An Analysis of Maxillary Anterior Teeth Dimensions for the Existence of Golden Proportion: Clinical Study.

PubMed

Sandeep, Nalla; Satwalekar, Parth; Srinivas, Siva; Reddy, Chandra Sekhar; Reddy, G Ramaswamy; Reddy, B Anantha

2015-09-01

Appearance of the face is a great concern to everyone, as it is a significant part of self-image. The study analyzed the clinical crown dimensions of the maxillary anterior teeth with respect to their apparent mesiodistal widths, width-to-height ratio to determine whether golden proportion existed among the South Indian population. A total of 240 dentulous subjects were chosen for the study (120 males and 120 females) age ranging between 18 and 28 years. Full face and anterior teeth images of the subjects were made on specially designed device resembling a face-bow, mounted onto the wall under a standard light source. The width and height of the maxillary central incisors were measured on the stone casts using a digital caliper. The mean perceived maxillary lateral incisor to central incisor width ratio was 0.67 in males and 0.703 in females. The mean perceived maxillary canine to lateral incisor width ratio was 0.744 in males and 0.714 in females. The mean width-to-height ratio of the maxillary central incisor was 79.49% in males and 79.197% in females. The golden proportion was not found between perceived mesiodistal widths of maxillary central and lateral incisors and nor between perceived mesiodistal widths of maxillary lateral incisors and canines. In the majority of subjects, the width-to-height ratio of maxillary central incisor was within 75-80%. There are no statistically significant differences in maxillary anterior teeth proportions between males and females. The results may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery.

Extraction of Maxillary Central Incisors: An Orthodontic-Restorative Treatment

PubMed Central

Hedayati, Zohreh; Zare, Maryam; Bahramnia, Fateme

2014-01-01

Malformed central incisors with poor prognosis could be candidates for extraction especially in crowded dental arches. This case report refers to a 12-year-old boy who suffered from malformed upper central incisors associated with severe attrition. Upper lateral incisors were positioned palatally and canines were rotated and positioned in the high buccal area. The patient had class II malocclusion and space deficiency in both dental arches. Due to incisal wear and malformed short maxillary central incisors and the need for root canal therapy with a major crown build-up, these teeth were extracted. The maxillary lateral incisors were substituted. Thus the maxillary canines were substituted for lateral incisors and the first premolars were substituted for canines. In the lower dental arch the first bicuspids were extracted. Composite resin build-up was performed on the maxillary lateral incisors and canines. This allowed for the crowding and the malocclusion to be corrected. Subsequent gingivectomy improved the patient's gingival margins and smile esthetics one month after orthodontic therapy. PMID:25400954

Dual odontogenic origins develop at the early stage of rat maxillary incisor development.

PubMed

Kriangkrai, Rungarun; Iseki, Sachiko; Eto, Kazuhiro; Chareonvit, Suconta

2006-03-01

Developmental process of rat maxillary incisor has been studied through histological analysis and investigation of tooth-related gene expression patterns at initial tooth development. The tooth-related genes studied here are fibroblast growth factor-8 (Fgf-8), pituitary homeobox gene-2 (Pitx-2), sonic hedgehog (Shh), muscle segment homeobox-1 (Msx-1), paired box-9 (Pax-9) and bone morphogenetic protein-4 (Bmp-4). The genes are expressed in oral epithelium and/or ectomesenchyme at the stage of epithelial thickening to the early bud stage of tooth development. Both the histological observation and tooth-related gene expression patterns during early stage of maxillary incisor development demonstrate that dual odontogenic origins aligned medio-laterally in the medial nasal process develop, subsequently only single functional maxillary incisor dental placode forms. The cascade of tooth-related gene expression patterns in rat maxillary incisor studied here is quite similar to those of the previous studies in mouse mandibular molar, even though the origins of oral epithelium and ectomesenchyme involved in development of maxillary incisor and mandibular molar are different. Thus, we conclude that maxillary incisor and mandibular molar share a similar signaling control of Fgf-8, Pitx-2, Shh, Msx-1, Pax-9 and Bmp-4 genes at the stage of oral epithelial thickening to the early bud stage of tooth development.

How much incisor decompensation is achieved prior to orthognathic surgery?

PubMed

McNeil, Calum; McIntyre, Grant T; Laverick, Sean

2014-07-01

To quantify incisor decompensation in preparation for orthognathic surgery. Pre-treatment and pre-surgery lateral cephalograms for 86 patients who had combined orthodontic and orthognathic treatment were digitised using OPAL 2.1 [http://www.opalimage.co.uk]. To assess intra-observer reproducibility, 25 images were re-digitised one month later. Random and systematic error were assessed using the Dahlberg formula and a two-sample t-test, respectively. Differences in the proportions of cases where the maxillary (1100 +/- 60) or mandibular (900 +/- 60) incisors were fully decomensated were assessed using a Chi-square test (p<0.05). Mann-Whitney U tests were used to identify if there were any differences in the amount of net decompensation for maxillary and mandibular incisors between the Class II combined and Class III groups (p<0.05). Random and systematic error were less than 0.5 degrees and p<0.05, respectively. A greater proportion of cases had decompensated mandibular incisors (80%) than maxillary incisors (62%) and this difference was statistically significant (p=0.029). The amount of maxillary incisor decompensation in the Class II and Class III groups did not statistically differ (p=0.45) whereas the mandibular incisors in the Class III group underwent statistically significantly greater decompensation (p=0.02). Mandibular incisors were decompensated for a greater proportion of cases than maxillary incisors in preparation for orthognathic surgery. There was no difference in the amount of maxillary incisor decompensation between Class II and Class III cases. There was a greater net decompensation for mandibular incisors in Class III cases when compared to Class II cases. Key words:Decompensation, orthognathic, pre-surgical orthodontics, surgical-orthodontic.

Orthodontic intrusion of maxillary incisors: a 3D finite element method study

PubMed Central

Saga, Armando Yukio; Maruo, Hiroshi; Argenta, Marco André; Maruo, Ivan Toshio; Tanaka, Orlando Motohiro

2016-01-01

Objective: In orthodontic treatment, intrusion movement of maxillary incisors is often necessary. Therefore, the objective of this investigation is to evaluate the initial distribution patterns and magnitude of compressive stress in the periodontal ligament (PDL) in a simulation of orthodontic intrusion of maxillary incisors, considering the points of force application. Methods: Anatomic 3D models reconstructed from cone-beam computed tomography scans were used to simulate maxillary incisors intrusion loading. The points of force application selected were: centered between central incisors brackets (LOAD 1); bilaterally between the brackets of central and lateral incisors (LOAD 2); bilaterally distal to the brackets of lateral incisors (LOAD 3); bilaterally 7 mm distal to the center of brackets of lateral incisors (LOAD 4). Results and Conclusions: Stress concentrated at the PDL apex region, irrespective of the point of orthodontic force application. The four load models showed distinct contour plots and compressive stress values over the midsagittal reference line. The contour plots of central and lateral incisors were not similar in the same load model. LOAD 3 resulted in more balanced compressive stress distribution. PMID:27007765

Conservative treatment of an ankylosed tooth after delayed replantation: a case report.

PubMed

Díaz, Jaime Andrés; Sandoval, Hector Paulo; Pineda, Patricia Irene; Junod, Pablo Antonio

2007-10-01

An 8-year-old boy sustained avulsion of his upper right maxillary central incisor and lateral luxation of his upper left maxillary incisors. Subsequently, the upper right maxillary central incisor developed replacement resorption, and both upper left maxillary incisors developed pulpal canal obliteration. In the ankylosed tooth, decoronation procedure was performed, and in the 44-month follow-up period the involved alveolar site showed vertical apposition of bone and continuing replacement resorption. Decoronation is a surgical procedure that allows preservation of the bone volume for the future, avoiding aesthetic disturbances and more aggressive treatments in cases where other therapeutic alternatives are not feasible.

Perception of smile esthetics by laypeople of different ages.

PubMed

Sriphadungporn, Chompunuch; Chamnannidiadha, Niramol

2017-12-01

Age is a factor affecting smile esthetics. Three variables of smile esthetics associated with the maxillary anterior teeth and age-related changes have recently received considerable attention: (i) the incisal edge position of the maxillary central incisors, (ii) the maxillary gingival display, and (iii) the presence of a black triangle between the maxillary central incisors. The aim of this study was to evaluate the influence of age on smile esthetic perception based on these three variables in a group of Thai laypeople. The smiles were constructed from a photograph of a female smile. Smile photographs were altered in various increments using three variables: the incisal edge position of the maxillary incisors, gingival display, and a black triangle between the maxillary central incisors. The photographs were shown to a group of 240 Thai laypeople. The subjects were divided into two groups: a younger group, 15-29 years old (n = 120) and an older group, 36-52 years old (n = 120). Each subject was asked to score the attractiveness of each smile separately using a visual analog scale. Smile attractiveness scores concerning the incisal edge positions of the maxillary central incisors were similar between the two groups. However, upper lip coverage was rated as unattractive by the younger group. A gingival display of 0 and 2 mm was rated as most attractive by the younger group. Upper lip coverage and gingival display of 0 and 2 mm were considered attractive by the older group. Excessive gingival display (6 mm) was scored as unattractive by both groups. A black triangle ranging from 1 to 2.5 mm between the maxillary central incisors was scored differently between the two groups. The older group was more tolerant of the black triangle size. Age impacts smile perception based on maxillary gingival display and the presence of a black triangle between the maxillary central incisors, but not of the incisal edge position of the maxillary central incisors. Due to the variation in esthetic perception of each individual, participation between orthodontists and patients for decision-making and treatment planning is a crucial process to provide successful results.

Changes in anteroposterior position and inclination of the maxillary incisors after surgical-orthodontic treatment of skeletal class III malocclusions.

PubMed

Zou, Bingshuang; Zhou, Yang; Lowe, Alan A; Li, Huiqi; Pliska, Benjamin

2015-12-01

The purpose of this study was to evaluate and compare the anteroposterior (AP) position and inclination of the maxillary incisors in subjects with class I normal occlusion and a harmonious profile with patients with skeletal class III malocclusions, and to investigate the changes in maxillary incisor inclination and AP position after surgical-orthodontic treatment in class III patients. Sixty-five subjects (35 female and 30 male; mean age: 21.8 ± 3.89 years) with normal profiles and class I skeletal and dental patterns were selected as a control sample. Sixty-seven patients (38 female and 29 male; mean age: 21.3 ± 3.31 years) with skeletal and dental class III malocclusions who sought surgical-orthodontic treatment were used as the study sample. Subjects were asked to smile and profile photographs were taken with the head in a natural position and the maxillary central incisors and the forehead in full view; cephalograms were taken and superimposed on the profile pictures according to the outline of the forehead and nose. Forehead inclination, maxillary incisor facial inclination and the AP position of the maxillary central incisor relative to the forehead (FAFFA) were measured on the integrated images and statistical analyses were performed. In both groups, there were no significant male/female differences in either the maxillary central incisor inclination or AP position. Female subjects had a significantly steeper forehead inclination compared with males (P < 0.001) in both groups. After combined surgical-orthodontic treatment, the significant labial inclination (P < 0.001) and posterior positioning (P < 0.001) of the maxillary central incisors had been corrected to close to normal range (P > 0.05). In the control group, 84.6% had the facial axial point (FA) of their maxillary central incisors positioned between lines through the forehead facial axis (FFA) point and the glabella. In the study group, however, 79.1% had the maxillary central incisors positioned posterior to the line through the FFA point and the difference with the control group was statistically significant (P < 0.001). The position of the maxillary central incisors was strongly correlated with forehead inclination in the control sample (r(2) = 0.456; P < 0.01), but only a poor correlation was detected in the class III group (r(2) = 0.177; P > 0.05). With the integrated radiograph-photograph method, the lateral cephalogram was reoriented, which makes it possible to accurately measure the variables on profile photographs. The AP position and inclination of the maxillary central incisors relative to the forehead plays an important role in the esthetics of the profile during smiling and could be an important variable to be considered during diagnosis and treatment planning. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Elodontoma in captive southern red-backed voles (Myodes gapperi)

USGS Publications Warehouse

Rodriguez-Ramos Fernandez, Julia; Pinkerton, Marie E.; Heisey, Dennis M.; Drees, Randi; Schneider, Jay; Stickney, Lacey; Hofmeister, Erik K.; Sanchez-Migallon Guzman, David

2010-01-01

Five southern red-backed voles (Myodes gapperi) of the first generation of a wild-caught breeding colony were presented with lesions at the maxillary incisors consistent with elodontoma. The affected animals had a history of chronic weight loss, were >16 months of age, and were siblings. Radiographs of the head showed multiglobular to irregularly outlined mineral opacity masses at the apices of the maxillary incisors. On necropsy, maxillary incisor teeth were not grossly visible, and a gingival ulceration was observed at the expected site of eruption. Microscopically, the apical region of the maxillary incisors was thickened or replaced by irregular dental tissue masses consistent with elodontoma. This is the first report to describe elodontoma in red-backed voles.

A Rare Bilateral Presentation of Multiple Dens Invaginatus, Shovel-Shaped Incisor and Talon Cusp With Mesiodens.

PubMed

Hegde, S; Jain, M; Shubha, A B

2014-01-01

The aim of this paper is to describe a unique and unusual case of concomitant appearance of morphological dental anomalies in the maxillary anterior region, along with its management in a patient with no systemic abnormality. This case report describes the clinical and radiographic features of talon cusp, dens invaginatus, shovel-shaped incisors and a supernumerary tooth occurring in a single patient, which is a rare presentation. All 4 permanent maxillary incisors had dens invaginatus, the permanent maxillary canines showed the presence of talon cusps, the permanent maxillary central incisors were shovel-shaped and an erupted mesiodens was also observed. Treatment included restorative, surgical and orthodontic approaches.

Orthodontic management of a dilacerated central incisor and partially impacted canine with unilateral extraction - A case report.

PubMed

Felicita, A Sumathi

2017-10-01

To align a dilacerated maxillary central incisor and partially impacted canine with unilateral extraction in a young patient with skeletal deep bite. A 14 year old male patient reported to the hospital with skeletal deep bite (basal plane angle-17°), severe horizontal pattern of growth (Go-Gn to Sn -22°), upright maxillary incisors (U1 to NA -26°) and retroclined lower incisors (L1 to NB -11°). The maxillary left central incisor was dilacerated, and the maxillary left canine was partially impacted. Unilateral extraction of the left maxillary premolar and left mandibular central incisor was done. A canine disimpaction spring was used to align the impacted canine. An anterior bite plane was given to open the bite. Superimposition of lateral cephalogram (T1, T2) revealed bite opening, normal overjet and overbite. There was backward rotation of the mandible and increase in lower anterior facial height. There was no evidence of root resorption or loss of vitality in the dilacerated tooth. Clinically the canine was well aligned in the arch. Orthodontic management of a dilacerated incisor can be done without root resorption or loss of vitality. The partially impacted canine was well aligned in the arch. Unilateral extraction can produce good treatment results.

Dental Items of Interest: The Case of Delphic Sibyl by Michelangelo: Solitary Median Maxillary Central Incisor or Mesiodens.

PubMed

Perciaccante, Antonio; Coralli, Alessia

2015-01-01

A case of an anomaly in the maxillary dental arch on "Delphic Sibyl," a fresco by Michelangelo is reported. An accurate analysis of this fresco shows a single incisor tooth is present precisely in the midline. We hypothesize that it may be a case of solitary median maxillary central incisor (SMMCI) and discuss the differential diagnosis with another similar anomaly--the mesiodens.

Combined orthodontic-restorative management of maxillary central incisors lost following traumatic injury: a case report.

PubMed

Fleming, Padhraig S; Seehra, Jadbinder; Dibiase, Andrew T

2011-01-01

A history of traumatic dental injury to the maxillary central incisors during preadolescence or adolescence is common and may result in premature loss. Treatment options include prosthetic implant replacement, autotransplantation, and orthodontic space closure with direct composite recontouring. This case report describes the treatment of an adolescent girl who presented with a crowded Class I malocclusion complicated by a history of trauma to the maxillary central incisors. The treatment plan consisted of orthodontic space closure following loss of both maxillary central incisors and mandibular premolars. This case highlights that orthodontic space closure can be a valuable treatment option in selected Class I crowded and Class II uncrowded malocclusions, producing predictable and efficient results.

Multidisciplinary approach in the management of a complicated crown root fracture.

PubMed

Shin, J H; Kim, J E; Kim, R J

2013-06-01

This article describes the management of a complicated crown root fracture. A young patient presented with a crown root fracture of the maxillary left central incisor with an oblique subgingival fracture line. A multidisciplinary treatment approach including endodontic treatment, orthodontic extrusion, surgical extraction and intra-alveolar repositioning was used to gain sufficient crown length of the fractured maxillary incisor. The coronally repositioned maxillary left central incisor was stabilised by sutures and a resin wire splint. A resin core was built up followed by fabrication of an all-ceramic crown. Clinical and radiographic follow-up of the maxillary left central incisor after 24 months showed no signs of bone resorption or pathology and good aesthetics and functions were maintained.

Orthodontically induced eruption of a horizontally impacted maxillary central incisor.

PubMed

Rizzatto, Susana Maria Deon; de Menezes, Luciane Macedo; Allgayer, Susiane; Batista, Eraldo Luiz; Freitas, Maria Perpétua Mota; Loro, Raphael Carlos Drumond

2013-07-01

This case report presents the clinical features and periodontal findings in a patient with a horizontally impacted maxillary central incisor that had been exposed and aligned after a closed-eruption surgical technique. By combining 3 treatment stages-maxillary expansion, crown exposure surgery, and induced eruption-the horizontally impacted incisor was successfully moved into proper position. The patient finished treatment with a normal and stable occlusion between the maxillary and mandibular arches, and an adequate width of attached gingiva, even in the area surrounding the crown. The 5-year follow-up of stability and periodontal health demonstrated esthetic and functional outcomes after orthodontically induced tooth eruption. Clinical evaluation showed that the treated central incisor had periodontal clinical variables related to visible plaque, bleeding on probing, width of attached gingiva, and crown length that resembled the contralateral incisor. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Dental anomalies in an orthodontic patient population with maxillary lateral incisor agenesis.

PubMed

Citak, Mehmet; Cakici, Elif Bahar; Benkli, Yasin Atakan; Cakici, Fatih; Bektas, Bircan; Buyuk, Suleyman Kutalmış

2016-01-01

The purpose of this study was to evaluate the prevalence of dental anomalies in a subpopulation of orthodontic patients with agenesis of maxillary lateral incisors (MLI). The material of the present study included the records of the 1964 orthodontic patients. Panoramic radiographs and dental casts were used to analyze other associated eight dental anomalies, including agenesis of other teeth, dens invaginatus, dens evaginatus, peg shaped MLI, taurodontism, pulp stone, root dilaceration and maxillary canine impaction. Out of the 1964 patients examined, 90 were found to have agenesis of MLI, representing a prevalence of 4.6%. The most commonly found associated-anomalies were agenesis of other teeth (23.3%), peg-shaped MLIs (15.6%), taurodontism (42.2%), and dilacerated teeth (18.9%). Permanent tooth agenesis, taurodontism, peg-shaped maxillary lateral incisor, and root dilacerations are frequently associated with maxillary lateral incisor agenesis.

[Maxillary advancement osteotomy with sequelae cleft lip and palate: Dilemma between occlusion and aesthetic profile].

PubMed

Vigneron, A; Morand, B; Lafontaine, V; Lesne, V; Lesne, C; Bettega, G

2015-11-01

Maxillary hypoplasia is a common sequela of cleft lip and palate. Its surgical treatment consists in a maxillary advancement by distraction or by conventional orthognathic surgery but morphological results are unpredictable. Our goal in this study was to see if the esthetical results (on the lip and the nose) of maxillary advancement were correlated to the preservation of lateral incisor space of the cleft side. This retrospective study included 38 patients operated between 2002 and 2013. Unilateral clefts were studied independently from bilateral clefts. Profile aesthetics was evaluated independently and subjectively by two surgeons and scored on an 8-point scale. The result was classified as "good" if the score was superior or equal to 6. The score was correlated to the following parameters: amount of maxillary advancement, upper incisor axis, preservation of the missing lateral incisor space. In the "good result" group, the space of the lateral incisor was less often preserved. The nasolabial angle was more open and the upper central incisor axis more vertical. These results were more pronounced in bilateral clefts, but also found in unilateral clefts. Under reservation of the subjective evaluation and of the small number of patients, it seemed that lateral incisor space closure improved the profile of patients treated by maxillary advancement for cleft lip and palate sequelae. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

A clinical study to evaluate the correlation between maxillary central incisor tooth form and face form in an Indian population.

PubMed

Koralakunte, Pavankumar R; Budihal, Dhanyakumar H

2012-09-01

A study was performed to examine the correlation between maxillary central incisor tooth form and face form in males and females in an Indian population. The selection of prosthetic teeth for edentulous patients is a primary issue in denture esthetics, especially in the case of maxillary central incisors, which are the most prominent teeth in the arch. Two hundred dental students of Indian origin comprising 79 males and 121 females aged 18-28 years studying at Bapuji Dental College and Hospital were randomly selected as the study subjects. A standardized photographic procedure was used to obtain images of the face and the maxillary central incisors. The outline forms of the face and the maxillary right central incisor tooth were determined using a standardized method. The outline forms obtained were used to classify both face form and tooth form on the basis of visual and William's methods. The means were considered after evaluation by five prosthodontists, and the results were tabulated. Statistical analysis was performed using the chi-squared test for association and Z-test for equality of proportions. A correlation greater than 50% was observed between tooth form and face form by the visual method, compared with one of 31.5% by William's method. There was no highly defined correlation between maxillary central incisor tooth form and face form among the male and female Indian subjects studied.

Direct Resin Composite Restoration of Maxillary Central Incisors with Fractured Tooth Fragment Reattachment: Case Report.

PubMed

Szmidt, Monika; Górski, Maciej; Barczak, Katarzyna; Buczkowska-Radlińska, Jadwiga

This article presents a clinical protocol to reconstruct two accidentally damaged maxillary central incisors using composite resin material and a fractured tooth component. A patient was referred to the clinic with fracture of the two maxillary central incisors. Clinical examination revealed that both teeth were fractured in the middle third of the crown and that the fractures involved enamel and dentin with no pulp exposure. The patient had also suffered a lower lip laceration. When the lip was evaluated, a fractured fragment of the maxillary right central incisor was found inside the wound. The missing part of the tooth was replaced via adhesive attachment. Due to the damage of the fractured part of the maxillary left central incisor, direct composite restoration of this tooth was performed. With the advent of adhesive dentistry, the process of fragment reattachment has become simplified and more reliable. This procedure provides improved function, is faster to perform, and provides long-lasting effects, indicating that reattachment of a coronal fragment is a realistic alternative to placement of conventional resin composite restorations.

Severe incisor resorption by impacted maxillary canines: case report and literature review.

PubMed

Nute, S J

2004-11-01

This paper reviews the literature relating to incisor resorption caused by impacted maxillary canines, and describes the presentation and management of a patient with unusually severe early resorption. This case highlights the need for careful monitoring of maxillary canine eruption for all paediatric patients.

Analysis of the width ratio and wear rate of maxillary anterior teeth in the Korean population.

PubMed

Oh, Yeon-Ah; Yang, Hong-So; Park, Sang-Won; Lim, Hyun-Pil; Yun, Kwi-Dug; Park, Chan

2017-04-01

The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.

Prevalence, association, and sexual dimorphism of Carabelli's molar and shovel incisor traits amongst Jordanian population.

PubMed

Khraisat, A; Taha, Sahar T; Jung, R E; Hattar, S; Smadi, L; Al-Omari, I K; Jarbawi, M

2007-09-01

The correlation between dental morphological traits can be used as an indicator to show major ethnic differences. Therefore, this study investigated the prevalence of Carabelli's molar and shovel incisor traits and tested their association and sexual dimorphism in Jordanian population. Three hundred subjects of school children at their 10th grade and of 15.5-year as an average age were involved. Alginate impressions for the maxillary arch were taken, poured, and casts were then trimmed. The selected accurate casts were of 132 male- and 155 female-students. The examined morphologic traits were Carabelli's trait on the maxillary first and second molars and shovel-shaped incisors. The relationship between different traits was investigated by Nonparametric Correlation analysis and Independent Sample t test was used to test sexual dimorphism in trait expression. The prevalence of Carabelli's trait in maxillary first molar and shovel trait in maxillary central incisor was relatively high (65.0 % and 53.0 %, respectively). The prevalence of Carabelli's trait on maxillary second molars was 3.8 %. Nonparametric Correlations revealed a strongest positive correlation between Carabelli's trait on maxillary first molar and shovel trait in males (P = 0.005). Significant sexual dimorphism was only found in the prevalence of Carabelli's trait on maxillary first molar (P = 0.013) and shovel trait (P = 0.038). The Jordanian Population had comparatively high prevalence of Carabelli's molar and shovel incisor traits. There was a positive association between Carabelli's trait on maxillary first molar and shovel trait in males. Sexual dimorphism was evident in Carabelli's trait on maxillary first molar and shovel trait.

Does Andrews facial analysis predict esthetic sagittal maxillary position?

PubMed

Resnick, Cory M; Daniels, Kimberly M; Vlahos, Maryann

2018-04-01

Cephalometric analyses have limited utility in planning maxillary sagittal position for orthognathic surgery. In Six Elements of Orofacial Harmony, Andrews quantified maxillary position relative to forehead projection and angulation and proposed an ideal relationship. The purpose of this study was to investigate the ability of this technique to predict esthetic sagittal maxillary position. Survey study including a male and female with straight facial profiles, normal maxillary incisor angulations, and Angle's Class I. Maxillary position was modified on lateral photographs to create 5 images for each participant with incisor-goal anterior limit line (GALL) distances of -4, -2, 0, +2, and +4 mm. A series of health care professionals and laypeople were asked to rate each photo in order of attractiveness. A total of 100 complete responses were received. Incisor-GALL distances of +4 mm (41%) and +2 mm (40%) were most commonly considered "most esthetic" for the female volunteer (P < .001). For the male volunteer, there were 2 peak "most esthetic" responses: incisor-GALL distances of 0 mm (37%) and -4 mm (32%) (P < .001). Respondents considered maxillary incisor position 2 to 4 mm anterior to GALL most attractive in a woman and 0 to 4 mm posterior to GALL most esthetic in a man. Using these modified target distances, this analysis may be useful for orthognathic surgery planning. Copyright © 2018 Elsevier Inc. All rights reserved.

Orthodontic management of congenitally missing maxillary lateral incisors: a case report.

PubMed

Paduano, Sergio; Cioffi, Iacopo; Rongo, Roberto; Cupo, Antonello; Bucci, Rosaria; Valletta, Rosa

2014-01-01

This case report describes the orthodontic treatment of a woman, aged 15 years, with permanent dentition, brachyfacial typology, with congenitally missing maxillary lateral incisors. Multibracket straightwire fixed appliance was used to open the space for dental implant placement, and treat the impaired occlusion. The missing lateral incisors were substituted with oral implants.

Management of 2 teeth diagnosed with dens invaginatus with regenerative endodontics and apexification in the same patient: a case report and review.

PubMed

Kumar, Harleen; Al-Ali, Muna; Parashos, Peter; Manton, David J

2014-05-01

This review and case report present the treatment of a 10-year-old boy with both permanent maxillary lateral incisors demonstrating Oehlers type II dens invaginatus and pulpal involvement. Treatment was complicated by dental anxiety, supraventricular tachycardia, immature tooth development, and facial cellulitis. An infected necrotic pulp of the permanent maxillary left lateral incisor was treated by apexification and endodontic treatment with mineral trioxide aggregate. The necrotic pulp of the permanent maxillary right lateral incisor was treated with canal debridement and dressing under general anesthesia. Periapical healing of both teeth occurred, with the right lateral incisor showing continued root growth, thickening of the dentinal root walls, and completed apex formation. This tooth responded normally to pulp testing. Twenty-eight months after initial treatment, the right lateral incisor displayed progressive sclerosis of the canal. This case demonstrates possible pulpal regeneration of an infected maxillary right lateral incisor with dens invaginatus and an immature apex after minimal canal debridement. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Orthodontic treatment of severe anterior open bite and alveolar bone defect complicated by an ankylosed maxillary central incisor: a case report.

PubMed

Lin, Feiou; Sun, Hao; Yao, Linjie; Chen, Qiushuo; Ni, Zhenyu

2014-11-21

Incisor trauma is common in children, and can cause severe complications during adolescent growth and development. This report describes the treatment of a 16-year-old patient with severe anterior open bite due to ankylosis of the maxillary left incisor after dental trauma as an 8-year-old. No examination or active treatment was undertaken until he was 16 years old. Clinical examination revealed that the maxillary left incisor was severely intruded accompanied by a vertical alveolar bone defect. Orthodontic treatment combined with surgical luxation took 3 years and 7 months. During treatment, the intruded incisor was moved to the occlusal level and the alveolar bone defect was restored, achieving normal occlusion. After two years of retention, the maxillary left incisor was retained in a stable normal position with a slightly reduced overbite. This case demonstrates that surgical luxation with orthodontic traction can be an effective approach, especially when the ankylosed tooth has a single root. Long-term monitoring of orthodontic stability and the maintenance of periodontal health are crucial in the post-treatment period.

Apical root resorption of incisors after orthodontic treatment of impacted maxillary canines: a radiographic study.

PubMed

Brusveen, Elin Marie Gravdal; Brudvik, Pongsri; Bøe, Olav Egil; Mavragani, Maria

2012-04-01

The purpose of the study was to evaluate impacted maxillary canines as risk factor for orthodontic apical root resorption. The sample comprised 66 patients treated with fixed appliances. Thirty-two patients with a unilateral impacted maxillary canine, which was distanced from the roots of the incisors at a preliminary phase of treatment before bonding, formed the impaction group, and 34 patients without impactions served as the controls. Root shortening was calculated by using pretreatment and posttreatment intraoral radiographs. Inclination of the eruption path of the impacted canine relative to the midline, axis of the lateral incisor, and nasal line, root development, and the medial and vertical positions of the impacted tooth were recorded on orthopantomograms and lateral cephalometric films. The follicle/tooth ratio was evaluated by using periapical radiographs. No significant difference in apical resorption of the maxillary incisors was detected between the impaction and control groups, or between the incisors of the impacted and contralateral sides in the same subject. Likewise, no difference in the severity of root resorption was found between the incisors of impacted side alone and the incisors of the control group. Mesial and vertical inclinations of the impacted canines were negatively related to a lateral incisor's root resorption. No correlations were found between resorption and medial or vertical position of the crown of the canine. The follicle/tooth ratio was significantly related to the mesial inclination of the impacted canine, but not to root resorption. An impacted maxillary canine, after being distanced from the incisor roots, does not seem to be a risk factor for apical root resorption during orthodontic treatment. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Orthodontic Management of Congenitally Missing Maxillary Lateral Incisors: A Case Report

PubMed Central

Rongo, Roberto; Cupo, Antonello; Valletta, Rosa

2014-01-01

This case report describes the orthodontic treatment of a woman, aged 15 years, with permanent dentition, brachyfacial typology, with congenitally missing maxillary lateral incisors. Multibracket straightwire fixed appliance was used to open the space for dental implant placement, and treat the impaired occlusion. The missing lateral incisors were substituted with oral implants. PMID:24711929

Spectral analysis of /s/ sound with changing angulation of the maxillary central incisors.

PubMed

Runte, Christoph; Tawana, Djafar; Dirksen, Dieter; Runte, Bettina; Lamprecht-Dinnesen, Antoinette; Bollmann, Friedhelm; Seifert, Eberhard; Danesh, Gholamreza

2002-01-01

The aim of the study was to measure the influence of the maxillary central incisors free from adaptation phenomena using spectral analysis. The maxillary dentures of 18 subjects were duplicated. The central incisors were fixed in a pivoting appliance so that their position could be changed from labial to palatal direction. A mechanical push/pull cable enabled the incisor section to be handled extraorally. Connected to the control was a sound generator producing a sinus wave whose frequency was related to the central incisor angulation. This acoustic signal was recorded on one channel of a digital tape recorder. After calibration of the unit, the denture duplicate was inserted into the subject's mouth, and the signal of the /s/ sounds subsequently produced by the subject was recorded on the second channel during alteration of the inclination angle simultaneously with the generator signal. Spectral analysis was performed using a Kay Speech-Lab 4300B. Labial displacement in particular produced significant changes in spectral characteristics, with the lower boundary frequency of the /s/ sound being raised and the upper boundary frequency being reduced. Maxillary incisor position influences /s/ sound production. Displacement of the maxillary incisors must be considered a cause of immediate changes in /s/ sound distortion. Therefore, denture teeth should be placed in the original tooth position as accurately as possible. Our results also indicate that neuromuscular reactions are more important for initial speech sound distortions than are aerodynamic changes in the anterior speech sound-producing areas.

Inner canthal distance and golden proportion as predictors of maxillary central incisor width in south Indian population.

PubMed

George, Shibu; Bhat, Vinaya

2010-01-01

Even though the constant relation of golden proportion and inner canthal distance (ICD) with the width of the maxillary central incisor (CIW) has been found in European population, it may not be applied to Indian population as we differ from Europeans racially and genetically. Hence, this study was carried out with the objectives of determining if these parameters are applicable to our population also. Three hundred south Indian subjects between 18 and 26 years of age, free from facial and dental deformities were examined. Inner canthus of each eye was used as soft tissue landmark. The maxillary central incisors were measured at the contact point area with the help of digital vernier caliper. The CIW was also calculated using golden proportion ratio to obtain the calculated central incisor width. A comparison was made with measured width. Statistical analyses were done to identify any significant difference using "Z" tests. Pearson's Correlation Coefficient test was used to evaluate the measured and the calculated width of the central incisor. ICD and the width of two maxillary incisors were in golden proportion in south Indian population. Also, ICD when multiplied by a decreasing function value of the golden proportion and divided by 2 is a reliable predictor of determining CIW. As in the European population, the ICD and the golden proportion are reliable predictors for determining the width of the maxillary central incisors in the south Indian population also.

Radiographic localization of unerupted teeth: further findings about the vertical tube shift method and other localization techniques.

PubMed

Jacobs, S G

2000-10-01

The parallax method (image/tube shift method, Clark's rule, Richards' buccal object rule) is recommended to localize unerupted teeth. Richards' contribution to the development of the parallax method is discussed. The favored method for localization uses a rotational panoramic radiograph in combination with an occlusal radiograph involving a vertical shift of the x-ray tube. The use of this combination when localizing teeth and supernumeraries in the premolar region is illustrated. When taking an occlusal radiograph to localize an unerupted maxillary canine, clinical situations are presented where modification of the vertical angulation of the tube of 70 degrees to 75 degrees or of the horizontal position of the tube is warranted. The limitations of axial (true, cross-sectional, vertex) occlusal radiographs are also explored.

A rare occurrence of supplementary maxillary lateral incisors and a detailed review on supernumerary teeth

PubMed Central

Chalakkal, Paul; Krishnan, Ramesh; De Souza, Neil; Da Costa, Godwin Clovis

2018-01-01

This article highlights a rare occurrence of nonsyndromic supplemental maxillary lateral incisors in a 11-year-old boy. It also includes a detailed literature review of supernumerary teeth. PMID:29731581

Dens invaginatus with necrotic pulp in a right maxillary lateral incisor with preserved vitality.

PubMed

Alessandro, Lanza; Fabrizio, Di Francesco; Gennaro, De Marco; Dario, Di Stasio; Eugenio, Guidetti; Letizia, Perillo; Luigi, Femiano; Felice, Femiano

2018-01-01

Dens invaginatus (DI) is a dental malformation occurring in several morphologic types. Consequently, treatment of teeth affected by DI can get complicated because of the complex root canal anatomy. The aim is to describe how to manage a rare report of a DI with necrotic pulp held within the vital pulp of a maxillary lateral incisor. Oral fistula was found on the buccal mucosa of the apex of the vital maxillary lateral incisor with a DI having necrotic pulp. Endodontic treatment of the maxillary lateral incisor and of the tract canal of DI was realized. Clinical disappearance of oral sinus tract was observed after 10 days. On the contrary, the disappearance of radiolucent area occurred after 6 months. A proper and prompt diagnosis is necessary to carry out effective prevention protocols or prevent consequences generating nonrecoverable endo-perio diseases.

Comparison of the effect of labiolingual inclination and anteroposterior position of maxillary incisors on esthetic profile in three different facial patterns

PubMed Central

Chirivella, Praveen; Singaraju, Gowri Sankar; Mandava, Prasad; Reddy, V Karunakar; Neravati, Jeevan Kumar; George, Suja Ani

2017-01-01

Objective: To test the null hypothesis that there is no effect of esthetic perception of smiling profile in three different facial types by a change in the maxillary incisor inclination and position. Materials and Methods: A smiling profile photograph with Class I skeletal and dental pattern, normal profile were taken in each of the three facial types dolichofacial, mesofacial, and brachyfacial. Based on the original digital image, 15 smiling profiles in each of the facial types were created using the FACAD software by altering the labiolingual inclination and anteroposterior position of the maxillary incisors. These photographs were rated on a visual analog scale by three panels of examiners consisting of orthodontists, dentists, and nonprofessionals with twenty members in each group. The responses were assessed by analysis of variance (ANOVA) test followed by post hoc Scheffe. Results: Significant differences (P < 0.001) were detected when ratings of each photograph in each of the individual facial type was compared. In dolichofacial and mesofacial pattern, the position of the maxillary incisor must be limited to 2 mm from the goal anterior limit line. In brachyfacial pattern, any movement of facial axis point of maxillary incisors away from GALL is worsens the facial esthetics. The result of the ANOVA showed differences among the three groups for certain facial profiles. Conclusion: The hypothesis was rejected. The esthetic perception of labiolingual inclination and anteroposterior of maxillary incisors differ in different facial types, and this may effect in formulating treatment plans for different facial types. PMID:28197396

Asymmetric extractions in a patient with a hopeless maxillary central incisor, followed by treatment with mini-implant anchorage.

PubMed

Jung, Min-Ho

2018-05-01

Premolar extraction is 1 option for treatment of patients with malocclusion and severe crowding or protrusion. When the patient has missing or hopeless teeth other than premolars, it is possible to consider removal of those teeth to use the space to decrease crowding. A 15-year-old girl sought treatment for severe crowding. She had already lost her maxillary right first premolar as a result of caries 1 year previously and had a hopeless maxillary right central incisor. Her mandibular left first molar still caused discomfort even after endodontic treatment. Extractions of the maxillary right central incisor and mandibular right first premolar and left first molar were chosen to resolve the occlusion problems. Orthodontic mini-implants were placed to translocate the maxillary left central incisor across the midpalatal suture to use the space in the maxillary right quadrant to relieve the crowding. Although a different extraction option was used in each quadrant, the final occlusion was acceptable. After debonding, porcelain crowns were placed on the anterior teeth to improve esthetics. The treatment result remained stable after 2 years of retention. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

[The supportive outcome of periodontal non-surgical therapy to severe chronic periodontitis accompanied with malformed lingual groove in lateral incisor for 6 years: a case report].

PubMed

Li, Zheng; Kang, Jun

2011-06-01

To track the initiating and developing process of one case diagnosed as chronic periodontitis accompanied with malformed lingual groove in maxillary lateral incisor and report the long-term prognosis to the periodontal conservative and supportive therapy. The patient was diagnosed with mild chronic periodontitis 6 years ago and accepted routine periodontal scaling and root planning (SRP) plus supportive periodontal therapy (SPT) one time. Two years later the periodontal condition deteriorated by deep pockets in molars and severe bone destruction around the maxillary lateral incisor with malformed lingual groove. After SRP in sites which pocket depth more than 4mm plus root canal therapy and lingual groove plasty of maxillary right lateral incisor, the SPT regularly proceeded at 3rd, 6th and 12th month. At present the whole periodontal tissue was healthy, the bone lesion around maxillary lateral incisor recovered well, the tooth had no mobile, the cosmetic effect andtooth function was in good state, and the patient was very satisfied.

Orthodontic movement of a maxillary incisor through the midpalatal suture: a case report.

PubMed

Garib, Daniela Gamba; Janson, Guilherme; dos Santos, Patrícia Bittencourt Dutra; de Oliveira Baldo, Taiana; de Oliveira, Gabriela Ulian; Ishikiriama, Sérgio Kiyoshi

2012-03-01

Orthodontic space closure is a treatment alternative when a maxillary central incisor is missing. The objective of this report was to present an unusual treatment in which a right maxillary central incisor was moved through the midpalatal suture to replace the absent contralateral tooth. The biologic aspects and clinical appearance of the recontoured lateral and central incisors were analyzed. The position of the examined teeth and the appearance of the surrounding soft tissues were satisfactory; however, the upper midline frenulum deviated to the left. The incisor was successfully moved with no obvious detrimental effects as observed on the final radiographs. In the radiographic and tomographic examinations, the midline suture seemed to have followed the tooth movement. The patient expressed satisfaction with the results. It was concluded that orthodontic movement of the central incisor to replace a missing contralateral tooth is a valid treatment option, and the achievement of an esthetic result requires an interdisciplinary approach, including restorative dentistry and periodontics.

Multiple supernumerary teeth associated with an impacted maxillary central incisor: Surgical and orthodontic management

PubMed Central

Yeluri, Ramakrishna; Hegde, Manjunath; Baliga, Sudhindra; Munshi, Autar Krishen

2012-01-01

Various anomalies in the size, shape, number, structure and eruption of the teeth are often observed clinical conditions. Supernumerary teeth can be found in almost any region of the dental arch, and most of the times they are asymptomatic, and are routinely found during radiographic evaluation. The most common cause of impacted maxillary incisors is the presence of the supernumerary teeth. This paper describes a case of multiple supernumerary teeth associated with an impacted permanent maxillary central incisor in an 11-year old child along with its surgical and orthodontic management. PMID:22919229

Cone-beam computed tomography-based diagnosis and treatment simulation for a patient with a protrusive profile and a gummy smile

PubMed Central

Imamura, Toshihiro; Kokai, Satoshi; Ono, Takashi

2018-01-01

For patients with bimaxillary protrusion, significant retraction and intrusion of the anterior teeth are sometimes essential to improve the facial profile. However, severe root resorption of the maxillary incisors occasionally occurs after treatment because of various factors. For instance, it has been reported that approximation or invasion of the incisive canal by the anterior tooth roots during retraction may cause apical root damage. Thus, determination of the position of the maxillary incisors is key for orthodontic diagnosis and treatment planning in such cases. Cone-beam computed tomography (CBCT) may be useful for simulating the post-treatment position of the maxillary incisors and surrounding structures in order to ensure safe teeth movement. Here, we present a case of Class II malocclusion with bimaxillary protrusion, wherein apical root damage due to treatment was minimized by pretreatment evaluation of the anatomical structures and simulation of the maxillary central incisor movement using CBCT. Considerable retraction and intrusion of the maxillary incisors, which resulted in a significant improvement in the facial profile and smile, were achieved without severe root resorption. Our findings suggest that CBCT-based diagnosis and treatment simulation may facilitate safe and dynamic orthodontic tooth movement, particularly in patients requiring maximum anterior tooth retraction. PMID:29732305

To evaluate the validity of Recurring Esthetic Dental proportion in natural dentition

PubMed Central

Shetty, Shilpa; Pitti, Varun; Satish Babu, CL; Surendra Kumar, GP; Jnanadev, KR

2011-01-01

Background: Different proportions are described in the literature for smile designing, such as Golden proportion, Golden percentage, Preston's proportion, and recently, Recurring Esthetic Dental (RED) proportion. Aims and Objectives: To evaluate the existence of RED proportion in natural dentition. To determine the relative height of maxillary lateral incisor and canine occurring in natural dentition so that it can be used in any of the above proportions. Materials and Methods: Fifteen male subjects and 15 female subjects in each of the different age groups of 18–23 years, 24–29 years and 30–35 years were selected for this study (total 90). Photographs of the subjects were taken using Nikon D200 camera with 135 mm lens and analyzed using Adobe Photoshop CS4 extended software. The height and width of maxillary central incisors, lateral incisors and canines were found out using the measuring tool provided in the software. Results: Average width ratio and height ratio of maxillary lateral incisor to central incisor and maxillary canine to lateral incisor were calculated to check the existence of RED proportion in natural dentition. Average lateral incisor to central incisor height ratio for “small”- and “medium”-sized teeth was found to be 88% and for “tall”-sized teeth was found to be 84%. Average canine to lateral incisor height ratio for “small”- and “medium”-sized teeth was found to be 106% and for “tall”-sized teeth was found to be 105%. Conclusions: Within the limitations of the study, RED proportion was not seen in natural dentition. PMID:22025841

Differences between dentitions with palatally and labially located maxillary canines observed in incisor width, dental morphology and space conditions.

PubMed

Artmann, L; Larsen, H J; Sørensen, H B; Christensen, I J; Kjaer, I

2010-06-01

To analyze the interrelationship between incisor width, deviations in the dentition and available space in the dental arch in palatally and labially located maxillary ectopic canine cases. Size: On dental casts from 69 patients (mean age 13 years 6 months) the mesiodistal widths of each premolar, canine and incisor were measured and compared with normal standards. Dental deviations: Based on panoramic radiographs from the same patients the dentitions were grouped accordingly: Group I: normal morphology; Group IIa: deviations in the dentition within the maxillary incisors only; Group IIb: deviations in the dentition in general. Descriptive statistics for the tooth sizes and dental deviations were presented by the mean and 95% confidence limits for the mean and the p-value for the T-statistic. Space: Space was expresses by subtracting the total tooth sizes of incisors, canines and premolars from the length of the arch segments. Size of lateral maxillary incisor: The widths of the lateral incisors were significantly different in groups I, IIa and IIb (p=0.016) and in cases with labially located ectopic canines on average 0.65 (95% CI:0.25-1.05, p=0.0019) broader than lateral incisors in cases with palatally located ectopic canines. Space: Least available space was observed in cases with labially located canines. The linear model did show a difference between palatally and labially located ectopic canines (p=0.03). Space related to deviations in the dentition: When space in the dental arch was related to dental deviations (groups I, IIa and IIb), the cases in group IIb with palatally located canines had significantly more space compared with I and IIa. Two subgroups of palatally located ectopic maxillary canine cases based on registration of space, incisor width and deviations in the morphology of the dentition were identified.

Severe root resorption resulting from orthodontic treatment: Prevalence and risk factors

PubMed Central

Maués, Caroline Pelagio Raick; do Nascimento, Rizomar Ramos; Vilella, Oswaldo de Vasconcellos

2015-01-01

OBJECTIVE: To assess the prevalence of severe external root resorption and its potential risk factors resulting from orthodontic treatment. METHODS: A randomly selected sample was used. It comprised conventional periapical radiographs taken in the same radiology center for maxillary and mandibular incisors before and after active orthodontic treatment of 129 patients, males and females, treated by means of the Standard Edgewise technique. Two examiners measured and defined root resorption according to the index proposed by Levander et al. The degree of external apical root resorption was registered defining resorption in four degrees of severity. To assess intra and inter-rater reproducibility, kappa coefficient was used. Chi-square test was used to assess the relationship between the amount of root resorption and patient's sex, dental arch (maxillary or mandibular), treatment with or without extractions, treatment duration, root apex stage (open or closed), root shape, as well as overjet and overbite at treatment onset. RESULTS: Maxillary central incisors had the highest percentage of severe root resorption, followed by maxillary lateral incisors and mandibular lateral incisors. Out of 959 teeth, 28 (2.9%) presented severe root resorption. The following risk factors were observed: anterior maxillary teeth, overjet greater than or equal to 5 mm at treatment onset, treatment with extractions, prolonged therapy, and degree of apex formation at treatment onset. CONCLUSION: This study showed that care must be taken in orthodontic treatment involving extractions, great retraction of maxillary incisors, prolonged therapy, and/or completely formed apex at orthodontic treatment onset. PMID:25741825

Severe root resorption resulting from orthodontic treatment: prevalence and risk factors.

PubMed

Maués, Caroline Pelagio Raick; do Nascimento, Rizomar Ramos; Vilella, Oswaldo de Vasconcellos

2015-01-01

To assess the prevalence of severe external root resorption and its potential risk factors resulting from orthodontic treatment. A randomly selected sample was used. It comprised conventional periapical radiographs taken in the same radiology center for maxillary and mandibular incisors before and after active orthodontic treatment of 129 patients, males and females, treated by means of the Standard Edgewise technique. Two examiners measured and defined root resorption according to the index proposed by Levander et al. The degree of external apical root resorption was registered defining resorption in four degrees of severity. To assess intra and inter-rater reproducibility, kappa coefficient was used. Chi-square test was used to assess the relationship between the amount of root resorption and patient's sex, dental arch (maxillary or mandibular), treatment with or without extractions, treatment duration, root apex stage (open or closed), root shape, as well as overjet and overbite at treatment onset. Maxillary central incisors had the highest percentage of severe root resorption, followed by maxillary lateral incisors and mandibular lateral incisors. Out of 959 teeth, 28 (2.9%) presented severe root resorption. The following risk factors were observed: anterior maxillary teeth, overjet greater than or equal to 5 mm at treatment onset, treatment with extractions, prolonged therapy, and degree of apex formation at treatment onset. This study showed that care must be taken in orthodontic treatment involving extractions, great retraction of maxillary incisors, prolonged therapy, and/or completely formed apex at orthodontic treatment onset.

Apical root resorption in maxillary incisors when employing micro-implant and J-hook headgear anchorage: a 4-month radiographic study.

PubMed

Wang, Qingzhu; Chen, Wenjing; Smales, Roger J; Peng, Hui; Hu, Xiaokun; Yin, Lu

2012-10-01

This study evaluated, over a 4-month study period, the amount of apical root resorption occurring in maxillary central incisors following their retraction when employing either micro-implant or J-hook headgear anchorage. The prospective randomised clinical trial was conducted in Orthodontic Clinic, College of Stomatology, China from 2008-2009. Subjects are patients requiring fixed appliances on waiting list (n=20). In female Han Chinese patients aged from 16-26 years, standardized periapical radiographs from 10 randomly assigned patients with maxillary protrusions comprising the micro-implant group, and from 10 similar patients comprising the J-hook headgear group, were assessed for maxillary central incisor apical root resorption. Measurements before and after orthodontic therapy were also obtained from lateral cephalometric radiographs to calculate incisor horizontal retraction and vertical intrusion distances. Estimated retraction force vectors were calculated in horizontal and vertical directions for both treatment groups. Data analysis employed t-tests and the Pearson correlation test, with α=0.05 for statistical significance. The results showed that when compared with the J-hook group, significantly more apical root resorption shortening of the maxillary central incisors was observed in the micro-implant group (1.27 mm difference, 95% CI=0.70-1.84, P<0.001), which was associated with a significantly larger retraction distance (P=0.004) and a smaller vertical force component (P<0.0001). We are led to conclude that continuous activation of the nickel-titanium coil springs used in the micro-implant group resulted in significantly more apical root resorption shortening and maxillary central incisor retraction than when intermittent J-hook retraction was employed. The employment of continuous duration orthodontic forces presents a risk for increased apical root resorption that requires careful radiographic monitoring.

Multidisciplinary Restoration of Traumatized and Displaced Maxillary Central Incisor by Bent Wire System-A Novel Approach.

PubMed

Sasalawad, Shilpa S; Jogani, Vivek; Pai, Suryakanth M; Chour, Rashmi C; Balehosur, Deepti V

2016-11-01

Management of traumatic injuries to teeth is a challenge to dental practice, as it occurs when dentists are least prepared for it. The direction and the force of the object or the fall significantly affects the diagnosis, treatment plan and therefore the outcome of the treatment. These traumatic injuries may present with different clinical situations which demand immediate attention and assessment by the clinician. The maxillary central incisor crown fractures are the most common variant of trauma, because of the anterior and protrusive positioning. This case report describes the novel method to produce expansion of the dental arches to correct the post-traumatic displacement of the central incisor along with aesthetic and functional rehabilitation of Ellis Class IV fracture of permanent maxillary central incisor.

Rehabilitation of the dominance of maxillary central incisors with refractory porcelain veneers requiring minimal tooth preparation.

PubMed

da Cunha, Leonardo Fernandes; Gonzaga, Carla Castiglia; Saab, Rafaella; Mushashe, Amanda Mahammad; Correr, Gisele Maria

2015-01-01

Central dominance is an important element of an esthetic smile. Color, form, and size have been suggested as tools for assessing the dominance of maxillary teeth. A spectrophotometer can be used to determine the value, hue, and chroma. Correct sizing of restorations according to the central incisor dominance principle improves not only esthetics but also aspects of occlusion, such as anterior guidance. Refractory porcelain systems can effectively restore the color, shape, emergence profile, and incisal translucency. This report illustrates the esthetic and occlusal rehabilitation of the dominance of maxillary central incisors using fabricated minimal thickness refractory porcelain veneers.

Bilateral presence of two root canals in maxillary central incisors: A rare case study.

PubMed

Kavitha, M; Gokul, Kannan; Ramaprabha, B; Lakshmi, Amudha

2014-04-01

Success in root canal treatment is achieved after thorough cleaning and shaping followed by complete obturation of the canal system. Therefore, endodontic therapy requires specific and complete knowledge of the internal and external dental anatomy, and its variations in presentation. The internal anatomy of the maxillary central incisor is well-known and usually presents one root canal system. This case report describes an endodontic treatment of traumatized both maxillary central incisors with two canal systems. Knowledge of dental anatomy is fundamental for proper endodontic practice. When root canal treatment is performed, the clinician should be aware that both external and internal anatomy may be abnormal.

Characteristics of Teeth: A Review of Size, Shape, Composition, and Appearance of Maxillary Anterior Teeth.

PubMed

McGowan, Steve

2016-03-01

Although digital technologies play an increasingly integral role in dentistry, there remains a need for dental professionals to understand the fundamentals of tooth anatomy, form, occlusion, and color science. In this article, the size, shape, composition, and appearance of maxillary anterior teeth will be discussed from esthetic and functional perspectives. A total of 600 extracted maxillary incisors were studied: 200 each of central incisors, lateral incisors, and cuspids. The purpose of the article is to exhibit and discuss factors that make teeth unique and diverse. Understanding these aspects of teeth aids dental professionals in more effectively creating realistic and highly esthetic restorations for patients.

Width/Length Ratio in Maxillary Anterior Teeth. Comparative Study of Esthetic Preferences among Professionals and Laypersons.

PubMed

Álvarez-Álvarez, Lorena; Orozco-Varo, Ana; Arroyo-Cruz, Gema; Jiménez-Castellanos, Emilio

2017-05-17

Many studies have examined the esthetic preferences of professionals in the maxillary anterior region; however, only a few have taken into account the ratios that are more frequent within the population or other ratios suggested in the literature as ideal. Previous studies also failed to compare them with the esthetic preferences of the lay population with regards to the smile. The purpose of this study is to highlight the differences when perceiving the esthetics of smiles between general dentists and laypersons, and linking them with the width/length of the maxillary anterior teeth. Photographs of the full face of a female subject were modified with Photoshop CS regarding the length/width relationships of the 6 maxillary anterior teeth. The three modifications made were: (a) 80% length/width, (b) 85%, length/width, and (c) 85% length/width in central incisors, 80% length/width in lateral incisors and canines. Three sequences of photograph pairs were created with different ratios and presented in PowerPoint to a sample of 100 general dentists and 100 laypersons. The ratio considered as the most esthetic by the majority of the judges was 85% for central incisors and 80% for lateral incisors and canines, with a statistically significant difference (p < 0.01). There was no statistically significant difference in the esthetic preferences of the studied populations either due to gender or professional experience of the dentists (p > 0.01). According to the results obtained in this study, professionals and laypersons considered a width/length ratio of 85% for maxillary central incisors and 80% for lateral incisors and canines as the most esthetic for maxillary anterior teeth. These results do not support findings from other studies previously published with similar ratios in central incisors, lateral incisors, and canines. Today clinicians practice in a treatment environment where not only function and utility but also esthetics is demanded in almost every procedure. Restoring/maintaining function is considered essential in any restorative dentistry treatment, but the esthetic aspects of any treatment should never be forgotten. This study was motivated by the increasing importance of obtaining a better appreciation of the perception of smile beauty, and of the role of maxillary teeth width/length ratio on the perception of dental esthetics. © 2017 by the American College of Prosthodontists.

Partially arrested root formation in a permanent maxillary central incisor subsequent to trauma to the primary dentition.

PubMed

Nagatani, S; Mathieu, G P

1994-02-01

When the primary dentition sustains a traumatic insult, the development of the succedaneous teeth can be disturbed leading to a number of malformations. In this case report, the patient presented with a history of prior trauma to his primary maxillary incisors which resulted in partially arrested root formation for a permanent incisor. The considerations in formulating a treatment plan which included orthodontics are discussed.

Do different vertical positions of maxillary central incisors influence smile esthetics perception?

PubMed

Menezes, Erica Bretas Cabral; Bittencourt, Marcos Alan Vieira; Machado, Andre Wilson

2017-01-01

The purpose of this study was to determine the perception of smile esthetics among orthodontists and layperson, with respect to different maxillary central incisors vertical positions in full-face and close-up smile analyses. Frontal photographs of the smiles of two adult women were used. Images were altered to create a symmetrical image with the gingival margin levels of the maxillary canines matching the central incisors and a 1.0-mm central-to-lateral incisal step. Later, the images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. The images were randomly assembled in an album, which was given to 114 judges, 57 orthodontists and 57 laypersons, who were asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were statistically analyzed by means of 1-way analysis of variance with the Tukey post-hoc test and the Student t test. The highest rated smiles showed two notable characteristics: a) the central incisor gingival margins matched or were 0.5 mm below the line of the canine gingival margins and; b) the central-to-lateral incisal step was 1.0 to 1.5 mm. The worst smiles showed two notable characteristics: a) the central incisor gingival margins were 1.0 mm above or 1.5 mm below the canine gingival margins and; b) no step between the centrals and laterals or a 2.5-mm step. The vertical position of the maxillary central incisors significantly affected the perception of the smile esthetics, whereas slightly extruded central incisors were more esthetically preferred than intruded.

Orthodontic management of bilateral maxillary canine-first premolar transposition and bilateral agenesis of maxillary lateral incisors: a case report.

PubMed

Di Palma, Elena; Di Giuseppe, Biagio; Tepedino, Michele; Chimenti, Claudio

2015-01-01

Maxillary canine-first premolar transposition (Mx.C.P1) is an uncommon dental positional anomaly that may create many orthodontic problems from both esthetic and functional points of view. In this report we show the orthodontic management of a case of Mx.C.P1 associated with bilateral maxillary lateral incisor agenesis and unilateral mandibular second premolar agenesis The patient was treated with a multibracket appliance and the extraction of the lower premolar. treatment was completed without the need for any prosthetic replacement.

Effect of Crown Angulation of Maxillary Incisor on Effective Arch Perimeter.

PubMed

Jain, Megha; Vyas, Matrishva; Singh, Johar Rajvinder

2017-06-01

It has been postulated that crown angulation and inclination has potential space implication within the arch. With the insight of space implication of the axial relations of teeth, cases of genuine tooth size discrepancies can be dealt with improved stability. This in vitro study was designed to investigate and quantify the influence of angulation and inclination of maxillary incisors on the effective arch perimeter. Acrylic teeth were arranged over typhodont frame with spaced maxillary anterior segment. Known value of tip and torque in increments were incorporated to maxillary incisors through bracket positioning and corresponding consumption of the interdental spaces were measured using coordinate measuring machine. Study revealed that increase in maxillary incisor crown angulation by 1o results in consumption of approximately 0.012 mm of arch perimeter. Similarly, there is a consumption of 0.021 mm of arch perimeter with each degree increase in labial crown inclination. The knowledge of the space implication can be included in the space analysis during the orthodontic treatment planning. Depending upon the amount of space discrepancy, an accurate degree of required alteration in the axial relation of one or more teeth can be planned.

Effect of Crown Angulation of Maxillary Incisor on Effective Arch Perimeter

PubMed Central

Vyas, Matrishva; Singh, Johar Rajvinder

2017-01-01

Introduction It has been postulated that crown angulation and inclination has potential space implication within the arch. With the insight of space implication of the axial relations of teeth, cases of genuine tooth size discrepancies can be dealt with improved stability. Aim This in vitro study was designed to investigate and quantify the influence of angulation and inclination of maxillary incisors on the effective arch perimeter. Materials and Methods Acrylic teeth were arranged over typhodont frame with spaced maxillary anterior segment. Known value of tip and torque in increments were incorporated to maxillary incisors through bracket positioning and corresponding consumption of the interdental spaces were measured using coordinate measuring machine. Results Study revealed that increase in maxillary incisor crown angulation by 1o results in consumption of approximately 0.012 mm of arch perimeter. Similarly, there is a consumption of 0.021 mm of arch perimeter with each degree increase in labial crown inclination. Conclusion The knowledge of the space implication can be included in the space analysis during the orthodontic treatment planning. Depending upon the amount of space discrepancy, an accurate degree of required alteration in the axial relation of one or more teeth can be planned. PMID:28764302

Comparison of intrusion effects on maxillary incisors among mini implant anchorage, j-hook headgear and utility arch.

PubMed

Jain, Ravindra Kumar; Kumar, Sridhar Prem; Manjula, W S

2014-07-01

Intrusion of maxillary incisors is one of the most important and difficult tooth movements to achieve as a part of orthodontic therapy. A variety of techniques were used in the past to intrude the maxillary incisors before the emergence of mini implants in Orthodontics. Mini implants are temporary anchorage devices used to produce various tooth movements. The research was carried out to evaluate and compare the efficiency of producing intrusion of maxillary incisors using mini implants, utility arch and j- hook headgear. The study was conducted on 30 subjects divided into 3 Groups equally. Group 1- mini implant anchorage, Group 2 - j- hooks headgear and Group 3- utility arch were used for intrusion of the maxillary incisors. Conventional lateral cephalograms were taken before treatment and at the end of intrusion. Five cephalometric parameters were used to measure the amount of intrusion attained in each Group. Intra Group comparisons were done using student t-test and inter Group comparisons were done using ANOVA The duration of intrusion was four months in all the three Groups. In Group 1 the mean average intrusion attained was 2.1 mm, the mean average intrusion attained in Group 2 was 0.7 mm, and the mean average intrusion achieved in Group 3 was 1.4 mm with a side effect of 0.75 mm of molar extrusion. Although, both mini implants and utility arch can be used to attain significant amounts of incisor intrusion but using mini implants will produce true intrusion without any other side effects.

Conservative treatment of a cervical horizontal root fracture and a complicated crown fracture: a case report.

PubMed

Belobrov, I; Weis, M V; Parashos, P

2008-09-01

Abstract This case report describes successful long-term conservative management of a cervical root fracture and a complicated crown fracture of the maxillary central incisors in a 12-year-old patient. A mineral trioxide aggregate partial pulpotomy was performed on the maxillary right central incisor, while the maxillary left central incisor was splinted to the neighbouring lateral incisor using an acid-etch technique. Both teeth remained asymptomatic throughout the 3.5 years of a review period, with the cervical root fracture having mostly healed with the formation of a calcified tissue between the fragments. Two different treatment methods were used for two different injuries that resulted in pulp preservation in both cases. This in turn has provided for normal root development to occur while also allowing for preservation of bone.

Relationship between the maxillary transverse dimension and palatally displaced canines: A cone-beam computed tomographic study.

PubMed

Hong, Wei-Hsin; Radfar, Rebecca; Chung, Chun-Hsi

2015-05-01

To examine the relationship between palatally displaced maxillary canines (PDC) and the maxillary transverse dimension using cone-beam computed tomography (CBCT). Thirty-three patients (11 males and 22 females, mean age 18.2 years) with PDC were matched to 66 patients (22 males and 44 females, mean age 18.1 years) without PDC (control) by gender, age, and posterior occlusion. A CBCT image was taken on all the patients prior to any orthodontic treatment. For each patient the maxillary basal bone widths and interdental widths at the maxillary first molars and first and second premolars were measured on axial and coronal sections of CBCT images. In addition, the presence of permanent tooth agenesis and the widths of maxillary incisors were recorded. Similar maxillary transverse dimensions, both skeletally and dentally, were found between the PDC and control groups. In the PDC group, the number of patients with permanent tooth agenesis was six times higher than in the control group. In addition, the maxillary lateral incisors on PDC-affected sides were smaller than those of control group (P < .05). The maxillary transverse dimension, both skeletally and dentally, had no effect on the occurrence of PDC. The higher prevalence of permanent tooth agenesis was found in the PDC group. Moreover, the mean mesiodistal width of maxillary lateral incisors in the PDC group was significantly smaller than in the control group (P < .05).

Endodontic treatment of a maxillary central incisor with two roots.

PubMed

Maghsoudlou, Amir; Jafarzadeh, Hamid; Forghani, Maryam

2013-03-01

This clinical report presents a rare case of maxillary central incisor with two separate roots. Unusual morphology of the roots and root canals may exist in any tooth. Recognition of the dental anatomy and its variations is necessary for successful endodontic therapy. It is well known that maxillary incisors are usually single-rooted teeth. The root canals were instrumented with conventional hand files and Gates Glidden and obturated by using the lateral technique. Recall radiograph after 1 year shows the healing process of the preoperative apical periodontitis. Clinicians should be aware of unexpected root canal morphology when performing root canal therapy. The present case demonstrated the importance of accurate preoperative radiograph and adequate access preparation.

Management of a congenitally missing maxillary central incisor. A case study.

PubMed

Tichler, Howard M; Abraham, Jenny E

2007-03-01

When a maxillary lateral incisor is missing, often the treatment options can be clearly defined, that is, substitute an adjacent tooth for the missing one; open the space for an implant, a bonded bridge or fixed bridge. When a maxillary central incisor is missing and the space for the tooth is absent, the treatment choices become complicated, especially in a growing child. There must be multi-disciplinary coordination among the restorative dentist, the oral surgeon or periodontist, and the orthodontist to obtain the optimum result. At the initiation of treatment, this information must be relayed and the treatment plan agreed upon by the patient or the parents of the patient.

Impaction of Maxillary Central Incisors: Surgical and Orthodontic Treatment--Case Report.

PubMed

Knop, Luegya Amorim Henriques; Shintcovsk, Ricardo Lima; Gandini, Luiz Gonzaga; Parsekian, Lidia; Pinto, Ary Santos

2015-01-01

The aim of this paper is to report two clinical cases, which was performed with surgical exposure and orthodontic traction of a maxillary central incisors. Light forces were used during the orthodontic treatment applied on rigid wires as anchorage. It was noted that teeth presented adequate clinical crown height and gingival contours.

Do different vertical positions of maxillary central incisors influence smile esthetics perception?

PubMed Central

Menezes, Erica Bretas Cabral; Bittencourt, Marcos Alan Vieira; Machado, Andre Wilson

2017-01-01

ABSTRACT INTRODUCTION: The purpose of this study was to determine the perception of smile esthetics among orthodontists and layperson, with respect to different maxillary central incisors vertical positions in full-face and close-up smile analyses. METHODS: Frontal photographs of the smiles of two adult women were used. Images were altered to create a symmetrical image with the gingival margin levels of the maxillary canines matching the central incisors and a 1.0-mm central-to-lateral incisal step. Later, the images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. The images were randomly assembled in an album, which was given to 114 judges, 57 orthodontists and 57 laypersons, who were asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were statistically analyzed by means of 1-way analysis of variance with the Tukey post-hoc test and the Student t test. RESULTS: The highest rated smiles showed two notable characteristics: a) the central incisor gingival margins matched or were 0.5 mm below the line of the canine gingival margins and; b) the central-to-lateral incisal step was 1.0 to 1.5 mm. The worst smiles showed two notable characteristics: a) the central incisor gingival margins were 1.0 mm above or 1.5 mm below the canine gingival margins and; b) no step between the centrals and laterals or a 2.5-mm step. CONCLUSION: The vertical position of the maxillary central incisors significantly affected the perception of the smile esthetics, whereas slightly extruded central incisors were more esthetically preferred than intruded. PMID:28658361

Validity of palatal superimposition of 3-dimensional digital models in cases treated with rapid maxillary expansion and maxillary protraction headgear

PubMed Central

Choi, Jin-Il; Jost-Brinkmann, Paul-Georg; Choi, Dong-Soon; Jang, In-San

2012-01-01

Objective The purpose of this study was to evaluate the validity of the 3-dimensional (3D) superimposition method of digital models in patients who received treatment with rapid maxillary expansion (RME) and maxillary protraction headgear. Methods The material consisted of pre- and post-treatment maxillary dental casts and lateral cephalograms of 30 patients, who underwent RME and maxillary protraction headgear treatment. Digital models were superimposed using the palate as a reference area. The movement of the maxillary central incisor and the first molar was measured on superimposed cephalograms and 3D digital models. To determine whether any difference existed between the 2 measuring techniques, intra-class correlation (ICC) and Bland-Altman plots were analyzed. Results The measurements on the 3D digital models and cephalograms showed a very high correlation in the antero-posterior direction (ICC, 0.956 for central incisor and 0.941 for first molar) and a moderate correlation in the vertical direction (ICC, 0.748 for central incisor and 0.717 for first molar). Conclusions The 3D model superimposition method using the palate as a reference area is as clinically reliable for assessing antero-posterior tooth movement as cephalometric superimposition, even in cases treated with orthopedic appliances, such as RME and maxillary protraction headgear. PMID:23173116

[Finite element analysis of the maxillary central incisor with crown lengthening surgery and post-core restoration in management of crown-root fracture].

PubMed

Zhen, Min; Hu, Wen-jie; Rong, Qi-guo

2015-12-18

To construct the finite element models of maxillary central incisor and the simulations with crown lengthening surgery and post-core restoration in management of different crown-root fracture types, to investigate the stress intensity and distributions of these models mentioned above, and to analyze the indications of crown lengthening from the point of view of mechanics. An extracted maxillary central incisor and alveolar bone plaster model were scanned by Micro-CT and dental impression scanner (3shape D700) respectively. Then the 3D finite element models of the maxillary central incisor and 9 simulations with crown lengthening surgery and post-core restoration were constructed by Mimics 10.0, Geomagic studio 9.0 and ANSYS 14.0 software. The oblique static force (100 N) was applied to the palatal surface (the junctional area of the incisal 1/3 and middle 1/3), at 45 degrees to the longitudinal axis, then the von Mises stress of dentin, periodontal ligament, alveolar bone, post and core, as well as the periodontal ligament area, were calculated. A total of 10 high-precision three-dimensional finite element models of maxillary central incisor were established. The von Mises stress of models: post>dentin>alveolar bone>core>periodontal ligament, and the von Mises stress increased linearly with the augmentation of fracture degree (besides the core). The periodontal ligament area of the crown lengthening was reduced by 12% to 33%. The von Mises stress of periodontal ligament of the B2L2c, B2L3c, B3L1c, B3L2c, B3L3c models exceeded their threshold limit value, respectively. The maxillary central incisors with the labial fracture greater than three-quarter crown length and the palatal fracture deeper than 1 mm below the alveolar crest are not the ideal indications of the crown lengthening surgery.

Correlation between Visible Length of the Iris and the Length of the Maxillary Central Incisor Using Digital Image Analysis- A Pilot Study.

PubMed

Rohini; Hemalatha; Chander, Gopi Naveen; Anitha, Kuttae Viswanathan

2017-02-01

Complete denture therapy is one such modality where science and art goes hand in hand. Selection of artificial teeth for completely edentulous patients is not easy in the absence of pre extraction records, because till date concrete guidelines do not exist. The purpose of this study was to determine if a correlation existed between the visible length of the iris and the length of the maxillary central incisor to potentially provide a guide for teeth selection. A total of 20 Indian dental students consented to participate in the pilot study. Standardized digital images of the face revealing the eyes and component of teeth on smiling was captured using a digital camera. The digital measurements of the visible iris length (medial aperture height, tangential to iris) and the length of the maxillary central incisor from the zenith to the incisal edge were analysed using Adobe Photoshop creative cloud software. The data was statistically evaluated and results were tabulated. Karl Pearson's Coefficient of Correlation was utilized to detect if any association existed between the two variables. The mean value of length of central incisor was 10.39 mm and the mean value of the visible length of iris was found to be 12.9 mm. A Pearson correlation analysis revealed an r-value <0.3 indicating minimal association between the two variables with a p-value >0.01 (.322). On inference, the correlation between the visible iris length and that of maxillary central incisor were unable to produce a strong positive statistical association. However, an association factor between the two has been obtained. Deduction of 2.5 mm from the dimension of visible iris length will help in attaining the length of artificial maxillary central incisor tooth.

Relationship between degree of malocclusion and occlusal interference in mice that spontaneously develop anterior transverse crossbite.

PubMed

Tsukamoto, Yuri; Kajii, Takashi S; Sugawara-Kato, Yuki; Hirabayashi, Yoshifumi; Fujimori, Osamu; Iida, Junichiro

2010-12-01

Mice with brachymorphism (bm) have defective chondrogenesis, including abnormal growth of the spheno-occipital synchondrosis. Malocclusion (anterior transverse crossbite) sometimes spontaneously occurs in inbred BALB/c-bm/bm mice, before the mandibular incisors erupt and make contact with the maxillary incisors. The aim of this study was to determine whether functional lateral loads to incisors promote anterior transverse crossbites in BALB/c-bm/bm mice. BALB/c-bm/bm mice with normal occlusion (normal group), BALB/c-bm/bm mice with malocclusion in which the incisors were not cut (mal group), and BALB/c-bm/bm mice in which the incisors had been cut to eliminate the functional lateral load during continued growth (mal-cut group) were used. We examined the amounts of shift of the maxillary and mandibular incisors in each group using radiographic images. The amount of shift of the maxillary incisors in the mal group was significantly greater than that in normal group. The total amount of shift from the maxilla to the mandible in the mal group was significantly greater than in the normal and mal-cut groups. The results suggest that a continuous functional lateral load to the incisors is strongly related to promoting and worsening anterior transverse crossbite in BALB/c-bm/bm mice. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Comparison of treatment outcomes in patients with maxillary dentoalveolar protrusion by applying different anchorage methods: a three-dimensional model study].

PubMed

Ning, Ma; Weiran, Li

2015-02-01

This study aims to compare the treatment outcomes in patients with maxillary dentoalveolar protrusion by applying different anchorage methods via three-dimensional model measurement. A total of 46 patients with maxillary dentoalveolar protrusion treated with bilateral maxillary first premolar extractions and high anchorage were selected. The subjects were randomly divided into three groups according to the type of anchorage applied, which included implant, extraoral, and Nance arch anchorages. The maxillary dental models were made before treatment and after space closure of maxilla. The movements of the maxillary central incisors and first molars were measured via a three-dimensional model measurement, and the amounts of movement were compared among the three groups. The sagittal lingual movements of the maxillary central incisors were (-6.661 ± 1.328), (-5.939 ± 1.806), and (-5.788 ± 2.009) mm for the implant, extraoral, and Nance arch anchorage groups, respectively, with no significant difference among the three groups (P = 0.121). The corresponding vertical movements of the maxillary central incisors were (0.129 ± 1.815) mm intrusion, and (-2.162 ± 2.026), (-2.623 ± 1.776) mm extrusion. Significant difference was found between the implant anchorage group and the other groups (P < 0.05). The corresponding sagittal mesial movements of the maxillary first molars were (0.608 ± 1.045), (1.445 ± 1.462), and (1.503 ± 0.945) mm. The corresponding vertical movements of the maxillary first molars were (0.720 ± 0.805) mm intrusion, (0.076 ± 0.986) mm intrusion, and (-0.072 ± 0.690) mm extrusion. Significant difference was found between the implant anchorage group and the other two groups (P < 0.05). In the transverse direction, the first molars all moved lingually with no significant difference among the three groups (P > 0.05). Implant anchorage may be superior in the vertical control of the maxillary incisors and in the sagittal, as well as in the vertical control of the maxillary molars, compared with the traditional anchorages during the treatment of patients with maxillary dentoalveolar protrusion.

Incisal Apical Root Resorption Evaluation after Low-Friction Orthodontic Treatment Using Two-Dimensional Radiographic Imaging and Trigonometric Correction.

PubMed

Savoldi, Fabio; Bonetti, Stefano; Dalessandri, Domenico; Mandelli, Gualtiero; Paganelli, Corrado

2015-11-01

Root resorption shall be taken into consideration during every orthodontic treatment, and it can be effected by the use of different techniques, such as the application of low friction mechanics. However, its routinely assessment on orthopantomography has limitations related to distortions and changes in dental inclination. The aim of this investigation was to evaluate the severity of apical root resorption of maxillary and mandibular incisors after low-friction orthodontic treatment, using the combination of panoramic and lateral radiographs, and applying a trigonometric correction. A hospital based Retrospective study at the orthodontic Department (Dental School, University of Brescia, Spedali Civili di Brescia, Brescia, Italy). Ninety-three subjects (53 females and 40 males; mean age, 14 years) with mild teeth crowding were treated without extractions by the same operator using a low-friction fixed appliance following an integrated straight wire (ISW) protocol. The pre- and post-treatment tooth lengths of the maxillary and mandibular incisors were measured on panoramic radiographs. A trigonometric factor of correction for the pre-treatment length was calculated based on the difference between the pre and post-treatment incisal inclination on lateral cephalograms. The changes in lengths were investigated using the Student's t-test for paired values (p<0.05). Maxillary central incisors showed no changes (0.3%, 0.6%), maxillary lateral incisors showed a small increase (1.4%, 1.8%) that was attributed to the completion of root development in younger patients, mandibular central and lateral incisors underwent slight resorption (-3.1%, -3.4%). A statistically significant difference was found for the mandibular incisors but not for the maxillary ones. In patients with mild crowding and consequent low amount of root movement, a low-friction orthodontic treatment can lead to slight apical root resorption, mainly involving lower incisors. The use of a trigonometric correction in the panoramic radiograph analysis may reduce the limitations of this 2D evaluation.

Root canal treatment of a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement: a case report.

PubMed

Er, K; Bayram, M; Taşdemir, T

2011-12-01

To present the successful endodontic management of a maxillary lateral incisor tooth with a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement. A 22-year-old female was diagnosed with a skeletal Class II, Division 2 malocclusion with Class II molar and canine relationships on both sides. The treatment plan included distalization of the maxillary first molars bilaterally followed by full fixed appliance therapy. For the maxillary molar distalization, an appliance in conjunction with a miniscrew anchorage system was designed. Two months later, the patient came to the clinic with complaints of pain in the maxillary right lateral incisor region. On intraoral examination, intraoral sinus tracts were detected in the maxillary right buccal sulcus and palate. A large radiolucent lesion with a well-defined margin around the root of the maxillary right lateral incisor was seen. Root canal treatment was performed on the maxillary right lateral incisor tooth. The root canal was filled with gutta-percha and AH Plus sealer, using a lateral compaction technique. The final restoration of the tooth was completed using composite, and the tooth was reviewed after 10 months. The tooth was asymptomatic and radiographically showed repair of the lesion. Healing was achieved without any need for further endodontic or surgical intervention. Key learning points • This case illustrates the need to take care with miniscrews when performing orthodontic treatment, especially when the miniscrews are in close proximity to root apices. • The periradicular lesion as a result of miniscrew damage was successfully treated with root canal treatment. © 2011 International Endodontic Journal.

Evaluation of maxillary anterior teeth and their relation to the golden proportion in Malaysian population.

PubMed

Al-Marzok, Maan Ibrahim; Majeed, Kais Raad Abdul; Ibrahim, Ibrahim Khalil

2013-01-24

The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth. Dental casts of the maxillary arches were made in this cross-sectional study from MAHSA University College students who met the inclusion criteria. The 49 participants represented the Malaysian population main ethnics. The dimensions of the anterior teeth and the perceived width of anterior teeth viewed from front were measured using a digital caliper. Comparison of the perceived width ratio of lateral to central incisor and canine to lateral incisor with the golden proportion of 0.618 revealed there were a significant statistical difference (p < 0.05). The statistical difference was significant for the width-to-height ratio of central incisors to the golden standard of 80%. There was no significant difference in the comparison among ethnic groups for the golden proportion and the golden standard. The golden proportion was not found to exist between the perceived widths of maxillary anterior teeth. No golden standard were detected for the width-to-height proportions of maxillary incisors. Specific population characteristics and perception of beauty must be considered. However, ethnicity has no association with the proportions of maxillary anterior teeth.

Incisor malalignment and the risk of periodontal disease progression.

PubMed

Alsulaiman, Ahmed A; Kaye, Elizabeth; Jones, Judith; Cabral, Howard; Leone, Cataldo; Will, Leslie; Garcia, Raul

2018-04-01

The objective of this study was to investigate the association between incisor crowding, irregularity, and periodontal disease progression in the anterior teeth. Data collected over 35 years from men enrolled in the Veterans Affairs Dental Longitudinal Study included information concerning pocket depth and alveolar bone loss. Plaster casts of the maxillary (n = 400) and mandibular (n = 408) arches were available for baseline measurements. Periodontal disease in the anterior teeth was defined as per arch sum of pathologic pocket depth and sum of teeth with any alveolar bone loss in the anterior sextants. Incisor malalignment status was defined by the anterior tooth size-arch length discrepancy index and Little's Irregularity Index. Adjusted mixed effects linear models computed the beta (β) estimates and 95% confidence intervals (95% CI) of the amounts of change in periodontal disease outcomes by the level of malalignment. In the anterior maxillary arch, crowding and spacing were significantly associated with an increased per-arch sum of pathologic pocket depth (β, 0.70 mm; 95% CI, 0.20-1.21, and β, 0.49 mm; 95% CI, 0.06-0.91, respectively). In the anterior mandibular arch, incisor crowding and irregularity were significantly associated with an increased per-arch sum of pathologic pocket depth (mild crowding: β, 0.47 mm; 95% CI, 0.01-0.93; severe irregularity: β, 0.94 mm; 95% CI, 0.50-1.38), and the sum number of teeth with alveolar bone loss (mild and moderate-to-severe crowding: β, 0.45 teeth; 95% CI, 0.08-0.82; and β, 0.45 teeth; 95% CI, 0.13-0.83, respectively; moderate irregularity: β, 0.34 teeth; 95% CI, 0.06-0.62). Certain incisor malalignment traits (ie, maxillary incisor crowding, maxillary incisor spacing, mandibular incisor mild crowding, mandibular incisor moderate-to-severe crowding, mandibular incisor moderate irregularity, and mandibular incisor severe irregularity) are associated with significant periodontal disease progression. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Finite element analysis of maxillary incisor displacement during en-masse retraction according to orthodontic mini-implant position

PubMed Central

Song, Jae-Won; Lim, Joong-Ki; Lee, Kee-Joon; Sung, Sang-Jin; Chun, Youn-Sic

2016-01-01

Objective Orthodontic mini-implants (OMI) generate various horizontal and vertical force vectors and moments according to their insertion positions. This study aimed to help select ideal biomechanics during maxillary incisor retraction by varying the length in the anterior retraction hook (ARH) and OMI position. Methods Two extraction models were constructed to analyze the three-dimentional finite element: a first premolar extraction model (Model 1, M1) and a residual 1-mm space post-extraction model (Model 2, M2). The OMI position was set at a height of 8 mm from the arch wire between the second maxillary premolar and the first molar (low OMI traction) or at a 12-mm height in the mesial second maxillary premolar (high OMI traction). Retraction force vectors of 200 g from the ARH (-1, +1, +3, and +6 mm) at low or high OMI traction were resolved into X-, Y-, and Z-axis components. Results In M1 (low and high OMI traction) and M2 (low OMI traction), the maxillary incisor tip was extruded, but the apex was intruded, and the occlusal plane was rotated clockwise. Significant intrusion and counter-clockwise rotation in the occlusal plane were observed under high OMI traction and -1 mm ARH in M2. Conclusions This study observed orthodontic tooth movement according to the OMI position and ARH height, and M2 under high OMI traction with short ARH showed retraction with maxillary incisor intrusion. PMID:27478801

Unpredictability of soft tissue changes after camouflage treatment of Class II division 1 malocclusion with maximum anterior retraction using miniscrews.

PubMed

Kim, Kayoung; Choi, Sung-Hwan; Choi, Eun-Hee; Choi, Yoon-Jeong; Hwang, Chung-Ju; Cha, Jung-Yul

2017-03-01

To compare soft and hard tissue responses based on the degree of maxillary incisor retraction using maximum anchorage in patients with Class II division 1 malocclusion. This retrospective study sample was divided into moderate retraction (<8.0 mm; n = 28) and maximum retraction (≥8.0 mm; n = 29) groups based on the amount of maxillary incisor retraction after extraction of the maxillary and mandibular first premolars for camouflage treatment. Pre- and posttreatment lateral cephalograms were analyzed. There were 2.3 mm and 3.0 mm of upper and lower lip retraction, respectively, in the moderate group; and 4.0 mm and 5.3 mm, respectively, in the maximum group. In the moderate group, the upper lip was most influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.94). The lower lip was most influenced by posterior movement of B-point (β = 0.84) and the cervical point of the mandibular incisor (β = 0.83). Prediction was difficult in the maximum group; no variable showed a significant influence on upper lip changes. The lower lip was highly influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.50), but this correlation was weak in the maximum group. Posterior movement of the cervical point of the anterior teeth is necessary for increased lip retraction. However, periodic evaluation of the lip profile is needed during maximum retraction of the anterior teeth because of limitations in predicting soft tissue responses.

Non-extraction treatment of a Class III skeletal case.

PubMed

Gonzalez, Bulmario

2009-01-01

Adult Class III Skeletal treatment options have generally included some form of surgery (Maxillary advancement in midface deficient cases and/or Mandibular set-back). This article discusses non-surgical treatment of an adult patient using the combined concepts of mandibular molar distalization enhanced with TADs and non-extraction camouflage dental correction through maxillary incisor protraction and mandibular incisor lingualization.

Maxillary incisors changes during space closure with conventional and skeletal anchorage methods: a systematic review.

PubMed

Jayaratne, Yasas Shri Nalaka; Uribe, Flavio; Janakiraman, Nandakumar

2017-01-01

The objective of this systematic review was to compare the antero-posterior, vertical and angular changes of maxillary incisors with conventional anchorage control techniques and mini-implant based space closure methods. The electronic databases Pubmed, Scopus, ISI Web of knowledge, Cochrane Library and Open Grey were searched for potentially eligible studies using a set of predetermined keywords. Full texts meeting the inclusion criteria as well as their references were manually searched. The primary outcome data (linear, angular, and vertical maxillary incisor changes) and secondary outcome data (overbite changes, soft tissue changes, biomechanical factors, root resorption and treatment duration) were extracted from the selected articles and entered into spreadsheets based on the type of anchorage used. The methodological quality of each study was assessed. Six studies met the inclusion criteria. The amount of incisor retraction was greater with buccally placed mini-implants than conventional anchorage techniques. The incisor retraction with indirect anchorage from palatal mini-implants was less when compared with buccally placed mini-implants. Incisor intrusion occurred with buccal mini-implants, whereas extrusion was seen with conventional anchorage. Limited data on the biomechanical variables or adverse effects such as root resorption were reported in these studies. More RCT's that take in to account relevant biomechanical variables and employ three-dimensional quantification of tooth movements are required to provide information on incisor changes during space closure.

Complications of misdiagnosis of maxillary canine ectopic eruption.

PubMed

Garib, Daniela Gamba; Janson, Guilherme; Baldo, Taiana de Oliveira; dos Santos, Patrícia Bittencourt Dutra

2012-08-01

Ectopic eruption of maxillary canines can be associated with root resorption of adjacent teeth. This case report describes and discusses an interesting case of a 15-year-old girl with a Class III malocclusion and an impacted maxillary canine. Because of the unfavorable position of the ectopic canine and the severe root resorption of the maxillary left central and lateral incisors, the treatment options included extraction of the maxillary permanent canines. The mandibular first premolars were extracted to compensate for the Class III malocclusion. A panoramic radiograph taken earlier in the mixed dentition already indicated a possible eruption disturbance of the maxillary left permanent canine. The importance of early diagnosis of maxillary canine ectopic eruption is highlighted in this case report. The early identification of radiographic signs of an ectopic pathway of eruption should be followed by deciduous canine extraction to prevent canine retention and maxillary incisor root resorption. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Health of periodontal tissues and resorption status after orthodontic treatment of impacted maxillary canines.

PubMed

Oz, A Z; Ciger, S

2018-03-01

The aim of the present study was to evaluate the changes of incisor root resorption associated with impacted maxillary canines and health of periodontal tissues around maxillary canines erupted with orthodontic treatment. Twenty patients with a unilateral palatally impacted maxillary canine were included in the study. Cone-beam computed tomography images taken before and after orthodontic treatment were compared with the contralateral canines serving as control teeth. Root resorption was present in 10% of central and 40% of lateral incisors before treatment. After treatment, the incidence of resorption decreased. The thickness of the buccal bone surrounding the impacted canines was similar to that surrounding the contralateral canines, except in the apical area. Periodontal pocket depth and alveolar bone loss were greater for the impacted canine teeth than for the contralateral canines. Incisor root resorption associated with impacted canine teeth showed signs of repair after orthodontic treatment. Slight differences related to periodontal health were found between the previously impacted teeth and contralateral canine teeth.

Root resorption of permanent incisors during three months of active orthodontic treatment.

PubMed

Batool, Iffat; Abbas, Hasnain; Abbas, Assad; Abbas, Iram

2010-01-01

Root resorption is one of the most common and undesirable sequelea of orthodontic treatment. The aim of this study was to evaluate the amount of root resorption in permanent incisors during 3 month active period of fixed orthodontic appliance therapy using periapical radiographs. Periapical radiographs of a total of 138 permanent teeth (n = 138, mandibular n1 = 52, maxillary n2 = 86) were evaluated for root resorption. All patients were treated with 3M MBT multi-bonded, pre-adjusted appliances with 0.022 inch slots. Initial levelling and alignment was achieved with 0.0175 inch co-axial wires. All four incisors (maxillary and mandibular) were measured for any change in root length. The change in root length between T0 (pre-treatment) and T1 (post-treatment) was measured in millimetres and expressed in terms of percentage of original root length. The mean pre treatment (T0) root length for the maxillary teeth (n1 = 62) was 19.27 +/- 2.86 mm and 20.01 +/- 2.57 mm for the mandibular teeth (n2 = 31). The post-treatment (T1) root length for the maxillary teeth was 18.96 +/- 2.85 mm and 19.49 +/- 2.4 mm for the mandibular teeth showing a mean resorption of 0.31 mm and 0.52 mm for the maxillary and mandibular teeth respectively. Root resorption was strongly correlated with active orthodontic appliance therapy with maxillary and mandibular incisors being most susceptible. It was found that root resorption can be detected even in the early levelling and alignment stages of orthodontic treatment.

An In Vitro Study on the Effects of Post-Core Design and Ferrule on the Fracture Resistance of Endodontically Treated Maxillary Central Incisors.

PubMed

Sreedevi, S; Sanjeev, R; Raghavan, Rekha; Abraham, Anna; Rajamani, T; Govind, Girish Kumar

2015-08-01

Endodontically treated teeth have significantly different physical and mechanical properties compared to vital teeth and are more prone to fracture. The study aims to compare the fracture resistance of endodontically treated teeth with and without post reinforcement, custom cast post-core and prefabricated post with glass ionomer core and to evaluate the ferrule effect on endodontically treated teeth restored with custom cast post-core. A total of 40 human maxillary central incisors with similar dimensions devoid of any root caries, restorations, previous endodontic treatment or cracks were selected from a collection of stored extracted teeth. An initial silicone index of each tooth was made. They were treated endodontically and divided into four groups of ten specimens each. Their apical seal was maintained with 4 mm of gutta-percha. Root canal preparation was done and then post core fabrication was done. The prepared specimens were subjected to load testing using a computer coordinated UTM. The fracture load results were then statistically analyzed. One-way ANOVA was followed by paired t-test. 1. Reinforcement of endodontically treated maxillary central incisors with post and core, improved their fracture resistance to be at par with that of endodontically treated maxillary central incisor, with natural crown. 2. The fracture resistance of endodontically treated maxillary central incisors is significantly increased when restored with custom cast post-core and 2 mm ferrule. With 2 mm ferrule, teeth restored with custom cast post-core had a significantly higher fracture resistance than teeth restored with custom cast post-core or prefabricated post and glass ionomer core without ferrule.

Prevalence of an unusual hypoplastic defect of the permanent maxillary lateral incisor in great apes.

PubMed

Hannibal, Darcy L

2017-02-01

In this article, I describe a previously unreported maxillary lateral incisor defect (MLID) of the enamel in great apes and evaluate potential general causes (genetic, systemic stress, or localized disturbance), as well as examine differences in prevalence among the represented taxa. This defect occurred only on the labial surface of the maxillary lateral incisor and extended from the cervical-mesial quarter of the crown to the mesial edge of the cementoenamel junction (CEJ). The study sample consisted of 136 great ape specimens, including 41 gorillas, 25 chimpanzees, and 70 orangutans from the Smithsonian's National Museum of Natural History great ape collection. I used logistic regression to assess the prevalence of this defect in the sample and a binomial probability test for bilaterality. This defect of the maxillary lateral incisor is the second most common defect I observed in the study sample (30.1% of individuals affected), and was more likely to occur in individuals with linear enamel hypoplasia (LEH) and pit defects than those without these defects. Among specimens with both maxillary lateral incisors present, the defect was mostly bilateral. Pan and Pongo were significantly more likely to exhibit the defect than Gorilla. Between Pongo species, Pongo pygmaeus was significantly more likely to exhibit the defect than Pongo abelii. Between subspecies of Gorilla, although Gorilla gorilla gorilla exhibited the defect and Gorilla gorilla beringei did not, the difference was not significant. No sex differences were evident in this sample. The prevalence of this defect indicates it is not hereditary. The bilateral trend indicates a systemic cause, although the high inter-tooth specificity suggests a local disturbance and a combination of both is possible. © 2016 Wiley Periodicals, Inc.

Canine substitution for missing maxillary lateral incisors: the influence of canine morphology, size, and shade on perceptions of smile attractiveness.

PubMed

Brough, Elaine; Donaldson, Ana Nora; Naini, Farhad B

2010-12-01

This study was conducted to determine whether variations in the morphology, size, or shade of maxillary canines would influence perceptions of smile attractiveness in patients with canines substituted for missing maxillary lateral incisors. A smiling photograph of a hypodontia patient who had had orthodontic space closure with maxillary canines replacing the lateral incisors was digitally modified to create a bilaterally symmetrical image. Four groups of images were created, digitally altering canine gingival height, crown tip height, canine width, and canine shade. Three groups of judges (40 orthodontists, 40 dentists, and 40 laypeople) ranked the images for smile attractiveness, also scoring the most and the least attractive of each of the 4 groups, and the most and least attractive of all images. Canine gingival height was the most attractive 0.5 mm below the gingival margin of the maxillary central incisor and progressively less attractive with increasing gingival height. Increasing canine width, increased canine tip height, and pointed canines were perceived to be unattractive. Brighter than normal shades of canines were preferred to darker shades. Narrow canine crowns were most frequently ranked as the most attractive overall, 1.5 mm narrower was preferred by the orthodontists and dentists, and 3.0 mm narrower was preferred by the laypeople. All 3 groups ranked the darkest image, 20 times darker than the original, most frequently as the least attractive image overall. There was good general agreement between orthodontists, dentists, and laypeople for all 4 parameters of smile attractiveness, although laypeople demonstrated greater intragroup variations. The morphology, size, and shade of the maxillary canine in patients having orthodontic space closure and lateral incisor substitution can have a marked effect on perceived smile attractiveness. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Exophthalmos associated to orbital zygomatic mucocele and complex maxillary malformation in a puppy

PubMed Central

Cirla, Alessandro; Rondena, Marco; Bertolini, Giovanna; Barsotti, Giovanni

2017-01-01

A case of exophthalmos due to zygomatic mucocele in a puppy with ipsilateral segmental maxillary atrophy is reported. A 7-month-old, mixed breed, male dog suffered the sudden-onset of unilateral painful exophthalmos and a gradual swelling of the right temporal region. A compressing, right retrobulbar mass was observed by ultrasound. Computed tomography revealed a large multiloculated cyst-like lesion of the right zygomatic gland projecting into the orbital space, thus displacing the eyeball. The ipsilateral molar part of the maxillary bone was underdeveloped, besides showing crowded, abnormal, multiple, unerupted maxillary molar teeth in the caudal maxillary region. Modified lateral orbitotomy and a selective caudal maxillary bone access were performed. The cyst-like lesion was removed and the zygomatic gland and the wall was collected for histology, which confirmed the mucocele. Clinical and imaging examinations six months after surgery showed neither recurrence of the mucocele nor ocular abnormalities. A possible common pathogenic mechanism involving these two conditions could be hypothesized. PMID:28884074

Prevalence of shovel-shaped incisors in Saudi Arabian dental patients.

PubMed

Saini, T S; Kharat, D U; Mokeem, S

1990-10-01

The prevalence of maxillary incisor shoveling was studied radiographically in 990 Saudi patients. According to the radiomorphologic characteristics, a new classification was developed and shovel teeth were categorized. The findings of this study showed 9% shovel-shaped incisors; among those, 4% were central incisors and 5% were lateral incisors. Frequency of dens invaginatus occurrence with the shovel-shaped incisors was also investigated. Eight percent of shovel-shaped incisors showed presence of dens invaginatus. Prevalence was found to be 4% in central shovel-shaped incisors, whereas that in lateral shovel-shaped incisors was 11%.

Bilateral cross-bite treated by repeated rapid maxillary expansions: a 17-year follow-up case.

PubMed

Cozzani, M; Mazzotta, L; Caprioglio, A

2014-07-01

The objective of this paper is to show the clinical results after the repeated application of a Haas expander for rapid maxillary expansion (RME) anchored onto deciduous teeth in a 7-year-old patient that presented bilateral cross-bite, superior crowding and no space for permanent lateral incisors eruption. A first Haas expander was applied to the patient. She was told to activate it once a day, each activation was equal to 0.20 mm. After the first RME, the bilateral cross-bite was solved but still there was not enough space for lateral incisor eruption. A second and then a third Haas expander were applied, with the same activation protocol as the first one, in order to gain space in the anterior region and to achieve proper eruption of the lateral incisors. The patient was then treated with fixed appliances. At debonding the patient presented well aligned arch-forms: space for lateral incisor eruption was gained and superior crowding was solved. Bilateral cross-bite was also corrected. She was seen again 10 years and 17 years after expansions: she showed no relapse and presented a good functional occlusion that had remained stable, and an aesthetically pleasant smile, however she exhibited gingival recessions. Repeated rapid maxillary expansion, anchored onto deciduous teeth, performed in early mixed dentition represents a safe and successful treatment to correct severe bilateral cross- bites and to create space for maxillary incisor eruption.

Incisor crown bending strength correlates with diet and incisor curvature in anthropoid primates.

PubMed

Deane, Andrew S

2015-02-01

Anthropoid incisors are large relative to the postcanine dentition and function in the preprocessing of food items. Previous analyses of anthropoid incisor allometry and shape demonstrate that incisor morphology is correlated with preferred foods and that more frugivorous anthropoids have larger and more curved incisors. Although the relationship between incisal crown curvature and preferred foods has been well documented in extant and fossil anthropoids, the functional significance of curvature variation has yet to be conclusively established. Given that an increase in crown curvature will increase maximum linear crown dimensions, and bending resistance is a function of linear crown dimensions, it is hypothesized that incisor crown curvature functons to increase incisor crown resistance to bending forces. This study uses beam theory to calculate the mesiodistal and labiolingual bending strengths of the maxillary and mandibular incisors of hominoid and platyrrhine taxa with differing diets and variable degrees of incisal curvature. Results indicate that bending strength correlates with incisal curvature and that frugivores have elevated incisor bending resistance relative to folivores. Maxillary central incisor bending strengths further discriminate platyrrhine and hominoid hard- and soft-object frugivores suggesting this crown is subjected to elevated occlusal loading relative to other incisors. These results are consistent with the hypothesis that incisor crown curvature functions to increase incisor crown resistance to bending forces but does not preclude the possibility that incisor bending strength is a composite function of multiple dentognathic variables including, but not limited to, incisor crown curvature. © 2014 Wiley Periodicals, Inc.

Position and Eruption of Permanent Maxillary Canines in Cases of Maxillary Lateral Incisor Agenesis in Mixed Dentition.

PubMed

Lamas, Cátia; Lavall, Asela; Pinho, Teresa

2018-01-01

Assess whether the permanent maxillary canine (MC) has a natural tendency to erupt mesially in children with maxillary lateral incisors agenesis (MLIA), compared to children without agenesis. This retrospective, observational, cross-sectional study consisted of children between 5 and 12 years old divided into three groups: the first group with unilateral MLIA, in which an intraindividual analysis was performed, the second group presented bilateral MLIA, and the third group with patients without agenesis. These last two groups were matched for comparison interindividual, being pared by sex and maturation of the MC. The canine position in the horizontal sector showed a clear mesial positioning of the MC on the agenesis side in individuals with unilateral MLIA (group 1) when compared with the counter lateral side; and in individuals with bilateral MLIA (Group 2) compared with control Individuals without agenesis (group 3). Even with the maintenance of this deciduous tooth in the dental arch, the MC keeps its tendency to mesial eruption. There is a greater tendency for mesial angulation of the maxillary canine in patients with MLIA, regardless of the presence or absence of deciduous lateral incisor.

Comparison of anchorage capacity between implant and headgear during anterior segment retraction.

PubMed

Li, F; Hu, H K; Chen, J W; Liu, Z P; Li, G F; He, S S; Zou, S J; Ye, Q S

2011-09-01

To compare the anchorage effects of the implants and the headgear for patients with anterior teeth retraction in terms of incisor retraction, anchorage loss, inclination of maxillary incisors, positional change of maxillary basal bone, and treatment duration. An electronic search for relative randomized controlled trials (RCTs) prospective and retrospective controlled trials was done through the Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, Embase, Medline, and CNKI, regardless of language of study. Study selection, methodological quality assessment, and data extraction were performed by two reviewers independently. Meta-analysis was performed when possible; otherwise descriptive assessment was done. The search yielded 35 articles, of which eight met the inclusion criteria and were categorized into five groups according to types of intervention. For the midpalatal implant, the anchorage loss was much less than for the headgear group, with insignificant differences in terms of anterior teeth retraction, maxillary incisor inclination, positional change of basal bone, and treatment duration. For the mini-implant, greater anterior teeth retraction and less anchorage loss were demonstrated, with inconsistent results for the other measures. For the onplant, less anchorage loss was noted, with insignificant differences for the other measures. The skeletal anchorage of the midpalatal implant, mini-implant, and onplant offer better alternatives to headgear, with less anchorage loss and more anterior teeth retraction. There were inconsistent results from the included studies in terms of maxillary incisor inclination, positional change of maxillary basal bone, and treatment duration. More qualified RCTs are required to provide clear recommendations.

Comparison of interpupillary distance and combined mesiodistal width of maxillary central incisor teeth in two ethnic groups of Northeast India: An in vivo study.

PubMed

Barman, Jogeswar; Serin, Sangma

2018-01-01

Anthropometric measurements of the face can be used as a guide in selecting proper sized anterior teeth. The aim of this study is to evaluate the relationship between the interpupillary distance (IPD) and the combined mesiodistal width of maxillary central incisors (MDW of MCIs) to establish their morphometric criterion and their significance in two ethnic groups of Northeast India. A total of 120 participants consisting of 60 indigenous students each from Assam and Meghalaya in the age group of 18-25 years were selected after taking their written consent. Standardized facial frontal photographs of all the participants were taken using a digital camera in such a manner that maxillary anterior teeth were visible. The photographs were uploaded onto the computer and saved in a file. Anthropometric measurements of IPD and combined MDW of MCIs in centimeters were made using both Adobe Photoshop ® 7.0 software program and manually using a digital vernier caliper on the developed photographs to a same size of 15 cm × 10 cm. Data obtained were tabulated and analyzed using Student "t"-test and Pearson correlation test. The present study reveals a positive correlation with a high degree of statistical significance between IPD and combined mesiodistal width of maxillary central incisors among all the samples irrespective of gender and ethnicity where P < 0.01. IPD can be used as a guide in determining the suitable mesiodistal dimension of the maxillary central incisors.

[Finite element analysis of different load mode on tooth movement for space closure in patient with bimaxillary protrusion].

PubMed

Zhang, X B; Yin, Y F; Yao, H M; Han, Y H; Wang, N; Ge, Z L

2016-07-01

To investigate the stress distribution on the maxillary anterior teeth retracted with sliding mechanics and micro-implant anchorage using different retraction hook heights and positions. DICOM image data including maxilla and upper teeth were obtained with cone-beam CT. The three-dimensional finite element model was constructed using Mimics software. Brackets and archwire model were constructed using Creo software. The models were instantiated using Pro/Engineer software. Abaqus software was used to simulate the sliding mechanics by loading 2 N force on 0, 2, 4, 6, 8, 10 mm retraction hooks and three different positions, repectively. Rotation of the occlusal plane, the initial displacement and stress distribution of teeth were analyzed. Lingual rotation of maxillary central incisor(0.021°), gingival movement of the maxillary first molar(0.005 mm), and clockwise rotation of the maxillary occlusal plane(0.012°) were observed when the force application point located at the archwire level (0 mm). In contrast, 0.235° labial rotation of the maxillary central incisor, 0.015 mm occlusal movement of the maxillary first molar, and 0.075° anti-clockwise rotation of the maxillary occlusal plane were observed when the force application point located at the higher level(10 mm retraction hook). The more the force application point was located posteriorly at the archwire level, the less lingual rotation of the maxillary central incisor and the more buccal displacement of maxillary first molar was observed. Maxillary anterior tooth rotation and retraction, vertical displacement of posterior segment, and rotation of the occlusal plane could be controlled by adjusting the height and position of the retraction hook in space closure using miniscrew and sliding mechanics.

A nonsurgical endodontic treatment in open-apex and immature teeth affected by dens invaginatus: using a collagen membrane as an apical barrier.

PubMed

Gharechahi, Maryam; Ghoddusi, Jamileh

2012-02-01

The authors' objective in this case report is to demonstrate an effective nonsurgical endodontic treatment in open-apex teeth affected by dens invaginatus (DI) by using a collagen membrane as an apical barrier and using a mineral trioxide aggregate (MTA) apical plug. . The authors present two cases of DI with open apexes in maxillary lateral incisors. In the first case, an adolescent had bilateral Oehlers type II DI and extensive periradicular radiolucency, internal root resorption and a vestibular fistula in the left maxillary lateral incisor. In the second case, an adult had Oehlers type II DI and an incomplete apex in the left maxillary lateral incisor. For both patients, the clinician placed a collagen membrane through the apexes of the left maxillary incisors to provide a resorbable extraradicular barrier against which MTA cement could be packed. The clinician obturated the adolescent's right lateral incisor. In the adolescent, the vestibular sinus tract was closed after one week. At subsequent follow-up examinations, the periradicular regions were completely healed, and postoperative radiographs revealed good bone healing in the lateral incisors. The teeth were asymptomatic and healing was achieved without any need for further endodontic surgical intervention. In the adult patient, the tooth was symptom free after one week, and radiography performed six months after the procedure showed complete healing. and Despite complex anatomy and diagnoses of DI and open apexes, both patients successfully underwent nonsurgical endodontic treatment involving the use of a collagen membrane and an MTA apical plug. Using an extraradicular barrier clinically can help improve the adaptation of MTA in the apexes of open-apex teeth to achieve a complete seal.

Direct restoration of endodontically treated maxillary central incisors: post or no post at all?

PubMed

von Stein-Lausnitz, Manja; Bruhnke, M; Rosentritt, M; Sterzenbach, G; Bitter, K; Frankenberger, R; Naumann, M

2018-04-30

The aim of this ex-vivo study was to evaluate the impact of cavity size and glass-fiber post (GFP) placement on the load capability of endodontically treated maxillary incisors directly restored with resin composite. Ninety-six extracted human maxillary central incisors were endodontically treated and distributed to four groups (n = 24): access cavity (A), access cavity and uni-proximal class III cavity (U), access cavity and bi-proximal class III cavity (B), and decoronated tooth (D). Specimens were restored with resin composite, and 12 specimen of each group received an adhesively placed glass-fiber post (P). Prior to linear loading, specimens were exposed to thermo-mechanical loading (TCML). Statistical analysis was performed using log-rank test after TCML, Kruskall-Wallis and Mann-Whitney U test to compare load capabilities (F max) . Significantly more failures occurred in group D for specimens without GFP during TCML (p = 0.001). F max (mean (SD) in N was (A) 513 (124), (AP) 554 (201), (U) 438 (171), (UP) 537 (232) (B) 483 (219), (BP) 536 (281), D 143 (181), and DP 500 (331), and differed significantly among groups (p = 0.003). Pair-wise comparison revealed lower F max values for group D compared to all other groups (p < 0.034) except group DP. Endodontically treated maxillary central incisors with cavity sizes up to bi-proximal class III may be successfully directly restored with resin composite. Post placement shows no additional effect except for decoronated endodontically treated incisors. Endodontically treated incisors with access cavities to class III cavities can be successfully restored with resin composite. Post placement for decoronated ETT is recommended.

Three-dimensional analysis of the change in the curvature of the smiling line following orthodontic treatment in incisor class II division 1 malocclusion.

PubMed

Mah, Michael; Tan, Wei Chuan; Ong, Sim Heng; Chan, Yiong Huak; Foong, Kelvin

2014-12-01

To investigate the different effects of changes in the occlusal plane, incisors inclination, and maxillary intercanine width on the curvature of the smiling line. Records of 46 subjects (28 females and 18 males, mean age 16.6 ± 4.2 years) with incisor class II division 1 malocclusions were selected. All subjects had four premolar extractions and were treated with preadjusted edgewise appliances. Pre- and post-treatment maxillary dental digital models were virtually aligned via corresponding landmarks to the respective lateral cephalograms. Subsequent two-dimensional superimposition of the aligned cephalograms facilitated the three-dimensional superimposition of the pre- and post-treatment models. This process allowed the quantification of the curvature from a frontal perspective of the models. The change in curvature was then correlated with changes in the cephalometric inclination of the anterior occlusal plane (AOP), functional occlusal plane (FOP), maxillary central incisor (U1), and the intercanine width. Orthodontic correction in this sample resulted in the clockwise rotation of the anterior occlusal plane (5.84 degrees), reduction in proclination of the incisors (-14.39 degrees), increase in intercanine width (2.48mm), and a corresponding increase in the curvature of the smiling line (6.83 degrees). The change in curvature of the smiling line in these subjects was found to be related more significantly to the magnitude of difference in the inclination between the pre-treatment AOP and FOP than to the change in the inclination of the maxillary incisors. With orthodontic treatment, the smiling line can be correlated with cephalometric data to improve or maintain the curvature. © The Author 2013. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Root resorption during orthodontic treatment with self-ligating or conventional brackets: a systematic review and meta-analysis.

PubMed

Yi, Jianru; Li, Meile; Li, Yu; Li, Xiaobing; Zhao, Zhihe

2016-11-21

The aim of this study was to compare the external apical root resorption (EARR) in patients receiving fixed orthodontic treatment with self-ligating or conventional brackets. Studies comparing the EARR between orthodontic patients using self-ligating or conventional brackets were identified through electronic search in databases including CENTRAL, PubMed, EMBASE, China National Knowledge Infrastructure (CNKI) and SIGLE, and manual search in relevant journals and reference lists of the included studies until Apr 2016. The extraction of data and risk of bias evaluation were conducted by two investigators independently. The original outcome underwent statistical pooling by using Review Manager 5. Seven studies were included in the systematic review, out of which, five studies were statistically pooled in meta-analysis. The value of EARR of maxillary central incisors in the self-ligating bracket group was significantly lower than that in the conventional bracket group (SMD -0.31; 95% CI: -0.60--0.01). No significant differences in other incisors were observed between self-ligating and conventional brackets. Current evidences suggest self-ligating brackets do not outperform conventional brackets in reducing the EARR in maxillary lateral incisors, mandible central incisors and mandible lateral incisors. However, self-ligating brackets appear to have an advantage in protecting maxillary central incisor from EARR, which still needs to be confirmed by more high-quality studies.

[Three-dimensional finite element analysis of maxillary incisor retraction with step-shaped vertical closing loop].

PubMed

Zhang, Sheng; Mai, Li-xiang; Liu, Cong-hua; Wang, Da-wei

2011-07-01

To investigate the displacement and stress distribution of upper incisors in three-dimensional (3D) space controlled by step-shaped vertical closing loop. The maxillary teeth and alveolar bone of a volunteer with normal occlusion were scanned with 3D spiral CT. Modeling and calculation were only carried out on right upper central incisor, lateral incisor and their alveolar bone in order to simplify the procedures. A 3D finite element model of archwire-brackets-upper incisors and periodontal tissues was developed using Ansys finite element package. Finally, a 3D finite element model of archwire-brackets-upper incisors and periodontal tissues was established based on mirror symmetry principle. The displacement of maxillary incisors and stress distribution in periodontal tissues were analyzed. When step-shaped vertical closing loop was simply drew back 1 mm, the maximum displacement of upper central incisor in labial and lingual direction were 5.29 × 10(-2) and 0.71 × 10(-2) mm; 10.47 × 10(-3) and 10.20 × 10(-3) mm in gingival and occlusal direction, 10.26 × 10(-3) and 1.63 × 10(-3) mm in medial and distal direction; the maximum displacement of upper lateral incisor in labial and lingual direction were 3.31 × 10(-2) and 0.41 × 10(-2) mm, 10.52 × 10(-3) and 5.10 × 10(-3) mm in gingival and occlusal direction, 6.29 × 10(-3) and 4.64 × 10(-3) mm in medial and distal direction, the displacement trend of them were moving lingually and gingivally similar to bodily movement. The stress peach of upper central incisor, periodontal ligament and alveolar bone were 31.35, 2.52 and 4.64 MPa, the stress peach of upper lateral incisor, periodontal ligament and alveolar bone were 19.59, 1.28 and 4.12 Mpa, the stress distribution of them were similar and the periodontal ligament buffered the stress imposed on the tooth.

Skeletal and dental stability after maxillary distraction with a rigid external device in adult cleft lip and palate patients.

PubMed

Aksu, Muge; Saglam-Aydinatay, Banu; Akcan, Cenk Ahmet; El, Hakan; Taner, Tulin; Kocadereli, Ilken; Tuncbilek, Gokhan; Mavili, Mehmet Emin

2010-02-01

To evaluate skeletal and dental stability in adult cleft lip and palate patients treated with a rigid external distraction system at the end of distraction and during the postdistraction period. Lateral cephalograms of 7 patients were obtained before distraction, at the end of distraction, and during the postdistraction period. The mean age before distraction was 21.56 +/- 4.73 years. The mean follow-up was 37.3 +/- 12.4 months. The assessment of findings showed that skeletal maxillary sagittal movement was achieved in a superoanterior direction. The maxillary depth angle and effective maxillary length increased significantly (2 degrees and 9 mm, respectively) after distraction, whereas the palatal plane angle increased by 8 degrees , resulting in an anterior movement of the maxilla with a counterclockwise rotation. The lower facial height showed no significant changes after distraction. The sagittal movement of the upper incisors and the angulation of the upper first molars increased significantly (4.5 mm and 5.5 degrees , respectively). During the postdistraction period, the maxilla showed a slight relapse (22%). The effective maxillary length decreased by 2 mm. The palatal plane angle almost returned to its original position, showing 7 degrees of clockwise rotation. The lower facial height remained stable. The upper incisors moved anteriorly and the upper first molars showed a significant mesioangular change during follow-up. After distraction, significant maxillary advancement was achieved with a counterclockwise rotation. The upper incisors moved labially, and the upper first molars angulated mesially. After 3 years, a 22% relapse rate was seen in the maxilla. The counterclockwise rotation of the maxilla was returned to its original position. The upper incisors moved more anteriorly. Copyright 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Management of geminated maxillary lateral incisor using cone beam computed tomography as a diagnostic tool.

PubMed

James, Elizabeth Prabha; Johns, Dexton Antony; Johnson, Ki; Maroli, Ramesh Kumar

2014-05-01

Geminated teeth are consequences of developmental anomalies leading to joined elements, due to incomplete attempt of one tooth germ to divide into two. This case report describes successful endodontic treatment of an unaesthetic geminated permanent maxillary lateral incisor tooth and its esthetic rehabilitation using all ceramic crowns. Newer imaging technique like cone beam computed tomography was taken for the better understanding of the complicated root canal morphology.

Comparison of maxillary anterior tooth width and facial dimensions of 3 ethnicities.

PubMed

Parciak, Ewa C; Dahiya, Ankur T; AlRumaih, Hamad S; Kattadiyil, Mathew T; Baba, Nadim Z; Goodacre, Charles J

2017-10-01

As the cosmetic demands of patients increase, determining the appropriate dimensions of the maxillary anterior teeth has become increasingly relevant. The relationship between facial measurements and tooth size provide guidance for maxillary anterior tooth size selection. However, most publications on this topic have focused on the white population, and more data for tooth sizes and their proportions in other ethnicities are needed. The purpose of this observational study was to investigate the relationship between the mesiodistal dimensions of the 6 maxillary anterior teeth and the bizygomatic width, interpupillary distance, intercanthal distance, interalar width, and intercommissural width of individuals of Asian, African-American, and white ethnicities. Standardized digital images of 360 participants (120 Asian, 120 African-American, and 120 white) were used to measure facial segments. Individual dimensions of the 6 maxillary anterior teeth were measured using stone casts with digital sliding caliper. The combined width of the 6 maxillary anterior teeth on a straight line corresponded to the sum of the anterior tooth width. The means and standard deviations from descriptive measurements were calculated and analyzed for face and maxillary anterior tooth ratios and correlations. Statistical analysis was done using the Kruskal-Wallis procedure to compare facial and tooth parameters among the 3 ethnicities. Appropriate post hoc comparisons that adjusted for multiple testing were conducted when warranted (α=.05). The Spearman rho correlation, a nonparametric correlate of the Pearson correlation, was used to associate the facial and tooth parameters within the strata of sex and ethnicity. No consistent ratios were found among the examined facial dimensions and the mesiodistal dimensions of the 6 maxillary anterior teeth among the 3 ethnicities, except for the central incisor width-to-bizygomatic width ratio. No correlations were found between the facial dimensions and mesiodistal dimensions of the 6 maxillary anterior teeth among the 3 ethnicities except in Asian women. For Asian women, the intercommissural width correlated with the width of the central incisor (P=.001), the width of 2 central incisors (P=.001), the width of 4 incisors (P=.003), and the width of 6 maxillary anterior teeth (P=.005). No facial proportions by which the exact width of maxillary anterior teeth could be predicted were found in Asian, African-American, or white populations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Esthetic evaluation of incisor inclination in smiling profiles with respect to mandibular position.

PubMed

Zarif Najafi, Hooman; Oshagh, Morteza; Khalili, Mohammad Hassan; Torkan, Sepideh

2015-09-01

The smile is a key facial expression, and a careful assessment of the facial profile in smiling is an essential part of a complete orthodontic diagnosis. The aim of this study was to determine the preferred maxillary incisor inclination in the smile profile with regard to different mandibular positions. A smiling profile photograph of a man with normal facial profile features was altered digitally to obtain 3 different mandibular sagittal positions in 4-mm decrements or increments from -4 to +4 mm. In each mandibular position, the inclination of the maxillary incisors was changed from -10° to +10° in 5° increments. A total of 234 raters (72 senior dental students, 24 orthodontists, 21 maxillofacial surgeons, 25 prosthodontists, and 92 laypeople) were asked to score each photograph using a Likert-type rating scale. Mann-Whitney, Kruskal-Wallis, and intraclass correlation coefficient tests were used to analyze the data. In retruded and protruded mandibles, normal incisor inclination and the most retroclined incisors were selected as the most and the least attractive images, respectively, by almost all groups. With an orthognathic mandible, the image with the most retroclined incisors was selected as the least attractive, but the raters were not unanimous regarding the most attractive image. The intraclass correlation coefficient was 0.82 (high level of agreement). Also, the sex of the raters had no effect on the rating of the photographs. It is crucial to establish a normal incisor inclination, especially in patients with a mandibular deficiency or excess. An excessive maxillary incisor lingual inclination should be avoided regardless of the mandibular position. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Biometric analysis of the clinical crown and the width/length ratio in the maxillary anterior region.

PubMed

Orozco-Varo, Ana; Arroyo-Cruz, Gema; Martínez-de-Fuentes, Rafael; Jiménez-Castellanos, Emilio

2015-06-01

Restorative dentistry often involves correcting tooth size discrepancies. Therefore, dental biometrics should play an important role in the planning of an esthetic restoration. The purpose of this study was to analyze the clinical crown width, length, and width/length ratio of maxillary central incisors, lateral incisors, and canines in an adult population. The study also aimed to determine whether a correlation exists between natural tooth dimensions and the optimal tooth dimension guidelines suggested for planning esthetic restorations. Stone casts were poured from irreversible hydrocolloid impressions of 412 healthy adult participants. These casts were used to measure the maximum mesiodistal width and maximum crown-root length of the maxillary central incisors, lateral incisors, and canines with a digital precision caliper (0.01 mm). The width/length ratio was calculated for each tooth, and 40 casts were selected to test the reliability of the measuring method. The mean age of the participants in the sample was 33.94 years; 60.7% were women and 39.3% were men. The mean width value was 8.71 mm for central incisors, 6.75 mm for lateral incisors, and 7.81 mm for canines. The mean length was 10.23 mm for central incisors, 8.59 mm for lateral incisors, and 9.93 mm for canines. The average width/length ratio was 85% for central incisors and 79% for lateral incisors and canines. The data obtained from the population studied are similar to those from previous research studies with similar methodology. However, great discrepancies in the absolute values were found when compared with other studies of ideal tooth dimension guidelines on the personal preferences and the esthetic perception of dentists. The perception of what is considered natural seems to differ from what is considered esthetically perfect. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

External apical root resorption in maxillary incisors in orthodontic patients: associated factors and radiographic evaluation.

PubMed

Nanekrungsan, Kamonporn; Patanaporn, Virush; Janhom, Apirum; Korwanich, Narumanus

2012-09-01

This study was performed to evaluate the incidence and degree of external apical root resorption of maxillary incisors after orthodontic treatment and to evaluate particular associated factors related to external apical root resorption. The records and maxillary incisor periapical radiographs of 181 patients were investigated. Crown and root lengths were measured and compared on the pre- and post-treatment periapical radiographs. Crown length was measured from the center of the incisal edge to the midpoint of the cemento-enamel junction (CEJ). Root length was measured from the CEJ midpoint to the root apex. A correction factor for the enlargement difference was used to calculate root resorption. The periapical radiographs of 564 teeth showed that the average root resorption was 1.39±1.27 (8.24±7.22%) and 1.69±1.14 mm (10.16±6.78%) for the maxillary central and lateral incisors, respectively. The results showed that the dilacerated or pointed roots, maxillary premolar extraction cases, and treatment duration were highly significant factors for root resorption (p<0.001). Allergic condition was a significant factor at p<0.01. Age at the start of treatment, large overjet, and history of facial trauma were also factors significantly associated with root resorption (p<0.05). There was no statistically significant difference in root resorption among the factors of gender, overbite, tongue-thrusting habit, types of malocclusion, and types of bracket. These results suggested that orthodontic treatment should be carefully performed in pre-treatment extraction patients who have pointed or dilacerated roots and need long treatment duration.

The genetics of shovel shape in maxillary central incisors in man.

PubMed

Blanco, R; Chakraborty, R

1976-03-01

From dental casts of 94 parent-offspring and 127 full-sib pairs, sampled from two Chilean populations, shovelling indices are computed to measure the degree of shovelling of maxillary central incisors quantitatively. Genetic correlations are computed to determine the role of genetic factors in explaining the variation in this trait. Assuming only hereditary factors to be responsible for the transmission of shovel shape, 68% of total variability is ascribed to the additive effect of genes.

Morphometric analysis of pulp size in maxillary permanent central incisors correlated with age: An indirect digital study.

PubMed

Ravindra, S V; Mamatha, G P; Sunita, J D; Balappanavar, Aswini Y; Sardana, Varun

2015-01-01

Teeth are hardest part of the body and are least affected by the taphonomic process. They are considered as one of the reliable methods of identification of a person in forensic sciences. The aim of the following study is to establish morphometeric measurements by AutoCad 2009 (Autodesk, Inc) of permanent maxillary central incisors in different age groups of Udaipur population. Hospital-based descriptive cross-sectional study carried out in Udaipur. A study was carried out on 308 subjects of both genders with the age range of 9-68 years. Standardized intra-oral radiographs were made by paralleling technique and processed. The radiographs were scanned and the obtained images were standardized to the actual size of radiographic film. This was followed by measuring them using software AutoCad 2009. F-test, post-hoc test, Pearson's correlation test. For left maxillary central incisor, the total pulp area was found to be of 38.41 ± 12.88 mm and 14.32 ± 7.04 mm respectively. For right maxillary central incisor, the total pulp size was 38.39 ± 14.95 mm and 12.35 ± 5 mm respectively. Males (32.50, 32.87 mm(2)) had more pulp area when compared with females (28.82, 30.05 mm(2)). There was a decrease in total pulp area with increasing age which may be attributed to secondary dentin formation.

Bilateral maxillary fused second and third molars: a rare occurrence

PubMed Central

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-01-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months. PMID:23222992

Bilateral maxillary fused second and third molars: a rare occurrence.

PubMed

Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

2012-12-01

This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months.

Comparison of Ferric Sulfate Combined Mineral Trioxide Aggregate Pulpotomy and Zinc Oxide Eugenol Pulpectomy of Primary Maxillary Incisors: An 18-month Randomized, Controlled Trial.

PubMed

Nguyen, Trang D; Judd, Peter L; Barrett, Edward J; Sidhu, Nicole; Casas, Michael J

2017-01-15

The purpose of this study was to compare outcomes and survival of ferric sulfate with mineral trioxide aggregate (FS+MTA) pulpotomy and root canal therapy (RCT) in carious vital primary maxillary incisors. In this parallel group noninferiority trial, asymptomatic carious vital primary incisors with pulp exposure in healthy 18- to 46-month-olds were allocated randomly to receive FS+MTA pulpotomy or RCT between September 2010 and September 2012. Each incisor was classified into one of the following radiographic outcomes: N (incisor without pathologic change); Po (pathologic change present, follow-up recommended); Px (pathologic change present, extract.) Clinical findings and incisor survival were secondary outcomes. Seventy subjects were enrolled with a total of 172 incisors. Twelve- and 18-month radiographic outcomes demonstrated no statistical difference between FS+MTA pulpotomy and RCT incisors for Px outcomes (P=0.38; odds ratio equals 0.60; 95 percent confidence interval equals 0.19 to 1.89; chi-square test). There was no statistical differences in clinical outcomes for FS+MTA pulpotomy and RCT at 12 and 18 months (P=0.51; Fisher's exact test) or survival for FS+MTA pulpotomy and RCT incisors (P=0.11; log-rank test). Ferric Sulfate with Mineral Trioxide Aggregate (FS+MTA) is an alternative to RCT for vital primary incisors.

A Rare Occurrence of Geminated-Taloned Maxillary Lateral Incisor

PubMed Central

Kayal, Vizhi G

2012-01-01

ABSTRACT The talon cusp is a developmental anomaly characterized by the presence of an accessory cusp like structure projecting from the cingulum area of the anterior teeth. Gemination is an anomaly caused by a single tooth germ that attempted to divide during its development. These developmental anomalies may cause clinical problems including esthetic impairment, pain, caries and tooth crowding. Co-occurrence of two anomalies in a teeth is rare. This paper presents an unusual case of talon cusp on geminated permanent lateral incisor. How to cite this article: Neeraja R, Kayal VG. A Rare Occurrence of Geminated-Taloned Maxillary Lateral Incisor. Int J Clin Pediatr Dent 2012;5(2):136-138. PMID:25206153

Crown-root Fracture Restoration on a Patient with Autism Spectrum Disorder.

PubMed

Perez, Edna; Behar-Horenstein, Linda S; Guelmann, Marcio

2016-09-01

Children with intellectual and physical disabilities including autism are susceptible to dental trauma as a sequela from falls due to poor muscular coordination. In addition, their altered muscle tonus often results in an open bite with labial flaring of the maxillary incisors and lip incompetence, predisposing these teeth to fractures. This case report describes an alternative approach of restoring a fractured maxillary permanent central incisor with a composite strip crown during surgical repositioning of the periodontium on an autistic patient. The prognosis of the incisor is guarded due to the probability of re-injury. However, the decision to maintain the tooth clinically was esthetically preferable in comparison to an extraction or decoronation.

Nasopalatine duct cyst mimicking an endodontic periapical lesion: a case report.

PubMed

Bains, Rhythm; Verma, Promila; Chandra, Anil; Tikku, A P; Singh, Nimisha

2016-01-01

Lesions of nonendodontic origin, such as nasopalatine or globulomaxillary cysts, may mimic periapical radiolucencies associated with pulpal pathosis, and incorrect diagnosis may lead to unnecessary endodontic treatment. Horizontal root fractures most commonly affect the maxillary central and lateral incisors. Prognosis depends largely on the level of fracture; fractures in the apical third have the best prognosis, and those in the cervical third have the worst. This case report discusses surgical and restorative management of a patient who had a nasopalatine cyst that had been misdiagnosed and treated as an endodontic lesion of the maxillary right central incisor as well as a midroot horizontal fracture of the adjacent lateral incisor.

Cleft-Related Orthognathic Surgery Based on Maxillary Vertical Lengthening of the Anterior Facial Height.

PubMed

Jeong, Woo Shik; Jeong, Hyung Hwa; Kwon, Soon Man; Koh, Kyung S; Choi, Jong Woo

2018-03-01

The conventional approach during orthognathic surgery for cleft-related deformities has focused largely on restoration of maxilla retrusion, using the maxillary advancement as a standard treatment objective. However, the authors thought that maxillary vertical shortening and deficient incisor show could be additional key elements of cleft-related deformities. Although slight vertical lengthening can be obtained with only maxillary advancement, it would not be enough to obtain satisfactory aesthetic results in terms of the anterior facial height. The authors hypothesized that vertical deficiency and anteroposterior maxillary retrusion exists in cleft-related deformities. Therefore, orthognathic surgery including intentional vertical lengthening and advancement would be better than the conventional simple advancement. A new approach was used to treat consecutive patients with dentofacial deformities between December of 2007 and December of 2016. Patients with cleft-related dentofacial deformities were included in the study. Forty-one patients with cleft-related dentofacial deformities were included. The distance from the nasion to the incisor tip was 76.70 mm; the angle of the lines connecting the sella, nasion, and point A was 74.03 degrees; and the incisor show was 1.02 mm. Corresponding measurements in 40 patients without clefts were 81.57 mm, 80.08 degrees, and 3.38 mm, respectively. Postoperatively, the average vertical lengthening achieved was 0.88 mm in the simple maxillary advancement group and 7.65 mm in the intentional vertical lengthening accompanied by maxillary advancement group. The authors' results suggest that simultaneous maxillary vertical lengthening with horizontal advancement is a viable approach to orthognathic surgery for cleft-related deformities, given the long-term stability of outcomes demonstrated in this study. Therapeutic, III.

Elastic band causing exfoliation of the upper permanent central incisors.

PubMed

Alves, Monica Ghislaine Oliveira; Kitakawa, Dárcio; Becker, Joao Batista Macedo; Brandão, Adriana Aigotti Haberbeck; Cabral, Luiz Antonio Guimarães; Almeida, Janete Dias

2015-01-01

Objective. This study reports a case in which elastic band use culminated in the loss of the incisors. Case Report. An 11-year-old white girl was seen complaining of pain, with purulent discharge and severe tooth mobility. The bone destruction detected radiographically in the region, despite its single location and absence in posterior quadrants of the maxilla and/or mandible, was similar to that observed in Langerhans cell disease. To our surprise, an elastic band involving the midportion of the roots of the two upper central incisors was found during biopsy. The debris was removed and a metal wire was placed in permanent maxillary right and left incisors. The patient was followed up, but no improvement in tooth mobility was observed. Bone loss increased, and internal resorption and root exposure occurred, which culminated in the extraction of permanent maxillary right and left incisors. Conclusion. The present case highlights the fact that professionals sometimes are confronted by anamnestic reports never seen before.

Enhanced BMP signaling results in supernumerary tooth formation in USAG-1 deficient mouse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murashima-Suginami, Akiko; Takahashi, Katsu; Sakata, Tomoko

2008-05-16

Uterine sensitization associated gene-1 (USAG-1) is a BMP antagonist, and also modulates Wnt signaling. We previously reported that USAG-1 deficient mice have supernumerary teeth. The supernumerary maxillary incisor appears to form as a result of the successive development of the rudimentary upper incisor. USAG-1 abrogation rescued apoptotic elimination of odontogenic mesenchymal cells. We confirmed that BMPs were expressed in both the epithelium and mesenchyme of the rudimentary incisor at E14 and E15. BMP signaling in the rudimentary maxillary incisor, assessed by expressions of Msx1 and Dlx2 and the phosphorylation of Smad protein, was significantly enhanced. Wnt signaling as demonstrated bymore » the nuclear localization of {beta}-catenin was also up-regulated. Inhibition of BMP signaling rescues supernumerary tooth formation in E15 incisor explant culture. Based upon these results, we conclude that enhanced BMP signaling results in supernumerary teeth and BMP signaling was modulated by Wnt signaling in the USAG-1 deficient mouse model.« less

Precise chronology of differentiation of developing human primary dentition.

PubMed

Hu, Xuefeng; Xu, Shan; Lin, Chensheng; Zhang, Lishan; Chen, YiPing; Zhang, Yanding

2014-02-01

While correlation of developmental stage with embryonic age of the human primary dentition has been well documented, the available information regarding the differentiation timing of the primary teeth was largely based on the observation of initial mineralization and varies significantly. In this study, we aimed to document precise differentiation timing of the developing human primary dentition. We systematically examined the expression of odontogenic differentiation markers along with the formation of mineralized tissue in each developing maxillary and mandibular teeth from human embryos with well-defined embryonic age. We show that, despite that all primary teeth initiate development at the same time, odontogenic differentiation begins in the maxillary incisors at the 15th week and in the mandibular incisors at the 16th week of gestation, followed by the canine, the first primary premolar, and the second primary premolar at a week interval sequentially. Despite that the mandibular primary incisors erupt earlier than the maxillary incisors, this distal to proximal sequential differentiation of the human primary dentition coincides in general with the sequence of tooth eruption. Our results provide an accurate chronology of odontogenic differentiation of the developing human primary dentition, which could be used as reference for future studies of human tooth development.

Camouflage treatment of skeletal Class III malocclusion with multiloop edgewise arch wire and modified Class III elastics by maxillary mini-implant anchorage.

PubMed

He, Shushu; Gao, Jinhui; Wamalwa, Peter; Wang, Yunji; Zou, Shujuan; Chen, Song

2013-07-01

To evaluate the effect of the multiloop edgewise arch wire (MEAW) technique with maxillary mini-implants in the camouflage treatment of skeletal Class III malocclusion. Twenty patients were treated with the MEAW technique and modified Class III elastics from the maxillary mini-implants. Twenty-four patients were treated with MEAW and long Class III elastics from the upper second molars as control. Lateral cephalometric radiographs were obtained and analyzed before and after treatment, and 1 year after retention. Satisfactory occlusion was established in both groups. Through principal component analysis, it could be concluded the anterior-posterior dental position, skeletal sagittal and vertical position, and upper molar vertical position changed within groups and between groups; vertical lower teeth position and Wits distance changed in the experimental group and between groups. In the experimental group, the lower incisors tipped lingually 2.7 mm and extruded 2.4 mm. The lingual inclination of the lower incisors increased 3.5°. The mandibular first molars tipped distally 9.1° and intruded 0.4 mm. Their cusps moved 3.4 mm distally. In the control group, the upper incisors proclined 3°, and the upper first molar extruded 2 mm. SN-MP increased 1.6° and S-Go/N-ME decreased 1. The MEAW technique combined with modified Class III elastics by maxillary mini-implants can effectively tip the mandibular molars distally without any extrusion and tip the lower incisors lingually with extrusion to camouflage skeletal Class III malocclusions. Clockwise rotation of the mandible and further proclination of upper incisors can be avoided. The MEAW technique and modified Class III elastics provided an appropriate treatment strategy especially for patients with high angle and open bite tendency.

[Autotransplantation of a maxillary incisor and orthodontic care: a case study].

PubMed

Charpentier, Valentine; Makaremi, Masrour; Brondeau, François de

2017-12-01

Severely impacted teeth with atypical root anatomy do not respond well to orthodontic traction after surgical exposure. Consequently, they are often removed, but replacing them with dental prostheses can prove difficult in patients who are still growing. Thus, autotransplantation seems to be the only way to preserve a natural tooth and the alveolar bone. An upper central incisor impacted in the region of the nasal cavities with an open apex was diagnosed in an 8.5-year-old female patient. The tooth displayed a curved root pressed against the maxillary cortical bone preventing orthodontic traction treatment. Through this clinical case involving autotransplantation of a maxillary incisor report and a review of the literature, this article explores the indications and exposes the different stages of this orthodontic-surgical protocol. In this case, autotransplantation enabled restoration of maxillary arch continuity. After two years of orthodontic treatment, the bone reconstruction of the extraction site was very satisfactory. The benefits of this technique and the precautions to be taken are discussed as well as the various protocols. The increasing success rate of this surgical procedure makes it possible to consider it as a protocol for the future. © EDP Sciences, SFODF, 2017.

Comparative study of dental anomalies assessed with panoramic radiographs of Down syndrome and non-Down syndrome patients.

PubMed

Mayoral-Trias, M A; Llopis-Perez, J; Puigdollers Pérez, A

2016-03-01

The aim of this study was to compare the prevalence of dental anomalies from panoramic radiographs of age-matched individuals with and without Down Syndrome (DS). This is a retrospective cross-sectional study. A group of 41 patients (19 female and 22 male) with Down Syndrome (DS), mean age 10.6 ± 1.4 and a control group of 42 non- DS patients (26 female and 16 male), mean age 11.1 ± 1.3 were studied. This study examined the medical history and a panoramic radiograph of each patient. The dental anomalies studied were agenesis of permanent teeth (except third molars), size and shape maxillary lateral anomalies and maxillary canine eruption path anomalies. The groups were compared using Mann-Whitney and Wilcoxon non-parametric tests (p<0.05). Rho Spearman correlation coefficient was applied for associations. Results Agenesis of one permanent tooth was found in 73.17% of DS subjects and two or more permanent teeth in more than 50% (p<0.001). Maxillary lateral incisor was the most frequently absent tooth followed by mandibular second premolar, mandibular lateral incisor, maxillary second premolar and mandibular central incisor. No significant differences were detected between maxilla and mandible on either side. No differences in gender were observed. Significant differences were found for size and shape anomalies of maxillary lateral incisors, as well as for canine eruption anomalies (p<0.05). No gender differences were observed for either variable. No association was found between these two variables in the DS group. More dental anomalies were present in the DS group than in the control group, which implied that DS patients need periodical dental and orthodontic supervision so as to prevent or control subsequent oral problems.

External apical root resorption in maxillary incisors in orthodontic patients: associated factors and radiographic evaluation

PubMed Central

Patanaporn, Virush; Janhom, Apirum; Korwanich, Narumanus

2012-01-01

Purpose This study was performed to evaluate the incidence and degree of external apical root resorption of maxillary incisors after orthodontic treatment and to evaluate particular associated factors related to external apical root resorption. Materials and Methods The records and maxillary incisor periapical radiographs of 181 patients were investigated. Crown and root lengths were measured and compared on the pre- and post-treatment periapical radiographs. Crown length was measured from the center of the incisal edge to the midpoint of the cemento-enamel junction (CEJ). Root length was measured from the CEJ midpoint to the root apex. A correction factor for the enlargement difference was used to calculate root resorption. Results The periapical radiographs of 564 teeth showed that the average root resorption was 1.39±1.27 (8.24±7.22%) and 1.69±1.14 mm (10.16±6.78%) for the maxillary central and lateral incisors, respectively. The results showed that the dilacerated or pointed roots, maxillary premolar extraction cases, and treatment duration were highly significant factors for root resorption (p<0.001). Allergic condition was a significant factor at p<0.01. Age at the start of treatment, large overjet, and history of facial trauma were also factors significantly associated with root resorption (p<0.05). There was no statistically significant difference in root resorption among the factors of gender, overbite, tongue-thrusting habit, types of malocclusion, and types of bracket. Conclusion These results suggested that orthodontic treatment should be carefully performed in pre-treatment extraction patients who have pointed or dilacerated roots and need long treatment duration. PMID:23071964

Premaxillary-maxillary suture asymmetry in a juvenile Gorilla. Implications for understanding dentofacial growth and development.

PubMed

Schwartz, J H

1983-01-01

A specimen of juvenile gorilla was found that had the premaxillary-maxillary suture coursing between the lateral deciduous incisor and deciduous canine on one side of the jaw, but between the central and lateral deciduous incisors on the other; in the latter, the suture also separates the alveolus of the lateral deciduous incisor from the crypt of the growing successional lateral incisor. Rather than dismiss this exception to the traditional dictum of tooth identification--which is based on the position to teeth relative to this suture--as some inconsequential anomaly, an attempt is made to understand how this can occur within the confines of present understanding of dentofacial growth and development and developmental theory. An hypothesis relating tooth and tooth class identification is presented in the context of ectomesenchymally predifferentiated stem progenitors and subsequent tooth class proliferation.

Morphometric analysis of pulp size in maxillary permanent central incisors correlated with age: An indirect digital study

PubMed Central

Ravindra, S. V.; Mamatha, G. P.; Sunita, J. D.; Balappanavar, Aswini Y.; Sardana, Varun

2015-01-01

Context: Teeth are hardest part of the body and are least affected by the taphonomic process. They are considered as one of the reliable methods of identification of a person in forensic sciences. Aim: The aim of the following study is to establish morphometeric measurements by AutoCad 2009 (Autodesk, Inc) of permanent maxillary central incisors in different age groups of Udaipur population. Setting and Design: Hospital-based descriptive cross-sectional study carried out in Udaipur. Materials and Methods: A study was carried out on 308 subjects of both genders with the age range of 9-68 years. Standardized intra-oral radiographs were made by paralleling technique and processed. The radiographs were scanned and the obtained images were standardized to the actual size of radiographic film. This was followed by measuring them using software AutoCad 2009. Statistical Analysis Used: F-test, post-hoc test, Pearson's correlation test. Results: For left maxillary central incisor, the total pulp area was found to be of 38.41 ± 12.88 mm and 14.32 ± 7.04 mm respectively. For right maxillary central incisor, the total pulp size was 38.39 ± 14.95 mm and 12.35 ± 5 mm respectively. Males (32.50, 32.87 mm2) had more pulp area when compared with females (28.82, 30.05 mm2). Conclusion: There was a decrease in total pulp area with increasing age which may be attributed to secondary dentin formation. PMID:26816461

Presurgical Unilateral Cleft Lip Anthropometrics and the Presence of Dental Anomalies.

PubMed

Antonarakis, Gregory S; Fisher, David M

2015-07-01

To investigate associations between cleft lip anthropometrics and dental anomalies in the permanent dentition in unilateral cleft lip patients. Retrospective cross-sectional study. Children with unilateral clefts of the lip, with or without cleft palate. Anthropometric lip measurements, made immediately prior to lip repair, were available for each patient. The presence of dental anomalies in the permanent dentition was assessed radiographically. The presence of associations between anthropometric lip measurements and prevalence rates of different dental anomalies were determined using logistic regression analyses. In the 122 included patients, the cleft lateral lip element was deficient in height in 80% and in transverse length in 84% of patients. Patients with more deficient cleft side lateral lip height and less deficient cleft side lateral lip transverse length were more likely to present with cleft side maxillary lateral incisor agenesis. On the other hand, patients with a less deficient cleft side lateral lip height and more deficient cleft side lateral lip transverse length were more likely to present with a cleft side supernumerary maxillary lateral incisor. When looking only at incomplete clefts, the cleft side lateral lip transverse length deficiency was more predictive of the presence of supernumerary maxillary lateral incisors (P = .030), while for complete clefts, the cleft side lateral lip height deficiency was more predictive of the presence of maxillary lateral incisor agenesis (P = .035). In patients with unilateral clefts, cleft lip anthropometrics have a predictive role in determining the occurrence of dental anomalies.

Assessment of the golden ratio in pleasing smiles.

PubMed

Nikgoo, Arash; Alavi, Kamiar; Alavi, Kavah; Mirfazaelian, Ali

2009-01-01

The golden ratio is a guideline to help harmoniously restore or replace missing teeth. However, this concept is controversial. This study assesses the validity of the golden ratio between the widths of the maxillary anterior teeth in individuals presenting with an attractive/nonattractive smile. A double-stage random cluster sample cross-sectional study included 903 students whose ages ranged from 18 to 30 years and met the inclusion criteria. Image-measurement software was used to assess the perceived mesiodistal widths of the maxillary anterior teeth on scanned photographs. A jury of two dental professionals, a portrait photographer, and a painter, along with the respective subject as the fifth judge, determined the attractiveness of each smile on a visual analog scale. The mean value determined whether an individual was allocated to the attractive or nonattractive smile group. Finally, the prevalence of the golden ratio was investigated in these two groups. Intraobserver correlation coefficient was 0.966. Cochran's chi-square test was used for data analysis. According to the jury, 143 individuals had an attractive smile and 289 had a nonattractive smile. Maxillary central to lateral incisor ratio showed the golden proportion in 50.3% of the students with an attractive smile as compared to 38.1% in the nonattractive smile group (P =.014). However, the golden ratio between the maxillary lateral incisors and the canines existed in only 16.8% of the individuals with an attractive smile as compared to 12.1% in the nonattractive smile group (P =.223). The golden ratio can be useful to achieve esthetic restorations of the maxillary central and lateral incisors. However, the golden ratio between the perceived widths of the maxillary lateral incisors to the canines does not seem to be decisive for an attractive smile and other factors should be considered. © 2009 BY QUINTESSENCE PUBLISHING CO, INC.

Anesthetic efficacy of the intraosseous injection in maxillary and mandibular teeth.

PubMed

Coggins, R; Reader, A; Nist, R; Beck, M; Meyers, W J

1996-06-01

The objective of this study was to determine the anesthetic efficacy of the intraosseous injection as a primary technique in human maxillary and mandibular teeth. Forty subjects received two sets of intraosseous injections with 1.8 ml of 2% lidocaine with 1:100,000 epinephrine at two successive appointments. The experimental teeth consisted of 40 groups of maxillary and mandibular first molars and lateral incisors. Each experimental tooth and adjacent teeth were tested with an electric pulp tester at 4-minute cycles for 60 minutes. Anesthetic success was defined as no subject response to the maximum output of the pulp tester (80 reading) for two consecutive readings. Anesthetic success occurred in 75% of mandibular first molars, in 93% of maxillary first molars, in 78% of mandibular lateral incisors, and in 90% of maxillary lateral incisors. Overall, for the intraosseous injection onset was immediate, the duration of pulpal anesthesia steadily declined over the 60 minutes, there was a 78% incidence of subjective increase in heart rate, the majority of the subjects had no pain or mild pain with perforation and solution deposition, and 3% of the subjects had slow healing perforation sites. The results of this study indicate that the intraosseous injection may provide pulpal anesthesia in 75% to 93% of noninflamed teeth as a primary technique. However, the duration of pulpal anesthesia declines steadily over an hour.

Assessment of gingival symmetry with digital measuring tools and its reproducibility.

PubMed

Wilson, David; Soileau, Kristi; Esquivel, Jonathan; Cordero, Adriana; Buchman, Wes; Maney, Pooja; Archontia Palaiologou, A

The aim of this study was to investigate the accuracy of digital measuring tools to measure the position of gingival zeniths and to assess its reproducibility between different examiners. A total of 108 subjects were photographed at the Louisiana State University School of Dentistry. The settings, positioning of the digital camera, and subjects' Frankfurt levels were standardized. A photograph was taken of the six anterior maxillary teeth of each subject, and their corresponding free gingival margins. Digital caliper measurements were taken intraorally from the zenith to the incisal edge of the right maxillary central incisor. A reference line was drawn across the screen on each image at the level of the zenith of tooth 8. Three calibrated examiners then measured the distance from the reference line to the zeniths of the other five anterior maxillary teeth. There was no statistically significant difference between the examiners regarding any of the measurements. Central incisors were at the same level in 84.24% of the subjects, and lateral incisors were within 0.5 mm of central incisors in only 58% of the subjects. Canine zeniths were within 0.5 mm of each other in 43% of the subjects. Only 28% of the subjects presented with zeniths of tooth 6 to tooth 11 within 0.5 mm of each other. Lateral incisors were at or beneath the line drawn from central incisors to cuspids in 90.8% of the subjects. Standardized digital photography taken with the aid of a stadiometer and used to evaluate esthetic parameters allowed for reproducible measurements.

Restoration of an intruded maxillary central incisor with a uniquely designed dowel and core restoration: a case report.

PubMed

Polat, Zelal Seyfioğlu; Tacir, Ibrahim Halil

2007-01-01

This article describes the restoration of an intruded root using a custom-made metal dowel and metal-ceramic veneer core restoration. The treatment plan for this patient consisted of restoring the missing esthetics and eliminating psychological trauma by utilizing the root of the intruded maxillary left central incisor to replace both missing central incisor crowns. This treatment will preserve space and bone until the patient is old enough for another prosthodontic restoration to be considered. As the lost fragments were not recovered, we considered this restoration of the intruded root to be the best therapeutic option, considering the effect on the patient's psyche. The patient was satisfied with the final result.

Gingival zenith positions and levels of the maxillary anterior dentition.

PubMed

Chu, Stephen J; Tan, Jocelyn H-P; Stappert, Christian F J; Tarnow, Dennis P

2009-01-01

The location of the gingival zenith in a medial-lateral position relative to the vertical tooth axis of the maxillary anterior teeth remains to be clearly defined. In addition, the apex of the free gingival margin of the lateral incisor teeth relative to the gingival zeniths of the adjacent proximal teeth remains undetermined. Therefore, this investigation evaluated two clinical parameters: (1) the gingival zenith position (GZP) from the vertical bisected midline (VBM) along the long axis of each individual maxillary anterior tooth; and (2) the gingival zenith level (GZL) of the lateral incisors in an apical-coronal direction relative to the gingival line joining the tangents of the GZP of the adjacent central incisor and canine teeth under healthy conditions. A total of 240 sites in 20 healthy patients (13 females, 7 males) with an average age of 27.7 years were evaluated. The inclusion patient criteria were absence of periodontal disease, gingival recession, or gingival hypertrophy as well as teeth without loss of interdental papillae, spacing, crowding, existing restorations, and incisal attrition. GZP dimensions were measured with calibrated digital calipers for each individual tooth and within each tooth group in a medial-lateral direction from the VBM. GZLs were measured in an apical-coronal direction from a tangent line drawn on the diagnostic casts from the GZPs of the adjacent teeth. This study demonstrated that all central incisors displayed a distal GZP from the VBM, with a mean average of 1 mm. Lateral incisors showed a deviation of the gingival zenith by a mean of 0.4 mm. In 97.5% of the canine population, the GZP was centralized along the long axis of the canine. The mean distance of the contour of the gingival margin in an apical-coronal direction of the lateral incisors (GZL) relative to gingival line joining the tangent of the adjacent central and canine GZPs was approximately 1 mm. This investigation revealed a GZP mean value of 1 mm distal from the VBM for the central incisor tooth group. The lateral incisors showed a mean average of 0.4 mm. The canine tooth group demonstrated almost no deviations of the GZP from the VBM. The GZL of the lateral incisors relative to the adjacent central incisor and canine teeth were more coronal by approximately 1 mm. These data could be used as reference points during esthetic anterior oral rehabilitation. The information presented in this article can be clinically applied to reestablish the proper intratooth GZPs of the maxillary anterior teeth during periodontal crown lengthening or root coverage procedures. In addition, the intra-arch gingival level of the lateral incisor gingival zenith relative to the adjacent central and canine teeth can be appropriately established.

The Shape of the Maxillary Central Incisors and Its Correlation with Maxillary Anterior Papillary Display: A Clinical Study.

PubMed

Nichani, Ashish S; Ahmed, Arshia Zainab; Ranganath, V

2016-01-01

The aim of this study was to define shapes of maxillary central incisors and determine their relationship with the visual display of interdental papillae during smiling. A sample of 100 patients aged 20 to 25 years were recruited. Photographs were taken and gingival angle, crown width (CW), crown length (CL), contact surface (CS), CW/CL ratio, CS/CL ratio, gingival smile line (GSL), and interdental smile line (ISL) were measured. The data showed an increase in GA leading to an increase in CW and CS/CL ratio. Women showed a higher percentage of papillary display compared with men. This study reinforces the proposed hypothesis that the shape of the teeth and papilla affect the periodontium.

Biologic restoration: a treatment option for reconstruction of anterior teeth.

PubMed

Babaji, Prashant; Khanna, Priyanka; S, Shankar; Chaurasia, Vishwajit Rampratap; Masamatti, Vinaykumar S

2014-11-01

Several procedures are advised to manage fractured anterior tooth structure using acrylic resin, composite restoration, ceramic or metal crown with ceramic facing. Biologic restoration is a procedure to restore fractured tooth structure with natural tooth material. In this in vitro case we have made an attempt for aesthetic rehabilitation of maxillary central incisor with similar biologic crown taken form extracted maxillary central incisor. It was observed that biologic restoration is an aesthetic, economical, fast and functional procedure which can be used as an alternative method to restore fractured primary or permanent anteriors.

Two- versus three-dimensional imaging in subjects with unerupted maxillary canines.

PubMed

Botticelli, Susanna; Verna, Carlalberta; Cattaneo, Paolo M; Heidmann, Jens; Melsen, Birte

2011-08-01

The aim of this study was to evaluate whether there is any difference in the diagnostic information provided by conventional two-dimensional (2D) images or by three-dimensional (3D) cone beam computed tomography (CBCT) in subjects with unerupted maxillary canines. Twenty-seven patients (17 females and 10 males, mean age 11.8 years) undergoing orthodontic treatment with 39 impacted or retained maxillary canines were included. For each canine, two different digital image sets were obtained: (1) A 2D image set including a panoramic radiograph, a lateral cephalogram, and the available periapical radiographs with different projections and (2) A 3D image set obtained with CBCT. Both sets of images were submitted, in a single-blind randomized order, to eight dentists. A questionnaire was used to assess the position of the canine, the presence of root resorption, the difficulty of the case, treatment choice options, and the quality of the images. Data analysis was performed using the McNemar-Bowker test for paired data, Kappa statistics, and paired t-tests. The findings demonstrated a difference in the localization of the impacted canines between the two techniques, which can be explained by factors affecting the conventional 2D radiographs such as distortion, magnification, and superimposition of anatomical structures situated in different planes of space. The increased precision in the localization of the canines and the improved estimation of the space conditions in the arch obtained with CBCT resulted in a difference in diagnosis and treatment planning towards a more clinically orientated approach.

Reactive correction of a maxillary incisor in single-tooth crossbite following periodontal therapy.

PubMed

Huang, Chih-Hao; Brunsvold, Michael A

2005-05-01

The reactive correction of a single tooth anterior crossbite following periodontal therapy is described. This case report provides new information regarding correction of a crossbite relationship and con- firms existing reports of tooth movement following periodontal therapy. A 39-year-old woman in good general health presented with a history of recurrent periodontal abscesses of a maxillary incisor. Probing depths of the abscessed tooth ranged from 5 to 12 mm, and class 1 mobility was noted. Radiographs revealed that the tooth had previously been treated endodontically. The patient's periodontal diagnosis was generalized chronic moderate to severe periodontitis. Treatment considerations were complicated by a single-tooth crossbite relationship of the involved incisor and clinical evidence that the periodontal abscess communicated with an apical infection. Treatment of the abscess consisted of cause-related therapy, bone grafting, and occlusal adjustment. Five months after surgical treatment, an edge-to-edge incisal relationship was observed, the first indicator of tooth movement. Further correction to a normal incisal relationship resulted 1 year after modification of the proximal contact. At this time, there was normal probing depth with only slight recession and mobility. Bone fill was radiographically noted. It appears that some cases of maxillary incisor crossbite that are complicated by periodontal disease may be corrected, without orthodontic appliances, following periodontal treatment.

[Dental anomalies in Chinese children with complete unilateral cleft lip and palate].

PubMed

Fan, Xin-xin; Li, Jing; Ge, Li-hong; Ma, Lian

2011-05-01

To investigate the prevalence of dental anomalies in Chinese children with complete unilateral cleft lip and palate (UCLP). Dental histories and radiographs of 244 Chinese children with UCLP were collected. The diagnosis of dental anomalies was based on panoramic radiographs before alveolar bone grafting. All patients were over 8 years old. In the UCLP group, 66.8% of the patients was presented with hypodontia. The maxillary lateral incisors were the most common teeth affected, followed by maxillary second premolars, mandibular incisors and mandibular second premolars. A total of 33.6% the patients was presented with dental malformation, most were microdontic laterel incisors. A total of 4.9% the patients was presented with hyperdontia. The supernumerary teeth were more frequently found in the cleft region. The prevalence of missing maxillary lateral incisor in the noncleft side was statistically different between genders, which was higher in male (P < 0.050). This group of Chinese children with UCLP demonstrated significantly higher prevalence of hypodontia, hyperdontia, and malformation on the cleft side than on the noncleft side (P < 0.01). Hypodontia is the most common type of dental anomalies. The prevalence of dental anomalies is higher in the UCLP patients than in the normal population. Dental anomalies occur more frequently on the cleft side than on the noncleft side.

Esthetic evaluation of dental and gingival asymmetries.

PubMed

Fernandes, Liliana; Pinho, Teresa

2015-06-01

The aim of this study was to determine which smile asymmetries were less esthetic, dental or gingival. Laypeople (297), generalists (223), prosthodontists (50) and orthodontists (49), evaluated the esthetics of digitally-modified images taken from the same frontal intra-oral photograph, using the same lips, simulating upper maxillary midline shift, occlusal plane inclination, asymmetric incisal edge and asymmetric gingival migration. The images were later paired into 3 groups. The only ones considered esthetic were the asymmetric incisal edge of the 0.5 mm shorter upper central incisor and the asymmetric gingival migration (2 mm) of the upper central incisor. In the paired images, upper maxillary midline shift vs. occlusal plane inclination, the former was rated less esthetic, while in the asymmetric incisal edge vs. asymmetric gingival migration pair, the latter was considered to be less esthetic. Laypeople and generalists consider smiles more attractive. The only images considered esthetic were the asymmetric incisal edge of the central incisor shorter by 0.5 mm and the 2 mm asymmetric gingival migration of the upper central incisor. In the horizontal plane (maxillary midline shift vs. occlusal plane cant), the dental asymmetries were considered less esthetic than the gingival asymmetries. However, in the vertical plane (asymmetric incisal edge vs. asymmetric gingival migration) the opposite was recorded. Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.

A comparison of root surface temperatures using different obturation heat sources.

PubMed

Lee, F S; Van Cura, J E; BeGole, E

1998-09-01

This study compared root surface temperatures produced during warm vertical obturation using the System B Heat Source (SB), the Touch 'n Heat device (TH), and a flame-heated carrier (FH). The root canals of 30 maxillary incisor, premolar, and mandibular incisor teeth were prepared; divided into three groups; and obturated using each heat source. A thermocouple placed 2 mm below the cementoenamel junction transferred the temperature rise on the external root surface to a digital thermometer. SB surface temperature rise was < 10 degrees C for all experimental teeth. TH temperature rise in maxillary incisors and premolars was < 10 degrees C; however, > 10 degrees C was observed for mandibular incisors. FH produced a > 10 degrees C surface temperature rise in all experimental teeth. The critical level of root surface heat required to produce irreversible bone damage is believed to be > 10 degrees C. The findings of this study suggest that warm vertical condensation with the SB should not damage supporting periradicular tissues. However, caution should be used with TH and FH on mandibular incisors.

The characteristics and distribution of dental anomalies in patients with cleft.

PubMed

Wu, Ting-Ting; Chen, Philip K T; Lo, Lun-Jou; Cheng, Min-Chi; Ko, Ellen Wen-Ching

2011-01-01

Dental anomalies associated with different severities of cleft lip and palate have been rarely reported. This retrospective study investigates the characteristics of dental anomalies associated with different types of cleft, and compares the dental anomaly traits based on sex and severity of cleft. Cleft patients born in 1995 with qualified diagnostic records from 7 to 11 years were included for evaluation. Records were retrieved from database of Chang Gung Craniofacial Center, including panoramic radiographs and intraoral photographs. In total, 196 patients with complete records were included in the evaluation. This study compares the dental anomalies associated with each type of cleft. The frequency of dental anomalies in the maxillary incisor area in the cleft palate (CP) group (20%) was significantly lower than that in other groups. The frequency of missing maxillary lateral incisors (MLIs) increased as the cleft severity increased. Supernumerary teeth and missing lower incisors exhibited the opposite trend. No sexual dimorphism appeared in terms of the frequencies of peg laterals and missing MLIs. The distribution patterns of missing MLIs and peg laterals in males, but not in females, were consistent for the three types of unilateral clefts. Regarding the characteristics of dental anomalies among the three unilateral clefts, missing MLIs, supernumerary teeth, and missing lower incisors were found to be related to cleft severity. The maxillary lateral incisor was the most affected tooth in the cleft area. The frequency of missing MLIs and peg laterals was not sexual dimorphic, but the distribution pattern was different between the sexes.

Skeletal anchorage for orthodontic correction of severe maxillary protrusion after previous orthodontic treatment.

PubMed

Tanaka, Eiji; Nishi-Sasaki, Akiko; Hasegawa, Takuro; Nishio, Clarice; Kawai, Nobuhiko; Tanne, Kazuo

2008-01-01

The correction of a severe maxillary protrusion in an adult by distal movement of the maxillary molars has been one of the most difficult biomechanical problems in orthodontics. This article reports on the treatment of an adult case of severe maxillary protrusion and a large overjet treated with a skeletal anchorage system. A female patient, age 22 years and 3 months, complained of the difficulty of lip closure due to severe maxillary protrusion with a gummy smile. Overjet and overbite were +7.6 mm and -0.9 mm, respectively. She had a history of orthodontic treatment in which her maxillary first premolars were extracted. In order to conduct distal movement of the maxillary molars, anchor plates were placed in the zygomatic process. After achieving a Class I molar relationship, retraction and intrusion of the maxillary incisors were performed. After a 2-year treatment, an acceptable occlusion was achieved with a Class I molar relationship. Her convex facial profile with upper lip protrusion was considerably improved, and the lips showed less tension in lip closure. After a 2-year retention period, an acceptable occlusion was maintained without recurrence of maxillary protrusion, indicating a stability of the occlusion. The result of this treatment indicated that skeletal anchorage is of great importance as a remedy for achieving intrusion and retraction of the maxillary incisors in cases of severe maxillary protrusion with a patient who had previous orthodontic treatment.

Endodontic-periodontal management of two rooted maxillary lateral incisor associated with complex radicular lingual groove by using spiral computed tomography as a diagnostic aid: a case report.

PubMed

Gandhi, A; Kathuria, A; Gandhi, T

2011-06-01

To present the successful endodontic and periodontal management of a two rooted maxillary lateral incisor tooth with a complex radicular lingual groove and severe periodontal destruction using spiral computed tomography as a diagnostic aid. A 30-year-old male patient presented with a chief complaint of mobility and discharge of pus in an upper front tooth. Clinical examination revealed a sinus tract on the labial gingival surface and a 10-mm-deep periodontal pocket associated with maxillary left lateral incisor tooth. On the lingual side, a groove emerging from cingulum, continuing mesioapically down the lingual aspect of tooth was found. Intraoral periapical radiographs demonstrated a lateral periodontal defect around the mesial aspect and a diffuse radiolucency at the apex of maxillary left lateral incisor tooth. The sinus tract was traced with gutta-percha to the maxillary left lateral incisor that showed an accessory root surrounded by a large radiolucent area. A spiral computed tomographic scan for better understanding of the complicated root canal morphology of the tooth was performed. Based on the clinical, radiographic and spiral computed tomographic findings, a diagnosis of an endo-perio lesion in tooth 22 was made. Management consisted of conventional root canal treatment, radiculoplasty, root resection of accessory root and surgical curettage of the periodontal defect. Follow-up with radiographic examination at 3 months and 1 year was performed. At 1-year recall, the patient was asymptomatic, there was no evidence of the sinus tract and a 3-mm nonbleeding pocket was present in relation to tooth 22. Progression of hard tissue healing was observed in the periapical radiograph taken 1 year postoperatively. The key to achieving favourable results in this particular type of developmental anomaly is accurate diagnosis and treatment planning. The health of the periapical osseous tissues appears to be the provital factor for tooth retention. A favourable outcome can only be achieved with a comprehensive treatment approach that effectively manages all local factors that are contributing to the disease process. © 2011 International Endodontic Journal.

The effects of alveolar bone loss and miniscrew position on initial tooth displacement during intrusion of the maxillary anterior teeth: Finite element analysis

PubMed Central

Cho, Sun-Mi; Choi, Sung-Hwan; Sung, Sang-Jin; Yu, Hyung-Seog

2016-01-01

Objective The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss. PMID:27668194

Relationship between crown-root angulation (collum angle) of maxillary central incisors in Class II, division 2 malocclusion and lower lip line.

PubMed

Srinivasan, Bhadrinath; Kailasam, Vignesh; Chitharanjan, Arun; Ramalingam, Arthi

2013-01-01

The present study aimed to measure the magnitude of the collum angle (crown-root angulation) of maxillary central incisors present in Class II, division 2 malocclusion and to relate the changes in its magnitude with variations in the lower lip line. A set of 120 conventional lateral cephalograms were selected and divided into three groups of 40 each based on the type of malocclusion presented: Class II, division 2 (group 1); Class II, division 1 (group 2); and Class I (group 3). The collum angle of the maxillary central incisor was measured, and the lower lip line was recorded. Analysis of variance (ANOVA) revealed that the mean collum angle was statistically significantly different in the three groups. The mean collum angle was greatest in Class II, division 2 malocclusion (group 1). The mean collum angles were 3.24 ± 4.69 degrees, 0.95 ± 1.06 degrees, and 1.05 ± 1.50 degrees in groups 1, 2, and 3 respectively. In χ ² test comparison of the location of the lower lip line (incisal, middle, or apical third of the central incisor) among the three groups, the lower lip line was found to contact the middle third of the central incisor most frequently in Class II, division 2 malocclusion. ANOVA followed by Tukey honestly significant difference (HSD) test showed that the mean collum angle is significantly increased when the lower lip is in the middle third (P < .05) of the central incisor. Variations in magnitude of the collum angle with the change in the lower lip line suggest a probable etiologic role of the lower lip line in the development of the collum angle.

The effectiveness of pendulum, K-loop, and distal jet distalization techniques in growing children and its effects on anchor unit: A comparative study.

PubMed

Marure, Pravinkumar S; Patil, Raju Umaji; Reddy, Sumitra; Prakash, Amit; Kshetrimayum, Nillachandra; Shukla, Rajeevkumar

2016-01-01

A common strategy to correct Class II malocclusions using a nonextraction protocol in children is to move the maxillary molars distally using molar distalization appliances, which usually derive their anchorage from maxillary premolars, causing mesialization of premolars and protrusion of incisors. To evaluate the skeletal, dental and soft tissue changes produced by three different distalizing appliances, namely, pendulum, K-loop, and distal jet appliances. Sixty-six children of mean age 14.13 years requiring molar distalization were divided into three groups: Group I (pendulum appliance), Group II (K-loop), and Group III (distal jet). Lateral cephalometric films were taken before and after 5 months of molar distalization and following cephalometric parameters were used to assess the effects of maxillary molar distalization, namely, anteroposterior skeletal (SNA/SNB/ANB), vertical skeletal (face height ratio/Frankfort-mandibular plane [FMA]/angle formed between Maxillary plane & Mandibular plane (MM)), interdental (overjet/overbite), maxillary dentoalveolar, and soft tissue parameters. There was no significant age difference between the three groups. In overall treatment changes among the three groups, the Anteroposterior skeletal changes were not statistically significant, vertically FMA angle increased by 1.79° ± 2.25° and overbite reduced by 2.38 ± 1.83 mm. The maxillary first molars were distalized by an average of 4.70 ± 3.01 mm (Upper 6 [U6] to pterygoid vertical [PTV]). The maxillary central incisor labial tipping increased to an average of 1.61 ± 2.73 mm and cant of upper lip increased by 3.40° ± 5.88° are statistically significant (P < 0.05). All three distalization techniques in growing children produced significant effects on anchor unit. There was an increase in FMA angle, significant bite opening, proclination of the maxillary incisors and increase in the cant of the upper lip.

Prevalence and distribution of dental anomalies: a comparison between maxillary and mandibular tooth agenesis.

PubMed

Al-Abdallah, Mariam; AlHadidi, Abeer; Hammad, Mohammad; Al-Ahmad, Hazem; Saleh, Raja'

2015-11-01

The aim of this study was to compare the pattern and prevalence of associated dental anomalies between maxillary and mandibular tooth agenesis (hypodontia). A sample of 3315 dental patients, aged 8.6 to 25.4 years, was surveyed for tooth agenesis (excluding third molars): 106 subjects were diagnosed with maxillary hypodontia (group 1) and 70 with mandibular hypodontia (group 2). Both groups were examined for the following dental anomalies: retained deciduous molars, infraocclusion of deciduous molars, impaction, microdontia of maxillary lateral incisors, supernumerary teeth, transposition, transmigration, and ectopic eruption of the permanent molars. For statistical testing, the chi-square test (P <0.05) was used to compare the occurrences of these anomalies among the groups. We found that 77.5% of the patients in the mandibular hypodontia group had at least 1 dental anomaly compared with 49.5% in the maxillary hypodontia group (P <0.0001). The only dental anomaly with a significantly increased prevalence in the maxillary hypodontia group compared with the mandibular hypodontia group was microdontia of the maxillary lateral incisors (groups 1, 46.7%; group 2, 12.9%; P <0.0001). On the other hand, the prevalences of retained deciduous molars (group 1, 9.4%; group 2, 60.0%), infraoccluded deciduous molars (group 1, 0.9%; group 2, 7.1%), and impacted teeth (group 1, 22.6%; group 2, 38.6%) were significantly higher in the mandibular hypodontia group. The prevalences of supernumerary teeth, transposition, transmigration, and ectopic eruption of permanent molars were low and not significantly different between the groups. Tooth agenesis isolated to the maxilla is frequently associated with microdontia of the maxillary lateral incisors, whereas tooth agenesis isolated to the mandible is frequently associated with retained deciduous molars, infraoccluded deciduous molars, and impacted teeth. The results of this study may provide additional evidence supporting the field-specific genetic control theory for dental development in both jaws. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Esthetic rehabilitation of complicated crown fractures utilizing rapid orthodontic extrusion and two different restoration modalities.

PubMed

Milardovic Ortolan, Sladana; Strujic, Mihovil; Aurer, Andrej; Viskic, Josko; Bergman, Lana; Mehulic, Ketij

2012-01-01

This case report describes the management of a crown-root fractured maxillary right central incisor and a crown fractured maxillary left central incisor using two different techniques. A complex procedure was designed to manage this case including orthodontic extrusion to move the fracture line above the alveolar bone and surgical recontouring of the altered gingival margin. Finally, the right incisor was restored prosthodontically. Prosthetic treatment was based on performing a post and core, and all-ceramic crown on the extruded tooth. The left, less-damaged incisor was restored directly using composite resin. The treatment resulted in good esthetics and secured periodontal health. This case report demonstrates that a multidisciplinary treatment approach is a reliable and predictable option to save a tooth. How to cite this article: Ortolan SM, Strujic M, Aurer A, Viskic J, Bergman L, Mehulic K. Esthetic Rehabilitation of Complicated Crown Fractures Utilizing Rapid Orthodontic Extrusion and Two Different Restoration Modalities. Int J Clin Pediatr Dent 2012;5(1):64-67.

Camouflage of Severe Skeletal Class II Gummy Smile Patient Treated Nonsurgically with Mini Implants

PubMed Central

Qamruddin, Irfan; Shahid, Fazal; Alam, Mohammad Khursheed; Zehra Jamal, Wafa

2014-01-01

Skeletal class II has always been a challenge in orthodontics and often needs assistance of surgical orthodontics in nongrowing patients when it presents with severe discrepancy. Difficulty increases more when vertical dysplasia is also associated with sagittal discrepancy. The advent of mini implants in orthodontics has broadened the spectrum of camouflage treatment. This case report presents a 16-year-old nongrowing girl with severe class II because of retrognathic mandible, and anterior dentoalveolar protrusion sagittally and vertically resulted in severe overjet of 13 mm and excessive display of incisors and gums. Both maxillary central incisors were trimmed by general practitioner few years back to reduce visibility. Treatment involved use of micro implant for retraction and intrusion of anterior maxillary dentoalveolar segment while lower incisors were proclined to obtain normal overjet, and overbite and pleasing soft tissue profile. Smile esthetics was further improved with composite restoration of incisal edges of both central incisors. PMID:25548686

Surgical management of impacted incisors in associate with supernumerary teeth: a combine case report of spontaneous eruption and orthodontic extrusion.

PubMed

Das, D; Misra, J

2012-01-01

Maxillary permanent incisors impaction is not a frequent case in dental practice, but its treatment is challenging because of its importance to facial esthetics. Supernumerary teeth are the main cause of impaction of upper incisors. Supernumerary teeth when present can cause both esthetic and pathologic problems. Early detection of such teeth is most important if complications are to be avoided. In this reported case, the orthopantamogram of a 9-year-old boy revealed two impacted supernumerary teeth in the maxillary anterior region, which was interfering with the eruption of the permanent central incisors. The impacted supernumerary teeth were surgically removed, 11 was repositioned in the arch as it was situated very high in the arch, close to the nasal floor. Twenty-one erupted spontaneously but orthodontic force was applied over 11 to bring it into the occlusion and alignment was achieved with 0.014 mm NiTi wire.

Radiographic assessment of dental anomalies in patients with ectopic maxillary canines.

PubMed

Sørensen, Helle Budtz; Artmann, Lone; Larsen, Helle Juul; Kjaer, Inger

2009-03-01

The aetiology of palatally and labially located ectopic maxillary canines is multifactorial. Accordingly, early prediction of this eruptional disturbance is in most cases not possible. The purpose of this study was to analyse dental deviations in cases with either palatal or labial ectopic canines. Panoramic and intra-oral radiographs from 50 patients with palatally located (38 females and 12 males) and 19 patients with labially located ectopic canines (11 females and 8 males), aged 10 years, 2 months-18 years, 1 month, were analysed. Dental deviations registered were crown and root malformations, agenesis, and eruption deviations. Registrations were performed in the maxillary incisor field and in the dentition in general. The study documented that palatally as well as labially located ectopic canines can occur in dentitions without other dental deviations. Dental deviations occurred in approximately two-thirds of all cases, more often in females and in cases with palatally located canines. More than half of the females with palatally located canines had deviations in the maxillary incisors and in the dentition in general. Dental deviations may be considered a risk factor for maxillary canine ectopia. Early identification of patients at risk and appropriate interceptive treatment may reduce ectopic eruption of maxillary canines.

Unusually large complex odontoma in maxillary sinus associated with unerupted tooth. Report of case and review of literature.

PubMed

Singer, Steven R; Mupparapu, Muralidhar; Milles, Maano; Rinaggio, Joseph; Pisano, Dominic; Quaranta, Patrick

2007-01-01

An unusual case of a large complex odontoma with an associated impacted tooth is presented. Odontomas are hamartomatous growths of enamel, dentin, cementum and pulp tissue. Although they are usually tooth-sized or smaller, occasionally, the complex variant can exhibit considerable growth, as was seen in the case presented here. It occupied most of the maxillary sinus and displaced the floor of the orbit and the medial and posterior walls of the left maxillary sinus. Panoramic radiographs, as well as axial and coronal CT studies, showed the extent of the lesion in various dimensions. A differential diagnosis of various calcifying tumors was formulated on the basis of these findings. The lesion was surgically excised, and histologic analysis confirmed the radiographic impression. Although odontomas of this magnitude are rare, this case demonstrates the value of imaging, radiographic histopathologic diagnosis and surgical treatment planning prior to any definitive treatment.

Comparison of incisor inclination in patients with Class III malocclusion treated with orthognathic surgery or orthodontic camouflage.

PubMed

Troy, Beth A; Shanker, Shiva; Fields, Henry W; Vig, Katherine; Johnston, William

2009-02-01

Reports comparing Class III patients treated by camouflage and those treated by orthognathic surgery are not numerous. The purpose of this study was to compare the dental and skeletal values of Class III patients treated with these methods against normative data and over the course of treatment. Thirty-three surgical and 39 camouflage Class III patients were selected from a graduate orthodontic clinic and regional private practices, and lateral cephalograms were digitized. Skeletal and dental values were obtained, and mean and efficacy evaluations referenced to ethnic norms were calculated. At pretreatment, the surgery patients had more severe skeletal discrepancies and more compensated incisors. During presurgical orthodontic treatment, most of the surgery group's mandibular incisors were significantly decompensated, although half of the maxillary incisors remained compensated. The surgical move improved 90% of these patients but to only 60% to 65% of the norm. The camouflage group was compensated at pretreatment, and they became more compensated in the end. After treatment, there were no differences between the incisor positions of the 2 groups. There was no statistical difference in incisor inclination and position between the Class III surgical and camouflage groups after treatment; there was a significant difference in the pretreatment and posttreatment incisor inclination and position compared with normative values for both the surgical and the camouflage groups; the maxillary and mandibular incisors were not adequately decompensated in the surgical group, but significant improvement in mandibular incisor position and axial inclination was achieved presurgically. The outcome of the surgical correction was limited by the inadequate presurgical orthodontic incisor decompensation, and orthodontic compensation of incisors occurred postsurgically to achieve an optimal occlusal result.

Long-term maxillomandibular skeletal and dental changes in children with cleft lip and palate after maxillary distraction.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2006-09-01

Long-term skeletal and dental changes were examined in 8 children with cleft lip and palate who underwent maxillary distraction to allow the maxilla to catch up to their mandibular growth at the treatment point. Changes in the overjet (OJ), overbite (OB), and positions of the anterior nasal spine (ANS), upper incisors (U1), pogonion (Pog), and lower incisors (L1) were measured on preoperative to 36 months postoperative lateral-cephalograms. In most of the children, the long-term changes after the maxillary distraction resulted in an inferior growth of the maxilla and anteroinferior growth of the mandible. This seems to suggest that maxillary distraction performed during childhood needs considerable overcorrection. However, if the maxilla is distracted to an adult position during childhood, the masticatory functions of the children will markedly deteriorate until their jaws grow. Therefore, we believe that one goal of maxillary distraction during childhood can be to allow the maxilla to catch up to the mandibular growth of the children at the treatment point.

Conservative Management of Dens Evaginatus: Report of Two Unusual Cases

PubMed Central

Vijaykumar, S; Tenny, J; Ravi, GR

2010-01-01

ABSTRACT Dens evaginatus (DE) is a rare developmental anomaly characterized by presence of an extra cusp arising from occlusal or lingual surfaces. Isolated occurrence or concomitant presence of DE with other dental anomalies has been reported. DE commonly affects permanent teeth and is rarely seen in primary dentition. Treatment may be conservative or radical. This article presents two unusual cases of concomitant occurrence of a supernumerary tooth and DE affecting maxillary deciduous lateral incisor and conservative management of DE occurring concurrently with a possible Oehler’s type I invagination in maxillary permanent lateral incisor. PMID:27507925

External apical root resorption in maxillary root-filled incisors after orthodontic treatment: a split-mouth design study.

PubMed

Llamas-Carreras, José María; Amarilla, Almudena; Espinar-Escalona, Eduardo; Castellanos-Cosano, Lizett; Martín-González, Jenifer; Sánchez-Domínguez, Benito; López-Frías, Francisco Javier

2012-05-01

The purpose of this study was to compare, in a split mouth design, the external apical root resorption (EARR) associated with orthodontic treatment in root-filled maxillary incisors and their contralateral teeth with vital pulps. The study sample consisted of 38 patients (14 males and 24 females), who had one root-filled incisor before completion of multiband/bracket orthodontic therapy for at least 1 year. For each patient, digital panoramic radiographs taken before and after orthodontic treatment were used to determine the root resortion and the proportion of external root resorption (PRR), defined as the ratio between the root resorption in the endodontically treated incisor and that in its contralateral incisor with a vital pulp. The student's t-test, chi-square test and logistic regression analysis were used to determine statistical significance. There was no statistically significant difference (p > 0.05) between EARR in vital teeth (1.1 ± 1.0 mm) and endodontically treated incisors (1.1 ± 0.8 mm). Twenty-six patients (68.4%) showed greater resorption of the endodontically treated incisor than its homolog vital tooth (p > 0.05). The mean and standard deviation of PPR were 1.0 ± 0.2. Multivariate logistic regression suggested that PRR does not correlate with any of the variables analyzed. There was no significant difference in the amount or severity of external root resorption during orthodontic movement between root-filled incisors and their contralateral teeth with vital pulps.

Estimating the color of maxillary central incisors based on age and gender

PubMed Central

Gozalo-Diaz, David; Johnston, William M.; Wee, Alvin G.

2008-01-01

Statement of problem There is no scientific information regarding the selection of the color of teeth for edentulous patients. Purpose The purpose of this study was to evaluate linear regression models that may be used to predict color parameters for central incisors of edentulous patients based on some characteristics of dentate subjects. Material and methods A spectroradiometer and an external light source were set in a noncontacting 45/0 degree (45-degree illumination and 0-degree observer) optical configuration to measure the color of subjects’ vital craniofacial structures (maxillary central incisor, attached gingiva, and facial skin). The subjects (n=120) were stratified into 5 age groups with 4 racial groups and balanced for gender. Linear first-order regression was used to determine the significant factors (α=.05) in the prediction model for each color direction of the color of the maxillary central incisor. Age, gender, and color of the other craniofacial structures were studied as potential predictors. Final predictions in each color direction were based only on the statistically significant factors, and then the color differences between observed and predicted CIELAB values for the central incisors were calculated and summarized. Results The statistically significant predictors of age and gender accounted for 36% of the total variability in L*. The statistically significant predictor of age accounted for 16% of the total variability in a*. The statistically significant predictors of age and gender accounted for 21% of the variability in b*. The mean ΔE (SD) between predicted and observed CIELAB values for the central incisor was 5.8 (3.2). Conclusions Age and gender were found to be statistically significant determinants in predicting the natural color of central incisors. Although the precision of these predictions was less than the median color difference found for all pairs of teeth studied, and may be considered an acceptable precision, further study is needed to reduce this precision to the limit of detection. Clinical Implications Age is highly correlated with the natural color of the central incisors. When age increases, the central incisor becomes darker, more reddish, and more yellow. Also, the women subjects in this study had lighter and less yellow central incisors than the men. PMID:18672125

Gingival Zenith Positions and Levels of Maxillary Anterior Dentition in Cases of Bimaxillary Protrusion: A Morphometric Analysis.

PubMed

Gowd, Snigdha; Shankar, T; Chatterjee, Suravi; Mohanty, Pritam; Sahoo, Nivedita; Baratam, Srinivas

2017-08-01

To investigate the two clinical parameters, such as gingival zenith positions (GZPs) and gingival zenith levels (GZLs), of maxillary anterior dentition in bimaxillary protrusion cases and collate it with severiety of crown inclination. Gingival zenith position and GZL in 40 healthy patients (29 females and 11 males) with an average age of 21.5 years were assessed. Inclusion criteria involved absence of periodontal diseases, Angle's class I molar relationship, and upper anterior proclination within 25 to 45° based on Steiner's analysis; exclusion criteria included spacing, crowding, anterior restoration and teeth with incisor attrition or rotation. The GZP was evaluated using digital calipers from voxel-based morphometry (VBM), and GZL was assessed from the tangent drawn from GZP of central incisor and canines to the linear vertical distance of GZP of lateral incisor. All the central incisors showed a GZP distal to VBM with a mean average of 1 mm. Severe proclination between 40 and 45° showed a statistically significant variation. Lateral incisors displayed a mean of 0.5 mm deviation of GZP from the vertically bisected midline. In 80% of canine population, GZP was centralized. We conclude that the degree of proclination of maxillary anterior dentition was correlated to the gingival contour in bimaxillary cases. The investigation revealed that there is a variation in the location of GZP as the severity of proclination increases. This study highlights the importance of microesthetics in fixed orthodontic treatment. The gingival contour should be unaltered while retraction during management of bimaxillary protrusion.

Oxygen Saturation in Dental Pulp of Permanent Teeth: Difference between Children/Adolescents and Adults.

PubMed

Stella, João Paulo Fragomeni; Barletta, Fernando Branco; Giovanella, Larissa Bergesch; Grazziotin-Soares, Renata; Tovo, Maximiano Ferreira; Felippe, Wilson Tadeu; Estrela, Carlos

2015-09-01

The objective of this study was to use pulse oximetry to measure oxygen saturation in permanent maxillary central incisors with normal pulp in 2 different age groups: children/adolescents and adults. Blood oxygen saturation levels were measured using a pulse oximeter in 110 maxillary central incisors of 57 individuals, in 1 of 2 possible age bands, as follows: 28 children/adolescents (7-13 years old) and 29 adults (22-36 years old). The following factors were also analyzed: (1) heart rate (beats/min); (2) oxygen saturation rate measured at the patient's index finger, also using a pulse oximeter; (3) tooth crown dimensions; and (4) the time taken by the oximeter to provide a reading. The mean oxygen saturation level in normal central incisors was higher among children/adolescents (84.35%) than adults (77.88%, P = .003). Oxygen saturation rates measured at the patients' fingers were not correlated with saturation obtained at the teeth (r = 0.10). There was no correlation between oxygen saturation readings and tooth dimensions (buccal surface area), heart rate, or oximeter reading time (P > .05). Oxygen saturation values measured in maxillary central incisors using a pulse oximeter revealed differences between children/adolescents and adults, showing that children/adolescents have higher oxygen saturation levels. There was no correlation between oxygen saturation levels in patients' fingers and values from their teeth or between oxygen saturation readings from central incisors and tooth dimensions (buccal surface), heart rate, or oximeter reading time. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Influence of magnification and superimposition of structures on cephalometric diagnosis.

PubMed

Paula, Leonardo Koerich de; Solon-de-Mello, Priscilla de Almeida; Mattos, Claudia Trindade; Ruellas, Antônio Carlos de Oliveira; Sant'Anna, Eduardo Franzotti

2015-01-01

The purpose of this study was to assess the influence of magnification and superimposition of structures on CBCT-generated lateral cephalometric radiographs (LCR) using different segments of the cranium. CBCT scans of 10 patients were selected. Four LCR were generated using Dolphin Imaging(r) software: full-face, right side, left side and center of the head. A total of 40 images were imported into Radiocef Studio 2(r), and the angles of the most common cephalometric analyses were traced by the same observer twice and within a 10-day interval. Statistical analyses included intraexaminer agreement and comparison between methods by means of intraclass correlation coefficient (ICC) and Bland-Altman agreement tests. Intraexaminer agreement of the angles assessed by ICC was excellent (> 0.90) for 83% of measurements, good (between 0.75 and 0.90) for 15%, and moderate (between 0.50 and 0.75) for 2% of measurements. The comparison between methods by ICC was excellent for 68% of measurements, good for 26%, and moderate for 6%. Variables presenting wider confidence intervals (> 6o) in the Bland-Altman tests, in intraexaminer assessment, were: mandibular incisor angle, maxillary incisor angle, and occlusal plane angle. And in comparison methods the variables with wider confidence interval were: mandibular incisor, maxillary incisor, GoGn, occlusal plane angle, Frankfort horizontal plane (FHP), and CoA. Superimposition of structures seemed to influence the results more than magnification, and neither one of them significantly influenced the measurements. Considerable individual variability may occur, especially for mandibular and maxillary incisors, FHP and occlusal plane.

Masking of Enamel Fluorosis Discolorations and Tooth Misalignment With a Combination of At-Home Whitening, Resin Infiltration, and Direct Composite Restorations.

PubMed

Perdigão, J; Lam, V Q; Burseth, B G; Real, C

This clinical report illustrates a conservative technique to mask enamel discolorations in maxillary anterior teeth caused by hypomineralization associated with enamel fluorosis and subsequent direct resin composite to improve the anterior esthetics. The treatment consisted of at-home whitening with 10% carbamide peroxide gel with potassium nitrate and sodium fluoride in a custom-fitted tray to mask the brown-stained areas, followed by resin infiltration to mask the white spot areas. An existing resin composite restoration in the maxillary right central incisor was subsequently replaced after completion of the whitening and resin infiltration procedures, whereas the two misaligned and rotated maxillary lateral incisors were built up with direct resin composite restorations to provide the illusion of adequate arch alignment, as the patient was unable to use orthodontic therapy.

An analysis of maxillary anterior teeth: facial and dental proportions.

PubMed

Hasanreisoglu, Ufuk; Berksun, Semih; Aras, Kerem; Arslan, Ilker

2005-12-01

The size and form of the maxillary anterior teeth are important in achieving pleasing dental and facial esthetics. However, little scientific data have been defined as criteria for evaluating these morphological features. This study analyzed the clinical crown dimensions of maxillary anterior teeth to determine whether consistent relationships exist between tooth width and several facial measurements in a subset of the Turkish population. Full-face and anterior tooth images of 100 Turkish dental students viewed from the front and engaged in maximum smiling were recorded with digital photography under standardized conditions. Gypsum casts of the maxillary arches of the subjects were also made. The dimensions of the anterior teeth, the occurrence of the golden ratio, the difference between the actual and perceived sizes, and the relationship between the anterior teeth and several facial measurements by gender were analyzed using the information obtained from both the computer images and the casts. One-sample, 2-sample, and paired t tests, and repeated-measures analysis of variance and Duncan multiple-range tests were performed to analyze the data (alpha=.05). The dimensions of the central incisors (P<.05) and canines (P<.01) varied by gender. The existence of the so-called "golden proportion" for the maxillary anterior teeth as a whole was not found. Significant differences emerged when the mean ratios between various perceived widths were compared with their ideal golden ratios (P<.01). Proportional relationships between the bizygomatic width and the width of the central incisor, and the intercanine distance and the interalar width in women were observed. The maxillary central incisor and canine dimensions of men were greater than those of women in the Turkish population studied, with the canines showing the greatest gender variation. Neither a golden proportion nor any other recurrent proportion for all anterior teeth was determined. Bizygomatic width and interalar width may serve as references for establishing the ideal width of the maxillary anterior teeth, particularly in women.

Managing malocclusion in the mixed dentition: six keys to success part 2.

PubMed

Fleming, Padhraig; Johal, Ama; DiBiase, Andrew T

2008-12-01

Regular recall strategies ensure the general dental practitioner is ideally placed to recognize, manage and correct many occlusal problems in the mixed dentition phase. The first paper focused on recognition of normal and abnormal occlusal development, cessation of habits and correction of crossbites. This paper considers management of leeway space, highlights the importance of palpation of unerupted maxillary canines, and discusses the need for judicious removal of primary teeth (Keys 4-6).

Ultrasonic irrigation of a maxillary lateral incisor with perforation of the apical third of the root.

PubMed

Tsurumachi, Tamotsu; Takita, Toshiya; Hashimoto, Kazuhiro; Katoh, Takeshi; Ogiso, Bunnai

2010-12-01

We describe the successful use of a combination of nonsurgical root canal treatment and ultrasonic irrigation for collaborative management of a maxillary left lateral incisor with perforation of the apical third of the root. During the endodontic treatment procedure, the ultrasonically activated tip was used for intracanal irrigation. The area of perforation in the apical third of the root and the main root canal space were obturated with gutta-percha and root canal sealer, using a lateral condensation method. A follow-up clinical and radiographic examination at 5 years after treatment showed an asymptomatic tooth with excellent osseous healing.

Recovery of multiple impacted maxillary teeth in a hyperdivergent Class I patient using Temporary Skeletal Anchorage Devices and augmented corticotomy.

PubMed

Kim, Kyung A; Hwang, Hyeon-Shik; Chung, Kyu-Rhim; Kim, Seong-Hun; Nelson, Gerald

2018-01-01

Treatment of multiple impacted teeth is challenging. Three-dimensional treatment planning can help in delivering a better outcome. This case report presents a patient with an incomplete dental transposition between the canine and lateral incisor of the maxillary right side associated with the impaction of a dilacerated right central incisor. Using a two-stage surgical exposure and augmented corticotomy, the patient's occlusion and smile esthetics were significantly improved, and Class I occlusal relationships with optimal overjet and overbite were achieved after 50 months of orthodontic treatment. Thirty-month posttreatment records revealed a stable result.

Orthodontic exposure of multiple lmpactions: a case report.

PubMed

Munda-Lacson, Maridin C; Venugopal, Adith

2014-01-01

There are rare cases of impacted permanent central incisors with dilacerations, a dental deformity characterized by pronounced angulations of the longitudinal tooth axis. Impaction of maxillary canines is an orthodontic anomaly that causes facial and dentoalveolar system problems, both functional and esthetic. A combination of surgery and orthodontics is important in bringing impacted teeth to their ideal position in the dental arch. This is a case report of a 10-year-old patient with impacted and dilacerated right central incisor and impacted left maxillary canine, following surgical exposure and appropriate orthodontic traction, the impacted teeth were surgically exposed and aligned into the dental arch.

Comparison of Parental Satisfaction with Three Tooth-Colored Full-Coronal Restorations in Primary Maxillary Incisors.

PubMed

Salami, A; Walia, T; Bashiri, R

2015-01-01

To evaluate and compare the parental satisfaction among resin composite strip crown, preveneered stainless steel crown (PVSSC) and the newly introduced pre-fabricated primary zirconia crown for restoring maxillary primary incisors. A prospective clinical study on 39 children with carious or traumatized primary maxillary incisors. They were randomly and equally distributed in three groups and received one of the full-coronal restorations. Children were recalled to evaluate and compare parental satisfaction about performance of crowns after one year through a questionnaire. Parents were satisfied with all three tooth colored full-coronal restoration techniques. A significant relationship was found between colour of PVSSC (p=0.003) and durability of resin strip crowns (p=0.009) with the overall parental satisfaction levels. Parents who gave poor ratings in these two variables however rated their overall acceptance levels as being satisfied. Parental overall satisfaction was highest for zirconia primary crowns followed by resin composite strip crowns and lowest satisfaction was reported for pre-veneered SSCs. Parents were least satisfied with durability of resin composite strip crowns and colour of pre-veneered stainless steel crowns. However, this did not affect their overall satisfaction with these crowns.

Interdisciplinary treatment of an adult with a unilateral cleft lip and palate

PubMed Central

Al-Ruwaithi, Moatazbellah M; Al-Fraidi, Ahmad A; Al-Tamimi, Tawfiq S; Al-Shehri, Ali S

2014-01-01

The management of cleft lip and palate (CLP) requires an interdisciplinary team providing comprehensive care. The present report presents an interdisciplinary approach for the care of a cleft patient. A 17-year-old male patient presented with a a chief complaint of “unpleasant appearance of my teeth” and a history of surgical repair of unilateral CLP on the left side. He presented with Class III molar relationships, Class II canine relationships, crossbite related to maxillary right first premolar and lateral incisor, severe maxillary and mandibular crowding, maxillary anterior tooth size deficiency, congenitally missing upper left lateral incisor. Patient was treated with a pre-adjusted edgewise appliance in conjunction with extraction of multiple teeth and distalization of the lower right first molar using a temporary anchorage device. In addition, alveolar bone graft and implant were placed to restore the missing upper left lateral incisor and a final esthetic work was performed for anterior teeth. The case was finished with Class I molar and canine relationships, minimal overjet and overbite. Total treatment time was about 31 months with satisfactory results. Post-treatment evaluation after 8 months showed stable results. PMID:24987659

Congenitally Missing Maxillary Lateral Incisors: Functional and Periodontal Aspects in Patients Treated with Implants or Space Closure and Tooth Re-Contouring

PubMed Central

Marchi, Luciana Manzotti De; Pini, Núbia Inocencya Pavesi; Hayacibara, Roberto Massayuki; Silva, Rafael Santos; Pascotto, Renata Corrêa

2012-01-01

To evaluate functional and periodontal aspects in patients with unilateral or bilateral congenitally missing maxillary lateral incisors, treated with either implants or space closure and tooth re-contouring. The sample consisted of 68 volunteers, divided into 3 groups: SCR - space closure and tooth re-contouring with composite resin (n = 26); SOI – implants placed in the area of agenesis (n = 20); and CG - control group (n = 22). A modified Helkimo questionnaire and the Research Diagnostic Criteria for Temporomandibular Disorders were used by a single, previously calibrated evaluator to assess signs and symptoms of temporomandibular joint disorder. The periodontal assessment involved the following aspects: plaque index, bleeding upon probing, pocket depth greater than 3 mm, gingival recession, abfraction, periodontal biotype and papilla index. The data were analyzed using Fisher's exact test and the nonparametric Mann-Whitney and Kruskal-Wallis tests (α=.05). No differences in periodontal status were found between treatments. None of the groups were associated with signs and symptoms of temporomandibular joint disorder. Both treatment alternatives for patients with congenitally missing maxillary lateral incisors were satisfactory and achieved functional and periodontal results similar to those of the control group. PMID:23346262

A Prospective, Randomized, Double-Blind Comparison of 2% Mepivacaine With 1 : 20,000 Levonordefrin Versus 2% Lidocaine With 1 : 100,000 Epinephrine for Maxillary Infiltrations

PubMed Central

Lawaty, Ingrid; Drum, Melissa; Reader, Al; Nusstein, John

2010-01-01

The purpose of this prospective, randomized, double-blind crossover study was to compare the anesthetic efficacy of 2% mepivacaine with 1 : 20,000 levonordefrin versus 2% lidocaine with 1 : 100,000 epinephrine in maxillary central incisors and first molars. Sixty subjects randomly received, in a double-blind manner, maxillary central incisor and first molar infiltrations of 1.8 mL of 2% mepivacaine with 1 : 20,000 levonordefrin and 1.8 mL of 2% lidocaine with 1 : 100,000 epinephrine at 2 separate appointments spaced at least 1 week apart. The teeth were electric pulp tested in 2-minute cycles for a total of 60 minutes. Anesthetic success (obtaining 2 consecutive 80 readings with the electric pulp tester within 10 minutes) was not significantly different between 2% mepivacaine with 1 : 20,000 levonordefrin and 2% lidocaine with 1 : 100,000 epinephrine for the central incisor and first molar. However, neither anesthetic agent provided an hour of pulpal anesthesia. PMID:21174567

In vitro assessment of pulp chamber temperature of different teeth submitted to dental bleaching associated with LED/laser and halogen lamp appliances.

PubMed

Torres, Carlos Rocha Gomes; Caneppele, Taciana Marco Ferraz; Arcas, Felipe Carlos Dias; Borges, Alessandra Buhler

2008-01-01

This study sought to assess the pulp chamber temperature in different groups of human teeth that had been bleached using hydrogen peroxide gel activated with halogen lamps or hybrid LED/laser appliances. Four groups of ten teeth (maxillary central incisors, mandibular incisors, mandibular canines, and maxillary canines) were used. A digital thermometer with a K-type thermocouple was placed inside pulp chambers that had been filled with thermal paste. A 35% hydrogen peroxide-based red bleaching gel was applied to all teeth and photocured for a total of three minutes and 20 seconds (five activations of 40 seconds each), using light from an LED/laser device and a halogen lamp. The temperatures were gauged every 40 seconds and the data were analyzed by three-way ANOVA, followed by Tukey's test. Regardless of the light source, statistically significant differences were observed between the groups of teeth. The mean temperature values (+/- SD) were highest for maxillary central incisors and lowest for mandibular canines. The halogen lamp appliance produced more pulp chamber heating than the LED/laser appliance. The increase in irradiation time led to a significant increase in temperature.

External apical root resorption in maxillary root-filled incisors after orthodontic treatment: A split-mouth design study

PubMed Central

Amarilla, Almudena; Espinar-Escalona, Eduardo; Castellanos-Cosano, Lizett; Martín-González, Jenifer; Sánchez-Domínguez, Benito; López-Frías, Francisco J.

2012-01-01

Introduction: The purpose of this study was to compare, in a split mouth design, the external apical root resorption (EARR) associated with orthodontic treatment in root-filled maxillary incisors and their contralateral teeth with vital pulps. Methodology: The study sample consisted of 38 patients (14 males and 24 females), who had one root-filled incisor before completion of multiband/bracket orthodontic therapy for at least 1 year. For each patient, digital panoramic radiographs taken before and after orthodontic treatment were used to determine the root resortion and the proportion of external root resorption (PRR), defined as the ratio between the root resorption in the endodontically treated incisor and that in its contralateral incisor with a vital pulp. The student’s t-test, chi-square test and logistic regression analysis were used to determine statistical significance. Results: There was no statistically significant difference (p > 0.05) between EARR in vital teeth (1.1 ± 1.0 mm) and endodontically treated incisors (1.1 ± 0.8 mm). Twenty-six patients (68.4%) showed greater resorption of the endodontically treated incisor than its homolog vital tooth (p > 0.05). The mean and standard deviation of PPR were 1.0 ± 0.2. Multivariate logistic regression suggested that PRR does not correlate with any of the variables analyzed. Conclusions: There was no significant difference in the amount or severity of external root resorption during orthodontic movement between root-filled incisors and their contralateral teeth with vital pulps. Key words:Endodontics, orthodontics, root canal treatment, root resorption. PMID:22143731

The effect of canine characteristics and symmetry on perceived smile attractiveness when canine teeth are substituted for lateral incisors.

PubMed

Rayner, Wendy Jane; Barber, Sophy K; Spencer, Richard James

2015-03-01

To determine the effect of canine tooth characteristics and symmetry on perceived smile attractiveness when maxillary canine teeth are substituted for missing lateral incisors. Prospective, cross-sectional study. Non-clinical study undertaken from Leeds Dental Institute, UK. A composite full-face image of a smiling female was used to display various dentitions; a control image with an 'ideal' smile, plus six further images substituting the maxillary lateral incisors with canine teeth either unilaterally or bilaterally with varying size, shape, colour and gingival margin level. The seven images were shown to orthodontists (n = 30), dentists (n = 30) and lay people (n = 30) who were asked to rate smile attractiveness using a visual analogue scale. Dental professionals rated smiles with canine substitution for lateral incisor agenesis to be significantly less attractive than an ideal smile unless the substituted canine teeth approximated the lateral incisor in terms of size, shape, colour and gingival margin. Lay people did not find smiles where canine teeth were substituted for lateral incisors significantly more or less attractive than an ideal smile regardless of the canine tooth characteristics. Dental professionals were significantly more perceptive than lay people to the deviation from ideal smile aesthetics due to canine substitution. Smiles with unilateral canine substitution were not found to be significantly less attractive than bilateral canine substitution by all groups. Canine characteristics and observer status will affect how canine substitution for lateral incisor agenesis is viewed in terms of aesthetic outcome.

Long-term skeletal and dental changes in patients with cleft lip and palate after maxillary distraction: a report of three cases treated with a rigid external distraction device.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2005-04-01

We examined long-term skeletal and dental changes in three patients with cleft lip and palate who underwent maxillary distraction using a rigid external distraction device. Two were children, and one was an adult. Changes in the overjet (OJ), overbite (OB), and positions of the anterior nasal spine (ANS), upper incisors (U1), pogonion (Pog), and lower incisors (L1) were measured on preoperative to 36 months postoperative lateral-cephalograms. In the adult, the positions of all examination points were relatively stable from 6 to 36 months postoperatively, and the OJ and OB were maintained at over 2 mm at 36 months. In the children, the positions of ANS and U1 changed inferiorly, Pog and L1 changed anteroinferiorly, and OJ and OB tended to decrease from 6 to 36 months postoperatively. Long-term skeletal and dental stability following maxillary distraction was relatively well maintained in the adult patient. In the children, the maxillomandibular growth was observed after maxillary distraction, but the mandibular overgrowth might have been inhibited by the correction of class III dentoskeletal deformity resulting from the maxillary distraction.

Morphological features of the maxillary incisors roots and relationship with neighbouring anatomical structures: possible implications in endodontic surgery.

PubMed

Taschieri, S; Weinstein, T; Rosano, G; Del Fabbro, M

2012-05-01

The purpose of this study was to investigate the relationship between the root apex of the upper incisors and neighbouring anatomical structures as well as the morphology of the root-end foramen after apicoectomy. Fifty-seven patients requiring endodontic surgical treatment for a maxillary anterior root were enrolled. A preoperative diagnostic computed tomography (CT) scan was analysed to determine: the distance between the anterior wall of the nasopalatine duct and the central (CI-ND) incisor root 4mm from the apex; and the distance between the floor of the nasal cavity and the tip of either the central (CI-NF) or the lateral (LI-NF) incisor root. After apicoectomy, root-end foramen endoscopic pictures were taken in order to characterize their morphology. Fifty-nine central and 26 lateral incisors were evaluated. The average CI-ND was 4.71 ± 1.26 (SD) mm. The average CI-NF was 10.62 ± 2.25 mm. The average LI-NF was 13.05 ± 2.43 mm. The foramen shape after apicoectomy was ovoid to circular in about 90% of cases in both central and lateral incisors. A sound knowledge of the anatomical relationships at the surgical site is essential for the clinician to perform a safe endodontic surgical procedure. Copyright © 2011 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Prevalence of dental anomalies in patients with cleft lip and palate.

PubMed

Eslami, Neda; Majidi, Mohammad Reza; Aliakbarian, Majid; Hasanzadeh, Nadia

2013-09-01

The aim of the present study was to investigate the prevalence of dental anomalies in a group of patients with cleft lip and palate (CL/P) in the northeast of Iran. Ninety-one patients referring to the Cleft Lip and Palate Clinic of Mashhad Dental School were enrolled and classified into right CL/P, left CL/P, and bilateral CL/P groups. Photographs, dental casts, and panoramic and periapical radiographs were retrieved, and dental anomalies were recorded. χ test was used to analyze the frequency of dental anomalies according to type of cleft and sex. Missing maxillary lateral incisors was the most frequent dental anomaly, which was slightly higher in the bilateral group (61.1%). There were significantly more cases of missing lateral incisors outside the cleft area in right CL/P (P = 0.015). Peg lateral incisors were observed in 33.3% of bilateral CL/P compared with 28% of right and 23.3% of left unilateral cases. The sample presented rotations of central incisors in the cleft area in 33.3% of bilateral clefts. In unilateral clefts, it occurred more frequently in the right side (48%). Sexual dimorphism appeared only for maxillary central incisor rotation in the cleft area, which showed significantly greater frequency in females (P = 0.025). Transposition of maxillary canine and first premolars was found in 5.5% of bilateral, 8% of right, and 3.3% of left unilateral clefts. The prevalence of dental anomalies in the studied sample seems to be higher than that reported in the normal population. More anomalies were observed at the cleft side. The frequency of most anomalies was not significantly different between the 2 sexes.

A Prospective, Randomized, Double-Blind Comparison of 2% Lidocaine With 1 : 100,000 Epinephrine, 4% Prilocaine With 1 : 200,000 Epinephrine, and 4% Prilocaine for Maxillary Infiltrations

PubMed Central

Katz, Steven; Drum, Melissa; Reader, Al; Nusstein, John; Beck, Mike

2010-01-01

Abstract The purpose of this prospective, randomized, double-blind crossover study was to evaluate the anesthetic efficacy of 2% lidocaine with 1 : 100,000 epinephrine, 4% prilocaine with 1 : 200,000 epinephrine, and 4% prilocaine in maxillary lateral incisors and first molars. Sixty subjects randomly received, in a double-blind manner, maxillary lateral incisor and first molar infiltrations of 1.8 mL of 2% lidocaine with 1 : 100,000 epinephrine, 1.8 mL of 4% prilocaine with 1 : 200,000 epinephrine, and 1.8 mL of 4% prilocaine, at 3 separate appointments spaced at least 1 week apart. The teeth were pulp-tested in 3-minute cycles for a total of 60 minutes. Anesthetic success (ie, obtaining 2 consecutive 80 readings with the electric pulp tester) and onset of pulpal anesthesia were not significantly different between 2% lidocaine with 1 : 100,000 epinephrine, 4% prilocaine with 1 : 200,000 epinephrine, and 4% prilocaine for the lateral incisor and first molar. For both lateral incisor and first molar, 4% prilocaine with 1 : 200,000 epinephrine and 2% lidocaine with 1 : 100,000 epinephrine were equivalent for incidence of pulpal anesthesia. However, neither anesthetic agent provided an hour of pulpal anesthesia. For both lateral incisor and first molar, 4% prilocaine provided a significantly shorter duration of pulpal anesthesia compared with 2% lidocaine with 1 : 100,000 epinephrine and 4% prilocaine with 1 : 200,000 epinephrine. PMID:20553134

Contour changes in human alveolar bone following tooth extraction of the maxillary central incisor.

PubMed

Li, Bei; Wang, Yao

2014-12-01

The purpose of this study was to apply cone-beam computed tomography (CBCT) to observe contour changes in human alveolar bone after tooth extraction of the maxillary central incisor and to provide original morphological evidence for aesthetic implant treatment in the maxillary anterior area. Forty patients were recruited into the study. Each patient had two CBCT scans (CBCT I and CBCT II), one taken before and one taken three months after tooth extraction of maxillary central incisor (test tooth T). A fixed anatomic reference point was used to orient the starting axial slice of the two scans. On three CBCT I axial slices, which represented the deep, middle, and shallow layers of the socket, labial and palatal alveolar bone widths of T were measured. The number of sagittal slices from the start point to the pulp centre of T was recorded. On three CBCT II axial slices, the pulp centres of extracted T were oriented according to the number of moved sagittal slices recorded in CBCT I. Labial and palatal alveolar bone widths at the oriented sites were measured. On the CBCT I axial slice which represented the middle layer of the socket, sagittal slices were reconstructed. Relevant distances of T on the sagittal slice were measured, as were the alveolar bone width and tooth length of the opposite central incisor. On the CBCT II axial slice, which represented the middle layer of the socket, relevant distances recorded in CBCT I were transferred on the sagittal slice. The height reduction of alveolar bone on labial and palatal sides was measured, as were the alveolar bone width and tooth length of the opposite central incisor at the oriented site. Intraobserver reliability assessed by intraclass correlation coefficients (ICCs) was high. Paired sample t-tests were performed. The alveolar bone width and tooth length of the opposite central incisor showed no statistical differences (P<0.05). The labial alveolar bone widths of T at the deep, middle, and shallow layers all showed statistical differences. However, no palatal alveolar bone widths showed any statistical differences. The width reduction of alveolar bone was 1.2, 1.6, and 2.7 mm at the deep, middle, and shallow layers, respectively. The height reduction of alveolar bone on labial and palatal sides of T both showed statistical differences, which was 1.9 and 1.1 mm, respectively.

Association between third molar agenesis patterns and agenesis of other teeth in a Japanese orthodontic population.

PubMed

Endo, Saori; Sanpei, Sugako; Ishida, Rieko; Sanpei, Shinya; Abe, Ryota; Endo, Toshiya

2015-01-01

The purpose of this study was to investigate the patterns of third molar agenesis and incidence of agenesis of other permanent teeth in a Japanese orthodontic patient group. A total of 417 Japanese subjects (134 males and 283 females) with agenesis of one or more third molars were divided into four groups according to the agenesis pattern, and 874 other Japanese subjects (302 males and 572 females) without third molar agenesis were assigned to a control group. Panoramic radiographs and medical and dental records were used to examine for tooth agenesis. The Chi-square test and odds ratio were used to make statistical comparisons. The prevalence of third molar agenesis worked out at 32.3% with no statistically significant gender difference. A high prevalence rate of agenesis of third molars, unilateral or bilateral, could be considered characteristic of the Japanese orthodontic population. Significant increases in occurrence of oligodontia, and unilateral or bilateral agenesis of other teeth, including maxillary lateral incisors and maxillary and mandibular second premolars, were observed in all or almost all of the third molar agenesis groups, compared with the controls. A significantly increased prevalence rate of mandibular lateral incisor agenesis was observed in almost all of the third molar agenesis groups. The Japanese patients with third molar agenesis had a significantly increased occurrence of oligodontia, and unilateral or bilateral agenesis of maxillary and mandibular lateral incisors and second premolars, except for bilateral agenesis of mandibular lateral incisors.

Supernumerary Teeth in the Maxillary Anterior Region: The Dilemma of Early Versus Late Surgical Intervention.

PubMed

Sarne, Ofer; Shapira, Yehoshua; Blumer, Sigalit; Finkelstein, Tamar; Schonberger, Shirley; Bechor, Naomi; Shpack, Nir

Supernumerary teeth are the most common developmental dental anomalies in the maxillary anterior region causing interference to the developing permanent incisors resulting in poor dental and facial esthetics. Two different opinions regarding the timing for surgical removal of the supernumerary teeth are presented. In this case report, three brothers with supernumerary teeth in the maxillary anterior region are presented, their surgical and orthodontic management and outcome are discussed.

Molar-incisor-hypomineralisation (MIH). Retrospective clinical study in Greek children. I. Prevalence and defect characteristics.

PubMed

Lygidakis, N A; Dimou, G; Briseniou, E

2008-12-01

This was to evaluate the prevalence and the clinical characteristics of MIH in a group of Greek children. During the years 2003--2005, all MIH cases diagnosed according to the recently set criteria were selected from the new patients clinic of a Community Dental Centre for Children (Athens). Age, gender and teeth involved were recorded. The severity of MIH was determined collectively by dividing the affected teeth in two groups; a) mild defect (demarcated opacities) and b) moderate/severe defect (enamel breakdown and atypical restorations). Evaluation of the distribution of the affected teeth within MIH cases was performed in a separate group of 225 affected children aged 8-12 years with their entire 12 'index' teeth erupted. From the 3,518, 5.5 to 12 year old children that were examined, there were 360 (10.2%) children with MIH, 211 (58.6%) females and 149 (41.4%) males, with 1,926 affected teeth, 1,231 molars and 695 incisors. In the molars group, maxillary molars were more frequently affected (87.8/90.3%) than mandibular (81.7/82.2%). In the central incisor group, maxillary teeth were also more frequently affected (50/55%) than mandibular (24.4/25%), while laterals were the least affected. In all there were 37.9% molars with moderate/severe defects as compared with 4.9% incisors, the remaining 62.1% and 95.1% respectively being mild. The various associations between the affected teeth were evaluated in the sub-group of 225 MIH children with all 'index' teeth erupted (1,286 affected teeth, 776 molars and 510 incisors), with mean number of affected teeth per child being 5.7; separately for molars 3.4 and for incisors 2.2. In these cases 28.4% of the children had only molars affected and 71.6% had both molars and incisors. In descending order the associations of affected teeth more frequently found were: 4 molars/2 incisors (23.5%), 4 molars/4 incisors (16.8%), 4 molars alone (15.1%) and 2 molars alone (9.7%), the remaining being much less. As age increased the clinical severity of the affected teeth became more prevalent (p=0.0001), and when the total number of affected teeth was assessed the likelihood of having severe defect was also increased (p=0.001). The prevalence of the defect in the present study was 10.2% with maxillary teeth being more frequently affected. Severity increased with age. Mild defects were much more frequent, particularly in incisors. The total number of teeth affected and the most frequently found associations were, 4 molars/2 incisors, 4 molars/4 incisors, 4 molars alone and 2 molars alone.

Maxillary premolar resorption by canines: three case reports.

PubMed

Cooke, M E; Nute, S J

2005-05-01

Three unusual cases of maxillary premolar root resorption are reported. Three teenage patients were referred to the orthodontic department for management of ectopic maxillary canines. Radiographic examination revealed unilateral premolar root resorption in all three patients. This represents an unusual finding. Whereas the prevalence of maxillary lateral incisor root resorption secondary to palatally ectopic canines has been reported, the prevalence of premolar root resorption is unknown. This report discusses the findings in the context of the available literature. The postulated aetiology and the need for early diagnosis are highlighted.

Proportions of maxillary anterior teeth relative to each other and to golden standard in tabriz dental faculty students.

PubMed

Parnia, Fereydoun; Hafezeqoran, Ali; Mahboub, Farhang; Moslehifard, Elnaz; Koodaryan, Rodabeh; Moteyagheni, Rosa; Saleh Saber, Fariba

2010-01-01

Various methods are used to measure the size and form of the teeth, including the golden pro-portion, and the width-to-length ratio of central teeth, referred to as the golden standard. The aim of this study was to eval-uate the occurrence of golden standard values and golden proportion in the anterior teeth. Photographs of 100 dentistry students (50 males and 50 females) were taken under standard conditions. The visible widths and lengths of maxillary right and left incisors were calculated and the ratios were compared with golden standard. Data was analyzed using SPSS 14 software. Review of the results of the means showed statistically significant differences between the width ratio of right lateral teeth to the central teeth width with golden proportion (P<0.001). Likewise, the difference was significant for the left side, too (P<0.001). Test results of mean differences showed that the mean difference between proportion of right laterals to centrals with golden proportion was significant (P<0.001). The difference was significant for the left side, too (P<0.001). As a result, there is no golden proportion among maxillary incisors. The review of results of mean differences for single samples showed that the mean differences between the proportion of width-to-length of left and right central teeth was statistically significant by golden standard (P<0.001). Therefore, considering the width-to-length proportion of maxillary central teeth, no golden standard exists. In the evaluation of the width-to-width and width-to-length proportions of maxillary incisors no golden proportions and standards were detected, respectively.

10-year follow-up of calcifying odontogenic cyst in the periapical region of vital maxillary central incisor.

PubMed

de Carvalhosa, Artur Aburad; de Araújo Estrela, Cyntia Rodrigues; Borges, Alvaro Henrique; Guedes, Orlando Aguirre; Estrela, Carlos

2014-10-01

Radiographic images may lead to misinterpretations of lesions of endodontic and nonendodontic origin. This report describes a case of a 10-year follow-up of a calcifying odontogenic cyst (COC) in the periapical region of a vital maxillary central incisor in a 9-year-old boy. The patient revealed a history of a swelling in the periapical area of tooth #9. The patient denied any dental trauma or history of pain. Clinical examination revealed no mobility, but there was discrete discomfort when horizontal pressure was applied. Pulp vitality was present in all maxillary anterior teeth. Radiographs revealed an oval radiolucent lesion in the periapical region of maxillary central incisor. The therapeutic option was enucleation of the periapical lesion and histologic examination of the specimen. Microscopic findings suggested the diagnosis of a COC. At a follow-up visit 10 years after surgery, panoramic and periapical radiographs showed new bone formation; the patient did not have any pain, and pulp vitality was maintained in all teeth in this area. A COC should be part of the differential diagnosis of other jaw lesions, such as apical periodontitis. The definitive diagnosis of a COC can only be made after microscopic evaluation of the specimen. The follow-up is a helpful reference because it confirms the survival of pulp tissue and no recurrence of the COC. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Characteristics of the Papua New Guinean dentition. I Shovel-shaped incisors and canines associated with lingual tubercles.

PubMed

Doran, G A

1977-10-01

The prevalence of shovel-shaped and lingual tubercles in maxillary incisors and canines in four groups of people in Papua New Guinea is reported. The shovel shape was not common among the people of Highland New Guinea but its presence in Papuans was comparable with that in Mongoloid races.

Analysis of the golden proportion and width/height ratios of maxillary anterior dentition in patients with lateral incisor agenesis.

PubMed

Pini, Núbia Pavesi; de-Marchi, Luciana Manzotti; Gribel, Bruno Frazão; Ubaldini, Adriana Lemos Mori; Pascotto, Renata Corrêa

2012-12-01

  The purpose of this study was to assess the presence of the golden proportion (GP) in the facial view tooth-to-tooth width proportion of the six maxillary anterior teeth and to evaluate the width/height (W/H) ratios of the incisors of patients with maxillary lateral incisor (LI) agenesis treated either with implants or orthodontically (by moving canines into the position of the laterals, recontouring them, and placing composite restorations over the repositioned teeth).   Forty-eight patients with LI agenesis were divided into four experimental groups: unilateral recontouring group (N = 10), bilateral recontouring group (BRG, N = 18), unilateral implant group (UIG, N = 10), bilateral implant group (N = 10), and a control group (CG, N = 25) of patients without agenesis. GP ratios were determined on patients' dental casts placed over Levin's grids, whereas W/H ratios were measured directly on the casts and a millimeter ruler to determine these distances. Statistical analysis was performed with Shapiro-Wilk, Kruskal-Wallis, Mann-Whitney, Friedman, and Wilcoxon tests (p < 0.05).   The incidence of GP in the tooth-to-tooth width proportions was significantly different between groups and more commonly found between centrals and laterals than between laterals and canines. The GP was more likely to be observed in the BRG, UIG, and CG. The results demonstrated that the GP was not found to be present in the majority of the cases treated with maxillary agenesis, regardless of the method of treatment. The mean W/H ratios of the laterals ranged between 0.75 and 0.90.   Although the GP may be a useful diagnostic guide, it was not observed in the majority of esthetic outcomes of patients treated with maxillary LI agenesis in this study. The assessment of the golden proportion and width/height ratio of upper anterior teeth in patients with upper lateral incisor agenesis treated with either implants or tooth re-contouring may assist dentists and patients in deciding the best treatment option based on the peculiarities of each case. © 2012 Wiley Periodicals, Inc.

Impacted maxillary canines and root resorption of adjacent teeth: A retrospective observational study.

PubMed

Guarnieri, R; Cavallini, C; Vernucci, R; Vichi, M; Leonardi, R; Barbato, E

2016-11-01

The prevalence of impacted maxillary canine is reported to be between 1% and 3%. The lack of monitoring and the delay in the treatment of the impacted canine can cause different complications such as: displacement of adjacent teeth, loss of vitality of neighbouring teeth, shortening of the dental arch, follicular cysts, canine ankylosis, recurrent infections, recurrent pain, internal resorption of the canine and the adjacent teeth, external resorption of the canine and the adjacent teeth, combination of these factors. An appropriate diagnosis, accurate predictive analysis and early intervention are likely to prevent such undesirable effects. The objective is to evaluate, by means of a retrospective observational study, the possibility of carrying out a predictive analysis of root resorption adjacent to the impacted canines by means of orthopantomographs, so as to limit the prescription of additional 3D radiography. 120 subjects with unilateral or bilateral maxillary impacted canine were examined and 50 patients with 69 impacted maxillary canine (22 male, 28 female; mean age: 11.7 years) satisfied the inclusion criteria of the study. These patients were subjected to a basic clinical and radiographic investigation (orthopantomographs and computerized tomography). All panoramic films were viewed under standardized conditions for the evaluation of two main variables: maxillary canine angulations (a, b, g angles) and the overlapping between the impacted teeth and the lateral incisor (Analysis of Lindauer). Binary logistic regression was used to estimate the likelihood of resorbed lateral incisors depending on sector location and angle measurements. Results indicated that b angle has the greatest influence on the prediction of root resorption (predictive value of b angle = 76%). If β angle <18° and Lindauer = I, the probability of resorption is 0.06. Evaluation of b angle and superimposition lateral incisor/impacted canine analysed on orthopantomographs could be one of the evaluation criteria for prescribing second level examination (CT and CTCB) and for detecting root resorption of impacted maxillary canine adjacent teeth.

Endodontic, surgical and periodontal treatment of dens invaginatus. Case report.

PubMed

Castellarin, M; Demitri, V; Politi, M

2001-01-01

The aim of this paper is to propose a single stage global treatment of endodontic, periapical and periodontal lesions in a lateral maxillary incisor with dens invaginatus. A 24 year-old woman presenting a lateral maxillary incisor with dens invaginatus in association with periapica1 and periodontal lesions underwent simultaneous surgical, endodontic and periodontal regenerative procedures. At 2, 6, 12, 18 months follow-up the radiographic healing appeared to be improved and the periapical lesion healed completely 1 year after surgical intervention. Surgery in association with endodontic and periodontal procedures represents the treatment of choice to maximize long term prognosis in cases of dens invaginatus with chronic periapical and periodontal lesions.

The Relationship between Dental Follicle Width and Maxillary Impacted Canines' Descriptive and Resorptive Features Using Cone-Beam Computed Tomography.

PubMed

Dağsuyu, İlhan Metin; Okşayan, Rıdvan; Kahraman, Fatih; Aydın, Mehmet; Bayrakdar, İbrahim Şevki; Uğurlu, Mehmet

2017-01-01

To assess the relationship between dental follicle width and maxillary impacted canines' descriptive and resorptive features with three-dimensional (3D) cone-beam computed tomography (CBCT). The study comprised 102 patients with cone-beam computed tomography 3D images and a total of 140 impacted canines. The association between maxillary impacted canine dental follicle width and the variables of gender, impaction side (right and left), localization of impacted canine (buccal, central, and palatal), and resorption of the adjacent laterals was compared. Measurements were analyzed with Student's t -test, Kruskal-Wallis test, and Mann-Whitney U statistical test. According to gender, no statistically significant differences were found in the follicle size of the maxillary impacted canine between males and females ( p > 0.05). Widths of the follicles were determined for the right and left impaction sides, and no statistically significant relation was found ( p > 0.05). There were statistically significant differences between root resorption degrees of lateral incisors and maxillary impacted canine follicle width ( p < 0.05). Statistically significant higher follicle width values were present in degree 2 (mild) resorption than in degree 1 (no) and degree 3 (moderate) resorption samples ( p < 0.05). No significant correlation was found between follicle width and the variables of gender, impaction side, and localization of maxillary impacted canines. Our study could not confirm that increased dental follicle width of the maxillary impacted canines exhibited more resorption risk for the adjacent lateral incisors.

A multicenter interracial study of facial appearance. Part 2: A comparison of intraoral parameters.

PubMed

Owens, Edward G; Goodacre, Charles J; Loh, Poey Ling; Hanke, Gilberto; Okamura, Mitsunobu; Jo, Kwang-hun; Muñoz, Carlos A; Naylor, W Patrick

2002-01-01

This article compares interracial or gender differences of six intraoral dental parameters among six racial groups (African American, Caucasian, Chinese, Hispanic, Japanese, and Korean). The same 253 patients participating in part 1 were included in this portion of the study to evaluate six intraoral parameters. The data were collected and analyzed using a one-way analysis of variance, followed by the Tukey-Kramer test for honestly significant difference when statistically significant differences were found (P < .05). Women displayed significantly more gingival tissue in four of the six races, and African Americans displayed significantly more gingival tissue than any other race. Women had significantly more missing teeth than men in three of the six races studied. Japanese subjects had significantly fewer missing teeth and smaller maxillary central incisors than all other groups except Caucasians. Women had significantly narrower maxillary central incisors in three of the races. There was a significantly higher prevalence of Angle Class III relationships in Chinese subjects. The Japanese had significantly more Class II molar relationships than other races. Racial and gender differences were found in gingival tissue display, the number of missing teeth, maxillary right central incisor crown width, and Angle molar classification, but not in the amount of vertical or horizontal overlap of the anterior teeth.

Facial and occlusal esthetic improvements of an adult skeletal Class III malocclusion using surgical, orthodontic, and implant treatment

PubMed Central

de Almeida Cardoso, Mauricio; de Avila, Erica Dorigatti; Guedes, Fabio Pinto; Battilani Filho, Valter Antonio Ban; Capelozza Filho, Leopoldino; Correa, Marcio Aurelio; Nary Filho, Hugo

2016-01-01

The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects. PMID:26877982

Aesthetic evaluation of profile incisor inclination.

PubMed

Ghaleb, Nathalie; Bouserhal, Joseph; Bassil-Nassif, Nayla

2011-06-01

The objectives of this study were to evaluate (1) the impact of maxillary incisor inclination on the aesthetics of the profile view of a smile, (2) to determine the most aesthetic inclination in the profile view of a smile and correlate it with facial features, and (3) to determine if dentists, orthodontists, and laypeople appreciate differently incisor inclination in smile aesthetics. A smiling profile photograph of a female subject (22 years of age) who fulfilled the criteria of soft tissue normative values and a balanced smile was obtained. The photograph was manipulated to simulate six lingual and labial inclinations at 5 degree increments to a maximum of 15 degrees. The seven photographs were randomly distributed in a binder to three groups of raters (30 dentists, 30 orthodontists, and 30 laypeople) who scored the attractiveness of the photographic variations using a visual analogue scale. Comparison of the mean scores was carried out by repeated analysis of variance, univariate tests, and multiple Bonferroni comparisons. The results showed a statistically significant interaction between the rater's profession and the aesthetic preference of incisor inclination (P = 0.013). The profile smile corresponding to an increase of 5 degrees in a labial direction had the highest score among all professions and among male and female raters. Orthodontists preferred labial crown torque; dentists and laypeople did not appreciate excessive incisor inclination in either the lingual or the labial directions. The most preferred smile matched with a maxillary incisor inclined 93 degrees to the horizontal line and +7 degrees to the lower facial third.

[Comparison of treatment results between implant anchorage and traditional intraoral anchorage in patients with maxillary protrusion].

PubMed

Ma, Ning; Li, Wei-Ran; Chen, Xiao-Hong; Zheng, Xu

2016-08-01

To compare the treatment effects in patients with maxillary protrusion between implant anchorage and traditional intraoral anchorage. Thirty patients with maxillary protrusion treated with bilateral maxillary first premolars extractions and high anchorage were selected. They were randomly divided into implant anchorage group and traditional intraoral anchorage group. Each group had 15 cases. The casts and the cephalograms were obtained before treatment (T1) and after treatment (T2). Three-dimensional model analysis was used to compare the teeth movements between the two groups and cephalometric analysis was used to compare the changes of skeletal and soft tissues. The differences were analyzed with SPSS 17.0 software package. In the implant anchorage group, the upper central incisors were retracted by (6.661±1.328) mm and intruded by (0.129±1.815) mm. In the traditional intraoral anchorage group, the upper central incisors were retracted by (5.788±2.009) mm and extruded by (2.623±1.776) mm. There was no significant difference between the two groups in sagittal movement (P>0.05), but there was significant difference in vertical movement (P<0.05). In the implant anchorage group, the upper first molars were protracted by (0.608±1.045) mm, intruded by (0.608±1.045) mm and moved palatally by (0.477±0.904) mm. In the traditional intraoral anchorage group, the upper first molars were protracted by (1.503±0.945) mm, extruded by (0.072±0.690) mm and moved palatally by (0.883±0.752)mm. There was significant difference between the two groups in sagittal movement and vertical movement (P<0.05), but there was no significant difference in horizontal movement(P>0.05). There was no significant difference between the two groups in the changes of cephalometric measurements of skeletal and soft tissues (P>0.05). Implant anchorage may be superior in vertical control of the maxillary incisors and also superior in sagittal and vertical control of the maxillary molars to traditional intraoral anchorage during management of maxillary protrusion.

A rare case of canine anomaly - a possible algorithm for treating it.

PubMed

Vaida, Ligia; Todor, Bianca Ioana; Corega, Claudia; Băciuţ, Mihaela; Băciuţ, Grigore

2014-01-01

Canine transmigration is a very rare dental anomaly in which an unerupted mandibular canine migrates, crossing the mandibular midline. This unusual condition is most often diagnosed by chance during a routine X-ray examination. The most common clinical signs announcing the presence of this anomaly are over-retention of the deciduous canine and the absence of permanent canine from the dental arch after its physiological period of eruption. In this paper, we present a clinical case, 10-year-old boy, who was diagnosed with mandibular right canine transmigration at three years after the start of orthodontic treatment, during which we were expecting the eruption of mandibular canines. The orthopantomograph revealed the mandibular right canine to be in a horizontal position under the apices of the incisors - type 2 transmigration pattern classified by Mupparapu (2002). Based on cone-beam computer tomography examination, we recommended a surgical exposure of the canine and orthodontic alignment. Due to the risk of root resorption of the mandibular right lateral incisor during orthodontic movement phase of canine transmigrated to the dental arch, we decided to align the mandibular right canine in a transposition, between the two mandibular right incisors. Then we resorted to adapting the mandibular right lateral incisor coronary morphology to simulate a canine and also to reshaping the canine coronary morphology to resemble a lateral incisor. This therapeutic approach allowed us to restore morphologically and functionally the mandibular dento-alveolar arch, preserving the entire dental system.

The restoration of a maxillary central incisor fracture with the original crown fragment using a glass fiber-reinforced post: a clinical report.

PubMed

Durkan, Rukiye Kaplan; Ozel, M Birol; Celik, Davut; Bağiş, Bora

2008-12-01

This report describes an esthetic, conservative, and economical alternative restoration technique for a fractured central incisor using the patient's own tooth crown piece and a bondable reinforcement glass fiber. Although the long-term durability of this adhesive post core restoration remains unknown, it remains successful after 1 year.

A patient with mandibular deviation and 3 mandibular incisors treated with asymmetrically bent improved superelastic nickel-titanium alloy wires.

PubMed

Ikeda, Yuhei; Kokai, Satoshi; Ono, Takashi

2018-01-01

Skeletal and dental discrepancies cause asymmetric malocclusions in orthodontic patients. It is difficult to achieve adequate functional occlusion and guidance in patients with congenital absence of a mandibular incisor due to the tooth-size discrepancy. Here, we describe the orthodontic treatment of a 22-year-old woman with an asymmetric Angle Class II malocclusion, mandibular deviation to the left, and 3 mandibular incisors. The anterior teeth and maxillary canines were crowded. We used an improved superelastic nickel-titanium alloy wire (Tomy International, Tokyo, Japan) to compensate for the asymmetric mandibular arch and an asymmetrically bent archwire to move the maxillary molars distally. A skeletal anchorage system provided traction for intermaxillary elastics, and extractions were not needed. We alleviated the crowding and created an ideal occlusion with proper overjet, overbite, and anterior guidance with Class I canine and molar relationships. This method of treatment with an asymmetrically bent nickel-titanium alloy wire provided proper Class I occlusion and anterior guidance despite the mandibular deviation to the left and 3 mandibular incisors, without the need for extractions. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Prevalence of traumatic dental injuries to permanent incisors among 12-year-old school children in Davangere, South India.

PubMed

Ravishankar, Telgi Lingesh; Kumar, Mohapatra Ashok; Ramesh, Nagrajappa; Chaitra, Telgi Ravishankar

2010-01-01

To assess the prevalence and factors associated with traumatic injuries to permanent incisors of 12-year-old school children in Davangere, India. In total, 1020 12-year-old school children were selected. Two trained and calibrated clinicians examined the children in the school environment using the World Health Organization Classification of Tooth Fracture (1978). Examination was also done for lip coverage and maxillary overjet using the Community Periodontal Index probe. Children were then interviewed using a structured questionnaire for demographic data and history of the injury. The overall prevalence rate of traumatic dental injuries (TDI) to permanent incisor teeth was 15.1%. The prevalence of TDI was higher in boys compared to girls. The major cause of TDI was falling followed by collision. The maxillary incisors were commonly injured, involving mainly enamel fracture. Children with excessive overjet and inadequate lip coverage were more likely to have injuries. TDI could be a serious dental public health problem among children. Thus, there is an urgent need to collect local data on dental injuries in order to obtain a more comprehensive picture of dental health.

Correction of Malpositioned Implants through Periodontal Surgery and Prosthetic Rehabilitation Using Angled Abutment

PubMed Central

de Avila, Érica Dorigatti; de Barros-Filho, Luiz Antônio Borelli; de Andrade, Marcelo Ferrarezi; Mollo, Francisco de Assis; de Barros, Luiz Antônio Borelli

2014-01-01

When dental implants are malpositioned in relation to the adjacent teeth and alveolar bone or in an excessive buccal or lingual position, the final prosthesis rehabilitation impairs the peri-implant health of the gingival tissues and the aesthetics of the patient. Thus, the purpose of this case was to report and discuss a multidisciplinary protocol for the treatment of a compromised maxillary tooth in a patient with an abscess in his right central incisor due to an excessive buccal implant position. The patient presented with an implant-supported provisional restoration on his right maxillary central incisor and a traumatic injury in his left central incisor. The treatment protocol consisted in (i) abutment substitution to compensate the incorrect angulation of the implant, (ii) clinical crown lengthening, (iii) atraumatic extraction of the left central incisor, and (iv) immediate implant placement. Finally, (v) a custom abutment was fabricated to obtain a harmonious gingival contour around the prosthetic crown. In conclusion, when implants are incorrectly positioned in relation to the adjacent teeth, associated with soft-tissue defects, the challenge to create a harmonious mucogingival contours may be achieved with an interdisciplinary approach and with the placement of an appropriate custom abutment. PMID:24955259

Root morphology and development of labial inversely impacted maxillary central incisors in the mixed dentition: a retrospective cone-beam computed tomography study.

PubMed

Sun, Hao; Wang, Yi; Sun, Chaofan; Ye, Qingsong; Dai, Weiwei; Wang, Xiuying; Xu, Qingchao; Pan, Sisi; Hu, Rongdang

2014-12-01

The aim of this study was to analyze 3-dimensional data of root morphology and development in labial inversely impacted maxillary central incisors. Cone-beam computed tomography images from 41 patients with impacted incisors were divided into early and late dental age groups according to their dental age. Sagittal slices in which the labiolingual width of the tooth was the widest in the axial view were evaluated. The inverse angle, the dilaceration angle, and the length of both impacted and homonym teeth were evaluated with SimPlant Pro software (version 13.0; Materialise Dental NV, Leuven, Belgium). The Student t test indicated that the lengths of the impacted teeth were significantly shorter than those of the homonym teeth (P <0.05), and the root lengths of the early dental age group were significantly shorter than those of the late dental age group. The results from chi-square tests indicated that the incidence of dilacerations was significantly higher in the late dental age group when compared with the early dental age group. Multiple regression analyses indicated that the independent variables for root length of the impacted teeth were dental age (β = 0.958; P <0.001) and length of the nondilacerated part of the root (β = 0.435; P <0.001). Dilaceration was more common in the late dental age group. The roots of labial inversely impacted maxillary central incisors continue developing, but their potential is limited. Copyright © 2014 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

The Evaluation of Root Fracture with Cone Beam Computed Tomography (CBCT): An Epidemiological Study.

PubMed

Doğan, Mehmet-Sinan; Callea, Michele; Kusdhany, Lindawati S; Aras, Ahmet; Maharani, Diah-Ayu; Mandasari, Masita; Adiatman, Melissa; Yavuz, Izzet

2018-01-01

The aim of this study was evaluation of the cone-beam computed tomography (CBCT) image of 50 patients at the ages of 8-15 suspecting root fracture and root fracture occurred, exposed to dental traumatic. In additionally, this study was showed effect of crown fracture on root fracture healing. All of the individuals included in the study were obtained images with the cone-beam computed tomography range of 0,3 voxel and 8.9 seconds.(i-CAT®, Model 17-19, Imaging SciencesInternational, Hatfield, Pa USA).The information obtained from the history and CBCT images of patients were evaluated using chi-square test statistical method the mean and the distribution of the independent variables. 50 children, have been exposed to trauma, was detected root fracture injury in 97 teeth. Horizontal root fracture 63.9% of the 97 tooth, the oblique in 31.9%, both the horizontal and oblique in 1.03%, partial fracture in 2.06% ,and both horizontally and vertical in 1.03% was observed.The most affected teeth, respectively of, are the maxillary central incisor (41.23% left, right, 37.11%), maxillary left lateral incisor (9.27%), maxillary right lateral incisor (11.34%), and mandibular central incisor (1.03%). Crown fractures have negative effects on spontaneous healing of root fractures. CBCT are used selected as an alternative to with conventional radiography for diagnosis of root fractures. In particular, ıt's cross-sectional image is quite useful and has been provided more conveniences seeing the results of diagnosis and treatment for clinician. Key words: Root fracture, CBCT, Epidemiolog.

Orthodontic-periodontic intervention of pathological migration of maxillary anterior teeth in advanced periodontal disease.

PubMed

Panchal, Anita H; Patel, Vasumati G; Bhavsar, Neeta V; Mehta, Hardik V

2013-05-01

This case report presents a female patient whose chief complaint was of mobile and palatally drifted upper left central incisor which led to malalignment of upper anterior teeth. Orthodontic treatment of upper left central incisor was done with the help of 'Z' spring for the alignment of the upper anterior teeth. It was followed by splinting of upper anterior teeth to improve the stability and masticatory comfort. Regenerative periodontal surgery with Decalcified freeze dried bone allograft was done in relation to upper left central incisor.

12 years' preservation of maxillary permanent incisors with cervical root fractures adjacent to aggressive periodontitis: Report of a case.

PubMed

Tobiska, Sandra; Krastl, Gabriel

2018-05-17

This case report presents long-term results following horizontal root fracture of both maxillary central incisors in a 19-year-old woman with aggressive periodontitis. Due to extensive marginal bone loss and the close proximity of the fracture lines to the bottoms of the periodontal pockets, the prognosis of both teeth was uncertain at the time of the accident. Nevertheless, a conservative treatment strategy consisting of splinting and nonsurgical periodontal therapy was initiated. Follow-up at 12 years after the start of treatment revealed a stable situation from clinical and radiologic perspectives. Permanent fixation to the adjacent teeth and regular supportive periodontal care were the basis for a favorable long-term prognosis.

Development anomaly and non-vitality: Two case reports

PubMed Central

Kailasam, Sivakumar; Thangavel, Boopathi; Mathew, Sebeena; Das, Arjun Kesavan Purushotaman; Jayakodi, Harikaran; Kumaravadivel, Karthick

2012-01-01

Anatomic aberrations are seen in human dentition. The maxillary incisor region of the permanent dentition where these anatomical aberrations are commonly seen is considered an area of embryonic hazard. Aberrations affecting the internal and external morphology can at times be the cause of complex pathological conditions involving the pulpal and periodontal tissues and can pose a challenge to the clinician for the diagnosis and clinical management. Detecting and treating the anomalies at an early phase is essential as it poses a threat for the loss of vitality of the concerned teeth. The aim of this paper is to highlight the fact two different developmental anomalies of maxillary incisors, namely palatoradicular groove and Turner's hypoplasia, led to the loss of vitality of the same. PMID:23066269

Autotransplantation and Orthodontic Treatment after Maxillary Central Incisor Region Trauma: A 13-Year Follow-Up Case Report Study.

PubMed

Piroozmand, Farzad; Hessari, Hossein; Shirazi, Mohsen; Khazaei, Pegah

2018-01-01

The anterior maxilla is the most prone region to the trauma during childhood, and tooth loss sometimes happens due to trauma. Replacing the missing teeth has always been one of the dentists' challenges in children and adolescents, since their dentofacial growth is not complete. Autotransplantation of mandibular premolars with two-thirds or three-quarters of root formation provides the best prognosis for the tooth survival. This case report describes the management of a 10-year-old boy suffering a severe dental injury who received the autotransplantation of the premolars from mandible to restore the space caused by trauma in maxillary central incisor region and a 13-year follow-up of the autotransplantation.

Combined periodontic-orthodonticendodontic interdisciplinary approach in the treatment of periodontally compromised tooth.

PubMed

Deepa, D; Mehta, D S; Puri, Viren K; Shetty, Sadashiva

2010-04-01

Orthodontic treatment in adult patients is one of the most frequently encountered components involving multidisciplinary approaches. In the present report, a 28-year-old male patient was treated for localized chronic periodontitis with pocket formation, mobility, pathologic migration and malalignment of maxillary left lateral incisor tooth #22. The periodontal therapy included motivation, education and oral-hygiene instructions (O.H.I.), scaling and root planing and periodontal flap surgery. Subsequently on resolution of periodontal inflammation, orthodontic therapy was carried out using the orthodontic aligner for a period of 6 months. Post-treatment (3 years) results showed complete resolution of infrabony pocket with significant bone fill, reduced tooth mobility and complete alignment of the affected maxillary left lateral incisor, thus restoring the esthetics and function.

Transparent aligners: An invisible approach to correct mild skeletal class III malocclusion

PubMed Central

Yezdani, A. Arif

2015-01-01

This case report highlights the treatment of a mild skeletal class III malocclusion with an invisible thermoplastic retainer. A 15-year-old female patient presented with a mild skeletal class III malocclusion with a retrognathic maxilla, orthognathic mandible, a low mandibular plane angle with Angle's class III malocclusion with maxillary lateral incisors in anterior cross-bite with crowding of maxillary anteriors, imbricated and rotated mandibular incisors and deep bite. Accurate upper and lower impressions and a bite registration were taken with polyvinyl siloxane rubber base impression material. This was then sent to the lab for the processing of a series of ClearPath aligners. The ClearPath virtual set-up sent from the lab provided the treatment plan and interproximal reduction estimation complete with posttreatment results. This enabled the clinician to actively participate in the treatment plan and provide the necessary suggestions. The ClearPath three-dimensional aligner was found to have effectively corrected the anterior cross-bite and crowding of the maxillary anteriors. PMID:26015738

Effect of water storage on tooth displacement in maxillary complete dentures.

PubMed

Consani, Rafael Leonardo Xediek; Mesquita, Marcelo Ferraz; Consani, Simonides; Correr Sobrinho, Lourenço; Sousa-Neto, Manoel Damião

2006-01-01

The purpose of this study was to investigate the effect of water storage at 37 degrees C (1 week, 1 month and 3 months) on tooth displacement in maxillary complete dentures. Ten maxillary dentures were constructed with Clássico acrylic resin using the conventional method of packing in metallic flasks. Metallic reference pins were placed in the incisal border of the central incisors (I), labial cusp of the first premolars (PM), and mesiolabial cusp of the second molars (M). Twelve hours after final flask closure, the acrylic resin was cured in water at 74 degrees C for 9 h. The flasks were removed from the thermo-polymerizing unit after water-cooling and the dentures were deflasked, finished and stored in water at a temperature of 37 degrees C for 1 week, 1 month and 3 months. At deflasking and at the water storage intervals, the I-I (incisor to incisor), PM-PM (pre-molar to pre-molar), and M-M (molar to molar) transversal distances, and LI-LM (left incisor to left molar) and RI-RM (right incisor to right molar) anteroposterior distances were measured using an optical microscope with 0.0005 mm accuracy. Data were submitted to ANOVA and Tukey's test (5%). Comparing the evaluation periods for each individual transversal and anteroposterior reference point, no statistically significant differences were observed among deflasking and the water storage intervals for I-I, PM-PM, M-M and RI-RM distances (p>0.05). For LI-LM, however, deflasking values were statistically different from those of 1-week, 1-month and 3-month water storage intervals (p<0.05), which, in turn, did not differ statistically to each other (p>0.05). These results confirm the complexity of tooth displacement in complete dentures. From a clinical standpoint, the difference observed in LI-LM distance after water storage would not be detected by the patients during clinical use.

Orthodontic and orthopedic treatment for a growing patient with Tessier number 0 cleft

PubMed Central

Park, Yoon-Hee; Chung, Jee Hyeok; Kim, Sukwha; Choi, Jin-Young

2018-01-01

The purpose of this case report was to introduce the concept of orthodontic and orthopedic treatment for a growing patient with Tessier number 0 cleft. A 5-year-old boy patient with Tessier number 0 cleft presented congenitally missing maxillary central incisors (MXCI), a bony defect at the premaxilla, a constricted maxillary arch, an anterior openbite, and maxillary hypoplasia. His treatment was divided into three stages: management of the bony defect at the premaxilla and the congenitally missing MXCIs using a fan-type expansion plate, iliac bone grafting, and eruption guidance of the maxillary lateral incisors into the graft area for substitution of MXCIs; management of the maxillary hypoplasia using sequential facemask therapy with conventional and skeletal anchorage; and management of the remaining occlusal problems using fixed orthodontic treatment. The total treatment duration was 15 years and 10 months. Class I canine and Class II molar relationships and normal overbite and overjet were achieved at the end of treatment. Although the long-term use of facemask therapy resulted in significant protraction of the retrusive maxilla, the patient exhibited Class III profile because of continued mandibular growth. However, the treatment result was well maintained after 2 years of retention. The findings from this case suggest that interdisciplinary and customized approaches are mandatory for successful management of maxillary hypoplasia, bony defect, and dental problems in Tessier number 0 cleft. Moreover, considering the potential of orthognathic surgery or distraction osteogenesis, meticulous monitoring of mandibular growth until growth completion is important. PMID:29564221

First records of talon cusps on baboon maxillary incisors argue for standardizing terminology and prompt a hypothesis of their formation.

PubMed

Heaton, Jason L; Pickering, Travis Rayne

2013-12-01

Dental characters can provide vital clues for understanding intra- and intertaxonomic morphological variation and its underlying genetic and environmental components. However, the unambiguous identification of particular traits and their comparative study is often confounded by lack of consistent terminology in the relevant literature. This difficulty is exacerbated when the etiologies are not completely understood, as is the case with talon cusps. To date, research on talon cusps has focused on modern humans. In many instances, descriptions of talon cusps appear in clinical case studies focusing on their treatment and removal. What is lacking in those discussions, though, is a comparative framework, in which the occurrence of talon cusps in nonhuman primates, and possibly other mammals, is established and understood. Here, we report on a taloned upper central incisor of a wild baboon (Papio hamadryas ursinus) from South Africa. The anomalous incisor of this individual includes an exaggerated accessory cusp diagnosed as a Type II talon. Microcomputed tomographic and radiographic analyses show that the taloned cusp possesses enamel, dentin, and pulp. In addition, we identified an unclassifiable talon cusp on a central maxillary incisor of a baboon skull housed in the Smithsonian Institution's Natural History Museum collection. Our observations of talon cusps on baboon incisors demonstrate that, with regard to this phenomenon, systematic study of nonhuman primates is much needed, along with a consistent use of terminology in the anatomical and anthropological literature. Finally, we present a hypothesis of the formation of talon cusps on mammalian incisors. Copyright © 2013 Wiley Periodicals, Inc.

Changes in force associated with the amount of aligner activation and lingual bodily movement of the maxillary central incisor

PubMed Central

Li, Xiaowei; Ren, Chaochao; Wang, Zheyao; Zhao, Pai; Wang, Hongmei

2016-01-01

Objective The purposes of this study were to measure the orthodontic forces generated by thermoplastic aligners and investigate the possible influences of different activations for lingual bodily movements on orthodontic forces, and their attenuation. Methods Thermoplastic material of 1.0-mm in thickness was used to manufacture aligners for 0.2, 0.3, 0.4, 0.5, and 0.6 mm activations for lingual bodily movements of the maxillary central incisor. The orthodontic force in the lingual direction delivered by the thermoplastic aligners was measured using a micro-stress sensor system for the invisible orthodontic technique, and was monitored for 2 weeks. Results Orthodontic force increased with the amount of activation of the aligner in the initial measurements. The attenuation speed in the 0.6 mm group was faster than that of the other groups (p < 0.05). All aligners demonstrated rapid relaxation in the first 8 hours, which then decreased slowly and plateaued on day 4 or 5. Conclusions The amount of activation had a substantial influence on the orthodontic force imparted by the aligners. The results suggest that the activation of lingual bodily movement of the maxillary central incisor should not exceed 0.5 mm. The initial 4 or 5 days is important with respect to orthodontic treatment incorporating an aligner. PMID:27019820

Early headgear effects on the eruption pattern of the maxillary canines.

PubMed

Silvola, Anna-Sofia; Arvonen, Päivi; Julku, Johanna; Lähdesmäki, Raija; Kantomaa, Tuomo; Pirttiniemi, Pertti

2009-05-01

To test the null hypothesis that early headgear (HG) treatment has no effect on the eruption pattern of the maxillary canines in the early mixed dentition. Sixty-eight children (40 boys and 28 girls) with a Class II tendency in occlusion and moderate crowding of the dental arches were randomized into two groups. HG treatment was initiated immediately in the first group. In the second group only minor interceptive procedures were performed during the first follow-up period of 2 years. Orthopantomograms were taken at the baseline, three times at 1-year intervals, and after growth at the age of 16. Eruption geometry was performed. The space from the maxillary first molar to the lateral incisor was measured on the dental casts. The inclination of the maxillary canine in relation to the midline appeared to be significantly more vertically oriented on the right side in the HG group 1 and 2 years after starting the HG therapy (P = .0098 and P = .0003, respectively). The inclination in relation to the lateral incisors was smaller in the HG group bilaterally after 1 year and 2 years of HG treatment, and on the right side after 3 years of treatment. The hypothesis is rejected. Early HG treatment significantly affects the inclination of the maxillary canine during eruption. The strongest influence was seen after 2 years of HG use, more prominently in the right-side canine.

A comparative study of the effect of the intrusion arch and straight wire mechanics on incisor root resorption: A randomized, controlled trial.

PubMed

de Almeida, Marcio Rodrigues; Marçal, Aline Siqueira Butzke; Fernandes, Thais Maria Freire; Vasconcelos, Juliana Brito; de Almeida, Renato Rodrigues; Nanda, Ravindra

2018-01-01

To analyze and compare external apical root resorption (EARR) of maxillary incisors treated by intrusion arch or continuous archwire mechanics. This cone-beam computed tomography (CBCT) study analyzed 28 deep bite patients in the permanent dentition who were randomly divided into two groups: Group 1, 12 patients with initial mean age of 15.1 ± 1.6 years and mean overbite of 4.6 ± 1.2 mm treated with the Connecticut intrusion arch (CIA) in the upper arch (Ortho Organizers, Carlsbad, Calif) for a mean period of 5.8 ± 1.27 months. Group 2, 16 patients with initial mean age of 22.1 ± 5.7 years and mean overbite of 4.1 ± 1.1 mm treated with conventional leveling and alignment using continuous archwire mechanics for 6.1 ± 0.81 months. The degree of EARR was detected in 112 maxillary incisors by using CBCT scans and a three-dimensional program (Dolphin 11.7, Dolphin Imaging & Management Solutions, Chatsworth, Calif). The CBCT scans were obtained before (T1) and 6 months after initiation of treatment (T2). Differences between and within groups were assessed by nonpaired and paired t-tests, respectively, with a 5% significance level. Significant differences were found for both groups between T1 and T2 ( P < .05) indicating that EARR occurred in both groups. However, there were no significant differences when EARR was compared between group 1 (-0.76 mm) and group 2 (-0.59 mm). The Connecticut intrusion arch did not lead to greater EARR of maxillary incisors when compared with conventional orthodontic mechanics.

Canines are affected in 16-year-olds with molar-incisor hypomineralisation (MIH): an epidemiological study based on the Tromsø study: "Fit Futures".

PubMed

Schmalfuss, A; Stenhagen, K R; Tveit, A B; Crossner, C-G; Espelid, I

2016-04-01

This was to determine the prevalence, distribution of affected teeth and severity of MIH in adolescents from Northern Norway. It was part of a cross-sectional health survey Fit Futures including 16-year-olds from two neighbouring municipalities, Tromsø and Balsfjord. The prevalence of MIH was 13.9% (110 of 794). The maxillary first permanent molars (FPMs) were 1.6 times more frequently affected than in the mandible (P < 0.001). The FPMs on the right side were 1.2 times more often affected than the FPMs on the left side (P = 0.038). The maxillary incisors were 2.5 times more often affected than the incisors in the mandible (P < 0.001). The proportions of participants whose canines and incisors were involved were 22.8 and 41.8%, respectively. Altogether 201 FPMs were affected; 54.0% of these had opacities only, 24.3% had posteruptive breakdown (PEB), 18.8% had atypical restorations, and 3.0% had been extracted due to MIH. The buccal surfaces were most often affected in FPMs. More severe lesions were found in the mandibular FPMs compared with the maxillary FPMs (P = 0.002). In the lower canines, only opacities were recorded, while in the upper jaw 13.0% of the affected canines showed PEBs. The distribution of MIH in the dentition was not symmetrical. The prevalence of MIH (13.9%) in the study population of 16-year-olds from Northern Norway is consistent with previous Scandinavian reports. The distribution pattern shows that one participant in four with MIH had at least one affected canine. Further studies are needed to describe the localisation of defects on the enamel surface and to relate these findings to enamel thickness and the duration of amelogenesis.

Rapid Palatal Expansion in the absence of posterior cross-bite to intercept maxillary incisor crowding in the mixed dentition: a CBCT evaluation of spontaneous changes of untouched permanent molars.

PubMed

Rosa, M; Lucchi, P; Manti, G; Caprioglio, A

2016-12-01

The aim of this study was to investigate the reaction of untouched permanent molars following RPE, anchored on deciduous teeth in the early mixed dentition, aimed to solve maxillary anterior crowding in the absence of posterior cross-bite. A prospective clinical trial comprised 35 consecutive patients (20 males and 15 females) treated by the same orthodontist (MR). All patients showed crowding of the upper permanent incisors in the early mixed dentition in the absence of posterior cross-bite. RPE was anchored on second deciduous molars and on the deciduous canines. CBCT was taken before and after the removal of the RPE appliance. The transverse linear changes in width and the variation in the torque of the permanent molars were measured in the coronal plane. Relief of incisor crowding was found in all patients. The transverse width between permanent molars increased significantly. The apices of the upper permanent molars spontaneously expanded more than the crowns, while the opposite happened on the lower permanent molars. Moreover, the untouched upper permanent molars spontaneously uprighted palatally, while the lower permanent molars spontaneously uprighted buccally. The variation in the torque of the permanent molars mirrored transverse normal growth. In the early mixed dentition and in the absence of posterior cross-bite, it is possible to expand transversally the palate while uprighting the upper permanent molars in the opposite direction. RPE anchored on the deciduous teeth in the early mixed dentition, in the absence of posterior cross-bite, provides an "anticipation of transverse growth" and could be indicated to expand the anterior portion of the maxillary arch perimeter to solve upper incisor crowding.

The Evaluation of Root Fracture with Cone Beam Computed Tomography (CBCT): An Epidemiological Study

PubMed Central

Doğan, Mehmet-Sinan; Callea, Michele; Kusdhany, Lindawati S.; Aras, Ahmet; Maharani, Diah-Ayu; Mandasari, Masita; Adiatman, Melissa

2018-01-01

Background The aim of this study was evaluation of the cone-beam computed tomography (CBCT) image of 50 patients at the ages of 8-15 suspecting root fracture and root fracture occurred, exposed to dental traumatic. In additionally, this study was showed effect of crown fracture on root fracture healing. Material and Methods All of the individuals included in the study were obtained images with the cone-beam computed tomography range of 0,3 voxel and 8.9 seconds.(i-CAT®, Model 17-19, Imaging SciencesInternational, Hatfield, Pa USA).The information obtained from the history and CBCT images of patients were evaluated using chi-square test statistical method the mean and the distribution of the independent variables. Results 50 children, have been exposed to trauma, was detected root fracture injury in 97 teeth. Horizontal root fracture 63.9% of the 97 tooth, the oblique in 31.9%, both the horizontal and oblique in 1.03%, partial fracture in 2.06% ,and both horizontally and vertical in 1.03% was observed.The most affected teeth, respectively of, are the maxillary central incisor (41.23% left, right, 37.11%), maxillary left lateral incisor (9.27%), maxillary right lateral incisor (11.34%), and mandibular central incisor (1.03%). Conclusions Crown fractures have negative effects on spontaneous healing of root fractures. CBCT are used selected as an alternative to with conventional radiography for diagnosis of root fractures. In particular, ıt’s cross-sectional image is quite useful and has been provided more conveniences seeing the results of diagnosis and treatment for clinician. Key words:Root fracture, CBCT, Epidemiolog. PMID:29670714

Combined periodontic-orthodonticendodontic interdisciplinary approach in the treatment of periodontally compromised tooth

PubMed Central

Deepa, D; Mehta, D. S.; Puri, Viren K.; Shetty, Sadashiva

2010-01-01

Orthodontic treatment in adult patients is one of the most frequently encountered components involving multidisciplinary approaches. In the present report, a 28-year-old male patient was treated for localized chronic periodontitis with pocket formation, mobility, pathologic migration and malalignment of maxillary left lateral incisor tooth #22. The periodontal therapy included motivation, education and oral-hygiene instructions (O.H.I.), scaling and root planing and periodontal flap surgery. Subsequently on resolution of periodontal inflammation, orthodontic therapy was carried out using the orthodontic aligner for a period of 6 months. Post-treatment (3 years) results showed complete resolution of infrabony pocket with significant bone fill, reduced tooth mobility and complete alignment of the affected maxillary left lateral incisor, thus restoring the esthetics and function. PMID:21691554

Apical root resorption comparison between Fränkel and eruption guidance appliances.

PubMed

Janson, Guilherme; Nakamura, Alexandre; de Freitas, Marcos Roberto; Henriques, José Fernando Castanha; Pinzan, Arnaldo

2007-06-01

The objectives of this study were to compare the amounts of apical root resorption that occur after treatment with 2 removable appliances-the Fränkel function regulator and the eruption guidance appliance (EGA)-in an untreated control group, and to determine the prevalence of root resorption in the maxillary and mandibular incisors and the dental arches. After treatment, periapical radiographs were obtained of the maxillary and mandibular incisors with the long-cone paralleling technique from 72 patients divided into 3 groups. Group 1 included 24 patients treated with the Fränkel appliance, group 2 consisted of 24 patients treated with the EGA, and group 3 comprised 24 untreated subjects. Some patients in groups 1 and 2 were also treated with fixed appliances. Subgroups of patients who had used exclusively 1 functional appliance were also formed and evaluated. Root resorption was scored according to the method of Levander and Malmgren. Results of the Kruskal-Wallis tests showed significantly greater resorption in the Fränkel group, the EGA group, and the EGA subgroup in relation to the control group. However, there were no statistically significant differences between the Fränkel and the EGA groups and the subgroups. The amounts of resorption were predominantly small and similar in the experimental groups and the subgroups. The prevalence of resorption for the incisors was greatest for the maxillary central, followed by the maxillary lateral, mandibular central, and mandibular lateral. It was concluded that the Fränkel group, the EGA group, and the EGA subgroup had significantly greater resorption than the control group. There was no difference in the amount of resorption between the Fränkel and the EGA groups.

[Alveolar bone thickness in A point area : how to avoid periodontal failures in front of upper incisors].

PubMed

Chevalier, Émilie; Philip-Alliez, Camille; Le Gall, Michel

2016-03-01

Studies on orthodontic-periodontics relationships are numerous but few have benefited from the contribution of new 3D imaging techniques that emphasize iatrogenic effects that orthodontics may have on the periodontium. Periodontal risk in terms of fenestration, bone dehiscences next maxillary incisors are real during or after orthodontic treatment. The accurate assessment of the initial situation in terms of bone quantity in this dental arch anterior segment is thus very important. Our study aimed to evaluate the reliability of conventional lateral cephalograms to quantify alveolar bone thickness in relation to the maxillary incisors by comparing it with data from CT scans. The second objective was to identify an at risk patient profile by assessing possible correlations between this thickness and dysmorphia components. The results revealed a half of assessment error in the estimation of bone thickness and increased risk in case of hyperdivergence typology, Class III skeletal relationships and dento-alveolar protrusion. Finally, in view of these data, we discussed the clinical procedures to avoid such periodontal failures in this anterior segment of the dental arch. © EDP Sciences, SFODF, 2016.

Surgical-orthodontic treatment of Class I malocclusion with maxillary vertical excess--a case report.

PubMed

Kiran, Jyothi; Isaac, Anish; Shanthraj, Ravis; Madannagowda, Shivalinga

2012-01-01

This article describes the treatment of an adult male with vertical maxillary excess, excessive gingival display on smiling, a convex profile, proclined upper and lower incisors, and crowded lower anteriors with severe lip incompetence. The therapy included stages: (1) Pre surgical orthodontics- leveling and aligning of the maxillary and mandibular arch with closure of all extraction spaces. (2) Surgical phase-Lefort I osteotomy for superior maxillary impaction, 5 mm of anterior and 3 mm of posterior impaction ofmaxilla was done. (3) Post surgical orthodontics for finishing and detailing. The treatment lasted 16 months; improved facial esthetics significantly; and resulted in a normal occlusion, overjet, and overbite.

Gingival health associated with porcelain veneers on maxillary incisors.

PubMed

Reid, J S; Kinane, D F; Adonogianaki, E

1991-12-01

The possible detrimental effect of acid-etched resin-bonded prostheses and porcelain veneers on plaque accumulation and gingival health is currently disputed. Some workers recommend no tooth preparation prior to veneering whilst others recommend tooth preparation to prevent adverse gingival soft tissue reactions. In order to test the possible gingival effects of veneers placed without tooth preparation, this study was set up to compare gingival health on veneered and non-veneered maxillary incisors within the same individual during periods of normal tooth cleaning and of no tooth cleaning. No significant differences were noted in plaque or gingival indices, or in gingival crevicular fluid volume, between the 72 veneered and non-veneered sites during either study period. The results of this study suggest that placing porcelain veneers on unprepared teeth does not increase the risk of gingivitis.

[Comparison of clinical effects of Co-Cr alloy cast post-core and everStick fiber post in restoration of labially or lingually inclined maxillary central incisor].

PubMed

Qian, Yu-Mei; Zhong, Qun; Chen, Shuang

2017-02-01

To compare the clinical effect of Co-Cr alloy cast post-core and everStick fiber post in restoration of maxillary central incisor with labial or lingual inclination, and provide theoretical basis for clinical application. Ninety-seven labially or lingually inclined maxillary central incisors were treated in our hospital from March 2012 to March 2014. The patients were randomly divided into group A (n=49) and group B (n=48), and received post -core and crown restoration. Patients in group A underwent Co-Cr alloy cast post and core restoration and patients in group B underwent everStick fiber post and core restoration. After two-year of follow-up, root fracture, post break, crown or post dislodgment and gingival marginal discoloration were recorded and analyzed using SPSS 19.0 software package. Chi-square test showed that the success rate of restoration was significantly different between 2 groups (P<0.05). The incidence of root fracture and gingival marginal discoloration of Co-Cr alloy cast post-core was higher than that of everStick fiber post, but there was no significant difference in the incidence of post break, crown or post dislodgment. EverStick fiber post is better than Co-Cr alloy cast post and core to prevent root fracture and gingival marginal discoloration. Its fracture pattern is repairable and favorable for preserving tooth.

Predisposing factors to severe external root resorption associated to orthodontic treatment.

PubMed

Picanço, Gracemia Vasconcelos; de Freitas, Karina Maria Salvatore; Cançado, Rodrigo Hermont; Valarelli, Fabricio Pinelli; Picanço, Paulo Roberto Barroso; Feijão, Camila Pontes

2013-01-01

The aim of this study was to evaluate predisposing factors among patients who developed moderate or severe external root resorption (Malmgren's grades 3 and 4), on the maxillary incisors, during fixed orthodontic treatment in the permanent dentition. Ninety-nine patients who underwent orthodontic treatment with fixed edgewise appliances were selected. Patients were divided into two groups: G1 - 50 patients with no root resorption or presenting only apical irregularities (Malmgren's grades 0 and 1) at the end of the treatment, with mean initial age of 16.79 years and mean treatment time of 3.21 years; G2 - 49 patients presenting moderate or severe root resorption (Malmgren's grades 3 and 4) at the end of treatment on the maxillary incisors, with mean initial age of 19.92 years and mean treatment time of 3.98 years. Periapical radiographs and lateral cephalograms were evaluated. Factors that could influence the occurrence of severe root resorption were also recorded. Statistical analysis included chi-square tests, Fisher's exact test and independent t tests. The results demonstrated significant difference between the groups for the variables: Extractions, initial degree of root resorption, root length and crown/root ratio at the beginning, and cortical thickness of the alveolar bone. It can be concluded that: Presence of root resorption before the beginning of treatment, extractions, reduced root length, decreased crown/root ratio and thin alveolar bone represent risk factors for severe root resorption in maxillary incisors during orthodontic treatment.

Tooth shape preferences in an esthetic smile.

PubMed

Anderson, Kurt M; Behrents, Rolf G; McKinney, Thomas; Buschang, Peter H

2005-10-01

The purpose of this study was to evaluate the contributions of tooth shape to the esthetic smile. Restorative dentists (120), laypeople (102), and orthodontists (113) evaluated a series of color photographs of men's and women's smiles. The photographs were randomly presented to test the effects of 3 different shapes of maxillary incisors and canines on the same patient. For women, orthodontists preferred round and square-round incisors (P < .01), and restorative dentists preferred round incisors (P < or = .03). Laypeople did not discriminate between incisor shapes. For men, all 3 groups preferred square-round incisors (P < or = .042). There was also a tendency for male judges to rate female images more attractive than did female judges. Restorative dentists, orthodontists, and laypeople share similarities and display differences when considering esthetic preferences in tooth shape. Although there was no consensus in preference among the laypeople as a group, their preferences differed from those of the dental professionals.

Prevalence of abnormalities in dental structure, position, and eruption pattern in a population of unilateral and bilateral cleft lip and palate patients.

PubMed

Tortora, Chiara; Meazzini, Maria C; Garattini, Giovanna; Brusati, Roberto

2008-03-01

To evaluate the dental characteristics of patients subjected to a protocol that included early secondary gingivoalveoloplasty (ESGAP). Panoramic radiographs of 87 patients with unilateral cleft lip and palate (UCLP) and 29 with bilateral cleft lip and palate (BCLP) were evaluated. Missing and supernumerary teeth were also quantified on the cleft and noncleft side and in the maxilla and mandible. Crown and root malformations and tooth rotations were quantified. A subsample in permanent dentition was extrapolated to analyze canine eruption patterns. A total of 48.8% of the UCLP patients presented with missing permanent lateral incisors in the cleft area and 6.1% contralaterally. A total of 4.9% presented with missing second maxillary premolars on the cleft site and 1.2% contralaterally. A total of 7.3% presented with supernumerary lateral incisors, and 45% of the BCLP cleft sites presented with missing lateral incisors, while 25% of the cleft sites presented second maxillary premolars agenesis. Five percent of the cleft sites presented with supernumerary lateral incisors. Evaluation of the subsample in permanent dentition showed that 15.5% had a canine retention and 4.4% of the canines had to be surgically exposed. A significant association was observed between canine inclination and retention but not with absence of the lateral incisor. The frequency of dental anomalies in this sample was similar to other cleft populations. As surgical trauma has been suggested to damage forming teeth, the results of this study indicated that ESGAP has no detrimental influence on subsequent dental development.

A preliminary study for determination of three-dimensional root apex position of the maxillary teeth using camera calibration technology

PubMed Central

Oh, Hyun Jun; Yang, Il-Hyung

2016-01-01

Objectives: To propose a novel method for determining the three-dimensional (3D) root apex position of maxillary teeth using a two-dimensional (2D) panoramic radiograph image and a 3D virtual maxillary cast model. Methods: The subjects were 10 adult orthodontic patients treated with non-extraction. The multiple camera matrices were used to define transformative relationships between tooth images of the 2D panoramic radiographs and the 3D virtual maxillary cast models. After construction of the root apex-specific projective (RASP) models, overdetermined equations were used to calculate the 3D root apex position with a direct linear transformation algorithm and the known 2D co-ordinates of the root apex in the panoramic radiograph. For verification of the estimated 3D root apex position, the RASP and 3D-CT models were superimposed using a best-fit method. Then, the values of estimation error (EE; mean, standard deviation, minimum error and maximum error) between the two models were calculated. Results: The intraclass correlation coefficient values exhibited good reliability for the landmark identification. The mean EE of all root apices of maxillary teeth was 1.88 mm. The EE values, in descending order, were as follows: canine, 2.30 mm; first premolar, 1.93 mm; second premolar, 1.91 mm; first molar, 1.83 mm; second molar, 1.82 mm; lateral incisor, 1.80 mm; and central incisor, 1.53 mm. Conclusions: Camera calibration technology allows reliable determination of the 3D root apex position of maxillary teeth without the need for 3D-CT scan or tooth templates. PMID:26317151

Class III correction using an inter-arch spring-loaded module

PubMed Central

2014-01-01

Background A retrospective study was conducted to determine the cephalometric changes in a group of Class III patients treated with the inter-arch spring-loaded module (CS2000®, Dynaflex, St. Ann, MO, USA). Methods Thirty Caucasian patients (15 males, 15 females) with an average pre-treatment age of 9.6 years were treated consecutively with this appliance and compared with a control group of subjects from the Bolton-Brush Study who were matched in age, gender, and craniofacial morphology to the treatment group. Lateral cephalograms were taken before treatment and after removal of the CS2000® appliance. The treatment effects of the CS2000® appliance were calculated by subtracting the changes due to growth (control group) from the treatment changes. Results All patients were improved to a Class I dental arch relationship with a positive overjet. Significant sagittal, vertical, and angular changes were found between the pre- and post-treatment radiographs. With an average treatment time of 1.3 years, the maxillary base moved forward by 0.8 mm, while the mandibular base moved backward by 2.8 mm together with improvements in the ANB and Wits measurements. The maxillary incisor moved forward by 1.3 mm and the mandibular incisor moved forward by 1.0 mm. The maxillary molar moved forward by 1.0 mm while the mandibular molar moved backward by 0.6 mm. The average overjet correction was 3.9 mm and 92% of the correction was due to skeletal contribution and 8% was due to dental contribution. The average molar correction was 5.2 mm and 69% of the correction was due to skeletal contribution and 31% was due to dental contribution. Conclusions Mild to moderate Class III malocclusion can be corrected using the inter-arch spring-loaded appliance with minimal patient compliance. The overjet correction was contributed by forward movement of the maxilla, backward and downward movement of the mandible, and proclination of the maxillary incisors. The molar relationship was corrected by mesialization of the maxillary molars, distalization of the mandibular molars together with a rotation of the occlusal plane. PMID:24934153

Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens.

PubMed

Sidiq, Mohsin; Yousuf, Asif; Bhat, Manohar; Sharma, Rajesh; Bhargava, Neha; Ganta, Shravani

2015-01-01

The aim of this case study was to report a potentially convenient approach instead of a conventional orthodontic procedure for correcting severe rotation of anterior tooth of an 11-year-old Indian boy, with a mixed dentition class I malocclusion. The child reported seeking treatment for severely rotated upper right central incisor with mesiodens and a single tooth crossbite. The supernumerary tooth was first extracted and bondable buttons were placed on the rotated tooth, an appliance composed of a removable plate with Adam's clasp with distal extension and a loop for engagement of elastics was delivered. Circumferential supracrestal fibrotomy was performed on the corrected derotated tooth. Then, Hawley's appliance with a z-spring and posterior bite plane was fabricated and placed for correction of crossbite. Thus, this removable appliance can be a simplified and a cost-effective treatment alternative for derotation of anterior tooth, especially during the mixed dentition period. How to cite this article: Sidiq M, Yousuf A, Bhat M, Sharma R, Bhargava N, Ganta S. Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens. Int J Clin Pediatr Dent 2015;8(3):234-238.

Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens

PubMed Central

Sidiq, Mohsin; Bhat, Manohar; Sharma, Rajesh; Bhargava, Neha; Ganta, Shravani

2015-01-01

ABSTRACT The aim of this case study was to report a potentially convenient approach instead of a conventional orthodontic procedure for correcting severe rotation of anterior tooth of an 11-year-old Indian boy, with a mixed dentition class I malocclusion. The child reported seeking treatment for severely rotated upper right central incisor with mesiodens and a single tooth crossbite. The supernumerary tooth was first extracted and bondable buttons were placed on the rotated tooth, an appliance composed of a removable plate with Adam’s clasp with distal extension and a loop for engagement of elastics was delivered. Circumferential supracrestal fibrotomy was performed on the corrected derotated tooth. Then, Hawley’s appliance with a z-spring and posterior bite plane was fabricated and placed for correction of crossbite. Thus, this removable appliance can be a simplified and a cost-effective treatment alternative for derotation of anterior tooth, especially during the mixed dentition period. How to cite this article: Sidiq M, Yousuf A, Bhat M, Sharma R, Bhargava N, Ganta S. Correction of a Severely Rotated Maxillary Incisor by Elastics in Mixed Dentition Complicated by a Mesiodens. Int J Clin Pediatr Dent 2015;8(3):234-238. PMID:26604544

Comparison of ropivacaine and lidocaine with epinephrine for infiltration anesthesia in dentistry. A randomized study.

PubMed

Krzemiński, Tadeusz Faustyn; Gilowski, Łukasz; Wiench, Rafał; Płocica, Iwona; Kondzielnik, Piotr; Sielańczyk, Andrzej

2011-10-01

To compare the efficacy of maxillary infiltration anesthesia with 0.5% plain ropivacaine or 2% lidocaine with epinephrine 1:100,000. 60 volunteers received 1.8 ml of the anesthetic for infiltration anesthesia of maxillary central and lateral incisors and canine teeth. The onset time and duration of pulp anesthesia were assessed with an electric pulp tester. The duration time of numbness of the upper lip was also monitored. Blood pressure and heart rate were measured before and after administration of the solution. The efficacy of anesthesia of the lateral and central incisors was 100% for both anesthetics. There were small insignificant differences in effectiveness of canine pulp anesthesia. The mean onset time was significantly shorter for ropivacaine--2.2 minutes vs. 5.1 for lidocaine. Ropivacaine also had a significantly longer duration of action--mean time 79.2 minutes. Ropivacaine caused statistically significant increases in blood pressure and heart rate.

Effects of mechanical properties of adhesive resin cements on stress distribution in fiber-reinforced composite adhesive fixed partial dentures.

PubMed

Yokoyama, Daiichiro; Shinya, Akikazu; Gomi, Harunori; Vallittu, Pekka K; Shinya, Akiyoshi

2012-01-01

Using finite element analysis (FEA), this study investigated the effects of the mechanical properties of adhesive resin cements on stress distributions in fiber-reinforced resin composite (FRC) adhesive fixed partial dentures (AFPDs). Two adhesive resin cements were compared: Super-Bond C&B and Panavia Fluoro Cement. The AFPD consisted of a pontic to replace a maxillary right lateral incisor and retainers on a maxillary central incisor and canine. FRC framework was made of isotropic, continuous, unidirectional E-glass fibers. Maximum principal stresses were calculated using finite element method (FEM). Test results revealed that differences in the mechanical properties of adhesive resin cements led to different stress distributions at the cement interfaces between AFPD and abutment teeth. Clinical implication of these findings suggested that the safety and longevity of an AFPD depended on choosing an adhesive resin cement with the appropriate mechanical properties.

Endodontic treatment of a maxillary lateral incisor with a perforating internal resorption by using cone beam computed tomography as a diagnostic aid: a case report.

PubMed

Takita, Toshiya; Tsurumachi, Tamotsu; Ogiso, Bunnai

2011-10-01

This case report presents the endodontic treatment of a maxillary right lateral incisor with a perforating internal resorption in a 50-year-old woman. Radiographically, internal resorption appears as a fairly uniform, radiolucent enlargement of the pulp canal and distortion of the original root canal outline. The use of cone beam computed tomography can help the clinician in making a confirmatory diagnosis and determining the treatment plan before undertaking the actual treatment. After cleaning the root canal space and the resorptive defect by mechanic instrumentation, irrigation, and interim calcium hydroxide dressing, the apical third canal was filled with a gutta-percha point by lateral condensation. The resorptive defect was filled with mineral trioxide aggregate. Follow-up radiographs at 3 years showed adequate repair of the resorption, and the tooth remained asymptomatic.

A Retrospective Study of Association between Peg-shaped Maxillary Lateral Incisors and Dental Anomalies.

PubMed

Kim, Jae-Hwan; Choi, Nam-Ki; Kim, Seon-Mi

The purpose of this study was to investigate the prevalence of peg-shaped maxillary lateral incisors and the incidence of associated dental anomalies in children. We investigated the prevalence of peg-laterals and incidence of associated dental anomalies in 3,834 children aged 7-15 who visited the Department of Pediatric Dentistry from January 2010 to December 2015 and underwent panoramic radiographs. The prevalence of peg-laterals was 1.69% in boys, 1.75% in girls, and 1.72% overall. Among children with peg-laterals, the frequencies of associated dental anomalies were as follows: congenitally missing teeth, 31.8%; dens invaginatus, 19.7%; palatally displaced canines, 12.1%; supernumerary teeth, 7.6%; and transposition, 7.6%. As children with peg-laterals have a higher incidence of other dental anomalies, careful consideration is needed when planning diagnosis and treatment.

Ex vivo fracture resistance of endodontically treated maxillary central incisors restored with fiber-reinforced composite posts and experimental dentin posts

PubMed Central

Kathuria, Ambica; Kavitha, M; Khetarpal, Suchit

2011-01-01

Aim: To compare the fracture resistance of teeth restored with fiber-reinforced composite (FRC) posts and experimental dentin posts milled from human root dentin. Materials and Methods: Thirty maxillary central incisors were divided into three groups of ten each. Twenty teeth were restored with FRC posts and solid dentin posts and numbered as Groups 2 and 3 respectively while Group 1 acted as the control, without any post. The teeth were loaded at 135° angle to their long axes after core build-up and the failure loads were recorded. Results: One-way Analysis of Variance (ANOVA) and Bonferroni multiple comparisons revealed a significant difference among test groups with the control group showing the highest fracture resistance, followed by the dentin post group and lastly the FRC post group. Conclusions: Teeth restored with dentin posts exhibited better fracture resistance than those restored with FRC posts. PMID:22144812

[Comparison of root resorption between self-ligating and conventional brackets using cone-beam CT].

PubMed

Liu, Yun; Guo, Hong-ming

2016-04-01

To analyze the differences of root resorption between passive self-ligating and conventional brackets, and to determine the relationship between passive self-ligating brackets and root resorption. Fifty patients were randomly divided into 2 groups using passive self-ligating brackets or conventional straight wire brackets (0.022 system), respectively. Cone-beam CT was taken before and after treatment. The amount of external apical root resorption of maxillary incisors was measured on CBCT images. Student's t test was performed to analyze the differences of root apical resorption between the 2 groups with SPSS17.0 software package. No significant difference(P> 0.05) in root resorption of maxillary incisors was found between passive self-ligating brackets and conventional brackets. Passive self-ligating brackets and conventional brackets can cause root resorption, but the difference was not significant. Passive self-ligating brackets do not induce more root resorption.

Corono-radicular biological restoration of maxillary central incisors by direct method.

PubMed

Aggarwal, Sonia; Sahoo, Sujit Ranjan; Pandharkar, Kartik

2014-11-01

This case report refers to the esthetic and functional restorations of extensively damaged maxillary central incisors with dental caries in a 32-year-old woman, with the use of posts and crowns made from natural extracted teeth. Proper restoration of such teeth with the use of natural teeth fragments are known as "biological restoration." Biological restorations can be done by using the fragments of the patients own tooth and if that is not available, tooth fragment can be obtained from an extracted tooth. These biological posts and crowns present a low cost option and an alternative technique for the morphofunctional recovery of extensively damaged teeth. There are limitations with the use of natural extracted teeth (homogenous bonding) for restoration such as the difficulty of finding teeth with a similar color and shape as that of the destroyed element, or patient may refuse to accept a tooth fragment from another patient, which prevents execution of the restoration.

Minimally invasive restoration of a maxillary central incisor with a partial veneer.

PubMed

Horvath, Sebastian; Schulz, Claus-Peter

2012-01-01

Minimally invasive treatment modalities allow for the preservation of sound tooth substance. However, by limiting the preparation to the extent of a defect, the transition between restoration and natural tooth may be moved to more visible areas. The materials available for the restoration of a limited defect in the anterior area are either resin composite materials or porcelain. A patient was presented who asked for the replacement of a discolored filling on the maxillary right central incisor. Tooth preparation was limited to the extent of the old filling, and a porcelain partial veneer restoration was fabricated. Despite the horizontal finish line in the middle of the clinical crown, a result could be achieved that was regarded as a success by the patient. This type of restoration proves to be a suitable alternative to direct composite restorations in the anterior area for the reconstruction of a limited defect, eg, due to a dental trauma.

Forced orthodontic extrusion and use of CAD/CAM for reconstruction of grossly destructed crown: A multidisciplinary approach

PubMed Central

Kumar, Rahul; Patil, Suvarna

2012-01-01

The aim of this study is to present a report of a case where forced orthodontic extrusion and computer-aided design and computer-aided manufacturing (CAD/CAM) technique was used for reconstruction of right maxillary central incisor with grossly destructed crown. Aesthetic rehabilitation of a fractured maxillary right central incisor was performed employing a multidisciplinary approach i.e. conventional endodontic treatment followed by orthodontic extrusion and final restoration using CAD-CAM and one piece milled zirconia post and core with full coverage zirconia crown. After the procedure being completed, periapical radiographs taken at 3 month follow up period demonstrated that the post and core remained well adapted to post space and there was a complete healing of periapical lesion. This technique can provide a complete aesthetic rehabilitation of a grossly destructed tooth without hampering the biological width and thus has a better prognosis. PMID:22557823

A clinical report demonstrating the significance of distinguishing a nasopalatine duct cyst from a radicular cyst

PubMed Central

Aparna, Manikkath; Chakravarthy, Arumugam; Acharya, Shashi Rashmi; Radhakrishnan, Raghu

2014-01-01

Endodontic diagnosis is challenging and depends on the organisation of information from the patient history, clinical examination and analysis of the pulp, radiographic and histopathological assessment. A 35-year-old man was endodontically treated for radiolucency in relation to the roots of maxillary central incisors as it was a provisionally diagnosed case of radicular cyst. Since the palatal swelling persisted, the lesion was re-evaluated using relevant diagnostic aids and a diagnosis of nasopalatine duct cyst (NPDC) was made, which was missed during the initial assessment. An erroneous interpretation of cystic radiolucency in relation to maxillary central incisors can often lead to inappropriate treatment planning. This case highlights the relevant aspects in the diagnosis of NPDC when it is mistaken for a radicular cyst and emphasises the need for thorough clinical examination and relevant investigations for periapical radiolucencies of questionable origin before initiating endodontic therapy. PMID:24642171

Diagnosis and management of maxillary incisors affected by incisal wear: an interdisciplinary case report.

PubMed

Bernardo, Jussara Karina; Maia, Elaine A Vilela; Cardoso, Antônio Carlos; de Araújo Júnior, Edson Medeiros; Monteiro Júnior, Sylvio

2002-01-01

In the attempt to restore anterior teeth affected by erosion and bruxism, many clinicians have been frustrated with the constant restorative failures. Frequently, these failures are attributed to the restorative materials employed, especially in cases in which composite resins are used. However, some flaws of the restorations are related to the oversight of occlusal principles. The purpose of this article is to discuss the etiology, signs, and symptoms of incisal wear, with special attention to that caused by bruxism and chemical erosion. Relatively simple management techniques (e.g., occlusal adjustment, adhesive restorations) are proposed, and the diagnosis and management of a representative clinical case is presented. In some cases of bruxism and/or dental erosion, it is possible to acquire space to recuperate the esthetics and function of maxillary incisors affected by incisal wear through a conservative treatment associated with the control of the etiologic factors.

Vitality preservation of an anomalous maxillary central incisor after endodontic therapy.

PubMed

Kaufman, A Y; Kaffe, I; Littner, M M

1984-06-01

Endodontic treatment of a case of fused immature central incisor with a supernumerary tooth with dens in dente is described. Although a chronic dentoalveolar abscess was diagnosed, vitality test signs were positive. Treatment consisted of pulpotomy with calcium hydroxide paste; after 2 1/2 months a permanent root canal filling was placed in the amputated part. Follow-up 2 years postoperatively indicated that the tooth has maintained its vitality. The periapical area is completely healed, and apical closure is evident.

Selecting maxillary anterior tooth width by measuring certain facial dimensions in the Kurdish population.

PubMed

A L-Kaisy, Neda; Garib, Balkees Taha

2016-03-01

One of the most difficult aspects of complete denture fabrication is selecting appropriately sized maxillary anterior teeth that will harmonize with the face. There are no generally accepted or naturally observed principles to guide dentists in this selection. The purpose of this study was to determine whether a relationship exists between various facial measurements and the different single or combined mesiodistal widths of maxillary anterior teeth in a Kurdish population. A total of 65 Kurdish dental students participated in this study. Two standardized digital photographs of the face (relaxed and smiling capture) were recorded. The interpupillary distance (IPD), inner canthal distance (ICD), interalar distance (IAD), and width of the 2 central incisors were determined by Image J software. The mesiodistal width and the combined straight-line width of the centrals, laterals, and canines were measured directly from the casts of the participants with digital calipers. A simple linear regression and the Pearson correlation coefficient were used to investigate the relationship between the particular facial measurement and the widths of the anterior teeth (α=.05). Significant correlations existed between the IPD and different tooth measurements; the highest was with the mean width of the canines (r=0.55). The proposed proportion between the IPD and the central incisor width was 6.93. The golden proportion of the ICD to the width of the central incisors and of the IAD to the straight-line width of the 6 anterior teeth could be used as a dependent parameter in Kurdish men. The IPD can be used to predict the width of anterior teeth in both sexes. In men, the width of the central incisors may be estimated from the ICD and the straight-line width of the 6 anterior teeth from the IAD. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Timing and sequence of primary tooth eruption in children with cleft lip and palate

PubMed Central

KOBAYASHI, Tatiana Yuriko; GOMIDE, Márcia Ribeiro; CARRARA, Cleide Felício de Carvalho

2010-01-01

Objective To determine the timing and sequence of eruption of primary teeth in children with complete bilateral cleft lip and palate. Material and Methods This cross-sectional study was conducted at the Hospital for Rehabilitation of Craniofacial Anomalies of the University of São Paulo, Bauru, SP, Brazil, with a sample of 395 children (128 girls and 267 boys) aged 0 to 48 months, with complete bilateral cleft lip and palate Results Children with complete bilateral clefts presented a higher mean age of eruption of all primary teeth for both arches and both genders, compared to children without clefts. This difference was statistically significant for all teeth, except for the maxillary first molar. Mean age of eruption of most teeth was lower for girls compared to boys. The greatest delay was found for the maxillary lateral incisor, which was the eighth tooth of children with clefts of both genders. Analyzing by gender, the maxillary lateral incisor was the eighth tooth to erupt in girls and the last in boys. Conclusion The results suggest an interference of the cleft on the timing and sequence of eruption of primary teeth. PMID:20856997

Optimizing Maxillary Aesthetics of a Severe Compromised Tooth through Orthodontic Movement and Dental Implants

PubMed Central

de Avila, Erica Dorigatti; Cirelli, Joni Augusto; Cardoso, Mauricio de Almeida; Capelozza-Filho, Leopoldino; Borelli Barros, Luiz Antonio

2014-01-01

Treatment of severe compromised tooth in the maxillary anterior area still poses great challenge to the clinicians. Several treatment modalities have been proposed to restore the function and aesthetics in teeth with advanced periodontal disease. The present study aims to report a case of traumatic injury of a left-maxillary central incisor with ridge preservation, orthodontic movement, and implant therapy. A 45-year-old woman underwent the proposed treatment for her left central incisor: basic periodontal therapy, xenogenous bone graft, and guided bone regeneration (GBR). Six months after the graft procedure, orthodontic movement by means of alignment and leveling was made and a coronal displacement of the gingival margin and vertical bone apposition could be observed after 13 months of active movement. Afterwards, a dental implant was placed followed by a connective tissue graft and immediate provisionalization of the crown. In conclusion, orthodontic movement was effective to improve the gingival tissue and alveolar bone prior to implant placement favoring the aesthetic results. Six years postoperatively, the results revealed height and width alveolar bone gain indicating that the treatment proposed was able to restore all the functional and aesthetic parameters. PMID:24523969

Apical stress distribution on maxillary central incisor during various orthodontic tooth movements by varying cemental and two different periodontal ligament thicknesses: a FEM study.

PubMed

Vikram, N Raj; Senthil Kumar, K S; Nagachandran, K S; Hashir, Y Mohamed

2012-01-01

During fixed orthodontic therapy, when the stress levels in the periodontal ligament (PDL) exceedsan optimum level, it could lead to root resorption. To determine an apical stress incident on the maxillary central incisor during tooth movement with varying cemental and periodontal ligament thickness by Finite Element Method (FEM) modeling. A three dimensional finite element model of a maxillary central incisor along with enamel, dentin, cementum, PDL and alveolar bone was recreated using EZIDCOM and AUTOCAD software. ALTAIR Hyper mesh 7.0 version was used to create the Finite Element meshwork of the tooth. This virtual model was transferred to Finite Element Analysis software, ANSYS where different tooth movements were performed. Cemental thickness at the root apex was varied from 200 μm to 1000 μm in increments of 200 μm. PDL thickness was varied as 0.24 mm and 0.15 mm. Intrusive, Extrusive, Rotation and Tipping forces were delivered to determine an apical stress for each set of parameters. Results indicated that an apical stress induced in the cementum and PDL, increased with an increase in cementum and PDL thickness respectively. Apical stress induced in the cementum remained the same or decreased with an increase in the PDL thickness. Apical stress induced in the PDL decreased with an increase in the cementum thickness. The study concluded that the clinical delivery of an orthodontic forces will cause stress in the cementum and PDL. Hence, it is necessary to limit the orthodontic force to prevent root resorption.

Pattern of maxillary and mandibular proximal enamel thickness at the contact area of the permanent dentition from first molar to first molar.

PubMed

Sarig, Rachel; Vardimon, Alexander D; Sussan, Celine; Benny, Lea; Sarne, Ofer; Hershkovitz, Israel; Shpack, Nir

2015-04-01

Proximal enamel thickness (PET) at the mesial and distal contact areas of the complete permanent dentition has not been previously reported. Anatomic investigation of PET is essential for interproximal reduction treatment. Our objectives were to measure the PETs of the complete maxillary and mandibular dentitions at the contact areas, to compare the PETs of adjacent teeth, and to evaluate the vertical position of each contact area. We evaluated 720 extracted teeth; of these, 109 intact teeth were selected. The mesial and distal contact areas were demarcated, and each tooth was embedded in transparent epoxy resin. Blocks were prepared so that the 2 demarcated contact areas were exposed, and 6 measurements were taken and statistically analyzed. Both jaws showed the same PET pattern characterized by 5 features: PET increased progressively from incisor (0.63 mm) to first molar (1.48 mm). Per tooth, mesial and distal PET did not differ. Total maxillary (26.86 mm) and mandibular (24.52 mm) PETs were similar. Paired PETs at the interproximal interface were similar, with the exception of the lateral incisor-canine interfaces. From incisor to first molar, the contact area becomes located farther gingivally. The existing guideline of maximal 0.5-mm interproximal reduction per 2 adjacent teeth should be kept in the anterior region and could be increased to 1 mm in the posterior region, when an equal amount is removed. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Prevalence of hypodontia in nine- to fourteen-year-old children who attended the Mashhad School of Dentistry.

PubMed

Ajami, Behgat-al-molok; Shabzendedar, Mahboobeh; Mehrjerdian, Maryam

2010-01-01

Hypodontia is defined as the congenital absence of one or a few teeth, and is also the most common anomaly in dental development. This condition occurs either individually or as part of the symptoms of a syndrome, and it is more common in permanent teeth than in deciduous teeth, reporting a prevalence of between 1.6 and 9.6%. The objective of this study is to investigate the prevalence of hypodontia for permanent teeth in nine- to 14-year-old children who attended the Mashhad School of Dentistry in 2007. We conducted this descriptive, analytical, cross-sectional study, to determine the mentioned aims. In this descriptive, cross-sectional study, panoramic radiographs belonging to 600 children (351 girls and 249 boys), aged nine to 14 years, were available for examination. All related findings were recorded in the respective forms. The data were processed using Exact and Chi-square tests. The prevalence of hypodontia in the girls was 9.2%, in the boys 8.8%, and in both sexes combined 9%. The most and the least frequent cases of absent teeth were the mandibular second premolars and the maxillary central incisor (only one child), respectively. The most commonly absent teeth were the mandibular second premolars, the maxillary lateral incisors, the mandibular central incisor, and the maxillary second premolars, in that order. This study showed a high frequency of hypodontia among the understudied population. Thus, due to the complicated treatment, accurate examination of children for on-time diagnosis of this developmental anomaly is crucial.

Psychosocial implications of malocclusion among 12-18 year old secondary school children in Ibadan, Nigeria.

PubMed

Onyeaso, C O; Sanu, O O

2005-03-01

The main purpose of this study was to analyze the current psychosocial implications of malocclusion in Ibadan, Nigeria. The study sample comprised 614 secondary school children (327 males and 287 females) aged 12-18 years (mean age, 14.9 +/- 2.9 SD) who filled in a questionnaire containing general questions about body image and specific inquires concerning self-perception and social implications of dental appearance. The children's occlusions were also assessed using the Dental Aesthetic Index (DAI) and the malocclusion traits related to body image, self-perception, and social implications of dental appearance. Subjects with malocclusion rated only the teeth significantly least satisfactory among other twelve items of body image. The lowest rating was observed in subjects with crowding of the maxillary and mandibular incisor segments. Highly significant differences (P < 0.001) were found between subjects with normal or minor malocclusion and those with marked malocclusion in indicating awareness of malocclusion, dissatisfaction with the appearance of the teeth, and unfavourable appearance of the teeth compared with those of peers. Schoolmates' teasing occurred significantly more often in the presence of malocclusion (P < 0.001). Unfavourable perceptions of the teeth were expressed significantly more often by subjects with anterior maxillary irregularities of up to 1 mm and more, spacing of both maxillary and mandibular incisor segments, midline diastema, crowding (especially of the mandibular incisor segment), anterior open bite and molar relation deviations. It was concluded that certain malocclusions, especially occlusal and space anomalies, may adversely affect body image and self-concept of Nigerian adolescents.

Four-unit fixed dental prostheses replacing the maxillary incisors supported by two narrow-diameter implants - a five-year case series.

PubMed

Moráguez, Osvaldo; Vailati, Francesca; Grütter, Linda; Sailer, Irena; Belser, Urs C

2017-07-01

(1) To determine the survival rate of 10 four-unit fixed dental prostheses (FDPs) replacing the four maxillary incisors, supported by 20 narrow-diameter implants (NDIs), (2) to assess the incidence of mechanical and biological complications, and (3) to evaluate bone level changes longitudinally after final FDP insertion. Ten patients (six women, four men), mean age 49.4 ± 12.6 years, were treated with a four-unit anterior maxillary FDP (six screw-retained; four cemented). Biological parameters, eventual technical complications, radiographic measurements, and study casts were assessed at 1 (baseline), 3, and 5 years after implant placement. A multilevel logistic regression test was performed on clinical parameters and bone level changes (significance level P < 0.05). The 5-year implant and FDP survival rate was 100%. Mean modified plaque index (mPI) values were 0.03 and 0.02 at 3 and 5 years, significantly lower when compared to mPI (0.11 ± 0.31) at 1 year. Mean modified sulcus bleeding index (mSBI) was 0.08, 0.08, and 0.15 over time. Probing depth (PD) values were 1.57, 1.64, and 2.03 mm. Statistically significant differences were found between 1 vs. 5 year (P = 0.0003) and 3 vs. 5 year (P = 0.001). Keratinized mucosa (3.65 mm) remained stable during observation period. DIB mean values were 2.01 ± 0.34, 2.13 ± 0.13, and 2.17 ± 0.38 mm. Patient satisfaction based on visual analog scale revealed favorable fulfillment of overall treatment and esthetic expectations. Two NDIs supporting a four-unit FDP to replace the four missing maxillary incisors may be considered a predictable treatment modality. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Sex determination using the mesio-distal dimension of permanent maxillary incisors and canines in a modern Chilean population.

PubMed

Peckmann, Tanya R; Logar, Ciara; Garrido-Varas, Claudia E; Meek, Susan; Pinto, Ximena Toledo

2016-03-01

The pelvis and skull have been shown to be the most accurate skeletal elements for the determination of sex. Incomplete or fragmentary bones are frequently found at forensic sites however teeth are often recovered in forensic cases due to their postmortem longevity. The goal of the present research was to investigate sexual dimorphism between the mesio-distal dimension of the permanent maxillary incisors and canines for the determination of sex in a contemporary Chilean population. Three hundred and three dental models (126 males and 177 females) from individuals ranging in age from 13 years to 37 years old were used from the School of Dentistry, University of Chile. The statistical analyses showed that only the central incisors and canines were sexually dimorphic. Discriminant function score equations were generated for use in sex determination. The average accuracy of sex classification ranged from 59.7% to 65.0% for the univariate analysis and 60.1% to 66.7% for the multivariate analysis. Comparisons to other populations were made. Overall, the accuracies ranged from 54.4% to 63.3% with males most often identified correctly and females most often misidentified. The determination of sex from the mesio-distal width of incisors and canines in Chilean populations does not adhere to the Mohan and Daubert criteria and therefore would not be presented as evidence in court. Copyright © 2015 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

External root resorption after orthodontic treatment: a study of contributing factors

PubMed Central

Jung, Yun-Hoa

2011-01-01

Purpose The purpose of this study was to examine the patient- and treatment-related etiologic factors of external root resorption. Materials and Methods This study consisted of 163 patients who had completed orthodontic treatments and taken the pre- and post-treatment panoramic and lateral cephalometric radiographs. The length of tooth was measured from the tooth apex to the incisal edge or cusp tip on the panoramic radiograph. Overbite and overjet were measured from the pre- and post-treatment lateral cephalometric radiographs. The root resorption of each tooth and the factors of malocclusion were analyzed with an analysis of variance. A paired t test was performed to compare the mean amount of root resorption between male and female, between extraction and non-extraction cases, and between surgery and non-surgery groups. Correlation coefficients were measured to assess the relationship between the amount of root resorption and the age in which the orthodontic treatment started, the degree of changes in overbite and overjet, and the duration of treatment. Results Maxillary central incisor was the most resorbed tooth, followed by the maxillary lateral incisor, the mandibular central incisor, and the mandibular lateral incisor. The history of tooth extraction was significantly associated with the root resorption. The duration of orthodontic treatment was positively correlated with the amount of root resorption. Conclusion These findings show that orthodontic treatment should be carefully performed in patients who need the treatment for a long period and with a pre-treatment extraction of teeth. PMID:21977469

External root resorption after orthodontic treatment: a study of contributing factors.

PubMed

Jung, Yun-Hoa; Cho, Bong-Hae

2011-03-01

The purpose of this study was to examine the patient- and treatment-related etiologic factors of external root resorption. This study consisted of 163 patients who had completed orthodontic treatments and taken the pre- and post-treatment panoramic and lateral cephalometric radiographs. The length of tooth was measured from the tooth apex to the incisal edge or cusp tip on the panoramic radiograph. Overbite and overjet were measured from the pre- and post-treatment lateral cephalometric radiographs. The root resorption of each tooth and the factors of malocclusion were analyzed with an analysis of variance. A paired t test was performed to compare the mean amount of root resorption between male and female, between extraction and non-extraction cases, and between surgery and non-surgery groups. Correlation coefficients were measured to assess the relationship between the amount of root resorption and the age in which the orthodontic treatment started, the degree of changes in overbite and overjet, and the duration of treatment. Maxillary central incisor was the most resorbed tooth, followed by the maxillary lateral incisor, the mandibular central incisor, and the mandibular lateral incisor. The history of tooth extraction was significantly associated with the root resorption. The duration of orthodontic treatment was positively correlated with the amount of root resorption. These findings show that orthodontic treatment should be carefully performed in patients who need the treatment for a long period and with a pre-treatment extraction of teeth.

[Indirect usage of miniscrew anchorage to intrude overerupted mandibular incisors in a Class II patient with a deep overbite].

PubMed

Ishihara, Yoshihito; Kuroda, Shingo; Sugawara, Yasuyo; Balam, Tarek A; Takano-Yamamoto, Teruko; Yamashiro, Takashi

2016-06-01

Vertical dentoalveolar discrepancies are a common problem in orthodontic patients but are often difficult to treat with traditional mechanics. This case report illustrates the successful treatment of overerupted mandibular incisors via the indirect use of miniscrew anchorage. A woman (age, 22 years 9 months) had chief complaints of maxillary incisor protrusion and crooked teeth. An excessive curve of Spee caused by elongation of the mandibular incisors was also found. The patient was diagnosed with a severe Class II Division 1 malocclusion and a deep overbite. After extraction of the mandibular first premolars and the subsequent leveling phase, the elongated incisors were intruded with a novel method, which involved the combined use of sectional archwires and miniscrews placed in the premolar areas. After the procedure, the mandibular incisors had been intruded by 6.5 mm with no undesirable side effects. The total active treatment period was 42 months. The resultant occlusion and satisfactory facial profile were maintained after 30 months of retention. Our novel intrusion approach shows potential for correcting a deep overbite. © EDP Sciences, SFODF, 2016.

Class II treatment in adults: comparing camouflage orthodontics, dentofacial orthopedics and orthognathic surgery--a cephalometric study to evaluate various therapeutic effects.

PubMed

Kinzinger, Gero; Frye, Linda; Diedrich, Peter

2009-01-01

It was the aim of this clinical study to compare the skeletal and dentoalveolar effects as well as those on the profile of three different treatment approaches in Class II patients (camouflage orthodontics, dentofacial orthopedics, and combined orthodontic and surgical treatment). Our study cohort consisted of 60 young adults presenting a skeletal Class II, Division 1 malocclusion: 20 patients whose overjet was reduced by camouflage following premolar extraction, 20 patients whose occlusions were corrected by placement of a fixed functional orthopedic appliance, and 20 who underwent orthognathic surgery (bilateral sagittal split osteotomy of the mandible without genioplasty). We documented the therapeutic progress using cephalometry. Each patient group achieved a reduction in overjet via their respective treatment. While no treatment-related changes in the maxillary area were assessable, the effects on the mandible differed. We observed advancement of the bony chin and an increase in mandibular length in the sagittal-diagonal dimension in the surgical and functional orthopedic groups. However, the extent of the treatment-related changes was significant only in the group of patients that had undergone orthognathic surgery. Only the surgical group presented changes in vertical relationships. Incisor repositioning as an outcome of the respective treatments differed fundamentally, with those in the surgical group revealing significant protrusion of the upper incisors. The maxillary incisors were retruded and mandibular incisors proclined in the functional orthopedic group, whereas the upper and lower incisors both retruded significantly in the extraction group. Soft-tissue remodeling bore no linear relationship to treatment-induced skeletal and dental effects. Still, orthognathic surgery led to the most marked profile changes. Treatment using fixed functional orthopedic appliances reduced the convexity of the soft-tissue profile at least moderately. Camouflage orthodontics, on the other hand, resulted in an increase in the nasolabial angle. In young adults fixed functional appliances are a treatment alternative to extraction therapy but to a lesser extent to orthognathic surgery. Because of their limited skeletal effects and minor changes in the profile they are indicated only in patients with a moderately severe Class II malocclusion. Pre-treatment proclined mandibular incisors limit the scope of indications for fixed functional appliances, as they can cause an increase in lower incisor proclination. Significant reductions in profile convexity are achievable only by combined orthodontic and surgical treatment of the malocclusion. When performing camouflage orthodontics in conjunction with maxillary premolar extractions in adults, an increase in the nasolabial angle, which is often esthetically undesirable, has to be discussed as a potential side effect and has to be taken into account when considering the different therapeutic approaches.

Antimicrobial activity of Calendula officinalis, Camellia sinensis and chlorhexidine against the adherence of microorganisms to sutures after extraction of unerupted third molars.

PubMed

Faria, Raquel Lourdes; Cardoso, Lincoln Marcelo Lourenço; Akisue, Gokithi; Pereira, Cristiane Aparecida; Junqueira, Juliana Campos; Jorge, Antonio Olavo Cardoso; Santos Júnior, Paulo Villela

2011-10-01

The objective of this study was to compare the antimicrobial effect of mouthwashes containing Calendula officinalis L., Camellia sinensis (L.) Kuntze and 0.12% chlorhexidine digluconate on the adherence of microorganisms to suture materials after extraction of unerupted third molars. Eighteen patients with unerupted maxillary third molars indicated for extraction were selected (n=6 per mouthwash). First, the patients were subjected to extraction of the left tooth and instructed not to use any type of antiseptic solution at the site of surgery (control group). After 15 days, the right tooth was extracted and the patients were instructed to use the Calendula officinalis, Camellia sinensis or chlorhexidine mouthwash during 1 week (experimental group). For each surgery, the sutures were removed on postoperative day 7 and placed in sterile phosphate-buffered saline. Next, serial dilutions were prepared and seeded onto different culture media for the growth of the following microorganisms: blood agar for total microorganism growth; Mitis Salivarius bacitracin sucrose agar for mutans group streptococci; mannitol agar for Staphylococcus spp.; MacConkey agar for enterobacteria and Pseudomonas spp., and Sabouraud dextrose agar containing chloramphenicol for Candida spp. The plates were incubated during 24-48 h at 37ºC for microorganism count (CFU/mL). The three mouthwashes tested reduced the number of microorganisms adhered to the sutures compared to the control group. However, significant differences between the control and experimental groups were only observed for the mouthwash containing 0.12% chlorhexidine digluconate. Calendula officinalis L. and Camellia sinensis (L.) Kuntze presented antimicrobial activity against the adherence of microorganisms to sutures but were not as efficient as chlorhexidine digluconate.

Antimicrobial activity of Calendula officinalis, Camellia sinensis and chlorhexidine against the adherence of microorganisms to sutures after extraction of unerupted third molars

PubMed Central

FARIA, Raquel Lourdes; CARDOSO, Lincoln Marcelo Lourenço; AKISUE, Gokithi; PEREIRA, Cristiane Aparecida; JUNQUEIRA, Juliana Campos; JORGE, Antonio Olavo Cardoso; SANTOS JÚNIOR, Paulo Villela

2011-01-01

Objective The objective of this study was to compare the antimicrobial effect of mouthwashes containing Calendula officinalis L., Camellia sinensis (L.) Kuntze and 0.12% chlorhexidine digluconate on the adherence of microorganisms to suture materials after extraction of unerupted third molars. Material and Methods Eighteen patients with unerupted maxillary third molars indicated for extraction were selected (n=6 per mouthwash). First, the patients were subjected to extraction of the left tooth and instructed not to use any type of antiseptic solution at the site of surgery (control group). After 15 days, the right tooth was extracted and the patients were instructed to use the Calendula officinalis, Camellia sinensis or chlorhexidine mouthwash during 1 week (experimental group). For each surgery, the sutures were removed on postoperative day 7 and placed in sterile phosphate-buffered saline. Next, serial dilutions were prepared and seeded onto different culture media for the growth of the following microorganisms: blood agar for total microorganism growth; Mitis Salivarius bacitracin sucrose agar for mutans group streptococci; mannitol agar for Staphylococcus spp.; MacConkey agar for enterobacteria and Pseudomonas spp., and Sabouraud dextrose agar containing chloramphenicol for Candida spp. The plates were incubated during 24-48 h at 37ºC for microorganism count (CFU/mL). Results The three mouthwashes tested reduced the number of microorganisms adhered to the sutures compared to the control group. However, significant differences between the control and experimental groups were only observed for the mouthwash containing 0.12% chlorhexidine digluconate. Conclusions Calendula officinalis L. and Camellia sinensis (L.) Kuntze presented antimicrobial activity against the adherence of microorganisms to sutures but were not as efficient as chlorhexidine digluconate. PMID:21986652

Ectopic eruption of permanent incisors after predecessor pulpectomy: five cases.

PubMed

Tannure, Patricia Nivoloni; Fidalgo, Tatiana Kelly da Silva; Barcelos, Roberta; Gleiser, Rogerio; Primo, Laura Guimaraes

2011-01-01

Pulpectomy in primary teeth is a common technique that preserves teeth in the oral environment and maintains or recovers periapical tissues to a healthy condition. This article describes the ectopic eruption of permanent incisors whose primary predecessors underwent pulpectomy using ZOE filler paste. In a group of 135 teeth that received pulpectomy therapy due to caries, 10 primary maxillary incisors had overretention and were followed for at least 3.5 years (mean time of 4.2 years), both clinically and radiographically, until the permanent teeth erupted. The proposed treatment included extraction of the overretained primary incisors based on permanent successor eruption chronology and contralateral eruption. Seven permanent teeth erupted ectopically. Autocorrection of the permanent tooth positions was observed in five cases. It can be concluded that periodic clinical and radiographic assessments are essential to verify radicular and filling paste resorptions and to avoid overretention and any subsequent malocclusion.

A Conservative Approach to the Management of a Dental Trauma for Immediate Natural Esthetics.

PubMed

Mahesh Patni, Pallav; Jain, Pradeep; Jain Patni, Mona

2016-06-01

The fracture of front teeth is one of the routine presentations of traumatic injuries. The treatment of a fractured tooth involving the pulp includes root canal therapy and post placement followed by core build-up or by the extraction of the fractured tooth if it is not restorable. We report a case of an adult male who had traumatized both his maxillary central incisors following a blow experienced during domestic violence. He had lost a fractured fragment of the right central incisor, while the left incisor had complicated fractures with fragments retained attached to the soft tissue. Following radiovisiography (RVG), both incisors were conservatively treated in a single visit by reattachment and post and core techniques. The treatment reported for reattachment of the tooth fractures and post and core techniques are reasonably easy while providing immediate and lasting results in patients' regaining of social confidence and functionality.

A comparative anchorage control study between conventional and self-ligating bracket systems using differential moments.

PubMed

de Almeida, Marcio Rodrigues; Herrero, Francisco; Fattal, Amine; Davoody, Amirparviz R; Nanda, Ravindra; Uribe, Flavio

2013-11-01

To compare the efficiency in anchorage preservation of conventional and self-ligating brackets after the extraction of first maxillary premolars using differential moment mechanics. Thirty-eight patients requiring extraction of maxillary first premolars and maximum anchorage during space closure were evaluated based on bracket type. Group 1, comprising 23 patients, was bonded with preadjusted conventional brackets (CBs) with a slot of 0.022-inch × 0.030-inch. Group 2 comprised 15 patients who were bonded with 0.022 inch preadjusted self-ligating brackets (SLBs). Patients in both groups received a nickel titanium (NiTi) intrusion arch and a 150 g NiTi closing coil spring for separate canine retraction, followed by a continuous mushroom loop archwire to retract the incisors. Lateral cephalograms were available at the start of treatment (T1) and at the completion of space closure (T2). Statistical comparisons were performed with paired and unpaired Student's t-tests. No significant differences were found between the groups in maxillary molars anchorage loss (3.87 ± 1.35 mm and 3.65 ± 1.73 mm for the CB and SLB groups, respectively). Only the mean vertical movement of the tip of the incisor was significantly different between the groups (CB  =  -0.92 ± 1.46 mm; SLB  =  0.56 ± 1.65 mm). There were no significant differences in the amount of anchorage loss of the maxillary first molars between SLB and CB systems during space closure using differential moments.

Natural reversal of tooth discoloration and pulpal response to testing following removal of a miniscrew implant for orthodontic anchorage: a case report.

PubMed

Qin, Y J; Zhang, G D; Zhang, Y; Ping, Y F; Zhao, C Y

2016-04-01

To highlight the reversal of signs suggesting pulpal necrosis following removal of a mini-implant without endodontic intervention. A 23-year-old woman presented with a class III malocclusion, with crowded and malformed teeth and excessive gingival display. During orthodontic treatment, a Tomas orthodontic miniscrew was placed between the root apices of the maxillary central incisors. This was carried out by an orthodontic specialist who had treated more than 700 patients (with more than 2000 mini-implants) over the past 9 years. After 2 weeks of treatment, the right maxillary central incisor discoloured and did not respond to electrical pulp tests (EPT) but was sensitive to endo-ice. The miniscrew was removed under local anaesthesia. Teeth 11 and 21 were fixed with ligation wire, and glass-ionomer cement (GIC) was added to the occlusal surfaces of the first and second maxillary molars to heighten the occlusion and disclude the maxillary anterior teeth. After 4 months, the colour and pulp reactions to EPT and endo-ice of tooth 11 returned to normal. Because the use of a miniscrew had appeared to damage the pulp, subsequent a conservative orthodontic treatment using, traditional 'J' hooks was used and achieved satisfactory results. After 23 months of orthodontic treatment, the treatment was complete and a 15-month follow-up showed a successful outcome. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Prevalence of mesiodens in orthodontic patients with deciduous and mixed dentition and its association with other dental anomalies.

PubMed

Lara, Tulio Silva; Lancia, Melissa; da Silva Filho, Omar Gabriel; Garib, Daniela Gamba; Ozawa, Terumi Okada

2013-01-01

To determine the prevalence of mesiodens in deciduous and mixed dentitions and its association with other dental anomalies. Panoramic radiographs of 1,995 orthodontic patients were analyzed retrospectively, obtaining a final sample of 30 patients with mesiodens. The following aspects were analyzed: gender; number of mesiodens; proportion between erupted and non-erupted mesiodens; initial position of the supernumerary tooth; related complications; treatment plan accomplished; and associated dental anomalies. The frequency of dental anomalies in the sample was compared to reference values for the general population using the chi-square test, with a significance level set at 5%. The prevalence of mesiodens was 1.5% more common among males (1.5:1). Most of the mesiodens were non-erupted (75%) and in a vertical position, facing the oral cavity. Extraction of the mesiodens was the most common treatment. The main complications associated with mesiodens were: delayed eruption of permanent incisors (34.28%) and midline diastema (28.57%). From all the dental anomalies analyzed, only the prevalence of maxillary lateral incisor agenesis was higher in comparison to the general population. There was a low prevalence of mesiodens (1.5%) in deciduous and mixed dentition and the condition was not associated with other dental anomalies, except for the maxillary lateral incisor agenesis.

Congenitally Missing Maxillary Lateral Incisors: Update on the Functional and Esthetic Parameters of Patients Treated with Implants or Space Closure and Teeth Recontouring

PubMed Central

Pini, Núbia Inocencya Pavesi; Marchi, Luciana Manzotti De; Pascotto, Renata Corrêa

2015-01-01

Maxillary lateral incisor agenesis (MLIA) is a condition that affects both dental esthetics and function in young patients, and represents an important challenge for clinicians. Although several treatment options are available, the mesial repositioning of the canines followed by teeth recontouring into lateral incisors; or space opening/maintenance followed by implant placement have recently emerged as two important treatment approaches. In this article, the current and latest literature has been reviewed in order to summarize the functional and esthetic outcomes obtained with these two forms of treatment of MLIA patients in recent years. Indications, clinical limitations and the most important parameters to achieve the best possible results with each treatment modality are also discussed. Within the limitations of this review, it is not possible to assert at this point in time that one treatment approach is more advantageous than the other. Long-term followup studies comparing the existing treatment options are still lacking in the literature, and they are necessary to shed some light on the issue. It is possible, however, to state that adequate multidisciplinary diagnosis and planning are imperative to define the treatment option that will provide the best individual results for patients with MLIA. PMID:25646137

Human permanent teeth are divided into two parts at the cemento-enamel junction in the divine golden ratio.

PubMed

Anand, Rahul; Sarode, Sachin C; Sarode, Gargi S; Patil, Shankargouda

2017-01-01

The aim of this study is to find out whether tooth length (crown length + root length) follows the rule of most divine and mysterious phi (ϕ) or the golden ratio. A total of 140 teeth were included in the study. The crown-root ratio was manually calculated using vernier caliper and its approximation to golden ratio or the divine number phi (ϕ) was examined. The average root-crown ratio (R/C) for maxillary central incisor was 1.627 ± 0.04, and of its antagonist, mandibular central incisor was 1.628 ± 0.02. The tooth-root ratio (T/R) for the same was 1.609 ± 0.016 and 1.61 ± 0.008, respectively. Similar values were appreciated for lateral incisors where the R/C ratio in the maxillary and mandibular teeth was 1.632 ± 0.015 and 1.641 ± 0.012 and the T/R ratio was 1.606 ± 0.005 and 1.605 ± 0.005, respectively. On measuring the tooth length in linear fashion from the cusp tip to the root apex, we found that the tooth was divided into two parts at the cemento-enamel junction in the golden ratio. This information can be exploited in restorative and implant dentistry in future.

Stable region for maxillary dental cast superimposition in adults, studied with the aid of stable miniscrews.

PubMed

Chen, G; Chen, S; Zhang, X Y; Jiang, R P; Liu, Y; Shi, F H; Xu, T M

2011-05-01

To identify a stable and reproducible reference region to superimpose serial maxillary dental models in adult extraction cases. Fifteen adult volunteers were enrolled. To reduce protrusion, bilateral maxillary first premolars were extracted in all volunteers. Each volunteer received six miniscrews, including two loaded miniscrews used to retract anterior teeth and four unloaded miniscrews. Impressions for maxillary models were taken at T1 (1 week after miniscrew placement) and T2 (17 months later). Dental models were created and then scanned using a laser scanner. Stability of the miniscrews was evaluated, and dental models were registered using stationary miniscrews. The palatal region, where deviation was within 0.5 mm in all subjects, was determined to be the stable region. Reproducibility of the new palatal region for 3D digital model superimposition was evaluated. Deviation of the medial 2/3 of the palatal region between the third rugae and the line in contact with the distal surface of the bilateral maxillary first molars was within 0.5 mm. Tooth movement of 15 subjects was measured to evaluate the validity of the new 3D superimposition method. Displacements were 8.18 ± 2.94 mm (central incisor) and 2.25 ± 0.73 mm (first molar) measured by miniscrew superimposition, while values of 7.81 ± 2.53 mm (central incisor) and 2.29 ± 1.03 mm (first molar) were measured using the 3D palatal vault regional superimposition method; no significant difference was observed. The medial 2/3 of the third rugae and the regional palatal vault dorsal to it is a stable region to register 3D digital models for evaluation of orthodontic tooth movement in adult patients. © 2011 John Wiley & Sons A/S.

Parents' ability to recall past injuries to maxillary primary incisors in their children.

PubMed

Sheinvald-Shusterman, Kineret; Holan, Gideon

2012-08-01

To evaluate the ability of parents to recall past injuries to their children's maxillary primary incisors. Clinical and radiographic trauma-related major and minor signs observed in the first dental visit of 727 preschool children were recorded. Major signs included crown fracture, coronal discoloration, internal resorption, pulp canal obliteration, swelling, fistula, and periapical lesion. Minor signs included enamel cracks, sensitivity to percussion, dull or metallic sound on percussion, increased mobility, and widened periodontal ligament. Children were divided into groups: CT = certainly traumatized (presenting with at least one major sign or a combination of three minor signs), PT = probably traumatized (presenting with one or two minor signs) and NT = not traumatized. Accompanying parents were asked to recall past injuries to their children's teeth. Possible replies were 'no', 'yes' and 'probably yes'. Disagreement when both parents were present was recorded as 'yes'. Crown fractures involving dentin, coronal discoloration, swelling and fistula were defined as 'observable signs of trauma'. One-hundred and eighteen children were accompanied by fathers, 411 by mothers and 198 by both. The CT group comprised 464 children; the PT group, 103; and the NT group, 160, with no statistically significant differences by gender. Parents' positive recall was similar for boys (33.3%) and girls (31.0%). Mothers recalled trauma in 32.6% and fathers in 27.1% of their children. Parents failed to recall trauma in 52.6% of the CT-group children and in 43.5% of the PT-group children. Parents failed to recall trauma in 37.6% of the children who had observable signs of trauma. Parents' recall of dental trauma occurring in their children's maxillary primary incisors was reliable in <50% of the cases. © 2011 John Wiley & Sons A/S.

Risk factors for incidence and severity of white spot lesions during treatment with fixed orthodontic appliances.

PubMed

Chapman, Joshua A; Roberts, W Eugene; Eckert, George J; Kula, Katherine S; González-Cabezas, Carlos

2010-08-01

The development of incipient caries, or white spot lesions (WSLs), is a significant clinical problem in orthodontics. The purpose of this study was to retrospectively determine the incidence and severity of WSLs by examining pretreatment and posttreatment digital photographs. A total of 332 consecutive finished patients from a university graduate orthodontic clinic were evaluated. Initial and final digital images were compared to assess WSLs. The facial surfaces of the anterior 8 maxillary teeth were analyzed. The percentage area of WSL per total facial tooth surface was calculated to control for magnification differences. Reliability of the method was assessed by comparison with direct clinical examination data. Patient and operator factors, and treatment complexity and outcomes were evaluated as predictors of WSL incidence and severity. Agreement between direct clinical examination and digital photo data was excellent, with an intraclass correlation coefficient 0.88 and a 0.3% average difference between methods. The incidence of at least 1 WSL on the labial surface of the anterior 8 maxillary teeth was 36%. The order of incidence was lateral incisor (34%), canine (31%), premolar (28%), and central incisor (17%). Risk factors for the development of incipient caries during orthodontic treatment were young age (preadolescent) at the start of treatment, number of poor hygiene citations during treatment, unfavorable clinical outcome score, white ethnic group, and inadequate oral hygiene at the initial pretreatment examination. The use of computer software to evaluate digital photos retrospectively is a valid method for assessing the incidence and severity of WSLs on the maxillary anterior incisors, canines, and premolars. Copyright (c) 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Blood-flow change and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction: a pilot study.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2004-11-01

To examine the change in blood flow and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction. The subjects included 5 patients undergoing high Le Fort I osteotomy and maxillary distraction (D-group) and a reference group of 14 patients who underwent a common single-segment Le Fort I osteotomy, 1-stage maxillary advancement, and mandibular setback surgery (C-group). Eleven (D-group) and 54 (C-group) maxillary incisors were assessed preoperatively and at 1-7 days, 14 days, and 3 months postoperatively. Pulpal blood flow (PBF) was measured by laser Doppler flowmetry, and pulpal sensibility (PS) was investigated by electrodiagnostics. From postoperative days 1 to 5 (the latency period), the PBF tended to be higher in the D-group than in the C-group. From day 6 to 3 months postoperatively (during and after maxillary distraction), the PBF values of the 2 groups were similar. The PS remained negative up to 14 days postoperatively in both groups. However, at 3 months after the operation, a higher proportion (90.9%) of teeth in the D-group was positive for PS. These results suggest that maxillary distraction is a favorable technique for maintenance of PBF and recovery of PS in the maxillary teeth after surgery.

Soft tissue, skeletal and dentoalveolar changes following conventional anchorage molar distalization therapy in class II non-growing subjects: a multicentric retrospective study.

PubMed

Fontana, Mattia; Cozzani, Mauro; Caprioglio, Alberto

2012-05-01

The purpose of this retrospective prolective study is to evaluate soft tissue, dentoalveolar and skeletal vertical changes following conventional anchorage molar distalization therapy in adult patients. Forty-six patients (34 females, mean age 25 years 6 months; and 12 males, mean age 28 years 4 months) were recruited from 4 specialists Board Certified. All subjects underwent molar distalization therapy according different distalization mechanics. Cephalometric headfilms were available for all subjects before (T0) and at the end of comprehensive treatment (T1). The initial and final measurements and treatment changes were compared by means of a paired t-test or a paired Wilcoxon test. Mean total treatment time was 3 years 3 months ± 8 months. Maxillary first and second molars distalized 2.16±0.84 mm and 2.01±0.69 mm respectively, but also maintained a slight distal tipping of 1.45° (min 2.22°, max -6.45°) and 3.35° (min 0.47°, max -15.48°) at the end of treatment. Distal movement of maxillary first molar contributed 57.6% to molar correction, and 42.4% was due to a mesial movement of mandibular first molar (1.59±0.46 mm). Dentoalveolar changes contributed to overjet correction; maxillary incisors retroclined 5.78°±3.17°, lower incisors proclined 7.49°±4.52° and occlusal plane rotated down and backward 2.32°±2.10°. A significant clockwise rotation of the mandible (1.97°±1.32°) and a significant increase in lower facial height (3.35±1.48) mm were observed. Upper lip slightly retruded (-1.76±1.70 mm) and lower lip protruded (0.96±0.99 mm) but these changes had a negligible impact on clinical appearance. Although maxillary molar distalization therapy can be performed in adult patients, significant proclination of the lower incisors, clockwise rotation of the occlusal plane and increase in vertical facial dimension should be expected. Nevertheless, in absence of maxillary third molars and in presence of mandibular third molars this procedure could be recommended. Copyright © 2011 Società Italiana di Ortodonzia SIDO. Published by Elsevier Srl. All rights reserved.

Root resorption of maxillary incisors retracted with and without skeletal anchorage.

PubMed

Barros, Sérgio Estelita; Janson, Guilherme; Chiqueto, Kelly; Baldo, Vitor Oliveira; Baldo, Taiana Oliveira

2017-02-01

Our objective was to compare root resorption degree of the maxillary central incisors retracted with and without skeletal anchorage. This nonrandomized historical control study included 37 patients requiring maximum anterior retraction and treated with extraction of 2 maxillary premolars. Group 1 consisted of 22 patients (11 male, 11 female) in whom anterior retraction was performed without skeletal anchorage, and group 2 included 15 patients (3 male, 12 female) treated with skeletally anchored anterior retraction. Periapical radiographs were used to evaluate root resorption degree by a scoring system. The groups were compared regarding the resorption score and resorption degree distribution with the Mann-Whitney U test, chi-square test, and Z test on proportions. There was no statistically significant intergroup difference regarding root resorption, but the number of patients with severe and extreme root resorption degrees was significantly greater in group 2. Although the root resorption degree of the skeletal anchorage group was not significantly different from the group without skeletal anchorage, the number of patients with severe to extreme resorption in the first group was significantly greater. Therefore, careful clinical monitoring of skeletally anchored anterior retraction is needed, especially when there are known root resorption predisposing factors. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Reversed palatal perforation by upper incisors in ageing blind mole-rats (Spalax ehrenbergi)

PubMed Central

ZURI, I.; TERKEL, J.

2001-01-01

Blind mole-rats (Spalax ehrenbergi) are fossorial solitary rodents that present striking morphological, physiological and behavioural adaptations to the subterranean environment in which they live. Previous studies have shown that mole-rats are specialised in tooth-digging. The rapid eruption-rate of their incisors has evolved to compensate for their excessive wear by excavation. Males use their incisors more than females for digging and fighting, and their rate of incisor eruption is significantly more rapid than in females. Since mole-rats use their incisors for digging throughout the year, we suggest that continuous mechanical pressure on their oral tissues concentrated at the apical sites of the upper incisors leads to cell and tissue fatigue. We provide evidence for 5 stages of palatal perforation by the upper incisors at their apical sites, with maximum perforation characterising aged males. Interspecies comparisons with 7 other fossorial and semi-fossorial rodent species, and with beavers, which expose their incisors to enormous mechanical pressure, revealed that this palatal perforation is unique to the male mole-rat. We suggest that while the fast eruption rate of incisors in the mole-rat compensates for the rapid wear resulting from digging, evolutionary adaptation to continuous tooth-digging is still ongoing, since the physical pressure of digging at the apical sites of the upper incisors leads to tissue destruction, breakage of the palatal bone and possibly to death, as a result of maxillary inflammation. PMID:11760890

Zirconia crowns for rehabilitation of decayed primary incisors: an esthetic alternative.

PubMed

Ashima, G; Sarabjot, K Bhatia; Gauba, K; Mittal, H C

2014-01-01

Esthetic management of extensively decayed primary maxillary anterior teeth requiring full coronal coverage restoration is usually challenging to the pediatric dentists especially in very young children. Many esthetic options have been tried over the years each having its own advantages, disadvantages and associated technical, functional or esthetic limitations. Zirconia crowns have provided a treatment alternative to address the esthetic concerns and ease of placement of extra-coronal restorations on primary anterior teeth. The present article presents a case where grossly decayed maxillary primary incisors were restored esthetically and functionally with ready made zirconia crowns (ZIRKIZ, HASS Corp; Korea). After endodontic treatment the decayed teeth were restored with zirconia crowns. Over a 30 months period, the crowns have demonstrated good retention and esthetic results. Dealing with esthetic needs in children with extensive loss of tooth structure, using Zirconia crowns would be practical and successful. The treatment described is simple and effective and represents a promising alternative for rehabilitation of decayed primary teeth.

16-Year follow-up of an avulsed maxillary central incisor after replantation following 10-h storage: An unusual case.

PubMed

Kırzıoğlu, Zuhal; Erken Güngör, Özge; Erdoğan, Yıldırım

2017-07-01

Tooth avulsion is a type of dental injury defined as the complete displacement of a tooth out of the alveolar socket, and the lack of prompt treatment measures can result in the loss of function, poor quality of life, and psychological and social problems. However, several factors may not permit the immediate replantation of an avulsed tooth; therefore, delayed replantation has emerged as an alternative to meet the esthetic, functional, and psychological demands of patients. Here it was described that the successful replantation of an avulsed maxillary central incisor in a 9-year-old boy who presented at the clinic with the tooth stored in unfavorable conditions as dry and then in olive oil-milk mixture almost 10 h after the event. The tooth has remained in its socket healthy for 16 years after treatment. The patient was satisfied with both esthetics and function. © 2017 Special Care Dentistry Association and Wiley Periodicals, Inc.

Four-year follow-up of a polymethyl methacrylate-based bone cement graft for optimizing esthetics in maxillary anterior implants: a case report.

PubMed

Torres, Érica Miranda De; Naldi, Luis Fernando; Bernades, Karina Oliveira; Carvalho, Alexandre Leite

2017-01-01

Tooth loss promotes bone and gingival tissue remodeling, thus breaking the harmony between the residual ridge and natural teeth. This is critical in the anterior region of the mouth, and the integration of several dental specialties is often essential to successful rehabilitation with implants. This article describes a multidisciplinary approach to implant-supported oral rehabilitation in the maxillary anterior region, presenting a new technique for optimizing esthetics in implants. A 19-year-old woman was missing her central and lateral incisors and had 2 dental implants in the lateral incisor sites. The patient exhibited deficient thickness of the alveolar edge, loss of lip support, and absence of gingival architecture, and the implants were improperly placed. A multidisciplinary team created a correct emergence profile through a polymethyl methacrylate-based bone cement graft along with connective tissue grafts. This technique may be a useful therapeutic adjunct in dental implantology, showing good predictability and regular healing procedures.

Fifteen-year Clinical Follow-up of Restoration of Extensive Cervical Resorption in a Maxillary Central Incisor.

PubMed

Reston, E G; Bueno, Rpr; Closs, L Q; Zettermann, J

Internal bleaching in endodontically treated teeth requires care and protection to prevent harm to the periodontal ligament due to peroxide and may result in external root resorption. There is a myriad of treatment options when this occurs, such as monitoring, extraction, and subsequent rehabilitation with implants or fixed prosthodontics. In some cases, such as the one described here, a conservative attempt to maintain the tooth as a single structure can be made by sealing the resorptive defect. In the present case, we show a multidisciplinary approach where orthodontics, periodontics, and restorative dentistry were involved in treating the maxillary right central incisor (#8) of a 65-year-old patient with extensive cervical resorption, whose chief complaint was esthetics. The proposed treatment was extrusion of the tooth followed by curettage and restoration of the defect with glass ionomer cement. The patient has been followed for 15 years with no signs of recurrence, maintenance of periodontal health, and patient satisfaction with the esthetic outcome.

Aesthetic Rehabilitation of a Complicated Crown-Root Fracture of the Maxillary Incisor: Combination of Orthodontic and Implant Treatment

PubMed Central

de Avila, Érica Dorigatti; de Molon, Rafael Scaf; Cardoso, Mauricio de Almeida; Capelozza Filho, Leopoldino; Campos Velo, Marilia Mattar de Amoêdo; Mollo, Francisco de Assis; Borelli Barros, Luiz Antonio

2014-01-01

The aim of this paper is to present a complex rehabilitation, of fractured tooth, with implants in anterior region considering the orthodontics extrusion to clinical success. At 7 years old, the patient fractured the maxillary left central incisor and the dentist did a crown with the fragment. Twenty years later, the patient was referred to a dental clinic for orthodontic treatment, with the chief complaint related to an accentuated deep bite, and a professional started an orthodontic treatment. After sixteen months of orthodontic treatment, tooth 21 fractured. The treatment plan included an orthodontic extrusion of tooth 21 and implant placement. This case has been followed up and the clinical and radiographic examinations show excellence esthetic results and satisfaction of patient. The forced extrusion can be a viable treatment option in the management of crown root fracture of an anterior tooth to gain bone in a vertical direction. This case emphasizes that to achieve the esthetic result a multidisciplinary approach is necessary. PMID:24872900

Oral Rehabilitation of an Osteopetrosis Patient with Osteomyelitis

PubMed Central

Celakil, Tamer; Dogan, Merve; Rohlig, Bilge Gokcen; Evlioglu, Gulumser; Keskin, Haluk

2016-01-01

Osteopetrosis is a congenital disorder characterized by increasing osteoclastic function resulting in osteomyelitis in the jaws. Orofacial findings in osteopetrosis patients are unerupted, malformed, or delayed teeth and many dental caries due to vulnerable enamel and dentin and osteomyelitis. Many reports have described that maxilla is an uncommon site of occurrence for osteomyelitis due to cortical bone morphology and collateral circulation. This report aims to discuss clinical features and prosthodontic management of a patient with clinical features of adult form of osteopetrosis and osteomyelitis in both jaws. The patient has reported better masticatory and speech efficiency with removable dentures in maxillary and mandibular jaw and also self-esteem improvement and family interaction. PMID:27148461

Oral Rehabilitation of an Osteopetrosis Patient with Osteomyelitis.

PubMed

Celakil, Tamer; Dogan, Merve; Rohlig, Bilge Gokcen; Evlioglu, Gulumser; Keskin, Haluk

2016-01-01

Osteopetrosis is a congenital disorder characterized by increasing osteoclastic function resulting in osteomyelitis in the jaws. Orofacial findings in osteopetrosis patients are unerupted, malformed, or delayed teeth and many dental caries due to vulnerable enamel and dentin and osteomyelitis. Many reports have described that maxilla is an uncommon site of occurrence for osteomyelitis due to cortical bone morphology and collateral circulation. This report aims to discuss clinical features and prosthodontic management of a patient with clinical features of adult form of osteopetrosis and osteomyelitis in both jaws. The patient has reported better masticatory and speech efficiency with removable dentures in maxillary and mandibular jaw and also self-esteem improvement and family interaction.

Treatment effects of quad-helix on the eruption pattern of maxillary second molars.

PubMed

Kobayashi, Yoshiki; Shundo, Isao; Endo, Toshiya

2012-07-01

To evaluate the effects of quad-helix treatment on the eruption pattern of maxillary second molars in patients with maxillary incisor crowding. The lateral cephalograms of 40 consecutively treated patients in the early mixed-dentition group (treatment group) were examined in comparison with those of the same number of untreated patients with a similar form of malocclusion (control group). The cephalograms of the treated patients were taken at the start (T0) and at the end (T1) of treatment, and those of the untreated patients were also taken at about the same time as T0 and T1. The mean ages at T0 and T1 in the two groups were about the same. Distal tipping and movement and impeded extrusion of the maxillary first molars were notable in the treatment group compared with the control group. The actual treatment changes with the use of the quad-helix found expression in distal tipping and impeded vertical eruption of maxillary second molars. The more the maxillary first molars were tipped distally and the less the maxillary first molars extruded, the more the vertical eruption of the maxillary second molars was impeded. Quad-helix treatment gives rise to spontaneous distal tipping and impeded vertical eruption of the maxillary second molars.

Resorption of maxillary incisors after orthodontic treatment--clinical study of risk factors.

PubMed

Elhaddaoui, Rajae; Benyahia, Hicham; Azeroual, Mohamed-Faouzi; Zaoui, Fatima; Razine, Rachid; Bahije, Loubna

2016-03-01

External apical root resorption (EARR) is one of the major problems associated with orthodontic treatment. Such lesions represent an iatrogenic risk that must be detected as early as possible, with regular radiological follow-up and appropriate therapeutic precautions. The causes and mechanisms leading to susceptibility to root resorption following the application of an orthodontic force are often not clear and are generally said to be of multifactorial origin. The aim of this clinical study was to analyze the factors linked to the occurrence of moderate to severe resorption (MSR) of upper incisors during orthodontic treatment in a group of Moroccan patients treated in the Dento-Facial Orthopedic Department of the Dental Consultation and Treatment Center (Centre de consultation et de traitements dentaires [CCTD]) in Rabat. A total of 82 patients (28% males, 72% females) aged between 12 and 27, with various malocclusions, who had been treated with fixed appliances for at least 1 year and for whom panoramic X-rays at the start, during and at the end of treatment were available, were selected randomly. The reduction in maxillary incisor root length was evaluated using resorption scores. The factors studied in relation to the risk of occurrence of MSR were: age, sex, treatment duration, extraction or non-extraction, type of malocclusion (Class I arch-length discrepancy, Class II, Class III), the vertical diagnosis (normal, supraocclusion, open bite), presence of dysfunction, impacted canines and root morphology. Statistical analysis was performed using SPSS software, version 18.0. Statistical tests used were: Kaplan-Meier analysis and the univariate and multivariate Cox models for the study of factors associated with MSR. The threshold of significance adopted was 0.05. The factors that were significantly associated with the occurrence of MSR at the level of the upper incisors were: tooth type, with a greater risk for the lateral incisor (HR=3.2 95% CI [2.3-4.5] P<0.001), treatments with extraction (HR=1.64 95% CI [1.16-2.33] P<0.05), the presence of supraocclusion (HR=2.17 95% CI [1.33-3.53] P<0.05) or open bite (HR=3.12 95% CI [1.66-5.86] P<0.001) and root malformation (HR=1.5 95% CI [1.09-2.07] P<0.05). Age, sex, type of malocclusion, dysfunction and impaction of canines were not associated at a statistically significant level with the risk of occurrence of MSR of the upper incisors. EARR is difficult to avoid; the orthodontist's role remains crucial in identifying risk factors so as to adopt a treatment strategy taking these factors into account. In our population, the risk of MSR in the upper incisors appeared to increase in treatments with extraction, situations of supraocclusion or open bite, and in the presence of root abnormalities. Finally, clinical recommendations for the prevention of the occurrence of MSR of the maxillary incisors are proposed, taking into account all the risk factors identified. Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.

Accuracy of maxillary positioning after standard and inverted orthognathic sequencing.

PubMed

Ritto, Fabio G; Ritto, Thiago G; Ribeiro, Danilo Passeado; Medeiros, Paulo José; de Moraes, Márcio

2014-05-01

This study aimed to compare the accuracy of maxillary positioning after bimaxillary orthognathic surgery, using 2 sequences. A total of 80 cephalograms (40 preoperative and 40 postoperative) from 40 patients were analyzed. Group 1 included radiographs of patients submitted to conventional sequence, whereas group 2 patients were submitted to inverted sequence. The final position of the maxillary central incisor was obtained after vertical and horizontal measurements of the tracings, and it was compared with what had been planned. The null hypothesis, which stated that there would be no difference between the groups, was tested. After applying the Welch t test for comparison of mean differences between maxillary desired and achieved position, considering a statistical significance of 5% and a 2-tailed test, the null hypothesis was not rejected (P > .05). Thus, there was no difference in the accuracy of maxillary positioning between groups. Conventional and inverted sequencing proved to be reliable in positioning the maxilla after LeFort I osteotomy in bimaxillary orthognathic surgeries. Copyright © 2014 Elsevier Inc. All rights reserved.

Revascularization for a necrotic immature permanent lateral incisor: a case report and literature review.

PubMed

Kottoor, Jojo; Velmurugan, Natanasabapathy

2013-07-01

Revascularization is a valuable treatment in immature necrotic teeth that allows the continuation of root development. This article describes the successful revascularization treatment of an immature maxillary lateral incisor that was initially diagnosed with apical periodontitis. The tooth was asymptomatic and functional clinically and radiographically during the follow-up period of 5 years. The follow-up showed evidence of progressive thickening of the dentinal walls, development of root length and apical closure. The article also discusses the currently available literature regarding revascularization of immature permanent teeth. © 2012 John Wiley & Sons Ltd, BSPD and IAPD.

Bilateral Complete and Incomplete Fusion of Incisors and its Management.

PubMed

Da Costa, Godwin Clovis; Chalakkal, Paul; De Souza, Neil; Gavhane, Sanket

2017-01-01

This case report highlights the management of a case of bilateral complete and incomplete fusion of maxillary incisors in a 10-year-old child. A mock-up was done on the diagnostic cast. Pretreatment esthetic evaluation was done using bis-acryl composite temporaries which were transferred intraorally from the diagnostic cast using a putty index. An incisal overlap veneer preparation was done, following which, an IPS e-max veneer was cemented. A digital mock-up was carried out using the Adobe Photoshop and Corel Draw softwares to aid in laboratorial fabrication of the veneer.

Esthetics built to last: treatment of functional anomalies may need to precede esthetic corrections.

PubMed

Bassett, Joyce L

2014-02-01

In this case of a 33 year-old male patient seeking a more esthetically pleasing smile, comprehensive restorative treatment planning included recognition of the patient's incisor position and morphology, dentofacial requirements, and appropriate vertical dimension. The accepted treatment plan consisted of orthodontic correction of the patient's anterior constriction, followed by placement of eight maxillary veneers and composite augmentation on the mandibular incisors and canines. Keys to achieving a successful outcome included knowledge of smile design, material selection, and preparation techniques. The case demonstrates how functional problems oftentimes must be addressed before esthetic correction can be made.

Unilateral and bilateral dental transpositions in the maxilla-dental and skeletal findings in 63 individuals.

PubMed

Danielsen, J C; Karimian, K; Ciarlantini, R; Melsen, B; Kjær, I

2015-12-01

This was to elucidate dental and skeletal findings in individuals with unilateral and bilateral maxillary dental transpositions. The sample comprised of radiographic materials from 63 individuals with maxillary dental transpositions from the Departments of Odontology at the Universities of Copenhagen and Aarhus and by the Danish municipal orthodontic service. The cases were divided into three groups: unilateral transposition of the canine and first premolar (Type 1U), bilateral transposition of canine and first premolar (Type 1B), and unilateral transposition of canine and lateral incisor (Type 2). The dentitions were analysed regarding agenesis and dental morphological anomalies on panoramic radiographs, and craniofacial aspects were cephalometrically analysed on profile images The results were statistically evaluated. All groups demonstrated increased occurrences of agenesis (Type 1U and Type 1B: 31 agenesis in 15 patients; and Type 2 three agenesis in three patients). Taurodontic root morphology was most dominant in Type 1U. Peg-shaped lateral incisors showed an increased occurrence, though not in Type 1U. Skeletally, Type 1B and Type 1U demonstrated maxillary retrognathia (more pronounced in Type 1B). Type 2 showed a significant posterior inclination of the maxilla. Transpositions of maxillary canines involve dental and skeletal deviations. Dental deviations were predominantly taurodontic root morphology and agenesis. Regarding skeletal deviations, bilateral transpositions of the canines and the first premolars are associated with skeletal changes. Unilateral transpositions are possibly a localised deviation with minor or no skeletal involvements. The results indicate a possible difference in the aetiologies of unilateral and bilateral transpositions.

A comparative study on the stress distribution around dental implants in three arch form models for replacing six implants using finite element analysis.

PubMed

Zarei, Maryam; Jahangirnezhad, Mahmoud; Yousefimanesh, Hojatollah; Robati, Maryam; Robati, Hossein

2018-01-01

Dental implant is a method to replacement of missing teeth. It is important for replacing the missed anterior teeth. In vitro method is a safe method for evaluation of stress distribution. Finite element analysis as an in vitro method evaluated stress distribution around replacement of six maxillary anterior teeth implants in three models of maxillary arch. In this in vitro study, using ABAQUS software (Simulia Corporation, Vélizy-Villacoublay, France), implant simulation was performed for reconstruction of six maxillary anterior teeth in three models. Two implants were placed on both sides of the canine tooth region (A model); two implants on both sides of the canine tooth region and another on one side of the central incisor region (B model); and two implants on both sides of the canine tooth region and two implants in the central incisor area (C model). All implants evaluated in three arch forms (tapered, ovoid, and square). Data were analyzed by finite analysis software. Von Mises stress by increasing of implant number was reduced. In a comparison of A model in each maxillary arch, the stress created in the cortical and cancellous bones in the square arch was less than ovoid and tapered arches. The stress created in implants and cortical and cancellous bones in C model was less than A and B models. The C model (four-implant) reduced the stress distribution in cortical and cancellous bones, but this pattern must be evaluated according to arch form and cost benefit of patients.

Treatment effects of the Forsus Fatigue Resistant Device used with miniscrew anchorage.

PubMed

Aslan, Belma I; Kucukkaraca, Ebru; Turkoz, Cagri; Dincer, Mufide

2014-01-01

To evaluate the dentofacial effects of the Forsus Fatigue Resistant Device (FRD) used with miniscrew anchorage (FRDMS) and compare them with those of conventional FRD and an untreated Class II control group. The sample consisted of 48 Class II subjects. Sixteen patients (13.68 ± 1.09 years of age) were treated with FRDMS, whereas 17 subjects (14.64 ± 1.56 years of age) were treated with only FRD. Also, a control sample of 15 untreated Class II subjects (14.13 ± 1.50 years of age) was constructed. Angular and linear measurements were made on 96 lateral cephalograms. Paired t, one-way analysis of variance, and Tukey tests were used for statistical analysis. Class I molar relationship and overjet correction were achieved in an average period of 6.5 ± 1.97 and 5.5 ± 1.80 months in the FRDMS and FRD groups, respectively. No skeletal effect was determined in both treatment groups. Greater overbite correction was found in the FRD group. Retrusion and extrusion of maxillary incisors, distalization of maxillary molars, and extrusion of mandibular molars were significant in both treatment groups. Labial tipping of mandibular incisors was significantly greater in the FRD group than in the FRDMS group. Overjet and molar correction was totally dentoalveolar. Unfavorable labial tipping of mandibular incisors was effectively minimized with the usage of miniscrews.

Treatment outcomes of Class II malocclusion cases treated with miniscrew-anchored Forsus Fatigue Resistant Device: A randomized controlled trial.

PubMed

Eissa, Osama; El-Shennawy, Mahmoud; Gaballah, Safaa; El-Meehy, Ghada; El Bialy, Tarek

2017-11-01

To evaluate the skeletal, dental, and soft tissue effects of the Forsus Fatigue Resistant Device (FRD) used with miniscrew anchorage and compare them with those of the conventional Forsus FRD. This study was carried out on 38 patients. These patients were randomly allocated into three groups. The 14 patients in group 1 (aged 12.76 ± 1.0 years) were treated with the FRD appliance. In group 2, the 15 patients (aged 12.52 ± 1.12 years) received treatment with FRD using miniscrew anchorage, and the 9 patients in group 3 (aged 12.82 ± 0.9 years) received no treatment as a control group. Linear and angular measurements were made on lateral cephalograms before and immediately after Forsus treatment. Data were analyzed statistically using paired t-, ANOVA, and Tukey tests. Class I molar relationship and overjet correction were achieved in both treatment groups. Although mandibular growth was statistically nonsignificant, there was a significant headgear effect on the maxilla. Mandibular incisor proclination, maxillary incisor retroclination, and distalization of maxillary molars were significant in both treatment groups. However, no significant differences were found between the treatment groups. Class II correction was mainly dentoalveolar in both treatment groups. Use of miniscrews with Forsus did not enhance mandibular forward growth nor prevent labial tipping of the mandibular incisors.

A posteriori registration and subtraction of periapical radiographs for the evaluation of external apical root resorption after orthodontic treatment.

PubMed

Kreich, Eliane Maria; Chibinski, Ana Cláudia; Coelho, Ulisses; Wambier, Letícia Stadler; Zedebski, Rosário de Arruda Moura; de Moraes, Mari Eli Leonelli; de Moraes, Luiz Cesar

2016-03-01

This study employed a posteriori registration and subtraction of radiographic images to quantify the apical root resorption in maxillary permanent central incisors after orthodontic treatment, and assessed whether the external apical root resorption (EARR) was related to a range of parameters involved in the treatment. A sample of 79 patients (mean age, 13.5±2.2 years) with no history of trauma or endodontic treatment of the maxillary permanent central incisors was selected. Periapical radiographs taken before and after orthodontic treatment were digitized and imported to the Regeemy software. Based on an analysis of the posttreatment radiographs, the length of the incisors was measured using Image J software. The mean EARR was described in pixels and relative root resorption (%). The patient's age and gender, tooth extraction, use of elastics, and treatment duration were evaluated to identify possible correlations with EARR. The mean EARR observed was 15.44±12.1 pixels (5.1% resorption). No differences in the mean EARR were observed according to patient characteristics (gender, age) or treatment parameters (use of elastics, treatment duration). The only parameter that influenced the mean EARR of a patient was the need for tooth extraction. A posteriori registration and subtraction of periapical radiographs was a suitable method to quantify EARR after orthodontic treatment, and the need for tooth extraction increased the extent of root resorption after orthodontic treatment.

Morphoregulation of teeth: modulating the number, size, shape and differentiation by tuning Bmp activity

PubMed Central

Plikus, Maksim V.; Zeichner-David, Maggie; Mayer, Julie-Ann; Reyna, Julia; Bringas, Pablo; Thewissen, J. G. M.; Snead, Malcolm L.; Chai, Yang; Chuong, Cheng-Ming

2015-01-01

SUMMARY During development and evolution, the morphology of ectodermal organs can be modulated so that an organism can adapt to different environments. We have proposed that morphoregulation can be achieved by simply tilting the balance of molecular activity. We test the principles by analyzing the effects of partial downregulation of Bmp signaling in oral and dental epithelia of the keratin 14-Noggin transgenic mouse. We observed a wide spectrum of tooth phenotypes. The dental formula changed from 1.0.0.3/1.0.0.3 to 1.0.0.2(1)/1.0.0.0. All mandibular and M3 maxillary molars were selectively lost because of the developmental block at the early bud stage. First and second maxillary molars were reduced in size, exhibited altered crown patterns, and failed to form multiple roots. In these mice, incisors were not transformed into molars. Histogenesis and differentiation of ameloblasts and odontoblasts in molars and incisors were abnormal. Lack of enamel caused misocclusion of incisors, leading to deformation and enlargement in size. Therefore, subtle differences in the level, distribution, and timing of signaling molecules can have major morphoregulatory consequences. Modulation of Bmp signaling exemplifies morphoregulation hypothesis: simple alteration of key signaling pathways can be used to transform a prototypical conical-shaped tooth into one with complex morphology. The involvement of related pathways and the implication of morphoregulation in tooth evolution are discussed. PMID:16174037

Upper lip changes and gingival exposure on smiling: vertical dimension analysis.

PubMed

Miron, Hagai; Calderon, Shlomo; Allon, Dror

2012-01-01

Our objectives were to evaluate and quantify upper lip soft-tissue changes in the vertical dimensions both at rest and at maximum smile, and to examine the correlation between upper labial vestibular attachment height and maxillary gingival exposure on smiling. Seventy-two volunteers (36 men, 36 women) aged 20 to 40 (mean, 30.49 years) were recruited for this study. For each subject, 9 measurements of upper lip position and maxillary incisor crown height at rest and in maximum smile were recorded. A statistically significant sexual dimorphism was apparent in most of the measured variables. Relaxed external upper lip length was 3.1 mm shorter in the women than in the men. The mean maxillary central incisor display at rest was 1.78 mm greater in the women than in the men. A high smile line was 2.5 times more prevalent in the women. The upper lip was shortened by 30% in subjects with a high smile line compared with 23% in subjects with a low smile line. The following findings were observed in subjects with a high smile pattern: (1) short upper lip length, (2) low smiling/resting upper lip length ratio, (3) inferior attachment of the upper labial vestibule, and (4) prominent upper lip vermilion. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Orthodontic treatment for oral rehabilitation after multiple maxillofacial bone fractures.

PubMed

Nakamura, Yoshiki; Ogino, Tomoko Kuroiwa; Hirashita, Ayao

2008-09-01

We present the orthodontic treatment of a patient with occlusal dysfunction after plastic surgery for multiple maxillofacial bone fractures caused by a traffic accident. The patient had mandibular deviation to the right because of inappropriate repositioning and fixation of the fractured bone and complete avulsion of both mandibular central incisors. The bilateral mandibular incisors, canines, and premolars were also suspected of partial avulsion or alveolar bone fracture. Several tests, including percussion and dental computed tomography, were performed on these teeth to rule out ankylosis and confirm tooth movement. Camouflage orthodontic treatment was carried out with expansion of the maxillary arch, alignment of both arches, and space closure between the mandibular lateral incisors to improve the occlusion. Good occlusion and interdigitation were obtained. Orthodontic treatment is useful for the rehabilitation of occlusal dysfunction caused by multiple maxillofacial bone fractures.

Early Orthodontic Tooth Movement into Regenerative Bony Defects: A Case Report.

PubMed

Tsai, Hui-Chen; Yao, Chung-Chen Jane; Wong, Man-Ying

Early orthodontic tooth movement following regenerative surgery is controversial. In this case, during protraction of the maxillary right first premolar to substitute for the long-term missing maxillary right canine, Bio-Oss and Bio-Gide were used for lateral ridge augmentation at the area of the maxillary right lateral incisor and to cover the denuded surface at the buccal side of the first premolar. Orthodontic tooth movement (OTM) commenced 2 weeks after regenerative surgery. After 8 months, new bone formation was observed on the root surface of the first premolar during implant surgery. A cone beam computed tomography scan taken 1.5 years postsurgery revealed good maintenance of regenerative bone at the same site. This satisfactory outcome of early OTM following regenerative surgery suggests biomechanical stimulation may not jeopardize the regenerative effect.

Maxillary growth after the use of protraction head gear in conjunction with presurgical orthopedics and gingivoperiosteoplasty for complete bilateral cleft lip and alveolus patients.

PubMed

Kobayashi, Shinji; Hirakawa, Takashi; Fukawa, Toshihiko; Maegawa, Jiro

2013-09-01

Maxillary development is often inadequate in bilateral cleft patients. The use of presurgical orthopedics (PSO) and gingivoperiosteoplasty (GPP) may promote bone formation at the alveolar cleft, but can also have detrimental effects on maxillary development. Our objective was to investigate the effect of PSO and GPP on maxillary development in bilateral cleft lip and alveolus (BCLA) patients. We had 3 complete BCLA patients who had received PSO. All patients underwent cheiloplasty and GPP simultaneously. At 4 years, maxillary protraction head gear was used as part of the protocol. They were evaluated by cephalometric analysis at 4 and 8 years of age, and by CT imaging at 5 years of age. At 4 years of age, patients with all BCLA had anterior crossbite of deciduous central incisors. As a result of maxillary protraction, jaw development at 8 years was good. Among all patients, only one showed bone formation at the alveolar cleft sufficient to avoid alveolar bone grafting (ABG). All patients presented anterior crossbite in the premaxillary region, but had good maxillary growth at 8 years old as a result of maxillary protraction. The combination of PSO and GPP can potentially eliminate the need for ABG and does not significantly retard maxillary development. PSO with GPP and protraction head gear may be an option, but long-term growth is not known.

Modified Nance palatal arch appliance for anterior tooth replacement.

PubMed

Sethi, Ntasha; Shanthraj, Srinivas L; Muraleedharan, Manju; Mallikarjuna, Rachappa

2013-06-07

The following case report presents a new and an innovative technique for the postextraction replacement of maxillary central incisors using the natural teeth as pontics. The novel appliance fabricated fully satisfied the demands of the adolescent patient for a fixed prosthetic, while fulfilling the aesthetic and functional requirements presented by the case.

Modified Nance palatal arch appliance for anterior tooth replacement

PubMed Central

Sethi, Ntasha; Shanthraj, Srinivas L; Muraleedharan, Manju; Mallikarjuna, Rachappa

2013-01-01

The following case report presents a new and an innovative technique for the postextraction replacement of maxillary central incisors using the natural teeth as pontics. The novel appliance fabricated fully satisfied the demands of the adolescent patient for a fixed prosthetic, while fulfilling the aesthetic and functional requirements presented by the case. PMID:23749860

The Immediate Aesthetic and Functional Restoration of Maxillary Incisors Compromised by Periodontitis Using Short Implants with Single Crown Restorations: A Minimally Invasive Approach and Five-Year Follow-Up

PubMed Central

Marincola, Mauro; Lombardo, Giorgio; Pighi, Jacopo; Corrocher, Giovanni; Mascellaro, Anna; Lehrberg, Jeffrey; Nocini, Pier Francesco

2015-01-01

The functional and aesthetic restoration of teeth compromised due to aggressive periodontitis presents numerous challenges for the clinician. Horizontal bone loss and soft tissue destruction resulting from periodontitis can impede implant placement and the regeneration of an aesthetically pleasing gingival smile line, often requiring bone augmentation and mucogingival surgery, respectively. Conservative approaches to the treatment of aggressive periodontitis (i.e., treatments that use minimally invasive tools and techniques) have been purported to yield positive outcomes. Here, we report on the treatment and five-year follow-up of patient suffering from aggressive periodontitis using a minimally invasive surgical technique and implant system. By using the methods described herein, we were able to achieve the immediate aesthetic and functional restoration of the maxillary incisors in a case that would otherwise require bone augmentation and extensive mucogingival surgery. This technique represents a conservative and efficacious alternative to the aesthetic and functional replacement of teeth compromised due to aggressive periodontitis. PMID:26649207

3D FEA of cemented glass fiber and cast posts with various dental cements in a maxillary central incisor.

PubMed

Madfa, Ahmed A; Al-Hamzi, Mohsen A; Al-Sanabani, Fadhel A; Al-Qudaimi, Nasr H; Yue, Xiao-Guang

2015-01-01

This study aimed to analyse and compare the stability of two dental posts cemented with four different luting agents by examining their shear stress transfer through the FEM. Eight three-dimensional finite element models of a maxillary central incisor restored with glass fiber and Ni-Cr alloy cast dental posts. Each dental post was luted with zinc phosphate, Panavia resin, super bond C&B resin and glass ionomer materials. Finite element models were constructed and oblique loading of 100 N was applied. The distribution of shear stress was investigated at posts and cement/dentine interfaces using ABAQUS/CAE software. The peak shear stress for glass fiber post models minimized approximately three to four times of those for Ni-Cr alloy cast post models. There was negligible difference in peak of shear stress when various cements were compared, irrespective of post materials. The shear stress had same trend for all cement materials. This study found that the glass fiber dental post reduced the shear stress concentration at interfacial of post and cement/dentine compared to Ni-Cr alloy cast dental post.

Orthodontic extrusion of Ellis Class VIII fracture of maxillary lateral incisor - The sling shot method.

PubMed

Felicita, A Sumathi

2018-07-01

The aim of this paper is to evaluate the efficacy of forced extrusion using the sling shot elastic. A 21 year adult patient reported with an Ellis Class VIII fracture of the maxillary right lateral incisor. Root canal treatment followed by a fiber reinforced composite post was placed and core build up was done. A metal button was bonded to the tooth. Begg brackets were placed from the second premolar on one side to the second premolar on the opposite side. 0.016″ × 0.025″ stainless steel was placed in ribbon mode. The ligature wire was placed as a sling shot from the button on the fractured tooth to the two adjacent teeth. 4 mm of extrusion was achieved and there was no evidence of root resorption. Forced extrusion was achieved in four months. The sling shot method is a very effective method of ligation. Light forces are delivered over a long duration with definitive results as compared to the inconsistent force delivery with conventional extrusion mechanics.

[Root resorption and orthodontic treatment].

PubMed

Sebbar, M; Bourzgui, F

2011-09-01

The aim of our study was to investigate the prevalence of root resorption during and at the end of orthodontic treatment and to assess its relationship with age, sex and treatment with or without extractions. Our study included 82 patients (51 women and 31 men) aged between 6 and 38 years, who received orthodontic treatment. Evaluation of root resorption was performed on panoramics at the beginning and at the end of orthodontic treatment. All the teeth were observed. The degree of root resorption was increased respectively by the standards in four ordinal levels (4). Data analysis was performed by Epi Info 6.0. Root resorption was present in all the teeth and maxillary incisors are the most affected. The correlation between age and root resorption was significant (p = 0.008). Women were more affected by resorption (P = 0.002). Patients treated with extraction showed more root resorption (p = 0.12). Our results suggest that orthodontic treatment is involved in the development of root resorption. The most often teeth resorbed are maxillary incisors. Age, sex and orthodontic extractions can be considered as risk factors for root resorption.

Association between Hair-Induced Oronasal Inflammation and Ulcerative Dermatitis in C57BL/6 Mice

PubMed Central

Duarte-Vogel, Sandra M; Lawson, Gregory W

2011-01-01

Ulcerative dermatitis (UD) is a genetically linked syndrome that affects the neck, torso, and facial regions of C57BL/6 mice and strains with C57BL/6 background. In this study, 96 mice with skin ulcerations in 3 different regions of the body and 40 control animals without ulcerated lesions were evaluated histologically for the presence of hair-induced inflammation in the oronasal cavity. We found that 73.5% (100 of 136) of the mice had hair-induced periodontitis, glossitis, or rhinitis regardless of the presence or absence of UD. Of those mice with UD, 93.9% had hair-induced oronasal inflammation. The mandibular incisors were the most commonly affected site (64.6%), followed by the maxillary molars (20.8%), maxillary incisors (16.7%), tongue (16.7%), nasal cavity (10.4%), and mandibular molars (7.3%). In addition, oronasal hair-induced inflammation occurred in 25% (10 of 40) of the control mice. Here we show a significant association between UD and hair-induced inflammatory lesions of the oronasal cavities. PMID:21819677

Surgical management of lateral incisor with type II dens invaginatus and a periapical pathosis: A case report with 1-year follow-up.

PubMed

Lakshmi, V Naga; Varma, K Madhu; Sajjan, Girija S; Rambabu, Tanikonda

2017-01-01

Dens invaginatus is a relatively common dental malformation resulting from an infolding of enamel organ into the dental papilla varying in depth into the tooth tissues. Complex morphological anatomy associated with the pulpal pathology presents inaccessibility to completely remove the necrotic pulp tissues and hence poses challenges in rendering endodontic treatment. A combination of nonsurgical and surgical management in treating such cases is advisable depending on the presented variations. The present case reports the surgical endodontic treatment of an immature maxillary lateral incisor with type II dens invaginatus and periapical pathology.

Surgical management of lateral incisor with type II dens invaginatus and a periapical pathosis: A case report with 1-year follow-up

PubMed Central

Lakshmi, V. Naga; Varma, K. Madhu; Sajjan, Girija S.; Rambabu, Tanikonda

2017-01-01

Dens invaginatus is a relatively common dental malformation resulting from an infolding of enamel organ into the dental papilla varying in depth into the tooth tissues. Complex morphological anatomy associated with the pulpal pathology presents inaccessibility to completely remove the necrotic pulp tissues and hence poses challenges in rendering endodontic treatment. A combination of nonsurgical and surgical management in treating such cases is advisable depending on the presented variations. The present case reports the surgical endodontic treatment of an immature maxillary lateral incisor with type II dens invaginatus and periapical pathology. PMID:28761255

The effects of fixed and removable face masks on maxillary deficiencies in growing patients.

PubMed

Jamilian, Abdolreza; Showkatbakhsh, Rahman; Taban, Tannaz

2012-01-01

To compare the effects of two different types of face masks in the treatment of Class III malocclusions with maxillary deficiency in growing patients. Forty-three patients (21 boys and 22 girls) with maxillary deficiencies were selected. Twenty-one patients (10 boys and 11 girls) with a mean age of 8.9 ± 1.4 years were treated with maxillary removable appliances and face masks. Twenty-two patients (10 boys and 12 girls) with a mean age of 9.3 ± 1.2 years were treated with maxillary fixed appliances and face masks. Lateral cephalograms obtained at the beginning and end of the study were analyzed. Paired t tests and Wilcoxon tests showed that SNA and ANB significantly increased in both groups. The Mann-Whitney test showed that there were no statistically significant differences between the two groups except for U1-SN, which increased by 6.2 ± 7.1 degrees in the removable face mask group and 11.1 ± 6.9 degrees in the fixed face mask group (P < .02). Both treatment modalities were successful in moving the maxilla forward. However, the maxillary incisors had more labial inclination in the fixed appliance group.

Long-term follow-up after maxillary distraction osteogenesis in growing children with cleft lip and palate.

PubMed

Huang, Chiung-Shing; Harikrishnan, Pandurangan; Liao, Yu-Fang; Ko, Ellen W C; Liou, Eric J W; Chen, Philip K T

2007-05-01

To evaluate the changes in maxillary position after maxillary distraction osteogenesis in six growing children with cleft lip and palate. Retrospective, longitudinal study on maxillary changes at A point, anterior nasal spine, posterior nasal spine, central incisor, and first molar. The University Hospital Craniofacial Center. Cephalometric radiographs were used to measure the maxillary position immediately after distraction, at 6 months, and more than 1 year after distraction. After maxillary distraction with a rigid external distraction device, the maxilla (A point) on average moved forward 9.7 mm and downward 3.5 mm immediately after distraction, moved backward 0.9 mm and upward 2.0 mm after 6 months postoperatively, and then moved further backward 2.3 mm and downward 6.8 mm after more than 1 year from the predistraction position. In most cases, maxilla moved forward at distraction and started to move backward until 1 year after distraction, but remained forward, as compared with predistraction position. Maxilla also moved downward during distraction and upward in 6 months, but started descending in 1 year. There also was no further forward growth of the maxilla after distraction in growing children with clefts.

Three-dimensional assessment of maxillary changes associated with bone anchored maxillary protraction

PubMed Central

Nguyen, Tung; Cevidanes, Lucia; Cornelis, Marie A.; Heymann, Gavin; de Paula, Leonardo K.; De Clerck, Hugo

2013-01-01

Introduction Bone-anchored maxillary protraction has been shown to be an effective treatment modality for the correction of Class III malocclusions. The purpose of this study was to evaluate 3-dimensional changes in the maxilla, the surrounding hard and soft tissues, and the circummaxillary sutures after bone-anchored maxillary protraction treatment. Methods Twenty-five consecutive skeletal Class III patients between the ages of 9 and 13 years (mean, 11.10 ± 1.1 years) were treated with Class III intermaxillary elastics and bilateral miniplates (2 in the infrazygomatic crests of the maxilla and 2 in the anterior mandible). Cone-beam computed tomographs were taken before initial loading and 1 year out. Three-dimensional models were generated from the tomographs, registered on the anterior cranial base, superimposed, and analyzed by using color maps. Results The maxilla showed a mean forward displacement of 3.7 mm, and the zygomas and the maxillary incisors came forward 3.7 and 4.3 mm, respectively. Conclusions This treatment approach produced significant orthopedic changes in the maxilla and the zygomas in growing Class III patients. PMID:22133943

Comparison of short-term effects between face mask and skeletal anchorage therapy with intermaxillary elastics in patients with maxillary retrognathia.

PubMed

Ağlarcı, Cahide; Esenlik, Elçin; Fındık, Yavuz

2016-06-01

The aim of this study was to compare the short-term dental and skeletal effects of a face mask (FM) with those of skeletal anchorage (SA) therapy with intermaxillary elastics in prepubertal patients with skeletal Class III malocclusion. Fifty patients with skeletal Class III malocclusion and maxillary deficiency were divided into two groups. In the FM group, an FM was applied by a bite plate with a force of 400g for each side. In the SA group, mini-plates were placed between mandibular lateral incisors and canines, and mini-implants were inserted between maxillary second premolars and first molars. A bite plate was inserted into the upper arch, and Class III elastics were applied with a force of 200g between each mini-plate and mini-implant. Mean treatment durations were 0.52±0.09 years for FM and 0.76±0.09 years for SA. After the treatment, statistically significant increases in SNA°, ANB°, A-y, 1-NA, SnGoGn°, Co-A, Co-Gn, and A-Nperp, and reductions in SNB° and FH┴N-Pg were observed in both groups, and these changes were similar in both groups. In the FM group, 1-NB decreased significantly, and in the SA group, it increased significantly (P < 0.05). The undesired dentoalveolar effects of the FM treatment were eliminated with SA treatment, except with regard to lower incisor inclination. Favourable skeletal outcomes can be achieved by SA therapies, which could be an alternative to the extraoral appliances frequently applied to treat skeletal Class III patients with maxillary deficiency. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Impact of digital prosthodontic planning on dental esthetics: Biometric analysis of esthetic parameters.

PubMed

Abduo, Jaafar; Bennamoun, Mohammed; Tennant, Marc; McGeachie, John

2016-01-01

Improving dental esthetics is a main objective of prosthodontic treatment. Recently, digital diagnostic waxing has been proposed as an alternative to conventional diagnostic waxing; however, the impact on esthetics has not been evaluated. The purpose of this study was to evaluate the impact of diagnostic waxing on biometric esthetic variables and to compare the esthetic outcome achieved by digital waxing with conventional waxing. Three biometric variables were evaluated: perceived frontal proportion (PFP), width/height (W:H) ratio, and symmetry. Maxillary casts of 13 patients were collected. All of them had maxillary anterior teeth that required prosthodontic treatment. Two forms of diagnostic waxing were executed: conventional and digital waxing. Measurements of the esthetic variables were conducted digitally. For the PFP, a frontal image was made and the width of each tooth was measured. Subsequently, the PFP values of the lateral incisor to central incisor and of the canine to central incisor were calculated. In addition, the height and width of each tooth was measured to calculate the W:H ratio. Using the previous measurements, the symmetry between the right and left sides was determined. No consistent or recurrent PFP was detected for any cast. The diagnostic waxing did not alter the PFP of the pretreatment casts. The diagnostic waxing had restored the W:H ratio to what is assumed to be a natural ratio. An improvement in symmetry was detected after the diagnostic waxing and was more prominent after the digital waxing. However, no significant difference was found between the 2 diagnostic waxing methods. The 2 diagnostic waxing methods influenced the esthetic variables of the anterior maxillary teeth and yielded similar outcomes. Digital waxing appears to be a reasonable alternative, but further investigations are needed to ensure its practicality. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

[Molar incisor hypomineralization (MIH)--a literature review].

PubMed

Gotler, M; Ratson, T

2010-04-01

MIH was defined by Weerheijm (2001) as "hypomineralisation of systemic origin of 1-4 permanent first molars, frequently associated with affected incisors". The prevalence of MIH varies between 2.8% and 25%, dependent upon the study. At their sixth congress in 2003, The European Association of pediatric dentistry defined criteria for diagnosis of the phenomena. It included the presence of demarcated opacity, posteruptive enamel breakdown, atypical restoration, extracted molar due to MIH and unerupted teeth. According to the teeth involved and to the time of the crown formation, researches focused on environmental and systemic conditions as possible reasons for MIH.The etiologies were divided into five groups: Exposure to environmental contaminants, pre/peri and neonatal problems, exposure to fluoride, common childhood illnesses and medically compromised children. The clinical implications include highly sensitive teeth, difficulty to achieve adequate anesthesia, behavioral problems and anxiety, rapid progression of caries and the esthetic implications. A six step approach to management was described suggested: risk identification, early diagnosis, remineralization and desensitization, prevention of caries and posteruption breakdown, restorations and extractions and finally maintenance. Restoring an affected molar can vary from adhesive intra coronal restorations (resin composite is the material of choice) to extra coronal restorations (e.g. preformed metal crown). Esthetic solutions to affected incisors may include microabrasion (that shows little improvement) and resin composite or porcelain veneer. The key for a successful treatment is early diagnosis, intense follow up and usage of remineralizating agents as soon as the teeth erupt. There is still need for further research to clarify the etiological factors and improve the durability of restoration in affected teeth.

Distal movement of maxillary molars in nongrowing patients with the skeletal anchorage system.

PubMed

Sugawara, Junji; Kanzaki, Reiko; Takahashi, Ichiro; Nagasaka, Hiroshi; Nanda, Ravindra

2006-06-01

It is now possible to predictably move maxillary molars distally in nongrowing patients with the skeletal anchorage system (SAS) and to improve malocclusions without having to extract the premolars and regardless of the patient's compliance. The purposes of this study were to investigate the amount of distal movement of the maxillary first molars, the type of movement, the difference between actual and predicted amounts of distalization, and the relationship between the amount of distalization and age. Twenty-five nongrowing patients (22 female, 3 male) successfully treated with the SAS were the subjects in this study. The amount and the type of distalization, the difference between predicted and resulting amounts of distalization, and the relationship between the patient's age and the amount of distalization were analyzed with wide-opening cephalometric radiographs. The average amount of distalization of the maxillary first molars was 3.78 mm at the crown level and 3.20 mm at the root level. The amount of distalization at the crown level was significantly correlated with the average value of treatment goals (3.60 mm). The maxillary molars were predictably distalized in accordance with the individualized treatment goals without regard to patient age and extraction of the third or second molars. The SAS is a viable noncompliance modality to move maxillary molars for distally correcting maxillary protrusions and malocclusions characterized by maxillary incisor crowding.

Direct restoration modalities of fractured central maxillary incisors: A multi-levels validated finite elements analysis with in vivo strain measurements.

PubMed

Davide, Apicella; Raffaella, Aversa; Marco, Tatullo; Michele, Simeone; Syed, Jamaluddin; Massimo, Marrelli; Marco, Ferrari; Antonio, Apicella

2015-12-01

To quantify the influence of fracture geometry and restorative materials rigidity on the stress intensity and distribution of restored fractured central maxillary incisors (CMI) with particular investigation of the adhesive interfaces. Ancillary objectives are to present an innovative technology to measure the in vivo strain state of sound maxillary incisors and to present the collected data. A validation experimental biomechanics approach has been associated to finite element analysis. FEA models consisted of CMI, periodontal ligament and the corresponding alveolar bone process. Three models were created representing different orientation of the fracture planes. Three different angulations of the fracture plane in buccal-palatal direction were modeled: the fracture plane perpendicular to the long axis in the buccal-palatal direction (0°); the fracture plane inclined bucco-palatally in apical-coronal direction (-30°); the fracture plane inclined palatal-buccally in apical-coronal direction (+30°). First set of computing runs was performed for in vivo FE-model validation purposes. In the second part, a 50N force was applied on the buccal aspect of the CMI models. Ten patients were selected and subjected to the strain measurement of CMI under controlled loading conditions. The main differences were noticed in the middle and incisal thirds of incisors crowns, due to the presence of the incisal portion restoration. The stress intensity in -30° models is increased in the enamel structure close to the restoration, due to a thinning of the remaining natural tissues. The rigidity of the restoring material slightly reduces such phenomenon. -30° model exhibits the higher interfacial stress in the adhesive layer with respect to +30° and 0° models. The lower stress intensity was noticed in the 0° models, restoration material rigidity did not influenced the interfacial stress state in 0° models. On the contrary, material rigidity influenced the interfacial stress state in +30° and -30° models, higher rigidity restoring materials exhibits lower interfacial stress with respect to low rigidity materials. Fracture planes inclined palatal-buccally in apical-coronal direction (+30°) reduce the interfacial stress intensity and natural tissues stress intensity with respect to the other tested configurations. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Flare up rate related to root canal treatment of asymptomatic pulpally necrotic central incisor teeth in patients attending a military hospital.

PubMed

Al-Negrish, Abdul Rohman Salem; Habahbeh, Riyad

2006-10-01

This prospective study was conducted to determine the flare up rate related to root canal treatment of asymptomatic non vital maxillary central incisor teeth performed in one and two appointments and the relationship, if any between pain and number of treatment visits. The frequency of postobturation pain and swelling was recorded and evaluated over an observation period of 1 week in a 120 consecutive patients undergoing root canal treatment. The patients were assigned randomly into one of two groups of 60 patients each. The canals of all teeth were prepared and filled using the step-back preparation and lateral condensation filling techniques. The data were analyzed statistically using Mann-Whitney test. Eight of the 120 patients were excluded from the analysis as they failed to attend for postoperative reviews. Out of the 112 patients involved in the study 90 patients had no pain, 9 patients had slight pain, 8 patients had moderate pain, and 5 patients had severe pain after 2 days. After 7 days 104 patients had no pain, 4 patients had slight pain, 3 patients had moderate pain and 1 patient had severe pain. No statistically significant difference in the incidence and degree of postoperative pain was found between one and two visit Endodontic procedures. The rate of post obturation flare up in asymptomatic Endodontically treated non vital maxillary centarl incisors was 11.6 and 3.6% after 2 and 7 days, respectively.

Orthodontic decompensation in skeletal Class III malocclusion: redefining the amount of movement assessed by Cone-Beam Computed Tomography

PubMed Central

Cappellozza, José Antonio Zuega; Guedes, Fabio Pinto; Nary, Hugo; Capelozza, Leopoldino; Cardoso, Mauricio de Almeida

2015-01-01

Introduction: Cone-Beam Computed Tomography (CBCT) is essential for tridimensional planning of orthognathic surgery, as it allows visualization and evaluation of bone structures and mineralized tissues. Tomographic slices allow evaluation of tooth inclination and individualization of movement performed during preoperative decompensation. The aim of this paper was to assess maxillary and mandibular incisors inclination pre and post orthodontic decompensation in skeletal Class III malocclusion. Methods: The study was conducted on six individuals with skeletal Class III malocclusion, surgically treated, who had Cone-Beam Computed Tomographic scans obtained before and after orthodontic decompensation. On multiplanar reconstruction view, tomographic slices (axial, coronal and sagittal) were obtained on the long axis of each incisor. The sagittal slice was used for measurement taking, whereas the references used to assess tooth inclination were the long axis of maxillary teeth in relation to the palatal plane and the long axis of mandibular teeth in relation to the mandibular plane. Results: There was significant variation in the inclination of incisors before and after orthodontic decompensation. This change was of greater magnitude in the mandibular arch, evidencing that natural compensation is more effective in this arch, thereby requiring more intensive decompensation. Conclusion: When routinely performed, the protocols of decompensation treatment in surgical individuals often result in intensive movements, which should be reevaluated, since the extent of movement predisposes to reduction in bone attachment levels and root length. PMID:26560818

Implant site development by orthodontic forced eruption of nontreatable teeth: a case report.

PubMed

Rokn, Amir Reza; Saffarpour, Anna; Sadrimanesh, Rouzbeh; Iranparvar, Kaveh; Saffarpour, Aida; Mahmoudzadeh, Majid; Soolari, Ahmad

2012-01-01

Loss of bone and soft tissue attachment are common sequelae of periodontitis that may jeopardize the aesthetic outcome and compromise the functional and aesthetic outcomes of treatment. The following case report describes one of the most predictable techniques of vertical ridge augmentation, which is orthodontic extrusion or forced eruption of hopeless teeth. A 34-year-old woman who presented with severe attachment loss and deep pockets was diagnosed with generalized aggressive periodontitis. The mobile maxillary incisors were consequently extracted and were replaced with dental implants. However, prior to extraction, orthodontic extrusion of the hopeless incisors was performed to correct vertical ridge defects. Following extrusion and extraction of the maxillary incisors, to prevent soft tissue collapse and to preserve the papillae during socket healing, the crowns of the extracted teeth were used as pontics on a removable partial provisional denture. After 8 weeks, the implants were placed, and an immediate functional restoration was delivered. After 4 months of healing, a fixed definitive partial prosthesis was fabricated and delivered. After periodontal treatment, over a 2-year period, the progression of aggressive periodontitis was controlled. The mean vertical movement of marginal bone was 3.6 mm. The use of the crowns of extracted teeth appears to be an effective method to maintain papillae. Orthodontic extrusion is a predictable method for the correction of vertical ridge defects. Orthodontic treatment does not aggravate or hasten the progression of aggressive periodontitis.

A posteriori registration and subtraction of periapical radiographs for the evaluation of external apical root resorption after orthodontic treatment

PubMed Central

Chibinski, Ana Cláudia; Coelho, Ulisses; Wambier, Letícia Stadler; Zedebski, Rosário de Arruda Moura; de Moraes, Mari Eli Leonelli; de Moraes, Luiz Cesar

2016-01-01

Purpose This study employed a posteriori registration and subtraction of radiographic images to quantify the apical root resorption in maxillary permanent central incisors after orthodontic treatment, and assessed whether the external apical root resorption (EARR) was related to a range of parameters involved in the treatment. Materials and Methods A sample of 79 patients (mean age, 13.5±2.2 years) with no history of trauma or endodontic treatment of the maxillary permanent central incisors was selected. Periapical radiographs taken before and after orthodontic treatment were digitized and imported to the Regeemy software. Based on an analysis of the posttreatment radiographs, the length of the incisors was measured using Image J software. The mean EARR was described in pixels and relative root resorption (%). The patient's age and gender, tooth extraction, use of elastics, and treatment duration were evaluated to identify possible correlations with EARR. Results The mean EARR observed was 15.44±12.1 pixels (5.1% resorption). No differences in the mean EARR were observed according to patient characteristics (gender, age) or treatment parameters (use of elastics, treatment duration). The only parameter that influenced the mean EARR of a patient was the need for tooth extraction. Conclusion A posteriori registration and subtraction of periapical radiographs was a suitable method to quantify EARR after orthodontic treatment, and the need for tooth extraction increased the extent of root resorption after orthodontic treatment. PMID:27051635

[The effect of cervical headgear and lower utility arch on the control of vertical dimension in tooth and jaw].

PubMed

Zhang, Li; Luo, Ying; Wang, Ren-fei

2010-08-01

To evaluate the effect of cervical headgear and lower utility arch in growing skeletal Class II division 1 patients. The patients were divided into 3 groups, the first group was treated with cervical headgear alone (n=20), the second group was treated with cervical headgear and lower utility arch (n=20), and the third group was a control group without treatment (n=20). Cephalometric radiographs were taken and analyzed with SPSS15.0 software package. Student's t test was used to determine if there was significant difference among the 3 groups. Anterior facial height and ramus height displayed significantly increase in the treatment groups than those in the control group; the lower utility arch produced intrusion and lingual tipping of the mandibular incisors and distal tipping without extrusion of the mandibular molars; compared with the control group, maxillary molar total extrusion produced by cervical headgear treatment was not more than 1mm at average. The treatment groups show significant reduction in maxillary protrusion; significant increase in the anterior descent of the PP and ramus height, as a result, mandibular plane orientation is relatively unchanged. The treatment groups have maxillary molar extrusion less than 1mm, which can be considered clinically not significant. The lower utility arch produces mandibular incisor intrusion and lingual tipping, the mandibular molars tip distally without extrusion, the lower utility arch does not influence the mandibular rotation.

Comparative gene expression supports the origin of the incisor and molar process from a single endite in the mandible of the red flour beetle Tribolium castaneum

PubMed Central

2013-01-01

Background The biting edge of the primitive arthropod mandible consists of a biting incisor process and a crushing molar process. These structures are thought to be derived from a structure known as an endite but the precise details of this are not understood. Various hypotheses concerning the number of endites present in the arthropod mandible have been proposed. In the developing embryo, the mandible has an inner and outer lobe that are likely to develop into the incisor and molar processes of the larval mandible; these two lobes are commonly held to be derived from separate endites and to be serially homologous to the galea and lacinia endites of the maxillary appendage respectively (Machida). Results We undertook a study of the development of the embryonic mandible of the beetle Tribolium castaneum using the expression of developmental genes as markers of the developing endites in the mandible and maxilla. The Tribolium ortholog of paired (Tc-prd) has expression domains in the developing maxillary and labial endites as well as the inner and outer lobes of the mandible. Following the expression of Tc-prd in the developing mandible through to late stage embryos shows that the molar and incisor process develop from the inner and outer lobes respectively. In addition to Tc-prd, we compared the expression of genes in the endites of the maxilla to the mandible to draw conclusions about the number of endites in the mandible. Homologs of dachshund are typically expressed in the endites of mandibulate gnathal appendages. Comparison of the expression of Tc-prd, Tribolium dachshund (Tc-dac) and Tribolium wingless (Tc-wg) between the endites of the maxilla and the mandible suggest that, while there are two endites in the maxilla only a single endite is present in the mandible. Conclusions Comparative gene expression suggests that the Tribolium mandible has a single endite from which both mandible lobes are derived. Our results do not support Machida’s hypothesis homologising the incisor and molar processes of the mandible to the galea and lacinia endites of the maxilla. We propose, instead, that both incisor and molar processes are derived from a single endite serially homologous to the lacinia of the maxilla. PMID:23280103

Dentoskeletal features in individuals with ectopic eruption of the permanent maxillary first molar

PubMed Central

Rozzi, Matteo; Cardoni, Giulia; Ricchiuti, Maria Rosaria; Cozza, Paola

2015-01-01

Objective The aim of the study was to analyze the prevalence and distribution of ectopic eruption of the permanent maxillary first molar (EEM) in individuals scheduled for orthodontic treatment and to investigate the association of EEM with dental characteristics, maxillary skeletal features, crowding, and other dental anomalies. Methods A total of 1,317 individuals were included and randomly divided into two groups. The first 265 subjects were included as controls, while the remaining 1,052 subjects included the sample from which the final experimental EEM group was derived. The mesiodistal (M-D) crown width of the deciduous maxillary second molar and permanent maxillary first molar, maxillary arch length (A-PML), maxillomandibular transverse skeletal relationships (anterior and posterior transverse interarch discrepancies, ATID and PTID), maxillary and mandibular tooth crowding, and the presence of dental anomalies were recorded for each subject, and the statistical significance of differences in these parameters between the EEM and control groups was determined using independent sample t-tests. Chi-square tests were used to compare the prevalence of other dental anomalies between the two groups. Results The prevalence of maxillary EEM was 2.5%. The M-D crown widths, ATID and PTID, and tooth crowding were significantly greater, while A-PML was significantly smaller, in the EEM group than in the control group. Only two subjects showed an association between EEM and maxillary lateral incisor anomalies, which included agenesis in one and microdontia in the other. Conclusions EEM may be a risk factor for maxillary arch constriction and severe tooth crowding. PMID:26258065

Midpalatal miniscrews and high-pull headgear for anteroposterior and vertical anchorage control: cephalometric comparisons of treatment changes.

PubMed

Lee, Jungkil; Miyazawa, Ken; Tabuchi, Masako; Kawaguchi, Misuzu; Shibata, Momoko; Goto, Shigemi

2013-08-01

Our aim was to evaluate which anchorage system is better suited for both anteroposterior and vertical anchorage control of maxillary posterior teeth. Fifty-one subjects requiring maximum anchorage were divided into 2 groups according to maxillary posterior anchorage reinforcement: high-pull headgear, conventional transpalatal arch, and interarch elastics (n = 28); or modified transpalatal arch supported by 2 midpalatal miniscrews (n = 23). Bilateral maxillary first premolars were extracted in all patients. Pretreatment and posttreatment lateral cephalometric radiographs were superimposed to compare skeletal and dental changes between the groups. (1) The miniscrew group had less mesial movement of the maxillary first molars (0.85 vs 3.63 mm) and greater maxillary incisor retraction (6.87 vs 4.50 mm) than did the headgear group with the same treatment duration. (2) The maxillary molars were significantly intruded in the miniscrew group (1.30 mm), whereas they were extruded in the headgear group (0.71 mm). In the miniscrew group, intrusion of the maxillary molars resulted in a statistically significant decrease in the mandibular plane angle (0.80°). Patients using high-pull headgear showed no significant decrease in these measurements. In both the anteroposterior and vertical directions, a modified transpalatal arch supported by 2 midpalatal miniscrews provided more stable anchorage. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Coexistence of true talon cusp and double dens invaginatus in a single tooth: a rare case report and review of the literature.

PubMed

Nu Nu Lwin, Hnin; Phyo Kyaw, Pyae; Wai Yan Myint Thu, Sai

2017-12-01

Co-occurrence of a talon cusp and double dens invaginatus is an extremely rare developmental dental anomaly. This case report represents a talon cusp with two dens invaginatus on a maxillary right lateral incisor. Early identification is needed for prevention of potential problems on the affected or opposing tooth.

Evaluation of the Immediate Dentofacial Changes in Late Adolescent Patients Treated with the Forsus™ FRD

PubMed Central

Gunay, Esen Ali; Arun, Tulin; Nalbantgil, Didem

2011-01-01

Objectives: The purpose of this study was to evaluate the short-term dentoalveolar and soft tissue changes in late adolescent patients treated with the Forsus™ FRD. Methods: A prospective study was carried out on 54 lateral cephalometric radiograms that were taken before placement and after removal of the appliance in the treatment group (15 subjects) and at the beginning and six months after in the control group (12 subjects). The patient selection criteria were as follows: skeletal and dental Class II malocclusion due to retrognatic mandible, normal or low-angle growth pattern, post-peak growth period, no extracted or congenitally missing permanent teeth, and minimum crowding in the lower dental arch. Results: The statistical assesment of the data suggested the following results: No sagital and vertical skeletal changes were induced. The mandibular incisors were protruded and intruded, while the maxillary incisors were retruded and extruded. The occlusal plane was rotated in clockwise direction as a result of these dentoalveolar changes. Overbite and overjet were reduced in all patients. Soft tissue profile slightly improved. Conclusions: The results revealed that, in late-adolescent patients Forsus™ FRD corrected Class II discrepancies through maxillary and mandibular dentoalveolar changes. PMID:22589581

Evaluation of the Immediate Dentofacial Changes in Late Adolescent Patients Treated with the Forsus(™) FRD.

PubMed

Gunay, Esen Ali; Arun, Tulin; Nalbantgil, Didem

2011-10-01

The purpose of this study was to evaluate the short-term dentoalveolar and soft tissue changes in late adolescent patients treated with the Forsus™ FRD. A prospective study was carried out on 54 lateral cephalometric radiograms that were taken before placement and after removal of the appliance in the treatment group (15 subjects) and at the beginning and six months after in the control group (12 subjects). The patient selection criteria were as follows: skeletal and dental Class II malocclusion due to retrognatic mandible, normal or low-angle growth pattern, post-peak growth period, no extracted or congenitally missing permanent teeth, and minimum crowding in the lower dental arch. THE STATISTICAL ASSESMENT OF THE DATA SUGGESTED THE FOLLOWING RESULTS: No sagital and vertical skeletal changes were induced. The mandibular incisors were protruded and intruded, while the maxillary incisors were retruded and extruded. The occlusal plane was rotated in clockwise direction as a result of these dentoalveolar changes. Overbite and overjet were reduced in all patients. Soft tissue profile slightly improved. The results revealed that, in late-adolescent patients Forsus™ FRD corrected Class II discrepancies through maxillary and mandibular dentoalveolar changes.

Upper airway changes after Xbow appliance therapy evaluated with cone beam computed tomography.

PubMed

Erbas, Banu; Kocadereli, Ilken

2014-07-01

To determine the treatment effects of the Xbow appliance on the upper airway dimensions and volume using cone-beam computed tomography (CBCT); to evaluate the cephalometric changes in the skeletal and dental structures of the skeletal Class II patients. The sample consisted of 25 Class II patients (11 male, 14 female) with a mean age of 11.1 ± 1.1 years. CBCT images were obtained at the beginning of the treatment (T0) and after the debonding of the Xbow (T1). Changes in superior, middle, and inferior parts of the oropharynx in the retroglossal region and changes in the oropharyngeal airway volume were statistically significant (P < .05, P < .01). The differences favoring the Xbow for the changes in the direction of Class II correction included SNA, SNB, ANB, maxillary depth angles, and point A-NPg and Co-B distances. Data of the dental parameters showed palatal tipping and extrusion of the maxillary incisors, labial tipping of the mandibular incisors, and mesial movement and extrusion of the mandibular molars. Treatment with the Xbow appliance in Class II patients resulted in favorable increase in the oropharyngeal airway dimensions and volume. Further studies with larger study samples and with control groups are needed.

The accuracy of image-guided navigation for maxillary positioning in bimaxillary surgery.

PubMed

Sun, Yi; Luebbers, Heinz-Theo; Agbaje, Jimoh Olubanwo; Lambrichts, Ivo; Politis, Constantinus

2014-05-01

The aim of our study was to evaluate the accuracy of image-guided maxillary positioning in sagittal, vertical, and mediolateral direction. Between May 2011 and July 2012, 17 patients (11 males, 6 females) underwent bimaxillary surgery with the use of intraoperative surgical navigation. During Le Fort I osteotomy, the Kolibri navigation system was used to measure movement of the maxilla at the edge of the upper central upper incisor in sagittal (buccal surface), vertical (incisor edge), and mediolateral (dental midline) direction. Six weeks after surgery, a postoperative CBCT scan was taken and registered to the preoperative cone-beam computed tomography scan to identify the actual surgical movement of the maxilla. Student 2-tailed paired t test was used to evaluate differences between the measured result from navigation system and actual surgical movement of the maxilla, which were 0.44 ± 0.35 mm (P = 0.82) in the sagittal, 0.50 ± 0.35 mm (P = 0.85) in the vertical, and 0.56 ± 0.36 mm (P = 0.81) in the mediolateral direction. Our finding demonstrates that intraoperative computer navigation is a promising tool for measuring the surgical change of the maxilla in bimaxillary surgery.

Long-term results of surgically-assisted maxillary protraction.

PubMed

Nevzatoğlu, Sirin; Küçükkeleş, Nazan

2014-05-01

The long-term treatment results of surgically-assisted facemask therapy were assessed by a comparison of the immediate protraction effects with those seen at five years review. Nine patients treated with a corticotomy-assisted maxillary protraction protocol were recalled five years following protraction. Cephalometric films taken before treatment (T0), immediately after maxillary protraction (T1) and five years after treatment (T2) were compared. The short-term results of surgically-assisted facemask therapy showed significant skeletal and soft tissue changes. After five years, the profile and dental relationships were well maintained and a cephalometric analysis revealed a stable vertical increase but only partially maintained soft tissue changes with loss of sagittal advancement. There was significant upper incisor proclination providing dental camouflage. Patients who are treated with corticotomy-assisted maxillary advancement should be very carefully selected. Assessment criteria include a low mandibular plane angle Class III patients who have severe maxillary retrognathism unable to be treated by conventional orthopaedic correction alone; patients who have almost completed growth and missed the chance of earlier orthopaedic correction, as well as patients who are not willing to accept bimaxillary orthognathic surgery, may be successfully treated.

Maxillary and Mandibular First Premolars Showing Three-Cusp Pattern: An Unusual Presentation

PubMed Central

Kotrashetti, Vijayalakshmi; Nayak, Aarati; Patil, Viraj; Kulkarni, Mayuri; Somannavar, Pradeep

2013-01-01

Dental anatomy is the study of morphology of various teeth in human dentitions. The application of dental anatomy in clinical practice is important, and dentist should have a thorough knowledge regarding the morphology of the teeth. At times as a result of genetic variation, environmental factors, diet of an individual and race, variations in the morphology of the teeth can be observed. These variations have been extensively studied by the researcher in the field of anthropology to define a particular race. The most commonly observed changes include peg-shaped laterals, shovel-shaped incisors, and extra cusp on molar. Common variations documented with regard to maxillary and mandibular first premolars are the variation in the number of roots. But the variations with respect to crown morphology are few. We report a first documented unusual presentation of maxillary and mandibular first premolars with three-cusps pattern in a female patient. PMID:23476817

Efficiency of molar distalization associated with second and third molar eruption stage.

PubMed

Flores-Mir, Carlos; McGrath, Lisa; Heo, Giseon; Major, Paul W

2013-07-01

To evaluate the efficiency of molar distalization associated with the second and third molar eruption stage. A systematic computerized database search was conducted using several databases. Adaptations of the terms molar distalization and distalizing appliances were used. The reference lists of all the selected articles were also searched for any potential articles that might have been missed in the electronic search. The data provided in the selected publications were grouped and analyzed in terms of molar distalization with respect to various eruption stages of maxillary second and third molars. Out of the 13 initially identified articles only four fulfilled the final selection criteria. Three of the four studies showed no statistical significance in linear molar distalization based on the eruptive stage of the second and/or third molars, while one study found that the amount of distal movement of the first molars was significantly greater in the group with unerupted second molars. Only one study found that the amount of molar tipping that occurred as a result of distalization was related to the eruption stage of the maxillary molars. Similarly, three of the four studies found that molar distalization time was not significantly affected by eruption of the second or third molars. The effect of maxillary second and third molar eruption stage on molar distalization-both linear and angular distalization-appears to be minimal. This conclusion is only based on low-level of evidence clinical trials. The large variability in the outcomes should be considered clinically.

A retrospective study on traumatic dental and soft-tissue injuries in preschool children in Zagreb, Croatia.

PubMed

Vuletić, Marko; Škaričić, Josip; Batinjan, Goran; Trampuš, Zdenko; Čuković Bagić, Ivana; Jurić, Hrvoje

2014-02-01

The purpose of this study was to analyze data according to gender, age, cause, number of traumatized teeth, time elapsed before treatment and type of tooth from the records of traumatized children. A retrospective study was conducted in the Department of Paediatric Dentistry at the University Dental Clinic in Zagreb, Croatia using the documentation of 128 patients (61 males and 67 females) aged 1 month to 6 years with injuries of primary teeth between February 2009 and January 2013. Trauma was seen in 217 primary teeth, which implies that the number of injured primary teeth was 1.69 per child. The maxillary central incisors were the most frequently affected teeth (81.1%), they were followed by maxillary lateral incisors, while the least affected were mandibular central incisors. Traumatic dental injuries involved periodontal tissue 2.82 times more frequently than hard dental and pulp tissue. The main cause of teeth injury was fall (67.2%) and the majority of injuries occurred at home (51.6%) (p<0.05). Of 128 patients who received treatment 71 (55.5%) also had soft-tissue injuries. The distribution of soft-tissue injuries by gender (35 males, 36 females) was not statistically significant. Comparing children with soft-tissue injuries and those without them, a statistically significant difference was found in the time of arrival (p<0.01). The results of this study showed the need of informing about preventive measures against falls at home and the methods of providing first aid in dental trauma injuries.

A retrospective study on traumatic dental and soft-tissue injuries in preschool children in Zagreb, Croatia

PubMed Central

Vuletić, Marko; Škaričić, Josip; Batinjan, Goran; Trampuš, Zdenko; Bagić, Ivana Čuković; Jurić, Hrvoje

2014-01-01

The purpose of this study was to analyze data according to gender, age, cause, number of traumatized teeth, time elapsed before treatment and type of tooth from the records of traumatized children. A retrospective study was conducted in the Department of Paediatric Dentistry at the University Dental Clinic in Zagreb. Croatia using the documentation of 128 patients (61 males and 67 females) aged 1 month to 6 years with injuries of primary teeth between February 2009 and January 2013. Trauma was seen in 217 primary teeth, which implies that the number of injured primary teeth was 1.69 per child. The maxillary central incisors were the most frequently affected teeth (81.1%), they were followed by maxillary lateral incisors, while the least affected were mandibular central incisors. Traumatic dental injuries involved periodontal tissue 2.82 times more frequently than hard dental and pulp tissue. The main cause of teeth injury was fall (67.2%) and the majority of injuries occurred at home (51.6%) (p<0.05). Of 128 patients who received treatment 71 (55.5%) also had soft-tissue injuries. The distribution of soft-tissue injuries by gender (35 males, 36 females) was not statistically significant. Comparing children with soft-tissue injuries and those without them, a statistically significant difference was found in the time of arrival (p<0.01). The results of this study showed the need of informing about preventive measures against falls at home and the methods of providing first aid in dental trauma injuries. PMID:24579964

[Effect of soft tissue thickness of upper lip on lip retraction in orthodontical-treated Class II, Division 1 females].

PubMed

Zou, Lanyi; Chen, Yunjia; Liu, Henglang; Na, Bi; He, Jinlong; Fan, Xiaoping

2016-04-01

To establish the Chinese Han national criteria for the thickness of upper lip in Chongqing and to investigate the effect of lip thickness on lip retraction in orthodontic treatment.
 A total of 240 adult patients (male=120, female=120) of Chinese Han nationality aged 18-35 years in Chongqing were treated with cephalograms and measured the thickness of upper lip. We established the Chinese Han national criteria for the thickness of upper lip in Chongqing according to the results. Sixty-eight female patients with Angle II 1 from Department of Orthodontics Stomatological Hospital of Chongqing Medical University were treated with maxillary premolars extraction, and pre- and post-treated with lateral cephalograms, then divided into 3 groups according to our criteria: a thin lips group, a normal lips group and a thick lips group. The ratio of the incisors retraction and the upper lip retraction were measured and calculated. The correlation between incisors retraction and the upper lip retraction was analyzed by the Pearson correlation method.
 There was statistical significance in the thickness of upper lip between males and females (P<0.01). The ratio of maxillary inscior retraction to the upper lip soft tissue retraction was 1.6:1, 2.2:1 and 2.9:1 in the thin lips group, the normal lips group and the thick lips group, respectively.
 Gender differences exist in the thickness of upper lip. Upper lip retraction with the incisors was negatively correlated with the soft tissue thickness of the upper lip in females with Angle II 1.

Investigation of tooth transposition in a non-syndromic Turkish anatolian population: characteristic features and associated dental anomalies.

PubMed

Celikoglu, Mevlut; Miloglu, Ozkan; Oztek, Ozkan

2010-09-01

The aims of this study were to investigate the frequency and characteristics of dental transpositions and to evaluate associated dental anomalies in a large sample of Turkish Anatolian population. A retrospective study was performed using panoramic radiographs of 6983 patients (4092 females and 2891 males) ranging in age from 12 to 27 subjected to Faculty of Dentistry at the University of Ataturk (Erzurum, Turkey) between 2005 and 2008. For each patient with tooth transposition we recorded the demographic variables (including age, sex), history of trauma, type, classification, and location of tooth transpositions, and associated dental anomalies. The Pearson chi-squared test was used to determine potential differences in the distribution of tooth transposition when stratified by gender. Tooth transposition was detected in 19 subjects (0.27%), with a 2.2:1 female male ratio (P=0.38). The most commonly observed transposition was maxillary canine-lateral incisor (60%). The frequencies of complete and incomplete transpositions were equal (10/10) and it was more common in the left side than in the right side (11/9). Of the 19 subjects, 10.5% had a peg shaped lateral incisor, 21.1% one congenitally missing tooth excluding third molar. Supernumerary tooth, impacted teeth excluding third molars, transmigrated tooth, and dilacerations were also observed. The frequency of tooth transposition was 0.27% in a Turkish Anatolian population and maxillary canine-lateral incisor was the most frequently observed transposition. Retained primary teeth were the most frequently observed dental anomaly in all types of tooth transposition.

Assessment of a prototype computer colour matching system to reproduce natural tooth colour on ceramic restorations.

PubMed

Kristiansen, Joshua; Sakai, Maiko; Da Silva, John D; Gil, Mindy; Ishikawa-Nagai, Shigemi

2011-12-01

The aim of this study was to assess the accuracy of a prototype computer colour matching (CCM) system for dental ceramics targeting the colour of natural maxillary central incisors employing a dental spectrophotometer and the Kubelka-Munk theory. Seventeen human volunteers with natural intact maxillary central incisors were selected to participate in this study. One central incisor from each subject was measured in the body region by a spectrophotometer and the reflectance values were used by the CCM system in order to generate a prescription for a ceramic mixture to reproduce the target tooth's colour. Ceramic discs were fabricated based on these prescriptions and layered on a zirconia ceramic core material of a specified colour. The colour match of each two-layered specimen to the target natural tooth was assessed by CIELAB colour coordinates (ΔE(*), ΔL(*), Δa(*) and Δb(*)). The average colour difference ΔE(*) value was 2.58±84 for the ceramic specimen-natural tooth (CS-NT) pairs. ΔL(*) values ranged from 0.17 to 2.71, Δa(*) values ranged from -1.70 to 0.61, and Δb(*) values ranged from -1.48 to 3.81. There was a moderate inverse correlation (R=-0.44, p-value=0.0721) between L(*) values for natural target teeth and ΔE(*) values; no such correlation was found for a(*) and b(*) values. The newly developed prototype CCM system has the potential to be used as an efficient tool in the reproduction of natural tooth colour. Copyright © 2011. Published by Elsevier Ltd.

Clinical measurement of the height of the interproximal contact area in maxillary anterior teeth.

PubMed

Sghaireen, Mohd G; Al-Zarea, Bader K; Al-Shorman, Hisham M; Al-Omiri, Mahmoud K

2013-11-01

To clinically quantify the apicoincisal height of interproximal areas directly in patients' mouths. Thirty participants (11 females and 9 males, mean age=26±1.5 years) were recruited into this study. Measurement of interproximal contact areas was carried out directly in patients' mouths using digital caliper (TERENSA, USA) with measuring accuracy of 0.01 mm. The interproximal contact areas that were measured are: central incisor to central incisor, central incisor to lateral incisor, lateral incisor to canine, and canine to first premolar on both sides of the jaw. Statistical significance was based on probability values less than 0.05 (p<0.05). The largest contact point was the one present between central incisors and it ranged from 2.9 to 6.5 mm. On the other hand, the contact point between canine and first premolar was the smallest on both sides of the arch and ranged from 0.6 to 2.5 mm. The dimensions of the contact points declined as we move from anterior area backwards. Statistical analysis using t-test showed that there were significant differences between the measurements of interproximal points of each tooth (P<0.05). the apicogingival dimension of the contact point decreased as we moved from anterior to posterior teeth. The contact area between the central incisors was largest and the one between canine and premolar was the smallest. This study is the first to report direct intra-oral clinical measurement of contact points. Clinical evaluation of contact point dimensions using digital caliber is a viable, quick and accurate method to use.

Mini-implant-borne Pendulum B appliance for maxillary molar distalisation: design and clinical procedure.

PubMed

Wilmes, Benedict; Katyal, Vandana; Drescher, Dieter

2014-11-01

A treatment objective of upper molar distalisation may often be required during the correction of a malocclusion. Distalisation is not only indicated for the management of Class II patients, but also for Class III surgery patients who require decompensation in the upper arch if upper incisor retrusion is needed. Unfortunately, most conventional intra-oral devices for non-compliance maxillary molar distalisation experience anchorage loss. A Pendulum type of appliance and a mini-implant-borne distalisation mechanism have been designed which can be inserted at chair-side, without a prior laboratory procedure and immediately after mini-implant placement. For re-activation purposes, a distal screw may be added to the Pendulum B appliance.

The management of an endodontically abscessed tooth: patient health state utility, decision-tree and economic analysis

PubMed Central

Balevi, Ben; Shepperd, Sasha

2007-01-01

Background A frequent encounter in clinical practice is the middle-aged adult patient complaining of a toothache caused by the spread of a carious infection into the tooth's endodontic complex. Decisions about the range of treatment options (conventional crown with a post and core technique (CC), a single tooth implant (STI), a conventional dental bridge (CDB), and a partial removable denture (RPD)) have to balance the prognosis, utility and cost. Little is know about the utility patients attach to the different treatment options for an endontically abscessed mandibular molar and maxillary incisor. We measured patients' dental-health-state utilities and ranking preferences of the treatment options for these dental problems. Methods Forty school teachers ranked their preferences for conventional crown with a post and core technique, a single tooth implant, a conventional dental bridge, and a partial removable denture using a standard gamble and willingness to pay. Data previously reported on treatment prognosis and direct "out-of-pocket" costs were used in a decision-tree and economic analysis Results The Standard Gamble utilities for the restoration of a mandibular 1st molar with either the conventional crown (CC), single-tooth-implant (STI), conventional dental bridge (CDB) or removable-partial-denture (RPD) were 74.47 [± 6.91], 78.60 [± 5.19], 76.22 [± 5.78], 64.80 [± 8.1] respectively (p < 0.05). Their respective Willingness-to-Pay ($CDN) were 1,782.05 [± 361.42], 1,871.79 [± 349.44], 1,605.13 [± 348.10], 1,351.28 [± 368.62] (p < 0.05). The standard gamble utilities for the restoration of a maxillary central incisor with a CC, STI, CDB and RPD were 88.50 [± 6.12], 90.68 [± 3.41], 89.78 [± 3.81] and 91.10 [± 3.57] respectively (p > 0.05). Their respective willingness-to-pay ($CDN) were: 1,782.05 [± 361.42], 1,871.79 [± 349.44], 1,605.13 [± 348.10] and 1,351.28 [± 368.62]. A statistical difference was found between the utility of treating a maxillary central incisor and mandibular 1st-molar (p < 0.05). The expected-utility-value for a 5-year prosthetic survival was highest for the CDB and the STI treatment of an abscessed mandibular molar (74.75 and 71.47 respectively) and maxillary incisor (86.24 and 84.91 respectively). This held up to a sensitivity analysis when the success of root canal therapy and the risk of damage to the adjacent tooth were varied. The RPD for both the molar and incisor was the favored treatment based on a cost-utility (3.85 and 2.74 CND$ per year of tooth saved respectively) and cost-benefit analysis (0.92 to 0.60 CND$ of cost per $ of benefit, respectively) for a prosthetic clinical survival of 5-years. Conclusion The position of the abscessed tooth and the amount of insurance coverage influences the utility and rank assigned by patients to the different treatment options. STI and CDB have optimal EUVs for a 5-year survival outcome, and RPD has significantly lower cost providing the better cost:benefit ratio. PMID:18053267

Factors affecting dental biofilm in patients wearing fixed orthodontic appliances.

PubMed

Mei, Li; Chieng, Joyce; Wong, Connie; Benic, Gareth; Farella, Mauro

2017-12-01

The aim of this study is to investigate the amount and the distribution of biofilm in patients wearing fixed appliances and its relation with age, gender, frequency of tooth brushing, and patient motivation. The sample comprised 52 patients (15.5 ± 3.6 years old, 30 females and 22 males) wearing fixed orthodontic appliances. Dental biofilm was assessed using a modified plaque index (PI). A questionnaire was used to collect patient's information, including gender, age, treatment motivation, and frequency of tooth brushing. Gingival (PI score = 0.9 ± 0.7), mesial (0.8 ± 0.6), and distal (0.8 ± 0.5) areas accumulated more biofilm than occlusal areas (0.3 ± 0.3) (P < 0.038). The maxillary lateral incisors (1.1 ± 0.8) and maxillary canines (1.0 ± 0.8) had more biofilm than other teeth (P < 0.05). The maxillary arch (0.8 ± 0.7) had significantly more biofilm than mandibular arch (0.6 ± 0.6) (P = 0.042). No significant difference was found between the right side (0.7 ± 0.7) and left side (0.7 ± 0.6) (P = 0.627). Less biofilm was found in females (0.6 ± 0.5), adults (0.3 ± 0.3), and "self-motivated" patients (0.3 ± 0.3), compared with males (0.9 ± 0.5), children (0.8 ± 0.6), and "family-motivated" patients (1.1 ± 0.5) (P < 0.001). The amount of biofilm was associated with self-report of the frequency of daily tooth brushing (P < 0.001). Patients wearing fixed orthodontic appliances have the highest biofilm accumulation on the maxillary lateral incisors and maxillary canines, particularly in the gingival area and areas behind arch wires. Less biofilm was observed in female and adult patients and in those who were self-motivated and brushed their teeth more often.

Hard and Soft Tissue Changes Following Maxillary Distraction Osteogenesis and Mandibular Setback with Bilateral Sagittal Split Osteotomy.

PubMed

Bawane, Shilpa S; Andrade, Neelam N

2016-12-01

(1) To highlight the role of intraoral submerged device in distraction osteogenesis (DO) of patients requiring two jaw surgeries for the correction of severe developmental maxillary hypoplasia (MH) and mandibular prognathism (MP) (2) To analyse the hard and soft tissue changes following maxillary DO and mandibular setback with bilateral sagittal split osteotomy (BSSO) in patients with severe MH and MP requiring two jaw surgeries. During the period Jan 2004 to Dec 2006, five patients with severe developmental MH along with MP were treated. In 1st stage maxillary distraction was done. Distraction started on 6th postoperative day, 1 mm distraction was carried out for 10-15 days on either side. Serial radiographs were taken immediate postoperative period for baseline comparison, post-distraction and at the end of distraction. After a period of 3-4 months of distraction 2nd stage was done. In 2nd stage, mandibular setback was done with BSSO and distractors were removed under general anesthesia. Radiographs were taken immediately and at 4 months post-operatively. Cephalometric tracings were carried out preoperatively, post DO and finally after mandibular setback with BSSO. The mean horizontal movement of maxilla was 11.4 mm at ANS and 9.6 mm at A point. Upper incisor edge was advanced by 8.8 mms. SNA increased by 8.4° and SNB decreased by 4.6°. Nasal projection advanced by 4°. Nasolabial angle normalized in all patients, mean change achieved was 10.8°. Upper lip moved forward by 5.4 mm. Lower lip moved backward by 5.4 mm. Mandible positioned backward by 4 mm at B point. No vertical change occurred in the position of A, ANS and upper incisor edges. Mean increase in skeletal angle of convexity was 26.4°. Concave profile was significantly changed to convex in all patients. Maxillary DO and mandibular setback with BSSO was associated with improved facial balance and esthetics.

Dental anomalies associated with buccally- and palatally-impacted maxillary canines.

PubMed

Sajnani, Anand K; King, Nigel M

2014-08-01

The aim of the present study was to determine the association of both buccally- and palatally-impacted canines with other dental anomalies. This retrospective study was conducted on a population of 533 southern Chinese children and adolescents who had impacted maxillary canines that had been treated in the Paediatric Dentistry and Orthodontics Clinic, Prince Philip Dental Hospital, The University of Hong Kong, Hong Kong. Descriptions of the impacted canine and other associated anomalies were obtained from the case notes and radiographs. Clinical photographs and study casts were used, where available. A total of 253 (47.5%) patients with impacted maxillary canines were diagnosed with other dental anomalies. Microdontia was the most frequently-occurring anomaly reported in these patients, with the maxillary lateral incisor the most commonly affected tooth. Other odontogenic anomalies that were associated with both buccally- and palatally-impacted canines included hypodontia, supernumerary teeth, transposition of other teeth, enamel hypoplasia, other impacted teeth, and dens invaginatus. Both buccally- and palatally-impacted canines were found to be associated with other odontogenic anomalies. © 2013 Wiley Publishing Asia Pty Ltd.

Developmental Disturbances of a Maxillary Central Incisor due to Trauma to Its Predecessor: A Case Report

PubMed Central

Karataş, Merve Safa; Sönmez, Işıl Şaroğlu

2013-01-01

Objective To report the effects of a primary tooth trauma on the underlying permanent tooth germ. Clinical Presentation and Intervention A 12-year-old girl was referred to our clinic with a complaint of poor aesthetic appearance. The crown of the permanent maxillary left central tooth exhibited an increased clinical crown height with an ‘enamel hyperplasia’ in the cervical third and had hypoplastic enamel with yellowish-brown discoloration extending from the middle third to the incisal edge. Radiographic examination revealed that the permanent maxillary left central tooth had abnormal root morphology with root dilaceration. The patient revealed a history of trauma at the age of 4 years. An aesthetic restoration with light-curing resin composite was performed on the vestibular surface of the maxillary left permanent central tooth. Conclusion Sequelae of a primary tooth trauma on the permanent tooth were restored. We recommend that parents should be aware of the consequences of untreated trauma to a primary tooth. Educational and preventive programmes on dental trauma are required to educate parents about emergency knowledge and sequelae of dental trauma. PMID:23689528

Cone-beam computed tomography evaluation of the association of cortical plate proximity and apical root resorption after orthodontic treatment.

PubMed

Nakada, Tomoo; Motoyoshi, Mitsuru; Horinuki, Eri; Shimizu, Noriyoshi

2016-01-01

We investigated the effects of proximity of the root apex to the maxillary labial cortical plate, palatal cortical plate, and incisive canal cortical plate on apical root resorption. Cone-beam computed tomography was used to measure the amount of root resorption and root apex movement around maxillary right and left central incisors in 30 adults who underwent four-bicuspid extraction followed by treatment with multibracket appliances. The patients were divided into three groups on the basis of the direction of root apex movement, after which the correlation between the amount of root resorption and root apex movement was determined. Mean apical root resorption was 1.80 ± 0.82 mm (range, 0.18-3.96 mm). The amount of root apex movement was positively correlated with the amount of root resorption on the side of pressure. Root apex proximity to the maxillary labial cortical plate, palatal cortical plate, and incisive canal cortical plate was associated with apical root resorption. Orthodontic treatment plans should carefully consider root proximity to the maxillary cortical plate. (J Oral Sci 58, 231-236, 2016).

Radiologically determined orthodontically induced external apical root resorption in incisors after non-surgical orthodontic treatment of class II division 1 malocclusion: a systematic review.

PubMed

Tieu, Long D; Saltaji, Humam; Normando, David; Flores-Mir, Carlos

2014-07-23

This study aims to critically evaluate orthodontically induced external apical root resorption (OIEARR) in incisors of patients undergoing non-surgical orthodontic treatment of class II division 1 malocclusion by a systematic review of the published data. An electronic search of two databases was performed; the bibliographies of relevant articles were also reviewed. Studies were included if they examined the amount of OIEARR in incisors produced during non-surgical orthodontic treatment of individuals with class II division I malocclusion in the permanent dentition. Individuals had no previous history of OIEARR, syndromes, pathologies, or general diseases. Study selections, risk of bias assessment, and data extraction were performed in duplicate. Eight studies of moderate methodological quality were finally included. An increased prevalence (65.6% to 98.1%) and mild to moderate severity of OIEARR (<4 mm and <1/3 original root) were reported. No sex difference in root resorption was found. For the maxillary incisors, there was no evidence that either the central or lateral incisor was more susceptible to OIEARR. A weak to moderate positive correlation between treatment duration and root resorption, and anteroposterior apical displacement and root resorption was found. Current limited evidence suggests that non-surgical comprehensive orthodontic treatment to correct class II division 1 malocclusions causes increased prevalence and severity of OIEARR the more the incisor roots are displaced and the longer this movement takes.

Age estimation based on pulp/tooth volume ratio measured on cone-beam CT images.

PubMed

Gulsahi, Ayse; Kulah, Cemal Kivanc; Bakirarar, Batuhan; Gulen, Orhan; Kamburoglu, Kivanc

2018-01-01

After tooth eruption, the size of the pulp cavity decreases with age owing to deposition of secondary dentine. The aim of this study was to investigate the relation between the chronological age and the ratio of pulp volume (PV) to tooth volume (TV) measurements using CBCT images of single rooted teeth. Maxillary anterior, canine and mandibular canine/premolar CBCT scans of patients older than 15 years of age were collected from the archives between 2013 and 2015 years. Patients with CBCT scans of teeth were seen in detail and patients with known chronological age were included. Teeth with caries, filling or crown restorations, periapical pathologies or pulps that could not be identified were excluded. Consequently, 204 patients with 655 teeth were evaluated. The PV and the TV of each tooth was measured and then the PV/TV ratio was calculated. Simple linear regression analysis was performed in order to predict age estimation by using PV/TV. The PV/TV of all teeth ranged between 0.01 and 0.08. A negative correlation was found between the PV/TV ratio and age (p < 0.05). The regression analysis showed the highest Pearson correlation (0.532) for the maxillary central incisor tooth. Considering measurements of the PV/TV of all assessed teeth, there was no significant difference in the intercept between both gender (p > 0.05). This study revealed that PV/TV ratio was not gender dependent and the strongest correlation was found between the age and PV/TV ratio measured on maxillary central incisors than other teeth.

Alterations of papilla dimensions after orthodontic closure of the maxillary midline diastema: a retrospective longitudinal study.

PubMed

Jeong, Jin-Seok; Lee, Seung-Youp; Chang, Moontaek

2016-06-01

The aim of this study was to evaluate alterations of papilla dimensions after orthodontic closure of the diastema between maxillary central incisors. Sixty patients who had a visible diastema between maxillary central incisors that had been closed by orthodontic approximation were selected for this study. Various papilla dimensions were assessed on clinical photographs and study models before the orthodontic treatment and at the follow-up examination after closure of the diastema. Influences of the variables assessed before orthodontic treatment on the alterations of papilla height (PH) and papilla base thickness (PBT) were evaluated by univariate regression analysis. To analyze potential influences of the 3-dimensional papilla dimensions before orthodontic treatment on the alterations of PH and PBT, a multiple regression model was formulated including the 3-dimensional papilla dimensions as predictor variables. On average, PH decreased by 0.80 mm and PBT increased after orthodontic closure of the diastema (P<0.01). Univariate regression analysis revealed that the PH (P=0.002) and PBT (P=0.047) before orthodontic treatment influenced the alteration of PH. With respect to the alteration of PBT, the diastema width (P=0.045) and PBT (P=0.000) were found to be influential factors. PBT before the orthodontic treatment significantly influenced the alteration of PBT in the multiple regression model. PH decreased but PBT increased after orthodontic closure of the diastema. The papilla dimensions before orthodontic treatment influenced the alterations of PH and PBT after closure of the diastema. The PBT increased more when the diastema width before the orthodontic treatment was larger.

Reconstruction of supracrestal alveolar bone lost as a result of severe chronic periodontitis. Five-year outcome: case report.

PubMed

Kotschy, Peter; Laky, Markus

2006-10-01

This patient presented with generalized severe chronic periodontitis. Conventional periodontal therapy would have left her compromised esthetically and anatomically, with growing interdental "black triangles." This prompted the authors to try to reconstruct the maxillary alveolar bone that had been lost in the previous three decades because of untreated periodontitis. To maintain the level and quality of the gingival margin, open flap surgery was performed in the maxilla soon after scaling and root planing. To gain access to the roots and bone surfaces, a flap was raised by intrasulcular incisions and the modified and simplified papilla preservation technique. After debridement, the root surfaces were conditioned and enamel matrix proteins were applied. Bovine bone mineral was placed in the infrabony defects and supracrestally (buccally, lingually, and interdentally) to help regenerate the lost alveolar bone. In addition, the defects around the maxillary anterior teeth were covered with a membrane. To prevent shrinkage of the gingiva, suspensory sutures were placed on the right central incisor and both left incisors so that the anterior flap would be positioned approximately 3 mm coronally. After surgery, the patient was advised to apply 1% chlorhexidine gel twice a day and to avoid brushing the surgical site for 4 weeks. Professional maintenance care was administered twice a week for 2 months and the patient was instructed to maintain a liquid diet for 4 weeks. The treatment outcome was evaluated clinically and radiographically at regular intervals for 5 years postsurgically. Periodontal conditions were stable and fulfilled the patient's desire to eliminate the pockets without compromising esthetics, particularly in the maxillary anterior.

Width ratios in the anterior maxillary region in a Hungarian population: addition to the golden proportion debate.

PubMed

Forster, András; Velez, Róbert; Antal, Márk; Nagy, Katalin

2013-09-01

In the last 2 decades, several studies have questioned the application of the rule of golden proportion in dentistry. The purpose of this study was to test the rule of golden proportion for the maxillary anterior region in a population of young, healthy people with excellent oral hygiene at the Faculty of Dentistry of the University of Szeged. One hundred and nine participants (36 male, 73 female) were examined, 41 of whom had previously worn orthodontic appliances. A Canon 450D camera, Canon 100 mm Macro lens, and a Sigma 140 DG ring flash were used for digital documentation. The accreditation photography protocol of the American Academy of Cosmetic Dentistry was applied to standardize the images. The width of the teeth from the frontal view was measured digitally. Tooth dimension data were collected and the Mann-Whitney U test was performed (α=.05). The relative width of the central incisors, lateral incisors, and canines was 1.6:1:0.85 on both sides. The ratios were not influenced by either sex or previous orthodontic treatment. The results demonstrated that, because of the difference in canines in this population, the golden proportion in its original form was not valid for the maxillary anterior region. Orthodontic treatment does not change the dentition toward the golden proportion. The results suggest that the rule of golden proportion should not be used for treatment planning without observing individual modifying factors. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Comparing esthetic smile perceptions among laypersons with and without orthodontic treatment experience and dentists

PubMed Central

An, Seong-Mu; Choi, Sun-Young; Chung, Young-Wook; Jang, Tae-Ho

2014-01-01

Objective The purpose of this study was to examine whether orthodontic treatment experience affects the individual's perception of smile esthetics and to evaluate differences among orthodontically treated laypersons, non-treated laypersons, and dentists by using computerized image alterations. Methods A photograph of a woman's smile was digitally altered using a software image editing program. The alterations involved gingival margin height, crown width and length, incisal plane canting, and dental midline of the maxillary anterior teeth. Three groups of raters (orthodontically treated laypersons, non-treated laypersons, and dentists) evaluated the original and altered images using a visual analog scale. Results The threshold for detecting changes in maxillary central incisor gingival margin height among laypersons was 1.5 mm; the threshold of dentists, who were more perceptive, was 1.0 mm. For maxillary lateral incisor crown width and height, the threshold of all three groups was 3.0 mm. Canting of the incisal plane was perceived when the canting was 3.0 mm among non-treated laypersons, 2.0 mm among treated laypersons, and 1.0 mm among dentists. Non-treated laypersons could not perceive dental midline shifts; however, treated laypersons and dentists perceived them when the shift was ≥ 3.0 mm. Conclusions Laypersons with and without orthodontic treatment experience and dentists have different perceptions of smile esthetics. Orthodontically treated laypersons were more critical than non-treated laypersons regarding incisal plane canting and dental midline shifts. Based on these findings, it is suggested that orthodontic treatment experience improved the esthetic perceptions of laypersons. PMID:25473645

Ethnic Association of Cusp of Carabelli Trait and Shoveling Trait in an Indian Population

PubMed Central

Manju, M; Praveen, R; Umesh, W

2016-01-01

Introduction Variations in the structure of teeth have always been of great interest to the dentist from the scientific as well as practical point of view. Additionally, ever since decades inter trait relationships have been a useful means to categorize populations to which an individual belongs. Aim To determine the association between Cusp of Carabelli and Shoveling Trait in a selected Indian population native of Bangalore city, Karnataka, India. Materials and Methods A cross-sectional study was carried out in 1885 children aged between 7-10 years. Casts of the study subjects were made to study the presence of Cusp of Carabelli of right maxillary permanent molar and shoveling trait of right maxillary permanent central incisor using the Dahlberg’s classification and Hrdliucka’s classification respectively. Linear regression was used to assess the association of cusp of carabelli trait with the tooth dimensions and logistic regression was used to evaluate the association of the carabelli trait with gender and presence/absence of shoveling. Results A 40.5% of subjects had Cusp of Carabelli on first molar and 68.2% had shoveling on upper central incisor. The study revealed positive association between the two traits studied in the population. A significant difference was also found with presence of Cusp of Carabelli and the buccolingual tooth dimension of the maxillary molar (p<0.05). Conclusion There is an association between the Cusp of Carabelli and the shoveling trait in the present study population, and this will be valuable in the determination of ethnic origin of an individual. PMID:27135008

Incisors’ proportions in smile esthetics

PubMed Central

Alsulaimani, Fahad F; Batwa, Waeil

2013-01-01

Aims: To determine whether alteration of the maxillary central and lateral incisors’ length and width, respectively, would affect perceived smile esthetics and to validate the most esthetic length and width, respectively, for the central and lateral incisors. Materials and Methods: Photographic manipulation was undertaken to produce two sets of photographs, each set of four photographs showing the altered width of the lateral incisor and length of the central length. The eight produced photographs were assessed by laypeople, dentists and orthodontists. Results: Alteration in the incisors’ proportion affected the relative smile attractiveness for laypeople (n=124), dentists (n=115) and orthodontists (n=68); dentists and orthodontists did not accept lateral width reduction of more than 0.5 mm (P<0.01), which suggests that the lateral to central incisor width ratio ranges from 54% to 62%. However, laypeople did not accept lateral width reduction of more than 1 mm (P<0.01), widening the range to be from 48% to 62%. All groups had zero tolerance for changes in central crown length (P<0.01). Conclusion: All participants recognized that the central incisors’ length changes. For lateral incisors, laypeople were more tolerant than dentists and orthodontists. This suggests that changing incisors’ proportions affects the relative smile attractiveness. PMID:24987650

Spontaneous correction of anterior crossbite by RPE anchored on deciduous teeth in the early mixed dentition.

PubMed

Rosa, M; Lucchi, P; Mariani, L; Caprioglio, A

2012-09-01

The purpose of this study was to evaluate the effectiveness of Haas RPE anchored on deciduous teeth in the early mixed dentition, for inducing the spontaneous correction of permanent incisor's crossbite, without compliance, without post bite-plane and no involvement of the permanent teeth. The sample group comprised 50 consecutive patients (mean age 8y 5m, SD 2y 1m), 31 males, 19 females. They showed a cross-bite affecting one or more permanent incisors, for a total of 70 teeth. The patients were treated with Haas RPE appliance anchored on second deciduous molars and bonded on deciduous canines. No direct forces were applied on the permanent teeth. Anterior crossbite self-corrected 'spontaneously' in 84% of the cases. Lateral incisors had a higher rate of self-correction than central incisors. All hyper-divergent subjects showed a spontaneous crossbite self-correction. The early maxillary expansion by Haas RPE anchored on deciduous teeth is an efficient and effective procedure to induce the anterior crossbite self-correction in the early mixed dentition without the need of a bite-plane, no involvement of the permanent teeth and without compliance.

Biologic restoration of a traumatized maxillary central incisor in a toddler: a case report.

PubMed

John, Sheen Ann; Anandaraj, S; George, Sageena

2014-01-01

Trauma to the anterior teeth is relatively common in young children and teenagers. Traumatized anterior teeth require quick functional and aesthetic repair, and poses a challenge to the dental practitioner owing to the lack of co-operation ceded and the longer time invested. Reattachment of tooth fragment should be the first choice to restoring teeth when a usable fragment is available, since it gives a psychological and aesthetic advantage over the conventional technique. With the vast improvement in adhesive technology, reattachment is definitely a predictable treatment option for very young children. This paper describes the treatment of a 2½ year old female child who sustained crown-root fracture, extending subgingivally, in primary upper central incisor.

Treatment of combined endodontic: periodontic lesion by sealing of palato-radicular groove using biodentine.

PubMed

Naik, Mayuri; de Ataide, Ida de Noronha; Fernandes, Marina; Lambor, Rajan

2014-11-01

Palatoradicular groove is a developmental anomaly which is predominantly found in maxillary lateral incisors. It provides a susceptible alcove for the progression of localised periodontal inflammation which can further cause pulpal involvement. This case report describes the successful treatment of a large periodontic - endodontic lesion usingnon surgical endodontic therapy and biodentine for the sealing of the palatoradicular groove.

Comparison of the force applied on oral structures during intubation attempts by novice physicians between the Macintosh direct laryngoscope, Airway Scope and C-MAC PM: a high-fidelity simulator-based study.

PubMed

Nakanishi, Taizo; Shiga, Takashi; Homma, Yosuke; Koyama, Yasuaki; Goto, Tadahiro

2016-05-23

We examined whether the use of Airway Scope (AWS) and C-MAC PM (C-MAC) decreased the force applied on oral structures during intubation attempts as compared with the force applied with the use of Macintosh direct laryngoscope (DL). Prospective cross-over study. A total of 35 novice physicians participated. We used 6 simulation scenarios based on the difficulty of intubation and intubation devices. Our primary outcome measures were the maximum force applied on the maxillary incisors and tongue during intubation attempts, measured by a high-fidelity simulator. The maximum force applied on maxillary incisors was higher with the use of the C-MAC than with the DL and AWS in the normal airway scenario (DL, 26 Newton (N); AWS, 18 N; C-MAC, 52 N; p<0.01) and the difficult airway scenario (DL, 42 N; AWS, 24 N; C-MAC, 68 N; p<0.01). In contrast, the maximum force applied on the tongue was higher with the use of the DL than with the AWS and C-MAC in both airway scenarios (DL, 16 N; AWS, 1 N; C-MAC, 7 N; p<0.01 in the normal airway scenario; DL, 12 N; AWS, 4 N; C-MAC, 7 N; p<0.01 in the difficult airway scenario). The use of C-MAC, compared with the DL and AWS, was associated with the higher maximum force applied on maxillary incisors during intubation attempts. In contrast, the use of video laryngoscopes was associated with the lower force applied on the tongue in both airway scenarios, compared with the DL. Our study was a simulation-based study, and further research on living patients would be warranted. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Three-dimensional stereophotogrammetric analysis of 50 smiles: A study of dento-facial proportions.

PubMed

Ceinos, R; Lupi, L; Tellier, A; Bertrand, M F

2017-11-12

The purpose of this study was to analyze 50 smiles using 3D stereophotogrammetry (3D-spg)-based facial reconstruction, to calculate ratios involving measurements of the distances between dental and facial landmarks and to compare these ratios with the golden ratio φ (1.618). Fifty subjects with no obvious malocclusion participated in this study. For each subject, 4 photographs were acquired using the LifeViz Mini™, an absolute calibration 3D-spg system. Facial and dental landmarks (based on Farkas' definitions) were fixed, and 8 distances were measured. Four ratios were then calculated and compared with the value of 1.618. The ratio "incisal edge of the maxillary central incisor-lower border of the chin/subnasal point-incisal edge of the maxillary central incisor" (IE-Me/SN-IE) was 1.693 ± 0.190, the ratio "right endocanthion-left endocanthion/right exocanthion-right endocanthion" was 1.582 ± 0.173, the ratio "incisal edge of the maxillary central incisor-distal edge of the right canine/distal edge of the right canine-right labial commissure" was 1.670 ± 0.355, and the ratio "right labial commissure-left labial commissure/distal edge of the right canine-distal edge of the left canine" was 1.602 ± 0.136. In contrast, the vertical ratio IE-Me/SN-IE significantly differed from the golden ratio (1 sample t test, P = .009). This study revealed that the observed ratios were surprisingly close to the golden ratio. Only the vertical ratio differed from the golden ratio, whereas the horizontal ratios appear to be adequately approximated by φ. If the distances from reference points of the face to teeth within a harmonious smile exhibited recurring esthetic proportions, knowledge of such ratios would provide an additional tool for the elaboration of esthetic treatment plans. In addition, this knowledge could provide guidance when planning tooth positions and dental proportions by encouraging consideration of the global nature of the oro-facial sphere. © 2017 Wiley Periodicals, Inc.

Surgical Management of Compound Odontoma Associated with Unerupted Tooth

PubMed Central

Marini, Roberta; Pacifici, Luciano

2015-01-01

Odontomas represent the most common type of odontogenic benign jaws tumors among patients younger than 20 years of age. These tumors are composed of enamel, dentine, cementum, and pulp tissue. According to the World Health Organization classification, two distinct types of odontomas are acknowledged: complex and compound odontoma. In complex odontomas, all dental tissues are formed, but appeared without an organized structure. In compound odontomas, all dental tissues are arranged in numerous tooth-like structures known as denticles. Compound odontomas are often associated with impacted adjacent permanent teeth and their surgical removal represents the best therapeutic option. A case of a 20-year-old male patient with a compound odontoma-associated of impacted maxillary canine is presented. A minimally invasive surgical technique is adopted to remove the least amount of bone tissue as far as possible. PMID:26199762

Clinicopathological study of 252 jaw bone periapical lesions from a private pathology laboratory.

PubMed

Lin, Hung-Pin; Chen, Hsin-Ming; Yu, Chuan-Hang; Kuo, Ru-Cheng; Kuo, Ying-Shiung; Wang, Yi-Ping

2010-11-01

Periapical lesions are common sequelae of pulp diseases. This retrospective study evaluated the clinical and histopathological features of periapical lesions sent to a private pathology laboratory by dentists in private clinics. Two hundred and fifty-two consecutive cases of periapical lesions were collected from September 2005 to October 2009. Clinical data and histopathological features of these periapical lesions were reviewed and analyzed. The 252 periapical lesions consisted of 128 periapical granulomas, 117 periapical cysts, and seven periapical scars. These 252 lesions were taken from 252 patients (92 men and 160 women; mean age = 43.6 years; range, 9-81 years). Of the 252 periapical lesions, 186 were found in the maxilla and 66 in the mandible. The most common site for periapical lesions was the maxillary anterior region (134 cases, including 73 granulomas, 54 cysts and 7 scars), and the most frequently involved tooth was the maxillary lateral incisor (64 cases, including 29 granulomas, 31 cysts and 4 scars). Of the 117 periapical cysts, 116 were lined by stratified squamous epithelium and one by mucoepidermoid epithelium. Hyaline bodies were discovered in the lining epithelium of four periapical cysts. Odontogenic epithelial rest, cholesterol cleft, foamy histiocytes, hemosiderin-laden macrophages, dystrophic calcification, foreign bodies, and bacterial clumps were found in five, three, nine, two, 28, 10 and one periapical granulomas, respectively, as well as in six, 11, eight, seven, 19, nine and eight periapical cysts, respectively. Granulomas and cysts were the two most common periapical lesions. Periapical lesions occurred more frequently in female patients and in those in their fourth to fifth decades. The most commonly affected site for periapical lesions was the maxillary anterior region, and the most frequently involved tooth was the maxillary lateral incisor. Copyright © 2010 Formosan Medical Association & Elsevier. Published by Elsevier B.V. All rights reserved.

A comparison of apical root resorption after orthodontic treatment with surgical exposure and traction of maxillary impacted canines versus that without impactions.

PubMed

Lempesi, Evangelia; Pandis, Nikolaos; Fleming, Padhraig S; Mavragani, Maria

2014-12-01

Orthodontic management of maxillary canine impaction (MCI), including forced eruption, may result in significant root resorption; however, the association between MCI and orthodontically induced root resorption (OIRR) is not yet sufficiently established. The purpose of this retrospective cohort study was to comparatively evaluate the severity of OIRR of maxillary incisors in orthodontically treated patients with MCI. Additionally, impaction characteristics were associated with OIRR severity. The sample comprised 48 patients undergoing fixed-appliance treatment-24 with unilateral/bilateral MCI and 24 matched controls without impaction. OIRR was calculated using pre- and post-operative panoramic tomograms. The orientation of eruption path, height, sector location, and follicle/tooth ratio of the impacted canine were also recorded. Mann-Whitney U-test and univariate and multivariate linear mixed models were used to test for the associations of interest. Maxillary central left incisor underwent more OIRR in the impaction group (mean difference = 0.58mm, P = 0.04). Overall, the impaction group had 0.38mm more OIRR compared to the control (95% confidence interval, CI: 0.03, 0.74; P = 0.04). However, multivariate analysis demonstrated no difference in the amount of OIRR between impaction and non-impaction groups overall. A positive association between OIRR and initial root length was observed (95% CI: 0.08, 0.27; P < 0.001). The severity of canine impaction was not found to be a significant predictor of OIRR. This study was a retrospective study and used panoramic tomograms for OIRR measurements. This study indicates that MCI is a weak OIRR predictor. Interpretation of the results needs caution due to the observational nature of the present study. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Dentofacial effects of skeletal anchored treatment modalities for the correction of maxillary retrognathia.

PubMed

Sar, Cağla; Sahinoğlu, Zahire; Özçirpici, Ayça Arman; Uçkan, Sina

2014-01-01

The aim of this clinical study was to investigate the skeletal, dentoalveolar, and soft-tissue effects of 2 skeletal anchorage rationales for Class III treatment compared with an untreated Class III control group. Fifty-one subjects who were in the prepubertal or pubertal growth period were included in the study. In group 1 (n = 17), facemasks were applied from miniplates placed in the lateral nasal walls of the maxilla, and intermaxillary Class III elastics were applied from symphyseal miniplates to a bonded appliance on the maxilla in group 2 (n = 17). These skeletal anchored groups were compared with an untreated control group (n = 17). Lateral cephalometric radiographs were obtained at the beginning and the end of the observation periods in all groups and analyzed according to the structural superimposition method. Differences between the groups were assessed with the Wilcoxon signed rank test or the paired-samples t test. The treatment periods were 7.4 and 7.6 months in groups 1 and 2, respectively, and the untreated control group was observed for 7.5 months. The maxilla moved forward by 3.11 mm in group 1 and by 3.82 mm in group 2. The counterclockwise rotation of the maxilla was significantly less in group 1 compared with group 2 (P <0.01). The mandible showed clockwise rotation and was positioned downward and backward in the treatment groups, and it was significantly greater in group 2 compared with group 1 (P <0.01). Changes in the maxillary incisor measurements were negligible in group 1 compared with group 2. A significant amount of mandibular incisor retroclination was seen in group 1, and a significant proclination was seen in group 2. The maxillomandibular relationships and the soft-tissue profiles were improved remarkably in both treatment groups. The protocols of miniplates with facemasks and miniplates with Class III elastics offer valid alternatives to conventional methods in severe skeletal Class III patients. However, the 2 maxillary protraction protocols demonstrated significant skeletal and dentoalveolar effects. The miniplate with facemask protocol is preferred for patients with severe maxillary retrusion and a high-angle vertical pattern, whereas in patients with a decreased or normal vertical pattern and retroclined mandibular incisors, miniplates with Class III elastics can be the intraoral treatment option. Therefore, the exact indication of the procedure should be considered carefully. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Unilateral maxillary molar distalization with zygoma-gear appliance.

PubMed

Kilkis, Dogan; Bayram, Mehmet; Celikoglu, Mevlut; Nur, Metin

2012-08-01

The aim of this study was to present the orthodontic treatment of a 15-year-old boy with a unilateral maxillary molar distalization system, called the zygoma-gear appliance. It consisted of a zygomatic anchorage miniplate, an inner bow, and a Sentalloy closed coil spring (GAC International, Bohemia, NY). A distalizing force of 350 g was used during the distalization period. The unilateral Class II malocclusion was corrected in 5 months with the zygoma-gear appliance. The maxillary left first molar showed distalization of 4 mm with an inclination of 3°. The maxillary premolars moved distally with the help of the transseptal fibers. In addition, there were slight decreases in overjet (-0.5 mm) and maxillary incisor inclination (-1°), indicating no anchorage loss from the zygoma-gear appliance. Preadjusted fixed appliances (0.022 × 0.028-in, MBT system; 3M Unitek, Monrovia, Calif) were placed in both arches to achieve leveling and alignment. After 14 months of unilateral distalization with the zygoma-gear appliance and fixed appliances, Class I molar and canine relationships were established with satisfactory interdigitation of the posterior teeth. Acceptable overjet and overbite were also achieved. This article shows that this new system, the zygoma-gear appliance, can be used for unilateral maxillary molar distalization without anchorage loss. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Three-dimensional analysis of maxillary changes associated with facemask and rapid maxillary expansion compared with bone anchored maxillary protraction

PubMed Central

Hino, Claudia Toyama; Cevidanes, Lucia H. S.; Nguyen, Tung T.; De Clerck, Hugo J.; Franchi, Lorenzo; McNamara, James A.

2014-01-01

Introduction Our objectives in this study were to evaluate in 3 dimensions the growth and treatment effects on the midface and the maxillary dentition produced by facemask therapy in association with rapid maxillary expansion (RME/FM) compared with bone-anchored maxillary protraction (BAMP). Methods Forty-six patients with Class III malocclusion were treated with either RME/FM (n = 21) or BAMP (n = 25). Three-dimensional models generated from cone-beam computed tomographic scans, taken before and after approximately 1 year of treatment, were registered on the anterior cranial base and measured using color-coded maps and semitransparent overlays. Results The skeletal changes in the maxilla and the right and left zygomas were on average 2.6 mm in the RME/FM group and 3.7 mm in the BAMP group; these were different statistically. Seven RME/FM patients and 4 BAMP patients had a predominantly vertical displacement of the maxilla. The dental changes at the maxillary incisors were on average 3.2 mm in the RME/FM group and 4.3 mm in the BAMP group. Ten RME/FM patients had greater dental compensations than skeletal changes. Conclusions This 3-dimensional study shows that orthopedic changes can be obtained with both RME/FM and BAMP treatments, with protraction of the maxilla and the zygomas. Approximately half of the RME/FM patients had greater dental than skeletal changes, and a third of the RME/FM compared with 17% of the BAMP patients had a predominantly vertical maxillary displacement. PMID:24182587

Traumatic dental injuries to primary incisors and the terminal or occlusal plane relationship in Indian preschool children.

PubMed

Shekhar, M G; Mohan, R

2011-03-01

To determine the prevalence of traumatic dental injuries to primary incisors in 3-5 year-old preschool children and to study the relationship between dental injuries and age, gender and terminal plane relation. A cross-sectional study was conducted in 1,126 preschool children aged three to five years enrolled in eleven private and public nursery schools, randomly selected in Chennai, India. Data regarding the age, gender, cause and type of trauma and terminal plane relation were recorded. Maxillary and mandibular primary incisors were examined for traumatic injuries and were recorded according to the method described by Andreasen & Andreasen (1994). Data were analyzed through descriptive analysis and chi-square test. Traumatic injuries to primary incisors were identified in 6.2% of children. No significant gender differences in prevalence were seen (p > 0.05). Enamel fractures (57.3%) dominated amongst the type of injuries. Majority of children who sustained traumatic dental injuries to their primary incisors were associated with mesial step molar relation. Mesial step molar relation may be considered one of the possible predisposing factors to trauma in primary dentition. Further, there is need to intensify oral health education targeted at both parents and teachers at nursery schools to inform them about consequences of primary teeth injuries on permanent dentition and emphasize the importance of prevention of dental injuries in children.

New method of assessing the relationship between buccal bone thickness and gingival thickness

PubMed Central

2016-01-01

Purpose The aim of this study was to determine the relationship between buccal bone thickness and gingival thickness by means of a noninvasive and relatively accurate digital registration method. Methods In 20 periodontally healthy subjects, cone-beam computed tomographic images and intraoral scanned files were obtained. Measurements of buccal bone thickness and gingival thickness at the central incisors, lateral incisors, and canines were performed at points 0–5 mm from the alveolar crest on the superimposed images. The Friedman test was used to compare buccal bone and gingival thickness for each depth between the 3 tooth types. Spearman's correlation coefficient was calculated to assess the correlation between buccal bone thickness and gingival thickness. Results Of the central incisors, 77% of all sites had a buccal thickness of 0.5–1.0 mm, and 23% had a thickness of 1.0–1.5 mm. Of the lateral incisors, 71% of sites demonstrated a buccal bone thickness <1.0 mm, as did 63% of the canine sites. For gingival thickness, the proportion of sites <1.0 mm was 88%, 82%, and 91% for the central incisors, lateral incisors, and canines, respectively. Significant differences were observed in gingival thickness at the alveolar crest level (G0) between the central incisors and canines (P=0.032) and between the central incisors and lateral incisors (P=0.013). At 1 mm inferior to the alveolar crest, a difference was found between the central incisors and canines (P=0.025). The lateral incisors and canines showed a significant difference for buccal bone thickness 5 mm under the alveolar crest (P=0.025). Conclusions The gingiva and buccal bone of the anterior maxillary teeth were found to be relatively thin (<1 mm) overall. A tendency was found for gingival thickness to increase and bone thickness to decrease toward the root apex. Differences were found between teeth at some positions, although the correlation between buccal bone thickness and soft tissue thickness was generally not significant. PMID:28050315

Influence of the vertical position of maxillary central incisors on the perception of smile esthetics among orthodontists and laypersons.

PubMed

Machado, Andre Wilson; McComb, Ryan W; Moon, Won; Gandini, Luiz Gonzaga

2013-12-01

The purpose of this study was to determine the perception of smile esthetics among orthodontists and laypeople with respect to different upper central incisor vertical positions in a frontal smile analysis. A frontal close-up smile photo of an adult Caucasian woman was selected. The patient had healthy upper anterior dentition and had no history of orthodontic treatment. Images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. All images were assessed in three different views: full smile, gingival close-up excluding incisal edges, and incisal close-up excluding gingival margins. Images were randomly assembled in an album, which was given to 120 judges: 60 orthodontists and 60 laypersons. Each rater was asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were then statistically analyzed. The highest rated smiles showed two notable characteristics: the central-to-lateral incisal step was 1.5 mm; and the central incisor gingival margins matched the laterals, and both were 0.5 mm below the line of the canine gingival margins. The least attractive smile was the one with no step between the centrals and laterals, and with the central incisor gingival margins 1.0 mm above the canine gingival margins. The results of this study indicate that slightly extruded upper central incisors are more esthetically preferred than intruded. The upper central incisors are the key determinant in evaluating smile esthetics, and thus, the assessment of their ideal vertical positioning is an aspect of paramount importance. © 2013 Wiley Periodicals, Inc.

Significance of crown shape in the replacement of a central incisor with a single implant-supported crown.

PubMed

Gobbato, Luca; Paniz, Gianluca; Mazzocco, Fabio; Chierico, Andrea; Tsukiyama, Teppei; Levi, Paul A; Weisgold, Arnold S

2013-05-01

When utilizing a single implant-supported crown to replace a central incisor, understanding the final shape of the implant restoration is an important factor to help achieve a successful esthetic outcome. In today's dentistry, tooth shape is a critical factor when dental implant prostheses are considered in the esthetic zone. The major esthetic goal for this type of restoration is to achieve the closest possible symmetry with the adjacent tooth, both at the soft and at the hard tissue levels. The goal of this study was to objectively analyze the significance of natural crown shape when replacing a central incisor with a single implant-supported crown. In this study, we investigated the shape of the crowns of maxillary central incisors in 60 individuals who presented to our clinics with an untreatable central incisor. The presence of a dental diastema, "black triangle," presence or absence of gingival symmetry, and the presence or absence of dental symmetry were recorded in the pre- and postoperative photographs. Out of 60 patients, 33.3% had triangular-shaped crowns, 16.6% square/tapered, and 50% square-shaped crown form. After treatment was rendered, 65% of the triangular group, 40% of the square/tapered group, and 13.3% of the square group required an additional restoration on the adjacent central incisor in order to fulfill the esthetic needs of the patients. Data analysis revealed that if there is a "black triangle," a diastema, or presence of dental or gingival asymmetry, an additional restoration on the adjacent central incisor is often required in order to fulfill esthetic goals. The additional restoration is highly recommended in situations with a triangular crown shape, while it is suggested in cases of square/tapered and square tooth shapes in the presence of a dental diastema.

Amelogenesis imperfecta associated with dental follicular-like hamartomas and generalised gingival enlargement.

PubMed

O'Connell, S; Davies, J; Smallridge, J; Vaidyanathan, M

2014-10-01

Amelogenesis imperfecta (AI) is an inherited disorder characterised by generalised defects of dental enamel, but has been associated with other dental and medical conditions. It affects the appearance and structure of teeth, both in the primary and secondary dentition. AI in the presence of dental follicular hamartomas and gingival hyperplasia is rare and the management presents several challenges to the clinician. This article describes a case of a girl who presented to the paediatric department at the age of 7 years complaining of discomfort when eating and that she was unhappy with the appearance of her anterior teeth. The patient was born in the UK but she and her family were African and of Kenyan origin. She was otherwise fit and well. Investigations included clinical, radiographic and pathological examination as well as cone beam computed tomography imaging and X-ray Microtomography of extracted primary teeth. A diagnosis of AI in the presence of dental follicular hamartomas and generalised gingival hyperplasia was made, which had resulted in the delayed eruption of permanent teeth and an associated anterior open bite. There was no family history of dental defects. Initial treatment included preventative advice and the application of preformed metal crowns on all primary molars. Extraction of all remaining primary incisors was carried out followed by gingivectomy around the maxillary permanent incisors, mandibular central incisors and maxillary left second primary molar. Composite resin reconstruction of all permanent incisors and mandibular primary canines was complicated by the poor quality of enamel. Orthodontic extrusion of the anterior incisors was carried out to improve surface area for bonding with some success. A multidisciplinary team managed this case and decided that no surgical intervention of the dental follicular hamartomas was warranted. The patient coped well with treatment and attended for regular review over an 8-year period. She was reviewed at 6 monthly intervals clinically by a paediatric dentist and radiographs were taken as required to monitor the hamartomas, maintain the restorations and monitor her dental development. She was also seen on the multidisciplinary clinic once a year. This is the first case of its kind to be reported in the UK and the 8th worldwide. While this condition is rare, it is important that paediatric dentists are made aware of it.

Spontaneous correction of pathologic tooth migration and reduced infrabony pockets following nonsurgical periodontal therapy: a case report.

PubMed

Sato, Shuichi; Ujiie, Hisashi; Ito, Koichi

2004-10-01

This case report describes the spontaneous correction of pathologic tooth migration and reduced infrabony pockets after nonsurgical periodontal therapy. A 3-mm diastema between the maxillary incisors was closed completely, and the mandibular teeth, which had migrated pathologically, returned to the optimal position. Clinical evaluation showed a significant reduction in probing depth, with increased clinical attachment and bone deposition demonstrated radiologically.

Management of a midroot and complicated crown fracture: a case report.

PubMed

Sheikh-Nezami, M; Mokhber, N; Shamsian, Kh; Saket, S

2009-05-01

This case report illustrates the management of a permanent right central maxillary incisor with midroot fracture and complicated crown fracture, which was treated by cervical pulpotomy and fixation of the fragments. After 4-month follow-up, radiography showed healing with interproximal bone and connective tissue at the fracture line at midroot. After 3 years, the tooth was still functional without any clinical sign and symptom.

Treatment of combined endodontic: periodontic lesion by sealing of palato-radicular groove using biodentine

PubMed Central

Naik, Mayuri; de Ataide, Ida de Noronha; Fernandes, Marina; Lambor, Rajan

2014-01-01

Introduction: Palatoradicular groove is a developmental anomaly which is predominantly found in maxillary lateral incisors. It provides a susceptible alcove for the progression of localised periodontal inflammation which can further cause pulpal involvement. This case report describes the successful treatment of a large periodontic – endodontic lesion usingnon surgical endodontic therapy and biodentine for the sealing of the palatoradicular groove. PMID:25506153

Evaluation of an optimized shade guide made from porcelain powder mixtures.

PubMed

Wang, Peng; Wei, Jiaqiang; Li, Qing; Wang, Yining

2014-12-01

Color errors associated with current shade guides and problems with color selection and duplication are still challenging for restorative dentists. The purpose of this study was to evaluate an optimized shade guide for visual shade duplication. Color distributions (L*, a*, and b*) of the maxillary left central incisors of 236 participants, whose ages ranged from 20 to 60, were measured with a spectrophotometer. Based on this color map, an optimized shade guide was designed with 14 shade tabs evenly distributed within the given color range of the natural incisors. The shade tabs were fabricated with porcelain powder mixtures and conventional laboratory procedures. A comparison of shade duplication by using the optimized and Vitapan Classical shade guides was conducted. Thirty Chinese participants were involved, and the colors of the left maxillary incisors were selected by using 2 shade guides. Metal ceramic crowns were fabricated according to the results of the shade selection. The colors of the shade tabs, natural teeth, and the ceramic crowns were measured with a spectrophotometer. The color differences among the natural teeth, the shade tabs, and the corresponding metal ceramic crowns were calculated and analyzed (α=.017). Significant differences were found in both phases of shade determination and shade duplication (P<.017). The total number of color errors with the optimized shade guide was 3.5, which was significantly less than that of Vitapan, 5.1 (P<.001). The optimized shade guide system improved performance not only in the color selection phase but also in the color of the fabricated crowns. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Nonsurgical correction of a Class III malocclusion in an adult by miniscrew-assisted mandibular dentition distalization.

PubMed

Jing, Yan; Han, Xianglong; Guo, Yongwen; Li, Jingyu; Bai, Ding

2013-06-01

This article reports the successful use of miniscrews in the mandible to treat a 20-year-old Mongolian woman with a chief complaint of anterior crossbite. The patient had a skeletal Class III malocclusion with a mildly protrusive mandible, an anterior crossbite, and a deviated midline. In light of the advantages for reconstruction of the occlusal plane and distal en-masse movement of the mandibular arch, we used a multiloop edgewise archwire in the initial stage. However, the maxillary incisors were in excessive labioversion accompanied by little retraction of the mandibular incisors; these results were obviously not satisfying after 4 months of multiloop edgewise archwire treatment. Two miniscrews were subsequently implanted vertically in the external oblique ridge areas of the bilateral mandibular ramus as skeletal anchorage for en-masse distalization of the mandibular dentition. During treatment, the mandibular anterior teeth were retracted about 4.0 mm without negative lingual inclinations. The movement of the mandibular first molar was almost bodily translation. The maxillary incisors maintained good inclinations by rotating their brackets 180° along with the outstanding performance of the beta-titanium wire. The patient received a harmonious facial balance, an attractive smile, and ideal occlusal relationships. The outcome was stable after 1 year of retention. Our results suggest that the application of miniscrews in the posterior area of the mandible is an effective approach for Class III camouflage treatment. This technique requires minimal compliance and is particularly useful for correcting Class III patients with mild mandibular protrusion and minor crowding. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Smile esthetics: Impact of variations in the vertical and horizontal dimensions of the maxillary lateral incisors

PubMed Central

Al Taki, Amjad; Hamdan, Ahmad Mohammad; Mustafa, Ziad; Hassan, Mawada; Abu-Alhuda, Sami

2017-01-01

Objective: The purpose of this study was to determine the perception of trained dental professionals and laypersons toward the esthetic impact of variations in the vertical position, width, and gingival height of the maxillary lateral incisor. Materials and Methods: The present study analyzed the perspective of smile photographs by dental professionals such as “fifty orthodontics and fifty general dental practitioners (GDPs)” as well as fifty laypersons, consisting of an equal number of male and female participants. Photographs edited to depict alteration of golden proportion, incisal length, and gingival height of lateral incisor. SPSS software was used to analyze the data and determine the significant difference within all the participants, at 0.05% level (95% confidence interval). Results: There was no significant difference in ranking between the genders. Golden proportion of 62%–67% were ranked the highest by orthodontists, whereas GDPs and laypersons preferred 67%. Regarding gingival display, corrected height of −0.5 and −1 mm received highest ranking from all the three groups. In case of lateral incisal length, −0.5 mm was ranked highest by laypersons, in contrast to −1 mm by orthodontists and GDPs. Conclusion: Specific differences were observed in the ranking of smile esthetics by health-care professionals and laypersons. Golden proportion of 62% and 67% were ranked the highest by orthodontists, whereas GDPs and laypersons preferred 67%. Corrected gingival height of −0.5 and −1 mm received highest ranking from all the three groups. In case of lateral incisal length, −0.5 mm was ranked highest by laypersons, in contrast to −1 mm by orthodontists and GDPs. PMID:29279680

Space closing versus space opening for bilateral missing upper laterals - aesthetic judgments of laypeople: a web-based survey.

PubMed

Qadri, Salim; Parkin, Nicola A; Benson, Philip E

2016-06-01

To investigate the opinions of laypeople regarding the aesthetic outcome of treating patients with developmental absence of both maxillary lateral incisors using either orthodontic space closure (OSC) or space opening and prosthetic replacement (PR). Cross sectional, web-based survey. A panel of five orthodontists and five restorative dentists examined post-treatment intra-oral images of 21 patients with developmental absence of both upper lateral incisors. A consensus view was obtained about the 10 most attractive images (5 OSC; 5 PR). The 10 selected images were used in a web-based survey involving staff and students at the University of Sheffield. In the first section, the participants were asked to evaluate the attractiveness of the 10 randomly arranged single images using a 5-point Likert scale. In the second section, an image of OSC was paired with an image of PR according to their attractiveness ranking by the clinician panel, and the participants were asked to indicate which of the two images they preferred. The survey received 959 completed responses with 9590 judgements. The images of OSC were perceived to be more attractive (mean rating 3·34 out of 5; SD 0·56) compared with the images of PR (mean rating 3·14 out of 5; SD 0·58) (mean diff 0·21; P < 0·001). Female and staff judges tended to give higher attractiveness ratings. Both females and males preferred the OSC images closing in 3 out of 4 paired images. Space closing was perceived to be more attractive than space opening by lay people. The findings have implications for advising patients about the best aesthetic outcome when both maxillary lateral incisors are missing.

Nonsurgical Management of an Immature Maxillary Central Incisor with Type III Dens Invaginatus Using MTA Plug: A Case Report

PubMed Central

Norouzi, Negar; Kazem, Majid; Gohari, Atefeh

2017-01-01

Dens invaginatus is a developmental anomaly, caused by deepening of the enamel organ into the dental papilla before calcification of the dental tissues. Teeth with dens invagination are susceptible to early caries and pulp necrosis within a few years of eruption or even before root end closure. This article reports two immature maxillary central incisors with type I and III dens invaginatus which had necrotic pulp and a large periradicular lesion, that were treated successfully by nonsurgical root canal treatment. After apical plug placement, the remaining space was backfilled using warm vertical gutta-percha technique and the crowns were restored by composite restoration. At 6 months of follow up the patient was asymptomatic and probing depths were less than 3 mm. In addition, the reduction in the size of apical radiolucencies was observed by radiographic examinations. This case report revealed that even type III des invaginatus with an open apex and large periapical lesion, can be treated non-surgically using MTA as an apical plug. Although this case report presents a favorable result, further studies with long term follow-up periods are encouraged to support the use of nonsurgical endodontic treatment for type III dens invaginatus. PMID:29225653

Ten-Year Follow-Up of a Fragment Reattachment to an Anterior Tooth: A Conservative Approach.

PubMed

Mendes, Luiz; Laxe, Laisa; Passos, Leandro

2017-01-01

This report describes the 10-year follow-up data of a patient who underwent fragment reattachment to the maxillary central incisor after coronal fracture with pulp exposure as well as the procedures followed for functional and esthetic adjustments. A 9-year-old female patient presented at the clinic of dentistry at the State University of Rio de Janeiro with a coronal fracture and pulp exposure of the right maxillary central incisor that had occurred immediately after an accident. The intact tooth fragment was recovered at the accident site and stored in milk. The treatment plan followed was to perform direct pulp capping and tooth fragment reattachment. When the patient was 14 years old, adhesion between fragment and remaining tooth was lost, and fragment reattachment was performed. Five years later, the same tooth presented clinical discoloration and absence of sensitivity during pulp vitality tests. Subsequently, a new treatment plan was formulated, which included endodontic treatment, followed by nonvital tooth bleaching and light-cured composite resin restoration. An esthetic and natural-looking restoration was achieved. Tooth fragment reattachment is not a temporary restorative technique and requires functional and esthetic adjustments over time to maintain the biomimetic characteristics of traumatized anterior teeth and predictable outcomes.

A normative study to evaluate inclination and angulation of teeth in North Indian population and comparision of expression of torque in preadjusted appliances

PubMed Central

Verma, Sanjeev; Singh, SP; Utreja, Ashok

2014-01-01

Aim: The aim of this study was to evaluate angulation and inclination of teeth from the study models of individuals with normal occlusion and evaluation of actual expression of torque expressed by three different bracket systems. Materials and Methods: In this study, the inclination and angulation were measured on 30 study models of North Indian individuals. A self-developed instrument (torque angle gauge) was used for the measurement. Fifteen study models were duplicated for the evaluation of torque expression in the bracket of three different manufacturers with different shape and size of bases. Results: The results give the mean, minimum and maximum, standard deviation of the normative data individually for each tooth. A significant correlation was noted in the angulation of maxillary canine and first premolar, and between premolars; and between mandibular central incisor with lateral incisor and canine, and between premolars. Conclusions: There was a highly significant correlation of teeth angulation and inclination in the maxillary and mandibular arch. Though the error in expression of torque was not significant, but it showed a large range, indicating the need to vary the position of brackets in different bracket systems for achieving optimum torque. PMID:25143932

Can insoluble polysaccharide concentration in dental plaque, sugar exposure and cariogenic microorganisms predict early childhood caries? A follow-up study.

PubMed

Parisotto, T M; Stipp, R; Rodrigues, L K A; Mattos-Graner, R O; Costa, L S; Nobre-Dos-Santos, M

2015-08-01

Insoluble polysaccharide (IP) has been associated with caries prevalence in young children. However, the power of IP to predict ECC needs to be demonstrated. To assess the relationships between early childhood caries (ECC) and extracellular insoluble polysaccharides (IP) in dental plaque, sugar exposure and cariogenic microorganisms. Visible plaque on maxillary incisors was recorded, followed by caries diagnosis in 65 preschoolers (3-4 years) at baseline and after 1 year. Plaque was collected for mutans streptococci (MS), total microorganism (TM) and lactobacilli (LB) enumerations in selective media, as well as for IP analysis, which was later assessed by colorimetry. Sugar/sucrose exposure was assessed by a diet chart. Positive correlations were found among the prevalence of caries and MS, TM, LB, solid sucrose and visible dental plaque. Additionally, children with IP concentrations in dental plaque higher than 2.36 μg/mg (odds ratio-OR=6.8), with visible plaque on maxillary incisors (OR=4.3), harbouring LB (OR=13) and exposed to solid sugar more than twice/day (OR=5) showed higher risk of developing caries (p<0.05). Extracellular insoluble polysaccharides, solid sugar/sucrose, visible dental plaque and cariogenic microorganisms could predict caries development, partially explaining the ECC pattern. Copyright © 2015 Elsevier Ltd. All rights reserved.

Prevalence of hypodontia in a sample of Sudanese orthodontic patients

PubMed Central

Hassan, Duaa Abdulrahman; Abuaffan, Amal H; Hashim, Hayder A

2014-01-01

Objective: The aims of this study were to determine the prevalence of hypodontia in the permanent dentition in a sample of Sudanese patients who sought orthodontic treatment and to compare the results with the reported findings of other populations. Materials and Methods: Orthodontic files including orthopantomographs of 1069 patients (760 females and 309 males - more than 8 years old) were examined and inspected for evidence of hypodontia. Results: The prevalence of hypodontia of the present sample was 5.1%. Hypodontia was found considerably more frequently in the mandible than in the maxilla. The distribution of missing teeth was noticed in the left side more than in the right side. The most frequently missing teeth were the maxillary lateral incisors, followed by the mandibular second premolars, maxillary second premolars and mandibular left lateral incisor. The majority of patients had two or three teeth missing, but rarely more than 5 teeth missing. Conclusions: The prevalence of hypodontia of this study was within the range of that reported in the literature. The incidence of hypodontia in the anterior segment requires great need for orthodontic and prosthodontic treatment. With early detection of hypodontia, alternative treatment modalities can be planned and performed with a multidisciplinary team approach restoring the esthetic and function. PMID:25143929

Clinical effectiveness of combining platelet rich fibrin with alloplastic bone substitute for the management of combined endodontic periodontal lesion

PubMed Central

2014-01-01

The term "endo-perio" lesion has been proposed to describe the destructive lesion resulting from inflammatory products found in varying degrees in both the periodontium and the pulpal tissues. In most of the cases, clinical symptoms disappear following successful endodontic therapy. However failure after conventional root canal treatment calls for surgical intervention. A 35 year old male patient with endo-perio lesion in right maxillary lateral incisor was treated with platelet rich fibrin (PRF) and alloplastic bone substitute after conventional endodontic therapy. At the end of 6 months there was gain in clinical attachment, increased radiographic bone fill and reduction in probing depth which was maintained till 18 month follow-up. Present case report aims to evaluate the efficacy of PRF and alloplastic bone substitute in the management of intrabony defect associated with endo-perio lesion in maxillary lateral incisor because the healing potential of PRF and bone graft has not been widely studied in endodontics. The use of PRF allows the clinician to optimize tissue remodelling, wound healing and angiogenesis by the local delivery of growth factors and proteins. The novel technique described here enables the clinician to be benefited from the full regenerative capacity of this autologous biologic material. PMID:24516830

Clinical effectiveness of combining platelet rich fibrin with alloplastic bone substitute for the management of combined endodontic periodontal lesion.

PubMed

Goyal, Lata

2014-02-01

The term "endo-perio" lesion has been proposed to describe the destructive lesion resulting from inflammatory products found in varying degrees in both the periodontium and the pulpal tissues. In most of the cases, clinical symptoms disappear following successful endodontic therapy. However failure after conventional root canal treatment calls for surgical intervention. A 35 year old male patient with endo-perio lesion in right maxillary lateral incisor was treated with platelet rich fibrin (PRF) and alloplastic bone substitute after conventional endodontic therapy. At the end of 6 months there was gain in clinical attachment, increased radiographic bone fill and reduction in probing depth which was maintained till 18 month follow-up. Present case report aims to evaluate the efficacy of PRF and alloplastic bone substitute in the management of intrabony defect associated with endo-perio lesion in maxillary lateral incisor because the healing potential of PRF and bone graft has not been widely studied in endodontics. The use of PRF allows the clinician to optimize tissue remodelling, wound healing and angiogenesis by the local delivery of growth factors and proteins. The novel technique described here enables the clinician to be benefited from the full regenerative capacity of this autologous biologic material.

Ten-Year Follow-Up of a Fragment Reattachment to an Anterior Tooth: A Conservative Approach

PubMed Central

Mendes, Luiz; Laxe, Laisa

2017-01-01

This report describes the 10-year follow-up data of a patient who underwent fragment reattachment to the maxillary central incisor after coronal fracture with pulp exposure as well as the procedures followed for functional and esthetic adjustments. A 9-year-old female patient presented at the clinic of dentistry at the State University of Rio de Janeiro with a coronal fracture and pulp exposure of the right maxillary central incisor that had occurred immediately after an accident. The intact tooth fragment was recovered at the accident site and stored in milk. The treatment plan followed was to perform direct pulp capping and tooth fragment reattachment. When the patient was 14 years old, adhesion between fragment and remaining tooth was lost, and fragment reattachment was performed. Five years later, the same tooth presented clinical discoloration and absence of sensitivity during pulp vitality tests. Subsequently, a new treatment plan was formulated, which included endodontic treatment, followed by nonvital tooth bleaching and light-cured composite resin restoration. An esthetic and natural-looking restoration was achieved. Tooth fragment reattachment is not a temporary restorative technique and requires functional and esthetic adjustments over time to maintain the biomimetic characteristics of traumatized anterior teeth and predictable outcomes. PMID:28740741

Ethnic variation of selected dental traits in Coorg

PubMed Central

Uthaman, Chancy; Sequeira, Peter Simon; Jain, Jithesh

2015-01-01

Purpose: In a country like India, in addition to the great innate diversity, there are distinct migrant populations with unique dental traits. Aim: To assess the distribution and degree of expression of cusp of Carabelli of maxillary first permanent molars and shoveling trait of maxillary central incisors, between three ethnic groups of Coorg, namely Kodavas, Tibetans, and Malayalees. Materials and Methods: A cross-sectional, indirect, anthropometric, study was carried out among 15- to 30-year-old subjects belonging to three different ethnic origins. A random sample consisting of 91 subjects were recruited for the study. The shovel trait of incisors and the Carabelli trait of molars were recorded according to the classification given by Hrdliƈka and Sousa et al., respectively. Statistical Analysis: The Kruskal-Wallis test was employed to determine the difference in three populations for shoveling and Carabelli traits. Mann-Whitney Test was used for pair-wise comparisons of three populations. Result: Of the total 91 subjects, 31 were Kodavas, 30 Malayalees and 30 Tibetans. There was a statistically significant difference in shoveling trait among the three ethnic groups. For Carabelli traits, there was no statistically significant difference among three ethnic groups. Conclusion: The present study findings showed that Tibetans have a higher degree of shoveling trait than the selected South Indian ethnic groups. PMID:26816457

Esthetic perception of maxillary lateral incisor agenesis treatment by canine mesialization.

PubMed

Mota, Antonino; Pinho, Teresa

2016-03-01

The objective of this study was to evaluate perception of the smile in maxillary lateral incisor agenesis (MLIA) cases treated by mesialization of a canine. Nine images were digitally modified from the same frontal intraoral photograph to simulate various treatment options for space closure in MLIA. A questionnaire was submitted to laypersons (303), general dentists (215), prosthodontists (55) and orthodontists (81). Statistical tests with a significance level of P<0.05 were used. The views of MLIA treatment judged to be most attractive showed unilateral dental and gingival reshaping. All study groups considered the simple dental reshaping of the mesial edge of the canine to be attractive. In the analysis of the images grouped together for both unilateral and bilateral MLIA, the view showing dental and gingival reshaping was considered the most attractive whereas unmodified mesialization was considered the least attractive. Regarding the space closure treatments, although all groups regarded simple dental reshaping of the canine to be attractive, the dental professionals considered gingival and crown reshaping to be more esthetic. In contrast, laypersons were not significantly responsive to this dental and gingival modification as compared to only slight reshaping of the mesial edge of the cusp of the mesialized canine in MLIA. Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.

[Finite element study of maxillary Le Fort-I osteotomy with rigid internal fixation].

PubMed

Zhou, Jian; Sun, Geng-Lin; Wu, Wei; Xu, Chong-Tao; Wang, Peng-Lin

2010-05-01

To study the biomechanical characteristic of maxillary Le fort- I osteotomy with rigid internal fixation (RIF) , so as to choose best fixation method. The 3-dimensional finite element models of maxillary Le Fort-I osteotomy with 9 kinds of RIF methods were established. Then the models were divided into three groups to calculate the stress distribution of the maxilla and the displacement of bone segment under 3 kinds of occlusion condition. The fixation stability of the different RIF methods was evaluated. Under the incisor occlusion condition, the stress of the cranio maxillary complex transmits mainly along the nasal-maxillary buttress. Under the premolar and molar occlusion condition, the stress transmits along the alveolar process first, then turns to the nasal-maxillary and zygomatic-maxillary buttress. The focused stress position of the internal fixation system is at the connection between the screws and the plate and at the plate near the osteotomy line. Under the premolar occlusion condition, the displacement of bone segment with different RIF methods was (in a decreasing order) 0.396509 mm (with bio-absorbable plate), 0.148393 mm (with micro-plate ), 0.078436 mm (with mini-plate) in group 1; 0.188791 mm (fixing at the nasal-maxillary buttress), 0.121718 mm (fixing at the zygomatic-maxillary buttress), 0.078436 mm (fixing at the both buttress) in group 2; 0.091023 mm (with straight plate), 0.078436 mm (with L shape plate), 0.072450 mm (with Y shape plate), 0.065617 mm (with T shape plate) in group 3. The fixation stability of using the bio-absorbable plate in Le Fort-I osteotomy is less stable than using the titanium plate. Fixing at the zygomatic-maxillary buttress is more stable than at the naso-maxillary buttress. The fixation stability is different by using different shapes of plates.

Changes consequent to maxillary molar distalization with the bone-anchored pendulum appliance.

PubMed

Cambiano, Aldo Otazú; Janson, Guilherme; Fuziy, Acácio; Garib, Daniela Gamba; Lorenzoni, Diego Coelho

2017-01-01

This retrospective study aimed to evaluate the dentoalveolar, skeletal, and soft tissue effects obtained with bone-anchored pendulum appliance in patients with Class II malocclusion. A total of 18 patients (4 male, 14 female) at a mean pretreatment age of 14.0 years (+1.08) were enrolled in this study. All patients were treated with the bone-anchored pendulum appliance for an average duration of 4.8 months. Only the active distalization period was evaluated with predistalization and postdistalization lateral cephalograms. Skeletal, dentoalveolar, and soft tissue variables were obtained. Based on these variables, the treatment effects were evaluated with dependent t -test. Correction of Class II molar relationship resulted from distal movement of 3.45 mm and tipping of 11.24° of the first maxillary molars. The premolars were distalized accompanying the molars. The bone-anchored pendulum appliance proved to be an effective method for distalization of maxillary molars in cases that require maximum anchorage, avoiding reciprocal mesial movement of premolars and incisors.

European college of orthodontics: commission of affiliation and titularisation.

PubMed

Muller, Christine

2012-06-01

Date of birth: 28/4/1977; sex: female. A. (4/2006; 29 years). Tooth-arch discrepancy with bi-maxillary protrusion. Correction of bi-maxillary protrusion; avulsion of 15, 25, 35 and 45; fixed multi-bracket Incognito bi-maxillary appliance; mini-screw anchorage. B. POST-TREATMENT RECORDS DOCUMENTS: (9/2009; 32 years and 6 months). Permanent retainers using fixed upper and lower bonded wires. C. POST-RETENTION RECORDS: (7/2010; 33 years and 3 months). D. Reason for consultation: correction of crooked and "jutting" teeth. Extraoral examination: balanced facial levels; lateral view: predominant lower third; closed nasolabial angle; labial asymmetry with predominant lower lips. Endooral examination: young adult dentition; average dental status; large number of fillings; panorex confirms four devitalized teeth; good periodontal status; V-shaped upper arch with lingually ectopic 12 and 22; lower arch with slight incisor crowding; bi-lateral molar and canine Class I; crossbite of 12 and 22; 2-mm deepbite and 1-mm overjet. Copyright © 2012. Published by Elsevier Masson SAS.

Clinical attachment level gain and three-year maintenance of a maxillary incisor with 100% bone loss: A case report.

PubMed

Tirone, Federico; Salzano, Stefano

2016-01-01

This case report discusses a patient suffering from chronic periodontal disease and diagnosed with a hopeless central incisor. The intention was to show the possibility of gaining new clinical attachment via regenerative surgery in a tooth with 100% bone loss around the root. Treatment of hopeless and questionable teeth in periodontal patients has become an ideological matter. On the one hand, dental implants have proved to be a reliable solution to replace lost teeth; on the other hand, newly emerging evidence suggests that successful periodontal treatment of teeth diagnosed as hopeless is possible. Here we describe surgical, orthodontic, and restorative treatments that led to clinical attachment gain and achieved clinical success over a three-year follow-up period.

Comparative evaluation of molar distalization therapy using pendulum and distal screw appliances

PubMed Central

Cafagna, Alessandra; Fontana, Mattia; Cozzani, Mauro

2015-01-01

Objective To compare dentoalveolar and skeletal changes produced by the pendulum appliance (PA) and the distal screw appliance (DS) in Class II patients. Methods Forty-three patients (19 men, 24 women) with Class II malocclusion were retrospectively selected for the study. Twenty-four patients (mean age, 12.2 ± 1.5 years) were treated with the PA, and 19 patients (mean age, 11.3 ± 1.9 years) were treated with the DS. The mean distalization time was 7 months for the PA group and 9 months for the DS group. Lateral cephalograms were obtained at T1, before treatment, and at T2, the end of distalization. A Mann-Whitney U test was used for statistical comparisons of the two groups between T1 and T2. Results PA and DS were equally effective in distalizing maxillary molars (4.7 mm and 4.2 mm, respectively) between T1 and T2; however, the maxillary first molars showed less distal tipping in the DS group than in the PA group (3.2° vs. 9.0°, respectively). Moreover, significant premolar anchorage loss (2.7 mm) and incisor proclination (5.0°) were noted in the PA group, whereas premolar distal movement (1.9 mm) and no significant changes at the incisor (0.1°) were observed in the DS group. No significant sagittal or vertical skeletal changes were detected between the two groups during the distalization phase. Conclusions PA and DS seem to be equally effective in distalizing maxillary molars; however, greater distal molar tipping and premolar anchorage loss can be expected using PA. PMID:26258063

Alterations of papilla dimensions after orthodontic closure of the maxillary midline diastema: a retrospective longitudinal study

PubMed Central

2016-01-01

Purpose The aim of this study was to evaluate alterations of papilla dimensions after orthodontic closure of the diastema between maxillary central incisors. Methods Sixty patients who had a visible diastema between maxillary central incisors that had been closed by orthodontic approximation were selected for this study. Various papilla dimensions were assessed on clinical photographs and study models before the orthodontic treatment and at the follow-up examination after closure of the diastema. Influences of the variables assessed before orthodontic treatment on the alterations of papilla height (PH) and papilla base thickness (PBT) were evaluated by univariate regression analysis. To analyze potential influences of the 3-dimensional papilla dimensions before orthodontic treatment on the alterations of PH and PBT, a multiple regression model was formulated including the 3-dimensional papilla dimensions as predictor variables. Results On average, PH decreased by 0.80 mm and PBT increased after orthodontic closure of the diastema (P<0.01). Univariate regression analysis revealed that the PH (P=0.002) and PBT (P=0.047) before orthodontic treatment influenced the alteration of PH. With respect to the alteration of PBT, the diastema width (P=0.045) and PBT (P=0.000) were found to be influential factors. PBT before the orthodontic treatment significantly influenced the alteration of PBT in the multiple regression model. Conclusions PH decreased but PBT increased after orthodontic closure of the diastema. The papilla dimensions before orthodontic treatment influenced the alterations of PH and PBT after closure of the diastema. The PBT increased more when the diastema width before the orthodontic treatment was larger. PMID:27382507

Interrelationships in the Variability of Root Canal Anatomy among the Permanent Teeth: A Full-Mouth Approach by Cone-Beam CT

PubMed Central

Peters, Ove A.; Maury, Elisabeth; Telmon, Norbert; Georgelin-Gurgel, Marie; Maret, Delphine

2016-01-01

Objectives In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The aim of this study was to assess using CBCT acquisitions regarding whether one root canal anatomy of a tooth is associated with a specific anatomy of another tooth. Methods A total of 106 CBCT acquisitions were obtained using a CBCT scanner with 200μm voxel size. Numbers of roots and canals of the entire dentition were described. Bivariate analyses and logistic regressions were conducted to explore root canal anatomy on one tooth according to age, gender, jaw, side and the others teeth. Multiple correspondence analysis (MCA) was performed to correlate the different numbers of canals profiles. Results A total of 2424 teeth were analyzed. Independently from the other variables, the presence of an additional root canal on a mandibular incisor increases the risk of having an additional root canal on a mandibular premolar (OR [95%] 3.7 [1.0;13.2]). The mandibular molar variability increases in women compared to men (OR [95%] 0.4 [0.1; 0.9]). MCA showed correspondence between 2-canals maxillary incisor and canines and 5-canals maxillary molars, and some correlation between additional canal on maxillary and mandibular premolars. Conclusions Although CBCT examinations are conducted in the first intention of making a diagnosis or prognostic evaluation, medium FOV acquisitions could be used as an initial database thus furnishing preliminary evaluations and information. In endodontic practice, clinicians should be aware of possible root canal anatomic variations. The visualization of all canals is considered essential in endodontic therapy. The use of multi-correspondence analysis for statistics in endodontic research is a new approach as a prognostic tool. PMID:27764246

[The statistical analysis for the use of the 55,787 finished resin teeth].

PubMed

Wu, Shu-hong; Yu, Hai-yang; Wang, Lu; Xu, Ling; Xiao, Zhi-li

2010-08-01

To analyze the use situation of finished resin teeth for the different location, and to provide reference for manufacturers of finished resin teeth and all the buyers. To analyze the use situation of finished resin teeth in the Dental Laboratory of the Affiliated Hospital of Stomatology of Chongqing Medical University from January 2006 to December 2008 by using statistic methods. During the use of 55,787 finished resin teeth, the study found some rules. (1) The top use of finished resin teeth was D6 with the percentage of 5.31%, and the lowest use of finished resin teeth was D3 with the percentage of 1.94%. (2) Except the maxillary canines and the mandibular lateral incisors, there was no significant difference between the usage of other same name finished resin teeth (P > 0.05). (3) Among all finished resin teeth, the usage of section B exceeded section A, and the usage of maxillary finished resin teeth exceeded mandibular finished resin teeth (P < 0.05). (4) The use of the complete denture and single complete denture was about 1/3 of the total usage of finished resin teeth. (5) Except the use situation of complete denture and single complete denture, the frequency of simultaneously using mandibular left and right central incisors was the most with the percentage of 81.46%, for the frequency of simultaneously using maxillary left and right canines was 43.26% of the total, which was the lowest. There is significant difference in the use frequency of finished resin teeth for different location. For such reason, the manufacturers should produce finished resin teeth pro rata as well as the buyers for their purchase.

Rehabilitative treatment of cleft lip and palate: experience of the Hospital for Rehabilitation of Craniofacial Anomalies - USP (HRAC-USP) - Part 2: Pediatric Dentistry and Orthodontics

PubMed Central

FREITAS, José Alberto de Souza; GARIB, Daniela Gamba; OLIVEIRA, Thais Marchini; LAURIS, Rita de Cássia Moura Carvalho; de ALMEIDA, Ana Lúcia Pompéia Fraga; NEVES, Lucimara Teixeira; TRINDADE-SUEDAM, Ivy Kiemle; YAEDÚ, Renato Yassutaka Faria; SOARES, Simone; PINTO, João Henrique Nogueira

2012-01-01

The aim of this article is to present the pediatric dentistry and orthodontic treatment protocol of rehabilitation of cleft lip and palate patients performed at the Hospital for Rehabilitation of Craniofacial Anomalies - University of São Paulo (HRAC-USP). Pediatric dentistry provides oral health information and should be able to follow the child with cleft lip and palate since the first months of life until establishment of the mixed dentition, craniofacial growth and dentition development. Orthodontic intervention starts in the mixed dentition, at 8-9 years of age, for preparing the maxillary arch for secondary bone graft procedure (SBGP). At this stage, rapid maxillary expansion is performed and a fixed palatal retainer is delivered before SBGP. When the permanent dentition is completed, comprehensive orthodontic treatment is initiated aiming tooth alignment and space closure. Maxillary permanent canines are commonly moved mesially in order to substitute absent maxillary lateral incisors. Patients with complete cleft lip and palate and poor midface growth will require orthognatic surgery for reaching adequate anteroposterior interarch relationship and good facial esthetics. PMID:22666849

[Maxillary cementoblastoma. A case report].

PubMed

Slimani, F; Elbouihi, M; Oukerroum, A; Lazreqh, H; Mahtar, M; Karkouri, M; Abdelouafi, A; Benjelloun, A; Chekkoury-Idrissi, A

2009-01-01

Cementoblastoma is a rare benign odontogenic neoplasm. Its cause is unknown. It represents less 6 % of all odontogenic tumors. The aim of our work is to present a rare case of maxillary cementoblastoma involving an included central incisor. A 32-year old man consulted for a left maxillary swelling to projection under nostril. A panoramic radiographic examination revealed an included tooth 21 with a radiopaque lesion around its root. The computed tomography revealed the included tooth 21 with a process around its root. This process is well-defined, high-dense and is surrounded by a radiolucent halo. The treatment should consist of complete removal of the lesion with the tooth 21. Histological examination concluded to the diagnosis of a cementoblastoma. The cementoblastoma occurs most frequently in young persons and predominantly among men. The mandibular premolar and molar are the more frequently reached. The maxillary localization remains rare. This tumor occurs around the roots of the posterior and lower teeth. Radiographically, the lesion is well-defined and attached to the root of the tooth, radiopaque dense and surrounded by a radiolucent halo. The cementoblastoma evolves slowly and has the tendency to blow the cortical. The prognosis is good.

Nonsurgical periodontal therapy to treat a case of severe periodontitis: A 12-year follow-up.

PubMed

Carnio, João; Moreira, Ana Karina; Jenny, Todd; Camargo, Paulo M; Pirih, Flavia Q

2015-08-01

This case report describes the successful treatment of a severe chronic periodontitis case by nonsurgical therapy and a strict maintenance program over a 12-year period. A 38-year-old man concerned about the protrusion of his maxillary incisors was referred for periodontal treatment. The teeth in the maxillary arch had generalized severe chronic periodontitis. Several treatment options were presented to the patient including the most aggressive, extraction of all maxillary teeth, and the most conservative, scaling and root planing. The patient opted to having the most conservative approach, even though the prognoses for the maxillary teeth were unfavorable. Therefore, he received nonsurgical therapy via scaling and root planing combined with systemic antibiotics before referral to an orthodontist to address the esthetic concerns. The maxillary dentition was treated with orthodontic therapy to retract and align the maxillary anterior segment. Periodontal maintenance (1-hour session), including subgingival instrumentation, was performed 4 times per year until the end of the 12-year follow-up period. The patient only missed 2 appointments in 12 years. Twelve years later, the results revealed that all but 1 maxillary tooth were maintained in a state of acceptable health, function, and esthetics. Although most would agree with the initial poor prognosis of this patient's case, nonsurgical periodontal therapy was utilized with a 3-month periodontal maintenance program and demonstrated long-term success. The outcome presented in this case report may only have been possible because of patient compliance, professional experience, skill, and supervision throughout the course of treatment. Copyright © 2015 American Dental Association. Published by Elsevier Inc. All rights reserved.

Effectiveness of TAD-anchored maxillary protraction in late mixed dentition.

PubMed

Feng, Xiaoxia; Li, Jianhua; Li, Yu; Zhao, Zhihe; Zhao, Sen; Wang, Jue

2012-11-01

To evaluate the effectiveness of temporary anchorage device (TAD)-anchored maxillary protraction (MP) in terms of the skeletal and dentoalveolar changes and to compare it with traditional tooth-anchored MP. A computerized literature search for relative randomized controlled trials and prospective controlled trials was performed in PubMed, MEDLINE, Cochrane Central Register of Controlled Trials, Embase, CNKI, and Google Scholar, complemented with manual search. Data extraction and quality assessment were carried out by two reviewers independently. Meta-analysis was followed when possible; otherwise, description was done. Forty articles were found, among which four trials were qualified for meta-analysis. The results showed that there was significant difference between TAD-anchored MP and untreated control in terms of maxillary advancement (weighted mean differences (WMD) 3.08 mm; 95% CI: 1.61 to approximately 4.56; P < .0001), but there were no consistent points in terms of mandibular rotation. Also, there were significant differences between both treatment patterns regarding maxillary advancement (WMD 1.41 mm; 95% CI: 0.47 to approximately 2.35; P  =  .003), mandibular rotation (WMD -1.39°, 95% CI: -2.47 to approximately -0.31; P  =  .01), proclination of maxillary incisors (WMD -2.29°; 95% CI: -4.41 to approximately -0.17; P  =  .03), and extrusion of maxillary molars (WMD -1.68 mm; 95% CI: -2.51 to approximately -0.85; P < .0001). According to the present results, TAD-anchored MP might have a greater maxillary advancement effect and might reduce skeletal and dental side effects, compared with tooth-anchored MP.

Evaluation of efficacy of a pulse oximeter to assess pulp vitality.

PubMed

Sadique, Mohammed; Ravi, S V; Thomas, Kunjamma; Dhanapal, Prasanth; Simon, Elsy P; Shaheen, Mohammed

2014-06-01

To evaluate the efficacy of pulse oximeter as a pulp vitality tester. The sample group consisted of 60 patients of age 15 to 30 years with normal maxillary anterior teeth. Thirty nonvital teeth with complete endodontic fillings were tested as control group. Systemic oxygen saturation values from the patient's fingers served as the control sample for comparison of pulp oxygen saturation values. Readings were recorded on index fingers first; teeth were then evaluated by placing sensor onto the tooth. Nonvital teeth recorded oxygen saturation values of 0%. The mean value for central incisor was 85.11 (SD ± 2.07), for lateral incisors 80.21 (SD ± 2.03) and for canines 89.55 (SD ± 1.09). Their control values (patient's index fingers) averaged 95.88% (SD ± 0.66). Pearson's correlation analysis showed a correlation of 0.11 for central incisors, 0.19 for lateral incisors and 0.12 for canines. This study confirms that pulse oximeter is effective equipment for pulp vitality testing. Pulse oximeter evidences the actual method of evaluating the pulp vitality compared to contemporary methods. How to cite the article: Sadique M, Ravi SV, Thomas K, Dhanapal P, Simon EP, Shaheen M. Evaluation of efficacy of a pulse oximeter to assess pulp vitality. J Int Oral Health 2014;6(3):70-2.

Comparison of the effects of mini-implant and traditional anchorage on patients with maxillary dentoalveolar protrusion.

PubMed

Xu, Yanhua; Xie, Jiye

2017-03-01

To compare the treatment effects of mini-implants as anchor units with conventional methods of anchorage reinforcement in maxillary dentoalveolar protrusion patients in terms of skeletal, dental, and soft tissue changes. We searched the databases of the Cochrane Library, PubMed, OVIDSP, CBM, VIP, WanFang Data, and CNKI covering December 1966 to March 2016 for randomized controlled trials (RCTs) and clinical controlled trials that compared the treatment effects of mini-implants with conventional anchorage reinforcement in maxillary dentoalveolar protrusion patients. Literature filtering, data extraction, and methodological quality evaluation were finished independently by two researchers and disagreements were solved by discussion. Meta-analysis was performed when possible; otherwise descriptive assessment was done. Through a predefined search strategy, we finally included 14 eligible studies. Eight outcomes were evaluated in this study: maxillary incisor retraction, maxillary molar movement, U1-SN, SNA, SN-MP, UL-E Plane, NLA and G-Sn-Pg. Mini-implant anchorage was more effective in retracting the anterior teeth, produced less anchorage loss, and had a greater effect on SN-MP for the high-angle patients than did traditional anchorage. Both mini-implants and traditional anchorage underwent decreases in on U1-SN and SNA. More qualified RCTs are required to make reliable recommendations about the anchorage capacity of mini-implant and traditional anchorage in patients with maxillary dentoalveolar protrusion, especially on the UL-E plane, NLA, and G-Sn-Pg.

Replacement of a hopeless maxillary central incisor: a technique for the fabrication of an immediate implant-supported interim restoration.

PubMed

Graiff, Lorenzo; Vigolo, Paolo

2012-04-01

Placement of a dental implant and an interim restoration in the esthetic zone immediately following tooth extraction is now a common procedure. However, in such clinical situations, the fabrication of an appropriate interim restoration may be challenging. The aim of this article is to present a technique for modifying the extracted tooth so it can be used as an implant-supported interim restoration.

Combined endodontic-periodontic treatment of a palatal groove: a case report.

PubMed

Schwartz, Scott A; Koch, Michael A; Deas, David E; Powell, Charles A

2006-06-01

The palatal groove is a developmental anomaly that predisposes the tooth involved to a severe periodontal defect. When further complicated by pulp necrosis, these grooves often present a diagnostic and treatment planning challenge that requires an interdisciplinary treatment approach. This case report describes the successful collaborative management of a maxillary lateral incisor with an extensive palatal groove using a combination of nonsurgical endodontic therapy, odontoplasty, and periodontal regenerative techniques.

A cephalometric comparative study of class II correction with Sabbagh Universal Spring (SUS2) and Forsus FRD appliances

PubMed Central

Oztoprak, Mehmet Oguz; Nalbantgil, Didem; Uyanlar, Ayhan; Arun, Tulin

2012-01-01

Objective The purpose of this clinical prospective study was to compare the dentofacial changes produced by the Sabbagh Universal Spring (SUS2) and Forsus FRD appliances in late adolescent patients with Class II malocclusion, and quantify them in comparison with an untreated group. Method: The study was carried out on 59 patients with skeletal and dental Class II malocclusion due to retrognatic mandible. Among these, 20 were treated with SUS2, 20 were treated with FRD, and no treatment was done to 19 subjects as the control group. 36 cephalometric landmarks were identified on each lateral cephalometric radiograph. Results: The effects of both appliances were dentoalveolar and no significant vertical and sagittal skeletal effect on maxilla and mandible was achieved. The retrusion and extrusion of the maxillary incisors as well as the protrusion and intrusion of mandibular incisors were found to be statistically significant in both treatment groups. Soft tissue profile improvement was limited in both treatment groups. Conclusions: Both appliances corrected Class II discrepancies through dentoalveolar changes; however lower incisor proclination was more prominent with the Forsus FRD. PMID:22904659

A cephalometric comparative study of class II correction with Sabbagh Universal Spring (SUS(2)) and Forsus FRD appliances.

PubMed

Oztoprak, Mehmet Oguz; Nalbantgil, Didem; Uyanlar, Ayhan; Arun, Tulin

2012-07-01

The purpose of this clinical prospective study was to compare the dentofacial changes produced by the Sabbagh Universal Spring (SUS(2)) and Forsus FRD appliances in late adolescent patients with Class II malocclusion, and quantify them in comparison with an untreated group. The study was carried out on 59 patients with skeletal and dental Class II malocclusion due to retrognatic mandible. Among these, 20 were treated with SUS(2), 20 were treated with FRD, and no treatment was done to 19 subjects as the control group. 36 cephalometric landmarks were identified on each lateral cephalometric radiograph. The effects of both appliances were dentoalveolar and no significant vertical and sagittal skeletal effect on maxilla and mandible was achieved. The retrusion and extrusion of the maxillary incisors as well as the protrusion and intrusion of mandibular incisors were found to be statistically significant in both treatment groups. Soft tissue profile improvement was limited in both treatment groups. Both appliances corrected Class II discrepancies through dentoalveolar changes; however lower incisor proclination was more prominent with the Forsus FRD.

Using implants for prosthodontic rehabilitation of a 4-year-old with ectodermal dysplasia.

PubMed

Toomarian, Lida; Ardakani, Mohammad Reza Talebi; Ramezani, Jamileh; Adli, Amin Rezaei; Tabari, Zahra Alizadeh

2014-01-01

Ectodermal dysplasia (ED) is an inherited disorder that affects ectodermally derived organs, such as teeth. Pathogenesis is thought to involve an altered epithelium-mesenchymal interaction. ED patients have oligodontia (or sometimes anodontia) in addition to other abnormalities involving the skin, sweat glands, or hair. Many different subtypes have been introduced in the literature. This article describes the case of a 4-year-old patient who, after being diagnosed with ED, was put on a treatment plan that involved mandibular implants, reshaping of the maxillary primary central incisors, and prosthetic dental rehabilitation. Due to the child's rapid growth, both dentures were changed 9 months post-treatment. Two years post-treatment, the maxillary denture was changed again and the child was placed under close supervision.

Esthetic enhancement of a traumatized anterior tooth with a combination of forced eruption and tooth alignment: a case report

PubMed Central

Kang, So-Hee; Jin, Myoung-Uk; Kim, Sung-Kyo

2016-01-01

Exposing sound structure of a subgingivally fractured tooth using orthodontic extrusion is considered to be a conservative way to re-establish biologic width without sacrificing esthetics or jeopardizing periodontal support of neighboring teeth. When a misaligned tooth is traumatically involved, a more comprehensive approach combining tooth extrusion and re-alignment may be necessary for a successful restorative outcome. This case report describes a successful esthetic management of a patient with complicated crown-root fracture on the maxillary right central incisor and pre-existing malocclusion in the maxillary anterior region. Forced eruption along with re-alignment of teeth by orthodontic movement seems to allow re-positioning of the fracture line to a favorable position and correction of crowding, providing a better esthetic result. PMID:27508163

[Three-dimensional finite element analysis of maxillary anterior teeth retraction force system in light wire technique].

PubMed

Zhang, Xiangfeng; Wang, Chao; Xia, Xi; Deng, Feng; Zhang, Yi

2015-06-01

This study aims to construct a three-dimensional finite element model of a maxillary anterior teeth retraction force system in light wire technique and to investigate the difference of hydrostatic pressure and initial displacement of upper anterior teeth under different torque values of tip back bend. A geometric three-dimensional model of the maxillary bone, including all the upper teeth, was achieved via CT scan. To construct the force model system, lingual brackets and wire were constructed by using the Solidworks. Brackets software, and wire were assembled to the teeth. ANASYS was used to calculate the hydrostatic pressure and the initial displacement of maxillary anterior teeth under different tip-back bend moments of 15, 30, 45, 60, and 75 Nmm when the class II elastic force was 0.556 N. Hydrostatic pressure was concentrated in the root apices and cervical margin of upper anterior teeth. Distal tipping and relative intrusive displacement were observed. The hydrostatic pressure and initial displacement of upper canine were greater than in the central and lateral incisors. This hydrostatic pressure and initial intrusive displacement increased with an increase in tip-back bend moment. Lingual retraction force system of maxillary anterior teeth in light wire technique can be applied safely and controllably. The type and quantity of teeth movement can be controlled by the alteration of tip-back bend moment.

Skeletal and dental effects of rapid maxillary expansion assessed through three-dimensional imaging: A multicenter study.

PubMed

Luebbert, Joshua; Ghoneima, Ahmed; Lagravère, Manuel O

2016-03-01

The aim of this study was to determine the skeletal and dental changes in rapid maxillary expansion treatments in two different populations assessed through cone-beam computer tomography (CBCT). Twenty-one patients from Edmonton, Canada and 16 patients from Cairo, Egypt with maxillary transverse deficiency (11-17 years old) were treated with a tooth-borne maxillary expander (Hyrax). CBCTs were obtained from each patient at two time points (initial T1 and at removal of appliance at 3-6 months T2). CBCTs were analyzed using AVIZO software and landmarks were placed on skeletal and dental anatomical structures on the cranial base, maxilla and mandible. Descriptive statistics, intraclass correlation coefficients and one-way ANOVA analysis were used to determine if there were skeletal and dental changes and if these changes were statistically different between both populations. Descriptive statistics show that dental changes were larger than skeletal changes for both populations. Skeletal and dental changes between populations were not statistically different (P<0.05) from each other with the exception of the upper incisor proclination being larger in the Indiana group (P>0.05). Rapid maxillary expansion treatments in different populations demonstrate similar skeletal and dental changes. These changes are greater on the dental structures compared to the skeletal ones in a 4:1 ratio. Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.

Assessment of dynamic smile and gingival contour in young Chinese people.

PubMed

Zhang, Yan-Ling; Le, Di; Hu, Wen-Jie; Zhang, Hao; Liang, Ling-Zhi; Chung, Kwok-Hung; Cao, Zhan-Qiang

2015-08-01

This study aimed to classify the dynamic smile and to quantify the gingival line (GL), as well as apico-coronal displacement of the gingival zenith (GZ), in the maxillary anterior dentition in a young Chinese population. Two-hundred young Chinese subjects (100 men and 100 women; 20-35 years of age) with healthy dentogingival tissue were recruited. The dynamic smile process was captured using a digital camera. The smile type, GL type, the vertical distance of the GZ between the canine and the central incisor on the same side and the GZ of the lateral incisor-GL relationship were measured using a self-developed smile-analysis method. The kappa statistics was used to examine the reliability of the data recorded by the rater. The Pearson chi-square test was used to analyse the differences between subjects regarding the frequencies of smile type and GL type at α = 0.05. Data revealed that 45.5% of subjects had a high smile and 45.5% had an average smile; 58.2% of the subjects presented an upwards GL. The GZ of canine teeth was 0.33 mm apical to the corresponding central incisor and no significant difference between both sides of the GZ was observed. The GZ of the lateral incisor was located coronal to the GL in 87.9% of samples. The vertical distance between the GZ of the lateral incisor and the GL was 0.59 mm and no statistically significant difference was detected. The most common findings were a high or average smile type, combined with an upward GL. In the majority of subjects, the GZ of the lateral incisor is coronal to the GL. The apico-coronal displacement of the GZ showed bilateral symmetry. © 2015 FDI World Dental Federation.

Oxygen saturation in the dental pulp of permanent teeth: a critical review.

PubMed

Bruno, Kely Firmino; Barletta, Fernando Branco; Felippe, Wilson Tadeu; Silva, Júlio Almeida; Gonçalves de Alencar, Ana Helena; Estrela, Carlos

2014-08-01

Pulse oximetry is a noninvasive method for assessing vascular health based on oxygen saturation level. The method has recently also been used to assess dental pulp vitality, but a median oxygen saturation level suggestive of normal pulp physiology has not been determined. The objective of this study was to make a critical analysis of the published research to establish the median oxygen saturation for the diagnosis of normal dental pulps in maxillary anterior permanent teeth using pulse oximetry. Studies reporting on the use of pulse oximeters to determine oxygen saturation in dental pulps were retrieved using the MEDLINE, Scientific Electronic Library Online, and Cochrane Central Register of Controlled Trials databases plus a manual search of relevant references cited by selected articles. Different combinations of the terms "oximetry," "oximeter," "pulp," "dental," and "dentistry" were used in the search. Statistical analysis was performed for each group of teeth (central incisors, lateral incisors, and canines) using R statistical software (US EPA ORD NHEERL, Corvallis, OR) and a random effects model (P < .0001) with an I(2) of 99%. Of the 295 articles found, only 6 met the inclusion criteria (472 teeth). Of these, the number of articles included in each analysis (according to tooth group) was as follows: all 6 studies (288 teeth) for central incisors at a median oxygen saturation of 87.73%, 3 studies (90 teeth) for lateral incisors at a median oxygen saturation of 87.24%, and 4 studies (94 teeth) for canines at a median oxygen saturation of 87.26%. The median oxygen saturation in normal dental pulps of permanent central incisors, lateral incisors, and canines was higher than 87%. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Analysis of the golden proportion and width/height ratios of maxillary anterior teeth in Arab and Kurdish populations.

PubMed

Al-Kaisy, Neda; Garib, Balkees Taha

2017-11-15

Dentists providing anterior restorations are guided by the principles of anatomic tooth dimension. Dental biometrics should consider ethnicity to produce a more comprehensive evaluation. The purpose of this clinical study was to analyze the anatomic crowns of maxillary central incisors (CI), lateral incisors (LI), and canines (C) with respect to the golden proportion (GP) and width/height (W/H) ratio in Kurdish and Arab populations. Maxillary gypsum casts were obtained from 100 participants (50 from a Kurdish and 50 from an Arab population). Standardized digital photographs of each cast were recorded. The apparent and actual anterior tooth dimensions were determined by ImageJ software for the calculation of the GP and W/H ratio. Data were statistically analyzed using ANOVA to investigate ethnic, sex, and arch side differences. The chi-square test was used to explore the GP, and the 1-sample t test was used to test the ideal W/H ratio (α=.05). The GP was found in both the Kurdish and Arab groups in the LI/CI mean (0.62, 0.63), but not in the C/LI mean (0.69, 0.73). No difference due to sex was detected in the LI/CI in either ethnic group, but Kurdish men had significantly larger C/LI than women (0.73, 0.66, P=.006) and larger right-side LI/CI than left (0.63, 0.60, P=.049). The W/H ratio was higher than the predicted ideal ratio of 80% (range, 88% to 90%). The LI W/H ratio in Arabs was significantly larger than in Kurds (90.3% versus 82.7%, respectively; P<.001). The GP was found to exist between the apparent widths of maxillary anterior teeth LI/CI for the both populations in both men and women but not for C/LI. No ideal ratio was detected for the W/H ratios. Specific population characteristics must be taken into consideration, especially when applying the proportions to Kurdish individuals. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Maxillary Interdental Osteotomies Have Low Morbidity for Alveolar Crestal Bone and Adjacent Teeth: A Cone Beam Computed Tomography-Based Study.

PubMed

Rodrigues, Daniel B; Campos, Paulo S F; Wolford, Larry M; Ignácio, Jaqueline; Gonçalves, João R

2018-02-19

Maxillary segmentation involving interdental osteotomies can have an adverse effect on the interdental crestal bone and adjacent teeth. The purpose of the present study was to evaluate the effect of interdental osteotomies on surrounding osseous and dental structures, including adjacent teeth, using cone beam computed tomography (CBCT), in patients who underwent segmental maxillary osteotomies. The present retrospective cohort study evaluated interdental osteotomy (IDO) sites between the lateral incisors and canines in patients treated with 3-piece Le Fort I osteotomies. CBCT scans were assessed using Kodac Dental Imaging software at specific intervals: T0 (before surgery), T1 (immediately after surgery), and T2 (a minimum of 11 months after surgery). The statistical analysis using a linear regression model was adjusted to compare the variables at the different intervals. Injury to the dental structures was assessed by radiological evidence of dental damage, the requirement for endodontic treatment, or tooth loss. We evaluated 94 IDO sites in 47 patients in the present study. The mean inter-radicular distance at T0 was 2.5 mm. A statistically significant increase was seen in the inter-radicular distance (between T1 and T0) of 0.72 mm, with a reduction of the alveolar bone crest height (between T2 and T0) of 0.19 mm (P < .001) for the group that underwent IDO. A weak correlation was found for this increase in the inter-radicular distance, with changes in the alveolar crest bone height. The potential complications associated with interdental osteotomies such as iatrogenic damage to the tooth structure, the need for endodontic treatment, and tooth loss were not encountered in any patients. We found very low morbidity for the interdental alveolar crest and the integrity of teeth adjacent to interdental osteotomies for patients who underwent maxillary segmentation between the lateral incisors and canines. Copyright © 2018 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Orthodontic treatment of an unerupted mandibular canine tooth in a patient with mixed dentition: a case report.

PubMed

Dinoi, Maria Teresa; Marchetti, Enrico; Garagiola, Umberto; Caruso, Silvia; Mummolo, Stefano; Marzo, Giuseppe

2016-06-10

The aim of this case report was to describe the surgical-orthodontic treatment of an unerupted mandibular canine tooth in a 9-year-old girl. A 9-year-old white girl presented with an unerupted right mandibular canine tooth. Combined surgical-orthodontic treatment was performed to correct dental impaction and to achieve good aesthetic and functional results. Orthodontic treatment achieved all of the required objectives.

Integrating a facial scan, virtual smile design, and 3D virtual patient for treatment with CAD-CAM ceramic veneers: A clinical report.

PubMed

Lin, Wei-Shao; Harris, Bryan T; Phasuk, Kamolphob; Llop, Daniel R; Morton, Dean

2018-02-01

This clinical report describes a digital workflow using the virtual smile design approach augmented with a static 3-dimensional (3D) virtual patient with photorealistic appearance to restore maxillary central incisors by using computer-aided design and computer-aided manufacturing (CAD-CAM) monolithic lithium disilicate ceramic veneers. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Comparison of ropivacaine and articaine with epinephrine for infiltration anaesthesia in dentistry - a randomized study.

PubMed

Krzemiński, T F; Gilowski, L; Wiench, R; Płocica, I; Kondzielnik, P; Sielańczyk, A

2011-08-01

To compare the efficacy, onset time and duration of maxillary infiltration anaesthesia with 0.5% plain ropivacaine or 4% articaine with epinephrine 1 : 100 000 and to determine their possible influence on cardiovascular parameters. Sixty volunteers received 1.8 mL of the anaesthetic for buccal infiltration anaesthesia of maxillary central and lateral incisors and canine teeth without caries, restorations or signs of pulpitis. The efficacy, onset time and duration of pulp anaesthesia were assessed with an electric pulp tester. The duration of numbness of the upper lip was also monitored. Blood pressure and heart rate were measured before and after administration of the solutions. The efficacy of anaesthesia of lateral and central incisors was 100% for both anaesthetics. There were insignificant differences in effectiveness of canine pulp anaesthesia. The mean onset time was significantly (P < 0.05) shorter for ropivacaine (2.22 min) when compared with articaine (4.08 min). The duration of action and soft tissue anaesthesia were also significantly (P < 0.05) longer for ropivacaine (79.2 and 264 min) when compared with articaine (63.7 and 195.2 min, respectively). Ropivacaine caused significant (P < 0.05) increases in blood pressure and heart rate. Ropivacaine (0.5%) achieved effective and long duration of uninflamed pulp and soft tissue anaesthesia. Ropivacaine could be useful for long-lasting operative procedures without the need for a vasoconstrictor. © 2011 International Endodontic Journal.

Endodontic Management of a Maxillary Lateral Incisor with 4 Root Canals and a Dens Invaginatus Tract.

PubMed

Nosrat, Ali; Schneider, S Craig

2015-07-01

Dens invaginatus (DI) is associated with complex internal anatomy. This article represents a maxillary lateral incisor with 5 root canals including DI. The treatment was planned and performed using cone-beam computed tomographic (CBCT) imaging. After clinical and radiographic evaluations, tooth #7 was diagnosed with DI and pulp necrosis with symptomatic apical periodontitis. Periapical radiographs of the tooth showed 2 roots and complex internal anatomy. CBCT evaluation revealed tooth #7 had 5 separate canals (4 root canals and 1 DI canal extending through the root to the periodontal ligament), communication between DI and the root canal system, and severe and multiple curvatures of the palatal canals. Root canal treatment was completed in 2 visits. Modified access openings were required to safely treat the dilacerated palatal canals. At the 6-month re-evaluation, the patient reported he had remained asymptomatic and his tooth had remained functional since the treatment was completed. Clinical examination showed tooth #7 had no sensitivity to percussion or palpation, probe depths within normal limits (≤3 mm), and no mobility. Radiographic assessment of the tooth showed significant osseous healing of the preoperative lesion. Three-dimensional imaging is a valuable tool for endodontic management of teeth with complex internal anatomy. Three-dimensional imaging is recommended for evaluating and treatment planning cases with DI. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Dentoskeletal changes induced by the Jasper jumper and the activator-headgear combination appliances followed by fixed orthodontic treatment.

PubMed

Lima, Karina Jerônimo Rodrigues Santiago de; Henriques, José Fernando Castanha; Janson, Guilherme; Pereira, Suelen Cristina da Costa; Neves, Leniana Santos; Cançado, Rodrigo Hermont

2013-05-01

The aim of this study was to compare the dentoskeletal changes of patients with Class II Division 1 malocclusion treated with either the Jasper jumper appliance or the activator-headgear combination, both associated with fixed appliances. The sample comprised 72 subjects with Class II Division 1 malocclusion divided into 3 groups: group 1 included 25 subjects treated with fixed appliances and the force modules of the Jasper jumper at an initial mean age of 12.72 years, group 2 included 25 subjects treated with the activator-headgear combination followed by fixed appliances at an initial mean age of 11.07 years, and group 3 included 22 untreated subjects at an initial mean age of 12.67 years. Initial cephalometric characteristics and dentoskeletal changes were compared with analysis of variance. Both experimental groups had similar dentoskeletal changes: restrictive effect on the maxilla, clockwise mandibular rotation and a slight increase in anterior face height, retrusion of the maxillary incisors, distalization of the maxillary molars, protrusion of the mandibular incisors, extrusion of the mandibular molars, and significant improvements of the maxillomandibular relationship, overjet, overbite, and the molar relationship. The effects of the Jasper jumper and the activator-headgear combination followed by fixed orthodontic appliances were similar in Class II malocclusion treatment. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Treatment effects of the Jasper Jumper and the Bionator associated with fixed appliances.

PubMed

Neves, Leniana Santos; Janson, Guilherme; Cançado, Rodrigo Hermont; de Lima, Karina Jerônimo Rodrigues Santiago; Fernandes, Thaís Maria Freire; Henriques, José Fernando Castanha

2014-01-01

The aim of this study was to evaluate the effects of Class II malocclusion treatment with the Jasper Jumper and the Bionator, associated with fixed appliances. The sample comprised 77 young individuals divided into 3 groups: Group 1 consisted of 25 patients treated with the Jasper Jumper appliance associated with fixed appliances for a mean period of 2.15 years; group 2 had 30 patients, treated with the Bionator and fixed appliances, for a mean treatment time of 3.92 years; and the control group included 22 subjects followed for a mean period of 2.13 years. The initial and final lateral cephalograms of the patients were evaluated. Intergroup comparison at the initial stage and of the treatment changes were performed by analysis of variance. Their effects consisted in a restrictive effect on the maxilla, a slight increase in anterior face height, retrusion and extrusion of the maxillary incisors, labial tipping and protrusion of the mandibular incisors in both groups and intrusion with the Jasper Jumper appliance, maxillary molar distalization with the Jasper Jumper, extrusion and mesialization of the mandibular molars, both appliances provided significant improvement of the maxillomandibular relationship, overjet, overbite and molar relationship. The effects of both appliances in class II malocclusion treatment are similar; however, treatment with the Jasper Jumper was shorter than with the Bionator.

The Effect of Resection Angle on Stress Distribution after Root-End Surgery.

PubMed

Monteiro, Jaiane Bandoli; Dal Piva, Amanda Maria de Oliveira; Tribst, João Paulo Mendes; Borges, Alexandre Luiz Souto; Tango, Rubens Nisie

2018-01-01

This study aimed to investigate the influence of the resection angle on the stress distribution of retrograde endodontic treated maxillary incisors under oblique-load application. A maxillary central incisor which was endodontically treated and restored with a fiber glass post was obtained in a 3-dimensional numerical model and distributed into three groups according to type of resection: control; restored with fiber post without retrograde obturation, R45 and R90 with 45º and 90º resection from tooth axial axis, respectively and restored with Fuji II LC (GC America). The numerical models received a 45 º occlusal load of 200 N/cm 2 on the middle of lingual surface. All materials and structures were considered linear elastic, homogeneous and isotropic. Numerical models were plotted and meshed with isoparametric elements, and the results were analyzed using maximum principal stress (MPS). MPS showed greater stress values in the bone tissue for control group than the other groups. Groups with apicectomy showed acceptable stress distribution on the fiber post, cement layer and root dentin, presenting more improved values than control group. Apicectomy at 90 º promotes more homogeneity on stress distribution on the fiber post, cement layer and root dentin, which suggests less probability of failure. However, due to its facility and stress distribution also being better than control group, apicectomy at 45 ° could be a good choice for clinicians.

Esthetic preferences of laypersons of different cultures and races with regard to smile attractiveness.

PubMed

Sadrhaghighi, Amir Houman; Zarghami, Afsaneh; Sadrhaghighi, Shahrzad; Mohammadi, Amir; Eskandarinezhad, Mahsa

2017-01-01

Culture and ethnicity are among the factors affecting esthetic judgment of individuals. This study aimed to assess the acceptability threshold of variations in four components of an esthetic smile namely vertical lip thickness, dental midline deviation, buccal corridor, and the golden ratio in maxillary lateral incisors display among laypersons of different races and cultures. Raters (n = 35 in each city) among laypersons of nine cities namely Istanbul, Isfahan, Tabriz, Tehran, Doha, Rome, Sydney, Chicago, and Yazd, were given a photo album containing 27 random images of an attractive female smile, digitally altered with regard to the four smile components. They scored each picture from 0 to 100 in terms of smile attractiveness. Data were analyzed using SPSS 13 and the acceptability threshold for each component was calculated in each city using the Spearman and Wilcoxon tests. P< 0.05 was considered statistically significant. No significant differences were noted with regard to the increased vertical lip thickness, and an acceptability threshold could not be determined for it. The acceptability thresholds for midline deviations, buccal corridor, and the golden ratio were different among different cities. One-millimeter increase in the displayed width of maxillary lateral incisors was more desirable than the golden ratio standard width. Culture and race may significantly affect the esthetic preference of individuals with regard to smile attractiveness.

Effects of unilateral molar distalization with a modified pendulum appliance.

PubMed

Schütze, Stefan F; Gedrange, Tomas; Zellmann, Markus R; Harzer, Winfried

2007-05-01

The purpose of this study was to evaluate skeletal and dentoalveolar changes due to unilateral distalization and to determine side effects. Cephalograms and dental casts before and after distal movement of the maxillary molars with pendulum appliances in 15 consecutively treated patients (5 girls and 10 boys, 12.06 +/- 1.32 years), were included in this study. The duration of distalization was 8.46 +/- 2.23 months. Cephalometric analysis showed no remarkable growth between the 2 measurement times. The mean value for distalization of the first molars was 3.83 +/- 1.09 mm, with distal tipping of 6.45 degrees . The maxillary second molars were also moved distally 2.83 +/- 1.32 mm and tipped distally 14.7 degrees . No significant changes in the position of the third molars were measured. The mean reciprocal mesial movement of the premolars was 1.18 +/- 1.31 mm, with distal tipping of 1.94 degrees . The incisors moved 0.84 +/- 0.79 mm mesially, with mesial tipping of 0.02 degrees and extrusion of 1.21 mm. There was also a significant influence on the contralateral anchorage unit. However, unilateral distalization reduced incisor proclination and induced moderate distal movement of the contralateral anchorage unit based on rotation around a virtual axis perpendicular to the Nance button. Effective distal molar movement and less anchorage loss at the front teeth are advantages of unilateral distalization.

Finishing effectiveness of different archwires using SmartClip™ self-ligating brackets: a clinical study.

PubMed

Ferrari, Simona; Bellincampi, Marta; Sfondrini, M Francesca; Caprioglio, Alberto; Gandini, Paola

2014-03-01

The aim of this clinical prospective trial was to evaluate finishing effectiveness of stainless steel (SS) archwires versus titanium molybdenum alloy (TMA) archwires using SmartClip™ self-ligating brackets. Thirty-two patients were divided in two groups: a group of 21 (G1-SS) and a group of 12 (G2-TMA). The protocol consisted of two different finishing archwires coupled with self-ligating brackets: .019 × .025" SS archwires for G1-SS and .019 × .025" TMA archwires for G2-TMA. Lateral cephalometric radiographs obtained at the beginning (T1) and end (T2) of treatment were used to assess the changes in incisor inclination, and measurements of irregularity index (LII), interdental widths, arch length (AL) and arch depth (AD) were made on dental casts to investigate changes associated with crowding correction. No significant differences from T1 to T2 were found for incisors proclination and AL changes. Statistically significant differences were found for LII (higher decrease in G1-SS), maxillary AD (higher increase in G1-SS) and three interdental maxillary widths (higher in G1-SS). The statistically significant differences found were few and clinically negligible. Self-ligating brackets system coupled with .019 × .025" archwires showed good finishing effectiveness, but no clinically significant differences were found between SS and TMA. Copyright © 2013 CEO. Published by Elsevier Masson SAS. All rights reserved.

Characterization of stem and progenitor cells in the dental pulp of erupted and unerupted murine molars

PubMed Central

Balic, Anamaria; Aguila, H. Leonardo; Caimano, Melissa J.; Francone, Victor P.; Mina, Mina

2010-01-01

In the past few years there have been significant advances in the identification of putative stem cells also referred to as “mesenchymal stem cells” (MSC) in dental tissues including the dental pulp. It is thought that MSC in dental pulp share certain similarities with MSC isolated from other tissues. However, cells in dental pulp are still poorly characterized. This study focused on the characterization of progenitor and stem cells in dental pulps of erupted and unerupted mice molars. Our study showed that dental pulps from unerupted molars contain a significant number of cells expressing CD90+/CD45-, CD117+/CD45-, Sca-1+/CD45- and little if any CD45+ cells. Our in vitro functional studies showed that dental pulp cells from unerupted molars displayed extensive osteo-dentinogenic potential but were unable to differentiate into chondrocytes and adipocytes. Dental pulp from erupted molars displayed a reduced number of cells, contained higher percentage of CD45+ and lower percentage of cells expressing CD90+/CD45-, CD117+/CD45- as compared to unerupted molars. In vitro functional assays demonstrated the ability of a small fraction of cells to differentiate into odontoblasts, osteoblasts, adipocytes and chondrocytes. There was a significant reduction in the osteo-dentinogenic potential of the pulp cells derived from erupted molars compared to unerupted molars. Furthermore, the adipogenic and chondrogenic differentiation of pulp cells from erupted molars was dependent on a long induction period and infrequent. Based on these findings we propose that the dental pulp of the erupted molars contain a small population of multipotent cells, whereas the dental pulp of the unerupted molars does not contain multipotent cells but is enriched in osteo-dentinogenic progenitors engaged in the formation of coronal and radicular odontoblasts. PMID:20193787

Changes consequent to maxillary molar distalization with the bone-anchored pendulum appliance

PubMed Central

Cambiano, Aldo Otazú; Janson, Guilherme; Fuziy, Acácio; Garib, Daniela Gamba; Lorenzoni, Diego Coelho

2017-01-01

OBJECTIVES: This retrospective study aimed to evaluate the dentoalveolar, skeletal, and soft tissue effects obtained with bone-anchored pendulum appliance in patients with Class II malocclusion. MATERIALS AND METHODS: A total of 18 patients (4 male, 14 female) at a mean pretreatment age of 14.0 years (+1.08) were enrolled in this study. All patients were treated with the bone-anchored pendulum appliance for an average duration of 4.8 months. Only the active distalization period was evaluated with predistalization and postdistalization lateral cephalograms. Skeletal, dentoalveolar, and soft tissue variables were obtained. Based on these variables, the treatment effects were evaluated with dependent t-test. RESULTS: Correction of Class II molar relationship resulted from distal movement of 3.45 mm and tipping of 11.24° of the first maxillary molars. The premolars were distalized accompanying the molars. CONCLUSIONS: The bone-anchored pendulum appliance proved to be an effective method for distalization of maxillary molars in cases that require maximum anchorage, avoiding reciprocal mesial movement of premolars and incisors. PMID:29119095

Class II malocclusion with accentuated occlusal plane inclination corrected with miniplate: a case report

PubMed Central

Farret, Marcel Marchiori; Farret, Milton M. Benitez

2016-01-01

ABSTRACT Introduction: A canted occlusal plane presents an unesthetic element of the smile. The correction of this asymmetry has been typically considered difficult by orthodontists, as it requires complex mechanics and may sometimes even require orthognathic surgery. Objective: This paper outlines the case of a 29-year-old woman with Class II malocclusion, pronounced midline deviation and accentuated occlusal plane inclination caused by mandibular deciduous molar ankylosis. Methods: The patient was treated with a miniplate used to provide anchorage in order to intrude maxillary teeth and extrude mandibular teeth on one side, thus eliminating asymmetry. Class II was corrected on the left side by means of distalization, anchored in the miniplate as well. On the right side, maxillary first premolar was extracted and molar relationship was kept in Class II, while canines were moved to Class I relationship. The patient received implant-prosthetic rehabilitation for maxillary left lateral incisor and mandibular left second premolar. Results: At the end of treatment, Class II was corrected, midlines were matched and the canted occlusal plane was totally corrected, thereby improving smile function and esthetics. PMID:27409658

Partitioning the components of maxillary tooth displacement by the comparison of data from three cephalometric superimpositions.

PubMed

Baumrind, S; Ben-Bassat, Y; Bravo, L A; Curry, S; Korn, E L

1996-01-01

Using roentgenographic cephalograms from a sample of subjects with metallic implants, appropriately superimposed tracings were used to distinguish developmental and treatment-associated displacements of the maxillary central incisor and first molar associated "local" changes within the periodontium from "secondary" changes which reflect sutural and appositional growth at more distant osseous loci. Tracings were superimposed on anterior cranial base (ACB), on the maxillary implants only (IMP_MAX), and according to the best fit of maxillary anatomic structures without reference to the implants (A_MAX). Using the IMP_MAX superimposition, one could measure total local displacement at any landmark taking into consideration the effects of all appositional and resorptive changes on the superior and anterior surfaces of the palate, whereas using the A_MAX superimposition one could measure local displacement without consideration of surface appositional and resorptive changes. If the second of these measurements were subtracted from the first, the result would be a direct measurement of the effects of surface appositional and resorptive changes as they are expressed at that particular landmark. This strategy has enabled us to quantify and report the amount of accommodation which occurs at the location of each dental landmark in association with the resorptive and appositional changes which occur through time on the superior and anterior surfaces of the hard palate.

Infraorbital nerve transposition to expand the endoscopic transnasal maxillectomy.

PubMed

Salzano, Giovanni; Turri-Zanoni, Mario; Karligkiotis, Apostolos; Zocchi, Jacopo; Dell'Aversana Orabona, Giovanni; Califano, Luigi; Battaglia, Paolo; Castelnuovo, Paolo

2017-02-01

The infraorbital nerve (ION) is a terminal branch of the maxillary nerve (V2) providing sensory innervation to the malar skin. It is sometimes necessary to sacrifice the ION and its branches to obtain adequate maxillary sinus exposure for radical resection of sinonasal tumors. Consequently, patients suffer temporary or permanent paresthesia, hypoestesthia, and neuralgia of the face. We describe an innovative technique used for preservation of the ION while removing the anterior, superior, and lateral walls of the maxillary sinus through a medial endoscopic transnasal maxillectomy. All patients who underwent transnasal endoscopic maxillectomy with ION transposition in our institute were retrospectively reviewed. Two patients were identified who had been treated for sinonasal cancers using this approach. No major complications were observed. Transient loss of ION function was observed with complete recovery of skin sensory perception within 6 months of surgery. One patient referred to a mild permanent anesthesia of the upper incisors. No diplopia or enophthalmos were encountered in any of the patients. The ION transposition is useful for selected cases of benign and malignant sinonasal tumors that do not infiltrate the ION itself but involve the surrounding portion of the maxillary sinus. Anatomic preservation of the ION seems to be beneficial to the postoperative quality of life of such patients. © 2016 ARS-AAOA, LLC.

Assessment of the dental and skeletal effects of fan-type rapid maxillary expansion screw and Hyrax screw on craniofacial structures.

PubMed

Gopalakrishnan, Umarevathi; Sridhar, Premkumar

2017-01-01

The purpose of the study was to assess the skeletal and dental effects of fan-type rapid maxillary expansion (RME) appliance and Hyrax RME appliance on the craniofacial structures. The sample of the study included 12 patients with constricted maxillary arches. Acrylic bonded type of attachment was used for both groups. Changes in sagittal, vertical, and transverse relationship were assessed with lateral and frontal cephalograms, respectively. Intercanine and intermolar widths were measured with stone models. Pre- and immediate post-treatment records were statistically analyzed with Wilcoxon signed-rank test. The differences between the groups were evaluated using Mann-Whitney U-test. Since the data pertaining to intercanine width and intermolar width were normally distributed, parametric test of significance (unpaired t -test) was used to compare them. Results showed that Hyrax presented with significantly greater increments for both nasal cavity width and maxillary width when compared to fan-type RME. Both groups had retroclination of incisors. The increase in the intercanine width was almost similar in both groups. Fan-type RME caused only minimal expansion of the intermolar width when compared to the Hyrax. The ratio between the intercanine and intermolar width expansion was nearly 4:1 in the fan-type RME and 0.75:1 in Hyrax.

Perception of altered smile esthetics among Moroccan professionals and lay people.

PubMed

Ousehal, L; Aghoutan, H; Chemlali, S; Anssari, I Filali; Talic, N

2016-10-01

To evaluate and compare the impact of altered smile characteristics on the perception of smile esthetics between Moroccan dentists and lay people. Thirty-four digital smile photographs displaying alterations in crown length and width, lateral incisor gingival margin position, gingival exposition, midline diastema, and upper midline deviation were presented to a sample of 30 dentists and 30 lay people. The ratings were assessed with a visual analog scale. Compared to that of lay people, Moroccan dentists' evaluation of the gingival smile was more critical when the decrease in central incisor crown length was 2.5 mm ( p  < 0.001) or greater and when the increase in gingival exposition was 4 mm or greater ( p  < 0.01). Moroccan dentists were also critical in their evaluation of maxillary lateral incisor crown width alterations ( p  < 0.05) and incisal midline deviations ( p  < 0.05). However, the professionals and lay people similarly evaluated irregularities in the incisor gingival margin position. Increases in the midline diastema were judged critically by both Moroccan dentists and lay people. In this sample, Moroccan dentists evaluate smile esthetic alterations more critically than Moroccan lay people. This difference in perception of smile discrepancies must be taken into account during the finishing phases of orthodontic treatment and restoration of the anterior teeth in Moroccan patients.

A novel biomechanical model assessing continuous orthodontic archwire activation

PubMed Central

Canales, Christopher; Larson, Matthew; Grauer, Dan; Sheats, Rose; Stevens, Clarke; Ko, Ching-Chang

2013-01-01

Objective The biomechanics of a continuous archwire inserted into multiple orthodontic brackets is poorly understood. The purpose of this research was to apply the birth-death technique to simulate insertion of an orthodontic wire and consequent transfer of forces to the dentition in an anatomically accurate model. Methods A digital model containing the maxillary dentition, periodontal ligament (PDL), and surrounding bone was constructed from human computerized tomography data. Virtual brackets were placed on four teeth (central and lateral incisors, canine and first premolar), and a steel archwire (0.019″ × 0.025″) with a 0.5 mm step bend to intrude the lateral incisor was virtually inserted into the bracket slots. Forces applied to the dentition and surrounding structures were simulated utilizing the birth-death technique. Results The goal of simulating a complete bracket-wire system on accurate anatomy including multiple teeth was achieved. Orthodontic force delivered by the wire-bracket interaction was: central incisor 19.1 N, lateral incisor 21.9 N, and canine 19.9 N. Loading the model with equivalent point forces showed a different stress distribution in the PDL. Conclusions The birth-death technique proved to be a useful biomechanical simulation method for placement of a continuous archwire in orthodontic brackets. The ability to view the stress distribution throughout proper anatomy and appliances advances understanding of orthodontic biomechanics. PMID:23374936

Predictors of favorable soft tissue profile outcomes following Class II Twin-block treatment.

PubMed

Kim, Ji-Eun; Mah, Su-Jung; Kim, Tae-Woo; Kim, Su-Jung; Park, Ki-Ho; Kang, Yoon-Goo

2018-01-01

The aim of this study was to determine cephalometric factors that help predict favorable soft-tissue profile outcomes following treatment with the Class II Twin-block appliance. Pre- and post-treatment lateral cephalograms of 45 patients treated with the Class II Twin-block appliance were retrospectively analyzed. Profile silhouettes were drawn from the cephalograms and evaluated by three orthodontists in order to determine the extent of improvement. Samples were divided into a favorable group (upper 30% of visual analogue scale [VAS] scores, n = 14) and an unfavorable group (lower 30% of VAS scores, n = 14). Skeletal and soft-tissue measurements were performed on the cephalograms and an intergroup comparison was conducted. An independent t -test revealed that the following pre-treatment values were lower in the favorable group compared to the unfavorable group: lower incisor to mandibular plane angle, lower incisor to pogonion distance, point A-nasion-point B angle, sella-nasion line (SN) to maxillary plane angle, SN to mandibular plane angle, gonial angle, and symphysis inclination. The favorable group had a larger incisor inclination to occlusal plane. Moreover, the favorable group showed larger post-treatment changes in gonial angle, B point projection, and pogonion projection than did the unfavorable group. Class II malocclusion patients with a low divergent skeletal pattern and reduced lower incisor protrusions are likely to show more improvement in soft-tissue profile outcomes following Class II Twin-block treatment.

Dental Anomalies in Different Types of Cleft Lip and Palate: Is There Any Relation?

PubMed

Germec Cakan, Derya; Nur Yilmaz, Rahime Burcu; Bulut, Feyza Nur; Aksoy, Ayca

2018-02-26

The aims of this study were to evaluate the prevalence of dental anomalies in Turkish patients with different types of cleft lip and palate (CLP) and investigate the relationship between the type of cleft and the dental anomaly. Eighty-eight patients with cleft lip and/or palate (mean age: 14.1 ± 6.4 years) were enrolled in this retrospective study. Dental models, panoramic radiographs, and intraoral photographs of these patients were evaluated to detect any maxillary dental anomaly (number and size anomalies). Two hundred fifty unaffected subjects (mean age: 15.2 ± 7.2 years) composed the control group. Data were evaluated using the independent t test, χ, Fischer exact test, and the odds ratio. Dental anomaly frequency was significantly higher in the cleft group compared with the control group. Tooth agenesis was the most common dental anomaly, followed by microdontia and supernumerary tooth. Lateral incisor agenesis was seen in 69% of the unilateral CLP, in 78% of the bilateral CLP, and in 18% of the cleft palate patients. A significant association was revealed between the right unilateral CLP and the right lateral incisor agenesis (P = 0.0001), the left unilateral CLP and the left lateral incisor agenesis (P = 0.002), and the bilateral CLP and the bilateral lateral incisor agenesis (P = 0.0001). Dental anomalies are more frequently seen in patients with CLP compared with the general population. There is a relationship between the cleft type and the ipsilateral lateral incisor agenesis.

Disturbances of dental development distinguish patients with oligodontia-ectodermal dysplasia from isolated oligodontia.

PubMed

Dhamo, B; Kuijpers, M A R; Balk-Leurs, I; Boxum, C; Wolvius, E B; Ongkosuwito, E M

2018-02-01

To investigate phenotypic differences in dental development between isolated oligodontia and oligodontia-ectodermal dysplasia (ED). A total of 129 patients diagnosed with isolated oligodontia and 22 patients with oligodontia as part of ED were eligible. The phenotype of dental development was assessed for the frequency of missing a certain tooth, dental age, development of each tooth present, abnormal size and abnormal shape of teeth. The data were analysed building linear, ordinal and logistic regression models. Compared to patients with isolated oligodontia, patients with oligodontia-ED missed more frequently central incisors and second molars in both jaws, and lateral incisors in the mandible (P < .05). Oligodontia-ED was associated with delayed development of the permanent dentition (β = -0.10; 95% CI: -0.17, -0.03). Specifically, the maxillary teeth: right central incisor, right lateral incisor, right second premolar and left second premolar were delayed approximately from 2 to 4 developmental stages. In addition, the left mandibular second premolar was 3 developmental stages delayed. Abnormal shape of teeth was 7 times more evident in patients with oligodontia-ED compared to patients with isolated oligodontia (OR = 6.54; 95% CI: 2.34, 18.28). The abnormal size of teeth was not a distinctive characteristic for oligodontia-ED. Oligodontia-ED distinguishes from isolated oligodontia by more disturbances in dental development. The abnormal shape of incisors and canines in a patient with oligodontia can raise suspicions for accompanying ectodermal abnormalities. © 2017 The Authors. Orthodontics & Craniofacial Research Published by John Wiley & Sons Ltd.

A study of root canal morphology of human primary incisors and molars using cone beam computerized tomography: an in vitro study.

PubMed

Gaurav, Vivek; Srivastava, Nikhil; Rana, Vivek; Adlakha, Vivek Kumar

2013-01-01

Variations in morphology of root canals in primary teeth usually leads to complications during and after endodontic therapy. To improve the success in endodontics, a thorough knowledge of the root canal morphology is essential. The aim of this study was to assess the variation in number and morphology of the root canals of primary incisors and molars and to study the applicability of cone beam computerized tomography (CBCT) in assessing the same. A total of 60 primary molars and incisors with full root length were collected and various parameters such as the number of roots, number of canals, diameter of root canal at cementoenamel junction and middle-third, length and angulations of roots of primary molars and incisors were studied using CBCT. The observations were put to descriptive statistics to find out the frequency, mean, standard deviation and range for all four subgroups. Further, unpaired t-test was used to compare these parameters between subgroups and analysis of variance test was implemented to evaluate the parameters within the subgroups. The CBCT showed the presence of bifurcation of root canal at middle third in 13% of mandibular incisors while 20% of mandibular molars had two canals in distal root. The diameter of distobuccal root canal of maxillary molars and mesiolingual canal of mandibular molars was found to be minimum. CBCT is a relatively new and effective technology, which provides an auxiliary imaging modality to supplement conventional radiography for assessing the variation in root canal morphology of primary teeth.

Treatment of horizontal root fractures using MTA as apical plug: report of 3 cases.

PubMed

Kusgoz, Adem; Yildirim, Tahsin; Tanriver, Mehmet; Yesilyurt, Cemal

2009-05-01

Root fractures are rare occurrences through all dental injuries. They comprise only 0.5% to 7.0% of traumas affecting the permanent teeth. Generally the cervical and middle thirds of the roots are affected. The healing of these lesions depends on the health of the pulp, dentine, cementum, and alveolar bone. These case reports describe the management and 2-year follow-up of 3 maxillary central incisors with horizontal root fractures treated with mineral trioxide aggregate (MTA) as apical plug.

Macrodontia, shovel-shaped incisors, and multituberculism: probable Ekman-Westborg-Julin trait.

PubMed

Reardon, Gayle Tieszen; Slayton, L Rebecca; Norby, Clinton; Geneser, Teresa

2012-01-01

Multiple macrodontia is a rare finding and is defined as a condition in which a tooth is significantly larger than normal. Macrodontia may occur as an isolated finding, part of a group of dental anomalies, or as a component of a syndrome with multiple oral and systemic manifestations. The purpose of this paper was to report a case of macrodontia affecting all permanent teeth and exhibiting shovel-shaped maxillary and mandibular incisors and multituberculate molars and premolars. Some or all of this patient's characteristics have been reported in both males and females, with a ratio of 5:2. No inheritance pattern has been established, as these traits have generally occurred spontaneously. As more individuals are identified and as molecular techniques continue to advance, it is probable that a gene or genes responsible for macrodontia and the associated traits will be identified.

Evaluation of accuracy of shade selection using two spectrophotometer systems: Vita Easyshade and Degudent Shadepilot.

PubMed

Kalantari, Mohammad Hassan; Ghoraishian, Seyed Ahmad; Mohaghegh, Mina

2017-01-01

The aim of this in vitro study was to evaluate the accuracy of shade matching using two spectrophotometric devices. Thirteen patients who require a full coverage restoration for one of their maxillary central incisors were selected while the adjacent central incisor was intact. 3 same frameworks were constructed for each tooth using computer-aided design and computer-aided manufacturing technology. Shade matching was performed using Vita Easyshade spectrophotometer, Shadepilot spectrophotometer, and Vitapan classical shade guide for the first, second, and third crown subsequently. After application, firing, and glazing of the porcelain, the color was evaluated and scored by five inspectors. Both spectrophotometric systems showed significantly better results than visual method ( P < 0.05) while there were no significant differences between Vita Easyshade and Shadepilot spectrophotometers ( P < 0.05). Spectrophotometers are a good substitute for visual color selection methods.

Evaluation of accuracy of shade selection using two spectrophotometer systems: Vita Easyshade and Degudent Shadepilot

PubMed Central

Kalantari, Mohammad Hassan; Ghoraishian, Seyed Ahmad; Mohaghegh, Mina

2017-01-01

Objective: The aim of this in vitro study was to evaluate the accuracy of shade matching using two spectrophotometric devices. Materials and Methods: Thirteen patients who require a full coverage restoration for one of their maxillary central incisors were selected while the adjacent central incisor was intact. 3 same frameworks were constructed for each tooth using computer-aided design and computer-aided manufacturing technology. Shade matching was performed using Vita Easyshade spectrophotometer, Shadepilot spectrophotometer, and Vitapan classical shade guide for the first, second, and third crown subsequently. After application, firing, and glazing of the porcelain, the color was evaluated and scored by five inspectors. Results: Both spectrophotometric systems showed significantly better results than visual method (P < 0.05) while there were no significant differences between Vita Easyshade and Shadepilot spectrophotometers (P < 0.05). Conclusion: Spectrophotometers are a good substitute for visual color selection methods. PMID:28729792

Evaluation of treatment modality for skeletal Class III malocclusion with labioversed upper incisors and/or protrusive maxilla: surgical movement and stability of rotational maxillary setback procedure.

PubMed

Baek, Seung-Hak; Kim, Keunwoo; Choi, Jin-Young

2009-11-01

The purpose of this study was to evaluate the range of surgical movement and stability of rotational maxillary setback (MXS) procedure as treatment modality for skeletal class III malocclusion with labioversed upper incisors and/or protrusive maxilla (CIII/LUI-PM). The samples consisted of 20 adult patients (mean [SD] age, 23.55 [4.30] y) who had CIII/LUI-PM and were treated with rotational MXS and mandibular setback using LeFort I osteotomy and bilateral sagittal split ramus osteotomy. The lateral cephalograms were obtained 1 week before (T0), 1 week after (T1), and 1 year after surgery (T2). The amounts of surgical movement, relapse, and stability rate of the upper central incisor (UIE), upper first molar (U6MBC), point A (A), incisive canal point, and posterior nasal spine (PNS) in relation to the reference planes were statistically analyzed. During T1 - T0, there were backward and downward movements of UIE and A, backward and upward movements of U6MBC, and upward and slight forward movements of PNS due to rotational MXS. The center of rotation of the maxilla was placed between A and the upper premolar area. During T2 - T1, skeletal landmarks showed clinically insignificant counterclockwise rotational relapse (<0.5 mm). The anteroposterior (AP) and vertical positions of skeletal landmarks were more stable than dental landmarks. The U6MBC was more stable in the vertical aspect than UIE (P < 0.01). Posterior nasal spine showed significantly higher stability rate in both vertical and AP aspects (P < 0.01, respectively), whereas UIE showed a lower value in the vertical aspect (P < 0.05). Rotational MXS procedure in cases with CIII/LUI-PM can be regarded as a stable one, especially in the vertical and AP positions of PNS. Vertical relapse in UIE should be managed with postoperative orthodontic treatment.

Regenerative Endodontic Treatment versus Apical Plug in Immature Teeth: Three-Year Follow-Up.

PubMed

Asgary, Saeed; Fazlyab, Mahta; Nosrat, Ali

This report compares and evaluates the treatment outcomes of regenerative endodontic treatment and apical plug as two accepted treatment protocols in a pair of necrotic immature maxillary central incisors of a 12-year old female. The patient was referred complaining of a dull pain and swelling in her upper lip area. She had a history of trauma to the anterior maxilla two years earlier. Both teeth were clinically diagnosed with pulp necrosis and periapical radiographs revealed that separate periapical radiolucent lesions surrounded the immature apices of both teeth. The left and right incisors were treated with apical plug and regenerative endodontic treatment, respectively, using calcium-enriched mixture (CEM) cement. The patient was followed-up for three years. During this period, both teeth were clinically asymptomatic and showed complete radiographic healing of the periapical lesions. The right central incisor showed root development. No tooth discoloration was evident. Apexification by apical plug placement and pulp regeneration are both reliable treatments for immature non-vital teeth. In order to choose the right treatment the advantages of either technique should be weighed against its drawbacks. CEM cement can be successfully applied for both purposes. This biomaterial causes less discoloration of the tooth.

Effects of the pendulum appliance, cervical headgear, and 2 premolar extractions followed by fixed appliances in patients with Class II malocclusion.

PubMed

de Almeida-Pedrin, Renata Rodrigues; Henriques, José Fernando Castanha; de Almeida, Renato Rodrigues; de Almeida, Marcio Rodrigues; McNamara, James A

2009-12-01

In this retrospective study, we compared the cephalometric effects, the dental-arch changes, and the efficiency of Class II treatment with the pendulum appliance, cervical headgear, or extraction of 2 maxillary premolars, all associated with fixed appliance therapy. The sample of 82 patients with Class II malocclusion was divided into 3 groups: group 1 patients (n = 22; treatment time, 3.8 years) were treated with the pendulum appliance and fixed orthodontic appliances. Group 2 patients (n = 30; treatment time, 3.2 years) were treated with cervical headgear followed by fixed appliances; group 3 patients (n = 30; treatment time, 2.1 years) were treated with 2 maxillary premolar extractions and fixed appliances. The average starting ages of the groups ranged from 13.2 to 13.8 years. Data were obtained from serial cephalometric measurements and dental casts. The dental casts were analyzed with the treatment priority index. The treatment efficiency index was also used. The 3 treatment protocols produced similar cephalometric effects, especially skeletally. Comparisons among the 2 distalizing appliances (pendulum and cervical headgear) and extraction of 2 maxillary premolars for Class II treatment showed changes primarily in the maxillary dentoalveolar component and dental relationships. The facial profile was similar after treatment, except for slightly more retrusion of the upper lip in the extraction patients. The treatment priority index demonstrated that occlusal outcomes also were similar among the groups. The treatment efficiency index had higher values for the extraction group. The effects of treatment with the pendulum appliance or cervical headgear and extraction of 2 maxillary premolars associated with fixed appliances were similar from both occlusal and cephalometric standpoints. Class II treatment with extraction of maxillary teeth was more efficient because of the shorter treatment time. Differences in maxillary incisor retraction should be noted, but these differences might have been due to greater maxillary dentoalveolar protrusion in the extraction group before treatment.

Preliminary three-dimensional analysis of tooth movement and arch dimension change of the maxillary dentition in Class II division 1 malocclusion treated with first premolar extraction: conventional anchorage vs. mini-implant anchorage.

PubMed

Park, Heon-Mook; Kim, Byoung-Ho; Yang, Il-Hyung; Baek, Seung-Hak

2012-12-01

This study aimed to compare the effects of conventional and orthodontic mini-implant (OMI) anchorage on tooth movement and arch-dimension changes in the maxillary dentition in Class II division 1 (CII div.1) patients. CII div.1 patients treated with extraction of the maxillary first and mandibular second premolars and sliding mechanics were allotted to conventional anchorage group (CA, n = 12) or OMI anchorage group (OA, n = 12). Pre- and post-treatment three-dimensional virtual maxillary models were superimposed using the best-fit method. Linear, angular, and arch-dimension variables were measured with software program. Mann-Whitney U-test and Wilcoxon signed-rank test were performed for statistical analysis. Compared to the CA group, the OMI group showed more backward movement of the maxillary central and lateral incisors and canine (MXCI, MXLI, MXC, respectively; 1.6 mm, p < 0.001; 0.9 mm, p < 0.05; 1.2 mm, p < 0.001); more intrusion of the MXCI and MXC (1.3 mm, 0.5 mm, all p < 0.01); less forward movement of the maxillary second premolar, first, and second molars (MXP2, MXM1, MXM2, respectively; all 1.0 mm, all p < 0.05); less contraction of the MXP2 and MXM1 (0.7 mm, p < 0.05; 0.9 mm, p < 0.001); less mesial-in rotation of the MXM1 and MXM2 (2.6°, 2.5°, all p < 0.05); and less decrease of the inter-MXP2, MXM1, and MXM2 widths (1.8 mm, 1.5 mm, 2.0 mm, all p < 0.05). In treatment of CII div.1 malocclusion, OA provided better anchorage and less arch-dimension change in the maxillary posterior teeth than CA during en-masse retraction of the maxillary anterior teeth.

Palatal Injection for the Removal of Maxillary Teeth: Current Practice Among Oral and Maxillofacial Surgeons.

PubMed

Badenoch-Jones, Emma K; David, Michael; Lincoln, Trent

2017-07-01

Conventional teaching regarding palatal injection for the removal of maxillary teeth dictates the administration of buccal and palatal injections. Recently, some investigators have questioned the necessity of the palatal injection, suggesting that contemporary local anesthetics might diffuse sufficiently across the buccopalatal cortical bone distance. It has been suggested that because the buccopalatal cortical bone distance increases anteriorly to posteriorly in the maxilla, the success of maxillary extractions with buccal injection only might be related to the anteroposterior position of the tooth. Evidence from clinical trials has only recently become available. Since 2006, 15 clinical trials that examined outcomes of maxillary tooth extractions performed with buccal injection of local anesthetic only have been published. However, there are limited data available on the clinical practice of surgeons. An online survey was sent to 276 full members of the Canadian Association of Oral and Maxillofacial Surgeons. Respondents were asked about their use of palatal injection for the removal of maxillary teeth under local anesthesia, including how often they administer a palatal injection for maxillary extractions in each region of the maxilla. Ninety-two responses were received (33%). Most practitioners deliver a palatal injection for every maxillary tooth extraction under local anesthesia. However, there is a substantial number who do not always administer a palatal injection (ie, they give it "most of the time," "occasionally," or "never"). This number decreased in a linear fashion anteriorly to posteriorly in the maxilla (incisors, 17 of 89; canines, 16 of 88; premolars, 13 of 88; first and second molars, 10 of 89; third molars, 10 of 88). Some surgeons who do not always administer a palatal injection for extraction of maxillary teeth under local anesthesia. The number is larger for anterior compared with posterior teeth. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Treatment effects of a fixed intermaxillary device to correct class II malocclusions in growing patients.

PubMed

Heinrichs, Dean A; Shammaa, Imad; Martin, Chris; Razmus, Thomas; Gunel, Erdogan; Ngan, Peter

2014-01-01

The objective of this study was to evaluate the treatment effects of Forsus™ Fatigue Resistant Device (FRD; 3M Unitek, Monrovia, CA, USA) in growing patients with Class II non-extraction malocclusions. A retrospective sample of 24 class II patients treated consecutively with the FRD followed by comprehensive orthodontic treatment was compared to a sample of untreated control subjects from the Bolton Brush Study who was matched in age, sex, and craniofacial morphology. Lateral cephalometric radiographs were taken before treatment (T1) and after removal of fixed appliances (T2). Growth changes were subtracted from the treatment changes to obtain the treatment effects of the appliance. Data were analyzed using ANOVA and a match paired t test. Significant differences were found between the treated and control groups for 12 of the 29 measured variables (Co-Gn minus Co-Apt, Wits, Is-OLp, Ii-OLp, overjet, Mi-OLp, molar relationship, overbite, Mic-ML, SNA, ANB, and Ii-ML). With 27.8 months of treatment, all patients were corrected to a class I dental arch relationship. Overjet and molar relationships were improved by an average of 4.7 and 3.1 mm, respectively. This was contributed by a 1.2 mm of restraint in forward maxillary growth, 0.7 mm of forward movement of the mandible, 1.5 mm of backward movement of the maxillary incisors, 1.3 mm forward movement of the mandibular incisors, 0.5 mm backward movement of the maxillary molars, and 1.3 mm of forward movement of the mandibular molars. The overbite was decreased by 2 mm with no significant change in the occlusal, palatal, or mandibular plane. Individual variations in response to the FRD treatment were large for most of the parameters tested. Significant differences in treatment changes between male and female subjects were found only in a few parameters measured. These results demonstrate that significant overjet and overbite corrections can be obtained with the Forsus FRD in conjunction with comprehensive orthodontic treatment.

Invasive cervical resorption and the oro-facial cleft patient: a review and case series.

PubMed

O'Mahony, A; McNamara, C; Ireland, A; Sandy, J; Puryer, J

2017-05-12

Introduction Invasive cervical resorption (ICR) has an unknown aetiology, yet it exhibits very aggressive behaviour compared with typical external root resorption, posing a high risk of tooth loss.Aim To investigate the number of patients at the Dublin Cleft Prosthodontic Department with an oro-facial cleft who experienced ICR and to identify any possible aetiological factors.Materials and method A retrospective investigation of all oro-facial cleft patients treated at the Dublin Cleft Prosthodontic Department, St James's Hospital, Dublin. All patients' clinical and radiological records were reviewed. Patients where tooth loss became inevitable due to Class 4 ICR were analysed.Results From 588 oro-facial cleft patients, 14 (2.38%) patients with ICR were identified. Of these eight (57%) were female and six (43%) were male. Mean age at diagnosis was 28 years (range = 16-49 years). Cleft type: six (42.1%) unilateral cleft lip and palate, eight (57.9%) bilateral cleft lip and palate. Seventeen ICR affected teeth in total, with eleven (65%) maxillary central incisors, two (12%) maxillary lateral incisors, four (23%) maxillary canines, and one (7%) central, lateral and canine affected. Some, (N = 10, 71.4%) presented with ICR resulting in immediate tooth loss. Other patients (N = 4, 28.6%) developed ICR during or following prosthodontic treatment at the Cleft Centre. Tooth loss for this cohort, though not immediate, was inevitable. All had undergone fixed orthodontic appliance treatment and twelve had received dento-alveolar bone grafts. A number (N = 7, 50%) had undergone osteotomy, two (14%) had received night guard vital dental whitening and one had a history of trauma.Conclusions ICR, given its aggressive nature and ill-understood aetiology, poses significant treatment challenges. The most severe form of ICR (Class 4) leads inevitably to tooth loss. The slow-moderate progression of ICR may explain the late presentation found in this study, reinforcing the importance of long-term follow-up of this special dental care group.

[Three-dimensional analysis of the early correction of anterior crossbite using eruption guidance appliance].

PubMed

Wang, X; Zhang, J J; Yuan, F S; Wang, Y; Li, C H; Varrela, J E; Yue, J; Ge, L H

2018-06-18

To investigate the clinical effect of eruption guidance appliance in the treatment of anterior cross bite in mixed-dentition children. In the study,10 mixed-dentition children with anterior cross bite, totally 12 incisors, were selected. Alginate was used to take upper and lower dentition impression and make a hard plaster model,which served as the eruption guidance appliance for treatment. The pre- and post-operative dental casts were digitized with SmartOptics Activity 880 scanner,and the three-dimensional overlapping models were obtained by reverse engineering software,Geomagic Studio 2012,then the three-dimensional movements of the upper and lower incisors were analyzed using Imageware 13.2 software. The overbite and overjet were analyzed using the same methods. Measurement with copper wire was used to analyze the upper and lower arch length. Space analysis was the result by the sum of crown width minus the arch length. The crown width of unerupted permanent teeth was according to X-ray method to predict. The SPSS 17.0 software was used to analyze the pre- and post-operative measurements of the same child. The normality test of the measured data showed that it conformed to the normal distribution. Therefore,the t test and double side test were used,and the significance level was 0.05. The course of treatment was (5.6±2.7) months. During orthodontic treatment, the upper incisors moved mainly labially (P<0.001) in three-dimensional displacement, and the lower incisors moved mainly the same direction (P=0.025). During the treatment of eruption guidance appliance,the average overbite decreased (1.01±0.9) mm (t=-3.531, P=0.006), and the difference was statistically significant. There was no statistically significant difference between the pre- and post-operative average overjet (t=0.771, P=0.460). The severity of crowding in upper arch decreased (1.9±0.99) mm (t=-6.042, P<0.001),and that in lower arch decreased (1.9±0.74) mm (t=-8.143, P<0.001), both of the differences were statistically significant. The anterior cross bite in mixed dentition could be corrected by eruption guidance appliance, and at the same time, the normal overjet and overbite were established, and the teeth were aligned.

Accelerated enamel mineralization in Dspp mutant mice

PubMed Central

Verdelis, Kostas; Szabo-Rogers, Heather L.; Xu, Yang; Chong, Rong; Kang, Ryan; Cusack, Brian J.; Jani, Priyam; Boskey, Adele L.; Qin, Chunlin; Beniash, Elia

2016-01-01

Dentin sialophosphoprotein (DSPP) is one of the major non-collagenous proteins present in dentin, cementum and alveolar bone; it is also transiently expressed by ameloblasts. In humans many mutations have been found in DSPP and are associated with two autosomal-dominant genetic diseases — dentinogenesis imperfecta II (DGI-II) and dentin dysplasia (DD). Both disorders result in the development of hypomineralized and mechanically compromised teeth. The erupted mature molars of Dspp–/– mice have a severe hypomineralized dentin phenotype. Since dentin and enamel formations are interdependent, we decided to investigate the process of enamel onset mineralization in young Dspp–/– animals. We focused our analysis on the constantly erupting mouse incisor, to capture all of the stages of odontogenesis in one tooth, and the unerupted first molars. Using high-resolution microCT, we revealed that the onset of enamel matrix deposition occurs closer to the cervical loop and both secretion and maturation of enamel are accelerated in Dspp–/– incisors compared to the Dspp+/– control. Importantly, these differences did not translate into major phenotypic differences in mature enamel in terms of the structural organization, mineral density or hardness. The only observable difference was the reduction in thickness of the outer enamel layer, while the total enamel thickness remained unchanged. We also observed a compromised dentin-enamel junction, leading to delamination between the dentin and enamel layers. The odontoblast processes were widened and lacked branching near the DEJ. Finally, for the first time we demonstrate expression of Dspp mRNA in secretory ameloblasts. In summary, our data show that DSPP is important for normal mineralization of both dentin and enamel. PMID:26780724

Evaluation of Class II treatment by cephalometric regional superpositions versus conventional measurements.

PubMed

Efstratiadis, Stella; Baumrind, Sheldon; Shofer, Frances; Jacobsson-Hunt, Ulla; Laster, Larry; Ghafari, Joseph

2005-11-01

The aims of this study were (1) to evaluate cephalometric changes in subjects with Class II Division 1 malocclusion who were treated with headgear (HG) or Fränkel function regulator (FR) and (2) to compare findings from regional superpositions of cephalometric structures with those from conventional cephalometric measurements. Cephalographs were taken at baseline, after 1 year, and after 2 years of 65 children enrolled in a prospective randomized clinical trial. The spatial location of the landmarks derived from regional superpositions was evaluated in a coordinate system oriented on natural head position. The superpositions included the best anatomic fit of the anterior cranial base, maxillary base, and mandibular structures. Both the HG and the FR were effective in correcting the distoclusion, and they generated enhanced differential growth between the jaws. Differences between cranial and maxillary superpositions regarding mandibular displacement (Point B, pogonion, gnathion, menton) were noted: the HG had a more horizontal vector on maxillary superposition that was also greater (.0001 < P < .05) than the horizontal displacement observed with the FR. This discrepancy appeared to be related to (1) the clockwise (backward) rotation of the palatal and mandibular planes observed with the HG; the palatal plane's rotation, which was transferred through the occlusion to the mandibular plane, was factored out on maxillary superposition; and (2) the interaction between the inclination of the maxillary incisors and the forward movement of the mandible during growth. Findings from superpositions agreed with conventional angular and linear measurements regarding the basic conclusions for the primary effects of HG and FR. However, the results suggest that inferences of mandibular displacement are more reliable from maxillary than cranial superposition when evaluating occlusal changes during treatment.

Radiological and clinical difficulties in the management of chronic maxillary sinusitis in β Thalassemic paediatric patients.

PubMed

Di Mauro, R; Greco, L; Melis, M; Manenti, G; Floris, R; Giacomini, P G; Di Girolamo, M; Di Girolamo, S

2016-05-01

Beta thalassemia is a blood dyscrasia that caused a marked expansion of active marrow spaces and extramedullary haematopoiesis results. In these patients various alterations and abnormalities affects different body areas, including increased risk of sinusitis. The marrow expansion in the facial bones results in delay in pneumatisation of the sinuses, overgrowth of the maxillae, and forward displacement of the upper incisors with skeletal deformities. In current literature, maxillary sinuses are not deeply evaluated by CT scan studies in these kind of patients. The aim of our study was to investigate the presence of maxillary sinuses abnormalities by the use of CT in patients with beta-thalassemia major and to compare these findings with a control group free from this disease. A retrospective analysis of 22 paediatric patients with beta-thalassemia major and 22 control subjects without sinonasal diseases was performed. CT was done using a 64-multidetector-row CT scanner without contrast injection, obtained in axial plane using thin-slice technique. Evaluated parameters were: bone thickness of the lateral and anterior wall, density and volume of the maxillary sinuses. Significant difference was found between the study group and control group in the evaluation of all the parameters examined. The maxillary sinus of β thalassemic patients was smaller respect of controls, the bone was more dense and thick in the side and anterior wall. Beta-thalassemic patients have a relative risk of 2.87 to develop a maxillary sinusitis. In these patients there is an increased incidence of sinonasal infections due to the abnormal development of cranio facial skeleton. These bone alterations might confuse the physicians and lead to an increased rate of sinusitis diagnoses. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Relationship between fracture of mandibular condyle and absence of unerupted mandibular third molar-a retrospective study.

PubMed

Rajan, Ritesh; Verma, Dinesh Kumar; Borle, R M; Yadav, Abhilasha

2016-06-01

The purpose of the present study was to find, if there exists, a co-relation between presence of unerupted mandibular third molar and fracture of mandibular condyle. A retrospective, multicenter study was done collecting the data of all mandibular condyle fractures treated from November 2006 till August 2015. Data was collected from the patient's records and radiographs for the following information: age, sex, etiology of fracture, presence and state of lower third molars, and associated fracture. The results were subjected to statistical analysis. Out of 180 patients of condylar fracture, unerupted third molars were present in 35 (19.44 %) cases compared to 145 (80.55 %) cases of condylar fracture where the unerupted third molars were not present. The difference was statistically significant (p < 0.05). In the unerupted third molar present group, isolated bilateral condylar fracture was seen in 4 (11.4 %) cases, bilateral condylar fracture associated with other mandibular fractures in 9 (25.7 %) cases, isolated unilateral condylar fracture in 0 (0.0 %) cases, and unilateral condylar fracture associated with other mandibular fractures in 17 (48.5 %) cases and condylar fracture associated with mid face fractures in 5 (14.2 %) cases. In the unerupted third molar absent group, isolated bilateral condylar fracture was seen in 5 (3.4 %) cases, bilateral condylar fracture associated with other mandibular fractures in 30 (20.6 %) cases, isolated unilateral condylar fracture in 24 (16.5 %) cases, unilateral condylar fracture associated with other mandibular fractures in 73 (50.34 %) cases, and condylar fracture associated with mid face fractures in 13(8.96 %) cases. The difference between the groups was statistically significant (p = 0.032). This study suggests that the fractures of mandibular condylar region have a significantly higher incidence in patients without an unerupted mandibular third molar.

Stress distributions in maxillary central incisors restored with various types of post materials and designs.

PubMed

Madfa, A A; Kadir, M R Abdul; Kashani, J; Saidin, S; Sulaiman, E; Marhazlinda, J; Rahbari, R; Abdullah, B J J; Abdullah, H; Abu Kasim, N H

2014-07-01

Different dental post designs and materials affect the stability of restoration of a tooth. This study aimed to analyse and compare the stability of two shapes of dental posts (parallel-sided and tapered) made of five different materials (titanium, zirconia, carbon fibre and glass fibre) by investigating their stress transfer through the finite element (FE) method. Ten three-dimensional (3D) FE models of a maxillary central incisor restored with two different designs and five different materials were constructed. An oblique loading of 100 N was applied to each 3D model. Analyses along the centre of the post, the crown-cement/core and the post-cement/dentine interfaces were computed, and the means were calculated. One-way ANOVAs followed by post hoc tests were used to evaluate the effectiveness of the post materials and designs (p=0.05). For post designs, the tapered posts introduced significantly higher stress compared with the parallel-sided post (p<0.05), especially along the centre of the post. Of the materials, the highest level of stress was found for stainless steel, followed by zirconia, titanium, glass fibre and carbon fibre posts (p<0.05). The carbon and glass fibre posts reduced the stress distribution at the middle and apical part of the posts compared with the stainless steel, zirconia and titanium posts. The opposite results were observed at the crown-cement/core interface. Copyright © 2014 IPEM. Published by Elsevier Ltd. All rights reserved.

Prevalence of dental erosion and association with lifestyle factors in Swedish 20-year olds.

PubMed

Isaksson, Helén; Birkhed, Dowen; Wendt, Lill-Kari; Alm, Anita; Nilsson, Mats; Koch, Göran

2014-08-01

To investigate the prevalence, distribution and severity of dental erosion and its association with lifestyle, oral and general health in young adults. Four hundred and ninety-four individuals, 20-years of age, participated. Dental erosion in molars and maxillary incisors was evaluated. Caries, plaque and gingivitis were registered. Saliva samples were taken and the subjects were interviewed about behavioural and dietary habits and oral and general health. Body mass index (BMI) was calculated. The individuals were sub-divided into two groups according to the presence and absence of dental erosion: within the group with erosion was a sub-group of individuals with extensive erosion. Of the individuals 25% had no erosion, 75% had erosion and 18% had extensive erosion. Erosion was found in molars in 74% of the individuals and on buccal and palatal surfaces in maxillary incisors in 4% and 7%, respectively. Cupping was seen in 65% of individuals and severe erosion in molars in 1.6%. Compared to subjects with no erosion, those with extensive erosion had a higher consumption of soft drinks (p = 0.05), caries prevalence (p < 0.01), prevalence of mutans Streptococci (p < 0.01) and BMI (p < 0.05). Furthermore, subjects with erosion had higher caries prevalence (p < 0.01) and BMI (p < 0.01) than those with no erosion. Swedish young adults have a high prevalence of dental erosion, but the level of severe erosion is low. The study disclosed a relationship between dental erosion and behavioural factors, oral health and BMI.

A case of nasal septal abscess caused by medication related osteonecrosis in breast cancer patient.

PubMed

Maeda, Mayuka; Matsunobu, Takeshi; Kurioka, Takaomi; Kurita, Akihiro; Shiotani, Akihiro

2016-02-01

Antiresorptive drugs have been widely used to treat patients with hypercalcemia caused by malignancy, bone metastasis, multiple myeloma, and osteoporosis. However, it is well known that antiresorptive drugs can cause osteonecrosis of the jaw (ONJ). Herein, we report a rare case of nasal septal abscess caused by medication related osteonecrosis of the jaw (MRONJ) in a breast cancer patient. A 69-year-old woman was referred to our clinic for evaluation of nasal obstruction. Physical examination revealed a cherry-like swelling of the nasal mucosa emanating from the septum that obstructed both nasal cavities and a fistulous tract showing pus discharge after extraction of the bilateral maxillary central incisors (MCI) and the right maxillary lateral incisor (MLI). Computed tomography and panoramic radiography revealed extensive osteonecrosis of the maxilla and swelling of the nasal mucosa. The clinical diagnosis was nasal septal abscess caused by osteonecrosis of the maxilla. Surgical procedure was undertaken for this case. An indwelling drain was placed in the oral cavity, and sequestrectomy was performed with incision and drainage of the anterior portion of left nasal septum. The patient was doing well at the 7-month follow-up. The patient had a medical history of breast cancer with bone, lung, liver metastases, and had received intravenous bisphosphonate, which is one of the antiresorptive medicines, over the past 4 years. We suspect that this history played an important role in MRONJ induced nasal septal abscess. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

The Effect of Resection Angle on Stress Distribution after Root-End Surgery

PubMed Central

Monteiro, Jaiane Bandoli; Dal Piva, Amanda Maria de Oliveira; Tribst, João Paulo Mendes; Borges, Alexandre Luiz Souto; Tango, Rubens Nisie

2018-01-01

Introduction: This study aimed to investigate the influence of the resection angle on the stress distribution of retrograde endodontic treated maxillary incisors under oblique-load application. Methods and Materials: A maxillary central incisor which was endodontically treated and restored with a fiber glass post was obtained in a 3-dimensional numerical model and distributed into three groups according to type of resection: control; restored with fiber post without retrograde obturation, R45 and R90 with 45º and 90º resection from tooth axial axis, respectively and restored with Fuji II LC (GC America). The numerical models received a 45º occlusal load of 200 N/cm2 on the middle of lingual surface. All materials and structures were considered linear elastic, homogeneous and isotropic. Numerical models were plotted and meshed with isoparametric elements, and the results were analyzed using maximum principal stress (MPS). Results: MPS showed greater stress values in the bone tissue for control group than the other groups. Groups with apicectomy showed acceptable stress distribution on the fiber post, cement layer and root dentin, presenting more improved values than control group. Conclusion: Apicectomy at 90º promotes more homogeneity on stress distribution on the fiber post, cement layer and root dentin, which suggests less probability of failure. However, due to its facility and stress distribution also being better than control group, apicectomy at 45° could be a good choice for clinicians. PMID:29707013

Surgical removal of coronal fragment of tooth embedded in lower lip and esthetic management of fractured crown segment.

PubMed

Avinash, Alok; Dubey, Alok; Singh, Rajeev Kumar; Prasad, Swati

2014-01-01

Dental fractures of the permanent maxillary anterior teeth are relatively frequent accidents during childhood. The Efficient diagnosis and treatment of dental injury are important elements in clinical dentistry. This article describes a case of trauma in permanent right central maxillary incisors with tooth fragments embedded in the lower lip. Thorough clinical examination followed by soft tissue radiographs confirmed the presence of a fractured incisal fragment, which was surgically retrieved under local anesthesia. Direct composite restoration was placed. After finishing and polishing, an esthetic and natural-looking restoration was achieved; this completely satisfied the functional and esthetic expectation of the patient and dental team. How to cite this article: Avinash A, Dubey A, Singh RK, Prasad S. Surgical Removal of Coronal Fragment of Tooth Embedded in Lower Lip and Esthetic Management of Fractured Crown Segment. Int J Clin Pediatr Dent 2014;7(1):65-68.

Optimizing pediatric interdental fixation by use of a paramedian palatal fixation site.

PubMed

McNichols, Colton H; Hatef, Daniel A; Cole, Patrick D; Hollier, Larry H

2012-03-01

Condylar fractures are the most common injury seen in pediatric mandibular trauma. These injuries often cannot be adequately stabilized by conservative techniques such as splinting. The pediatric condyle fracture often requires a period of intermaxillary fixation. Because of the characteristics of the developing dentition, circumdental wiring is often not possible. Surgeons commonly achieve interdental stabilization by the connection of a circum-mandibular wire and a second wire placed through a drill hole in the piriform aperture. This method can be problematic in the young patient whose palatal suture is still patent. In this brief technical note, the use of a paramedian drill hole through the palate posterior to the maxillary incisors is described. It is believed that this method is superior to other techniques because it avoids injury to the deciduous tooth buds and allows for the maxillary wire to be seated in more structurally sound tissues.

SEGMENTAL LEFORT I OSTEOTOMY FOR TREATMENT OF A CLASS III MALOCCLUSION WITH TEMPOROMANDIBULAR DISORDER

PubMed Central

Janson, Marcos; Janson, Guilherme; Sant'Ana, Eduardo; Nakamura, Alexandre; de Freitas, Marcos Roberto

2008-01-01

This article reports the case of a 19-year-old young man with Class III malocclusion and posterior crossbite with concerns about temporomandibular disorder (TMD), esthetics and functional problems. Surgical-orthodontic treatment was carried out by decompensation of the mandibular incisors and segmentation of the maxilla in 4 pieces, which allowed expansion and advancement. Remission of the signs and symptoms occurred after surgical-orthodontic intervention. The maxillary dental arch presented normal transverse dimension. Satisfactory static and functional occlusion and esthetic results were achieved and remained stable. Three years after the surgical-orthodontic treatment, no TMD sign or symptom was observed and the occlusal results had not changed. When vertical or horizontal movements of the maxilla in the presence of moderate maxillary constriction are necessary, segmental LeFort I osteotomy can be an important part of treatment planning. PMID:19089265

Combined Orthodontic-surgical Treatment for Skeletal Class III Malocclusion with Multiple Impacted Permanent and Supernumerary Teeth: Case Report.

PubMed

Xue, Dai Juan And Feng

2014-01-01

In this report we describe a combined orthodontic and surgical treatment for a 14-year-old boy with severe skeletal class III deformity and dental problem. His upper posterior primary teeth in the left side were over-retained and 6 maxillary teeth (bilateral central incisors and canines, left first and second premolars) were impacted, together with 5 supernumerary teeth in both arches. The treatment protocol involved extraction of all the supernumerary and deciduous teeth, surgical exposure and orthodontic traction of the impacted teeth, a bimaxillary orthognathic approach including Lefort I osteotomy. Bilateral sagittal split ramus osteotomy (BSSRO) and genioplasty was performed to correct skeletal problem. After treatment, all of the impacted teeth were brought to proper alignment in the maxillary arch. A satisfied profile and good posterior occlusion was achieved. Treatment mechanics and consideration during different stages are discussed.

Surgical Orthodontic Treatment of Severe Skeletal Class II

PubMed Central

Alsulaimani, Fahad F.; Al-Sebaei, Maisa O.; Afify, Ahmed R.

2013-01-01

This paper describes an adult Saudi male patient who presented with a severe skeletal class II deformity. The case was managed with a combination of presurgical orthodontic treatment followed by a double jaw orthognathic surgery and then another phase of orthodontic treatment for final occlusal detailing. Extraction of the four first premolars was done during the presurgical orthodontic phase of treatment to decompensate upper and lower incisors and to give room for surgical setback of the maxillary anterior segment. Double jaw surgery was performed: bilateral sagittal split ramus osteotomy for 8 mm mandibular advancement combined with three-piece Le Fort I maxillary osteotomy, 6 mm setback of the anterior segment, 8 mm impaction of the maxilla, and 5 mm advancement genioplasty. Although the anteroposterior discrepancy and the facial convexity were so severe, highly acceptable results were obtained, both esthetically as well as occlusally. PMID:23573428

Third molars and premolars extraction in conventional orthodontics and in treatments based on maxillary bone remodeling with temporary anchorage: indications and care.

PubMed

Consolaro, Alberto

2017-02-01

A bone is an anatomic structure in constant remodeling, with different, mutant and wonderfully inconstant designs. With every new and immediate functional demand, there are changes in cortical thickness, trabecular bone density and also in direction and size of trabeculae. Bones' non-stopping search is for adjusting to the functions induced by forces and movements required by a certain life style. Conventional orthodontic planning or with temporary anchorage based on bone remodeling takes into consideration the spaces that are - or may be - occupied by the teeth, in the formation of a functional and esthetic dental arch for the patient. In case it is necessary to extract a tooth and the options are the third molars, partially or totally unerupted, and teeth that belong to other dental groups, obviousness recommends - due to mouth anatomy and physiology, as well as pathologic reasons - extracting the third molars, due to of the several reasons described in the present study.

Third molars and premolars extraction in conventional orthodontics and in treatments based on maxillary bone remodeling with temporary anchorage: indications and care

PubMed Central

Consolaro, Alberto

2017-01-01

ABSTRACT A bone is an anatomic structure in constant remodeling, with different, mutant and wonderfully inconstant designs. With every new and immediate functional demand, there are changes in cortical thickness, trabecular bone density and also in direction and size of trabeculae. Bones' non-stopping search is for adjusting to the functions induced by forces and movements required by a certain life style. Conventional orthodontic planning or with temporary anchorage based on bone remodeling takes into consideration the spaces that are - or may be - occupied by the teeth, in the formation of a functional and esthetic dental arch for the patient. In case it is necessary to extract a tooth and the options are the third molars, partially or totally unerupted, and teeth that belong to other dental groups, obviousness recommends - due to mouth anatomy and physiology, as well as pathologic reasons - extracting the third molars, due to of the several reasons described in the present study. PMID:28444013

Predictors of favorable soft tissue profile outcomes following Class II Twin-block treatment

PubMed Central

Kim, Ji-Eun; Mah, Su-Jung; Kim, Tae-Woo; Kim, Su-Jung; Park, Ki-Ho

2018-01-01

Objective The aim of this study was to determine cephalometric factors that help predict favorable soft-tissue profile outcomes following treatment with the Class II Twin-block appliance. Methods Pre- and post-treatment lateral cephalograms of 45 patients treated with the Class II Twin-block appliance were retrospectively analyzed. Profile silhouettes were drawn from the cephalograms and evaluated by three orthodontists in order to determine the extent of improvement. Samples were divided into a favorable group (upper 30% of visual analogue scale [VAS] scores, n = 14) and an unfavorable group (lower 30% of VAS scores, n = 14). Skeletal and soft-tissue measurements were performed on the cephalograms and an intergroup comparison was conducted. Results An independent t-test revealed that the following pre-treatment values were lower in the favorable group compared to the unfavorable group: lower incisor to mandibular plane angle, lower incisor to pogonion distance, point A-nasion-point B angle, sella-nasion line (SN) to maxillary plane angle, SN to mandibular plane angle, gonial angle, and symphysis inclination. The favorable group had a larger incisor inclination to occlusal plane. Moreover, the favorable group showed larger post-treatment changes in gonial angle, B point projection, and pogonion projection than did the unfavorable group. Conclusions Class II malocclusion patients with a low divergent skeletal pattern and reduced lower incisor protrusions are likely to show more improvement in soft-tissue profile outcomes following Class II Twin-block treatment. PMID:29291184

Outcomes and stability in patients with anterior open bite and long anterior face height treated with temporary anchorage devices and a maxillary intrusion splint

PubMed Central

Scheffler, Nicole R.; Proffit, William R.; Phillips, Ceib

2015-01-01

Introduction Temporary skeletal anchorage devices now offer the possibility of closing anterior open bites and decreasing anterior face height by intruding maxillary posterior teeth, but data for treatment outcomes are lacking. This article presents outcomes and posttreatment changes for consecutive patients treated with a standardized technique. Methods The sample included 33 consecutive patients who had intrusion of maxillary posterior teeth with a maxillary occlusal splint and nickel-titanium coil springs to temporary anchorage devices in the zygomatic buttress area, buccal and apical to the maxillary molars. Of this group, 30 had adequate cephalograms available for the period of treatment, 27 had cephalograms including 1-year posttreatment, and 25 had cephalograms from 2 years or longer. Results During splint therapy, the mean molar intrusion was 2.3 mm. The mean decrease in anterior face height was 1.6 mm, less than expected because of a 0.6-mm mean eruption of the mandibular molars. During the postintrusion orthodontics, the mean change in maxillary molar position was a 0.2-mm extrusion, and there was a mean 0.5-mm increase in face height. Positive overbite was maintained in all patients, with a slight elongation (<2 mm) of the incisors contributing to this. During the 1 year of posttreatment retention, the mean changes were a further eruption of 0.5 mm of the maxillary molars, whereas the mandibular molars intruded by 0.6 mm, and there was a small decrease in anterior face height. Changes beyond 1 year posttreatment were small and attributable to growth rather than relapse in tooth positions. Conclusions Intrusion of the maxillary posterior teeth can give satisfactory correction of moderately severe anterior open bites, but 0.5 to 1.5 mm of reeruption of these teeth is likely to occur. Controlling the vertical position of the mandibular molars so that they do not erupt as the maxillary teeth are intruded is important in obtaining a decrease in face height. PMID:25439210

Three-dimensional finite element analysis of the application of attachment for obturator framework in unilateral maxillary defect.

PubMed

Sun, J; Jiao, T; Tie, Y; Wang, D-M

2008-09-01

The aim of this study was to evaluate the stress on the abutment teeth and framework ina unilateral maxillary defect which was restored by an obturator retained by resin-bonded extra coronal attachment. A three-dimensional finite element model of the human unilateral maxillary defect was constructed. Traditional obturator framework with four casting circumferential clasp was established (model 1). A continuous lingual guide plane of 0.5 mm thickness on all of the remaining teeth, with Mini-SG/F attachment on the mesial surface of the central incisor was also established (model 2). The modelling and analytical processes were performed using the ANSYS technologies. Stress was transmitted to the anterior part of the palate, with stress values being lower on the anterior teeth compared with the posteriors. The highest stress value of model 1 and model 2 was 13.1 Mpa, 19.9 Mpa respectively. Stress concentrations were found at the junction of the attachment to the lingual guide plane and the anterior part of the lingual plane. The results of this study suggest that the application of a resin-bonded extra coronal attachment for obturator retention is in accordance with the design principles for the restorative treatment of maxillary defects.The design of the attachment framework needs to be further investigated. Benefit can be gained by splinting the abutment teeth.

Effect of isotretinoin on tooth germ and palate development in mouse embryos.

PubMed

Balducci-Roslindo, E; Silvério, K G; Jorge, M A; Gonzaga, H F

2001-01-01

Vitamin A and its derivatives, retinoic acid, tretinoin and isotretinoin, are currently used in dermatological treatments. The administration of high doses of this vitamin provokes congenital malformations in mice: cleft palate, maxillary and mandibular hypoplasia and total or partial fusion of the maxillary incisors. This study compares the tooth germs of the first maxillary and mandibular molars of fetal mice submitted to isotretinoin during organogenesis. Twelve 60-day-old female Mus musculus were divided into two groups on the 7th day of pregnancy: treated group--1 mg isotretinoin per kg body weight, dissolved in vegetable oil, was administered from the 7th to the 13th day of pregnancy; control group--vegetable oil in equivalent volume was administered orally for the same period. On the 16th day of pregnancy, the females were sacrificed, the fetuses were removed and their heads amputated. After standard laboratory procedures, 6-micron thick serial slices were stained with hematoxylin and eosin for optical microscopy examination. The results showed that both groups had closed palates with no reminiscence of epithelial cells; however, the first molar germs of the isotretinoin-treated animals showed delayed development compared to the control animals.

Skeletal and dental changes in the sagittal, vertical, and transverse dimensions after rapid palatal expansion.

PubMed

Chung, Chun-Hsi; Font, Blanca

2004-11-01

The purpose of this study was to examine the maxillary and mandibular responses to rapid palatal expansion (RPE) in all 3 dimensions. Twenty children (average age, 11.7 years) who required RPE treatment were included in this study. Pre- (T1) and post-RPE (T2) lateral and posteroanterior (PA) cephalograms and study models were taken for all patients. For each patient, lateral and PA cephalograms at T1 and T2 were traced, and the sagittal, vertical, and transverse measurements were made. In addition, on the pre- and postexpansion models, the widths between the first premolars, the first molars, and the two acrylic halves of the Haas-type expander were measured. Results showed that from T1 to T2, the mean SNA increased 0.35 degrees (P < .05) and ANB increased 1.00 degrees (P < .05). Both the ANS and PNS moved downward (1.30 mm and 1.43 mm, respectively, P < .05), and the mandibular plane angle (MP-SN) increased 1.72 degrees (P < .05). The maxillary and mandibular incisors did not change significantly after RPE. After RPE, the mean increase of maxillary interpremolar width, maxillary intermolar width, maxillary width (J-J), nasal width, and interorbital width were found to be 110.7%, 104.5%, 30.1%, 23.1%, and 3.3% of the screw expansion, respectively. After RPE treatment in children, the maxilla displaced slightly forward and downward (P < .05); the mandible rotated downward and backward, and the anterior facial height increased significantly (P < .05); and the widths of the maxilla and nasal cavity increased significantly (P < .05).

Effects of zygoma-gear appliance for unilateral maxillary molar distalization: A prospective clinical study.

PubMed

Kilkis, Dogan; Celikoglu, Mevlut; Nur, Metin; Bayram, Mehmet; Candirli, Celal

2016-12-01

The aim of the study was to evaluate the dentoskeletal effects of the zygoma-gear appliance used for unilateral maxillary molar distalization in patients with Class II subdivision malocclusion. This prospective clinical study consisted of 21 patients (9 boys, 12 girls; mean age, 15.68 ± 2.18 years) with unilateral Class II malocclusion treated using the unilateral zygoma-gear appliance supported by a zygomatic miniplate inserted on the Class II malocclusion side. The dentoskeletal effects of the system were evaluated using cephalometric lateral and panoramic films with a paired t test. The mean amount of distalization for the maxillary first molar was found to be 5.31 ± 2.46 mm (P <0.001) in 0.45 ± 0.12 years, showing an amount of 0.98 mm of distalization per month. It was also accompanied by a slight intrusion (0.76 ± 2.85 mm; P >0.05) and distal tipping (6.39° ± 5.39°; P <0.001) of the maxillary molars. The maxillary premolar also spontaneously moved distally 1.63 ± 1.90 mm (P <0.01) with distal tipping (4.05° ± 3.47°; P <0.001). Moreover, the inclination of the maxillary incisors and overjet were decreased (-1.59° ± 1.45°, P <0.001; and -0.29 ± 0.63 mm, P <0.05; respectively) showing no anchorage loss. No statistically significant changes were found for the skeletal and soft tissue measurements (P >0.05). The zygoma-gear appliance system is an effective method for unilateral maxillary molar distalization. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Radiographic localization of unerupted maxillary anterior teeth using the vertical tube shift technique: the history and application of the method with some case reports.

PubMed

Jacobs, S G

1999-10-01

The preferred means of radiographic localization is the parallax method introduced by Clark in 1910. He used 2 periapical radiographs and shifted the tube in the horizontal plane. In 1952, Richards appreciated that a vertical tube shift could also be carried out. No major changes then occurred in the technique until Keur, in Australia, in 1986 replaced the periapical radiographs with occlusal radiographs. This modification enables a greater tube movement and therefore a greater shift of the image of the impacted tooth; it also ensures that the whole of the tooth is captured on the radiograph. For the vertical tube shift, Keur introduced the use of a rotational panoramic radiograph with an occlusal radiograph. In 1987, Southall and Gravely discussed this vertical tube shift combination in the English dental literature, and it is now the preferred combination of radiographs for localizing impacted maxillary anterior teeth. Jacobs introduced this method to the American literature in 1999, but it has yet to gain acceptance in the continental European literature. Jacobs recommended, when using this combination, to routinely increase the vertical angulation for the occlusal radiograph by 10 degrees to achieve a greater image shift. Four case reports are presented in this article. Three have photographs taken at surgical exposure to illustrate how the position of the impacted tooth can be accurately predicted by appropriate interpretation of the radiographs.

Easy come, easy go: a simple and effective orthodontic enamel anchor for endotracheal tube stabilization in a child with extensive facial burns.

PubMed

Sakata, Shinichiro; Hallett, Kerrod B; Brandon, Matthew S; McBride, Craig A

2009-11-01

Endotracheal tube stabilization in patients with facial burns is crucial and often challenging. We present a simple method of securing an endotracheal tube using two orthodontic brackets bonded to the maxillary central incisor teeth and a 0.08'' stainless steel ligature wire. Our technique is less traumatic, and is easier to maintain oral hygiene than with previously described methods. This anchorage system takes 5 min to apply and can be removed on the ward without the need for a general anaesthetic.

Sodium hypochlorite accident in a pediatric patient.

PubMed

Klein, Ulrich; Kleier, Donald J

2013-01-01

A sodium hypochlorite accident is a rare event in adults, but even more so in children. The purposes of this paper were to: report the case of a one-year, 10-month-old toddler who was treated under general anesthesia for early childhood caries, incurred a sodium hypochlorite accident following attempted pulpectomy in his primary maxillary central incisors, but made a full recovery without any sequelae after a typical four to six weeks course of disease; review the pertinent literature; and give recommendations on how to minimize the potential occurrence of such incidents.

Effect of ligation method on maxillary arch force/moment systems for a simulated lingual incisor malalignment.

PubMed

Seru, Surbhi; Romanyk, Dan L; Toogood, Roger W; Carey, Jason P; Major, Paul W

2014-01-01

The objectives of this study were to determine whether there is a difference in the magnitude of forces and moments produced by elastic ligation when compared to passive ligation, and whether these forces and moments propagate differently along the arch for the two ligation types. A lingual incisor malalignment was used in this study. The Orthodontic Simulator (OSIM) was used to quantify the three-dimensional forces and moments applied on the teeth given a lingually displaced incisor. A repeated measures MANOVA was performed to statistically analyze the data. The interaction factor illustrated convincing evidence that there is a difference in maximum force and moment values for all outcome variables between ligation types considering all tooth positions along the arch. The mean differences for FX and FY between ligation types were found to be clinically significant, with values for elastic ligation consistently higher than passive ligation. It was found that the maximum forces and moments produced by elastic ligation are greater than those produced by passive ligation and that the magnitude of this difference for the mesiodistal and buccolingual forces is clinically relevant. Additionally, it was determined that elastic ligation causes forces and moments to propagate further along the arch than passive ligation for all outcome variables.

[Combined surgical-orthodontic therapy for compound odontoma].

PubMed

Dukić, Walter; Kuna, Tihomir; Lapter-Varga, Marina; Jurić, Hrvoje; Lulić-Dukić, Olga

2007-09-01

Odontogenic tumor is a rare condition in dental medicine that mostly proceeds unrecognized until the occurrence of clinical symptoms such as delayed eruption, or is incidentally detected on routine x-ray examination. The exact cause is not known, however, previous dental trauma and infection have been postulated as the potential factors in the development of odontogenic tumor. The earliest possible operative extirpation of the tumorous growth is recommended to eliminate permanent tooth impaction and to enable normal growth of the teeth. In some cases, corticotomy, including complete removal of the bony coat of the tooth, may be needed to additionally facilitate and precipitate its eruption. Orthodontic therapy is also of great importance in correct alignment of the teeth 'n the dental arch as well as in the management of other anomalies that may be associated with odontogenic tumor. A patient with compound odontoma is presented, along with the course of combined surgical-orthodontic therapy. The patient reported previous intrusion trauma that had occurred at the age of 4 years, which may have been the potential factor in the development of odontoma. In this case, there was a massive odontogenic tumor which had compromised the growth of permanent teeth, and the growth impulse was almost at the end since the patient was 11 years old and the apexes of the upper incisors were partially closed. The first operation included complete removal of the tumorous mass that had interrupted spontaneous eruption of the upper permanent incisors. It did not result in immediate spontaneous tooth eruption, so an additional operation was needed. The objective of the second operative procedure was complete removal of the covering bone over the unerupted upper permanent incisors in order to eliminate the physical barrier to tooth growth and eruption. The objective of fixed orthodontic therapy was full eruption of the partially erupted upper incisors. After 16 months, the upper incisors were regularly located in the dental arch. In this case, orthodontic therapy had another objective, i.e. to ensure rotation of the first upper premolar, to provide space for the upper permanent canine eruption and to establish regular intercuspidation after upper second premolar hypodontia. In colclusion, combined operative and orthodontic therapy can be recommended irrespective of the stage of the impacted tooth development because any treatment to precipitate tooth eruption has favorable effects. Impacted teeth should always be provided all treatment options for faster eruption, as demonstrated in our case where a good clinical result was achieved within 2.5 years. The role of regular clinical and x-ray controls for assessment of the impacted tooth eruption should also be emphasized.

Orthodontic treatment of an anterior openbite with the aid of corticotomy procedure: Case report

PubMed Central

Aljhani, Ali S.; Aldrees, Abdullah M.

2010-01-01

This case report illustrates the orthodontic treatment combined with the corticotomy technique in an adult patient to accelerate tooth movement and shorten the treatment time. The patient was a 22-year-old woman with an anterior open bite and flared and spaced upper and lower incisors. First, fixed orthodontic appliances (bidimensional edgewise brackets) were bonded, and a week later buccal and lingual corticotomy with alveolar augmentation procedure in the maxillary arch from the first molar to the contralateral first molar, and from canine to canine in the mandibular arch was performed. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every 2 weeks. The total treatment time was 5 months and no adverse effects were observed at the end of active treatment. The addition of the decortication procedure to the conventional orthodontic therapy decreased the duration of treatment significantly. Successful closure of the anterior open bite with adequate overbite and interdigitation of the teeth were achieved. PMID:24151417

Orthodontic treatment of an anterior openbite with the aid of corticotomy procedure: Case report.

PubMed

Aljhani, Ali S; Aldrees, Abdullah M

2011-04-01

This case report illustrates the orthodontic treatment combined with the corticotomy technique in an adult patient to accelerate tooth movement and shorten the treatment time. The patient was a 22-year-old woman with an anterior open bite and flared and spaced upper and lower incisors. First, fixed orthodontic appliances (bidimensional edgewise brackets) were bonded, and a week later buccal and lingual corticotomy with alveolar augmentation procedure in the maxillary arch from the first molar to the contralateral first molar, and from canine to canine in the mandibular arch was performed. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every 2 weeks. The total treatment time was 5 months and no adverse effects were observed at the end of active treatment. The addition of the decortication procedure to the conventional orthodontic therapy decreased the duration of treatment significantly. Successful closure of the anterior open bite with adequate overbite and interdigitation of the teeth were achieved.

Glass fiber reinforced composite resin as an intracanal post--a clinical study.

PubMed

Subramaniam, Priya; Babu, K L Girish; Sunny, Raju

2008-01-01

Restoration of primary incisors, which have been severely damaged by early childhood caries or trauma, is a difficult task for the pediatric dentist. With the introduction of new adhesive systems and restorative materials, alternative approaches for treating these teeth have been proposed. Ten healthy children aged between 3-4 years who had 28 grossly destructed primary maxillary incisors requiring intra canal retention were selected for the study. Following root canal treatment, either a Glass Fiber Reinforced Composite Resin (GFRCR everStick,, Finland) or an omega shaped stainless steel wire were placed as intracanal posts in these teeth. Flowable composite was used for cementation of posts and also to build up the coronal structure using celluloid strip crowns. Both types of intracanal posts were evaluated for retention and marginal adaptation at 1, 6 and 12 months. The data obtained was subjected to statistical analysis. GFRCR intracanal posts showed better retention and marginal adaptation than omega shaped stainless steel wire posts.

Hunter-Schreger Band patterns in human tooth enamel

PubMed Central

Lynch, Christopher D; O’Sullivan, Victor R; Dockery, Peter; McGillycuddy, Catherine T; Sloan, Alastair J

2010-01-01

Using light microscopy, we examined Hunter-Schreger Band (HSB) patterns on the axial and occlusal/incisal surfaces of 160 human teeth, sectioned in both the buccolingual and mesiodistal planes. We found regional variations in HSB packing densities (number of HSBs per mm of amelodentinal junction length) and patterns throughout the crown of each class of tooth (maxillary and mandibular: incisor, canine, premolar, and molar) examined. HSB packing densities were greatest in areas where functional and occlusal loads are greatest, such as the occlusal surfaces of posterior teeth and the incisal regions of incisors and canines. From this it is possible to infer that the behaviour of ameloblasts forming enamel prisms during amelogenesis is guided by genetic/evolutionary controls that act to increase the fracture and wear resistance of human tooth enamel. It is suggested that HSB packing densities and patterns are important in modern clinical dental treatments, such as the bonding of adhesive restorations to enamel, and in the development of conditions, such as abfraction and cracked tooth syndrome. PMID:20579171

Comparison of three-dimensional orthodontic load systems of different commercial archwires for space closure.

PubMed

Gajda, Steven; Chen, Jie

2012-03-01

To experimentally quantify the effects of the loop design on three-dimensional orthodontic load systems of two types of commercial closing loop archwires: Teardrop and Keyhole. An orthodontic force tester and custom-made dentoform were used to measure the load systems produced on two teeth during simulated space closure. The system included three force components along and three moment components about three clinically defined axes on two target teeth: the left maxillary canine and the lateral incisor. The archwires were attached to the dentoform and were activated following a standard clinical procedure. The resulting six load components produced by the two archwires were reported and compared. The results were also compared with those of the T-loop archwire published previously. The three designs deliver similar loading patterns; however, the component magnitudes are dependent on the design. All of the designs result in lingual tipping of the teeth, canine lingual-mesial displacement, canine crown-mesial-in rotation, and incisor crown-distal-in rotation.

Dental and maxillofacial characteristics of six Japanese individuals with ectrodactyly-ectodermal dysplasia-clefting syndrome.

PubMed

Okamura, Erika; Suda, Naoto; Baba, Yoshiyuki; Fukuoka, Hiroki; Ogawa, Takuya; Ohkuma, Mizue; Ahiko, Nozomi; Yasue, Akihiro; Tengan, Toshimoto; Shiga, Momotoshi; Tsuji, Michiko; Moriyama, Keiji

2013-03-01

Objective : Ectrodactyly-ectodermal dysplasia-clefting syndrome is a congenital anomaly characterized by ectodermal dysplasia, ectrodactyly, cleft lip and palate, and lacrimal duct anomalies. Because this syndrome is frequently accompanied by a congenital lack of teeth, narrow palate, and malocclusion, comprehensive orthodontic intervention is required. Design : To highlight the specific dental and maxillofacial characteristics of ectrodactyly-ectodermal dysplasia-clefting syndrome, six Japanese individuals diagnosed with the syndrome are described here. Patients : The subjects consisted of two boys and four girls (age range, 6.0 to 13.9 years) diagnosed with ectrodactyly-ectodermal dysplasia-clefting syndrome by medical and dental specialists. Their conditions included ectodermal dysplasia (hypodontia, microdontia, enamel hypoplasia, and abnormalities in hair and nails), cleft lip and/or palate, and ectrodactyly. Cephalograms, panoramic x-rays, and dental casts were taken; systemic complications were recorded at the first visit to our dental hospital. Results : All individuals had severe oligodontia with 9 to 18 missing teeth. The missing teeth were mainly maxillary and mandibular incisors and second bicuspids, arranged in a symmetrical manner. Cephalometric analysis showed retruded and short maxilla due to cleft lip and/or palate. It is interesting that all individuals showed a characteristically shaped mandibular symphysis with a retruded point B. It is likely that this unusual symphyseal morphology is due to the lack of mandibular incisors. Conclusions : This study demonstrates the presence of severe oligodontia in the incisal and premolar regions and describes a characteristic maxillary and mandibular structure in Japanese individuals with ectrodactyly-ectodermal dysplasia-clefting syndrome.

Increased occurrence of dental anomalies associated with infraocclusion of deciduous molars.

PubMed

Shalish, Miriam; Peck, Sheldon; Wasserstein, Atalia; Peck, Leena

2010-05-01

To test the null hypothesis that there is no relationship between infraocclusion and the occurrence of other dental anomalies in subjects selected for clear-cut infraocclusion of one or more deciduous molars. The experimental sample consisted of 99 orthodontic patients (43 from Boston, Mass, United States; 56 from Jerusalem, Israel) with at least one deciduous molar in infraocclusion greater than 1 mm vertical discrepancy, measured from the mesial marginal ridge of the first permanent molar. Panoramic radiographs and dental casts were used to determine the presence of other dental anomalies, including agenesis of permanent teeth, microdontia of maxillary lateral incisors, palatally displaced canines (PDC), and distal angulation of the mandibular second premolars (MnP2-DA). Comparative prevalence reference values were utilized and statistical testing was performed using the chi-square test (P < .05) and odds ratio. The studied dental anomalies showed two to seven times greater prevalence in the infraocclusion samples, compared with reported prevalence in reference samples. In most cases, the infraoccluded deciduous molar exfoliated eventually and the underlying premolar erupted spontaneously. In some severe phenotypes (10%), the infraoccluded deciduous molar was extracted and space was regained to allow uncomplicated eruption of the associated premolar. Statistically significant associations were observed between the presence of infraocclusion and the occurrence of tooth agenesis, microdontia of maxillary lateral incisors, PDC, and MnP2-DA. These associations support a hypothesis favoring shared causal genetic factors. Clinically, infraocclusion may be considered an early marker for the development of later appearing dental anomalies, such as tooth agenesis and PDC.

Implant-supported restoration of congenitally missing teeth using cancellous bone block-allografts.

PubMed

Nissan, Joseph; Mardinger, Ofer; Strauss, Morris; Peleg, Michael; Sacco, Roberto; Chaushu, Gavriel

2011-03-01

Patients with congenitally missing teeth may present with undeveloped alveolar bone morphology, making implant reconstruction a challenge. The aim of the present study was to evaluate the outcome of dental implants after ridge augmentation with cancellous freeze-dried block bone allografts in patients with congenitally missing teeth. Twelve patients with a mean age of 21 ± 4 years, were included. Congenitally missing teeth included maxillary lateral incisors, a maxillary canine, and mandibular central and lateral incisors. A bony deficiency of ≥3 mm horizontally and ≤3 mm vertically according to computerized tomography served as inclusion criteria. Twenty-one implants were inserted after a healing period of 6 months. Five out of 21 implants were immediately restored. Bone measurements were taken before bone augmentation, during implant placement, and at second-stage surgery. Nineteen cancellous allogeneic bone-blocks were used. The mean follow-up time was 30 ± 16 months. Bone block and implant survival rates were 100% and 95.2%, respectively. Mean bone gain was statistically significant (P < .001): 5 ± 0.5 mm horizontally and 2 ± 0.5 mm vertically. All of the patients received a fixed implant-supported prosthesis. Soft tissue complications occurred in 4 patients (30%). Complications after cementation of the crowns were seen in 1 implant (4.8%). All implants remained clinically osseointegrated at the end of the follow-up examination. There was no crestal bone loss around the implants beyond the first implant thread. Cancellous bone block-allografts can be used successfully for implant-supported restorations in patients with congenitally missing teeth. Copyright © 2011 Mosby, Inc. All rights reserved.

Boc modifies the spectrum of holoprosencephaly in the absence of Gas1 function

PubMed Central

Seppala, Maisa; Xavier, Guilherme M.; Fan, Chen-Ming; Cobourne, Martyn T.

2014-01-01

ABSTRACT Holoprosencephaly is a heterogeneous developmental malformation of the central nervous system characterized by impaired forebrain cleavage, midline facial anomalies and wide phenotypic variation. Indeed, microforms represent the mildest manifestation, associated with facial anomalies but an intact central nervous system. In many cases, perturbations in sonic hedgehog signaling are responsible for holoprosencephaly. Here, we have elucidated the contribution of Gas1 and an additional hedgehog co-receptor, Boc during early development of the craniofacial midline, by generating single and compound mutant mice. Significantly, we find Boc has an essential role in the etiology of a unique form of lobar holoprosencephaly that only occurs in conjunction with combined loss of Gas1. Whilst Gas1−/− mice have microform holoprosencephaly characterized by a single median maxillary central incisor, cleft palate and pituitary anomalies, Boc−/− mice have a normal facial midline. However, Gas1−/−; Boc−/− mutants have lobar holoprosencephaly associated with clefting of the lip, palate and tongue, secondary to reduced sonic hedgehog transduction in the central nervous system and face. Moreover, maxillary incisor development is severely disrupted in these mice, arresting prior to cellular differentiation as a result of apoptosis in the odontogenic epithelium. Thus, Boc and Gas1 retain an essential function in these tooth germs, independent of their role in midline development of the central nervous system and face. Collectively, this phenotype demonstrates both redundancy and individual requirements for Gas1 and Boc during sonic hedgehog transduction in the craniofacial midline and suggests BOC as a potential digenic locus for lobar holoprosencephaly in human populations. PMID:25063195

Craniofacial changes in Icelandic children between 6 and 16 years of age - a longitudinal study.

PubMed

Thordarson, Arni; Johannsdottir, Berglind; Magnusson, Thordur Eydal

2006-04-01

The aim of the present study was to describe the craniofacial changes between 6 and 16 years of age in a sample of Icelandic children. Complete sets of lateral cephalometric radiographs were available from 95 males and 87 females. Twenty-two reference points were digitized and processed by standard methods, using the Dentofacial Planner computer software program. Thirty-three angular and linear variables were calculated, including: basal sagittal and vertical measurements, facial ratio, and dental, cranial base and mandibular measurements. For the angular measurements, gender differences were not statistically different for any of the measurements, in either age group, except for the variable s-n-na, which was larger in the 16-year-old boys (P < or = 0.001). Linear variables were consistently larger in the boys compared with the girls at both age levels. During the observation period mandibular prognathism increased but the basal sagittal jaw relationship, the jaw angle, the mandibular plane angle and cranial base flexure (n-s-ba) decreased in both genders (P < or = 0.001). Maxillary prognathism increased only in the boys from 6 to 16 years. Inclination of the lower incisors and all the cranial base dimensions increased in both genders during the observation period. When the Icelandic sample was compared with a similar Norwegian sample, small differences could be noted in the maxillary prognathism, mandibular plane angle and in the inclination of the maxilla. Larger differences were identified in the inclination of the lower incisors. These findings could be used as normative cephalometric standards for 6- and 16-year-old Icelandic children.

Three-dimensional quantification of pretorqued nickel-titanium wires in edgewise and prescription brackets.

PubMed

Mittal, Nitika; Xia, Zeyang; Chen, Jie; Stewart, Kelton T; Liu, Sean Shih-Yao

2013-05-01

To quantify the three-dimensional moments and forces produced by pretorqued nickel-titanium (NiTi) rectangular archwires fully engaged in 0.018- and 0.022-inch slots of central incisor and molar edgewise and prescription brackets. Ten identical acrylic dental models with retroclined maxillary incisors were fabricated for bonding with various bracket-wire combinations. Edgewise, Roth, and MBT brackets with 0.018- and 0.022-inch slots were bonded in a simulated 2 × 4 clinical scenario. The left central incisor and molar were sectioned and attached to load cells. Correspondingly sized straight and pretorqued NiTi archwires were ligated to the brackets using 0.010-inch ligatures. Each load cell simultaneously measured three force (Fx, Fy, Fz) and three moment (Mx, My, Mz) components. The faciolingual, mesiodistal, and inciso-occluso/apical axes of the teeth corresponded to the x, y, and z axes of the load cells, respectively. Each wire was removed and retested seven times. Three-way analysis of variance (ANOVA) examined the effects of wire type, wire size, and bracket type on the measured orthodontic load systems. Interactions among the three effects were examined and pair-wise comparisons between significant combinations were performed. The force and moment components on each tooth were quantified according to their local coordinate axes. The three-way ANOVA interaction terms were significant for all force and moment measurements (P < .05), except for Fy (P > .05). The pretorqued wire generates a significantly larger incisor facial crown torquing moment in the MBT prescription compared to Roth, edgewise, and the straight NiTi wire.

Interexaminer reliability in clinical measurement of L*C*h* values of anterior teeth using a spectrophotometer.

PubMed

Hassel, Alexander J; Grossmann, Anne-christiane; Schmitter, Marc; Balke, Zibandeh; Buzello, Anja M

2007-01-01

The objective of this study was to investigate interexaminer reliability in the clinical measurement of the L*C*h* (lightness/value, chroma, hue) values of anterior teeth using a spectrophotometer (Vita Easyshade). The basic color of the maxillary right central incisors and canines of 23 subjects was spectrophotometrically determined by 4 clinicians and an experienced user (development manager) of the spectrophotometer. Also, to analyze the effect of different training with the instrument on interexaminer reliability, 2 of the clinicians were instructed in the use of the spectrophotometer by the experienced examiner, whereas the others instructed themselves by studying the operating manual. Agreement between all examiners was acceptable to excellent (intraclass coefficient > 0.4). The mean value of the measured differences for the central incisors of all subjects for L* values was 5 (for C* = 3.8, h* = 2.7 degrees) and for canines, the mean L* was 4.5 (C* = 3, h* = 1.6 degrees). Results from comparison of the 2 different training methods were inconsistent. Agreement with the experienced examiner ranged from not acceptable (C* values for incisors of self-instructed examiners) to excellent. The distribution of the measurements of 1 subject could lead to deviations in color, probably with clinical impact. For canines, the measurements were at least equally reproducible (in some cases significantly more reproducible) compared to central incisors. Because of the small number of examiners and the inconsistent results, it was not possible to reach a definite conclusion about the effect of different training methods on interexaminer reliability.

Cloning of rat amelotin and localization of the protein to the basal lamina of maturation stage ameloblasts and junctional epithelium.

PubMed

Moffatt, Pierre; Smith, Charles E; St-Arnaud, René; Simmons, Darrin; Wright, J Timothy; Nanci, Antonio

2006-10-01

Formation of tooth enamel is a very complex process in which a specific set of proteins secreted by ameloblasts play a primordial role. As part of a screening procedure to identify novel proteins secreted by EO (enamel organ) cells of rat incisors, we isolated a partial cDNA fragment (EO-017) that is the homologue of the recently described mouse Amtn (amelotin) gene [Iwasaki, Bajenova, Somogyi-Ganss, Miller, Nguyen, Nourkeyhani, Gao, Wendel and Ganss (2005) J. Dent. Res. 84, 1127-1132]. Presented herein is the cloning of rat and pig full-length cDNAs with their deduced protein sequences. Detailed expression profiling by Northern-blot analysis and RT (reverse transcriptase)-PCR on rat and mouse tissues revealed highest expression in the mandible, more specifically in the maturation stage of the EO. Among all tissues tested, low expression was detected only in periodontal ligament, lung, thymus and gingiva. In silico analyses revealed that the Amtn gene is highly conserved in seven other mammals, but is absent from fish, birds and amphibians. The Amtn protein is enriched in proline, leucine, glutamine and threonine (52% of total) and contains a perfectly conserved protein kinase CK2 phosphorylation site. Transient transfection experiments in HEK-293 cells (human embryonic kidney cells) showed that secreted Amtn is post-translationally modified possibly through O-linked oligosaccharides on threonine residues. In concordance with its predominant expression site, immunofluorescence localization within the rat and mouse mandibles revealed Amtn localized to the basal lamina of maturation stage ameloblasts of incisors and unerupted molars. Intense Amtn protein expression was also detected in the internal basal lamina of junctional epithelium in molars. The peculiar and unique cellular localization of Amtn suggests a role in cell adhesion.

Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer

PubMed Central

Sodagar, A.; Ahmad Akhoundi, M. S.; Rafighii, A.; Arab, S.

2011-01-01

Objective Attempts to treat class II malocclusions without extraction in non-compliant patients have led to utilization of intraoral molar distalizing appliances. The purpose of this study was to investigate dental and skeletal effects of Bonded Molar Distalizer (BMD) which is a simple molar distalizing appliance. Materials and Methods Sixteen patients (12 girls, four boys) with bilateral half-cusp class II molar relationship, erupted permanent second molars and normal or vertical growth pattern were selected for bilateral distalization of maxillary molars via BMD. The screws were activated every other day, alternately. Lateral cephalograms and study models were obtained before treatment and after 11 weeks activation of the appliance. Results Significant amounts of molar distalization, molar distal tipping and anchorage loss were observed. The mean maxillary first molar distal movement was 1.22±0.936 mm with a distal tipping of 2.97±3.74 degrees in 11 weeks. The rate of distal movement was 0.48 mm per month. Reciprocal mesial movement of the first premolars was 2.26±1.12 mm with a mesial tipping of 4.25±3.12 degrees. Maxillary incisors moved 3.55±1.46 mm and tipped 9.87±5.03 degrees mesially. Lower anterior face height (LAFH) decreased 1.28±1.36 mm. Conclusion BMD is appropriate for distalizing maxillary molars, especially in patients with critical LAFH, although significant amounts of anchorage loss occur using this appliance. PMID:22457837

Apical root resorption due to orthodontic treatment detected by cone beam computed tomography.

PubMed

Castro, Iury O; Alencar, Ana H G; Valladares-Neto, José; Estrela, Carlos

2013-03-01

To determine the frequency of apical root resorption (ARR) due to orthodontic treatment using cone beam computed tomography (CBCT) in a sample of 1256 roots from 30 patients. All patients had Class I malocclusion with crowding. Of the 30 patients evaluated, 11 were boys and 19 were girls; their mean age was 13 years (11 to 16 years). Orthodontic treatment followed the nonextraction treatment. CBCT images were obtained before and after orthodontic treatment, and ARR was determined using Axial Guided Navigation of CBCT images. All patients had ARR. No statistically significant association was found between resorption frequency, gender, and age. ARR was detected using CBCT in 46% of all roots that underwent orthodontic treatment. CBCT was effective for detecting in vivo even minimal degrees of ARR due to orthodontic treatment and allowed three-dimensional evaluation of dental roots and visualization of palatine roots of maxillary molars. The highest frequencies and the most significant ARR occurred in incisors and distal roots of first maxillary and mandibular molars.

Conservative orthodontic-prosthodontic approach for excessive gingival display: A clinical report.

PubMed

del Castillo, Rafael; Hernández, Ana M; Ercoli, Carlo

2015-07-01

A differential diagnosis of excessive gingival display is critical in determining appropriate treatment options and sequence. Anterior tooth malposition for patients with deep vertical overlap has been suggested as one of the 3 main causes of excessive gingival display. Specifically, patients with Angle class II, division 2 malocclusions show an occlusal scheme that might be responsible for additional anterior tooth wear when compared with individuals without malocclusion. In the long term, this condition can cause dentoalveolar compensation and overeruption of maxillary incisors with concomitant coronal movement of the gingival margin with excessive gingival display. A combined orthodontic and restorative treatment was proposed as a conservative treatment to reposition maxillary anterior teeth and their gingival margins to a more ideal position and create the necessary interocclusal restorative space to restore worn teeth with ceramic restorations, enhance dental and facial esthetics, and reestablish anterior guidance. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Modified protrusion arch for anterior crossbite correction - a case report.

PubMed

Roy, Abhishek Singha; Singh, Gulshan Kr; Tandon, Pradeep; Chaudhary, Ramsukh

2013-01-01

Borderline and mild skeletal Class III relationships in adult patients are usually treated by orthodontic camouflage. Reasonably rood results have been achieved with nonsurgical teatment of anterior crossbite. Class III malocclusion may be associated with mandibular prognathism, maxillary retrognathism, or both. Class III maxillary retrognathism generally involves anterior crossbite, which must be opened if upper labial brackets are to be bonded. If multiple teeth are in crossbite, after opening the bite usual step is to ligate forward or advancement arch made of 0.018" or 0.020" stainless steel or NiTi wire main arch that must be kept separated 2 mm from the slot ofupper incisor braces. Two stops or omegas are made 1 mm mesial to the tubes of the molar bands that will impede main arch from slipping,and in this manner the arch will push the anterior teeth forward Here we have fabricated a modified multiple loop protrusion arch to correct an anterior crossbite with severe crowding that was not amenable to correct by advancement arches.

Professional and lay people perceptions of anterior maxillary esthetics

NASA Astrophysics Data System (ADS)

Roslan, Husniyati; Lillywhite, Graeme

2016-12-01

Achieving esthetic outcomes with implant-based restorations in the esthetic zone is a challenge due to the difficulty in replacing lost papillae. This study aimed to assess the influence of contact point position on the overall perception of esthetics as assessed by dental professionals and lay people. A cross-sectional study using self-administered questionnaire was distributed among 300 prosthodontists, general dentists and lay people in the United Kingdom. The questionnaire consisted of photographic images of a smile, intentionally altered using image manipulation software. Variations in contact length between maxillary central incisors were created to mimic the clinical situation when missing teeth were replaced with implant-supported crowns. These images were rated using VAS. One-way and two-way ANOVAs, and Tukey's test were used to analyze the data. The overall response rate by the three groups was 72%. Lay people and general dentists were more critical than prosthodontists in all VAS ratings (p < 0.000). Overall, all the groups perceived that the esthetic value reduced as the contact point increased in its length.

Correction of Angle Class II division 1 malocclusion with a mandibular protraction appliances and multiloop edgewise archwire technique

PubMed Central

Freitas, Heloiza; dos Santos, Pedro César F; Janson, Guilherme

2014-01-01

A Brazilian girl aged 14 years and 9 months presented with a chief complaint of protrusive teeth. She had a convex facial profile, extreme overjet, deep bite, lack of passive lip seal, acute nasolabial angle, and retrognathic mandible. Intraorally, she showed maxillary diastemas, slight mandibular incisor crowding, a small maxillary arch, 13-mm overjet, and 4-mm overbite. After the diagnosis of severe Angle Class II division 1 malocclusion, a mandibular protraction appliance was placed to correct the Class II relationships and multiloop edgewise archwires were used for finishing. Follow-up examinations revealed an improved facial profile, normal overjet and overbite, and good intercuspation. The patient was satisfied with her occlusion, smile, and facial appearance. The excellent results suggest that orthodontic camouflage by using a mandibular protraction appliance in combination with the multiloop edgewise archwire technique is an effective option for correcting Class II malocclusions in patients who refuse orthognathic surgery. PMID:25309867

Perception of the esthetic impact of gingival smile on laypersons, dental professionals, and dental students.

PubMed

Pithon, Matheus Melo; Santos, Adrielle Mangabeira; Viana de Andrade, Ana Carolina Dias; Santos, Eloá Mangabeira; Couto, Felipe Santos; da Silva Coqueiro, Raildo

2013-04-01

The aim of this study was to evaluate perceptions regarding esthetic appearance of the smile in cases of orthognathic surgery for correction of maxillary gingival display. Alterations were made to an extraoral front-view photograph of a gingival smile in normal occlusion by repositioning the maxilla to simulate bone tissue removal and gingival exposure. Images were printed on photographic paper attached to questionnaires distributed among laypersons, professionals, and dental students to evaluate degree of esthetics (n = 150). To evaluate degree of esthetics, an attractiveness-scale was used, with 0 representing hardly attractive, 5 attractive, and 10 very attractive. All of the evaluated groups demonstrated that large gingival extension does not always affect esthetic appearance of the smile. Insufficiently visualized maxillary incisors were considered hardly attractive and received statistically lower scores (P < .05). According to esthetic parameters, gingiva play important roles in composition of the smile, but only when they are exposed to a small extent. Copyright © 2013 Elsevier Inc. All rights reserved.

Long-term observation of endodontic surgical intervention to treat root perforation and apical periodontitis: a case report of an amalgam-restored tooth.

PubMed

Tsurumachi, Tamotsu; Hayashi, Makoto

2003-10-01

A case of crestal root perforation and periapical lesion in a maxillary left lateral incisor is reported. Teeth with root perforation present technical difficulties in their clinical management because of their complex defects. In the present case, surgical endodontic treatment was chosen. The apical and lateral pathology was curetted, the tooth root was resected, and a retrograde root restoration of amalgam was placed in a root-end cavity and perforation site. A 10-year follow-up clinical and radiographic examination showed an asymptomatic tooth with osseous healing proceeding.

Panoramic radiographic survey of hypodontia in Australian Defence Force recruits.

PubMed

Lynham, A

1990-02-01

Comprehensive dental examinations and panoramic radiographs were used to determine the prevalence of hypodontia in 662 Australian Defence Force recruits. Of the sampled population, 6.3 per cent exhibited some degree of hypodontia (third molar agenesis excluded). Previous studies produced similar results. Third molar agenesis occurred in 22.7 per cent of the sample which again is in agreement with other studies. There was no statistical difference between the sexes in third molar agenesis; however, there was a significant difference with upper second premolars. Females exhibited an extremely low incidence of absence of maxillary lateral incisors.

Influence of remaining coronal tooth structure on fracture resistance and failure mode of restored endodontically treated maxillary incisors.

PubMed

Santos Pantaleón, Domingo; Morrow, Brian R; Cagna, David R; Pameijer, Cornelis H; Garcia-Godoy, Franklin

2018-03-01

Limited information is available on the effect of an incomplete ferrule because of the varying residual axial wall heights and the volume of residual tooth structure on the fracture resistance of endodontically treated and restored maxillary incisors. The purpose of this in vitro investigation was to examine the effect of varying residual axial wall heights, residual coronal tooth structure, and the absence of 1 proximal axial wall on the fracture resistance and failure mode of endodontically treated teeth restored with metal posts. Sixty intact human maxillary central incisors were divided into 6 groups (n=10): no ferrule (NF), 2-mm complete ferrule (CF2), 2-mm (IF2), 3-mm (IF3), and 4-mm (IF4) incomplete ferrules missing a single interproximal wall, and a control group that had a 6-mm incomplete ferrule (IF6). Cast metal post-and-cores were placed in all experimental specimens except for controls. Control specimens received 1 interproximal cavity preparation extending to the root canal access and a composite resin restoration. Complete metal crowns were then cemented on all specimens. Completed specimens were subjected to thermocycling (6000 cycles, 5°C/55°C) followed by the immediate testing of fracture resistance. Failed specimens were sectioned buccolingually and evaluated to identify the failure mode. The data were analyzed with an analysis of variance (ANOVA) and the Student-Newman-Keuls multiple comparison test (α=.05). An incomplete ferrule (IF2) with 1 interproximal wall missing had significantly reduced fracture resistance (697 N) compared with a complete ferrule (932 N). An increase of 3 to 4 mm of remaining wall height improved fracture resistance, from 844 N (IF3) to 853 N (IF4). Partial decementation was noticed in 8 NF and 5 IF2 specimens. IF3 and IF4 had no decementations. Radicular fractures and cracks (catastrophic failure) were observed in all IF2, IF3, and IF4, 9 CF2, and 6 NF specimens. In 7 specimens without posts (IF6, control), composite resin foundation and/or coronal dentin fracture were observed and the failure was considered repairable. The results of this in vitro study indicated that specimens with a 2-mm ferrule of uniform height were more resistant to fracture than specimens with a 2-mm ferrule and 1 missing interproximal wall. An increased wall height of 3 or 4 mm was associated with a significant increase in fracture resistance and can compensate for the missing interproximal wall. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Pressure Bearing Device Affects Extraction Socket Remodeling of Maxillary Anterior Tooth. A Prospective Clinical Trial.

PubMed

Jiang, Xi; Zhang, Yu; Chen, Bo; Lin, Ye

2017-04-01

Extraction socket remodeling and ridge preservation strategies have been extensively explored. To evaluate the efficacy of applying a micro-titanium stent as a pressure bearing device on extraction socket remodeling of maxillary anterior tooth. Twenty-four patients with a extraction socket of maxillary incisor were treated with spontaneous healing (control group) or by applying a micro-titanium stent as a facial pressure bearing device over the facial bone wall (test group). Two virtual models obtained from cone beam computed tomography data before extraction and 4 months after healing were 3-dimenionally superimposed. Facial bone wall resorption, extraction socket remodeling features and ridge width preservation rate were determined and compared between the groups. Thin facial bone wall resulted in marked resorption in both groups. The greatest palatal shifting distance of facial bone located at the coronal level in the control group, but middle level in the test group. Compared with the original extraction socket, 87.61 ± 5.88% ridge width was preserved in the test group and 55.09 ± 14.46% in the control group. Due to the facial pressure bearing property, the rigid micro-titanium stent might preserve the ridge width and alter the resorption features of extraction socket. © 2016 Wiley Periodicals, Inc.

Sequencing of bimaxillary surgery in the correction of vertical maxillary excess: retrospective study.

PubMed

Salmen, F S; de Oliveira, T F M; Gabrielli, M A C; Pereira Filho, V A; Real Gabrielli, M F

2018-06-01

The aim of this study was to evaluate the precision of bimaxillary surgery performed to correct vertical maxillary excess, when the procedure is sequenced with mandibular surgery first or maxillary surgery first. Thirty-two patients, divided into two groups, were included in this retrospective study. Group 1 comprised patients who received bimaxillary surgery following the classical sequence with repositioning of the maxilla first. Patients in group 2 received bimaxillary surgery, but the mandible was operated on first. The precision of the maxillomandibular repositioning was determined by comparison of the digital prediction and postoperative tracings superimposed on the cranial base. The data were tabulated and analyzed statistically. In this sample, both surgical sequences provided adequate clinical accuracy. The classical sequence, repositioning the maxilla first, resulted in greater accuracy for A-point and the upper incisor edge vertical position. Repositioning the mandible first allowed greater precision in the vertical position of pogonion. In conclusion, although both surgical sequences may be used, repositioning the mandible first will result in greater imprecision in relation to the predictive tracing than repositioning the maxilla first. The classical sequence resulted in greater accuracy in the vertical position of the maxilla, which is key for aesthetics. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.