coverage decisions were more restrictive than their corresponding benchmarks. After controlling for value, the odds of being more restrictive were 42% lower for medications than for procedures. Including unfavorable tier placement in the definition of "more restrictive" greatly increased the proportion of medication coverage decisions classified as "more restrictive" and reversed our findings. Therapy access depends on factors other than cost and clinical benefit, suggesting potential health care system inefficiency. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by

Analysis of plant gums and saccharide materials in paint samples: comparison of GC-MS analytical procedures and databases

PubMed Central

2012-01-01

Background Saccharide materials have been used for centuries as binding media, to paint, write and illuminate manuscripts and to apply metallic leaf decorations. Although the technical literature often reports on the use of plant gums as binders, actually several other saccharide materials can be encountered in paint samples, not only as major binders, but also as additives. In the literature, there are a variety of analytical procedures that utilize GC-MS to characterize saccharide materials in paint samples, however the chromatographic profiles are often extremely different and it is impossible to compare them and reliably identify the paint binder. Results This paper presents a comparison between two different analytical procedures based on GC-MS for the analysis of saccharide materials in works-of-art. The research presented here evaluates the influence of the analytical procedure used, and how it impacts the sugar profiles obtained from the analysis of paint samples that contain saccharide materials. The procedures have been developed, optimised and systematically used to characterise plant gums at the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). The main steps of the analytical procedures and their optimisation are discussed. Conclusions The results presented highlight that the two methods give comparable sugar profiles, whether the samples analysed are simple raw materials, pigmented and unpigmented paint replicas, or paint samples collected from hundreds of centuries old polychrome art objects. A common database of sugar profiles of reference materials commonly found in paint samples was thus compiled. The database presents data also from those materials that only contain a minor saccharide fraction. This database highlights how many sources of saccharides can be found in a paint sample, representing an important step forward in the problem of

Analysis of plant gums and saccharide materials in paint samples: comparison of GC-MS analytical procedures and databases.

PubMed

Lluveras-Tenorio, Anna; Mazurek, Joy; Restivo, Annalaura; Colombini, Maria Perla; Bonaduce, Ilaria

2012-10-10

Saccharide materials have been used for centuries as binding media, to paint, write and illuminate manuscripts and to apply metallic leaf decorations. Although the technical literature often reports on the use of plant gums as binders, actually several other saccharide materials can be encountered in paint samples, not only as major binders, but also as additives. In the literature, there are a variety of analytical procedures that utilize GC-MS to characterize saccharide materials in paint samples, however the chromatographic profiles are often extremely different and it is impossible to compare them and reliably identify the paint binder. This paper presents a comparison between two different analytical procedures based on GC-MS for the analysis of saccharide materials in works-of-art. The research presented here evaluates the influence of the analytical procedure used, and how it impacts the sugar profiles obtained from the analysis of paint samples that contain saccharide materials. The procedures have been developed, optimised and systematically used to characterise plant gums at the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). The main steps of the analytical procedures and their optimisation are discussed. The results presented highlight that the two methods give comparable sugar profiles, whether the samples analysed are simple raw materials, pigmented and unpigmented paint replicas, or paint samples collected from hundreds of centuries old polychrome art objects. A common database of sugar profiles of reference materials commonly found in paint samples was thus compiled. The database presents data also from those materials that only contain a minor saccharide fraction. This database highlights how many sources of saccharides can be found in a paint sample, representing an important step forward in the problem of identifying polysaccharide binders in

A Comparison of Intraverbal Training Procedures for Children with Autism

ERIC Educational Resources Information Center

Kodak, Tiffany; Fuchtman, Rashea; Paden, Amber

2012-01-01

We compared the effectiveness of three training procedures, echoic and tact prompting plus error correction and a cues-pause-point (CPP) procedure, for increasing intraverbals in 2 children with autism. We also measured echoic behavior that may have interfered with appropriate question answering. Results indicated that echoic prompting with error…

Multiple proximate and ultimate causes of natal dispersal in white-tailed deer

USGS Publications Warehouse

Long, E.S.; Diefenbach, D.R.; Rosenberry, C.S.; Wallingford, B.D.

2008-01-01

Proximate and ultimate causes of dispersal in vertebrates vary, and relative importance of these causes is poorly understood. Among populations, inter- and intrasexual social cues for dispersal are thought to reduce inbreeding and local mate competition, respectively, and specific emigration cue may affect dispersal distance, such that inbreeding avoidance dispersal tends to be farther than dispersal to reduce local competition. To investigate potential occurrence of multiple proximate and ultimate causes of dispersal within populations, we radio-marked 363 juvenile male white-tailed deer (Odocoileus virginianus) in 2 study areas in Pennsylvania. Natal dispersal probability and distance were monitored over a 3-year period when large-scale management changes reduced density of adult females and increased density of adult males. Most dispersal (95-97%) occurred during two 12-week periods: spring, when yearling males still closely associate with related females, and prior to fall breeding season, when yearling males closely associate with other breeding-age males. Following changes to sex and age structure that reduced potential for inbreeding and increased potential for mate competition, annual dispersal probability did not change; however, probability of spring dispersal decreased, whereas probability of fall dispersal increased. Spring dispersal distances were greater than fall dispersal distances, suggesting that adaptive inbreeding avoidance dispersal requires greater distance than mate competition dispersal where opposite-sex relatives are philopatric and populations are not patchily distributed. Both inbreeding avoidance and mate competition are important ultimate causes of dispersal of white-tailed deer, but ultimate motivations for dispersal are proximately cued by different social mechanisms and elicit different responses in dispersers.

Comparison of extraction induced by emulsion breaking, ultrasonic extraction and wet digestion procedures for determination of metals in edible oil samples in Turkey using ICP-OES.

PubMed

Bakircioglu, Dilek; Kurtulus, Yasemin Bakircioglu; Yurtsever, Selcuk

2013-06-01

The content of elements (Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) in edible oils (sunflower, hazelnut, canola, corn and olive oils) from Turkey was determined using inductively coupled plasma optical emission spectrometry (ICP-OES) after ultrasonic extraction, wet digestion, and extraction induced by emulsion breaking procedures (EIEB). In order to evaluate the best sample preparation procedure, EIEB procedure was compared by ultrasonic extraction and wet digestion procedures. The results in the samples (minimum-maximum in mgkg(-1)) were : 0.022-0.058, Cr 0.126-7.106, Cu 0.570-4.504, Fe 8.004-12.588, Mn 0.035-0.054, Ni 0.908-2.182, Pb 0.099-0.134 and Zn 2.206-8.982. The EIEB procedure was found to be fast, reliable, simple, and excellent in comparison with the other studied procedures. The recovery test was performed by spiking the samples with known amounts of the metals in the form of organometallic standards and applying the EIEB procedure. The recoveries were in the range of 96-109%. Copyright © 2012 Elsevier Ltd. All rights reserved.

Getting “Just Deserts” or Seeing the “Silver Lining”: The Relation between Judgments of Immanent and Ultimate Justice

PubMed Central

Harvey, Annelie J.; Callan, Mitchell J.

2014-01-01

People can perceive misfortunes as caused by previous bad deeds (immanent justice reasoning) or resulting in ultimate compensation (ultimate justice reasoning). Across two studies, we investigated the relation between these types of justice reasoning and identified the processes (perceptions of deservingness) that underlie them for both others (Study 1) and the self (Study 2). Study 1 demonstrated that observers engaged in more ultimate (vs. immanent) justice reasoning for a “good” victim and greater immanent (vs. ultimate) justice reasoning for a “bad” victim. In Study 2, participants' construals of their bad breaks varied as a function of their self-worth, with greater ultimate (immanent) justice reasoning for participants with higher (lower) self-esteem. Across both studies, perceived deservingness of bad breaks or perceived deservingness of ultimate compensation mediated immanent and ultimate justice reasoning respectively. PMID:25036011

Comparison of VFA titration procedures used for monitoring the biogas process.

PubMed

Lützhøft, Hans-Christian Holten; Boe, Kanokwan; Fang, Cheng; Angelidaki, Irini

2014-05-01

Titrimetric determination of volatile fatty acids (VFAs) contents is a common way to monitor a biogas process. However, digested manure from co-digestion biogas plants has a complex matrix with high concentrations of interfering components, resulting in varying results when using different titration procedures. Currently, no standardized procedure is used and it is therefore difficult to compare the performance among plants. The aim of this study was to evaluate four titration procedures (for determination of VFA-levels of digested manure samples) and compare results with gas chromatographic (GC) analysis. Two of the procedures are commonly used in biogas plants and two are discussed in literature. The results showed that the optimal titration results were obtained when 40 mL of four times diluted digested manure was gently stirred (200 rpm). Results from samples with different VFA concentrations (1-11 g/L) showed linear correlation between titration results and GC measurements. However, determination of VFA by titration generally overestimated the VFA contents compared with GC measurements when samples had low VFA concentrations, i.e. around 1 g/L. The accuracy of titration increased when samples had high VFA concentrations, i.e. around 5 g/L. It was further found that the studied ionisable interfering components had lowest effect on titration when the sample had high VFA concentration. In contrast, bicarbonate, phosphate and lactate had significant effect on titration accuracy at low VFA concentration. An extended 5-point titration procedure with pH correction was best to handle interferences from bicarbonate, phosphate and lactate at low VFA concentrations. Contrary, the simplest titration procedure with only two pH end-points showed the highest accuracy among all titration procedures at high VFA concentrations. All in all, if the composition of the digested manure sample is not known, the procedure with only two pH end-points should be the procedure of

Transcending matter: physics and ultimate meaning.

PubMed

Paulson, Steve; Frank, Adam; Kaiser, David; Maudlin, Tim; Natarajan, Priyamvada

2015-12-01

From the discovery of new galaxies and nearly undetectable dark energy to the quantum entanglement of particles across the universe, new findings in physics naturally elicit a sense of awe and wonder. For the founders of modern physics-from Einstein and Bohr to Heisenberg, Pauli, and Bohm-a fascination with deeper questions of meaning and ultimate reality led some of them to explore esoteric traditions and metaphysics. More recently, however, physicists have largely shunned such philosophical and spiritual associations. What can contemporary physics offer us in the quest to understand our place in the universe? Has physics in some ways become a religion unto itself that rejects the search for existential meaning? Discussion of these and related questions is presented in this paper. © 2015 New York Academy of Sciences.

37. ALTERNATE DESIGN, SIMILAR TO THAT ULTIMATELY SELECTED, BUT USING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. ALTERNATE DESIGN, SIMILAR TO THAT ULTIMATELY SELECTED, BUT USING STEPPED TOWERS, AND WITH PYLONS CAPPED BY LANTERNS Pen-and-ink drawing by project architect Alfred Eichler, ca. 1934. - Sacramento River Bridge, Spanning Sacramento River at California State Highway 275, Sacramento, Sacramento County, CA

Comparison of two cell lysis procedures for recovery of microcystins in water samples from silver lake in Dover, Delaware, with microcystin producing cyanobacterial accumulations

USGS Publications Warehouse

Loftin, Keith A.; Meyer, Michael T.; Rubio, Fernando; Kamp, Lisa; Humphries, Edythe; Whereat, Ed

2008-01-01

A collaboration was developed between Abraxis, LLC, the State of Delaware Department of Natural Resources and Environmental Control Division of Water Resources Environmental Laboratory, the University of Delaware, and the United States Geological Survey to investigate the efficacy of the QuikLyse procedure developed by Abraxis, LLC as an alternative cell-lysis technique suitable for use with an existing liquid chromatography/tandem mass spectrometry research method developed at the United States Geological Survey Organic Geochemistry Research Laboratory to analyze cyanotoxins. A comparison of three sequential freeze/thaw cycles versus QuikLyse, a proprietary chemical lysis procedure was conducted on four water samples collected from Silver Lake in Dover, Delaware. Results from the Abraxis Microcystins-DM enzyme-linked immunosorbent assay and liquid chromatography/tandem mass spectrometry were tabulated as a function of the cell lysis technique. Stastical comparison of percent relative standard deviations showed no significant difference (alpha = 0.05) between both cell-lysis techniques when measured by enzyme-linked immunosorbent assay or liquid chromatography/tandem mass spectrometry for three of the four samples.

SU-G-206-05: A Comparison of Head Phantoms Used for Dose Determination in Imaging Procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiong, Z; Vijayan, S; Kilian-Meneghin, J

Purpose: To determine similarities and differences between various head phantoms that might be used for dose measurements in diagnostic imaging procedures. Methods: We chose four frequently used anthropomorphic head phantoms (SK-150, PBU-50, RS-240T and Alderson Rando), a computational patient phantom (Zubal) and the CTDI head phantom for comparison in our study. We did a CT scan of the head phantoms using the same protocol and compared their dimensions and CT numbers. The scan data was used to calculate dose values for each of the phantoms using EGSnrc Monte Carlo software. An .egsphant file was constructed to describe these phantoms usingmore » a Visual C++ program for DOSXYZnrc/EGSnrc simulation. The lens dose was calculated for a simulated CBCT scan using DOSXYZnrc/EGSnrc and the calculated doses were validated with measurements using Gafchromic film and an ionization chamber. Similar calculations and measurements were made for PA radiography to investigate the attenuation and backscatter differences between these phantoms. We used the Zubal phantom as the standard for comparison since it was developed based on a CT scan of a patient. Results: The lens dose for the Alderson Rando phantom is around 9% different than the Zubal phantom, while the lens dose for the PBU-50 phantom was about 50% higher, possibly because its skull thickness and the density of bone and soft tissue are lower than anthropometric values. The lens dose for the CTDI phantom is about 500% higher because of its totally different structure. The entrance dose profiles are similar for the five anthropomorphic phantoms, while that for the CTDI phantom was distinctly different. Conclusion: The CTDI and PBU-50 head phantoms have substantially larger lens dose estimates in CBCT. The other four head phantoms have similar entrance dose with backscatter hence should be preferred for dose measurement in imaging procedures of the head. Partial support from NIH Grant R01-EB002873 and Toshiba Medical

Stress distribution difference between Lava Ultimate full crowns and IPS e.max CAD full crowns on a natural tooth and on tooth-shaped implant abutments.

PubMed

Krejci, Ivo; Daher, René

2017-04-01

The goal of this short communication is to present finite element analysis comparison of the stress distribution between CAD/CAM full crowns made of Lava Ultimate and of IPS e.max CAD, adhesively luted to natural teeth and to implant abutments with the shape of natural teeth. Six 3D models were prepared using a 3D content-creating software, based on a micro-CT scan of a human mandibular molar. The geometry of the full crown and of the abutment was the same for all models representing Lava Ultimate full crowns (L) and IPS e.max CAD full crowns (E) on three different abutments: prepared natural tooth (n), titanium abutment (t) and zirconia abutment (z). A static load of 400 N was applied on the vestibular and lingual cusps, and fixtures were applied to the base of the models. After running the static linear analysis, the post-processing data we analyzed. The stress values at the interface between the crown and the abutment of the Lt and Lz groups were significantly higher than the stress values at the same interface of all the other models. The high stress concentration in the adhesive at the interface between the crown and the abutment of the Lava Ultimate group on implants might be one of the factors contributing to the reported debondings of crowns.

Towards the definition of Institutional diagnostic reference levels in paediatric interventional cardiology procedures in Greece.

PubMed

Kottou, S; Kollaros, N; Plemmenos, C; Mastorakou, I; Apostolopoulou, S C; Tsapaki, V

2018-02-01

This study aimed to evaluate paediatric radiation doses in a dedicated cardiology hospital, with the objective of characterising patterns in dose variation. The ultimate purpose was to define Local (Institutional) Diagnostic Reference Levels (LDRLs) for different types of paediatric cardiac interventional procedures (IC), according to patient age. From a total of 710 cases performed during three consecutive years, by operators with more than 15 years of experience, the age was noted in only 477 IC procedures. The median values obtained for Fluoroscopy Time (FT), Number of Frames (N) and Kerma Area Product (P KA ) by age range were 5.8 min, 1322 and 2.0 Gy.cm 2 for <1 y; 6.5 min, 1403 and 3.0 Gy.cm 2 for 1 to <5 y; 5.9 min, 950 and 7.0 Gy.cm 2 for 5 to <10 y; 5.7 min, 940 and 14.0 Gy.cm 2 for 10 to <16 y, respectively. A large range of patient dose data is observed, depending greatly on procedure type and patient age. In all age groups the range of median FT, N and P KA values was 3.1-15.8 min, 579-1779 and 1.0-20.8 Gy.cm 2 respectively. Consequently, the definition of LDRLs presents challenges mainly due to the multiple clinical and technical factors affecting the outcome. On the other hand the lack of paediatric IC DRLs makes the identification of good practices more difficult. A consensus is needed on IC procedures nomenclature and grouping in order to allow a common assessment and comparison of doses. Copyright © 2018 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Ultimate explanations and suboptimal choice.

PubMed

Vasconcelos, Marco; Machado, Armando; Pandeirada, Josefa N S

2018-07-01

Researchers have unraveled multiple cases in which behavior deviates from rationality principles. We propose that such deviations are valuable tools to understand the adaptive significance of the underpinning mechanisms. To illustrate, we discuss in detail an experimental protocol in which animals systematically incur substantial foraging losses by preferring a lean but informative option over a rich but non-informative one. To understand how adaptive mechanisms may fail to maximize food intake, we review a model inspired by optimal foraging principles that reconciles sub-optimal choice with the view that current behavioral mechanisms were pruned by the optimizing action of natural selection. To move beyond retrospective speculation, we then review critical tests of the model, regarding both its assumptions and its (sometimes counterintuitive) predictions, all of which have been upheld. The overall contention is that (a) known mechanisms can be used to develop better ultimate accounts and that (b) to understand why mechanisms that generate suboptimal behavior evolved, we need to consider their adaptive value in the animal's characteristic ecology. Copyright © 2018 Elsevier B.V. All rights reserved.

A comparison of unsupervised classification procedures on LANDSAT MSS data for an area of complex surface conditions in Basilicata, Southern Italy

NASA Technical Reports Server (NTRS)

Justice, C.; Townshend, J. (Principal Investigator)

1981-01-01

Two unsupervised classification procedures were applied to ratioed and unratioed LANDSAT multispectral scanner data of an area of spatially complex vegetation and terrain. An objective accuracy assessment was undertaken on each classification and comparison was made of the classification accuracies. The two unsupervised procedures use the same clustering algorithm. By on procedure the entire area is clustered and by the other a representative sample of the area is clustered and the resulting statistics are extrapolated to the remaining area using a maximum likelihood classifier. Explanation is given of the major steps in the classification procedures including image preprocessing; classification; interpretation of cluster classes; and accuracy assessment. Of the four classifications undertaken, the monocluster block approach on the unratioed data gave the highest accuracy of 80% for five coarse cover classes. This accuracy was increased to 84% by applying a 3 x 3 contextual filter to the classified image. A detailed description and partial explanation is provided for the major misclassification. The classification of the unratioed data produced higher percentage accuracies than for the ratioed data and the monocluster block approach gave higher accuracies than clustering the entire area. The moncluster block approach was additionally the most economical in terms of computing time.

Comparison of Efficacy and Satisfaction between the TVT-SECUR® and MONARC® Procedures for the Treatment of Female Stress Urinary Incontinence

PubMed Central

Jeong, Moo Youl; Kim, Su Jin; Kim, Hyo Sin; Koh, Jun Sung

2010-01-01

Purpose The tension-free vaginal tape SECUR® (TVT-S) is a new, minimally invasive sling procedure for treating female stress urinary incontinence (SUI). However, results of comparisons of the TVT-S with the transobturator tape (TOT) sling are lacking. Therefore, we investigated outcome and satisfaction of the TVT-S procedure compared with the TOT procedure. Materials and Methods We included 64 patients with SUI who underwent the TVT-S (n=31) or TOT (MONARC®, n=33) procedure and were followed up for more than 1 year. The preoperative evaluation included history taking, pelvic examination, consecutive 3-day voiding diary, and urodynamic study including Valsalva leak point pressure. Postoperatively, continence status and subjective patient satisfaction were evaluated. Cure was defined as the absence of any episodes of involuntary urine leakage during stressful activities and a stress cough test. Results The TVT-S group (71.0%) showed a slightly lower cure rate than did the MONARC group (84.8%); however, there was no significant difference between the 2 groups (p=0.179). Nine of the patients who underwent the TVT-S showed incontinence postoperatively. Among them, the H approach was used in 7 patients and the U approach was done in 2 patients. Following TVT-S and MONARC, the patients' reported satisfaction was 80.6% and 78.8%, respectively. Patient satisfaction did not differ significantly between the two groups (p=0.854). Conclusions Our results showed that the TVT-S and MONARC procedures may be comparable in terms of cure rate and patient satisfaction after more than 1 year of follow-up. PMID:21165197

Comparison of Efficacy and Satisfaction between the TVT-SECUR® and MONARC® Procedures for the Treatment of Female Stress Urinary Incontinence.

PubMed

Jeong, Moo Youl; Kim, Su Jin; Kim, Hyo Sin; Koh, Jun Sung; Kim, Joon Chul

2010-11-01

The tension-free vaginal tape SECUR® (TVT-S) is a new, minimally invasive sling procedure for treating female stress urinary incontinence (SUI). However, results of comparisons of the TVT-S with the transobturator tape (TOT) sling are lacking. Therefore, we investigated outcome and satisfaction of the TVT-S procedure compared with the TOT procedure. We included 64 patients with SUI who underwent the TVT-S (n=31) or TOT (MONARC®, n=33) procedure and were followed up for more than 1 year. The preoperative evaluation included history taking, pelvic examination, consecutive 3-day voiding diary, and urodynamic study including Valsalva leak point pressure. Postoperatively, continence status and subjective patient satisfaction were evaluated. Cure was defined as the absence of any episodes of involuntary urine leakage during stressful activities and a stress cough test. The TVT-S group (71.0%) showed a slightly lower cure rate than did the MONARC group (84.8%); however, there was no significant difference between the 2 groups (p=0.179). Nine of the patients who underwent the TVT-S showed incontinence postoperatively. Among them, the H approach was used in 7 patients and the U approach was done in 2 patients. Following TVT-S and MONARC, the patients' reported satisfaction was 80.6% and 78.8%, respectively. Patient satisfaction did not differ significantly between the two groups (p=0.854). Our results showed that the TVT-S and MONARC procedures may be comparable in terms of cure rate and patient satisfaction after more than 1 year of follow-up.

Improving L2 Reading Comprehension through Emotionalized Dynamic Assessment Procedures.

PubMed

Abdolrezapour, Parisa

2017-06-01

The paper reports a study on an emotionally-loaded dynamic assessment procedure used with Iranian EFL learners. It focuses on the effect of using emotional intelligence characteristics (based on Goleman's framework) as a tool for motivating learners while performing reading tasks. The study with 50 intermediate learners aged 12-15 used three modalities: a control group, which was taught under institute's normal procedures; a comparison group, which received dynamic assessment (DA); and an experimental group, which received emotionalized dynamic assessment (EDA) procedures, in the form of an intervention focusing on characteristics of Goleman's emotional intelligence framework with the express purpose of inducing them to work with their emotions. Results showed that applying EDA procedures to reading assessment tasks made a difference in learners' level of performance in comparison to those who went through pure DA procedures who in turn performed significantly better than those who did not received DA in any form.

A Comparison of Three Covert Assertion Training Procedures.

ERIC Educational Resources Information Center

Twentyman, Craig T.; And Others

1980-01-01

Assessed the effectiveness of covert modification procedures in an assertion training program. All treatment groups were superior to the control in behavioral ratings of assertiveness during the posttest in those situations that had been employed previously in treatment; two were superior in those that had not been used, providing evidence of…

Adjudicating pathological criminal incapacity within a climate of ultimate issue barriers: a comparative perspective.

PubMed

Stevens, Geert Philip

2015-01-01

Mental health experts are increasingly being utilised by the criminal justice system to provide assistance to courts during the assessment of issues falling beyond the knowledge and/or experience of the courts. A particular domain where the assistance of qualified psychiatrists and psychologists is becoming essential is where the defence of pathological criminal incapacity falls to be assessed. Mental health professionals testifying during trials where the defence of pathological criminal incapacity is raised will present opinion evidence which is one of the exceptions to the rule of inadmissibility of opinion evidence. Mental health professionals providing their opinion evidence are, however, prohibited from expressing opinions on so-called "ultimate issues" upon which only the court may ultimately rule upon. The latter rule is also commonly known in practice as the "ultimate issue" rule which presents multifaceted challenges in respect of the application of the defence of pathological criminal incapacity. In this article, the author assesses the application of the ultimate issue rule with reference to the defence of pathological criminal incapacity as it operates within the South African criminal law context. A comparative analysis is also provided with reference to the rule as it operates in the United States of America and more specifically Federal Rule 704. It is concluded that the ultimate issue rule unnecessarily restricts testimony provided by mental health professionals as such placing a barrier on such evidence. As such, it is argued that the rule is superfluous as it remains within the discretion of the trier of fact to decide as to what weight to attach to such evidence. Copyright © 2015. Published by Elsevier Ltd.

The Ultimate Challenge: Prove B. F. Skinner Wrong

PubMed Central

Chance, Paul

2007-01-01

For much of his career, B. F. Skinner displayed the optimism that is often attributed to behaviorists. With time, however, he became less and less sanguine about the power of behavior science to solve the major problems facing humanity. Near the end of his life he concluded that a fair consideration of principles revealed by the scientific analysis of behavior leads to pessimism about our species. In this article I discuss the case for Skinner's pessimism and suggest that the ultimate challenge for behavior analysts today is to prove Skinner wrong. PMID:22478494

The utility and cost of routine follow-up procedures in the surveillance of ovarian and primary peritoneal carcinoma: a 16-year institutional review.

PubMed

Rettenmaier, N B; Rettenmaier, C R; Wojciechowski, T; Abaid, L N; Brown, J V; Micha, J P; Goldstein, B H

2010-11-23

The purpose of this study was to evaluate the number of ovarian cancer and primary peritoneal cancer (PPC) progressive disease cases identified via routine follow-up procedures and the corresponding cost throughout a 16-year period at a single medical institution. Previously undiagnosed epithelial ovarian (n=241), PPC (n=23), and concurrent ovarian and uterine (n=24) cancer patients were treated and then followed via CA-125, imaging (e.g., CT scan, chest X-ray), physical examination and vaginal cytology. In the group of 287 patients, there were 151 cases of disease progression. Serial imaging detected the highest number of progressive disease cases (66 initial and 45 confirmatory diagnoses), but the cost was rather high ($13,454 per patient recurrence), whereas CA-125 testing (74 initial and 20 corroborative diagnoses) was the least expensive ($3,924) per recurrent diagnosis. The total cost of surveillance during the 16-year period was nearly $2,400,000. Ultimately, serial imaging and the CA-125 assay detected the highest number of ovarian cancer and PCC progressive disease cases in comparison to physical examination and vaginal cytology, but nevertheless, all of the procedures were conducted at a considerable financial expense.

Why are men interested in cosmetic surgery procedures? Examining the role of different forms of peer influence, social comparison, internalization, and body dissatisfaction.

PubMed

Matera, Camilla; Nerini, Amanda; Stefanile, Cristina

2018-06-16

The present research examined the roles of different forms of peer influence, internalization, social comparison, and body dissatisfaction in men's interest in cosmetic surgery. Participants were 204 Italian men (M age  = 34.02, SD = 11.21). Regression analyses showed that appearance conversations with friends and peer attribution were associated with consideration of cosmetic surgery for social reasons, while teasing on muscularity (but not teasing on general body and shape) was linked to interest in cosmetic surgery for intrapersonal motives. Social comparison was significantly and positively associated with men's interest in cosmetic surgery, while internalization was not. Dissatisfaction with body fat was linked to men's consideration of cosmetic surgery for social motivations, while muscularity and height dissatisfaction did not emerge as significant correlates of cosmetic surgery attitudes. These findings highlight the importance of psychosocial factors, such as peer influence, body fat dissatisfaction, and social comparison in men's interest in cosmetic procedures. Copyright © 2018 Elsevier Ltd. All rights reserved.

Transition to the Ultimate Regime in Two-Dimensional Rayleigh-Bénard Convection

NASA Astrophysics Data System (ADS)

Zhu, Xiaojue; Mathai, Varghese; Stevens, Richard J. A. M.; Verzicco, Roberto; Lohse, Detlef

2018-04-01

The possible transition to the so-called ultimate regime, wherein both the bulk and the boundary layers are turbulent, has been an outstanding issue in thermal convection, since the seminal work by Kraichnan [Phys. Fluids 5, 1374 (1962), 10.1063/1.1706533]. Yet, when this transition takes place and how the local flow induces it is not fully understood. Here, by performing two-dimensional simulations of Rayleigh-Bénard turbulence covering six decades in Rayleigh number Ra up to 1 014 for Prandtl number Pr =1 , for the first time in numerical simulations we find the transition to the ultimate regime, namely, at Ra*=1013 . We reveal how the emission of thermal plumes enhances the global heat transport, leading to a steeper increase of the Nusselt number than the classical Malkus scaling Nu ˜Ra1 /3 [Proc. R. Soc. A 225, 196 (1954), 10.1098/rspa.1954.0197]. Beyond the transition, the mean velocity profiles are logarithmic throughout, indicating turbulent boundary layers. In contrast, the temperature profiles are only locally logarithmic, namely, within the regions where plumes are emitted, and where the local Nusselt number has an effective scaling Nu ˜Ra0.38 , corresponding to the effective scaling in the ultimate regime.

Ultimate Success Rates on National Board Examinations: A Research Brief.

ERIC Educational Resources Information Center

Gross, Leon J.; Wallis, Norman E.; Present, Richard K.

1999-01-01

A study investigated the percentage of optometry students successfully completing the four-component National Board of Examiners in Optometry examination at graduation between 1995 to 1997. Ultimate pass rates for all four components ranged from 87.0% to 90.9%. Results are discussed in relation to the 1993 test-sequence expansion and to the number…

Failure mode and effects analysis: an empirical comparison of failure mode scoring procedures.

PubMed

Ashley, Laura; Armitage, Gerry

2010-12-01

To empirically compare 2 different commonly used failure mode and effects analysis (FMEA) scoring procedures with respect to their resultant failure mode scores and prioritization: a mathematical procedure, where scores are assigned independently by FMEA team members and averaged, and a consensus procedure, where scores are agreed on by the FMEA team via discussion. A multidisciplinary team undertook a Healthcare FMEA of chemotherapy administration. This included mapping the chemotherapy process, identifying and scoring failure modes (potential errors) for each process step, and generating remedial strategies to counteract them. Failure modes were scored using both an independent mathematical procedure and a team consensus procedure. Almost three-fifths of the 30 failure modes generated were scored differently by the 2 procedures, and for just more than one-third of cases, the score discrepancy was substantial. Using the Healthcare FMEA prioritization cutoff score, almost twice as many failure modes were prioritized by the consensus procedure than by the mathematical procedure. This is the first study to empirically demonstrate that different FMEA scoring procedures can score and prioritize failure modes differently. It found considerable variability in individual team members' opinions on scores, which highlights the subjective and qualitative nature of failure mode scoring. A consensus scoring procedure may be most appropriate for FMEA as it allows variability in individuals' scores and rationales to become apparent and to be discussed and resolved by the team. It may also yield team learning and communication benefits unlikely to result from a mathematical procedure.

The transfer of analytical procedures.

PubMed

Ermer, J; Limberger, M; Lis, K; Wätzig, H

2013-11-01

Analytical method transfers are certainly among the most discussed topics in the GMP regulated sector. However, they are surprisingly little regulated in detail. General information is provided by USP, WHO, and ISPE in particular. Most recently, the EU emphasized the importance of analytical transfer by including it in their draft of the revised GMP Guideline. In this article, an overview and comparison of these guidelines is provided. The key to success for method transfers is the excellent communication between sending and receiving unit. In order to facilitate this communication, procedures, flow charts and checklists for responsibilities, success factors, transfer categories, the transfer plan and report, strategies in case of failed transfers, tables with acceptance limits are provided here, together with a comprehensive glossary. Potential pitfalls are described such that they can be avoided. In order to assure an efficient and sustainable transfer of analytical procedures, a practically relevant and scientifically sound evaluation with corresponding acceptance criteria is crucial. Various strategies and statistical tools such as significance tests, absolute acceptance criteria, and equivalence tests are thoroughly descibed and compared in detail giving examples. Significance tests should be avoided. The success criterion is not statistical significance, but rather analytical relevance. Depending on a risk assessment of the analytical procedure in question, statistical equivalence tests are recommended, because they include both, a practically relevant acceptance limit and a direct control of the statistical risks. However, for lower risk procedures, a simple comparison of the transfer performance parameters to absolute limits is also regarded as sufficient. Copyright © 2013 Elsevier B.V. All rights reserved.

An introduction to UGRS: the ultimate grading and remanufacturing system

Treesearch

John Moody; Charles J. Gatchell; Elizabeth S. Walker; Powsiri Klinkhachorn

1998-01-01

The Ultimate Grading and Remanufactming System (UGRS) is an advanced computer program for grading and remanufacturing lumber. It is an interactive program that will both grade lumber according to NHLA rules and remanufacture it for maximum value. UGRS is written to run under Microsoft Windows 3.0 or later updates and provides a sophisticated graphical user interface....

Ultimate biochemical oxygen demand in semi-intensively managed shrimp pond waters

USDA-ARS?s Scientific Manuscript database

Three independent studies were conducted to quantified ultimate biochemical oxygen demand (UBOD) and the corresponding decomposition rate constant for production pond (average 21.5 ha each) waters and effluents on six semi-intensively managed marine shrimp (Litopenaeus vannamei) farms in Honduras. S...

Applications of self-control procedures by children: a review.

PubMed Central

O'Leary, S G; Dubey, D R

1979-01-01

Self-control procedures as used by children to affect their own behavior were reviewed. Particular emphasis was placed on self-instruction, self-determined criteria, self-assessment, and self-reinforcement. Self-punishment, comprehensive programs, and innovative self-control procedures (distraction and restatement of contingencies) were also evaluated. Basic effectiveness, comparisons with similar externally imposed interventions, maintenance, and the augmental value of the procedures were assessed. Important problems for future research were identified. PMID:389917

Estimation of Ultimate Tensile Strength of dentin Using Finite Element Analysis from Endodontically Treated Tooth

NASA Astrophysics Data System (ADS)

Sinthaworn, S.; Puengpaiboon, U.; Warasetrattana, N.; Wanapaisarn, S.

2018-01-01

Endodontically treated teeth were simulated by finite element analysis in order to estimate ultimate tensile strength of dentin. Structures of the endodontically treated tooth cases are flared root canal, restored with different number of fiber posts {i.e. resin composite core without fiber post (group 1), fiber post No.3 with resin composite core (group 2) and fiber post No.3 accessory 2 fiber posts No.0 with resin composite core (group 3)}. Elastic modulus and Poisson’s ratio of materials were selected from literatures. The models were loaded by the average fracture resistances load of each groups (group 1: 361.80 N, group 2: 559.46 N, group 3: 468.48 N) at 135 degree angulation in respect to the longitudinal axis of the teeth. The stress analysis and experimental confirm that fracture zone is at dentin area. To estimate ultimate tensile strength of dentin, trial and error of ultimate tensile strength were tested to obtain factor of safety (FOS) equal to 1.00. The result reveals that ultimate tensile strength of dentin of group 1, 2, 3 are 38.89, 30.96, 37.19 MPa, respectively.

15 CFR Supplement No. 3 to Part 748 - BIS-711, Statement by Ultimate Consignee and Purchaser Instructions

Code of Federal Regulations, 2011 CFR

2011-01-01

... this form. Block 6: Ultimate Consignee. Enter the requested information and sign the statement in ink... must be signed in ink by the Purchaser, if the Purchaser is not the same as the Ultimate Consignee...

15 CFR Supplement No. 3 to Part 748 - BIS-711, Statement by Ultimate Consignee and Purchaser Instructions

Code of Federal Regulations, 2013 CFR

2013-01-01

... this form. Block 6: Ultimate Consignee. Enter the requested information and sign the statement in ink... must be signed in ink by the Purchaser, if the Purchaser is not the same as the Ultimate Consignee...

15 CFR Supplement No. 3 to Part 748 - BIS-711, Statement by Ultimate Consignee and Purchaser Instructions

Code of Federal Regulations, 2014 CFR

2014-01-01

... this form. Block 6: Ultimate Consignee. Enter the requested information and sign the statement in ink... must be signed in ink by the Purchaser, if the Purchaser is not the same as the Ultimate Consignee...

15 CFR Supplement No. 3 to Part 748 - BIS-711, Statement by Ultimate Consignee and Purchaser Instructions

Code of Federal Regulations, 2012 CFR

2012-01-01

... this form. Block 6: Ultimate Consignee. Enter the requested information and sign the statement in ink... must be signed in ink by the Purchaser, if the Purchaser is not the same as the Ultimate Consignee...

TVT and TVT-Obturator: comparison of two operative procedures.

PubMed

Neuman, Menahem

2007-03-01

To compare two anti-incontinence operations: the tension-free vaginal tape (TVT) and the TVT-Obturator for the first two 75-patient groups. One surgeon operated on two patient groups with urodynamically proven urinary stress incontinence. The first 75-patient group in 1998 included the first TVT procedures performed according to Ulmsten [Ulmsten U, Henriksson L, Johnson P, Varhos G. An ambulatory surgical procedure under local anesthesia for treatment of female urinary incontinence. Int Urogynecol J 1996;7:81-6]. Follow-up lasted for 5-6 years. The second 75-patient group in 2004 included the first TVT-Obturator operations performed according to [De Leval J. Novel surgical technique for the treatment of female stress urinary incontinence: transobturator vaginal tape inside-out. Eur. Urol. 2003;44:724-30]. Follow-up lasted for 6-13 months. The two patient groups were similar from the demographic and therapeutic points of view. The TVT-Obturator procedure required neither bladder catheterization nor intra-operative diagnostic cystoscopy. TVT-related bladder penetration (8.0%), post-operative voiding difficulties (5.0%), intra-operative bleeding (4.0%), post-operative field infection (2.7%), and post-operative pelvic floor relaxation (1.3%) were not noted with the TVT-Obturator. The early therapeutic failure rates were 2.7% for the TVT and 1.3% for the TVT-Obturator, and neither bowel nor urethral injuries were recorded. The surgeons' learning curves of these two minimally invasive surgical procedures for the treatment of female urinary stress incontinence are comparable. The safety and cost-effectiveness of the TVT are well-established. The TVT-Obturator, a novel mid-urethral sling, was designed to overcome some of the TVT-related operative complications. The TVT-Obturator patients seem to have less intra-operative and post-operative surgical complications than the TVT patients. However, long-term comparative data collection is required prior to drawing solid

Wall roughness induces asymptotic ultimate turbulence

NASA Astrophysics Data System (ADS)

Zhu, Xiaojue; Verschoof, Ruben A.; Bakhuis, Dennis; Huisman, Sander G.; Verzicco, Roberto; Sun, Chao; Lohse, Detlef

2018-04-01

Turbulence governs the transport of heat, mass and momentum on multiple scales. In real-world applications, wall-bounded turbulence typically involves surfaces that are rough; however, characterizing and understanding the effects of wall roughness on turbulence remains a challenge. Here, by combining extensive experiments and numerical simulations, we examine the paradigmatic Taylor-Couette system, which describes the closed flow between two independently rotating coaxial cylinders. We show how wall roughness greatly enhances the overall transport properties and the corresponding scaling exponents associated with wall-bounded turbulence. We reveal that if only one of the walls is rough, the bulk velocity is slaved to the rough side, due to the much stronger coupling to that wall by the detaching flow structures. If both walls are rough, the viscosity dependence is eliminated, giving rise to asymptotic ultimate turbulence—the upper limit of transport—the existence of which was predicted more than 50 years ago. In this limit, the scaling laws can be extrapolated to arbitrarily large Reynolds numbers.

The psychiatrist's guide to right and wrong: Part IV: The insanity defense and the Ultimate Issue Rule.

PubMed

Goldstein, R L

1989-01-01

In the wake of Hinckley, widespread public dissatisfaction with the role of psychiatrists in insanity defense litigation prompted Congress in 1984 to amend the Federal Rules of Evidence to prohibit psychiatric testimony on the ultimate legal issue of whether or not a defendant is insane. APA's Statement on the Insanity Defense served as the ably articulated premise for this evidentiary amendment. APA argued that in going beyond their psychiatric expertise by answering ultimate issue questions as to whether defendants are legally insane, experts are likely to confuse the jury and undermine public confidence in psychiatry. APA also asserted that there was an impermissible logical leap between scientific psychiatric inquiry and moral-legal conclusions on the ultimate issue of insanity. This article reviews the origins, history, and vicissitudes of the Ultimate Issue Rule and analyzes the Statement on the Insanity Defense from both a legal and psychiatric perspective on the issue of whether psychiatrists should answer the ultimate question in insanity cases. The analysis suggests that APA's conclusions are not supported on scientific or evidentiary grounds, but may be warranted as a policy consideration to safeguard the public image of psychiatry.

Standardization of the capillary electrophoresis procedures Capillarys® CDT and Minicap® CDT in comparison to the IFCC reference measurement procedure.

PubMed

Schellenberg, François; Humeau, Camille

2017-06-01

CDT is at present the most relevant routinely available biological marker of alcohol use and is widely used for screening and monitoring of patients. The lack of standardization leads to specific reference intervals for each procedure. The IFCC working group devoted to CDT demonstrated that the standardization is possible using calibrators assigned to the reference measurement procedure. In this study, we compare the capillary electrophoresis (CE) techniques Capillarys® CDT and Minicap® CDT (Sebia, Lisses, France) to the reference procedure before and after standardization in 126 samples covering the range of CDT measurement. Both capillary electrophoresis procedures show a high correlation (r=0,997) with the reference procedure and the concordance correlation coefficient evaluated according to Mc Bride is "almost perfect" (>0.997 for both CE procedures). The number of results with a relative difference higher than the acceptable difference limit is only 1 for Capillarys® CDT and 5 for Minicap® CDT. These results demonstrate the efficiency of the standardization of CDT measurements for both CE techniques from Sebia, achieved using calibrators assigned to the reference measurement procedure.

Prisoner Fasting as Symbolic Speech: The Ultimate Speech-Action Test.

ERIC Educational Resources Information Center

Sneed, Don; Stonecipher, Harry W.

The ultimate test of the speech-action dichotomy, as it relates to symbolic speech to be considered by the courts, may be the fasting of prison inmates who use hunger strikes to protest the conditions of their confinement or to make political statements. While hunger strikes have been utilized by prisoners for years as a means of protest, it was…

LRFD software for design and actual ultimate capacity of confined rectangular columns.

DOT National Transportation Integrated Search

2013-04-01

The analysis of concrete columns using unconfined concrete models is a well established practice. On the : other hand, prediction of the actual ultimate capacity of confined concrete columns requires specialized nonlinear : analysis. Modern codes and...

Using Gagne's theory to teach procedural skills.

PubMed

Buscombe, Charlotte

2013-10-01

Many key medical procedures are performed every day in clinical practice to yield important diagnostic information and to help determine the disease response to intensive treatments. Training clinicians to perform procedures competently and confidently thus carries considerable weight, helping to assure patient safety, the obtainment of adequate samples and minimising patient discomfort. This article considers how Robert Gagne's instructional design model may be effectively used to design lesson plans and teach procedural skills in small group settings. Gagne's model is based upon the information-processing model of mental events that occur when adults are presented with various stimuli. It highlights nine specific instructional events, which correlate with crucial conditions of learning, and are arranged to maximally enhance the learning process, improve session flow and, ultimately, ensure lesson objectives are comprehensively addressed. This article uses the nine points described by Gagne to outline a comprehensive lesson guide for teaching psychomotor skills, using a bone-marrow aspirate procedure as an example. Each of Gagne's instructional events is considered with specific activities for each, and with the variety of activities delineated to meet diverse learning styles. Gagne's instructional events can produce an effective and comprehensive lesson plan for teaching procedural skills, preparing learners with various preferred learning styles to perform psychomotor skills competently in clinical practice. This lesson plan can be of use for both teachers and students across clinical specialties, encouragingly outlining how Gagne's systematic and widely referenced theory can be creatively and practically used. © 2013 John Wiley & Sons Ltd.

Procedures for the estimation of regional scale atmospheric emissions—An example from the North West Region of England

NASA Astrophysics Data System (ADS)

Lindley, S. J.; Longhurst, J. W. S.; Watson, A. F. R.; Conlan, D. E.

This paper considers the value of applying an alternative pro rata methodology to the estimation of atmospheric emissions from a given regional or local area. Such investigations into less time and resource intensive means of providing estimates in comparison to traditional methods are important due to the potential role of new methods in the development of air quality management plans. A pro rata approach is used here to estimate emissions of SO 2, NO x, CO, CO 2, VOCs and black smoke from all sources and Pb from transportation for the North West region of England. This method has the advantage of using readily available data as well as being an easily repeatable procedure which provides a good indication of emissions to be expected from a particular geographical region. This can then provide the impetus for further emission studies and ultimately a regional/local air quality management plan. Results suggest that between 1987 and 1991 trends in the emissions of the pollutants considered have been less favourable in the North West region than in the nation as a whole.

Remission of type 2 diabetes mellitus after bariatric surgery - comparison between procedures.

PubMed

Fernández-Soto, María L; Martín-Leyva, Ana; González-Jiménez, Amalia; García-Rubio, Jesús; Cózar-Ibáñez, Antonio; Zamora-Camacho, Francisco J; Leyva-Martínez, María S; Jiménez-Ríos, Jose A; Escobar-Jiménez, Fernándo

2017-01-01

We aimed to assess the mid-term type 2 diabetes mellitus recovery patterns in morbidly obese patients by comparing some relevant physiological parameters of patients of bariatric surgery between two types of surgical procedures: mixed (roux-en-Y gastric bypass and biliopancreatic diversion) and restrictive (sleeve gastrectomy). This is a prospective and observational study of co-morbid, type 2 diabetes mellitus evolution in 49 morbidly obese patients: 37 underwent mixed surgery procedures and 12 a restrictive surgery procedure. We recorded weight, height, body mass index, and glycaemic, lipid, and nutritional blood parameters, prior to procedure, as well as six and twelve months post-operatively. In addition, we tested for differences in patient recovery and investigated predictive factors in diabetes remission. Both glycaemic and lipid profiles diminished significantly to healthy levels by 6 and 12 months post intervention. Type 2 diabetes mellitus showed remission in more than 80% of patients of both types of surgical procedures, with no difference between them. Baseline body mass index, glycated haemoglobin, and insulin intake, among others, were shown to be valuable predictors of diabetes remission one year after the intervention. The choice of the type of surgical procedure did not significantly affect the remission rate of type 2 diabetes mellitus in morbidly obese patients. (Endokrynol Pol 2017; 68 (1): 18-25).

Rapid population growth and environmental degradation: ultimate versus proximate factors.

PubMed

Shaw, R P

1989-01-01

This philosophical review of 2 arguments about responsibility for and solutions to environmental degradation concludes that both sides are correct: the ultimate and the proximal causes. Ultimate causes of pollution are defined as the technology responsible for a given type of pollution, such as burning fossil fuel; proximate causes are defined as situation-specific factors confounding the problem, such as population density or rate of growth. Commoner and others argue that developed countries with low or negative population growth rates are responsible for 80% of world pollution, primarily in polluting technologies such as automobiles, power generation, plastics, pesticides, toxic wastes, garbage, warfaring, and nuclear weapons wastes. Distortionary policies also contribute; examples are agricultural trade protection, land mismanagement, urban bias in expenditures, and institutional rigidity., Poor nations are responsible for very little pollution because poverty allows little waste or expenditures for polluting, synthetic technologies. The proximal causes of pollution include numbers and rate of growth of populations responsible for the pollution. Since change in the ultimate cause of pollution remains out of reach, altering the numbers of polluters can make a difference. Predictions are made for proportions of the world's total waste production, assuming current 1.6 tons/capita for developed countries and 0.17 tons/capita for developing countries. If developing countries grow at current rates and become more wealthy, they will be emitting half the world's waste by 2025. ON the other hand, unsustainable population growth goes along with inadequate investment in human capital: education, health, employment, infrastructure. The solution is to improve farming technologies in the 117 non-self-sufficient countries, fund development in the most unsustainable enclaves of growing countries, break institutionalized socio-political rigidity in these enclaves, and focus on

Age and Ultimate Attainment in the Pronunciation of a Foreign Language.

ERIC Educational Resources Information Center

Bongaerts, Theo; van Summeren, Chantal; Planken, Brigette; Schils, Erik

1997-01-01

Reports on two studies addressing the issue of ultimate attainment of pronunciation by late second-language learners. Findings indicate that it is not impossible to achieve an authentic, nativelike pronunciation of a second language after a specified biological time. The article argues that certain learner characteristics and learning contexts may…

Comparison of procedure coding systems for level 1 and 2 hospitals in South Africa.

PubMed

Montewa, Lebogang; Hanmer, Lyn; Reagon, Gavin

2013-01-01

The ability of three procedure coding systems to reflect the procedure concepts extracted from patient records from six hospitals was compared, in order to inform decision making about a procedure coding standard for South Africa. A convenience sample of 126 procedure concepts was extracted from patient records at three level 1 hospitals and three level 2 hospitals. Each procedure concept was coded using ICPC-2, ICD-9-CM, and CCSA-2001. The extent to which each code assigned actually reflected the procedure concept was evaluated (between 'no match' and 'complete match'). For the study sample, CCSA-2001 was found to reflect the procedure concepts most completely, followed by ICD-9-CM and then ICPC-2. In practice, decision making about procedure coding standards would depend on multiple factors in addition to coding accuracy.

Phosphofructokinase and mitochondria partially explain the high ultimate pH of broiler pectoralis major muscle.

PubMed

Matarneh, Sulaiman K; Yen, Con-Ning; Elgin, Jennifer M; Beline, Mariane; da Luz E Silva, Saulo; Wicks, Jordan C; England, Eric M; Dalloul, Rami A; Persia, Michael E; Omara, Islam I; Shi, Hao; Gerrard, David E

2018-05-01

During postmortem metabolism, muscle pH gradually declines to reach an ultimate pH near 5.6 across most meat species. Yet, broiler pectoralis major (P. major) muscle generates meat with high ultimate pH (pH ∼ 5.9). For better understanding of the underlying mechanism responsible for this phenomenon, we evaluated the involvement of breast muscle chilling on the extent of postmortem metabolism. Broiler breast muscles were either subjected to chilling treatment (control) or left at room temperature (RT) for 120 min. P. major muscle from the RT treatment had lower ultimate pH, greater glycogen degradation and lactate accumulation. While these findings suggest that carcass chilling can contribute to the premature termination of postmortem metabolism, chilling did not fully explain the high ultimate pH of P. major muscle. Our results also revealed that glucose-6-phosphate (G6P) was very low at 24 h, and therefore we hypothesized that G6P was limiting. To test this hypothesis, muscle samples from P. major and porcine longissimus lumborum (LL) muscle were homogenized into a reaction buffer that mimics postmortem glycolysis with or without 0.5 mg/mL isolated mitochondria. While samples containing porcine LL muscle reached the normal level of ultimate pH, P. major muscle samples reached a value similar to that observed in vivo even in the presence of excess G6P, indicating that G6P was not limiting. Mitochondria enhanced the glycolytic flux and pH decline in systems containing muscle from both species. More importantly, however, was that in vitro system containing chicken with mitochondria reached pH value similar to that of samples containing LL muscle without mitochondria. To investigate further, phosphofructokinase (PFK) activity was compared in broiler P. major and porcine LL muscle at different pH values. PFK activity was lower in P. major muscle at pH 7, 6.5, and 6.2 than LL muscle. In conclusion, carcass chilling can partially contribute to the high ultimate p

METHYLATED ASIII COMPOUNDS AS POTENTIAL PROXIMATE/ULTIMATE GENOTOXIC METABOLITES OF INORGANIC ARSENIC

EPA Science Inventory

METHYLATED Asm COMPOUNDS AS POTENTIAL PROXIMATE/ULTIMATE GENOTOXIC METABOLITES OF INORGANIC ARSENIC.

The methylation of inorganic arsenic has typically been viewed as a detoxification process. Genotoxicity tests have generally shown that arsenite has greater mutagenic p...

Self-Management Procedures: A Comparison across the Autism Spectrum

ERIC Educational Resources Information Center

Southall, Candice M.; Gast, David L.

2011-01-01

Individuals with autism spectrum disorders (ASD) have difficulty generalizing learned behavior to varied environments with independence. This review of 24 empirical studies compares self-management as a systematic procedure for modifying one's own behavior, to increase target behaviors in students with either autistic disorder (AD) or…

A Comparison of Standard-Setting Procedures for an OSCE in Undergraduate Medical Education.

ERIC Educational Resources Information Center

Kaufman, David M.; Mann, Karen V.; Muijtjens, Arno M. M.; van der Vleuten, Cees P. M.

2000-01-01

Compared four standard-setting procedures for an objective structure clinical examination (OSCE) in medical education. Applied Angoff, borderline, relative, and holistic procedures to the data used to establish a cutoff score for a pass/fail decision. The Angoff and borderline procedures gave similar results; however, the relative and holistic…

A Comparison of Exposure Control Procedures in CATs Using the 3PL Model

ERIC Educational Resources Information Center

Leroux, Audrey J.; Lopez, Myriam; Hembry, Ian; Dodd, Barbara G.

2013-01-01

This study compares the progressive-restricted standard error (PR-SE) exposure control procedure to three commonly used procedures in computerized adaptive testing, the randomesque, Sympson-Hetter (SH), and no exposure control methods. The performance of these four procedures is evaluated using the three-parameter logistic model under the…

Ultimate Spectrum of Solar/Stellar Cosmic Rays

NASA Astrophysics Data System (ADS)

Struminsky, Alexei

2015-08-01

We reconstruct an ultimate spectrum of solar/stellar cosmic rays (SCR) in a given point in the heliosphere (stellar sphere) basing on maximal value of magnetic field strenght in active region and its characteristic linear dimension. An accelerator of given dimensions and magnetic field strengh may accelarate to a finite energy for a given time (a maximal energy of SCR). We will use spectrum of SCR proposed by Syrovatsky (1961) for relativistic and non-relativistic energies normaliszing it to galactic cosmic ray (GCR) intensity at maximal SCR energy. Maximal values of SCR flux propagating in the heliosphere are determined by equilibrium between pressure of interplanetary magnrtic field and dynamic pressure of SCR (Frier&Webber, 1963). The obtained spectra would be applied to explain the extreme solar particle event occurred in about 775 AD basing on the tree-ring chronology (Miyake et al., 2012).

HHV Predicting Correlations for Torrefied Biomass Using Proximate and Ultimate Analyses

PubMed Central

Nhuchhen, Daya Ram; Afzal, Muhammad T.

2017-01-01

Many correlations are available in the literature to predict the higher heating value (HHV) of raw biomass using the proximate and ultimate analyses. Studies on biomass torrefaction are growing tremendously, which suggest that the fuel characteristics, such as HHV, proximate analysis and ultimate analysis, have changed significantly after torrefaction. Such changes may cause high estimation errors if the existing HHV correlations were to be used in predicting the HHV of torrefied biomass. No study has been carried out so far to verify this. Therefore, this study seeks answers to the question: “Can the existing correlations be used to determine the HHV of the torrefied biomass”? To answer this, the existing HHV predicting correlations were tested using torrefied biomass data points. Estimation errors were found to be significantly high for the existing HHV correlations, and thus, they are not suitable for predicting the HHV of the torrefied biomass. New correlations were then developed using data points of torrefied biomass. The ranges of reported data for HHV, volatile matter (VM), fixed carbon (FC), ash (ASH), carbon (C), hydrogen (H) and oxygen (O) contents were 14.90 MJ/kg–33.30 MJ/kg, 13.30%–88.57%, 11.25%–82.74%, 0.08%–47.62%, 35.08%–86.28%, 0.53%–7.46% and 4.31%–44.70%, respectively. Correlations with the minimum mean absolute errors and having all components of proximate and ultimate analyses were selected for future use. The selected new correlations have a good accuracy of prediction when they are validated using another set of data (26 samples). Thus, these new and more accurate correlations can be useful in modeling different thermochemical processes, including combustion, pyrolysis and gasification processes of torrefied biomass. PMID:28952487

The ultimate quantum limits on the accuracy of measurements

NASA Technical Reports Server (NTRS)

Yuen, Horace P.

1992-01-01

A quantum generalization of rate-distortion theory from standard communication and information theory is developed for application to determining the ultimate performance limit of measurement systems in physics. For the estimation of a real or a phase parameter, it is shown that the root-mean-square error obtained in a measurement with a single-mode photon level N cannot do better than approximately N exp -1, while approximately exp(-N) may be obtained for multi-mode fields with the same photon level N. Possible ways to achieve the remarkable exponential performance are indicated.

Ultimately Reliable Pyrotechnic Systems

NASA Technical Reports Server (NTRS)

Scott, John H.; Hinkel, Todd

2015-01-01

This paper presents the methods by which NASA has designed, built, tested, and certified pyrotechnic devices for high reliability operation in extreme environments and illustrates the potential applications in the oil and gas industry. NASA's extremely successful application of pyrotechnics is built upon documented procedures and test methods that have been maintained and developed since the Apollo Program. Standards are managed and rigorously enforced for performance margins, redundancy, lot sampling, and personnel safety. The pyrotechnics utilized in spacecraft include such devices as small initiators and detonators with the power of a shotgun shell, detonating cord systems for explosive energy transfer across many feet, precision linear shaped charges for breaking structural membranes, and booster charges to actuate valves and pistons. NASA's pyrotechnics program is one of the more successful in the history of Human Spaceflight. No pyrotechnic device developed in accordance with NASA's Human Spaceflight standards has ever failed in flight use. NASA's pyrotechnic initiators work reliably in temperatures as low as -420 F. Each of the 135 Space Shuttle flights fired 102 of these initiators, some setting off multiple pyrotechnic devices, with never a failure. The recent landing on Mars of the Opportunity rover fired 174 of NASA's pyrotechnic initiators to complete the famous '7 minutes of terror.' Even after traveling through extreme radiation and thermal environments on the way to Mars, every one of them worked. These initiators have fired on the surface of Titan. NASA's design controls, procedures, and processes produce the most reliable pyrotechnics in the world. Application of pyrotechnics designed and procured in this manner could enable the energy industry's emergency equipment, such as shutoff valves and deep-sea blowout preventers, to be left in place for years in extreme environments and still be relied upon to function when needed, thus greatly enhancing

78 FR 72972 - Application of Ultimate JETCHARTERS, LLC for Commuter Air Carrier Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-04

... all interested persons to show cause why it should not issue an order finding Ultimate JETCHARTERS, LLC, fit, willing, and able, and awarding it commuter air carrier authority to conduct scheduled...

Vector ecology and integrated control procedures

PubMed Central

Laird, Marshall

1963-01-01

The elucidation of population regulatory mechanisms calls for exhaustive biological and ecological studies of whole ecosystems. Until lately, little effort was made to relate insect control activities to such a background, and the use of non-selective pesticides has often resulted in biotic equilibria being disrupted to the ultimate advantage of the organism under attack or of some other undesirable species. However, there is a growing realization in the field of economic entomology at large that biotic control agents usually constitute the major portion of the environmental resistance to increases in pest numbers and that insecticides should be fitted into the ecosystem, and not imposed upon it—in fact, that integrated control procedures are called for. The author considers such integrated procedures from the standpoint of vector control. His paper points out their potentialities in helping to solve resistance problems and in increasing the selectivity of control operations. It further suggests that they offer the means of achieving economical and lasting reductions of vector populations to levels at which human disease transmission is interrupted and pest problems lose much of their importance. PMID:20604165

A Comparison of a Bayesian and a Maximum Likelihood Tailored Testing Procedure.

ERIC Educational Resources Information Center

McKinley, Robert L.; Reckase, Mark D.

A study was conducted to compare tailored testing procedures based on a Bayesian ability estimation technique and on a maximum likelihood ability estimation technique. The Bayesian tailored testing procedure selected items so as to minimize the posterior variance of the ability estimate distribution, while the maximum likelihood tailored testing…

7 CFR 4280.29 - Supplemental financing required for the Ultimate Recipient Project.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Supplemental financing required for the Ultimate Recipient Project. 4280.29 Section 4280.29 Agriculture Regulations of the Department of Agriculture... AND GRANTS Rural Economic Development Loan and Grant Programs § 4280.29 Supplemental financing...

A transition from using multi‐step procedures to a fully integrated system for performing extracorporeal photopheresis: A comparison of costs and efficiencies

PubMed Central

Leblond, Veronique; Ouzegdouh, Maya; Button, Paul

2017-01-01

Abstract Introduction The Pitié Salpêtrière Hospital Hemobiotherapy Department, Paris, France, has been providing extracorporeal photopheresis (ECP) since November 2011, and started using the Therakos® CELLEX® fully integrated system in 2012. This report summarizes our single‐center experience of transitioning from the use of multi‐step ECP procedures to the fully integrated ECP system, considering the capacity and cost implications. Materials and Methods The total number of ECP procedures performed 2011–2015 was derived from department records. The time taken to complete a single ECP treatment using a multi‐step technique and the fully integrated system at our department was assessed. Resource costs (2014€) were obtained for materials and calculated for personnel time required. Time‐driven activity‐based costing methods were applied to provide a cost comparison. Results The number of ECP treatments per year increased from 225 (2012) to 727 (2015). The single multi‐step procedure took 270 min compared to 120 min for the fully integrated system. The total calculated per‐session cost of performing ECP using the multi‐step procedure was greater than with the CELLEX® system (€1,429.37 and €1,264.70 per treatment, respectively). Conclusions For hospitals considering a transition from multi‐step procedures to fully integrated methods for ECP where cost may be a barrier, time‐driven activity‐based costing should be utilized to gain a more comprehensive understanding the full benefit that such a transition offers. The example from our department confirmed that there were not just cost and time savings, but that the time efficiencies gained with CELLEX® allow for more patient treatments per year. PMID:28419561

Assembly of Customized TAL Effectors Through Advanced ULtiMATE System.

PubMed

Yang, Junjiao; Guo, Shengjie; Yuan, Pengfei; Wei, Wensheng

2016-01-01

Transcription activator-like effectors (TALEs) have been widely applied in gene targeting. Here we describe an advanced ULtiMATE (USER-based Ligation-Mediated Assembly of TAL Effector) system that utilizes USER fusion technique and archive of 512 tetramer templates to achieve highly efficient construction of TALEs, which takes only half a day to accomplish the assembly of any given TALE construct. This system is also suitable for large-scale assembly of TALENs and any other TALE-based constructions.

Plug nozzles: The ultimate customer driven propulsion system

NASA Technical Reports Server (NTRS)

Aukerman, Carl A.

1991-01-01

This paper presents the results of a study applying the plug cluster nozzle concept to the propulsion system for a typical lunar excursion vehicle. Primary attention for the design criteria is given to user defined factors such as reliability, low volume, and ease of propulsion system development. Total thrust and specific impulse are held constant in the study while other parameters are explored to minimize the design chamber pressure. A brief history of the plug nozzle concept is included to point out the advanced level of technology of the concept and the feasibility of exploiting the variables considered in this study. The plug cluster concept looks very promising as a candidate for consideration for the ultimate customer driven propulsion system.

A Simple Illustration for the Need of Multiple Comparison Procedures

ERIC Educational Resources Information Center

Carter, Rickey E.

2010-01-01

Statistical adjustments to accommodate multiple comparisons are routinely covered in introductory statistical courses. The fundamental rationale for such adjustments, however, may not be readily understood. This article presents a simple illustration to help remedy this.

Measuring automatic retrieval: a comparison of implicit memory, process dissociation, and speeded response procedures.

PubMed

Horton, Keith D; Wilson, Daryl E; Vonk, Jennifer; Kirby, Sarah L; Nielsen, Tina

2005-07-01

Using the stem completion task, we compared estimates of automatic retrieval from an implicit memory task, the process dissociation procedure, and the speeded response procedure. Two standard manipulations were employed. In Experiment 1, a depth of processing effect was found on automatic retrieval using the speeded response procedure although this effect was substantially reduced in Experiment 2 when lexical processing was required of all words. In Experiment 3, the speeded response procedure showed an advantage of full versus divided attention at study on automatic retrieval. An implicit condition showed parallel effects in each study, suggesting that implicit stem completion may normally provide a good estimate of automatic retrieval. Also, we replicated earlier findings from the process dissociation procedure, but estimates of automatic retrieval from this procedure were consistently lower than those from the speeded response procedure, except when conscious retrieval was relatively low. We discuss several factors that may contribute to the conflicting outcomes, including the evidence for theoretical assumptions and criterial task differences between implicit and explicit tests.

Ultimate strength performance of tankers associated with industry corrosion addition practices

NASA Astrophysics Data System (ADS)

Kim, Do Kyun; Kim, Han Byul; Zhang, Xiaoming; Li, Chen Guang; Paik, Jeom Kee

2014-09-01

In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR), Common Structural Rules (CSR), and harmonised Common Structural Rules (CSRH) are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS), and Time-Dependent Corrosion Wastage Model (TDCWM). To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures

Ultimately short ballistic vertical graphene Josephson junctions

PubMed Central

Lee, Gil-Ho; Kim, Sol; Jhi, Seung-Hoon; Lee, Hu-Jong

2015-01-01

Much efforts have been made for the realization of hybrid Josephson junctions incorporating various materials for the fundamental studies of exotic physical phenomena as well as the applications to superconducting quantum devices. Nonetheless, the efforts have been hindered by the diffusive nature of the conducting channels and interfaces. To overcome the obstacles, we vertically sandwiched a cleaved graphene monoatomic layer as the normal-conducting spacer between superconducting electrodes. The atomically thin single-crystalline graphene layer serves as an ultimately short conducting channel, with highly transparent interfaces with superconductors. In particular, we show the strong Josephson coupling reaching the theoretical limit, the convex-shaped temperature dependence of the Josephson critical current and the exceptionally skewed phase dependence of the Josephson current; all demonstrate the bona fide short and ballistic Josephson nature. This vertical stacking scheme for extremely thin transparent spacers would open a new pathway for exploring the exotic coherence phenomena occurring on an atomic scale. PMID:25635386

The Assessment of the Ultimate Hull Girder Strength of RO-RO Ship after Damages

NASA Astrophysics Data System (ADS)

Zubair Muis Alie, Muhammad; Sitepu, Ganding; Izaak Latumahin, Samuel

2018-03-01

Many accidents of Ro-Ro ships happen in Indonesia such as collision and grounding. When the collision or grounding takes place on the Ro-Ro ship, the ultimate strength of hull structure after damage becomes decrease. Car and passenger decks are critical location since collision and/or grounding occur. In the present study, the assessment of the ultimate hull girder strength is conducted. The cross section of Ro-Ro ship is taken to be analyzed. The collision and grounding damages are assumed to be palced on the side and bottom area, respectively. The damages are created by removing the element from the side shell and bottom part. Finally, the result obtained is compared with one another.

Surgeon and type of anesthesia predict variability in surgical procedure times.

PubMed

Strum, D P; Sampson, A R; May, J H; Vargas, L G

2000-05-01

with variability in surgical procedure times, knowledge of which may ultimately be used to improve surgical scheduling and operating room utilization.

Use of the Boomerang catalyst advantage closure device to facilitate complex multistaged percutaneous revascularization procedures for the treatment of critical limb ischemia.

PubMed

Garcia, Joel A; Casserly, Ivan P

2009-07-01

An increasing spectrum of complex peripheral arterial disease may be successfully treated using percutaneous revascularization techniques. A pair of challenging peripheral revascularization procedures in patients with critical limb ischemia is presented, where an array of interventional tools and techniques were required, and the off-label use of the Boomerang catalyst system closure device was important in managing a variety of complex arterial access issues and ultimately allowing procedural success. Copyright 2009 Wiley-Liss, Inc.

Derived Relational Responding: A Comparison of Match-to-Sample and the Relational Completion Procedure

ERIC Educational Resources Information Center

Dymond, Simon; Whelan, Robert

2010-01-01

Previous research suggests that the Relational Completion Procedure may be an effective alternative procedure for studying derived relational responding. However, the parameters that make it effective, relative to traditional match-to-sample, remain to be determined. The present experiment compared the Relational Completion Procedure and…

Surgical correction of female urinary incontinence: comparison of colporrhaphy, sling and suspension procedures.

PubMed

Yumru, A E; Dinçgez Çakmak, B; Öndeş, B; Ergez, M

2012-01-01

To analyse clinical outcomes of three types of pelvic surgery for the correction of female mixed or stress urinary incontinence. Women who underwent surgery for urinary incontinence between January 2000 and June 2010 were included in the study (n = 268). Patients were nonrandomly assigned to undergo colporrhaphy, suspension procedure or sling procedure according to their clinical situation. Perioperative parameters were recorded. Short- (< 5 years) and long-term (5-10 years) success rates were determined for each group. The short- and long-term complete cure rates were significantly lower, and the duration of catheterization significantly longer, in patients who underwent colporrhaphy compared with both other groups, but there were no significant differences between suspension or sling procedures. Sling and suspension procedures were equally effective in this study, and both were preferable to colporrhaphy.

A transition from using multi-step procedures to a fully integrated system for performing extracorporeal photopheresis: A comparison of costs and efficiencies.

PubMed

Azar, Nabih; Leblond, Veronique; Ouzegdouh, Maya; Button, Paul

2017-12-01

The Pitié Salpêtrière Hospital Hemobiotherapy Department, Paris, France, has been providing extracorporeal photopheresis (ECP) since November 2011, and started using the Therakos ® CELLEX ® fully integrated system in 2012. This report summarizes our single-center experience of transitioning from the use of multi-step ECP procedures to the fully integrated ECP system, considering the capacity and cost implications. The total number of ECP procedures performed 2011-2015 was derived from department records. The time taken to complete a single ECP treatment using a multi-step technique and the fully integrated system at our department was assessed. Resource costs (2014€) were obtained for materials and calculated for personnel time required. Time-driven activity-based costing methods were applied to provide a cost comparison. The number of ECP treatments per year increased from 225 (2012) to 727 (2015). The single multi-step procedure took 270 min compared to 120 min for the fully integrated system. The total calculated per-session cost of performing ECP using the multi-step procedure was greater than with the CELLEX ® system (€1,429.37 and €1,264.70 per treatment, respectively). For hospitals considering a transition from multi-step procedures to fully integrated methods for ECP where cost may be a barrier, time-driven activity-based costing should be utilized to gain a more comprehensive understanding the full benefit that such a transition offers. The example from our department confirmed that there were not just cost and time savings, but that the time efficiencies gained with CELLEX ® allow for more patient treatments per year. © 2017 The Authors Journal of Clinical Apheresis Published by Wiley Periodicals, Inc.

Rats' Memory for Time and Relational Responding in the Duration-Comparison Procedure

ERIC Educational Resources Information Center

Santi, Angelo; Hoover, Claire; Simmons, Sabrina

2011-01-01

Rats were trained in a duration-comparison task to press one lever if the comparison duration ("c") was 1.2-s shorter than a standard duration ("s"), and another lever if c was 1.2-s longer than s. The interval between s and c duration was 1 s. The 10 duration pairs used during training controlled for the absolute duration of "c" and the total…

Equating Multidimensional Tests under a Random Groups Design: A Comparison of Various Equating Procedures

ERIC Educational Resources Information Center

Lee, Eunjung

2013-01-01

The purpose of this research was to compare the equating performance of various equating procedures for the multidimensional tests. To examine the various equating procedures, simulated data sets were used that were generated based on a multidimensional item response theory (MIRT) framework. Various equating procedures were examined, including…

Kepler, the Ultimate Aristotelian

NASA Astrophysics Data System (ADS)

Davis, A. E. L.

A comparison is made between Aristotelian and Newtonian versions of Laws of Motion. Kepler was successful in proving the 2 laws of motion of a single planet - to the extent that agreement with a framework of theory constitutes a proof. Of course he invented his framework of causes after the event, to fit the motions that had been already been quantified - but it may seem to you that Kepler's mainly mechanistic way explanation could have been considered by his contemporaries just as reasonable as Newton's action at a distance. It could be now apprecated that there was a window of less than 50 years before Newton's total synthesis. No-one previously had had the motivation to create a system of "celestial physics" based on a judicious use of Aristotelian principles. Yet this is what Kepler achieved.

Estimating times of surgeries with two component procedures: comparison of the lognormal and normal models.

PubMed

Strum, David P; May, Jerrold H; Sampson, Allan R; Vargas, Luis G; Spangler, William E

2003-01-01

Variability inherent in the duration of surgical procedures complicates surgical scheduling. Modeling the duration and variability of surgeries might improve time estimates. Accurate time estimates are important operationally to improve utilization, reduce costs, and identify surgeries that might be considered outliers. Surgeries with multiple procedures are difficult to model because they are difficult to segment into homogenous groups and because they are performed less frequently than single-procedure surgeries. The authors studied, retrospectively, 10,740 surgeries each with exactly two CPTs and 46,322 surgical cases with only one CPT from a large teaching hospital to determine if the distribution of dual-procedure surgery times fit more closely a lognormal or a normal model. The authors tested model goodness of fit to their data using Shapiro-Wilk tests, studied factors affecting the variability of time estimates, and examined the impact of coding permutations (ordered combinations) on modeling. The Shapiro-Wilk tests indicated that the lognormal model is statistically superior to the normal model for modeling dual-procedure surgeries. Permutations of component codes did not appear to differ significantly with respect to total procedure time and surgical time. To improve individual models for infrequent dual-procedure surgeries, permutations may be reduced and estimates may be based on the longest component procedure and type of anesthesia. The authors recommend use of the lognormal model for estimating surgical times for surgeries with two component procedures. Their results help legitimize the use of log transforms to normalize surgical procedure times prior to hypothesis testing using linear statistical models. Multiple-procedure surgeries may be modeled using the longest (statistically most important) component procedure and type of anesthesia.

Ultimate Osmosis Engineered by the Pore Geometry and Functionalization of Carbon Nanostructures

PubMed Central

Song, Zhigong; Xu, Zhiping

2015-01-01

Osmosis is the key process in establishing versatile functions of cellular systems and enabling clean-water harvesting technologies. Membranes with single-atom thickness not only hold great promises in approaching the ultimate limit of these functions, but also offer an ideal test-bed to explore the underlying physical mechanisms. In this work, we explore diffusive and osmotic transport of water and ions through carbon nanotube and porous graphene based membranes by performing molecular dynamics simulations. Our comparative study shows that the cylindrical confinement in carbon nanotubes offers much higher salt rejection at similar permeability in osmosis compared to porous graphene. Moreover, chemical functionalization of the pores modulates the membrane performance by its steric and electrostatic nature, especially at small-size pores due to the fact that the optimal transport is achieved by ordered water transport near pore edges. These findings lay the ground for the ultimate design of forward osmosis membranes with optimized performance trade-off, given the capability of nano-engineering nanostructures by their geometry and chemistry. PMID:26037602

The prospects of transition metal dichalcogenides for ultimately scaled CMOS

NASA Astrophysics Data System (ADS)

Thiele, S.; Kinberger, W.; Granzner, R.; Fiori, G.; Schwierz, F.

2018-05-01

MOSFET gate length scaling has been a main source of progress in digital electronics for decades. Today, researchers still spend considerable efforts on reducing the gate length and on developing ultimately scaled MOSFETs, thereby exploring both new device architectures and alternative channel materials beyond Silicon such as two-dimensional TMDs (transition metal dichalcogenide). On the other hand, the envisaged scaling scenario for the next 15 years has undergone a significant change recently. While the 2013 ITRS edition required a continuation of aggressive gate length scaling for at least another 15 years, the 2015 edition of the ITRS suggests a deceleration and eventually a levelling off of gate length scaling and puts more emphasis on alternative options such as pitch scaling to keep Moore's Law alive. In the present paper, future CMOS scaling is discussed in the light of emerging two-dimensional MOSFET channel, in particular two-dimensional TMDs. To this end, the scaling scenarios of the 2013 and 2015 ITRS editions are considered and the scaling potential of TMD MOSFETs is investigated by means of quantum-mechanical device simulations. It is shown that for ultimately scaled MOSFETs as required in the 2013 ITRS, the heavy carrier effective masses of the Mo- and W-based TMDs are beneficial for the suppression of direct source-drain tunneling, while to meet the significantly relaxed scaling targets of the 2016 ITRS heavy-effective-mass channels are not needed.

Children’s Inequity Aversion in Procedural Justice Context: A Comparison of Advantageous and Disadvantageous Inequity

PubMed Central

Qiu, Xiaoju; Yu, Jing; Li, Tingyu; Cheng, Nanhua; Zhu, Liqi

2017-01-01

There are two forms of unfairness widely studied in resource allocation settings: disadvantageous inequity (DI) in which one receives less than the partner and advantageous inequity (AI) in which one receives more than the other. We investigated children’s aversion to AI and DI in a procedural justice context. Children of 4-, 6-, and 8- years old were asked to spin a wheel (procedure) to decide how to allocate two different rewards with others. In each condition, they chose between a fair procedure providing equal chances for the two parties to get the bigger reward, and an unfair procedure (either a disadvantageous procedure in the DI condition, or an advantageous procedure in the AI condition). Results showed that children in the two younger age groups had a preference for the unfair procedure that would maximize their own profit in AI, but a greater aversion to the unfair procedure that would disadvantage them in DI. Eight-year-olds, however, had a greater preference for the fair procedure in AI than the 6-year-olds. In addition, the discrepancy between aversion to AI and DI disappeared in the 8-year-olds. The findings indicate children’s development of other-oriented concerns such as fairness concern and altruism in procedural justice, consistent with previous findings in distributive justice. PMID:29093697

Comparison of a minimally invasive procedure versus standard microscopic discotomy: a prospective randomised controlled clinical trial

PubMed Central

Greiner-Perth, R.; Boehm, H.; Mahlfeld, K.; Grasshoff, H.; Allam, Y.; Awiszus, F.

2009-01-01

A Prospective randomised controlled study was done to determine statistical difference between the standard microsurgical discotomy (MC) and a minimally invasive microscopic procedure for disc prolapse surgery by comparing operation duration and clinical outcome. Additionally, the transferability of the results was determined by a bicentric design. The microscopic assisted percutaneous nucleotomy (MAPN) has been advocated as a minimally invasive tubular technique. Proponents have claimed that minimally invasive procedures reduce postoperative pain and accelerate the recovery. In addition, there exist only a limited number of well-designed comparison studies comparing standard microdiscotomy to a tubular minimally invasive technique that support this claim. Furthermore, there are no well-designed studies looking at the transferability of those results and possible learning curve phenomena. We studied 100 patients, who were planned for disc prolapse surgery at two centres [50 patients at the developing centre (index) and 50 patients at the less experienced (transfer) centre]. The randomisation was done separately for each centre, employing a block-randomisation procedure with respect to age and preoperative Oswestry score. Operation duration was chosen as a primary outcome parameter as there was a distinguished shortening observed in a preliminary study at the index centre enabling a sound case number estimation. The following data were compared between the two groups and the centres with a 12-month follow-up: surgical times (operation duration and approach duration), the clinical results, leg and back pain by visual analogue scale, the Oswestry disability index, length of hospital stay, return to work time, and complications. The operation duration was statistically identical for MC (57.8 ± 20.2 min) at the index centre and for MAPN (50.3 ± 18.3 min) and MC (54.7 ± 18.1 min) at the transfer centre. The operation duration was only significantly shorter

Future Synchrotron Light Sources Based on Ultimate Storage Rings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai; /SLAC

2012-04-09

The main purpose of this talk is to describe how far one might push the state of the art in storage ring design. The talk will start with an overview of the latest developments and advances in the design of synchrotron light sources based on the concept of an 'ultimate' storage ring. The review will establish how bright a ring based light source might be, where the frontier of technological challenges are, and what the limits of accelerator physics are. Emphasis will be given to possible improvements in accelerator design and developments in technology toward the goal of achieving anmore » ultimate storage ring. An ultimate storage ring (USR), defined as an electron ring-based light source having an emittance in both transverse planes at the diffraction limit for the range of X-ray wavelengths of interest for a scientific community, would provide very high brightness photons having high transverse coherence that would extend the capabilities of X-ray imaging and probe techniques beyond today's performance. It would be a cost-effective, high-coherence 4th generation light source, competitive with one based on energy recovery linac (ERL) technology, serving a large number of users studying material, chemical, and biological sciences. Furthermore, because of the experience accumulated over many decades of ring operation, it would have the great advantage of stability and reliability. In this paper we consider the design of an USR having 10-pm-rad emittance. It is a tremendous challenge to design a storage ring having such an extremely low emittance, a factor of 100 smaller than those in existing light sources, especially such that it has adequate dynamic aperture and beam lifetime. In many ultra-low emittance designs, the injection acceptances are not large enough for accumulation of the electron beam, necessitating on-axis injection where stored electron bunches are completely replaced with newly injected ones. Recently, starting with the MAX-IV 7-bend achromatic

Comparison of implant-abutment interface misfits after casting and soldering procedures.

PubMed

Neves, Flávio Domingues das; Elias, Gisele Araújo; da Silva-Neto, João Paulo; de Medeiros Dantas, Lucas Costa; da Mota, Adérito Soares; Neto, Alfredo Júlio Fernandes

2014-04-01

The aim of this study was to compare vertical and horizontal adjustments of castable abutments after conducting casting and soldering procedures. Twelve external hexagonal implants (3.75 × 10 mm) and their UCLA abutments were divided according their manufacturer and abutment type: PUN (plastic UCLA, Neodent), PUC (plastic UCLA, Conexão), PU3i (plastic UCLA, Biomet 3i), and PUTN (plastic UCLA with Tilite milled base, Neodent). Three infrastructures of a fixed partial implant-supported bridge with 3 elements were produced for each group. The measurements of vertical (VM) and horizontal (HM) misfits were obtained via scanning electron microscopy after completion of casting and soldering. The corresponding values were determined to be biomechanically acceptable to the system, and the results were rated as a percentage. Statistical analysis establishes differences between groups by chi-square after procedures, and McNeman's test was applied to analyze the influence of soldering over casting (α ≤ .05). For the values of VM and HM, respectively, when the casting process was complete, it was observed that 83.25% and 100% (PUTN), 33.3% and 27.75% (PUN), 33.3% and 88.8% (PUC), 33.3% and 94.35% (PU3i) represented acceptable values. After completing the requisite soldering, acceptable values were 50% and 94.35% (PUTN), 16.6% and 77.7% (PUN), 38.55% and 77.7% (PUC), and 27.75% and 94.35% (PU3i). Within the limitations of this study, it can be concluded that the premachined abutments presented more acceptable VM values. The HM values were within acceptable limits before and after the soldering procedure for most groups. Further, the soldering procedure resulted in an increase of VM in all groups.

Robotic-Assisted Procedures in Pediatric Surgery: A Critical Appraisal of the Current Best Evidence in Comparison to Conventional Minimally Invasive Surgery.

PubMed

Friedmacher, Florian; Till, Holger

2015-11-01

In recent years, the use of robotic-assisted surgery (RAS) has expanded within pediatric surgery. Although increasing numbers of pediatric RAS case-series have been published, the level of evidence remains unclear, with authors mainly focusing on the comparison with open surgery rather than the corresponding laparoscopic approach. The aim of this study was to critically appraise the published literature comparing pediatric RAS with conventional minimally invasive surgery (MIS) in order to evaluate the current best level of evidence. A systematic literature-based search for studies comparing pediatric RAS with corresponding MIS procedures was performed using multiple electronic databases and sources. The level of evidence was determined using the Oxford Centre for Evidence-based Medicine (OCEBM) criteria. A total of 20 studies met defined inclusion criteria, reporting on five different procedures: fundoplication (n=8), pyeloplasty (n=8), nephrectomy (n=2), gastric banding (n=1), and sleeve gastrectomy (n=1). Included publications comprised 5 systematic reviews and 15 cohort/case-control studies (OCEBM Level 3 and 4, respectively). No studies of OCEBM Level 1 or 2 were identified. Limited evidence indicated reduced operative time (pyeloplasty) and shorter hospital stay (fundoplication) for pediatric RAS, whereas disadvantages were longer operative time (fundoplication, nephrectomy, gastric banding, and sleeve gastrectomy) and higher total costs (fundoplication and sleeve gastrectomy). There were no differences reported for complications, success rates, or short-term outcomes between pediatric RAS and conventional MIS in these procedures. Inconsistency was found in study design and follow-up with large clinical heterogeneity. The best available evidence for pediatric RAS is currently OCEBM Level 3, relating only to fundoplication and pyeloplasty. Therefore, higher-quality studies and comparative data for other RAS procedures in pediatric surgery are required.

A Simulation Comparison of Parametric and Nonparametric Dimensionality Detection Procedures

ERIC Educational Resources Information Center

Mroch, Andrew A.; Bolt, Daniel M.

2006-01-01

Recently, nonparametric methods have been proposed that provide a dimensionally based description of test structure for tests with dichotomous items. Because such methods are based on different notions of dimensionality than are assumed when using a psychometric model, it remains unclear whether these procedures might lead to a different…

A Comparison of Declarative and Hybrid Declarative-Procedural Models for Rover Operations

NASA Technical Reports Server (NTRS)

Knight, Russell; Rabideau, Gregg; Lenda, Matthew; Maldague, Pierre

2012-01-01

The MAPGEN [2] (Mixed-initiative Activity Plan GENerator) planning system is a great example of a hybrid procedural/declarative system where the advantages of each are leveraged to produce an effective planner/scheduler for Mars Exploration Rover tactical planning. We explore the adaptation of the same domain to an entirely declarative planning system (ASPEN [4] Activity Scheduling and Planning ENvironment), and demonstrate that, with some translation, much of the procedural knowledge encoding is amenable to a declarative knowledge encoding.

Ultimate boundedness stability and controllability of hereditary systems

NASA Technical Reports Server (NTRS)

Chukwu, E. N.

1979-01-01

By generalizing the Liapunov-Yoshizawa techniques, necessary and sufficient conditions are given for uniform boundedness and uniform ultimate boundedness of a rather general class of nonlinear differential equations of neutral type. Among the applications treated by the methods are the Lienard equation of neutral type and hereditary systems of Lurie type. The absolute stability of this later equation is also investigated. A certain existence result of a solution of a neutral functional differential inclusion with two point boundary values is applied to study the exact function space controllability of a nonlinear neutral functional differential control system. A geometric growth condition is used to characterize both the function space and Euclidean controllability of another nonlinear delay system which has a compact and convex control set. This yields conditions under which perturbed nonlinear delay controllable systems are controllable.

A Comparison of Domain Sampling Procedures for Test Construction

DTIC Science & Technology

1992-10-01

B AEROSPACE GROUND EQUIPNENT GENERAL MECHANIC AFSC 454X1 306 KNOWLEDGE TEST AFPT 80-423-205 103 AEROSPACE GOUND EQUIPNENT SPECIALTY (AFS 454Xl) JOB... 454X1 ). The information collected will be used for research purposes only and will have no effect on your career. Test results will be available for...exercise proper towing and positioning procedures, operate two-way radios and clean vehicles. 127 AEROSPACE GROUND EQUIPMENT AFSC 454X1 SELF-RATING FORNS

A Comparison of Error-Correction Procedures on Skill Acquisition during Discrete-Trial Instruction

ERIC Educational Resources Information Center

Carroll, Regina A.; Joachim, Brad T.; St. Peter, Claire C.; Robinson, Nicole

2015-01-01

Previous research supports the use of a variety of error-correction procedures to facilitate skill acquisition during discrete-trial instruction. We used an adapted alternating treatments design to compare the effects of 4 commonly used error-correction procedures on skill acquisition for 2 children with attention deficit hyperactivity disorder…

Comparison of proposed survey procedures for detection of forest carnivores

Treesearch

Kerry R. Foresman; Dean E. Pearson

1998-01-01

American marten (Martes americana), fisher (M. pennanti), wolverine (Gulo gulo), and lynx (Lynx lynx) are forest carnivores believed threatened by disturbance of late-successional forests. To manage forested ecosystems for these species, effective methods for their detection must be available. Recently, the U.S. Forest Service proposed standardized survey procedures...

Ultimate force and stiffness of 2-piece zirconium dioxide implants with screw-retained monolithic lithium-disilicate reconstructions.

PubMed

Joda, Tim; Voumard, Benjamin; Zysset, Philippe K; Brägger, Urs; Ferrari, Marco

2018-04-01

The aims were to analyze stiffness, ultimate force, and failure modes of a 2-piece zirconium dioxide (ZrO 2 ) implant system. Eleven 2-piece ZrO 2 implants, each mounted with ZrO 2 abutments plus bonded monolithic lithium disilicate (LS 2 ) restorations, were grouped for 3.3mm (A) and 4.1mm (B) diameter samples. Quasi-static load was monotonically applied under a standardized test set-up (loading configuration according to DIN ISO 14801). The ultimate force was defined as the maximum force that implants are able to carry out until fracture; stiffness was measured as the maximum slope during loading. An unpaired t-test was performed between group A and B for ultimate force and stiffness (p<0.05). Force-displacement curves revealed statistically homogenous inner-group results for all samples. Failure modes showed characteristic fractures at the neck configuration of the implants independent of the diameter. Mean stiffness was 1099N/mm (±192) for group A, and significantly lower compared to group B with 1630N/mm (±274) (p<0.01); whereas mean ultimate force was 348N (±53) for group A, and significantly increased for group B with 684N (±29) (p<0.0001). The examined 2-piece ZrO 2 implant system mounted to LS 2 -restorations seems to be a stable unit under in-vitro conditions with mechanical properties compared to loading capacity of physiological force. The metal-free implant reconstructions demonstrated high stiffness and ultimate force under quasi-static load for single tooth replacement under consideration of the dental indication of narrow and standard diameter implants. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

A Comparison of Heuristic Procedures for Minimum within-Cluster Sums of Squares Partitioning

ERIC Educational Resources Information Center

Brusco, Michael J.; Steinley, Douglas

2007-01-01

Perhaps the most common criterion for partitioning a data set is the minimization of the within-cluster sums of squared deviation from cluster centroids. Although optimal solution procedures for within-cluster sums of squares (WCSS) partitioning are computationally feasible for small data sets, heuristic procedures are required for most practical…

L2 and L3 Ultimate Attainment: An Investigation of Two Parameters

ERIC Educational Resources Information Center

Hermas, Abdelkader

2014-01-01

This study considers the upper limit of ultimate attainment in the L2 French and L3 English of trilingual learners. The learners are native speakers of Moroccan Arabic who started learning L2 French at eight and L3 English at 16. They are advanced in both languages. Four constructions representing the verb movement and null subject parameter were…

Procedure for calculating estimated ultimate recoveries of wells in the Mississippian Barnett Shale, Bend Arch–Fort Worth Basin Province of north-central Texas

USGS Publications Warehouse

Leathers-Miller, Heidi M.

2017-11-28

In 2015, the U.S. Geological Survey published an assessment of technically recoverable continuous oil and gas resources of the Mississippian Barnett Shale in the Bend Arch–Fort Worth Basin Province of north-central Texas. Of the two assessment units involved in the overall assessment, one included a roughly equal number of oil wells and gas wells as classified by the U.S. Geological Survey’s standard of gas wells having production greater than or equal to 20,000 cubic feet of gas per barrel of oil and oil wells having production less than 20,000 cubic feet of gas per barrel of oil. As a result, estimated ultimate recoveries (EURs) were calculated for both oil wells and gas wells in one of the assessment units. Generally, only gas EURs or only oil EURs are calculated for an assessment unit. These EURs were calculated with data from IHS MarkitTM using DeclinePlus software in the Harmony interface and were a major component of the quantitative resource assessment. The calculated mean EURs ranged from 235 to 2,078 million cubic feet of gas and 21 to 39 thousand barrels of oil for various subsets of wells.

Vertical ridge augmentation using xenogenous bone blocks: a comparison between the flap and tunneling procedures.

PubMed

Xuan, Feng; Lee, Chun-Ui; Son, Jeong-Seog; Fang, Yiqin; Jeong, Seung-Mi; Choi, Byung-Ho

2014-09-01

Previous studies have shown that the subperiosteal tunneling procedure in vertical ridge augmentation accelerates healing after grafting and prevents graft exposure, with minor postoperative complications. It is conceivable that new bone formation would be greater with the tunneling procedure than with the flap procedure, because the former is minimally invasive. This hypothesis was tested in this study by comparing new bone formation between the flap and tunneling procedures after vertical ridge augmentation using xenogenous bone blocks in a canine mandible model. Two Bio-Oss blocks were placed on the edentulous ridge in each side of the mandibles of 6 mongrel dogs. The blocks in each side were randomly assigned to grafting with a flap procedure (flap group) or grafting with a tunneling procedure (tunneling group). The mean percentage of newly formed bone within the block was 15.3 ± 6.6% in the flap group and 46.6 ± 23.4% in the tunneling group. Based on data presented in this study, when a tunneling procedure is used to place xenogenous bone blocks for vertical ridge augmentation, bone formation in the graft sites is significantly greater than when a flap procedure is used. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

The Ultimate Strength of Double Hull Oil Tanker Due to Grounding and Collision

NASA Astrophysics Data System (ADS)

Izaak Latumahina, Samuel; Zubair Muis Alie, Muhammad; Sitepu, Ganding

2018-02-01

The damaged tanker by grounding and collision may totally collapse if loss its buoyancy, stability and suffer structural failure. The objective of the present study is to investigate the ultimate strength of double hull oil tanker under vertical bending moments due to grounding and collision. The damages are modelled by removing the elements consist of stiffened and unstiffened plates from the damages part. One-frame space of the double hull oil tanker is taken to be analysed. Two damages cases are considered in the analyses those are grounding and collision. The transversal damage extent for grounding are 10%, 25%, 40% and 55%. The groundings are placed at symmetric position on the outer bottom part. For the case of collision, the vertical damage extent are taken as 10%, 20%, 40% and 60%. The transversal damages extent is taken to be B/16 and it is constant for all collision damages. The investigation of the ultimate strength is performed by the Non-Linear Finite Element Analysis method under moment control. The boundary condition is applied with fully constrained on all nodes at the aft-end, while the rigid linked on all nodes is attached at the fore-end with respect to the reference point on the neutral axis. The initial imperfection, welding residual stress and crack are not considered in the analyses. The results obtained by Non-Linear Finite Element Analyses for the ultimate strength are compared with the in-house program using Smith’s method implemented in HULLST. The stress distribution and deformation for every case of damages including intact are also discussed in the present study.

Anaesthesia in outer space: the ultimate ambulatory setting?

PubMed

Komorowski, Matthieu; Fleming, Sarah; Hinkelbein, Jochen

2016-12-01

Missions to the Moon or more distant planets are planned in the next future, and will push back the limits of our experience in providing medical support in remote environments. Medical preparedness is ongoing, and involves planning for emergency surgical interventions and anaesthetic procedures. This review will summarize what principles of ambulatory anaesthesia on Earth could benefit the environment of a space mission with its unique constraints. Ambulatory anaesthesia relies on several principles such as improved patient pathway, correct patient selection, optimized procedural strategies to hasten recovery and active prevention of postoperative complications. Severe limitations in the equipment available and the skills of the crew members represent the key factors to be taken into account when designing the on-board medical system for future interplanetary space missions. The application of some of the key principles of ambulatory anaesthesia, as well as recent advances in anaesthetic techniques and better understanding of human adaptation to the space environment might allow nonanaesthesiologist physicians to perform common anaesthetic procedures, whilst maximizing crew safety and minimizing the impact of medical events on the mission.

Space simulation ultimate pressure lowered two decades by removal of diffusion pump oil contaminants during operation

NASA Technical Reports Server (NTRS)

Buggele, A. E.

1973-01-01

The complex problem why large space simulation chambers do not realize the true ultimate vacuum was investigated. Some contaminating factors affecting diffusion pump performance have been identified and some advances in vacuum/distillation/fractionation technology have been achieved which resulted in a two decade or more lower ultimate pressure. Data are presented to show the overall or individual contaminating effect of commonly used phthalate ester plasticizers of 390 to 530 molecular weight on diffusion pump performance. Methods for removing contaminants from diffusion pump silicone oil during operation and reclaiming contaminated oil by high vacuum molecular distillation are described.

Squat Biomechanical Modeling Results from Exercising on the Hybrid Ultimate Lifting Kit

NASA Technical Reports Server (NTRS)

Gallo, Christopher A.; Thompson, William K.; Lewandowski, Beth E.; Jagodnik, Kathleen M.

2016-01-01

Long duration space travel will expose astronauts to extended periods of reduced gravity. Since gravity is not present to aid loading, astronauts will use resistive and aerobic exercise regimes for the duration of the space flight to minimize loss of bone density, muscle mass and aerobic capacity that occurs during exposure to a reduced gravity environment. Unlike the International Space Station (ISS), the area available for an exercise device in the next generation of spacecraft is limited and therefore compact resistance exercise device prototypes are being developed. The Advanced Resistive Exercise Device (ARED) currently on the ISS is being used as a benchmark for the functional performance of these new devices. Biomechanical data collection and computational modeling aid the device design process by quantifying the joint torques and the musculoskeletal forces that occur during exercises performed on the prototype devices. The computational models currently under development utilize the OpenSim software, an open source code for musculoskeletal modeling, with biomechanical input data from test subjects for estimation of muscle and joint loads. The subjects are instrumented with reflective markers for motion capture data collection while exercising on the Hybrid Ultimate Lifting Kit (HULK) prototype device. Ground reaction force data is collected with force plates under the feet and device loading is recorded through load cells internal to the HULK. Test variables include applied device load, narrow or wide foot stance, slow or fast cadence and the harness or long bar interface between the test subject and the device. Data is also obtained using free weights for a comparison to the resistively loaded exercise device. This data is input into the OpenSim biomechanical model, which has been scaled to match the anthropometrics of the test subject, to calculate the body loads. The focus of this presentation is to summarize the results from the full squat exercises

Ultimate Tensile Strength as a Function of Test Rate for Various Ceramic Matrix Composites at Elevated Temperatures

NASA Technical Reports Server (NTRS)

Choi, Sung R.; Bansal, Narottam P.; Gyekenyesi, John P.

2002-01-01

Ultimate tensile strength of five different continuous fiber-reinforced ceramic composites, including SiC/BSAS (2D 2 types), SiC/MAS-5 (2D), SiC/SiC (2D enhanced), and C/SiC(2D) was determined as a function of test rate at I 100 to 1200 'C in air. All five composite materials exhibited a significant dependency of ultimate strength on test rate such that the ultimate strength decreased with decreasing test rate, similar to the behavior observed in many advanced monolithic ceramics at elevated temperatures. The application of the preloading technique as well as the prediction of life from one loading configuration (constant stress rate) to another (constant stress loading) for SiC/BSAS suggested that the overall macroscopic failure mechanism of the composites would be the one governed by a power-law type of damage evolution/accumulation, analogous to slow crack growth commonly observed in advanced monolithic ceramics.

Inducing changes in arousal and valence: comparison of two mood induction procedures.

PubMed

Jallais, Christophe; Gilet, Anne-Laure

2010-02-01

This research examined the relative effectiveness of two mood induction procedures (MIPs) for inducing four specific moods varying along the dimensions of both valence and arousal. Participants were randomly assigned either to an autobiographical recall or to a music and guided imagery MIP and underwent a happiness, serenity, anger, or sadness mood induction. The findings confirmed the effectiveness of the two MIPs in producing changes on both the valence and arousal dimensions of mood. The results also revealed an unexpected greater efficiency of the autobiographical recall than of the combined procedure.

78 FR 55117 - Ultimate Heat Sink for Nuclear Power Plants; Draft Regulatory Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-09

... applicants may use to implement general design criteria (GDC) that are applicable to the ultimate heat sink... only for comments received on or before this date. Although a time limit is given, comments and... published guides are encouraged at any time. ADDRESSES: You may submit comment by any of the following...

Definition of an XML markup language for clinical laboratory procedures and comparison with generic XML markup.

PubMed

Saadawi, Gilan M; Harrison, James H

2006-10-01

Clinical laboratory procedure manuals are typically maintained as word processor files and are inefficient to store and search, require substantial effort for review and updating, and integrate poorly with other laboratory information. Electronic document management systems could improve procedure management and utility. As a first step toward building such systems, we have developed a prototype electronic format for laboratory procedures using Extensible Markup Language (XML). Representative laboratory procedures were analyzed to identify document structure and data elements. This information was used to create a markup vocabulary, CLP-ML, expressed as an XML Document Type Definition (DTD). To determine whether this markup provided advantages over generic markup, we compared procedures structured with CLP-ML or with the vocabulary of the Health Level Seven, Inc. (HL7) Clinical Document Architecture (CDA) narrative block. CLP-ML includes 124 XML tags and supports a variety of procedure types across different laboratory sections. When compared with a general-purpose markup vocabulary (CDA narrative block), CLP-ML documents were easier to edit and read, less complex structurally, and simpler to traverse for searching and retrieval. In combination with appropriate software, CLP-ML is designed to support electronic authoring, reviewing, distributing, and searching of clinical laboratory procedures from a central repository, decreasing procedure maintenance effort and increasing the utility of procedure information. A standard electronic procedure format could also allow laboratories and vendors to share procedures and procedure layouts, minimizing duplicative word processor editing. Our results suggest that laboratory-specific markup such as CLP-ML will provide greater benefit for such systems than generic markup.

Ultimate pier and contraction scour prediction in cohesive soils at selected bridges in Illinois.

DOT National Transportation Integrated Search

2013-09-01

The Scour Rate In COhesive Soils-Erosion Function Apparatus (SRICOS-EFA) method includes an ultimate scour prediction that is : the equilibrium maximum pier and contraction scour of cohesive soils over time. The purpose of this report is to present t...

A comparison of pecking generated by serial, delay, and trace autoshaping procedures1

PubMed Central

Newlin, Robert J.; LoLordo, Vincent M.

1976-01-01

Pigeons were exposed to serial, delay, and trace autoshaping procedures. In Experiment I, all conditioned stimuli (CSs) were changes in illumination of the response key. The number of trials to acquisition of the keypeck increased from serial, to 4-sec delay, 8-sec delay, and 8-sec trace procedures, in that order. In Experiment II, which used a longer intertrial interval, trials to criterion increased from 8-sec delay, to 28-sec delay, 8-sec trace, and 28-sec trace procedures, in that order. In Experiment III, two groups received serial procedures in which the first CS was either a tone or a houselight, and the second was a keylight. The tone group acquired the key peck more rapidly than the houselight group. Early in conditioning in these experiments, and when the conditioned stimulus was a change in the keylight, there was a short latency to the onset of pecking and pecking was directed at the CS. After extensive conditioning, or when the CS was relatively diffuse, pecking still occurred, but had a longer latency and was not reliably directed toward the conditioned stimulus. PMID:16811907

Exploring Ultimate Water Capillary Evaporation in Nanoscale Conduits.

PubMed

Li, Yinxiao; Alibakhshi, Mohammad Amin; Zhao, Yihong; Duan, Chuanhua

2017-08-09

Capillary evaporation in nanoscale conduits is an efficient heat/mass transfer strategy that has been widely utilized by both nature and mankind. Despite its broad impact, the ultimate transport limits of capillary evaporation in nanoscale conduits, governed by the evaporation/condensation kinetics at the liquid-vapor interface, have remained poorly understood. Here we report experimental study of the kinetic limits of water capillary evaporation in two dimensional nanochannels using a novel hybrid channel design. Our results show that the kinetic-limited evaporation fluxes break down the limits predicated by the classical Hertz-Knudsen equation by an order of magnitude, reaching values up to 37.5 mm/s with corresponding heat fluxes up to 8500 W/cm 2 . The measured evaporation flux increases with decreasing channel height and relative humidity but decreases as the channel temperature decreases. Our findings have implications for further understanding evaporation at the nanoscale and developing capillary evaporation-based technologies for both energy- and bio-related applications.

Adaptive graph-based multiple testing procedures

PubMed Central

Klinglmueller, Florian; Posch, Martin; Koenig, Franz

2016-01-01

Multiple testing procedures defined by directed, weighted graphs have recently been proposed as an intuitive visual tool for constructing multiple testing strategies that reflect the often complex contextual relations between hypotheses in clinical trials. Many well-known sequentially rejective tests, such as (parallel) gatekeeping tests or hierarchical testing procedures are special cases of the graph based tests. We generalize these graph-based multiple testing procedures to adaptive trial designs with an interim analysis. These designs permit mid-trial design modifications based on unblinded interim data as well as external information, while providing strong family wise error rate control. To maintain the familywise error rate, it is not required to prespecify the adaption rule in detail. Because the adaptive test does not require knowledge of the multivariate distribution of test statistics, it is applicable in a wide range of scenarios including trials with multiple treatment comparisons, endpoints or subgroups, or combinations thereof. Examples of adaptations are dropping of treatment arms, selection of subpopulations, and sample size reassessment. If, in the interim analysis, it is decided to continue the trial as planned, the adaptive test reduces to the originally planned multiple testing procedure. Only if adaptations are actually implemented, an adjusted test needs to be applied. The procedure is illustrated with a case study and its operating characteristics are investigated by simulations. PMID:25319733

Comparison of 30-day outcomes after emergency general surgery procedures: potential for targeted improvement.

PubMed

Ingraham, Angela M; Cohen, Mark E; Bilimoria, Karl Y; Raval, Mehul V; Ko, Clifford Y; Nathens, Avery B; Hall, Bruce L

2010-08-01

Patients who undergo emergency operations represent a high-risk population and have been shown to have a high risk of poor outcomes. Little is known, however, about the variability in the quality of emergency general surgical care across hospitals or within hospitals across different procedures. The objectives of this study were to identify risk factors associated with adverse events, to compare 30-day outcomes after 3 common emergency general surgery procedures within and across hospitals, and thus, to determine whether the quality of emergency surgical care is procedure-dependent or intrinsic to other aspects of the hospital environment. Patients who underwent emergency appendectomy, cholecystectomy, or colorectal resection at 95 hospitals that submitted at least 20 of each procedure were identified in the 2005-2008 American College of Surgeons National Surgical Quality Improvement Project database. Outcomes of interest included 30-day overall morbidity and serious morbidity/mortality. Step-wise logistic regression generated patient-level predicted probabilities of an outcome. Based on the expected probabilities, observed to expected (O/E) ratios for each outcome, after each of the 3 procedures, were calculated for each hospital. Hospitals were divided into terciles based on O/E ratios. The agreement on hospital outcomes performance for overall morbidity and serious morbidity/mortality after appendectomy, cholecystectomy, and colorectal resection was assessed using weighted kappa statistics. Of the 30,788 appendectomies, 1,984 (6.44%) patients had any morbidity, and 1,140 (3.70%) patients had a serious morbidity or died. Of the 5,824 cholecystectomies, 503 (8.64%) patients had any morbidity, and 371 (6.37%) patients had a serious morbidity or died. Of the 8,990 colorectal resections, 4,202 (46.74%) patients had any morbidity, and 3,736 (41.56%) patients had a serious morbidity or died. For overall morbidity, O/E ratios for appendectomy ranged from 0.26 to 2.36; O

Roadmap and standard operating procedures for biobanking and discovery of neurochemical markers in ALS.

PubMed

Otto, Markus; Bowser, Robert; Turner, Martin; Berry, James; Brettschneider, Johannes; Connor, James; Costa, Júlia; Cudkowicz, Merit; Glass, Jonathan; Jahn, Olaf; Lehnert, Stefan; Malaspina, Andrea; Parnetti, Lucilla; Petzold, Axel; Shaw, Pamela; Sherman, Alexander; Steinacker, Petra; Süssmuth, Sigurd; Teunissen, Charlotte; Tumani, Hayrettin; Wuolikainen, Anna; Ludolph, Albert

2012-01-01

Despite major advances in deciphering the neuropathological hallmarks of amyotrophic lateral sclerosis (ALS), validated neurochemical biomarkers for monitoring disease activity, earlier diagnosis, defining prognosis and unlocking key pathophysiological pathways are lacking. Although several candidate biomarkers exist, translation into clinical application is hindered by small sample numbers, especially longitudinal, for independent verification. This review considers the potential routes to the discovery of neurochemical markers in ALS, and provides a consensus statement on standard operating procedures that will facilitate multicenter collaboration, validation and ultimately clinical translation.

User's guide to UGRS: the Ultimate Grading and Remanufacturing System (version 5.0).

Treesearch

John Moody; Charles J. Gatchell; Elizabeth S. Walker; Powsiri Klinkhachorn

1998-01-01

The Ultimate Grading and Remanufacturing System (UGRS) is the latest generation of advanced computer programs for lumber grading. It is designed to be a training and research tool that allows grading of lumber according to 1998 NHLA rules and remanufacturing for maximum dollar value. A 32-bit application that runs under all Microsoft Windows operating systems, UGRS...

The theoretical ultimate magnetoelectric coefficients of magnetoelectric composites by optimization design

NASA Astrophysics Data System (ADS)

Wang, H.-L.; Liu, B.

2014-03-01

This paper investigates what is the largest magnetoelectric (ME) coefficient of ME composites, and how to realize it. From the standpoint of energy conservation, a theoretical analysis is carried out on an imaginary lever structure consisting of a magnetostrictive phase, a piezoelectric phase, and a rigid lever. This structure is a generalization of various composite layouts for optimization on ME effect. The predicted theoretical ultimate ME coefficient plays a similar role as the efficiency of ideal heat engine in thermodynamics, and is used to evaluate the existing typical ME layouts, such as the parallel sandwiched layout and the serial layout. These two typical layouts exhibit ME coefficient much lower than the theoretical largest values, because in the general analysis the stress amplification ratio and the volume ratio can be optimized independently and freely, but in typical layouts they are dependent or fixed. To overcome this shortcoming and achieve the theoretical largest ME coefficient, a new design is presented. In addition, it is found that the most commonly used electric field ME coefficient can be designed to be infinitely large. We doubt the validity of this coefficient as a reasonable ME effect index and consider three more ME coefficients, namely the electric charge ME coefficient, the voltage ME coefficient, and the static electric energy ME coefficient. We note that the theoretical ultimate value of the static electric energy ME coefficient is finite and might be a more proper measure of ME effect.

The theoretical ultimate magnetoelectric coefficients of magnetoelectric composites by optimization design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, H.-L.; Liu, B., E-mail: liubin@tsinghua.edu.cn

2014-03-21

This paper investigates what is the largest magnetoelectric (ME) coefficient of ME composites, and how to realize it. From the standpoint of energy conservation, a theoretical analysis is carried out on an imaginary lever structure consisting of a magnetostrictive phase, a piezoelectric phase, and a rigid lever. This structure is a generalization of various composite layouts for optimization on ME effect. The predicted theoretical ultimate ME coefficient plays a similar role as the efficiency of ideal heat engine in thermodynamics, and is used to evaluate the existing typical ME layouts, such as the parallel sandwiched layout and the serial layout.more » These two typical layouts exhibit ME coefficient much lower than the theoretical largest values, because in the general analysis the stress amplification ratio and the volume ratio can be optimized independently and freely, but in typical layouts they are dependent or fixed. To overcome this shortcoming and achieve the theoretical largest ME coefficient, a new design is presented. In addition, it is found that the most commonly used electric field ME coefficient can be designed to be infinitely large. We doubt the validity of this coefficient as a reasonable ME effect index and consider three more ME coefficients, namely the electric charge ME coefficient, the voltage ME coefficient, and the static electric energy ME coefficient. We note that the theoretical ultimate value of the static electric energy ME coefficient is finite and might be a more proper measure of ME effect.« less

[Marketing of medicinal products in the European Community. The Mutual Recognition and Decentralised Procedures].

PubMed

Bachmann, Peter

2008-07-01

The Mutual Recognition Procedure (MRP) and the Decentralised Procedure (DCP), which were first established in late 2005, can be regarded as the backbone for marketing authorisation of medicinal products in the European Community (EC) and the European Economic Area (EEA). Both procedures are compared and advantages and disadvantages are discussed. However, the focus is more related to current developments than the detailed comparison of both procedures. The role of the Coordination Group for Mutual Recognition and Decentralised Procedures-Human (CMD(h)) and the decision making process in relation to the MRP and DCP is also discussed.

Comparison of Procedures for Dual and Triple Closely Spaced Parallel Runways

NASA Technical Reports Server (NTRS)

Verma, Savita; Ballinger, Deborah; Subramanian Shobana; Kozon, Thomas

2012-01-01

A human-in-the-loop high fidelity flight simulation experiment was conducted, which investigated and compared breakout procedures for Very Closely Spaced Parallel Approaches (VCSPA) with two and three runways. To understand the feasibility, usability and human factors of two and three runway VCSPA, data were collected and analyzed on the dependent variables of breakout cross track error and pilot workload. Independent variables included number of runways, cause of breakout and location of breakout. Results indicated larger cross track error and higher workload using three runways as compared to 2-runway operations. Significant interaction effects involving breakout cause and breakout location were also observed. Across all conditions, cross track error values showed high levels of breakout trajectory accuracy and pilot workload remained manageable. Results suggest possible avenues of future adaptation for adopting these procedures (e.g., pilot training), while also showing potential promise of the concept.

Comparison between suture anchor and transosseous suture for the modified-Broström procedure.

PubMed

Cho, Byung-Ki; Kim, Yong-Min; Kim, Dong-Soo; Choi, Eui-Sung; Shon, Hyun-Chul; Park, Kyoung-Jin

2012-06-01

This prospective, randomized study was conducted to compare clinical outcomes of the modified Broström procedure using suture anchor or transosseous suture technique for chronic ankle instability. Forty patients were followed for more than 2 years after modified Broström procedure. Twenty procedures using a suture anchor and 20 procedures using a transosseous suture were performed by one surgeon. The clinical evaluation consisted of the Karlsson scale and the Sefton grading system. Talar tilt and anterior talar translation were measured on anterior and varus stress radiographs. The Karlsson scale had improved significantly to 90.8 points in the suture anchor group, and to 89.2 points in the transosseous suture group. According to Sefton grading system, 18 patients (90%) in suture anchor group and 17 patients (85%) in transosseous suture group achieved satisfactory results. The talar tilt angle and anterior talar translation improved significantly to 5.9 degrees and 4.2 mm in suture anchor group, and to 5.4 degrees and 4.1 mm in transosseous suture group, respectively. No significant differences existed in clinical and functional outcomes between the two techniques for ligament reattachment. Both modified Broström procedures using the suture anchor and transosseous suture seem to be effective treatment methods for chronic lateral ankle instability.

Selecting Evaluation Comparison Groups: A Cluster Analytic Approach.

ERIC Educational Resources Information Center

Davis, Todd Mclin; McLean, James E.

A persistent problem in the evaluation of field-based projects is the lack of no-treatment comparison groups. Frequently, potential comparison groups are confounded by socioeconomic, racial, or other factors. Among the possible methods for dealing with this problem are various matching procedures, but they are cumbersome to use with multiple…

Engineering Ultimate Self-Protection in Autonomic Agents for Space Exploration Missions

NASA Technical Reports Server (NTRS)

Sterritt, Roy; Hinchey, Mike

2005-01-01

NASA's Exploration Initiative (EI) will push space exploration missions to the limit. Future missions will be required to be self-managing as well as self-directed, in order to meet the challenges of human and robotic space exploration. We discuss security and self protection in autonomic agent based-systems, and propose the ultimate self-protection mechanism for such systems-self-destruction. Like other metaphors in Autonomic Computing, this is inspired by biological systems, and is the analog of biological apoptosis. Finally, we discus the role it might play in future NASA space exploration missions.

A statistically robust EEG re-referencing procedure to mitigate reference effect

PubMed Central

Lepage, Kyle Q.; Kramer, Mark A.; Chu, Catherine J.

2014-01-01

Background The electroencephalogram (EEG) remains the primary tool for diagnosis of abnormal brain activity in clinical neurology and for in vivo recordings of human neurophysiology in neuroscience research. In EEG data acquisition, voltage is measured at positions on the scalp with respect to a reference electrode. When this reference electrode responds to electrical activity or artifact all electrodes are affected. Successful analysis of EEG data often involves re-referencing procedures that modify the recorded traces and seek to minimize the impact of reference electrode activity upon functions of the original EEG recordings. New method We provide a novel, statistically robust procedure that adapts a robust maximum-likelihood type estimator to the problem of reference estimation, reduces the influence of neural activity from the re-referencing operation, and maintains good performance in a wide variety of empirical scenarios. Results The performance of the proposed and existing re-referencing procedures are validated in simulation and with examples of EEG recordings. To facilitate this comparison, channel-to-channel correlations are investigated theoretically and in simulation. Comparison with existing methods The proposed procedure avoids using data contaminated by neural signal and remains unbiased in recording scenarios where physical references, the common average reference (CAR) and the reference estimation standardization technique (REST) are not optimal. Conclusion The proposed procedure is simple, fast, and avoids the potential for substantial bias when analyzing low-density EEG data. PMID:24975291

22 CFR 123.9 - Country of ultimate destination and approval of reexports or retransfers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ARMS REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.9 Country of ultimate destination... the Directorate of Defense Trade Controls must be obtained before reselling, transferring, reexporting, retransferring, transshipping, or disposing of a defense article to any end-user, end-use, or destination other...

The Case for Laboratory Developed Procedures

PubMed Central

Sabatini, Linda M.; Tsongalis, Gregory J.; Caliendo, Angela M.; Olsen, Randall J.; Ashwood, Edward R.; Bale, Sherri; Benirschke, Robert; Carlow, Dean; Funke, Birgit H.; Grody, Wayne W.; Hayden, Randall T.; Hegde, Madhuri; Lyon, Elaine; Pessin, Melissa; Press, Richard D.; Thomson, Richard B.

2017-01-01

An explosion of knowledge and technology is revolutionizing medicine and patient care. Novel testing must be brought to the clinic with safety and accuracy, but also in a timely and cost-effective manner, so that patients can benefit and laboratories can offer testing consistent with current guidelines. Under the oversight provided by the Clinical Laboratory Improvement Amendments, laboratories have been able to develop and optimize laboratory procedures for use in-house. Quality improvement programs, interlaboratory comparisons, and the ability of laboratories to adjust assays as needed to improve results, utilize new sample types, or incorporate new mutations, information, or technologies are positive aspects of Clinical Laboratory Improvement Amendments oversight of laboratory-developed procedures. Laboratories have a long history of successful service to patients operating under Clinical Laboratory Improvement Amendments. A series of detailed clinical examples illustrating the quality and positive impact of laboratory-developed procedures on patient care is provided. These examples also demonstrate how Clinical Laboratory Improvement Amendments oversight ensures accurate, reliable, and reproducible testing in clinical laboratories. PMID:28815200

The ultimate state of polymeric materials and laminated and fibrous composites under asymmetric high-cycle loading

NASA Astrophysics Data System (ADS)

Golub, V. P.; Pogrebniak, A. D.; Kochetkova, E. S.

2008-01-01

The prediction of the high-cycle fatigue strength of polymeric and composite materials in asymmetric loading is considered. The problem is solved on the basis of a nonlinear model of ultimate state allowing us to describe all typical forms of the diagrams of ultimate stresses. The material constants of the model are determined from the results of fatigue tests in symmetric reversed cycling, in a single fatigue test with the minimum stress equal to zero, and in a short-term strength test. The fatigue strength characteristics of some polymers, glass-fiber laminates, glass-fiber-reinforced plastics, organic-fiber-reinforced plastics, and wood laminates in asymmetric tension-compression, bending, and torsion have been calculated and approved experimentally.

Pain Management for Gynecologic Procedures in the Office.

PubMed

Ireland, Luu Doan; Allen, Rebecca H

2016-02-01

Satisfactory pain control for women undergoing office gynecologic procedures is critical for both patient comfort and procedure success. Therefore, it is important for clinicians to be aware of the safety and efficacy of different pain control regimens. This article aimed to review the literature regarding pain control regimens for procedures such as endometrial biopsy, intrauterine device insertion, colposcopy and loop electrosurgical excisional procedure, uterine aspiration, and hysteroscopy. A search of published literature using PubMed was conducted using the following keywords: "pain" or "anesthesia." These terms were paired with the following keywords: "intrauterine device" or "IUD," "endometrial biopsy," "uterine aspiration" or "abortion," "colposcopy" or "loop electrosurgical excisional procedure" or "LEEP," "hysteroscopy" or "hysteroscopic sterilization." The search was conducted through July 2015. Articles were hand reviewed and selected by the authors for study quality. Meta-analyses and randomized controlled trials were prioritized. Although local anesthesia is commonly used for gynecologic procedures, a multimodal approach may be more effective including oral medication, a dedicated emotional support person, and visual or auditory distraction. Women who are nulliparous, are postmenopausal, have a history of dysmenorrhea, or suffer from anxiety are more likely to experience greater pain with gynecologic procedures. Evidence for some interventions exists; however, the interpretation of intervention comparisons is limited by the use of different regimens, pain measurement scales, patient populations, and procedure techniques. There are many options for pain management for office gynecologic procedures, and depending on the procedure, different modalities may work best. The importance of patient counseling and selection cannot be overstated.

Detonation energies of explosives by optimized JCZ3 procedures

NASA Astrophysics Data System (ADS)

Stiel, Leonard I.; Baker, Ernest L.

1998-07-01

Procedures for the detonation properties of explosives have been extended for the calculation of detonation energies at adiabatic expansion conditions. The use of the JCZ3 equation of state with optimized Exp-6 potential parameters leads to lower errors in comparison to JWL detonation energies than for other methods tested.

Ultimate Drivers and Proximate Correlates of Polyandry in Predatory Mites

PubMed Central

Schausberger, Peter; Patiño-Ruiz, J. David; Osakabe, Masahiro; Murata, Yasumasa; Sugimoto, Naoya; Uesugi, Ryuji; Walzer, Andreas

2016-01-01

Polyandry is more widespread than anticipated from Bateman’s principle but its ultimate (evolutionary) causes and proximate (mechanistic) correlates are more difficult to pinpoint than those of polygyny. Here, we combined mating experiments, quantification of reproductive traits and microsatellite genotyping to determine the fitness implications of polyandry in two predatory mite species, where males are highly polygynous (up to 45 fertilized females during life), whereas females range from monandry to various polyandry levels. The medium-level polyandrous (up to eight male mates possible) Neoseiulus californicus received clear direct and indirect benefits: multiply mated females produced more offspring with higher survival chances over longer times than singly mated females. In contrast, singly and multiply mated females of the low-level polyandrous (commonly two male mates at maximum) Phytoseiulus persimilis produced similar numbers of offspring having similar survival chances. In both species, multiple mating resulted in mixed offspring paternities, opening the chance for indirect fitness benefits such as enhanced genetic compatibility, complementarity and/or variability. However, the female re-mating likelihood and the paternity chance of non-first male mates were lower in P. persimilis than in N. californicus. Regarding proximate factors, in both species first mating duration and female re-mating likelihood were negatively correlated. Based on occasional fertilization failure of first male mates in P. persimilis, and mixed offspring paternities in both species, we argue that fertilization assurance and the chance to gain indirect fitness benefits are the ultimate drivers of polyandry in P. persimilis, whereas those of N. californicus are higher offspring numbers coupled with enhanced offspring viability and possibly other indirect fitness benefits. Overall, the adaptive significance and proximate events well reflected the polyandry levels. Our study provides

Ultimate Drivers and Proximate Correlates of Polyandry in Predatory Mites.

PubMed

Schausberger, Peter; Patiño-Ruiz, J David; Osakabe, Masahiro; Murata, Yasumasa; Sugimoto, Naoya; Uesugi, Ryuji; Walzer, Andreas

2016-01-01

Polyandry is more widespread than anticipated from Bateman's principle but its ultimate (evolutionary) causes and proximate (mechanistic) correlates are more difficult to pinpoint than those of polygyny. Here, we combined mating experiments, quantification of reproductive traits and microsatellite genotyping to determine the fitness implications of polyandry in two predatory mite species, where males are highly polygynous (up to 45 fertilized females during life), whereas females range from monandry to various polyandry levels. The medium-level polyandrous (up to eight male mates possible) Neoseiulus californicus received clear direct and indirect benefits: multiply mated females produced more offspring with higher survival chances over longer times than singly mated females. In contrast, singly and multiply mated females of the low-level polyandrous (commonly two male mates at maximum) Phytoseiulus persimilis produced similar numbers of offspring having similar survival chances. In both species, multiple mating resulted in mixed offspring paternities, opening the chance for indirect fitness benefits such as enhanced genetic compatibility, complementarity and/or variability. However, the female re-mating likelihood and the paternity chance of non-first male mates were lower in P. persimilis than in N. californicus. Regarding proximate factors, in both species first mating duration and female re-mating likelihood were negatively correlated. Based on occasional fertilization failure of first male mates in P. persimilis, and mixed offspring paternities in both species, we argue that fertilization assurance and the chance to gain indirect fitness benefits are the ultimate drivers of polyandry in P. persimilis, whereas those of N. californicus are higher offspring numbers coupled with enhanced offspring viability and possibly other indirect fitness benefits. Overall, the adaptive significance and proximate events well reflected the polyandry levels. Our study provides a

22 CFR 123.9 - Country of ultimate destination and approval of reexports or retransfers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... ARMS REGULATIONS LICENSES FOR THE EXPORT OF DEFENSE ARTICLES § 123.9 Country of ultimate destination... the Directorate of Defense Trade Controls must be obtained before reselling, transferring, transshipping, or disposing of a defense article to any end user, end use or destination other than as stated on...

RNAV STAR Procedural Adherence

NASA Technical Reports Server (NTRS)

Stewart, Michael J.; Matthews, Bryan L.

2017-01-01

In this exploratory archival study we mined the performance of 24 major US airports area navigation standard terminal arrival routes (RNAV STARs) over the preceding three years. Overlaying radar track data on top of RNAV STAR routes provided a comparison between aircraft flight paths and the waypoint positions and altitude restrictions. NASA Ames Supercomputing resources were utilized to perform the data mining and processing. We investigated STARs by lateral transition path (full-lateral), vertical restrictions (full-lateral/full-vertical), and skipped waypoints (skips). In addition, we graphed altitudes and their frequencies of occurrence for altitude restrictions. Full-lateral compliance was generally greater than Full-lateral/full-vertical, but the delta between the rates was not always consistent. Full-lateral/full-vertical usage medians of the 2016 procedures ranged from 0 in KDEN (Denver) to 21 in KMEM (Memphis). Waypoint skips ranged from 0 to nearly 100 for specific waypoints. Altitudes restrictions were sometimes missed by systemic amounts in 1000 ft. increments from the restriction, creating multi-modal distributions. Other times, altitude misses looked to be more normally distributed around the restriction. This work is a preliminary investigation into the objective performance of instrument procedures and provides a framework to track how procedural concepts and design intervention function. In addition, this tool may aid in providing acceptability metrics as well as risk assessment information.

The ultimate legs of Chilopoda (Myriapoda): a review on their morphological disparity and functional variability

PubMed Central

Kenning, Matthes; Müller, Carsten H.G.

2017-01-01

The arthropodium is the key innovation of arthropods. Its various modifications are the outcome of multiple evolutionary transformations, and the foundation of nearly endless functional possibilities. In contrast to hexapods, crustaceans, and even chelicerates, the spectrum of evolutionary transformations of myriapod arthropodia is insufficiently documented and rarely scrutinized. Among Myriapoda, Chilopoda (centipedes) are characterized by their venomous forcipules—evolutionarily transformed walking legs of the first trunk segment. In addition, the posterior end of the centipedes’ body, in particular the ultimate legs, exhibits a remarkable morphological heterogeneity. Not participating in locomotion, they hold a vast functional diversity. In many centipede species, elongation and annulation in combination with an augmentation of sensory structures indicates a functional shift towards a sensory appendage. In other species, thickening, widening and reinforcement with a multitude of cuticular protuberances and glandular systems suggests a role in both attack and defense. Moreover, sexual dimorphic characteristics indicate that centipede ultimate legs play a pivotal role in intraspecific communication, mate finding and courtship behavior. We address ambiguous identifications and designations of podomeres in order to point out controversial aspects of homology and homonymy. We provide a broad summary of descriptions, illustrations, ideas and observations published in past 160 years, and propose that studying centipede ultimate legs is not only essential in itself for filling gaps of knowledge in descriptive morphology, but also provides an opportunity to explore diverse pathways of leg transformations within Myriapoda. PMID:29158971

Some Physics Constraints on Ultimate Achievement in Track and Field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frohlich, Cliff

2009-02-06

World records in track and field have improved remarkably throughout the last 100 years; however, in several events physics places quite strict limitations on ultimate performance. For example, analysis suggests that records in broad jump and pole vault have approached their optimum possible values. Physical constraints are more subtle for events such as javelin, high jump, and the distance races, and thus there may be opportunities for “breakthroughs” in current records. Considering that there is enormous cultural interest and economic expenditure on sports, for most events the level of scientific analysis isn’t very high. This presents a research opportunity formore » fans who are engineers or physicists.« less

Randomized Comparison of 3 High-Level Disinfection and Sterilization Procedures for Duodenoscopes.

PubMed

Snyder, Graham M; Wright, Sharon B; Smithey, Anne; Mizrahi, Meir; Sheppard, Michelle; Hirsch, Elizabeth B; Chuttani, Ram; Heroux, Riley; Yassa, David S; Olafsdottir, Lovisa B; Davis, Roger B; Anastasiou, Jiannis; Bapat, Vijay; Bidari, Kiran; Pleskow, Douglas K; Leffler, Daniel; Lane, Benjamin; Chen, Alice; Gold, Howard S; Bartley, Anthony; King, Aleah D; Sawhney, Mandeep S

2017-10-01

Duodenoscopes have been implicated in the transmission of multidrug-resistant organisms (MDRO). We compared the frequency of duodenoscope contamination with MDRO or any other bacteria after disinfection or sterilization by 3 different methods. We performed a single-center prospective randomized study in which duodenoscopes were randomly reprocessed by standard high-level disinfection (sHLD), double high-level disinfection (dHLD), or standard high-level disinfection followed by ethylene oxide gas sterilization (HLD/ETO). Samples were collected from the elevator mechanism and working channel of each duodenoscope and cultured before use. The primary outcome was the proportion of duodenoscopes with an elevator mechanism or working channel culture showing 1 or more MDRO; secondary outcomes included the frequency of duodenoscope contamination with more than 0 and 10 or more colony-forming units (CFU) of aerobic bacterial growth on either sampling location. After 3 months of enrollment, the study was closed because of the futility; we did not observe sufficient events to evaluate the primary outcome. Among 541 duodenoscope culture events, 516 were included in the final analysis. No duodenoscope culture in any group was positive for MDRO. Bacterial growth of more than 0 CFU was noted in 16.1% duodenoscopes in the sHLD group, 16.0% in the dHLD group, and 22.5% in the HLD/ETO group (P = .21). Bacterial growth or 10 or more CFU was noted in 2.3% of duodenoscopes in the sHLD group, 4.1% in the dHLD group, and 4.2% in the HLD/ETO group (P = .36). MRDOs were cultured from 3.2% of pre-procedure rectal swabs and 2.5% of duodenal aspirates. In a comparison of duodenoscopes reprocessed by sHLD, dHLD, or HLD/ETO, we found no significant differences between groups for MDRO or bacteria contamination. Enhanced disinfection methods (dHLD or HLD/ETO) did not provide additional protection against contamination. However, insufficient events occurred to assess our primary study end

Integral flange design program. [procedure for computing stresses

NASA Technical Reports Server (NTRS)

Wilson, J. F.

1974-01-01

An automated interactive flange design program utilizing an electronic desk top calculator is presented. The program calculates the operating and seating stresses for circular flanges of the integral or optional type subjected to internal pressure. The required input information is documented. The program provides an automated procedure for computing stresses in selected flange geometries for comparison to the allowable code values.

Ultimate strength capacity of a square hollow section filled with fibrous foamed concrete

NASA Astrophysics Data System (ADS)

Amirah Azra Khairuddin, Siti; Rahman, Norashidah Abd; Jamaluddin, Norwati; Jaini, Zainorizuan Mohd; Ali, Noorwirdawati

2017-11-01

Concrete-filled sections used as building columns have become popular due to their architectural and structural elements. In recent years, there has been a renewed call for the improvement of materials used as concrete to fill the composite columns. Among these materials, foamed concrete has received great attention due to its structural characteristics and its potential as a construction material used in hollow sections. However, its behaviors as infill material in a hollow section, such as its strength and failure mode, should be investigated. In this study, experimental research was conducted to compare the experimental and theoretical values of its ultimate strength capacity. Eight specimens of hollow steel sections with two different thicknesses were filled with fibrous foamed concrete and then subjected to compression load. The obtained results were compared with those obtained from a hollow section with the same thicknesses, but were filled with normal foamed concrete. Results show that the ultimate strength capacity of the experimental value is the same as that of the theoretical value based on Eurocode 4. The largest percentage values between theoretical and experimental results for thicknesses of 2 and 4 mm are 58% and 55%, respectively.

Surface cleanliness measurement procedure

DOEpatents

Schroder, Mark Stewart; Woodmansee, Donald Ernest; Beadie, Douglas Frank

2002-01-01

A procedure and tools for quantifying surface cleanliness are described. Cleanliness of a target surface is quantified by wiping a prescribed area of the surface with a flexible, bright white cloth swatch, preferably mounted on a special tool. The cloth picks up a substantial amount of any particulate surface contamination. The amount of contamination is determined by measuring the reflectivity loss of the cloth before and after wiping on the contaminated system and comparing that loss to a previous calibration with similar contamination. In the alternative, a visual comparison of the contaminated cloth to a contamination key provides an indication of the surface cleanliness.

Solvent immersion imprint lithography: A high-performance, semi-automated procedure

PubMed Central

Liyu, D. A.; Canul, A. J.; Vasdekis, A. E.

2017-01-01

We expand upon our recent, fundamental report on solvent immersion imprint lithography (SIIL) and describe a semi-automated and high-performance procedure for prototyping polymer microfluidics and optofluidics. The SIIL procedure minimizes manual intervention through a cost-effective (∼$200) and easy-to-assemble apparatus. We analyze the procedure's performance specifically for Poly (methyl methacrylate) microsystems and report repeatable polymer imprinting, bonding, and 3D functionalization in less than 5 min, down to 8 μm resolutions and 1:1 aspect ratios. In comparison to commercial approaches, the modified SIIL procedure enables substantial cost reductions, a 100-fold reduction in imprinting force requirements, as well as a more than 10-fold increase in bonding strength. We attribute these advantages to the directed polymer dissolution that strictly localizes at the polymer-solvent interface, as uniquely offered by SIIL. The described procedure opens new desktop prototyping opportunities, particularly for non-expert users performing live-cell imaging, flow-through catalysis, and on-chip gas detection. PMID:28798847

An iterative transformation procedure for numerical solution of flutter and similar characteristics-value problems

NASA Technical Reports Server (NTRS)

Gossard, Myron L

1952-01-01

An iterative transformation procedure suggested by H. Wielandt for numerical solution of flutter and similar characteristic-value problems is presented. Application of this procedure to ordinary natural-vibration problems and to flutter problems is shown by numerical examples. Comparisons of computed results with experimental values and with results obtained by other methods of analysis are made.

Discussion of the Method to Determine the Ultimate Bearing Capacity of Soil Foundation

NASA Astrophysics Data System (ADS)

Du, Peng; Liu, Xiaoling; Zhang, Yangfu

2017-12-01

Combining literature examples, this paper has carried out Contrastive analysis of the theoretical formula method and finite element method about the ultimate bearing capacity of foundation, To verify rationality and superiority of the incremental load method in finite element ABAQUS in solving the bearing capacity of foundation soil. The study can provide certain reference for practical engineering calculation and analysis of foundation bearing capacity.

Lava ultimate resin nano ceramic for CAD/ CAM: customization case study.

PubMed

Koller, M; Arnetzl, G V; Holly, L; Arnetzl, G

2012-01-01

Lava Ultimate Resin Nano Ceramic (RNC) blocks are innovative new CAD/CAM materials that make it possible to achieve superior esthetic results in easy steps. The blocks are made of nano ceramic particles embedded in a highly cured resin matrix. Therefore, composite materials can be used to characterize and adjust resin nano ceramic restorations after milling. The milled RNC restorations can be individualized intra-orally or extra-orally, either before or after insertion. Unlike conventional ceramic restorations, customization and glaze firing is neither necessary nor possible with RNC restorations. This opens up the opportunity for intraoral individualization and adaptation of the restorations.

Lumley's PODT definition of large eddies and a trio of numerical procedures. [Proper Orthogonal Decomposition Theorem

NASA Technical Reports Server (NTRS)

Payne, Fred R.

1992-01-01

Lumley's 1967 Moscow paper provided, for the first time, a completely rational definition of the physically-useful term 'large eddy', popular for a half-century. The numerical procedures based upon his results are: (1) PODT (Proper Orthogonal Decomposition Theorem), which extracts the Large Eddy structure of stochastic processes from physical or computer simulation two-point covariances, and 2) LEIM (Large-Eddy Interaction Model), a predictive scheme for the dynamical large eddies based upon higher order turbulence modeling. Earlier Lumley's work (1964) forms the basis for the final member of the triad of numerical procedures: this predicts the global neutral modes of turbulence which have surprising agreement with both structural eigenmodes and those obtained from the dynamical equations. The ultimate goal of improved engineering design tools for turbulence may be near at hand, partly due to the power and storage of 'supermicrocomputer' workstations finally becoming adequate for the demanding numerics of these procedures.

A Procedure for Testing the Difference between Effect Sizes.

ERIC Educational Resources Information Center

Lambert, Richard G.; Flowers, Claudia

A special case of the homogeneity of effect size test, as applied to pairwise comparisons of standardized mean differences, was evaluated. Procedures for comparing pairs of pretest to posttest effect sizes, as well as pairs of treatment versus control group effect sizes, were examined. Monte Carlo simulation was used to generate Type I error rates…

Shortwave Radiometer Calibration Methods Comparison and Resulting Solar Irradiance Measurement Differences: A User Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habte, Aron; Sengupta, Manajit; Andreas, Afshin

Banks financing solar energy projects require assurance that these systems will produce the energy predicted. Furthermore, utility planners and grid system operators need to understand the impact of the variable solar resource on solar energy conversion system performance. Accurate solar radiation data sets reduce the expense associated with mitigating performance risk and assist in understanding the impacts of solar resource variability. The accuracy of solar radiation measured by radiometers depends on the instrument performance specification, installation method, calibration procedure, measurement conditions, maintenance practices, location, and environmental conditions. This study addresses the effect of different calibration methods provided by radiometric calibrationmore » service providers, such as NREL and manufacturers of radiometers, on the resulting calibration responsivity. Some of these radiometers are calibrated indoors and some outdoors. To establish or understand the differences in calibration methodology, we processed and analyzed field-measured data from these radiometers. This study investigates calibration responsivities provided by NREL's broadband outdoor radiometer calibration (BORCAL) and a few prominent manufacturers. The BORCAL method provides the outdoor calibration responsivity of pyranometers and pyrheliometers at 45 degree solar zenith angle, and as a function of solar zenith angle determined by clear-sky comparisons with reference irradiance. The BORCAL method also employs a thermal offset correction to the calibration responsivity of single-black thermopile detectors used in pyranometers. Indoor calibrations of radiometers by their manufacturers are performed using a stable artificial light source in a side-by-side comparison between the test radiometer under calibration and a reference radiometer of the same type. In both methods, the reference radiometer calibrations are traceable to the World Radiometric Reference (WRR). These

More than 95% completeness of reported procedures in the population-based Dutch Arthroplasty Register

PubMed Central

van Steenbergen, Liza N; Spooren, Anneke; van Rooden, Stephanie M; van Oosterhout, Frank J; Morrenhof, Jan W; Nelissen, Rob G H H

2015-01-01

Background and purpose A complete and correct national arthroplasty register is indispensable for the quality of arthroplasty outcome studies. We evaluated the coverage, completeness, and validity of the Dutch Arthroplasty Register (LROI) for hip and knee arthroplasty. Patients and methods The LROI is a nationwide population-based registry with information on joint arthroplasties in the Netherlands. Completeness of entered procedures was validated in 2 ways: (1) by comparison with the number of reimbursements for arthroplasty surgeries (Vektis database), and (2) by comparison with data from hospital information systems (HISs). The validity was examined by conducting checks on missing or incorrectly coded values in the LROI. Results The LROI contains over 300,000 hip and knee arthroplasties performed since 2007. Coverage of all Dutch hospitals (n = 100) was reached in 2012. Completeness of registered procedures was 98% for hip arthroplasty and 96% for knee arthroplasty in 2012, based on Vektis data. Based on comparison with data from the HIS, completeness of registered procedures was 97% for primary total hip arthroplasty and 96% for primary knee arthroplasty in 2013. Completeness of revision arthroplasty was 88% for hips and 90% for knees in 2013. The proportion of missing or incorrectly coded values of variables was generally less than 0.5%, except for encrypted personal identity numbers (17% of which were missing) and ASA scores (10% of which were missing). Interpretation The LROI now contains over 300,000 hip and knee arthroplasty procedures, with coverage of all hospitals. It has a good level of completeness (i.e. more than 95% for primary hip and knee arthroplasty procedures in 2012 and 2013) and the database has high validity. PMID:25758646

Mode-Stirred Method Implementation for HIRF Susceptibility Testing and Results Comparison with Anechoic Method

NASA Technical Reports Server (NTRS)

Nguyen, Truong X.; Ely, Jay J.; Koppen, Sandra V.

2001-01-01

This paper describes the implementation of mode-stirred method for susceptibility testing according to the current DO-160D standard. Test results on an Engine Data Processor using the implemented procedure and the comparisons with the standard anechoic test results are presented. The comparison experimentally shows that the susceptibility thresholds found in mode-stirred method are consistently higher than anechoic. This is consistent with the recent statistical analysis finding by NIST that the current calibration procedure overstates field strength by a fixed amount. Once the test results are adjusted for this value, the comparisons with the anechoic results are excellent. The results also show that test method has excellent chamber to chamber repeatability. Several areas for improvements to the current procedure are also identified and implemented.

A comparison of techniques for myelomeningocele defect closure in the neonatal period.

PubMed

Kobraei, Edward M; Ricci, Joseph A; Vasconez, Henry C; Rinker, Brian D

2014-09-01

Numerous techniques have been described for repair of myelomeningoceles, but outcome data is scarce. A retrospective review was performed in 32 consecutive patients who underwent neonatal myelomeningocele repair and extra-dural closure to determine the influence of repair type on outcome. All procedures for myelomeningocele closure were classified into one of three groups, which included primary closure, myocutaneous flaps, and fasciocutaneous flaps. Defect size ranged from 1 to 48 cm(2). Primary skin closure was performed in 3 patients, fasciocutaneous flaps in 13 patients, and myocutaneous flaps in 16 patients. The overall complication rate was 18%. No difference in the complication rates among the primary closure, myocutaneous, and fasciocutaneous flap groups was observed in our analysis. While not statistically significant, our data documents an association of fasciocutaneous flaps with postoperative complications that were not evident with primary skin closure or myocutaneous flaps (odds ratio 3.8; p = 0.15). The occurrence of one or more complications was associated with a longer hospital stay. Myocutaneous flaps provide a secure repair and should be considered for smaller myelomeningocele defects in addition to the larger defects where they are more traditionally used. We propose a tissue-based classification of closure techniques strictly for multi-institution outcome comparison that may ultimately inform clinical decision-making.

Spatial adaptation procedures on tetrahedral meshes for unsteady aerodynamic flow calculations

NASA Technical Reports Server (NTRS)

Rausch, Russ D.; Batina, John T.; Yang, Henry T. Y.

1993-01-01

Spatial adaptation procedures for the accurate and efficient solution of steady and unsteady inviscid flow problems are described. The adaptation procedures were developed and implemented within a three-dimensional, unstructured-grid, upwind-type Euler code. These procedures involve mesh enrichment and mesh coarsening to either add points in high gradient regions of the flow or remove points where they are not needed, respectively, to produce solutions of high spatial accuracy at minimal computational cost. A detailed description of the enrichment and coarsening procedures are presented and comparisons with experimental data for an ONERA M6 wing and an exact solution for a shock-tube problem are presented to provide an assessment of the accuracy and efficiency of the capability. Steady and unsteady results, obtained using spatial adaptation procedures, are shown to be of high spatial accuracy, primarily in that discontinuities such as shock waves are captured very sharply.

Spatial adaptation procedures on tetrahedral meshes for unsteady aerodynamic flow calculations

NASA Technical Reports Server (NTRS)

Rausch, Russ D.; Batina, John T.; Yang, Henry T. Y.

1993-01-01

Spatial adaptation procedures for the accurate and efficient solution of steady and unsteady inviscid flow problems are described. The adaptation procedures were developed and implemented within a three-dimensional, unstructured-grid, upwind-type Euler code. These procedures involve mesh enrichment and mesh coarsening to either add points in high gradient regions of the flow or remove points where they are not needed, respectively, to produce solutions of high spatial accuracy at minimal computational cost. The paper gives a detailed description of the enrichment and coarsening procedures and presents comparisons with experimental data for an ONERA M6 wing and an exact solution for a shock-tube problem to provide an assessment of the accuracy and efficiency of the capability. Steady and unsteady results, obtained using spatial adaptation procedures, are shown to be of high spatial accuracy, primarily in that discontinuities such as shock waves are captured very sharply.

Towards the Ultimate Membranes: Two-dimensional Nanoporous Materials and Films.

PubMed

Agrawal, Kumar Varoon

2018-05-30

The energy-efficient separation of molecules has been a popular topic in chemistry and chemical engineering as a consequence of the large energy-footprint of separation processes in the chemical industry. The Laboratory of Advanced Separations (LAS) at EPFL, led by Prof. Kumar Varoon Agrawal, is focused to develop next-generation, high-performance membranes that can improve the energy efficiency of hydrogen purification, carbon capture, hydrocarbon and water purification. For this, LAS is seeking to develop the ultimate nanoporous membranes, those with a thickness of 1 nm and possessing an array of size-selective nanopores. In this article, the research activities at LAS, especially in the bottom-up and top-down synthesis of chemically and thermally stable, nanoporous two-dimensional materials and membranes are discussed.

The ultimate challenge of cloacal exstrophy.

PubMed

Schober, Justine M; Carmichael, Polly A; Hines, Melissa; Ransley, Philip G

2002-01-01

Our review addresses the various system abnormalities associated with cloacal exstrophy and revisits the question of gender assignment. Gender assignment decisions and psychological aspects of gender issues have become the "ultimate challenge." Exploration of gender identity, gender role behavior and sexual orientation has just begun. A comprehensive literature review was performed with all world literature regarding the current management of cloacal exstrophy. Research focused on management principles, outcomes and documentation of concurrent anomalies. We also describe original research evaluating gender identity in our own series of patients raised as girls to illustrate the challenge of treatment and augment the available literature, which is scant. Abnormalities of the vertebral column ranged from hemivertebra to myelomeningocele. With magnetic resonance imaging, the incidence of spinal dysraphism approached 100% and cord tethering was also more frequently recognized. For children with the short bowel syndrome, advances in antibiotic usage, and parenteral and enteral nutrition have increased the survival rate and reduced morbidity. A neurological component has been recognized for bladder function, bladder neck continence, lower extremity function and erectile capacity. Mitrofanoff-type reconstruction with bladder neck closure and continent catheterizable stoma dramatically increased continence. Diminutive or absent penis has been documented in 30% of males, and no documentation of paternity exists. The majority of females have bicornuate uterus. However, ovaries and tubes were generally normal. No reports of proven fertility exist. The strategy and timing of surgery relating to gender assignment remain controversial. A desperate need exists for research focusing on gender development and quality of life. Until that time, a cautious watchful approach may be most appropriate as our patients with cloacal exstrophy mature into adulthood.

Is Adam worth more than Eve? The financial impact of gender bias in the federal reimbursement of gynecological procedures.

PubMed

Goff, B A; Muntz, H G; Cain, J M

1997-03-01

On January 1, 1992, Congress implemented a Medicare payment system based on relative value units (RVU). The RVU multiplied by a dollar conversion factor sets the reimbursement for all procedures covered by Medicare and many other private insurers. This study was undertaken to evaluate discrepancies in federal reimbursement for gender-specific procedures. Using the December 1995 Federal Register and the regional Medicare conversion factor ($40.08/RVU), we compared the work RVU and total reimbursement of 24 groups of gender-specific surgical procedures. The groups were matched as carefully as possible so that the amount of work and level of difficulty would be similar, if not identical. Some examples of comparisons are as follows: biopsy of male vs female genitals, hysterectomy vs prostatectomy, staging for ovarian vs testicular cancer, and exenteration for cervical vs prostate cancer. In the 24 matched procedures, the male-specific procedures were reimbursed at a higher amount in 19 (79%) cases. The female-specific procedures were reimbursed at a higher amount in 3 (12%) cases (P = 0.004). There was no difference in reimbursement for two of the comparisons. Overall, we found that male-specific procedures are reimbursed at an amount which is 44% higher than female-specific procedures. Comparison of work RVU revealed that male-specific procedures were assigned higher values in 19 cases and, overall, male gender-related surgeries had work RVU that were 50% higher than female gender-related surgeries. There is significant gender bias against the Medicare reimbursement of female-specific services. This results in a lower net reimbursement for gynecologic procedures. In addition, since many private sector insurance carriers now use the resource-based relative value scale system, this gender bias is further potentiated.

On the Contribution of Curl-Free Current Patterns to the Ultimate Intrinsic Signal-to-Noise Ratio at Ultra-High Field Strength.

PubMed

Pfrommer, Andreas; Henning, Anke

2017-05-01

The ultimate intrinsic signal-to-noise ratio (SNR) is a coil independent performance measure to compare different receive coil designs. To evaluate this benchmark in a sample, a complete electromagnetic basis set is required. The basis set can be obtained by curl-free and divergence-free surface current distributions, which excite linearly independent solutions to Maxwell's equations. In this work, we quantitatively investigate the contribution of curl-free current patterns to the ultimate intrinsic SNR in a spherical head-sized model at 9.4 T. Therefore, we compare the ultimate intrinsic SNR obtained with having only curl-free or divergence-free current patterns, with the ultimate intrinsic SNR obtained from a combination of curl-free and divergence-free current patterns. The influence of parallel imaging is studied for various acceleration factors. Moreover results for different field strengths (1.5 T up to 11.7 T) are presented at specific voxel positions and acceleration factors. The full-wave electromagnetic problem is analytically solved using dyadic Green's functions. We show, that at ultra-high field strength (B 0 ⩾7T) a combination of curl-free and divergence-free current patterns is required to achieve the best possible SNR at any position in a spherical head-sized model. On 1.5- and 3T platforms, divergence-free current patterns are sufficient to cover more than 90% of the ultimate intrinsic SNR. Copyright © 2017 John Wiley & Sons, Ltd.

Crew procedures for microwave landing system operations

NASA Technical Reports Server (NTRS)

Summers, Leland G.

1987-01-01

The objective of this study was to identify crew procedures involved in Microwave Landing System (MLS) operations and to obtain a preliminary assessment of crew workload. The crew procedures were identified for three different complements of airborne equipment coupled to an autopilot. Using these three equipment complements, crew tasks were identified for MLS approaches and precision departures and compared to an ILS approach and a normal departure. Workload comparisons between the approaches and departures were made by using a task-timeline analysis program that obtained workload indexes, i.e., the radio of time required to complete the tasks to the time available. The results showed an increase in workload for the MLS scenario for one of the equipment complements. However, even this workload was within the capacity of two crew members.

Effects of different etching methods and bonding procedures on shear bond strength of orthodontic metal brackets applied to different CAD/CAM ceramic materials.

PubMed

Buyuk, S Kutalmış; Kucukekenci, Ahmet Serkan

2018-03-01

To investigate the shear bond strength (SBS) of orthodontic metal brackets applied to different types of ceramic surfaces treated with different etching procedures and bonding agents. Monolithic CAD/CAM ceramic specimens (N = 120; n = 40 each group) of feldspathic ceramic Vita Mark II, resin nanoceramic Lava Ultimate, and hybrid ceramic Vita Enamic were fabricated (14 × 12 × 3 mm). Ceramic specimens were separated into four subgroups (n = 10) according to type of surface treatment and bonding onto the ceramic surface. Within each group, four subgroups were prepared by phosphoric acid, hydrofluoric acid, Transbond XT primer, and Clearfill Ceramic primer. Mandibular central incisor metal brackets were bonded with light-cure composite. The SBS data were analyzed using three-way analysis of variance (ANOVA) and Tukey HSD tests. The highest SBS was found in the Vita Enamic group, which is a hybrid ceramic, etched with hydrofluoric acid and applied Transbond XT Adhesive primer (7.28 ± 2.49 MPa). The lowest SBS was found in the Lava Ultimate group, which is a resin nano-ceramic etched with hydrofluoric acid and applied Clearfill ceramic primer (2.20 ± 1.21 MPa). CAD/CAM material types and bonding procedures affected bond strength ( P < .05), but the etching procedure did not ( P > .05). The use of Transbond XT as a primer bonding agent resulted in higher SBS.

Patient and family attitudes regarding the practice of procedures on the newly deceased.

PubMed

Manifold, C A; Storrow, A; Rodgers, K

1999-02-01

Performance of emergency lifesaving procedures is an integral part of emergency medicine resident training. To assess attitudes of ED patients regarding the practice of procedures on the newly deceased. A descriptive survey was administered to a convenience sample of ED patients and their families at two urban military Level-1 trauma centers. Subjects were asked about their overall opinions regarding the practice of nontherapeutic procedural skills on themselves or relatives immediately after death in the ED. Subgroup analysis included the issue of advanced permission and opinions regarding procedures defined by the investigators as noninvasive (e.g., laryngeal mask airway) or invasive (e.g., cricothyrotomy). Data were analyzed descriptively and with chi-square as appropriate. For comparison of proportions, a sample size of at least 140 was chosen for an alpha of 0.05 and a beta of 0.10 to detect an effect size of 0.3. Alpha was corrected for multiple comparisons prior to the study. Three hundred seventeen surveys were collected and 88% (n = 280) were complete. Seventy-five percent (n = 290) and 70% (n = 273) of the respondents agreed to after-death procedures on themselves or their relatives, respectively. However, only 40% (n = 106) and 50% (n = 131) would allow such procedures without prior permission. Seventy-one percent (n = 189) were willing to give permission in a living will, while 85% (n = 238) indicated support of a wallet card format. There was no significant difference in permission rates when contrasting individual noninvasive and invasive procedures. Most patients are willing to have procedures performed on themselves or relatives shortly after death, yet the majority request that permission be obtained in advance. A living will or carried card would be acceptable for such permission.

[Early inflammatory response following elective abdominal aortic aneurysm repair: a comparison between endovascular procedure and conventional, open surgery].

PubMed

Marjanović, Ivan; Jevtić, Miodrag; Misović, Sidor; Vojvodić, Danilo; Zoranović, Uros; Rusović, Sinisa; Sarac, Momir; Stanojević, Ivan

2011-11-01

shorter time of treatment in the EVAR group (average 90 min) compared to the OR group (average 136 min). Also, there was a statistically significantly less blood loss in the patients operated on by the use of EVAR surgery (average 60 mL) as compared to the patients treated with OR techinique (average 495 mL), as well as a shorter postoperative hospitalization of patients in the EVAR group (average 4 days) compared to the OR group (average 8 days). The OR group was detected with a statistically significant increase of leucocytes and statistically significant fall of the number of thrombocytes in comparison with the EVAR group in all the investigated terms. A significant concentration rise of IL-2 in the OR group and concentration rise of IL-6 in the EVAR group was shown 24 hours after the procedure, whereas on the second postoperative day there was detected a significant fall of IL-6 in the EVAR group. IL-4 concentration in the OR group was significantly higher as of the third postoperative day in comparison to the EVAR group. There was no significant difference in IL-10 concentration between the groups. The EVAR techinique is a safer and less invasive and less traumatic procedure for patients than the OR of AAA. Following the EVAR, there are less inflammatory reactions in the early postoperative period as compared to the OR and therefore less possibility of the development of systemic inflammatory respons syndrome in patients treated.

Purification Procedures for Single-Wall Carbon Nanotubes

NASA Technical Reports Server (NTRS)

Gorelik, Olga P.; Nikolaev, Pavel; Arepalli, Sivaram

2001-01-01

This report summarizes the comparison of a variety of procedures used to purify carbon nanotubes. Carbon nanotube material is produced by the arc process and laser oven process. Most of the procedures are tested using laser-grown, single-wall nanotube (SWNT) material. The material is characterized at each step of the purification procedures by using different techniques including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), Raman, X-ray diffractometry (XRD), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), and high-performance liquid chromatography (HPLC). The identified impurities are amorphous and graphitic carbon, catalyst particle aggregates, fullerenes, and hydrocarbons. Solvent extraction and low-temperature annealing are used to reduce the amount of volatile hydrocarbons and dissolve fullerenes. Metal catalysts and amorphous as well as graphitic carbon are oxidized by reflux in acids including HCl, HNO3 and HF and other oxidizers such as H2O2. High-temperature annealing in vacuum and in inert atmosphere helps to improve the quality of SWNTs by increasing crystallinity and reducing intercalation.

7 CFR 1486.303 - What specific contracting procedures must be adhered to?

Code of Federal Regulations, 2010 CFR

2010-01-01

... MARKETS PROGRAM Program Operations § 1486.303 What specific contracting procedures must be adhered to? (a...) Perform some form of fee, price, or cost analysis, such as a comparison of price quotations to market...) Document the decision-making process. ...

Pairwise Multiple Comparisons in Single Group Repeated Measures Analysis.

ERIC Educational Resources Information Center

Barcikowski, Robert S.; Elliott, Ronald S.

Research was conducted to provide educational researchers with a choice of pairwise multiple comparison procedures (P-MCPs) to use with single group repeated measures designs. The following were studied through two Monte Carlo (MC) simulations: (1) The T procedure of J. W. Tukey (1953); (2) a modification of Tukey's T (G. Keppel, 1973); (3) the…

Procedures in child deaths in The Netherlands: a comparison with child death review.

PubMed

Gijzen, Sandra; Petter, Jessica; L'Hoir, Monique P; Boere-Boonekamp, Magda M; Need, Ariana

2017-01-01

Child Death Review (CDR) is a method in which every child death is systematically and multidisciplinary examined to (1) improve death statistics, (2) identify factors that give direction for prevention, (3) translate the results into possible interventions, and (4) support families. The aim of this study was to determine to what extent procedures of organizations involved in the (health) care for children in The Netherlands cover these four objectives of CDR. Organizations in the Eastern part of The Netherlands and Dutch umbrella organizations involved in child (health) care were asked to provide their protocols, guidelines or other working agreements that describe their activities and responsibilities in case of a child's death. Eighteen documents and nine interview reports were made available. For the analyses we used scorecards for each CDR objective. The procedures of Perined, the National Cot Death Study Group, Dutch Cot Death Foundation and Child Protection Service cover the largest part of the objectives of CDR. Organizations pay most attention to the translation of results into possible interventions. Family support gets the least attention in protocols, guidelines and other working agreements. Dutch organizations separately cover parts of CDR. When the procedures of organizations are combined, all CDR objectives are covered in the response to only specific groups of child deaths, i.e., perinatal deaths, Sudden Unexpected Deaths in Infants and fatal child abuse cases. Further research into the conditions that are needed for an optimal implementation of CDR in The Netherlands is necessary. This research should also evaluate the recently implemented NODOK procedure (Further Examination of the Causes of death in Children), directed to investigate unexplained deaths in minors 0-18 years old.

15 CFR Supplement No. 3 to Part 748 - BIS-711, Statement by Ultimate Consignee and Purchaser Instructions

Code of Federal Regulations, 2010 CFR

2010-01-01

...” include: contractual, franchise, distributor, wholesaler, continuing and regular individual business, etc... persons, other than employees of the ultimate consignee or purchaser, who assisted in the preparation of...

Monitoring the use and outcomes of new devices and procedures: how does coding affect what Hospital Episode Statistics contribute? Lessons from 12 emerging procedures 2006-10.

PubMed

Patrick, Hannah; Sims, Andrew; Burn, Julie; Bousfield, Derek; Colechin, Elaine; Reay, Christopher; Alderson, Neil; Goode, Stephen; Cunningham, David; Campbell, Bruce

2013-03-01

New devices and procedures are often introduced into health services when the evidence base for their efficacy and safety is limited. The authors sought to assess the availability and accuracy of routinely collected Hospital Episodes Statistics (HES) data in the UK and their potential contribution to the monitoring of new procedures. Four years of HES data (April 2006-March 2010) were analysed to identify episodes of hospital care involving a sample of 12 new interventional procedures. HES data were cross checked against other relevant sources including national or local registers and manufacturers' information. HES records were available for all 12 procedures during the entire study period. Comparative data sources were available from national (5), local (2) and manufacturer (2) registers. Factors found to affect comparisons were miscoding, alternative coding and inconsistent use of subsidiary codes. The analysis of provider coverage showed that HES is sensitive at detecting centres which carry out procedures, but specificity is poor in some cases. Routinely collected HES data have the potential to support quality improvements and evidence-based commissioning of devices and procedures in health services but achievement of this potential depends upon the accurate coding of procedures.

Ultimate Limit to the Spatial Resolution in Magnetic Imaging

NASA Astrophysics Data System (ADS)

Matthews, John; Wellstood, Frederick C.; Chatraphorn, Sojiphong

2003-03-01

Motivated by the continual improvement in the spatial resolution of source currents detected by magnetic field imaging, in particular scanning SQUID microscopy, we have determined a theoretical limit to the spatial resolution for a given set of parameters. The guiding principle here is that by adding known information (e.g. CAD diagram) about the source currents into the inversion algorithm, we reduce the number of unknown parameters and hence lower the uncertainty in the remaining parameters. We consider the ultimate limit to be the case where all the information about the system is known, except for a single parameter, e.g. the separation w of two long, straight wires each carrying a current I/2. For this particular example we find that for a current I=100;μA, with magnetic field noise Δ B=10 pT, at a standoff z=100;μm, the minimum resolvable separation is 2;μm, about an order of magnitude less than the present limit.

Applications of statistics to medical science, II overview of statistical procedures for general use.

PubMed

Watanabe, Hiroshi

2012-01-01

Procedures of statistical analysis are reviewed to provide an overview of applications of statistics for general use. Topics that are dealt with are inference on a population, comparison of two populations with respect to means and probabilities, and multiple comparisons. This study is the second part of series in which we survey medical statistics. Arguments related to statistical associations and regressions will be made in subsequent papers.

Comparison of Spectra Optia and COBE Spectra apheresis systems' performances for red blood cell exchange procedures.

PubMed

Kim, Jaehyup; Joseph, Ranjit; Matevosyan, Karen; Sarode, Ravi

2016-12-01

Spectra Optia (Terumo BCT, Lakewood, CO) was FDA approved for red blood cell exchange (RBCx) procedures in January 2014 and is expected to replace COBE spectra (Terumo BCT) very soon in the USA. The performance characteristics of these devices for Isovolemic Hemodilution (IHD-RBCx) procedure were compared in this study. A total of 114 IHD-RBCx procedures from 19 patients were analyzed. For every patient, three procedures on each device with similar pre-procedure hematocrits were compared. Pre and post procedure laboratory parameters compared were hemoglobin S (HbS), hematocrits (Hct), platelet counts and fraction of cells remaining (FCR). Statistical analysis was performed using t-test adjusted by the Holm-Bonferroni method to reduce family-wise error rate. There were no significant differences between these two devices in regards to HbS, Hct, FCR and platelet counts (p = > 0.05). However, rinseback volume (124.2 ± 8.9 ml) and normal saline replacement volume during IHD phase (296.1 ± 97.2 ml) were lower in Spectra Optia as compared to COBE Spectra (337 ± 33.8 ml and 326.6 ± 105.2 ml, p value <0.001 and 0.030 respectively). Spectra Optia had a longer run time (107.1 ± 15.9 min vs 123.8 ± 19.6 min, p value <0.001) overall. Performance characteristics of Spectra Optia for HbS, Hct and FCR were similar to COBE Spectra for IHD-RBCx. IHD-RBCx procedure on Optia required less normal saline replacement volume and rinse back volume but with overall longer procedure run time. Copyright © 2016. Published by Elsevier Ltd.

Comparison of Right and Left Upper Limb Arterial Variants in Patients Undergoing Bilateral Transradial Procedures.

PubMed

Burzotta, Francesco; Brancati, Marta Francesca; Porto, Italo; Saffioti, Silvia; Aurigemma, Cristina; Niccoli, Giampaolo; Leone, Antonio Maria; Coluccia, Valentina; Crea, Filippo; Trani, Carlo

2015-12-01

Transradial approach (TRA), when compared with transfemoral, improves the safety of percutaneous coronary procedures. Arterial axis variants are known to hinder the performance of transradial approach percutaneous coronary procedures. Data on the occurrence of arterial axis variants in the right and left arm arterial axes of individual patients are lacking. From a single-center prospective registry, we selected all patients in whom bilateral upper limb arterial anatomy was assessed based on the performance of left and right radial catheterization obtained during the same or during repeat coronary diagnostic or interventional procedure(s). The occurrence of upper right and left limb arterial axis variants was classified according to the previously described operative ABC classification. A total of 610 patients were identified. An ABC upper limb arterial axis variant was detected in 156 (25.6%) patients. Variants were right-sided only in 65 (11.0%), left-sided only in 40 (6.6%), and bilateral in 46 (7.5%) patients. Thus, arterial axis variants were significantly more common in the right side (P=0.02). Bilateral arterial variants were significantly associated with age, female sex, and valvulopathy. Both A (radial/brachial) and B (axillary/subclavian/innominate) variants exhibited concordance across the 2 sides (odds ratio, 7.2; 95% confidence interval, 4.1-12.7 and 8.0; 95% confidence interval, 2.1-30.9, respectively). The occurrence of an anatomic variant potentially hindering transradial approach coronary diagnostic or interventional procedures is bilateral in <8% of cases and is more common in the right arm. Such information may guide, during the clinical practice, the access selection in the case of repeat procedures or need for additional accesses. © 2015 American Heart Association, Inc.

A Multicenter Cohort Comparison Study of the Safety, Efficacy, and Cost of Ticagrelor Compared to Clopidogrel in Aneurysm Flow Diverter Procedures.

PubMed

Moore, Justin M; Adeeb, Nimer; Shallwani, Hussain; Gupta, Raghav; Patel, Apar S; Griessenauer, Christoph J; Youn, Roy; Siddiqui, Adnan; Ogilvy, Christopher S; Thomas, Ajith J

2017-10-01

Thromboembolic and hemorrhagic complications are among the most feared adverse events in the endovascular treatment of aneurysms, and this is particularly the case for flow diverter devices. Dual antiplatelet therapy has become standard of care; however, the safety, efficacy, and cost profiles of newer antiplatelet agents are not well characterized in the neurovascular context. To compare the safety, efficacy, and cost of one of these newer agents, ticagrelor, to the most frequently used agent, clopidogrel. A multicenter, retrospective, cohort comparison study design of consecutively treated aneurysms with flow diverter embolization device and treated with either ticagrelor or clopidogrel was performed. Data were collected on patient demographics and risk factors, procedural details, antiplatelet treatment regime, complications, and angiographic and functional outcomes. Fifty patients undergoing flow diverter device deployment and treatment with ticagrelor were compared to 53 patients undergoing flow diversion and treatment with clopidogrel. The patients' age, sex, smoking status, aneurismal morphology and size, and procedural details did not differ between the 2 groups; neither did the rate of thromboembolic and hemorrhagic complications, angiographical, and functional outcomes. Ticagrelor was more expensive when compared to clopidogrel. Ticagrelor is a safe and effective agent for prevention of thromboembolic complications following flow diverter deployment when compared to clopidogrel. However, ticagrelor remains significantly more expensive than clopidogrel, and, thus, we would advise ticagrelor be reserved for patients who are hyporesponsive to clopidogrel. Copyright © 2017 by the Congress of Neurological Surgeons

78 FR 14457 - Guidelines Establishing Test Procedures for the Analysis of Pollutants Under the Clean Water Act...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... Establishing Test Procedures for the Analysis of Pollutants Under the Clean Water Act; Analysis and Sampling... for use as an alternative oil and grease method. Some comments were specific to the sampling...-side comparison using the specific procedures (e.g. sampling frequency, number of samples, QA/QC, and...

Health care quality, access, cost, workforce, and surgical education: the ultimate perfect storm.

PubMed

Schwartz, Marshall Z

2012-01-01

The discussions on health care reform over the past two years have focused on cost containment while trying to maintain quality of care. Focusing on just cost and quality unfortunately does not address other very important factors that impact on our health care delivery system. Availability of a well-trained workforce, maintaining the sophisticated medical/surgical education system, and ultimately access to quality care by the public are critical to maintaining and enhancing our health care delivery system. Unfortunately, all five of these components are under at risk. Thus, we have evolving the ultimate perfect storm affecting our health care delivery system. Although not ideal and given the uniqueness of our population and their expectations, our current delivery system is excellent compared to other countries. However, the cost of our current system is rising at an alarming rate. Currently, health care consumes 17% of our gross domestic product. If our system is not revised this will continue to rise and by 2025 it will consume 48%. The dilemma, given the current state of our overall economy and rising debt, is how to address this major problem. Unfortunately, the Affordable Care Act, which is now law, does not address most of the issues and the cost was initially grossly under estimated. Furthermore, the law does not address the issues of workforce, maintaining our medical education system or ultimately, access. A major revision of our system will be necessary to truly create a system that protects and enhances all five of the components of our health care delivery system. To effectively accomplish this will require addressing those issues that lead to wasteful spending and diversion of our health care dollars to profit instead of care. Improved and efficient delivery systems that reduce complications, reduction of duplication of tertiary and quaternary programs or services within the same markets (i.e. regionalization of care), health insurance reform, and

Comparing preference assessments: selection- versus duration-based preference assessment procedures.

PubMed

Kodak, Tiffany; Fisher, Wayne W; Kelley, Michael E; Kisamore, April

2009-01-01

In the current investigation, the results of a selection- and a duration-based preference assessment procedure were compared. A Multiple Stimulus With Replacement (MSW) preference assessment [Windsor, J., Piché, L. M., & Locke, P. A. (1994). Preference testing: A comparison of two presentation methods. Research in Developmental Disabilities, 15, 439-455] and a variation of a Free-Operant (FO) preference assessment procedure [Roane, H. S., Vollmer, T. R., Ringdahl, J. E., & Marcus, B. A. (1998). Evaluation of a brief stimulus preference assessment. Journal of Applied Behavior Analysis, 31, 605-620] were conducted with four participants. A reinforcer assessment was conducted to determine which preference assessment procedure identified the item that produced the highest rates of responding. The items identified as most highly preferred were different across preference assessment procedures for all participants. Results of the reinforcer assessment showed that the MSW identified the item that functioned as the most effective reinforcer for two participants.

Primary Definitive Procedure versus Conventional Three-staged Procedure for the Management of Low-type Anorectal Malformation in Females: A Randomized Controlled Trial.

PubMed

Gupta, Alisha; Agarwala, Sandeep; Sreenivas, Vishnubhatla; Srinivas, Madhur; Bhatnagar, Veereshwar

2017-01-01

Females with Krickenbeck low-type anorectal malformations - vestibular fistula (VF) and perineal fistula (PF) - are managed either by a primary definitive or conventional three-staged approach. Ultimate outcome in these children may be affected by wound dehiscence leading to healing by fibrosis. Most of the literature favors one approach over other based on retrospective analysis of their outcomes. Whether a statistically significant difference in wound dehiscence rates between these approaches exists needed to be seen. A randomized controlled trial for girls <14 years with VF or PF was done. Random tables were used to randomize 33 children to Group I (primary procedure) and 31 to Group II (three-staged procedure). Statistical analysis was done for significance of difference ( P < 0.05) in the primary outcome (wound dehiscence) and secondary outcomes (immediate and early postoperative complications). Of the 64 children randomized, 54 (84%) had VF. Both groups were comparable in demography, clinical profile and age at surgery. The incidence of wound dehiscence (39.4% vs. 18.2%; P = 0.04), immediate postoperative complications (51.5% vs. 12.9%; P = 0.001), and early postoperative complications (42.4% vs. 12.9%; P = 0.01) was significantly higher in Group I as compared to Group II. Six of 13 children (46.2%) with dehiscence in Group I required a diverting colostomy to be made. Females with VF or PF undergoing primary definitive procedure have a significantly higher incidence of wound dehiscence ( P = 0.04), immediate ( P = 0.001) and early postoperative complications ( P = 0.01).

LASERS: Ultimate energy parameters of the radiation emitted from neodymium-glass laser systems

NASA Astrophysics Data System (ADS)

Eshmemet'eva, E. V.; Korolev, V. I.; Mesnyankin, E. P.; Serebryakov, V. A.; Shashkin, V. V.; Yashin, V. E.

1992-09-01

An experimental investigation was made of the energy conversion efficiency and of the effects of stimulated Brillouin scattering and of optical breakdown, limiting the maximum energy density obtained from several phosphate and silicate neodymium glasses when the duration of the output pulses was 50-150 ns. The experimental results were used to develop a numerical model for calculation of the gain allowing for these processes. A design was developed for an amplifier with ultimate radiation characteristics.

Extractive procedure for uranium determination in water samples by liquid scintillation counting.

PubMed

Gomez Escobar, V; Vera Tomé, F; Lozano, J C; Martín Sánchez, A

1998-07-01

An extractive procedure for uranium determination using liquid scintillation counting with the URAEX cocktail is described. Interference from radon and a strong influence of nitrate ion were detected in this procedure. Interference from radium, thorium and polonium emissions were very low when optimal operating conditions were reached. Quenching effects were considered and the minimum detectable activity was evaluated for different sample volumes. Isotopic analysis of samples can be performed using the proposed method. Comparisons with the results obtained with the general procedure used in alpha spectrometry with passivated implanted planar silicon detectors showed good agreement. The proposed procedure is thus suitable for uranium determination in water samples and can be considered as an alternative to the laborious conventional chemical preparations needed for alpha spectrometry methods using semiconductor detectors.

Comparison of Stretta procedure and toupet fundoplication for gastroesophageal reflux disease-related extra-esophageal symptoms.

PubMed

Yan, Chao; Liang, Wei-Tao; Wang, Zhong-Gao; Hu, Zhi-Wei; Wu, Ji-Min; Zhang, Chao; Chen, Mei-Ping

2015-12-07

To compare the outcomes between the Stretta procedure and laparoscopic toupet fundoplication (LTF) in patients with gastroesophageal reflux disease (GERD)-related extra-esophageal symptoms. From January 2011 to February 2012, a total of 98 patients diagnosed with GERD-related extra-esophageal symptoms who met the inclusion criteria were enrolled in this study. All patients who either underwent the Stretta procedure or LTF treatment have now completed the 3-year follow-up. Primary outcome measures, including frequency and severity of extra-esophageal symptoms, proton pump inhibitor (PPI) use, satisfaction, and postoperative complications, were assessed. The results of the Stretta procedure and LTF therapy were analyzed and compared. There were 47 patients in the Stretta group and 51 patients in the LTF group. Ninety patients were available at the 3-year follow-up. The total of the frequency and severity scores for every symptom improved in both groups (P < 0.05). Improvement in symptom scores of cough, sputum, and wheezing did not achieve statistical significance between the two groups (P > 0.05). However, the score for globus hysterics was different between the Stretta group and the LTF group (4.9 ± 2.24 vs 3.2 ± 2.63, P < 0.05). After the Stretta procedure and LTF treatment, 29 and 33 patients in each group achieved PPI therapy independence (61.7% vs 64.7%, P = 0.835). The patients in the LTF group were more satisfied with their quality of life than those in the Stretta procedure group (P < 0.05). Most complications resolved without intervention within two weeks; however, two patients in the LTF group still suffered from severe dysphagia 2 wk after the operation, and it improved after bougie dilation treatment in both patients. The Stretta procedure and LTF were both safe and effective for the control of GERD-related extra-esophageal symptoms and the reduction of PPI use.

Ultimate compression after impact load prediction in graphite/epoxy coupons using neural network and multivariate statistical analyses

NASA Astrophysics Data System (ADS)

Gregoire, Alexandre David

2011-07-01

The goal of this research was to accurately predict the ultimate compressive load of impact damaged graphite/epoxy coupons using a Kohonen self-organizing map (SOM) neural network and multivariate statistical regression analysis (MSRA). An optimized use of these data treatment tools allowed the generation of a simple, physically understandable equation that predicts the ultimate failure load of an impacted damaged coupon based uniquely on the acoustic emissions it emits at low proof loads. Acoustic emission (AE) data were collected using two 150 kHz resonant transducers which detected and recorded the AE activity given off during compression to failure of thirty-four impacted 24-ply bidirectional woven cloth laminate graphite/epoxy coupons. The AE quantification parameters duration, energy and amplitude for each AE hit were input to the Kohonen self-organizing map (SOM) neural network to accurately classify the material failure mechanisms present in the low proof load data. The number of failure mechanisms from the first 30% of the loading for twenty-four coupons were used to generate a linear prediction equation which yielded a worst case ultimate load prediction error of 16.17%, just outside of the +/-15% B-basis allowables, which was the goal for this research. Particular emphasis was placed upon the noise removal process which was largely responsible for the accuracy of the results.

Comparison of post-creation procedures and costs between surgical and an endovascular approach to arteriovenous fistula creation.

PubMed

Yang, Shuo; Lok, Charmaine; Arnold, Renee; Rajan, Dheeraj; Glickman, Marc

2017-03-28

Due to early and late failures that may occur with surgically created hemodialysis arteriovenous fistulas (SAVF), post-creation procedures are commonly required to facilitate AVF maturation and maintain patency. This study compared AVF post-creation procedures and their associated costs in patients with SAVF to patients with a new endovascularly created AVF (endoAVF). A 5% random sample from Medicare Standard Analytical Files was abstracted to determine post-creation procedures and associated costs for SAVF created from 2011 to 2013. Medicare enrollment during the 6 months prior to and after the AVF creation was required. Patients' follow-up inpatient, outpatient, and physician claims were used to identify post-creation procedures and to estimate average procedure costs. Comparative procedural information on endoAVF was obtained from the Novel Endovascular Access Trial (NEAT). Of 3764 Medicare SAVF patients, 60 successfully matched to endoAVF patients using 1:1 propensity score matching of baseline demographic and clinical characteristics. The total post-creation procedural event rate within 1 year was lower for endoAVF patients (0.59 per patient-year) compared to the matched SAVF cohort (3.43 per patient-year; p<0.05). In the endoAVF cohort, event rates of angioplasty, thrombectomy, revision, catheter placement, subsequent arteriovenous graft (AVG), new SAVF, and vascular access-related infection were all significantly lower than in the SAVF cohort. The average first year cost per patient-year associated with post-creation procedures was estimated at US$11,240 USD lower for endoAVF than for SAVF. Compared to patients with SAVF, patients with endoAVF required fewer post-creation procedures and had lower associated mean costs within the first year.

Secondary Moments due to Prestressing with Different Bond at the Ultimate Limit State

NASA Astrophysics Data System (ADS)

Halvoník, Jaroslav; Pažma, Peter; Vida, Radoslav

2018-03-01

Secondary effects of prestressing develop in statically indeterminate structures (e.g., continuous beams) due to the restraint of deformations imposed by hyperstatic restraints. These effects may significantly influence internal forces and stresses in prestressed structures. Secondary effects are influenced by the redundancy of a structural system, which raises the question of whether they will remain constant after a change in the structural system, e.g., due to the development of plastic hinge(s) in a critical cross-section(s) or after the development of a kinematic mechanism, or if they will disappear when the structure changes into a sequence of simply supported beams. The paper deals with an investigation of the behavior of continuous post-tensioned beams subjected to an ultimate load with significant secondary effects from prestressing. A total of 6 two-span beams prestressed by tendons with different bonds were tested in a laboratory with a load that changed their structural system into a kinematic mechanism. The internal forces and secondary effects of the prestressing were controlled through measurements of the reactions in all the supports. The results revealed that the secondary effects remained as a permanent part of the action on the experimental beams, even after the development of the kinematic mechanism. The results obtained confirmed that secondary effects should be included in all combinations of actions for verifications of ultimate limit states (ULS).

Di-epoxides of the three isomeric dicyclopenta-fused pyrenes: ultimate mutagenic active agents.

PubMed

Otero-Lobato, María José; Kaats-Richters, Veronica E M; Havenith, Remco W A; Jenneskens, Leonardus W; Seinen, Willem

2004-11-14

To rationalize the high bacterial mutagenic response recently found for the (di-) cyclopenta-fused pyrene congeners, viz. cyclopenta[cd]-(1), dicyclopenta[cd,mn]-(2), dicyclopenta[cd,fg]-(3) and dicyclopenta[cd,jk]pyrene (4), in the presence of a metabolic activation mixture (S9-mix), their (di-)epoxides at the externally fused unsaturated five-membered rings were previously proposed as the ultimate mutagenic active forms. In this study, cyclopenta[cd]pyrene-3,4-epoxide (5) and the novel dicyclopenta[cd,mn]pyrene-1,2,4,5-di-epoxide (6), dicyclopenta[cd,fg]pyrene-5,6,7,8-di-epoxide (7) and dicyclopenta[cd,jk]pyrene-1,2,6,7-di-epoxide (8) were synthesised from 1 to 4, respectively, and subsequently assayed for bacterial mutagenicity in the standard microsomal/histidine reverse mutation assay (Ames-assay with Salmonella typhimurium strain TA98). The di-epoxides 6-8 are present as a mixture of their cis- and trans-stereo-isomers in a close to 1:1 ratio ((1)H NMR spectroscopy and ab initio IGLO/III//RHF/6-31G** calculations). The direct-acting mutagenic activity and the strong cytotoxicity exerted by 5-8 both in the absence or presence of an exogenous metabolic activation system (+/-S9-mix) demonstrate that the ultimate mutagenic active forms are the proposed (di-)epoxides of 1-4.

Extraction of DNA from forensic-type sexual assault specimens using simple, rapid sonication procedures.

PubMed

Crouse, C A; Ban, J D; D'Alessio, J K

1993-10-01

Sonication procedures for the extraction of DNA from forensic-type semen specimens have been developed, which, when compared to currently utilized sperm DNA extraction techniques, are simple, rapid and result in comparable DNA yields. Sperm DNA extraction by sonication was performed on whole semen, seminal stains, buccal swabs and post-coital specimens. Ultrasound disruption of sperm cells and their ultimate release of cellular DNA has been conducted in the presence of sperm wash buffers followed by organic extraction or Chelex 100 with little or no compromise to DNA quality, quantity or amplifiability. Two advantages of sonication over currently used forensic techniques to extract sperm DNA include 1) sperm DNA extraction that occurs within five minutes of sonication compared with an hour or greater for water bath incubations in classic enzyme digestion DNA extractions and 2) one less preparatory step with the Chelex/sonication protocol and three less steps with the sonication/organic protocol compared with other procedures thus eliminating potential sample-to-sample cross-contamination. Sperm DNA extracted by optimum sonication procedures was used for forensic HLA DQ alpha typing and restriction fragment length polymorphisms analysis without any adverse effects on typing results.

A SAS(®) macro implementation of a multiple comparison post hoc test for a Kruskal-Wallis analysis.

PubMed

Elliott, Alan C; Hynan, Linda S

2011-04-01

The Kruskal-Wallis (KW) nonparametric analysis of variance is often used instead of a standard one-way ANOVA when data are from a suspected non-normal population. The KW omnibus procedure tests for some differences between groups, but provides no specific post hoc pair wise comparisons. This paper provides a SAS(®) macro implementation of a multiple comparison test based on significant Kruskal-Wallis results from the SAS NPAR1WAY procedure. The implementation is designed for up to 20 groups at a user-specified alpha significance level. A Monte-Carlo simulation compared this nonparametric procedure to commonly used parametric multiple comparison tests. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Comparison of manikin versus porcine models in cricothyrotomy procedure training.

PubMed

Cho, J; Kang, G H; Kim, E C; Oh, Y M; Choi, H J; Im, T H; Yang, J H; Cho, Y S; Chung, H S

2008-11-01

To compare the usefulness for training of a porcine model (larynx, trachea, and pig skin) and a manikin model using a Portex cricothyrotomy kit (PCK). In a prospective randomised crossover trial, participants in the airway workshop performed crico-thyrotomy using a PCK on the porcine and manikin models (Tracheostomy Trainer and Case). The porcine model was made with larynxes and trachea from freshly slaughtered pigs and covered with a piece of thinned pigskin stapled to a wooden board. Participants were asked to assess the following: reality of skin turgor; difficulty with skin penetration, landmark recognition and procedure; reality of the model; and preference for each model using a visual analogue scale (VAS) of 0-10 cm. The VAS scores for each model were compared. 49 participants were included in the study. Mean (SD) VAS scores for the reality of skin turgor, degree of difficulty with skin penetration and landmark recognition were higher with the porcine model than with the manikin model (7.0 (2.1) vs 4.7 (2.0), 6.4 (2.4) vs 3.6 (2.2), 5.1 (2.2) vs 4.2 (2.5), respectively). There was no difference between the models in the difficulty of the procedure (5.0 (2.4) vs 4.7 (3.2)). The porcine model had a higher VAS score for overall reality and preference of the model (7.1 (2.0) vs 4.8 (2.3) and 7.1 (2.0) vs 4.8 (2.2), respectively). The porcine model is a more useful training tool than the manikin model for cricothyrotomy with PCK because of its reality and similarity to human anatomy.

A loudness calculation procedure applied to shaped sonic booms

NASA Technical Reports Server (NTRS)

Shepherd, Kevin P.; Sullivan, Brenda M.

1991-01-01

Described here is a procedure that can be used to calculate the loudness of sonic booms. The procedure is applied to a wide range of sonic booms, both classical N-waves and a variety of other shapes of booms. The loudness of N-waves is controlled by overpressure and the associated rise time. The loudness of shaped booms is highly dependent on the characteristics of the initial shock. A comparison of the calculated loudness values indicates that shaped booms may have significantly reduced loudness relative to N-waves having the same peak overpressure. This result implies that a supersonic transport designed to yield minimized sonic booms may be substantially more acceptable than an unconstrained design.

Comparison of Two Procedures for Analyzing Small Sets of Repeated Measures Data

ERIC Educational Resources Information Center

Vallejo, Guillermo; Livacic-Rojas, Pablo

2005-01-01

This article compares two methods for analyzing small sets of repeated measures data under normal and non-normal heteroscedastic conditions: a mixed model approach with the Kenward-Roger correction and a multivariate extension of the modified Brown-Forsythe (BF) test. These procedures differ in their assumptions about the covariance structure of…

A Comparison of Exposure Control Procedures in CATS Using the GPC Model

ERIC Educational Resources Information Center

Leroux, Audrey J.; Dodd, Barbara G.

2016-01-01

The current study compares the progressive-restricted standard error (PR-SE) exposure control method with the Sympson-Hetter, randomesque, and no exposure control (maximum information) procedures using the generalized partial credit model with fixed- and variable-length CATs and two item pools. The PR-SE method administered the entire item pool…

Comparison of IRT Likelihood Ratio Test and Logistic Regression DIF Detection Procedures

ERIC Educational Resources Information Center

Atar, Burcu; Kamata, Akihito

2011-01-01

The Type I error rates and the power of IRT likelihood ratio test and cumulative logit ordinal logistic regression procedures in detecting differential item functioning (DIF) for polytomously scored items were investigated in this Monte Carlo simulation study. For this purpose, 54 simulation conditions (combinations of 3 sample sizes, 2 sample…

PROXIMATE OR ULTIMATE GENOTOXIC FORMS OF ARSENIC: METHYLATED ARSENIC(III) SPECIES THAT REACT DIRECTLY WITH DNA

EPA Science Inventory

PROXIMATE OR ULTIMATE GENOTOXIC FORMS OF ARSENIC: METHYLATED ARSENIC(III) SPECIES THAT REACT DIRECTL Y WITH DNA.

Abstract:

Although inorganic arsenic (iAs), arsenite or arsenate, is genotoxic, there has been no demonstration that iAs or a methylated metabolite...

Episodic foresight and anxiety: Proximate and ultimate perspectives.

PubMed

Miloyan, Beyon; Bulley, Adam; Suddendorf, Thomas

2016-03-01

In this paper, we examine the relationship between episodic foresight and anxiety from an evolutionary perspective, proposing that together they confer an advantage for modifying present moment decision-making and behaviour in the light of potential future threats to fitness. We review the body of literature on the role of episodic foresight in anxiety, from both proximate and ultimate perspectives. We propose that anxious feelings associated with episodic simulation of possible threat-related future events serve to imbue these simulations with motivational currency. Episodic and semantic details of a future threat may be insufficient for motivating its avoidance, but anxiety associated with a simulation can provoke adaptive threat management. As such, we detail how anxiety triggered by a self-generated, threat-related future simulation prepares the individual to manage that threat (in terms of its likelihood and/or consequences) over greater temporal distances than observed in other animals. We then outline how anxiety subtypes may represent specific mechanisms for predicting and managing particular classes of fitness threats. This approach offers an inroad for understanding the nature of characteristic future thinking patterns in anxiety disorders and serves to illustrate the adaptive function of the mechanism from which clinical anxiety deviates. © 2015 The British Psychological Society.

Ultimate biodegradability and ecotoxicity of orally administered antidiabetic drugs.

PubMed

Markiewicz, Marta; Jungnickel, Christian; Stolte, Stefan; Białk-Bielińska, Anna; Kumirska, Jolanta; Mrozik, Wojciech

2017-07-05

Hypoglycaemic pharmaceuticals are recently more and more frequently detected in the environment. In our previous study, we have shown that even though many of them undergo significant primary degradation some are transformed to stable products or undergo such transformation that a large part of the structure is still preserved. One of the main routes of elimination from wastewaters or surface waters is biodegradation and a lack thereof leads to accumulation in the environment. Within this work we tested the ultimate biodegradability of six oral antidiabetics: metformin and its main metabolite guanylurea, acarbose, glibenclamide, gliclazide, glimepiride and repaglinide. We also compared the experimental results obtained in this and accompanying work with models designed to predict biodegradability and showed that these models are only moderately successful. Additionally, we examined these compounds in acute Daphnia magna test to check if they might pose an ecotoxicological threat. Combining the results of biodegradability and toxicity tests allows a preliminary assessment of their potential environmental impact. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparison of transhepatic and extrahepatic routes for EUS-guided rendezvous procedure for distal CBD obstruction.

PubMed

Dhir, Vinay; Bhandari, Suryaprakash; Bapat, Mukta; Joshi, Nitin; Vivekanandarajah, Suhirdan; Maydeo, Amit

2013-04-01

EUS-guided rendezvous procedure (EUS-RV) can be done by the transhepatic (TH) or the extrahepatic (EH) route. There is no data on the preferred access route when both routes are available. To compare the success, complications, and duration of hospitalization for patients undergoing EUS-RV by the TH or the EH route. Patients with distal common bile duct (CBD) obstruction, who failed selective cannulation, underwent EUS-RV by the TH route through the stomach or the EH route through the duodenum. A total of 35 patients were analysed (17 TH, 18 EH). The mean procedure time was significantly longer for the TH group (34.4 vs. 25.7 min; p = 0.0004). There was no difference in the technical success (94.1 vs. 100%). However, the TH group had a higher incidence of post-procedure pain (44.1 vs. 5.5%; p = 0.017), bile leak (11.7 vs. 0; p = 0.228), and air under diaphragm (11.7 vs. 0; p = 0.228). All bile leaks were small and managed conservatively. Duration of hospitalization was significantly higher for the TH group (2.52 vs. 0.17 days; p = 0.015). EUS-RV has similar success rate by the TH or the EH route. However, the TH route has higher post-procedure pain, longer procedure time, and longer duration of hospitalization. The EH route should be preferred for EUS-RV in patients with distal CBD obstruction when both access routes are technically feasible.

Comparison of Stretta procedure and toupet fundoplication for gastroesophageal reflux disease-related extra-esophageal symptoms

PubMed Central

Yan, Chao; Liang, Wei-Tao; Wang, Zhong-Gao; Hu, Zhi-Wei; Wu, Ji-Min; Zhang, Chao; Chen, Mei-Ping

2015-01-01

AIM: To compare the outcomes between the Stretta procedure and laparoscopic toupet fundoplication (LTF) in patients with gastroesophageal reflux disease (GERD)-related extra-esophageal symptoms. METHODS: From January 2011 to February 2012, a total of 98 patients diagnosed with GERD-related extra-esophageal symptoms who met the inclusion criteria were enrolled in this study. All patients who either underwent the Stretta procedure or LTF treatment have now completed the 3-year follow-up. Primary outcome measures, including frequency and severity of extra-esophageal symptoms, proton pump inhibitor (PPI) use, satisfaction, and postoperative complications, were assessed. The results of the Stretta procedure and LTF therapy were analyzed and compared. RESULTS: There were 47 patients in the Stretta group and 51 patients in the LTF group. Ninety patients were available at the 3-year follow-up. The total of the frequency and severity scores for every symptom improved in both groups (P < 0.05). Improvement in symptom scores of cough, sputum, and wheezing did not achieve statistical significance between the two groups (P > 0.05). However, the score for globus hysterics was different between the Stretta group and the LTF group (4.9 ± 2.24 vs 3.2 ± 2.63, P < 0.05). After the Stretta procedure and LTF treatment, 29 and 33 patients in each group achieved PPI therapy independence (61.7% vs 64.7%, P = 0.835). The patients in the LTF group were more satisfied with their quality of life than those in the Stretta procedure group (P < 0.05). Most complications resolved without intervention within two weeks; however, two patients in the LTF group still suffered from severe dysphagia 2 wk after the operation, and it improved after bougie dilation treatment in both patients. CONCLUSION: The Stretta procedure and LTF were both safe and effective for the control of GERD-related extra-esophageal symptoms and the reduction of PPI use. PMID:26668513

Neural Correlates of Encoding Predict Infants' Memory in the Paired-Comparison Procedure

ERIC Educational Resources Information Center

Snyder, Kelly A.

2010-01-01

The present study used event-related potentials (ERPs) to monitor infant brain activity during the initial encoding of a previously novel visual stimulus, and examined whether ERP measures of encoding predicted infants' subsequent performance on a visual memory task (i.e., the paired-comparison task). A late slow wave component of the ERP measured…

Plasticity and constraints on social evolution in African mole-rats: ultimate and proximate factors

PubMed Central

Faulkes, Chris G.; Bennett, Nigel C.

2013-01-01

Here, we review comparative studies of African mole-rats (family Bathyergidae) to explain how constraints acting at the ultimate (environmental) and proximate (organismal) levels have led to convergent gains and losses of sociality within this extensive adaptive radiation of subterranean rodents endemic to sub-Saharan Africa. At the ultimate level, living in environments that range from mesic through to arid has led to both variation and flexibility in social organization among species, culminating in the pinnacle of social evolution in the eusocial naked and Damaraland mole-rats (Heterocephalus glaber and Fukomys damarensis). The common mole-rat (Cryptomys hottentotus) provides a model example of how plasticity in social traits exists within a single species inhabiting areas with different ecological constraint. At the proximate level, reproductive strategies and cooperative breeding may be constrained by the correlated evolution of a suite of traits including physiological suppression of reproduction, the development of physiological and morphological castes, and the mode of ovulatory control and seasonality in breeding. Furthermore, recent neurobiological advances indicate that differential patterns of neurotransmitter expression within the forebrain may underpin (and limit) either a solitary or group living/cooperative lifestyle not only in mole-rats, but also more widely among disparate mammalian taxa. PMID:23569295

Comparison of alternative devices to determine aggregate shape.

DOT National Transportation Integrated Search

2005-01-01

This study compared devices (with corresponding procedures) that may be used to classify flat and elongated (F&E) particle content for coarse aggregate sources. The comparison involved the traditional (and manual) proportional caliper and two digital...

Towards a characterization of a motive whose ultimate goal is to increase the welfare of the world: Quixoteism.

PubMed

Salgado, Sergio; Oceja, Luis

2011-05-01

We use the term Quixoteism to refer to a new social motive. The characterization of this motive deals with two aspects: the definition of the ultimate goal (i.e., to increase the welfare of the world) and the proposal of a process that activates it (i.e., a transcendental-change orientation). Three studies were conducted to test this characterization. In Study 1 we developed an empirical measure of the transcendental-change orientation. The participants in Studies 2 and 3 were presented with a need situation. Results showed that the centrality of such an orientation was directly related to an interpretation consistent with the ultimate goal of Quixoteism (Study 2), and that its salience increases the likelihood of performing a high-cost prosocial behavior (Study 3).

Recovery process and determinants of adverse event occurrence in bronchoscopic procedures performed under general anaesthesia.

PubMed

Özden Omaygenç, Derya; Ünal, Nermin; Edipoğlu, Saadet İpek; Barca Şeker, Tuğçe; Özgül, Mehmet Akif; Turan, Demet; Özdemir, Cengiz; Karaca, İbrahim Oğuz; Çetinkaya, Erdoğan

2018-04-16

Regarding the fact that rigid bronchoscopy is generally performed under general anaesthesia and this patient subgroup is remarkably morbid, encountering procedure and/or anaesthesia related complications are highly likely. Here, we aimed to assess factors influencing recovery and detect possible determinants of adverse event occurrence during these operations performed in a tertiary referral centre. Eighty-one consecutive ASA I-IV patients were recruited for this investigation. In the operating theatre after induction of anaesthesia and advancement of the device, maintenance was provided with total intravenous anaesthesia. Neuromuscular blockage was invariably administered, and patients were ventilated manually. In addition to preoperative demographic and procedural characteristics, perioperative hemodynamic variables, recovery times and observed adverse events were noted. Basic demographic properties, ASA and Mallampati scores, and procedure specific variables as lesion localization, lesion and procedure type were comparable among groups assembled with reference to event occurrence. Patients who had experienced adverse event had higher heart rates. Recovery times were comparable between Event (-) and Event (+) groups. Relationship of recovery process were individually tested with all variables and only lesion type was detected to have an effect on respiration and extubation times. Among all parameters only procedural time seemed to be associated with adverse event occurrence (mins, 22.9 ± 11.9 vs 41.6 ± 28.8, P < .001). Recovery times related with return of spontaneous respiration were significantly lower in procedures performed for treatment of tumoral diseases in this study and procedure length was determined to be the ultimate factor which had an impact on adverse event occurrence. © 2018 John Wiley & Sons Ltd.

Performance of conventionally powered vehicles tested to an electric vehicle test procedure

NASA Technical Reports Server (NTRS)

Slavik, R. J.; Dustin, M. O.; Lumannick, S.

1977-01-01

A conventional Volkswagen transporter, a Renault 5, a Pacer, and a U. S. Postal Service general DJ-5 delivery van were treated to an electric vehicle test procedure in order to allow direct comparison of conventional and electric vehicles. Performance test results for the four vehicles are presented.

A Deterministic Computational Procedure for Space Environment Electron Transport

NASA Technical Reports Server (NTRS)

Nealy, John E.; Chang, C. K.; Norman, Ryan B.; Blattnig, Steve R.; Badavi, Francis F.; Adamcyk, Anne M.

2010-01-01

A deterministic computational procedure for describing the transport of electrons in condensed media is formulated to simulate the effects and exposures from spectral distributions typical of electrons trapped in planetary magnetic fields. The primary purpose for developing the procedure is to provide a means of rapidly performing numerous repetitive transport calculations essential for electron radiation exposure assessments for complex space structures. The present code utilizes well-established theoretical representations to describe the relevant interactions and transport processes. A combined mean free path and average trajectory approach is used in the transport formalism. For typical space environment spectra, several favorable comparisons with Monte Carlo calculations are made which have indicated that accuracy is not compromised at the expense of the computational speed.

An adaptive embedded mesh procedure for leading-edge vortex flows

NASA Technical Reports Server (NTRS)

Powell, Kenneth G.; Beer, Michael A.; Law, Glenn W.

1989-01-01

A procedure for solving the conical Euler equations on an adaptively refined mesh is presented, along with a method for determining which cells to refine. The solution procedure is a central-difference cell-vertex scheme. The adaptation procedure is made up of a parameter on which the refinement decision is based, and a method for choosing a threshold value of the parameter. The refinement parameter is a measure of mesh-convergence, constructed by comparison of locally coarse- and fine-grid solutions. The threshold for the refinement parameter is based on the curvature of the curve relating the number of cells flagged for refinement to the value of the refinement threshold. Results for three test cases are presented. The test problem is that of a delta wing at angle of attack in a supersonic free-stream. The resulting vortices and shocks are captured efficiently by the adaptive code.

A Comparison of Exposure Control Procedures in CAT Systems Based on Different Measurement Models for Testlets

ERIC Educational Resources Information Center

Boyd, Aimee M.; Dodd, Barbara; Fitzpatrick, Steven

2013-01-01

This study compared several exposure control procedures for CAT systems based on the three-parameter logistic testlet response theory model (Wang, Bradlow, & Wainer, 2002) and Masters' (1982) partial credit model when applied to a pool consisting entirely of testlets. The exposure control procedures studied were the modified within 0.10 logits…

Influence of the Kingak Shale ultimate shelf margin on frontal structures of the Brooks Range in the National Petroleum Reserve in Alaska

USGS Publications Warehouse

Stier, Natalie E.; Connors, Christopher D.; Houseknecht, David W.

2014-01-01

The Jurassic–Lower Cretaceous Kingak Shale in the National Petroleum Reserve in Alaska (NPRA) includes several southward-offlapping depositional sequences that culminate in an ultimate shelf margin, which preserves the depositional profile in southern NPRA. The Kingak Shale thins abruptly southward across the ultimate shelf margin and grades into condensed shale, which is intercalated with underlying condensed shale and chert of the Upper Triassic Shublik Formation and overlying condensed shale of the Lower Cretaceous pebble shale unit and the gamma-ray zone (GRZ) of the Hue Shale. This composite of condensed shale forms a thin (≈300-meter) and mechanically weak section between much thicker and mechanically stronger units, including the Sadlerochit and Lisburne Groups below and the sandstone-prone foredeep wedge of the Torok Formation above. Seismic interpretation indicates that the composite condensed section acted as the major detachment during an Early Tertiary phase of deformation in the northern foothills of the Brooks Range and that thrust faults step up northward to the top of the Kingak, or to other surfaces within the Kingak or the overlying Torok. The main structural style is imbricate fault-bend folding, although fault-propagation folding is evident locally, and large-displacement thrust faults incorporate backthrusting to form structural wedges. The Kingak ultimate shelf margin served as a ramp to localize several thrust faults, and the spatial relationship between the ultimate shelf margin and thrust vergence is inferred to have controlled many structures in southern NPRA. For example, the obliqueness of the Carbon Creek anticline relative to other structures in the foothills is the result of northward-verging thrust faults impinging obliquely on the Kingak ultimate shelf margin in southwestern NPRA.

Increasing the Rigor of Procedural Fidelity Assessment: An Empirical Comparison of Direct Observation and Permanent Product Review Methods

ERIC Educational Resources Information Center

Sanetti, Lisa M. Hagermoser; Collier-Meek, Melissa A.

2014-01-01

Although it is widely accepted that procedural fidelity data are important for making valid decisions about intervention effectiveness, there is little empirical guidance for researchers and practitioners regarding how to assess procedural fidelity. A first step in moving procedural fidelity assessment research forward is to develop a…

Is ``the Theory of Everything'' Merely the Ultimate Ensemble Theory?

NASA Astrophysics Data System (ADS)

Tegmark, Max

1998-11-01

We discuss some physical consequences of what might be called "the ultimate ensemble theory,", where not only worlds corresponding to say different sets of initial data or different physical constants are considered equally real, but also worlds ruled by altogether different equations. The only postulate in this theory is that all structures that exist mathematically exist also physically, by which we mean that in those complex enough to contain self-aware substructures (SASs), these SASs will subjectively perceive themselves as existing in a physically "real" world. We find that it is far from clear that this simple theory, which has no free parameters whatsoever, is observationally ruled out. The predictions of the theory take the form of probability distributions for the outcome of experiments, which makes it testable. In addition, it may be possible to rule it out by comparing its a priori predictions for the observable attributes of nature (the particle masses, the dimensionality of spacetime, etc.) with what is observed.

A design procedure for a tension-wire stiffened truss-column

NASA Technical Reports Server (NTRS)

Greene, W. H.

1980-01-01

A deployable, tension wire stiffened, truss column configuration was considered for space structure applications. An analytical procedure, developed for design of the truss column and exercised in numerical studies, was based on equivalent beam stiffness coefficients in the classical analysis for an initially imperfect beam column. Failure constraints were formulated to be used in a combined weight/strength and nonlinear mathematical programming automated design procedure to determine the minimum mass column for a particular combination of design load and length. Numerical studies gave the mass characteristics of the truss column for broad ranges of load and length. Comparisons of the truss column with a baseline tubular column used a special structural efficiency parameter for this class of columns.

Radiation exposure, and procedure and fluoroscopy times in endovascular treatment of intracranial aneurysms: a methodological comparison.

PubMed

Cheung, Nicholas K; Boutchard, Michelle; Carr, Michael W; Froelich, Jens J

2018-01-09

Limited data are available for radiation exposure, and procedure and fluoroscopy times in neuroendovascular treatment (NET) strategies. This study establishes and compares related parameters between coil embolization (COIL), balloon assisted coil embolization (BAC), stent assisted coil embolization (SAC), and flow diverting technology (FDT) in NET of intracranial aneurysms. Between 2010 and 2017, 249 consecutive intracranial aneurysms underwent NET at a single center, all performed by the same operator. Dose area products (DAP), and procedure and fluoroscopy times were recorded and compared between COIL, BAC, SAC, and FDT techniques. Differences in parameters between cohorts were analyzed for significance using the Mann-Whitney U test, unpaired t test and χ 2 test. Additional subgroup analysis was performed for emergency and elective cases. 83 aneurysms were treated with COIL (33%), 72 with BAC (29%), 61 with SAC (25%), and 33 with FDT (13%). Baseline characteristics were largely similar within these groups (P>0.05). Among COIL, BAC, and FDT cohorts, no significant difference was found for mean DAP, or procedure and fluoroscopy times (P>0.05). However, compared with all other cohorts, SAC was associated with a significantly higher DAP and longer procedure and fluoroscopy times (P<0.005). No significant difference was recorded for emergency and elective case subgroups. Compared with other NET strategies, SAC was associated with a significantly higher DAP, and longer procedure and fluoroscopy times. This study provides an initial dataset regarding radiation exposure, and procedure and fluoroscopy times for common NET, and may assist ALARA (As Low As Reasonably Achievable) principles to reduce radiation risks. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Peer-assisted learning model enhances clinical clerk's procedural skills.

PubMed

Huang, Chia-Chang; Hsu, Hui-Chi; Yang, Ling-Yu; Chen, Chen-Huan; Yang, Ying-Ying; Chang, Ching-Chih; Chuang, Chiao-Lin; Lee, Wei-Shin; Lee, Fa-Yauh; Hwang, Shinn-Jang

2018-05-17

Failure to transfer procedural skills learned in a laboratory to the bedside is commonly due to a lack of peer support/stimulation. A digital platform (Facebook) allows new clinical clerks to share experiences and tips that help augment their procedural skills in a peer-assisted learning/teaching method. This study aims to investigate the effectiveness of the innovation of using the digital platform to support the transfer of laboratory-trained procedural skills in the clinical units. Volunteer clinical clerks (n = 44) were enrolled into the peer-assisted learning (PAL) group, which was characterized by the peer-assisted learning of procedural skills during their final 3-month clinical clerkship block. Other clerks (n = 51) did not join the procedural skills-specific Facebook group and served as the self-directed learning regular group. The participants in both the PAL and regular groups completed pre- and post-intervention self-assessments for general self-assessed efficiency ratings (GSER) and skills specific self-assessed efficiency ratings (SSSER) for performing vein puncture, intravenous (IV) catheter and nasogastric (NG) tube insertion. Finally, all clerks received the post-intervention 3-station Objective Structured Clinical Skills Examination (OSCE) to test their proficiency for the abovementioned three procedural skills. Higher cumulative numbers of vein punctures, IV catheter insertions and NG tube insertions at the bedside were carried out by the PAL group than the regular group. A greater improvement in GSERs and SSSERs for medical procedures was found in the PAL group than in the regular group. The PAL group obtained higher procedural skills scores in the post-intervention OSCEs than the regular group. Our study suggested that the implementation of a procedural skill-specific digital platform effectively helps clerks to transfer laboratory-trained procedural skills into the clinical units. In comparison with the regular self-directed learning

[Rapid identification of microorganisms by mass spectrometry in a blood culture system. Comparison of two procedures].

PubMed

Cattani, María E; Posse, Tamara; Hermes, Ricardo L; Kaufman, Sara C

2015-01-01

Rapid identification of microorganisms is critical in hospitalized infected patients. Blood culture is currently the gold standard for detecting and identifying microorganisms causing bacteremia or sepsis. The introduction of mass spectrometry by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF MS) in microbiology laboratories, especially in microorganisms growing in blood culture bottles, provides rapid identification. This study evaluates the performance of the Maldi Sepsityper Biotyper procedure (hereinafter, MS) compared to that of an in-home method (hereinafter, HF). Eight hundred and forty (840) positive blood culture bottles were processed using the HF procedure, 542 of which were also processed using MS. The organisms were identified in 670 (79.76%) and 391 (72.14%) bottles respectively (p = 0,0013). This study demonstrates the effectiveness of both procedures for identifying microorganisms directly from positive blood culture bottles. However, the HF procedure proved to be more effective than MS, especially in the presence of Gram positive organisms. Copyright © 2015 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

Evaluation of procedural learning transfer from a virtual environment to a real situation: a case study on tank maintenance training.

PubMed

Ganier, Franck; Hoareau, Charlotte; Tisseau, Jacques

2014-01-01

Virtual reality opens new opportunities for operator training in complex tasks. It lowers costs and has fewer constraints than traditional training. The ultimate goal of virtual training is to transfer knowledge gained in a virtual environment to an actual real-world setting. This study tested whether a maintenance procedure could be learnt equally well by virtual-environment and conventional training. Forty-two adults were divided into three equally sized groups: virtual training (GVT® [generic virtual training]), conventional training (using a real tank suspension and preparation station) and control (no training). Participants then performed the procedure individually in the real environment. Both training types (conventional and virtual) produced similar levels of performance when the procedure was carried out in real conditions. Performance level for the two trained groups was better in terms of success and time taken to complete the task, time spent consulting job instructions and number of times the instructor provided guidance.

Defining Staged Procedures for Percutaneous Coronary Intervention Trials: A Guidance Document.

PubMed

Spitzer, Ernest; McFadden, Eugène; Vranckx, Pascal; de Vries, Ton; Ren, Ben; Collet, Carlos; Onuma, Yoshinobu; Garcia-Garcia, Hector M; Lopes, Renato D; Stone, Gregg W; Cutlip, Donald E; Serruys, Patrick W

2018-05-14

Patients in coronary intervention trials may require more than 1 procedure to complete the intended revascularization strategy. However, these staged interventions are not consistently defined. Standardized definitions are needed to allow meaningful comparisons of this outcome among trials. This document provides guidance on relevant parameters involving staged procedures, including minimum data collection and consistent classification of coronary procedures initially identified as staged; the aim is to achieve consistency among clinical trialists, sponsors, health authorities, and regulators. Definitions were developed jointly among representatives of academic institutions and clinical research organizations based on clinical trial experience and published literature. Reasons for staged procedures were identified and include baseline kidney function, contrast load and radiation exposure, lesion complexity, and patient or operator fatigue. Moreover, nonclinical reasons include procedure scheduling and reimbursement. Management of staged procedures should be a standalone section in clinical trial protocols and clinical events committee charters. These documents should clearly define a time window for staged procedures that allows latitude for local policies, while respecting accepted clinical guidelines, and consistency with study objectives. Investigators should document in the case report form the intent to stage a procedure, the lesions to be treated, and the reasons for staging, preferably before randomization. Ideally, all reinterventions, or at least all procedures performed after the recommended time window, those in which data suggest an anticipated procedure due to a worsening condition and those where a revascularization is attempted in the target vessel, should be reviewed by an independent clinical events committee. Copyright © 2018 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Geographic applications of ERTS-1 data to landscape change

NASA Technical Reports Server (NTRS)

Rehder, J. B.

1973-01-01

The analysis of landscape change requires large area coverage on a periodic basis in order to analyze aggregate changes over an extended period of time. To date, only the ERTS program can provide this capability. Three avenues of experimentation and analysis are being used in the investigation: (1) a multi-scale sampling procedure utilizing aircraft imagery for ground truth and control; (2) a densitometric and computer analytical experiment for the analysis of gray tone signatures, comparisons and ultimately for landscape change detection and monitoring; and (3) an ERTS image enhancement procedure for the detection and analysis of photomorphic regions.

Office-based deep sedation for pediatric ophthalmologic procedures using a sedation service model.

PubMed

Lalwani, Kirk; Tomlinson, Matthew; Koh, Jeffrey; Wheeler, David

2012-01-01

Aims. (1) To assess the efficacy and safety of pediatric office-based sedation for ophthalmologic procedures using a pediatric sedation service model. (2) To assess the reduction in hospital charges of this model of care delivery compared to the operating room (OR) setting for similar procedures. Background. Sedation is used to facilitate pediatric procedures and to immobilize patients for imaging and examination. We believe that the pediatric sedation service model can be used to facilitate office-based deep sedation for brief ophthalmologic procedures and examinations. Methods. After IRB approval, all children who underwent office-based ophthalmologic procedures at our institution between January 1, 2000 and July 31, 2008 were identified using the sedation service database and the electronic health record. A comparison of hospital charges between similar procedures in the operating room was performed. Results. A total of 855 procedures were reviewed. Procedure completion rate was 100% (C.I. 99.62-100). There were no serious complications or unanticipated admissions. Our analysis showed a significant reduction in hospital charges (average of $1287 per patient) as a result of absent OR and recovery unit charges. Conclusions. Pediatric ophthalmologic minor procedures can be performed using a sedation service model with significant reductions in hospital charges.

Crew procedures and workload of retrofit concepts for microwave landing system

NASA Technical Reports Server (NTRS)

Summers, Leland G.; Jonsson, Jon E.

1989-01-01

Crew procedures and workload for Microwave Landing Systems (MLS) that could be retrofitted into existing transport aircraft were evaluated. Two MLS receiver concepts were developed. One is capable of capturing a runway centerline and the other is capable of capturing a segmented approach path. Crew procedures were identified and crew task analyses were performed using each concept. Crew workload comparisons were made between the MLS concepts and an ILS baseline using a task-timeline workload model. Workload indexes were obtained for each scenario. The results showed that workload was comparable to the ILS baseline for the MLS centerline capture concept, but significantly higher for the segmented path capture concept.

Explaining the absence of surgical procedure regulation.

PubMed

Darrow, Jonathan J

Each year in the United States, surgeons perform approximately 64 million surgical procedures, ranging from tooth extraction to open heart surgery. Yet, notwithstanding the frequency of surgical procedures and their often critical importance to patient health, no state or federal agency either approves the use of new surgical procedures or directly regulates existing procedures. The absence of surgical procedure regulation differs from the regulation of new pharmaceutical products, which can be introduced into interstate commerce only after the Food and Drug Administration (FDA) has reviewed "adequate and well-controlled [clinical] investigations" and concluded the data from those studies sufficiently establish the drug's safety and efficacy. Surgical procedures, by contrast, are more often conveyed from professor to student, the result being that surgical approaches may vary considerably from one geographic region to another. Whether different techniques produce different outcomes is not always clear, in part because the absence of regulation means that evidence often has not been systematically generated or may be in a form not suitable for comparison. Commentators have noted the differing treatment that persists between surgery and pharmaceuticals and have offered a number of justifications. For example, they have suggested that the surgical profession should self-regulate, that excessive regulation could deter surgeries of unproven benefit even when the surgery may be in the best interest of the patient, and that surgical trials could disrupt the doctor-patient relationship, such as by emphasizing uncertainty in a context where patient trust is important. In the context of innovative (as opposed to established) surgical procedures, controlled trials might be disfavored due to concern that desperate patients might unwisely submit themselves to risky experimental treatments undertaken by overzealous researchers. When commentators advocate for increased surgical

Gross-Motor Skill Acquisition by Preschool Dance Students under Self-Instruction Procedures

ERIC Educational Resources Information Center

Vintere, Parsla; Hemmes, Nancy S.; Brown, Bruce L.; Poulson, Claire L.

2004-01-01

The effects of two training procedures -- (a) modeling and praise and (b) self-instruction, modeling, and praise -- on complex gross-motor chain acquisition for preschool dance class students were evaluated. Six girls participated in the study. A multiple baseline design across six gross-motor chains with a secondary group comparison for treatment…

Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory; comparison of a nitric acid in-bottle digestion procedure to other whole-water digestion procedures

USGS Publications Warehouse

Garbarino, John R.; Hoffman, Gerald L.

1999-01-01

A hydrochloric acid in-bottle digestion procedure is used to partially digest wholewater samples prior to determining recoverable elements by various analytical methods. The use of hydrochloric acid is problematic for some methods of analysis because of spectral interference. The inbottle digestion procedure has been modified to eliminate such interference by using nitric acid instead of hydrochloric acid in the digestion. Implications of this modification are evaluated by comparing results for a series of synthetic whole-water samples. Results are also compared with those obtained by using U.S. Environmental Protection Agency (1994) (USEPA) Method 200.2 total-recoverable digestion procedure. Percentage yields that use the nitric acid inbottle digestion procedure are within 10 percent of the hydrochloric acid in-bottle yields for 25 of the 26 elements determined in two of the three synthetic whole-water samples tested. Differences in percentage yields for the third synthetic whole-water sample were greater than 10 percent for 16 of the 26 elements determined. The USEPA method was the most rigorous for solubilizing elements from particulate matter in all three synthetic whole-water samples. Nevertheless, the variability in the percentage yield by using the USEPA digestion procedure was generally greater than the in-bottle digestion procedure, presumably because of the difficulty in controlling the digestion conditions accurately.

Family Size Preferences in Europe and USA: Ultimate Expected Number of Children. Comparative Studies Number 26: ECE Analyses of Surveys in Europe and USA.

ERIC Educational Resources Information Center

Berent, Jerzy

This survey analysis compares fertility levels in the United States and European countries, discusses socioeconomic influences in ultimate expected family size, and examines birth rate trends. The average number of ultimately expected children varies from 2.13 children per woman in Bulgaria to 2.80 in Spain. Eighty to 90 percent of U.S. and…

Total cost comparison of 2 biopsy methods for nonpalpable breast lesions.

PubMed

Bodai, B I; Boyd, B; Brown, L; Wadley, H; Zannis, V J; Holzman, M

2001-05-01

To identify, quantify, and compare total facility costs for 2 breast biopsy methods: vacuum-assisted biopsy (VAB) and needle-wire-localized open surgical biopsy (OSB). A time-and-motion study was done to identify unit resources used in both procedures. Costs were imputed from published literature to value resources. A comparison of the total (fixed and variable) costs of the 2 procedures was done. A convenience sample of 2 high-volume breast biopsy (both VAB and OSB) facilities was identified. A third facility (OSB only) and 8 other sites (VAB only) were used to capture variation. Staff interviews, patient medical records, and billing data were used to check observed data. One hundred and sixty-seven uncomplicated procedures (71 OSBs, 96 VABs) were observed. Available demographic and clinical data were analyzed to assess selection bias, and sensitivity analyses were done on the main assumptions. The total facility costs of the VAB procedure were lower than the costs of the OSB procedure. The overall cost advantage for using VAB ranges from $314 to $843 per procedure depending on the facility type. Variable cost comparison indicated little difference between the 2 procedures. The largest fixed cost difference was $763. Facilities must consider the cost of new technology, especially when the new technology is as effective as the present technology. The seemingly high cost of equipment might negatively influence a decision to adopt VAB, but when total facility costs were analyzed, the new technology was less costly.

Ultimate Attainment in Late Second Language Acquisition: Phonetic and Grammatical Challenges in Advanced Dutch-English Bilingualism

ERIC Educational Resources Information Center

Schmid, Monika S.; Gilbers, Steven; Nota, Amber

2014-01-01

The present article provides an exploration of ultimate attainment in second language (L2) and its limitations. It is argued that the question of maturational constraints can best be investigated when the reference population is bilingual and exposed on a regular basis to varieties of their first language (L1) that show cross-linguistic influence.…

Investigation of the continuous flow of the sample solution on the performance of electromembrane extraction: Comparison with conventional procedure.

PubMed

Nojavan, Saeed; Sirani, Mahsa; Asadi, Sakine

2017-10-01

In this study, electromembrane extraction from a flowing sample solution, termed as continuous-flow electromembrane extraction, was developed and compared with conventional procedures for the determination of four basic drugs in real samples. Experimental parameters affecting the extraction efficiency were further studied and optimized. Under optimum conditions, linearity of continuous-flow procedure was within 8.0-500 ng/mL, while it was wider for conventional procedures (2.0-500 ng/mL). Moreover, repeatability (percentage relative standard deviation) was found to range between 5.6 and 10.4% (n = 3) for the continuous-flow procedure, with a better repeatability than that of conventional procedures (2.3-5.5% (n = 3)). Also, for the continuous-flow procedure, the estimated detection limit (signal-to-noise ratio = 3) was less than 2.4 ng/mL and extraction recoveries were within 8-10%, while the corresponding figures for conventional procedures were less than 0.6 ng/mL and 42-60%, respectively. Thus, the results showed that both continuous flow and conventional procedures were applicable for the extraction of model compounds. However, the conventional procedure was more convenient to use, and thus it was applied to determine sample drugs in real urine and wastewater samples. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hemodynamic Parameters during Laryngoscopic Procedures in the Office and in the Operating Room.

PubMed

Tierney, William S; Chota, Rebecca L; Benninger, Michael S; Nowacki, Amy S; Bryson, Paul C

2016-09-01

Previous research has shown that office-based laryngoscopic procedures can induce hemodynamic changes, including tachycardia and severe hypertension, calling into question the safety of these procedures. However, comparison between office and operating room (OR) procedures has not been carried out. Therefore, we prospectively measured hemodynamic variables in both settings to compare hemodynamic changes between office and OR procedures. Prospective cohort study. Single academic center. Subjects undergoing office and OR laryngoscopic procedures were prospectively identified, and 92 OR and 70 office subjects were included. Heart rate and blood pressure were measured at established time points before, during, and after the procedures. Descriptive and comparative statistical analyses were conducted. Severe hemodynamic events, either tachycardia or severe hypertension (blood pressure >180 mm Hg systolic or >110 mm Hg diastolic), occurred significantly more frequently in OR than office procedures (41% vs 20%; P = .006). OR severe hemodynamic events occurred more commonly than previously reported rates in the office (41% vs 28%; P = .012). Regression analyses showed that the odds of having a severe hemodynamic event were 3.66 times higher in OR versus office procedures. Severe hemodynamic events are more likely to occur in the OR than in the office during laryngologic procedures. While larger studies will be required to establish rates of dangerous cardiovascular events in laryngoscopic procedures, hemodynamic parameters indicate that office-based procedures have a safety benefit for procedures that can be conducted in either setting. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2016.

Consensus building for interlaboratory studies, key comparisons, and meta-analysis

NASA Astrophysics Data System (ADS)

Koepke, Amanda; Lafarge, Thomas; Possolo, Antonio; Toman, Blaza

2017-06-01

Interlaboratory studies in measurement science, including key comparisons, and meta-analyses in several fields, including medicine, serve to intercompare measurement results obtained independently, and typically produce a consensus value for the common measurand that blends the values measured by the participants. Since interlaboratory studies and meta-analyses reveal and quantify differences between measured values, regardless of the underlying causes for such differences, they also provide so-called ‘top-down’ evaluations of measurement uncertainty. Measured values are often substantially over-dispersed by comparison with their individual, stated uncertainties, thus suggesting the existence of yet unrecognized sources of uncertainty (dark uncertainty). We contrast two different approaches to take dark uncertainty into account both in the computation of consensus values and in the evaluation of the associated uncertainty, which have traditionally been preferred by different scientific communities. One inflates the stated uncertainties by a multiplicative factor. The other adds laboratory-specific ‘effects’ to the value of the measurand. After distinguishing what we call recipe-based and model-based approaches to data reductions in interlaboratory studies, we state six guiding principles that should inform such reductions. These principles favor model-based approaches that expose and facilitate the critical assessment of validating assumptions, and give preeminence to substantive criteria to determine which measurement results to include, and which to exclude, as opposed to purely statistical considerations, and also how to weigh them. Following an overview of maximum likelihood methods, three general purpose procedures for data reduction are described in detail, including explanations of how the consensus value and degrees of equivalence are computed, and the associated uncertainty evaluated: the DerSimonian-Laird procedure; a hierarchical Bayesian

RNAV STAR Procedural Adherence

NASA Technical Reports Server (NTRS)

Matthews, Bryan L.; Stewart, Michael J.

2017-01-01

Flight crews and air traffic controllers have reported many safety concerns regarding area navigation standard terminal arrival routes (RNAV STARs). However, our information sources to quantify these issues are limited to subjective reporting and time consuming case-by-case investigations. This work is a preliminary study into the objective performance of instrument procedures and provides a framework to track procedural concepts and assess design functionality. We created a tool and analysis methods for gauging aircraft adherence as it relates to RNAV STARs. This information is vital for comprehensive understanding of how our air traffic behaves. In this exploratory archival study, we mined the performance of 24 major US airports over the preceding three years. Overlaying radar track data on top of RNAV STAR routes provided a comparison between aircraft flight paths and the waypoint positions and altitude restrictions. NASA Ames Supercomputing resources were utilized to perform the data mining and processing. We assessed STARs by lateral transition path (full-lateral), vertical restrictions (full-lateralfull-vertical), and skipped waypoints (skips). In addition, we graphed aircraft altitudes relative to the altitude restrictions and their occurrence rates. Full-lateral adherence was generally greater than Full-lateralfull-vertical, but the difference between the rates was not always consistent. Full-lateralfull-vertical adherence medians of the 2016 procedures ranged from 0 in KDEN (Denver) to 21 in KMEM (Memphis). Waypoint skips ranged from 0 to nearly 100 for specific waypoints. Altitudes restrictions were sometimes missed by systematic amounts in 1000 ft. increments from the restriction, creating multi-modal distributions. Other times, altitude misses looked to be more normally distributed around the restriction. This tool may aid in providing acceptability metrics as well as risk assessment information.

A Comparison of Procedures for Content-Sensitive Item Selection in Computerized Adaptive Tests.

ERIC Educational Resources Information Center

Kingsbury, G. Gage; Zara, Anthony R.

1991-01-01

This simulation investigated two procedures that reduce differences between paper-and-pencil testing and computerized adaptive testing (CAT) by making CAT content sensitive. Results indicate that the price in terms of additional test items of using constrained CAT for content balancing is much smaller than that of using testlets. (SLD)

Education-Based Incarceration and Recidivism: The Ultimate Social Justice Crime Fighting Tool. Educational Leadership for Social Justice

ERIC Educational Resources Information Center

Fitch, Brian D., Ed.; Normore, Anthony H., Ed.

2012-01-01

Education-Based Incarceration and Recidivism: The Ultimate Social Justice Crime Fighting Tool takes a penetrating look at the needs and challenges of society's disenfranchised jail populations. It is incumbent to encourage public awareness of the causes that underlie the destructive cycles plaguing these populations, including the abuse and…

ARSENIC (III) METHYLATED SPECIES REACT WITH DNA DIRECTLY AND COULD BE PROXIMATED/ULTIMATE GENOTOXIC FORMS OF ARSENIC

EPA Science Inventory

ARSENIC(III) METHYLATED SPECIES REACT WITH DNA DIRECTL Y AND COULD BE PROXIMATE/ULTIMATE GENOTOXIC FORMS OF ARSENIC


Arsenite and arsenate (iAs, inorganic arsenic) have been thought to act as genotoxicants without reacting directly with DNA; neither iAs nor As(V) m...

Functional comparison of microarray data across multiple platforms using the method of percentage of overlapping functions.

PubMed

Li, Zhiguang; Kwekel, Joshua C; Chen, Tao

2012-01-01

Functional comparison across microarray platforms is used to assess the comparability or similarity of the biological relevance associated with the gene expression data generated by multiple microarray platforms. Comparisons at the functional level are very important considering that the ultimate purpose of microarray technology is to determine the biological meaning behind the gene expression changes under a specific condition, not just to generate a list of genes. Herein, we present a method named percentage of overlapping functions (POF) and illustrate how it is used to perform the functional comparison of microarray data generated across multiple platforms. This method facilitates the determination of functional differences or similarities in microarray data generated from multiple array platforms across all the functions that are presented on these platforms. This method can also be used to compare the functional differences or similarities between experiments, projects, or laboratories.

Comparison of different grinding procedures on the flexural strength of zirconia.

PubMed

Işeri, Ufuk; Ozkurt, Zeynep; Yalnız, Ayşe; Kazazoğlu, Ender

2012-05-01

The surface of zirconia ceramic is damaged during grinding, which may affect the mechanical properties of the material. The purpose of this study was to compare the biaxial flexural strength of zirconia after different grinding procedures and to measure the temperature rise from grinding. Forty disk-shaped zirconia specimens (15 × 1.2 mm) with a smaller disk in the center of each disk (1 × 3 mm) were divided into 4 groups (n=10). The specimens were ground with a high-speed handpiece and micromotor with 2 different grinding protocols, continual grinding and periodic grinding (10 seconds grinding with 10 seconds duration), until the smaller disk was removed. Control specimens without the center disk (n=10) were analyzed without grinding. The biaxial flexural strengths of the disks were determined in a universal testing machine at a crosshead speed of 0.5 mm/min. The fracture strength (MPa) was recorded, and the results were analyzed using a 1-way ANOVA, Tukey HSD test, Student's t test, and Pearson correlation test (α=05). All grinding procedures significantly decreased flexural strength (P<.01). The mean flexural strength of the high-speed handpiece groups was higher (815 MPa) than that of the micromotor groups (718 MPa). The temperature values obtained from micromotor grinding (127°C) were significantly higher than those from high-speed handpiece grinding (63°C) (P<.01). Grinding zirconia decreased flexural strength. Zirconia material ground with a high-speed handpiece run continually caused the least reduction in flexural strength. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

A comparison of parecoxib and thoracic epidural analgesia for postoperative analgesia following Nuss procedure.

PubMed

Yang, Wendy; Ming, Yung-Ching; Kau, Yi-Chuan; Liao, Chia-Chih; Tsai, Shih-Chang; Wong, Kit-Man; Wong, Shu-Yam; Lai, Jin-Yao

2015-12-01

The purpose of this study was to compare the results of thoracic epidural analgesia (TEA) and parecoxib in controlling postoperative pain after the Nuss procedure. Between August 2005 and July 2014, 120 adolescents and adults underwent Nuss procedures and received either TEA or parecoxib for postoperative pain control. Demographic data, preoperative preparation times, visual analog scale (VAS) pain scores from postoperative day 1 to day 5, medical costs of pain control, days to Foley catheter removal, days to being able to sit up, days to being able to walk, days of hospital stay, nausea/vomiting scores, and complications related to pain control were compared. A total of 106 patients received TEA, and 14 received parecoxib. No between-group differences in demographics were observed. Patients in the parecoxib group had shorter preparation times (p<0.001), lower VAS pain scores from postoperative day 2 to day 5 (day 2, p=0.006; day 3, p=0.006; day 4, p<0.001; day 5, p<0.001), shorter hospital stays (p<0.001), lower pain control costs (p<0.001), and lower nausea/vomiting scores (p=0.046). For adolescents and adults undergoing the Nuss procedure, parecoxib affords better pain control efficacy, a shorter hospital stay, lower medical pain control costs, and fewer side effects compared with TEA. Copyright © 2015 Elsevier Inc. All rights reserved.

Ballastic signature identification systems study

NASA Technical Reports Server (NTRS)

Reich, A.; Hine, T. L.

1976-01-01

The results are described of an attempt to establish a uniform procedure for documenting (recording) expended bullet signatures as effortlessly as possible and to build a comprehensive library of these signatures in a form that will permit the automated comparison of a new suspect bullet with the prestored library. The ultimate objective is to achieve a standardized format that will permit nationwide interaction between police departments, crime laboratories, and other interested law enforcement agencies.

An automatic identification procedure to promote the use of FES-cycling training for hemiparetic patients.

PubMed

Ambrosini, Emilia; Ferrante, Simona; Schauer, Thomas; Ferrigno, Giancarlo; Molteni, Franco; Pedrocchi, Alessandra

2014-01-01

Cycling induced by Functional Electrical Stimulation (FES) training currently requires a manual setting of different parameters, which is a time-consuming and scarcely repeatable procedure. We proposed an automatic procedure for setting session-specific parameters optimized for hemiparetic patients. This procedure consisted of the identification of the stimulation strategy as the angular ranges during which FES drove the motion, the comparison between the identified strategy and the physiological muscular activation strategy, and the setting of the pulse amplitude and duration of each stimulated muscle. Preliminary trials on 10 healthy volunteers helped define the procedure. Feasibility tests on 8 hemiparetic patients (5 stroke, 3 traumatic brain injury) were performed. The procedure maximized the motor output within the tolerance constraint, identified a biomimetic strategy in 6 patients, and always lasted less than 5 minutes. Its reasonable duration and automatic nature make the procedure usable at the beginning of every training session, potentially enhancing the performance of FES-cycling training.

Evaluating Patient-Centered Outcomes in Clinical Trials of Procedural Sedation, Part 2 Safety: Sedation Consortium on Endpoints and Procedures for Treatment, Education, and Research Recommendations.

PubMed

Ward, Denham S; Williams, Mark R; Berkenbosch, John W; Bhatt, Maala; Carlson, Douglas; Chappell, Phillip; Clark, Randall M; Constant, Isabelle; Conway, Aaron; Cravero, Joseph; Dahan, Albert; Dexter, Franklin; Dionne, Raymond; Dworkin, Robert H; Gan, Tong J; Gozal, David; Green, Steven; Irwin, Michael G; Karan, Suzanne; Kochman, Michael; Lerman, Jerrold; Lightdale, Jenifer R; Litman, Ronald S; Mason, Keira P; Miner, James; O'Connor, Robert E; Pandharipande, Pratik; Riker, Richard R; Roback, Mark G; Sessler, Daniel I; Sexton, Anne; Tobin, Joseph R; Turk, Dennis C; Twersky, Rebecca S; Urman, Richard D; Weiss, Mark; Wunsch, Hannah; Zhao-Wong, Anna

2018-05-17

The Sedation Consortium on Endpoints and Procedures for Treatment, Education, and Research, established by the Analgesic, Anesthetic, and Addiction Clinical Trial Translations, Innovations, Opportunities, and Networks, a public-private partnership with the US Food and Drug Administration, convened a second meeting of sedation experts from a variety of clinical specialties and research backgrounds to develop recommendations for procedural sedation research. The previous meeting addressed efficacy and patient- and/or family-centered outcomes. This meeting addressed issues of safety, which was defined as "the avoidance of physical or psychological harm." A literature review identified 133 articles addressing safety measures in procedural sedation clinical trials. After basic reporting of vital signs, the most commonly measured safety parameter was oxygen saturation. Adverse events were inconsistently defined throughout the studies. Only 6 of the 133 studies used a previously validated measure of safety. The meeting identified methodological problems associated with measuring infrequent adverse events. With a consensus discussion, a set of core and supplemental measures were recommended to code for safety in future procedural clinical trials. When adopted, these measures should improve the integration of safety data across studies and facilitate comparisons in systematic reviews and meta-analyses.

Volcanic ash cloud detection from space: a preliminary comparison between RST approach and water vapour corrected BTD procedure

NASA Astrophysics Data System (ADS)

Piscini, Alessandro; Marchese, Francesco; Merucci, Luca; Pergola, Nicola; Corradini, Stefano; Tramutoli, Valerio

2010-05-01

Volcanic eruptions can inject large amounts (Tg) of gas and particles into the troposphere and, sometimes, into the stratosphere. Besides the main gases (H2O, CO2 , SO2 and HCl), volcanic clouds contain a mix of silicate ash particles in the size range 0.1μm to mm or larger. Interest in the ash presence detection is high in particular because it represents a serious hazard for air traffic. Particles with dimension of several millimeters can damage the aircraft structure (windows, wings, ailerons), while particles less than 10μm may be extremely dangerous for the jet engines and are undetectable by the pilots during night or in low visibility conditions. Satellite data are useful for measuring volcanic clouds because of the large vertical range of these emissions and their likely large horizontal spread. Moreover, since volcanoes are globally distributed and inherently dangerous, satellite measurements offer a practical and safe platform from which to make observations. Two different techniques used to detect volcanic clouds from satellite data are considered here for a preliminary comparison, with possible implications on quantitative retrievals of plume parameters. In particular, the Robust Satellite Techniques (RST) approach and a water vapour corrected version of the Brightness Temperature Difference (BTD) procedure, will be compared. The RST approach is based on the multi-temporal analysis of historical, long-term satellite records, devoted to a former characterization of the measured signal, in terms of expected value and natural variability and a further recognition of signal anomalies by an automatic, unsupervised change detection step. The BTD method is based on the difference between the brightness temperature measured in two channels centered around 11 and 12 mm. To take into account the atmospheric water vapour differential absorption in the 11-12 μm spectral range that tends to reduce (and in some cases completely mask) the BTD signal, a water vapor

Digital exchange of graphic arts material: the ultimate challenge

NASA Astrophysics Data System (ADS)

McDowell, David Q.

1996-02-01

The digital exchange of graphic arts material - particularly advertising material for publications- in an open standardized environment represents the ultimate challenge for electronic data exchange. To meet the needs of publication advertising, the graphic arts industry must be able to transmit advertisements in an open environment where there are many senders and many receivers of the material. The material being transmitted consists of combinations of pictorial material, text, and line art with these elements superimposed on top of each other and/or interrelated in complex ways. The business relationships established by the traditional workflow environment, the combination of aesthetic and technical requirements, and the large base of existing hardware and software play a major role in limiting the options available. Existing first- and second-generation standards are focused on the CEPS environment, which operates on and stores data as raster files. The revolution in personal computer hardware and software, and the acceptance of these tools by the graphic arts community, dictates that standards must also be created and implemented for this world of vector/raster-based systems. The requirements for digital distribution of advertising material for publications, the existing graphic arts standards base, and the anticipation of future standards developments in response to these needs are explored.

Digital exchange of graphic arts material: the ultimate challenge

NASA Astrophysics Data System (ADS)

McDowell, David Q.

1996-01-01

The digital exchange of graphic arts material -- particularly advertising material for publications -- in an open standardized environment represents the ultimate challenge for electronic data exchange. To meet the needs of publication advertising, the graphic arts industry must be able to transmit advertisements in an open environment where there are many senders and many receivers of the material. The material being transmitted consists of combinations of pictorial material, text, and line art with these elements superimposed on top of each other and/or interrelated in complex ways. The business relationships established by the traditional workflow environment, the combination of aesthetic and technical requirements, and the large base of existing hardware and software play a major role in limiting the options available. Existing first- and second-generation standards are focused on the CEPS environment, which operates on and stores data as raster files. The revolution in personal computer hardware and software, and the acceptance of these tools by the graphic arts community, dictates that standards must also be created and implemented for this world of vector/raster-based systems. The requirements for digital distribution of advertising material for publications, the existing graphic arts standards base, and the anticipation of future standards developments in response to these needs are explored.

[Super Liquid Crystalline Polysaccharides Produced by Ultimately-ecological Microreactors].

PubMed

Kaneko, Tatsuo; Okajima, Maiko K

2018-01-01

　Cyanobacteria fix carbon dioxide and nitrogen from the atmosphere using solar energy to produce various biomolecules, and thus are regarded as ultimately ecological microreactors. Sacran is a cyanobacterial polysaccharide with a very high molecular weight of 29 Mg/mol, which is extracted from Aphanothece sacrum cyanobacterium mass-cultivated in freshwater environments such as river or spring. Sacran is a water-soluble heteropolysaccharide comprising more than 6 kinds of sugar residues and contains 12% sulfate anionic groups and 27% carboxyls. Sacran has a super-absorbent function of water, which can retain 6000 mL for 1 g specimen, due to very long hydrating chains. The value is much higher than hyaluronic acid or conventional super-absorbent polymers. Sacran exhibits self-orienting behavior in dilute solution at a concentration range over 0.25 wt%, which is quite low when compared with conventional liquid crystalline polysaccharides. Mesogenic helical chains of sacrans have extremely high aspect ratios of 1600 for highly persistent lengths of 32 micrometer. Through the liquid crystallinity, sacran solution shows a shear-thinning behavior and the solution spread over a substrate such as biological skin very efficiently to create a thin layer. Applied on atopic dermatitis skin sacran solution exerts excellent moisturizing effect and anti-itching action.

Launching GUPPI: the Green Bank Ultimate Pulsar Processing Instrument

NASA Astrophysics Data System (ADS)

DuPlain, Ron; Ransom, Scott; Demorest, Paul; Brandt, Patrick; Ford, John; Shelton, Amy L.

2008-08-01

The National Radio Astronomy Observatory (NRAO) is launching the Green Bank Ultimate Pulsar Processing Instrument (GUPPI), a prototype flexible digital signal processor designed for pulsar observations with the Robert C. Byrd Green Bank Telescope (GBT). GUPPI uses field programmable gate array (FPGA) hardware and design tools developed by the Center for Astronomy Signal Processing and Electronics Research (CASPER) at the University of California, Berkeley. The NRAO has been concurrently developing GUPPI software and hardware using minimal software resources. The software handles instrument monitor and control, data acquisition, and hardware interfacing. GUPPI is currently an expert-only spectrometer, but supports future integration with the full GBT production system. The NRAO was able to take advantage of the unique flexibility of the CASPER FPGA hardware platform, develop hardware and software in parallel, and build a suite of software tools for monitoring, controlling, and acquiring data with a new instrument over a short timeline of just a few months. The NRAO interacts regularly with CASPER and its users, and GUPPI stands as an example of what reconfigurable computing and open-source development can do for radio astronomy. GUPPI is modular for portability, and the NRAO provides the results of development as an open-source resource.

Inverse boundary-layer theory and comparison with experiment

NASA Technical Reports Server (NTRS)

Carter, J. E.

1978-01-01

Inverse boundary layer computational procedures, which permit nonsingular solutions at separation and reattachment, are presented. In the first technique, which is for incompressible flow, the displacement thickness is prescribed; in the second technique, for compressible flow, a perturbation mass flow is the prescribed condition. The pressure is deduced implicitly along with the solution in each of these techniques. Laminar and turbulent computations, which are typical of separated flow, are presented and comparisons are made with experimental data. In both inverse procedures, finite difference techniques are used along with Newton iteration. The resulting procedure is no more complicated than conventional boundary layer computations. These separated boundary layer techniques appear to be well suited for complete viscous-inviscid interaction computations.

Comparative evaluation of stress levels before, during, and after periodontal surgical procedures with and without nitrous oxide-oxygen inhalation sedation.

PubMed

Sandhu, Gurkirat; Khinda, Paramjit Kaur; Gill, Amarjit Singh; Singh Khinda, Vineet Inder; Baghi, Kamal; Chahal, Gurparkash Singh

2017-01-01

Periodontal surgical procedures produce varying degree of stress in all patients. Nitrous oxide-oxygen inhalation sedation is very effective for adult patients with mild-to-moderate anxiety due to dental procedures and needle phobia. The present study was designed to perform periodontal surgical procedures under nitrous oxide-oxygen inhalation sedation and assess whether this technique actually reduces stress physiologically, in comparison to local anesthesia alone (LA) during lengthy periodontal surgical procedures. This was a randomized, split-mouth, cross-over study. A total of 16 patients were selected for this randomized, split-mouth, cross-over study. One surgical session (SS) was performed under local anesthesia aided by nitrous oxide-oxygen inhalation sedation, and the other SS was performed on the contralateral quadrant under LA. For each session, blood samples to measure and evaluate serum cortisol levels were obtained, and vital parameters including blood pressure, heart rate, respiratory rate, and arterial blood oxygen saturation were monitored before, during, and after periodontal surgical procedures. Paired t -test and repeated measure ANOVA. The findings of the present study revealed a statistically significant decrease in serum cortisol levels, blood pressure and pulse rate and a statistically significant increase in respiratory rate and arterial blood oxygen saturation during periodontal surgical procedures under nitrous oxide inhalation sedation. Nitrous oxide-oxygen inhalation sedation for periodontal surgical procedures is capable of reducing stress physiologically, in comparison to LA during lengthy periodontal surgical procedures.

Comparison of "saw and seal" procedure and performance grade binder to minimize thermal cracking.

DOT National Transportation Integrated Search

2001-04-01

In an effort to compare performance and cost effectiveness of the Saw and : Seal procedure and Performance Grade (PG) binders, the Maine Department Of : Transportation (MDOT) constructed an experimental project in Weston, Maine : during the fal...

Carotid Artery Stenting – Strategies to Improve Procedural Performance and Reduce the Learning Curve

PubMed Central

Van Herzeele, Isabelle

2013-01-01

Carotid artery stenting (CAS) remains an appealing intervention to reduce the stroke risk because of its minimal invasive nature. Nevertheless, landmark randomised controlled trials have not been able to resolve the controversies surrounding this complex procedure as the peri-operative stroke risk in a non-selected patient population still seems to be higher after CAS in comparison to carotid endarterectomy. What is more, these trials have highlighted that patient outcome after CAS is influenced by patient- and operator-dependant factors. The CAS procedure exhibits a definitive learning curve resulting in higher complication rates if the procedure is performed by inexperienced interventionists or in low-volume centres. This article will outline strategies to improve the performance of physicians carrying out the CAS procedure by means of proficiency-based training, credentialing, virtual reality rehearsal and optimal patient selection. PMID:29588751

The Validity of Selection and Classification Procedures for Predicting Job Performance.

DTIC Science & Technology

1987-04-01

lacholual or pulley Issues. They cemmunicate Me resulls of special analyses, Iantrim rp or phses of a teak, ad hasm quick macton werk. Paperm r reviw ...51 I. Alternative Selection Procedures ................. 56 J. Meta-Analyses of Validities ............. 58 K . Meta-Analytic Comparisons of...Aptitude Test Battery GM General Maintenance GS General Science GVN Cognitive Ability HS&T Health, Social and Technology K Motor Coordination KFM

Pancreaticoduodenectomy for pancreatic head cancer: PPPD versus Whipple procedure.

PubMed

Lin, Pin-Wen; Shan, Yan-Shen; Lin, Yih-Jyh; Hung, Chung-Jye

2005-01-01

Resectable carcinoma of the head of the pancreas can be treated with either standard (the Whipple) or pylorus-preserving pancreaticoduodenectomy (PPPD). Only a few reports compared the differences between these two procedures. From July 1994 to Oct 2002, a prospective randomized comparison between the Whipple procedure and PPPD done by the same surgeon for the patients with carcinoma of the head of the pancreas was conducted. Thirty-six patients diagnosed as pancreatic head adenocarcinoma were randomized to receive either the Whipple procedure or a PPPD. Three patients initially randomized to have a PPPD were converted to the Whipple procedure due to gross duodenal involvement. Finally, 19 patients received the Whipple procedure, 14 patients underwent PPPD and three patients had conversion. Two perioperative deaths in the Whipple group and one perioperative death in PPPD resulted in an 8 percent mortality rate in the 36 patients. Median duration of the Whipple operation was 265 (range 203-475) min with a median blood loss of 570 (50-8540) mL. In the patients who had PPPD, median operating time was 232 (range 165-270) min, and median blood loss was 375 (range 100-1300) mL. There was one minor leak from the pancreaticojejunostomy in each group, resulting in a 5.5 percent minor leak in 36 patients. These outcomes were not significantly different. Delayed gastric emptying was observed more frequently after PPPD (six of 14 patients) than after the Whipple procedure (none of 19 patients) (P < 0.05). There was no significant difference between the Whipple procedure and PPPD in terms of median survival and 5-year survival rate. The median survival time was 16.0 months and 5-year survival rate was 9.4 percent in the 36 patients. Blood loss during operation influenced the prognosis. There was no significant difference between the Whipple procedure and PPPD for the treatment of pancreatic head cancer in terms of operating time, blood loss, operative mortality and long

Biomimetics and the Development of Humanlike Robots as the Ultimate Challenge

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph

2011-01-01

Evolution led to effective solutions to nature's challenges and they were improved over millions of years. Humans have always made efforts to use nature as a model for innovation and problems solving. These efforts became more intensive in recent years where systematic studies of nature are being made towards better understanding and applying more sophisticated capabilities. Making humanlike robots, including the appearance, functions and intelligence, poses the ultimate challenges to biomimetics. For many years, making such robots was considered science fiction, but as a result of significant advances in biologically inspired technologies, such robots are increasingly becoming an engineering reality. There are already humanlike robots that walk, talk, interpret speech, make eye-contact and facial expressions, as well as perform many other humanlike functions. In this paper, the state-of-the-art of humanlike robots, potential applications and issues of concern will be reviewed.

Due process model of procedural justice in performance appraisal: promotion versus termination scenarios.

PubMed

Kataoka, Heloneida C; Cole, Nina D; Flint, Douglas A

2006-12-01

In a laboratory study, 318 student participants (148 male, 169 female, and one who did not report sex; M age 25.0, SD = 6.0) in introductory organizational behavior classes responded to scenarios in which performance appraisal resulted in either employee promotion or termination. Each scenario had varying levels of three procedural justice criteria for performance appraisal. For both promotion and termination outcomes, analysis showed that, as the number of criteria increased, perceptions of procedural fairness increased. A comparison between the two outcomes showed that perceptions of fairness were significantly stronger for the promotion outcome than for termination.

ACIS Door Failure Investigation and Mitigation Procedures

NASA Technical Reports Server (NTRS)

Podgorski, William A.; Tice, Neil W.; Plucinsky, Paul P.

2000-01-01

NASA's Chandra X-ray Observatory (formerly AXAF) was launched on July 23, 1999 and is currently in orbit performing scientific studies. Chandra is the third of NASA's Great Observatories to be launched, following the Hubble Space Telescope and the Compton Gamma Ray Observatory. One of four primary science instruments on Chandra, and one of only two focal plane instruments, is the Advanced CCD Imaging Spectrometer, or ACIS. The ACIS focal plane and Optical Blocking Filter (OBF) must be launched under vacuum, so a tightly sealed, functioning door and venting subsystem were implemented. The door was opened two and one-half weeks after launch (after most out-gassing of composite materials) and allowed X-rays to be imaged by the ACIS CCD's in the focal plane. A failure of this door to open on-orbit would have eliminated all ACIS capabilities, severely degrading mission science. During the final pre-flight thermal-vacuum test of the fully integrated Chandra Observatory at TRW, the ACIS door failed to open when commanded to do so. This paper describes the efforts, under considerable time pressure, by NASA, its contractors and outside review teams to investigate the failure and to develop modified hardware and procedures which would correct the problem. Of interest is the fact that the root cause of the test failure was never clearly identified despite massive effort. We ultimately focussed on hardware and procedures designed to mitigate the effects of potential, but unproven, failure modes. We describe a frequent real-world engineering situation in which one must proceed on the best basis possible in the absence of the complete set of facts.

SUPPLEMENTARY COMPARISON: COOMET.RI(II)-S1.Rn-222 (169/UA/98): Rn-222 volume activity comparison

NASA Astrophysics Data System (ADS)

Skliarov, V.; Röttger, A.; Honig, A.; Korostin, S.; Kuznetsov, S.; Lapenas, A.; Milevsky, V.; Ivaniukovich, A.; Kharitonov, I.; Sepman, S.

2009-01-01

According to a first program, a supplementary comparison of Rn-222 volume activity was drawn up as a bilateral supplementary comparison between NSC 'Institute of Metrology', Ukraine, and VNIIFTRI, Russia. It took place in March 2005. In April 2005, at the 5th meeting of COOMET held in Braunschweig (Germany), representatives of these institutes exchanged data which showed the comparability of the national standards of Ukraine and Russia for the check points. During the discussion of the procedure some other institutes decided to join the comparison program, which was extended to BelGIM (Belarus), PTB (Germany), VNIIM (Russia) and RMTC (Latvia). The national standards of volume activity of radon-222 were thus calibrated using one standard radon radiometer as the transfer standard. Results are shown in the Final Report of the comparison. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by COOMET, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Molprobity's ultimate rotamer-library distributions for model validation.

PubMed

Hintze, Bradley J; Lewis, Steven M; Richardson, Jane S; Richardson, David C

2016-09-01

Here we describe the updated MolProbity rotamer-library distributions derived from an order-of-magnitude larger and more stringently quality-filtered dataset of about 8000 (vs. 500) protein chains, and we explain the resulting changes and improvements to model validation as seen by users. To include only side-chains with satisfactory justification for their given conformation, we added residue-specific filters for electron-density value and model-to-density fit. The combined new protocol retains a million residues of data, while cleaning up false-positive noise in the multi- χ datapoint distributions. It enables unambiguous characterization of conformational clusters nearly 1000-fold less frequent than the most common ones. We describe examples of local interactions that favor these rare conformations, including the role of authentic covalent bond-angle deviations in enabling presumably strained side-chain conformations. Further, along with favored and outlier, an allowed category (0.3-2.0% occurrence in reference data) has been added, analogous to Ramachandran validation categories. The new rotamer distributions are used for current rotamer validation in MolProbity and PHENIX, and for rotamer choice in PHENIX model-building and refinement. The multi-dimensional χ distributions and Top8000 reference dataset are freely available on GitHub. These rotamers are termed "ultimate" because data sampling and quality are now fully adequate for this task, and also because we believe the future of conformational validation should integrate side-chain with backbone criteria. Proteins 2016; 84:1177-1189. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

House officer procedure documentation using a personal digital assistant: a longitudinal study

PubMed Central

Bird, Steven B; Lane, David R

2006-01-01

Background Personal Digital Assistants (PDAs) have been integrated into daily practice for many emergency physicians and house officers. Few objective data exist that quantify the effect of PDAs on documentation. The objective of this study was to determine whether use of a PDA would improve emergency medicine house officer documentation of procedures and patient resuscitations. Methods Twelve first-year Emergency Medicine (EM) residents were provided a Palm V (Palm, Inc., Santa Clara, California, USA) PDA. A customizable patient procedure and encounter program was constructed and loaded into each PDA. Residents were instructed to enter information on patients who had any of 20 procedures performed, were deemed clinically unstable, or on whom follow-up was obtained. These data were downloaded to the residency coordinator's desktop computer on a weekly basis for 36 months. The mean number of procedures and encounters performed per resident over a three year period were then compared with those of 12 historical controls from a previous residency class that had recorded the same information using a handwritten card system for 36 months. Means of both groups were compared a two-tailed Student's t test with a Bonferroni correction for multiple comparisons. One hundred randomly selected entries from both the PDA and handwritten groups were reviewed for completeness. Another group of 11 residents who had used both handwritten and PDA procedure logs for one year each were asked to complete a questionnaire regarding their satisfaction with the PDA system. Results Mean documentation of three procedures significantly increased in the PDA vs handwritten groups: conscious sedation 24.0 vs 0.03 (p = 0.001); thoracentesis 3.0 vs 0.0 (p = 0.001); and ED ultrasound 24.5 vs. 0.0 (p = 0.001). In the handwritten cohort, only the number of cardioversions/defibrillations (26.5 vs 11.5) was statistically increased (p = 0.001). Of the PDA entries, 100% were entered completely, compared to

Using video-oriented instructions to speed up sequence comparison.

PubMed

Wozniak, A

1997-04-01

This document presents an implementation of the well-known Smith-Waterman algorithm for comparison of proteic and nucleic sequences, using specialized video instructions. These instructions, SIMD-like in their design, make possible parallelization of the algorithm at the instruction level. Benchmarks on an ULTRA SPARC running at 167 MHz show a speed-up factor of two compared to the same algorithm implemented with integer instructions on the same machine. Performance reaches over 18 million matrix cells per second on a single processor, giving to our knowledge the fastest implementation of the Smith-Waterman algorithm on a workstation. The accelerated procedure was introduced in LASSAP--a LArge Scale Sequence compArison Package software developed at INRIA--which handles parallelism at higher level. On a SUN Enterprise 6000 server with 12 processors, a speed of nearly 200 million matrix cells per second has been obtained. A sequence of length 300 amino acids is scanned against SWISSPROT R33 (1,8531,385 residues) in 29 s. This procedure is not restricted to databank scanning. It applies to all cases handled by LASSAP (intra- and inter-bank comparisons, Z-score computation, etc.

A comparison of procedures for unpairing conditioned reflexive motivating operations.

PubMed

Kettering, Tracy L; Neef, Nancy A; Kelley, Michael E; Heward, William L

2018-03-01

This study compared the effectiveness of two procedures to reduce behavior evoked by a reflexive conditioned motivating operation (CMO-R). Task demands were shown to evoke escape-maintained problem behavior for 4 students with disabilities. Alternative communication responses were taught as an appropriate method to request escape and this treatment combined with extinction for problem behavior led to decreases in problem behavior for all students. A beeping timer was then arranged to temporally precede the task demand to create a CMO-R that evoked communication responses. When data showed that the sound of the timer was functioning as a CMO-R, two methods to reduce behavior evoked by a CMO-R-extinction unpairing and noncontingent unpairing-were evaluated. Results indicated that noncontingent unpairing was an effective method to reduce the evocative effects of the CMO-R. Extinction produced unsystematic effects across participants. Results are discussed in terms of abolishing CMOs and the implications of CMOs. © 2018 Society for the Experimental Analysis of Behavior.

Storage as a Metric of Catchment Comparison

USGS Publications Warehouse

McNamara, J.P.; Tetzlaff, D.; Bishop, K.; Soulsby, C.; Seyfried, M.; Peters, N.E.; Aulenbach, Brent T.; Hooper, R.

2011-01-01

The volume of water stored within a catchment, and its partitioning among groundwater, soil moisture, snowpack, vegetation, and surface water are the variables that ultimately characterize the state of the hydrologic system. Accordingly, storage may provide useful metrics for catchment comparison. Unfortunately, measuring and predicting the amount of water present in a catchment is seldom done; tracking the dynamics of these stores is even rarer. Storage moderates fluxes and exerts critical controls on a wide range of hydrologic and biologic functions of a catchment. While understanding runoff generation and other processes by which catchments release water will always be central to hydrologic science, it is equally essential to understand how catchments retain water. We have initiated a catchment comparison exercise to begin assessing the value of viewing catchments from the storage perspective. The exercise is based on existing data from five watersheds, no common experimental design, and no integrated modelling efforts. Rather, storage was estimated independently for each site. This briefing presents some initial results of the exercise, poses questions about the definitions and importance of storage and the storage perspective, and suggests future directions for ongoing activities. ?? 2011 John Wiley & Sons, Ltd.

A comparison of the Monti and spiral Monti procedures: A long-term analysis.

PubMed

Whittam, B M; Szymanski, K M; Flack, C; Misseri, R; Kaefer, M; Rink, R C; Cain, M P

2015-06-01

The Monti ileovesicostomy provides an excellent substitution for an appendicovesicostomy when the appendix is unavailable or suitable for use. The spiral Monti is a useful modification to the traditional Monti as it allows creation of a longer channel when needed. In 2007, the short-term outcomes were reported; they compared traditional and spiral Monti in 188 patients with an average follow-up of 43 months. In the present population, a total of 25 subfasical revisions were performed in 21 patients: nine (8.3%) subfascial revisions in the traditional Monti (TM) patients and 12 (15.2%) subfascial revisions in the spiral Monti (SM) patients. The study found an increased risk of subfascial revisions of either TM or SM when the stoma was located at the umbilicus versus right lower quadrant (16.8% vs 6.3%, P < 0.05). On subgroup analysis, this increased subfascial revision rate appeared to be driven by SM channels to the umbilicus rather than other stomal locations, but this trend was not statistically significant. It was hypothesized that with longer follow-up, the spiral Monti would require more subfascial revisions due to progressive lengthening of the channel. A retrospective chart review was performed for all patients undergoing a traditional Monti (TM) or spiral Monti (SM) procedure at the present institution (1997-2013). Patient demographics, bowel segment used, stomal location, channel or stomal revisions, number of anesthetic endoscopic procedures performed, and indications for revision were reviewed. Kaplan-Meier analysis and Cox proportional hazards modeling was used for analysis. Of the 296 patients identified, 146 had Monti procedures and 150 had spiral Monti procedures (median follow-up 7.7 years). Median age at surgery was 10.6 years. Myelomeningocele was the most common underlying cause of neuropathic bladder, totaling 169 (57.1%) patients. Stomas were located at the umbilicus (106, 35.8%), right lower quadrant (183, 61.8%) and left lower quadrant (seven

Transport of Space Environment Electrons: A Simplified Rapid-Analysis Computational Procedure

NASA Technical Reports Server (NTRS)

Nealy, John E.; Anderson, Brooke M.; Cucinotta, Francis A.; Wilson, John W.; Katz, Robert; Chang, C. K.

2002-01-01

A computational procedure for describing transport of electrons in condensed media has been formulated for application to effects and exposures from spectral distributions typical of electrons trapped in planetary magnetic fields. The procedure is based on earlier parameterizations established from numerous electron beam experiments. New parameterizations have been derived that logically extend the domain of application to low molecular weight (high hydrogen content) materials and higher energies (approximately 50 MeV). The production and transport of high energy photons (bremsstrahlung) generated in the electron transport processes have also been modeled using tabulated values of photon production cross sections. A primary purpose for developing the procedure has been to provide a means for rapidly performing numerous repetitive calculations essential for electron radiation exposure assessments for complex space structures. Several favorable comparisons have been made with previous calculations for typical space environment spectra, which have indicated that accuracy has not been substantially compromised at the expense of computational speed.

Kansas Department of Transportation column expert : ultimate shear capacity of circular columns using the simplified modified compression field theory.

DOT National Transportation Integrated Search

2015-09-01

The importance of the analysis of circular columns to accurately predict their ultimate confined : capacity under shear-flexure-axial force interaction domain is recognized in light of the extreme load event : imposed by the current American Associat...

Ultimate open pit stochastic optimization

NASA Astrophysics Data System (ADS)

Marcotte, Denis; Caron, Josiane

2013-02-01

Classical open pit optimization (maximum closure problem) is made on block estimates, without directly considering the block grades uncertainty. We propose an alternative approach of stochastic optimization. The stochastic optimization is taken as the optimal pit computed on the block expected profits, rather than expected grades, computed from a series of conditional simulations. The stochastic optimization generates, by construction, larger ore and waste tonnages than the classical optimization. Contrary to the classical approach, the stochastic optimization is conditionally unbiased for the realized profit given the predicted profit. A series of simulated deposits with different variograms are used to compare the stochastic approach, the classical approach and the simulated approach that maximizes expected profit among simulated designs. Profits obtained with the stochastic optimization are generally larger than the classical or simulated pit. The main factor controlling the relative gain of stochastic optimization compared to classical approach and simulated pit is shown to be the information level as measured by the boreholes spacing/range ratio. The relative gains of the stochastic approach over the classical approach increase with the treatment costs but decrease with mining costs. The relative gains of the stochastic approach over the simulated pit approach increase both with the treatment and mining costs. At early stages of an open pit project, when uncertainty is large, the stochastic optimization approach appears preferable to the classical approach or the simulated pit approach for fair comparison of the values of alternative projects and for the initial design and planning of the open pit.

Paediatric minor oral surgical procedures under inhalation sedation and general anaesthetic: a comparison of variety and duration of treatment.

PubMed

Foley, J

2008-03-01

To develop baseline data in relation to paediatric minor oral surgical procedures undertaken with both general anaesthesia and nitrous oxide inhalation sedation within a Hospital Dental Service. Data were collected prospectively over a three-year period from May 2003 to June 2006 for patients attending the Departments of Paediatric Dentistry, Dundee Dental Hospital and Ninewells Hospital, NHS Tayside, Great Britain, for all surgical procedures undertaken with either inhalation sedation or general anaesthetic. Both operator status and the procedure being undertaken were noted. In addition, the operating time was recorded. Data for 166 patients (F: 102; M: 64) with a median age of 12.50 (inter-quartile range 10.00, 14.20) years showed that 195 surgical procedures were undertaken. Of these 160 and 35 were with general anaesthetic and sedation respectively. The surgical removal of impacted, carious and supernumerary unit(s) accounted for 53.8% of all procedures, whilst the exposure of impacted teeth and soft tissue surgery represented 34.9% and 11.3% of procedures respectively. The median surgical time for techniques undertaken with sedation was 30.00 (inter-quartile range 25.00, 43.50) minutes whilst that for general anaesthetic was similar at 30.00 (inter-quartile range 15.25, 40.00) minutes (not statistically significant, (Mann Whitney U, W = 3081.5, P = 0.331). The majority of paediatric minor oral surgical procedures entail surgical exposure or removal of impacted teeth. The median treatment time for most procedures undertaken with either general anaesthetic or nitrous oxide sedation was 30 minutes.

26 CFR 48.6420-1 - Credits or payments to ultimate purchaser of gasoline used on a farm.

Code of Federal Regulations, 2011 CFR

2011-04-01

... gasoline used on a farm. 48.6420-1 Section 48.6420-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT... § 48.6420-1 Credits or payments to ultimate purchaser of gasoline used on a farm. (a) In general. If gasoline is used on a farm for farming purposes after June 30, 1965, a credit (under the circumstances...

26 CFR 48.6420-1 - Credits or payments to ultimate purchaser of gasoline used on a farm.

Code of Federal Regulations, 2010 CFR

2010-04-01

... gasoline used on a farm. 48.6420-1 Section 48.6420-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT... § 48.6420-1 Credits or payments to ultimate purchaser of gasoline used on a farm. (a) In general. If gasoline is used on a farm for farming purposes after June 30, 1965, a credit (under the circumstances...

26 CFR 48.6420-1 - Credits or payments to ultimate purchaser of gasoline used on a farm.

Code of Federal Regulations, 2012 CFR

2012-04-01

... gasoline used on a farm. 48.6420-1 Section 48.6420-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT... § 48.6420-1 Credits or payments to ultimate purchaser of gasoline used on a farm. (a) In general. If gasoline is used on a farm for farming purposes after June 30, 1965, a credit (under the circumstances...

26 CFR 48.6420-1 - Credits or payments to ultimate purchaser of gasoline used on a farm.

Code of Federal Regulations, 2013 CFR

2013-04-01

... gasoline used on a farm. 48.6420-1 Section 48.6420-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT... § 48.6420-1 Credits or payments to ultimate purchaser of gasoline used on a farm. (a) In general. If gasoline is used on a farm for farming purposes after June 30, 1965, a credit (under the circumstances...

Urethral bulking agents versus other surgical procedures for the treatment of female stress urinary incontinence: a systematic review and meta-analysis.

PubMed

Leone Roberti Maggiore, Umberto; Bogani, Giorgio; Meschia, Michele; Sorice, Paola; Braga, Andrea; Salvatore, Stefano; Ghezzi, Fabio; Serati, Maurizio

2015-06-01

Bulking agents provide an alternative option in the management of women with stress urinary incontinence and they seem to have an important role in the management flow chart of SUI. However, evidence on this issue is scanty. The most important aspect is to understand whether bulking agents are comparable with the other first-line anti-incontinence surgical procedure (MUS, Burch colposuspension and pubovaginal slings). Hence, the primary aim of the current review was to assess the objective and subjective outcomes of bulking agents in comparison with the other surgical procedures for the treatment of SUI. PubMed and Medline were systematically searched and we included studies evaluating the use of bulking agents in comparison with other surgical approaches for either primary or recurrent treatment of female SUI. Three studies meeting the inclusion criteria were identified. Two of these studies were RCTs evaluating the use of bulking agents versus other surgical procedures for the treatment of primary female SUI; the remnant article was a retrospective cohort study that compared the effectiveness and safety of repeat midurethral sling with urethral bulking after failed midurethral sling. The combined results of all analyses showed that the objective recurrence rate of peri- or trans-urethral injections is significantly higher in comparison with the other surgical procedures. Similar findings were observed when considering separately the treatment for primary or recurrent SUI. Furthermore, lower subjective recurrence rate was observed among patients undergoing other surgical treatment in comparison with those undergoing bulking agents; however, this trend was not statistically significant. Moreover, patients undergoing injection of bulking agents experienced a lower rate of voiding dysfunctions in comparison to the control group. According to current evidence, bulking agents should not be proposed as first-line treatment in those women seeking permanent cure for both

Absorption spectroscopy at the ultimate quantum limit from single-photon states

NASA Astrophysics Data System (ADS)

Whittaker, R.; Erven, C.; Neville, A.; Berry, M.; O'Brien, J. L.; Cable, H.; Matthews, J. C. F.

2017-02-01

Absorption spectroscopy is routinely used to characterise chemical and biological samples. For the state-of-the-art in laser absorption spectroscopy, precision is theoretically limited by shot-noise due to the fundamental Poisson-distribution of photon number in laser radiation. In practice, the shot-noise limit can only be achieved when all other sources of noise are eliminated. Here, we use wavelength-correlated and tuneable photon pairs to demonstrate how absorption spectroscopy can be performed with precision beyond the shot-noise limit and near the ultimate quantum limit by using the optimal probe for absorption measurement—single photons. We present a practically realisable scheme, which we characterise both the precision and accuracy of by measuring the response of a control feature. We demonstrate that the technique can successfully probe liquid samples and using two spectrally similar types of haemoglobin we show that obtaining a given precision in resolution requires fewer heralded single probe photons compared to using an idealised laser.

KEY COMPARISON: Final report on CCQM-K69 key comparison: Testosterone glucuronide in human urine

NASA Astrophysics Data System (ADS)

Liu, Fong-Ha; Mackay, Lindsey; Murby, John

2010-01-01

The CCQM-K69 key comparison of testosterone glucuronide in human urine was organized under the auspices of the CCQM Organic Analysis Working Group (OAWG). The National Measurement Institute Australia (NMIA) acted as the coordinating laboratory for the comparison. The samples distributed for the key comparison were prepared at NMIA with funding from the World Anti-Doping Agency (WADA). WADA granted the approval for this material to be used for the intercomparison provided the distribution and handling of the material were strictly controlled. Three national metrology institutes (NMIs)/designated institutes (DIs) developed reference methods and submitted data for the key comparison along with two other laboratories who participated in the parallel pilot study. A good selection of analytical methods and sample workup procedures was displayed in the results submitted considering the complexities of the matrix involved. The comparability of measurement results was successfully demonstrated by the participating NMIs. Only the key comparison data were used to estimate the key comparison reference value (KCRV), using the arithmetic mean approach. The reported expanded uncertainties for results ranged from 3.7% to 6.7% at the 95% level of confidence and all results agreed within the expanded uncertainty of the KCRV. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

NaI(Tl) scintillator detectors stripping procedure for air kerma measurements of diagnostic X-ray beams

NASA Astrophysics Data System (ADS)

Oliveira, L. S. R.; Conti, C. C.; Amorim, A. S.; Balthar, M. C. V.

2013-03-01

Air kerma is an essential quantity for the calibration of national standards used in diagnostic radiology and the measurement of operating parameters used in radiation protection. Its measurement within the appropriate limits of accuracy, uncertainty and reproducibility is important for the characterization and control of the radiation field for the dosimetry of the patients submitted to diagnostic radiology and, also, for the assessment of the system which produces radiological images. Only the incident beam must be considered for the calculation of the air kerma. Therefore, for energy spectrum, counts apart the total energy deposition in the detector must be subtracted. It is necessary to establish a procedure to sort out the different contributions to the original spectrum and remove the counts representing scattered photons in the detector's materials, partial energy deposition due to the interactions in the detector active volume and, also, the escape peaks contributions. The main goal of this work is to present spectrum stripping procedure, using the MCNP Monte Carlo computer code, for NaI(Tl) scintillation detectors to calculate the air kerma due to an X-ray beam usually used in medical radiology. The comparison between the spectrum before stripping procedure against the reference value showed a discrepancy of more than 63%, while the comparison with the same spectrum after the stripping procedure showed a discrepancy of less than 0.2%.

Spatial adaption procedures on unstructured meshes for accurate unsteady aerodynamic flow computation

NASA Technical Reports Server (NTRS)

Rausch, Russ D.; Batina, John T.; Yang, Henry T. Y.

1991-01-01

Spatial adaption procedures for the accurate and efficient solution of steady and unsteady inviscid flow problems are described. The adaption procedures were developed and implemented within a two-dimensional unstructured-grid upwind-type Euler code. These procedures involve mesh enrichment and mesh coarsening to either add points in a high gradient region or the flow or remove points where they are not needed, respectively, to produce solutions of high spatial accuracy at minimal computational costs. A detailed description is given of the enrichment and coarsening procedures and comparisons with alternative results and experimental data are presented to provide an assessment of the accuracy and efficiency of the capability. Steady and unsteady transonic results, obtained using spatial adaption for the NACA 0012 airfoil, are shown to be of high spatial accuracy, primarily in that the shock waves are very sharply captured. The results were obtained with a computational savings of a factor of approximately fifty-three for a steady case and as much as twenty-five for the unsteady cases.

The limited use of the fluency heuristic: Converging evidence across different procedures.

PubMed

Pohl, Rüdiger F; Erdfelder, Edgar; Michalkiewicz, Martha; Castela, Marta; Hilbig, Benjamin E

2016-10-01

In paired comparisons based on which of two objects has the larger criterion value, decision makers could use the subjectively experienced difference in retrieval fluency of the objects as a cue. According to the fluency heuristic (FH) theory, decision makers use fluency-as indexed by recognition speed-as the only cue for pairs of recognized objects, and infer that the object retrieved more speedily has the larger criterion value (ignoring all other cues and information). Model-based analyses, however, have previously revealed that only a small portion of such inferences are indeed based on fluency alone. In the majority of cases, other information enters the decision process. However, due to the specific experimental procedures, the estimates of FH use are potentially biased: Some procedures may have led to an overestimated and others to an underestimated, or even to actually reduced, FH use. In the present article, we discuss and test the impacts of such procedural variations by reanalyzing 21 data sets. The results show noteworthy consistency across the procedural variations revealing low FH use. We discuss potential explanations and implications of this finding.

Spatial adaption procedures on unstructured meshes for accurate unsteady aerodynamic flow computation

NASA Technical Reports Server (NTRS)

Rausch, Russ D.; Yang, Henry T. Y.; Batina, John T.

1991-01-01

Spatial adaption procedures for the accurate and efficient solution of steady and unsteady inviscid flow problems are described. The adaption procedures were developed and implemented within a two-dimensional unstructured-grid upwind-type Euler code. These procedures involve mesh enrichment and mesh coarsening to either add points in high gradient regions of the flow or remove points where they are not needed, respectively, to produce solutions of high spatial accuracy at minimal computational cost. The paper gives a detailed description of the enrichment and coarsening procedures and presents comparisons with alternative results and experimental data to provide an assessment of the accuracy and efficiency of the capability. Steady and unsteady transonic results, obtained using spatial adaption for the NACA 0012 airfoil, are shown to be of high spatial accuracy, primarily in that the shock waves are very sharply captured. The results were obtained with a computational savings of a factor of approximately fifty-three for a steady case and as much as twenty-five for the unsteady cases.

Validation of the Simbionix PROcedure Rehearsal Studio sizing module: A comparison of software for endovascular aneurysm repair sizing and planning.

PubMed

Velu, Juliëtte F; Groot Jebbink, Erik; de Vries, Jean-Paul P M; Slump, Cornelis H; Geelkerken, Robert H

2017-02-01

An important determinant of successful endovascular aortic aneurysm repair is proper sizing of the dimensions of the aortic-iliac vessels. The goal of the present study was to determine the concurrent validity, a method for comparison of test scores, for EVAR sizing and planning of the recently introduced Simbionix PROcedure Rehearsal Studio (PRORS). Seven vascular specialists analyzed anonymized computed tomography angiography scans of 70 patients with an infrarenal aneurysm of the abdominal aorta, using three different sizing software packages Simbionix PRORS (Simbionix USA Corp., Cleveland, OH, USA), 3mensio (Pie Medical Imaging BV, Maastricht, The Netherlands), and TeraRecon (Aquarius, Foster City, CA, USA). The following measurements were included in the protocol: diameter 1 mm below the most distal main renal artery, diameter 15 mm below the lowest renal artery, maximum aneurysm diameter, and length from the most distal renal artery to the left iliac artery bifurcation. Averaged over the locations, the intraclass correlation coefficient is 0.83 for Simbionix versus 3mensio, 0.81 for Simbionix versus TeraRecon, and 0.86 for 3mensio versus TeraRecon. It can be concluded that the Simbionix sizing software is as precise as two other validated and commercially available software packages.

Estimating multilevel logistic regression models when the number of clusters is low: a comparison of different statistical software procedures.

PubMed

Austin, Peter C

2010-04-22

Multilevel logistic regression models are increasingly being used to analyze clustered data in medical, public health, epidemiological, and educational research. Procedures for estimating the parameters of such models are available in many statistical software packages. There is currently little evidence on the minimum number of clusters necessary to reliably fit multilevel regression models. We conducted a Monte Carlo study to compare the performance of different statistical software procedures for estimating multilevel logistic regression models when the number of clusters was low. We examined procedures available in BUGS, HLM, R, SAS, and Stata. We found that there were qualitative differences in the performance of different software procedures for estimating multilevel logistic models when the number of clusters was low. Among the likelihood-based procedures, estimation methods based on adaptive Gauss-Hermite approximations to the likelihood (glmer in R and xtlogit in Stata) or adaptive Gaussian quadrature (Proc NLMIXED in SAS) tended to have superior performance for estimating variance components when the number of clusters was small, compared to software procedures based on penalized quasi-likelihood. However, only Bayesian estimation with BUGS allowed for accurate estimation of variance components when there were fewer than 10 clusters. For all statistical software procedures, estimation of variance components tended to be poor when there were only five subjects per cluster, regardless of the number of clusters.

Bilabiate Flowers: The Ultimate Response to Bees?

PubMed Central

Westerkamp, Christian; Claßen-Bockhoff, Regine

2007-01-01

pressure towards the bilabiate syndrome. As bees are very inventive, however, bilabiate constructions will not represent the ultimate response to bees. PMID:17652341

A comparison of Google Glass and traditional video vantage points for bedside procedural skill assessment.

PubMed

Evans, Heather L; O'Shea, Dylan J; Morris, Amy E; Keys, Kari A; Wright, Andrew S; Schaad, Douglas C; Ilgen, Jonathan S

2016-02-01

This pilot study assessed the feasibility of using first person (1P) video recording with Google Glass (GG) to assess procedural skills, as compared with traditional third person (3P) video. We hypothesized that raters reviewing 1P videos would visualize more procedural steps with greater inter-rater reliability than 3P rating vantages. Seven subjects performed simulated internal jugular catheter insertions. Procedures were recorded by both Google Glass and an observer's head-mounted camera. Videos were assessed by 3 expert raters using a task-specific checklist (CL) and both an additive- and summative-global rating scale (GRS). Mean scores were compared by t-tests. Inter-rater reliabilities were calculated using intraclass correlation coefficients. The 1P vantage was associated with a significantly higher mean CL score than the 3P vantage (7.9 vs 6.9, P = .02). Mean GRS scores were not significantly different. Mean inter-rater reliabilities for the CL, additive-GRS, and summative-GRS were similar between vantages. 1P vantage recordings may improve visualization of tasks for behaviorally anchored instruments (eg, CLs), whereas maintaining similar global ratings and inter-rater reliability when compared with conventional 3P vantage recordings. Copyright © 2016 Elsevier Inc. All rights reserved.

Leader-team congruence in power distance values and team effectiveness: the mediating role of procedural justice climate.

PubMed

Cole, Michael S; Carter, Min Z; Zhang, Zhen

2013-11-01

We examine the effect of (in)congruence between leaders' and teams' power distance values on team effectiveness. We hypothesize that the (in)congruence between these values would differentially predict team effectiveness, with procedural justice climate serving as a mediator. Using multisource data and polynomial regression, we found that similarities (and differences) between leaders' and their teams' power distance values can have consequential effects on teams' justice climate and, ultimately, their effectiveness (viz., team performance and team organizational citizenship behavior). We conclude that to fully understand the implications of power distance, one should consider the multiple perspectives of both leaders and team members. (c) 2013 APA, all rights reserved.

Can Whole-Body Cryotherapy with Subsequent Kinesiotherapy Procedures in Closed Type Cryogenic Chamber Improve BASDAI, BASFI, and Some Spine Mobility Parameters and Decrease Pain Intensity in Patients with Ankylosing Spondylitis?

PubMed

Stanek, Agata; Cholewka, Armand; Gadula, Jolanta; Drzazga, Zofia; Sieron, Aleksander; Sieron-Stoltny, Karolina

2015-01-01

The present study investigated whether whole-body cryotherapy (WBC) procedures could potentially have more beneficial effects on index of BASDAI and BASFI, pain intensity, and spine mobility parameters: Ott test, modified Schober test, chest expansion in ankylosing spondylitis (AS) patients, than kinesiotherapy procedures used separately. AS patients were exposed to a cycle of WBC procedures lasting 3 minutes a day, with a subsequent 60 minutes of kinesiotherapy or 60 minutes of kinesiotherapy only, for 10 consecutive days excluding weekend. After the completion of the cycle of WBC procedures with subsequent kinesiotherapy in the AS patients, BASDAI index decreased about 40% in comparison with the input value, whereas in the group of patients who received only kinesiotherapy it decreased only about 15% in comparison with the input value. After the completion of the treatment in the WBC group, BASFI index decreased about 30% in comparison with the input value, whereas in the kinesiotherapy group it only decreased about 16% in comparison with the input value. The important conclusion was that, in WBC group with subsequent kinesiotherapy, we observed on average about twice better results than in the group treated only by kinesiotherapy.

Can Whole-Body Cryotherapy with Subsequent Kinesiotherapy Procedures in Closed Type Cryogenic Chamber Improve BASDAI, BASFI, and Some Spine Mobility Parameters and Decrease Pain Intensity in Patients with Ankylosing Spondylitis?

PubMed Central

Stanek, Agata; Cholewka, Armand; Gadula, Jolanta; Drzazga, Zofia; Sieron, Aleksander; Sieron-Stoltny, Karolina

2015-01-01

The present study investigated whether whole-body cryotherapy (WBC) procedures could potentially have more beneficial effects on index of BASDAI and BASFI, pain intensity, and spine mobility parameters: Ott test, modified Schober test, chest expansion in ankylosing spondylitis (AS) patients, than kinesiotherapy procedures used separately. AS patients were exposed to a cycle of WBC procedures lasting 3 minutes a day, with a subsequent 60 minutes of kinesiotherapy or 60 minutes of kinesiotherapy only, for 10 consecutive days excluding weekend. After the completion of the cycle of WBC procedures with subsequent kinesiotherapy in the AS patients, BASDAI index decreased about 40% in comparison with the input value, whereas in the group of patients who received only kinesiotherapy it decreased only about 15% in comparison with the input value. After the completion of the treatment in the WBC group, BASFI index decreased about 30% in comparison with the input value, whereas in the kinesiotherapy group it only decreased about 16% in comparison with the input value. The important conclusion was that, in WBC group with subsequent kinesiotherapy, we observed on average about twice better results than in the group treated only by kinesiotherapy. PMID:26273618

Comparative evaluation of stress levels before, during, and after periodontal surgical procedures with and without nitrous oxide-oxygen inhalation sedation

PubMed Central

Sandhu, Gurkirat; Khinda, Paramjit Kaur; Gill, Amarjit Singh; Singh Khinda, Vineet Inder; Baghi, Kamal; Chahal, Gurparkash Singh

2017-01-01

Context: Periodontal surgical procedures produce varying degree of stress in all patients. Nitrous oxide-oxygen inhalation sedation is very effective for adult patients with mild-to-moderate anxiety due to dental procedures and needle phobia. Aim: The present study was designed to perform periodontal surgical procedures under nitrous oxide-oxygen inhalation sedation and assess whether this technique actually reduces stress physiologically, in comparison to local anesthesia alone (LA) during lengthy periodontal surgical procedures. Settings and Design: This was a randomized, split-mouth, cross-over study. Materials and Methods: A total of 16 patients were selected for this randomized, split-mouth, cross-over study. One surgical session (SS) was performed under local anesthesia aided by nitrous oxide-oxygen inhalation sedation, and the other SS was performed on the contralateral quadrant under LA. For each session, blood samples to measure and evaluate serum cortisol levels were obtained, and vital parameters including blood pressure, heart rate, respiratory rate, and arterial blood oxygen saturation were monitored before, during, and after periodontal surgical procedures. Statistical Analysis Used: Paired t-test and repeated measure ANOVA. Results: The findings of the present study revealed a statistically significant decrease in serum cortisol levels, blood pressure and pulse rate and a statistically significant increase in respiratory rate and arterial blood oxygen saturation during periodontal surgical procedures under nitrous oxide inhalation sedation. Conclusion: Nitrous oxide-oxygen inhalation sedation for periodontal surgical procedures is capable of reducing stress physiologically, in comparison to LA during lengthy periodontal surgical procedures. PMID:29386796

A comparison of automated crater detection methods

NASA Astrophysics Data System (ADS)

Bandeira, L.; Barreira, C.; Pina, P.; Saraiva, J.

2008-09-01

Abstract This work presents early results of a comparison between some common methodologies for automated crater detection. The three procedures considered were applied to images of the surface of Mars, thus illustrating some pros and cons of their use. We aim to establish the clear advantages in using this type of methods in the study of planetary surfaces.

A Fiducial Approach to Extremes and Multiple Comparisons

ERIC Educational Resources Information Center

Wandler, Damian V.

2010-01-01

Generalized fiducial inference is a powerful tool for many difficult problems. Based on an extension of R. A. Fisher's work, we used generalized fiducial inference for two extreme value problems and a multiple comparison procedure. The first extreme value problem is dealing with the generalized Pareto distribution. The generalized Pareto…

Automatic procedure for stable tetragonal or hexagonal structures: application to tetragonal Y and Cd

NASA Astrophysics Data System (ADS)

Marcus, P. M.; Jona, F.

2005-05-01

A simple effective procedure (MNP) for finding equilibrium tetragonal and hexagonal states under pressure is described and applied. The MNP procedure finds a path to minima of the Gibbs free energy G at T=0 K (G=E+pV, E=energy per atom, p=pressure, V=volume per atom) for tetragonal and hexagonal structures by using the approximate expansion of G in linear and quadratic strains at an arbitrary initial structure to find a change in the strains which moves toward a minimum of G. Iteration automatically proceeds to a minimum within preset convergence criteria on the calculation of the minimum. Comparison is made with experimental results for the ground states of seven metallic elements in hexagonal close-packed (hcp), face- and body-centered cubic structures, and with a previous procedure for finding minima based on tracing G along the epitaxial Bain path (EBP) to a minimum; the MNP is more easily generalized than the EBP procedure to lower symmetry and more atoms in the unit cell. Comparison is also made with a molecular-dynamics program for crystal equilibrium structures under pressure and with CRYSTAL, a program for crystal equilibrium structures at zero pressure. Application of MNP to the elements Y and Cd, which have hcp ground states at zero pressure, finds minima of E at face-centered cubic (fcc) structure for both Y and Cd. Evaluation of all the elastic constants shows that fcc Y is stable, hence a metastable phase, but fcc Cd is unstable.

Peri-procedural interrupted oral anticoagulation for atrial fibrillation ablation: comparison of aspirin, warfarin, dabigatran, and rivaroxaban

PubMed Central

Winkle, Roger A.; Mead, R. Hardwin; Engel, Gregory; Kong, Melissa H.; Patrawala, Rob A.

2014-01-01

Aims Atrial fibrillation ablation requires peri-procedural oral anticoagulation (OAC) to prevent thromboembolic events. There are several options for OAC. We evaluate peri-procedural AF ablation complications using a variety of peri-procedural OACs. Methods and results We examined peri-procedural OAC and groin, bleeding, and thromboembolic complications for 2334 consecutive AF ablations using open irrigated-tip radiofrequency (RF) catheters. Pre-ablation OAC was warfarin in 1113 (47.7%), dabigatran 426 (18.3%), rivaroxaban 187 (8.0%), aspirin 472 (20.2%), and none 136 (5.8%). Oral anticoagulation was always interrupted and intraprocedural anticoagulation was unfractionated heparin (activated clotting time, ACT = 237 ± 26 s). Pre- and post-OAC drugs were the same for 1591 (68.2%) and were different for 743 (31.8%). Following ablation, 693 (29.7%) were treated with dabigatran and 291 (12.5%) were treated with rivaroxaban. There were no problems changing from one OAC pre-ablation to another post-ablation. Complications included 12 (0.51%) pericardial tamponades [no differences for dabigatran (P = 0.457) or rivaroxaban (P = 0.163) compared with warfarin], 12 (0.51%) groin complications [no differences for rivaroxaban (P = 0.709) and fewer for dabigatran (P = 0.041) compared with warfarin]. Only 5 of 2334 (0.21%) required blood transfusions. There were two strokes (0.086%) and no transient ischaemic attacks (TIAs) in the first 48 h post-ablation. Three additional strokes (0.13%), and two TIAs (0.086%) occurred from 48 h to 30 days. Only one stroke had a residual deficit. Compared with warfarin, the neurologic event rate was not different for dabigatran (P = 0.684) or rivaroxaban (P = 0.612). Conclusion Using interrupted OAC, low target intraprocedural ACT, and irrigated-tip RF, the rate of peri-procedural groin, haemorrhagic, and thromboembolic complications was extremely low. There were only minimal differences between OACs. Low-risk patients may remain on aspirin

Correcting for Indirect Range Restriction in Meta-Analysis: Testing a New Meta-Analytic Procedure

ERIC Educational Resources Information Center

Le, Huy; Schmidt, Frank L.

2006-01-01

Using computer simulation, the authors assessed the accuracy of J. E. Hunter, F. L. Schmidt, and H. Le's (2006) procedure for correcting for indirect range restriction, the most common type of range restriction, in comparison with the conventional practice of applying the Thorndike Case II correction for direct range restriction. Hunter et…

Analyzing Multivariate Repeated Measures Designs: A Comparison of Two Approximate Degrees of Freedom Procedures

ERIC Educational Resources Information Center

Lix, Lisa M.; Algina, James; Keselman, H. J.

2003-01-01

The approximate degrees of freedom Welch-James (WJ) and Brown-Forsythe (BF) procedures for testing within-subjects effects in multivariate groups by trials repeated measures designs were investigated under departures from covariance homogeneity and normality. Empirical Type I error and power rates were obtained for least-squares estimators and…

A Comparison of Simultaneous Prompting and Constant Time Delay Procedures in Teaching State Capitals

ERIC Educational Resources Information Center

Head, Kenneth David; Collins, Belva C.; Schuster, John W.; Ault, Melinda Jones

2011-01-01

This investigation compared the effectiveness and efficiency of constant time delay (CTD) and simultaneous prompting (SP) procedures in teaching discrete social studies facts to 4 high school students with learning and behavior disorders using an adapted alternating treatments design nested within a multiple probe design. The results indicated…

Test Procedures for Characterizing, Evaluating, and Managing Separator Materials used in Secondary Alkaline Batteries

NASA Technical Reports Server (NTRS)

Guasp, Edwin; Manzo, Michelle A.

1997-01-01

Secondary alkaline batteries, such as nickel-cadmium and silver-zinc, are commonly used for aerospace applications. The uniform evaluation and comparison of separator properties for these systems is dependent upon the measurement techniques. This manual presents a series of standard test procedures that can be used to evaluate, compare, and select separator materials for use in alkaline batteries. Detailed test procedures evaluating the following characteristics are included in this manual: physical measurements of thickness and area weight, dimensional stability measurements, electrolyte retention, resistivity, permeability as measured via bubble pressure, surface evaluation via SEM, chemical stability, and tensile strength.

Long-term outcomes of aortic root operations for Marfan syndrome: A comparison of Bentall versus aortic valve-sparing procedures.

PubMed

Price, Joel; Magruder, J Trent; Young, Allen; Grimm, Joshua C; Patel, Nishant D; Alejo, Diane; Dietz, Harry C; Vricella, Luca A; Cameron, Duke E

2016-02-01

Prophylactic aortic root replacement improves survival in patients with Marfan syndrome with aortic root aneurysms, but the optimal procedure remains undefined. Adult patients with Marfan syndrome who had Bentall or aortic valve-sparing root replacement (VSRR) procedures between 1997 and 2013 were identified. Comprehensive follow-up information was obtained from hospital charts and telephone contact. One hundred sixty-five adult patients with Marfan syndrome (aged > 20 years) had either VSRR (n = 98; 69 reimplantation, 29 remodeling) or Bentall (n = 67) procedures. Patients undergoing Bentall procedure were older (median, 37 vs 36 years; P = .03), had larger median preoperative sinus diameter (5.5 cm vs 5.0 cm; P = .003), more aortic dissections (25.4% vs 4.1%; P < .001), higher incidence of moderate or severe aortic insufficiency (49.3% vs 14.4%; P < .001) and more urgent or emergent operations (24.6% vs 3.3%; P < .001). There were no hospital deaths and 9 late deaths in more than 17 years of follow-up (median, 7.8 deaths). Ten-year survival was 90.5% in patients undergoing Bentall procedure and 96.3% in patients undergoing VSRR (P = .10). Multivariable analysis revealed that VSRR was associated with fewer thromboembolic or hemorrhagic events (hazard ratio, 0.16; 95% confidence interval, 0.03-0.85; P = .03). There was no independent difference in long-term survival, freedom from reoperation, or freedom from endocarditis between the 2 procedures. After prophylactic root replacement in patients with Marfan syndrome, patients undergoing Bentall and valve-sparing procedures have similar late survival, freedom from root reoperation, and freedom from endocarditis. However, valve-sparing procedures result in significantly fewer thromboembolic and hemorrhagic events. Copyright © 2016 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

A comperative study for short-term surgical outcomes of midurethral sling procedures in obese and non-obese women with stress urinary incontinence.

PubMed

Kokanalı, Mahmut Kuntay; Cavkaytar, Sabri; Kokanalı, Demet; Aksakal, Orhan; Doganay, Melike

2016-11-01

There is little data comparing the surgical outcomes of tension-free vaginal tape (TVT) and transobturator tape (TOT) procedures in obese women. Therefore, we aimed to compare the surgical outcomes of TOT and TVT procedures among obese women with a diagnosis of stress urinary incontinence (SUI). One hundred and eighty-nine women who underwent TVT or TOT procedures due to pure SUI were included. Women in whom the body mass index (BMI) was ≥30 kg/m 2 were considered as obese, while <30 kg/m 2 were non-obese. And women with BMI ≥35 kg/m 2 was defined as morbidly obese. At sixth month postoperative follow-up, neither the comparison of TVT and TOT results in obese women nor the comparison of TVT or TOT results between obese and non-obese women showed any significant differences in terms of objective and subjective cure rates, quality of life improvements, or intra/postoperative complications. TVT and TOT procedures also have similar effectiveness among morbidly obese women. We have concluded that TVT and TOT operations seem to be equally effective and safe surgical treatment procedures for female SUI regardless of BMI.

Model Comparison of Nonlinear Structural Equation Models with Fixed Covariates.

ERIC Educational Resources Information Center

Lee, Sik-Yum; Song, Xin-Yuan

2003-01-01

Proposed a new nonlinear structural equation model with fixed covariates to deal with some complicated substantive theory and developed a Bayesian path sampling procedure for model comparison. Illustrated the approach with an illustrative example using data from an international study. (SLD)

Asymptotically optimum multialternative sequential procedures for discernment of processes minimizing average length of observations

NASA Astrophysics Data System (ADS)

Fishman, M. M.

1985-01-01

The problem of multialternative sequential discernment of processes is formulated in terms of conditionally optimum procedures minimizing the average length of observations, without any probabilistic assumptions about any one occurring process, rather than in terms of Bayes procedures minimizing the average risk. The problem is to find the procedure that will transform inequalities into equalities. The problem is formulated for various models of signal observation and data processing: (1) discernment of signals from background interference by a multichannel system; (2) discernment of pulse sequences with unknown time delay; (3) discernment of harmonic signals with unknown frequency. An asymptotically optimum sequential procedure is constructed which compares the statistics of the likelihood ratio with the mean-weighted likelihood ratio and estimates the upper bound for conditional average lengths of observations. This procedure is shown to remain valid as the upper bound for the probability of erroneous partial solutions decreases approaching zero and the number of hypotheses increases approaching infinity. It also remains valid under certain special constraints on the probability such as a threshold. A comparison with a fixed-length procedure reveals that this sequential procedure decreases the length of observations to one quarter, on the average, when the probability of erroneous partial solutions is low.

Comparison of methods for hydrocarbon analysis of marine biota

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gritz, R.L.; Shaw, D.G.

1977-04-01

A comparison was made of several procedures for the isolation of hydrocarbons from other matter and for the fractionation of hydrocarbons according to chemical type. The efficiency of Soxhlet extraction followed by saponification with extraction by alkaline digestion (direct saponification) was compared using two hour and 24 hour reaction times. All procedures were performed on approximately 60 g of soft parts of Saxidomus gigantea (butter clam). The 24 hour saponification and column chromatography on partially deactivated columns constituted the best procedure tested. Soxhlet extraction followed by two hour saponification did not completely remove methyl esters and was the most laboriousmore » technique. Direct two hour saponification was also questionable in the removal of esters and led to severe emulsion problems. The recoveries of hydrocarbons by the three procedures was substantially the same.« less

26 CFR 48.6421-1 - Credits or payments to ultimate purchaser of gasoline used for certain nonhighway purposes.

Code of Federal Regulations, 2013 CFR

2013-04-01

... gasoline used for certain nonhighway purposes. 48.6421-1 Section 48.6421-1 Internal Revenue INTERNAL... Manufacturers Taxes § 48.6421-1 Credits or payments to ultimate purchaser of gasoline used for certain nonhighway purposes. (a) In general. (1) If gasoline is used in a qualified business use or as fuel in an...

26 CFR 48.6421-1 - Credits or payments to ultimate purchaser of gasoline used for certain nonhighway purposes.

Code of Federal Regulations, 2010 CFR

2010-04-01

... gasoline used for certain nonhighway purposes. 48.6421-1 Section 48.6421-1 Internal Revenue INTERNAL... Manufacturers Taxes § 48.6421-1 Credits or payments to ultimate purchaser of gasoline used for certain nonhighway purposes. (a) In general. (1) If gasoline is used in a qualified business use or as fuel in an...

26 CFR 48.6421-1 - Credits or payments to ultimate purchaser of gasoline used for certain nonhighway purposes.

Code of Federal Regulations, 2011 CFR

2011-04-01

... gasoline used for certain nonhighway purposes. 48.6421-1 Section 48.6421-1 Internal Revenue INTERNAL... Manufacturers Taxes § 48.6421-1 Credits or payments to ultimate purchaser of gasoline used for certain nonhighway purposes. (a) In general. (1) If gasoline is used in a qualified business use or as fuel in an...

26 CFR 48.6421-1 - Credits or payments to ultimate purchaser of gasoline used for certain nonhighway purposes.

Code of Federal Regulations, 2012 CFR

2012-04-01

... gasoline used for certain nonhighway purposes. 48.6421-1 Section 48.6421-1 Internal Revenue INTERNAL... Manufacturers Taxes § 48.6421-1 Credits or payments to ultimate purchaser of gasoline used for certain nonhighway purposes. (a) In general. (1) If gasoline is used in a qualified business use or as fuel in an...

Queerspawn Speak out: A Review of "Let's Get This Straight: The Ultimate Handbook for Youth with LGBTQ Parents"

ERIC Educational Resources Information Center

Ryan, Caitlin L.

2012-01-01

"Let's Get This Straight: The Ultimate Handbook for Youth With LGBTQ Parents" provides an engaging and accessible set of tools for youth from LGBTQ-headed families. The stories and resources shared encourage these youth to take pride in their families, value their diverse experiences, and work against homophobia, transphobia, and other forms of…

Development and applications of two computational procedures for determining the vibration modes of structural systems. [aircraft structures - aerospaceplanes

NASA Technical Reports Server (NTRS)

Kvaternik, R. G.

1975-01-01

Two computational procedures for analyzing complex structural systems for their natural modes and frequencies of vibration are presented. Both procedures are based on a substructures methodology and both employ the finite-element stiffness method to model the constituent substructures. The first procedure is a direct method based on solving the eigenvalue problem associated with a finite-element representation of the complete structure. The second procedure is a component-mode synthesis scheme in which the vibration modes of the complete structure are synthesized from modes of substructures into which the structure is divided. The analytical basis of the methods contains a combination of features which enhance the generality of the procedures. The computational procedures exhibit a unique utilitarian character with respect to the versatility, computational convenience, and ease of computer implementation. The computational procedures were implemented in two special-purpose computer programs. The results of the application of these programs to several structural configurations are shown and comparisons are made with experiment.

Stapledon's Interplanetary Man: A Commonwealth of Worlds and the Ultimate Purpose of Space Colonisation

NASA Astrophysics Data System (ADS)

Crawford, Ian A.

In his 1948 lecture to the British Interplanetary Society Stapledon considered the ultimate purpose of colonising other worlds. Having examined the possible motivations arising from improved scientific knowledge and access to extraterrestrial raw materials, he concludes that the ultimate benefits of space colonisation will be the increased opportunities for developing human (and post-human) diversity, intellectual and aesthetic potential and, especially, `spirituality'. By the latter concept he meant a striving for ``sensitive and intelligent awareness of things in the universe (including persons), and of the universe as a whole.'' A key insight articulated by Stapledon in this lecture was that this should be the aspiration of all human development anyway, with or without space colonisation, but that the latter would greatly increase the scope for such developments. Another key aspect of his vision was the development of a diverse, but connected, `Commonwealth of Worlds' extending throughout the Solar System, and eventually beyond, within which human potential would be maximised. In this paper I analyse Stapledon's vision of space colonisation, and will conclude that his overall conclusions remain sound. However, I will also argue that he was overly utopian in believing that human social and political unity are prerequisites for space exploration (while agreeing that they are desirable objectives in their own right), and that he unnecessarily downplayed the more prosaic scientific and economic motivations which are likely to be key drivers for space exploration (if not colonisation) in the shorter term. Finally, I draw attention to some recent developments in international space policy which, although probably not influenced by Stapledon's work, are nevertheless congruent with his overarching philosophy as outlined in `Interplanetary Man?'.

Latent Class Detection and Class Assignment: A Comparison of the MAXEIG Taxometric Procedure and Factor Mixture Modeling Approaches

ERIC Educational Resources Information Center

Lubke, Gitta; Tueller, Stephen

2010-01-01

Taxometric procedures such as MAXEIG and factor mixture modeling (FMM) are used in latent class clustering, but they have very different sets of strengths and weaknesses. Taxometric procedures, popular in psychiatric and psychopathology applications, do not rely on distributional assumptions. Their sole purpose is to detect the presence of latent…

Medical student selection criteria and socio-demographic factors as predictors of ultimately working rurally after graduation.

PubMed

Puddey, Ian B; Mercer, Annette; Playford, Denese E; Riley, Geoffrey J

2015-04-14

We have previously demonstrated that both coming from a rural background and spending a year-long clinical rotation in our Rural Clinical School (RCS) have independent and additive effects to increase the likelihood of medical students practicing rurally following graduation. The current study assesses the extent to which medical school selection criteria and/or the socio-demographic profile of medical students may further facilitate or hamper the selection of students ultimately destined for the rural medical workforce. The study comprised 729 students, admitted from secondary school since 1999 and having graduated by 2011, whose actual workplace location in 2014 was classified as either urban or rural using the Australian Health Practitioner Regulation Agency database. Selection factors on entry (score from a standardised interview, percentile scores for the 3 components of the Undergraduate Medicine and Health Sciences Admission Test (UMAT) and prior academic performance as assessed by the Australian Tertiary Admissions Rank) together with socio-demographic factors (age, gender, decile for the Index of Relative Socioeconomic Advantage and Disadvantage (IRSAD)), were examined in relation to ultimate rural destination of practice. In logistic regression, those practicing in a rural location in 2014 were more likely to have come from the lower 6 IRSAD deciles (OR 2.75, 95% CI 1.44, 5.23, P = 0.002), to be older (OR 1.86, 95% CI 1.09, 3.18, p = 0.023) and to have a lower UMAT-3 (Non-verbal communication) score (OR 0.98, 95% CI 0.97, 0.99, P = 0.005). After further controlling for either rural background or RCS participation, only age and UMAT-3 remained as independent predictors of current rural practice. In terms of the socio-demographic profiles of those selected for medical school entry from secondary school, only older age weakly augmented the selection of graduates likely to ultimately work in a rural destination. Among the selection factors, having achieved

26 CFR 48.6427-9 - Diesel fuel and kerosene; claims by registered ultimate vendors (farming and State use).

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 16 2012-04-01 2012-04-01 false Diesel fuel and kerosene; claims by registered... Manufacturers Taxes § 48.6427-9 Diesel fuel and kerosene; claims by registered ultimate vendors (farming and... taxed diesel fuel and kerosene may claim the income tax credits or payments allowed by section 6427(l)(5...

26 CFR 48.6427-9 - Diesel fuel and kerosene; claims by registered ultimate vendors (farming and State use).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Diesel fuel and kerosene; claims by registered... Manufacturers Taxes § 48.6427-9 Diesel fuel and kerosene; claims by registered ultimate vendors (farming and... taxed diesel fuel and kerosene may claim the income tax credits or payments allowed by section 6427(l)(5...

26 CFR 48.6427-9 - Diesel fuel and kerosene; claims by registered ultimate vendors (farming and State use).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 16 2013-04-01 2013-04-01 false Diesel fuel and kerosene; claims by registered... Manufacturers Taxes § 48.6427-9 Diesel fuel and kerosene; claims by registered ultimate vendors (farming and... taxed diesel fuel and kerosene may claim the income tax credits or payments allowed by section 6427(l)(5...

26 CFR 48.6427-9 - Diesel fuel and kerosene; claims by registered ultimate vendors (farming and State use).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Diesel fuel and kerosene; claims by registered... Manufacturers Taxes § 48.6427-9 Diesel fuel and kerosene; claims by registered ultimate vendors (farming and... taxed diesel fuel and kerosene may claim the income tax credits or payments allowed by section 6427(l)(5...

Ultimate high power operation of 9xx-nm single emitter broad stripe laser diodes

NASA Astrophysics Data System (ADS)

Kaifuchi, Yoshikazu; Yamagata, Yuji; Nogawa, Ryozaburo; Morohashi, Rintaro; Yamada, Yumi; Yamaguchi, Masayuki

2017-02-01

Design optimization of single emitter broad stripe 9xx-nm laser diodes was studied to achieve ultimate high power and high efficiency operation for a use in fiber laser pumping and other industrial applications. We tuned laser vertical layer design and stripe width in terms of optical confinement as well as electrical resistance. As a result, newly designed LDs with 4mm-long cavity and 220 μm-wide stripe successfully demonstrate maximum CW output power as high as 33 W and high efficiency operation of more than 60 % PCE even at 27 W output power. In pulse measurement, the maximum output of 68 W was obtained.

Effects of aging procedures on the molecular, biochemical, morphological, and mechanical properties of vacuum-formed retainers.

PubMed

Ahn, Hyo-Won; Ha, Hye-Ryun; Lim, Ho-Nam; Choi, Samjin

2015-11-01

The influence of intraoral exposure procedures on the physical characteristics of thermoplastic vacuum-formed retainers (VFRs) is still unclear. The effects of thermoforming and intraoral use on the molecular, chemical, morphological, and mechanical properties of thermoplastic VFRs were investigated. VFRs with a 0.8-mm-thick thermoplastic PETG sheet acquired from 48 patients were investigated with two aging procedures, including vacuum forming and intraoral exposure, for 2-week and 6-month. Eight evaluating sites for thermoplastic VFRs were assessed with seven analytical techniques. LM, SEM, and AFM microscopic findings showed that the surface characteristics increased with increasing in vivo exposure time (a four-fold increase) and varied depending on the sites evaluated (an occlusal surface). Raman and EDX spectroscopic findings showed that aging procedures led to a significant change in the molecular composition of VFRs, leading to a decrease in the composition rate of carbon (C) and the presence of silicon (Si), phosphorus (P), and calcium (Ca). Compressive strength and tensile tests showed that aging procedures led to a significant increase (P<0.01) in ultimate tensile strength, elastic modulus, the stored energy at a 6-mm deflection (u6 mm), and the compressed load at a 3-mm deflection (σ3 mm). Thermoforming led to a smoother surface and no crystallization of PETG sheets. Intraoral exposure accelerated changes in surface morphology, tensile strength, and elastic modulus of VFRs. This change was site-specific and enhanced with an increase in intraoral exposure time. Therefore, thermoforming and in vivo oral exposure procedures led to the molecular, morphological, and mechanical properties of thermoplastic VFRs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Otto LaPorte Lecture: Ultimate Rayleigh-Bénard and Taylor-Couette turbulence

NASA Astrophysics Data System (ADS)

Lohse, Detlef

2017-11-01

Rayleigh-Bénard flow - the flow in a box heated from below and cooled from above - and Taylor-Couette flow - the flow between two coaxial co- or counter-rotating cylinders - are the two paradigmatic systems in physics of fluids and many new concepts have been tested with them. They are mathematically well defined, namely by the Navier-Stokes equations and the respective boundary conditions, and share many features. While the low Reynolds number regime (i.e., weakly driven systems) has been very well explored in the '80s and '90s of the last century, in the fully turbulent regime major research activity only developed in the last two decades. In this talk we will first briefly review this recent progress in our understanding of fully developed Rayleigh-Bénard (RB) and Taylor-Couette (TC) turbulence, from the experimental, theoretical, and numerical point of view. We will explain the parameter dependences of the global transport properties of the flow and the local flow organisation, including velocity profiles and boundary layers, which are closely connected to the global properties. Next, we will discuss transitions between different (turbulent) flow states. We will in particular focus on the so-called ultimate regime, in which the boundary layer has become turbulent, and which therefore has enhanced transport properties. In the mechanical driven TC flow this ultimate regime can also be achieved in our high-performance numerical simulations, showing excellent agreement with our experiments on the Twente Turbulent Taylor-Couette (T3 C) facility. In the last part of the talk we will discuss RB and TC turbulence with rough walls. There the results can be expressed in terms of the skin-friction factor, revealing analogy to turbulent flow in rough pipes. Finally, we will present our results on RB and TC flow with bubbles, focusing on bubbly drag reduction and its origin. This is joint work with many colleagues over the years, and I in particular would like to name

Efficacy of a Procedure-Specific Education Module on Informed Consent in Plastic Surgery.

PubMed

Brandel, Michael G; Reid, Christopher M; Parmeshwar, Nisha; Dobke, Marek K; Gosman, Amanda A

2017-05-01

Truly informed consent is an elusive goal, seldom attained in medical or surgical practice. Patients often do not fully understand procedures and therapies they undergo or the associated sequelae. Historically, informed consent and patient education have been limited to physician discussions, sometimes with the addition of simple visual aids. More recently, there is a growing body of decision aids available, including interactive multimedia patient educational modules that review preoperative through postoperative care, risks, benefits, alternatives, different surgical options, as well as commonly asked questions. We hypothesized that the addition of a Web-based educational tool would positively impact attainment of informed consent and satisfaction in plastic surgery patients. We performed a prospective randomized controlled study comparing patients who presented in consultation for breast reconstruction, breast reduction, and abdominoplasty. Patients received standard patient education along with a procedure-specific (study) or general patient safety (control) Web-based educational module. Informed consent was measured using a surgical-focused, modified version of the Shared Decision-making 25 index tool. Patient demographic information as well as surrogate markers of familiarity with technology were recorded preoperatively and postoperatively. Comparisons were made between study and control groups, procedure subgroups, and preoperative and postoperative time points. Demographic factors and consent variables were compared among experimental and procedure groups. Data were collected from 65 patients preoperatively and 48 patients postoperatively. Thirty patients competed both surveys. Overall, no differences in patient characteristics or familiarity with technology were observed between experimental groups. Demographic characteristics were also similar between groups. No meaningful differences were identified in comparisons between experimental groups on either

On the equivalence of generalized least-squares approaches to the evaluation of measurement comparisons

NASA Astrophysics Data System (ADS)

Koo, A.; Clare, J. F.

2012-06-01

Analysis of CIPM international comparisons is increasingly being carried out using a model-based approach that leads naturally to a generalized least-squares (GLS) solution. While this method offers the advantages of being easier to audit and having general applicability to any form of comparison protocol, there is a lack of consensus over aspects of its implementation. Two significant results are presented that show the equivalence of three differing approaches discussed by or applied in comparisons run by Consultative Committees of the CIPM. Both results depend on a mathematical condition equivalent to the requirement that any two artefacts in the comparison are linked through a sequence of measurements of overlapping pairs of artefacts. The first result is that a GLS estimator excluding all sources of error common to all measurements of a participant is equal to the GLS estimator incorporating all sources of error, including those associated with any bias in the standards or procedures of the measuring laboratory. The second result identifies the component of uncertainty in the estimate of bias that arises from possible systematic effects in the participants' measurement standards and procedures. The expression so obtained is a generalization of an expression previously published for a one-artefact comparison with no inter-participant correlations, to one for a comparison comprising any number of repeat measurements of multiple artefacts and allowing for inter-laboratory correlations.

A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates

NASA Astrophysics Data System (ADS)

Chen, Bai-Qiao; Guedes Soares, C.

2018-03-01

The present work investigates the compressive axial ultimate strength of fillet-welded steel-plated ship structures subjected to uniaxial compression, in which the residual stresses in the welded plates are calculated by a thermo-elasto-plastic finite element analysis that is used to fit an idealized model of residual stress distribution. The numerical results of ultimate strength based on the simplified model of residual stress show good agreement with those of various methods including the International Association of Classification Societies (IACS) Common Structural Rules (CSR), leading to the conclusion that the simplified model can be effectively used to represent the distribution of residual stresses in steel-plated structures in a wide range of engineering applications. It is concluded that the widths of the tension zones in the welded plates have a quasi-linear behavior with respect to the plate slenderness. The effect of residual stress on the axial strength of the stiffened plate is analyzed and discussed.

Regions of attraction and ultimate boundedness for linear quadratic regulators with nonlinearities

NASA Technical Reports Server (NTRS)

Joshi, S. M.

1984-01-01

The closed-loop stability of multivariable linear time-invariant systems controlled by optimal linear quadratic (LQ) regulators is investigated for the case when the feedback loops have nonlinearities N(sigma) that violate the standard stability condition, sigma N(sigma) or = 0.5 sigma(2). The violations of the condition are assumed to occur either (1) for values of sigma away from the origin (sigma = 0) or (2) for values of sigma in a neighborhood of the origin. It is proved that there exists a region of attraction for case (1) and a region of ultimate boundedness for case (2), and estimates are obtained for these regions. The results provide methods for selecting the performance function parameters to design LQ regulators with better tolerance to nonlinearities. The results are demonstrated by application to the problem of attitude and vibration control of a large, flexible space antenna in the presence of actuator nonlinearities.

An Ultimate Stereocontrol in Asymmetric Synthesis of Optically Pure Fully Aromatic Helicenes.

PubMed

Šámal, Michal; Chercheja, Serghei; Rybáček, Jiří; Vacek Chocholoušová, Jana; Vacek, Jaroslav; Bednárová, Lucie; Šaman, David; Stará, Irena G; Starý, Ivo

2015-07-08

The role of the helicity of small molecules in enantioselective catalysis, molecular recognition, self-assembly, material science, biology, and nanoscience is much less understood than that of point-, axial-, or planar-chiral molecules. To uncover the envisaged potential of helically chiral polyaromatics represented by iconic helicenes, their availability in an optically pure form through asymmetric synthesis is urgently needed. We provide a solution to this problem present since the birth of helicene chemistry in 1956 by developing a general synthetic methodology for the preparation of uniformly enantiopure fully aromatic [5]-, [6]-, and [7]helicenes and their functionalized derivatives. [2 + 2 + 2] Cycloisomerization of chiral triynes combined with asymmetric transformation of the first kind (ultimately controlled by the 1,3-allylic-type strain) is central to this endeavor. The point-to-helical chirality transfer utilizing a traceless chiral auxiliary features a remarkable resistance to diverse structural perturbations.

Comparison of Everyday and Every-Fourth-Day Probe Sessions with the Simultaneous Prompting Procedure

ERIC Educational Resources Information Center

Reichow, Brian; Wolery, Mark

2009-01-01

Simultaneous prompting is a response-prompting procedure requiring two daily sessions: an instructional session in which a controlling prompt is provided on all trials, and a probe session in which no prompt is provided on any trials. In this study, two schedules of conducting the probe sessions (daily vs. every fourth day) were compared using the…

Teachers' legitimacy: Effects of justice perception and social comparison processes.

PubMed

Gouveia-Pereira, Maria; Vala, Jorge; Correia, Isabel

2017-03-01

Teachers' legitimacy is central to school functioning. Teachers' justice, whether distributive or procedural, predicts teachers' legitimacy. What is still do be found, and constitutes the goal of this paper, is whether unjust treatment by a teacher affects the legitimacy of the teacher differently when the student knows that the teacher was fair to a peer (comparative judgement) or when the student does not have that information (autonomous judgement). A total of 79 high school students participated in Study 1; 75 high school students participated in Study 2. Two experimental studies with a 2 justice valence (just, unjust) × 2 social comparison processes (autonomous judgements, comparative judgements) between-participants design were conducted. Study 1 addressed distributive justice and Study 2 addressed procedural justice. The dependent variable was teachers' legitimacy. In both studies, situations perceived as just led to higher teachers' legitimacy than situations perceived as unjust. For the distributive injustice conditions, teachers' legitimacy was equally lower for autonomous judgement and comparative judgement conditions. For procedural injustice, teachers' legitimacy was lower when the peer was treated justly and the participant was treated unfairly, compared with the condition when the participants did not know how the teacher treated the peer. We conclude that teachers' injustice affects teachers' legitimacy, but it does it differently according to the social comparisons involved and the type of justice involved. Moreover, these results highlight that social comparisons are an important psychological process and, therefore, they should be taken into account in models of justice. © 2016 The British Psychological Society.

The effect of intensive care unit environments on nurse perceptions of family presence during resuscitation and invasive procedures.

PubMed

Carroll, Diane L

2014-01-01

In a growing number of requests, family members are asking for proximity to their family member during resuscitation and invasive procedures. The objective of this study was to measure the impact of intensive care unit environments on nurse perception of family presence during resuscitation and invasive procedures. The study used a descriptive survey design with nurses from 9 intensive care units using the Family Presence Self-confidence Scale for resuscitation/invasive procedures that measures nurses' perception of self-confidence and Family Presence Risk-Benefit Scale for resuscitation and invasive procedures that measures nurses' perception of risks/benefits related to managing resuscitation and invasive procedures with family present. There were 207 nurses who responded: 14 male and 184 female nurses (9 missing data), with mean age of 41 ± 11 years, with a mean of 15 years in critical care practice. The environments were defined as surgical (n = 68), medical (n = 43), pediatric/neonatal (n = 34), and mixed adult medical/surgical (n = 36) intensive care units. There were significant differences in self-confidence, with medical and pediatric intensive care unit nurses rating more self-confidence for family presence during resuscitation (F = 7.73, P < .000) and invasive procedures (F = 6.41, P < .000). There were significant differences in risks/benefits with medical and pediatric intensive care unit nurses rating lower risk and higher benefit for resuscitation (F = 7.73, P < .000). Perceptions of family presence were significantly higher for pediatric and medical intensive care unit nurses. Further education and support may be needed in the surgical and mixed intensive care units. Evidence-based practice guidelines that are family centered can define the procedures and resources for family presence, to ultimately promote professional practice.

A review of the regenerative endodontic treatment procedure

PubMed Central

Lee, Bin-Na; Moon, Jong-Wook; Chang, Hoon-Sang; Hwang, In-Nam; Oh, Won-Mann

2015-01-01

Traditionally, apexification has been used to treat immature permanent teeth that have lost pulp vitality. This technique promotes the formation of an apical barrier to close the open apex so that the filling materials can be confined to the root canal. Because tissue regeneration cannot be achieved with apexification, a new technique called regenerative endodontic treatment was presented recently to treat immature permanent teeth. Regenerative endodontic treatment is a treatment procedure designed to replace damaged pulp tissue with viable tissue which restores the normal function of the pulp-dentin structure. After regenerative endodontic treatment, continued root development and hard tissue deposition on the dentinal wall can occur under ideal circumstances. However, it is difficult to predict the result of regenerative endodontic treatment. Therefore, the purpose of this study was to summarize multiple factors effects on the result of regenerative endodontic treatment in order to achieve more predictable results. In this study, we investigated the features of regenerative endodontic treatment in comparison with those of other pulp treatment procedures and analyzed the factors that have an effect on regenerative endodontic treatment. PMID:26295020

Dynamic variational asymptotic procedure for laminated composite shells

NASA Astrophysics Data System (ADS)

Lee, Chang-Yong

Unlike published shell theories, the main two parts of this thesis are devoted to the asymptotic construction of a refined theory for composite laminated shells valid over a wide range of frequencies and wavelengths. The resulting theory is applicable to shells each layer of which is made of materials with monoclinic symmetry. It enables one to analyze shell dynamic responses within both long-wavelength, low- and high-frequency vibration regimes. It also leads to energy functionals that are both positive definiteness and sufficient simplicity for all wavelengths. This whole procedure was first performed analytically. From the insight gained from the procedure, a finite element version of the analysis was then developed; and a corresponding computer program, DVAPAS, was developed. DVAPAS can obtain the generalized 2-D constitutive law and recover accurately the 3-D results for stress and strain in composite shells. Some independent works will be needed to develop the corresponding 2-D surface analysis associated with the present theory and to continue towards full verification and validation of the present process by comparison with available published works.

Observational Coding Systems of Parent-Child Interactions During Painful Procedures: A Systematic Review.

PubMed

Bai, Jinbing; Swanson, Kristen M; Santacroce, Sheila J

2018-01-01

Parent interactions with their child can influence the child's pain and distress during painful procedures. Reliable and valid interaction analysis systems (IASs) are valuable tools for capturing these interactions. The extent to which IASs are used in observational research of parent-child interactions is unknown in pediatric populations. To identify and evaluate studies that focus on assessing psychometric properties of initial iterations/publications of observational coding systems of parent-child interactions during painful procedures. To identify and evaluate studies that focus on assessing psychometric properties of initial iterations/publications of observational coding systems of parent-child interactions during painful procedures. Computerized databases searched included PubMed, CINAHL, PsycINFO, Health and Psychosocial Instruments, and Scopus. Timeframes covered from inception of the database to January 2017. Studies were included if they reported use or psychometrics of parent-child IASs. First assessment was whether the parent-child IASs were theory-based; next, using the Society of Pediatric Psychology Assessment Task Force criteria IASs were assigned to one of three categories: well-established, approaching well-established, or promising. A total of 795 studies were identified through computerized searches. Eighteen studies were ultimately determined to be eligible for inclusion in the review and 17 parent-child IASs were identified from these 18 studies. Among the 17 coding systems, 14 were suitable for use in children age 3 years or more; two were theory-based; and 11 included verbal and nonverbal parent behaviors that promoted either child coping or child distress. Four IASs were assessed as well-established; seven approached well-established; and six were promising. Findings indicate a need for the development of theory-based parent-child IASs that consider both verbal and nonverbal parent behaviors during painful procedures. Findings also

Real medical benefit assessed by indirect comparison.

PubMed

Falissard, Bruno; Zylberman, Myriam; Cucherat, Michel; Izard, Valérie; Meyer, François

2009-01-01

Frequently, in data packages submitted for Marketing Approval to the CHMP, there is a lack of relevant head-to-head comparisons of medicinal products that could enable national authorities responsible for the approval of reimbursement to assess the Added Therapeutic Value (ASMR) of new clinical entities or line extensions of existing therapies.Indirect or mixed treatment comparisons (MTC) are methods stemming from the field of meta-analysis that have been designed to tackle this problem. Adjusted indirect comparisons, meta-regressions, mixed models, Bayesian network analyses pool results of randomised controlled trials (RCTs), enabling a quantitative synthesis.The REAL procedure, recently developed by the HAS (French National Authority for Health), is a mixture of an MTC and effect model based on expert opinions. It is intended to translate the efficacy observed in the trials into effectiveness expected in day-to-day clinical practice in France.

The Ultimate Monte Carlo: Studying Cross-Sections With Cosmic Rays

NASA Technical Reports Server (NTRS)

Wilson, Thomas L.

2007-01-01

The high-energy physics community has been discussing for years the need to bring together the three principal disciplines that study hadron cross-section physics - ground-based accelerators, cosmic-ray experiments in space, and air shower research. Only recently have NASA investigators begun discussing the use of space-borne cosmic-ray payloads to bridge the gap between accelerator physics and air shower work using cosmic-ray measurements. The common tool used in these three realms of high-energy hadron physics is the Monte Carlo (MC). Yet the obvious has not been considered - using a single MC for simulating the entire relativistic energy range (GeV to EeV). The task is daunting due to large uncertainties in accelerator, space, and atmospheric cascade measurements. These include inclusive versus exclusive cross-section measurements, primary composition, interaction dynamics, and possible new physics beyond the standard model. However, the discussion of a common tool or ultimate MC might be the very thing that could begin to unify these independent groups into a common purpose. The Offline ALICE concept of a Virtual MC at CERN s Large Hadron Collider (LHC) will be discussed as a rudimentary beginning of this idea, and as a possible forum for carrying it forward in the future as LHC data emerges.

[Surgical procedures in 156 cases of pleural effusion. Immediate results].

PubMed

Cicero-Sabido, Raúl; Páramo-Arroyo, Rafael F; Navarro-Reynoso, Francisco Pascual; Pimentel-Ugarte, Lorenzo

2006-01-01

Pleural effusion is a common clinical entity. Proper diagnosis and management are important for successful treatment. We undertook this study to evaluate immediate results of the procedures used in a group of cases with pleural effusion. Of 2589 patients at first consultation, 787 were hospitalized and 156 had pleural effusion. Diagnostic and therapeutic procedures used were evaluated. With thoracentesis and evacuation of liquid, 23 nonneoplastic cases had resolution. Chest tube drainage with water seal was performed in 133 patients. This procedure suppressed the effusion in 109 patients, but in 24 patients another approach was necessary. In this group there were 35 neoplastic and 96 nonmalignant cases, the latter 36 were provoked by iatrogenic management. Twenty two cases of pneumothorax considered as gaseous effusion and 10 cases of chronic empyema sequelae of pleural effusions were also studied. Proportion comparison demonstrated significant differences between neoplastic and nonneoplastic effusions (p =0.001) and in cases managed with minimally invasive procedures and chest tube drainage (p =0.001). The performance of pleurodesis and thoracoscopy is discussed. In chronic cases, indications of open window thoracostomy and myoplasty are elucidated. In pleural effusion, opportune diagnosis and proper management are essential. Drainage tube can solve the majority of cases. Pneumothorax must be treated in the same way. In chronic empyema, open window thoracostomy and myoplasty are indicated. Careless patient management and poor treatment lead to iatrogenic complications.

Effect of formative evaluation using direct observation of procedural skills in assessment of postgraduate students of obstetrics and gynecology: Prospective study.

PubMed

Kumar, Naina; Singh, Namit Kant; Rudra, Samar; Pathak, Swanand

2017-01-01

Direct Observation of Procedural Skills (DOPS) is a way of evaluating procedural skills through observation in the workplace. The purpose of this study was to assess the role of DOPS in teaching and assessment of postgraduate students and to know the effect of repeated DOPS on improvement of the skills and confidence of the students. In both phases, significant difference was observed between the two groups on first DOPS comparison (1st phase: p=0.000; 2nd phase: p=0.002), with simulation group performing better. Comparison of sixth DOPS in the two groups revealed no difference in both phases, but significant difference on first and sixth DOPS comparison in each group (p=0.000). Repeated DOPS results in improved skills and confidence of students in managing real life obstetric emergencies irrespective of the teaching modality. Repeated DOPS results in improved skills and confidence of students in managing real life obstetric emergencies irrespective of the teaching modality.

Risk of Venous Thromboembolism and Operative Duration in Patients Undergoing Neurosurgical Procedures.

PubMed

Bekelis, Kimon; Labropoulos, Nicos; Coy, Shannon

2017-05-01

The association of operative duration with the risk of venous thromboembolism (VTE) has not been quantified in neurosurgery. To investigate the association of surgical duration for several neurosurgical procedures and the incidence of VTE. We performed a retrospective cohort study involving patients who underwent neurosurgical procedures from 2005 to 2012 and were registered in the American College of Surgeons National Quality Improvement Project registry. In order to control for confounding, we used multivariable regression models, and propensity score conditioning. During the study period, there were 94 747 patients, who underwent neurosurgical procedures, and met the inclusion criteria. Of these, 1358 (1.0%) developed VTE within 30 days postoperatively. Multivariable logistic regression demonstrated an association of longer operative duration with higher 30-day incidence of VTE (odds ratio [OR], 1.22; 95% confidence interval [CI], 1.19-1.25). Compared with procedures of moderate duration (third quintile, 40-60th percentile), patients undergoing the longest procedures (>80th percentile) had higher odds (OR, 3.15; 95% CI, 2.49-3.99) of developing VTE. The shortest procedures (<20th percentile) were associated with a decreased incidence of VTE (OR, 0.51; 95% CI, 0.27-0.76) in comparison to those of moderate duration. The same associations were present in propensity score-adjusted models, and models stratified by subgroups of cranial, spinal, peripheral nerve, and carotid procedures. In a cohort of patients from a national prospective surgical registry, increased operative duration was associated with increased incidence of VTE for neurosurgical procedures. These results can be used by neurosurgeons to inform operative management, and to stratify patients with regard to VTE risk. Copyright © 2016 by the Congress of Neurological Surgeons

Efficiency of performing pulmonary procedures in a shared endoscopy unit: procedure time, turnaround time, delays, and procedure waiting time.

PubMed

Verma, Akash; Lee, Mui Yok; Wang, Chunhong; Hussein, Nurmalah B M; Selvi, Kalai; Tee, Augustine

2014-04-01

The purpose of this study was to assess the efficiency of performing pulmonary procedures in the endoscopy unit in a large teaching hospital. A prospective study from May 20 to July 19, 2013, was designed. The main outcome measures were procedure delays and their reasons, duration of procedural steps starting from patient's arrival to endoscopy unit, turnaround time, total case durations, and procedure wait time. A total of 65 procedures were observed. The most common procedure was BAL (61%) followed by TBLB (31%). Overall procedures for 35 (53.8%) of 65 patients were delayed by ≥ 30 minutes, 21/35 (60%) because of "spillover" of the gastrointestinal and surgical cases into the time block of pulmonary procedure. Time elapsed between end of pulmonary procedure and start of the next procedure was ≥ 30 minutes in 8/51 (16%) of cases. In 18/51 (35%) patients there was no next case in the room after completion of the pulmonary procedure. The average idle time of the room after the end of pulmonary procedure and start of next case or end of shift at 5:00 PM if no next case was 58 ± 53 minutes. In 17/51 (33%) patients the room's idle time was >60 minutes. A total of 52.3% of patients had the wait time >2 days and 11% had it ≥ 6 days, reason in 15/21 (71%) being unavailability of the slot. Most pulmonary procedures were delayed due to spillover of the gastrointestinal and surgical cases into the block time allocated to pulmonary procedures. The most common reason for difficulty encountered in scheduling the pulmonary procedure was slot unavailability. This caused increased procedure waiting time. The strategies to reduce procedure delays and turnaround times, along with improved scheduling methods, may have a favorable impact on the volume of procedures performed in the unit thereby optimizing the existing resources.

Holding Children for Clinical Procedures: Perseverance in Spite of or Persevering to be Child-Centered.

PubMed

Bray, Lucy; Carter, Bernie; Snodin, Jill

2016-02-01

Children in acute care often need procedures and interventions, and they are frequently held, often against their wishes, to enable these procedures to be completed. This report is from a qualitative investigation in which we sought to explore what happens when children undergo clinical procedures within an acute hospital, with a focus on the use of holding for procedures. Qualitative data were generated through non-participant observation of clinical procedures (n = 31) and semi-structured interviews with health professionals (n = 22), parents (n = 21), and children (n = 4) to explore the event from the participants' perspective. Data were analyzed using constant comparison. Through the central theoretical concept of perseverance, we examined the actions, inactions and interactions of health professionals, parents and children during a clinical procedure. Two broad trajectories were noted: "perseverance in spite of," when the procedure was completed despite a child's upset and lack of co-operation; and "perseverance to be child-centered," which was characterized by a purposeful plan of action focused on a child who had been prepared and informed, and which was facilitated by a "window of opportunity" at the start of the procedure when the child was calm and engaged. Our findings highlight that professionals need to be clear about their boundaries when starting or continuing with a procedure when a child is distressed, and support preparation and engagement activities with children and parents before, during, and after clinical procedures. © 2015 Wiley Periodicals, Inc.

Addition of zinc methacrylate in dental polymers: MMP-2 inhibition and ultimate tensile strength evaluation.

PubMed

Henn, Sandrina; de Carvalho, Rodrigo Varella; Ogliari, Fabrício Aulo; de Souza, Ana Paula; Line, Sergio Roberto Peres; da Silva, Adriana Fernandes; Demarco, Flávio Fernando; Etges, Adriana; Piva, Evandro

2012-04-01

This study evaluated the effect of zinc methacrylate (ZM) on the inhibition of matrix metalloproteinase 2 (MMP-2) and the ultimate tensile strength (UTS) of an experimental polymer. Enzymes secreted from mouse gingival tissues were analyzed by gelatin zymography in buffers containing 5 mM CaCl(2) (Tris-CaCl(2)) in 50 mM Tris-HCl buffer with various concentrations of ZM (0.5, 1, 2, 4, 8, and 16 mM). The matrix metalloproteinases present in the conditioned media were characterized by immunoprecipitation. The polymer UTS evaluation was performed in eight groups with various concentrations of ZM (0, 0.5, 1, 2.5, 5, 10, 20, and 30 wt.%), in a mechanical testing machine. MMP-2 (62 kDa) was detected in the zymographic assays and inhibited by ZM in all tested concentrations. UTS data were submitted to one-way ANOVA and Tukey's test (α = 0.05), and no significant differences were observed among groups, except in the polymer containing 30% ZM, presenting a significantly lower value when compared with the control group (p < 0.05). The results suggest that ZM inhibits MMP-2 expression in all concentrations tested, while small concentrations did not affect the ultimate tensile strength of the polymer. Zinc methacrylate is a metalloproteinase inhibitor that can be copolymerized with other methacrylate monomers. Yet, the addition of ZM did not affect the resin bond strength. Thus, in vivo tests should be performed to evaluate the performance of this material.

Experimental congruence of interval scale production from paired comparisons and ranking for image evaluation

NASA Astrophysics Data System (ADS)

Handley, John C.; Babcock, Jason S.; Pelz, Jeff B.

2003-12-01

Image evaluation tasks are often conducted using paired comparisons or ranking. To elicit interval scales, both methods rely on Thurstone's Law of Comparative Judgment in which objects closer in psychological space are more often confused in preference comparisons by a putative discriminal random process. It is often debated whether paired comparisons and ranking yield the same interval scales. An experiment was conducted to assess scale production using paired comparisons and ranking. For this experiment a Pioneer Plasma Display and Apple Cinema Display were used for stimulus presentation. Observers performed rank order and paired comparisons tasks on both displays. For each of five scenes, six images were created by manipulating attributes such as lightness, chroma, and hue using six different settings. The intention was to simulate the variability from a set of digital cameras or scanners. Nineteen subjects, (5 females, 14 males) ranging from 19-51 years of age participated in this experiment. Using a paired comparison model and a ranking model, scales were estimated for each display and image combination yielding ten scale pairs, ostensibly measuring the same psychological scale. The Bradley-Terry model was used for the paired comparisons data and the Bradley-Terry-Mallows model was used for the ranking data. Each model was fit using maximum likelihood estimation and assessed using likelihood ratio tests. Approximate 95% confidence intervals were also constructed using likelihood ratios. Model fits for paired comparisons were satisfactory for all scales except those from two image/display pairs; the ranking model fit uniformly well on all data sets. Arguing from overlapping confidence intervals, we conclude that paired comparisons and ranking produce no conflicting decisions regarding ultimate ordering of treatment preferences, but paired comparisons yield greater precision at the expense of lack-of-fit.

Use of restorative procedures by allied dental health professionals in Minnesota.

PubMed

Post, Jennifer J; Stoltenberg, Jill L

2014-10-01

In 2003, the Minnesota legislature revised the Dental Practice Act to include restorative procedures in the scope of practice for registered dental assistants (RDAs) and registered dental hygienists (RDHs). The authors examined these practitioners' characteristics and made comparisons on the basis of their use of restorative function (RF) training and their practices' locations. They also examined practice type, models of implementation and perceived outcomes. The authors mailed a survey to all RF-certified RDAs and RDHs in Minnesota (N = 387). They used descriptive statistics to summarize the data and t tests and Fisher exact tests (P <.0001) to make comparisons between groups. The authors received 243 surveys (63 percent). Less than one-half (38 percent) of the RF-certified practitioners performed RFs. Of these, 29 percent were RDHs and 71 percent were RDAs. These practitioners performed RFs most often by working with a dentist or when time allowed. They perceived increased access to dental care and an increase in the number of patients treated to be outcomes of performing RFs. The results of this survey indicated use of restorative procedures varied greatly by practitioner type. The perceptions of those who performed RFs indicated they had a positive effect on dental practice. The addition of RF-certified personnel to the dental team has the potential to increase the number of patients seen in practice and the job satisfaction of team members.

Case studies, cross-site comparisons, and the challenge of generalization: comparing agent-based models of land-use change in frontier regions

PubMed Central

Parker, Dawn C.; Entwisle, Barbara; Rindfuss, Ronald R.; Vanwey, Leah K.; Manson, Steven M.; Moran, Emilio; An, Li; Deadman, Peter; Evans, Tom P.; Linderman, Marc; Rizi, S. Mohammad Mussavi; Malanson, George

2009-01-01

Cross-site comparisons of case studies have been identified as an important priority by the land-use science community. From an empirical perspective, such comparisons potentially allow generalizations that may contribute to production of global-scale land-use and land-cover change projections. From a theoretical perspective, such comparisons can inform development of a theory of land-use science by identifying potential hypotheses and supporting or refuting evidence. This paper undertakes a structured comparison of four case studies of land-use change in frontier regions that follow an agent-based modeling approach. Our hypothesis is that each case study represents a particular manifestation of a common process. Given differences in initial conditions among sites and the time at which the process is observed, actual mechanisms and outcomes are anticipated to differ substantially between sites. Our goal is to reveal both commonalities and differences among research sites, model implementations, and ultimately, conclusions derived from the modeling process. PMID:19960107

Case studies, cross-site comparisons, and the challenge of generalization: comparing agent-based models of land-use change in frontier regions.

PubMed

Parker, Dawn C; Entwisle, Barbara; Rindfuss, Ronald R; Vanwey, Leah K; Manson, Steven M; Moran, Emilio; An, Li; Deadman, Peter; Evans, Tom P; Linderman, Marc; Rizi, S Mohammad Mussavi; Malanson, George

2008-01-01

Cross-site comparisons of case studies have been identified as an important priority by the land-use science community. From an empirical perspective, such comparisons potentially allow generalizations that may contribute to production of global-scale land-use and land-cover change projections. From a theoretical perspective, such comparisons can inform development of a theory of land-use science by identifying potential hypotheses and supporting or refuting evidence. This paper undertakes a structured comparison of four case studies of land-use change in frontier regions that follow an agent-based modeling approach. Our hypothesis is that each case study represents a particular manifestation of a common process. Given differences in initial conditions among sites and the time at which the process is observed, actual mechanisms and outcomes are anticipated to differ substantially between sites. Our goal is to reveal both commonalities and differences among research sites, model implementations, and ultimately, conclusions derived from the modeling process.

A theoretical approach for estimation of ultimate size of bimetallic nanocomposites synthesized in microemulsion systems

NASA Astrophysics Data System (ADS)

Salabat, Alireza; Saydi, Hassan

2012-12-01

In this research a new idea for prediction of ultimate sizes of bimetallic nanocomposites synthesized in water-in-oil microemulsion system is proposed. In this method, by modifying Tabor Winterton approximation equation, an effective Hamaker constant was introduced. This effective Hamaker constant was applied in the van der Waals attractive interaction energy. The obtained effective van der Waals interaction energy was used as attractive contribution in the total interaction energy. The modified interaction energy was applied successfully to predict some bimetallic nanoparticles, at different mass fraction, synthesized in microemulsion system of dioctyl sodium sulfosuccinate (AOT)/isooctane.

Age-related changes in the cerebral substrates of cognitive procedural learning.

PubMed

Hubert, Valérie; Beaunieux, Hélène; Chételat, Gaël; Platel, Hervé; Landeau, Brigitte; Viader, Fausto; Desgranges, Béatrice; Eustache, Francis

2009-04-01

Cognitive procedural learning occurs in three qualitatively different phases (cognitive, associative, and autonomous). At the beginning of this process, numerous cognitive functions are involved, subtended by distinct brain structures such as the prefrontal and parietal cortex and the cerebellum. As the learning progresses, these cognitive components are gradually replaced by psychomotor abilities, reflected by the increasing involvement of the cerebellum, thalamus, and occipital regions. In elderly subjects, although cognitive studies have revealed a learning effect, performance levels differ during the acquisition of a procedure. The effects of age on the learning of a cognitive procedure have not yet been examined using functional imaging. The aim of this study was therefore to characterize the cerebral substrates involved in the learning of a cognitive procedure, comparing a group of older subjects with young controls. For this purpose, we performed a positron emission tomography activation study using the Tower of Toronto task. A direct comparison of the two groups revealed the involvement of a similar network of brain regions at the beginning of learning (cognitive phase). However, the engagement of frontal and cingulate regions persisted in the older group as learning continued, whereas it ceased in the younger controls. We assume that this additional activation in the older group during the associative and autonomous phases reflected compensatory processes and the fact that some older subjects failed to fully automate the procedure. 2008 Wiley-Liss, Inc.

Designing Flightdeck Procedures

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Mauro, Robert; Degani, Asaf; Loukopoulou, Loukia

2016-01-01

The primary goal of this document is to provide guidance on how to design, implement, and evaluate flight deck procedures. It provides a process for developing procedures that meet clear and specific requirements. This document provides a brief overview of: 1) the requirements for procedures, 2) a process for the design of procedures, and 3) a process for the design of checklists. The brief overview is followed by amplified procedures that follow the above steps and provide details for the proper design, implementation and evaluation of good flight deck procedures and checklists.

Hierarchical nanoporous metals as a path toward the ultimate three-dimensional functionality.

PubMed

Fujita, Takeshi

2017-01-01

Nanoporous metals prepared via dealloying or selective leaching of solid solution alloys and compounds represent an emerging class of materials. They possess a three-dimensional (3D) structure of randomly interpenetrating ligaments/nanopores with sizes between 5 nm and several tens of micrometers, which can be tuned by varying their preparation conditions (such as dealloying time and temperature) or additional thermal coarsening. As compared to other nanostructured materials, nanoporous metals have many advantages, including their bicontinuous structure, tunable pore sizes, bulk form, good electrical conductivity, and high structural stability. Therefore, nanoporous metals represent ideal 3D materials with versatile functionality, which can be utilized in various fields. In this review, we describe the recent applications of nanoporous metals in molecular detection, catalysis, 3D graphene synthesis, hierarchical pore formation, and additive manufacturing (3D printing) together with our own achievements in these areas. Finally, we discuss possible ways of realizing the ultimate 3D functionality beyond the scope of nanoporous metals.

Hierarchical nanoporous metals as a path toward the ultimate three-dimensional functionality

PubMed Central

Fujita, Takeshi

2017-01-01

Abstract Nanoporous metals prepared via dealloying or selective leaching of solid solution alloys and compounds represent an emerging class of materials. They possess a three-dimensional (3D) structure of randomly interpenetrating ligaments/nanopores with sizes between 5 nm and several tens of micrometers, which can be tuned by varying their preparation conditions (such as dealloying time and temperature) or additional thermal coarsening. As compared to other nanostructured materials, nanoporous metals have many advantages, including their bicontinuous structure, tunable pore sizes, bulk form, good electrical conductivity, and high structural stability. Therefore, nanoporous metals represent ideal 3D materials with versatile functionality, which can be utilized in various fields. In this review, we describe the recent applications of nanoporous metals in molecular detection, catalysis, 3D graphene synthesis, hierarchical pore formation, and additive manufacturing (3D printing) together with our own achievements in these areas. Finally, we discuss possible ways of realizing the ultimate 3D functionality beyond the scope of nanoporous metals. PMID:29057026

Probing the ultimate plasmon confinement limits with a van der Waals heterostructure.

PubMed

Alcaraz Iranzo, David; Nanot, Sébastien; Dias, Eduardo J C; Epstein, Itai; Peng, Cheng; Efetov, Dmitri K; Lundeberg, Mark B; Parret, Romain; Osmond, Johann; Hong, Jin-Yong; Kong, Jing; Englund, Dirk R; Peres, Nuno M R; Koppens, Frank H L

2018-04-20

The ability to confine light into tiny spatial dimensions is important for applications such as microscopy, sensing, and nanoscale lasers. Although plasmons offer an appealing avenue to confine light, Landau damping in metals imposes a trade-off between optical field confinement and losses. We show that a graphene-insulator-metal heterostructure can overcome that trade-off, and demonstrate plasmon confinement down to the ultimate limit of the length scale of one atom. This is achieved through far-field excitation of plasmon modes squeezed into an atomically thin hexagonal boron nitride dielectric spacer between graphene and metal rods. A theoretical model that takes into account the nonlocal optical response of both graphene and metal is used to describe the results. These ultraconfined plasmonic modes, addressed with far-field light excitation, enable a route to new regimes of ultrastrong light-matter interactions. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Hierarchical nanoporous metals as a path toward the ultimate three-dimensional functionality

NASA Astrophysics Data System (ADS)

Fujita, Takeshi

2017-12-01

Nanoporous metals prepared via dealloying or selective leaching of solid solution alloys and compounds represent an emerging class of materials. They possess a three-dimensional (3D) structure of randomly interpenetrating ligaments/nanopores with sizes between 5 nm and several tens of micrometers, which can be tuned by varying their preparation conditions (such as dealloying time and temperature) or additional thermal coarsening. As compared to other nanostructured materials, nanoporous metals have many advantages, including their bicontinuous structure, tunable pore sizes, bulk form, good electrical conductivity, and high structural stability. Therefore, nanoporous metals represent ideal 3D materials with versatile functionality, which can be utilized in various fields. In this review, we describe the recent applications of nanoporous metals in molecular detection, catalysis, 3D graphene synthesis, hierarchical pore formation, and additive manufacturing (3D printing) together with our own achievements in these areas. Finally, we discuss possible ways of realizing the ultimate 3D functionality beyond the scope of nanoporous metals.

Comparison of the Modified McBride Procedure and the Distal Chevron Osteotomy for Mild to Moderate Hallux Valgus.

PubMed

Choi, Gi Won; Kim, Hak Jun; Kim, Taik Seon; Chun, Sung Kwang; Kim, Tae Wan; Lee, Yong In; Kim, Kyoung Ho

2016-01-01

Distal metatarsal osteotomy and the modified McBride procedure have each been used for the treatment of mild to moderate hallux valgus. However, few studies have compared the results of these 2 procedures for mild to moderate hallux valgus. The purpose of the present study was to compare the results of distal chevron osteotomy and the modified McBride procedure for treatment of mild to moderate hallux valgus according to the severity of the deformity. We analyzed the data from 45 patients (49.5%; 48 feet [49.0%]), who had undergone an isolated modified McBride procedure (McBride group), and 46 patients (50.5%; 50 feet [51.0%]), who had a distal chevron osteotomy (chevron group). We subdivided each group into those with mild and moderate deformity and compared the clinical and radiologic outcomes between the groups in relation to the severity of the deformity. The improvements in the American Orthopaedic Foot and Ankle Society scale score and the visual analog scale for pain were significantly better for the chevron group for both mild and moderate deformity. The chevron group experienced significantly greater correction in the hallux valgus angle and intermetatarsal angle for both mild and moderate deformity. The chevron group experienced a significantly greater decrease in the grade of sesamoid displacement for patients with moderate deformity. The McBride group had a greater risk of recurrence than did the chevron group for moderate deformity (odds ratio 14.00, 95% confidence interval 3.91 to 50.06, p < .001). The results of the present study have demonstrated the superiority of the distal chevron osteotomy over the modified McBride procedure for mild to moderate deformity. For patients with moderate deformity, the McBride group had a greater risk of hallux valgus recurrence than did the distal chevron group. Therefore, we recommend distal chevron osteotomy rather than a modified McBride procedure for the treatment of mild and moderate hallux valgus. Copyright

Effects of conventional welding and laser welding on the tensile strength, ultimate tensile strength and surface characteristics of two cobalt-chromium alloys: a comparative study.

PubMed

Madhan Kumar, Seenivasan; Sethumadhava, Jayesh Raghavendra; Anand Kumar, Vaidyanathan; Manita, Grover

2012-06-01

The purpose of this study was to evaluate the efficacy of laser welding and conventional welding on the tensile strength and ultimate tensile strength of the cobalt-chromium alloy. Samples were prepared with two commercially available cobalt-chromium alloys (Wironium plus and Diadur alloy). The samples were sectioned and the broken fragments were joined using Conventional and Laser welding techniques. The welded joints were subjected to tensile and ultimate tensile strength testing; and scanning electron microscope to evaluate the surface characteristics at the welded site. Both on laser welding as well as on conventional welding technique, Diadur alloy samples showed lesser values when tested for tensile and ultimate tensile strength when compared to Wironium alloy samples. Under the scanning electron microscope, the laser welded joints show uniform welding and continuous molt pool all over the surface with less porosity than the conventionally welded joints. Laser welding is an advantageous method of connecting or repairing cast metal prosthetic frameworks.

[Preparation of sedation-analgesia procedures in spanish paediatric emergency departments: A descriptive study].

PubMed

Míguez Navarro, Concepción; Oikonomopoulou, Niki; Lorente Romero, Jorge; Vázquez López, Paula

2017-07-24

The objective of this study was to describe the current practice regarding the preparation of the sedation-analgesia (SA) procedures performed in the paediatric emergency centres in Spain. A multicentre, observational and prospective analytical study was carried out on the SA procedures that were performed on children under 18 years-old in 18 paediatric emergency departments between February 2015 and January 2016. A total of 658 SA procedures were registered in 18 hospitals of Spain, most of them to children older than 24 months. The type of the procedure was: simple analgesia in 57 (8.6%), sedation in 44 (6.7%), SA for a not very painful procedure in 275 (41.8%), and SA for a very painful procedure in 282 (42.9%). Informed consent was requested in 98.6% of the cases. The written form was more frequently preferred in the group of patients that received SA for a very painful procedure (76.6%) in comparison to a painful procedure or to simple analgesia (62.9% and 54.4%, respectively, P<.001). The staff that most frequently performed the SA procedures were the paediatricians of the emergency departments (64.3%), followed by Paediatrics Residents (30.7%). The most frequent reasons for the SA were traumatological (35.9%) and surgical (28.4%). Fasting was observed in 81% of the cases. More than two-thirds (67.3%, n=480) children were monitored, the majority (95.8%) of them using pulse oximetry. The pharmacological strategy used was the administration of one drug in 443 (67.3%) of the cases, mostly nitrous oxide, and a combination of drugs in 215 (32.7%), especially midazolam/ketamine (46.9%). The majority of the SA procedures analysed in this study have been carried out correctly and prepared in accordance with the current guidelines. Copyright © 2017. Publicado por Elsevier España, S.L.U.

KEY COMPARISON: CCQM-K21 Key Comparison Determination of pp’-DDT in fish oil

NASA Astrophysics Data System (ADS)

Webb, K. S.; Carter, D.; Wolff Briche, C. S. J.

2003-01-01

A key comparison on the determination of (pp'-dichlorodiphenyl) trichloroethane (pp'-DDT) in a fish oil matrix has been successfully completed. Nine NMIs participated in this key comparison and used the technique of isotope dilution gas-chromatography mass spectrometry (ID/GC/MS) for the determinations. Two samples (A and B) of fish oil were distributed to participants, each gravimetrically spiked with pp'-DDT. The KCRV for Sample A is 0.0743 +/- 0.0020 µg g-1 and that of Sample B is 0.1655 +/- 0.0014 µg g-1 of pp'-DDT in fish oil. The results for Sample A showed a RSD of 3.5%, the RSD for Sample B was within 1%. These results were an improvement over those of the corresponding pilot study (CCQM-P21), where at a mass fraction of pp'-DDT in fish oil of 0.311 µg g-1 the RSD was 2.6%. The compound pp'-DDT is a typical organochlorine pesticide and this key comparison has shown that NMIs have the ability to measure such compounds at levels typically found in the environment. The compound (pp'-dichlorodiphenyl) dichloroethylene (pp'-DDE), a metabolite of pp'-DDT, was the subject of a previous key comparison (CCQM-K5). The compound pp'-DDT is technically more challenging than that of pp'-DDE since it can decompose during the measurement procedure. Consequently the success of this key comparison, combined with that of CCQM-K5 demonstrates a broad measurement capability by NMIs for organochlorine compounds in the environment. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the Mutual Recognition Arrangement (MRA).

Endotracheal intubation - A life saving procedure, still potential hazardous to upper airway: A case report.

PubMed

Afreen, Mahrukh; Ansari, Murtaza Ahsan

2015-12-01

Endotracheal intubation plays a key role in the management of upper airway obstruction in emergency situations. It is non-invasive and easily learned technique by medical professionals as compared to other more skilled, surgical procedures, e.g., tracheostomy and cricothyrotomies etc. But prolonged intubation may result in numerous complications, most notorious being tracheoesophageal fistula and narrowing of subglottic area. We report a profile of a patient who had been diagnosed as case of Guillian-Barre Syndrome, had difficulty in breathing due to paralysis of respiratory muscles. The patient was admitted in Medical Intensive Care Unit (MICU) for 40 days and was kept on artificial breathing through endotracheal intubation, which remained in place for 19 days. Later tracheostomy was performed. Patient ultimately developed severe subglottic stenosis and became dependent on tracheostomy tube.

Short- and long-term effects of clinical audits on compliance with procedures in CT scanning.

PubMed

Oliveri, Antonio; Howarth, Nigel; Gevenois, Pierre Alain; Tack, Denis

2016-08-01

To test the hypothesis that quality clinical audits improve compliance with the procedures in computed tomography (CT) scanning. This retrospective study was conducted in two hospitals, based on 6950 examinations and four procedures, focusing on the acquisition length in lumbar spine CT, the default tube current applied in abdominal un-enhanced CT, the tube potential selection for portal phase abdominal CT and the use of a specific "paediatric brain CT" procedure. The first clinical audit reported compliance with these procedures. After presenting the results to the stakeholders, a second audit was conducted to measure the impact of this information on compliance and was repeated the next year. Comparisons of proportions were performed using the Chi-square Pearson test. Depending on the procedure, the compliance rate ranged from 27 to 88 % during the first audit. After presentation of the audit results to the stakeholders, the compliance rate ranged from 68 to 93 % and was significantly improved for all procedures (P ranging from <0.001 to 0.031) in both hospitals and remained unchanged during the third audit (P ranging from 0.114 to 0.999). Quality improvement through repeated compliance audits with CT procedures durably improves this compliance. • Compliance with CT procedures is operator-dependent and not perfect. • Compliance differs between procedures and hospitals, even within a unified department. • Compliance is improved through audits followed by communication to the stakeholders. • This improvement is sustainable over a one-year period.

Classifying the Indication for Colonoscopy Procedures: A Comparison of NLP Approaches in a Diverse National Healthcare System.

PubMed

Patterson, Olga V; Forbush, Tyler B; Saini, Sameer D; Moser, Stephanie E; DuVall, Scott L

2015-01-01

In order to measure the level of utilization of colonoscopy procedures, identifying the primary indication for the procedure is required. Colonoscopies may be utilized not only for screening, but also for diagnostic or therapeutic purposes. To determine whether a colonoscopy was performed for screening, we created a natural language processing system to identify colonoscopy reports in the electronic medical record system and extract indications for the procedure. A rule-based model and three machine-learning models were created using 2,000 manually annotated clinical notes of patients cared for in the Department of Veterans Affairs. Performance of the models was measured and compared. Analysis of the models on a test set of 1,000 documents indicates that the rule-based system performance stays fairly constant as evaluated on training and testing sets. However, the machine learning model without feature selection showed significant decrease in performance. Therefore, rule-based classification system appears to be more robust than a machine-learning system in cases when no feature selection is performed.

Comparison of Fixed Point Realisations between Inmetro and PTB

NASA Astrophysics Data System (ADS)

Santiago, J. F. N.; Petkovic, S. G.; Teixeira, R. N.; Noatsch, U.; Thiele-Krivoj, B.

2003-09-01

An interlaboratory comparison in the temperature range between -190 °C and 420 °C was organised between the National Institute of Quality, Normalisation and Industrial Quality (Inmetro), Brazil, and the Physikalisch Technische Bundesanstalt (PTB), Germany. This comparison followed the same protocol as the EUROMET project 552 comparison and was carried out in the years 2001-2002. A standard platinum resistance thermometer (SPRT) of 25 Ω was calibrated at the temperature fixed points of Ar, Hg, the triple point of water (TWP), Ga, In, Sn and Zn, with at least three realisations of each fixed point at both institutes. The uncertainty evaluation is given by Inmetro and some differences in the calibration procedures or in the measuring instruments used are described. The agreement between the results of laboratories was not in all cases within the combined uncertainties. Results of other comparisons are presented, which give additional information on the equivalence of the realised temperature scales.

A COMPARISON OF TWO PAIRING PROCEDURES TO ESTABLISH PRAISE AS A REINFORCER

PubMed Central

Dozier, Claudia L.; Iwata, Brian A.; Thomason-Sassi, Jessica; Worsdell, April S.; Wilson, David M.

2012-01-01

Some individuals with intellectual disabilities do not respond to praise as a reinforcer, which may limit their ability to learn. We evaluated 2 procedures (stimulus pairing and response–stimulus pairing), both of which involved pairing previously neutral praise statements with preferred edible items, to determine their usefulness in establishing praise as a reinforcer. Results of Study 1 indicated that stimulus pairing was not effective in conditioning praise as a reinforcer for 3 of 4 subjects; results were inconclusive for the 4th subject. Results of Study 2 indicated that response–stimulus pairing was effective in conditioning praise as a reinforcer for 4 of 8 subjects. After conditioning, praise also increased the occurrence of additional target responses for these 4 subjects. PMID:23322928

Longitudinal trends with improvement in quality of life after TVT, TVT O and Burch colposuspension procedures.

PubMed

Drahoradova, Petra; Martan, Alois; Svabik, Kamil; Zvara, Karel; Otava, Martin; Masata, Jaromir

2011-02-01

Comparison of the quality of life (QoL) trends after TVT, TVT O and Burch colposuspension (BCS) procedures and comparison of long-term subjective and objective outcomes. The study included 215 women who underwent a TVT, TVT O or BCS procedure. We monitored QoL after each procedure and the effect of complications on the QoL as assessed by the IQOL questionnaire over a 3-year period. The study was completed by 74.5% of women after TVT, 74.5% after TVT O, and 65.2% after BCS procedure. In the long-term, the QoL improved from 46.9 to 88.7 and remained stable after BCS; after TVT and TVT O, it declined, but only after TVT O was the decline statistically significant compared to BCS. The IQOL for women with post-operative complications has a clear descending tendency. The effect of the complications is highly significant (p<0.001). Only the OAB complication had a statistically significant effect on QoL p<0.001. Preexistent OAB does not negatively affect postoperative results of anti-incontinence surgery. There was a statistically significant decline with the longitudinal values of IQOL with TVT O, but not with TVT or BCS. Anti-incontinence operations significantly improve quality of life for women with MI, but compared to the SI group, the quality of life is worse when measured at a longer time interval after the operation. Anti-incontinence operations significantly improve quality of life, and the difference in preoperative status in the long-term follow-up is demonstrable.

A uni-extension study on the ultimate material strength and extreme extensibility of atherosclerotic tissue in human carotid plaques.

PubMed

Teng, Zhongzhao; Feng, Jiaxuan; Zhang, Yongxue; Sutcliffe, Michael P F; Huang, Yuan; Brown, Adam J; Jing, Zaiping; Lu, Qingsheng; Gillard, Jonathan H

2015-11-05

Atherosclerotic plaque rupture occurs when mechanical loading exceeds its material strength. Mechanical analysis has been shown to be complementary to the morphology and composition for assessing vulnerability. However, strength and stretch thresholds for mechanics-based assessment are currently lacking. This study aims to quantify the ultimate material strength and extreme extensibility of atherosclerotic components from human carotid plaques. Tissue strips of fibrous cap, media, lipid core and intraplaque hemorrhage/thrombus were obtained from 21 carotid endarterectomy samples of symptomatic patients. Uni-extension test with tissue strips was performed until they broke or slid. The Cauchy stress and stretch ratio at the peak loading of strips broken about 2mm away from the clamp were used to characterize their ultimate strength and extensibility. Results obtained indicated that ultimate strength of fibrous cap and media were 158.3 [72.1, 259.3] kPa (Median [Inter quartile range]) and 247.6 [169.0, 419.9] kPa, respectively; those of lipid and intraplaque hemorrhage/thrombus were 68.8 [48.5, 86.6] kPa and 83.0 [52.1, 124.9] kPa, respectively. The extensibility of each tissue type were: fibrous cap - 1.18 [1.10, 1.27]; media - 1.21 [1.17, 1.32]; lipid - 1.25 [1.11, 1.30] and intraplaque hemorrhage/thrombus - 1.20 [1.17, 1.44]. Overall, the strength of fibrous cap and media were comparable and so were lipid and intraplaque hemorrhage/thrombus. Both fibrous cap and media were significantly stronger than either lipid or intraplaque hemorrhage/thrombus. All atherosclerotic components had similar extensibility. Moreover, fibrous cap strength in the proximal region (closer to the heart) was lower than that of the distal. These results are helpful in understanding the material behavior of atherosclerotic plaques. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Assessment of simple colorimetric procedures to determine smoking status of diabetic subjects.

PubMed

Smith, R F; Mather, H M; Ellard, G A

1998-02-01

The performance of a simple colorimetric assay for urinary nicotine metabolites to assess smoking status in diabetic subjects (n = 251) was investigated. Several variations of the colorimetric assay and a qualitative extraction procedure were evaluated in comparison with a cotinine immunoassay as the "gold standard." Among these, the best overall performance was achieved with the qualitative test (sensitivity 95%; specificity 100%). The quantitative measurement of total nicotine metabolites performed less well (sensitivity 92%; specificity 97%) but could be improved by incorporating a blank extraction (sensitivity 98%; specificity 98%). Allowance for diuresis appeared to offer no advantage over the other methods. These results support previous findings regarding the use of these colorimetric procedures in nondiabetic subjects and, contrary to other recent observations, their performance was not impaired in diabetic patients.

Experimental Verification of Buffet Calculation Procedure Using Unsteady PSP

NASA Technical Reports Server (NTRS)

Panda, Jayanta

2016-01-01

Typically a limited number of dynamic pressure sensors are employed to determine the unsteady aerodynamic forces on large, slender aerospace structures. The estimated forces are known to be very sensitive to the number of the dynamic pressure sensors and the details of the integration scheme. This report describes a robust calculation procedure, based on frequency-specific correlation lengths, that is found to produce good estimation of fluctuating forces from a few dynamic pressure sensors. The validation test was conducted on a flat panel, placed on the floor of a wind tunnel, and was subjected to vortex shedding from a rectangular bluff-body. The panel was coated with fast response Pressure Sensitive Paint (PSP), which allowed time-resolved measurements of unsteady pressure fluctuations on a dense grid of spatial points. The first part of the report describes the detail procedure used to analyze the high-speed, PSP camera images. The procedure includes steps to reduce contamination by electronic shot noise, correction for spatial non-uniformities, and lamp brightness variation, and finally conversion of fluctuating light intensity to fluctuating pressure. The latter involved applying calibration constants from a few dynamic pressure sensors placed at selective points on the plate. Excellent comparison in the spectra, coherence and phase, calculated via PSP and dynamic pressure sensors validated the PSP processing steps. The second part of the report describes the buffet validation process, for which the first step was to use pressure histories from all PSP points to determine the "true" force fluctuations. In the next step only a selected number of pixels were chosen as "virtual sensors" and a correlation-length based buffet calculation procedure was applied to determine "modeled" force fluctuations. By progressively decreasing the number of virtual sensors it was observed that the present calculation procedure was able to make a close estimate of the "true

Computerized procedures system

DOEpatents

Lipner, Melvin H.; Mundy, Roger A.; Franusich, Michael D.

2010-10-12

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

Comparison of a modified shell vial culture procedure with conventional mouse inoculation for rabies virus isolation.

PubMed

Ribas Antúnez, María de los Angeles; Girón, Blanca; Monsalvez, Iraima; Morier, Luis; Acosta, Gretel; Tejero, Yahisel; Cordero, Yanislet; Piedra, Dainelyd

2013-04-01

Rabies is a neurotropic disease that is often lethal. The early diagnosis of rabies infection is important and requires methods that allow for the isolation of the virus from animals and humans. The present study compared a modified shell vial (MSV) procedure using 24-well tissue culture plates with the mouse inoculation test (MIT), which is considered the gold standard for rabies virus isolation. Thirty brain samples (25 positive and 5 negative by the fluorescent antibody test) obtained from different animal species at the National Institute of Hygiene Rafael Rangel in Caracas, Venezuela, were studied by the MIT and MSV assays. Nine samples (36%) were positive at 24 h, 10 (40%) were positive at 48 h and six (24%) were positive at 72 h by the MSV assay. With the MIT assay, 76% were positive at six days post inoculation and 12% were positive at 12 and 18 days post inoculation. One sample that was negative according to the MSV assay was positive with MIT on the 12th day. The MSV procedure exhibited a sensitivity of 96.2%, a specificity of 100%, a positive predictive value of 100% and a negative predictive value 80%. This procedure allowed for rapid rabies virus detection. MIT can be employed as an alternative method in laboratories without tissue culture facilities.

Anatomic suture anchor versus the Broström technique for anterior talofibular ligament repair: a biomechanical comparison.

PubMed

Waldrop, Norman E; Wijdicks, Coen A; Jansson, Kyle S; LaPrade, Robert F; Clanton, Thomas O

2012-11-01

Despite the popularity of the Broström procedure for secondary repair of chronic lateral ankle instability, there have been no biomechanical studies reporting on the strength of this secondary repair method, whether using suture fixation or suture anchors. The purpose of our study was to perform a biomechanical comparison of the ultimate load to failure and stiffness of the traditional Broström technique using only a suture repair compared with a suture anchor repair of the anterior talofibular ligament (ATFL) at time zero. We believed that fixation strength of the suture anchor repair would be closer to the strength of the native ligament and allow more aggressive rehabilitation. Controlled laboratory study. Twenty-four fresh-frozen cadaveric ankles were randomly divided into 4 groups of 6 specimens. One group was an intact control group, and the other groups consisted of the traditional Broström and 2 suture anchor modifications (suture anchors in talus or fibula) of the Broström procedure. The specimens were loaded to failure to determine the strength and stiffness of each construct. In load-to-failure testing, ultimate failure loads of the Broström (68.2 ± 27.8 N; P = .013), suture anchor fibula (79.2 ± 34.3 N; P = .037), and suture anchor talus (75.3 ± 45.6 N; P = .027) repairs were significantly lower than that of the intact (160.9 ± 72.2 N) ATFL group. Stiffness of the Broström (6.0 ± 2.5 N/mm; P = .02), suture anchor fibula (6.8 N/mm ± 2.7; P = .05), and suture anchor talus (6.6 N/mm ± 4.0; P = .04) repairs were significantly lower than that of the intact (12.4 N/mm ± 4.1 N/mm) ATFL group. The 3 repair groups were not significantly different from each other, but all 3 were substantially lower in strength and stiffness when compared to the intact ATFL. The use of suture anchors to repair the ATFL produces a repair that can withstand loads to failure similar to the suture-only Broström repair. However, all 3 repair groups were much weaker than

EURAMET.T-K7 Key Comparison of Water Triple-Point Cells

NASA Astrophysics Data System (ADS)

Peruzzi, A.; Bosma, R.; Kerkhof, O.; Rosenkranz, P.; Del Campo Maldonado, M. D.; Strnad, R.; Nielsen, J.; Anagnostou, M.; Veliki, T.; Zvizdic, D.; Grudnewicz, E.; Nedea, M.; Neagu, D. M.; Steur, P.; Filipe, E.; Lobo, I.; Antonsen, I.; Renaot, E.; Heinonen, M.; Weckstrom, T.; Bojkovski, J.; Turzo-Andras, E.; Nemeth, S.; White, M.; Tegeler, E.; Dobre, M.; Duris, S.; Kartal Dogan, A.; Uytun, A.; Augevicius, V.; Pauzha, A.; Pokhodun, A.; Simic, S.

2011-12-01

The results of a EURAMET key comparison of water triple-point cells (EURAMET.T-K7) are reported. The equipment used, the measuring conditions applied, and the procedures adopted for the water triple-point measurement at the participating laboratories are synthetically presented. The definitions of the national reference for the water triple-point temperature adopted by each laboratory are disclosed. The multiplicity of degrees of equivalence arising for the linking laboratories with respect to the "mother" comparison CCT-K7 is discussed in detail.

From Laser Scanning to Finite Element Analysis of Complex Buildings by Using a Semi-Automatic Procedure.

PubMed

Castellazzi, Giovanni; D'Altri, Antonio Maria; Bitelli, Gabriele; Selvaggi, Ilenia; Lambertini, Alessandro

2015-07-28

In this paper, a new semi-automatic procedure to transform three-dimensional point clouds of complex objects to three-dimensional finite element models is presented and validated. The procedure conceives of the point cloud as a stacking of point sections. The complexity of the clouds is arbitrary, since the procedure is designed for terrestrial laser scanner surveys applied to buildings with irregular geometry, such as historical buildings. The procedure aims at solving the problems connected to the generation of finite element models of these complex structures by constructing a fine discretized geometry with a reduced amount of time and ready to be used with structural analysis. If the starting clouds represent the inner and outer surfaces of the structure, the resulting finite element model will accurately capture the whole three-dimensional structure, producing a complex solid made by voxel elements. A comparison analysis with a CAD-based model is carried out on a historical building damaged by a seismic event. The results indicate that the proposed procedure is effective and obtains comparable models in a shorter time, with an increased level of automation.

Medicare patients' use of overpriced procedures before and after the Omnibus Budget Reconciliation Act of 1987.

PubMed Central

Escarce, J J

1993-01-01

OBJECTIVES. Under the Omnibus Budget Reconciliation Act of 1987, Medicare reduced physician fees for 12 procedures identified as overprices. This paper describes trends in the use of these procedures and other physician services by Medicare patients during the 4-year period surrounding the implementation of the 1987 budget act. METHODS. Medicare physician claims files were used to develop trends in physician-services use from 1986 to 1989. Services were grouped into four categories: overpriced procedures, other surgery, medical care, and ancillary tests. RESULTS. Growth in the volume of overpriced procedures slowed substantially after the 1987 budget act was implemented. Moreover, the reduction in the rate of volume growth for these procedures differed little among specialities or areas. In comparison, the rate of volume growth fell modestly for other surgery, was unchanged for medical care, and increased for ancillary tests. CONCLUSIONS. Increases do not necessarily occur in the volume of surgical procedures whose Medicare fees are reduced. Although the conclusions that may be drawn from a descriptive analysis are limited, these findings suggest that concerns that the resource-based Medicare fee schedule will lead to higher surgery rates may be unwarranted. PMID:8438971

3 dimensional cell cultures: a comparison between manually and automatically produced alginate beads.

PubMed

Lehmann, R; Gallert, C; Roddelkopf, T; Junginger, S; Wree, A; Thurow, K

2016-08-01

Cancer diseases are a common problem of the population caused by age and increased harmful environmental influences. Herein, new therapeutic strategies and compound screenings are necessary. The regular 2D cultivation has to be replaced by three dimensional cell culturing (3D) for better simulation of in vivo conditions. The 3D cultivation with alginate matrix is an appropriate method for encapsulate cells to form cancer constructs. The automated manufacturing of alginate beads might be an ultimate method for large-scaled manufacturing constructs similar to cancer tissue. The aim of this study was the integration of full automated systems for the production, cultivation and screening of 3D cell cultures. We compared the automated methods with the regular manual processes. Furthermore, we investigated the influence of antibiotics on these 3D cell culture systems. The alginate beads were formed by automated and manual procedures. The automated steps were processes by the Biomek(®) Cell Workstation (celisca, Rostock, Germany). The proliferation and toxicity were manually and automatically evaluated at day 14 and 35 of cultivation. The results visualized an accumulation and expansion of cell aggregates over the period of incubation. However, the proliferation and toxicity were faintly and partly significantly decreased on day 35 compared to day 14. The comparison of the manual and automated methods displayed similar results. We conclude that the manual production process could be replaced by the automation. Using automation, 3D cell cultures can be produced in industrial scale and improve the drug development and screening to treat serious illnesses like cancer.

Streamflow responses to road building and harvesting: A comparison with the equivalent clearcut area procedure

Treesearch

John G. King

1989-01-01

lncreases in annual streamflow and peak streamflows were determined on four small watersheds following timber harvesting and road building. The measured hydrologic changes are compared to those predicted by a methodology commonly used in the Forest Service's Northern Region, the equivalent clearcut area procedure. lncreases in peak streamflows are discussed with...

The Latarjet Procedure at the National Football League Scouting Combine: An Imaging and Performance Analysis.

PubMed

LeBus, George F; Chahla, Jorge; Sanchez, George; Akamefula, Ramesses; Moatshe, Gilbert; Phocas, Alexandra; Price, Mark D; Whalen, James M; LaPrade, Robert F; Provencher, Matthew T

2017-09-01

The Latarjet procedure is commonly performed in the setting of glenoid bone loss for treatment of recurrent anterior shoulder instability; however, little is known regarding the outcomes of this procedure in elite American football players. (1) Determine the prevalence, clinical features, and imaging findings of elite college football athletes who present to the National Football League (NFL) Combine with a previous Latarjet procedure and (2) describe these athletes' performance in the NFL in terms of draft status and initial playing time. Case series; Level of evidence, 4. After review of all football players who participated in the NFL Combine from 2009 to 2016, any player with a previous Latarjet procedure was included in this study. Medical records, position on the field, and draft position were recorded for each player. In addition, imaging studies were reviewed to determine fixation type, hardware complications, and status of the bone block. For those players who were ultimately drafted, performance was assessed based on games played and started, total snaps, and percentage of eligible snaps in which the player participated during his rookie season. Overall, 13 of 2617 (<1%) players at the combine were identified with a previous Latarjet procedure. Radiographically, 8 of 13 (61%) showed 2-screw fixation, while 5 of 13 (39%) had 1 screw. Of the 13 players, 6 (46%) players demonstrated hardware complications. All players had evidence of degenerative changes on plain radiographs, with 10 (77%) graded as mild, 1 (8%) as moderate, and 2 (15%) as severe according to the Samilson Prieto classification. Six of the 13 (46%) players went undrafted, while the remaining 7 (54%) were drafted; however, no player participated in more than half of the plays for which he was eligible during his rookie season. Only a small percentage of players at the NFL Combine (<1%) had undergone a Latarjet procedure. High rates of postoperative complications and radiographically confirmed

Postmining land use: economic comparison of forestry and pastureland alternatives

Treesearch

Charles H. Wolf

1980-01-01

The influence of soil properties, legal requirements, and economics on postmining land use is described, and enterprise budgets are prepared to demonstrate procedures for evaluating forest and pastureland alternatives. A comparison of cow-calf operations with hybrid poplar and black walnut plantations suggests that a combination of pastureland and black walnut...

Estimation of regions of attraction and ultimate boundedness for multiloop LQ regulators. [Linear Quadratic

NASA Technical Reports Server (NTRS)

Joshi, S. M.

1984-01-01

Closed-loop stability is investigated for multivariable linear time-invariant systems controlled by optimal full state feedback linear quadratic (LQ) regulators, with nonlinear gains present in the feedback channels. Estimates are obtained for the region of attraction when the nonlinearities escape the (0.5, infinity) sector in regions away from the origin and for the region of ultimate boundedness when the nonlinearities escape the sector near the origin. The expressions for these regions also provide methods for selecting the performance function parameters in order to obtain LQ designs with better tolerance for nonlinearities. The analytical results are illustrated by applying them to the problem of controlling the rigid-body pitch angle and elastic motion of a large, flexible space antenna.

Requirements for emergent neurosurgical procedures among patients undergoing neuroendovascular procedures in contemporary practice.

PubMed

Khatri, R; Ansar, M; Sultan, F; Chaudhry, S A; Khan, A A; Rodriguez, G J; Tummala, R P; Qureshi, A I

2012-03-01

Provisions for an emergent neurosurgical procedure have been a mandatory component of centers that perform neuroendovascular procedures. We sought to determine the need for emergent neurosurgical procedures following neuroendovascular interventions in 2 comprehensive stroke centers in settings with such provisions. Analysis of retrospectively collected data from procedure logs and patient charts was performed to identify patients who required immediate (before the termination of the intervention) or adjunctive (within 24 hours of the intervention) neurosurgical procedures related to a neuroendovascular intervention complication. The types of neurosurgical procedures and in-hospital outcomes of identified patients are reported as an aggregate and per endovascular procedure-type analyses. We reviewed a total of 933 neuroendovascular procedures performed during 3.5 years (2006-2010). A total of 759 intracranial procedures were performed. There was a need for emergent neurosurgical procedures in 8 patients (0.85% cumulative incidence and 1.05% for major intracranial procedures) (mean age, 46 years; 7 were women); the procedures were categorized as 3 immediate and 5 adjunctive procedures. There were 5 in-hospital deaths (62.5%) among these 8 patients. Neurosurgical procedures performed were external ventricular drainage placement in 6 (6 of 8, 75%) patients, decompressive craniectomy in 1 (12.5%) patient, and both surgical procedures in 1 (12.5%) patient. The need for emergent neurosurgical procedures is very low among patients undergoing intracranial neuroendovascular procedures. Survival in such patients despite emergent neurosurgical procedures is quite low.

Comparison of the Modified Broström Procedure for Chronic Lateral Ankle Instability With and Without Subfibular Ossicle.

PubMed

Ahn, Hyeon-Wook; Lee, Keun-Bae

2016-12-01

Subfibular ossicles are frequently found in patients with chronic lateral ankle instability (CLAI). However, there is a lack of consensus about the optimal surgical treatment for CLAI with subfibular ossicle. To evaluate the clinical and radiographic outcomes of the modified Broström procedure with subfibular ossicle excision compared with the same procedure for CLAI without subfibular ossicle. Cohort study; Level of evidence, 3. Ninety-six patients (96 ankles) treated with the modified Broström procedure using bone tunnel and suture anchor techniques for CLAI constituted the study cohort. The 96 ankles were divided into 2 groups with and without subfibular ossicles. The ossicle group (42 ankles) and nonossicle group (54 ankles) consisted of patients with a mean age of 26.6 and 30.3 years, respectively, at the time of surgery with a mean follow-up duration of 63.7 and 62.1 months, respectively. Subfibular ossicles were excised in the ossicle group. Mean Karlsson scores improved from 55.2 to 95.3 in the ossicle group and from 56.4 to 94.8 in the nonossicle group at final follow-up. Mean American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot scores also improved from 63.3 to 95.9 in the ossicle group and from 62.8 to 95.1 in the nonossicle group at final follow-up. Mean talar tilt angles were 14.0° in the ossicle group and 12.2° in the nonossicle group preoperatively and 7.6° and 6.8° at the final follow-up, respectively. Mean anterior talar translations in the ossicle group and nonossicle groups improved from 9.3 and 9.4 mm preoperatively to 5.8 and 5.7 mm at final follow-up, respectively. No significant differences were found between the 2 groups in terms of Karlsson score, AOFAS score, talar tilt angle, and anterior talar translation at final follow-up (P > .05). The modified Broström procedure with subfibular ossicle excision provided similarly good clinical and radiographic outcomes compared with the same procedure without subfibular ossicle

Application of advanced computational procedures for modeling solar-wind interactions with Venus: Theory and computer code

NASA Technical Reports Server (NTRS)

Stahara, S. S.; Klenke, D.; Trudinger, B. C.; Spreiter, J. R.

1980-01-01

Computational procedures are developed and applied to the prediction of solar wind interaction with nonmagnetic terrestrial planet atmospheres, with particular emphasis to Venus. The theoretical method is based on a single fluid, steady, dissipationless, magnetohydrodynamic continuum model, and is appropriate for the calculation of axisymmetric, supersonic, super-Alfvenic solar wind flow past terrestrial planets. The procedures, which consist of finite difference codes to determine the gasdynamic properties and a variety of special purpose codes to determine the frozen magnetic field, streamlines, contours, plots, etc. of the flow, are organized into one computational program. Theoretical results based upon these procedures are reported for a wide variety of solar wind conditions and ionopause obstacle shapes. Plasma and magnetic field comparisons in the ionosheath are also provided with actual spacecraft data obtained by the Pioneer Venus Orbiter.

Preschoolers' Person Description and Identification Accuracy: A Comparison of the Simultaneous and Elimination Lineup Procedures

ERIC Educational Resources Information Center

Pozzulo, Joanna D.; Dempsey, Julie; Crescini, Charmagne

2009-01-01

Preschoolers' (3- to 6-year-olds) person description and identification abilities were examined using the simultaneous and elimination lineup procedures. Participants (N = 100) were exposed to a 20-minute mask-making session conducted by a female confederate who acted as the mask-making teacher. After a brief delay (20 min), participants were…

Comparison of Anticipation and Study-Test Procedures of Paired-Associate Learning by Children. Final Report.

ERIC Educational Resources Information Center

Cole, Lawrence E.

The study paired-associate (PA) learning via the anticipation (ANT) and study-test (ST) procedures across second, third, fourth and fifth grades. Specifically, age differences in the rate of learning and examining PA learning according to the stage analyses were examined. Retention was also of interest: however, a ceiling effect negated the…

Evaluation of microarray data normalization procedures using spike-in experiments

PubMed Central

Rydén, Patrik; Andersson, Henrik; Landfors, Mattias; Näslund, Linda; Hartmanová, Blanka; Noppa, Laila; Sjöstedt, Anders

2006-01-01

Background Recently, a large number of methods for the analysis of microarray data have been proposed but there are few comparisons of their relative performances. By using so-called spike-in experiments, it is possible to characterize the analyzed data and thereby enable comparisons of different analysis methods. Results A spike-in experiment using eight in-house produced arrays was used to evaluate established and novel methods for filtration, background adjustment, scanning, channel adjustment, and censoring. The S-plus package EDMA, a stand-alone tool providing characterization of analyzed cDNA-microarray data obtained from spike-in experiments, was developed and used to evaluate 252 normalization methods. For all analyses, the sensitivities at low false positive rates were observed together with estimates of the overall bias and the standard deviation. In general, there was a trade-off between the ability of the analyses to identify differentially expressed genes (i.e. the analyses' sensitivities) and their ability to provide unbiased estimators of the desired ratios. Virtually all analysis underestimated the magnitude of the regulations; often less than 50% of the true regulations were observed. Moreover, the bias depended on the underlying mRNA-concentration; low concentration resulted in high bias. Many of the analyses had relatively low sensitivities, but analyses that used either the constrained model (i.e. a procedure that combines data from several scans) or partial filtration (a novel method for treating data from so-called not-found spots) had with few exceptions high sensitivities. These methods gave considerable higher sensitivities than some commonly used analysis methods. Conclusion The use of spike-in experiments is a powerful approach for evaluating microarray preprocessing procedures. Analyzed data are characterized by properties of the observed log-ratios and the analysis' ability to detect differentially expressed genes. If bias is not a

Quantifying the Diversity and Similarity of Surgical Procedures Among Hospitals and Anesthesia Providers.

PubMed

Dexter, Franklin; Ledolter, Johannes; Hindman, Bradley J

2016-01-01

In this Statistical Grand Rounds, we review methods for the analysis of the diversity of procedures among hospitals, the activities among anesthesia providers, etc. We apply multiple methods and consider their relative reliability and usefulness for perioperative applications, including calculations of SEs. We also review methods for comparing the similarity of procedures among hospitals, activities among anesthesia providers, etc. We again apply multiple methods and consider their relative reliability and usefulness for perioperative applications. The applications include strategic analyses (e.g., hospital marketing) and human resource analytics (e.g., comparisons among providers). Measures of diversity of procedures and activities (e.g., Herfindahl and Gini-Simpson index) are used for quantification of each facility (hospital) or anesthesia provider, one at a time. Diversity can be thought of as a summary measure. Thus, if the diversity of procedures for 48 hospitals is studied, the diversity (and its SE) is being calculated for each hospital. Likewise, the effective numbers of common procedures at each hospital can be calculated (e.g., by using the exponential of the Shannon index). Measures of similarity are pairwise assessments. Thus, if quantifying the similarity of procedures among cases with a break or handoff versus cases without a break or handoff, a similarity index represents a correlation coefficient. There are several different measures of similarity, and we compare their features and applicability for perioperative data. We rely extensively on sensitivity analyses to interpret observed values of the similarity index.

Social Media Ratings of Minimally Invasive Fat Reduction Procedures: Benchmarking Against Traditional Liposuction.

PubMed

Talasila, Sreya; Evers-Meltzer, Rachel; Xu, Shuai

2018-06-05

Minimally invasive fat reduction procedures are rapidly growing in popularity. Evaluate online patient reviews to inform practice management. Data from RealSelf.com, a popular online aesthetics platform, were reviewed for all minimally invasive fat reduction procedures. Reviews were also aggregated based on the primary method of action (e.g., laser, radiofrequency, ultrasound, etc.) and compared with liposuction. A chi-square test was used to assess for differences with the Marascuilo procedure for pairwise comparisons. A total of 13 minimally invasive fat reduction procedures were identified encompassing 11,871 total reviews. Liposuction had 4,645 total reviews and a 66% patient satisfaction rate. Minimally invasive fat reduction procedures had 7,170 aggregate reviews and a global patient satisfaction of 58%. Liposuction had statistically significantly higher patient satisfaction than cryolipolysis (55% satisfied, n = 2,707 reviews), laser therapies (61% satisfied, n = 3,565 reviews), and injectables (49% satisfied, n = 319 reviews) (p < .05). Injectables and cryolipolysis had statistically significantly lower patient satisfaction than radiofrequency therapies (63% satisfied, n = 314 reviews) and laser therapies. Ultrasound therapies had 275 reviews and a 73% patient satisfaction rate. A large number of patient reviews suggest that minimally invasive fat reduction procedures have high patient satisfaction, although liposuction still had the highest total patient satisfaction score. However, there are significant pitfalls in interpreting patient reviews, as they do not provide important data such as a patient's medical history or physician experience and skill.

Airborne hygrometer calibration inter-comparison against a metrological water vapour standard

NASA Astrophysics Data System (ADS)

Smorgon, Denis; Boese, Norbert; Ebert, Volker

2014-05-01

Water vapour is the most important atmospheric greenhouse gas, which causes a major feedback to warming and other changes in the climate system. Knowledge of the distribution of water vapour and its climate induced changes is especially important in the upper troposphere and lower stratosphere (UT/LS) where vapour plays a critical role in atmospheric radiative balance, cirrus cloud formation, and photochemistry. But, our understanding of water in the UT/LS is limited by significant uncertainties in current UT/LS water measurements. One of the most comprehensive inter-comparison campaigns for airborne hygrometers, termed AQUAVIT (AV1) [1], took place in 2007 at the AIDA chamber at the Karlsruhe Institute of Technology (KIT) in Germany. AV1 was a well-defined, referred, blind inter-comparison of 22 airborne field instruments from 17 international research groups. One major metrological deficit of AV1, however, was, that no traceable reference instrument participated in the inter-comparison experiments and that the calibration procedures of the participating instruments were not monitored or interrogated. Consequently a follow-up inter-comparison was organized in April 2013, which for the first time also provides a traceable link to the international humidity scale. This AQUAVIT2 (AV2) campaign (details see: http://www.imk-aaf.kit.edu/aquavit/index.php/Main_Page) was again located at KIT/AIDA and organised by an international organizing committee including KIT, PTB, FZJ and others. Generally AV2 is divided in two parallel comparisons: 1) AV2-A uses the AIDA chamber for a simultaneous comparison of all instruments (incl. sampling and in-situ instruments) over a broad range of conditions characteristic for the UT/LS; 2) AV2-B, about which this paper is reporting, is a sequential comparison of selected hygrometers and (when possible) their reference calibration infrastructures by means of a chilled mirror hygrometer traced back to the primary National humidity standard

Microbial Load in Septic and Aseptic Procedure Rooms.

PubMed

Harnoss, Julian-Camill; Assadian, Ojan; Diener, Markus Karl; Müller, Thomas; Baguhl, Romy; Dettenkofer, Markus; Scheerer, Lukas; Kohlmann, Thomas; Heidecke, Claus-Dieter; Gessner, Stephan; Büchler, Markus Wolfgang; Kramer, Axel

2017-07-10

Highly effective measures to prevent surgical wound infections have been established over the last two decades. We studied whether the strict separation of septic and aseptic procedure rooms is still necessary. In an exploratory, prospective observational study, the microbial concentration in an operating room without a room ventilating system (RVS) was analyzed during 16 septic and 14 aseptic operations with the aid of an air sampler (50 cm and 1 m from the operative field) and sedimentation plates (1 m from the operative field, and contact culture on the walls). The means and standard deviations of the microbial loads were compared with the aid of GEE models (generalized estimation equations). In the comparison of septic and aseptic operations, no relevant differences were found with respect to the overall microbial concentration in the room air (401.7 ± 176.3 versus 388.2 ± 178.3 CFU/m 3 ; p = 0.692 [CFU, colony-forming units]) or sedimentation 1 m from the operative field (45.3 ± 22.0 versus 48.7 ± 18.5 CFU/m 2 /min; p = 0.603) and on the walls (35.7 ± 43.7 versus 29.0 ± 49.4 CFU/m 2 /min; p = 0.685). The only relevant differences between the microbial spectra associated with the two types of procedure were a small amount of sedimentation of Escherichia coli and Enterococcus faecalis in septic operations, and of staphylococcus aureus and pseudomonas stutzeri in aseptic operations, up to 30 minutes after the end of the procedure. These data do not suggest that septic and aseptic procedure rooms need to be separated. In interpreting the findings, one should recall that the study was not planned as an equivalence or non-inferiority study. Wherever patient safety is concerned, high-level safety concepts should only be demoted to lower levels if new and convincing evidence becomes available.

Treatment of varicocele with reference to age: a retrospective comparison of three minimally invasive procedures.

PubMed

Beutner, S; May, M; Hoschke, B; Helke, C; Lein, M; Roigas, J; Johannsen, M

2007-01-01

This study investigated whether the therapeutic efficacy and morbidity of three minimally invasive techniques for varicocele correction--laparoscopic varicocelectomy (LV), antegrade sclerotherapy (AS), and retrograde embolization (RE)--differed between children and adults. During a 10-year period, 356 procedures for varicocele correction, including 122 cases of LV, 108 cases of AS, and 126 cases of RE, were performed for 314 patients at our institution. Of these patients, 223 were 19 years of age or younger (group 1), and 133 were older than 19 years (group 2). Diagnosis and postoperative results were established clinically and with the use of Doppler ultrasonography. The failure rates and complications for each procedure were retrospectively evaluated and compared between the two age groups. The median follow-up period was 69 months (range, 6-122 months). For 25 patients (19.8%), RE was not feasible for technical reasons. In both groups, LV had a lower failure rate than AS or RE, but the difference between LV and AS was not significant in group 1 (7.7(% vs 11.9%; p > 0.5). Also in group 1, AS was associated with fewer complications than LV 1 (4.5% vs 15.4%; p < 0.05). In group 2, LV was significantly more effective in correcting varicoceles than the other two techniques (p < 0.01). In this group, the complication rates for all three procedures did not differ significantly (p > 0.05). In our experience, LV was more effective than AS or RE in correcting varicoceles. For children and adolescents, AS may be more indicated because of the slightly lower complication rate and similar recurrence rates, as compared with LV, for this age group. The higher incidence of postoperative hydrocele formation after LV warrants more refined techniques such as the lymphatic-sparing approach.

Toxicity Minimized Cryoprotectant Addition and Removal Procedures for Adherent Endothelial Cells

PubMed Central

Davidson, Allyson Fry; Glasscock, Cameron; McClanahan, Danielle R.; Benson, James D.; Higgins, Adam Z.

2015-01-01

Ice-free cryopreservation, known as vitrification, is an appealing approach for banking of adherent cells and tissues because it prevents dissociation and morphological damage that may result from ice crystal formation. However, current vitrification methods are often limited by the cytotoxicity of the concentrated cryoprotective agent (CPA) solutions that are required to suppress ice formation. Recently, we described a mathematical strategy for identifying minimally toxic CPA equilibration procedures based on the minimization of a toxicity cost function. Here we provide direct experimental support for the feasibility of these methods when applied to adherent endothelial cells. We first developed a concentration- and temperature-dependent toxicity cost function by exposing the cells to a range of glycerol concentrations at 21°C and 37°C, and fitting the resulting viability data to a first order cell death model. This cost function was then numerically minimized in our state constrained optimization routine to determine addition and removal procedures for 17 molal (mol/kg water) glycerol solutions. Using these predicted optimal procedures, we obtained 81% recovery after exposure to vitrification solutions, as well as successful vitrification with the relatively slow cooling and warming rates of 50°C/min and 130°C/min. In comparison, conventional multistep CPA equilibration procedures resulted in much lower cell yields of about 10%. Our results demonstrate the potential for rational design of minimally toxic vitrification procedures and pave the way for extension of our optimization approach to other adherent cell types as well as more complex systems such as tissues and organs. PMID:26605546

Comparisons of Patient Demographics in Prospective Sports, Shoulder, and National Database Initiatives.

PubMed

Saltzman, Bryan M; Cvetanovich, Gregory L; Bohl, Daniel D; Cole, Brian J; Bach, Bernard R; Romeo, Anthony A

2016-09-01

There has been increased emphasis in orthopaedics on high-quality prospective research to provide evidence-based treatment guidelines, particularly in sports medicine/shoulder surgery. The external validity of these studies has not been established, and the generalizability of the results to clinical practice in the United States is unknown. Comparison of patient demographics in major prospective studies of arthroscopic sports and shoulder surgeries to patients undergoing the same procedures in the National Surgical Quality Improvement Program (NSQIP) database will show substantial differences to question the generalizability and external validity of those studies. Cross-sectional study; Level of evidence, 3. This study utilized patients undergoing arthroscopic anterior cruciate ligament reconstruction (ACLR), meniscectomy (MX), rotator cuff repair (RCR), and shoulder stabilization (SS) from the NSQIP database (2005-2013). Two prospective studies (either randomized controlled trials or, in 1 case, a major cohort study) were identified for each of the 4 procedures for comparison. Demographic variables available for comparison in both the identified prospective studies and the NSQIP included age, sex, and body mass index (BMI). From the NSQIP database, 5576 ACLR patients, 18,882 MX patients, 7282 RCR patients, and 993 SS patients were identified. The comparison clinical studies included cohort sizes as follows: ACLR, n = 121 and 2683; MX, n = 146 and 330; RCR, n = 90 and 103; SS, n = 88 and 196. Age differed significantly between the NSQIP and the patients in 6 of the 8 prospective clinical studies. Sex differed significantly between the NSQIP and the patients in 7 of the 8 prospective clinical studies. BMI differed significantly between the NSQIP and the patients of all 4 of the prospective clinical studies that reported this demographic variable. Significant differences exist for patient age, sex, and BMI between patients included in major sports medicine

Chloral hydrate as a sedating agent for neurodiagnostic procedures in children.

PubMed

Fong, Choong Yi; Tay, Chee Geap; Ong, Lai Choo; Lai, Nai Ming

2017-11-03

reporting. Evaluation of the efficacy of the sedative agents was also underpowered, with all the comparisons performed in single small studies.Children who received oral chloral hydrate had lower sedation failure when compared with oral promethazine (RR 0.11, 95% CI 0.01 to 0.82; 1 study, moderate-quality evidence). Children who received oral chloral hydrate had a higher risk of sedation failure after one dose compared to those who received intravenous pentobarbital (RR 4.33, 95% CI 1.35 to 13.89; 1 study, low-quality evidence), but after two doses there was no evidence of a significant difference between the two groups (RR 3.00, 95% CI 0.33 to 27.46; 1 study, very low-quality evidence). Children who received oral chloral hydrate appeared to have more sedation failure when compared with music therapy, but the quality of evidence was very low for this outcome (RR 17.00, 95% CI 2.37 to 122.14; 1 study). Sedation failure rates were similar between oral chloral hydrate, oral dexmedetomidine, oral hydroxyzine hydrochloride, and oral midazolam.Children who received oral chloral hydrate had a shorter time to achieve adequate sedation when compared with those who received oral dexmedetomidine (MD -3.86, 95% CI -5.12 to -2.6; 1 study, moderate-quality evidence), oral hydroxyzine hydrochloride (MD -7.5, 95% CI -7.85 to -7.15; 1 study, moderate-quality evidence), oral promethazine (MD -12.11, 95% CI -18.48 to -5.74; 1 study, moderate-quality evidence), and rectal midazolam (MD -95.70, 95% CI -114.51 to -76.89; 1 study). However, children with oral chloral hydrate took longer to achieve adequate sedation when compared with intravenous pentobarbital (MD 19, 95% CI 16.61 to 21.39; 1 study, low-quality evidence) and intranasal midazolam (MD 12.83, 95% CI 7.22 to 18.44; 1 study, moderate-quality evidence).No data were available to assess the proportion of children with successful completion of neurodiagnostic procedure without interruption by the child awakening. Most trials did not assess

"Compacted" procedures for adults' simple addition: A review and critique of the evidence.

PubMed

Chen, Yalin; Campbell, Jamie I D

2018-04-01

We review recent empirical findings and arguments proffered as evidence that educated adults solve elementary addition problems (3 + 2, 4 + 1) using so-called compacted procedures (e.g., unconscious, automatic counting); a conclusion that could have significant pedagogical implications. We begin with the large-sample experiment reported by Uittenhove, Thevenot and Barrouillet (2016, Cognition, 146, 289-303), which tested 90 adults on the 81 single-digit addition problems from 1 + 1 to 9 + 9. They identified the 12 very-small addition problems with different operands both ≤ 4 (e.g., 4 + 3) as a distinct subgroup of problems solved by unconscious, automatic counting: These items yielded a near-perfectly linear increase in answer response time (RT) yoked to the sum of the operands. Using the data reported in the article, however, we show that there are clear violations of the sum-counting model's predictions among the very-small addition problems, and that there is no real RT boundary associated with addends ≤4. Furthermore, we show that a well-known associative retrieval model of addition facts-the network interference theory (Campbell, 1995)-predicts the results observed for these problems with high precision. We also review the other types of evidence adduced for the compacted procedure theory of simple addition and conclude that these findings are unconvincing in their own right and only distantly consistent with automatic counting. We conclude that the cumulative evidence for fast compacted procedures for adults' simple addition does not justify revision of the long-standing assumption that direct memory retrieval is ultimately the most efficient process of simple addition for nonzero problems, let alone sufficient to recommend significant changes to basic addition pedagogy.

[Procedural learning disorder: neuropsychological characteristics].

PubMed

Crespo-Eguílaz, N; Narbona, J

This research aims at neurocognitive delineation of the core features of procedural learning disorder (PLD), otherwise labeled as motor coordination disorder or non-verbal learning disorder. A sample of 209 correlative outpatients (73% males), aged 6-12 years, all of them having QI ranging from 81 to 120, was clustered into the following neurobehavioural groups: PLD (n = 16), PLD plus attention deficit hyperactivity disorder (ADHD) (n = 37), ADHD combined type (n = 47), ADHD predominantly inattentive type (n = 23), specific language impairment (n = 68), and semantic-pragmatic language impairment (n = 18). Two additional groups of patients were included for some comparisons: children with periventricular leukomalacia (PVL) without learning disability (n = 8) or associating PLD (n = 17). A set of behavioural scales and neurocognitive tests was used to evaluate verbal and non-verbal IQ, attention, impulsivity control, visuo-motor coordination, declarative memory, procedural memory and learning, formal and functional dimensions of language, peer relationships and academic achievement. Parametric analysis were used to test the differences and similarities of neurobehavioural variables between groups. Our results allow us to conclude that PLD implies a difficult acquisition of automatized motor, cognitive and communicative abilities required in school work and peer social relationships. PLD is different from autistic spectrum disorders. It is frequently associated to inattentive ADHD. Operational criteria for diagnosis of PLD are proposed, according to our results. A bilateral posterior parietal dysfunction is a plausible explanation of its physiopathology. Preserved general intelligence and formal linguistic abilities are the clues for intervention designs.

Comparison of quality of life between two biliary drainage procedures in laparoscopic common bile duct exploration.

PubMed

Xin, Ying; Zhu, Xin; Wei, Qi; Cai, Xiujun; Wang, Xianfa; Huang, Diyu

2007-03-01

With various kinds of minimal access surgery being introduced, quality of life must be considered as a measure of whether minimal access surgery is good or not. We evaluate the difference in quality of life using two kinds of biliary drainage procedures in laparoscopic common bile duct exploration. Forty cases of laparoscopic common bile duct exploration with cholecystectomy were studied to compare gastrointestinal quality of life index (GIQLI) preoperatively and postoperatively at two, five and sixteen weeks in two groups using different biliary drainage procedures. There was no preoperative GIQLI difference between the two groups. Cases with biliary drainage through the cystic duct achieved earlier recovery. GIQLI of all cases reached normal sixteen weeks postoperatively. Biliary drainage through the cystic duct in laparoscopic common bile duct exploration may help to improve the postoperative GIQLI in patients.

Results of the first provisional technical secretariat interlaboratory comparison test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stuff, J.R.; Hoffland, L.

1995-06-01

The principal task of this laboratory in the first Provisional Technical Secretariat (PTS) Interlaboratory Comparison Test was to verify and test the extraction and preparation procedures outlined in the Recommended Operating Procedures for Sampling and Analysis in the Verification of Chemical Disarmament in addition to our laboratory extraction methods and our laboratory analysis methods. Sample preparation began on 16 May 1994 and analysis was completed on 12 June 1994. The analytical methods used included NMR ({sup 1}H and {sup 31}P) GC/AED, GC/MS (EI and methane CI), GC/IRD, HPLC/IC, HPLC/TSP/MS, MS/MS(Electrospray), and CZE.

Main clinical, therapeutic and technical factors related to patient's maximum skin dose in interventional cardiology procedures

PubMed Central

Journy, N; Sinno-Tellier, S; Maccia, C; Le Tertre, A; Pirard, P; Pagès, P; Eilstein, D; Donadieu, J; Bar, O

2012-01-01

Objective The study aimed to characterise the factors related to the X-ray dose delivered to the patient's skin during interventional cardiology procedures. Methods We studied 177 coronary angiographies (CAs) and/or percutaneous transluminal coronary angioplasties (PTCAs) carried out in a French clinic on the same radiography table. The clinical and therapeutic characteristics, and the technical parameters of the procedures, were collected. The dose area product (DAP) and the maximum skin dose (MSD) were measured by an ionisation chamber (Diamentor; Philips, Amsterdam, The Netherlands) and radiosensitive film (Gafchromic; International Specialty Products Advanced Materials Group, Wayne, NJ). Multivariate analyses were used to assess the effects of the factors of interest on dose. Results The mean MSD and DAP were respectively 389 mGy and 65 Gy cm−2 for CAs, and 916 mGy and 69 Gy cm−2 for PTCAs. For 8% of the procedures, the MSD exceeded 2 Gy. Although a linear relationship between the MSD and the DAP was observed for CAs (r=0.93), a simple extrapolation of such a model to PTCAs would lead to an inadequate assessment of the risk, especially for the highest dose values. For PTCAs, the body mass index, the therapeutic complexity, the fluoroscopy time and the number of cine frames were independent explanatory factors of the MSD, whoever the practitioner was. Moreover, the effect of technical factors such as collimation, cinematography settings and X-ray tube orientations on the DAP was shown. Conclusion Optimising the technical options for interventional procedures and training staff on radiation protection might notably reduce the dose and ultimately avoid patient skin lesions. PMID:22457404

Nanosheets of oxides and hydroxides: Ultimate 2D charge-bearing functional crystallites.

PubMed

Ma, Renzhi; Sasaki, Takayoshi

2010-12-01

A wide variety of cation-exchangeable layered transition metal oxides and their relatively rare counterparts, anion-exchangeable layered hydroxides, have been exfoliated into individual host layers, i.e., nanosheets. Exfoliation is generally achieved via a high degree of swelling, typically driven either by intercalation of bulky organic ions (quaternary ammonium cations, propylammonium cations, etc.) for the layered oxides or by solvation with organic solvents (formamide, butanol, etc.) for the hydroxides. Ultimate two-dimensional (2D) anisotropy for the nanosheets, with thickness of around one nanometer versus lateral size ranging from submicrometer to several tens of micrometers, allows them to serve either as an ideal quantum system for fundamental study or as a basic building block for functional assembly. The charge-bearing inorganic macromolecule-like nanosheets can be assembled or organized through various solution-based processing techniques (e.g., flocculation, electrostatic sequential deposition, or the Langmuir-Blodgett method) to produce a range of nanocomposites, multilayer nanofilms, and core-shell nanoarchitectures, which have great potential for electronic, magnetic, optical, photochemical, and catalytic applications.

The ultimate question of origins: God and the beginning of the Universe.

NASA Astrophysics Data System (ADS)

Craig, W. L.

Both cosmology and philosophy trace their roots to the wonder felt by the ancient Greeks as they contemplated the Universe. The ultimate question remains why the Universe exists rather than nothing. This question led Leibniz to postulate the existence of a metaphysically necessary being, which he identified as God. Leibniz's critics, however, disputed this identification, claiming that the space-time universe itself may be the metaphysically necessary being. The discovery during this century that the Universe began to exist, however, calls into question the Universe's status as metaphysically necessary, since any necessary being must be eternal in its existence. Although various cosmogonic models claiming to avert the beginning of the Universe predicted by the standard model have been and continue to be offered, no model involving an eternal universe has proved as plausible as the standard model. Unless we are to assert that the Universe simply sprang into being uncaused out of nothing, we are thus led to Leibniz's conclusion. Several objections to inferring a supernatural cause of the origin of the Universe are considered and found to be unsound.

The Ultimate Question of Origins: God and the Beginning of the Universe

NASA Astrophysics Data System (ADS)

Craig, William Lane

1999-12-01

Both cosmology and philosophy trace their roots to the wonder felt by the ancient Greeks as they contemplated the universe. The ultimate question remains why the universe exists rather than nothing. This question led Leibniz to postulate the existence of a metaphysically necessary being, which he identified as God. Leibniz's critics, however, disputed this identification, claiming that the space-time universe itself may be the metaphysically necessary being. The discovery during this century that the universe began to exist, however, calls into question the universe's status as metaphysically necessary, since any necessary being must be eternal in its existence. Although various cosmogonic models claiming to avert the beginning of the universe predicted by the standard model have been and continue to be offered, no model involving an eternal universe has proved as plausible as the standard model. Unless we are to assert that the universe simply sprang into being uncaused out of nothing, we are thus led to Leibniz's conclusion. Several objections to inferring a supernatural cause of the origin of the universe are considered and found to be unsound.

The ultimate limits of the relativistic rocket equation. The Planck photon rocket

NASA Astrophysics Data System (ADS)

Haug, Espen Gaarder

2017-07-01

In this paper we look at the ultimate limits of a photon propulsion rocket. The maximum velocity for a photon propulsion rocket is just below the speed of light and is a function of the reduced Compton wavelength of the heaviest subatomic particles in the rocket. We are basically combining the relativistic rocket equation with Haug's new insight on the maximum velocity for anything with rest mass. An interesting new finding is that in order to accelerate any subatomic "fundamental" particle to its maximum velocity, the particle rocket basically needs two Planck masses of initial load. This might sound illogical until one understands that subatomic particles with different masses have different maximum velocities. This can be generalized to large rockets and gives us the maximum theoretical velocity of a fully-efficient and ideal rocket. Further, no additional fuel is needed to accelerate a Planck mass particle to its maximum velocity; this also might sound absurd, but it has a very simple and logical solution that is explained in this paper.

Dose-dependent effects of an immune challenge at both ultimate and proximate levels in Drosophila melanogaster.

PubMed

Nystrand, M; Dowling, D K

2014-05-01

Immune responses are highly dynamic. The magnitude and efficiency of an immune response to a pathogen can change markedly across individuals, and such changes may be influenced by variance in a range of intrinsic (e.g. age, genotype, sex) and external (e.g. abiotic stress, pathogen identity, strain) factors. Life history theory predicts that up-regulation of the immune system will come at a physiological cost, and studies have confirmed that increased investment in immunity can reduce reproductive output and survival. Furthermore, males and females often have divergent reproductive strategies, and this might drive the evolution of sex-specific life history trade-offs involving immunity, and sexual dimorphism in immune responses per se. Here, we employ an experiment design to elucidate dose-dependent and sex-specific responses to exposure to a nonpathogenic immune elicitor at two scales--the 'ultimate' life history and the underlying 'proximate' immune level in Drosophila melanogaster. We found dose-dependent effects of immune challenges on both male and female components of reproductive success, but not on survival, as well as a response in antimicrobial activity. These results indicate that even in the absence of the direct pathogenic effects that are associated with actual disease, individual life histories respond to a perceived immune challenge--but with the magnitude of this response being contingent on the initial dose of exposure. Furthermore, the results indicate that immune responses at the ultimate life history level may indeed reflect underlying processes that occur at the proximate level. © 2014 The Authors. Journal of Evolutionary Biology © 2014 European Society For Evolutionary Biology.

Degassing procedure for ultrahigh vacuum

NASA Technical Reports Server (NTRS)

Moore, B. C.

1979-01-01

Calculations based on diffusion coefficients and degassing rates for stainless-steel vacuum chambers indicate that baking at lower temperatures for longer periods give lower ultimate pressures than rapid baking at high temperatures. Process could reduce pressures in chambers for particle accelerators, fusion reactors, material research, and other applications.

Longitudinal trends with Improvement in Quality of Life after TVT, TVT O and Burch Colposuspension Procedures

PubMed Central

Drahoradova, Petra; Martan, Alois; Svabik, Kamil; Zvara, Karel; Otava, Martin; Masata, Jaromir

2011-01-01

Summary Background Comparison of the quality of life (QoL) trends after TVT, TVT O and Burch colposuspension (BCS) procedures and comparison of long-term subjective and objective outcomes. Material/Methods The study included 215 women who underwent a TVT, TVT O or BCS procedure. We monitored QoL after each procedure and the effect of complications on the QoL as assessed by the IQOL questionnaire over a 3-year period. Results The study was completed by 74.5% of women after TVT, 74.5% after TVT O, and 65.2% after BCS procedure. In the long-term, the QoL improved from 46.9 to 88.7 and remained stable after BCS; after TVT and TVT O, it declined, but only after TVT O was the decline statistically significant compared to BCS. The IQOL for women with post-operative complications has a clear descending tendency. The effect of the complications is highly significant (p<0.001). Only the OAB complication had a statistically significant effect on QoL p<0.001. Preexistent OAB does not negatively affect postoperative results of anti-incontinence surgery. Conclusions There was a statistically significant decline with the longitudinal values of IQOL with TVT O, but not with TVT or BCS. Anti-incontinence operations significantly improve quality of life for women with MI, but compared to the SI group, the quality of life is worse when measured at a longer time interval after the operation. Anti-incontinence operations significantly improve quality of life, and the difference in preoperative status in the long-term follow-up is demonstrable. PMID:21278690

Comparison of Four Skin Decontamination Procedures Using Reactive Skin Decontamination Lotion (RSDL) Following Cutaneous VX Exposure in Guinea Pigs

DTIC Science & Technology

2016-01-01

DC) product following cutaneous exposure to VX was affected by the DC procedure. Fur-clipped, male, unanesthetized guinea pigs were used as subjects...RSDL) Following Cutaneous VX Exposure in Guinea Pigs Irwin Koplovitz Susan Schulz Julia Morgan Robert Reed Edward Clarkson C. Gary Hurst...Decontamination Procedures Using Reactive Skin 5a. CONTRACT NUMBER Decontamination Lotion (RSDL) Following Cutaneous VX Exposure in Guinea Pigs 5b

Evaluation of routine depopulation, cleaning, and disinfection procedures in the live bird markets, New York.

PubMed

Trock, Susan C; Gaeta, Michelle; Gonzalez, Annette; Pederson, Janice C; Senne, Dennis A

2008-03-01

During the past years surveillance for avian influenza has been conducted in the live bird markets (LBMs) in New York as well as other states along the east coast. Repeated attempts to eradicate H5 and H7 influenza from the New York markets have focused efforts on the LBMs themselves. Despite repeated mandatory market closures accompanied by cleaning and disinfecting (C/D) procedures, avian influenza virus continued to be isolated. In an effort to assess the adequacy of the C/D procedure, samples were collected in temporal proximity to the depopulation and C/D. Comparison of the pre-C/D (83% virus positive), at C/D approval (1.6% positive) and post-C/D testing (33% positive) indicate that the current procedures of C/D can be effective at eliminating these influenza viruses. However, reinfection via introduction of influenza-virus-positive birds can occur shortly after the market reopens.

Verification approach for the Shuttle/Payload Contamination Evaluation computer program - Spacelab induced environment

NASA Technical Reports Server (NTRS)

Bareiss, L. E.

1978-01-01

The paper presents a compilation of the results of a systems level Shuttle/payload contamination analysis and related computer modeling activities. The current technical assessment of the contamination problems anticipated during the Spacelab program are discussed and recommendations are presented on contamination abatement designs and operational procedures based on experience gained in the field of contamination analysis and assessment, dating back to the pre-Skylab era. The ultimate test of the Shuttle/Payload Contamination Evaluation program will be through comparison of predictions with measured levels of contamination during actual flight.

Comparison of 2015 Medicare relative value units for gender-specific procedures: Gynecologic and gynecologic-oncologic versus urologic CPT coding. Has time healed gender-worth?

PubMed

Benoit, M F; Ma, J F; Upperman, B A

2017-02-01

In 1992, Congress implemented a relative value unit (RVU) payment system to set reimbursement for all procedures covered by Medicare. In 1997, data supported that a significant gender bias existed in reimbursement for gynecologic compared to urologic procedures. The present study was performed to compare work and total RVU's for gender specific procedures effective January 2015 and to evaluate if time has healed the gender-based RVU worth. Using the 2015 CPT codes, we compared work and total RVU's for 50 pairs of gender specific procedures. We also evaluated 2015 procedure related provider compensation. The groups were matched so that the procedures were anatomically similar. We also compared 2015 to 1997 RVU and fee schedules. Evaluation of work RVU's for the paired procedures revealed that in 36 cases (72%), male vs female procedures had a higher wRVU and tRVU. For total fee/reimbursement, 42 (84%) male based procedures were compensated at a higher rate than the paired female procedures. On average, male specific surgeries were reimbursed at an amount that was 27.67% higher for male procedures than for female-specific surgeries. Female procedure based work RVU's have increased minimally from 1997 to 2015. Time and effort have trended towards resolution of some gender-related procedure worth discrepancies but there are still significant RVU and compensation differences that should be further reviewed and modified as surgical time and effort highly correlate. Copyright © 2016. Published by Elsevier Inc.

A prospective comparison of procedural sedation and ultrasound-guided interscalene nerve block for shoulder reduction in the emergency department.

PubMed

Blaivas, Michael; Adhikari, Srikar; Lander, Lina

2011-09-01

Emergency physicians (EPs) are beginning to use ultrasound (US) guidance to perform regional nerve blocks. The primary objective of this study was to compare length of stay (LOS) in patients randomized to US-guided interscalene block or procedural sedation to facilitate reduction of shoulder dislocation in the emergency department (ED). The secondary objectives were to compare one-on-one health care provider time, pain experienced by the patient during reduction, and patient satisfaction between the two groups. This was a prospective, randomized study of patients presenting to the ED with shoulder dislocation. The study was conducted at an academic Level I trauma center ED with an annual census of approximately 80,000. Patients were eligible for the study if they were at least 18 years of age and required reduction of a shoulder dislocation. A convenience sample of patients was randomized to either traditional procedural sedation or US-guided interscalene nerve block. Procedural sedation was performed with etomidate as the sole agent. Interscalene blocks were performed by hospital-credentialed EPs using sterile technique and a SonoSite MicroMaxx US machine with a high-frequency linear array transducer. Categorical variables were evaluated using Fisher's exact test, and continuous variables were analyzed using the Wilcoxon rank sum test. Forty-two patients were enrolled, with 21 patients randomized to each group. The groups were not significantly different with respect to sex or age. The mean (±SD) LOS in the ED was significantly higher in the procedural sedation group (177.3 ± 37.9 min) than in the US-guided interscalene block group (100.3 ± 28.2 minutes; p < 0.0001). The mean (±SD) one-on-one health care provider time was 47.1 (±9.8) minutes for the sedation group and 5 (±0.7) minutes for the US-guided interscalene block group (p < 0.0001). There was no statistically significant difference between the two groups in patient satisfaction or pain experienced

Effect of Deep Drying and Torrefaction Temperature on Proximate, Ultimate Composition, and Heating Value of 2-mm Lodgepole Pine (Pinus contorta) Grind

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tumuluru, Jaya

Deep drying and torrefaction is a thermal pretreatment method, where biomass is heated in the temperature range of 150–300°C in an inert or reduced environment. The process parameters like temperature and residence time has a significant impact on proximate, ultimate, and energy properties of the biomass. In the present study, torrrefaction experiments were conducted on 2 mm lodgepole pine grind using a thermogravimetric analyzer. Both deep drying and torrefaction temperature (160–270°C) and time (15–120 min) were selected. Torrefied samples were analyzed for proximate, ultimate and energy properties. Results indicated that moisture content decreased with increases in torrefaction temperature and time,more » where at 270°C and 120 min, the moisture content was found to be 1.15% (w.b.). Volatile content in the biomass decreased from about 80% to about 45%, and ash content increased from 0.77 to about 1.91% at 270°C and 120 min. The hydrogen, oxygen and sulfur content decreased to 3%, 28.24%, and 0.01 whereas carbon content and higher heating value increased to 68.86% and 23.67 MJ/kg at 270°C and 120 min. H/C and O/C ratio calculated at 270°C and 120 min residence time were about 0.56 and 0.47. This study indicated that higher torrefaction temperatures >230°C and residence time >15 min influenced the proximate, ultimate, and energy properties.« less

26 CFR 48.6421-2 - Credits or payments to ultimate purchasers of gasoline used in intercity, local, or school buses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... gasoline used in intercity, local, or school buses. 48.6421-2 Section 48.6421-2 Internal Revenue INTERNAL... Manufacturers Taxes § 48.6421-2 Credits or payments to ultimate purchasers of gasoline used in intercity, local, or school buses. (a) In general. If gasoline is used in an intercity or local bus while engaged in...

26 CFR 48.6421-2 - Credits or payments to ultimate purchasers of gasoline used in intercity, local, or school buses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... gasoline used in intercity, local, or school buses. 48.6421-2 Section 48.6421-2 Internal Revenue INTERNAL... Manufacturers Taxes § 48.6421-2 Credits or payments to ultimate purchasers of gasoline used in intercity, local, or school buses. (a) In general. If gasoline is used in an intercity or local bus while engaged in...

26 CFR 48.6421-2 - Credits or payments to ultimate purchasers of gasoline used in intercity, local, or school buses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... gasoline used in intercity, local, or school buses. 48.6421-2 Section 48.6421-2 Internal Revenue INTERNAL... Manufacturers Taxes § 48.6421-2 Credits or payments to ultimate purchasers of gasoline used in intercity, local, or school buses. (a) In general. If gasoline is used in an intercity or local bus while engaged in...