Deformation associated to exhumation of serpentinized mantle rocks in a fossil Ocean Continent Transition: The Totalp unit in SE Switzerland

NASA Astrophysics Data System (ADS)

Picazo, S.; Manatschal, G.; Cannat, M.; Andréani, M.

2013-08-01

Although the exhumation of ultramafic rocks in slow and ultraslow spreading Mid-Ocean Ridges and Ocean Continent Transitions (OCTs) has been extensively investigated, the deformation processes related to mantle exhumation are poorly constrained. In this paper we present a new geological map and a section across the exhumed serpentinized peridotites of the Totalp unit near Davos (SE Switzerland), and we propose that the Totalp unit is formed by two Alpine thrust sheets. Geological mapping indicates local exposure of a paleo-seafloor that is formed by an exhumed detachment surface and serpentinized peridotites. The top of the exhumed mantle rocks is made of ophicalcites that resulted from the carbonation of serpentine under static conditions at the seafloor. The ophicalcites preserve depositional contacts with Upper Jurassic to Lower Cretaceous pelagic sediments (Bernoulli and Weissert, 1985). These sequences did not exceed prehnite-pumpellyite metamorphic facies conditions, and locally escaped Alpine deformation. Thin mylonitic shear zones as well as foliated amphibole-bearing ultramafic rocks have been mapped. The age of these rocks and the link with the final exhumation history are yet unknown but since amphibole-bearing ultramafic rocks can be found as clasts in cataclasites related to the detachment fault, they pre-date detachment faulting. Our petrostructural study of the exhumed serpentinized rocks also reveals a deformation gradient from cataclasis to gouge formation within 150 m in the footwall of the proposed paleo-detachment fault. This deformation postdates serpentinization. It involves a component of plastic deformation of serpentine in the most highly strained intervals that has suffered pronounced grain-size reduction and a polyphase cataclastic overprint.

Gravity-induced stresses in stratified rock masses

USGS Publications Warehouse

Amadei, B.; Swolfs, H.S.; Savage, W.Z.

1988-01-01

This paper presents closed-form solutions for the stress field induced by gravity in anisotropic and stratified rock masses. These rocks are assumed to be laterally restrained. The rock mass consists of finite mechanical units, each unit being modeled as a homogeneous, transversely isotropic or isotropic linearly elastic material. The following results are found. The nature of the gravity induced stress field in a stratified rock mass depends on the elastic properties of each rock unit and how these properties vary with depth. It is thermodynamically admissible for the induced horizontal stress component in a given stratified rock mass to exceed the vertical stress component in certain units and to be smaller in other units; this is not possible for the classical unstratified isotropic solution. Examples are presented to explore the nature of the gravity induced stress field in stratified rock masses. It is found that a decrease in rock mass anisotropy and a stiffening of rock masses with depth can generate stress distributions comparable to empirical hyperbolic distributions previously proposed in the literature. ?? 1988 Springer-Verlag.

Contamination in fractured-rock aquifers: Research at the former Naval Air Warfare Center, West Trenton, New Jersey

USGS Publications Warehouse

Goode, Daniel J.; Tiedeman, Claire; Lacombe, Pierre J.; Imbrigiotta, Thomas E.; Shapiro, Allen M.; Chapelle, Francis H.

2007-01-01

The U.S. Geological Survey and cooperators are studying chlorinated solvents in a fractured sedimentary rock aquifer underlying the former Naval Air Warfare Center (NAWC), West Trenton, New Jersey. Fractured-rock aquifers are common in many parts of the United States and are highly susceptible to contamination, particularly at industrial sites. Compared to 'unconsolidated' aquifers, there can be much more uncertainty about the direction and rate of contaminant migration and about the processes and factors that control chemical and microbial transformations of contaminants. Research at the NAWC is improving understanding of the transport and fate of chlorinated solvents in fractured-rock aquifers and will compare the effectiveness of different strategies for contaminant remediation.

Hydrologic properties and ground-water flow systems of the Paleozoic rocks in the upper Colorado River basin in Arizona, Colorado, New Mexico, Utah, and Wyoming, excluding the San Juan Basin

USGS Publications Warehouse

Geldon, Arthur L.

2003-01-01

The hydrologic properties and ground-water flow systems of Paleozoic sedimentary rocks in the Upper Colorado River Basin were investigated under the Regional Aquifer-System Analysis (RASA) program of the U.S. Geological Survey in anticipation of the development of water supplies from bedrock aquifers to fulfill the region's growing water demands. The study area, in parts of Arizona, Colorado, New Mexico, Utah, and Wyoming, covers about 100,000 square miles. It includes parts of four physiographic provinces--the Middle Rocky Mountains, Wyoming Basin, Southern Rocky Mountains, and Colorado Plateaus. A variety of landforms, including mountains, plateaus, mesas, cuestas, plains, badlands, and canyons, are present. Altitudes range from 3,100 to 14,500 feet. Precipitation is distributed orographically and ranges from less than 6 inches per year at lower altitudes to more than 60 inches per year in some mountainous areas. Most of the infrequent precipitation at altitudes of less than 6,000 feet is consumed by evapotranspiration. The Colorado and Green Rivers are the principal streams: the 1964-82 average discharge of the Colorado River where it leaves the Upper Colorado River Basin is 12,170 cubic feet per second (a decrease of 5,680 cubic feet per second since construction of Glen Canyon Dam in 1963). On the basis of their predominant lithologic and hydrologic properties, the Paleozoic rocks are classified into four aquifers and three confining units. The Flathead aquifer, Gros Ventre confining unit, Bighorn aquifer, Elbert-Parting confining unit, and Madison aquifer (Redwall-Leadville and Darwin-Humbug zones) make up the Four Corners aquifer system. A thick sequence, composed mostly of Mississippian and Pennsylvanian shale, anhydrite, halite, and carbonate rocks--the Four Corners confining unit (Belden-Molas and Paradox-Eagle Valley subunits)--overlies the Four Corners aquifer system in most areas and inhibits vertical ground-water flow between the Four Corners aquifer system and the overlying Canyonlands aquifer. Composed of the uppermost Paleozoic rocks, the Canyonlands aquifer consists, in ascending order, of the Cutler-Maroon, Weber-De Chelly, and Park City-State Bridge zones. The Paleozoic rocks are underlain by a basal confining unit consisting of Precambrian sedimentary, igneous, and metamorphic rocks and overlain throughout most of the Upper Colorado River Basin by the Chinle-Moenkopi confining unit, which consists of Triassic formations composed mostly of shale. The largest values of porosity, permeability, hydraulic conductivity, transmissivity, and artesian yield are exhibited by the Redwall-Leadville zone of the Madison aquifer and the Weber-De Chelly zone of the Canyonlands aquifer. The former consists almost entirely of Devonian and Mississippian carbonate rocks: the latter consists mostly of Pennsylvanian and Permian quartz sandstone. Unit-averaged porosity in hydrogeologic units composed of Paleozoic rocks ranges from less than 1 to 28 percent. Permeability ranges from less than 0.0001 to 3,460 millidarcies. Unit-averaged hydraulic conductivity ranges from 0.000005 to 200 feet per day. The composite transmissivity of Paleozoic rocks ranges from 0.0005 to 47,000 feet squared per day. Artesian yields to wells and springs (excluding atypical springflows) from these hydrogeologic units range from less than 1 to 10,000 gallons per minute. The permeability and watersupply capabilities of all hydrogeologic units progressively decrease from uplifted areas to structural basins. Recharge to the Paleozoic rocks is provided by direct infiltration of precipitation, leakage from streams, and ground-water inflows from structurally continuous areas west and north of the Upper Colorado River Basin. The total recharge available flom ground-water systems in the basin from direct precipitation and stream leakage is estimated to be 6,600,000 acre-feet per year. However, little of this recharge directly enters the Paleozoic rocks

Rocks.

ERIC Educational Resources Information Center

Lee, Alice

This science unit is designed for limited- and non-English speaking students in a Chinese bilingual education program. The unit covers rock material, classification, characteristics of types of rocks, and rock cycles. It is written in Chinese and simple English. At the end of the unit there is a list of main terms in both English and Chinese, and…

Uranium migration and favourable sites of potential radioelement concentrations in Gabal Umm Hammad area, Central Eastern Desert, Egypt

NASA Astrophysics Data System (ADS)

Youssef, Mohamed A. S.; Sabra, Mohamed Elsadek M.; Abdeldayem, Abdelaziz L.; Masoud, Alaa A.; Mansour, Salah A.

2017-12-01

Airborne gamma-ray spectrometric data, covering Gabal Umm Hammad area, near Quseir City, in the Eastern Desert of Egypt, has been utilized to identify the uranium migration path, and U, Th and K-favorability indices. The following of the uranium migration technique enabled estimation of the amount of migrated uranium, in and out of the rock units. Investigation of the Taref Formation, Nakhil Formation, Tarawan Formation and Dawi Formation shows large negative amount of uranium migration, indicating that uranium leaching is outward from the geologic body toward surrounding rock units. Moreover, calculation of the U, Th and K-favorability indices has been carried out for the various rock units to locate the rocks having the highest radioelement potentialities. The rock units that possess relatively major probability of uranium potentiality include Mu‧tiq Group, weakly deformed granitic rocks, and Trachyte plugs and sheets. Meanwhile, the rock units with major potential of Th-index are Taref Formation, Quseir Formation and Dawi Formation. The rock units with major potential of K-index are Dokhan volcanic and Mu‧tiq group.

Cuttability Assessment of Selected Rocks Through Different Brittleness Values

NASA Astrophysics Data System (ADS)

Dursun, Arif Emre; Gokay, M. Kemal

2016-04-01

Prediction of cuttability is a critical issue for successful execution of tunnel or mining excavation projects. Rock cuttability is also used to determine specific energy, which is defined as the work done by the cutting force to excavate a unit volume of yield. Specific energy is a meaningful inverse measure of cutting efficiency, since it simply states how much energy must be expended to excavate a unit volume of rock. Brittleness is a fundamental rock property and applied in drilling and rock excavation. Brittleness is one of the most crucial rock features for rock excavation. For this reason, determination of relations between cuttability and brittleness will help rock engineers. This study aims to estimate the specific energy from different brittleness values of rocks by means of simple and multiple regression analyses. In this study, rock cutting, rock property, and brittleness index tests were carried out on 24 different rock samples with different strength values, including marble, travertine, and tuff, collected from sites around Konya Province, Turkey. Four previously used brittleness concepts were evaluated in this study, denoted as B 1 (ratio of compressive to tensile strength), B 2 (ratio of the difference between compressive and tensile strength to the sum of compressive and tensile strength), B 3 (area under the stress-strain line in relation to compressive and tensile strength), and B 9 = S 20, the percentage of fines (<11.2 mm) formed in an impact test for the Norwegian University of Science and Technology (NTNU) model as well as B 9p (B 9 as predicted from uniaxial compressive, Brazilian tensile, and point load strengths of rocks using multiple regression analysis). The results suggest that the proposed simple regression-based prediction models including B 3, B 9, and B 9p outperform the other models including B 1 and B 2 and can be used for more accurate and reliable estimation of specific energy.

Paleoproterozoic Keulik-Kenirim Ore-Bearing Gabbro-Peridotite Complex, Kola Region: A New Occurrence of Ferropicritic Magmatism

NASA Astrophysics Data System (ADS)

Smolkin, V. F.; Lokhov, K. I.; Skublov, S. G.; Sergeeva, L. Yu.; Lokhov, D. K.; Sergeev, S. A.

2018-03-01

Comprehensive research of ore-bearing differentiated intrusions of the Keulik-Kenirim structural unit, which represents a fragment of the Paleoproterozoic Pechenga-Varzuga Belt, has been carried out for the first time. The intrusions are subvolcanic by type and lenticular in shape, nearly conformable and steeply dipping. They are made up of peridotite, olivine and plagioclase pyroxenites, and gabbro metamorphosed under amphibolite facies conditions along with host basic volcanics. All intrusive rocks are enriched in TiO2 and FeO. Sulfide Cu-Ni mineralization is represented by disseminated, pocket, and stringer-disseminated types, which are clustered in the peridotitic zone as hanging units and bottom lodes. The Ni content in disseminated ore is estimated at 0.45-0.55 wt % and 1.15-3.32 wt % in ore pockets; the Cu grades are 0.17-0.20 and 0.46-5.65 wt %, respectively. To determine the age of intrusions and metamorphism of intrusive and volcanic rocks, various isotopic systems have been used: Sm-Nd (TIMS) in rock and U-Pb (SIMS SHRIMP) and Lu-Hf (LA-ICP-MS) in zircon. Conclusions on the origin of zircons are based on concentrations of trace elements including REE therein and Hf-Nd correlation in zircons and rocks. The U-Pb system of zircons reflects episodes of igneous rock formation (1982 ± 12 Ma) and their postmagmatic transformation (1938 ± 20 Ma). The last disturbance of the U-Pb isotopic system occurred 700 and 425 Ma. Xenogenic zircons dated from 3.17 to 2.65 Ga have been revealed in the studied samples. These zircons were captured by magma from the Archean basement during its ascent. The intrusions were emplaced synchronously with economic ore formation in the Pechenga ore field (1985 ± 10 Ma). The peak metamorphism of intrusive rocks under amphibolite facies conditions is recorded at 40 Ma later. The differentiated intrusions of the Keulik-Kenirim structural unit are close in their internal structure, mineralogy, and geochemistry, as well as in age and features of related Cu-Ni mineralization to ore-bearing intrusions of the Pechenga ore field, which are derivatives of ferropicritic (ferriferous) magmatism.

Karst mapping in the United States: Past, present and future

USGS Publications Warehouse

Weary, David J.; Doctor, Daniel H.

2015-01-01

The earliest known comprehensive karst map of the entire USA was published by Stringfield and LeGrand (1969), based on compilations of William E. Davies of the U.S. Geological Survey (USGS). Various versions of essentially the same map have been published since. The USGS recently published new digital maps and databases depicting the extent of known karst, potential karst, and pseudokarst areas of the United States of America including Puerto Rico and the U.S. Virgin Islands (Weary and Doctor, 2014). These maps are based primarily on the extent of potentially karstic soluble rock types, and rocks with physical properties conducive to the formation of pseudokarst features. These data were compiled and refined from multiple sources at various spatial resolutions, mostly as digital data supplied by state geological surveys. The database includes polygons delineating areas with potential for karst and that are tagged with attributes intended to facilitate classification of karst regions. Approximately 18% of the surface of the fifty United States is underlain by significantly soluble bedrock. In the eastern United States the extent of outcrop of soluble rocks provides a good first-approximation of the distribution of karst and potential karst areas. In the arid western states, the extent of soluble rock outcrop tends to overestimate the extent of regions that might be considered as karst under current climatic conditions, but the new dataset encompasses those regions nonetheless. This database will be revised as needed, and the present map will be updated as new information is incorporated.

Karst in the United States: a digital map compilation and database

USGS Publications Warehouse

Weary, David J.; Doctor, Daniel H.

2014-01-01

This report describes new digital maps delineating areas of the United States, including Puerto Rico and the U.S. Virgin Islands, having karst or the potential for development of karst and pseudokarst. These maps show areas underlain by soluble rocks and also by volcanic rocks, sedimentary deposits, and permafrost that have potential for karst or pseudokarst development. All 50 States contain rocks with potential for karst development, and about 18 percent of their area is underlain by soluble rocks having karst or the potential for development of karst features. The areas of soluble rocks shown are based primarily on selection from State geologic maps of rock units containing significant amounts of carbonate or evaporite minerals. Areas underlain by soluble rocks are further classified by general climate setting, degree of induration, and degree of exposure. Areas having potential for volcanic pseudokarst are those underlain chiefly by basaltic-flow rocks no older than Miocene in age. Areas with potential for pseudokarst features in sedimentary rocks are in relatively unconsolidated rocks from which pseudokarst features, such as piping caves, have been reported. Areas having potential for development of thermokarst features, mapped exclusively in Alaska, contain permafrost in relatively thick surficial deposits containing ground ice. This report includes a GIS database with links from the map unit polygons to online geologic unit descriptions.

Preliminary lithogeochemical map showing near-surface rock types in the Chesapeake Bay watershed, Virginia and Maryland

USGS Publications Warehouse

Peper, John D.; McCartan, Lucy; Horton, J. Wright; Reddy, James E.

2001-01-01

This preliminary experimental lithogeochemical map shows the distribution of rock types in the Virginia and Maryland parts of the Chesapeake Bay watershed. The map was produced digitally by classifying geologic-map units according to composition, mineralogy, and texture; rather than by age and stratigraphic relationships as shown on traditional geologic maps. This map differs from most lithologic maps in that the lithogeochemical unit classification distinguishes those rock units having key water-reactive minerals that may induce acid neutralization, or reduction, of hosted water at the weathering interface. The validity of these rock units, however, is independent of water chemistry, because the rock units are derived from geologic maps and rock descriptions. Areas of high soil carbon content, and sulfide metal deposits are also shown. Water-reactive minerals and their weathering reactions yield five lithogeochemical unit classes: 1) carbonate rock and calcareous rocks and sediments, the most acid-neutralizing; 2)carbonaceous-sulfidic rocks and sediments, oxygen-depleting and reducing; 3) quartzofeldspathic rocks and siliciclastic sediments, relatively weakly reactive with water; 4) mafic silicate rocks/sediments, oxygen consuming and high solute-load delivering; and, 5) the rarer calcareous-sulfidic (carbonaceous) rocks, neutralizing and reducing. Earlier studies in some parts of the map area have related solute loads in ground and stream waters to some aspects of bedrock lithology. More recent preliminary tests of relationships between four of the classes of mapped lithogeochemical units and ground water chemistry, in the Mid-Atlantic area using this map, have focused on and verified the nitrate-reducing and acid-neutralizing properties of some bedrock and unconsolidated aquifer rock types. Sulfide mineral deposits and their mine-tailings effects on waters are beginning to be studied by others. Additional testing of relationships among the lithogeochemical units and aspects of ground and surface water chemistry could help to refine the lithogeochemical classification, and this map. The testing could also improve the usefulness of the map for assessing aquifer reactivity and the transport properties of reactive contaminants such as acid rain, and nitrate from agricultural sources, in the Chesapeake Bay watershed.

Quantifying Groundwater Availability in Fractured Rock Aquifers of Northern Ugandan Refugee Settlements

NASA Astrophysics Data System (ADS)

Frederiks, R.; Lowry, C.; Mutiibwa, R.; Moisy, S.; Thapa, L.; Oriba, J.

2017-12-01

In the past two years, Uganda has witnessed an influx of nearly one million refugees who have settled in the sparsely populated northwestern region of the country. This rapid population growth has created high demand for clean water resources. Water supply has been unable to keep pace with demand because the fractured rock aquifers underlying the region often produce low yielding wells. To facilitate management of groundwater resources, it is necessary to quantify the spatial distribution of groundwater. In fractured rock aquifers, there is significant spatial variability in water storage because fractures must be both connected and abundant for water to be extracted in usable quantities. Two conceptual models were evaluated to determine the groundwater storage mechanism in the fractured crystalline bedrock aquifers of northwestern Uganda where by permeability is controlled by faulting, which opens up fractures in the bedrock, or weathering, which occurs when water dissolves components of rock. In order to test these two conceptual models, geologic well logs and available hydrologic data were collected and evaluated using geostatistical and numerical groundwater models. The geostatistical analysis focused on identifying spatially distributed patterns of high and low water yield. The conceptual models were evaluated numerically using four inverse groundwater MODFLOW models based on head and estimated flux targets. The models were based on: (1) the mapped bedrock units using an equivalent porous media approach (2) bedrock units with the addition of known fault zones (3) bedrock units with predicted units of deep weathering based on surface slopes, and (4) bedrock units with discrete faults and simulated weathered zones. Predicting permeable zones is vital for water well drilling in much of East Africa and South America where there is an abundance of both fractured rock and tectonic activity. Given that the population of these developing regions is growing, the demand for sufficient clean water is likely to increase significantly in the next few decades. Thus, it is necessary to improve our ability to predict locations of permeable zones in fractured rock aquifers.

Map showing relative ease of excavation in the Salina quadrangle, Utah

USGS Publications Warehouse

Williams, Paul L.

1972-01-01

This map shows the relative ease (or difficulty) with which rocks and surficial deposits can be excavated. Because of rapidly changing technology of excavation and considerable local variability of many rock units, it is not practical to specifically categorize rock units according to type of equipment needed for their excavations. However, it may be stated in general that rock units classed as very easy and easy can in most places be excavated by hand tools and by light machinery such as backhoes and small bulldozers; units included in easy to difficult require blasting and (or) heavy machinery such as rippers and large bulldozers for resistant rocks, and hand tools or light power equipment for soft rocks; and units classes as difficult and very difficult probably require blasting and heavy machinery.The excavation units shown here are based on map units of the geologic map of the Salina quadrangle. Where bedrock is mantled with thin unmapped surficial deposits, ease of excavation shown is that of the bedrock, not that of the thin surficial mantle; where surficial deposits are mapped, ease of excavation shown is that of surficial deposits.

76 FR 63954 - Notice of Lodging of Consent Decree Under the Comprehensive Environmental Response, Compensation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-14

... associated with waste rock piles and open mine pits present at the Site. Additionally, the Consent Decree... United States of America v. Newmont USA Limited, DJ. Ref. 90-11-3-1749. Commenters may request an...

Earth Science: Rocks. Grade 4. Anchorage School District Elementary Science Program.

ERIC Educational Resources Information Center

Anchorage School District, AK.

This unit contains six lessons on rocks for fourth graders. It describes materials, supplementary materials (including films, units, and books) schedule, unit introduction, and background information for teachers. Lessons include: (1) "Rocks Are Everywhere"; (2) "Chart Making"; (3) "Things Are Breaking Up"; (4)…

Microclimate and limits to photosynthesis in a diverse community of hypolithic cyanobacteria in northern Australia.

PubMed

Tracy, Christopher R; Streten-Joyce, Claire; Dalton, Robert; Nussear, Kenneth E; Gibb, Karen S; Christian, Keith A

2010-03-01

Hypolithic microbes, primarily cyanobacteria, inhabit the highly specialized microhabitats under translucent rocks in extreme environments. Here we report findings from hypolithic cyanobacteria found under three types of translucent rocks (quartz, prehnite, agate) in a semiarid region of tropical Australia. We investigated the photosynthetic responses of the cyanobacterial communities to light, temperature and moisture in the laboratory, and we measured the microclimatic variables of temperature and soil moisture under rocks in the field over an annual cycle. We also used molecular techniques to explore the diversity of hypolithic cyanobacteria in this community and their phylogenetic relationships within the context of hypolithic cyanobacteria from other continents. Based on the laboratory experiments, photosynthetic activity required a minimum soil moisture of 15% (by mass). Peak photosynthetic activity occurred between approximately 8 degrees C and 42 degrees C, though some photosynthesis occurred between -1 degrees C and 51 degrees C. Maximum photosynthesis rates also occurred at light levels of approximately 150-550 micromol m(-2) s(-1). We used the field microclimatic data in conjunction with these measurements of photosynthetic efficiency to estimate the amount of time the hypolithic cyanobacteria could be photosynthetically active in the field. Based on these data, we estimated that conditions were appropriate for photosynthetic activity for approximately 942 h (approximately 75 days) during the year. The hypolithic cyanobacteria community under quartz, prehnite and agate rocks was quite diverse both within and between rock types. We identified 115 operational taxonomic units (OTUs), with each rock hosting 8-24 OTUs. A third of the cyanobacteria OTUs from northern Australia grouped with Chroococcidiopsis, a genus that has been identified from hypolithic and endolithic communities from the Gobi, Mojave, Atacama and Antarctic deserts. Several OTUs identified from northern Australia have not been reported to be associated with hypolithic communities previously.

Pyroclastic activity at home plate in Gusev crater, Mars

USGS Publications Warehouse

Squyres, S. W.; Aharonson, O.; Clark, B. C.; Cohen, B. A.; Crumpler, L.; de Souza, P.A.; Farrand, W. H.; Gellert, Ralf; Grant, J.; Grotzinger, J.P.; Haldemann, A.F.C.; Johnson, J. R.; Klingelhofer, G.; Lewis, K.W.; Li, R.; McCoy, T.; McEwen, A.S.; McSween, H.Y.; Ming, D. W.; Moore, Johnnie N.; Morris, R.V.; Parker, T.J.; Rice, J. W.; Ruff, S.; Schmidt, M.; Schroder, C.; Soderblom, L.A.; Yen, A.

2007-01-01

Home Plate is a layered plateau in Gusev crater on Mars. It is composed of clastic rocks of moderately altered alkali basalt composition, enriched in some highly volatile elements. A coarse-grained lower unit lies under a finer-grained upper unit. Textural observations indicate that the lower strata were emplaced in an explosive event, and geochemical considerations favor an explosive volcanic origin over an impact origin. The lower unit likely represents accumulation of pyroclastic materials, whereas the upper unit may represent eolian reworking of the same pyroclastic materials.

Geologic map of the Boulder-Fort Collins-Greeley Area, Colorado

USGS Publications Warehouse

Colton, Roger B.

1978-01-01

This digital map shows the geographic extent of rock stratigraphic units (formations) as compiled by Colton in 1976 under the Front Range Urban Corridor Geology Program. Colton used his own geologic mapping and previously published geologic maps to compile one map having a single classification of geologic units. The resulting published color paper map (USGS Map I-855-G, Colton, 1978) was intended for land-use planning and to depict the regional geology. In 1997-1999, another USGS project designed to address urban growth issues was undertaken. This project, the USGS Front Range Infrastructure Resources Project, undertook to digitize Colton's map at 1:100,000 scale, making it useable in Geographical Information Systems (GIS). That product is described here. In general, the digitized map depicts in its western part Precambrian igneous and metamorphic rocks, Pennsylvanian and younger sedimentary rock units, major faults, and brecciated zones along an eastern strip (5-20 km wide) of the Front Range. The central and eastern parts of the map (Colorado Piedmont) show a mantle of Quaternary unconsolidated deposits and interspersed outcrops of sedimentary rock of Cretaceous or Tertiary age. A surficial mantle of unconsolidated deposits of Quaternary age is differentiated and depicted as eolium (wind-blown sand and silt), alluvium (river gravel, sand, and silt of variable composition), colluvium, and a few landslide deposits. At the mountain front, north-trending, Paleozoic and Mesozoic formations of sandstone, shale, and minor limestone dip mostly eastward and form folds, fault blocks, hogbacks and intervening valleys. Local dikes and sills of Tertiary rhyodacite and basalt intrude rocks near the range front, mostly in the Boulder area.

Detached rock evaluation device

DOEpatents

Hanson, David R.

1986-01-01

A rock detachment evaluation device (10) having an energy transducer unit 1) for sensing vibrations imparted to a subject rock (172) for converting the sensed vibrations into electrical signals, a low band pass filter unit (12) for receiving the electrical signal and transmitting only a low frequency segment thereof, a high band pass filter unit (13) for receiving the electrical signals and for transmitting only a high frequency segment thereof, a comparison unit (14) for receiving the low frequency and high frequency signals and for determining the difference in power between the signals, and a display unit (16) for displaying indicia of the difference, which provides a quantitative measure of rock detachment.

Spatial thermal radiometry contribution to the Massif Armoricain and the Massif Central France litho-structural study

NASA Technical Reports Server (NTRS)

Scanvic, J. Y. (Principal Investigator)

1980-01-01

Thermal zones delimited on HCMM images, by visual interpretation only, were correlated with geological units and carbonated rocks, granitic, and volcanic rocks were individualized rock signature is evolutive parameter and some distinctions were made by addition of day, night and seasonal thermal image interpretation. This analysis also demonstrated that forest cover does not mask the underlying rocks thermal signature. Thermal linears are associated with known tectonics but the observed thermal variations from day to night and from one to another represent a promising concept to be studied in function of neotectonics and hydrogeology. The thermal anomalies discovered represent a potential interest which is to be evaluated. Significant results were obtained in the Mont Dore area and additional geological targets were defined in the Paris Basin and the Montmarault granite.

Hydrocarbon source potential of the Tanezzuft Formation, Murzuq Basin, south-west Libya: An organic geochemical approach

NASA Astrophysics Data System (ADS)

El Diasty, W. Sh.; El Beialy, S. Y.; Anwari, T. A.; Batten, D. J.

2017-06-01

A detailed organic geochemical study of 20 core and cuttings samples collected from the Silurian Tanezzuft Formation, Murzuq Basin, in the south-western part of Libya has demonstrated the advantages of pyrolysis geochemical methods for evaluating the source-rock potential of this geological unit. Rock-Eval pyrolysis results indicate a wide variation in source richness and quality. The basal Hot Shale samples proved to contain abundant immature to early mature kerogen type II/III (oil-gas prone) that had been deposited in a marine environment under terrigenous influence, implying good to excellent source rocks. Strata above the Hot Shale yielded a mixture of terrigenous and marine type III/II kerogen (gas-oil prone) at the same maturity level as the Hot Shale, indicating the presence of only poor to fair source rocks.

Description and analysis of the geohydrologic system in western Pinal County, Arizona

USGS Publications Warehouse

Hardt, W.F.; Cattany, R.E.

1965-01-01

Western Pinal County is between Phoenix and Tucson in the Basin and Range physiographic province of southern Arizona and consists of about 2,000 square miles of valley floor with low relief surrounded by mountains. It is the second largest agricultural area in the State, and about 25 percent of the ground water pumped in the State is from this area. The study area has been divided into four parts. Three of these--the Casa Grande-Florence area, the Eloy area, and the Stanfield-Maricopa area--are in the lower Santa Cruz basin; the fourth--the Gila River area--is a long narrow strip along the Gila River from the Ashurst-Hayden Dam to the confluence of the Gila and Santa Cruz Rivers. The project was undertaken to provide a better understanding of the ground-water supply in relation to the present and potential water use in this area of extensive ground-water development. The arid climate of western Pinal County--combining high temperatures and low humidity--causes most of the precipitation to be returned to the atmosphere by evapotranspiration, which leaves only a very small part for recharge to the ground-water reservoir. The computed potential evapotranspiration--44. 97 inches--is five times greater than the average precipitation. In general, the subsurface materials in western Pinal County are unconsolidated alluvial deposits underlain by consolidated alluvium and crystalline rocks and bounded by mountains consisting of crystalline and minor sedimentary rocks. The crystalline and sedimentary rocks of the mountains are not known to be water bearing in western Pinal County. The impermeable rocks underlying the basin are called the hydrologic bedrock unit in this report. Although the unit may consist of several different rock types, the distinction between them is relatively unimportant in this study because none of them yield appreciable amounts of water. The lower Santa Cruz basin in western Pinal County is divided into two sections by a buried ridge of the hydrologic bedrock unit, referred to in this report as the Casa Grande ridge. The ridge trends in a north-south direction from the Sacaton to the Silver Reef Mountains. The unconsolidated deposits constitute the main storage reservoir for ground water in western Pins/ County. The deposits are divided into four units---the local gravel unit, the lower sand and gravel unit, the silt and clay unit, and the upper sand and gravel unit--all of which are major water-yielding units except the silt and clay unit. The local gravel unit, which is present only in the western section of the lower Santa Cruz basin, ranges in thickness from 0 to nearly 1,000 feet and is generally a productive aquifer. The lower sand and gravel unit, Which is a heterogeneous mixture of sand, gravel, and clay, ranges in thickness from 0 to about 500 feet. Where the lower sand and gravel unit is overlain by the silt and clay unit, it generally contains water under artesian conditions; where it is not overlain by the silt and clay unit, it is indistinguishable from the upper sand and gravel unit, and the water is under water-table conditions. The silt and clay unit is the least permeable deposit of the unconsolidated alluvium, and ranges in thickness from 0 to about 2, 000 feet. Generally it is less productive than the other units of the unconsolidated alluvium, although it yields moderate amounts of water from numerous thin stringers and lenses of highly permeable sand and gravel. The upper sand and gravel unit is at the land surface in most of the area; it ranges in thickness from less than 50 to about 600 feet. The unit has the highest average permeability of all the unconsolidated alluvial units; however, the permeability of the unit varies vertically and laterally, which results in a wide range of well yields. As of 1964, the static water levels in most wells in the basin were still in the upper sand and gravel unit. However, the unit is being dewatered in most of the basin, and water levels in

Three-dimensional geologic map of the Hayward fault, northern California: Correlation of rock unites with variations in seismicity, creep rate, and fault dip

USGS Publications Warehouse

Graymer, R.W.; Ponce, D.A.; Jachens, R.C.; Simpson, R.W.; Phelps, G.A.; Wentworth, C.M.

2005-01-01

In order to better understand mechanisms of active faults, we studied relationships between fault behavior and rock units along the Hayward fault using a three-dimensional geologic map. The three-dimensional map-constructed from hypocenters, potential field data, and surface map data-provided a geologic map of each fault surface, showing rock units on either side of the fault truncated by the fault. The two fault-surface maps were superimposed to create a rock-rock juxtaposition map. The three maps were compared with seismicity, including aseismic patches, surface creep, and fault dip along the fault, by using visuallization software to explore three-dimensional relationships. Fault behavior appears to be correlated to the fault-surface maps, but not to the rock-rock juxtaposition map, suggesting that properties of individual wall-rock units, including rock strength, play an important role in fault behavior. Although preliminary, these results suggest that any attempt to understand the detailed distribution of earthquakes or creep along a fault should include consideration of the rock types that abut the fault surface, including the incorporation of observations of physical properties of the rock bodies that intersect the fault at depth. ?? 2005 Geological Society of America.

Rock Slope Design Criteria

DOT National Transportation Integrated Search

2010-06-01

Based on the stratigraphy and the type of slope stability problems, the flat lying, Paleozoic age, sedimentary : rocks of Ohio were divided into three design units: 1) competent rock design unit consisting of sandstones, limestones, : and siltstones ...

Finite strain analysis of metavolcanics and metapyroclastics in gold-bearing shear zone of the Dungash area, Central Eastern Desert, Egypt

NASA Astrophysics Data System (ADS)

Kassem, Osama M. K.; Abd El Rahim, Said H.

2014-11-01

The Dungash gold mine area is situated in an EW-trending quartz vein along a shear zone in metavolcanic and metasedimentary host rocks in the Eastern Desert of Egypt. These rocks are associated with the major geologic structures, which are attributed to various deformational stages of the Neoproterozoic basement rocks. Field geology, finite strain and microstructural analyses were carried out and the relation-ships between the lithological contacts and major/minor structures have been studied. The R f/ϕ and Fry methods were applied on the metavolcano-sedimentary and metapyroclastic samples from 5 quartz veins samples, 7 metavolcanics samples, 3 metasedimentary samples and 4 metapyroclastic samples in Dungash area. Finite-strain data show that a low to moderate range of deformation of the metavolcano-sedimentary samples and axial ratios in the XZ section range from 1.70 to 4.80 for the R f/ϕ method and from 1.65 to 4.50 for the Fry method. We conclude that finite strain in the deformed rocks is of the same order of magnitude for all units of metavolcano-sedimentary rocks. Furthermore, the contact between principal rock units is sheared in the Dungash area under brittle to semi-ductile deformation conditions. In this case, the accumulated finite strain is associated with the deformation during thrusting to assemble nappe structure. It indicates that the sheared contacts have been formed during the accumulation of finite strain.

New ichnological, paleobotanical and detrital zircon data from an unnamed rock unit in Yukon-Charley Rivers National Preserve (Cretaceous: Alaska): Stratigraphic implications for the region

USGS Publications Warehouse

Fiorillo, Anthony R.; Fanti, Federico; Hults, Chad; Hasiotis, Stephen T

2014-01-01

A paleontological reconnaissance survey on Cretaceous and Paleogene terrestrial units along the Yukon River drainage through much of east-central Alaska has provided new chronostratigraphic constraints, paleoclimatological data, and the first information on local biodiversity within an ancient, high-latitude ecosystem. The studied unnamed rock unit is most notable for its historic economic gold placer deposits, but our survey documents its relevance as a source rock for Mesozoic terrestrial vertebrates, invertebrates, and associated flora. Specifically, new U-Pb ages from detrital zircons combined with ichnological data are indicative of a Late Cretaceous age for at least the lower section of the studied rock unit, previously considered to be representative of nearly exclusively Paleogene deposition. Further, the results of our survey show that this sedimentary rock unit preserves the first record of dinosaurs in the vast east-central Alaska region. Lastly, paleobotanical data, when compared to correlative rock units, support previous interpretations that the Late Cretaceous continental ecosystem of Alaska was heterogeneous in nature and seasonal.

Radon gas: contractor liability for an indoor health hazard.

PubMed

Shuko, C M

1986-01-01

Many families throughout the United States have recently detected dangerously high concentrations of radon gas inside their homes. Radon, a carcinogenic gas produced from uranium, has been discovered in structures overlying uranium-bearing rock. This discovery may result in litigation to determine contractor liability for building upon radon-releasing rock sites. This Note examines the strengths and weaknesses of the various theories of contractor liability and considers potential statutory claims under the Clean Air Act. The Note suggests, as an alternative approach to recovery, a proposed regulatory scheme and implementation plan.

Les amas sulfurés du massif miocène d'El Aouana (Algérie)— I. Dynamisme de mise en place des roches volcaniques et implications métallogéniques

NASA Astrophysics Data System (ADS)

Villemaire, Cl.

Two main units have been distinguished in the Miocene El Aouana area. A tectonic event occurs between their respective deposits inducing faulting, tilting of the lower volcanic unit and caldeira structure. The lower unit comprises first continental air fall pyroclastic rocks and dacitic flows, then marine flow pyroclastic rocks, dacitic flows and epiclastic rocks. The upper volcanic unit, announced by extensive andesitic flows, is characterized by pyroclastic flow sheets. The two units are intruded by dacitic domes. These volcanic rocks belong to the calco-alcaline succession, with well-expressed acidic terms. The ore deposits are formed by lenses, stockworks and lodes. They are massive sulphides ore type. Mineralizations are strictly localized at the contact boundary between dacitic intrusive rocks and marine pyroclastic flows and epiclastic rocks. We suggest that the systematic research of dacitic domes would be successful to increase the mining reserves of this area.

A Model of Equilibrium Conditions of Roof Rock Mass Giving Consideration to the Yielding Capacity of Powered Supports

NASA Astrophysics Data System (ADS)

Jaszczuk, Marek; Pawlikowski, Arkadiusz

2017-12-01

The work presents the model of interactions between the powered roof support units and the rock mass, while giving consideration to the yielding capacity of the supports - a value used for the analysis of equilibrium conditions of roof rock mass strata in geological and mining conditions of a given longwall. In the model, the roof rock mass is kept in equilibrium by: support units, the seam, goafs, and caving rocks (Fig. 1). In the assumed model of external load on the powered roof support units it is a new development - in relation to the model applied in selection of supports based on the allowable deflection of roof theory - that the load bearing capacity is dependent on the increment of the inclination of the roof rock mass and on the properties of the working medium, while giving consideration to the air pockets in the hydraulic systems, the load of the caving rocks on the caving shield, introducing the RA support value of the roof rock mass by the coal seam as a closed-form expression and while giving consideration to the additional support provided by the rocks of the goaf as a horizontal component R01H of the goaf reaction. To determine the roof maintenance conditions it is necessary to know the characteristics linking the yielding capacity of the support units with the heading convergence, which may be measured as the inclination angle of the roof rock mass. In worldwide mining, Ground Reaction Curves are used, which allow to determine the required yielding capacity of support units based on the relation between the load exerted on the unit and the convergence of the heading ensuring the equilibrium of the roof rock mass. (Figs. 4 and 8). The equilibrium of the roof rock mass in given conditions is determined at the displacement of the rock mass by the α angle, which impacts the following values: yielding capacity of units FN, vertical component of goaf reaction R01V and the horizontal component of goaf reaction R01H. In the model of load on the support units giving consideration to the load of the caving shield, a model of support unit was used that allows for unequivocal determination of the yielding capacity of the support with consideration given to the height of the unit in use and the change in the inclination of the canopy resulting from the displacement of the roof of the longwall. The yielding capacity of the support unit and its point of application on the canopy was determined using the method of units which allows for the internal forces to be manifested. The weight of the rock mass depends on the geological and mining conditions, for which the shape and dimensions of the rock mass affecting the support unit are determined. The resultant force of the pressure of gob on the gob shield was calculated by assuming that the load may be understood as a pressure of ground on a wall. This required the specification of the volume of the fallen rocks that affect the unit of powered roof supports (Fig. 2). To determine the support of the roof rock mass by the coal seam, experience of the Australian mining industry was used. Experiments regarding the strength properties of coal have exhibited that vertical deformation, at which the highest seam reaction occurs while supporting the roof rock mass, amounts to 0.5% of the longwall's height. The measure of the width of the contact area between the rock mass and the seam is the width of the additional uncovering of the face roof due to spalling of seam topcorners da (Fig. 2). With the above parameters and the value of the modulus of elasticity of coal in mind, the value of the seam's reaction may be estimated using the dependence (2). The vertical component of the goafs' reaction may be determined based on the strength characteristics of the fallen roof, the contact area of the rock mass with the fallen roof and the mean strain of the fallen roof at the area of contact. In the work by Pawlikowski (2014), a research procedure was proposed which encompasses model tests and exploitation tests of the loads exerted on the support units, aimed at the determination of the vertical component of the goaf reaction (Fig. 5). Based on duty cycles of powered roof support units, a mean value of the indicator of contact stiffness between the roof rock mass and the rocks constituting the caving is determined, assuming the linear dependence between the horizontal reaction and the heading convergence. The parameter allows for the determination of the horizontal component of the goafs' reaction in the external loading model of support units and allows for the determination of the required yielding capacity of supports, required to ensure the equilibrium of the roof rock mass. The experimentally verified model of the external loading of the units was used to conduct simulations of interactions between the KOPEX-095/17-POz support unit and the rock mass in a face characterized by the height of 1.6 m. Based on the data obtained in experiment, the variability of the yielding capacity of the support units was analyzed. A yielding capacity inclination angle of the units was determined for the registered curves (Figs. 6 and 7). At the same time, the presentation of the lines corresponding to the required yielding capacity of units and characterizing the deformability of the support units, allows for the prediction of the yielding capacity of the powered supports and the convergence of the heading in the conditions of a given face (Fig. 9).

Lithogeochemical character of the near-surface bedrock in the Connecticut, Housatonic, and Thames River Basins

USGS Publications Warehouse

Robinson, Gilpin R.; Peper, John D.; Steeves, Peter A.; Desimone, Leslie A.

1999-01-01

This data layer shows the generalized lithologic and geochemical (lithogeochemical) character of near-surface bedrock in the Connecticut, Housatonic, and Thames River Basins and several other small basins that drain into Long Island Sound from Connecticut. The area includes most of Connecticut, western Massachusetts, eastern Vermont, western New Hampshire, and small parts of Rhode Island, New York, and Quebec, Canada.Bedrock geologic rock units are classified into 29 lithogeochemical rock units, on the basis of the relative reactivity of their constituent minerals to dissolution and other weathering reactions and the presence of carbonate or sulfide minerals. The 29 lithogeochemical units (28 of which can be found in the study area) can be grouped into 6 major categories: (1) carbonate-rich rocks, (2) carbonate-poor, clastic sedimentary rocks restricted to distinct depositional basins, (3) metamorphosed, clastic sedimentary rocks (primarily noncalcareous), (4) mafic igneous rocks and their metamorphic equivalents, (5) ultramafic rocks, and (6) felsic igneous and plutonic rocks and their metamorphic equivalents. The lithogeochemical rock units also are grouped into nine lithologic and physiographic provinces (lithophysiographic domains), which can be further grouped into three major regions: (1) western highlands and lowlands, (2) central lowlands, and (3) eastern highlands.

Rock Slope Design Criteria : Executive Summary Report

DOT National Transportation Integrated Search

2010-06-01

Based on the stratigraphy and the type of slope stability problems, the flat lying, Paleozoic age, sedimentary rocks of Ohio were divided into three design units: 1) competent rock design unit consisting of sandstones, limestones, and siltstones that...

National Uranium Resource Evaluation: Newcastle Quadrangle, Wyoming and South Dakota

DOE Office of Scientific and Technical Information (OSTI.GOV)

Santos, E S; Robinson, K; Geer, K A

1982-09-01

Uranium resources of the Newcastle 1/sup 0/x2/sup 0/ Quadrangle, Wyoming and South Dakota were evaluated to a depth of 1500 m (5000 ft) using available surface and subsurface geologic information. Many of the uranium occurrences reported in the literature and in reports of the US Atomic Energy Commission were located, sampled and described. Areas of anomalous radioactivity, interpreted from an aerial radiometric survey, were outlined. Areas favorable for uranium deposits in the subsurface were evaluated using gamma-ray logs. Based on surface and subsurface data, two areas have been delineated which are underlain by rocks deemed favorable as hosts for uraniummore » deposits. One of these is underlain by rocks that contain fluvial arkosic facies in the Wasatch and Fort Union Formations of Tertiary age; the other is underlain by rocks containing fluvial quartzose sandstone facies of the Inyan Kara Group of Early Cretaceous age. Unfavorable environments characterize all rock units of Tertiary age above the Wasatch Formation, all rock units of Cretaceous age above the Inyan Kara Group, and most rock units of Mesozoic and Paleozoic age below the Inyan Kara Group. Unfavorable environments characterize all rock units of Cretaceous age above the Inyan Kara Group, and all rock units of Mesozoic and Paleozoic age below the Inyan Kara Group.« less

Gravity and magnetic data in the vicinity of Virgin Valley, southern Nevada

USGS Publications Warehouse

Morin, Robert L.

2006-01-01

This report contains 10 interpretive cross sections and an integrated text describing the geology of parts of the Colorado, White River, and Death Valley regional ground-water flow systems, Nevada, Utah, and Arizona. The primary purpose of the report is to provide geologic framework data for input into a numerical ground-water model. Therefore, the stratigraphic and structural summaries are written in a hydrogeologic context. The oldest rocks (basement) are Early Proterozoic metamorphic and intrusive crystalline rocks that are considered confining units because of their low permeability. Late Proterozoic to Lower Cambrian clastic units overlie the crystalline rocks and are also considered confining units within the regional flow systems. Above the clastic units are Middle Cambrian to Lower Permian carbonate rocks that are the primary aquifers in the flow systems. The Middle Cambrian to Lower Permian carbonate rocks are overlain by a sequence of mainly clastic rocks of late Paleozoic to Mesozoic age that are mostly considered confining units, but they may be permeable where faulted. Tertiary volcanic and plutonic rocks are exposed in the northern and southern parts of the study area. In the Clover and Delamar Mountains, these rocks are highly deformed by north- and northwest-striking normal and strike-slip faults that are probably important conduits in transmitting ground water from the basins in the northern Colorado and White River flow systems to basins in the southern part of the flow systems. The youngest rocks in the region are Tertiary to Quaternary basin-fill deposits. These rocks consist of middle to late Tertiary sediments consisting of limestone, conglomerate, sandstone, tuff, and gypsum, and younger Quaternary surficial units consisting of alluvium, colluvium, playa deposits, and eolian deposits. Basin-fill deposits are both aquifers and aquitards.

Significance of the Nestos Shearzone in the southern Rhodopes (Northern Greece/Southern Bulgaria)

NASA Astrophysics Data System (ADS)

Nagel, Thorsten; Schmidt, Silke; Janak, Marian; Jahn-Awe, Silke; Froitzheim, Niko; Georgiev, Neven

2010-05-01

The Nestos Shearzone can be traced over 100 kilometers and separates the two main units of the Rhodopes, the Rhodope Terrane in the hangingwall from the Pangaion-Pirin Unit in the footwall. The Rhodope Terrane consists of mingled continental and oceanic basement rocks, intruded by granitic bodies of Cenozoic age. It underwent at least amphibolite facies conditions during the Alpine orogenic cycle and several localities with preserved highpressure and/or ultrahigh-pressure rocks have been found. The age of orogenesis and metamorphism is ambiguous and several Mesozoic and Tertiary cycles may be recorded in that unit. The lowermost level immediately on top of the Nestos Shearzone (Sidironero subunit) mainly consists of rocks derived from a Jurassic arc and appears to show the youngest reported (i.e. Eocene) high-grade metamorphism (including ultra-high-pressure conditions and a subsequent migmatic stage). The underlying Pangaion-Pirin Unit beneath the Nestos Shearzone is build of marbles and Variscan gneisses of disputed Mesozoic paleogeographic position. It is intruded by Oligocene granitoids, which also crosscut the Nestos Shearzone. The Pangaion-Pirin Unit experienced a clockwise PT-path culminating at upper greenschist facies conditions during the Alpine cycle. The Nestos Shearzone is defined by top-to-the-southwest-directed mylonites formed under upper greenschist facies conditions. So far, it has been viewed as a thrust. We present structural and petrological data suggesting that the Nestos Shearzone instead represents a major detachment horizon related to late Eo-Oligocene normal faults in the overlying units. Mylonitisation along the shear zone occurred under conditions postdating peak pressures. The shear zone formed between about 40 Ma and 34 Ma as indicated by the age of high temperature conditions in the hangingwall and the age of Oligocene granitoids crosscutting the mylonites. During this time, pronounced extension and basin formation took place in the hangingwall of the Nestos Shearzone. We propose that the brittle Mesta detachment, which bounds the Mesta Graben to the East, roots into the Nestos Shearzone. Themetamorphic history of the Pangaion-Pirin Unit as well as the proposed young age of the Nestos Shearzone is in conflict with studies proposing that this unit represents an independent microcontinent (Drama) accreted to the future Rhodopes in late Jurassic or early Cretaceous times. Instead, we propose that the Pangaion-Pirin Unit could be derived from the Apulian plate, which would have far reaching consequences for the structural architecture of the Hellenic orogen.

A Hydrostratigraphic Model and Alternatives for the Groundwater Flow and Contaminant Transport Model of Corrective Action Unit 97: Yucca Flat-Climax Mine, Lincoln and Nye Counties, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geotechnical Sciences Group Bechtel Nevada

2006-01-01

A new three-dimensional hydrostratigraphic framework model for the Yucca Flat-Climax Mine Corrective Action Unit was completed in 2005. The model area includes Yucca Flat and Climax Mine, former nuclear testing areas at the Nevada Test Site, and proximal areas. The model area is approximately 1,250 square kilometers in size and is geologically complex. Yucca Flat is a topographically closed basin typical of many valleys in the Basin and Range province. Faulted and tilted blocks of Tertiary-age volcanic rocks and underlying Proterozoic and Paleozoic sedimentary rocks form low ranges around the structural basin. During the Cretaceous Period a granitic intrusive wasmore » emplaced at the north end of Yucca Flat. A diverse set of geological and geophysical data collected over the past 50 years was used to develop a structural model and hydrostratigraphic system for the basin. These were integrated using EarthVision? software to develop the 3-dimensional hydrostratigraphic framework model. Fifty-six stratigraphic units in the model area were grouped into 25 hydrostratigraphic units based on each unit's propensity toward aquifer or aquitard characteristics. The authors organized the alluvial section into 3 hydrostratigraphic units including 2 aquifers and 1 confining unit. The volcanic units in the model area are organized into 13 hydrostratigraphic units that include 8 aquifers and 5 confining units. The underlying pre-Tertiary rocks are divided into 7 hydrostratigraphic units, including 3 aquifers and 4 confining units. Other units include 1 Tertiary-age sedimentary confining unit and 1 Mesozoic-age granitic confining unit. The model depicts the thickness, extent, and geometric relationships of these hydrostratigraphic units (''layers'' in the model) along with the major structural features (i.e., faults). The model incorporates 178 high-angle normal faults of Tertiary age and 2 low-angle thrust faults of Mesozoic age. The complexity of the model area and the non-uniqueness of some of the interpretations incorporated into the base model made it necessary to formulate alternative interpretations for some of the major features in the model. Five of these alternatives were developed so they could be modeled in the same fashion as the base model. This work was done for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of the Underground Test Area subproject of the Environmental Restoration Project.« less

Summary of the geology and resources of uranium in the San Juan Basin and adjacent region, New Mexico, Arizona, Utah, and Colorado

USGS Publications Warehouse

Ridgley, Jennie L.; Green, M.W.; Pierson, C.T.; Finch, W.I.; Lupe, R.D.

1978-01-01

The San Juan Basin and adjacent region lie predominantly in the southeastern part of the uranium-rich Colorado Plateau of New Mexico, Arizona, Utah, and Colorado. Underlying the province are rocks of the Precambrian basement complex composed mainly of igneous and metamorphic rocks; a thickness of about 3,600 meters of generally horizontal Paleozoic, Mesozoic, and Cenozoic sedimentary rocks; and a variety of Upper Cretaceous and Cenozoic igneous rocks. Sedimentary rocks of the sequence are commonly eroded and well exposed near the present basin margins where Tertiary tectonic activity has uplifted, folded, and faulted the sequence into its present geologic configuration of basins, platforms, monoclines, and other related structural features. Sedimentary rocks of Jurassic age in the southern part of the San Juan Basin contain the largest uranium deposits in the United States, and offer the promise of additional uranium deposits. Elsewhere in the basin and the adjacent Colorado Plateau, reserves and resources of uranium are known primarily in Triassic, Jurassic, and Cretaceous strata. Only scattered occurrences of uranium are known in Paleozoic

Mapping the radon potential of the united states: Examples from the Appalachians

USGS Publications Warehouse

Gundersen, L.C.S.; Schumann, R.R.; ,

1997-01-01

The geologic radon potential of the United States was recently assessed by the U.S. Geological Survey. Results indicate that approximately 33% of the U.S. population lives within geologic provinces where the average indoor radon levels have the potential to be greater than 4 pCi/L (147 Bq/m3). Rock types most commonly associated with high indoor radon include: 1) Uraniferous metamorphosed sediments, volcanics, and granite intrusives, especially those that are highly deformed or sheared. 2) Glacial deposits derived from uranium-bearing rocks and sediments. 3) Carboniferous, black shales. 4) Soils derived from carbonate rock, especially in karstic terrain. 5) Uraniferous fluvial, deltaic, marine, and lacustrine deposits. Different geologic terrains of the eastern United States illustrate some of the problems inherent in correlating indoor radon with geology. The Central and Southern Appalachian Highlands of the eastern United States have not been glaciated and most soils there are saprolitic, derived directly from the underlying bedrock. Regression analyses of bedrock geologic and radon parameters yield positive correlations (R > 0.5 to 0.9) and indicate that bedrock geology can account for a significant portion of the indoor radon variation. In glaciated areas of the United States such as the northern Appalachian Highlands and Appalachian Plateau, the correlation of bedrock geology to indoor radon is obscured or is positive only in certain cases. In these glaciated areas of the country, it is the type, composition, thickness, and permeability of glacial deposits, rather than the bedrock geology, that controls the radon source.

Effect of Hydrothermal Alteration on Rock Properties in Active Geothermal Setting

NASA Astrophysics Data System (ADS)

Mikisek, P.; Bignall, G.; Sepulveda, F.; Sass, I.

2012-04-01

Hydrothermal alteration records the physical-chemical changes of rock and mineral phases caused by the interaction of hot fluids and wall rock, which can impact effective permeability, porosity, thermal parameters, rock strength and other rock properties. In this project, an experimental approach has been used to investigate the effects of hydrothermal alteration on rock properties. A rock property database of contrastingly altered rock types and intensities has been established. The database details horizontal and vertical permeability, porosity, density, thermal conductivity and thermal heat capacity for ~300 drill core samples from wells THM12, THM13, THM14, THM17, THM18, THM22 and TH18 in the Wairakei-Tauhara geothermal system (New Zealand), which has been compared with observed hydrothermal alteration type, rank and intensity obtained from XRD analysis and optical microscopy. Samples were selected from clay-altered tuff and intercalated siltstones of the Huka Falls Formation, which acts as a cap rock at Wairakei-Tauhara, and tuffaceous sandstones of the Waiora Formation, which is a primary reservoir-hosting unit for lateral and vertical fluid flows in the geothermal system. The Huka Falls Formation exhibits argillic-type alteration of varying intensity, while underlying Waiora Formations exhibits argillic- and propylithic-type alteration. We plan to use a tempered triaxial test cell at hydrothermal temperatures (up to 200°C) and pressures typical of geothermal conditions, to simulate hot (thermal) fluid percolation through the rock matrix of an inferred "reservoir". Compressibility data will be obtained under a range of operating (simulation reservoir) conditions, in a series of multiple week to month-long experiments that will monitor change in permeability and rock strength accompanying advancing hydrothermal alteration intensity caused by the hot brine interacting with the rock matrix. We suggest, our work will provide new baseline information concerning fluid-rock interaction processes in geothermal reservoirs, and their effects on rock properties, that will aid improved understanding of the evolution of high-temperature geothermal systems, provide constraints to parameterization of reservoir models and assist future well planning and design through prediction of rock properties in the context of drilling strategies.

MX Siting Investigation. Geotechnical Evaluation. Detailed Aggregate Resources Study. Pahroc Study Area, Nevada.

DTIC Science & Technology

1981-06-05

source is a fairly limited outcrop of calcareous sandstone classified as dolomite rock (Do). Class RBIb Sources: Pour basin-fill sources within the study...Paleozoic rocks consist of limestone, dolomite , and quartzite with interbedded sandstone and shale. These units are generally exposed along the northern...categories simplify discussion and presentation without altering the conclusions of the study. 2.2.1 Rock Units Dolomite rocks (Do) and carbonate rocks

Evaluation of the ground-water resources of parts of Lancaster and Berks Counties, Pennsylvania

USGS Publications Warehouse

Gerhart, J.M.; Lazorchick, G.J.

1984-01-01

Secondary openings in bedrock are the avenues for virtually all ground-water flow in a 626-sqare-mile area in Lancaster and Berks Counties, Pennsylvania. The number, size, and interconnection of secondary openings are functions of lithology, depth, and topography. Ground water actively circulates to depths of 150 to 300 feet below land surface. Total average annual ground-water recharge for the area is 388 million gallons per day, most of which discharges to streams from local, unconfined flow systems. A digital ground-water flow model was developed to simulate unconfined flow under several different recharge and withdrawal scenarios. On the basis of lithologic and hydrologic differences, the modeled area was sub-divided into 22 hydrogeologic units. A finite-difference grid with rectangular blocks, each 2,015 by 2,332 feet, was used. The model was calibrated under steady-state and transient conditions. The steady-state calibration was used to determine hydraulic conductivities and stream leakage coefficients and the transient calibration was used to determine specific yields. The 22 hydrogeologic units fall into four general lithologies: Carbonate rocks, metamorphic rocks, Paleozoic sedimentary rocks, and Triassic sedimentary rocks. Average hydraulic conductivity ranges from about 8.8 feet per day in carbonate units to about .5 feet per day in metamorphic units. The Stonehenge Formation (limestone) has the greatest average hydraulic conductivity--85.2 feet per day in carbonate units to about 0.11 feet per day in the greatest gaining-strem leakage coefficient--16.81 feet per day. Specific yield ranges from 0.06 to 0.09 in carbonate units, and is 0.02 to 0.015, and 0.012 in metamorphic, Paleozoic sedimentary, and Triassic sedimentary units, respectively. Transient simulations were made to determine the effects of four different combinations of natural and artificial stresses. Natural aquifer conditions (no ground-water withdrawals) and actual aquifer conditions (current ground-water withdrawals) were simulated for two years under normal seasonal and hypothetical drought (60-percent reduction in winter-spring recharge) conditions. In October, 6 months after the hypothetical drought, simulated declines in water-table altitude due to the drought occurred everywhere and ranged from a median of 3.6 feet in carbonate units to 8.7 feet in carbonate units. Simulated base flows for five major streams were reduced by 33 to 51 percent during the hypothetical drought. Also in October, maximum simulated declines in water-table altitude due to ground-water withdrawls ranged from 33 feet in carbonate units to 79 feet in Triassic sedimentary units. Simulated base flows for five major streams were reduced by the amount of ground water withdrawn. Finally, again in October, maximum simulated declines in water-table altitude due to the combination of hypothetical drought and ground-water withdrawls ranged from 38 feet in carbonate units to 109 feet in Triassic sedimentary units. Due to aquifer dewatering, simulated declines were as much as 24 feet greater than the sum of the separate simulated declines that were caused by hypothetical drought and ground-water withdrawals. Some of the greatest simulated declines were in well fields, operated by three municipalities that experienced water-supply problems during the 1980-81 drought.

Spatial variation of radon and helium in soil gas vis-à-vis geology of area, NW Himalayas, India

NASA Astrophysics Data System (ADS)

Mahajan, S.; Bajwa, B.; Kumar, A.; Singh, S.; Walia, V.; Yang, T. F.

2009-12-01

In an effort to quantify the geological/lithological control on radon, helium soil gas potential and appraise the use of soil gas technique as a geological mapping tool, soil gas measurements were made, in some parts of Himachal Himalayas of NW Himalayan range, using soil gas grab sampling technique. More than 360 soil gas samples were collected from four different geological/lithologic rock units of the area under consideration. The collected soil gas samples were analyzed for radon and helium using RTM-2100 (SARAD) and Helium leak detector (ALCATEL) respectively. The observed values were then correlated with the geology/lithology of the study area. The study area is broadly divided into four different units on the basis of geology/lithology i.e. (A) Upper Shiwaliks (B) Middle & Lower Shiwaliks (C) Lesser Himalayan rocks (D) Higher Himalayan rocks. Significant differences in the soil gas concentrations among the geologic units were observed, where Lesser Himalayan rocks showing maximum concentrations of both radon (254 KBq/m3) and helium (5.46 ppm). Lesser Himalayan zone lies mainly between two major thrusts MBT and MCT running along the Himalayan trend, which still are tectonically active. It can be concluded from the present study that soil gases (radon and helium) can be used as a productive tool for geological mapping. These findings may have very important connation for health risk assessment of the area, since it has been shown that radon soil gas found in soils overlying basement rocks are the main source for indoor radon concentrations. Radioactive isotopes attach rapidly to atmospheric aerosols and can enter into a human body thus constitute significant hazard to human health.

Hydrogeologic unit map of the Piedmont and Blue Ridge provinces of North Carolina

USGS Publications Warehouse

Daniel, Charles C.; Payne, R.A.

1990-01-01

The numerous geologic formations and rock types in the Piedmont and Blue Ridge provinces of North Carolina have been grouped into 21 hydrogeologic units on the basis of their water-bearing potential as determined from rock origin, composition, and texture. All major classes of rocks--metamorphic, igneous, and sedimentary--are present, although metamorphic rocks are the most abundant. The origin of the hydrogeologic units is indicated by the rock class or subclass (metaigneous, metavolanic, or metasedimentary). The composition of the igneous, metaigneous, and metavolcanic rocks is designated as felsic, intermediate, or mafic except for the addition in the metavolcanic group of epiclastic rocks and compositionally undifferentiated rocks. Composition is the controlling attribute in the classification of the metasedimentary units of gneiss (mafic or felsic), marble, quartzite. The other metasediments are designated primarily on the basis of texture (grain size, degree of metamorphism, and development of foliation). Sedimentary rocks occur in the Piedmont in several downfaulted basins. A computerized data file containing records from more than 6,200 wells was analyzed to determine average well yields in each of the 21 units. The well yields were adjusted to an average well depth of 154 feet and an average diameter of 6 inches, the average of all wells in the data set, to remove the variation in well yield attributed to differences in depth and diameter. Average yields range from a high of 23.6 gallons per minute for schist to a low 11.6 gallons per minute for sedimentary rocks of Triassic age.

Ribbed moraine stratigraphy and formation in southern Finnish Lapland

NASA Astrophysics Data System (ADS)

Sarala, Pertti

2006-05-01

Characteristics of ribbed moraines, the dominating moraine type in southern Finnish Lapland, have been studied in detail. The ridges are composed of several till units, of which the bottommost units consist of mature basal tills and the surficial parts are enriched with local, short-transport rock fragments and boulders in till and at the surface of ridges. As a result of this re-examination a two-step model of the formation process of ribbed moraines is presented. In the first stage, while cold-based conditions prevailed, both the bottommost part of the ice sheet and the frozen, substrate fractured under compressive ice flow. Following glacial transport of fractured blocks and formation of the transverse ridge morphology, erosion between the ridges continued owing to freeze-thaw process under variable pressure conditions. In the areas with a low pre-existing till sheet, the process caused quarrying of the bedrock surface and subsequent deposition of rock fragments and boulders under high pressure on the next ridge. The most suitable conditions for ribbed moraine formation existed during Late Weichselian deglaciation, after the Younger Dryas when the climate warmed very quickly, leading to an imbalance between a warm glacier surface and a cold base. Copyright

Deformation associated to exhumation by detachment faulting of upper mantle rocks in a fossil Ocean Continent Transition: The example of the Totalp unit in SE Switzerland

NASA Astrophysics Data System (ADS)

Picazo, S.; Manatschal, G.; Cannat, M.

2013-12-01

The exhumation of upper mantle rocks along detachment faults is widespread at Mid-Ocean Ridges and at the Ocean-Continent Transition (OCT) of rifted continental margins. Thermo-mechanical models indicate that significant strain softening of the fault rocks in the footwall is required in order to produce such large fault offsets. Our work focuses on deformation textures, and the associated mineralogy in ultramafic rocks sampled in the upper levels of the footwall next to the exhumation fault. We present two OCT examples, the Totalp relict of a paleo-Tethys OCT exposed in SE Switzerland, and the Iberian distal margin (ODP Leg 173 Site 1070). We built a new geological map and a section of the Totalp unit near Davos (SE Switzerland) and interpreted this area as a local exposure of a paleo-seafloor that is formed by an exhumed detachment surface and serpentinized peridotites. The top of the exhumed mantle rocks is made of ophicalcites that resulted from the carbonation of serpentine under static conditions at the seafloor. The ophicalcites preserve depositional contacts with Upper Jurassic to Lower Cretaceous pelagic sediments. These sequences did not exceed prehnite-pumpellyite metamorphic facies conditions, and locally escaped Alpine deformation. Thin mylonitic shear zones as well as foliated amphibole-bearing ultramafic rocks have been mapped. The age of these rocks and the link with the final exhumation history are yet unknown but since amphibole-bearing ultramafic rocks can be found as clasts in cataclasites related to the detachment fault, they pre-date detachment faulting. Our petrostructural study of the exhumed serpentinized rocks also reveals a deformation gradient from cataclasis to gouge formation within 150m in the footwall of the proposed paleo-detachment fault. This deformation postdates serpentinization. It involves a component of plastic deformation of serpentine in the most highly strained intervals that has suffered pronounced grain-size reduction and a polyphase cataclastic overprint.

Hydrothermal alteration maps of the central and southern Basin and Range province of the United States compiled from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data

USGS Publications Warehouse

Mars, John L.

2013-01-01

Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data and Interactive Data Language (IDL) logical operator algorithms were used to map hydrothermally altered rocks in the central and southern parts of the Basin and Range province of the United States. The hydrothermally altered rocks mapped in this study include (1) hydrothermal silica-rich rocks (hydrous quartz, chalcedony, opal, and amorphous silica), (2) propylitic rocks (calcite-dolomite and epidote-chlorite mapped as separate mineral groups), (3) argillic rocks (alunite-pyrophyllite-kaolinite), and (4) phyllic rocks (sericite-muscovite). A series of hydrothermal alteration maps, which identify the potential locations of hydrothermal silica-rich, propylitic, argillic, and phyllic rocks on Landsat Thematic Mapper (TM) band 7 orthorectified images, and geographic information systems shape files of hydrothermal alteration units are provided in this study.

Significance of the Nestos Shearzone in the southern Rhodopes (Northern Greece/Southern Bulgaria)

NASA Astrophysics Data System (ADS)

Nagel, T. J.; Schmidt, S.; Froitzheim, N.; Jahn-Awe, S.; Georgiev, N.

2009-04-01

The Nestos Shearzone can be traced over 100 kilometers and separates the two main units of the Rhodopes, the Upper Complex in the hangingwall from the Pangaion-Pirin Unit in the footwall. The Upper Complex consists of mingled continental and oceanic basement rocks, intruded by granitic bodies of Cretaceous and Tertiary age. It underwent at least amphibolite facies conditions during the Alpine orogenic cycle and several localities with preserved high-pressure and/or ultrahigh-pressure rocks have been found. The age of orogenesis and metamorphism is ambiguous and several Mesozoic and Tertiary cycles may be recorded in that unit. The lowermost level immediately on top of the Nestos Shearzone (Sidironero subunit) mainly consists of rocks derived from a Jurassic arc and appears to show the youngest reported (i.e. Eocene) high-grade metamorphism (including ultra-high-pressure conditions and a subsequent migmatic stage). The underlying Pangaion-Pirin Unit beneath the Nestos Shearzone is build of marbles and Variscan gneisses of disputed Mesozoic paleogeographic position. It is intruded by Oligocene granitoids, which also crosscut the Nestos shearzone. The Pangaion-Pirin Unit experienced only blueschist facies and subsequent upper greenschist facies conditions during the Alpine cycle. The Nestos Shearzone is defined by top-to-the-southwest-directed mylonites formed under upper greenschist facies conditions. So far, it has been viewed as a thrust. We present structural and petrological data suggesting that the Nestos Shearzone is instead a major mid-crustal detachment related to late Eo-Oligocene backarc extension. Mylonitisation along the shear zone occurred under greenschist facies conditions and postdates the blueschist facies stage. The shear zone formed between about 40 Ma and 34 Ma as indicated by the age of high temperature conditions in the hangingwall and the age of Oligocene granitoids crosscutting the mylonites. During this time, pronounced extension and basin formation took place in the hangingwall of the Nestos Shearzone. We propose that the brittle Mesta detachment, which bounds the Mesta Graben to the East, roots into the Nestos Shearzone. The metamorphic history of the Pangaion-Pirin Unit as well as the proposed young age of the Nestos Shearzone is in conflict with studies proposing that this unit represents an independent microcontinent (Drama) accreted to the future Rhodopes in late Jurassic or early Cretaceous times. Instead, we hypothesize that the Pangaion-Pirin Unit could be derived from the Apulian plate, which would have far reaching consequences for the structural architecture of the Aegean Sea area.

Measurements of unjacketed moduli of porous rock

NASA Astrophysics Data System (ADS)

Tarokh, A.; Makhnenko, R. Y.; Labuz, J.

2017-12-01

Coupling of stress and pore pressure appears in a number of applications dealing with subsurface (sedimentary) rock, including petroleum exploration and waste storage. Poroelastic analyses consider the compressibility of the solid constituents forming the rock, and often times solid bulk modulus Ks is assumed to be the same as the dominant mineral bulk modulus. In fact, there are two different parameters describing solid compressibility of a porous rock: the unjacketed bulk modulus Ks' and the unjacketed pore modulus Ks". Experimental techniques are developed to measure the two poroelastic parameters of fluid-saturated porous rock under the unjacketed condition. In an unjacketed experiment, the rock without a membrane is loaded by the fluid in a pressure vessel. The confining fluid permeates the connected pore space throughout the interior of the rock. Therefore, changes in mean stress P will produce equal changes in pore pressure p, i.e. ΔP = Δp. The test can also be performed with a jacketed rock specimen by applying equal increments of mean stress and pore pressure. The unjacketed bulk modulus, Ks', is obtained by measuring the bulk strain with resistive strain gages. The unjacketed pore modulus, Ks", the pore volume counterpart to Ks', is a measure of the change in pore pressure per unit pore volume strain under the unjacketed condition. Several indirect estimates of Ks" have been reported but limitations of these approaches do not provide an accurate value. We present direct measurements of Ks" with detailed calibration on the system volumetric response. The results indicate that for Dunnville sandstone Ks' and Ks" are equal while for Berea sandstone, a difference between the two moduli exists, which is explained by the presence of non-connected pores. The experiments also strongly suggest that both Ks' and Ks" are independent of effective stress.

On the use of Li isotopes as a proxy for water-rock interaction in fractured crystalline rocks: A case study from the Gotthard rail base tunnel

NASA Astrophysics Data System (ADS)

Wanner, Christoph; Bucher, Kurt; Pogge von Strandmann, Philip A. E.; Waber, H. Niklaus; Pettke, Thomas

2017-02-01

We present Li isotope measurements of groundwater samples collected during drilling of the 57 km long Gotthard rail base tunnel in Switzerland, to explore the use of Li isotope measurements for tracking water-rock interactions in fractured crystalline rocks at temperatures of up to 43 °C. The 17 groundwater samples originate from water-conducting fractures within two specific crystalline rock units, which are characterized by a similar rock mineralogy, but significantly different fluid composition. In particular, the aqueous Li concentrations observed in samples from the two units vary from 1-4 mg/L to 0.01-0.02 mg/L. Whereas δ7Li values from the unit with high Li concentrations are basically constant (δ7Li = 8.5-9.1‰), prominent variations are recorded for the samples from the unit with low Li concentrations (δ7Li = 10-41‰). This observation demonstrates that Li isotope fractionation can be highly sensitive to aqueous Li concentrations. Moreover, δ7Li values from the unit with low Li concentrations correlate well with reaction progress parameters such as pH and [Li]/[Na] ratios, suggesting that δ7Li values are mainly controlled by the residence time of the fracture groundwater. Consequently, 1D reactive transport modeling was performed to simulate mineral reactions and associated Li isotope fractionation along a water-conducting fracture system using the code TOUGHREACT. Modeling results confirm the residence time hypothesis and demonstrate that the absence of δ7Li variation at high Li concentrations can be well explained by limitation of the amount of Li that is incorporated into secondary minerals. Modeling results also suggest that Li uptake by kaolinite forms the key process to cause Li isotope fractionation in the investigated alkaline system (pH >9), and that under slow flow conditions (<10 m/year), this process is associated with a very large Li isotope fractionation factor (ε ≈ -50‰). Moreover, our simulations demonstrate that for simple and well-defined systems with known residence times and low Li concentrations, δ7Li values may help to quantify mineral reaction rates if more thermodynamic data about the temperature-dependent incorporation of Li in secondary minerals as well as corresponding fractionation factors become available in the future. In conclusion, δ7Li values may be a powerful tool to track water-rock interaction in fractured crystalline rocks at temperature higher than those at the Earth's surface, although their use is restricted to low Li concentrations and well defined flow systems.

Ordovician of the Sauk megasequence in the Ozark region of northern Arkansas and parts of Missouri and adjacent states: Chapter 11

USGS Publications Warehouse

Ethington, Raymond L.; Repetski, John E.; Derby, James R.

2012-01-01

The oldest formation that crops out in the region is the Jefferson City Dolomite, which may be present in outcrops along incised river valleys near the Missouri-Arkansas border. Rare fossil gastropods, bivalves, brachiopods, conodonts, and trilobites permit correlation of the Cotter through Powell Dolomites with Ibexian strata elsewhere in Laurentia. Conodonts in the Black Rock Limestone Member of the Smithville Formation and the upper part of the Powell Dolomite confirm regional relationships that have been suggested for these units; those of the Black Rock Limestone Member are consistent with deposition under more open marine conditions than existed when older and younger units were forming. Brachiopods and conodonts from the overlying Everton Formation assist in interpreting complex facies within that formation and its correlation to equivalent rocks elsewhere. The youngest conodonts in the Everton Formation provide an age limit for the Sauk-Tippecanoe unconformity near the southern extremity of the great American carbonate bank. The correlation to coeval strata in the Ouachita Mountains of central Arkansas and in the Arbuckle Mountains of Oklahoma and to rocks penetrated in wells drilled in the Reelfoot rift basin has been improved greatly in recent years by integration of biostratigraphic data with lithologic information.

Bicarbonate content of groundwater in carbonate rock in eastern North America

USGS Publications Warehouse

Trainer, F.W.; Heath, R.C.

1976-01-01

In carbonate-rock terrane the most effective solution occurs where soil and vegetative cover facilitate biogenic production and storage of CO2 in the soil until part of it is carried downward in percolating water. Bicarbonate data for groundwater in eastern North America are examined in the light of these conditions, of the CO2 content of soil gas, and of the timing of groundwater recharge relative to seasonal changes in soil temperature. There appears to be no well-marked relation between latitude and bicarbonate content of groundwater in this region. Interplay of all the factors listed above, and of lithology and soil types, is evidently such that under optimum conditions the amount of solution of carbonate rock is roughly comparable, per unit of groundwater recharge, over the region from Ohio to Florida (and, perhaps, to Puerto Rico and Yucatan). Relatively low HCO3 concentrations observed in much of the southern United States are attributed to low production and storage of CO2 in sandy soil that is poor in organic matter. On the other hand, concentrations observed in Ontario, New York and Michigan are markedly higher than is to be expected from interrelations of the factors considered. These high values, apparently anomalous, are attributed in part to solution of granular glacial drift derived largely from carbonate rock. ?? 1976.

In search of the Abrams post office, Trinity County

USGS Publications Warehouse

Lanphere, Marvin A.; Irwin, William P.

1987-01-01

An understanding of earth history depends in part on stratigraphy, a division of geology in which the distinctive features of natural units or formations of layered rocks are studied and described and names are assigned to them. The procedures for describing and naming rock units in a uniform way are incorporated in documents known as stratigraphic codes. The North American Stratigraphic Code (1983) is currently used by most geologists in the United States when formation names are selected. Rock unit names consist of a geographic name, generally taken from a natural feature near the locality where the unit was first described, followed by a descriptive feature, usually the dominant rock type in the unit. Although the procedure for naming a rock unit seems straightforward, stratigraphic nomenclature can lead to confusion when the principles outlined in the stratigraphic code are ignored or incorrectly applied. This paper traces the naming of the Abrams Mica Schist, one of the major units of the northern California Klamath Mountains. It describes how uncertainty about the location of the geographic feature after which the unit was named has led to conflicting terminology. The search revealed some interesting history of the early days of mining in the Coffee Creek region of the Trinity Alps in Trinity County. 

Martian soil stratigraphy and rock coatings observed in color-enhanced Viking Lander images

NASA Technical Reports Server (NTRS)

Strickland, E. L., III

1979-01-01

Subtle color variations of martian surface materials were enhanced in eight Viking Lander (VL) color images. Well-defined soil units recognized at each site (six at VL-1 and four at VL-2), are identified on the basis of color, texture, morphology, and contact relations. The soil units at the Viking 2 site form a well-defined stratigraphic sequence, whereas the sequence at the Viking 1 site is only partially defined. The same relative soil colors occur at the two sites, suggesting that similar soil units are widespread on Mars. Several types of rock surface materials can be recognized at the two sites; dark, relatively 'blue' rock surfaces are probably minimally weathered igneous rock, whereas bright rock surfaces, with a green/(blue + red) ratio higher than that of any other surface material, are interpreted as a weathering product formed in situ on the rock. These rock surface types are common at both sites. Soil adhering to rocks is common at VL-2, but rare at VL-1. The mechanism that produces the weathering coating on rocks probably operates planet-wide.

Bedrock Geologic Map of the Old Lyme Quadrangle, New London and Middlesex Counties, Connecticut

USGS Publications Warehouse

Walsh, Gregory J.; Scott, Robert B.; Aleinikoff, John N.; Armstrong, Thomas R.

2009-01-01

The bedrock geology of the Old Lyme quadrangle consists of Neoproterozoic and Permian gneisses and granites of the Gander and Avalon terranes, Silurian metasedimentary rocks of the Merrimack terrane, and Silurian to Devonian metasedimentary rocks of uncertain origin. The Avalon terrane rocks crop out within the Selden Neck block, and the Gander terrane rocks crop out within the Lyme dome. The Silurian to Devonian rocks crop out between these two massifs. Previous mapping in the Old Lyme quadrangle includes the work by Lawrence Lundgren, Jr. Lundgren's work provides an excellent resource for rock descriptions and detailed modal analyses of rock units that will not be duplicated in this current report. New research that was not covered in detail by Lundgren is the focus of this report and includes (1) evaluation of the rocks in the core of the Lyme dome in an effort to subdivide units in this area; (2) structural analysis of foliations and folds in and around the Lyme dome; (3) geochronology of selected units within the Lyme dome; and (4) analysis of joints and the fracture properties of the rocks.

Microclimate and limits to photosynthesis in a diverse community of hypolithic cyanobacteria in northern Australia

USGS Publications Warehouse

Tracy, Christopher R.; Streten-Joyce, Claire; Dalton, Robert; Nussear, Kenneth E.; Gibb, Karen S.; Christian, Keith A.

2010-01-01

Hypolithic microbes, primarily cyanobacteria, inhabit the highly specialized microhabitats under translucent rocks in extreme environments. Here we report findings from hypolithic cyanobacteria found under three types of translucent rocks (quartz, prehnite, agate) in a semiarid region of tropical Australia. We investigated the photosynthetic responses of the cyanobacterial communities to light, temperature and moisture in the laboratory, and we measured the microclimatic variables of temperature and soil moisture under rocks in the field over an annual cycle. We also used molecular techniques to explore the diversity of hypolithic cyanobacteria in this community and their phylogenetic relationships within the context of hypolithic cyanobacteria from other continents. Based on the laboratory experiments, photosynthetic activity required a minimum soil moisture of 15% (by mass). Peak photosynthetic activity occurred between approximately 8°C and 42°C, though some photosynthesis occurred between −1°C and 51°C. Maximum photosynthesis rates also occurred at light levels of approximately 150–550 μmol m−2 s−1. We used the field microclimatic data in conjunction with these measurements of photosynthetic efficiency to estimate the amount of time the hypolithic cyanobacteria could be photosynthetically active in the field. Based on these data, we estimated that conditions were appropriate for photosynthetic activity for approximately 942 h (∼75 days) during the year. The hypolithic cyanobacteria community under quartz, prehnite and agate rocks was quite diverse both within and between rock types. We identified 115 operational taxonomic units (OTUs), with each rock hosting 8–24 OTUs. A third of the cyanobacteria OTUs from northern Australia grouped with Chroococcidiopsis, a genus that has been identified from hypolithic and endolithic communities from the Gobi, Mojave, Atacama and Antarctic deserts. Several OTUs identified from northern Australia have not been reported to be associated with hypolithic communities previously.

Curiosity Trek

NASA Image and Video Library

2015-12-10

The Mars Science Laboratory, Curiosity, continues its exciting traverse of Mars. In an image acquired in September, it was exploring the boundary between two rock units: the light-toned Murray Formation and the overlying and darker-toned Stimson unit. We can clearly see the rover in a complex terrain marked by tonally varied rocks, which on the surface, can correspond to the contact between rock units and dark sand. http://photojournal.jpl.nasa.gov/catalog/PIA20211

Layering in peralkaline magmas, Ilímaussaq Complex, S Greenland

NASA Astrophysics Data System (ADS)

Hunt, Emma J.; Finch, Adrian A.; Donaldson, Colin H.

2017-01-01

The peralkaline to agpaitic Ilímaussaq Complex, S. Greenland, displays spectacular macrorhythmic (> 5 m) layering via the kakortokite (agpaitic nepheline syenite), which outcrops as the lowest exposed rocks in the complex. This study applies crystal size distribution (CSD) analyses and eudialyte-group mineral chemical compositions to study the marker horizon, Unit 0, and the contact to the underlying Unit - 1. Unit 0 is the best-developed unit in the kakortokites and as such is ideal for gaining insight into processes of crystal formation and growth within the layered kakortokite. The findings are consistent with a model whereby the bulk of the black and red layers developed through in situ crystallisation at the crystal mush-magma interface, whereas the white layer developed through a range of processes operating throughout the magma chamber, including density segregation (gravitational settling and flotation). Primary textures were modified through late-stage textural coarsening via grain overgrowth. An open-system model is proposed, where varying concentrations of halogens, in combination with undercooling, controlled crystal nucleation and growth to form Unit 0. Our observations suggest that the model is applicable more widely to the layering throughout the kakortokite series and potentially other layered peralkaline/agpaitic rocks around the world.

Searching the Sinus Amoris: Using profiles of geological units, impact and volcanic features to characterize a major terrane interface on the Moon

NASA Technical Reports Server (NTRS)

Clark, P.; Joerg, S.; Dehon, R.

1994-01-01

Geochemical profiles of surface units, impact, and volcanic features are studied in detail to determine the underlying structure in an area of extensive mare/highland interface, Sinus Amoris. This study region includes and surrounds the northeastern embayment of Mare Tranquillitatis. The concentrations of two major rock-forming elements (Mg and Al), which were derived from the Apollo 15 orbital geochemical measurements, were used in this study. Mapped units and deposits associated with craters in the northwestern part of the region tend to have correlated low Mg and Al concentrations, indicating the presence of Potassium (K)-Rare Earth Elements (REE)-Phosphorus (P) (KREEP)-enriched basalt. Found along the northeastern rim of Tranquillitatis were areas with correlated high Mg and Al concentration, indicating the presence of troctolite. Distinctive west/east and north/south trends were observed in the concentrations of Mg and Al, and, by implication, in the distribution of major rock components on the surface. Evidence for a systematic geochemical transition in highland or basin-forming units may be observed here in the form of distinctive differences in chemistry in otherwise similar units in the western and eastern portions of the study region.

The Influence of Stratigraphic History on Landscape Evolution

NASA Astrophysics Data System (ADS)

Forte, A. M.; Yanites, B.; Whipple, K. X.

2016-12-01

Variation in rock erodibility can play a significant role in landscape evolution. Using a version of the CHILD landscape evolution model that allows for variations in rock erodibility, we found surprisingly complex landscape evolution in simulations with simple, two unit stratigraphies with contrasting erodibility. This work indicated that the stratigraphic order of units in terms of erodibility, the orientation of the contact with respect to the main drainage direction, and the contact dip angle all have pronounced effects on landscape evolution. Here we expand that work to explore the implications of more complicated stratigraphies on landscape evolution. Introducing multiple units adds additional controls on landscape evolution, namely the thicknesses and relative erodibility of rock layers. In models with a sequence of five alternating hard and soft units embedded within arbitrarily thick over- and underlying units, the number of individual layers that noticeably influence landscape morphology decreases as the thickness of individual layers reduces. Contacts with soft rocks over hard produce the most noticeable effect in model output such as erosion rate and channel steepness. For large contrasts in erodibility of 25 m thick layers, only one soft over hard contact is clearly manifest in the landscape. Between 50 and 75 m, two such contacts are manifest, and by 100 m thickness, all three of these contacts are manifest. However, for a given thickness of layers, more units are manifest in the landscape as the erodibility contrast between units decreases. This is true even though the magnitude of landscape effects away from steady-state erosion rates or channel steepness also decrease with decreasing erodibility contrast. Finally, we explore suites of models with alternating layers reflecting either `hardening-' or `softening-upwards' stratigraphies and find that the two scenarios result in decidedly different landscape forms. Hardening-upwards sections produce a gradational change where as individual layers have more influence in the landscape form in softening-upwards sections. Generally, our modeling highlights that past depositional history can exert a fundamental control on landscape evolution during later erosion through the resulting layered stratigraphy.

Unit: Rocks from Sediments, Inspection Pack, National Trial Print.

ERIC Educational Resources Information Center

Australian Science Education Project, Toorak, Victoria.

Four compulsory introductory activities, involving learning to use a stream tray, observing the relationship between water speed and entraining, transporting and depositing sediments, studying the formation of sedimentary rocks, and examining several types of sedimentary rocks, are completed by all students using the unit prepared for Australian…

Unit: Rocks from Sediments, Inspection Set, First Trial Materials.

ERIC Educational Resources Information Center

Australian Science Education Project, Toorak, Victoria.

Four compulsory introductory activities involving learning to use a stream tray, observing the relationship between water speed and entraining, transporting and depositing sediments, studying the formation of sedimentary rocks, and examining several types of sedimentary rocks are completed by all students using the unit prepared for Australian…

Rock Cycle. K-6 Science Curriculum.

ERIC Educational Resources Information Center

Blueford, J. R.; And Others

Rock Cycle is one of the units of a K-6 unified science curriculum program. The unit consists of four organizing sub-themes: (1) chemistry (introducing the topics of matter, elements, compounds, and chemical bonding); (2) characteristics (presenting hands-on activities with rocks and minerals); (3) minerals (emphasizing the aesthetic and economic…

NACSN, note 67--Application for revision of Articles 36 and 37, Lithodemic units of the North American stratigraphic code

USGS Publications Warehouse

Easton, Robert M.; Edwards, Lucy E.; Orndorff, Randall C.; Duguet, Manuel; Ferrusquia-Villafranca, Ismael

2015-01-01

Currently the North American Stratigraphic Code, (NACSN 2005, Article 37) sets restrictions on the use of the term “complex” for lithodemic units. With exceptions for “volcanic complex” and “structural complex,” a complex must consist of more than one genetic class of rock (i.e., sedimentary, igneous or metamorphic). Thus, the use of the term “complex” to describe masses of intrusive rocks is not allowed. Asimilar restriction is also included in a recent British Geological Survey proposal for using lithodemic units to classify igneous rocks (Gillespie et al. 2008).Currently the North American Stratigraphic Code, (NACSN 2005, Article 37) sets restrictions on the use of the term “complex” for lithodemic units. With exceptions for “volcanic complex” and “structural complex,” a complex must consist of more than one genetic class of rock (i.e., sedimentary, igneous or metamorphic). Thus, the use of the term “complex” to describe masses of intrusive rocks is not allowed. Asimilar restriction is also included in a recent British Geological Survey proposal for using lithodemic units to classify igneous rocks (Gillespie et al. 2008).

Zircon U-Pb ages and Hf isotopic compositions indicate multiple sources for Grenvillian detrital zircon deposited in western Laurentia

NASA Astrophysics Data System (ADS)

Howard, Amanda L.; Farmer, G. Lang; Amato, Jeffrey M.; Fedo, Christopher M.

2015-12-01

Combined U-Pb ages and Hf isotopic data from 1.0 Ga to 1.3 Ga (Grenvillian) detrital zircon in Neoproterozoic and Cambrian siliciclastic sedimentary rocks in southwest North America, and from igneous zircon in potential Mesoproterozoic source rocks, are used to better assess the provenance of detrital zircon potentially transported across Laurentia in major river systems originating in the Grenville orogenic highlands. High-precision hafnium isotopic analyses of individual ∼1.1 Ga detrital zircon from Neoproterozoic siliciclastic sedimentary rocks in Sonora, northern Mexico, reveal that these zircons have low εHf (0) (-22 to -26) and were most likely derived from ∼1.1 Ga granitic rocks embedded in local Mojave Province Paleoproterozoic crust. In contrast, Grenvillian detrital zircons in Cambrian sedimentary rocks in Sonora, the Great Basin, and the Mojave Desert, have generally higher εHf (0) (-15 to -21) as demonstrated both by high precision solution-based, and by lower precision laser ablation, ICPMS data and were likely derived from more distal sources further to the east/southeast in Laurentia. Comparison to new and existing zircon U-Pb geochronology and Hf isotopic data from Grenvillian crystalline rocks from the Appalachian Mountains, central and west Texas, and from Paleoproterozoic terranes throughout southwest North America reveals that zircon in Cambrian sandstones need not entirely represent detritus transported across the continent from Grenville province rocks in the vicinity of the present-day southern Appalachian Mountains. Instead, these zircons could have been derived from more proximal, high εHf (0), ∼1.1 Ga, crystalline rocks such as those exposed today in the Llano Uplift in central Texas and in the Franklin Mountains of west Texas. Regardless of the exact source(s) of the Grenvillian detrital zircon, new and existing whole-rock Nd isotopic data from Neoproterozoic to Cambrian siliciclastic sedimentary rocks in the Mojave Desert demonstrate that the occurrences of higher εHf (0), Grenvillian detrital zircons are decoupled from the sources of the bulk of the sedimentary detritus in which the zircons are entrained. The Cambrian Wood Canyon Formation and the underlying ;off craton; Neoproterozoic Johnnie Formation and Stirling Quartzite all contain higher εHf (0), Grenvillian detrital zircon, in some cases as the dominant detrital zircon population. However, only portions of the Wood Canyon Formation have whole rock Nd isotopic compositions consistent with a bulk sediment source in ∼1.1 Ga sources rocks. Whole rock Nd isotopic compositions of the remaining portions of this unit, and all of the Johnnie Formation and Stirling Quartzite, require bulk sediment sources principally in Paleoproterozoic continental crust. We consider the observed decoupling in the sources of Grenvillian detrital zircon and bulk sediment in the Wood Canyon Formation and underlying siliciclastic sediments as a demonstration that detrital zircon U-Pb and Hf isotopic data alone can provide an incomplete picture of the source of sediments that comprise a given siliciclastic stratigraphic unit.

Tectono-metamorphic evolution of meta-ophiolitic units along Susa Valley (Italian Western Alps): new suggestions for the exhumation processes

NASA Astrophysics Data System (ADS)

Ghignone, Stefano; Borghi, Alessandro; Balestro, Gianni; Gattiglio, Marco

2017-04-01

In the inner Western Alps, meta-ophiolite units (i.e., the Piemonte Zone) show different stages of the tectono-metamorphic evolution, since the early phases of subduction to the latest exhumation steps. Tectono-metamorphic data collected through the meta-ophiolite units of the Piemonte Zone along the middle Susa Valley allowed to infer new ideas about the exhumation processes that developed in the (U)HP units. In this area, Zermatt-Saas-like meta-ophiolite unit (i.e., the eclogite-facies Internal Piemonte Zone, IPZ) are tectonically overlain by Combin-like ones (i.e., the blueschist-facies External Piemonte Zone, EPZ), through a thick shear zone (i.e., the Susa Shear Zone, SSZ). Metamorphic history was achieved by analyzing basic rocks (metabasalt and Fe-Ti metagabbro) and sedimentary rocks derived from reworking basic rocks in oceanic environment (basic sandstones and conglomerates, and ophiolitic breccia). Different P-T paths were inferred for IPZ and EPZ, according with mineral assemblages and realizations of pseudosections. In the IPZ, four tectono-metamorphic events, developed under variables metamorphic conditions, were recognized. The first (peak-P) event shows (U)HP conditions, defined by the occurrence of relic mineral assemblage (Grt I+ Omp I + Rt). The paragenesis is completed by Zo + Pg pseudomorphs, implying that Lws-eclogite facies were reached. The discovery in Grt (and Rt) relics inclusions of black euhedral pseudomorphs of disordered graphite, suggesting to be derived from original microdiamonds, agree with other petrologic constrains. The second event, marked by the Grt II + Omp II + Ph + Gln + Zo assemblage, developed under epidote-eclogite facies conditions. Following a retrograde and decompressional trajectory, the IPZ was then re-equilibrated under greenschist-facies conditions and a new assemblage (Ab + Chl + Mu + Czo + Ttn + Act) overprinted HP paragenesis. The last event is marked by a weak heating, with crystallization of Bt + Ep + Olig + Hbl (Prg) + Ms. The EPZ shows a different metamorphic evolution, where only two events were recognized. The first event developed under blueschist-facies conditions, with relics of mineral assemblages consisting of Gln + Rt + Ph. Then, a retrograde trajectory re-equilibrated EPZ under greenschist-facies conditions and a new stable mineral assemblage (Ab + Chl + Mu + Ttn + Act + Czo) grew. The inferred P-T path suggests, for the IPZ, a first isothermal exhumation stage, likely driven by buoyancy forces from the base of the orogenic wedge. In the EPZ, HP peak occurs at the same gradient of the second event in the IPZ, suggesting that, during exhumation of the IPZ, the EPZ was still subducted. The strong re-equilibration under greenschist-facies conditions suggests a stage of slow exhumation rate, which can be related to the coupling between IPZ and EPZ.

View Toward 'Vera Rubin Ridge' on Mount Sharp, Mars

NASA Image and Video Library

2017-07-11

This look ahead from NASA's Curiosity Mars rover includes four geological layers to be examined by the mission, and higher reaches of Mount Sharp beyond the planned study area. The redder rocks of the foreground are part of the Murray formation. Pale gray rocks in the middle distance of the right half of the image are in the Clay Unit. A band between those terrains is "Vera Rubin Ridge." Rounded brown knobs beyond the Clay Unit are in the Sulfate Unit, beyond which lie higher portions of the mountain. The view combines six images taken with the rover's Mast Camera (Mastcam) on Jan. 24, 2017, during the 1,589th Martian day, or sol, of Curiosity's work on Mars, when the rover was still more than half a mile (about a kilometer) north of Vera Rubin Ridge. The panorama has been white-balanced so that the colors of the rock and sand materials resemble how they would appear under daytime lighting conditions on Earth. It spans from east-southeast on the left to south on the right. The Sol 1589 location was just north of the waypoint labeled "Ogunquit Beach" on a map of the area that also shows locations of the Murray formation, Vera Rubin Ridge, Clay Unit and Sulfate Unit. The ridge was informally named in early 2017 in memory of Vera Cooper Rubin (1928-2016), whose astronomical observations provided evidence for the existence of the universe's dark matter. Annotated and full resolution TIFF files are available at https://photojournal.jpl.nasa.gov/catalog/PIA21716

Geologic map of Harrat Hutaymah, with petrologic classification and distribution of ultramafic inclusions, Saudi Arabia

USGS Publications Warehouse

Thornber, Carl R.

1990-01-01

This map shows detailed geology of the Quaternary and Tertiary volcanic deposits that comprise Harrat Hutaymah and an updated and generalized compilation of the underlying Proterozoic and Paleozoic basement rocks. Quaternary alluvial cover and details of basement geology (that is, faults, dikes, and other features) are not shown. Volcanic unit descriptions and contact relations are based upon field investigation by the author and on compilation and revision of mapping Kellogg (1984; northern half of area) and Pallister (1984; southern half of area). A single K-Ar date of 1.80 ± 0.05 Ma for an alkali olivine basalt flow transected by the Al Hutaymah tuff ring (Pallister, 1984) provides the basis for an estimated late Tertiary to Quaternary age range for all harrat volcanic units other than unit Qtr (tuff reworked during Quaternary age time). Contact relations and unit descriptions for the basement rocks were compiled from Pallister (1984), Kellogg (1984 and 1985), DuBray (1984), Johnson and Williams (1984), Vaslet and others (1987), Cole and Hedge (1986), and Richter and others (1984). All rock unit names in this report are informal and capitalization follows Saudi Arabian stratigraphic nomenclature (Fitch, 1980). Geographic information was compiled from Pallister (1984), Kellogg (1984), and Fuller (in Johnson and Williams, 1984) and from field investigation by the author in 1986. The pie diagrams on the map show the distribution and petrology of ultramafic xenoliths of Harrat Hutaymah. The pie diagrams are explained by a detailed classification of ultramafic xenoliths that is introduced in this report.

Spectrophotometric properties of materials observed by Pancam on the Mars Exploration Rovers: 1. Spirit

USGS Publications Warehouse

Johnson, J. R.; Grundy, W.M.; Lemmon, M.T.; Bell, J.F.; Johnson, M.J.; Deen, R.G.; Arvidson, R. E.; Farrand, W. H.; Guinness, E.A.; Hayes, A.G.; Herkenhoff, K. E.; Seelos, F.; Soderblom, J.; Squyres, S.

2006-01-01

Multispectral observations of rocks and soils were acquired under varying illumination and viewing geometries in visible/near-infrared wavelengths by the Panoramic Camera (Pancam) on the Spirit Mars Exploration Rover to provide constraints on the physical and mineralogical nature of geologic materials in Gusev Crater. Data sets were acquired at six sites located near the landing site, in the surrounding plains, and in the West Spur and Husband Hill regions of the Columbia Hills. From these ???600 images, over 10,000 regions of interest were selected of rocks and soils over a wide range of phase angles (0-130??). Corrections for diffuse skylight incorporated sky models based on observations of atmospheric opacity throughout the mission. Disparity maps created from Pancam stereo images allowed inclusion of estimates of local facet orientations in the sky models. Single-term and two-term phase functions derived from Hapke scattering models exhibit a dominantly broad backscattering trend for soils and "Red" rocks inferred to be covered with variable amounts of dust and other coatings, consistent with the results from the Viking Lander and Imager for Mars Pathfinder cameras. Darker "Gray" rock surfaces (inferred to be relatively less dust covered) display more narrow, forward scattering behaviors, consistent with particles exhibiting little internal scattering. Gray and Red rocks are macroscopically rougher than most soil units, although a "dust-cleaning" event observed near the Paso Robles site caused an increase in soil surface roughness in addition to a substantial decrease in surface single scattering albedo. Gray rocks near the rim of Bonneville Crater exhibit the largest macroscopic roughness (????) among all units, as well as the greatest backscattering among Gray rocks. Photometric properties of coated Red rocks vary in the West Spur region, possibly as a result of weathering differences related to elevation-dependent aeolian regimes. Copyright 2006 by the American Geophysical Union.

Ground-water hydrology of the Hollister and San Juan Valleys, San Benito County, California, 1913-68

USGS Publications Warehouse

Kilburn, Chabot

1973-01-01

The Hollister and San Juan Valleys are within the Gilroy-Hollister ground-water basin. That part of the ground-water basin underlying the valleys consists of three subbasins each of which contains two or more ground-water subunits. The subbasin and subunit boundaries are formed by known or postulated faults, folded sedimentary rocks, and igneous rocks. The principal water-bearing units are lenticular beds of sand and gavel interbedded with clay, silt, sand, and gravel, or their locally consolidated equivalents, which range from Pliocene to Holocene, in age. Ground water occurs mainly under artesian or semiartesian conditions but also under unconfined (water-table) conditions in areas adjacent to most surface streams and, locally, under perched or semiperched conditions. In 1968 the depth to water in wells ranged from approximately 20 feet above land surface to more than 200 feet below land surface. Water-level differences in wells across the boundaries of adjacent subunits ranged from about 1 to more than 100 feet.

Statistical analysis of the radon-222 potential of rocks in Virginia, U.S.A.

USGS Publications Warehouse

Brown, C. Erwin; Mose, D.G.; Mushrush, G.W.; Chrosniak, C.E.

1992-01-01

More than 3,200 indoor radon-222 (222Rn) measurements were made seasonally in an area of about 1,000 square kilometers of the Coastal Plain and Piedmont physiographic provinces in Virginia, U.S.A. Results of these measurements indicate that some geological units are associated, on the average, with twice as much indoor222Rn as other geological units, and that indoor222Rn varies seasonally. The Kruskal-Wallis test was used to test whether indoor222Rn concentrations for data gathered over the winter and summer seasons differ significantly by rock unit. The tests concluded that indoor222Rn concentrations for different rock units were not equal at the 5-percent significance level. The rocks associated with the highest median indoor222Rn concentration are specific rocks in the Mesozoic Culpeper basin, including shale and siltstone units with Jurassic diabase intrusives, and mica schists in the Piedmont physiographic province. The pre-Triassic Peters Creek Schist has the highest ranking in terms of indoor222Rn concentration. The rocks associated with the lowest indoor222Rn concentrations include coastal plain sediments, the Occoquan Granite, Falls Church Tonalite, Piney Branch Mafic and Ultramafic complex, and unnamed mafic and ultramafic inclusions, respectively. The rocks have been ranked according to observed222Rn concentration by transforming the average rank of indoor222Rn concentrations to z scores. ?? 1992 Springer-Verlag New York Inc.

Color Variations on Mount Sharp, Mars White Balanced

NASA Image and Video Library

2016-12-13

The foreground of this scene from the Mast Camera (Mastcam) on NASA's Curiosity Mars rover shows purple-hued rocks near the rover's late-2016 location on lower Mount Sharp. The scene's middle distance includes higher layers that are future destinations for the mission. Variations in color of the rocks hint at the diversity of their composition on lower Mount Sharp. The purple tone of the foreground rocks has been seen in other rocks where Curiosity's Chemical and Mineralogy (CheMin) instrument has detected hematite. Winds and windblown sand in this part of Curiosity's traverse and in this season tend to keep rocks relatively free of dust, which otherwise can cloak rocks' color. The three frames combined into this mosaic were acquired by the Mastcam's right-eye camera on Nov. 10, 2016, during the 1,516th Martian day, or sol, of Curiosity's work on Mars. The scene is presented with a color adjustment that approximates white balancing, to resemble how the rocks and sand would appear under daytime lighting conditions on Earth. Sunlight on Mars is tinged by the dusty atmosphere and this adjustment helps geologists recognize color patterns they are familiar with on Earth. The view spans about 15 compass degrees, with the left edge toward southeast. The rover's planned direction of travel from its location when this scene was recorded is generally southeastward. The orange-looking rocks just above the purplish foreground ones are in the upper portion of the Murray formation, which is the basal section of Mount Sharp, extending up to a ridge-forming layer called the Hematite Unit. Beyond that is the Clay Unit, which is relatively flat and hard to see from this viewpoint. The next rounded hills are the Sulfate Unit, Curiosity's highest planned destination. The most distant slopes in the scene are higher levels of Mount Sharp, beyond where Curiosity will drive. Figure 1 is a version of the same scene with annotations added as reference points for distance, size and relative elevation. The annotations are triangles with text telling the distance (in kilometers) to the point in the image marked by the triangle, the point's elevation (in meters) relative to the rover's location, and the size (in meters) of an object as big as the triangle at that distance. An annotated figure is available at http://photojournal.jpl.nasa.gov/catalog/PIA21256

Hydrogeologic framework of the Wood River Valley aquifer system, south-central Idaho

USGS Publications Warehouse

Bartolino, James R.; Adkins, Candice B.

2012-01-01

The Wood River Valley contains most of the population of Blaine County and the cities of Sun Valley, Ketchum, Hailey, and Bellevue. This mountain valley is underlain by the alluvial Wood River Valley aquifer system, which consists primarily of a single unconfined aquifer that underlies the entire valley, an underlying confined aquifer that is present only in the southernmost valley, and the confining unit that separates them. The entire population of the area depends on groundwater for domestic supply, either from domestic or municipal-supply wells, and rapid population growth since the 1970s has caused concern about the long-term sustainability of the groundwater resource. As part of an ongoing U.S. Geological Survey effort to characterize the groundwater resources of the Wood River Valley, this report describes the hydrogeologic framework of the Wood River Valley aquifer system. Although most of the Wood River Valley aquifer system is composed of Quaternary-age sediments and basalts of the Wood River Valley and its tributaries, older igneous, sedimentary, or metamorphic rocks that underlie these Quaternary deposits also are used for water supply. It is unclear to what extent these rocks are hydraulically connected to the main part of Wood River Valley aquifer system and thus whether they constitute separate aquifers. Paleozoic sedimentary rocks in and near the study area that produce water to wells and springs are the Phi Kappa and Trail Creek Formations (Ordovician and Silurian), the Milligen Formation (Devonian), and the Sun Valley Group including the Wood River Formation (Pennsylvanian-Permian) and the Dollarhide Formation (Permian). These sedimentary rocks are intruded by granitic rocks of the Late Cretaceous Idaho batholith. Eocene Challis Volcanic Group rocks overlie all of the older rocks (except where removed by erosion). Miocene Idavada Volcanics are found in the southern part of the study area. Most of these rocks have been folded, faulted, and metamorphosed to some degree, thus rock types and their relationships vary over distance. Quaternary-age sediment and basalt compose the primary source of groundwater in the Wood River Valley aquifer system. These Quaternary deposits can be divided into three units: a coarse-grained sand and gravel unit, a fine-grained silt and clay unit, and a single basalt unit. The fine- and coarse-grained units were primarily deposited as alluvium derived from glaciation in the surrounding mountains and upper reaches of tributary canyons. The basalt unit is found in the southeastern Bellevue fan area and is composed of two flows of different ages. Most of the groundwater produced from the Wood River Valley aquifer system is from the coarse-grained deposits. The altitude of the pre-Quaternary bedrock surface in the Wood River Valley was compiled from about 1,000 well-driller reports for boreholes drilled to bedrock and about 70 Horizontal-to-Vertical Spectral Ratio (HVSR) ambient-noise measurements. The bedrock surface generally mimics the land surface by decreasing down tributary canyons and the main valley from north to south; it ranges from more than 6,700 feet in Baker Creek to less than 4,600 feet in the central Bellevue fan. Most of the south-central portion of the Bellevue fan is underlain by an apparent topographically closed area on the bedrock surface that appears to drain to the southwest towards Stanton Crossing. Quaternary sediment thickness ranges from less than a foot on main and tributary valley margins to about 350 feet in the central Bellevue fan. Hydraulic conductivity for 81 wells in the study area was estimated from well-performance tests reported on well-driller reports. Estimated hydraulic conductivity for 79 wells completed in alluvium ranges from 1,900 feet per day (ft/d) along Warm Springs Creek to less than 1 ft/d in upper Croy Canyon. A well completed in bedrock had an estimated hydraulic conductivity value of 10 ft/d, one well completed in basalt had a value of 50 ft/d, and three wells completed in the confined system had values ranging from 32 to 52 ft/d. Subsurface outflow of groundwater from the Wood River Valley aquifer system into the eastern Snake River Plain aquifer was estimated to be 4,000 acre-feet per year. Groundwater outflow beneath Stanton Crossing to the Camas Prairie was estimated to be 300 acre-feet per year.

Rifting along the northern Gondwana margin and the evolution of the Rheic Ocean: A Devonian age for the El Castillo volcanic rocks (Salamanca, Central Iberian Zone)

NASA Astrophysics Data System (ADS)

Gutiérrez-Alonso, G.; Murphy, J. B.; Fernández-Suárez, J.; Hamilton, M. A.

2008-12-01

Exposures of volcanic rocks (El Castillo) in the Central Iberian Zone near Salamanca, Spain, are representative of Paleozoic volcanic activity along the northern Gondwanan passive margin. Alkaline basalts and mafic volcaniclastic rocks of this sequence are structurally preserved in the core of the Variscan-Tamames Syncline. On the basis of the occurrence of graptolite fossils in immediately underlying strata, the El Castillo volcanics traditionally have been regarded as Lower Silurian in age. In contrast, most Paleozoic volcanic units in western Iberia are rift-related mafic to felsic rocks emplaced during the Late Cambrian-Early Ordovician, and are attributed to the opening of the Rheic Ocean. We present new zircon U-Pb TIMS data from a mafic volcaniclastic rock within the El Castillo unit. These data yield a near-concordant, upper intercept age of 394.7 ± 1.4 Ma that is interpreted to reflect a Middle Devonian (Emsian-Eifelian) age for the magmatism, demonstrating that the El Castillo volcanic rocks are separated from underlying lower Silurian strata by an unconformity. The U-Pb age is coeval with a widespread extensional event in Iberia preserved in the form of a generalized paraconformity surface described in most of the Iberian Variscan realm. However, in the inner part of the Gondwanan platform, the Cantabrian Zone underwent a major, coeval increase in subsidence and the generation of sedimentary troughs. From this perspective, the eruption age reported here probably represents a discrete phase of incipient rifting along the southern flank of the Rheic Ocean. Paleogeographic reconstructions indicate that this rifting event was coeval with widespread orogeny and ridge subduction along the conjugate northern flank of the Rheic Ocean, the so called Acadian "orogeny". We speculate that ridge subduction resulted in geodynamic coupling of the northern and southern flanks of the Rheic Ocean, and that the extension along the southern flank of the Rheic Ocean is a manifestation of slab pull along the northern flank. This scenario provides a uniform explanation for many features that form at ca. 395 Ma along the Gondwanan margin and has implications for the origin of the coeval oceanic Devonian mafic rocks currently exposed in the Variscan suture of NW Iberia.

Aeromagnetic survey map of the central California Coast Ranges

USGS Publications Warehouse

Langenheim, V.E.; Jachens, R.C.; Moussaoui, K.

2009-01-01

This aeromagnetic survey was flown as part of a Cooperative Research and Development Agreement (CRADA) with the Pacific Gas and Electric Company and is intended to promote further understanding of the geology and structure in the central California Coast Ranges by serving as a basis for geophysical interpretations and by supporting geological mapping, mineral and water resource investigations, and other topical studies. Local spatial variations in the Earth's magnetic field (evident as anomalies on aeromagnetic maps) reflect the distribution of magnetic minerals, primarily magnetite, in the underlying rocks. In many cases the volume content of magnetic minerals can be related to rock type, and abrupt spatial changes in the amount of magnetic minerals can commonly mark lithologic or structural boundaries. Bodies of serpentinite and other mafic and ultramafic rocks tend to produce the most intense magnetic anomalies, but such generalizations must be applied with caution because rocks with more felsic compositions, such as the porphyritic granodiorite-granite of the La Panza Range, and even some sedimentary units, also can cause measurable magnetic anomalies.

Impact of the Middle East War of 1967 on European Perceptions of U.S. and Soviet Power

DTIC Science & Technology

1976-01-01

basic sources of elite identity in British politics is the shared Oxford and Cambridge background of men in both Westminister (Parliament) and...the United Stateb had special legislative authority for sharing certain nuclear information whereas with the French no such authority existed. When...seen little to gain by "rocking the boat." Within the framework of progressive labor legislation (under the Christian Demo- crats as well as under the

Navigating between a Rock and a Hard Place: Lessons from an Urban School Teacher

ERIC Educational Resources Information Center

Eslinger, James C.

2014-01-01

The educational accountability movement in the United States under No Child Left Behind has negatively affected urban teachers because of high-stakes testing, narrowed curriculum, and scripted pedagogy. Such conditions have led to teacher stress, burnout, and attrition. Missing from the scholarly literature are the ways in which teachers work to…

Very early Archean crustal-accretion complexes preserved in the North Atlantic craton

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nutman, A.P.; Collerson, K.D.

1991-08-01

The North Atlantic craton contains very early Archean supracrustal rocks, orthogneisses, and massive ultramafic rocks. Most units of supracrustal rocks are dominated by mafic volcanic rocks, layered gabbros, and banded iron formations, bust some also contain abundant felsic volcanic-sedimentary rocks, quartzites, and marbles. Some quartzites contain detrital zircons derived from rocks identical in age to felsic volcanic-sedimentary rocks in these sequences (ca. 3800 Ma) and also from older (ca. 3850 Ma) sources. The presence of the ca. 3850 Ma detrital zircons suggests that the supracrustal units containing them were deposited on, or close to, ca. 3850 Ma sialic crust. Themore » massive ultramafic rocks have chemical affinities to upper mantle rocks. The voluminous suites of tonalitic gneisses are dominated by 3700-3730 Ma bodies that intrude the supracrustal sequences, but they also locally contain components with ages between 3820 and 3920 Ma. The diverse supracrustal units, upper mantle rocks, and {ge} 3820 Ma components in the gneisses were tectonically interleaved in very early Archean convergent plate boundaries, giving rise to accretion complexes. In the period 3700-3730 Ma, voluminous tonalitic magmas produced by partial melting of predominantly mafic rocks in the base of the accretion complexes were emplaced at higher levels, forming juvenile continental crust and leaving behind a refractory lower crustal to upper mantle substrate.« less

Neogene Gas Total Petroleum System -- Neogene Nonassociated Gas Assessment Unit of the San Joaquin Basin Province: Chapter 22 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

USGS Publications Warehouse

Hosford Scheirer, Allegra; Magoon, Leslie B.

2009-01-01

The Neogene Nonassociated Gas Assessment Unit (AU) of the Neogene Total Petroleum System consists of nonassociated gas accumulations in Pliocene marine and brackish-water sandstone located in the south and central San Joaquin Basin Province (Rudkin, 1968). Traps consist mainly of stratigraphic lenses in low-relief, elongate domes that trend northwest-southeast. Reservoir rocks typically occur as sands that pinch out at shallow depths (1,000 to 7,500 feet) within the Etchegoin and San Joaquin Formations. Map boundaries of the assessment unit are shown in figures 22.1 and 22.2; this assessment unit replaces the Pliocene Nonassociated Gas play 1001 (shown by purple line in fig. 22.1) considered by the U.S. Geological Survey (USGS) in its 1995 National Assessment (Beyer, 1996). The AU is drawn to include all existing fields containing nonassociated gas accumulations in the Pliocene to Pleistocene section, as was done in the 1995 assessment, but it was greatly expanded to include adjacent areas believed to contain similar source and reservoir rock relationships. Stratigraphically, the AU extends from the topographic surface to the base of the Etchegoin Formation (figs. 22.3 and 22.4). The boundaries of the AU explicitly exclude gas accumulations in Neogene rocks on the severely deformed west side of the basin and gas accumulations in underlying Miocene rocks; these resources, which primarily consist of a mixture of mostly thermogenic and some biogenic gas, are included in two other assessment units. Lillis and others (this volume, chapter 10) discuss the geochemical characteristics of biogenic gas in the San Joaquin Basin Province. Primary fields in the assessment unit are defined as those containing hydrocarbon resources greater than the USGS minimum threshold for assessment—3 billion cubic feet (BCF) of gas; secondary fields contain smaller volumes of gas but constitute a significant show of hydrocarbons. Although 12 fields meet the 3 BCF criterion for inclusion in the AU, only 5 fields were considered at the time of assessment.

Geochemical, isotopic, and dissolved gas characteristics of groundwater in a fractured crystalline-rock aquifer, Savage Municipal Well Superfund site, Milford, New Hampshire, 2011

USGS Publications Warehouse

Harte, Philip T.

2013-01-01

Tetrachloroethylene (PCE), a volatile organic compound, was detected in groundwater from deep (more than (>) 300 feet (ft) below land surface) fractures in monitoring wells tapping a crystalline-rock aquifer beneath operable unit 1 (OU1) of the Savage Municipal Well Superfund site (Weston, Inc., 2010). Operable units define remedial areas of contaminant concern. PCE contamination within the fractured-rock aquifer has been designated as a separate operable unit, operable unit 3 (OU3; Weston, Inc., 2010). PCE contamination was previously detected in the overlying glacial sand and gravel deposits and basal till, hereafter termed the Milford-Souhegan glacial-drift (MSGD) aquifer (Harte, 2004, 2006). Operable units 1 and 2 encompass areas within the MSGD aquifer, whereas the extent of the underlying OU3 has yet to be defined. The primary original source of contamination has been identified as a former manufacturing facility—the OK Tool manufacturing facility; hence OU1 sometimes has been referred to as the OK Tool Source Area (New Hampshire Department of Environmental Services, undated). A residential neighborhood of 30 to 40 houses is located in close proximity (one-quarter of a mile) from the PCE-contaminated monitoring wells. Each house has its own water-supply well installed in similar rocks as those of the monitoring wells, as indicated by the New Hampshire State geologic map (Lyons and others, 1997). An investigation was initiated in 2010 by the U.S. Environmental Protection Agency (USEPA) region 1, and the New Hampshire Department of Environmental Services (NHDES) to assess the potential for PCE transport from known contaminant locations (monitoring wells) to the residential wells. The U.S. Geological Survey (USGS) and the NHDES entered into a cooperative agreement in 2011 to assist in the evaluation of PCE transport in the fractured-rock aquifer. Periodic sampling over the last decade by the USEPA and NHDES has yet to detect PCE in groundwater from the residential-supply wells (as of 2012). However, part of assessing the potential for PCE transport involves understanding the origin of the groundwater in the monitoring and residential wells. One of the tools in delineating the movement of groundwater to wells, particularly in complex, highly heterogeneous fractured-rock aquifers, is the understanding of the geochemical and isotopic composition of groundwater (Lipfert and Reeve, 2004; Harte and others, 2012). This report summarizes findings from analyses of geochemical, isotopic, and dissolved gas characteristics of groundwater. Samples of groundwater were collected in 2011 from monitoring wells and nearby residential-supply wells in proximity to OU1.

Crew Earth Observations (CEO) taken during Expedition 9

NASA Image and Video Library

2004-06-18

ISS009-E-12441 (18 June 2004) --- Gebel (or Mount) Edmonstone is featured in this image photographed by an Expedition 9 crewmember on the International Space Station (ISS). Mount Edmonstone is a flat-topped mesa located near the Dahkla Oasis south of Cairo, Egypt. Gebel Edmonstone is a remnant of an eroding scarp that extends for over 200 kilometers (125 miles) east-southeast to west-northwest (visible in the upper left corner of this image). The flat caprock of both the scarp and Mount Edmonstone is chalky limestone underlain by fossil-bearing shale and fine-grained sedimentary rocks. This photograph has been “stretched” to enhance color variations in the various rock and soil units. The color variations reflect differences in composition (or weathering) of the various rock units. The limestone unit capping Gebel Edmonstone and the adjacent scarp ranges from white to gray in color, while the underlying fine-grained sedimentary layers are blue-gray. Hill slope pathways for sediment movement down slope are clearly visible as brown to tan streamers originating from Gebel Edmonstone. Barchan dune fields are also visible in this color-enhanced image, and are distinct due to their mineralogical composition. Evaporite deposits are bright white, while vegetated portions of the Oasis— mostly agricultural fields—are dark blue-black. This additional information obtained from image enhancement can be used for geologic mapping and investigation of surficial processes operating in the region.

Geology of Paleozoic Rocks in the Upper Colorado River Basin in Arizona, Colorado, New Mexico, Utah, and Wyoming, Excluding the San Juan Basin

USGS Publications Warehouse

Geldon, Arthur L.

2003-01-01

The geology of the Paleozoic rocks in the Upper Colorado River Basin in Arizona, Colorado, New Mexico, Utah, and Wyoming, was studied as part of the U.S. Geological Survey's Regional Aquifer-System Analysis Program to provide support for hydrogeological interpretations. The study area is segmented by numerous uplifts and basins caused by folding and faulting that have recurred repeatedly from Precambrian to Cenozoic time. Paleozoic rocks in the study area are 0-18,000 feet thick. They are underlain by Precambrian igneous, metamorphic, and sedimentary rocks and are overlain in most of the area by Triassic formations composed mostly of shale. The overlying Mesozoic and Tertiary rocks are 0-27,000 feet thick. All Paleozoic systems except the Silurian are represented in the region. The Paleozoic rocks are divisible into 11 hydrogeologic units. The basal hydrogeologic unit consisting of Paleozoic rocks, the Flathead aquifer, predominantly is composed of Lower to Upper Cambrian sandstone and quartzite. The aquifer is 0-800 feet thick and is overlain gradationally to unconformably by formations of Cambrian to Mississippian age. The Gros Ventre confining unit consists of Middle to Upper Cambrian shale with subordinate carbonate rocks and sandstone. The confining unit is 0-1,100 feet thick and is overlain gradationally to unconformably by formations of Cambrian to Mississippian age. The Bighom aquifer consists of Middle Cambrian to Upper Ordovician limestone and dolomite with subordinate shale and sandstone. The aquifer is 0-3,000 feet thick and is overlain unconformably by Devonian and Mississipplan rocks. The Elbert-Parting confining unit consists of Lower Devonian to Lower Mississippian limestone, dolomite, sandstone, quartzite, shale, and anhydrite. It is 0-700 feet thick and is overlain conformably to unconformably by Upper Devonian and Mississippian rocks. The Madison aquifer consists of two zones of distinctly different lithology. The lower (Redwall-Leadville) zone is 0-2,500 feet thick and is composed almost entirely of Upper Devonian to Upper Mississippian limestone, dolomite, and chert. The overlying (Darwin-Humbug) zone is 0-800 feet thick and consists of Upper Mississippian limestone, dolomite, sandstone, shale, gypsum, and solution breccia. The Madison aquifer is overlain conformably by Upper Mississippian and Pennsylvanian rocks. The Madison aquifer in most areas is overlain by Upper Mississippian to Middle Pennsylvanian rocks of the Four Comers confining unit. The lower part of this confining unit, the Belden-Molas subunit, consists of as much as 4,300 feet of shale with subordinate carbonate rocks, sandstone, and minor gypsum. The upper part of the confining unit, the Paradox-Eagle Valley subunit, in most places consists of as much as 9,700 feet of interbedded limestone, dolomite, shale, sandstone, gypsum, anhydrite, and halite. Locally, the evaporitic rocks are deformed into diapirs as much as 15,000 feet thick. The Four Corners confining unit is overlain gradationally to disconformably by Pennsylvanian rocks. The uppermost Paleozoic rocks comprise the Canyonlands aquifer, which is composed of three zones with distinctly different lithologies. The basal (Cutler-Maroon) zone consists of as much as 16,500 feet of Lower Pennsylvanian to Lower Permian sandstone, conglomerate, shale, limestone, dolomite, and gypsum. The middle (Weber-De Chelly) zone consists of as much as 4,000 feet of Middle Pennsylvanian to Lower Permian quartz sandstone with minor carbonate rocks and shale. The upper (Park City-State Bridge) zone consists of as much as 800 feet of Lower to Upper Permian limestone, dolomite, shale, sandstone, phosphorite, chert, and gypsum. The Canyonlands aquifer is overlain disconformably to unconformably by formations of Triassic and Jurassic age.

Seastacks buried beneath newly reported Lower Miocene sandstone, northern Santa Barbara County, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fritsche, A.E.; Hanna, F.M.

1985-04-01

Three large, isolated exposures of a light-gray, coarse-grained, thick-bedded sandstone unit occur in the northern San Rafael Mountains of Santa Barbara County, California. These rocks are moderately fossiliferous and contain Vertipecten bowersi, Amussiopecten vanvlecki, Aequipecten andersoni, Otrea howelli, shark teeth, whale bones, and regular echinoid spines. The fossils indicate that the sandstone unit, although previously reported as upper(.) Miocene, correlates best with the lower Miocene Vaqueros Formation. This unit was deposited in angular unconformity on a Cretaceous, greenish-gray turbidite sequence of interbedded sandstone and shale, and onlaps the unconformity erosion surface from west to east, the unit being thicker inmore » the west and older at its base. The underlying Cretaceous sandstone beds are well indurated, and during the eastward transgression of the early Miocene sea, they resisted wave erosion and stood as seastacks offshore of the advancing coastline, thus creating a very irregular topographic surface upon which the Vaqueros Formation was deposited. Some seastacks were as much as 4 m tall, as indicated by inliers of Cretaceous rock surrounded by 4-m thick sections of the Vaqueros Formation.« less

Application of geologic map information to water quality issues in the southern part of the Chesapeake Bay watershed, Maryland and Virginia, eastern United States

USGS Publications Warehouse

McCartan, L.; Peper, J.D.; Bachman, L.J.; Horton, J. Wright

1999-01-01

Geologic map units contain much information about the mineralogy, chemistry, and physical attributes of the rocks mapped. This paper presents information from regional-scale geologic maps in Maryland and Virginia, which are in the southern part of the Chesapeake Bay watershed in the eastern United States. The geologic map information is discussed and analyzed in relation to water chemistry data from shallow wells and stream reaches in the area. Two environmental problems in the Chesapeake Bay watershed are used as test examples. The problems, high acidity and high nitrate concentrations in streams and rivers, tend to be mitigated by some rock and sediment types and not by others. Carbonate rocks (limestone, dolomite, and carbonate-cemented rocks) have the greatest capacity to neutralize acidic ground water and surface water in contact with them. Rocks and sediments having high carbon or sulfur contents (such as peat and black shale) potentially contribute the most toward denitrification of ground water and surface water in contact with them. Rocks and sediments that are composed mostly of quartz, feldspar, and light-colored clay (rocks such as granite and sandstone, sediments such as sand and gravel) tend not to alter the chemistry of waters that are in contact with them. The testing of relationships between regionally mapped geologic units and water chemistry is in a preliminary stage, and initial results are encouraging.Geologic map units contain much information about the mineralogy, chemistry, and physical attributes of the rocks mapped. This paper presents information from regional-scale geologic maps in Maryland and Virginia, which are in the southern part of the Chesapeake Bay watershed in the eastern United States. The geologic map information is discussed and analyzed in relation to water chemistry data from shallow wells and stream reaches in the area. Two environmental problems in the Chesapeake Bay watershed are used as test examples. The problems, high acidity and high nitrate concentrations in streams and rivers, tend to be mitigated by some rock and sediment types and not by others. Carbonate rocks (limestone, dolomite, and carbonate-cemented rocks) have the greatest capacity to neutralize acidic ground water and surface water in contact with them. Rocks and sediments having high carbon or sulfur contents (such as peat and black shale) potentially contribute the most toward denitrification of ground water and surface water in contact with them. Rocks and sediments that are composed mostly of quartz, feldspar, and light-colored clay (rocks such as granite and sandstone, sediments such as sand and gravel) tend not to alter the chemistry of waters that are in contact with them. The testing of relationships between regionally mapped geologic units and water chemistry is in a preliminary stage, and initial results are encouraging.

Use of variations in unit cell length, reflectance and hardness for determining the origin of Fe disulphides in sedimentary rocks

NASA Astrophysics Data System (ADS)

Dill, H. G.; Eberhard, E.; Hartmann, B.

1997-01-01

Fe disulphides are common opaque accessories in sedimentary rocks. Both marcasite and pyrite may shed some light on the depositional environment and help determine the diagenesis of their host rocks. Quantitative ore microscopy (reflectance measurements, Vickers hardness numbers) and X-ray diffraction methods, supplemented with scanning electron microscopy and chemical analyses, were applied to pyrite (and some marcasite) hosted by sedimentary rocks spanning the interval from the Devonian to the Pliocene, and formed in various marine and continental environments. Quantitative ore microscopy of pyrites of sedimentary origin does not seem to be an efficient tool for analyzing the environment owing to the inhomogeneous nature of sulphide aggregates when viewed under the ore microscope, and the variable amounts of minor elements (e.g., As, Ni, and Co) that control the reflectance values (RV) and Vickers hardness numbers (VHN) of the host sulphides. However, such parameters as crystal habit and unit cell length of pyrite, which correlate with FeS x, are useful for environmental analysis. The redox conditions and the presence of organic remains during formation are the main factors determining these crystallographic parameters. Differences in these parameters from those of pure, ideal FeS 2 can be related to substitution of, e.g., wustite in the pyrite lattice, reflecting moderate oxidation (i.e. in the microenvironment). As far as crystal habit and length of the cell edge are concerned, late stage diagenesis is obviously less important than the microenvironment attending initial formation. The environment of deposition (i.e. the macroenvironment) of pyrite-bearing rocks has no influence on the crystal morphology or the length of the unit cell of Fe disulphide. X-ray diffraction measurements demonstrate that this method provides useful evidence on the microenvironment of sulphide precipitation around a single, equant pyrite, as well as around pyritized fossils.

Late Neoproterozoic basement rocks of Meatiq area, Central Eastern Desert, Egypt: Petrography and remote sensing characterizations

NASA Astrophysics Data System (ADS)

Hassan, Safaa M.; El kazzaz, Yahiya A.; Taha, Maysa M. N.; Mohammad, Abdullah T.

2017-07-01

Meatiq dome is one of the mysteries of the basement rocks in Central Eastern Desert (CED) of Egypt. Its mode of formation, and tectonic evolution are still controversial and not fully understood. Satellite remote sensing is a powerful tool for geologic applications, especially in inaccessible regions of the Earth's surface. In this study, three proposed Landsat-8 band ratios (6/2, 6/7, (6/4*4/3)), (6/7, 6/4, 4/2), and (7/5, 7/6, 5/3) are successfully used for detailed geological mapping of the different lithological rock units exposed in Meatiq dome area in the CED. Landsat-8 Principal component (PC) images is also used for refinement the boundaries between the widely-exposed rock units in the study area. Fourteen spectral bands of Advanced Space borne Thermal Emission and Reflection Radiometer (ASTER) data are successfully used to emphasize the distribution of some rock forming minerals (i.e. muscovite, quartz, ferrous oxides, ferrous silicates and hydroxyl-bearing minerals) in the lithological rock units of Meatiq dome area. ASTER muscovite index (B7/B6) and quartz index (B14/B12), ferrous iron index (B5/B3), ferrous silicates index (B5/B4), mafic index (B12/B13) and hydroxyl-bearing minerals index ((B7/B6)*(B4/B6)) discriminate muscovite bearing rocks, Granitoids, and other felsic rocks, amphibolite and other mafic rocks. The proposed image processing methods effectively discriminates between four granitic varieties existed in Meatiq area. They are namely; Abu Ziran, Ariki, Fawakhir and Atalla Plutons. This study reveals that the applied data of ASTER and Landsat-8 enhanced images produced a modified geological map with well emphasized rock units which are verified with field observations, and petrographic study.

Mars Exploration Rover APXS Results from Matijevic Hill

NASA Technical Reports Server (NTRS)

Cohen, B. A.; Clark, B. C.; Gellert, R.; Klingelhoefer, G.; Ming, D. W.; Mittlefehldt, D. W.; Morris, R. V.; Schrader, C. M.; Schroeder, C.; Yen, A. S.;

NASA "Rocks" Problem-Based Learning

ERIC Educational Resources Information Center

Johnson, Carla J.

2004-01-01

A rock investigation set up as a problem-based learning mini-unit for the author's seventh grade integrated science students. To start this unit, she explains to students that NASA has sent us a container of rocks that they would like to have identified. It is up to the students to assume the role of geologists and come up with some way to…

Water availability and flood hazards in the John Day Fossil Beds National Monument, Oregon

USGS Publications Warehouse

Frank, Frank J.; Oster, E.A.

1979-01-01

The rock formations of the John Day Fossil Beds National Monument area are aquifers that can be expected to yield less than 10 gallons of water per minute to wells. The most permeable of the geologic units is the alluvium that occurs at low elevations along the John Day River and most of the smaller streams. Wells in the alluvial deposits can be expected to yield adequate water supplies for recreational areas; also, wells completed in the underlying bedrock at depths ranging from 50 to 200 feet could yield as much as 10 gallons per minute. Pumping tests on two unused wells indicated yields of 8 gallons per minute and 2 gallons per minute. Nine of the ten springs measured in and near the monument area in late August of 1978 were flowing 0.2 to 30 gallons per minute. Only the Cant Ranch spring and the Johnny Kirk Spring near the Sheep Rock unit had flows exceeding 6 gallons per minute. Chemical analyses of selected constituents of the ground water indicated generally low concentrations of dissolved minerals. Although cloudbursts in the Painted Hills unit could generate a flood wave on the valley floors, flood danger can be reduced by locating recreational sites on high ground. The campground in Indian Canyon of the Clarno unit is vulnerable to cloudburst flooding. About 80 percent of the proposed campground on the John Day River in the Sheep Rock unit is above the estimated level of 1-percent chance flood (100-year flood) of the river. The 1-percent chance flood would extend about 120 feet from the riverbank into the upstream end of the campground. (USGS).

Geophysical expression of a buried niobium and rare earth element deposit: the Elk Creek carbonatite, Nebraska, USA

USGS Publications Warehouse

Drenth, Benjamin J.

2014-01-01

The lower Paleozoic Elk Creek carbonatite is a 6–8-km-diameter intrusive complex buried under 200 m of sedimentary rocks in southeastern Nebraska. It hosts the largest known niobium deposit in the U.S. and a rare earth element (REE) deposit. The carbonatite is composed of several lithologies, the relations of which are poorly understood. Niobium mineralization is most enriched within a magnetite beforsite (MB) unit, and REE oxides are most concentrated in a barite beforsite unit. The carbonatite intrudes Proterozoic country rocks. Efforts to explore the carbonatite have used geophysical data and drilling. A high-resolution airborne gravity gradient and magnetic survey was flown over the carbonatite in 2012. The carbonatite is associated with a roughly annular vertical gravity gradient high and a subdued central low and a central magnetic high surrounded by magnetic field values lower than those over the country rocks. Geophysical, borehole, and physical property data are combined for an interpretation of these signatures. The carbonatite is denser than the country rocks, explaining the gravity gradient high. Most carbonatite lithologies have weaker magnetic susceptibilities than those of the country rocks, explaining why the carbonatite does not produce a magnetic high at its margin. The primary source of the central magnetic high is interpreted to be mafic rocks that are strongly magnetized and are present in large volumes. MB is very dense (mean density 3200  kg/m3) and strongly magnetized (median 0.073 magnetic susceptibility), producing a gravity gradient high and contributing to the aeromagnetic high. Barite beforsite has physical properties similar to most of the carbonatite volume, making it a poor geophysical target. Geophysical anomalies indicate the presence of dense and strongly magnetized rocks at depths below existing boreholes, either a large volume of MB or another unknown lithology.

Three-dimensional geologic model of the Arbuckle-Simpson aquifer, south-central Oklahoma

USGS Publications Warehouse

Faith, Jason R.; Blome, Charles D.; Pantea, Michael P.; Puckette, James O.; Halihan, Todd; Osborn, Noel; Christenson, Scott; Pack, Skip

2010-01-01

The Arbuckle-Simpson aquifer of south-central Oklahoma encompasses more than 850 square kilometers and is the principal water resource for south-central Oklahoma. Rock units comprising the aquifer are characterized by limestone, dolomite, and sandstones assigned to two lower Paleozoic units: the Arbuckle and Simpson Groups. Also considered to be part of the aquifer is the underlying Cambrian-age Timbered Hills Group that contains limestone and sandstone. The highly faulted and fractured nature of the Arbuckle-Simpson units and the variable thickness (600 to 2,750 meters) increases the complexity in determining the subsurface geologic framework of this aquifer. A three-dimensional EarthVision (Trademark) geologic framework model was constructed to quantify the geometric relationships of the rock units of the Arbuckle-Simpson aquifer in the Hunton anticline area. This 3-D EarthVision (Trademark) geologic framework model incorporates 54 faults and four modeled units: basement, Arbuckle-Timbered Hills Group, Simpson Group, and post-Simpson. Primary data used to define the model's 54 faults and four modeled surfaces were obtained from geophysical logs, cores, and cuttings from 126 water and petroleum wells. The 3-D framework model both depicts the volumetric extent of the aquifer and provides the stratigraphic layer thickness and elevation data used to construct a MODFLOW version 2000 regional groundwater-flow model.

The Kingak shale of northern Alaska-regional variations in organic geochemical properties and petroleum source rock quality

USGS Publications Warehouse

Magoon, L.B.; Claypool, G.E.

1984-01-01

The Kingak Shale, a thick widespread rock unit in northern Alaska that ranges in age from Early Jurassic through Early Cretaceous, has adequate to good oil source rock potential. This lenticular-shaped rock unit is as much as 1200 m thick near the Jurassic shelf edge, where its present-day burial depth is about 5000 m. Kingak sediment, transported in a southerly direction, was deposited on the then marine continental shelf. The rock unit is predominantly dark gray Shale with some interbeds of thick sandstone and siltstone. The thermal maturity of organic matter in the Kingak Shale ranges from immature (2.0%R0) in the Colville basin toward the south. Its organic carbon and hydrogen contents are highest in the eastern part of northern Alaska south of and around the Kuparuk and Prudhoe Bay oil fields. Carbon isotope data of oils and rock extracts indicate that the Kingak Shale is a source of some North Slope oil, but is probably not the major source. ?? 1984.

Meso to Neoproterozoic layered mafic-ultramafic rocks from the Virorco back-arc intrusion, Argentina

NASA Astrophysics Data System (ADS)

Ferracutti, Gabriela; Bjerg, Ernesto; Hauzenberger, Christoph; Mogessie, Aberra; Cacace, Francisco; Asiain, Lucía

2017-11-01

The Virorco layered mafic-ultramafic intrusion is part of a belt that extends over 100 km from NE to SW in the Eastern Sierras Pampeanas of San Luis, Argentina. The rocks of this belt carry a Fe-Cu-Ni sulphide mineralization in veins and as disseminated and massive ore. Platinum group minerals are associated with the sulphides. The Virorco intrusion exhibits modal, textural and cryptic layering. New results allow the characterization of six layered units (Modal Layered Unit, Pyroxenitic Macro-Layered Unit, Gabbroic Unit, Banded Unit, Hornblende Norite Unit and Gabbronorite Unit) present in three sectors of the intrusion (Eastern, Central and Western). The units from the Western Sector (Banded Unit, Hornblende Norite Unit and Gabbronorite Unit) and the Modal Layered Unit from the Eastern Sector belong to the Marginal Border Series of the intrusion. Meanwhile, the Central sector units (Pyroxenitic Macro-Layered Unit and Gabbroic Unit) are from the Layered Series. The presence of crescumulate texture (Modal Layered Unit) and colloform banding (Banded Unit) are evidences of "in situ" crystallization due to supercooling of a MgO-rich hydrated mafic magma, where cooling proceeded from the walls towards the interior of the magma chamber. In previous studies the mafic-ultramafic rocks have been considered to be Cambrian to Ordovician. Here we present a Sm-Nd whole rock isochron which shows that the formation age of these intrusions is 1002 ± 150 Ma and that the protolith age of the Pringles Metamorphic Complex metasedimentary rocks is 1289 ± 97 Ma. Our study also indicates that the San Luis mafic-ultramafic layered intrusives most probably formed in a back-arc tectonic setting, from an enriched sub-continental mantle, influenced by a subducting slab and/or crust injection into the Pampia Terrane prior to its collision with the Rio de la Plata Craton.

Numerical analysis of the hydrogeologic controls in a layered coastal aquifer system, Oahu, Hawaii, USA

USGS Publications Warehouse

Oki, D.S.; Souza, W.R.; Bolke, E.L.; Bauer, G.R.

1998-01-01

The coastal aquifer system of southern Oahu, Hawaii, USA, consists of highly permeable volcanic aquifers overlain by weathered volcanic rocks and interbedded marine and terrestrial sediments of both high and low permeability. The weathered volcanic rocks and sediments are collectively known as caprock, because they impede the free discharge of groundwater from the underlying volcanic aquifers. A cross-sectional groundwater flow and transport model was used to evaluate the hydrogeologic controls on the regional flow system in southwestern Oahu. Controls considered were: (a) overall caprock hydraulic conductivity; and (b) stratigraphic variations of hydraulic conductivity in the caprock. Within the caprock, variations in hydraulic conductivity, caused by stratigraphy or discontinuities of the stratigraphic units, are a major control on the direction of groundwater flow and the distribution of water levels and salinity. Results of cross-sectional modeling confirm the general groundwater flow pattern that would be expected in a layered coastal system. Ground-water flow is: (a) predominantly upward in the low-permeability sedimentary units; and (b) predominantly horizontal in the high-permeability sedimentary units.

The petrology, structure and geochemistry of an Archean terrane in the North Snowy Block, Beartooth Mountains, Montana

NASA Astrophysics Data System (ADS)

Mogk, D. W.

1984-12-01

Six major rock units in the North Snowy Block in an Archean mobile belt are recognized between all units representing discontinuities in metamorphic grade, structural style, geochemistry, and isotopic ages. Four of the units occur in NE trending linear belts; the Basement Gneiss; the phyllitic Davis Creek Schist; the mount cowen augen gneis; the Paragneiss unit. Overlying the linear units is the 3.2 Ga old Pine Creek Nappe Complex, an isoclinally folded, middle to upper amphibolite facies, thrust nappe consisting of the Barney Creek Amphibolite, George Lake Marble and Jewel Quartzite. The highest structural units, including a thick sequence of upper amphibolite grade supracrustal rocks and a lower section of injected 3.4 Ga old granitic to tonalitic migmatitic rocks were emplaced on the Columbine Thrust. It is shown that there was secular variation in tectonic style in the Archean of southwest Montana. Three stages are recognized: (1) melting of ancient matic crust produced trondhjemitic continental nuclei; (2) numerous ensialic basins were created and destroyed, resulting in high grade metamorphism and mignatization of supracrustal rocks; and (3) contemporary style plate tectonics resulted in generation of large volumes of andesities and calc-alkaline granitic rocks, transcurrent faulting, and thrust faulting.

Diggers to Divers, Geology K-6; Elementary Science Unit No. 2.

ERIC Educational Resources Information Center

Bethlehem Area Schools, PA.

This curriculum guide, part of a series of science units, stresses concept-learning through the discovery approach and child-centered activities. It is intended that the unit will be studied in depth by grades 3, 4, 5, and 6. Kindergarten pupils will study the unit in less detail. "Our Useful Rocks" is studied in the kindergarten, "Rocks - Then…

Turning Bread into Rocks: A Multisensory Unit Opener.

ERIC Educational Resources Information Center

Smith, Shaw

2000-01-01

Presents an earth science activity on rocks to demonstrate the vital links between minerals and rocks. Uses different kinds of breads to demonstrate that rocks, like breads, are composed of various ingredients in different proportions. (ASK)

Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs Wash volcanic centers, Southern Nevada

NASA Technical Reports Server (NTRS)

Taranik, James V.; Hsu, Liang C.; Spatz, David

1988-01-01

Comparative lab spectra and Thematic Mapper imagery investigations at 3 Tertiary calderas in southern Nevada indicate that desert varnish is absorbant relative to underlying host rocks below about 0.7 to 1.3 microns, depending on mafic affinity of the sample, but less absorbant than mafic host rocks at higher wavelengths. Desert varnish occurs chiefly as thin impregnating films. Distribution of significant varnish accumulations is sparse and localized, occurring chiefly in surface recesses. These relationships result in the longer wavelength bands and high 5/2 values over felsic units with extensive desert varnish coatings. These lithologic, petrochemical, and desert varnish controlled spectral responses lead to characteristic TM band relationships which tend to correlate with conventionally mappable geologic formations. The concept of a Rock-Varnish Index (RVI) is introduced to help distinguish rocks with a potentially detectable varnish. Felsic rocks have a high RVI, and those with extensive desert varnish behave differently, spectrally, from those without extensive varnish. The spectrally distinctive volcanic formations at Stonewall Mountain provide excellent statistical class segregation on supervised classification images. A binary decision rule flow-diagram is presented to aid TM imagery analysis over volcanic terrane in semi-arid environments.

Assessment of Coalbed Gas Resources in Cretaceous and Tertiary Rocks on the North Slope, Alaska, 2006

USGS Publications Warehouse

Roberts, Steve; Barker, Charles E.; Bird, Kenneth J.; Charpentier, Ronald R.; Cook, Troy; Houseknecht, David W.; Klett, Timothy R.; Pollastro, Richard M.; Schenk, Christopher J.

2006-01-01

The North Slope of Alaska is a vast area of land north of the Brooks Range, extending from the Chukchi Sea eastward to the Canadian border. This Arctic region is known to contain extensive coal deposits; hypothetical coal resource estimates indicate that nearly 4 trillion short tons of coal are in Cretaceous and Tertiary rocks. Because of the large volume of coal, other studies have indicated that this region might also have potential for significant coalbed gas resources. The present study represents the first detailed assessment of undiscovered coalbed gas resources beneath the North Slope by the USGS. The assessment is based on the total petroleum system (TPS) concept. Geologic elements within a TPS relate to hydrocarbon source rocks (maturity, hydrocarbon generation, migration), the characteristics of reservoir rocks, and trap and seal formation. In the case of coalbed gas, the coal beds serve as both source rock and reservoir. The Brookian Coalbed Gas Composite TPS includes coal-bearing rocks in Cretaceous and Tertiary strata underlying the North Slope and adjacent Alaska State waters. Assessment units (AUs) within the TPS (from oldest to youngest) include the Nanushuk Formation Coalbed Gas AU, the Prince Creek and Tuluvak Formations Coalbed Gas AU, and the Sagavanirktok Formation Coalbed Gas AU.

Distribution, richness, quality, and thermal maturity of source rock units on the North Slope of Alaska

USGS Publications Warehouse

Peters, K.E.; Bird, K.J.; Keller, M.A.; Lillis, P.G.; Magoon, L.B.

2003-01-01

Four source rock units on the North Slope were identified, characterized, and mapped to better understand the origin of petroleum in the area: Hue-gamma ray zone (Hue-GRZ), pebble shale unit, Kingak Shale, and Shublik Formation. Rock-Eval pyrolysis, total organic carbon analysis, and well logs were used to map the present-day thickness, organic quantity (TOC), quality (hydrogen index, HI), and thermal maturity (Tmax) of each unit. To map these units, we screened all available geochemical data for wells in the study area and assumed that the top and bottom of the oil window occur at Tmax of ~440° and 470°C, respectively. Based on several assumptions related to carbon mass balance and regional distributions of TOC, the present-day source rock quantity and quality maps were used to determine the extent of fractional conversion of the kerogen to petroleum and to map the original organic richness prior to thermal maturation.

Rock-Mechanics Research. A Survey of United States Research to 1965, with a Partial Survey of Canadian Universities.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC.

The results of a survey, conducted by the Committee on Rock Mechanics, to determine the status of training and research in rock mechanics in presented in this publication. In 1964 and 1965 information was gathered by questionnaires sent to industries, selected federal agencies, and universities in both the United States and Canada. Results are…

Volcanic rocks of the McDermitt Caldera, Nevada-Oregon

USGS Publications Warehouse

Greene, Robert C.

1976-01-01

The McDermitt caldera, a major Miocene eruptive center is locatedin the northernmost Great Basin directly west of McDermitt, Nev. The alkali rhyolite of Jordan Meadow was erupted from the caldera and covered an area of about 60,000 sq km; the volume of rhyolite is about 960 cubic km. Paleozoic and Mesozoic sedimentary rocks and Mesozoic granodiorite form the pre-Tertiary Basement in this area.. Overlying these is a series of volcanic rocks, probably all of Miocene age. The lowest is a dacite welded tuff, a reddish-brown rock featuring abundant phenocrysts of plagioclase, hornblende, and biotite; next is a heterogeneous unit consisting of mocks ranging from basalt to dacite. Overlying these is the basalt and andesite of Orevada View, over 700 m thick and consisting of a basal unit of cinder agglutinate overlain by basalt and andesite, much of which contains conspicuous large plagioclase phenocrysts. Near Disaster Peak and Orevada View, the basalt and andesite are overlain by additional units of silicic volcanic rocks. The lower alkali rhyolite welded tuff contains abundant phenocrysts of alkali feldspar and has a vitric phase with obvious pumice and shard texture. The rhyolite of Little Peak consists of a wide variety of banded flows or welded ruffs and breccias, mostly containing abundant alkali feldspar phenocrysts. It extends south from Disaster Peak and apparently underlies the alkali rhyolite of Jordan Meadow. The quartz latite of Sage Creek lies north of Disaster Peak and consists mostly of finely mottled quartz latite with sparse minute plagioclase phenocrysts. Volcanic rock units in the east part of the area near the Cordero mine include trachyandesite, quartz labile of McConnell Canyon, and rhyolite of McCormick Ranch. The trachyandesite is dark gray and contains less than 1 percent microphenocrysts plagioclase. It is the lowest unit exposed and may correlate with part of the basalt and andesite of Orevada View. The quartz latite of McConnell Canyon is olive gray and contains about 8 percent plagioclase phenocrysts. It has an upper phase of black vitrophyre which directly underlies The alkali rhyolite of Jordan Meadow. The rhyolite of McCormick Ranch is present farther north and consists of pinkish rhyolite with small amounts of phenocrysts of alkali feldspar, quartz, and plagioclase. The alkali rhyolite of Jordan Meadow consists of interlayered aphyric, sparsely porphyritic, and abundantly porphyritic alkali rhyolites whose colors are predominantly light gray, greenish gray, and brown, respectively. Phenocrysts are alkali feldspar (to 15 percent) locally with quartz. Sections inside the caldera are as much as 360 m thick and consist of intimately interlayered gray, green, and brown alkali rhyolites commonly flow folded. Outside the caldera sections are equally thick in the south and southwest, but thinner to the north; in these places units of similar lithology are persistent for many kilometers, and flow folding is rare. A basal green porphyritic unit north of the caldera contains definite shard texture, but elsewhere this feature is rare. Nevertheless, the great lateral extent and relative thinness of the alkali rhyolite of Jordan Meadow suggests that it is welded ash-flow tuff. Overlying the alkali rhyolite of Jordan Meadow within the McDermitt caldera are four units of lavas. The rhyolite of Hoppin Peaks contains light-brownish-gray rhyolite and black vitophyre, all with sparse phenocrysts of alkali feldspar, quartz, and plagioclase. The rhyolite of McDermitt Creek is greenish or brownish gray and contains abundant phenocrysts of plagioclase. It .is in part structureless and in part flow banded. Alkali rhyolite of Washburn Creek is light gray and contains 0-5 percent phenocrysts alkali feldspar. Quartz labile of Black Mountain forms four isolated remnants of volcanoes in the south part of the caldera. It is brown where well crystallized and black where vitric and contains 5-15 percent pla

Geology of the Humboldt region and the Iron King mine, Bigbug mining district, Yavapai County, Arizona

USGS Publications Warehouse

Creasey, Saville Cyrus

1951-01-01

The Humboldt region is in central Yavapai County, Arizona. The intersection of the 112? 15' meridian and the 34? 30' N parallel is in the approximate geographical center of the region, and the Iron King mine is about 2000 feet west-northwest of the intersection. Pre-Cambrian rocks form the bedrock in the Humboldt region. Late Cenozoic unconsolidated river wash and valley fill, including some interbedded basalt, locally mantle the pre-Cambrian rocks, especially in the north-central part of the region (Lonesome Valley). The pre-Cambrian rocks consist of five newly defined metavolcanic formations derived from flows and tuff s, and of six intrusive units ranging in composition from granite to gabbro or perhaps more mafic types. Relic bedding-and pillow structures are locally prominent in the metavolcanics; geopetal structures are uncommon, but where present, generally indicate that the top is toward the west, though the evidence is too meager to be conclusive. Low-grade dynamothermal metamorphism altered the metavolcanics and to a lesser extent the intrusive rocks, forming textures, structures, and mineral assemblages characteristic of low temperature and moderate stress. The Texas Gulch formation, which is the easternmost metavolcanic formation, consists of five lithologic units. Arranged in the general order of their appearance from east to west they are meta-andesite breccia, purple slate, metarhyolite tuff, meta-andesite, and green slate. The boundary between the Texas Gulch formation and the Iron King meta-andesite is apparently gradational. The Iron King meta-andesite consists of three meta-andesite tuff units, two meta-andesite flow units and one metarhyolite tuff and conglomerate unit. The assemblage chlorite-albite-epitode with or without quartz is dominant in the meta-andesites. Mafic intrusive rocks, which may be approximately contemporaneous with metamorphism, may explain the presence of actinolitic hornblende in the central part of the formation. Toward the west the Iron King meta-andesite appears to grade into the Spud Mountain metabreccia through a zone containing beds characteristic of either one formation or the other. The Spud Mountain metabreccia consists of interbedded metabreccia and metatuff beds. The metatuffs are largely andesitic in composition, but a few thin beds of metarhyolite tuff occur. The fragments in the metabreccia beds consist chiefly or porphyritic meta-andesites and the matrix is meta-andesite tuff. Pre-Cambrian faults now marked by dikes separate the Chaparral Gulch metavolcanics, which lie west of the Spud Mountain metabreccia, from underlying and overlying formations. The Chaparral Gulch metavolcanics contain metarhyolite tuff, metarhyolite flow, and meta-andesite tuff that locally was contaminated by rhyolitic detritus. The Indian Hills metavolcanics, which are northeast of the Chaparral Gulch metavolcanics, consist of two broad units, one composed of metarhyolites and the other of meta-andesites. Metamorphosed tuffs and flows are believed to be represented in both units and flow breccia in the meta-andesites. Granite and alaskite; granodiorite and quartz diorite; diorite, mafic quartz diorite, gabbro and diabase; metarhyolite (?); and quartz porphyry comprise the pre-Cambrian intrusive units mapped. They include both deep-seated and hypabyssal types. Dynamothermal metamorphism has foliated the smaller bodies and the margins of the larger masses and partly converted them into mineral assemblages stable under low-grade metamorphic conditions. Planar structures (chiefly foliation) are omnipresent and linear structures are common in the pre-Cambrian meta-volcanic rocks. North-trending planar structures dominate in the Indian Hills metavolcanics, and in the Spud Mountain metabreccia, whereas northeast-trending planar structures are dominant in the Texas Gulch formation, Iron King meta-andesite, and Chaparral Gulch metavolcanics. To a lesser extent northeast-trending st

Deformation style of the Mesozoic sedimentary rocks in southern Thailand

NASA Astrophysics Data System (ADS)

Kanjanapayont, Pitsanupong

2014-10-01

Mesozoic sedimentary rocks in southern Thailand are widespread from NNE-SSW and N-S in Chumphon and Trang provinces. The Mesozoic stratigraphic units are the marine Triassic Sai Bon Formation and the non-marine Jurassic-Cretaceous Thung Yai Group, the latter subdivided into Khlong Min, Lam Thap, Sam Chom, and Phun Phin Formations. These units overlie Permian carbonate rocks with an angular unconformity, and are overlain unconformably by Cenozoic units and the Quaternary sediments. The Mesozoic rocks have been folded to form two huge first-ordered syncline or synclinoria, the Chumphon and Surat Thani-Krabi-Trang synclinoria. These synclinoria are elongated in NNE-SSW to N-S direction, and incorporate asymmetric lower-order parasitic folds. The folds have moderately to steeply dipping eastward limbs and more gently dipping westward limbs. These folds were transected by brittle fractures in four major directions. These geologic structures indicate WNW-ESE to E-W contraction with top-to-the-east simple shear at some time before the deposition of the Cenozoic sedimentary units. No major deformation has affected the rocks subsequently, apart from the formation of the fault-controlled Cenozoic basins.

Seismic response of rock slopes: Numerical investigations on the role of internal structure

NASA Astrophysics Data System (ADS)

Arnold, L.; Applegate, K.; Gibson, M.; Wartman, J.; Adams, S.; Maclaughlin, M.; Smith, S.; Keefer, D. K.

2013-12-01

The stability of rock slopes is significantly influenced and often controlled by the internal structure of the slope created by such discontinuities as joints, shear zones, and faults. Under seismic conditions, these discontinuities influence both the resistance of a slope to failure and its response to dynamic loading. The dynamic response, which can be characterized by the slope's natural frequency and amplification of ground motion, governs the loading experienced by the slope in a seismic event and, therefore, influences the slope's stability. In support of the Network for Earthquake Engineering Simulation (NEES) project Seismically-Induced Rock Slope Failure: Mechanisms and Prediction (NEESROCK), we conducted a 2D numerical investigation using the discrete element method (DEM) coupled with simple discrete fracture networks (DFNs). The intact rock mass is simulated with a bonded assembly of discrete particles, commonly referred to as the bonded-particle model (BPM) for rock. Discontinuities in the BPM are formed by the insertion of smooth, unbonded contacts along specified planes. The influence of discontinuity spacing, orientation, and stiffness on slope natural frequency and amplification was investigated with the commercially available Particle Flow Code (PFC2D). Numerical results indicate that increased discontinuity spacing has a non-linear effect in decreasing the amplification and increasing the natural frequency of the slope. As discontinuity dip changes from sub-horizontal to sub-vertical, the slope's level of amplification increases while the natural frequency of the slope decreases. Increased joint stiffness decreases amplification and increases natural frequency. The results reveal that internal structure has a strong influence on rock slope dynamics that can significantly change the system's dynamic response and stability during seismic loading. Financial support for this research was provided by the United States National Science Foundation (NSF) under grant CMMI-1156413.

Map showing depth to bedrock in the Seattle 30' by 60' Quadrangle, Washington

USGS Publications Warehouse

Yount, J.C.; Dembroff, G.R.; Barats, G.M.

1985-01-01

Bedrock throughout the Seattle quadrangle is presumed to be volcanic rock, conglomerate, Sandstone, or Shale and is Tertiary in age. With the exception of a few reports of age or lithology collected from oil wells (Livingston, 1958), the subsurface information used for this map sheds little light on the nature and distribution of the various Tertiary rocks in the subsurface. It is assumed, on the basis of pronounced lithologic differences in drill holes and widespread unconformable relationships with underlying bedrock units seen in marine seismic reflection profiles, that the deposits overlying bedrock are Quaternary in age, but no direct dating of materials has been done to confirm this assumption.

Petroleum geology and resources of the Amu-Darya basin, Turkmenistan, Uzbekistan, Afghanistan, and Iran

USGS Publications Warehouse

Ulmishek, Gregory F.

2004-01-01

The Amu-Darya basin is a highly productive petroleum province in Turkmenistan and Uzbekistan (former Soviet Union), extending southwestward into Iran and southeastward into Afghanistan. The basin underlies deserts and semideserts north of the high ridges of the Kopet-Dag and Bande-Turkestan Mountains. On the northwest, the basin boundary crosses the crest of the Karakum regional structural high, and on the north the basin is bounded by the shallow basement of the Kyzylkum high. On the east, the Amu-Darya basin is separated by the buried southeast spur of the Gissar Range from the Afghan-Tajik basin, which is deformed into a series of north-south-trending synclinoria and anticlinoria. The separation of the two basins occurred during the Neogene Alpine orogeny; earlier, they were parts of a single sedimentary province. The basement of the Amu-Darya basin is a Hercynian accreted terrane composed of deformed and commonly metamorphosed Paleozoic rocks. These rocks are overlain by rift grabens filled with Upper Permian-Triassic rocks that are strongly compacted and diagenetically altered. This taphrogenic sequence, also considered to be a part of the economic basement, is overlain by thick Lower to Middle Jurassic, largely continental, coal-bearing rocks. The overlying Callovian-Oxfordian rocks are primarily carbonates. A deep-water basin surrounded by shallow shelves with reefs along their margins was formed during this time and reached its maximum topographic expression in the late Oxfordian. In Kimmeridgian-Tithonian time, the basin was filled with thick evaporites of the Gaurdak Formation. The Cretaceous-Paleogene sequence is composed chiefly of marine clastic rocks with carbonate intervals prominent in the Valanginian, Barremian, Maastrichtian, and Paleocene stratigraphic units. In Neogene time, the Alpine orogeny on the basin periphery resulted in deposition of continental clastics, initiation of new and rejuvenation of old faults, and formation of most structural traps. A single total petroleum system is identified in the Amu-Darya basin. The system is primarily gas prone. Discovered gas reserves are listed by Petroconsultants (1996) at about 230 trillion cubic feet, but recent discoveries and recent reserve estimates in older fields should increase this number by 40 to 50 trillion cubic feet. Reserves of liquid hydrocarbons (oil and condensate) are comparatively small, less than 2 billion barrels. Most of the gas reserves are concentrated in two stratigraphic intervals, Upper Jurassic carbonates and Neocomian clastics, each of which contains about one-half of the reserves. Reserves of other stratigraphic units?from Middle Jurassic to Paleogene in age?are relatively small. Source rocks for the gas are the Lower to Middle Jurassic clastics and coal and Oxfordian basinal black shales in the east-central part of the basin. The latter is probably responsible for the oil legs and much of the condensate in gas pools. Throughout most of the basin both source-rock units are presently in the gas-window zone. Traps are structural, paleogeomorphic, and stratigraphic, as well as a combination of these types. The giant Dauletabad field is in a combination trap with an essential hydrodynamic component. Four assessment units were identified in the total petroleum system. One unit in the northeastern, northern, and northwestern marginal areas of the basin and another in the southern marginal area are characterized by wide vertical distribution of hydrocarbon pools in Middle Jurassic to Paleocene rocks and the absence of the salt of the Gaurdak Formation. The other two assessment units are stratigraphically stacked; they occupy the central area of the basin and are separated by the regional undeformed salt seal of the Gaurdak Formation. The largest part of undiscovered hydrocarbon resources of the Amu-Darya basin is expected in older of these assessment units. The mean value of total assessed resources of the Amu-Darya basin is estimated

Alaskan North Slope petroleum systems

USGS Publications Warehouse

Magoon, L.B.; Lillis, P.G.; Bird, K.J.; Lampe, C.; Peters, K.E.

2003-01-01

Six North Slope petroleum systems are identified, described, and mapped using oil-to-oil and oil-to-source rock correlations, pods of active source rock, and overburden rock packages. To map these systems, we assumed that: a) petroleum source rocks contain 3.2 wt. % organic carbon (TOC); b) immature oil-prone source rocks have hydrogen indices (HI) >300 (mg HC/gm TOC); c) the top and bottom of the petroleum (oil plus gas) window occur at vitrinite reflectance values of 0.6 and 1.0% Ro, respectively; and d) most hydrocarbons are expelled within the petroleum window. The six petroleum systems we have identified and mapped are: a) a southern system involving the Kuna-Lisburne source rock unit that was active during the Late Jurassic and Early Cretaceous; b) two western systems involving source rock in the Kingak-Blankenship, and GRZ-lower Torok source rock units that were active during the Albian; and c) three eastern systems involving the Shublik-Otuk, Hue Shale and Canning source rock units that were active during the Cenozoic. The GRZ-lower Torok in the west is correlative with the Hue Shale to the east. Four overburden rock packages controlled the time of expulsion and gross geometry of migration paths: a) a southern package of Early Cretaceous and older rocks structurally-thickened by early Brooks Range thrusting; b) a western package of Early Cretaceous rocks that filled the western part of the foreland basin; c) an eastern package of Late Cretaceous and Paleogene rocks that filled the eastern part of the foreland basin; and d) an offshore deltaic package of Neogene rocks deposited by the Colville, Canning, and Mackenzie rivers. This petroleum system poster is part of a series of Northern Alaska posters on modeling. The poster in this session by Saltus and Bird present gridded maps for the greater Northern Alaskan onshore and offshore that are used in the 3D modeling poster by Lampe and others. Posters on source rock units are by Keller and Bird as well as Peters and others. Sandstone and shale compaction properties used in sedimentary basin modeling are covered in a poster by Rowan and others. The results of this modeling exercise will be used in our next Northern Alaska oil and gas resource assessment.

The Early Mesozoic volcanic arc of western North America in northeastern Mexico

NASA Astrophysics Data System (ADS)

Barboza-Gudiño, José Rafael; Orozco-Esquivel, María Teresa; Gómez-Anguiano, Martín; Zavala-Monsiváis, Aurora

2008-02-01

Volcanic successions underlying clastic and carbonate marine rocks of the Oxfordian-Kimmeridgian Zuloaga Group in northeastern Mexico have been attributed to magmatic arcs of Permo-Triassic and Early Jurassic ages. This work provides stratigraphic, petrographic geochronological, and geochemical data to characterize pre-Oxfordian volcanic rocks outcropping in seven localities in northeastern Mexico. Field observations show that the volcanic units overlie Paleozoic metamorphic rocks (Granjeno schist) or Triassic marine strata (Zacatecas Formation) and intrude Triassic redbeds or are partly interbedded with Lower Jurassic redbeds (Huizachal Group). The volcanic rocks include rhyolitic and rhyodacitic domes and dikes, basaltic to andesitic lava flows and breccias, and andesitic to rhyolitic pyroclastic rocks, including breccias, lapilli, and ashflow tuffs that range from welded to unwelded. Lower-Middle Jurassic ages (U/Pb in zircon) have been reported from only two studied localities (Huizachal Valley, Sierra de Catorce), and other reported ages (Ar/Ar and K-Ar in whole-rock or feldspar) are often reset. This work reports a new U/Pb age in zircon that confirms a Lower Jurassic (193 Ma) age for volcanic rocks exposed in the Aramberri area. The major and trace element contents of samples from the seven localities are typical of calc-alkaline, subduction-related rocks. The new geochronological and geochemical data, coupled with the lithological features and stratigraphic positions, indicate volcanic rocks are part of a continental arc, similar to that represented by the Lower-Middle Jurassic Nazas Formation of Durango and northern Zacatecas. On that basis, the studied volcanic sequences are assigned to the Early Jurassic volcanic arc of western North America.

Implications of Late Cretaceous U-Pb zircon ages of granitic intrusions cutting ophiolitic and volcanogenic rocks for the assembly of the Tauride allochthon in SE Anatolia (Helete area, Kahramanmaraş Region, SE Turkey)

NASA Astrophysics Data System (ADS)

Nurlu, Nusret; Parlak, Osman; Robertson, Alastair; von Quadt, Albrecht

2016-01-01

An assemblage of NE-SW-trending, imbricate thrust slices (c. 26 km E-W long × 6.3 km N-S) of granitic rocks, basic-felsic volcanogenic rocks (Helete volcanics), ophiolitic rocks (Meydan ophiolite) and melange (Meydan melange) is exposed near the Tauride thrust front in SE Anatolia. The volcanogenic rocks were previously assumed to be Eocene because of associated Nummulitic limestones. However, ion probe U-Pb dating of zircons extracted from the intrusive granitic rocks yielded ages of 92.9 ± 2.2-83.1 ± 1.5 Ma (Cenomanian-Campanian). The Helete volcanic unit and the overlying Meydan ophiolitic rocks both are intruded by granitic rocks of similar age and composition. Structurally underlying ophiolite-related melange includes similar-aged, but fragmented granitic intrusions. Major, trace element and rare earth element analyses coupled with electron microprobe analysis of the granitic rocks show that they are metaluminus to peraluminus and calc-alkaline in composition. A magmatic arc setting is inferred from a combination of tectonomagmatic discrimination, ocean ridge granite-normalized multi-element patterns and biotite geochemistry. Sr-Nd-Pb isotope data further suggest that the granitoid rocks were derived from variably mixed mantle and crustal sources. Granitic rocks cutting the intrusive rocks are inferred to have crystallized at ~5-16 km depth. The volcanogenic rocks and granitic rocks originated in a supra-subduction zone setting that was widely developed throughout SE Anatolia. Initial tectonic assembly took place during the Late Cretaceous probably related to northward subduction and accretion beneath the Tauride continent (Keban and Malatya platforms). Initial tectonic assembly was followed by exhumation and then transgression by shelf-depth Nummulitic limestones during Mid-Eocene, as documented in several key outcrops. Final emplacement onto the Arabian continental margin took place during the Early Miocene.

The Nahuel Niyeu basin: A Cambrian forearc basin in the eastern North Patagonian Massif

NASA Astrophysics Data System (ADS)

Greco, Gerson A.; González, Santiago N.; Sato, Ana M.; González, Pablo D.; Basei, Miguel A. S.; Llambías, Eduardo J.; Varela, Ricardo

2017-11-01

Early Paleozoic basement of the eastern North Patagonian Massif includes low- and high grade metamorphic units, which consist mainly of alternating paraderived metamorphic rocks (mostly derived from siliciclastic protoliths) with minor intercalations of orthoderived metamorphic rocks. In this contribution we provide a better understanding of the tectonic setting in which the protoliths of these units were formed, which adds to an earlier suggested idea. With this purpose, we studied the metasedimentary rocks of the low-grade Nahuel Niyeu Formation from the Aguada Cecilio area combining mapping and petrographic analysis with U-Pb geochronology and characterization of detrital zircon grains. The results and interpretations of this unit, together with published geological, geochronological and geochemical information, allow us to interpret the sedimentary and igneous protoliths of all metamorphic units from the massif as formed in a forearc basin at ∼520-510 Ma (Nahuel Niyeu basin). It probably was elongated in the ∼NW-SE direction, and would have received detritus from a proximal source area situated toward its northeastern side (present coordinates). The basin might be related to an extensional tectonic regime. Most likely source rocks were: (1) 520-510 Ma, acidic volcanic rocks (an active magmatic arc), (2) ∼555->520 Ma, acidic plutonic and volcanic rocks (earlier stages of the same arc), and (3) latest Ediacaran-Terreneuvian, paraderived metamorphic rocks (country rocks of the arc). We evaluate the Nahuel Niyeu basin considering the eastern North Patagonian Massif as an autochthonous part of South America, adding to the discussion of the origin of Patagonia.

Continuation of down-hole geophysical testing for rock sockets : [technical summary].

DOT National Transportation Integrated Search

2013-11-01

The rock socket is critical to a drilled shaft : foundation because it lies within a rock stratum : and accounts for much of the capacity of the : foundational unit. Consistency of the rocks : structure and composition must be identifed : because ...

Geohydrologic systems in Kansas physical framework of the upper aquifer unit in the western interior plains aquifer system

USGS Publications Warehouse

Hansen, Cristi V.; Spinazola, Joseph M.; Underwood, E.J.; Wolf, R.J.

1992-01-01

The purpose of this Hydrologic Investigations Atlas is to provide a description of the principal geohydrologic systems in Upper Cambrian through Lower Cretaceous rocks in Kansas. This investigation was made as part of the Central Midwest Regional Aquifer-System Analysis (CMRASA). The CMRASA is one of several major investigations by the U.S. Geological Survey of regional aquifer systems in the United States. These regional investigations are designed to increase knowledge of the flow regime and hydrologic properties of major aquifer systems and to provide quantitative information for the assessment, development, and management water supplies. The CMRASA study area includes all or parts of 10 Central Midwestern States (Jorgensen and Signor, 1981), as shown on the envelope cover.This Hydrologic Investigations Atlas, which consists of a series of nine chapters, presents a description of the physical framework and the geohydrology of principal aquifers and confining systems in Kansas. Chapter D presents maps that show the areal extent, altitude and configuration of the top, and thickness of Mississippian rocks that compose the upper aquifer unit of the Western Interior Plains aquifer system in Kansas, The chapter is limited to the presentation of the physical framework of the upper aquifer unit. The interpretation of the physical framework of the upper aquifer unit is based on selected geophysical and lithologic logs and published maps of stratigraphically equivalent units. Maps indicating the thickness and the altitude and configuration of the top of the upper aquifer unit in the Western Interior Plains aquifer system have been prepared as part of a series of interrelated maps that describe the stratigraphic interval from the Precambrian basement through Lower Cretaceous rocks. A concerted effort was made to ensure that maps of each geohydrologic unit are consistent with the maps of underlying and overlying units. Chapter A of this atlas series (Wolf and others, 1990) describes the relation of principal geohydrologic systems in Kansas and presents a more detailed discussion of the methods and data used to prepare and ensure consistency among the sets of maps.

Phosphate rock resources of the United States

USGS Publications Warehouse

Cathcart, James Bachelder; Sheldon, Richard Porter; Gulbrandsen, Robert A.

1984-01-01

In 1980, the United States produced about 54 million tons of phosphate rock, or about 40 percent of the world's production, of which a substantial amount was exported, both as phosphate rock and as chemical fertilizer. During the last decade, predictions have been made that easily ruinable, low-cost reserves of phosphate rock would be exhausted, and that by the end of this century, instead of being a major exporter of phosphate rock, the United States might become a net importer. Most analysts today, however, think that exports will indeed decline in the next one or two decades, but that resources of phosphate are sufficient to supply domestic needs for a long time into the future. What will happen in the future depends on the actual availability of low-cost phosphate rock reserves in the United States and in the world. A realistic understanding of future phosphate rock reserves is dependent on an accurate assessment, now, of national phosphate rock resources. Many different estimates of resources exist; none of them alike. The detailed analysis of past resource estimates presented in this report indicates that the estimates differ more in what is being estimated than in how much is thought to exist. The phosphate rock resource classification used herein is based on the two fundamental aspects of a mineral resource(l) the degree of certainty of existence and (2) the feasibility of economic recovery. The comparison of past estimates (including all available company data), combined with the writers' personal knowledge, indicates that 17 billion metric tons of identified, recoverable phosphate rock exist in the United States, of which about 7 billion metric tons are thought to be economic or marginally economic. The remaining 10 billion metric tons, mostly in the Northwestern phosphate district of Idaho, are considered to be subeconomic, ruinable when some increase in the price of phosphate occurs. More than 16 billion metric tons probably exist in the southeastern Coastal Plain phosphate province, principally in Florida and North Carolina and offshore in the shallow Atlantic Ocean from North Carolina to southern Florida. This resource is considered to be hypothetical because it is based on geologic inference combined with sparse drilling data. Total resources of phosphate rock in the United States are sufficient to supply domestic demands for the foreseeable future, provided that drilling is done to confirm hypothetical resources and the chemistry of the deposits is determined. Mining and beneficiation techniques will have to be modified or improved, and new techniques will have to be developed so that these deposits can be profitably exploited.

Recent Results from the Spirit Rover at Home Plate and "Silica Valley"

NASA Astrophysics Data System (ADS)

Squyres, S. W.

2007-12-01

The Mars Exploration Rover Spirit has spent more than 500 sols exploring Home Plate in the inner basin of the Columbia Hills, and adjacent materials. Home Plate is a plateau of layered rocks 80-90 meters in diameter and ~2 meters high. The rocks are clastic and of moderately altered alkali basalt composition, enriched in some volatile elements. A coarse-grained lower unit is overlain by a finer-grained upper unit. Textural observations, including a prominent bomb sag, indicate that the lower strata were emplaced in an explosive event. Geochemical similarities to nearby volcanic rocks and the enrichment in volatile elements favor an explosive volcanic origin. Along the northern portion of Home Plate, the upper unit is very well sorted and composed of well rounded sand sized grains, pointing to textural maturity and suggesting an eolian origin. Along the southeastern portion, however, the upper unit contains some coarser granules too large to be transported by saltation. While their size is comparable to other clasts on Mars that have moved by saltation-induced creep, the observed textures clearly are consistent with emplacement as a pyroclastic surge. The upper and lower units are effectively identical in composition, so the upper unit probably represents a finer-grained fraction of pyroclastic materials that may have undergone some local reworking by wind. Rocks along the margins of Home Plate show a consistent dip toward the center of the plateau. We interpret Home Plate to be the eroded remnants of a formerly more extensive sheet of pyroclastic materials, perhaps produced in a phreatomagmatic eruption. The inward dips may have arisen when pyroclastic materials overrode and partially buried a pre-existing bowl-shaped depression such as an impact crater, draping the topography. Immediately to the east of Home Plate is a narrow valley bounded on one side by Home Plate and on the other by Mitcheltree Ridge. While operating within this valley, Spirit's inoperative right front wheel excavated a small patch of high albedo soil. Mini-TES spectra of this soil were well fit by amorphous silica, and subsequent investigation with the APXS showed a composition that was more than 90% SiO2. The deposits are also enriched in Ti. Mini-TES spectra of nearby rocks also show a strong signature of amorphous silica, and APXS spectra of these rocks also confirm a high silica content. We consider two hypotheses for the formation of these silica-rich deposits. One is that they developed via precipitation from hydrothermal fluids. Siliceous sinter deposits are common in terrestrial hydrothermal environments where fluids dissolve Si from host rocks at high temperatures and then reprecipitate silica at lower temperatures. Alternatively, the Si-rich materials may represent the remnants of formerly basaltic materials that have been extensively leached in a fumarolic environment under acid sulfate conditions. In either case, the proximity to Home Plate is consistent with formation via the interaction of basaltic volcanism with groundwater. The astrobiological implications of these Si-rich deposits may be significant. Both hydrothermal systems and fumaroles are capable of supporting microbial ecosystems on Earth, and precipitated silica deposits in both environments can preserve strong textural evidence of microbial life.

Localized and Areally Extensive Alterations in Marathon Valley, Endeavour Crater Rim, Mars

NASA Technical Reports Server (NTRS)

Mittlefehldt, David W.; Gellert, Ralf; Van Bommel, Scott; Arvidson, Raymond E.; Clark, Benton C.; Cohen, Barbara A.; Farrand, William H.; Ming, Douglas W.; Schroeder, Christian; Yen, Albert S.;

Geologic map of the east half of the Lime Hills 1:250,000-scale quadrangle, Alaska

USGS Publications Warehouse

Gamble, Bruce M.; Reed, Bruce L.; Richter, Donald H.; Lanphere, Marvin A.

2013-01-01

This map is compiled from geologic mapping conducted between 1985 and 1992 by the U.S. Geological Survey as part of the Alaska Mineral Resource Assessment Program. That mapping built upon previous USGS work (1963–1988) unraveling the magmatic history of the Alaska–Aleutian Range batholith. Quaternary unit contacts depicted on this map are derived largely from aerial-photograph interpretation. K-Ar ages made prior to this study have been recalculated using 1977 decay constants. The east half of the Lime Hills 1:250,000-scale quadrangle includes part of the Alaska–Aleutian Range batholith and several sequences of sedimentary rocks or mixed sedimentary and volcanic rocks. The Alaska–Aleutian Range batholith contains rocks that represent three major igneous episodes, (1) Early and Middle Jurassic, (2) Late Cretaceous and early Tertiary, and (3) middle Tertiary; only rocks from the latter two episodes are found in this map area. The map area is one of very steep and rugged terrain; elevations range from a little under 1,000 ft (305 m) to 9,828 ft (2,996 m). Foot traverses are generally restricted to lowermost elevations. Areas suitable for helicopter landings can be scarce at higher elevations. Most of the area was mapped from the air, supplemented by direct examination of rocks where possible. This restricted access greatly complicates understanding some of the more complex geologic units. For example, we know there are plutons whose compositions vary from gabbro to granodiorite, but we have little insight as to how these phases are distributed and what their relations might be to each other. It is also possible that some of what we have described as compositionally complex plutons might actually be several distinct intrusions.

Model test study on propagation law of plane stress wave in jointed rock mass under different in-situ stresses

NASA Astrophysics Data System (ADS)

Dong, Qian

2017-12-01

The study of propagation law of plane stress wave in jointed rock mass under in-situ stress has important significance for safety excavation of underground rock mass engineering. A model test of the blasting stress waves propagating in the intact rock and jointed rock mass under different in-situ stresses was carried out, and the influencing factors on the propagation law, such as the scale of static loads and the number of joints were studied respectively. The results show that the transmission coefficient of intact rock is larger than that of jointed rock mass under the same loading condition. With the increase of confining pressure, the transmission coefficients of intact rock and jointed rock mass both show an trend of increasing first and then decreasing, and the variation of transmission coefficients in intact rock is smaller than that of jointed rock mass. Transmission coefficient of jointed rock mass decreases with the increase of the number of joints under the same loading condition, when the confining pressure is relatively small, the reduction of transmission coefficients decreases with the increasing of the number of joints, and the variation law of the reduction of transmission coefficients is contrary when the confining pressure is large.

Lisburne Group (Mississippian and Pennsylvanian), potential major hydrocarbon objective of Arctic Slope, Alaska

USGS Publications Warehouse

Bird, Kenneth J.; Jordan, Clifton F.

1977-01-01

The Lisburne Group, a thick carbonate-rock unit of Mississippian and Pennsylvanian age, is one of the most widespread potential reservoir-rock units in northern Alaska. A comprehensive review of the Lisburne in the subsurface of the eastern Arctic Slope indicates attractive reservoir characteristics in a favorable source and migration setting where numerous trapping mechanisms appear to be available. Evaluation of this group as a potential exploration objective is particularly timely because of impending offshore sales in the Beaufort Sea and current exploration programs under way in the Prudhoe Bay area and the Naval Petroleum Reserve. Dolomite and sandstone have been identified as reservoir rocks. Oolitic grainstone is a common rock type, but observations indicate little reservoir potential owing to complete void filling by calcite cement. The most important reservoir rock as judged by thickness, areal extent, and predictability is microsucrosic (10 to 30µ) dolomite of intertidal to supratidal origin. It is present throughout the Lisburne and is most abundant near the middle of the sequence. Northward it decreases in thickness from 1,000 ft (300 m) to less than 100 ft (30 m). Porosity of the dolomite as determined in selected wells averages between 10 and 15% and attains a maximum of slightly more than 25%. Net thickness of reservoir rocks (i.e., rocks with greater than 5% porosity) ranges in these wells from 40 to 390 ft (40 to 120 m). Oil shows are common, and drill-stem tests have yielded as much as 1,600 bbl/day of oil and 22 MMcf/day of gas in the Lisburne pool of the Prudhoe Bay field and as much as 2,057 bbl/day of salt water outside the field area. The occurrence of dolomite over such a large area makes its presence in the offshore Beaufort Sea and adjacent Naval Petroleum Reserve 4 fairly certain. The presence of sandstone as thick as 140 ft (40 m) in the middle and upper part of the Lisburne in two coastal wells suggests that larger areas of sandstone may be found on the north in offshore areas. Shows of oil and gas and a saltwater flow of 1,470 bbl/day have been recorded from this sandstone facies. Shales of Permian and Cretaceous ages unconformably overlie the Lisburne, providing adequate sealing beds above potential reservoirs. Impermeable limestone (completely cemented grainstone) and thin beds of shale may serve as seals within the Lisburne, but the possibility of fractures in these units may negate their sealing capability. The most favorable source rock for Lisburne hydrocarbons appears to be Cretaceous shale that unconformably overlies the Lisburne east of Prudhoe Bay. This shale is reported to be a rich source rock and is the most likely source for the entire Prudhoe Bay field. A source within the Lisburne or within the underlying Kayak Shale is postulated for oil shows in the southernmost Lisburne wells. This postulated source may be in a more basinal facies of the Lisburne and may be similar to dark shale in the upper Lisburne in thrust slices to dark shale in the upper Lisburne in thrust slices in the Brooks Range. Coal in the underlying Endicott Group is a possible source for dry gas. At present, much of this coal probably is in a gas-generating regime downdip from the Prudhoe Bay field. Stratigraphic traps involving the Lisburne Group may have resulted from widespread Permian and Cretaceous unconformities. Structural traps related to normal faulting may be present along the trend of the Barrow arch, and faulted anticlines are numerous in the foothills of the Brooks Range. Combination traps are possible along the trend of the Barrow arch.

40 CFR 60.401 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock Plants § 60.401 Definitions. (a) Phosphate rock plant means any plant which produces or prepares phosphate rock product by any or..., calcining, and grinding. (b) Phosphate rock feed means all material entering the process unit, including...

40 CFR 60.401 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock Plants § 60.401 Definitions. (a) Phosphate rock plant means any plant which produces or prepares phosphate rock product by any or..., calcining, and grinding. (b) Phosphate rock feed means all material entering the process unit, including...

40 CFR 60.401 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock Plants § 60.401 Definitions. (a) Phosphate rock plant means any plant which produces or prepares phosphate rock product by any or..., calcining, and grinding. (b) Phosphate rock feed means all material entering the process unit, including...

40 CFR 60.401 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Phosphate Rock Plants § 60.401 Definitions. (a) Phosphate rock plant means any plant which produces or prepares phosphate rock product by any or..., calcining, and grinding. (b) Phosphate rock feed means all material entering the process unit, including...

Rocks in Our Pockets

ERIC Educational Resources Information Center

Plummer, Donna; Kuhlman, Wilma

2005-01-01

To introduce students to rocks and their characteristics, teacher can begin rock units with the activities described in this article. Students need the ability to make simple observations using their senses and simple tools.

Overview of the potential and identified petroleum source rocks of the Appalachian basin, eastern United States: Chapter G.13 in Coal and petroleum resources in the Appalachian basin: distribution, geologic framework, and geochemical character

USGS Publications Warehouse

Coleman, James L.; Ryder, Robert T.; Milici, Robert C.; Brown, Stephen; Ruppert, Leslie F.; Ryder, Robert T.

2014-01-01

The Appalachian basin is the oldest and longest producing commercially viable petroleum-producing basin in the United States. Source rocks for reservoirs within the basin are located throughout the entire stratigraphic succession and extend geographically over much of the foreland basin and fold-and-thrust belt that make up the Appalachian basin. Major source rock intervals occur in Ordovician, Devonian, and Pennsylvanian strata with minor source rock intervals present in Cambrian, Silurian, and Mississippian strata.

Plutonism in the central part of the Sierra Nevada Batholith, California

USGS Publications Warehouse

Bateman, Paul C.

1992-01-01

The Sierra Nevada batholith comprises the plutonic rocks of Mesozoic age that underlie most of the Sierra Nevada, a magnificent mountain range that originated in the Cenozoic by the westward tilting of a huge block of the Earth's crust. Scattered intrusions west of the batholith in the western metamorphic belt of the Sierra Nevada and east of the Sierra Nevada in the Benton Range and the White and Inyo Mountains are satellitic to but not strictly parts of the Sierra Nevada batholith. Nevertheless, all the plutonic rocks are related in origin. The batholith lies along the west edge of the Paleozoic North American craton, and Paleozoic and early Mesozoic oceanic crust underlies its western margin. It was emplaced in strongly deformed but weakly metamorphosed strata ranging in age from Proterozoic to Cretaceous. Sedimentary rocks of Proterozoic and Paleozoic age crop out east of the batholith in the White and Inyo Mountains, and metamorphosed sedimentary and volcanic rocks of Paleozoic and Mesozoic age crop out west of the batholith in the western metamorphic belt. A few large and many small, generally elongate remnants of metamorphic rocks lie within the batholith. Sparse fossils from metasedimentary rocks and isotopic ages for metavolcanic rocks indicate that the metamorphic rocks in the remnants range in age from Early Cambrian to Early Cretaceous. Within the map area (the Mariposa 1 0 by 2 0 quadrangle), the bedding, cleavage, and axial surfaces of folds generally trend about N. 35 0 W., parallel to the long axis of the Sierra Nevada. The country rocks comprise strongly deformed but generally coherent sequences; however, some units in the western metamorphic belt may partly consist of melanges. Most sequences are in contact with other sequences, at least for short distances, but some sequences within the batholith are bounded on one or more sides by plutonic rocks. Proterozoic and Paleozoic sedimentary strata east of the Sierra Nevada and Paleozoic strata in remnants of country rocks within the eastern part of the batholith, although strongly deformed, are autochthonous or have been displaced only short distances, whereas some Mesozoic strata in the western metamorphic belt may be allochthonous. Probably the strata in the western metamorphic belt were deposited in marginal basins and island arcs, but the possibility that they were transported from distant places has not been disproved. All the country rocks have been strongly deformed, most of them more than once. Tectonic disturbances occurred during the Devonian and Mississippian (Antler? orogeny), the Permian and (or) Early Triassic (Sonoman? orogeny), the Late Jurassic (Nevadan orogeny), and at various other times during emplacement of the batholith and uplift that accompanied and followed its emplacement. The strata in the western metamorphic belt probably were deformed in an early Mesozoic subduction complex. The plutonic rocks range in composition from gabbro to leucogranite, but tonalite, granodiorite, and granite are the most common rock types. Most are medium to coarse grained, but some small rock masses are fine grained. Most have hypidiomorphic-granular textures and are equigranular, but some having compositions close to the boundary between granite and granodiorite contain large crystals of alkali feldspar. Serpentinized ultramafic rocks are present locally in the western metamorphic belt within and adjacent to the Melones fault zone. Except for serpentinized ultramafic rocks, trondhjemite, and most granites, all the plutonic rocks contain significant amounts of hornblende. Most of the granitoids are metaluminous or weakly peraluminous; strongly peraluminous granites are present only in the White Mountains. Most of the granitoids are assigned to units of lithodemic rank, and most of these units are assigned to intrusive suites. Plutons assigned to the same lithodeme are composed of rock of similar composition, fabric, and age and are presumed to h

Assessment of undiscovered hydrocarbon resources of sub-Saharan Africa

USGS Publications Warehouse

Brownfield, Michael E.

2016-01-01

The assessment was geology-based and used the total petroleum system (TPS) concept. The geologic elements of a TPS are hydrocarbon source rocks (source rock maturation and hydrocarbon generation and migration), reservoir rocks (quality and distribution), and traps where hydrocarbon accumulates. Using these geologic criteria, 16 conventional total petroleum systems and 18 assessment units in the 13 provinces were defined. The undiscovered, technically recoverable oil and gas resources were assessed for all assessment units.

New Constraints on the Rock Size Distribution on the Moon from Diviner Infrared Measurements

NASA Astrophysics Data System (ADS)

Elder, C. M.; Hayne, P. O.; Piqueux, S.; Bandfield, J. L.; Ghent, R. R.; Williams, J. P.; Paige, D. A.

2015-12-01

Most of the Moon's surface is covered by fine-grained regolith produced by impacts, but rocks of various sizes are also present. Rock abundances can be used to distinguish different surface units and quantify the ages of craters [1,2]. Furthermore, the size distribution of a population of rocks reflects the process by which they were formed and fragmented [3]. Knowing the distribution of rock sizes on the Moon can improve our understanding of regolith generation, evolution, and distribution, can be used to select landing sites, and can provide insight into the processes that have shaped the lunar surface. The high thermal inertia of rocks compared to fine-grained regolith leads to multiple temperatures within the field of view of nighttime multispectral data returned from the Lunar Reconnaissance Orbiter (LRO) Diviner thermal radiometer. This data has been used to map the rock abundance across the lunar surface [1]. However, the derived rock abundance is not constant over the course of the lunar night; small rocks cool faster than large rocks and eventually become indistinguishable from regolith using Diviner data. Thus the detectable rock abundance will decrease over the course of the lunar night. Here we use this change in measured rock abundance with time to constrain the size distribution of rock fragments, and map its variation across the lunar surface. We will show results from this study and discuss the implications for the geologic processes shaping the lunar surface. [1] Bandfield J. L. et al. (2011) JGR, 116, E00H02. [2] Ghent R. R. et al. (2014) Geology, 42, no. 12, 1059-1062. [3] Hartmann W. K. (1969) Icarus, 10, 201-213. Part of this work was performed at the Jet Propulsion Laboratory, California Institute of Technology under contract with the National Aeronautics and Space Administration.

A Lithology Based Map Unit Schema For Onegeology Regional Geologic Map Integration

NASA Astrophysics Data System (ADS)

Moosdorf, N.; Richard, S. M.

2012-12-01

A system of lithogenetic categories for a global lithological map (GLiM, http://www.ifbm.zmaw.de/index.php?id=6460&L=3) has been compiled based on analysis of lithology/genesis categories for regional geologic maps for the entire globe. The scheme is presented for discussion and comment. Analysis of units on a variety of regional geologic maps indicates that units are defined based on assemblages of rock types, as well as their genetic type. In this compilation of continental geology, outcropping surface materials are dominantly sediment/sedimentary rock; major subdivisions of the sedimentary category include clastic sediment, carbonate sedimentary rocks, clastic sedimentary rocks, mixed carbonate and clastic sedimentary rock, colluvium and residuum. Significant areas of mixed igneous and metamorphic rock are also present. A system of global categories to characterize the lithology of regional geologic units is important for Earth System models of matter fluxes to soils, ecosystems, rivers and oceans, and for regional analysis of Earth surface processes at global scale. Because different applications of the classification scheme will focus on different lithologic constituents in mixed units, an ontology-type representation of the scheme that assigns properties to the units in an analyzable manner will be pursued. The OneGeology project is promoting deployment of geologic map services at million scale for all nations. Although initial efforts are commonly simple scanned map WMS services, the intention is to move towards data-based map services that categorize map units with standard vocabularies to allow use of a common map legend for better visual integration of the maps (e.g. see OneGeology Europe, http://onegeology-europe.brgm.fr/ geoportal/ viewer.jsp). Current categorization of regional units with a single lithology from the CGI SimpleLithology (http://resource.geosciml.org/201202/ Vocab2012html/ SimpleLithology201012.html) vocabulary poorly captures the lithologic character of such units in a meaningful way. A lithogenetic unit category scheme accessible as a GeoSciML-portrayal-based OGC Styled Layer Description resource is key to enabling OneGeology (http://oneGeology.org) geologic map services to achieve a high degree of visual harmonization.

Geology and ground-water resources of Rock County, Wisconsin

USGS Publications Warehouse

LeRoux, E.F.

1964-01-01

Rock County is in south-central Wisconsin adjacent to the Illinois State line. The county has an area of about 723 square miles and had a population of about 113,000 in 1957 ; it is one of the leading agricultural and industrial counties in the State. The total annual precipitation averages about 32 inches, and the mean annual temperature is about 48 ? F. Land-surface altitudes are generally between 800 and 00 feet, but range from 731 feet, where the Rock River flows into Illinois, to above 1,080 feet, at several places in the northwestern part of the county. The northern part of Rock County consists of the hills and kettles of a terminal moraine which slopes southward to a flat, undissected outwash plain. The southeastern part of the county is an area of gentle slopes, whereas the southwestern part consists of steep-sided valleys and ridges. Rock County is within the drainage basin of the Rock River, which flows southward through the center of the county. The western and southwestern parts of ,the county are drained by the Sugar River und Coon Creek, both of which flow into the Pecatonica River in Illinois and thence into the Rock River. The southeastern part of the county is drained by Turtle Creek, which also flows into Illinois before joining the Rock River. Nearly all the lakes and ponds are in the northern one-third of the county, the area of most recent glaciation. The aquifers in Rock County are of sedimentary origin and include deeply buried sandstones, shales, and dolomites of the Upper Cambrian series. This series overlies crystalline rocks of Precambrian age and supplies water to all the cities and villages in the county. The St. Peter sandstone of Ordovician age underlies all Rock County except where the formation has been removed by erosion in the Rock and Sugar River valleys, and perhaps in Coon Creek valley. The St. Peter sandstone is the principal source of water for domestic, stock, and small industrial wells in the western half of the county. This sandstone also yields some water to uncased wells that tap the deeper rocks of the Upper Cambrian series. East of the Rock River the Platteville, Decorah, and Galena formations undifferentiated, or Platteville-Galena unit, is the principal source of water for domestic and stock wells. Unconsolidated deposits of glacial origin cover most of Rock County and supply water to many small wells. In the outwash deposits along the Rock River, wells of extremely high capacity have been developed for industrial and municipal use. The most significant feature of the bedrock surface in Rock County is the ancestral Rock River valley, which has been filled with glacial outwash to a depth of at least 396 feet below the present land surface. East of the buried valley the bedrock has a fiat, relatively undissected surface. West of the valley the bedrock surface is rugged and greatly dissected. Ground water in Rock County occurs under both water-table and artesian conditions; however, because of the interconnection and close relation of all ground water in the county, the entire system is considered to be a single groundwater body whose surface may be represented by one piezometric map. Recharge occurs locally, throughout the county. Nearly all recharge is derived directly from precipitation that percolates downward to become a part of the groundwater body. Natural movement of water in the consolidated water-bearing units is generally toward the buried Rock and Sugar River valleys. Movement of water in the sandstones of Cambrian age was calculated to be about 44 million gallons a day toward the Rock River. Discharge from wells in Rock County in 1957 was about 23 million gallons a day. Nearly 90 percent of this water was drawn from the area along the Rock River. Drilled wells, most of which were drilled by the cable-tool method, range in diameter from 3 to 26 inches, and in depth from 46 to 1,225 feet. Driven wells in alluvium and glacial drift are usually 1? to 2? in

Role of Precambrian compositions and fabrics in the development of foreland structures, southern Front Range, Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chase, R.B.

1985-01-01

The Front Range terminates to the south as three basement-cored uplifts located north and west of the Canon City embayment. Precambrian units consist of foliated and non-foliated granitic rocks, augen gneiss, interlayered schist and gneiss, amphibolite, quartzite, and pegmatite. Precambrian deformations include at least three phases of folding, two phases of crenulation cleavage development, and local mylonitization. Metamorphic conditions reached those of cordierite-sillimanite grade. Paleozoic and Mesozoic sediments surround and overlap the exposed uplifts to form south-plunging arches. Excellent three-dimensional exposure of structural relationships between Precambrian rocks and overlying Phanerozoic sediments is present. Deformation styles in the sedimentary cover aremore » strongly influenced by underlying Precambrian lithologies and structural orientations. Where the crystalline units are granitic, with steeply-dipping foliation or no directional fabric, uplifts are bounded by high angle faults. Some such faults show evidence of repeated movements and reversals dating back to Precambrian time. The boundary between mechanical basement and suprastructure is clearly not defined as the base of the sedimentary section. Balanced cross-sections constructed through the southern Front Range must include contemporaneous flexural folds and thrusts in Precambrian schistose and gneissic rocks as well as in Phanerozoic sedimentary layers.« less

Potential Hydrogen Yields from Ultramafic Rocks of the Coast Range Ophiolite and Zambales Ophiolite: Inferences from Mössbauer Spectroscopy

NASA Astrophysics Data System (ADS)

Stander, A.; Nelms, M.; Wilkinson, K.; Dyar, M. D.; Cardace, D.

2013-12-01

The reduced status of mantle rocks is a possible controller and indicator of deep life habitat, due to interactions between water and ultramafic (Fe, Mg-rich) minerals, which, under reducing conditions, can yield copious free hydrogen, which is an energy source for rock-hosted chemosynthetic life. In this work, Mössbauer spectroscopy was used to parameterize the redox status of Fe in altering peridotites of the Coast Range Ophiolite (CRO) in California, USA and Zambales Ophiolite (ZO) in the Philippines. Fe-bearing minerals were identified and data were collected for the percentages of Fe(III)and Fe(II)and bulk Fe concentration. Thin section analysis shows that relict primary olivines and spinels generally constitute a small percentage of the ZO and CRO rock, and given satisfactory estimates of the volume of the ultramafic units of the ZO and CRO, a stoichiometric H2 production can be estimated. In addition, ZO serpentinites are ~63,000 ppm Fe in bulk samples; they contain ~41-58% Fe(III)and ~23-34% Fe(II) in serpentine and relict minerals along with ~8-30% of the total Fe as magnetite. CRO serpentinites are ~42,000 ppm Fe in bulk samples; they contain ~15-50% Fe(III), ~22-88% Fe(II) in serpentine and relict minerals, and ~0-52% of total Fe is in magnetite (Fe(II)Fe(III)2O4). Assuming stoichiometric production of H2, and given the following representation of serpentinization 2(FeO)rock + H2O → (Fe2O3)rock +H2, we calculated the maximum quantity of hydrogen released and yet to be released through the oxidation of Fe(II). Given that relatively high Fe(III)/Fetotal values can imply higher water:rock ratios during rock alteration (Andreani et al., 2013), we can deduce that ZO ultramafics in this study have experienced a net higher water:rock ratio than CRO ultramafics. We compare possible H2 yields and contrast the tectonic and alteration histories of the selected ultramafic units. (M. Andreani, M. Muñoz, C. Marcaillou, A. Delacour, 2013, μXANES study of iron redox state in serpentine during oceanic serpentinization, Lithos, Available online 20 April 2013)

Numerical modeling of perched water under Yucca Mountain, Nevada

USGS Publications Warehouse

Hinds, J.J.; Ge, S.; Fridrich, C.J.

1999-01-01

The presence of perched water near the potential high-level nuclear waste repository area at Yucca Mountain, Nevada, has important implications for waste isolation. Perched water occurs because of sharp contrasts in rock properties, in particular between the strongly fractured repository host rock (the Topopah Spring welded tuff) and the immediately underlying vitrophyric (glassy) subunit, in which fractures are sealed by clays that were formed by alteration of the volcanic glass. The vitrophyre acts as a vertical barrier to unsaturated flow throughout much of the potential repository area. Geochemical analyses (Yang et al. 1996) indicate that perched water is relatively young, perhaps younger than 10,000 years. Given the low permeability of the rock matrix, fractures and perhaps fault zones must play a crucial role in unsaturated flow. The geologic setting of the major perched water bodies under Yucca Mountain suggests that faults commonly form barriers to lateral flow at the level of the repository horizon, but may also form important pathways for vertical infiltration from the repository horizon down to the water table. Using the numerical code UNSAT2, two factors believed to influence the perched water system at Yucca Mountain, climate and fault-zone permeability, are explored. The two-dimensional model predicts that the volume of water held within the perched water system may greatly increase under wetter climatic conditions, and that perched water bodies may drain to the water table along fault zones. Modeling results also show fault flow to be significantly attenuated in the Paintbrush Tuff non-welded hydrogeologic unit.

Geophysical studies of the Syncline Ridge area, Nevada Test Site, Nye County, Nevada

USGS Publications Warehouse

Hoover, D.B.; Hanna, W.F.; Anderson, L.A.; Flanigan, V.J.; Pankratz, L.W.

1982-01-01

A wide variety of geophysical methods were employed to study a proposed nuclear waste site at Syncline Ridge on the Nevada Test Site, Nev. The proposed site was believed to be a relatively undisturbed synclinal structure containing a thick argillite unit of Misslsslppian age, the Eleana Formation unit J, which would be the emplacement medium. Data acquisition for the geophysical studies was constrained because of rugged topography in a block of Tipplpah Limestone overlying the central part of the proposed site. This study employed gravity, magnetic, seismic refraction and reflection, and four distinct electrical methods to try and define the structural integrity and shape of the proposed repository medium. Detailed and regional gravity work revealed complex structure at the site. Magnetics helped only in identifying small areas of Tertiary volcanic rocks because of low magnetization of the rocks. Seismic refraction assisted in identifying near surface faulting and bedrock structure. Difficulty was experienced in obtaining good quality reflection data. This implied significant structural complexity but also revealed the principal features that were supported by other data. Electrical methods were used for fault identification and for mapping of a thick argillaceous unit of the Eleana Formation in which nuclear waste was to be emplaced. The geophysical studies indicate that major faults along the axis of Syncline Ridge and on both margins have large vertical offsets displacing units so as not only to make mining difficult, but also providing potential paths for waste migration to underlying carbonate aquifers. The Eleana Formation appeared heterogeneous, which was inferred to be due to structural complexity. Only a small region in the northwest part of the study area was found to contain a thick and relatively undisturbed volume of host rock.

A preliminary synthesis of structural, stratigraphic, and magnetic data from part of the northwest Adirondacks, New York

USGS Publications Warehouse

Foose, M.P.; Brown, C. Ervin

1976-01-01

Synthesis of recent work in the NW Adirondacks, New York allows the development of a coherent geologic picture. Mapping of the Precambrian rock units enables the recognition of four major units which are, from bottom to top, 1) Granitic Gneiss (alaskite), 2) Lower Marble, 3) Major Gneiss, and 4) Upper Marble. Additionally, lenses of amphibolite and granite occur as intrusives within this succession. These rock units have been complexly deformed by three major folding episodes, and by two distinctly different styles of faulting. The result has been to produce large northeast-southwest trending dome and basin structures. Patterns of magnetic intensity closely parallel distribution of rock units and provide additional information for a structural and stratigraphic synthesis-.

Is under the ground under the big blue water named for the land next to us good for putting away bad air?

NASA Astrophysics Data System (ADS)

Hills, D. J.

2017-12-01

Putting bad air under the ground in rocks can help the world be safe from hotter air and keep people happy. A lot of the bad air is made near the big blue water named for the land next to us so we are looking at the ground under that big blue water to see if the rocks will hold the bad air for a very, very, very long time. There are a lot of rocks that are good to put the bad air in with other good rocks on top of them to hold the bad air in under the ground under the big blue water. We are helping decide what good rocks are the best to put the bad air in with the best rocks on top of them to hold it in. We are figuring out how much bad air these rocks can hold in to keep people safe from hotter air and keep them happy. Some of these rocks are not far under the ground, but that might worry some people that the bad air is too close. Some of these good rocks are really far under the ground, but that might take a lot of money to put in the bad air. We are trying to figure out what will be best to keep the bad air under the ground and make the most people happy.

My Pet Rock

ERIC Educational Resources Information Center

Lark, Adam; Kramp, Robyne; Nurnberger-Haag, Julie

2008-01-01

Many teachers and students have experienced the classic pet rock experiment in conjunction with a geology unit. A teacher has students bring in a "pet" rock found outside of school, and the students run geologic tests on the rock. The tests include determining relative hardness using Mohs scale, checking for magnetization, and assessing luster.…

Rock-Bound Arsenic Influences Ground Water and Sediment Chemistry Throughout New England

USGS Publications Warehouse

Robinson, Gilpin R.; Ayotte, Joseph D.

2007-01-01

The information in this report was presented at the Northeastern Region Geological Society of America meeting held March 11-14, 2007, in Durham, New Hampshire. In the New England crystalline bedrock aquifer, concentrations of arsenic that exceed the drinking water standard of 10 ?g/L occur most frequently in ground water from wells sited in specific metamorphic and igneous rock units. Geochemical investigations indicate that these geologic units typically have moderately elevated whole-rock concentrations of arsenic compared to other rocks in the region. The distribution of ground water wells with As > 5 ?g/L has a strong spatial correlation with specific bedrock units where average whole-rock concentrations of arsenic exceed 1.1 mg/kg and where geologic and geochemical factors produce high pH ground water. Arsenic concentrations in stream sediments collected from small drainages reflect the regional distribution of this natural arsenic source and have a strong correlation with both rock chemistry and the distribution of bedrock units with elevated arsenic chemistry. The distribution of ground water wells with As > 5 ?g/L has a strong spatial correlation with the distribution of stream sediments where concentrations of arsenic exceed 6 mg/kg. Stream sediment chemistry also has a weak correlation with the distribution of agricultural lands where arsenical pesticides were used on apple, blueberry, and potato crops. Elevated arsenic concentrations in bedrock wells, however, do not correlate with agricultural areas where arsenical pesticides were used. These results indicate that both stream sediment chemistry and the solubility and mobility of arsenic in ground water in bedrock are influenced by host-rock arsenic concentrations. Stream sediment chemistry and the distribution of geologic units have been found to be useful parameters to predict the areas of greatest concern for elevated arsenic in ground water and to estimate the likely levels of human exposure to elevated arsenic in drinking water in New England. However, the extreme local variability of arsenic concentrations in ground water from these rock sources indicate that arsenic concentrations in ground water are affected by other factors in addition to arsenic concentrations in rock.

Geologic framework for the coal-bearing rocks of the Central Appalachian Basin

USGS Publications Warehouse

Chesnut, D.R.

1996-01-01

Coal production has been an important economic factor in the Central Appalachian Basin. However, regional stratigraphic and structural relationships of the coal-bearing rocks of the basin have been poorly understood due to numerous separate nomenclatural schemes employed by various states. In order to estimate coal resources and understand mechanisms controlling the distribution of coal within the basin, a reliable geologic framework is necessary. Seven detailed cross sections across the Central Appalachian Basin were constructed in order to examine the stratigraphic and structural framework of the coal-bearing rocks in the basin. The cross sections were based on more than 1000 oil and gas well logs, measured sections, and borehole information from Kentucky, Ohio, Tennessee, Virginia and West Virginia. The cross sections revealed three main points discussed here: southeast thickening of the Pennsylvanian strata, unconformable northwestward onlapping relationship of Lower Pennsylvanian strata over underlying Lower Pennsylvanian and Mississippian strata and regional continuity of beds. The cross sections, geologic mapping, coal-resource studies, extensive new highway exposures and the occurrence of tonstein beds indicate that many coal beds and marine strata are laterally extensive, albeit locally variable across the basin. Certain quartzose sandstone bodies are also extensive over large areas of the basin. Existing stratigraphic nomenclature schemes obscured the geologic framework of the basin, so a new unified nomenclature scheme was devised to better describe stratigraphic features of the basin. The new stratigraphic nomenclature, now only formalized for Kentucky, was based on key stratigraphic units that proved to be extensive across the basin. Lower and Middle Pennsylvanian rocks are now recognized as the Breathitt Group (the Breathitt Formation was elevated to group rank). The Breathitt Group was subdivided into eight coal-bearing formations by relatively thick marine strata, and, in the lower part of the Breathitt Group, by quartzose sandstone formations. The new coal-bearing units are formally ranked as formations and, in ascending order, are the Pocahontas, Bottom Creek, Alvy Creek, Grundy, Pikeville, Hyden, Four Corners and Princess Formations. The quartzose sandstone units are also formally ranked as formations and are, in ascending order, the Warren Point, Sewanee, Bee Rock and Corbin Sandstones. The sandstone formations were previously recognized units in some states, but have been extended (formally in Kentucky) across the basin. The key stratigraphic marine units are formally ranked as members, and are, in ascending order, the Betsie Shale Member, the Kendrick Shale Member, Magoffin Member and Stoney Fork Member.

Rock pushing and sampling under rocks on Mars

USGS Publications Warehouse

Moore, H.J.; Liebes, S.; Crouch, D.S.; Clark, L.V.

1978-01-01

Viking Lander 2 acquired samples on Mars from beneath two rocks, where living organisms and organic molecules would be protected from ultraviolet radiation. Selection of rocks to be moved was based on scientific and engineering considerations, including rock size, rock shape, burial depth, and location in a sample field. Rock locations and topography were established using the computerized interactive video-stereophotogrammetric system and plotted on vertical profiles and in plan view. Sampler commands were developed and tested on Earth using a full-size lander and surface mock-up. The use of power by the sampler motor correlates with rock movements, which were by plowing, skidding, and rolling. Provenance of the samples was determined by measurements and interpretation of pictures and positions of the sampler arm. Analytical results demonstrate that the samples were, in fact, from beneath the rocks. Results from the Gas Chromatograph-Mass Spectrometer of the Molecular Analysis experiment and the Gas Exchange instrument of the Biology experiment indicate that more adsorbed(?) water occurs in samples under rocks than in samples exposed to the sun. This is consistent with terrestrial arid environments, where more moisture occurs in near-surface soil un- der rocks than in surrounding soil because the net heat flow is toward the soil beneath the rock and the rock cap inhibits evaporation. Inorganic analyses show that samples of soil from under the rocks have significantly less iron than soil exposed to the sun. The scientific significance of analyses of samples under the rocks is only partly evaluated, but some facts are clear. Detectable quantities of martian organic molecules were not found in the sample from under a rock by the Molecular Analysis experiment. The Biology experiments did not find definitive evidence for Earth-like living organisms in their sample. Significant amounts of adsorbed water may be present in the martian regolith. The response of the soil from under a rock to the aqueous nutrient in the Gas Exchange instrument indicates that adsorbed water and hydrates play an important role in the oxidation potential of the soil. The rock surfaces are strong, because they did not scratch, chip or spall when the sampler pushed them. Fresh surfaces of soil and the undersides of rocks were exposed so that they could be imaged in color. A ledge of soil adhered to one rock that tilted, showing that a crust forms near the surface of Mars. The reason for low amounts of iron in the sampIes from under the rocks is not known at this time.

Possible detachment zone in Precambrian rocks of Kanjamalai Hills, Cauvery Suture Zone, Southern India: Implications to accretionary tectonics

NASA Astrophysics Data System (ADS)

Mohanty, D. P.; Chetty, T. R. K.

2014-07-01

Existence of a possible detachment zone at Elampillai region, NW margin of Kanjamalai Hills, located in the northern part of Cauvery Suture Zone (CSZ), Southern India, is reported here for the first time. Detailed structural mapping provides anatomy of the zone, which are rarely preserved in Precambrian high grade terranes. The detachment surface separates two distinct rock units of contrasting lithological and structural characters: the upper and lower units. The detachment zone is characterized by a variety of fold styles with the predominance of tight isoclinal folds with varied plunge directions, limb rotations and the hinge line variations often leading to lift-off fold like geometries and deformed sheath folds. Presence of parasitic folding and associated penetrative strains seem to be controlled by differences in mechanical stratigraphy, relative thicknesses of the competent and incompetent units, and the structural relief of the underlying basement. Our present study in conjunction with other available geological, geochemical and geochronological data from the region indicates that the structures of the detachment zone are genetically related to thrust tectonics forming a part of subduction-accretion-collision tectonic history of the Neoproterozoic Gondwana suture.

Probability distributions of hydraulic conductivity for the hydrogeologic units of the Death Valley regional ground-water flow system, Nevada and California

USGS Publications Warehouse

Belcher, Wayne R.; Sweetkind, Donald S.; Elliott, Peggy E.

2002-01-01

The use of geologic information such as lithology and rock properties is important to constrain conceptual and numerical hydrogeologic models. This geologic information is difficult to apply explicitly to numerical modeling and analyses because it tends to be qualitative rather than quantitative. This study uses a compilation of hydraulic-conductivity measurements to derive estimates of the probability distributions for several hydrogeologic units within the Death Valley regional ground-water flow system, a geologically and hydrologically complex region underlain by basin-fill sediments, volcanic, intrusive, sedimentary, and metamorphic rocks. Probability distributions of hydraulic conductivity for general rock types have been studied previously; however, this study provides more detailed definition of hydrogeologic units based on lithostratigraphy, lithology, alteration, and fracturing and compares the probability distributions to the aquifer test data. Results suggest that these probability distributions can be used for studies involving, for example, numerical flow modeling, recharge, evapotranspiration, and rainfall runoff. These probability distributions can be used for such studies involving the hydrogeologic units in the region, as well as for similar rock types elsewhere. Within the study area, fracturing appears to have the greatest influence on the hydraulic conductivity of carbonate bedrock hydrogeologic units. Similar to earlier studies, we find that alteration and welding in the Tertiary volcanic rocks greatly influence hydraulic conductivity. As alteration increases, hydraulic conductivity tends to decrease. Increasing degrees of welding appears to increase hydraulic conductivity because welding increases the brittleness of the volcanic rocks, thus increasing the amount of fracturing.

Lithological architecture and petrography of the Mako Birimian greenstone belt, Kédougou-Kéniéba Inlier, eastern Senegal

NASA Astrophysics Data System (ADS)

Dabo, Moussa; Aïfa, Tahar; Gning, Ibrahima; Faye, Malick; Ba, Mamadou Fallou; Ngom, Papa Malick

2017-07-01

The new lithological and petrographic data obtained in the Mako sector are analyzed in the light of the geochemical data available in the literature. It consists of ultramaic, mafic rocks of tholeiitic affinities associated with intermediate and felsic rocks of calc-alkaline affinities and with intercalations of sedimentary rocks. The whole unit is intruded by Eburnean granitoids and affected by a greenschist to amphibolite facies metamorphism related to a high grade hydrothermalism. It consists of: (i) ultramafic rocks composed of a fractional crystallization succession of lherzolites, wehrlites and pyroxenites with mafic rock inclusions; (ii) layered, isotropic and pegmatitic metagabbros which gradually pass to metabasalts occur at the top; (iii) massive and in pillow metabasalts with locally tapered vesicles, completely or partially filled with quartzo-feldspathic minerals; (iv) quarzites locally overlying the mafic rocks and thus forming the top of the lower unit. This ultramafic-mafic lower unit presents a tholeiitic affinity near to the OIB or N-MORB. It represents the Mako Ophiolitic Complex (MOC), a lithospheric fragment of Birimian lithospheric crust. The upper unit is a mixed volcanic complex arranged in the tectonic corridors. From bottom to top it comprises the following: (i) andesitic, and (ii) rhyodacitic and rhyolitic lava flows and tuffs, respectively. They present a calc-alkaline affinity of the active margins. Three generations of Eburnean granitoids are recognized: (i) early (2215-2160 Ma); (ii) syn-tectonics (2150-2100 Ma) and post-tectonics (2090-2040 Ma). The lithological succession, geochemical and metamorphic characteristics of these units point to an ophiolitic supra-subduction zone.

50 CFR 622.225 - Harvest limitations.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... (a) Aquacultured live rock. In the South Atlantic EEZ: (1) Aquacultured live rock may be harvested only under a permit, as required under § 622.220(a)(3), and aquacultured live rock on a site may be... aquacultured live rock permit for the site. A person harvesting aquacultured live rock is exempt from the...

50 CFR 622.225 - Harvest limitations.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... (a) Aquacultured live rock. In the South Atlantic EEZ: (1) Aquacultured live rock may be harvested only under a permit, as required under § 622.220(a)(3), and aquacultured live rock on a site may be... aquacultured live rock permit for the site. A person harvesting aquacultured live rock is exempt from the...

Petroleum geology and resources of the middle Caspian Basin, Former Soviet Union

USGS Publications Warehouse

Ulmishek, Gregory F.

2001-01-01

The Middle Caspian basin occupies a large area between the Great Caucasus foldbelt and the southern edge of the Precambrian Russian craton. The basin also includes the central part of the Caspian Sea and the South Mangyshlak subbasin east of the sea. The basin was formed on the Hercynian accreted terrane during Late Permian?Triassic through Quaternary time. Structurally, the basin consists of the fold-and-thrust zone of the northern Caucasus foothills, the foredeep and foreland slope, the Stavropol-Prikumsk uplift and East Manych trough to the north of the slope, and the South Mangyshlak subbasin and slope of the Karabogaz arch east of the Caspian Sea. All these major structures extend offshore. Four total petroleum systems (TPS) have been identified in the basin. The South Mangyshlak TPS contains more than 40 discovered fields. The principal reserves are in Lower?Middle Jurassic sandstone reservoirs in structural traps. Source rocks are poorly known, but geologic data indicate that they are in the Triassic taphrogenic sequence. Migration of oil and gas significantly postdated maturation of source rocks and was related to faulting and fracturing during middle Miocene to present time. A single assessment unit covers the entire TPS. Largest undiscovered resources of this assessment unit are expected in the largely undrilled offshore portion of the TPS, especially on the western plunge of the Mangyshlak meganticline. The Terek-Caspian TPS occupies the fold-and-thrust belt, foredeep, and adjoining foreland slope. About 50 hydrocarbon fields, primarily oil, have been discovered in the TPS. Almost all hydrocarbon reserves are in faulted structural traps related to thrusting of the foldbelt, and most traps are in frontal edges of the thrust sheets. The traps are further complicated by plastic deformation of Upper Jurassic salt and Maykop series (Oligocene? lower Miocene) shale. Principal reservoirs are fractured Upper Cretaceous carbonates and middle Miocene sandstones. Principal source rocks are organic-rich shales in the lower part of the Maykop series. Source rocks may also be present in the Eocene, Upper Jurassic, and Middle Jurassic sections, but their contribution to discovered reserves is probably small. Three assessment units are delineated in the TPS. One of them encompasses the thrust-and-fold belt of northern Caucasus foothills. This assessment unit contains most of the undiscovered oil resources. The second assessment unit occupies the foredeep and largely undeformed foreland slope. Undiscovered resources of this unit are relatively small and primarily related to stratigraphic traps. The third unit is identified in almost untested subsalt Jurassic rocks occurring at great depths and is speculative. The unit may contain significant amounts of gas under the Upper Jurassic salt seal. The Stavropol-Prikumsk TPS lies north of the Terek-Caspian TPS and extends offshore into the central Caspian Sea where geologic data are scarce. More than one hundred oil and gas fields have been found onshore. Offshore, only one well was recently drilled, and this well discovered a large oil and gas field. Almost the entire sedimentary section of the TPS is productive; however, the principal oil reserves are in Lower Cretaceous clastic reservoirs in structural traps of the Prikumsk uplift. Most original gas reserves are in Paleogene reservoirs of the Stavropol arch and these reservoirs are largely depleted. At least three source rock formations, in the Lower Triassic, Middle Jurassic, and Oligocene?lower Miocene (Maykop series), are present in the TPS. Geochemical data are inadequate to correlate oils and gases in most reservoirs with particular source rocks, and widespread mixing of hydrocarbons apparently took place. Three assessment units encompassing the onshore area of the TPS, the offshore continuation of the Prikumsk uplift, and the central Caspian area, are identified. The

Using of Stone Flour from Some Mineral Rocks in Modern Concrete

NASA Astrophysics Data System (ADS)

Roman, Moskvin; Elena, Belyakova; Marina, Moroz

2018-03-01

There is shown the possibility of using mill ground rocks in SCC without deterioration of rheological properties of concrete mixtures. Obtained high-strength concrete of the new generation with high technical and economic indices and low unit costs per unit of cement strength.

The andean ophiolitic megastructures on the Buga-Buenaventura transverse (Western Cordillera—Valle Colombia)

NASA Astrophysics Data System (ADS)

Bourgois, Jacques; Calle, Bernardo; Tournon, Jean; Toussaint, Jean-François

1982-02-01

A structural study of the Buga-Buenaventura transverse in the central part of the Western Cordillera of Colombia, has shown the presence of three structural units which, from bottom to top and from west to east, are: the Rio Dagua unit, the Rio Calima unit, and the Loboguerrero window unit. All three units comprise strata between 120 and 80 m.y. old overlying a basement of green rocks showing the characteristics of submarine flows. The Bolivar ultrabasic and basic massif is geographically linked to the Rio Calima unit, in which green rocks predominate, and is separated from it by a tectonic contact. The upper part of the massif, on the other hand, shows high-temperature metamorphic rocks formed during its emplacement. The Rio Dagua unit shows two tectonic phases with isoclinal folding and development of schistosity. The first phase is contemporaneous with low-grade metamorphism equivalent to lower greenschist facies conditions. The Loboguerrero window unit shows a large recumbent fold oriented towards the southeast. Deformation in the Rio Calima unit is weaker and appears to correspond to a higher structural level than in the two other units. As the attitudes of the S1, schistosity in the Rio Dagua unit and of the shear zones located at the green rocks-sediments contact in this same unit are similar to that of the overthrust at the base of the Rio Calima unit, we are led to postulate that the overthrust belongs to the first phase of deformation, as also does the recumbent fold in the Loboguerrero window unit. We are thus led to propose a southeastward direction of emplacement for the nappes in the Western Cordillera of Colombia. In conclusion, the authors extend their observations and propose a new structural interpretation of the "Occidente Colombiano".

Relationships between data from Rock-Eval pyrolysis and proximate, ultimate, petrographic, and physical analyses of 142 diverse U.S. coal samples

USGS Publications Warehouse

Bostick, N.H.; Daws, T.A.

1994-01-01

Basic research on coal and oil shale led to automated pyrolysis analysis of petroleum source rocks; most widely used is the Rock-Eval equipment. In order to interpret Rock-Eval analyses in relation to traditional coal data, we analyzed 142 commercial coals with diverse rank, age, maceral and sulfur contents, for most regions of the United States. We compared the Rock-Eval data with traditional industrial coal data, including volatile matter, calorific value, hydrogen and oxygen content, free swelling index, and vitrinite reflectance. We found: (1) there is a close relationship between Tmax and vitrinite reflectance in the ranges 420-590??C Tmax and 0.4-3%Romax of most coals. (2) A close relationship between Tmax and volatile matter (%VM) extends through the entire sample range, including low-rank samples with 35-70% VM, a range where %VM is not considered to be a useful rank parameter. (3) TOC of medium- and high-rank coals is seriously under-measured by Rock-Eval; TOC of low-rank coals (less than 0.8%Romax) is close to "dry basis" carbon from ultimate analysis. (4) The direct relationships between oxygen index (OI) and %O and between hydrogen index (HI) and %H are clear, though only broadly defined. However, there is virtually no band of concentrated data points on the HI versus OI pseudo-Van Krevelen diagram comparable to the "development line" on the H/C versus O/C diagram. (5) There are systematic relationships between Rock-Eval and industrial coal parameters such as calorific value and FSI, but much standardization would be needed before Rock-Eval could find a place in the coal industry. Tests with blends of coal and quartz sand and with various loads of coal alone showed that the amount of organic matter in the Rock-Eval load greatly influences results. Total load in the crucible, if largely inert, plays a small role, however. Increasing absolute or relative coal content causes under-evaluation of Rock-Eval TOC and over-rating of hydrogen. Blends of several coals yielded hydrogen and oxygen indexes related proportionally to the properties of the individual coals, but Tmax is not raised by addition of high-rank coal until over 40% is added. ?? 1994.

Chemical Composition of Rocks and Soils at Gusev and Meridiani Landing Sites of the Mars Exploration Rovers: APXS Results and Implications.

NASA Astrophysics Data System (ADS)

Zipfel, J.; Team, A. S.

2004-12-01

The Alpha-Particle X-ray Spectrometers (APXS) are part of the instrument suites of both Mars Exploration Rovers, Spirit and Opportunity, which landed on Mars at Gusev crater and Meridiani Planum in the beginning of 2004. They are in-situ instruments for the determination of major and minor elements of soils, rocks, and outcrops. Soils at these landing sites are chemically characterized by high sulfur and chlorine contents, similar to soils at previous landing sites. Abundances of major and minor elements of all soils are very similar, strongly supporting the concept of global distribution and thorough mixing of soils on Mars. Locally, minor deviations from average soil composition are observed. These are attributed to the addition of local components to "global soil". In one trench at Gusev crater magnesium and sulfur concentrations increase with depth and give direct evidence for magnesium sulfate, possibly formed by weathering of olivine under acidic conditions, and local redistribution processes. Rocks at Gusev crater plains are primitive magnesium-rich basaltic rocks with normative olivine. They are coated to varying degrees with soil/dust and alteration rinds. Highly mobile elements are enriched in these outer layers. Outcrop materials at the base of the Colombia Hill site are possibly basaltic or volcaniclastic rocks. They are chemically highly altered as reflected by very high concentrations of water soluble elements (S, Cl, and Br), observed even after removal of a more than 8 mm thick surface layer. Apparently, the alteration extends to much greater depth. Outcrops at the Opportunity landing site were analyzed in Eagle crater and Endurance crater. These are light-toned sedimentary rocks of siliciclastic materials with up to 40 weight percent of sulfates. Based on mass balance calculations, in addition to Mg-sulfate and jarosite, other sulfates, e.g., Ca- and Al-bearing sulfates must be present. Outcrop rocks in Eagle crater are enriched in bromine relative to chlorine to varying degrees. Rocks in Endurance crater are stratigraphically layered sediments, possibly deposited under aqueous and aeolian conditions. The silicate to sulfate ratio of these units increases with depth. Vein fillings have high bromine concentrations. The chemical composition of rocks, soils and outcrops analyzed at both landing sites provides clear evidence for water-rock interaction and the presence of water over an extended period of time.

Lithogeochemical character of near-surface bedrock in the New England coastal basins

USGS Publications Warehouse

Robinson, Gilpin R.; Ayotte, Joseph D.; Montgomery, Denise L.; DeSimone, Leslie A.

2002-01-01

This geographic information system (GIS) data layer shows the generalized lithologic and geochemical, termed lithogeochemical, character of near-surface bedrock in the New England Coastal Basin (NECB) study area of the U.S. Geological Survey's National Water Quality Assessment (NAWQA) Program. The area encompasses 23,000 square miles in western and central Maine, eastern Massachusetts, most of Rhode Island, eastern New Hampshire and a small part of eastern Connecticut. The NECB study area includes the Kennebec, Androscoggin, Saco, Merrimack, Charles, and Blackstone River Basins, as well as all of Cape Cod. Bedrock units in the NECB study area are classified into lithogeochemical units based on the relative reactivity of their constituent minerals to dissolution and the presence of carbonate or sulfide minerals. The 38 lithogeochemical units are generalized into 7 major groups: (1) carbonate-bearing metasedimentary rocks; (2) primarily noncalcareous, clastic sedimentary rocks with restricted deposition in discrete fault-bounded sedimentary basins of Mississipian or younger age; (3) primarily noncalcareous, clastic sedimentary rocks at or above biotite-grade of regional metamorphism; (4) mafic igneous rocks and their metamorphic equivalents; (5) ultramafic rocks; (6) felsic igneous rocks and their metamorphic equivalents; and (7) unconsolidated and poorly consolidated sediments.

Geochronology and Structural Studies in the Northern Ritter Range: Implications for the Tectonic History of Mesozoic Sierra Nevada Arc

NASA Astrophysics Data System (ADS)

Black, C. J.; Whitesides, A. S.; Anderson, J. L.; Culbert, K. N.; Vandeveer, M.; Cox, I. V.; Cardamone, J.; Torrez, G.; Quirk, M.; Memeti, V.; Cao, W.; Paterson, S. R.

2010-12-01

Field mapping in the Northern Ritter Range pendant, central Sierra Nevada reveals four different lithotectonic units. Unit 1, east of Gem Lake, consists of Paleozoic passive margin metasedimentary rocks. Unit 2 lies unconformably above and west and is composed of Late Triassic to Middle Jurassic rhyolitic to andesitic, clast-rich, metavolcanic rocks that are typically massive, thick bedded, relatively homogeneous. Breccias and millimeter sized plagioclase phenocrysts are common in these beds. Unit 3 west of and structurally higher than unit 2 and is composed of thinly bedded metavolcanic and metasedimentary rocks of same age. Unit 2 and Unit 3 both steeply dipping and NW striking bedding and bedding parallel foliations. Unit 4 is composed of less deformed, Cretaceous, rhyolitic to andesitic breccias and rare volcaniclastic units that are west of and unconformably above unit 3. All units are now separated by faults. The Cretaceous dextral, oblique Gem Lake shear zone reactivated the uncomformity between units 1 and 2. West of the shear zone, both the shearing and strain intensity gradually decrease, the later from >60% to 40% shortening. Unit 2 and 3 are separated by a thrust fault, with local pseudotachelite now overprinted by ductile deformation. Unit 3 and 4 are now juxtaposed along a deformed unconformity west of which strain decreases to shortening values > 30%. These host rocks are intruded by granitic to dioritic plutons preserving a wide range of internal characteristics and emplacement styles. The oldest pluton is the 100 Ma Rush Creek Granodiorite, which intruded into unit 2. The Kuna Crest (KC, 94.6 Ma), the Waugh Lake (WL, 93.6 Ma), and the Thousand Island Lake leucogranodiorites (TIL) (~94 Ma) all intrude into the unit 3. The TIL cut the unconformity between units 3 and 4. The WL pluton is possibly cut by movement between units 2 and 3. The typically NW striking steeply dipping bedding in host rock units is dramatically deflected to EW orientations along the SW margin of the KC lobe. Within the nearby WL Granodiorite, hundreds of andesitic host rock blocks, some up to hundred meter lengths suggest that stoping was an important emplacement process. Migmatitic zones occur along several pluton margins. Our observations are consistent with aspects of the Tobisch et al. (2000) paper suggesting early brittle thrusting led to rotation of beds to steep dips. However our results indicate that beds were already at near vertical dips prior to ductile shortening and well before pluton emplacement. And although regional downward flow of extrusive volcanics has certainly occurred we see evidence against previous suggestions that this downward flow was localized in pluton aureoles as plutons typically cut discordantly across already steeply dipping beds and in turn are deformed by the younger ductile deformation. Although ductile shortening may play a minor role in rotation of beds, much of the ductile deformation had to occur after beds were steeply dipping as the 100-93.5 m.y. plutons have fabrics that are continuous with ductile deformation in the host rocks.

Small-Town Rock Trade

ERIC Educational Resources Information Center

Robarge, Thomas J.

1977-01-01

Describes an eighth grade rock exchange project in which small groups of students researched, then wrote letters to schools throughout the United States requesting samples of local rocks and minerals. Provides experience in use of the atlas and letter writing. (CS)

Geophysical delineation of Mg-rich ultramafic rocks for mineral carbon sequestration

USGS Publications Warehouse

McCafferty, Anne E.; Van Gosen, Bradley S.; Krevor, Sam C.; Graves, Chris R.

2009-01-01

This presentation covers three general topics: (1) description of a new geologic compilation of the United States that shows the location of magnesium-rich ultramafic rocks in the conterminous United States; (2) conceptual illustration of the potential ways that ultramafic rocks could be used to sequester carbon dioxide; and (3) description of ways to use geophysical data to refine and extend the geologic mapping of ultramafic rocks and to better characterize their mineralogy.The geophysical focus of this research is twofold. First, we illustrate how airborne magnetic data can be used to map the shallow subsurface geometry of ultramafic rocks for the purpose of estimating the volume of rock material available for mineral CO2 sequestration. Secondly, we explore, on a regional to outcrop scale, how magnetic mineralogy, as expressed in magnetic anomalies, may vary with magnesium minerals, which are the primary minerals of interest for CO2 sequestration. 

Experimental Investigation of the Influence of Confining Stress on Hard Rock Fragmentation Using a Conical Pick

NASA Astrophysics Data System (ADS)

Li, Xibing; Wang, Shaofeng; Wang, Shanyong

2018-01-01

High geostress is a prominent condition in deep excavations and affects the cuttability of deep hard rock. This study aims to determine the influence of confining stress on hard rock fragmentation as applied by a conical pick. Using a true triaxial test apparatus, static and coupled static and dynamic loadings from pick forces were applied to end faces of cubic rock specimens to break them under biaxial, uniaxial and stress-free confining stress conditions. The cuttability indices (peak pick force, insertion depth and disturbance duration), failure patterns and fragment sizes were measured and compared to estimate the effects of confining stress. The results show that the rock cuttabilities decreased in order from rock breakages under stress-free conditions to uniaxial confining stress and then to biaxial confining stress. Under biaxial confining stress, only flake-shaped fragments were stripped from the rock surfaces under the requirements of large pick forces or disturbance durations. As the level of uniaxial confining stress increased, the peak pick force and the insertion depth initially increased and then decreased, and the failure patterns varied from splitting to partial splitting and then to rock bursts with decreasing average fragment sizes. Rock bursts will occur under elastic compression via ultra-high uniaxial confining stresses. There are two critical uniaxial confining stress levels, namely stress values at which peak pick forces begin to decrease and improve rock cuttability, and those at which rock bursts initially occur and cutting safety decreases. In particular, hard rock is easiest to split safely and efficiently under stress-free conditions. Moreover, coupled static preloading and dynamic disturbance can increase the efficiency of rock fragmentation with increasing preloading levels and disturbance amplitudes. The concluding remarks confirm hard rock cuttability using conical pick, which can improve the applicability of mechanical excavation in deep hard rock masses.

10 CFR 960.4-2-3 - Rock characteristics.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Rock characteristics. 960.4-2-3 Section 960.4-2-3 Energy... REPOSITORY Postclosure Guidelines § 960.4-2-3 Rock characteristics. (a) Qualifying condition. The present and expected characteristics of the host rock and surrounding units shall be capable of accommodating the...

Numerical simulation of rock fragmentation during cutting by conical picks under confining pressure

NASA Astrophysics Data System (ADS)

Li, Xuefeng; Wang, Shibo; Ge, Shirong; Malekian, Reza; Li, Zhixiong

2017-12-01

In this article, the effect of confining pressure on rock fragmentation process during cutting was investigated by numerical simulation with a discrete element method (DEM). Four kinds of sandstones with different physical properties were simulated in the rock cutting models under different confining pressures. The rock fragmentation process, the cutting force, and the specific energy under different confining pressures were analyzed. With the increase in confining pressure and rock strength, the vertical propagation of cracks was restrained. Rock samples were compacted and strengthened by confining pressure resulting in the increase of the cutting force. The specific energy of rock cutting linearly increased with the increase of the confining pressure ratio.

Aquifer-nomenclature guidelines

USGS Publications Warehouse

Laney, R.L.; Davidson, C.B.

1986-01-01

Guidelines and recommendations for naming aquifers are presented to assist authors of geohydrological reports in the United States Geological Survey, Water Resources Division. The hierarchy of terms that is used for water- yielding rocks from largest to smallest is aquifer system, aquifer, and zone. If aquifers are named, the names should be derived from lithologic terms, rock-stratigraphic units, or geographic names. The following items are not recommended as sources of aquifer names: time-stratigraphic names, relative position, alphanumeric designations, depositional environment, depth of occurrence, acronyms, and hydrologic conditions. Confining units should not be named unless doing so clearly promotes understanding of a particular aquifer system. Sources of names for confining units are similar to those for aquifer names, i.e. lithologic terms, rock-stratigraphic units or geographic names. Examples of comparison charts and tables that are used to define the geohydrologic framework are included. Aquifers are defined in 11 hypothetical examples that characterize geohydrologic settings throughout the country. (Author 's abstract)

Relating rock avalanche morphology to emplacement processes

NASA Astrophysics Data System (ADS)

Dufresne, Anja; Prager, Christoph; Bösmeier, Annette

2015-04-01

The morphology, structure and sedimentological characteristics of rock avalanche deposits reflect both internal emplacement processes and external influences, such as runout path characteristics. The latter is mainly predisposed by topography, substrate types, and hydrogeological conditions. Additionally, the geological setting at the source slope controls, e.g. the spatial distribution of accumulated lithologies and hence material property-related changes in morphology, or the maximum clast size and amount of fines of different lithological units. The Holocene Tschirgant rock avalanche (Tyrol, Austria) resulted from failure of an intensely deformed carbonate rock mass on the southeast face of a 2,370-m-high mountain ridge. The initially sliding rock mass rapidly fragmented as it moved towards the floor of the Inn River valley. Part of the 200-250 x 106 m3 (Patzelt 2012) rock avalanche debris collided with and moved around an opposing bedrock ridge and flowed into the Ötz valley, reaching up to 6.3 km from source. Where the Tschirgant rock avalanche spread freely it formed longitudinal ridges aligned along motion direction as well as smaller hummocks. Encountering high topography, it left runup ridges, fallback patterns (i.e. secondary collapse), and compressional morphology (successively elevated, transverse ridges). Further evidence for the mechanical landslide behaviour is given by large volumes of mobilized valley-fill sediments (polymict gravels and sands). These sediments indicate both shearing and compressional faulting within the rock avalanche mass (forming their own morphological units through, e.g. in situ bulldozing or as distinctly different hummocky terrain), but also indicate extension of the spreading landslide mass (i.e. intercalated/injected gravels encountered mainly in morphological depressions between hummocks). Further influences on its morphology are given by the different lithological units. E.g. the transition from massive dolomite/limestone sequences to weaker siliciclastic and evaporitic beds (sand-/siltstones, rauhwacken) can be pinpointed on LiDAR shaded relief images of the rock avalanche deposit. Hence, several morphological signatures are clearly related to differences in mechanical behaviour of the involved lithologies, whereas others reflect particular emplacement modes of the same rock unit: e.g. rockslide motion versus rock avalanche spreading. Reference Patzelt G. 2012. The rock avalanches of Tschirgant and Haiming (Upper Inn Valley, Tyrol, Austria), comment on the map supply. (German language only). Jahrbuch der Geologischen Bundesanstalt 152(1-4): 13-24.

Peak Metamorphic Temperature Profile across Eastern Belt Franciscan, Northern California Coast Ranges

NASA Astrophysics Data System (ADS)

Schmidt, W. L.; Platt, J. P.

2017-12-01

Previous work done on metamorphic temperatures across the lawsonite-albite to blueschist facies rocks of the Eastern Belt of the Franciscan accretionary complex has relied on a combination of many methods, and suggests that temperature broadly increases from west to east. The Taliaferro Metamorphic Complex is an exception to this pattern and shows higher pressures, and possibly higher temperatures, than its surroundings. The exact location and nature of the faults separating accreted packets in the Eastern Belt is somewhat controversial. A recently calibrated low-temperature laser Raman geothermometer for use on carbonaceous material provides a uniform method of estimating peak metamorphic temperature across the eastern Franciscan and is here used to identify the position of major tectonic boundaries. Temperatures were obtained from exposures in Thomes Creek, Cottonwood Creek, Grindstone Creek, and the middle fork of the Eel River. Peak T in the South Fork Mountain Schist, the highest grade and easternmost unit in the Franciscan, is 310-375°C, whereas in immediately underlying lawsonite-albite facies rocks below the Log Springs thrust, peak T is 270 - 300°C. The Taliaferro Metamorphic Complex reached a peak temperature of 336°C, whereas the surrounding lawsonite-albite facies rocks yield peak temperatures as low as 232°C. Preliminary temperature profiles clearly allow the major faults bounding the Taliaferro Metamorphic Complex and the South Fork Mountain Schist to be located. Extension of the temperature profile has the potential to reveal further detail within these units and the lower grade rocks surrounding them.

Potential Lifestyles in Ancient Environments of Gusev Crater, Mars

NASA Technical Reports Server (NTRS)

DesMarais, David J.

2006-01-01

Habitable environments must sustain liquid water at least intermittently and also provide both chemical building blocks and useful sources of energy for life. Observations by Spirit rover indicate that conditions have probably been too dry to sustain life, at least since the emplacement of the extensive basalts that underlie the plains around the Columbia Memorial Station landing site. Local evidence of relatively minor aqueous alteration probably occurred under conditions where the activity of water was too low to sustain biological processes as we know them. In contrast, multiple bedrock units in West Spur and Husband Hill in the Columbia Wills have been extensively altered, probably by aqueous processes. The Fe in several of these units has been extensively oxidized, indicating that, in principle, any microbiota present during the aqueous alteration of these rocks could have obtained energy from Fe oxidation. Spirit discovered oliving-rich ultramafic rocks during her descent from Husband Hill southward into Inner Basin. Alteration of similar ultramafic rocks on Earth can yield H2 that can provide both energy and reducing power for microorganisms. Spirit s discovery of "salty" soil horizons rich in Fe and/or Mg is consistent with the aqueous dissolution and/or alteration of olivine. Such processes can oxidize Fe and also yield H2 under appropriate conditions. Very high S concentrations in these salty deposits indicate that soluble salts were mobilized by water and/or that S oxidation, a potential energy source for life, occurred. The Athena team has not yet established whether these salt components were deposited as large beds in ancient water bodies or, for example, were concentrated by more recent groundwater activity. Collectively these observations are consistent with the possibility that habitable environments existed at least intermittently in the distant geologic past.

Potentially Habitable Ancient Environments in Gusev Crater, Mars

NASA Technical Reports Server (NTRS)

DesMarais, David J.

2010-01-01

Habitable environments must sustain liquid water at least intermittently and also provide both chemical building blocks and useful sources of energy for life. Observations by Spirit rover indicate that conditions have probably been too dry to sustain life, at least since the emplacement of the extensive basalts that underlie the plains around the Columbia Memorial Station landing site. Local evidence of relatively minor aqueous alteration [1] probably occurred under conditions where the activity of water was too low to sustain biological processes as we know them. In contrast, multiple bedrock units in West Spur and Husband Hill in the Columbia Hills have been extensively altered. Patterns of elemental abundances are consistent with aqueous processes involving migrating fluids [2]. Fe in several of these units has been extensively oxidized [3]. Conceivably any microbiota present during the aqueous alteration of these rocks might have obtained energy from Fe oxidation. Spirit discovered olivine-rich ultramafic rocks during her descent from Husband Hill southward into Inner Basin. Alteration of similar ultramafic rocks on Earth can yield H2 that can provide both energy and reducing power for microorganisms. Spirit's discovery of deposits rich in ferric sulfate is consistent with the aqueous dissolution and/or alteration of olivine under acidic conditions [2] such as those associated with hydrothermal activity. The oxidation of iron and sulfur that can accompany such activity can be an energy source for life. Hydrothermal systems on Earth that sustain either acidic [4] or neutral to alkaline fluids [5] have been shown to provide this energy. Collectively the observations by Spirit rover are consistent with the possibility that habitable environments existed in Gusev crater at least intermittently in the distant geologic past.

Delineation of Magnesium-rich Ultramafic Rocks Available for Mineral Carbon Sequestration in the United States

USGS Publications Warehouse

Krevor, S.C.; Graves, C.R.; Van Gosen, B. S.; McCafferty, A.E.

2009-01-01

The 2005 Intergovernmental Panel on Climate Change report on Carbon Dioxide Capture and Storage suggested that a major gap in mineral carbon sequestration is locating the magnesium-silicate bedrock available to sequester CO2. It is generally known that silicate minerals with high concentrations of magnesium are suitable for mineral carbonation. However, no assessment has been made covering the entire United States detailing their geographical distribution and extent, or evaluating their potential for use in mineral carbonation. Researchers at Columbia University and the U.S. Geological Survey have developed a digital geologic database of ultramafic rocks in the continental United States. Data were compiled from varied-scale geologic maps of magnesium-silicate ultramafic rocks. These rock types are potentially suitable as source material for mineral carbon-dioxide sequestration. The focus of the national-scale map is entirely on suitable ultramafic rock types, which typically consist primarily of olivine and serpentine minerals. By combining the map with digital datasets that show non-mineable lands (such as urban areas and National Parks), estimates on potential depth of a surface mine, and the predicted reactivities of the mineral deposits, one can begin to estimate the capacity for CO2 mineral sequestration within the United States. ?? 2009 Elsevier Ltd. All rights reserved.

Petrophysical Rock Typing of Unconventional Shale Plays: A Case Study for the Niobrara Formation of the Denver-Julesburg (DJ) Basin

NASA Astrophysics Data System (ADS)

Kamruzzaman, A.; Prasad, M.

2015-12-01

The hydrocarbon-rich mudstone rock layers of the Niobrara Formation were deposited in the shallow marine environment and have evolved as overmature oil- or gas-prone source and reservoir rocks. The hydrocarbon production from its low-porosity, nano-darcy permeability and interbedded chalk-marl reservoir intervals is very challenging. The post-diagenetic processes have altered the mineralogy and pore structure of its sourcing and producing rock units. A rock typing analysis in this play can help understand the reservoir heterogeneity significantly. In this study, a petrophysical rock typing workflow is presented for the Niobrara Formation by integrating experimental rock properties with geologic lithofacies classification, well log data and core study.Various Niobrara lithofacies are classified by evaluating geologic depositional history, sequence stratigraphy, mineralogy, pore structure, organic content, core texture, acoustic properties, and well log data. The experimental rock measurements are conducted on the core samples recovered from a vertical well from the Wattenberg Field of the Denver-Julesburg (DJ) Basin. Selected lithofacies are used to identify distinct petrofacies through the empirical analysis of the experimental data-set. The grouped petrofacies are observed to have unique mineralogical properties, pore characteristics, and organic contents and are labelled as discrete Niobrara rock types in the study area.Micro-textural image analysis (FESEM) is performed to qualitatively examine the pore size distribution, pore types and mineral composition in the matrix to confirm the classified rock units. The principal component analysis and the cluster analysis are carried out to establish the certainty of the selected rock types. Finally, the net-to-pay thicknesses of these rock units are compared with the cumulative production data from the field to further validate the chosen rock types.For unconventional shale plays, the rock typing information can be used to locate hydrocarbon sweetspots, facilitate the placement of the horizontal section of the wells along the sweetspots, and can augment engineers' abilities on suitable well placement considerations. It can also help enhancing the effectiveness of the hydraulic fracture stimulation and completion operation.

Effects of groundwater flow on the distribution of biogenic gas in parts of the northern Great Plains of Canada and United States

USGS Publications Warehouse

Anna, Lawrence O.

2011-01-01

Parts of the northern Great Plains in eastern Montana and western North Dakota and southeastern Alberta and southwestern Saskatchewan, Canada, were studied as part of an assessment of shallow biogenic gas in Upper Cretaceous rocks.Parts of the northern Great Plains in eastern Montana and western North Dakota and southeastern Alberta and southwestern Saskatchewan, Canada, were studied as part of an assessment of shallow biogenic gas in Upper Cretaceous rocks. Large quantities of shallow biogenic gas are produced from low-permeability, Upper Cretaceous reservoirs in southeastern Alberta and southwestern Saskatchewan, Canada. Rocks of similar types and age produce sparingly in the United States except on large structures, such as Bowdoin dome and Cedar Creek anticline. Significant production also occurs in the Tiger Ridge area, where uplift of the Bearpaw Mountains created stratigraphic traps. The resource in Canada is thought to be a continuous, biogenic-gas-type accumulation with economic production in a variety of subtle structures and stratigraphic settings. The United States northern Great Plains area has similar conditions but only broad structural closures or stratigraphic traps associated with local structure have produced economically to date. Numerical flow modeling was used to help determine that biogenic gas in low-permeability reservoirs is held in place by high hydraulic head that overrides buoyancy forces of the gas. Modeling also showed where hydraulic head is greater under Tertiary capped topographic remnants rather than near adjacent topographic lows. The high head can override the capillary pressure of the rock and force gas to migrate to low head in topographically low areas. Most current biogenic gas production is confined to areas between mapped lineaments in the northern Great Plains. The lineaments may reflect structural zones in the Upper Cretaceous that help compartmentalize reservoirs and confine gas accumulations.

77 FR 58867 - Public Land Order No. 7799; Withdrawal of Public Land for the Rock Springs Administrative Site...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

...] Public Land Order No. 7799; Withdrawal of Public Land for the Rock Springs Administrative Site Addition..., including the United States mining laws, for a period of 20 years to protect the Rock Springs Administrative... improvements associated with development and maintenance of the Rock Springs Administrative Site addition. The...

Geochemical and Nd isotopic constraints for the origin of Late Archean turbidites from the Yellowknife area, Northwest Territories, Canada

NASA Astrophysics Data System (ADS)

Yamashita, Katsuyuki; Creaser, Robert A.

1999-10-01

A detailed geochemical and isotopic study of Late Archean turbidites and volcanic rocks from the Yellowknife area, Slave province, was undertaken to constrain the nature of exposed crust at the time of 2.6 to 2.7 Ga crustal consolidation. The ɛNdT values of the volcanic rocks range from +1.7 to -4.4. This variation can be produced by assimilation of pre-2.8 Ga basement by a depleted mantle-derived magma, possibly followed by fractional crystallization. The turbidites are typically metamorphosed to greenschist to amphibolite facies, and where metamorphosed to greenschist facies, different units of Bouma sequence can be observed. The different units of Bouma sequence were sampled and analyzed separately to evaluate the possible differences in geochemical and isotopic signatures. The geochemical data presented here is in accord with the previously proposed model that argues for a mixture of 20% mafic-intermediate volcanic rocks, +55% felsic volcanic rocks, and +25% granitic rocks as a source of these turbidites. However, our revised calculation with the new data presented here argues for 1 to 2% input from an ultramafic source, as well as somewhat higher input from mafic-intermediate volcanic sources in the upper shale units compared to the lower sand units. The ɛNdT values of the turbidites generally are lower in the upper shale units compared to the lower sand units. Detailed inspection of trace-element data suggest that this is not an artifact of rare earth element-rich heavy minerals concentrating in the lower sand units of the turbidites, but rather is a result of “unmixing” of detritus with different ɛNdT values during sediment transportation and deposition. The upper shale units of the turbidites are isotopically compatible with a derivation mainly from crustally contaminated volcanic rocks, similar to those exposed in the Yellowknife area. The lower sand units contain a higher proportion of westerly derived plutonic rock detritus, characterized by higher ɛNdT, suggesting that there are area(s) west of Yellowknife not underlain by older (2.8-4.0 Ga) basement. The trace-element characteristics of these turbidites (i.e., Cr, Ni, La, Th, Sc, Eu/Eu∗, and GdN/YbN) are distinct from those of typical post-Archean turbidites. This observation is consistent with the models that predict that the chemical composition of the upper continental crust was slightly different in the Archean compared to post-Archean time.

Detailed geomorphological mapping of debris-covered and rock glaciers in the Hólar area, Tröllaskagi Peninsula (northern Iceland).

NASA Astrophysics Data System (ADS)

Tanarro, Luis M.; Palacios, David; Zamorano, Jose J.; Andres, Nuria

2017-04-01

Most studies conducted on rock and debris-covered glaciers only include simplified geomorphological maps representing main units (ridges, furrows, front, and thermokarst depressions). The aim of this study is to develop a detailed geomorphological mapping of the Hóladalsjökull debris-covered glacier (65°42' N; 18°57' W) and the Fremri-Grjótárdalur rock glacier (65°43' N 19° W), located near Hólar, a village in the central area of the Trolläskagi peninsula (northern Iceland). The mapping process has been conducted using standard stereo-photointerpretation of aerial photographs and stereo-plotting of a topographic map at 1:2000 scale. Also, landforms have been represented in different transects. Lastly, the geomorphological map has been designed using the elevation digital model, and a 3D pdf file has been generated, allowing for better viewing and understanding the different units and their modelling. The geomorphological mapping of the Hóladalsjökull debris-covered glacier and the Fremri-Grjótárdalur rock glacier represents the prominent walls of their valley heads and their summits, which form a flat highland at 1,200-1,330 metres above sea level, covered by blockfield and patterned ground features. Rockfall and slide landforms are common processes at the foot of these 100-170 metre-high cirque-walls. Debris-covered glaciers and rock glaciers are born right under these walls, building up a spoon-shaped hollow around glacial ice, surrounded by young moraine ridges at their fronts. The dominant features in the Hóladalsjökull debris-covered glacier are large longitudinal ridges and furrows, stretching over 1.5 km in length in the central and western areas. Medium-sized thermokarst depressions (between 15-40 metres in diameter), often running parallel to the furrows, dot the surface of the debris-covered glacier. Parallel alternate ridges and furrows can be seen near the snout. Ridges are rugged and fall around 30-40 metres, with over 30 degree slopes, whereas furrows have smoother hillsides. The snout of the debris-covered glacier is around 900 m high. Several units of rock glaciers from different overlapping ages can be distinguished in the Fremri-Grjótárdalur cirque. Deep and meandering furrows have developed in the contact areas between the main lobes. The lobes of the youngest rock glaciers, located at the cirque head, reach a length of between 0.5 km and 1 km. Their morphology changes from their rooting zone, with alternate smooth furrows and ridges extending towards their front, where steep ridges and furrows appear, and ends in a steep front between 896 and 922 m high. These rock glaciers overlap one another on a fossil rock glacier, rising another 400 m until they reach a height of 850 m. Research funded by Deglaciation project (CGL2015-65813-R), Government of Spain

Geochemical characterization of slags, other mines wastes, and their leachates from the Elizabeth and Ely mines (Vermont), the Ducktown mining district (Tennessee), and the Clayton smelter site (Idaho)

USGS Publications Warehouse

Piatak, Nadine M.; Seal, Robert R.; Hammarstrom, Jane M.; Meier, Allen L.; Briggs, Paul H.

2003-01-01

Waste-rock material produced at historic metal mines contains elevated concentrations of potentially toxic trace elements. Two types of mine waste were examined in this study: sintered waste rock and slag. The samples were collected from the Elizabeth and Ely mines in the Vermont copper belt (Besshi-type massive sulfide deposits), from the Copper Basin mining district near Ducktown, Tennessee (Besshi-type massive sulfide deposits), and from the Clayton silver mine in the Bayhorse mining district, Idaho (polymetallic vein and replacement deposits). The data in this report are presented as a compilation with minimal interpretation or discussion. A detailed discussion and interpretation of the slag data are presented in a companion paper. Data collected from sintered waste rock and slag include: (1) bulk rock chemistry, (2) mineralogy, (3) and the distribution of trace elements among phases for the slag samples. In addition, the reactivity of the waste material under surficial conditions was assessed by examining secondary minerals formed on slag and by laboratory leaching tests using deionized water and a synthetic solution approximating precipitation in the eastern United States.

Dynamic Brazilian Test of Rock Under Intermediate Strain Rate: Pendulum Hammer-Driven SHPB Test and Numerical Simulation

NASA Astrophysics Data System (ADS)

Zhu, W. C.; Niu, L. L.; Li, S. H.; Xu, Z. H.

2015-09-01

The tensile strength of rock subjected to dynamic loading constitutes many engineering applications such as rock drilling and blasting. The dynamic Brazilian test of rock specimens was conducted with the split Hopkinson pressure bar (SHPB) driven by pendulum hammer, in order to determine the indirect tensile strength of rock under an intermediate strain rate ranging from 5.2 to 12.9 s-1, which is achieved when the incident bar is impacted by pendulum hammer with different velocities. The incident wave excited by pendulum hammer is triangular in shape, featuring a long rising time, and it is considered to be helpful for achieving a constant strain rate in the rock specimen. The dynamic indirect tensile strength of rock increases with strain rate. Then, the numerical simulator RFPA-Dynamics, a well-recognized software for simulating the rock failure under dynamic loading, is validated by reproducing the Brazilian test of rock when the incident stress wave retrieved at the incident bar is input as the boundary condition, and then it is employed to study the Brazilian test of rock under the higher strain rate. Based on the numerical simulation, the strain-rate dependency of tensile strength and failure pattern of the Brazilian disc specimen under the intermediate strain rate are numerically simulated, and the associated failure mechanism is clarified. It is deemed that the material heterogeneity should be a reason for the strain-rate dependency of rock.

Facies analysis of Late Proterozoic through Lower Cambrian rocks of the Death Valley regional ground-water system and surrounding areas, Nevada and California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweetkind, D.S.; White, D.K.

Late Proterozoic through Lower Cambrian rocks in the southern Great Basin form a westward-thickening wedge of predominantly clastic deposits that record deposition on the early western shelf edge of western North America (Stewart and Poole, 1974; Poole and others, 1992). Regional analyses of geologic controls on ground-water flow in the southern Great Basin typically combined lithostratigraphic units into more general hydrogeologic units that have considerable lateral extent and distinct hydrologic properties. The Late Proterozoic through Lower Cambrian rocks have been treated as a single hydrogeologic unit, named the lower clastic aquitard (Winograd and Thordarson, 1975) or the quartzite confining unitmore » (Laczniak and others, 1996), that serves as the hydrologic basement to the flow system. Although accurate in a general sense, this classification ignores well-established facies relations within these rocks that might increase bedrock permeability and locally influence ground-water flow . This report presents a facies analysis of Late Proterozoic through Lower Cambrian rocks (hereafter called the study interval) in the Death Valley regional ground-water flow system - that portion of the southern Great Basin that includes Death Valley, the Nevada Test Site, and the potential high-level nuclear waste underground repository at Yucca Mountain (fig. 1). The region discussed in this report, hereafter called the study area, covers approximately 100,000 km2 (lat 35 degrees-38 degrees 15'N., long 115 degrees-118 degrees W.). The purpose of this analysis is to provide a general documentation of facies transitions within the Late Proterozoic through Lower Cambrian rocks in order to provide an estimate of material properties (via rock type, grain size, and bedding characteristics) for specific hydrogeologic units to be included in a regional ground-water flow model.« less

Geologic Map of Prescott National Forest and the Headwaters of the Verde River, Yavapai and Coconino Counties, Arizona

USGS Publications Warehouse

DeWitt, Ed; Langenheim, V.E.; Force, Eric; Vance, R.K.; Lindberg, P.A.; Driscoll, R.L.

2008-01-01

This 1:100,000-scale digital geologic map details the complex Early Proterozoic metavolcanic and plutonic basement of north-central Arizona; shows the mildly deformed cover of Paleozoic rocks; reveals where Laramide to mid-Tertiary plutonic rocks associated with base- and precious-metals deposits are exposed; subdivides the Tertiary volcanic rocks according to chemically named units; and maps the Pliocene to Miocene fill of major basins. Associated digital files include more than 1,300 geochemical analyses of all rock units; 1,750 logs of water wells deeper than 300 feet; and interpreted logs of 300 wells that define the depth to basement in major basins. Geophysically interpreted buried features include normal faults defining previous unknown basins, mid-Tertiary intrusive rocks, and half-grabens within shallow bains.

Heavy Metal Contamination and Salt Efflorescence Associated With Decorative Landscaping Rocks, Las Vegas, Nevada: The Need for Regulations

NASA Astrophysics Data System (ADS)

Mrozek, S. A.; Buck, B. J.; Brock, A. L.

2004-12-01

Las Vegas, Nevada is one of the fastest growing cities in the United States. Faced with water restrictions, decorative rock xeroscaping has become a very popular form of landscaping. Currently, there are no regulations controlling the geochemistry of the decorative rocks that can be used for these purposes. In this study, we examined three sites containing two different decorative rock products. The landscaping rocks, underlying soil, and surface salt crusts were analyzed to determine their mineralogy and chemistry. Methods of analysis include scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP), thin section analysis, and laser particle size analysis (LPSA). Preliminary results indicate the presence of halite (NaCl), bloedite (Na2Mg(SO4)2 4H2O), a hydrated magnesium sulfate, and possibly copper sulfate and copper chloride mineral phases in the surface salt crusts. Both copper minerals are regarded as hazardous substances by the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA); these agencies have established minimum exposure limits for human contact with these substances. Copper sulfate and copper chloride are not naturally occurring minerals in the soils of the Las Vegas Valley, and analyses indicate that their formation may be attributed to the mineralogy of the decorative landscaping rocks. Further testing is needed to characterize this potential health hazard; however the preliminary results of this study demonstrate the need for regulations controlling the geochemistry of decorative rocks used for urban landscaping.

Geological problems in radioactive waste isolation - A world wide review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witherspoon, P.A.

1991-06-01

The problem of isolating radioactive wastes from the biosphere presents specialists in the earth sciences with some of the most complicated problems they have ever encountered. This is especially true for high-level waste (HLW), which must be isolated in the underground and away from the biosphere for thousands of years. The most widely accepted method of doing this is to seal the radioactive materials in metal canisters that are enclosed by a protective sheath and placed underground in a repository that has been carefully constructed in an appropriate rock formation. Much new technology is being developed to solve the problemsmore » that have been raised, and there is a continuing need to publish the results of new developments for the benefit of all concerned. Table 1 presents a summary of the various formations under investigation according to the reports submitted for this world wide review. It can be seen that in those countries that are searching for repository sites, granitic and metamorphic rocks are the prevalent rock type under investigation. Six countries have developed underground research facilities that are currently in use. All of these investigations are in saturated systems below the water table, except the United States project, which is in the unsaturated zone of a fractured tuff.« less

Using Rock Music To Teach History.

ERIC Educational Resources Information Center

Hoffman, Paul Dennis

1985-01-01

A secondary history teacher describes how he uses rock and roll music to help students study and interpret modern American history. Besides being a lot of fun to teach, a rock unit makes students realize that even contemporary music has a place in history. (RM)

Families of miocene monterey crude oil, seep, and tarball samples, coastal California

USGS Publications Warehouse

Peters, K.E.; Hostettler, F.D.; Lorenson, T.D.; Rosenbauer, R.J.

2008-01-01

Biomarker and stable carbon isotope ratios were used to infer the age, lithology, organic matter input, and depositional environment of the source rocks for 388 samples of produced crude oil, seep oil, and tarballs to better assess their origins and distributions in coastal California. These samples were used to construct a chemometric (multivariate statistical) decision tree to classify 288 additional samples. The results identify three tribes of 13C-rich oil samples inferred to originate from thermally mature equivalents of the clayey-siliceous, carbonaceous marl and lower calcareous-siliceous members of the Monterey Formation at Naples Beach near Santa Barbara. An attempt to correlate these families to rock extracts from these members in the nearby COST (continental offshore stratigraphic test) (OCS-Cal 78-164) well failed, at least in part because the rocks are thermally immature. Geochemical similarities among the oil tribes and their widespread distribution support the prograding margin model or the banktop-slope-basin model instead of the ridge-and-basin model for the deposition of the Monterey Formation. Tribe 1 contains four oil families having geochemical traits of clay-rich marine shale source rock deposited under suboxic conditions with substantial higher plant input. Tribe 2 contains four oil families with traits intermediate between tribes 1 and 3, except for abundant 28,30-bisnorhopane, indicating suboxic to anoxic marine marl source rock with hemipelagic input. Tribe 3 contains five oil families with traits of distal marine carbonate source rock deposited under anoxic conditions with pelagic but little or no higher plant input. Tribes 1 and 2 occur mainly south of Point Conception in paleogeographic settings where deep burial of the Monterey source rock favored petroleum generation from all three members or their equivalents. In this area, oil from the clayey-siliceous and carbonaceous marl members (tribes 1 and 2) may overwhelm that from the lower calcareous-siliceous member (tribe 3) because the latter is thinner and less oil-prone than the overlying members. Tribe 3 occurs mainly north of Point Conception where shallow burial caused preferential generation from the underlying lower calcareous-siliceous member or another unit with similar characteristics. In a test of the decision tree, 10 tarball samples collected from beaches in Monterey and San Mateo counties in early 2007 were found to originate from natural seeps representing different organofacies of Monterey Formation source rock instead from one anthropogenic pollution event. The seeps apparently became more active because of increased storm activity. Copyright ?? 2008. The American Association of Petroleum Geologists. All rights reserved.

Total petroleum systems and geologic assessment of undiscovered oil and gas resources in the San Juan Basin Province, exclusive of Paleozoic rocks, New Mexico and Colorado

USGS Publications Warehouse

,

2013-01-01

In 2002, the U.S. Geological Survey (USGS) estimated undiscovered oil and gas resources that have the potential for additions to reserves in the San Juan Basin Province, New Mexico and Colorado. Paleozoic rocks were not appraised. The last oil and gas assessment for the province was in 1995. There are several important differences between the 1995 and 2002 assessments. The area assessed is smaller than that in the 1995 assessment. This assessment of undiscovered hydrocarbon resources in the San Juan Basin Province also used a slightly different approach in the assessment, and hence a number of the plays defined in the 1995 assessment are addressed differently in this report. After 1995, the USGS has applied a total petroleum system (TPS) concept to oil and gas basin assessments. The TPS approach incorporates knowledge of the source rocks, reservoir rocks, migration pathways, and time of generation and expulsion of hydrocarbons; thus the assessments are geologically based. Each TPS is subdivided into one or more assessment units, usually defined by a unique set of reservoir rocks, but which have in common the same source rock. Four TPSs and 14 assessment units were geologically evaluated, and for 13 units, the undiscovered oil and gas resources were quantitatively assessed.

Kinderhookian (Lower Mississippian) calcareous rocks of the Howard Pass quadrangle, western Brooks Range: A section in Geologic studies in Alaska by the U.S. Geological Survey, 1995

USGS Publications Warehouse

Dumoulin, Julie A.; Harris, Anita G.

1997-01-01

Calcareous rocks of Kinderhookian (early Early Mississippian) age are widely distributed across the Howard Pass quadrangle in the western Brooks Range. Most occur in the lower part of the Lisburne Group (herein called the Rough Mountain Creek unit) and the upper part of the Endicott Group (Kayak Shale) in two sequences (Key Creek and Aniuk River) of the Endicott Mountains allochthon. Kinderhookian strata are also found in the Kelly River allochthon (Utukok Formation?) and in sections of uncertain stratigraphic affinity and structural level spatially associated with mafic volcanic rocks.Predominant Kinderhookian lithologies in the Lisburne Group are skeletal supportstone (rich in pelmatozoans, bryozoans, and brachiopods) and lesser spiculite; skeletal supportstone and calcarenite are the chief calcareous rock types in the Kayak Shale. Conodont and brachiopod faunas indicate that all of the Rough Mountain Creek unit and much of the Kayak Shale in the study area are of late Kinderhookian age. Lithologic and paleontologic data suggest that Kinderhookian strata in the Howard Pass quadrangle were deposited largely in inner- and middle-shelf settings with normal marine salinity and locally high energy. Overall, calcareous beds in the Rough Mountain Creek unit accumulated in a wider range of environments, less subject to siliciclastic input, than did calcareous beds in the Kayak, and Kinderhookian beds of both units in the Key Creek sequence formed in less diverse, somewhat shallower environments than correlative rocks in the Aniuk River sequence. Lithofacies patterns and contact relations imply that decreased siliciclastic influx, perhaps accompanied by relative sea-level rise, initiated deposition of the Rough Mountain Creek unit; relative sea-level rise and concurrent circulatory restriction most likely ended its deposition.Kinderhookian calcareous rocks in the Howard Pass quadrangle have several implications for middle Paleozoic paleogeography of the western Brooks Range. First, sequences of the Endicott Mountains allochthon that contain the Rough Mountain Creek unit contrast sharply with other sequences included in this allochthon that contain thicker and younger Carboniferous platform carbonate successions. These differences in stratigraphic succession suggest significant shortening within the Endicott Mountains allochthon. Second, Kinderhookian calcareous rocks in the Howard Pass quadrangle may have been a secondary source for carbonate turbidites of the Rim Butte unit (Ipnavik allochthon).

76 FR 771 - Reorganization/Expansion of Foreign-Trade Zone 14 Under Alternative Site Framework; Little Rock, AR

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-06

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 1729] Reorganization/Expansion of Foreign-Trade Zone 14 Under Alternative Site Framework; Little Rock, AR Pursuant to its authority under... the Little Rock Customs and Border [[Page 772

Preliminary hydrogeologic evaluation of the Cincinnati Arch region for underground high-level radioactive waste disposal, Indiana, Kentucky , and Ohio

USGS Publications Warehouse

Lloyd, O.B.; Davis, R.W.

1989-01-01

Preliminary interpretation of available hydrogeologic data suggests that some areas underlying eastern Indiana, north-central Kentucky, and western Ohio might be worthy of further study regarding the disposal of high-level radioactive waste in Precambrian crystalline rocks buried beneath Paleozoic sedimentary rocks in the area. The data indicate that (1) largest areas of deepest potential burial and thickest sedimentary rock cover occur in eastern Indiana; (2) highest concentrations of dissolved solids in the basal sandstone aquifer, suggesting the most restricted circulation, are found in the southern part of the area near the Kentucky-Ohio State line and in southeastern Indiana; (3) largest areas of lowest porosity in the basal sandstone aquifer, low porosity taken as an indicator of the lowest groundwater flow velocity and contaminant migration, are found in northeastern Indiana and northwestern Ohio, central and southeastern Indiana, and central Kentucky; (4) the thickest confining units that directly overlie the basal sandstone aquifer are found in central Kentucky and eastern Indiana where their thickness exceeds 500 ft; (5) steeply dipping faults that form potential hydraulic connections between crystalline rock, the basal sandstone aquifer, and the freshwater circulation system occur on the boundaries of the study area mainly in central Kentucky and central Indiana. Collectively, these data indicate that the hydrogeology of the sedimentary rocks in the western part of the study area is more favorably suited than that in the remainder of the area for the application of the buried crystalline-rock concept. (USGS)

Assessment of Aeolis Palus stratigraphic relationships based on bench-forming strata in the Kylie and the Kimberley regions of Gale crater, Mars

NASA Astrophysics Data System (ADS)

Williams, Rebecca M. E.; Malin, Michael C.; Stack, Kathryn M.; Rubin, David M.

2018-07-01

The stratigraphic context of rock layers is a critical piece of information needed for accurate reconstruction of their geologic history. Although sedimentary rocks are widespread in Gale crater, efforts to deduce stratigraphic relationships of rocks were challenging early in the Mars Science Laboratory mission because vertical bedrock exposures were relatively rare along the first ∼3 km the rover traversed across Aeolis Palus. Potential insights into the three-dimensional configuration of rock layers were made once the rover passed Dingo Gap, especially in the informally-named Kylie and Kimberley regions. Here, the terrain exhibits low relief ( < 10 m) cliffs, some of which are continuous over lengths > 75 m. Curiosity Mastcam and Navcam images show that the cliffs are capped by resistant, bench-forming rock layers corresponding to two facies: a poorly sorted, weakly stratified pebble conglomerate, and a massive, dark-toned, vuggy sandstone. In places, the inclination of the topographic surface (northward ∼2° to 3°) is similar to the apparent dip of the underlying strata, suggesting the presence of dip slopes in an area inferred to be generally flat-lying, conformable rock units. Further, we assessed potential strata correlations via plane-fitting exercises and a regional comparison to other capping strata. We speculate that bench-forming strata in the study region could be part of a widespread package of draping strata (the Siccar Point group) that post-dates deposition and exhumation of the lower strata of Mount Sharp.

First Observation of Rock Motion on Racetrack Playa, Death Valley National Park—Role of a Persistent Pool, Sun, Zephyrs, Windowpane Ice, and Tugboats

NASA Astrophysics Data System (ADS)

Norris, R. D.; Norris, J. M.

2014-12-01

Trails in the mud-cracked surface of Racetrack Playa have been scored by hundreds of rocks up to 320 kg, but the mechanism of movement is debated. In Winter 2013-2014, we observed rocks in motion associated with a transient pool formed by winter precipitation. The pond was 7 cm deep on the southern edge of the playa, tapering to a mud flat to the north. Freezing during cold winter nights formed floating "windowpane" ice 3-5 mm thick. Rocks repeatedly moved on sunny days under light winds of 3-5 m/second, as the ice broke up near midday and was set into motion by wind stress on melt pools and the ice surface. Ice panels shoved rocks along the mud like a tugboat, sometimes forming moving imbricated ice piles upstream of the rocks and in other cases moving faster than the rocks and forming brash-filled leads downstream. GPS units mounted in experimental rocks recorded a creeping pace of 2-6 m/minute, a speed that made it difficult to observe trail formation visually. The 2013-2014 pond formed on November 20-24 and persisted through early February 2014. During this time rocks were observed moving at least five times, and studies of "stiz marks" formed by rocks at the ends of trail segments show that there were likely 3-5 additional move events. Observed travel times ranged from a few seconds to 16 minutes. In one event, two experimental rocks 153 m apart began moving simultaneously and traveled 64.1 and 65.6 m respectively, ultimately moving 157-162 m in subsequent events. Rock motion depends on the creation of winter pools sufficiently deep to allow the formation of floating ice and exposed to the light winds and sun needed for ice breakup. The combination of these events is extremely rare, leading to highly episodic trail formation. Our observations differ from previous hypotheses in that the rocks were moved by thinner ice, at slower speeds, and by lighter winds than predicted.

Engineering geology model of the Crater Lake outlet, Mt. Ruapehu, New Zealand, to inform rim breakout hazard

NASA Astrophysics Data System (ADS)

Cook, Stefan C. W.; Kennedy, Ben M.; Villeneuve, Marlène C.

2018-01-01

Mt. Ruapehu, in the central North Island of New Zealand, hosts a hot acidic Crater Lake over the active volcanic vent with a surface elevation of c. 2530 m.a.s.l. Volcanic activity and other montane processes have previously resulted in catastrophic releases of some or all of the c. 10 Mm3 of water retained in the lake, creating serious hazards downstream. A major lahar in March 2007 exposed a 10 m high face representative of the rock units impounding the lake, providing an opportunity to conduct both field and laboratory analysis to characterise the rock mass conditions at the outlet to assess the stability of the outlet area. This paper presents an engineering geology model of Crater Lake outlet. Our model shows three andesitic geological units at the outlet, each with different geological histories and physical and mechanical properties, which impact its stability. Geotechnical methods used to characterise the outlet include laboratory testing of the strength, stiffness, porosity and unit weight, and field-based rock mass characterisation using the geological strength index (GSI) and rock mass rating (RMR). Field observations, geomorphology mapping, historic and contemporary photographs, and laboratory results are combined to create cross sections that provide key information for establishing the engineering geology model. The units are recognised in what is informally termed the Crater Lake Formation: i) The upper surface layer is a c. 2 m thick sub-horizontal dark grey lava unit (Armoured Lava Ledge) with sub-horizontal cooling joints spaced at 0.2 m to 2.0 m intervals. The intact rock has a porosity range of 15-27%, density range of 1723-2101 kg/m3, GSI range of 45-75, and unconfined compressive strength (UCS) range of 19-48 MPa. ii) Below this, and outcropping down the majority of the outlet waterfall is a poorly sorted breccia unit composed of block and matrix material (Lava Breccia). The blocks range from 0.1 m to 0.8 m in diameter with an average porosity of 21%, a density of 1956 kg/m3 and strength of 85 MPa. The matrix has soil-like properties with an estimated UCS of 1.5 MPa. iii) At the base of the waterfall, the material sharply transitions into a light grey, slightly weathered unit (Lower Grey Member). This lower unit has an irregular surface expression with sub-vertical discontinuities. Porosity is 6%, density is 2569 kg/m3, the GSI range is 65-75, and the UCS is 98 MPa. The engineering geology model portrays the relationships between the units in three dimensions, highlights key structures and takes into consideration the material source, transportation and depositional processes. Historical outlet photographs suggest past eruptive and glacial activities are both significant factors controlling the deposition and erosion of material at the outlet. The Lower Grey Member appears to be a sound material for the outlet and water fall to be founded on. The upper aa Armoured Lava Ledge currently has moderate strength and GSI, and is resistive, providing protection for the underlying weaker block and matrix unit, however, continued incision by the outlet stream will eventually expose the weaker block and matrix material of the Lava Breccia. Once exposed, the Lava Breccia could rapidly erode or fail down to the Lower Grey Member and could potentially release 1 Mm3 of hot, acidic Crater Lake water. We recommend that erosion rates for the upper Armoured Lava Ledge be established to aid in preparation for eventual rim breakout.

Hydrogeologic framework, ground-water quality, and simulation of ground-water flow at the Fair Lawn Well Field Superfund site, Bergen County, New Jersey

USGS Publications Warehouse

Lewis-Brown, Jean C.; Rice, Donald E.; Rosman, Robert; Smith, Nicholas P.

2005-01-01

Production wells in the Westmoreland well field, Fair Lawn, Bergen County, New Jersey (the 'Fair Lawn well field Superfund site'), are contaminated with volatile organic compounds, particularly trichloroethylene, tetrachloroethylene, and 1,1,1-trichloroethane. In 1983, the U.S. Environmental Protection Agency (USEPA) placed the Westmoreland well field on its National Priority List of Superfund sites. In an effort to determine ground-water flow directions, contaminant-plume boundaries, and contributing areas to production wells in Fair Lawn, and to evaluate the effect of present pump-and-treat systems on flowpaths of contaminated ground water, the U.S. Geological Survey (USGS), in cooperation with the USEPA, developed a conceptual hydrogeologic framework and ground-water flow model of the study area. MODFLOW-2000, the USGS three-dimensional finite-difference model, was used to delineate contributing areas to production wells in Fair Lawn and to compute flowpaths of contaminated ground water from three potential contaminant sources to the Westmoreland well field. Straddle-packer tests were used to determine the hydrologic framework of, distribution of contaminants in, and hydrologic properties of water-bearing and confining units that make up the fractured-rock aquifer underlying the study area. The study area consists of about 15 square miles in and near Fair Lawn. The area is underlain by 6 to 100 feet of glacial deposits and alluvium that, in turn, are underlain by the Passaic Formation. In the study area, the Passaic Formation consists of brownish-red pebble conglomerate, medium- to coarse-grained feldspathic sandstone, and micaceous siltstone. The bedrock strata strike N. 9o E. and dip 6.5o to the northwest. The bedrock consists of alternating layers of densely fractured rocks and sparsely fractured rocks, forming a fractured-rock aquifer. Ground-water flow in the fractured-rock aquifer is anisotropic as a result of the interlayering of dipping water-bearing and confining units. Wells of similar depth aligned along the strike of the bedding intersect the same water-bearing units, but wells aligned along the dip of the bedding may intersect different water-bearing units. Consequently, wells aligned along strike are in greater hydraulic connection than wells aligned along dip. The Borough of Fair Lawn pumps approximately 770 million gallons per year from 13 production wells. Hydrographs from six observation wells ranging in depth from 162 to 505 feet in Fair Lawn show that water levels in much of the study area are affected by pumping. Straddle packers were used to isolate discrete intervals within six open-hole observation wells owned by the Fair Lawn Water Department. Transmissivity, water-quality, and static-water-level data were obtained from the isolated intervals. Measured transmissivity ranged from near 0 to 8,900 feet squared per day. The broad range in measured transmissivity is a result of the heterogeneity of the fractured-rock aquifer. Eight water-bearing units and eight confining units were identified in the study area on the basis of transmissivity. The water-bearing units range in thickness from 21 to 95 feet; the mean thickness is 50 feet. The confining units range in thickness from 22 to 248 feet; the mean thickness is 83 feet. Water-level and water-quality data indicate effective separation of water-bearing units by the confining units. Water-quality samples were collected from the six observation wells at 16 depth intervals isolated by the straddle packers in 2000 and 2001. Concentrations of volatile organic compounds generally were low in samples from four of the wells, but were higher in samples from a well in Fair Lawn Industrial Park and in a well in the Westmoreland well field. The digital ground-water flow model was used to simulate steady-state scenarios representing conditions in the study area in 1991 and 2000. These years were chosen because during the intervening period,

The Geology and Petrography of Yücebelen and Surrounding Area, Torul-Gümüşhane

NASA Astrophysics Data System (ADS)

Doǧacan, Özcan; Özpınar, Yahya

2013-04-01

The study area is located in the tectono-stratigraphic zone named "Eastern Pontide Zone" from the northeastern part of Turkey. Eastern Pontides were formed by the subduction of Tethys Ocean under the Eurasian plate, during the Early Cretaceous - Late Eocene. Eastern Pontide orogenic zone can be divided in two tectono-stratigraphic subgroups as the northern and southern zones. The study area is located very close to border of these two subgroups but located in northern zone. In this project, the first geological map of the study area at the scale 1:5000 was made. Subsequently, detailed geological maps at the scale 1:2000 were made for the areas rich in ores. In the study area, Upper Cretaceous volcanic rocks consisting of basalts and basaltic andesites take place at the bottom of the rock sequence. Basalts and basaltic andesites with hyaloophitic, vitrophiric and microporphyric texture comprise plagioclase +pyroxene +chlorite +calcite ±epidote ±chalcedony ±opaque minerals. They are overlain by concordant pyroclastic and dacitic-rhyodacitic rocks. Quarts + K-feldispar ±plagioclase? ±biotite ±chlorite ±calcite ±chalcedony minerals are determined as a result of microscope investigation on samples taken from these rocks. These rocks are overlain by sedimentary rocks intercalated with pyroclastic rocks. All those units mentioned above, were intruded by granitoids of supposed Upper Cretaceous-Eocene age. Granitoids that crop out in the area were classified in terms of Q-ANOR parameters as granodiorites (Adile Hamlet occurrence - investigated in detail), diorites (Tuzlak Hill occurrence- eastern-part of study area) and quartz monzodiorites (İstavroma Hill occurrence- northern part of study area). Adile Hamlet granodiorites comprise plagioclase +pyroxene +chlorite +calcite ±quarts ±epidote +opaque minerals. A sequence of quarts +orthoclase +plagioclase ±chlorite ±epidote ±calcite ±opaque minerals have been determined after investigation of the rock samples collected from Tuzlak Hill surrounding area. Also, petrographic investigation gave us plagioclase +hornblende ±biotite ±chlorite ±calcite ±quarts ±opaque minerals mineral sequence for the occurrences seen around İstavroma Hill. All of these units are intruded Late Eocene andesitic and dacitic dykes. It was determined that Cu-Pb-Zn mineralization depends on the quartz veins developed in the fracture zones of the granitoid body and its contacts with sedimentary rocks. These veins revealed a paragenesis consisting Cu-Pb-Zn minerals. Key words: Eastern Pontides, Gümüşhane-Torul, Granitoid, Cu-Pb-Zn mineralization, Gümüşhane-Torul

75 FR 27982 - Foreign-Trade Zone 14-Little Rock, Arkansas Application for Reorganization/Expansion Under...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-19

... Rock, Arkansas Application for Reorganization/Expansion Under Alternative Site Framework An application... current zone project includes the following sites: Site 1 (759.48 acres)--located at the Little Rock Port... of the Little Rock Port Industrial Park, on the McClellan-Kerr Arkansas River Navigation System...

Choices in Little Rock. A Facing History and Ourselves Teaching Guide

ERIC Educational Resources Information Center

Facing History and Ourselves, 2005

2005-01-01

This book presents a teaching unit that focuses on efforts to desegregate Central High School in Little Rock, Arkansas, in 1957--efforts that resulted in a crisis that historian Taylor Branch once described as "the most severe test of the Constitution since the Civil War." The unit explores civic choices--the decisions people make as…

Structure and metamorphism of the Franciscan Complex, Mt. Hamilton area, Northern California

USGS Publications Warehouse

Blake, M.C.; Wentworth, C.M.

1999-01-01

Truncation of metamorphic isograds and fold axes within coherent terranes of Franciscan metagraywacke by intervening zones of melange indicate that the melange is tectonic and formed after the subduction-related metamorphism and folding. These relations are expressed in two terranes of blueschist-facies rocks of the Franciscan Complex in the Mt. Hamilton area, northern California-the Jurassic Yolla Bolly terrane and the structurally underlying Cretaceous Burnt Hills terrane. Local preservation in both terranes of basal radiolarian chert and oceanic basalt beneath continent-derived metagraywacke and argillite demonstrates thrust repetition within the coherent terranes, although these relations are scarce near Mt. Hamilton. The metagraywackes range from albite-pumpellyite blueschists to those containing well-crystallized jadeitic pyroxene, and a jadeite-in isograd can be defined in parts of the area. Primary bedding defines locally coherent structural orientations and folds within the metagraywacke units. These units are crosscut by thin zones of tectonic melange containing blocks of high-grade blueschist, serpentinite, and other exotic rocks, and a broader, but otherwise identical melange zone marks the discordant boundary between the two terranes.

The south-central United States magnetic anomaly

NASA Technical Reports Server (NTRS)

Hinze, W. J.; Braile, L. W. (Principal Investigator); Starich, P. J.

1984-01-01

The South-Central United States Magnetic Anomaly is the most prominent positive feature in the MAGSAT scalar magnetic field over North America. The anomaly correlates with increased crustal thickness, above average crustal velocity, negative free air gravity anomalies and an extensive zone of Middle Proterozoic anorogenic felsic basement rocks. Spherical dipole source inversion of the MAGSAT scalar data and subsequent calculation of reduced to pole and derivative maps provide constraints for a crustal magnetic model which corresponds geographically to the extensive Middle Proterozoic felsic rocks trending northeasterly across the United States. These felsic rocks contain insufficient magnetization or volume to produce the anomaly, but are rather indicative of a crustal zone which was disturbed during a Middle Proterozoic thermal event which enriched magnetic material deep in the crust.

UHP metamorphism in Greece: Petrologic data from the Rhodope Mountains

NASA Astrophysics Data System (ADS)

Baziotis, I. P.; Mposkos, E.; Krohe, A.; Wawrzenitz, N. H.; Liu, Y.; Taylor, L. A.

2012-12-01

Metamorphic rocks contain invaluable information for understanding the orogenic mechanisms of a tectonic regime. It is now well recorded and recognized that subduction of oceanic lithosphere and collision of continental blocks can result in sinking of subducted rocks to deeper levels than normal (>100 km). Further, the discovery of coesite and diamond in apparently regionally metamorphosed rocks provoked issues, for returning these rocks to the surface relatively fast, thereby preserving the UHP conditions. These UHPM terrains have been identified in more than twenty provinces worldwide. In Greece, UHPM rocks occur in the Rhodope area, one of the major tectono-metamorphic units located in NE Greece. This region consists of different metamorphic complexes involved in the Alpine collisional history between the Eurasian and African plates (e.g., Krohe & Mposkos, 2002-Geol Soc London Spec Pub, 204, 151). In Rhodope, a Jurassic UHP metamorphism is confirmed in the uppermost Kimi and the underlying Sidironero complexes (Mposkos & Kostopoulos, 2001- EPSL, 192, 497; Perraki et al., 2004-5th ISEMG, T2-35, 2006- EPSL, 241, 672; Liati, 2005- Con Min Pet, 150, 608; Bauer et al., 2007- Lithos, 99, 207). UHP metamorphism is evidenced by the presence of octahedral microdiamond inclusions (3 to 10 μm) in protective garnets, within the metapelitic gneisses. Microdiamonds probably formed from a supercritical fluid under extreme P-T conditions. The latter is strengthened by the presence of composite inclusions consisting of CO2, calcite, and microdiamonds. Other UHP indicators include: 1) quartz rods and rutile needle exsolutions in metapelitic garnet, suggesting a former titaniferous super-silicic (majoritic) garnet formed at P >4GPa; 2) oriented quartz lamellae in eclogitic clinopyroxene having been exsolved from a former super-silicic UHP precursor; and 3) coesite pseudomorphs in garnet, where radial cracks around multi-crystalline-quartz aggregates are indicative of the former coesite existence (e.g., Mposkos & Krohe, 2006- Can J Earth Sci, 43, 1755). Jurassic UHP rocks are overprinted by late Jurassic/early Cretaceous HP granulite facies metamorphism (P >1.5GPa; T~900 oC). In the Eastern and Western Rhodope, exhumation of these rocks occurred along different P-T paths. In the eastern Rhodope (Kimi Complex), UHP rocks re-equilibrated under relatively static annealing conditions and emerged at the surface in the Eocene. In the western Rhodope (Sidironero Complex), these rocks have been subjected to an overprinting Eocene MP to HP metamorphism, followed by exhumation along a major shear zone at about 40 Ma. In either case, a long-lasting post-UHP metamorphic history retrograded and almost completely destroyed the UHP minerals, thereby limiting the UHP record mainly to textural evidences and scarce UHP polymorphs. Consequently, some of the micro-diamonds have been partially or fully graphitized during this extensive exhumation period.

Geochemical Relationships between Middle- to Upper-Crustal Exposures of the Alisitos Oceanic Arc (Baja California, Mexico): An Outstanding Field Analog to Active Extensional Oceanic Arcs

NASA Astrophysics Data System (ADS)

Morris, R.; DeBari, S. M.; Busby, C.; Medynski, S.

2016-12-01

The southern volcano-bounded basin of the Rosario segment of the Cretaceous Alisitos oceanic arc provides outstanding 3-D exposures of an extensional arc, where crustal generation processes are recorded in the upper-crustal volcanic units and underlying middle-crustal plutonic rocks. Geochemical linkages between exposed crustal levels provide an analog for extensional arc systems such as the Izu-Bonin-Mariana (IBM) Arc. Upper-crustal units comprise a 3-5 km thick volcanic-volcaniclastic stratigraphy with hypabyssal intrusions. Deep-seated plutonic rocks intrude these units over a transition of <500m, where rafted volcanic blocks and evidence of magma mingling are exposed. Thermobarometry suggests <6 km emplacement depths. Compositional ranges (basalt to rhyolite) and mineral assemblages are similar in both middle-crustal and upper-crustal units, with striking compositional overlap. The most mafic compositions occur in upper-crustal hypabyssal units, and as amphibole cumulates in the plutonic rocks ( 51% SiO2). The most felsic compositions occur in welded ignimbrites and a tonalite pluton ( 71% SiO2). All units are low K with flat REE patterns, and show LILE enrichment and HFSE depletion. Trace element ratios show limited variation throughout the crustal section. Zr/Y and Nb/Y ratios are similar to the Izu active ( 3 Ma to present) zone of extension immediately behind the arc front, suggesting comparable mantle melt % during extension. Th/Zr ratios are more enriched in Alisitos compared to Izu, suggesting greater subducted sediment input. The Alisitos crustal section shows a limited range in ɛNd (5.7-7.1), but a wider range in 87Sr/86Sr (0.7035-0.7055) and 206Pb/204Pb (18.12-19.12); the latter is likely alteration effects. Arc magmas were derived from a subduction-modified MORB mantle source, less depleted than Izu arc front and less enriched than the rear arc, but is a good match with the zone of extension that lies between. Differentiation occurred in a closed system (i.e., fractional crystallization/self-melting with back mixing), producing the entire crustal section in <3 Ma.

Pressurized Slot Testing to Determine Thermo-Mechanical Properties of Lithophysal Tuff at Yucca Mountain Nevada.

DOE Office of Scientific and Technical Information (OSTI.GOV)

George, James T.; Sobolik, Steven R.; Lee, Moo Y.

The study described in this report involves heated and unheated pressurized slot testing to determine thermo-mechanical properties of the Tptpll (Tertiary, Paintbrush, Topopah Spring Tuff Formation, crystal poor, lower lithophysal) and Tptpul (upper lithophysal) lithostratigraphic units at Yucca Mountain, Nevada. A large volume fraction of the proposed repository at Yucca Mountain may reside in the Tptpll lithostratigraphic unit. This unit is characterized by voids, or lithophysae, which range in size from centimeters to meters, making a field program an effective method of measuring bulk thermal-mechanical rock properties (thermal expansion, rock mass modulus, compressive strength, time-dependent deformation) over a range ofmore » temperature and rock conditions. The field tests outlined in this report provide data for the determination of thermo-mechanical properties of this unit. Rock-mass response data collected during this field test will reduce the uncertainty in key thermal-mechanical modeling parameters (rock-mass modulus, strength and thermal expansion) for the Tptpll lithostratigraphic unit, and provide a basis for understanding thermal-mechanical behavior of this unit. The measurements will be used to evaluate numerical models of the thermal-mechanical response of the repository. These numerical models are then used to predict pre- and post-closure repository response. ACKNOWLEDGEMENTS The authors would like to thank David Bronowski, Ronnie Taylor, Ray E. Finley, Cliff Howard, Michael Schuhen (all SNL) and Fred Homuth (LANL) for their work in the planning and implementation of the tests described in this report. This is a reprint of SAND2004-2703, which was originally printed in July 2004. At that time, it was printed for a restricted audience. It has now been approved for unlimited release.« less

Fine characterization rock thermal damage by acoustic emission technique

NASA Astrophysics Data System (ADS)

Kong, Biao; Li, Zenghua; Wang, Enyuan

2018-02-01

This paper examines the differences in the thermal mechanical properties and acoustic emission (AE) characteristics during the deformation and fracture of rock under the action of continuous heating and after high-temperature treatment. Using AE 3D positioning technology, the development and evolution of the internal thermal cracks and the time domain of AE signals in rock were analyzed. High-temperature treatment causes thermal damage to rock. Under the action of continuous heating, the phase characteristics of AE time series correspond to the five stages of rock thermal deformation and fracture, respectively: the micro-defect development stage, the threshold interval of rock micro-cracks, the crack initiation stage, the crack propagation stage, and the crack multistage propagation evolution. When the initial crack propagates, the crack initiation of the rock causes the AE signal to produce a sudden mutation change. Mechanical fraction characteristics during rock uniaxial compression after temperature treatment indicated that the decrease rate of the rock compressive strength, wave velocity, and elastic modulus are relatively large during uniaxial compression tests after high-temperature treatment. During the deformation and fracture of rock under loading, there is faster growth of AE counts and AE events, indicating an increase in the speed of rock deformation and fracture under loading. AE counts show obvious changes during the latter loading stages, whereas AE events show obvious changes during the loading process. The results obtained are valuable for rock thermal stability detection and evaluation in actual underground engineering.

Dependence of frictional strength on compositional variations of Hayward fault rock gouges

USGS Publications Warehouse

Morrow, Carolyn A.; Moore, Diane E.; Lockner, David A.

2010-01-01

The northern termination of the locked portion of the Hayward Fault near Berkeley, California, is found to coincide with the transition from strong Franciscan metagraywacke to melange on the western side of the fault. Both of these units are juxtaposed with various serpentinite, gabbro and graywacke units to the east, suggesting that the gouges formed within the Hayward Fault zone may vary widely due to the mixing of adjacent rock units and that the mechanical behavior of the fault would be best modeled by determining the frictional properties of mixtures of the principal rock types. To this end, room temperature, water-saturated, triaxial shearing tests were conducted on binary and ternary mixtures of fine-grained gouges prepared from serpentinite and gabbro from the Coast Range Ophiolite, a Great Valley Sequence graywacke, and three different Franciscan Complex metasedimentary rocks. Friction coefficients ranged from 0.36 for the serpentinite to 0.84 for the gabbro, with four of the rock types having coefficients of friction ranging from 0.67-0.84. The friction coefficients of the mixtures can be predicted reliably by a simple weighted average of the end-member dry-weight percentages and strengths for all samples except those containing serpentinite. For the serpentinite mixtures, a linear trend between end-member values slightly overestimates the coefficients of friction in the midcomposition ranges. The range in strength for these rock admixtures suggests that both theoretical and numerical modeling of the fault should attempt to account for variations in rock and gouge properties.

30 CFR 33.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES General Provisions... apparatus for collecting the dust that results from drilling in rock in coal mines, and is independent of the drilling equipment. (f) Combination unit means a rock-drilling device with an integral dust...

30 CFR 33.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES General Provisions... apparatus for collecting the dust that results from drilling in rock in coal mines, and is independent of the drilling equipment. (f) Combination unit means a rock-drilling device with an integral dust...

30 CFR 33.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES General Provisions... apparatus for collecting the dust that results from drilling in rock in coal mines, and is independent of the drilling equipment. (f) Combination unit means a rock-drilling device with an integral dust...

30 CFR 33.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES General Provisions... apparatus for collecting the dust that results from drilling in rock in coal mines, and is independent of the drilling equipment. (f) Combination unit means a rock-drilling device with an integral dust...

30 CFR 33.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MINING PRODUCTS DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES General Provisions... apparatus for collecting the dust that results from drilling in rock in coal mines, and is independent of the drilling equipment. (f) Combination unit means a rock-drilling device with an integral dust...

Chapter 2: 2003 Geologic Assessment of Undiscovered Conventional Oil and Gas Resources in the Upper Cretaceous Navarro and Taylor Groups, Western Gulf Province, Texas

USGS Publications Warehouse

Condon, S.M.; Dyman, T.S.

2006-01-01

The Upper Cretaceous Navarro and Taylor Groups in the western part of the Western Gulf Province were assessed for undiscovered oil and gas resources in 2003. The area is part of the Smackover-Austin-Eagle Ford Composite Total Petroleum System. The rocks consist of, from youngest to oldest, the Escondido and Olmos Formations of the Navarro Group and the San Miguel Formation and the Anacacho Limestone of the Taylor Group (as well as the undivided Navarro Group and Taylor Group). Some units of the underlying Austin Group, including the 'Dale Limestone' (a term of local usage that describes a subsurface unit), were also part of the assessment in some areas. Within the total petroleum system, the primary source rocks comprise laminated carbonate mudstones and marine shales of the Upper Jurassic Smackover Formation, mixed carbonate and bioclastic deposits of the Upper Cretaceous Eagle Ford Group, and shelf carbonates of the Upper Cretaceous Austin Group. Possible secondary source rocks comprise the Upper Jurassic Bossier Shale and overlying shales within the Upper Jurassic to Lower Cretaceous Cotton Valley Group, Lower Cretaceous marine rocks, and the Upper Cretaceous Taylor Group. Oil and gas were generated in the total petroleum system at different times because of variations in depth of burial, geothermal gradient, lithology, and organic-matter composition. A burial-history reconstruction, based on data from one well in the eastern part of the study area (Jasper County, Tex.), indicated that (1) the Smackover generated oil from about 117 to 103 million years ago (Ma) and generated gas from about 52 to 41 Ma and (2) the Austin and Eagle Ford Groups generated oil from about 42 to 28 Ma and generated gas from about 14 Ma to the present. From the source rocks, oil and gas migrated upsection and updip along a pervasive system of faults and fractures as well as along bedding planes and within sandstone units. Types of traps include stratigraphic pinchouts, folds, faulted folds, and combinations of these. Seals consist of interbedded shales and mudstones and diagenetic cementation. The area assessed is divided into five assessment units (AUs): (1) Travis Volcanic Mounds Oil (AU 50470201), (2) Uvalde Volcanic Mounds Gas and Oil (AU 50470202), (3) Navarro-Taylor Updip Oil and Gas (AU 50470203), (4) Navarro-Taylor Downdip Gas and Oil (AU 50470204), and (5) Navarro-Taylor Slope-Basin Gas (AU 50470205). Total estimated mean undiscovered conventional resources in the five assessment units combined are 33.22 million barrels of oil, 1,682.80 billion cubic feet of natural gas, and 34.26 million barrels of natural gas liquids.

Profiles of Reservoir Properties of Oil-Bearing Plays for Selected Petroleum Provinces in the United States

USGS Publications Warehouse

Freeman, P.A.; Attanasi, E.D.

2015-11-05

Each province profile figure consists of five strip charts and a boxplot. The five strip charts display for individual plays the following reservoir-fluid and reservoir properties: A, oil density (American Petroleum Institute [API] gravity in degrees); B, computed pseudo-Dykstra-Parsons coefficient; C, reservoir porosity (in percent); D, reservoir permeability (in millidarcies); and E, estimates of the original oil in place (OOIP) per unit volume of reservoir rock (in barrels per acre-foot). The OOIP per unit volume of reservoir rock is an indicator of the relative richness of the oil reservoir and is derived from estimates in the CRD of OOIP, reservoir acreage, and net pay. The net pay is the interval of productive reservoir rock. The same data for OOIP per unit volume are graphed as a strip chart (E) and a boxplot (F).

Hydraulic-property estimates for use with a transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California

USGS Publications Warehouse

Belcher, Wayne R.; Elliott, Peggy E.; Geldon, Arthur L.

2001-01-01

The Death Valley regional ground-water flow system encompasses an area of about 43,500 square kilometers in southeastern California and southern Nevada, between latitudes 35? and 38?15' north and longitudes 115? and 117?45' west. The study area is underlain by Quaternary to Tertiary basin-fill sediments and mafic-lava flows; Tertiary volcanic, volcaniclastic, and sedimentary rocks; Tertiary to Jurassic granitic rocks; Triassic to Middle Proterozoic carbonate and clastic sedimentary rocks; and Early Proterozoic igneous and metamorphic rocks. The rock assemblage in the Death Valley region is extensively faulted as a result of several episodes of tectonic activity. This study is comprised of published and unpublished estimates of transmissivity, hydraulic conductivity, storage coefficient, and anisotropy ratios for hydrogeologic units within the Death Valley region study area. Hydrogeologic units previously proposed for the Death Valley regional transient ground-water flow model were recognized for the purpose of studying the distribution of hydraulic properties. Analyses of regression and covariance were used to assess if a relation existed between hydraulic conductivity and depth for most hydrogeologic units. Those analyses showed a weak, quantitatively indeterminate, relation between hydraulic conductivity and depth.

"Normal" to adakite-like arc magmatism associated with the El Abra porphyry copper deposit, Central Andes, Northern Chile

NASA Astrophysics Data System (ADS)

Rabbia, Osvaldo M.; Correa, Karen J.; Hernández, Laura B.; Ulrich, Thomas

2017-03-01

The El Abra porphyry copper deposit belongs to the Late Eocene—Early Oligocene metallogenic belt of northern Chile, which host several world-class porphyry copper deposits. Our previous geochronological work done on this deposit provides the temporal framework for petrological data interpretation. The magmatic history of the El Abra deposit lasts for 8.6 Ma and can be divided into two stages. An early period, from about 45 to 38.7 Ma, dominated by diorites and quartz monzodiorites with "normal" (non-adakite) arc geochemistry and a late period, with rocks younger than 38.7 Ma that developed adakite-like geochemistry, where equigranular granodiorites are the volumetrically dominant rock type (e.g., Clara granodiorite 38 Ma). These granodiorites are then intruded by leucocratic porphyry dikes and aplites. Most copper mineralization is associated with multiple intrusions of these younger porphyritic rocks, described as the El Abra porphyry unit, and emplaced over a 1.4 Ma period, from 37.5 to 36.1 Ma. The adakite-like geochemistry of the younger rock units (<38.7 Ma) is attested by a significant depletion in REE contents, particularly MREE and HREE (concave MREE distribution patterns), high La/Yb and Sr/Y ratios, and Na2O and Al2O3 contents, along with the absence of the Eu anomaly in normalized REE distribution patterns. The evolution of this large, long-lived magmatic system from "normal" to adakite-like arc magmatism is discussed in a tectonic context of crust overthickening due to a major orogenic episode (Incaic compressive phase). This tectonic setting may have promoted higher pressure conditions at the lower crust "hot zone" and increased the crustal residence time of derivative melts favoring extensive differentiation leading to water-rich (and oxidized?) felsic melts, where amphibole fractionation played an important role. Strontium, Nd, and Pb isotope data suggest a common mantle source for both the non-adakite and adakite-like rocks. This implies that these two groups of rocks from the El Abra porphyry copper deposit may have largely resulted from the different crustal conditions under which they have evolved.

A Reconsideration of the Extension Strain Criterion for Fracture and Failure of Rock

NASA Astrophysics Data System (ADS)

Wesseloo, J.; Stacey, T. R.

2016-12-01

The complex behaviours of rocks and rock masses have presented paradoxes to the rock engineer, including the fracturing of seemingly strong rock under low stress conditions, which often occurs near excavation boundaries. The extension strain criterion was presented as a fracture initiation criterion under these conditions (Stacey in Int J Rock Mech Min Sci 18:469-474, 1981). This criterion has been used successfully by some and criticised by others. In this paper, we review the literature on the extension strain criterion and present a case for the correct interpretation of the criterion and the conditions suitable for its use. We argue that the extension strain criterion can also be used to provide an indication of damage level under conditions of relatively low confining stress. We also present an augmentation of the criterion, the ultimate extension strain, which is applicable under extensional loading conditions when σ 2 is similar in magnitude to σ 1.

The geology and mechanics of formation of the Fort Rock Dome, Yavapai County, Arizona

USGS Publications Warehouse

Fuis, Gary S.

1996-01-01

The Fort Rock Dome, a craterlike structure in northern Arizona, is the erosional product of a circular domal uplift associated with a Precambrian shear zone exposed within the crater and with Tertiary volcanism. A section of Precambrian to Quaternary rocks is described, and two Tertiary units, the Crater Pasture Formation and the Fort Rock Creek Rhyodacite, are named. A mathematical model of the doming process is developed that is consistent with the history of the Fort Rock Dome.

Feature level fusion for enhanced geological mapping of ophiolile complex using ASTER and Landsat TM data

NASA Astrophysics Data System (ADS)

Pournamdari, M.; Hashim, M.

2014-02-01

Chromite ore deposit occurrence is related to ophiolite complexes as a part of the oceanic crust and provides a good opportunity for lithological mapping using remote sensing data. The main contribution of this paper is a novel approaches to discriminate different rock units associated with ophiolite complex using the Feature Level Fusion technique on ASTER and Landsat TM satellite data at regional scale. In addition this study has applied spectral transform approaches, consisting of Spectral Angle Mapper (SAM) to distinguish the concentration of high-potential areas of chromite and also for determining the boundary between different rock units. Results indicated both approaches show superior outputs compared to other methods and can produce a geological map for ophiolite complex rock units in the arid and the semi-arid region. The novel technique including feature level fusion and Spectral Angle Mapper (SAM) discriminated ophiolitic rock units and produced detailed geological maps of the study area. As a case study, Sikhoran ophiolite complex located in SE, Iran has been selected for image processing techniques. In conclusion, a suitable approach for lithological mapping of ophiolite complexes is demonstrated, this technique contributes meaningfully towards economic geology in terms of identifying new prospects.

Contact Zone: Missoula

NASA Image and Video Library

2015-07-23

A rock outcrop dubbed "Missoula," near Marias Pass on Mars, is seen in this image mosaic taken by the Mars Hand Lens Imager on NASA's Curiosity rover. Pale mudstone (bottom of outcrop) meets coarser sandstone (top) in this geological contact zone, which has piqued the interest of Mars scientists. White mineral veins that fill fractures in the lower rock unit abruptly end when they meet the upper rock unit. Such clues help scientists understand the possible timing of geological events. First, the fine sediment that now forms the lower unit would have hardened into rock. It then would have fractured, and groundwater would have deposited calcium sulfate minerals into the fractures. Next, the coarser sediment that forms the upper unit would have been deposited. The area pictured is about 16 inches (40 centimeters) across. The image was taken on the 1,031st Martian day, or sol, of the mission (July 1, 2015). MAHLI was built by Malin Space Science Systems, San Diego. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Science Laboratory Project for the NASA Science Mission Directorate, Washington. JPL designed and built the project's Curiosity rover. http://photojournal.jpl.nasa.gov/catalog/PIA19829

Coseismic landslides reveal near-surface rock strength in a high-relief tectonically active setting

USGS Publications Warehouse

Gallen, Sean F.; Clark, Marin K.; Godt, Jonathan W.

2014-01-01

We present quantitative estimates of near-surface rock strength relevant to landscape evolution and landslide hazard assessment for 15 geologic map units of the Longmen Shan, China. Strength estimates are derived from a novel method that inverts earthquake peak ground acceleration models and coseismic landslide inventories to obtain material proper- ties and landslide thickness. Aggregate rock strength is determined by prescribing a friction angle of 30° and solving for effective cohesion. Effective cohesion ranges are from 70 kPa to 107 kPa for 15 geologic map units, and are approximately an order of magnitude less than typical laboratory measurements, probably because laboratory tests on hand-sized specimens do not incorporate the effects of heterogeneity and fracturing that likely control near-surface strength at the hillslope scale. We find that strength among the geologic map units studied varies by less than a factor of two. However, increased weakening of units with proximity to the range front, where precipitation and active fault density are the greatest, suggests that cli- matic and tectonic factors overwhelm lithologic differences in rock strength in this high-relief tectonically active setting.

Preliminary hydrogeologic investigation of the Maxey Flats radioactive waste burial site, Fleming County, Kentucky

USGS Publications Warehouse

Zehner, Harold H.

1979-01-01

Burial trenches at the Maxey Flats radioactive waste burial site , Fleming County, Ky., cover an area of about 0.03 square mile, and are located on a plateau, about 300 to 400 feet above surrounding valleys. Although surface-water characteristics are known, little information is available regarding the ground-water hydrology of the Maxey Flats area. If transport of radionuclides from the burial site were to occur, water would probably be the principal mechanism of transport by natural means. Most base flow in streams around the burial site is from valley alluvium, and from the mantle of regolith, colluvium, and soil partially covering adjacent hills. Very little base flow is due to ground-water flow from bedrock. Most water in springs is from the mantle, rather than from bedrock. Rock units underlying the Maxey Flats area are, in descending order, the Nancy and Farmers Members of the Borden Formation, Sunbury, Bedford, and Ohio Shales, and upper part of the Crab Orchard Formation. These units are mostly shales, except for the Farmers Member, which is mostly sandstone. Total thickness of the rocks is about 320 feet. All radioactive wastes are buried in the Nancy Member. Most ground-water movement in bedrock probably occurs in fractures. The ground-water system at Maxey Flats is probably unconfined, and recharge occurs by (a) infiltration of rainfall into the mantle, and (b) vertical, unsaturated flow from the saturated regolith on hilltops to saturated zones in the Farmers Member and Ohio Shale. Data are insufficient to determine if saturated zones exist in other rock units. The upper part of the Crab Orchard Formation is probably a hydrologic boundary, with little ground-water flow through the formation. (USGS)

Isotopic variation in the Tuolumne Intrusive Suite, central Sierra Nevada, California

USGS Publications Warehouse

Kistler, R.W.; Chappell, B.W.; Peck, D.L.; Bateman, P.C.

1986-01-01

Granitoid rocks of the compositionally zoned Late Cretaceous Toulumne Intrusive Suite in the central Sierra Nevada, California, have initial87Sr/86Sr values (Sri) and143Nd/144Nd values (Ndi) that vary from 0.7057 to 0.7067 and from 0.51239 to 0.51211 respectively. The observed variation of both Sri and Ndi and of chemical composition in rocks of the suite cannot be due to crystal fractionation of magma solely under closed system conditons. The largest variation in chemistry, Ndi, and Sri is present in the outer-most equigranular units of the Tuolumne Intrusive Suite. Sri varies positively with SiO2, Na2O, K2O, and Rb concentrations, and negatively with Ndi, Al2O3, Fe2O3, MgO, FeO, CaO, MnO, P2O5, TiO2, and Sr concentrations. This covariation of Sri, Ndi and chemistry can be modeled by a process of simple mixing of basaltic and granitic magmas having weight percent SiO2 of 48.0 and 73.3 respectively. Isotopic characteristic of the mafic magma are Sri=0.7047, Ndi=0.51269 and ??18O=6.0, and of the felsic magma are Sri=0.7068, Ndi=0.51212 and ??18O=8.9. The rocks sampled contain from 50 to 80% of the felsic component. An aplite in the outer equigranular unit of the Tuolumne Intrusive Suite apparently was derived by fractional crystallization of plagioclase and hornblende from magma with granudiorite composition that was a product of mixing of the magmas described above. Siliceous magmas derived from the lower crust, having a maximum of 15 percent mantle-derived mafic component, are represented by the inner prophyritic units of the Tuolumne Intrusive Suite. ?? 1986 Springer-Verlag.

Incremental growth of an upper crustal, A-type pluton, Argentina: Evidence of a re-used magma pathway

NASA Astrophysics Data System (ADS)

Alasino, Pablo H.; Larrovere, Mariano A.; Rocher, Sebastián; Dahlquist, Juan A.; Basei, Miguel A. S.; Memeti, Valbone; Paterson, Scott; Galindo, Carmen; Macchioli Grande, Marcos; da Costa Campos Neto, Mario

2017-07-01

Carboniferous igneous activity in the Sierra de Velasco (NW Argentina) led to the emplacement of several magmas bodies at shallow levels (< 2 kbar). One of these, the San Blas intrusive complex formed over millions of years (≤ 2-3 m.y.) through three periods of magma additions that are characterized by variations in magma sources and emplacement style. The main units, mostly felsic granitoids, have U-Pb zircon crystallization ages within the error range. From older to younger (based on cross-cutting relationships) intrusive units are: (1) the Asha unit (340 ± 7 Ma): a tabular to funnel-shaped intrusion emplaced during a regional strain field dominated by WSW-ENE shortening with contacts discordant to regional host-rock structures; (2) the San Blas unit (344 ± 2 Ma): an approximate cylindrical-shaped intrusion formed by multiple batches of magmas, with a roughly concentric fabric pattern and displacement of the host rock by ductile flow of about 35% of shortening; and (3) the Hualco unit (346 ± 6 Ma): a small body with a possible mushroom geometry and contacts concordant to regional host-rock structures. The magma pulses making up these units define two groups of A-type granitoids. The first group includes the peraluminous granitic rocks of the Asha unit generated mostly by crustal sources (εNdt = - 5.8 and εHft in zircon = - 2.9 to - 4.5). The second group comprises the metaluminous to peraluminous granitic rocks of the youngest units (San Blas and Hualco), which were formed by a heterogeneous mixture between mantle and crustal sources (εNdt = + 0.6 to - 4.8 and εHft in zircon = + 3 to - 6). Our results provide a comprehensive view of the evolution of an intrusive complex formed from multiple non-consanguineous magma intrusions that utilized the same magmatic plumbing system during downward transfer of host materials. As the plutonic system matures, the ascent of magmas is governed by the visco-elastic flow of host rock that for younger batches include older hot magma mush. The latter results in ductile downward flow of older, during rise of younger magma. Such complexes may reflect the plutonic portion of volcanic centers where chemically distinct magmas are erupted.

Geologic map of the South Sierra Wilderness and South Sierra Roadless area, southern Sierra Nevada, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diggles, M.F.; Carter, K.E.

1993-04-01

The study area is underlain predominantly by granitoid rocks of the Sierra Nevada batholith. Metamorphic rocks are present in roof pendants mainly in the southwest corner of the study area and consist of quartz-biotite schist, phyllite, quartzite, marble, calc-silicate hornfels, and meta-dacite. Among the seven Triassic and (or) Jurassic plutons are three newly described units that consist of the gabbro of Deer Mountain, the tonalite of Falls Creek, and the quartz diorite of Round Mountain. The map shows one newly described unit that intrudes Triassic rocks: the granodiorite of Monache Creek which is a leucocratic, medium-grained, equi-granular, locally porphyritic biotitemore » hornblende granodiorite. Among the seven Cretaceous plutons are two newly described units. The Cretaceous rocks are generally medium- to coarse-grained, potassium-feldspar porphyritic granite with biotite and minor hornblende; it includes abundant pods of alaskite. The granite of Haiwee Creek is similar but only locally potassium-feldspar porphyritic and with only minor hornblende. Major-element data plotted on Harker diagrams show the older rocks to be higher in iron and magnesium and lower in silica than the younger rocks. There are abundant local pods of alaskite throughout the study area that consist of medium- to coarse-grained, leucocratic granite, alkali-feldspar granite and associated aplite and pegmatite bodies occurring as small pods and highly leucocratic border phases of nearby plutons. Tertiary and Quaternary volcanic rock include the rhyolite of Monache Mountain and Quaternary surficial deposits: fan, stream-channel, colluvium, talus, meadow-filling, rock-glacier, and glacial-moraine deposits. Important structures include the Sierran front fault and a possible extensional feature along which Bacon (1978) suggests Monache Mountain erupted.« less

Late Cretaceous transition from subduction to collision along the Bangong-Nujiang Tethys: New volcanic constraints from central Tibet

NASA Astrophysics Data System (ADS)

Liu, De-Liang; Shi, Ren-Deng; Ding, Lin; Zou, Hai-Bo

2018-01-01

This study deals with arc-type and subsequent bimodal volcanic rocks interbedded with (late) Cretaceous sedimentary formations near Gaize, central Tibet that shed new light on the Tethyan evolution along the Bangong-Nujiang suture. Unit I consists of trachyandesites interbedded with fine-grained sandstone, slate, and limestone. Zircon dating on a trachyandesite sample yields a 206Pb/238U age of 99 ± 1 Ma. The trachyandesites are characterized by strong enrichment in LILE but depletion in HFSE, low zircon saturation temperatures (TZr = 642-727 °C), and high oxygen fugacity (Δ FMQ = - 0.67-0.73), indicating their arc affinities. Unit II comprises a bimodal basalt-rhyolite suite interbedded with coarse-grained sandstone and conglomerate. Zircon dating on two rhyolitic samples yield 206Pb/238U ages of 97.1-87.0 Ma. In contrast with Unit I trachyandesites, Unit II basalts and rhyolites exhibit OIB-like trace element patterns, high temperatures (T = 1298-1379 °C for basalts, TZr = 855-930 °C for rhyolites), and low oxygen fugacity (Δ FMQ = - 3.37 - 0.43), suggesting that Unit II bimodal volcanic rocks probably formed in an extensional setting. The Sr-Nd isotopes of both Unit I (87Sr/86Sri = 0.7052-0.7074, εNd(t) = - 2.21-1.02) and Unit II (87Sr/86Sri = 0.7057-0.7098, εNd(t) = - 3.22-0.88) rocks are similar to mantle-wedge-derived volcanic rocks within the southern Qiangtang block. The parental magma of Unit I trachyandesites was formed by fluid induced melting of the mantle wedge above the subducted Bangong-Nujiang Tethyan slab, and contaminated by crustal materials during MASH process within a deep crustal hot zone; and Unit II bimodal volcanic rocks were derived by melting of upwelling asthenosphere and a mildly metasomatized mantle wedge during the Lhasa-Qiangtang collision. We propose that the transition from the Bangong-Nujiang Tethyan subduction to the Lhasa-Qiangtang collision occurred during the Late Cretaceous in central Tibet.

Descartes region - Evidence for Copernican-age volcanism.

NASA Technical Reports Server (NTRS)

Head, J. W., III; Goetz, A. F. H.

1972-01-01

A model that suggests that the high-albedo central region of the Descartes Formation was formed by Copernican-age volcanism was developed from Orbiter photography, Apollo 12 multispectral photography, earth-based spectrophotometry, and thermal IR and radar data. The bright surface either is abundant in centimeter-sized rocks or is formed from an insulating debris layer overlying a surface with an abundance of rocks in the 1- to 20-cm size range. On the basis of these data, the bright unit is thought to be a young pyroclastic deposit mantling older volcanic units of the Descartes Formation. Since the Apollo 16 target point is only 50 km NW of the central part of this unit, evidence for material associated with this unique highland formation should be searched for in returned soil and rock samples.

Nickel distribution and isotopic fractionation in a Brazilian lateritic regolith: Coupling Ni isotopes and Ni K-edge XANES

NASA Astrophysics Data System (ADS)

Ratié, G.; Garnier, J.; Calmels, D.; Vantelon, D.; Guimarães, E.; Monvoisin, G.; Nouet, J.; Ponzevera, E.; Quantin, C.

2018-06-01

Ultramafic (UM) rocks are known to be nickel (Ni) rich and to weather quickly, which makes them a good candidate to look at the Ni isotope systematics during weathering processes at the Earth's surface. The present study aims at identifying the Ni solid speciation and discussing the weathering processes that produce Ni isotope fractionation in two deep laterite profiles under tropical conditions (Barro Alto, Goiás State, Brazil). While phyllosilicates and to a lower extent goethite are the main Ni-bearing phases in the saprolitic part of the profile, iron (Fe) oxides dominate the Ni budget in the lateritic unit. Nickel isotopic composition (δ60Ni values) has been measured in each unit of the regolith, i.e., rock, saprock, saprolite and laterite (n = 52). δ60Ni varies widely within the two laterite profiles, from -0.10 ± 0.05‰ to 1.43 ± 0.05‰, showing that significant Ni isotope fractionation occurs during the weathering of UM rocks. Overall, our results show that during weathering, the solid phase is depleted in heavy Ni isotopes due to the preferential sorption and incorporation of light Ni isotopes into Fe oxides; the same mechanisms likely apply to the incorporation of Ni into phyllosilicates (type 2:1). However, an isotopically heavy Ni pool is observed in the solid phase at the bottom of the saprolitic unit. This feature can be explained by two hypotheses that are not mutually exclusive: (i) a depletion in light Ni isotopes during the first stage of weathering due to the preferential dissolution of light Ni-containing minerals, and (ii) the sorption or incorporation of isotopically heavy Ni carried by percolating waters (groundwater samples have δ60Ni of 2.20 and 2.27‰), that were enriched in heavy Ni isotopes due to successive weathering processes in the overlying soil and laterite units.

Hydrogeology and Hydrologic Landscape Regions of Nevada

USGS Publications Warehouse

Maurer, Douglas K.; Lopes, Thomas J.; Medina, Rose L.; Smith, J. LaRue

2004-01-01

In 1999, the U.S. Environmental Protection Agency initiated a rule to protect ground water in areas other than source-water protection areas. These other sensitive ground water areas (OSGWAs) are aquifers that are not currently but could eventually be used as a source of drinking water. The OSGWA program specifically addresses existing wells that are used for underground injection of motor vehicle waste. If the injection well is in a ground-water protection area or an OSGWA, well owners must either close the well or apply for a permit. The Nevada Division of Environmental Protection will evaluate site-specific information and determine if the aquifer associated with a permit application is susceptible to contamination. A basic part of evaluating OSGWAs is characterizing the hydrogeology of aquifer systems including the lithology, hydrologic properties, soil permeability, and faulting, which partly control the susceptibility of ground water to contamination. Detailed studies that evaluate ground-water susceptibility are not practical in a largely unpopulated State like Nevada. However, existing and new information could be extrapolated to other areas of the State if there is an objective framework to transfer the information. The concept of hydrologic landscape regions, which identify areas with similar hydrologic characteristics, provides this framework. This report describes the hydrogeology and hydrologic landscape regions of Nevada. Consolidated rocks that form mountain ranges and unconsolidated sediments that fill the basins between the ranges are grouped into hydrogeologic units having similar lithology and assumed to have similar hydrologic properties. Consolidated rocks and unconsolidated sediments are the two major hydrogeologic units and comprise 51 and 49 percent of the State, respectively. Consolidated rocks are subdivided into 8 hydrogeologic units. In approximate order of decreasing horizontal hydraulic conductivity, consolidated-rock hydrogeologic units consist of: (1) carbonate rocks, Quaternary to Tertiary age; (2) basaltic, (3) rhyolitic, and (4) andesitic volcanic flows; (5) volcanic breccias, tuffs, and volcanic rocks older than Tertiary age; (6) intrusive and metamorphic rocks; (7) consolidated and semi-consolidated tuffaceous rocks and sediments; and (8) clastic rocks consisting of sandstone and siltstone. Unconsolidated sediments are subdivided into four hydrogeologic units on the basis of flow regime, topographic slope, and mapped stream channels. The four units are (1) alluvial slopes, (2) valley floors, (3) fluvial deposits, and (4) playas. Soil permeability was grouped into five descriptive categories ranging from very high to very low, which generally correspond to mapped geomorphic features such as playas and alluvial slopes. In general, soil permeability is low to moderate in northern, northeastern, and eastern Nevada and high to very high in western, southwestern, and southern Nevada. Within a particular basin, soil permeability decreases downslope from the bedrock contact. The type of parent rock, climate, and streamflow velocities are factors that likely cause these spatial patterns. Faults in unconsolidated sediments usually are barriers to ground-water flow. In consolidated rocks, permeability and ground-water flow is reduced in directions normal to the fault zone and increased in directions parallel to the fault zone. With time, mineral precipitation may seal fractures in consolidated rocks, reducing the permeability. However, continued movement along the fault may form new fractures, resulting in a fault alternating from a zone of preferred flow to a flow barrier during geologic time. The effect of faults on ground-water flow at a particular location is difficult to determine without a site- specific investigation. Hydrologic landscape regions were delineated by overlaying a grid of 100-foot (30-meter) cells over the State, estimating the value of five variables for each cell, an

The British Geological Survey's Lexicon of Named Rock Units as Online and Linked Data

NASA Astrophysics Data System (ADS)

McCormick, T.

2012-12-01

The British Geological Survey's Lexicon of Named Rock Units provides freely accessible definitions and supplementary information about geological units of Great Britain, Northern Ireland, and their associated continental shelf. It is an online database that can be searched at www.bgs.ac.uk/Lexicon/. It has existed since 1990 (under different names) but the database and user interface have recently been completely redesigned to improve their semantic capabilities and suitability for describing different styles of geology. The data are also now freely available as linked data from data.bgs.ac.uk/. The Lexicon of Named Rock Units serves two purposes. First, it is a dictionary, defining and constraining the geological units that are referenced in the Survey's data sets, workflows, products and services. These can include printed and digital geological maps at a variety of scales, reports, books and memoirs, and 3- and 4-dimensional geological models. All geological units referenced in any of these must first be present and defined, at least to a basic level of completeness, in the Lexicon database. Only then do they become available for use. The second purpose of the Lexicon is as a repository of knowledge about the geology of the UK and its continental shelf, providing authoritative descriptions written and checked by BGS geoscientists. Geological units are assigned to one of four themes: bedrock, superficial, mass movement and artificial. They are further assigned to one of nine classes: lithostratigraphical, lithodemic intrusive, lithodemic tectono-metamorphic, lithodemic mixed, litho-morpho-genetic, man-made, age-based, composite, and miscellaneous. The combination of theme and class controls the fields that are available to describe each geological unit, so that appropriate fields are offered for each, whether it is a Precambrian tectono-metamorphic complex, a Devonian sandstone formation, or a Devensian river terrace deposit. Information that may be recorded about each unit includes its rank, parentage, previous and alternative names and usage, geochronological age, lithology, environment of deposition / mode of origin, thickness, boundaries, type and reference localities and sections, geographical distribution, associated landforms, and literature references. BGS geoscientists use a web-based 'sandbox' system to write and revise definitions. The Lexicon currently stores information on approximately 13,400 geological units that BGS considers to be 'current', with cross references to some 6,000 other names that are considered to be obsolete or alternative names. The entries span the entire preserved geological history of the UK from Archaean to Recent, onshore and offshore.

Hydrogeology and geochemistry of low-permeability oil-shales - Case study from HaShfela sub-basin, Israel

NASA Astrophysics Data System (ADS)

Burg, Avihu; Gersman, Ronen

2016-09-01

Low permeability rocks are of great importance given their potential role in protecting underlying aquifers from surface and buried contaminants. Nevertheless, only limited data for these rocks is available. New appraisal wells drilled into the oil shale unit (OSU) of the Mt. Scopus Group in the HaShfela sub-basin, Central Israel, provided a one-time opportunity for detailed study of the hydrogeology and geochemistry of this very low permeability unit. Methods used include: slug tests, electrical logs, televiewer imaging, porosity and permeability measurements on core samples, chemical analyses of the rock column and groundwater analyses. Slug tests yielded primary indication to the low permeability of the OSU despite its high porosity (30-40%). Hydraulic conductivities as low as 10-10-10-12 m/s were calculated, using both the Hvorslev and Cooper-Bredehoeft-Papadopulos decoding methods. These low conductivities were confirmed by direct measurements of permeability in cores, and from calculations based on the Kozeny-Carman approach. Storativity was found to be 1 · 10-6 and specific storage - 3.8 · 10-9 m-1. Nevertheless, the very limited water flow in the OSU is argued to be driven gravitationally. The extremely slow recovery rates as well as the independent recovery of two adjacent wells, despite their initial large head difference of 214 m, indicate that the natural fractures are tight and are impermeable due to the confining stress at depth. Laboratory measured permeability is similar or even higher than the field-measured values, thereby confirming that fractures and bedding planes do not form continuous flow paths. The vertical permeability along the OSU is highly variable, implying hydraulic stratification and extremely low vertical hydraulic conductivity. The high salinity of the groundwater (6300-8000 mgCl/L) within the OSU and its chemical and isotopic compositions are explained by the limited water flow, suggesting long residence time of the water, prolonged water-rock interaction and mixing with ancient trapped salty water. The current study demonstrates that targeted and detailed research of low permeability rocks can produce reliable hydraulic parameters using slug tests and accompanying methods. The data produced is of upmost importance for quantitative risk evaluations such as models for waste burial in low permeability units.

Islas Marias Archipelago, Mexico. A Missing Piece to Reconstruct the Paleoposition of Baja California

NASA Astrophysics Data System (ADS)

Schaaf, P. E.; Pompa, V.; Hernandez, T.; Weber, B.; Solis, G.; Villanueva, D.; Perez-Venzor, J.

2011-12-01

Paleopositions for southern Baja California peninsula have yielded controversial models over the past 30 years. Mainly based on paleomagnetic data many hypotheses place Baja at lower paleolatitudes in front of southern Mexico or Central America with subsequent northward translations. Other models suggest minor, if any, northward displacements with respect to continental Mexico combined with clockwise rotations. Lithological, geochemical, and geochronological similarities for southern Baja California and Puerto Vallarta (western Mexico Pacific margin) igneous rocks seem to confirm the latter model. To further prove this model we have mapped and collected rocks from Maria Madre, the largest island of the Islas Marias archipelago, located in the mouth of the Gulf of California. In an area of only 145 square kilometers, metamorphic basements rocks (ortho and migmatitic gneisses), highly deformed metasediments, granitoids, acid to intermediate volcanic sequences, and a cover with gently folded marine sediments are exposed. The basement complex with gneisses and metasediments, including garnet-bearing paragneiss and calc silicates, as well as the granodioritic-tonalitic intrusives display an extraordinary accordance with similar units observed in the Los Cabos Block (LCB) of Baja California Sur. Furthermore, U-Pb zircon ages of 162 and 170 Ma for the basement gneisses and of 80 Ma for the granitoids have been reported also from the LCB. Additionally, upper Cretaceous intrusive ages are well known from the Puerto Vallarta batholith in Jalisco and Nayarit, mainland Mexico. Geochemical and isotopic data as well as Nd model ages confirm a magmatic consanguinity of LCB, Islas Marias, and Puerto Vallarta granitoids. The volcanic units of Maria Madre Island include ignimbrites and effusive dacitic-rhyolithic rocks, which can be correlated to the Sierra Madre Occidental province and the Comundú Formation of Baja California. Age determinations are under work to confirm this hypothesis. Finally, the sedimentary cover record several subsidence and uplift events, possibly related to the opening of the Gulf of California. Micropaleontological investigations on Neogene deposits give evidence for an above sea level position of the islands since the late Pleistocene. In summary, our new lithological, geochemical, and geochronological investigations on the Isla María Madre rock suite confirm a common magmatic arc parenthood of these units with respect to mainland Mexico at latitudes of Puerto Vallarta and with the LCB of Baja California Sur. Large paleolatitudal displacements of Baja can be discarded from these results.

Chronology of early Archaean granite-greenstone evolution in the Barberton Mountain Land, South Africa, based on precise dating by single zircon evaporation.

PubMed

Krüner, A; Byerly, G R; Lowe, D R

1991-04-01

We report precise 207Pb/206Pb single zircon evaporation ages for low-grade felsic metavolcanic rocks within the Onverwacht and Fig Tree Groups of the Barberton Greenstone Belt (BGB), South Africa, and from granitoid plutons bordering the belt. Dacitic tuffs of the Hooggenoeg Formation in the upper part of the Onverwacht Group yield ages between 3445 +/- 3 and 3416 +/- 5 Ma and contain older crustal components represented by a 3504 +/- 4 Ma old zircon xenocryst. Fig Tree dacitic tuffs and agglomerates have euhedral zircons between 3259 +/- 5 and 3225 +/- 3 Ma in age which we interpret to reflect the time of crystallization. A surprisingly complex xenocryst population in one sample documents ages from 3323 +/- 4 to 3522 +/- 4 Ma. We suspect that these xenocrysts were inherited, during the passage of the felsic melts to the surface, from various sources such as greenstones and granitoid rocks now exposed in the form of tonalite-trondhjemite plutons along the southern and western margins of the BGB, and units predating any of the exposed greenstone or intrusive rocks. Several of the granitoids along the southern margin of the belt have zircon populations with ages between 3490 and 3440 Ma. coeval with or slightly older than Onverwacht felsic volcanism, while the Kaap Valley pluton along the northwestern margin of the belt is coeval with Fig Tree dacitic volcanism. These results emphasize the comagmatic relationships between greenstone felsic volcanic units and the surrounding plutonic suites. Some of the volcanic plutonic units contain zircon xenocrysts older than any exposed rocks. These indicate the existence of still older units, possibly stratigraphically lower and older portions of the greenstone sequence itself, older granitoid intrusive rocks, or bodies of older, unrelated crustal material. Our data show that the Onverwacht and Fig Tree felsic units have distinctly different ages and therefore do not represent a single, tectonically repeated unit as proposed by others. Unlike the late Archaean Abitibi greenstone belt in Canada, which formed over about 30 Ma. exposed rocks in the BGB formed over a period of at least 220 Ma. The complex zircon populations encountered in this study imply that conventional multigrain zircon dating may not accurately identify the time of felsic volcanic activity in ancient greenstones. A surprising similarity in rock types, tectonic evolution, and ages of the BGB in the Kaapvaal craton of southern Africa and greenstones in the Pilbara Block of Western Australia suggests that these two terrains may have been part of a larger crustal unit in early Archaean times.

Reconnaissance geology of the Thaniyah Quadrangle, sheet 20/42 C, Kingdom of Saudi Arabia

USGS Publications Warehouse

Greene, Robert C.

1983-01-01

The Thaniyah quadrangle, sheet 20/42 C, is located in the transition zone between the Hijaz Mountains and the Najd Plateau of southwestern Saudi Arabia between lat 20?00' and 20?30' N., long 42?00' to 42?30' E. The quadrangle is underlain by Precambrian metavolcanic, metasedimentary, plutonic, and dike rocks. Metavolcanic rocks consist of metamorphosed basalt and andesite with minor dacite and rhyolite and underlie three discontinuous northwest-trending belts. Metasedimentary rocks are confined to small areas underlain by quartzite, metasandstone, marble, and calc-silicate rock. Plutonic rocks include an extensive unit of tonalite and quartz diorite and a smaller unit of diorite and quartz diorite, which occupy much of the central part of the quadrangle. A small body of diorite and gabbro and a two-part zone of tonalite gneiss are also present. All of these plutonic rocks are assigned to the An Nimas batholith. Younger plutonic rocks include extensive graphic granite and rhyolite in the northeastern part of the quadrangle and several smaller bodies of granitic rocks and of gabbro. The metavolcanic rocks commonly have strong foliation with northwest strike and steep to vertical dip. Diorite and quartz diorite are sheared and brecciated and apparently syntectonic. Tonalite and quartz diorite are both foliate and nonfoliate and were intruded in episodes both preceding and following shearing. The granitic rocks and gabbro are post-tectonic. Trends of faults and dikes are mostly related to the Najd faulting episode. Radiometric ages, mostly from adjacent quadrangles, suggest that the An Nimas batholith is 835 to 800 Ma, gabbro and granite, except the graphic granite and rhyolite unit, are about 640 to 615 Ma, and the graphic granite and rhyolite 575 to 565 Ma old. Metavolcanic rocks similar to those hosting copper and gold mineralization in the Wadi Shuwas mining district adjacent to the southwestern part of the quadrangle are abundant. An ancient copper mine was discovered at the edge of the tonalite gneiss belt east of Wadi Ranyah. Granite and gabbro have economic potential as building stone.

North Slope, Alaska: Source rock distribution, richness, thermal maturity, and petroleum charge

USGS Publications Warehouse

Peters, K.E.; Magoon, L.B.; Bird, K.J.; Valin, Z.C.; Keller, M.A.

2006-01-01

Four key marine petroleum source rock units were identified, characterized, and mapped in the subsurface to better understand the origin and distribution of petroleum on the North Slope of Alaska. These marine source rocks, from oldest to youngest, include four intervals: (1) Middle-Upper Triassic Shublik Formation, (2) basal condensed section in the Jurassic-Lower Cretaceous Kingak Shale, (3) Cretaceous pebble shale unit, and (4) Cretaceous Hue Shale. Well logs for more than 60 wells and total organic carbon (TOC) and Rock-Eval pyrolysis analyses for 1183 samples in 125 well penetrations of the source rocks were used to map the present-day thickness of each source rock and the quantity (TOC), quality (hydrogen index), and thermal maturity (Tmax) of the organic matter. Based on assumptions related to carbon mass balance and regional distributions of TOC, the present-day source rock quantity and quality maps were used to determine the extent of fractional conversion of the kerogen to petroleum and to map the original TOC (TOCo) and the original hydrogen index (HIo) prior to thermal maturation. The quantity and quality of oil-prone organic matter in Shublik Formation source rock generally exceeded that of the other units prior to thermal maturation (commonly TOCo > 4 wt.% and HIo > 600 mg hydrocarbon/g TOC), although all are likely sources for at least some petroleum on the North Slope. We used Rock-Eval and hydrous pyrolysis methods to calculate expulsion factors and petroleum charge for each of the four source rocks in the study area. Without attempting to identify the correct methods, we conclude that calculations based on Rock-Eval pyrolysis overestimate expulsion factors and petroleum charge because low pressure and rapid removal of thermally cracked products by the carrier gas retards cross-linking and pyrobitumen formation that is otherwise favored by natural burial maturation. Expulsion factors and petroleum charge based on hydrous pyrolysis may also be high compared to nature for a similar reason. Copyright ?? 2006. The American Association of Petroleum Geologists. All rights reserved.

Stratigraphy of Slick Rock district and vicinity, San Miguel and Dolores Counties, Colorado

USGS Publications Warehouse

Shawe, Daniel R.; Simmons, George C.; Archbold, Norbert L.

1968-01-01

The Slick Rock district covers about 570 square miles in western San Miguel and Dolores Counties, in southwestern Colorado. It is at the south edge of the salt-anticline region of southwestern Colorado and southeastern Utah and of the Uravan mineral belt.Deposition of Paleozoic sedimentary rocks in the district and vicinity was principally controlled by development of the Paradox Basin, and of Mesozoic rocks by development of a depositional basin farther west. The Paleozoic rocks generally are thickest at the northeast side of the Paradox Basin in a northwest- trending trough which seems to be a wide graben in Precambrian igneous and metamorphic basement rocks; Mesozoic rocks generally thicken westward and southwestward from the district.Sedimentary rocks rest on a Precambrian basement consisting of a variety of rocks, including granite and amphibolite. The surface of the Precambrian rocks is irregular and generally more than 2,000 feet below sea level and 7,000-11,000 feet below the ground surface. In the northern part of the district the Precambrian surface plunges abruptly northeastward into the trough occupying the northeast side of the Paradox Basin, and in the southern part it sags in a narrow northeasterly oriented trough. Deepening of both troughs, or crustal deformation in their vicinity, influenced sedimentation during much of late Paleozoic and Mesozoic time.The maximum total thickness of sedimentary rocks underlying the district is 13,000 feet, and prior to extensive erosion in the late Tertiary and the Quaternary it may have been as much as about 18,000 feet. The lower 5,000 feet or more of the sequence of sedimentary rocks consists of arenaceous strata of early Paleozoic age overlain by dominantly marine carbonate rocks and evaporite beds interbedded with lesser amounts of clastic sediments of late Paleozoic age. Overlying these rocks is about 4,500 feet of terrestrial clastic sediments, dominantly sandstone with lesser amounts of shale, mudstone, siltstone, and conglomerate, of late Paleozoic and Mesozoic age. Above these rocks is as much as 2,300 feet of marine shale of late Mesozoic age. Perhaps about 5,000 feet of clastic sedimentary rocks, dominantly sandstone and in part shale, of late Mesozoic and early Cenozoic age, overlay the older rocks of the district prior to late Cenozoic erosion...Outside the Slick Rock district the Mancos Shale is overlain by dominantly terrestrial sandstone, mudstone, and coaly beds of the Mesaverde Group of Late Cretaceous age, and younger units such as the Wasatch and Green River Formations of Tertiary age, which once may have extended across the district. These units, totaling possibly 5,000 feet in thickness, were removed by erosion following middle Tertiary uplift of the Colorado Plateau.Igneous rocks of Tertiary age crop out in only one small area in the district, but they are intruded extensively in the Mancos Shale east of the district, and, as shown by deep oil test wells, appear to be intruded widely in the Paradox Member of the Hermosa Formation in the southern part of the district and southeast of the district. Andesite porphyry occurs in a dike on Glade Mountain, microgranogabbro and microgranodiorite occur in thin sills east of the district, and rocks of similar composition form thick sills in the subsurface. All are similar chemically to igneous rocks in the San Juan Mountains southeast of the district and probably were the result of a specific igneous episode. They were intruded most likely during the Miocene.Surficial deposits of Quaternary age include glacial till, terrace gravels, alluvial fans, landslide debris, loess, other soil, alluvium, colluvium, and talus. On Glade Mountain, glacial till of probable early Pleistocene age merges westward with terrace gravels that are correlative with terrace gravels which lie on an old weathered surface of Mancos Shale farther west on the rim of the Dolores River Canyon.

Publications - GMC 20 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

, rock-eval/pyrolysis, total organic carbon) and core logs for the David River USA #1-A, Hoodoo Lake Unit , 1969, Geochemical analysis (vitrinite reflectance, visual kerogen, rock-eval/pyrolysis, total organic gmc020.pdf (3.2 M) Keywords Kerogen; Pyrolysis; Rock-Eval Pyrolysis; Total Organic Carbon; Vitrinite

Welcome to Rock Day

ERIC Educational Resources Information Center

Varelas, Maria; Benhart, Jeaneen

2004-01-01

At the beginning of the school year, the authors, a first-grade teacher and a teacher educator, worked together to "spice up" the first-grade science curriculum. The teacher had taught the unit Rocks, Sand, and Soil several times, conducting hands-on explorations and using books to help students learn about properties of rocks, but she felt the…

Geology and mineral deposits of an area in the Departments of Antioquia and Caldas (Subzone IIB), Colombia

USGS Publications Warehouse

Feininger, Tomas; Barrero L., Dario; Castro, Nestor; Hall, R.B.

1973-01-01

The Inventario Minero National (IMN), a four-year cooperative geologic mapping and mineral resources appraisal project, was accomplished under an agreement between the Republic of Colombia and the U. S. Agency for International Development from 1964 through 1969. Subzone IIB, consisting essentially of the east half of Zone comprises nearly 20,000 km2 principally in the Department of Antioquia but including also small parts of the Departments of Caldas and Tolima. The rocks in IIB range from Precambrian to Holocene. Precambrian feldspar-quartz gneiss occupies a mosaic of fault-bounded blocks intruded by igneous rocks between the Oto fault and the Rio Magdalena. Paleozoic rocks are extensive, and include lightly metamorphosed graptolite-bearing Ordovician shale at Cristalina, and a major suite of graphitic quartz-mica schist, feldspathic and aluminous gneiss, quartzite, marble, amphibolite, and other rocks. Syntectonic intrusive gneiss included many of the older rocks during a late Paleozoic(?) orogeny, which was accompanied by Abukuma-type metamorphosing from lowermost greenschist to upper amphibolite facies. A Jurassic diorite pluton bounded by faults cuts volcanic rocks of unknown age east of the Otu fault. Cretaceous rocks are major units. Middle Cretaceous carbonaceous shale, sandstone, graywacke, conglomerate, and volcanic rocks are locally prominent. The Antioquian batholith (quartz diorite) of Late Cretaceous age cuts the middle Cretaceous and older rocks. A belt of Tertiary nonmarine clastic sedimentary rocks crops out along the Magdalena Valley. Patches of Tertiary alluvium are locally preserved in the mountains. Quaternary alluvium, much of it auriferous, is widespread in modern stream valleys. Structurally IIB constitutes part of a vast complex synclinorium intruded concordantly by syntectonic catazonal or mesozonal felsic plutons, and by the later epizonal post-tectonic Antioquian batholith. Previously unrecognized major wrench faults are outstanding structural features of IIB. Some are traceable for several hundred kilometers and probably have displacements measurable in kilometers, although only the Palestina fault, with right-lateral displacement of 27.7 km, is accurately documented. Correlations of rocks mapped in IIB with those of outlying areas including neighboring IIA are discussed.

Mapping the Mineral Resource Base for Mineral Carbon-Dioxide Sequestration in the Conterminous United States

USGS Publications Warehouse

Krevor, S.C.; Graves, C.R.; Van Gosen, B. S.; McCafferty, A.E.

2009-01-01

This database provides information on the occurrence of ultramafic rocks in the conterminous United States that are suitable for sequestering captured carbon dioxide in mineral form, also known as mineral carbon-dioxide sequestration. Mineral carbon-dioxide sequestration is a proposed greenhouse gas mitigation technology whereby carbon dioxide (CO2) is disposed of by reacting it with calcium or magnesium silicate minerals to form a solid magnesium or calcium carbonate product. The technology offers a large capacity to permanently store CO2 in an environmentally benign form via a process that takes little effort to verify or monitor after disposal. These characteristics are unique among its peers in greenhouse gas disposal technologies. The 2005 Intergovernmental Panel on Climate Change report on Carbon Dioxide Capture and Storage suggested that a major gap in mineral CO2 sequestration is locating the magnesium-silicate bedrock available to sequester the carbon dioxide. It is generally known that silicate minerals with high concentrations of magnesium are suitable for mineral carbonation. However, no assessment has been made in the United States that details their geographical distribution and extent, nor has anyone evaluated their potential for use in mineral carbonation. Researchers at Columbia University and the U.S. Geological Survey have developed a digital geologic database of ultramafic rocks in the conterminous United States. Data were compiled from varied-scale geologic maps of magnesium-silicate ultramafic rocks. The focus of our national-scale map is entirely on ultramafic rock types, which typically consist primarily of olivine- and serpentine-rich rocks. These rock types are potentially suitable as source material for mineral CO2 sequestration.

Executive summary--2002 assessment of undiscovered oil and gas resources in the San Juan Basin Province, exclusive of Paleozoic rocks, New Mexico and Colorado: Chapter 1 in Total petroleum systems and geologic assessment of undiscovered oil and gas resources in the San Juan Basin Province, exclusive of Paleozoic rocks, New Mexico and Colorado

USGS Publications Warehouse

,

2013-01-01

In 2002, the U.S. Geological Survey (USGS) estimated undiscovered oil and gas resources that have the potential for additions to reserves in the San Juan Basin Province (5022), New Mexico and Colorado (fig. 1). Paleozoic rocks were not appraised. The last oil and gas assessment for the province was in 1995 (Gautier and others, 1996). There are several important differences between the 1995 and 2002 assessments. The area assessed is smaller than that in the 1995 assessment. This assessment of undiscovered hydrocarbon resources in the San Juan Basin Province also used a slightly different approach in the assessment, and hence a number of the plays defined in the 1995 assessment are addressed differently in this report. After 1995, the USGS has applied a total petroleum system (TPS) concept to oil and gas basin assessments. The TPS approach incorporates knowledge of the source rocks, reservoir rocks, migration pathways, and time of generation and expulsion of hydrocarbons; thus the assessments are geologically based. Each TPS is subdivided into one or more assessment units, usually defined by a unique set of reservoir rocks, but which have in common the same source rock. Four TPSs and 14 assessment units were geologically evaluated, and for 13 units, the undiscovered oil and gas resources were quantitatively assessed.

Research core drilling in the Manson impact structure, Iowa

NASA Technical Reports Server (NTRS)

Anderson, R. R.; Hartung, J. B.; Roddy, D. J.; Shoemaker, E. M.

1992-01-01

The Manson impact structure (MIS) has a diameter of 35 km and is the largest confirmed impact structure in the United States. The MIS has yielded a Ar-40/Ar-39 age of 65.7 Ma on microcline from its central peak, an age that is indistinguishable from the age of the Cretaceous-Tertiary boundary. In the summer of 1991 the Iowa Geological Survey Bureau and U.S. Geological Survey initiated a research core drilling project on the MIS. The first core was beneath 55 m of glacial drift. The core penetrated a 6-m layered sequence of shale and siltstone and 42 m of Cretaceous shale-dominated sedimentary clast breccia. Below this breccia, the core encountered two crystalline rock clast breccia units. The upper unit is 53 m thick, with a glassy matrix displaying various degrees of devitrification. The upper half of this unit is dominated by the glassy matrix, with shock-deformed mineral grains (especially quartz) the most common clast. The glassy-matrix unit grades downward into the basal unit in the core, a crystalline rock breccia with a sandy matrix, the matrix dominated by igneous and metamorphic rock fragments or disaggregated grains from those rocks. The unit is about 45 m thick, and grains display abundant shock deformation features. Preliminary interpretations suggest that the crystalline rock breccias are the transient crater floor, lifted up with the central peak. The sedimentary clast breccia probably represents a postimpact debris flow from the crater rim, and the uppermost layered unit probably represents a large block associated with the flow. The second core (M-2) was drilled near the center of the crater moat in an area where an early crater model suggested the presence of postimpact lake sediments. The core encountered 39 m of sedimentary clast breccia, similar to that in the M-1 core. Beneath the breccia, 120 m of poorly consolidated, mildly deformed, and sheared siltstone, shale, and sandstone was encountered. The basal unit in the core was another sequence of sedimentary clast breccia. The two sedimentary clast units, like the lithologically similar unit in the M-1 core, probably formed as debris flows from the crater rim. The middle, nonbrecciated interval is probably a large, intact block of Upper Cretaceous strata transported from the crater rim with the debris flow. Alternatively, the sequence may represent the elusive postimpact lake sequence.

Cross sections showing stratigraphic and depositional lithofacies of upper Cambrian rocks and the relation of lithofacies to potential for Mississippi Valley-type mineralization in the Harrison 1° x 2° quadrangle, Missouri and Arkansas (folio of the Harrison 1 degree by 2 degrees quadrangle, Missouri and Arkansas)

USGS Publications Warehouse

Hayes, Timothy S.; Palmer, James R.; Pratt, Walden P.; Krizanich, Gary; Whitfield, John W.; Seeger, Cheryl M.

1997-01-01

These cross sections are the fifth publication in a folio of maps of the Harrison 1° x 2° quadrangle, Missouri and Arkansas, prepared under the Conterminous United States Mineral Assessment Program (CUSMAP). Previously published maps in this folio relate to the geochemistry of the subsurface carbonate rocks (Erickson and others, 1989), the geophysics of the basement terranes (McCafferty and others, 1989), the sedimentary rocks and mineralization of the Caulfield district (Hayes and others, 1992), the mineral resource potential of the quadrangle (Pratt and others, 1993), and the bedrock geology of the quadrangle (Middendorf and others, 1994 and in press). A final set of maps showing locations of known Mississippi Valley-type deposits and occurrences relative to Late Cambrian shaly lithofacies and other shales in the Harrison and adjoining quadrangle is in preparation (Palmer and Hayes, in press).

The Silent Canyon caldera complex: a three-dimensional model based on drill-hole stratigraphy and gravity inversion

USGS Publications Warehouse

McKee, Edwin H.; Hildenbrand, Thomas G.; Anderson, Megan L.; Rowley, Peter D.; Sawyer, David A.

1999-01-01

The structural framework of Pahute Mesa, Nevada, is dominated by the Silent Canyon caldera complex, a buried, multiple collapse caldera complex. Using the boundary surface between low density Tertiary volcanogenic rocks and denser granitic and weakly metamorphosed sedimentary rocks (basement) as the outer fault surfaces for the modeled collapse caldera complex, it is postulated that the caldera complex collapsed on steeply- dipping arcuate faults two, possibly three, times following eruption of at least two major ash-flow tuffs. The caldera and most of its eruptive products are now deeply buried below the surface of Pahute Mesa. Relatively low-density rocks in the caldera complex produce one of the largest gravity lows in the western conterminous United States. Gravity modeling defines a steep sided, cup-shaped depression as much as 6,000 meters (19,800 feet) deep that is surrounded and floored by denser rocks. The steeply dipping surface located between the low-density basin fill and the higher density external rocks is considered to be the surface of the ring faults of the multiple calderas. Extrapolation of this surface upward to the outer, or topographic rim, of the Silent Canyon caldera complex defines the upper part of the caldera collapse structure. Rock units within and outside the Silent Canyon caldera complex are combined into seven hydrostratigraphic units based on their predominant hydrologic characteristics. The caldera structures and other faults on Pahute Mesa are used with the seven hydrostratigraphic units to make a three-dimensional geologic model of Pahute Mesa using the "EarthVision" (Dynamic Graphics, Inc.) modeling computer program. This method allows graphic representation of the geometry of the rocks and produces computer generated cross sections, isopach maps, and three-dimensional oriented diagrams. These products have been created to aid in visualizing and modeling the ground-water flow system beneath Pahute Mesa.

Total petroleum systems of the Paleozoic and Jurassic, Greater Ghawar Uplift and adjoining provinces of central Saudi Arabia and northern Arabian-Persian Gulf

USGS Publications Warehouse

Pollastro, Richard M.

2003-01-01

Oil of the Arabian Sub-Basin Tuwaiq/Hanifa-Arab TPS is sourced by organic-rich, marine carbonates of the Jurassic Tuwaiq Mountain and Hanifa Formations. These source rocks were deposited in two of three intraplatform basins during the Jurassic and, where thermally mature, have generated a superfamily of oils with distinctive geochemical characteristics. Oils were generated and expelled from these source rocks beginning in the Cretaceous at about 75 Ma. Hydrocarbon production is from 3 cyclic carbonate-rock reservoirs of the Arab Formation that are sealed by overlying anhydrite. Several giant and supergiant fields, including the world's largest oil field at Ghawar, Saudi Arabia, produce mostly from the Arab carbonate-rock reservoirs. Two assessment units are also recognized in the Arabian Sub-Basin Tuwaiq/Hanifa-Arab TPS that are similarly related to structural trap style and presence of underlying Infracambrian salt: (1) an onshore Horst-Block Anticlinal Oil AU, and (2) a mostly offshore Salt-Involved Structural Oil AU. The mean total volume of undiscovered resource for the Arabian Sub-Basin Tuwaiq/Hanifa-Arab TPS is estimated at about 49 billion barrels of oil equivalent (42 billion barrels of oil, 34 trillion feet of gas, and 1.4 billion barrels of natural gas liquids).

Sandstone units of the Lee Formation and related strata in eastern Kentucky

USGS Publications Warehouse

Rice, Charles L.

1984-01-01

Most of the Cumberland Plateau region of southeastern Kentucky is underlain by thick sequences of quartzose sandstone which are assigned for the most part to the Lee Formation. Much new information has been gathered about the Lee and related strata as a result of the cooperative mapping program of the U. S. Geological Survey and the Kentucky Geological Survey between 1960 and 1978. This report summarizes the age, lithology, distribution, sedimentary structures, and stratigraphic relations of the sandstone units of the Lee within and between each of three major outcrop belts in Kentucky: Cumberland Mountain, Pine Mountain, and the Pottsville Escarpment area. The Lee Formation generally has been regarded as Early Pennsylvanian in age and separated from Mississippian strata in Kentucky by an unconformity. However, lithostratigraphic units included in the formation as presently defined are broadly time-transgressive and range in age from Late Mississippian in parts of the Cumberland Mountain outcrop belt to Middle Pennsylvanian in the Pottsville Escarpment area. Members of the Lee intertongue with and grade into the underlying Pennington Formation and overlying Breathitt Formation. Sandstone and conglomeratic sandstone members of the Lee of Mississippian age found only in parts of the Cumberland overthrust sheet are closely associated with marine rocks; Pennsylvanian members are mostly associated with continental coal-bearing strata. Sandstone members of the Lee are mostly quartz rich and range from more than 90 percent to more than 99 percent quartz. They are relatively coarse grained, commonly pebbly, and in places conglomeratic. The units are southwest-trending linear or broadly lobate bodies. The Lee Formation is as much as 1,500 ft thick in the type area in Cumberland Mountain where it has been divided into eight members. The Pinnacle Overlook, Chadwell, White Rocks Sandstone, Middlesboro, Bee Rock Sandstone, and Naese Sandstone Members are mostly quartzose sandstone and conglomerate. The Dark Ridge and Hensley Members are mostly shale, siltstone, thin-bedded silty sandstone, and coal. The lower three of these members, the Pinnacle Overlook, Chadwell, and White Rocks Sandstone, are assigned to the Upper Mississippian Series because they intertongue with marine reddish or greenish shale and siltstone of the Pennington Formation or equivalent strata that contain a Late Mississippian fauna. The overlying quartzose sandstone members of the Lee commonly have coalified plant remains and impressions of plants and are Early to Middle Pennsylvanian in age; they are generally associated with terrestrial shale and siltstone containing coal beds and pinch out eastward into subgraywacke, siltstone, and shale. Although marine members commonly are bimodal, resultant transport directions for both marine and terrestrial members are southwesterly as determined by crossbedding. Thickness variations of the Middlesboro Member in the Cumberland overthrust sheet suggest that it represents tills of at least three major southwesterly trending paleovalleys. Thickness variations of the Bee Rock Sandstone Member east of Rocky Face fault and the combined Bee Rock and Naese Sandstone Members west of Rocky Face fault suggest that these members represent tills of at least two major southwesterly trending paleovalleys. East of Rocky Face fault, the Bee Rock is generally the uppermost member of the Lee; west of the fault, the overlying Naese is at the top. The Naese may range in age from Early to Middle Pennsylvanian and is partly or wholly equivalent to the Rockcastle Sandstone member of the Lee Formation in the area of the Pottsville Escarpment. The Mississippian-Pennsylvanian systemic boundary in the area of the Cumberland overthrust sheet in most places has been placed at an unconformity at the base of the Middlesboro Member; locally it is projected at the base of shales of the underlying Dark Ridge Member or equivalent strata in the Penningto

Across and along arc geochemical variations in altered volcanic rocks: Evidence from mineral chemistry of Jurassic lavas in northern Chile, and tectonic implications

NASA Astrophysics Data System (ADS)

Rossel, Pablo; Oliveros, Verónica; Ducea, Mihai N.; Hernandez, Laura

2015-12-01

Postmagmatic processes mask the original whole-rock chemistry of most Mesozoic igneous rocks from the Andean arc and back-arc units preserved in Chile. Mineral assemblages corresponding to subgreenschist metamorphic facies and/or propylitic hydrothermal alteration are ubiquitous in volcanic and plutonic rocks, suggesting element mobility at macroscopic and microscopic scale. However, fresh primary phenocrysts of clinopyroxene and plagioclase do occur in some of the altered rocks. We use major and trace element chemistry of such mineral phases to infer the geochemical variations of four Jurassic arc and four back-arc units from northern Chile. Clinopyroxene belonging to rocks of the main arc and two units of the bark-arc are augites with low contents of HFSE and REE; they originated from melting of an asthenospheric mantle source. Clinopyroxenes from a third back-arc unit show typical OIB affinities, with high Ti and trace element contents and low Si. Trace elemental variations in clinopyroxenes from these arc and back-arc units suggest that olivine and clinopyroxene were the main fractionating phases during early stages of magma evolution. The last back-arc unit shows a broad spectrum of clinopyroxene compositions that includes depleted arc-like augite, high Al and high Sr-Ca diopside (adakite-like signature). The origin of these lavas is the result of melting of a mixture of depleted mantle plus Sr-rich sediments and subsequent high pressure fractionation of garnet. Thermobarometric calculations suggest that the Jurassic arc and back-arc magmatism had at least one crustal stagnation level where crystallization and fractionation took place, located at ca. ~ 8-15 km. The depth of this stagnation level is consistent with lower-middle crust boundary in extensional settings. Crystallization conditions calculated for high Al diopsides suggest a deeper stagnation level that is not consistent with a thinned back-arc continental crust. Thus minor garnet fractionation occurred before these magmas reached the base of the crust. The presented data support the existence of a heterogeneous sub arc mantle and complex magmatic processes in the early stages of the Andean subduction.

Anomalously low strength of serpentinite sheared against granite and implications for creep on the Hayward and Calaveras Faults

USGS Publications Warehouse

Moore, Diane E.; Lockner, David A.; Ponce, David A.

2010-01-01

Serpentinized ophiolitic rocks are juxtaposed against quartzofeldspathic rocks at depth across considerable portions of the Hayward and Calaveras Faults. The marked compositional contrast between these rock types may contribute to fault creep that has been observed along these faults. To investigate this possibility, we are conducting hydrothermal shearing experiments to look for changes in frictional properties resulting from the shear of ultramafic rock juxtaposed against quartzose rock units. In this paper we report the first results in this effort: shear of bare-rock surfaces of serpentinite and granite, and shear of antigorite-serpentinite gouge between forcing blocks of granitic rock. All experiments were conducted at 250°C. Serpentinite sheared against granite at 50 MPa pore-fluid pressure is weaker than either rock type separately, and the weakening is significantly more pronounced at lower shearing rates. In contrast, serpentinite gouge sheared dry between granite blocks is as strong as the bare granite surface. We propose that the weakening is the result of a solution-transfer process involving the dissolution of serpentine minerals at grain-to-grain contacts. Dissolution of serpentine is enhanced by modifications to pore-fluid chemistry caused by interaction of the fluid with the quartz-bearing rocks. The compositional differences between serpentinized ultramafic rocks of the Coast Range Ophiolite and quartzofeldspathic rock units such as those of the Franciscan Complex may provide the mechanism for aseismic slip (creep) in the shallow crust along the Hayward, Calaveras, and other creeping faults in central and northern California.

Rock physics properties of some lunar samples

NASA Technical Reports Server (NTRS)

Warren, N.; Trice, R.; Anderson, O. L.; Soga, N.

1973-01-01

Linear strains and acoustic velocity data for lunar samples under uniaxial and hydrostatic loading are presented. Elastic properties are presented for 60335,20; 15555,68; 15498,23; and 12063,97. Internal friction data are summarized for a number of artificial lunar glasses with compositions similar to lunar rocks 12009, 12012, 14305, 15021, and 15555. Zero porosity model-rock moduli are calculated for a number of lunar model-rocks, with mineralogies similar to Apollo 12, 14, and 16 rocks. Model-rock calculations indicate that rock types in the troctolitic composition range may provide reasonable modeling of the lunar upper mantle. Model calculations involving pore crack effects are compatible with a strong dependence of rock moduli on pore strain, and therefore of rock velocities on nonhydrostatic loading. The high velocity of rocks under uniaxial loading appears to be compatible with, and may aid in, interpretation of near-surface velocity profiles observed in the active seismic experiment.

Geologic map of Lake Mead and surrounding regions, southern Nevada, southwestern Utah, and northwestern Arizona

USGS Publications Warehouse

Felger, Tracey J.; Beard, Sue

2010-01-01

Regional stratigraphic units and structural features of the Lake Mead region are presented as a 1:250,000 scale map, and as a Geographic Information System database. The map, which was compiled from existing geologic maps of various scales, depicts geologic units, bedding and foliation attitudes, faults and folds. Units and structural features were generalized to highlight the regional stratigraphic and tectonic aspects of the geology of the Lake Mead region. This map was prepared in support of the papers presented in this volume, Special Paper 463, as well as to facilitate future investigations in the region. Stratigraphic units exposed within the area record 1800 million years of geologic history and include Proterozoic crystalline rocks, Paleozoic and Mesozoic sedimentary rocks, Mesozoic plutonic rocks, Cenozoic volcanic and intrusive rocks, sedimentary rocks and surfi cial deposits. Following passive margin sedimentation in the Paleozoic and Mesozoic, late Mesozoic (Sevier) thrusting and Late Cretaceous and early Tertiary compression produced major folding, reverse faulting, and thrust faulting in the Basin and Range, and resulted in regional uplift and monoclinal folding in the Colorado Plateau. Cenozoic extensional deformation, accompanied by sedimentation and volcanism, resulted in large-magnitude high- and low-angle normal faulting and strike-slip faulting in the Basin and Range; on the Colorado Plateau, extension produced north-trending high-angle normal faults. The latest history includes integration of the Colorado River system, dissection, development of alluvial fans, extensive pediment surfaces, and young faulting.

Estimated Quantity of Water in Fractured Bedrock Units on Mt. Desert Island, and Estimated Ground-Water Use, Recharge, and Dilution of Nitrogen in Septic Waste in the Bar Harbor Area, Maine

USGS Publications Warehouse

Nielsen, Martha G.

2002-01-01

In 2002, the U.S. Geological Survey, in cooperation with the town of Bar Harbor, Maine, and the National Park Service, conducted a study to assess the quantity of water in the bedrock units underlying Mt. Desert Island, and to estimate water use, recharge, and dilution of nutrients from domestic septic systems overlying the bedrock units in several watersheds in rural Bar Harbor. Water quantity was calculated as the static volume of water in the top 600 feet of saturated thickness of the bedrock units. Volumes of water were estimated on the basis of effective fracture porosities for the five different rock types found on Mt. Desert Island. Values of porosities for the various bedrock units from the literature range more than five orders of magnitude, although the possible range in porosities for most individual rock types is on the order of three orders of magnitude. The static volume of water in the various units may range from a low of 4,000 gallons per acre for intrusive igneous rocks (primarily granites) to 20 million gallons per acre for the Cranberry Island Volcanics, but given the range in porosity estimates, these numbers can vary by orders of magnitude. Water-use data for the municipal water supply in the Town of Bar Harbor (1998-2000) indicate that residential usage averages 225 gallons per household per day. Recharge to the bedrock units in rural Bar Harbor was bracketed using low, medium, and high estimates, which were 3, 9, and 14 inches per year, respectively. Water use in 2001 was about 2.5 percent of the total estimated medium recharge (9 inches per year) in the study area. Dilution of nitrogen in septic effluent discharging to the bedrock aquifer was evaluated for the development density in 2001. On the basis of an assumed concentration of 47 mg/L of nitrogen in septic system discharge, dilution factors in populated rural Bar Harbor watersheds ranged from 4 to 151, for the housing density in 2001. Understanding that ground water in this fractured bedrock system mixes slowly, the fully mixed average nitrate-nitrogen concentrations in ground water estimated for the watersheds ranged from 0.1 to 11 mg/L.

Petrography and geochemistry of precambrian rocks from GT-2 and EE-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laughlin, A.W.; Eddy, A.

1977-08-01

During the drilling of GT-2 and EE-1, 27 cores totaling about 35 m were collected from the Precambrian section. Samples of each different lithology in each core were taken for petrographic and whole-rock major- and trace-element analyses. Whole-rock analyses are now completed on 37 samples. From these data four major Precambrian units were identified at the Fenton Hill site. Geophysical logs and cuttings were used to extrapolate between cores. The most abundant rock type is an extremely variable gneissic unit comprising about 75% of the rock penetrated. This rock is strongly foliated and may range compositionally from syenogranitic to tonaliticmore » over a few centimeters. The bulk of the unit falls within the monzogranite field. Interlayered with the gneiss is a ferrohastingsite-biotite schist which compositionally resembles a basaltic andesite. A fault contact between the schist and gneiss was observed in one core. Intrusive into this metamorphic complex are two igneous rocks. A leucocratic monzogranite occurs as at least two 15-m-thick dikes, and a biotite-granodiorite body was intercepted by 338 m of drill hole. Both rocks are unfoliated and equigranular. The biotite granodiorite is very homogeneous and is characterized by high modal contents of biotite and sphene and by high K/sub 2/O, TiO/sub 2/, and P/sub 2/O/sub 5/ contents. Although all of the cores examined show fractures, most of these are tightly sealed or healed. Calcite is the most abundant fracture filling mineral, but epidote, quartz, chlorite, clays or sulfides have also been observed. The degree of alteration of the essential minerals normally increases as these fractures are approached. The homogeneity of the biotite granodiorite at the bottom of GT-2 and the high degree of fracture filling ensure an ideal setting for the Hot Dry Rock Experiment.« less

Simulation of Ground-Water Flow in the Shenandoah Valley, Virginia and West Virginia, Using Variable-Direction Anisotropy in Hydraulic Conductivity to Represent Bedrock Structure

USGS Publications Warehouse

Yager, Richard M.; Southworth, Scott C.; Voss, Clifford I.

2008-01-01

Ground-water flow was simulated using variable-direction anisotropy in hydraulic conductivity to represent the folded, fractured sedimentary rocks that underlie the Shenandoah Valley in Virginia and West Virginia. The anisotropy is a consequence of the orientations of fractures that provide preferential flow paths through the rock, such that the direction of maximum hydraulic conductivity is oriented within bedding planes, which generally strike N30 deg E; the direction of minimum hydraulic conductivity is perpendicular to the bedding. The finite-element model SUTRA was used to specify variable directions of the hydraulic-conductivity tensor in order to represent changes in the strike and dip of the bedding throughout the valley. The folded rocks in the valley are collectively referred to as the Massanutten synclinorium, which contains about a 5-km thick section of clastic and carbonate rocks. For the model, the bedrock was divided into four units: a 300-m thick top unit with 10 equally spaced layers through which most ground water is assumed to flow, and three lower units each containing 5 layers of increasing thickness that correspond to the three major rock units in the valley: clastic, carbonate and metamorphic rocks. A separate zone in the carbonate rocks that is overlain by colluvial gravel - called the western-toe carbonate unit - was also distinguished. Hydraulic-conductivity values were estimated through model calibration for each of the four rock units, using data from 354 wells and 23 streamflow-gaging stations. Conductivity tensors for metamorphic and western-toe carbonate rocks were assumed to be isotropic, while conductivity tensors for carbonate and clastic rocks were assumed to be anisotropic. The directions of the conductivity tensor for carbonate and clastic rocks were interpolated for each mesh element from a stack of 'form surfaces' that provided a three-dimensional representation of bedrock structure. Model simulations were run with (1) variable strike and dip, in which conductivity tensors were aligned with the strike and dip of the bedding, and (2) uniform strike in which conductivity tensors were assumed to be horizontally isotropic with the maximum conductivity direction parallel to the N30 deg E axis of the valley and the minimum conductivity direction perpendicular to the horizontal plane. Simulated flow penetrated deeper into the aquifer system with the uniform-strike tensor than with the variable-strike-and-dip tensor. Sensitivity analyses suggest that additional information on recharge rates would increase confidence in the estimated parameter values. Two applications of the model were conducted - the first, to determine depth of recent ground-water flow by simulating the distribution of ground-water ages, showed that most shallow ground water is less than 10 years old. Ground-water age distributions computed by variable-strike-and-dip and uniform-strike models were similar, but differed beneath Massanutten Mountain in the center of the valley. The variable-strike-and-dip model simulated flow from west to east parallel to the bedding of the carbonate rocks beneath Massanutten Mountain, while the uniform-strike model, in which flow was largely controlled by topography, simulated this same area as an east-west ground-water divide. The second application, which delineated capture zones for selected well fields in the valley, showed that capture zones delineated with both models were similar in plan view, but differed in vertical extent. Capture zones simulated by the variable-strike-and-dip model extended downdip with the bedding of carbonate rock and were relatively shallow, while those simulated by the uniform-strike model extended to the bottom of the flow system, which is unrealistic. These results suggest that simulations of ground-water flow through folded fractured rock can be constructed using SUTRA to represent variable orientations of the hydraulic-conductivity tensor and produce a

A Review of Land and Stream Classifications in Support of Developing a National Ordinary High Water Mark (OHWM) Classification

DTIC Science & Technology

2014-08-01

northern Minnesota, Wisconsin, and Michigan. This region is dominated by igneous and metamorphic rock , with some sedimentary units and a generally...faulted igneous and metamorphic rocks and folded sediments in the Appalachians and flat-lying sedimentary rocks in the Plateau and Catskills. Streams...mixture of igneous, metamorphic , and sedimentary rocks . High relief and coarse materials are typical. Riffle and pool development is largely

Rock-Fluid Interactions Under Stress: How Rock Microstructure Controls The Evolution of Porosity and Permeability

NASA Astrophysics Data System (ADS)

Vanorio, T.

2016-12-01

Monitoring chemo-mechanical processes geophysically — e.g., fluid disposal or storage, thermal and chemical stimulation of reservoirs, or natural fluids simply entering a new system in the subsurface— raises numerous concerns because of the likelihood of fluid-rock chemical interactions and our limited ability to decipher the geophysical signature of coupled processes. One of the missing links is coupling the evolution of porosity, permeability, and velocity of rocks together with reactive transport, since rocks deform and their microstructure evolves, as a result of chemical reactions under stress. This study describes recent advances in rock-physics experiments to understand the effects of dissolution-induced compaction on acoustic velocity, porosity, and permeability. Data observation includes time-lapse experiments and imaging tracking transport and elastic properties, the rock microstructure, and the pH and chemical composition of the fluid permeating the rock. Results show that the removal of high surface area, mineral phases such as microcrystalline calcite and clay appears to be mostly responsible for dissolution-induced compaction. Nevertheless, it is the original rock microstructure and its response to stress that ultimately defines how solution-transfer and rock compaction feed back upon each other. This work has a dual aim: understanding the mechanisms underlying permanent modifications to the rock microstructure and providing a richer set of experimental information to inform the formulation of new simulations and rock modeling.

Granulite-facies rocks in the Whatley Mill gneiss, Pine Mountain basement massif, Eastern Alabama

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniell, N.; Salpas, P.A.

1993-03-01

The Pine Mountain basement massif is a granulite terrane exposed in a tectonic window through the Inner Piedmont of western Georgia and eastern Alabama. Investigations of the westernmost extent of the massif, the Whatley Mill Gneiss, have revealed four distinct lithologies: (1) an augen gneiss, the type lithology; (2) mylonite that develops in the shear zones cutting the unit; (3) a phaneritic rock showing weak to no foliation; (4) enclaves of biotite gneiss within the weakly-foliated rock. Additionally, the weakly-foliated rock comprises two distinct phases which are in sharp contact along curved and undulating boundaries: phase 1 is a coarser-grainedmore » rock; phase 2 is a finer-grained rock of the same mineralogy as phase 1 except it contains rare hypersthene. This first recorded observation of hypersthene unequivocally confirms the granulite-facies origin of the unit. Major and trace element compositions of the phase 1 rock are identical to those of the augen gneiss. The phase 2 rock, has a distinct composition with higher SiO[sub 2] and lower incompatible trace elements than the phase 1 rock. The enclaves display a range in major elements but higher incompatible elements than the other lithologies. Geochemical and petrologic relationships leads one to interpret: (1) the weakly-foliated rock retains many of its primary igneous features including its two phases and enclaves; (2) the two phases of the weakly-foliated rock arose as a result of injection of one magma (phase 2) into a cooler, crystal mush solidifying from another magma (phase 1); (3) the enclaves represent either autoliths of xenoliths; (4) the augen gneiss arose by isochemical deformation of the phase 1 rock.« less

Lithologies of the basement complex (Devonian and older) in the National Petroleum Reserve - Alaska

USGS Publications Warehouse

Dumoulin, Julie A.; Houseknecht, David W.

2001-01-01

Rocks of the basement complex (Devonian and older) were encountered in at least 30 exploratory wells in the northern part of the NPRA. Fine-grained, variably deformed sedimentary rocks deposited in a slope or basinal setting predominate and include varicolored (mainly red and green) argillite in the Simpson area, dark argillite and chert near Barrow, and widespread gray argillite. Chitinozoans of Middle-Late Ordovician and Silurian age occur in the dark argillite and chert unit. Sponge spicules and radiolarians establish a Phanerozoic age for the varicolored and gray argillite units, both of which contain local interbeds of chert-rich sandstone and silt-stone. Conglomerate and sandstone, also chert-rich but interbedded with mudstone and coal and of Early-Middle Devonian age, occur in the Topagoruk area; these strata formed in a fluvial environment. At East Teshekpuk, granite of probable Devonian age was penetrated. Brecciated, quartz-veined rock of uncertain protolith that may be part of the basement complex was encountered in the Ikpikpuk well. Seismic data indicate that angular unconformities truncate all sedimentary units of the basement complex in NPRA. Rocks correlative in age and lithofacies with the dark argillite and chert unit occur in the subsurface near Prudhoe Bay. Other argillite units in NPRA have similarities to basement rocks in the subsurface adjacent to ANWR and the Ordovician-Silurian Iviagik Group at Cape Lisburne, but lack the interbedded limestones found in the ANWR strata, and are less metamorphosed than, and compositionally distinct from, the Iviagik. The Topagoruk conglomerate and the East Teshekpuk granite resemble the Ulungarat formation and the Okpilak batholith, respectively, in the northeastern Brooks Range.

Devonian and Mississippian rocks of the northern Antelope Range, Eureka County, Nevada

USGS Publications Warehouse

Hose, Richard Kenneth; Armstrong, A.K.; Harris, A.G.; Mamet, B.L.

1982-01-01

Lower through Upper Devonian rocks of the northern Antelope Range, Nev., consist of four formational rank units more than 800 m thick, separated from Mississippian units by an unconformity. The lower three Devonian units, the Beacon Peak Dolomite, McColley Canyon Formation, and Denay Limestone are known in other areas; the top unit, the Fenstermaker Wash Formation, is new. The Mississippian units, more than 280 m thick, are divisible into three units which are unlike coeval units elsewhere, and are herein named the Davis Spring Formation, Kinkead Spring Limestone, and Antelope Range Formation. Systematic sampling of the Devonian sequence has yielded relatively abundant conodonts containing several biostratigraphic ally significant taxa. The Mississippian units contain redeposited conodonts of chiefly Late Devonian and Early Mississippian (Kinderhookian) age together with indigenous Osagean foraminifers and algae in the Kinkead Spring Limestone.

Bioremediation in fractured rock: 2. Mobilization of chloroethene compounds from the rock matrix

USGS Publications Warehouse

Shapiro, Allen M.; Tiedeman, Claire; Imbrigiotta, Thomas; Goode, Daniel J.; Hsieh, Paul A.; Lacombe, Pierre; DeFlaun, Mary F.; Drew, Scott R.; Curtis, Gary P.

2018-01-01

A mass balance is formulated to evaluate the mobilization of chlorinated ethene compounds (CE) from the rock matrix of a fractured mudstone aquifer under pre- and postbioremediation conditions. The analysis relies on a sparse number of monitoring locations and is constrained by a detailed description of the groundwater flow regime. Groundwater flow modeling developed under the site characterization identified groundwater fluxes to formulate the CE mass balance in the rock volume exposed to the injected remediation amendments. Differences in the CE fluxes into and out of the rock volume identify the total CE mobilized from diffusion, desorption, and nonaqueous phase liquid dissolution under pre- and postinjection conditions. The initial CE mass in the rock matrix prior to remediation is estimated using analyses of CE in rock core. The CE mass mobilized per year under preinjection conditions is small relative to the total CE mass in the rock, indicating that current pump-and-treat and natural attenuation conditions are likely to require hundreds of years to achieve groundwater concentrations that meet regulatory guidelines. The postinjection CE mobilization rate increased by approximately an order of magnitude over the 5 years of monitoring after the amendment injection. This rate is likely to decrease and additional remediation applications over several decades would still be needed to reduce CE mass in the rock matrix to levels where groundwater concentrations in fractures achieve regulatory standards.

Experimental Studies on Permeability of Intact and Singly Jointed Meta-Sedimentary Rocks Under Confining Pressure

NASA Astrophysics Data System (ADS)

Wong, Louis Ngai Yuen; Li, Diyuan; Liu, Gang

2013-01-01

Three different types of permeability tests were conducted on 23 intact and singly jointed rock specimens, which were cored from rock blocks collected from a rock cavern under construction in Singapore. The studied rock types belong to inter-bedded meta-sandstone and meta-siltstone with very low porosity and high uniaxial compressive strength. The transient pulse water flow method was employed to measure the permeability of intact meta-sandstone under a confining pressure up to 30 MPa. It showed that the magnitude order of meta-sandstone's intrinsic permeability is about 10-18 m2. The steady-state gas flow method was used to measure the permeability of both intact meta-siltstone and meta-sandstone in a triaxial cell under different confining pressures spanning from 2.5 to 10 MPa. The measured permeability of both rock types ranged from 10-21 to 10-20 m2. The influence of a single natural joint on the permeability of both rock types was studied by using the steady-state water flow method under different confining pressures spanning from 1.25 to 5.0 MPa, including loading and unloading phases. The measured permeability of both jointed rocks ranged from 10-13 to 10-11 m2, where the permeability of jointed meta-siltstone was usually slightly lower than that of jointed meta-sandstone. The permeability of jointed rocks decreases with increasing confining pressure, which can be well fitted by an empirical power law relationship between the permeability and confining pressure or effective pressure. The permeability of partly open cracked specimens is lower than that of open cracked specimens, but it is higher than that of the specimen with a dominant vein for the meta-sandstone under the same confining pressure. The permeability of open cracked rock specimens will partially recover during the unloading confining pressure process. The equivalent crack (joint) aperture is as narrow as a magnitude order of 10-6 m (1 μm) in the rock specimens under confining pressures spanning from 1.25 to 5.0 MPa, which represent the typical ground stress conditions in the cavern. The in situ hydraulic conductivity measurements conducted in six boreholes by the injection test showed that the in situ permeability of rock mass varies between 10-18 and 10-11 m2. The lower bound of the in situ permeability is larger than that of the present laboratory-tested intact rock specimens, while the upper bound of the in situ permeability is less than that of the present laboratory-tested jointed rock specimens. The in situ permeability test results were thus compatible with our present laboratory permeability results of both intact and jointed rock specimens.

Accelerated weathering of carbonate rocks following the 2010 forest wildfire on Mt. Carmel, Israel

NASA Astrophysics Data System (ADS)

Shtober-Zisu, Nurit; Tessler, Naama; Tsatskin, Alexander; Greenbaum, Noam

2015-04-01

Massive destruction of carbonate rocks occurred on the slopes of Mt. Carmel, during the severe forest fire in 2010. The bedrock surfaces exhibited extensive exfoliation into flakes and spalls covering up to 80%-100% of the exposed rocks; detached boulders were totally fractured or disintegrated. The fire affected six carbonate units -- various types of chalk, limestone, and dolomite. The burned flakes show a consistent tendency towards flatness, in all lithologies, as 85%-95% of the flakes were detached in the form of blades, plates, and slabs. The effects of the fire depend to a large extent on the rocks' physical properties and vary with lithology: the most severe response was found in the chalk formations which are covered by calcrete (Nari crusts). These rocks reacted by extreme exfoliation, at an average depth of 7.7 to 9.6 cm and a maximum depth of 20 cm. The flakes formed in chalk were thicker, longer, and wider than those of limestone or dolomite formations. Moreover, the chalk outcrops were exfoliated in a laminar structure, one above the other, to a depth of 10 cm and more. Their shape also tended to be blockier or rod-like. In contrast, the limestone flakes were the thinnest, with 99% of them shaped like blades and plates. Scorched and blackened faces under the upper layer of spalls provided strong evidence that chalk breakdown took place at an early stage of the fire. The extreme response of the chalks can be explained by the laminar structure of the Nari, which served as planes of weakness for the rock destruction. Three years after the fire, the rocks continue to exfoliate and break down internally. As the harder surface of the Nari was removed, the more brittle underlying chalk is exposed to erosion. If fires can obliterate boulders in a single wildfire event, it follows that wildfires may serve as limiting agents in the geomorphic evolution of slopes. However, it is difficult to estimate the frequency of high-intensity fires in the Carmel region over the past 2-3 million years. It is even harder to assess the frequency of fires (and the destruction) of a single rock outcrop. Our findings show that rock outcrop may lose even 20 cm of its thickness in a single fire. This value, if accounted to the long run, can be responsible for a high percentage of the total denudation rate and therefore, in the mountainous carbonate slopes of the Mediterranean region, wildland fires may serve as extremely important factors in landscape evolution.

Alaska geology revealed

USGS Publications Warehouse

Wilson, Frederic H.; Labay, Keith A.

2016-11-09

This map shows the generalized geology of Alaska, which helps us to understand where potential mineral deposits and energy resources might be found, define ecosystems, and ultimately, teach us about the earth history of the State. Rock units are grouped in very broad categories on the basis of age and general rock type. A much more detailed and fully referenced presentation of the geology of Alaska is available in the Geologic Map of Alaska (http://dx.doi.org/10.3133/sim3340). This product represents the simplification of thousands of individual rock units into just 39 broad groups. Even with this generalization, the sheer complexity of Alaskan geology remains evident.

The United States Polar Rock Repository: A geological resource for the Earth science community

USGS Publications Warehouse

Grunow, Annie M.; Elliot, David H.; Codispoti, Julie E.

2007-01-01

The United States Polar Rock Repository (USPRR) is a U. S. national facility designed for the permanent curatorial preservation of rock samples, along with associated materials such as field notes, annotated air photos and maps, raw analytic data, paleomagnetic cores, ground rock and mineral residues, thin sections, and microfossil mounts, microslides and residues from Polar areas. This facility was established by the Office of Polar Programs at the U. S. National Science Foundation (NSF) to minimize redundant sample collecting, and also because the extreme cold and hazardous field conditions make fieldwork costly and difficult. The repository provides, along with an on-line database of sample information, an essential resource for proposal preparation, pilot studies and other sample based research that should make fieldwork more efficient and effective. This latter aspect should reduce the environmental impact of conducting research in sensitive Polar Regions. The USPRR also provides samples for educational outreach. Rock samples may be borrowed for research or educational purposes as well as for museum exhibits.

The subsurface geology of the Florida-Hatteras shelf, slope, and inner Blake Plateau

USGS Publications Warehouse

Paull, Charles K.; Dillon, William P.

1979-01-01

The structure and stratigraphy of the Florida-Hatteras Slope and inner Blake Plateau was studied by means of 4,780 km of single-channel air gun seismic reflection profiles. Control for the seismic stratigraphy is provided by correlating reflecting units and paleontologically dated stratigraphic units identified in offshore wells and dredge hauls. Many Tertiary unconformities exist, and major regional unconformities at the end of the Oligocene and in the late Paleocene are mapped. Reflecting surfaces believed to represent the tops of the Cretaceous, Paleocene, and Oligocene extend throughout the region. Upper Cretaceous (pre-Maastrichtian) rocks on the southeastern side of the Carolina Platform form a large seaward-facing progradational wedge. The Upper Cretaceous rocks in the Southeast Georgia Embayment, are seismically transparent and on the inner Blake Plateau are cut by numerous small faults, perhaps due to compaction. Within the survey area relatively flat-lying Maastrichtian and Paleocene strata show no evidence that a feature similar to the present Florida-Hatteras Slope existed at the beginning of the Tertiary. Late Paleocene erosion, related to the initiation of the Gulf Stream flow, probably developed this regional unconformity. Eocene and Oligocene sediments landward of the present Gulf Stream form a thick sequence of seaward-dipping progradational beds. A seaward progradational wedge of Miocene to Holocene age covers a regionally traceable unconformity, which separates the Oligocene from the Miocene sediments. Under and seaward of the present Gulf Stream, the Eocene and younger sediment supply was much smaller and the buildup is comparatively insignificant. The difference in accumulation rates in the Eocene and younger sediments, landward and seaward of the Gulf Stream, is responsible for the Florida-Hatteras Slope. Tertiary isopach maps suggest that there is a well developed triangular depocenter under the shelf. The edges of the depocenter correspond with magnetic anomalies and it is suggested that the depocenter is related to differential subsidence during the Tertiary across older crustal structures. The Eocene and Oligocene units contain the aquifer onshore, and the aquifer probably remains in these units offshore. With this assumption the potential aquifer has been identified and traced under the shelf and slope.

Ore-forming adakitic porphyry produced by fractional crystallization of oxidized basaltic magmas in a subcrustal chamber (Jiamate, East Junggar, NW China)

NASA Astrophysics Data System (ADS)

Hong, Tao; Xu, Xing-Wang; Gao, Jun; Peters, Stephen G.; Zhang, Di; Jielili, Reyaniguli; Xiang, Peng; Li, Hao; Wu, Chu; You, Jun; Liu, Jie; Ke, Qiang

2018-01-01

Adakitic intrusions are supposed to have a close genetic and spatial relationship to porphyry Cu deposits. However, the genesis of adakitic intrusions is still under dispute. Here, we describe newly discovered intrusive complex rocks, which are composed of ore-bearing, layered magnetite-bearing gabbroic and adakitic rocks in Jiamate, East Junggar, NW China. These Jiamate Complex intrusions have diagnostic petrologic, geochronologic and geochemical signatures that indicate they were all generated from the same oxidized precursor magma source. Additionally, these layered rocks underwent the same fractional crystallization process as the ore-bearing adakitic rocks in the adjacent Kalaxiangar Porphyry Cu Belt (KPCB) in an oceanic island arc (OIA) setting. The rocks studied for this paper include layered magnetite-bearing gabbroic intrusive rocks that contain: (1) gradual contact changes between lithological units of mafic and intermediate rocks, (2) geochemical signatures that are the same as those found in oceanic island arc (OIA) rocks, (3) typical adakitic geochemistry, and (4) similar characteristics and apparent fractional crystallization relationships of ultra-basic to basic rocks to those in the nearby Beitashan Formation and to ore-bearing adakitic rocks in the KPCB. They also display similar zircon U-Pb and zircon Hf model ages. The Jiamate Complex intrusions contain intergrowths of magnetite and layered gabbro, and the intermediate-acidic intrusions of the Complex display typical adakitic affinities. Moreover, in conjunction with previously published geochronological and geochemistry data of the mafic rocks in the Beitashan Formation and in the KPCB area, additional data generated for the Jiamate Complex intrusions rocks indicate that they were formed from fractional crystallization processes. The Jiamate Complex intrusions most likely were derived from a metasomatized mantle wedge that was underplated at the root of the Saur oceanic island arc (Saur OIA). The ore-bearing adakitic intrusions in the KPCB and the adakitic Jiamate Complex intrusions were both probably generated from the same basaltic parental magmas through fractional crystallization. In addition, characteristics of the layered, magnetite-bearing, oxidized, basaltic Jiamate Complex intrusive rocks indicate that they are likely to be the parental arc magmas for the nearby porphyry Cu deposits. This conclusion is based on new interpretations of the regional and local geology, on interpretation of new geochemical analysis, new stable isotope analysis, new geothermobarometry, and new zircon age dating as well as other techniques and interpretations.

Ore-forming adakitic porphyry produced by fractional crystallization of oxidized basaltic magmas in a subcrustal chamber (Jiamate, East Junggar, NW China)

USGS Publications Warehouse

Hong, Tao; Xu, Xing-Wang; Gao, Jun; Peters, Stephen; Zhang, Di; Jielili, Reyaniguli; Xiang, Peng; Li, Hao; Wu, Chu; You, Jun; Liu, Jie; Ke, Qiang

2018-01-01

Adakitic intrusions are supposed to have a close genetic and spatial relationship to porphyry Cu deposits. However, the genesis of adakitic intrusions is still under dispute. Here, we describe newly discovered intrusive complex rocks, which are composed of ore-bearing, layered magnetite-bearing gabbroic and adakitic rocks in Jiamate, East Junggar, NW China. These Jiamate Complex intrusions have diagnostic petrologic, geochronologic and geochemical signatures that indicate they were all generated from the same oxidized precursor magma source. Additionally, these layered rocks underwent the same fractional crystallization process as the ore-bearing adakitic rocks in the adjacent Kalaxiangar Porphyry Cu Belt (KPCB) in an oceanic island arc (OIA) setting. The rocks studied for this paper include layered magnetite-bearing gabbroic intrusive rocks that contain: (1) gradual contact changes between lithological units of mafic and intermediate rocks, (2) geochemical signatures that are the same as those found in oceanic island arc (OIA) rocks, (3) typical adakitic geochemistry, and (4) similar characteristics and apparent fractional crystallization relationships of ultra-basic to basic rocks to those in the nearby Beitashan Formation and to ore-bearing adakitic rocks in the KPCB. They also display similar zircon U-Pb and zircon Hf model ages.The Jiamate Complex intrusions contain intergrowths of magnetite and layered gabbro, and the intermediate-acidic intrusions of the Complex display typical adakitic affinities. Moreover, in conjunction with previously published geochronological and geochemistry data of the mafic rocks in the Beitashan Formation and in the KPCB area, additional data generated for the Jiamate Complex intrusions rocks indicate that they were formed from fractional crystallization processes. The Jiamate Complex intrusions most likely were derived from a metasomatized mantle wedge that was underplated at the root of the Saur oceanic island arc (Saur OIA). The ore-bearing adakitic intrusions in the KPCB and the adakitic Jiamate Complex intrusions were both probably generated from the same basaltic parental magmas through fractional crystallization. In addition, characteristics of the layered, magnetite-bearing, oxidized, basaltic Jiamate Complex intrusive rocks indicate that they are likely to be the parental arc magmas for the nearby porphyry Cu deposits. This conclusion is based on new interpretations of the regional and local geology, on interpretation of new geochemical analysis, new stable isotope analysis, new geothermobarometry, and new zircon age dating as well as other techniques and interpretations.

Carbonate rocks of Cambrian and Ordovician age in the Lancaster quadrangle, Pennsylvania

USGS Publications Warehouse

Meisler, Harold; Becher, Albert E.

1968-01-01

Detailed mapping has shown that the carbonate rocks of Cambrian and Ordovician age in the Lancaster quadrangle, Pennsylvania, can be divided into 14 rock-stratigraphic units. These units are defined primarily by their relative proportions of limestone and dolomite. The oldest units, the Vintage, Kinzers, and Ledger Formations of Cambrian age, and the Conestoga Limestone of Ordovician age are retained in this report. The Zooks Corner Formation, of Cambrian age, a dolomite unit overlying the Ledger Dolomite, is named here for exposures along Conestoga Creek near the village of Zooks Corner. The Conococheague (Cambrian) and Beekmantown (Ordovician) Limestones, as mapped by earlier workers, have been elevated to group rank and subdivided into formations that are correlated with and named for geologic units in Lebanon and Berks Counties, Pa. These formations, from oldest to youngest, are the Buffalo Springs, Snitz Creek, Millbach, and Richland Formations of the Conococheague Group, and the Stonehenge, Bpler, and Ontelaunee Formations of the Beekmantown Group. The Annville and Myerstown Limestones, which are named for lithologically similar units in Dauphin and Lebanon Counties, Pa., overlie the Beekmantown Group in one small area in the quadrangle.

Geochemistry of volcanic rocks from the Wawa greenstone belt

NASA Technical Reports Server (NTRS)

Schulz, K. J.; Sylvester, P. J.; Attoh, K.

1983-01-01

The Wawa greenstone belt is located in the District of Algoma and extends east-northeast from Lake Superior to the western part of the Sudbury District in Ontario, Canada. Recent mapping by Attoh has shown that an unconformity at the base of the Dore' Formation and equivalent sedimentary rocks marks a significant stratigraphic break which can be traced throughout the volcanic belt. This break has been used to subdivide the volcanic-sedimentary into pre- and post-Dore' sequences. The pre-Dore' sequence includes at least two cycles of mafic-to-felsic volcanism, each capped by an iron-formation unit. The post-Dore' sequence includes an older mafic-to-felsic unit, which directly overlies sedimentary rocks correlated with the Dore' Formation, and a younger felsic breccia unit interpreted to have formed as debris flows from a felsic volcanic center. In the present study, samples of both the pre-and post-Dore' volcanic sequences were analyzed for major and trace elements, incuding rare earths (REE). This preliminary study is part of an ongoing program to assess the petrogenesis of the volcanic rocks of the Wawa greenstone belt.

4. General view of the N elevation, showing the rear ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. General view of the N elevation, showing the rear of the main block and the courtyard between the E & W wings; looking S. Note structure 73, an air-conditioning unit, in the end of the courtyard. (Ceronie) - Rock Island Arsenal, Building No. 62, Rodman Avenue between First & Second Streets, Rock Island, Rock Island County, IL

Biostratigraphy and structure of paleozoic host rocks and their relationship to Carlin-type gold deposits in the Jerritt Canyon mining district, Nevada

USGS Publications Warehouse

Peters, S.G.; Armstrong, A.K.; Harris, A.G.; Oscarson, R.L.; Noble, P.J.

2003-01-01

The Jerritt Canyon mining district in the northern Independence Range, northern Nevada, contains multiple, nearly horizontal, thrust masses of platform carbonate rocks that are exposed in a series of north- to northeast-elongated, tectonic windows through rocks of the Roberts Mountains allochthon. The Roberts Mountains allochthon was emplaced during the Late Devonian to Early Mississippian Antler orogeny. These thrust masses contain structurally and stratigraphically controlled Carlin-type gold deposits. The gold deposits are hosted in tectonically truncated units of the Silurian to Devonian Hanson Creek and Roberts Mountains Formations that lie within structural slices of an Eastern assemblage of Cambrian to Devonian carbonate rocks. In addition, these multiply thrust-faulted and folded host rocks are structurally interleaved with Mississippian siliciclastic rocks and are overlain structurally by Cambrian to Devonian siliciclastic units of the Roberts Mountains allochthon. All sedimentary rocks were involved in thrusting, high-angle faulting, and folding, and some of these events indicate substantial late Paleozoic and/or Mesozoic regional shortening. Early Pennsylvanian and late Eocene dikes also intrude the sedimentary rocks. These rocks all were uplifted into a northeast-trending range by subsequent late Cenozoic Basin and Range faulting. Eocene sedimentary and volcanic rocks flank part of the range. Pathways of hydrothermal fluid flow and locations of Carlin-type gold orebodies in the Jerritt Canyon mining district were controlled by structural and host-rock geometries within specific lithologies of the stacked thrust masses of Eastern assemblage rocks. The gold deposits are most common proximal to intersections of northeast-striking faults, northwest-striking dikes, and thrust planes that lie adjacent to permeable stratigraphic horizons. The host stratigraphic units include carbonate sequences that contained primary intercrystalline permeability, which provided initial pathways for fluid flow and later served as precipitation sites for ore minerals. Alteration, during, and perhaps prior to mineralization, enhanced primary permeability by dissolution, by removal of calcite, and by formation of dolomite. Ore-stage sulfide minerals and alteration minerals commonly precipitated in pore spaces among dolomite grains. Microveinlets and microbrecciation in zones of intense alteration also provided networks of secondary permeability that further enhanced fluid flux and produced additional sites for ore deposition.

Transfer of Metasupracrustal Rocks to Midcrustal Depths in the North Cascades Continental Magmatic Arc, Skagit Gneiss Complex, Washington

NASA Astrophysics Data System (ADS)

Sauer, K. B.; Gordon, S. M.; Miller, R. B.; Vervoort, J. D.; Fisher, C. M.

2017-12-01

The metasupracrustal units within the north central Chelan block of the North Cascades Range, Washington, are investigated to determine mechanisms and timescales of supracrustal rock incorporation into the deep crust of continental magmatic arcs. Zircon U-Pb and Hf-isotope analyses were used to characterize the protoliths of metasedimentary and metaigneous rocks from the Skagit Gneiss Complex, metasupracrustal rocks from the Cascade River Schist, and metavolcanic rocks from the Napeequa Schist. Skagit Gneiss Complex metasedimentary rocks have (1) a wide range of zircon U-Pb dates from Proterozoic to latest Cretaceous and (2) a more limited range of dates, from Late Triassic to latest Cretaceous, and a lack of Proterozoic dates. Two samples from the Cascade River Schist are characterized by Late Cretaceous protoliths. Amphibolites from the Napeequa Schist have Late Triassic protoliths. Similarities between the Skagit Gneiss metasediments and accretionary wedge and forearc sediments in northwestern Washington and Southern California indicate that the protolith for these units was likely deposited in a forearc basin and/or accretionary wedge in the Early to Late Cretaceous (circa 134-79 Ma). Sediment was likely underthrust into the active arc by circa 74-65 Ma, as soon as 7 Ma after deposition, and intruded by voluminous magmas. The incorporation of metasupracrustal units aligns with the timing of major arc magmatism in the North Cascades (circa 79-60 Ma) and may indicate a link between the burial of sediments and pluton emplacement.

Provenance analysis on detrital zircons from the back-arc Arivechi basin: Implications for the Upper Cretaceous tectonic evolution of northern Sonora and southern Arizona

NASA Astrophysics Data System (ADS)

Rodríguez-Castañeda, José Luis; Ortega-Rivera, Amabel; Roldán-Quintana, Jaime; Espinoza-Maldonado, Inocente Guadalupe

2018-07-01

In the Arivechi region of eastern Sonora, northwestern Mexico, mountainous exposures of Upper Cretaceous rocks that contain monoliths within coarse sedimentary debris are enigmatic, in a province of largely Late Cretaceous continental-margin arc rocks. The rocks sequence in the study area are grouped in two Upper Cretaceous units: the lower Cañada de Tarachi and the younger El Potrero Grande. Detrital zircons collected from three samples of the Cañada de Tarachi and El Potrero Grande units have been analyzed for U-Pb ages to constrain their provenance. These ages constrain the age of the exposed rocks and provide new insights into the geological evolution of eastern Sonora Cretaceous rocks. The detrital zircon age populations determined for the Cañada de Tarachi and El Potrero Grande units contain distinctive Precambrian, Paleozoic, and Mesozoic zircon ages that provide probable source areas which are discussed in detail constraining the tectonic evolution of the region. Comparison of these knew ages with published data suggests that the source terranes, that supplied zircons to the Arivechi basin, correlate with Proterozoic, Paleozoic and Mesozoic domains in southern California and Baja California, northern Sonora, southern Arizona and eastern Chihuahua. The provenance variation is vital to constrain the source of the Cretaceous rocks in eastern Sonora and support a better understanding of the Permo-Triassic Cordilleran Magmatic Arc in the southwestern North America.

Dynamic response analysis of surrounding rock under the continuous blasting seismic wave

NASA Astrophysics Data System (ADS)

Gao, P. F.; Zong, Q.; Xu, Y.; Fu, J.

2017-10-01

The blasting vibration that is caused by blasting excavation will generate a certain degree of negative effect on the stability of surrounding rock in underground engineering. A dynamic response analysis of surrounding rock under the continuous blasting seismic wave is carried out to optimize blasting parameters and guide underground engineering construction. Based on the theory of wavelet analysis, the reconstructed signals of each layer of different frequency bands are obtained by db8 wavelet decomposition. The difference of dynamic response of the continuous blasting seismic wave at a certain point caused by different blasting sources is discussed. The signal in the frequency band of natural frequency of the surrounding rock shows a certain degree of amplification effect deduced from the dynamic response characteristics of the surrounding rock under the influence of continuous blasting seismic wave. Continuous blasting operations in a fixed space will lead to the change of internal structure of the surrounding rock. It may result in the decline of natural frequency of the whole surrounding rock and it is also harmful for the stability of the surrounding rock.

Two flysch belts having distinctly different provenance suggest no stratigraphic link between the Wrangellia composite terrane and the paleo-Alaskan margin

USGS Publications Warehouse

Hults, Chad P.; Wilson, Frederic H.; Donelick, Raymond A.; O'Sullivan, Paul B.

2013-01-01

The provenance of Jurassic to Cretaceous flysch along the northern boundary of the allochthonous Wrangellia composite terrane, exposed from the Lake Clark region of southwest Alaska to the Nutzotin Mountains in eastern Alaska, suggests that the flysch can be divided into two belts having different sources. On the north, the Kahiltna flysch and Kuskokwim Group overlie and were derived from the Farwell and Yukon-Tanana terranes, as well as smaller related terranes that were part of the paleo-Alaskan margin. Paleocurrent indicators for these two units suggest that they derived sediment from the north and west. Sandstones are predominantly lithic wacke that contain abundant quartz grains, lithic rock fragments, and detrital mica, which suggest that these rocks were derived from recycled orogen and arc sources. Conglomerates contain limestone clasts that have fossils matching terranes that made up the paleo-Alaskan margin. In contrast, flysch units on the south overlie and were derived from the Wrangellia composite terrane. Paleocurrent indicators for these units suggest that they derived sediment from the south. Sandstones are predominantly feldspathic wackes that contain abundant plagioclase grains and volcanic rock fragments, which suggest these rocks were derived from an arc. Clast compositions in conglomerate south of the boundary match rock types of the Wrangellia composite terrane. The distributions of detrital zircon ages also differentiate the flysch units. Flysch units on the north average 54% Mesozoic, 14% Paleozoic, and 32% Precambrian detrital zircons, reflecting derivation from the older Yukon-Tanana, Farewell, and other terranes that made up the paleo-Alaskan margin. In comparison, flysch units on the south average 94% Mesozoic, 1% Paleozoic, and 5% Precambrian zircons, which are consistent with derivation from the Mesozoic oceanic magmatic arc rocks in the Wrangellia composite terrane. In particular, the flysch units on the south contain a large proportion of zircons ranging from 135 to 175 Ma, corresponding to the age of the Chitina magmatic arc in the Wrangellia terrane and the plutons of the Peninsular terrane, which are part of the Wrangellia composite terrane. Flysch units on the north do not contain significant numbers of zircons in this age range. The flysch overlying the Wrangellia composite terrane apparently does not contain detritus derived from rocks of the paleo-Alaska margin, and the flysch overlying the paleo-Alaskan margin apparently does not contain detritus derived from the Wrangellia composite terrane. The provenance difference between the two belts helps to constrain the location of the northern boundary of the Wrangellia composite terrane. Geophysical models place a deep, through-going, crustal-scale suture zone in the area between the two flysch belts. The difference in the provenance of the two belts supports this interpretation. The youngest flysch is Late Cretaceous in age, and structural disruption of the flysch units is constrained to the Late Cretaceous, so it appears that the Wrangellia composite terrane was not near the paleo-Alaskan margin until the Late Cretaceous.

Geochemical characteristics of igneous rocks associated with epithermal mineral deposits—A review

USGS Publications Warehouse

du Bray, Edward A.

2017-01-01

Newly synthesized data indicate that the geochemistry of igneous rocks associated with epithermal mineral deposits varies extensively and continuously from subalkaline basaltic to rhyolitic compositions. Trace element and isotopic data for these rocks are consistent with subduction-related magmatism and suggest that the primary source magmas were generated by partial melting of the mantle-wedge above subducting oceanic slabs. Broad geochemical and petrographic diversity of individual igneous rock units associated with epithermal deposits indicate that the associated magmas evolved by open-system processes. Following migration to shallow crustal reservoirs, these magmas evolved by assimilation, recharge, and partial homogenization; these processes contribute to arc magmatism worldwide.Although epithermal deposits with the largest Au and Ag production are associated with felsic to intermediate composition igneous rocks, demonstrable relationships between magmas having any particular composition and epithermal deposit genesis are completely absent because the composition of igneous rock units associated with epithermal deposits ranges from basalt to rhyolite. Consequently, igneous rock compositions do not constitute effective exploration criteria with respect to identification of terranes prospective for epithermal deposit formation. However, the close spatial and temporal association of igneous rocks and epithermal deposits does suggest a mutual genetic relationship. Igneous systems likely contribute heat and some of the fluids and metals involved in epithermal deposit formation. Accordingly, deposit formation requires optimization of source metal contents, appropriate fluid compositions and characteristics, structural features conducive to hydrothermal fluid flow and confinement, and receptive host rocks, but not magmas with special compositional characteristics.

Reconnaissance geology of the Ghazzalah Quadrangle, sheet 26/41 A, Kingdom of Saudi Arabia

USGS Publications Warehouse

Quick, James E.

1983-01-01

The Ghazzalah quadrangle is located in the northern Precambrian shield of Saudi Arabia between lat 26?30' and 27?00' N. and long 41?00' and 41?30' E. The area is underlain by two lithologically distinct, Precambrian volcanosedimentary units and a wide range of dioritoid and granitoid plutonic intrusive rocks. The only Phanerozoic rocks consist of one outcrop of Tertiary(?) basalt and widespread but thin deposits of Quaternary detritus. The Banana greenstone, the oldest rock in the quadrangle, consists of intermediate volcanic and subvolcanic rocks and minor interbedded marble, which have been metamorphosed to greenschist-facies assemblages. Volcanic rocks mainly range in composition from basalt to andesite, and subvolcanic rocks consist of diorite and diabase. The Banana greenstone is unconformably overlain by silicic volcanic rocks and minor arkosic sandstone and breccia of the Hadn formation. Preservation of delicate volcanic textures suggests that the rocks have been only incipiently metamorphosed. Unpublished rubidium/strontium isotopic data for the Hadn formation suggest an age of 620 to 610 Ma. Intrusive rocks are separable according to their ages relative to the Hadn formation. Those that are unconformably overlain by the Hadn formation consist of hornblende quartz diorite and gabbro, which may be consanguineous with the Banana greenstone, and younger tonalite, biotite-hornblende granodiorite, syenogranite, and monzogranite. Plutons of monzogranite, alkali-feldspar g,ranite, syenbgranite, peralkaline granite, and hypabyssal intrusions of granophyre were probably emplaced during a period coincident with and (or) following Hadn volcanism. Uranium-lead and rubidium/strontium isotopic data for two plutons in the adjacent Al Qasr quadrangle suggest that plutonic activity persisted in the region until about 580 to 570 Ma. Faulting appears to postdate all of the plutonic rocks. The dominant faults belong to a northeast-trending system of right-lateral shears; a subordinant system consists of mainly north- to northwest-trending faults. The peralkaline-granite plutons underlying Jibal Ba'gham and Jibal ar Rumman have the most economic potential. Wadi samples from these areas show an anomalous concentrations of tin, lead, niobium, and yttrium. Localized, intense radiometric anomalies in the Ba'gham intrusive complex are associated with high concentrations )f thorium, uranium, andrare-earth elements.

Geology of the ultrabasic to basic Uitkomst complex, eastern Transvaal, South Africa: an overview

NASA Astrophysics Data System (ADS)

Gauert, C. D. K.; De Waal, S. A.; Wallmach, T.

1995-11-01

The Uitkomst complex in eastern Transvaal, South Africa, is a mineralized, layered ultrabasic to basic intrusion of Bushveld complex age (2.05-2.06 Ga) that intruded into the sedimentary rocks of the Lower Transvaal Supergroup. The complex is situated 20 km north of Badplaas. It is elongated in a northwesterly direction and is exposed over a total distance of 9 km. The intrusion is interpreted to have an anvil-shaped cross-section with a true thickness of approximately 800 m and is enveloped by metamorphosed and, in places, brecciated country rocks. Post-Bushveld diabase intrusions caused considerable vertical dilation of teh complex. The complex consists of six lithological units (from bottom to top): Basal Gabbro, Lower Harzburgite, Chromitiferous Harzburgite, Main Harzburgite, Pyroxenite and Gabbronorite. The Basal Gabbro Unit, developed at the base of the intrusion and showing a narrow chilled margin of 0.2 to 1.5 m against the floor rocks, has an average thickness of 6 m and grades upwards into the sulphide-rich and xenolith-bearing sequence of the Lower Harzburgite Unit. The latter unit averages 50 m in thickness and is gradationally overlain by the chromite-rich harzburgite of the Chromitiferous Harzburgite Unit (average thickness 60 m). Following on from the Chromitiferous Harzburgite Unit is the 330 m thick Main Harzburgite Unit. The Pyroxenite and Gabbronorite Units (total combined thickness of 310 m) form the uppermost formations of the intrusion. The three lower lithological units, Basal Gabbro to Chromitiferous Harzburgite, are highly altered by late magmatic, hydrothermal processes causing widespread serpentinization, steatitization, saussuritization and uralitization. Field relations, petrography and mineral and whole rock chemistry suggest the following sequence of events, The original emplacement of magma took place from northwest to southeast. The intrusion was bounded between two major fracture zones that gave rise to an elongated body, which acted as a conduit for later magma heaves. The first magma pulses, forming the chilled margin of the intrusion, show chemical affinities to a micropyroxenite described from the Bushveld complex. The Lower Harzburgite and Chromitiferous Harzburgite Units, judged from the abundance of xenoliths, originated by crystal settling from a contaminated basic magma. The Main Harzburgite crystallized from a magma of constant, probably also basic, composition, which flowed through the conduit after formation of the lower three lithological units. At a late stage of emplacement, after replenishment in the conduit came to a standstill, closed system conditions developed in the upper part of the complex, resulting in a magma fractionation trend of increasing incompatible elements contents towards the top of the intrusion. The mineralization in the lower three rock units and at the base was most probably caused by a segregating sulphide liquid forced to precipitate by the oxidative degassing of dolomite. Sulphur isotope ratios indicate various degrees of contamination of the magma by the enveloping sedimentary rocks, which provided the necessary amounts of S to reach S saturation.

Inclination shallowing in Eocene Linzizong sedimentary rocks from Southern Tibet: correction, possible causes and implications for reconstructing the India-Asia collision

NASA Astrophysics Data System (ADS)

Huang, Wentao; Dupont-Nivet, Guillaume; Lippert, Peter C.; van Hinsbergen, Douwe J. J.; Hallot, Erwan

2013-09-01

A systematic bias towards low palaeomagnetic inclination recorded in clastic sediments, that is, inclination shallowing, has been recognized and studied for decades. Identification, understanding and correction of this inclination shallowing are critical for palaeogeographic reconstructions, particularly those used in climate models and to date collisional events in convergent orogenic systems, such as those surrounding the Neotethys. Here we report palaeomagnetic inclinations from the sedimentary Eocene upper Linzizong Group of Southern Tibet that are ˜20° lower than conformable underlying volcanic units. At face value, the palaeomagnetic results from these sedimentary rocks suggest the southern margin of Asia was located ˜10°N, which is inconsistent with recent reviews of the palaeolatitude of Southern Tibet. We apply two different correction methods to estimate the magnitude of inclination shallowing independently from the volcanics. The mean inclination is corrected from 20.5° to 40.0° within 95 per cent confidence limits between 33.1° and 49.5° by the elongation/inclination (E/I) correction method; an anisotropy-based inclination correction method steepens the mean inclination to 41.3 ± 3.3° after a curve fitting- determined particle anisotropy of 1.39 is applied. These corrected inclinations are statistically indistinguishable from the well-determined 40.3 ± 4.5º mean inclination of the underlying volcanic rocks that provides an independent check on the validity of these correction methods. Our results show that inclination shallowing in sedimentary rocks can be corrected. Careful inspection of stratigraphic variations of rock magnetic properties and remanence anisotropy suggests shallowing was caused mainly by a combination of syn- and post-depositional processes such as particle imbrication and sedimentary compaction that vary in importance throughout the section. Palaeolatitudes calculated from palaeomagnetic directions from Eocene sedimentary rocks of the upper Linzizong Group that have corrected for inclination shallowing are consistent with palaeolatitude history of the Lhasa terrane, and suggest that the India-Asia collision began at ˜20°N by 45-55 Ma.

Exploration of the enhanced geothermal system (EGS) potential of crystalline rocks for district heating (Elbe Zone, Saxony, Germany)

NASA Astrophysics Data System (ADS)

Förster, Andrea; Förster, Hans-Jürgen; Krentz, Ottomar

2018-01-01

This paper addresses aspects of a baseline geothermal exploration of the thermally quiescent Elbe Zone (hosting the cities of Meissen and Dresden) for a potential deployment of geothermal heat in municipal heating systems. Low-permeable to impermeable igneous and metamorphic rocks constitute the major rock types at depth, implying that an enhanced geothermal system needs to be developed by creating artificial flow paths for fluids to enhance the heat extraction from the subsurface. The study includes the development of geological models for two areas on the basis of which temperature models are generated at upper crustal scale. The models are parameterized with laboratory-measured rock thermal properties (thermal conductivity k, radiogenic heat production H). The uncertainties of modelled temperature caused by observed variations of k and H and inferred mantle heat flow are assessed. The study delineates highest temperatures within the intermediate (monzonite/syenite unit) and mafic rocks (diorite/monzodiorite unit) forming the deeper portions of the Meissen Massif and, specifically for the Dresden area, also within the low-metamorphic rocks (slates/phyllites/quartzites) of the Elbtalschiefergebirge. Boreholes 3-4 km deep need to be drilled to reach the envisioned economically favourable temperatures of 120 °C. The metamorphic and mafic rocks exhibit low concentrations of U and Th, thus being advantageous for a geothermal use. For the monzonite/syenite unit of high heat production ( 6 µW m-3) in the Meissen Massif, the mobilization of Th and U into the geothermal working fluid is assumed to be minor, although their various radioactive decay products will be omnipresent during geothermal use.

Silica-undersaturated reaction zones at a crust-mantle interface in the Highland Complex, Sri Lanka: Mass transfer and melt infiltration during high-temperature metasomatism

NASA Astrophysics Data System (ADS)

Fernando, G. W. A. R.; Dharmapriya, P. L.; Baumgartner, Lukas P.

2017-07-01

Sri Lanka is a crucial Gondwana fragment mostly composed of granulitic rocks in the Highland Complex surrounded by rocks with granulite to amphibolite grade in the Vijayan and Wanni Complex that were structurally juxtaposed during Pan-African orogeny. Fluids associated with granulite-facies metamorphism are thought to have controlled various lower crustal processes such as dehydration/hydration reactions, partial melting, and high-temperature metasomatism. Chemical disequilibrium in the hybrid contact zone between a near peak post-tectonic ultramafic enclave and siliceous granulitic gneiss at Rupaha within the Highland Complex produced metasomatic reaction zones under the presence of melt. Different reaction zones observed in the contact zone show the mineral assemblages phlogopite + spinel + sapphirine (zone A), spinel + sapphirine + corundum (zone B), corundum ( 30%) + biotite + plagioclase zone (zone C) and plagioclase + biotite + corundum ( 5%) zone (zone D). Chemical potential diagrams and mass balance reveal that the addition of Mg from ultramafic rocks and removal of Si from siliceous granulitic gneiss gave rise to residual enrichment of Al in the metasomatized mineral assemblages. We propose that contact metasomatism between the two units, promoted by melt influx, caused steady state diffusional transport across the profile. Corundum growth was promoted by the strong residual Al enrichment and Si depletion in reaction zone whereas sapphirine may have been formed under high Mg activity near the ultramafic rocks. Modelling also indicated that metasomatic alteration occurred at ca. 850 °C at 9 kbar, which is consistent with post-peak metamorphic conditions reached during the initial stage of exhumation in the lower crust and with temperature calculations based on conventional geothermometry.

Industrial applications of hot dry rock geothermal energy

NASA Astrophysics Data System (ADS)

Duchane, D. V.

1992-07-01

Geothermal resources in the form of naturally occurring hot water or steam have been utilized for many years. While these hydrothermal resources are found in many places, the general case is that the rock at depth is hot, but does not contain significant amounts of mobile fluid. An extremely large amount of geothermal energy is found around the world in this hot dry rock (HDR). Technology has been under development for more than twenty years at the Los Alamos National Laboratory in the United States and elsewhere to develop the technology to extract the geothermal energy from HDR in a form useful for electricity generation, space heating, or industrial processing. HDR technology is especially attractive for industrial applications because of the ubiquitous distribution of the HDR resource and the unique aspects of the process developed to recover it. In the HDR process, as developed at Los Alamos, water is pumped down a well under high pressure to open up natural joints in hot rock and create an artificial geothermal reservoir. Energy is extracted by circulating water through the reservoir. Pressurized hot water is returned to the surface through the production well, and its thermal energy is extracted for practical use. The same water is then recirculated through the system to mine more geothermal heat. Construction of a pilot HDR facility at Fenton Hill, NM, USA, has recently been completed by the Los Alamos National Laboratory. It consists of a large underground reservoir, a surface plant, and the connecting wellbores. This paper describes HDR technology and the current status of the development program. Novel industrial applications of geothermal energy based on the unique characteristics of the HDR energy extraction process are discussed.

In Situ Observation of Failure Mechanisms Controlled by Rock Masses with Weak Interlayer Zones in Large Underground Cavern Excavations Under High Geostress

NASA Astrophysics Data System (ADS)

Duan, Shu-Qian; Feng, Xia-Ting; Jiang, Quan; Liu, Guo-Feng; Pei, Shu-Feng; Fan, Yi-Lin

2017-09-01

A weak interlayer zone (WIZ) is a poor rock mass system with loose structure, weak mechanical properties, variable thickness, random distribution, strong extension, and high risk due to the shear motion of rock masses under the action of tectonism, bringing many stability problems and geological hazards, especially representing a potential threat to the overall stability of rock masses with WIZs in large underground cavern excavations. Focusing on the deformation and failure problems encountered in the process of excavation unloading, this research proposes comprehensive in situ observation schemes for rock masses with WIZs in large underground cavern on the basis of the collection of geological, construction, monitoring, and testing data. The schemes have been fully applied in two valuable project cases of an underground cavern group under construction in the southwest of China, including the plastic squeezing-out tensile failure and the structural stress-induced collapse of rock masses with WIZs. In this way, the development of rock mass failure, affected by the step-by-step excavations along the cavern's axis and the subsequent excavation downward, could be observed thoroughly. Furthermore, this paper reveals the preliminary analyses of failure mechanism of rock masses with WIZs from several aspects, including rock mass structure, strength, high stress, ground water effects, and microfracture mechanisms. Finally, the failure particularities of rock masses with WIZs and rethink on prevention and control of failures are discussed. The research results could provide important guiding reference value for stability analysis, as well as for rethinking the excavation and support optimization of rock masses with WIZs in similar large underground cavern under high geostress.

Integration of new geologic mapping and satellite-derived quartz mapping yields insights into the structure of the Roberts Mountains allochthon applicable to assessments for concealed Carlin-type gold deposits

USGS Publications Warehouse

Holm-Denoma, Christopher S.; Hofstra, Albert H.; Rockwell, Barnaby W.; Noble, Paula J.

2012-01-01

Geologic mapping and remote sensing across north-central Nevada enable recognition of a thick sheet of Middle and Upper Ordovician Valmy Formation quartzite that structurally overlies folded and faulted Ordovician through Devonian stratigraphic units of the Roberts Mountains allochthon. In the northern Independence Mountains and nearby Double Mountain area, the Valmy Formation is in fault contact with Ordovician through Silurian, predominantly clastic, sedimentary rocks of the Roberts Mountains allochthon that were deformed prior to, or during, emplacement of the Valmy thrust sheet. Similar structural relations are recognized discontinuously for 200 kilometers along the strike of the Roberts Mountains allochthon in mapping guided by regional remote-sensing-based (ASTER) quartz maps. Overall thicknesses of deformed Roberts Mountains allochthon units between the base of the Valmy and the top of underlying carbonate rocks that host large Carlin-type gold deposits varies on the order of hundreds of meters but is not known to exceed 700 meters. The base of the Valmy thrust sheet is a complimentary datum in natural resource exploration and mineral resource assessment for concealed Carlin-type gold deposits.

Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs, Wash volcanic centers, Southern Nevada

NASA Technical Reports Server (NTRS)

Taranik, James V.; Noble, Donald C.; Hsu, Liang C.; Spatz, David M.

1987-01-01

LANDSAT Thematic Mapper imagery was evaluated over 3 Tertiary calderas in southern Nevada. Each volcanic center derived from a highly evolved silici magmatic system represented today by well exposed diverse lithologies. Distinctive imagery contrast between some of the late ash flows and earlier units follows from the high relative reflectance in longer wavelength bands (bands 5 and 7) of the former. Enhancement techniques provide color composite images which highlight some of the units in remarkable color contrast. Inasmuch as coatings on the tuffs are incompletely developed and apparently largely dependent spectrally on rock properties independent of petrochemistry, it is felt that the distinctive imagery characteristics are more a function of primary lithologic or petrochemical properties. Any given outcrop is backdrop for a variety of cover types, of which coatings, at various stages of maturity, are one. Petrographic and X-ray diffraction analysis of the outer air-interface zone of coatings reveal they are composed chiefly of amorphous compounds, probably with varying proportions of iron and manganese. Observations support an origin for some outer (air-interface) coating constituents exogenous to the underlying host.

Quantitative fabric analysis of eclogite facies mylonites: texture and microtomography

NASA Astrophysics Data System (ADS)

Gomez Barreiro, J.; Voltolini, M.; Martinez-Catalan, J. R.; Benitez-Perez, J. M.; Diez-fernandez, R.; Wenk, H. R.; Vogel, S. C.; Mancini, L.

2014-12-01

Understanding the flow of rock deformed under eclogite facies conditions is crucial to constraint the dynamics of a subducting slab. Prograde metamorphism during burial in a subduction zone proceeds across several lithologies, resulting in heterogeneous eclogitization and potentially different processes. In order to explore the expression of such a variety in terms of a deformative fabric, we have analyzed texture and shape fabric of eclogites and eclogitic orthogneisses from the Malpica-Tui unit (NW Spain). We explore the same rock volumes with TOF-neutron diffraction (HIPPO @ LANSCE) and synchrotron microtomography (SYRMEP @Elettra). Orientation distribution functions were extracted after Rietveld refinement in MAUD and morphometric data (size, aspect ratio, orientation) were obtained after image processing with FIJI, Blob3D and MATLAB. Shape fabric reflects the macroscopic foliation and lineation and correlates with texture. Garnet fabric is particularly important because of the rheological implications of its mechanical behavior. Garnet shows little elongation in both samples, and texture is significant, what probably points to a relatively dry deformative environment, with diffusion-assisted dislocation. This eclogites could represent a rigidification stage in the subduction channel preserved during the exhumation at high-P and high-T documented in the Malpica-Tui unit during the Variscan orogeny.

A two-step crushed lava rock filter unit for grey water treatment at household level in an urban slum.

PubMed

Katukiza, A Y; Ronteltap, M; Niwagaba, C B; Kansiime, F; Lens, P N L

2014-01-15

Decentralised grey water treatment in urban slums using low-cost and robust technologies offers opportunities to minimise public health risks and to reduce environmental pollution caused by the highly polluted grey water i.e. with a COD and N concentration of 3000-6000 mg L(-1) and 30-40 mg L(-1), respectively. However, there has been very limited action research to reduce the pollution load from uncontrolled grey water discharge by households in urban slums. This study was therefore carried out to investigate the potential of a two-step filtration process to reduce the grey water pollution load in an urban slum using a crushed lava rock filter, to determine the main filter design and operation parameters and the effect of intermittent flow on the grey water effluent quality. A two-step crushed lava rock filter unit was designed and implemented for use by a household in the Bwaise III slum in Kampala city (Uganda). It was monitored at a varying hydraulic loading rate (HLR) of 0.5-1.1 m d(-1) as well as at a constant HLR of 0.39 m d(-1). The removal efficiencies of COD, TP and TKN were, respectively, 85.9%, 58% and 65.5% under a varying HLR and 90.5%, 59.5% and 69%, when operating at a constant HLR regime. In addition, the log removal of Escherichia coli, Salmonella spp. and total coliforms was, respectively, 3.8, 3.2 and 3.9 under the varying HLR and 3.9, 3.5 and 3.9 at a constant HLR. The results show that the use of a two-step filtration process as well as a lower constant HLR increased the pollutant removal efficiencies. Further research is needed to investigate the feasibility of adding a tertiary treatment step to increase the nutrients and microorganisms removal from grey water. Copyright © 2013 Elsevier Ltd. All rights reserved.

Geodynamic simulation of ore-bearing geological structural units by the example of the Strel'tsovka uranium ore field

NASA Astrophysics Data System (ADS)

Petrov, V. A.; Leksin, A. B.; Pogorelov, V. V.; Rebetsky, Yu. L.; San'kov, V. A.; Ashurkov, S. V.; Rasskazov, I. Yu.

2017-05-01

Information on designing a 3D integrated model of the deflected mode (DM) of rock massif near the Strel'tsovka uranium ore field (SUOF) in the southeastern Transbaikal region is presented in the paper. This information is based on the contemporary stresses estimated by geostructural and tectonophysical techniques and by studying the seismotectonic deformation of the Earth's surface using the data on earthquake source mechanisms and GPS geodesy focused on the recognition of active faults. A combination of the results of geostructural, geophysical, geotectonic, and petrophysical research, as well as original maps of faulting and the arrangement of seismic dislocations and seismotectonic regimes (stress tensors), allowed us to design models of the structure, properties, and rheological links of the medium and to determine the boundary conditions for numerical tectonophysical simulation using the method of terminal elements. The computed 2D and 3D models of the state of the rock massif have been integrated into 3D GIS created on the basis of the ArcGIS 10 platform with an ArcGIS 3D-Analyst module. The simulation results have been corroborated by in situ observations on a regional scale (the Klichka seismodislocation, active from the middle Pliocene to date) and on a local scale (heterogeneously strained rock massif at the Antei uranium deposit). The development of a regional geodynamic model of geological structural units makes it possible to carry out procedures to ensure the safety of mining operations under complex geomechanical conditions that can expose the operating mines and mines under construction, by the Argun Mining and Chemical Production Association (PAO PPGKhO) on a common methodical and geoinformational platform, to the hazards of explosions, as well as to use the simulation results aimed at finding new orebodies to assess the flanks and deep levels of the ore field.

Geology of parts of the Johnny Gulch quadrangle, Montana

USGS Publications Warehouse

Freeman, Val L.

1954-01-01

An area of about 35 square miles, situated about 30 miles southeast of Helena, Montana, was mapped during the summer of 1952 at a scale of l:24, 000. The area includes a part of the eastern foothills of the Elkhorn Mountains, and is underlain by sedimentary mad volcanic rocks of Cretaceous age that were intruded during late Cretaceous or early Tertiary time by several types of igneous rocks. The oldest rocks in the map area are the nonmarine sandstone, shale, and limestone of the Kootenai formation. These are overlain disconformably by the black shale siltstone, sandstone, and siliceous mudstone of the Colorado group that is subdivided into three map units; a lower black shale unit composed of black shale and silty shale with a basal clean sandstone, all of probable marine origin; a middle siliceous unit composed of sandstone, siltstone, and siliceous mudstone of both marine and nonmarine origin; and an upper black unit composed of black shale of marine origin. Conformably above the Colorado group are crystal lithic turfs of the Slim Sam formation; in places theme grade into and in other places are unconformably overlain by the Elkhorn Mountains volcanics composed of crystal tuff, breccia, flows, and bedded tuff of andesitic composition. The rocks of the Elkhorn Mountains volcanics and older formations have been intruded by diorite porphyry and related rocks and by hornblende quartz monzonite. The diorite porphyry and related rocks include hornblende diorite porphyry, hornblende augite diorite porphyry, augite diorite porphyry, and basalt. Resting with marked unconformity upon older rocks are volcanic sedimentary rocks of early Tertiary age that are locally overlain by thin rhyolite flows. Late Tertiary and Quaternary fans overlie the rhyolite flows. Alluvium, talus, and other mantle are present in small amounts in many parts of the area. The sedimentary rocks of the area mapped form a part of the east flank of a major anticline. A major north-south syncline to the north of map area is believed to have been deflected to the east of the area because of the rigidity of large irregular plutons of diorite porphyry. The location of the plutons may have been controlled by the initiation of the major syncline, by a postulated pre-intrusive fault, or by both. Most of the small-scale structural features are related to the emplacement of the plutons. During emplacement the intruded sediments yielded either by faulting or by folding; the deeper rocks failed by faulting and the shallower rocks failed by folding. The area contains deposits of gold, silver, copper, lead, and zinc, none of which are currently being mined; and a deposit of magnetite which is being mined for use in cement.

Bioremediation in Fractured Rock: 2. Mobilization of Chloroethene Compounds from the Rock Matrix.

PubMed

Shapiro, Allen M; Tiedeman, Claire R; Imbrigiotta, Thomas E; Goode, Daniel J; Hsieh, Paul A; Lacombe, Pierre J; DeFlaun, Mary F; Drew, Scott R; Curtis, Gary P

2018-03-01

A mass balance is formulated to evaluate the mobilization of chlorinated ethene compounds (CE) from the rock matrix of a fractured mudstone aquifer under pre- and postbioremediation conditions. The analysis relies on a sparse number of monitoring locations and is constrained by a detailed description of the groundwater flow regime. Groundwater flow modeling developed under the site characterization identified groundwater fluxes to formulate the CE mass balance in the rock volume exposed to the injected remediation amendments. Differences in the CE fluxes into and out of the rock volume identify the total CE mobilized from diffusion, desorption, and nonaqueous phase liquid dissolution under pre- and postinjection conditions. The initial CE mass in the rock matrix prior to remediation is estimated using analyses of CE in rock core. The CE mass mobilized per year under preinjection conditions is small relative to the total CE mass in the rock, indicating that current pump-and-treat and natural attenuation conditions are likely to require hundreds of years to achieve groundwater concentrations that meet regulatory guidelines. The postinjection CE mobilization rate increased by approximately an order of magnitude over the 5 years of monitoring after the amendment injection. This rate is likely to decrease and additional remediation applications over several decades would still be needed to reduce CE mass in the rock matrix to levels where groundwater concentrations in fractures achieve regulatory standards. © 2017, National Ground Water Association.

Occurrence and availability of ground water in the Athens region, northeastern Georgia

USGS Publications Warehouse

Radtke, D.B.; Cressler, C.W.; Perlman, H.A.; Blanchard, H.E.; McFadden, K.W.; Brooks, Rebekah

1986-01-01

A study was conducted to assess the occurrence and availability of groundwater in the crystalline rocks of the Piedmont area in northeastern Georgia and to determine whether groundwater is a viable alternative or supplemental source for industrial, public and private supplies. The area is underlain by a variety of metamorphic and igneous rocks. The quantity of water that a rock unit can supply to wells is determined by the number, capacity, and interconnection of the secondary openings. Of an estimated 10,000 successful wells drilled in the Athens Region, 972 wells are reported by drilling contractors to supply from 20 to 300 gal/min. Studies of well sites revealed that high yielding wells can be developed only where the water bearing units have undergone significant increases in secondary permeability. This occurs mainly in association with (1) contact zones between rock units of contrasting character, (2) contact zones within multilayered rock units, (3) fault zones, (4) stress-relief fractures, and (5) shear zones. Groundwater may be a viable alternative or supplemental source for industrial, public, and private supplies in much of the Athens Region. In 1980, groundwater made up 38% (18 million gal/day) of the total water used in the area. Yields of 20 to more than 200 gal/min are obtained from wells throughout most of the region, and the water is generally of good chemical quality and is suitable for drinking and many other uses. Concentrations of dissolved constituents are fairly consistent throughout the area. Except for iron, manganese, and fluoride, dissolved constituents rarely exceed drinking water standards. (Lantz-PTT)

Geology and Our Environment. Environmental Education Curriculum. Revised.

ERIC Educational Resources Information Center

Topeka Public Schools, KS.

Rocks, and the soil formed from rock, play a major role in determining such particulars as the type of crops that can be grown in a specific area and the type of housing that can be constructed. Also, rocks may supply fuel and building materials, and provide information about the history of an area. This unit is constructed to expose secondary…

Thinking Like a Geologist

ERIC Educational Resources Information Center

Morris, Kirsty

2010-01-01

Geology is not something that people tend to think about in their day-to-day lives; at least, not until it is time to dig out the dusty old rock collection from the back of the science cupboard and teach the rocks and soils unit again! Geology is very much part of people's lives. Geology is about so much more than just looking at rocks and…

The Enigmatic Bench Unit of Endeavour Crater Rim in Meridiani Planum, Mars

NASA Astrophysics Data System (ADS)

Ruff, S. W.

2013-12-01

For the first 2680 sols of its mission, the Mars Exploration Rover Opportunity traversed across essentially the same rocks: sulfur-rich sandstones known as the Burns formation. On August 8, 2011 Opportunity completed a ~21 km traverse from Victoria crater to the rim of the ~22 km diameter Endeavour crater where it crossed a slightly raised smooth bench unit that surrounds an interior core of higher standing and more rugged terrain on a rim segment named Cape York. As recognized by its distinctive morphologic character evident in orbital images, the inward sloping bench feature is found associated with portions of other segments of the discontinuous raised rim of Endeavour crater. Viewed by Opportunity, it appears as platy, fractured, relatively light-toned outcrop that is fine-grained, lacks hematite concretions and in places hosts veins of Ca- and S-rich composition, likely due to precipitation of gypsum in fractures that cut the bench unit (1). The bench outcrop target named Grasberg included a grind using the Rock Abrasion Tool (RAT) to obtain a cleaner surface for the Alpha Particle X-ray Spectrometer chemistry measurement compared with the initially investigated target named Deadwood. In addition to its greater strength than Burns formation as determined by the RAT grind operation, Grasberg and other examples of the bench unit have lower S, higher Cl and other elemental characteristics that depart from typical Burns formation. Thus the 'Grasberg unit' clearly represents a distinct rock type compared to the Meridiani plains. A second unit makes up the exposed core of the Cape York rim segment. Known as Shoemaker formation, it is composed of breccias that are recognized as a suevite deposit produced from the Endeavour impact event (1). The Shoemaker formation appears to be onlapped by the Grasberg unit with Burns formation onlapping it (1). However, a well-exposed section observed in a wedge-shaped fracture known as Whim Creek on the northeast portion of the Cape York bench clearly presents Grasberg rocks above Burns rocks. Erosion of a plunging synclinal form could explain this apparent inverted relationship, or it reveals that the Grasberg unit is younger than Burns formation. But this latter interpretation implies that Grasberg rocks, which have been observed only at the Endeavour rim, have been stripped off of Burns formation everywhere else. The Grasberg bench unit has recently been encountered in an isthmus setting between two low knobs of presumed Shoemaker formation called Nobbys Head and Sutherland Point just south of Cape York. The isthmus also presents Grasberg as topographically elevated above the Burns formation rocks. Despite its broad, smooth exposure, no remnants of Burns formation have been found on top of Grasberg at this location or anywhere on the Cape York bench. So the stratigraphic relationship between Grasberg and Burns rocks remains enigmatic. At the time of writing, Opportunity is at the edge of Solander Point, another bench feature on the northern tip of a rim segment known as Cape Tribulation. The erosional expression of this example appears different from those examined previously and perhaps offers the best chance to understand stratigraphic relationships. 1. S. W. Squyres et al., Ancient impact and aqueous processes at Endeavour Crater, Mars. Science 336, 570 (2012).

Magnetic susceptibility data for some exposed bedrock in the western conterminous United States

USGS Publications Warehouse

Gettings, Mark E.; Bultman, Mark W.

2014-01-01

In-place rock magnetic susceptibility measurements for 746 sites in the western conterminous United States are reported in a database. Of these 746 sites, 408 sites are in the Silverton Caldera area of the San Juan Mountains of southwestern Colorado. Of the 408 sites in the Silverton Caldera area, 106 sites are underground. The remaining 338 sites outside the Silverton Caldera area were on outcropping rock, are distributed from southern Arizona to northwestern Wyoming, and include data from California, Nevada, Utah, Colorado, and New Mexico. Rock-density measurements are included for some sites. These data have been collected by various U.S. Geological Survey studies from 1991 through 2012 and are intended to help improve geophysical modeling of the Earth’s crust in the Western United States. A map-based graphical user interface is included to facilitate use of the data.

81. PHOTOCOPY OF PHOTOGRAPH SHOWING NEW CREEK CHANNEL UNDER CONSTRUCTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

81. PHOTOCOPY OF PHOTOGRAPH SHOWING NEW CREEK CHANNEL UNDER CONSTRUCTION AT P STREET BEND, FROM 1940 REPORT ON PROPOSED DEVELOPMENT OF ROCK CREEK AND POTOMAC PARKWAY, SECTION II (ROCK CREEK AND POTOMAC PARKWAY FILE, HISTORY DEPARTMENT ARCHIVES, NATIONAL PARK SERVICE, WASHINGTON, DC). - Rock Creek & Potomac Parkway, Washington, District of Columbia, DC

Late Cretaceous stratigraphy, deformation and intrusion in the Madison Range of southwestern Montana ( USA).

USGS Publications Warehouse

Tysdal, R.G.; Marvin, R.F.; Dewitt, E.

1986-01-01

Dating of orogenic rock units in the central part of the Madison Range shows that Laramide deformation was virtually completed by the end of the Cretaceous. Early Campanian K-Ar dates of about 79 m.y. were obtained from welded tuffs in the basal part of the Livingston Formation, a volcanic and volcaniclastic assemblage that is conformable with underlying Cretaceous clastic rocks and with the overlying Sphinx Conglomerate. The Sphinx and the Livingston were deformed by the Hilgard fault system which extends along the western side of the southern two-thirds of the range. This north-trending fault system represents the culmination of Laramide shortening within the range. Dating of hornblende indicates an approximate date of 68-69 m.y. B.P. for emplacement of the igneous suite. The dacite postdates movement along faults of the Hilgard fault system, and postdates the synorogenic Sphinx Conglomerate. -from Authors

National geochronological and natural radioelement data bases

USGS Publications Warehouse

Zartman, Robert E.; Bush, Charles A.; Abston, C.C.

1995-01-01

This CD-ROM contains both the National Geochronological Data Base [NGDB] and the Natural Radioelement Data Base [NRDB]. Supporting location, geologic, and reference information is provided for both data bases. The NGDB is a compilation of more than 30,000 individual published Pb-alpha, fission-track, K-Ar, Rb-Sr, U-Th-Pb, and Sm-Nd rock and mineral ages reported on approximately 18,000 dated samples from the United States. A program is provided to search the data files by latitude and longitude, state, analytical method, and age range. The NGDB is provided as quote-comma delimited files that can be entered into most commercial spreadsheet programs. The NRDB gives gamma-ray spectrometric analyses of the natural radioelements (U, Th, and K) for more than 8500 whole-rock samples obtained under the USGS Natural Radioelement Distribution Project. A program is provided to search the data files by state, keyword, U content, Th content, and K content.

Stratigraphic and hydrogeologic framework of the Alabama Coastal Plain

USGS Publications Warehouse

Davis, M.E.

1988-01-01

Tertiary and Cretaceous sand aquifers of the Southeastern United States Coastal Plain comprise a major multlstate aquifer system informally defined as the Southeastern Coastal Plain aquifer system, which is being studied as part of the U.S. Geological Survey's Regional Aquifer System Analysis (RASA) program. The major objectives of each RASA study are to identify, delineate, and map the distribution of permeable clastlc rock, to examine the pattern of ground-water flow within the regional aquifers, and to develop digital computer simulations to understand the flow system. The Coastal Plain aquifers in Alabama are being studied as a part of this system. This report describes the stratlgraphlc framework of the Cretaceous, Tertiary, and Quaternary Systems in Alabama to aid in delineating aquifers and confining units within the thick sequence of sediments that comprises the Southeastern Coastal Plain aquifer system in the State. Stratigraphlc units of Cretaceous and Tertiary age that make up most of the aquifer system in the Coastal Plain of Alabama consist of clastlc deposits of Early Cretaceous age; the Coker and Gordo Formations of the Tuscaloosa Group, Eutaw Formation, and Selma Group of Late Cretaceous age; and the Midway, Wilcox, and Clalborne Groups of Tertiary age. However, stratigraphlc units of late Eocene to Holocene age partially overlie and are hydraulically connected to clastic deposits in southern Alabama. These upper carbonate and clastlc stratlgraphic units also are part of the adjoining Florldan and Gulf Coastal Lowlands aquifer systems. The Coastal Plain aquifer system is underlain by pre-Cretaceous rocks consisting of low-permeabillty sedimentary rocks of Paleozolc, Triassic, and Jurassic age, and a complex of metamorphic and igneous rocks of Precambrian and Paleozolc age similar to those found near the surface in the Piedmont physiographic province. Twelve hydrogeologlc units in the Alabama Coastal Plain are defined--slx aquifers and six confining units. Aquifers of the Coastal Plain aquifer system are composed of fine to coarse sand, gravel, and limestone; confining beds are composed of clay, shale, chalk, marl, and metamorphic and igneous rocks.

Publications - GMC 54 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

DGGS GMC 54 Publication Details Title: Source rock evaluation/TAI for ARCO Itkillik River Unit #1 information. Bibliographic Reference Texaco, Inc., [n.d.], Source rock evaluation/TAI for ARCO Itkillik River

Configuration of the top of the Floridan aquifer, Southwest Florida Water Management District and adjacent areas

USGS Publications Warehouse

Buono, A.; Rutledge, A.T.

1978-01-01

This map depicts the approximate top of the rock that composes the Floridan aquifer. The contours represent the elevation of the top of the Floridan aquifer to mean sea level. Rock units recognized to be part of the Floridan aquifer are limestone and dolomite ranging from middle Eocene to early Miocene. They are Lake City Limestone, Avon Park Limestone, Ocala Limestone, Suwannee Limestone, and Tampa Limestone. In this report, the top of the Floridan aquifer is a limestone defined as the first consistent rock of early Miocene age or older below which occur no clay confining beds. Although the Hawthorn formation of middle Miocene is considered part of the Floridan aquifer when it is in direct hydrologic contact with lower lying rock units, it is not considered here because of a lack of detailed delineation of areas where contact exists. (Woodard-USGS)

Aeromagnetic survey map of Sacramento Valley, California

USGS Publications Warehouse

Langenheim, Victoria E.

2015-01-01

Three aeromagnetic surveys were flown to improve understanding of the geology and structure in the Sacramento Valley. The resulting data serve as a basis for geophysical interpretations, and support geological mapping, water and mineral resource investigations, and other topical studies. Local spatial variations in the Earth's magnetic field (evident as anomalies on aeromagnetic maps) reflect the distribution of magnetic minerals, primarily magnetite, in the underlying rocks. In many cases the volume content of magnetic minerals can be related to rock type, and abrupt spatial changes in the amount of magnetic minerals commonly mark lithologic or structural boundaries. Bodies of serpentinite and other mafic and ultramafic rocks tend to produce the most intense positive magnetic anomalies (for example, in the northwest part of the map). These rock types are the inferred sources, concealed beneath weakly magnetic, valley-fill deposits, of the most prominent magnetic features in the map area, the magnetic highs that extend along the valley axis. Cenozoic volcanic rocks are also an important source of magnetic anomalies and coincide with short-wavelength anomalies that can be either positive (strong central positive anomaly flanked by lower-amplitude negative anomalies) or negative (strong central negative anomaly flanked by lower-amplitude positive anomalies), reflecting the contribution of remanent magnetization. Rocks with more felsic compositions or even some sedimentary units also can cause measurable magnetic anomalies. For example, the long, linear, narrow north-trending anomalies (with amplitudes of <50 nanoteslas [nT]) along the western margin of the valley coincide with exposures of the Mesozoic Great Valley sequence. Note that isolated, short-wavelength anomalies, such as those in the city of Sacramento and along some of the major roads, are caused by manmade features.

Laboratory Simulations of Permeability Pertaining to Biosignature Development and Preservation Potential for Martian Subsurface Habitability

NASA Astrophysics Data System (ADS)

Perl, S. M.; Corsetti, F. A.; Berelson, W.; Nealson, K. H.; Bhartia, R.

2014-12-01

Sedimentological and mineralogical observations indicate that sandstones within the Eagle and Endurance crater sections of the Burns Formation of Meridiani Planum, Mars, were derived from sulfate-bearing altered basalt, possibly from a playa lake, and deposited by eolian and locally subaqueous processes in a eolian dune - sand sheet - interdune setting. Abrasion of rocks within the outcrop outlining Endurance Crater by the MER rover Opportunity revealed void spaces later determined to be secondary pore space created from the dissolution of soluble minerals from multiple groundwater movement (recharge) events. Previous investigations into the secondary porosity and permeability of rocks within the Karatepe section showed that the ability for fluid movement through the vertical sedimentary section was greatest between the Upper and Middle units at the Whatanga contact within Endurance Crater, where secondary porosity was measured to be ~40% of the rock. Our investigations into quantifying subsurface habitability involve simulating the paleo-groundwater environments on the micro-to-mesoscale (sub mm-scale to cm-scale) to determine how preservation potential changes with repeated water-rock interaction, varying fluid chemistry (pH, salinity, T, others), and pressure changes under Earth and Mars conditions. In addition to fluids, microbes (extremophiles) will be introduced into our simulation to observe how changing experimental input conditions impact the growth and development of biotic interactions and eventually biosignatures left behind within sedimentary microtextures. Moreover, detection of biosignatures using visual and UV methods will help inform the M2020 rover mission regarding in-situ analysis of abraded rock outcrops. Finally, results of this work will use terrestrial rocks and fluids from a known Mars analogue (the Rio Tinto basin) in order to aid in determining habitability and survivability in acidic and high saline conditions that are similar to Meridiani Planum, Mars.

Geology and Mineral Resources of the Northern Part of the North Cascades National Park, Washington

USGS Publications Warehouse

Staatz, Mortimer Hay; Tabor, Rowland W.; Weis, Paul L.; Robertson, Jacques F.; Van Noy, Ronald M.; Pattee, Eldon C.

1972-01-01

The northern part of the North Cascades National Park in northern Washington is north of the Skagit River between Mount Shuksan on the West and Ross Lake on the east. The area occupies approximately 500 square miles of steep mountains and thickly forested valleys centered on the precipitous Picket Range. Old metamorphic rocks and young volcanic and sedimentary rocks are intruded by large masses of granitic rocks that together form a diverse, complicated, but well-exposed geologic section. The granitic rocks are the most abundant in the area; they intrude most of the other rocks, and they separate one suite of rocks in the eastern part of the area from a second suite in the western part. In the eastern part of the area, the oldest rocks are the Custer Gneiss of McTaggart and Thompson, a thick sequence of biotite and hornblende gneisses and schists. We have divided these rocks into three generalized units: light-colored gneiss, banded gneiss, and amphibole-rich gneiss. To the northeast of these rocks lies a metagabbro. This rock type is complex and is made up of several types of gabbro, diorite, amphibolite, ultramafic rocks, and quartz diorite that crop out along the Ross Lake fault zone. To the northeast of these rocks and also along the Ross Lake fault zone is the phyllite and schist of Ross Lake. These rocks are the highly sheared and metamorphosed equivalents of the plagioclase arkose and argillite sequence of Jurassic and Cretaceous age that is so widespread on the east side of Ross Lake. The Cretaceous Hozomeen Group of Cairnes lies along Ross Lake northeast of the phyllite and schist and consists mainly of slightly metamorphosed greenstones with subordinate chert and phyllite. The phyllite in this unit is similar to that in the underlying phyllite and schist of Ross Lake with which it appears to be interbedded. The youngest rocks in the eastern part of the area are the Skagit Volcanics a thick sequence of welded tuff-breccia with some flows and air-laid tuffs. These rocks, which are probably early Tertiary in age, overlie the Hozomeen Group and the Custer Gneiss along the Canadian border. In the western part of the area the oldest rocks are greenschist and phyllite of Mount Shuksan. These fine-grained foliated and crinkled rocks commonly contain narrow lenses or layers of quartz. They are unconformably overlain by the Chuckanut Formation in the southern part of the area. This formation, which is of Paleocene and Late Cretaceous age, is made up mainly of gently dipping plagioclase arkose with some interbedded black argillite and conglomerate. The Hannegan Volcanics overlie the Chuckanut in the northern part of the area and the greenschist and phyllite of Mount Shuksan in the central part. The Hannegan Volcanics which are of early Tertiary age, consist principally of air-laid volcanic breccias and tuffs, but also include some flows and one small porphyry stock. The Chilliwack composite batholith consists of several types of granitic rocks, which were intruded at different times in the Tertiary. The two principal rock types are granodiorite and quartz diorite, but small bodies of quartz monzonite diorite, and alaskite are found in many parts of the area. Contacts between the various rock types may be either abrupt or gradational. All rocks of the Chilliwack batholith are younger than the other rock types except the Skagit and Hannegan Volcanics, which are in part younger than rocks of the batholith. At least two periods of deformation are indicated by the tight folding of the older Custer Gneiss and the greenschist and phyllite of Mount Shuksan and the gentle folding of the younger Chuckanut Formation. At least three periods of faulting occurred, one before and two after the intrusion of the Chilliwack batholith. The two largest fault structures are the Ross Lake fault zone and a long northeast-striking fault that extends for 20 miles from Mount Shuksan down the Chilliwack Valley. The Ross Lake fault zone is pro

Alteration of submarine volcanic rocks in oxygenated Archean oceans

NASA Astrophysics Data System (ADS)

Ohmoto, H.; Bevacqua, D.; Watanabe, Y.

2009-12-01

Most submarine volcanic rocks, including basalts in diverging plate boundaries and andesites/dacites in converging plate boundaries, have been altered by low-temperature seawater and/or hydrothermal fluids (up to ~400°C) under deep oceans; the hydrothermal fluids evolved from shallow/deep circulations of seawater through the underlying hot igneous rocks. Volcanogenic massive sulfide deposits (VMSDs) and banded iron formations (BIFs) were formed by mixing of submarine hydrothermal fluids with local seawater. Therefore, the behaviors of various elements, especially of redox-sensitive elements, in altered submarine volcanic rocks, VMSDs and BIFs can be used to decipher the chemical evolution of the oceans and atmosphere. We have investigated the mineralogy and geochemistry of >500 samples of basalts from a 260m-long drill core section of Hole #1 of the Archean Biosphere Drilling Project (ABDP #1) in the Pilbara Craton, Western Australia. The core section is comprised of ~160 m thick Marble Bar Chert/Jasper Unit (3.46 Ga) and underlying, inter-bedded, and overlying submarine basalts. Losses/gains of 65 elements were quantitatively evaluated on the basis of their concentration ratios against the least mobile elements (Ti, Zr and Nb). We have recognized that mineralogical and geochemical characteristics of many of these samples are essentially the same as those of hydrothermally-altered modern submarine basalts and also those of altered volcanic rocks that underlie Phanerozoic VMSDs. The similarities include, but are not restricted to: (1) the alteration mineralogy (chlorite ± sericite ± pyrophyllite ± carbonates ± hematite ± pyrite ± rutile); (2) the characteristics of whole-rock δ18O and δ34S values; (3) the ranges of depletion and enrichment of Si, Al, Mg, Ca, K, Na, Fe, Mn, and P; (4) the enrichment of Ba (as sulfate); (5) the increases in Fe3+/Fe2+ ratios; (6) the enrichment of U; (7) the depletion of Cr; and (8) the negative Ce anomalies. Literature data on other submarine volcanic rocks in Pilbara, Australia (~3.55 Ga to ~3.2 Ga in age) and the ~2.9 - 2.7 Ga submarine volcanic rocks in Ontario, Canada indicate that many of these rocks exhibit the same characteristics (1)-(8). Characteristics (4) was probably caused by the mixing of Ba-rich hydrothermal fluids and SO42--rich seawater; (5) and the abundance of hematite by reactions between ferrous-rich minerals and O2-rich seawater; (6) by reactions between ferrous-rich minerals and U-rich seawater; (7) by leaching of Cr from rocks by O2-rich seawater; and (8) by reactions with Ce-depleted oxidized seawater. These data suggest that the chemistry of ocean water, including the concentrations of major elements and many redox-sensitive elements/compounds (e.g., U, Ce, SO42-, and O2), has been basically the same since at least ~3.5 Ga, except for the higher ∑CO2 contents in Archean oceans. O2 contents of deep (>200 m) oceans would become zero when the atmospheric pO2 decreased to less than ~50% of the present level. Therefore, geochemical data on the Archean rocks further suggest that the atmospheric pO2 level, the fluxes of bio-essential elements to the oceans (e.g., K, PO43-, NO3-, Ba, Mo, W), and the biological productivity in the oceans, have been basically the same since at least ~3.5 Ga.

Geology of the surficial aquifer system, Dade County, Florida; lithologic logs

USGS Publications Warehouse

Causaras, C.R.

1986-01-01

The geologic framework of the surficial aquifer system in Dade County, Florida, was investigated as part of a longterm study by the USGS in cooperation with the South Florida Water Management District, to describe the geology, hydrologic characteristics, and groundwater quality of the surficial aquifer system. Thirty-three test wells were drilled completely through the surficial aquifer system and into the underlying, relatively impermeable units of the Tamiami and Hawthorn Formations. Detailed lithologic logs were made from microscopic examination of rock cuttings and cores obtained from these wells. The logs were used to prepare geologic sections that show the lithologic variations, thickness of the lithologic units, and different geologic formations that comprise the aquifers system. (Author 's abstract)

What Happens Where the Water and the Rock Touch in Small Space Bodies

NASA Astrophysics Data System (ADS)

Byrne, P. K.; Regensburger, P. V.; Klimczak, C.; Bohnenstiehl, D. R.; Dombard, A. J.; Hauck, S. A., II

2017-12-01

There are several small space bodies that go around bigger worlds that might have a layer of water under a layer of ice. Lots of study has been done to understand the outside ice layer of these small space bodies, because the ice can tells us important things about the big water layer under it. Some of these small space bodies are very interesting because the right things for life—water, hot rock, and food—might be at the bottom of the water layer, where it touches the top of the next layer down, which is made of rock. But it is very hard to understand what this rock at the bottom of the water is like, because we can't see it. So, we are imagining what this rock is like by thinking about what the rock is like under the water layer on our own world. If hot rock comes out of the rock layer through cracks under the water, the cold of the water makes the hot rock go very cold very fast, and it makes funny rolls as it does so. This might happen on some small space bodies that are hot enough on the inside to make hot rock. We know that on our own world the rock layer under the water is wet to as far down as cracks can go, so it makes sense that this is true for small space bodies, too. We did some thinking about numbers and found out that the cracks can go a few ten hundred steps into the rock layer on small space bodies, but for bigger (well, not quite so small) space bodies, the cracks can go at least tens of ten hundred steps into the rock layer. This means that water goes into the rock layer this much, too. But get this: some small bodies are not really that small—one of them is bigger than the first world from the Sun! And on a few of these big (small) bodies, the layer of water is so heavy that the bottom of that water is pushed together from all sides and turns into a type of hot ice. This means that, for these big (small) worlds, the water can't get into the rock layer through cracks (since there is a layer of hot ice in the way), and so these bodies are not such good places to think about where life might be.

The Conterminous United States Mineral Assessment Program; background information to accompany folio of geologic, geophysical, geochemical, mineral-occurrence, mineral-resource potential, and mineral-production maps of the Charlotte 1 degree x 2 degrees Quadrangle, North Carolina and South Carolina

USGS Publications Warehouse

Gair, Jacob Eugene; Goldsmith, Richard; Daniels, D.L.; Griffitts, W.R.; DeYoung, J.H.; Lee, M.P.

1986-01-01

This Circular and the folio of separately published maps described herein are part of a series of reports compiled under the Conterminous United States Mineral Assessment Program ICUSMAP). The folio on the Charlotte 1 degree ? 2 degree quadrangle, North Carolina and South Carolina, includes (1) a geologic map; (2) four geophysical maps; (3) geochemical maps for metamorphic heavy minerals, copper, lead and artifacts, zinc, gold, tin, beryllium, niobium, tungsten, molybdenum, titanium, cobalt, lithium, barium, antimony-arsenic-bismuth-cadmium, thorium-cerium-monazite, and limonite; (4) mineral-occurrence maps for kyanite-sillimanite-lithium-mica-feldspar-copper-lead-zinc, gold-quartz-barite-fluorite, iron-thorium-tin-niobium, and construction materials-gemstones; (5) mineral-resource potential maps for copper-lead-zinc-combined base metals, gold, tin-tungsten, beryllium-molybdenum-niobium, lithium-kyanite- sillimanitebarite, thorium (monazite)-uranium, and construction materials; and (6) mineral-production maps. The Charlotte quadrangle is mainly within the Piedmont physiographic province and extends from near the Coastal Plain on the southeast into the Blue Ridge province on the northwest for a short distance. Parts of six lithotectonic belts are present--the Blue Ridge, the Inner Piedmont, the Kings Mountain belt, the Charlotte belt, the Carolina slate belt, and the Wadesboro basin. Igneous, metamorphic, and sedimentary rocks are present and range in age from Proterozoic to Mesozoic; alluvial sediments of Quaternary age occur along rivers and larger streams. Rocks of the Blue Ridge include Middle Proterozoic granitoid gneiss intruded by Late Proterozoic granite; Late Proterozoic paragneiss, schist, and other metasedimentary and metavolcaniclastic rocks (Ashe and Grandfather Mountain Formations); Late Proterozoic and Early Cambrian metasedimentary rocks (Chilhowee Group); and Early Cambrian sedimentary rocks (Shady Dolomite). Paleozoic granites intrude the Proterozoic rocks. The Inner Piedmont contains noncarbonate metasedimentary rocks and amphibolite of medium to high metamorphic grades. These rocks are intruded by the Toluca Granite and Henderson Gneiss of Cambrian and Ordovician(?) age. The Charlotte belt consists largely of Late Proterozoic to Late Paleozoic granitic and gabbroic plutonic rocks and intervening enclaves of metasedimentary and metavolcanic rocks. The narrow Kings Mountain belt is located between the Charlotte and the Inner Piedmont belts and contains mainly Late Proterozoic metasedimentary rocks and plutonic rocks similar to those of the Charlotte belt. The Carolina slate belt, flanking the Charlotte belt on the east, contains weakly metamorphosed volcanic and sedimentary rocks. East of this belt, at the southeast corner of the quadrangle, is the Wadesboro basin, which has continental sedimentary rocks of Triassic age. Layered rocks westward from and in the Charlotte belt are complexly folded, are steeply dipping, and in the Blue Ridge and Inner Piedmont are contained within major thrust slices. Rocks of the Carolina slate belt are gently folded. Rocks of the Wadesboro basin occur in downfaulted blocks. The geophysical surveys of the Charlotte quadrangle consisted of Bouguer gravity, aeromagnetic, and aeroradioactivity surveys and used both newly obtained data and information from prior work. The gravity survey disclosed a distinct northeast-trending, northwest-decreasing gradient, which is part of the major gravity gradient that extends the length of the Appalachian Mountains. Granitic plutons of the Charlotte belt, in particular, are marked by gravity lows, and gabbro plutons, by highs. Several of the geologic belts display distinct magnetic character. The aeroradioactivity surveys showed a swath of consistently high gamma-ray intensities along the central part of the Inner Piedmont belt; these high intensities correspond to the so-called monazite belt. Oval patterns of high gamma-ray readi

A Hydraulic Stress Measurement System for Investigations at Depth in Slim Boreholes

NASA Astrophysics Data System (ADS)

Ask, M. V. S.; Ask, D.; Cornet, F. H.; Nilsson, T.; Talib, M.; Sundberg, J.

2017-12-01

Knowledge of the state of stress is essential to most underground work in rock mechanics as it provides means to analyze the mechanical behavior of a rock mass, serve as boundary condition in rock engineering problems, and help understand rock mass stability and groundwater flow. Luleå University of Technology (LTU) has developed and built a wire-line system for hydraulic rock stress measurements in slim boreholes together with the University of Strasbourg and Geosigma AB. The system consists of a downhole- and a surface unit. The downhole unit consists of hydraulic fracturing equipment (straddle packers and downhole imaging tool) and their associated data acquisition systems. The surface unit comprises of a 40-foot container permanently mounted on a trailer, which is equipped with a tripod, wire-line winches, water hydraulics, and a generator. The surface unit serves as a climate-independent on-site operations center, as well as a self-supporting transport vessel for the entire system. Three hydraulic stress testing methods can be applied: hydraulic fracturing, sleeve fracturing and hydraulic testing of pre-existing fractures. The three-dimensional stress tensor and its variation with depth within a continuous rock mass can be determined in a scientific unambiguously way by integrating results from the three test methods. The testing system is state of the art in several aspects including: (1) Large depth range (3 km), (2) Ability to test three borehole dimensions, (3) Resistivity imager maps the orientation of tested fracture (which is highlighted); (4) Highly stiff and resistive to corrosion downhole testing equipment; and (5) Very detailed control on the injection flow rate and cumulative volume is obtained by a hydraulic injection pump with variable piston rate, and a highly sensitive flow-meter. These aspects highly reduce measurement-related uncertainties of stress determination. Commissioning testing and initial field tests are scheduled to occur in a 1200 m long borehole in crystalline rock during the autumn of 2017. We aim at presenting this new and unique stress measurement system and some test results from the initial field tests.

Rock burst governance of working face under igneous rock

NASA Astrophysics Data System (ADS)

Chang, Zhenxing; Yu, Yue

2017-01-01

As a typical failure phenomenon, rock burst occurs in many mines. It can not only cause the working face to cease production, but also cause serious damage to production equipment, and even result in casualties. To explore how to govern rock burst of working face under igneous rock, the 10416 working face in some mine is taken as engineering background. The supports damaged extensively and rock burst took place when the working face advanced. This paper establishes the mechanical model and conducts theoretical analysis and calculation to predict the fracture and migration mechanism and energy release of the thick hard igneous rock above the working face, and to obtain the advancing distance of the working face when the igneous rock fractures and critical value of the energy when rock burst occurs. Based on the specific conditions of the mine, this paper put forward three kinds of governance measures, which are borehole pressure relief, coal seam water injection and blasting pressure relief.

Northeast Church Rock Mine

EPA Pesticide Factsheets

Northeast Church Rock Mine, a former uranium mine 17 miles northeast of Gallup, NM in the Pinedale Chapter of the Navajo Nation. EPA is working with NNEPA to oversee cleanup work by United Nuclear Corporation, a company owned by General Electric (GE).

Geochemical Comparison of Four Cores from the Manson Impact Structure

NASA Technical Reports Server (NTRS)

Korotev, Randy L.; Rockow, Kaylynn M.; Jolliff, Bradley L.; Haskin, Larry A.; McCarville, Peter; Crossey, Laura J.

1996-01-01

Concentrations of 33 elements were determined in relatively unaltered, matrix-rich samples of impact breccia at approximately 3-m-depth intervals in the M-1 core from the Manson impact structure, Iowa. In addition, 46 matrix-rich samples from visibly altered regions of the M-7, M-8, and M-10 cores were studied, along with 42 small clasts from all four cores. Major element compositions were determined for a subset of impact breccias from the M-1 core, including matrix-rich impact-melt breccia. Major- and trace-element compositions were also determined for a suite of likely target rocks. In the M-1 core, different breccia units identified from lithologic examination of cores are compositionally distinct. There is a sharp compositional discontinuity at the boundary between the Keweenawan-shale-clast breccia and the underlying unit of impact-melt breccia (IMB) for most elements, suggesting minimal physical mixing between the two units during emplacement. Samples from the 40-m-thick IMB (M-1) are all similar to each other in composition, although there are slight increases in concentration with depth for those elements that have high concentrations in the underlying fragmental-matrix suevite breccia (SB) (e.g., Na, Ca, Fe, Sc), presumably as a result of greater clast proportions at the bottom margin of the unit of impact-melt breccia. The high degree of compositional similarity we observe in the impact-melt breccias supports the interpretation that the matrix of this unit represents impact melt. That our analyses show such compositional similarity results in part from our technique for sampling these breccias: for each sample we analyzed a few small fragments (total mass: approximately 200 mg) selected to be relatively free of large clasts and visible signs of alteration instead of subsamples of powders prepared from a large mass of breccia. The mean composition of the matrix-rich part of impact-melt breccia from the M-1 core can be modeled as a mixture of approximately 35% shale and siltstone (Proterozoic "Red Clastics"), 23% granite, 40% hornblende-biotite gneiss, and a small component (less than 2%) of mafic-dike rocks.

Aeolian Abrasion at the Curiosity Landing Site: Clues to the Role of Wind in Landscape Modification

NASA Astrophysics Data System (ADS)

Bridges, N. T.; Le Mouélic, S.; Hallet, B.; Newman, C. E.; Rice, M. S.; Blaney, D. L.; Calef, F. J.; Herkenhoff, K. E.; Langevin, Y.; Lewis, K. W.; Maurice, S.; Pinet, P. C.; Wiens, R. C.; de Pablo, M.; Renno, N. O.

2013-12-01

The broad scale geomorphology of Gale Crater reflects diverse aeolian processes, from airfall settling that likely deposited much of the upper and some of the lower units of Mt. Sharp, to evidence of extensive wind exhumation and removal of material exterior to the mound, to active dunes on the crater floor. The integrated effect of aeolian sand transport can also be examined on a much smaller scale by the study of ventifacts, rocks that have been abraded by windborne particles. A diversity of ventifacts are found along Curiosity's traverse through the upper 'hummocky' (HY) geomorphic unit and the lower Yellowknife Bay (YKB) sedimentary rocks. The textures are analogous to abrasion features found on Earth and include cm-scale facets, keels, elongated pits, grooves, flutes, and basal sills. High-resolution images from ChemCam's Remote Micro-Imager also show mm-scale lineations. Evidence of differential erosion is common, with HY conglomerates (e.g., Hottah, Link) and the YKB Sheepbed mudstone unit containing distinct wind tails in the lee of resistant pebbles, and bedding features within Rocknest 3, the YKB Shaler sandstone unit, and other layered rocks displaying prominent ridge-groove topography. ChemCam LIBS depth profile data so far show no strong evidence for chemical differences in the elemental composition between abraded and non-abraded surfaces (as determined from qualitative assessment), as might be expected if there were rock coatings or weathering rinds undergoing active abrasion. Preliminary measurements of ventifact texture and wind tail orientations indicate sandblasting in HY and YKB from predominantly southwesterly and northerly directions, respectively. Based on meso-scale models of current winds and REMS results, SW flow is uncommon whereas N winds are frequent. Compositional and textural information from the suite of MSL instruments indicate that HY rocks are dominated by various types of basalt (either as whole rocks or the resistant clasts in conglomerates), whereas YKB are basaltic clastic rocks, with the lower members impregnated with sulfate veins, and were easily drilled. The HY rocks are therefore likely more resistant to abrasion than those of YKB. Combined, these results indicate that ventifacts so far investigated by MSL record two wind regimes, one a long-term integrated record of rare, yet strong winds and the other more reflective of typical conditions.

50 CFR 622.75 - Harvest limitations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Coral Reefs of the Gulf of Mexico § 622.75 Harvest limitations. (a) Aquacultured live rock. In the Gulf EEZ: (1) Aquacultured live rock may be harvested only under a permit, as required under § 622.70(a)(2), and aquacultured live rock on a site may be harvested only by the person, or his or her employee...

50 CFR 622.75 - Harvest limitations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Coral Reefs of the Gulf of Mexico § 622.75 Harvest limitations. (a) Aquacultured live rock. In the Gulf EEZ: (1) Aquacultured live rock may be harvested only under a permit, as required under § 622.70(a)(2), and aquacultured live rock on a site may be harvested only by the person, or his or her employee...

FNF Construction Inc. Window Rock Airport Project: Coverage Under General Air Quality Permit for New or Modified Minor Source Cement Batch Plants in Indian Country

EPA Pesticide Factsheets

Approved Request for Coverage under General Air Quality Permit for New or Modified Minor Source Cement Batch Plants in Indian Country for FNF Construction Inc. Window Rock Airport Soil Cement Mixing Plant Project, Beacon Road, Window Rock, Arizona 86515.

Oceanic crust within the paleozoic Granjeno Schist, northeastern Mexico. Remnants of the Rheic and paleo-Pacific Ocean.

NASA Astrophysics Data System (ADS)

Torres Sanchez, Sonia Alejandra; Augustsson, Carita; Rafael Barboza Gudiño, Jose; Jenchen, Uwe; Torres Sanchez, Dario; Aleman Gallardo, Eduardo; Abratis, Michael

2015-04-01

Late Paleozoic metamorphic rocks in Mexico are related to the Laurentia-Gondwana collision in Carboniferous time, during Pangaea amalgamation. Vestiges of the Mexican Paleozoic continental configuration are present in the Granjeno Schist, the metamorphic basement of the Sierra Madre Oriental. Field work and petrographic analysis reveal that the Granjeno Schist comprises metamorphic rocks with both sedimentary (psammite, pelite, turbidite, conglomerate, black shale) and igneous (tuff, lava flows, pillow lava and ultramafic bodies) protoliths. The chlorite geothermometer and the presence of phengite in the metasedimentary units as well as 40Ar/39Ar ages on metavolcanic and metaultramafic rocks indicate that the Granjeno Schist was metamorphosed under sub-greenschist to greenschist facies with temperatures ranging from 250-345°C with 2.5 kbar during Carboniferous time (330±30 Ma). The presence of metabasalt, metacumulate, serpentinite and talc bodies suggests an oceanic tectonic setting for the evolution of the Granjeno Schist. Serpetinite rocks have mesh, granular and ribbon textures which indicate recrystallization and metasomatic events. The serpentinite rocks are enriched in the very large incompatible elements Cs, U, and Zr and depleted in Ba, Sr, Pb, Zr and Ce. Normalized REE patterns (LaN/YbN = 0.51 - 19.95 and LaN/SmN = 0.72 - 9.08) of the serpentinite and talc/soapstone are characteristic of peridotite from both suprasubduction and mid-ocean ridge zones. Serpentinite from the Granjeno Schist have spinel content which can reveal different stages of evolution in host serpentinite. The composition of chromite indicates that they belong to podiform chromite that may have crystallized from mid-ocean ridge magma. Al-chromite in the serpentinite is characterized by #Cr 0.48 to 0.55, which indicates a depleted mantle source affected by 17 to 18% of partial melting. The ferritchromite has #Cr values of 0.93 to 1.00 which indicates a metamorphic origin. Our study suggests at least two serpentinization stages. The first serpentinization stage is related to an ocean-floor environment. At this stage, mesh-textured serpentinite formed under static conditions under subgreenschist to greenschist conditions. The second serpentinization stage occurred under greenschist to low amphibole conditions. During this stage Cr-spinel progressively was replaced by ferritchromite with magnetite rims due to regional metamorphism. Tectonic contact of the serpentinite with metavolcanic and metasedimentary rocks indicates lithospheric mantle slivers juxtaposed during the metamorphism of the Granjeno Schist during Pennsylvanian time. This metamorphic event occurred in an active continental margin. It represents the last events of the southern closure of the Rheic Ocean and Permo-Carboniferous convergence of Pacific plates on the western margin of Pangea.

The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam on board Curiosity: Potassic Sedimentary Rocks, Gale Crater

DOE PAGES

Le Deit, L.; Mangold, N.; Forni, O.; ...

2016-05-13

The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. Furthermore, from ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K 2O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations then reveals that the mean K 2Omore » abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.« less

The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam on board Curiosity: Potassic Sedimentary Rocks, Gale Crater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Le Deit, L.; Mangold, N.; Forni, O.

The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. Furthermore, from ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K 2O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations then reveals that the mean K 2Omore » abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.« less

Studies of geology and hydrology in the Basin and Range Province, Southwestern United States, for isolation of high-level radioactive waste - Characterization of the Bonneville region, Utah and Nevada

USGS Publications Warehouse

Bedinger, M.S.; Sargent, K.A.; Langer, William H.

1990-01-01

The Bonneville region of the Basin and Range province in westcentral Utah and adjacent Nevada includes several basins lying south of the Great Salt Lake Desert. Physiographically, the region consists of linear, north-trending mountain ranges separated by valleys, many of which are closed basins underlain by thick sequences of fill. Surface drainage of open basins and ground-water flow is to the Great Salt Lake Desert. In structure and composition the ranges are faulted Paleozoic rocks, locally intruded by Mesozoic and Tertiary plugs and stocks. In the southern and northeastern parts of the region, volcanic rocks are widespread and form large parts of some mountain ranges. The Paleozoic sedimentary rocks include great thicknesses of carbonate rocks which compose a significant aquifer in the regionMedia considered to have potential for isolation of high-level radioactive waste in the region include intrusive rocks, such as granite; ash-flow tuff; and basalt and basaltic andesite lava flows. These rock types, basin fill, and possibly other rock types, may have potential as host media in the unsaturated zone. Quaternary tectonism in the region is evidenced by seismic activity, local areas of above-normal geothermal heat flow, Quaternary faulting, late Cenozoic volcanic activity, and active vertical crustal movement. The Bonneville region is part of a large ground-water flow system that is integrated partly through basin-fill deposits, but largely through an underlying carbonate-rock sequence. The region includes: (1) several topographically closed basins with virtually no local surface discharge that are drained by the underlying carbonate-rock aquifer; (2) closed basins with local surface discharge by evapotranspiration; and (3) basins open to the Great Salt Lake Desert that discharge by groundwater underflow and evapotranspiration. The carbonate-rock aquifer discharges to large springs in the Desert and in basins tributary to the Desert. The climate is arid to semiarid with the greatest precipitation in the mountain ranges. Most recharge probably occurs by infiltration of runoff as it leaves the mountains, although some recharge probably occurs directly to the carbonate rocks in the mountain areas. The concentration of dissolved solids in ground water is generally less than 500 milligrams per liter. Dissolved-solids concentrations increase in the Great Salt Lake Desert and in major valleys adjoining the Desert. The predominant chemical constituents in ground water are calcium, magnesium, and sodium bicarbonate. Chloride-type water is associated with the higher dissolved-solids content of water in and near the Great Salt Lake Desert. The majority of the mineral occurrences containing base- and precious-metal deposits in the Bonneville region are of Tertiary age. Fluorspar is the primary industrial mineral. Coal, oil, and gas have not been produced in significant amounts.

Rock specific hydraulic fracturing and matrix acidizing to enhance a geothermal system — Concepts and field results

NASA Astrophysics Data System (ADS)

Zimmermann, Günter; Blöcher, Guido; Reinicke, Andreas; Brandt, Wulf

2011-04-01

Enhanced geothermal systems (EGS) are engineered reservoirs developed to extract economic amounts of heat from low permeability and/or porosity geothermal resources. To enhance the productivity of reservoirs, a site specific concept is necessary to actively make reservoir conditions profitable using specially adjusted stimulation treatments, such as multi fracture concepts and site specific well path design. The results of previously performed stimulation treatments in the geothermal research well GtGrSk4/05 at Groß Schönebeck, Germany are presented. The reservoir is located at a 4100-4300 m depth within the Lower Permian of the NE German Basin with a bottom-hole temperature of 150 °C. The reservoir rock is classified by two lithological units from bottom to top: volcanic rocks (andesitic rocks) and siliciclastics ranging from conglomerates to fine-grained sandstones (fluvial sediments). The stimulation treatments included multiple hydraulic stimulations and an acid treatment. In order to initiate a cross-flow from the sandstone layer, the hydraulic stimulations were performed in different depth sections (two in the sandstone section and one in the underlying volcanic section). In low permeability volcanic rocks, a cyclic hydraulic fracturing treatment was performed over 6 days in conjunction with adding quartz in low concentrations to maintain a sustainable fracture performance. Flow rates of up to 150 l/s were realized, and a total of 13,170 m 3 of water was injected. A hydraulic connection to the sandstone layer was successfully achieved in this way. However, monitoring of the water level in the offsetting well EGrSk3/90, which is 475 m apart at the final depth, showed a very rapid water level increase due to the stimulation treatment. This can be explained by a connected fault zone within the volcanic rocks. Two gel-proppant treatments were performed in the slightly higher permeability sandstones to obtain long-term access to the reservoir rocks. During each treatment, a total of 100 ton of high strength proppants was injected with 500 m 3 of cross-linked gel. The subsequent production test in conjunction with flowmeter logging showed an improvement of productivity by a factor of more than 4. Due to assumed residual drilling mud (constituents: calcite, dolomite, and aragonite) in the near-wellbore vicinity, an acid matrix stimulation was performed thereafter using a coil tubing unit. The following nitrogen lift test demonstrated another increase of productivity by 30-50% to an overall increase by a factor of 5.5-6.2.

A Model for Generation of Martian Surface Dust, Soil and Rock Coatings: Physical vs. Chemical Interactions, and Palagonitic Plus Hydrothermal Alteration

NASA Technical Reports Server (NTRS)

Bishop, J. L.; Murchie, S.; Pieters, C.; Zent, A.

1999-01-01

This model is one of many possible scenarios to explain the generation of the current surface material on Mars using chemical, magnetic and spectroscopic data from Mars and geologic analogs from terrestrial sites. One basic premise is that there are physical and chemical interactions of the atmospheric dust particles and that these two processes create distinctly different results. Physical processes distribute dust particles on rocks, forming physical rock coatings, and on the surface between rocks forming soil units; these are reversible processes. Chemical reactions of the dust/soil particles create alteration rinds on rock surfaces or duricrust surface units, both of which are relatively permanent materials. According to this model the mineral components of the dust/soil particles are derived from a combination of "typical" palagonitic weathering of volcanic ash and hydrothermally altered components, primarily from steam vents or fumeroles. Both of these altered materials are composed of tiny particles, about 1 micron or smaller, that are aggregates of silicates and iron oxide/oxyhydroxide/sulfate phases. Additional information is contained in the original extended abstract.

Preliminary Aeromagnetic Map of Joshua Tree National Park and Vicinity, Southern California

USGS Publications Warehouse

Langenheim, V.E.; Hill, P.L.

2010-01-01

This aeromagnetic map of Joshua Tree National Park and vicinity is intended to promote further understanding of the geology and structure in the region by serving as a basis for geophysical interpretations and by supporting geological mapping, water-resource investigations, and various topical studies. Local spatial variations in the Earth's magnetic field (evident as anomalies on aeromagnetic maps) reflect the distribution of magnetic minerals, primarily magnetite, in the underlying rocks. In many cases the volume content of magnetic minerals can be related to rock type, and abrupt spatial changes in the amount of magnetic minerals commonly mark lithologic or structural boundaries. Bodies of mafic and ultramafic rocks tend to produce the most intense magnetic anomalies, but such generalizations must be applied with caution because rocks with more felsic compositions, or even some sedimentary units, also can cause measurable magnetic anomalies. The database includes two ASCII files containing new aeromagnetic data and two ASCII files with point locations of the local maximum horizontal gradient derived from the aeromagnetic data. This metadata file describes the horizontal gradient locations derived from new and existing aeromagnetic data. This aeromagnetic map identifies magnetic features as a basis for geophysical interpretations; the gradients help define the edges of magnetic sources. This database updates geophysical information originally presented in smaller-scale formats and includes detailed aeromagnetic data collected by EON Geosciences, Inc.

Preliminary Geologic Map of the Thousand Oaks 7.5' Quadrangle, Southern California: A Digital Database

USGS Publications Warehouse

Yerkes, R.F.; Campbell, Russell H.

1995-01-01

Thousand Oaks is located in Arroyo Conejo, a region spanning both southeastern Ventura County and extreme northwest Los Angeles County in southern California. It was discovered in 1542 by Spanish explorer Juan Rodriquez Cabrillo and eventually became part of the Spanish Rancho El Conejo land grant (conejo means 'rabbit' in Spanish, of which there are many in the area). It is located in the Santa Monica Mountains in the northwestern part of the greater Los Angeles area. The area is bordered by the San Fernando Valley and the city of Los Angeles to the east, Simi Hills to the north, Las Posas Hills and the Santa Rosa Valley to the northwest, Conejo Mountain (also known as Conejo Hills) and Oxnard Plain to the west, and the Santa Monica Mountains and Malibu to the southwest. The geology of the surrounding Santa Monica Mountains is dominated by a sequence of Tertiary sedimentary and volcanic rocks. These include the Tertiary Modelo Formation and the upper part of the Topanga Formation, other minor Tertiary rocks, and Miocene volcanic and intrusive rocks of the Conejo Formation. The basement units within the Santa Monica Mountains are a series of Jurassic and Cretaceous sedimentary rocks. The volcanic rocks of the Conejo Formation underlies much of the surrounding watersheds. The younger Tertiary sedimentary Modelo and Upper Topanga Formations flank the Conejo to the north and south. On the north slope of the Santa Monica Mountains where the Arroyo Conejo and Thousand Oaks are located, the Tertiary formations are gently folded. The south flank of the Santa Monica Mountains is structurally dominated by the Malibu Coast Fault that runs along the foot of the mountains. This fault, and associated structures, creates a complex geologic setting on the south flank of the Santa Monica Mountains. The active nature of the Malibu Coast fault and associated structures accounts for the steep and rugged coastal topography. The most widely exposed rock units in the area are the Plio-Pleistocene marine and nonmarine Pico and Saugus formations, which crop out on the southern flank of South Mountain-Oak Ridge and on the Las Posas uplands and Las Posas Hills. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southeast corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Formation into a local trough during Saugus time. Eroded from, and overlying, these bedrock formations are a series of recent alluvial units. These alluvial units include Quaternary alluvium comprised of alluvium, stream deposits, alluvial fan and floodplain deposits, beach deposits, dissected older alluvial deposits. Also present are Quaternary landslides and colluvium composed of landslide deposits and colluvium deposits. The colluvium represents relatively thick continuous deposits of soil and rock fragments that are common on the steep slopes of the coastal canyons, and generally feed the many landslides, soil slips, and debris flows.

Metamorphic waters from the pacific tectonic belt of the west coast of the United States

USGS Publications Warehouse

Barnes, I.

1970-01-01

Waters unusually rich in ammonia, boron, carbon dioxide, hydrogen sulfide, and hydrocarbons are found in more than 100 localities along the Pacific coast of the United States. The waters are believed to be products of low-grade metamorphism of marine sediments. The marine sedimentary rocks would have to be tectonically emplaced below crystalline rocks in many places. Mercury are deposits are probably also products of the low-grade metamorphism.

The Cycladic Blueschist Belt in the Central Aegean Sea: Resolving the Interplay between Alpine Orogeny and Back-arc Extension

NASA Astrophysics Data System (ADS)

Avigad, D.

2007-12-01

The Aegean Sea, formed via extensional tectonics and floored by an attenuated continental crust, overprinted and dissected a once-continuous Alpine orogenic belt that stretched from mainland Greece to Anatolia. The Cycladic islands, in the central Aegean region, mainly comprise HP-LT metamorphic rocks (and their greenschist-facies derivatives) whose P-T conditions range at 12-15 kbars and 450-500 °C, straddling the blueschist-eclogite facies boundary. The protoliths are supracrustals metavolcanics and volcanoclastics alongside thick marble units that were deposited on the Pindos basin margin. Locally, such as on Syros and Sifnos, kilometer-thick, blueschist and eclogite-facies rocks are preserved intact allowing to explore the bottom of the orogenic edifice. 40Ar/39Ar ages of ~45Ma have been repeatedly obtained on Si rich phengites assessing the Eocene timing of the high-pressure metamorphism and crustal thickening. Upon decompression, the high- pressure rocks were overprinted in the greenschist-facies but locally as on Naxos migmatites were formed on the expense of eclogites at mid-crustal depth, at ~20 Ma. A series of granitoids penetrated the exhumed rock units during the Middle Miocene (until ~10Ma) in relation to whole-lithosphere back-arc extension.//The Cycladic blueschist belt, in the core of the extending Aegean region, is a suitable site to analyze the interplay between Mediterranean-type back-arc extension and the exhumation of the high-pressure metamorphic rocks. The Cycladic blueschist unit is sandwiched between lower pressure rocks: it is topped by greenschist- and amphibolite facies metamorphic rocks comprising metavolcanics interleaved with metamorphosed ultrabasic slices. The tectonic contact is a low-angle extensional detachment of significant lateral dimension and kinematic markers usually portray top-to-the-North sense of motion. Being stitched by mid-Miocene granitoids this is the oldest extensional discontinuity observed in the central Aegean. Where the original architecture of the Alpine orogenic belt was not severely obliterated, such as on Evia, a basal unit (Almyropotamos window) is exposed below the Cycladic blueschists unit. Within the basal unit, the presence of relict glaucophane and Si-rich phengite attest for a LT-HP metamorphism, but carbonates still preserve Lutetian nummullites indicating the basal unit metamorphism outlasted the Middle Eocene as well as cooling of the overlying Cycladic blueschists. The Cycladic blueschist unit is thus allochtonous on a regional scale: it was accreted into the orogenic wedge sometimes after the mid-Eocene. The time interval between the Eocene peak of eclogite metamorphism and the onset of back-arc extension in the Oligo-Miocene involved thrusting and contraction. In the central Aegean, the entire inventory of extensional structures operated subsequently to the emplacement of the Cycladic blueschist unit onto lower pressure sequences implying whole-lithosphere back-arc extension overprinted an Alpine orogen containing eclogites at relatively shallow structural levels. This resembles the mode of occurrence of eclogites in other mountain belts where back-arc extension played no role. Remarkably, despite significant crustal stretching only minor lateral metamorphic breaks can be identified in the Cyclades and the 12-15 kbar level of the former orogen are pervasively exposed over much of the archipelago.

Characterizing the natural radiation levels throughout the main geological units of Sabkhat al Jabboul area, northern Syria.

PubMed

Al-Hilal, Mohamed; Aissa, Mosa

2015-02-01

The concentrations of equivalent eU, eTh, and K% were determined together with soil gas radon values and carborne gamma-ray survey in order to define the natural radioactivity levels throughout main geological units of Sabkhat al Jabboul region. Forty five soil and rock samples were collected from various lithofacies in each geological unit, and analyzed by γ-ray spectrometric technique for determining the concentration values of major radioelements. Such radiometric data could be used to differentiate between various lithologies of the investigated rocks. Although no distinct radioactive anomalies were found in the area, the radiometric profiles showed some minor variations with slightly higher values than the normal level. Despite the low radioactivity and the lack of rocks diversity in the surveyed area, it was possible to classify some certain rock types based on their radiometric response. The relationships between eU, eTh and their ratios were discussed for the Quaternary, Neogene and Paleogene formations, in order to evaluate the degree of uranium distribution and remobilization. The overall results of this radiometric survey were generally low, and lying within the range of the normal background levels in Syrian. Copyright © 2014 Elsevier Ltd. All rights reserved.

Ground-Water Geology and Hydrology of the Kern River Alluvial-Fan Area, California

USGS Publications Warehouse

Dale, R.H.; French, James J.; Gordon, G.V.

1966-01-01

The Kern River alluvial fan is the southernmost major alluvial fan built by the streams which drain the west side of the Sierra Nevada. The climate is semiarid with rainfall near 5 inches per year. Agricultural development within the area uses over half the 700,000 acre-feet per year flow of the Kern River, plus a considerable amount drawn from the ground-water reservoir particularly during periods of low flow. The area overlies a deep structural trough between crystalline rocks of the Sierra Nevada and the marine rocks of Tertiary age of the Coast Ranges. The top horizon of the marine rocks that lap on the Sierra Nevada block underlies the report area at an average depth of 2,000 feet. The overlying continental deposits that form the groundwater reservoir consist of alluvial-fan and lacustrine deposits. The continental deposits are subdivided into three lithologic units on the basis of grain size and sorting. The gravel and clay unit consists of older alluvial-fan material, of both Sierra Nevada and Coast Range provenance, that shows extremely poor sorting with some diagenetic decomposition through chemical weathering. The fine sand to clay unit consists principally of fine sand, silt, and clay deposited in a lacustrine environment, although some of the unit is of alluvial-fan origin derived from poorly consolidated marine shale of the Coast Ranges. Within the fine sand to clay unit three distinct clays, which affect ground-water conditions, can be recognized. The gravel to medium sand unit consists of unweathered alluvial-fan material that shows much better sorting than the gravel and clay unit. In the eastern part of the area the basal part of this unit is a gravel lentil that can be traced in the subsurface more than 250 square miles. The overlying deposits consist principally of medium sand. In the western part of the area the unit is a heterogeneous gravel and sand unit. Permeability in Meinzer units of the gravel and clay unit ranges between 10 and 100 with specific yield about 5 percent. For the fine sand to clay unit the permeability ranges between 0.0001 and 100 with about 10 percent specific yield. The gravel to medium sand unit has permeabilities between 100 and 10,000, and specific yield is about 15 percent. For the period 1955-59 the annual gross surface-water supply was estimated at 421,000 acre-feet and pumpage was 664,000 acre-feet, giving a rounded total supply of 1,100,000 acre-feet. Annual consumptive use was estimated at 750,000 acre-feet and annual infiltration at 350,000 acre-feet. The approximate 300,000 acre-feet difference between 664,000 acre-feet pumped and 350,000 acre-feet infiltrated has caused an annual decline in water levels of up to 7 feet. Ground water occurs under both unconfined and confined conditions within the report area. In general, the gravel to medium sand unit contains unconfined water, and the other two units contain confined water. Pumping is less intense in the Kern River fan area than in the adjoining areas to the north or south. This fact, plus infiltration from the Kern River, results in ground-water movement being principally out of the area. There is a ground-water divide that approximately underlies the Kern River. South of the river the flow spreads out semicircularly from the river, and north of the river the flow is linear to the northwest. Based on chemical quality the ground water has been divided areally into (1) east side, (2) west side, and (3) axial water. With the exception of two areas of comparable size northwest of Bakersfield and a much smaller area southeast of that city where ground water is somewhat saline, east-side ground water is generally of the calcium bicarbonate and calcium sodium bicarbonate type of low to medium salinity. The chemical character of east-side ground water is necessarily related to that of Kern River water, the principal source of recharge, and water of intermittent streams which drain the dissected upland

Revised geologic cross sections of parts of the Colorado, White River, and Death Valley regional groundwater flow systems, Nevada, Utah, and Arizona

USGS Publications Warehouse

Page, William R.; Scheirer, Daniel S.; Langenheim, V.E.; Berger, Mary A.

2006-01-01

This report presents revisions to parts of seven of the ten cross sections originally published in U.S. Geological Survey Open-File Report 2006-1040. The revisions were necessary to correct errors in some of the original cross sections, and to show new parts of several sections that were extended and (or) appended to the original section profiles. Revisions were made to cross sections C-C', D-D', E-E', F-F', G-G', I-I', and J-J', and the parts of the sections revised or extended are highlighted below the sections on plate 1 by red brackets and the word "revised," or "extended." Sections not listed above, as well as the interpretive text and figures, are generally unchanged from the original report. Cross section C-C' includes revisions in the east Mormon Mountains in the east part of the section; D-D' includes revisions in the Mormon Mesa area in the east part of the section; E-E' includes revisions in the Muddy Mountains in the east part of the section; F-F' includes revisions from the Muddy Mountains to the south Virgin Mountains in the east part of the section; and J-J' includes some revisions from the east Mormon Mountains to the Virgin Mountains. The east end of G-G' was extended about 16 km from the Black Mountains to the southern Virgin Mountains, and the northern end of I-I' was extended about 45 km from the Muddy Mountains to the Mormon Mountains, and revisions were made in the Muddy Mountains part of the original section. This report contains 10 interpretive cross sections and an integrated text describing the geology of parts of the Colorado, White River, and Death Valley regional groundwater flow systems in Nevada, Utah, and Arizona. The primary purpose of the report is to provide geologic framework data for input into a numerical groundwater model. Therefore, the stratigraphic and structural summaries are written in a hydrogeologic context. The oldest rocks (basement) are Early Proterozoic metamorphic and intrusive crystalline rocks that are considered confining units because of their low permeability. Late Proterozoic to Lower Cambrian clastic units overlie the crystalline rocks and are also considered confining units within the regional flow systems. Above the clastic units are Middle Cambrian to Lower Permian carbonate rocks that are the primary aquifers in the flow systems. The Middle Cambrian to Lower Permian carbonate rocks are overlain by a sequence of mainly clastic rocks of late Paleozoic to Mesozoic age that are mostly considered confining units, but they may be permeable where faulted. Tertiary volcanic and plutonic rocks are exposed in the northern and southern parts of the study area. In the Clover and Delamar Mountains, these rocks are highly deformed by north- and northwest-striking normal and strike-slip faults that are probably important conduits in transmitting groundwater from the basins in the northern Colorado and White River flow systems to basins in the southern part of the flow systems. The youngest rocks in the region are Tertiary to Quaternary basin-fill deposits. These rocks consist of middle to late Tertiary sediments consisting of limestone, conglomerate, sandstone, tuff, and gypsum, and younger Quaternary surficial units consisting of alluvium, colluvium, playa deposits, and eolian deposits. Basin-fill deposits are both aquifers and aquitards. The rocks in the study area were complexly deformed by episodes of Mesozoic compression and Cenozoic extensional tectonism. Some Cretaceous thrust faults and folds of the Sevier orogenic belt form duplex zones and define areas of maximum thickness for the Paleozoic carbonate rocks. Cenozoic faults are important because they are the primary structures that control groundwater flow in the regional flow systems.

Petroleum geology and resources of the Dnieper-Donets Basin, Ukraine and Russia

USGS Publications Warehouse

Ulmishek, Gregory F.

2001-01-01

The Dnieper-Donets basin is almost entirely in Ukraine, and it is the principal producer of hydrocarbons in that country. A small southeastern part of the basin is in Russia. The basin is bounded by the Voronezh high of the Russian craton to the northeast and by the Ukrainian shield to the southwest. The basin is principally a Late Devonian rift that is overlain by a Carboniferous to Early Permian postrift sag. The Devonian rift structure extends northwestward into the Pripyat basin of Belarus; the two basins are separated by the Bragin-Loev uplift, which is a Devonian volcanic center. Southeastward, the Dnieper-Donets basin has a gradational boundary with the Donbas foldbelt, which is a structurally inverted and deformed part of the basin. The sedimentary succession of the basin consists of four tectono-stratigraphic sequences. The prerift platform sequence includes Middle Devonian to lower Frasnian, mainly clastic, rocks that were deposited in an extensive intracratonic basin. 1 The Upper Devonian synrift sequence probably is as thick as 4?5 kilometers. It is composed of marine carbonate, clastic, and volcanic rocks and two salt formations, of Frasnian and Famennian age, that are deformed into salt domes and plugs. The postrift sag sequence consists of Carboniferous and Lower Permian clastic marine and alluvial deltaic rocks that are as thick as 11 kilometers in the southeastern part of the basin. The Lower Permian interval includes a salt formation that is an important regional seal for oil and gas fields. The basin was affected by strong compression in Artinskian (Early Permian) time, when southeastern basin areas were uplifted and deeply eroded and the Donbas foldbelt was formed. The postrift platform sequence includes Triassic through Tertiary rocks that were deposited in a shallow platform depression that extended far beyond the Dnieper-Donets basin boundaries. A single total petroleum system encompassing the entire sedimentary succession is identified in the Dnieper-Donets basin. Discovered reserves of the system are 1.6 billion barrels of oil and 59 trillion cubic feet of gas. More than one-half of the reserves are in Lower Permian rocks below the salt seal. Most of remaining reserves are in upper Visean-Serpukhovian (Lower Carboniferous) strata. The majority of discovered fields are in salt-cored anticlines or in drapes over Devonian horst blocks; little exploration has been conducted for stratigraphic traps. Synrift Upper Devonian carbonate reservoirs are almost unexplored. Two identified source-rock intervals are the black anoxic shales and carbonates in the lower Visean and Devonian sections. However, additional source rocks possibly are present in the deep central area of the basin. The role of Carboniferous coals as a source rock for gas is uncertain; no coal-related gas has been identified by the limited geochemical studies. The source rocks are in the gas-generation window over most of the basin area; consequently gas dominates over oil in the reserves. Three assessment units were identified in the Dnieper-Donets Paleozoic total petroleum system. The assessment unit that contains all discovered reserves embraces postrift Carboniferous and younger rocks. This unit also contains the largest portion of undiscovered resources, especially gas. Stratigraphic and combination structural and stratigraphic traps probably will be the prime targets for future exploration. The second assessment unit includes poorly known synrift Devonian rocks. Carbonate reef reservoirs along the basin margins probably will contain most of the undiscovered resources. The third assessment unit is an unconventional, continuous, basin-centered gas accumulation in Carboniferous low-permeability clastic rocks. The entire extent of this accumulation is unknown, but it occupies much of the basin area. Resources of this assessment unit were not estimated quantitatively.

The Mohr-Coulomb criterion for intact rock strength and friction - a re-evaluation and consideration of failure under polyaxial stresses

NASA Astrophysics Data System (ADS)

Hackston, Abigail; Rutter, Ernest

2016-04-01

Darley Dale and Pennant sandstones were tested under conditions of both axisymmetric shortening and extension normal to bedding. These are the two extremes of loading under polyaxial stress conditions. Failure under generalized stress conditions can be predicted from the Mohr-Coulomb failure criterion under axisymmetric shortening conditions, provided the best form of polyaxial failure criterion is known. The sandstone data are best reconciled using the Mogi (1967) empirical criterion. Fault plane orientations produced vary greatly with respect to the maximum compressive stress direction in the two loading configurations. The normals to the Mohr-Coulomb failure envelopes do not predict the orientations of the fault planes eventually produced. Frictional sliding on variously inclined saw cuts and failure surfaces produced in intact rock samples was also investigated. Friction coefficient is not affected by fault plane orientation in a given loading configuration, but friction coefficients in extension were systematically lower than in compression for both rock types. Friction data for these and other porous sandstones accord well with the Byerlee (1978) generalization about rock friction being largely independent of rock type. For engineering and geodynamic modelling purposes, the stress-state-dependent friction coefficient should be used for sandstones, but it is not known to what extent this might apply to other rock types.

Surface Properties and Characteristics of Mars Landing Sites from Remote Sensing Data and Ground Truth

NASA Astrophysics Data System (ADS)

Golombek, M. P.; Haldemann, A. F.; Simpson, R. A.; Furgason, R. L.; Putzig, N. E.; Huertas, A.; Arvidson, R. E.; Heet, T.; Bell, J. F.; Mellon, M. T.; McEwen, A. S.

2008-12-01

Surface characteristics at the six sites where spacecraft have successfully landed on Mars can be related favorably to their signatures in remotely sensed data from orbit and from the Earth. Comparisons of the rock abundance, types and coverage of soils (and their physical properties), thermal inertia, albedo, and topographic slope all agree with orbital remote sensing estimates and show that the materials at the landing sites can be used as ground truth for the materials that make up most of the equatorial and mid- to moderately high-latitude regions of Mars. The six landing sites sample two of the three dominant global thermal inertia and albedo units that cover ~80% of the surface of Mars. The Viking, Spirit, Mars Pathfinder, and Phoenix landing sites are representative of the moderate to high thermal inertia and intermediate to high albedo unit that is dominated by crusty, cloddy, blocky or frozen soils (duricrust that may be layered) with various abundances of rocks and bright dust. The Opportunity landing site is representative of the moderate to high thermal inertia and low albedo surface unit that is relatively dust free and composed of dark eolian sand and/or increased abundance of rocks. Rock abundance derived from orbital thermal differencing techniques in the equatorial regions agrees with that determined from rock counts at the surface and varies from ~3-20% at the landing sites. The size-frequency distributions of rocks >1.5 m diameter fully resolvable in HiRISE images of the landing sites follow exponential models developed from lander measurements of smaller rocks and are continuous with these rock distributions indicating both are part of the same population. Interpretation of radar data confirms the presence of load bearing, relatively dense surfaces controlled by the soil type at the landing sites, regional rock populations from diffuse scattering similar to those observed directly at the sites, and root-mean-squared slopes that compare favorably with 100 m scale topographic slopes extrapolated from altimetry profiles and meter scale slopes from high-resolution stereo images. The third global unit has very low thermal inertia and very high albedo, indicating it is dominated by deposits of bright red atmospheric dust that may be neither load bearing nor trafficable. The landers have thus sampled the majority of likely safe and trafficable surfaces that cover most of Mars and show that remote sensing data can be used to infer the surface characteristics, slopes, and surface materials present at other locations.

Variscan tectonics in Dodecanese, Kalymnos island, Greece

NASA Astrophysics Data System (ADS)

Chatziioannou, Eleftheria; Grasemann, Bernhard; Schneider, David; Hubmann, Bernhard; Soukis, Konstantinos

2015-04-01

Kalymnos island is located in the Dodecanese, southeastern Aegean Sea, and geologically appears to be part of the external Hellenides. Pre-Alpidic basement rocks on the Dodecanese islands have been suggested to record compelling similarities with the basement rocks in Eastern Crete with respect to their lithologies and pre-Alpidic metamorphic evolution. The lithotectonic units experienced greenschist to amphibolite facies conditions during the Variscan orogeny. Whereas the rocks in Eastern Crete reveal Alpine high-pressure overprint, the Variscan basement units in the Dodecanese record no or low-grade Alpine metamorphism. A field study of basement rocks below Mesozoic limestones and dolomites in the NW part of Kalymnos near Emporios uncovered a complex history of metamorphism, folding and faulting. Three different tectonic units can be discriminated from top to bottom: a) a quartz-mica schist, b) a white-grey, fossiliferous coarse grained marble and c) a fine-grained fossiliferous blue-grey marble. In the marbles macrofossils such as brachiopods, ammonoid cephalopods (Goniatids?) and crinoids suggest a Middle-Upper Devonian deposition age (Givetian- Frasnian). Structural mapping the area resolved a dominant W-E shortening event, resulting in an overall inverted metamorphic gradient. The lowermost blue-grey marble unit is folded into large-scale upright folds, which are truncated by top-to-east overthrusting of the white-grey marble unit. Whereas deformation mechanisms in the blue-grey marble unit are dominated by dissolution-precipitation creep, the white-grey marble suffered intense crystal plastic deformation with localized high-strain mylonitic shear zones. The uppermost quartz-mica schist unit is separated from the lower units by a cataclastic phyllonitic shear zone. 40Ar/39Ar geochronological dating on white micas from the quartz-mica schists yielded cooling ages between 240 and 334 Ma indicative of Variscan cooling. Our data suggest that this part of the Dodecanese experienced intense Variscan deformation with no high-temperature Alpine overprint.

About the geologic map in the National Atlas of the United States of America

USGS Publications Warehouse

Reed, John C.; Bush, Charles A.

2007-01-01

Introduction The geologic map in the National Atlas of the United States of America shows the age, distribution, and general character of the rocks that underlie the Nation, including Alaska, Hawaii, Puerto Rico, and the Virgin Islands (but excluding other small island possessions). (The National Atlas of the United States can be accessed at URL http://nationalatlas.gov/natlas/Natlasstart.asp.) The map depicts the bedrock that lies immediately beneath soils or surficial deposits except where these deposits are so thick and extensive that the type of bedrock beneath them can only be inferred by deep drilling or geophysical methods, or both. Thus, it does not show the extensive glacial deposits of the North Central and Northeastern States, the deep residuum of the Southeastern and South Central States, the relatively thin alluvium along many major rivers and basins, and extensive eolian deposits on the high plains. However, it does show, in a general way, the thick alluvial deposits along the lower Mississippi River and on the Atlantic and Gulf Coastal Plains, and in the deep basins of the western cordillera. The rocks are classified as either sedimentary, volcanic, plutonic, or metamorphic, and their geologic ages are given in terms using a simplified version of the 1999 Geological Society of America geologic time scale. In some places rocks depicted as sedimentary are interlayered with volcanic rocks, including tuff, volcanic breccia, and volcanic flows. Conversely, many of the rocks shown as volcanic include interlayered sedimentary rocks. Plutonic rocks are classified by age and as granitic, intermediate, mafic, or ultramafic, but no similar classification has been attempted for the volcanic rocks in this version of the map. Where sedimentary or volcanic rocks have been metamorphosed but still retain clear evidence of their depositional age and origin, the extent of the metamorphism is shown by a pattern. Where the metamorphism has been so intense that the rocks bear little resemblance to the rocks from which they were derived, they are mapped as gneiss, but the age given is generally the age of the original rocks. The map in the National Atlas is a generalization of a new geologic map of North America that has recently been published by the Geological Society of America. The original compilation was prepared at a scale of 1:2,500,000 for publication at a scale of 1:5,000,000. This generalized version is intended for viewing at scales between about 1:10,000,000 and 1:7,500,000.

The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam Onboard Curiosity

USGS Publications Warehouse

Le Deit, Laetitia; Mangold, Nicolas; Forni, Olivier; Cousin, Agnes; Lasue, Jeremie; Schröder, Susanne; Wiens, Roger C.; Sumner, Dawn Y.; Fabre, Cecile; Stack, Katherine M.; Anderson, Ryan; Blaney, Diana L.; Clegg, Samuel M.; Dromart, Gilles; Fisk, Martin; Gasnault, Olivier; Grotzinger, John P.; Gupta, Sanjeev; Lanza, Nina; Le Mouélic, Stephane; Maurice, Sylvestre; McLennan, Scott M.; Meslin, Pierre-Yves; Nachon, Marion; Newsom, Horton E.; Payre, Valerie; Rapin, William; Rice, Melissa; Sautter, Violaine; Treiman, Alan H.

2016-01-01

The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. From ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K2O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations reveals that the mean K2O abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.

Ground-water provinces of Brazil

USGS Publications Warehouse

Schneider, Robert

1962-01-01

As part of a study of the status of investigations and development of ground water in Brazil, made under the auspices of the United States International Cooperation Administration and with the cooperation of the Government of Brazil, the country was divided into seven ground-water provinces. The identification and delineation of the provinces were based on the regional distribution of the dominant geologic units which are known or inferred to have distinctive water-bearing characteristics. Three of the provinces, covering most of the country, are underlain by Precambrian crystalline rocks. Three others coincide in part with four extensive sedimentary basins--the Parnaiba or Maranhfio basin and the contiguous Sao Francisco basin in the northeast and east, the Amazon basin in the north and northwest, and the Paranfi basin in the south and southwest. In addition, the narrow, discontinuous coastal plain is considered as a province. the occurrence of ground water is discussed briefly, and pertinent data are given on the more important aquifers, together with information on some existing wells. Because of the widespread distribution of crystalline rocks of low permeability, it is difficult in many areas to develop large or even adequate ground-water supplies. In general, satisfactory supplies of water are available in most of the rest of the country. Some problems include the relative deficiency of rainfall in the northeast together with the occurrence, in parts of this region, of mineralized water in the crystalline rocks. Also, there is a potential problem of excessive lowering of water levels and interference among wells in the intensively developed area of the city of Sao Paulo.

Tracking Down Batholith Construction Through Time Using Lobes From The Tuolumne Batholith, Sierra Nevada, CA.

NASA Astrophysics Data System (ADS)

Memeti, V.; Paterson, S. R.

2006-12-01

Data gained using various geologic tools from large, composite batholiths, such as the 95-85 Ma old Tuolumne Batholith (TB), Sierra Nevada, CA, indicate complex batholithic processes at the chamber construction site, in part since they record different increments of batholith construction through time. Large structural and compositional complexity generally occurs throughout the main batholith such as (1) geochemistry, (2) internal contacts between different units (Bateman, 1992; Zak &Paterson, 2005), (3) batholith/host rock contacts, (4) geochronology (Coleman et al., 2004; Matzel et al., 2005, 2006), and (5) internal structures such as schlieren layering and fabrics (Bateman, 1992; Zak et al., 2006) leading to controversies regarding batholith construction models. By using magmatic lobes tongues of individual batholithic units that extend into the host rock away from the main batholith we avoid some of the complexity that evolved over longer times within the main batholith. Magmatic lobes are "simpler" systems, because they are spatially separated from other units of the batholith and thus ideally represent processes in just one unit at the time of emplacement. Furthermore, they are shorter lived than the main batholith since they are surrounded by relatively cold host rock and "freeze in" (1) "snapshots" of batholith construction, and (2) relatively short-lived internal processes and resulting structures and composition in each individual unit. Thus, data from lobes of all batholith units representing different stages of a batholith's lifetime, help us to understand internal magmatic and external host rock processes during batholith construction. Based on field and analytic data from magmatic lobes of the Kuna Crest, Half Dome, and the Cathedral Peak granodiorites, we conclude that (1) the significance of internal processes in the lobes (fractionation versus mixing versus source heterogeneity) is unique for each individual TB unit; (2) emplacement mechanisms such as stoping, downward flow or ductile deformation of host rock act in a very short period of time (only a few 100,000 yrs); and (3) a variety of different magmatic fabrics, formed by strain caused by magma flow, marginal effects, or regional stress, can be found in each lobe. These data lead to the conclusion that the size of the studied lobes indicate the minimum pulse size for TB construction and that fractionation crystallization, even though slightly varying in its magnitude, is an important internal process in each individual TB unit.

Rock Fracture Toughness Study Under Mixed Mode I/III Loading

NASA Astrophysics Data System (ADS)

Aliha, M. R. M.; Bahmani, A.

2017-07-01

Fracture growth in underground rock structures occurs under complex stress states, which typically include the in- and out-of-plane sliding deformation of jointed rock masses before catastrophic failure. However, the lack of a comprehensive theoretical and experimental fracture toughness study for rocks under contributions of out-of plane deformations (i.e. mode III) is one of the shortcomings of this field. Therefore, in this research the mixed mode I/III fracture toughness of a typical rock material is investigated experimentally by means of a novel cracked disc specimen subjected to bend loading. It was shown that the specimen can provide full combinations of modes I and III and consequently a complete set of mixed mode I/III fracture toughness data were determined for the tested marble rock. By moving from pure mode I towards pure mode III, fracture load was increased; however, the corresponding fracture toughness value became smaller. The obtained experimental fracture toughness results were finally predicted using theoretical and empirical fracture models.

FY15 Report on Thermomechanical Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Francis D.; Buchholz, Stuart

2015-08-01

Sandia is participating in the third phase of a United States (US)-German Joint Project that compares constitutive models and simulation procedures on the basis of model calculations of the thermomechanical behavior and healing of rock salt (Salzer et al. 2015). The first goal of the project is to evaluate the ability of numerical modeling tools to correctly describe the relevant deformation phenomena in rock salt under various influences. Among the numerical modeling tools required to address this are constitutive models that are used in computer simulations for the description of the thermal, mechanical, and hydraulic behavior of the host rockmore » under various influences and for the long-term prediction of this behavior. Achieving this goal will lead to increased confidence in the results of numerical simulations related to the secure disposal of radioactive wastes in rock salt. Results of the Joint Project may ultimately be used to make various assertions regarding stability analysis of an underground repository in salt during the operating phase as well as long-term integrity of the geological barrier in the post-operating phase A primary evaluation of constitutive model capabilities comes by way of predicting large-scale field tests. The Joint Project partners decided to model Waste Isolation Pilot Plant (WIPP) Rooms B & D which are full-scale rooms having the same dimensions. Room D deformed under natural, ambient conditions while Room B was thermally driven by an array of waste-simulating heaters (Munson et al. 1988; 1990). Existing laboratory test data for WIPP salt were carefully scrutinized and the partners decided that additional testing would be needed to help evaluate advanced features of the constitutive models. The German partners performed over 140 laboratory tests on WIPP salt at no charge to the US Department of Energy (DOE).« less

Sedimentology of the lower Karoo Supergroup fluvial strata in the Tuli Basin, South Africa

NASA Astrophysics Data System (ADS)

Bordy, Emese M.; Catuneanu, Octavian

2002-11-01

The Karoo Supergroup in the Tuli Basin (South Africa) consists of a sedimentary sequence (˜450-500 m) composed of four stratigraphic units, namely the informal Basal, Middle and Upper Units, and the formal Clarens Formation. The units were deposited in continental settings from approximately Late Carboniferous to Middle Jurassic. This paper focuses on the ˜60-m-thick Basal Unit, which was examined in terms of sedimentary facies and palaeo-environments based on evidence provided by primary sedimentary structures, palaeo-flow measurements, palaeontological findings, borehole data (59 core descriptions) and stratigraphic relations. Three main facies associations have been identified: (i) gravelstone (breccias and conglomerate-breccias), (ii) sandstone and (iii) fine-grained sedimentary rocks. The coarser facies are interpreted as colluvial fan deposits, possibly associated with glaciogenic diamictites. The sandstone facies association is mainly attributed to channel fills of low sinuosity, braided fluvial systems. The coal-bearing finer-grained facies are interpreted as overbank and thaw-lake deposits, and represent the lower energy correlatives of the sandy channel fills. Sediment aggradation in this fluvio-lacustrine system took place under cold climatic conditions, with floating lake ice likely associated with lacustrine environments. Palaeo-current indicators suggest that the highly weathered, quartz-vein-rich metamorphic rock source of the Basal Unit was situated east-northeast of the study area. The accumulation of the Basal Unit took place within the back-bulge depozone of the Karoo foreland system. In addition to flexural subsidence, the amount of accommodation in this tectonic setting was also possibly modified by extensional tectonism in the later stages of the basin development. Based on sedimentological and biostratigraphic evidence, the coal-bearing fine-grained facies association displays strong similarities with the Vryheid Formation of the main Karoo Basin to the south. The lowermost non-fossiliferous breccias have been correlated before with the Dwyka Group in the main Karoo, and hence the Basal Unit may be regarded as the distal equivalent of the Dwyka and Ecca groups to the south.

Experimental Investigation on the Fatigue Mechanical Properties of Intermittently Jointed Rock Models Under Cyclic Uniaxial Compression with Different Loading Parameters

NASA Astrophysics Data System (ADS)

Liu, Yi; Dai, Feng; Dong, Lu; Xu, Nuwen; Feng, Peng

2018-01-01

Intermittently jointed rocks, widely existing in many mining and civil engineering structures, are quite susceptible to cyclic loading. Understanding the fatigue mechanism of jointed rocks is vital to the rational design and the long-term stability analysis of rock structures. In this study, the fatigue mechanical properties of synthetic jointed rock models under different cyclic conditions are systematically investigated in the laboratory, including four loading frequencies, four maximum stresses, and four amplitudes. Our experimental results reveal the influence of the three cyclic loading parameters on the mechanical properties of jointed rock models, regarding the fatigue deformation characteristics, the fatigue energy and damage evolution, and the fatigue failure and progressive failure behavior. Under lower loading frequency or higher maximum stress and amplitude, the jointed specimen is characterized by higher fatigue deformation moduli and higher dissipated hysteresis energy, resulting in higher cumulative damage and lower fatigue life. However, the fatigue failure modes of jointed specimens are independent of cyclic loading parameters; all tested jointed specimens exhibit a prominent tensile splitting failure mode. Three different crack coalescence patterns are classified between two adjacent joints. Furthermore, different from the progressive failure under static monotonic loading, the jointed rock specimens under cyclic compression fail more abruptly without evident preceding signs. The tensile cracks on the front surface of jointed specimens always initiate from the joint tips and then propagate at a certain angle with the joints toward the direction of maximum compression.

Classification and Distribution of Mars Pathfinder Rocks Using Quantitative Morphologic Indices

NASA Technical Reports Server (NTRS)

Yingst, R. A.; Biederman, K. L.; Monhead, A. M.; Haldemann, A. F. C.; Kowalczyk, M. R.

2004-01-01

The Mars Pathfinder (MPF) landing site was predicted to contain a broad sampling of rock types varying in mineralogical, physical, mechanical and geochemical characteristics. Although rocks have been divided into several spectral categories based on Imager for Mars Pathfinder visible/near-infrared spectra, it has not been fully determined which of these stem from intrinsic mineralogical differences between rocks or rock surfaces, and which result from factors such as physical or chemical weathering. This has made isolation of unique mineralogy's difficult. Efforts in isolating and classifying spectral units among MPF rocks and soils have met with varying degrees of success, and the current understanding is such that many factors influencing spectral signatures cannot be quantified to a sufficient level so they may be removed. The result is that fundamental questions regarding information needed to reveal the present and past interactions between the rocks and rock surfaces and the Martian environment remain unanswered. But it is possible to approach the issue of identifying distinct rock and rock surface types from a different angle.

LA-ICP-MS U-Pb detrital zircon study and structural observations of the Cycladic Blueschist Unit on Heraklia Island (Cyclades, Greece)

NASA Astrophysics Data System (ADS)

Laskari, Sofia; Soukis, Konstantinos; Lozios, Stylianos; Stockli, Daniel

2017-04-01

At the central and southern part of the Attic-Cycladic complex (Aegean Sea, Greece) significant exposures of the Cycladic Basement Unit orthogneisses and meta-sediments are observed. These are mainly cropping out in Paros, Naxos and Ios islands and to a much lesser extend in Sikinos Island and they comprise Variscan (granitic) orthogneisses and late Paleozoic metasediments. In this paper we present evidence of a hitherto not identified possible outcrop of the Cycladic Basement in Heraklia Island (central Cyclades). The small Heraklia Island, situated at the center of the Attic-Cycladic core complex in the Aegean, between the islands of Naxos and Ios, consists of rocks that are attributed to the Cycladic Blueschist Unit. The tectonostratigraphy of Heraklia Island includes: a) a lowermost schist sequence with interbedded lenses of felsic orthogneisses whose primary relationship is obliterated by later subduction and exhumation related shearing b) A 200m thick variegated marble sequence with sparse calk-schist intercalations, which is isoclinally folded together with 100m thick overlying quartz-mica and calc-schists schists. All rocks comprise a penetrative foliation formed by greenschist facies mineral assemblages but in the uppermost schists relics of the Eocene HP event are found in the form of glaucophane inclusions within albite porphyroblasts. A mylonitic planar fabric with a cataclastic overprint is observed at the base of the marble sequence and the roof of the underlying schists and orthogneisses. It is accompanied by a N-S stretching lineation, subparallel to isoclinal folding in all scales. Numerous kinematic indicators reveal a top-to-N sense of shear thus linking the Heraklia rocks kinematically with the crustal extensional detachment systems of both Naxos and Ios islands. LA-ICP-MS U-Pb detrital zircon study of schists and gneisses is used in order to identify provenance and to elucidate the tectonostratigrachic relationship between the lower and upper schists of the island. The lowermost schists are characterized by a Panafrican provenance and maximum deposition ages (MDA) that span from late Proterozoic in the schists to Triassic in the orthogneisses, whereas the upper quartz-mica schist sequence shows Variscan provenance and yielded a late Cretaceous maximum deposition age. Based on the above the lowermost sequence of Heraklia Island may represent a portion of the Cycladic Basement metasediments that's been intruded by felsic magmas in the Triassic. These rocks could be correlated with the carapace of the basement rocks in Ios Island.

Post-Panafrican late Proterozoic basins in the Central Anti-Atlas (Morocco): their influence on the Variscan contractional structures.

NASA Astrophysics Data System (ADS)

Guimerà, Joan; Arboleya, María. Luisa

2010-05-01

Located South of the High Atlas, in Morocco, The Anti-Atlas is a 700 km-long chain trending NE-SW. In the Central Anti-Atlas region, between Warzazat and Taznakht, the Proterozoic Pan-African basement (X1 to X2-3) crops out in isolated areas (boutonnières), where it is overlaid by late to post Pan-African Upper Proterozoic and Palaeozoic rocks. Late to post Pan-African Upper Proterozoic rocks (X3) have been classically divided into three units (X3i, X3m and X3s) which include volcanic rocks — mainly rhyolites— and continental siliciclastic rocks, the older units intruded by late granites (Choubert, 1952 and Choubert et al., 1970). Rocks belonging to the upper unit of post Pan-African Upper Proterozoic rocks (X3s) were deposited in basins bounded by faults with a dominant dip-slip normal motion; as a result, this unit have a variable thickness, being locally absent in the uplifted blocks. Uppermost Proterozoic (Adoudounian) and Palaeozoic rocks deposited unconformable on the older rocks in the Anti-Atlas. The Central Anti-Atlas was slightly deformed during the Variscan orogeny by folds and high-angle thrusts. Two areas are selected to study the post Pan-African to Variscan evolution of the area: the Tiwiyyine basin and the Anti-Atlas Major Fault. Tiwiyyine basin This basin is delimited by kilometric-scale normal faults. Three of them can be observed in the field: two striking NE-SW (NW and SE boundaries) and one striking NW-SE (SW boundary), while the NE boundary is covered by Cenozoic rocks. The basin fill reaches 725 m and has been divided into three units: 1. X3s1: Coarse conglomerates with basal breccias. 2. X3s2: Laminated dolomites at the base, red pelites and conglomerates. 3. X3s3: Conglomerates with interbedded andesites. Unit X3s2 passes laterally to the SW to unit X3s1. The thickness of the basin fill diminishes to the SE. This is specially visible at the basal X3s1 unit. At both sides of the two NE-SW-striking faults, only the upper X3s3 unit is found, while none of the three units is observed SW of the NW-SE- striking fault. The substratum of the X3s unit inside and outside the Tiwiyyine basin is the X3m unit. Extension along two NW-SE cross-sections is 7.2 % and 8.3 %. Along a section oriented NE-SW the calculated extension is 5.1 %, although only one boundary fault has been taken into account. During the Variscan orogeny the Tiwiyyine basin underwent a contractional deformation that caused the inversion of the normal faults bounding the basin, and the formation of folds parallel to them. The inversion of the two NE-SW-striking faults caused the substratum of the basin to crop out in their hanging wall. In the SW segment of the basin, the NW-SE fault was not inverted and the base of the Adoudounian still covers the fault. In the hanging wall of this fault a NW striking fold appeared, that beyond the basin becomes a SW-vergent reverse fault. A NW-SE syncline, visible in the Adoudounian rocks, formed to the SW, in the footwall of the fault. The horizontal shortening along the two NW-SE cross-sections is 14.8 % and 12.7 %. The shortening along the section oriented NE-SW is 2.8 %, although, as stated previously, only one boundary fault has been taken into account. From these data, horizontal shortening in all directions can be deduced, evidenced by the map recognition of sinusoidal fold traces and three-limb synclines. These patterns are typically the result of synchronous cross-folding with different amounts of shortening in different directions (Gosh and Ramberg, 1968). We interpret these structures to be originated by an unique episode of horizontal constriction. Anti-Atlas Major Fault The Anti-Atlas Major Fault (AMF) is a structure inherited from the Panafrican orogeny. It has been proposed even as the Panafrican continental suture (Leblanc, 1976). North of Taznakht the AMF appears as a North-dipping fault that experienced a normal slip during the sedimentation of the X3s unit, as can be deduced from the presence of this unit in its hanging-wall while it is absent in its footwall. Adoudounian and Palaeozoic rocks lie unconformable on both blocks of the fault, but they were affected by part of the normal slip of the AMF, which can be observed along several kilometres, putting in contact Adoudounian rocks in the hanging wall to X2 and X3i in the foot-wall. To the east, the AMF shows a reverse slip at surface, and the Adoudounian rocks of the hanging wall are thrust onto those of the footwall. The minimum Variscan shortening is estimated to be about 9% in a NNE-SSW direction. Summarizing, the AMF had two episodes of normal slip (one during the sedimentation of X3s and another involving the Palaeozoic rocks), and a late episode of reverse inversion during the Variscan orogeny. The Variscan reverse slip was less than the previous normal one, with only the Adoudounian level, in the eastern part of the sector studied, recuperating the previous downthrowing. REFERENCES Choubert, G. (1952): Histoire Géologique du domaine de l'Anti-Atlas. Géologie du Maroc, fasc. I. Service géologique, Notes et Mémoires, no 100, pp. 75-195. Casablanca. Choubert, G. et al. (1970): Carte Géologique de l'Anti-Atlas central et de la zone synclinale de Ouarzazate. Feuilles de Ouarzazate, Alougoum et Telouet Sud, ech. 1:200 000. Notes et Mémoires du Service Géologique du Maroc, 138. Gosh, S.K. and Ramberg, H. (1968): Buckling experiments of intersecting fold patterns. Tectonophysics, 5(2): 89-105. Le Blanc, M. (1976): Proterozoic oceanic crust at Bou Azzer. Nature, 261: 34-35.

Mick Jagger as Herodotus and Billy Joel as Thucydides? A Rock Music Perspective 1950-1985.

ERIC Educational Resources Information Center

Cooper, B. Lee

1985-01-01

Five "rock music as history" teaching units, each revolving around a particular socio-political theme, are presented. The themes are civil authorities, military involvements, the public education system, railroads, and representative government. (RM)

Spectrophotometric properties of materials observed by Pancam on the Mars Exploration Rovers: 2. Opportunity

USGS Publications Warehouse

Johnson, J. R.; Grundy, W.M.; Lemmon, M.T.; Bell, J.F.; Johnson, M.J.; Deen, R.; Arvidson, R. E.; Farrand, W. H.; Guinness, E.; Hayes, A.G.; Herkenhoff, K. E.; Seelos, F.; Soderblom, J.; Squyres, S.

2006-01-01

The Panoramic Camera (Pancam) on the Mars Exploration Rover Opportunity acquired visible/near-infrared multispectral observations of soils and rocks under varying viewing and illumination geometries that were modeled using radiative transfer theory to improve interpretations of the microphysical and surface scattering nature of materials in Meridiani Planum. Nearly 25,000 individual measurements were collected of rock and soil units identified by their color and morphologic properties over a wide range of phase angles (0-150??) at Eagle crater, in the surrounding plains, in Endurance crater, and in the plains between Endurance and Erebus craters through Sol 492. Corrections for diffuse skylight incorporated sky models based on observations of atmospheric opacity throughout the mission. Disparity maps created from Pancam stereo images allowed inclusion of local facet orientation estimates. Outcrop rocks overall exhibited the highest single scattering albedos (???0.9 at 753 nm), and most spherule-rich soils exhibited the lowest (???0.6 at 753 nm). Macroscopic roughness among outcrop rocks varied but was typically larger than spherule-rich soils. Data sets with sufficient phase angle coverage (resulting in well-constrained Hapke parameters) suggested that models using single-term and two-term Henyey-Greenstein phase functions exhibit a dominantly broad backscattering trend for most undisturbed spherule-rich soils. Rover tracks and other compressed soils exhibited forward scattering, while outcrop rocks were intermediate in their scattering behaviors. Some phase functions exhibited wavelength-dependent trends that may result from variations in thin deposits of airfall dust that occurred during the mission. Copyright 2006 by the American Geophysical Union.

DEPOSITIONAL RELATIONS OF UMPQUA AND TYEE FORMATIONS (EOCENE), SOUTHWESTERN OREGON.

USGS Publications Warehouse

Molenaar, C.M.

1985-01-01

The Umpqua Formation (as herein restricted) consists of as much as 10,000 ft of mudstone, sandstone, and conglomerate of nonmarine to deep marine origin. A basaltic basement that underlies the sedimentary rocks in most of the area and was formerly included in the Umpqua is herein considered a separate unit and assigned to the Siletz River Volcanics. A proposal to subdivide the Umpqua into three unconformity-bounded formations in the area west of Roseburg, Oregon, is not recognized in this report because of questionable correlations and limited extent of some units. The Tyee Formation, which conformably overlies the Umpqua, is a predominantly sandstone unit about 6,000 ft thick, deposited in environments ranging from shallow marine and nonmarine deltaic on the south, to slope and deep marine basinal to the north. Deposition across the Umpqua-Tyee boundary contact represents a change in tectonic setting. Refs.

Context of ancient aqueous environments on Mars from in situ geologic mapping at Endeavour Crater

USGS Publications Warehouse

Crumpler, L.S.; Arvidson, R. E.; Bell, J.; Clark, B. C.; Cohen, B. A.; Farrand, W. H.; Gellert, Ralf; Golombek, M.; Grant, J. A.; Guinness, E.; Herkenhoff, Kenneth E.; Johnson, J. R.; Jolliff, B.; Ming, D. W.; Mittlefehldt, D. W.; Parker, T.; Rice, J. W.; Squyres, S. W.; Sullivan, R.; Yen, A. S.

2015-01-01

Using the Mars Exploration Rover Opportunity, we have compiled one of the first field geologic maps on Mars while traversing the Noachian terrain along the rim of the 22 km diameter Endeavour Crater (Latitude −2°16′33″, Longitude −5°10′51″). In situ mapping of the petrographic, elemental, structural, and stratigraphic characteristics of outcrops and rocks distinguishes four mappable bedrock lithologic units. Three of these rock units predate the surrounding Burns formation sulfate-rich sandstones and one, the Matijevic Formation, represents conditions on early Mars predating the formation of Endeavour Crater. The stratigraphy assembled from these observations includes several geologic unconformities. The differences in lithologic units across these unconformities record changes in the character and intensity of the Martian aqueous environment over geologic time. Water circulated through fractures in the oldest rocks over periods long enough that texturally and elementally significant alteration occurred in fracture walls. These oldest pre-Endeavour rocks and their network of mineralized and altered fractures were preserved by burial beneath impact ejecta and were subsequently exhumed and exposed. The alteration along joints in the oldest rocks and the mineralized veins and concentrations of trace metals in overlying lithologic units is direct evidence that copious volumes of mineralized and/or hydrothermal fluids circulated through the early Martian crust. The wide range in intensity of structural and chemical modification from outcrop to outcrop along the crater rim shows that the ejecta of large (>8 km in diameter) impact craters is complex. These results imply that geologic complexity is to be anticipated in other areas of Mars where cratering has been a fundamental process in the local and regional geology and mineralogy.

Petrographic and geochemical characterization of the Triassic and Jurassic magmatic and volcanic rocks of southeastern Ecuador

NASA Astrophysics Data System (ADS)

Villares, Fabián; Eguez, Arturo; Yanez, Ernesto

2014-05-01

Formely, the subandean zone in the southeastern Ecuador involved large volcanic and magmatic rocks included in the Misahualli Formation and Zamora batholith, both as expression of the Jurassic cal-alcaline volcanic arc. The aim of the project carried out by the INIGEMM (Instituto Nacional de Investigación Geológico Minero Metalúrgico) was discriminate the volcanic products including a continuous set going from basalts to ryolithes and volcanoclastic rocks. Geochemical characterization was done using representative 16 whole - rock chemical analysis. The oldest rocks of the investigated area called Pachicutza Unit, include greenish to black, massive basalts and basaltic andesites, locally showing pillows structures. The texture is aphanitic to microporphyritic with slight crystal growth of plagioclase and pyroxenes. The Unit include also local pyroclastic breccias and tuffs showing variable skarnification related to the intrusion of the jurassic Zamora Batholith. Two samples of basalts show tholeiitic affinity, corresponding to an N- MORB, probably representing an early stage in opening of a regional Triassic rift reported since Colombia to Peru in the Andes. These geochemical characteristics are similar to the amphibolites of Monte Olivo Unit in the Real Cordillera. The Jurassic large volcanic assembly of the Misahualli Formation was also differenciated. Basal volcanics include green, subporphyritic andesites and volcanic breccias possibly generated at an early stage of the volcanic arc, caused by a change of extensive to compressive regime. Continental volcano sedimentary and sedimentary rock were discriminate as Nueva Esperanza and Suarez Units, respectively. The volcanosedimentary sequence include massive to laminate tuffs and tuffites of intermediate composition. The sediments of the Suarez Unit include dominant conglomerats and sandstones of fluvial domain. The regional volcanic sequence is completed by the Las Peñas Unit that includes aphanitic to porphyritic andesites and coarse volcanic breccias. Three geochemical analysis of the lavas show andesitic composition, have medium to high-K calc-alkaline and represent the products of a subduction zone. All intrusions in the area were mapped as Zamora Batholith. Nevetheless, the field observations confirm a large Jurassic batholith but also other significant minor intrusion that intrudes the cretaceous sedimentary formations of the area. Thus, magmatic rocks in the area are named as Zamora batholithic complex. Petrography of the Zamora Batholith ranges from tonalite to monzo-granite with the same qualitative mineralogy. Rocks are composed by different proportions of plagioclase, amphibole, K-feldspar, quartz, biotite, opaques and epidote, as accessory minerals has zircon, sphene and apatite. Zamora Granitoids ranged from dioritic to granitic compositions ( 60.09 - . 73.6 wt % SiO2). The Zamora Granitoids have medium to high-K calc-alkaline and represent the products of a subduction zone. Products are generated within a magmatic arc in normal conditions of maturity. The Zamora Granitoids are I - type intrusions.

Life on Earth before 3.83 Ga? Carbonaceous Inclusions from Akilia (West Greenland)

NASA Astrophysics Data System (ADS)

Mojzsis, S. J.; Papineau, D.; Adam, J. D.; Harrison, T. M.

2005-12-01

The earliest records of life on Earth have been obscured by the intense metamorphism experienced by all known terranes older than ca. 3600 Ma; fragile microfossil shapes become obliterated, and chemical/isotopic biosignatures are potentially blurred, overprinted, mimicked or erased. Prior studies sought to overcome this dilemma utilizing chemofossils ~ biosignatures resistant to physical and chemical change since formation ~ in the search for possible traces of a biosphere in pre-3.8 Ga rocks. Interpreting the geology, age and origin of the oldest rocks is fraught with difficulty, yet new field- and laboratory-based techniques permit direct assessment of proposed evidence for early life in the >3.83 Ga paragneisses of the Akilia association in southern West Greenland. A comprehensive program of sampling guided by 1:100 scale mapping of these highly deformed units coupled with structural, geochemical and geochronological analyses, provides a basis for understanding of the petrogenesis of the Akilia rocks (Manning et al., in press). The new studies resolve existing controversies over this complex terrane and (i) corroborate a sedimentary rather than metasomatic origin for Fe-rich quartz pyroxene ( Aqp) units as supported by separate trace element, REE, δ18O, δ33S/δ34S and δ56Fe isotope studies; (ii) validate a >3.83 Ga age for Aqp units on Akilia and related units in southern West Greenland as among the oldest known rocks of sedimentary origin; and (iii) verify the presence of apatite-hosted graphite in Aqp units (cf. Lepland et al., 2005; Moorbath, 2005). This growing list of results lend support to our original interpretation (Mojzsis et al., 1996) that the simplest explanation for depleted 13C in carbonaceous inclusions in apatite from Akilia is that life had emerged on Earth prior to 3.83 Ga. Manning, C.E., Mojzsis, S.J. and Harrison, T.M. (2005) Geology, age and origin of supracrustal rocks, Akilia, Greenland (Amer. J. Sci. in press).

Evidence for large-magnitude, post-Eocene extension in the northern Shoshone Range, Nevada, and its implications for Carlin-type gold deposits in the lower plate of the Roberts Mountains allochthon

USGS Publications Warehouse

Colgan, Joseph P.; Henry, Christopher D.; John, David A.

2014-01-01

The northern Shoshone and Toiyabe Ranges in north-central Nevada expose numerous areas of mineralized Paleozoic rock, including major Carlin-type gold deposits at Pipeline and Cortez. Paleozoic rocks in these areas were previously interpreted to have undergone negligible postmineralization extension and tilting, but here we present new data that suggest major post-Eocene extension along west-dipping normal faults. Tertiary rocks in the northern Shoshone Range crop out in two W-NW–trending belts that locally overlie and intrude highly deformed Lower Paleozoic rocks of the Roberts Mountains allochthon. Tertiary exposures in the more extensive, northern belt were interpreted as subvertical breccia pipes (intrusions), but new field data indicate that these “pipes” consist of a 35.8 Ma densely welded dacitic ash flow tuff (informally named the tuff of Mount Lewis) interbedded with sandstones and coarse volcaniclastic deposits. Both tuff and sedimentary rocks strike N-S and dip 30° to 70° E; the steeply dipping compaction foliation in the tuffs was interpreted as subvertical flow foliation in breccia pipes. The southern belt along Mill Creek, previously mapped as undivided welded tuff, includes the tuff of Cove mine (34.4 Ma) and unit B of the Bates Mountain Tuff (30.6 Ma). These tuffs dip 30° to 50° east, suggesting that their west-dipping contacts with underlying Paleozoic rocks (previously mapped as depositional) are normal faults. Tertiary rocks in both belts were deposited on Paleozoic basement and none appear to be breccia pipes. We infer that their present east tilt is due to extension on west-dipping normal faults. Some of these faults may be the northern strands of middle Miocene (ca. 16 Ma) faults that cut and tilted the 34.0 Ma Caetano caldera ~40° east in the central Shoshone Range (

Noble Gas Release Signal as a Precursor to Fracture

NASA Astrophysics Data System (ADS)

Bauer, S. J.; Lee, H.; Gardner, W. P.

2017-12-01

We present empirical results of rock strain, microfracturing, acoustic emissions, and noble gas release from laboratory triaxial experiments for a granite, basalt, shale and bedded rock salt. Noble gases are released and measured real-time during deformation using mass spectrometry. The gas release represents a precursive signal to macrofracture. Gas release is associated with increased acoustic emissions indicating that microfracturing is required to release gas and create pathways for the gas to be sensed. The gas released depends on initial gas content, pore structure and its evolution during deformation, the deformation amount, matrix permeability, deformation style and the stress/strain history. Gases are released from inter and intracrystalline sites; release rate increases as strain and microfracturing increases. The gas composition depends on lithology, geologic history and age, fluids present, and radioisotope concentrations that affect radiogenic noble gas isotope (e.g. 4He,40Ar) production. Noble gas emission and its relationship to crustal processes such as seismicity and volcanism, tectonic velocities, qualitative estimates of deep permeability, age dating of groundwater, and a signature of nuclear weapon detonation. Our result show that mechanical deformation of crustal materials is an important process controlling gas release from rocks and minerals, and should be considered in techniques which utilize gas release and/or accumulation. We propose using noble gas release to signal rock deformation in boreholes, mines and waste repositories. We postulate each rock exhibits a gas release signature which is microstructure, stress, strain, and/or permanent deformation dependent. Calibration of such relationships, for example relating gas release per rock unit volume to strain may be used to quantify rock deformation and develop predictive models.Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525. SAND2017-7823A

Chemical composition of sedimentary rocks in California and Hawaii

USGS Publications Warehouse

Hill, Thelma P.

1981-01-01

A compilation of published chemical analyses of sedimentary rocks of the United States was undertaken by the U.S. Geological Survey in 1952 to make available scattered data that are needed for a wide range of economic and scientific uses. About 20,000-25,000 chemical analyses of sedimentary rocks in the United States have been published. This report brings together 2,312 of these analyses from California and Hawaii. The samples are arranged by general lithologic characteristics and locality. Indexes of stratigraphy, rock name, commercial uses, and minor elements are provided. The sedimentary rocks are classified into groups and into categories according to the chemical analyses. The groups (A through F2) are defined by a system similar to that proposed by Brian Mason in 1952, in which the main parameters are the three major components of sedimentary rocks: (1) uncombined silica, (2) clay (R203 ? 3Si02 ? nH20), and (3) calcium-magnesium carbonate. The categories are based on the degree of admixture of these three major components with other components, such as sulfate, phos- phate, and iron oxide. Common-rock, mixed-rock, and special-rock categories apply to rocks consisting of 85 percent or more, 50-84 percent, and less than 49 percent, respectively, of the three major components combined. Maps show distribution of sample localities by States; triangular diagrams show the lithologic characteristics and classification groups. Cumulative-frequency curves of each constituent in each classification group of the common-rock and mixed-rock categories are also included. The numerous analyses may not adequately represent the geochemical nature of the rock types and formations of the region because of sampling bias. Maps showing distribution of sample localities indicate that many of the localities are in areas where, for economic or other reasons, special problems attracted interest. Most of the analyzed rocks tended to be fairly simple in composition - mainly mixtures of just two of the three major components or a mixture of these and a fourth component such as phosphate, gypsum, or iron oxide.

Assessment of Undiscovered Oil and Gas Resources of the Uinta-Piceance Province of Colorado and Utah, 2002

USGS Publications Warehouse

,

2002-01-01

The U.S. Geological Survey (USGS) recently completed an assessment of the undiscovered oil and gas potential of the UintaPiceance Province of northwestern Colorado and northeastern Utah (fig. 1). The assessment of the Uinta-Piceance Province is geology based and uses the Total Petroleum System concept. The geologic elements of Total Petroleum Systems include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy, petrophysical properties), and hydrocarbon traps (trap formation and timing). Using this geologic framework, the USGS defined five Total Petroleum Systems and 20 Assessment Units within these Total Petroleum Systems, and quantitatively estimated the undiscovered oil and gas resources within each Assessment Unit (table 1).

True Triaxial Strength and Failure Modes of Cubic Rock Specimens with Unloading the Minor Principal Stress

NASA Astrophysics Data System (ADS)

Li, Xibing; Du, Kun; Li, Diyuan

2015-11-01

True triaxial tests have been carried out on granite, sandstone and cement mortar using cubic specimens with the process of unloading the minor principal stress. The strengths and failure modes of the three rock materials are studied in the processes of unloading σ 3 and loading σ 1 by the newly developed true triaxial test system under different σ 2, aiming to study the mechanical responses of the rock in underground excavation at depth. It shows that the rock strength increases with the raising of the intermediate principal stress σ 2 when σ 3 is unloaded to zero. The true triaxial strength criterion by the power-law relationship can be used to fit the testing data. The "best-fitting" material parameters A and n ( A > 1.4 and n < 1.0) are almost located in the same range as expected by Al-Ajmi and Zimmerman (Int J Rock Mech Min Sci 563 42(3):431-439, 2005). It indicates that the end effect caused by the height-to-width ratio of the cubic specimens will not significantly affect the testing results under true triaxial tests. Both the strength and failure modes of cubic rock specimens under true triaxial unloading condition are affected by the intermediate principal stress. When σ 2 increases to a critical value for the strong and hard rocks (R4, R5 and R6), the rock failure mode may change from shear to slabbing. However, for medium strong and weak rocks (R3 and R2), even with a relatively high intermediate principal stress, they tend to fail in shear after a large amount of plastic deformation. The maximum extension strain criterion Stacey (Int J Rock Mech Min Sci Geomech Abstr 651 18(6):469-474, 1981) can be used to explain the change of failure mode from shear to slabbing for strong and hard rocks under true triaxial unloading test condition.

Exhumation rates in the Gran Paradiso Massif (Western Alps) constrained by in situ U-Th-Pb dating of accessory phases (monazite, allanite and xenotime)

NASA Astrophysics Data System (ADS)

Manzotti, Paola; Bosse, Valérie; Pitra, Pavel; Robyr, Martin; Schiavi, Federica; Ballèvre, Michel

2018-03-01

Exhumation rates for high-pressure metamorphic rocks need to be carefully estimated to decipher tectonic processes in subduction/collision belts. In the Gran Paradiso Massif (Western Alps), the Money Unit crops out as a tectonic window below the Gran Paradiso Unit. According to previous studies, the Gran Paradiso and Money Units reached peak pressure conditions at 18 to 20 kbar, 480-520 °C and 17 to 18 kbar, 500-550 °C, respectively. This yields a maximum difference of 9 to 10 km in the subduction depth reached by these two units during the Alpine history. Thrusting of the Gran Paradiso Unit over the Money Unit led to the simultaneous development of the main foliation under the same metamorphic conditions ( 12.5 to 14.5 kbar and 530-560 °C) in both units. The thrust contact was subsequently folded and then both units were exhumed together. The relative timing of the growth and dissolution of the accessory phases was assessed by combining thermodynamic modelling with inclusion, textural and chemical (major and trace element) data from both major and accessory phases. The age of monazite constrained the high-pressure metamorphism in both the Gran Paradiso Unit and the Money Unit at 41.5 ± 0.3 and 42.0 ± 0.6 Ma, respectively. Allanite replacing monazite in the matrix has been dated at 32.7 ± 4.2 Ma. The late growth of xenotime associated with the crystallization of biotite pseudomorphs at the expense of garnet (at about 10 kbar) was dated at 32.3 ± 1.0 Ma. Our petrochronological data indicate about 10 m.y. between the peak pressure conditions and the crystallization of xenotime leading to an exhumation rate of the order of 2.2-5 mm/year. The new ages allow to better constrain the timing of the displacement of the thrust defining the lower boundary of the extruding wedge of eclogite-facies rocks.

Contributions to the geology of uranium and thorium by the United States Geological Survey and Atomic Energy Commission for the United Nations International Conference on Peaceful Uses of Atomic Energy, Geneva, Switzerland, 1955

USGS Publications Warehouse

Page, Lincoln R.; Stocking, Hobart E.; Smith, Harriet B.

1956-01-01

Within the boundaries of the United States abnormal amounts of uranium have been found in rocks of nearly all geologic ages and lithologic types. Distribution of ore is more restricted. On the Colorado Plateau, the Morrison formation of Jurassic age yields 61.4 percent of the ore produced in the United States, and the Chinle conglomerate and Shinarump formation of Triassic age contribute 26.0 and 5.8 percent, respectively. Clastic, carbonaceous, and carbonate sedimentary rocks of Tertiary, Mesozoic, and Paleozoic ages and veins of Tertiary age are the source of the remaining 6.8 percent.

Statistical classification of hydrogeologic regions in the fractured rock area of Maryland and parts of the District of Columbia, Virginia, West Virginia, Pennsylvania, and Delaware

USGS Publications Warehouse

Fleming, Brandon J.; LaMotte, Andrew E.; Sekellick, Andrew J.

2013-01-01

Hydrogeologic regions in the fractured rock area of Maryland were classified using geographic information system tools with principal components and cluster analyses. A study area consisting of the 8-digit Hydrologic Unit Code (HUC) watersheds with rivers that flow through the fractured rock area of Maryland and bounded by the Fall Line was further subdivided into 21,431 catchments from the National Hydrography Dataset Plus. The catchments were then used as a common hydrologic unit to compile relevant climatic, topographic, and geologic variables. A principal components analysis was performed on 10 input variables, and 4 principal components that accounted for 83 percent of the variability in the original data were identified. A subsequent cluster analysis grouped the catchments based on four principal component scores into six hydrogeologic regions. Two crystalline rock hydrogeologic regions, including large parts of the Washington, D.C. and Baltimore metropolitan regions that represent over 50 percent of the fractured rock area of Maryland, are distinguished by differences in recharge, Precipitation minus Potential Evapotranspiration, sand content in soils, and groundwater contributions to streams. This classification system will provide a georeferenced digital hydrogeologic framework for future investigations of groundwater availability in the fractured rock area of Maryland.

Geochemical and multi-isotopic (87Sr/86Sr, 143Nd/144Nd, 238U/235U) perspectives of sediment sources, depositional conditions, and diagenesis of the Marcellus Shale, Appalachian Basin, USA

NASA Astrophysics Data System (ADS)

Phan, Thai T.; Gardiner, James B.; Capo, Rosemary C.; Stewart, Brian W.

2018-02-01

We investigate sediment sources, depositional conditions and diagenetic processes affecting the Middle Devonian Marcellus Shale in the Appalachian Basin, eastern USA, a major target of natural gas exploration. Multiple proxies, including trace metal contents, rare earth elements (REE), the Sm-Nd and Rb-Sr isotope systems, and U isotopes were applied to whole rock digestions and sequentially extracted fractions of the Marcellus shale and adjacent units from two locations in the Appalachian Basin. The narrow range of εNd values (from -7.8 to -6.4 at 390 Ma) is consistent with derivation of the clastic sedimentary component of the Marcellus Shale from a well-mixed source of fluvial and eolian material of the Grenville orogenic belt, and indicate minimal post-depositional alteration of the Sm-Nd system. While silicate minerals host >80% of the REE in the shale, data from sequentially extracted fractions reflect post-depositional modifications at the mineralogical scale, which is not observed in whole rock REE patterns. Limestone units thought to have formed under open ocean (oxic) conditions have δ238U values and REE patterns consistent with modern seawater. The δ238U values in whole rock shale and authigenic phases are greater than those of modern seawater and the upper crust. The δ238U values of reduced phases (the oxidizable fraction consisting of organics and sulfide minerals) are ∼0.6‰ greater than that of modern seawater. Bulk shale and carbonate cement extracted from the shale have similar δ238U values, and are greater than δ238U values of adjacent limestone units. We suggest these trends are due to the accumulation of chemically and, more likely, biologically reduced U from anoxic to euxinic bottom water as well as the influence of diagenetic reactions between pore fluids and surrounding sediment and organic matter during diagenesis and catagenesis.

Geology of the Plumtree area, Spruce Pine district, North Carolina

USGS Publications Warehouse

Brobst, Donald Albert

1953-01-01

This report describes the results of study and geologic mapping (1:12,000) in the 70-square-mile Plumtree area in the northeastern part of the Spruce Pine pegmatite district, on the Blue Ridge upland in western North Carolina. The district has been the chief domestic source of feldspar and sheet mica. The mining belt just west of the Blue Ridge Front trends northeast and is 25 miles long and 10 miles wide. The center of the Plumtree area lies 10 miles northeast of Spruce Pine pegmatite district, on the Blue Ridge upland in western North Carolina. The district has been the chief domestic source of feldspar and sheet mica. The mining belt just west of the Blue Ridge Front trends northeast and is 25 miles long and 10 miles wide. The center of the Plumtree area lies 10 miles northeast of Spruce Pine and includes parts of Mitchell and Avery Counties shown on the portions of the 7.5-minute Spruce Pine, Linville Falls, Newland, North Carolina, and Carvers Gap, North Carolina and Tennessee quadrangle. The topography varies from rugged mountains to rounded or flat topped hills near the entrenched, meandering master streams. Old erosion surfaces are approximately 600,1,100, 1,500, and 2,500 feet above the present master stream level. The area is in late youth or early maturity after rejuvenation.. The regionally metamorphosed rocks of the amophibolite facies form three mappable units: mica gneiss, mica schist, and hornblende rock. These rocks, perhaps of Precambrian age, are intimately interlayered with thicknesses of the individual layers ranging from less than one inch to several tons of feet. Field relationships and chemical data suggest that the mica (Carolina-type) rocks were derived from sandstones, graywackes, and shales and that the hornblende-rich (Roan-type) layers were derived from impure carbonate rocks. The igneous rocks include alaskite and associated pegmatite of early Paleozoic age (?), dunite and associated soapstone of a prepegmatite age, and a few diabasic dikes of post-pegmatite age (Triassic?). The alaskite and pegmatite have similar bulk compositions, notably low in iron (0.3 percent). The major constituents in order of decreasing abundance are plagioclase, perthitic microcline, quartz, and muncovite. All of these minerals, as well as clay deposits derived from the weathering of alaskite under old terraces, have economic value. The zoned pegmatites contain fewer zones which are less complex mineralogically than those in the pegmatites of many other areas. These essentially unmetamorphosed bodies were intruded approximately at the peak of the regional metamorphism. Their emplacement was controlled by local structure and rock type. The source of this igneous material may have been the mobilized portions of the Cranberry gneiss which underlies the area. The dunite bodies were intruded early in the metamorphic cycle. The bodies are commonly zoned: from the wall rock inwards (1) talc-antrophyllite-serpentine fringe, (3) serpentinized dunite, (3) granular olivine core. Dunite, chromite, vermiculite, and anthophyllite are the major economic commodities. Extensive hydrothermal alteration of dunite bodies produced soapstone. The area is the northeast end of a southwest plunging synclinorium about 20 miles wide with the steeper limb on the northwest side. There are three structural zones: zone I on the northwest is characterized by the northeast-trending isoclinal folds with steep southeast dips; zone II on the southwest includes an area of rocks with low and variable dip; zone III is the complex central core. In the extreme northeast zones I and II have an indistinct boundary where they coalesce along the rim of the synclinorium. Six stratigraphic units are exposed totaling approximately 10,500 feet of metamorphic rocks. Small scale structural features include a foliation, and a lineation in the planes of the foliation. Minor folding reflects the trends of the major structures. There are randomly orient

Geologic features of dam sites in the Nehalem, Rogue, and Willamette River basins, Oregon, 1935-37

USGS Publications Warehouse

Piper, A.M.

1947-01-01

The present report comprises brief descriptions of geologic features at 19 potential dam sites in the Nehalem, Rogue, and Willamette River basins in western Oregon. The topography of these site and of the corresponding reservoir site was mapped in 1934-36 under an allocation of funds, by the Public Works Administration for river-utilization surveys by the Conservation Branch of the United States Geological Survey. The field program in Oregon has been under the immediate charge of R. O. Helland. The 19 dam sites are distributed as follows: three on the Nehalem River, on the west or Pacific slope of the Oregon Coast range; four on Little Butte Creek and two on Evans Creek, tributaries of the Rogue River in the eastern part of the Klamath Mountains; four on the South and Middle Santiam Rivers, tributaries of the Willamette River from the west slope of the Cascade mountains; and six on tributaries of the Willamette River from the east slope of the Coast Range. Except in the Evans Creek basin, all the rocks in the districts that were studied are of comparatively late geological age. They include volcanic rocks, crystalline rocks of several types, marine and nonmarine sedimentary rocks, and recent stream deposits. The study of geologic features has sought to estimate the bearing power and water-tightness of the rocks at each dam site, also to place rather broad limits on the type of dam for which the respective sites seem best suited. It was not considered necessary to study the corresponding reservoir sites in detail for excessive leakage appears to be unlikely. Except at three of the four site in the Santiam River basin, no test pits have been dug nor exploratory holes drilled, so that geologic features have been interpreted wholly from natural outcrops and from highway and railroad cuts. Because these outcrops and cuts are few, many problems related to the construction and maintenance of dams can not be answered at the this time and all critical features of the sites should be thoroughly explored by test pits and drilled holes before any dam is designed. This applied especially to sites in the Nehalem and Willamette River basins where commonly the cover of timber and brush is dense and the rocks are rather deeply weathered. On the Middle Santiam and South Santiam Rivers, the Cascadia, Greenpeter, and Sweet Home sits have been studies intensively by the United States Engineer Department, whose work included exploration by diamond-drill holes and test pits. Their conclusions as to geologic features are given in a report by McKitrick and have been reviewed by the writer. Data from this source have been used freely in the discussion of the respective sites in this report. The probability of destructive earthquakes in the region appears to be small but is not negligible. Prudence suggests that any high dam should embody features to assure stability against moderately strong earth motions.

Rocks and geology in the San Francisco Bay region

USGS Publications Warehouse

Stoffer, Philip W.

2002-01-01

The landscape of the San Francisco Bay region is host to a greater variety of rocks than most other regions in the United States. This introductory guide provides illustrated descriptions of 46 common and important varieties of igneous, sedimentary, and metamorphic rock found in the region. Rock types are described in context of their identification qualities, how they form, and where they occur in the region. The guide also provides discussion about of regional geology, plate tectonics, the rock cycle, the significance of the selected rock types in relation to both earth history and the impact of mineral resources on the development in the region. Maps and text also provide information where rocks, fossils, and geologic features can be visited on public lands or in association with public displays in regional museums, park visitor centers, and other public facilities.

Timing and implications for the late Mesozoic geodynamic settings of eastern North China Craton: Evidences from K-Ar dating age and sedimentary-structural characteristics records of Lingshan Island, Shandong Province

NASA Astrophysics Data System (ADS)

Li, Jie; Jin, Aiwen; Hou, Guiting

2017-12-01

The Lingshan Island in Shandong Province in the eastern North China Craton, well known for the Late Mesozoic multi-scale slide-slump structures is related to paleo-earthquake. Terrigenous clastic rocks, volcanic clastic rocks and volcanic lavas are extensively exposed in the Lingshan Island and its adjacent regions of the Shandong Province, which led to fierce debates on their ages, sedimentary characteristics and tectono-sedimentary evolution. In this contribution, we present the characteristics of the Late Mesozoic stratigraphy in the Lingshan Island. Whole-rock K-Ar dating of dyke at Beilaishi and rhyolites at Laohuzui of the Lingshan Island yielded ages of 159 Ma and 106-92 Ma which coincides with the Laiyang Period rifting and the Qingshan Period rifting in the Jiaolai Basin, respectively. On the basis of the analysis to the Late Mesozoic sedimentary environment of `flysch' and `molasse'-like formations as well as tectonic stress fields reconstruction, four episodes of the tectono-sedimentary evolution were established in the Lingshan Island and its adjacent regions in the eastern North China Craton. They consist of two episodes of extensional events for the syn-rift, and two episodes of compression events for the inversion of the post-rift. The entire episodes can be summarized as follows: (1) the first syn-rift NW-SE extension in Laiyang Period can be identified by the `flysch' formation (Unit 1) and by emplacement of the NE-trending dyke in the Laiyang Group. This syn-rift episode can be related to the NW-SE post-orogenic extension resulted from the gravity collapse of the thickened lithosphere along the Sulu Orogen. (2) The first post-rift NW-SE inversion, which was caused by the NW-directed subduction of Izanaqi Plate, can be well documented by the `X' type conjugate joints as well as slide slump folds in Unit 1. (3) The second syn-rift NW-SE extension in Qingshan Period is characterized by rhyolite rocks (Unit 2). This syn-rift episode can be considered to be associated with lithospheric delamination of the thickened lithosphere in the eastern North China Craton. And finally, (4) the second post-rift NW-SE inversion which resulted from the subduction of the Pacific Plate under the eastern North China Craton in the NW direction at the end of the Qingshan Period is recorded by `molasse'-like formation (Unit 3).

Geologic assessment of undiscovered oil and gas resources—Lower Cretaceous Albian to Upper Cretaceous Cenomanian carbonate rocks of the Fredericksburg and Washita Groups, United States Gulf of Mexico Coastal Plain and State Waters

USGS Publications Warehouse

Swanson, Sharon M.; Enomoto, Catherine B.; Dennen, Kristin O.; Valentine, Brett J.; Cahan, Steven M.

2017-02-10

In 2010, the U.S. Geological Survey (USGS) assessed Lower Cretaceous Albian to Upper Cretaceous Cenomanian carbonate rocks of the Fredericksburg and Washita Groups and their equivalent units for technically recoverable, undiscovered hydrocarbon resources underlying onshore lands and State Waters of the Gulf Coast region of the United States. This assessment was based on a geologic model that incorporates the Upper Jurassic-Cretaceous-Tertiary Composite Total Petroleum System (TPS) of the Gulf of Mexico basin; the TPS was defined previously by the USGS assessment team in the assessment of undiscovered hydrocarbon resources in Tertiary strata of the Gulf Coast region in 2007. One conventional assessment unit (AU), which extends from south Texas to the Florida panhandle, was defined: the Fredericksburg-Buda Carbonate Platform-Reef Gas and Oil AU. The assessed stratigraphic interval includes the Edwards Limestone of the Fredericksburg Group and the Georgetown and Buda Limestones of the Washita Group. The following factors were evaluated to define the AU and estimate oil and gas resources: potential source rocks, hydrocarbon migration, reservoir porosity and permeability, traps and seals, structural features, paleoenvironments (back-reef lagoon, reef, and fore-reef environments), and the potential for water washing of hydrocarbons near outcrop areas.In Texas and Louisiana, the downdip boundary of the AU was defined as a line that extends 10 miles downdip of the Lower Cretaceous shelf margin to include potential reef-talus hydrocarbon reservoirs. In Mississippi, Alabama, and the panhandle area of Florida, where the Lower Cretaceous shelf margin extends offshore, the downdip boundary was defined by the offshore boundary of State Waters. Updip boundaries of the AU were drawn based on the updip extent of carbonate rocks within the assessed interval, the presence of basin-margin fault zones, and the presence of producing wells. Other factors evaluated were the middle Cenomanian sea-level fall and erosion that removed large portions of platform and platform-margin carbonate sediments in the Washita Group of central Louisiana. The production history of discovered reservoirs and well data within the AU were examined to estimate the number and size of undiscovered oil and gas reservoirs within the AU. Using the USGS National Oil and Gas Assessment resource assessment methodology, mean volumes of 40 million barrels of oil, 622 billion cubic feet of gas, and 14 million barrels of natural gas liquids are the estimated technically recoverable undiscovered resources for the Fredericksburg-Buda Carbonate Platform-Reef Gas and Oil AU.

Water supply for the Nuclear Rocket Development Station at the U.S. Atomic Energy Commission's Nevada Test Site

USGS Publications Warehouse

Young, Richard Arden

1972-01-01

The Nuclear Rocket Development Station, in Jackass Flats, occupies about 123 square miles in the southwestern part of the U.S. Atomic Energy Commission's Nevada Test Site. Jackass Flats, an intermontane valley bordered by highlands on all sides except for a drainage outlet in the southwestern corner, has an average annual rainfall of 4 inches. Jackass Flats is underlain by alluvium, colluvium, and volcanic rocks of Cenozoic age and, at greater depth, by sedimentary rocks of Paleozoic age. The alluvium and the colluvium lie above the saturated zone throughout nearly all of Jackass Flats. The Paleozoic sedimentary rocks contain limestone and dolomite units that are excellent water producers elsewhere ; however, these units are too deep in Jackass Flats to be economic sources of water. The only important water-producing unit known in the vicinity of the Nuclear Rocket Development Station is a welded-tuff aquifer, the Topopah Spring Member of the Paintbrush Tuff, which receives no significant recharge. This member contains about 500 feet of highly fractured rock underlying an area 11 miles long and 3 miles wide in western Jackass Flats. Permeability of the aquifer is derived mostly from joints and fractures; however, some permeability may be derived from gas bubbles in the upper part of the unit. Transmissivity, obtained from pumping tests, ranges from 68,000 to 488,000 gallons per day per foot. Volume of the saturated part of the aquifer is about 3.5 cubic miles, and the average specific yield probably ranges from 1 to 5 percent. The volume of ground water in storage is probably within the range of 37-187 billion gallons. This large amount of water should be sufficient to supply the needs of the Nuclear Rocket Development Station for many years. Water at the Nuclear Rocket Development Station is used for public supply, construction, test-cell coolant, exhaust cooling, and thermal shielding during nuclear reactor and engine testing, and washdown. Present (1967) average consumption of water is 520,000 gallons per day--all supplied by one well. This supply well and a standby well have a production capability of 1.6 million gallons per day--adequate for present needs. Water in the welded-tuff aquifer is of the sodium bicarbonate type. Dissolved-solids content of the water in Jackass Flats is in the general range 230 milligrams per liter in the western part to 890 milligrams per liter in the eastern part.

A theoretical derivation of the dilatancy equation for brittle rocks based on Maxwell model

NASA Astrophysics Data System (ADS)

Li, Jie; Huang, Houxu; Wang, Mingyang

2017-03-01

In this paper, the micro-cracks in the brittle rocks are assumed to be penny shaped and evenly distributed; the damage and dilatancy of the brittle rocks is attributed to the growth and expansion of numerous micro-cracks under the local tensile stress. A single crack's behaviour under the local tensile stress is generalized to all cracks based on the distributed damage mechanics. The relationship between the local tensile stress and the external loading is derived based on the Maxwell model. The damage factor corresponding to the external loading is represented using the p-alpha ( p- α) model. A dilatancy equation that can build up a link between the external loading and the rock dilatancy is established. A test of dilatancy of a brittle rock under triaxial compression is conducted; the comparison between experimental results and our theoretical results shows good consistency.

Application of Sr and O isotope relations to the petrogenesis of the alkaline rocks of the Red Hill complex, New Hampshire, USA

USGS Publications Warehouse

Foland, K.A.; Friedman, I.

1977-01-01

The Red Hill ring complex in central New Hampshire is composed of apparently cogenetic syenites, nepheline-sodalite syenite, and granite. The ages and petrogenetic relations among five of the six recognized units have been investigated by rubidiumstrontium and oxygen isotope analysis of whole rocks and separated minerals. Whole-rock samples from three syenite units are consistent with a single Rb-Sr isochron which gives an age of 198??3 m.y. and an initial (87Sr/86Sr)o ratio of 0.70330??0.00016 (??2 sigma; ??=1.42?? 10-11y-1). However, Sr isotope data for two other units, nepheline syenite and granite, are not consistent with this isochron but rather indicate higher initial ratios which range from 0.7033 to about 0.707. Whole-rock O isotope analyses give ??18O values which range from+6.2 to+9.3??? Sr and O isotope analyses on mineral separates indicate that observed whole-rock variations in (87Sr/86Sr)o are primary and are not due to any secondary process. The fact that the isotope systematics correlate with rock type, suggests that crustal interaction is likely to have played a significant role in the development of this over-and undersaturated association. Such process(es), while still not fully delineated, could be of fundamental importance to the genesis of associations of critically undersaturated and oversaturated intrusives. The data support the idea that interaction between magmas and crustal materials strongly influenced the compositional relations of similar complexes elsewhere including those of the White Mountain magma series. ?? 1977 Springer-Verlag.

Microbial community composition and endolith colonization at an Arctic thermal spring are driven by calcite precipitation

USGS Publications Warehouse

Starke, Verena; Kirshtein, Julie; Fogel, Marilyn L.; Steele, Andrew

2013-01-01

Environmental conditions shape community composition. Arctic thermal springs provide an opportunity to study how environmental gradients can impose strong selective pressures on microbial communities and provide a continuum of niche opportunities. We use microscopic and molecular methods to conduct a survey of microbial community composition at Troll Springs on Svalbard, Norway, in the high Arctic. Microorganisms there exist under a wide range of environmental conditions: in warm water as periphyton, in moist granular materials, and in cold, dry rock as endoliths. Troll Springs has two distinct ecosystems, aquatic and terrestrial, together in close proximity, with different underlying environmental factors shaping each microbial community. Periphyton are entrapped during precipitation of calcium carbonate from the spring's waters, providing microbial populations that serve as precursors for the development of endolithic communities. This process differs from most endolith colonization, in which the rock predates the communities that colonize it. Community composition is modulated as environmental conditions change within the springs. At Troll, the aquatic environments show a small number of dominant operational taxonomic units (OTUs) that are specific to each sample. The terrestrial environments show a more even distribution of OTUs common to multiple samples.

Failure Mechanisms of Brittle Rocks under Uniaxial Compression

NASA Astrophysics Data System (ADS)

Liu, Taoying; Cao, Ping

2017-09-01

The behaviour of a rock mass is determined not only by the properties of the rock matrix, but mostly by the presence and properties of discontinuities or fractures within the mass. The compression test on rock-like specimens with two prefabricated transfixion fissures, made by pulling out the embedded metal inserts in the pre-cured period was carried out on the servo control uniaxial loading tester. The influence of the geometry of pre-existing cracks on the cracking processes was analysed with reference to the experimental observation of crack initiation and propagation from pre-existing flaws. Based on the rock fracture mechanics and the stress-strain curves, the evolution failure mechanism of the fissure body was also analyzed on the basis of exploring the law of the compression-shear crack initiation, wing crack growth and rock bridge connection. Meanwhile, damage fracture mechanical models of a compression-shear rock mass are established when the rock bridge axial transfixion failure, tension-shear combined failure, or wing crack shear connection failure occurs on the specimen under axial compression. This research was of significance in studying the failure mechanism of fractured rock mass.

Magnetic signature of the 22 June 1932 tsunami deposits (Jalisco, Mexican Pacific coast)

NASA Astrophysics Data System (ADS)

Bógalo, M. F.; Ramírez-Herrera, M.-T.; Goguitchaichvili, A.; Rey, D.; Mohamed, K. J.; Calvo-Rathert, M.; Corona, N.

2017-06-01

Recent studies have demonstrated that rock-magnetic analysis may provide additional information to distinguish and characterize extreme marine inundation events such as tsunamis. Rock-magnetic proxies reinforce and improve the environmental evidences supplied by other methods, adding some decisive clues for the interpretation of the origin and genesis of the sedimentary deposits. Here we report rock-magnetic, XRD, and SEM microscopy results obtained in the Palo Verde estuary (Colima Pacific coast, Mexico) in order to enhance the tools for identification and reconstruction of two tsunami-induced deposits. The sedimentary sequence includes two sand units, a tsunami deposit (PV1) associated with the 22 June 1932 tsunami and a deeper sandy layer (PV2) related to a possible paleotsunami that occurred around 1300 C.E. Both sandy units are topped by finer grained units. Magnetic properties exhibit a significant correlation with the stratigraphy. High susceptibility (χ) and high saturation isothermal remanence (SIRM) values typical of high concentrations of (titano)magnetite are a distinctive feature of the most recent sandy tsunamigenic unit PV1 and the overlaying soil. The lower sandy tsunamigenic unit PV2 shows significantly lower χ and SIRM values, indicating lower concentration of (titano)magnetite in this unit and the overlaying clayey-silt unit. The latter also shows a higher coercivity component associated with (titano)hematite. Magnetic grain-size differences are also observed between PV1 and PV2 suggesting differences in hydraulic conditions at the time of deposition. The bulk mineralogical composition and sediment texture of these units also support the hypothesis of different provenances for each tsunamigenic unit as inferred from magnetic properties.

Evolution of Deformation Studies on Active Hawaiian Volcanoes

USGS Publications Warehouse

Decker, Robert W.; Okamura, Arnold; Miklius, Asta; Poland, Michael

2008-01-01

Everything responds to pressure, even rocks. Deformation studies involve measuring and interpreting the changes in elevations and horizontal positions of the land surface or sea floor. These studies are variously referred to as geodetic changes or ground-surface deformations and are sometimes indexed under the general heading of geodesy. Deformation studies have been particularly useful on active volcanoes and in active tectonic areas. A great amount of time and energy has been spent on measuring geodetic changes on Kilauea and Mauna Loa Volcanoes in Hawai`i. These changes include the build-up of the surface by the piling up and ponding of lava flows, the changes in the surface caused by erosion, and the uplift, subsidence, and horizontal displacements of the surface caused by internal processes acting beneath the surface. It is these latter changes that are the principal concern of this review. A complete and objective review of deformation studies on active Hawaiian volcanoes would take many volumes. Instead, we attempt to follow the evolution of the most significant observations and interpretations in a roughly chronological way. It is correct to say that this is a subjective review. We have spent years measuring and recording deformation changes on these great volcanoes and more years trying to understand what makes these changes occur. We attempt to make this a balanced as well as a subjective review; the references are also selective rather than exhaustive. Geodetic changes caused by internal geologic processes vary in magnitude from the nearly infinitesimal - one micron or less, to the very large - hundreds of meters. Their apparent causes also are varied and include changes in material properties and composition, atmospheric pressure, tidal stress, thermal stress, subsurface-fluid pressure (including magma pressure, magma intrusion, or magma removal), gravity, and tectonic stress. Deformation is measured in units of strain or displacement. For example, tilt of the ground surface on the rim of Kilauea Caldera is measured in microradians, a strain unit that gives the change in angle from some reference. The direction in which the tilt is measured must be defined - north or south, or some direction normal to the maximum changes. For displacements related to surface faulting, the changes are normally given in linear measures of offset. Changes in the diameter of a caldera can be given in either displacements or strain units. In the later case, the displacement divided by the 'original' diameter gives the strain ratio. Strains are dimensionless numbers; displacements have the dimensions of length. Vectors commonly are used to show the direction and amount of displacements in plan view. Strain results from stress. It can be elastic strain, when the strain is linearly related to stress and is recoverable; it can be viscous strain, where the rate of strain is proportional to the stress and is not recoverable; or it can be plastic strain that is often some complex stress-strain relationship, for example, elastic up to some yield strength and viscous beyond. Volcanic rocks are brittle when cold and under near-surface pressures but plastic to viscous under higher temperature and pressure regimes. It is important in deformation studies to try to define the nature of the strain and the rheology of the rocks being deformed. A good text on rheology is 'The Structure and Rheology of Complex Fluids' by R.G. Larson, 1999. Under changing tensional or compressional stresses, tiny cracks in brittle rocks may open or close, causing a quasielastic strain response. If the stresses exceed the breaking strength of the rock, brittle failure occurs, and the stress-strain relationship breaks down. This is generally the situation with near-field deformation related to earthquakes. Stresses change in complex patterns in both the near- and far-fields of the fracture, and the near-fiel

The Mohr-Coulomb criterion for intact rock strength and friction - a re-evaluation and consideration of failure under polyaxial stresses

NASA Astrophysics Data System (ADS)

Hackston, A.; Rutter, E.

2015-12-01

Abstract Darley Dale and Pennant sandstones were tested under conditions of both axisymmetric shortening and extension normal to bedding. These are the two extremes of loading under polyaxial stress conditions. Failure under generalized stress conditions can be predicted from the Mohr-Coulomb failure criterion under axisymmetric compression conditions provided the best form of polyaxial failure criterion is known. The sandstone data are best reconciled using the Mogi (1967) empirical criterion. Fault plane orientations produced vary greatly with respect to the maximum compression direction in the two loading configurations. The normals to the Mohr-Coulomb failure envelopes do not predict the orientations of the fault planes eventually produced. Frictional sliding on variously inclined sawcuts and failure surfaces produced in intact rock samples was also investigated. Friction coefficient is not affected by fault plane orientation in a given loading configuration, but friction coefficients in extension were systematically lower than in compression for both rock types and could be reconciled by a variant on the Mogi (1967) failure criterion. Friction data for these and other porous sandstones accord well with the Byerlee (1977) generalization about rock friction being largely independent of rock type. For engineering and geodynamic modelling purposes, the stress-state dependent friction coefficient should be used for sandstones, but it is not known to what extent this might apply to other rock types.

Characterization of hydrogeologic units using matrix properties, Yucca Mountain, Nevada

USGS Publications Warehouse

Flint, L.E.

1998-01-01

Determination of the suitability of Yucca Mountain, in southern Nevada, as a geologic repository for high-level radioactive waste requires the use of numerical flow and transport models. Input for these models includes parameters that describe hydrologic properties and the initial and boundary conditions for all rock materials within the unsaturated zone, as well as some of the upper rocks in the saturated zone. There are 30 hydrogeologic units in the unsaturated zone, and each unit is defined by limited ranges where a discrete volume of rock contains similar hydrogeologic properties. These hydrogeologic units can be easily located in space by using three-dimensional lithostratigraphic models based on relation- ships of the properties with the lithostratigraphy. Physical properties of bulk density, porosity, and particle density; flow properties of saturated hydraulic conductivity and moisture-retention characteristics; and the state variables (variables describing the current state of field conditions) of saturation and water potential were determined for each unit. Units were defined using (1) a data base developed from 4,892 rock samples collected from the coring of 23 shallow and 8 deep boreholes, (2) described lithostratigraphic boundaries and corresponding relations to porosity, (3) recognition of transition zones with pronounced changes in properties over short vertical distances, (4) characterization of the influence of mineral alteration on hydrologic properties such as permeability and moisture-retention characteristics, and (5) a statistical analysis to evaluate where boundaries should be adjusted to minimize the variance within layers. This study describes the correlation of hydrologic properties to porosity, a property that is well related to the lithostratigraphy and depositional and cooling history of the volcanic deposits and can, therefore, be modeled to be distributed laterally. Parameters of the hydrogeologic units developed in this study and the relation of flow properties to porosity that are described can be used to produce detailed and accurate representations of the core-scale hydrologic processes ongoing at Yucca Mountain.

Mass Dependent Fractionation of Hg Isotopes in Source Rocks, Mineral Deposits and Spring Waters of the California Coast Ranges, USA

NASA Astrophysics Data System (ADS)

Smith, C. N.; Kesler, S. E.; Blum, J. D.; Rytuba, J. J.

2007-12-01

We present here the first study of the isotopic composition of Hg in rocks, ore deposits, and active hydrothermal systems from the California Coast Ranges, one of Earth's largest Hg-depositing systems. The Franciscan Complex and Great Valley Sequence, which form the bedrock in the California Coast Ranges, are intruded and overlain by Tertiary volcanic rocks including the Clear Lake Volcanic Sequence. These rocks contain two types of Hg deposits, hot-spring deposits that form at shallow depths (<300 m) and silica-carbonate deposits that extend to greater depths (200 to 1000 m), as well as active springs and geothermal systems that release Hg to the present surface. The Franciscan Complex and Great Valley Sequence contain clastic sedimentary rocks with higher concentrations of Hg than volcanic rocks of the Clear Lake Volcanic Field. Mean Hg isotope compositions for all three rock units are similar, although the range of values in Franciscan Complex rocks is greater than in either Great Valley or Clear Lake rocks. Hot spring and silica-carbonate Hg deposits have similar average isotopic compositions that are indistinguishable from averages for the three rock units, although δ202Hg values for the Hg deposits have a greater variance than the country rocks. Precipitates from dilute spring and saline thermal waters in the area have similarly large variance and a mean δ202Hg value that is significantly lower than the ore deposits and rocks. These observations indicate there is little or no isotopic fractionation during release of Hg from its source rocks into hydrothermal solutions. Isotopic fractionation does appear to take place during transport and concentration of Hg in deposits, especially in their uppermost parts. Boiling of hydrothermal fluids is likely the most important process causing of the observed Hg isotope fractionation. This should result in the release of Hg with low δ202Hg values into the atmosphere from the top of these hydrothermal systems and a consequent enrichment in heavy Hg isotopes in the upper crust through time.

Petroleum Systems and Geologic Assessment of Undiscovered Oil and Gas, Navarro and Taylor Groups, Western Gulf Province, Texas

USGS Publications Warehouse

,

2006-01-01

The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geologically based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States. The USGS recently completed an assessment of undiscovered oil and gas potential of the Late Cretaceous Navarro and Taylor Groups in the Western Gulf Province in Texas (USGS Province 5047). The Navarro and Taylor Groups have moderate potential for undiscovered oil resources and good potential for undiscovered gas resources. This assessment is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy and petrophysical properties), and hydrocarbon traps (trap formation and timing). The USGS used this geologic framework to define one total petroleum system and five assessment units. Five assessment units were quantitatively assessed for undiscovered oil and gas resources.

Geologic studies in Alaska by the U.S. Geological Survey, 1997

USGS Publications Warehouse

Kelley, Karen D.

1999-01-01

Geologic Framework studies provide background information that is the scientific basis for present and future studies of the environment, mineral and energy resources, paleoclimate, and hazards in Alaska. One paper presents the results of sedimentologic and paleontologic comparisons of lower Paleozoic, deep-water-facies rock units in central Alaska (Dumoulin and others). The authors show which of these units are likely to correlate with one another, suggest likely source regions, and provide a structural restoration of units that have been fragmented by large fault motions. A second framework paper provides a map, rock descriptions, and chemical compositions of volcanic rocks in a newly recognized, geologically young volcanic center in the Aleutian volcanic arc (Hildreth and others). A third paper presents an interesting summary of gravity changes that occurred in south-central Alaska during the great earthquake of 1964 and for the following 25 years (Barnes). Gravity changes correlate with land-elevation changes in some cases, but not in others, which means that different processes are responsible for the gravity changes.

National Assessment of Oil and Gas Project: Geologic Assessment of Undiscovered Oil and Gas Resources of the Eastern Great Basin Province, Nevada, Utah, Idaho, and Arizona

USGS Publications Warehouse

,

2007-01-01

Introduction The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geologically based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States. The U.S. Geological Survey (USGS) recently completed an assessment of the undiscovered oil and gas potential of the Eastern Great Basin Province of eastern Nevada, western Utah, southeastern Idaho, and northwestern Arizona. This assessment is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy and petrophysical properties), and hydrocarbon traps (trap formation and timing). The USGS used this geologic framework to define one total petroleum system and three assessment units. All three assessment units were quantitatively assessed for undiscovered oil and gas resources.

Austin Chalk (!) Petroleum System: Upper Cretaceous, Southeastern Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dawson, W.C.; Katz, B.J.; Robison, V.D.

1995-10-01

The Austin Group (Coniacian-Santonian) is a sequence of interstratified chalk and marl deposited during a sea-level highstand as a transgressive unit. Austin Chalk deposition occurred on a southeastward-dipping carbonate ramp that exhibits distinctive onshore and offshore chalk lithofacies. Discrete intervals within offshore Austin lithofacies display good to excellent source rock potential. Organic carbon content ranges upward to 20.0 wt. % with generation potentials exceeding 45 mg HC/g of rock measured. Source potential increases basinward where offshore chalk units exhibit increases in both organic richness and net thickness. These organically rich units display an affinity for the Type II reference curve.more » Hydrogen index values typically exceed 300 mg HC/g TOC. Several geochemical indices suggest that the oil-window is located at relatively shallow depths (6,700 ft). Offshore chalks sourced onshore Austin reservoirs through lateral migration (along fractures and stylolites) which occurred during the middle Tertiary. Hydrocarbons may also have been sourced from the underlying Eagle Ford Shale (Turonian). Austin Shale reservoirs are characterized by low porosity/low permeability dual pore systems consisting of microporous matrix and fractures. Diagenesis (mechanical compaction, styloitization, and calcite cementation) has strongly modified Austin Chalk pore systems. Matrix porosity generally decreases with increasing depth because of progressive burial diagenesis. Austin reservoirs typically have two major sets of fractures; reservoir performance is related to fracture connectivity. Austin Chalk reservoirs are sealed by the overlying Taylor Marl (Campanian).« less

Caspase-activated ROCK-1 allows erythroblast terminal maturation independently of cytokine-induced Rho signaling

PubMed Central

Gabet, A-S; Coulon, S; Fricot, A; Vandekerckhove, J; Chang, Y; Ribeil, J-A; Lordier, L; Zermati, Y; Asnafi, V; Belaid, Z; Debili, N; Vainchenker, W; Varet, B; Hermine, O; Courtois, G

2011-01-01

Stem cell factor (SCF) and erythropoietin are strictly required for preventing apoptosis and stimulating proliferation, allowing the differentiation of erythroid precursors from colony-forming unit-E to the polychromatophilic stage. In contrast, terminal maturation to generate reticulocytes occurs independently of cytokine signaling by a mechanism not fully understood. Terminal differentiation is characterized by a sequence of morphological changes including a progressive decrease in cell size, chromatin condensation in the nucleus and disappearance of organelles, which requires transient caspase activation. These events are followed by nucleus extrusion as a consequence of plasma membrane and cytoskeleton reorganization. Here, we show that in early step, SCF stimulates the Rho/ROCK pathway until the basophilic stage. Thereafter, ROCK-1 is activated independently of Rho signaling by caspase-3-mediated cleavage, allowing terminal maturation at least in part through phosphorylation of the light chain of myosin II. Therefore, in this differentiation system, final maturation occurs independently of SCF signaling through caspase-induced ROCK-1 kinase activation. PMID:21072057

Relation of arsenic, iron, and manganese in ground water to aquifer type, bedrock lithogeochemistry, and land use in the New England coastal basins

USGS Publications Warehouse

Ayotte, Joseph D.; Nielsen, Martha G.; Robinson, Gilpin R.; Moore, Richard B.

1999-01-01

In a study of arsenic concentrations in public-supply wells in the New England Coastal Basins, concentrations at or above 0.005 mg/L (milligrams per liter) were detected in more samples of water from wells completed in bedrock (25 percent of all samples) than in water from wells completed in stratified drift (7.5 percent of all samples). Iron and manganese were detected (at concentrations of 0.05 and 0.03 mg/L, respectively) at approximately the same frequency in water from wells in both types of aquifers. Concentrations of arsenic in public-supply wells drilled in bedrock (in the National Water-Quality Assessment Program New England Coastal Basins study unit) vary with the bedrock lithology. Broad groups of lithogeochemical units generalized from bedrock lithologic units shown on state geologic maps were used in the statistical analyses. Concentrations of arsenic in water from public-supply wells in metasedimentary bedrock units that contain slightly to moderately calcareous and calcsilicate rocks (lithogeochemical group Mc) were significantly higher than the concentrations in five other groups of bedrock units in the study unit. Arsenic was detected, at or above 0.005 mg/L, in water from 44 percent of the wells in the lithogeochemical group M c and in water from less than 28 percent of wells in the five other groups. Additionally, arsenic concentrations in ground water were the lowest in the metasedimentary rocks that are characterized as variably sulfidic (group Ms ). Generally, concentrations of arsenic were low in water from bedrock wells in the felsic igneous rocks (group If ) though locally some bedrock wells in granitic rocks are known to have ground water with high arsenic concentrations, especially in New Hampshire. The concentrations of arsenic in ground water also correlate with land-use data; significantly higher concentrations are found in areas identified as agricultural land use than in undeveloped areas. There is, however, more agricultural land in areas overlying the metasedimentary rocks of lithogeochemical groups Mc and the minimally-deformed clastic sediments of group Mmd than in areas overlying other lithogeochemical groups. This correlation complicates the interpretation of sources of arsenic to ground water in bedrock. A test of this association revealed that relations between arsenic concentrations and the metasedimentary rocks of group Mc are not weakened when data associated with agricultural land use is removed; the reverse is true, however, if the data associated with the group Mc are removed from the analysis. The occurrence and variability of arsenic in water from bedrock supply wells could be related to several factors. These include (1) the distribution and chemical form of arsenic in soils and rocks that are part of the ground-water-flow system, (2) the characteristics that influence the solubility and transport of arsenic in ground water, (3) the differing degrees of vulnerability of ground-water supplies to surface contamination, and (4) the spatial associations between land use, geology, and ground-water-flow patterns. Strong relations between agricultural land use and the metasedimentary rocks of group Mc complicate the interpretation of arsenic source to water in these bedrock aquifers. This is due in part to the past use of arsenical pesticides; additionally, few whole-rock geochemical data are available for the rock types in the lithogeochemical groups of aquifers that contain ground water with elevated concentrations of arsenic. Without such data, identifying specific bedrock types as arsenic sources is not possible. In southern Maine and south-central New Hampshire, and in northern Massachusetts, the few available whole-rock analyses suggest, at least for these local areas, a connection between known bedrock chemistry and ground-water arsenic levels. Although the lithogeochemical group and land-use category variables individually describe much of the variance in the concentrations of

The crazy hollow formation (Eocene) of central Utah

USGS Publications Warehouse

Weiss, M.P.; Warner, K.N.

2001-01-01

The Late Eocene Crazy Hollow Formation is a fluviatile and lacustrine unit that was deposited locally in the southwest arm of Lake Uinta during and after the last stages of the lake the deposited the Green River Formation. Most exposures of the Crazy Hollow are located in Sanpete and Sevier Counties. The unit is characterized by a large variety of rock types, rapid facies changes within fairly short distances, and different lithofacies in the several areas where outcrops of the remnants of the formation are concentrated. Mudstone is dominant, volumetrically, but siltstone, shale, sandstone, conglomerate and several varieties of limestone are also present. The fine-grained rocks are mostly highly colored, especially in shades of yellow, orange and red. Sand grains, pebbles and small cobbles of well-rounded black chert are widespread, and "salt-and-pepper sandstone" is the conspicuous characteristic of the Crazy Hollow. The salt-and-pepper sandstone consists of grains of black chert, white chert, quartz and minor feldspar. The limestone beds and lenses are paludal and lacustrine in origin; some are fossiliferous, and contain the same fauna found in the Green River Formation. With trivial exceptions, the Crazy Hollow Formation lies on the upper, limestone member of the Green River Formation, and the beds of the two units are always accordant in attitude. The nature of the contact differs locally: at some sites there is gradation from the Green River to the Crazy Hollow; at others, rocks typical of the two units intertongue; elsewhere there is a disconformity between the two. A variety of bedrock units overlie the Crazy Hollow at different sites. In the southeasternmost districts it is overlain by the late Eocene formation of Aurora; in western Sevier County it is overlain by the Miocene-Pliocene Sevier River Formation; in northernmost Sanpete County it is overlain by the Oligocene volcanics of the Moroni Formation. At many sites bordering Sanpete and Sevier Valleys the Crazy Hollow beds dip beneath Quaternary sediments that fill the two valleys. The Crazy Hollow Formation ranges from 0 to 1,307 feet (0-398 m) thick in the region, but is usually much thinner than the maximum value. At most outcrops it is only a few scores of feet (12-50 m) thick. Its age is middle Eocene, for it is only a little younger than the underlying Green River Formation. The unit developed by the washing of detritus into the basin of the southwest arm of Lake Uinta from the various source rocks in the highlands surrounding the basin. The limestone beds and lenses formed in ponds and small lakes that developed in the basin from time to time during and following the draining and evaporation of Lake Uinta. The qualities of the Crazy Hollow Formation are described in detail for 10 different areas of outcrops in the Sanpete and Sevier Valleys and vicinity.

Preliminary report on the ground-water resources of the Klamath River basin, Oregon

USGS Publications Warehouse

Newcomb, Reuben Clair; Hart, D.H.

1958-01-01

The Klamath River basin, including the adjacent Lost River basin, includes about 5,500 square miles of plateaus, mountain-slopes and valley plains in south-central Oregon. The valley plains range in altitude from about 4,100 feet in the south to more than 4,500 feet at the northern end; the mountain and plateau lands rise to an average altitude of 6,000 feet at the drainage divide, some peaks rising above 9,000 feet. The western quarter of the basin is on the eastern slope of the Cascade Range and the remainder consists of plateaus, mountains, and valleys of the basin-and-range type. The rocks of the Klamath River basin range in age from Recent to Mesozoic. At the southwest side of the basin in Oregon, pre-Tertiary metamorphic, igneous, and sedimentary rocks, which form extensive areas farther west, are overlain by sedimentary rocks of Eocene age and volcanic rocks of Eocene and Oligocene age. These early Tertiary rocks dip east toward the central part of the Klamath River basin. The complex volcanic rocks of high Cascades include three units: the lowest unit consists of a sequence of basaltic lava flows about 800 feet thick; the medial unit is composed of volcanic-sedimentary and sedimentary rocksthe Yonna formation200 to 2,000 feet thick; the uppermost unit is a sequence of basaltic lava flows commonly about 200 feet thick. These rocks dip east from the Cascade Range and are the main bedrock formations beneath most of the basin. Extensive pumice deposits, which emanated from ancestral Mount Mazama, cover large areas in the northwestern part of the basin. The basin has an overall synclinal structure open to the south at the California boundary where it continues as the Klamath Lake basin in California. The older rocks dip into the basin in monoclinal fashion from the adjoining drainage basins. The rocks are broken along rudely rectangular nets of closely spaced normal faults, the most prominent set of which trends northwest. The network of fault displacements includes two main grabens, the Klamath and the Langell, which were downthrown approximately 50 and 1,000 feet, respectively. The average annual precipitation varies with the altitude, the higher parts of the Cascade Range getting more than 60 inches, and the semiarid valley plains receive as little as 13 inches in some places. Most precipitation occurs in the winter. The principal tributaries, Williamson and Sprague Rivers, rise near the higher parts of the eastern rim of the basin, flow through narrow valley plains to the western part, and discharge into Upper Klamath Lake. Wood River and associated creeks also empty into Upper Klamath Lake after draining southward along along the eastern foot of the Cascade Range. The Klamath River receives the outflow from Upper Klamath Lake, via Link River and Lake Ewauna, and flows southwestward through Keno Gap and hance through a youthful canyon, to its lower valley in California. The ground water occurs largely in an unconfined, or water-table, condition, though areas of local confinement are present. The regional water table is graded to a base level about equal to that of the major drainage on the valley plains. The slop of the water table, where water is confined, or the piezometric surface is downstream at about the same grade as that of the surface drainage in each of the larger valleys, and ground-water divides occur between the upper parts of adjacent major valleys. The principal water-bearing units are the lower lava rocks and upper lava rocks of the volcanic rocks of high Cascades, the pumice of Quaternary age, and the alluvium. In places layers of coarse fragmental material in the Yonna formation (Newcomb, 1958) also transmit water. The water-bearing units, especially the breccia layers of the lava rocks and the pumice, yield large amounts of water to wells and provide natural discharge outlets for the ground water. The spring outflows to the Williamson and Wood Rivers-Crooked Creek drainage, mea

Qualitative and quantitative changes in detrital reservoir rocks caused by CO2-brine-rock interactions during first injection phases (Utrillas sandstones, Northern Spain)

NASA Astrophysics Data System (ADS)

Berrezueta, E.; Ordóñez-Casado, B.; Quintana, L.

2015-08-01

The aim of this article is to describe and interpret qualitative and quantitative changes at rock matrix scale of Lower-Upper Cretaceous sandstones exposed to supercritical (SC) CO2 and brine. The effects of experimental injection of SC CO2 during the first injection phases were studied at rock matrix scale, in a potential deep sedimentary reservoir in Northern Spain (Utrillas unit, at the base of the Cenozoic Duero Basin). Experimental wet CO2 injection was performed in a reactor chamber under realistic conditions of deep saline formations (P ≈ 78 bar, T ≈ 38 °C and 24 h exposure time). After the experiment, exposed and non-exposed equivalent sample sets were compared with the aim of assessing possible changes due to the effect of the CO2-brine exposure. Optical microscopy (OpM) and scanning electron microscopy (SEM) aided by optical image analysis (OIA) were used to compare the rock samples and get qualitative and quantitative information about mineralogy, texture and porous network distribution. Chemical analyses were performed to refine the mineralogical information and to obtain whole rock geochemical data. Brine composition was also analysed before and after the experiment. The results indicate an evolution of the pore network (porosity increase ≈ 2 %). Intergranular quartz matrix detachment and partial removal from the rock sample (due to CO2 input/release dragging) are the main processes that may explain the porosity increase. Primary mineralogy (≈ 95 % quartz) and rock texture (heterogeneous sand with interconnected framework of micro-channels) are important factors that seem to enhance textural/mineralogical changes in this heterogeneous system. The whole rock and brine chemical analyses after interaction with SC CO2-brine do not present important changes in the mineralogical, porosity and chemical configuration of the rock with respect to initial conditions, ruling out relevant precipitation or dissolution at these early stages. These results, simulating the CO2 injection near the injection well during the first phases (24 h) indicate that, in this environment where CO2 displaces the brine, the mixture principally generates local mineralogical/textural re-adjustments due to physical detachment of quartz grains. Consequences deriving from these changes are variable. Possible porosity and permeability increases could facilitate further CO2 injection but textural re-adjustment could also affect the rock physically. However, it is not clear yet what effect the quartz (solid suspension) could provoke in more distant areas of the rock. Quartz could be transported in the fluid flow path and probably accumulated at pore throats.

Geohydrology of Storage Unit III and a combined flow model of the Santa Barbara and foothill ground-water basins, Santa Barbara County, California

USGS Publications Warehouse

Freckleton, John R.; Martin, Peter; Nishikawa, Tracy

1998-01-01

The city of Santa Barbara pumps most of its ground water from the Santa Barbara and Foothill ground-water basins. The Santa Barbara basin is subdivided into two storage units: Storage Unit I and Storage Unit III. The Foothill basin and Storage Unit I of the Santa Barbara basin have been studied extensively and ground-water flow models have been developed for them. In this report, the geohydrology of the Santa Barbara ground- water basin is described with a special emphasis on Storage Unit III in the southwestern part of the basin. The purposes of this study were to summarize and evaluate the geohydrology of Storage Unit III and to develop an areawide model of the Santa Barbara and Foothill basins that includes the previously unmodeled Storage Unit III. Storage Unit III is in the southwestern part of the city of Santa Barbara. It is approximately 3.5 miles long and varies in width from about 2,000 feet in the southeast to 4,000 feet in the north-west. Storage Unit III is composed of the Santa Barbara Formation and overlying alluvium. The Santa Barbara Formation (the principal aquifer) consists of Pleistocene and Pliocene(?) unconsolidated marine sand, silt, and clay, and it has a maximum saturated thickness of about 160 feet. The alluvium that overlies the Santa Barbara Formation has a maximum saturated thickness of about 140 feet. The storage unit is bounded areally by faults and low-permeability deposits and is underlain by rocks of Tertiary age. The main sources of recharge to Storage Unit III are seepage from Arroyo Burro and infiltration of precipitation. Most of the recharge occurs in the northwest part of the storage unit, and ground water flows toward the southeast along the unit's long axis. Lesser amounts of recharge may occur as subsurface flow from the Hope Ranch subbasin and as upwelling from the underlying Tertiary rocks. Discharge from Storage Unit III occurs as pumpage, flow to underground drains, underflow through alluvium in the vicinity of Arroyo Burro across the Lavigia Fault, evapotranspiration, and underflow to the Pacific Ocean. The faults that bound Storage Unit III generally are considered to be effective barriers to the flow of ground water. Interbasin ground-water flow occurs where deposits of younger alluvium along stream channels cross faults. Ground-water quality in Storage Unit III deposits varies with location and depth. Upward leakage of poor-quality water from the underlying Tertiary rocks occurs in the storage unit, and such leakage can be influenced by poor well construction or by heavy localized pumping. The highest dissolved-solids concentration (4,710 milligrams per liter) in ground water resulting from this upward leakage is found in the coastal part of the storage unit. The ground-water system was modeled as two horizontal layers. In the Foothill basin and Storage Unit I the layers are separated by a confining bed. The upper layer represents the upper producing zone and the shallow zone near the coast. The lower layer represents the lower producing zone. In general, the faults in the study area were assumed to be no-flow boundaries, except for the offshore fault that forms the southeast boundary; the southeast boundary was simulated as a general-head boundary. The Storage Unit III model was combined with the preexisting Storage Unit I and Foothill basin models, using horizontal flow barriers, to form an areawide model. The areawide model was calibrated by simulating steady-state predevelopment conditions and transient conditions for 1978-92. The nonpumping steady- state simulation was used to verify that the calibrated model yielded physically reasonable results for predevelopment conditions. The calibrated areawide model calculates water levels in Storage Unit III that are within 10 feet of measured water levels at all sites of comparison. In addition, the model adequately simulates water levels in the Storage Unit I and Foothill basin areas. A total of 33,430 acre-feet of water was pum

National Assessment of Oil and Gas Project: Petroleum systems and assessment of undiscovered oil and gas in the Denver Basin Province, Colorado, Kansas, Nebraska, South Dakota, and Wyoming - USGS Province 39

USGS Publications Warehouse

Higley, Debra K.

2007-01-01

The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geologically based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States. The USGS recently completed an assessment of undiscovered oil and gas resources of the Denver Basin Province (USGS Province 39), Colorado, Kansas, Nebraska, South Dakota, and Wyoming. Petroleum is produced in the province from sandstone, shale, and limestone reservoirs that range from Pennsylvanian to Upper Cretaceous in age. This assessment is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy and petrophysical properties), and hydrocarbon traps (trap formation and timing). The USGS used this geologic framework to define seven total petroleum systems and twelve assessment units. Nine of these assessment units were quantitatively assessed for undiscovered oil and gas resources. Gas was not assessed for two coal bed methane assessment units due to lack of information and limited potential; oil resources were not assessed for the Fractured Pierre Shale Assessment Unit due to its mature development status.

Distribution of organic carbon and petroleum source rock potential of Cretaceous and lower Tertiary carbonates, South Florida Basin: preliminary results

USGS Publications Warehouse

Palacas, James George

1978-01-01

Analyses of 134 core samples from the South Florida Basin show that the carbonates of Comanchean age are relatively richer in average organic carbon (0.41 percent) than those of Coahuilan age (0.28 percent), Gulfian age (0.18 percent) and Paleocene age (0.20 percent). They are also nearly twice as rich as the average world, wide carbonate (average 0.24 percent). The majority of carbonates have organic carbons less than 0.30 percent but the presence of many relatively organic rich beds composed of highly bituminous, argillaceous, highly stylolitic, and algal-bearing limestones and dolomites accounts for the higher percentage of organic carbon in some of the stratigraphic units. Carbonate rocks that contain greater than 0.4 percent organic carbon and that might be considered as possible petroleum sources were noted in almost each subdivision of the Coahuilan and Comanchean Series but particularly the units of Fredericksburg 'B', Trinity 'A', Trinity 'F', and Upper Sunniland. Possible source rocks have been ascribed by others to the Lower Sunniland, but lack of sufficient samples precluded any firm assessment in this initial report. In the shallower section of the basin, organic-rich carbonates containing as much as 3.2 percent organic carbon were observed in the lowermost part of the Gulfian Series and carbonate rocks with oil staining or 'dead' and 'live oil' were noted by others in the uppermost Gulfian and upper Cedar Keys Formation. It is questionable whether these shallower rocks are of sufficient thermal maturity to have generated commercial oil. The South Florida basin is still sparsely drilled and produces only from the Sunniland Limestone at an average depth of 11,500 feet (3500 m). Because the Sunniland contains good reservoir rocks and apparently adequate source rocks, and because the success rate of new oil field discoveries has increased in recent years, the chances of finding additional oil reserves in the Sunniland are promising. Furthermore, the presence of possible source rocks in many of the other stratigraphic units, in particular, the Fredericksburg, should give further impetus to exploring for other productive horizons.

A Dataset of Rock Strength Along the Mixed Bedrock-alluvial Colorado River-Quantifying a Fundamental Control in Geomorphology

NASA Astrophysics Data System (ADS)

Pederson, J. L.; Bursztyn, N.

2014-12-01

Bedrock strength is a key parameter in slope stability, landscape erosion, and fluvial incision, though it is typically ignored or at best indirectly constrained in models, as with the k erodability parameter in stream-power formulations. Indeed, empirical datasets of rock strength suited to address geomorphic questions are rare, in part because of the difficulty in measuring those rocks that are heterolithic, weak, or poorly exposed. We have completed a large dataset of measured bedrock strength organized by rock units exposed along the length of the trunk Colorado-Green river through the Colorado Plateau of the western U.S. Measurements include Selby RMS, fracturing, and field compressive tests at 168 localities, as well as 672 individual-sample tensile-strength tests in the laboratory. These rock strength results are compared to geomorphic metrics of unit stream power, river gradient, valley-bottom width, and local relief through the arid Colorado Plateau. Our measurements trend coherently and logically with bedrock type and age/induration, especially in the case of tensile strength and when the influence of fracturing is also considered, signs that the dataset is robust. Focusing on bedrock (rather than alluvial) reaches of the fluvial transect and tensile strength, there is a positive rank-correlation and a strong power-law correlation between reach-averaged rock strength and unit stream power, as well as an elegant linear relation between tensile strength and river gradient. To address the problem of immeasureable rock types, we utilize the inverse power-law scaling between tensile strength and valley-bottom width to estimate the "effective" tensile strength of heterolithic, shale-rich bedrock in alluvial reaches. These results suggest that tensile strength varies to at least an order-of-magnitude smaller values than evident with directly testable rocks in this landscape, with implications for scaling erodibility parameters. Overall, results lead to the conclusion that bedrock strength is, in fact, the first-order control on large-scale fluvial geomorphology in the Colorado Plateau. On one hand this is intuitive, yet it highlights the erroneous but common assumption that bedrock erodibility is uniform or of secondary importance in fluvial morphology and landscape evolution.

The Widespread Distribution of Komatiitic Tuffs in the 3.3 Ga Weltevreden Formation, Barberton Greenstone Belt, South Africa

NASA Astrophysics Data System (ADS)

Thompson, M. E.; Lowe, D. R.; Byerly, G. R.

2007-12-01

The 3.5-3.2 Ga Barberton greenstone belt is a heavily deformed, 10-15 km thick succession of volcanic and sedimentary rocks representing one of the best preserved Paleoarchean supracrustal sequences known. It consists of the basal volcanic-dominated Onverwacht Group and the overlying sedimentary-dominated Fig Tree and Moodies Groups. Major volcanic rocks in the BGB include komatiites, tholeiitic basalts, and dacites. Although flow rocks and fragmental deposits have been identified representing all extrusive magma types, the abundance of komatiitic volcaniclastic units is remarkable considering the mechanical difficulties in explosively erupting low viscosity ultramafic lava. In the Onverwacht Group, most komatiitic tuffs contain 85-95 wt% SiO2, due to early silicification, and very low concentrations of most other elements, making original compositions somewhat uncertain. However, in the northernmost part of the BGB, north of the Inyoka Fault, the ~ 3.3 Ga Weltevreden Formation is composed largely of komatiitic flow rocks, tuffs, layered ultramafic complexes, and subordinate black and banded cherts. Previous studies have established the extrusive nature of the komatiites, but there are also many thick interlayered slaty units, previously interpreted as sheared flow rocks, which show cross-bedding, soft-sediment deformation, and other features indicating an alternate derivation. These units range from 2 to 80 m thick and may represent 10% or more of the overall stratigraphy of the Weltevreden Formation. They are characterized by low-temperature serpentinization that has commonly preserved original elemental abundances, enabling a more precise determination of primary komatiitic liquid composition. These rocks are magnesium rich, with MgO ranging from 23 to 36 wt%, and high Ni (~1500 ppm) and Cr (~2600 ppm) contents typical of komatiites. Several possible mechanisms could have produced these rocks, including (1) erosion and transport of pre-existing komatiitic flow rock, (2) volcanic base surges, (3) current reworking of fall-deposited pyroclastic material, and (4) remobilization of hyaloclastitic debris. The abundance of fine-grained sediments and of flat- and cross-laminated beds, the paucity of cr-spinels, and komatiitic immobile element ratios suggest that most of these high-Mg beds formed by minor reworking of komatiitic pyroclastic ash in a subaqueous environment.

Experimental Investigation of the Influence of Joint Geometric Configurations on the Mechanical Properties of Intermittent Jointed Rock Models Under Cyclic Uniaxial Compression

NASA Astrophysics Data System (ADS)

Liu, Yi; Dai, Feng; Fan, Pengxian; Xu, Nuwen; Dong, Lu

2017-06-01

Intermittent joints in rock mass are quite sensitive to cyclic loading conditions. Understanding the fatigue mechanical properties of jointed rocks is beneficial for rational design and stability analysis of rock engineering projects. This study experimentally investigated the influences of joint geometry (i.e., dip angle, persistency, density and spacing) on the fatigue mechanism of synthetic jointed rock models. Our results revealed that the stress-strain curve of jointed rock under cyclic loadings is dominated by its curve under monotonic uniaxial loadings; the terminal strain in fatigue curve is equal to the post-peak strain corresponding to the maximum cyclic stress in the monotonic stress-strain curve. The four joint geometrical parameters studied significantly affect the fatigue properties of jointed rocks, including the irreversible strains, the fatigue deformation modulus, the energy evolution, the damage variable and the crack coalescence patterns. The higher the values of the geometrical parameters, the lower the elastic energy stores in this jointed rock, the higher the fatigue damage accumulates in the first few cycles, and the lower the fatigue life. The elastic energy has certain storage limitation, at which the fatigue failure occurs. Two basic micro-cracks, i.e., tensile wing crack and shear crack, are observed in cyclic loading and unloading tests, which are controlled principally by joint dip angle and persistency. In general, shear cracks only occur in the jointed rock with higher dip angle or higher persistency, and the jointed rock is characterized by lower fatigue strength, larger damage variable and lower fatigue life.

Ancient Aqueous Environments at Endeavour Crater, Mars

NASA Technical Reports Server (NTRS)

Arvidson, R. E.; Squyres, S. W.; Bell, J. F.; Catalano, J. G.; Clark, B. C.; Crumpler, L. S.; de Souza, P. A.; Fairen, A. G.; Farrand, W. H.; Fox, V. K.;

Ancient aqueous environments at Endeavour crater, Mars

USGS Publications Warehouse

Arvidson, R. E.; Squyres, S. W.; Bell, J.F.; Catalano, J.G.; Clark, B. C.; Crumpler, L.S.; de Souza, P.A.; Fairén, A.G.; Farrand, W. H.; Fox, V.K.; Gellert, Ralf; Ghosh, A.; Golombeck, M.P.; Grotzinger, J.P.; Guinness, E.A.; Herkenhoff, Kenneth E.; Jolliff, B.L.; Knoll, A.H.; Li, R.; McLennan, S.M.; Ming, D. W.; Mittlefehldt, D. W.; Moore, Johnnie N.; Morris, R.V.; Murchie, S.L.; Parker, T.J.; Paulsen, G.; Rice, J.W.; Ruff, S.W.; Smith, M.D.; Wolff, M.J.

2014-01-01

Opportunity has investigated in detail rocks on the rim of the Noachian age Endeavour crater, where orbital spectral reflectance signatures indicate the presence of Fe+3-rich smectites. The signatures are associated with fine-grained, layered rocks containing spherules of diagenetic or impact origin. The layered rocks are overlain by breccias, and both units are cut by calcium sulfate veins precipitated from fluids that circulated after the Endeavour impact. Compositional data for fractures in the layered rocks suggest formation of Al-rich smectites by aqueous leaching. Evidence is thus preserved for water-rock interactions before and after the impact, with aqueous environments of slightly acidic to circum-neutral pH that would have been more favorable for prebiotic chemistry and microorganisms than those recorded by younger sulfate-rich rocks at Meridiani Planum.

Loss of halogens from crystallized and glassy silicic volcanic rocks

USGS Publications Warehouse

Noble, D.C.; Smith, V.C.; Peck, L.C.

1967-01-01

One hundred and sixty-four F and Cl analyses of silicic welded tuffs and lavas and glass separates are presented. Comparison of the F and Cl contents of crystallized rocks with those of nonhydrated glass and hydrated glassy rocks from the same rock units shows that most of the halogens originally present were lost on crystallization. An average of about half of the F and four-fifths of the Cl originally present was lost. Analyses of hydrated natural glasses and of glassy rocks indicate that in some cases significant amounts of halogens may be removed from or added to hydrated glass through prolonged contact with ground water. The data show that the original halogen contents of the groundmass of a silicic volcanic rock can be reliably determined only from nonhydrated glass. ?? 1967.

Petrology and chemistry of Jebel Tanumah complex, Khamis Mushayt, Southern Arabian shield, Saudi Arabia

NASA Astrophysics Data System (ADS)

Nassief, M. O.; Ali, H. M.; Zakir, F. A.

The mafic intrusive complex at Jebel Tanumah is located 15 km north-west of Khamis Mushayt in the southern Arabian Shield and includes olivine-bearing gabbro as well as amphibole-diopside-hornblende gabbro cumulates. These rocks have been generally metamorphosed to upper greeenschist-lower amphibolite facies. Fourteen white rock silicate analyses indicate that the majority of the rocks are calc-alkaline to tholeiitic in composition. The two major structural units in the Khamis Mushayt region identified by Coleman consist of the basement complex of Asir Mountains and the younger metamorphic rocks. Syntectonic granitic rocks intruded the antiforms characterizing the younger rocks whereas the lower parts of the synforms are intruded by post-tectonic intrusions of layered gabbros such as the one studied at Jebel Tanumah.

Discontinuities in the shallow Martian crust at Lunae, Syria, and Sinai Plana

USGS Publications Warehouse

Davis, P.A.; Golombek, M.P.

1990-01-01

Detailed photoclinometric profiles across 125 erosional features and 141 grabens in the western equatorial region of Mars indicate the presence of three discontinuities within the shallow crust, at depths of 0.3, 0.6 km, 1 km, and 2-3 km. The shallowest discontinuity corresponds to thickness estimates for the ridged plains unit in this region, and thus the discontinuity probably is the contact between a sequence of layered rock making up this unit and the underlying megaregolith. The 1-km discontinuity is reflected in the base levels of erosion of all the features studied, and it may correspond to the base of the proposed layer of ground ice. Model calculations show that graben-bounding faults consistently intersect at the mechanical discontinuity at about 1 km depth. This discontinuity may represent an interface between ice-laden and dry regolith, ice-laden and water-laden regolith, or pristine and cemented regolith. A correlation between wall valley head depth and local thickness of the faulted layer suggests that the 1-km discontinuity also controlled the depth of the heads of sapping canyons. The third discontinuity, at a depth of 2-3 km, corresponds to the proposed base of the Martian megaregolith and is probably the interface between overlying, ejected breccia and in situ, fractured basement rocks. -from Authors

Chapter 5: Geologic Assessment of Undiscovered Petroleum Resources in the Waltman Shale Total Petroleum System,Wind River Basin Province, Wyoming

USGS Publications Warehouse

Roberts, Steve B.; Roberts, Laura N.R.; Cook, Troy

2007-01-01

The Waltman Shale Total Petroleum System encompasses about 3,400 square miles in the Wind River Basin Province, Wyoming, and includes accumulations of oil and associated gas that were generated and expelled from oil-prone, lacustrine shale source rocks in the Waltman Shale Member of the Paleocene Fort Union Formation. Much of the petroleum migrated and accumulated in marginal lacustrine (deltaic) and fluvial sandstone reservoirs in the Shotgun Member of the Fort Union, which overlies and intertongues with the Waltman Shale Member. Additional petroleum accumulations derived from Waltman source rocks are present in fluvial deposits in the Eocene Wind River Formation overlying the Shotgun Member, and also might be present within fan-delta deposits included in the Waltman Shale Member, and in fluvial sandstone reservoirs in the uppermost part of the lower member of the Fort Union Formation immediately underlying the Waltman. To date, cumulative production from 53 wells producing Waltman-sourced petroleum exceeds 2.8 million barrels of oil and 5.8 billion cubic feet of gas. Productive horizons range from about 1,770 feet to 5,800 feet in depth, and average about 3,400 to 3,500 feet in depth. Formations in the Waltman Shale Total Petroleum System (Fort Union and Wind River Formations) reflect synorogenic deposition closely related to Laramide structural development of the Wind River Basin. In much of the basin, the Fort Union Formation is divided into three members (ascending order): the lower unnamed member, the Waltman Shale Member, and the Shotgun Member. These members record the transition from deposition in dominantly fluvial, floodplain, and mire environments in the early Paleocene (lower member) to a depositional setting characterized by substantial lacustrine development (Waltman Shale Member) and contemporaneous fluvial, and marginal lacustrine (deltaic) deposition (Shotgun Member) during the middle and late Paleocene. Waltman Shale Member source rocks have total organic carbon values ranging from 0.93 to 6.21 weight percent, averaging about 2.71 weight percent. The hydrocarbon generative potential of the source rocks typically exceeds 2.5 milligrams of hydrocarbon per gram of rock and numerous samples had generative potentials exceeding 6.0 milligrams of hydrocarbon per gram of rock. Waltman source rocks are oil prone, and contain a mix of Type-II and Type-III kerogen, indicating organic input from a mix of algal and terrestrial plant matter, or a mix of algal and reworked or recycled material. Thermal maturity at the base of the Waltman Shale Member ranges from a vitrinite reflectance value of less than 0.60 percent along the south basin margin to projected values exceeding 1.10 percent in the deep basin west of Madden anticline. Burial history reconstructions for three wells in the northern part of the Wind River Basin indicate that the Waltman Shale Member was well within the oil window (Ro equal to or greater than 0.65 percent) by the time of maximum burial about 15 million years ago; maximum burial depths exceeded 10,000 feet. Onset of oil generation calculated for the base of the Waltman Shale member took place from about 49 million years ago to about 20 million years ago. Peak oil generation occurred from about 31 million years ago to 26 million years ago in the deep basin west of Madden anticline. Two assessment units were defined in the Waltman Shale Total Petroleum System: the Upper Fort Union Sandstones Conventional Oil and Gas Assessment Unit (50350301) and the Waltman Fractured Shale Continuous Oil Assessment Unit (50350361). The conventional assessment unit primarily relates to the potential for undiscovered petroleum accumulations that are derived from source rocks in the Waltman Shale Member and trapped within sandstone reservoirs in the Shotgun Member (Fort Union Formation) and in the lower part of the overlying Wind River Formation. The potential for Waltman-sourced oil accumulations in fan-delta depos

Sorptivity of rocks and soils of the van Genuchten-Mualem type

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zimmerman, R.W.; Bodvarsson, G.S.

1991-06-01

One hydrological process that will have great relevance to the performance of the proposed underground radioactive waste repository at Yucca Mountain, Nevada, is that of the absorption of water from a water-filled fracture into the adjacent unsaturated rock formation. The rate at which water is imbibed by a rock depends on the hydrological properties of the rock and on the initial saturation (or initial capillary suction) of the formation. The hydrological properties that affect imbibition are the relative permeability function and the capillary pressure function. These functions are often collectively referred to as the `characteristic functions` of the porous medium.more » For one-dimensional absorption, it can be shown that, regardless of the details of the characteristic functions, the total amount of water imbibed by the formation, per unit surface area, will be proportional to the square root of the elapsed time. Hence the ability of a rock or soil to imbibe water can be quantified by a parameter known as the sorptivity S, which is defined such that the cumulative volumetric liquid influx per unit area is given by Q = S{radical}t. The paper discusses the simplification of these characteristic functions of porous medium.« less

Review of buried crystalline rocks of eastern United States in selected hydrogeologic environments potentially suitable for isolating high-level radioactive wastes

USGS Publications Warehouse

Davis, R.W.

1984-01-01

Among the concepts suggested for the deep disposal of high-level radioactive wastes from nuclear power reactors is the excavation of a repository in suitable crystalline rocks overlain by a thick sequence of sedimentary strata in a hydrogeologic environment that would effectively impede waste transport. To determine the occurrence of such environments in the Eastern United States, a review was made of available sources of published or unpublished information, using the following hydrogeologic criteria:The top of the crystalline basement rock is 1,000 to 4,000 feet below land surface.The crystalline rock is overlain by sedimentary rock whose lowermost part, at least, contains ground water with a dissolved-solids concentration of 10,000 milligrams per liter or more.Shale or clay confining beds overlie the saline-water aquifer.The flow system in the saline-water aquifer is known or determinable from presently available data.All of these hydrogeologic conditions occur in two general areas: (1) parts of Indiana, Ohio, and Kentucky, underlain by part of the geologic structure known as the Cincinnati arch, and (2) parts of the Atlantic Coastal Plain from Georgia to New Jersey.

Petroleum Systems and Assessment of Undiscovered Oil and Gas in the Raton Basin - Sierra Grande Uplift Province, Colorado and New Mexico - USGS Province 41

USGS Publications Warehouse

Higley, Debra K.

2007-01-01

Introduction The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geologically based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States. The USGS recently completed an assessment of undiscovered oil and gas resources of the Raton Basin-Sierra Grande Uplift Province of southeastern Colorado and northeastern New Mexico (USGS Province 41). The Cretaceous Vermejo Formation and Cretaceous-Tertiary Raton Formation have production and undiscovered resources of coalbed methane. Other formations in the province exhibit potential for gas resources and limited production. This assessment is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy and petrophysical properties), and hydrocarbon traps (trap formation and timing). The USGS used this geologic framework to define two total petroleum systems and five assessment units. All five assessment units were quantitatively assessed for undiscovered gas resources. Oil resources were not assessed because of the limited potential due to levels of thermal maturity of petroleum source rocks.

Geochemical, modal, and geochronologic data for 1.4 Ga A-type granitoid intrusions of the conterminous United States

USGS Publications Warehouse

du Bray, Edward A.; Holm-Denoma, Christopher S.; San Juan, Carma A.; Lund, Karen; Premo, Wayne R.; DeWitt, Ed

2015-08-10

In addition, Kisvarsanyi (1972) suggests that iron-copper deposits in the St. Francois Mountains of southeastern Missouri are petrogenetically associated with 1.4 Ga A-type granitoids that occur in that region. Similarly, Dall’Agnol and others (2012) summarize important global associations between A-type granitoid rocks and a variety of important ore deposit types, particularly tin, high-field-strength elements (Zr, Hf, Nb, Ta), rare-earth elements, and iron oxide-copper-gold deposits. Consequently, the need to better understand relations between A-type granitoid rocks, tectonic setting, and magma petrogenesis, as well as their genetic associations with important types of ore deposits, suggests that developing a definitive geochemical, modal, and geochronologic database for these rocks in the conterminous United States is of considerable value.

Detector-unit-dependent calibration for polychromatic projections of rock core CT.

PubMed

Li, Mengfei; Zhao, Yunsong; Zhang, Peng

2017-01-01

Computed tomography (CT) plays an important role in digital rock analysis, which is a new prospective technique for oil and gas industry. But the artifacts in CT images will influence the accuracy of the digital rock model. In this study, we proposed and demonstrated a novel method to restore detector-unit-dependent functions for polychromatic projection calibration by scanning some simple shaped reference samples. As long as the attenuation coefficients of the reference samples are similar to the scanned object, the size or position is not needed to be exactly known. Both simulated and real data were used to verify the proposed method. The results showed that the new method reduced both beam hardening artifacts and ring artifacts effectively. Moreover, the method appeared to be quite robust.

Stress–strain state of adjacent rock mass under slice mining of steeply dipping ore bodies

NASA Astrophysics Data System (ADS)

Baryshnikov, VD; Gakhova, LN

2018-03-01

Under analysis is the stress state of rock mass surrounding stopes in the initial cutting layer displaced in plan relative to the above-lying extracted layer in the overcut rock mass. The authors determine the boundaries of the post-limiting deformation zones during stoping advance using the Mohr–Coulomb criterion. The sequence of stoping to ensure better support conditions is proposed.

Host rocks and their alterations as related to uranium-bearing veins in the United States

USGS Publications Warehouse

Walker, George W.

1956-01-01

This paper, dealing with the different kinds of host rocks and their alterations associated with uranium-bearing veins in the United States, is a chapter of a comprehensive report entitled , "Geology of uranium-bearing vein deposits in the United States," in preparation by George W. Walker, Frank W. Osterwald, and others. The comprehensive report will include detailed information on tectonic and structural setting, kinds of host rocks, wall-rock alteration, mineralogy, physical characteristics, processes of deposition, and concepts of origin of uraniferous veins; but, because it will not be completed until sometime in the future, some chapters of the report are being transmitted as they are finished. Part of an introductory chapter to the comprehensive report entitled, "Classification and distribution of uranium-bearing veins in the United States" (Walker and Osterwald, 1956) has already been transmitted; several of the terms used herein are defined in the introductory chapter. Data included in this chapter demonstrate that uranium-bearing veins are: 1) in rocks of nearly all textural, chemical, and mineralogic types; 2) most abundant in holocrystalline, commonly equigranular, igeneous and metamorphic rocks characterized by a moderate to high silica content and and by similar physical properties. Although some of the physiochemical properties of the host rocks are discussed in terms of favorability or nonfavoribility for uranium deposition, the principal purpose of this chapter is to establish the petroloic environment in which uranium-bearing veins have been found. Because favorability or nonfavorability of host rocks is related complexly to the chemistry of ore solutions and to methods or uranium transport and deposition, several hypothetical processes of transport and deposition have been referred to briefly; these and other hypotheses will be outlines and discussed in greater detail in a subsequent chapter. The compilation of data leading to this report and its preparation by a member of the Uranium Research and Resource Section, U.S. Geological Survey, was done on behalf of the Division of Raw Materials, U.S. Atomic Energy Commission. The report is based on both published and unpublished information collected principally by personnel of the U.S. Geological Survey, the U.S. Atomic Energy Commission or its predecessor organization, the Manhattan Engineer District, and to a lesser extent by staff members of other Federal or State agencies and by geologists in private industry. Information concerning foreign uranium-bearing vein deposits has been extracted almost exclusively from published reports; references to these and other data are included at appropriate places.

Marine and Lacustrine Organic-rich Sedimentary Unit Time Markers: Implications from Rhenium-Osmium Geochronology

NASA Astrophysics Data System (ADS)

Selby, D.

2011-12-01

Geochronology is fundamental to understand the age, rates and durations of Earth processes. This concerned Arthur Holmes who, for much of his career, attempted to define a geological time scale. This is a topic still important to Earth Scientists today, specifically the chronostratigraphy of sedimentary rocks. Here I explore the Re-Os geochronology of marine and lacustrine sedimentary rocks and its application to yield absolute time constraints for stratigraphy. The past decade has seen the pioneering research of Re-Os organic-rich sedimentary rock geochronology blossom into a tool that can now to be used to accurately and precisely determine depositional ages of organic-rich rock units that have experienced up to low grade greenschist metamorphism. This direct dating of sedimentary rocks is critical where volcanic horizons are absent. As a result, this tool has been applied to timescale calibration, basin correlation, formation duration and the timing of key Earth events (e.g., Neoproterozoic glaciations). The application of Re-Os chronometer to the Devonian-Mississippian boundary contained within the Exshaw Formation, Canada, determined an age of 361.3 ± 2.4 Ma. This age is in accord with U-Pb dates of interbedded tuff horizons and also U-Pb zircon date for the type Devonian-Mississippian Hasselbachtal section, Germany. The agreement of the biostratigraphic and U-Pb constraints of the Exshaw Formation with the Re-Os date illustrated the potential of the Re-Os chronometer to yield age determinations for sedimentary packages, especially in the absence of interbedd tuff horizons and biozones. A Re-Os date for the proposed type section of the Oxfordian-Kimmeridgian boundary, Staffin Bay, Isle of Skye, U.K., gave an age of 154.1 ± 2.2 Ma. This Re-Os age presents a 45 % (1.8 Ma) improvement in precision for the basal Kimmeridgian. It also demonstrated that the duration of the Kimmeridgian is nominally 3.3 Ma and thus is 1.6 Ma shorter than previously indicated. In addition to these examples, several studies have presented precise dates for Phanerozoic marine organic-rich units that are in excellent agreement with biostratigraphic determinations. A recent Re-Os study of the Woodford Shale (that was deposited throughout the Frasnian and Famennian) has provided important time markers as well as suggesting that the sedimentation rate of the Formation was relatively constant for ~20 Ma. To date only marine organic-rich sedimentary rocks have been utilized for Re-Os geochronology. However, lacustrine sedimentary rocks provide an invaluable archive of continental geological processes responding to tectonic, climatic and magmatic influences. Correlating these rocks to global geological phenomena requires accurate geochronological frameworks. The organic-rich lacustrine sedimentary units of the Eocene Green River Formation are enriched is Re and Os comparable to that of marine units. The Re-Os dates for the Green River Formation from the Uinta basin are 48.5 ± 0.6 Ma and 49.2 ± 1.0 Ma. These dates are in excellent agreement with Ar/Ar and U/Pb dates of interbedded tuffs in the GRF, therefore demonstrating that lacustrine units can be used for Re-Os geochronology in addition to marine organic-rich units.

Spinel and plagioclase peridotites of the Nain ophiolite (Central Iran): Evidence for the incipient stage of oceanic basin formation

NASA Astrophysics Data System (ADS)

Pirnia, Tahmineh; Saccani, Emilio; Arai, Shoji

2018-06-01

The Nain ophiolites crop out along the western border of the central East Iran Microcontinent (CEIM) and consist of an ophiolitic mélange in which pargasite-bearing spinel and plagioclase mantle lherzolites are largely represented. Whole-rock and mineral chemistry data suggest that these rocks record the complex history of the asthenospheric and lithospheric mantle evolution. The spinel lherzolites have experienced low-degree ( 5%) partial melting and contain clinopyroxenes with positive Eu anomalies (Eu/Eu* = 1.10-1.48) suggesting that the partial melting occurred under oxidized conditions (fayalite-magnetite-quartz -0.8 to +1.3). The pargasite and coexisting clinopyroxene in these rocks are depleted in light rare earth elements (LREE) (mean chondrite-normalized CeN/SmN = 0.045). The depleted chemistry of this amphibole reflects metasomatism during interaction with H2O-rich subalkaline mafic melts, most likely concurrently with or after the partial melting of the spinel lherzolites. The plagioclase lherzolites were subsequently formed by the subsolidus recrystallization of spinel lherzolites under plagioclase facies conditions as a result of mantle uprising, as evidenced by: (1) the development of plagioclase rims around the spinels; (2) plagioclase + orthopyroxene exsolution textures within some clinopyroxene grains; (3) an increase in plagioclase modal content coupled with an increase in modal olivine and a decrease in modal pyroxene and pargasite; (4) coincident decreases in Al, Mg, and Ni, and increases in Cr, Ti, and Fe in spinel, as well as decreases in Al and Ca, and increases in Cr and Ti in pyroxene and pargasite; and (5) the identical whole rock compositions of the spinel and plagioclase lherzolites, which rules out a magmatic origin for the plagioclase in these units. The Nain lherzolites have similar whole-rock and mineral geochemical compositions to subcontinental peridotites that are typically representative of Iberia-type rifted continental margins and ocean-continent transition zones (OCTZ), suggesting that they formed during the early stages of the evolution of the Nain oceanic basin. This means that the Nain lherzolites represent the Triassic-Jurassic western border of the CEIM or alternatively an associated OCTZ.

Palaeomagnetism and geochemistry of Early Palaeozoic rocks of the Barrandian (Teplé-Barrandian Unit, Bohemian Massif): palaeotectonic implications

NASA Astrophysics Data System (ADS)

Patočka, F.; Pruner, P.; Štorch, P.

The Barrandian area (the Teplá-Barrandian unit, Bohemian Massif) provided palaeomagnetic results on Early Palaeozoic rocks and chemical data on siliciclastic sediments of both Middle Cambrian and Early Ordovician to Middle Devonian sedimentary sequences; an outcoming interpretation defined source areas of clastic material and palaeotectonic settings of the siliciclastic rock deposition. The siliciclastic rocks of the earliest Palaeozoic sedimentation cycle, deposited in the Cambrian Příbram-Jince Basin of the Barrandian, were derived from an early Cadomian volcanic island arc developed on Neoproterozoic oceanic lithosphere and accreted to a Cadomian active margin of northwestern Gondwana. Inversion of relief terminated the Cambrian sedimentation, and a successory Prague Basin subsided nearby since Tremadocian. Source area of the Ordovician and Early Silurian shallow-marine siliciclastic sediments corresponded to progressively dissected crust of continental arc/active continental margin type of Cadomian age. Since Late Ordovician onwards both synsedimentary within-plate basic volcanics and older sediments had been contributing in recognizable proportions to the siliciclastic rocks. The siliciclastic sedimentation was replaced by deposition of carbonate rocks throughout late Early Silurian to Early Devonian period of withdrawal of the Cadomian clastic material source. Above the carbonates an early Givetian flysch-like siliciclastic suite completed sedimentation in the Barrandian. In times between Middle Cambrian and Early/Middle Devonian boundary interval an extensional tectonic setting prevailed in the Teplá-Barrandian unit. The extensional regime was related to Early Palaeozoic large-scale fragmentation of the Cadomian belt of northwestern Gondwana and origin of Armorican microcontinent assemblage. The Teplá-Barrandian unit was also engaged in a peri-equatorially oriented drift of Armorican microcontinent assemblage throughout the Early Palaeozoic: respective palaeolatitudes of 58°S (Middle Cambrian) and 17°S (Middle Devonian) were inferred for the Barrandian rocks. The Middle Devonian flysch-like siliciclastics of the Prague Basin suggest a reappearance of the deeply dissected Cadomian source area in a proximity of the Barrandian due to early Variscan convergences and collisions of the Armorican microcontinents. Significant palaeotectonic rotations are palaeomagnetically evidenced to take place during oblique convergence and final docking of the Teplá-Barrandian microplate within the Variscan terrane mosaic of the Bohemian Massif.

Evaluation of kinetic uncertainty in numerical models of petroleum generation

USGS Publications Warehouse

Peters, K.E.; Walters, C.C.; Mankiewicz, P.J.

2006-01-01

Oil-prone marine petroleum source rocks contain type I or type II kerogen having Rock-Eval pyrolysis hydrogen indices greater than 600 or 300-600 mg hydrocarbon/g total organic carbon (HI, mg HC/g TOC), respectively. Samples from 29 marine source rocks worldwide that contain mainly type II kerogen (HI = 230-786 mg HC/g TOC) were subjected to open-system programmed pyrolysis to determine the activation energy distributions for petroleum generation. Assuming a burial heating rate of 1??C/m.y. for each measured activation energy distribution, the calculated average temperature for 50% fractional conversion of the kerogen in the samples to petroleum is approximately 136 ?? 7??C, but the range spans about 30??C (???121-151??C). Fifty-two outcrop samples of thermally immature Jurassic Oxford Clay Formation were collected from five locations in the United Kingdom to determine the variations of kinetic response for one source rock unit. The samples contain mainly type I or type II kerogens (HI = 230-774 mg HC/g TOC). At a heating rate of 1??C/m.y., the calculated temperatures for 50% fractional conversion of the Oxford Clay kerogens to petroleum differ by as much as 23??C (127-150??C). The data indicate that kerogen type, as defined by hydrogen index, is not systematically linked to kinetic response, and that default kinetics for the thermal decomposition of type I or type II kerogen can introduce unacceptable errors into numerical simulations. Furthermore, custom kinetics based on one or a few samples may be inadequate to account for variations in organofacies within a source rock. We propose three methods to evaluate the uncertainty contributed by kerogen kinetics to numerical simulations: (1) use the average kinetic distribution for multiple samples of source rock and the standard deviation for each activation energy in that distribution; (2) use source rock kinetics determined at several locations to describe different parts of the study area; and (3) use a weighted-average method that combines kinetics for samples from different locations in the source rock unit by giving the activation energy distribution for each sample a weight proportional to its Rock-Eval pyrolysis S2 yield (hydrocarbons generated by pyrolytic degradation of organic matter). Copyright ?? 2006. The American Association of Petroleum Geologists. All rights reserved.

Jurassic-Paleogene intra-oceanic magmatic evolution of the Ankara Mélange, North-Central Anatolia, Turkey

NASA Astrophysics Data System (ADS)

Sarifakioglu, E.; Dilek, Y.; Sevin, M.

2013-11-01

Oceanic rocks in the Ankara Mélange along the Izmir-Ankara-Erzincan suture zone (IAESZ) in North-Central Anatolia include locally coherent ophiolite complexes (~179 Ma and ~80 Ma), seamount or oceanic plateau volcanic units with pelagic and reefal limestones (96.6 ± 1.8 Ma), metamorphic rocks with ages of 187.4 ± 3.7 Ma, 158.4 ± 4.2 Ma, and 83.5 ± 1.2 Ma, and subalkaline to alkaline volcanic and plutonic rocks of an island arc origin (~67-63 Ma). All but the arc rocks occur in a shaly-graywacke and/or serpentinite matrix, and are deformed by south-vergent thrust faults and folds that developed in the Middle to Late Eocene due to continental collisions in the region. Ophiolitic volcanic rocks have mid-ocean ridge (MORB) and island arc tholeiite (IAT) affinities showing moderate to significant LILE enrichment and depletion in Nb, Hf, Ti, Y and Yb, which indicate the influence of subduction-derived fluids in their melt evolution. Seamount/oceanic plateau basalts show ocean island basalt (OIB) affinities. The arc-related volcanic rocks, lamprophyric dikes and syeno-dioritic plutons exhibit high-K shoshonitic to medium-to high-K calc-alkaline compositions with strong enrichment in LILE, REE and Pb, and initial ϵNd values between +1.3 and +1.7. Subalkaline arc volcanic units occur in the northern part of the mélange, whereas the younger alkaline volcanic rocks and intrusions (lamprophyre dikes and syeno-dioritic plutons) in the southern part. The Early to Late Jurassic and Late Cretaceous epidote-actinolite, epidote-chlorite and epidote-glaucophane schists represent the metamorphic units formed in a subduction channel in the Northern Neotethys. The Middle to Upper Triassic neritic limestones spatially associated with the seamount volcanic rocks indicate that the Northern Neotethys was an open ocean with its MORB-type oceanic lithosphere by the Early Triassic. The Latest Cretaceous-Early Paleocene island arc volcanic, dike and plutonic rocks with subalkaline to alkaline geochemical affinities represent intraoceanic magmatism that developed on and across the subduction-accretion complex above a N-dipping, southward-rolling subducted lithospheric slab within the Northern Neotethys. The Ankara Mélange thus exhibits the record of ~120-130 million years of oceanic magmatism in geological history of the Northern Neotethys.

What lies beneath: geophysical mapping of a concealed Precambrian intrusive complex along the Iowa–Minnesota border

USGS Publications Warehouse

Drenth, Benjamin J.; Anderson, Raymond R.; Schulz, Klaus J.; Feinberg, Joshua M.; Chandler, Val W.; Cannon, William F.

2015-01-01

Large-amplitude gravity and magnetic highs over northeast Iowa are interpreted to reflect a buried intrusive complex composed of mafic–ultramafic rocks, the northeast Iowa intrusive complex (NEIIC), intruding Yavapai province (1.8–1.72 Ga) rocks. The age of the complex is unproven, although it has been considered to be Keweenawan (∼1.1 Ga). Because only four boreholes reach the complex, which is covered by 200–700 m of Paleozoic sedimentary rocks, geophysical methods are critical to developing a better understanding of the nature and mineral resource potential of the NEIIC. Lithologic and cross-cutting relations interpreted from high-resolution aeromagnetic and airborne gravity gradient data are presented in the form of a preliminary geologic map of the basement Precambrian rocks. Numerous magnetic anomalies are coincident with airborne gravity gradient (AGG) highs, indicating widespread strongly magnetized and dense rocks of likely mafic–ultramafic composition. A Yavapai-age metagabbro unit is interpreted to be part of a layered intrusion with subvertical dip. Another presumed Yavapai unit has low density and weak magnetization, observations consistent with felsic plutons. Northeast-trending, linear magnetic lows are interpreted to reflect reversely magnetized diabase dikes and have properties consistent with Keweenawan rocks. The interpreted dikes are cut in places by normally magnetized mafic–ultramafic rocks, suggesting that the latter represent younger Keweenawan rocks. Distinctive horseshoe-shaped magnetic and AGG highs correspond with a known gabbro, and surround rocks with weaker magnetization and lower density. Here, informally called the Decorah complex, the source body has notable geophysical similarities to Keweenawan alkaline ring complexes, such as the Coldwell and Killala Lake complexes, and Mesoproterozoic anorogenic complexes, such as the Kiglapait, Hettasch, and Voisey’s Bay intrusions in Labrador. Results presented here suggest that much of the NEIIC is composed of such complexes, and broadly speaking, may be a discontinuous group of several intrusive bodies. Most units are cut by suspected northwest-trending faults imaged as magnetic lineaments, and one produces apparent sinistral fault separation of a dike in the eastern part of the survey area. The location, trend, and apparent sinistral sense of motion are consistent with the suspected faults being part of the Belle Plaine fault zone, a complex transform fault zone within the Midcontinent rift system that is here proposed to correspond with a major structural discontinuity.

Sliding Rocks on Racetrack Playa, Death Valley National Park: First Observation of Rocks in Motion

PubMed Central

Lorenz, Ralph D.; Ray, Jib; Jackson, Brian

2014-01-01

The engraved trails of rocks on the nearly flat, dry mud surface of Racetrack Playa, Death Valley National Park, have excited speculation about the movement mechanism since the 1940s. Rock movement has been variously attributed to high winds, liquid water, ice, or ice flotation, but has not been previously observed in action. We recorded the first direct scientific observation of rock movements using GPS-instrumented rocks and photography, in conjunction with a weather station and time-lapse cameras. The largest observed rock movement involved >60 rocks on December 20, 2013 and some instrumented rocks moved up to 224 m between December 2013 and January 2014 in multiple move events. In contrast with previous hypotheses of powerful winds or thick ice floating rocks off the playa surface, the process of rock movement that we have observed occurs when the thin, 3 to 6 mm, “windowpane” ice sheet covering the playa pool begins to melt in late morning sun and breaks up under light winds of ∼4–5 m/s. Floating ice panels 10 s of meters in size push multiple rocks at low speeds of 2–5 m/min. along trajectories determined by the direction and velocity of the wind as well as that of the water flowing under the ice. PMID:25162535

Quantitative bedrock geology of east and Southeast Asia (Brunei, Cambodia, eastern and southeastern China, East Timor, Indonesia, Japan, Laos, Malaysia, Myanmar, North Korea, Papua New Guinea, Philippines, far-eastern Russia, Singapore, South Korea, Taiwan, Thailand, Vietnam)

NASA Astrophysics Data System (ADS)

Peucker-Ehrenbrink, Bernhard; Miller, Mark W.

2004-01-01

We quantitatively analyze the area-age distribution of sedimentary, igneous and metamorphic bedrock based on data from the most recent digital geologic maps of East and Southeast Asia (Coordinating Committee for Coastal and Offshore Geosciences Programmes in East and Southeast Asia (CCOP) and the Geologic Survey of Japan, 1997; 1:2,000,000), published as Digital Geoscience Map G-2 by the Geological Survey of Japan. Sedimentary rocks, volcanic rocks, plutonic rocks, ultramafic rocks and metamorphic rocks cover 73.3%, 8.5%, 8.8%, 0.9%, and 8.6% of the surface area, respectively. The average ages of major lithologic units, weighted according to bedrock area, are as follows: sedimentary rocks (average stratigraphic age of 123 Myr/median age of 26 Myr), volcanic rocks (84 Myr/20 Myr), intrusive rocks (278 Myr/195 Myr), ultramafic rocks (unknown) and metamorphic rocks (1465 Myr/1118 Myr). The variability in lithologic composition and age structure of individual countries reflects the complex tectonic makeup of this region that ranges from Precambrian cratons (e.g., northeast China and North Korea) to Mesozoic-Cenozoic active margins (e.g., Japan, the Philippines, Indonesia and New Guinea). The spatial resolution of the data varies from 44 km2 per polygon (Japan) to 1659 km2 per polygon (Taiwan) and is, on average (490 km2/polygon), similar to our previous analyses of the United States of America and Canada. The temporal and spatial resolution is sufficiently high to perform age-area analyses of individual river basins larger than ˜10,000 km2 and to quantitatively evaluate the relationship between bedrock geology and river chemistry. As many rivers draining tropical, mountainous islands of East and Southeast Asia have a disproportionate effect on the dissolved and particulate load delivered to the world oceans, bedrock geology in such river drainage basins disproportionately affect ocean chemistry.

Use of a digital model to evaluate hydrogeologic controls on groundwater flow in a fractured rock aquifer at Niagara Falls, New York, U.S.A.

USGS Publications Warehouse

Maslia, M.L.; Johnston, R.H.

1984-01-01

The Hyde Park landfill is a 15-acre (6.1 ha) chemical waste disposal site located north of Niagara Falls, New York. Underlying the site in descending order are: (1) low-permeability glacial till and lacustrine deposits; (2) a moderately permeable fractured rock aquifer - the Lockport Dolomite; and (3) a low-permeability unit - the Rochester Shale. The site is bounded on three sides by groundwater drains; the Niagara River gorge, the Niagara Power Project canal, and the Niagara Power Project buried conduits. The mechanism by which groundwater moves through fractured rocks underlying a hazardous waste site was investigated using a digital simulation approach. Three hypotheses were tested related to flow in the fractured rocks underlying Hyde Park landfill. For this purpose we used a Galerkin finite-element approximation to solve a saturated-unsaturated flow equation. A primary focus was to investigate anisotropy in the Lockport Dolomite, that is the effectiveness of horizontal (bedding) joints vs. vertical joints as water-transmitting openings. Three hydrogeologic scenarios were set up - each with prescribed limits on the hydrologic parameters. Scenario 1 specified strongly anisotropic conditions in the Lockport Dolomite (horizontal hydraulic conductivity along bedding joints exceeds vertical conductivity by 2-3 orders of magnitude), uniform areal recharge (5 in. yr.-1 or 12.7 cm yr.-1) except at the landfill where there is no recharge, and no flow through the base of the Rochester Shale. Scenario 2 also specified strongly anisotropic conditions in the Lockport; however, areal recharge was 6 in. yr.-1 (15.2 cm yr.-1) except at the landfill where the recharge was 2 in. yr.-1 (5.1 cm yr.-1), and outflow from the Rochester occurred. Scenario 3 specified isotropic conditions (that is, permeability along horizontal and vertical joints is the same in the Lockport Dolomite), recharge rates were the same as in scenario 2 and outflow through Rochester occurred. Scenario 2 provided the closest agreement between the simulated and measured heads while scenario 3 provided the poorest agreement. Among the three scenarios tested, scenario 2 (with strongly anisotropic conditions in the Lockport Dolomite with added recharge through the landfill cap and limited flow through the Rocherster Shale) is considered the most realistic hydrogeologic model. Based on simulation with the hydrogeologic parameters of scenario 2, groundwater flow near the Hyde Park site can be summarized as follows: 1. (1) Specific discharge (Darcy velocity) ranges from ???0.01 to 0.1 ft. day-1 (0.003 to 0.03 m day-1) in the upper unit of the Lockport Dolomite to slightly more than 0.0001 ft. day-1 (0.00003 m day-1) in the Rochester Shale. Real velocities are highest in the upper unit of the Lockport, ranging from ???1 to 5 ft. day-1 (0.3 to 1.5 m day-1) if the average effective porosity is assumed to be 0.02. 2. (2) A groundwater divide exists east of the landfill, indicating that all groundwater originating near or flowing beneath the landfill will flow toward and discharge in the gorge. 3. (3) Highest flow velocities (and presumably greatest potential for transporting chemical contaminants) occur in the upper unit of the Lockport and part of the lower unit of the Lockport Dolomite between the landfill and the gorge. The average time required for groundwater to move from the landfill to the discharge points at the gorge along selected flow paths in the Lockport Dolomite is estimated to be 5-6 yr. ?? 1984.

Earth observations taken by the Expedition 14 crew

NASA Image and Video Library

2006-10-30

ISS014-E-06812 (30 Oct. 2006) --- Gibraltar Bay, located near the southernmost tip of the Iberian Peninsula in the western Mediterranean Sea, is featured in this image photographed by an Expedition 14 crewmember on the International Space Station. According to scientists, the famous Rock of Gibraltar that forms the northeastern border of the Bay is formed of Jurassic seafloor sediments that were lithified to form limestone (a rock formed predominantly of the mineral calcite) and subsequently uplifted as a result of collision of the African and Eurasian tectonic plates. The cities of La Linea and Algeciras bordering the Bay -- together with petroleum-processing facilities along the northern Bay shoreline -- are part of Spain, whereas the city of Gibraltar itself (to the west of and including the Rock) is under the jurisdiction of the United Kingdom. The protected waters of the Bay and its proximity to Africa and the Strait of Gibraltar as the gateway between the Atlantic and Mediterranean contribute to the region's past and current strategic and economic importance. Numerous ships and several ship wakes are visible within the Bay; the majority of these are freighters and cargo tankers accessing the petroleum facilities. Ships nearer to the Rock are more likely cruise ships, as Gibraltar is a popular destination for tourists. Partial sunglint within the Bay highlights surface water roughened by winds funneled into the Bay by the surrounding highlands -- one such area is visible directly to the west of La Linea.

Rock formations in the Colorado Plateau of Southeastern Utah and Northern Arizona

USGS Publications Warehouse

Longwell, C.R.; Miser, H.D.; Moore, R.C.; Bryan, Kirk; Paige, Sidney

1925-01-01

The field work of which this report is a record was done in the summer and fall of 1921 by members of the United States Geological Survey. A project to build a large storage dam at Lees Ferry, on Colorado River in northern Arizona, called for a detailed topographic survey of the area covered by the project, for the purpose of determining the capacity of the reservoir. This work was undertaken by the United States Geological Survey in cooperation with the Southern California Edison Co. Three surveying parties were sent to the field, each accompanied by a geologist, whose specific duty was to study and report on the rock formations within the area to be flooded. One topographic party, under A. T. Fowler, which started at Lees Ferry and worked up stream in Arizona, was accompanied by Kirk Bryan. Another party, under K. W. Trimble, which started near Bluff and worked down the San Juan and thence down the Colorado, was accompanied by H. D. Miser. The third party, under W. R. Chenoweth, worked from Fremont River to the Waterpocket Fold and then returned to Green River, Utah, and traversed Cataract Canyon during the period of low water. C. R. Longwell was with this party until September, when his place was taken by Sidney Paige. Mr. Paige, in company with the Kolb brothers, E. C. La Rue, and Henry Ranch, left the Chenoweth party after Cataract Canyon had been surveyed and rowed down the Colorado to the mouth of the San Juan, where they were joined by Mr. Miser. Then they took a hurried trip by boat down the Colorado to Lees Ferry, making a few short stops and visiting the famous Rainbow Bridge. Thus the geology of the canyons of Colorado and San Juan rivers and of the lower parts of tributary canyons was examined continuously, and reconnaissance work was done in the country back from the rivers. At the same time a fourth party, under R. C. Moore, was mapping parts of Kane, Garfield, and Wayne counties, Utah, to determine whether oil might be found there. The present paper includes brief descriptions of the rocks of the regions traversed, detailed geologic sections, and columnar sections measured not only by the geologists who accompanied these parties but by other geologists who have worked in the same regions or in adjoining regions. The positions of the columnar sections measured and many of the other sections are shown on Figure 1.

Kinematics of syn- and post-exhumational shear zones at Lago di Cignana (Western Alps, Italy): constraints on the exhumation of Zermatt-Saas (ultra)high-pressure rocks and deformation along the Combin Fault and Dent Blanche Basal Thrust

NASA Astrophysics Data System (ADS)

Kirst, Frederik; Leiss, Bernd

2017-01-01

Kinematic analyses of shear zones at Lago di Cignana in the Italian Western Alps were used to constrain the structural evolution of units from the Piemont-Ligurian oceanic realm (Zermatt-Saas and Combin zones) and the Adriatic continental margin (Dent Blanche nappe) during Palaeogene syn- and post-exhumational deformation. Exhumation of Zermatt-Saas (U)HP rocks to approximately lower crustal levels at ca. 39 Ma occurred during normal-sense top-(S)E shearing under epidote-amphibolite-facies conditions. Juxtaposition with the overlying Combin zone along the Combin Fault at mid-crustal levels occurred during greenschist-facies normal-sense top-SE shearing at ca. 38 Ma. The scarcity of top-SE kinematic indicators in the hanging wall of the Combin Fault probably resulted from strain localization along the uppermost Zermatt-Saas zone and obliteration by subsequent deformation. A phase of dominant pure shear deformation around 35 Ma affected units in the direct footwall and hanging wall of the Combin Fault. It is interpreted to reflect NW-SE crustal elongation during updoming of the nappe stack as a result of underthrusting of European continental margin units and the onset of continental collision. This phase was partly accompanied and followed by ductile bulk top-NW shearing, especially at higher structural levels, which transitioned into semi-ductile to brittle normal-sense top-NW deformation due to Vanzone phase folding from ca. 32 Ma onwards. Our structural observations suggest that syn-exhumational deformation is partly preserved within units and shear zones exposed at Lago di Cignana but also that the Combin Fault and Dent Blanche Basal Thrust experienced significant post-exhumational deformation reworking and overprinting earlier structures.

Chief Joseph Dam, Columbia River, Washington, Additional Units and Structural Modification Foundation Report

DTIC Science & Technology

1988-01-01

diameter companion drain holes in the area below the intake structure. The second contract, DACW67-75-C-0042, was awarded to Goodfellow Brothers, Inc. in...tolerances for bolt anchors. Subhori- zontal companion drain holes were drilled adjacent to the rock bolt holes. Negligible ground water was encountered...excavation contract was then modified so that rock excavation would not go below elevation 799 feet. The contractor installed rock bolts and companion drain

Complete Bouguer gravity and aeromagnetic maps of the Rattlesnake Roadless Area, Missoula County, Montana

USGS Publications Warehouse

Kulik, Dolores M.

1986-01-01

The rocks in the study area consist mainly of the Helena Formation and the Missoula Group of the Belt Supergroup (Proterozoic Y).  Rock units of less importance are diabase sills and dikes of probable Proterozoic Z age, Middle Cambrian rocks, and glacial deposits.  Structurally, the study area consists of the Rattlesnake thrust system in the south part and a parautochthonous area broken by vertical faults in the north part.

Conditional estimates of the number of podiform chromite deposits

USGS Publications Warehouse

Singer, D.A.

1994-01-01

A desirable guide for estimating the number of undiscovered mineral deposits is the number of known deposits per unit area from another well-explored permissive terrain. An analysis of the distribution of 805 podiform chromite deposits among ultramafic rocks in 12 subareas of Oregon and 27 counties of California is used to examine and extend this guide. The average number of deposits in this sample of 39 areas is 0.225 deposits per km2 of ultramafic rock; the frequency distribution is significantly skewed to the right. Probabilistic estimates can be made by using the observation that the lognormal distribution fits the distribution of deposits per unit area. A further improvement in the estimates is available by using the relationship between the area of ultramafic rock and the number of deposits. The number (N) of exposed podiform chromite deposits can be estimated by the following relationship: log10(N)=-0.194+0.577 log10(area of ultramafic rock). The slope is significantly different from both 0.0 and 1.0. Because the slope is less than 1.0, the ratio of deposits to area of permissive rock is a biased estimator when the area of ultramafic rock is different from the median 93 km2. Unbiased estimates of the number of podiform chromite deposits can be made with the regression equation and 80 percent confidence limits presented herein. ?? 1994 Oxford University Press.

Geologic map of the Callville Bay Quadrangle, Clark County, Nevada, and Mohave County, Arizona

USGS Publications Warehouse

Anderson, R. Ernest

2003-01-01

Report: 139 Map Scale: 1:24,000 Map Type: colored geologic map A 1:24,000-scale, full-color geologic map and four cross sections of the Callville Bay 7-minute quadrangle in Clark County, Nevada and Mohave County, Arizona. An accompanying text describes 21 stratigraphic units of Paleozoic and Mesozoic sedimentary rocks and 40 units of Cenozoic sedimentary, volcanic, and intrusive rocks. It also discusses the structural setting, framework, and history of the quadrangle and presents a model for its tectonic development.

50 CFR 622.209 - Restrictions on sale/purchase.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Atlantic rock shrimp. (1) Rock shrimp harvested in the South Atlantic EEZ on board a vessel that does not have a valid commercial permit for rock shrimp, as required under § 622.200(a)(2), may not be transferred, received, sold, or purchased. (2) Rock shrimp harvested on board a vessel that has a valid...

50 CFR 622.209 - Restrictions on sale/purchase.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Atlantic rock shrimp. (1) Rock shrimp harvested in the South Atlantic EEZ on board a vessel that does not have a valid commercial permit for rock shrimp, as required under § 622.200(a)(2), may not be transferred, received, sold, or purchased. (2) Rock shrimp harvested in or from the EEZ or adjoining state...

Colorado Potential Geothermal Pathways

DOE Data Explorer

Richard E. Zehner

2012-02-01

This layer contains the weakened basement rocks. Isostatic gravity was utilized to identify structural basin areas, characterized by gravity low values reflecting weakened basement rocks. Together interpreted regional fault zones and basin outlines define geothermal "exploration fairways", where the potential exists for deep, superheated fluid flow in the absence of Pliocene or younger volcanic units.

Science Rocks! A Performance Assessment for Earth Science

ERIC Educational Resources Information Center

Waters, Melia; Straits, William

2008-01-01

This article presents an activity in which students pool their knowledge and creativity to make a song presenting what they have learned in a unit on the rock cycle. This highly motivating, integrated performance assessment incorporates multiple intelligences, reinforces learning, and is a student favorite in the elementary and middle grades.

Origin of Zn-Pb-Sb-Au mineralization adjacent to the Paleoproterozoic Boliden Au-rich VMS deposit, Sweden: evidence from petrographic and oxygen isotope characteristics

NASA Astrophysics Data System (ADS)

Adomako-Ansah, Kofi; Ishiyama, Daizo; Allen, Rodney

2018-06-01

Adjacent to the world-class Boliden deposit, fine- to coarse-grained Zn-Pb-Sb-Au-rich sulfide-sulfosalt-bearing horizons occur within the base of a metasedimentary succession that has previously been regarded to stratigraphically overlie the Skellefte Volcanics and Boliden deposit. The metasedimentary succession comprises interbedded mudstone and normal-graded crystal-rich volcanic sandstone-siltstone units, interpreted to be low-density turbidity currents in a subaqueous environment below wave base. The sharp contact between the mineralized intervals and volcanic sandstone is concordant to the bedding planes and compaction foliation. Above and below the mineralization, the wall rocks contain well-preserved plagioclase crystals, partly enclosed by a weak alteration composed of bedding-parallel metamorphic biotite±sericite minerals. These observations are consistent with burial (or tectonic) compaction and diagenetic alteration that was overprinted by metamorphic biotite. The occurrence of biotite in the wall rocks and homogenization recrystallization of the sulfide-sulfosalt assemblage in the mineralized intervals are consistent with peak metamorphic conditions ( 350-450 °C, < 4 kbars) in the Boliden area. However, preservation of plagioclase and water-rock interaction under rock-dominant conditions suggest that high δ18O values (+ 10.7 to + 13.5‰) acquired during diagenesis were unchanged by the metamorphic overprint. The δ18O values yield low temperatures (< 150 °C), which indicate pre-metamorphic conditions. These data suggest that the Zn-Pb-Sb-Au-rich intervals formed as pre-metamorphic distal syn-volcanic exhalative mineralization during sedimentation of the Vargfors group metasedimentary rocks. This implies that massive sulfide formation continued even during Vargfors group time and, therefore, there is still potential for discovery of gold-rich base-metal ores in this part of the Skellefte field stratigraphy.

U-Pb dating and isotopic signature of the alkaline ring complexes of Bou Naga (Mauritania): its bearing on late proterozoic plate tectonics around the West African craton

NASA Astrophysics Data System (ADS)

Blanc, A.; Bernard-Griffiths, J.; Caby, R.; Caruba, C.; Caruba, R.; Dars, R.; Fourcade, S.; Peucat, J. J.

1992-04-01

In the West African fold belt of Mauritania, high-grade metamorphic series, similar to those of Amsaga (Reguibat shield-West African Craton), are exposed in a window. At Bou Naga-Mauritania (19° N, 13° 15' W) in the South of this window, an alkaline ring complex has intruded the metamorphic country rocks. This complex consists of two geological formations: the Eastern formation is mainly composed of red rhyolite sills, whereas the Western formation is made up of several kinds of alkaline rocks both saturated and under-saturated which cross cut the earlier saturated units. Three U-Pb zircon age measurements have been made on the alkaline complex, and one on an orthogneiss from the metamorphic country rocks. The syenite and the alkaline granite of the Western block are 676 ± 8 and 687 ± 5 Ma old. The orthogneiss is Archaean with an age of 2709 ± 136 Ma, but the lower intercept of discordia on concordia, shows an age of 756 ± 25 Ma linked with the genesis of the alkaline complex. A major crustal contribution is recorded by Nd and O isotopes in the SiO 2-saturated rocks. These results provide evidence for the correlation of the metamorphic country rocks with the Reguibat Archaean basement and for an early Pan-African continental rifting phase in this area before the tectonometamorphic events in the Mauritanide belt. Furthermore, with regards with previous geodynamic works of the West African Craton, our results leads us to suggest a significant diachronism between late Proterozoic crustal evolution to the West and to the East of the West African Craton. This is a further evidence for modern-type plate tectonics at this time.

Constitutive Modeling of the Thermomechanical Behavior of Rock Salt

NASA Astrophysics Data System (ADS)

Hampel, A.

2016-12-01

For the safe disposal of heat-generating high-level radioactive waste in rock salt formations, highly reliable numerical simulations of the thermomechanical and hydraulic behavior of the host rock have to be performed. Today, the huge progress in computer technology has enabled experts to calculate large and detailed computer models of underground repositories. However, the big ad­van­ces in computer technology are only beneficial when the applied material models and modeling procedures also meet very high demands. They result from the fact that the evaluation of the long-term integrity of the geological barrier requires an extra­polation of a highly nonlinear deforma­tion behavior to up to 1 million years, while the underlying experimental investigations in the laboratory or in situ have a duration of only days, weeks or at most some years. Several advanced constitutive models were developed and continuously improved to describe the dependences of various deformation phenomena in rock salt on in-situ relevant boundary conditions: transient and steady-state creep, evolution of damage and dilatancy in the DRZ, failure, post-failure behavior, residual strength, damage and dilatancy reduction, and healing. In a joint project series between 2004 and 2016, fundamental features of the advanced models were investigated and compared in detail with benchmark calculations. The study included procedures for the determination of characteristic salt-type-specific model parameter values and for the performance of numerical calculations of underground structures. Based on the results of this work and on specific laboratory investigations, the rock mechanical modeling is currently developed further in a common research project of experts from Germany and the United States. In this presentation, an overview about the work and results of the project series is given and the current joint research project WEIMOS is introduced.

Petrology and Geochemistry of Tethyan Mélange and Flysch Units Adjacent to the Yarlung Zangbo Suture Zone (YZSZ), Southern Tibet

NASA Astrophysics Data System (ADS)

Dupuis, C.; Hebert, R.; Wang, C.; Li, Y.; Li, Z.

2004-05-01

Located north of the Himalayas, the E-W trending YZSZ is mainly composed of remnants of the Neo-Tethys ocean-floor and marks the suture between Indian and Eurasian plates. This project aims to define geological units immediately South of the YZSZ ophiolites : the serpentinized ophiolitic mélange, the Jurassic-Cretaceous wildflysch and the Triassic flysch. The ophiolitic mélange is characterized by ultramafic rocks, which can be divided into 3 groups. Cpx-harzburgites contain brownish aluminous spinels with Mg# of 0.7-0.75 and Cr# of 0.15-0.27. They resemble fertile abyssal peridotites with generally smooth LREE-depleted and fairly flat MREE-HREE profiles. Transitional harzburgites contain reddish spinels with Mg# of 0.57-0.66 and Cr# of 0.35-0.46. They resemble depleted abyssal or supra-subduction zone peridotites in that MREE-HREE profiles have positive slopes indicative of high degrees of partial melting. LREE profiles vary from depleted to slightly enriched, consistent with some trapped or interacting melt or aqueous fluids. Harzburgites and dunites contain dark reddish spinels with Mg# of 0.47-0.68 and Cr# of 0.40-0.63. They have U-shaped profiles characteristics of interaction between LREE-enriched melt and REE-depleted mantle residues. Spinel compositions and fractional melting modelling indicate that Cpx-harburgites may be the residues from 5-15% melting, transitional harzburgites from 15-23% melting, and harzburgites and dunites from 22-29% melting. The South Sandwich arc-basin system is considered a modern analog of initial geodynamic setting. Mafic rocks (gabbros, diabases and basalts) are ubiquitous and can be geochemically subdivided according to their source unit. LREE-depleted profiles with average (La/Yb)N of 0.5 and slight negative Nb-Ta and Ti anomalies indicate that rocks from the ophiolitic mélange formed in a back-arc basin, such as back-arc-basin mafic rocks of the Izu-Bonin Arc. REE patterns of rocks from the wildflysch are LREE-enriched with average (La/Yb)N of 5.3. These rocks are of intraplate affinity and are geochemically similar to volcanic rocks of the South Tethyan suture zone of Pakistan, which are interpreted to represent an early expression of the Réunion hotspot. Rocks from the flysch show the most LREE-enriched profiles with average (La/Yb)N of 6.9 and slight negative Nb-Ta and Ti anomalies, which suggest continental lithospheric assimilation. Similarly to volcanic rocks of the Deccan Traps, these rocks are thus interpreted to derive from an enriched mantle source of intraplate type (Réunion hotspot?), with additional contamination from the Indian continental crust (ICC). The geochemical signature of greywackes, red and black shales from the wildflysch and flysch units are all concordant with a continental passive margin setting. Despite fairly important chemical weathering, the signature was not affected by significant sedimentary recycling nor heavy-mineral accumulation. REE patterns show a LREE enrichment typical of shales and indicate an old upper CC provenance for the turbidites. Multi-element patterns indicate both mafic and felsic contributions to the source. The mafic contribution (slight positive Ti anomalies) could originate from mafic blocks of enriched intraplate geochemical affinity found in the sedimentary units, whereas the felsic contribution (slight LREE enrichment and negative NB-Ta anomalies) probably derives from remnants of evolved migmatitic batholith of the ICC.

Stress Wave Propagation in Viscoelastic-Plastic Rock-Like Materials.

PubMed

Lang, Liu; Song, Ki-Il; Zhai, Yue; Lao, Dezheng; Lee, Hang-Lo

2016-05-17

Rock-like materials are composites that can be regarded as a mixture composed of elastic, plastic, and viscous components. They exhibit viscoelastic-plastic behavior under a high-strain-rate loading according to element model theory. This paper presents an analytical solution for stress wave propagation in viscoelastic-plastic rock-like materials under a high-strain-rate loading and verifies the solution through an experimental test. A constitutive equation of viscoelastic-plastic rock-like materials was first established, and then kinematic and kinetic equations were then solved to derive the analytic solution for stress wave propagation in viscoelastic-plastic rock-like materials. An experimental test using the SHPB (Split Hopkinson Pressure Bar) for a concrete specimen was conducted to obtain a stress-strain curve under a high-strain-rate loading. Inverse analysis based on differential evolution was conducted to estimate undetermined variables for constitutive equations. Finally, the relationship between the attenuation factor and the strain rate in viscoelastic-plastic rock-like materials was investigated. According to the results, the frequency of the stress wave, viscosity coefficient, modulus of elasticity, and density play dominant roles in the attenuation of the stress wave. The attenuation decreases with increasing strain rate, demonstrating strongly strain-dependent attenuation in viscoelastic-plastic rock-like materials.

Biodiversity of shallow subtidal, under-rock invertebrates in Europe's first marine reserve: Effects of physical factors and scientific sampling

NASA Astrophysics Data System (ADS)

Trowbridge, Cynthia D.; Kachmarik, Katy; Plowman, Caitlin Q.; Little, Colin; Stirling, Penny; McAllen, Rob

2017-03-01

At Lough Hyne Marine Reserve in SW Ireland, shallow subtidal, under-rock biodiversity was investigated to assess (i) any deleterious effects of scientific sampling and (ii) quantitative baseline community patterns. Comparisons were made between 10 sites with annual rock-turning disturbance and 10 with multi-decadal (historical) disturbance. At each site, shallow subtidal rocks (N = 1289 total) were lifted, organisms recorded, and rocks replaced in their original position. Biodiversity indices were calculated to evaluate how diversity varied with location within the lough, frequency of sampling disturbance, degree of hypoxia/anoxia, dissolved oxygen (DO) concentration, and number of rocks turned. The richness of solitary invertebrates surveyed in situ averaged 21 taxa per site with significantly more in the South Basin (near the lough's connection to the ocean) than in the North Basin. The Shannon-Wiener Index did not differ significantly with variables investigated. However, evenness was higher at annually disturbed sites than at historical ones where anemones with algal symbionts often dominated. Several sites were hypoxic to anoxic under the shallow subtidal rocks. Cup corals were most abundant in the South Basin; DO was a crucial explanatory variable of these sensitive species. Solitary ascidians were most abundant at South-Basin annual sites with DO levels being a highly significant explanatory variable.

Stress Wave Propagation in Viscoelastic-Plastic Rock-Like Materials

PubMed Central

Lang, Liu; Song, KI-IL; Zhai, Yue; Lao, Dezheng; Lee, Hang-Lo

2016-01-01

Rock-like materials are composites that can be regarded as a mixture composed of elastic, plastic, and viscous components. They exhibit viscoelastic-plastic behavior under a high-strain-rate loading according to element model theory. This paper presents an analytical solution for stress wave propagation in viscoelastic-plastic rock-like materials under a high-strain-rate loading and verifies the solution through an experimental test. A constitutive equation of viscoelastic-plastic rock-like materials was first established, and then kinematic and kinetic equations were then solved to derive the analytic solution for stress wave propagation in viscoelastic-plastic rock-like materials. An experimental test using the SHPB (Split Hopkinson Pressure Bar) for a concrete specimen was conducted to obtain a stress-strain curve under a high-strain-rate loading. Inverse analysis based on differential evolution was conducted to estimate undetermined variables for constitutive equations. Finally, the relationship between the attenuation factor and the strain rate in viscoelastic-plastic rock-like materials was investigated. According to the results, the frequency of the stress wave, viscosity coefficient, modulus of elasticity, and density play dominant roles in the attenuation of the stress wave. The attenuation decreases with increasing strain rate, demonstrating strongly strain-dependent attenuation in viscoelastic-plastic rock-like materials. PMID:28773500

Assessment of undiscovered oil and gas resources of the Devonian Marcellus Shale of the Appalachian Basin Province

USGS Publications Warehouse

Coleman, James L.; Milici, Robert C.; Cook, Troy A.; Charpentier, Ronald R.; Kirshbaum, Mark; Klett, Timothy R.; Pollastro, Richard M.; Schenk, Christopher J.

2011-01-01

Using a geology-based assessment methodology, the U.S. Geological Survey (USGS) estimated a mean undiscovered natural gas resource of 84,198 billion cubic feet and a mean undiscovered natural gas liquids resource of 3,379 million barrels in the Devonian Marcellus Shale within the Appalachian Basin Province. All this resource occurs in continuous accumulations. In 2011, the USGS completed an assessment of the undiscovered oil and gas potential of the Devonian Marcellus Shale within the Appalachian Basin Province of the eastern United States. The Appalachian Basin Province includes parts of Alabama, Georgia, Kentucky, Maryland, New York, Ohio, Pennsylvania, Tennessee, Virginia, and West Virginia. The assessment of the Marcellus Shale is based on the geologic elements of this formation's total petroleum system (TPS) as recognized in the characteristics of the TPS as a petroleum source rock (source rock richness, thermal maturation, petroleum generation, and migration) as well as a reservoir rock (stratigraphic position and content and petrophysical properties). Together, these components confirm the Marcellus Shale as a continuous petroleum accumulation. Using the geologic framework, the USGS defined one TPS and three assessment units (AUs) within this TPS and quantitatively estimated the undiscovered oil and gas resources within the three AUs. For the purposes of this assessment, the Marcellus Shale is considered to be that Middle Devonian interval that consists primarily of shale and lesser amounts of bentonite, limestone, and siltstone occurring between the underlying Middle Devonian Onondaga Limestone (or its stratigraphic equivalents, the Needmore Shale and Huntersville Chert) and the overlying Middle Devonian Mahantango Formation (or its stratigraphic equivalents, the upper Millboro Shale and middle Hamilton Group).

Crack propagation of brittle rock under high geostress

NASA Astrophysics Data System (ADS)

Liu, Ning; Chu, Weijiang; Chen, Pingzhi

2018-03-01

Based on fracture mechanics and numerical methods, the characteristics and failure criterions of wall rock cracks including initiation, propagation, and coalescence are analyzed systematically under different conditions. In order to consider the interaction among cracks, adopt the sliding model of multi-cracks to simulate the splitting failure of rock in axial compress. The reinforcement of bolts and shotcrete supporting to rock mass can control the cracks propagation well. Adopt both theory analysis and simulation method to study the mechanism of controlling the propagation. The best fixed angle of bolts is calculated. Then use ansys to simulate the crack arrest function of bolt to crack. Analyze the influence of different factors on stress intensity factor. The method offer more scientific and rational criterion to evaluate the splitting failure of underground engineering under high geostress.

Is the Mantle-Crust Transition in the Finero Complex (southern Alps) a Fossil Continental Moho?

NASA Astrophysics Data System (ADS)

Zanetti, A.; Langone, A.; Tommasi, A.; Vauchez, A.; Padron-Navarta, J. A.; Giovanardi, T.; Mazzucchelli, M.

2017-12-01

The geophysical studies indicate that the mantle-continental crust discontinuity is usually the site of complex intercalations of rocks having different physical and chemical properties. The possibility to directly characterize such rocks is extremely limited, because very few fossil continental Moho discontinuities crop out: in addition, most of them are considered to be representative of island arc environments. To address this issue, a comprehensive investigation has been carried out in the Finero Complex (Ivrea-Verbano Zone; Southern Alps), where the Phlogopite Peridotite (PP) mantle unit is surrounded by mafic-ultramafic rocks interpreted as intrusive crustal bodies. The crustal unit placed in contact with the PP is the Layered Internal Zone (LIZ), which is overlaid by the Amphibole Peridotite unit. At the contact with LIZ, the typical phlogopite-amphibole-harzburgite forming the PP unit is replaced by a weakly-deformed amphibole-biotite-bearing orthopyroxenite layer. Orthopyroxenite amphibole shows the typical LILE and LREE enrichments and the HFSE and HREE depletion observed in the rest of the mantle unit. This suggests that orthopyroxenite was segregated during the pervasive metasomatic event characterising the PP unit. The LIZ is formed by hornblendites, amphibole-garnet gabbros, pyroxenites and garnet hornblendites. The Amphibole Peridotite unit consists of peridotites, hornblendites and pyroxenites. In the LIZ, the melt intrusion locally involved the assimilation of early gabbroic cumulates, and the segregation of garnet hornblendites by substitution of pyroxenites. In the Amphibole Peridotite, late porous-flow melt migration produced secondary recrystallisation fronts, associated to the development of trace element gradients due to ion-exchange processes. Our observations suggest that the transition between PP and LIZ is primary. The LIZ and Amphibole Peridotite units record multiple events of migration of melt, whose composition varied from LREE-depleted to extremely LREE-enriched. The large variety of rocks, geochemical signatures and petrologic processes recorded by the studied mantle-crust transition evidences as it worked for a very long time as a primary lithospheric discontinuity, representing a preferential level of channelling for the uprising melts.

The exhumation of the (U)HP rocks of the Central and Western Penninic Alps: comparison study between thermo-mechanical models and field data

NASA Astrophysics Data System (ADS)

Schenker, Filippo Luca; Schmalholz, Stefan M.; Baumgartner, Lukas P.; Pleuger, Jan

2015-04-01

The Central and Western Penninic (CWP) Alps form an orogenic wedge of imbricate tectonic nappes. Orogenic wedges form typically at depths < 60 km. Nevertheless, a few nappes and massifs (i.e. Adula/Cima Lunga, Dora-Maira, Monte Rosa, Gran Paradiso, Zermatt-Saas) exhibit High- and Ultra-High-Pressure (U)HP metamorphic rocks suggesting that they were buried by subduction to depths >60 km and subsequently exhumed into the accretionary wedge. Mechanically, the exhumation of the (U)HP rocks from mantle depths can be explained by two contrasting buoyancy-driven models: (1) overall return flow of rocks in a subduction channel and (2) upward flow of individual, lighter rock units within a heavier material (Stokes flow). In this study we compare published numerical exhumation models of (1) and (2) with structural and metamorphic data of the CWP Alps. Model (1) predicts the exhumation of large volumes of (U)HP rocks within a viscous channel (1100-500 km2 in a 2D cross-section through the subduction zone). The moderate volume (e.g. ~7 km2 in a geological cross-section of the UHP unit of the Dora-Maira) and the coherent architecture of the (U)HP nappes suggests that the exhumation through (1) is unlikely for (U)HP nappes of the CWP Alps. Model (2) predicts the exhumation of appropriate volumes of (U)HP rocks, but generally the (U)HP rocks exhume vertically in the overriding plate and are not incorporated into the orogenic wedge. Nevertheless, the exhumation through (2) is feasible either with a vertical or with an extremely viscous and dense subduction channel. Whether these characteristics are applicable to the CWP UHP nappes will be discussed in light of field observations.

29 CFR 1926.913 - Blasting in excavation work under compressed air.

Code of Federal Regulations, 2014 CFR

2014-07-01

... rock face is approaching mixed face, and when tunnel excavation is in mixed face, blasting shall be... tunnel excavation in rock face approaches mixed face, to determine the general nature and extent of rock...

29 CFR 1926.913 - Blasting in excavation work under compressed air.

Code of Federal Regulations, 2012 CFR

2012-07-01

... rock face is approaching mixed face, and when tunnel excavation is in mixed face, blasting shall be... tunnel excavation in rock face approaches mixed face, to determine the general nature and extent of rock...

0-6686 : improving DMS 9210 requirements for limestone rock asphalt : [project summary].

DOT National Transportation Integrated Search

2013-08-01

Limestone rock asphalt (LRA) mixtures have : been produced and placed for several decades : using specification requirements currently listed : under DMS 9210, Limestone Rock Asphalt (LRA). : Several Texas Department of Transportation : (TxDOT) distr...

Multi-stage accretion of high pressure rocks and thermal changes in a subduction channel: evidence from Diego de Almagro Island (Chilean Patagonia)

NASA Astrophysics Data System (ADS)

Hyppolito, Thais; Angiboust, Samuel; Juliani, Caetano; Glodny, Johannes; Garcia-Casco, Antonio; Calderon, Mauricio; Chopin, Christian

2016-04-01

The remote Diego de Almagro Island, Chile (51° 30' S) exposes one of the rare vestiges of the Cretaceous paleo-subduction system of western South America. It is constituted by two main tectonic units formed by mafic rocks and metasediments: the high temperature/middle pressure Lázaro unit to the East and the high pressure-low temperature Almagro Complex to the West. We herein focus on the Almagro Complex, a pluri-kilometer thick subducted sequence comprising dominantly metatuffs, but also Grt-micaschists, meta-pillow lavas (showing MORB and OIB signatures) and metacherts (transformed to quartz+garnet-rich layers). Despite its apparent homogeneity, the Almagro Complex is actually composed of two distinct units (Willner et al., 2004) with distinct pressure-temperature-time paths. The Garnet Amphibolite unit (GA) shows three chemically and microstructurally distinct garnet generations that grew and (re)-equilibrated between 1.1 GPa and 1.7 GPa (35-55 km) and between 500°C and 600°C. We report for the first time in Chilean Patagonia the presence of rare relicts of omphacite in equilibrium with garnet in mafic layers together with the finding of chloritoid inclusions in garnet from metasediments, and omphacite and glaucophane inclusions in metatuffs. Our P-T estimates, based on pseudosection modeling, single/multi-equilibrium estimates and Raman spectroscopy of organic matter, demonstrate that rocks from the GA unit reached eclogite facies at around 1.7 to 1.8 GPa. Rb-Sr mineral data for Grt-amphibolites indicates that the amphibolitization overprint - which varies in intensity throughout the GA unit - took place at c. 120 Ma. The Blueschist unit, structurally below the GA unit, comprises lithologies similar to the GA unit but finer grained than the former. On other hand, the Blueschist unit (i) does not show garnet with multiple overgrowths and omphacite crystals as seen in the in GA unit; (ii) exhibits slightly lower peak metamorphic conditions than the GA unit (c. 500 °C, 1.4 GPa); (iii) has not suffered the strong amphibolitization visible in the GA unit, and (iv) records blueschist facies deformation at ~80 Ma (Rb-Sr mineral data). Importantly, this cool 80 Ma old event heterogeneously overprinted the GA rocks as shown by silica-rich (Si = 3.5 pfu) rims around phengite (Si = 3.33 pfu) crystals and glaucophane overgrowths around amphibolite-facies hornblende. The amphibolitization stage recorded by GA unit reveals the presence of a transient warming up of the subduction thermal gradient from 9 °C/ km to c. 14 °C/km at c. 120 Ma. We propose that the GA unit has been subsequently cooled down at around 80 Ma coevally with peak metamorphism in the blueschist unit. Dissolution-overgrowth patterns visible in GA unit garnets may be viewed as the record of short-lived thermal pulses associated with discrete basal accretion events. Lately, GA and blueschist units have been tectonically juxtaposed near the root of the accretionary wedge (at c. 30 km depth) and exhumed coherently. Our P-T-t reconstructions for Diego de Almagro rocks bear implications for reconstructing the physical nature of the subduction interface as well as for the understanding of transient, deep accretionary processes taking place near the roots of the seismogenic zone.

Hydrogeologic controls imposed by mechanical stratigraphy in layered rocks of the Châteauguay River Basin, a U.S.-Canada transborder aquifer

NASA Astrophysics Data System (ADS)

Morin, Roger; Godin, RéJean; Nastev, Miroslav; Rouleau, Alain

2007-04-01

The Châteauguay River Basin delineates a transborder watershed with roughly half of its surface area located in northern New York State and half in southern Québec Province, Canada. As part of a multidisciplinary study designed to characterize the hydrogeologic properties of this basin, geophysical logs were obtained in 12 wells strategically located to penetrate the four major sedimentary rock formations that constitute the regional aquifers. The layered rocks were classified according to their elastic properties into three primary units: soft sandstone, hard sandstone, and dolostone. Downhole measurements were analyzed to identify fracture patterns associated with each unit and to evaluate their role in controlling groundwater flow. Fracture networks are composed of orthogonal sets of laterally extensive, subhorizontal bedding plane partings and bed-delimited, subvertical joints with spacings that are consistent with rock mechanics principles and stress models. The vertical distribution of transmissive zones is confined to a few select bedding plane fractures, with soft sandstone having the fewest (one per 70-m depth) and hard sandstone the most (five per 70-m depth). Bed-normal permeability is examined using a probabilistic model that considers the lengths of flow paths winding along joints and bedding plane fractures. Soft sandstone has the smallest bed-normal permeability primarily because of its wide, geomechanically undersaturated joint spacing. Results indicate that the three formations have similar values of bulk transmissivity, within roughly an order of magnitude, but that each rock unit has its own unique system of groundwater flow paths that constitute that transmissivity.

Analysis of deep seismic reflection and other data from the southern Washington Cascades

NASA Astrophysics Data System (ADS)

Stanley, W. D.; Johnson, S. Y.

Limited possibilities exist for new hydrocarbon exploration regimes in the Pacific Northwest. Extensive geophysical studies have been used to outline a proposed sedimentary basin hidden beneath volcanic rocks of the Cascades region of southwestern Washington (Stanley et. al, 1992, AAPG Bull. 76, 1569-1585). Electrical geophysical imaging using the magnetotelluric (MT) method first detected thick, electrically conductive sequences believed to represent late Cretaceous to Oligocene marine sedimentary rocks. The conductive section occurs at depths from about 1 km to 10 km in the area west of a line between Mt. Rainier and Mt. Adams, extending westward to a line between Mt. St. Helens and just west of Morton, WA. The conductive rocks reaches thicknesses as great as 10 km. The anomalous rocks appear to be very near the surface in the axis of anticanes that bring Eocene marine shales to shallow depths. Careful consideration of physical properties and the correspondence of the morphology of the units to known fold sets suggests that the high conductivities are related to lithologic/stratigraphic units rather than to variations in physical properties. Our preference for the lithology of the anomalous section, based upon a study of regional geology and structure, is one dominated by marine shales of Eocene and older age. Other possible lithologies that have been evaluated for the conductive section include nonmarine sedimentary units of Tertiary age, highly altered volcanic flows, and pre-Tertiary metasedimentary rocks with large percentages of graphite. We refer to this anomalously conductive region as the southern Washington Cascades conductor (SWCC).

Hydrogeologic controls imposed by mechanical stratigraphy in layered rocks of the Chateauguay River Basin, a U.S.-Canada transborder aquifer

USGS Publications Warehouse

Morin, Roger H.; Godin, Rejean; Nastev, Miroslav; Rouleau, Alain

2007-01-01

[1] The Châteauguay River Basin delineates a transborder watershed with roughly half of its surface area located in northern New York State and half in southern Québec Province, Canada. As part of a multidisciplinary study designed to characterize the hydrogeologic properties of this basin, geophysical logs were obtained in 12 wells strategically located to penetrate the four major sedimentary rock formations that constitute the regional aquifers. The layered rocks were classified according to their elastic properties into three primary units: soft sandstone, hard sandstone, and dolostone. Downhole measurements were analyzed to identify fracture patterns associated with each unit and to evaluate their role in controlling groundwater flow. Fracture networks are composed of orthogonal sets of laterally extensive, subhorizontal bedding plane partings and bed-delimited, subvertical joints with spacings that are consistent with rock mechanics principles and stress models. The vertical distribution of transmissive zones is confined to a few select bedding plane fractures, with soft sandstone having the fewest (one per 70-m depth) and hard sandstone the most (five per 70-m depth). Bed-normal permeability is examined using a probabilistic model that considers the lengths of flow paths winding along joints and bedding plane fractures. Soft sandstone has the smallest bed-normal permeability primarily because of its wide, geomechanically undersaturated joint spacing. Results indicate that the three formations have similar values of bulk transmissivity, within roughly an order of magnitude, but that each rock unit has its own unique system of groundwater flow paths that constitute that transmissivity.

Wind effects on Martian soil

NASA Technical Reports Server (NTRS)

1997-01-01

This false-color combination image highlights details of wind effects on the Martian soil at the Pathfinder landing site. Red and blue filter images have been combined to enhance brightness contrasts among several soil units. Martian winds have distributed these lighter and darker fine materials in complex patterns around the rocks in the scene (blue). For scale, the rock at right center is 16 centimeters (6.3 inches) long. This scene is one of several that will be monitored weekly for changes caused by wind activity.

Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages and Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

Fracturing And Liquid CONvection

DOE Office of Scientific and Technical Information (OSTI.GOV)

2012-02-29

FALCON has been developed to enable simulation of the tightly coupled fluid-rock behavior in hydrothermal and engineered geothermal system (EGS) reservoirs, targeting the dynamics of fracture stimulation, fluid flow, rock deformation, and heat transport in a single integrated code, with the ultimate goal of providing a tool that can be used to test the viability of EGS in the United States and worldwide. Reliable reservoir performance predictions of EGS systems require accurate and robust modeling for the coupled thermal-hydrological-mechanical processes. Conventionally, these types of problems are solved using operator-splitting methods, usually by coupling a subsurface flow and heat transport simulatormore » with a solid mechanics simulator via input files. FALCON eliminates the need for using operator-splitting methods to simulate these systems, and the scalability of the underlying MOOSE architecture allows for simulating these tightly coupled processes at the reservoir scale, allowing for examination of the system as a whole (something the operator-splitting methodologies generally cannot do).« less

Paleogeographic setting of Pennsylvanian Tyler formation and relation to underlying Mississippian rocks in Montana and North Dakota

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maughan, E.K.

Pennsylvanian sedimentary rocks in the northern Rocky Mountains and in the northern Great Plains of the United States were deposited primarily on a broad marine shelf between the North American craton and the late Paleozoic continental margin in Idaho and adjacent states. The Lower Pennsylvanian (Morrowan) Tyler Formation comprises detrital sediments and some limestone beds in Montana and North Dakota that were deposited along an eastward-transgressing marine shoreline after regional uplift, warping, and faulting had resulted in an erosional unconformity on top of Mississippian strata. The Lower Pennsylvanian shoreline finally extended onto the cratonic interior in eastern North Dakota. Initialmore » Tyler sediments were deposited as a deltaic and fluviolacustrine complex succeeded by littoral deposits as the Early Pennsylvanian shoreline transgressed eastward across the shelf. The Tyler Formation is subdivided into the Stonehouse Canyon Member at the base, the Bear Gulch Member, and the Cameron Creek Member at the top.« less

Edwin James' and John Hinton's revisions of Maclure's geologic map of the United States

NASA Astrophysics Data System (ADS)

Aalto, K. R.

2012-03-01

William Maclure's pioneering geologic map of the eastern United States, published first in 1809 with Observations on the Geology of the United States, provided a foundation for many later maps - a template from which geologists could extend their mapping westward from the Appalachians. Edwin James, botanist, geologist and surgeon for the 1819/1820 United States Army western exploring expedition under Major Stephen H. Long, published a full account of this expedition with map and geologic sections in 1822-1823. In this he extended Maclure's geology across the Mississippi Valley to the Colorado Rockies. John Howard Hinton (1791-1873) published his widely read text: The History and Topography of the United States in 1832, which included a compilations of Maclure's and James' work in a colored geologic map and vertical sections. All three men were to some degree confounded in their attempts to employ Wernerian rock classification in their mapping and interpretations of geologic history, a common problem in the early 19th Century prior to the demise of Neptunist theory and advent of biostratigraphic techniques of correlation. However, they provided a foundation for the later, more refined mapping and geologic interpretation of the eastern United States.

Metamorphic style and development of the blueschist- to eclogite-facies rocks, Cyclades, Greece

NASA Astrophysics Data System (ADS)

Schumacher, J. C.; Brady, J. B.; Cheney, J. T.

2008-07-01

The island of Syros, Greece is part of the Attic-Cycladic blueschist belt, formed during Mesozoic Eurasia-Africa subduction. The rocks of Syros can be broadly divided into three tectono-stratigraphic units: (I) metamorphosed sedimentary and volcanic rocks (marble-schist sequence), (II) remnants of oceanic crust with fault-bounded packages of blueschist/eclogite-facies mafic rocks and serpentinite (mafic-ultramafic rocks) and (III) the Vari gneiss, which is a tectonic klippe. Low-temperature, high-pressure assemblages are found on several islands in the Cyclades. The best preserved of these rocks are on Syros and Sifnos islands. Mineral compositions and peak metamorphic assemblages are similar on both islands. Both islands are considered to share similar P-T histories with highest-pressure mineral assemblages reflecting conditions of at least 15 kbar and about 500°C.

Areally Extensive Surface Bedrock Exposures on Mars: Many Are Clastic Rocks, Not Lavas

NASA Astrophysics Data System (ADS)

Rogers, A. Deanne; Warner, Nicholas H.; Golombek, Matthew P.; Head, James W.; Cowart, Justin C.

2018-02-01

Areally extensive exposures of intact olivine/pyroxene-enriched rock, as well as feldspar-enriched rock, are found in isolated locations throughout the Martian highlands. The petrogenetic origin(s) of these rock units are not well understood, but some previous studies favored an effusive volcanic origin partly on the basis of distinctive composition and relatively high thermal inertia. Here we show that the regolith development, crater retention, and morphological characteristics for many of these "bedrock plains" are not consistent with competent lavas and reinterpret the high thermal inertia orbital signatures to represent friable materials that are more easily kept free of comminution products through eolian activity. Candidate origins include pyroclastic rocks, impact-generated materials, or detrital sedimentary rocks. Olivine/pyroxene enrichments in bedrock plains relative to surrounding materials could have potentially formed through deflation and preferential removal of plagioclase.

GSK-3Beta-Dependent Activation of GEF-H1/ROCK Signaling Promotes LPS-Induced Lung Vascular Endothelial Barrier Dysfunction and Acute Lung Injury.

PubMed

Yi, Lei; Huang, Xiaoqin; Guo, Feng; Zhou, Zengding; Chang, Mengling; Huan, Jingning

2017-01-01

The bacterial endotoxin or lipopolysaccharide (LPS) leads to the extensive vascular endothelial cells (EC) injury under septic conditions. Guanine nucleotide exchange factor-H1 (GEF-H1)/ROCK signaling not only involved in LPS-induced overexpression of pro-inflammatory mediator in ECs but also implicated in LPS-induced endothelial hyper-permeability. However, the mechanisms behind LPS-induced GEF-H1/ROCK signaling activation in the progress of EC injury remain incompletely understood. GEF-H1 localized on microtubules (MT) and is suppressed in its MT-bound state. MT disassembly promotes GEF-H1 release from MT and stimulates downstream ROCK-specific GEF activity. Since glycogen synthase kinase (GSK-3beta) participates in regulating MT dynamics under pathologic conditions, we examined the pivotal roles for GSK-3beta in modulating LPS-induced activation of GEF-H1/ROCK, increase of vascular endothelial permeability and severity of acute lung injury (ALI). In this study, we found that LPS induced human pulmonary endothelial cell (HPMEC) monolayers disruption accompanied by increase in GSK-3beta activity, activation of GEF-H1/ROCK signaling and decrease in beta-catenin and ZO-1 expression. Inhibition of GSK-3beta reduced HPMEC monolayers hyper-permeability and GEF-H1/ROCK activity in response to LPS. GSK-3beta/GEF-H1/ROCK signaling is implicated in regulating the expression of beta-catenin and ZO-1. In vivo , GSK-3beta inhibition attenuated LPS-induced activation of GEF-H1/ROCK pathway, lung edema and subsequent ALI. These findings present a new mechanism of GSK-3beta-dependent exacerbation of lung micro-vascular hyper-permeability and escalation of ALI via activation of GEF-H1/ROCK signaling and disruption of intracellular junctional proteins under septic condition.

Acoustic Emission Characteristics of Red Sandstone Specimens Under Uniaxial Cyclic Loading and Unloading Compression

NASA Astrophysics Data System (ADS)

Meng, Qingbin; Zhang, Mingwei; Han, Lijun; Pu, Hai; Chen, Yanlong

2018-04-01

To explore the acoustic emission (AE) characteristics of rock materials during the deformation and failure process under periodic loads, a uniaxial cyclic loading and unloading compression experiment was conducted based on an MTS 815 rock mechanics test system and an AE21C acoustic emissions test system. The relationships among stress, strain, AE activity, accumulated AE activity and duration for 180 rock specimens under 36 loading and unloading rates were established. The cyclic AE evolutionary laws with rock stress-strain variation at loading and unloading stages were analyzed. The Kaiser and Felicity effects of rock AE activity were disclosed, and the impact of the significant increase in the scale of AE events on the Felicity effect was discussed. It was observed that the AE characteristics are closely related to the stress-strain properties of rock materials and that they are affected by the developmental state and degree of internal microcracks. AE events occur in either the loading or unloading stages if the strain is greater than zero. Evolutionary laws of AE activity agree with changes in rock strain. Strain deformation is accompanied by AE activity, and the density and intensity of AE events directly reflect the damage degree of the rock mass. The Kaiser effect exists in the linear elastic stage of rock material, and the Felicity effect is effective in the plastic yield and post-peak failure stages, which are divided by the elastic yield strength. This study suggests that the stress level needed to determine a significant increase in AE activity was 70% of the i + 1 peak stress. The Felicity ratio of rock specimens decreases with the growth of loading-unloading cycles. The cycle magnitude and variation of the Felicity effect, in which loading and unloading rates play a weak role, are almost consistent.

Selective oviposition of the mayfly Baetis bicaudatus.

PubMed

Encalada, Andrea C; Peckarsky, Barbara L

2006-06-01

Selective oviposition can have important consequences for recruitment limitation and population dynamics of organisms with complex life cycles. Temporal and spatial variation in oviposition may be driven by environmental or behavioral constraints. The goals of this study were to: (1) develop an empirical model of the substrate characteristics that best explain observed patterns of oviposition by Baetis bicaudatus (Ephemeroptera), whose females lay eggs under rocks protruding from high-elevation streams in western Colorado; and (2) test experimentally selective oviposition of mayfly females. We surveyed the number and physical characteristics of potential oviposition sites, and counted the number and density of egg masses in different streams of one watershed throughout two consecutive flight seasons. Results of surveys showed that variability in the proportion of protruding rocks with egg masses and the density of egg masses per rock were explained primarily by seasonal and annual variation in hydrology, and variation in geomorphology among streams. Moreover, surveys and experiments showed that females preferred to oviposit under relatively large rocks located in places with high splash associated with fast current, which may provide visual, mechanical or both cues to females. Experiments also showed that high densities of egg masses under certain rocks were caused by rock characteristics rather than behavioral aggregation of ovipositing females. While aggregations of egg masses provided no survival advantage, rocks selected by females had lower probabilities of desiccating during egg incubation. Our data suggest that even when protruding rocks are abundant, not all rocks are used as oviposition sites by females, due to female selectivity and to differences in rock availability within seasons, years, or streams depending on variation in climate and hydrogeomorphology. Therefore, specialized oviposition behavior combined with variation in availability of quality oviposition substrata has the potential to limit recruitment of this species.

Repair, Evaluation, Maintenance, and Rehabilitation Research Program. Geotechnical Aspects of Rock Erosion in Emergency Spillway Channels. Report 4. Geologic and Hydrodynamic Controls on the Mechanics of Knickpoint Migration

DTIC Science & Technology

1989-12-01

approval of the use of such commercial products. rrf .A’cierated croulon at a knickpoint produced by relatively I’vi sch argi slid unventing beneath...Report 4 of a Series Approved For Public Releae, Distilbution Unlimited Prepared for DEPARTMENT OF THE ARMY US Army Corps of Engineers Washington, DC...20314-1000 Under Civil Works Work Unit 32317 90 0.1 16 0 7 C The following two letters used as parl of the number designating technical reports of

Geology of the Barite Hill gold-silver deposit in the southern Carolina slate belt

USGS Publications Warehouse

Clark, S.H.B.; Gray, K.J.; Back, J.M.

1999-01-01

Barite Hill is a stratiform gold-silver deposit associated with base metal sulfides and barite in greenschist facies rocks. The deposit, southernmost of four recently mined gold deposits in the Carolina slate belt, is located in the Lincolnton-McCormick district of Georgia and South Carolina, which includes several known gold-silver and base metal deposits in a Kuroko-type geological setting along with deposits of kyanite and manganese. Approximately 1,835,000 g of gold was produced mainly from oxidized ores in the Main and Rainsford pits from 1990 until their closing in 1994. Ore is hosted by sericitically altered felsic metavolcanic and metasedimentary rocks of the Late Proterozoic Persimmon Fork Formation. The deposit is stratigraphically below an overturned contact between upper and lower pyroclastic units, which overlie the Lincolnton metarhyolite, an intrusive unit. Gold-silver-rich zones in the Main pit are partly coincident with lenses of siliceous barite rock, but not confined to them, and occur more commonly in pyrite-quartz-altered fragmental rock. The Main pit ore is stratigraphically overlain by a zone of base metal and barite enrichment, which is, in turn, overlain by a talc-tremolite alteration zone locally. Siliceous barite zones are absent in the Rainsford pit, and gold-silver minerals are associated with silicified rocks and chert. The Barite Hill deposit is interpreted to be the result of Kuroko-type, volcanogenic, base metal sulfide mineralization, followed by gold-silver mineralization under epithermal conditions with the following stages of evolution: (1) massive sulfides, barite, and fine-grained siliceous exhalites were deposited during Late Proterozoic to Cambrian submarine volcanism, which was related to plate convergence and subduction in a microcontinental or island-arc setting distant from the North American continental plate; (2) Au-Ag-Te and base and precious metal Te-Se-Bi minerals were deposited either during waning stages of hydrothermal activity in a failed massive sulfide system or in a separate event; (3) sulfides and silica-barite rock recrystallized during regional deformation and greenschist facies metamorphism related to the Middle to Late Ordovician collision of the Carolina terrane with the North American continental plate; (4) quartz, barite, and gold were remobilized and formed veins that cut across cleavage; (5) orebodies were offset along high-angle faults; and (6) during weathering, base metal sulfides and barite dissolved and reprecipitated as supergene euhedral barite crystals that line ferric iron oxide-hydroxide gossans.

Development of diagenetic seals in carbonates and sandstones

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmidt, V.; Almon, W.

1983-03-01

Diagenetic seals effectively block the movement of reservoir hydrocarbons in many sandstone and carbonate rock units. Diagenetic seals in sandstones and carbonate rocks encase reservoir rocks with either depositional or diagenetic porosity. Diagenetic reservoir porosity may originate before or after the establishment of an effective diagenetic seal. Hydrocarbon traps with diagenetic seals may conform in their geometry as well to structure or stratigraphy as to diagenetic facies. Therefore, some structural and stratigraphic traps may, in part or entirely, depend on diagenetic seals. Detailed analysis of diagenetic seals in sandstones and carbonate rocks can considerably improve our ability to predict theirmore » occurrence and to recognize their spatial and temporal relationship to reservoir rocks and hydrocarbon migration.« less

Structure of Masuleh Shear Zone: Evidence for Early–Middle Jurassic Dextral Shear Along Paleo-Tethys Suture Zone in the Western Alborz, NW Iran

NASA Astrophysics Data System (ADS)

Moosavi, E.; Rasouli-Jamadi, F.

2018-03-01

The Paleo-Tethys suture zone in northern Iran was formed when the Paleo-Tethys Ocean, (between Gonwana-derived Alborz Microcontinent and the Turan Plate), closed during the Eocimmerian orogeny and after they collided together in the Mid-Late Triassic. The NW-striking Boghrov-Dagh basement Fault Zone that lies in the vicinity of Masuleh village and the southern boundary of Gasht Metamorphic Complex is a part of the Eocimmerian suture zone in the Western Alborz. Along this part of the suture zone, tourmaline leucogranites intruded in metamorphic rocks. We recognize three distinct deformation stages (D1 to D3) in the study area especially in the Masuleh Shear Zone. D1 which was synchronous with formation of the main metamorphic minerals, such as sillimanite and staurolite under medium- to high-grade metamorphic conditions probably during the Hercynian event and a NE-directed shortening. The slaty cleavage in metamorphosed Upper Paleozoic rocks and crenulation cleavage and folds in the older rocks were produced due to D2 deformation during the Eocimmerian event under greenschist facies conditions. The Masuleh Shear Zone formed as a result of a ductile strike-slip shear during the Early-Middle Jurassic Mid-Cimmerian D3 event with a pure dextral to transtension shear sense at low to locally medium-grade conditions. All of the D3 structural features agree with a NNW-directed compression and an ENE-directed extension caused by overall dextral shear parallel to the Masuleh shear zone and the Boghrov-Dagh Fault Zone. Based on the available evidence, especially cross-cutting relationships between structural fabrics and rock units, emplacement of the Gasht-Masuleh leucogranites occurred after the D2 collisional event coeval to the possible slab break-off and before the D3 event, between Eocimmerian and Mid-Cimmerian movements.

A multidisciplinary approach for the characterisation of fault zones in geothermal areas in central Mexico

NASA Astrophysics Data System (ADS)

Comina, Cesare; Ferrero, Anna Maria; Mandrone, Giuseppe; Vinciguerra, Sergio

2017-04-01

There are more than 500 geothermal areas in the Trans-Mexican Volcanic Belt of central Mexico. Of these, two are presently object of a transnational project between EU and Mexico (GEMex): Acoculco, where there is already a commercial exploitation, and Los Humeros, at present not developed yet. The GEMex project aims to improve the resource assessment and the reservoir characterization using novel geophysical and geological methods and interpretations. One of the main issues controlling the geothermal system is the presence of pervasive fracture systems affecting the carbonatic basements underlying the volcanic complex (basalts and andesites). We propose the characterization of rock masses (rock and fractures) using a multiscale analysis, from the field to the outcrop up to the micro scale integrating a number of techniques. In detail, the University of Torino unit will take care of: 1) Technical field studies aimed to the characterization of the mechanical transitions throughout brittle deformation zones, from the intact rock, to the damage zone to the shear/slip zone; moreover, key geophysical parameters (seismic and electrical properties) will be measured; 2) Petrophysical and minero-petrographic detailed studies on representative samples will be performed at room temperature; verification of the mechanical properties of the samples subjected to cycles of heating up to the temperatures of the reservoir (> 400 °C) will be done; measurements of the geophysical properties of the samples will be done in comparison with the measures in place. 3) Numerical modeling to estimate the petrophysical, geophysical and geomechanical properties of the rock mass under the P and T conditions of the reservoir (i.e., using Comsol, VGeST, UDEC, 3DEC, ...). Detailed geological field studies and photogrammetry/laser scanner imaging of studied outcrops are supposed to be available soon: multiscale analysis will benefis from these new data. Results will be shared between EU and Mexican partners to improve the general model of these two geothermal field.

Geology and ground-water resources of the northern part of the Ranegras Plain area, Yuma County, Arizona

USGS Publications Warehouse

Metzger, Donald George

1951-01-01

The Ranegras Plain area is part of the Basin and Range province in west-central Arizona. The report discusses rocks of pre-Cambrian, pre-Cambrian (?), Paleozoic (?), Mesozoic (?), Cretaceous (?), Cretaceous and Tertiary, Tertiary (?), Quaternary (?), and Quaternary age. All the Paleozoic (?) and Cretaceous (?) rocks and parts of the Mesozoic (?),Cretaceous and Tertiary, and Tertiary (?) rocks have been mapped as a unit because they are so intensely faulted that detailed mapping was not practical. Rocks older than Quaternary form the mountain ranges bordering the Ranegras Plain. Quaternary alluvium underlies the broad, gently sloping valley floor to depths of generally a few hundred feet, locally more. Well logs indicate that the underlying Tertiary (?) alluvium exceeds 1,100 feet in thickness. The structure of the area is controlled by faulting typical of the Basin and Range province, but the major faults are covered by alluvium and are inferred from topographic features. Ground water occurs in Quaternary and Tertiary (?) alluvium and the best aquifers are in sand and gravel of the Quaternary alluvium. Ground-water movement is, in general, to the northwest. Recharge to the aquifers is predominantly from stream flow resulting from heavy rains. There is also minor or unevaluated recharge from underflow from Butler Valley to the east, andsince 1948seepage from irrigation. Discharge is by pumping and by natural processes of underflow and evapotranspiration. In addition to small domestic and stock wells, only two irrigation wells, in the vicinity of Utting, are in use. No accurate data on pumpage are available. The safe yield from the ground-water reservoir may be less than 5,000 acre-feet and probably does not exceed 10,000 to 15,000 acre-feet per year. The quality of ground water ranges from permissible to unsuitable for irrigation purposes. The fluoride content is generally too high for the water to be considered satisfactory for use by young children.

Petroleum geology and resources of the North Ustyurt Basin, Kazakhstan and Uzbekistan

USGS Publications Warehouse

Ulmishek, Gregory F.

2001-01-01

The triangular-shaped North Ustyurt basin is located between the Caspian Sea and the Aral Lake in Kazakhstan and Uzbekistan and extends offshore both on the west and east. Along all its sides, the basin is bounded by the late Paleozoic and Triassic foldbelts that are partially overlain by Jurassic and younger rocks. The basin formed on a cratonic microcontinental block that was accreted northward to the Russian craton in Visean or Early Permian time. Continental collision and deformation along the southern and eastern basin margins occurred in Early Permian time. In Late Triassic time, the basin was subjected to strong compression that resulted in intrabasinal thrusting and faulting. Jurassic-Tertiary, mostly clastic rocks several hundred meters to 5 km thick overlie an older sequence of Devonian?Middle Carboniferous carbonates, Upper Precambrian massifs and deformed Caledonian foldbelts. The Carboniferous?Lower Permian clastics, carbonates, and volca-basement is at depths from 5.5 km on the highest uplifts to 11 nics, and Upper Permian?Triassic continental clastic rocks, pri-km in the deepest depressions. marily red beds. Paleogeographic conditions of sedimentation, Three total petroleum systems are identified in the basin. the distribution of rock types, and the thicknesses of pre-Triassic Combined volumes of discovered hydrocarbons in these sysstratigraphic units are poorly known because the rocks have been tems are nearly 2.4 billion barrels of oil and 2.4 trillion cubic penetrated by only a few wells in the western and eastern basin feet of gas. Almost all of the oil reserves are in the Buzachi Arch areas. The basement probably is heterogeneous; it includes and Surrounding Areas Composite Total Petroleum System in 2 Petroleum Geology, Resources?North Ustyurt Basin, Kazakhstan and Uzbekistan the western part of the basin. Oil pools are in shallow Jurassic and Neocomian sandstone reservoirs, in structural traps. Source rocks are absent in the total petroleum system area; therefore, the oil could have migrated from the adjacent North Caspian basin. The North Ustyurt Jurassic Total Petroleum System encompasses the rest of the basin area and includes Jurassic and younger rocks. Several oil and gas fields have been discovered in this total petroleum system. Oil accumulations are in Jurassic clastic reservoirs, in structural traps at depths of 2.5?3 km. Source rocks for the oil are lacustrine beds and coals in the continental Jurassic sequence. Gas fields are in shallow Eocene sandstones in the northern part of the total petroleum system. The origin of the gas is unknown. The North Ustyurt Paleozoic Total Petroleum System stratigraphically underlies the North Ustyurt Jurassic system and occupies the same geographic area. The total petroleum system is almost unexplored. Two commercial flows of gas and several oil and gas shows have been tested in Carboniferous shelf carbonates in the eastern part of the total petroleum system. Source rocks probably are adjacent Carboniferous deep-water facies interpreted from seismic data. The western extent of the total petroleum system is conjectural. Almost all exploration drilling in the North Ustyurt basin has been limited to Jurassic and younger targets. The underlying Paleozoic-Triassic sequence is poorly known and completely unexplored. No wells have been drilled in offshore parts of the basin. Each of three total petroleum systems was assessed as a single assessment unit. Undiscovered resources of the basin are small to moderate. Most of the undiscovered oil probably will be discovered in Jurassic and Neocomian stratigraphic and structural traps on the Buzachi arch, especially on its undrilled off-shore extension. Most of the gas discoveries are expected to be in Paleozoic carbonate reservoirs in the eastern part of the basin.

Correlation of Rock Spectra with Quantitative Morphologic Indices: Evidence for a Single Rock Type at the Mars Pathfinder Landing Site

NASA Technical Reports Server (NTRS)

Yingst, R. A.; Biedermann, K. L.; Pierre, N. M.; Haldemann, A. F. C.; Johnson, J. R.

2005-01-01

The Mars Pathfinder (MPF) landing site was predicted to contain a broad sampling of rock types varying in mineralogical, physical, mechanical and geochemical characteristics. Although rocks have been divided into several spectral categories based on Imager for Mars Pathfinder (IMP) visible/near-infrared data, efforts in isolating and classifying spectral units among MPF rocks and soils have met with varying degrees of success, as many factors influencing spectral signatures cannot be quantified to a sufficient level to be removed. It has not been fully determined which spectral categories stem from intrinsic mineralogical differences between rocks or rock surfaces, and which result from factors such as physical or chemical weathering. This has made isolation of unique rock mineralogies difficult. Morphology, like composition, is a characteristic tied to the intrinsic properties and geologic and weathering history of rocks. Rock morphologies can be assessed quantitatively and compared with spectral data, to identify and classify rock types at the MPF landing site. They can also isolate actual rock spectra from spectral types that are surficial in origin, as compositions associated with mantling dust or chemical coatings would presumably not influence rock morphology during weathering events. We previously reported on an initial classification of rocks using the quantitative morphologic indices of size, roundness, sphericity and elongation. Here, we compare this database of rock characteristics with associated rock surface spectra to improve our ability to discriminate between spectra associated with rock types and those from other sources.

Hydrogeology and ground-water quality of northern Bucks County, Pennsylvania

USGS Publications Warehouse

Sloto, Ronald A.; Schreffler, Curtis L.

1994-01-01

Water from wells in the crystalline rocks has the lowest median pH (5.8), the lowest median specific conductance (139 microsiemens per centimeter), the lowest median alkalinity [16 mg/L (milligrams per liter) as CaCOg], and the highest dissolved oxygen concentration (9.0 mg/L) of the hydrogeologic units. Water from wells in carbonate rocks has the highest median pH (7.8) and the highest median alkalinity (195 mg/L as CaCO3) of the hydrogeologic units. Water from wells in the Lockatong Formation has the highest median specific conductance (428 microsiemens per centimeter) and the lowest dissolved oxygen concentration (0.8 mg/L) of the hydrogeologic units. Water from wells in crystalline rocks contains the lowest concentrations of total dissolved solids (TDS) of the hydrogeologic units. Water from the Lockatong Formation contains the highest concentration of TDS of the hydrogeologic units. Water from only 1 of 83 wells sampled exceeded the U.S. Environmental Protection Agency (USEPA) secondary maximum contaminant level (SMCL) for TDS; the well is in the Lockatong Formation. Five of 86 samples (6 percent) and 6 of 75 samples (8 percent) exceed the USEPA SMCL for iron and manganese, respectively. Nitrate is the most prevalent nitrogen species in ground water. The median nitrate concentration for all hydrogeologic units is 2.3 mg/L. Of 71 water samples from wells, no concentrations of nitrate exceed the USEPA maximum contaminant level. The median dissolved radon-222 activity was highest for water samples from wells in crystalline rock [3,600 pCi/L (picocuries per liter)] and lowest for water samples from wells in the Lockatong Formation (340 pCi/L) and diabase (350 pCi/L). Water samples for analysis for volatile organic compounds (VOC's) were collected from 34 wells in areas where the potential existed for the presence of VOC's in ground water. VOC's were detected in 23 percent of the 34 wells sampled. The most commonly detected compound was trichloroethylene (13 percent of sampled wells).

Landslide overview map of the conterminous United States

USGS Publications Warehouse

Radbruch-Hall, Dorothy H.; Colton, Roger B.; Davies, William E.; Lucchitta, Ivo; Skipp, Betty A.; Varnes, David J.

1982-01-01

The accompanying landslide overview map of the conterminous United States is one of a series of National Environmental Overview Maps that summarize geologic, hydrogeologic, and topographic data essential to the assessment of national environmental problems. The map delineates areas where large numbers of landslides exist and areas which are susceptible to landsliding. It was prepared by evaluating the geologic map of the United States and classifying the geologic units according to high, medium, or low landslide incidence (number) and high, medium, or low susceptibility to landsliding. Rock types, structures, topography, precipitation, landslide type, and landslide incidence are mentioned for each physical subdivision of the United States. The differences in slope stability between the Colorado Plateau, the Appalachian Highlands, the Coast Ranges of California, and the Southern Rocky Mountains are compared in detail, to illustrate the influence of various natural factors on the types of landsliding that occur in regions having different physical conditions. These four mountainous regions are among the most landslide-prone areas in the United States. The Colorado Plateau is a deformed platform where interbedded sedimentary rocks of varied lithologic properties have been gently warped and deeply eroded. The rocks are extensively fractured. Regional fracture systems, joints associated with individual geologic structures, and joints parallel to topographic surfaces, such as cliff faces, greatly influence slope stability. Detached blocks at the edges of mesas, as well as columns, arched recesses, and many natural arches on the Colorado Plateau, were formed wholly or in part by mass movement. In the Appalachian Highlands, earth flows, debris flows, and debris avalanches predominate in weathered bedrock and colluvium. Damaging debris avalanches result when persistent steady rainfall is followed by a sudden heavy downpour. Landsliding in unweathered bedrock is controlled locally by joint systems similar to those on the Colorado Plateau. In some places, outward gravitational movement of valley walls due to stress release has formed anticlines and caused thrusting in the center of valleys. In the Coast Ranges of California, slopes are steep, and rocks are varied and extensively deformed. One of the most slide-prone terrains of the Coast Ranges is the tectonic melange of the Franciscan assemblage, on which huge masses of debris are moving slowly downslope. In southern California, debris flows generated by soil slips are particularly damaging. Similar flows are common in poorly consolidated Tertiary rocks of the central part of the State. Like the debris avalanches of the Appalachian Highlands, the flows form during intense rainfall after previous steady rain. The Southern Rocky Mountains are complex in rock type and climate, so that the landslides there are also complex. Slides range from rock-falls at one extreme to slumps and debris flows at the other. They include ?sackungen,? which are distinguished by ridgetop grabens associated with uphill-facing scarps on ridge sides, both features of gravitational origin. Extensive regional joint patterns have not been recognized, and shallow soil slips are only a minor hazard.

Location-Related Differences in Weathering Behaviors and Populations of Culturable Rock-Weathering Bacteria Along a Hillside of a Rock Mountain.

PubMed

Wang, Qi; Wang, Rongrong; He, Linyan; Sheng, Xiafang

2017-05-01

Bacteria play important roles in rock weathering, elemental cycling, and soil formation. However, little is known about the weathering potential and population of bacteria inhabiting surfaces of rocks. In this study, we isolated bacteria from the top, middle, and bottom rock samples along a hillside of a rock (trachyte) mountain as well as adjacent soils and characterized rock-weathering behaviors and populations of the bacteria. Per gram of rock or surface soil, 10 6 -10 7 colony forming units were obtained and total 192 bacteria were isolated. Laboratory rock dissolution experiments indicated that the proportions of the highly effective Fe (ranging from 67 to 92 %), Al (ranging from 40 to 48 %), and Cu (ranging from 54 to 81 %) solubilizers were significantly higher in the top rock and soil samples, while the proportion of the highly effective Si (56 %) solubilizers was significantly higher in the middle rock samples. Furthermore, 78, 96, and 6 % of bacteria from the top rocks, soils, and middle rocks, respectively, significantly acidified the culture medium (pH < 4.0) in the rock dissolution process. Most rock-weathering bacteria (79 %) from the rocks were different to those from the soils and most of them (species level) have not been previously reported. Furthermore, location-specific rock-weathering bacterial populations were found and Bacillus species were the most (66 %) frequently isolated rock-weathering bacteria in the rocks based on cultivation methods. Notably, the top rocks and soils had the highest and lowest diversity of rock-weathering bacterial populations, respectively. The results suggested location-related differences in element (Si, Al, Fe, and Cu) releasing effectiveness and communities of rock-weathering bacteria along the hillside of the rock mountain.

HiRISE Characterization of Thermophysical Units at Acidalia Planitia, Mars

NASA Astrophysics Data System (ADS)

Martinez-Alonso, S.; Mellon, M. T.; Rafkin, S. C. R.; Zurek, R. W.; McEwen, A. S.; Putzig, N. E.; Searls, M. L.; HiRISE Team

2008-03-01

As part of an ongoing effort to characterize with HiRISE data the global thermophysical units in Mars, we report results regarding a region of Acidalia Planitia, which includes the largest outcrop of thermophysical unit F (rocks, bedrock, duricrust) on the planet.

Hydrogeologic framework of the middle San Pedro watershed, southeastern Arizona

USGS Publications Warehouse

Dickinson, Jesse; Kennedy, Jeffrey R.; Pool, D.R.; Cordova, Jeffrey T.; Parker, John T.; Macy, J.P.; Thomas, Blakemore

2010-01-01

Water managers in rural Arizona are under increasing pressure to provide sustainable supplies of water despite rapid population growth and demands for environmental protection. This report describes the results of a study of the hydrogeologic framework of the middle San Pedro watershed. The components of this report include: (1) a description of the geologic setting and depositional history of basin fill sediments that form the primary aquifer system, (2) updated bedrock altitudes underlying basin fill sediments calculated using a subsurface density model of gravity data, (3) delineation of hydrogeologic units in the basin fill using lithologic descriptions in driller's logs and models of airborne electrical resistivity data, (4) a digital three-dimensional (3D) hydrogeologic framework model (HFM) that represents spatial extents and thicknesses of the hydrogeologic units (HGUs), and (5) description of the hydrologic properties of the HGUs. The lithologic interpretations based on geophysical data and unit thickness and extent of the HGUs included in the HFM define potential configurations of hydraulic zones and parameters that can be incorporated in groundwater-flow models. The hydrogeologic framework comprises permeable and impermeable stratigraphic units: (1) bedrock, (2) sedimentary rocks predating basin-and-range deformation, (3) lower basin fill, (4) upper basin fill, and (5) stream alluvium. The bedrock unit includes Proterozoic to Cretaceous crystalline rocks, sedimentary rocks, and limestone that are relatively impermeable and poor aquifers, except for saturated portions of limestone. The pre-basin-and-range sediments underlie the lower basin fill but are relatively impermeable owing to cementation. However, they may be an important water-bearing unit where fractured. Alluvium of the lower basin fill, the main water-bearing unit, was deposited in the structural trough between the uplifted ridges of bedrock and (or) pre-basin-and-range sediments. Alluvium of the upper basin fill may be more permeable than the lower basin fill, but it is generally unsaturated in the study area. The lower basin fill stratigraphic unit was delineated into three HGUs on the basis of lithologic descriptions in driller?s logs and one-dimensional (1D) electrical models of airborne transient electromagnetic (TEM) surveys. The interbedded lower basin fill (ILBF) HGU represents an upper sequence having resistivity values between 5 and 40 ohm-m identified as interbedded sand, gravel, and clay in driller?s logs. Below this upper sequence, fine-grained lower basin fill (FLBF) HGU represents a thick silt and clay sequence having resistivity values between 5 and 20 ohm-m. Within the coarse-grained lower basin fill (CLBF) HGU, which underlies the silt and clay of the FLBF, the resistivity values on logs and 1D models increase to several hundred ohm-m and are highly variable within sand and gravel layers. These sequences match distinct resistivity and lithologic layers identified by geophysical logs in the adjacent Sierra Vista subwatershed, suggesting that these sequences are laterally continuous within both the Benson and Sierra Vista subwatersheds in the Upper San Pedro Basin. A subsurface density model based on gravity data was constructed to identify the top of bedrock and structures that may affect regional groundwater flow. The subsurface density model contains six layers having uniform density values, which are assigned on the basis of geophysical logs. The density values for the layers range between 1.65 g/cm3 for unsaturated sediments near the land surface and 2.67 g/cm3 for bedrock. Major features include three subbasins within the study area, the Huachuca City subbasin, the Tombstone subbasin, and the Benson subbasin, which have no expression in surface topography or lithology. Bedrock altitudes from the subsurface density model defined top altitudes of the bedrock HGU. The HFM includes the following HGUs in ascending stratigr

Macrostrat and GeoDeepDive: A Platform for Geological Data Integration and Deep-Time Research

NASA Astrophysics Data System (ADS)

Husson, J. M.; Peters, S. E.; Ross, I.; Czaplewski, J. J.

2016-12-01

Characterizing the quantity, lithology, age, and properties of rocks and sediments in the upper crust is central to many questions in Earth science. Although a large number of geological maps, regional syntheses, and sample-based measurements have been published in a variety of formats, there is no system for integrating and accessing rock record-derived data or for facilitating the large-scale quantitative interrogation of the physical, chemical, and biological properties of Earth's crust. Here we describe two data resources that aim to overcome some of these limitations: 1) Macrostrat, a geospatial database and supporting cyberinfrastructure that is designed to enable quantitative analyses of the entire assemblage of surface and subsurface sedimentary, igneous and metamorphic rocks, and 2) GeoDeepDive, a digital library and high throughput computing system designed to facilitate the location and extraction of information and data from the published literature. Macrostrat currently contains general summaries of the age and lithology of rocks and sediments in the upper crust at 1,474 regions in North and Central America, the Caribbean, New Zealand, and the deep sea. Distributed among these geographic regions are nearly 34,000 lithologically and chronologically-defined geological units, many of which are linked to a bedrock geologic map database with more than 1.7 million globally distributed units. Sample-derived data, including fossil occurrences in the Paleobiology Database and more than 180,000 geochemical and outcrop-derived measurements are linked to Macrostrat units and/or lithologies within those units. The rock names, lithological terms, and geological time intervals that are applied to Macrostrat units define a hierarchical, spatially and temporally indexed vocabulary that is leveraged by GeoDeepDive in order to provide researchers access to data within the scientific literature as it is published and ingested into the infrastructure. All data in Macrostrat are accessible via an Application Programming Interface, which enables the development of mobile and analytical applications. The GeoDeepDive infrastructure also supports the development and execution of applications that are tailored to the specific, literature-based data location and extraction needs of geoscientists.

DISCRIMINATION OF ALTERED BASALTIC ROCKS IN THE SOUTHWESTERN UNITED STATES BY ANALYSIS OF LANDSAT THEMATIC MAPPER DATA.

USGS Publications Warehouse

Davis, Philip A.; Berlin, Graydon L.; Chavez, Pat S.

1987-01-01

Landsat Thematic Mapper image data were analyzed to determine their ability to discriminate red cone basalts from gray flow basalts and sedimentary country rocks for three volcanic fields in the southwestern United States. Analyses of all of the possible three-band combinations of the six nonthermal bands indicate that the combination of bands 1, 4, and 5 best discriminates among these materials. The color-composite image of these three bands unambiguously discriminates 89 percent of the mapped red volcanic cones in the three volcanic fields. Mineralogic and chemical analyses of collected samples indicate that discrimination is facilitated by the presence of hematite as a major mineral phase in the red cone basalts (hematite is only a minor mineral phase in the gray flow basalts and red sedimentary rocks).

Mapping known and potential mineral occurrences and host rocks in the Bonnifield Mining District using minimal cloud- and snow-cover ASTER data: Chapter E in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

USGS Publications Warehouse

Hubbard, Bernard E.; Dusel-Bacon, Cynthia; Rowan, Lawrence C.; Eppinger, Robert G.; Gough, Larry P.; Day, Warren C.

2007-01-01

On July 8, 2003, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor acquired satellite imagery of a 60-kilometer-wide swath covering a portion of the Bonnifield mining district within the southernmost part of the Tintina Gold Province, Alaska, under unusually favorable conditions of minimal cloud and snow cover. Although rocks from more than eight different lithotectonic terranes are exposed within the extended swath of data, we focus on volcanogenic massive sulfides (VMS) and porphyry deposits within the Yukon-Tanana terrane (YTT), the largest Mesozoic accretionary terrane exposed between the Denali fault system to the south of Fairbanks and the Tintina fault system to the north of Fairbanks. Comparison of thermal-infrared region (TIR) decorrelation stretch data to available geologic maps indicates that rocks from the YTT contain a wide range of rock types ranging in composition from mafic metavolcanic rocks to felsic rock types such as metarhyolites, pelitic schists, and quartzites. The nine-band ASTER visible-near-infrared region--short-wave infrared region (VNIR-SWIR) reflectance data and spectral matched-filter processing were used to map hydrothermal alteration patterns associated with VMS and porphyry deposit types. In particular, smectite, kaolinite, opaline silica, jarosite and (or) other ferric iron minerals defined narrow (less than 250-meter diameter) zonal patterns around Red Mountain and other potential VMS targets. Using ASTER we identified some of the known mineral deposits in the region, as well as mineralogically similar targets that may represent potential undiscovered deposits. Some known deposits were not identified and may have been obscured by vegetation or snow cover or were too small to be resolved.

Layered-to-Rock-Salt Transformation in Desodiated Na xCrO 2 ( x 0.4)

DOE PAGES

Bo, Shou-Hang; Li, Xin; Toumar, Alexandra J.; ...

2016-02-01

O3 layered sodium transition metal oxides (i.e., NaMO 2, M = Ti, V, Cr, Mn, Fe, Co, Ni) are a promising class of cathode materials for Na-ion battery applications. These materials, however, all suffer from severe capacity decay when the extraction of Na exceeds certain capacity limits. Understanding the causes of this capacity decay is critical to unlocking the potential of these materials for battery applications. In this work, we investigate the structural origins of capacity decay for one of the compounds in this class, NaCrO 2. The (de)sodiation processes of NaCrO 2 were studied both in situ and exmore » situ through X-ray and electron diffraction measurements. We demonstrate that Na xCrO 2 (0 < x < 1) remains in the layered structural framework without Cr migration up to a composition of Na 0.4CrO 2. Further removal of Na beyond this composition triggers a layered-to-rock-salt transformation, which converts P'3-Na 0.4CrO 2 into the rock-salt CrO 2 phase. This structural transformation proceeds via the formation of an intermediate O3 Na δCrO 2 phase that contains Cr in both Na and Cr slabs and shares very similar lattice dimensions with those of rock-salt CrO 2. It is intriguing to note that intercalation of alkaline ions (i.e., Na + and Li + ) into the rock-salt CrO 2 and O3 Na δCrO 2 structures is actually possible, albeit in a limited amount (~0.2 per formula unit). When these results were analyzed under the context of electrochemistry data, it was apparent that preventing the layered-to-rock-salt transformation is crucial to improve the cyclability of NaCrO 2. Possible strategies for mitigating this detrimental phase transition are proposed.« less

Gas Transport through Fractured Rock near the U20az Borehole, Pahute Mesa, Nevada.

NASA Astrophysics Data System (ADS)

Rockhold, M.; Lowrey, J. D.; Kirkham, R.; Olsen, K.; Waichler, S.; White, M. D.; Wurstner White, S.

2017-12-01

Field experiments were performed in 2012-13 and 2016-17 at the U-20az testbed at the Nevada National Security Site to develop and evaluate capabilities for monitoring and modeling noble gas transport associated with underground nuclear explosions (UNE). Experiments were performed by injecting both chemical (CF2BR2, SF6) and radioactive (37Ar, 127Xe) gas species into the deep subsurface at this legacy UNE site and monitoring the breakthrough of the gases at different locations on or near the ground surface. Gas pressures were also monitored in both the chimney and at ground surface. Field experiments were modeled using the parallel, non-isothermal, two-phase flow and transport simulator, STOMP-GT. A site conceptual-numerical model was developed from a geologic framework model, and using a dual-porosity/permeability model for the constitutive relative permeability-saturation-capillary pressure relations of the fractured rock units. Comparisons of observed and simulated gas species concentrations show that diffusion is a highly effective transport mechanism under ambient conditions in the water-unsaturated fractured rock. Over-pressurization of the cavity during one of the field campaigns, and barometric pressure fluctuations are shown to result in enhanced gas transport by advection through fractures.

KSC-2011-6470

NASA Image and Video Library

2011-08-13

CAPE CANAVERAL, Fla. -- In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, preparations are under way to stow the robotic arm on the Mars Science Laboratory (MSL) rover, Curiosity. The arm will hold and maneuver instruments that will help scientists analyze Martian rocks and soil. Much like a human arm, the robotic arm has flexibility through shoulder, elbow, and wrist joints that permit the arm to extend, bend, and angle precisely against rocks and soil to grind away layers, take microscopic images and analyze their elemental composition. At the end of the arm is a hand-like structure, the turret, for holding various tools that can spin through a 350-degree turning range. A United Launch Alliance Atlas V-541 configuration will be used to loft MSL into space. Curiosity’s 10 science instruments are designed to search for evidence on whether Mars has had environments favorable to microbial life, including chemical ingredients for life. The unique rover will use a laser to look inside rocks and release its gasses so that the rover’s spectrometer can analyze and send the data back to Earth. MSL is scheduled to launch Nov. 25 from Space Launch Complex 41 on Cape Canaveral Air Force Station in Florida. For more information, visit http://www.nasa.gov/msl. Photo credit: NASA/Charisse Nahser

Structural analysis for metavolcanics and their metapyroclastics at gold deposit of the Mahd Ad Dahab area, Arabian Shield, Saudi Arabia

NASA Astrophysics Data System (ADS)

Kassem, Osama M. K.; Al Bassam, Abdel Aziz M.; Zaidi, Faisal K.

2013-11-01

The present study focuses on the gold mining in Mahd Ad Dahab region of Saudi Arabia. The study aims to assess the spatial relationship between tectonic contacts in Mahd Ad Dahab area and to provide a meaningful hypothesis relating gold metallogeny to the evolution of the Arabian Shield. Distribution and localization of gold occurrences in the study area was envisaged based on the different styles of microstructures and the major deformation phases affecting the area. The detailed petrographical and mineralogical investigations indicate that the metavolcanic rocks at the Mahd Ad Dahab gold mine area can be classified into metabasalt, metaandesite, and the felsic varieties (metadacite, metarhyodacite and metarhyolite) associating their metapyroclastics (conglomerate and tuffs). Furthermore, quartz forms allotriomorphic crystals which exhibit wavy extinction, deformational lamina and foliation due to subsequent deformations. Furthermore, we conclude that finite strain in the deformed rocks is of the same order of magnitude for all units of metavolcano-sedimentary rocks. Furthermore, contacts formed during intrusion of plutons with some faults in the Mahd Ad Dahab area under brittle to semi-ductile deformation conditions. In this case, finite strain accumulated during superimposed deformation on the already assembled nappe structure. It indicates that the contacts formed during the accumulation of finite strain.

A low-angle detachment fault revealed: Three-dimensional images of the S-reflector fault zone along the Galicia passive margin

NASA Astrophysics Data System (ADS)

Schuba, C. Nur; Gray, Gary G.; Morgan, Julia K.; Sawyer, Dale S.; Shillington, Donna J.; Reston, Tim J.; Bull, Jonathan M.; Jordan, Brian E.

2018-06-01

A new 3-D seismic reflection volume over the Galicia margin continent-ocean transition zone provides an unprecedented view of the prominent S-reflector detachment fault that underlies the outer part of the margin. This volume images the fault's structure from breakaway to termination. The filtered time-structure map of the S-reflector shows coherent corrugations parallel to the expected paleo-extension directions with an average azimuth of 107°. These corrugations maintain their orientations, wavelengths and amplitudes where overlying faults sole into the S-reflector, suggesting that the parts of the detachment fault containing multiple crustal blocks may have slipped as discrete units during its late stages. Another interface above the S-reflector, here named S‧, is identified and interpreted as the upper boundary of the fault zone associated with the detachment fault. This layer, named the S-interval, thickens by tens of meters from SE to NW in the direction of transport. Localized thick accumulations also occur near overlying fault intersections, suggesting either non-uniform fault rock production, or redistribution of fault rock during slip. These observations have important implications for understanding how detachment faults form and evolve over time. 3-D seismic reflection imaging has enabled unique insights into fault slip history, fault rock production and redistribution.

Distribution, facies, ages, and proposed tectonic associations of regionally metamorphosed rocks in east- and south-central Alaska

USGS Publications Warehouse

Dusel-Bacon, Cynthia; Csejtey, Bela; Foster, Helen L.; Doyle, Elizabeth O.; Nokleberg, Warren J.; Plafker, George

1993-01-01

Most of the exposed bedrock in east- and south-central Alaska has been regionally metamorphosed and deformed during Mesozoic and early Cenozoic time. All the regionally metamorphosed rocks are assigned to metamorphic-facies units on the basis of their temperature and pressure conditions and metamorphic age. North of the McKinley and Denali faults, the crystalline rocks of the Yukon- Tanana upland and central Alaska Range compose a sequence of dynamothermally metamorphosed Paleozoic and older(?) metasedimentary rocks and metamorphosed products of a Devonian and Mississippian continental-margin magmatic arc. This sequence was extensively intruded by postmetamorphic mid-Cretaceous and younger granitoids. Many metamorphic-unit boundaries in the Yukon-Tanana upland are low-angle faults that juxtapose units of differing metamorphic grade, which indicates that metamorphism predated final emplacement of the fault-bounded units. In some places, the relation of metamorphic grade across a fault is best explained by contractional faulting; in other places, it is suggestive of extensional faulting.Near the United States-Canadian border in the central Yukon- Tanana upland, metamorphism, plutonism, and thrusting occurred during a latest Triassic and Early Jurassic event that presumably resulted from the accretion of a terrane that had affinities to the Stikinia terrane onto the continental margin of North America. Elsewhere in the Yukon-Tanana upland, metamorphic rocks give predominantly late Early Cretaceous isotopic ages. These ages are interpreted to date either the timing of a subsequent Early Cretaceous episode of crustal thickening and metamorphism or, assuming that these other areas were also originally heated during the latest Triassic to Early Jurassic and remained buried, the timing of their uplift and cooling. This uplift and cooling may have resulted from extension.South of the McKinley and Denali faults and north of the Border Ranges fault system, medium-grade metamorphism across much of the southern Peninsular and Wrangellia terranes was early to synkinematic with the intrusion of tonalitic and granodioritic plutons of primarily Early and Middle Jurassic age in the Peninsular terrane and Late Jurassic age in the Wrangellia terrane. Areas metamorphosed during the Jurassic episode that crop out near the Border Ranges fault system were subsequently retrograded and deformed in Cretaceous and early Tertiary time during accretion of younger units to the south. North of the Jurassic metamorphic and plutonic complex, low-grade metamorphism affected the rest of the Wrangellia terrane sometime during Jurassic and (or) Cretaceous time.North of the Wrangellia terrane and immediately south of the McKinley and Denali faults, flyschoid rocks, which were deposited within a basin that separated the Wrangellia terrane from the western margin of North America, form a northeastward-tapering wedge. Within the western half of the wedge, flysch and structurally interleaved tectonic fragments were highly deformed and weakly metamorphosed; much of the metamorphism and deformation probably occurred sometime during mid- to Late Cretaceous time. In the eastern half of the wedge, flyschoid rocks form an intermediate-pressure Barrovian sequence (Maclaren metamorphic belt). Metamorphism of the Maclaren metamorphic belt was synkinematic with the Late Cretaceous to earliest Tertiary intrusion of foliated plutons of intermediate composition. Isotopic data suggest metamorphism extended into the early Tertiary and was accompanied by rapid uplift and cooling. Low- to medium-grade metamorphism throughout the wedge was probably associated with the accretion of the outboard Wrangellia terrane, as has been proposed for the Maclaren metamorphic belt.South of the Border Ranges fault system lie variably metamorphosed sequences of oceanic rocks that comprise the successively accreted Chugach, Yakutat, Ghost Rocks, and Prince William terranes. The Chugach terrane consists of three successively accreted sequences of differing metamorphic histories. Metamorphism in all the sequences was associated with north-directed underthrusting beneath either the combined Peninsular-Wrangellia terrane or the older and inner parts of the Chugach terrane. These sequences, from innermost to outermost are: (1) intermediate- to highpressure, transitional greenschist- to blueschist-facies metabasalt and metasedimentary rocks that were metamorphosed during the Early and Middle Jurassic; (2) prehnite-pumpellyite-facies melange that was metamorphosed sometime during the Jurassic and Cretaceous; and (3) low-pressure prehnite-pumpellyite- or greenschist- facies flysch and metavolcanic rocks that were initially metamorphosed during latest Cretaceous to early Tertiary time and, in the eastern Chugach Mountains, were subsequently overprinted by low-pressure amphibolite-facies metamorphism that accompanied widespread intrusion during Eocene time. A similar low-pressure-facies series also developed within melange and flysch of the Yakutat terrane; these rocks are also intruded by Eocene plutons and are correlated with similar rocks of the Chugach terrane.Seaward of the Chugach terrane are the strongly deformed but weakly metamorphosed (prehnite-pumpellyite-facies) deep-sea metasedimentary rocks and oceanic metavolcanic rocks of the Ghost Rocks and Prince William terranes. Metamorphism and deformation occurred during underthrusting of these terranes beneath the Chugach terrane in early Tertiary time and predated, perhaps by very little, intrusion by early Tertiary granitoids.

From the inside out: Eagle Rock School Producing a New Generation of CES Teachers

ERIC Educational Resources Information Center

Condon, Dan

2008-01-01

In this article, the author gives an overview of Eagle Rock School's Teaching Fellowship Program which he founded in collaboration with Public Allies, Inc. and under the auspices of Eagle Rock's Professional Development Center. Eagle Rock's Teaching Fellowship has two perspectives: (1) local; and (2) global. Locally, Fellows contribute skills,…

Petroleum geology and resources of the North Caspian Basin, Kazakhstan and Russia

USGS Publications Warehouse

Ulmishek, Gregory F.

2001-01-01

The North Caspian basin is a petroleum-rich but lightly explored basin located in Kazakhstan and Russia. It occupies the shallow northern portion of the Caspian Sea and a large plain to the north of the sea between the Volga and Ural Rivers and farther east to the Mugodzhary Highland, which is the southern continuation of the Ural foldbelt. The basin is bounded by the Paleozoic carbonate platform of the Volga-Ural province to the north and west and by the Ural, South Emba, and Karpinsky Hercynian foldbelts to the east and south. The basin was originated by pre-Late Devonian rifting and subsequent spreading that opened the oceanic crust, but the precise time of these tectonic events is not known. The sedimentary succession of the basin is more than 20 km thick in the central areas. The drilled Upper Devonian to Tertiary part of this succession includes a prominent thick Kungurian (uppermost Lower Permian) salt formation that separates strata into the subsalt and suprasalt sequences and played an important role in the formation of oil and gas fields. Shallow-shelf carbonate formations that contain various reefs and alternate with clastic wedges compose the subsalt sequence on the 1 basin margins. Basinward, these rocks grade into deep-water anoxic black shales and turbidites. The Kungurian salt formation is strongly deformed into domes and intervening depressions. The most active halokinesis occurred during Late Permian?Triassic time, but growth of salt domes continued later and some of them are exposed on the present-day surface. The suprasalt sequence is mostly composed of clastic rocks that are several kilometers thick in depressions between salt domes. A single total petroleum system is defined in the North Caspian basin. Discovered reserves are about 19.7 billion barrels of oil and natural gas liquids and 157 trillion cubic feet of gas. Much of the reserves are concentrated in the supergiant Tengiz, Karachaganak, and Astrakhan fields. A recent new oil discovery on the Kashagan structure offshore in the Caspian Sea is probably also of the supergiant status. Major oil and gas reserves are located in carbonate reservoirs in reefs and structural traps of the subsalt sequence. Substantially smaller reserves are located in numerous fields in the suprasalt sequence. These suprasalt fields are largely in shallow Jurassic and Cretaceous clastic reservoirs in salt dome-related traps. Petroleum source rocks are poorly identified by geochemical methods. However, geologic data indicate that the principal source rocks are Upper Devonian to Lower Permian deep-water black-shale facies stratigraphically correlative to shallow-shelf carbonate platforms on the basin margins. The main stage of hydrocarbon generation was probably in Late Permian and Triassic time, during deposition of thick orogenic clastics. Generated hydrocarbons migrated laterally into adjacent subsalt reservoirs and vertically, through depressions between Kungurian salt domes where the salt is thin or absent, into suprasalt clastic reservoirs. Six assessment units have been identified in the North Caspian basin. Four of them include Paleozoic subsalt rocks of the basin margins, and a fifth unit, which encompasses the entire total petroleum system area, includes the suprasalt sequence. All five of these assessment units are underexplored and have significant potential for new discoveries. Most undiscovered petroleum resources are expected in Paleozoic subsalt carbonate rocks. The assessment unit in subsalt rocks with the greatest undiscovered potential occupies the south basin margin. Petroleum potential of suprasalt rocks is lower; however, discoveries of many small to medium size fields are expected. The sixth identified assessment unit embraces subsalt rocks of the central basin areas. The top of subsalt rocks in these areas occurs at depths ranging from 7 to 10 kilometers and has not been reached by wells. Undiscovered resources of this unit did not rec

Carboniferous-Rotliegend total petroleum system; description and assessment results summary

USGS Publications Warehouse

Gautier, Donald L.

2003-01-01

The Anglo-Dutch Basin and the Northwest German Basin are two of the 76 priority basins assessed by the U.S. Geological Survey World Energy Project. The basins were assessed together because most of the resources occur within a single petroleum system (the Carboniferous-Rotliegend Total Petroleum System) that transcends the combined Anglo-Dutch Basin and Northwest German Basin boundary. The juxtaposition of thermally mature coals and carbonaceous shales of the Carboniferous Coal Measures (source rock), sandstones of the Rotliegend sedimentary systems (reservoir rock), and the Zechstein evaporites (seal) define the total petroleum system (TPS). Three assessment units were defined, based upon technological and geographic (rather than geological) criteria, that subdivide the Carboniferous-Rotliegend Total Petroleum System. These assessment units are (1) the Southern Permian Basin-Offshore Europe Assessment Unit, (2) the Southern Permian Basin Onshore Europe Assessment Unit, and (3) the Southern Permian Basin Onshore United Kingdom Assessment Unit. Although the Carboniferous-Rotliegend Total Petroleum System is one of the most intensely explored volumes of rock in the world, potential remains for undiscovered resources. Undiscovered conventional resources associated with the TPS range from 22 to 184 million barrels of oil, and from 3.6 to 14.9 trillion cubic feet of natural gas. Of these amounts, approximately 62 million barrels of oil and 13 trillion cubic feet of gas are expected in offshore areas, and 26 million barrels of oil and 1.9 trillion cubic feet of gas are predicted in onshore areas.

Development of Helium-Mass-Spectrometry-Permeameter for the Measurement of Permeability of Near-Impermeable Rock

NASA Astrophysics Data System (ADS)

Lee, Moo Y.; Bauer, Stephen J.

2016-12-01

A helium leakage detection system was modified to measure gas permeability on extracted cores of nearly impermeable rock. The Helium-Mass-Spectrometry-Permeameter (HMSP) is duplicating the classic Darcy's experiment with a constant pressure differential and steady-state flow through a sample using helium gas. Under triaxial stress condition, the newly developed HMSP can measure hydraulic permeability of rocks and geomaterials down to the nanoDarcy scale (10-21 m2). The extension of measuring the lower end of the permeability scale may help answer important questions regarding the permeability of rock at great depth where fractures may close completely under high lithostatic stress.

Self-Healing Characteristics of Damaged Rock Salt under Different Healing Conditions

PubMed Central

Chen, Jie; Ren, Song; Yang, Chunhe; Jiang, Deyi; Li, Lin

2013-01-01

Salt deposits are commonly regarded as ideal hosts for geologic energy reservoirs. Underground cavern construction-induced damage in salt is reduced by self-healing. Thus, studying the influencing factors on such healing processes is important. This research uses ultrasonic technology to monitor the longitudinal wave velocity variations of stress-damaged rock salts during self-recovery experiments under different recovery conditions. The influences of stress-induced initial damage, temperature, humidity, and oil on the self-recovery of damaged rock salts are analyzed. The wave velocity values of the damaged rock salts increase rapidly during the first 200 h of recovery, and the values gradually increase toward stabilization after 600 h. The recovery of damaged rock salts is subjected to higher initial damage stress. Water is important in damage recovery. The increase in temperature improves damage recovery when water is abundant, but hinders recovery when water evaporates. The presence of residual hydraulic oil blocks the inter-granular role of water and restrains the recovery under triaxial compression. The results indicate that rock salt damage recovery is related to the damage degree, pore pressure, temperature, humidity, and presence of oil due to the sealing integrity of the jacket material. PMID:28811444

Self-Healing Characteristics of Damaged Rock Salt under Different Healing Conditions.

PubMed

Chen, Jie; Ren, Song; Yang, Chunhe; Jiang, Deyi; Li, Lin

2013-08-12

Salt deposits are commonly regarded as ideal hosts for geologic energy reservoirs. Underground cavern construction-induced damage in salt is reduced by self-healing. Thus, studying the influencing factors on such healing processes is important. This research uses ultrasonic technology to monitor the longitudinal wave velocity variations of stress-damaged rock salts during self-recovery experiments under different recovery conditions. The influences of stress-induced initial damage, temperature, humidity, and oil on the self-recovery of damaged rock salts are analyzed. The wave velocity values of the damaged rock salts increase rapidly during the first 200 h of recovery, and the values gradually increase toward stabilization after 600 h. The recovery of damaged rock salts is subjected to higher initial damage stress. Water is important in damage recovery. The increase in temperature improves damage recovery when water is abundant, but hinders recovery when water evaporates. The presence of residual hydraulic oil blocks the inter-granular role of water and restrains the recovery under triaxial compression. The results indicate that rock salt damage recovery is related to the damage degree, pore pressure, temperature, humidity, and presence of oil due to the sealing integrity of the jacket material.

Full-Scale Linear Cutting Tests in Chongqing Sandstone to Study the Influence of Confining Stress on Rock Cutting Forces by TBM Disc Cutter

NASA Astrophysics Data System (ADS)

Pan, Yucong; Liu, Quansheng; Liu, Jianping; Peng, Xingxin; Kong, Xiaoxuan

2018-06-01

In order to study the influence of confining stress on rock cutting forces by tunnel boring machine (TBM) disc cutter, full-scale linear cutting tests are conducted in Chongqing Sandstone (uniaxial compressive strength 60.76 MPa) using five equal biaxial confining stressed conditions, i.e. 0-0, 5-5, 10-10, 15-15 and 20-20 MPa; disc cutter normal force, rolling force, cutting coefficient and normalized resultant force are analysed. It is found that confining stress can greatly affect disc cutter resultant force, its proportion in normal and rolling directions and its acting point for the hard Chongqing Sandstone and the confining stress range used in this study. For every confining stressed condition, as cutter penetration depth increases, disc cutter normal force increases with decreasing speed, rolling force and cutting coefficient both increase linearly, and acting point of the disc cutter resultant force moves downward at some extent firstly and then upward back to its initial position. For same cutter penetration depth, as confining stress increases, disc cutter normal force, rolling force, cutting coefficient and normalized resultant force all increase at some extent firstly and then decrease rapidly to very small values (quite smaller than those obtained under the non-stressed condition) after some certain confining stress thresholds. The influence of confining stress on rock cutting by TBM disc cutter can be generally divided into three stages as confining stress increases, i.e. strengthening effect stage, damaging effect stage and rupturing effect stage. In the former two stages (under low confining stress), rock remains intact and rock cutting forces are higher than those obtained under the non-stressed condition, and thus rock cutting by TBM disc cutter is restrained; in the last stage (under high confining stress), rock becomes non-intact and rock slabbing failure is induced by confining stress before disc cutting, and thus rock cutting by TBM disc cutter is facilitated. Meanwhile, some critical values of confining stress and cutter penetration depth are identified to represent the changes of rock cutting state. This study provides better understanding of the influence of confining stress on disc cutter performance and can guide to optimize the TBM operation under stressed condition.

Evidence of biological activity in Hawaiian subsurface basalts

NASA Astrophysics Data System (ADS)

Fisk, M. R.; Storrie-Lombardi, M. C.; Douglas, S.; Popa, R.; McDonald, G.; di Meo-Savoie, C.

2003-12-01

The Hawaii Scientific Drilling Program (HSDP) cored and recovered igneous rock from the surface to a depth of 3109 m near Hilo, Hawaii. Much of the deeper parts of the hole is composed of hyaloclastite (fractured basalt glass that has been cemented in situ with secondary minerals). Some hyaloclastite units have been altered in a manner attributed to microorganisms in volcanic rocks. Samples from one such unit (1336 m to 1404 m below sea level) were examined to test the hypothesis that the alteration was associated with microorganisms. Deep ultraviolet native fluorescence and resonance Raman spectroscopy indicate that nucleic acids and aromatic amino acids are present in clay inside spherical cavities (vesicles) within basalt glass. Chemical mapping shows that phosphorus and carbon were enriched at the boundary between the clay and volcanic glass of the vesicles. Environmental scanning electron microscopy (ESEM) reveals two to three micrometer coccoid structures in these same boundaries. ESEM-linked energy dispersive spectroscopy demonstrated carbon, phosphorous, chloride, and magnesium in these bodies significantly differing from unoccupied neighboring regions of basalt. These observations taken together indicate the presence of microorganisms at the boundary between primary volcanic glass and secondary clays. Amino acids and nucleic acids were extracted from bulk samples of the hyaloclastite unit. Amino acid abundance was low, and if the amino acids are derived from microorganisms in the rock, then there are less than 100,000 cells per gram of rock. Most nucleic acid sequences extracted from the unit were closely related to sequences of Crenarchaeota collected from the subsurface of the ocean floor.

Shahejie-Shahejie/Guantao/Wumishan and Carboniferous/Permian Coal-Paleozoic Total Petroleum Systems in the Bohaiwan Basin, China (based on geologic studies for the 2000 World Energy Assessment Project of the U.S. Geological Survey)

USGS Publications Warehouse

Ryder, Robert T.; Qiang, Jin; McCabe, Peter J.; Nuccio, Vito F.; Persits, Felix

2012-01-01

This report discusses the geologic framework and petroleum geology used to assess undiscovered petroleum resources in the Bohaiwan basin province for the 2000 World Energy Assessment Project of the U.S. Geological Survey. The Bohaiwan basin in northeastern China is the largest petroleum-producing region in China. Two total petroleum systems have been identified in the basin. The first, the Shahejie&ndashShahejie/Guantao/Wumishan Total Petroleum System, involves oil and gas generated from mature pods of lacustrine source rock that are associated with six major rift-controlled subbasins. Two assessment units are defined in this total petroleum system: (1) a Tertiary lacustrine assessment unit consisting of sandstone reservoirs interbedded with lacustrine shale source rocks, and (2) a pre-Tertiary buried hills assessment unit consisting of carbonate reservoirs that are overlain unconformably by Tertiary lacustrine shale source rocks. The second total petroleum system identified in the Bohaiwan basin is the Carboniferous/Permian Coal–Paleozoic Total Petroleum System, a hypothetical total petroleum system involving natural gas generated from multiple pods of thermally mature coal beds. Low-permeability Permian sandstones and possibly Carboniferous coal beds are the reservoir rocks. Most of the natural gas is inferred to be trapped in continuous accumulations near the center of the subbasins. This total petroleum system is largely unexplored and has good potential for undiscovered gas accumulations. One assessment unit, coal-sourced gas, is defined in this total petroleum system.

Estimation and mapping of uranium content of geological units in France.

PubMed

Ielsch, G; Cuney, M; Buscail, F; Rossi, F; Leon, A; Cushing, M E

2017-01-01

In France, natural radiation accounts for most of the population exposure to ionizing radiation. The Institute for Radiological Protection and Nuclear Safety (IRSN) carries out studies to evaluate the variability of natural radioactivity over the French territory. In this framework, the present study consisted in the evaluation of uranium concentrations in bedrocks. The objective was to provide estimate of uranium content of each geological unit defined in the geological map of France (1:1,000,000). The methodology was based on the interpretation of existing geochemical data (results of whole rock sample analysis) and the knowledge of petrology and lithology of the geological units, which allowed obtaining a first estimate of the uranium content of rocks. Then, this first estimate was improved thanks to some additional information. For example, some particular or regional sedimentary rocks which could present uranium contents higher than those generally observed for these lithologies, were identified. Moreover, databases on mining provided information on the location of uranium and coal/lignite mines and thus indicated the location of particular uranium-rich rocks. The geological units, defined from their boundaries extracted from the geological map of France (1:1,000,000), were finally classified into 5 categories based on their mean uranium content. The map obtained provided useful data for establishing the geogenic radon map of France, but also for mapping countrywide exposure to terrestrial radiation and for the evaluation of background levels of natural radioactivity used for impact assessment of anthropogenic activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Laboratory measurements of the effective-stress law of carbonate rocks under deformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warpinski, N.R.; Teufel, L.W.

The behavior of rocks under the combined effects of confining stress and pore pressure is an important issue for any in situ petroleum process. In order to simplify the difficulties in dealing with two independent parameters, it is customary to introduce an effective-stress law which relates a net, or effective, stress to some combination of confining stress and pore pressure. This report documents laboratory tests of mechanical properties of five carbonate rocks.

Preliminary Map of Potentially Karstic Carbonate Rocks in the Central and Southern Appalachian States

USGS Publications Warehouse

Weary, David J.

2008-01-01

Karst is a landscape produced by dissolution of rocks and the development of integrated subterranean drainages dominated by the flow of ground water in solutionally enlarged conduits. Karst landscapes typically include cave entrances, sinkholes, blind valleys, losing streams, springs, and large and small-scale solution features on bedrock surfaces. Water-bearing rocks beneath the surface containing solutionally enlarged pores, fractures, or conduits are referred to as karst aquifers. About 40 percent of all ground water extracted in the United States comes from karst aquifers (Karst Waters Institute). Karst means many things to many people. To most cavers and many speleologists, karst means areas containing caves. To engineers, home builders, local governments, and insurance companies, karst is exemplified by the occurrence of sinkholes and subsidence hazard. To hydrologists, well drillers, and environmental consultants, the focus on karst may be more limited to karst aquifers and springs. Precise figures are not available, but ground collapses in karst areas in the United States require hundreds of millions of dollars in repair and mitigation costs each year. Most karst in the United States is formed in either carbonate or evaporite rocks. This map depicts only areas of carbonate rock outcrop, the chief host for karst formation in the eastern United States. The U.S. Geological Survey (USGS), in cooperation with the National Cave and Karst Research Institute (NCKRI), the National Speleological Society (NSS), and various State geological surveys, is working on a new national karst map that will delineate areas of karst and karst-like features nationwide. This product attempts to identify potentially karstic areas of the Appalachian states as defined by the Appalachian Regional Commission (ARC), with the addition of the state of Delaware. This map is labeled preliminary because there is an expectation that it will be revised and updated as part of a new national karst map.

Diapiric origin of the Blytheville and Pascola arches in the Reelfoot rift, east-central United States: Relation to New Madrid seismicity

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKeown, F.A.; Diehl, S.F.; Glick, E.E.

1990-11-01

Most of the earthquakes in the New Madrid seismic zone correlate spatially with the Blytheville arch and part of the Pascoal arch, which are interpreted to be the same structure. Both arches may have formed by diapirism along the axis of the Reelfoot rift. Seismic, geophysical, and drill-hole data indicate that the rocks in the arches are highly deformed and fractured and have gross lithologic properties that make them weaker than rocks adjacent to the arches. The weaker rocks are inferred to fail seismically more readily than the stronger rocks adjacent to the arches.

Hydrogeology of the carbonate rocks of the Lebanon Valley, Pennsylvania

USGS Publications Warehouse

Meisler, Harold

1963-01-01

The Lebanon Valley, which is part of the Great Valley in southeastern Pennsylvania, is underlain by carbonate rocks in the southern part and by shale in the northern part. The carbonate rocks consist of alternating beds of limestone and dolomite of Cambrian and Ordovician age. Although the beds generally dip to the south, progressively younger beds crop out to the north, because the rocks are overturned. The stratigraphic units, from oldest to youngest, are: the Buffalo Springs Formation, Snitz Creek, Schaefferstown, Millbach, and Richland Formations of the Conococheague Group; the Stonehenge, Rickenbach, Epler, and Ontelaunee Formations of the Beekmantown Group; and the Annville, Myerstown, and Hershey Limestones.

Geologic map of the Wenatchee 1:100,000 Quadrangle, central Washington

USGS Publications Warehouse

Tabor, R.W.; Waitt, R.B.; Frizzell, V.A.; Swanson, D.A.; Byerly, G.R.; Bentley, R.D.

1982-01-01

The rocks and deposits within the Wenatchee quadrangle can be grouped into six generalized units: (1) Precambrian(?) Swakane Biotite Gneiss in the northeastern part of the quadrangle and the probable Jurassic low-grade metamorphic suite, mostly composed of the Easton Schist, in the southwestern part; (2) the Mesozoic Ingalls Tectonic Complex; (3) the Mesozoic Mount Stuart batholith; (4) lower and middle Tertiary nonmarine sedimentary and volcanic rocks; (5) Miocene basalt flows and interbedded epiclastic rocks constituting part of the Columbia River Basalt Group and interbedded silicic volcaniclastic rocks of the Ellensburg Formation; and (6) Pliocene to Holocene alluvium, glacial, flood, and mass-wastage deposits.

Lunar Samples - Apollo 12

NASA Image and Video Library

1969-11-28

S69-60354 (29 Nov. 1969) --- A scientist's gloved hand holds one of the numerous rock samples brought back to Earth from the Apollo 12 lunar landing mission. The rocks are under thorough examination in the Manned Spacecraft Center's (MSC) Lunar Receiving Laboratory (LRL). This sample is a highly shattered basaltic rock with a thin black-glass coating on five of its six sides. Glass fills fractures and cements the rock together. The rock appears to have been shattered and thrown out by a meteorite impact explosion and coated with molten rock material before the rock fell to the surface.

Recognizing subtle evidence for silicic magma derivation from petrochemically-similar arc crust: Isotopic and chemical evidence for the bimodal volcanic series of Gorely Volcanic Center, Kamchatka, Russia

NASA Astrophysics Data System (ADS)

Seligman, A. N.; Bindeman, I. N.; Ellis, B. S.; Ponomareva, V.; Leonov, V.

2012-12-01

The Kamchatka Peninsula is home to some of the most prolific subduction related volcanic activity in the world. Gorely caldera and its central volcano are located in the rear of its currently active Eastern Volcanic Front. Recent work determined the presence of explosive ignimbrite eruptions sourced from Gorely volcano during the Pleistocene. We studied 32 eruptive units, including tephrochronologically-dated Holocene tephra, stratigraphically-arranged ignimbrites, as well as pre- and post-caldera lavas. We analyzed oxygen isotope ratios of pyroxene and plagioclase grains by laser fluorination, and major and trace element compositions of whole rocks. In addition, we determined 87Sr/86Sr and 143Nd/144Nd ratios of caldera-forming ignimbrite eruptions. Chemical compositions show that Gorely eruptive units range from basalt to basaltic andesite in the "Pra-Gorely" stages prior to caldera formation and the modern Gorely stages forming its current edifice. In contrast, eruptive material from earlier ignimbrites exposed at Opasny Ravine consists primarily of dacite. Whole rock analyses for Gorely indicate that silicic rocks and ignimbrites volumetrically dominate all other products, forming separate bimodal peaks in our SiO2-frequency diagram. In addition, trace element concentrations and ratios define two trends, one for more silicic and another for more mafic material. δ18Omelt values range from a low of 4.85 up to 6.22‰, where the lowest value was found in the last caldera forming eruption, suggesting incorporation of hydrothermally-altered material from earlier eruptions. 87Sr/86Sr and 143Nd/144Nd ratios range from 0.70328 to 0.70351 and from 0.51303 to 0.51309 respectively, with higher and more diverse values being characteristic of earlier ignimbrite units; again suggesting incorporation of surrounding crustal material. In contrast to these results, MELTS modeling using a variety of likely primitive basalts from Gorely shows it is possible to obtain silicic chemical compositions near the evolved ignimbrite compositions, strictly through 70-80% fractional crystallization at 1-2 kbars and NNO oxygen fugacity. The combination of light δ18O values as well as elevated 87Sr/86Sr and low 143Nd/144Nd values, in addition to the volumetric excess of silicic rocks suggest assimilation of the older and petrochemically-similar country-rocks (Karymshina volcano and/or the underlying Akhomten Massif). This research can be utilized for studies of other volcanoes at "long-term centers", underscoring the importance of using both isotopes and modeling of fractional crystallization to determine silicic magma derivation through coupled shallow crustal assimilation of similar older material and fractional crystallization.

Geologic map of the Storm King Mountain quadrangle, Garfield County, Colorado

USGS Publications Warehouse

Bryant, Bruce; Shroba, Ralph R.; Harding, Anne E.; Murray, Kyle E.

2002-01-01

New 1:24,000-scale geologic mapping in the Storm King Mountain 7.5' quadrangle, in support of the USGS Western Colorado I-70 Corridor Cooperative Geologic Mapping Project, provides new data on the structure on the south margin of the White River uplift and the Grand Hogback and on the nature, history, and distribution of surficial geologic units. Rocks ranging from Holocene to Proterozoic in age are shown on the map. The Canyon Creek Conglomerate, a unit presently known to only occur in this quadrangle, is interpreted to have been deposited in a very steep sided local basin formed by dissolution of Pennsylvanian evaporite late in Tertiary time. At the top of the Late Cretaceous Williams Fork Formation is a unit of sandstone, siltstone, and claystone from which Late Cretaceous palynomorphs were obtained in one locality. This interval has been mapped previously as Ohio Creek Conglomerate, but it does not fit the current interpretation of the origin of the Ohio Creek. Rocks previously mapped as Frontier Sandstone and Mowry Shale are here mapped as the lower member of the Mancos Shale and contain beds equivalent to the Juana Lopez Member of the Mancos Shale in northwestern New Mexico. The Pennsylvanian Eagle Valley Formation in this quadrangle grades into Eagle Valley Evaporite as mapped by Kirkham and others (1997) in the Glenwood Springs area. The Storm King Mountain quadrangle spans the south margin of the White River uplift and crosses the Grand Hogback monocline into the Piceance basin. Nearly flat lying Mississippian through Cambrian sedimentary rocks capping the White River uplift are bent into gentle south dips and broken by faults at the edge of the uplift. South of these faults the beds dip moderately to steeply to the south and are locally overturned. These dips are interrupted by a structural terrace on which are superposed numerous gentle minor folds and faults. This terrace has an east-west extent similar to that of the Canyon Creek Conglomerate to the north. We interpret that the terrace formed by movement of Eagle Evaporite from below in response to dissolution and diapirism in the area underlain by the conglomerate. A low-angle normal fault dipping gently north near the north margin of the quadrangle may have formed also in response to diapirism and dissolution in the area of the Canyon Creek Conglomerate. Along the east edge of the quadrangle Miocene basalt flows are offset by faults along bedding planes in underlying south-dipping Cretaceous rocks, probably because of diapiric movement of evaporite into the Cattle Creek anticline (Kirkham and Widmann, 1997). Steep topography and weak rocks combine to produce a variety of geologic hazards in the quadrangle.

Experimental research on rock fracture failure characteristics under liquid nitrogen cooling conditions

NASA Astrophysics Data System (ADS)

Gao, Feng; Cai, Chengzheng; Yang, Yugui

2018-06-01

As liquid nitrogen is injected into a wellbore as fracturing fluid, it can rapidly absorb heat from warmer rock and generate cryogenic condition in downhole region. This will alter the physical conditions of reservoir rocks and further affect rock failure characteristics. To investigate rock fracture failure characteristics under liquid nitrogen cooling conditions, the fracture features of four types of sandstones and one type of marble were tested on original samples (the sample without any treatment) and cryogenic samples (the samples just taken out from the liquid nitrogen), respectively. The differences between original samples and cryogenic samples in load-displacement curves, fracture toughness, energy evolution and the crack density of ruptured samples were compared and analyzed. The results showed that at elastic deformation stage, cryogenic samples presented less plastic deformation and more obvious brittle failure characteristics than original ones. The average fracture toughness of cryogenic samples was 10.47%-158.33% greater than that of original ones, indicating that the mechanical strength of rocks used were enhanced under cooling conditions. When the samples ruptured, the cryogenic ones were required to absorb more energy and reserve more elastic energy. In general, the fracture degree of cryogenic samples was higher than that of original ones. As the samples were entirely fractured, the crack density of cryogenic samples was about 536.67% at most larger than that of original ones. This indicated that under liquid nitrogen cooling conditions, the stimulation reservoir volume is expected to be improved during fracturing. This work could provide a reference to the research on the mechanical properties and fracture failure of rock during liquid nitrogen fracturing.

Influence of rock salt impurities on limestone aggregate durability : final report.

DOT National Transportation Integrated Search

2016-08-01

Non-durable coarse aggregate in concrete pavement can break down under repeated freeze-thaw cycles. : Application of rock salt may increase the severity of exposure conditions because of trace compounds, such as calcium : sulfate, in rock salt. Concr...

6. SEAWARD VIEW OF BOAT LANDING CUT INTO ROCK, ALSO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. SEAWARD VIEW OF BOAT LANDING CUT INTO ROCK, ALSO SHOWING CEMENT POURED ATOP TUNNEL. - Mile Rock Tunnel, Under Forty-eighth Avenue from Cabrillo Street to San Francisco Bay at Point Lobos, San Francisco, San Francisco County, CA

Influence of rock salt impurities on limestone aggregate durability : technical summary.

DOT National Transportation Integrated Search

2016-08-01

Non-durable coarse aggregate in concrete pavement can break down under : repeated freeze-thaw cycles. Application of rock salt may increase the severity of : exposure conditions because of trace compounds, such as calcium sulfate, in rock : salt. Con...

36 CFR 13.1112 - May I collect rocks and minerals?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false May I collect rocks and minerals? 13.1112 Section 13.1112 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR NATIONAL PARK SYSTEM UNITS IN ALASKA Special Regulations-Glacier Bay National Park and...

36 CFR 13.1112 - May I collect rocks and minerals?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false May I collect rocks and minerals? 13.1112 Section 13.1112 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR NATIONAL PARK SYSTEM UNITS IN ALASKA Special Regulations-Glacier Bay National Park and...

Climb Hard, Train Harder: Supplemental Training Techniques for Improved Rock Climbing Performance

ERIC Educational Resources Information Center

Larew, Bradley; Haibach-Beach, Pamela

2017-01-01

Climbing is an increasingly popular recreational activity that has attracted interest from a wide variety of populations, likely because of the increasing availability and challenge of climbing. Many children and adolescents are introduced to rock climbing in adventure programming units in their schools. Through physical education, children are…