Aluminum recycling in the United States in 2000

USGS Publications Warehouse

Plunkert, Patricia A.

2006-01-01

As one of a series of reports on metals recycling, this report discusses the flow of aluminum from production through its uses with particular emphasis on the recycling of industrial scrap (new scrap) and used products (old scrap) in 2000. This materials flow study includes a description of aluminum supply and demand factors for the United States to illustrate the extent of aluminum recycling and to identify recycling trends. Understanding the system of materials flow from source to ultimate disposition can assist in improving the management of natural resources in a manner that is compatible with sound environmental practices. In 2000, the old scrap recycling efficiency for aluminum was estimated to be 42 percent. Almost 60 percent of the aluminum that was recycled in 2000 came from new scrap, and the recycling rate was estimated to be 36 percent. The principal source of old scrap was recycled aluminum beverage cans.

Dependence of viscosity of suspensions of ceramic nanopowders in ethyl alcohol on concentration and temperature

PubMed Central

2012-01-01

This work presents results of measurements of viscosity of suspensions including yttrium oxide (Y2O3), yttrium aluminum garnet (Y3Al5O12) and magnesium aluminum spinel (MgAl2O4) nanopowders in ethanol. Nanoparticles used in our research were either commercially available (Baikowski) or nanopowders newly developed in the Institute of Ceramics and Building Materials in Warsaw, Poland. The study was conducted in a wide range of shear rates (0.01 to 2,000 s−1) and temperature interval from -15°C to 20°C. A Haake Mars 2 rheometer from Thermo Fisher, Germany, was used in the Biophysics Laboratory at Rzeszów University of Technology. Most of the samples show a non-Newtonian behaviour. It was confirmed with a Rheo-NMR system from Bruker that 10% by weight of Y2O3 suspension is a non-Newtonian fluid. In this work, we also report an unexpected behaviour of the viscosity of some samples (Y2O3 and Y3Al5O12) due to sedimentation effect. PMID:22824064

Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods

NASA Astrophysics Data System (ADS)

Majidi, Omid; Jahazi, Mohammad; Bombardier, Nicolas; Samuel, Ehab

2017-10-01

The strain rate sensitivity index, m-value, is being applied as a common tool to evaluate the impact of the strain rate on the viscoplastic behaviour of materials. The m-value, as a constant number, has been frequently taken into consideration for modeling material behaviour in the numerical simulation of superplastic forming processes. However, the impact of the testing variables on the measured m-values has not been investigated comprehensively. In this study, the m-value for a superplastic grade of an aluminum alloy (i.e., AA5083) has been investigated. The conditions and the parameters that influence the strain rate sensitivity for the material are compared with three different testing methods, i.e., monotonic uniaxial tension test, strain rate jump test and stress relaxation test. All tests were conducted at elevated temperature (470°C) and at strain rates up to 0.1 s-1. The results show that the m-value is not constant and is highly dependent on the applied strain rate, strain level and testing method.

Characterization of impact behaviour of armour plate materials

NASA Astrophysics Data System (ADS)

Bassim, M. N.; Bolduc, M.; Nazimuddin, G.; Delorme, J.; Polyzois, I.

2012-08-01

Three armour plate materials, including two steels, namely HHA and Mars 300, and an aluminium alloy 5083, were studied under impact loading to determine their behaviour and the mechanisms of deformation that lead to failure. The experimental testing was carried out using either a direct impact compression Split Hopkinson Bar or a torsion Hopkinson Bar. The impact properties and stress-strain cures were obtained as a function of the impact momentum in compression and the angle of twist in torsion. It was found that at the high strain rates developed in the specimen during the tests, the deformation occurs by the formation of adiabatic shear bands (ASBs) which may lead to the formation of cracks within the bands and the ultimate failure of the specimens. It was also found that below a certain impact momentum, the deformation is more uniform and no ASBs are formed. Also, ASBs are more likely to form in the BCC metals such as the two steels while diffuse ASBs associated with plastic flow are exhibited in the 5083 aluminum alloy. Microstructural techniques ranging from optical microscopy to atomic force microscopy (AFM) were used to study the topography of the ASBs. Also, modelling of the formation was performed. The results provide a comprehensive understanding of the role of ASBs in the failure of these materials.

The electrical losses induced by silver paste in n-type silicon solar cells

NASA Astrophysics Data System (ADS)

Aoyama, Takayuki; Aoki, Mari; Sumita, Isao; Yoshino, Yasushi; Ohshita, Yoshio; Ogura, Atsushi

2017-10-01

Aluminum-added silver paste (Ag/Al paste) has been used for p+ emitter of n-type solar cells. The electrical losses due to shunting and recombination caused by the paste in the cells have been reported to originate from huge metallic spikes due to the aluminum. However, whether the aluminum actually induces the losses has not been clarified yet. In this study, the “floating contact method” is applied to aluminum-free silver (Al-free Ag) paste to investigate the effects of aluminum extraction from the Ag/Al paste and to understand how the aluminum principally induces the losses for the p+ emitter. Furthermore, the interfacial morphology between the Al-free Ag paste and p-type silicon is investigated. The Ag paste itself creates tiny crystallites for the p+ emitter, resulting in shunting and recombination. The result indicates that the aluminum addition to Ag paste is not the main reason for the electrical losses in the n-type solar cells.

Children's interpretive understanding, moral judgments, and emotion attributions: relations to social behaviour.

PubMed

Malti, Tina; Gasser, Luciano; Gutzwiller-Helfenfinger, Eveline

2010-06-01

The study investigated interpretive understanding, moral judgments, and emotion attributions in relation to social behaviour in a sample of 59 5-year-old, 123 7-year-old, and 130 9-year-old children. Interpretive understanding was assessed by two tasks measuring children's understanding of ambiguous situations. Moral judgments and emotion attributions were measured using two moral rule transgressions. Social behaviour was assessed using teachers' ratings of aggressive and prosocial behaviour. Aggressive behaviour was positively related to interpretive understanding and negatively related to moral reasoning. Prosocial behaviour was positively associated with attribution of fear. Moral judgments and emotion attributions were related, depending on age. Interpretive understanding was unrelated to moral judgments and emotion attributions. The findings are discussed in regard to the role of interpretive understanding and moral and affective knowledge in understanding children's social behaviour.

Isobaric tags for relative and absolute quantitation (iTRAQ)-based proteomic analysis of Cryptococcus humicola response to aluminum stress.

PubMed

Zhang, Jingjing; Zhang, Lei; Qiu, Jinkui; Nian, Hongjuan

2015-10-01

Cryptococcus humicola is a highly aluminum (Al) tolerant yeast strain isolated from a tea field. Here the relative changes of protein expression in C. humicola undergoing aluminum stress were analyzed to understand the genetic basis of aluminum tolerance. In this work, iTRAQ-based (isobaric tags for relative and absolute quantification) quantitative proteomic technology was used to detect statistically significant proteins associated with the response to aluminum stress. A total of 625 proteins were identified and were mainly involved in translation/ribosomal structure and biogenesis, posttranslational modification/protein turnover/chaperones, energy production and conversion, and amino acid transport and metabolism. Of these proteins, 59 exhibited differential expression during aluminum stress. Twenty-nine proteins up-regulated by aluminum were mainly involved in translation/ribosomal structure and biogenesis, posttranslational modification/protein turnover and chaperones, and lipid transport and metabolism. Thirty proteins down-regulated by aluminum were mainly associated with energy transport and metabolism, translation/ribosomal structure and biogenesis, posttranslational modification/protein turnover/chaperones, and lipid transport and metabolism. The potential functions of some proteins in aluminum tolerance are discussed. These functional changes may be beneficial for cells to protect themselves from aluminum toxic conditions. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Fatigue damage accumulation in various metal matrix composites

NASA Technical Reports Server (NTRS)

Johnson, W. S.

1987-01-01

The purpose of this paper is to review some of the latest understanding of the fatigue behavior of continuous fiber reinforced metal matrix composites. The emphasis is on the development of an understanding of different fatigue damage mechanisms and why and how they occur. The fatigue failure modes in continuous fiber reinforced metal matrix composites are controlled by the three constituents of the system: fiber, matrix, and fiber/matrix interface. The relative strains to fatigue failure of the fiber and matrix will determine the failure mode. Several examples of matrix, fiber, and self-similar damage growth dominated fatigue damage are given for several metal matrix composite systems. Composite analysis, failure modes, and damage modeling are discussed. Boron/aluminum, silicon-carbide/aluminum, FP/aluminum, and borsic/titanium metal matrix composites are discussed.

An investigation of plastic fracture in aluminum alloys

NASA Technical Reports Server (NTRS)

Low, J. R., Jr.; Vanstone, R. H.; Merchant, R. H.

1972-01-01

The brittle fracture of many high strength alloys such as steel, titanium, and aluminum was shown to occur by a process called plastic fracture. According to this process microscopic voids form at impurity particles, then grow and coalesce to cause the final rupture. To further understand the role of impurities, four aluminum alloys were investigated: 2024-T851, 2124-T851, 7075-T7351 and 7079-T651. Fractography, quantitative metallography, and microprobe studies assessed the roles of various impurity particles relative to these alloys.

Quantitative trait loci controlling aluminum tolerance in soybean: candidate gene and SNP marker discovery

USDA-ARS?s Scientific Manuscript database

Aluminum (Al) toxicity is an important abiotic stress that affects soybean production in acidic soils. Development of Al-tolerant cultivars is an efficient and environmentally friendly solution to the problem. Effective selection of Al-tolerant genotypes in applied breeding requires an understanding...

Plant adaptation to acid soils: the molecular basis for crop aluminum resistance

USDA-ARS?s Scientific Manuscript database

Aluminum (Al) toxicity on acid soils is a significant limitation to crop production worldwide, as approximately 50% of the world’s potentially arable soils are acidic. Because acid soils are such an important constraint to agriculture, understanding the mechanisms and genes conferring resistance to ...

Aluminum resistance transcription factor 1 (ART1) contributes to natural variation in rice aluminum resistance

USDA-ARS?s Scientific Manuscript database

Transcription factors (TFs) mediate stress resistance indirectly via physiological mechanisms driven by the array of genes they regulate. Therefore, when studying TF-mediated stress resistance, it is important to understand how TFs interact with different genetic backgrounds. Here, we fine-mapped th...

Environmental Screening of Electrode Materials for a Rechargeable Aluminum Battery with an AlCl₃/EMIMCl Electrolyte.

PubMed

Ellingsen, Linda Ager-Wick; Holland, Alex; Drillet, Jean-Francois; Peters, Willi; Eckert, Martin; Concepcion, Carlos; Ruiz, Oscar; Colin, Jean-François; Knipping, Etienne; Pan, Qiaoyan; Wills, Richard G A; Majeau-Bettez, Guillaume

2018-06-01

Recently, rechargeable aluminum batteries have received much attention due to their low cost, easy operation, and high safety. As the research into rechargeable aluminum batteries with a room-temperature ionic liquid electrolyte is relatively new, research efforts have focused on finding suitable electrode materials. An understanding of the environmental aspects of electrode materials is essential to make informed and conscious decisions in aluminum battery development. The purpose of this study was to evaluate and compare the relative environmental performance of electrode material candidates for rechargeable aluminum batteries with an AlCl₃/EMIMCl (1-ethyl-3-methylimidazolium chloride) room-temperature ionic liquid electrolyte. To this end, we used a lifecycle environmental screening framework to evaluate 12 candidate electrode materials. We found that all of the studied materials are associated with one or more drawbacks and therefore do not represent a "silver bullet" for the aluminum battery. Even so, some materials appeared more promising than others did. We also found that aluminum battery technology is likely to face some of the same environmental challenges as Li-ion technology but also offers an opportunity to avoid others. The insights provided here can aid aluminum battery development in an environmentally sustainable direction.

Augmentation of aluminum-induced oxidative stress in rat cerebrum by presence of pro-oxidant (graded doses of ethanol) exposure.

PubMed

Nayak, Prasunpriya; Sharma, Shiv Bhushan; Chowdary, Nadella Vijaya Subbaraya

2010-11-01

Both aluminum and ethanol are pro-oxidants and neurotoxic. Considering the possibilities of co-exposure and sharing mechanisms of producing neurotoxicity, the present study was planned to identify the level of aluminum-induced oxidative stress in altered pro-oxidant (ethanol exposure) status of cerebrum. Male rats were coexposed to aluminum and ethanol for 4 weeks. After the exposure period, cerebral levels of protein, reduced glutathione (GSH), lipid peroxidation (TBARS) were measured. Activities of catalase, superoxide dismutase (SOD), glutathione reductase (GR) and glutathione perioxidase (GPx) of cerebrum were estimated. In most of the cases significant correlations were observed between the alterations and graded ethanol doses, suggesting a dose-dependency in pushing the oxidant equilibrium toward pro-oxidants. Aluminum is found to influence significantly all the studied parameters of oxidative stress. Likewise, ethanol also influenced these parameters significantly, except GR, while the interaction between ethanol and aluminum could significantly influence only the GSH content and GR activity of cerebrum. Present study demonstrate that coexposure of aluminum with pro-oxidant might favor development of aluminum-induced oxidative stress in cerebrum. This observation might be helpful in understanding of mechanism of neurodegenerative disorders and ameliorate them.

Fractographic and three body abrasion behaviour of Al-Garnet-C hybrid chill cast composites

NASA Astrophysics Data System (ADS)

Bandekar, Nityanand; Prasad, M. G. Anantha

2017-08-01

Fractographic and tribological behaviour of hybrid composite of aluminum alloy LM13 matrix with garnet and carbon was investigated. Conventional stir casting technique was used to fabricate the composites with chill cast technique. Various chill materials like Copper, Steel, Iron and Silicon carbide were used to improve the directional solidification. The garnet being added ranges from 3 to 12 wt-% in steps of 3wt-% and constant 3wt-% of carbon. The experiment evaluates the mechanical, fractographic and three body abrasion behaviour of the hybrid composites for various parameters of load, garnet and chills. Microstructural characterization of the composite samples revealed a uniform distribution of reinforcements with minimum clustering. SEM was used for examine worn surfaces. The addition of garnet and carbon reinforcement decreases the wear rate of hybrid composites. Fracture behaviour showed the changes from ductile mode to brittle mode of failure. Further, directional chilling with copper chill improves the wear resistance of the composites.

First-principles investigation of aluminum intercalation and diffusion in TiO2 materials: Anatase versus rutile

NASA Astrophysics Data System (ADS)

Tang, Weiqiang; Xuan, Jin; Wang, Huizhi; Zhao, Shuangliang; Liu, Honglai

2018-04-01

Aluminum-ion batteries, emerging as a promising post-lithium battery solution, have been a subject of increasing research interest. Yet, most existing aluminum-ion research has focused on electrode materials development and synthesis. There has been a lack of fundamental understanding of the electrode processes and thus theoretical guidelines for electrode materials selection and design. In this study, by using density functional theory, we for the first time report a first-principles investigation on the thermodynamic and kinetic properties of aluminum intercalation into two common TiO2 polymorphs, i.e., anatase and rutile. After examining the aluminum intercalation sites, intercalation voltages, storage capacities and aluminum diffusion paths in both cases, we demonstrate that the stable aluminum intercalation site locates at the center of the O6 octahedral for TiO2 rutile and off center for TiO2 anatase. The maximum achievable Al/Ti ratios for rutile and anatase are 0.34375 and 0.36111, respectively. Although rutile is found to have an aluminum storage capacity slightly higher than anatase, the theoretical specific energy of rutile can reach 20.90 Wh kg-1, nearly twice as high as anatase (9.84 Wh kg-1). Moreover, the diffusion coefficient of aluminum ions in rutile is 10-9 cm2 s-1, significantly higher than that in anatase (10-20 cm2 s-1). In this regard, TiO2 rutile appears to be a better candidate than anatase as an electrode material for aluminum-ion batteries.

Analysis of Time Dependent Electric Field Degradation in AlGaN/GaN HEMTs (POSTPRINT)

DTIC Science & Technology

2014-10-01

identifying and understanding the failure mechanisms that limit the safe operating area of GaN HEMTs. 15. SUBJECT TERMS aluminum gallium nitride... gallium nitride, HEMTs, semiconductor device reliability, transistors 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT SAR 18. NUMBER...area of GaN HEMTs. Index Terms— Aluminum gallium nitride, gallium nitride, HEMTs, semiconductor device reliability, transistors. I. INTRODUCTION A

The effects of ingested aqueous aluminum on floral fidelity and foraging strategy in honey bees (Apis mellifera).

PubMed

Chicas-Mosier, Ana M; Cooper, Bree A; Melendez, Alexander M; Pérez, Melina; Oskay, Devrim; Abramson, Charles I

2017-09-01

Pollinator decline is of international concern because of the economic services these organisms provide. Commonly cited sources of decline are toxicants, habitat fragmentation, and parasites. Toxicant exposure can occur through uptake and distribution from plant tissues and resources such as pollen and nectar. Metals such as aluminum can be distributed to pollinators and other herbivores through this route especially in acidified or mined areas. A free-flying artificial flower patch apparatus was used to understand how two concentrations of aluminum (2mg/L and 20mg/L) may affect the learning, orientation, and foraging behaviors of honey bees (Apis mellifera) in Turkey. The results show that a single dose of aluminum immediately affects the floral decision making of honey bees potentially by altering sucrose perception, increasing activity level, or reducing the likelihood of foraging on safer or uncontaminated resource patches. We conclude that aluminum exposure may be detrimental to foraging behaviors and potentially to other ecologically relevant behaviors. Copyright © 2017. Published by Elsevier Inc.

Effect of oxide layer formation on deformation of aluminum alloys under fire conditions

DOE PAGES

Yilmaz, Nadir; Vigil, Francisco M.; Tolendino, Greg; ...

2015-05-14

The purpose of this study is to investigate the structural behavior of aluminum alloys used in the aerospace industry when exposed to conditions similar to those of an accident scenario, such as a fuel fire. This study focuses on the role that the aluminum oxide layer plays in the deformation and the strength of the alloy above melting temperature. To replicate some of the thermal and atmospheric conditions that the alloys might experience in an accident scenario, aluminum rod specimens were subjected to temperatures near to or above their melting temperature in air, nitrogen, and vacuum environments. The characteristics ofmore » their deformation, such as geometry and rate of deformation, were observed. Tests were conducted by suspending aluminum rods vertically from an enclosure. This type of experiment was performed in two different environments: air and nitrogen. The change in environments allowed the effects of the oxide layer on the material strength to be analyzed by inhibiting the growth of the oxide layer. Observations were reported from imaging taken during the experiment showing creep behavior of aluminum alloys at elevated temperatures and time to failure. In addition, an example of tensile load–displacement data obtained in air and vacuum was reported to understand the effect of oxide layer on aluminum deformation and strength.« less

Driving Ability of HMX based Aluminized Explosive Affected by the Reaction Degree of Aluminum Powder

NASA Astrophysics Data System (ADS)

Duan, Yingliang

2017-06-01

Due to the time scale of aluminum reaction, the detonation process of the aluminized explosive becomes very complex, and there is less agreement on the reaction mechanism of aluminum powder. If the reaction of aluminum occurs in the reaction zone, the energy released will further strengthen the work ability of detonation wave. So it is very important for characterizing the detonation parameters and detonation driving ability to accurately understand the role of aluminum powder in the reaction zone. In this paper, detonation driving process of HMX based aluminized explosive was studied by cylinder test, obtaining the expansion track of cylinder wall. In order to further research the reaction degree (λ) of aluminum in the reaction zone, the thermodynamic program VHL was used to calculate the detonation process at different reaction degrees, obtaining the parameters of detonation products thermodynamic state. Using the dynamic software LS-DYNA and the JWL equation of state by fitting the pressure and relative volume relationship, the cylinder test was simulated. Compared with the experimental results, when the reaction degree is 20%, the driving ability is found to be in agreement with measured ones. It is concluded that the driving ability of HMX based aluminized explosive can be more accurately characterized by considering the reaction degree of aluminum powder in the reaction zone.

The Strength of the Metal. Aluminum Oxide Interface

NASA Technical Reports Server (NTRS)

Pepper, S. V.

1984-01-01

The strength of the interface between metals and aluminum oxide is an important factor in the successful operation of devices found throughout modern technology. One finds the interface in machine tools, jet engines, and microelectronic integrated circuits. The strength of the interface, however, should be strong or weak depending on the application. The diverse technological demands have led to some general ideas concerning the origin of the interfacial strength, and have stimulated fundamental research on the problem. Present status of our understanding of the source of the strength of the metal - aluminum oxide interface in terms of interatomic bonds are reviewed. Some future directions for research are suggested.

Experimental study on nonlinear vibrating of aluminum foam using electronic speckle pattern interferometry

NASA Astrophysics Data System (ADS)

Yang, Fujun; Ma, Yinhang; Tao, Nan; He, Xiaoyuan

2017-06-01

Due to its multi properties, including excellent stiffness-to-weight and strength-to-weight ratios, closed-cell aluminum and its alloy foams become candidate materials for use in many high-technology industries, such as the automotive and aerospace industries. For the efficient use of closed-cell foams in structural applications, it is necessary and important to detailly understand their mechanical characteristics. In this paper, the nonlinear vibration responses of the cantilever beams of closed-cell aluminum foams were investigated by use of electronic speckle pattern interferometry (ESPI). The nonlinear resonant mode shapes of testing specimens under harmonic excitation were measured. It is first time to obtain from the experimental results that there exist super-harmonic responses when the cantilever beams of closed-cell aluminum foam were forced to vibrate, which was caused by its specific cellular structures.

Cause and Prevention of Explosions Involving DC Casting of Aluminum Sheet Ingot

NASA Astrophysics Data System (ADS)

Richter, Ray T.; Ekenes, J. Martin

The casting of aluminum alloy sheet ingot and T-bar presents the potential for some of the most volatile situations that can occur in DC (direct chill) and EMC (Electromagnetic) casting processes. Aluminum Association explosion incident data from over 300 explosions spanning a twenty-year period were reviewed and analyzed looking for common factors and repetitive reasons for explosions. Analysis of explosions occurring during the three stages of sheet ingot casting, `start of cast', `steady state' and `end of cast', were examined and prioritized. Case studies illustrate the need for understanding both technical and non-technical factors contributing to explosions involving molten metal. This paper identifies the major causes of explosions involving DC casting of aluminum alloy sheet ingot and makes recommendations for how to prevent the recurrence of such events and minimize the risk of injury.

Controlled Emissivity Coatings to Delay Ignition of Polyethylene.

PubMed

Sonnier, Rodolphe; Ferry, Laurent; Gallard, Benjamin; Boudenne, Abderrahim; Lavaud, François

2015-10-12

Semi-opaque to opaque films containing small amounts of various aluminium particles to decrease emissivity were easily prepared and coated onto low-density polyethylene (LDPE) sheets. The thermal-radiative properties (reflectivity, transmissivity and absorptivity) of the films were measured and related to the aluminum particles' content, size and nature. Time-to-ignition of samples was assessed using a cone calorimeter at different heat flux values (35, 50 and 75 kW/m²). The coatings allowed significant ignition delay and, in some cases, changed the material behaviour from thermally thin to thick behaviour. These effects are related both to their emissivity and transmissivity. A lower emissivity, which decreases during the degradation, and a lower transmissivity are the key points to ensure an optimal reaction-to-fire.

Dietary protein restriction causes modification in aluminum-induced alteration in glutamate and GABA system of rat brain

PubMed Central

Nayak, Prasunpriya; Chatterjee, Ajay K

2003-01-01

Background Alteration of glutamate and γ-aminobutyrate system have been reported to be associated with neurodegenerative disorders and have been postulated to be involved in aluminum-induced neurotoxicity as well. Aluminum, an well known and commonly exposed neurotoxin, was found to alter glutamate and γ-aminobutyrate levels as well as activities of associated enzymes with regional specificity. Protein malnutrition also reported to alter glutamate level and some of its metabolic enzymes. Thus the region-wise study of levels of brain glutamate and γ-aminobutyrate system in protein adequacy and inadequacy may be worthwhile to understand the mechanism of aluminum-induced neurotoxicity. Results Protein restriction does not have any significant impact on regional aluminum and γ-aminobutyrate contents of rat brain. Significant interaction of dietary protein restriction and aluminum intoxication to alter regional brain glutamate level was observed in the tested brain regions except cerebellum. Alteration in glutamate α-decarboxylase and γ-aminobutyrate transaminase activities were found to be significantly influenced by interaction of aluminum intoxication and dietary protein restriction in all the tested brain regions. In case of regional brain succinic semialdehyde content, this interaction was significant only in cerebrum and thalamic area. Conclusion The alterations of regional brain glutamate and γ-aminobutyrate levels by aluminum are region specific as well as dependent on dietary protein intake. The impact of aluminum exposure on the metabolism of these amino acid neurotransmitters are also influenced by dietary protein level. Thus, modification of dietary protein level or manipulation of the brain amino acid homeostasis by any other means may be an useful tool to find out a path to restrict amino acid neurotransmitter alterations in aluminum-associated neurodisorders. PMID:12657166

Evolutionary accounts of human behavioural diversity

PubMed Central

Brown, Gillian R.; Dickins, Thomas E.; Sear, Rebecca; Laland, Kevin N.

2011-01-01

Human beings persist in an extraordinary range of ecological settings, in the process exhibiting enormous behavioural diversity, both within and between populations. People vary in their social, mating and parental behaviour and have diverse and elaborate beliefs, traditions, norms and institutions. The aim of this theme issue is to ask whether, and how, evolutionary theory can help us to understand this diversity. In this introductory article, we provide a background to the debate surrounding how best to understand behavioural diversity using evolutionary models of human behaviour. In particular, we examine how diversity has been viewed by the main subdisciplines within the human evolutionary behavioural sciences, focusing in particular on the human behavioural ecology, evolutionary psychology and cultural evolution approaches. In addition to differences in focus and methodology, these subdisciplines have traditionally varied in the emphasis placed on human universals, ecological factors and socially learned behaviour, and on how they have addressed the issue of genetic variation. We reaffirm that evolutionary theory provides an essential framework for understanding behavioural diversity within and between human populations, but argue that greater integration between the subfields is critical to developing a satisfactory understanding of diversity. PMID:21199836

Optimal inference with suboptimal models: Addiction and active Bayesian inference

PubMed Central

Schwartenbeck, Philipp; FitzGerald, Thomas H.B.; Mathys, Christoph; Dolan, Ray; Wurst, Friedrich; Kronbichler, Martin; Friston, Karl

2015-01-01

When casting behaviour as active (Bayesian) inference, optimal inference is defined with respect to an agent’s beliefs – based on its generative model of the world. This contrasts with normative accounts of choice behaviour, in which optimal actions are considered in relation to the true structure of the environment – as opposed to the agent’s beliefs about worldly states (or the task). This distinction shifts an understanding of suboptimal or pathological behaviour away from aberrant inference as such, to understanding the prior beliefs of a subject that cause them to behave less ‘optimally’ than our prior beliefs suggest they should behave. Put simply, suboptimal or pathological behaviour does not speak against understanding behaviour in terms of (Bayes optimal) inference, but rather calls for a more refined understanding of the subject’s generative model upon which their (optimal) Bayesian inference is based. Here, we discuss this fundamental distinction and its implications for understanding optimality, bounded rationality and pathological (choice) behaviour. We illustrate our argument using addictive choice behaviour in a recently described ‘limited offer’ task. Our simulations of pathological choices and addictive behaviour also generate some clear hypotheses, which we hope to pursue in ongoing empirical work. PMID:25561321

Bifilm Defect Formation in Hydraulic Jump of Liquid Aluminum

NASA Astrophysics Data System (ADS)

Hsu, Fu-Yuan

2016-06-01

In aluminum gravity casting, as liquid aluminum fell through a vertical sprue and impacted on the horizontal flat surface, a phenomenon known as hydraulic jump ( i.e., flow transition from super-critical to sub-critical flows) was observed. As the jump was transformed, a reverse eddy motion on the surface of the jump was created. This motion entrained aluminum oxide film from the surface into aluminum melt. This folded film (so-called "bifilm" defect) was engulfed by the melt and caused its quality to deteriorate. To understand this phenomenon, aluminum casting experiments and computational modeling were conducted. In the casting experiment, a radius ( R j) to the point where the circular hydraulic jump occurred was measured. This is the circular region of `irregular surface feature', a rough oxidized surface texture near the center area of the castings. To quantify contents of the bifilm defects in the outer region of the jump, the samples in this region were sectioned and re-melted for doing re-melted reduced pressure test (re-melt RPT). An "area-normalized" bifilm index map was plotted to analyze bifilms' population in the samples. The flow transition in the hydraulic jump of liquid aluminum depended on three pressure heads: inertial, gravitational, and surface-tension pressures. A new theoretical equation containing surface tension for describing the flow transition of liquid metal was proposed.

Network Analysis: A Novel Approach to Understand Suicidal Behaviour

PubMed Central

de Beurs, Derek

2017-01-01

Although suicide is a major public health issue worldwide, we understand little of the onset and development of suicidal behaviour. Suicidal behaviour is argued to be the end result of the complex interaction between psychological, social and biological factors. Epidemiological studies resulted in a range of risk factors for suicidal behaviour, but we do not yet understand how their interaction increases the risk for suicidal behaviour. A new approach called network analysis can help us better understand this process as it allows us to visualize and quantify the complex association between many different symptoms or risk factors. A network analysis of data containing information on suicidal patients can help us understand how risk factors interact and how their interaction is related to suicidal thoughts and behaviour. A network perspective has been successfully applied to the field of depression and psychosis, but not yet to the field of suicidology. In this theoretical article, I will introduce the concept of network analysis to the field of suicide prevention, and offer directions for future applications and studies.

Microstructures and properties of rapidly solidified alloys

NASA Technical Reports Server (NTRS)

Shechtman, D.; Horowitz, E.

1984-01-01

The microstructure and properties of rapidly solidified aluminum alloys were researched. The effects of powder and flake chemistry and morphology and alternative consolidation processing parameters are being conducted. Samples of the powders being utilized were obtained for comprehensive metallurgical characterization. Seven aluminum alloys in the form of thin foils were studied by a variety of techniques including optical metallography, scanning electron microscope, and transmission electron microscope. Details of the microstructural characteristics are presented along with a discussion of the solidification process. A better understanding of the microstructure of the rapidly solidified aluminum alloys prepared by a variety of techniques such as roller quenching, the vacuum atomized procedure, ultrasonically atomized in inert atmospheres, and atomized in flue gas was provided.

Thermodynamics of Titanium-Aluminum-Oxygen Alloys Studied

NASA Technical Reports Server (NTRS)

Copland, Evan H.; Jacobson, Nathan S.

2001-01-01

Titanium-aluminum alloys are promising intermediate-temperature alloys for possible compressor applications in gas-turbine engines. These materials are based on the a2-Ti3Al + g-TiAl phases. The major issue with these materials is high oxygen solubility in a2-Ti3Al, and oxidation of unsaturated alloys generally leads to mixed non-protective TiO2+Al2O3 scales. From phase diagram studies, oxygen saturated a2-Ti3Al(O) is in equilibrium with Al2O3; however, oxygen dissolution has a detrimental effect on mechanical properties and cannot be accepted. To better understand the effect of oxygen dissolution, we examined the thermodynamics of titanium-aluminum-oxygen alloys.

Aluminum Cluster-Based Materials for Propulsion and Other Applications

DTIC Science & Technology

2012-04-04

CuMg8- and AuMg8- . It was shown that aromaticity, traditionally used to understand stability of organic systems , can also stabilize metallic...of arsenic and K atoms. Extensions of these to other systems is currently under study. Since 2009, 12 group publications (GP) have resulted with...CuAl22- using DFT. 9 B. Stable Aromatic Aluminum-Based Metal Clusters: Aromaticity has historically been applied to organic systems that are

Immoral behaviour following brain damage: A review.

PubMed

Roberts, Stefanie; Henry, Julie D; Molenberghs, Pascal

2018-04-16

Despite the apparent sociability of human kind, immoral behaviour is ever present in society. The term 'immoral behaviour' represents a complex array of conduct, ranging from insensitivity to topics of conversation through to violent assault and murder. To better understand the neuroscience of immoral behaviour, this review investigates two clinical populations that commonly present with changes in moral behaviour - behavioural-variant frontotemporal dementia and acquired brain injuries. Based on evidence from these groups, it is argued that rather than a single underlying cause, immoral behaviour can result from three distinct types of cognitive failure: (1) problems understanding others; (2) difficulties controlling behaviour; or (3) deficits in the capacity to make appropriate emotional contributions. Each of these failures is associated with damage to different brain regions. A more nuanced approach to the neuroscience of immoral behaviour has important implications for our understanding of immoral behaviour in a wide range of clinical groups, as well as human society more broadly. © 2018 The British Psychological Society.

Thermomechanical properties and fracture of resin-bonded-sand cores - Experimental study and application in aluminium foundry

NASA Astrophysics Data System (ADS)

Menet, Claire; Reynaud, Pascal; Fantozzi, Gilbert; Thibault, Delphine; Laforêt, Adrien

2017-06-01

Sand cores are used to produce internal cavities of metallic cast parts with complex shapes like automotive cylinder heads. Foundry cores are granular materials made of sand grains aggregated with binder bridges. In the cold box coring process, the binder is a polyurethane resin. It is noteworthy that during the casting of the liquid metal, the polymer binder is seriously damaged. This kind of materials has been poorly investigated so far. This study aims for a better understanding of the mechanical behaviour and fracture of cores subjected to various loads and thermal ageing. Particularly, the focus is on the decoring step, which consists in removing the sand by hammering and vibration of the metallic part after casting. This major project, generated from the collaboration of the aluminum casting company Montupet, and two laboratories Centre des Matériaux (CdM) and MATEIS, includes both experimental and numerical activities in order to model the decoring step of cylinder heads based on empiric data. Here, the experimental part of the work is presented.

Perforation of Thin Aluminum Alloy Plates by Blunt Projectiles - Experimental and Numerical Investigation

NASA Astrophysics Data System (ADS)

Wei, Gang; Zhang, Wei; Xiao, Xinke; Guo, Zitao

2011-06-01

Reducing the armor weight has become a research focus in terms of armored material with the increasing requirement of the mobility and flexibility of tanks and armored vehicles in modern local wars. Due to high strength-to-density ratio, aluminum alloy has become a potential light armored material. In this study, both lab-scale ballistic test and finite element simulation were adopted to examine the ballistic resistance of aluminum alloy targets. Blunt high strength steel projectiles with 12.7 mm diameter were launched by light gas gun against 3.3 mm thick aluminum alloy plates at velocity of 90 ~170 m/s. The ballistic limit velocity was obtained. Plugging failure and obvious structure deformation of targets were observed, and with the impact velocity increasing, the target structure deformation decrease gradually. Corresponding 2D finite element simulations were conducted by ABAQUS/EXPLICIT combined with material performance testing. Good agreement between the numerical simulations and the experimental results was found. Detailed computational results were provided to understand the deformation and failure mechanisms of the aluminum alloy plates.

Using Temporal Self-Regulation Theory to understand healthy and unhealthy eating intentions and behaviour.

PubMed

Evans, Rachel; Norman, Paul; Webb, Thomas L

2017-09-01

The present research investigated whether Temporal Self-Regulation Theory (TST) can be used to help understand healthy and unhealthy eating intentions and behaviour. A prospective design with two waves of data collection one week apart. An online survey measured the key components of TST (i.e., connectedness, timing and valence beliefs, intentions, past behaviour, habit strength, perceived environmental cues, and self-control) with respect to eating fruit and vegetables (F&V; N = 133) or unhealthy snacks (N = 125). Eating behaviour was assessed one week later. The components of TST explained significant amounts of the variance in intentions and behaviour for intake of F&Vs (22% and 64%, respectively) and unhealthy snacks (18% and 35%, respectively). Beliefs about positive and negative short-term outcomes significantly predicted intentions to perform both behaviours. Intentions and past behaviour significantly predicted consumption of F&Vs, and past behaviour moderated the relationship between intention and behaviour which became stronger as past behaviour increased. Past behaviour and habit strength significantly predicted unhealthy snacking. The findings suggest that TST may be a useful framework for understanding eating intentions and behaviour. However, research did not find support for all of the hypothesised relationships (e.g., self-regulatory capacity did not significantly predict eating behaviour and also failed to moderate the relationships between intentions and behaviour). Research using alternative measures of self-regulatory capacity, along with experimental manipulations of TST variables, may be needed to further understand eating intentions and behaviour. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Effect of temperature on the adsorption of sulfanilamide onto aluminum oxide and its molecular dynamics simulations

NASA Astrophysics Data System (ADS)

Ji, Ying-xue; Wang, Feng-he; Duan, Lun-chao; Zhang, Fan; Gong, Xue-dong

2013-11-01

The effect of temperature on the adsorption of sulfanilamide (SA) onto aluminum oxide was researched through batch adsorption experiments, and was then simulated using the molecular dynamics (MD) method. The results show that SA can be adsorbed effectively by the adsorbent of aluminum oxide due to their interactions between SA molecule and the surface of aluminum oxide crystal, and temperature is a key factor which influences the adsorption efficiency obviously. The removal ratio of SA at 298 K is the highest among the selected temperatures (293 K, 298 K, 303 K). MD simulations revealed the interactions between SA molecules and (0 1 2) surface of aluminum oxide crystal at molecular level. The SA molecule has clung to the (0 1 2) face of aluminum oxide crystal, and its structure is deformed during its combining process with the surface. Both binding energies (Eb) and deformation energies (ΔEdeform) in the SA-aluminum oxide system follow the same order as: SA-Al2O3 (298 K) > SA-Al2O3 (293 K) > SA-Al2O3 (303 K). Their deformation energies are far less than their non-bonding energies. Analysis of radial distribution functions (RDFs) indicates that SA can be adsorbed effectively by aluminum oxide crystal mainly through non-bond interactions. The simulation results agree well with the experimental results, which verify the rationality and reliability of the MD simulation. The further MD simulations provide theoretically optimal temperature (301 K) for the adsorption of SA onto aluminum oxide. The molecular dynamics simulation will be useful for better understanding the adsorption mechanism of antibiotics onto metal oxides, which will also be helpful for optimizing experimental conditions to improve the adsorptive removal efficiency of antibiotics.

Water and oil wettability of anodized 6016 aluminum alloy surface

NASA Astrophysics Data System (ADS)

Rodrigues, S. P.; Alves, C. F. Almeida; Cavaleiro, A.; Carvalho, S.

2017-11-01

This paper reports on the control of wettability behaviour of a 6000 series aluminum (Al) alloy surface (Al6016-T4), which is widely used in the automotive and aerospace industries. In order to induce the surface micro-nanostructuring of the surface, a combination of prior mechanical polishing steps followed by anodization process with different conditions was used. The surface polishing with sandpaper grit size 1000 promoted aligned grooves on the surface leading to static water contact angle (WCA) of 91° and oil (α-bromonaphthalene) contact angle (OCA) of 32°, indicating a slightly hydrophobic and oleophilic character. H2SO4 and H3PO4 acid electrolytes were used to grow aluminum oxide layers (Al2O3) by anodization, working at 15 V/18° C and 100 V/0 °C, respectively, in one or two-steps configuration. Overall, the anodization results showed that the structured Al surfaces were hydrophilic and oleophilic-like with both WCA and OCA below 90°. The one-step configuration led to a dimple-shaped Al alloy surface with small diameter of around 31 nm, in case of H2SO4, and with larger diameters of around 223 nm in case of H3PO4. The larger dimples achieved with H3PO4 electrolyte allowed to reach a slight hydrophobic surface. The thicker porous Al oxide layers, produced by anodization in two-step configuration, revealed that the liquids can penetrate easily inside the non-ordered porous structures and, thus, the surface wettability tended to superhydrophilic and superoleophilic character (CA < 10°). These results indicate that the capillary-pressure balance model, described for wettability mechanisms of porous structures, was broken. Moreover, thicker oxide layers with narrow pores of about 29 nm diameter allowed to achieve WCA < OCA. This inversion in favour of the hydrophilic-oleophobic surface behaviour is of great interest either for lubrication of mechanical components or in water-oil separation process.

Imitation as behaviour parsing.

PubMed Central

Byrne, R W

2003-01-01

Non-human great apes appear to be able to acquire elaborate skills partly by imitation, raising the possibility of the transfer of skill by imitation in animals that have only rudimentary mentalizing capacities: in contrast to the frequent assumption that imitation depends on prior understanding of others' intentions. Attempts to understand the apes' behaviour have led to the development of a purely mechanistic model of imitation, the 'behaviour parsing' model, in which the statistical regularities that are inevitable in planned behaviour are used to decipher the organization of another agent's behaviour, and thence to imitate parts of it. Behaviour can thereby be understood statistically in terms of its correlations (circumstances of use, effects on the environment) without understanding of intentions or the everyday physics of cause-and-effect. Thus, imitation of complex, novel behaviour may not require mentalizing, but conversely behaviour parsing may be a necessary preliminary to attributing intention and cause. PMID:12689378

Network information analysis reveals risk perception transmission in a behaviour-influenza dynamics system.

PubMed

Liao, C-M; You, S-H; Cheng, Y-H

2015-01-01

Influenza poses a significant public health burden worldwide. Understanding how and to what extent people would change their behaviour in response to influenza outbreaks is critical for formulating public health policies. We incorporated the information-theoretic framework into a behaviour-influenza (BI) transmission dynamics system in order to understand the effects of individual behavioural change on influenza epidemics. We showed that information transmission of risk perception played a crucial role in the spread of health-seeking behaviour throughout influenza epidemics. Here a network BI model provides a new approach for understanding the risk perception spread and human behavioural change during disease outbreaks. Our study allows simultaneous consideration of epidemiological, psychological, and social factors as predictors of individual perception rates in behaviour-disease transmission systems. We suggest that a monitoring system with precise information on risk perception should be constructed to effectively promote health behaviours in preparation for emerging disease outbreaks.

Controlled Emissivity Coatings to Delay Ignition of Polyethylene

PubMed Central

Sonnier, Rodolphe; Ferry, Laurent; Gallard, Benjamin; Boudenne, Abderrahim; Lavaud, François

2015-01-01

Semi-opaque to opaque films containing small amounts of various aluminium particles to decrease emissivity were easily prepared and coated onto low-density polyethylene (LDPE) sheets. The thermal-radiative properties (reflectivity, transmissivity and absorptivity) of the films were measured and related to the aluminum particles’ content, size and nature. Time-to-ignition of samples was assessed using a cone calorimeter at different heat flux values (35, 50 and 75 kW/m2). The coatings allowed significant ignition delay and, in some cases, changed the material behaviour from thermally thin to thick behaviour. These effects are related both to their emissivity and transmissivity. A lower emissivity, which decreases during the degradation, and a lower transmissivity are the key points to ensure an optimal reaction-to-fire. PMID:28793609

Elephant behaviour and conservation: social relationships, the effects of poaching, and genetic tools for management.

PubMed

Archie, Elizabeth A; Chiyo, Patrick I

2012-02-01

Genetic tools are increasingly valuable for understanding the behaviour, evolution, and conservation of social species. In African elephants, for instance, genetic data provide basic information on the population genetic causes and consequences of social behaviour, and how human activities alter elephants' social and genetic structures. As such, African elephants provide a useful case study to understand the relationships between social behaviour and population genetic structure in a conservation framework. Here, we review three areas where genetic methods have made important contributions to elephant behavioural ecology and conservation: (1) understanding kin-based relationships in females and the effects of poaching on the adaptive value of elephant relationships, (2) understanding patterns of paternity in elephants and how poaching can alter these patterns, and (3) conservation genetic tools to census elusive populations, track ivory, and understand the behavioural ecology of crop-raiding. By comparing studies from populations that have experienced a range of poaching intensities, we find that human activities have a large effect on elephant behaviour and genetic structure. Poaching disrupts kin-based association patterns, decreases the quality of elephant social relationships, and increases male reproductive skew, with important consequences for population health and the maintenance of genetic diversity. In addition, we find that genetic tools to census populations or gather forensic information are almost always more accurate than non-genetic alternatives. These results contribute to a growing understanding of poaching on animal behaviour, and how genetic tools can be used to understand and conserve social species. © 2011 Blackwell Publishing Ltd.

ASR prevention — Effect of aluminum and lithium ions on the reaction products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leemann, Andreas, E-mail: andreas.leemann@empa.ch; Bernard, Laetitia; Alahrache, Salaheddine

2015-10-15

In spite of the recent progress in the understanding of the mechanisms enabling aluminum-containing SCM like metakaolin and added LiNO{sub 3} to limit the extent of ASR in mortar and concrete, some gaps still remain. They concern mainly the effect of aluminum-containing SCM on the formed ASR products and the influence of aggregate characteristics on the effectiveness of LiNO{sub 3}. In this study, a model system, concrete and mortar were investigated by pore solution analysis, TGA, XRD, NMR, SEM combined with EDX and ToF-SIMS to address these questions. The amount of aluminum present in the pore solution of concrete andmore » mortar is only able to slow down SiO{sub 2} dissolution but not to alter morphology, structure and composition of the reaction products. LiNO{sub 3} can suppress ASR by forming dense products protecting reactive minerals from further reaction. But its effectiveness is decreasing with increasing specific surface area of the reactive minerals in aggregates. - Highlights: • Aluminum of SCM slows down SiO{sub 2} dissolution. • Aluminum of SCM does not alter morphology and structure of ASR product. • ASR suppressing effect of LiNO{sub 3} depends on specific surface area of the aggregates.« less

Aluminum stress and its role in the phospholipid signaling pathway in plants and possible biotechnological applications.

PubMed

Poot-Poot, Wilberth; Hernandez-Sotomayor, Soledad M Teresa

2011-10-01

An early response of plants to environmental signals or abiotic stress suggests that the phospholipid signaling pathway plays a pivotal role in these mechanisms. The phospholipid signaling cascade is one of the main systems of cellular transduction and is related to other signal transduction mechanisms. These other mechanisms include the generation of second messengers and their interactions with various proteins, such as ion channels. This phospholipid signaling cascade is activated by changes in the environment, such as phosphate starvation, water, metals, saline stres, and plant-pathogen interactions. One important factor that impacts agricultural crops is metal-induced stress. Because aluminum has been considered to be a major toxic factor for agriculture conducted in acidic soils, many researchers have focused on understanding the mechanisms of aluminum toxicity in plants. We have contributed the last fifteen years in this field by studying the effects of aluminum on phospholipid signaling in coffee, one of the Mexico's primary crops. We have focused our research on aluminum toxicity mechanisms in Coffea arabica suspension cells as a model for developing future contributions to the biotechnological transformation of coffee crops such that they can be made resistant to aluminum toxicity. We conclude that aluminum is able to not only generate a signal cascade in plants but also modulate other signal cascades generated by other types of stress in plants. The aim of this review is to discuss possible involvement of the phospholipid signaling pathway in the aluminum toxicity response of plant cells. Copyright © 2011 Wiley Periodicals, Inc.

Craters in aluminum 1100 targets using glass projectiles at 1-7 km/s

NASA Technical Reports Server (NTRS)

Bernhard, R. P.; See, T. H.; Hoerz, F.; Cintala, M. J.

1994-01-01

We report on impact experiments using soda-lime glass spheres of 3.2 mm diameter and aluminum targets (1100 series). The purpose is to assist in the interpretation of LDEF instruments and in the development of future cosmic-dust collectors in low-Earth orbit. Because such instruments demand understanding of both the cratering and penetration process, we typically employ targets with thicknesses that range from massive, infinite half-space targets, to ultrathin films. This report addresses a subset of cratering experiments that were conducted to fine-tune our understanding of crater morphology as a function of impact velocity. Also, little empirical insight exists about the physical distribution and shock-metamorphism of the impactor residues as a function of encounter speed, despite their recognized significance in the analysis of space-exposed surfaces. Soda-lime glass spheres were chosen as a reasonable analog to extraterrestrial silicates, and aluminum 1100 was chosen for targets, which among the common Al-alloys, best represents the physical properties of high-purity aluminum. These materials complement existing impact studies that typically employed metallic impactors and less ductile Al-alloys. We have completed dimensional analyses of the resulting craters and are in the process of investigating the detailed distribution of the unmelted and melted impactor residues via SEM methods, as well as potential compositional modifications of the projectile melts via electron microprobe.

The effect of fabrication on corrosion in aluminum 2195: Environmental and microstructural considerations

NASA Technical Reports Server (NTRS)

Walsh, Daniel W.

1994-01-01

Aluminum alloys containing lithium are particularly attractive to the aerospace structural designer. Lithium's density is only 0.53 g/cc, thus an addition of one weight percent lithium not only increases yield strength, but decreases the density by almost three percent while increasing the modulus by over six percent. The fact that lithium improves these physical properties simultaneously has led to intense study and development of the alloy system. Heretofore, problems in large scale alloy production have retarded commercial development. During the last fifteen years, advances in production technology have rekindled interest in Al-Li alloys, and aluminum suppliers have developed many candidate aerospace materials. However, if these alloys are to be employed successfully, a more complete understanding of their nonequilibrium metallurgy is required. Peel and Starke have each pointed out that an understanding of the weldability of these alloys is a critical step in their implementation. This study addresses the critical lack of information on the environmental compatibility of welded Al 2195 components. Corrosion data for these systems is incomplete, particularly for welded materials exposed to sea water or sea water condensate.

Evaluation of Aluminum Alloy 2050-T84 Microstructure and Mechanical Properties at Ambient and Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Hafley, Robert A.; Domack, Marcia S.; Hales, Stephen J.; Shenoy, Ravi N.

2011-01-01

Aluminum alloy 2050 is being considered for the fabrication of cryogenic propellant tanks to reduce the mass of future heavy-lift launch vehicles. The alloy is available in section thicknesses greater than that of the incumbent aluminum alloy, 2195, which will enable designs with greater structural efficiency. While ambient temperature design allowable properties are available for alloy 2050, cryogenic properties are not available. To determine its suitability for use in cryogenic propellant tanks, tensile, compression and fracture tests were conducted on 4 inch thick 2050-T84 plate at ambient temperature and at -320degF. Various metallurgical analyses were also performed in order to provide an understanding of the compositional homogeneity and microstructure of 2050.

Applying social theory to understand health-related behaviours.

PubMed

Holman, Daniel; Borgstrom, Erica

2016-06-01

Health-related behaviours are a concern for contemporary health policy and practice given their association with a range of illness outcomes. Many of the policies and interventions aimed at changing health-related behaviours assume that people are more or less free to choose their behaviour and how they experience health. Within sociology and anthropology, these behaviours are viewed not as acts of choice but as actions and practices situated within a larger sociocultural context. In this paper, we outline three theoretical perspectives useful in understanding behaviours that may influence one's health in this wider context: theories of social practice, social networks and interactionism. We argue that by better understanding how health-related behaviours are performed in people's everyday lives, more suitable interventions and clinical management can be developed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

The effect of oxide film properties on the corrosion behavior of SiC/Al metal-matrix composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Golledge, S.L.

1991-01-01

Oxide growth on pure aluminum, aluminum alloy 6061, and the aluminum-based metal matrix composite SiC/AA6061 was studied, and the properties of the oxides related to the pit-initiation behavior of the materials. The objectives of the work were to identify the effect of alloying elements and SiC reinforcement on the oxide film, and to better understand how the oxide properties control pit initiation behavior. To this end, electrochemical and optical studies of the materials were carried out in a buffered sodium/boric acid solution at pH values of 8.4 and 7.2. The alloy and metal-matrix composite showed a slightly lesser tendency tomore » pit than pure aluminum, as measured by the pitting potential. The oxide on the composite was less resistant to pit initiation, and was found to exhibit slower repassivation rates than the other materials. The repassivation behavior and resistance to pit initiation were quite similar in the case of the alloy and the pure aluminum. Induction times for pit initiation were consistent with the predictions of Heusler's model for the breakdown of passivity.« less

Superhydrophobic honeycomb-like cobalt stearate thin films on aluminum with excellent anti-corrosion properties

NASA Astrophysics Data System (ADS)

Xiong, Jiawei; Sarkar, D. K.; Chen, X.-Grant

2017-06-01

Superhydrophobic cobalt stearate thin films with excellent anti-corrosion properties were successfully fabricated on aluminum substrates via electrodeposition process. The water-repellent properties were attributed to the honeycomb-like micro-nano structure as well as low surface energy of cobalt stearate. The correlation between the surface morphology, composition as well as wetting properties and the molar ratio of inorganic cobalt salt (Co(NO3)2) and organic stearic acid (SA) abbreviated as Co/SA, in the electrolyte were studied carefully. The optimum superhydrophobic surface obtained on the electrodeposited cathodic aluminum substrate, in the mixed ethanolic solution with Co/SA molar ratio of 0.2, was found to have a maximum contact angle of 161°. The polarization resistance of superhydrophobic aluminum substrates was calculated as high as 1591 kΩ cm2, which is determined to be two orders of magnitude larger than that of the as-received aluminum substrate as 27 kΩ cm2. Electrochemical impedance spectroscopy (EIS) was also employed to evaluate the corrosion resistance properties of these samples. Furthermore, electrical equivalent circuits (EEC) have been suggested in order to better understand the corrosion phenomena on these surfaces based on the corresponding EIS data.

Aluminum automotive space frames

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-08-01

Design of aluminum structures is to a new topic. Aircraft makers have successfully solved difficult structural problems with a high degree of understanding and reliability. Other transportation modes such as trucks, trailers, and railcars have faced structural problems with some emphasis on high- and low-cycle fatigue of welded aluminum structures. However, the automotive market places stringent engineering demands on materials and superimposes demanding cost constraints. A project was instituted at Reynolds Metals Co. to investigate the opportunities for the cost-effective application of aluminum to automotive spaceframes. Several areas were recognized as key to the success of this application. They were:more » equivalent or superior structural stiffness of the assembly to existing steel unibody and/or steel spaceframe vehicles; effective joining of spaceframe members; equivalent or superior crashworthiness of the assembly; weight savings; flexibility; and low-cost approach aimed at effective manufacturing. To gain experience with the key aspects in a practical environment, the experience of current builders of steel tube frame chassis was explored. These chassis are typically used in low-volume vehicles requiring torsional stiffness, excellent crashworthiness, and exterior body-style flexibility. A model was developed using finite element methods that accurately predicts mass and stiffness of frames. An effective aluminum space frame was generated which was 7.5% stiffer and more than 20% lighter than the steel frame, with stresses kept below the fatigue limit for aluminum welds.« less

Fabrication and Characterization of Flexible Organic Light Emitting Diodes Based on Transparent Flexible Clay Substrates

NASA Astrophysics Data System (ADS)

Venkatachalam, Shanmugam; Hayashi, Hiromichi; Ebina, Takeo; Nakamura, Takashi; Nanjo, Hiroshi

2013-03-01

In the present work, transparent flexible polymer-doped clay (P-clay) substrates were prepared for flexible organic light emitting diode (OLED) applications. Nanocrystalline indium tin oxide (ITO) thin films were prepared on P-clay substrates by ion-beam sputter deposition method. The structural, optical, and electrical properties of as-prepared ITO/P-clay showed that the as-prepared ITO thin film was amorphous, and the average optical transparency and sheet resistance were around 84% and 56 Ω/square, respectively. The as-prepared ITO/P-clay samples were annealed at 200 and 270 °C for 1 h to improve the optical transparency and electrical conductivity. The average optical transparency was found to be maximum at an annealing temperature of 200 °C. Finally, N,N-bis[(1-naphthyl)-N,N '-diphenyl]-1,1'-biphenyl)-4,4'-diamine (NPB), tris(8-hydroxyquinoline) aluminum (Alq3) thin films, and aluminum (Al) electrode were prepared on ITO/P-clay substrates by thermal evaporation method. The current density-voltage (J-V) characteristic of Al/NPB/ITO/P-clay showed linear Ohmic behaviour. In contrast, J-V characteristic of Al/Alq3/NPB/ITO/P-clay showed non-linear Schottky behaviour. Finally, a very flexible OLED was successfully fabricated on newly fabricated transparent flexible P-clay substrates. The electroluminescence study showed that the emission intensity of light from the flexible OLED device gradually increased with increasing applied voltage.

A theoretical study on pure bending of hexagonal close-packed metal sheet

NASA Astrophysics Data System (ADS)

Mehrabi, Hamed; Yang, Chunhui

2018-05-01

Hexagonal close-packed (HCP) metals have quite different mechanical behaviours in comparison to conventional cubic metals such as steels and aluminum alloys [1, 2]. They exhibit a significant tension-compression asymmetry in initial yielding and subsequent plastic hardening. The reason for this unique behaviour can be attributed to their limited symmetric crystal structure, which leads to twining deformation [3-5]. This unique behaviour strongly influences sheet metal forming of such metals, especially for roll forming, in which the bending is dominant. Hence, it is crucial to represent constitutive relations of HCP metals for accurate estimation of bending moment-curvature behaviours. In this paper, an analytical model for asymmetric elastoplastic pure bending with an application of Cazacu-Barlat asymmetric yield function [6] is presented. This yield function considers the asymmetrical tension-compression behaviour of HCP metals by using second and third invariants of the stress deviator tensor and a specified constant, which can be expressed in terms of uniaxial yield stresses in tension and compression. As a case study, the analytical model is applied to predict the moment-curvature behaviours of AZ31B magnesium alloy sheets under uniaxial loading condition. Furthermore, the analytical model is implemented as a user-defined material through the UMAT interface in Abaqus [7, 8] for conducting pure bending simulations. The results show that the analytical model can reasonably capture the asymmetric tension-compression behaviour of the magnesium alloy. The predicted moment-curvature behaviour has good agreement with the experimental results. Furthermore, numerical results show a better accuracy by the application of the Cazacu-Barlat yield function than those using the von-Mises yield function, which are more conservative than analytical results.

The interpretation of physical activity, exercise, and sedentary behaviours by persons with multiple sclerosis.

PubMed

Kinnett-Hopkins, Dominique; Learmonth, Yvonne; Hubbard, Elizabeth; Pilutti, Lara; Roberts, Sarah; Fanning, Jason; Wójcicki, Thomas; McAuley, Edward; Motl, Robert

2017-11-07

This study adopted a qualitative research design with directed content analysis and examined the interpretations of physical activity, exercise, and sedentary behaviour by persons with multiple sclerosis. Fifty three persons with multiple sclerosis who were enrolled in an exercise trial took part in semi-structured interviews regarding personal interpretations of physical activity, exercise, and sedentary behaviours. Forty three percent of participants indicated a consistent understanding of physical activity, 42% of participants indicated a consistent understanding of exercise, and 83% of participants indicated a consistent understanding of sedentary behaviour with the standard definitions. There was evidence of definitional ambiguity (i.e., 57, 58, and 11% of the sample for physical activity, exercise, and sedentary behaviour, respectively); 6% of the sample inconsistently defined sedentary behaviour with standard definitions. Some participants described physical activity in a manner that more closely aligned with exercise and confused sedentary behaviour with exercise or sleeping/napping. Results highlight the need to provide and utilise consistent definitions for accurate understanding, proper evaluation and communication of physical activity, exercise, and sedentary behaviours among persons with multiple sclerosis. The application of consistent definitions may minimise ambiguity, alleviate the equivocality of findings in the literature, and translate into improved communication about these behaviours in multiple sclerosis. Implications for Rehabilitation The symptoms of multiple sclerosis can be managed through participation in physical activity and exercise. Persons with multiple sclerosis are not engaging in sufficient levels of physical activity and exercise for health benefits. Rehabilitation professionals should use established definitions of physical activity, exercise, and sedentary behaviours when communicating about these behaviours among persons with multiple sclerosis.

Using optical techniques to measure aluminum burning in post-detonation explosive fireballs

NASA Astrophysics Data System (ADS)

Peuker, Jennifer Mott

The objectives of the current study are twofold: (1) to further the understanding of aluminum combustion in an explosive fireball, specifically where, when, and with what the aluminum is reacting; and (2) to characterize AlO emission measurements from aluminized explosive fireballs in order to determine when and how AlO emission can be used as an indicator of aluminum combustion. Experiments were completed in six different environments using four distinct aluminized charges of varying aluminum particle size---3 microm, 10 microm and 40 microm---and loading amount---20 and 50 percent by mass---to determine with what the aluminum is reacting. In addition, a charge containing 20 percent aluminum oxide (Al2O3) was used as an inert comparison. The effect of the aluminum particle location with respect to the explosive material was tested by using end-loaded charges, and by placing a layer of grease on the aluminized charge tip. Time-resolved overpressure measurements are used to determine when the aluminum is burning. Experiments employing an air-gap between the explosive charge and aluminum powder aid in determining how and when aluminum is activated and combusted in the initial blast wave and the subsequent fireball containing high pressure and high temperature detonation products. Tests in four environments show that even when AlO emission intensity is lower by 90 percent in N2 or CO2 than it is in air for a charge, it is possible to have significant---60 to 70 percent---aluminum particle oxidation. In addition, substantial AlO emission was measured in the absence of unburned aluminum---almost half of the peak AlO emission measured when unburned aluminum was present. Results show that AlO emission intensity measurements are skewed to higher AlO intensities by high transient temperatures within the first 30 micros when the peak AlO emission is usually measured. The aluminum particle location also affects the amount of AlO emission measured such that when more particles are on the fireball surface, then more AlO emission is measured. However, the end-loaded aluminum does not add to the energy output enhancement as much as the pre-loaded aluminum charges since the peak pressures and initial impulse are similar for different amounts of aluminum. A grease layer on the tip of the charge reduces the amount of AlO emission measured by 90 percent, but has the same energy output in the initial blast wave as the same charge not having a grease layer, indicating that the material at the tip of a charge changes the breakout and subsequent AlO emission production. In addition, the overpressure measurements indicate that four distinct stages of aluminum combustion exist. The first stage is the detonation and the activation of the aluminum. In the second stage the aluminum burns to enhance the blast wave which is indicated by higher peak pressures and initial impulses than a charge not containing aluminum. During the third stage, the aluminum continues to burn to increase the overpressure of the chamber. The fireball cools during the fourth stage and any aluminum oxidation does not add to the energy release. The variations in how much AlO emission is measured indicate that interpreting AlO emission measurements from explosive fireballs is not straightforward with respect to correctly determining the amount of aluminum combusted, how long the aluminum reacted, or the energy released. If aluminum is available to burn and AlO emission is measured, then the aluminum is burning---even taking into account AlO emission from the oxide layer. However, when no AlO emission is measured, it does not necessarily mean that the aluminum is not burning. When AlO emission is measured it indicates that the temperatures are high enough to sustain aluminum combustion which produces AlO, and that oxidizers are present which react to produce the AlO emission. The relative intensities for the same time frame of AlO emission measured could be indicators about the temperature or number of reactions occurring. (Abstract shortened by UMI.)

New trends in laser shock wave physics and applications

NASA Astrophysics Data System (ADS)

Peyre, Patrice; Carboni, Christelle; Sollier, Arnault; Berthe, Laurent; Richard, Caroline; de Los Rios, E.; Fabbro, Remy

2002-09-01

Recent applications for laser-induced shock waves have been demonstrated in the aeronautical and nuclear industries, due to the development of new generations of lasers that enable high cadency rates with rather small designs. In this paper, we first aim at making an overview on basic physical processes involved in Laser Shock Processing, and a presentation of pressure loadings generated by different laser conditions. In a second part, a specific focus is given to new ranges of applications like wear resistance, uniform and localized corrosion or modeling of fatigue behaviour after LSP. For instance it is demonstrated that the pitting corrosion behaviour of 316L steel in saline medium can be improved by laser-induced pure mechanical effects surrounding inclusions. It is also shown that wear rates of a 100Cr6 tool steel can be reduced after LSP provided applied pressures are kept below a material deposit threshold. Last but not least, the fatigue cracking behaviour of 2024-T351 aluminum alloy after LSP was improved and calculated through a computed program taking into account work hardening together with residual stress effects.

Understanding Dishonest Academic Behaviour Amongst Business Students--The Business Leaders of the Future

ERIC Educational Resources Information Center

Bagraim, Jeffrey; Goodman, Suki; Pulker, Stephanie

2014-01-01

This study applies the Theory of Planned Behaviour (TPB) to increase understanding about dishonest academic behaviour amongst undergraduate business students. A total of 579 respondents from three universities in South Africa completed an online survey about their beliefs regarding academic dishonesty, their intentions to engage in dishonest…

Frameworks for Understanding Challenging Behaviour in Out-of-Home Care

ERIC Educational Resources Information Center

McLean, Sara; Kettler, Lisa; Delfabbro, Paul; Riggs, Damien

2012-01-01

Background: Challenging and disruptive behaviour is commonly reported among children placed in the out-of-home care sector. Little is known about how stakeholders in this sector understand or manage challenging behaviour. Method: Ninety-two stakeholders in the South Australian out-of-home care sector were interviewed about their approach to…

Children's Interpretive Understanding, Moral Judgments, and Emotion Attributions: Relations to Social Behaviour

ERIC Educational Resources Information Center

Malti, Tina; Gasser, Luciano; Gutzwiller-Helfenfinger, Eveline

2010-01-01

The study investigated interpretive understanding, moral judgments, and emotion attributions in relation to social behaviour in a sample of 59 5-year-old, 123 7-year-old, and 130 9-year-old children. Interpretive understanding was assessed by two tasks measuring children's understanding of ambiguous situations. Moral judgments and emotion…

Understanding AlN Obtaining Through Computational Thermodynamics Combined with Experimental Investigation

NASA Astrophysics Data System (ADS)

Florea, R. M.

2017-06-01

Basic material concept, technology and some results of studies on aluminum matrix composite with dispersive aluminum nitride reinforcement was shown. Studied composites were manufactured by „in situ” technique. Aluminum nitride (AlN) has attracted large interest recently, because of its high thermal conductivity, good dielectric properties, high flexural strength, thermal expansion coefficient matches that of Si and its non-toxic nature, as a suitable material for hybrid integrated circuit substrates. AlMg alloys are the best matrix for AlN obtaining. Al2O3-AlMg, AlN-Al2O3, and AlN-AlMg binary diagrams were thermodynamically modelled. The obtained Gibbs free energies of components, solution parameters and stoichiometric phases were used to build a thermodynamic database of AlN- Al2O3-AlMg system. Obtaining of AlN with Liquid-phase of AlMg as matrix has been studied and compared with the thermodynamic results. The secondary phase microstructure has a significant effect on the final thermal conductivity of the obtained AlN. Thermodynamic modelling of AlN-Al2O3-AlMg system provided an important basis for understanding the obtaining behavior and interpreting the experimental results.

Understanding materials behavior from atomistic simulations: Case study of al-containing high entropy alloys and thermally grown aluminum oxide

NASA Astrophysics Data System (ADS)

Yinkai Lei

Atomistic simulation refers to a set of simulation methods that model the materials on the atomistic scale. These simulation methods are faster and cheaper alternative approaches to investigate thermodynamics and kinetics of materials compared to experiments. In this dissertation, atomistic simulation methods have been used to study the thermodynamic and kinetic properties of two material systems, i.e. the entropy of Al-containing high entropy alloys (HEAs) and the vacancy migration energy of thermally grown aluminum oxide. (Abstract shortened by ProQuest.).

Controlled Directional Solidification of Aluminum - 7 wt Percent Silicon Alloys: Comparison Between Samples Processed on Earth and in the Microgravity Environment Aboard the International Space Station

NASA Technical Reports Server (NTRS)

Grugel, Richard N.; Tewari, Surendra N.; Erdman, Robert G.; Poirier, David R.

2012-01-01

An overview of the international "MIcrostructure Formation in CASTing of Technical Alloys" (MICAST) program is given. Directional solidification processing of metals and alloys is described, and why experiments conducted in the microgravity environment aboard the International Space Station (ISS) are expected to promote our understanding of this commercially relevant practice. Microstructural differences observed when comparing the aluminum - 7 wt% silicon alloys directionally solidified on Earth to those aboard the ISS are presented and discussed.

Scaling relationships for nonadiabatic energy relaxation times in warm dense matter: toward understanding the equation of state.

PubMed

Pradhan, Ekadashi; Magyar, Rudolph J; Akimov, Alexey V

2016-11-30

Understanding the dynamics of electron-ion energy transfer in warm dense (WD) matter is important to the measurement of equation of state (EOS) properties and for understanding the energy balance in dynamic simulations. In this work, we present a comprehensive investigation of nonadiabatic electron relaxation and thermal excitation dynamics in aluminum under high pressure and temperature. Using quantum-classical trajectory surface hopping approaches, we examine the role of nonadiabatic couplings and electronic decoherence in electron-nuclear energy transfer in WD aluminum. The computed timescales range from 400 fs to 4.0 ps and are consistent with existing experimental studies. We have derived general scaling relationships between macroscopic parameters of WD systems such as temperature or mass density and the timescales of energy redistribution between quantum and classical degrees of freedom. The scaling laws are supported by computational results. We show that electronic decoherence plays essential role and can change the functional dependencies qualitatively. The established scaling relationships can be of use in modelling of WD matter.

Exploring application of the Interpersonal-Psychological Theory of Suicidal Behaviour to self-injurious behaviour among women prisoners: Proposing a new model of understanding.

PubMed

Ireland, Jane L; York, Charlotte

2012-01-01

The current study examines the application of capacity, psychological distress, coping and personality to an understanding of self-injurious behaviour, with a specific focus on testing the Interpersonal-Psychological Theory of Suicidal Behaviour (IPTSB). One hundred and ninety women prisoners took part, completing a history questionnaire and measures of personality, coping styles and psychological distress. It was expected that self-injurious behaviour would be predicted by higher levels of emotional functioning difficulties, by an increased capacity to engage in such behaviours, by previous self-injurious behaviour, decreased levels of emotional stability and increased levels of emotional coping behaviour. Results supported the capacity component of the IPTSB, indicating that an increased history of self-injurious behaviour and of engagement in reckless behaviour were particular predictors. Increased psychological distress in some domains was also a predictor although the exact domain varied across the type of self-injurious engagement Increased levels of extraversion and decreased emotional coping predicted increased self-injurious engagement, although emotional coping only related to threats and cognition. The results point to the applicability of Interpersonal-Psychological Theory to understanding self-injurious behaviour and the importance of developing a revised model. The paper presents this in the form of the Integrated Model of Self-Injurious Activity. Copyright © 2011 Elsevier Ltd. All rights reserved.

Rapid Aluminum Nanoparticle Production by Milling in NH₃ and CH₃NH₂ Atmospheres: An Experimental and Theoretical Study.

PubMed

McMahon, Brandon W; Yu, Jiang; Boatz, Jerry A; Anderson, Scott L

2015-07-29

Ball milling of aluminum in gaseous atmospheres of ammonia and monomethylamine (MMA) was found to produce particles in the 100 nm size range with high efficiency. A combination of mass spectrometry, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis with mass spectrometric product analysis (TGA-MS), scanning electron microscopy (SEM), infrared spectroscopy, and dynamic light scattering (DLS) was used to study the particles and the chemical interactions responsible for particle production. To help understand the nature of the surface chemistry, high level quantum chemical calculations were performed to predict the structures and energetics for binding and reactions of NH3 and MMA on aluminum surfaces. Both NH3 and MMA react with aluminum under milling conditions, producing H2 and other gaseous products, and leaving the surfaces functionalized. The surface functionalization enhances size reduction by reducing the surface free energy and the tendency toward mechanochemical welding. For both NH3 and MMA, the particle cores are metallic aluminum, but the surface chemical properties are quite different. The ammonia-milled particles are capped by an AlNxOyHz layer ∼10 nm thick, which passivates the particles. The MMA-milled particles are capped with a thinner passivating layer, such that they are pyrophoric in air and react with N2 at elevated temperatures.

Global transcriptomic response of Anoxybacillus sp. SK 3-4 to aluminum exposure.

PubMed

Lim, Jia Chun; Thevarajoo, Suganthi; Selvaratnam, Chitra; Goh, Kian Mau; Shamsir, Mohd Shahir; Ibrahim, Zaharah; Chong, Chun Shiong

2017-02-01

Anoxybacillus sp. SK 3-4 is a Gram-positive, rod-shaped bacterium and a member of family Bacillaceae. We had previously reported that the strain is an aluminum resistant thermophilic bacterium. This is the first report to provide a detailed analysis of the global transcriptional response of Anoxybacillus when the cells were exposed to 600 mg L -1 of aluminum. The transcriptome was sequenced using Illumina MiSeq sequencer. Total of 708 genes were differentially expressed (fold change >2.00) with 316 genes were up-regulated while 347 genes were down-regulated, in comparing to control with no aluminum added in the culture. Based on Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis, the majority of genes encoding for cell metabolism such as glycolysis, sulfur metabolism, cysteine and methionine metabolism were up-regulated; while most of the gene associated with tricarboxylic acid cycle (TCA cycle) and valine, leucine and isoleucine metabolism were down-regulated. In addition, a significant number of the genes encoding ABC transporters, metal ions transporters, and some stress response proteins were also differentially expressed following aluminum exposure. The findings provide further insight and help us to understand on the resistance of Anoxybacillus sp. SK 3-4 toward aluminium. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Weldability of extruded aluminum-alumina composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gedeon, S.A.; Lane, C.; Altshuller, B.

1994-12-31

Acceptable procedure were developed for welding the following types of aluminum particle-reinforced aluminum: 6061/Al{sub 2}O{sub 3}/10p-T6, 6061/Al{sub x}/O{sub 3}20p-T6, and 7005Al{sub 2}O{sub 3}/10p-T6,. Automated and manual procedures were developed and using both gas tungsten arc welding (GTAW), with a cold wire feed, and gas metal arc welding (GMAW). The effect of welding procedures on porosity, reinforcing particulate distribution, and mechanical properties was determined. Postweld heat treatment and microhardness testing were used to understand the effect of the welded microstructure on the strength and ductility of the joint. Fracture surfaces and transverse microsections of mechanical test specimens were examined to determinemore » the origins and mechanisms of failure. Cleanliness of the joint and weld wire were found to be essential to eliminate porosity. Based on these experimentally determined data, general guidelines for welding aluminum oxide particle-reinforced aluminum composites are proposed. Discussion includes proper selection of weld joint geometry, filler metals, travel speed, voltage, and current ranges. These parameters are compared to those used in an actual production environment for composite products. Distinctions between welding these composites and others produced via powder metallurgy or with silicon carbide reinforcements are also discussed.« less

The mineralogy of bauxite for producing smelter-grade alumina

NASA Astrophysics Data System (ADS)

Authier-Martin, M.; Forte, G.; Ostap, S.; See, J.

2001-12-01

Aluminum-producing companies rely on low-cost, high-purity, smelter-grade alumina (aluminum oxide), and alumina production utilizes the bulk of bauxites mined world-wide. The mineralogy of the bauxites has a significant impact on the operation of the Bayer process for alumina production. Typically, the Bayer process produces smelter-grade alumina of 99.5% Al2O3, starting from bauxite containing 30% to 60% Al2O3. The main objective of the Bayer process is to extract the maximum amount of aluminum from the bauxite at as high an aluminate concentration in solution as possible, while limiting any troublesome side reactions. Only with a better understanding of the chemistry of the mineral species and a strict control of the operating/processing conditions can the Bayer process produce efficiently, a low cost, high-quality alumina with minimum detrimental environmental impact.

Optical technique to measure distortion on heat treated parts

NASA Astrophysics Data System (ADS)

Sciammarella, Federico Mariano

The use of aluminum for structural applications grows with the continual improvement of their physical properties. Through the various amounts of heat treatments that are available, aluminum can vary in properties for all different types of applications. The automotive industry has benefited the most from the use of aluminum and they continue to seek more uses. The heat treatments of these parts are very vital in providing the properties needed for their particular applications. Moreover understanding the effects of heat treatments that may cause distortion to a part is critical. Most of the work carried out in this field is a pre and post measurement after part has experienced its treatment. In this study, we carry out in-situ measurements of the distortions that a heat-treated part undergoes when subjected to temperatures near melting followed by a slow cooling. In order to confirm the experimental measurements we used HOTPOINT to simulate the experiment and compare results. This study will provide much needed insight to the complex occurrences that aluminum parts undergo during heat treatment.

Corrosion Properties of Dissimilar Friction Stir Welded 6061 Aluminum and HT590 Steel

NASA Astrophysics Data System (ADS)

Seo, Bosung; Song, Kuk Hyun; Park, Kwangsuk

2018-05-01

Corrosion properties of dissimilar friction stir welded 6061 aluminum and HT590 steel were investigated to understand effects of galvanic corrosion. As cathode when coupled, HT590 was cathodically protected. However, the passivation of AA6061 made the aluminum alloy cathode temporarily, which leaded to corrosion of HT590. From the EIS analysis showing Warburg diffusion plot in Nyquist plots, it can be inferred that the stable passivation layer was formed on AA6061. However, the weld as well as HT590 did not show Warburg diffusion plot in Nyquist plots, suggesting that there was no barrier for corrosion or even if it exists, the barrier had no function for preventing and/or retarding charge transport through the passivation layer. The open circuit potential measurements showed that the potential of the weld was similar to that of HT590, which lied in the pitting region for AA6061, making the aluminum alloy part of the weld keep corrosion state. That resulted in the cracked oxide film on AA6061 of the weld, which could not play a role of corrosion barrier.

Calcium and aluminum cycling in a temperate broadleaved deciduous forest of the eastern USA: relative impacts of tree species, canopy state, and flux type.

PubMed

Levia, Delphis F; Shiklomanov, Alexey N; Van Stan, John T; Scheick, Carrie E; Inamdar, Shreeram P; Mitchell, Myron J; McHale, Patrick J

2015-07-01

Ca/Al molar ratios are commonly used to assess the extent of aluminum stress in forests. This is among the first studies to quantify Ca/Al molar ratios for stemflow. Ca/Al molar ratios in bulk precipitation, throughfall, stemflow, litter leachate, near-trunk soil solution, and soil water were quantified for a deciduous forest in northeastern MD, USA. Data were collected over a 3-year period. The Ca/Al molar ratios in this study were above the threshold for aluminum stress (<1). Fagus grandifolia Ehrh. (American beech) had a median annual stemflow Ca/Al molar ratio of 15.7, with the leafed and leafless values of 12.4 and 19.2, respectively. The corresponding Ca/Al molar ratios for Liriodendron tulipifera L. (yellow poplar) were 11.9 at the annual time scale and 11.9 and 13.6 for leafed and leafless periods, respectively. Bayesian statistical analysis showed no significant effect of canopy state (leafed, leafless) on Ca/Al molar ratios. DOC was consistently an important predictor of calcium, aluminum, and Ca/Al ratios. pH was occasionally an important predictor of calcium and aluminum concentrations, but was not a good predictor of Ca/Al ratio in any of the best-fit models (of >500 examined). This study supplies new data on Ca/Al molar ratios for stemflow from two common deciduous tree species. Future work should examine Ca/Al molar ratios in stemflow of other species and examine both inorganic and organic aluminum species to better gauge the potential for, and understand the dynamics of, aluminum toxicity in the proximal area around tree boles.

The use of behavioural theories in end-of-life care research: A systematic review.

PubMed

Scherrens, Anne-Lore; Beernaert, Kim; Robijn, Lenzo; Deliens, Luc; Pauwels, Nele S; Cohen, Joachim; Deforche, Benedicte

2018-06-01

It is necessary to understand behaviours that contribute to improvement in the quality of end-of-life care; use of behavioural theories allows identification of factors underlying end-of-life care behaviour, but little is known about the extent to which, and in what manner, these theories are used in an end-of-life care research context. To assess the number of end-of-life care studies that have used behavioural theories, which theories were used, to what extent main constructs were explored/measured and which behavioural outcomes were examined. We conducted a systematic review. The protocol was registered on PROSPERO (CRD42016036009). The MEDLINE (PubMed), PsycINFO, EMBASE, Web of Science and CINAHL databases were searched from inception to June 2017. We included studies aimed at understanding or changing end-of-life care behaviours and that explicitly referred to individual behavioural theories. We screened 2231 records by title and abstract, retrieved 43 full-text articles and included 31 studies - 27 quantitative (of which four (quasi-)randomised controlled trials) and four qualitative - for data extraction. More than half used the Theory of Planned Behaviour (9), the Theory of Reasoned Action (4) or the Transtheoretical Model (8). In 9 of 31 studies, the theory was fully used, and 16 of the 31 studies focussed on behaviours in advance care planning. In end-of-life care research, the use of behavioural theories is limited. As many behaviours can determine the quality of care, their more extensive use may be warranted if we want to better understand and influence behaviours and improve end-of-life care.

On the deflagration-to-detonation transition (DDT) process with added energetic solid particles for pulse detonation engines (PDE)

NASA Astrophysics Data System (ADS)

Nguyen, V. B.; Li, J.; Chang, P.-H.; Phan, Q. T.; Teo, C. J.; Khoo, B. C.

2018-01-01

In this paper, numerical simulations are performed to study the dynamics of the deflagration-to-detonation transition (DDT) in pulse detonation engines (PDE) using energetic aluminum particles. The DDT process and detonation wave propagation toward the unburnt hydrogen/air mixture containing solid aluminum particles is numerically studied using the Eulerian-Lagrangian approach. A hybrid numerical methodology combined with appropriate sub-models is used to capture the gas dynamic characteristics, particle behavior, combustion characteristics, and two-way solid-particle-gas flow interactions. In our approach, the gas mixture is expressed in the Eulerian frame of reference, while the solid aluminum particles are tracked in the Lagrangian frame of reference. The implemented computer code is validated using published benchmark problems. The obtained results show that the aluminum particles not only shorten the DDT length but also reduce the DDT time. The improvement of DDT is primarily attributed to the heat released from surface chemical reactions on the aluminum particles. The temperatures associated with the DDT process are greater than the case of non-reacting particles added, with an accompanying rise in the pressure. For an appropriate range of particle volume fraction, particularly in this study, the higher volume fraction of the micro-aluminum particles added in the detonation chamber can lead to more heat energy released and more local instabilities in the combustion process (caused by the local high temperature), thereby resulting in a faster DDT process. In essence, the aluminum particles contribute to the DDT process of successfully transitioning to detonation waves for (failure) cases in which the fuel gas mixture can be either too lean or too rich. With a better understanding of the influence of added aluminum particles on the dynamics of the DDT and detonation process, we can apply it to modify the geometry of the detonation chamber (e.g., the length of the detonation tube) accordingly to improve the operational performance of the PDE.

Walking the line: Understanding pedestrian behaviour and risk at rail level crossings with cognitive work analysis.

PubMed

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G; Stanton, Neville A

2016-03-01

Pedestrian fatalities at rail level crossings (RLXs) are a public safety concern for governments worldwide. There is little literature examining pedestrian behaviour at RLXs and no previous studies have adopted a formative approach to understanding behaviour in this context. In this article, cognitive work analysis is applied to understand the constraints that shape pedestrian behaviour at RLXs in Melbourne, Australia. The five phases of cognitive work analysis were developed using data gathered via document analysis, behavioural observation, walk-throughs and critical decision method interviews. The analysis demonstrates the complex nature of pedestrian decision making at RLXs and the findings are synthesised to provide a model illustrating the influences on pedestrian decision making in this context (i.e. time, effort and social pressures). Further, the CWA outputs are used to inform an analysis of the risks to safety associated with pedestrian behaviour at RLXs and the identification of potential interventions to reduce risk. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Towards improved behavioural testing in aquatic toxicology: Acclimation and observation times are important factors when designing behavioural tests with fish.

PubMed

Melvin, Steven D; Petit, Marie A; Duvignacq, Marion C; Sumpter, John P

2017-08-01

The quality and reproducibility of science has recently come under scrutiny, with criticisms spanning disciplines. In aquatic toxicology, behavioural tests are currently an area of controversy since inconsistent findings have been highlighted and attributed to poor quality science. The problem likely relates to limitations to our understanding of basic behavioural patterns, which can influence our ability to design statistically robust experiments yielding ecologically relevant data. The present study takes a first step towards understanding baseline behaviours in fish, including how basic choices in experimental design might influence behavioural outcomes and interpretations in aquatic toxicology. Specifically, we explored how fish acclimate to behavioural arenas and how different lengths of observation time impact estimates of basic swimming parameters (i.e., average, maximum and angular velocity). We performed a semi-quantitative literature review to place our findings in the context of the published literature describing behavioural tests with fish. Our results demonstrate that fish fundamentally change their swimming behaviour over time, and that acclimation and observational timeframes may therefore have implications for influencing both the ecological relevance and statistical robustness of behavioural toxicity tests. Our review identified 165 studies describing behavioural responses in fish exposed to various stressors, and revealed that the majority of publications documenting fish behavioural responses report extremely brief acclimation times and observational durations, which helps explain inconsistencies identified across studies. We recommend that researchers applying behavioural tests with fish, and other species, apply a similar framework to better understand baseline behaviours and the implications of design choices for influencing study outcomes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of Hypervelocity Impacts on Silicone Elastomer Seals and Mating Aluminum Surfaces

NASA Technical Reports Server (NTRS)

deGroh, Henry C., III; Steinetz, Bruce M.

2009-01-01

While in space silicone based elastomer seals planned for use on NASA's Crew Exploration Vehicle (CEV) are exposed to threats from micrometeoroids and orbital debris (MMOD). An understanding of these threats is required to assess risks to the crew, the CEV orbiter, and missions. An Earth based campaign of hypervelocity impacts on small scale seal rings has been done to help estimate MMOD threats to the primary docking seal being developed for the Low Impact Docking System (LIDS). LIDS is being developed to enable the CEV to dock to the ISS (International Space Station) or to Altair (NASA's next lunar lander). The silicone seal on LIDS seals against aluminum alloy flanges on ISS or Altair. Since the integrity of a seal depends on both sealing surfaces, aluminum targets were also impacted. The variables considered in this study included projectile mass, density, speed, incidence angle, seal materials, and target surface treatments and coatings. Most of the impacts used a velocity near 8 km/s and spherical aluminum projectiles (density = 2.7 g/cubic cm), however, a few tests were done near 5.6 km/s. Tests were also performed using projectile densities of 7.7, 2.79, 2.5 or 1.14 g/cubic cm. Projectile incidence angles examined included 0 deg, 45 deg, and 60 deg from normal to the plane of the target. Elastomer compounds impacted include Parker's S0383-70 and Esterline's ELA-SA-401 in the as received condition, or after an atomic oxygen treatment. Bare, anodized and nickel coated aluminum targets were tested simulating the candidate mating seal surface materials. After impact, seals and aluminum plates were leak tested: damaged seals were tested against an undamaged aluminum plate; and undamaged seals were placed at various locations over craters in aluminum plates. It has been shown that silicone elastomer seals can withstand an impressive level of damage before leaking beyond allowable limits. In general on the tests performed to date, the diameter of the crater in either the elastomer, or the aluminum, must be at least as big as 80% to 90% of width of the bulb of the seal before significant leakage occurs.

Effects of Hypervelocity Impacts on Silicone Elastomer Seals and Mating Aluminum Surfaces

NASA Technical Reports Server (NTRS)

deGroh, Henry C., III; Steinetz, Bruce M.

2009-01-01

While in space silicone based elastomer seals planned for use on NASA's Crew Exploration Vehicle (CEV) are exposed to threats from micrometeoroids and orbital debris (MMOD). An understanding of these threats is required to assess risks to the crew, the CEV orbiter, and missions. An Earth based campaign of hypervelocity impacts on small scale seal rings has been done to help estimate MMOD threats to the primary docking seal being developed for the Low Impact Docking System (LIDS). LIDS is being developed to enable the CEV to dock to the ISS (International Space Station) or to Altair (NASA's next lunar lander). The silicone seal on LIDS seals against aluminum alloy flanges on ISS or Altair. Since the integrity of a seal depends on both sealing surfaces, aluminum targets were also impacted. The variables considered in this study included projectile mass, density, speed, incidence angle, seal materials, and target surface treatments and coatings. Most of the impacts used a velocity near 8 km/s and spherical aluminum projectiles (density = 2.7 g/cubic centimeter), however, a few tests were done near 5.6 km/s. Tests were also performed using projectile densities of 7.7, 2.79, 2.5 or 1.14 g/cubic centimeter. Projectile incidence angles examined included 0 degrees, 45 degrees , and 60 degrees from normal to the plane of the target. Elastomer compounds impacted include Parker's S0383-70 and Esterline's ELA-SA-401 in the as received condition, or after an atomic oxygen treatment. Bare, anodized and nickel coated aluminum targets were tested simulating the candidate mating seal surface materials. After impact, seals and aluminum plates were leak tested: damaged seals were tested against an undamaged aluminum plate; and undamaged seals were placed at various locations over craters in aluminum plates. It has been shown that silicone elastomer seals can withstand an impressive level of damage before leaking beyond allowable limits. In general on the tests performed to date, the diameter of the crater in either the elastomer, or the aluminum, must be at least as big as 80% to 90% of width of the bulb of the seal before significant leakage occurs.

Recrystallization and Grain Growth Kinetics in Binary Alpha Titanium-Aluminum Alloys

NASA Astrophysics Data System (ADS)

Trump, Anna Marie

Titanium alloys are used in a variety of important naval and aerospace applications and often undergo thermomechanical processing which leads to recrystallization and grain growth. Both of these processes have a significant impact on the mechanical properties of the material. Therefore, understanding the kinetics of these processes is crucial to being able to predict the final properties. Three alloys are studied with varying concentrations of aluminum which allows for the direct quantification of the effect of aluminum content on the kinetics of recrystallization and grain growth. Aluminum is the most common alpha stabilizing alloying element used in titanium alloys, however the effect of aluminum on these processes has not been previously studied. This work is also part of a larger Integrated Computational Materials Engineering (ICME) effort whose goal is to combine both computational and experimental efforts to develop computationally efficient models that predict materials microstructure and properties based on processing history. The static recrystallization kinetics are measured using an electron backscatter diffraction (EBSD) technique and a significant retardation in the kinetics is observed with increasing aluminum concentration. An analytical model is then used to capture these results and is able to successfully predict the effect of solute concentration on the time to 50% recrystallization. The model reveals that this solute effect is due to a combination of a decrease in grain boundary mobility and a decrease in driving force with increasing aluminum concentration. The effect of microstructural inhomogeneities is also experimentally quantified and the results are validated with a phase field model for recrystallization. These microstructural inhomogeneities explain the experimentally measured Avrami exponent, which is lower than the theoretical value calculated by the JMAK model. Similar to the effect seen in recrystallization, the addition of aluminum also significantly slows downs the grain growth kinetics. This is generally attributed to the solute drag effect due to segregation of solute atoms at the grain boundaries, however aluminum segregation is not observed in these alloys. The mechanism for this result is explained and is used to validate the prediction of an existing model for solute drag.

Empowering parents to understand and manage children's behaviour.

PubMed

Boot, Ann

2010-01-01

While there are many projects successfully targeting the problems associated with the management of unwanted behaviour in children, this article suggests that all parents would benefit from a greater understanding of how to manage such behaviour. Health visitors and their teams are well placed to help parents to understand what is normal behaviour for different ages and developmental stages and empower them to find solutions for unwanted behaviours. However, current financial constraints which allow health visitors to focus only on specific groups mean that they are not able to provide this help as a universal service. Teaching parents to observe their child and record their findings, an approach used by a health visitor-led programme in Wales, provides an opportunity for significant learning to take place. Through such programmes, parents acquire skills that boost their self-esteem and confidence, which in turn empower them to be proactive in the promotion of their family's health and well-being.

Aggressive Behaviour and Its Prevalence within Five Typologies

ERIC Educational Resources Information Center

Crotty, Gerard; Doody, Owen; Lyons, Rosemary

2014-01-01

Crucial to understanding an individual, presenting with intellectual disability and the management of their challenging behaviours, is the knowledge of the types of those specific behaviours. The term aggressive behaviour is a universal term that embraces many aspects of behaviour that vary in terms of severity, frequency and seriousness for the…

Re-Conceptualizing Adult Education's Monolithic Behaviourist Interpretation: Toward a New Understanding of Radical Behaviourism

ERIC Educational Resources Information Center

Roessger, Kevin M.

2012-01-01

The philosophy of radical behaviourism remains misunderstood within the field of adult education. Contributing to this trend is the field's homogeneous behaviourist interpretation, which attributes methodological behaviourism's principles to radical behaviourism. The guiding principles and assumptions of radical behaviourism are examined to…

Genomic tools for behavioural ecologists to understand repeatable individual differences in behaviour.

PubMed

Bengston, Sarah E; Dahan, Romain A; Donaldson, Zoe; Phelps, Steven M; van Oers, Kees; Sih, Andrew; Bell, Alison M

2018-06-01

Behaviour is a key interface between an animal's genome and its environment. Repeatable individual differences in behaviour have been extensively documented in animals, but the molecular underpinnings of behavioural variation among individuals within natural populations remain largely unknown. Here, we offer a critical review of when molecular techniques may yield new insights, and we provide specific guidance on how and whether the latest tools available are appropriate given different resources, system and organismal constraints, and experimental designs. Integrating molecular genetic techniques with other strategies to study the proximal causes of behaviour provides opportunities to expand rapidly into new avenues of exploration. Such endeavours will enable us to better understand how repeatable individual differences in behaviour have evolved, how they are expressed and how they can be maintained within natural populations of animals.

Aluminum Potassium Sulfate and Tannic Acid Injection for Hemorrhoids

PubMed Central

2012-01-01

A quick hemostatic effect, as well as sclerosing and shrinkage of hemorrhoids, can be attained when internal hemorrhoids are treated by using injection therapy with aluminum potassium sulfate and tannic acid (ALTA), the outcomes of treatment may be similar to those of a hemorrhoidectomy. However, if the type of hemorrhoid or the method of injection is not appropriate for ALTA treatment, complications peculiar to ALTA or recurrence may develop. Accordingly, sufficient understanding of the treatment mechanism of ALTA injection and repeated training for injection are required for effective use of the ALTA treatment. PMID:22606645

Experimental Characterization of Aluminum-Based Hybrid Composites Obtained Through Powder Metallurgy

NASA Astrophysics Data System (ADS)

Marcu, D. F.; Buzatu, M.; Ghica, V. G.; Petrescu, M. I.; Popescu, G.; Niculescu, F.; Iacob, G.

2018-06-01

The paper presents some experimental results concerning fabrication through powder metallurgy (P/M) of aluminum-based hybrid composites - Al/Al2O3/Gr. In order to understand the mechanisms that occur during the P/M processes of obtaining Al/Al2O3/Gr composite, we correlated the physical characteristics with their micro-structural characteristics. The characterization was performed using analysis techniques specific for P/M process, SEM-EDS and XRD analyses. Micro-structural characterization of the composites has revealed fairly uniform distribution this resulting in good properties of the final composite material.

Mechanical energy storage performance of an aluminum fumarate metal–organic framework† †Electronic supplementary information (ESI) available: Experimental procedures, X-ray diffraction, and molecular simulation. See DOI: 10.1039/c5sc02794b

PubMed Central

Vanduyfhuys, Louis; Alvarez, Elsa; Rodriguez, Julien; Itié, Jean-Paul; Fabry, Paul; Guillou, Nathalie; Devic, Thomas; Beurroies, Isabelle; Llewellyn, Philip L.; Van Speybroeck, Veronique; Serre, Christian; Maurin, Guillaume

2016-01-01

The aluminum fumarate MOF A520 or MIL-53–FA is revealed to be a promising material for mechanical energy-related applications with performances in terms of work and heat energies which surpass those of any porous solids reported so far. Complementary experimental and computational tools are deployed to finely characterize and understand the pressure-induced structural transition at the origin of these unprecedented levels of performance. PMID:29861993

3-(Triethoxysilyl)propionitrile sol-gel coating.

PubMed

Li, Ying-Sing; Xiao, Yun; Wright, Paul B; Tran, Tuan

2005-05-01

3-(Triethoxysilyl)propionitrile (TESPN) sol-gel has been prepared under different conditions. It was employed for coating the surfaces of quartz and aluminum. Infrared (IR) and Raman spectra of TESPN and TESPN sol-gels have been recorded in the study of the sol-gel process. Transmission and reflection absorption IR (RAIR) spectra of TESPN sol-gel coated quartz and aluminum have also been collected for better understanding the film formation on the substrate surfaces. Spectra collected at different temperatures indicated that the silane film on quartz decomposes at 700 degrees C. Results from thermal gravimetric analysis (TGA) supported this result. Based on the group frequencies and the spectral behavior in different states, some vibrational modes were assigned to the observed bands. The anticorrosion behavior of the sol-gel coated aluminum in comparison with the uncoated metal was evaluated by measuring the potentiodynamic polarization and electrochemical impedance spectra (EIS).

Influence of insulating coating on aluminum wire explosions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Yang; Wu, Jian, E-mail: jxjawj@gmail.com; State Key Laboratory of Intense Pulse Radiation of Simulation and Effect, Northwest Institute of Nuclear Technology, Xi'an 710024

2014-10-15

Single wire explosions are widely used in understanding the early stages of z-pinch experiments. This paper presents a serial of experiments conducted on the pulse power generator with ∼1 kA peak current and ∼10 ns rising time in Xi'an Jiao Tong University. Polyimide coated aluminum wires and uncoated ones were tested under three different voltages to analyze the effect of insulating coating. Experimental results showed that insulating coating can increase the energy deposition 10%∼30% in aluminum wires by delaying the voltage collapse and raising the maximum load resistance. The substantial energy deposition resulted in about 20% faster expansion rates for coated wires.more » Experimental evidence that plasma channel shunts the current from the wire core was observed by streak camera and schlieren graphs. This paper also briefly discussed the influence of nonuniform coating on the morphology of wire expansion.« less

Unravelling the Chemical Influence of Water on the PMMA/Aluminum Oxide Hybrid Interface In Situ

DOE PAGES

Pletincx, Sven; Marcoen, Kristof; Trotochaud, Lena; ...

2017-10-17

Understanding the stability of chemical interactions at the polymer/metal oxide interface under humid conditions is vital to understand the long-term durability of hybrid systems. Therefore, the interface of ultrathin PMMA films on native aluminum oxide, deposited by reactive adsorption, was studied. The characterization of the interface of the coated substrates was performed using ambient pressure X-ray photoelectron spectroscopy (APXPS), Fourier transform infrared spectroscopy in the Kretschmann geometry (ATR-FTIR Kretschmann) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The formation of hydrogen bonds and carboxylate ionic bonds at the interface are observed. The formed ionic bond is stable up to 5 Torrmore » water vapour pressure as shown by APXPS. However, when the coated samples are exposed to an excess of aqueous electrolyte, an increase in the amount of carboxylate bonds at the interface, as a result of hydrolysis of the methoxy group, is observed by ATR-FTIR Kretschmann. In conclusion, these observations, supported by ToF-SIMS spectra, lead to the proposal of an adsorption mechanism of PMMA on aluminum oxide, which shows the formation of methanol at the interface and the effect of water molecules on the different interfacial interactions.« less

Introduction to the Special Issue: Beyond traits: integrating behaviour into plant ecology and biology.

PubMed

Cahill, James F

2015-10-26

The way that plants are conceptualized in the context of ecological understanding is changing. In one direction, a reductionist school is pulling plants apart into a list of measured 'traits', from which ecological function and outcomes of species interactions may be inferred. This special issue offers an alternative, and more holistic, view: that the ecological functions performed by a plant will be a consequence not only of their complement of traits but also of the ways in which their component parts are used in response to environmental and social conditions. This is the realm of behavioural ecology, a field that has greatly advanced our understanding of animal biology, ecology and evolution. Included in this special issue are 10 articles focussing not on the tried and true metaphor that plant growth is similar to animal movement, but instead on how application of principles from animal behaviour can improve our ability to understand plant biology and ecology. The goals are not to draw false parallels, nor to anthropomorphize plant biology, but instead to demonstrate how existing and robust theory based on fundamental principles can provide novel understanding for plants. Key to this approach is the recognition that behaviour and intelligence are not the same. Many organisms display complex behaviours despite a lack of cognition (as it is traditionally understood) or any hint of a nervous system. The applicability of behavioural concepts to plants is further enhanced with the realization that all organisms face the same harsh forces of natural selection in the context of finding resources, mates and coping with neighbours. As these ecological realities are often highly variable in space and time, it is not surprising that all organisms-even plants-exhibit complex behaviours to handle this variability. The articles included here address diverse topics in behavioural ecology, as applied to plants: general conceptual understanding, plant nutrient foraging, root-root interactions, and using and helping others. As a group, the articles in this special issue demonstrate how plant ecological understanding can be enhanced through incorporation of behavioural ideas and set the stage for future research in the emerging discipline of plant behavioural ecology. Published by Oxford University Press on behalf of the Annals of Botany Company.

Secondary Aluminum Processing Waste: Salt Cake ...

EPA Pesticide Factsheets

Thirty-nine salt cake samples were collected from 10 SAP facilities across the U.S. The facilities were identified by the Aluminum Association to cover a wide range of processes. Results suggest that while the percent metal leached from the salt cake was relatively low, the leachable metal content may still pose a contamination concern and potential human and ecological exposure if uncontrollably released to the environment. As a result, salt cake should always be managed at facilities that utilize synthetic liner systems with leachate collection (the salt content of the leachate will increase the hydraulic conductivity of clay liners within a few years of installation). The mineral phase analysis showed that various species of aluminum are present in the salt cake samples with a large degree of variability. The relative abundance of various aluminum species was evaluated but it is noted that the method used is a semi-quantitative method and as a result there is a limitation for the data use. The analysis only showed a few aluminum species present in salt cake which does not exclude the presence of other crystalline species especially in light of the variability observed in the samples. Results presented in this document are of particular importance when trying to understand concerns associated with the disposal of salt cake in MSW landfills. From the end-of-life management perspective, data presented here suggest that salt cake should not be size reduce

Energy behaviours of northern California Girl Scouts and their families

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boudet, H; Ardoin, NM; Flora, J

Climate change is likely the most critical societal challenge to the futures of today's children. Mitigation will require a concerted effort to change household energy behaviour electricity use, transportation and food consumption patterns. A first step to changing behaviour is to better understand current behaviour and its intrapersonal (knowledge and attitudes), interpersonal (norms, communication and behaviour) and contextual (demographics and geography) correlates. To date, our understanding of the energy behaviours of children is limited. To begin to fill this gap, we report the results of a survey on the electricity, transportation and food-related energy behaviours of 323 fourth- and fifth-grademore » girls and their parents in 31 Girl Scout troops in Northern California. Our findings show positive attitudes and perceived norms toward energy-saving behaviours among child and adult respondents, but low or moderate levels of knowledge, communication, and behaviour, particularly for behaviours that require adult assistance. Girls' choices about electricity behaviours appear to be governed by intrapersonal and interpersonal influences, while transportation behaviour is constrained by geographic context. Food-related behaviour, particularly meat consumption, was not readily modelled. Policy and education-related implications for future interventions aimed at enhancing children's energy-saving behaviours are discussed. (C) 2014 Elsevier Ltd. All rights reserved.« less

Surface Water Geochemistry, Sediment, and Field Parameters During Snowmelt and Monsoons in the New Mexico Reach of the Animas and San Juan Rivers, 2016

NASA Astrophysics Data System (ADS)

Blake, J.; Brown, J. E.; Mast, A.

2017-12-01

Following the release of three million gallons of metals laden surface water from the Gold King Mine in August 2015, surface-water samples were collected in the New Mexico reach of the Animas and San Juan Rivers during 2016 snowmelt and in the Animas River during three 2016 monsoonal storms. These samples were evaluated for dissolved (<0.45 µm) and total (unfiltered) concentrations of trace elements including aluminum, arsenic, iron, lead, and manganese. Dissolved concentrations of aluminum, iron, and lead account for between 0.70 % and 14% of their total metal concentrations; the manganese and arsenic range of dissolved concentrations compared to total concentrations ranges from 1.2%-75%. Concentrations of total aluminum, arsenic, iron, lead, manganese increase during the rising limb of all hydrographs, suggesting a relationship with sediment concentrations, which also increase with increasing streamflow. Aluminum and iron have the highest total concentrations, 63,400 µg/L and 82,500 µg/L, respectively. Lead and arsenic total concentrations range from 0.67 to 65.5 µg/L and 0.6 to 17 µg/L, respectively. Metals such as lead and arsenic are known to adsorb to iron and aluminum particulates. During snowmelt, the relations of total aluminum and iron to total lead and arsenic are positive and linear, while during monsoonal events, the relations are polynomial. These relations may be due to the source of metals during the specific hydrologic event. Relations between discrete water quality data and continuously monitored field parameters such as turbidity and specific conductance can provide insight to changes in concentrations of the river on a finer time scale. Regression models developed for selected sites on the Animas and San Juan Rivers show that flow, turbidity and specific conductance may be useful in understanding the relationship between total metal concentrations and real-time parameters. Surrogates for suspended sediment such as hydroacoustic may also be useful, and potentially the best option in this system, for monitoring the concentration of metals in surface water. Further evaluation of the chemistry of the watershed soils and bedrock, the streambed sediments, and suspended sediments will improve understanding of the geochemical processes in the Animas and San Juan Rivers.

Cellular Magnesium Matrix Foam Composites for Mechanical Damping Applications

NASA Astrophysics Data System (ADS)

Shunmugasamy, Vasanth Chakravarthy; Mansoor, Bilal; Gupta, Nikhil

2016-01-01

The damping characteristics of metal alloys and metal matrix composites are relevant to the automotive, aerospace, and marine structures. Use of lightweight materials can help in increasing payload capacity and in decreasing fuel consumption. Lightweight composite materials possessing high damping capabilities that can be designed as structural members can greatly benefit in addressing these needs. In this context, the damping properties of lightweight metals such as aluminum and magnesium and their respective composites have been studied in the existing literature. This review focuses on analyzing the damping properties of aluminum and magnesium alloys and their cellular composites. The damping properties of various lightweight alloys and composites are compared on the basis of their density to understand the potential for weight saving in structural applications. Magnesium alloys are observed to possess better damping properties in comparison to aluminum. However, aluminum matrix syntactic foams reinforced with silicon carbide hollow particles possess a damping capacity and density comparable to magnesium alloy. By using the data presented in the study, composites with specific compositions and properties can be selected for a given application. In addition, the comparison of the results helps in identifying the areas where attention needs to be focused to address the future needs.

The ionization efficiency of aluminum and iron at meteoric velocities

NASA Astrophysics Data System (ADS)

DeLuca, Michael; Munsat, Tobin; Thomas, Evan; Sternovsky, Zoltan

2018-07-01

The ionization efficiency of aluminum was measured in the laboratory over an extended velocity range of 10.8-73.4 km/s and compared to available models. The measurements were made by shooting submicron-sized aluminum dust particles into an air chamber using the University of Colorado's dust accelerator facility. The ionization efficiency, β, is calculated from the total charge generated in the chamber during the complete ablation of particles of known mass. An array of photomultiplier tubes observed the light production by a subset of particles in the chamber to confirm that a moderate deceleration of the ablating particles occurred at low velocities. This information allows the interpretation of the β measurements to be extended to velocities <20 km/s, with the understanding that the low-velocity β measurements are lower limits. Updated β measurements for iron particles are also reported over an extended velocity range compared to previously published data: 10.5-87.3 km/s. The measurements are fit to functions for the ionization efficiency across the entire velocity range, and a semi-empirical function is presented which matches the shape of the measured β curves for aluminum and iron at both high and low velocities.

GTA welding and heat treating of high purity aluminum. [-452/sup 0/F

DOE Office of Scientific and Technical Information (OSTI.GOV)

Voigt, R.C.; Loper, C.R. Jr.

1979-01-01

Gas tungsten arc welding is a suitable way to join high purity aluminum with only small increases in the electrical resistivity at 4.2 K (i.e., -269 C or -452 F) if proper welding procedures are used. High purity aluminum weld zone properties, useful for the design of cryogenic superconducting devices, are now available. The additional electrical resistivity caused by welding is independent of original base metal resistivity and can be decreased significantly by heat treatments as low as 260 C (500 F) for 30 minutes. Tungsten contamination caused from welding is small (on the order of 0.2 ppM) but itmore » is a significant contribution to weld zone resistivity. This suggests that other welding techniques such as laser welding or electron beam welding may be successful alternatives. Additional GTA welding tests for various welding conditions and welding procedures would lead to a greater understanding of the tungsten emission levels during welding. Perturbations during GTA welding such as electrode spitting or electrode contact with the weld metal must be eliminated to successfully weld high purity aluminum. Improper welding techniques causing arc instabilities, for any reason, cause highly resistive welds that must be properly repaired.« less

Ecological implications of behavioural syndromes.

PubMed

Sih, Andrew; Cote, Julien; Evans, Mara; Fogarty, Sean; Pruitt, Jonathan

2012-03-01

Interspecific trait variation has long served as a conceptual foundation for our understanding of ecological patterns and dynamics. In particular, ecologists recognise the important role that animal behaviour plays in shaping ecological processes. An emerging area of interest in animal behaviour, the study of behavioural syndromes (animal personalities) considers how limited behavioural plasticity, as well as behavioural correlations affects an individual's fitness in diverse ecological contexts. In this article we explore how insights from the concept and study of behavioural syndromes provide fresh understanding of major issues in population ecology. We identify several general mechanisms for how population ecology phenomena can be influenced by a species or population's average behavioural type, by within-species variation in behavioural type, or by behavioural correlations across time or across ecological contexts. We note, in particular, the importance of behavioural type-dependent dispersal in spatial ecology. We then review recent literature and provide new syntheses for how these general mechanisms produce novel insights on five major issues in population ecology: (1) limits to species' distribution and abundance; (2) species interactions; (3) population dynamics; (4) relative responses to human-induced rapid environmental change; and (5) ecological invasions. © 2012 Blackwell Publishing Ltd/CNRS.

Behavioural informatics for improving water hygiene practice based on IoT environment.

PubMed

Fu, Yang; Wu, Wenyan

2018-02-01

The development of Internet of Things (IoT) and latest Information and Communication Technologies (ICT) have changed the nature of healthcare monitoring and health behaviour intervention in many applications. Water hygiene and water conservation behaviour intervention as important influence factors to human health are gaining much attentions for improving sustained sanitation practice. Based on face-to-face delivery, typical behaviour intervention method is costly and hardly to provide all day access to personalised intervention guidance and feedbacks. In this study, we presented a behavioural information system and water use behaviour model using IoT platform. Using Expanded Theory of Planned Behaviour (ETPB) and adopted structure equation model, this study offers a solution for understanding the behaviour intervention mechanism and methodology for developing empirical model. A case study of behaviour intervention model is presented by utilising residential water conservation behaviour data collected in China. Results suggested that cultural differences have significant influences on the understanding of intervention drivers, promoting projects and increasing awareness, which could improve the behaviour intervention efficiency and further facilitate the improvement of water hygiene practice. The performance evaluation of water saving dimension is discussed as well in the paper. Copyright © 2017 Elsevier Inc. All rights reserved.

Constraining Distributed Catchment Models by Incorporating Perceptual Understanding of Spatial Hydrologic Behaviour

NASA Astrophysics Data System (ADS)

Hutton, Christopher; Wagener, Thorsten; Freer, Jim; Han, Dawei

2016-04-01

Distributed models offer the potential to resolve catchment systems in more detail, and therefore simulate the hydrological impacts of spatial changes in catchment forcing (e.g. landscape change). Such models tend to contain a large number of poorly defined and spatially varying model parameters which are therefore computationally expensive to calibrate. Insufficient data can result in model parameter and structural equifinality, particularly when calibration is reliant on catchment outlet discharge behaviour alone. Evaluating spatial patterns of internal hydrological behaviour has the potential to reveal simulations that, whilst consistent with measured outlet discharge, are qualitatively dissimilar to our perceptual understanding of how the system should behave. We argue that such understanding, which may be derived from stakeholder knowledge across different catchments for certain process dynamics, is a valuable source of information to help reject non-behavioural models, and therefore identify feasible model structures and parameters. The challenge, however, is to convert different sources of often qualitative and/or semi-qualitative information into robust quantitative constraints of model states and fluxes, and combine these sources of information together to reject models within an efficient calibration framework. Here we present the development of a framework to incorporate different sources of data to efficiently calibrate distributed catchment models. For each source of information, an interval or inequality is used to define the behaviour of the catchment system. These intervals are then combined to produce a hyper-volume in state space, which is used to identify behavioural models. We apply the methodology to calibrate the Penn State Integrated Hydrological Model (PIHM) at the Wye catchment, Plynlimon, UK. Outlet discharge behaviour is successfully simulated when perceptual understanding of relative groundwater levels between lowland peat, upland peat and valley slopes within the catchment are used to identify behavioural models. The process of converting qualitative information into quantitative constraints forces us to evaluate the assumptions behind our perceptual understanding in order to derive robust constraints, and therefore fairly reject models and avoid type II errors. Likewise, consideration needs to be given to the commensurability problem when mapping perceptual understanding to constrain model states.

Discourses on Behaviour: A Role for Restorative Justice?

ERIC Educational Resources Information Center

Harold, Victoria L.; Corcoran, Tim

2013-01-01

The description and management of difficult behaviour in schools has interested educational practitioners and researchers worldwide, including in the UK. Concerns have been raised about the use and implications of more dominant discourses, namely those of behaviourism and zero tolerance, for understanding student behaviour. This article presents…

Behavioural aspects of terrorism.

PubMed

Leistedt, Samuel J

2013-05-10

Behavioural and social sciences are useful in collecting and analysing intelligence data, understanding terrorism, and developing strategies to combat terrorism. This article aims to examine the psychopathological concepts of terrorism and discusses the developing roles for behavioural scientists. A systematic review was conducted of studies investigating behavioural aspects of terrorism. These studies were identified by a systematic search of databases, textbooks, and a supplementary manual search of references. Several fundamental concepts were identified that continue to influence the motives and the majority of the behaviours of those who support or engage in this kind of specific violence. Regardless of the psychological aspects and new roles for psychiatrists, the behavioural sciences will continue to be called upon to assist in developing better methods to gather and analyse intelligence, to understand terrorism, and perhaps to stem the radicalisation process. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Modelling the influence of human behaviour on the spread of infectious diseases: a review.

PubMed

Funk, Sebastian; Salathé, Marcel; Jansen, Vincent A A

2010-09-06

Human behaviour plays an important role in the spread of infectious diseases, and understanding the influence of behaviour on the spread of diseases can be key to improving control efforts. While behavioural responses to the spread of a disease have often been reported anecdotally, there has been relatively little systematic investigation into how behavioural changes can affect disease dynamics. Mathematical models for the spread of infectious diseases are an important tool for investigating and quantifying such effects, not least because the spread of a disease among humans is not amenable to direct experimental study. Here, we review recent efforts to incorporate human behaviour into disease models, and propose that such models can be broadly classified according to the type and source of information which individuals are assumed to base their behaviour on, and according to the assumed effects of such behaviour. We highlight recent advances as well as gaps in our understanding of the interplay between infectious disease dynamics and human behaviour, and suggest what kind of data taking efforts would be helpful in filling these gaps.

Modelling the influence of human behaviour on the spread of infectious diseases: a review

PubMed Central

Funk, Sebastian; Salathé, Marcel; Jansen, Vincent A. A.

2010-01-01

Human behaviour plays an important role in the spread of infectious diseases, and understanding the influence of behaviour on the spread of diseases can be key to improving control efforts. While behavioural responses to the spread of a disease have often been reported anecdotally, there has been relatively little systematic investigation into how behavioural changes can affect disease dynamics. Mathematical models for the spread of infectious diseases are an important tool for investigating and quantifying such effects, not least because the spread of a disease among humans is not amenable to direct experimental study. Here, we review recent efforts to incorporate human behaviour into disease models, and propose that such models can be broadly classified according to the type and source of information which individuals are assumed to base their behaviour on, and according to the assumed effects of such behaviour. We highlight recent advances as well as gaps in our understanding of the interplay between infectious disease dynamics and human behaviour, and suggest what kind of data taking efforts would be helpful in filling these gaps. PMID:20504800

CEOS Theory: A Comprehensive Approach to Understanding Hard to Maintain Behaviour Change.

PubMed

Borland, Ron

2017-03-01

This paper provides a brief introduction to CEOS theory, a comprehensive theory for understanding hard to maintain behaviour change. The name CEOS is an acronym for Context, Executive, and Operational Systems theory. Behaviour is theorised to be the result of the moment by moment interaction between internal needs (operational processes) in relation to environmental conditions, and for humans this is augmented by goal-directed, executive action which can transcend immediate contingencies. All behaviour is generated by operational processes. Goal-directed behaviours only triumph over contingency-generated competing behaviours when operational processes have been sufficiently activated to support them. Affective force can be generated around executive system (ES) goals from such things as memories of direct experience, vicarious experience, and emotionally charged communications mediated through stories the person generates. This paper makes some refinements and elaborations of the theory, particularly around the role of feelings, and of the importance of stories and scripts for facilitating executive action. It also sketches out how it reconceptualises a range of issues relevant to behaviour change. CEOS provides a framework for understanding the limitations of both informational and environmental approaches to behaviour change, the need for self-regulatory strategies and for taking into account more basic aspects of human functioning. © 2016 The Authors. Applied Psychology: Health and Well-Being published by John Wiley & Sons Ltd on behalf of International Association of Applied Psychology.

The Reactive Stabilisation of Aluminum-Zinc-X Foams via the Formation of a Transient Liquid Phase Using the Powder Metallurgy Approach

NASA Astrophysics Data System (ADS)

Lafrance, Maxime

During the past few decades, aluminum foam research has focused on the improvement of properties. These properties include pore structure and process reproducibility. High energy absorption capacity, lightweight and high stiffness to weight ratio are some of the properties that make these foams desirable for a number of diverse applications. The use of a transient liquid phase and melting point depressant was studied in order to improve aluminum foam manufactured through the powder metallurgy process and to create reactive Stabilisation. The transient liquid phase reacts with aluminum and helps encapsulate higher levels of hydrogen, simultaneously reducing the difference between the melting point of the alloy and the gas release temperature of the blowing agent (TiH2). A large difference is known to adversely affect foam properties. The study of pure aluminum foam formation was undertaken to understand the basic foaming mechanisms related to crack formations under in-situ conditions. Elemental zinc powder at various concentrations (Al-10wt%Zn, Al-33wt%Zn and Al-50wt%Zn) was added to produce a transient liquid phase. Subsequently, an Al-12wt%Si pre-alloyed powder was added to the Al-Zn mixture in order to further reduce the melting point of the alloy and to increase the amount of transient liquid phase available (Al-3.59wtSi-9.6%Zn and Al-2.4wt%Si-9.7wt%Zn). The mechanical properties of each system at optimal foaming conditions were assessed and compared. It was determined that pure aluminum foam crack formation could be suppressed at higher heating rates, improving the structure through the nucleation of uniform pores. The Al-10wt%Zn foams generated superior pore properties, post maximum expansion stability and mechanical properties at lower temperatures, compared to pure aluminum. The Al-Si-Zn foams revealed remarkable stability and pore structure at very low temperatures (640 to 660°C). Overall, the Al-10wt%Zn and Al-3.59wt%Si-9.6wt%Zn foams offer superior properties compared to pure aluminum.

Physicochemical Properties of Antacids

ERIC Educational Resources Information Center

Hem, Stanley L.

1975-01-01

Describes an experiment designed to develop an understanding of the basic acid neutralization reaction of sodium bicarbonate, calcium carbonate, and aluminum hydroxide gel. Presents a procedure for the determination of reaction rate for an antacid in vitro and provides sample data for this determination. (GS)

Understanding the role of shame and its consequences in female hypersexual behaviours: A pilot study

PubMed Central

DHUFFAR, MANPREET K.; GRIFFITHS, MARK D.

2014-01-01

Background and aims: Hypersexuality and sexual addiction among females is a little understudied phenomenon. Shame is thought to be intrinsic to hypersexual behaviours, especially in women. Therefore, the aim of this study was to understand both hypersexual behaviours and consequences of hypersexual behaviours and their respective contributions to shame in a British sample of females (n = 102). Methods: Data were collected online via Survey Monkey. Results: Results showed the Sexual Behaviour History (SBH) and the Hypersexual Disorder Questionnaire (HDQ) had significant positive correlation with scores on the Shame Inventory. The results indicated that hypersexual behaviours were able to predict a small percentage of the variability in shame once sexual orientation (heterosexual vs. non-heterosexual) and religious beliefs (belief vs. no belief) were controlled for. Results also showed there was no evidence that religious affiliation and/or religious beliefs had an influence on the levels of hypersexuality and consequences of sexual behaviours as predictors of shame. Conclusions: While women in the UK are rapidly shifting to a feminist way of thinking with or without technology, hypersexual disorder may often be misdiagnosed and misunderstood because of the lack of understanding and how it is conceptualised. The implications of these findings are discussed. PMID:25592308

Children's Language and Behavioural, Social and Emotional Difficulties and Prosocial Behaviour during the Toddler Years and at School Entry

ERIC Educational Resources Information Center

Hartas, Dimitra

2011-01-01

The ability of young children to manage their emotions and behaviours is an important prerequisite for social adjustment and school readiness. With an increase in early-onset behavioural difficulties in children, understanding changes in child behaviour during the preschool years and the factors that influence it is a priority for policy and…

Adolescent understanding of DOHaD concepts: a school-based intervention to support knowledge translation and behaviour change.

PubMed

Bay, J L; Mora, H A; Sloboda, D M; Morton, S M; Vickers, M H; Gluckman, P D

2012-12-01

A life-course approach to reduction of risk of non-communicable diseases (NCD) suggests that early-life interventions may be more effective than lifestyle modifications in middle age. Knowledge translation to develop understanding of the Developmental Origins of Health and Disease (DOHaD) within the community offers the potential to encourage informed diet and lifestyle choices supporting reduction of NCD risk in current and future generations. Many women do not make sustained dietary change before or during pregnancy, therefore appropriate nutritional behaviours need to be established prior to adulthood. This makes adolescence an appropriate stage for interventions to establish suitable dietary and lifestyle behaviours. Therefore, we engaged adolescents in a school-based educational intervention, and assessed the value of this in development of understanding of DOHaD concepts to support behaviour change that could lead to NCD risk reduction in the next generation. Modules of course work were written for 11-14 year olds and trialled in nine schools. Matched pre- and post-intervention questionnaire responses from 238 students and 99 parents, and post-intervention interviews evaluated the intervention. Understanding of a link between maternal diet during pregnancy and the health of the foetus in adulthood increased from 46% to 76% following intervention. Post-intervention evidence suggests the programme facilitated discussion of diet, lifestyle and DOHaD concepts in most families. The intervention was effective in improving understanding of DOHaD concepts and in some cases led to appropriate behaviour change. However, the sustainability of these changes remains to be determined through on-going evaluation of attitudes and behaviour within this cohort.

How School Staff Understand the Relationship between Problem Behaviours and Language Difficulties

ERIC Educational Resources Information Center

Ramsay, Janet; Cowell, Naina; Gersch, Irvine

2018-01-01

This exploratory study adopted a mixed methods methodology, a critical realist ontological stance and a constructionist epistemological position to consider how special educational needs coordinators and pastoral managers in mainstream high schools understand the relationship between problem behaviours and language development. Semi-structured…

A psychosocial analysis of parents' decisions for limiting their young child's screen time: An examination of attitudes, social norms and roles, and control perceptions.

PubMed

Hamilton, Kyra; Spinks, Teagan; White, Katherine M; Kavanagh, David J; Walsh, Anne M

2016-05-01

Preschool-aged children spend substantial amounts of time engaged in screen-based activities. As parents have considerable control over their child's health behaviours during the younger years, it is important to understand those influences that guide parents' decisions about their child's screen time behaviours. A prospective design with two waves of data collection, 1 week apart, was adopted. Parents (n = 207) completed a Theory of Planned Behaviour (TPB)-based questionnaire, with the addition of parental role construction (i.e., parents' expectations and beliefs of responsibility for their child's behaviour) and past behaviour. A number of underlying beliefs identified in a prior pilot study were also assessed. The model explained 77% (with past behaviour accounting for 5%) of the variance in intention and 50% (with past behaviour accounting for 3%) of the variance in parental decisions to limit child screen time. Attitude, subjective norms, perceived behavioural control, parental role construction, and past behaviour predicted intentions, and intentions and past behaviour predicted follow-up behaviour. Underlying screen time beliefs (e.g., increased parental distress, pressure from friends, inconvenience) were also identified as guiding parents' decisions. Results support the TPB and highlight the importance of beliefs for understanding parental decisions for children's screen time behaviours, as well as the addition of parental role construction. This formative research provides necessary depth of understanding of sedentary lifestyle behaviours in young children which can be adopted in future interventions to test the efficacy of the TPB mechanisms in changing parental behaviour for their child's health. What is already known on this subject? Identifying determinants of child screen time behaviour is vital to the health of young people. Social-cognitive and parental role constructions are key influences of parental decision-making. Little is known about the processes guiding parents' decisions to limit their child's screen time. What does this study add? Parental role construction and TPB social-cognitive factors influence parental decisions. The beliefs of parents for their child's behaviour were identified. A range of beliefs guide parents' decisions for their child's screen time viewing. © 2015 The British Psychological Society.

Quantification and micron-scale imaging of spatial distribution of trace beryllium in shrapnel fragments and metallurgic samples with correlative fluorescence detection method and secondary ion mass spectrometry (SIMS)

PubMed Central

Abraham, Jerrold L.; Chandra, Subhash; Agrawal, Anoop

2014-01-01

Recently, a report raised the possibility of shrapnel-induced chronic beryllium disease (CBD) from long-term exposure to the surface of retained aluminum shrapnel fragments in the body. Since the shrapnel fragments contained trace beryllium, methodological developments were needed for beryllium quantification and to study its spatial distribution in relation to other matrix elements, such as aluminum and iron, in metallurgic samples. In this work, we developed methodology for quantification of trace beryllium in samples of shrapnel fragments and other metallurgic sample-types with main matrix of aluminum (aluminum cans from soda, beer, carbonated water, and aluminum foil). Sample preparation procedures were developed for dissolving beryllium for its quantification with the fluorescence detection method for homogenized measurements. The spatial distribution of trace beryllium on the sample surface and in 3D was imaged with a dynamic secondary ion mass spectrometry (SIMS) instrument, CAMECA IMS 3f SIMS ion microscope. The beryllium content of shrapnel (~100 ppb) was the same as the trace quantities of beryllium found in aluminum cans. The beryllium content of aluminum foil (~25 ppb) was significantly lower than cans. SIMS imaging analysis revealed beryllium to be distributed in the form of low micron-sized particles and clusters distributed randomly in X-Y-and Z dimensions, and often in association with iron, in the main aluminum matrix of cans. These observations indicate a plausible formation of Be-Fe or Al-Be alloy in the matrix of cans. Further observations were made on fluids (carbonated water) for understanding if trace beryllium in cans leached out and contaminated the food product. A direct comparison of carbonated water in aluminum cans and plastic bottles revealed that beryllium was below the detection limits of the fluorescence detection method (~0.01 ppb). These observations indicate that beryllium present in aluminum matrix was either present in an immobile form or its mobilization into the food product was prevented by a polymer coating on the inside of cans, a practice used in food industry to prevent contamination of food products. The lack of such coating in retained shrapnel fragments renders their surface a possible source of contamination for long-term exposure of tissues and fluids and induction of disease, as characterized in a recent study. Methodological developments reported here can be extended to studies of beryllium in electronics devices and components. PMID:25146877

Quantification and micron-scale imaging of spatial distribution of trace beryllium in shrapnel fragments and metallurgic samples with correlative fluorescence detection method and secondary ion mass spectrometry (SIMS).

PubMed

Abraham, J L; Chandra, S; Agrawal, A

2014-11-01

Recently, a report raised the possibility of shrapnel-induced chronic beryllium disease from long-term exposure to the surface of retained aluminum shrapnel fragments in the body. Since the shrapnel fragments contained trace beryllium, methodological developments were needed for beryllium quantification and to study its spatial distribution in relation to other matrix elements, such as aluminum and iron, in metallurgic samples. In this work, we developed methodology for quantification of trace beryllium in samples of shrapnel fragments and other metallurgic sample-types with main matrix of aluminum (aluminum cans from soda, beer, carbonated water and aluminum foil). Sample preparation procedures were developed for dissolving beryllium for its quantification with the fluorescence detection method for homogenized measurements. The spatial distribution of trace beryllium on the sample surface and in 3D was imaged with a dynamic secondary ion mass spectrometry instrument, CAMECA IMS 3f secondary ion mass spectrometry ion microscope. The beryllium content of shrapnel (∼100 ppb) was the same as the trace quantities of beryllium found in aluminum cans. The beryllium content of aluminum foil (∼25 ppb) was significantly lower than cans. SIMS imaging analysis revealed beryllium to be distributed in the form of low micron-sized particles and clusters distributed randomly in X-Y- and Z dimensions, and often in association with iron, in the main aluminum matrix of cans. These observations indicate a plausible formation of Be-Fe or Al-Be alloy in the matrix of cans. Further observations were made on fluids (carbonated water) for understanding if trace beryllium in cans leached out and contaminated the food product. A direct comparison of carbonated water in aluminum cans and plastic bottles revealed that beryllium was below the detection limits of the fluorescence detection method (∼0.01 ppb). These observations indicate that beryllium present in aluminum matrix was either present in an immobile form or its mobilization into the food product was prevented by a polymer coating on the inside of cans, a practice used in food industry to prevent contamination of food products. The lack of such coating in retained shrapnel fragments renders their surface a possible source of contamination for long-term exposure of tissues and fluids and induction of disease, as characterized in a recent study. Methodological developments reported here can be extended to studies of beryllium in electronics devices and components. © 2014 The Authors Journal of Microscopy © 2014 Royal Microscopical Society.

Thinking styles and doctors' knowledge and behaviours relating to acute coronary syndromes guidelines

PubMed Central

Sladek, Ruth M; Bond, Malcolm J; Huynh, Luan T; Chew, Derek PB; Phillips, Paddy A

2008-01-01

Background How humans think and make decisions is important in understanding behaviour. Hence an understanding of cognitive processes among physicians may inform our understanding of behaviour in relation to evidence implementation strategies. A personality theory, Cognitive-Experiential Self Theory (CEST) proposes a relationship between different ways of thinking and behaviour, and articulates pathways for behaviour change. However prior to the empirical testing of interventions based on CEST, it is first necessary to demonstrate its suitability among a sample of healthcare workers. Objectives To investigate the relationship between thinking styles and the knowledge and clinical practices of doctors directly involved in the management of acute coronary syndromes. Methods Self-reported doctors' thinking styles (N = 74) were correlated with results from a survey investigating knowledge, attitudes, and clinical practice, and evaluated against recently published acute coronary syndrome clinical guidelines. Results Guideline-discordant practice was associated with an experiential style of thinking. Conversely, guideline-concordant practice was associated with a higher preference for a rational style of reasoning. Conclusion Findings support that while guidelines might be necessary to communicate evidence, other strategies may be necessary to target discordant behaviours. Further research designed to examine the relationships found in the current study is required. PMID:18439250

[Behavioural phenotypes in Prader-Willi syndrome].

PubMed

Rosell-Raga, L

2003-02-01

The behavioural phenotype of Prader-Willi syndrome (PWS) is defined by a neurological profile and a characteristic pattern of behavioural disorders which include cognitive deficits, learning difficulties and behavioural problems, which increase with age, both in number and gravity. We review the behavioural phenotype of the cases of PWS in the Valencian Community, together with their peculiar behaviours, and analyse how these generate family and social problems. The description of a peculiar behaviour opens up new horizons when understanding and treating PWS, both from a pharmacological and neuropsychological perspective.

Host behaviour-parasite feedback: an essential link between animal behaviour and disease ecology.

PubMed

Ezenwa, Vanessa O; Archie, Elizabeth A; Craft, Meggan E; Hawley, Dana M; Martin, Lynn B; Moore, Janice; White, Lauren

2016-04-13

Animal behaviour and the ecology and evolution of parasites are inextricably linked. For this reason, animal behaviourists and disease ecologists have been interested in the intersection of their respective fields for decades. Despite this interest, most research at the behaviour-disease interface focuses either on how host behaviour affects parasites or how parasites affect behaviour, with little overlap between the two. Yet, the majority of interactions between hosts and parasites are probably reciprocal, such that host behaviour feeds back on parasites and vice versa. Explicitly considering these feedbacks is essential for understanding the complex connections between animal behaviour and parasite ecology and evolution. To illustrate this point, we discuss how host behaviour-parasite feedbacks might operate and explore the consequences of feedback for studies of animal behaviour and parasites. For example, ignoring the feedback of host social structure on parasite dynamics can limit the accuracy of predictions about parasite spread. Likewise, considering feedback in studies of parasites and animal personalities may provide unique insight about the maintenance of variation in personality types. Finally, applying the feedback concept to links between host behaviour and beneficial, rather than pathogenic, microbes may shed new light on transitions between mutualism and parasitism. More generally, accounting for host behaviour-parasite feedbacks can help identify critical gaps in our understanding of how key host behaviours and parasite traits evolve and are maintained. © 2016 The Author(s).

Mediation, moderation, and context: Understanding complex relations among cognition, affect, and health behaviour.

PubMed

Kiviniemi, Marc T; Ellis, Erin M; Hall, Marissa G; Moss, Jennifer L; Lillie, Sarah E; Brewer, Noel T; Klein, William M P

2018-01-01

Researchers have historically treated cognition and affect as separate constructs in motivating health behaviour. We present a framework and empirical evidence for complex relations between cognition and affect in predicting health behaviour. Main Outcome, Design and Results: First, affect and cognition can mediate each other's relation to health behaviour. Second, affect and cognition can moderate the other's impact. Third, context can change the interplay of affect and cognition. Fourth, affect and cognition may be indelibly fused in some psychological constructs (e.g. worry, anticipated regret and reactance). These four propositions in our framework are not mutually exclusive. Examination of the types of complex relations described here can benefit theory development, empirical testing of theories and intervention design. Doing so will advance the understanding of mechanisms involved in regulation of health behaviours and the effectiveness of interventions to change health behaviours.

Genetics of impulsive behaviour

PubMed Central

Bevilacqua, Laura; Goldman, David

2013-01-01

Impulsivity, defined as the tendency to act without foresight, comprises a multitude of constructs and is associated with a variety of psychiatric disorders. Dissecting different aspects of impulsive behaviour and relating these to specific neurobiological circuits would improve our understanding of the etiology of complex behaviours for which impulsivity is key, and advance genetic studies in this behavioural domain. In this review, we will discuss the heritability of some impulsivity constructs and their possible use as endophenotypes (heritable, disease-associated intermediate phenotypes). Several functional genetic variants associated with impulsive behaviour have been identified by the candidate gene approach and re-sequencing, and whole genome strategies can be implemented for discovery of novel rare and common alleles influencing impulsivity. Via deep sequencing an uncommon HTR2B stop codon, common in one population, was discovered, with implications for understanding impulsive behaviour in both humans and rodents and for future gene discovery. PMID:23440466

[Psychiatry and Biopolitics in context of war: Understanding conflict to build the post-conflict].

PubMed

Corzo Pérez, Paula Ariadna

The purpose of this document is to present a review on biopolitics and psychiatry in the context of war, considering that this is where the greatest number of altered and deviant behaviours is generated. Along this line, as it is not about the psychopathology, but of its behaviour, of the approaches of Michel Foucault as regards the relationships of power, as such that it allows introducing the reader to a new perspective of thinking and understanding of the elements that have given rise to the maintenance of violent behaviour patterns and of the war itself. It tries to show the reader a different approach in which it is proposed that psychiatry can be actively involved in mitigation of all those schemes that ingrained the violence that have contributed to the perpetuation of war in modern society. Considering traditional approaches created to define human behaviour and mental illness only represented by a Disease code (ICD/DSM) are not sufficient to understand them. It induces the reader to reflect using practical examples that allows them to visualize, through a hypothetical scenario, elements of biopolitics that influence the behaviour, and the role of power relationships in the dynamics of population, particularly those who have grown up in circumstances of vulnerability and violence, and showing how psychiatry faces the points raised by biopolitics. That is why understanding this topic is necessary to help change behaviour and those patterns that help maintain behaviours that lead to violence and war itself. It is about re-thinking human behaviour as a result of a cultural and bio-political context that determines in the individual a way of acting, that regardless of the point in history or the place where you are, it is established as their usually form of behaviour in the struggle to survival. Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

The psychobiology of aggression and violence: bioethical implications.

PubMed

Díaz, José Luis

2010-01-01

Bioethics is concerned with the moral aspects of biology and medicine. The bioethical relevance of aggression and violence is clear, as very different moral and legal responsibilities may apply depending on whether aggression and violence are forms of behaviour that are innate or acquired, deliberate or automatic or not, or understandable and justifiable based on causes. Biological research and natural science theories are a basic ingredient for reflections, arguments and decisions on such matters. This study presents the problem of the causes of aggressive behaviour, the evolutionary understanding and definition of aggressive behaviour, the biological basis for this behaviour and the link between emotions and aggression. A growing body of evidence suggests that innate factors of behaviour (be they genetic or neurobiological) do not by themselves define behaviour and nor do acquired factors such as learning, cultural norms or worldviews. Both types of factor interact from the outset to shape a development process that mutually interacts to define beliefs or behaviour.

Developing a taxonomy of coordination behaviours in nuclear power plant control rooms during emergencies.

PubMed

Wang, Dunxing; Gao, Qin; Li, Zhizhong; Song, Fei; Ma, Liang

2017-12-01

This study aims to develop a taxonomy of coordination behaviours during emergencies in nuclear power plants (NPPs). We summarised basic coordination behaviours from literature in aviation, health care and nuclear field and identified coordination behaviours specific to the nuclear domain by interviewing and surveying control crew operators. The established taxonomy includes 7 workflow stages and 24 basic coordination behaviours. To evaluate the reliability and feasibility of the taxonomy, we analysed 12 videos of operators' training sessions by coding coordination behaviours with the taxonomy and the inter-rater reliability was acceptable. Further analysis of the frequency, the duration and the direction of the coordination behaviours revealed four coordination problems. This taxonomy provides a foundation of systematic observation of coordination behaviours among NPP crews, advances researchers' understanding of the coordination mechanism during emergencies in NPPs and facilitate the possibility to deepen the understanding of the relationships between coordination behaviours and team performance. Practitioner Summary: A taxonomy of coordination behaviours during emergencies in nuclear power plants was developed. Reliability and feasibility of the taxonomy was verified through the analysis of 12 training sessions. The taxonomy can serve as an observation system for analysis of coordination behaviours and help to identify coordination problems of control crews.

Understanding Pupil Behaviour: Classroom Management Techniques for Teachers

ERIC Educational Resources Information Center

Lewis, Ramon

2009-01-01

This book describes a system of successful classroom behaviour management techniques developed by the author over more than twenty-five years. It outlines the difficulties confronting teachers trying to manage pupils' misbehaviour in schools and describes four types of pupil who can be helped to behave responsibly. In "Understanding Pupil…

Material Property Database and Environmental Attribute Models for NM Science Research

DTIC Science & Technology

2011-03-28

3 Goals 1. Provide place "to go " for initial information 2. Basic understanding of what types of information you might need to... MWCNT , SWCNT, Fullerene, Waste • Aluminum ...,. Explosive, propellant • Silver ...,. Coatings, textiles, polymers • Titanium dioxide

Characteristics of Challenging Behaviours in Adults with Autistic Disorder, PDD-NOS, and Intellectual Disability

ERIC Educational Resources Information Center

Matson, Johnny L.; Rivet, Tessa T.

2008-01-01

Background: Challenging behaviours are frequently a problem for people with autism spectrum disorders (ASD) and intellectual disability (ID). A better understanding of which individuals display which behaviours, at what rates, and the relationship of these behaviours to comorbid psychopathology would have important implications. Method: A group of…

The Importance of Indirect Teaching Behaviour and Its Educational Effects in Physical Education

ERIC Educational Resources Information Center

Jung, Hyunwoo; Choi, Euichang

2016-01-01

Background: Physical education teacher behaviour has been a subject of study in physical education including physical education teacher education for 30 years. However, the research on teacher behaviour has tended to focus on direct teaching behaviour (DTB) to demonstrate the benefits of effective teaching, centred on a technical understanding of…

Measurement of Restricted and Repetitive Behaviour in Children with Autism Spectrum Disorder: Selecting a Questionnaire or Interview

ERIC Educational Resources Information Center

Honey, Emma; Rodgers, Jacqui; McConachie, Helen

2012-01-01

Assessment of children's restricted and repetitive behaviours offers potential opportunities to improve early diagnosis of autism spectrum disorder (ASD) and timely access to interventions and support. To facilitate this requires understanding of the phenomenology of repetitive behaviours in ASD, including differentiating behaviours seen in ASD…

Understanding the Causes and Management of Problem Behaviour in Zimbabwean Schools: Teacher Perceptions

ERIC Educational Resources Information Center

Chitiyo, Morgan; Chitiyo, George; Chitiyo, Jonathan; Oyedele, Victoria; Makoni, Richard; Fonnah, Davidson; Chipangure, Luke

2014-01-01

Problem behaviour continues to present a challenge for school-teachers worldwide. Since school-teachers around the globe have different conceptualisations of what constitutes problem behaviour, the purpose of this study was to examine the perceptions of Zimbabwean school-teachers about their perceived causes of problem behaviour among students in…

Self-Regulation: Relations with Theory of Mind and Social Behaviour

ERIC Educational Resources Information Center

Korucu, Irem; Selcuk, Bilge; Harma, Mehmet

2017-01-01

It is argued that self-regulation skill is necessary both for displaying constructive behaviour and for controlling negative social behaviour, and self-regulation might affect social behaviours by increasing the ability to understand others' minds. In this research, in order to examine different aspects of self-regulation and their similarities…

An optical technique to measure distortion in heat-treated parts in-situ

NASA Astrophysics Data System (ADS)

Sciammarella, Federico; Nash, Phillip

2005-05-01

Improvements in the properties of aluminum alloys have made them more popular for structural applications. Using the different heat treatments that are available, aluminum alloys can have a wide variation in properties for different types of applications. The appropriate heat treatments of these alloys are vital in providing the properties needed for their particular applications. Moreover, understanding the effects of heat treatments that may cause distortion to a part is critical. Most of the work carried out in this field is in the form of pre- and post-treatment analysis of a part. In this study, in-situ measurements of the distortions that a heat-treated part undergoes when subjected to rapid heating to temperatures near melting followed by slow cooling were carried out. A numerical model was built to simulate the experiment and the results are compared. This study will provide much-needed insight into the complex occurrences that aluminum parts undergo during heat treatment.

3D Modeling of Ultrasonic Wave Interaction with Disbonds and Weak Bonds

NASA Technical Reports Server (NTRS)

Leckey, C.; Hinders, M.

2011-01-01

Ultrasonic techniques, such as the use of guided waves, can be ideal for finding damage in the plate and pipe-like structures used in aerospace applications. However, the interaction of waves with real flaw types and geometries can lead to experimental signals that are difficult to interpret. 3-dimensional (3D) elastic wave simulations can be a powerful tool in understanding the complicated wave scattering involved in flaw detection and for optimizing experimental techniques. We have developed and implemented parallel 3D elastodynamic finite integration technique (3D EFIT) code to investigate Lamb wave scattering from realistic flaws. This paper discusses simulation results for an aluminum-aluminum diffusion disbond and an aluminum-epoxy disbond and compares results from the disbond case to the common artificial flaw type of a flat-bottom hole. The paper also discusses the potential for extending the 3D EFIT equations to incorporate physics-based weak bond models for simulating wave scattering from weak adhesive bonds.

Oncologic photodynamic diagnosis and therapy: confocal Raman/fluorescence imaging of metal phthalocyanines in human breast cancer tissue in vitro.

PubMed

Abramczyk, Halina; Brozek-Pluska, Beata; Surmacki, Jakub; Musial, Jacek; Kordek, Radzislaw

2014-11-07

Raman microspectroscopy and confocal Raman imaging combined with confocal fluorescence were used to study the distribution and aggregation of aluminum tetrasulfonated phthalocyanine (AlPcS4) in noncancerous and cancerous breast tissues. The results demonstrate the ability of Raman spectroscopy to distinguish between noncancerous and cancerous human breast tissue and to identify differences in the distribution and aggregation of aluminum phthalocyanine, which is a potential photosensitizer in photodynamic therapy (PDT), photodynamic diagnosis (PDD) and photoimmunotherapy (PIT) of cancer. We have observed that the distribution of aluminum tetrasulfonated phthalocyanine confined in cancerous tissue is markedly different from that in noncancerous tissue. We have concluded that Raman imaging can be treated as a new and powerful technique useful in cancer photodynamic therapy, increasing our understanding of the mechanisms and efficiency of photosensitizers by better monitoring localization in cancer cells as well as the clinical assessment of the therapeutic effects of PDT and PIT.

Computer Tomography 3-D Imaging of the Metal Deformation Flow Path in Friction Stir Welding

NASA Technical Reports Server (NTRS)

Schneider, Judy; Beshears, Ronald; Nunes, Arthur C., Jr.

2004-01-01

In friction stir welding, a rotating threaded pin tool is inserted into a weld seam and literally stirs the edges of the seam together. This solid-state technique has been successfully used in the joining of materials that are difficult to fusion weld such as aluminum alloys. To determine optimal processing parameters for producing a defect free weld, a better understanding of the resulting metal deformation flow path is required. Marker studies are the principal method of studying the metal deformation flow path around the FSW pin tool. In our study, we have used computed tomography (CT) scans to reveal the flow pattern of a lead wire embedded in a FSW weld seam. At the welding temperature of aluminum, the lead becomes molten and thus tracks the aluminum deformation flow paths in a unique 3-dimensional manner. CT scanning is a convenient and comprehensive way of collecting and displaying tracer data. It marks an advance over previous more tedious and ambiguous radiographic/metallographic data collection methods.

Ethnographic methods for process evaluations of complex health behaviour interventions.

PubMed

Morgan-Trimmer, Sarah; Wood, Fiona

2016-05-04

This article outlines the contribution that ethnography could make to process evaluations for trials of complex health-behaviour interventions. Process evaluations are increasingly used to examine how health-behaviour interventions operate to produce outcomes and often employ qualitative methods to do this. Ethnography shares commonalities with the qualitative methods currently used in health-behaviour evaluations but has a distinctive approach over and above these methods. It is an overlooked methodology in trials of complex health-behaviour interventions that has much to contribute to the understanding of how interventions work. These benefits are discussed here with respect to three strengths of ethnographic methodology: (1) producing valid data, (2) understanding data within social contexts, and (3) building theory productively. The limitations of ethnography within the context of process evaluations are also discussed.

True-slime-mould-inspired hydrostatically coupled oscillator system exhibiting versatile behaviours.

PubMed

Umedachi, Takuya; Idei, Ryo; Ito, Kentaro; Ishiguro, Akio

2013-09-01

Behavioural diversity is an indispensable attribute of living systems, which makes them intrinsically adaptive and responsive to the demands of a dynamically changing environment. In contrast, conventional engineering approaches struggle to suppress behavioural diversity in artificial systems to reach optimal performance in given environments for desired tasks. The goals of this research include understanding the essential mechanism that endows living systems with behavioural diversity and implementing the mechanism in robots to exhibit adaptive behaviours. For this purpose, we have focused on an amoeba-like unicellular organism: the plasmodium of true slime mould. Despite the absence of a central nervous system, the plasmodium exhibits versatile spatiotemporal oscillatory patterns and switches spontaneously among these patterns. By exploiting this behavioural diversity, it is able to exhibit adaptive behaviour according to the situation encountered. Inspired by this organism, we built a real physical robot using hydrostatically coupled oscillators that produce versatile oscillatory patterns and spontaneous transitions among the patterns. The experimental results show that exploiting physical hydrostatic interplay—the physical dynamics of the robot—allows simple phase oscillators to promote versatile behaviours. The results can contribute to an understanding of how a living system generates versatile and adaptive behaviours with physical interplays among body parts.

Glassy-State Stabilization of a Dominant Negative Inhibitor Anthrax Vaccine Containing Aluminum Hydroxide and Glycopyranoside Lipid A Adjuvants

PubMed Central

Hassett, Kimberly J.; Vance, David J.; Jain, Nishant K.; Sahni, Neha; Rabia, Lilia A.; Cousins, Megan C.; Joshi, Sangeeta; Volkin, David B.; Middaugh, Russell; Mantis, Nicholas J.; Carpenter, John F.; Randolph, Theodore W.

2014-01-01

During transport and storage, vaccines may be exposed to temperatures outside of the range recommended for storage, potentially causing efficacy losses. To better understand and prevent such losses, Dominant Negative Inhibitor (DNI), a recombinant protein antigen for a candidate vaccine against anthrax, was formulated as a liquid and as a glassy lyophilized powder with the adjuvants aluminum hydroxide and glycopyranoside lipid A (GLA). Freeze-thawing of the liquid vaccine caused the adjuvants to aggregate and decreased its immunogenicity in mice. Immunogenicity of liquid vaccines also decreased when stored at 40 °C for 8 weeks, as measured by decreases in neutralizing antibody titers in vaccinated mice. Concomitant with efficacy losses at elevated temperatures, changes in DNI structure were detected by fluorescence spectroscopy and increased deamidation was observed by capillary isoelectric focusing (cIEF) after only 1 week of storage of the liquid formulation at 40 °C. In contrast, upon lyophilization, no additional deamidation after 4 weeks at 40 °C and no detectable changes in DNI structure or reduction in immunogenicity after 16 weeks at 40 °C was observed. Vaccines containing aluminum hydroxide and GLA elicited higher immune responses than vaccines adjuvanted with only aluminum hydroxide, with more mice responding to a single dose. PMID:25581103

Comparative Investigation on Modal analysis of LM25 Aluminium alloy with other Aluminim alloys using Finite element analysis software

NASA Astrophysics Data System (ADS)

Arunkumar, S.; Baskaralal, V. P. M.; Muthuraman, V.

2017-03-01

The rudimentary steps of the modal analysis and simulation are carried out. The modal analysis is carried out on the different Aluminum Alloys cantilever beam. The cantilever beam is designed in the graphical environment of the ANSYS. The cantilever beam was fine-tuned on one end with all degree of liberation on this end were taken, beam cannot move and rotate. Mode shapes and natural frequencies are premeditated in platforms ANSYS with arithmetical formulation of the direct solver including the block Lanczos method. Aluminum alloys are widely utilized in much application due to their estimable weight to vigor property. Many examination works have been distributed out to make developments the mechanical properties of aluminum alloys. The composition of alloying elements plays a consequential role in deciding the properties of an alloy. In this study a numerical analysis implement i.e., finite element analysis (FEA) is utilized. The work obtainable in this paper is aimed at the study of effect of modal analysis of different aluminum alloys. The modeling and analysis is carried out utilizing ANSYS FEA software. A modal analysis is carried out to understand the modes of frequency demeanor of the material considered. The modal analysis play a vital role in the design of components subjected to high vibration.

Chemical-mechanical planarization of aluminum and copper interconnects with magnetic liners

NASA Astrophysics Data System (ADS)

Wang, Bin

2000-10-01

Chemical Mechanical Planarization (CMP) has been employed to achieve Damascene patterning of aluminum and copper interconnects with unique magnetic liners. A one-step process was developed for each interconnect scheme, using a double-layered pad with mesh cells, pores, and perforations on a top hard layer. In a hydrogen peroxide-based slurry, aluminum CMP was a process of periodic removal and formation of a surface oxide layer. Cu CMP in the same slurry, however, was found to be a dissolution dominant process. In a potassium iodate-based slurry, copper removal was the result of two competing reactions: copper dissolution and a non-native surface layer formation. Guided by electrochemistry, slurries were developed to remove nickel in different regimes of the corrosion kinetics diagram. Nickel CMP in a ferric sulfate-based slurry resulted in periodic removal and formation of a passive surface layer. In a potassium permanganate-based slurry, nickel removal is a dissolution dominant process. Visible Al(Cu) surface damages obtained with copper-doped aluminum could be eliminated by understanding the interactions between the substrate, the pad, and the abrasive agglomerate. Increasing substrate hardness by annealing prior to CMP led to a surface finish free of visible scratches. A similar result was also obtained by preventing formation of abrasive agglomerates and minimizing their contact with the substrate.

Understanding feline emotions: … and their role in problem behaviours.

PubMed

Heath, Sarah

2018-05-01

Practical relevance: Despite its importance, emotional health is a subject that is sadly neglected in the context of companion animals. Understanding emotions is at the heart of veterinary behavioural medicine and is key to preventing, managing and treating reported behavioural problems in domestic cats. Clinical challenges: On a daily basis, veterinary practices are presented with the physical health impact of emotional health and with emotionally motivated behaviours that are undesirable to owners and/or detrimental to the cat. Emotional health is of equal importance to physical health and lies at the very core of veterinary medicine. Clinically, the emotional motivation for a behaviour must be identified before an assessment is made of whether the motivation is contextually appropriate and whether the cat's response is justified and normal, or abnormal in the circumstances. Evidence base: The majority of referenced evidence for our understanding of emotional motivations in mammals has come from the human field, but recently there has been increasing interest in the emotional health of non-human animals and a resulting growth in research. This review draws on the published literature and the author's personal experience to explore how emotions can influence feline behaviours. Global importance: Understanding the importance of emotional health is a major factor in ensuring positive welfare for cats, wherever they are kept as companion animals. It impacts on their physical health and their quality of life, and also on the relationship between cat and owner.

Secondary Aluminum Processing Waste: Baghouse Dust Characterization and Reactivity

EPA Science Inventory

Results presented in this document are of particular importance when trying to understand concerns associated with the disposal of BHD in MSW landfills. The MSW decomposition process is exothermic, creating landfill temperatures that are typically greater than 37° C with the pos...

Anemone-like nanostructures for non-lithographic, reproducible, large-area, and ultra-sensitive SERS substrates

NASA Astrophysics Data System (ADS)

Daglar, Bihter; Demirel, Gokcen Birlik; Khudiyev, Tural; Dogan, Tamer; Tobail, Osama; Altuntas, Sevde; Buyukserin, Fatih; Bayindir, Mehmet

2014-10-01

The melt-infiltration technique enables the fabrication of complex nanostructures for a wide range of applications in optics, electronics, biomaterials, and catalysis. Here, anemone-like nanostructures are produced for the first time under the surface/interface principles of melt-infiltration as a non-lithographic method. Functionalized anodized aluminum oxide (AAO) membranes are used as templates to provide large-area production of nanostructures, and polycarbonate (PC) films are used as active phase materials. In order to understand formation dynamics of anemone-like structures finite element method (FEM) simulations are performed and it is found that wetting behaviour of the polymer is responsible for the formation of cavities at the caps of the structures. These nanostructures are examined in the surface-enhanced-Raman-spectroscopy (SERS) experiment and they exhibit great potential in this field. Reproducible SERS signals are detected with relative standard deviations (RSDs) of 7.2-12.6% for about 10 000 individual spots. SERS measurements are demonstrated at low concentrations of Rhodamine 6G (R6G), even at the picomolar level, with an enhancement factor of ~1011. This high enhancement factor is ascribed to the significant electric field enhancement at the cavities of nanostructures and nanogaps between them, which is supported by finite difference time-domain (FDTD) simulations. These novel nanostructured films can be further optimized to be used in chemical and plasmonic sensors and as a single molecule SERS detection platform.The melt-infiltration technique enables the fabrication of complex nanostructures for a wide range of applications in optics, electronics, biomaterials, and catalysis. Here, anemone-like nanostructures are produced for the first time under the surface/interface principles of melt-infiltration as a non-lithographic method. Functionalized anodized aluminum oxide (AAO) membranes are used as templates to provide large-area production of nanostructures, and polycarbonate (PC) films are used as active phase materials. In order to understand formation dynamics of anemone-like structures finite element method (FEM) simulations are performed and it is found that wetting behaviour of the polymer is responsible for the formation of cavities at the caps of the structures. These nanostructures are examined in the surface-enhanced-Raman-spectroscopy (SERS) experiment and they exhibit great potential in this field. Reproducible SERS signals are detected with relative standard deviations (RSDs) of 7.2-12.6% for about 10 000 individual spots. SERS measurements are demonstrated at low concentrations of Rhodamine 6G (R6G), even at the picomolar level, with an enhancement factor of ~1011. This high enhancement factor is ascribed to the significant electric field enhancement at the cavities of nanostructures and nanogaps between them, which is supported by finite difference time-domain (FDTD) simulations. These novel nanostructured films can be further optimized to be used in chemical and plasmonic sensors and as a single molecule SERS detection platform. Electronic supplementary information (ESI) available: SEM images of the AAO membrane and bare polymer film, FEM simulations of anemone-like polymeric nanopillars depending on the time and pressure, and detailed calculation of the enhancement factor both including experimental and theoretical approaches. See DOI: 10.1039/c4nr03909b

More than Talk: Relations between Emotion Understanding and Positive Behaviour in Toddlers

ERIC Educational Resources Information Center

Ensor, Rosie; Hughes, Claire

2005-01-01

Background. Associations between positive behaviour, emotion understanding and verbal ability have been reported in studies of preschoolers (Cassidy, Werner, Rourke, Zubernis, & Balaraman, 2003), but have yet to be investigated in younger children. Methods. In this study the performance of 36 toddlers (17 boys and 19 girls; mean age = 29…

Plant Adaptation to Acid Soils: The Molecular Basis for Crop Aluminum Resistance.

PubMed

Kochian, Leon V; Piñeros, Miguel A; Liu, Jiping; Magalhaes, Jurandir V

2015-01-01

Aluminum (Al) toxicity in acid soils is a significant limitation to crop production worldwide, as approximately 50% of the world's potentially arable soil is acidic. Because acid soils are such an important constraint to agriculture, understanding the mechanisms and genes conferring resistance to Al toxicity has been a focus of intense research interest in the decade since the last article on crop acid soil tolerance was published in this journal. An impressive amount of progress has been made during that time that has greatly increased our understanding of the diversity of Al resistance genes and mechanisms, how resistance gene expression is regulated and triggered by Al and Al-induced signals, and how the proteins encoded by these genes function and are regulated. This review examines the state of our understanding of the physiological, genetic, and molecular bases for crop Al tolerance, looking at the novel Al resistance genes and mechanisms that have been identified over the past ten years. Additionally, it examines how the integration of molecular and genetic analyses of crop Al resistance is starting to be exploited for the improvement of crop plants grown on acid soils via both molecular-assisted breeding and biotechnology approaches.

Positioning Behaviour: Attention Deficit/Hyperactivity Disorder (ADHD) in the Post-Welfare Educational Era

ERIC Educational Resources Information Center

Adams, Paul

2008-01-01

As schooling at least partly concerns itself with formulating relationships, it is understandable that certain behaviours are seen as necessary to the advancement of learning and teaching. However, how pupil behaviour is judged is an indication of wider political perspectives, which in turn assist in the categorization of behaviour. In this…

Can Brief Workshop Interventions Change Care Staff Understanding of Challenging Behaviours?

ERIC Educational Resources Information Center

Dowey, Alan; Toogood, Sandy; Hastings, Richard P.; Nash, Susie

2007-01-01

Background: The working culture surrounding challenging behaviour may have a strong effect on staff behaviour. As a first step to influencing staff talk about challenging behaviour, the aim of the present study was to explore whether a 1-day training workshop could have an effect on staff causal explanations. Methods: Fifty-four front line staff,…

Behavioural Intervention Practices for Stereotypic and Repetitive Behaviour in Individuals with Autism Spectrum Disorder: A Systematic Review

ERIC Educational Resources Information Center

Patterson, Stephanie Y.; Smith, Veronica; Jelen, Michaela

2010-01-01

Aim: The purpose of this systematic review was to examine the quality of conduct of experimental studies contributing to our empirical understanding of function-based behavioural interventions for stereotypic and repetitive behaviours (SRBs) in individuals with autism spectrum disorders (ASDs). Method: Systematic review methodology was used to…

Characterization of Thermal and Mechanical Impact on Aluminum Honeycomb Structures

NASA Technical Reports Server (NTRS)

Robinson, Christen M.

2013-01-01

This study supports NASA Kennedy Space Center's research in the area of intelligent thermal management systems and multifunctional thermal systems. This project addresses the evaluation of the mechanical and thermal properties of metallic cellular solid (MCS) materials; those that are lightweight; high strength, tunable, multifunctional and affordable. A portion of the work includes understanding the mechanical properties of honeycomb structured cellular solids upon impact testing under ambient, water-immersed, liquid nitrogen-cooled, and liquid nitrogen-immersed conditions. Additionally, this study will address characterization techniques of the aluminum honeycomb's ability to resist multiple high-rate loadings or impacts in varying environmental conditions, using various techniques for the quantitative and qualitative determination for commercial applicability.

Characterization of Medicago truncatula reduced calcium oxalate crystal mutant alleles

USDA-ARS?s Scientific Manuscript database

Calcium oxalate crystal formation is common in plants. Formation of these crystals has been shown to function in plant defense, calcium regulation, and aluminum tolerance. Although calcium oxalate is common and plays important roles in plant development, our understanding of how these crystals form ...

Mental Health and Health Risk Behaviours of Homeless Adolescents and Youth: A Mixed Methods Study

ERIC Educational Resources Information Center

Oppong Asante, Kwaku; Meyer-Weitz, Anna; Petersen, Inge

2016-01-01

Background: Homeless youth, as a vulnerable population are susceptible to various mental and health risk behaviours. However, less is known of the mental health status of these homeless youth and its role in risky sexual behaviours; neither do we understand the reasons homeless youth give for their engagement in various health risk behaviour.…

"Crossing the Rubicon": Understanding Chinese EFL Students' Volitional Process Underlying In-Class Participation with the Theory of Planned Behaviour

ERIC Educational Resources Information Center

Girardelli, Davide; Patel, Vijay K.; Martins-Shannon, Janine

2017-01-01

An extended model based on the theory of planned behaviour (TPB) was used to study Chinese English as a foreign language (EFL) students' in-class participation. The model included the core TPB constructs (behavioural intentions, attitudes, subjective norms, and perceived behavioural control/self-efficacy) and 2 additional constructs (foreign…

The Theory of Planned Behaviour: Predicting Pre-Service Teachers' Teaching Behaviour towards a Constructivist Approach

ERIC Educational Resources Information Center

Wang, Carrie Lijuan; Ha, Amy S.

2013-01-01

The two-pronged purpose of this study is to examine factors determining the teaching behaviour of pre-service physical education (PE) teachers towards a constructivist approach, likewise referred to as teaching games for understanding (TGfU). Theory of planned behaviour (TPB) was applied to guide the formulation of research purpose and design. Six…

Using network analysis to study behavioural phenotypes: an example using domestic dogs.

PubMed

Goold, Conor; Vas, Judit; Olsen, Christine; Newberry, Ruth C

2016-10-01

Phenotypic integration describes the complex interrelationships between organismal traits, traditionally focusing on morphology. Recently, research has sought to represent behavioural phenotypes as composed of quasi-independent latent traits. Concurrently, psychologists have opposed latent variable interpretations of human behaviour, proposing instead a network perspective envisaging interrelationships between behaviours as emerging from causal dependencies. Network analysis could also be applied to understand integrated behavioural phenotypes in animals. Here, we assimilate this cross-disciplinary progression of ideas by demonstrating the use of network analysis on survey data collected on behavioural and motivational characteristics of police patrol and detection dogs ( Canis lupus familiaris ). Networks of conditional independence relationships illustrated a number of functional connections between descriptors, which varied between dog types. The most central descriptors denoted desirable characteristics in both patrol and detection dog networks, with 'Playful' being widely correlated and possessing mediating relationships between descriptors. Bootstrap analyses revealed the stability of network results. We discuss the results in relation to previous research on dog personality, and benefits of using network analysis to study behavioural phenotypes. We conclude that a network perspective offers widespread opportunities for advancing the understanding of phenotypic integration in animal behaviour.

Using a Capability Maturity Model to Build on the Generational Approach to Student Engagement Practices

ERIC Educational Resources Information Center

Nelson, K.; Clarke, J.; Stoodley, I.; Creagh, T.

2015-01-01

The generational approach to conceptualising first-year student learning behaviour has made a useful contribution to understanding student engagement. It has an explicit focus on student behaviour and we suggest that a Capability Maturity Model interpretation may provide a complementary extension of that understanding as it builds on the…

Preschool Children's Understanding of Pro-Environmental Behaviours: Is It Too Hard for Them?

ERIC Educational Resources Information Center

Kos, Marjanca; Jerman, Janez; Anžlovar, Urška; Torkar, Gregor

2016-01-01

Early childhood is a period of life in which lifelong attitudes, values and patterns of behaviour regarding nature are shaped. Environmental education is becoming a growing area of interest in early childhood education. The aim of the research study was to identify children's understanding of why and how their pro-environmental behaviours…

Cultural Construction of Psychiatric Illness in Malaysia

PubMed Central

Razak, Asrenee Ab

2017-01-01

The concept of the cultural construction of illness is important in terms of understanding people’s behaviour. In this article, this idea is applied to psychiatric illness in Malaysia to explore how it is informed by sociocultural elements, a process that will help us understand the psychiatric expression and help-seeking behaviour of the country’s population. PMID:28894398

Aluminum agglomeration involving the second mergence of agglomerates on the solid propellants burning surface: Experiments and modeling

NASA Astrophysics Data System (ADS)

Ao, Wen; Liu, Xin; Rezaiguia, Hichem; Liu, Huan; Wang, Zhixin; Liu, Peijin

2017-07-01

The agglomeration of aluminum particles usually occurs on the burning surface of aluminized composite propellants. It leads to low propellant combustion efficiency and high two-phase flow losses. To reach a thorough understanding of aluminum agglomeration behaviors, agglomeration processes, and particles size distribution of Al/AP/RDX/GAP propellants were studied by using a cinephotomicrography experimental technique, under 5 MPa. Accumulation, aggregation, and agglomeration phenomena of aluminum particles have been inspected, as well as the flame asymmetry of burning agglomerates. Results reveals that the dependency of the mean and the maximum agglomeration diameter to the burning rate and the virgin aluminum size have the same trend. A second-time mergence of multiple agglomerates on the burning surface is unveiled. Two typical modes of second mergence are concluded, based upon vertical and level movement of agglomerates, respectively. The latter mode is found to be dominant and sometimes a combination of the two modes may occur. A new model of aluminum agglomeration on the burning surface of composite propellants is derived to predict the particulates size distribution with a low computational amount. The basic idea is inspired from the well-known pocket models. The pocket size of the region formed by adjacent AP particles is obtained through scanning electron microscopy of the propellant cross-section coupled to an image processing method. The second mergence mechanism, as well as the effect of the burning rate on the agglomeration processes, are included in the present model. The mergence of two agglomerates is prescribed to occur only if their separation distance is less than a critical value. The agglomerates size distribution resulting from this original model match reasonably with the experimental data. Moreover, the present model gives superior results for mean agglomeration diameter compared to common empirical and pocket models. The average prediction error is lower than 5% for the four propellants tested. Results of this study are expected to provide better insight and enrich in the theoretical frame of aluminum agglomeration.

The role of aluminum sensing and signaling in plant aluminum resistance.

PubMed

Liu, Jiping; Piñeros, Miguel A; Kochian, Leon V

2014-03-01

As researchers have gained a better understanding in recent years into the physiological, molecular, and genetic basis of how plants deal with aluminum (Al) toxicity in acid soils prevalent in the tropics and sub-tropics, it has become clear that an important component of these responses is the triggering and regulation of cellular pathways and processes by Al. In this review of plant Al signaling, we begin by summarizing the understanding of physiological mechanisms of Al resistance, which first led researchers to realize that Al stress induces gene expression and modifies protein function during the activation of Al resistance responses. Subsequently, an overview of Al resistance genes and their function provides verification that Al induction of gene expression plays a major role in Al resistance in many plant species. More recent research into the mechanistic basis for Al-induced transcriptional activation of resistance genes has led to the identification of several transcription factors as well as cis-elements in the promoters of Al resistance genes that play a role in greater Al-induced gene expression as well as higher constitutive expression of resistance genes in some plant species. Finally, the post-transcriptional and translational regulation of Al resistance proteins is addressed, where recent research has shown that Al can both directly bind to and alter activity of certain organic acid transporters, and also influence Al resistance proteins indirectly, via protein phosphorylation. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

High Temperature Analysis of Aluminum-Lithium 2195 Alloy to Aid in the Design of Improved Welding Techniques

NASA Technical Reports Server (NTRS)

Talia, George E.; Widener, Christian

1996-01-01

Aluminum-lithium alloys have extraordinary properties. The addition of lithium to an aluminum alloy decreases its density, while making large increases in its strength and hardness. The down side is that they are unstable at higher temperatures, and are subsequently difficult to weld or even manufacture. Martin Marietta, though, developed an aluminum-lithium alloy 2195 that was reported to have exceptional properties and good weldability. Thus, it was chosen as the alloy for the space shuttles super light external tank. Unfortunately, welding 2195 has turned out to be much more of a challenge than anticipated. Thus, research has been undergone in order to understand the mechanisms that are causing the welding problems. Gas reactions have been observed to be detrimental to weld strength. Water vapor has often been identified as having a significant role in these reactions. Nitrogen, however, has also been shown to have a direct correlation to porosity. These reactions were suspected as being complex and responsible for the two main problems of welding 2195. One, the initial welds of 2195 are much weaker than the parent metal. Second, each subsequent welding pass increases the size and number of cracks and porosity, yielding significant reductions in strength. Consequently, the objective of this research was to characterize the high-temperature reactions of 2195 in order to understand the mechanisms for crack growth and the formation of porosity in welds. In order to accomplish that goal, an optical hot-stage microscope, HSM, was used to observe those reactions as they occurred. Surface reactions of 2195 were observed in a variety of environments, such as air, vacuum, nitrogen and helium. For comparison, some samples of Al-2219 were also observed. Some of the reacted surfaces were then analyzed on a scanning electron microscope, SEM. Additionally, a gas chromatograph was used to analyze the gaseous products of the high temperature reactions.

Contemporary approaches to neural circuit manipulation and mapping: focus on reward and addiction

PubMed Central

Saunders, Benjamin T.; Richard, Jocelyn M.; Janak, Patricia H.

2015-01-01

Tying complex psychological processes to precisely defined neural circuits is a major goal of systems and behavioural neuroscience. This is critical for understanding adaptive behaviour, and also how neural systems are altered in states of psychopathology, such as addiction. Efforts to relate psychological processes relevant to addiction to activity within defined neural circuits have been complicated by neural heterogeneity. Recent advances in technology allow for manipulation and mapping of genetically and anatomically defined neurons, which when used in concert with sophisticated behavioural models, have the potential to provide great insight into neural circuit bases of behaviour. Here we discuss contemporary approaches for understanding reward and addiction, with a focus on midbrain dopamine and cortico-striato-pallidal circuits. PMID:26240425

Demystifying animal 'personality' (or not): why individual variation matters to experimental biologists.

PubMed

Roche, Dominique G; Careau, Vincent; Binning, Sandra A

2016-12-15

Animal 'personality', defined as repeatable inter-individual differences in behaviour, is a concept in biology that faces intense controversy. Critics argue that the field is riddled with terminological and methodological inconsistencies and lacks a sound theoretical framework. Nevertheless, experimental biologists are increasingly studying individual differences in physiology and relating these to differences in behaviour, which can lead to fascinating insights. We encourage this trend, and in this Commentary we highlight some of the benefits of estimating variation in (and covariation among) phenotypic traits at the inter- and intra-individual levels. We focus on behaviour while drawing parallels with physiological and performance-related traits. First, we outline some of the confusion surrounding the terminology used to describe repeatable inter-individual differences in behaviour. Second, we argue that acknowledging individual behavioural differences can help researchers avoid sampling and experimental bias, increase explanatory power and, ultimately, understand how selection acts on physiological traits. Third, we summarize the latest methods to collect, analyse and present data on individual trait variation. We note that, while measuring the repeatability of phenotypic traits is informative in its own right, it is only the first step towards understanding how natural selection and genetic architecture shape intra-specific variation in complex, labile traits. Thus, understanding how and why behavioural traits evolve requires linking repeatable inter-individual behavioural differences with core aspects of physiology (e.g. neurophysiology, endocrinology, energy metabolism) and evolutionary biology (e.g. selection gradients, heritability). © 2016. Published by The Company of Biologists Ltd.

Aluminum Micro-Balloons as Improved Fuel for Warhead Explosives

DTIC Science & Technology

2018-01-29

12-1-0006 Dr. Jerry W. Forbes Prepared by: Energetics Technology Center 10400 O Donnell Place Suite 202 St. Charles, MD 20603...the goal of enhancing blast waves. This 6.2 grant work provides the baseline technology to understand shock wave experiments done and to be done

Reducing behavioural risk factors for cancer: An affect regulation perspective.

PubMed

O'Leary, Daniel; Suri, Gaurav; Gross, James J

2018-01-01

Nearly half of all cancer deaths are attributable to preventable causes, primarily unhealthy behaviours such as tobacco use, alcohol use and overeating. In this review, we argue that people engage in these behaviours, at least in part, as a means of regulating their affective states. To better understand why people engage in these behaviours and how researchers might design interventions to promote the selection of healthier methods for regulating affect, we propose a conceptual model of affect regulation. We synthesise research from both the stress and coping tradition as well as the emotion and emotion regulation tradition, two literatures that are not typically integrated. In so doing, we indicate where researchers have made headway in understanding these behaviours as affect regulation and note how our model could be used to structure future work in a way that would be particularly advantageous to cancer control efforts.

Cue-based decision making. A new framework for understanding the uninvolved food consumer.

PubMed

Hamlin, Robert P

2010-08-01

This article examines the processes that occur within the consumer's head as they make a choice between alternative market offers at a low level of involvement. It discusses recent research that indicates that the Theory of Planned Behaviour and its derivatives have restricted validity as a predictor of food consumers' evaluations and purchase patterns. This has significant implications as Planned Behaviour is the dominant paradigm within food industry research. The article demonstrates that Planned Behaviour has acquired this status more by default than by proven merit. The specific reasons for the failure of Planned Behaviour are discussed. An alternative paradigm, Cue-Based Decision Making is developed from an existing literature, and is proposed as a basis for increasing our understanding of the uninvolved food consumer in order to predict and influence their behaviour. 2010 Elsevier Ltd. All rights reserved.

Modeling Near-Crack-Tip Plasticity from Nano- to Micro-Scales

NASA Technical Reports Server (NTRS)

Glaessgen, Edward H.; Saether, Erik; Hochhalter, Jake D.; Yamakov, Vesselin I.

2010-01-01

Several efforts that are aimed at understanding the plastic deformation mechanisms related to crack propagation at the nano-, meso- and micro-length scales including atomistic simulation, discrete dislocation plasticity, strain gradient plasticity and crystal plasticity are discussed. The paper focuses on discussion of newly developed methodologies and their application to understanding damage processes in aluminum and its alloys. Examination of plastic mechanisms as a function of increasing length scale illustrates increasingly complex phenomena governing plasticity

General description and understanding of the nonlinear dynamics of mode-locked fiber lasers.

PubMed

Wei, Huai; Li, Bin; Shi, Wei; Zhu, Xiushan; Norwood, Robert A; Peyghambarian, Nasser; Jian, Shuisheng

2017-05-02

As a type of nonlinear system with complexity, mode-locked fiber lasers are known for their complex behaviour. It is a challenging task to understand the fundamental physics behind such complex behaviour, and a unified description for the nonlinear behaviour and the systematic and quantitative analysis of the underlying mechanisms of these lasers have not been developed. Here, we present a complexity science-based theoretical framework for understanding the behaviour of mode-locked fiber lasers by going beyond reductionism. This hierarchically structured framework provides a model with variable dimensionality, resulting in a simple view that can be used to systematically describe complex states. Moreover, research into the attractors' basins reveals the origin of stochasticity, hysteresis and multistability in these systems and presents a new method for quantitative analysis of these nonlinear phenomena. These findings pave the way for dynamics analysis and system designs of mode-locked fiber lasers. We expect that this paradigm will also enable potential applications in diverse research fields related to complex nonlinear phenomena.

The Extended Theory of Planned Behaviour and College Grades: The Role of Cognition and Past Behaviour in the Prediction of Students' Academic Intentions and Achievements

ERIC Educational Resources Information Center

Kovac, Velibor Bobo; Cameron, David Lansing; Høigaard, Rune

2016-01-01

Understanding the underlying processes influencing college students' academic achievement represents an important goal of educational research. The aim of the present study was to examine the utility of the extended Theory of Planned Behaviour (TPB) and the relative influence of cognitive processes and measures of past behaviour in the prediction…

Children's Social Behaviour for Learning (SBL): Reported and Observed Social Behaviours in Contexts of School and Home

ERIC Educational Resources Information Center

Fisher, Laurel; Spencer, Fiona

2015-01-01

The aim is to understand the diversity in children's social behaviours that are vital to learning. It is proposed that a model of Social Behaviours for Learning (SBL) relies on the positions of the observers in relevant contexts. In this case, children are observed at school and at home. The alternatives are sociability as a personal trait or…

Understanding clusters of risk factors across different environmental and social contexts for the prediction of injuries among Canadian youth.

PubMed

Russell, K; Davison, C; King, N; Pike, I; Pickett, W

2016-05-01

Among Canadian youth, injury is the most common reason for presentation to the emergency department. Youth who commonly engage in multiple risk-taking behaviours are at greater risk for injury, but is it unknown if this phenomenon is more pronounced in different contexts. We aimed to study relationships between risk-taking behaviours and injury, and variations in such relationships between different environmental and social contexts, among youth in Canada. Risk-taking behaviour and injury outcome data were collected from grade 9 to 10 students using the 2009-2010 (Cycle 6) of the Health Behaviour in School-Aged Children Survey (n=10,429). Principal components analysis was used to identify clusters of risk-taking behaviours. Within each identified cluster, the degree of risk-taking was categorized into quartiles from lowest to highest engagement in the behaviours. Risk ratios with 95% confidence intervals were calculated to determine the association between the risk of any injury and the degree of risk-taking behaviour specific to the cluster. Clusters were then examined across home, school, neighbourhood and sport contexts. Four clusters of risk-taking behaviour were identified which were labelled as "gateway substance use", "hard drugs and weapons", "overt risk-taking", and "physical activity". Each cluster was related to injury occurrence in a graded fashion. Clusters of risk behaviour were most strongly associated with injuries sustained in neighbourhood settings, and expectedly, increasing physical activity behaviours were associated with increased risk of sport injuries and injuries occurring at school. This study furthers understanding of clustered risk-taking phenomena that put youth at increasing levels of injury risk. Higher risks for injury and associated gradients were observed in less structured contexts such as neighbourhoods. In contrast, clustered physical activity behaviours were most related to school injury or sport injury and were more likely to be sustained in a supervised context. Understanding the clustered and cumulative nature of risk-behaviours, and how these vary by environmental and social context, helps to explain potential mechanisms of injury as well as modifiable factors that may be important avenues for intervention. Copyright © 2015 Elsevier Ltd. All rights reserved.

Educators' Understanding of Young Children's Typical and Problematic Sexual Behaviour and Their Training in This Area

ERIC Educational Resources Information Center

Ey, Lesley-anne; McInnes, Elspeth; Rigney, Lester Irabinna

2017-01-01

As part of a wider study, this paper reports on Australian educators' understanding of children's typical and problematic sexual behaviour and their source of training in this area. A sample of 107 educators from government, independent and Catholic primary schools, preschools and care organisations across Australia answered an online…

Emotional and Behavioural Difficulties: The Effects of Structures, Ethos and Understandings on Provision in Irish Post-Primary Schools

ERIC Educational Resources Information Center

Mc Keon, David

2017-01-01

Emotional and behavioural difficulties (EBD) in mainstream schools in Ireland attract much attention and significant resources, yet little research has been conducted in the Irish context about how this concept is understood by practitioners, what influences that understanding nor how that influences provision in schools. This paper is based on…

How Trauma and Attachment Can Impact Neurodevelopment: Informing Our Understanding and Treatment of Sexual Behaviour Problems

ERIC Educational Resources Information Center

Creeden, Kevin

2009-01-01

Over the last several years there has been a notable increase in neurological and neurodevelopmental research, with a keen interest in applying this research to our understanding of everyday human learning and behaviour. One aspect of this research has examined how the experience of trauma in childhood can affect neurodevelopment with implications…

Does Academic Training Change Intentions? Drawing upon the Theory of Planned Behaviour to Improve Academic Performance

ERIC Educational Resources Information Center

Hodge, Brad; Wright, Brad; Bennett, Pauleen

2017-01-01

In order to improve transfer following training, it is important to understand what the training alters for each individual. We sought to develop a better understanding of the underlying mechanisms implicated in successful training. A questionnaire modelled on the Theory of Planned Behaviour (ToPB) was used to compare two distinct, academic skills…

Effect of Silicon on Desulfurization of Aluminum-killed Steels

NASA Astrophysics Data System (ADS)

Roy, Debdutta

Recent reports have suggested that silicon has a beneficial effect on the rate of desulfurization of Al-killed steel. This effect is difficult to understand looking at the overall desulfurization reaction which does not include silicon. However an explanation is proposed by taking into account the (SiO2)/[Si] equilibrium in which some Al reaching the slag-metal interface is used in reducing the SiO2 in the slag. This reaction can be suppressed to some extent if the silicon content of the metal is increased and in doing so, more Al will be available at the slag-metal interface for the desulfurization reaction and this would increase the rate of the desulfurization reaction. A model was developed, assuming the rates are controlled by mass transfer, taking into account the coupled reactions of the reduction of silica, and other unstable oxides, namely iron oxide and manganese oxide, in the slag and desulfurization reaction in the steel by aluminum. The model predicts that increasing silicon increases the rate and extent of desulfurization. Plant data was analyzed to obtain rough estimates of ladle desulfurization rates and also used to validate the model predictions. Experiments have been conducted on a kilogram scale of material in an induction furnace to test the hypothesis. The major conclusions of the study are as follows: The rate and extent of desulfurization improve with increasing initial silicon content in the steel; the effect diminishes at silicon contents higher than approximately 0.2% and with increasing slag basicity. This was confirmed with kilogram-scale laboratory experiments. The effects of the silicon content in the steel (and of initial FeO and MnO in the slag) largely arise from the dominant effects of these reactions on the equilibrium aluminum content of the steel: as far as aluminum consumption or pick-up is concerned, the Si/SiO2 reaction dominates, and desulfurization has only a minor effect on aluminum consumption. The rate is primarily controlled by mass transfer in the metal and slag phase mass transfer has a minor effect on the overall desulfurization kinetics. The model results are in agreement with the experimental data for the change in sulfur, silicon and aluminum contents with time which renders credibility to the underlying hypothesis of the kinetic model. Although the change of sulfur content with time is not very sensitive to the activity data source, the change of aluminum and silicon contents with time depend on the activity data source. The experimental results demonstrate that if the silicon content in the steel is high enough, the silicon can reduce the alumina from the slag and thus the steel melt will pick up aluminum. This can cause significant savings in aluminum consumption. For most of the slag compositions used in the experiments, the overall mass transfer is only limited by the steel phase and the slag phase mass transfer can be neglected for most practical cases. Mass balance calculations in the experiments support the basis of the model and also show that with respect to aluminum consumption, silica reduction is the main aluminum consuming (or production) reaction and the desulfurization reaction is only a secondary consumer of aluminum. Results from the plant trials conducted to test the effect of silicon on ladle desulfurization show that the rate and extent of desulfurization increase with the increase of the initial Si content, so in the ladle refining process, adding all the silicon in the beginning with the aluminum and the fluxes will be beneficial and could save considerable processing time at the ladle. The aluminum consumption for the heats with silicon added in the beginning (both in terms of the Al added to the steel and as slag deoxidants) is considerably lower compared to the cases where the silicon is added at the end. However, on a relative cost term, aluminum and silicon are similarly priced so substitution would not offer a major cost advantage.

What Is Popular Is Not Always Right--Measuring Teacher Professional Behaviour

ERIC Educational Resources Information Center

Morris, Zoe A.; Richardson, Paul W.; Watt, Helen M.G.

2012-01-01

Teaching is considered one of the most trusted professions, yet literature evaluating teachers' understanding of professional behaviour is scarce. Recently, technological advancements such as Social Networking Sites (SNS; e.g. Facebook) have created fresh debate about appropriate behaviour for teachers: in school and online. The "Professional…

Establishing a General Framework Civic Competency for European Youth

ERIC Educational Resources Information Center

Chow, Joseph

2012-01-01

This paper proposes a project that aims to construct a general framework of civic competency that will help understand civic competence as a blended measure of civic knowledge, skills, attitudes, values, beliefs, behavioural intentions and behaviours. By distinguishing between civic potential, civic behaviour and civic outcomes, with empirical…

Teachers' Perceptions of Disruptive Behaviour in Schools: A Psychological Perspective

ERIC Educational Resources Information Center

Nash, Poppy; Schlösser, Annette; Scarr, Tanya

2016-01-01

This article reports on an investigation into school teachers' perceptions of disruptive behaviour from a psychological perspective. The inter-disciplinary nature of this research bridges the understanding between educational and psychological perspectives on disruptive behaviour. This article discusses evidence that for the most troubled pupils,…

Behaviour Problems in Children with Genetic Disorders Causing Intellectual Disability

ERIC Educational Resources Information Center

Einfeld, Stewart L.

2005-01-01

This paper reviews several genetic syndromes that are associated with intellectual disability. The specific focus is on the behavioural patterns associated with the syndrome. Included in this review are the patterns of disruptive behaviour disorders associated with Fragile X, Prader-Willi, and Williams syndromes. Understanding and recognition of…

Understanding Behavioural Rigidity in Autism Spectrum Conditions: The Role of Intentional Control

ERIC Educational Resources Information Center

Poljac, Edita; Hoofs, Vincent; Princen, Myrthe M.; Poljac, Ervin

2017-01-01

Although behavioural rigidity belongs to the core symptoms of autism spectrum conditions, little is known about its underlying cognitive mechanisms. The current study investigated the role of intentional control mechanisms in behavioural rigidity in autism. Autistic individuals and their matched controls were instructed to repeatedly choose…

A Theoretical Framework towards Understanding of Emotional and Behavioural Difficulties

ERIC Educational Resources Information Center

Poulou, Maria S.

2014-01-01

Children's emotional and behavioural difficulties are the result of multiple individual, social and contextual factors working in concert. The current paper proposes a theoretical framework to interpret students' emotional and behavioural difficulties in schools, by taking into consideration teacher-student relationships, students'…

Glassy-state stabilization of a dominant negative inhibitor anthrax vaccine containing aluminum hydroxide and glycopyranoside lipid A adjuvants.

PubMed

Hassett, Kimberly J; Vance, David J; Jain, Nishant K; Sahni, Neha; Rabia, Lilia A; Cousins, Megan C; Joshi, Sangeeta; Volkin, David B; Middaugh, C Russell; Mantis, Nicholas J; Carpenter, John F; Randolph, Theodore W

2015-02-01

During transport and storage, vaccines may be exposed to temperatures outside of the range recommended for storage, potentially causing efficacy losses. To better understand and prevent such losses, dominant negative inhibitor (DNI), a recombinant protein antigen for a candidate vaccine against anthrax, was formulated as a liquid and as a glassy lyophilized powder with the adjuvants aluminum hydroxide and glycopyranoside lipid A (GLA). Freeze-thawing of the liquid vaccine caused the adjuvants to aggregate and decreased its immunogenicity in mice. Immunogenicity of liquid vaccines also decreased when stored at 40°C for 8 weeks, as measured by decreases in neutralizing antibody titers in vaccinated mice. Concomitant with efficacy losses at elevated temperatures, changes in DNI structure were detected by fluorescence spectroscopy and increased deamidation was observed by capillary isoelectric focusing (cIEF) after only 1 week of storage of the liquid formulation at 40°C. In contrast, upon lyophilization, no additional deamidation after 4 weeks at 40°C and no detectable changes in DNI structure or reduction in immunogenicity after 16 weeks at 40°C were observed. Vaccines containing aluminum hydroxide and GLA elicited higher immune responses than vaccines adjuvanted with only aluminum hydroxide, with more mice responding to a single dose. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

Status and future concerns of clinical and environmental aluminum toxicology.

PubMed

Flaten, T P; Alfrey, A C; Birchall, J D; Savory, J; Yokel, R A

1996-08-30

A wide range of toxic effects of aluminum (Al) have been demonstrated in plants and aquatic animals in nature, in experimental animals by several routes of exposure, and under different clinical conditions in humans. Aluminum toxicity is a major problem in agriculture, affecting perhaps as much as 40% of arable soils in the world. In fresh waters acidified by acid rain, Al toxicity has led to fish extinction. Aluminum is a very potent neurotoxicant. In humans with chronic renal failure on dialysis, Al causes encephalopathy, osteomalacia, and anemia. There are also reports of such effects in certain patient groups without renal failure. Subtle neurocognitive and psychomotor effects and electroencephalograph (EEG) abnormalities have been reported at plasma Al levels as low as 50 micrograms/L. Infants could be particularly susceptible to Al accumulation and toxicity, reduced renal function being one contributory cause. Recent reports clearly show that Al accumulation occurs in the tissues of workers with long-term occupational exposure to Al dusts or fumes, and also indicate that such exposure may cause subtle neurological effects. Increased efforts should be directed toward defining the full range of potentially harmful effects in humans. To this end, multidisciplinary collaborative research efforts are encouraged, involving scientists from many different specialties. Emphasis should be placed on increasing our understanding of the chemistry of Al in biological systems, and on determining the cellular and molecular mechanisms of Al toxicity.

Aluminum work function: Effect of oxidation, mechanical scraping and ion bombardment

NASA Technical Reports Server (NTRS)

Vinet, P.; Lemogne, T.; Montes, H.

1985-01-01

Surface studies have been performed on aluminum polycrystalline surfaces which have been mechanically scraped. Such studies were initiated in order to understand surface effects occurring in tribological processes which involve rubbing surfaces and the effects of adsorption of oxygen. To characterize the surfaces, the following three different experimental approaches have been used: (1) X.P.S. (X-ray photoelectron spectroscopy), in order to check the cleanliness of the surfaces and follow the adsorption and oxidation kinetics; (2) Analysis of the work function changes by following the energy spectra of secondary electrons emitted under low energy electron bombardment; and (3) Analysis of photoemission intensities under U.V. excitation. The reference state being chosen to be the surface cleaned by ion bombardment and exposures to oxygen atmospheres have been shown to lower the work function of clean polycrystalline aluminum by 1.2 eV. The oxygen pressure is found to affect only the kinetics of these experiments. Mechanical scraping has been shown to induce a decrease ( 0.3 eV) in the work function, which could sharply modify the kinetics of adsorption on the surface.

A zinc finger transcription factor ART1 regulates multiple genes implicated in aluminum tolerance in rice.

PubMed

Yamaji, Naoki; Huang, Chao Feng; Nagao, Sakiko; Yano, Masahiro; Sato, Yutaka; Nagamura, Yoshiaki; Ma, Jian Feng

2009-10-01

Aluminum (Al) toxicity is the major limiting factor of crop production on acid soils, but some plant species have evolved ways of detoxifying Al. Here, we report a C2H2-type zinc finger transcription factor ART1 (for Al resistance transcription factor 1), which specifically regulates the expression of genes related to Al tolerance in rice (Oryza sativa). ART1 is constitutively expressed in the root, and the expression level is not affected by Al treatment. ART1 is localized in the nucleus of all root cells. A yeast one-hybrid assay showed that ART1 has a transcriptional activation potential and interacts with the promoter region of STAR1, an important factor in rice Al tolerance. Microarray analysis revealed 31 downstream transcripts regulated by ART1, including STAR1 and 2 and a couple of homologs of Al tolerance genes in other plants. Some of these genes were implicated in both internal and external detoxification of Al at different cellular levels. Our findings shed light on comprehensively understanding how plants detoxify aluminum to survive in an acidic environment.

Cross-Beam Laser Joining of AA 6111 to Galvanized Steel in a Coach Peel Configuration

NASA Astrophysics Data System (ADS)

Yang, Guang; Mohammadpour, Masoud; Yazdian, Nima; Ma, Junjie; Carlson, Blair; Wang, Hui-Ping; Kovacevic, Radovan

2017-06-01

Cross-beam laser joining of aluminum alloy 6111 to hot-dip galvanized steel in the coach-peel configuration was investigated with the addition of AA 4047 filler wire. The filler material was not only brazed onto the galvanized steel but also partially fusion-welded with the aluminum panel. Through adjusting the laser power to 3.4 kW, a desirable wetting and spreading of filler wire on both panel surfaces could be achieved, and the thickness of intermetallic layer in the middle section of the interface between the weld bead and steel was less than 2 μm. To better understand the solid/liquid interfacial reaction at the brazing interface, two rotary Gaussian heat source models were introduced to simulate the temperature distribution in the molten pool by using the finite element method. Joint properties were examined in terms of microstructure and mechanical properties. During the tensile test, the fracture of coupons took place at the aluminum side rather than along the interface between the intermetallic layer and steel panel. No failure occurred during the three-point bending test.

Complete mitochondrial genome of the aluminum-tolerant fungus Rhodotorula taiwanensis RS1 and comparative analysis of Basidiomycota mitochondrial genomes

PubMed Central

Zhao, Xue Qiang; Aizawa, Tomoko; Schneider, Jessica; Wang, Chao; Shen, Ren Fang; Sunairi, Michio

2013-01-01

The complete mitochondrial genome of Rhodotorula taiwanensis RS1, an aluminum-tolerant Basidiomycota fungus, was determined and compared with the known mitochondrial genomes of 12 Basidiomycota species. The mitochondrial genome of R. taiwanensis RS1 is a circular DNA molecule of 40,392 bp and encodes the typical 15 mitochondrial proteins, 23 tRNAs, and small and large rRNAs as well as 10 intronic open reading frames. These genes are apparently transcribed in two directions and do not show syntenies in gene order with other investigated Basidiomycota species. The average G+C content (41%) of the mitochondrial genome of R. taiwanensis RS1 is the highest among the Basidiomycota species. Two introns were detected in the sequence of the atp9 gene of R. taiwanensis RS1, but not in that of other Basidiomycota species. Rhodotorula taiwanensis is the first species of the genus Rhodotorula whose full mitochondrial genome has been sequenced; and the data presented here supply valuable information for understanding the evolution of fungal mitochondrial genomes and researching the mechanism of aluminum tolerance in microorganisms. PMID:23427135

Radiation tolerance of piezoelectric bulk single-crystal aluminum nitride

DOE Office of Scientific and Technical Information (OSTI.GOV)

David A. Parks; Bernhard R. Tittmann

2014-07-01

For practical use in harsh radiation environments, we pose selection criteria for piezoelectric materials for nondestructive evaluation (NDE) and material characterization. Using these criteria, piezoelectric aluminum nitride is shown to be an excellent candidate. The results of tests on an aluminumnitride-based transducer operating in a nuclear reactor are also presented. We demonstrate the tolerance of single-crystal piezoelectric aluminum nitride after fast and thermal neutron fluences of 1.85 × 1018 neutron/cm2 and 5.8 × 1018 neutron/cm2, respectively, and a gamma dose of 26.8 MGy. The radiation hardness of AlN is most evident from the unaltered piezoelectric coefficient d33, which measured 5.5more » pC/N after a fast and thermal neutron exposure in a nuclear reactor core for over 120 MWh, in agreement with the published literature value. The results offer potential for improving reactor safety and furthering the understanding of radiation effects on materials by enabling structural health monitoring and NDE in spite of the high levels of radiation and high temperatures, which are known to destroy typical commercial ultrasonic transducers.« less

The Tübingen Model-Atom Database: A Revised Aluminum Model Atom and its Application for the Spectral Analysis of White Dwarfs

NASA Astrophysics Data System (ADS)

Löbling, L.

2017-03-01

Aluminum (Al) nucleosynthesis takes place during the asymptotic-giant-branch (AGB) phase of stellar evolution. Al abundance determinations in hot white dwarf stars provide constraints to understand this process. Precise abundance measurements require advanced non-local thermodynamic stellar-atmosphere models and reliable atomic data. In the framework of the German Astrophysical Virtual Observatory (GAVO), the Tübingen Model-Atom Database (TMAD) contains ready-to- use model atoms for elements from hydrogen to barium. A revised, elaborated Al model atom has recently been added. We present preliminary stellar-atmosphere models and emergent Al line spectra for the hot white dwarfs G191-B2B and RE 0503-289.

Compression Behavior and Energy Absorption of Aluminum Alloy AA6061 Tubes with Multiple Holes

NASA Astrophysics Data System (ADS)

Simhachalam, Bade; Lakshmana Rao, C.; Srinivas, Krishna

2014-05-01

In this article, compression behavior and energy absorption of aluminum alloy AA6061 tubes are investigated both experimentally and numerically. Static and dynamic simulations are done using LS-Dyna Software for AA6061 tubes. True stress-plastic strain curves from the tensile test are used in the static and dynamic simulations of AA6061 tubes. The energy absorption values between experimental compression results and numeral simulation are found to be in good agreement. Dynamic simulations are done with drop velocity of up to 10 m/s to understand the inertia effects on energy absorption. The deformed modes from the numerical simulation are compared between tubes with and without holes in static and dynamic conditions.

Workplace bullying in nursing: towards a more critical organisational perspective.

PubMed

Hutchinson, Marie; Vickers, Margaret; Jackson, Debra; Wilkes, Lesley

2006-06-01

Workplace bullying is a significant issue confronting the nursing profession. Bullying in nursing is frequently described in terms of 'oppressed group' behaviour or 'horizontal violence'. It is proposed that the use of 'oppressed group' behaviour theory has fostered only a partial understanding of the phenomenon in nursing. It is suggested that the continued use of 'oppressed group' behaviour as the major means for understanding bullying in nursing places a flawed emphasis on bullying as a phenomenon that exists only among nurses, rather than considering it within the broader organisational context. The work of Foucault and the 'circuits of power' model proposed by Clegg are used to provide an alternative understanding of the operation of power within organisations and therefore another way to conceive bullying in the nursing workforce.

Motivational wheel running reverses cueing behavioural inflexibility in rodents.

PubMed

Chomiak, Taylor; Brown, Andrew R; Teskey, G Campbell; Hu, Bin

2017-12-01

Behavioural inflexibility and associated atypical learning behaviours are common clinical manifestations of the autism spectrum disorder (ASD) phenotype. Despite advances in our understanding of ASD, little research has been devoted to experimental interventions that might help to circumvent behavioural inflexibility in ASD. The current paper suggests that motivational locomotion in the form of wheel running can reduce behavioural inflexibility and learning impairments in an ASD rat model, and discusses how the strategy of reward-coupled locomotor activity may lead to clinical interventions for children with ASD.

Understanding determinants of nutrition, physical activity and quality of life among older adults: the Wellbeing, Eating and Exercise for a Long Life (WELL) study.

PubMed

McNaughton, Sarah A; Crawford, David; Ball, Kylie; Salmon, Jo

2012-09-12

Nutrition and physical activity are major determinants of health and quality of life; however, there exists little research focusing on determinants of these behaviours in older adults. This is important, since just as these behaviours vary according to subpopulation, it is likely that the determinants also vary. An understanding of the modifiable determinants of nutrition and physical activity behaviours among older adults to take into account the specific life-stage context is required in order to develop effective interventions to promote health and well-being and prevent chronic disease and improve quality of life. The aim of this work is to identify how intrapersonal, social and environmental factors influence nutrition and physical activity behaviours among older adults living in urban and rural areas. This study is a cohort study of adults aged 55-65 years across urban and rural Victoria, Australia. Participants completed questionnaires at baseline in 2010 and will complete follow-up questionnaires in 2012 and 2014. Self-report questionnaires will be used to assess outcomes such as food intake, physical activity and sedentary behaviours, anthropometry and quality of life. Explanatory variables include socioeconomic position, and measures of the three levels of influence on older adults' nutrition and physical activity behaviours (intrapersonal, social and perceived environmental influences). Obesity and its determinant behaviours, physical inactivity and poor diet are major public health concerns and are significant determinants of the quality of life among the ageing population. There is a critical need for a better understanding of the determinants of nutrition and physical activity in this important target group. This research will provide evidence for the development of effective policies and programs to promote and support increased physical activity and healthy eating behaviours among older adults.

Hydroisomerization of n-hexadecane: remarkable selectivity of mesoporous silica post-synthetically modified with aluminum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabyrov, Kairat; Musselwhite, Nathan; Melaet, Gérôme

As the impact of acids on catalytically driven chemical transformations is tremendous, fundamental understanding of catalytically relevant factors is essential for the design of more efficient solid acid catalysts. In this work, we employed a post-synthetic doping method to synthesize a highly selective hydroisomerization catalyst and to demonstrate the effect of acid strength and density, catalyst microstructure, and platinum nanoparticle size on the reaction rate and selectivity. Aluminum doped mesoporous silica catalyzed gas-phase n-hexadecane isomerization with remarkably high selectivity to monobranched isomers (~95%), producing a substantially higher amount of isomers than traditional zeolite catalysts. Mildly acidic sites generated by post-syntheticmore » aluminum grafting were found to be the main reason for its high selectivity. The flexibility of the post-synthetic doping method enabled us to systematically explore the effect of the acid site density on the reaction rate and selectivity, which has been extremely difficult to achieve with zeolite catalysts. We found that a higher density of Brønsted acid sites leads to higher cracking of n-hexadecane presumably due to an increased surface residence time. Furthermore, regardless of pore size and microstructure, hydroisomerization turnover frequency linearly increased as a function of Brønsted acid site density. In addition to strength and density of acid sites, platinum nanoparticle size affected catalytic activity and selectivity. The smallest platinum nanoparticles produced the most effective bifunctional catalyst presumably because of higher percolation into aluminum doped mesoporous silica, generating more 'intimate' metallic and acidic sites. Finally, the aluminum doped silica catalyst was shown to retain its remarkable selectivity towards isomers even at increased reaction conversions.« less

Hydroisomerization of n-hexadecane: remarkable selectivity of mesoporous silica post-synthetically modified with aluminum

DOE PAGES

Sabyrov, Kairat; Musselwhite, Nathan; Melaet, Gérôme; ...

2017-01-01

As the impact of acids on catalytically driven chemical transformations is tremendous, fundamental understanding of catalytically relevant factors is essential for the design of more efficient solid acid catalysts. In this work, we employed a post-synthetic doping method to synthesize a highly selective hydroisomerization catalyst and to demonstrate the effect of acid strength and density, catalyst microstructure, and platinum nanoparticle size on the reaction rate and selectivity. Aluminum doped mesoporous silica catalyzed gas-phase n-hexadecane isomerization with remarkably high selectivity to monobranched isomers (~95%), producing a substantially higher amount of isomers than traditional zeolite catalysts. Mildly acidic sites generated by post-syntheticmore » aluminum grafting were found to be the main reason for its high selectivity. The flexibility of the post-synthetic doping method enabled us to systematically explore the effect of the acid site density on the reaction rate and selectivity, which has been extremely difficult to achieve with zeolite catalysts. We found that a higher density of Brønsted acid sites leads to higher cracking of n-hexadecane presumably due to an increased surface residence time. Furthermore, regardless of pore size and microstructure, hydroisomerization turnover frequency linearly increased as a function of Brønsted acid site density. In addition to strength and density of acid sites, platinum nanoparticle size affected catalytic activity and selectivity. The smallest platinum nanoparticles produced the most effective bifunctional catalyst presumably because of higher percolation into aluminum doped mesoporous silica, generating more 'intimate' metallic and acidic sites. Finally, the aluminum doped silica catalyst was shown to retain its remarkable selectivity towards isomers even at increased reaction conversions.« less

Identification of UDP glucosyltransferases from the aluminum-resistant tree Eucalyptus camaldulensis forming β-glucogallin, the precursor of hydrolyzable tannins.

PubMed

Tahara, Ko; Nishiguchi, Mitsuru; Frolov, Andrej; Mittasch, Juliane; Milkowski, Carsten

2018-08-01

In the highly aluminum-resistant tree Eucalyptus camaldulensis, hydrolyzable tannins are proposed to play a role in internal detoxification of aluminum, which is a major factor inhibiting plant growth on acid soils. To understand and modulate the molecular mechanisms of aluminum detoxification by hydrolyzable tannins, the biosynthetic genes need to be identified. In this study, we identified and characterized genes encoding UDP-glucose:gallate glucosyltransferase, which catalyzes the formation of 1-O-galloyl-β-d-glucose (β-glucogallin), the precursor of hydrolyzable tannins. By homology-based cloning, seven full-length candidate cDNAs were isolated from E. camaldulensis and expressed in Escherichia coli as recombinant N-terminal His-tagged proteins. Phylogenetic analysis classified four of these as UDP glycosyltransferase (UGT) 84A subfamily proteins (UGT84A25a, -b, UGT84A26a, -b) and the other three as UGT84J subfamily proteins (UGT84J3, -4, -5). In vitro enzyme assays showed that the UGT84A proteins catalyzed esterification of UDP-glucose and gallic acid to form 1-O-galloyl-β-d-glucose, whereas the UGT84J proteins were inactive. Further analyses with UGT84A25a and -26a indicated that they also formed 1-O-glucose esters of other structurally related hydroxybenzoic and hydroxycinnamic acids with a preference for hydroxybenzoic acids. The UGT84A genes were expressed in leaves, stems, and roots of E. camaldulensis, regardless of aluminum stress. Taken together, our results suggest that the UGT84A subfamily enzymes of E. camaldulensis are responsible for constitutive production of 1-O-galloyl-β-d-glucose, which is the first step of hydrolyzable tannin biosynthesis. Copyright © 2018 Elsevier Ltd. All rights reserved.

Aluminum is More Cytotoxic than Lunar Dust in Human Skin and Lung Fibroblasts

NASA Technical Reports Server (NTRS)

Hammond, D.; Shehata, T.; Hammond, D.; Shehata, T.; Wise, J.P.; Martino, J; Wise, J.P.; Wise, J.P.

2009-01-01

NASA plans to build a permanent space station on the moon to explore its surface. The surface of the moon is covered in lunar dust, which consists of fine particles that contain silicon, aluminum and titanium, among others. Because this will be a manned base, the potential toxicity of this dust has to be studied. Also, toxicity standards for potential exposure have to be set. To properly address the potential toxicity of lunar dust we need to understand the toxicity of its individual components, as well as their combined effects. In order to study this we compared NASA simulant JSC-1AVF (volcanic ash particles), that simulates the dust found on the moon, to aluminum, the 3rd most abundant component in lunar dust. We tested the cytotoxicity of both compounds on human lung and skin fibroblasts (WTHBF-6 and BJhTERT cell lines, respectively). Aluminum oxide was more cytotoxic than lunar dust to both cell lines. In human lung fibroblasts 5, 10 and 50 g/sq cm of aluminum oxide induced 85%, 61% and 30% relative survival, respectively. For human skin fibroblasts the same concentrations induced 58%, 41% and 58% relative survival. Lunar dust was also cytotoxic to both cell lines, but its effects were seen at higher concentrations: 50, 100, 200 and 400 g/sq cm of lunar dust induced a 69%, 46%, 35% and 30% relative survival in the skin cells and 53%, 16%, 8% and 2% on the lung cells. Overall, for both compounds, lung cells were more sensitive than skin cells. This work was supported by a NASA EPSCoR grant through the Maine Space Grant Consortium (JPW), the Maine Center for Toxicology and Environmental Health., a Fulbright Grant (JM) and a Delta Kappa Gamma Society International World Fellowship (JM).

Predictive modelling: parents’ decision making to use online child health information to increase their understanding and/or diagnose or treat their child’s health

PubMed Central

2012-01-01

Background The quantum increases in home Internet access and available online health information with limited control over information quality highlight the necessity of exploring decision making processes in accessing and using online information, specifically in relation to children who do not make their health decisions. The aim of this study was to understand the processes explaining parents’ decisions to use online health information for child health care. Methods Parents (N = 391) completed an initial questionnaire assessing the theory of planned behaviour constructs of attitude, subjective norm, and perceived behavioural control, as well as perceived risk, group norm, and additional demographic factors. Two months later, 187 parents completed a follow-up questionnaire assessing their decisions to use online information for their child’s health care, specifically to 1) diagnose and/or treat their child’s suspected medical condition/illness and 2) increase understanding about a diagnosis or treatment recommended by a health professional. Results Hierarchical multiple regression showed that, for both behaviours, attitude, subjective norm, perceived behavioural control, (less) perceived risk, group norm, and (non) medical background were the significant predictors of intention. For parents’ use of online child health information, for both behaviours, intention was the sole significant predictor of behaviour. The findings explain 77% of the variance in parents’ intention to treat/diagnose a child health problem and 74% of the variance in their intentions to increase their understanding about child health concerns. Conclusions Understanding parents’ socio-cognitive processes that guide their use of online information for child health care is important given the increase in Internet usage and the sometimes-questionable quality of health information provided online. Findings highlight parents’ thirst for information; there is an urgent need for health professionals to provide parents with evidence-based child health websites in addition to general population education on how to evaluate the quality of online health information. PMID:23228171

Repeatable group differences in the collective behaviour of stickleback shoals across ecological contexts

PubMed Central

2018-01-01

Establishing how collective behaviour emerges is central to our understanding of animal societies. Previous research has highlighted how universal interaction rules shape collective behaviour, and that individual differences can drive group functioning. Groups themselves may also differ considerably in their collective behaviour, but little is known about the consistency of such group variation, especially across different ecological contexts that may alter individuals' behavioural responses. Here, we test if randomly composed groups of sticklebacks differ consistently from one another in both their structure and movement dynamics across an open environment, an environment with food, and an environment with food and shelter. Based on high-resolution tracking data of the free-swimming shoals, we found large context-associated changes in the average behaviour of the groups. But despite these changes and limited social familiarity among group members, substantial and predictable behavioural differences between the groups persisted both within and across the different contexts (group-level repeatability): some groups moved consistently faster, more cohesively, showed stronger alignment and/or clearer leadership than other groups. These results suggest that among-group heterogeneity could be a widespread feature in animal societies. Future work that considers group-level variation in collective behaviour may help understand the selective pressures that shape how animal collectives form and function. PMID:29436496

Scent marking in Sunda clouded leopards (Neofelis diardi): novel observations close a key gap in understanding felid communication behaviours.

PubMed

Allen, Maximilian L; Wittmer, Heiko U; Setiawan, Endro; Jaffe, Sarah; Marshall, Andrew J

2016-10-14

Intraspecific communication is integral to the behavioural ecology of solitary carnivores, but observing and quantifying their communication behaviours in natural environments is difficult. Our systematic literature review found that basic information on scent marking is completely lacking for 23% of all felid species, and information on 21% of other felid species comes solely from one study of captive animals. Here we present results of the first systematic investigation of the scent marking behaviours of Sunda clouded leopards in the wild. Our observations using motion-triggered video cameras in Indonesian Borneo are novel for clouded leopards, and contrary to previous descriptions of their behaviour. We found that clouded leopards displayed 10 distinct communication behaviours, with olfaction, scraping, and cheek rubbing the most frequently recorded. We also showed that males make repeated visits to areas they previously used for marking and that multiple males advertise and receive information at the same sites, potentially enhancing our ability to document and monitor clouded leopard populations. The behaviours we recorded are remarkably similar to those described in other solitary felids, despite tremendous variation in the environments they inhabit, and close a key gap in understanding and interpreting communication behaviours of clouded leopards and other solitary felids.

Scent marking in Sunda clouded leopards (Neofelis diardi): novel observations close a key gap in understanding felid communication behaviours

PubMed Central

Allen, Maximilian L.; Wittmer, Heiko U.; Setiawan, Endro; Jaffe, Sarah; Marshall, Andrew J.

2016-01-01

Intraspecific communication is integral to the behavioural ecology of solitary carnivores, but observing and quantifying their communication behaviours in natural environments is difficult. Our systematic literature review found that basic information on scent marking is completely lacking for 23% of all felid species, and information on 21% of other felid species comes solely from one study of captive animals. Here we present results of the first systematic investigation of the scent marking behaviours of Sunda clouded leopards in the wild. Our observations using motion-triggered video cameras in Indonesian Borneo are novel for clouded leopards, and contrary to previous descriptions of their behaviour. We found that clouded leopards displayed 10 distinct communication behaviours, with olfaction, scraping, and cheek rubbing the most frequently recorded. We also showed that males make repeated visits to areas they previously used for marking and that multiple males advertise and receive information at the same sites, potentially enhancing our ability to document and monitor clouded leopard populations. The behaviours we recorded are remarkably similar to those described in other solitary felids, despite tremendous variation in the environments they inhabit, and close a key gap in understanding and interpreting communication behaviours of clouded leopards and other solitary felids. PMID:27739507

An exploratory baseline study of boy chorister vocal behaviour and development in an intensive professional context.

PubMed

Williams, Jenevora; Welch, Graham; Howard, David M

2005-01-01

Currently, there is no existing published empirical longitudinal data on the singing behaviours and development of choristers who perform in UK cathedrals and major chapels. Longitudinal group data is needed to provide a baseline against which individual chorister development can be mapped. The choristers perform to a professional standard on a daily basis, usually with linked rehearsals, whilst also following a full school curriculum. The impact of this intensive schedule in relation to current vocal behaviour, health and future development requires investigation. Furthermore, it is also necessary to understand the relationship between the requirements of chorister singing behaviour and adolescent voice change. The paper will report the initial findings of a new longitudinal chorister study, based in one of London's cathedrals. Singing and vocal behaviours are being profiled on a six-monthly basis using data from a specially designed acoustic and behavioural instrument. The information obtained will enable us to understand better the effects of such training and performance on underlying vocal behaviour and vocal health. The findings will also have implications for singing teachers and choral directors in relation to particular methods of vocal education and rehearsal.

Host behaviour–parasite feedback: an essential link between animal behaviour and disease ecology

PubMed Central

Archie, Elizabeth A.; Craft, Meggan E.; Hawley, Dana M.; Martin, Lynn B.; Moore, Janice; White, Lauren

2016-01-01

Animal behaviour and the ecology and evolution of parasites are inextricably linked. For this reason, animal behaviourists and disease ecologists have been interested in the intersection of their respective fields for decades. Despite this interest, most research at the behaviour–disease interface focuses either on how host behaviour affects parasites or how parasites affect behaviour, with little overlap between the two. Yet, the majority of interactions between hosts and parasites are probably reciprocal, such that host behaviour feeds back on parasites and vice versa. Explicitly considering these feedbacks is essential for understanding the complex connections between animal behaviour and parasite ecology and evolution. To illustrate this point, we discuss how host behaviour–parasite feedbacks might operate and explore the consequences of feedback for studies of animal behaviour and parasites. For example, ignoring the feedback of host social structure on parasite dynamics can limit the accuracy of predictions about parasite spread. Likewise, considering feedback in studies of parasites and animal personalities may provide unique insight about the maintenance of variation in personality types. Finally, applying the feedback concept to links between host behaviour and beneficial, rather than pathogenic, microbes may shed new light on transitions between mutualism and parasitism. More generally, accounting for host behaviour–parasite feedbacks can help identify critical gaps in our understanding of how key host behaviours and parasite traits evolve and are maintained. PMID:27053751

Protection motivation theory and social distancing behaviour in response to a simulated infectious disease epidemic.

PubMed

Williams, Lynn; Rasmussen, Susan; Kleczkowski, Adam; Maharaj, Savi; Cairns, Nicole

2015-01-01

Epidemics of respiratory infectious disease remain one of the most serious health risks facing the population. Non-pharmaceutical interventions (e.g. hand-washing or wearing face masks) can have a significant impact on the course of an infectious disease epidemic. The current study investigated whether protection motivation theory (PMT) is a useful framework for understanding social distancing behaviour (i.e. the tendency to reduce social contacts) in response to a simulated infectious disease epidemic. There were 230 participants (109 males, 121 females, mean age 32.4 years) from the general population who completed self-report measures assessing the components of PMT. In addition, participants completed a computer game which simulated an infectious disease epidemic in order to provide a measure of social distancing behaviour. The regression analyses revealed that none of the PMT variables were significant predictors of social distancing behaviour during the simulation task. However, fear (β = .218, p < .001), response efficacy (β = .175, p < .01) and self-efficacy (β = .251, p < .001) were all significant predictors of intention to engage in social distancing behaviour. Overall, the PMT variables (and demographic factors) explain 21.2% of the variance in intention. The findings demonstrated that PMT was a useful framework for understanding intention to engage in social distancing behaviour, but not actual behaviour during the simulated epidemic. These findings may reflect an intention-behaviour gap in relation to social distancing behaviour.

Model development for household waste prevention behaviour

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bortoleto, Ana Paula, E-mail: a.bortoleto@sheffield.ac.uk; Kurisu, Kiyo H.; Hanaki, Keisuke

Highlights: Black-Right-Pointing-Pointer We model waste prevention behaviour using structure equation modelling. Black-Right-Pointing-Pointer We merge attitude-behaviour theories with wider models from environmental psychology. Black-Right-Pointing-Pointer Personal norms and perceived behaviour control are the main behaviour predictors. Black-Right-Pointing-Pointer Environmental concern, moral obligation and inconvenience are the main influence on the behaviour. Black-Right-Pointing-Pointer Waste prevention and recycling are different dimensions of waste management behaviour. - Abstract: Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude-behaviour theories with elements from wider models from environmental psychology,more » an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz's altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste management behaviour requiring particular approaches to increase individuals' engagement in future policies.« less

A physical model for the acousto-ultrasonic method. Ph.D. Thesis Final Report

NASA Technical Reports Server (NTRS)

Kiernan, Michael T.; Duke, John C., Jr.

1990-01-01

A basic physical explanation, a model, and comments on NDE application of the acousto-ultrasonic (AU) method for composite materials are presented. The basis of this work is a set of experiments where a sending and a receiving piezoelectric transducer were both oriented normal to the surface, at different points, on aluminum plates, various composite plates, and a tapered aluminum plate. The purpose and basic idea is introduced. Also, general comments on the AU method are offered. A literature review is offered for areas pertinent, such as composite materials, wave propagation, ultrasonics, and the AU. Special emphasis is given to theory which is used later on and past experimental results that are important to the physical understanding of the AU method. The experimental set-up, procedure, and the ensuing analysis are described. The experimental results are presented in both a quantitative and qualitative manner. A physical understanding of experimental results based on elasticity solution is furnished. Modeling and applications of the AU method is discussed for composite material and general conclusions are stated. The physical model of the AU method for composite materials is offered, something which has been much needed and sorely lacking. This physical understanding is possible due to the extensive set of experimental measurements, also reported.

Assessment of knowledge on sexually transmitted infections and sexual risk behaviour in two rural districts of Bhutan.

PubMed

Norbu, Kunzang; Mukhia, Sontosh; Tshokey

2013-12-06

The incidence of STI is high and increasing in Bhutan. Poor understanding of risky sexual behavior could be a cause. Comprehensive community surveys have not been previously done. This study was conducted to assess local knowledge on STIs and sexual risk behaviour in two rural districts of Bhutan: Gasa and Zhemgang. The study population included residents aged 15-49 years in the two districts. Health Assistants (HAs) visited all households to distribute questionnaires assessing understanding of knowledge on STIs and risk behaviour. Questionnaires were scored and analyzed. The average score was 61.6%. Respondents had highest knowledge about prevention and lowest about disease and complications. There was a positive correlation between level of education and knowledge on STI (P < 0.05). Almost 37% of students scored low. Nearly one-third of the study population was practicing risky sexual behavior with 31.2% having sexual relationships with non-regular partners and 10.9% had extramarital sexual contacts. Regular use of condoms with non-regular partners was 49.1%. The most common reason for not using condom was unavailability during the sexual encounter. The study showed that despite increasing knowledge there was no reduction in risky sexual behaviour (p > 0.05). The study population had variable understanding of STIs and their complications. One in three persons practiced risky sexual behaviour, higher in men. Condom use was low. There was no reduction of risky sexual behaviour with increasing level of knowledge indicating that increasing level of knowledge does not necessarily reduce risky sexual behaviour.

Effects of a Redesigned Classroom on Play Behaviour among Preschool Children

ERIC Educational Resources Information Center

Acer, Dilek; Gözen, Göksu; Firat, Zehra Saadet; Kefeli, Hatice; Aslan, Büsra

2016-01-01

Current research exists regarding the play behaviour of students in various settings and with varying abilities. Regardless, there needs to be improved understanding of how students' play behaviour is affected when their classroom environment is significantly redesigned. This study examined, over a 21-week period between December 2013 and May…

A Causal Modelling Approach to the Development of Theory-Based Behaviour Change Programmes for Trial Evaluation

ERIC Educational Resources Information Center

Hardeman, Wendy; Sutton, Stephen; Griffin, Simon; Johnston, Marie; White, Anthony; Wareham, Nicholas J.; Kinmonth, Ann Louise

2005-01-01

Theory-based intervention programmes to support health-related behaviour change aim to increase health impact and improve understanding of mechanisms of behaviour change. However, the science of intervention development remains at an early stage. We present a causal modelling approach to developing complex interventions for evaluation in…

Relationships among Parenting Practices, Parental Stress, Child Behaviour, and Children's Social-Cognitive Development

ERIC Educational Resources Information Center

Guajardo, Nicole R.; Snyder, Gregory; Petersen, Rachel

2009-01-01

The present study included observational and self-report measures to examine associations among parental stress, parental behaviour, child behaviour, and children's theory of mind and emotion understanding. Eighty-three parents and their 3- to 5-year-old children participated. Parents completed measures of parental stress, parenting (laxness,…

From behavioural analyses to models of collective motion in fish schools

PubMed Central

Lopez, Ugo; Gautrais, Jacques; Couzin, Iain D.; Theraulaz, Guy

2012-01-01

Fish schooling is a phenomenon of long-lasting interest in ethology and ecology, widely spread across taxa and ecological contexts, and has attracted much interest from statistical physics and theoretical biology as a case of self-organized behaviour. One topic of intense interest is the search of specific behavioural mechanisms at stake at the individual level and from which the school properties emerges. This is fundamental for understanding how selective pressure acting at the individual level promotes adaptive properties of schools and in trying to disambiguate functional properties from non-adaptive epiphenomena. Decades of studies on collective motion by means of individual-based modelling have allowed a qualitative understanding of the self-organization processes leading to collective properties at school level, and provided an insight into the behavioural mechanisms that result in coordinated motion. Here, we emphasize a set of paradigmatic modelling assumptions whose validity remains unclear, both from a behavioural point of view and in terms of quantitative agreement between model outcome and empirical data. We advocate for a specific and biologically oriented re-examination of these assumptions through experimental-based behavioural analysis and modelling. PMID:24312723

A brief review of salient factors influencing adult eating behaviour.

PubMed

Emilien, Christine; Hollis, James H

2017-12-01

A better understanding of the factors that influence eating behaviour is of importance as our food choices are associated with the risk of developing chronic diseases such as obesity, CVD, type 2 diabetes or some forms of cancer. In addition, accumulating evidence suggests that the industrial food production system is a major contributor to greenhouse gas emission and may be unsustainable. Therefore, our food choices may also contribute to climate change. By identifying the factors that influence eating behaviour new interventions may be developed, at the individual or population level, to modify eating behaviour and contribute to society's health and environmental goals. Research indicates that eating behaviour is dictated by a complex interaction between physiology, environment, psychology, culture, socio-economics and genetics that is not fully understood. While a growing body of research has identified how several single factors influence eating behaviour, a better understanding of how these factors interact is required to facilitate the developing new models of eating behaviour. Due to the diversity of influences on eating behaviour this would probably necessitate a greater focus on multi-disciplinary research. In the present review, the influence of several salient physiological and environmental factors (largely related to food characteristics) on meal initiation, satiation (meal size) and satiety (inter-meal interval) are briefly discussed. Due to the large literature this review is not exhaustive but illustrates the complexity of eating behaviour. The present review will also highlight several limitations that apply to eating behaviour research.

The Littoral Combat Ship: Is the US Navy Assuming Too Much Risk?

DTIC Science & Technology

2006-06-16

whereas the General Dynamics design will focus on an all- aluminum trimaran hull. Additional study of the pros and cons based on these two designs and......also important to understand that not all risk is bad. The SWOT analysis, which looks at the strengths, weaknesses, opportunities, and threats

Cell biology of aluminum toxicity and tolerance in higher plants.

PubMed

Matsumoto, H

2000-01-01

Aluminum is the major element in the soil and exists as a stable complex with oxygen and silicate in neutral and weakly acidic soil. When the soil pH is lower than 4.5-5.0, Al is solubilized in the soil water and absorbed by plant roots. Absorbed Al inhibits root elongation severely, and the elongation of roots exposed to Al3+ as low as mumol level is inhibited within an hour(s). Thus much research has been conducted to understand the mechanism of Al toxicity and tolerance. Al is located specifically at the root apex. Al-sensitive plants absorb more Al than do Al-tolerant plants, and thus the exclusion mechanism of Al is the major idea for Al tolerance. The understanding of Al stress in plants is important for stable food production in future. Al is a complicated ion in its chemical form and biological function. In this chapter, mechanisms of Al toxicity and tolerance proposed during the past few decades as well as future topics are described from physiological and molecular points of view.

Has bioscience reconciled mind and body?

PubMed

Davies, Carmel; Redmond, Catherine; Toole, Sinead O; Coughlan, Barbara

2016-09-01

The aim of this discursive paper is to explore the question 'has biological science reconciled mind and body?'. This paper has been inspired by the recognition that bioscience has a historical reputation for privileging the body over the mind. The disregard for the mind (emotions and behaviour) cast bioscience within a 'mind-body problem' paradigm. It has also led to inherent limitations in its capacity to contribute to understanding the complex nature of health. This is a discursive paper. Literature from the history and sociology of science and psychoneuroimmunology (1975-2015) inform the arguments in this paper. The historical and sociological literature provides the basis for a socio-cultural debate on mind-body considerations in science since the 1970s. The psychoneuroimmunology literature draws on mind-body bioscientific theory as a way to demonstrate how science is reconciling mind and body and advancing its understanding of the interconnections between emotions, behaviour and health. Using sociological and biological evidence, this paper demonstrates how bioscience is embracing and advancing its understanding of mind-body interconnectedness. It does this by demonstrating the emotional and behavioural alterations that are caused by two common phenomena; prolonged, chronic peripheral inflammation and prolonged psychological stress. The evidence and arguments provided has global currency that advances understanding of the inter-relationship between emotions, behaviour and health. This paper shows how bioscience has reconciled mind and body. In doing so, it has advanced an understanding of science's contribution to the inter-relationship between emotions, behaviour and health. The biological evidence supporting mind-body science has relevance to clinical practice for nurses and other healthcare professions. This paper discusses how this evidence can inform and enhance clinical practice directly and through research, education and policy. © 2015 John Wiley & Sons Ltd.

Plasma Spray and Pack Cementation Process Optimization and Oxidation Behaviour of Novel Multilayered Coatings

NASA Astrophysics Data System (ADS)

Gao, Feng

The hot section components in gas turbines are subjected to a harsh environment with the temperature being increased continuously. The higher temperature has directly resulted in severe oxidation of these components. Monolithic coatings such as MCrAIY and aluminide have been traditionally used to protect the components from oxidation; however, increased operating temperature quickly deteriorates the coatings due to accelerated diffusion of aluminum in the coatings. To improve the oxidation resistance a group of multilayered coatings are developed in this study. The multilayered coatings consist of a Cr-Si co-deposited layer as the diffusion barrier, a plasma sprayed NiCrA1Y coating as the middle layer and an aluminized top layer. The Cr-Si and aluminized layers are fabricated using pack cementation processes and the NiCrA1Y coatings are produced using the Mettech Axial III(TM) System. All of the coating processes are optimized using the methodology of Design of Experiments (DOE) and the results are analyzed using statistical method. The optimal processes are adopted to fabricate the multilayered coatings for oxidation tests. The coatings are exposed in air at 1050°C and 1150°C for 1000 hr. The results indicate that a Cr layer and a silicon-rich barrier layer have formed on the interface between the Cr-Si coating and the NiCrA1Y coating. This barrier layer not only prevents aluminum and chromium from diffusing into the substrate, but also impedes the diffusion of other elements from the substrate into the coating. The results also reveal that, for optimal oxidation resistance at 1050°C, the top layer in a multilayered coating should have at least Al/Ni ratio of one; whereas the multilayered coating with the All Ni ratio of two in the top layer exhibits the best oxidation resistance at 1150°C. The DOE methodology provides an excellent means for process optimization and the selection of oxidation test matrix, and also offers a more thorough understanding of the effects of process parameters on the coating microstructure, and the effects of layers and their interactions on the oxidation behavior of the multilayered coatings.

‘And you’ll suddenly realise ‘I’ve not washed my hands’: medical students’, junior doctors’ and medical educators’ narratives of hygiene behaviours

PubMed Central

Cresswell, Penelope

2018-01-01

Objective Compliance to hygiene behaviours has long been recognised as important in the prevention and control of healthcare associated infections, but medical doctors still display some of the lowest rates of compliance of all healthcare workers. We aim to understand compliance to hygiene behaviours by analysing medical students’, junior doctors’ and medical educators’ narratives of these behaviours to identify their respective attitudes and beliefs around compliance and how these are learnt during training. Such an understanding can inform future interventions to improve compliance targeted to areas of greatest need. Design A qualitative study, using narrative interviews (nine focus groups and one individual interview). Data were analysed thematically using inductive framework analysis. Setting Teaching hospitals in the UK. Participants Convenience sample of 25 participants: third-year medical students in their first clinical year (n=13), junior doctors (n=6) and medical educators (n=6). Results We identified four main themes: (1) knowledge, (2) constraints, (3) role models/culture and (4) hygiene as an added extra. Knowledge varied across participant groups and appeared to influence behaviours; medical students relied on what they have been told by seniors, while medical educators relied on their own knowledge and experience. There was a strong belief that evidence for the effectiveness of good hygiene behaviours is lacking. Furthermore, medical educators’ behaviour appears to strongly influence others. Finally, hygiene was predominately viewed as an added extra rather than an integral part of the process. Conclusions Awareness of the evidence around good hygiene needs to be improved at all levels. Medical students and junior doctors should be encouraged to consider why they are asked to perform certain hygiene behaviours in order to improve ownership of those behaviours. Medical educators need to recognise their responsibilities as role models for their junior counterparts, thereby understanding their role in developing the culture of hygiene practices within their clinical domains. PMID:29572392

[Ethnography for nursing research, a sensible way to understand human behaviors in their context].

PubMed

Bourbonnais, Anne

2015-03-01

Understanding human behaviours is at the heart of the nursing discipline. Knowledge development about behaviours is essential to guide nursing practice in the clinical field, for nursing education or in nursing management. In this context, ethnography is often overlooked as a research method to understand better behaviours in their sociocultural environment This article aims to present the principles guiding this qualitative method and its application to nursing research. First, the ethnographic method and some of its variants will be described. The conduct of an ethnographic study will then be exposed. Finally, examples of ethnographic studies in nursing will be presented. This article provides a foundation for the development of research protocols using ethnography for the advancement of nursing knowledge, as well as better use of ethnographic findings to improve care practices.

Toward the modelling of safety violations in healthcare systems.

PubMed

Catchpole, Ken

2013-09-01

When frontline staff do not adhere to policies, protocols, or checklists, managers often regard these violations as indicating poor practice or even negligence. More often than not, however, these policy and protocol violations reflect the efforts of well intentioned professionals to carry out their work efficiently in the face of systems poorly designed to meet the diverse demands of patient care. Thus, non-compliance with institutional policies and protocols often signals a systems problem, rather than a people problem, and can be influenced among other things by training, competing goals, context, process, location, case complexity, individual beliefs, the direct or indirect influence of others, job pressure, flexibility, rule definition, and clinician-centred design. Three candidates are considered for developing a model of safety behaviour and decision making. The dynamic safety model helps to understand the relationship between systems designs and human performance. The theory of planned behaviour suggests that intention is a function of attitudes, social norms and perceived behavioural control. The naturalistic decision making paradigm posits that decisions are based on a wider view of multiple patients, expertise, systems complexity, behavioural intention, individual beliefs and current understanding of the system. Understanding and predicting behavioural safety decisions could help us to encourage compliance to current processes and to design better interventions.

The influence of causal knowledge on the willingness to change attitude towards climate change: results from an empirical study

NASA Astrophysics Data System (ADS)

Tasquier, Giulia; Pongiglione, Francesca

2017-09-01

Climate change is one of the significant global challenges currently facing humanity. Even though its seriousness seems to be common knowledge among the public, the reaction of individuals to it has been slow and uncertain. Many studies assert that simply knowing about climate change is not enough to generate people's behavioural response. They claim, indeed, that in some cases scientific literacy can even obstruct behavioural response instead. However, recent surveys show a rather poor understanding of climate dynamics and argue that lack of knowledge about causal relationships within climate dynamics can hinder behavioural response, since the individual is not able to understand his/her role as causal agent and therefore doesn't know how to take proper action. This study starts from the hypothesis that scientific knowledge focused on clarifying climate dynamics can make people understand not only dynamics themselves, but also their interactive relationship with the environment. Teaching materials on climate change based on such considerations were designed and implemented in a course for secondary-school students with the aim of investigating whether this kind of knowledge had an influence on students' willingness to adopt pro-environmental behaviours. Questionnaires were delivered for testing the effect of the teaching experience on knowledge and behaviour.

Biomechanics of Tetrahymena escaping from a dead end

PubMed Central

Kikuchi, Kenji

2018-01-01

Understanding the behaviours of swimming microorganisms in various environments is important for understanding cell distribution and growth in nature and industry. However, cell behaviour in complex geometries is largely unknown. In this study, we used Tetrahymena thermophila as a model microorganism and experimentally investigated cell behaviour between two flat plates with a small angle. In this configuration, the geometry provided a ‘dead end' line where the two flat plates made contact. The results showed that cells tended to escape from the dead end line more by hydrodynamics than by a biological reaction. In the case of hydrodynamic escape, the cell trajectories were symmetric as they swam to and from the dead end line. Near the dead end line, T. thermophila cells were compressed between the two flat plates while cilia kept beating with reduced frequency; those cells again showed symmetric trajectories, although the swimming velocity decreased. These behaviours were well reproduced by our computational model based on biomechanics. The mechanism of hydrodynamic escape can be understood in terms of the torque balance induced by lubrication flow. We therefore conclude that a cell's escape from the dead end was assisted by hydrodynamics. These findings pave the way for understanding cell behaviour and distribution in complex geometries. PMID:29491169

Carbothermic Aluminum Production Using Scrap Aluminum As A Coolant

DOEpatents

LaCamera, Alfred F.

2002-11-05

A process for producing aluminum metal by carbothermic reduction of alumina ore. Alumina ore is heated in the presence of carbon at an elevated temperature to produce an aluminum metal body contaminated with about 10-30% by wt. aluminum carbide. Aluminum metal or aluminum alloy scrap then is added to bring the temperature to about 900-1000.degree. C. and precipitate out aluminum carbide. The precipitated aluminum carbide is filtered, decanted, or fluxed with salt to form a molten body having reduced aluminum carbide content.

Habit Discontinuity, Self-Activation, and the Diminishing Influence of Context Change: Evidence from the UK Understanding Society Survey.

PubMed

Thomas, Gregory Owen; Poortinga, Wouter; Sautkina, Elena

2016-01-01

Repeated behaviours in stable contexts can become automatic habits. Habits are resistant to information-based techniques to change behaviour, but are contextually cued, so a change in behaviour context (e.g., location) weakens habit strength and can facilitate greater consideration of the behaviour. This idea was demonstrated in previous work, whereby people with strong environmental attitudes have lower car use, but only after recently moving home. We examine the habit discontinuity hypothesis by analysing the Understanding Society dataset with 18,053 individuals representative of the UK population, measuring time since moving home, travel mode to work, and strength of environmental attitudes. Results support previous findings where car use is significantly lower among those with stronger environmental views (but only after recently moving home), and in addition, demonstrate a trend where this effects decays as the time since moving home increases. We discuss results in light of moving into a new home being a potential 'window of opportunity' to promote pro-environmental behaviours.

Habit Discontinuity, Self-Activation, and the Diminishing Influence of Context Change: Evidence from the UK Understanding Society Survey

PubMed Central

Thomas, Gregory Owen; Poortinga, Wouter; Sautkina, Elena

2016-01-01

Repeated behaviours in stable contexts can become automatic habits. Habits are resistant to information-based techniques to change behaviour, but are contextually cued, so a change in behaviour context (e.g., location) weakens habit strength and can facilitate greater consideration of the behaviour. This idea was demonstrated in previous work, whereby people with strong environmental attitudes have lower car use, but only after recently moving home. We examine the habit discontinuity hypothesis by analysing the Understanding Society dataset with 18,053 individuals representative of the UK population, measuring time since moving home, travel mode to work, and strength of environmental attitudes. Results support previous findings where car use is significantly lower among those with stronger environmental views (but only after recently moving home), and in addition, demonstrate a trend where this effects decays as the time since moving home increases. We discuss results in light of moving into a new home being a potential ‘window of opportunity’ to promote pro-environmental behaviours. PMID:27120333

Partnership work between Public Health and Health Psychology: introduction to a novel training programme

PubMed Central

2010-01-01

Background Public health services implement individual, community and population level interventions to change health behaviours, improve healthy life expectancy and reduce health inequalities. Understanding and changing health behaviour is complex. Integrating behaviour change theory and evidence into interventions has the potential to improve services. Methods Health Psychologists apply evidence and theories aimed at understanding and changing health behaviour. A Scottish programme is piloting the training of Health Psychologists within NHS contexts to address prominent public health challenges. Results This article outlines the details of this novel programme. Two projects are examined to illustrate the potential of partnership working between public health and health psychology. Conclusion In order to develop and improve behaviour change interventions and services, public health planners may want to consider developing and using the knowledge and skills of Health Psychologists. Supporting such training within public health contexts is a promising avenue to build critical NHS internal mass to tackle the major public health challenges ahead. PMID:21070643

Smectite clay--inorganic nanoparticle mixed suspensions: phase behaviour and rheology.

PubMed

Bailey, Louise; Lekkerkerker, Henk N W; Maitland, Geoffrey C

2015-01-14

Smectite clay minerals and their suspensions have long been of both great scientific and applications interest and continue to display a remarkable range of new and interesting behaviour. Recently there has been an increasing interest in the properties of mixed suspensions of such clays with nanoparticles of different size, shape and charge. This review aims to summarize the current status of research in this area focusing on phase behaviour and rheological properties. We will emphasize the rich range of data that has emerged for these systems and the challenges they present for future investigations. The review starts with a brief overview of the behaviour and current understanding of pure smectite clays and their suspensions. We then cover the work on smectite clay-inorganic nanoparticle mixed suspensions according to the shape and charge of the nanoparticles - spheres, rods and plates either positively or negatively charged. We conclude with a summary of the overarching trends that emerge from these studies and indicate where gaps in our understanding need further research for better understanding the underlying chemistry and physics.

A Social Identity Approach to Understanding and Promoting Physical Activity.

PubMed

Stevens, Mark; Rees, Tim; Coffee, Pete; Steffens, Niklas K; Haslam, S Alexander; Polman, Remco

2017-10-01

Against the backdrop of a global physical inactivity crisis, attempts to both understand and positively influence physical activity behaviours are characterized by a focus on individual-level factors (e.g. cognitions, attitudes, motivation). We outline a new perspective, drawn from an emerging body of work exploring the applicability of social identity and self-categorization theories to domains of sport and health, from which to understand and address this pervasive problem. This social identity approach suggests that the groups to which people belong can be, and often are, incorporated into their sense of self and, through this, are powerful determinants of physical activity-related behaviour. We start by reviewing the current state of physical activity research and highlighting the potential for the social identity approach to help understand how social factors influence these behaviours. Next, we outline the theoretical underpinnings of the social identity approach and provide three key examples that speak to the analytical and practical value of the social identity approach in physical activity settings. Specifically, we argue that social identity (1) can be harnessed to promote engagement in physical activity, (2) underpins exercise group behaviour, and (3) underpins effective leadership in exercise settings. We conclude by identifying prospects for a range of theory-informed research developments.

Occupational exposure to aluminum and its biomonitoring in perspective.

PubMed

Riihimäki, Vesa; Aitio, Antero

2012-11-01

Exposure to aluminum at work is widespread, and people are exposed to several species of aluminum, which differ markedly as to the kinetics and toxicity. Especially welding of aluminum is widely applied and continuously expanding. Inhalation of fine particles of sparsely soluble aluminum results in the retention of deposited particles in the lungs. From the lungs, aluminum is released to the blood and distributed to bones and the brain, and excreted to urine. Soluble aluminum compounds are not accumulated in the lungs. Neurotoxicity is the critical effect of exposure to sparsely soluble aluminum compounds. Studies on workers exposed to aluminum welding fumes have revealed disturbances of cognitive processes, memory and concentration, and changes in mood and EEG. Early pulmonary effects have been observed among aluminum powder-production workers using high-resolution computed tomography. The primary objective of aluminum biomonitoring (BM) is to help prevent the formation of aluminum burden in the lungs and thereby to prevent harmful accumulation of aluminum in target organs. BM of aluminum can be effectively used for this purpose in the production/use of aluminum powders, aluminum welding, as well as plasma cutting, grinding, polishing and thermal spraying of aluminum. BM of aluminum may also be similarly useful in the smelting of aluminum and probably in the production of corundum. BM can help identify exposed individuals and roughly quantitate transient exposure but cannot predict health effects in the production/use of soluble aluminum salts. For urinary aluminum (U-Al) we propose an action limit of 3 µmol/L, corrected to a relative density of 1.021, in a sample collected preshift after two days without occupational exposure, and without use of aluminum-containing drugs. This value corresponds roughly to 2.3 µmol/g creatinine. Compliance with this limit is expected to protect the worker against the critical effect of aluminum in exposure to sparsely soluble aluminum dusts, the cognitive function of the central nervous system. For serum aluminum (S-Al), we do not propose an action limit because S-Al is less sensitive as an indicator of aluminum load.

Relationship among values, beliefs, norms and ecological behaviour.

PubMed

González López, Antonio; Amérigo Cuervo-Arango, María

2008-11-01

The present study focuses mainly on the relationship between psychological constructs and ecological behaviour. Empirical analysis links personal values, ecological beliefs, consequences of environmental conditions, denial of ecological obligation, environmental control, personal norms and environment protection behaviour. Survey data from a path analysis of a Spanish sample of 403 individuals were used, showing that ecological beliefs, personal norms and eco-altruistic values have become the main psychological explanatory variables of environment protective behaviour. Ecological beliefs, when measured by the New Ecological Paradigm Scale, affected ecological behaviour decisively. Environmental and altruistic values were shown to be related to moral obligation, and a basic variable to understand behaviour. Personal norm mediated the effects of values and environmental control on ecological behaviour.

Are Behavioural Interventions Doomed to Fail? Challenges to Self-Management Support in Chronic Diseases.

PubMed

Vallis, Michael

2015-08-01

Self-management and self-management support are concepts very familiar to those of us in diabetes care. These concepts require openness to understanding the behaviours of persons with diabetes broadly, not only behaviours restricted to the biomedical perspective. Understanding the importance of health behaviour change and working within the Expanded Chronic Care Model define the context within which self-management support should occur. The purpose of this perspective is to identify a potential limitation in existing self-management support initiatives. This potential limitation reflects provider issues, not patient issues; that is, true self-management support might require changes by healthcare providers. Specifically, although behavioural interventions within the context of academic research studies are evidence based, behaviour change interventions implemented in general practice settings might prove less effective unless healthcare providers are able to shift from a practice based on the biomedical model to a practice based on the self-management support model. The purpose of this article is to facilitate effective self-management support by encouraging providers to switch from a model of care based on the expert clinician encountering the uninformed help seeker (the biomedical model) to one guided by collaboration grounded in the principles of description, prediction and choice. Key to understanding the value of making this shift are patient-centered communication principles and the tenets of complexity theory. Copyright © 2015 Canadian Diabetes Association. Published by Elsevier Inc. All rights reserved.

Using health psychology to help patients: theories of behaviour change.

PubMed

Barley, Elizabeth; Lawson, Victoria

2016-09-08

Behaviour change theories and related research evidence highlight the complexity of making and sticking to health-related behaviour changes. These theories make explicit factors that influence behaviour change, such as health beliefs, past behaviour, intention, social influences, perceived control and the context of the behaviour. Nurses can use this information to understand why a particular patient may find making recommended health behaviour changes difficult and to determine factors that may help them. This article outlines five well-established theories of behaviour change: the health belief model, the theory of planned behaviour, the stages of change model, self-determination theory, and temporal self-regulation theory. The evidence for interventions that are informed by these theories is then explored and appraised. The extent and quality of evidence varies depending on the type of behaviour and patients targeted, but evidence from randomised controlled trials indicates that interventions informed by theory can result in behaviour change.

Membrane Purification Cell for Aluminum Recycling

DOE Office of Scientific and Technical Information (OSTI.GOV)

David DeYoung; James Wiswall; Cong Wang

2011-11-29

Recycling mixed aluminum scrap usually requires adding primary aluminum to the scrap stream as a diluent to reduce the concentration of non-aluminum constituents used in aluminum alloys. Since primary aluminum production requires approximately 10 times more energy than melting scrap, the bulk of the energy and carbon dioxide emissions for recycling are associated with using primary aluminum as a diluent. Eliminating the need for using primary aluminum as a diluent would dramatically reduce energy requirements, decrease carbon dioxide emissions, and increase scrap utilization in recycling. Electrorefining can be used to extract pure aluminum from mixed scrap. Some example applications includemore » producing primary grade aluminum from specific scrap streams such as consumer packaging and mixed alloy saw chips, and recycling multi-alloy products such as brazing sheet. Electrorefining can also be used to extract valuable alloying elements such as Li from Al-Li mixed scrap. This project was aimed at developing an electrorefining process for purifying aluminum to reduce energy consumption and emissions by 75% compared to conventional technology. An electrolytic molten aluminum purification process, utilizing a horizontal membrane cell anode, was designed, constructed, operated and validated. The electrorefining technology could also be used to produce ultra-high purity aluminum for advanced materials applications. The technical objectives for this project were to: - Validate the membrane cell concept with a lab-scale electrorefining cell; - Determine if previously identified voltage increase issue for chloride electrolytes holds for a fluoride-based electrolyte system; - Assess the probability that voltage change issues can be solved; and - Conduct a market and economic analysis to assess commercial feasibility. The process was tested using three different binary alloy compositions (Al-2.0 wt.% Cu, Al-4.7 wt.% Si, Al-0.6 wt.% Fe) and a brazing sheet scrap composition (Al-2.8 wt.% Si-0.7 wt.% Fe-0.8 wt.% Mn),. Purification factors (defined as the initial impurity concentration divided by the final impurity concentration) of greater than 20 were achieved for silicon, iron, copper, and manganese. Cell performance was measured using its current and voltage characteristics and composition analysis of the anode, cathode, and electrolytes. The various cells were autopsied as part of the study. Three electrolyte systems tested were: LiCl-10 wt. % AlCl3, LiCl-10 wt. % AlCl3-5 wt.% AlF3 and LiF-10 wt.% AlF3. An extended four-day run with the LiCl-10 wt.% AlCl3-5 wt.% AlF3 electrolyte system was stable for the entire duration of the experiment, running at energy requirements about one third of the Hoopes and the conventional Hall-Heroult process. Three different anode membranes were investigated with respect to their purification performance and survivability: a woven graphite cloth with 0.05 cm nominal thickness & > 90 % porosity, a drilled rigid membrane with nominal porosity of 33%, and another drilled rigid graphite membrane with increased thickness. The latter rigid drilled graphite was selected as the most promising membrane design. The economic viability of the membrane cell to purify scrap is sensitive to primary & scrap aluminum prices, and the cost of electricity. In particular, it is sensitive to the differential between scrap and primary aluminum price which is highly variable and dependent on the scrap source. In order to be economically viable, any scrap post-processing technology in the U.S. market must have a total operating cost well below the scrap price differential of $0.20-$0.40 per lb to the London Metal Exchange (LME), a margin of 65%-85% of the LME price. The cost to operate the membrane cell is estimated to be < $0.24/lb of purified aluminum. The energy cost is estimated to be $0.05/lb of purified aluminum with the remaining costs being repair and maintenance, electrolyte, labor, taxes and depreciation. The bench-scale work on membrane purification cell process has demonstrated technological advantages and substantial energy and investment savings against other electrolytic processes. However, in order to realize commercial reality, the following items need to be fully investigated: 1. Further evaluation of a pure fluoride electrolyte. 2. Investigate alternative non conductive, more mechanically robust and chemically inert membrane candidates. 3. Optimized membrane cell design to understand contribution of fluid flow patterns and the mass transfer conditions. 4. Improve current efficiency and total metallic aluminum recovery from the cell. All Tasks and Milestones were completed successfully.« less

Importance of fish behaviour in modelling conservation problems: food limitation as an example

Treesearch

Steven Railsback; Bret Harvey

2011-01-01

Simulation experiments using the inSTREAM individual-based brown trout Salmo trutta population model explored the role of individual adaptive behaviour in food limitation, as an example of how behaviour can affect managers’ understanding of conservation problems. The model includes many natural complexities in habitat (spatial and temporal variation in characteristics...

Context Influences the Motivation for Stereotypic and Repetitive Behaviour in Children Diagnosed with Intellectual Disability with and without Autism

ERIC Educational Resources Information Center

Joosten, Annette V.; Bundy, Anita C.; Einfeld, Stewart L.

2012-01-01

Background: Children are motivated to engage in stereotypic and repetitive behaviours for a number of reasons. Their motivation seems to change according to context, but little empirical evidence supports that observation. Interventions designed to reduce the behaviours may be improved by an increased understanding of the interaction between…

Monitoring Treatment Integrity: An Alternative to the "Consult and Hope" Strategy in School-Based Behavioural Consultation

ERIC Educational Resources Information Center

Wilkinson, Lee A.

2006-01-01

An international trend in school psychology services is a shift from an emphasis on assessment-based activities to a paradigm of consultation problem-solving and behavioural intervention. As the profession experiences an expansion of roles and functions, school psychologists should have an understanding of a critical aspect of behaviour change:…

Staff Attributions about Challenging Behaviours of People with Intellectual Disabilities and Transactional Stress Process: A Qualitative Study

ERIC Educational Resources Information Center

Cudre-Mauroux, A.

2010-01-01

Background: Staff explanations about challenging behaviours of people with intellectual disabilities are purported to play a significant role in the way they respond to them. Despite attempts made in research to understand the mechanisms of causality, a lack of association between attributions, emotions and behaviours is reported. This study…

Evaluating a Health Behaviour Model for Persons with and without an Intellectual Disability

ERIC Educational Resources Information Center

Brehmer-Rinderer, B.; Zigrovic, L.; Weber, G.

2014-01-01

Background: Based on the idea of the Common Sense Model of Illness Representations by Leventhal as well as Lohaus's concepts of health and illness, a health behaviour model was designed to explain health behaviours applied by persons with intellectual disabilities (ID). The key proposal of this model is that the way someone understands the…

Short-crack growth behaviour in an aluminum alloy: An AGARD cooperative test program

NASA Technical Reports Server (NTRS)

Newman, J. C., Jr.; Edwards, P. R.

1988-01-01

An AGARD Cooperative Test Program on the growth of short fatigue cracks was conducted to define the significance of the short-crack effect, to compare test results from various laboratories, and to evaluate an existing analytical crack-growth prediction model. The initiation and growth of short fatigue cracks (5 micrometer to 2 mm) from the surface of a semi-circular notch in 2024-T3 aluminum alloy sheet material were monitored under various load histories. The cracks initiated from inclusion particle clusters or voids on the notch surface and generally grew as surface cracks. Tests were conducted under several constant-amplitude (stress ratios of -2, -1, 0, and 0.5) and spectrum (FALSTAFF and Gaussian) loading conditions at 3 stress levels each. Short crack growth was recorded using a plastic-replica technique. Over 250 edge-notched specimens were fatigue tested and nearly 950 cracks monitored by 12 participants from 9 countries. Long crack-growth rate data for cracks greater than 2 mm in length were obtained over a wide range in rates (10 to the -8 to 10 to the -1 mm/cycle) for all constant-amplitude loading conditions. Long crack-growth rate data for the FALSTAFF and Gaussian load sequences were also obtained.

Processing, structure, property and performance relationships for the thermal spray of the internal surface of aluminum cylinders

NASA Astrophysics Data System (ADS)

Cook, David James

The increased need for automotive weight reduction has necessitated the use of aluminum for engine blocks. Conventional aluminum alloys cannot survive the constant wear from a piston ring reciprocating on the surface. However, a wear resistant thermal spray coating can be applied on the internal surface of the cylinder bore, which has significant advantages over other available options. Thermal spray is a well-established process for depositing molten, semi-molten, or solid particles onto a substrate to form a protective coating. For this application, the two main challenges were obtaining good wear resistance, and achieving good adhesion. To design a system capable of producing a well-adhered, wear resistant coating for this high volume application it is necessary to identify the overall processing, structure, properties, and performance relationships. The results will demonstrate that very important relationships exist among particle characteristics, substrate conditions, and the properties of the final coating. However, it is the scientific studies to understand some of the process physics in these relationships that allow recognition of the critical processing conditions that need to be controlled to ensure a consistent, reliable thermal spray coating. In this investigation, it will be shown that the critical microstructural aspect of the coating that produced the required tribological properties was the presence of wuestite (FeO). It was found that by using a low carbon steel material with compressed air atomizing gas, it was possible to create an Fe/FeO structure that exhibited excellent tribological properties. This study will also show that traditional thermal spray surface preparation techniques were not ideal for this application, therefore a novel alternative approach was developed. The application of a flux to the aluminum surface prior to thermal spray promotes excellent bond strengths to non-roughened aluminum. Analysis will show that this flux strips the oxide from the aluminum and allows for chemical bonding of the NiAl coating to the aluminum via the formation of intermetallics. By developing processing, structure, property, and performance relationships for the full process, it was possible to design a complete coating process to succeed in this application. The determination of these relationships and the underlying process physics improves reliability and instills confidence in the process.

Graphene-Reinforced Aluminum Matrix Composites: A Review of Synthesis Methods and Properties

NASA Astrophysics Data System (ADS)

Chen, Fei; Gupta, Nikhil; Behera, Rakesh K.; Rohatgi, Pradeep K.

2018-06-01

Graphene-reinforced aluminum (Gr-Al) matrix nanocomposites (NCs) have attracted strong interest from both research and industry in high-performance weight-sensitive applications. Due to the vastly different bonding characteristics of the Al matrix (metallic) and graphene (in-plane covalent + inter-plane van der Waals), the graphene phase has a general tendency to agglomerate and phase separate in the metal matrix, which is detrimental for the mechanical and chemical properties of the composite. Thus, synthesis of Gr-Al NCs is extremely challenging. This review summarizes the different methods available to synthesize Gr-Al NCs and the resulting properties achieved in these NCs. Understanding the effect of processing parameters on the realized properties opens up the possibility of tailoring the synthesis methods to achieve the desired properties for a given application.

Metallization failures

NASA Technical Reports Server (NTRS)

Beatty, R.

1971-01-01

Metallization-related failure mechanisms were shown to be a major cause of integrated circuit failures under accelerated stress conditions, as well as in actual use under field operation. The integrated circuit industry is aware of the problem and is attempting to solve it in one of two ways: (1) better understanding of the aluminum system, which is the most widely used metallization material for silicon integrated circuits both as a single level and multilevel metallization, or (2) evaluating alternative metal systems. Aluminum metallization offers many advantages, but also has limitations particularly at elevated temperatures and high current densities. As an alternative, multilayer systems of the general form, silicon device-metal-inorganic insulator-metal, are being considered to produce large scale integrated arrays. The merits and restrictions of metallization systems in current usage and systems under development are defined.

Histologic effects of resurfacing lasers.

PubMed

Freedman, Joshua R; Greene, Ryan M; Green, Jeremy B

2014-02-01

By utilizing resurfacing lasers, physicians can significantly improve the appearance of sun-damaged skin, scars, and more. The carbon dioxide and erbium:yttrium-aluminum-garnet lasers were the first ablative resurfacing lasers to offer impressive results although these earlier treatments were associated with significant downtime. Later, nonablative resurfacing lasers such as the neodymium:yttrium-aluminum-garnet laser proved effective, after a series of treatments with less downtime, but with more modest results. The theory of fractional photothermolysis has revolutionized resurfacing laser technology by increasing the safety profile of the devices while delivering clinical efficacy. A review of the histologic and molecular consequences of the resurfacing laser-tissue interaction allows for a better understanding of the devices and their clinical effects. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Hysteresis in Lanthanide Aluminum Oxides Observed by Fast Pulse CV Measurement

PubMed Central

Zhao, Chun; Zhao, Ce Zhou; Lu, Qifeng; Yan, Xiaoyi; Taylor, Stephen; Chalker, Paul R.

2014-01-01

Oxide materials with large dielectric constants (so-called high-k dielectrics) have attracted much attention due to their potential use as gate dielectrics in Metal Oxide Semiconductor Field Effect Transistors (MOSFETs). A novel characterization (pulse capacitance-voltage) method was proposed in detail. The pulse capacitance-voltage technique was employed to characterize oxide traps of high-k dielectrics based on the Metal Oxide Semiconductor (MOS) capacitor structure. The variation of flat-band voltages of the MOS structure was observed and discussed accordingly. Some interesting trapping/detrapping results related to the lanthanide aluminum oxide traps were identified for possible application in Flash memory technology. After understanding the trapping/detrapping mechanism of the high-k oxides, a solid foundation was prepared for further exploration into charge-trapping non-volatile memory in the future. PMID:28788225

Graphene-Reinforced Aluminum Matrix Composites: A Review of Synthesis Methods and Properties

NASA Astrophysics Data System (ADS)

Chen, Fei; Gupta, Nikhil; Behera, Rakesh K.; Rohatgi, Pradeep K.

2018-03-01

Graphene-reinforced aluminum (Gr-Al) matrix nanocomposites (NCs) have attracted strong interest from both research and industry in high-performance weight-sensitive applications. Due to the vastly different bonding characteristics of the Al matrix (metallic) and graphene (in-plane covalent + inter-plane van der Waals), the graphene phase has a general tendency to agglomerate and phase separate in the metal matrix, which is detrimental for the mechanical and chemical properties of the composite. Thus, synthesis of Gr-Al NCs is extremely challenging. This review summarizes the different methods available to synthesize Gr-Al NCs and the resulting properties achieved in these NCs. Understanding the effect of processing parameters on the realized properties opens up the possibility of tailoring the synthesis methods to achieve the desired properties for a given application.

Thermal Impacts in Vibration-assisted Laser Deep Penetration Welding of Aluminum

NASA Astrophysics Data System (ADS)

Radel, T.

Mechanical vibrations affect the nucleation and grain growth conditions during welding. In order to understand the vibration-induced influences on the grain formation conditions in laser beam welding of aluminum the thermal impacts of simultaneously applied vibrations are analyzed in this study. Therefore, laser deep penetration welding at vibration frequencies between 0.5 kHz and 5 kHz is investigated. Besides full penetration, partial penetration experiments were carried out. The results show that the thermal and absorption efficiencies are not significantly affected by the applied excitation. The solidification time increases in case of applied excitation which is rather disadvantageous regarding grain refinement. Thus, mechanical-metallurgical and not thermal-metallurgical effects should be responsible for the change in grain nucleation and grain growth conditions in laser beam welding with simultaneously applied vibrations.

The role of aluminum in slow sand filtration.

PubMed

Weber-Shirk, Monroe L; Chan, Kwok Loon

2007-03-01

Engineering enhancement of slow sand filtration has been an enigma in large part because the mechanisms responsible for particle removal have not been well characterized. The presumed role of biological processes in the filter ripening process nearly precluded the possibility of enhancing filter performance since interventions to enhance biological activity would have required decreasing the quality of the influent water. In previous work, we documented that an acid soluble polymer controls filter performance. The new understanding that particle removal is controlled in large part by physical chemical mechanisms has expanded the possibilities of engineering slow sand filter performance. Herein, we explore the role of naturally occurring aluminum as a ripening agent for slow sand filters and the possibility of using a low dose of alum to improve filter performance or to ripen slow sand filters.

Brief Report: Understanding Intention to Be Physically Active and Physical Activity Behaviour in Adolescents from a Low Socio-Economic Status Background: An Application of the Theory of Planned Behaviour

ERIC Educational Resources Information Center

Duncan, Michael J.; Rivis, Amanda; Jordan, Caroline

2012-01-01

The aim of this brief report is to report on the utility of the Theory of Planned Behaviour (TPB) for predicting the physical activity intentions and behaviour of British adolescents from lower-than-average socio-economic backgrounds. A prospective questionnaire design was employed with 197, 13-14 year olds (76 males, 121 females). At time 1…

Low velocity impact of 6082-T6 aluminum plates

NASA Astrophysics Data System (ADS)

Mocian, Oana Alexandra; Constantinescu, Dan Mihai; Sandu, Marin; Sorohan, Ştefan

2018-02-01

The low velocity domain covers vehicle impacts, ship collisions and even accidentally tool drops. Even though more and more research is needed into these fields, most of the papers concerning impact problems focus on impact at medium and high velocities. Understanding the behavior of structures subjected to low velocity impact is of major importance when referring to impact resistance and damage tolerance. The paper presents an experimental and numerical investigation on the low velocity behavior of 6082-T6 aluminum plates. Impact tests were performed using an Instron Ceast 9340 drop-weight testing machine. In the experimental procedure, square plates were mounted on a circular support, fixed with a pneumatic clamping system and impacted with a hemispherical steel projectile. Specimens were impacted at constant weight and different impact velocities. The effect of different impact energies was investigated. The impact event was then simulated using the nonlinear finite element code LS_DYNA in order to determine the effect of strain rate upon the mechanical behavior of the aluminum plates. Moreover, in order to capture the exact behavior of the material, a special attention has been given to the selection of the correct material model and its parameters, which, in large extent, depend on the observed behavior of the aluminum plate during the test and the actual response of the plate under simulation. The numerical predictions are compared with the experimental observations and the applicability of the numerical model for further researches is analyzed.

Electrochemical corrosion and modeling studies of types 7075 and 2219 aluminum alloys in a nitric acid + ferric sulfate deoxidizer solution

NASA Astrophysics Data System (ADS)

Savas, Terence P.

The corrosion behavior of types 7075-T73 and 2219-T852 high strength aluminum alloys have been investigated in a HNO3 + Fe2(SO 4)3 solution. The materials are characterized in the time domain using the electrochemical noise resistance parameter (Rn) and in the frequency-domain using the spectral noise impedance parameter ( Rsn). The Rsn parameter is derived from an equivalent electrical circuit model that represents the corrosion test cell schematic used in the present study. These calculated parameters are correlated to each other, and to corresponding scanning electron microscopy (SEM) examinations of the corroded surfaces. In addition, energy dispersive spectroscopy (EDS) spectra are used in conjunction with SEM exams for particle mapping and identification. These constituent particles are characterized with respect to their size and composition and their effect on the localized corrosion mechanisms taking place. Pitting mechanisms are identified as 'circumferential' where the particles appeared noble with respect to the aluminum matrix and by 'selective dissolution' where they are anodic to the aluminum matrix. The electrochemical data are found to be in good agreement with the surface examinations. Specifically, the electrochemical parameters Rn and Rsn were consistent in predicting the corrosion resistance of 7075-T73 to be lower than for the 2219-T852 alloy. Other characteristic features used in understanding the corrosion mechanisms include the open circuit potential (OCP) and coupling-current time records.

Effect of Interfacial Reaction on the Mechanical Performance of Steel to Aluminum Dissimilar Ultrasonic Spot Welds

NASA Astrophysics Data System (ADS)

Xu, Lei; Wang, Li; Chen, Ying-Chun; Robson, Joe D.; Prangnell, Philip B.

2016-01-01

The early stages of formation of intermetallic compounds (IMC) have been investigated in dissimilar aluminum to steel welds, manufactured by high power (2.5 kW) ultrasonic spot welding (USW). To better understand the influence of alloy composition, welds were produced between a low-carbon steel (DC04) and two different aluminum alloys (6111 and 7055). The joint strengths were measured in lap shear tests and the formation and growth behavior of IMCs at the weld interface were characterized by electron microscopy, for welding times from 0.2 to 2.4 seconds. With the material combinations studied, the η (Fe2Al5) intermetallic phase was found to form first, very rapidly in the initial stage of welding, with a discontinuous island morphology. Continuous layers of η and then θ (FeAl3) phase were subsequently seen to develop on extending the welding time to greater than 0.7 second. The IMC layer formed in the DC04-AA7055 combination grew thicker than for the DC04-AA6111 welds, despite both weld sets having near identical thermal histories. Zinc was also found to be dissolved in the IMC phases when welding with the AA7055 alloy. After post-weld aging of the aluminum alloy, fracture in the lap shear tests always occurred along the joint interface; however, the DC04-AA6111 welds had higher fracture energy than the DC04-AA7055 combination.

Orbital fabrication of aluminum foam and apparatus therefore

NASA Technical Reports Server (NTRS)

Tucker, Dennis S. (Inventor)

2010-01-01

A process for producing foamed aluminum in space comprising the steps of: heating aluminum until it is molten; applying the force of gravity to the molten aluminum; injecting gas into the molten aluminum to produce molten foamed aluminum; and allowing the molten foamed aluminum to cool to below melting temperature. The apparatus for carrying out this invention comprises: a furnace which rotates to simulate the force of gravity and heats the aluminum until it is molten; a door on the furnace, which is opened for charging the aluminum into the furnace, closed for processing and opened again for removal of the foamed aluminum; a gas injection apparatus for injecting gas into the molten aluminum within the furnace; and an extraction apparatus adjacent the door for removing the foamed aluminum from the furnace.

Veterinary and Equine Science Students’ Interpretation of Horse Behaviour

PubMed Central

Gronqvist, Gabriella; Gee, Erica; Martinez, Audrey; Bolwell, Charlotte

2017-01-01

Simple summary We assessed first-year veterinary science and veterinary technology and undergraduate equine science students interpretation of expressive horse behaviours. Previous experience with horses appeared to influence the students’ perception of the horses’ behaviour. Qualitative assessments of horse behaviour may be a useful tool for assessing students’ knowledge of horse behaviour. Abstract Many veterinary and undergraduate equine science students have little previous horse handling experience and a poor understanding of horse behaviour; yet horses are one of the most unsafe animals with which veterinary students must work. It is essential for veterinary and equine students to learn how to interpret horse behaviour in order to understand demeanour and levels of arousal, and to optimise their own safety and the horses’ welfare. The study utilised a qualitative research approach to investigate veterinary science and veterinary technology and undergraduate equine science students’ interpretation of expressive behaviours shown by horses. The students (N = 127) were shown six short video clips and asked to select the most applicable terms, from a pre-determined list, to describe the behavioural expression of each individual horse. A wide variation of terms were selected by students and in some situations of distress, or situations that may be dangerous or lead to compromised welfare, apparently contradictory terms were also selected (happy or playful) by students with less experience with horses. Future studies should consider the use of Qualitative Behavioural Analysis (QBA) and free-choice profiling to investigate the range of terms used by students to describe the expressive demeanour and arousal levels of horses. PMID:28809810

Health behaviours of young mothers: Implications for health promotion and cancer prevention.

PubMed

Hackshaw-McGeagh, Lucy; Jamie, Kimberly; Beynon, Rhona; O'Neill, Roisin

2018-04-01

Evidence suggests that younger mothers engage in poorer health behaviours, resulting in increased cancer risk. We aimed to better understand the health behaviours of younger mothers and the factors that influence their lifestyle choices, in order to improve cancer prevention within this population. A multiple focus group, photo-elicitation-aided approach was used, in which young mothers ( n  = 27; aged 16-24 years) were provided with cameras and asked to capture 'a week in your life'. Photographs were developed and participants invited to an initial focus group where photographs were used to elicit discussion, exploring participants' health behaviours. Data were thematically analysed particularly identifying themes relating to barriers and facilitators of positive health behaviours. Participants were later invited to participate in a second focus group, to explore and validate identified themes further. Themes emerged from the data relating to (1) the mothers' personal perceptions of health, (2) health-related behaviours and (3) beliefs about cancer and its causes. Barriers to positive health behaviours included a lack of money, childcare and cookery skills; facilitators included the social media, commercial weight loss programmes and local community organisations. Study findings provide insight into the health behaviours and life choices of young mothers. They help illustrate health perceptions in relation to cancer risk, providing an understanding of how their daily routine and circumstance influence young women's decisions and lifestyle behaviour choices and highlighting barriers to, and facilitators of, positive health behaviours. Data hold potential to inform future health-related research among young mothers, particularly relating to cancer prevention intervention.

Methods to Prepare Aluminum Salt-Adjuvanted Vaccines.

PubMed

Thakkar, Sachin G; Cui, Zhengrong

2017-01-01

Many human vaccines contain certain insoluble aluminum salts such as aluminum oxyhydroxide and aluminum hydroxyphosphate as vaccine adjuvants to boost the immunogenicity of the vaccines. Aluminum salts have been used as vaccine adjuvants for decades and have an established, favorable safety profile. However, preparing aluminum salts and aluminum salt-adjuvanted vaccines in a consistent manner remains challenging. This chapter discusses methods to prepare aluminum salts and aluminum salt-adjuvanted vaccines, factors to consider during preparation, and methods to characterize the vaccines after preparation.

An InDel in the promoter of Al-activated malate transporter 9 selected during tomato domestication determines fruit malate content and aluminum tolerance

USDA-ARS?s Scientific Manuscript database

Deciphering the mechanism of malate accumulation in plants would contribute to a greater understanding of plant chemistry, which has implications for improving flavor quality in crop species and enhancing human health benefits. However, the regulation of malate metabolism is poorly understood in cro...

Compatibility of Anti-Wear Additives with Non-Ferrous Engine Bearing Alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qu, Jun; Zhou, Yan

Investigate the compatibility of engine lubricant antiwear (AW) additives, specifically conventional zinc dialkyldithiophosphate (ZDDP) and newly developed ionic liquids (ILs), with selected non-ferrous engine bearing alloys, specifically aluminum and bronze alloys that are commonly used in connecting rod end journal bearings and bushings, to gain fundamental understanding to guide future development of engine lubricants

Understanding and influencing behaviour change by farmers to improve water quality.

PubMed

Blackstock, K L; Ingram, J; Burton, R; Brown, K M; Slee, B

2010-11-01

Diffuse pollution from agriculture remains a significant challenge to many countries seeking to improve and protect their water environments. This paper reviews literature relating to the provision of information and advice as a mechanism to encourage farmers to mitigate diffuse pollution. The paper presents findings from a literature review on influencing farmer behaviour and synthesizes three main areas of literature: psychological and institutional theories of behaviour; shifts in the approach to delivery of advice (from knowledge transfer to knowledge exchange); and the increased interest in heterogeneous farming cultures. These three areas interconnect in helping to understand how best to influence farmer behaviour in order to mitigate diffuse pollution. They are, however, literatures that are rarely cited in the water management arena. The paper highlights the contribution of the 'cultural turn' taken by rural social scientists in helping to understand collective and individual voluntary behaviour. The paper explores how these literatures can contribute to the existing understanding of water management in the agricultural context, particularly: when farmers question the scientific evidence; when there are increased calls for collaborative planning and management; and when there is increased value placed on information as a business commodity. The paper also highlights where there are still gaps in knowledge that need to be filled by future research - possibly in partnership with farmers themselves. Whilst information and advice has long been seen as an important part of diffuse pollution control, increasing climate variability that will require farmers to practice adaptive management is likely to make these mechanisms even more important. Copyright © 2009 Elsevier B.V. All rights reserved.

Coordination between Apoplastic and Symplastic Detoxification Confers Plant Aluminum Resistance1[C][W][OPEN

PubMed Central

Zhu, Xiao Fang; Lei, Gui Jie; Wang, Zhi Wei; Shi, Yuan Zhi; Braam, Janet; Li, Gui Xin; Zheng, Shao Jian

2013-01-01

Whether aluminum toxicity is an apoplastic or symplastic phenomenon is still a matter of debate. Here, we found that three auxin overproducing mutants, yucca, the recessive mutant superroot2, and superroot1 had increased aluminum sensitivity, while a transfer DNA insertion mutant, xyloglucan endotransglucosylase/hydrolases15 (xth15), showed enhanced aluminum resistance, accompanied by low endogenous indole-3-acetic acid levels, implying that auxin may be involved in plant responses to aluminum stress. We used yucca and xth15 mutants for further study. The two mutants accumulated similar total aluminum in roots and had significantly reduced cell wall aluminum and increased symplastic aluminum content relative to the wild-type ecotype Columbia, indicating that altered aluminum levels in the symplast or cell wall cannot fully explain the differential aluminum resistance of these two mutants. The expression of Al sensitive1 (ALS1), a gene that functions in aluminum redistribution between the cytoplasm and vacuole and contributes to symplastic aluminum detoxification, was less abundant in yucca and more abundant in xth15 than the wild type, consistent with possible ALS1 function conferring altered aluminum sensitivity in the two mutants. Consistent with the idea that xth15 can tolerate more symplastic aluminum because of possible ALS1 targeting to the vacuole, morin staining of yucca root tip sections showed more aluminum accumulation in the cytosol than in the wild type, and xth15 showed reduced morin staining of cytosolic aluminum, even though yucca and xth15 had similar overall symplastic aluminum content. Exogenous application of an active auxin analog, naphthylacetic acid, to the wild type mimicked the aluminum sensitivity and distribution phenotypes of yucca, verifying that auxin may regulate aluminum distribution in cells. Together, these data demonstrate that auxin negatively regulates aluminum tolerance through altering ALS1 expression and aluminum distribution within plant cells, and plants must coordinate exclusion and internal detoxification to reduce aluminum toxicity effectively. PMID:23776189

Modelling Parasite Transmission in a Grazing System: The Importance of Host Behaviour and Immunity

PubMed Central

Fox, Naomi J.; Marion, Glenn; Davidson, Ross S.; White, Piran C. L.; Hutchings, Michael R.

2013-01-01

Parasitic helminths present one of the most pervasive challenges to grazing herbivores. Many macro-parasite transmission models focus on host physiological defence strategies, omitting more complex interactions between hosts and their environments. This work represents the first model that integrates both the behavioural and physiological elements of gastro-intestinal nematode transmission dynamics in a managed grazing system. A spatially explicit, individual-based, stochastic model is developed, that incorporates both the hosts’ immunological responses to parasitism, and key grazing behaviours including faecal avoidance. The results demonstrate that grazing behaviour affects both the timing and intensity of parasite outbreaks, through generating spatial heterogeneity in parasite risk and nutritional resources, and changing the timing of exposure to the parasites’ free-living stages. The influence of grazing behaviour varies with the host-parasite combination, dependent on the development times of different parasite species and variations in host immune response. Our outputs include the counterintuitive finding that under certain conditions perceived parasite avoidance behaviours (faecal avoidance) can increase parasite risk, for certain host-parasite combinations. Through incorporating the two-way interaction between infection dynamics and grazing behaviour, the potential benefits of parasite-induced anorexia are also demonstrated. Hosts with phenotypic plasticity in grazing behaviour, that make grazing decisions dependent on current parasite burden, can reduce infection with minimal loss of intake over the grazing season. This paper explores how both host behaviours and immunity influence macro-parasite transmission in a spatially and temporally heterogeneous environment. The magnitude and timing of parasite outbreaks is influenced by host immunity and behaviour, and the interactions between them; the incorporation of both regulatory processes is required to fully understand transmission dynamics. Understanding of both physiological and behavioural defence strategies will aid the development of novel approaches for control. PMID:24223133

Effect of drugs of abuse on social behaviour: a review of animal models.

PubMed

Blanco-Gandía, Maria C; Mateos-García, Ana; García-Pardo, Maria P; Montagud-Romero, Sandra; Rodríguez-Arias, Marta; Miñarro, José; Aguilar, María A

2015-09-01

Social behaviour is disturbed in many substance abuse and psychiatric disorders. Given the consensus that social behaviours of lower mammals may help to understand some human emotional reactions, the aim of the present work was to provide an up-to-date review of studies on the changes in social behaviour induced by drugs of abuse. Various animal models have been used to study the relationship between drugs of abuse and social behaviour. Herein, we describe the effects of different substances of abuse on the three most commonly used animal models of social behaviour: the social play test, the social interaction test and the resident-intruder paradigm. The first is the most widely used test to assess adolescent behaviour in rodents, the second is generally used to evaluate a wide repertoire of behaviours in adulthood and the latter is specific to aggressive behaviour. Throughout the review we will explore the most relevant studies carried out to date to evaluate the effects of alcohol, cocaine, opioids, 3,4-methylenedioxymethamphetamine (MDMA), cannabinoids, nicotine and other drugs of abuse on these three paradigms, taking into account the influence of different variables, such as social history, age and type of exposure. Drugs of diverse pharmacological classes induce alterations in social behaviour, although they can be contrasting depending on several factors (drug, individual differences and environmental conditions). Ethanol and nicotine increase social interaction at low doses but reduce it at high doses. Psychostimulants, MDMA and cannabinoids reduce social interaction, whereas opiates increase it. Ethanol and psychostimulants enhance aggression, whereas MDMA, opiates, cannabinoids and nicotine reduce it. Prenatal drug exposure alters social behaviour, whereas drug withdrawal decreases sociability and enhances aggression. As a whole, this evidence has improved our understanding of the social dimension of drug addiction.

Understanding the Effects of One's Actions upon Hidden Objects and the Development of Search Behaviour in 7-Month-Old Infants

ERIC Educational Resources Information Center

O'Connor, Richard J.; Russell, James

2015-01-01

Infants' understanding of how their actions affect the visibility of hidden objects may be a crucial aspect of the development of search behaviour. To investigate this possibility, 7-month-old infants took part in a two-day training study. At the start of the first session, and at the end of the second, all infants performed a search task with a…

A systematic analysis of the Braitenberg vehicle 2b for point-like stimulus sources.

PubMed

Rañó, Iñaki

2012-09-01

Braitenberg vehicles have been used experimentally for decades in robotics with limited empirical understanding. This paper presents the first mathematical model of the vehicle 2b, displaying so-called aggression behaviour, and analyses the possible trajectories for point-like smooth stimulus sources. This sensory-motor steering control mechanism is used to implement biologically grounded target approach, target-seeking or obstacle-avoidance behaviour. However, the analysis of the resulting model reveals that complex and unexpected trajectories can result even for point-like stimuli. We also prove how the implementation of the controller and the vehicle morphology interact to affect the behaviour of the vehicle. This work provides a better understanding of Braitenberg vehicle 2b, explains experimental results and paves the way for a formally grounded application on robotics as well as for a new way of understanding target seeking in biology.

Is Sustainability Knowledge Half the Battle? An Examination of Sustainability Knowledge, Attitudes, Norms, and Efficacy to Understand Sustainable Behaviours

ERIC Educational Resources Information Center

Heeren, Alexander John; Singh, Ajay S.; Zwickle, Adam; Koontz, Tomas M.; Slagle, Kristina M.; McCreery, Anna C.

2016-01-01

Purpose: The purpose of this study is to examine the relationship of sustainability knowledge to pro-environmental behaviour. A common misperception is that unsustainable behaviours are largely driven by a lack of knowledge of the underlying societal costs and the contributing factors leading to environmental degradation. Such a perception assumes…

Brief Report: The Theory of Planned Behaviour Applied to Physical Activity in Young People Who Smoke

ERIC Educational Resources Information Center

Everson, Emma S.; Daley, Amanda J.; Ussher, Michael

2007-01-01

It has been hypothesised that physical activity may be useful as a smoking cessation intervention for young adults. In order to inform such interventions, this study evaluated the theory of planned behaviour (TPB) for understanding physical activity behaviour in young smokers. Regular smokers aged 16-19 years (N=124), self-reported physical…

Event-based analysis of free-living behaviour.

PubMed

Granat, Malcolm H

2012-11-01

The quantification of free-living physical activities is important in understanding how physical activity and sedentary behaviour impact on health and also on how interventions might modify free-living behaviour to enhance health. Quantification, and the terminology used, has in many ways been determined by the choice of measurement technique. The inter-related issues around measurement devices and terminology used are explored. This paper proposes a terminology and a systematic approach for the analysis of free-living activity information using event-based activity data. The event-based approach uses a flexible hierarchical classification of events and, dependent on the research question, analysis can then be undertaken on a selection of these events. The quantification of free-living behaviour is therefore the result of the analysis on the patterns of these chosen events. The application of this approach is illustrated with results from a range of published studies by our group showing how event-based analysis provides a flexible yet robust method of addressing the research question(s) and provides a deeper insight into free-living behaviour. It is proposed that it is through event-based analysis we can more clearly understand how behaviour is related to health and also how we can produce more relevant outcome measures.

A progress report on seismic model studies

USGS Publications Warehouse

Healy, J.H.; Mangan, G.B.

1963-01-01

The value of seismic-model studies as an aid to understanding wave propagation in the Earth's crust was recognized by early investigators (Tatel and Tuve, 1955). Preliminary model results were very promising, but progress in model seismology has been restricted by two problems: (1) difficulties in the development of models with continuously variable velocity-depth functions, and (2) difficulties in the construction of models of adequate size to provide a meaningful wave-length to layer-thickness ratio. The problem of a continuously variable velocity-depth function has been partly solved by a technique using two-dimensional plate models constructed by laminating plastic to aluminum, so that the ratio of plastic to aluminum controls the velocity-depth function (Healy and Press, 1960). These techniques provide a continuously variable velocity-depth function, but it is not possible to construct such models large enough to study short-period wave propagation in the crust. This report describes improvements in our ability to machine large models. Two types of models are being used: one is a cylindrical aluminum tube machined on a lathe, and the other is a large plate machined on a precision planer. Both of these modeling techniques give promising results and are a significant improvement over earlier efforts.

Atomic Layer Epitaxy of Aluminum Nitride: Unraveling the Connection between Hydrogen Plasma and Carbon Contamination.

PubMed

Erwin, Steven C; Lyons, John L

2018-06-13

Atomistic control over the growth of semiconductor thin films, such as aluminum nitride, is a long-sought goal in materials physics. One promising approach is plasma-assisted atomic layer epitaxy, in which separate reactant precursors are employed to grow the cation and anion layers in alternating deposition steps. The use of a plasma during the growth-most often a hydrogen plasma-is now routine and generally considered critical, but the precise role of the plasma is not well-understood. We propose a theoretical atomistic model and elucidate its consequences using analytical rate equations, density functional theory, and kinetic Monte Carlo statistical simulations. We show that using a plasma has two important consequences, one beneficial and one detrimental. The plasma produces atomic hydrogen in the gas phase, which is important for removing methyl radicals left over from the aluminum precursor molecules. However, atomic hydrogen also leads to atomic carbon on the surface and, moreover, opens a channel for trapping these carbon atoms as impurities in the subsurface region, where they remain as unwanted contaminants. Understanding this dual role leads us to propose a solution for the carbon contamination problem which leaves the main benefit of the plasma largely unaffected.

Ion Heating of Plasma to Warm Dense Matter Conditions for the study of High-Z/Low-Z Mixing

NASA Astrophysics Data System (ADS)

Roycroft, R.; Dyer, G. M.; McCary, E.; Wagner, C.; Bernstein, A.; Ditmire, T.; Albright, B. J.; Fernandez, J. C.; Bang, W.; Bradley, P. A.; Gautier, D. C.; Hamilton, C. E.; Palaniyappan, S.; Santiago Cordoba, M. A.; Vold, E. L.; Yin, L.; Hegelich, B. M.

2016-10-01

The evolution of the interface between a light and heavy material isochorically heated to warm dense matter conditions is important to the understanding of electrostatic effects on the hydrodynamic models of fluid mixing. In recent experiments at the Trident laser facility, the target, containing a high Z and a low Z material, is heated to around 1eV by laser accelerated aluminum ions. In preparation for continued mixing experiments, we have recently heated aluminum to 20eV by laser accelerated protons on the Texas Petawatt Laser. We fielded a streaked optical pyrometer to measure surface temperature. The pyrometer images the rear surface of a heated target on a sub-nanosecond timescale with 400nm blackbody emissions. This poster presents the details of the experimental setup and pyrometer design, as well as results of ion and proton heating of aluminum targets, and ion heating of high-Z/low-Z integrated targets. Supported by NNSA cooperative agreement DE-NA0002008, the DoE through the LANL LDRD program, the DARPA PULSE program (12-63- PULSE-FP014), and the Air Force Office of Scientific Research (FA9550-14-1-0045).

Complete mitochondrial genome of the aluminum-tolerant fungus Rhodotorula taiwanensis RS1 and comparative analysis of Basidiomycota mitochondrial genomes.

PubMed

Zhao, Xue Qiang; Aizawa, Tomoko; Schneider, Jessica; Wang, Chao; Shen, Ren Fang; Sunairi, Michio

2013-04-01

The complete mitochondrial genome of Rhodotorula taiwanensis RS1, an aluminum-tolerant Basidiomycota fungus, was determined and compared with the known mitochondrial genomes of 12 Basidiomycota species. The mitochondrial genome of R. taiwanensis RS1 is a circular DNA molecule of 40,392 bp and encodes the typical 15 mitochondrial proteins, 23 tRNAs, and small and large rRNAs as well as 10 intronic open reading frames. These genes are apparently transcribed in two directions and do not show syntenies in gene order with other investigated Basidiomycota species. The average G+C content (41%) of the mitochondrial genome of R. taiwanensis RS1 is the highest among the Basidiomycota species. Two introns were detected in the sequence of the atp9 gene of R. taiwanensis RS1, but not in that of other Basidiomycota species. Rhodotorula taiwanensis is the first species of the genus Rhodotorula whose full mitochondrial genome has been sequenced; and the data presented here supply valuable information for understanding the evolution of fungal mitochondrial genomes and researching the mechanism of aluminum tolerance in microorganisms. © 2013 The Authors. Published by Blackwell Publishing Ltd.

Aluminum exclusion and aluminum tolerance in woody plants.

PubMed

Brunner, Ivano; Sperisen, Christoph

2013-01-01

The aluminum (Al) cation Al(3) (+) is highly rhizotoxic and is a major stress factor to plants on acid soils, which cover large areas of tropical and boreal regions. Many woody plant species are native to acid soils and are well adapted to high Al(3) (+) conditions. In tropical regions, both woody Al accumulator and non-Al accumulator plants occur, whereas in boreal regions woody plants are non-Al accumulators. The mechanisms of these adaptations can be divided into those that facilitate the exclusion of Al(3) (+) from root cells (exclusion mechanisms) and those that enable plants to tolerate Al(3) (+) once it has entered the root and shoot symplast (internal tolerance mechanisms). The biochemical and molecular basis of these mechanisms have been intensively studied in several crop plants and the model plant Arabidopsis. In this review, we examine the current understanding of Al(3) (+) exclusion and tolerance mechanisms from woody plants. In addition, we discuss the ecology of woody non-Al accumulator and Al accumulator plants, and present examples of Al(3) (+) adaptations in woody plant populations. This paper complements previous reviews focusing on crop plants and provides insights into evolutionary processes operating in plant communities that are widespread on acid soils.

Dynamic behaviour of a rolling tyre: Experimental and numerical analyses

NASA Astrophysics Data System (ADS)

Gonzalez Diaz, Cristobal; Kindt, Peter; Middelberg, Jason; Vercammen, Stijn; Thiry, Christophe; Close, Roland; Leyssens, Jan

2016-03-01

Based on the results of experimental and numerical analyses, the effect of rotation on the tyre dynamic behaviour is investigated. Better understanding of these effects will further improve the ability to control and optimize the noise and vibrations that result from the interaction between the road surface and the rolling tyre. Therefore, more understanding in the complex tyre dynamic properties will contribute to develop tyre design strategies to lower the tyre/road noise while less affecting other tyre performances. The presented work is performed in the framework of the European industry-academia project TIRE-DYN, with partners Goodyear, Katholieke Universiteit Leuven and LMS International. The effect of rotation on the tyre dynamic behaviour is quantified for different operating conditions of the tyre, such as load, air pressure and rotation speed. By means of experimental and numerical analyses, the effects of rotation on the tyre dynamic behaviour are studied.

The principles of collective animal behaviour

PubMed Central

Sumpter, D.J.T

2005-01-01

In recent years, the concept of self-organization has been used to understand collective behaviour of animals. The central tenet of self-organization is that simple repeated interactions between individuals can produce complex adaptive patterns at the level of the group. Inspiration comes from patterns seen in physical systems, such as spiralling chemical waves, which arise without complexity at the level of the individual units of which the system is composed. The suggestion is that biological structures such as termite mounds, ant trail networks and even human crowds can be explained in terms of repeated interactions between the animals and their environment, without invoking individual complexity. Here, I review cases in which the self-organization approach has been successful in explaining collective behaviour of animal groups and societies. Ant pheromone trail networks, aggregation of cockroaches, the applause of opera audiences and the migration of fish schools have all been accurately described in terms of individuals following simple sets of rules. Unlike the simple units composing physical systems, however, animals are themselves complex entities, and other examples of collective behaviour, such as honey bee foraging with its myriad of dance signals and behavioural cues, cannot be fully understood in terms of simple individuals alone. I argue that the key to understanding collective behaviour lies in identifying the principles of the behavioural algorithms followed by individual animals and of how information flows between the animals. These principles, such as positive feedback, response thresholds and individual integrity, are repeatedly observed in very different animal societies. The future of collective behaviour research lies in classifying these principles, establishing the properties they produce at a group level and asking why they have evolved in so many different and distinct natural systems. Ultimately, this research could inform not only our understanding of animal societies, but also the principles by which we organize our own society. PMID:16553306

The principles of collective animal behaviour.

PubMed

Sumpter, D J T

2006-01-29

In recent years, the concept of self-organization has been used to understand collective behaviour of animals. The central tenet of self-organization is that simple repeated interactions between individuals can produce complex adaptive patterns at the level of the group. Inspiration comes from patterns seen in physical systems, such as spiralling chemical waves, which arise without complexity at the level of the individual units of which the system is composed. The suggestion is that biological structures such as termite mounds, ant trail networks and even human crowds can be explained in terms of repeated interactions between the animals and their environment, without invoking individual complexity. Here, I review cases in which the self-organization approach has been successful in explaining collective behaviour of animal groups and societies. Ant pheromone trail networks, aggregation of cockroaches, the applause of opera audiences and the migration of fish schools have all been accurately described in terms of individuals following simple sets of rules. Unlike the simple units composing physical systems, however, animals are themselves complex entities, and other examples of collective behaviour, such as honey bee foraging with its myriad of dance signals and behavioural cues, cannot be fully understood in terms of simple individuals alone. I argue that the key to understanding collective behaviour lies in identifying the principles of the behavioural algorithms followed by individual animals and of how information flows between the animals. These principles, such as positive feedback, response thresholds and individual integrity, are repeatedly observed in very different animal societies. The future of collective behaviour research lies in classifying these principles, establishing the properties they produce at a group level and asking why they have evolved in so many different and distinct natural systems. Ultimately, this research could inform not only our understanding of animal societies, but also the principles by which we organize our own society.

Understanding determinants of nutrition, physical activity and quality of life among older adults: the Wellbeing, Eating and Exercise for a Long Life (WELL) study

PubMed Central

2012-01-01

Background Nutrition and physical activity are major determinants of health and quality of life; however, there exists little research focusing on determinants of these behaviours in older adults. This is important, since just as these behaviours vary according to subpopulation, it is likely that the determinants also vary. An understanding of the modifiable determinants of nutrition and physical activity behaviours among older adults to take into account the specific life-stage context is required in order to develop effective interventions to promote health and well-being and prevent chronic disease and improve quality of life. Methods The aim of this work is to identify how intrapersonal, social and environmental factors influence nutrition and physical activity behaviours among older adults living in urban and rural areas. This study is a cohort study of adults aged 55-65 years across urban and rural Victoria, Australia. Participants completed questionnaires at baseline in 2010 and will complete follow-up questionnaires in 2012 and 2014. Self-report questionnaires will be used to assess outcomes such as food intake, physical activity and sedentary behaviours, anthropometry and quality of life. Explanatory variables include socioeconomic position, and measures of the three levels of influence on older adults’ nutrition and physical activity behaviours (intrapersonal, social and perceived environmental influences). Discussion Obesity and its determinant behaviours, physical inactivity and poor diet are major public health concerns and are significant determinants of the quality of life among the ageing population. There is a critical need for a better understanding of the determinants of nutrition and physical activity in this important target group. This research will provide evidence for the development of effective policies and programs to promote and support increased physical activity and healthy eating behaviours among older adults. PMID:22966959

Creatures of habit: accounting for the role of habit in implementation research on clinical behaviour change

PubMed Central

2012-01-01

Background Social cognitive theories on behaviour change are increasingly being used to understand and predict healthcare professionals’ intentions and clinical behaviours. Although these theories offer important insights into how new behaviours are initiated, they provide an incomplete account of how changes in clinical practice occur by failing to consider the role of cue-contingent habits. This article contributes to better understanding of the role of habits in clinical practice and how improved effectiveness of behavioural strategies in implementation research might be achieved. Discussion Habit is behaviour that has been repeated until it has become more or less automatic, enacted without purposeful thinking, largely without any sense of awareness. The process of forming habits occurs through a gradual shift in cognitive control from intentional to automatic processes. As behaviour is repeated in the same context, the control of behaviour gradually shifts from being internally guided (e.g., beliefs, attitudes, and intention) to being triggered by situational or contextual cues. Much clinical practice occurs in stable healthcare contexts and can be assumed to be habitual. Empirical findings in various fields suggest that behaviours that are repeated in constant contexts are difficult to change. Hence, interventions that focus on changing the context that maintains those habits have a greater probability of success. Some sort of contextual disturbance provides a window of opportunity in which a behaviour is more likely to be deliberately considered. Forming desired habits requires behaviour to be carried out repeatedly in the presence of the same contextual cues. Summary Social cognitive theories provide insight into how humans analytically process information and carefully plan actions, but their utility is more limited when it comes to explaining repeated behaviours that do not require such an ongoing contemplative decisional process. However, despite a growing interest in applying behavioural theory in interventions to change clinical practice, the potential importance of habit has not been explored in implementation research. PMID:22682656

Eusocial insects as emerging models for behavioural epigenetics.

PubMed

Yan, Hua; Simola, Daniel F; Bonasio, Roberto; Liebig, Jürgen; Berger, Shelley L; Reinberg, Danny

2014-10-01

Understanding the molecular basis of how behavioural states are established, maintained and altered by environmental cues is an area of considerable and growing interest. Epigenetic processes, including methylation of DNA and post-translational modification of histones, dynamically modulate activity-dependent gene expression in neurons and can therefore have important regulatory roles in shaping behavioural responses to environmental cues. Several eusocial insect species - with their unique displays of behavioural plasticity due to age, morphology and social context - have emerged as models to investigate the genetic and epigenetic underpinnings of animal social behaviour. This Review summarizes recent studies in the epigenetics of social behaviour and offers perspectives on emerging trends and prospects for establishing genetic tools in eusocial insects.

Evolutionary learning processes as the foundation for behaviour change.

PubMed

Crutzen, Rik; Peters, Gjalt-Jorn Ygram

2018-03-01

We argue that the active ingredients of behaviour change interventions, often called behaviour change methods (BCMs) or techniques (BCTs), can usefully be placed on a dimension of psychological aggregation. We introduce evolutionary learning processes (ELPs) as fundamental building blocks that are on a lower level of psychological aggregation than BCMs/BCTs. A better understanding of ELPs is useful to select the appropriate BCMs/BCTs to target determinants of behaviour, or vice versa, to identify potential determinants targeted by a given BCM/BCT, and to optimally translate them into practical applications. Using these insights during intervention development may increase the likelihood of developing effective interventions - both in terms of behaviour change as well as maintenance of behaviour change.

Behavioural hypervolumes of spider communities predict community performance and disbandment

PubMed Central

Sih, Andrew; DiRienzo, Nicholas; Pinter-Wollman, Noa

2016-01-01

Trait-based ecology argues that an understanding of the traits of interactors can enhance the predictability of ecological outcomes. We examine here whether the multidimensional behavioural-trait diversity of communities influences community performance and stability in situ. We created experimental communities of web-building spiders, each with an identical species composition. Communities contained one individual of each of five different species. Prior to establishing these communities in the field, we examined three behavioural traits for each individual spider. These behavioural measures allowed us to estimate community-wide behavioural diversity, as inferred by the multidimensional behavioural volume occupied by the entire community. Communities that occupied a larger region of behavioural-trait space (i.e. where spiders differed more from each other behaviourally) gained more mass and were less likely to disband. Thus, there is a community-wide benefit to multidimensional behavioural diversity in this system that might translate to other multispecies assemblages. PMID:27974515

Practitioners' experiences of adolescent suicidal behaviour in peer groups.

PubMed

Briggs, S; Slater, T; Bowley, J

2017-06-01

WHAT IS KNOWN ON THE SUBJECT?: Group suicidal behaviour can be devastating for all concerned. There is an absence of research on adolescent suicidal group behaviour. The perspectives of practitioners' experiences of these groups are largely lacking from research literature. WHAT THIS PAPER ADDS TO EXISTING KNOWLEDGE?: Practitioners work regularly with suicidal behaviour in adolescent peer groups. Practitioners identify peer relationships in groups as complex, including elements that are both suicide encouraging and preventing. Practitioners identify a range of ways in which young people become involved in suicidal behaviour in groups, including indirectly through risk taking and care-seeking as well as directly suicidal or self-harming. WHAT ARE THE IMPLICATIONS FOR PRACTICE?: Assessments of young people should routinely include a focus on the qualities of peer relations, including those in the online/digital realm. Assessments and interventions need to consider the complexity of group relationships and roles, and the multiplicity of factors that can contribute to suicidal behaviour in groups. Interventions that sustain therapeutic connectedness are helpful for taking dynamic/fluctuating risks into account. Introduction Group suicidal behaviour by young people can have harmful effects; it may be increasing, influenced by online media and reported increasing self-harm rates; new knowledge and understanding to inform interventions is required. Aim To explore how practitioners experience group suicidal behaviour amongst adolescents, how they assess risks/needs, and how these insights inform understanding about these groups. Method Ten practitioners, including Mental Health Nurses, were interviewed in one multidisciplinary CAMHS, in England. Data analysis was by Thematic Analysis (Braun & Clarke 2006). Results Participants described frequently working with suicidal groups. Roles in groups include suicide encouraging and preventing. Practitioners identify risky and protective connections between young people, online and offline. Clinical tensions include living with suicidal risks, emotional and positional challenges, and getting to grips with digital media. Discussion Peer groups appear to have a larger role in adolescent suicide than recognized to date. Practitioners need to assess young people's roles in groups, their diverse motivations and to understand constantly changing digital media. Implications for practice Assessments of suicide risk for young people should routinely include focus on peer relations including the online/digital realm. Maintaining relationships with vulnerable young people facilitates managing fluctuating risks and understanding different group dynamics. © 2017 John Wiley & Sons Ltd.

Using Photovoice as a Community Based Participatory Research Tool for Changing Water, Sanitation, and Hygiene Behaviours in Usoma, Kenya.

PubMed

Bisung, Elijah; Elliott, Susan J; Abudho, Bernard; Karanja, Diana M; Schuster-Wallace, Corinne J

2015-01-01

Recent years have witnessed an increase in the use of community based participatory research (CBPR) tools for understanding environment and health issues and facilitating social action. This paper explores the application and utility of photovoice for understanding water, sanitation, and hygiene (WASH) behaviours and catalysing community led solutions to change behaviours. Between June and August 2013, photovoice was conducted with eight (8) women in Usoma, a lakeshore community in Western Kenya with a follow-up community meeting (baraza) in May 2014 to discuss findings with the community members and government officials. In the first part of the study, photovoice one-on-one interviews were used to explore local perceptions and practices around water-health linkages and how the ecological and socio-political environment shapes these perceptions and practices. This paper, which is the second component of the study, uses photovoice group discussions to explore participants' experiences with and (re)action to the photographs and the photovoice project. The findings illustrate that photovoice was an effective CBPR methodology for understanding behaviours, creating awareness, facilitating collective action, and engaging with local government and local health officials at the water-health nexus.

Manipulating neural activity in physiologically classified neurons: triumphs and challenges

PubMed Central

Gore, Felicity; Schwartz, Edmund C.; Salzman, C. Daniel

2015-01-01

Understanding brain function requires knowing both how neural activity encodes information and how this activity generates appropriate responses. Electrophysiological, imaging and immediate early gene immunostaining studies have been instrumental in identifying and characterizing neurons that respond to different sensory stimuli, events and motor actions. Here we highlight approaches that have manipulated the activity of physiologically classified neurons to determine their role in the generation of behavioural responses. Previous experiments have often exploited the functional architecture observed in many cortical areas, where clusters of neurons share response properties. However, many brain structures do not exhibit such functional architecture. Instead, neurons with different response properties are anatomically intermingled. Emerging genetic approaches have enabled the identification and manipulation of neurons that respond to specific stimuli despite the lack of discernable anatomical organization. These approaches have advanced understanding of the circuits mediating sensory perception, learning and memory, and the generation of behavioural responses by providing causal evidence linking neural response properties to appropriate behavioural output. However, significant challenges remain for understanding cognitive processes that are probably mediated by neurons with more complex physiological response properties. Currently available strategies may prove inadequate for determining how activity in these neurons is causally related to cognitive behaviour. PMID:26240431

Brain evolution by brain pathway duplication

PubMed Central

Chakraborty, Mukta; Jarvis, Erich D.

2015-01-01

Understanding the mechanisms of evolution of brain pathways for complex behaviours is still in its infancy. Making further advances requires a deeper understanding of brain homologies, novelties and analogies. It also requires an understanding of how adaptive genetic modifications lead to restructuring of the brain. Recent advances in genomic and molecular biology techniques applied to brain research have provided exciting insights into how complex behaviours are shaped by selection of novel brain pathways and functions of the nervous system. Here, we review and further develop some insights to a new hypothesis on one mechanism that may contribute to nervous system evolution, in particular by brain pathway duplication. Like gene duplication, we propose that whole brain pathways can duplicate and the duplicated pathway diverge to take on new functions. We suggest that one mechanism of brain pathway duplication could be through gene duplication, although other mechanisms are possible. We focus on brain pathways for vocal learning and spoken language in song-learning birds and humans as example systems. This view presents a new framework for future research in our understanding of brain evolution and novel behavioural traits. PMID:26554045

Behavioural pharmacology: 40+ years of progress, with a focus on glutamate receptors and cognition

PubMed Central

Robbins, Trevor W.; Murphy, Emily R.

2006-01-01

Behavioural pharmacology is an interdisciplinary field at the intersection of several research areas that ultimately lead to the development of drugs for clinical use and build understanding of how brain functions enable cognition and behaviour. In this article, the development of behavioural pharmacology in the UK is briefly surveyed, and the current status and success of the field is highlighted by the progress in our understanding of learning and memory that has resulted from discoveries in glutamate receptor pharmacology allied to theoretical and methodological advances in behavioural neuroscience. We describe the original breakthrough in terms of the role of NMDA receptors in hippocampal-mediated spatial learning and long-term potentiation, and review recent advances that demonstrate the involvement of glutamate receptor in working memory, recognition memory, stimulus–response learning and memory, and higher cognitive functions. We also discuss the unique functions of NMDA receptors and the fundamental role of AMPA receptors in processes that are common to some of these forms of memory, including encoding, consolidation and retrieval. PMID:16490260

"When Words Don't Come Easily": Personal Narratives from Adolescents Experiencing Shyness as an Emotional and Behavioural Problem in the School Context

ERIC Educational Resources Information Center

Lund, Ingrid

2016-01-01

The purpose of this article is to present narratives from 15 adolescents experiencing shy behaviour as an emotional and behavioural problem in the school context in light of narrative understanding. The investigation is intended to generate knowledge about this largely under-researched phenomenon based on the personal accounts of those who are…

Central genomic regulation of the expression of oestrous behaviour in dairy cows: a review.

PubMed

Woelders, H; van der Lende, T; Kommadath, A; te Pas, M F W; Smits, M A; Kaal, L M T E

2014-05-01

The expression of oestrous behaviour in Holstein Friesian dairy cows has progressively decreased over the past 50 years. Reduced oestrus expression is one of the factors contributing to the current suboptimal reproductive efficiency in dairy farming. Variation between and within cows in the expression of oestrous behaviour is associated with variation in peripheral blood oestradiol concentrations during oestrus. In addition, there is evidence for a priming role of progesterone for the full display of oestrous behaviour. A higher rate of metabolic clearance of ovarian steroids could be one of the factors leading to lower peripheral blood concentrations of oestradiol and progesterone in high-producing dairy cows. Oestradiol acts on the brain by genomic, non-genomic and growth factor-dependent mechanisms. A firm base of understanding of the ovarian steroid-driven central genomic regulation of female sexual behaviour has been obtained from studies on rodents. These studies have resulted in the definition of five modules of oestradiol-activated genes in the brain, referred to as the GAPPS modules. In a recent series of studies, gene expression in the anterior pituitary and four brain areas (amygdala, hippocampus, dorsal hypothalamus and ventral hypothalamus) in oestrous and luteal phase cows, respectively, has been measured, and the relation with oestrous behaviour of these cows was analysed. These studies identified a number of genes of which the expression was associated with the intensity of oestrous behaviour. These genes could be grouped according to the GAPPS modules, suggesting close similarity of the regulation of oestrous behaviour in cows and female sexual behaviour in rodents. A better understanding of the central genomic regulation of the expression of oestrous behaviour in dairy cows may in due time contribute to improved (genomic) selection strategies for appropriate oestrus expression in high-producing dairy cows.

'And you'll suddenly realise 'I've not washed my hands': medical students', junior doctors' and medical educators' narratives of hygiene behaviours.

PubMed

Cresswell, Penelope; Monrouxe, Lynn V

2018-03-22

Compliance to hygiene behaviours has long been recognised as important in the prevention and control of healthcare associated infections, but medical doctors still display some of the lowest rates of compliance of all healthcare workers. We aim to understand compliance to hygiene behaviours by analysing medical students', junior doctors' and medical educators' narratives of these behaviours to identify their respective attitudes and beliefs around compliance and how these are learnt during training. Such an understanding can inform future interventions to improve compliance targeted to areas of greatest need. A qualitative study, using narrative interviews (nine focus groups and one individual interview). Data were analysed thematically using inductive framework analysis. Teaching hospitals in the UK. Convenience sample of 25 participants: third-year medical students in their first clinical year (n=13), junior doctors (n=6) and medical educators (n=6). We identified four main themes: (1) knowledge, (2) constraints, (3) role models/culture and (4) hygiene as an added extra. Knowledge varied across participant groups and appeared to influence behaviours; medical students relied on what they have been told by seniors, while medical educators relied on their own knowledge and experience. There was a strong belief that evidence for the effectiveness of good hygiene behaviours is lacking. Furthermore, medical educators' behaviour appears to strongly influence others. Finally, hygiene was predominately viewed as an added extra rather than an integral part of the process. Awareness of the evidence around good hygiene needs to be improved at all levels. Medical students and junior doctors should be encouraged to consider why they are asked to perform certain hygiene behaviours in order to improve ownership of those behaviours. Medical educators need to recognise their responsibilities as role models for their junior counterparts, thereby understanding their role in developing the culture of hygiene practices within their clinical domains. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Cocaine affects foraging behaviour and biogenic amine modulated behavioural reflexes in honey bees.

PubMed

Søvik, Eirik; Even, Naïla; Radford, Catherine W; Barron, Andrew B

2014-01-01

In humans and other mammals, drugs of abuse alter the function of biogenic amine pathways in the brain leading to the subjective experience of reward and euphoria. Biogenic amine pathways are involved in reward processing across diverse animal phyla, however whether cocaine acts on these neurochemical pathways to cause similar rewarding behavioural effects in animal phyla other than mammals is unclear. Previously, it has been shown that bees are more likely to dance (a signal of perceived reward) when returning from a sucrose feeder after cocaine treatment. Here we examined more broadly whether cocaine altered reward-related behaviour, and biogenic amine modulated behavioural responses in bees. Bees developed a preference for locations at which they received cocaine, and when foraging at low quality sucrose feeders increase their foraging rate in response to cocaine treatment. Cocaine also increased reflexive proboscis extension to sucrose, and sting extension to electric shock. Both of these simple reflexes are modulated by biogenic amines. This shows that systemic cocaine treatment alters behavioural responses that are modulated by biogenic amines in insects. Since insect reward responses involve both octopamine and dopamine signalling, we conclude that cocaine treatment altered diverse reward-related aspects of behaviour in bees. We discuss the implications of these results for understanding the ecology of cocaine as a plant defence compound. Our findings further validate the honey bee as a model system for understanding the behavioural impacts of cocaine, and potentially other drugs of abuse.

Mutual Inductance Problem for a System Consisting of a Current Sheet and a Thin Metal Plate

NASA Technical Reports Server (NTRS)

Fulton, J. P.; Wincheski, B.; Nath, S.; Namkung, M.

1993-01-01

Rapid inspection of aircraft structures for flaws is of vital importance to the commercial and defense aircraft industry. In particular, inspecting thin aluminum structures for flaws is the focus of a large scale R&D effort in the nondestructive evaluation (NDE) community. Traditional eddy current methods used today are effective, but require long inspection times. New electromagnetic techniques which monitor the normal component of the magnetic field above a sample due to a sheet of current as the excitation, seem to be promising. This paper is an attempt to understand and analyze the magnetic field distribution due to a current sheet above an aluminum test sample. A simple theoretical model, coupled with a two dimensional finite element model (FEM) and experimental data will be presented in the next few sections. A current sheet above a conducting sample generates eddy currents in the material, while a sensor above the current sheet or in between the two plates monitors the normal component of the magnetic field. A rivet or a surface flaw near a rivet in an aircraft aluminum skin will disturb the magnetic field, which is imaged by the sensor. Initial results showed a strong dependence of the flaw induced normal magnetic field strength on the thickness and conductivity of the current-sheet that could not be accounted for by skin depth attenuation alone. It was believed that the eddy current imaging method explained the dependence of the thickness and conductivity of the flaw induced normal magnetic field. Further investigation, suggested the complexity associated with the mutual inductance of the system needed to be studied. The next section gives an analytical model to better understand the phenomenon.

Is the Aluminum Hypothesis Dead?

PubMed Central

2014-01-01

The Aluminum Hypothesis, the idea that aluminum exposure is involved in the etiology of Alzheimer disease, dates back to a 1965 demonstration that aluminum causes neurofibrillary tangles in the brains of rabbits. Initially the focus of intensive research, the Aluminum Hypothesis has gradually been abandoned by most researchers. Yet, despite this current indifference, the Aluminum Hypothesis continues to attract the attention of a small group of scientists and aluminum continues to be viewed with concern by some of the public. This review article discusses reasons that mainstream science has largely abandoned the Aluminum Hypothesis and explores a possible reason for some in the general public continuing to view aluminum with mistrust. PMID:24806729

Experimental Procedure for Warm Spinning of Cast Aluminum Components.

PubMed

Roy, Matthew J; Maijer, Daan M

2017-02-01

High performance, cast aluminum automotive wheels are increasingly being incrementally formed via flow forming/metal spinning at elevated temperatures to improve material properties. With a wide array of processing parameters which can affect both the shape attained and resulting material properties, this type of processing is notoriously difficult to commission. A simplified, light-duty version of the process has been designed and implemented for full-size automotive wheels. The apparatus is intended to assist in understanding the deformation mechanisms and the material response to this type of processing. An experimental protocol has been developed to prepare for, and subsequently perform forming trials and is described for as-cast A356 wheel blanks. The thermal profile attained, along with instrumentation details are provided. Similitude with full-scale forming operations which impart significantly more deformation at faster rates is discussed.

Experimental Procedure for Warm Spinning of Cast Aluminum Components

PubMed Central

Roy, Matthew J.; Maijer, Daan M.

2017-01-01

High performance, cast aluminum automotive wheels are increasingly being incrementally formed via flow forming/metal spinning at elevated temperatures to improve material properties. With a wide array of processing parameters which can affect both the shape attained and resulting material properties, this type of processing is notoriously difficult to commission. A simplified, light-duty version of the process has been designed and implemented for full-size automotive wheels. The apparatus is intended to assist in understanding the deformation mechanisms and the material response to this type of processing. An experimental protocol has been developed to prepare for, and subsequently perform forming trials and is described for as-cast A356 wheel blanks. The thermal profile attained, along with instrumentation details are provided. Similitude with full-scale forming operations which impart significantly more deformation at faster rates is discussed. PMID:28190063

Characterization of Cracking Mechanisms of Carbon Anodes Used in Aluminum Industry by Optical Microscopy and Tomography

NASA Astrophysics Data System (ADS)

Amrani, Salah; Kocaefe, Duygu; Kocaefe, Yasar; Bhattacharyay, Dipankar; Bouazara, Mohamed; Morais, Brigitte

2016-10-01

The objective of this work is to understand the different mechanisms of crack formation in dense anodes used in the aluminum industry. The first approach used is based on the qualitative characterization of the surface cracks and the depth of these cracks. The second approach, which constitutes a quantitative characterization, is carried out by determining the distribution of the crack width along its length as well as the percentage of the surface containing cracks. A qualitative analysis of crack formation was also carried out using 3D tomography. It was observed that mixing and forming conditions have a significant effect on crack formation in green anodes. The devolatilization of pitch during baking causes the formation and propagation of cracks in baked anodes in which large particles control the direction of crack propagation.

Low temperature deformation behavior of an electromagnetically bulged 5052 aluminum alloy

PubMed Central

Li, Zu; Li, Ning; Wang, Duzhen; Ouyang, Di; Liu, Lin

2016-01-01

The fundamental understanding of the deformation behavior of electromagnetically formed metallic components under extreme conditions is important. Here, the effect of low temperature on the deformation behavior of an electromagnetically-bulged 5052 aluminum alloy was investigated through uniaxial tension. We found that the Portevin-Le Chatelier Effect, designated by the serrated characteristic in stress-strain curves, continuously decays until completely disappears with decreasing temperature. The physical origin of the phenomenon is rationalized on the basis of the theoretical analysis and the Monte Carlo simulation, which reveal an increasing resistance to dislocation motion imposed by lowering temperature. The dislocations are captured completely by solute atoms at −50 °C, which results in the extinction of Portevin-Le Chatelier. The detailed mechanism responsible for this process is further examined through Monte Carlo simulation. PMID:27426919

[Roles of organic acid metabolism in plant adaptation to nutrient deficiency and aluminum toxicity stress].

PubMed

Wang, Jianfei; Shen, Qirong

2006-11-01

Organic acids not only act as the intermediates in carbon metabolism, but also exert key roles in the plant adaptation to nutrient deficiency and metal stress and in the plant-microbe interactions at root-soil interface. From the viewpoint of plant nutrition, this paper reviewed the research progress on the formation and physiology of organic acids in plant, and their functions in nitrogen metabolism, phosphorus and iron uptake, aluminum tolerance, and soil ecology. New findings in the membrane transport of organic acids and the biotechnological manipulation of organic acids in transgenic model were also discussed. This novel perspectives of organic acid metabolism and its potential manipulation might present a possibility to understand the fundamental aspects of plant physiology, and lead to the new strategies to obtain crop varieties better adapted to environmental and metal stress.

Isotopic evidence for determining the sources of dissolved organic sulfur in a forested catchment

Treesearch

Phil-Goo Kang; Myron J. Mitchell; Bernhard Mayer; John L. Campbell

2014-01-01

Understanding sulfur (S) biogeochemistry, especially in those watersheds subject to elevated levels of atmospheric S inputs, is needed for determining the factors that contribute to acidification, nutrient losses and the mobilization of toxic solutes (e.g., monomeric aluminum and methylmercury). S is found in a variety of both organic and inorganic forms undergoing a...

M and D SIG progress report: Laboratory simulations of LDEF impact features

NASA Technical Reports Server (NTRS)

Horz, Friedrich; Bernhard, R. P.; See, Thomas H.; Atkinson, Dale R.; Allbrooks, Martha K.

1991-01-01

Reported here are impact simulations into pure Teflon and aluminum targets. These experiments will allow first order interpretations of impact features on the Long Duration Exposure Facility (LDEF), and they will serve as guides for dedicated experiments that employ the real LDEF blankets, both unexposed and exposed, for a refined understanding of the Long Duration Exposure Facility's collisional environment.

How Thin Is Foil? Applying Density to Find the Thickness of Aluminum Foil

ERIC Educational Resources Information Center

Concannon, James P.

2011-01-01

In this activity, I show how high school students apply their knowledge of density to solve an unknown variable, such as thickness. Students leave this activity with a better understanding of density, the knowledge that density is a characteristic property of a given substance, and the ways density can be measured. (Contains 4 figures and 1 table.)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pletincx, Sven; Marcoen, Kristof; Trotochaud, Lena

Understanding the stability of chemical interactions at the polymer/metal oxide interface under humid conditions is vital to understand the long-term durability of hybrid systems. Therefore, the interface of ultrathin PMMA films on native aluminum oxide, deposited by reactive adsorption, was studied. The characterization of the interface of the coated substrates was performed using ambient pressure X-ray photoelectron spectroscopy (APXPS), Fourier transform infrared spectroscopy in the Kretschmann geometry (ATR-FTIR Kretschmann) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The formation of hydrogen bonds and carboxylate ionic bonds at the interface are observed. The formed ionic bond is stable up to 5 Torrmore » water vapour pressure as shown by APXPS. However, when the coated samples are exposed to an excess of aqueous electrolyte, an increase in the amount of carboxylate bonds at the interface, as a result of hydrolysis of the methoxy group, is observed by ATR-FTIR Kretschmann. In conclusion, these observations, supported by ToF-SIMS spectra, lead to the proposal of an adsorption mechanism of PMMA on aluminum oxide, which shows the formation of methanol at the interface and the effect of water molecules on the different interfacial interactions.« less

Restoring normal eating behaviour in adolescents with anorexia nervosa: A video analysis of nursing interventions.

PubMed

Beukers, Laura; Berends, Tamara; de Man-van Ginkel, Janneke M; van Elburg, Annemarie A; van Meijel, Berno

2015-12-01

An important part of inpatient treatment for adolescents with anorexia nervosa is to restore normal eating behaviour. Health-care professionals play a significant role in this process, but little is known about their interventions during patients' meals. The purpose of the present study was to describe nursing interventions aimed at restoring normal eating behaviour in patients with anorexia nervosa. The main research question was: 'Which interventions aimed at restoring normal eating behaviour do health-care professionals in a specialist eating disorder centre use during meal times for adolescents diagnosed with anorexia nervosa? The present study was a qualitative, descriptive study that used video recordings made during mealtimes. Thematic data analysis was applied. Four categories of interventions emerged from the data: (i) monitoring and instructing; (ii) encouraging and motivating; (iii) supporting and understanding; and (iv) educating. The data revealed a directive attitude aimed at promoting behavioural change, but always in combination with empathy and understanding. In the first stage of clinical treatment, health-care professionals focus primarily on changing patients' eating behaviour. However, they also address the psychosocial needs that become visible in patients as they struggle to restore normal eating behaviour. The findings of the present study can be used to assist health-care professionals, and improve multidisciplinary guidelines and health-care professionals' training programmes. © 2015 Australian College of Mental Health Nurses Inc.

Inappropriate sexual behaviour in adolescents with autism spectrum disorder: what education is recommended and why.

PubMed

Beddows, Nicola; Brooks, Rachel

2016-08-01

Autism spectrum disorder (ASD) is a neurodevelopmental disorder impairing social skills and communication. Adolescents with ASD have sexual needs, but may not understand their physical and emotional development resulting in inappropriate sexual behaviour. The aim of this review is to describe the type of inappropriate behaviour that presents in these adolescents, explain why such behaviours occur, suggest what education is suitable and identify current gaps in research. The databases EMBASE, OVID MEDLINE and PSYCINFO were searched for relevant articles. In total, 5241 articles were found, with an additional 15 sources found via soft searches, of which 42 met inclusion criteria and were subsequently reviewed. Sexual behaviours that occur in these adolescents with ASD include hypermasturbation, public masturbation, inappropriate romantic gestures, inappropriate arousal and exhibitionism. Such behaviours are thought to be caused via a lack of understanding of normal puberty, the absence of appropriate sex education, the severity of their ASD and other associated problems. It is suggested that individualized, repetitive education should be started from an early age in an accessible form. Social skills development is also important before more technical aspects of sex education are taught. Despite being such a common problem for schools, institutions and families to manage, it is surprising how sparse literature is particularly regarding why inappropriate behaviour occurs and what education is effective. © 2015 Wiley Publishing Asia Pty Ltd.

Model development for household waste prevention behaviour.

PubMed

Bortoleto, Ana Paula; Kurisu, Kiyo H; Hanaki, Keisuke

2012-12-01

Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude-behaviour theories with elements from wider models from environmental psychology, an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz's altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste management behaviour requiring particular approaches to increase individuals' engagement in future policies. Copyright © 2012 Elsevier Ltd. All rights reserved.

General practitioners trained in motivational interviewing can positively affect the attitude to behaviour change in people with type 2 diabetes. One year follow-up of an RCT, ADDITION Denmark.

PubMed

Rubak, Sune; Sandbaek, Annelli; Lauritzen, Torsten; Borch-Johnsen, Knut; Christensen, Bo

2009-01-01

To examine whether training GPs in motivational interviewing (MI) can improve type 2 diabetic patients' (1) understanding of diabetes, (2) beliefs regarding prevention and treatment, and (3) motivation for behaviour change. A randomized controlled trial including 65 GPs and 265 type 2 diabetic patients. The GPs were randomized in two groups, one with and one without MI training. Both groups received training in target-driven intensive treatment of type 2 diabetic patients. The intervention was a 1(1/2)-day residential course in MI with (1/2)-day follow-up twice during the first year. The patient data stemmed from previously validated questionnaires. The Health Care Climates Questionnaire assesses the patient-doctor relationship and type of counselling. The Treatment Self-Regulation Questionnaire assesses the degree to which behaviour tends to be self-determined. The Diabetes Illness Representation Questionnaire assesses beliefs and understanding of type 2 diabetes. The Summary of Diabetes Self Care Activities assesses the extent of various self-care activities related to type 2 diabetes. The response rate to our questionnaires was 87%. Patients in the intervention group were significantly more autonomous and motivated in their inclination to change behaviour after one year compared with the patients from the control group. Patients in the intervention group were also significantly more conscious of the importance of controlling their diabetes, and had a significantly better understanding of the possibility of preventing complications. MI improved type 2 patients' understanding of diabetes, their beliefs regarding treatment aspects, their contemplation on and motivation for behaviour change. Whether our results can be sustained long term and are clinically relevant in terms of changes in risk profile advocates further research.

Method And Reactor For Production Of Aluminum By Carbothermic Reduction Of Alumina

DOEpatents

Aune, Jan Arthur; Johansen, Kai

2004-10-19

A hollow partition wall is employed to feed carbon material to an underflow of a carbothermic reduction furnace used to make aluminum. The partition wall divides a low temperature reaction zone where aluminum oxide is reacted with carbon to form aluminum carbide and a high temperature reaction zone where the aluminum carbide and remaining aluminum oxide are reacted to form aluminum and carbon monoxide.

Understanding risk behaviours: how the sociology of deviance may contribute? The case of drug-taking.

PubMed

Peretti-Watel, Patrick; Moatti, Jean-Paul

2006-08-01

This paper argues that the sociology of deviance can be used to improve our understanding of some difficulties and unintended effects of health-promotion interventions designed to change risk behaviours, especially drug-taking. Firstly, many people engaged in 'risk behaviours' tend to deny the 'risky' label just as delinquents neutralise the 'deviant' label, and preventive information itself may be used by individuals in shaping risk denial. Secondly, deliberate risk-taking may be an 'innovative deviance',which is related to difficulties of conforming to the dominant 'risk culture'. Health promotion is likely to be quite ineffective if it remains wedded to the dominant risk culture and de facto contributes to the spread of it.

Suicidal behaviour in adolescents and young adults with ASD: findings from a systematic review.

PubMed

Hannon, Geraldine; Taylor, Emily P

2013-12-01

Suicide is a major problem in Western society. However we have very little understanding of suicidal behaviour among individuals with autism spectrum disorders. The purpose of this review is to synthesise primary research on suicidal behaviour among adolescents and young adults with autism spectrum disorders in order to estimate prevalence and to identify and critically evaluate risk factors for suicidal behaviour in this population. Four primary research studies were identified for this review following a comprehensive literature search. The available research provides little empirical evidence for the processes underlying suicidal behaviour in adolescents and young adults with autism. © 2013.

Behavioural surveillance: the value of national coordination

PubMed Central

McGarrigle, C; Fenton, K; Gill, O; Hughes, G; Morgan, D; Evans, B

2002-01-01

Behavioural surveillance programmes have enabled the description of population patterns of risk behaviours for STI and HIV transmission and aid in the understanding of how epidemics of STI are generated. They have been instrumental in helping to refine public health interventions and inform the targeting of sexual health promotion and disease control strategies. The formalisation and coordination of behavioural surveillance in England and Wales could optimise our ability to measure the impact of interventions and health promotion strategies on behaviour. This will be particularly useful for monitoring the progress towards specific disease control targets set in the Department of Health's new Sexual Health and HIV Strategy. PMID:12473798

Method of forming aluminum oxynitride material and bodies formed by such methods

DOEpatents

Bakas, Michael P [Ammon, ID; Lillo, Thomas M [Idaho Falls, ID; Chu, Henry S [Idaho Falls, ID

2010-11-16

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

High temperature coatings for gas turbines

DOEpatents

Zheng, Xiaoci Maggie

2003-10-21

Coating for high temperature gas turbine components that include a MCrAlX phase, and an aluminum-rich phase, significantly increase oxidation and cracking resistance of the components, thereby increasing their useful life and reducing operating costs. The aluminum-rich phase includes aluminum at a higher concentration than aluminum concentration in the MCrAlX alloy, and an aluminum diffusion-retarding composition, which may include cobalt, nickel, yttrium, zirconium, niobium, molybdenum, rhodium, cadmium, indium, cerium, iron, chromium, tantalum, silicon, boron, carbon, titanium, tungsten, rhenium, platinum, and combinations thereof, and particularly nickel and/or rhenium. The aluminum-rich phase may be derived from a particulate aluminum composite that has a core comprising aluminum and a shell comprising the aluminum diffusion-retarding composition.

Al/sub 2/S/sub 3/ preparation and use in electrolysis process for aluminum production

DOEpatents

Hsu, C.C.; Loutfy, R.O.; Yao, N.P.

A continuous process for producing aluminum sulfide and for electrolyzing the aluminum sulfide to form metallic aluminum in which the aluminum sulfide is produced from aluminum oxide and COS or CS/sub 2/ in the presence of a chloride melt which also serves as the electrolysis bath. Circulation between the reactor and electrolysis cell is carried out to maintain the desired concentration of aluminum sulfide in the bath.

Fracture mechanics and surface chemistry studies of fatigue crack growth in an aluminum alloy

NASA Astrophysics Data System (ADS)

Wei, R. P.; Pao, P. S.; Hart, R. G.; Weir, T. W.; Simmons, G. W.

1980-12-01

Fracture mechanics and surface chemistry studies were carried out to develop further understanding of the influence of water vapor on fatigue crack growth in aluminum alloys. The room temperature fatigue crack growth response was determined for 2219-T851 aluminum alloy exposed to water vapor at pressures from 1 to 30 Pa over a range of stress intensity factors ( K). Data were also obtained in vacuum (at < 0.50 μPa), and dehumidified argon. The test results showed that, at a frequency of 5 Hz, the rate of crack growth is essentially unaffected by water vapor until a threshold pressure is reached. Above this threshold, the rates increased, reaching a maximum within one order of magnitude increase in vapor pressure. This maximum crack growth rate is equal to that obtained in air (40 to 60 pct relative humidity), distilled water and 3.5 pct NaCl solution on the same material. Parallel studies of the reactions of water vapor with fresh alloy surfaces (produced either by in situ impact fracture or by ion etching) were made by Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS). The extent of surface reaction was monitored by changes in the oxygen AES and XPS signals. Correlation between the fatigue crack growth response and the surface reaction kinetics has been made, and is consistent with a transport-limited model for crack growth. The results also suggest that enhancement of fatigue crack growth by water vapor in the aluminum alloys occurs through a “hydrogen embrittle ment” mechanism.

Capillary electrophoresis for aluminum ion speciation: Optimized separation conditions for complex polycation mixtures.

PubMed

Ouadah, Nesrine; Moire, Claudine; Brothier, Fabien; Kuntz, Jean-François; Deschaume, Olivier; Bartic, Carmen; Cottet, Hervé

2018-06-01

Aluminum chlorohydrates (ACH) are used in numerous applications and commercial products on a global scale including water treatment, catalysis or antiperspirants. They are complex mixtures of water soluble aluminum polycations of different degrees of polymerization, that are difficult to separate and quantify due to their susceptibility to depolymerize in solution when placed out of equilibrium, which is inherent to any separation process. We recently achieved the first capillary electrophoresis separation and characterization of ACH oligomers using 4-morpholineethanesulfonic acid (MES) as background electrolyte counter-ion. MES stabilizes the separated ACH oligomers during the electrophoretic process leading to highly repeatable and fast separations. In this work, the separation of ACH oligomers was further studied and perfected by varying the ionic strength, MES concentration and pH of the background electrolyte. Complex electrophoretic behavior is reported for the separation of Al 13 , Al 30 and Na + ions according to these experimental parameters. The transformation of the electropherograms in effective mobility scale and the use of the slope-plot approach are used to better understand the observed changes in selectivity/resolution. Optimal conditions (700 mM MES at 25 mM ionic strength containing 0.1 mM didodecyldimethylammonium bromide for dynamic capillary coating, pH 4.8) obtained for the separation of ACH oligomers are used for the baseline separation of samples difficult to analyze with other methods, including different molecular, aggregated and colloidal forms of aluminum from the Al 13 , Al 30 and Na + mixture, validating the rationale of the approach. Copyright © 2018. Published by Elsevier B.V.

Using theories of behaviour to understand transfusion prescribing in three clinical contexts in two countries: development work for an implementation trial.

PubMed

Francis, Jill J; Tinmouth, Alan; Stanworth, Simon J; Grimshaw, Jeremy M; Johnston, Marie; Hyde, Chris; Stockton, Charlotte; Brehaut, Jamie C; Fergusson, Dean; Eccles, Martin P

2009-10-24

Blood transfusion is an essential part of healthcare and can improve patient outcomes. However, like most therapies, it is also associated with significant clinical risks. In addition, there is some evidence of overuse. Understanding the potential barriers and enablers to reduced prescribing of blood products will facilitate the selection of intervention components likely to be effective, thereby reducing the number of costly trials evaluating different implementation strategies. Using a theoretical basis to understand behaviours targeted for change will contribute to a 'basic science' relating to determinants of professional behaviour and how these inform the selection of techniques for changing behaviour. However, it is not clear which theories of behaviour are relevant to clinicians' transfusing behaviour. The aim of this study is to use a theoretical domains framework to identify relevant theories, and to use these theories to identify factors that predict the decision to transfuse. The study involves two steps: interview study and questionnaire study. Using a previously identified framework, we will conduct semi-structured interviews with clinicians to elicit their views about which factors are associated with waiting and further monitoring the patient rather than transfusing red blood cells. Interviews will cover the following theoretical domains: knowledge; skills; social/professional role and identity; beliefs about capabilities; beliefs about consequences; motivation and goals; memory, attention, and decision processes; environmental context and resources; social influences; emotion; behavioural regulation; nature of the behaviour. The interviews will take place independently in Canada and the UK and involve two groups of physicians in each country (UK: adult and neonatal intensive care physicians; Canada: intensive care physicians and orthopaedic surgeons). We will: analyse interview transcript content to select relevant theoretical domains; use consensus processes to map these domains on to theories of behaviour; develop questionnaires based on these theories; and mail them to each group of physicians in the two countries. From our previous work, it is likely that the theories will include: theory of planned behaviour, social cognitive theory and the evidence-based strategy, implementation intention. The questionnaire data will measure predictor variables (theoretical constructs) and outcome variables (intention and clinical decision), and will be analysed using multiple regression analysis. We aim to achieve 150 respondents in each of the four groups for each postal survey.

40 CFR 63.5753 - How do I calculate the combined organic HAP content of aluminum wipedown solvents and aluminum...

Code of Federal Regulations, 2010 CFR

2010-07-01

... HAP content of aluminum wipedown solvents and aluminum recreational boat surface coatings? 63.5753... Standards for Hazardous Air Pollutants for Boat Manufacturing Standards for Aluminum Recreational Boat... wipedown solvents and aluminum recreational boat surface coatings? (a) Use equation 1 of this section to...

40 CFR 63.5753 - How do I calculate the combined organic HAP content of aluminum wipedown solvents and aluminum...

Code of Federal Regulations, 2011 CFR

2011-07-01

... HAP content of aluminum wipedown solvents and aluminum recreational boat surface coatings? 63.5753... Standards for Hazardous Air Pollutants for Boat Manufacturing Standards for Aluminum Recreational Boat... wipedown solvents and aluminum recreational boat surface coatings? (a) Use equation 1 of this section to...

Process of electrolysis and fractional crystallization for aluminum purification

DOEpatents

Dawless, R.K.; Bowman, K.A.; Mazgaj, R.M.; Cochran, C.N.

1983-10-25

A method is described for purifying aluminum that contains impurities, the method including the step of introducing such aluminum containing impurities to a charging and melting chamber located in an electrolytic cell of the type having a porous diaphragm permeable by the electrolyte of the cell and impermeable to molten aluminum. The method includes further the steps of supplying impure aluminum from the chamber to the anode area of the cell and electrolytically transferring aluminum from the anode area to the cathode through the diaphragm while leaving impurities in the anode area, thereby purifying the aluminum introduced into the chamber. The method includes the further steps of collecting the purified aluminum at the cathode, and lowering the level of impurities concentrated in the anode area by subjecting molten aluminum and impurities in said chamber to a fractional crystallization treatment wherein eutectic-type impurities crystallize and precipitate out of the aluminum. The eutectic impurities that have crystallized are physically removed from the chamber. The aluminum in the chamber is now suited for further purification as provided in the above step of electrolytically transferring aluminum through the diaphragm. 2 figs.

Process of electrolysis and fractional crystallization for aluminum purification

DOEpatents

Dawless, Robert K.; Bowman, Kenneth A.; Mazgaj, Robert M.; Cochran, C. Norman

1983-10-25

A method for purifying aluminum that contains impurities, the method including the step of introducing such aluminum containing impurities to a charging and melting chamber located in an electrolytic cell of the type having a porous diaphragm permeable by the electrolyte of the cell and impermeable to molten aluminum. The method includes further the steps of supplying impure aluminum from the chamber to the anode area of the cell and electrolytically transferring aluminum from the anode area to the cathode through the diaphragm while leaving impurities in the anode area, thereby purifying the aluminum introduced into the chamber. The method includes the further steps of collecting the purified aluminum at the cathode, and lowering the level of impurities concentrated in the anode area by subjecting molten aluminum and impurities in said chamber to a fractional crystallization treatment wherein eutectic-type impurities crystallize and precipitate out of the aluminum. The eutectic impurities that have crystallized are physically removed from the chamber. The aluminum in the chamber is now suited for further purification as provided in the above step of electrolytically transferring aluminum through the diaphragm.

The eating disorders: 2. Behavioural and dental management.

PubMed

Ashcroft, Angela; Milosevic, Alexander

2007-12-01

The eating disorders are a group of related but distinct disturbances in eating behaviour with wide-ranging effects. The first part in this series described the scientific background, clinical features and impact upon oro-dental health. This second part discusses behavioural and dental management. Dentists should have knowledge of the behavioural management of eating disorders (ED), especially if their ED patients are seeing other healthcare professionals. Dentists with this understanding may better engage with an ED patient in order to provide successful dental management within an overall holistic approach to patient care.

Anthropology and affect: a consideration of the idiosyncratic dimension of human behaviour.

PubMed

Izmirlian, H

1977-01-01

In this paper a theoretical perspective is presented in which affect occupies a central position and behaviour is viewed in terms of different degrees of affective expression. Such behaviour is conceptualized in terms of three models: a structural model, a rational model and a psychological model. While the first two models are frequently encountered in the literature, the psychological model has not received explicit formulation, although, as shown here, it is crucial in understanding certain forms of idiosyncratic behaviour that have political and social relevance.

Effects of aluminum-copper alloy filtration on photon spectra, air kerma rate and image contrast.

PubMed

Gonçalves, Andréa; Rollo, João Manuel Domingos de Almeida; Gonçalves, Marcelo; Haiter Neto, Francisco; Bóscolo, Frab Norberto

2004-01-01

This study evaluated the performance of aluminum-copper alloy filtration, without the original aluminum filter, for dental radiography in terms of x-ray energy spectrum, air kerma rate and image quality. Comparisons of various thicknesses of aluminum-copper alloy in three different percentages were made with aluminum filtration. Tests were conducted on an intra-oral dental x-ray machine and were made on mandible phantom and on step-wedge. Depending on the thickness of aluminum-copper alloy filtration, the beam could be hardened and filtrated. The use of the aluminum-copper alloy filter resulted in reductions in air kerma rate from 8.40% to 47.33%, and indicated the same image contrast when compared to aluminum filtration. Aluminum-copper alloy filtration may be considered a good alternative to aluminum filtration.

Casting Characteristics of High Cerium Content Aluminum Alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weiss, D; Rios, O R; Sims, Z C

This paper compares the castability of the near eutectic aluminum-cerium alloy system to the aluminum-silicon and aluminum-copper systems. The alloys are compared based on die filling capability, feeding characteristics and tendency to hot tear in both sand cast and permanent mold applications. The castability ranking of the binary Al–Ce systems is as good as the aluminum-silicon system with some deterioration as additional alloying elements are added. In alloy systems that use cerium in combination with common aluminum alloying elements such as silicon, magnesium and/or copper, the casting characteristics are generally better than the aluminum-copper system. In general, production systems formore » melting, de-gassing and other processing of aluminum-silicon or aluminum-copper alloys can be used without modification for conventional casting of aluminum-cerium alloys.« less

Modelling the Factors that Affect Individuals' Utilisation of Online Learning Systems: An Empirical Study Combining the Task Technology Fit Model with the Theory of Planned Behaviour

ERIC Educational Resources Information Center

Yu, Tai-Kuei; Yu, Tai-Yi

2010-01-01

Understanding learners' behaviour, perceptions and influence in terms of learner performance is crucial to predict the use of electronic learning systems. By integrating the task-technology fit (TTF) model and the theory of planned behaviour (TPB), this paper investigates the online learning utilisation of Taiwanese students. This paper provides a…

Using the Behaviour Change Wheel in infection prevention and control practice

PubMed Central

Atkins, Lou

2015-01-01

The Centre for Behaviour Change at University College London (UCL) is a new venture that has grown out of the work that we have been doing in the Health Psychology Research Group at UCL and seeks to harness the different pockets of behaviour change work in different disciplines across UCL. A lot of our work in health focuses on the adoption of evidence-based guidelines in practice; not just designing and evaluating interventions, but also developing usable tools for people who are tasked with changing behaviours. These tools aim to enable those who do not necessarily have a background in behavioural science to understand the behaviours they are trying to change and design appropriate interventions. PMID:28989457

Behavior-based control of insect crop pests

USDA-ARS?s Scientific Manuscript database

Manipulation of insect behaviour can provide the foundation for effective strategies for control of insect crop pests. A detailed understanding of life cycles and the behavioural repertoires of insect pests is essential for development of this approach. A variety of strategies have been developed ...

Reproducibility of Aluminum Foam by Combining Sintering and Dissolution Process with Precursor Foaming Process

NASA Astrophysics Data System (ADS)

Hangai, Yoshihiko; Matsushita, Hayato; Koyama, Shinji; Suzuki, Ryosuke; Matsubara, Masaaki

2017-07-01

A preliminary study of the reproducibility of aluminum foam was performed. Aluminum foam was fabricated by a sintering and dissolution process. It was found that aluminum foam containing a blowing agent can be fabricated without the decomposition of the blowing agent, namely, the densified aluminum foam can be used as a foamable precursor for refoaming. By heat treatment of the densified aluminum foam containing the blowing agent, pores were reproduced in the aluminum.

Multimaterial lamination as a means of retarding penetration and spallation failures in plates

NASA Technical Reports Server (NTRS)

Dibattista, J. D.; Humes, D. H.

1972-01-01

Experimental data are presented which show that hypervelocity impact spallation and penetration failures of a single solid aluminum plate and of a solid aluminum plate spaced a distance behind a Whipple meteor bumper may be retarded by replacing the solid aluminum plate with a laminated plate. Four sets of experiments were conducted. The first set of experiments was conducted with projectile mass and velocity held constant and with polycarbonate cylinders impacted into single plates of different construction. The second set of experiments was done with single plates of various construction and aluminum spherical projectiles of similar mass but different velocities. These two experiments showed that a laminated plate of aluminum and polycarbonate or aluminum and methyl methacrylate could prevent spallation and penetration failures with a lower areal density than either an all-aluminum laminated plate or a solid aluminum plate. The aluminum laminated plate was in turn superior to the solid aluminum plate in resisting spallation and penetration failures. In addition, through an example of 6061-T6 aluminum and methyl methacrylate, it is shown that a laminated structure ballistically superior to its parent materials may be built. The last two sets of experiments were conducted using bumper-protected main walls of solid aluminum and of laminated aluminum and polycarbonate. Again, under hypervelocity impact conditions, the laminated main walls were superior to the solid aluminum main walls in retarding spallation and penetration failures.

Tuning Energetic Material Reactivity Using Surface Functionalization of Aluminum Fuels

DTIC Science & Technology

2012-10-30

analysis of three different thermites consisting of aluminum (Al) particles with and without surface functionalization combined with molybdenum...of thermites , aluminum synthesis, aluminum fluoropolymer combustion, acid coatings Keerti S. Kappagantula, Cory Farley, Michelle L. Pantoya, Jillian...Reactivity Using Surface Functionalization of Aluminum Fuels Report Title ABSTRACT Combustion analysis of three different thermites consisting of aluminum (Al

Method of winning aluminum metal from aluminous ore

DOEpatents

Loutfy, Raouf O.; Keller, Rudolf; Yao, Neng-Ping

1981-01-01

Aluminous ore such as bauxite containing alumina is blended with coke or other suitable form of carbon and reacted with sulfur gas at an elevated temperature. For handling, the ore and coke can be extruded into conveniently sized pellets. The reaction with sulfur gas produces molten aluminum sulfide which is separated from residual solid reactants and impurities. The aluminum sulfide is further increased in temperature to cause its decomposition or sublimation, yielding aluminum subsulfide liquid (AlS) and sulfur gas that is recycled. The aluminum monosulfide is then cooled to below its disproportionation temperature to again form molten aluminum sulfide and aluminum metal. A liquid-liquid or liquid-solid separation, depending on the separation temperature, provides product aluminum and aluminum sulfide for recycle to the disproportionation step.

Aluminum powder metallurgy processing

NASA Astrophysics Data System (ADS)

Flumerfelt, Joel Fredrick

In recent years, the aluminum powder industry has expanded into non-aerospace applications. However, the alumina and aluminum hydroxide in the surface oxide film on aluminum powder require high cost powder processing routes. A driving force for this research is to broaden the knowledge base about aluminum powder metallurgy to provide ideas for fabricating low cost aluminum powder components. The objective of this dissertation is to explore the hypothesis that there is a strong linkage between gas atomization processing conditions, as-atomized aluminum powder characteristics, and the consolidation methodology required to make components from aluminum powder. The hypothesis was tested with pure aluminum powders produced by commercial air atomization commercial inert gas atomization and gas atomization reaction synthesis (GARS). The commercial atomization methods are bench marks of current aluminum powder technology. The GARS process is a laboratory scale inert gas atomization facility. A benefit of using pure aluminum powders is an unambiguous interpretation of the results without considering the effects of alloy elements. A comparison of the GARS aluminum powders with the commercial aluminum powders showed the former to exhibit superior powder characteristics. The powders were compared in terms of size and shape, bulk chemistry, surface oxide chemistry and structure, and oxide film thickness. Minimum explosive concentration measurements assessed the dependence of explosibility hazard on surface area, oxide film thickness, and gas atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization oxidation of aluminum powder. An Al-Ti-Y GARS alloy exposed in ambient air at different temperatures revealed the effect of reactive alloy elements on post-atomization powder oxidation. The pure aluminum powders were consolidated by two different routes, a conventional consolidation process for fabricating aerospace components with aluminum powder and a proposed alternative. The consolidation procedures were compared by evaluating the consolidated microstructures and the corresponding mechanical properties. A low temperature solid state sintering experiment demonstrated that tap densified GARS aluminum powders can form sintering necks between contacting powder particles, unlike the total resistance to sintering of commercial air atomization aluminum powder.

Advances in aluminum hydroxide-based adjuvant research and its mechanism.

PubMed

He, Peng; Zou, Yening; Hu, Zhongyu

2015-01-01

In the past few decades, hundreds of materials have been tried as adjuvant; however, only aluminum-based adjuvants continue to be used widely in the world. Aluminum hydroxide, aluminum phosphate and alum constitute the main forms of aluminum used as adjuvants. Among these, aluminum hydroxide is the most commonly used chemical as adjuvant. In spite of its wide spread use, surprisingly, the mechanism of how aluminum hydroxide-based adjuvants exert their beneficial effects is still not fully understood. Current explanations for the mode of action of aluminum hydroxide-based adjuvants include, among others, the repository effect, pro-phagocytic effect, and activation of the pro-inflammatory NLRP3 pathway. These collectively galvanize innate as well as acquired immune responses and activate the complement system. Factors that have a profound influence on responses evoked by aluminum hydroxide-based adjuvant applications include adsorption rate, strength of the adsorption, size and uniformity of aluminum hydroxide particles, dosage of adjuvant, and the nature of antigens. Although vaccines containing aluminum hydroxide-based adjuvants are beneficial, sometimes they cause adverse reactions. Further, these vaccines cannot be stored frozen. Until recently, aluminum hydroxide-based adjuvants were known to preferentially prime Th2-type immune responses. However, results of more recent studies show that depending on the vaccination route, aluminum hydroxide-based adjuvants can enhance both Th1 as well as Th2 cellular responses. Advances in systems biology have opened up new avenues for studying mechanisms of aluminum hydroxide-based adjuvants. These will assist in scaling new frontiers in aluminum hydroxide-based adjuvant research that include improvement of formulations, use of nanoparticles of aluminum hydroxide and development of composite adjuvants.

Advances in aluminum hydroxide-based adjuvant research and its mechanism

PubMed Central

He, Peng; Zou, Yening; Hu, Zhongyu

2015-01-01

In the past few decades, hundreds of materials have been tried as adjuvant; however, only aluminum-based adjuvants continue to be used widely in the world. Aluminum hydroxide, aluminum phosphate and alum constitute the main forms of aluminum used as adjuvants. Among these, aluminum hydroxide is the most commonly used chemical as adjuvant. In spite of its wide spread use, surprisingly, the mechanism of how aluminum hydroxide-based adjuvants exert their beneficial effects is still not fully understood. Current explanations for the mode of action of aluminum hydroxide-based adjuvants include, among others, the repository effect, pro-phagocytic effect, and activation of the pro-inflammatory NLRP3 pathway. These collectively galvanize innate as well as acquired immune responses and activate the complement system. Factors that have a profound influence on responses evoked by aluminum hydroxide-based adjuvant applications include adsorption rate, strength of the adsorption, size and uniformity of aluminum hydroxide particles, dosage of adjuvant, and the nature of antigens. Although vaccines containing aluminum hydroxide-based adjuvants are beneficial, sometimes they cause adverse reactions. Further, these vaccines cannot be stored frozen. Until recently, aluminum hydroxide-based adjuvants were known to preferentially prime Th2-type immune responses. However, results of more recent studies show that depending on the vaccination route, aluminum hydroxide-based adjuvants can enhance both Th1 as well as Th2 cellular responses. Advances in systems biology have opened up new avenues for studying mechanisms of aluminum hydroxide-based adjuvants. These will assist in scaling new frontiers in aluminum hydroxide-based adjuvant research that include improvement of formulations, use of nanoparticles of aluminum hydroxide and development of composite adjuvants. PMID:25692535

Minimizing residual aluminum concentration in treated water by tailoring properties of polyaluminum coagulants.

PubMed

Kimura, Masaoki; Matsui, Yoshihiko; Kondo, Kenta; Ishikawa, Tairyo B; Matsushita, Taku; Shirasaki, Nobutaka

2013-04-15

Aluminum coagulants are widely used in water treatment plants to remove turbidity and dissolved substances. However, because high aluminum concentrations in treated water are associated with increased turbidity and because aluminum exerts undeniable human health effects, its concentration should be controlled in water treatment plants, especially in plants that use aluminum coagulants. In this study, the effect of polyaluminum chloride (PACl) coagulant characteristics on dissolved residual aluminum concentrations after coagulation and filtration was investigated. The dissolved residual aluminum concentrations at a given coagulation pH differed among the PACls tested. Very-high-basicity PACl yielded low dissolved residual aluminum concentrations and higher natural organic matter (NOM) removal. The low residual aluminum concentrations were related to the low content of monomeric aluminum (Ala) in the PACl. Polymeric (Alb)/colloidal (Alc) ratio in PACl did not greatly influence residual aluminum concentration. The presence of sulfate in PACl contributed to lower residual aluminum concentration only when coagulation was performed at around pH 6.5 or lower. At a wide pH range (6.5-8.5), residual aluminum concentrations <0.02 mg/L were attained by tailoring PACl properties (Ala percentage ≤0.5%, basicity ≥85%). The dissolved residual aluminum concentrations did not increase with increasing the dosage of high-basicity PACl, but did increase with increasing the dosage of normal-basicity PACl. We inferred that increasing the basicity of PACl afforded lower dissolved residual aluminum concentrations partly because the high-basicity PACls could have a small percentage of Ala, which tends to form soluble aluminum-NOM complexes with molecular weights of 100 kDa-0.45 μm. Copyright © 2013 Elsevier Ltd. All rights reserved.

Serum aluminum levels in dialysis patients after sclerotherapy of internal hemorrhoids with aluminum potassium sulfate and tannic acid.

PubMed

Tsunoda, Akira; Nakagi, Masafumi; Kano, Nobuyasu; Mizutani, Masahiko; Yamaguchi, Kenji

2014-12-01

Aluminum potassium sulfate and tannic acid (ALTA) is an effective sclerosing agent for internal hemorrhoids. However, it is contraindicated for patients with chronic renal failure on dialysis, because the aluminum in ALTA can cause aluminum encephalopathy when it is not excreted effectively. We conducted this study to measure the serum aluminum concentrations and observe for symptoms relating to aluminum encephalopathy in dialysis patients after ALTA therapy. Ten dialysis patients underwent ALTA therapy for hemorrhoids. We measured their serum aluminum concentrations and observed them for possible symptoms of aluminum encephalopathy. The total injection volume of ALTA solution was 31 mL (24-37). The median serum aluminum concentration before ALTA therapy was 9 μg/L, which increased to 741, 377, and 103 μg/L, respectively, 1 h, 1 day, and 1 week after ALTA therapy. These levels decreased rapidly, to 33 μg/L by 1 month and 11 μg/L by 3 months after ALTA therapy. No patient suffered symptoms related to aluminum encephalopathy. Although the aluminum concentrations increased temporarily after ALTA therapy, dialysis patients with levels below 150 μg/L by 1 week and thereafter are considered to be at low risk of the development of aluminum encephalopathy.

Sodium and nutrition labelling: a qualitative study exploring New Zealand consumers' food purchasing behaviours.

PubMed

McLean, Rachael; Hoek, Janet

2014-05-01

Dietary sodium reduction is an important public health intervention that would reduce blood pressure and chronic disease. An understanding of how New Zealand consumers' food purchasing behaviour is influenced by perceptions of dietary sodium will inform future sodium-reduction strategies. The present qualitative study used in-depth interviews of adult consumers to explore consumer knowledge, understanding of food labels and food purchasing behaviour with respect to dietary sodium. New Zealand. A convenience sample of sixteen adult grocery shoppers. A thematic analysis of the transcripts showed New Zealand consumers lacked the background knowledge necessary to understand and regulate their own salt intake and were unable to interpret existing food labels with respect to dietary salt. The findings add further weight to calls for food labels that do not require background knowledge or numerical skills and highlight the need for population-based public health interventions. Education of New Zealand consumers on the health benefits of sodium reduction and how this may be achieved would complement this approach.

Understandings of Participation in Behavioural Research: A Qualitative Study of Gay and Bisexual Men in Scotland.

PubMed

Boydell, Nicola; Fergie, Gillian May; McDaid, Lisa Margaret; Hilton, Shona

2015-01-01

An array of empirical research has emerged related to public participation in health research. To date, few studies have explored the particular perspectives of gay and bisexual men taking part in behavioural surveillance research, which includes the donation of saliva swabs to investigate HIV prevalence and rates of undiagnosed HIV. Semi-structured interviews were conducted with twenty-nine gay and bisexual men in Scotland who had participated in a bar-based survey. Thematic analysis of men's accounts of their motives for participation and their perceptions of not receiving individual feedback on HIV status suggested a shared understanding of participation in research as a means of contributing to 'community' efforts to prevent the spread of HIV. Most men expressed sophisticated understandings of the purpose of behavioural research and distinguished between this and individual diagnostic testing. Despite calls for feedback on HIV results broadly, for these men feedback on HIV status was not deemed crucial.

Understandings of Participation in Behavioural Research: A Qualitative Study of Gay and Bisexual Men in Scotland

PubMed Central

McDaid, Lisa Margaret; Hilton, Shona

2015-01-01

An array of empirical research has emerged related to public participation in health research. To date, few studies have explored the particular perspectives of gay and bisexual men taking part in behavioural surveillance research, which includes the donation of saliva swabs to investigate HIV prevalence and rates of undiagnosed HIV. Semi-structured interviews were conducted with twenty-nine gay and bisexual men in Scotland who had participated in a bar-based survey. Thematic analysis of men’s accounts of their motives for participation and their perceptions of not receiving individual feedback on HIV status suggested a shared understanding of participation in research as a means of contributing to ‘community’ efforts to prevent the spread of HIV. Most men expressed sophisticated understandings of the purpose of behavioural research and distinguished between this and individual diagnostic testing. Despite calls for feedback on HIV results broadly, for these men feedback on HIV status was not deemed crucial. PMID:26252480

Warm Temperature Deformation Behavior and Processing Maps of 5182 and 7075 Aluminum Alloy Sheets with Fine Grains

NASA Astrophysics Data System (ADS)

Jang, D. H.; Kim, W. J.

2018-05-01

The tensile deformation behavior and processing maps of commercial 5182 and 7075 aluminum alloy sheets with similarly fine grain sizes (about 8 μm) were examined and compared over the temperature range of 423-723 K. The 5182 aluminum alloy with equiaxed grains exhibited larger strain rate sensitivity exponent ( m) values than the 7075 aluminum alloy with elongated grains under most of the testing conditions. The fracture strain behaviors of the two alloys as a function of strain rate and temperature followed the trend in their m values. In the processing maps, the power dissipation parameter values of the 5182 aluminum alloy were larger than those of the 7075 aluminum alloy and the instability domains of the 5182 aluminum alloy were smaller compared to that of the 7075 aluminum alloy, implying that the 5182 aluminum alloy had a better hot workability than the 7075 aluminum alloy.

Development of lightweight aluminum hollowcore solar cell array technology

NASA Technical Reports Server (NTRS)

Carlson, J. A.

1971-01-01

A baseline configuration for a three section folding array, with retraction capability, was developed which would utilize electroformed aluminum hollowcore substrates and beryllium frames. The three section array was not fabricated because of difficulties with impurities in the aluminum electroforming bath. A procedure was developed for etching the copper mandrel from virtually any size of aluminum hollowcore panel in approximately one hour. Procedures were developed for analyzing the content of peroxide, water, total aluminum, and lithium-aluminum-hydride in an aluminum electroforming solution.

High energy density aluminum battery

DOEpatents

Brown, Gilbert M.; Paranthaman, Mariappan Parans; Dai, Sheng; Dudney, Nancy J.; Manthiram, Arumugan; McIntyre, Timothy J.; Sun, Xiao-Guang; Liu, Hansan

2016-10-11

Compositions and methods of making are provided for a high energy density aluminum battery. The battery comprises an anode comprising aluminum metal. The battery further comprises a cathode comprising a material capable of intercalating aluminum or lithium ions during a discharge cycle and deintercalating the aluminum or lithium ions during a charge cycle. The battery further comprises an electrolyte capable of supporting reversible deposition and stripping of aluminum at the anode, and reversible intercalation and deintercalation of aluminum or lithium at the cathode.

The Oxidation Products of Aluminum Hydride and Boron Aluminum Hydride Clusters

DTIC Science & Technology

2016-01-04

AFRL-AFOSR-VA-TR-2016-0075 The Oxidation Products of Aluminum Hydride and Boron Aluminum Hydride Clusters KIT BOWEN JOHNS HOPKINS UNIV BALTIMORE MD...Hydride and Boron Aluminum Hydride Clusters 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-14-1-0324 5c.  PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) KIT...of both Aluminum Hydride Cluster Anions and Boron Aluminum Hydride Cluster Anions with Oxygen: Anionic Products The anionic products of reactions

Are we having fun yet? Fostering adherence to injury preventive exercise recommendations in young athletes.

PubMed

Keats, Melanie R; Emery, Carolyn A; Finch, Caroline F

2012-03-01

Sport and recreational activities are the leading cause of injury in youth, yet there is increasing evidence that many sport-related injuries are preventable. For injury prevention strategies to be effective, individuals must understand, adopt and adhere to the recommended prevention strategy or programme. Despite the recognized importance of a behavioural approach, the inclusion of behavioural change strategies in sport injury prevention has been historically neglected. The purpose of this commentary is to outline the rationale for the inclusion and application of behavioural science in reducing the burden of injury by increasing adherence to proven prevention strategies. In an effort to provide an illustrative example of a behavioural change approach, the authors suggest a specific plan for the implementation of a neuromuscular training strategy to reduce the risk of lower limb injury in youth sport. Given the paucity of evidence in the sport injury prevention setting, and the lack of application of theoretical frameworks to predicting adoption and adherence to injury preventive exercise recommendations in youth sport, data from the related physical activity promotion domain is utilized to describe how sound, theory-based injury prevention exercise interventions in youth may be developed. While the question of how to facilitate behavioural change and optimize adherence to preventive exercise recommendations remains an ongoing challenge, the authors detail several strategies based on two prominent behavioural theories to aid the reader in conceptualizing, designing and implementing effective interventions. Despite the minimal application of behavioural theory within the field of sport injury prevention in youth, behavioural science has the potential to make a significant impact on the understanding and prevention of youth sport injury. Appropriate evaluation of adherence and maintenance components based on models of behavioural change should be a critical component of future injury prevention research and practice.

Inferring Fish Escape Behaviour in Trawls Based on Catch Comparison Data: Model Development and Evaluation Based on Data from Skagerrak, Denmark

PubMed Central

Karlsen, Junita Diana

2014-01-01

During the fishing process, fish react to a trawl with a series of behaviours that often are species and size specific. Thus, a thorough understanding of fish behaviour in relation to fishing gear and a scientific understanding of the ability of different gear designs to utilize or stimulate various behavioural patterns during the catching process are essential for developing more efficient, selective, and environmentally friendly trawls. Although many behavioural studies using optical and acoustic observation systems have been conducted, harsh observation conditions on the fishing grounds often hamper the ability to directly observe fish behaviour in relation to fishing gear. As an alternative to optical and acoustic methods, we developed and applied a new mathematical model to catch data to extract detailed and quantitative information about species- and size-dependent escape behaviour in towed fishing gear such as trawls. We used catch comparison data collected with a twin trawl setup; the only difference between the two trawls was that a 12 m long upper section was replaced with 800 mm diamond meshes in one of them. We investigated the length-based escape behaviour of cod (Gadus morhua), haddock (Melanogrammus aeglefinus), saithe (Pollachius virens), witch flounder (Glyptocephalus cynoglossus), and lemon sole (Microstomus kitt) and quantified the extent to which behavioural responses set limits for the large mesh panel’s selective efficiency. Around 85% of saithe, 80% of haddock, 44% of witch flounder, 55% of lemon sole, and 55% of cod (below 68 cm) contacted the large mesh panel and escaped. We also demonstrated the need to account for potential selectivity in the trawl body, as it can bias the assessment of length-based escape behaviour. Our indirect assessment of fish behaviour was in agreement with the direct observations made for the same species in a similar section of the trawl body reported in the literature. PMID:24586403

Animal personality and state-behaviour feedbacks: a review and guide for empiricists.

PubMed

Sih, Andrew; Mathot, Kimberley J; Moirón, María; Montiglio, Pierre-Olivier; Wolf, Max; Dingemanse, Niels J

2015-01-01

An exciting area in behavioural ecology focuses on understanding why animals exhibit consistent among-individual differences in behaviour (animal personalities). Animal personality has been proposed to emerge as an adaptation to individual differences in state variables, leading to the question of why individuals differ consistently in state. Recent theory emphasizes the role that positive feedbacks between state and behaviour can play in producing consistent among-individual covariance between state and behaviour, hence state-dependent personality. We review the role of feedbacks in recent models of adaptive personalities, and provide guidelines for empirical testing of model assumptions and predictions. We discuss the importance of the mediating effects of ecology on these feedbacks, and provide a roadmap for including state-behaviour feedbacks in behavioural ecology research. Copyright © 2014 Elsevier Ltd. All rights reserved.

Factors that affect self-care behaviour of female high school students with dysmenorrhoea: a cluster sampling study.

PubMed

Chang, Shu-Fang; Chuang, Mei-hua

2012-04-01

The purpose of this study was to identify factors that affect the self-care behaviour of female high school students with dysmenorrhoea. This cross-sectional study utilized a questionnaire-based survey to understand the self-care behaviour of female high school students dysmenorrhoeal, along with the factors that affect this behaviour. A cluster random sampling method was adopted and questionnaires were used for data collection. Study participants experienced a moderate level of discomfort from dysmenorrhoea, and perceived dysmenorrhoea as serious. This investigation finds that cues to action raised perceived susceptibility to dysmenorrhoea and the perceived effectiveness of self-care behaviour and, therefore, increased the adoption of self-care behaviour. Hence, school nurses should offer female high school students numerous resources to apply correct self-care behaviour. © 2012 Blackwell Publishing Asia Pty Ltd.

The effect of zinc on the aluminum anode of the aluminum-air battery

NASA Astrophysics Data System (ADS)

Tang, Yougen; Lu, Lingbin; Roesky, Herbert W.; Wang, Laiwen; Huang, Baiyun

Aluminum is an ideal material for batteries, due to its excellent electrochemical performance. Herein, the effect of zinc on the aluminum anode of the aluminum-air battery, as an additive for aluminum alloy and electrolytes, has been studied. The results show that zinc can decrease the anodic polarization, restrain the hydrogen evolution and increase the anodic utilization rate.

Stochastic Approaches to Understanding Dissociations in Inflectional Morphology

ERIC Educational Resources Information Center

Plunkett, Kim; Bandelow, Stephan

2006-01-01

Computer modelling research has undermined the view that double dissociations in behaviour are sufficient to infer separability in the cognitive mechanisms underlying those behaviours. However, all these models employ "multi-modal" representational schemes, where functional specialisation of processing emerges from the training process.…

Cognitive behavioural interventions in addictive disorders.

PubMed

Sudhir, Paulomi M

2018-02-01

Cognitive behaviour therapy is a structured, time limited, psychological intervention that has is empirically supported across a wide variety of psychological disorders. CBT for addictive behaviours can be traced back to the application of learning theories in understanding addiction and subsequently to social cognitive theories. The focus of CBT is manifold and the focus is on targeting maintaining factors of addictive behaviours and preventing relapse. Relapse prevention programmes are based on social cognitive and cognitive behavioural principles. Interventions for preventing relapse include, behavioural strategies to decrease the valence of addictive behaviours, coping skills to deal with craving, arousal, negative mood states, assertiveness skills to manage social pressures, family psychoeducation and environmental manipulation and cognitive strategies to enhance self-efficacy beliefs and modification of outcome expectancies related to addictive behaviours. More recent developments in the area of managing addictions include third wave behaviour therapies. Third wave behaviour therapies are focused on improving building awareness, and distress tolerance skills using mindfulness practices. These approaches have shown promise, and more recently the neurobiological underpinnings of mindfulness strategies have been studied. The article provides an overview of cognitive behavioural approaches to managing addictions.

[Attachment Quality of Young Children with Mentally Ill Parents on the Example of the Munchausen by Proxy Syndrome].

PubMed

Ramberg, Axel; Feldkötter, Sinja

2015-01-01

One of the most discussed questions in clinical literature concerns the impact of child abuse by mentally ill parents (cf. Mattejat, 1998). It's obvious that most children cannot understand such a parental behaviour and that this lack of understanding along with the lack of knowledge about their parents' emotional disorder results in childrens' fear, disorientation and uncertainty. The consequences are massive interferences in the relationship between parents and children, who could develop an anxious-resistant insecure or even a disorganized/disoriented attachment. But how does a child react, if the behaviour of its parents is ambivalent itself and alternates from abuse to care? Such a parental behaviour is described as the "Munchausen by Proxy Syndrome". This article regards the effects of a "Munchausen by Proxy Syndrome" on the childrens' attachment development. After discussing the basic assumptions about the "Munchhauen by Proxy Syndrome" and the attachment theory we draw conclusions about the syndrome's effect on childrens' attachment behaviour.

A framework for understanding school based physical environmental influences on childhood obesity

PubMed Central

Harrison, Flo; Jones, Andrew P

2013-01-01

Schools are inviting settings for the promotion of healthy behaviours in children, and a number of interventions have been trialled to improve diet or increase physical activity levels with the ultimate aim of reducing the prevalence of obesity. However, these have seen mixed results and there is suggestion that consideration needs to be given to a broader definition of the school environment in order to encourage sustainable behaviour changes. This review considers evidence for associations between the physical school environment and diet, physical activity and adiposity. School environment covers the neighbourhood around the school as well as the school grounds, buildings and facilities. Reviewed evidence is used to construct a conceptual framework for understanding associations between the physical school environment and adiposity and related behaviours. The framework highlights how school environments may be modified to promote behaviour changes, and how they may limit or enhance the success of other school-based interventions. Consideration is also given to where future work may best be directed. PMID:22281440

Incorporating coping into an expectancy framework for explaining drinking behaviour.

PubMed

Hasking, Penelope A; Oei, Tian P S

2008-01-01

Expectancy Theory has offered much in the way of understanding alcohol use and abuse, and has contributed greatly to prevention and treatment initiatives. However although many cognitive-behavioural treatment approaches are based on expectancy constructs, such as outcome expectancies and self-efficacy, high relapse rates imply that expectancy theory may be too narrow in scope, and that additional variables need to be examined if a comprehensive understanding of drinking behaviour, and better treatment outcomes, are to be achieved. We suggest that the coping strategies an individual employs present one such set of variables that have largely been neglected from an expectancy framework. Although coping skills training is routinely used in prevention and treatment of alcohol problems, coping research has suffered from a poor theoretical framework. In this paper we review the existing research relating expectancies, self-efficacy and coping to drinking behaviour and propose a model which explains both social and dependent drinking, by incorporating coping into an expectancy theory framework. We also outline research and clinical implications of the proposed model.

The smell of change: warming affects species interactions mediated by chemical information.

PubMed

Sentis, Arnaud; Ramon-Portugal, Felipe; Brodeur, Jacques; Hemptinne, Jean-Louis

2015-10-01

Knowledge of how temperature influences an organism's physiology and behaviour is of paramount importance for understanding and predicting the impacts of climate change on species' interactions. While the behaviour of many organisms is driven by chemical information on which they rely on to detect resources, conspecifics, natural enemies and competitors, the effects of temperature on infochemical-mediated interactions remain largely unexplored. Here, we experimentally show that temperature strongly influences the emission of infochemicals by ladybeetle larvae, which, in turn, modifies the oviposition behaviour of conspecific females. Temperature also directly affects female perception of infochemicals and their oviposition behaviour. Our results suggest that temperature-mediated effects on chemical communication can influence flows across system boundaries (e.g. immigration and emigration) and thus alter the dynamics and stability of ecological networks. We therefore argue that investigating the effects of temperature on chemical communication is a crucial step towards a better understanding of the functioning of ecological communities facing rapid environmental changes. © 2015 John Wiley & Sons Ltd.

The importance of assessing behaviour and cognition in antiepileptic drug trials in children and adolescents.

PubMed

Lagae, Lieven

2017-06-01

It has long been recognised that uncontrolled childhood epilepsy is detrimental to cognition and behaviour, impacting on a patient's ability to succeed academically. Patients who experience more frequent and serious seizures are at greater risk for cognitive decline, emphasising the need for more effective epilepsy treatments to bring seizures under control. That said, although more effective antiepileptic drugs (AEDs) have the potential to limit the impact of uncontrolled seizures on cognitive and behavioural function, recently it has been acknowledged that deficits in these functions may be caused by AEDs themselves. The cognitive and behavioural effects of older-generation AEDs have been determined largely from AE reporting rather than from specific assessment. Recently, clinical trials of newer-generation AEDs, such as topiramate, levetiracetam and perampanel, have included standardised neuropsychological tests as outcome measures to assess their impact on cognition and behaviour in children and adolescents. However, to understand how we may limit the cognitive and behavioural side effects of AEDs, it is necessary for us to gain a fuller, more accurate, characterisation of their true impact. Such insight will depend on sophisticated and standardised approaches to the design of AED clinical trials. This review provides a general overview of our current understanding of the impact of both epilepsy and AEDs on cognition and behaviour, before focusing on the AEDs for which more detailed assessment, using standardised cognitive and behavioural measures, has been undertaken. We will then go on to discuss the key elements in the design of future AED clinical trials to address current unmet needs.

Patterns of multiple health risk-behaviours in university students and their association with mental health: application of latent class analysis.

PubMed

Kwan, M Y; Arbour-Nicitopoulos, K P; Duku, E; Faulkner, G

2016-08-01

University and college campuses may be the last setting where it is possible to comprehensively address the health of a large proportion of the young adult population. It is important that health promoters understand the collective challenges students are facing, and to better understand the broader lifestyle behavioural patterning evident during this life stage. The purpose of this study was to examine the clustering of modifiable health-risk behaviours and to explore the relationship between these identified clusters and mental health outcomes among a large Canadian university sample. Undergraduate students (n = 837; mean age = 21 years) from the University of Toronto completed the National College Health Assessment survey. The survey consists of approximately 300 items, including assessments of student health status, mental health and health-risk behaviours. Latent class analysis was used to identify patterning based on eight salient health-risk behaviours (marijuana use, other illicit drug use, risky sex, smoking, binge drinking, poor diet, physical inactivity, and insufficient sleep). A three-class model based on student behavioural patterns emerged: "typical," "high-risk" and "moderately healthy." Results also found high-risk students reporting significantly higher levels of stress than typical students (χ2(1671) = 7.26, p < .01). Students with the highest likelihood of engaging in multiple health-risk behaviours reported poorer mental health, particularly as it relates to stress. Although these findings should be interpreted with caution due to the 28% response rate, they do suggest that interventions targeting specific student groups with similar patterning of multiple health-risk behaviours may be needed.

Prevalence and severity of behavioural symptoms in patients with Korsakoff syndrome and other alcohol-related cognitive disorders: a systematic review.

PubMed

Gerridzen, Ineke J; Moerman-van den Brink, Wiltine G; Depla, Marja F; Verschuur, Els M L; Veenhuizen, Ruth B; van der Wouden, Johannes C; Hertogh, Cees M P M; Joling, Karlijn J

2017-03-01

Experiences from clinical practice suggest that behavioural symptoms in patients with Korsakoff syndrome (KS) are a frequent problem. Knowledge about behavioural symptoms is important in understanding and managing these symptoms. The aim of this study is to review the prevalence and severity of behavioural symptoms in KS. Relevant articles were identified by searching Medline (PubMed), PsycINFO, Embase and CINAHL up to 4 June 2014. Two reviewers independently selected the studies, extracted their baseline data and assessed methodological quality using a standardized checklist. Fifteen studies fulfilled the inclusion criteria. A diversity of diagnoses was used indicating that KS and other alcohol-related cognitive disorders and terms were used interchangeably. None of the studies were primarily designed to estimate the prevalence or severity of behavioural symptoms in patients with KS. Most studies had serious methodological limitations. The reported prevalence estimates of behavioural symptoms in the included studies varied strongly. Most prevalent were depressive symptoms and disorders (2-50%, median 27%) and agitation and aggression (10-54%, median 27%). None of the reported, mean severity estimates met pathological thresholds. The highest severity estimates were found for apathy. Good quality studies on behavioural symptoms in patients with KS are lacking. Observational research designed to provide reliable estimates of the prevalence and severity of behavioural symptoms in patients with KS is needed. This could improve understanding and managing these symptoms and help care staff to better support the needs of this specific patient group. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Caracterisation electrique de materiaux en composite pour fuselages d'avions

NASA Astrophysics Data System (ADS)

Tse, William

2011-12-01

In the last decade or so, the rise of oil price is being felt all over the world. Oil being one of the primary sources of energy highly exploited, it plays a great role in the today's world economy, especially in the transport domain. To remain competitive, companies striving in this domain need therefore to modify their approach in the design phase of new or improved products. In the aerospace industry for example, weight reduction in aircraft structures have become a primordial aspect in the design phase of new models making them lighter and more efficient. In the framework of this project, the research is related to new weight-reduction of structural materials used in aircrafts. As of today, much research effort has been undertaken to find good substitutes to replace the materials presently used (aluminum). Several materials such as aluminum-lithium and carbon fibre composite bring great interest as substitutes. This last one presents superior mechanical properties over aluminum such as lightweight and rigidity; its electrical properties though remain still ambiguous. The objective of this project, proposed by Bombardier Core EMC, is to find a way to characterize the composite in a conventional way that would allow an extraction of its electrical properties (permittivity (epsilonr), conductivity (sigma), etc). In this Master thesis, the existing studies and characterization approaches for the composite material are presented and discussed. These approaches will help anticipate the electrical behaviour of the composite material under test. A comparison between known elements (ex: aluminum) and the composite material will also be tackled in order to gauge its conductivity level, particularly for low frequencies (≈ MHz), and up to high frequencies (≈ 12 GHz). Finally, some tests have been simulated with electromagnetic modelling software in order to reproduce and validate the experimental results. At the end of the thesis, a discussion/conclusion presenting the results and validating their integrity is given. The results enable us to do an estimation of the composite's conductivity and to observe its attenuation properties in function of the frequency. The tests were made with composite laminated panels without wire mesh. The wire mesh here is a copper matrix integrated at the exterior surface of the composite for added electromagnetic protection.

Method of winning aluminum metal from aluminous ore

DOEpatents

Loutfy, R.O.; Keller, R.; Yao, N.P.

Aluminous ore such as bauxite containing alumina is blended with coke or other suitable form of carbon and reacted with sulfur gas at an elevated temperature. For handling, the ore and coke can be extruded into conveniently sized pellets. The reaction with sulfur gas produces molten aluminum sulfide which is separated from residual solid reactants and impurities. The aluminum sulfide is further increased in temperature to cause its decomposition or sublimation, yielding aluminum subsulfide liquid (A1S) and sulfur gas that is recycled. The aluminum monosulfide is then cooled to below its disproportionation temperature to again form molten aluminum sulfide and aluminum metal. A liquid-liquid or liquid-solid separation, depending on the separation temperature, provides product aluminum and aluminum sulfide for recycle to the disproportionation step.

Chronic aluminum intake causes Alzheimer's disease: applying Sir Austin Bradford Hill's causality criteria.

PubMed

Walton, J R

2014-01-01

Industrialized societies produce many convenience foods with aluminum additives that enhance various food properties and use alum (aluminum sulfate or aluminum potassium sulfate) in water treatment to enable delivery of large volumes of drinking water to millions of urban consumers. The present causality analysis evaluates the extent to which the routine, life-long intake, and metabolism of aluminum compounds can account for Alzheimer's disease (AD), using Austin Bradford Hill's nine epidemiological and experimental causality criteria, including strength of the relationship, consistency, specificity, temporality, dose-dependent response, biological rationale, coherence with existing knowledge, experimental evidence, and analogy. Mechanisms that underlie the risk of low concentrations of aluminum relate to (1) aluminum's absorption rates, allowing the impression that aluminum is safe to ingest and as an additive in food and drinking water treatment, (2) aluminum's slow progressive uptake into the brain over a long prodromal phase, and (3) aluminum's similarity to iron, in terms of ionic size, allows aluminum to use iron-evolved mechanisms to enter the highly-active, iron-dependent cells responsible for memory processing. Aluminum particularly accumulates in these iron-dependent cells to toxic levels, dysregulating iron homeostasis and causing microtubule depletion, eventually producing changes that result in disconnection of neuronal afferents and efferents, loss of function and regional atrophy consistent with MRI findings in AD brains. AD is a human form of chronic aluminum neurotoxicity. The causality analysis demonstrates that chronic aluminum intake causes AD.

Why is changing health-related behaviour so difficult?

PubMed Central

Kelly, M.P.; Barker, M.

2016-01-01

Objective to demonstrate that six common errors made in attempts to change behaviour have prevented the implementation of the scientific evidence base derived from psychology and sociology; to suggest a new approach which incorporates recent developments in the behavioural sciences. Study design the role of health behaviours in the origin of the current epidemic of non-communicable disease is observed to have driven attempts to change behaviour. It is noted that most efforts to change health behaviours have had limited success. This paper suggests that in medicine and policy making, discussions about behaviour change are subject to six common errors and that these errors have made the business of health-related behaviour change much more difficult than it needs to be. Methods overview of policy and practice attempts to change health related behaviour. Results the reasons why knowledge and learning about behaviour have made so little progress in non-communicable disease prevention are considered, and an alternative way of thinking about the behaviours involved is suggested. This model harnesses recent developments in the behavioural sciences. Conclusion it is important to understand the conditions preceding behaviour psychologically and sociologically and to combine psychological ideas about the automatic and reflective systems with sociological ideas about social practice. PMID:27184821

40 CFR 421.20 - Applicability: description of the primary aluminum smelting subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... primary aluminum smelting subcategory. 421.20 Section 421.20 Protection of Environment ENVIRONMENTAL... CATEGORY Primary Aluminum Smelting Subcategory § 421.20 Applicability: description of the primary aluminum... production of aluminum from alumina in the Hall-Heroult process. ...

Ignition and combustion of metallized propellants

NASA Technical Reports Server (NTRS)

Turns, Stephen R.

1991-01-01

The overall objective is the development of a fundamental understanding of the ignition and combustion of aluminum-based slurry (or gel) propellant droplets using a combination of experiment and analysis. Specific objectives are the following: (1) The development and application of a burner/spray rig and single particle optical diagnosis to study the detailed ignition and combustion behavior of small droplets; (2) Understanding the role of surfactants and gellants (or other additives) in promoting or inhibiting secondary atomization of propellant droplets; and (3) The extension of previously developed analytical models and the development of new models to address the phenomena associated with microexplosions (secondary atomization).

From kissing to belly stridulation: comparative analysis reveals surprising diversity, rapid evolution, and much homoplasy in the mating behaviour of 27 species of sepsid flies (Diptera: Sepsidae).

PubMed

Puniamoorthy, N; Ismail, M R B; Tan, D S H; Meier, R

2009-11-01

Our understanding of how fast mating behaviour evolves in insects is rather poor due to a lack of comparative studies among insect groups for which phylogenetic relationships are known. Here, we present a detailed study of the mating behaviour of 27 species of Sepsidae (Diptera) for which a well-resolved and supported phylogeny is available. We demonstrate that mating behaviour is extremely diverse in sepsids with each species having its own mating profile. We define 32 behavioural characters and document them with video clips. Based on sister species comparisons, we provide several examples where mating behaviour evolves faster than all sexually dimorphic morphological traits. Mapping the behaviours onto the molecular tree reveals much homoplasy, comparable to that observed for third positions of mitochondrial protein-encoding genes. A partitioned Bremer support (PBS) analysis reveals conflict between the molecular and behavioural data, but behavioural characters have higher PBS values per parsimony-informative character than DNA sequence characters.

Prolonged secretion of cortisol as a possible mechanism underlying stress and depressive behaviour

PubMed Central

Qin, Dong-dong; Rizak, Joshua; Feng, Xiao-li; Yang, Shang-chuan; Lü, Long-bao; Pan, Lei; Yin, Yong; Hu, Xin-tian

2016-01-01

Stress is associated with the onset of depressive episodes, and cortisol hypersecretion is considered a biological risk factor of depression. However, the possible mechanisms underlying stress, cortisol and depressive behaviours are inconsistent in the literature. This study examined the interrelationships among stress, cortisol and observed depressive behaviours in female rhesus macaques for the first time and explored the possible mechanism underlying stress and depressive behaviour. Female monkeys were video-recorded, and the frequencies of life events and the duration of huddling were analysed to measure stress and depressive behaviour. Hair samples were used to measure chronic cortisol levels, and the interactions between stress and cortisol in the development of depressive behaviour were further evaluated. Significant correlations were found between stress and depressive behaviour measures and between cortisol levels and depressive behaviour. Stress was positively correlated with cortisol levels, and these two factors interacted with each other to predict the monkeys’ depressive behaviours. This finding extends the current understanding of stress/cortisol interactions in depression, especially pertaining to females. PMID:27443987

A strong genetic correlation underlying a behavioural syndrome disappears during development because of genotype–age interactions

PubMed Central

Class, Barbara; Brommer, Jon E.

2015-01-01

In animal populations, as in humans, behavioural differences between individuals that are consistent over time and across contexts are considered to reflect personality, and suites of correlated behaviours expressed by individuals are known as behavioural syndromes. Lifelong stability of behavioural syndromes is often assumed, either implicitly or explicitly. Here, we use a quantitative genetic approach to study the developmental stability of a behavioural syndrome in a wild population of blue tits. We find that a behavioural syndrome formed by a strong genetic correlation of two personality traits in nestlings disappears in adults, and we demonstrate that genotype–age interaction is the likely mechanism underlying this change during development. A behavioural syndrome may hence change during organismal development, even when personality traits seem to be strongly physiologically or functionally linked in one age group. We outline how such developmental plasticity has important ramifications for understanding the mechanistic basis as well as the evolutionary consequences of behavioural syndromes. PMID:26041348

Personality, Alzheimer's disease and behavioural and cognitive symptoms of dementia: the PACO prospective cohort study protocol.

PubMed

Rouch, Isabelle; Dorey, Jean-Michel; Boublay, Nawèle; Henaff, Marie-Anne; Dibie-Racoupeau, Florence; Makaroff, Zaza; Harston, Sandrine; Benoit, Michel; Barrellon, Marie-Odile; Fédérico, Denis; Laurent, Bernard; Padovan, Catherine; Krolak-Salmon, Pierre

2014-10-10

Alzheimer's disease is characterised by a loss of cognitive function and behavioural problems as set out in the term "Behavioural and Psychological Symptoms of Dementia". These behavioural symptoms have heavy consequences for the patients and their families. A greater understanding of behavioural symptoms risk factors would allow better detection of those patients, a better understanding of crisis situations and better management of these patients. Some retrospective studies or simple observations suggested that personality could play a role in the occurrence of behavioural symptoms. Finally, performance in social cognition like facial recognition and perspective taking could be linked to certain personality traits and the subsequent risks of behavioural symptoms. We propose to clarify this through a prospective, multicentre, multidisciplinary study. Main Objective: -To assess the effect of personality and life events on the risk of developing behavioural symptoms. Secondary Objectives: -To evaluate, at the time of inclusion, the connection between personality and performance in social cognition tests; -To evaluate the correlation between performance in social cognition at inclusion and the risks of occurrence of behavioural symptoms; -To evaluate the correlation between regional cerebral atrophy, using brain Magnetic Resonance Imaging at baseline, and the risk of behavioural symptoms. Study type and Population: Prospective multicentre cohort study with 252 patients with Alzheimer's disease at prodromal or mild dementia stage. The inclusion period will be of 18 months and the patients will be followed during 18 months. The initial evaluation will include: a clinical and neuropsychological examination, collection of behavioural symptoms data (Neuropsychiatric-Inventory scale) and their risk factors, a personality study using both a dimensional (personality traits) and categorical approach, an inventory of life events, social cognition tests and an Magnetic Resonance Imaging. Patients will be followed every 6 months (clinical examination and collection of behavioural symptoms data and risk factors) during 18 months. This study aims at better identifying the patients with Alzheimer's disease at high risk of developing behavioural symptoms, to anticipate, detect and quickly treat these disorders and so, prevent serious consequences for the patient and his caregivers. ClincalTrials.gov: NCT01297140.

Our bodies are our own: resistance to ABC-based HIV-prevention programmes in northern Tanzanian conservation organisations.

PubMed

Reid-Hresko, John

2014-01-01

ABC-based HIV-prevention programmes have been widely employed in northern Tanzanian wildlife conservation settings in an attempt to (re)shape the sexual behaviours of conservation actors. Utilising findings from 66 semi-structured interviews conducted in 2009-2010, this paper examines ABC prevention as a form of Foucauldian governmentality--circulating technologies of power that mobilise disciplinary technologies and attempt to transform such efforts into technologies of the self--and explores how individuals understand and respond to attempts to govern their behaviour. ABC regimes attempt to rework subjectivity, positioning HIV-related behaviours within a risk-based neoliberal rationality. However, efforts to use ABC as a technology to govern populations and individual bodies are largely incommensurate with existing Tanzanian sociocultural formations, including economic and gendered inequalities, and local understandings of sexuality. The language research participants used to talk about ABC and the justifications they offered for non-compliance illuminate this discrepancy. Data reveal that the recipients of ABC campaigns are active producers of understandings that work for them in their lives, but may not produce the behavioural shifts envisioned by programme goals. These findings corroborate previous research, which questions the continued plausibility of ABC as a stand-alone HIV- prevention framework.

Metallurgical Mechanisms Controlling Mechanical Properties of Aluminum Alloy 2219 Produced by Electron Beam Freeform Fabrication

NASA Technical Reports Server (NTRS)

Domack, Marcia S.; Tainger, Karen M.

2006-01-01

The electron beam freeform fabrication (EBF3) layer-additive manufacturing process has been developed to directly fabricate complex geometry components. EBF3 introduces metal wire into a molten pool created on the surface of a substrate by a focused electron beam. Part geometry is achieved by translating the substrate with respect to the beam to build the part one layer at a time. Tensile properties demonstrated for electron beam deposited aluminum and titanium alloys are comparable to wrought products, although the microstructures of the deposits exhibit cast features. Understanding the metallurgical mechanisms controlling mechanical properties is essential to maximizing application of the EBF3 process. Tensile mechanical properties and microstructures were examined for aluminum alloy 2219 fabricated over a range of EBF3 process variables. Unique microstructures were observed within the deposited layers and at interlayer boundaries, which varied within the deposit height due to microstructural evolution associated with the complex thermal history experienced during subsequent layer deposition. Microstructures exhibited irregularly shaped grains with interior dendritic structures, described based on overall grain size, morphology, distribution, and dendrite spacing, and were correlated with deposition parameters. Fracture features were compared with microstructural elements to define fracture paths and aid in definition of basic processing-microstructure-property correlations.

Boron reduces aluminum-induced growth inhibition, oxidative damage and alterations in the cell wall components in the roots of trifoliate orange.

PubMed

Riaz, Muhammad; Yan, Lei; Wu, Xiuwen; Hussain, Saddam; Aziz, Omar; Imran, Muhammad; Rana, Muhammad Shoaib; Jiang, Cuncang

2018-05-30

Aluminum (Al) toxicity is a major restriction for crops production on acidic soils. The primary symptom of aluminum toxicity is visible in the roots of plants. Recently, several studies reported the alleviation of Al toxicity by the application of Boron (B), however, the information how B alleviates Al toxicity is not well understood. Thus, we investigated the ameliorative response of B on Al-induced growth inhibition, oxidative damages, and variations in the cell wall components in trifoliate orange roots. The results indicated that plants under Al stress experienced a substantial decrement in root length and overall plant growth. The supply of B improved the root elongation by eliminating oxidative stress, membrane peroxidation, membrane leakage, and cell death produced under Al toxicity. Moreover, accumulation of Al on the cell wall and alteration in the cell wall components might be one of the causes resulting in the quick inhibition of root elongation under B-starvation circumstances by providing susceptible negative charges on pectin matrix for binding of Al. The results provide a useful understanding of the insight into mechanisms of B-induced mitigation of Al toxicity especially in the trifoliate orange that might be helpful in the production of crops on acidic soils. Copyright © 2018 Elsevier Inc. All rights reserved.

Ultrasonic guided wave propagation across waveguide transitions: energy transfer and mode conversion.

PubMed

Puthillath, Padmakumar; Galan, Jose M; Ren, Baiyang; Lissenden, Cliff J; Rose, Joseph L

2013-05-01

Ultrasonic guided wave inspection of structures containing adhesively bonded joints requires an understanding of the interaction of guided waves with geometric and material discontinuities or transitions in the waveguide. Such interactions result in mode conversion with energy being partitioned among the reflected and transmitted modes. The step transition between an aluminum layer and an aluminum-adhesive-aluminum multi-layer waveguide is analyzed as a model structure. Dispersion analysis enables assessment of (i) synchronism through dispersion curve overlap and (ii) wavestructure correlation. Mode-pairs in the multi-layer waveguide are defined relative to a prescribed mode in a single layer as being synchronized and having nearly perfect wavestructure matching. Only a limited number of mode-pairs exist, and each has a unique frequency range. A hybrid model based on semi-analytical finite elements and the normal mode expansion is implemented to assess mode conversion at a step transition in a waveguide. The model results indicate that synchronism and wavestructure matching is associated with energy transfer through the step transition, and that the energy of an incident wave mode in a single layer is transmitted almost entirely to the associated mode-pair, where one exists. This analysis guides the selection of incident modes that convert into transmitted modes and improve adhesive joint inspection with ultrasonic guided waves.

Surface Roughening Behavior of 6063 Aluminum Alloy during Bulging by Spun Tubes

PubMed Central

Cai, Yang; Wang, Xiaosong; Yuan, Shijian

2017-01-01

Severe surface roughening during the hydroforming of aluminum alloy parts can produce surface defects that severely restrict their application in the automobile and aerospace industry. To understand the relation between strain, grain size and surface roughness under biaxial stress conditions, hydro-bulging tests of aluminum alloy tubes were carried out, and the tubes with different grain sizes were prepared by a spinning and annealing process. The surface roughness was measured by a laser scanning confocal microscope to evaluate the surface roughening macroscopical behavior, and the corresponding microstructures were observed using electron back-scattered diffraction (EBSD) to reveal the roughening microscopic behavior. The results obtained show that the surface roughness increased with both strain and grain size under biaxial stress. No surface defects were observed on the surface when the grain size was less than 105 μm if the strain was less than 18%, or when the grain size was between 130 and 175 μm if the strain was less than 15.88% and 7.15%, respectively. The surface roughening microscopic behavior was identified as an inhomogeneous grain size distribution, which became more pronounced with increasing grain size and resulted in greater local deformation. Concentrated grain orientation also results in severe inhomogeneous deformation during plastics deformation, and serious surface roughening. PMID:28772658

Management of chronic (post-viral) fatigue syndrome.

PubMed Central

Wessely, S; David, A; Butler, S; Chalder, T

1989-01-01

Simple rehabilitative strategies are proposed to help patients with the chronic fatigue syndrome. A model is outlined of an acute illness giving way to a chronic fatigue state in which symptoms are perpetuated by a cycle of inactivity, deterioration in exercise tolerance and further symptoms. This is compounded by the depressive illness that is often part of the syndrome. The result is a self-perpetuating cycle of exercise avoidance. Effective treatment depends upon an understanding of the interaction between physical and psychological factors. Cognitive behavioural therapy is suggested. Cognitive therapy helps the patient understand how genuine symptoms arise from the frequent combination of physical inactivity and depression, rather than continuing infection, while a behavioural approach enables the treatment of avoidance behaviour and a gradual return to normal physical activity. PMID:2553945

Use of low-cost aluminum in electric energy production

NASA Astrophysics Data System (ADS)

Zhuk, Andrey Z.; Sheindlin, Alexander E.; Kleymenov, Boris V.; Shkolnikov, Eugene I.; Lopatin, Marat Yu.

Suppression of the parasitic corrosion while maintaining the electrochemical activity of the anode metal is one of the serious problems that affects the energy efficiency of aluminum-air batteries. The need to use high-purity aluminum or special aluminum-based alloys results in a significant increase in the cost of the anode, and thus an increase in the total cost of energy generated by the aluminum-air battery, which narrows the range of possible applications for this type of power source. This study considers the process of parasitic corrosion as a method for hydrogen production. Hydrogen produced in an aluminum-air battery by this way may be further employed in a hydrogen-air fuel cell (Hy-air FC) or in a heat engine, or it may be burnt to generate heat. Therefore, anode materials may be provided by commercially pure aluminum, commercially produced aluminum alloys, and secondary aluminum. These materials are much cheaper and more readily available than special anode alloys of aluminum and high-purity aluminum. The aim of present study is to obtain experimental data for comparison of energy and cost parameters of some commercially produced aluminum alloys, of high-purity aluminum, and of a special Al-ln anode alloy in the context of using these materials as anodes for an Al-air battery and for combined production of electrical power and hydrogen.

Parenteral drug products containing aluminum as an ingredient or a contaminant: Response to Food and Drug Administration notice of intent and request for information. ASCN/A. S. P. E. N. Working Group on Standards for Aluminum Content of Parenteral Nutrition Solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-03-01

Aluminum remains a significant contaminant of total parenteral nutrition (TPN) solutions and may be elevated in bone, urine, and plasma of infants receiving TPN. Aluminum accumulation in tissues of uremic patients and adult TPN patients has been associated with low-turnover bone disease. Furthermore, aluminum has also been linked with encephalopathy and anemia in uremic patients and with hepatic cholestasis in experimental animals. Because of the toxic effects of aluminum, the Food and Drug Administration (FDA) recently published a notice of intent to set an upper limit of 25 micrograms/L for aluminum in large-volume parenterals and to require manufacturers of small-volumemore » parenterals, such as calcium and phosphate salts, to measure aluminum content and note this content on the package label. The ASCN/A.S.P.E.N. Working Group on Standards for Aluminum Content of Parenteral Nutrition Solutions supports these intentions and further urges the FDA to require that cumulative aluminum intake in terms of safe, unsafe, and toxic quantities of aluminum per kilogram be made known to physicians and pharmacists preparing the TPN solutions, to ensure that manufacturers use appropriate control procedures in aluminum measurements, and to employ a standard unit of aluminum measurement.« less

40 CFR 466.30 - Applicability; description of the aluminum basis material subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... aluminum basis material subcategory. 466.30 Section 466.30 Protection of Environment ENVIRONMENTAL... Aluminum Basis Material Subcategory § 466.30 Applicability; description of the aluminum basis material... into publicly owned treatment works from porcelain enameling of aluminum basis materials. ...

Undergraduate nursing students' perceptions of the effectiveness of clinical teaching behaviours in Malaysia: A cross-sectional, correlational survey.

PubMed

Ludin, Salizar Mohamed; Fathullah, Nik Mohamed Nik

2016-09-01

Clinical teachers are a critical determinant of the quality of nursing students' clinical learning experiences. Understanding students' perceptions of clinical teachers' behaviours can provide the basis for recommendations that will help improve the quality of clinical education in clinical settings by developing better clinical teachers. To understand clinical teaching behaviours and their influence on students' learning from the perspective of undergraduate nursing students. A cross-sectional, correlational survey. A nursing faculty in Kuantan, Pahang, Malaysia. A sample of 120/154 (78%) students from Year 2-Year 4 were recruited according to set criteria. A self-administered questionnaire was employed to collect demographic data, and students' perceptions of clinical teaching behaviours and their impact on learning using the Nursing Clinical Teaching Effectiveness Inventory (NCTEI). Year 3 and 4 students perceived faculty clinical teaching behaviours positively. There was a significant association between clinical teaching behaviours and their influence on students' clinical learning. Teachers' competence rated as the most significant influential factor, while teachers' personality rated as least influential. Participants were able to identify the attributes of good clinical teachers and which attributes had the most influence on their learning. Overall, they perceived their teachers as providing good clinical teaching resulting in good clinical learning. Novice clinical teachers and nursing students can use this positive association between teaching behaviours and quality of clinical learning as a guide to clinical teaching and learning. Copyright © 2016 Elsevier Ltd. All rights reserved.

Developmental origins, behaviour change and the new public health.

PubMed

Barker, M

2015-10-01

A developmental approach to public health focuses attention on better nourishing girls and young women, especially those of low socio-economic status, to improve mothers' nutrition and thereby the health of future generations. There have been significant advances in the behavioural sciences that may allow us to understand and support dietary change in young women and their children in ways that have not previously been possible. This paper describes some of these advances and aims to show how they inform this new approach to public health. The first of these has been to work out what is effective in supporting behaviour change, which has been achieved by careful and detailed analysis of behaviour change techniques used by practitioners in intervention, and of the effectiveness of these in supporting change. There is also a new understanding of the role that social and physical environments play in shaping our behaviours, and that behaviour is influenced by automatic processes and 'habits' as much as by reflective processes and rational decisions. To be maximally effective, interventions therefore have to address both influences on behaviour. An approach developed in Southampton aims to motivate, support and empower young women to make better food choices, but also to change the culture in which those choices are being made. Empowerment is the basis of the new public health. An empowered public demand for better access to better food can go a long way towards improving maternal, infant and family nutrition, and therefore the health of generations to come.

Food-induced brain responses and eating behaviour.

PubMed

Smeets, Paul A M; Charbonnier, Lisette; van Meer, Floor; van der Laan, Laura N; Spetter, Maartje S

2012-11-01

The brain governs food intake behaviour by integrating many different internal and external state and trait-related signals. Understanding how the decisions to start and to stop eating are made is crucial to our understanding of (maladaptive patterns of) eating behaviour. Here, we aim to (1) review the current state of the field of 'nutritional neuroscience' with a focus on the interplay between food-induced brain responses and eating behaviour and (2) highlight research needs and techniques that could be used to address these. The brain responses associated with sensory stimulation (sight, olfaction and taste), gastric distension, gut hormone administration and food consumption are the subject of increasing investigation. Nevertheless, only few studies have examined relations between brain responses and eating behaviour. However, the neural circuits underlying eating behaviour are to a large extent generic, including reward, self-control, learning and decision-making circuitry. These limbic and prefrontal circuits interact with the hypothalamus, a key homeostatic area. Target areas for further elucidating the regulation of food intake are: (eating) habit and food preference formation and modification, the neural correlates of self-control, nutrient sensing and dietary learning, and the regulation of body adiposity. Moreover, to foster significant progress, data from multiple studies need to be integrated. This requires standardisation of (neuroimaging) measures, data sharing and the application and development of existing advanced analysis and modelling techniques to nutritional neuroscience data. In the next 20 years, nutritional neuroscience will have to prove its potential for providing insights that can be used to tackle detrimental eating behaviour.

The behaviours of nurses that increase student accountability for learning in clinical practice: An integrative review.

PubMed

Perry, Christina; Henderson, Amanda; Grealish, Laurie

2018-06-01

To identify nurses' behaviours that promote student accountability for learning in clinical practice. Health care services are experiencing significant strain in meeting clinical education requirements of increasing numbers of nursing students enrolled in undergraduate nursing programs. Internationally, the transition to university based education for nurses has seen the emergence of issues for busy clinicians trying to manage increasing workloads with responsibility for student learning. An understanding of what types of supervisor behaviours promote student accountability for learning, may support clinicians to more effectively manage their dual roles of clinical care and student support. An integrative approach was adopted for this review. A search of the Cumulative Index of Nursing and Allied Health Literature, Pubmed, Scopus and Embase was undertaken, limited to articles published between 2000 and March 2017. Whittemore and Knafls' (2005) framework for conducting integrative reviews was used to ensure a methodological and rigorous approach. Nine studies were considered. Behaviours emerged in relation to four themes including: belongingness associated with a genuine partnership; empowerment and increasing student self-efficacy; trust linked to increasing and staged independence; and balancing clinical and educational requirements. Behaviours of nurses significantly influence students' accountability for learning and accordingly, their ability to be adequately prepared for professional nursing practice. Understanding behaviours that impact on students' approach to clinical placement can guide nurses in their approach to facilitating student learning, in particular, behaviours that increase student responsibility and independence over the continuum of clinical education. Copyright © 2018 Elsevier Ltd. All rights reserved.

Developmental origins, behaviour change and the new public health

PubMed Central

Barker, Mary

2016-01-01

A developmental approach to public health focuses attention on better nourishing girls and young women, especially those of low socio-economic status, to improve mothers’ nutrition and thereby the health of future generations. There have been significant advances in the behavioural sciences that may allow us to understand and support dietary change in young women and their children in ways that have not previously been possible. This paper describes some of these advances and aims to show how they inform this new approach to public health. The first of these has been to work out what is effective in supporting behaviour change which has been achieved by careful and detailed analysis of behaviour change techniques used by practitioners in intervention, and of the effectiveness of these in supporting change. There is also a new understanding of the role that social and physical environments play in shaping our behaviours, and that behaviour is influenced by automatic processes and ‘habits’ as much as by reflective processes and rational decisions. To be maximally effective, interventions therefore have to address both influences on behaviour. An approach developed in Southampton aims to motivate, support and empower young women to make better food choices, but also to change the culture in which those choices are being made. Empowerment is the basis of the new public health. An empowered public demand for better access to better food can go a long way towards improving maternal, infant and family nutrition, and therefore the health of generations to come. PMID:26152930

Fluxing agent for metal cast joining

DOEpatents

Gunkel, Ronald W.; Podey, Larry L.; Meyer, Thomas N.

2002-11-05

A method of joining an aluminum cast member to an aluminum component. The method includes the steps of coating a surface of an aluminum component with flux comprising cesium fluoride, placing the flux coated component in a mold, filling the mold with molten aluminum alloy, and allowing the molten aluminum alloy to solidify thereby joining a cast member to the aluminum component. The flux preferably includes aluminum fluoride and alumina. A particularly preferred flux includes about 60 wt. % CsF, about 30 wt. % AlF.sub.3, and about 10 wt. % Al.sub.2 O.sub.3.

Tethers as Debris: Hydrocode Simulation of Impacts of Polymer Tether Fragments on Aluminum Plates

NASA Technical Reports Server (NTRS)

Evans, Steven W.

2003-01-01

Tethers promise to find use in a variety of space applications. Despite being narrow objects, their great lengths result in them having large total areas. Consequently, tethers are very susceptible to being severed by orbital debris. Extensive work has been done designing tethers that resist severs by small debris objects, in order to lengthen their working lives. It is from this perspective that most recent work has considered the tether - debris question. The potential of intact tethers, or severed tether fragments, as debris, to pose a significant collision risk to other spacecraft has been less well studied. Understanding the consequences of such collisions is important in assessing the risks tethers pose to other spacecraft. This paper discusses the damage that polymer tethers may produce on aluminum plates, as revealed by hypervelocity impact simulations using the SPHC hydrodynamic code.

Vibration Response Models of a Stiffened Aluminum Plate Excited by a Shaker

NASA Technical Reports Server (NTRS)

Cabell, Randolph H.

2008-01-01

Numerical models of structural-acoustic interactions are of interest to aircraft designers and the space program. This paper describes a comparison between two energy finite element codes, a statistical energy analysis code, a structural finite element code, and the experimentally measured response of a stiffened aluminum plate excited by a shaker. Different methods for modeling the stiffeners and the power input from the shaker are discussed. The results show that the energy codes (energy finite element and statistical energy analysis) accurately predicted the measured mean square velocity of the plate. In addition, predictions from an energy finite element code had the best spatial correlation with measured velocities. However, predictions from a considerably simpler, single subsystem, statistical energy analysis model also correlated well with the spatial velocity distribution. The results highlight a need for further work to understand the relationship between modeling assumptions and the prediction results.

First principles determination of dislocation properties.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, John C.

2003-12-01

This report details the work accomplished on first principles determination of dislocation properties. It contains an introduction and three chapters detailing three major accomplishments. First, we have used first principle calculations to determine the shear strength of an aluminum twin boundary. We find it to be remarkably small ({approx}17 mJ/m{sup 2}). This unexpected result is explained and will likely pertain for many other grain boundaries. Second, we have proven that the conventional explanation for finite grain boundary facets is wrong for a particular aluminum grain boundary. Instead of finite facets being stabilized by grain boundary stress, we find them tomore » originate from kinetic effects. Finally we report on a new application of the Frenkel-Kontorova model to understand reconstructions of (100) type surfaces. In addition to the commonly accepted formation of rectangular dislocation arrays, we find numerous other possible solutions to the model including hexagonal reconstructions and a clock-rotated structure.« less

Lifetime costing of the body-in-white: Steel vs. aluminum

NASA Astrophysics Data System (ADS)

Han, Helen N.; Clark, Joel P.

1995-05-01

In order to make informed material choice decisions and to derive the maximum benefit from the use of alternative materials, the automobile producer must understand the full range of costs and benefits for each material. It is becoming clear that the conventional cost-benefit analysis structure currently used by the automotive industry must be broadened to include nontraditional costs such as the environmental externalities associated with the use of existing and potential automotive technologies. This article develops a methodology for comparing the costs and benefits associated with the use of alternative materials in automotive applications by focusing on steel and aluminum in the unibody body-in-white. Authors' Note: This is the first of two articles documenting a methodology for evaluating the lifetime monetary and environmental costs of alternative materials in automotive applications. This article addresses the traditional money costs while a subsequent paper, which is planned for the August issue, will address the environmental externalities.

Role of Tool Shoulder End Features on Friction Stir Weld Characteristics of 6082 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Mugada, Krishna Kishore; Adepu, Kumar

2018-03-01

Understanding the temperature generation around the tool shoulder contact is one of the important aspects of the friction stir welding process. In the present study, the effects of various tool shoulder end feature on the temperature and mechanical properties of the 6082 aluminum alloy were investigated. The experimental results show that the axial force during the welding is considerably reduced by using tools with shoulder end features. The detailed observation revealed that around the tool shoulder contact, the amount of heat generation is higher between trialing edge (TE) to retreating side-leading edge corner (RS-LE) counter clockwise direction and lower between RS-LE to TE clockwise direction. Out of the four shoulder end featured tools, the welds produced with ridges shoulder tool resulted in superior properties with significantly lower axial force (approximately 32%) compared to plane shoulder tool.

STUDY OF THERMAL SENSITIVITY AND THERMAL EXPLOSION VIOLENCE OF ENERGETIC MATERIALS IN THE LLNL ODTX SYSTEM

DOE Office of Scientific and Technical Information (OSTI.GOV)

HSU, P C; Hust, G; May, C

Some energetic materials may explode at fairly low temperatures and the violence from thermal explosion may cause a significant damage. Thus it is important to understand the response of energetic materials to thermal insults for safe handling and storage of energetic materials. The One Dimensional Time to Explosion (ODTX) system at the Lawrence Livermore National Laboratory can measure times to explosion, lowest explosion temperatures, and determine kinetic parameters of energetic materials. Samples of different configurations can be tested in the system. The ODTX testing can also generate useful data for determining thermal explosion violence of energetic materials. We also performedmore » detonation experiments of LX-10 in aluminum anvils to determine the detonation violence and validated the Zerilli Armstrong aluminum model. Results of the detonation experiments agreed well with the model prediction.« less

Primary and secondary creep in aluminum alloys as a solid state transformation

NASA Astrophysics Data System (ADS)

Fernández, R.; Bruno, G.; González-Doncel, G.

2016-08-01

Despite the massive literature and the efforts devoted to understand the creep behavior of aluminum alloys, a full description of this phenomenon on the basis of microstructural parameters and experimental conditions is, at present, still missing. The analysis of creep is typically carried out in terms of the so-called steady or secondary creep regime. The present work offers an alternative view of the creep behavior based on the Orowan dislocation dynamics. Our approach considers primary and secondary creep together as solid state isothermal transformations, similar to recrystallization or precipitation phenomena. In this frame, it is shown that the Johnson-Mehl-Avrami-Kolmogorov equation, typically used to analyze these transformations, can also be employed to explain creep deformation. The description is fully compatible with present (empirical) models of steady state creep. We used creep curves of commercially pure Al and ingot AA6061 alloy at different temperatures and stresses to validate the proposed model.

Fano resonance in anodic aluminum oxide based photonic crystals.

PubMed

Shang, Guo Liang; Fei, Guang Tao; Zhang, Yao; Yan, Peng; Xu, Shao Hui; Ouyang, Hao Miao; Zhang, Li De

2014-01-08

Anodic aluminum oxide based photonic crystals with periodic porous structure have been prepared using voltage compensation method. The as-prepared sample showed an ultra-narrow photonic bandgap. Asymmetric line-shape profiles of the photonic bandgaps have been observed, which is attributed to Fano resonance between the photonic bandgap state of photonic crystal and continuum scattering state of porous structure. And the exhibited Fano resonance shows more clearly when the sample is saturated ethanol gas than air-filled. Further theoretical analysis by transfer matrix method verified these results. These findings provide a better understanding on the nature of photonic bandgaps of photonic crystals made up of porous materials, in which the porous structures not only exist as layers of effective-refractive-index material providing Bragg scattering, but also provide a continuum light scattering state to interact with Bragg scattering state to show an asymmetric line-shape profile.

Thermodynamic investigation of the effect of alkali metal impuries on the processing of aluminum and magnesium alloys

NASA Astrophysics Data System (ADS)

Zhang, Shengjun

2006-12-01

Aluminum and magnesium alloys are widely used in the automobile and aerospace industries as structural materials due to their light weight, high specific strength and good formability. However, they suffer from the poor hot rolling characteristics due to undesired impurities like calcium, potassium, lithium and sodium. They increase the hydrogen solubility in the melt and promote the formation of porosity in aluminum castings. During fabrication of aluminum alloys, they cause the hot-shortness and embrittlement due to cracking. They also led to "blue haze" corrosion which promotes the discoloration of aluminum under humid condition. The removal of these elements increases overall melt loss of aluminum alloys when aluminum products are remelted and recast. Na is one of the common impurities in the Al and Mg alloys. In industry, primary Al is produced by the Hall-Heroult process, through the electrolysis of the mixture of molten alumina and cryolite (Al2O3+Na 3AlF6), the latter being added to lower the melting point. Therefore, Al inevitably contains some Na (>0.002%) without further treatment. The Na content in Al is influenced by the thermodynamics and kinetics of the electrolysis. Similarly, in the electrolytic production and subsequent processing of Mg, Mg is commonly in contact with molten salt mixtures of NaCl and MgCl 2. Consequently, 2--20 wt. ppm Na is often found in Mg alloys. Besides originating from the industrial production process, Na can be introduced in laboratory experiments from alumina crucibles by the reaction between the molten Al-Mg alloys and the Na2O impurity in the alumina crucible. The trace element K plays a similar role in Al alloys although it is seldom discussed. No systematic theoretic research has been carried out to investigate the behavior of these impurities during the processing of aluminum alloys. The thermodynamic description of the Al-Ca-K-Li-Mg-Na system is needed to understand the effects of Ca, K, Li and Na on phase stability of aluminum and magnesium alloys. As the first step of the thermodynamic description of the high-order system, the constitutive-binary systems were modeled in the present work using the CALPHAD technique combined with first-principles calculations. Then, ternaries and higher order systems can be modeled. For ternary systems without experimental data, the thermodynamic description is extrapolated by combining three constitutive-binary systems. Alkali-metal induced high temperature embrittlement (HTE) and loss of ductility were investigated in Al-Li, Al-Mg and Mg-Li alloys. It was discovered that the alkali-metal-rich liquid-2 phase is the cause of HTE and the loss of ductility is proportional to the mole fraction of the liquid phase and the grain size. The calculated results are consistent with experimental observations in the literature and were used to determine HTE safe and sensitive zones, maximum and critical hot-rolling temperatures and the maximum allowable Na content in alloys, which can be used to industrial processing of Al and Mg alloys. The degree of HTE is proportional to the mole fraction of the liquid-2 phase and the grain size.

Superhydrophilicity and antibacterial property of a Cu-dotted oxide coating surface

PubMed Central

2010-01-01

Background Aluminum-made settings are widely used in healthcare, schools, public facilities and transit systems. Frequently-touched surfaces of those settings are likely to harbour bacteria and be a potential source of infection. One method to utilize the effectiveness of copper (Cu) in eliminating pathogens for these surfaces would be to coat the aluminum (Al) items with a Cu coating. However, such a combination of Cu and Al metals is susceptible to galvanic corrosion because of their different electrochemical potentials. Methods In this work, a new approach was proposed in which electrolytic plasma oxidation (EPO) of Al was used to form an oxide surface layer followed by electroplating of Cu metal on the top of the oxide layer. The oxide was designed to function as a corrosion protective and biocompatible layer, and the Cu in the form of dots was utilized as an antibacterial material. The antibacterial property enhanced by superhydrophilicity of the Cu-dotted oxide coating was evaluated. Results A superhydrophilic surface was successfully prepared using electrolytic plasma oxidation of aluminum (Al) followed by electroplating of copper (Cu) in a Cu-dotted form. Both Cu plate and Cu-dotted oxide surfaces had excellent antimicrobial activities against E. coli ATCC 25922, methicillin-resistant Staphylococcus aureus (MRSA) ATCC 43300 and vancomycin-resistant Enterococcus faecium (VRE) ATCC 51299. However, its Cu-dotted surface morphology allowed the Cu-dotted oxide surface to be more antibacterial than the smooth Cu plate surface. The enhanced antibacterial property was attributed to the superhydrophilic behaviour of the Cu-dotted oxide surface that allowed the bacteria to have a more effective killing contact with Cu due to spreading of the bacterial suspension media. Conclusion The superhydrophilic Cu-dotted oxide coating surface provided an effective method of controlling bacterial growth and survival on contact surfaces and thus reduces the risk of infection and spread of bacteria-related diseases particularly in moist or wet environments. PMID:20843373

Composite material reinforced with atomized quasicrystalline particles and method of making same

DOEpatents

Biner, Suleyman B.; Sordelet, Daniel J.; Lograsso, Barbara K.; Anderson, Iver E.

1998-12-22

A composite material comprises an aluminum or aluminum alloy matrix having generally spherical, atomized quasicrystalline aluminum-transition metal alloy reinforcement particles disposed in the matrix to improve mechanical properties. A composite article can be made by consolidating generally spherical, atomized quaiscrystalline aluminum-transition metal alloy particles and aluminum or aluminum alloy particles to form a body that is cold and/or hot reduced to form composite products, such as composite plate or sheet, with interfacial bonding between the quasicrystalline particles and the aluminum or aluminum alloy matrix without damage (e.g. cracking or shape change) of the reinforcement particles. The cold and/or hot worked compositehibits substantially improved yield strength, tensile strength, Young's modulus (stiffness).

School Phobia: Understanding a Complex Behavioural Response

ERIC Educational Resources Information Center

Chitiyo, Morgan; Wheeler, John J.

2006-01-01

School phobia affects about 5% of the school-age population. If left untreated, school phobia can have devastating long-term consequences in children challenged by this condition. Various treatment approaches have been used to explore this complex behavioural response, major among them being the psychoanalytic, psychodynamic, pharmacological and…

40 CFR 464.10 - Applicability; description of the aluminum casting subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... aluminum casting subcategory. 464.10 Section 464.10 Protection of Environment ENVIRONMENTAL PROTECTION... Aluminum Casting Subcategory § 464.10 Applicability; description of the aluminum casting subcategory. The... introduction of pollutants into publicly owned treatment works resulting from aluminum casting operations as...

Method For Improving The Oxidation Resistance Of Metal Substrates Coated With Thermal Barrier Coatings

DOEpatents

Thompson, Anthony Mark; Gray, Dennis Michael; Jackson, Melvin Robert

2003-05-13

A method for providing a protective coating on a metal-based substrate is disclosed. The method involves the application of an aluminum-rich mixture to the substrate to form a discontinuous layer of aluminum-rich particles, followed by the application of a second coating over the discontinuous layer of aluminum-rich particles. Aluminum diffuses from the aluminum-rich layer into the substrate, and into any bond coat layer which is subsequently applied. Related articles are also described. A method for providing a protective coating on a metal-based substrate is disclosed. The method involves the application of an aluminum-rich mixture to the substrate to form a discontinuous layer of aluminum-rich particles, followed by the application of a second coating over the discontinuous layer of aluminum-rich particles. Aluminum diffuses from the aluminum-rich layer into the substrate, and into any bond coat layer which is subsequently applied. Related articles are also described.

Fabrication of Aluminum Foam-Filled Thin-Wall Steel Tube by Friction Welding and Its Compression Properties.

PubMed

Hangai, Yoshihiko; Saito, Masaki; Utsunomiya, Takao; Kitahara, Soichiro; Kuwazuru, Osamu; Yoshikawa, Nobuhiro

2014-09-19

Aluminum foam has received considerable attention in various fields and is expected to be used as an engineering material owing to its high energy absorption properties and light weight. To improve the mechanical properties of aluminum foam, combining it with dense tubes, such as aluminum foam-filled tubes, was considered necessary. In this study, an aluminum foam-filled steel tube, which consisted of ADC12 aluminum foam and a thin-wall steel tube, was successfully fabricated by friction welding. It was shown that a diffusion bonding layer with a thickness of approximately 10 μm was formed, indicating that strong bonding between the aluminum foam and the steel tube was realized. By the X-ray computed tomography observation of pore structures, the fabrication of an aluminum foam-filled tube with almost uniform pore structures over the entire specimen was confirmed. In addition, it was confirmed that the aluminum foam-filled steel tube exhibited mechanical properties superior to those of the ADC12 aluminum foam and steel tube. This is considered to be attributed to the combination of the aluminum foam and steel tube, which particularly prevents the brittle fracture and collapse of the ADC12 foam by the steel tube, along with the strong metal bonding between the aluminum foam and the steel tube.

Casting Protocols for the Production of Open Cell Aluminum Foams by the Replication Technique and the Effect on Porosity

PubMed Central

Elizondo Luna, Erardo M.; Barari, Farzad; Woolley, Robert; Goodall, Russell

2014-01-01

Metal foams are interesting materials from both a fundamental understanding and practical applications point of view. Uses have been proposed, and in many cases validated experimentally, for light weight or impact energy absorbing structures, as high surface area heat exchangers or electrodes, as implants to the body, and many more. Although great progress has been made in understanding their structure-properties relationships, the large number of different processing techniques, each producing material with different characteristics and structure, means that understanding of the individual effects of all aspects of structure is not complete. The replication process, where molten metal is infiltrated between grains of a removable preform material, allows a markedly high degree of control and has been used to good effect to elucidate some of these relationships. Nevertheless, the process has many steps that are dependent on individual “know-how”, and this paper aims to provide a detailed description of all stages of one embodiment of this processing method, using materials and equipment that would be relatively easy to set up in a research environment. The goal of this protocol and its variants is to produce metal foams in an effective and simple way, giving the possibility to tailor the outcome of the samples by modifying certain steps within the process. By following this, open cell aluminum foams with pore sizes of 1–2.36 mm diameter and 61% to 77% porosity can be obtained. PMID:25548938

Cellular and molecular basis of decision-making

PubMed Central

Yapici, Nilay; Zimmer, Manuel; Domingos, Ana I

2014-01-01

People think they are in control of their own decisions: what to eat or drink, whom to marry or pick a fight with, where to live, what to buy. Behavioural economists and neurophysiologists have long studied decision-making behaviours. However, these behaviours have only recently been studied through the light of molecular genetics. Here, we review recent research in mice, Drosophila melanogaster and Caenorhabditis elegans, that analyses the molecular and cellular mechanisms underlying decision-making. These studies interrogate decision-making about food, sexual behaviour, aggression or foraging strategies, and add molecular and cell biology understanding onto the consilience of brain and decision. PMID:25239948

Can at-risk young adolescents be popular and anti-social? Sociometric status groups, anti-social behaviour, gender and ethnic background.

PubMed

van de Schoot, Rens; van der Velden, Floor; Boom, Jan; Brugman, Daniël

2010-10-01

This study aimed to extend the understanding of anti-social behaviour and its association with popularity and sociometric status in a sample of at-risk adolescents from diverse ethnic backgrounds (n = 1491, average age 14.7 years). Both overt and covert types of anti-social behaviour were used to distinguish subgroups. These subgroups were created on the basis of anti-social behaviour profile scores, using Latent Class Analysis. Moderator effects of gender and ethnic background were investigated using a log-linear analysis. The main finding was that each sociometric status group consisted of subgroups that differed in terms of prevalence of self-reported anti-social behaviour. At-risk young adolescents who reported involvement in anti-social behaviour appeared in every status group, including the popular group. Implications for school prevention programmes for anti-social behaviour are discussed.

Health behaviour procrastination: a novel reasoned route towards self-regulatory failure.

PubMed

Kroese, Floor M; de Ridder, Denise T D

2016-09-01

In this paper, we highlight a novel perspective on health behaviour failure by considering reasoned procrastination as a contributing factor. We argue that the failure to enact intentions does not necessarily occur because people are victims of their strong impulses, but that people may also knowingly and wilfully postpone their intended actions. While procrastination is acknowledged as a factor associated with intention-behaviour gaps in other domains, it has surprisingly received only very little attention in the domain of health behaviour. We argue that it is particularly important to recognise the waxing and waning of intentions: rather than being truly abandoned, intentions may sometimes be temporarily put aside. This paper describes how the procrastination account relates to the intention-behaviour gap as we know it, what is known about procrastination and health behaviour, and what theoretical and practical implications can be derived from the addition of this novel perspective to our understanding of health behaviour change.

Reciprocal relationships between behaviour and parasites suggest that negative feedback may drive flexibility in male reproductive behaviour.

PubMed

Ezenwa, Vanessa O; Snider, Matthew H

2016-05-25

Parasites are ubiquitous components of the environment that contribute to behavioural and life-history variation among hosts. Although it is well known that host behaviour can affect parasite infection risk and that parasites can alter host behaviour, the potential for dynamic feedback between these processes is poorly characterized. Using Grant's gazelle (Nanger granti) as a model, we tested for reciprocal effects of behaviour on parasites and parasites on behaviour to understand whether behaviour-parasite feedback could play a role in maintaining variation in male reproductive behaviour. Adult male gazelles either defend territories to attract mates or reside in bachelor groups. Territoriality is highly variable both within- and between-individuals, suggesting that territory maintenance is costly. Using a combination of longitudinal and experimental studies, we found that individual males transition frequently between territorial and bachelor reproductive status, and that elevated parasite burdens are a cost of territoriality. Moreover, among territorial males, parasites suppress aspects of behaviour related to territory maintenance and defence. These results suggest that territorial behaviour promotes the accumulation of parasites in males, and these parasites dampen the very behaviours required for territory maintenance. Our findings suggest that reciprocal feedback between host behaviour and parasitism could be a mechanism maintaining variation in male reproductive behaviour in the system. © 2016 The Author(s).

Purifying Aluminum by Vacuum Distillation

NASA Technical Reports Server (NTRS)

Du Fresne, E. R.

1985-01-01

Proposed method for purifying aluminum employs one-step vacuum distillation. Raw material for process impure aluminum produced in electrolysis of aluminum ore. Impure metal melted in vacuum. Since aluminum has much higher vapor pressure than other constituents, boils off and condenses on nearby cold surfaces in proportions much greater than those of other constituents.

75 FR 1596 - Grant of Authority for Subzone Status, Reynolds Packaging LLC (Aluminum Foil Liner Stock...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

... Status, Reynolds Packaging LLC (Aluminum Foil Liner Stock), Louisville, Kentucky Pursuant to its...-purpose subzone at the aluminum foil liner stock manufacturing and distribution facilities of Reynolds... manufacturing and distribution of aluminum foil liner stock and aluminum foil at the facilities of Reynolds...

PREPARATION OF URANIUM-ALUMINUM ALLOYS

DOEpatents

Moore, R.H.

1962-09-01

A process is given for preparing uranium--aluminum alloys from a solution of uranium halide in an about equimolar molten alkali metal halide-- aluminum halide mixture and excess aluminum. The uranium halide is reduced and the uranium is alloyed with the excess aluminum. The alloy and salt are separated from each other. (AEC)

Photoemission study of tris(8-hydroxyquinoline) aluminum/aluminum oxide/tris(8-hydroxyquinoline) aluminum interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ding Huanjun; Zorba, Serkan; Gao Yongli

2006-12-01

The evolution of the interface electronic structure of a sandwich structure involving aluminum oxide and tris(8-hydroxyquinoline) aluminum (Alq), i.e. (Alq/AlO{sub x}/Alq), has been investigated with photoemission spectroscopy. Strong chemical reactions have been observed due to aluminum deposition onto the Alq substrate. The subsequent oxygen exposure releases some of the Alq molecules from the interaction with aluminum. Finally, the deposition of the top Alq layer leads to an asymmetry in the electronic energy level alignment with respect to the AlO{sub x} interlayer.

Silicon carbide sintered body manufactured from silicon carbide powder containing boron, silicon and carbonaceous additive

NASA Technical Reports Server (NTRS)

Tanaka, Hidehiko

1987-01-01

A silicon carbide powder of a 5-micron grain size is mixed with 0.15 to 0.60 wt% mixture of a boron compound, i.e., boric acid, boron carbide (B4C), silicon boride (SiB4 or SiB6), aluminum boride, etc., and an aluminum compound, i.e., aluminum, aluminum oxide, aluminum hydroxide, aluminum carbide, etc., or aluminum boride (AlB2) alone, in such a proportion that the boron/aluminum atomic ratio in the sintered body becomes 0.05 to 0.25 wt% and 0.05 to 0.40 wt%, respectively, together with a carbonaceous additive to supply enough carbon to convert oxygen accompanying raw materials and additives into carbon monoxide.

Metallic Thin-Film Bonding and Alloy Generation

NASA Technical Reports Server (NTRS)

Peotter, Brian S. (Inventor); Fryer, Jack Merrill (Inventor); Campbell, Geoff (Inventor); Droppers, Lloyd (Inventor)

2016-01-01

Diffusion bonding a stack of aluminum thin films is particularly challenging due to a stable aluminum oxide coating that rapidly forms on the aluminum thin films when they are exposed to atmosphere and the relatively low meting temperature of aluminum. By plating the individual aluminum thin films with a metal that does not rapidly form a stable oxide coating, the individual aluminum thin films may be readily diffusion bonded together using heat and pressure. The resulting diffusion bonded structure can be an alloy of choice through the use of a carefully selected base and plating metals. The aluminum thin films may also be etched with distinct patterns that form a microfluidic fluid flow path through the stack of aluminum thin films when diffusion bonded together.

Composite material reinforced with atomized quasicrystalline particles and method of making same

DOEpatents

Biner, S.B.; Sordelet, D.J.; Lograsso, B.K.; Anderson, I.E.

1998-12-22

A composite material comprises an aluminum or aluminum alloy matrix having generally spherical, atomized quasicrystalline aluminum-transition metal alloy reinforcement particles disposed in the matrix to improve mechanical properties. A composite article can be made by consolidating generally spherical, atomized quasicrystalline aluminum-transition metal alloy particles and aluminum or aluminum alloy particles to form a body that is cold and/or hot reduced to form composite products, such as composite plate or sheet, with interfacial bonding between the quasicrystalline particles and the aluminum or aluminum alloy matrix without damage (e.g. cracking or shape change) of the reinforcement particles. The cold and/or hot worked composite exhibits substantially improved yield strength, tensile strength, Young`s modulus (stiffness). 3 figs.

The Identification of Aluminum in Human Brain Tissue Using Lumogallion and Fluorescence Microscopy

PubMed Central

Mirza, Ambreen; King, Andrew; Troakes, Claire; Exley, Christopher

2016-01-01

Aluminum in human brain tissue is implicated in the etiologies of neurodegenerative diseases including Alzheimer’s disease. While methods for the accurate and precise measurement of aluminum in human brain tissue are widely acknowledged, the same cannot be said for the visualization of aluminum. Herein we have used transversely-heated graphite furnace atomic absorption spectrometry to measure aluminum in the brain of a donor with Alzheimer’s disease, and we have developed and validated fluorescence microscopy and the fluor lumogallion to show the presence of aluminum in the same tissue. Aluminum is observed as characteristic orange fluorescence that is neither reproduced by other metals nor explained by autofluorescence. This new and relatively simple method to visualize aluminum in human brain tissue should enable more rigorous testing of the aluminum hypothesis of Alzheimer’s disease (and other neurological conditions) in the future. PMID:27472886

Dissolution and Separation of Aluminum and Aluminosilicates

DOE PAGES

McFarlane, Joanna; Benker, Dennis; DePaoli, David W.; ...

2015-12-19

The selection of an aluminum alloy for target irradiation affects post-irradiation target dissolution and separations. Recent tests with aluminum alloy 6061 yielded greater than expected precipitation in the dissolver, forming up to 10 wt.% solids of aluminum hydroxides and aluminosilicates. Aluminosilicate dissolution presents challenges in a number of different areas, metals extraction from minerals, flyash treatment, and separations from aluminum alloys. We present experimental work that attempts to maximize dissolution of aluminum metal, along with silicon, magnesium, and copper impurities, through control of temperature, the rate of reagent addition, and incubation time. Aluminum phase transformations have been identified as amore » function of time and temperature, using X-ray diffraction. Solutions have been analyzed using wet chemical methods and X-ray fluorescence. Our data have been compared with published calculations of aluminum phase diagrams. Approaches are given to enhance the dissolution of aluminum and aluminosilicate phases in caustic solution.« less

Teachers' Perceptions of Classroom Behaviour and Working Memory

ERIC Educational Resources Information Center

Alloway, Tracy Packiam

2012-01-01

Working memory, ability to remember and manipulate information, is crucial to academic attainment. The aim of the present study was to understand teachers' perception of working memory and how it impacts classroom behaviour. A semi-structured interview was used to explore teachers' ability to define working memory, identify these difficulties in…

Brief Report: Emotional Intelligence, Victimisation and Bullying in Adolescents

ERIC Educational Resources Information Center

Lomas, Justine; Stough, Con; Hansen, Karen; Downey, Luke A.

2012-01-01

In order to better understand bullying behaviours we examined for the first time the relationship between emotional intelligence (EI) of adolescents, bullying behaviours and peer victimisation. The sample consisted of 68 adolescents from a secondary college. Participants completed a self-report questionnaire which assessed their EI, how frequently…

Behaviour Problems in Institutionalised People with Intellectual Disability and Schizophrenia Spectrum Disorders

ERIC Educational Resources Information Center

Thorson, Ryan T.; Matson, Johnny L.; Rojahn, Johannes; Dixon, Dennis R.

2008-01-01

Background: Although our understanding of dual diagnosis has improved, a deficit still exists in our knowledge of how schizophrenia spectrum disorders (SSD) manifest themselves in individuals with intellectual disability (ID). In addition, little is known about the relationship between behaviour problems and psychopathology in this population.…

Infants' Social-Emotional Adjustment within a Childcare Context of Korea

ERIC Educational Resources Information Center

Kim, Min-Hee; Moon, Hyukjun

2011-01-01

In a child day-care setting, the naturally occurring social-emotional behaviours and play interaction of 51 infants were observed and recorded. Individual differences in gender, age, temperament, and maternal parenting behaviours were examined to understand how these variables might be related to social-emotional adjustment of infants. The…

The Impact of School Suspensions: A Student Wellbeing Issue

ERIC Educational Resources Information Center

Hemphill, Sheryl; Hargreaves, John

2009-01-01

School suspensions are commonly used in schools to address challenging student behaviours, often on the understanding that suspensions send a clear message to the school community about what is acceptable behaviour. However, there is a growing body of evidence that school suspensions have a range of unintended negative consequences including…

Three-dimensional tracking of small aquatic organisms using fluorescent nanoparticles.

PubMed

Ekvall, Mikael T; Bianco, Giuseppe; Linse, Sara; Linke, Heiner; Bäckman, Johan; Hansson, Lars-Anders

2013-01-01

Tracking techniques are vital for the understanding of the biology and ecology of organisms. While such techniques have provided important information on the movement and migration of large animals, such as mammals and birds, scientific advances in understanding the individual behaviour and interactions of small (mm-scale) organisms have been hampered by constraints, such as the sizes of existing tracking devices, in existing tracking methods. By combining biology, chemistry and physics we here present a method that allows three-dimensional (3D) tracking of individual mm-sized aquatic organisms. The method is based on in-vivo labelling of the organisms with fluorescent nanoparticles, so-called quantum dots, and tracking of the organisms in 3D via the quantum-dot fluorescence using a synchronized multiple camera system. It allows for the efficient and simultaneous study of the behaviour of one as well as multiple individuals in large volumes of observation, thus enabling the study of behavioural interactions at the community scale. The method is non-perturbing - we demonstrate that the labelling is not affecting the behavioural response of the organisms - and is applicable over a wide range of taxa, including cladocerans as well as insects, suggesting that our methodological concept opens up for new research fields on individual behaviour of small animals. Hence, this offers opportunities to focus on important biological, ecological and behavioural questions never before possible to address.

Deciphering the behaviour manipulation imposed by a virus on its parasitoid host: insights from a dual transcriptomic approach.

PubMed

Varaldi, J; Lepetit, D

2018-05-28

Behaviour manipulation imposed by parasites is a fascinating phenomenon but our understanding is still very limited. We studied the interaction between a virus and the parasitic wasp Leptopilina boulardi that attacks Drosophila larvae. Wasps usually refrain to lay eggs into already parasitized hosts (superparasitism avoidance). On the contrary, females infected by the Leptopilina boulardi Filamentous Virus (LbFV) are much more incline to superparasitize. Interestingly, the host-sharing induced by this behaviour modification leads to the horizontal transmission of the virus, thus increasing its fitness at the expense of that of the wasp. To better understand the mechanisms underlying this behaviour manipulation, we studied by RNA sequencing the meta-transcriptome of LbFV and the parasitic wasp both in the abdomen and in the head. We found that the abundance of viral transcripts was independent of the wasp strain but strongly differed between tissues. Based on the tissue pattern of expression, we identified a set of 20 viral genes putatively involved in the manipulation process. In addition, we identified a set of wasp genes deregulated in the presence of the virus either in the abdomen or in the head, including genes with annotations suggesting involvement in behaviour (i.e. Potassium-channel protein). This dataset gives new insights into the behaviour manipulation and on the genetic basis of superparasitism in parasitoids.

Experiment and modeling: Ignition of aluminum particles with a carbon dioxide laser

NASA Astrophysics Data System (ADS)

Mohan, Salil

Aluminum is a promising ingredient for high energy density compositions used in propulsion systems, explosives, and pyrotechnics. Aluminum powder fuel additives enable one to achieve higher combustion enthalpies and reaction temperatures. Therefore, to develop aluminum based novel and customized high density energetic materials, understanding of ignition and combustion kinetics of aluminum powders is required. In most practical systems, metal ignition and combustion occur in environments with rapidly changing temperatures and gas compositions. The kinetics of exothermic reactions in related energetic materials is commonly characterized by thermal analysis, where the heating rates are very low, on the order of 1--50 K/min. The extrapolation of the identified kinetics to the high heating rates is difficult and requires direct experimental verification. This difficulty led to development of new experimental approaches to directly characterize ignition kinetics for the heating rates in the range of 103--104 K/s. However, the practically interesting heating rates of 106 K/s range have not been achieved. This work is directed at development of an experimental technique and respective heat transfer model for studying ignition of aluminum and other micron-sized metallic particles at heating rates varied around 106 K/s. The experimental setup uses a focused CO2 laser as a heating source and a plate capacitor aerosolizer to feed the aluminum particles into the laser beam. The setup allows using different environment for particle aerosolization. The velocities of particles in the jet are in the range of 0.1 --0 3 m/s. For each selected jet velocity, the laser power is increased until the particles are observed to ignite. The ignition is detected optically using a digital camera and a photomultiplier. The ignition thresholds for spherical aluminum powder were measured at three different particle jet velocities, in air environment. A single particle heat transfer model was developed to describe the experiments. Experiments with different jet velocities in air environment were performed to validate the model. The interaction of the laser beam with particles is particle size dependent and a narrow range of particle sizes (around 3.4 microm) is heated most effectively. Therefore, the heat transfer model needs to be analyzed only for the particles with this specific size, which greatly simplifies the interpretation of experiments. Describing heating of a micron sized metal particle involves the transition regime heat transfer. A modified Fuchs model was used to describe the heat transfer in this study. In addition to dry air environment, the experimental technique was also used with other oxidizing environments, including O2, H2O, CO2 and mixtures thereof. It was observed that particle size capable of maintaining a vapor phase flame is a function of the environment. Arrhenius model kinetics parameters for Al ignition in O2, CO2 and H2O environments were determined.

Micro-mechanisms of Surface Defects Induced on Aluminum Alloys during Plastic Deformation at Elevated Temperatures

NASA Astrophysics Data System (ADS)

Gali, Olufisayo A.

Near-surface deformed layers developed on aluminum alloys significantly influence the corrosion and tribological behavior as well as reduce the surface quality of the rolled aluminum. The evolution of the near-surface microstructures induced on magnesium containing aluminum alloys during thermomechanical processing has been investigated with the aim generating an understanding of the influence of individual forming parameters on its evolution and examine the microstructure of the roll coating induced on the mating steel roll through material transfer during rolling. The micro-mechanisms related to the various features of near-surface microstructure developed during tribological conditions of the simulated hot rolling process were identified. Thermomechanical processing experiments were performed with the aid of hot rolling (operating temperature: 550 to 460 °C, 4, 10 and 20 rolling pass schedules) and hot forming (operating temperature: 350 to 545 °C, strain rate: 4 x 10-2 s-1) tribo-simulators. The surface, near-surface features and material transfer induced during the elevated temperature plastic deformation were examined and characterized employing optical interferometry, SEM/EDS, FIB and TEM. Near-surface features characterized on the rolled aluminum alloys included; cracks, fractured intermetallic particles, aluminum nano-particles, oxide decorated grain boundaries, rolled-in oxides, shingles and blisters. These features were related to various individual rolling parameters which included, the work roll roughness, which induced the formation of shingles, rolling marks and were responsible for the redistribution of surface oxide and the enhancements of the depth of the near-surface damage. The enhanced stresses and strains experienced during rolling were related to the formation and propagation of cracks, the nanocrystalline structure of the near-surface layers and aluminum nano-particles. The mechanism of the evolution of the near-surface microstructure were determined to include grain boundary sliding which induced the cracks at the surface and subsurface of the alloy, magnesium diffusion to free surfaces, crack propagation from shear stresses and the shear strains inducing the nanocrystalline grain structure, the formation of shingles by the shear deformation of micro-wedges induced by the work roll grooves, and the deformation of this oxide covered micro-wedges inducing the rolled-in oxides. Magnesium diffusion to free surfaces was identified as inducing crack healing due to the formation of MgO within cracks and was responsible for the oxide decorated grain boundaries. An examination of the roll coating revealed a complex layered microstructure that was induced through tribo-chemical and mechanical entrapment mechanisms. The microstructure of the roll coating suggested that the work roll material and the rolled aluminum alloy were essential in determining its composition and structure. Subsequent hot forming processes revealed the rich oxide-layer of the near-surface microstructure was beneficial for reducing the coefficient of friction during tribological contact with the steel die. Damage to the microstructure include cracks induced from grain boundary sliding of near-surface grains and the formation of oxide fibres within cracks of the near-surface deformed layers.

Molecular regulation of aluminum resistance and sulfur nutrition during root growth.

PubMed

Alarcón-Poblete, Edith; Inostroza-Blancheteau, Claudio; Alberdi, Miren; Rengel, Zed; Reyes-Díaz, Marjorie

2018-01-01

Aluminum toxicity and sulfate deprivation both regulate microRNA395 expression, repressing its low-affinity sulfate transporter ( SULTR2;1 ) target. Sulfate deprivation also induces the high-affinity sulfate transporter gene ( SULTR12 ), allowing enhanced sulfate uptake. Few studies about the relationships between sulfate, a plant nutrient, and aluminum, a toxic ion, are available; hence, the molecular and physiological processes underpinning this interaction are poorly understood. The Al-sulfate interaction occurs in acidic soils, whereby relatively high concentrations of trivalent toxic aluminum (Al 3+ ) may hamper root growth, limiting uptake of nutrients, including sulfur (S). On the other side, Al 3+ may be detoxified by complexation with sulfate in the acid soil solution as well as in the root-cell vacuoles. In this review, we focus on recent insights into the mechanisms governing plant responses to Al toxicity and its relationship with sulfur nutrition, emphasizing the role of phytohormones, microRNAs, and ion transporters in higher plants. It is known that Al 3+ disturbs gene expression and enzymes involved in biosynthesis of S-containing cysteine in root cells. On the other hand, Al 3+ may induce ethylene biosynthesis, enhance reactive oxygen species production, alter phytohormone transport, trigger root growth inhibition and promote sulfate uptake under S deficiency. MicroRNA395, regulated by both Al toxicity and sulfate deprivation, represses its low-affinity Sulfate Transporter 2;1 (SULTR2;1) target. In addition, sulfate deprivation induces High Affinity Sulfate Transporters (HAST; SULTR1;2), improving sulfate uptake from low-sulfate soil solutions. Identification of new microRNAs and cloning of their target genes are necessary for a better understanding of the role of molecular regulation of plant resistance to Al stress and sulfate deprivation.

Structural and Immunological Analysis of Anthrax Recombinant Protective Antigen Adsorbed to Aluminum Hydroxide Adjuvant

PubMed Central

Wagner, Leslie; Verma, Anita; Meade, Bruce D.; Reiter, Karine; Narum, David L.; Brady, Rebecca A.; Little, Stephen F.

2012-01-01

New anthrax vaccines currently under development are based on recombinant protective antigen (rPA) and formulated with aluminum adjuvant. Because long-term stability is a desired characteristic of these vaccines, an understanding of the effects of adsorption to aluminum adjuvants on the structure of rPA is important. Using both biophysical and immunological techniques, we compared the structure and immunogenicity of freshly prepared rPA-Alhydrogel formulations to that of formulations stored for 3 weeks at either room temperature or 37°C in order to assess the changes in rPA structure that might occur upon long-term storage on aluminum adjuvant. Intrinsic fluorescence emission spectra of tryptophan residues indicated that some tertiary structure alterations of rPA occurred during storage on Alhydrogel. Using anti-PA monoclonal antibodies to probe specific regions of the adsorbed rPA molecule, we found that two monoclonal antibodies that recognize epitopes located in domain 1 of PA exhibited greater reactivity to the stored formulations than to freshly prepared formulations. Immunogenicity of rPA-Alhydrogel formulations in mice was assessed by measuring the induction of toxin-neutralizing antibodies, as well as antibodies reactive to 12-mer peptides spanning the length of PA. Mice immunized with freshly prepared formulations developed significantly higher toxin-neutralizing antibody titers than mice immunized with the stored preparations. In contrast, sera from mice immunized with stored preparations exhibited increased reactivity to nine 12-mer peptides corresponding to sequences located throughout the rPA molecule. These results demonstrate that storage of rPA-Alhydrogel formulations can lead to structural alteration of the protein and loss of the ability to elicit toxin-neutralizing antibodies. PMID:22815152

Aluminum-based one- and two-dimensional micro fin array structures: high-throughput fabrication and heat transfer testing

NASA Astrophysics Data System (ADS)

Primeaux, Philip A.; Zhang, Bin; Zhang, Xiaoman; Miller, Jacob; Meng, W. J.; KC, Pratik; Moore, Arden L.

2017-02-01

Microscale fin array structures were replicated onto surfaces of aluminum 1100 and aluminum 6061 alloy (Al1100/Al6061) sheet metals through room-temperature instrumented roll molding. Aluminum-based micro fin arrays were replicated at room temperature, and the fabrication process is one with high throughput and low cost. One-dimensional (1D) micro fin arrays were made through one-pass rolling, while two-dimensional (2D) micro fin arrays were made by sequential 90° cross rolling with the same roller sleeve. For roll molding of 1D micro fins, fin heights greater than 600 µm were achieved and were shown to be proportional to the normal load force per feature width. At a given normal load force, the fin height was further shown to scale inversely with the hardness of the sheet metal. For sequential 90° cross rolling, morphologies of roll molded 2D micro fin arrays were examined, which provided clues to understand how plastic deformation occurred under cross rolling conditions. A series of pool boiling experiments on low profile Al micro fin array structures were performed within Novec 7100, a widely used commercial dielectric coolant. Results for both horizontal and vertical surface orientations show that roll molded Al micro fin arrays can increase heat flux at fixed surface temperature as compared to un-patterned Al sheet. The present results further suggest that many factors beyond just increased surface area can influence heat transfer performance, including surface finish and the important multiphase transport mechanisms in and around the fin geometry. These factors must also be considered when designing and optimizing micro fin array structures for heat transfer applications.

Evaluation of Dowfrost(TM) HD as a Thermal Control Fluid for Constellation Vehicles

NASA Technical Reports Server (NTRS)

Lee, Steve

2009-01-01

A test was conducted from November 2008 to January 2009 to help determine the compatibility of an inhibited propylene glycol/water solution with planned Constellation vehicles. Dowfrost(TradeMark) HD was selected as the baseline for Orion, as well as other Constellation systems. Therefore, the same Dowfrost(TradeMark) HD/Water solution planned for Orion was chosen for this test. The fluid was subjected to a thermal fluid loop that had flightlike properties, as compared to Orion. The fluid loop had similar wetted materials, temperatures, flow rates, and aluminum wetted surface area to fluid volume ratio. The test was designed to last for 10 years, the life expectancy of the lunar habitat. However, the test lasted less than two months. System filters became clogged with precipitate, rendering the fluid system inoperable. Upon examination of the precipitate, it was determined that the precipitate composition contained aluminum, which could have only come from materials in the test stand, as aluminum is not part of the Dowfrost(TradeMark HD composition. Also, the fluid pH was determined to have increased from 10.1, at the first test sample, to 12.2, at the completion of the test. This high of a pH is corrosive to aluminum and was certainly a contributing factor to the development of precipitate. Chemical analyses and bench-top tests are currently ongoing to determine the underlying cause for this rapid degradation of the fluid. Hamilton Sundstrand, the contractor developing the Orion thermal fluid loop, is performing a parallel effort to not only understand the cause of fluid degradation in the test, but also to investigate solutions to avoid this problem in the Orion s thermal control system. JSC also consulted with the Hamilton Sundstrand team in the development of this test and the subsequent analysis.

A Comparison of Gallium and Indium Alkoxide Complexes as Catalysts for Ring-Opening Polymerization of Lactide.

PubMed

Kremer, Alexandre B; Andrews, Ryan J; Milner, Matthew J; Zhang, Xu R; Ebrahimi, Tannaz; Patrick, Brian O; Diaconescu, Paula L; Mehrkhodavandi, Parisa

2017-02-06

The impact of the metal size and Lewis acidity on the polymerization activity of group 13 metal complexes was studied, and it was shown that, within the same ligand family, indium complexes are far more reactive and selective than their gallium analogues. To this end, gallium and aluminum complexes supported by a tridentate diaminophenolate ligand, as well as gallium complexes supported by N,N'-ethylenebis(salicylimine)(salen) ligands, were synthesized and compared to their indium analogues. Using the tridentate ligand set, it was possible to isolate the gallium chloride complexes 3 and (±)-4 and the aluminum analogues 5 and (±)-6. The alkoxygallium complex (±)-2, supported by a salen ligand, was also prepared and characterized and, along with the three-component system GaCl 3 /BnOH/NEt 3 , was tested for the ring-opening polymerization of lactide and ε-caprolactone. The polymerization rates and selectivities of both systems were significantly lower than those for the indium analogues. The reaction of (±)-2 with 1 equiv of lactide forms the first insertion product, which is stable in solution and can be characterized at room temperature. In order to understand the differences of the reactivity within the group 13 metal complexes, a Lewis acidity study using triethylphosphine oxide (the Gutmann-Beckett method) was undertaken for a series of aluminum, gallium, and indium halide complexes; this study shows that indium halide complexes are less Lewis acidic than their aluminum and gallium analogues. Density functional theory calculations show that the Mulliken charges for the indium complexes are higher than those for the gallium analogues. These data suggest that the impact of ligands on the reactivity is more significant than that of the metal Lewis acidity.

Combining 27Al Solid-State NMR and First-Principles Simulations To Explore Crystal Structure in Disordered Aluminum Oxynitride.

PubMed

Tu, Bingtian; Liu, Xin; Wang, Hao; Wang, Weimin; Zhai, Pengcheng; Fu, Zhengyi

2016-12-19

The nuclear magnetic resonance (NMR) technique gives insight into the local information in a crystal structure, while Rietveld refinement of powder X-ray diffraction (PXRD) sketches out the framework of a crystal lattice. In this work, first-principles calculations were combined with the solid-state NMR technique and Rietveld refinement to explore the crystal structure of a disordered aluminum oxynitride (γ-alon). The theoretical NMR parameters (chemical shift, δ iso , quadrupolar coupling constants, C Q , and asymmetry parameter, η) of Al 22.5 O 28.5 N 3.5 , predicted by the gauge-including projector augmented wave (GIPAW) algorithm, were used to facilitate the analytical investigation of the 27 Al magic-angle spinning (MAS) NMR spectra of the as-prepared sample, whose formula was confirmed to be Al 2.811 O 3.565 N 0.435 by quantitative analysis. The experimental δ iso , C Q , and η of 27 Al showed a small discrepancy compared with theoretical models. The ratio of aluminum located at the 8a to 16d sites was calculated to be 0.531 from the relative integration of peaks in the 27 Al NMR spectra. The occupancies of aluminum at the 8a and 16d positions were determined through NMR investigations to be 0.9755 and 0.9178, respectively, and were used in the Rietveld refinement to obtain the lattice parameter and anion parameter of Al 2.811 O 3.565 N 0.435 . The results from 27 Al NMR investigations and PXRD structural refinement complemented each other. This work provides a powerful and accessible strategy to precisely understand the crystal structure of novel oxynitride materials with multiple disorder.

Astringent compounds suppress taste responses in gerbil.

PubMed

Schiffman, S S; Suggs, M S; Simon, S A

1992-11-06

Astringent tastes are generally considered those that induce long-lasting puckering and drying sensations on the tongue and membranes of the oral cavity. Electrophysiological recordings were made here from the whole chorda tympani nerve in gerbil to understand the interactive effect of astringent-tasting molecules with a broad spectrum of tastants including mono- and divalent salts, bitter compounds, acids, and sweeteners. The astringent tasting compounds were tannic acid (24 mM at pH's 2.9 and 5.5), aluminum ammonium sulfate (30 mM), aluminum potassium sulfate (10 mM) and gallic acid (30 mM). Hydrochloric acid (1 mM, pH 2.9) was also tested to control for acidity, since aqueous solutions of astringent-tasting compounds are acidic. Adaptation of the tongue to tannic acid (24 mM) at both pH 2.9 and 5.5 markedly inhibited responses elicited by salts, acids, sweeteners, and bitter-tasting compounds. The degree of the inhibition at these two pH values is about the same which suggests that tannic acid itself (as opposed to acidity) may produce this inhibition. Chorda tympani responses to sweeteners were completely suppressed by tannic acid; responses to KCl, NH4Cl, and urea were the least suppressed. The aluminum salts also inhibited the chorda tympani responses to all stimuli tested. Gallic acid, which is weakly astringent, had minimal effects on the chorda tympani responses to the test compounds. These data suggest that both tannic acid and the aluminum salts inhibit a variety of transport pathways and receptors in taste cells for a broad spectrum of tastants. The inhibition of some of these pathways may contribute to the astringent taste sensation.

Effects of aluminum and extremely low frequency electromagnetic radiation on oxidative stress and memory in brain of mice.

PubMed

Deng, Yuanxin; Zhang, Yanwen; Jia, Shujie; Liu, Junkang; Liu, Yanxia; Xu, Weiwei; Liu, Lei

2013-12-01

This study was aimed to investigate the effect of aluminum and extremely low-frequency magnetic fields (ELF-MF) on oxidative stress and memory of SPF Kunming mice. Sixty male SPF Kunming mice were divided randomly into four groups: control group, ELF-MF group (2 mT, 4 h/day), load aluminum group (200 mg aluminum/kg, 0.1 ml/10 g), and ELF-MF + aluminum group (2 mT, 4 h/day, 200 mg aluminum/kg). After 8 weeks of treatment, the mice of three experiment groups (ELF-MF group, load aluminum group, and ELF-MF + aluminum group) exhibited firstly the learning memory impairment, appearing that the escaping latency to the platform was prolonged and percentage in the platform quadrant was reduced in the Morris water maze (MWM) task. Secondly are the pathologic abnormalities including neuronal cell loss and overexpression of phosphorylated tau protein in the hippocampus and cerebral cortex. On the other hand, the markers of oxidative stress were determined in mice brain and serum. The results showed a statistically significant decrease in superoxide dismutase activity and increase in the levels of malondialdehyde in the ELF-MF group (P < 0.05 or P < 0.01), load aluminum group (P < 0.01), and ELF-MF + aluminum group (P < 0.01). However, the treatment with ELF-MF + aluminum induced no more damage than ELF-MF and aluminum did, respectively. In conclusion, both aluminum and ELF-MF could impact on learning memory and pro-oxidative function in Kunming mice. However, there was no evidence of any association between ELF-MF exposure with aluminum loading.

High-energy electron-induced damage production at room temperature in aluminum-doped silicon

NASA Technical Reports Server (NTRS)

Corbett, J. W.; Cheng, L. J.; Jaworowski, A.; Karins, J. P.; Lee, Y. H.; Lindstroem, L.; Mooney, P. M.; Oehrlen, G.; Wang, K. L.

1979-01-01

DLTS and EPR measurements are reported on aluminum-doped silicon that was irradiated at room temperature with high-energy electrons. Comparisons are made to comparable experiments on boron-doped silicon. Many of the same defects observed in boron-doped silicon are also observed in aluminum-doped silicon, but several others were not observed, including the aluminum interstitial and aluminum-associated defects. Damage production modeling, including the dependence on aluminum concentration, is presented.

Louisiana SIP: LAC 33:III Ch 23 Subchap B, §2303--Aluminum Plants, §2303 Standards for Horizontal Stud Soderberg Primary Aluminum Plants and Prebake Primary Aluminum Plants; SIP effective 1989-05-08 (LAc49) to 2011-08-03 (LAad34 - Revised)

EPA Pesticide Factsheets

Louisiana SIP: LAC 33:III Ch 23 Subchap B, §2303--Aluminum Plants, §2303 Standards for Horizontal Stud Soderberg Primary Aluminum Plants and Prebake Primary Aluminum Plants; SIP effective 1989-05-08 (LAc49) to 2011-08-03 (LAad34 - Revised)

Control of Defects in Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates

DTIC Science & Technology

2013-02-01

Nord, J.; Albe, K.; Erhart, P.; Nordlund, K. Modelling of Compound Semiconductors: Analytical Bond-order Potential for Gallium , Nitrogen and Gallium ...Control of Defects in Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates by Iskander G. Batyrev, Chi-Chin Wu...Aluminum Gallium Nitride ((Al)GaN) Films on Grown Aluminum Nitride (AlN) Substrates Iskander G. Batyrev and N. Scott Weingarten Weapons and

Making sense of syphilis: beliefs, behaviours and disclosure among gay men recently diagnosed with infectious syphilis and the implications for prevention.

PubMed

Lambert, Natalie L; Imrie, John; Fisher, Martin J; Phillips, Alan; Watson, Rod; Dean, Gill

2006-09-01

The resurgence of syphilis in men who have sex with men (MSM) has proved remarkably resilient in the face of innovative control and prevention interventions. Understanding the determinants of the current outbreaks has been restricted by the available data. Qualitative work is needed to understand individual and community experiences of syphilis and to help guide new prevention and control efforts. An exploratory study using semi-structured interviews with a convenience sample of MSM (n = 15), recently diagnosed with infectious syphilis, attending sexual health and HIV-outpatient services in Brighton, England. Analysis focussed on men's beliefs about syphilis, their experience of testing and being given a syphilis diagnosis, mediators of 'risky' sexual behaviour and disclosure to social and sexual contacts. Two beliefs--'syphilis is rare' and 'syphilis is dirty'--dominated respondents' accounts. These beliefs coloured every aspect of respondents' clinical and social experience of syphilis, and impeded disclosure and partner notification. They also contributed to misconceptions about behaviours with increased syphilis transmission risk, the mechanics of disease acquisition, health-seeking behaviours and risk-reduction strategies. The apparent failure of syphilis control measures so far may be due to our limited understanding of MSM's views and experience of STIs other than HIV Syphilis prevention needs to tackle MSM's widely held beliefs about sexual communication, risk behaviour and other STIs. The most useful health education interventions are likely to be those that build on MSM's significant knowledge base and address both the current syphilis crisis and wider sexual health promotion goals.

Symposium on understanding and influencing consumer food behaviours for health: executive summary report.

PubMed

Amarra, Ma Sofia V; Yee, Yeong Boon; Drewnowski, Adam

2008-01-01

Food consumption patterns in Asia are rapidly changing. Urbanization and changing lifestyles have diminished the consumption of traditional meals based on cereals, vegetables and root crops. These changes are accompa-nied by an increasing prevalence of chronic diseases among Asian populations. ILSI Southeast Asia and CSIRO, Australia jointly organized the Symposium on Understanding and Influencing Food Behaviours for Health, focusing on the use of consumer science to improve food behaviour. The goals of the Symposium were to present an understanding of Asian consumers and their food choices, examine the use of consumer research to modify food choices towards better health, illustrate how health programs and food regulations can be utilized effectively to promote healthier choices, and identify knowledge gaps regarding the promotion of healthy food behaviour in Asian populations. There is no difference in taste perception among Asians, and Asian preference for certain tastes is determined by exposure and familiarity largely dictated by culture and its underlying values and beliefs. Cross-cultural validity of consumer science theories and tools derived from western populations need to be tested in Asia. Information on consumption levels and substitution behaviours for foods and food products, obtained using consumer research methods, can guide the development of food regulations and programs that will enable individuals to make healthier choices. Existing knowledge gaps include consumer research techniques appropriate for use in Asian settings, diet-health relationships from consumption of traditional Asian diets, and methods to address the increasing prevalence of over- and undernutrition within the same households in Asia.

Fabrication of Aluminum Foam-Filled Thin-Wall Steel Tube by Friction Welding and Its Compression Properties

PubMed Central

Hangai, Yoshihiko; Saito, Masaki; Utsunomiya, Takao; Kitahara, Soichiro; Kuwazuru, Osamu; Yoshikawa, Nobuhiro

2014-01-01

Aluminum foam has received considerable attention in various fields and is expected to be used as an engineering material owing to its high energy absorption properties and light weight. To improve the mechanical properties of aluminum foam, combining it with dense tubes, such as aluminum foam-filled tubes, was considered necessary. In this study, an aluminum foam-filled steel tube, which consisted of ADC12 aluminum foam and a thin-wall steel tube, was successfully fabricated by friction welding. It was shown that a diffusion bonding layer with a thickness of approximately 10 μm was formed, indicating that strong bonding between the aluminum foam and the steel tube was realized. By the X-ray computed tomography observation of pore structures, the fabrication of an aluminum foam-filled tube with almost uniform pore structures over the entire specimen was confirmed. In addition, it was confirmed that the aluminum foam-filled steel tube exhibited mechanical properties superior to those of the ADC12 aluminum foam and steel tube. This is considered to be attributed to the combination of the aluminum foam and steel tube, which particularly prevents the brittle fracture and collapse of the ADC12 foam by the steel tube, along with the strong metal bonding between the aluminum foam and the steel tube. PMID:28788213

Predictive ethoinformatics reveals the complex migratory behaviour of a pelagic seabird, the Manx Shearwater

PubMed Central

Freeman, Robin; Dean, Ben; Kirk, Holly; Leonard, Kerry; Phillips, Richard A.; Perrins, Chris M.; Guilford, Tim

2013-01-01

Understanding the behaviour of animals in the wild is fundamental to conservation efforts. Advances in bio-logging technologies have offered insights into the behaviour of animals during foraging, migration and social interaction. However, broader application of these systems has been limited by device mass, cost and longevity. Here, we use information from multiple logger types to predict individual behaviour in a highly pelagic, migratory seabird, the Manx Shearwater (Puffinus puffinus). Using behavioural states resolved from GPS tracking of foraging during the breeding season, we demonstrate that individual behaviours can be accurately predicted during multi-year migrations from low cost, lightweight, salt-water immersion devices. This reveals a complex pattern of migratory stopovers: some involving high proportions of foraging, and others of rest behaviour. We use this technique to examine three consecutive years of global migrations, revealing the prominence of foraging behaviour during migration and the importance of highly productive waters during migratory stopover. PMID:23635496

The Drosophila small GTPase Rac2 is required for normal feeding and mating behaviour.

PubMed

Goergen, Philip; Kasagiannis, Anna; Schiöth, Helgi B; Williams, Michael J

2014-03-01

All multicellular organisms require the ability to regulate bodily processes in order to maintain a stable condition, which necessitates fluctuations in internal metabolics, as well as modifications of outward behaviour. Understanding the genetics behind this modulation is important as a general model for the metabolic modification of behaviour. This study demonstrates that the activity of the small GTPase Rac2 is required in Drosophila for the proper regulation of lipid storage and feeding behaviour, as well as aggression and mating behaviours. Rac2 mutant males and females are susceptible to starvation and contain considerably less lipids than controls. Furthermore, Rac2 mutants also have disrupted feeding behaviour, eating fewer but larger meals than controls. Intriguingly, Rac2 mutant males rarely initiate aggressive behaviour and display significantly increased levels of courtship behaviour towards other males and mated females. From these results we conclude that Rac2 has a central role in regulating the Drosophila homeostatic system.

Chaotic, informational and synchronous behaviour of multiplex networks

NASA Astrophysics Data System (ADS)

Baptista, M. S.; Szmoski, R. M.; Pereira, R. F.; Pinto, S. E. De Souza

2016-03-01

The understanding of the relationship between topology and behaviour in interconnected networks would allow to charac- terise and predict behaviour in many real complex networks since both are usually not simultaneously known. Most previous studies have focused on the relationship between topology and synchronisation. In this work, we provide analytical formulas that shows how topology drives complex behaviour: chaos, information, and weak or strong synchronisation; in multiplex net- works with constant Jacobian. We also study this relationship numerically in multiplex networks of Hindmarsh-Rose neurons. Whereas behaviour in the analytically tractable network is a direct but not trivial consequence of the spectra of eigenvalues of the Laplacian matrix, where behaviour may strongly depend on the break of symmetry in the topology of interconnections, in Hindmarsh-Rose neural networks the nonlinear nature of the chemical synapses breaks the elegant mathematical connec- tion between the spectra of eigenvalues of the Laplacian matrix and the behaviour of the network, creating networks whose behaviour strongly depends on the nature (chemical or electrical) of the inter synapses.

Influences of appearance-behaviour congruity on memory and social judgements.

PubMed

Cassidy, Brittany S; Gutchess, Angela H

2015-01-01

Prior work shows that appearance-behaviour congruity impacts memory and evaluations. Building upon prior work, we assessed influences of appearance-behaviour congruity on source memory and judgement strength to illustrate ways congruity effects permeate social cognition. We paired faces varying on trustworthiness with valenced behaviours to create congruent and incongruent face-behaviour pairs. Young and older adults remembered congruent pairs better than incongruent, but both were remembered better than pairs with faces rated average in appearance. This suggests that multiple, even conflicting, valenced cues improve memory over receiving fewer cues. Consistent with our manipulation of facial trustworthiness, congruity effects were present in the strength of trustworthiness-related but not dominance judgements. Subtle age differences emerged in congruity effects when learning about others, with older adults showing effects for approach judgements given both high and low arousal behaviours. Young adults had congruity effects for approach, prosociality and trustworthiness judgements, given high arousal behaviours only. These findings deepen our understanding of how appearance-behaviour congruity impacts memory for and evaluations of others.

Behavioural intervention practices for stereotypic and repetitive behaviour in individuals with autism spectrum disorder: a systematic review.

PubMed

Patterson, Stephanie Y; Smith, Veronica; Jelen, Michaela

2010-04-01

The purpose of this systematic review was to examine the quality of conduct of experimental studies contributing to our empirical understanding of function-based behavioural interventions for stereotypic and repetitive behaviours (SRBs) in individuals with autism spectrum disorders (ASDs). Systematic review methodology was used to identify relevant articles, to rate the level of evidence and quality of conduct of the studies, and to extract data systematically. Ten single case studies examining 17 participants (14 males, 3 females; age 2y 11mo-26y) diagnosed with various ASDs were included. Overall, studies reported decreases in SRBs using behavioural interventions and some collateral increase in desirable behaviours. Only a small number of intervention studies for SRBs explicitly state the function of the behaviour; therefore, relatively little is known about the efficacy of SRB interventions in relation to the range of possible behavioural functions. Evidence supporting SRB interventions is preliminary in nature, and caution should be used in choosing and implementing SRB intervention practices for individuals with ASDs.

75 FR 57441 - Aluminum Extrusions From the People's Republic of China: Alignment of Final Countervailing Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... DEPARTMENT OF COMMERCE International Trade Administration [C-570-968] Aluminum Extrusions From the... countervailing duty investigation of aluminum extrusions from the People's Republic of China (PRC) with the final... antidumping duty investigations on aluminum extrusions from the PRC. See Aluminum Extrusions from the People's...

40 CFR 63.5746 - How do I demonstrate compliance with the emission limits for aluminum wipedown solvents and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the emission limits for aluminum wipedown solvents and aluminum coatings? 63.5746 Section 63.5746... Hazardous Air Pollutants for Boat Manufacturing Standards for Aluminum Recreational Boat Surface Coating Operations § 63.5746 How do I demonstrate compliance with the emission limits for aluminum wipedown solvents...

49 CFR 178.505 - Standards for aluminum drums.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Standards for aluminum drums. 178.505 Section 178... PACKAGINGS Non-bulk Performance-Oriented Packaging Standards § 178.505 Standards for aluminum drums. (a) The following are the identification codes for aluminum drums: (1) 1B1 for a non-removable head aluminum drum...

Cr-Free Metallic-Ceramic Coatings

DTIC Science & Technology

2014-11-01

Comparable to Aluminum-Chromate/ Phosphate Humidity Resistance Galvanic Corrosion Resistance Nov. 2014 ASETSDefense 2014, Fort Myer, VA...Aluminum-Silicate Comparable to Aluminum-Chromate/ Phosphate  Humidity, Galvanic Corrosion , Heat/Salt Resistance  Adhesion & Compatibility...WP-TR-2007-4069, Sept. 2006 Sealed Aluminum-Silicate Not Comparable to Sealed Aluminum-Chromate/ Phosphate in PEWG Evaluation  Corrosion

Gut: An underestimated target organ for Aluminum.

PubMed

Vignal, C; Desreumaux, P; Body-Malapel, M

2016-06-01

Since World War II, several factors such as an impressive industrial growth, an enhanced environmental bioavailability and intensified food consumption have contributed to a significant amplification of human exposure to aluminum. Aluminum is particularly present in food, beverages, some drugs and airbone dust. In our food, aluminum is superimposed via additives and cooking utensils. Therefore, the tolerable intake of aluminum is exceeded for a significant part of the world population, especially in children who are more vulnerable to toxic effects of pollutants than adults. Faced with this oral aluminum influx, intestinal tract is an essential barrier, especially as 38% of ingested aluminum accumulates at the intestinal mucosa. Although still poorly documented to date, the impact of oral exposure to aluminum in conditions relevant to real human exposure appears to be deleterious for gut homeostasis. Aluminum ingestion affects the regulation of the permeability, the microflora and the immune function of intestine. Nowadays, several arguments are consistent with an involvement of aluminum as an environmental risk factor for inflammatory bowel diseases. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Using psychological theory to understand the clinical management of type 2 diabetes in Primary Care: a comparison across two European countries.

PubMed

Hrisos, Susan; Eccles, Martin P; Francis, Jill J; Bosch, Marije; Dijkstra, Rob; Johnston, Marie; Grol, Richard; Kaner, Eileen F S; Steen, Ian N

2009-08-05

Long term management of patients with Type 2 diabetes is well established within Primary Care. However, despite extensive efforts to implement high quality care both service provision and patient health outcomes remain sub-optimal. Several recent studies suggest that psychological theories about individuals' behaviour can provide a valuable framework for understanding generalisable factors underlying health professionals' clinical behaviour. In the context of the team management of chronic disease such as diabetes, however, the application of such models is less well established. The aim of this study was to identify motivational factors underlying health professional teams' clinical management of diabetes using a psychological model of human behaviour. A predictive questionnaire based on the Theory of Planned Behaviour (TPB) investigated health professionals' (HPs') cognitions (e.g., beliefs, attitudes and intentions) about the provision of two aspects of care for patients with diabetes: prescribing statins and inspecting feet.General practitioners and practice nurses in England and the Netherlands completed parallel questionnaires, cross-validated for equivalence in English and Dutch. Behavioural data were practice-level patient-reported rates of foot examination and use of statin medication. Relationships between the cognitive antecedents of behaviour proposed by the TPB and healthcare teams' clinical behaviour were explored using multiple regression. In both countries, attitude and subjective norm were important predictors of health professionals' intention to inspect feet (Attitude: beta = .40; Subjective Norm: beta = .28; Adjusted R2 = .34, p < 0.01), and their intention to prescribe statins (Attitude: beta = .44; Adjusted R2 = .40, p < 0.01). Individuals' self-reported intention did not predict practice-level performance of either clinical behaviour. Using the TPB, we identified modifiable factors underlying health professionals' intentions to perform two clinical behaviours, providing a rationale for the development of targeted interventions. However, we did not observe a relationship between health professionals' intentions and our proxy measure of team behaviour. Significant methodological issues were highlighted concerning the use of models of individual behaviour to explain behaviours performed by teams. In order to investigate clinical behaviours performed by teams it may be necessary to develop measures that reflect the collective cognitions of the members of the team to facilitate the application of these theoretical models to team behaviours.

Using psychological theory to understand the clinical management of type 2 diabetes in Primary Care: a comparison across two European countries

PubMed Central

Hrisos, Susan; Eccles, Martin P; Francis, Jill J; Bosch, Marije; Dijkstra, Rob; Johnston, Marie; Grol, Richard; Kaner, Eileen FS; Steen, Ian N

2009-01-01

Background Long term management of patients with Type 2 diabetes is well established within Primary Care. However, despite extensive efforts to implement high quality care both service provision and patient health outcomes remain sub-optimal. Several recent studies suggest that psychological theories about individuals' behaviour can provide a valuable framework for understanding generalisable factors underlying health professionals' clinical behaviour. In the context of the team management of chronic disease such as diabetes, however, the application of such models is less well established. The aim of this study was to identify motivational factors underlying health professional teams' clinical management of diabetes using a psychological model of human behaviour. Methods A predictive questionnaire based on the Theory of Planned Behaviour (TPB) investigated health professionals' (HPs') cognitions (e.g., beliefs, attitudes and intentions) about the provision of two aspects of care for patients with diabetes: prescribing statins and inspecting feet. General practitioners and practice nurses in England and the Netherlands completed parallel questionnaires, cross-validated for equivalence in English and Dutch. Behavioural data were practice-level patient-reported rates of foot examination and use of statin medication. Relationships between the cognitive antecedents of behaviour proposed by the TPB and healthcare teams' clinical behaviour were explored using multiple regression. Results In both countries, attitude and subjective norm were important predictors of health professionals' intention to inspect feet (Attitude: beta = .40; Subjective Norm: beta = .28; Adjusted R2 = .34, p < 0.01), and their intention to prescribe statins (Attitude: beta = .44; Adjusted R2 = .40, p < 0.01). Individuals' self-reported intention did not predict practice-level performance of either clinical behaviour. Conclusion Using the TPB, we identified modifiable factors underlying health professionals' intentions to perform two clinical behaviours, providing a rationale for the development of targeted interventions. However, we did not observe a relationship between health professionals' intentions and our proxy measure of team behaviour. Significant methodological issues were highlighted concerning the use of models of individual behaviour to explain behaviours performed by teams. In order to investigate clinical behaviours performed by teams it may be necessary to develop measures that reflect the collective cognitions of the members of the team to facilitate the application of these theoretical models to team behaviours. PMID:19656372

Patterns of multiple health risk–behaviours in university students and their association with mental health: application of latent class analysis

PubMed Central

Kwan, M. Y.; Arbour-Nicitopoulos, K. P.; Duku, E.; Faulkner, G.

2016-01-01

Abstract Introduction: University and college campuses may be the last setting where it is possible to comprehensively address the health of a large proportion of the young adult population. It is important that health promoters understand the collective challenges students are facing, and to better understand the broader lifestyle behavioural patterning evident during this life stage. The purpose of this study was to examine the clustering of modifiable health-risk behaviours and to explore the relationship between these identified clusters and mental health outcomes among a large Canadian university sample. Methods: Undergraduate students (n = 837; mean age = 21 years) from the University of Toronto completed the National College Health Assessment survey. The survey consists of approximately 300 items, including assessments of student health status, mental health and health-risk behaviours. Latent class analysis was used to identify patterning based on eight salient health-risk behaviours (marijuana use, other illicit drug use, risky sex, smoking, binge drinking, poor diet, physical inactivity, and insufficient sleep). Results: A three-class model based on student behavioural patterns emerged: “typical,” “high-risk” and “moderately healthy.” Results also found high-risk students reporting significantly higher levels of stress than typical students (χ2(1671) = 7.26, p < .01). Conclusion: Students with the highest likelihood of engaging in multiple health-risk behaviours reported poorer mental health, particularly as it relates to stress. Although these findings should be interpreted with caution due to the 28% response rate, they do suggest that interventions targeting specific student groups with similar patterning of multiple health-risk behaviours may be needed. PMID:27556920

Aluminum as anode for energy storage and conversion: a review

NASA Astrophysics Data System (ADS)

Li, Qingfeng; Bjerrum, Niels J.

Aluminum has long attracted attention as a potential battery anode because of its high theoretical voltage and specific energy. The protective oxide layer on the aluminum surface is however detrimental to the battery performance, contributing to failure to achieve the reversible potential and causing the delayed activation of the anode. By developing aluminum alloys as anodes and solution additives to electrolytes, a variety of aluminum batteries have been extensively investigated for various applications. From molten salt and other non-aqueous electrolytes, aluminum can be electrodeposited and therefore be suitable for developing rechargable batteries. Considerable efforts have been made to develop secondary aluminum batteries of high power density. In the present paper, these research activities are reviewed, including aqueous electrolyte primary batteries, aluminum-air batteries and molten salt secondary batteries.

Diffuse Parenchymal Diseases Associated With Aluminum Use and Primary Aluminum Production

PubMed Central

2014-01-01

Aluminum use and primary aluminum production results in the generation of various particles, fumes, gases, and airborne materials with the potential for inducing a wide range of lung pathology. Nevertheless, the presence of diffuse parenchymal or interstitial lung disease related to these processes remains controversial. The relatively uncommon occurrence of interstitial lung diseases in aluminum-exposed workers—despite the extensive industrial use of aluminum—the potential for concurrent exposure to other fibrogenic fibers, and the previous use of inhaled aluminum powder for the prevention of silicosis without apparent adverse respiratory effects are some of the reasons for this continuing controversy. Specific aluminum-induced parenchymal diseases described in the literature, including existing evidence of interstitial lung diseases, associated with primary aluminum production are reviewed. PMID:24806728

Decarbonization process for carbothermically produced aluminum

DOEpatents

Bruno, Marshall J.; Carkin, Gerald E.; DeYoung, David H.; Dunlap, Sr., Ronald M.

2015-06-30

A method of recovering aluminum is provided. An alloy melt having Al.sub.4C.sub.3 and aluminum is provided. This mixture is cooled and then a sufficient amount of a finely dispersed gas is added to the alloy melt at a temperature of about 700.degree. C. to about 900.degree. C. The aluminum recovered is a decarbonized carbothermically produced aluminum where the step of adding a sufficient amount of the finely dispersed gas effects separation of the aluminum from the Al.sub.4C.sub.3 precipitates by flotation, resulting in two phases with the Al.sub.4C.sub.3 precipitates being the upper layer and the decarbonized aluminum being the lower layer. The aluminum is then recovered from the Al.sub.4C.sub.3 precipitates through decanting.

Al adjuvants can be tracked in viable cells by lumogallion staining.

PubMed

Mile, Irene; Svensson, Andreas; Darabi, Anna; Mold, Matthew; Siesjö, Peter; Eriksson, Håkan

2015-07-01

The mechanism behind the adjuvant effect of aluminum salts is poorly understood notwithstanding that aluminum salts have been used for decades in clinical vaccines. In an aqueous environment and at a nearly neutral pH, the aluminum salts form particulate aggregates, and one plausible explanation of the lack of information regarding the mechanisms could be the absence of an efficient method of tracking phagocytosed aluminum adjuvants and thereby the intracellular location of the adjuvant. In this paper, we want to report upon the use of lumogallion staining enabling the detection of phagocytosed aluminum adjuvants inside viable cells. Including micromolar concentrations of lumogallion in the culture medium resulted in a strong fluorescence signal from cells that had phagocytosed the aluminum adjuvant. The fluorescence appeared as spots in the cytoplasm and by confocal microscopy and co-staining with probes presenting fluorescence in the far-red region of the spectrum, aluminum adjuvants could to a certain extent be identified as localized in acidic vesicles, i.e., lysosomes. Staining and detection of intracellular aluminum adjuvants was achieved not only by diffusion of lumogallion into the cytoplasm, thereby highlighting the presence of the adjuvant, but also by pre-staining the aluminum adjuvant prior to incubation with cells. Pre-staining of aluminum adjuvants resulted in bright fluorescent particulate aggregates that remained fluorescent for weeks and with only a minor reduction of fluorescence upon extensive washing or incubation with cells. Both aluminum oxyhydroxide and aluminum hydroxyphosphate, two of the most commonly used aluminum adjuvants in clinical vaccines, could be pre-stained with lumogallion and were easily tracked intracellularly after incubation with phagocytosing cells. Staining of viable cells using lumogallion will be a useful method in investigations of the mechanisms behind aluminum adjuvants' differentiation of antigen-presenting cells into inflammatory cells. Information will be gained regarding the phagosomal pathways and the events inside the phagosomes, and thereby the ultimate fate of phagocytosed aluminum adjuvants could be resolved. Copyright © 2015 Elsevier B.V. All rights reserved.

Why is changing health-related behaviour so difficult?

PubMed

Kelly, Michael P; Barker, Mary

2016-07-01

To demonstrate that six common errors made in attempts to change behaviour have prevented the implementation of the scientific evidence base derived from psychology and sociology; to suggest a new approach which incorporates recent developments in the behavioural sciences. The role of health behaviours in the origin of the current epidemic of non-communicable disease is observed to have driven attempts to change behaviour. It is noted that most efforts to change health behaviours have had limited success. This paper suggests that in policy-making, discussions about behaviour change are subject to six common errors and that these errors have made the business of health-related behaviour change much more difficult than it needs to be. Overview of policy and practice attempts to change health-related behaviour. The reasons why knowledge and learning about behaviour have made so little progress in alcohol, dietary and physical inactivity-related disease prevention are considered, and an alternative way of thinking about the behaviours involved is suggested. This model harnesses recent developments in the behavioural sciences. It is important to understand the conditions preceding behaviour psychologically and sociologically and to combine psychological ideas about the automatic and reflective systems with sociological ideas about social practice. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Behavioural inventory of the giraffe (Giraffa camelopardalis).

PubMed

Seeber, Peter A; Ciofolo, Isabelle; Ganswindt, André

2012-11-22

Numerous factors like continuous habitat reduction or fragmentation for free-ranging giraffes (Giraffa camelopardalis) as well as e.g. suboptimal housing conditions for animals in captivity might lead to behavioural alterations as part of the overall adaptation process to the changing living conditions. In order to facilitate current and future studies on giraffe behaviour, a comprehensive ethogram was compiled based on existing literature, as well as observations on giraffes in the wild (Hwange National Park, Zimbabwe; Entabeni Game Reserve, South Africa), and in captivity (National Zoological Gardens of South Africa, Pretoria). The resulting ethogram lists 65 different behavioural patterns, which were described and grouped into seven categories: General activities, Abnormal repetitive behaviours, General interactions, Bull-Cow behaviour, Bull-Bull behaviour, Cow-Bull behaviour, Maternal behaviours, and Interactions by calves. The behaviours were further described regarding a presumed purpose, particularly with respect to social interactions and sexual behaviour. Contradictory descriptions from previous studies were considered and discussed in comparison with our own observations. This ethogram provides a basis for current and future studies by suggesting a terminology which can be used for harmonizing behavioural observations, thus helping to facilitate comparability of future results. Subsequently, a better understanding of the behavioural ecology of giraffes in the wild as well as in captivity could aid future conservation efforts.

Behavioural inventory of the giraffe (Giraffa camelopardalis)

PubMed Central

2012-01-01

Background Numerous factors like continuous habitat reduction or fragmentation for free-ranging giraffes (Giraffa camelopardalis) as well as e.g. suboptimal housing conditions for animals in captivity might lead to behavioural alterations as part of the overall adaptation process to the changing living conditions. In order to facilitate current and future studies on giraffe behaviour, a comprehensive ethogram was compiled based on existing literature, as well as observations on giraffes in the wild (Hwange National Park, Zimbabwe; Entabeni Game Reserve, South Africa), and in captivity (National Zoological Gardens of South Africa, Pretoria). Findings The resulting ethogram lists 65 different behavioural patterns, which were described and grouped into seven categories: General activities, Abnormal repetitive behaviours, General interactions, Bull-Cow behaviour, Bull-Bull behaviour, Cow-Bull behaviour, Maternal behaviours, and Interactions by calves. The behaviours were further described regarding a presumed purpose, particularly with respect to social interactions and sexual behaviour. Contradictory descriptions from previous studies were considered and discussed in comparison with our own observations. Conclusions This ethogram provides a basis for current and future studies by suggesting a terminology which can be used for harmonizing behavioural observations, thus helping to facilitate comparability of future results. Subsequently, a better understanding of the behavioural ecology of giraffes in the wild as well as in captivity could aid future conservation efforts. PMID:23173954

Design and research on discharge performance for aluminum-air battery

NASA Astrophysics Data System (ADS)

Liu, Zu; Zhao, Junhong; Cai, Yanping; Xu, Bin

2017-01-01

As a kind of clean energy, the research of aluminum air battery is carried out because aluminum-air battery has advantages of high specific energy, silence and low infrared. Based on the research on operating principle of aluminum-air battery, a novel aluminum-air battery system was designed composed of aluminum-air cell and the circulation system of electrolyte. A system model is established to analyze the polarization curve, the constant current discharge performance and effect of electrolyte concentration on the performance of monomer. The experimental results show that the new energy aluminum-air battery has good discharge performance, which lays a foundation for its application.

Method for welding beryllium

DOEpatents

Dixon, Raymond D.; Smith, Frank M.; O'Leary, Richard F.

1997-01-01

A method is provided for joining beryllium pieces which comprises: depositing aluminum alloy on at least one beryllium surface; contacting that beryllium surface with at least one other beryllium surface; and welding the aluminum alloy coated beryllium surfaces together. The aluminum alloy may be deposited on the beryllium using gas metal arc welding. The aluminum alloy coated beryllium surfaces may be subjected to elevated temperatures and pressures to reduce porosity before welding the pieces together. The aluminum alloy coated beryllium surfaces may be machined into a desired welding joint configuration before welding. The beryllium may be an alloy of beryllium or a beryllium compound. The aluminum alloy may comprise aluminum and silicon.

Method for welding beryllium

DOEpatents

Dixon, R.D.; Smith, F.M.; O`Leary, R.F.

1997-04-01

A method is provided for joining beryllium pieces which comprises: depositing aluminum alloy on at least one beryllium surface; contacting that beryllium surface with at least one other beryllium surface; and welding the aluminum alloy coated beryllium surfaces together. The aluminum alloy may be deposited on the beryllium using gas metal arc welding. The aluminum alloy coated beryllium surfaces may be subjected to elevated temperatures and pressures to reduce porosity before welding the pieces together. The aluminum alloy coated beryllium surfaces may be machined into a desired welding joint configuration before welding. The beryllium may be an alloy of beryllium or a beryllium compound. The aluminum alloy may comprise aluminum and silicon. 9 figs.

Ultrafine nanoporous palladium-aluminum film fabricated by citric acid-assisted hot-water-treatment of aluminum-palladium alloy film

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harumoto, Takashi; Tamura, Yohei; Ishiguro, Takashi, E-mail: ishiguro@rs.noda.tus.ac.jp

Hot-water-treatment has been adapted to fabricate ultrafine nanoporous palladium-aluminum film from aluminum-palladium alloy film. Using citric acid as a chelating agent, a precipitation of boehmite (aluminum oxide hydroxide, AlOOH) on the nanoporous palladium-aluminum film was suppressed. According to cross-sectional scanning transmission electron microscopy observations, the ligament/pore sizes of the prepared nanoporous film were considerably small (on the order of 10 nm). Since this fabrication method only requires aluminum alloy film and hot-water with chelating agent, the ultrafine nanoporous film can be prepared simply and environmentally friendly.

Weld Repair of Thin Aluminum Sheet

NASA Technical Reports Server (NTRS)

Beuyukian, C. S.; Mitchell, M. J.

1986-01-01

Weld repairing of thin aluminum sheets now possible, using niobium shield and copper heat sinks. Refractory niobium shield protects aluminum adjacent to hole, while copper heat sinks help conduct heat away from repair site. Technique limits tungsten/inert-gas (TIG) welding bombardment zone to melt area, leaving surrounding areas around weld unaffected. Used successfully to repair aluminum cold plates on Space Shuttle, Commercial applications, especially in sealing fractures, dents, and holes in thin aluminum face sheets or clad brazing sheet in cold plates, heat exchangers, coolers, and Solar panels. While particularly suited to thin aluminum sheet, this process also used in thicker aluminum material to prevent surface damage near weld area.

Strengthening materials specifications

NASA Astrophysics Data System (ADS)

Sampath, K.

2005-10-01

Continuing efforts to strengthen materials specifications readily recognize that a mere compliance with a materials specification only assures a material meeting or exceeding the minimum expectations explicitly detailed in the specification. Implicitly, such efforts also recognize that additional and specific client needs must be addressed as supplementary requirements and introduced during material procurement to reduce risks and assure enhanced performance. This article describes two U.S. Navy-related case studies that allowed further strengthening of the materials specification process, using newer methods and renewed understanding. The first case demonstrates the use of a constraints-based modeling approach to specify the chemical composition of high-performance welding electrodes for critical U.S. Navy applications. This approach helps to distinguish high-performance welding electrode chemical compositions from rich and lean welding electrode chemical compositions that might limit the operational envelope, reduce performance, or both, while increasing overall cost of fabrication but otherwise meet electrode specification requirements. The second case identifies that the size of an ingot could be an important factor while specifying the aluminum and sulfur contents of very large-size, heavy-gauge plates. Renewed understanding of melt fluidity issues associated with the solidification of very large-size ingots shows that deficiencies in through-thickness ductility of heavy-gauge plates are related to controlling aluminum and sulfur contents of the voluminous melt, notwithstanding explicit compliance with specification requirements.

Cyclic Deformation of Ultra-Fine Grained Commercial Purity Aluminum Processed by Accumulative Roll-Bonding.

PubMed

Kwan, Charles C F; Wang, Zhirui

2013-08-13

Accumulative Roll-Bonding (ARB) is one of the more recently developed techniques capable of producing bulk ultra-fine grained (ufg) metals. There are still many aspects of the behavior of ufg metals that lacks an in-depth understanding, such as a generalized view of the factors that govern the cyclic deformation mechanism(s). This study aims to advance the understanding of the cyclic deformation behavior of ufg metals through the systematic investigation of ARB processed aluminum upon cyclic loading. It was found that the cyclic softening response often reported for ufg metals is largely influenced by the microstructure stability as the cyclic softening response is facilitated by grain coarsening which becomes inhibited with highly stable microstructure. On one hand, shear bands resembling braids of dislocations trespassing multiple grains have been observed to operate for the accommodation of the imposed cyclic strain in cases where grain coarsening is largely restricted. On the other hand, it was found that the microstructure stability can be overcome at higher applied cyclic plastic strain levels, leading to grain coarsening and thus a cyclic softening response. The findings in this study have further confirmed that the cyclic softening behavior found in many ufg metals, which may be detrimental in practical applications, can be inhibited by improvements in the microstructure stability.

Cyclic Deformation of Ultra-Fine Grained Commercial Purity Aluminum Processed by Accumulative Roll-Bonding

PubMed Central

Kwan, Charles C.F.; Wang, Zhirui

2013-01-01

Accumulative Roll-Bonding (ARB) is one of the more recently developed techniques capable of producing bulk ultra-fine grained (ufg) metals. There are still many aspects of the behavior of ufg metals that lacks an in-depth understanding, such as a generalized view of the factors that govern the cyclic deformation mechanism(s). This study aims to advance the understanding of the cyclic deformation behavior of ufg metals through the systematic investigation of ARB processed aluminum upon cyclic loading. It was found that the cyclic softening response often reported for ufg metals is largely influenced by the microstructure stability as the cyclic softening response is facilitated by grain coarsening which becomes inhibited with highly stable microstructure. On one hand, shear bands resembling braids of dislocations trespassing multiple grains have been observed to operate for the accommodation of the imposed cyclic strain in cases where grain coarsening is largely restricted. On the other hand, it was found that the microstructure stability can be overcome at higher applied cyclic plastic strain levels, leading to grain coarsening and thus a cyclic softening response. The findings in this study have further confirmed that the cyclic softening behavior found in many ufg metals, which may be detrimental in practical applications, can be inhibited by improvements in the microstructure stability. PMID:28811446

Understanding of hygiene behaviour and diarrhoea in two villages in Botswana.

PubMed

Kaltenthaler, E C; Drasar, B S

1996-06-01

This paper describes a study which took place in two villages in north-east district of Botswana from July 1990 through July 1991. Qualitative data collection methods were used including: observations, key-informant interviews, focus groups, and in-depth interviews. The data were used for understanding and interpreting the cultural belief systems regarding specific hygiene behaviours and diarrhoea, with emphasis on hand washing. Hand washing was said to occur for three main reasons: to remove contamination, for social reasons, and for comfort reasons. Sources of dirt on the hands included human blood and faeces. Many perceived causes of diarrhoea were identified, including pogwana (dehydration associated with sunken anterior fontanelle). Traditional concepts regarding the treatment and prevention of diarrhoea were also identified. It is suggested that beliefs surrounding hygiene behaviour and diarrhoea should be incorporated into health education programmes.

The educational potential of alcohol-related flushing among Chinese young people

PubMed Central

Shell, Duane F.; Huang, Zhaoqing; Qian, Ling

2015-01-01

Aim: This paper describes Chinese university students' understanding of the meaning of the alcohol-related flushing response and how they reacted to their own and someone else's flushing in a group drinking situation. Method: The researcher surveyed 530 Chinese university students about their understanding of flushing and their perception of how people respond to a person who visibly flushes while drinking alcohol. Findings: Most students did not know about the physiological cause of flushing. There were significant gender differences in both reactions to and perception of responses to a person who flushes. There was no direct relationship between flushing and drinking behaviour. Conclusions: This description of flushing behaviour and responses to a flushing person is discussed in terms of educational opportunities to change behaviours that could reduce the cancer related risks of this visibly at-risk group. PMID:25983401

Macro-evolutionary studies of cultural diversity: a review of empirical studies of cultural transmission and cultural adaptation.

PubMed

Mace, Ruth; Jordan, Fiona M

2011-02-12

A growing body of theoretical and empirical research has examined cultural transmission and adaptive cultural behaviour at the individual, within-group level. However, relatively few studies have tried to examine proximate transmission or test ultimate adaptive hypotheses about behavioural or cultural diversity at a between-societies macro-level. In both the history of anthropology and in present-day work, a common approach to examining adaptive behaviour at the macro-level has been through correlating various cultural traits with features of ecology. We discuss some difficulties with simple ecological associations, and then review cultural phylogenetic studies that have attempted to go beyond correlations to understand the underlying cultural evolutionary processes. We conclude with an example of a phylogenetically controlled approach to understanding proximate transmission pathways in Austronesian cultural diversity.

A cross-syndrome evaluation of a new attention rating scale: The Scale of Attention in Intellectual Disability.

PubMed

Freeman, Nerelie C; Gray, Kylie M; Taffe, John R; Cornish, Kim M

2016-10-01

Whilst neuropsychological research has enhanced our understanding of inattentive and hyperactive behaviours among children with intellectual disability (ID), the absence of rating scales developed for this group continues to be a gap in knowledge. This study examined these behaviours in 176 children with autism spectrum disorder (ASD), Down Syndrome (DS), or idiopathic ID using a newly developed teacher rating scale, the Scale of Attention in Intellectual Disability. Findings suggested that children with ASD had a significantly greater breadth of hyperactive/impulsive behaviours than those with DS or idiopathic ID. These findings support existing research suggesting differing profiles of attention and activity across groups. Understanding disorder-specific profiles has implications for developing strategies to support students with ID in the classroom. Copyright © 2016 Elsevier Ltd. All rights reserved.

Macro-evolutionary studies of cultural diversity: a review of empirical studies of cultural transmission and cultural adaptation

PubMed Central

Mace, Ruth; Jordan, Fiona M.

2011-01-01

A growing body of theoretical and empirical research has examined cultural transmission and adaptive cultural behaviour at the individual, within-group level. However, relatively few studies have tried to examine proximate transmission or test ultimate adaptive hypotheses about behavioural or cultural diversity at a between-societies macro-level. In both the history of anthropology and in present-day work, a common approach to examining adaptive behaviour at the macro-level has been through correlating various cultural traits with features of ecology. We discuss some difficulties with simple ecological associations, and then review cultural phylogenetic studies that have attempted to go beyond correlations to understand the underlying cultural evolutionary processes. We conclude with an example of a phylogenetically controlled approach to understanding proximate transmission pathways in Austronesian cultural diversity. PMID:21199844

Understanding behavioural intention to play online game: The case of VocBlast

NASA Astrophysics Data System (ADS)

Ali, Z.

2018-04-01

Research has shown that mobile learning enables its users to learn at any time and place. The current study investigates the use of VocBlast; an app that integrates technical and engineering vocabulary, in terms of understanding the behavioural intention of its players. The study employs 129 engineering and technical students from Universiti Malaysia Pahang (UMP). Online survey was used to collect their opinions; in particular male and female students’ opinions on the use of the app in the future. The results of the study indicated that there was no significant difference pertaining to their behavioural intention using VocBlast in the course of time. The study implies that more time needs to be given to the students in playing VocBlast as it is believed that playing the game repetitively would promote positive perceptions among its players.

A simple approach to polymer mixture miscibility.

PubMed

Higgins, Julia S; Lipson, Jane E G; White, Ronald P

2010-03-13

Polymeric mixtures are important materials, but the control and understanding of mixing behaviour poses problems. The original Flory-Huggins theoretical approach, using a lattice model to compute the statistical thermodynamics, provides the basic understanding of the thermodynamic processes involved but is deficient in describing most real systems, and has little or no predictive capability. We have developed an approach using a lattice integral equation theory, and in this paper we demonstrate that this not only describes well the literature data on polymer mixtures but allows new insights into the behaviour of polymers and their mixtures. The characteristic parameters obtained by fitting the data have been successfully shown to be transferable from one dataset to another, to be able to correctly predict behaviour outside the experimental range of the original data and to allow meaningful comparisons to be made between different polymer mixtures.

Personal Values and Moral Disengagement Promote Aggressive and Rule-Breaking Behaviours in Adolescents With Disruptive Behaviour Disorders: A Pilot Study.

PubMed

Paciello, Marinella; Muratori, Pietro; Ruglioni, Laura; Milone, Annarita; Buonanno, Carlo; Capo, Rosario; Lochman, John E; Barcaccia, Barbara

2017-01-01

The pilot study presented in this article investigated the role of moral-cognitive features in understanding aggressive and rule-breaking behaviours in adolescents with Disruptive Behaviour Disorder (DBD). We collected two samples. The community sample was composed of 85 adolescents, whereas the DBD sample was composed of 30 adolescents. Compared with a community sample, adolescents with DBD are more inclined to use moral disengagement (MD) to legitimize their aggressive and rule-breaking behaviours. Moreover, regression models showed that self-enhancement values and MD foster externalizing behaviours taking into account both gender and the group they belonged to, that is, either clinical or community sample. Instead, self-transcendence values could prevent externalizing problems by inhibiting MD. Implications of these findings for assessment and therapeutic interventions are discussed. © The Author(s) 2015.

Monitoring Animal Behaviour and Environmental Interactions Using Wireless Sensor Networks, GPS Collars and Satellite Remote Sensing

PubMed Central

Handcock, Rebecca N.; Swain, Dave L.; Bishop-Hurley, Greg J.; Patison, Kym P.; Wark, Tim; Valencia, Philip; Corke, Peter; O'Neill, Christopher J.

2009-01-01

Remote monitoring of animal behaviour in the environment can assist in managing both the animal and its environmental impact. GPS collars which record animal locations with high temporal frequency allow researchers to monitor both animal behaviour and interactions with the environment. These ground-based sensors can be combined with remotely-sensed satellite images to understand animal-landscape interactions. The key to combining these technologies is communication methods such as wireless sensor networks (WSNs). We explore this concept using a case-study from an extensive cattle enterprise in northern Australia and demonstrate the potential for combining GPS collars and satellite images in a WSN to monitor behavioural preferences and social behaviour of cattle. PMID:22412327

The role of behaviour in adaptive morphological evolution of African proboscideans.

PubMed

Lister, Adrian M

2013-08-15

The fossil record richly illustrates the origin of morphological adaptation through time. However, our understanding of the selective forces responsible in a given case, and the role of behaviour in the process, is hindered by assumptions of synchrony between environmental change, behavioural innovation and morphological response. Here I show, from independent proxy data through a 20-million-year sequence of fossil proboscideans in East Africa, that changes in environment, diet and morphology are often significantly offset chronologically, allowing dissection of the roles of behaviour and different selective drivers. These findings point the way to hypothesis-driven testing of the interplay between habitat change, behaviour and morphological adaptation with the use of independent proxies in the fossil record.

Sustaining the environment through recycling: an empirical study.

PubMed

Ramayah, T; Lee, Jason Wai Chow; Lim, Shuwen

2012-07-15

This paper examines the determinants of recycling behaviour among 200 university students from the perspective of the theory of planned behaviour (TPB). Data was analysed using Structural Equation Modelling technique. Findings indicate that environmental awareness was significantly related to attitude towards recycling, whilst attitude and social norms had significant impact on recycling behaviour. However, convenience and cost of recycling were not significant reasons for recycling. The study has enhanced the understanding of the determinants of recycling behaviour and has implications for schools and governmental agencies in educating and encouraging positive recycling behaviour. It also confirms the appropriateness of the TPB in examining studies of this nature. Further suggestions for future research are offered. Copyright © 2012 Elsevier Ltd. All rights reserved.

REGENERATION OF REACTOR FUEL ELEMENTS

DOEpatents

Lyon, W.L.

1960-04-01

A process is described for concentrating uranium and/or plutonium metal in aluminum alloys in which the actinide content was partially consumed by neutron bombardinent. Two embodiments are claimed: Either the alloy is heated, together with zinc chloride to at least 1000 deg C whereby some aluminum, in the form of aluminum chloride, and any zinc formed volatilize; or else aluminum fluoride is added and reacted at 800 to 1000 deg O and substmospheric pressure whereby pant of the aluminum volatilizes and aluminum subfluoride.

Understanding the context for pet cat and dog feeding and exercising behaviour among pet owners in Ireland: a qualitative study.

PubMed

Downes, Martin J; Devitt, Catherine; Downes, Marie T; More, Simon J

2017-01-01

Pet cat and dog obesity contributes to increased risk of several diseases, including cancer and diabetes mellitus as well as a worsening of orthopaedic problems, and a reduction in survival rate. This study aims to develop a better understanding of cat and dog owners' self-reported beliefs and factors that influence owner behaviour around feeding and exercising their pet cat or dog, as there is a lack of in-depth understanding in this area. Seven focus group discussions, with 43 pet owners in total, were conducted. Pet owners often reported a perceived a low level of control over feeding; often undermined by other people feeding of their pet, their pets begging for food, and their pets attitude towards food. Treats were used in the absence of owner control over pet begging and emotional attachment, and to influence pet behaviour. The majority of participants had positive attitudes to pet exercise, which could be related to pet specific requirements, especially differences in cats and dogs. There were some negative experiences of stress associated with dog walking and fears over aggressive confrontations with other dogs. Feeding one's pet is influenced by beliefs about pet specific needs, pet food and pet health, pet owners' perceived control over feeding, and the implications for the pet owner. Pet exercise is influenced by beliefs about pet specific exercise needs, and the implications of exercising one's pet for the pet owner. Understanding owner behaviours on feeding and exercise allows for a more targeted approach to preventing and treating pet obesity.

Patients subject to high levels of coercion: staff's understanding.

PubMed

Bowers, Len; Wright, Steve; Stewart, Duncan

2014-05-01

Measures to keep staff and patients safe (containment) frequently involve coercion. A small proportion of patients is subject to a large proportion of containment use. To reduce the use of containment, we need a better understanding of the circumstances in which it is used and the understandings of patients and staff. Two sweeps were made of all the wards, spread over four hospital sites, in one large London mental health organization to identify patients who had been subject to high levels of containment in the previous two weeks. Data were then extracted from their case notes about their past history, current problem behaviours, and how they were understood by the patients involved and the staff. Nurses and consultant psychiatrists were interviewed to supplement the information from the case records. Twenty-six heterogeneous patients were identified, with many ages, genders, diagnoses, and psychiatric specialities represented. The main problem behaviours giving rise to containment use were violence and self-harm. The roots of the problem behaviours were to be found in severe psychiatric symptoms, cognitive difficulties, personality traits, and the implementation of the internal structure of the ward by staff. Staff's range and depth of understandings was limited and did not include functional analysis, defence mechanisms, specific cognitive assessment, and other potential frameworks. There is a need for more in-depth assessment and understanding of patients' problems, which may lead to additional ways to reduce containment use.

[Effects of aluminum on neurobehavioral function and metabolism of monoamine neurotransmitter].

PubMed

Yang, H; Zheng, Y; Liang, Y

1998-03-01

To evaluate the effects of occupational exposure to aluminum on neurobahavioral function and metabolism of monoamine neurotransmitter. Thirty-three workers exposed to aluminum and 40 controls were studied. Air aluminum concentrations in workplace environment were detected with an atomic absorption spectrophotometer, homovanillic acid (HVA) and vanilylmandellic acid (VMA) in urine and aluminum in serum and urine were detected with high perfolmance liquid chromatography. Neurobehavioral function was tested with Neurobehavioral Core Test Battery recommended by WHO. Geometric time-weighted average of aluminum in workplace environment was 0.95 mg/m3, ranging from 0.31 to 4.12 mg/m3, and urine aluminum levels in workers exposed to aluminum averaged 12.25 micrograms/L, significantly higher than that in controls (5.78 micrograms/L). There was no significant difference in serum aluminum between the exposed and controls. Both urine VMA and HVA levels were higher in the workers exposed to aluminum, and urine VMA level in the exposed was significantly higher than that in controls. There was significant difference in neurobehavioral test, including Santa Ana, digit symbol and Benton tests between the exposed and control workers. It suggests that occupational exposure to low level of aluminum can affect the neurobehavioral function and metabolism of monoamine neurotransmitter.

Polyacrylonitrile Separator for High-Performance Aluminum Batteries with Improved Interface Stability.

PubMed

Elia, Giuseppe Antonio; Ducros, Jean-Baptiste; Sotta, Dane; Delhorbe, Virginie; Brun, Agnès; Marquardt, Krystan; Hahn, Robert

2017-11-08

Herein we report, for the first time, an overall evaluation of commercially available battery separators to be used for aluminum batteries, revealing that most of them are not stable in the highly reactive 1-ethyl-3-methylimidazolium chloride:aluminum trichloride (EMIMCl:AlCl 3 ) electrolyte conventionally employed in rechargeable aluminum batteries. Subsequently, a novel highly stable polyacrylonitrile (PAN) separator obtained by the electrospinning technique for application in high-performance aluminum batteries has been prepared. The developed PAN separator has been fully characterized in terms of morphology, thermal stability, and air permeability, revealing its suitability as a separator for battery applications. Furthermore, extremely good compatibility and improved aluminum interface stability in the highly reactive EMIMCl:AlCl 3 electrolyte were discovered. The use of the PAN separator strongly affects the aluminum dissolution/deposition process, leading to a quite homogeneous deposition compared to that of a glass fiber separator. Finally, the applicability of the PAN separator has been demonstrated in aluminum/graphite cells. The electrochemical tests evidence the full compatibility of the PAN separator in aluminum cells. Furthermore, the aluminum/graphite cells employing the PAN separator are characterized by a slightly higher delivered capacity compared to those employing glass fiber separators, confirming the superior characteristics of the PAN separator as a more reliable separator for the emerging aluminum battery technology.

[Comparison of texture distribution of cold rolled DC and CC AA 5052 aluminum alloy at different positions through thickness direction by XRD].

PubMed

Chen, Ming-biao; Ma, Min; Yang, Qing-xiang; Wang, Shan; Liu, Wen-chang; Zhao, Ying-mei

2013-09-01

To provide gist of DC AA 5052 and CC AA 5052 aluminum alloy to industry production and application, the texture variation of cold rolled sheets through thickness direction was studied by X-ray diffraction method, and the difference in texture at surface, quarter and center layer was analyzed. The hot plates of direct chill cast (DC) AA 5052 and continuous cast (CC) AA 5052 aluminum alloy were annealed at 454 degrees C for 4 hours and then cold rolled to different reductions. The strength and volume fraction of the fiber in CC AA 5052 aluminum alloy is larger than in DC AA 5052 aluminum alloy after same rolling reduction The volume fraction of the recrystallization texture cube in the CC AA 5052 aluminum alloy is less than in the DC AA 5052 aluminum alloy, which result in that CC AA 5052 aluminum alloy needs less cold rolling reduction than DC AA 5052 aluminum alloy for generating the texture with same intensity and volume fraction at surface layer, quarter layer and center layer. The manufacturability and performance of CC AA 5052 aluminum alloy is superior to DC AA 5052 aluminum alloy for use in stamping.

Hydrolysis of aluminum dross material to achieve zero hazardous waste.

PubMed

David, E; Kopac, J

2012-03-30

A simple method with high efficiency for generating high pure hydrogen by hydrolysis in tap water of highly activated aluminum dross is established. Aluminum dross is activated by mechanically milling to particles of about 45 μm. This leads to removal of surface layer of the aluminum particles and creation of a fresh chemically active metal surface. In contact with water the hydrolysis reaction takes place and hydrogen is released. In this process a Zero Waste concept is achieved because the other product of reaction is aluminum oxide hydroxide (AlOOH), which is nature-friendly and can be used to make high quality refractory or calcium aluminate cement. For comparison we also used pure aluminum powder and alkaline tap water solution (NaOH, KOH) at a ratio similar to that of aluminum dross content. The rates of hydrogen generated in hydrolysis reaction of pure aluminum and aluminum dross have been found to be similar. As a result of the experimental setup, a hydrogen generator was designed and assembled. Hydrogen volume generated by hydrolysis reaction was measured. The experimental results obtained reveal that aluminum dross could be economically recycled by hydrolysis process with achieving zero hazardous aluminum dross waste and hydrogen generation. Copyright © 2012 Elsevier B.V. All rights reserved.

Technology for High Pure Aluminum Oxide Production from Aluminum Scrap

NASA Astrophysics Data System (ADS)

Ambaryan, G. N.; Vlaskin, M. S.; Shkolnikov, E. I.; Zhuk, A. Z.

2017-10-01

In this study a simple ecologically benign technology of high purity alumina production is presented. The synthesis process consists of three steps) oxidation of aluminum in water at temperature of 90 °C) calcinations of Al hydroxide in atmosphere at 1100 °C) high temperature vacuum processing of aluminum alpha oxide at 1750 °C. Oxidation of aluminum scrap was carried out under intensive mixing in water with small addition of KOH as a catalyst. It was shown that under implemented experimental conditions alkali was continuously regenerated during oxidation reaction and synergistic effect of low content alkali aqueous solution and intensive mixing worked. The product of oxidation of aluminum scrap is the powder of Al(OH)3. Then it can be preliminary granulated or directly subjected to thermal treatment deleting the impurities from the product (aluminum oxide). It was shown the possibility to produce the high-purity aluminum oxide of 5N grade (99.999 %). Aluminum oxide, synthesized by means of the proposed method, meets the requirements of industrial manufacturers of synthetic sapphire (aluminum oxide monocrystals). Obtained high pure aluminum oxide can be also used for the manufacture of implants, artificial joints, microscalpels, high-purity ceramics and other refractory shapes for manufacture of ultra-pure products.

A dynamic inert metal anode.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hryn, J. N.

1998-11-09

A new concept for a stable anode for aluminum electrowinning is described. The anode consists of a cup-shaped metal alloy container filled with a molten salt that contains dissolved aluminum. The metal alloy can be any of a number of alloys, but it must contain aluminum as a secondary alloying metal. A possible alloy composition is copper with 5 to 15 weight percent aluminum. In the presence of oxygen, aluminum on the metal anode's exterior surface forms a continuous alumina film that is thick enough to protect the anode from chemical attack by cryolite during electrolysis and thin enough tomore » maintain electrical conductivity. However, the alumina film is soluble in cryolite, so it must be regenerated in situ. Film regeneration is achieved by the transport of aluminum metal from the anode's molten salt interior through the metal wall to the anode's exterior surface, where the transported aluminum oxidizes to alumina in the presence of evolving oxygen to maintain the protective alumina film. Periodic addition of aluminum metal to the anode's interior keeps the aluminum activity in the molten salt at the desired level. This concept for an inert anode is viable as long as the amount of aluminum produced at the cathode greatly exceeds the amount of aluminum required to maintain the anode's protective film.« less

Formulation and method for preparing gels comprising hydrous aluminum oxide

DOEpatents

Collins, Jack L.

2014-06-17

Formulations useful for preparing hydrous aluminum oxide gels contain a metal salt including aluminum, an organic base, and a complexing agent. Methods for preparing gels containing hydrous aluminum oxide include heating a formulation to a temperature sufficient to induce gel formation, where the formulation contains a metal salt including aluminum, an organic base, and a complexing agent.

Cast B2-phase iron-aluminum alloys with improved fluidity

DOEpatents

Maziasz, Philip J.; Paris, Alan M.; Vought, Joseph D.

2002-01-01

Systems and methods are described for iron aluminum alloys. A composition includes iron, aluminum and manganese. A method includes providing an alloy including iron, aluminum and manganese; and processing the alloy. The systems and methods provide advantages because additions of manganese to iron aluminum alloys dramatically increase the fluidity of the alloys prior to solidification during casting.

40 CFR 63.5753 - How do I calculate the combined organic HAP content of aluminum wipedown solvents and aluminum...

Code of Federal Regulations, 2012 CFR

2012-07-01

... organic HAP content of aluminum wipedown solvents and aluminum recreational boat surface coatings? 63.5753...) National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing Standards for Aluminum Recreational Boat Surface Coating Operations § 63.5753 How do I calculate the combined organic HAP content of...

40 CFR 63.5753 - How do I calculate the combined organic HAP content of aluminum wipedown solvents and aluminum...

Code of Federal Regulations, 2014 CFR

2014-07-01

... organic HAP content of aluminum wipedown solvents and aluminum recreational boat surface coatings? 63.5753...) National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing Standards for Aluminum Recreational Boat Surface Coating Operations § 63.5753 How do I calculate the combined organic HAP content of...

40 CFR 63.5753 - How do I calculate the combined organic HAP content of aluminum wipedown solvents and aluminum...

Code of Federal Regulations, 2013 CFR

2013-07-01

... HAP content of aluminum wipedown solvents and aluminum recreational boat surface coatings? 63.5753...) National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing Standards for Aluminum Recreational Boat Surface Coating Operations § 63.5753 How do I calculate the combined organic HAP content of...

Numerical Simulation and Chaotic Analysis of an Aluminum Holding Furnace

NASA Astrophysics Data System (ADS)

Wang, Ji-min; Zhou, Yuan-yuan; Lan, Shen; Chen, Tao; Li, Jie; Yan, Hong-jie; Zhou, Jie-min; Tian, Rui-jiao; Tu, Yan-wu; Li, Wen-ke

2014-12-01

To achieve high heat efficiency, low pollutant emission and homogeneous melt temperature during thermal process of secondary aluminum, taking into account the features of aluminum alloying process, a CFD process model was developed and integrated with heat load and aluminum temperature control model. This paper presented numerical simulation of aluminum holding furnaces using the customized code based on FLUENT packages. Thermal behaviors of aluminum holding furnaces were investigated by probing into main physical fields such as flue gas temperature, velocity, and concentration, and combustion instability of aluminum holding process was represented by chaos theory. The results show that aluminum temperature uniform coefficient firstly decreases during heating phase, then increases and reduces alternately during holding phase, lastly rises during standing phase. Correlation dimension drops with fuel velocity. Maximal Lyapunov exponent reaches to a maximum when air-fuel ratio is close to 1. It would be a clear comprehension about each phase of aluminum holding furnaces to find new technology, retrofit furnace design, and optimize parameters combination.