Effect of flash-heat treatment on antimicrobial activity of breastmilk.

PubMed

Chantry, Caroline J; Wiedeman, Jean; Buehring, Gertrude; Peerson, Janet M; Hayfron, Kweku; K'Aluoch, Okumu; Lonnerdal, Bo; Israel-Ballard, Kiersten; Coutsoudis, Anna; Abrams, Barbara

2011-06-01

The World Health Organization recommends human immunodeficiency virus (HIV)-positive mothers in resource-poor regions heat-treat expressed breastmilk during periods of increased maternal-to-child transmission risk. Flash-heat, a "low tech" pasteurization method, inactivates HIV, but effects on milk protein bioactivity are unknown. The objectives were to measure flash-heat's effect on antimicrobial properties of lactoferrin, lysozyme, and whole milk and on the digestive resistance of lactoferrin and lysozyme. Flash-heated and unheated breastmilk aliquots from HIV-positive mothers in South Africa were "spiked" with Staphylococcus aureus and Escherichia coli and then cultured for 0, 3, and 6 hours. Lysozyme and lactoferrin activities were determined by lysis of Micrococcus luteus cells and inhibition of enteropathogenic E. coli, respectively, measured spectrophotometrically. Percentages of proteins surviving in vitro digestion, lactoferrin and lysozyme activity, and bacteriostatic activity of whole milk in heated versus unheated samples were compared. There was no difference in rate of growth of E. coli or S. aureus in flash-heated versus unheated whole milk (p = 0.61 and p = 0.96, respectively). Mean (95% confidence interval) antibacterial activity of lactoferrin was diminished 11.1% (7.8%, 14.3%) and that of lysozyme by up to 56.6% (47.1%, 64.5%) by flash-heat. Digestion of lysozyme was unaffected (p = 0.12), but 25.4% less lactoferrin survived digestion (p < 0.0001). In summary, flash-heat resulted in minimally decreased lactoferrin and moderately decreased lysozyme bioactivity, but bacteriostatic activity of whole milk against representative bacteria was unaffected. This suggests flash-heated breastmilk likely has a similar profile of resistance to bacterial contamination as that of unheated milk. Clinical significance of the decreased bioactivity should be tested in clinical trials.

Effect of Flash-Heat Treatment on Antimicrobial Activity of Breastmilk

PubMed Central

Wiedeman, Jean; Buehring, Gertrude; Peerson, Janet M.; Hayfron, Kweku; K'Aluoch, Okumu; Lonnerdal, Bo; Israel-Ballard, Kiersten; Coutsoudis, Anna; Abrams, Barbara

2011-01-01

Abstract Background and Objectives The World Health Organization recommends human immunodeficiency virus (HIV)-positive mothers in resource-poor regions heat-treat expressed breastmilk during periods of increased maternal-to-child transmission risk. Flash-heat, a “low tech” pasteurization method, inactivates HIV, but effects on milk protein bioactivity are unknown. The objectives were to measure flash-heat's effect on antimicrobial properties of lactoferrin, lysozyme, and whole milk and on the digestive resistance of lactoferrin and lysozyme. Methods Flash-heated and unheated breastmilk aliquots from HIV-positive mothers in South Africa were “spiked” with Staphylococcus aureus and Escherichia coli and then cultured for 0, 3, and 6 hours. Lysozyme and lactoferrin activities were determined by lysis of Micrococcus luteus cells and inhibition of enteropathogenic E. coli, respectively, measured spectrophotometrically. Percentages of proteins surviving in vitro digestion, lactoferrin and lysozyme activity, and bacteriostatic activity of whole milk in heated versus unheated samples were compared. Results There was no difference in rate of growth of E. coli or S. aureus in flash-heated versus unheated whole milk (p = 0.61 and p = 0.96, respectively). Mean (95% confidence interval) antibacterial activity of lactoferrin was diminished 11.1% (7.8%, 14.3%) and that of lysozyme by up to 56.6% (47.1%, 64.5%) by flash-heat. Digestion of lysozyme was unaffected (p = 0.12), but 25.4% less lactoferrin survived digestion (p < 0.0001). Conclusions In summary, flash-heat resulted in minimally decreased lactoferrin and moderately decreased lysozyme bioactivity, but bacteriostatic activity of whole milk against representative bacteria was unaffected. This suggests flash-heated breastmilk likely has a similar profile of resistance to bacterial contamination as that of unheated milk. Clinical significance of the decreased bioactivity should be tested in clinical trials. PMID:21091243

Impact of humidification and nebulization during expiratory limb protection: an experimental bench study.

PubMed

Tonnelier, Alexandre; Lellouche, François; Bouchard, Pierre Alexandre; L'Her, Erwan

2013-08-01

Different filtering devices are used during mechanical ventilation to avoid dysfunction of flow and pressure transducers or for airborne microorganisms containment. Water condensates, resulting from the use of humidifiers, but also residual nebulization particles may have a major influence on expiratory limb resistance. To evaluate the influence of nebulization and active humidification on the resistance of expiratory filters. A respiratory system analog was constructed using a test lung, an ICU ventilator, heated humidifiers, and a piezoelectric nebulizer. Humidifiers were connected to different types of circuits (unheated, mono-heated, new-generation and old-generation bi-heated). Five filter types were evaluated: electrostatic, heat-and-moisture exchanger, standard, specific, and internal heated high-efficiency particulate air [HEPA] filter. Baseline characteristics were obtained from each dry filter. Differential pressure measurements were carried out after 24 hours of continuous in vitro use for each condition, and after 24 hours of use with an old-generation bi-heated circuit without nebulization. While using unheated circuits, measurements had to be interrupted before 24 hours for all the filtering devices except the internal heated HEPA filter. The heat-and-moisture exchangers occluded before 24 hours with the unheated and mono-heated circuits. The circuit type, nebulization practice, and duration of use did not influence the internal heated HEPA filter resistance. Expiratory limb filtration is likely to induce several major adverse events. Expiratory filter resistance increase is due mainly to the humidification circuit type, rather than to nebulization. If filtration is mandatory while using an unheated circuit, a dedicated filter should be used for ≤ 24 hours, or a heated HEPA for a longer duration.

The influence of double-diffusive processes on the melting of ice in the Arctic Ocean: laboratory analogue experiments and their interpretation

NASA Astrophysics Data System (ADS)

Turner, J. S.; Veronis, G.

2004-03-01

This study has been motivated by two oceanographic observations: an increased rate of melting of sea ice in the Arctic Ocean, and the advance of an anomalously warm tongue of Atlantic water across the Arctic below the halocline over the last few decades. A series of laboratory experiments has been carried out in order to explore the physical principles underlying these phenomena, and the possibility that the extra heating at depth is responsible for the enhanced melting rate. A tank was filled with salt solution having various constant vertical density gradients. A block of ice one third of the length of the tank was floated on the surface at one end, and the rest of the surface and the walls of the tank were insulated. When no extra heat was supplied the melting rate (loss of weight of the ice in 1 h) systematically decreased as the stratification was changed from homogeneous fluid to increasingly large density gradients, while keeping the salinity of the solution in contact with the ice constant. An analogue of the intruding Atlantic water was produced by heating the lower portion of the vertical end wall at the end of the tank opposite to the ice end, keeping its temperature constant, and using the same range of salinity gradients as in the unheated experiments. Again the melting rate decreased as the density gradient was increased, but for low gradients it was larger than that in the unheated experiments. Above a certain intermediate gradient there was no significant difference in melting rate between the unheated and heated runs. The melting data were supplemented by photographs and vertical temperature and salinity profiles. The upward transfer of heat from the body of the fluid to melt the ice was clearly double-diffusive: overturning layers, separated by 'diffusive' interfaces, were visible on shadowgraphs, and the thickness of the layers decreased as the density gradient increased. The mean thickness of the layers through the depth of the tank also systematically decreased as the density gradient increased. With weak gradients an extra heat flux to the ice came from the intruding heated layer, but at large gradients this tongue of warm water at depth did not add to the flux near the surface. Though they were obtained in a simple, arbitrary and fixed geometry, we believe that the results of these experiments can be used as the basis for a better physical understanding of the melting rates of ice in the Arctic under various conditions.

Transfer of preterm infants from incubator to open cot at lower versus higher body weight.

PubMed

New, Karen; Flenady, Vicki; Davies, Mark W

2011-09-07

A key criterion for discharging preterm infants home from nurseries is their ability to maintain temperature once transferred from incubators to open cots. The timing of transfer is important given the preterm infant's immature thermoregulatory mechanisms. To determine the effects of body weight in transferring preterm infants from incubators to unheated open cots. Electronic databases, the Cochrane Central Register of Controlled Trials, clinical trials registers and the abstracts of the Society for Pediatric Research were searched. Randomised and quasi-randomised controlled trials comparing transfer of preterm infants from incubators to unheated open cots at lower and higher body weights. Data collection and analysis was performed in accordance with the methods of the Cochrane Neonatal Review Group. Four eligible studies were identified. Two of the identified trials were assessed as having good methodological quality. Two studies reported daily weight gain (calculated as growth velocity); the lower body weight group had a significantly greater daily weight gain [pooled mean difference (MD) 2.66 (95% confidence interval (CI)1.37 to 3.95). One study reported a larger proportion of infants transferred at the higher body weight had an episode of low temperature in the first 72 hours; while no difference between the two groups was found in the proportion of infants experiencing cold stress post-transfer to discharge. Two studies report no difference between the two groups in requiring an overhead heater for temperature maintenance [pooled RR 1.43 (95% CI 0.35 to 1.18). No statistically significant difference was shown for proportion of infants returning to an incubator [three studies (N = 336) [pooled RR 1.78 (95% CI 0.77 to 4.08].Two studies report there was no statistically significant difference in time spent in an open cot post transfer to discharge; while one study found infants transferred at lower weights had a significantly reduced length of stay [MD -9.00 (95% CI -13.29 to -4.71), a second study found no differences between the two groups [MD 0.30 (95% CI -5.11 to 5.71). In these two studies not breastfeeding at discharge was not significantly different between the lower and higher body weight groups [pooled RR 1.02 (95% CI 0.69 to 1.51). Medically stable preterm infants can be transferred to unheated open cots at a lower body weight of 1600 grams without adverse effects on temperature stability or weight gain. Earlier transfer does not necessarily result in earlier discharge.

Mutagenicity of edible palm oil on the Ghanaian market before and after repeated heating.

PubMed

Asare, George A; Okyere, Genevieve O; Asante, Matilda; Brown, Charles A; Santa, Sheila; Asiedu, Bernice

2013-12-01

Red palm oil produced in Ghana largely by village folks has never been tested for its mutagenic potential. The study aimed at determining the mutagenicity of high-energy heated red palm oil (RRPO) and refined, bleached imported palm oil (PO) on the Ghanaian market. Samples of RRPO and PO were 1× and 5× heated for 10 min at 180 °C with a cooling period of 5 h in-between. Unheated, together with heated samples, were tested for mutagenicity using Salmonella typhimurium TA 98 and TA 100 tester stains. Unheated PO was negative for the Ames mutagenicity test with TA 98 strain. However, 1× and 5× heated PO were mutagenic (P = 0.05, each). Testing PO, using TA 100 strain was negative. RRPO was mutagenic with TA 98 strain for heated oils (P = 0.05, each). Assays with TA 100 strain showed highly significant mutations (P = 0.001, each) that increased with increasing heating frequency. PO 1× and 5× heated samples caused significant frameshift mutation in the S. typhimurium TA 98 strain. RRPO caused highly significant point and frameshift mutations in heated samples. Furthermore, unheated RRPO mutagenic potential has serious health implications. © 2013 Institute of Food Technologists®

Computational Fluid Dynamic Modeling of Rocket Based Combined Cycle Engine Flowfields

NASA Technical Reports Server (NTRS)

Daines, Russell L.; Merkle, Charles L.

1994-01-01

Computational Fluid Dynamic techniques are used to study the flowfield of a fixed geometry Rocket Based Combined Cycle engine operating in rocket ejector mode. Heat addition resulting from the combustion of injected fuel causes the subsonic engine flow to choke and go supersonic in the slightly divergent combustor-mixer section. Reacting flow computations are undertaken to predict the characteristics of solutions where the heat addition is determined by the flowfield. Here, adaptive gridding is used to improve resolution in the shear layers. Results show that the sonic speed is reached in the unheated portions of the flow first, while the heated portions become supersonic later. Comparison with results from another code show reasonable agreement. The coupled solutions show that the character of the combustion-based thermal choking phenomenon can be controlled reasonably well such that there is opportunity to optimize the length and expansion ratio of the combustor-mixer.

Validating a Monotonically-Integrated Large Eddy Simulation Code for Subsonic Jet Acoustics

NASA Technical Reports Server (NTRS)

Ingraham, Daniel; Bridges, James

2017-01-01

The results of subsonic jet validation cases for the Naval Research Lab's Jet Engine Noise REduction (JENRE) code are reported. Two set points from the Tanna matrix, set point 3 (Ma = 0.5, unheated) and set point 7 (Ma = 0.9, unheated) are attempted on three different meshes. After a brief discussion of the JENRE code and the meshes constructed for this work, the turbulent statistics for the axial velocity are presented and compared to experimental data, with favorable results. Preliminary simulations for set point 23 (Ma = 0.5, Tj=T1 = 1.764) on one of the meshes are also described. Finally, the proposed configuration for the farfield noise prediction with JENRE's Ffowcs-Williams Hawking solver are detailed.

Toxicity of abate® 4E (temephos) in mallard ducklings and the influence of cold

USGS Publications Warehouse

Fleming, W.J.; Heinz, G.H.; Franson, J.C.; Rattner, B.A.

1985-01-01

Diets mixed to contain 0, 0.1, 1.0, 10 and 100 ppm temephos (determined chemically to contain less than 0.5, less than 0.5, 0.89, 6.0 and 59 ppm temephos, respectively) in an Abate® 4E formulation, were fed to mallard (Anas platyrhynchos) ducklings for 7 d. During this period, half of the ducklings in each dietary treatment group were housed in a heated brooder (39 to 41 °C) and half were housed in an unheated brooder (10 to 18°C). Mortality in all dietary groups in the unheated brooder was higher than in the heated brooder. High temephos-related mortality occurred in the 100 ppm group in the unheated brooder but not in any other diet-temperature groups. Ingestion of the 100 ppm temephos diet inhibited plasma Cholinesterase (ChE) activity and elevated plasma corticosterone concentration and creatine phosphokinase activity, but other selected plasma chemistries were not affected in a dose-related manner. Brain ChE activity was depressed only in the 100 ppm dietary groups; maximum inhibition of brain ChE activity was 48%. These findings suggest that diets containing up to 10 ppm temephos do not directly affect duckling survival during the first week of life and that the toxicity of 100 ppm temephos is markedly enhanced by cold.

Role of kappa-casein in the association of denatured whey proteins with casein micelles in heated reconstituted skim milk.

PubMed

Anema, Skelte G

2007-05-02

Reconstituted skim milk at pH from 6.5 to 7.1 was unheated, preheated (68 degrees C/20 min), or heated at 90 degrees C for 20-30 min. On preheating, the size of the casein micelles decreased by about 5-20 nm, with a greater effect at higher pH. The casein micelle size of the heated milk at pH 6.5 increased by about 30 nm when compared to that of the unheated or preheated milk. As the pH was increased before heating, the particle size gradually decreased so that, at pH 7.1, the size was markedly smaller than that for the unheated milk and slightly smaller than that for the preheated milk. High levels (about 85%) of denatured whey protein associated with the casein micelles at pH 6.5, and this level decreased as the pH increased so that, at pH 7.1, low levels (about 15%) were associated with the micelles. Low levels of alphaS-casein and beta-casein were found in the serum regardless of the heat treatment or the pH of the milk. At pH 6.5, low levels (about 10%) of kappa-casein were also found in the milk serum. In the unheated milk, the level of serum kappa-casein increased slightly with increasing pH; in the heated samples, the level of serum kappa-casein increased markedly and linearly with increasing pH so that, at pH 7.1, about 70% of the kappa-casein was in the serum phase. The results of this study indicate that the pH dependence of the levels of serum phase kappa-casein may be responsible for the change in distribution of the whey proteins between the colloidal and serum phases. This is the first report to demonstrate significant levels of dissociation of kappa-casein from the micelles at pH between 6.5 and 6.7, although this dissociation phenomenon is well known on heating milk at high temperatures at pH above 6.7.

Modifications of wheat flour proteins during in vitro digestion of bread dough, crumb, and crust: an electrophoretic and immunological study.

PubMed

Pasini, G; Simonato, B; Giannattasio, M; Peruffo, A D; Curioni, A

2001-05-01

The proteins of wheat flour have several biological activities that can affect human health and physiology when wheat-based foods are consumed. The modifications of bread crumb and crust proteins during an in vitro peptic/pancreatic digestion process were studied by electrophoresis and immunoblotting with polyclonal antibodies specific for single proteins or groups of homologous proteins of the wheat flour, and the results were compared to those obtained for an unheated dough sample. The results show that baking affects the extent of proteolysis and the immunological and physicochemical features of the digestion products in relation to the level of the heat treatment. Therefore, the results concerning the digestion of the unheated wheat flour or dough are not representative of what happens when baked products enter the human digestive tract.

Preparation of graphene-ZrO2 nanocomposites by heat treatment and photocatalytic degradation of organic dyes.

PubMed

Cho, Bum Hwi; Ko, Weon Bae

2013-11-01

ZrO2 nanoparticles were synthesized by combining a solution containing zinconyl chloride in distilled water with a NH4OH solution under microwave irradiation. Graphene and ZrO2 nanocomposites were synthesized in an electric furnace at 700 degrees C for 2 hours. The heated graphene-ZrO2 nanocomposites were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. In addition, UV-vis spectrophotometry was used to evaluate the heated graphene-ZrO2 nanocomposites as a catalyst in the photocatalytic degradation of organic dyes. The photocatalytic effect of the heated graphene-ZrO2 nanocomposites was compared with that of unheated graphene nanoparticles, heated graphene nanoparticles, and unheated graphene-ZrO2 nanocomposites in organic dyes (methylene blue, methyl orange, and rhodamine B) under ultraviolet light at 254 nm.

Near band edge emission characteristics of sputtered nano-crystalline ZnO films

NASA Astrophysics Data System (ADS)

Kunj, Saurabh; Sreenivas, K.

2016-05-01

Sputtered zinc oxide (ZnO) thin films deposited on unheated glass substrate under different sputtering gas mixtures (Ar+O2) have been investigated using X-ray diffraction and photo luminescence spectroscopy. Earlier reported studies on ZnO films prepared by different techniques exhibit either a sharp/broad near band edge (NBE) emission peak depending on the crystalline quality of the film. In the present study zinc oxide films, grown on unheated substrates, are seen to possess a preferred (002) orientation with a microstructure consisting of clustered nano-sized crystallites. The splitting in the near band edge emission (NBE) into three characteristic peaks is attributed to quantum confinement effect, and is observed specifically under an excitation of 270 nm. Deep level emission (DLE) in the range 400 to 700 nm is not observed indicating absence of deep level radiative defects.

Hot wire anemometer measurements in the unheated air flow tests of the SRB nozzle-to-case joint

NASA Technical Reports Server (NTRS)

Ramachandran, N.

1988-01-01

Hot-Wire Anemometer measurements made in the Solid Rocket Booster (SRB) nozzle-to-case joint are discussed. The study was undertaken to glean additional information on the circumferential flow induced in the SRB nozzle joint and the effect of this flow on the insulation bonding flaws. The tests were conducted on a full-scale, 2-D representation of a 65-in long segment of the SRB nozzle joint, with unheated air as the working fluid. Both the flight Mach number and Reynolds number were matched simultaneously and different pressure gradients imposed along the joint face were investigated. Hot-wire anemometers were used to obtain velocity data for different joint gaps and debond configurations. The procedure adopted for hot-wire calibration and use is outlined and the results from the tests summarized.

Shear flow control of cold and heated rectangular jets by mechanical tabs. Volume 2: Tabulated data

NASA Technical Reports Server (NTRS)

Brown, W. H.; Ahuja, K. K.

1989-01-01

The effects of mechanical protrusions on the jet mixing characteristics of rectangular nozzles for heated and unheated subsonic and supersonic jet plumes were studied. The characteristics of a rectangular nozzle of aspect ratio 4 without the mechanical protrusions were first investigated. Intrusive probes were used to make the flow measurements. Possible errors introduced by intrusive probes in making shear flow measurements were also examined. Several scaled sizes of mechanical tabs were then tested, configured around the perimeter of the rectangular jet. Both the number and the location of the tabs were varied. From this, the best configuration was selected. This volume contains tabulated data for each of the data runs cited in Volume 1. Baseline characteristics, mixing modifications (subsonic and supersonic, heated and unheated) and miscellaneous charts are included.

Characterization of Three-Stream Jet Flow Fields

NASA Technical Reports Server (NTRS)

Henderson, Brenda S.; Wernet, Mark P.

2016-01-01

Flow-field measurements were conducted on single-, dual- and three-stream jets using two-component and stereo Particle Image Velocimetry (PIV). The flow-field measurements complimented previous acoustic measurements. The exhaust system consisted of externally-plugged, externally-mixed, convergent nozzles. The study used bypass-to-core area ratios equal to 1.0 and 2.5 and tertiary-to-core area ratios equal to 0.6 and 1.0. Axisymmetric and offset tertiary nozzles were investigated for heated and unheated high-subsonic conditions. Centerline velocity decay rates for the single-, dual- and three-stream axisymmetric jets compared well when axial distance was normalized by an equivalent diameter based on the nozzle system total exit area. The tertiary stream had a greater impact on the mean axial velocity for the small bypass-to-core area ratio nozzles than for large bypass-to-core area ratio nozzles. Normalized turbulence intensities were similar for the single-, dual-, and three-stream unheated jets due to the small difference (10 percent) in the core and bypass velocities for the dual-stream jets and the low tertiary velocity (50 percent of the core stream) for the three-stream jets. For heated jet conditions where the bypass velocity was 65 percent of the core velocity, additional regions of high turbulence intensity occurred near the plug tip which were not present for the unheated jets. Offsetting the tertiary stream moved the peak turbulence intensity levels upstream relative to those for all axisymmetric jets investigated.

Characterization of Three-Stream Jet Flow Fields

NASA Technical Reports Server (NTRS)

Henderson, Brenda S.; Wernet, Mark P.

2016-01-01

Flow-field measurements were conducted on single-, dual- and three-stream jets using two-component and stereo Particle Image Velocimetry (PIV). The flow-field measurements complimented previous acoustic measurements. The exhaust system consisted of externally-plugged, externally-mixed, convergent nozzles. The study used bypass-to-core area ratios equal to 1.0 and 2.5 and tertiary-to-core area ratios equal to 0.6 and 1.0. Axisymmetric and offset tertiary nozzles were investigated for heated and unheated high-subsonic conditions. Centerline velocity decay rates for the single-, dual- and three-stream axisymmetric jets compared well when axial distance was normalized by an equivalent diameter based on the nozzle system total exit area. The tertiary stream had a greater impact on the mean axial velocity for the small bypass-to-core area ratio nozzles than for large bypass-to-core area ratio nozzles. Normalized turbulence intensities were similar for the single-, dual-, and three-stream unheated jets due to the small difference (10%) in the core and bypass velocities for the dual-stream jets and the low tertiary velocity (50% of the core stream) for the three-stream jets. For heated jet conditions where the bypass velocity was 65% of the core velocity, additional regions of high turbulence intensity occurred near the plug tip which were not present for the unheated jets. Offsetting the tertiary stream moved the peak turbulence intensity levels upstream relative to those for all axisymmetric jets investigated.

Thermal ecology of Naegleria fowleri from a power plant cooling reservoir

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huizinga, H.W.; McLaughlin, G.L.

1990-07-01

The pathogenic, free-living amoeba Naegleria fowleri is the causative agent of human primary amebic meningoencephalitis. N. fowleri has been isolated from thermally elevated aquatic environments worldwide, but temperature factors associated with occurrence of the amoeba remain undefined. In this study, a newly created cooling reservoir (Clinton Lake, Illinois) was surveyed for Naegleria spp. before and after thermal additions from a nuclear power plant. Water and sediment samples were collected from heated and unheated arms of the reservoir and analyzed for the presence of thermophilic Naegleria spp. and pathogenic N. fowleri. Amoebae were identified by morphology, in vitro cultivation, temperature tolerance,more » mouse pathogenicity assay, and DNA restriction fragment length analysis. N. fowleri was isolated from the thermally elevated arm but not from the ambient-temperature arm of the reservoir. The probability of isolating thermophilic Naegleria and pathogenic N. fowleri increased significantly with temperature. Repetitive DNA restriction fragment profiles of the N. fowleri Clinton Lake isolates and a known N. fowleri strain of human origin were homogeneous.« less

Atomic Structure of a Cesium Aluminosilicate Geopolymer: A Pair Distribution Function Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bell, J.; Sarin, P; Provis, J

2008-01-01

The atomic pair distribution function (PDF) method was used to study the structure of cesium aluminosilicate geopolymer. The geopolymer was prepared by reacting metakaolin with cesium silicate solution followed by curing at 50C for 24 h in a sealed container. Heating of Cs-geopolymer above 1000C resulted in formation of crystalline pollucite (CsAlSi{sub 2}O{sub 6}). PDF refinement of the pollucite phase formed displayed an excellent fit over the 10-30 {angstrom} range when compared with a cubic pollucite model. A poorer fit was attained from 1-10 {angstrom} due to an additional amorphous phase present in the heated geopolymer. On the basis ofmore » PDF analysis, unheated Cs-geopolymer displayed structural ordering similar to pollucite up to a length scale of 9 {angstrom}, despite some differences. Our results suggest that hydrated Cs{sup +} ions were an integral part of the Cs-geopolymer structure and that most of the water present was not associated with Al-OH or Si-OH bonds.« less

Impact of thermal processing on sulforaphane yield from broccoli ( Brassica oleracea L. ssp. italica).

PubMed

Wang, Grace C; Farnham, Mark; Jeffery, Elizabeth H

2012-07-11

In broccoli, sulforaphane forms when the glucosinolate glucoraphanin is hydrolyzed by the endogenous plant thiohydrolase myrosinase. A myrosinase cofactor directs hydrolysis away from the formation of bioactive sulforaphane and toward an inactive product, sulforaphane nitrile. The cofactor is more heat sensitive than myrosinase, presenting an opportunity to preferentially direct hydrolysis toward sulforaphane formation through regulation of thermal processing. Four broccoli cultivars were microwave heated, boiled, or steamed for various lengths of time. Production of nitrile during hydrolysis of unheated broccoli varied among cultivars from 91 to 52% of hydrolysis products (Pinnacle > Marathon > Patriot > Brigadier). Boiling and microwave heating caused an initial loss of nitrile, with a concomitant increase in sulforaphane, followed by loss of sulforaphane, all within 1 min. In contrast, steaming enhanced sulforaphane yield between 1.0 and 3.0 min in all but Brigadier. These data are proof of concept that steaming for 1.0-3.0 min provides less nitrile and more sulforaphane yield from a broccoli meal.

Retrospective dosimetry: dose evaluation using unheated and heated quartz from a radioactive waste storage building.

PubMed

Jain, M; Bøtter-Jensen, L; Murray, A S; Jungner, H

2002-01-01

In the assessment of dose received from a nuclear accident, considerable attention has been paid to retrospective dosimetry using heated materials such as household ceramics and bricks. However, unheated materials such as mortar and concrete are more commonly found in industrial sites and particularly in nuclear installations. These materials contain natural dosemeters such as quartz, which usually is less sensitive than its heated counterpart. The potential of quartz extracted from mortar in a wall of a low-level radioactive-waste storage facility containing distributed sources of 60Co and 137Cs has been investigated. Dose-depth proliles based on small aliquots and single grains from the quartz extracted from the mortar samples are reported here. These are compared with results from heated quartz and polymineral fine grains extracted from an adjacent brick, and the integrated dose recorded by environmental TLDs.

Performance of electrostatic dust collectors (EDCs) for endotoxin assessment in homes: Effect of mailing, placement, heating, and electrostatic charge.

PubMed

Kilburg-Basnyat, Brita; Metwali, Nervana; Thorne, Peter S

2016-01-01

Electrostatic Dust Collectors (EDCs) are in use for passive sampling of bioaerosols, but particular aspects of their performance have not yet been evaluated. This study investigated the effect of mailing EDCs on endotoxin loading and the effect of EDC deployment in front of, and away from, heated ventilation on endotoxin sampling. Endotoxin sampling efficiency of heated and unheated EDC cloths was also evaluated. Cross-country express mailing of dust-spiked EDCs yielded no significant changes in endotoxin concentrations compared to dust-only samples for both high-spiked EDCs (p = 0.30) and low-spiked EDCs (p = 0.36). EDCs were also deployed in 20 identical apartments with one EDC placed in front of the univent heater in each apartment and contemporaneous EDC placed on the built-in bookshelf in each apartment. The endotoxin concentrations were significantly different (p = 0.049) indicating that the placement of EDC does impact endotoxin sampling. Heated and unheated EDCs were deployed for 7 days in pairs in farm homes. There was a significant difference between endotoxin concentrations (p = 0.027) indicating that heating EDCs may diminish their electrostatic capabilities and impact endotoxin sampling. The last study investigated the electrostatic charge of 12 heated and 12 unheated EDC cloths. There was a significant difference in charge (p = 0.009) which suggests that heating EDC cloths may make them less effective for sampling. In conclusion, EDCs can be mailed to and from deployment sites, EDC placement in relationship to ventilation is crucial, and heating EDCs reduces their electrostatic charge which may diminish their endotoxin sampling capabilities.

Experimental study of boundary layer transition with elevated freestream turbulence on a heated flat plate

NASA Technical Reports Server (NTRS)

Sohn, Ki-Hyeon; Reshotko, Eli

1991-01-01

A detailed investigation to document momentum and thermal development of boundary layers undergoing natural transition on a heated flat plate was performed. Experimental results of both overall and conditionally sampled characteristics of laminar, transitional, and low Reynolds number turbulent boundary layers are presented. Measurements were acquired in a low-speed, closed-loop wind tunnel with a freestream velocity of 100 ft/s and zero pressure gradient over a range of freestream turbulence intensities (TI) from 0.4 to 6 percent. The distributions of skin friction, heat transfer rate and Reynolds shear stress were all consistent with previously published data. Reynolds analogy factors for R(sub theta) is less than 2300 were found to be well predicted by laminar and turbulent correlations which accounted for an unheated starting length. The measured laminar value of Reynolds analogy factor was as much as 53 percent higher than the Pr(sup -2/3). A small dependence of turbulent results on TI was observed. Conditional sampling performed in the transitional boundary layer indicated the existence of a near-wall drop in intermittency, pronounced at certain low intermittencies, which is consistent with the cross-sectional shape of turbulent spots observed by others. Non-turbulent intervals were observed to possess large magnitudes of near-wall unsteadiness and turbulent intervals had peak values as much as 50 percent higher than were measured at fully turbulent stations. Non-turbulent and turbulent profiles in transitional boundary layers cannot be simply treated as Blasius and fully turbulent profiles, respectively. The boundary layer spectra indicate predicted selective amplification of T-S waves for TI is approximately 0.4 percent. However, for TI is approximately 0.8 and 1.1 percent, T-S waves are localized very near the wall and do not play a dominant role in transition process.

A Novel Sensor Based on a Single-Pixel Microwave Radiometer for Warm Object Counting: Concept Validation and IoT Perspectives

PubMed Central

Alimenti, Federico; Bonafoni, Stefania; Roselli, Luca

2017-01-01

Controlled measurements by a low-cost single-pixel microwave radiometer operating at 12.65 GHz were carried out to assess the detection and counting capability for targets warmer than the surroundings. The adopted reference test targets were pre-warmed water and oil; and a hand, both naked and wearing a glove. The results showed the reliability of microwave radiometry for counting operations under controlled conditions, and its effectiveness at detecting even warm targets masked by unheated dielectric layers. An electromagnetic model describing the scenario sensed by the radiometer antenna is proposed, and comparison with the experimental observations shows a good agreement. The measurements prove that reliable counting is enabled by an antenna temperature increment, for each target sample added, of around 1 K. Starting from this value, an analysis of the antenna filling factor was performed to provide an instrument useful for evaluating real applicability in many practical situations. This study also allows the direct people counting problem to be addressed, providing preliminary operational indications, reference numbers and experimental validation. PMID:28613264

Data Report: Meteorological and Evapotranspiration Data from Sagebrush and Pinyon Pine/Juniper Communities at Pahute Mesa, Nevada National Security Site, 2011-2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jasoni, Richard L; Larsen, Jessica D; Lyles, Brad F.

Pahute Mesa is a groundwater recharge area at the Nevada National Security Site. Because underground nuclear testing was conducted at Pahute Mesa, groundwater recharge may transport radionuclides from underground test sites downward to the water table; the amount of groundwater recharge is also an important component of contaminant transport models. To estimate the amount of groundwater recharge at Pahute Mesa, an INFIL3.0 recharge-runoff model is being developed. Two eddy covariance (EC) stations were installed on Pahute Mesa to estimate evapotranspiration (ET) to support the groundwater recharge modeling project. This data report describes the methods that were used to estimate ETmore » and collect meteorological data. Evapotranspiration was estimated for two predominant plant communities on Pahute Mesa; one site was located in a sagebrush plant community, the other site in a pinyon pine/juniper community. Annual ET was estimated to be 310±13.9 mm for the sagebrush site and 347±15.9 mm for the pinyon pine/juniper site (March 26, 2011 to March 26, 2012). Annual precipitation measured with unheated tipping bucket rain gauges was 179 mm at the sagebrush site and 159 mm at the pinyon pine/juniper site. Annual precipitation measured with bulk precipitation gauges was 222 mm at the sagebrush site and 227 mm at the pinyon pine/juniper site (March 21, 2011 to March 28, 2012). A comparison of tipping bucket versus bulk precipitation data showed that total precipitation measured by the tipping bucket rain gauges was 17 to 20 percent lower than the bulk precipitation gauges. These differences were most likely the result of the unheated tipping bucket precipitation gauges not measuring frozen precipitation as accurately as the bulk precipitation gauges. In this one-year study, ET exceeded precipitation at both study sites because estimates of ET included precipitation that fell during the winter of 2010-2011 prior to EC instrumentation and the precipitation gauges started collecting data in March 2011.« less

Performance of Electrostatic Dust Collectors (EDCs) for Endotoxin Assessment in Homes: Effect of Mailing, Placement, Heating and Electrostatic Charge

PubMed Central

Kilburg-Basnyat, Brita; Metwali, Nervana; Thorne, Peter S.

2016-01-01

Electrostatic Dust Collectors (EDCs) are in use for passive sampling of bioaerosols, but particular aspects of their performance have not yet been evaluated. This study investigated the effect of mailing EDCs on endotoxin loading and the effect of EDC deployment in front of and away from heated ventilation on endotoxin sampling. Endotoxin sampling efficiency of heated and unheated EDC cloths was also evaluated. Cross-country express mailing of dust-spiked EDCs yielded no significant changes in endotoxin concentrations compared to dust-only samples for both high spiked-EDCs (p=0.30) and low spiked-EDCs (p=0.36). EDCs were also deployed in 20 identical apartments with one EDC placed in front of the univent heater in each apartment and contemporaneous EDC placed on the built-in bookshelf in each apartment. The endotoxin concentrations were significantly different (p=0.049) indicating that the placement of EDC does impact endotoxin sampling. Heated and unheated EDCs were deployed for 7 days in pairs in farm homes. There was a significant difference between endotoxin concentrations (p=0.027) indicating that heating EDCs may diminish their electrostatic capabilities and impact endotoxin sampling. The last study investigated the electrostatic charge of 12 heated and 12 unheated EDC cloths. There was a significant difference in charge (p=0.009) which suggests that heating EDC cloths may make them less effective for sampling. In conclusion, EDCs can be mailed to and from deployment sites, EDC placement in relationship to ventilation is crucial, and heating EDCs reduces their electrostatic charge which may diminish their endotoxin sampling capabilities. PMID:26325020

Soil Conditions That Can Alter Natural Suppression of Escherichia coli O157:H7 in Ohio Specialty Crop Soils

PubMed Central

Williams, Michele L.; LeJeune, Jeffrey T.

2015-01-01

Food-borne pathogen persistence in soil fundamentally affects the production of safe vegetables and small fruits. Interventions that reduce pathogen survival in soil would have positive impacts on food safety by minimizing preharvest contamination entering the food chain. Laboratory-controlled studies determined the effects of soil pH, moisture content, and soil organic matter (SOM) on the survivability of this pathogen through the creation of single-parameter gradients. Longitudinal field-based studies were conducted in Ohio to quantify the extent to which field soils suppressed Escherichia coli O157:H7 survival. In all experiments, heat-sensitive microorganisms were responsible for the suppression of E. coli O157 in soil regardless of the chemical composition of the soil. In laboratory-based studies, soil pH and moisture content were primary drivers of E. coli O157 survival, with increases in pH after 48 h (P = 0.02) and decreases in moisture content after 48 h (P = 0.007) significantly increasing the log reduction of E. coli O157 numbers. In field-based experiments, E. coli O157 counts from both heated and unheated samples were sensitive to both season (P = 0.004 for heated samples and P = 0.001 for unheated samples) and region (P = 0.002 for heated samples and P = 0.001 for unheated samples). SOM was observed to be a more significant driver of pathogen suppression than the other two factors after 48 h at both planting and harvest (P = 0.002 at planting and P = 0.058 at harvest). This research reinforces the need for both laboratory-controlled experiments and longitudinal field-based experiments to unravel the complex relationships controlling the survival of introduced organisms in soil. PMID:25934621

Effect of altering starting length and activation timing of muscle on fiber strain and muscle damage.

PubMed

Butterfield, Timothy A; Herzog, Walter

2006-05-01

Muscle strain injuries are some of the most frequent injuries in sports and command a great deal of attention in an effort to understand their etiology. These injuries may be the culmination of a series of subcellular events accumulated through repetitive lengthening (eccentric) contractions during exercise, and they may be influenced by a variety of variables including fiber strain magnitude, peak joint torque, and starting muscle length. To assess the influence of these variables on muscle injury magnitude in vivo, we measured fiber dynamics and joint torque production during repeated stretch-shortening cycles in the rabbit tibialis anterior muscle, at short and long muscle lengths, while varying the timing of activation before muscle stretch. We found that a muscle subjected to repeated stretch-shortening cycles of constant muscle-tendon unit excursion exhibits significantly different joint torque and fiber strains when the timing of activation or starting muscle length is changed. In particular, measures of fiber strain and muscle injury were significantly increased by altering activation timing and increasing the starting length of the muscle. However, we observed differential effects on peak joint torque during the cyclic stretch-shortening exercise, as increasing the starting length of the muscle did not increase torque production. We conclude that altering activation timing and muscle length before stretch may influence muscle injury by significantly increasing fiber strain magnitude and that fiber dynamics is a more important variable than muscle-tendon unit dynamics and torque production in influencing the magnitude of muscle injury.

Heated apple juice supplemented with onion has greatly improved nutritional quality and browning index.

PubMed

Lee, Bonggi; Seo, Jeong Dae; Rhee, Jin-Kyu; Kim, Choon Young

2016-06-15

Although fruit juices are very popular, enzymatic browning occurs easily. Browning of fruit juice deteriorates nutrition value and product quality due to oxidation of polyphenol compounds. Therefore, development of natural food additives that reduce browning will be beneficial for improving quality of fruit juices. Onion has been reported to be a potent natural anti-browning agent. Here, we compared unheated and heated apple juices pre-supplemented with onion with respect to browning and nutritional quality. The unheated apple juice supplemented with onion showed reduced browning as well as increased total soluble solid, total phenol concentration, radical scavenging activities, and ferric reducing and copper chelating activities without any change in flavonoid concentration. On the other hand, heated juice supplemented with onion not only showed improved values for these parameters but also markedly increased flavonoid concentration. Thus, we conclude that application of heating and onion addition together may greatly improve quality of apple juice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Susceptibility of phaseolin to in vitro proteolysis is highly variable across common bean varieties (Phaseolus vulgaris).

PubMed

Montoya, Carlos A; Leterme, Pascal; Victoria, Nestor F; Toro, Orlando; Souffrant, Wolfgang B; Beebe, Stephen; Lallès, Jean-Paul

2008-03-26

A study was conducted to investigate the amino acid (AA) composition and the susceptibility to in vitro proteolysis (pepsin, 120 min and pancreatin, 240 min) of a collection of purified phaseolins ( n = 43) in unheated or heat-treated form. The AA composition of phaseolin varied little across bean varieties. At 360 min of in vitro proteolysis, the degree of hydrolysis varied from 11 to 27% for unheated and from 57 to 96% for heated phaseolins ( P < 0.001). Heat treatment markedly increased the susceptibility of phaseolin to proteolysis ( P < 0.001). The AA scores (AAS) and the protein digestibility corrected for AAS indicated S-containing AA as the limiting AA (39 +/- 3 and 30 +/- 5%, respectively). In conclusion, susceptibility to proteolysis of heat-treated phaseolin rather than its AA composition affects the nutritional value of phaseolin estimated in vitro. Therefore, it should be the criterion of choice in breeding programs aimed at improving the nutritional value of common beans for humans.

Internal Mixing Studied for GE/ARL Ejector Nozzle

NASA Technical Reports Server (NTRS)

Zaman, Khairul

2005-01-01

To achieve jet noise reduction goals for the High Speed Civil Transport aircraft, researchers have been investigating the mixer-ejector nozzle concept. For this concept, a primary nozzle with multiple chutes is surrounded by an ejector. The ejector mixes low-momentum ambient air with the hot engine exhaust to reduce the jet velocity and, hence, the jet noise. It is desirable to mix the two streams as fast as possible in order to minimize the length and weight of the ejector. An earlier model of the mixer-ejector nozzle was tested extensively in the Aerodynamic Research Laboratory (ARL) of GE Aircraft Engines at Cincinnati, Ohio. While testing was continuing with later generations of the nozzle, the earlier model was brought to the NASA Lewis Research Center for relatively fundamental measurements. Goals of the Lewis study were to obtain details of the flow field to aid computational fluid dynamics (CFD) efforts and obtain a better understanding of the flow mechanisms, as well as to experiment with mixing enhancement devices, such as tabs. The measurements were made in an open jet facility for cold (unheated) flow without a surrounding coflowing stream.

Warming Contracts Flowering Phenology in an Alpine Ecosystem

NASA Astrophysics Data System (ADS)

Jabis, M. D.; Winkler, D. E.; Kueppers, L. M.

2015-12-01

In alpine ecosystems where temperature increases associated with anthropogenic climate change are likely to be amplified, the flowering phenology of plants may be particularly sensitive to changes in environmental signals. For example, earlier snowmelt and higher temperature have been found to be important factors driving plant emergence and onset of flowering. However, few studies have examined the interactive role of soil moisture in response to warming. Using infrared heating to actively warm plots crossed with manual watering over the growing season in a moist alpine meadow at Niwot Ridge, Colorado, our preliminary results indicate that community-level phenology (length of flowering time across all species) was contracted with heating but was unaffected by watering. At the species level, additional water extended the length of the flowering season by one week for almost half (43%) of species. Heating, which raised plant and surface soil temperatures (+1.5 C) advanced snowmelt by ~7.6 days days and reduced soil moisture by ~2%, advanced flowering phenology for 86% of species. The response of flowering phenology to combined heating and watering was predominantly a heating effect. However, watering did appear to mitigate advances in end of flowering for 22% of species. The length of flowering season, for some species, appears to be tied, in part, to moisture availability as alleviating ambient soil moisture stress delayed phenology in unheated plots. Therefore, we conclude that both temperature and moisture appear to be important factors driving flowering phenology in this alpine ecosystem. The relationship between flowering phenology and species- or community-level productivity is not well established, but heating advanced community peak productivity by 5.4 days, and also reduced peak productivity unless additional water was provided, indicating some consistency between drivers of productivity and drivers of flowering phenology.

Heat transfer in pipes

NASA Technical Reports Server (NTRS)

Burbach, T.

1985-01-01

The heat transfer from hot water to a cold copper pipe in laminar and turbulent flow condition is determined. The mean flow through velocity in the pipe, relative test length and initial temperature in the vessel were varied extensively during tests. Measurements confirm Nusselt's theory for large test lengths in laminar range. A new equation is derived for heat transfer for large starting lengths which agrees satisfactorily with measurements for large starting lengths. Test results are compared with the new Prandtl equation for heat transfer and correlated well. Test material for 200- and to 400-diameter test length is represented at four different vessel temperatures.

A compact, rugged, high repetition rate CO2 laser incorporating catalyst

NASA Technical Reports Server (NTRS)

Schwarzenberger, P. M.; Matzangou, X.

1990-01-01

The principal design features and operating characteristics of a high repetition rate CO2 laser are outlined. The laser is a compact, rugged unit, completely sealed and incorporating an unheated solid catalyst. Stable operation has been successfully demonstrated over a temperature range of -35 C to 65 C.

40 CFR 420.100 - Applicability; description of the cold forming subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY Cold Forming... works from cold rolling and cold working pipe and tube operations in which unheated steel is passed... controlled mechanical properties in the steel. (b) The limitations and standards set out below for cold...

Relative solvation free energies calculated using an ab initio QM/MM-based free energy perturbation method: dependence of results on simulation length.

PubMed

Reddy, M Rami; Erion, Mark D

2009-12-01

Molecular dynamics (MD) simulations in conjunction with thermodynamic perturbation approach was used to calculate relative solvation free energies of five pairs of small molecules, namely; (1) methanol to ethane, (2) acetone to acetamide, (3) phenol to benzene, (4) 1,1,1 trichloroethane to ethane, and (5) phenylalanine to isoleucine. Two studies were performed to evaluate the dependence of the convergence of these calculations on MD simulation length and starting configuration. In the first study, each transformation started from the same well-equilibrated configuration and the simulation length was varied from 230 to 2,540 ps. The results indicated that for transformations involving small structural changes, a simulation length of 860 ps is sufficient to obtain satisfactory convergence. In contrast, transformations involving relatively large structural changes, such as phenylalanine to isoleucine, require a significantly longer simulation length (>2,540 ps) to obtain satisfactory convergence. In the second study, the transformation was completed starting from three different configurations and using in each case 860 ps of MD simulation. The results from this study suggest that performing one long simulation may be better than averaging results from three different simulations using a shorter simulation length and three different starting configurations.

An Empirical Jet-Surface Interaction Noise Model with Temperature and Nozzle Aspect Ratio Effects

NASA Technical Reports Server (NTRS)

Brown, Cliff

2015-01-01

An empirical model for jet-surface interaction (JSI) noise produced by a round jet near a flat plate is described and the resulting model evaluated. The model covers unheated and hot jet conditions (1 less than or equal to jet total temperature ratio less than or equal to 2.7) in the subsonic range (0.5 less than or equal to M(sub a) less than or equal to 0.9), surface lengths 0.6 less than or equal to (axial distance from jet exit to surface trailing edge (inches)/nozzle exit diameter) less than or equal to 10, and surface standoff distances (0 less than or equal to (radial distance from jet lipline to surface (inches)/axial distance from jet exit to surface trailing edge (inches)) less than or equal to 1) using only second-order polynomials to provide predictable behavior. The JSI noise model is combined with an existing jet mixing noise model to produce exhaust noise predictions. Fit quality metrics and comparisons to between the predicted and experimental data indicate that the model is suitable for many system level studies. A first-order correction to the JSI source model that accounts for the effect of nozzle aspect ratio is also explored. This correction is based on changes to the potential core length and frequency scaling associated with rectangular nozzles up to 8:1 aspect ratio. However, more work is needed to refine these findings into a formal model.

Trends and Variability of the Outdoor Skating Season in Canada during 1951-2005

NASA Astrophysics Data System (ADS)

Damyanov, Nikolay Nikolaev

Climate change affects a range of human activities, including one of Canada's prime sources of entertainment: ice skating. Whether done recreationally or as hockey, its outdoor component is heavily dependent on weather and climate. Based on information obtained from public works officials from various Canadian cities, I have established a meteorological criterion for the initiation of an outdoor skating season (OSS) as the last day in a sequence of the first three consecutive fall/winter days with a maximum temperature below -5 °C. In addition, I derive a proxy of the OSS length, defined as the total number of days with a maximum temperature below -5 °C after the OSS start date and before the start of March. Using these filters, I have extracted the start dates and the lengths of the OSS for each year during the fifty-five year period 1951-2005 from a comprehensive daily temperature dataset (Vincent et al., 2002). For each station, I created time series of both the OSS start dates and OSS lengths, and calculated the magnitude, sign and statistical significance of the slopes of the best-fit lines to each time series. In order to establish a relationship of the OSS with large-scale climate patterns, I grouped stations into six climatic regions. Depending on location, I then tested each region for correlation with the Pacific North-American teleconnection pattern (PNA) or the North Atlantic Oscillation (NAO), using a composite analysis method. Lastly, I removed the signal due to these climate fluctuations from the OSS start date and length trends in order to determine how much of the variability was caused by these interannual climate oscillations. The results of the study indicate that most stations in British Columbia and southwest Alberta, as well as these in the southern Ontario/Quebc region have witnessed a progressively later onset of the OSS over time. The Prairies, northwest Canada, and some Maritime locales show the opposite trend, although the magnitudes of the slopes are smaller. Significance tests on the regression lines show that most of these trends are not significant at the 95% level. However, OSS start dates in western Canada are very well correlated with PNA patterns by happening later on the average whenever PNA is positive and more warm air is channeled towards the west coast; the OSS start dates in eastern Canada show a similar connection with the NAO. The OSS lengths exhibit different trends: five of the six regions show a decrease in OSS length with the only region having experienced a lengthening of the OSS being the Maritimes. The statistical significance of the OSS length slopes is much higher than that of OSS start slopes, and the correlation with the PNA or NAO is similar in both cases. After carrying out the last procedure (removal of the PNA and NAO signals from the OSS start date and length series), I found an increase in the new slopes and their significance for more than half of my geographic regions' OSS start date and length trends.

The effect of carbon chain length of starting materials on the formation of carbon dots and their optical properties

NASA Astrophysics Data System (ADS)

Pan, Xiaohua; Zhang, Yan; Sun, Xiaobo; Pan, Wei; Yu, Guifeng; Si, Shuxin; Wang, Jinping

2018-04-01

Carbon dots (CDs) have attracted increasing attention due to their high performances and potential applications in wide range of areas. However, their emission mechanism is not clear so far. In order to reveal more factors contributing to the emission of CDs, the effect of carbon chain length of starting materials on the formation of CDs and their optical properties was experimentally investigated in this work. In order to focus on the effect of carbon chain length, the starting materials with C, O, N in fully identical forms and only carbon chain lengths being different were selected for synthesizing CDs, including citric acid (CA) and adipic acid (AA) as carbon sources, and diamines with different carbon chain lengths (H2N(CH2)nNH2, n = 2, 4, 6) as nitrogen sources, as well as ethylenediamine (EDA) as nitrogen source and diacids with different carbon chain lengths (HOOC(CH2)nCOOH, n = 0, 2, 4, 6) as carbon sources. Therefore, the effect of carbon chain length of starting materials on the formation and optical properties of CDs can be systematically investigated by characterizing and comparing the structures and optical properties of as-prepared nine types of CDs. Moreover, the density of –NH2 on the surface of the CDs was quantitatively detected by a spectrophotometry so as to elucidate the relationship between the –NH2 related surface state and the optical properties.

Controlled warming effects on wheat growth and yield: field measurements and modeling

USDA-ARS?s Scientific Manuscript database

Climate warming may raise wheat yields in cooler climates and lower them in warmer. To understand these contrasting effects, infrared heating lamps were used to warm irrigated spring wheat by 1.5 'C (day) and 3.0 'C (night) above unheated controls during different times of the year at Maricopa, AZ. ...

Using canopy resistance for infrared heater control when warming open-field plots

USDA-ARS?s Scientific Manuscript database

Several research groups are using or planning to use arrays of infrared heaters to simulate global warming in open-field plots with a control strategy that involves maintaining a constant rise in canopy temperatures of the heated plots above those of un-heated Reference plots. . However, if the warm...

Structural change of the frustule of diatom by thermal treatment

NASA Astrophysics Data System (ADS)

Arasuna, Akane; Okuno, Masayuki

2018-12-01

The external skeleton, frustule, of a diatom is composed of hydrous amorphous silica and amino acids. In this study, the structural changes in the frustule of Chaetoceros calcitrans after thermal treatment up to 1200 °C were investigated using X-ray diffraction and attenuated total reflection infrared spectroscopy and Raman spectroscopy. Their structural changes after thermal treatment give important information to elucidate the unheated structure of the frustule and its crystallization process. In addition, this study is almost the first report to discuss the structure of diatom frustule in detail with Raman spectrum. The unheated structure of the frustule has the relatively ordered and dominant six-membered ring structure made of SiO4 tetrahedra. The sample heated at 800 °C has the more ordered six-membered ring structure observed in quartz or cristobalite. Water molecules and silanol (Si-OH) included in the frustule are dehydrated at this temperature. This dehydration may promote the formation of ordered and polymerized structure. The structure of the frustule after heating at 1200 °C is similar to that of low-cristobalite. However, additional heating is required for complete crystallization.

Effects of blanching on polyphenol stability of innovative paste-like parsley (Petroselinum crispum (Mill.) Nym ex A. W. Hill) and marjoram (Origanum majorana L.) products.

PubMed

Kaiser, Andrea; Carle, Reinhold; Kammerer, Dietmar R

2013-06-01

Fresh herbs were water- and steam-blanched at 90-100°C and 100°C, respectively, for 1-10 min and 30 s to 7 min for parsley and marjoram, respectively, and subsequently minced to obtain a paste. For the first time, phenolic compounds of unheated marjoram were characterised by high-performance liquid chromatography coupled to mass spectrometry (HPLC-MS). Hereby, 10 phenolics were detected. Among them, apigenin-glucuronide, lucenin-2 and lithospermic acid were tentatively identified for the first time. In unheated parsley, apart from the major compound apiin, 10 further phenolics were characterised including several p-coumaric acid derivatives which were newly detected. Except for apiin, short-time steam- and water-blanching (1 min), respectively, did not cause significant losses of phenolic compounds, and thus proved to be the most suitable measures to ensure polyphenol retention. Consequently, blanching is a recommendable initial operation in the processing of parsley and marjoram into novel paste-like products. Copyright © 2012 Elsevier Ltd. All rights reserved.

Heating Has No Effect on the Net Protein Utilisation from Egg Whites in Rats.

PubMed

Matsuoka, Ryosuke; Takahashi, Yayoi; Kimura, Mamoru; Masuda, Yasunobu; Kunou, Masaaki

2017-01-01

Egg whites (EW) are a good source of protein; however, they are typically heated prior to consumption. Therefore, we investigated the effects of different heating conditions on the protein utilisation rate of EW. Male Sprague-Dawley rats ( n = 36, 198 ± 1 g) were divided into six groups and fed American Institute of Nutrition-76 chow containing unheated EW, soft-boiled EW, boiled EW, milk whey protein, soybean protein, or no protein over a 10-day period using pair-feeding. Urine and faeces were sampled daily beginning on day 5 to measure nitrogen content and the net protein utilisation (NPU) rate. The soybean protein group had a significantly lower level of food intake and was thus excluded from subsequent analyses. The NPU value was similar among the unheated, soft-boiled, and boiled EW groups (97.5 ± 0.4, 96.5 ± 0.1, and 96.5 ± 0.7, resp.). The EW group values were significantly higher than the whey group values (90.5 ± 1.0). These results show that EW serve as a good source of protein, irrespective of heating.

Impact of elevated carbon dioxide on soil heat storage and heat flux under unheated low-tunnels conditions.

PubMed

Al-Kayssi, A W; Mustafa, S H

2016-11-01

Suboptimal regimes of air and soil temperature usually occur under unheated low-tunnels during winter crop cycles. CO2 is one of the most important gases linked to climate change and posing challenge to the current agricultural productivity. Field experiment was conducted in unheated low-tunnels (10.0 m long, 1.5 m wide and 1.0 m high) during winter and spring periods to evaluate the increasing CO2 concentration (352, 709, 1063, 1407, and 1761 ppm) on net radiation budget, soil-air thermal regime and pepper plants growth development and yield. CO2 was injected into each hollow space of the tunnel double-layer transparent polyethylene covers. Recorded integral net longwave radiation increased from 524.81 to 1111.84 Wm(-2) on January when CO2 concentration increased from 352 to 1761 ppm. A similar trend was recorded on February. Moreover, minimum soil surface and air temperatures were markedly increased from -1.3 and -6.8 °C to 3.4 and 0.6 °C, when CO2 concentration increased from 352 to 1761 ppm. Additionally, soil heat flux as well as soil heat storage increased with increasing CO2 concentrations accordingly. Increasing the tunnel minimum air and soil temperatures with the CO2 concentration treatments 1063, 1407 and 1761 ppm reflected in a significant pepper yield (3.19, 5.06 and 6.13 kg m(-2)) due to the modification of the surrounding plants microenvironment and prevented pepper plants from freezing and the accelerated the plant growth. On the contrary, the drop of minimum air and soil temperatures to freezing levels with the CO2 concentration treatments 352 and 709 ppm resulted in the deterioration of pepper plants development during the early growth stages on January. Copyright © 2016 Elsevier Ltd. All rights reserved.

The NASA Subsonic Jet Particle Image Velocimetry (PIV) Dataset

NASA Technical Reports Server (NTRS)

Bridges, James; Wernet, Mark P.

2011-01-01

Many tasks in fluids engineering require prediction of turbulence of jet flows. The present document documents the single-point statistics of velocity, mean and variance, of cold and hot jet flows. The jet velocities ranged from 0.5 to 1.4 times the ambient speed of sound, and temperatures ranged from unheated to static temperature ratio 2.7. Further, the report assesses the accuracies of the data, e.g., establish uncertainties for the data. This paper covers the following five tasks: (1) Document acquisition and processing procedures used to create the particle image velocimetry (PIV) datasets. (2) Compare PIV data with hotwire and laser Doppler velocimetry (LDV) data published in the open literature. (3) Compare different datasets acquired at the same flow conditions in multiple tests to establish uncertainties. (4) Create a consensus dataset for a range of hot jet flows, including uncertainty bands. (5) Analyze this consensus dataset for self-consistency and compare jet characteristics to those of the open literature. The final objective was fulfilled by using the potential core length and the spread rate of the half-velocity radius to collapse of the mean and turbulent velocity fields over the first 20 jet diameters.

Method of inducing differential etch rates in glow discharge produced amorphous silicon

DOEpatents

Staebler, David L.; Zanzucchi, Peter J.

1980-01-01

A method of inducing differential etch rates in glow discharge produced amorphous silicon by heating a portion of the glow discharge produced amorphous silicon to a temperature of about 365.degree. C. higher than the deposition temperature prior to etching. The etch rate of the exposed amorphous silicon is less than the unheated amorphous silicon.

An Evaluation of a Welding Fumes Exhaust System. Agricultural Experiment Station Research Report 284.

ERIC Educational Resources Information Center

Jacobs, C. O.

A study evaluated the feasibility of introducing unheated outside air into the airstream of a cross-flow welding exhaust system to reduce heating energy costs of a school welding laboratory. The physical facility used was the agricultural mechanics laboratory at the University of Arizona, which is similar to facilities in which instruction in…

Effects of backing board materials on wood combustion performance

Treesearch

Mathew J. Hagge; Kenneth M. Bryden; Mark A. Dietenberger

2004-01-01

Cone calorimeter tests show that backing board materials do not affect the ignition time, initial heat release rate, or the total heat released of combustion for redwood slabs. However, it has been observed that backing board materials alter combustion performance by altering the secondary heat release peak observed when the pyrolysis reaction front nears the unheated...

Digestibility and antigenicity of β-lactoglobulin as affected by heat, pH and applied shear.

PubMed

Rahaman, Toheder; Vasiljevic, Todor; Ramchandran, Lata

2017-02-15

Processing induced conformational changes can modulate digestibility of food allergens and thereby their antigenicity. Effect of different pH (3, 5, 7), temperature (room temperature, 120°C) and shear (0s(-1), 1000s(-1)) on simulated gastrointestinal digestibility of β-lg and post digestion antigenic characteristics have been studied. At all pH levels unheated β-lg showed resistance to peptic digestion with high antigenic value while it was fairly susceptible to pancreatin with moderate reduction in antigenicity. Heating at 120°C significantly improved both peptic and pancreatic digestion attributed to structural alterations that resulted in much lower antigenicity; the level of reduction being pH dependant. The lowest antigenicity was recorded at pH 5. Shearing (1000s(-1)) had a minor impact reducing digestibility and thereby enhancing antigenicity of unheated β-lg at pH 5 and 7 slightly; however in conjunction with heating (120°C) it reduced antigenicity further irrespective of the pH. Overall, treatment at pH 5, 120°C and 1000s(-1) could potentially reduce post digestion antigenicity of β-lg. Copyright © 2016. Published by Elsevier Ltd.

Experiments on fuel heating for commercial aircraft

NASA Technical Reports Server (NTRS)

Friedman, R.; Stockemer, F. J.

1982-01-01

An experimental jet fuel with a -33 C freezing point was chilled in a wing tank simulator with superimposed fuel heating to improve low temperature flowability. Heating consisted of circulating a portion of the fuel to an external heat exchanger and returning the heated fuel to the tank. Flowability was determined by the mass percent of unpumpable fuel (holdup) left in the simulator upon withdrawal of fuel at the conclusion of testing. The study demonstrated that fuel heating is feasible and improves flowability as compared to that of baseline, unheated tests. Delayed heating with initiation when the fuel reaches a prescribed low temperature limit, showed promise of being more efficient than continuous heating. Regardless of the mode or rate of heating, complete flowability (zero holdup) could not be restored by fuel heating. The severe, extreme-day environment imposed by the test caused a very small amount of subfreezing fuel to be retained near the tank surfaces even at high rates of heating. Correlations of flowability established for unheated fuel tests also could be applied to the heated test results if based on boundary-layer temperature or a solid index (subfreezing point) characteristic of the fuel.

Heating Has No Effect on the Net Protein Utilisation from Egg Whites in Rats

PubMed Central

Takahashi, Yayoi; Kimura, Mamoru; Masuda, Yasunobu; Kunou, Masaaki

2017-01-01

Egg whites (EW) are a good source of protein; however, they are typically heated prior to consumption. Therefore, we investigated the effects of different heating conditions on the protein utilisation rate of EW. Male Sprague-Dawley rats (n = 36, 198 ± 1 g) were divided into six groups and fed American Institute of Nutrition-76 chow containing unheated EW, soft-boiled EW, boiled EW, milk whey protein, soybean protein, or no protein over a 10-day period using pair-feeding. Urine and faeces were sampled daily beginning on day 5 to measure nitrogen content and the net protein utilisation (NPU) rate. The soybean protein group had a significantly lower level of food intake and was thus excluded from subsequent analyses. The NPU value was similar among the unheated, soft-boiled, and boiled EW groups (97.5 ± 0.4, 96.5 ± 0.1, and 96.5 ± 0.7, resp.). The EW group values were significantly higher than the whey group values (90.5 ± 1.0). These results show that EW serve as a good source of protein, irrespective of heating. PMID:28337477

10 CFR Appendix D1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Uniform Test Method for Measuring the Energy Consumption... Appendix D1 to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Clothes... without heated or unheated forced air circulation to remove moisture from the clothing, remove wrinkles or...

10 CFR Appendix D1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Uniform Test Method for Measuring the Energy Consumption... Appendix D1 to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Clothes... without heated or unheated forced air circulation to remove moisture from the clothing, remove wrinkles or...

Building and using our sun-heated greenhouse. Grow vegetables all year-round

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nearing, H.; Nearing, S.

1977-01-01

Experience with unheated greenhouses in Maine and Vermont is described from the viewpoint of vegetarian, homesteading organic gardeners. The necessity of extending the growing season in the north in order to have fresh vegetables year round is discussed. Locating, building, and maintaining soil and growing conditions in the greenhouse are included. Plants for each season in the greenhouse are discussed. (MHR)

Experimental and Analytical Development of the Application of a Transit Laser Velocimeter

DTIC Science & Technology

1980-11-01

from 0.005" brass shim stock with carefully finished edges and chemically blackened surface and is slightly adjustable in position to compensate for...personnel by Mr. T. V. C i e l , ETF . Mr. V i r g i l Cline, PWr, and t h e f a c i l i t y technic ians . A 1" diameter underexpanded unheated

Recent developments in BWR fuel design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Congdon, S.P.; Noble, L.D.; Wood, J.E.

1991-11-01

Substantial increases in the cost effectiveness and performance capability of boiling water reactor (BWR) fuel designs have been implemented in the past 5 to 7 yr. This increase has been driven by (a) utility desires to lower fuel and operating costs and (b) design innovations that have lowered enrichment requirements, improved thermal-hydraulic performance, and increased discharge exposure. Higher discharge exposures reduce disposal costs for European and Asian utilities and enable US utilities to lengthen operating cycles. A typical BWR reload fuel bundle fabricated today has 25% higher {sup 235}U enrichment and a factor of 2 higher gadolinium loading than onemore » made several years ago. Today's BWR fuel bundles also contain more unheated water reduces the axial water density variation, lowers the void coefficient, and enhances the neutron efficiency of the bundle, reducing both the gadolinium poison and the enrichment requirements. In addition to these general trends, the following unique design innovations have further enhanced the fuel cost efficiency and performance characteristics of BWR fuel: ferrule spacer, part length rods, interactive channel, and bundle enhanced spectral shift. GE's fuel designs offer the flexibility for modern BWR fuel requirements and contain unique design features that enhance flexibility for modern BWR fuel requirements and contain unique design features that enhance flexibility and fuel cycle economics.« less

Measurement of Initial Conditions at Nozzle Exit of High Speed Jets

NASA Technical Reports Server (NTRS)

Panda, J.; Zaman, K. B. M. Q.; Seasholtz, R. G.

2004-01-01

The time averaged and unsteady density fields close to the nozzle exit (0.1 less than or = x/D less than or = 2, x: downstream distance, D: jet diameter) of unheated free jets at Mach numbers of 0.95, 1.4, and 1.8 were measured using a molecular Rayleigh scattering based technique. The initial thickness of shear layer and its linear growth rate were determined from time-averaged density survey and a modeling process, which utilized the Crocco-Busemann equation to relate density profiles to velocity profiles. The model also corrected for the smearing effect caused by a relatively long probe length in the measured density data. The calculated shear layer thickness was further verified from a limited hot-wire measurement. Density fluctuations spectra, measured using a two-Photomultiplier-tube technique, were used to determine evolution of turbulent fluctuations in various Strouhal frequency bands. For this purpose spectra were obtained from a large number of points inside the flow; and at every axial station spectral data from all radial positions were integrated. The radially-integrated fluctuation data show an exponential growth with downstream distance and an eventual saturation in all Strouhal frequency bands. The initial level of density fluctuations was calculated by extrapolation to nozzle exit.

Noise prediction of a subsonic turbulent round jet using the lattice-Boltzmann method

PubMed Central

Lew, Phoi-Tack; Mongeau, Luc; Lyrintzis, Anastasios

2010-01-01

The lattice-Boltzmann method (LBM) was used to study the far-field noise generated from a Mach, Mj=0.4, unheated turbulent axisymmetric jet. A commercial code based on the LBM kernel was used to simulate the turbulent flow exhausting from a pipe which is 10 jet radii in length. Near-field flow results such as jet centerline velocity decay rates and turbulence intensities were in agreement with experimental results and results from comparable LES studies. The predicted far field sound pressure levels were within 2 dB from published experimental results. Weak unphysical tones were present at high frequency in the computed radiated sound pressure spectra. These tones are believed to be due to spurious sound wave reflections at boundaries between regions of varying voxel resolution. These “VR tones” did not appear to bias the underlying broadband noise spectrum, and they did not affect the overall levels significantly. The LBM appears to be a viable approach, comparable in accuracy to large eddy simulations, for the problem considered. The main advantages of this approach over Navier–Stokes based finite difference schemes may be a reduced computational cost, ease of including the nozzle in the computational domain, and ease of investigating nozzles with complex shapes. PMID:20815448

Near Field Pressure Fluctuations in the Exit Plane of a Choked Axisymmetric Nozzle

NASA Technical Reports Server (NTRS)

Ponton, Michael K.; Seiner, John M.; Brown, Martha C.

1997-01-01

Nearfield pressure data are presented for an unheated jet issuing from an underexpanded sonic nozzle for two exit lip thicknesses of 0.200 and 0.625 nozzle diameters. Fluctuating measurements were obtained on the nozzle exit surface as well as in the acoustic nearfield. Narrowband spectra are presented for numerous operating conditions expressed in terms of the fully expanded Mach number based on nozzle pressure ratio.

Aerothermoelastic Topology Optimization with Flutter and Buckling Metrics (Postprint)

DTIC Science & Technology

2013-07-01

topologies of an unheated panel, thermal buckling-optimal topologies, and flutter- optimality of a heated panel (where the latter case presents a...topological compromise between the former two). The effect of various constraint boundaries, temperature gradients, and (for the flutter of the heated panel...optimality of a heated panel (where the latter case presents a topological compromise between the former two). The effect of various constraint boundaries

BNNT Growth in a Fluidized Bed Reactor

DTIC Science & Technology

2016-06-24

kinetics. Figure 1. Catalyst Screen System and 23 Factorial Design Matrix Figures 2 and 3, below, contain photographs of unheated and heated...boron that appear as black spots in each photograph . No fusion of individual lithium diborate particles is observed. Figure 4 is a photograph of a...developed at NASA [2]. Through a fortunate meeting with a former colleague at the National Institute of Aerospace (NIA), we discovered that

Preparation of C60(O)n-ZnO nanocomposite under electric furnace and photocatalytic degradation of organic dyes.

PubMed

Cho, Bum Hwi; Oh, Youn Jun; Mun, Sang Mi; Ko, Weon Bae

2012-07-01

Zinc oxide (ZnO) nanoparticles were synthesized sonochemically by applying ultrasonic irradiation to a mixed aqueous-alcoholic solution of zinc nitrate with sodium hydroxide at room temperature. The morphology and optical properties of the ZnO nanoparticles were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV-vis spectroscopy. The C60(O)n nanoparticles were synthesized by heating a mixture of C60 and 3-chloroperoxybenzoic acid in a benzene solvent under the reflux system. The heated C60(O)n-ZnO nanocomposite was synthesized in an electric furnace at 700 degrees C for two hours. The heated C60(O)n-ZnO nanocomposite was characterized by XRD, SEM, and TEM, and examined as a catalyst in the photocatalytic degradation of organic dyes by UV-vis spectroscopy. The photocatalytic effect of the heated C60(O)n-ZnO nanocomposite was evaluated by a comparison with that of unheated C60(O)n nanoparticles, heated C60(O)n nanoparticles, and unheated C60(O)n-ZnO in organic dyes, such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) under ultraviolet light at 365 nm.

Prediction of Turbulence-Generated Noise in Unheated Jets. Part 2; JeNo Users' Manual (Version 1.0)

NASA Technical Reports Server (NTRS)

Khavaran, Abbas; Wolter, John D.; Koch, L. Danielle

2009-01-01

JeNo (Version 1.0) is a Fortran90 computer code that calculates the far-field sound spectral density produced by axisymmetric, unheated jets at a user specified observer location and frequency range. The user must provide a structured computational grid and a mean flow solution from a Reynolds-Averaged Navier Stokes (RANS) code as input. Turbulence kinetic energy and its dissipation rate from a k-epsilon or k-omega turbulence model must also be provided. JeNo is a research code, and as such, its development is ongoing. The goal is to create a code that is able to accurately compute far-field sound pressure levels for jets at all observer angles and all operating conditions. In order to achieve this goal, current theories must be combined with the best practices in numerical modeling, all of which must be validated by experiment. Since the acoustic predictions from JeNo are based on the mean flow solutions from a RANS code, quality predictions depend on accurate aerodynamic input.This is why acoustic source modeling, turbulence modeling, together with the development of advanced measurement systems are the leading areas of research in jet noise research at NASA Glenn Research Center.

POD Analysis of Jet-Plume/Afterbody-Wake Interaction

NASA Astrophysics Data System (ADS)

Murray, Nathan E.; Seiner, John M.; Jansen, Bernard J.; Gui, Lichuan; Sockwell, Shuan; Joachim, Matthew

2009-11-01

The understanding of the flow physics in the base region of a powered rocket is one of the keys to designing the next generation of reusable launchers. The base flow features affect the aerodynamics and the heat loading at the base of the vehicle. Recent efforts at the National Center for Physical Acoustics at the University of Mississippi have refurbished two models for studying jet-plume/afterbody-wake interactions in the NCPA's 1-foot Tri-Sonic Wind Tunnel Facility. Both models have a 2.5 inch outer diameter with a nominally 0.5 inch diameter centered exhaust nozzle. One of the models is capable of being powered with gaseous H2 and O2 to study the base flow in a fully combusting senario. The second model uses hi-pressure air to drive the exhaust providing an unheated representative flow field. This unheated model was used to acquire PIV data of the base flow. Subsequently, a POD analysis was performed to provide a first look at the large-scale structures present for the interaction between an axisymmetric jet and an axisymmetric afterbody wake. PIV and Schlieren data are presented for a single jet-exhaust to free-stream flow velocity along with the POD analysis of the base flow field.

An experimental investigation devoted to determine heat transfer characteristics in a radiant ceiling heating system

NASA Astrophysics Data System (ADS)

Koca, Aliihsan; Acikgoz, Ozgen; Çebi, Alican; Çetin, Gürsel; Dalkilic, Ahmet Selim; Wongwises, Somchai

2018-02-01

Investigations on heated ceiling method can be considered as a new research area in comparison to the common wall heating-cooling and cooled ceiling methods. In this work, heat transfer characteristics of a heated radiant ceiling system was investigated experimentally. There were different configurations for a single room design in order to determine the convective and radiative heat transfer rates. Almost all details on the arrangement of the test chamber, hydraulic circuit and radiant panels, the measurement equipment and experimental method including uncertainty analysis were revealed in detail indicating specific international standards. Total heat transfer amount from the panels were calculated as the sum of radiation to the unheated surfaces, convection to the air, and conduction heat loss from the backside of the panels. Integral expression of the view factors was calculated by means of the numerical evaluations using Matlab code. By means of this experimental chamber, the radiative, convective and total heat-transfer coefficient values along with the heat flux values provided from the ceiling to the unheated surrounding surfaces have been calculated. Moreover, the details of 28 different experimental case study measurements from the experimental chamber including the convective, radiative and total heat flux, and heat output results are given in a Table for other researchers to validate their theoretical models and empirical correlations.

Public transportation : better data needed to assess length of New Starts process, and options exist to expedite project development.

DOT National Transportation Integrated Search

2009-08-01

The New Starts program is an important source of new capital investment in mass transportation. To be eligible for federal funding, a project must advance through the different project development phases of the New Starts program, including alternati...

Transport Imaging of Multi-Junction and CIGS Solar Cell Materials

DTIC Science & Technology

2011-12-01

solar cells start with the material charge transport parameters, namely the charge mobility, lifetime and diffusion length . It is the goal of...every solar cell manufacturer to maintain high carrier lifetime so as to realize long diffusion lengths . Long diffusion lengths ensure that the charges...Thus, being able to accurately determine the diffusion length of any solar cell material proves advantageous by providing insights

Ambient Temperature, Fuel Economy, Emissions, and Trip Length

DOT National Transportation Integrated Search

1979-08-01

This report examines the relationship among automotive fuel economy, ambient temperature, cold-start trip length, and drive-train component temperatures of four 1977 vehicles. Fuel economy, exhaust emission, and drive-train temperatures were measured...

Investigation of the effects of a moving acoustic medium on jet noise measurements

NASA Technical Reports Server (NTRS)

Cole, J. E., III; Palmer, D. W.

1976-01-01

Noise from an unheated sonic jet in the presence of an external flow is measured in a free-jet wind tunnel using microphones located both inside and outside the flow. Comparison of the data is made with results of similar studies. The results are also compared with theoretical predictions of the source strength for jet noise in the presence of flow and of the effects of sound propagation through a shear layer.

Sound Source Identification Through Flow Density Measurement and Correlation With Far Field Noise

NASA Technical Reports Server (NTRS)

Panda, J.; Seasholtz, R. G.

2001-01-01

Sound sources in the plumes of unheated round jets, in the Mach number range 0.6 to 1.8, were investigated experimentally using "casuality" approach, where air density fluctuations in the plumes were correlated with the far field noise. The air density was measured using a newly developed Molecular Rayleigh scattering based technique, which did not require any seeding. The reference at the end provides a detailed description of the measurement technique.

Thermal changes of the environment and their influence on reinforced concrete structures

NASA Astrophysics Data System (ADS)

Fojtik, R.; Cajka, R.

2018-04-01

The thermal expansion of concrete elements concerns both monolithic and prefabricated structures. Inappropriate design of dilation segments may cause minor but even larger failures. Critical environment factors are temperature-changing operations, such as unheated underground garages, where temperature fluctuations may occur depending on the exterior conditions. This paper numerically and experimentally analyses the thermal deformation of selected girders in the underground garages and the consequent structure failures, their causes, possible prevention and appropriate remediation.

Experimental investigation into the interaction between the human body and room airflow and its effect on thermal comfort under stratum ventilation.

PubMed

Cheng, Y; Lin, Z

2016-04-01

Room occupants' comfort and health are affected by the airflow. Nevertheless, they themselves also play an important role in indoor air distribution. This study investigated the interaction between the human body and room airflow under stratum ventilation. Simplified thermal manikin was employed to effectively resemble the human body as a flow obstacle and/or free convective heat source. Unheated and heated manikins were designed to fully evaluate the impact of the manikin at various airflow rates. Additionally, subjective human tests were conducted to evaluate thermal comfort for the occupants in two rows. The findings show that the manikin formed a local blockage effect, but the supply airflow could flow over it. With the body heat from the manikin, the air jet penetrated farther compared with that for the unheated manikin. The temperature downstream of the manikin was also higher because of the convective effect. Elevating the supply airflow rate from 7 to 15 air changes per hour varied the downstream airflow pattern dramatically, from an uprising flow induced by body heat to a jet-dominated flow. Subjective assessments indicated that stratum ventilation provided thermal comfort for the occupants in both rows. Therefore, stratum ventilation could be applied in rooms with occupants in multiple rows. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Ultra-fast escape maneuver of an octopus-inspired robot.

PubMed

Weymouth, G D; Subramaniam, V; Triantafyllou, M S

2015-02-02

We design and test an octopus-inspired flexible hull robot that demonstrates outstanding fast-starting performance. The robot is hyper-inflated with water, and then rapidly deflates to expel the fluid so as to power the escape maneuver. Using this robot we verify for the first time in laboratory testing that rapid size-change can substantially reduce separation in bluff bodies traveling several body lengths, and recover fluid energy which can be employed to improve the propulsive performance. The robot is found to experience speeds over ten body lengths per second, exceeding that of a similarly propelled optimally streamlined rigid rocket. The peak net thrust force on the robot is more than 2.6 times that on an optimal rigid body performing the same maneuver, experimentally demonstrating large energy recovery and enabling acceleration greater than 14 body lengths per second squared. Finally, over 53% of the available energy is converted into payload kinetic energy, a performance that exceeds the estimated energy conversion efficiency of fast-starting fish. The Reynolds number based on final speed and robot length is [Formula: see text]. We use the experimental data to establish a fundamental deflation scaling parameter [Formula: see text] which characterizes the mechanisms of flow control via shape change. Based on this scaling parameter, we find that the fast-starting performance improves with increasing size.

Examining the relationship between free recall and immediate serial recall: the effects of list length and output order.

PubMed

Ward, Geoff; Tan, Lydia; Grenfell-Essam, Rachel

2010-09-01

In 4 experiments, participants were presented with lists of between 1 and 15 words for tests of immediate memory. For all tasks, participants tended to initiate recall with the first word on the list for short lists. As the list length was increased, so there was a decreased tendency to start with the first list item; and, when free to do so, participants showed an increased tendency to start with one of the last 4 list items. In all tasks, the start position strongly influenced the shape of the resultant serial position curves: When recall started at Serial Position 1, elevated recall of early list items was observed; when recall started toward the end of the list, there were extended recency effects. These results occurred under immediate free recall (IFR) and different variants of immediate serial recall (ISR) and reconstruction of order (RoO) tasks. We argue that these findings have implications for the relationship between IFR and ISR and between rehearsal and recall. (c) 2010 APA, all rights reserved).

Laser-Induced Thermal Acoustics Theory and Expected Experimental Errors when Applied to a Scramjet Isolator Model

NASA Technical Reports Server (NTRS)

Middleton, Troy F.; Balla, Robert Jeffrey; Baurle, Robert A.; Wilson, Lloyd G.

2011-01-01

A scramjet isolator model test apparatus is being assembled in the Isolator Dynamics Research Lab (IDRL) at the NASA Langley Research Center in Hampton, Virginia. The test apparatus is designed to support multiple measurement techniques for investigating the flow field in a scramjet isolator model. The test section is 1-inch high by 2-inch wide by 24-inch long and simulates a scramjet isolator with an aspect ratio of two. Unheated, dry air at a constant stagnation pressure and temperature is delivered to the isolator test section through a Mach 2.5 planar nozzle. The isolator test section is mechanically back-pressured to contain the resulting shock train within the 24-inch isolator length and supports temperature, static pressure, and high frequency pressure measurements at the wall. Additionally, nonintrusive methods including laser-induced thermal acoustics (LITA), spontaneous Raman scattering, particle image velocimetry, and schlieren imaging are being incorporated to measure off-wall fluid dynamic, thermodynamic, and transport properties of the flow field. Interchangeable glass and metallic sidewalls and optical access appendages permit making multiple measurements simultaneously. The measurements will be used to calibrate computational fluid dynamics turbulence models and characterize the back-pressured flow of a scramjet isolator. This paper describes the test apparatus, including the optical access appendages; the physics of the LITA method; and estimates of LITA measurement uncertainty for measurements of the speed of sound and temperature.

Feel the Burn, Part II: Quantifying and mapping spectral, spatial, and temporal structures of the transition region under hot and cold coronal regions

NASA Astrophysics Data System (ADS)

Atwood, Shane; Kankelborg, Charles C.

2017-08-01

The coronal volume is filled with magnetic field, yet only part of that volume has sufficient volume to exhibit hot X-ray loops. Using XRT and AIA images, we identify footpoints of hot coronal loops. We then use IRIS rasters to compare the spatial, temporal, and spectral structure of these relatively "heated" and "unheated" regions. We seek a signature of upward-propagating energy that could be associated with hot active region loops.

Radiatively Driven Hypersonic Wind Tunnel (RDHWT) Program Magnetohydrodynamic Accelerator Research Into Advanced Hypersonics (MARIAH II)

DTIC Science & Technology

2000-01-08

room temperature and 400 K. The major reason for increasing the plenum temperature was to avoid condensation in the unheated flow. Follow-on e...developed laminar flow in a pipe, an experimentally suggested form for the Nusselt Number is (Ref. 11): 3 1 PrRe µ µ861...Compression of Condensed Matter Conference, Colorado Springs, Colorado, June 28–July 2, 1993, AIP Press, NY, 1994, pp 1581–1584. 8. Baba, K. and Ochi, M

Trans-generational maternal effect: temperature influences egg size of the offspring in Atlantic salmon Salmo salar.

PubMed

Jonsson, B; Jonsson, N

2016-08-01

Effect of increased temperature during egg maturation on the mass of single eggs produced by the offspring was investigated experimentally in Atlantic salmon Salmo salar. Mass of eggs produced by next-generation females was larger when their mothers experienced warmer water during the last two months of egg maturation, relative to those that experienced unheated river water. There was no similar trans-generational paternal effect on offspring egg mass. © 2016 The Fisheries Society of the British Isles.

Application of the solubility parameter concept to the design of chemiresistor arrays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, R.C.; Yelton, W.G.; Ricco, A.J.

1998-04-01

Arrays of unheated chemically sensitive resistors (chemiresistors) can serve as extremely small, low power consumption sensors with simple read out electronics. Most work has focused on the exotic polymeric organic metals, but here the authors report new results on carbon loaded polymer composites, as well as polymeric ionic conductors. They use the solubility parameter concept to understand and categorize the chemiresistor responses and, in particular, they compare chemiresistors fabricated from polyisobutylene (PIB) to results from PIB coated acoustic wave sensors.

Glove and mitten protection in extreme cold weather: an Antarctic study.

PubMed

Iserson, Kenneth V

2016-01-01

Background Myths, misconceptions and a general lack of information surround the use of gloves and mittens in extreme cold environments. Objective This study assessed how well an assortment of gloves and mittens performed in a very cold environment. Methods A convenience sample of gloves and mittens were tested in Antarctica during the winter of 2016 using a calibrated thermometer (range: -148°F to +158°F/-100°C to +70°C) three times over a 0.5-mile distance (~20 minutes). A small sensor on a 10-foot-long cable was taped to the radial surface of the distal small finger on the non-dominant hand. The tested clothing was donned over the probe, the maximum temperature inside the glove/mitten was established near a building exit (ambient temperature approximately 54°F/12°C), and the building was exited, initiating the test. The hand was kept immobile during the test. Some non-heated gloves were tested with chemical heat warmers placed over the volar or dorsal wrist. Results The highest starting (96°F/36°C) and ending (82°F/28°C) temperatures were with electrically heated gloves. The lowest starting temperature was with electrically heated gloves with the power off (63°F/17°C). Non-heated gloves with an inserted chemical hand warmer had the lowest minimum temperature (33°F/1°C). Maximum temperatures for gloves/mittens did not correlate well with their minimum temperature. Conclusions Coverings that maintained finger temperatures within a comfortable and safe range (at or above 59°F/15°C) included the heated gloves and mittens (including some with the power off) and mittens with liners. Mittens without liners (shell) generally performed better than unheated gloves. Better results generally paralleled the item's cost. Inserting chemical heat warmers at the wrist increased heat loss, possibly through the exposed area around the warmer.

Glove and mitten protection in extreme cold weather: an Antarctic study.

PubMed

Iserson, Kenneth V

2016-01-01

Myths, misconceptions and a general lack of information surround the use of gloves and mittens in extreme cold environments. This study assessed how well an assortment of gloves and mittens performed in a very cold environment. A convenience sample of gloves and mittens were tested in Antarctica during the winter of 2016 using a calibrated thermometer (range: -148°F to +158°F/-100°C to +70°C) three times over a 0.5-mile distance (~20 minutes). A small sensor on a 10-foot-long cable was taped to the radial surface of the distal small finger on the non-dominant hand. The tested clothing was donned over the probe, the maximum temperature inside the glove/mitten was established near a building exit (ambient temperature approximately 54°F/12°C), and the building was exited, initiating the test. The hand was kept immobile during the test. Some non-heated gloves were tested with chemical heat warmers placed over the volar or dorsal wrist. The highest starting (96°F/36°C) and ending (82°F/28°C) temperatures were with electrically heated gloves. The lowest starting temperature was with electrically heated gloves with the power off (63°F/17°C). Non-heated gloves with an inserted chemical hand warmer had the lowest minimum temperature (33°F/1°C). Maximum temperatures for gloves/mittens did not correlate well with their minimum temperature. Coverings that maintained finger temperatures within a comfortable and safe range (at or above 59°F/15°C) included the heated gloves and mittens (including some with the power off) and mittens with liners. Mittens without liners (shell) generally performed better than unheated gloves. Better results generally paralleled the item's cost. Inserting chemical heat warmers at the wrist increased heat loss, possibly through the exposed area around the warmer.

An Enumerative Combinatorics Model for Fragmentation Patterns in RNA Sequencing Provides Insights into Nonuniformity of the Expected Fragment Starting-Point and Coverage Profile.

PubMed

Prakash, Celine; Haeseler, Arndt Von

2017-03-01

RNA sequencing (RNA-seq) has emerged as the method of choice for measuring the expression of RNAs in a given cell population. In most RNA-seq technologies, sequencing the full length of RNA molecules requires fragmentation into smaller pieces. Unfortunately, the issue of nonuniform sequencing coverage across a genomic feature has been a concern in RNA-seq and is attributed to biases for certain fragments in RNA-seq library preparation and sequencing. To investigate the expected coverage obtained from fragmentation, we develop a simple fragmentation model that is independent of bias from the experimental method and is not specific to the transcript sequence. Essentially, we enumerate all configurations for maximal placement of a given fragment length, F, on transcript length, T, to represent every possible fragmentation pattern, from which we compute the expected coverage profile across a transcript. We extend this model to incorporate general empirical attributes such as read length, fragment length distribution, and number of molecules of the transcript. We further introduce the fragment starting-point, fragment coverage, and read coverage profiles. We find that the expected profiles are not uniform and that factors such as fragment length to transcript length ratio, read length to fragment length ratio, fragment length distribution, and number of molecules influence the variability of coverage across a transcript. Finally, we explore a potential application of the model where, with simulations, we show that it is possible to correctly estimate the transcript copy number for any transcript in the RNA-seq experiment.

An Enumerative Combinatorics Model for Fragmentation Patterns in RNA Sequencing Provides Insights into Nonuniformity of the Expected Fragment Starting-Point and Coverage Profile

PubMed Central

Haeseler, Arndt Von

2017-01-01

Abstract RNA sequencing (RNA-seq) has emerged as the method of choice for measuring the expression of RNAs in a given cell population. In most RNA-seq technologies, sequencing the full length of RNA molecules requires fragmentation into smaller pieces. Unfortunately, the issue of nonuniform sequencing coverage across a genomic feature has been a concern in RNA-seq and is attributed to biases for certain fragments in RNA-seq library preparation and sequencing. To investigate the expected coverage obtained from fragmentation, we develop a simple fragmentation model that is independent of bias from the experimental method and is not specific to the transcript sequence. Essentially, we enumerate all configurations for maximal placement of a given fragment length, F, on transcript length, T, to represent every possible fragmentation pattern, from which we compute the expected coverage profile across a transcript. We extend this model to incorporate general empirical attributes such as read length, fragment length distribution, and number of molecules of the transcript. We further introduce the fragment starting-point, fragment coverage, and read coverage profiles. We find that the expected profiles are not uniform and that factors such as fragment length to transcript length ratio, read length to fragment length ratio, fragment length distribution, and number of molecules influence the variability of coverage across a transcript. Finally, we explore a potential application of the model where, with simulations, we show that it is possible to correctly estimate the transcript copy number for any transcript in the RNA-seq experiment. PMID:27661099

Changes in vegetation phenology on the Mongolian Plateau and their climatic determinants.

PubMed

Miao, Lijuan; Müller, Daniel; Cui, Xuefeng; Ma, Meihong

2017-01-01

Climate change affects the timing of phenological events, such as the start, end, and length of the growing season of vegetation. A better understanding of how the phenology responded to climatic determinants is important in order to better anticipate future climate-ecosystem interactions. We examined the changes of three phenological events for the Mongolian Plateau and their climatic determinants. To do so, we derived three phenological metrics from remotely sensed vegetation indices and associated these with climate data for the period of 1982 to 2011. The results suggested that the start of the growing season advanced by 0.10 days yr-1, the end was delayed by 0.11 days yr-1, and the length of the growing season expanded by 6.3 days during the period from 1982 to 2011. The delayed end and extended length of the growing season were observed consistently in grassland, forest, and shrubland, while the earlier start was only observed in grassland. Partial correlation analysis between the phenological events and the climate variables revealed that higher temperature was associated with an earlier start of the growing season, and both temperature and precipitation contributed to the later ending. Overall, our findings suggest that climate change will substantially alter the vegetation phenology in the grasslands of the Mongolian Plateau, and likely also in biomes with similar environmental conditions, such as other semi-arid steppe regions.

Modifications of hepatic drug metabolizing enzyme activities in rats fed baobab seed oil containing cyclopropenoid fatty acids.

PubMed

Andrianaivo-Rafehivola, A A; Siess, M H; Gaydou, E M

1995-05-01

The effects on drug metabolizing enzymes of cyclopropenoid fatty acids present in baobab seed oil were evaluated in rats fed either a diet with baobab seed oil (1.27% cyclopropenoid fatty acids in the diet) or a diet with heated baobab seed oil (0.046% cyclopropenoid fatty acids in the diet). Comparison was made with rats fed a mixture of oils that contained no cyclopropenoid fatty acid. Rats fed baobab oil showed retarded growth. In comparison with the other groups, the relative liver weights were markedly increased whereas cytochrome P-450 content and NADPH cytochrome c reductase and NADH cytochrome c reductase activities were decreased. In rats fed the heated baobab oil the relative liver weight was decreased and the cytochrome P-450 level and reductase activities were increased relative to levels in rats fed the unheated oil. Ethoxycoumarin deethylase, ethoxyresorufin deethylase and pentoxyresorufin depentylase activities, expressed on the basis of cytochrome P-450, were greater in the group fed unheated baobab seed oil. Cytosolic glutathione transferase activity was markedly decreased in rats fed fresh baobab seed oil and heating the oil, which reduced the content of cyclopropenoid fatty acids, led to a considerable increase of this activity. UDP-glucuronyl transferase activities were not modified by the type of oil included in the diet. It is possible that the mechanisms of action of cyclopropenoid fatty acids are related to alterations of membrane lipid composition or microsomal proteins.

Evaluation of cytotoxic and mutagenic effects of Coriolus versicolor and Funalia trogii extracts on mammalian cells.

PubMed

Unyayar, Ali; Demirbilek, Murat; Turkoglu, Melisa; Celik, Ayla; Mazmanci, Mehmet A; Erkurt, Emrah A; Unyayar, Serpil; Cekic, Ozlem; Atacag, Hatice

2006-01-01

This study examined the in vitro cytotoxic activities of standardized aqueous bioactive extracts prepared from Coriolus versicolor and Funalia trogiiATCC 200800 on HeLa and fibroblast cell lines using a MTT (3-[4,5-dimetiltiazol-2-]-2-5-difeniltetrazolium bromide) cytotoxicity assay. F. trogii and C. versicolor extracts were cytotoxic to both cell lines. At 10 microL treatment level, F. trogii and C. versicolor extracts inhibited proliferation of HeLa cancer cells by 71.5% and 45%, respectively, compared with controls. Toxicity was lower toward normal fibroblasts. In the latter case, treatment at 10 microL level with F. trogii and C. versicolor extracts reduced cell proliferation by 51.3% and 38.7%, respectively. In separate experiments, the mitotic index (MI) obtained with 3 microL treatment level of unheated extracts of the two fungi was comparable to the MI value obtained by treatment with 4 microg/mL MMC (anticancer agent mitomycin-C). A significant induction of sister chromatid exchange (SCE) was observed in normal cultured lymphocytes treated with MMC (4 microg/mL). MMC treatment reduced replication index compared with treatment with unheated F. trogii extract and negative controls (p < 0.001). In contrast to MMC, F. trogii extracts did not affect the proliferation of human lymphocytes compared with controls (p > 0.05). Laccase and peroxidase enzyme activities in F. trogii extract were implicated in their inhibitory effect on cancer cells. F. trogii extract was concluded to have antitumor activity.

Vitamin Content of Breast Milk From HIV-1–Infected Mothers Before and After Flash-Heat Treatment

PubMed Central

Israel-Ballard, Kiersten A.; Abrams, Barbara F.; Coutsoudis, Anna; Sibeko, Lindiwe N.; Cheryk, Lynn A.; Chantry, Caroline J.

2010-01-01

Background World Health Organization advocates heat treatment of expressed breastmilk (EBM) as one method to reduce postnatal transmission of human immunodeficiency virus (HIV) in developing countries. Flash-heat is a simple heat treatment method shown to inactivate cell-free HIV. Objective To determine the effect of flash-heat on vitamin content of milk. Methods Fresh EBM was collected from 50 HIV+ mothers in Durban, South Africa. Mothers washed their hands and then manually expressed 75–150 mL EBM into sterile jars. Milk was aliquoted to unheated controls or flash-heat (50 mL EBM in a glass jar heated in a 450-mL water jacket in an aluminum pan until water boiled, then EBM removed) simulating field conditions with an open flame. Samples were stored at −70°C and then analyzed for the effect of flash-heat on vitamins [A, ascorbic acid, riboflavin (B2), pyridoxal-5-phosphate (B6), folate, and B12]. Results Vitamin A was not significantly affected by flash-heat and vitamins B12 and C and folate increased significantly. Vitamins B2 and B6 were decreased to 59% (95% confidence interval 44 to 81) and 96% (95% confidence interval 92 to 99), respectively, of that found in unheated milk. Conclusions The percentage remaining after flash-heat suggests that most vitamin concentrations are retained after heating. Flash-heat may be a practical and nutritious infant feeding method for mothers in developing countries. PMID:18614920

Biomass production in experimental grasslands of different species richness during three years of climate warming

NASA Astrophysics Data System (ADS)

de Boeck, H. J.; Lemmens, C. M. H. M.; Gielen, B.; Malchair, S.; Carnol, M.; Merckx, R.; van den Berge, J.; Ceulemans, R.; Nijs, I.

2007-12-01

Here we report on the single and combined impacts of climate warming and species richness on the biomass production in experimental grassland communities. Projections of a future warmer climate have stimulated studies on the response of terrestrial ecosystems to this global change. Experiments have likewise addressed the importance of species numbers for ecosystem functioning. There is, however, little knowledge on the interplay between warming and species richness. During three years, we grew experimental plant communities containing one, three or nine grassland species in 12 sunlit, climate-controlled chambers in Wilrijk, Belgium. Half of these chambers were exposed to ambient air temperatures (unheated), while the other half were warmed by 3°C (heated). Equal amounts of water were added to heated and unheated communities, so that warming would imply drier soils if evapotranspiration was higher. Biomass production was decreased due to warming, both aboveground (-29%) and belowground (-25%), as negative impacts of increased heat and drought stress in summer prevailed. Increased resource partitioning, likely mostly through spatial complementarity, led to higher shoot and root biomass in multi-species communities, regardless of the induced warming. Surprisingly, warming suppressed productivity the most in 9-species communities, which may be attributed to negative impacts of intense interspecific competition for resources under conditions of high abiotic stress. Our results suggest that warming and the associated soil drying could reduce primary production in many temperate grasslands, and that this will not necessarily be mitigated by efforts to maintain or increase species richness.

Vitamin content of breast milk from HIV-1-infected mothers before and after flash-heat treatment.

PubMed

Israel-Ballard, Kiersten A; Abrams, Barbara F; Coutsoudis, Anna; Sibeko, Lindiwe N; Cheryk, Lynn A; Chantry, Caroline J

2008-08-01

World Health Organization advocates heat treatment of expressed breastmilk (EBM) as one method to reduce postnatal transmission of human immunodeficiency virus (HIV) in developing countries. Flash-heat is a simple heat treatment method shown to inactivate cell-free HIV. To determine the effect of flash-heat on vitamin content of milk. Fresh EBM was collected from 50 HIV+ mothers in Durban, South Africa. Mothers washed their hands and then manually expressed 75-150 mL EBM into sterile jars. Milk was aliquoted to unheated controls or flash-heat (50 mL EBM in a glass jar heated in a 450-mL water jacket in an aluminum pan until water boiled, then EBM removed) simulating field conditions with an open flame. Samples were stored at -70 degrees C and then analyzed for the effect of flash-heat on vitamins [A, ascorbic acid, riboflavin (B2), pyridoxal-5-phosphate (B6), folate, and B12]. Vitamin A was not significantly affected by flash-heat and vitamins B12 and C and folate increased significantly. Vitamins B2 and B6 were decreased to 59% (95% confidence interval 44 to 81) and 96% (95% confidence interval 92 to 99), respectively, of that found in unheated milk. The percentage remaining after flash-heat suggests that most vitamin concentrations are retained after heating. Flash-heat may be a practical and nutritious infant feeding method for mothers in developing countries.

Novel odd/even effect of alkylene chain length on the photopolymerizability of organogelators.

PubMed

Aoki, Ken'ichi; Kudo, Masabumi; Tamaoki, Nobuyuki

2004-10-28

[reaction: see text] Starting from diactylene diacarboxylic acids, we have synthesized a series of photopolymerizable organogelators that possess simple amide structures, different alkylene chain lengths, and either optically active or racemic 3,7-dimethyl-1-octylamine units. The alkylene chain length of these compounds exhibits a prominent odd/even effect with respect to the photopolymerization in the gel state and is accompanied by a stereostructural effect on the gelation ability.

Length, Area, and Volume--or, Just Geometry Really

ERIC Educational Resources Information Center

Ball, Derek

2012-01-01

Many delegates at "conference" relish the opportunity, and the space, to "do some mathematics". Opportunity and space help to make the experience memorable, but how often is the quality of the starting point, or question acknowledged? Here is a set of starting points or problems that invite the reader to "do some mathematics". Deliberately, no…

Ontario appellate court overturns judgment for plaintiffs infected through tainted blood.

PubMed

Elliott, Richard

2002-03-01

On 29 November 2001, the Ontario Court of Appeal issued a lengthy decision overturning a lower-court judgment in favour of three hemophiliacs infected with HIV in 1985 through contaminated blood-factor concentrate. The joint decision in the three cases of Robb, Rintoul, and Farrow is the latest decision in litigation dating back to 1992. The plaintiffs alleged negligence by the Canadian Red Cross Society and the Canadian government for delays in introducing heat-treated concentrate after the risks posed by unheated product were known.

Prehospital fast track care for patients with hip fracture: Impact on time to surgery, hospital stay, post-operative complications and mortality a randomised, controlled trial.

PubMed

Larsson, Glenn; Strömberg, Rn Ulf; Rogmark, Cecilia; Nilsdotter, Anna

2016-04-01

Ambulance organisations in Sweden have introduced prehospital fast track care (PFTC) for patients with suspected hip fracture. This means that the ambulance nurse starts the pre-operative procedure otherwise implemented at the accident & emergency ward (A&E) and transports the patient directly to the radiology department instead of A&E. If the diagnosis is confirmed, the patient is transported directly to the orthopaedic ward. No previous randomised, controlled studies have analysed PFTC to describe its possible advantages. The aim of this study is to examine whether PFTC has any impact on outcomes such as time to surgery, length of stay, post-operative complications and mortality. The design of this study is a prehospital randomised, controlled study, powered to include 400 patients. The patients were randomised into PFTC or the traditional care pathway (A&E group). Time from arrival to start for X-ray was faster for PFTC (mean, 28 vs. 145 min; p<0.001), but the groups did not differ with regard to time from start of X-ray to start of surgery (mean 18.40 h in both groups). No significant differences between the groups were observed with regard to: time from arrival to start of surgery (p=0.07); proportion operated within 24h (79% PFTC, 75% A&E; p=0.34); length of stay (p=0.34); post-operative complications (p=0.75); and 4 month mortality (18% PFTC, 15% A&E p=0.58). PFTC improved time to X-ray and admission to a ward, as expected, but did not significantly affect time to start of surgery, length of stay, post-operative complications or mortality. These outcomes were probably affected by other factors at the hospital. Patients with either possible life-threatening conditions or life-threatening conditions prehospital were excluded. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of a high-performance boiling heat exchanger by improved liquid supply to narrow channels.

PubMed

Ohta, Haruhiko; Ohno, Toshiyuki; Hioki, Fumiaki; Shinmoto, Yasuhisa

2004-11-01

A two-phase flow loop is a promising method for application to thermal management systems for large-scale space platforms handling large amounts of energy. Boiling heat transfer reduces the size and weight of cold plates. The transportation of latent heat reduces the mass flow rate of working fluid and pump power. To develop compact heat exchangers for the removal of waste heat from electronic devices with high heat generation density, experiments on a method to increase the critical heat flux for a narrow heated channel between parallel heated and unheated plates were conducted. Fine grooves are machined on the heating surface in a transverse direction to the flow and liquid is supplied underneath flattened bubbles by the capillary pressure difference from auxiliary liquid channels separated by porous metal plates from the main heated channel. The critical heat flux values for the present heated channel structure are more than twice those for a flat surface at gap sizes 2 mm and 0.7 mm. The validity of the present structure with auxiliary liquid channels is confirmed by experiments in which the liquid supply to the grooves is interrupted. The increment in the critical heat flux compared to those for a flat surface takes a maximum value at a certain flow rate of liquid supply to the heated channel. The increment is expected to become larger when the length of the heated channel is increased and/or the gravity level is reduced.

Migration of the Willow Flycatcher along the Middle Rio Grande

Treesearch

Wang Yong; Deborah M. Finch

1997-01-01

We studied timing, abundance, subspecies composition, fat stores, stopover length, and habitat use of Willow Flycatchers (Empidonax traillii) during spring and fall stopover along the Middle Rio Grande, New Mexico. Spring migration started in mid-May and lasted about a month. Fall migration started in early-August and also lasted about a month. The most abundant...

Acceleration through a Holistic Support Model: An Implementation and Outcomes Analysis of FastStart@CCD

ERIC Educational Resources Information Center

Edgecombe, Nikki; Jaggars, Shanna Smith; Baker, Elaine DeLott; Bailey, Thomas

2013-01-01

Originally designed for students who test into at least two levels of developmental education in a particular subject area, FastStart is a compressed course program model launched in 2005 at the Community College of Denver (CCD). The program combines multiple semester-length courses into a single intensive semester, while providing case…

Length and time for development of laminar flow in tubes following a step increase of volume flux

NASA Astrophysics Data System (ADS)

Chaudhury, Rafeed A.; Herrmann, Marcus; Frakes, David H.; Adrian, Ronald J.

2015-01-01

Laminar flows starting up from rest in round tubes are relevant to numerous industrial and biomedical applications. The two most common types are flows driven by an abruptly imposed constant pressure gradient or by an abruptly imposed constant volume flux. Analytical solutions are available for transient, fully developed flows, wherein streamwise development over the entrance length is absent (Szymanski in J de Mathématiques Pures et Appliquées 11:67-107, 1932; Andersson and Tiseth in Chem Eng Commun 112(1):121-133, 1992, respectively). They represent the transient responses of flows in tubes that are very long compared with the entrance length, a condition that is seldom satisfied in biomedical tube networks. This study establishes the entrance (development) length and development time of starting laminar flow in a round tube of finite length driven by a piston pump that produces a step change from zero flow to a constant volume flux for Reynolds numbers between 500 and 3,000. The flows are examined experimentally, using stereographic particle image velocimetry and computationally using computational fluid dynamics, and are then compared with the known analytical solutions for fully developed flow conditions in infinitely long tubes. Results show that step function volume flux start-up flows reach steady state and fully developed flow five times more quickly than those driven by a step function pressure gradient, a 500 % change when compared with existing estimates. Based on these results, we present new, simple guidelines for achieving experimental flows that are fully developed in space and time in realistic (finite) tube geometries. To a first approximation, the time to achieve steady spatially developing flow is nearly equal to the time needed to achieve steady, fully developed flow. Conversely, the entrance length needed to achieve fully developed transient flow is approximately equal to the length needed to achieve fully developed steady flow. Beyond this level of description, the numerical results reveal interaction between the effects of space and time development and nonlinear Reynolds number effects.

Localised drug release using MRI-controlled focused ultrasound hyperthermia.

PubMed

Staruch, Robert; Chopra, Rajiv; Hynynen, Kullervo

2011-01-01

Thermosensitive liposomes provide a mechanism for triggering the local release of anticancer drugs, but this technology requires precise temperature control in targeted regions with minimal heating of surrounding tissue. The objective of this study was to evaluate the feasibility of using MRI-controlled focused ultrasound (FUS) and thermosensitive liposomes to achieve thermally mediated localised drug delivery in vivo. Results are reported from ten rabbits, where a FUS beam was scanned in a circular trajectory to heat 10-15 mm diameter regions in normal thigh to 43°C for 20-30 min. MRI thermometry was used for closed-loop feedback control to achieve temporally and spatially uniform heating. Lyso-thermosensitive liposomal doxorubicin was infused intravenously during hyperthermia. Unabsorbed liposomes were flushed from the vasculature by saline perfusion 2 h later, and tissue samples were harvested from heated and unheated thigh regions. The fluorescence intensity of the homogenised samples was used to calculate the concentration of doxorubicin in tissue. Closed-loop control of FUS heating using MRI thermometry achieved temperature distributions with mean, T90 and T10 of 42.9°C, 41.0°C and 44.8°C, respectively, over a period of 20 min. Doxorubicin concentrations were significantly higher in tissues sampled from heated than unheated regions of normal thigh muscle (8.3 versus 0.5 ng/mg, mean per-animal difference = 7.8 ng/mg, P < 0.05, Wilcoxon matched pairs signed rank test). The results show the potential of MRI-controlled focused ultrasound hyperthermia for enhanced local drug delivery with temperature-sensitive drug carriers.

Release of sulfur- and oxygen-bound components from a sulfur-rich kerogen during simulated maturation by hydrous pyrolysis

USGS Publications Warehouse

Putschew, A.; Schaeffer-Reiss, C.; Schaeffer, P.; Koopmans, M.P.; De Leeuw, J. W.; Lewan, M.D.; Sinninghe, Damste J.S.; Maxwell, J.R.

1998-01-01

An immature sulfur-rich marl from the Gessosso-solfifera Formation of the Vena del Gesso Basin (Messinian, Italy) has been subjected to hydrous pyrolysis (160 to 330??C) to simulate maturation under natural conditions. The kerogen of the unheated and heated samples was isolated and the hydrocarbons released by selective chemical degradation (Li/EtNH2 and HI/LiAIH4) were analysed to allow a study of the fate of sulfur- and oxygen-bound species with increasing temperature. The residues from the chemical treatments were also subjected to pyrolysis-GC to follow structural changes in the kerogens. In general, with increasing hydrous pyrolysis temperature, the amounts of sulfide- and ether-bound components in the kerogen decreased significantly. At the temperature at which the generation of expelled oil began (260??C), almost all of the bound components initially present in the unheated sample were released from the kerogen. Comparison with an earlier study of the extractable organic matter using a similar approach and the same samples provides molecular evidence that, with increasing maturation, solvent-soluble macromolecular material was initially released from the kerogen, notably as a result of thermal cleavage of weak Carbon-heteroatom bonds (sulfide, ester, ether) even at temperatures as low as 220??C. This solvent-soluble macromolecular material then underwent thermal cleavage to generate hydrocarbons at higher temperatures. This early generation of bitumen may explain the presence of unusually high amounts of extractable organic matter of macromolecular nature in very immature S-rich sediments.

Pathogenic amoebae in power-plant cooling lakes. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tyndall, R.L.; Willaert, E.; Stevens, A.R.

1981-06-01

Cooling waters and associated algae and sediments from four northern and four southern/western electric power plants were tested for the presence of pathogenic amoebae. Unheated control waters and algae/sediments from four northern and five southern/western sites were also tested. When comparing results from the test versus control sites, a significantly higher proportion (P less than or equal to 0.05) of the samples from the test sites were positive for thermophilic amoeba, thermophilic Naegleria and pathogenic Naegleria. The difference in number of samples positive for thermophilic Naegleria between heated and unheated waters, however, was attributable predominantly to the northern waters andmore » algae/sediments. While two of four northern test sites yielded pathogenic Naegleria, seven of the eight isolates were obtained from one site. Seasonality effects relative to the isolation of the pathogen were also noted at this site. One pathogen was isolated from a southwestern test site. Pathogens were not isolated from any control sites. Some of the pathogenic isolates were analyzed serologically and classified as pathogenic Naegleria fowleri. Salinity, pH, conductivity, and bacteriological profiles did not obviously correlate with the presence or absence of pathogenic Naegleria. While thermal addition was significantly associated with the presence of thermophilic Naegleria (P less than or equal to 0.05), the data implicate other as yet undefined parameters associated with the presence of the pathogenic thermophile. Until further delineation of these parameters is effected, generalizations cannot be made concerning the effect of thermal impact on the growth of pathogenic amoeba in a particular cooling system.« less

Proper Heat Shock Pretreatment Reduces Acute Liver Injury Induced by Carbon Tetrachloride and Accelerates Liver Repair in Mice

PubMed Central

Li, San-Qiang; Wang, Dong-Mei; Shu, You-Ju; Wan, Xue-Dong; Xu, Zheng-Shun; Li, En-Zhong

2013-01-01

Whether proper heat shock preconditioning can reduce liver injury and accelerate liver repair after acute liver injury is worth study. So mice received heat shock preconditioning at 40°C for 10 minutes (min), 20 min or 30 min and recovered at room temperature for 8 hours (h) under normal feeding conditions. Then acute liver injury was induced in the heat shock-pretreated mice and unheated control mice by intraperitoneal (i.p.) injection of carbon tetrachloride (CCl4). Hematoxylin and eosin (H&E) staining, serum aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels and the expression levels of heat shock protein 70 (HSP70), cytochrome P450 1A2 (CYP1A2) and proliferating cell nuclear antigen (PCNA) were detected in the unheated control mice and heat shock-pretreated mice after CCl4 administration. Our results showed that heat shock preconditioning at 40°C for 20 min remarkably improved the mice’s survival rate (P<0.05), lowered the levels of serum AST and ALT (P<0.05), induced HSP70 (P<0.01), CYP1A2 (P<0.01) and PCNA (P<0.05) expression, effectively reduced liver injury (P<0.05) and accelerated the liver repair (P<0.05) compared with heat shock preconditioning at 40°C for 10 min or 30 min in the mice after acute liver injury induced by CCl4 when compared with the control mice. Our results may be helpful in further investigation of heat shock pretreatment as a potential clinical approach to target liver injury PMID:24526809

Biomass production in experimental grasslands of different species richness during three years of climate warming

NASA Astrophysics Data System (ADS)

de Boeck, H. J.; Lemmens, C. M. H. M.; Zavalloni, C.; Gielen, B.; Malchair, S.; Carnol, M.; Merckx, R.; van den Berge, J.; Ceulemans, R.; Nijs, I.

2008-04-01

Here we report on the single and combined impacts of climate warming and species richness on the biomass production in experimental grassland communities. Projections of a future warmer climate have stimulated studies on the response of terrestrial ecosystems to this global change. Experiments have likewise addressed the importance of species numbers for ecosystem functioning. There is, however, little knowledge on the interplay between warming and species richness. During three years, we grew experimental plant communities containing one, three or nine grassland species in 12 sunlit, climate-controlled chambers in Wilrijk, Belgium. Half of these chambers were exposed to ambient air temperatures (unheated), while the other half were warmed by 3°C (heated). Equal amounts of water were added to heated and unheated communities, so that warming would imply drier soils if evapotranspiration was higher. Biomass production was decreased due to warming, both aboveground (-29%) and belowground (-25%), as negative impacts of increased heat and drought stress in summer prevailed. Complementarity effects, likely mostly through both increased aboveground spatial complementarity and facilitative effects of legumes, led to higher shoot and root biomass in multi-species communities, regardless of the induced warming. Surprisingly, warming suppressed productivity the most in 9-species communities, which may be attributed to negative impacts of intense interspecific competition for resources under conditions of high abiotic stress. Our results suggest that warming and the associated soil drying could reduce primary production in many temperate grasslands, and that this will not necessarily be mitigated by efforts to maintain or increase species richness.

Application of pyrolysis-gas chromatography/mass spectrometry to study changes in the organic matter of macro- and microaggregates of a Mediterranean soil upon heating.

PubMed

Campo, J; Nierop, K G J; Cammeraat, E; Andreu, V; Rubio, J L

2011-07-29

The heating effect on the soil organic matter (SOM) of a Mediterranean soil was studied in two fractions (macro- and microaggregates) and in two environments (soil under canopy of Quercus coccifera and bare soil between plants). Samples were heated under laboratory conditions at different temperatures (220, 380 and 500°C) to establish their effects on the SOM quality and quantity by comparison with unheated control samples (25°C). The SOM content in the soil under canopy was higher than in the bare one and in the microaggregate fractions than in the macroaggregate ones. Increasing temperatures caused, in general, the decrease of SOM content in both soils as well as in both aggregate classes. The quality of SOM was determined after extraction with 0.1 M NaOH and analysed by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Obtained pyrolysates were characterized by the presence of polyphenols and other aromatic pyrolysis products (lipids, polysaccharides, proteins and lignin derivatives). Some of the products in these control samples, and furthermore the presence of black carbon (BC) markers (e.g. benzene, pyridine and toluene), confirmed the occurrence of past wildfires in the study zone. The composition of the SOM extracted from the soils heated at 220°C, was quite similar to that obtained from unheated soils. The products derived from polysaccharides and lignin, and some coming from polyphenols, were not detected in the pyrolysates of the soil heated at 380 and 500°C. Copyright © 2011 Elsevier B.V. All rights reserved.

Exploiting Universality in Atoms with Large Scattering Lengths

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braaten, Eric

2012-05-31

The focus of this research project was atoms with scattering lengths that are large compared to the range of their interactions and which therefore exhibit universal behavior at sufficiently low energies. Recent dramatic advances in cooling atoms and in manipulating their scattering lengths have made this phenomenon of practical importance for controlling ultracold atoms and molecules. This research project was aimed at developing a systematically improvable method for calculating few-body observables for atoms with large scattering lengths starting from the universal results as a first approximation. Significant progress towards this goal was made during the five years of the project.

A Replication and Extension Study on N-Length, Inhibition and Cooperative Behavior with a Mexican-American Population. Part of the Final Report on Head Start Evaluation and Research: 1968-69 to the Office of Economic Opportunity.

ERIC Educational Resources Information Center

Manning, Brad A.; And Others

A study of cooperative behavior (social learning) and N-lengths using Negro subjects was replicated and extended. Subjects were 100 Mexican-American children, 4 1/2 to 6 years old. N-length was defined as the number of nonreinforced trials spaced between reinforced trials and intertrial reinforcement (ITR), introduced between regularly scheduled…

Numerical Simulation of Turbulent Combustion Using Vortex Methods

DTIC Science & Technology

1988-09-27

laminar burning velocity times the flame length measured along the line of maximum reaction rate. Following the burning of the eddy core, the strain...is approximately the same as the flame length at t - 0. In the second stage, and as the eddy starts to roll up, the flame front forms a fold within the...Rp, which is the slope of the curve in Fig. 9, can be approximated by the product of the flame length times the average burning velocity along the

Probabilistic Description of Fatigue Crack Growth Under Constant-and Variable-Amplitude Loading

DTIC Science & Technology

1989-03-01

plane, see figure 14. The length of the defected crack component and its angle, b and q, respectively, in Figure 15 were found to depend on the crack...length at which the defection occurs; as the crack length increases, b increases while q decreases. Due to the orientation of the deflected component...Breakpoint Voltage to Fun. Generator Output Setpoint Voltage Take Function Generator Gate High Start Test LNext page 153 Q! ~From last ag lastr DMAe 70

EMG and mechanical changes during sprint starts at different front block obliquities.

PubMed

Guissard, N; Duchateau, J; Hainaut, K

1992-11-01

The effect of decreased front block obliquity on start velocity was studied during sprint starts. The electromyographic (EMG) activity of the medial gastrocnemius (MG), the soleus (Sol), and the vastus medialis (VM) was recorded and analyzed at a 70 degrees, a 50 degrees, and a 30 degrees angle between the foot plate surface and the horizontal. Integrated EMGs (IEMG) were compared with muscle length changes in the MG and Sol in relation to foot and knee movements. The results indicate that decreasing front block obliquity significantly (P < 0.05) increases the start velocity without any change to the total duration of the pushing phase and the overall EMG activity. This improvement in sprint start performance is associated with the enhanced contribution of the MG during eccentric and concentric phases of calf muscles contraction. In the "set position" the initial length of MG and Sol is increased at 50 degrees and 30 degrees as compared with 70 degrees. The subsequent stretch-shortening cycle is improved and contributes more effectively to the speed of the muscle shortening. Moreover, lengthening these muscles during the eccentric phase stretches the muscle spindles, and the reflex activities that contribute to the observed increase in the MG IEMG, are present when the slope of the block is reduced. The results indicate that decreasing front block obliquity induces neural and mechanical modifications that contribute to increasing the sprint start velocity without any increase in the duration of the pushing phase.(ABSTRACT TRUNCATED AT 250 WORDS)

Monitoring start of season in Alaska with GLOBE, AVHRR, and MODIS data

NASA Astrophysics Data System (ADS)

Robin, Jessica; Dubayah, Ralph; Sparrow, Elena; Levine, Elissa

2008-03-01

This work evaluates whether continuity between Advanced Very High Resolution Radiometer (AVHRR) and Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index (NDVI) is achievable for monitoring phenological changes in Alaska. This work also evaluates whether NDVI can detect changes in start of the growing season (SOS) in this region. Six quadratic regression models with NDVI as a function of accumulated growing degree days (AGDD) were developed from 2001 through 2004 AVHRR and MODIS NDVI data sets for urban, mixed, and forested land covers. Model parameters determined NDVI values for start of the observational period as well as peak and length of the growing season. NDVI values for start of the growing season were determined from the model equations and field observations of SOS made by GLOBE students and researchers at University of Alaska Fairbanks. AGDD was computed from daily air temperature. AVHRR and MODIS models were significantly different from one another with differences in the start of the observational season as well as start, peak, and length of the growing season. Furthermore, AGDD for SOS was significantly lower during the 1990s than the 1980s. NDVI values at SOS did not detect this change. There are limitations with using NDVI to monitor phenological changes in these regions because of snow, the large extent of conifers, and clouds, which restrict the composite period. In addition, differing processing and spectral characteristics restrict continuity between AVHRR and MODIS NDVI data sets.

Nucleotide Sequences and Comparison of Two Large Conjugative Plasmids from Different Campylobacter species

DTIC Science & Technology

2004-01-01

alleles have different predicted lengths, e.g. in pCC31, cpp46 starts with ATGATG whereas in pTet this gene starts with only one ATG; in ssb1 , cmgB7 and...homologues in plasmid pVT745 from Actinobacillus actinomycetemcomitans, and a single-stranded DNA-binding protein ssb1 that may coat the single-stranded

Name Writing Ability Not Length of Name Is Predictive of Future Academic Attainment

ERIC Educational Resources Information Center

Copping, Lee T.; Cramman, Helen; Gott, Sarah; Gray, Helen; Tymms, Peter

2016-01-01

Background: The Performance Indicators in Primary Schools On Entry Baseline assessment for pupils starting school includes an item which aims to assess how well a pupil writes his or her own name. There is some debate regarding the utility of this measure, on the grounds that name length may constitute bias. Purpose, method and design: The…

Minimum MD simulation length required to achieve reliable results in free energy perturbation calculations: case study of relative binding free energies of fructose-1,6-bisphosphatase inhibitors.

PubMed

Rathore, R S; Aparoy, P; Reddanna, P; Kondapi, A K; Reddy, M Rami

2011-07-30

In an attempt to establish the criteria for the length of simulation to achieve the desired convergence of free energy calculations, two studies were carried out on chosen complexes of FBPase-AMP mimics. Calculations were performed for varied length of simulations and for different starting configurations using both conventional- and QM/MM-FEP methods. The results demonstrate that for small perturbations, 1248 ps simulation time could be regarded a reasonable yardstick to achieve convergence of the results. As the simulation time is extended, the errors associated with free energy calculations also gradually tapers off. Moreover, when starting the simulation from different initial configurations of the systems, the results are not changed significantly, when performed for 1248 ps. This study carried on FBPase-AMP mimics corroborates well with our previous successful demonstration of requirement of simulation time for solvation studies, both by conventional and ab initio FEP. The establishment of aforementioned criteria of simulation length serves a useful benchmark in drug design efforts using FEP methodologies, to draw a meaningful and unequivocal conclusion. Copyright © 2011 Wiley Periodicals, Inc.

Feel the Burn: What accounts for spatial variations in coronal heating?

NASA Astrophysics Data System (ADS)

Atwood, Shane; Kankelborg, Charles C.

2016-05-01

The coronal volume is filled with magnetic field, yet only part of that volume has sufficient heating to exhibit hot x-ray loops. How does the Sun decide where the heat goes? Using XRT and AIA images and HMI magnetograms, we identify footpoints of hot coronal loops, and magnetically similar regions underlying relatively unheated corona. We then use IRIS rasters and sit-and-stare observations to compare the spatial, temporal, and spectral structure of these relatively ``heated’’ and ``unheated’’ regions. We seek a signature of upward propagating energy that could be associated with hot active region loops.

Occurrence of mutagens in canned foods.

PubMed

Krone, C A; Iwaoka, W T

1984-01-01

Mutagens are shown to be present in a variety of commercially heat-processed foods. Since these substances are not present in the unheated raw material, it appears that they are produced during processing. Canned salmon and beef broth showed the highest mutagenicity while other canned beef and fish products yielded lower but detectable levels. These findings are significant not only because of the large proportion of the food supply which is processed by canning, but also because the mutagens in these foods exhibit chemical behaviors and Salmonella strain specificity similar to mutagens in grilled foods which have been shown to be mammalian carcinogens.

Experimental Investigation of the Differences Between Reynolds-Averaged and Favre-Averaged Velocity in Supersonic Jets

NASA Technical Reports Server (NTRS)

Panda, J.; Seasholtz, R. G.

2005-01-01

Recent advancement in the molecular Rayleigh scattering based technique allowed for simultaneous measurement of velocity and density fluctuations with high sampling rates. The technique was used to investigate unheated high subsonic and supersonic fully expanded free jets in the Mach number range of 0.8 to 1.8. The difference between the Favre averaged and Reynolds averaged axial velocity and axial component of the turbulent kinetic energy is found to be small. Estimates based on the Morkovin's "Strong Reynolds Analogy" were found to provide lower values of turbulent density fluctuations than the measured data.

Acoustic tests of a 15.2 centimeter-diameter potential flow convergent nozzle

NASA Technical Reports Server (NTRS)

Karchmer, A. M.; Dorsch, R. G.; Friedman, R.

1974-01-01

An experimental investigation of the jet noise radiated to the far field from a 15.2-cm-diam potential flow convergent nozzle has been conducted. Tests were made with unheated airflow over a range of subsonic nozzle exhaust velocities from 62 to 310m/sec. Mean and turbulent velocity measurements in the flow field of the nozzle exhaust indicated no apparent flow anomalies. Acoustic measurements yielded data uncontaminated by internal and/or background noise to velocities as low as 152m/sec. Finally, no significantly different acoustic characteristics between the potential flow nozzle and simple convergent nozzles were found.

"Sunday-start" OC regimen popular but may pose risk.

PubMed

1991-03-01

There is a controversy over the effectiveness of the "Sunday-Start" oral contraceptive packaging. Some clinicians believe that the Sunday-start pills are dangerously ineffective because up to 6 days after menses can elapse before a new packet is started. This is particularly risky for women beginning orals, or switching from a combined pill to a new triphasic. These clinicians consider them merely a successful marketing strategy. Most physicians consider the Sunday-start pills more effective because of improved compliance. The reasons cited are that women are too confused to remember to start pill packets on odd days, and that they like having their menses occur on weekdays. Arguments on this side are studies showing that the length of the pill-free interval does not affect the efficacy of that cycle. There are not data to resolve this debate other than a report from Ortho Pharmaceuticals that women prefer Sunday-start 3:1.

Start-On-The-Part Transient Model for In-Situ Automated Tape Placement of Thermoplastic Composites

NASA Technical Reports Server (NTRS)

Costen, Robert c.; Marchello, Joseph M.

1997-01-01

Fabrication of a complex part by automated tape placement (ATP) can require starting up a new tape-end in the part interior, termed start-on-the-part. Careful thermal management of the starting transient is needed to achieve uniform crystallinity and inter-laminar weld strength - which is the objective of this modeling effort. The transient is modeled by a Fourier-Laplace transform solution of the time-dependent thermal transport equation in two spatial dimensions. The solution is subject to a quasi-steady approximation for the speed and length of the consolidation head. Sample calculations are done for the Langley ATP robot applying PEEK/carbon fiber composite and for two upgrades in robot performance. The head starts out almost at rest which meets an engineering requirement for accurate placement of the new tape-end. The head then rapidly accelerates until it reaches its steady state speed. This rapid acceleration, however, violates the quasi-steady approximation, so uniform weld strength and crystallinity during the starting transient are not actually achieved. The solution does give the elapsed time and distance from start-up to validity of the quasi-steady approximation - which quantifies the length of the non-uniform region. The elapsed time was always less than 0.1 s and the elapsed distance less than 1 cm. This quantification would allow the non-uniform region to be either trimmed away or compensated for in the design of a part. Such compensation would require experiments to measure the degree of non-uniformity, because the solution does not provide this information. The rapid acceleration suggests that the consolidation roller or belt be actively synchronized to avoid abrading the tape.

Load-Dependent Emission Factors and Chemical Characteristics of IVOCs from a Medium-Duty Diesel Engine.

PubMed

Cross, Eben S; Sappok, Alexander G; Wong, Victor W; Kroll, Jesse H

2015-11-17

A detailed understanding of the climate and air quality impacts of mobile-source emissions requires the characterization of intermediate-volatility organic compounds (IVOCs), relatively-low-vapor-pressure gas-phase species that may generate secondary organic aerosol with high yields. Due to challenges associated with IVOC detection and quantification, IVOC emissions remain poorly understood at present. Here, we describe measurements of the magnitude and composition of IVOC emissions from a medium-duty diesel engine. Measurements are made on an engine dynamometer and utilize a new mass-spectrometric instrument to characterize the load dependence of the emissions in near-real-time. Results from steady-state engine operation indicate that IVOC emissions are highly dependent on engine power, with highest emissions at engine idle and low-load operation (≤25% maximum rated power) with a chemical composition dominated by saturated hydrocarbon species. Results suggest that unburned fuel components are the dominant IVOCs emitted at low loads. As engine load increases, IVOC emissions decline rapidly and become increasingly characterized by unsaturated hydrocarbons and oxygenated organics, newly formed from incomplete combustion processes at elevated engine temperatures and pressures. Engine transients, including a cold-start ignition and engine acceleration, show IVOC emission profiles that are different in amount or composition compared to steady-state combustion, underscoring the utility of characterizing IVOC emissions with high time resolution across realistic engine operating conditions. We find possible evidence for IVOC losses on unheated dilution and sampling surfaces, which need to be carefully accounted for in IVOC emission studies.

Telomere dynamics in wild brown trout: effects of compensatory growth and early growth investment.

PubMed

Näslund, Joacim; Pauliny, Angela; Blomqvist, Donald; Johnsson, Jörgen I

2015-04-01

After a period of food deprivation, animals often respond with a period of faster than normal growth. Such responses have been suggested to result in decreased chromosomal maintenance, which in turn may affect the future fitness of an individual. Here, we present a field experiment in which a food deprivation period of 24 days was enforced on fish from a natural population of juvenile brown trout (Salmo trutta) at the start of the high-growth season in spring. The growth of the food-deprived fish and a non-deprived control group was then monitored in the wild during 1 year. Fin tissue samples were taken at the start of the experiment and 1 year after food deprivation to monitor the telomere dynamics, using reduced telomere length as an indicator of maintenance cost. The food-deprived fish showed partial compensatory growth in both mass and length relative to the control group. However, we found no treatment effects on telomere dynamics, suggesting that growth-compensating brown trout juveniles are able to maintain their telomeres during their second year in the stream. However, body size at the start of the experiment, reflecting growth rate during their first year of life, was negatively correlated with change in telomere length over the following year. This result raises the possibility that rapid growth early in life induces delayed costs in cellular maintenance.

Presbyopia

MedlinePlus

... of presbyopia when you start holding books and newspapers at arm's length to be able to read ... of Privacy Practices Notice of Nondiscrimination Manage Cookies Advertising Mayo Clinic is a not-for-profit organization ...

Family-specific Kinesin Structures Reveal Neck-linker Length Based on Initiation of the Coiled-coil*

PubMed Central

Phillips, Rebecca K.; Peter, Logan G.; Gilbert, Susan P.

2016-01-01

Kinesin-1, -2, -5, and -7 generate processive hand-over-hand 8-nm steps to transport intracellular cargoes toward the microtubule plus end. This processive motility requires gating mechanisms to coordinate the mechanochemical cycles of the two motor heads to sustain the processive run. A key structural element believed to regulate the degree of processivity is the neck-linker, a short peptide of 12–18 residues, which connects the motor domain to its coiled-coil stalk. Although a shorter neck-linker has been correlated with longer run lengths, the structural data to support this hypothesis have been lacking. To test this hypothesis, seven kinesin structures were determined by x-ray crystallography. Each included the neck-linker motif, followed by helix α7 that constitutes the start of the coiled-coil stalk. In the majority of the structures, the neck-linker length differed from predictions because helix α7, which initiates the coiled-coil, started earlier in the sequence than predicted. A further examination of structures in the Protein Data Bank reveals that there is a great disparity between the predicted and observed starting residues. This suggests that an accurate prediction of the start of a coiled-coil is currently difficult to achieve. These results are significant because they now exclude simple comparisons between members of the kinesin superfamily and add a further layer of complexity when interpreting the results of mutagenesis or protein fusion. They also re-emphasize the need to consider factors beyond the kinesin neck-linker motif when attempting to understand how inter-head communication is tuned to achieve the degree of processivity required for cellular function. PMID:27462072

Non-diffusive ignition of a gaseous reactive mixture following time-resolved, spatially distributed energy deposition

NASA Astrophysics Data System (ADS)

Kassoy, D. R.

2014-01-01

Systematic asymptotic methods are applied to the compressible conservation and state equations for a reactive gas, including transport terms, to develop a rational thermomechanical formulation for the ignition of a chemical reaction following time-resolved, spatially distributed thermal energy addition from an external source into a finite volume of gas. A multi-parameter asymptotic analysis is developed for a wide range of energy deposition levels relative to the initial internal energy in the volume when the heating timescale is short compared to the characteristic acoustic timescale of the volume. Below a quantitatively defined threshold for energy addition, a nearly constant volume heating process occurs, with a small but finite internal gas expansion Mach number. Very little added thermal energy is converted to kinetic energy. The gas expelled from the boundary of the hot, high-pressure spot is the source of mechanical disturbances (acoustic and shock waves) that propagate away into the neighbouring unheated gas. When the energy addition reaches the threshold value, the heating process is fully compressible with a substantial internal gas expansion Mach number, the source of blast waves propagating into the unheated environmental gas. This case corresponds to an extremely large non-dimensional hot-spot temperature and pressure. If the former is sufficiently large, a high activation energy chemical reaction is initiated on the short heating timescale. This phenomenon is in contrast to that for more modest levels of energy addition, where a thermal explosion occurs only after the familiar extended ignition delay period for a classical high activation reaction. Transport effects, modulated by an asymptotically small Knudsen number, are shown to be negligible unless a local gradient in temperature, concentration or velocity is exceptionally large.

Effects of experimental parameters on the sorption of cesium, strontium, and uranium from saline groundwaters onto shales: Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, R.E.; Arnold, W.D.; Case, F.I.

1988-11-01

This report concerns an extension of the first series of experiments on the sorption properties of shales and their clay mineral components reported earlier. Studies on the sorption of cesium and strontium were carried out on samples of Chattanooga (Upper Dowelltown), Pierre, Green River Formation, Nolichucky, and Pumpkin Valley Shales that had been heated to 120/degree/C in a 0.1-mol/L NaCl solution for periods up to several months and on samples of the same shales which had been heated to 250/degree/C in air for six months, to simulate limiting scenarios in a HLW repository. To investigate the kinetics of the sorptionmore » process in shale/groundwater systems, strontium sorption experiments were done on unheated Pierre, Green River Formation, Nolichucky, and Pumpkin Valley Shales in a diluted, saline groundwater and in 0.03-mol/L NaHCO/sub 3/, for periods of 0.25 to 28 days. Cesium sorption kinetics tests were performed on the same shales in a concentrated brine for the same time periods. The effect of the water/rock (W/R) ratio on sorption for the same combinations of unheated shales, nuclides, and groundwaters used in the kinetics experiments was investigated for a range of W/R ratios of 3 to 20 mL/g. Because of the complexity of the shale/groundwater interaction, a series of tests was conducted on the effects of contact time and W/R ratio on the pH of a 0.03-mol/L NaHCO/sub 3/ simulated groundwater in contact with shales. 8 refs., 12 figs., 15 tabs.« less

Pressure drop reduction and heat transfer deterioration of slush nitrogen in triangular and circular pipe flows

NASA Astrophysics Data System (ADS)

Ohira, Katsuhide; Kurose, Kizuku; Okuyama, Jun; Saito, Yutaro; Takahashi, Koichi

2017-01-01

Slush fluids such as slush hydrogen and slush nitrogen are characterized by superior properties as functional thermal fluids due to their density and heat of fusion. In addition to allowing efficient hydrogen transport and storage, slush hydrogen can serve as a refrigerant for high-temperature superconducting (HTS) equipment using MgB2, with the potential for synergistic effects. In this study, pressure drop reduction and heat transfer deterioration experiments were performed on slush nitrogen flowing in a horizontal triangular pipe with sides of 20 mm under the conditions of three different cross-sectional orientations. Experimental conditions consisted of flow velocity (0.3-4.2 m/s), solid fraction (0-25 wt.%), and heat flux (0, 10, and 20 kW/m2). Pressure drop reduction became apparent at flow velocities exceeding about 1.3-1.8 m/s, representing a maximum amount of reduction of 16-19% in comparison with liquid nitrogen, regardless of heating. Heat transfer deterioration was seen at flow velocities of over 1.2-1.8 m/s, for a maximum amount of deterioration of 13-16%. The authors of the current study compared the results for pressure drop reduction and heat transfer deterioration in triangular pipe with those obtained previously for circular and square pipes, clarifying differences in flow and heat transfer properties. Also, a correlation equation was obtained between the slush Reynolds number and the pipe friction factor, which is important in the estimation of pressure drop in unheated triangular pipe. Furthermore, a second correlation equation was derived between the modified slush Reynolds number and the pipe friction factor, enabling the integrated prediction of pressure drop in both unheated triangular and circular pipes.

Development of a heat-processing method for koji to enhance its antioxidant activity.

PubMed

Okutsu, Kayu; Yoshizaki, Yumiko; Takamine, Kazunori; Tamaki, Hisanori; Ito, Kiyoshi; Sameshima, Yoshihiro

2012-03-01

We developed a heat-processing method to enhance the antioxidant activity of koji. The superoxide anion scavenging activity (SOSA) and oxygen radical absorbance capacity (ORAC) of heat-processed koji (HP-koji) at 55 °C for 7 days were 4.9 times and 4.2 times, respectively, those of unheated koji. These results showed that heat processing effectively enhances the antioxidant activity of koji. Analysis of the antioxidant activities of koji subjected to a range of temperatures (45-75 °C) revealed that the SOSA is enhanced by heating at higher temperatures, which might be catalyzed by Maillard reaction, whereas the ORAC was enhanced by heating at lower temperatures, which might be catalyzed by an enzymatic reaction. Assuming these enhancements in antioxidant activities are contributed by both Maillard and enzyme reactions, we hypothesized that the antioxidant activity of HP-koji could be more effectively amplified by heating at a higher temperature after the progression of the enzymatic reaction at a moderate temperature. Therefore, we evaluated the effect of heating of koji in a stepwise manner, first at 55 °C for 2 days and then at 75 °C for 5days. The antioxidant activities of stepwise-heated HP-koji were higher than those of koji heated at either 55 °C or 75 °C. The SOSA and ORAC of stepwise-heated HP-koji were 94 times and 6 times, respectively, those of unheated koji. This result suggests that enzymatic reaction followed by Maillard reaction can effectively enhance the antioxidant activity of HP-koji. Thus, we developed a novel heat-processing method to enhance the antioxidant activity of koji. Copyright © 2011 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Protection from Muscle Damage in the Absence of Changes in Muscle Mechanical Behavior.

PubMed

Hoffman, Ben W; Cresswell, Andrew G; Carroll, Timothy J; Lichtwark, Glen A

2016-08-01

The repeated bout effect characterizes the protective adaptation after a single bout of unaccustomed eccentric exercise that induces muscle damage. Sarcomerogenesis and increased tendon compliance have been suggested as potential mechanisms for the repeated bout effect by preventing muscle fascicles from being stretched onto the descending limb of the length-tension curve (the region where sarcomere damage is thought to occur). In this study, evidence was sought for three possible mechanical changes that would support either the sarcomerogenesis or the increased tendon compliance hypotheses: a sustained rightward shift in the fascicle length-tension relationship, reduced fascicle strain amplitude, and reduced starting fascicle length. Subjects (n = 10) walked backward downhill (5 km·h, 20% incline) on a treadmill for 30 min on two occasions separated by 7 d. Kinematic data and medial gastrocnemius fascicle lengths (ultrasonography) were recorded at 10-min intervals to compare fascicle strains between bouts. Fascicle length-torque curves from supramaximal tibial nerve stimulation were constructed before, 2 h after, and 2 d after each exercise bout. Maximum torque decrement and elevated muscle soreness were present after the first, but not the second, backward downhill walking bout signifying a protective repeated bout effect. There was no sustained rightward shift in the length-torque relationship between exercise bouts, nor decreases in fascicle strain amplitude or shortening of the starting fascicle length. Protection from a repeated bout of eccentric exercise was conferred without changes in muscle fascicle strain behavior, indicating that sarcomerogenesis and increased tendon compliance were unlikely to be responsible. As fascicle strains are relatively small in humans, we suggest that changes to connective tissue structures, such as extracellular matrix remodeling, are better able to explain the repeated bout effect observed here.

Changes in root length during orthodontic treatment: advantages for immature teeth.

PubMed

Mavragani, Maria; Bøe, Olav Egil; Wisth, Per Johan; Selvig, Knut Andreas

2002-02-01

The purpose of the study was to investigate root lengthening during orthodontic treatment in relation to the age of the patient, the developmental stage of the root, and the anticipated growth. Specifically, the potential benefit of treating young teeth was addressed. The sample consisted of 80 patients with Angle Class II division 1 malocclusions, treated with extraction of at least two maxillary first premolars, and edgewise technique with 0.018-inch slot brackets. Additionally, a cross-sectional control group of 66 untreated individuals matched to gender, and pre- and post-treatment age of the experimental group was included. Crown and root lengths of the maxillary incisors were measured on peri-apical radiographs before and after treatment, and corrected for image distortion. The stage of root development before treatment was recorded. Root elongation during treatment was found for 50 out of the 280 examined teeth. Age at treatment start was significantly higher among the patients showing root shortening of the lateral incisors during treatment than among those showing root elongation (P < 0.05). The stage of root development was significantly related to the direction of root length change, i.e. shortening or elongation. Roots elongated during treatment did not differ in length from untreated teeth of similarly aged individuals. There was no significant difference in the extent of root lengthening between the roots elongated during treatment and the normal root lengthening in age-matched untreated individuals. Post-treatment root length was significantly related to pre-treatment age. Roots that were incompletely developed before treatment reached a significantly greater length than those that were fully developed at the start of treatment. The results of this study show a definite advantage for younger teeth with regard to post-treatment root length. This finding may influence treatment planning strategy.

The complete mitochondrial genome of the longhorn beetle Xylotrechus grayii (Coleoptera: Cerambycidae).

PubMed

Guo, Kun; Chen, Jun; Xu, Chang-Qing; Qiao, Hai-Li; Xu, Rong; Zhao, Xiang-Jian

2016-05-01

We sequenced the complete mitochondrial genome of the longhorn beetle, Xylotrechus grayii. The total length of the X. grayii mitogenome was 15,540 bp with an A + T content of 75.29%, consisting of 13 protein-coding genes (PCGs), 22 tRNA genes, 2 rRNA genes and an A + T-rich region. All the genes were arranged in the same order as that of the ancestral insect. All PCGs started with a typical ATN codon except for cox1 and nad1, which used TTG as start codon. Ten out of 13 PCGs terminated with incomplete codons (TA or T). The A + T-rich region was 893 bp in length with an A + T content of 85.89 %.

The constant threat from a non-native predator increases tail muscle and fast-start swimming performance in Xenopus tadpoles.

PubMed

Mori, Tsukasa; Yanagisawa, Yukio; Kitani, Yoichiro; Yamamoto, Goshi; Goto-Inoue, Naoko; Kimura, Tadashi; Kashiwagi, Keiko; Kashiwagi, Akihiko

2017-11-15

Predator-induced phenotypic plasticity is the ability of prey to adapt to their native predator. However, owing to environmental changes, encounters with unknown predators are inevitable. Therefore, study of prey and non-native predator interaction will reveal the primary stages of adaptive strategies in prey-predator interactions in the context of evolutionary processes. Here, Xenopus tadpoles exposed to a non-native predator, a larval salamander, showed a significant increase in body weight and tail length to body length ratio. The T max 2 test indicated a significant enhancement of the tail muscle and decrease in the relative ventral fin height in tadpoles exposed to predation risk, leading to significantly higher average swimming speeds. The analysis of muscle-related metabolites revealed that sarcosine increased significantly in tadpoles exposed to non-native predators. Multiple linear regression analysis of the fast-start swimming pattern showed that the fast-start swimming speed was determined by the time required for a tadpole to bend its body away from the threat (C-start) and the angle at which it was bent. In conclusion, morphological changes in tadpoles were functionally adaptive and induced by survival behaviors of Xenopus tadpoles against non-native predators. © 2017. Published by The Company of Biologists Ltd.

Optimal pricing and lot-sizing for perishable inventory with price and time dependent ramp-type demand

NASA Astrophysics Data System (ADS)

Panda, S.; Saha, S.; Basu, M.

2013-01-01

Product perishability is an important aspect of inventory control. To minimise the effect of deterioration, retailers in supermarkets, departmental store managers, etc. always want higher inventory depletion rate. In this article, we propose a dynamic pre- and post-deterioration cumulative discount policy to enhance inventory depletion rate resulting low volume of deterioration cost, holding cost and hence higher profit. It is assumed that demand is a price and time dependent ramp-type function and the product starts to deteriorate after certain amount of time. Unlike the conventional inventory models with pricing strategies, which are restricted to a fixed number of price changes and to a fixed cycle length, we allow the number of price changes before as well as after the start of deterioration and the replenishment cycle length to be the decision variables. Before start of deterioration, discounts on unit selling price are provided cumulatively in successive pricing cycles. After the start of deterioration, discounts on reduced unit selling price are also provided in a cumulative way. A mathematical model is developed and the existence of the optimal solution is verified. A numerical example is presented, which indicates that under the cumulative effect of price discounting, dynamic pricing policy outperforms static pricing strategy. Sensitivity analysis of the model is carried out.

Hydrological Controls on Floodplain Forest Phenology Assessed using Remotely Sensed Vegetation Indices

NASA Astrophysics Data System (ADS)

Lemon, M. G.; Keim, R.

2017-12-01

Although specific controls are not well understood, the phenology of temperate forests is generally thought to be controlled by photoperiod and temperature, although recent research suggests that soil moisture may also be important. The phenological controls of forested wetlands have not been thoroughly studied, and may be more controlled by site hydrology than other forests. For this study, remotely sensed vegetation indices were used to investigate hydrological controls on start-of-season timing, growing season length, and end-of-season timing at five floodplains in Louisiana, Arkansas, and Texas. A simple spring green-up model was used to determine the null spring start of season time for each site as a function of land surface temperature and photoperiod, or two remotely sensed indices: MODIS phenology data product and the MODIS Nadir Bidirectional Reflectance Distribution Function-Adjusted Reflectance (NBAR) product. Preliminary results indicate that topographically lower areas within the floodplain with higher flood frequency experience later start-of-season timing. In addition, start-of-season is delayed in wet years relative to predicted timing based solely on temperature and photoperiod. The consequences for these controls unclear, but results suggest hydrological controls on floodplain ecosystem structure and carbon budgets are likely at least partially expressed by variations in growing season length.

Novel Method for High-Throughput Full-Length IGHV-D-J Sequencing of the Immune Repertoire from Bulk B-Cells with Single-Cell Resolution.

PubMed

Vergani, Stefano; Korsunsky, Ilya; Mazzarello, Andrea Nicola; Ferrer, Gerardo; Chiorazzi, Nicholas; Bagnara, Davide

2017-01-01

Efficient and accurate high-throughput DNA sequencing of the adaptive immune receptor repertoire (AIRR) is necessary to study immune diversity in healthy subjects and disease-related conditions. The high complexity and diversity of the AIRR coupled with the limited amount of starting material, which can compromise identification of the full biological diversity makes such sequencing particularly challenging. AIRR sequencing protocols often fail to fully capture the sampled AIRR diversity, especially for samples containing restricted numbers of B lymphocytes. Here, we describe a library preparation method for immunoglobulin sequencing that results in an exhaustive full-length repertoire where virtually every sampled B-cell is sequenced. This maximizes the likelihood of identifying and quantifying the entire IGHV-D-J repertoire of a sample, including the detection of rearrangements present in only one cell in the starting population. The methodology establishes the importance of circumventing genetic material dilution in the preamplification phases and incorporates the use of certain described concepts: (1) balancing the starting material amount and depth of sequencing, (2) avoiding IGHV gene-specific amplification, and (3) using Unique Molecular Identifier. Together, this methodology is highly efficient, in particular for detecting rare rearrangements in the sampled population and when only a limited amount of starting material is available.

Anti-proliferative effects of O-acyl-low-molecular-weight heparin derivatives on bovine pulmonary artery smooth muscle cells.

PubMed

Garg, Hari G; Mrabat, Hicham; Yu, Lunyin; Hales, Charles A; Li, Boyangzi; Moore, Casey N; Zhang, Fuming; Linhardt, Robert J

2011-08-01

Heparin (HP) inhibits the growth of several cell types in vitro including bovine pulmonary artery (BPA) smooth muscle cells (SMCs). In initial studies we discovered that an O-hexanoylated low-molecular-weight (LMW) HP derivative having acyl groups with 6-carbon chain length was more potent inhibitor of BPA-SMCs than the starting HP. We prepared several O-acylated LMWHP derivatives having 4-, 6-, 8-, 10-, 12-, and 18- carbon acyl chain lengths to determine the optimal acyl chain length for maximum anti-proliferative properties of BPA-SMCs. The starting LMWHP was prepared from unfractionated HP by sodium periodate treatment followed by sodium borohydride reduction. The tri-n-butylammonium salt of this LMWHP was O-acylated with butanoic, hexanoic, octanoic, decanoic, dodecanoic, and stearyl anhydrides separately to give respective O-acylated LMWHP derivatives. Gradient polyacrylamide gel electrophoresis (PAGE) was used to examine the average molecular weights of those O-acylated LMWHP derivatives. NMR analysis indicated the presence of one O-acyl group per disaccharide residue. Measurement of the inhibition of BPA-SMCS as a function of O-acyl chain length shows two optima, at a carbon chain length of 6 (O-hexanoylated LMWHP) and at a carbon chain length 12-18 (O-dodecanoyl and O-stearyl LMWHPs). A solution competition SPR study was performed to test the ability of different O-acylated LMWHP derivatives to inhibit fibroblast growth factor (FGF) 1 and FGF2 binding to surface-immobilized heparin. All the LMWHP derivatives bound to FGF1 and FGF2 but each exhibited slightly different binding affinity.

Starting characteristics and combustion performance of magnesium slurry in 6.5-inch-diameter ram-jet engine mounted in connected-pipe facility

NASA Technical Reports Server (NTRS)

Gibbs, James B

1954-01-01

The starting characteristics and combustion performance of slurry type fuels, consisting of 50 percent magnesium powder in a hydrocarbon carrier, have been investigated in a flight-type, 6.5-inch-diameter ram-jet engine in a connected-pipe facility. Quick, dependable starting of the engine was obtained by the use of a disk which blocked part of the combustor area downstream of the flame holder. Acceptable performance was achieved with a short fuel-air mixing length by the development of a fuel-distribution control sleeve.

Trade-offs between global warming and day length on the start of the carbon uptake period in seasonally cold ecosystems

NASA Astrophysics Data System (ADS)

Wohlfahrt, Georg; Cremonese, Edoardo; Hammerle, Albin; Hörtnagl, Lukas; Galvagno, Marta; Gianelle, Damiano; Marcolla, Barbara; Cella, Umberto Morra

2013-12-01

is well established that warming leads to longer growing seasons in seasonally cold ecosystems. Whether this goes along with an increase in the net ecosystem carbon dioxide (CO2) uptake is much more controversial. We studied the effects of warming on the start of the carbon uptake period (CUP) of three mountain grasslands situated along an elevational gradient in the Alps. To this end, we used a simple empirical model of the net ecosystem CO2 exchange, calibrated, and forced with multiyear empirical data from each site. We show that reductions in the quantity and duration of daylight associated with earlier snowmelts were responsible for diminishing returns, in terms of carbon gain, from longer growing seasons caused by reductions in daytime photosynthetic uptake and increases in nighttime losses of CO2. This effect was less pronounced at high, compared to low, elevations, where the start of the CUP occurred closer to the summer solstice when changes in day length and incident radiation are minimal.

Tradeoffs between global warming and day length on the start of the carbon uptake period in seasonally cold ecosystems.

PubMed

Wohlfahrt, Georg; Cremonese, Edoardo; Hammerle, Albin; Hörtnagl, Lukas; Galvagno, Marta; Gianelle, Damiano; Marcolla, Barbara; di Cella, Umberto Morra

2013-12-16

It is well established that warming leads to longer growing seasons in seasonally cold ecosystems. Whether this goes along with an increase in the net ecosystem carbon dioxide (CO 2 ) uptake is much more controversial. We studied the effects of warming on the start of the carbon uptake period (CUP) of three mountain grasslands situated along an elevational gradient in the Alps. To this end we used a simple empirical model of the net ecosystem CO 2 exchange, calibrated and forced with multi-year empirical data from each site. We show that reductions in the quantity and duration of daylight associated with earlier snowmelts were responsible for diminishing returns, in terms of carbon gain, from longer growing seasons caused by reductions in daytime photosynthetic uptake and increases in nighttime losses of CO 2 . This effect was less pronounced at high, compared to low, elevations, where the start of the CUP occurred closer to the summer solstice when changes in day length and incident radiation are minimal.

Early warning of West Nile virus mosquito vector: climate and land use models successfully explain phenology and abundance of Culex pipiens mosquitoes in north-western Italy.

PubMed

Rosà, Roberto; Marini, Giovanni; Bolzoni, Luca; Neteler, Markus; Metz, Markus; Delucchi, Luca; Chadwick, Elizabeth A; Balbo, Luca; Mosca, Andrea; Giacobini, Mario; Bertolotti, Luigi; Rizzoli, Annapaola

2014-06-12

West Nile Virus (WNV) is an emerging global health threat. Transmission risk is strongly related to the abundance of mosquito vectors, typically Culex pipiens in Europe. Early-warning predictors of mosquito population dynamics would therefore help guide entomological surveillance and thereby facilitate early warnings of transmission risk. We analysed an 11-year time series (2001 to 2011) of Cx. pipiens mosquito captures from the Piedmont region of north-western Italy to determine the principal drivers of mosquito population dynamics. Linear mixed models were implemented to examine the relationship between Cx. pipiens population dynamics and environmental predictors including temperature, precipitation, Normalized Difference Water Index (NDWI) and the proximity of mosquito traps to urban areas and rice fields. Warm temperatures early in the year were associated with an earlier start to the mosquito season and increased season length, and later in the year, with decreased abundance. Early precipitation delayed the start and shortened the length of the mosquito season, but increased total abundance. Conversely, precipitation later in the year was associated with a longer season. Finally, higher NDWI early in the year was associated with an earlier start to the season and increased season length, but was not associated with abundance. Proximity to rice fields predicted higher total abundance when included in some models, but was not a significant predictor of phenology. Proximity to urban areas was not a significant predictor in any of our models. Predicted variations in start of the season and season length ranged from one to three weeks, across the measured range of variables. Predicted mosquito abundance was highly variable, with numbers in excess of 1000 per trap per year when late season temperatures were low (average 21°C) to only 150 when late season temperatures were high (average 30°C). Climate data collected early in the year, in conjunction with local land use, can be used to provide early warning of both the timing and magnitude of mosquito outbreaks. This potentially allows targeted mosquito control measures to be implemented, with implications for prevention and control of West Nile Virus and other mosquito borne diseases.

Evaluation of vector-primed cDNA library production from microgram quantities of total RNA.

PubMed

Kuo, Jonathan; Inman, Jason; Brownstein, Michael; Usdin, Ted B

2004-12-15

cDNA sequences are important for defining the coding region of genes, and full-length cDNA clones have proven to be useful for investigation of the function of gene products. We produced cDNA libraries containing 3.5-5 x 10(5) primary transformants, starting with 5 mug of total RNA prepared from mouse pituitary, adrenal, thymus, and pineal tissue, using a vector-primed cDNA synthesis method. Of approximately 1000 clones sequenced, approximately 20% contained the full open reading frames (ORFs) of known transcripts, based on the presence of the initiating methionine residue codon. The libraries were complex, with 94, 91, 83 and 55% of the clones from the thymus, adrenal, pineal and pituitary libraries, respectively, represented only once. Twenty-five full-length clones, not yet represented in the Mammalian Gene Collection, were identified. Thus, we have produced useful cDNA libraries for the isolation of full-length cDNA clones that are not yet available in the public domain, and demonstrated the utility of a simple method for making high-quality libraries from small amounts of starting material.

Microcapsules on Streptococcus mutans serotypes by electron microscopy.

PubMed

Grenier, E M; Gray, R H; Loesche, W J; Eveland, W C

1977-02-01

Extracellular microcapsules have been demonstrated on cells of most serotypes of Streptococcus mutans by electron microscopy, using bacterial strains of the various serotypes and peroxidase labeled or unlabeled immune serum. A correlation was noted between the amount of capsular substance on the strains of S mutans examined and degree of antigenicity as expressed by the indirect fluorescent antibody (FA) title. A serotype d strain was shown to lose both antigenicity as determined by the FA reaction and capsular material as seen by electron microscopy with repeated in vitro passage. When 10% unheated rabbit serum was added to the medium, antigenicity and capsular material were restored.

Evolution of Combustion-Generated Particles at Tropospheric Conditions

NASA Technical Reports Server (NTRS)

Tacina, Kathleen M.; Heath, Christopher M.

2012-01-01

This paper describes particle evolution measurements taken in the Particulate Aerosol Laboratory (PAL). The PAL consists of a burner capable of burning jet fuel that exhausts into an altitude chamber that can simulate temperature and pressure conditions up to 13,700 m. After presenting results from initial temperature distributions inside the chamber, particle count data measured in the altitude chamber are shown. Initial particle count data show that the sampling system can have a significant effect on the measured particle distribution: both the value of particle number concentration and the shape of the radial distribution of the particle number concentration depend on whether the measurement probe is heated or unheated.

Application of the Solubility Parameter Concept to the Design of Chemiresistor Arrays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eastman, M.P.; Hughes, R.C.; Jenkins, M.W.

1999-01-11

Arrays of unheated chemically sensitive resistors (chemiresistors) can serve as extremely small, low-power-consumption sensors with simple read-out electronics. We report here results on carbon-loaded polymer composites, as well as polymeric ionic conductors, as chemiresistor sensors. We use the volubility parameter concept to understand and categorize the chemiresistor responses and, in particular, we compare chemiresistors fabricated from polyisobutylene (PIB) to results from PIB-coated acoustic wave sensors. One goal is to examine the possibility that a small number of diverse chemiresistors can sense all possible solvents-the "Universal Solvent Sensor Array". keywords: chemiresistor, volubility parameter, chemical sensor

Solid State Carbon Monoxide Sensor

NASA Technical Reports Server (NTRS)

Upchurch, Billy T. (Inventor); Wood, George M. (Inventor); Schryer, David R. (Inventor); Leighty, Bradley D. (Inventor); Oglesby, Donald M. (Inventor); Kielin, Erik J. (Inventor); Brown, Kenneth G. (Inventor); DAmbrosia, Christine M. (Inventor)

1999-01-01

A means for detecting carbon monoxide which utilizes an un-heated catalytic material to oxidize carbon monoxide at ambient temperatures. Because this reaction is exothermic, a thermistor in contact with the catalytic material is used as a sensing element to detect the heat evolved as carbon monoxide is oxidized to carbon dioxide at the catalyst surface, without any heaters or external heating elements for the ambient air or catalytic element material. Upon comparison to a reference thermistor, relative increases in the temperature of the sensing thermistor correspond positively with an increased concentration of carbon monoxide in the ambient medium and are thus used as an indicator of the presence of carbon monoxide.

Acoustic properties associated with rectangular geometry supersonic nozzles

NASA Technical Reports Server (NTRS)

Seiner, J. M.; Manning, J. C.; Ponton, M. K.

1986-01-01

Acoustic property experiments have been conducted to ascertain the behavior of rectangular geometry supersonic nozzles whose throat aspect ratios vary over a 2.0-7.6 range, and whose three partial sidewall geometries range from full to 75-percent cutback. The tests employed unheated air at static conditions for nozzle Mach numbers of 1.35-1.66. It is found that sonic fatigue failures are possible at certain partial sidewall geometries and high nozzle aspect ratios. Unlike axisymmetric supersonic nozzles, shock noise dominates both the rear and forward arc for throat aspect ratio cases greater than 5.6. Jet screech frequency was adequately predicted with a simple vortex sheel model.

Characterizing a Quantum Cascade Tunable Infrared Laser Differential Absorption Spectrometer (QC-TILDAS) for Measurements of Atmospheric Ammonia

NASA Astrophysics Data System (ADS)

Ellis, R.; Murphy, J. G.; van Haarlem, R.; Pattey, E.; O'Brien, J.

2009-05-01

A compact, fast response Quantum Cascade Tunable Infrared Laser Differential Absorption Spectrometer (QC- TILDAS) for measurements of ammonia has been evaluated under both laboratory and field conditions. Absorption of radiation from a pulsed, thermoelectrically cooled QC laser occurs at reduced pressure in a 76 m path length, 0.5 L volume multiple pass absorption cell. Detection is achieved using a thermoelectrically cooled HgCdTe infrared detector. A novel sampling technique was used, consisting of a short, heated, quartz inlet with a hydrophobic coating to minimize the adsorption of ammonia to surfaces. The inlet contains a critical orifice that reduces the pressure, a virtual impactor for separation of particles and additional ports for delivering ammonia free background air and calibration gas standards. This instrument has been found to have a detection limit of 0.3 ppb with a time resolution of 1 s. The sampling technique has been compared to the results of a conventional lead salt Tunable Diode Laser (TDL) absorption spectrometer during a laboratory intercomparison. Various lengths and types of sample inlet tubing material, heated and unheated, under dry and ambient humidity conditions with ammonia concentrations ranging from 10-1000 ppb were investigated. Preliminary analysis suggests the time response improves with the use of short, PFA tubing sampling lines. No significant improvement was observed when using a heated sampling line and humidity was seen to play an important role on the bi-exponential decay of ammonia. A field intercomparison of the QC-TILDAS with a modified Thermo 42C chemiluminescence based analyzer was also performed at Environment Canada's Centre for Atmospheric Research Experiments (CARE) in the rural town of Egbert, ON between May-July 2008. Background tests and calibrations using two different permeation tube sources and an ammonia gas cylinder were regularly carried out throughout the study. Results indicate a very good correlation (r2>0.9) between the two instruments at the beginning of the study, when regular background subtraction was applied to the QC- TILDAS.

Chain Length Dependence of Energies of Electron and Triplet Polarons in Oligofluorenes

DOE PAGES

Chen, Hung Cheng; Sreearunothai, Paiboon; Cook, Andrew R.; ...

2017-03-01

Bimolecular equilibria measured the one-electron reduction potentials and triplet free energies (ΔG° T) of oligo(9,9-dihexyl)fluorenes and a polymer with lengths of n = 1–10 and 57 repeat units. We can accurately measure one-electron potentials electrochemically only for the shorter oligomers. Starting at n = 1 the free energies change rapidly with increasing length and become constant for lengths longer than the delocalization length. Both the reduction potentials and triplet energies can be understood as the sum of a free energy for a fixed polaron and a positional entropy. Furthermore, the positional entropy increases gradually with length beyond the delocalization lengthmore » due to the possible occupation sites of the charge or the triplet exciton. Our results reinforce the view that charges and triplet excitons in conjugated chains exist as polarons and find that positional entropy can replace a popular empirical model of the energetics.« less

Examining the Relationship between Free Recall and Immediate Serial Recall: The Effects of List Length and Output Order

ERIC Educational Resources Information Center

Ward, Geoff; Tan, Lydia; Grenfell-Essam, Rachel

2010-01-01

In 4 experiments, participants were presented with lists of between 1 and 15 words for tests of immediate memory. For all tasks, participants tended to initiate recall with the first word on the list for short lists. As the list length was increased, so there was a decreased tendency to start with the first list item; and, when free to do so,…

Sarcomere Length and Tension Changes in Tetanized Frog Muscle Fibers after Quick Stretches and Releases

NASA Astrophysics Data System (ADS)

Sugi, Haruo; Kobayashi, Takakazu

1983-10-01

The sarcomere length changes in tetanized frog muscle fibers in response to quick fiber length changes were examined along the fiber length with a high-sensitivity laser diffraction technique. The experiments were only performed with muscle fibers in which the uniform orientation and sarcomere length of the component myofibrils were well preserved during a tetanus. When the sarcomere length changes were recorded near the fixed fiber end, the delay of the onset of sarcomere length change in response to the applied fiber length change tended to be longer than that of the onset of tension changes recorded at the fixed fiber end. The magnitude of sarcomere length changes was larger near the moving fiber end than near the fixed fiber end. In the case of quick releases, the resulting sarcomere shortening tended to outlast the fiber shortening, so that the quick tension recovery started during the sarcomere shortening. These results indicate (i) that the tension changes in response to quick fiber length changes may not give direct information about the cross-bridge properties and (ii) that the viscoelastic multisegmental nature of muscle fibers should be taken into consideration in interpreting the tension responses to quick length changes.

Minimally invasive surgery for endometrial cancer: does operative start time impact surgical and oncologic outcomes?

PubMed

Slaughter, Katrina N; Frumovitz, Michael; Schmeler, Kathleen M; Nick, Alpa M; Fleming, Nicole D; dos Reis, Ricardo; Munsell, Mark F; Westin, Shannon N; Soliman, Pamela T; Ramirez, Pedro T

2014-08-01

Recent literature in ovarian cancer suggests differences in surgical outcomes depending on operative start time. We sought to examine the effects of operative start time on surgical outcomes for patients undergoing minimally invasive surgery for endometrial cancer. A retrospective review was conducted of patients undergoing minimally invasive surgery for endometrial cancer at a single institution between 2000 and 2011. Surgical and oncologic outcomes were compared between patients with an operative start time before noon and those with a surgical start time after noon. A total of 380 patients were included in the study (245 with start times before noon and 135 with start times after noon). There was no difference in age (p=0.57), number of prior surgeries (p=0.28), medical comorbidities (p=0.19), or surgical complexity of the case (p=0.43). Patients with surgery starting before noon had lower median BMI than those beginning after noon, 31.2 vs. 35.3 respectively (p=0.01). No significant differences were observed for intraoperative complications (4.4% of patients after noon vs. 3.7% of patients before noon, p=0.79), estimated blood loss (median 100 cc vs. 100 cc, p=0.75), blood transfusion rates (7.4% vs. 8.2%, p=0.85), and conversion to laparotomy (12.6% vs. 7.4%, p=0.10). There was no difference in operative times between the two groups (198 min vs. 216.5 min, p=0.10). There was no association between operative start time and postoperative non-infectious complications (11.9% vs. 11.0%, p=0.87), or postoperative infections (17.8% vs. 12.3%, p=0.78). Length of hospital stay was longer for surgeries starting after noon (median 2 days vs. 1 day, p=0.005). No differences were observed in rates of cancer recurrence (12.6% vs. 8.8%, p=0.39), recurrence-free survival (p=0.97), or overall survival (p=0.94). Our results indicate equivalent surgical outcomes and no increased risk of postoperative complications regardless of operative start time in minimally invasive endometrial cancer staging, despite longer length of hospital stay for surgeries beginning after noon. Copyright © 2014 Elsevier Inc. All rights reserved.

LenVarDB: database of length-variant protein domains.

PubMed

Mutt, Eshita; Mathew, Oommen K; Sowdhamini, Ramanathan

2014-01-01

Protein domains are functionally and structurally independent modules, which add to the functional variety of proteins. This array of functional diversity has been enabled by evolutionary changes, such as amino acid substitutions or insertions or deletions, occurring in these protein domains. Length variations (indels) can introduce changes at structural, functional and interaction levels. LenVarDB (freely available at http://caps.ncbs.res.in/lenvardb/) traces these length variations, starting from structure-based sequence alignments in our Protein Alignments organized as Structural Superfamilies (PASS2) database, across 731 structural classification of proteins (SCOP)-based protein domain superfamilies connected to 2 730 625 sequence homologues. Alignment of sequence homologues corresponding to a structural domain is available, starting from a structure-based sequence alignment of the superfamily. Orientation of the length-variant (indel) regions in protein domains can be visualized by mapping them on the structure and on the alignment. Knowledge about location of length variations within protein domains and their visual representation will be useful in predicting changes within structurally or functionally relevant sites, which may ultimately regulate protein function. Non-technical summary: Evolutionary changes bring about natural changes to proteins that may be found in many organisms. Such changes could be reflected as amino acid substitutions or insertions-deletions (indels) in protein sequences. LenVarDB is a database that provides an early overview of observed length variations that were set among 731 protein families and after examining >2 million sequences. Indels are followed up to observe if they are close to the active site such that they can affect the activity of proteins. Inclusion of such information can aid the design of bioengineering experiments.

The effect of length and starting year on trend analyses of temperatures in Spanish mainland (1951-2010). A general approach (I)

NASA Astrophysics Data System (ADS)

Gonzalez Hidalgo, Jose Carlos; Peña Angulo, Dhais; Salinas Solé, Celia; Jiménez Castañeda, Azucena; Brunetti, Michele

2017-04-01

One of the most interesting issues in climate analyses of trend is the comparison between different results. This is a difficult task not only because of different spatial density of information, or data format (raster or station), but also because they usually analyze different temporal periods, sometimes differing only in few years, and trend of time (climate) variables can vary dramatically accordingly length of period and starting year (Lüdecke et al., 2011). In this poster we present the global frame of an approach that during the last years has attracted the attention of some researchers: the moving windows analyze. Basically it consists in calculate the trends for all the possible period, combining length and starting year in any given series of climate variables. The analysis obviously only can be applied to one series of data (i.e. one station), and the results are usually presented in triangular diagrams. This approach has been applied to regional, national or global series both to temperature and precipitation (Brunetti et al., 2006; Liebmann et al., 2010; González.Hidalgo et al. 2010, 2016, between others). The spatial differences in the behavior of temperatures and precipitation during the last year has been noticed in many research, particularly when high density of stations has been used, so the question is how to use this approach in dozens, hundreds or thousands of stations? We present in this poster example of graphical analyses of moving windows, how to read the graphs, the possibility that this analyses offers, etc. In a sequence of posters the analyze is applied to a high-resolution grid of monthly temperatures of Spanish mainland, MOTEDAS dataset (1951-2010), at season and monthly temporal scale (see Winter-II, Spring-III, Summer-IV and Autumn-V Posters). To apply the approach we have used an ergodic transformations from time (each temporal series) to space (all the series in the same period), i.e. we present the results of season and monthly mean values of Tmax and Tmin trends by showing a collection of maps accordingly changes in period length and starting year. In the sequence of seasons (see Poster II-III-IV and V), we have selected particularly a decreasing length period from triangular diagram, i.e. from 1951-2010 until 1991- 2010 (the hypotenuse of graphical triangle), thus, we analyze all the possible trends in periods between 60-years and 20-years (considering that 20 years represent a minimum period for detect any climate signal).

The biologic error in gestational length related to the use of the first day of last menstrual period as a proxy for the start of pregnancy.

PubMed

Nakling, Jakob; Buhaug, Harald; Backe, Bjorn

2005-10-01

In a large unselected population of normal spontaneous pregnancies, to estimate the biologic variation of the interval from the first day of the last menstrual period to start of pregnancy, and the biologic variation of gestational length to delivery; and to estimate the random error of routine ultrasound assessment of gestational age in mid-second trimester. Cohort study of 11,238 singleton pregnancies, with spontaneous onset of labour and reliable last menstrual period. The day of delivery was predicted with two independent methods: According to the rule of Nägele and based on ultrasound examination in gestational weeks 17-19. For both methods, the mean difference between observed and predicted day of delivery was calculated. The variances of the differences were combined to estimate the variances of the two partitions of pregnancy. The biologic variation of the time from last menstrual period to pregnancy start was estimated to 7.0 days (standard deviation), and the standard deviation of the time to spontaneous delivery was estimated to 12.4 days. The estimate of the standard deviation of the random error of ultrasound assessed foetal age was 5.2 days. Even when the last menstrual period is reliable, the biologic variation of the time from last menstrual period to the real start of pregnancy is substantial, and must be taken into account. Reliable information about the first day of the last menstrual period is not equivalent with reliable information about the start of pregnancy.

Strength and Microstructure of Ceramics.

DTIC Science & Technology

1987-11-01

triangular slab. 12-mm edge length and 2-mm thickness. to produce crack 7 mm long. Starter notch length portantly. the strength plateau at small flaw sizes...however. a tapered the starter notch tip. "Pop-in" behavior of this kind is not uncom- geometry was used. width increasing in the direction of ultimate...mon in notched specimens, of course: in such cases the initial crack propagation. The main crack was started at a sawcut notch fracture response can be

Cathode fall measurement in a dielectric barrier discharge in helium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hao, Yanpeng; Zheng, Bin; Liu, Yaoge

2013-11-15

A method based on the “zero-length voltage” extrapolation is proposed to measure cathode fall in a dielectric barrier discharge. Starting, stable, and discharge-maintaining voltages were measured to obtain the extrapolation zero-length voltage. Under our experimental conditions, the “zero-length voltage” gave a cathode fall of about 185 V. Based on the known thickness of the cathode fall region, the spatial distribution of the electric field strength in dielectric barrier discharge in atmospheric helium is determined. The strong cathode fall with a maximum field value of approximately 9.25 kV/cm was typical for the glow mode of the discharge.

Breastfeeding FAQs: How Much and How Often

MedlinePlus

... Staying Safe Videos for Educators Search English Español Breastfeeding FAQs: How Much and How Often KidsHealth / For ... from the time my baby starts or stops nursing? You count the length between feedings from the ...

A review and analysis of boundary layer transition data for turbine application

NASA Technical Reports Server (NTRS)

Gaugler, R. E.

1985-01-01

A number of data sets from the open literature that include heat transfer data in apparently transitional boundary layers, with particular application to the turbine environment, were reviewed and analyzed to extract transition information. The data were analyzed by using a version of the STAN5 two-dimensional boundary layer code. The transition starting and ending points were determined by adjusting parameters in STAN5 until the calculations matched the data. The results are presented as a table of the deduced transition location and length as functions of the test parameters. The data sets reviewed cover a wide range of flow conditions, from low-speed, flat-plate tests to full-scale turbine airfoils operating at simulated turbine engine conditions. The results indicate that free-stream turbulence and pressure gradient have strong, and opposite, effects on the location of the start of transition and on the length of the transition zone.

Climate change effect on Betula (birch) and Quercus (oak) pollen seasons in US

PubMed Central

Zhang, Yong; Bielory, Leonard; Georgopoulos, Panos G.

2013-01-01

Climatic change is expected to affect the spatiotemporal patterns of airborne allergenic pollen, which has been found to act synergistically with common air pollutants, such as ozone, to cause Allergic Airway Disease (AAD). Observed airborne pollen data from six stations from 1994 to 2011 at Fargo (North Dakota), College Station (Texas), Omaha (Nebraska), Pleasanton (California), Cherry Hill and Newark (New Jersey) in the US were studied to examine climate change effects on trends of annual mean and peak value of daily concentrations, annual production, season start, and season length of Betula (birch) and Quercus (oak) pollen. The Growing Degree Hour (GDH) model was used to establish a relationship between start/end dates and differential temperature sums using observed hourly temperatures from surrounding meteorology stations. Optimum GDH models were then combined with meteorological information from the Weather Research and Forecasting (WRF) model, and land use land coverage data from the Biogenic Emissions Land use Database, version 3.1 (BELD3.1), to simulate start dates and season lengths of birch and oak pollen for both past and future years across the contiguous US (CONUS). For most of the studied stations, comparison of mean pollen indices between the periods of 1994–2000 and 2001–2011 showed that birch and oak trees were observed to flower 1–2 weeks earlier; annual mean and peak value of daily pollen concentrations tended to increase by 13.6%–248%. The observed pollen season lengths varied for birch and for oak across the different monitoring stations. Optimum initial date, base temperature, and threshold GDH for start date was found to be March 1, 8°C, and 1879 hours respectively for birch; March 1, 5°C, and 4760 hours respectively for oak. Simulation results indicated that responses of birch and oak pollen seasons to climate change are expected to vary for different regions. PMID:23793955

Determination of Pass/Fail Criteria for Promoted Combustion Testing

NASA Technical Reports Server (NTRS)

Sparks, Kyle M.; Stoltzfus, Joel M.; Steinberg, Theodore A.; Lynn, David

2009-01-01

Promoted ignition testing is used to determine the relative flammability of metal rods in oxygen-enriched atmospheres. In these tests, a promoter is used to ignite each metal rod to start the sample burning. Experiments were performed to better understand the promoted ignition test by obtaining insight into the effect a burning promoter has on the preheating of a test sample. Test samples of several metallic materials were prepared and coupled to fast-responding thermocouples along their length. Various ignition promoters were used to ignite the test samples. The thermocouple measurements and test video was synchronized to determine temperature increase with respect to time and length along each test sample. A recommended length of test sample that must be consumed to be considered a flammable material was determined based on the preheated zone measured from these tests. This length was determined to be 30 mm (1.18 in.). Validation of this length and its rationale are presented.

Population Dynamics of Aphids on Cereals: Digging in the Time-Series Data to Reveal Population Regulation Caused by Temperature

PubMed Central

Brabec, Marek; Honěk, Alois; Pekár, Stano; Martinková, Zdenka

2014-01-01

Aphid populations show periodic fluctuations and many causes are attributed to their dynamic. We investigated the regulation by temperature of the aphid populations composed of Metopolophium dirhodum, Sitobion avenae, and Rhopalosiphum padi on winter wheat using a 24 years long time series data. We computed the sum of daily temperatures above 5°C, the threshold temperature for aphid development, and the sum of daily temperatures within the [0(threshold for wheat development),5] °C interval. Applying Generalised Additive Model framework we tested influences of temperature history expressed via degree days before the start of the aphid immigration on the length of their occurrence. We aimed to estimate the magnitude and direction of this influence, and how far to the past before the start of the aphid season the temperature effect goes and then identify processes responsible for the effect. We fitted four models that differed in the way of correcting for abundance in the previous year and in specification of temperature effects. Abundance in the previous year did not affect the length of period of aphid population growth on wheat. The temperature effect on the period length increased up to 123 days before the start of the current season, i.e. when wheat completed vernalization. Increased sum of daily temperatures above 5°C and the sum of daily temperatures within the [0,5] °C interval both shortened the length of period of aphid population growth. Stronger effect of the latter suggests that wheat can escape from aphid attacks if during winter temperatures range from 0 to 5°C. The temperature influence was not homogeneous in time. The strongest effect of past temperature was about 50 to 80 and 90 to 110 days before the beginning of the current aphid season indicating important role of termination of aphid egg dormancy and egg hatching. PMID:25184219

Predictors of femtosecond laser intrastromal astigmatic keratotomy efficacy for astigmatism management in cataract surgery.

PubMed

Day, Alexander C; Stevens, Julian D

2016-02-01

To evaluate the factors associated with the efficacy of femtosecond laser intrastromal astigmatic keratotomy (AK). Moorfields Eye Hospital, London, United Kingdom. Prospective case series. Eyes having intrastromal AK for corneal cylinder correction were analyzed. Preoperative biometric parameters included axial length, anterior chamber depth, central corneal thickness, and Ocular Response Analyzer corneal hysteresis (CH) and corneal resistance factor (CRF). Preoperative and 1-month postoperative corneal keratometry was measured using the Topcon KR8100PA topographer-autorefractor. Astigmatic analyses were performed using the Alpins method. The study analyzed 319 eyes of 213 patients with a mean target induced astigmatism of 1.24 diopters (D) ± 0.44 (SD), mean surgically induced astigmatism (SIA) of 0.71 ± 0.43 D, and mean difference vector of 0.79 ± 0.41 D. Two multiple regression models were constructed for SIA prediction. Model 1, based on previous manual limbal relaxing incision parameters, confirmed age and astigmatism meridian (with/against the rule and oblique) to be associated with SIA in addition to AK arc length, AK start depth, and preoperative corneal cylinder magnitude. Model 2, additionally considering other parameters, found only lower CH (-0.06 DC per unit CH), a higher CRF (0.04 D per unit CRF), and the astigmatism meridian to be independent predictors of greater SIA (after adjusting for intrastromal AK arc length, start depth, and preoperative corneal cylinder). With-the-rule astigmatism was associated with a 0.13 D higher SIA than against-the-rule astigmatism, holding all other variables constant. Corneal biomechanical parameters and astigmatism meridian were independent predictors of femtosecond laser intrastromal AK efficacy even after adjusting for AK arc length, AK start depth, and preoperative corneal cylinder. Dr. Stevens is a previous consultant to Optimedica, Inc. which is now part of Abbott Medical Optics, Inc. Drs. Stevens and Day have no financial or proprietary interest in any material or method mentioned. Copyright © 2016 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crăciunescu, Corneliu M., E-mail: corneliu.craciunescu@upt.ro; Mitelea, Ion, E-mail: corneliu.craciunescu@upt.ro; Budău, Victor, E-mail: corneliu.craciunescu@upt.ro

Shape memory alloy films belonging to the NiTi-based systems were deposited on heated and unheated substrates, by magnetron sputtering in a custom made system, and their structure and composition was analyzed using electron microscopy. Several substrates were used for the depositions: glass, Cu-Zn-Al, Cu-Al-Ni and Ti-NiCu shape memory alloy ribbons and kapton. The composition of the Ti-Ni-Cu films showed limited differences, compared to the one of the target and the microstructure for the DC magnetron sputtering revealed crystallized structure with features determined on peel off samples from a Si wafer. Both inter and transcrystalline fractures were observed and related tomore » the interfacial stress developed on cooling from deposition temperature.« less

Baked Milk and Egg Diets for Milk and Egg Allergy Management.

PubMed

Leonard, Stephanie A; Nowak-Węgrzyn, Anna H

2016-02-01

In baked form, cow's milk and egg are less allergenic and are tolerated by most milk- and egg-allergic children. Not only may including baked milk and egg in the diets of children who are tolerant improve nutrition and promote more social inclusion but there is also evidence that inclusion may accelerate the resolution of unheated milk and egg allergy. Further research is needed on biomarkers that can predict baked milk or egg reactivity; however, data suggest casein- and ovomucoid-specific immunoglobulin E levels may be useful. Physician-supervised introduction of baked milk and egg is recommended because anaphylaxis has occurred. Copyright © 2016 Elsevier Inc. All rights reserved.

Performance gains by using heated natural-gas fuel in an annular turbojet combustor

NASA Technical Reports Server (NTRS)

Marchionna, N. R.

1973-01-01

A full-scale annular turbojet combustor was tested with natural gas fuel heated from ambient temperature to 800 K (980 F). In all tests, heating the fuel improved combustion efficiency. Two sets of gaseous fuel nozzles were tested. Combustion instabilities occurred with one set of nozzles at two conditions: one where the efficiency approached 100 percent with the heated fuel; the other where the efficiency was very poor with the unheated fuel. The second set of nozzles exhibited no combustion instability. Altitude relight tests with the second set showed that relight was improved and was achievable at essentially the same condition as blowout when the fuel temperature was 800 K (980 F).

Internal Performance Evaluation of a Two Position Divergent Shroud Ejector

NASA Technical Reports Server (NTRS)

Mihaloew, James R.; Stofan, Andrew J.

1960-01-01

A two-position divergent shroud ejector was investigated in an unheated quiescent-air facility over a range of operational variables applicable to a Mach 2.5 aircraft. The performance data are shown in terms of hypothetical engine operating conditions to illustrate variations of performance with Mach number. The overall thrust performance was reasonably good, with ejector thrust ratios ranging from 0.97 to 0.98 for all conditions except that corresponding to acceleration with afterburning through the transonic flight Mach number region from 0.9 to 1.1, where the ejector thrust ratio decreased to as low as 0.945 for an ejector corrected weight-flow ratio of 0.105.

Effect of Different Cooling Regimes on the Mechanical Properties of Cementitious Composites Subjected to High Temperatures

PubMed Central

Yu, Jiangtao; Weng, Wenfang; Yu, Kequan

2014-01-01

The influence of different cooling regimes (quenching in water and cooling in air) on the residual mechanical properties of engineered cementitious composite (ECC) subjected to high temperature up to 800°C was discussed in this paper. The ECC specimens are exposed to 100, 200, 400, 600, and 800°C with the unheated specimens for reference. Different cooling regimens had a significant influence on the mechanical properties of postfire ECC specimens. The microstructural characterization was examined before and after exposure to fire deterioration by using scanning electron microscopy (SEM). Results from the microtest well explained the mechanical properties variation of postfire specimens. PMID:25161392

Effects of ballet training of children in Turkey on foot anthropometric measurements and medial longitudinal arc development.

PubMed

Ozdinc, Sevgi Anar; Turan, Fatma Nesrin

2016-07-01

To investigate the effects of ballet training on foot structure and the formation of the medial longitudinal arc in childhood, and the association of body mass index with structural change secondary to ballet training. This study was conducted at Öykü Ballet and Dance School and Trakya University, Edirne, Turkey, from September 2007 to November 2008, and comprised girl students who were taking ballet classes, and a group of those who were not taking such who acted as the controls. Static footprints of both feet of all participants were taken with an ink paedogram. Parameters evaluated from footprints included foot length, metatarsal width, heel width and medial longitudinal arch. The relationship between the parameters, the ballet starting age, training duration and body mass index was investigated. Of the 67 participants, there were 36(53.7%) in the experimental group and 31(48.3%) in the control group. The difference between age, height, weight and body mass index between the two groups was insignificant (p>0.05). The average ballet starting age was 6.47±1.55 years and duration was 4.36±2.002 years. Positive correlations were found between body mass index and foot length, metatarsal width, heel width, medial longitudinal arch contact width and halluxvalgus angle; between ballet starting age and metatarsal width, heel width; between duration of training and foot length, metatarsal width and hallux valgus angle (p?0.05 each). Evidence supporting the education in children on foot anthropometric measurements and medial longitudinal arc development could not be found.

The crack and wedging problem for an orthotropic strip

NASA Technical Reports Server (NTRS)

Cinar, A.; Erdogan, F.

1982-01-01

The plane elasticity problem for an orthotropic strip containing a crack parallel to its boundaries is considered. The problem is formulated under general mixed mode loading conditions. The stress intensity factors depend on two dimensionless orthotropic constants only. For the crack problem the results are given for a single crack and two collinear cracks. The calculated results show that of the two orthotropic constants the influence of the stiffness ratio on the stress intensity factors is much more significant than that of the shear parameter. The problem of loading the strip by a rigid rectangular lengths continuous contact is maintained along the wedge strip interface; at a certain critical wedge length the separation starts at the midsection of the wedge, and the length of the separation zone increases rapidly with increasing wedge length.

Offset Stream Technology Test-Summary of Results

NASA Technical Reports Server (NTRS)

Brown, Clifford A.; Bridges, James E.; Henderson, Brenda

2007-01-01

Statistical jet noise prediction codes that accurately predict spectral directivity for both cold and hot jets are highly sought both in industry and academia. Their formulation, whether based upon manipulations of the Navier-Stokes equations or upon heuristic arguments, require substantial experimental observation of jet turbulence statistics. Unfortunately, the statistics of most interest involve the space-time correlation of flow quantities, especially velocity. Until the last 10 years, all turbulence statistics were made with single-point probes, such as hotwires or laser Doppler anemometry. Particle image velocimetry (PIV) brought many new insights with its ability to measure velocity fields over large regions of jets simultaneously; however, it could not measure velocity at rates higher than a few fields per second, making it unsuitable for obtaining temporal spectra and correlations. The development of time-resolved PIV, herein called TR-PIV, has removed this limitation, enabling measurement of velocity fields at high resolution in both space and time. In this paper, ground-breaking results from the application of TR-PIV to single-flow hot jets are used to explore the impact of heat on turbulent statistics of interest to jet noise models. First, a brief summary of validation studies is reported, undertaken to show that the new technique produces the same trusted results as hotwire at cold, low-speed jets. Second, velocity spectra from cold and hot jets are compared to see the effect of heat on the spectra. It is seen that heated jets possess 10 percent more turbulence intensity compared to the unheated jets with the same velocity. The spectral shapes, when normalized using Strouhal scaling, are insensitive to temperature if the stream-wise location is normalized relative to the potential core length. Similarly, second order velocity correlations, of interest in modeling of jet noise sources, are also insensitive to temperature as well.

Effect of Temperature on Jet Velocity Spectra

NASA Technical Reports Server (NTRS)

Bridges, James E.; Wernet, Mark P.

2007-01-01

Statistical jet noise prediction codes that accurately predict spectral directivity for both cold and hot jets are highly sought both in industry and academia. Their formulation, whether based upon manipulations of the Navier-Stokes equations or upon heuristic arguments, require substantial experimental observation of jet turbulence statistics. Unfortunately, the statistics of most interest involve the space-time correlation of flow quantities, especially velocity. Until the last 10 years, all turbulence statistics were made with single-point probes, such as hotwires or laser Doppler anemometry. Particle image velocimetry (PIV) brought many new insights with its ability to measure velocity fields over large regions of jets simultaneously; however, it could not measure velocity at rates higher than a few fields per second, making it unsuitable for obtaining temporal spectra and correlations. The development of time-resolved PIV, herein called TR-PIV, has removed this limitation, enabling measurement of velocity fields at high resolution in both space and time. In this paper, ground-breaking results from the application of TR-PIV to single-flow hot jets are used to explore the impact of heat on turbulent statistics of interest to jet noise models. First, a brief summary of validation studies is reported, undertaken to show that the new technique produces the same trusted results as hotwire at cold, low-speed jets. Second, velocity spectra from cold and hot jets are compared to see the effect of heat on the spectra. It is seen that heated jets possess 10 percent more turbulence intensity compared to the unheated jets with the same velocity. The spectral shapes, when normalized using Strouhal scaling, are insensitive to temperature if the stream-wise location is normalized relative to the potential core length. Similarly, second order velocity correlations, of interest in modeling of jet noise sources, are also insensitive to temperature as well.

Cooperative and noncooperative magnetization reversal in alnicos

DOE PAGES

Skomski, Ralph; Ke, Liqin; Kramer, Matthew J.; ...

2017-02-08

Here, we investigate how magnetostatic interactions affect the coercivity of alnico-type magnets. Starting from exact micromagnetic relations, we also analyze two limits, namely cooperative reversal processes operative on short lengths scales and noncooperative reversal processes on long length scales. Furthermore, in alnicos, intrawire interactions are predominantly cooperative, whereas interwire effects are typically noncooperative. However, the transition between the regimes depends on feature size and hysteresis-loop shape, and interwire cooperative effects are largest for nearly rectangular loops. Our analysis revises the common shape-anisotropy interpretation of alnicos.

An experimental test of effects of ambient temperature and roost quality on aggregation by little brown bats (Myotis lucifugus).

PubMed

Webber, Quinn M R; Willis, Craig K R

2018-05-01

Environmental factors, such as ambient temperature (T a ) or roost/nest quality, can influence social behaviour of small-bodied endotherms because individuals may aggregate for social thermoregulation when T a is low or select the warmest possible sites for roosting. Female temperate bats form maternity colonies in spring to communally raise pups and exploit social thermoregulation. They also select roosts with warm microclimates because low roost temperature (T roost ) delays juvenile development. We studied captive female little brown bats (Myotis lucifugus) to test the hypothesis that variation in T a and T roost influence social group size. First, we predicted that female bats would preferentially select artificially heated roosts over unheated roosts. Second, we predicted that, as T a decreased, group size would increase because bats would rely more heavily on social thermoregulation. Third, we predicted that experimentally increasing T roost (i.e., roost quality) above T a would result in larger group sizes due to greater aggregation in high quality roosts. We captured 34 females from a maternity colony and housed them in a flight-tent provisioned with four bat boxes. Each box was outfitted with a heating pad and thermostat. Over the course of eight-days we heated each roost box in sequence to near thermoneutral T roost for two days. Bats preferentially selected heated roosts over unheated roosts but, contrary to our prediction, group size decreased when T roost was much greater than T a (i.e., when the benefits of a warm roost should have been highest). Our results suggest that social thermoregulation and the availability of warm roosts influence aggregation in bats and have implications for the potential of summer habitat protection and enhancement to help bat populations in the face of threats like white-nose syndrome. Copyright © 2018 Elsevier Ltd. All rights reserved.

Delivery of paclitaxel from cobalt–chromium alloy surfaces without polymeric carriers

PubMed Central

Mani, Gopinath; Macias, Celia E.; Feldman, Marc D.; Marton, Denes; Oh, Sunho; Agrawal, C. Mauli

2014-01-01

Polymer-based carriers are commonly used to deliver drugs from stents. However, adverse responses to polymer coatings have raised serious concerns. This research is focused on delivering drugs from stents without using polymers or any carriers. Paclitaxel (PAT), an anti-restenotic drug, has strong adhesion towards a variety of material surfaces. In this study, we have utilized such natural adhesion property of PAT to attach these molecules directly to cobalt–chromium (Co–Cr) alloy, an ultra-thin stent strut material. Four different groups of drug coated specimens were prepared by directly adding PAT to Co–Cr alloy surfaces: Group-A (PAT coated, unheated, and ethanol cleaned); Group-B (PAT coated, heat treated, and ethanol cleaned); Group-C (PAT coated, unheated, and not ethanol cleaned); and Group-D (PAT coated, heat treated and not ethanol cleaned). In vitro drug release of these specimens was investigated using high performance liquid chromatography. Groups A and B showed sustained PAT release for up to 56 days. A simple ethanol cleaning procedure after PAT deposition can remove the loosely bound drug crystals from the alloy surfaces and thereby allowing the remaining strongly bound drug molecules to be released at a sustained rate. The heat treatment after PAT coating further improved the stability of PAT on Co–Cr alloy and allowed the drug to be delivered at a much slower rate, especially during the initial 7 days. The specimens which were not cleaned in ethanol, Groups C and D, showed burst release. PAT coated Co–Cr alloy specimens were thoroughly characterized using scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. These techniques were collectively useful in studying the morphology, distribution, and attachment of PAT molecules on Co–Cr alloy surfaces. Thus, this study suggests the potential for delivering paclitaxel from Co–Cr alloy surfaces without using any carriers. PMID:20398928

A comparative study of volatile contents of primitive arc bubble-bearing melt inclusions determined by Raman-spectroscopy and mass-balance versus experimental homogenization methods

NASA Astrophysics Data System (ADS)

Moore, L.; Mironov, N.; Portnyagin, M.; Gazel, E.; Bodnar, R. J.

2016-12-01

Primitive olivine-hosted melt inclusions (MI) are a useful means to estimate the pre-eruptive volatile contents of a volcanic melts but post-entrapment processes complicate this approach. In particular, crystallization of the host phase along the wall of the MI and diffusion of H+ through the host cause CO2 and potentially S or other volatiles to exsolve from the melt to a separate fluid bubble. Recently, experimental rehydration and Raman spectroscopy have become potential methods for restoring the volatile contents of MI by rehomogenization or through mass balance calculations respectively. In order to compare these two approaches, we have studied MI from a single suite of samples from Klyuchevsky volcano (Kamchatka Arc) that have been treated with both experimental rehydration and analyzed using Raman spectroscopy. The maximum MI CO2 contents are in agreement ( 4000 ppm) regardless of the method used to account for CO2 in the bubble, but there is significantly more scatter to lower values using the Raman method which can be attributed to uncertainty related to mass balance calculations and carbonate daughter minerals that have formed at the glass-bubble interface. The presence of S- and C-bearing daughter minerals on the surface of the bubble in unheated melt inclusions indicates that to obtain more confident results with Raman spectroscopy, naturally quenched MIs should be also shortly reheated to dissolve most or all the crystals at the glass-bubble interface. Concerning H2O, MI from the unheated tephra samples contain less H2O than rehydrated MI in lavas. Determining the original H2O content of rehydrated MI is difficult because the H2O concentration in the glass is controlled by the conditions during the rehydration experiment. Thus reconciling the initial H2O content in primitive arc MIs (and degree of H2O loss) still remains a challenging task.

The crack and wedging problem for an orthotropic strip

NASA Technical Reports Server (NTRS)

Cinar, A.; Erdogan, F.

1983-01-01

The plane elasticity problem for an orthotropic strip containing a crack parallel to its boundaries is considered. The problem is formulated under general mixed mode loading conditions. The stress intensity factors depend on two dimensionless orthotropic constants only. For the crack problem the results are given for a single crack and two collinear cracks. The calculated results show that of the two orthotropic constants the influence of the stiffness ratio on the stress intensity factors is much more significant than that of the shear parameter. The problem of loading the strip by a rigid rectangular lengths continuous contact is maintained along the wedge strip interface; at a certain critical wedge length the separation starts at the midsection of the wedge, and the length of the separation zone increases rapidly with increasing wedge length. Previously announced in STAR as N82-26707

Emergence of an optimal search strategy from a simple random walk

PubMed Central

Sakiyama, Tomoko; Gunji, Yukio-Pegio

2013-01-01

In reports addressing animal foraging strategies, it has been stated that Lévy-like algorithms represent an optimal search strategy in an unknown environment, because of their super-diffusion properties and power-law-distributed step lengths. Here, starting with a simple random walk algorithm, which offers the agent a randomly determined direction at each time step with a fixed move length, we investigated how flexible exploration is achieved if an agent alters its randomly determined next step forward and the rule that controls its random movement based on its own directional moving experiences. We showed that our algorithm led to an effective food-searching performance compared with a simple random walk algorithm and exhibited super-diffusion properties, despite the uniform step lengths. Moreover, our algorithm exhibited a power-law distribution independent of uniform step lengths. PMID:23804445

Emergence of an optimal search strategy from a simple random walk.

PubMed

Sakiyama, Tomoko; Gunji, Yukio-Pegio

2013-09-06

In reports addressing animal foraging strategies, it has been stated that Lévy-like algorithms represent an optimal search strategy in an unknown environment, because of their super-diffusion properties and power-law-distributed step lengths. Here, starting with a simple random walk algorithm, which offers the agent a randomly determined direction at each time step with a fixed move length, we investigated how flexible exploration is achieved if an agent alters its randomly determined next step forward and the rule that controls its random movement based on its own directional moving experiences. We showed that our algorithm led to an effective food-searching performance compared with a simple random walk algorithm and exhibited super-diffusion properties, despite the uniform step lengths. Moreover, our algorithm exhibited a power-law distribution independent of uniform step lengths.

Determinants of Major League Baseball Pitchers' Career Length.

PubMed

Hardy, Rich; Ajibewa, Tiwaloluwa; Bowman, Ray; Brand, Jefferson C

2017-02-01

To investigate variables (injury, position, performance, and pitching volume) that affect the career longevity of Major League Baseball pitchers. To be eligible, pitchers must have entered Major League Baseball between 1989 and 1992 without missing information for the variables on the website http://www.baseball-reference.com. The variables assessed were average innings pitched per year before and after age 25 years, earned run average, walks and hits divided by innings pitched, strikeout to walk ratio, pitching position, time on the disabled list, length of career, and starting and retirement age. We used analysis of variance to compare the differences between groups and a regression model to assess the relationship between variables before age 25 years and career length. Mean retirement age for the group was 31.74 (95% confidence interval 30.83-32.65) and mean career length was 10.97 (95% confidence interval, 10.02-11.92) years. Innings pitched after age 25 years increased slightly, but not significantly, from the number of innings pitched before age 25 years, 85.35 versus 74.25, P = .5063. Career earned run average was not significantly different after age 25 years compared with before age 25 years, 4.83 versus 5.58, respectively, P = .8834. Both strikeout to walk ratio, 1.55 to 1.77, P = .0022, and walks and hits divided by innings pitched, 1.63 to 1.50, P = .0339, improved significantly after age 25 years compared with before age 25 years. The position the player started and ended his career (starter or reliever) did not influence career length. Multiple regression analysis comparing the variables from before age 25 revealed only the number of innings pitched before age 25 were positively related to career length, R 2  = 0.1408, P < .0001. All other variables analyzed before age 25 years were not significantly related to career length. The only studied variable that had significant relationship, which was weak to low, with career length was innings pitched per year before age 25 years. All other variables analyzed before age 25 years were not significantly related to career length. Level IV, case series. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

The primary structure of the Saccharomyces cerevisiae gene for 3-phosphoglycerate kinase.

PubMed Central

Hitzeman, R A; Hagie, F E; Hayflick, J S; Chen, C Y; Seeburg, P H; Derynck, R

1982-01-01

The DNA sequence of the gene for the yeast glycolytic enzyme, 3-phosphoglycerate kinase (PGK), has been obtained by sequencing part of a 3.1 kbp HindIII fragment obtained from the yeast genome. The structural gene sequence corresponds to a reading frame of 1251 bp coding for 416 amino acids with no intervening DNA sequences. The amino acid sequence is approximately 65 percent homologous with human and horse PGK protein sequences and is in general agreement with the published protein sequence for yeast PGK. As for other highly expressed structural genes in yeast, the coding sequence is highly codon biased with 95 percent of the amino acids coded for by a select 25 codons (out of 61 possible). Besides structural DNA sequence, 291 bp of 5'-flanking sequence and 286 bp of 3'-flanking sequence were determined. Transcription starts 36 nucleotides upstream from the translational start and stops 86-93 nucleotides downstream from the translational stop. These results suggest a non-polyadenylated mRNA length of 1373 to 1380 nucleotides, which is consistent with the observed length of 1500 nucleotides for polyadenylated PGK mRNA. A sequence TATATATAAA is found at 145 nucleotides upstream from the translational start. This sequence resembles the TATAAA box that is possibly associated with RNA polymerase II binding. Images PMID:6296791

The growth and dynamics of Ensis directus in the near-shore Dutch coastal zone of the North Sea

NASA Astrophysics Data System (ADS)

Witbaard, Rob; Duineveld, Gerard C. A.; Bergman, Magda J. N.; Witte, Hans IJ.; Groot, Lennart; Rozemeijer, Marcel J. C.

2015-01-01

Here we present data on the wax and wane of a subtidal Ensis directus population which settled in 2009 off the coast of Egmond (North Holland Coast in The Netherlands). Initial densities decreased from a maximum of 700 m- 2 in early 2010 to about 50 m- 2 in June 2013. In this period the average length increased from ~ 4 cm to ~ 12 cm. In 2011-2012 the population was sampled at 3 to 6 week intervals and near bottom environmental conditions were monitored continuously. Samples of animals that were collected were used to follow the change in gonadal mass, tissue glycogen content, tissue weight and shell length. On the basis of these data well defined seasonal cycles were observed. The data indicate that the maturation of gonadal tissue already starts early in the year, initially at the expense of somatic tissue. Main spawning takes place in May. After spawning net somatic tissue growth starts after compensation of losses due to spawning. Somatic growth precedes shell growth which starts at water temperatures exceeding 12-14 °C. Mortality, growth and production are comparable to those found for populations in close-by intertidal areas. As such there is no indication that this offshore population significantly suffers from nearby beach nourishments along the Dutch Coast.

Waardenburg syndrome with extended aganglionosis: report of 3 new cases.

PubMed

Karaca, Irfan; Turk, Erdal; Ortac, Ragip; Kandirici, Aliye

2009-06-01

The Waardenburg-Shah syndrome is an autosomal recessive disease with varied penetration where Hirschsprung's disease and the Waardenburg syndrome are seen together. Although the length of the involved intestinal segment varies in this syndrome, most patients had total colonic aganglionosis with or without small bowel involvement. We present in this study 2 siblings and one first-degree relative for a total of 3 male patients with Waardenburg syndrome and total colonic aganglionosis with or without small bowel involvement, together with their clinical characteristics and treatment methods. The patients who presented with intestinal obstruction findings within the first 48 hours after birth were operated on with 2 patients under elective conditions and 1 as an emergency. The ganglionic segment lengths were 6, 8, and 20 cm, respectively. Aganglionic enterostomy was performed, and the Ziegler operation was used for these patients. The enterostomies started to function on the third postoperative week, and they started to gain weight. However, all died because of sepsis on the 5th to 12th month. Waardenburg-Shah syndrome patients have a higher incidence of total colonic aganglionosis with or without small bowel involvement. The Ziegler operation may be used in patients with inadequate ganglionic bowel length to gain some time for the child to grow and to decrease total parenteral nutrition complications.

Factors affecting inactivation of Moraxell-Acinetobacter cells in an irradiation process. [/sup 137/Cs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Firstenberg-Eden, R.; Rowley, D.B.; Shattuck, G.E.

1980-09-01

The effect of various stages of the irradiation processing of beef on the injury and inactivation of radiation-resistant Moraxella-Acinetobactor cells was studied. Moraxella-Acinetobacter cells were more resistant to heat inactivation and injury when heated in meat with salts (0.75% NaCl and 0.375% sodium tripolyphosphate) than in meat without salts. These salts had no effect on radiation resistance. Heated cells were more sensitive to radiation inactivation and injury than unheated cells. After repair, the cells regained their resistance to both NaCl and irradiation. Freezing and storage at -40/sup 0/C for 14 days had only a slight effect on either unstressed ormore » heat-stressed cells.« less

Thermal Inactivation as a Means of Inhibiting the Serum-Associated Deamination of 9-β-d-Arabinofuranosyladenine in Tissue Culture Media

PubMed Central

Schwartz, Pauline M.; Shipman, Charles; Carlson, Roger H.; Drach, John C.

1974-01-01

9-β-d-Arabinofuranosyladenine (ara-A) was deaminated to 9-β-d-arabinofuranosylhypoxanthine by adenosine deaminase present in fetal bovine serum, newborn calf serum, and calf serum used to supplement tissue culture media. Heating newborn calf serum or calf serum for 12 h at 56 C completely eliminated the enzymatic deamination of ara-A. The deaminase activity associated with fetal bovine serum was more refractory to heating, requiring 24 h for complete inactivation. The nutritive value of heat-inactivated calf serum did not differ significantly from that of unheated serum based on considerations of population doubling times, deoxyribonucleic acid synthesis, and relative cloning efficiencies of KB cells. PMID:4840442

Sensitization by heat treatment of Escherichia coli K-12 cells to hydrophobic antibacterial compounds.

PubMed Central

Tsuchido, T; Takano, M

1988-01-01

The sensitivities of intact and heat-injured cells of Escherichia coli K-12 to several antibacterial compounds were measured by the prolongation of growth delay. Cells exposed to sublethal heat became more sensitive to various hydrophobic compounds, such as medium-chain fatty acids, alkyl esters of p-hydroxybenzoic acid, and some kinds of antibiotics or dyes, than unheated cells; but there was a smaller or no increase in sensitivity to short-chain fatty acids, chloramphenicol, and vancomycin. The destruction by heat of a permeability barrier of the outer membrane may have sensitized the cells to hydrophobic compounds. The sensitization was much lower for a strain defective in lipopolysaccharide, which is important as a barrier against hydrophobic compounds. PMID:3075437

Experimental perfect-gas study of expansion-tube flow characteristics

NASA Technical Reports Server (NTRS)

Shinn, J. L.; Miller, C. G., III

1978-01-01

Results of an experimental investigation of expansion tube flow characteristics performed with helium test gas and acceleration gas are presented. The use of helium, eliminates complex real gas chemistry in the comparison of measured and predicted flow quantities. The driver gas was unheated helium at a nominal pressure of 33 MN sq m. The quiescent test gas pressure and quiescent acceleration gas pressure were varied from 0.7 to 50 kN/sq m and from 2.5 to 53 N/sq m, respectively. The effects of tube-wall boundary layer growth and finite secondary diaphragm opening time were examined through the variation of the quiescent gas pressures and secondary diaphragm thickness. Optimum operating conditions for helium test gas were also defined.

Description and initial operating performance of the Langley 6-inch expansion tube using heated helium driver gas

NASA Technical Reports Server (NTRS)

Moore, J. A.

1975-01-01

A general description of the Langley 6-inch expansion tube is presented along with discussion of the basic components, internal resistance heater, arc-discharge assemblies, instrumentation, and operating procedure. Preliminary results using unheated and resistance-heated helium as the driver gas are presented. The driver-gas pressure ranged from approximately 17 to 59 MPa and its temperature ranged from 300 to 510 K. Interface velocities of approximately 3.8 to 6.7 km/sec were generated between the test gas and the acceleration gas using air as the test gas and helium as the acceleration gas. Test flow quality and comparison of measured and predicted expansion-tube flow quantities are discussed.

Reflectance of evaporated rhenium and tungsten films in the vacuum ultraviolet from 300 to 2000 A.

NASA Technical Reports Server (NTRS)

Cox, J. T.; Hass, G.; Ramsey, J. B.; Hunter, W. R.

1972-01-01

Discussion of the dependence of the reflectance of Re and W on the substrate temperature during deposition, film thickness, and aging during exposure to air. Re and W of 99.99% purity were evaporated with a 6-kW fine-focused electron gun and deposited on glass and fused quartz plates of various temperatures ranging from 40 to 500 C. With Re, films of highest reflectance were obtained by evaporation onto unheated substrates, whereas with W, heating of the substrate greatly increased the reflectance of the deposited films. For both metals, the reflectance losses during extended exposure to air remained rather small, indicating that the oxide films formed on both film materials at room temperature were very thin.

Orbit Transfer Vehicle (OTV) advanced expander cycle engine point design study, volume 2

NASA Technical Reports Server (NTRS)

1981-01-01

The engine requirements are emphasized and include: high specific impulse within a restricted installed length constraint, long life, multiple starts, different thrust levels, and man-rated reliability. The engine operating characteristics and the major component analytical design are summarized.

Inferring pregnancy episodes and outcomes within a network of observational databases

PubMed Central

Ryan, Patrick; Fife, Daniel; Gifkins, Dina; Knoll, Chris; Friedman, Andrew

2018-01-01

Administrative claims and electronic health records are valuable resources for evaluating pharmaceutical effects during pregnancy. However, direct measures of gestational age are generally not available. Establishing a reliable approach to infer the duration and outcome of a pregnancy could improve pharmacovigilance activities. We developed and applied an algorithm to define pregnancy episodes in four observational databases: three US-based claims databases: Truven MarketScan® Commercial Claims and Encounters (CCAE), Truven MarketScan® Multi-state Medicaid (MDCD), and the Optum ClinFormatics® (Optum) database and one non-US database, the United Kingdom (UK) based Clinical Practice Research Datalink (CPRD). Pregnancy outcomes were classified as live births, stillbirths, abortions and ectopic pregnancies. Start dates were estimated using a derived hierarchy of available pregnancy markers, including records such as last menstrual period and nuchal ultrasound dates. Validation included clinical adjudication of 700 electronic Optum and CPRD pregnancy episode profiles to assess the operating characteristics of the algorithm, and a comparison of the algorithm’s Optum pregnancy start estimates to starts based on dates of assisted conception procedures. Distributions of pregnancy outcome types were similar across all four data sources and pregnancy episode lengths found were as expected for all outcomes, excepting term lengths in episodes that used amenorrhea and urine pregnancy tests for start estimation. Validation survey results found highest agreement between reviewer chosen and algorithm operating characteristics for questions assessing pregnancy status and accuracy of outcome category with 99–100% agreement for Optum and CPRD. Outcome date agreement within seven days in either direction ranged from 95–100%, while start date agreement within seven days in either direction ranged from 90–97%. In Optum validation sensitivity analysis, a total of 73% of algorithm estimated starts for live births were in agreement with fertility procedure estimated starts within two weeks in either direction; ectopic pregnancy 77%, stillbirth 47%, and abortion 36%. An algorithm to infer live birth and ectopic pregnancy episodes and outcomes can be applied to multiple observational databases with acceptable accuracy for further epidemiologic research. Less accuracy was found for start date estimations in stillbirth and abortion outcomes in our sensitivity analysis, which may be expected given the nature of the outcomes. PMID:29389968

Dependence of Ion Dynamics on the Polymer Chain Length in Poly(ethylene oxide)-Based Polymer Electrolytes.

PubMed

Chattoraj, Joyjit; Knappe, Marisa; Heuer, Andreas

2015-06-04

It is known from experiments that in the polymer electrolyte system, which contains poly(ethylene oxide) chains (PEO), lithium-cations (Li(+)), and bis(trifluoromethanesulfonyl)imide-anions (TFSI(-)), the cation and the anion diffusion and the ionic conductivity exhibit a similar chain-length dependence: with increasing chain length, they start dropping steadily, and later, they saturate to constant values. These results are surprising because Li-cations are strongly correlated with the polymer chains, whereas TFSI-anions do not have such bonding. To understand this phenomenon, we perform molecular dynamics simulations of this system for four different polymer chain lengths. The diffusion results obtained from our simulations display excellent agreement with the experimental data. The cation transport model based on the Rouse dynamics can successfully quantify the Li-diffusion results, which correlates Li diffusion with the polymer center-of-mass motion and the polymer segmental motion. The ionic conductivity as a function of the chain length is then estimated based on the chain-length-dependent ion diffusion, which shows a temperature-dependent deviation for short chain lengths. We argue that in the first regime, counterion correlations modify the conductivity, whereas for the long chains, the system behaves as a strong electrolyte.

The Effect of Lengthening Cation Ether Tails on Ionic Liquid Properties

DOE PAGES

Lall-Ramnarine, S.; Rodriguez, C.; Fernandez, R.; ...

2016-08-30

In order to explore the effect of multiple ether functionalities on ionic liquid properties, a series of ten pyrrolidinium ionic liquids and ten imidazolium ionic liquids bearing ether and alkyl side chains of varying lengths (4 to 10 atoms in length) were prepared for this study. Their physical properties, such as viscosity, conductivity and thermal profile were measured and compared. Consistent with earlier literature, a single ether substituent substantially decreases the viscosity of pyrrolidinium and imidazolium ILs compared to their alkyl congeners. Remarkably, as the number of ether units in the pyrrolidinium ILs increases there is hardly any increase inmore » the viscosity, in contrast to alkylpyrrolidinium ILs where the viscosity increases steadily with chain length. Viscosities of imidazolium ether ILs increase with chain length but always remain well below their alkyl congeners. These results provide significant insight on the choice of starting materials for researchers designing ILs for specific applications.« less

Growth strategies and threshold responses to water deficit modulate effects of warming on tree seedlings from forest to alpine

USGS Publications Warehouse

Lazarus, Brynne E.; Castanha, Cristina; Germino, Matthew; Kueppers, Lara M.; Moyes, Andrew B.

2018-01-01

1.Predictions of upslope range shifts for tree species with warming are based on assumptions of moisture stress at lower elevation limits and low temperature stress at high elevation limits. However, recent studies have shown that warming can reduce tree seedling establishment across the entire gradient from subalpine forest to alpine via moisture limitation. Warming effects also vary with species, potentially resulting in community shifts in high elevation forests. 2.We examined the growth and physiology underlying effects of warming on seedling demographic patterns. We evaluated dry mass (DM), root length, allocation above- and belowground, and relative growth rate (RGR) of whole seedlings, and their ability to avoid or endure water stress via water-use efficiency and resisting turgor loss, for Pinus flexilis, Picea engelmannii and Pinus contorta seeded below, at, and above treeline in experimentally warmed, watered, and control plots in the Rocky Mountains, USA. We expected that growth and allocation responses to warming would relate to moisture status and that variation in drought tolerance traits would explain species differences in survival rates. 3.Across treatments and elevations, seedlings of all species had weak turgor-loss resistance, and growth was marginal with negative RGR in the first growth phase (-0.01 to -0.04 g/g/d). Growth was correlated with soil moisture, particularly in the relatively small-seeded P. contorta and P. engelmannii. P. flexilis, known to have the highest survivorship, attained the greatest DM and longest root but was also the slowest growing and most water-use-efficient. This was likely due to its greater reliance on seed reserves. Seedlings developed 15% less total DM, 25% less root DM, and 11% shorter roots in heated compared to unheated plots. Higher temperatures slightly increased DM, root length and RGR where soils were wettest, but more strongly decreased these variables under drier conditions. 4.Synthesis: The surprising heat-inhibition of tree seedling establishment at the cold edge of forests appears to have a physiological basis: newly germinated seedlings have poor moisture stress tolerance, which appears related to marginal initial growth and heavy reliance on seed reserves. Variation in these attributes among tree species at treeline helps explain their different climate responses.

Polymer/fullerene photovoltaic devices: Nanoscale control of the interface by thermally-controlled interdiffusion

NASA Astrophysics Data System (ADS)

Drees, Martin

In this thesis, the interface between the electron donor polymer and the electron acceptor fullerene in organic photovoltaic devices is studied. Starting from a bilayer system of donor and acceptor materials, the proximity of polymer and fullerene throughout the bulk of the devices is improved by inducing an interdiffusion of the two materials by heating the devices in the vicinity of the glass transition temperature of the polymer. In this manner, a concentration gradient of polymer and fullerene throughout the bulk is created. The proximity of a fullerene within 10 nm of any photoexcitation in the polymer ensures that the efficient charge separation occurs. Measurements of the absorption, photoluminescence, and photocurrent spectra as well as I--V characteristics are used to study the interdiffusion and its influence on the efficiency of the photovoltaic devices. In addition, the film morphology is studied on a microscopic level with transmission electron microscopy and with Auger spectroscopy combined with ion beam milling to create a depth profile of the polymer concentration in the film. Initial studies to induce an interdiffusion were done on poly(2-methoxy-5-(2 '-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) as the electron donor polymer and the buckminsterfullerene C60 as the electron acceptor. Interdiffused devices show an order of magnitude photoluminescence quenching with concomitant increase in the photocurrents by an order of magnitude. Variation of the polymer layer thickness shows that the photocurrents increase with decreasing thickness down to 70 nm due to charge transport limitation. The choice of layer thickness in organic photovoltaic devices is critical for optimization of the efficiency. The interdiffusion process is also monitored in situ and a permanent increase in photocurrents is observed during the heat treatment. Transmission electron microscopy (TEM) studies on cross sections of the film reveal that C60 interdiffuses into the MEH-PPV bulk in the form of >10 nm clusters. This clustering of C60 is a result of its tendency to crystallize and the low miscibility of C 60 in MEH-PPV, leading to strong phase separation. To improve the interdiffusion process, the donor polymer is replaced by poly(3-octylthiophene-2,5-diyl) (P3OT), which has a better miscibility with C60. Again, the photocurrents of the interdiffused devices are improved significantly. A monochromatic power conversion efficiency of 1.5% is obtained for illumination of 3.8 mW/cm2 at 470 nm. The polymer concentration in unheated and interdiffused films is studied with Auger spectroscopy in combination with ion beam milling. The concentration profile shows a distinct interface between P3OT and C60 in unheated films and a slow rise of the P3OT concentration throughout a large cross-section of the interdiffused film. TEM studies on P3OT/C60 films show that C60 still has some tendency to form clusters. The results of this thesis demonstrate that thermally-controlled interdiffusion is a viable approach for fabrication of efficient photovoltaic devices through nanoscale control of composition and morphology. These results are also used to draw conclusions about the influence of film morphology on the photovoltaic device efficiency and to identify important issues related to materials choice for the interdiffusion process. Prospective variations in materials choice are suggested to achieve better film morphologies.

77 FR 329 - Flightcrew Member Duty and Rest Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-04

... length of duty day, starting time, workload, and other factors shown by recent research, scientific... the universality of factors that lead to fatigue in most individuals and regulates these factors to... between domestic, supplemental and flag passenger operations because the factors leading to fatigue are...

Effect of Prior Injury on Changes to Biceps Femoris Architecture across an Australian Football League Season.

PubMed

Timmins, Ryan G; Bourne, Matthew N; Hickey, Jack T; Maniar, Nirav; Tofari, Paul J; Williams, Morgan D; Opar, David A

2017-10-01

To assess in-season alterations of biceps femoris long head (BFlh) fascicle length in elite Australian footballers with and without a history of unilateral hamstring strain injury (HSI) in the past 12 months. Thirty elite Australian football players were recruited. Twelve had a history of unilateral HSI. Eighteen had no HSI history. All had their BFlh architecture assessed at approximately monthly intervals, six times across a competitive season. The previously injured limb's BFlh fascicles increased from the start of the season and peaked at week 5. Fascicle length gradually decreased until the end of the season, where they were shortest. The contralateral uninjured limb's fascicles were the longest when assessed at week 5 and showed a reduction in-season where weeks 17 and 23 were shorter than week 1. Control group fascicles were longest at week 5 and reduced in-season. The previously injured limb's BFlh fascicles were shorter than the control group at all weeks and the contralateral uninjured limb at week 5. Compared with the control group, the contralateral uninjured limb had shorter fascicles from weeks 9 to 23. Athletes with a history of HSI end the season with shorter fascicles than they start. Limbs without a history of HSI display similar BFlh fascicle lengths at the end of the season as they begin with. All athletes increase fascicle length at the beginning of the season; however, the extent of the increase differed based on history of HSI. These findings show that a HSI history may influence structural adaptation of the BFlh in-season.

Maternal telomere length inheritance in the king penguin.

PubMed

Reichert, S; Rojas, E R; Zahn, S; Robin, J-P; Criscuolo, F; Massemin, S

2015-01-01

Telomeres are emerging as a biomarker for ageing and survival, and are likely important in shaping life-history trade-offs. In particular, telomere length with which one starts in life has been linked to lifelong survival, suggesting that early telomere dynamics are somehow related to life-history trajectories. This result highlights the importance of determining the extent to which telomere length is inherited, as a crucial factor determining early life telomere length. Given the scarcity of species for which telomere length inheritance has been studied, it is pressing to assess the generality of telomere length inheritance patterns. Further, information on how this pattern changes over the course of growth in individuals living under natural conditions should provide some insight on the extent to which environmental constraints also shape telomere dynamics. To fill this gap partly, we followed telomere inheritance in a population of king penguins (Aptenodytes patagonicus). We tested for paternal and maternal influence on chick initial telomere length (10 days old after hatching), and how these relationships changed with chick age (at 70, 200 and 300 days old). Based on a correlative approach, offspring telomere length was positively associated with maternal telomere length early in life (at 10 days old). However, this relationship was not significant at older ages. These data suggest that telomere length in birds is maternally inherited. Nonetheless, the influence of environmental conditions during growth remained an important factor shaping telomere length, as the maternal link disappeared with chicks' age.

Large Eddy Simulation of Sound Generation by Turbulent Reacting and Nonreacting Shear Flows

NASA Astrophysics Data System (ADS)

Najafi-Yazdi, Alireza

The objective of the present study was to investigate the mechanisms of sound generation by subsonic jets. Large eddy simulations were performed along with bandpass filtering of the flow and sound in order to gain further insight into the pole of coherent structures in subsonic jet noise generation. A sixth-order compact scheme was used for spatial discretization of the fully compressible Navier-Stokes equations. Time integration was performed through the use of the standard fourth-order, explicit Runge-Kutta scheme. An implicit low dispersion, low dissipation Runge-Kutta (ILDDRK) method was developed and implemented for simulations involving sources of stiffness such as flows near solid boundaries, or combustion. A surface integral acoustic analogy formulation, called Formulation 1C, was developed for farfield sound pressure calculations. Formulation 1C was derived based on the convective wave equation in order to take into account the presence of a mean flow. The formulation was derived to be easy to implement as a numerical post-processing tool for CFD codes. Sound radiation from an unheated, Mach 0.9 jet at Reynolds number 400, 000 was considered. The effect of mesh size on the accuracy of the nearfield flow and farfield sound results was studied. It was observed that insufficient grid resolution in the shear layer results in unphysical laminar vortex pairing, and increased sound pressure levels in the farfield. Careful examination of the bandpass filtered pressure field suggested that there are two mechanisms of sound radiation in unheated subsonic jets that can occur in all scales of turbulence. The first mechanism is the stretching and the distortion of coherent vortical structures, especially close to the termination of the potential core. As eddies are bent or stretched, a portion of their kinetic energy is radiated. This mechanism is quadrupolar in nature, and is responsible for strong sound radiation at aft angles. The second sound generation mechanism appears to be associated with the transverse vibration of the shear-layer interface within the ambient quiescent flow, and has dipolar characteristics. This mechanism is believed to be responsible for sound radiation along the sideline directions. Jet noise suppression through the use of microjets was studied. The microjet injection induced secondary instabilities in the shear layer which triggered the transition to turbulence, and suppressed laminar vortex pairing. This in turn resulted in a reduction of OASPL at almost all observer locations. In all cases, the bandpass filtering of the nearfield flow and the associated sound provides revealing details of the sound radiation process. The results suggest that circumferential modes are significant and need to be included in future wavepacket models for jet noise prediction. Numerical simulations of sound radiation from nonpremixed flames were also performed. The simulations featured the solution of the fully compressible Navier-Stokes equations. Therefore, sound generation and radiation were directly captured in the simulations. A thickened flamelet model was proposed for nonpremixed flames. The model yields artificially thickened flames which can be better resolved on the computational grid, while retaining the physically currect values of the total heat released into the flow. Combustion noise has monopolar characteristics for low frequencies. For high frequencies, the sound field is no longer omni-directional. Major sources of sound appear to be located in the jet shear layer within one potential core length from the jet nozzle.

A linear mitochondrial genome of Cyclospora cayetanensis (Eimeriidae, Eucoccidiorida, Coccidiasina, Apicomplexa) suggests the ancestral start position within mitochondrial genomes of eimeriid coccidia.

PubMed

Ogedengbe, Mosun E; Qvarnstrom, Yvonne; da Silva, Alexandre J; Arrowood, Michael J; Barta, John R

2015-05-01

The near complete mitochondrial genome for Cyclospora cayetanensis is 6184 bp in length with three protein-coding genes (Cox1, Cox3, CytB) and numerous lsrDNA and ssrDNA fragments. Gene arrangements were conserved with other coccidia in the Eimeriidae, but the C. cayetanensis mitochondrial genome is not circular-mapping. Terminal transferase tailing and nested PCR completed the 5'-terminus of the genome starting with a 21 bp A/T-only region that forms a potential stem-loop. Regions homologous to the C. cayetanensis mitochondrial genome 5'-terminus are found in all eimeriid mitochondrial genomes available and suggest this may be the ancestral start of eimeriid mitochondrial genomes. Copyright © 2015 Australian Society for Parasitology Inc. All rights reserved.

Mach 4 free-jet tunnel starting experiments for a hypersonic research engine model causing high blockage

NASA Technical Reports Server (NTRS)

Carson, G. T., Jr.; Midden, R. E.

1976-01-01

Tests of a full scale hypersonic research engine (HRE) were conducted in the hypersonic tunnel facility at Mach numbers of 5, 6, and 7. Since the HRE would cause a rather high blockage (48.83 percent of the nozzle area), subscale tests were conducted in various available small wind tunnels prior to the full scale tests to study the effects of model blockage on tunnel starting. The results of the Mach 4 subscale tests which utilized a model system at 0.0952 scale which simulated the HRE in the test section of the tunnel are presented. A satisfactory tunnel starting could not be achieved by varying the free jet length or diffuser size nor by inserting the model into the test stream after tunnel starting. However, the installation of a shroud around the HRE model allowed the tunnel to start with the model preset in the tunnel at a tunnel stagnation pressure to atmospheric exit pressure ratio of 13.4. The simulation of the discharge of instrumentation cooling water and the addition of test hardware at the aft end of the HRE model did not have a significant effect on the tunnel starting.

Properties of an intergenic terminator and start site switch that regulate IMD2 transcription in yeast.

PubMed

Jenks, M Harley; O'Rourke, Thomas W; Reines, Daniel

2008-06-01

The IMD2 gene in Saccharomyces cerevisiae is regulated by intracellular guanine nucleotides. Regulation is exerted through the choice of alternative transcription start sites that results in synthesis of either an unstable short transcript terminating upstream of the start codon or a full-length productive IMD2 mRNA. Start site selection is dictated by the intracellular guanine nucleotide levels. Here we have mapped the polyadenylation sites of the upstream, unstable short transcripts that form a heterogeneous family of RNAs of approximately 200 nucleotides. The switch from the upstream to downstream start sites required the Rpb9 subunit of RNA polymerase II. The enzyme's ability to locate the downstream initiation site decreased exponentially as the start was moved downstream from the TATA box. This suggests that RNA polymerase II's pincer grip is important as it slides on DNA in search of a start site. Exosome degradation of the upstream transcripts was highly dependent upon the distance between the terminator and promoter. Similarly, termination was dependent upon the Sen1 helicase when close to the promoter. These findings extend the emerging concept that distinct modes of termination by RNA polymerase II exist and that the distance of the terminator from the promoter, as well as its sequence, is important for the pathway chosen.

Conditions for Learning: Part 3

ERIC Educational Resources Information Center

Andrews, Paul; Sayers, Judy

2006-01-01

In this article, the authors compare texts, times, technologies, and trails in mathematics lessons in five European countries (Flanders, England, Finland, Hungary and Spain). They start by discussing the provision and use of textbooks. After this they discuss lesson lengths and their impact on learners. They consider the extent of technology…

Concentrating Solar Power Projects - Kimberlina Solar Thermal Power Plant |

Science.gov Websites

MW Gross: 5.0 MW Status: Currently Non-Operational Start Year: 2008 Do you have more information , corrections, or comments? Background Technology: Linear Fresnel reflector Status: Currently Non-Operational Manufacturer: Ausra Receiver Manufacturer : Ausra Receiver Type: Non-evacuated Receiver Length: 385 m Heat

Influence of the Dirac-Hartree-Fock starting potential on the parity-nonconserving electric-dipole-transition amplitudes in cesium and thallium

NASA Technical Reports Server (NTRS)

Perger, W. F.; Das, B. P.

1987-01-01

The parity-nonconserving electric-dipole-transition amplitudes for the 6s1/2-7s1/2 transition in cesium and the 6p1/2-7p1/2 transition in thallium have been calculated by the Dirac-Hartree-Fock method. The effects of using different Dirac-Hartree-Fock atomic core potentials are examined and the transition amplitudes for both the length and velocity gauges are given. It is found that the parity-nonconserving transition amplitudes exhibit a greater dependence on the starting potential for thallium than for cesium.

Rapid Clozapine Titration in Patients with Treatment Refractory Schizophrenia.

PubMed

Poyraz, Cana Aksoy; Özdemir, Armağan; Sağlam, Nazife Gamze Usta; Turan, Şenol; Poyraz, Burç Çağrı; Tomruk, Nesrin; Duran, Alaattin

2016-06-01

The aim of this study is to evaluate the safety and effectiveness of rapid clozapine titration in patients with schizophrenia in hospital settings. We conducted a retrospective two-center cohort study to compare the safety and effectiveness of clozapine with different titration rates in treatment-refractory patients with schizophrenia. In the first center, clozapine was started at 25-50 mg followed by 50-100 mg as needed every 6 h on day 1, followed by increases of 50-100 mg/day. In the second center, titration was slower; clozapine initiated with 12.5-50 mg on day 1 followed by increases of 25-50 mg/day. The number of days between starting of clozapine until discharge was shorter in the rapid titration group (22.4 ± 8.72 vs 27.0 ± 10.5, p = 0.1). Number of days of total hospital stay were significantly shorter in the rapid titration group (29.6 ± 10.6 vs 41.2 ± 14.8, p = 0.002). Hypotension was more common in the rapid titration group and one patient had suspected myocarditis. Rapid clozapine titration appeared safe and effective. The length of stay following initiation of clozapine was shorter in the rapid-titration group, although this was not statistically significant. However starting clozapine earlier together with rapid titration has significantly shortened the length of hospital stay in patients with treatment refractory schizophrenia.

ATIC Experiment: Elemental Spectra from the Flight in 2000

NASA Technical Reports Server (NTRS)

Ahn, H. S.; Adams, J. H.; Bashindzhagyan, G.; Batkov, K. E.; Chang, J.; Christl, M.; Fazely, A. R.; Ganel, O.; Gunasingha, R. M.; Guzik, T. G.

2003-01-01

The Advanced Thin Ionization Calorimeter (ATIC) had successful Long Duration Balloon flights from McMurdo, Antarctica in both 2000 and 2002. The instrument consists of a silicon matrix charge detector, a 0.75 nuclear interaction length graphite target, 3 scintillator strip hodoscopes, and an 18 radiation length thick BGO calorimeter to measure the cosmic ray composition and energy spectra from approximately 30 GeV to near 100 TeV. In this paper, we present preliminary results from the first flight, which was a test flight that lasted for 16 days, starting on 12/28/00.

Paraquat and pine trees in east Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schnell, R.L.; Toennisson, R.L.

The Tennessee Valley Authority started a series of 8% Paraquat tests in east Tennessee on loblolly, shortleaf, and Virginia pines in the spring of 1974. In addition to species, we are also testing the effects of season of treatment application and the length of time between the completed treatment and the harvest cut. Wood samples are being analyzed by the Botany Department at the University of Tennessee in Knoxville. All three species have shown increased oleoresin production. Season of treatment did not have a significant effect on enhancement nor did length of time between treatment and harvest.

Cystic Fibrosis Transmembrane Conductance Regulator (ABCC7) Structure

PubMed Central

Hunt, John F.; Wang, Chi; Ford, Robert C.

2013-01-01

Structural studies of the cystic fibrosis transmembrane conductance regulator (CFTR) are reviewed. Like many membrane proteins, full-length CFTR has proven to be difficult to express and purify, hence much of the structural data available is for the more tractable, independently expressed soluble domains. Therefore, this chapter covers structural data for individual CFTR domains in addition to the sparser data available for the full-length protein. To set the context for these studies, we will start by reviewing structural information on model proteins from the ATP-binding cassette (ABC) transporter superfamily, to which CFTR belongs. PMID:23378596

Accuracy of two root canal length measurement devices integrated into rotary endodontic motors when removing gutta-percha from root-filled teeth.

PubMed

Uzun, O; Topuz, O; Tinaz, C; Nekoofar, M H; Dummer, P M H

2008-09-01

To evaluate ex vivo the accuracy of the integrated electronic root canal length measurement devices within TCM Endo V and Tri Auto ZX motors whilst removing gutta-percha and sealer from filled root canals. Forty freshly extracted maxillary and mandibular incisor teeth with mature apices were selected. Following access cavity preparation, the length of the root canals were measured visually 0.5 mm short of the major foramen (TL). The canals were prepared using the HERO 642 system and then filled with gutta-percha and AH26 sealer using a lateral compaction technique. After 7 days the coronal temporary filling was removed and the roots mounted in an alginate experimental model. The roots were then randomly divided in two groups. The access cavities were filled with chloroform to soften the gutta-percha and allow its penetration using the Tri Auto ZX and the TCM Endo V devices in groups 1 and 2, respectively. The 'automatic apical reverse function' (ARL) of both devices was set to start at the 0.5 setting and the rotary instrument inserted inside the root canal until a beeping sound was heard and the rotation of the file stopped automatically. Once the auto reverse function had been initiated, the foot pedal of the motor was inactivated and the rubber stop placed against the reference point. The distance between the file tip and rubber stop was measured using a digital calliper to 0.01 mm accuracy (ARL). Then, a size 20, 0.02 taper instrument was attached to each device and inserted into the root canals without rotary motion until the integrated ERCLMDs positioned the instrument tips at the 0.5 setting as suggested by the devices. This length was again measured using a digital calliper (EL). The Mann-Whitney U-test was used to investigate statistical differences between the true canal length and those indicated by the two devices when used in 'automatic ARL and when inserted passively (EL). In the presence of gutta-percha, sealer and chloroform, the auto-reverse function for the Tri Auto ZX and TCM Endo V, set to start at 0.5 level, was initiated beyond the foramen in 60% and 95% of the samples, respectively during active (rotary) penetration of the instruments. There was a statistically significant difference between the devices for the mean discrepancies between the length at which the auto reverse function was initiated and the true length (P < 0.001). Electronic detection of the apical terminus when the instruments were introduced passively (not rotating) was beyond the foramen in 20% and 37% of cases in the Tri Auto ZX group and the TCM Endo V group, respectively. There was a statistically significant difference between the devices for the mean discrepancies between the electronically determined (passive) length and true length (P < 0.01). The auto reverse function of the Tri Auto ZX and TCM Endo V devices, set to start at 0.5 level, were initiated beyond the foramen in the majority of root-filled teeth during active (rotating) penetration of root filling material. Thus, this automatic function must be used with caution when removing gutta-percha root fillings. There were significant differences between the accuracy of measurements in active (rotating) and passive (not-rotating) modes; both devices were more accurate when used in passive mode. However, the Tri Auto ZX was significantly more accurate in a greater proportion of cases.

Topoclimate effects on growing season length and montane conifer growth in complex terrain

DOE PAGES

Barnard, David M.; Barnard, H. R.; Molotch, N. P.

2017-05-23

Spatial variability in the topoclimate-driven linkage between forest phenology and tree growth in complex terrain is poorly understood, limiting our understanding of how ecosystems function as a whole. To characterize the influence of topoclimate on phenology and growth, we determined the start, end, and length of the growing season (GS start, GS end, and GSL, respectively) using the correlation between transpiration and evaporative demand, measured with sapflow. We then compared these metrics with stem relative basal area increment (relative BAI) at seven sites among elevation and aspects in a Colorado montane forest. As elevation increased, we found shorter GSL (–50more » d km –1) due to later GSstart (40 d km –1) and earlier GSend (–10 d km –1). North-facing sites had a 21 d shorter GSL than south-facing sites at similar elevations (i.e. equal to 200 m elevation difference on a given aspect). Growing season length was positively correlated with relative BAI, explaining 83% of the variance. This study shows that topography exerts strong environmental controls on GSL and thus forest growth. Here, given the climate-related dependencies of these controls, the results presented here have important implications for ecosystem responses to changes in climate and highlight the need for improved phenology representation in complex terrain.« less

Topoclimate effects on growing season length and montane conifer growth in complex terrain

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnard, David M.; Barnard, H. R.; Molotch, N. P.

Spatial variability in the topoclimate-driven linkage between forest phenology and tree growth in complex terrain is poorly understood, limiting our understanding of how ecosystems function as a whole. To characterize the influence of topoclimate on phenology and growth, we determined the start, end, and length of the growing season (GS start, GS end, and GSL, respectively) using the correlation between transpiration and evaporative demand, measured with sapflow. We then compared these metrics with stem relative basal area increment (relative BAI) at seven sites among elevation and aspects in a Colorado montane forest. As elevation increased, we found shorter GSL (–50more » d km –1) due to later GSstart (40 d km –1) and earlier GSend (–10 d km –1). North-facing sites had a 21 d shorter GSL than south-facing sites at similar elevations (i.e. equal to 200 m elevation difference on a given aspect). Growing season length was positively correlated with relative BAI, explaining 83% of the variance. This study shows that topography exerts strong environmental controls on GSL and thus forest growth. Here, given the climate-related dependencies of these controls, the results presented here have important implications for ecosystem responses to changes in climate and highlight the need for improved phenology representation in complex terrain.« less

Clearance of a Mucus Plug

NASA Astrophysics Data System (ADS)

Bian, Shiyao; Zheng, Ying; Grotberg, James B.

2008-11-01

Mucus plugging may occur in pulmonary airways in asthma, chronic obstructive pulmonary disease (COPD) and cystic fibrosis. How to clear the mucus plug is essential and of fundamental importance. Mucus is known to have a yield stress and a mucus plug behaves like a solid plug when the applied stresses are below its yield stress τy. When the local stresses reaches τy, the plug starts to move and can be cleared out of the lung. It is then of great importance to examine how the mucus plug deforms and what is the minimum pressure required to initiate its movement. The present study used the finite element method (FEM) to study the stress distribution and deformation of a solid mucus plug under different pressure loads using ANSYS software. The maximum shear stress is found to occur near the rear transition region of the plug, which can lead to local yielding and flow. The critical pressure increases linearly with the plug length and asymptotes when the plug length is larger than the half channel width. Experimentally a mucus simulant is used to study the process of plug deformation and critical pressure difference required for the plug to propagate. Consistently, the fracture is observed to start at the rear transition region where the plug core connects the films. However, the critical pressure is observed to be dependent on not only the plug length but also the interfacial shape.

Noise Source Location and Flow Field Measurements on Supersonic Jets and Implications Regarding Broadband Shock Noise

NASA Technical Reports Server (NTRS)

Podboy, Gary G.; Wernet, Mark P.; Clem, Michelle M.; Fagan, Amy F.

2017-01-01

An experiment was conducted in an effort to obtain data that would provide a better understanding of the origins of broadband shock noise (BBSN). Phased array noise source location and two types of flow field data (background oriented schlieren and particle image velocimetry) were acquired on unheated, single-stream jets. Results are presented for one subsonic and four supersonic operating conditions. These data show that BBSN is created primarily in the downstream portion of the shock train with peak BBSN production occurring near where the average size of the turbulent structures is equal to the shockcell spacing. These data tend to validate theories that BBSN is created by turbulent structures that are as large or larger than the shock spacing.

Thermal Buckling Analysis of Rectangular Panels Subjected to Humped Temperature Profile Heating

NASA Technical Reports Server (NTRS)

Ko, William I.

2004-01-01

This research investigates thermal buckling characteristics of rectangular panels subjected to different types of humped temperature profile heating. Minimum potential energy and finite-element methods are used to calculate the panel buckling temperatures. The two methods give fairly close thermal buckling solutions. 'Buckling temperature magnification factor of the first kind, eta' is established for the fixed panel edges to scale up the buckling solution of uniform temperature loading case to give the buckling solution of the humped temperature profile loading cases. Also, 'buckling temperature magnification factor of the second kind, xi' is established for the free panel edges to scale up the buckling solution of humped temperature profile loading cases with unheated boundary heat sinks to give the buckling solutions when the boundary heat sinks are heated up.

The temperature of unheated bodies in a high-speed gas stream

NASA Technical Reports Server (NTRS)

Eckert, E; Weise, W

1941-01-01

The present report deals with temperature measurements on cylinders of 0.2 to 3 millimeters diameter in longitudinal and transverse air flow at speeds of 100 to 300 meters per second. Within the explored test range, that is, the probable laminar boundary layer region, the temperature of the cylinders in axial flow is practically independent of the speed and in good agreement with Pohlhausen's theoretical values; Whereas, in transverse flow, cylinders of certain diameter manifest a close relationship with speed, the ratio of the temperature above the air of the body to the adiabatic stagnation temperature decreases with rising speed and then rises again from a Mach number of 0.6. The importance of this "specific temperature" of the body for heat-transfer studies at high speed is discussed.

CAA for Jet Noise Physics

NASA Technical Reports Server (NTRS)

Mankbadi, Reda

2001-01-01

Dr. Mankbadi summarized recent CAA results. Examples of the effect of various boundary condition schemes on the computed acoustic field, for a point source in a uniform flow, were shown. Solutions showing the impact of inflow excitations on the result were also shown. Results from a large eddy simulation, using a fourth-order MacCormack scheme with a Smagorinsky sub-grid turbulence model, were shown for a Mach 2.1 unheated jet. The results showed that the results were free from spurious modes. Results were shown for a Mach 1.4 jet using LES in the near field and the Kirchhoff method for the far field. Predicted flow field characteristics were shown to be in good agreement with data and predicted far field directivities were shown to be in qualitative agree with experimental measurements.

CAA for Jet Noise Physics: Issues and Recent Progress

NASA Technical Reports Server (NTRS)

Mankbadi, Reda

2001-01-01

Dr. Mankbadi summarized recent CAA results. Examples of the effect of various boundary condition schemes on the computed acoustic field, for a point source in a uniform flow, were shown. Solutions showing the impact of inflow excitations on the result were also shown. Results from a large eddy simulation, using a fourth-order MacCormack scheme with a Smagorinsky sub-grid turbulence model, were shown for a Mach 2.1 unheated jet. The results showed that the results were free from spurious modes. Results were shown for a Mach 1.4 jet using LES in the near field and the Kirchhoff method for the far field. Predicted flow field characteristics were shown to be in good agreement with data and predicted far field directivities were shown to be in qualitative agree with experimental measurements.

Internal Performance of Several Divergent-Shroud Ejector Nozzles with High Divergence Angles

NASA Technical Reports Server (NTRS)

Trout, Arthur M.; Papell, S. Stephen; Povolny, John H.

1957-01-01

Nine divergent-shroud ejector configurations were investigated to determine the effect of shroud divergence angle on ejector internal performance. Unheated dry air was used for both the primary and secondary flows. The decrease in the design-point thrust coefficient with increasing flow divergence angle (angle measured from primary exit to shroud exit) followed very closely a simple relation involving the cosine of the angle. This indicates that design-point thrust performance for divergent-shroud ejectors can be predicted with reasonable accuracy within the range investigated. The decrease in design-point thrust coefficient due to increasing the flow divergence engle from 120deg to 30deg (half-singles) was approximately 6 percent. Ejector air-handling characteristics and the primary-nozzle flow coefficient were not significantly affected by change in shroud divergence angle.

Determination of delta-9-tetrahydrocannabinol content of cannabis seizures in Egypt.

PubMed

Souleman, Ahmed M A; Gaafar, Alaa El-Din M; Abdel-Salam, Omar M; ElShebiney, Shaimaa A

2017-03-01

To determine the delta-9-tetrahydrocannabinol (THC) content of cannabis seizures in Egypt. Unheated and heated extracts of cannabis seizures were prepared from the dried flowering tops and leaves (marijuana) or from the resin (hashish) and subjected to analysis using high performance liquid chromatography (HPLC). The heated resin extract had the peak of THC in a relative ratio of 31.34%, while extracting the resin directly without heating contained only 18.34% of THC. On the other hand, marijuana showed minimum percentage of THC at 11.188% on heating and 9.55% without heating. These results indicate the high potency of the abused cannabis plant in the illicit Egyptian market. Copyright © 2017 Hainan Medical University. Production and hosting by Elsevier B.V. All rights reserved.

Airborne grass (Poaceae) pollen in southern Spain. Results of a 10-year study (1987-96).

PubMed

González Minero, F J; Candau, P; Tomás, C; Morales, J

1998-03-01

This work reports an exhaustive study of the aerobiology of the Gramineae in Seville, Spain, which is typical of coastal Mediterranean areas. Sampling was done with a Cour trap installed on the roof terrace of the School of Pharmacy, Seville, from 1987 to 1996, both inclusive. The climatic pattern of that period was characterized by two exceptionally wet years (1989 and 1996), between which were 5 consecutive years of drought (1990-5). This typically Mediterranean climate affects grass aerobiology. The annual amounts of total grass pollen are low, never exceeding 2500 grains/m3. The start, length, and intensity of the pollen season are significantly correlated with preseasonal meteorologic factors (precipitation and temperature), but intraseasonal meteorologic conditions have no effect on the three variables. The relationships are stated by three equations that, while further years of observations are anticipated, can be considered models to forecast the characteristics of the pollen season: the starting date depends on the mean temperatures of January and February, and the length and intensity of the season depend on the rainfall between the beginning of January and the starting date of the season. For the study period, the weekly concentrations (pollen curves) throughout the year showed no typical pattern of variation over the years, so that it was impossible to make mid- and long-term forecasts of the variation in weekly concentration. The most noteworthy aspects of grass pollen curves are a long pollen season, which starts in February or March and lasts until September or October; peaks of higher concentration (> 100 grains/m3) in May and June, associated with increases in temperature and absence of precipitation; and other peaks in the summer months that may be as high as the spring peaks.

2 CFR 2424.1125 - How does a limited denial of participation start?

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agreements DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT NONPROCUREMENT DEBARMENT AND SUSPENSION Limited Denial... the sanction; (c) Of the potential effect of the sanction, including the length of the sanction and the HUD program(s) and geographic area affected by the sanction; (d) Of the right to request, in...

Quantum-Classical Connection for Hydrogen Atom-Like Systems

ERIC Educational Resources Information Center

Syam, Debapriyo; Roy, Arup

2011-01-01

The Bohr-Sommerfeld quantum theory specifies the rules of quantization for circular and elliptical orbits for a one-electron hydrogen atom-like system. This article illustrates how a formula connecting the principal quantum number "n" and the length of the major axis of an elliptical orbit may be arrived at starting from the quantum…

Don't be thru-hiking; start Uhikingsm

Treesearch

Kirk D. Sinclair

2001-01-01

Our National Scenic Trails help to protect wilderness and rural culture, while at the same time providing benefits to outdoor recreationists. Thru-hiking is an outdoor recreational pursuit that involves hiking "through" the entire length of a National Scenic Trail. A support network exists for hopeful sojourners desiring to thru-hike that captivates their...

Designing a Study Abroad Course in Chemistry: Information from Three Different Courses to Europe

ERIC Educational Resources Information Center

Marine, Susan Sonchik

2013-01-01

Guidelines for planning a study abroad course in chemistry start with defining the course objectives and outcomes. These, in turn, guide the choice of course content and format, location, length of travel, activities, and assessment. Budgetary issues include transportation, lodging, admission fees, activities, docents and guides (including audio…

Comparative urodynamic studies of continent and stress incontinent women in pregnancy and in the puerperium.

PubMed

Iosif, S; Ulmsten, U

1981-07-15

Twelve pregnant women were examined by urethral pressure profile measurement and simultaneous urethrocystometry early in pregnancy (weeks 12 to 16), in the thirty-eighth week, and 5 to 7 days after delivery. All patients reported symptoms of stress incontinence starting at an early 5 to 7 days after delivery. All patients reported symptoms of stress incontinence starting at an early gestational age, it was found that that the stress incontinent women, compared to 14 continent, healthy women from whom measurements were obtained earlier, had shorter urethral lengths. Furthermore, no increase in urethral length during pregnancy was registered among the stress incontinent women, whereas such an increase did occur in the continent women. In contrast to the continent women, the incontinent patients had a low urethral closure pressure at rest and this pressure did not appear to increase sufficiently to compensate for the progressive increase in bladder pressure during pregnancy. As a result the urethral closure pressure in the stress incontinent women, therefore, decreased more and more during stress situations as pregnancy progressed, resulting in an increased leakage of urine.

Repeated pulse intramuscular injection of pralidoxime chloride in severe acute organophosphorus pesticide poisoning.

PubMed

Tang, Xue; Wang, Ruilan; Xie, Hui; Hu, Jiachang; Zhao, Wenbiao

2013-06-01

This study aimed to clarify the efficacy of 2 therapies for patients with severe acute organophosphorus pesticide poisoning, including atropine adverse effects, the length of intensive care unit (ICU) stay, complications, and mortality. A retrospective cohort study of 152 cases collected from May 2008 to November 2012 at 2 urban university hospitals was conducted. Patients admitted to the hospital for organophosphate poisoning were divided into 2 groups with different therapeutic regimens: group A was administered a repeated pulse intramuscular injection of pralidoxime chloride, and group B received the same initial dosage of atropine and pralidoxime chloride, but pralidoxime chloride intravenous therapy was administered for only 3 days, regardless of the length of atropine therapy. Subsequently, atropine adverse effects, length of ICU stay, complications, and mortality were statistically analyzed and compared between the 2 groups. The total dose of atropine was 57.40 ± 15.14 mg in group A and 308.26 ± 139.16 mg in group B; group A received less atropine than did group B (P = .001). The length of ICU stay in group A was reduced (P = .025), and group A had fewer atropine adverse effects (P = .002). However, there was no significant difference in the mortality or complication rate between the 2 groups (P > .05). In patients with severe poisoning, group A used less atropine, had fewer atropine adverse effects, and had a shorter ICU stay. We suggest that therapy should be started as early as possible using a sufficient amount of pralidoxime chloride started intramuscularly in combination with atropine and that the drugs should not be prematurely discontinued. Copyright © 2013 Elsevier Inc. All rights reserved.

Clinical factors associated with readmission for postpartum hypertension in women with pregnancy-related hypertension: a nested case control study.

PubMed

Hirshberg, A; Levine, L D; Srinivas, S K

2016-05-01

To evaluate the association between mode of delivery and length of labor on readmission for postpartum hypertension in women with pregnancy-related hypertension. Nested case control study within a cohort of 99 women with pregnancy-related hypertension who delivered at our institution between 2005 and 2009. Data were abstracted for clinical and labor information. Mode of delivery and length of labor were compared between women with previously diagnosed pregnancy-related hypertension readmitted within 4 weeks post partum (25 cases) and those not readmitted (74 controls). Categorical and continuous variables were compared using χ(2) and T-tests, respectively. Multivariable logistic regression controlled for confounders. Hypertension readmission was not associated with mode of delivery (cases: 10(40%) spontaneous vaginal delivery, 15(60%) cesarean delivery; controls: 38(51%) spontaneous vaginal delivery, 36(49%) cesarean delivery, P=0.33). Length of labor appeared longer in cases, with a trend toward significance (median: 15.5 [7,28] h vs 10.75 [5.8,15.9] h, P=0.12) and was significantly associated with readmission after controlling for delivery mode, induction and parity (adjusted odds ratio=1.06 [1 to 1.12], P=0.048). Readmitted patients were less likely to have initially been started on antihypertensive medications after controlling for age, race and chronic hypertension (adjusted odds ratio=0.23 [0.06 to 0.88], P=0.03). Postpartum readmission for hypertension in women with known pregnancy-related hypertension is not associated with mode of delivery, appears increased in those with longer length of labor and decreased in those initially started on antihypertensive medications. This provides targets for future research to continue to improve transitions of care and reduce preventable readmissions.

Clinical factors associated with readmission for postpartum hypertension in women with pregnancy-related hypertension: a nested case control study

PubMed Central

Hirshberg, A; Levine, LD; Srinivas, SK

2017-01-01

Objective To evaluate the association between mode of delivery and length of labor on readmission for postpartum hypertension in women with pregnancy-related hypertension. Study Design Nested case control study within a cohort of 99 women with pregnancy-related hypertension who delivered at our institution between 2005 and 2009. Data were abstracted for clinical and labor information. Mode of delivery and length of labor were compared between women with previously diagnosed pregnancy-related hypertension readmitted within 4 weeks post partum (25 cases) and those not readmitted (74 controls). Categorical and continuous variables were compared using χ2 and T-tests, respectively. Multivariable logistic regression controlled for confounders. Result Hypertension readmission was not associated with mode of delivery (cases: 10(40%) spontaneous vaginal delivery, 15(60%) cesarean delivery; controls: 38(51%) spontaneous vaginal delivery, 36(49%) cesarean delivery, P=0.33). Length of labor appeared longer in cases, with a trend toward significance (median: 15.5 [7,28] h vs 10.75 [5.8,15.9] h, P=0.12) and was significantly associated with readmission after controlling for delivery mode, induction and parity (adjusted odds ratio = 1.06 [1 to 1.12], P = 0.048). Readmitted patients were less likely to have initially been started on antihypertensive medications after controlling for age, race and chronic hypertension (adjusted odds ratio = 0.23 [0.06 to 0.88], P=0.03). Conclusion Postpartum readmission for hypertension in women with known pregnancy-related hypertension is not associated with mode of delivery, appears increased in those with longer length of labor and decreased in those initially started on antihypertensive medications. This provides targets for future research to continue to improve transitions of care and reduce preventable readmissions. PMID:26765549

Sequential addition of short DNA oligos in DNA-polymerase-based synthesis reactions

DOEpatents

Gardner, Shea N [San Leandro, CA; Mariella, Jr., Raymond P.; Christian, Allen T [Tracy, CA; Young, Jennifer A [Berkeley, CA; Clague, David S [Livermore, CA

2011-01-18

A method of fabricating a DNA molecule of user-defined sequence. The method comprises the steps of preselecting a multiplicity of DNA sequence segments that will comprise the DNA molecule of user-defined sequence, separating the DNA sequence segments temporally, and combining the multiplicity of DNA sequence segments with at least one polymerase enzyme wherein the multiplicity of DNA sequence segments join to produce the DNA molecule of user-defined sequence. Sequence segments may be of length n, where n is an even or odd integer. In one embodiment the length of desired hybridizing overlap is specified by the user and the sequences and the protocol for combining them are guided by computational (bioinformatics) predictions. In one embodiment sequence segments are combined from multiple reading frames to span the same region of a sequence, so that multiple desired hybridizations may occur with different overlap lengths. In one embodiment starting sequence fragments are of different lengths, n, n+1, n+2, etc.

Bias sputtered NbN and superconducting nanowire devices

NASA Astrophysics Data System (ADS)

Dane, Andrew E.; McCaughan, Adam N.; Zhu, Di; Zhao, Qingyuan; Kim, Chung-Soo; Calandri, Niccolo; Agarwal, Akshay; Bellei, Francesco; Berggren, Karl K.

2017-09-01

Superconducting nanowire single photon detectors (SNSPDs) promise to combine near-unity quantum efficiency with >100 megacounts per second rates, picosecond timing jitter, and sensitivity ranging from x-ray to mid-infrared wavelengths. However, this promise is not yet fulfilled, as superior performance in all metrics is yet to be combined into one device. The highest single-pixel detection efficiency and the widest bias windows for saturated quantum efficiency have been achieved in SNSPDs based on amorphous materials, while the lowest timing jitter and highest counting rates were demonstrated in devices made from polycrystalline materials. Broadly speaking, the amorphous superconductors that have been used to make SNSPDs have higher resistivities and lower critical temperature (Tc) values than typical polycrystalline materials. Here, we demonstrate a method of preparing niobium nitride (NbN) that has lower-than-typical superconducting transition temperature and higher-than-typical resistivity. As we will show, NbN deposited onto unheated SiO2 has a low Tc and high resistivity but is too rough for fabricating unconstricted nanowires, and Tc is too low to yield SNSPDs that can operate well at liquid helium temperatures. By adding a 50 W RF bias to the substrate holder during sputtering, the Tc of the unheated NbN films was increased by up to 73%, and the roughness was substantially reduced. After optimizing the deposition for nitrogen flow rates, we obtained 5 nm thick NbN films with a Tc of 7.8 K and a resistivity of 253 μΩ cm. We used this bias sputtered room temperature NbN to fabricate SNSPDs. Measurements were performed at 2.5 K using 1550 nm light. Photon count rates appeared to saturate at bias currents approaching the critical current, indicating that the device's quantum efficiency was approaching unity. We measured a single-ended timing jitter of 38 ps. The optical coupling to these devices was not optimized; however, integration with front-side optical structures to improve absorption should be straightforward. This material preparation was further used to fabricate nanocryotrons and a large-area imager device, reported elsewhere. The simplicity of the preparation and promising device performance should enable future high-performance devices.

Comparison of the Cerebrospinal Fluid (CSF) Toluidine Red Unheated Serum Test and the CSF Rapid Plasma Reagin Test with the CSF Venereal Disease Research Laboratory Test for Diagnosis of Neurosyphilis among HIV-Negative Syphilis Patients in China

PubMed Central

Zhu, Lin; Gu, Xin; Peng, Rui-Rui; Wang, Cuini; Gao, Zixiao; Gao, Ying; Shi, Mei; Guan, Zhifang; Seña, Arlene C.

2014-01-01

In this study, we aimed to investigate the performance of nontreponemal antibody tests in cerebrospinal fluid (CSF) specimens from syphilis patients. From September 2009 to September 2012, CSF specimens were collected at the Shanghai Skin Disease Hospital in Shanghai, China, from 1,132 syphilis patients without HIV infection, including 154 with symptomatic and 56 with asymptomatic neurosyphilis. All of the CSF specimens underwent testing with a rapid plasma reagin (RPR) test, an RPR-V (commercial RPR antigen diluted 1:2 in 10% saline) test, the toluidine red unheated serum test (TRUST), and the Venereal Disease Research Laboratory (VDRL) test. Specificities, sensitivities, positive predictive values (PPVs), negative predictive values (NPVs), and kappa values were calculated to determine the performances of the tests. We compared results of the CSF-VDRL, CSF-RPR, CSF-RPR-V, and CSF-TRUST among patients with symptomatic and asymptomatic neurosyphilis who had reactive CSF-Treponema pallidum particle agglutination (TPPA) test results. Overall, the CSF-VDRL test was reactive in 261 patients (23.1%). There were no cases in which the CSF-VDRL was nonreactive and CSF-RPR, CSF-RPR-V, or CSF-TRUST was reactive. Agreement between the results of CSF-TRUST and CSF-RPR was almost perfect (κ = 0.861), with substantial agreement between the results of CSF-RPR and CSF-RPR-V (κ = 0.740). The sensitivities of CSF-VDRL, CSF-RPR, CSF-RPR-V, and CSF-TRUST were 81.4%, 76.2%, 79.5%, and 76.2%, respectively. Compared to CSF-VDRL, CSF-RPR, CSF-RPR-V, and CSF-TRUST had comparable PPVs and NPVs. However, the specificity of CSF-VDRL (90.3%) was significantly lower than those of the other tests (92.7 to 93.4%). Therefore, CSF-RPR, CSF-RPR-V, and CSF-TRUST can be considered alternative tests for neurosyphilis diagnosis in HIV-negative populations, particularly when the CSF-VDRL is not available. PMID:24335955

Interfacial area transport of steam-water two-phase flow in a vertical annulus at elevated pressures

NASA Astrophysics Data System (ADS)

Ozar, Basar

Analysis of accident scenarios in nuclear reactors are done by using codes such as TRACE and RELAP5. Large oscillations in the core void fraction are observed in calculations of advanced passive light water reactors (ALWRs), especially during the low pressure long-term cooling phase. These oscillations are attributed to be numerical in nature and served to limit the accuracy as well as the credibility of the calculations. One of the root causes of these unphysical oscillations is determined to be flow regime transitions caused by the usage of static flow regime maps. The interfacial area transport equation was proposed earlier in order to address these issues. Previous research successfully developed the foundation of the interfacial area transport equation and the experimental techniques needed for the measurement of interfacial area, bubble diameters and velocities. In the past, an extensive database has been then generated for adiabatic air-water conditions in vertical upward and downward bubbly-churn turbulent flows in pipes. Using this database, mechanistic models for the creation (bubble breakup) and destruction (bubble coalescence) of interfacial area have been developed for the bubblyslug flow regime transition. However, none of these studies investigated the effect of phase change. To address this need, a heated annular test section was designed and constructed. The design relied on a three level scaling approach: geometric scaling; hydrodynamic scaling; thermal scaling. The test section consisted of a heated and unheated section in order to study the sub-cooled boiling and bulk condensation/flashing and evaporation phenomena, respectively. Steam-water two-phase flow tests were conducted under sub-cooled boiling conditions in the heated section and with sub-cooled/super-heated bulk liquid in the unheated section. The modeling of interfacial area transport equation with phase change effects was introduced and discussed. Constitutive relations, which took phase change effects into account, for interfacial area transport equation were proposed and implemented. Effects of these constitutive relations on the prediction capability of the transport equation were discussed.

A thermal and chemical degradation approach to decipher pristane and phytane precursors in sedimentary organic matter

USGS Publications Warehouse

Koopmans, M.P.; Rijpstra, W.I.C.; Klapwijk, M.M.; De Leeuw, J. W.; Lewan, M.D.; Sinninghe, Damste J.S.

1999-01-01

A thermal and chemical degradation approach was followed to determine the precursors of pristane (Pr) and phytane (Ph) in samples from the Gessoso-solfifera, Ghareb and Green River Formations. Hydrous pyrolysis of these samples yields large amounts of Pr and Ph carbon skeletons, indicating that their precursors are predominantly sequestered in high-molecular-weight fractions. However, chemical degradation of the polar fraction and the kerogen of the unheated samples generally does not release large amounts of Pr and Ph. Additional information on the precursors of Pr and Ph is obtained from flash pyrolysis analyses of kerogens and residues after hydrous pyrolysis and after chemical degradation. Multiple precursors for Pr and Ph are recognised in these three samples. The main increase of the Pr/Ph ratio with increasing maturation temperature, which is associated with strongly increasing amounts of Pr and Ph, is probably due to the higher amount of precursors of Pr compared to Ph, and not to the different timing of generation of Pr and Ph.A thermal and chemical degradation approach was followed to determine the precursors of pristane (Pr) and phytane (Ph) in samples from the Gessoso-solfifera, Ghareb and Green River Formations. Hydrous pyrolysis of these samples yields large amounts of Pr and Ph carbon skeletons, indicating that their precursors are predominantly sequestered in high-molecular-weight fractions. However, chemical degradation of the polar fraction and the kerogen of the unheated samples generally does not release large amounts of Pr and Ph. Additional information on the precursors of Pr and Ph is obtained from flash pyrolysis analyses of kerogens and residues after hydrous pyrolysis and after chemical degradation. Multiple precursors for Pr and Ph are recognised in these three samples. The main increase of the Pr/Ph ratio with increasing maturation temperature, which is associated with strongly increasing amounts of Pr and Ph, is probably due to the higher amount of precursors of Pr compared to Ph, and not to the different timing of generation of Pr and Ph.

Round-Trip System Available to Measure Path Length Variation in Korea VLBI System for Geodesy

NASA Technical Reports Server (NTRS)

Oh, Hongjong; Kondo, Tetsuro; Lee, Jinoo; Kim, Tuhwan; Kim, Myungho; Kim, Suchul; Park, Jinsik; Ju, Hyunhee

2010-01-01

The construction project of Korea Geodetic VLBI officially started in October 2008. The construction of all systems will be completed by the end of 2011. The project was named Korea VLBI system for Geodesy (KVG), and its main purpose is to maintain the Korea Geodetic Datum. In case of the KVG system, an observation room with an H-maser frequency standard is located in a building separated from the antenna by several tens of meters. Therefore KVG system will adopt a so-called round-trip system to transmit reference signals to the antenna with reduction of the effect of path length variations. KVG s round-trip system is designed not only to use either metal or optical fiber cables, but also to measure path length variations directly. We present this unique round trip system for KVG.

Accounting for length-bias and selection effects in estimating the distribution of menstrual cycle length

PubMed Central

Lum, Kirsten J.; Sundaram, Rajeshwari; Louis, Thomas A.

2015-01-01

Prospective pregnancy studies are a valuable source of longitudinal data on menstrual cycle length. However, care is needed when making inferences of such renewal processes. For example, accounting for the sampling plan is necessary for unbiased estimation of the menstrual cycle length distribution for the study population. If couples can enroll when they learn of the study as opposed to waiting for the start of a new menstrual cycle, then due to length-bias, the enrollment cycle will be stochastically larger than the general run of cycles, a typical property of prevalent cohort studies. Furthermore, the probability of enrollment can depend on the length of time since a woman’s last menstrual period (a backward recurrence time), resulting in selection effects. We focus on accounting for length-bias and selection effects in the likelihood for enrollment menstrual cycle length, using a recursive two-stage approach wherein we first estimate the probability of enrollment as a function of the backward recurrence time and then use it in a likelihood with sampling weights that account for length-bias and selection effects. To broaden the applicability of our methods, we augment our model to incorporate a couple-specific random effect and time-independent covariate. A simulation study quantifies performance for two scenarios of enrollment probability when proper account is taken of sampling plan features. In addition, we estimate the probability of enrollment and the distribution of menstrual cycle length for the study population of the Longitudinal Investigation of Fertility and the Environment Study. PMID:25027273

X-ray structure determination at low resolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brunger, Axel T., E-mail: brunger@stanford.edu; Department of Molecular and Cellular Physiology, Stanford University; Department of Neurology and Neurological Sciences, Stanford University

2009-02-01

Refinement is meaningful even at 4 Å or lower, but with present methodologies it should start from high-resolution crystal structures whenever possible. As an example of structure determination in the 3.5–4.5 Å resolution range, crystal structures of the ATPase p97/VCP, consisting of an N-terminal domain followed by a tandem pair of ATPase domains (D1 and D2), are discussed. The structures were originally solved by molecular replacement with the high-resolution structure of the N-D1 fragment of p97/VCP, whereas the D2 domain was manually built using its homology to the D1 domain as a guide. The structure of the D2 domain alonemore » was subsequently solved at 3 Å resolution. The refined model of D2 and the high-resolution structure of the N-D1 fragment were then used as starting models for re-refinement against the low-resolution diffraction data for full-length p97. The re-refined full-length models showed significant improvement in both secondary structure and R values. The free R values dropped by as much as 5% compared with the original structure refinements, indicating that refinement is meaningful at low resolution and that there is information in the diffraction data even at ∼4 Å resolution that objectively assesses the quality of the model. It is concluded that de novo model building is problematic at low resolution and refinement should start from high-resolution crystal structures whenever possible.« less

The effect of length and starting year on trend analyses of temperatures in Spanish mainland (1951-2010). Seasonal analyses: Autumn (V)

NASA Astrophysics Data System (ADS)

Salinas Solé, Celia; Peña Angulo, Dhais; Gonzalez HIgaldo, Jose Carlos; Brunetti, MIchele

2017-04-01

In this poster we applied the moving window approach (see Poster I of this collection) to analyze trends of autumn and its corresponding months (September, October, November) temperature mean values of maximum (Tmax) and minimum (Tmin) in Spanish mainland to detect the effects of length period and starting year. Monthly series belong to Monthly Temperature dataset of Spanish mainland (MOTEDAS). Database contains in its grid format of 5236 pixels of monthly series (10x10 km). The threshold used in spatial analyses considers 20% of land under significant trend (p<0.05). The most striking results are as follow: • Seasonal trend analyses of Autumn Tmax show no significance at any temporal Windows. Trends of Tmin are significant in more than 20% of land until 1974-2010. The area affected in Tmin progressively increase from SE to NW. • Monthly trend analyses not detect any significance in Tmax, while in Tmin, particularly in October, an extended area is detected in temporal windows in between 1951-2010 to 1978-2010, but clearly concentrated in the starting years of initial 70´s. Spatial pattern of areas affected significantly seems to be from SE to NW for October, and South-North in September. To conclude autumn trend analyses of Tmax and Tmin in Spanish mainland only detect significant trend in Tmin, mostly located in the 70´s and extending from SE to central areas of study area.

Predictor sort sampling and one-sided confidence bounds on quantiles

Treesearch

Steve Verrill; Victoria L. Herian; David W. Green

2002-01-01

Predictor sort experiments attempt to make use of the correlation between a predictor that can be measured prior to the start of an experiment and the response variable that we are investigating. Properly designed and analyzed, they can reduce necessary sample sizes, increase statistical power, and reduce the lengths of confidence intervals. However, if the non- random...

Firefighter Math - a web-based learning tool

Treesearch

Dan Jimenez

2010-01-01

Firefighter Math is a web based interactive resource that was developed to help prepare wildland fire personnel for math based training courses. The website can also be used as a refresher for fire calculations including slope, flame length, relative humidity, flow rates, unit conversion, etc. The website is designed to start with basic math refresher skills and...

Charges and Fields in a Current-Carrying Wire

ERIC Educational Resources Information Center

Redzic, Dragan V.

2012-01-01

Charges and fields in a straight, infinite, cylindrical wire carrying a steady current are determined in the rest frames of ions and electrons, starting from the standard assumption that the net charge per unit length is zero in the lattice frame and taking into account a self-induced pinch effect. The analysis presented illustrates the mutual…

Concentrating Solar Power Projects - Borges Termosolar | Concentrating

Science.gov Websites

CSP plant is hybridized with two biomass units (2 x 22 MW thermal) that supply the required thermal avoiding daily start-up's and shut downs) and therefore, making possible a better use of the thermal block Manufacturer (Model): Siemens (UVAC 2010) HCE Type (Length): Evacuated (4 m) Heat-Transfer Fluid Type: Thermal

Effect of air gap variation on the performance of single stator single rotor axial flux permanent magnet generator

NASA Astrophysics Data System (ADS)

Kasim, Muhammad; Irasari, Pudji; Hikmawan, M. Fathul; Widiyanto, Puji; Wirtayasa, Ketut

2017-02-01

The axial flux permanent magnet generator (AFPMG) has been widely used especially for electricity generation. The effect of the air gap variation on the characteristic and performances of single rotor - single stator AFPMG has been described in this paper. Effect of air gap length on the magnetic flux distribution, starting torque and MMF has been investigated. The two dimensional finite element magnetic method has been deployed to model and simulated the characteristics of the machine which is based on the Maxwell equation. The analysis has been done for two different air gap lengths which were 2 mm and 4 mm using 2D FEMM 4.2 software at no load condition. The increasing of air gap length reduces the air-gap flux density. For air gap 2 mm, the maximum value of the flux density was 1.04 T while 0.73 T occured for air gap 4 mm.. Based on the experiment result, the increasing air gap also reduced the starting torque of the machine with 39.2 Nm for air gap 2 mm and this value decreased into 34.2 Nm when the air gap increased to 4 mm. Meanwhile, the MMF that was generated by AFPMG decreased around 22% at 50 Hz due to the reduction of magnetic flux induced on stator windings. Overall, the research result showed that the variation of air gap has significant effect on the machine characteristics.

Towards computational improvement of DNA database indexing and short DNA query searching.

PubMed

Stojanov, Done; Koceski, Sašo; Mileva, Aleksandra; Koceska, Nataša; Bande, Cveta Martinovska

2014-09-03

In order to facilitate and speed up the search of massive DNA databases, the database is indexed at the beginning, employing a mapping function. By searching through the indexed data structure, exact query hits can be identified. If the database is searched against an annotated DNA query, such as a known promoter consensus sequence, then the starting locations and the number of potential genes can be determined. This is particularly relevant if unannotated DNA sequences have to be functionally annotated. However, indexing a massive DNA database and searching an indexed data structure with millions of entries is a time-demanding process. In this paper, we propose a fast DNA database indexing and searching approach, identifying all query hits in the database, without having to examine all entries in the indexed data structure, limiting the maximum length of a query that can be searched against the database. By applying the proposed indexing equation, the whole human genome could be indexed in 10 hours on a personal computer, under the assumption that there is enough RAM to store the indexed data structure. Analysing the methodology proposed by Reneker, we observed that hits at starting positions [Formula: see text] are not reported, if the database is searched against a query shorter than [Formula: see text] nucleotides, such that [Formula: see text] is the length of the DNA database words being mapped and [Formula: see text] is the length of the query. A solution of this drawback is also presented.

Seismomorphogenesis: a novel approach to acclimatization of tissue culture regenerated plants.

PubMed

Sarmast, Mostafa Khoshhal; Salehi, Hassan; Khosh-Khui, Morteza

2014-12-01

Plantlets under in vitro conditions transferred to ex vivo conditions are exposed to biotic and abiotic stresses. Furthermore, in vitro regenerated plants are typically frail and sometimes difficult to handle subsequently increasing their risk to damage and disease; hence acclimatization of these plantlets is the most important step in tissue culture techniques. An experiment was conducted under in vitro conditions to study the effects of shaking duration (twice daily at 6:00 a.m. and 9:00 p.m. for 2, 4, 8, and 16 min at 250 rpm for 14 days) on Sansevieria trifasciata L. as a model plant. Results showed that shaking improved handling, total plant height, and leaf characteristics of the model plant. Forty-eight hours after 14 days of shaking treatments with increasing shaking time, leaf length decreased but proline content of leaf increased. However, 6 months after starting the experiment different results were observed. In explants that received 16 min of shaking treatment, leaf length and area and photosynthesis rate were increased compared with control plantlets. Six months after starting the experiment, control plantlets had 12.5 % mortality; however, no mortality was observed in other treated explants. The results demonstrated that shaking improved the explants' root length and number and as a simple, cost-effective, and non-chemical novel approach may be substituted for other prevalent acclimatization techniques used for tissue culture regenerated plantlets. Further studies with sensitive plants are needed to establish this hypothesis.

Experiments on Exhaust Noise of Tightly Integrated Propulsion Systems

NASA Technical Reports Server (NTRS)

Bridges, James E.; Brown, Clifford A.; Bozak, Richard F.

2014-01-01

A wide-ranging series of tests have been completed that seek to map the effects of installation, including jet by jet interaction effects, on exhaust noise from various nozzles in forward flight. The primary data was far-field acoustic spectral directivity. The goals of the test series were (i) to generate enough data for empirical models of the different effects, and (ii) to provide data for advanced computational noise predictions methods applied to simplified yet realistic configurations. Data is presented that demonstrate several checks on data quality and that provide an overview of trends observed to date. Among the findings presented here: (i) Data was repeatable between jet rigs for single nozzles with and without surfaces to within +/- 0.5 dB. (ii) The presence of a second jet caused a strong reduction of the summed noise in the plane of the two plumes and an increase over the expected source doubling in most other azimuthal planes. (iii) The impact of the second jet was reduced when the jets were unheated. (iv) The impact of adding a second isolated rectangular jet was relatively independent of the nozzle aspect ratio up to aspect ratio 8:1. (v) Forward flight had similar impact on a high aspect ratio (8:1) jet as on an axisymmetric jet, except at the peak noise angle where the impact was less. (vi) The effect of adding a second round jet to a tightly integrated nozzle where the nozzle lip was less than a diameter from the surface was very dependent upon the length of the surface downstream of the nozzle. (vii) When the nozzles were rectangular and tightly integrated with the airframe surface the impact of a second jet was very dependent upon how close together the two jets were. This paper serves as an overview of the test; other papers presented in the same conference will give more detailed analysis of the results.

Performance characteristics of a variable-area vane nozzle for vectoring an ASTOVL exhaust jet up to 45 deg

NASA Technical Reports Server (NTRS)

Mcardle, Jack G.; Esker, Barbara S.

1993-01-01

Many conceptual designs for advanced short-takeoff, vertical landing (ASTOVL) aircraft need exhaust nozzles that can vector the jet to provide forces and moments for controlling the aircraft's movement or attitude in flight near the ground. A type of nozzle that can both vector the jet and vary the jet flow area is called a vane nozzle. Basically, the nozzle consists of parallel, spaced-apart flow passages formed by pairs of vanes (vanesets) that can be rotated on axes perpendicular to the flow. Two important features of this type of nozzle are the abilities to vector the jet rearward up to 45 degrees and to produce less harsh pressure and velocity footprints during vertical landing than does an equivalent single jet. A one-third-scale model of a generic vane nozzle was tested with unheated air at the NASA Lewis Research Center's Powered Lift Facility. The model had three parallel flow passages. Each passage was formed by a vaneset consisting of a long and a short vane. The longer vanes controlled the jet vector angle, and the shorter controlled the flow area. Nozzle performance for three nominal flow areas (basic and plus or minus 21 percent of basic area), each at nominal jet vector angles from -20 deg (forward of vertical) to +45 deg (rearward of vertical) are presented. The tests were made with the nozzle mounted on a model tailpipe with a blind flange on the end to simulate a closed cruise nozzle, at tailpipe-to-ambient pressure ratios from 1.8 to 4.0. Also included are jet wake data, single-vaneset vector performance for long/short and equal-length vane designs, and pumping capability. The pumping capability arises from the subambient pressure developed in the cavities between the vanesets, which could be used to aspirate flow from a source such as the engine compartment. Some of the performance characteristics are compared with characteristics of a single-jet nozzle previously reported.

Effect of Soybean Casein Digest Agar Lot on Number of Bacillus stearothermophilus Spores Recovered †

PubMed Central

Pflug, I. J.; Smith, Geraldine M.; Christensen, Ronald

1981-01-01

In recent years it has become increasingly apparent that Bacillus stearothermophilus spores are affected by various environmental factors that influence the performance of the spores as biological indicators. One environmental factor is the recovery medium. The effect of different lots of commercial soybean casein digest agar on the number of colony-forming units per plate was examined in two series of experiments: (i) several lots of medium from two manufacturers were compared in single experiments, and (ii) paired media experiments with four lots of medium were carried out and yielded three-point survivor curves. The results demonstrate that commercial soybean casein digest agar is variable on a lot-to-lot basis. The variation was lowest when recovering unheated or minimally heated spores and increased greatly with the severity of heating. PMID:16345822

Effect of Annealing Temperature and Oxygen Flow in the Properties of Ion Beam Sputtered SnO-₂x Thin Films.

PubMed

Wang, Chun-Min; Huang, Chun-Chieh; Kuo, Jui-Chao; Sahu, Dipti Ranjan; Huang, Jow-Lay

2015-08-14

Tin oxide (SnO 2-x ) thin films were prepared under various flow ratios of O₂/(O₂ + Ar) on unheated glass substrate using the ion beam sputtering (IBS) deposition technique. This work studied the effects of the flow ratio of O₂/(O₂ + Ar), chamber pressures and post-annealing treatment on the physical properties of SnO₂ thin films. It was found that annealing affects the crystal quality of the films as seen from both X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis. In addition, the surface RMS roughness was measured with atomic force microscopy (AFM). Auger electron spectroscopy (AES) analysis was used to obtain the changes of elemental distribution between tin and oxygen atomic concentration. The electrical property is discussed with attention to the structure factor.

Changes in size of nano phase iron inclusions with temperature: Experimental simulation of space weathering effects at high temperature

NASA Astrophysics Data System (ADS)

Rout, S. S.; Moroz, L. V.; Stockhoff, T.; Baither, D.; Bischoff, A.; Hiesinger, H.

2011-10-01

The mean size of nano phase iron inclusions (npFe0), produced during the space weathering of iron-rich regolith of airless solar system bodies, significantly affects visible and near-infrared (VNIR) spectra. To experimentally simulate the change in the size of npFe0 inclusions with increasing temperature, we produced sputter film deposits on a silicon dioxide substrate by sputtering a pressed pellet prepared from fine olivine powder using 600V Ar+ ions. This silicon dioxide substrate covered with the deposit was later heated to 450°C for 24 hours in an oven under argon atmosphere. Initial TEM analysis of the unheated silicon dioxide substrate showed the presence of a ~ 50 nm-thick layer of an amorphous deposit with nano clusters that has not yet been identified.

Length scale effects and multiscale modeling of thermally induced phase transformation kinetics in NiTi SMA

NASA Astrophysics Data System (ADS)

Frantziskonis, George N.; Gur, Sourav

2017-06-01

Thermally induced phase transformation in NiTi shape memory alloys (SMAs) shows strong size and shape, collectively termed length scale effects, at the nano to micrometer scales, and that has important implications for the design and use of devices and structures at such scales. This paper, based on a recently developed multiscale model that utilizes molecular dynamics (MDs) simulations at small scales and MD-verified phase field (PhF) simulations at larger scales, reports results on specific length scale effects, i.e. length scale effects in martensite phase fraction (MPF) evolution, transformation temperatures (martensite and austenite start and finish) and in the thermally cyclic transformation between austenitic and martensitic phase. The multiscale study identifies saturation points for length scale effects and studies, for the first time, the length scale effect on the kinetics (i.e. developed internal strains) in the B19‧ phase during phase transformation. The major part of the work addresses small scale single crystals in specific orientations. However, the multiscale method is used in a unique and novel way to indirectly study length scale and grain size effects on evolution kinetics in polycrystalline NiTi, and to compare the simulation results to experiments. The interplay of the grain size and the length scale effect on the thermally induced MPF evolution is also shown in this present study. Finally, the multiscale coupling results are employed to improve phenomenological material models for NiTi SMA.

Correlation of cord blood telomere length with birth weight.

PubMed

Lee, Siew-Peng; Hande, Prakash; Yeo, George Sh; Tan, Ene-Choo

2017-09-08

Intrauterine growth restriction affects 3% of newborns; and the lightest 10% of whom are classified as small for gestational age (SGA). These low-birth weight newborns are at increased risk of neonatal morbidity such as hypoxia and hypoglycaemia. In later life, they are at higher risk of several age-related diseases such as cardiovascular and metabolic disorders and dementia. As having short telomeres is also associated with these diseases, we tested if these newborns might already start with shorter telomeres at birth. Relative telomere lengths were determined using quantitative real-time PCR in cord blood samples from 195 newborns of Chinese ancestry. Based on the telomere length normalised to a single copy gene and a reference DNA sample as internal control, we found statistically significant correlations between relative telomere length and both unadjusted and gestational age-adjusted birth weight, with the lighter newborns having shorter telomeres. The SGA birth weight group comprising the bottom 10% of the samples also had the shortest telomeres compared to the medium and heaviest birth weight groups. Our results indicate that there is reduction of cord blood telomere length for newborns with lower birth weight.

Equilibrium structure of the plasma sheet boundary layer-lobe interface

NASA Technical Reports Server (NTRS)

Romero, H.; Ganguli, G.; Palmadesso, P.; Dusenbery, P. B.

1990-01-01

Observations are presented which show that plasma parameters vary on a scale length smaller than the ion gyroradius at the interface between the plasma sheet boundary layer and the lobe. The Vlasov equation is used to investigate the properties of such a boundary layer. The existence, at the interface, of a density gradient whose scale length is smaller than the ion gyroradius implies that an electrostatic potential is established in order to maintain quasi-neutrality. Strongly sheared (scale lengths smaller than the ion gyroradius) perpendicular and parallel (to the ambient magnetic field) electron flows develop whose peak velocities are on the order of the electron thermal speed and which carry a net current. The free energy of the sheared flows can give rise to a broadband spectrum of electrostatic instabilities starting near the electron plasma frequency and extending below the lower hybrid frequency.

Experimental visualization of rapid maneuvering fish

NASA Astrophysics Data System (ADS)

Daigh, S.; Techet, A. H.

2003-11-01

A freshwater tropical fish, Danio aequippinatus, is studied undergoing rapid turning and fast starting maneuvers. This agile species of fish is ideal for this study as it is capable of quick turning and darting motions up to 5g's. The fgish studied are 4-5 cm in length. The speed and kinematics of the maneuvering is determined by video analysis. Planar and stereo Particle Image Velocimetry (PIV) is used to map the vortical patterns in the wake of the maneuvering fish. PIV visualizations reveal that during C-shaped maneuvers a ring shaped jet vortex is formed. Fast starting behavior is also presented. PIV data is used to approixmate the thrust vectoring force produced during each maneuver.

Accounting for length-bias and selection effects in estimating the distribution of menstrual cycle length.

PubMed

Lum, Kirsten J; Sundaram, Rajeshwari; Louis, Thomas A

2015-01-01

Prospective pregnancy studies are a valuable source of longitudinal data on menstrual cycle length. However, care is needed when making inferences of such renewal processes. For example, accounting for the sampling plan is necessary for unbiased estimation of the menstrual cycle length distribution for the study population. If couples can enroll when they learn of the study as opposed to waiting for the start of a new menstrual cycle, then due to length-bias, the enrollment cycle will be stochastically larger than the general run of cycles, a typical property of prevalent cohort studies. Furthermore, the probability of enrollment can depend on the length of time since a woman's last menstrual period (a backward recurrence time), resulting in selection effects. We focus on accounting for length-bias and selection effects in the likelihood for enrollment menstrual cycle length, using a recursive two-stage approach wherein we first estimate the probability of enrollment as a function of the backward recurrence time and then use it in a likelihood with sampling weights that account for length-bias and selection effects. To broaden the applicability of our methods, we augment our model to incorporate a couple-specific random effect and time-independent covariate. A simulation study quantifies performance for two scenarios of enrollment probability when proper account is taken of sampling plan features. In addition, we estimate the probability of enrollment and the distribution of menstrual cycle length for the study population of the Longitudinal Investigation of Fertility and the Environment Study. Published by Oxford University Press 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Walking with a Slower Friend

ERIC Educational Resources Information Center

Bailey, Herb; Kalman, Dan

2011-01-01

Fay and Sam go for a walk. Sam walks along the left side of the street while Fay, who walks faster, starts with Sam but walks to a point on the right side of the street and then returns to meet Sam to complete one segment of their journey. We determine Fay's optimal path minimizing segment length, and thus maximizing the number of times they meet…

FTIR Determination of Pollutants in Automobile Exhaust: An Environmental Chemistry Experiment Comparing Cold-Start and Warm-Engine Conditions

ERIC Educational Resources Information Center

Medhurst, Laura L.

2005-01-01

An experiment developed from the Advanced Integrated Environmental Laboratory illustrates the differences in automobile exhaust before and after the engine is warmed, using gas-phase Fourier transform infrared spectroscopy (FTIR). The apparatus consists of an Avatar 360 FTIR spectrometer from Nicolet fitted with a variable path length gas cell,…

Individual Differences and Learning Performance in Computer-based Training

DTIC Science & Technology

2011-02-01

student outcomes, and early job satisfaction and performance . This report is a selected literature review to provide a starting point from which to...job satisfaction and performance . Initial technical training pipelines will be chosen that vary in length, complexity, and instructional methods (e.g...as job satisfaction , evaluation of authority, citizenship behavior, withdrawal cognitions, and job performance (Colquitt, Conlon, Wesson, Porter

Guide to the Preparation of an Area of Distribution Manual.

ERIC Educational Resources Information Center

Hayes, Philip

This semester-length guide for high school distributive education students is geared to start the student thinking about the vocation he would like to enter by exploring one area of interest in marketing and distribution and then presenting the results in a research paper known as an area of distribution manual. The first 25 pages of this document…

Starting Out Right: How to Choose Books About Black People for Young Children.

ERIC Educational Resources Information Center

Latimer, Bettye I., Ed.; And Others

This critical and selective annotated bibliography is restricted to books written for preschool through grade three. Each title in this listing of "black inclusive" items is accompanied by a commentary whose length depends on the merits or faults of each book. The editors have recommended the books or have not according to the following rationale…

Clinical features and practice patterns of gastroschisis: a retrospective analysis using a Japanese national inpatient database.

PubMed

Fujiogi, Michimasa; Michihata, Nobuaki; Matsui, Hiroki; Fushimi, Kiyohide; Yasunaga, Hideo; Fujishiro, Jun

2018-05-16

The number of infants with gastroschisis is increasing worldwide, but advances in neonatal intensive care and parenteral nutrition have reduced gastroschisis mortality. Recent clinical data on gastroschisis are often from Western nations. This study aimed to examine clinical features and practice patterns of gastroschisis in Japan. We examined treatment options, outcomes, and discharge status among inpatients with simple gastroschisis (SG) and complex gastroschisis (CG), 2010-2016, using a national inpatient database in Japan. The 247 eligible patients (222 with SG) had average birth weight of 2102 g and average gestational age of 34 weeks; 30% had other congenital anomalies. Digestive anomalies were most common, followed by circulatory anomalies. In-hospital mortality was 8.1%. The median age at start of full enteral feeding was 30 days. The median length of stay was 46 days. There were no significant differences in outcomes except for length of stay, starting full enteral feeding and total hospitalization costs between the SG and CG groups. About 80% of patients were discharged to home without home medical care. The readmission rate was 28%. This study's findings on the clinical characteristics and outcomes of gastroschisis are useful for the clinical management of gastroschisis.

Theoretical analysis of the axial growth of nanowires starting with a binary eutectic droplet via vapor-liquid-solid mechanism

NASA Astrophysics Data System (ADS)

Liu, Qing; Li, Hejun; Zhang, Yulei; Zhao, Zhigang

2018-06-01

A series of theoretical analysis is carried out for the axial vapor-liquid-solid (VLS) growth of nanowires starting with a binary eutectic droplet. The growth model considering the entire process of axial VLS growth is a development of the approaches already developed by previous studies. In this model, the steady and unsteady state growth are considered both. The amount of solute species in a variable liquid droplet, the nanowire length, radius, growth rate and all other parameters during the entire axial growth process are treated as functions of growth time. The model provides theoretical predictions for the formation of nanowire shape, the length-radius and growth rate-radius dependences. It is also suggested by the model that the initial growth of single nanowire is significantly affected by Gibbs-Thompson effect due to the shape change. The model was applied on predictions of available experimental data of Si and Ge nanowires grown from Au-Si and Au-Ge systems respectively reported by other works. The calculations with the proposed model are in satisfactory agreement with the experimental results of the previous works.

Structural investigation of Y1-xNixBa2Cu3O7-δ superconductor

NASA Astrophysics Data System (ADS)

Hadi-Sichani, Behnaz; Shakeripour, Hamideh; Salamati, Hadi

2018-07-01

Y1-xNixBa2Cu3O7-δ superconducting samples with 0 ≤ x ≤ 0.02 were synthesized by standard solid-state reaction and characterized by the X-ray powder diffraction technique. The Rietveld fitted XRD refinements show that all samples are crystallized in single phase, having orthorhombic structure with Pmmm space group. We investigated the effect of adding a magnetic element on the structure of this superconductor. The c cell parameter increases by doping of Ni until to an optimal value of Ni content, x ∼ 0.004, and then starts to decrease by higher value of Ni substitution. Moreover, it is seen that Cu(2)sbnd O(2) bond length decreases with increasing Ni up to the optimal concentration of Ni, too. The CuO2 planes become more distorted and hence charge carriers may have better chances of transportation to the CuO2 planes. By further increasing of Ni content than the optimal value, the Cu(2)sbnd O(2) bond lengths start to increase, and cause CuO2 planes to be flatten. We suggest, besides affecting the magnetic characteristic of Ni impurity, the Ni substitution leads to interesting crystallographic changes.

Anthropogenic noise, but not artificial light levels predicts song behaviour in an equatorial bird.

PubMed

Dorado-Correa, Adriana M; Rodríguez-Rocha, Manuel; Brumm, Henrik

2016-07-01

Birds in cities start singing earlier in the morning than in rural areas; commonly this shift is attributed to light pollution. Some studies have suggested that traffic noise has a stronger influence on singing activity than artificial light does. Changes in the timing of singing behaviour in relation to noise and light pollution have only been investigated in the temperate zones. Tropical birds, however, experience little seasonal variation in day length and may be less dependent on light intensity as a modifier for reproductive behaviours such as song. To test whether noise or light pollution has a stronger impact on the dawn chorus of a tropical bird, we investigated the singing behaviour of rufous-collared sparrows (Zonotrichia capensis) in Bogota, Colombia at two times during the year. We found that birds in places with high noise levels started to sing earlier. Light pollution did not have a significant effect. Birds may begin to sing earlier in noisy areas to avoid acoustic masking by traffic later in the morning. Our results also suggest that some tropical birds may be less sensitive to variations in day length and thus less sensitive to light pollution.

Engineering Nanowire n-MOSFETs at L_{g}<8 nm

NASA Astrophysics Data System (ADS)

Mehrotra, Saumitra R.; Kim, SungGeun; Kubis, Tillmann; Povolotskyi, Michael; Lundstrom, Mark S.; Klimeck, Gerhard

2013-07-01

As metal-oxide-semiconductor field-effect transistors (MOSFET) channel lengths (Lg) are scaled to lengths shorter than Lg<8 nm source-drain tunneling starts to become a major performance limiting factor. In this scenario a heavier transport mass can be used to limit source-drain (S-D) tunneling. Taking InAs and Si as examples, it is shown that different heavier transport masses can be engineered using strain and crystal orientation engineering. Full-band extended device atomistic quantum transport simulations are performed for nanowire MOSFETs at Lg<8 nm in both ballistic and incoherent scattering regimes. In conclusion, a heavier transport mass can indeed be advantageous in improving ON state currents in ultra scaled nanowire MOSFETs.

A Simple Model of Pulsed Ejector Thrust Augmentation

NASA Technical Reports Server (NTRS)

Wilson, Jack; Deloof, Richard L. (Technical Monitor)

2003-01-01

A simple model of thrust augmentation from a pulsed source is described. In the model it is assumed that the flow into the ejector is quasi-steady, and can be calculated using potential flow techniques. The velocity of the flow is related to the speed of the starting vortex ring formed by the jet. The vortex ring properties are obtained from the slug model, knowing the jet diameter, speed and slug length. The model, when combined with experimental results, predicts an optimum ejector radius for thrust augmentation. Data on pulsed ejector performance for comparison with the model was obtained using a shrouded Hartmann-Sprenger tube as the pulsed jet source. A statistical experiment, in which ejector length, diameter, and nose radius were independent parameters, was performed at four different frequencies. These frequencies corresponded to four different slug length to diameter ratios, two below cut-off, and two above. Comparison of the model with the experimental data showed reasonable agreement. Maximum pulsed thrust augmentation is shown to occur for a pulsed source with slug length to diameter ratio equal to the cut-off value.

In situ visualization of metallurgical reactions in nanoscale Cu/Sn diffusion couples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yin, Qiyue; Stach, Eric A.; Gao, Fan

2015-02-10

The Cu–Sn metallurgical soldering reaction in two-segmented Cu–Sn nanowires is visualized by in-situ transmission electron microscopy. By varying the relative lengths of Cu and Sn segments, we show that the metallurgical reaction starts at ~ 200 ° with the formation of a Cu–Sn solid solution for the Sn/Cu length ratio smaller than 1:5 while the formation of Cu–Sn intermetallic compounds (IMCs) for larger Sn/Cu length ratios. Upon heating the nanowires up to ~ 500 °C, two phase transformation pathways occur, η-Cu₆Sn₅ → ε-Cu₃Sn → δ-Cu₄₁Sn₁₁ for nanowires with a long Cu segment and η-Cu₆Sn₅ → ε-Cu₃Sn → γ-Cu₃Sn with amore » short Cu segment. The dynamic in situ TEM visualization of the evolution of Kirkendall voids demonstrates that Cu diffuses faster both in Sn and IMCs than that of Sn in Cu₃ and IMCs, which is the underlying cause of the dependence of the IMC formation and associated phase evolution on the relative lengths of the Cu and Sn segments.« less

MO-G-17A-02: Computer Simulation Studies for On-Board Functional and Molecular Imaging of the Prostate Using a Robotic Multi-Pinhole SPECT System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, L; Duke University Medical Center, Durham, NC; Fudan University Shanghai Cancer Center, Shanghai

Purpose: To investigate prostate imaging onboard radiation therapy machines using a novel robotic, 49-pinhole Single Photon Emission Computed Tomography (SPECT) system. Methods: Computer-simulation studies were performed for region-of-interest (ROI) imaging using a 49-pinhole SPECT collimator and for broad cross-section imaging using a parallel-hole SPECT collimator. A male XCAT phantom was computersimulated in supine position with one 12mm-diameter tumor added in the prostate. A treatment couch was added to the phantom. Four-minute detector trajectories for imaging a 7cm-diameter-sphere ROI encompassing the tumor were investigated with different parameters, including pinhole focal length, pinhole diameter and trajectory starting angle. Pseudo-random Poisson noise wasmore » included in the simulated projection data, and SPECT images were reconstructed by OSEM with 4 subsets and up to 10 iterations. Images were evaluated by visual inspection, profiles, and Root-Mean- Square-Error (RMSE). Results: The tumor was well visualized above background by the 49-pinhole SPECT system with different pinhole parameters while it was not visible with parallel-hole SPECT imaging. Minimum RMSEs were 0.30 for 49-pinhole imaging and 0.41 for parallelhole imaging. For parallel-hole imaging, the detector trajectory from rightto- left yielded slightly lower RMSEs than that from posterior to anterior. For 49-pinhole imaging, near-minimum RMSEs were maintained over a broader range of OSEM iterations with a 5mm pinhole diameter and 21cm focal length versus a 2mm diameter pinhole and 18cm focal length. The detector with 21cm pinhole focal length had the shortest rotation radius averaged over the trajectory. Conclusion: On-board functional and molecular prostate imaging may be feasible in 4-minute scan times by robotic SPECT. A 49-pinhole SPECT system could improve such imaging as compared to broadcross-section parallel-hole collimated SPECT imaging. Multi-pinhole imaging can be improved by considering pinhole focal length, pinhole diameter, and trajectory starting angle. The project is supported by the NIH grant 5R21-CA156390.« less

Reported consent processes and demographics: a substudy of the INSIGHT Strategic Timing of AntiRetroviral Treatment (START) trial.

PubMed

Denning, E; Sharma, S; Smolskis, M; Touloumi, G; Walker, S; Babiker, A; Clewett, M; Emanuel, E; Florence, E; Papadopoulos, A; Sánchez, A; Tavel, J; Grady, C

2015-04-01

Efforts are needed to improve informed consent of participants in research. The Strategic Timing of AntiRetroviral Therapy (START) study provides a unique opportunity to study the effect of length and complexity of informed consent documents on understanding and satisfaction among geographically diverse participants. Interested START sites were randomized to use either the standard consent form or the concise consent form for all of the site's participants. A total of 4473 HIV-positive participants at 154 sites world-wide took part in the Informed Consent Substudy, with consent given in 11 primary languages. Most sites sent written information to potential participants in advance of clinic visits, usually including the consent form. At about half the sites, staff reported spending less than an hour per participant in the consent process. The vast majority of sites assessed participant understanding using informal nonspecific questions or clinical judgment. These data reflect the interest of START research staff in evaluating the consent process and improving informed consent. The START Informed Consent Substudy is by far the largest study of informed consent intervention ever conducted. Its results have the potential to impact how consent forms are written around the world. © 2015 British HIV Association.

Timing and duration of autumn leaf development in Sweden, a 4-year citizen science study

NASA Astrophysics Data System (ADS)

Bolmgren, Kjell; Langvall, Ola

2017-04-01

Phenology monitoring has traditionally focused on the start of phenological phases and the start of the growing season, especially when it comes to species-specific observations on the ground. The patterns of and the mechanisms behind the end of particular phases and the growing season itself are less studied and poorly understood. With a changing climate, the need to understand and predict effects on the length as well as on the end of phenological phases increase in importance, e.g. in relation to estimations of carbon budgets and validation of remote sensing data. Furthermore, different species may be affected in different ways by changing conditions. In this 4-year-study, tens of thousands of pupils in ages from 6 to 19 years old were involved in observing autumn leaf development of common deciduous tree species. Their observations were made near schools all over Sweden (55-68°N). Observations were made weekly between late August and early November and followed an image-based observation protocol, classifying autumn leaf development into five levels, from a summer-green (level 0) to a 100% autumn-colored (level 4) canopy. As expected, there was a general (negative) correlation between latitude and the start of leaf senescence (level 2; 1/3 autumn-colored canopy), but the correlation differed largely among years and between species. There was a week correlation between latitude and duration of the leaf senescence period, defined as the period between 1/3 (level 2) and 100% (level 4) of autumn-colored canopy. A delayed onset of the leaf senescence affected the duration of the leaf senescence period more strongly; One (1) day later start was correlated with a 5-day shorter period. Different species had different length of their senescence period, with oak (mainly Quercus robur) and birches (Betula pendula and B. pubescence) having on average a 50% longer period than trembling aspen (Populus tremula) and Norway maple (Acer platanoides).

Starting a robotic program in general thoracic surgery: why, how, and lessons learned.

PubMed

Cerfolio, Robert J; Bryant, Ayesha S; Minnich, Douglas J

2011-06-01

We report our experience in starting a robotic program in thoracic surgery. We retrospectively reviewed our experience in starting a robotic program in general thoracic surgery on a consecutive series of patients. Between February 2009 and September 2010, 150 patients underwent robotic operations. Types of procedures were lobectomy in 62, thymectomy in 30, and benign esophageal procedures in 6. No thymectomy or esophageal procedures required conversion. One conversion was needed for suspected bleeding for a mediastinal mass. Twelve patients were converted for lobectomy (none for bleeding, 1 in the last 24). Median operative time for robotic thymectomy was 119 minutes, and median length of stay was 1 day. The median time for robotic lobectomy was 185 minutes, and median length of stay was 2 days. There were no operative deaths. Morbidity occurred in 23 patients (15%). All patients with cancer had R0 resections and resection of all visible mediastinal and hilar lymph nodes. Robotic surgery is safe and oncologically sound. It requires training of the entire operating room team. The learning curve is steep, involving port placement, availability of the proper instrumentation, use of the correct robotic arms, and proper patient positioning. The robot provides an ideal surgical approach for thymectomy and other mediastinal tumors. Its advantage over thoracoscopy for pulmonary resection is unproven; however, we believe complete thoracic lymph node dissection and teaching is easier. Importantly, defined credentialing for surgeons and cost analysis studies are needed. Copyright © 2011 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Length limits fail to restructure a Largemouth Bass population: A 28‐year case history

USGS Publications Warehouse

Miranda, Leandro E.; Colvin, M.E.; Shamaskin, A. C.; Bull, L. A.; Holman, T.; Jones, R.

2017-01-01

Length limits have been implemented by fisheries management agencies to achieve population density, size structure, and angler satisfaction objectives. By redirecting harvest towards or away from particular length‐ or age‐groups, length limits rely on harvest by anglers to maintain a population at or near a desired state. The fish population changes that follow the implementation of harvest regulations may take several years to manifest, so long‐term monitoring may be needed to adequately evaluate length limits. We used an innovative application of cluster analysis to facilitate evaluation of the effects of three consecutive length limits on a population of Largemouth Bass Micropterus salmoides over a 28‐year period in Ross Barnett Reservoir, Mississippi. A 13–16‐in protected slot length limit (10 years), followed by a 15‐in minimum length limit (MLL; 11 years), followed by a 12‐in MLL (7 years) failed to restructure the Largemouth Bass population due to what we suggest was the expansion of a voluntary catch‐and‐release attitude that started in the first decade of the study period. Various population metrics shifted towards values expected in an unharvested population, and the observed shifts can be attributed to a harvest deficit created by the prevailing catch‐and‐release attitude. Largemouth Bass harvest regulations may no longer be relevant in many waters. The utility of regulations for restructuring Largemouth Bass populations is largely dependent on harvesting attitudes that vary geographically, depending on cultural characteristics and demographics.

New theory of stellar convection without the mixing-length parameter: new stellar atmosphere model

NASA Astrophysics Data System (ADS)

Pasetto, Stefano; Chiosi, Cesare; Cropper, Mark; Grebel, Eva K.

2018-01-01

Stellar convection is usually described by the mixing-length theory, which makes use of the mixing-length scale factor to express the convective flux, velocity, and temperature gradients of the convective elements and stellar medium. The mixing-length scale is proportional to the local pressure scale height of the star, and the proportionality factor (i.e. mixing-length parameter) is determined by comparing the stellar models to some calibrator, i.e. the Sun. No strong arguments exist to suggest that the mixing-length parameter is the same in all stars and all evolutionary phases and because of this, all stellar models in the literature are hampered by this basic uncertainty. In a recent paper [1] we presented a new theory that does not require the mixing length parameter. Our self-consistent analytical formulation of stellar convection determines all the properties of stellar convection as a function of the physical behavior of the convective elements themselves and the surrounding medium. The new theory of stellar convection is formulated starting from a conventional solution of the Navier-Stokes/Euler equations expressed in a non-inertial reference frame co-moving with the convective elements. The motion of stellar convective cells inside convective-unstable layers is fully determined by a new system of equations for convection in a non-local and time-dependent formalism. The predictions of the new theory are compared with those from the standard mixing-length paradigm with positive results for atmosphere models of the Sun and all the stars in the Hertzsprung-Russell diagram.

Large-Scale Collection and Analysis of Full-Length cDNAs from Brachypodium distachyon and Integration with Pooideae Sequence Resources

PubMed Central

Mochida, Keiichi; Uehara-Yamaguchi, Yukiko; Takahashi, Fuminori; Yoshida, Takuhiro; Sakurai, Tetsuya; Shinozaki, Kazuo

2013-01-01

A comprehensive collection of full-length cDNAs is essential for correct structural gene annotation and functional analyses of genes. We constructed a mixed full-length cDNA library from 21 different tissues of Brachypodium distachyon Bd21, and obtained 78,163 high quality expressed sequence tags (ESTs) from both ends of ca. 40,000 clones (including 16,079 contigs). We updated gene structure annotations of Brachypodium genes based on full-length cDNA sequences in comparison with the latest publicly available annotations. About 10,000 non-redundant gene models were supported by full-length cDNAs; ca. 6,000 showed some transcription unit modifications. We also found ca. 580 novel gene models, including 362 newly identified in Bd21. Using the updated transcription start sites, we searched a total of 580 plant cis-motifs in the −3 kb promoter regions and determined a genome-wide Brachypodium promoter architecture. Furthermore, we integrated the Brachypodium full-length cDNAs and updated gene structures with available sequence resources in wheat and barley in a web-accessible database, the RIKEN Brachypodium FL cDNA database. The database represents a “one-stop” information resource for all genomic information in the Pooideae, facilitating functional analysis of genes in this model grass plant and seamless knowledge transfer to the Triticeae crops. PMID:24130698

The core of tau-paired helical filaments studied by scanning transmission electron microscopy and limited proteolysis.

PubMed

von Bergen, Martin; Barghorn, Stefan; Müller, Shirley A; Pickhardt, Marcus; Biernat, Jacek; Mandelkow, Eva-Maria; Davies, Peter; Aebi, Ueli; Mandelkow, Eckhard

2006-05-23

In Alzheimer's disease and frontotemporal dementias the microtubule-associated protein tau forms intracellular paired helical filaments (PHFs). The filaments formed in vivo consist mainly of full-length molecules of the six different isoforms present in adult brain. The substructure of the PHF core is still elusive. Here we applied scanning transmission electron microscopy (STEM) and limited proteolysis to probe the mass distribution of PHFs and their surface exposure. Tau filaments assembled from the three repeat domain have a mass per length (MPL) of approximately 60 kDa/nm and filaments from full-length tau (htau40DeltaK280 mutant) have approximately 160 kDa/nm, compared with approximately 130 kDa/nm for PHFs from Alzheimer's brain. Polyanionic cofactors such as heparin accelerate assembly but are not incorporated into PHFs. Limited proteolysis combined with N-terminal sequencing and mass spectrometry of fragments reveals a protease-sensitive N-terminal half and semiresistant PHF core starting in the first repeat and reaching to the C-terminus of tau. Continued proteolysis leads to a fragment starting at the end of the first repeat and ending in the fourth repeat. PHFs from tau isoforms with four repeats revealed an additional cleavage site within the middle of the second repeat. Probing the PHFs with antibodies detecting epitopes either over longer stretches in the C-terminal half of tau or in the fourth repeat revealed that they grow in a polar manner. These data describe the physical parameters of the PHFs and enabled us to build a model of the molecular arrangement within the filamentous structures.

Length and weight of very low birth weight infants in Germany at 2 years of age: does it matter at what age they start complementary food?

PubMed

Spiegler, J; Eisemann, N; Ehlers, S; Orlikowsky, T; Kannt, O; Herting, E; Göpel, W

2015-06-01

We analysed at what age parents start complementary food in very low birth weight infants, determined risk factors for early introduction of complementary food (post-term age) and analysed whether the age at introduction of complementary food influences height or weight at 2 years of age. Parents of premature infants born in 2009-2011 answered questionnaires regarding introduction of complementary food in the first year of life (N=2262) and were followed up at a post-term age of 2 years (N=981). Length and weight were compared with full-term infants from the KiGGs study. Logistic and linear regression analyses were conducted to study predictors for early introduction of complementary food and the influence of age at introduction of complementary food on later height and weight. Average age at introduction of complementary food was 3.5 months post-term age. The lower the gestational age at birth, the earlier (post-term age) vegetables and meat were introduced. Age at introduction of complementary food was influenced by intrauterine growth restriction, gestational age at birth, maternal education and a developmental delay perceived by the parents. Length and weight at a post-term age of 2 years was not negatively influenced by early introduction of complementary food. VLBW infants are introduced to complementary food on average before a post-term age of 4 months. There was no negative effect of early introduction of complementary food on height and weight at 2 years of age.

Diterpanes, triterpanes, steranes, and aromatic hydrocarbons in natural bitumens and pyrolysates from different humic coals

NASA Technical Reports Server (NTRS)

Lu, Shan-Tan; Kaplan, Isaac R.

1992-01-01

Data are presented on the distribution of diterpanes, triterpanes, steranes, and aromatic hydrocarbons in the natural bitumens extracted from unheated coals identified as Rocky Mountain coal (RMC), Australian Gippsland Latrobe Eocene coal (GEC), Australian Gippsland Latrobe Cretaceous coal (GCC), and Texas Wilcox lignite (WL), as well as from pyrolysates obtained from heating of these coals. It was found that pentacyclic triterpanes are dominant in GEC, GCC, and WL, whereas diterpanes strongly predominate in the bitumen of RMC, indicating that resin is a more important constituent of RMC than of the other coals and that it releases the diterpenoids at an early stage of diagenesis. It was also found that the composition of diterpanes is different among these coals and that the distributions of sterane and triterpane in the natural bitumen of coals are very different from those of pyrolysates.

Survival of foot-and-mouth disease virus in cheese.

PubMed

Blackwell, J H

1976-09-01

Persistence of foot-and-mouth disease virus during the manufacture of Cheddar, Mozzarella, Camembert cheese prepared from milk of cows experimentally infected with the virus was studied. Cheese samples were made on a laboratory scale with commercial lactic acid starter cultures and the microbial protease MARZYME as a coagulant. Milk was heated at different temperatures for different intervals before it was made into cheese. Food-and-mouth disease virus survived the acidic conditions of Cheddar and Camembert cheese processing but not that of Mozzarella. Foot-and-mouth disease virus survived processing but not curing for 30 days in Cheddar cheese preparaed from heated milk. However, the virus survived curing for 60 days but not for 120 days in cheese (pH 5) prepared from unheated milk. Foot-and-mouth disease virus survived in Camembert cheese (pH 5) for 21 days at 2 C but not for 35 days.

Heat addition to a subsonic boundary layer: A preliminary analytical study

NASA Technical Reports Server (NTRS)

Macha, J. M.; Norton, D. J.

1971-01-01

A preliminary analytical study of the effects of heat addition to the subsonic boundary layer flow over a typical airfoil shape is presented. This phenomenon becomes of interest in the space shuttle mission since heat absorbed by the wing structure during re-entry will be rejected to the boundary layer during the subsequent low speed maneuvering and landing phase. A survey of existing literature and analytical solutions for both laminar and turbulent flow indicate that a heated surface generally destabilizes the boundary layer. Specifically, the boundary layer thickness is increased, the skin friction at the surface is decreased and the point of flow separation is moved forward. In addition, limited analytical results predict that the angle of attack at which a heated airfoil will stall is significantly less than the stall angle of an unheated wing. These effects could adversely affect the lift and drag, and thus the maneuvering capabilities of booster and orbiter shuttle vehicles.

Numerical Analysis of Base Flowfield for a Four-Engine Clustered Nozzle Configuration

NASA Technical Reports Server (NTRS)

Wang, Ten-See

1995-01-01

Excessive base heating has been a problem for many launch vehicles. For certain designs such as the direct dump of turbine exhaust inside and at the lip of the nozzle, the potential burning of the turbine exhaust in the base region can be of great concern. Accurate prediction of the base environment at altitudes is therefore very important during the vehicle design phase. Otherwise, undesirable consequences may occur. In this study, the turbulent base flowfield of a cold flow experimental investigation for a four-engine clustered nozzle was numerically benchmarked using a pressure-based computational fluid dynamics (CFD) method. This is a necessary step before the benchmarking of hot flow and combustion flow tests can be considered. Since the medium was unheated air, reasonable prediction of the base pressure distribution at high altitude was the main goal. Several physical phenomena pertaining to the multiengine clustered nozzle base flow physics were deduced from the analysis.

Laser-Induced Thermal Acoustic Measurements in a Highly Back-Pressured Scramjet Isolator Model: A Research Plan

NASA Technical Reports Server (NTRS)

Middleton, Troy F.; Balla, Robert J.; Baurle, Robert A.; Wilson, Lloyd G.

2008-01-01

Under the Propulsion Discipline of NASA s Fundamental Aeronautics Program s Hypersonics Project, a test apparatus, for testing a scramjet isolator model, is being constructed at NASA's Langley Research Center. The test apparatus will incorporate a 1-inch by 2-inch by 15-inch-long scramjet isolator model supplied with 2.1 lbm/sec of unheated dry air through a Mach 2.5 converging-diverging nozzle. The planned research will incorporate progressively more challenging measurement techniques to characterize the flow field within the isolator, concluding with the application of the Laser-Induced Thermal Acoustic (LITA) measurement technique. The primary goal of this research is to use the data acquired to validate Computational Fluid Dynamics (CFD) models employed to characterize the complex flow field of a scramjet isolator. This paper describes the test apparatus being constructed, pre-test CFD simulations, and the LITA measurement technique.

Analysis and Sizing for Transient Thermal Heating of Insulated Aerospace Vehicle Structures

NASA Technical Reports Server (NTRS)

Blosser, Max L.

2012-01-01

An analytical solution was derived for the transient response of an insulated structure subjected to a simplified heat pulse. The solution is solely a function of two nondimensional parameters. Simpler functions of these two parameters were developed to approximate the maximum structural temperature over a wide range of parameter values. Techniques were developed to choose constant, effective thermal properties to represent the relevant temperature and pressure-dependent properties for the insulator and structure. A technique was also developed to map a time-varying surface temperature history to an equivalent square heat pulse. Equations were also developed for the minimum mass required to maintain the inner, unheated surface below a specified temperature. In the course of the derivation, two figures of merit were identified. Required insulation masses calculated using the approximate equation were shown to typically agree with finite element results within 10%-20% over the relevant range of parameters studied.

Normal incidence reflectance of ion beam deposited SiC films in the EUV

NASA Technical Reports Server (NTRS)

Keski-Kuha, Ritva A. M.; Osantowski, John F.; Herzig, Howard; Gum, Jeffrey S.; Toft, Albert R.

1988-01-01

Results are presented from an experimental investigation of the normal-incidence reflectance at 58.4, 92.0, and 121.6 nm wavelength of 30- and 80-nm-thick SiC films produced by ion-beam deposition on unheated 5 x 5-cm microscope slides. The films were deposited in the 2-m evaporator described by Bradford et al. (1969) with chamber base pressure 1 microtorr, operating pressure 40 microtorr, and a 50-62-mA 750-eV Ar ion beam; the reflectance measurements were obtained in the reflector-monochromator system described by Osantowski (1974). Reflectances of over 30 percent were found at 92 and 121.6 nm, almost equal to those of polished CVD films of SiC and degrading only slightly after aging for 4 months. It is suggested that ion-beam deposition may be the best low-temperature technique for coating EUV optics for space astronomy.

Project environmental microbiology as related to planetary quarantine

NASA Technical Reports Server (NTRS)

Pflug, I. J.

1974-01-01

Microbiological analyses of soil particles allow for the following conclusions: (1) there is a considerable range in the values of aerobic, mesophilic microbial counts associated with different size soil fractions; (2) as soil particle size increases, there is an increase in the mean microbial concentration per particle; (3) plate counts of aerobic, mesophilic organisms in unheated soils yielded a mean concentration of about six organisms per particle for the smallest soil fraction; (4) aerobic, mesophilic counts for sonicated particles heated at 80 C for 20 minutes yielded mean values of about two organisms per particle for the smallest particles; (5) some actinomycetes associated with the soil fractions could survive dry heat treatment at 110 C for one hour; and (6) soil particles stored under ambient laboratory conditions for 2.5 years aerobic, mesophilic plate counts which were comparable or slightly greater than the counts for more recently collected soil.

Blueberries and Tofu: Friend or Foe?

NASA Astrophysics Data System (ADS)

D'Ascoli, Jennifer; Lee, Susanne

2004-03-01

Two flavonoids, naringenin and genistein found in blueberries and soybeans, respectively, scavenge free radicals and exhibit anti- breast and prostate cancer properties. When consumed in foods, these flavonoids usually are subject to heat, yet all biological studies have been performed with unheated molecules. We have explored and will report on the three-dimensional, molecular structure changes we have thermally-induced in naringenin and genistein. We have measured and will discuss the flavonoids' thermodynamic properties as a function of temperature. Several endothermic transformations were observed along with a marked color change that remained when the flavonoids were dissolved in a solvent, indicating their molecular structures had been altered by the heat. Ultraviolet-Visible spectroscopy, and proton and carbon 1-D nuclear magnetic resonance will be presented that show the change was associated with a decrease in electron localization within the molecules. We will explain how such modified structures could scavenge free radicals more effectively and affect breast cancer cell proliferation.

Spacecraft utensil/hand cleansing fixture. [for space shuttles

NASA Technical Reports Server (NTRS)

Rosener, A. A.; Jonkoniec, T. G.; Wilson, D. A.; Schulz, J. R.

1975-01-01

A system concept for an inflight utensil/hand cleansing fixture is described which includes the following features: (1) capability for efficient cleansing and rinsing of utensils or hands, and (2) provision for general waste fluid disposal. The design concept provides for the capability of functioning for a 30 day shuttle mission containing seven occupants/users. The long range goal is to provide a functioning system capable of operating for missions of at least 120 days. The fixture is a self-contained unit that can be installed in the standard water interface requirements. Service to the unit is a single source of unheated potable water and water is discharged from the unit into a single return waste connection. In addition, the design includes provisions for the intake and discharge of purge air and the discharge of evolved gases. Both the air and the gases are filtered or processed in the assembly before releasing them into the habitability area.

Product selectivity in plasmonic photocatalysis for carbon dioxide hydrogenation.

PubMed

Zhang, Xiao; Li, Xueqian; Zhang, Du; Su, Neil Qiang; Yang, Weitao; Everitt, Henry O; Liu, Jie

2017-02-23

Photocatalysis has not found widespread industrial adoption, in spite of decades of active research, because the challenges associated with catalyst illumination and turnover outweigh the touted advantages of replacing heat with light. A demonstration that light can control product selectivity in complex chemical reactions could prove to be transformative. Here, we show how the recently demonstrated plasmonic behaviour of rhodium nanoparticles profoundly improves their already excellent catalytic properties by simultaneously reducing the activation energy and selectively producing a desired but kinetically unfavourable product for the important carbon dioxide hydrogenation reaction. Methane is almost exclusively produced when rhodium nanoparticles are mildly illuminated as hot electrons are injected into the anti-bonding orbital of a critical intermediate, while carbon monoxide and methane are equally produced without illumination. The reduced activation energy and super-linear dependence on light intensity cause the unheated photocatalytic methane production rate to exceed the thermocatalytic rate at 350 °C.

Adaptive ingredients against food spoilage in Japanese cuisine.

PubMed

Ohtsubo, Yohsuke

2009-12-01

Billing and Sherman proposed the antimicrobial hypothesis to explain the worldwide spice use pattern. The present study explored whether two antimicrobial ingredients (i.e. spices and vinegar) are used in ways consistent with the antimicrobial hypothesis. Four specific predictions were tested: meat-based recipes would call for more spices/vinegar than vegetable-based recipes; summer recipes would call for more spices/vinegar than winter recipes; recipes in hotter regions would call for more spices/vinegar; and recipes including unheated ingredients would call for more spices/vinegar. Spice/vinegar use patterns were compiled from two types of traditional Japanese cookbooks. Dataset I included recipes provided by elderly Japanese housewives. Dataset II included recipes provided by experts in traditional Japanese foods. The analyses of Dataset I revealed that the vinegar use pattern conformed to the predictions. In contrast, analyses of Dataset II generally supported the predictions in terms of spices, but not vinegar.

Heat stabilization of blood spot samples for determination of metabolically unstable drug compounds

PubMed Central

Blessborn, Daniel; Sköld, Karl; Zeeberg, David; Kaewkhao, Karnrawee; Sköld, Olof; Ahnoff, Martin

2014-01-01

Background Sample stability is critical for accurate analysis of drug compounds in biosamples. The use of additives to eradicate the enzymatic activity causing loss of these analytes has its limitations. Results A novel technique for sample stabilization by rapid, high-temperature heating was used. The stability of six commercial drugs in blood and blood spots was investigated under various conditions with or without heat stabilization at 95°C. Oseltamivir, cefotaxime and ribavirin were successfully stabilized by heating whereas significant losses were seen in unheated samples. Amodiaquine was stable with and without heating. Artemether and dihydroartemisinin were found to be very heat sensitive and began to decompose even at 60°C. Conclusion Heat stabilization is a viable technique to maintain analytes in blood spot samples, without the use of chemical additives, by stopping the enzymatic activity that causes sample degradation. PMID:23256470

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirchner, F.; Benninghoven, A.

Investigations on the applicability of double-focusing counter-tube mass spectrometers with iodine vapor counters for determination of mass spectra and trace analysis are reported. An ionizing electron current of several 10/sup -10/ amp is generally sufficient for taking normal mass spectra with counter tube and recorder. The effect of the iodine vapor can be kept so low through simple cutin of a condenser cooled with liquid air that the 127 mass of the iodine atom is scarcely noticeable. In the determination of the minimum gas mass that could be detected and quantitatively measured, it was surprisingly proved that in the usemore » of He as the test gas in the unheated mass spectrometer at a gas pressure of 5 x 10/sup -6/ Torr of the residual gas, there is a perturbation maximum at mass 4. This could significantly affect the sensitivity of helium detection. (tr-auth)« less

Effect of Ice Formations on Section Drag of Swept NACA 63A-009 Airfoil with Partical-span Leading-edge Slat for Various Modes of Thermal Ice Protection

NASA Technical Reports Server (NTRS)

Von Glahn, Uwe H; Gray, Vernon H

1954-01-01

Studies were made to determine the effect of ice formations on the section drag of a 6.9-foot-chord 36 degree swept NACA 63A-009 airfoil with partial-span leading-edge slat. In general, the icing of a thin swept airfoil will result in greater aerodynamic penalties than for a thick unswept airfoil. Glaze-ice formations at the leading edge of the airfoil caused large increases in section drag even at liquid-water content of 0.39 gram per cubic meter. The use of an ice-free parting strip in the stagnation region caused a negligible change in drag compared with a completely unheated airfoil. Cyclic de-icing when properly applied caused the drag to decrease almost to the bare-airfoil drag value.

Rime-, mixed- and glaze-ice evaluations of three scaling laws

NASA Technical Reports Server (NTRS)

Anderson, David N.

1994-01-01

This report presents the results of tests at NASA Lewis to evaluate three icing scaling relationships or 'laws' for an unheated model. The laws were LWC x time = constant, one proposed by a Swedish-Russian group and one used at ONERA in France. Icing tests were performed in the NASA Lewis Icing Research Tunnel (IRT) with cylinders ranging from 2.5- to 15.2-cm diameter. Reference conditions were chosen to provide rime, mixed and glaze ice. Scaled conditions were tested for several scenarios of size and velocity scaling, and the resulting ice shapes compared. For rime-ice conditions, all three of the scaling laws provided scaled ice shapes which closely matched reference ice shapes. For mixed ice and for glaze ice none of the scaling laws produced consistently good simulation of the reference ice shapes. Explanations for the observed results are proposed, and scaling issues requiring further study are identified.

Product selectivity in plasmonic photocatalysis for carbon dioxide hydrogenation

PubMed Central

Zhang, Xiao; Li, Xueqian; Zhang, Du; Su, Neil Qiang; Yang, Weitao; Everitt, Henry O.; Liu, Jie

2017-01-01

Photocatalysis has not found widespread industrial adoption, in spite of decades of active research, because the challenges associated with catalyst illumination and turnover outweigh the touted advantages of replacing heat with light. A demonstration that light can control product selectivity in complex chemical reactions could prove to be transformative. Here, we show how the recently demonstrated plasmonic behaviour of rhodium nanoparticles profoundly improves their already excellent catalytic properties by simultaneously reducing the activation energy and selectively producing a desired but kinetically unfavourable product for the important carbon dioxide hydrogenation reaction. Methane is almost exclusively produced when rhodium nanoparticles are mildly illuminated as hot electrons are injected into the anti-bonding orbital of a critical intermediate, while carbon monoxide and methane are equally produced without illumination. The reduced activation energy and super-linear dependence on light intensity cause the unheated photocatalytic methane production rate to exceed the thermocatalytic rate at 350 °C. PMID:28230100

The extent of shifts in vegetation phenology between rural and urban areas within a human-dominated region.

PubMed

Dallimer, Martin; Tang, Zhiyao; Gaston, Kevin J; Davies, Zoe G

2016-04-01

Urbanization is one of the major environmental challenges facing the world today. One of its particularly pressing effects is alterations to local and regional climate through, for example, the Urban Heat Island. Such changes in conditions are likely to have an impact on the phenology of urban vegetation, which will have knock-on implications for the role that urban green infrastructure can play in delivering multiple ecosystem services. Here, in a human-dominated region, we undertake an explicit comparison of vegetation phenology between urban and rural zones. Using satellite-derived MODIS-EVI data from the first decade of the 20th century, we extract metrics of vegetation phenology (date of start of growing season, date of end of growing season, and length of season) for Britain's 15 largest cities and their rural surrounds. On average, urban areas experienced a growing season 8.8 days longer than surrounding rural zones. As would be expected, there was a significant decline in growing season length with latitude (by 3.4 and 2.4 days/degree latitude in rural and urban areas respectively). Although there is considerable variability in how phenology in urban and rural areas differs across our study cities, we found no evidence that built urban form influences the start, end, or length of the growing season. However, the difference in the length of the growing season between rural and urban areas was significantly negatively associated with the mean disposable household income for a city. Vegetation in urban areas deliver many ecosystem services such as temperature mitigation, pollution removal, carbon uptake and storage, the provision of amenity value for humans and habitat for biodiversity. Given the rapid pace of urbanization and ongoing climate change, understanding how vegetation phenology will alter in the future is important if we wish to be able to manage urban greenspaces effectively.

Nonlinear Elasticity of Doped Semiconductors

DTIC Science & Technology

2017-02-01

experimental data from the Stanford University group. The obtained results show that the goal of the project has been reached. MSU has full...length extension modes in n-doped silicon (Si) microelectromechanical (MEMS) resonators and have started a comparison with the experimental data from...coupling to shear strain modes. • Tested the theory against the existing in the literature experimental data on the effect of doping on the speed of

The effect of use density and length of stay on visitor experience in wilderness

Treesearch

David N. Cole; Troy E. Hall

2012-01-01

We assessed the degree to which visitor experiences vary between (1) very high use and moderate use places and (2) day users and overnight users. The study was conducted at 10 trailheads in the Alpine Lakes Wilderness, WA, and the Three Sisters Wilderness, OR. Some visitors were asked about trip motivations as they started their trip; others were asked what they...

Plasma current start-up by the outer ohmic heating coils in the Saskatchewan TORus Modified (STOR-M) iron core tokamak

DOE PAGES

Mitarai, O.; Xiao, C.; McColl, D.; ...

2015-03-24

A plasma current up to 15 kA has been driven with outer ohmic heating (OH) coils in the STOR-M iron core tokamak. Even when the inner OH coil is disconnected, the outer OH coils alone can induce the plasma current as primary windings and initial breakdown are even easier in this coil layout. Our results suggest a possibility to use an iron core in a spherical tokamak to start up the plasma current without a central solenoid. Finally, the effect of the iron core saturation on the extension of the discharge pulse length has been estimated for further experiments inmore » the STOR-M tokamak.« less

ONEGUN: an interior ballistics code for closed breech guns

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reis, G.E.

1982-07-01

This program computes the gun and projectile motion and the gas thermodynamic properties (the internal ballistics) of a closed breech gun. Heat losses and friction losses are taken into account. A dual grain charge can be used. The inputs required are the usual propellant characteristics (density, impetus, gamma, burn rate coefficient and exponent, grain geometry, covolume and isochoric flame temperature). The gun characteristics (chamber volume and length, rifle twist rate, bore diameter, gun weight and start pressure) and the projectile characteristics (projectile weight, radius of gyration and start pressure). The output consists of the motion (displacement, velocity, and acceleration) ofmore » both the projectile and the recoiling gun and the gas pressures and temperature, all as a function of time.« less

Plasma current start-up by the outer ohmic heating coils in the Saskatchewan TORus Modified (STOR-M) iron core tokamak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitarai, O.; Xiao, C.; McColl, D.

A plasma current up to 15 kA has been driven with outer ohmic heating (OH) coils in the STOR-M iron core tokamak. Even when the inner OH coil is disconnected, the outer OH coils alone can induce the plasma current as primary windings and initial breakdown are even easier in this coil layout. Our results suggest a possibility to use an iron core in a spherical tokamak to start up the plasma current without a central solenoid. Finally, the effect of the iron core saturation on the extension of the discharge pulse length has been estimated for further experiments inmore » the STOR-M tokamak.« less

Antiretroviral treatment during pregnancy.

PubMed

Keiser, Olivia; Gayet-Ageron, Angèle; Rudin, Christoph; Brinkhof, Martin W G; Gremlich, Erika; Wunder, Dorothea; Drack, Gero; Hirschel, Bernard; de Tejada, Begoña Martinez

2008-11-12

Virologic failure of HIV-positive patients is of special concern during pregnancy. We compared virologic failure and the frequency of treatment changes in pregnant and non-pregnant women of the Swiss HIV Cohort Study. Using data on 372 pregnancies in 324 women we describe antiretroviral therapy during pregnancy. Pregnant women on HAART at conception (n = 131) were matched to 228 non-pregnant women (interindividual comparison) and to a time period of equal length before and after pregnancy (intraindividual comparison). Women starting HAART during pregnancy (n = 145) were compared with 578 non-pregnant women starting HAART. The median age at conception was 31 years, 16% (n = 50) were infected through injecting drug use and the median CD4 cell count was 489 cells/microl. In the majority of pregnancies (n = 220, 59%), women had started ART before conception. When ART was started during pregnancy (n = 145, 39%), it was mainly during the second trimester (n = 100, 69%). Two thirds (n = 26) of 35 women starting in the third trimester were diagnosed with HIV during pregnancy. The risk of virologic failure tended to be lower in pregnant than in non-pregnant women [adjusted odds ratio 0.52 (95% confidence interval 0.25-1.09, P = 0.08)], but was similar in the intraindividual comparison (adjusted odds ratio 1.04, 95% confidence interval 0.48-2.28). Women starting HAART during pregnancy changed the treatment less often than non-pregnant women. Despite the physiological changes occurring during pregnancy, HIV infected pregnant women are not at higher risk of virologic failure.

Association of Proteinuria with Central Venous Catheter Use at Initial Hemodialysis

PubMed Central

Park, Ken J; Johnson, Eric S; Smith, Ning; Mosen, David M; Thorp, Micah L

2018-01-01

Context Central venous catheter (CVC) use is associated with increased mortality and complications in hemodialysis recipients. Although prevalent CVC use has decreased, incident use remains high. Objective To examine characteristics associated with CVC use at initial dialysis, specifically looking at proteinuria as a predictor of interest. Design Retrospective cohort of 918 hemodialysis recipients from Kaiser Permanente Northwest who started hemodialysis from January 1, 2004, to January 1, 2014. Main Outcome Measures Multivariable logistic regression was used to examine an association of proteinuria with the primary outcome of CVC use. Results More than one-third (36%) of patients in our cohort started hemodialysis with an arteriovenous fistula, and 64% started with a CVC. Proteinuria was associated with starting hemodialysis with a CVC (likelihood ratio test, p < 0.001) after adjustment for age, peripheral vascular disease, congestive heart failure, diabetes, sex, race, and length of predialysis care. However, on pairwise comparison, only patients with midgrade proteinuria (0.5–3.5 g) had lower odds of starting hemodialysis with a CVC (odds ratio = 0.39, 95% confidence interval = 0.24–0.65). Conclusion Proteinuria was associated with use of CVC at initial hemodialysis. However, a graded association did not exist, and only patients with midgrade proteinuria had significantly lower odds of CVC use. Our findings suggest that proteinuria is an explanatory finding for CVC use but may not have pragmatic value for decision making. Patients with lower levels of proteinuria may have a higher risk of starting dialysis with a CVC. PMID:29236655

Association of Proteinuria with Central Venous Catheter Use at Initial Hemodialysis.

PubMed

Park, Ken J; Johnson, Eric S; Smith, Ning; Mosen, David M; Thorp, Micah L

2017-01-01

Central venous catheter (CVC) use is associated with increased mortality and complications in hemodialysis recipients. Although prevalent CVC use has decreased, incident use remains high. To examine characteristics associated with CVC use at initial dialysis, specifically looking at proteinuria as a predictor of interest. Retrospective cohort of 918 hemodialysis recipients from Kaiser Permanente Northwest who started hemodialysis from January 1, 2004, to January 1, 2014. Multivariable logistic regression was used to examine an association of proteinuria with the primary outcome of CVC use. More than one-third (36%) of patients in our cohort started hemodialysis with an arteriovenous fistula, and 64% started with a CVC. Proteinuria was associated with starting hemodialysis with a CVC (likelihood ratio test, p < 0.001) after adjustment for age, peripheral vascular disease, congestive heart failure, diabetes, sex, race, and length of predialysis care. However, on pairwise comparison, only patients with midgrade proteinuria (0.5-3.5 g) had lower odds of starting hemodialysis with a CVC (odds ratio = 0.39, 95% confidence interval = 0.24-0.65). Proteinuria was associated with use of CVC at initial hemodialysis. However, a graded association did not exist, and only patients with midgrade proteinuria had significantly lower odds of CVC use. Our findings suggest that proteinuria is an explanatory finding for CVC use but may not have pragmatic value for decision making. Patients with lower levels of proteinuria may have a higher risk of starting dialysis with a CVC.

High temperature extended x-ray absorption fine structure study of multiferroic BiFeO3

NASA Astrophysics Data System (ADS)

Raghavendra Reddy, V.; Meneghini, Carlo; Kothari, Deepti; Gupta, Ajay; Aquilanti, Giuliana

2012-08-01

Local atomic structure modifications around Fe atoms in polycrystalline multiferroic BiFeO3 are studied by Fe K edge x-ray absorption spectroscopy as a function of temperature across the Néel temperature (TN = 643 K) in order to reveal local structure modifications related to the magnetic transition. This work demonstrates that on crossing TN the local structure around Fe shows peculiar changes: the Fe-O bond lengths get shorter, the ligand symmetry increases and the Fe-O bond length disorder (σ2) deviates from Debye behaviour. These results suggest that the structural transition at the ferroelectric Curie temperature (TC = 1103 K) is anticipated by early local rearrangement of the structure starting already at TN.

Double, Double Toil and Trouble: The Melt Inclusion Bubble

NASA Astrophysics Data System (ADS)

Rasmussen, D. J.; Plank, T. A.

2017-12-01

Melt inclusions provide a powerful means for probing the depth of magmatic processes and volatile budgets of magmas. Both objectives require that the inclusions accurately record the volatile content of the entrapped melt. However, post-entrapment cooling and diffusive loss of water lead to a decrease in internal pressure, resulting in volatile exsolution (importantly CO2) and vapor bubble growth in inclusions. Several methods have been developed recently that attempt to reconstruct the entrapped CO2 contents, but the methods yield inconsistent results. Here we report on new homogenization experiments and attempt to reconcile inconsistencies in CO2 reconstruction methods. Experiments were conducted on olivine-hosted melt inclusions from Seguam volcano using a piston cylinder apparatus at 500 MPa, 1150-1170 °C, hydrous conditions, and a run duration of 1-2 hours. FTIR analyses of the homogenized inclusions show some diffusive water gain (≤1 wt% excess) relative to unheated inclusions (most 4 wt%). Inclusions from this same sample were previously reconstructed using Raman addition (RA; Moore et al., 2015), and we have constituted the CO2 with two different computational approaches: the ideal gas law (IGL; Shaw et al., 2010) and a bubble growth model (BG; Riker, 2005). CO2 and S contents of heated inclusions are correlated, defining a S-CO2 degassing path. Relative to this empirical degassing path, IGL results are offset to higher CO2 (100s-1000s of ppm) or lower S (100s of ppm), while RA and BG results overlap and are offset to lower CO2 (≤100s of ppm) or higher S (≤100s of ppm). Because S contents of heated and unheated inclusions have similar ranges, we attribute the discrepancy to CO2. High values of CO2 from the IGL correction may be because CO2 diffusion cannot keep pace with bubble growth during rapid cooling upon eruption. Mass balance calculations indicate that a minute amount of carbonate, which could escape detection by Raman, would affect CO2 content, providing an explanation for low values of CO2 determined by RA. The discrepancy in the BG results might relate to diffusive loss of H+ and uncertainties (e.g., temperature) involved with the calculation. Thus, homogenization via heating has advantages over other techniques in constituting the CO2 of inclusions, and may lead to a more accurate computational method.

Prospective evaluation of testing with baked milk to predict safe ingestion of baked milk in unheated milk-allergic children.

PubMed

Kwan, Allison; Asper, Maria; Lavi, Sasson; Lavine, Elana; Hummel, David; Upton, Julia E

2016-01-01

Cow's milk allergy is one of the most common food allergies affecting young children. A subset of milk-allergic individuals can eat baked milk without allergic symptoms which is beneficial in terms of prognostication and liberalization of the diet. A retrospective study suggested that skin prick testing (SPT) with a baked milk (muffin) slurry may provide a sensitive means of predicting the outcome of a medically supervised baked milk oral food challenge. We evaluated the predictive value of SPT with baked milk to identify unheated milk-allergic children who are able to safely eat baked milk. Children aged 2-16 years with a prior history of reaction to milk and a milk extract SPT of 8-14 mm were recruited. Investigator-blinded SPT to muffin slurry and powdered milk in triplicate and specific IgE (sIgE) to casein and milk were performed. Graded oral challenge to egg-free baked milk muffins (total 2.6 gm milk protein) was performed in the hospital. Reliability of tests was analyzed for intraclass correlation. Statistical significance for clinical characteristics of population and muffin testing versus baked milk reactivity was calculated with Fisher exact test for dichotomous and t-test for continuous variables. Wilcoxon rank sum test was used to compare immunological characteristics between individuals who tolerated or reacted to baked milk. Fitted predicted probability curves and ROC curves were generated. Thirty-eight children were consented and 30 met study criteria. The muffin SPT and casein sIgE were significantly different in those who passed versus failed baked milk challenge. Negative (<3 mm) baked milk tests were found in 8/30 children (27 %) and were associated with non-reactivity to baked milk (p = 0.01) with a sensitivity of 1 (0.70-1.00). All children with negative SPT for baked milk passed the oral challenge. Specificity was 0.41 (0.19-0.67). The optimal decision point for the muffin SPT was 4 mm and the casein sIgE was 6 kU/L. The powdered milk test was not helpful. Skin prick testing with a baked milk (muffin) slurry may have a role in clinical practice to identify baked milk tolerance in milk-allergic patients.

The dynamics of oceanic fronts. I - The Gulf Stream

NASA Technical Reports Server (NTRS)

Kao, T. W.

1980-01-01

The establishment and maintenance of the mean hydrographic properties of large-scale density fronts in the upper ocean is considered. The dynamics is studied by posing an initial value problem starting with a near-surface discharge of buoyant water with a prescribed density deficit into an ambient stationary fluid of uniform density; full time dependent diffusion and Navier-Stokes equations are then used with constant eddy diffusion and viscosity coefficients, together with a constant Coriolis parameter. Scaling analysis reveals three independent scales of the problem including the radius of deformation of the inertial length, buoyancy length, and diffusive length scales. The governing equations are then suitably scaled and the resulting normalized equations are shown to depend on the Ekman number alone for problems of oceanic interest. It is concluded that the mean Gulf Stream dynamics can be interpreted in terms of a solution of the Navier-Stokes and diffusion equations, with the cross-stream circulation responsible for the maintenance of the front; this mechanism is suggested for the maintenance of the Gulf Stream dynamics.

Complete mitochondrial genome of the Yellow-spotted skate Okamejei hollandi (Rajiformes: Rajidae).

PubMed

Li, Weidong; Chen, Xiao; Liu, Wenai; Sun, Renjie; Zhou, Haolang

2016-07-01

The complete mitochondrial genome of the Yellow-spotted skate Okamejei hollandi was determined in this study. It is 16,974 bp in length and contains 13 protein-coding genes, two rRNA genes, 22 tRNA genes, and one putative control region. The overall base composition is 30.5% A, 27.8% C, 14.0% G, and 27.8% T. There are 28 bp short intergenic spaces located in 12 gene junctions and 31 bp overlaps located in nine gene junctions in the whole mitogenome. Two start codons (ATG and GTG) and two stop codons (TAG and TAA/T) were used in the protein-coding genes. The lengths of 22 tRNA genes range from 68 (tRNA-Ser2) to 75 (tRNA-Leu1) bp. The origin of L-strand replication (OL) sequence (37 bp) was identified between the tRNA-Asn and tRNA-Cys genes. The control region is 1311 bp in length with high A + T and poor G content.

Telomeric attrition with age and temperature in Eastern mosquitofish ( Gambusia holbrooki)

NASA Astrophysics Data System (ADS)

Rollings, Nicky; Miller, Emily; Olsson, Mats

2014-03-01

Telomeric attrition has repeatedly been found to correlate with the ageing of organisms; however, recent research is increasingly showing that the determinants of attrition dynamics are not well understood. This study examined the relative telomere lengths in Eastern mosquitofish, Gambusia holbrooki, kept at different temperatures and at different ages. Newly born fry were randomly selected for one of four treatment groups: 20, 30, 20-30, and 30-20 °C, where the third and fourth treatment groups were gradually changed from their starting temperature to their final temperature between days 10 and 14. Telomere length was measured, and it was found that length decreased with age and that fish exposed to the 20 °C treatment had significantly shorter telomeres than those that received the 30-20 °C treatment. Telomeric attrition with age agrees with results previously found in studies of telomeres; however, the variation in attrition with temperature was not simply predictable and may be the synergistic effects of temperature and some other factor.

Adjusting First-Term Contract Lengths in the Navy: Implications and Recommendations

DTIC Science & Technology

2013-07-01

1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 6YO 5YO 4YO 3YO 2YO25 Figure 6 shows the average default obligation...obligations for a few 4YO ratings, started in FY11 and has been approved to expand from 4 to 15 ratings in FY13 and FY14 total. Even though we offer some

Logarithmic Sobolev Inequalities on Path Spaces Over Riemannian Manifolds

NASA Astrophysics Data System (ADS)

Hsu, Elton P.

Let Wo(M) be the space of paths of unit time length on a connected, complete Riemannian manifold M such that γ(0) =o, a fixed point on M, and ν the Wiener measure on Wo(M) (the law of Brownian motion on M starting at o).If the Ricci curvature is bounded by c, then the following logarithmic Sobolev inequality holds:

Ballistic Resistance of Body Armor. NIJ Standard-0101.06

DTIC Science & Technology

2008-07-01

49.2 ft ± 3.28 ft) Length to be adjusted to meet velocity accuracy requirements Test Barrel Armor Panel Backing Material Fixture Start Sensor Set...Systems, Testing and Evaluation Amanda Forster, Materials Research Engineer The preparation of this standard was sponsored by the National...manufacturers seek NIJ compliance of their armor to this standard and the armor contains unique materials or forms of construction that may not have

Newtonian Analysis of a Folded Chain Drop

ERIC Educational Resources Information Center

Mungan, Carl E.

2018-01-01

Consider a chain of length L that hangs in a U shape with end A fixed to a rigid support and free end E released from rest starting from the same initial height (call it y = 0) as A. Figure 1 sketches the chain after end E has fallen a distance y. Points O and A are assumed to be close enough to each other and the chain flexible enough that the…

Paraquat and pine trees in east Tennessee. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schnell, R.L.

The Tennessee Valley Authority started a series of 8% Paraquat tests in east Tennessee on shortleaf, Virginia, and loblolly pines in the spring of 1974. In addition to species, also the effects of season of application and the length of time between the completed treatment and the harvest cut is being tested. Wood samples are being analyzed by the Botany Department at the University of Tennessee in Knoxville.

Charge frustration in complex fluids and in electronic systems

NASA Astrophysics Data System (ADS)

Carraro, Carlo

1997-02-01

The idea of charge frustration is applied to describe the properties of such diverse physical systems as oil-water-surfactant mixtures and metal-ammonia solutions. The minimalist charge-frustrated model possesses one energy scale and two length scales. For oil-water-surfactant mixtures, these parameters have been determined starting from the microscopic properties of the physical systems under study. Thus, microscopic properties are successfully related to the observed mesoscopic structure.

Crystal Structure of the CTP1L Endolysin Reveals How Its Activity Is Regulated by a Secondary Translation Product*

PubMed Central

Dunne, Matthew; Leicht, Stefan; Krichel, Boris; Thompson, Andrew; Gómez-Torres, Natalia; Garde, Sonia; Narbad, Arjan; Mayer, Melinda J.

2016-01-01

Bacteriophages produce endolysins, which lyse the bacterial host cell to release newly produced virions. The timing of lysis is regulated and is thought to involve the activation of a molecular switch. We present a crystal structure of the activated endolysin CTP1L that targets Clostridium tyrobutyricum, consisting of a complex between the full-length protein and an N-terminally truncated C-terminal cell wall binding domain (CBD). The truncated CBD is produced through an internal translation start site within the endolysin gene. Mutants affecting the internal translation site change the oligomeric state of the endolysin and reduce lytic activity. The activity can be modulated by reconstitution of the full-length endolysin-CBD complex with free CBD. The same oligomerization mechanism applies to the CD27L endolysin that targets Clostridium difficile and the CS74L endolysin that targets Clostridium sporogenes. When the CTP1L endolysin gene is introduced into the commensal bacterium Lactococcus lactis, the truncated CBD is also produced, showing that the alternative start codon can be used in other bacterial species. The identification of a translational switch affecting oligomerization presented here has implications for the design of effective endolysins for the treatment of bacterial infections. PMID:26683375

Effects of climate change on spring wheat phenophase and water requirement in Heihe River basin, China

NASA Astrophysics Data System (ADS)

Han, Dongmei; Yan, Denghua; Xu, Xinyi; Gao, Yu

2017-02-01

Climate change has significantly altered the temperature rhythm which is a key factor for the growth and phenophase of the crop. And temperature change further affects crop water requirement and irrigation system. In the north-west of China, one of the most important crop production bases is Heihe River basin where the observed phenological data is scarce. This study thus first adopted accumulated temperature threshold (ATT) method to define the phenological stages of the crop, and analysed the effect of climate change on phenological stages and water requirement of the crop during growing season. The results indicated the ATT was available for the determination of spring wheat phenological stages. The start dates of all phenological stages became earlier and the growing season length (days) was reduced by 7 days under climate change. During the growing season, water requirement without consideration of phenophase change has been increased by 26.1 mm, while that with consideration of phenophase change was featured in the decrease of water requirement by 50 mm. When temperature increased by 1°C on average, the changes were featured in the 2 days early start date of growing season, 2 days decrease of growing season length, and the 1.4 mm increase of water requirement, respectively.

The Association Between Parental Mean Length of Utterance and Language Outcomes in Children With Disabilities: A Correlational Meta-Analysis.

PubMed

Sandbank, Micheal; Yoder, Paul

2016-05-01

The purpose of this correlational meta-analysis was to examine the association between parental utterance length and language outcomes in children with disabilities and whether this association varies according to other child characteristics, such as age and disability type. This association can serve as a starting point for language intervention practices for children with disabilities. We conducted a systematic search of 42 electronic databases to identify relevant studies. Twelve studies reporting on a total of 13 populations (including 257 participants) were identified. A random-effects model was used to estimate a combined effect size across all studies as well as separate effect sizes across studies in each disability category. The combined effect size across all studies suggests a weak positive association between parental input length and child language outcomes. However, subgroup analyses within disability categories suggest that this association may differ for children with autism. Results of 4 studies including 47 children with autism show that parental input length is strongly associated with positive language outcomes in this population. Present evidence suggests that clinicians should reconsider intervention practices that prescribe shorter, grammatically incomplete utterances, particularly when working with children with autism.

HEAT TRANSFER FROM SURFACES OF NON-UNIFORM TEMPERATURE DISTRIBUTION. PART II. TURBULENT TRANSFER FROM ISOTHERMAL SPANWISE STRIPS ON A FLAT PLATE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sogin, H.H.; Goldstein, R.J.

1960-02-01

Experiments were performed on mass transfer by forced convection from naphthalene strips on a flat plate to an air stream at ordinary temperature and pressure. Turbulence was induced in the boundary layer by means of a wire strip. In all cases there was a hydrodynamic starting length upstream of the strips. The ratio of this inert length to the total length was varied from about 0.80 to 0.96. The flow was practically incompressible with Reynolds number, based on the total length, varying from 175,000 to 486,000. The Schmidt number was 2.5. The experimental results fell in proximity to the Sebanmore » step function factor when they were reduced after the massmomentum analysis of Deissler and Loeffler for a surface of uniform vapor pressure. When Karman's formulation of the mass- momentum analogy was assumed, the data fell between the values predicted by the Seban and by the Rubesin expression for the step function factor. The results were well correlated by the Colburn analogy in conjunction with the Rubesin step function factor. (auth)« less

Do Atmospheric Circulation Patterns Explain Variability and Trends in The Seasonality of Oulu-Hailuoto Ice Road in Northern Finland?

NASA Astrophysics Data System (ADS)

Ahmadi, B.; Kiani, S.; Irannezhad, M.; Ronkanen, A. K.; Kløve, B.; Moradkhani, H.

2016-12-01

In cold climate regions, ice roads are engineered as temporary winter transportation routes on the frozen seas, lakes and rivers. The ice road season parameters (start, end and length) are principally dependent on the thickness of ice, which is naturally controlled by temperature in terms of freezing (FDDs) and thawing (TDDs) degree-days. It has been shown that the variations in FDDs and TDDs are influenced by large-scale atmospheric circulation patterns (ACPs). Therefore, this study aims at understanding the role of ACPs in variability and trends in the seasonality of Oulu-Hailuoto ice road in northern Finland during 1974-2009. The Mann-Kendall nonparametric trend test determined significant shortening in the length of ice road season over the study period of 1974-2009, which can be attributed to later start and earlier end days. In the study area, the maximum ice thickness of the Baltic Sea also showed significant declines over time. Such sea ice thinning can be associated with the wintertime temperature warming manifested by the decreasing trend found in the cumulative FDD during October-January in the water year (September-August). The increased cumulative TDD during February-April also reflects warmer climate in spring, which has resulted in the earlier end day of the ice road season. Measuring the Spearman's rank correlation identified the Arctic Oscillation as the most significant ACP influencing variations in the cumulative FDD, and accordingly in the ice thickness and the start day. However, the cumulative TDD during February-April shows significant positive correlation with the East Atlantic (EA) pattern, which appears to control the end day of the Oulu-Hailuoto ice road season.

Monitoring Spatial Patterns of Vegetation Phenology in AN Australian Tropical Transect Using Modis Evi

NASA Astrophysics Data System (ADS)

Ma, X.; Huete, A.; Yu, Q.; Davies, K.; Coupe, N. R.

2012-07-01

Phenology is receiving increasing interest in the area of climate change and vegetation adaptation to climate. The phenology of a landscape can be used as a key parameter in land surface models and dynamic global vegetation models to more accurately simulate carbon, water and energy exchanges between land cover and atmosphere. However, the characterisation of phenology is lacking in tropical savannas which cover more than 30% of global land area, and are highly vulnerable to climate change. The objective of this study is to investigate the spatial pattern of vegetation phenology along the Northern Australia Tropical Transect (NATT) where the major biomes are wet and dry tropical savannas. For this analysis we used more than 11 years Moderate Resolution Imaging Spectroradiometer (MODIS) Enhanced Vegetation Index (EVI) product from 2000 to 2011. Eight phenological metrics were derived: Start of Season (SOS), End of Season (EOS), Length of Season (LOS), Maximum EVI (MaxG), Minimum EVI (MinG), annual amplitude (AMP), large integral (LIG), and small integral (SIG) were generated for each year and each pixel. Our results showed there are significant spatial patterns and considerable interannual variations of vegetation phenology along the NATT study area. Generally speaking, vegetation growing season started and ended earlier in the north, and started and ended later in the south, resulting in a southward decrease of growing season length (LOS). Vegetation productivity, which was represented by annual integral EVI (LIG), showed a significant descending trend from the northern part of NATT to the southern part. Segmented regression analysis showed that there exists a distinguishable breakpoint along the latitudinal gradient, at least in terms of annual minimum EVI (EVI), which is located between 18.84°S to 20.04°S.

Fine mapping and identification of a novel locus qGL12.2 control grain length in wild rice (Oryza rufipogon Griff.).

PubMed

Qi, Lan; Ding, Yingbin; Zheng, Xiaoming; Xu, Rui; Zhang, Lizhen; Wang, Yanyan; Wang, Xiaoning; Zhang, Lifang; Cheng, Yunlian; Qiao, Weihua; Yang, Qingwen

2018-04-19

A wild rice QTL qGL12.2 for grain length was fine mapped to an 82-kb interval in chromosome 12 containing six candidate genes and none was reported previously. Grain length is an important trait for yield and commercial value in rice. Wild rice seeds have a very slender shape and have many desirable genes that have been lost in cultivated rice during domestication. In this study, we identified a quantitative trait locus, qGL12.2, which controls grain length in wild rice. First, a wild rice chromosome segment substitution line, CSSL41, was selected that has longer glume and grains than does the Oryza sativa indica cultivar, 9311. Next, an F 2 population was constructed from a cross between CSSL41 and 9311. Using the next-generation sequencing combined with bulked-segregant analysis and F 3 recombinants analysis, qGL12.2 was finally fine mapped to an 82-kb interval in chromosome 12. Six candidate genes were found, and no reported grain length genes were found in this interval. Using scanning electron microscopy, we found that CSSL41 cells are significantly longer than those of 9311, but there is no difference in cell widths. These data suggest that qGL12.2 is a novel gene that controls grain cell length in wild rice. Our study provides a new genetic resource for rice breeding and a starting point for functional characterization of the wild rice GL gene.

Weight, Length, and Body Mass Index Growth of Children Under 2 Years of Age With Cleft Lip and Palate.

PubMed

Miranda, Gabriela Serrano; Marques, Ilza Lazarini; de Barros, Suely Prietto; Arena, Eliane Petean; de Souza, Luiz

2016-05-01

To study the growth of length-for-age (L/A), weight-for-age (W/A), and body mass index (BMI) of children with cleft lip and palate receiving a normal diet; to establish specific growth curves for children with cleft palate with or without cleft lip (CLP/ICP) who had not undergone palatoplasty and for children with isolated cleft lip (ICL); and to assess if CLP/ICP growth differed from ICL growth and if CLP/ICP and ICL growth differed from growth for typical children. Prospective and cross-sectional study. Hospital for Rehabilitation of Craniofacial Anomalies, Bauru, São Paulo, Brazil. Weight and length of 381 children with cleft lip and palate and who were younger than 2 years were recorded and used to calculate W/A, L/A, and BMI growth curves. The 2006 World Health Organization growth charts were used as a reference for typical children. All children received a normal diet for age. Children with CLP/ICP had median W/A and BMI growth curves below growth curves for typical children but showed spontaneous recovery starting at approximately 5 months of age, even with nonoperated cleft palate. Children with ICL had growth similar to that of typical children. Children with CLP/ICP, who initially had W/A and BMI values less than those of the ICL group, had W/A and BMI equal to or higher than the ICL group after 9 months of age. Children with CLP/ICP had impaired W/A and BMI growth with spontaneous recovery starting early in childhood. This study established specific W/A, BMI, and L/A growth curves for children with cleft lip and palate.

Preliminary experience using dynamic MRI at 3.0 Tesla for evaluation of soft tissue tumors.

PubMed

Park, Michael Yong; Jee, Won-Hee; Kim, Sun Ki; Lee, So-Yeon; Jung, Joon-Yong

2013-01-01

We aimed to evaluate the use of dynamic contrast enhanced magnetic resonance imaging (DCE-MRI) at 3.0 T for differentiating the benign from malignant soft tissue tumors. Also we aimed to assess whether the shorter length of DCE-MRI protocols are adequate, and to evaluate the effect of temporal resolution. Dynamic contrast-enhanced magnetic resonance imaging, at 3.0 T with a 1 second temporal resolution in 13 patients with pathologically confirmed soft tissue tumors, was analyzed. Visual assessment of time-signal curves, subtraction images, maximal relative enhancement at the first (maximal peak enhancement [Emax]/1) and second (Emax/2) minutes, Emax, steepest slope calculated by using various time intervals (5, 30, 60 seconds), and the start of dynamic enhancement were analyzed. The 13 tumors were comprised of seven benign and six malignant soft tissue neoplasms. Washout on time-signal curves was seen on three (50%) malignant tumors and one (14%) benign one. The most discriminating DCE-MRI parameter was the steepest slope calculated, by using at 5-second intervals, followed by Emax/1 and Emax/2. All of the steepest slope values occurred within 2 minutes of the dynamic study. Start of dynamic enhancement did not show a significant difference, but no malignant tumor rendered a value greater than 14 seconds. The steepest slope and early relative enhancement have the potential for differentiating benign from malignant soft tissue tumors. Short-length rather than long-length DCE-MRI protocol may be adequate for our purpose. The steepest slope parameters require a short temporal resolution, while maximal peak enhancement parameter may be more optimal for a longer temporal resolution.

Effects of growth hormone on body proportions in Turner syndrome compared with non-treated patients and normal women.

PubMed

Baldin, A D; Fabbri, T; Siviero-Miachon, A A; Spinola-Castro, A M; Lemos-Marini, S H V; Baptista, M T M; D'Souza-Li, L F R; Maciel-Guerra, A T; Guerra, G

2010-11-01

The majority of anthropometric assessments in Turner syndrome (TS) patients has focused on height. To analyze body proportions in young adult TS patients either treated or not treated with rhGH, and to compare them with a group of age-matched healthy women. Standing height, sitting height, weight, foot and leg lengths, arm span, head circumference, biliac and biacromial diameters were measured in 52 non-treated TS patients, 30 treated with rhGH and 133 healthy women. Age at the start of rhGH therapy varied from 7.8 to 15.1 yr (10.0±1.3 yr), the duration of treatment from 2.8 to 8.2 yr (3.7±1.5 yr) and the mean recombinant human GH (rhGH) dose was 0.42 mg/kg/week (from 0.32 to 0.50 mg/kg/week). Nontreated patients did not show any difference in anthropometric variables when compared with the treated ones, except for hand length (p=0.02) and height (p=0.05), which were increased in the treated group. All anthropometric variables, except head circumference, were different when comparing TS patients (either treated or not) with age-matched healthy women. Brazilian TS patients either treated or not with rhGH showed almost no differences in terms of their body proportions. This result is probably due to the late age at the start of treatment, and/or the short period of rhGH administration. Hand length was different between the groups, showing the importance of including the extremities in body proportion assessment during rhGH treatment of TS patients.

Ecotypic differences in the phenology of the tundra species Eriophorum vaginatum reflect sites of origin.

PubMed

Parker, Thomas C; Tang, Jianwu; Clark, Mahalia B; Moody, Michael M; Fetcher, Ned

2017-11-01

Eriophorum vaginatum is a tussock-forming sedge that contributes significantly to the structure and primary productivity of moist acidic tussock tundra. Locally adapted populations (ecotypes) have been identified across the geographical distribution of E. vaginatum ; however, little is known about how their growth and phenology differ over the course of a growing season. The growing season is short in the Arctic and therefore exerts a strong selection pressure on tundra species. This raises the hypothesis that the phenology of arctic species may be poorly adapted if the timing and length of the growing season change. Mature E. vaginatum tussocks from across a latitudinal gradient (65-70°N) were transplanted into a common garden at a central location (Toolik Lake, 68°38'N, 149°36'W) where half were warmed using open-top chambers. Over two growing seasons (2015 and 2016), leaf length was measured weekly to track growth rates, timing of senescence, and biomass accumulation. Growth rates were similar across ecotypes and between years and were not affected by warming. However, southern populations accumulated significantly more biomass, largely because they started to senesce later. In 2016, peak biomass and senescence of most populations occurred later than in 2015, probably induced by colder weather at the beginning of the growing season in 2016, which caused a delayed start to growth. The finish was delayed as well. Differences in phenology between populations were largely retained between years, suggesting that the amount of time that these ecotypes grow has been selected by the length of the growing seasons at their respective home sites. As potential growing seasons lengthen, E. vaginatum may be unable to respond appropriately as a result of genetic control and may have reduced fitness in the rapidly warming Arctic tundra.

Profiling the careers of Thoroughbred horses racing in Hong Kong between 2000 and 2010.

PubMed

Velie, B D; Stewart, B D; Lam, K; Wade, C M; Hamilton, N A

2013-11-01

Research in Thoroughbred racehorses is often specific to horses from a given racing population or region. In order to investigate trends in racehorse careers across populations accurately, population-specific benchmarks for performance outcomes must be established. To provide summary statistics for performance outcomes for Thoroughbreds racing in Hong Kong between 2000 and 2010 and to document and provide evidence on the current differences in racing careers across sexes and regions of origin for horses racing in Hong Kong. Performance data on the population of Thoroughbreds racing in Hong Kong between 3 September 2000 and 12 March 2011 (n = 4950) were acquired and used to describe and compare the careers of Thoroughbred racehorses in Hong Kong. Career length, number of career starts and number of spells from racing per year were evaluated. Kaplan-Meier survival curves, stratified by sex, age group, country of origin and region of origin were produced for career length. A Cox's proportional hazards model was fitted to assess factors influencing the risk of retirement from racing in Hong Kong. Log-rank tests for equality of career length survivor functions showed significant differences (P<0.001) across sexes, age groups, countries of origin and regions of origin. An increased age at first start in Hong Kong tended to increase the hazard rate for retirement from racing in Hong Kong, whereas greater earnings per race and originating from Europe tended to reduce the hazard rate for racing retirement. Differences in career outcomes within a racing population appear to be influenced partly by the region from which a horse originates, with specific effects on each performance outcome also varying between regions. Future research should take into account these potential differences when comparing results across populations. © 2013 EVJ Ltd.

Timing the start of division in E. coli: a single-cell study

NASA Astrophysics Data System (ADS)

Reshes, G.; Vanounou, S.; Fishov, I.; Feingold, M.

2008-12-01

We monitor the shape dynamics of individual E. coli cells using time-lapse microscopy together with accurate image analysis. This allows measuring the dynamics of single-cell parameters throughout the cell cycle. In previous work, we have used this approach to characterize the main features of single-cell morphogenesis between successive divisions. Here, we focus on the behavior of the parameters that are related to cell division and study their variation over a population of 30 cells. In particular, we show that the single-cell data for the constriction width dynamics collapse onto a unique curve following appropriate rescaling of the corresponding variables. This suggests the presence of an underlying time scale that determines the rate at which the cell cycle advances in each individual cell. For the case of cell length dynamics a similar rescaling of variables emphasizes the presence of a breakpoint in the growth rate at the time when division starts, τc. We also find that the τc of individual cells is correlated with their generation time, τg, and inversely correlated with the corresponding length at birth, L0. Moreover, the extent of the T-period, τg - τc, is apparently independent of τg. The relations between τc, τg and L0 indicate possible compensation mechanisms that maintain cell length variability at about 10%. Similar behavior was observed for both fast-growing cells in a rich medium (LB) and for slower growth in a minimal medium (M9-glucose). To reveal the molecular mechanisms that lead to the observed organization of the cell cycle, we should further extend our approach to monitor the formation of the divisome.

Athletic performance and career longevity following anterior cruciate ligament reconstruction in the National Basketball Association.

PubMed

Kester, Benjamin S; Behery, Omar A; Minhas, Shobhit V; Hsu, Wellington K

2017-10-01

To identify the impact of anterior cruciate ligament (ACL) reconstruction on performance and career longevity for National Basketball Association (NBA) players. Seventy-nine players (80 knees) with acute ACL tears in the NBA between the 1984-2014 seasons, and 112 age, height, weight, and performance-matched controls were identified. Pre- and post-injury performance outcomes including seasons played, games played, games started, minutes per game, points per game, field goals, 3-point shots, rebounds, assists, steals, blocks, turnovers, personal fouls, usage percentage and player efficiency ratings were compared between cases and controls using independent samples t tests and Fisher's exact tests. Sixty-eight of seventy-nine players (86.1 %) returned to play in the NBA following ACL reconstruction. Mean length of post-operative play was 1.84 years shorter than matched controls (P = 0.001). There was a significantly higher rate of attrition from professional basketball for players with a history of ACL reconstruction (P = 0.014). In the first full season following surgery, players started in 15.5 fewer games (P = 0.001), they played in 17.3 fewer games (P < 0.001), and had combined player efficiency ratings 2.35 points lower (P = 0.001) when compared to matched controls. Over the length of their careers, players competed in 22.2 fewer games per season (P = 0.009). There is a high rate of return to sport in the NBA following ACL reconstruction, although playing time, games played, player efficiency ratings and career lengths are significantly impacted in the post-operative period. These data should be used to manage patients' expectations regarding their abilities to return to elite levels of athletic performance.

Heritability and factors associated with number of harness race starts in the Spanish Trotter horse population.

PubMed

Solé, M; Valera, M; Gómez, M D; Sölkner, J; Molina, A; Mészáros, G

2017-05-01

Longevity/durability is a relevant trait in racehorses. Genetic analysis and knowledge of factors that influence number of harness race starts would be advantageous for both horse welfare and the equine industry. To perform a genetic analysis on harness racing using number of races as a measure of longevity/durability and to identify factors associated with career length in Spanish Trotter Horses (STH). Longitudinal study. Performance data (n = 331,970) on the STH population for harness racing at national level between 1990 and 2014 were used. A grouped data model was fitted to assess factors influencing the risk of ending harness racing career and to estimate the heritability and breeding values for total number of harness races starts as an indicator of horses' longevity and durability. The model included sex, age at first race and first start earnings as time-independent effects, and the calendar year, driver, trainer, racetrack category and season of competition as time-dependent effects. Across the whole dataset, the average number of harness races horses achieved in Spain was 54.7 races, and this was associated with the horses' sex, age at first race and first start earnings, calendar year, driver, racetrack category, and season. The heritability estimated (0.17 ± 0.01) for number of harness race starts indicates that a beneficial response to direct genetic selection can be expected. Data on horses' health status were not available. Horses' total number of harness race starts is a promising tool for genetic analysis and the evaluation of racing longevity and durability. The estimated heritability provides evidence to support the application of genetic selection of total career number of races to improve longevity/durability of STH. © 2016 EVJ Ltd.

The primary cosmic ray electron spectrum from 10 GeV to about 200 GeV

NASA Technical Reports Server (NTRS)

Silverberg, R. F.; Ormes, J. F.; Balasubrahmanyan, V. K.; Ryan, M. J.

1971-01-01

An ionization spectrometer consisting of 10.8 radiation lengths of tungsten and 35 radiation lengths of iron has been used to determine the energy spectrum of cosmic ray electrons above 10 GeV. The spectrometer was calibrated with electrons from 5.4 to 18 GeV and then flown at an altitude of 6 gm-cm/2 for 16 hours. Separation of electron initiated events from proton events was achieved by utilizing starting point distributions, the shower development in tungsten, and the energy deposited in the large thickness of iron absorber. The exponent of the differential energy spectrum of the electrons is -3.1 + or - 0.2 while the exponent of the background is consistent with the proton exponent of -2.7 + or -0.2.

Effect of screening on the transport of polyelectrolytes through nanopores

NASA Astrophysics Data System (ADS)

Oukhaled, G.; Bacri, L.; Mathé, J.; Pelta, J.; Auvray, L.

2008-05-01

We study the transport of dextran sulfate molecules (Mw=8000 Da) through a bacterial α-hemolysin channel inserted into a bilayer lipid membrane submitted to an external electric field. We detect the current blockades induced by the molecules threading through one pore and vary the ionic strength in an unexplored range starting at 10-3 M. In the conditions of the experiment, the polyelectrolyte molecules enter the pore only if the Debye screening length is smaller than the pore radius in agreement with theory. We also observe that large potentials favour the passage of the molecules. The distribution of blockade durations suggests that a complex process governs the kinetics of the molecules. The dwelling time increases sharply as the Debye length increases and approaches the pore radius.

Thermally driven mass flows in the convection zone of the sun

NASA Technical Reports Server (NTRS)

Dijkhuis, G. C.

1973-01-01

A formulation of the fluid dynamics of convective regions is developed which leads to an analytical description of the solar rotation, the Evershed flow, and the supergranulation. The starting point of the present formulation is the mixing length picture of convective equilibrium, but the earlier point mass model for convective molecules is replaced here by a model with both inertia and intrinsic moment of inertia. This extension introduces three rotational degrees of freedom into the dynamics of individual convective molecules, which enter into the dynamical equations for a mixing length fluid in the form of a separate vector field which we term the spin field. It is shown that for convective molecules having a spherically symmetric mass distribution, the spin field is proportional to the local vorticity.

Virtual Long Baseline (VLBL) Autonomous Underwater Vehicle Navigation Using a Single Transponder

DTIC Science & Technology

2006-06-01

is needed from the lbl structure for the % indicated time range lbl_sb = sext (lbl,find(lbl.t > Start_Time & lbl.t < End_Time...Take only the lbl data points from the chosen transponder which % correspond to status 5, which means good data lbl_SB = sext (lbl_sb,find...i)); L = length(Time); % Extract the data which is needed from the state structure state_SB = sext (state,find(state.t

Severe malformations of eelpout (Zoarces viviparus) fry are induced by maternal estrogenic exposure during early embryogenesis.

PubMed

Morthorst, Jane E; Korsgaard, Bodil; Bjerregaard, Poul

2016-02-01

Pregnant eelpout were exposed via the water to known endocrine disrupting compounds (EDCs) to clarify if EDCs could be causing the increased eelpout fry malformation frequencies observed in coastal areas receiving high anthropogenic input. The presence of a teratogenic window for estrogen-induced malformations was also investigated by starting the exposure at different times during eelpout pregnancy. Both 17α-ethinylestradiol (EE2) (17.8 ng/L) and pyrene (0.5 μg/L) significantly increased fry malformation frequency whereas 4-t-octylphenol (4-t-OP) up to 14.3 μg/L did not. Vitellogenin was significantly induced by EE2 (5.7 and 17.8 ng/L) but not by 4-t-OP and pyrene. A critical period for estrogen-induced fry malformations was identified and closed between 14 and 22 days post fertilization (dpf). Exposure to 17β-estradiol (E2) between 0 and 14 dpf caused severe malformations and severity increased the closer exposure start was to fertilization, whereas malformations were absent by exposure starting later than 14 dpf. Data on ovarian fluid volume and larval length supported the suggested teratogenic window. Larval mortality also increased when exposure started right after fertilization. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reported consent processes and demographics: a substudy of the INSIGHT Strategic Timing of AntiRetroviral Treatment trial

PubMed Central

Denning, Eileen; Sharma, Shweta; Smolskis, Mary; Touloumi, Giota; Walker, Sarah; Babiker, Abdel; Clewett, Megan; Emanuel, Ezekiel; Florence, Eric; Papadopoulos, Antonios; Sánchez, Adriana; Tavel, Jorge; Grady, Christine

2014-01-01

Objectives Efforts are needed to improve informed consent of participants in research. The Strategic Timing of AntiRetroviral Therapy (START) study provides a unique opportunity to study the effect of length and complexity of informed consent documents on understanding and satisfaction among geographically diverse participants. Methods Interested START sites were randomised to use either the standard consent form or the concise consent form for all of the site’s participants. Results A total of 4473 HIV-positive participants at 154 sites worldwide took part in the Informed Consent Substudy, with consent given in 11 primary languages. Most sites sent written information to potential participants in advance of clinic visits, usually including the consent form. At about half the sites, staff reported spending less than an hour per participant in the consent process. The vast majority of sites assessed participant understanding using informal nonspecific questions or clinical judgment. Conclusions These data reflect the interest of START research staff in evaluating the consent process and improving informed consent. The START Informed Consent Substudy is by far the largest study of informed consent intervention ever conducted. Its results have the potential to impact how consent forms are written around the world. PMID:25711320

Phenological research of climate changes in the north part of Lithuania by the phenological garden of Šiauliai University.

PubMed

Klimienė, Asta; Vainorienė, Rimanta; Klimas, Ramutis

2017-02-01

Šiauliai University Botanical Garden is a member of the International Phenological Garden network since 2005. It is the only one botanical garden in the East Europe that participated in the programme. In 2015, 18 species were observed. For research, data of 14 plants was used. The aim of this study is to estimate the responsiveness of the species of plants of the phenological garden to annual and monthly precipitation and temperature of the air. The main variables in this investigation were growing season length and the beginning of the growing season. In the period 2006-2015, the lowest annual air temperature was in 2010 (6.0 °C), and the highest was in 2015 (8.9 °C). The lowest precipitation was in 2015 (37.3 mm), and the highest was in 2012 (63.5 mm). The leanest regression among growing length, average annual precipitation, and air temperature showed that statistically significant correlation between growing length and average annual air temperature was found for nine plants, between growing length and precipitation was found for three plants, and between growing length and both factors was found for one plant, Salix smithiana, only. Due to the short evaluating period (2007-2015), consistent regression of the length of the growing season could not be found. The growing length of Betula pubescens sequentially increased. The average growing season of 14 plants starts on April 27 (±3), but for Corylus avellana, it is on April 26 (±3). Longevity of the growing season was the most related with precipitation for C. avellana in summer, autumn, and winter and with air temperature, Ribes alpinum and Salix acutifolia in summer and in autumn.

Chlorination by-products in drinking water and menstrual cycle function.

PubMed

Windham, Gayle C; Waller, Kirsten; Anderson, Meredith; Fenster, Laura; Mendola, Pauline; Swan, Shanna

2003-06-01

We analyzed data from a prospective study of menstrual cycle function and early pregnancy loss to explore further the effects of trihalomethanes (THM) on reproductive end points. Premenopausal women ((italic)n(/italic) = 403) collected urine samples daily during an average of 5.6 cycles for measurement of steroid metabolites that were used to define menstrual parameters such as cycle and phase length. Women were asked about consumption of various types of water as well as other habits and demographics. A THM level was estimated for each cycle based on residence and quarterly measurements made by water utilities during a 90-day period beginning 60 days before the cycle start date. We found a monotonic decrease in mean cycle length with increasing total THM (TTHM) level; at > 60 microg/L, the adjusted decrement was 1.1 days [95% confidence interval (CI), -1.8 to -0.40], compared with less than or equal to 40 microg/L. This finding was also reflected as a reduced follicular phase length (difference -0.94 day; 95% CI, -1.6 to -0.24). A decrement in cycle and follicular phase length of 0.18 days (95% CI, -0.29 to -0.07) per 10 microg/L unit increase in TTHM concentration was found. There was little association with luteal phase length, menses length, or cycle variability. Examining the individual THMs by quartile, we found the greatest association with chlorodibromomethane or the sum of the brominated compounds. Incorporating tap water consumption showed a similar pattern of reduced cycle length with increasing TTHM exposure. These findings suggest that THM exposure may affect ovarian function and should be confirmed in other studies.

A fully covariant information-theoretic ultraviolet cutoff for scalar fields in expanding Friedmann Robertson Walker spacetimes

NASA Astrophysics Data System (ADS)

Kempf, A.; Chatwin-Davies, A.; Martin, R. T. W.

2013-02-01

While a natural ultraviolet cutoff, presumably at the Planck length, is widely assumed to exist in nature, it is nontrivial to implement a minimum length scale covariantly. This is because the presence of a fixed minimum length needs to be reconciled with the ability of Lorentz transformations to contract lengths. In this paper, we implement a fully covariant Planck scale cutoff by cutting off the spectrum of the d'Alembertian. In this scenario, consistent with Lorentz contractions, wavelengths that are arbitrarily smaller than the Planck length continue to exist. However, the dynamics of modes of wavelengths that are significantly smaller than the Planck length possess a very small bandwidth. This has the effect of freezing the dynamics of such modes. While both wavelengths and bandwidths are frame dependent, Lorentz contraction and time dilation conspire to make the freezing of modes of trans-Planckian wavelengths covariant. In particular, we show that this ultraviolet cutoff can be implemented covariantly also in curved spacetimes. We focus on Friedmann Robertson Walker spacetimes and their much-discussed trans-Planckian question: The physical wavelength of each comoving mode was smaller than the Planck scale at sufficiently early times. What was the mode's dynamics then? Here, we show that in the presence of the covariant UV cutoff, the dynamical bandwidth of a comoving mode is essentially zero up until its physical wavelength starts exceeding the Planck length. In particular, we show that under general assumptions, the number of dynamical degrees of freedom of each comoving mode all the way up to some arbitrary finite time is actually finite. Our results also open the way to calculating the impact of this natural UV cutoff on inflationary predictions for the cosmic microwave background.

A Robotic Fish to Emulate the Fast-Start

NASA Astrophysics Data System (ADS)

Currier, Todd; Ma, Ganzhong; Modarres-Sadeghi, Yahya

2017-11-01

An experimental study is conducted on a robotic fish designed to emulate the fast-start response. The fish body is constructed of 3D printed ribs and a light spring steel spine. The body is actuated using a series of pressured pistons. A total of four pistons are supplied with pressure through lightweight high pressure service lines. The source of pressure is carbon dioxide with a 700 psi peak operating pressure resulting in a body response that can cycle a c-start maneuver in milliseconds. The motion of the fish is precisely controlled through the use of solenoids with a control signal produced by a programmable microprocessor. The fish is constrained in all translational degrees of freedom but allowed to rotate about a vertical axis. The influence of the point of rotation is studied with different mounting points along the length of the head of the fish. The forces are measured in two perpendicular in-plane directions. A high speed camera is used to capture the response of the fish and the corresponding flow around it. Comparison is made with the kinematics observed in live fish.

Association Fields via Cuspless Sub-Riemannian Geodesics in SE(2).

PubMed

Duits, R; Boscain, U; Rossi, F; Sachkov, Y

To model association fields that underly perceptional organization (gestalt) in psychophysics we consider the problem P curve of minimizing [Formula: see text] for a planar curve having fixed initial and final positions and directions. Here κ ( s ) is the curvature of the curve with free total length ℓ . This problem comes from a model of geometry of vision due to Petitot (in J. Physiol. Paris 97:265-309, 2003; Math. Inf. Sci. Humaines 145:5-101, 1999), and Citti & Sarti (in J. Math. Imaging Vis. 24(3):307-326, 2006). In previous work we proved that the range [Formula: see text] of the exponential map of the underlying geometric problem formulated on SE(2) consists of precisely those end-conditions ( x fin , y fin , θ fin ) that can be connected by a globally minimizing geodesic starting at the origin ( x in , y in , θ in )=(0,0,0). From the applied imaging point of view it is relevant to analyze the sub-Riemannian geodesics and [Formula: see text] in detail. In this article we show that [Formula: see text] is contained in half space x ≥0 and (0, y fin )≠(0,0) is reached with angle π ,show that the boundary [Formula: see text] consists of endpoints of minimizers either starting or ending in a cusp,analyze and plot the cones of reachable angles θ fin per spatial endpoint ( x fin , y fin ),relate the endings of association fields to [Formula: see text] and compute the length towards a cusp,analyze the exponential map both with the common arc-length parametrization t in the sub-Riemannian manifold [Formula: see text] and with spatial arc-length parametrization s in the plane [Formula: see text]. Surprisingly, s -parametrization simplifies the exponential map, the curvature formulas, the cusp-surface, and the boundary value problem,present a novel efficient algorithm solving the boundary value problem,show that sub-Riemannian geodesics solve Petitot's circle bundle model (cf. Petitot in J. Physiol. Paris 97:265-309, [2003]),show a clear similarity with association field lines and sub-Riemannian geodesics.

Evaluation of the Effectiveness of Two Morphine Protocols to Treat Neonatal Abstinence Syndrome in a Level II Nursery in a Community Hospital.

PubMed

DeAtley, Heather N; Burton, Amanda; Fraley, Michelle DeLuca; Haltom, Joan

2017-07-01

The authors sought to evaluate the impact on length of hospital stay and treatment duration of morphine after implementation of a change in the institutional protocol for managing neonatal abstinence syndrome (NAS) in an effort to improve patient outcomes. A single-center, retrospective chart review was conducted at a Level II nursery in a community hospital in Kentucky. Fifty-nine neonates born between January 1, 2014, and December 31, 2015, who were diagnosed with NAS and received morphine for treatment were included. The protocol 1 group consisted of 33 neonates who received an initial dose of morphine 0.04 mg/kg/dose administered orally every 4 hours (January 1-December 31, 2014), and the protocol 2 group consisted of 26 neonates who received an initial dose of morphine 0.06 mg/kg/dose administered orally every 3 hours (January 1-November 30, 2015), after a change in the protocol for managing NAS was implemented on January 1, 2015. Data were reviewed and compared between the two protocol groups to determine the impact that the dosage change had on length of hospital stay and morphine treatment duration. The average length of stay decreased by 7 days in the protocol 2 group compared with the protocol 1 group (21 vs 28.65 days). The average duration of treatment decreased by 7 days in the protocol 2 group compared with the protocol 1 group (18.3 vs 25.4 days). These differences between groups were not statistically significant, however, because the population size was not large enough to achieve adequate power. These results indicate that protocol 2 displayed the potential to decrease length of stay and duration of treatment compared with protocol 1 at this facility; however, balancing higher starting doses with the risk of oversedation will continue to challenge the health care team. Concern for oversedation when using the higher starting dose in protocol 2 has prompted further research (e.g., protocol 3, initial morphine 0.05 mg/kg/dose every 3 hrs). Continued research is also necessary with larger patient populations to enable generalizability to other institutions. © 2017 Pharmacotherapy Publications, Inc.

Multiple bottlenecks in hierarchical control of action sequences: what does "response selection" select in skilled typewriting?

PubMed

Yamaguchi, Motonori; Logan, Gordon D; Li, Vanessa

2013-08-01

Does response selection select words or letters in skilled typewriting? Typing performance involves hierarchically organized control processes: an outer loop that controls word level processing, and an inner loop that controls letter (or keystroke) level processing. The present study addressed whether response selection occurs in the outer loop or the inner loop by using the psychological refractory period (PRP) paradigm in which Task1 required typing single words and Task2 required vocal responses to tones. The number of letters (string length) in the words was manipulated to discriminate selection of words from selection of keystrokes. In Experiment 1, the PRP effect depended on string length of words in Task1, suggesting that response selection occurs in the inner loop. To assess contributions of the outer loop, the influence of string length was examined in a lexical-decision task that also involves word encoding and lexical access (Experiment 2), or to-be-typed words were preexposed so outer-loop processing could finish before typing started (Experiment 3). Response time for Task2 (RT2) did not depend on string length with lexical decision, and RT2 still depended on string length with typing preexposed strings. These results support the inner-loop locus of the PRP effect. In Experiment 4, typing was performed as Task2, and the effect of string length on typing RT interacted with stimulus onset asynchrony superadditively, implying that another bottleneck also exists in the outer loop. We conclude that there are at least two bottleneck processes in skilled typewriting. 2013 APA, all rights reserved

Stimulation of respiratory changes in alae nasi length by chemoreceptor activation.

PubMed

Van Lunteren, E; Haxhiu, M A; Cherniack, N S

1986-03-01

Respiratory-related changes in length of the nasal dilator muscle, the alae nasi muscle, were measured using sonomicrometry in ten anesthetized (pentobarbital), tracheostomized, spontaneously breathing dogs. Piezoelectric crystals were inserted 7-25 mm apart along the direction of the alae nasi muscle fibers, and the effects of progressive hyperoxic hypercapnia and a peripheral and central chemoreceptor stimulant, nicotine (10-500 micrograms intravenously), were ascertained. The alae nasi shortened during inspiration in all animals, started to lengthen again towards the end of inspiration, returned to resting length during the first portion of expiration (Te-1), and remained at resting length for the remainder of expiration (Te-2). The amount of alae nasi inspiratory shortening was increased by occluding the airway for a single breath. Progressive hypercapnia caused progressive increases in the amount and velocity of nasal muscle inspiratory shortening during both unoccluded and occluded breaths; similar stimulatory effects on inspiratory shortening were seen following nicotine administration. Furthermore, both chemoreceptor stimulants caused a delay in the return of the muscle to its resting length during expiration, resulting in a significant increase in Te-1 relative to Te (Te-1/Te), and a greater amount of nasal muscle shortening to be present during Te-1. In some animals these agents also caused tonic shortening of the alae nasi, so that the muscle never returned to its resting length. These results suggest that inspiratory shortening of the alae nasi is inhibited by vagal inputs, but that chemoreceptor activation increases the amount of muscle shortening during both inspiration and early expiration.

Isolation and Characterization of Two Proteins from Moraxella catarrhalis That Bear a Common Epitope

PubMed Central

McMichael, John C.; Fiske, Michael J.; Fredenburg, Ross A.; Chakravarti, Deb N.; VanDerMeid, Karl R.; Barniak, Vicki; Caplan, Jeffrey; Bortell, Eric; Baker, Steven; Arumugham, Rasappa; Chen, Dexiang

1998-01-01

The UspA1 and UspA2 proteins of Moraxella catarrhalis are potential vaccine candidates for preventing disease caused by this organism. We have characterized both proteins and evaluated their vaccine potential using both in vitro and in vivo assays. Both proteins were purified from the O35E isolate by Triton X-100 extraction, followed by ion-exchange and hydroxyapatite chromatography. Analysis of the sequences of internal peptides, prepared by enzymatic and chemical cleavage of the proteins, revealed that UspA1 and UspA2 exhibited distinct structural differences but shared a common sequence including an epitope recognized by the monoclonal antibody 17C7. By sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), purified UspA1 exhibited a molecular weight of approximately 350,000 when unheated and a molecular weight of 100,000 after being heated for 10 min at 100°C. In contrast, purified UspA2 exhibited an apparent molecular weight of 240,000 by SDS-PAGE that did not change with the length of time of heating. Their sizes as determined by gel filtration were 1,150,000 and 830,000 for UspA1 and UspA2, respectively. Preliminary results indicate the proteins have separate functions in bacterial pathogenesis. Purified UspA1 was found to bind HEp-2 cells, and sera against UspA1, but not against UspA2, blocked binding of the O35E isolate to the HEp-2 cells. UspA1 also bound fibronectin and appears to have a role in bacterial attachment. Purified UspA2, however, did not bind fibronectin but had an affinity for vitronectin. Both proteins elicited bactericidal antibodies in mice to homologous and heterologous disease isolates. Finally, mice immunized with each of the proteins, followed by pulmonary challenge with either the homologous or a heterologous isolate, cleared the bacteria more rapidly than mock-immunized mice. These results suggest that UspA1 and UspA2 serve different virulence functions and that both are promising vaccine candidates. PMID:9712790

A model of heat transfer in sapwood and implications for sap flux density measurements using thermal dissipation probes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wullschleger, Stan D; Childs, Kenneth W; King, Anthony Wayne

2011-01-01

A variety of thermal approaches are used to estimate sap flux density in stems of woody plants. Models have proven valuable tools for interpreting the behavior of heat pulse, heat balance, and heat field deformation techniques, but have seldom been used to describe heat transfer dynamics for the heat dissipation method. Therefore, to better understand the behavior of heat dissipation probes, a model was developed that takes into account the thermal properties of wood, the physical dimensions and thermal characteristics of the probes, and the conductive and convective heat transfer that occurs due to water flow in the sapwood. Probesmore » were simulated as aluminum tubes 20 mm in length and 2 mm in diameter, whereas sapwood, heartwood, and bark each had a density and water fraction that determined their thermal properties. Base simulations assumed a constant sap flux density with sapwood depth and no wounding or physical disruption of xylem beyond the 2 mm diameter hole drilled for probe installation. Simulations across a range of sap flux densities showed that the dimensionless quantity k defined as ( Tm T)/ T where Tm is the temperature differential ( T) between the heated and unheated probe under zero flow conditions was dependent on the thermal conductivity of the sapwood. The relationship between sap flux density and k was also sensitive to radial gradients in sap flux density and to xylem disruption near the probe. Monte Carlo analysis in which 1000 simulations were conducted while simultaneously varying thermal conductivity and wound diameter revealed that sap flux density and k showed considerable departure from the original calibration equation used with this technique. The departure was greatest for abrupt patterns of radial variation typical of ring-porous species. Depending on the specific combination of thermal conductivity and wound diameter, use of the original calibration equation resulted in an 81% under- to 48% over-estimation of sap flux density at modest flux rates. Future studies should verify these simulations and assess their utility in estimating sap flux density for this widely used technique.« less

Broadcasting satellite service synthesis using gradient and cyclic coordinate search procedures

NASA Technical Reports Server (NTRS)

Reilly, C. H.; Mount-Campbell, C. A.; Gonsalvez, D. J.; Martin, C. H.; Levis, C. A.; Wang, C. W.

1986-01-01

Two search techniques are considered for solving satellite synthesis problems. Neither is likely to find a globally optimal solution. In order to determine which method performs better and what factors affect their performance, we design an experiment and solve the same problem under a variety of starting solution configuration-algorithm combinations. Since there is no randomization in the experiment, we present results of practical, rather than statistical, significance. Our implementation of a cyclic coordinate search procedure clearly finds better synthesis solutions than our implementation of a gradient search procedure does with our objective of maximizing the minimum C/I ratio computed at test points on the perimeters of the intended service areas. The length of the available orbital arc and the configuration of the starting solution are shown to affect the quality of the solutions found.

On the relation between phase-field crack approximation and gradient damage modelling

NASA Astrophysics Data System (ADS)

Steinke, Christian; Zreid, Imadeddin; Kaliske, Michael

2017-05-01

The finite element implementation of a gradient enhanced microplane damage model is compared to a phase-field model for brittle fracture. Phase-field models and implicit gradient damage models share many similarities despite being conceived from very different standpoints. In both approaches, an additional differential equation and a length scale are introduced. However, while the phase-field method is formulated starting from the description of a crack in fracture mechanics, the gradient method starts from a continuum mechanics point of view. At first, the scope of application for both models is discussed to point out intersections. Then, the analysis of the employed mathematical methods and their rigorous comparison are presented. Finally, numerical examples are introduced to illustrate the findings of the comparison which are summarized in a conclusion at the end of the paper.

Broadcasting satellite service synthesis using gradient and cyclic coordinate search procedures

NASA Technical Reports Server (NTRS)

Reilly, C. H.; Mount-Campbell, C. A.; Gonsalvez, D. J.; Martin, C. H.; Levis, C. A.

1986-01-01

Two search techniques are considered for solving satellite synthesis problems. Neither is likely to find a globally optimal solution. In order to determine which method performs better and what factors affect their performance, an experiment is designed and the same problem is solved under a variety of starting solution configuration-algorithm combinations. Since there is no randomization in the experiment, results of practical, rather than statistical, significance are presented. Implementation of a cyclic coordinate search procedure clearly finds better synthesis solutions than implementation of a gradient search procedure does with the objective of maximizing the minimum C/I ratio computed at test points on the perimeters of the intended service areas. The length of the available orbital arc and the configuration of the starting solution are shown to affect the quality of the solutions found.

An Inquiry into the Cost of Post Deployment Software Support (PDSS)

DTIC Science & Technology

1989-09-01

Equations .......... ii vi AFIT/GLM/LSY/835- I0 The increasing cost of software maintenance is taking a larger share of the military bidget each year... increments as needed (3:59). The second page of tne Form 75 starts with a section stating how the hours, and consequently the funds, will be allocated to...length of time required, the timeline can be in hourly, weekly, mnunthly, or quarterly increments . Some milestones included are formal approval, test

Installation Effects on Heat Transfer Measurements for a Turbine Vane

DTIC Science & Technology

2003-03-01

turbine vanes and blades in order to acquire high accuracy, high frequency response data. Typically the installation procedure has involved either mounting...length scale such as blade chord) again matches the engine value. Also before the start of the run a choke valve downstream of the turbine is set to...of Engineering for Gas Turbines and Power (January 1984), Volume 106. p 229 - 240. Gibbings, J.C. “On boundary Layer Transition Wires.” Aeronautical

NASA satellite to track North Pole expedition

NASA Technical Reports Server (NTRS)

1978-01-01

The proposed expedition of a lone explorer and the use of Nimbus 6 (NASA meteorological research satellite) to track his journey is reported. The journey is scheduled to start March 4, 1978, and will cover a distance of 6.000 Km (3,728 miles) from northern Canada to the North Pole and return, traveling the length of Greenland's isolated interior. The mode of transportation for the explorer will be by dog sled. Instrumentation and tracking techniques are discussed.

Telomere lengthening and other functions of telomerase.

PubMed

Rubtsova, M P; Vasilkova, D P; Malyavko, A N; Naraikina, Yu V; Zvereva, M I; Dontsova, O A

2012-04-01

Telomerase is an enzyme that maintains the length of the telomere. The telomere length specifies the number of divisions a cell can undergo before it finally dies (i.e. the proliferative potential of cells). For example, telomerase is activated in embryonic cell lines and the telomere length is maintained at a constant level; therefore, these cells have an unlimited fission potential. Stem cells are characterized by a lower telomerase activity, which enables only partial compensation for the shortening of telomeres. Somatic cells are usually characterized by the absence of telomerase activity. Telomere shortening leads to the attainment of the Hayflick limit, the transition of cells to a state of senescence. The cells subsequently enter a state of crisis, accompanied by massive cell death. The surviving cells become cancer cells, which are capable both of dividing indefinitely and maintaining telomere length (usually with the aid of telomerase). Telomerase is a reverse transcriptase. It consists of two major components: telomerase RNA (TER) and reverse transcriptase (TERT). TER is a non-coding RNA, and it contains the region which serves as a template for telomere synthesis. An increasing number of articles focussing on the alternative functions of telomerase components have recently started appearing. The present review summarizes data on the structure, biogenesis, and functions of telomerase.

To the theory of high-power gyrotrons with uptapered resonators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dumbrajs, O.; Nusinovich, G. S.

In high-power gyrotrons it is desirable to combine an optimal resonator length with the optimal value of the resonator quality factor. In resonators with the constant radius of the central part, the possibilities of this combination are limited because the quality factor of the resonator sharply increases with its length. Therefore the attempts to increase the length for maximizing the efficiency leads to such increase in the quality factor which makes the optimal current too small. Resonators with slightly uptapered profiles offer more flexibility in this regard. In such resonators, one can separate optimization of the interaction length from optimizationmore » of the quality factor because the quality factor determined by diffractive losses can be reduced by increasing the angle of uptapering. In the present paper, these issues are analyzed by studying as a typical high-power 17 GHz gyrotron which is currently under development in Europe for ITER (http://en.wikipedia.org/wiki/ITER). The effect of a slight uptapering of the resonator wall on the efficiency enhancement and the purity of the radiation spectrum in the process of the gyrotron start-up and power modulation are studied. Results show that optimal modification of the shape of a slightly uptapered resonator may result in increasing the gyrotron power from 1052 to 1360 kW.« less

Sequencing, Analysis, and Annotation of Expressed Sequence Tags for Camelus dromedarius

PubMed Central

Al-Swailem, Abdulaziz M.; Shehata, Maher M.; Abu-Duhier, Faisel M.; Al-Yamani, Essam J.; Al-Busadah, Khalid A.; Al-Arawi, Mohammed S.; Al-Khider, Ali Y.; Al-Muhaimeed, Abdullah N.; Al-Qahtani, Fahad H.; Manee, Manee M.; Al-Shomrani, Badr M.; Al-Qhtani, Saad M.; Al-Harthi, Amer S.; Akdemir, Kadir C.; Otu, Hasan H.

2010-01-01

Despite its economical, cultural, and biological importance, there has not been a large scale sequencing project to date for Camelus dromedarius. With the goal of sequencing complete DNA of the organism, we first established and sequenced camel EST libraries, generating 70,272 reads. Following trimming, chimera check, repeat masking, cluster and assembly, we obtained 23,602 putative gene sequences, out of which over 4,500 potentially novel or fast evolving gene sequences do not carry any homology to other available genomes. Functional annotation of sequences with similarities in nucleotide and protein databases has been obtained using Gene Ontology classification. Comparison to available full length cDNA sequences and Open Reading Frame (ORF) analysis of camel sequences that exhibit homology to known genes show more than 80% of the contigs with an ORF>300 bp and ∼40% hits extending to the start codons of full length cDNAs suggesting successful characterization of camel genes. Similarity analyses are done separately for different organisms including human, mouse, bovine, and rat. Accompanying web portal, CAGBASE (http://camel.kacst.edu.sa/), hosts a relational database containing annotated EST sequences and analysis tools with possibility to add sequences from public domain. We anticipate our results to provide a home base for genomic studies of camel and other comparative studies enabling a starting point for whole genome sequencing of the organism. PMID:20502665

The temporal evolution of pyroclast ejection velocity and exit trajectory, a laboratory case study.

NASA Astrophysics Data System (ADS)

Cigala, Valeria; Kueppers, Ulrich; José Peña Fernández, Juan; Sesterhenn, Jörn; Taddeucci, Jacopo; Dingwell, Donald Bruce

2017-04-01

Pyroclast ejection dynamics during explosive volcanic eruptions are highly variable. This variability is due to complex interaction among different parameters, which define the boundary conditions for a certain eruption. Scaled and controlled laboratory experiments come in hand to characterize the effect of specific physical parameters on the ejection dynamics. We focus, in particular, on the dynamics of pyroclasts ejection in the region just above the vent, also called gas-thrust region, for the case of impulsively released gas-pyroclast mixtures (i.e., unsteady eruptions). In this study, gas-particle mixtures were released in a series of shock-tube experiments with varying 1) tube length, 2) vent geometry, 3) gas-particle ratio, 4) initial temperature and 5) particle size distribution. The tube length was varied by changing the starting sample load, resulting in a gas-particle ratio of 1, 2.5 and 8, respectively. Thereby, the initial distance of the sample from the exit varied between 320, 230 and 140 mm, respectively, allowing for variable time for accelerating (and possibly decelerating) the particles prior to exit. Moreover, four vent geometries were employed, a nozzle with converging walls (5°), a cylinder and two funnels with walls diverging at 15° and 30° respectively. All of them are characterized by a value h/D=1.07, where h is the length between the throat and the lip of the vent and D is throat diameter. The experiments were performed at both 500°C and room temperature using particles from 2 to 0.125 mm in diameter. In all experiments, initial pressure was 15 MPa. High speed videos of the ejection behaviour were analyzed to obtain the temporal evolution of particle velocity and exit trajectory depending on boundary conditions. Max velocity of 300 m/s was observed together with a non-linear decay of exit velocity over time. The exit trajectories were found to deviate from the vertical by 5° to 45° and also display a non-linear evolution with time. Moreover, the velocity decay was used to investigate the accuracy of the empirical fragmentation depth model from Alatorre-Ibargüengoitia et al. (2011), when different gas-particle ratios are employed. This model is not reproducing all experimental constellations satisfactorily. Further experiments will help to develop this model further. Vent geometry, particle size and temperature show the largest effect on ejection velocity and trajectory. In particular, we observed a positive correlation of velocity with 1) diverging vent walls and 2) temperature and a negative correlation with 1) starting tube length and 2) particle size. On the other hand, exit trajectories show negative correlation with 1) diverging walls, 2) starting tube length, 3) temperature and 4) particle size. Moreover, we found that gas-particle ratio additionally strongly affects the temporal evolution of particle ejection velocity and trajectory. These results highlight the importance of scaled and repeatable laboratory experiments for an enhanced understanding of natural volcanic phenomena that bear direct observability. A closer link will enhance volcanic hazard assessment.

Cold-induced bradycardia in man during sleep in Arctic winter nights

NASA Astrophysics Data System (ADS)

Buguet, A. G. C.

1987-03-01

Two young male Caucasians volunteered for a study on the effects of cold exposure during night sleep in winter in the Arctic. The 14-day experiment was divided in three consecutive periods, baseline (2 nights), cold exposure (10 night) and recovery (2 nights). Both baseline and recovery data were obtained in neutral thermal conditions in a laboratory. The subjects slept in a sleeping bag under an unheated tent during the cold exposure. Apart from polysomnographic and body temperature recordings, electrocardiograms were taken through a telemetric system for safety purposes. Heart rates were noted at 5-min intervals and averaged hourly. In both environmental conditions, heart rate decreased within the first two hours of sleep. Comparison of the data obtained during cold exposure vs. thermal neutrality revealed lower values of heart rate in the cold, while body temperatures remained within normal range. This cold-induced bradycardia supervening during night sleep is discussed in terms of the occurrence of a vagal reflex preventing central blood pressure to rise.

Shear flow control of cold and heated rectangular jets by mechanical tabs. Volume 1: Results and discussion

NASA Technical Reports Server (NTRS)

Brown, W. H.; Ahuja, K. K.

1989-01-01

The effects of mechanical protrusions on the jet mixing characteristics of rectangular nozzles for heated and unheated subsonic and supersonic jet plumes were studied. The characteristics of a rectangular nozzle of aspect ratio 4 without the mechanical protrusions were first investigated. Intrusive probes were used to make the flow measurements. Possible errors introduced by intrusive probes in making shear flow measurements were also examined. Several scaled sizes of mechanical tabs were then tested, configured around the perimeter of the rectangular jet. Both the number and the location of the tabs were varied. From this, the best configuration was selected. The conclusions derived were: (1) intrusive probes can produce significant errors in the measurements of the velocity of jets if they are large in diameter and penetrate beyond the jet center; (2) rectangular jets without tabs, compared to circular jets of the same exit area, provide faster jet mixing; and (3) further mixing enhancement is possible by using mechanical tabs.

Evaluation of genetic polymorphism among Lactobacillus rhamnosus non-starter Parmigiano Reggiano cheese strains.

PubMed

Bove, Claudio Giorgio; De Dea Lindner, Juliano; Lazzi, Camilla; Gatti, Monica; Neviani, Erasmo

2011-01-05

Parmigiano Reggiano (PR) is an Italian cooked, long-ripened cheese made with unheated cow's milk and natural whey starter. The microflora is involved in the manufacturing of this cheese, arising from the natural whey starter, the raw milk and the environment. Molecular studies have shown that mesophilic non-starter lactic acid bacteria (NSLAB) are the dominant microflora present during the ripening of PR. In this study, a characterisation of Lactobacillus rhamnosus isolated from a single PR manufacturing and ripening process is reported, using a combination of genotypic fingerprinting techniques (RAPD-PCR and REP-PCR). The intraspecies heterogeneity evidenced for 66 strains is correlated to their abilities to adapt to specific environmental and technological conditions. The detection of biotypes that correlate with specific moments in cheese ripening or differential development throughout this process suggests that these strains may have specific roles closely linked to their peculiar technological properties. Copyright © 2010 Elsevier B.V. All rights reserved.

Product selectivity in plasmonic photocatalysis for carbon dioxide hydrogenation

DOE PAGES

Zhang, Xiao; Li, Xueqian; Zhang, Du; ...

2017-02-23

Photocatalysis has not found widespread industrial adoption, in spite of decades of active research, because the challenges associated with catalyst illumination and turnover outweigh the touted advantages of replacing heat with light. A demonstration that light can control product selectivity in complex chemical reactions could prove to be transformative. Here, we show how the recently demonstrated plasmonic behaviour of rhodium nanoparticles profoundly improves their already excellent catalytic properties by simultaneously reducing the activation energy and selectively producing a desired but kinetically unfavourable product for the important carbon dioxide hydrogenation reaction. Methane is almost exclusively produced when rhodium nanoparticles are mildlymore » illuminated as hot electrons are injected into the anti-bonding orbital of a critical intermediate, while carbon monoxide and methane are equally produced without illumination. As a result, the reduced activation energy and super-linear dependence on light intensity cause the unheated photocatalytic methane production rate to exceed the thermocatalytic rate at 350°C.« less

The free jet as a simulator of forward velocity effects on jet noise

NASA Technical Reports Server (NTRS)

Ahuja, K. K.; Tester, B. J.; Tanna, H. K.

1978-01-01

A thorough theoretical and experimental study of the effects of the free-jet shear layer on the transmission of sound from a model jet placed within the free jet to the far-field receiver located outside the free-jet flow was conducted. The validity and accuracy of the free-jet flight simulation technique for forward velocity effects on jet noise was evaluated. Transformation charts and a systematic computational procedure for converting measurements from a free-jet simulation to the corresponding results from a wind-tunnel simulation, and, finally, to the flight case were provided. The effects of simulated forward flight on jet mixing noise, internal noise and shock-associated noise from model-scale unheated and heated jets were established experimentally in a free-jet facility. It was illustrated that the existing anomalies between full-scale flight data and model-scale flight simulation data projected to the flight case, could well be due to the contamination of flight data by engine internal noise.

Sport fishing at a thermal discharge into Lake Michigan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spigarelli, S.A.; Thommes, M.M.

1976-07-01

Sport fishing censuses were conducted during 1972 and 1973 at the Point Beach Nuclear Plant on Lake Michigan (Two Rivers, Wisconsin). The objectives of this study were to describe the fishery at a typical shoreline thermal discharge into the upper Great Lakes and to make comparisons with reference fisheries in unheated areas. Extensive sport fishing at this power plant resulted in a relatively large catch of trout (4 species) and sporadic catches of salmon and non-salmonid species. Species composition of the catch and catch-per-unit-effort varied daily and seasonally and generally reflected trends in reference fisheries. A comparison between years showedmore » increased fishing effort, total catch, and proportion of trout in 1973, while success (catch-per-unit-effort) decreased. Despite this heavy fishing pressure, catch-per-unit-effort was generally higher at Point Beach than in reference shoreline fisheries. The economic value of thermal discharge fisheries on Lake Michigan is estimated using available value and expenditure data.« less

Role of Curing Agents in the Preservation of Shelf-stable Canned Meat Products1

PubMed Central

Duncan, Charles L.; Foster, E. M.

1968-01-01

Experiments were conducted to gain a better understanding of the mechanism by which sodium chloride, sodium nitrate, and sodium nitrite supplement the action of heat in preserving canned cured meat products. Heated spores of putrefactive anaerobe 3679h were less tolerant of all three curing agents in the outgrowth medium than were unheated spores. When the curing agents were added to the heating menstruum, but not to the outgrowth medium, sodium chloride and sodium nitrate tended to protect the spores against heat injury, but sodium nitrite did not. When the spores were both heated and cultured in the presence of the curing agents: (i) nitrate and salt increased the apparent heat resistance at low concentrations (0.5 to 1%) but decreased it at concentrations of 2 to 4%; (ii) nitrite was markedly inhibitory, especially at pH 6.0. At the normal pH of canned luncheon meats (approximately 6.0), nitrite appears to be the chief preservative agent against spoilage by putrefactive anaerobes. PMID:5645422

Growth from Spores of Nonproteolytic Clostridium botulinum in Heat-Treated Vegetable Juice

PubMed Central

Stringer, Sandra C.; Haque, Nuzrul; Peck, Michael W.

1999-01-01

Unheated spores of nonproteolytic Clostridium botulinum were able to lead to growth in sterile deoxygenated turnip, spring green, helda bean, broccoli, or potato juice, although the probability of growth was low and the time to growth was longer than the time to growth in culture media. With all five vegetable juices tested, the probability of growth increased when spores were inoculated into the juice and then heated for 2 min in a water bath at 80°C. The probability of growth was greater in bean or broccoli juice than in culture media following 10 min of heat treatment in these media. Growth was prevented by heat treatment of spores in vegetable juices or culture media at 80°C for 100 min. We show for the first time that adding heat-treated vegetable juice to culture media can increase the number of heat-damaged spores of C. botulinum that can lead to colony formation. PMID:10224012

Three-year comparative study of polyphenol contents and antioxidant capacities in fruits of tomato (Lycopersicon esculentum Mill.) cultivars grown under organic and conventional conditions.

PubMed

Anton, Dea; Matt, Darja; Pedastsaar, Priit; Bender, Ingrid; Kazimierczak, Renata; Roasto, Mati; Kaart, Tanel; Luik, Anne; Püssa, Tõnu

2014-06-04

In the present study, four tomato cultivars were grown under organic and conventional conditions in separate unheated greenhouses in three consecutive years. The objective was to assess the influence of the cultivation system on the content of individual polyphenols, total phenolics, and antioxidant capacity of tomatoes. The fruits were analyzed for total phenolic content by the Folin-Ciocalteau method and antioxidant capacity by the DPPH free radical scavenging assay. Individual phenolic compounds were analyzed using HPLC-DAD-MS/MS. Among 30 identified and quantified polyphenols, significantly higher contents of apigenin acetylhexoside, caffeic acid hexoside I, and phloretin dihexoside were found in all organic samples. The content of polyphenols was more dependent on year and cultivar than on cultivation conditions. Generally, the cultivation system had minor impact on polyphenols content, and only a few compounds were influenced by the mode of cultivation in all tested cultivars during all three years.

Density Fluctuation in Asymmetric Nozzle Plumes and Correlation with Far Field Noise

NASA Technical Reports Server (NTRS)

Panda, J.; Zaman, K. B. M. Q.

2001-01-01

A comparative experimental study of air density fluctuations in the unheated plumes of a circular, 4-tabbed-circular, chevron-circular and 10-lobed rectangular nozzles was performed at a fixed Mach number of 0.95 using a recently developed Rayleigh scattering based technique. Subsequently, the flow density fluctuations are cross-correlated with the far field sound pressure fluctuations to determine sources for acoustics emission. The nearly identical noise spectra from the baseline circular and the chevron nozzles are found to be in agreement with the similarity in spreading, turbulence fluctuations, and flow-sound correlations measured in the plumes. The lobed nozzle produced the least low frequency noise, in agreement with the weakest overall density fluctuations and flow-sound correlation. The tabbed nozzle took an intermediate position in the hierarchy of noise generation, intensity of turbulent fluctuation and flow-sound correlation. Some of the features in the 4-tabbed nozzle are found to be explainable in terms of splitting of the jet in a central large core and 4 side jetlets.

Flight effects on the aerodynamic and acoustic characteristics of inverted profile coannular nozzles

NASA Technical Reports Server (NTRS)

Kozlowski, H.; Packman, A. B.

1978-01-01

The effect of forward flight on the jet noise of coannular exhaust nozzles, suitable for Variable Stream Control Engines (VSCE), was investigated in a series of wind tunnel tests. The primary stream properties were maintained constant at 300 mps and 394 K. A total of 230 acoustic data points was obtained. Force measurement tests using an unheated air supply covered the same range of tunnel speeds and nozzle pressure ratios on each of the nozzle configurations. A total of 80 points was taken. The coannular nozzle OASPL and PNL noise reductions observed statically relative to synthesized values were basically retained under simulated flight conditions. The effect of fan to primary stream area ratio on flight effects was minor. At take-off speed, the peak jet noise for a VSCE was estimated to be over 6 PNdB lower than the static noise level. High static thrust coefficients were obtained for the basic coannular nozzles, with a decay of 0.75 percent at take-off speeds.

Indium oxide-based transparent conductive films deposited by reactive sputtering using alloy targets

NASA Astrophysics Data System (ADS)

Miyazaki, Yusuke; Maruyama, Eri; Jia, Junjun; Machinaga, Hironobu; Shigesato, Yuzo

2017-04-01

High-quality transparent conductive oxide (TCO) films, Sn-doped In2O3 (ITO) and In2O3-ZnO (IZO), were successfully deposited on either synthetic silica or polyethylene terephthalate (PET) substrates in the “transition region” by reactive dc magnetron sputtering using In-Zn and In-Sn alloy targets, respectively, with a specially designed plasma emission feedback system. The composition, crystallinity, surface morphology, and electrical and optical properties of the films were analyzed. All of the IZO films were amorphous, whereas the ITO films were polycrystalline over a wide range of deposition conditions. The minimum resistivities of the IZO and ITO films deposited on the heated PET substrates at 150 °C were 3.3 × 10-4 and 5.4 × 10-4 Ω·cm, respectively. By applying rf bias to unheated PET substrates, ITO films with a resistivity of 4.4 × 10-4 Ω·cm were deposited at a dc self-bias voltage of -60 V.

Use of intumescent compounds in fire curtains

NASA Astrophysics Data System (ADS)

Nedryshkin, Oleg; Gravit, Marina; Mukhamedzhanova, Olga

2017-10-01

Automatic fire curtains are designed to divide sections of premises and structures into fire compartments for the purpose of localizing a fire, as well as filling openings in fire barriers. If a fire occurs due to a signal from a fire alarm sensor or a signal from a fire station, the blind automatically falls and locates the source of ignition. The paper presents the results of testing nine samples of fire curtains with an applied intumescent composition. Tests were conducted for 60 minutes before loss of sample integrity. The average temperature from the heated side of the sample reached 800 ∼ 1000 ° C. Depending on the sample, the temperature from the unheated side ranged from 70 ° C to 294 ° C. The best result was shown by a sample from a layer of needle-punched heat-insulating material with a thermal conductivity of 0.036 W/(m×K) placed between layers of foil and treated with water-based intumescent composition of silica material.

Effect of divalent ions on the optical emission behavior of protein thin films

NASA Astrophysics Data System (ADS)

Bhowal, Ashim Chandra; Kundu, Sarathi

2016-05-01

Photoluminescence behaviors of proteinthin film, bovine serum albumin (BSA) have been studied in the presence of three divalent ions (Mg2+, Ca2+ and Ba2+) at different temperatures using fluorescence spectroscopy. Film thickness and morphology have been studied using atomic force microscopy. Variation of different physicochemical parameters like temperature, solvent polarity, pH, ionic strength, substrate binding etc. can make conformational changes in the protein structure and hence influences the emission behavior.In thin film conformation of BSA, dynamic quenching behavior has beenidentified in the presence of all the three divalent ions at pH≈ 5.5. Depending upon the charge density of the divalent ions interaction with protein molecules modifies and as a result quenching efficiency varies. Also after heat treatment, conformation of the protein molecules changes and as a result the quenching efficiency enhances than that of the unheated films. Studies on such protein-ion interactions and conformational variation may explore various functions of protein when it will adsorb on soft surfaces like membranes, vesicles, etc.

Processing approach towards the formation of thin-film Cu(In,Ga)Se2

DOEpatents

Beck, Markus E.; Noufi, Rommel

2003-01-01

A two-stage method of producing thin-films of group IB-IIIA-VIA on a substrate for semiconductor device applications includes a first stage of depositing an amorphous group IB-IIIA-VIA precursor onto an unheated substrate, wherein the precursor contains all of the group IB and group IIIA constituents of the semiconductor thin-film to be produced in the stoichiometric amounts desired for the final product, and a second stage which involves subjecting the precursor to a short thermal treatment at 420.degree. C.-550.degree. C. in a vacuum or under an inert atmosphere to produce a single-phase, group IB-III-VIA film. Preferably the precursor also comprises the group VIA element in the stoichiometric amount desired for the final semiconductor thin-film. The group IB-IIIA-VIA semiconductor films may be, for example, Cu(In,Ga)(Se,S).sub.2 mixed-metal chalcogenides. The resultant supported group IB-IIIA-VIA semiconductor film is suitable for use in photovoltaic applications.

Re-examination of the Neisser—Wechsberg (antibody prozone) phenomenon

PubMed Central

Muschel, L. H.; Gustafson, Linda; Larsen, Linda J.

1969-01-01

Although the Neisser—Wechsberg phenomenon resembles the inhibition of agglutination systems by excess antibody, the experimental results have indicated that with heat-inactivated antiserum the phenomenon results both from an excess of specific antibody and of non-specific anti-complementary activity. Complement (C) has been shown to be fixed in the presence of the excess antiserum which inhibits the bactericidal reaction. The inhibition was overcome by an excess of the third complement component factors indicating that the excess of antiserum interfered with the activation or function of the components acting at one of the late steps in the reaction sequence. The prozone phenomenon was relatively slight when unheated antiserum was used or when sensitized organisms were washed to remove serum substances unrelated to antibody. Non-specific anti-complementary activity, therefore, is a major contributor to the prozone phenomenon. Both IgM and IgG fractions of rabbit antisera elicited a prozone although the former had relatively greater bactericidal than inhibitory activity. PMID:5352361

Testing experience with unheated stain-gage balances in the NTF. [National Transonic Facility

NASA Technical Reports Server (NTRS)

Jacobs, Peter F.; Ferris, Alice T.

1986-01-01

A series of cryogenic (cryo) cycles was conducted in the cryo chamber at the National Transonic Facility (NTF) in order to identify the cause of apparent strain shifts in axial force with temperature for the Pathfinder I model and to minimize their effects. The results of the investigation indicated that the major cause of axial force end point shifts and thermal hysteresis loops was the thickness of the Teflon insulation on the instrumentation wires crossing the balance. By reducing the thickness of the insulation and the total number and size of the wires, apparent strain values were achieved for the model with instrumentation wires which were nearly identical to those for the model without wires. Because of the special design features used, the balance output was very accurate and repeatable over the entire NTF temperature range, even with balance thermal gradients as large as 64 F and transient conditions as large as 3 F/minute.

Heat Transfer Measurements with Surface Mounted Foil-Sensors in an Active Mode: A Comprehensive Review and a New Design

PubMed Central

Mocikat, Horst; Herwig, Heinz

2009-01-01

A comprehensive review of film-sensors shows that they are primarily operated in a passive mode, i.e. without being actively heated to an extent, whereby they create a heat transfer situation on their own. Only when these sensors are used for wall shear stress measurements, the detection of laminar/turbulent transition, or the measurement of certain flow velocities, they are operated in an active mode, i.e. heated by an electrical current (after an appropriate calibration). In our study we demonstrate how these R(T)-based sensors (temperature dependence of the electrical resistance R) can also be applied in an active mode for heat transfer measurements. These measurements can be made on cold, unheated bodies, provided certain requirements with respect to the flow field are fulfilled. Our new sensors are laminated nickel- and polyimide-foils manufactured with a special technology, which is also described in detail. PMID:22574060

Mechanical properties and solubility in water of corn starch-collagen composite films: Effect of starch type and concentrations.

PubMed

Wang, Kun; Wang, Wenhang; Ye, Ran; Liu, Anjun; Xiao, Jingdong; Liu, Yaowei; Zhao, Yana

2017-02-01

This study investigated the possibility of enhancing the properties of collagen with three different maize starches: waxy maize starch, normal starch, and high amylose starch. Scanning electron microscopy images revealed that starch-collagen films had a rougher surface compared to pure collagen films which became smoother upon heating. Amylose starch and normal starch increased the tensile strength of unheated collagen films in both dry and wet states, while all starches increased tensile strength of collagen film by heating. Depending upon the amylose content and starch concentrations, film solubility in water decreased with the addition of starch. DSC thermograms demonstrated that addition of all starches improved the thermal stability of the collagen film. Moreover, X-ray diffraction results indicated that except for high amylose starch, the crystallinity of both starch and collagen was significantly decreased when subject to heating. FTIR spectra indicated that intermolecular interactions between starch and collagen were enhanced upon heating. Copyright © 2016 Elsevier Ltd. All rights reserved.

Rewetting of monogroove heat pipe in Space Station radiators

NASA Technical Reports Server (NTRS)

Chan, S. H.

1994-01-01

This annual report summarizes the work accomplished on rewetting of monogroove heat pipe in space station. Specifically, theoretical and experimental investigations of the rewetting characteristics of thin liquid films over unheated and heated capillary grooved plates were performed. To investigate the effect of gravity on rewetting, the grooved surface was placed in upward and downward facing positions. Profound gravitational effects were observed as the rewetting velocity was found to be higher in the upward than in the downward facing orientation. The difference was even greater with higher initial plate temperatures. With either orientation, it was found that the rewetting velocity increased with the initial plate temperature. But when the temperature was raised above a rewetting temperature, the rewetting velocity decreased with the initial plate temperature. Hydrodynamically controlled and heat conduction controlled rewetting models were then presented to explain and to predict the rewetting characteristics in these two distinct regions. The predicted rewetting velocities were found to be in good agreement with experimental data with elevated plate temperatures.

Emulsifying properties and oil/water (O/W) interface adsorption behavior of heated soy proteins: effects of heating concentration, homogenizer rotating speed, and salt addition level.

PubMed

Cui, Zhumei; Chen, Yeming; Kong, Xiangzhen; Zhang, Caimeng; Hua, Yufei

2014-02-19

The adsorption of heat-denatured soy proteins at the oil/water (O/W) interface during emulsification was studied. Protein samples were prepared by heating protein solutions at concentrations of 1-5% (w/v) and were then diluted to 0.3% (w/v). The results showed that soy proteins that had been heated at higher concentrations generated smaller droplet size of emulsion. Increase in homogenizer rotating speed resulted in higher protein adsorption percentages and lower surface loads at the O/W interface. Surface loads for both unheated and heated soy proteins were linearly correlated with the unadsorbed proteins' equilibrium concentration at various rotating speeds. With the rise in NaCl addition level, protein adsorption percentage and surface loads of emulsions increased, whereas lower droplet sizes were obtained at the ionic strength of 0.1 M. The aggregates and non-aggregates displayed different adsorption behaviors when rotating speed or NaCl concentration was varied.

Product selectivity in plasmonic photocatalysis for carbon dioxide hydrogenation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Xiao; Li, Xueqian; Zhang, Du

Photocatalysis has not found widespread industrial adoption, in spite of decades of active research, because the challenges associated with catalyst illumination and turnover outweigh the touted advantages of replacing heat with light. A demonstration that light can control product selectivity in complex chemical reactions could prove to be transformative. Here, we show how the recently demonstrated plasmonic behaviour of rhodium nanoparticles profoundly improves their already excellent catalytic properties by simultaneously reducing the activation energy and selectively producing a desired but kinetically unfavourable product for the important carbon dioxide hydrogenation reaction. Methane is almost exclusively produced when rhodium nanoparticles are mildlymore » illuminated as hot electrons are injected into the anti-bonding orbital of a critical intermediate, while carbon monoxide and methane are equally produced without illumination. As a result, the reduced activation energy and super-linear dependence on light intensity cause the unheated photocatalytic methane production rate to exceed the thermocatalytic rate at 350°C.« less

The NASA Langley Isolator Dynamics Research Lab

NASA Technical Reports Server (NTRS)

Middleton, Troy F.; Balla, Robert J.; Baurle, Robert A.; Humphreys, William M.; Wilson, Lloyd G.

2010-01-01

The Isolator Dynamics Research Lab (IDRL) is under construction at the NASA Langley Research Center in Hampton, Virginia. A unique test apparatus is being fabricated to support both wall and in-stream measurements for investigating the internal flow of a dual-mode scramjet isolator model. The test section is 24 inches long with a 1-inch by 2-inch cross sectional area and is supplied with unheated, dry air through a Mach 2.5 converging-diverging nozzle. The test section is being fabricated with two sets (glass and metallic) of interchangeable sidewalls to support flow visualization and laser-based measurement techniques as well as static pressure, wall temperature, and high frequency pressure measurements. During 2010, a CFD code validation experiment will be conducted in the lab in support of NASA s Fundamental Aerodynamics Program. This paper describes the mechanical design of the Isolator Dynamics Research Lab test apparatus and presents a summary of the measurement techniques planned for investigating the internal flow field of a scramjet isolator model.

Highly oriented Bi-based thin films with zero resistance at 106 K

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kula, W.; Sobolewski, R.; Gorecka, J.

1991-03-01

This paper reports on fabrication and characterization of nearly single-phase superconducting Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} thin films. The films were dc magnetron sputtered from heavily Pb-doped (Pb/Bi molar ratios up to 1.25), sintered targets on unheated MgO, SrTiO{sub 3}, CaNdAlO{sub 4}, and SrLaAlO{sub 4} single crystals. For the films grown on the (100) oriented MgO substrate, less than 1 hour of annealing in air at 870{degrees} C was sufficient to obtain more than 90% of the 110-K-phase material, with highly c-axis oriented crystalline structure and zero resistivity at 106 K. The films fabricated on the other substrates alsomore » exhibited a narrow superconducting transition and were fully superconducting above 100 K, but they consisted of a mixed-phase material with a large percentage of the 80 K phase.« less

Thermal conditions in selected urban and semi-natural habitats, important for the forensic entomology.

PubMed

Michalski, Marek; Nadolski, Jerzy

2018-06-01

A long-term study on thermal conditions in selected urban and semi-natural habitats, where human corpses are likely to be found, was conducted in the city of Lodz (Central Poland). Thermal data were collected during two years at nine sites and compared with corresponding data from the nearest permanent meteorological station at Lodz Airport (ICAO code: EPLL). The conditions closest to those at the meteorological station prevailed in the deciduous forest, coefficient of determination R 2 for those sets of data was above 0.96. The open field was characterized by high daily amplitudes, especially during spring, while the site in the allotment gardens was characterized by relatively high winter temperatures. The conditions prevailing in all closed space sites were very diverse and only slightly similar to the external ones. The most distinct site was an unheated basement in a tenement house, where temperature was almost always above 0°C and daily amplitudes were negligible. Copyright © 2018 Elsevier B.V. All rights reserved.

On Theoretical Broadband Shock-Associated Noise Near-Field Cross-Spectra

NASA Technical Reports Server (NTRS)

Miller, Steven A. E.

2015-01-01

The cross-spectral acoustic analogy is used to predict auto-spectra and cross-spectra of broadband shock-associated noise in the near-field and far-field from a range of heated and unheated supersonic off-design jets. A single equivalent source model is proposed for the near-field, mid-field, and far-field terms, that contains flow-field statistics of the shock wave shear layer interactions. Flow-field statistics are modeled based upon experimental observation and computational fluid dynamics solutions. An axisymmetric assumption is used to reduce the model to a closed-form equation involving a double summation over the equivalent source at each shock wave shear layer interaction. Predictions are compared with a wide variety of measurements at numerous jet Mach numbers and temperature ratios from multiple facilities. Auto-spectral predictions of broadband shock-associated noise in the near-field and far-field capture trends observed in measurement and other prediction theories. Predictions of spatial coherence of broadband shock-associated noise accurately capture the peak coherent intensity, frequency, and spectral width.

Quantum gravity in three dimensions, Witten spinors and the quantisation of length

NASA Astrophysics Data System (ADS)

Wieland, Wolfgang

2018-05-01

In this paper, I investigate the quantisation of length in euclidean quantum gravity in three dimensions. The starting point is the classical hamiltonian formalism in a cylinder of finite radius. At this finite boundary, a counter term is introduced that couples the gravitational field in the interior to a two-dimensional conformal field theory for an SU (2) boundary spinor, whose norm determines the conformal factor between the fiducial boundary metric and the physical metric in the bulk. The equations of motion for this boundary spinor are derived from the boundary action and turn out to be the two-dimensional analogue of the Witten equations appearing in Witten's proof of the positive mass theorem. The paper concludes with some comments on the resulting quantum theory. It is shown, in particular, that the length of a one-dimensional cross section of the boundary turns into a number operator on the Fock space of the theory. The spectrum of this operator is discrete and matches the results from loop quantum gravity in the spin network representation.

Saddlepoint approximation to the distribution of the total distance of the continuous time random walk

NASA Astrophysics Data System (ADS)

Gatto, Riccardo

2017-12-01

This article considers the random walk over Rp, with p ≥ 2, where a given particle starts at the origin and moves stepwise with uniformly distributed step directions and step lengths following a common distribution. Step directions and step lengths are independent. The case where the number of steps of the particle is fixed and the more general case where it follows an independent continuous time inhomogeneous counting process are considered. Saddlepoint approximations to the distribution of the distance from the position of the particle to the origin are provided. Despite the p-dimensional nature of the random walk, the computations of the saddlepoint approximations are one-dimensional and thus simple. Explicit formulae are derived with dimension p = 3: for uniformly and exponentially distributed step lengths, for fixed and for Poisson distributed number of steps. In these situations, the high accuracy of the saddlepoint approximations is illustrated by numerical comparisons with Monte Carlo simulation. Contribution to the "Topical Issue: Continuous Time Random Walk Still Trendy: Fifty-year History, Current State and Outlook", edited by Ryszard Kutner and Jaume Masoliver.

SON and its alternatively spliced isoforms control MLL complex-mediated H3K4me3 and transcription of leukemia-associated genes

PubMed Central

Kim, Jung-Hyun; Baddoo, Melody C.; Park, Eun Young; Stone, Joshua K.; Park, Hyeonsoo; Butler, Thomas W.; Huang, Gang; Yan, Xiaomei; Pauli-Behn, Florencia; Myers, Richard M.; Tan, Ming; Flemington, Erik K.; Lim, Ssang-Taek; Erin Ahn, Eun-Young

2016-01-01

SUMMARY Dysregulation of MLL complex-mediated histone methylation plays a pivotal role in gene expression associated with diseases, but little is known about cellular factors modulating MLL complex activity. Here, we report that SON, previously known as an RNA splicing factor, controls MLL complex-mediated transcriptional initiation. SON binds to DNA near transcription start sites, interacts with menin, and inhibits MLL complex assembly, resulting in decreased H3K4me3 and transcriptional repression. Importantly, alternatively spliced short isoforms of SON are markedly upregulated in acute myeloid leukemia. The short isoforms compete with full-length SON for chromatin occupancy, but lack the menin-binding ability, thereby antagonizing full-length SON function in transcriptional repression while not impairing full-length SON-mediated RNA splicing. Furthermore, overexpression of a short isoform of SON enhances replating potential of hematopoietic progenitors. Our findings define SON as a fine-tuner of the MLL-menin interaction and reveal short SON overexpression as a marker indicating aberrant transcriptional initiation in leukemia. PMID:26990989

Dynamic photoinduced realignment processes in photoresponsive block copolymer films: effects of the chain length and block copolymer architecture.

PubMed

Sano, Masami; Shan, Feng; Hara, Mitsuo; Nagano, Shusaku; Shinohara, Yuya; Amemiya, Yoshiyuki; Seki, Takahiro

2015-08-07

A series of block copolymers composed of an amorphous poly(butyl methacrylate) (PBMA) block connected with an azobenzene (Az)-containing liquid crystalline (PAz) block were synthesized by changing the chain length and polymer architecture. With these block copolymer films, the dynamic realignment process of microphase separated (MPS) cylinder arrays of PBMA in the PAz matrix induced by irradiation with linearly polarized light was studied by UV-visible absorption spectroscopy, and time-resolved grazing incidence small angle X-ray scattering (GI-SAXS) measurements using a synchrotron beam. Unexpectedly, the change in the chain length hardly affected the realignment rate. In contrast, the architecture of the AB-type diblock or the ABA-type triblock essentially altered the realignment feature. The strongly cooperative motion with an induction period before realignment was characteristic only for the diblock copolymer series, and the LPL-induced alignment change immediately started for triblock copolymers and the PAz homopolymer. Additionally, a marked acceleration in the photoinduced dynamic motions was unveiled in comparison with a thermal randomization process.

Controlled Living Nanowire Growth: Precise Control over the Morphology and Optical Properties of AgAuAg Bimetallic Nanowires

PubMed Central

2015-01-01

Inspired by the concept of living polymerization reaction, we are able to produce silver–gold–silver nanowires with a precise control over their total length and plasmonic properties by establishing a constant silver deposition rate on the tips of penta-twinned gold nanorods used as seed cores. Consequently, the length of the wires increases linearly in time. Starting with ∼210 nm × 32 nm gold cores, we produce nanowire lengths up to several microns in a highly controlled manner, with a small self-limited increase in thickness of ∼4 nm, corresponding to aspect ratios above 100, whereas the low polydispersity of the product allows us to detect up to nine distinguishable plasmonic resonances in a single colloidal solution. We analyze the spatial distribution and the nature of the plasmons by electron energy loss spectroscopy and obtain excellent agreement between measurements and electromagnetic simulations, clearly demonstrating that the presence of the gold core plays a marginal role, except for relatively short wires or high-energy modes. PMID:26134470

Lower Length Scale Model Development for Embrittlement of Reactor Presure Vessel Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yongfeng; Schwen, Daniel; Chakraborty, Pritam

2016-09-01

This report summarizes the lower-length-scale effort during FY 2016 in developing mesoscale capabilities for microstructure evolution, plasticity and fracture in reactor pressure vessel steels. During operation, reactor pressure vessels are subject to hardening and embrittlement caused by irradiation induced defect accumulation and irradiation enhanced solute precipitation. Both defect production and solute precipitation start from the atomic scale, and manifest their eventual effects as degradation in engineering scale properties. To predict the property degradation, multiscale modeling and simulation are needed to deal with the microstructure evolution, and to link the microstructure feature to material properties. In this report, the development ofmore » mesoscale capabilities for defect accumulation and solute precipitation are summarized. A crystal plasticity model to capture defect-dislocation interaction and a damage model for cleavage micro-crack propagation is also provided.« less

Design of air-gapped magnetic-core inductors for superimposed direct and alternating currents

NASA Technical Reports Server (NTRS)

Ohri, A. K.; Wilson, T. G.; Owen, H. A., Jr.

1976-01-01

Using data on standard magnetic-material properties and standard core sizes for air-gap-type cores, an algorithm designed for a computer solution is developed which optimally determines the air-gap length and locates the quiescent point on the normal magnetization curve so as to yield an inductor design with the minimum number of turns for a given ac voltage and frequency and with a given dc bias current superimposed in the same winding. Magnetic-material data used in the design are the normal magnetization curve and a family of incremental permeability curves. A second procedure, which requires a simpler set of calculations, starts from an assigned quiescent point on the normal magnetization curve and first screens candidate core sizes for suitability, then determines the required turns and air-gap length.

The complete mitochondrial genome of Gryllotalpa unispina Saussure, 1874 (Orthoptera: Gryllotalpoidea: Gryllotalpidae).

PubMed

Zhang, Yulong; Shao, Dandan; Cai, Miao; Yin, Hong; Zhang, Daochuan

2016-01-01

The complete mitochondrial genome of Gryllotalpa unispina was 15,513 bp in length and contained 70.9% AT. All G. unispina protein-coding sequences except for the nad2 started with a typical ATN codon. The usual termination codons (TAA) and incomplete stop codons (T) were found from 13 protein-coding genes. All tRNA genes were folded into the typical cloverleaf secondary structure, except trnS(AGN) lacking the dihydrouridine arm. The sizes of the large and small ribosomal RNA genes were 1245 and 725 bp, respectively. The A + T-rich region was 917 bp in length with 76.8%. The orientation and gene order of the G. unispina mitogenome were identical to the G. orientalis and G. pluvialis, there was no phenomenon of "DK rearrangement" which has been widely reported in Caelifera.

Mapping Subsurface Structure at Guar Kepah by using Ground Penetrating Radar

NASA Astrophysics Data System (ADS)

Mansor, Hafizuddin; Rosli, Najmiah; Ismail, N. A.; Saidin, M.; Masnan, S. S. K.

2018-04-01

A Ground Penetrating Radar (GPR) survey was conducted at Guar Kepah to detect buried object before commencement of archaeological gallery construction. The study area covered around 20 m length and 14 m width. 15 GPR lines were constructed from north to south with 20 m length, 1 m spacing and parallel to each other. The 500 MHz closed antenna had been used in this study. The surface findings were noticed before started GPR survey. The data was analysed and interpreted by using Groundvision software and several filters were applied to radargrams to enhance the data. Based on the result, several anomalies were detected. The surface findings also detected by GPR which cause hyperbolic curve in radargrams. The subsurface layer was detected by GPR survey. The anomalies are assigned to several classes based on the pattern of signals obtained in radargrams.

Development of high-efficiency solar cells on silicon web

NASA Technical Reports Server (NTRS)

Meier, D. L.; Greggi, J.; Rai-Choudhury, P.

1986-01-01

Work is reported aimed at identifying and reducing sources of carrier recombination both in the starting web silicon material and in the processed cells. Cross-sectional transmission electron microscopy measurements of several web cells were made and analyzed. The effect of the heavily twinned region on cell efficiency was modeled, and the modeling results compared to measured values for processed cells. The effects of low energy, high dose hydrogen ion implantation on cell efficiency and diffusion length were examined. Cells were fabricated from web silicon known to have a high diffusion length, with a new double layer antireflection coating being applied to these cells. A new contact system, to be used with oxide passivated cells and which greatly reduces the area of contact between metal and silicon, was designed. The application of DLTS measurements to beveled samples was further investigated.

Evaluation of predicted Medfly ( Ceratitis capitata) quarantine length in the United States utilizing degree-day and agent-based models.

PubMed

Collier, Travis; Manoukis, Nicholas

2017-01-01

Invasions by pest insects pose a significant threat to agriculture worldwide. In the case of Ceratitis capitata incursions on the US mainland, where it is not officially established, repeated detections are followed by quarantines and treatments to eliminate the invading population. However, it is difficult to accurately set quarantine duration because non-detection may not mean the pest is eliminated. Most programs extend quarantine lengths past the last fly detection by calculating the amount of time required for 3 generations to elapse under a thermal unit accumulation development model ("degree day"). A newer approach is to use an Agent-Based Simulation (ABS) to explicitly simulate population demographics and elimination. Here, predicted quarantine lengths for 11 sites in the continental United States are evaluated using both approaches. Results indicate a strong seasonality in quarantine length, with longer predictions in the second half of the year compared with the first; this pattern is more extreme in degree day predictions compared with ABS. Geographically, quarantine lengths increased with latitude, though this was less pronounced under the ABS. Variation in quarantine lengths for particular times and places was dramatically larger for degree day than ABS, generally spiking in the middle of the year for degree day and peaking in second half of the year for ABS. Analysis of 34 C. capitata quarantines from 1975 to 2017 in California shows that, for all but two, quarantines were started in the second half of the year, when degree day quarantine lengths are longest and have the highest uncertainty. For a set of hypothetical outbreaks based on these historical quarantines, the ABS produced significantly shorter quarantines than degree day calculations. Overall, ABS quarantine lengths were more consistent than degree day predictions, avoided unrealistically long values, and captured effects of rare events such as cold snaps.

Preventing Delays in First-Case Starts on the Neurosurgery Service: A Resident-Led Initiative at an Academic Institution.

PubMed

Han, Seunggu J; Rolston, John D; Zygourakis, Corinna C; Sun, Matthew Z; McDermott, Michael W; Lau, Catherine Y; Aghi, Manish K

2016-01-01

On-time starts for the first case of the day are critical to maintaining efficiency in operating rooms (ORs). We studied whether a resident-led initiative to ensure on-time site marking and documentation of surgical consent could lead to improved first-case start time. In a resident-led initiative at a large 600-bed academic hospital with 25 ORs, we aimed to complete site marking and surgical consents half an hour before the scheduled start time for all first-case neurosurgical patients. We monitored the occurrence of delayed first starts and the length of delay during our initiative, and compared these cases to neurosurgical cases 3 months before the implementation of the initiative and to first-start nonneurosurgical cases. In the year of the initiative, both site marking and surgical consents were completed 30 minutes before the case start in 97% of neurosurgical cases. The average delay across all first-case starts was reduced to 7.17 minutes (N = 1271), compared with 9.67 minutes before the intervention (N = 345). During the study period, non-neurosurgical cases were delayed on average 10.3 minutes (N = 3592). There was a significant difference in latencies between the study period and the period before the initiative (p < 0.001), and also between neurosurgical cases and nonneurosurgical cases (p < 0.001). There was no reduction in delay times seen on the non-neurosurgical services in the study period when compared to the case 3 months before. Considering its effect across 1271 cases, this initiative over 1 year resulted in a total reduction of 52 hours and 57 minutes in delays. Through a resident-led quality improvement program, neurosurgical trainees successfully reduced delays in first-case starts on a surgical service. Engaging physician trainees in quality improvement and enhancing OR efficiency can be successfully achieved and can have a significant clinical and financial effect. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Climatic interpretation of the length fluctuations of Glaciar Frías, North Patagonia, Argentina

NASA Astrophysics Data System (ADS)

Leclercq, P. W.; Pitte, P.; Giesen, R. H.; Masiokas, M. H.; Oerlemans, J.

2011-10-01

We explore the climatic information contained in the record of length fluctuations of Glaciar Frías, in the North Patagonian Andes of Argentina. This record is one of the longest and most detailed glacier records in southern South America, starting in 1639. In order to interpret the length variations of Glaciar Frías since the maximum Little Ice Age extent in 1639, we use a combination of a simplified surface energy-balance model to calculate the glacier mass balance, and a flow-line model to account for the dynamical response of the glacier to changes in the climatic forcing. The overall retreat of the glacier observed over 1639-2009 is best explained by an annual mean temperature increase of 1.16 °C or a decrease in annual precipitation of 34%, most of which would have occurred during the 20th century. The glacier model is also forced with independent proxy-based reconstructions of precipitation and temperature, based on tree rings and a composition of documentary evidence, tree rings, sediments, corals, and ice cores. The uncertainties in the presently available proxy reconstructions are rather large, leading to a wide range in the modelled glacier length. Most of the observations lie within this range. However, in these reconstructions, the mid-17th century is too cold and the early 19th century ca. 0.7 °C too warm to explain the observed glacier lengths.

Comparative analysis of genetic architectures for nine developmental traits of rye.

PubMed

Masojć, Piotr; Milczarski, P; Kruszona, P

2017-08-01

Genetic architectures of plant height, stem thickness, spike length, awn length, heading date, thousand-kernel weight, kernel length, leaf area and chlorophyll content were aligned on the DArT-based high-density map of the 541 × Ot1-3 RILs population of rye using the genes interaction assorting by divergent selection (GIABDS) method. Complex sets of QTL for particular traits contained 1-5 loci of the epistatic D class and 10-28 loci of the hypostatic, mostly R and E classes controlling traits variation through D-E or D-R types of two-loci interactions. QTL were distributed on each of the seven rye chromosomes in unique positions or as a coinciding loci for 2-8 traits. Detection of considerable numbers of the reversed (D', E' and R') classes of QTL might be attributed to the transgression effects observed for most of the studied traits. First examples of E* and F QTL classes, defined in the model, are reported for awn length, leaf area, thousand-kernel weight and kernel length. The results of this study extend experimental data to 11 quantitative traits (together with pre-harvest sprouting and alpha-amylase activity) for which genetic architectures fit the model of mechanism underlying alleles distribution within tails of bi-parental populations. They are also a valuable starting point for map-based search of genes underlying detected QTL and for planning advanced marker-assisted multi-trait breeding strategies.

Minimizing inner product data dependencies in conjugate gradient iteration

NASA Technical Reports Server (NTRS)

Vanrosendale, J.

1983-01-01

The amount of concurrency available in conjugate gradient iteration is limited by the summations required in the inner product computations. The inner product of two vectors of length N requires time c log(N), if N or more processors are available. This paper describes an algebraic restructuring of the conjugate gradient algorithm which minimizes data dependencies due to inner product calculations. After an initial start up, the new algorithm can perform a conjugate gradient iteration in time c*log(log(N)).

Mapping the Conjugate Gradient Algorithm onto High Performance Heterogeneous Computers

DTIC Science & Technology

2014-05-01

Matrix Storage Formats According to J . Dongarra (Dongerra 2000), the efficiency of most iterative methods, such as CG, can be attributed to the...valh = aij) ⇒ (colh = j ). The ptr integer vector is of length n + 1 and contains the index in val where each matrix row starts. For example, the...first nonzero element of matrix rowm is found at index ptrm of val. By convention, ptrn+1 ≡ nz + 1. Notice that (aij) ⇒ (ptri ≤ j < ptri+1) for all i. An

Size Determination of Y2O3 Crystallites in MgO Composite Using Mie Scattering

DTIC Science & Technology

2017-11-07

particle size, and the path length through the material to generate an expected light transmission spectrum. These calculated curves were compared to...materials. In the current work, light transmission data are compared to the theoretical curves generated by the Mie scattering model in an attempt to...Since the authors wanted to compare the model’s predictions to the experimental %T values, it seemed logical to start with Beer’s Law: )exp()1( 2

Computer Programming Manual for the Jovial (J73) Language

DTIC Science & Technology

1981-06-01

in function is: C - BYTE("ABCDEFŕ ,2,3); The built-in function extracts "BCD" from the string "ABCDEF". ( - 9 - 1: introduction ’ Two of the built...Tabl,’ Declarations Oil -fIt Chapter 8 BLOCK DECLARATIONS A block groups items, tables, and other blocks into contiguous storage. A block also gives a...substring to be extracted starts. Length specifies the number of bits in the subetring. Bits in a bit string are numbered from left to right, beginning with

Fatigue Variability of a Single Crystal Superalloy at Elevated Temperature (Preprint)

DTIC Science & Technology

2009-03-01

cast slabs of PWA 1484 with the primary longitudinal axis in the > direction (±5 °). The dogbone specimens had a 6 mm gage length and 4 mm...literature concerning the fatigue properties of PWA 1484. It has been reported that fatigue failures often start from eutectics and carbides [ 4 , 6 ...COVERED (From - To) March 2009 Journal Article Preprint 01 March 2009 – 01 March 2009 4 . TITLE AND SUBTITLE FATIGUE VARIABILITY OF A SINGLE CRYSTAL

Polarization Considerations for the Laser Interferometer Space Antenna

NASA Technical Reports Server (NTRS)

Waluschka, Eugene; Pedersen, Tracy R.; McNamara, Paul

2005-01-01

A polarization ray trace model of the Laser Interferometer Space Antenna s (LISA) optical path is being created. The model will be able to assess the effects of various polarizing elements and the optical coatings on the required, very long path length, picometer level dynamic interferometry. The computational steps are described. This should eliminate any ambiguities associated with polarization ray tracing of interferometers and provide a basis for determining the computer model s limitations and serve as a clearly defined starting point for future work.

Augmenting Comprehension of Speech in Noise with a Facial Avatar and Its Effect on Performance

DTIC Science & Technology

2010-12-01

develop some aspects of speech more slowly than sighted children. In addition to “bleeping” or blanking the sound of censored words, network...the speech. Movie files were exported at a resolution of 600 by 800 pixels at 30 frames per second and were four seconds in length. It should be...noted that the speech, and synchronized facial movements, began one second after each movie file started. This delay was designed to ensure that the

A Synchronous Digital Duplexing Technique for OFDMA-Based Indoor Communications

NASA Astrophysics Data System (ADS)

Park, Chang-Hwan; Ko, Yo-Han; Kim, Yeong-Jun; Park, Kyung-Won; Jeon, Won-Gi; Paik, Jong-Ho; Lee, Seok-Pil; Cho, Yong-Soo

In this paper, we propose a new digital duplexing scheme, called synchronous digital duplexing (SDD), which can increase data efficiency and flexibility of resource by transmitting uplink signal and downlink signal simultaneously in wireless communication. In order to transmit uplink and downlink signals simultaneously, the proposed SDD obtains mutual information among subscriber stations (SSs) with a mutual ranging symbol. This information is used for selection of transmission time, decision on cyclic suffix (CS) insertion, determination of CS length, and re-establishment of FFT starting point.

Trends in discharge and flow season timing of the Onyx River, Wright Valley, Antarctica since 1969

USGS Publications Warehouse

Gooseff, Michael N.; McKnight, Diane M.; Doran, Peter T.; Lyons, W. Berry

2007-01-01

/decade at Vanda), and increasing flow season lengths (by 7 d/decade at LWRT, and 2.7 d/decade at Vanda), influenced by earlier start and later end dates (5.2 and 0.8 d/decade, respectively at LWRT; 4.8, 1.4 d/decade, respectively at Vanda). This suggests that flow season climate patterns in the Dry Valleys are decreasing glacier melt intensity overall, but extending the period of meltwater generation

Analysis and Simulation of Narrowband GPS Jamming Using Digital Excision Temporal Filtering.

DTIC Science & Technology

1994-12-01

the sequence of stored values from the P- code sampled at a 20 MHz rate. When correlated with a reference vector of the same length to simulate a GPS ...rate required for the GPS signals, (20 MHz sampling rate for the P- code signal), the personal computer (PC) used run the simulation could not perform...This subroutine is used to perform a fast FFT based 168 biased cross correlation . Written by Capt Gerry Falen, USAF, 16 AUG 94 % start of code

The Relationship of Labor Pain, Medication Usage, and Length of Labor with Childbirth Preparation in Primigravidas.

DTIC Science & Technology

1992-01-01

of midwifery on the island of Borneo, according to legend, started when a husband and his pregnant wife were hunting food in the jungle. He came upon a...fully cemented the doctor- hospital-childbirth relationship (Tanzer & Block, 1972). The use of these drugs sometimes, instead of making the patient quiet...By the end of the 1960s, physicians were crying out to give less drugs during labor as these drugs were severely affecting the infants. Thus, the push

Evaluation of Start Transient Oscillations with the J-2X Engine Gas Generator Assembly

NASA Technical Reports Server (NTRS)

Hulka, J. R.; Morgan, C. J.; Casiano, M. J.

2015-01-01

During development of the gas generator for the liquid oxygen/liquid hydrogen propellant J-2X rocket engine, distinctive and oftentimes high-amplitude pressure oscillations and hardware vibrations occurred during the start transient of nearly every workhorse gas generator assembly test, as well as during many tests of engine system hardware. These oscillations appeared whether the steady-state conditions exhibited stable behavior or not. They occurred similarly with three different injector types, and with every combustion chamber configuration tested, including chamber lengths ranging over a 5:1 range, several different nozzle types, and with or without a side branch line simulating a turbine spin start gas supply line. Generally, two sets of oscillations occurred, one earlier in the start transient and at higher frequencies, and the other almost immediately following and at lower frequencies. Multiple dynamic pressure measurements in the workhorse combustion chambers indicated that the oscillations were associated with longitudinal acoustic modes of the combustion chambers, with the earlier and higher frequency oscillation usually related to the second longitudinal acoustic mode and the later and lower frequency oscillation usually related to the first longitudinal acoustic mode. Given that several early development gas generator assemblies exhibited unstable behavior at frequencies near the first longitudinal acoustic modes of longer combustion chambers, the start transient oscillations are presumed to provide additional insight into the nature of the combustion instability mechanisms. Aspects of the steadystate oscillations and combustion instabilities from development and engine system test programs have been reported extensively in the three previous JANNAF Liquid Propulsion Subcommittee meetings (see references below). This paper describes the hardware configurations, start transient sequence operations, and transient and dynamic test data during the start transient. The implications of these results on previous analyses and understanding of the combustion instability observed during steady-state conditions, especially the effects of injector influences, is discussed.

Equine welfare: risk of horses falling in the Grand National.

PubMed

Proudman, Christopher; Pinchbeck, Gina; Clegg, Peter; French, Nigel

2004-03-25

As in other competitive sports, the famous Grand National steeplechase, which is held at Aintree in the United Kingdom and is watched by 600 million people worldwide, sometimes results in injury. By analysing data from the past 15 Grand National races (consisting of 560 starts by horses), we are able to identify several factors that are significantly associated with failure to complete the race: no previous experience of the course and its unique obstacles, unfavourable ground conditions (too soft or too hard), a large number of runners, and the length of the odds ('starting price'). We also find that there is an increased risk of falling at the first fence and at the jump known as Becher's Brook, which has a ditch on the landing side. Our findings indicate ways in which the Grand National could be made safer for horses and illustrate how epidemiological analysis might contribute to preventing injury in competitive sport.

The complete mitochondrial genome of Chinese green hydra, Hydra sinensis (Hydroida: Hydridae).

PubMed

Pan, Hong-Chun; Qian, Xiao-Cheng; Li, Ping; Li, Xiao-Fei; Wang, An-Tai

2014-02-01

The complete mitochondrial genome of Chinese green hydra, Hydra sinensis (Hydroida: Hydridae) is a linear molecule of 16,189 bp in length, containing 13 protein-coding genes, small and large subunit ribosomal RNAs, methionine and tryptophan transfer RNAs, a pseudogene consisting of a partial copy of COI and terminal sequences at two ends of the linear mitochondrial DNA. The A + T content of the overall base composition of H-strand is 77.2% (T: 41.7%; C: 10.9%; A: 35.5%; and G: 11.9%). COI and ND1 genes begin with GTG as start codon, while other 11 protein-coding genes start with a typical ATG initiation codon. COII, ATP8, ATP6, COIII, ND5, ND6, ND3, ND1, ND4 and COI genes are terminated with TAA as stop codon, ND4L ends with TAG, ND2 ends with TA and Cyt b ends with T.

Time-to-administration in postoperative chemotherapy for colorectal cancer: does minimally-invasive surgery help?

PubMed

Amore Bonapasta, Stefano; Checcacci, Paolo; Guerra, Francesco; Mirasolo, Vita M; Moraldi, Luca; Ferrara, Angelo; Annecchiarico, Mario; Coratti, Andrea

2016-06-01

The optimal delay in the start of chemotherapy following rectal cancer surgery has not yet been identified. However, postponed adjuvant therapy has been proven to be connected with a significant survival detriment. We aimed to investigate whether the time to initiation of adjuvant treatment can be influenced by the application of minimally invasive surgery rather than traditional open surgery. By comprehensively evaluating the available inherent literature, several factors appear to be associated with delayed postoperative chemotherapy. Some of them are strictly related to surgical short-term outcomes. Laparoscopy results in shortened length of hospital stay, reduced surgical morbidity and lower rate of wound infection compared to conventional surgery. Probably due to such advantages, the application of minimally-invasive surgery to treat rectal malignancies seems to impact favorably the possibility to start adjuvant chemotherapy within an adequate timeframe following surgical resection, with potential improvement in patient survival.

Operation of polycarbonate projectiles in the ram accelerator

NASA Astrophysics Data System (ADS)

Elder, Timothy

The ram accelerator is a hypervelocity launcher with direct space launch applications in which a sub-caliber projectile, analogous to the center-body of a ramjet engine, flies through fuel and oxidizer that have been premixed in a tube. Shock interactions in the tube ignite the propellant upon entrance of the projectile and the combustion travels with it, creating thrust on the projectile by stabilizing a high pressure region of gas behind it. Conventional ram accelerator projectiles consist of aluminum, magnesium, or titanium nosecones and bodies. An experimental program has been undertaken to determine the performance of polycarbonate projectiles in ram accelerator operation. Experimentation using polycarbonate projectiles has been divided into two series: determining the lower limit for starting velocity (i.e., less than 1100 m/s) and investigating the upper velocity limit. To investigate the influence of body length and starting velocity, a newly developed "combustion gun" was used to launch projectiles to their initial velocities. The combustion gun uses 3-6 m of ram accelerator test section as a breech and 4-6 m of the ram accelerator test section as a launch tube. A fuel-oxidizer mix is combusted in the breech using a spark plug or electric match and bursts a diaphragm, accelerating the ram projectile to its entrance velocity. The combustion gun can be operated at modest fill pressures (20 bar) but can only launch to relatively low velocities (approximately 1000 m/s) without destroying the projectile and obturator upon launch. Projectiles were successfully started at entrance velocities as low as 810 m/s and projectile body lengths as long as 91 mm were used. The tests investigating the upper Mach number limits of polycarbonate projectiles used the conventional single-stage light-gas gun because of its ability to reach higher velocities with a lower acceleration launch. It was determined that polycarbonate projectiles have an upper velocity limit in the range of 1500-1550 m/s which is lower than that of magnesium projectiles.

Prevention of Hospital-Acquired Adverse Drug Reactions in Older People Using Screening Tool of Older Persons' Prescriptions and Screening Tool to Alert to Right Treatment Criteria: A Cluster Randomized Controlled Trial.

PubMed

O'Connor, Marie N; O'Sullivan, David; Gallagher, Paul F; Eustace, Joseph; Byrne, Stephen; O'Mahony, Denis

2016-08-01

To determine whether use of the Screening Tool of Older Persons' Prescriptions (STOPP) and Screening Tool to Alert to Right Treatment (START) criteria reduces incident hospital-acquired adverse drug reactions (ADRs), 28-day medication costs, and median length of hospital stay in older adults admitted with acute illness. Single-blind cluster randomized controlled trial (RCT) of unselected older adults hospitalized over a 13-month period. Tertiary referral hospital in southern Ireland. Consecutively admitted individuals aged 65 and older (N = 732). Single time point presentation to attending physicians of potentially inappropriate medications according to the STOPP/START criteria. The primary outcome was the proportion of participants experiencing one or more ADRs during the index hospitalization. Secondary outcomes were median length of stay (LOS) and 28-day total medication cost. One or more ADRs occurred in 78 of the 372 control participants (21.0%; median age 78, interquartile range (IQR) 72-84) and in 42 of the 360 intervention participants (11.7%; median age 80, IQR 73-85) (absolute risk reduction = 9.3%, number needed to treat = 11). The median LOS in the hospital was 8 days (IQR 4-14 days) in both groups. At discharge, median medication cost was significantly lower in the intervention group (€73.16, IQR €38.68-121.72) than in the control group (€90.62, IQR €49.38-162.53) (Wilcoxon rank test Z statistic = -3.274, P < .001). Application of STOPP/START criteria resulted in significant reductions in ADR incidence and medication costs in acutely ill older adults but did not affect median LOS. © 2016, Copyright the Authors Journal compilation © 2016, The American Geriatrics Society.

GTG mutation in the start codon of the androgen receptor gene in a family of horses with 64,XY disorder of sex development.

PubMed

Révay, T; Villagómez, D A F; Brewer, D; Chenier, T; King, W A

2012-01-01

Genetic sex in mammals is determined by the sex chromosomal composition of the zygote. The X and Y chromosomes are responsible for numerous factors that must work in close concert for the proper development of a healthy sexual phenotype. The role of androgens in case of XY chromosomal constitution is crucial for normal male sex differentiation. The intracellular androgenic action is mediated by the androgen receptor (AR), and its impaired function leads to a myriad of syndromes with severe clinical consequences, most notably androgen insensitivity syndrome and prostate cancer. In this paper, we investigated the possibility that an alteration of the equine AR gene explains a recently described familial XY, SRY + disorder of sex development. We uncovered a transition in the first nucleotide of the AR start codon (c.1A>G). To our knowledge, this represents the first causative AR mutation described in domestic animals. It is also a rarely observed mutation in eukaryotes and is unique among the >750 entries of the human androgen receptor mutation database. In addition, we found another quiet missense mutation in exon 1 (c.322C>T). Transcription of AR was confirmed by RT-PCR amplification of several exons. Translation of the full-length AR protein from the initiating GTG start codon was confirmed by Western blot using N- and C-terminal-specific antibodies. Two smaller peptides (25 and 14 amino acids long) were identified from the middle of exon 1 and across exons 5 and 6 by mass spectrometry. Based upon our experimental data and the supporting literature, it appears that the AR is expressed as a full-length protein and in a functional form, and the observed phenotype is the result of reduced AR protein expression levels. Copyright © 2011 S. Karger AG, Basel.

Laying sequence interacts with incubation temperature to influence rate of embryonic development and hatching synchrony in a precocial bird.

PubMed

Hepp, Gary R; Kennamer, Robert A

2018-01-01

Incubation starts during egg laying for many bird species and causes developmental asynchrony within clutches. Faster development of late-laid eggs can help reduce developmental differences and synchronize hatching, which is important for precocial species whose young must leave the nest soon after hatching. In this study, we examined the effect of egg laying sequence on length of the incubation period in Wood Ducks (Aix sponsa). Because incubation temperature strongly influences embryonic development rates, we tested the interactive effects of laying sequence and incubation temperature on the ability of late-laid eggs to accelerate development and synchronize hatching. We also examined the potential cost of faster development on duckling body condition. Fresh eggs were collected and incubated at three biologically relevant temperatures (Low: 34.9°C, Medium: 35.8°C, and High: 37.6°C), and egg laying sequences from 1 to 12 were used. Length of the incubation period declined linearly as laying sequence advanced, but the relationship was strongest at medium temperatures followed by low temperatures and high temperatures. There was little support for including fresh egg mass in models of incubation period. Estimated differences in length of the incubation period between eggs 1 and 12 were 2.7 d, 1.2 d, and 0.7 d at medium, low and high temperatures, respectively. Only at intermediate incubation temperatures did development rates of late-laid eggs increase sufficiently to completely compensate for natural levels of developmental asynchrony that have been reported in Wood Duck clutches at the start of full incubation. Body condition of ducklings was strongly affected by fresh egg mass and incubation temperature but declined only slightly as laying sequence progressed. Our findings show that laying sequence and incubation temperature play important roles in helping to shape embryo development and hatching synchrony in a precocial bird.

Laying sequence interacts with incubation temperature to influence rate of embryonic development and hatching synchrony in a precocial bird

PubMed Central

Kennamer, Robert A.

2018-01-01

Incubation starts during egg laying for many bird species and causes developmental asynchrony within clutches. Faster development of late-laid eggs can help reduce developmental differences and synchronize hatching, which is important for precocial species whose young must leave the nest soon after hatching. In this study, we examined the effect of egg laying sequence on length of the incubation period in Wood Ducks (Aix sponsa). Because incubation temperature strongly influences embryonic development rates, we tested the interactive effects of laying sequence and incubation temperature on the ability of late-laid eggs to accelerate development and synchronize hatching. We also examined the potential cost of faster development on duckling body condition. Fresh eggs were collected and incubated at three biologically relevant temperatures (Low: 34.9°C, Medium: 35.8°C, and High: 37.6°C), and egg laying sequences from 1 to 12 were used. Length of the incubation period declined linearly as laying sequence advanced, but the relationship was strongest at medium temperatures followed by low temperatures and high temperatures. There was little support for including fresh egg mass in models of incubation period. Estimated differences in length of the incubation period between eggs 1 and 12 were 2.7 d, 1.2 d, and 0.7 d at medium, low and high temperatures, respectively. Only at intermediate incubation temperatures did development rates of late-laid eggs increase sufficiently to completely compensate for natural levels of developmental asynchrony that have been reported in Wood Duck clutches at the start of full incubation. Body condition of ducklings was strongly affected by fresh egg mass and incubation temperature but declined only slightly as laying sequence progressed. Our findings show that laying sequence and incubation temperature play important roles in helping to shape embryo development and hatching synchrony in a precocial bird. PMID:29373593

Effects of climate change on water requirements and phenological period of major crops in Heihe River basin, China - Based on the accumulated temperature threshold method

NASA Astrophysics Data System (ADS)

Han, Dongmei; Xu, Xinyi; Yan, Denghua

2016-04-01

In recent years, global climate change has significantly caused a serious crisis of water resources throughout the world. However, mainly through variations in temperature, climate change will affect water requirements of crop. It is obvious that the rise of temperature affects growing period and phenological period of crop directly, then changes the water demand quota of crop. Methods including accumulated temperature threshold and climatic tendency rate were adopted, which made up for the weakness of phenological observations, to reveal the response of crop phenological change during the growing period. Then using Penman-Menteith model and crop coefficients from the United Nations Food& Agriculture Organization (FAO), the paper firstly explored crop water requirements in different growth periods, and further forecasted quantitatively crop water requirements in Heihe River Basin, China under different climate change scenarios. Results indicate that: (i) The results of crop phenological change established in the method of accumulated temperature threshold were in agreement with measured results, and (ii) there were many differences in impacts of climate warming on water requirement of different crops. The growth periods of wheat and corn had tendency of shortening as well as the length of growth periods. (ii)Results of crop water requirements under different climate change scenarios showed: when temperature increased by 1°C, the start time of wheat growth period changed, 2 days earlier than before, and the length of total growth period shortened 2 days. Wheat water requirements increased by 1.4mm. However, corn water requirements decreased by almost 0.9mm due to the increasing temperature of 1°C. And the start time of corn growth period become 3 days ahead, and the length of total growth period shortened 4 days. Therefore, the contradiction between water supply and water demands are more obvious under the future climate warming in Heihe River Basin, China.

How much DNA is lost? Measuring DNA loss of short-tandem-repeat length fragments targeted by the PowerPlex 16® system using the Qiagen MinElute Purification Kit.

PubMed

Kemp, Brian M; Winters, Misa; Monroe, Cara; Barta, Jodi Lynn

2014-01-01

The success in recovering genetic profiles from aged and degraded biological samples is diminished by fundamental aspects of DNA extraction, as well as its long-term preservation, that are not well understood. While numerous studies have been conducted to determine whether one extraction method was superior to others, nearly all of them were initiated with no knowledge of the actual starting DNA quantity in the samples prior to extraction, so they ultimately compared the outcome of all methods relative to the best. Using quantitative PCR to estimate the copy count of synthetic standards before (i.e., "copies in") and after (i.e., "copies out") purification by the Qiagen MinElute PCR Purification Kit, we documented DNA loss within a pool of 16 different-sized fragments ranging from 106 to 409 bp in length, corresponding to those targeted by the PowerPlex 16 System (Promega, Madison, WI). Across all standards from 10(4) to 10(7) copies/μL, loss averaged between 21.75% and 60.56% (mean, 39.03%), which is not congruent with Qiagen's claim that 80% of 70 bp to 4 kb fragments are retained using this product (i.e., 20% loss). Our study also found no clear relationship either between DNA strand length and retention or between starting copy number and retention. This suggests that there is no molecule bias across the MinElute column membrane and highlights the need for manufacturers to clearly and accurately describe on what their claims are based, and should also encourage researchers to document DNA retention efficiencies of their own methods and protocols. Understanding how and where to reduce loss of molecules during extraction and purification will serve to generate clearer and more accurate data, which will enhance the utility of ancient and low-copy-number DNA as a tool for closing forensic cases or in reconstructing the evolutionary history of humans and other organisms.

Restoration of energy level in the early phase of acute pediatric pancreatitis.

PubMed

Mosztbacher, Dóra; Farkas, Nelli; Solymár, Margit; Pár, Gabriella; Bajor, Judit; Szűcs, Ákos; Czimmer, József; Márta, Katalin; Mikó, Alexandra; Rumbus, Zoltán; Varjú, Péter; Hegyi, Péter; Párniczky, Andrea

2017-02-14

Acute pancreatitis (AP) is a serious inflammatory disease with rising incidence both in the adult and pediatric populations. It has been shown that mitochondrial injury and energy depletion are the earliest intracellular events in the early phase of AP. Moreover, it has been revealed that restoration of intracellular ATP level restores cellular functions and defends the cells from death. We have recently shown in a systematic review and meta-analysis that early enteral feeding is beneficial in adults; however, no reviews are available concerning the effect of early enteral feeding in pediatric AP. In this minireview, our aim was to systematically analyse the literature on the treatment of acute pediatric pancreatitis. The preferred reporting items for systematic review (PRISMA-P) were followed, and the question was drafted based on participants, intervention, comparison and outcomes: P: patients under the age of twenty-one suffering from acute pancreatitis; I: early enteral nutrition (per os and nasogastric- or nasojejunal tube started within 48 h); C: nil per os therapy; O: length of hospitalization, need for treatment at an intensive care unit, development of severe AP, lung injury (including lung oedema and pleural effusion), white blood cell count and pain score on admission. Altogether, 632 articles (PubMed: 131; EMBASE: 501) were found. After detailed screening of eligible papers, five of them met inclusion criteria. Only retrospective clinical trials were available. Due to insufficient information from the authors, it was only possible to address length of hospitalization as an outcome of the study. Our mini-meta-analysis showed that early enteral nutrition significantly (SD = 0.806, P = 0.034) decreases length of hospitalization compared with nil per os diet in acute pediatric pancreatitis. In this minireview, we clearly show that early enteral nutrition, started within 24-48 h, is beneficial in acute pediatric pancreatitis. Prospective studies and better presentation of research are crucially needed to achieve a higher level of evidence.

Restoration of energy level in the early phase of acute pediatric pancreatitis

PubMed Central

Mosztbacher, Dóra; Farkas, Nelli; Solymár, Margit; Pár, Gabriella; Bajor, Judit; Szűcs, Ákos; Czimmer, József; Márta, Katalin; Mikó, Alexandra; Rumbus, Zoltán; Varjú, Péter; Hegyi, Péter; Párniczky, Andrea

2017-01-01

Acute pancreatitis (AP) is a serious inflammatory disease with rising incidence both in the adult and pediatric populations. It has been shown that mitochondrial injury and energy depletion are the earliest intracellular events in the early phase of AP. Moreover, it has been revealed that restoration of intracellular ATP level restores cellular functions and defends the cells from death. We have recently shown in a systematic review and meta-analysis that early enteral feeding is beneficial in adults; however, no reviews are available concerning the effect of early enteral feeding in pediatric AP. In this minireview, our aim was to systematically analyse the literature on the treatment of acute pediatric pancreatitis. The preferred reporting items for systematic review (PRISMA-P) were followed, and the question was drafted based on participants, intervention, comparison and outcomes: P: patients under the age of twenty-one suffering from acute pancreatitis; I: early enteral nutrition (per os and nasogastric- or nasojejunal tube started within 48 h); C: nil per os therapy; O: length of hospitalization, need for treatment at an intensive care unit, development of severe AP, lung injury (including lung oedema and pleural effusion), white blood cell count and pain score on admission. Altogether, 632 articles (PubMed: 131; EMBASE: 501) were found. After detailed screening of eligible papers, five of them met inclusion criteria. Only retrospective clinical trials were available. Due to insufficient information from the authors, it was only possible to address length of hospitalization as an outcome of the study. Our mini-meta-analysis showed that early enteral nutrition significantly (SD = 0.806, P = 0.034) decreases length of hospitalization compared with nil per os diet in acute pediatric pancreatitis. In this minireview, we clearly show that early enteral nutrition, started within 24-48 h, is beneficial in acute pediatric pancreatitis. Prospective studies and better presentation of research are crucially needed to achieve a higher level of evidence. PMID:28246469

The mandibular symphysis as a starting point for the occlusal-level reconstruction of panfacial fractures with bicondylar fractures and interruption of the maxillary and mandibular arches: report of two cases.

PubMed

Pau, Mauro; Reinbacher, Knut Ernst; Feichtinger, Matthias; Navysany, Kawe; Kärcher, Hans

2014-06-01

Panfacial fractures represent a challenge, even for experienced maxillofacial surgeons, because all references for reconstructing the facial skeleton are missing. Logical reconstructive sequencing based on a clear understanding of the correlation between projection and the widths and lengths of facial subunits should enable the surgeon to achieve correct realignment of the bony framework of the face and to prevent late deformity and functional impairment. Reconstruction is particularly challenging in patients presenting with concomitant fractures at the Le Fort I level and affecting the palate, condyles, and mandibular symphysis. In cases without bony loss and sufficient dentition, we believe that accurate fixation of the mandibular symphysis can represent the starting point of a reconstructive sequence that allows successful reconstruction at the Le Fort I level. Two patients were treated in our department by reconstruction starting in the occlusal area through repair of the mandibular symphysis. Both patients considered the postoperative facial shape and profile to be satisfactory and comparable to the pre-injury situation. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Homopolymer tail-mediated ligation PCR: a streamlined and highly efficient method for DNA cloning and library construction.

PubMed

Lazinski, David W; Camilli, Andrew

2013-01-01

The amplification of DNA fragments, cloned between user-defined 5' and 3' end sequences, is a prerequisite step in the use of many current applications including massively parallel sequencing (MPS). Here we describe an improved method, called homopolymer tail-mediated ligation PCR (HTML-PCR), that requires very little starting template, minimal hands-on effort, is cost-effective, and is suited for use in high-throughput and robotic methodologies. HTML-PCR starts with the addition of homopolymer tails of controlled lengths to the 3' termini of a double-stranded genomic template. The homopolymer tails enable the annealing-assisted ligation of a hybrid oligonucleotide to the template's recessed 5' ends. The hybrid oligonucleotide has a user-defined sequence at its 5' end. This primer, together with a second primer composed of a longer region complementary to the homopolymer tail and fused to a second 5' user-defined sequence, are used in a PCR reaction to generate the final product. The user-defined sequences can be varied to enable compatibility with a wide variety of downstream applications. We demonstrate our new method by constructing MPS libraries starting from nanogram and sub-nanogram quantities of Vibrio cholerae and Streptococcus pneumoniae genomic DNA.

The complete mitochondrial genome and phylogenetic analysis of the giant panda (Ailuropoda melanoleuca).

PubMed

Peng, Rui; Zeng, Bo; Meng, Xiuxiang; Yue, Bisong; Zhang, Zhihe; Zou, Fangdong

2007-08-01

The complete mitochondrial genome sequence of the giant panda, Ailuropoda melanoleuca, was determined by the long and accurate polymerase chain reaction (LA-PCR) with conserved primers and primer walking sequence methods. The complete mitochondrial DNA is 16,805 nucleotides in length and contains two ribosomal RNA genes, 13 protein-coding genes, 22 transfer RNA genes and one control region. The total length of the 13 protein-coding genes is longer than the American black bear, brown bear and polar bear by 3 amino acids at the end of ND5 gene. The codon usage also followed the typical vertebrate pattern except for an unusual ATT start codon, which initiates the NADH dehydrogenase subunit 5 (ND5) gene. The molecular phylogenetic analysis was performed on the sequences of 12 concatenated heavy-strand encoded protein-coding genes, and suggested that the giant panda is most closely related to bears.

The fundamental downscaling limit of field effect transistors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mamaluy, Denis, E-mail: mamaluy@sandia.gov; Gao, Xujiao

2015-05-11

We predict that within next 15 years a fundamental down-scaling limit for CMOS technology and other Field-Effect Transistors (FETs) will be reached. Specifically, we show that at room temperatures all FETs, irrespective of their channel material, will start experiencing unacceptable level of thermally induced errors around 5-nm gate lengths. These findings were confirmed by performing quantum mechanical transport simulations for a variety of 6-, 5-, and 4-nm gate length Si devices, optimized to satisfy high-performance logic specifications by ITRS. Different channel materials and wafer/channel orientations have also been studied; it is found that altering channel-source-drain materials achieves only insignificant increasemore » in switching energy, which overall cannot sufficiently delay the approaching downscaling limit. Alternative possibilities are discussed to continue the increase of logic element densities for room temperature operation below the said limit.« less

Where hearing starts: the development of the mammalian cochlea.

PubMed

Basch, Martin L; Brown, Rogers M; Jen, Hsin-I; Groves, Andrew K

2016-02-01

The mammalian cochlea is a remarkable sensory organ, capable of perceiving sound over a range of 10(12) in pressure, and discriminating both infrasonic and ultrasonic frequencies in different species. The sensory hair cells of the mammalian cochlea are exquisitely sensitive, responding to atomic-level deflections at speeds on the order of tens of microseconds. The number and placement of hair cells are precisely determined during inner ear development, and a large number of developmental processes sculpt the shape, size and morphology of these cells along the length of the cochlear duct to make them optimally responsive to different sound frequencies. In this review, we briefly discuss the evolutionary origins of the mammalian cochlea, and then describe the successive developmental processes that lead to its induction, cell cycle exit, cellular patterning and the establishment of topologically distinct frequency responses along its length. © 2015 Anatomical Society.

Graphene Statistical Mechanics

NASA Astrophysics Data System (ADS)

Bowick, Mark; Kosmrlj, Andrej; Nelson, David; Sknepnek, Rastko

2015-03-01

Graphene provides an ideal system to test the statistical mechanics of thermally fluctuating elastic membranes. The high Young's modulus of graphene means that thermal fluctuations over even small length scales significantly stiffen the renormalized bending rigidity. We study the effect of thermal fluctuations on graphene ribbons of width W and length L, pinned at one end, via coarse-grained Molecular Dynamics simulations and compare with analytic predictions of the scaling of width-averaged root-mean-squared height fluctuations as a function of distance along the ribbon. Scaling collapse as a function of W and L also allows us to extract the scaling exponent eta governing the long-wavelength stiffening of the bending rigidity. A full understanding of the geometry-dependent mechanical properties of graphene, including arrays of cuts, may allow the design of a variety of modular elements with desired mechanical properties starting from pure graphene alone. Supported by NSF grant DMR-1435794

The fundamental downscaling limit of field effect transistors

DOE PAGES

Mamaluy, Denis; Gao, Xujiao

2015-05-12

We predict that within next 15 years a fundamental down-scaling limit for CMOS technology and other Field-Effect Transistors (FETs) will be reached. Specifically, we show that at room temperatures all FETs, irrespective of their channel material, will start experiencing unacceptable level of thermally induced errors around 5-nm gate lengths. These findings were confirmed by performing quantum mechanical transport simulations for a variety of 6-, 5-, and 4-nm gate length Si devices, optimized to satisfy high-performance logic specifications by ITRS. Different channel materials and wafer/channel orientations have also been studied; it is found that altering channel-source-drain materials achieves only insignificant increasemore » in switching energy, which overall cannot sufficiently delay the approaching downscaling limit. Alternative possibilities are discussed to continue the increase of logic element densities for room temperature operation below the said limit.« less

Documentation of a restart option for the U.S. Geological Survey coupled Groundwater and Surface-Water Flow (GSFLOW) model

USGS Publications Warehouse

Regan, R. Steve; Niswonger, Richard G.; Markstrom, Steven L.; Barlow, Paul M.

2015-10-02

The spin-up simulation should be run for a sufficient length of time necessary to establish antecedent conditions throughout a model domain. Each GSFLOW application can require different lengths of time to account for the hydrologic stresses to propagate through a coupled groundwater and surface-water system. Typically, groundwater hydrologic processes require many years to come into equilibrium with dynamic climate and other forcing (or stress) data, such as precipitation and well pumping, whereas runoff-dominated surface-water processes respond relatively quickly. Use of a spin-up simulation can substantially reduce execution-time requirements for applications where the time period of interest is small compared to the time for hydrologic memory; thus, use of the restart option can be an efficient strategy for forecast and calibration simulations that require multiple simulations starting from the same day.

Morphology and magnetic properties of CeCo5 submicron flakes prepared by surfactant-assisted high-energy ball milling

NASA Astrophysics Data System (ADS)

Zhang, J. J.; Gao, H. M.; Yan, Y.; Bai, X.; Su, F.; Wang, W. Q.; Du, X. B.

2012-10-01

CeCo5 permanent magnetic alloy has been processed by surfactant assisted high energy ball milling. Heptane and oleic acid were used as the solvent and surfactant, respectively. The amount of surfactant used was 50% by weight of the starting powder. The produced particles were deposited on a piece of copper (4 mm in length and width) under a magnetic field of 27 kOe applied along the copper surface and immobilized by ethyl α-cyanoacrylate. Scanning electron microscope pictures show that the particles are flakes, several μm in length and width and tens of nm in thickness. X-ray diffraction patterns and magnetic measurements prove that the flakes are crystalline with c-axes magnetic anisotropy. The easy magnetization axis is oriented perpendicular to the surface of the flake. A maximum coercivity of 3.3 kOe was obtained for the sample milled for 40 min.

He-Ne Laser Acupuncture: Treatment Of Rhinopharyngeal Infection.

NASA Astrophysics Data System (ADS)

Dussert, Dr.

1984-03-01

Ladies and gentlemen, 23 months ago I treated the following emergency cases in my surgery : 1) A man of 53 suffering from dyspnoea (clinically speaking he was a case of exniratory bradypnoea). He had just been hospitalised for a month and had been undergoing cortisone treatment. I made him sit, and b/ irradiating each of the stellar ganglions for six minutes by laser at an impulse wave length of 6 in low frequency I freed up this patient, who started to breathe normally. 2) Some time after this : A child of 7 came to see me. He was suffering from an attack of asthma. I passed each of the stellar ganglions under the laser at impulse wave length 6 in low frequency for 4 minutes. The child witnes ed his attack calming down. In view of these two cases I decided to organise a research project.

Buckling instability in amorphous carbon films

NASA Astrophysics Data System (ADS)

Zhu, X. D.; Narumi, K.; Naramoto, H.

2007-06-01

In this paper, we report the buckling instability in amorphous carbon films on mirror-polished sapphire (0001) wafers deposited by ion beam assisted deposition at various growth temperatures. For the films deposited at 150 °C, many interesting stress relief patterns are found, which include networks, blisters, sinusoidal patterns with π-shape, and highly ordered sinusoidal waves on a large scale. Starting at irregular buckling in the centre, the latter propagate towards the outer buckling region. The maximum length of these ordered patterns reaches 396 µm with a height of ~500 nm and a wavelength of ~8.2 µm. However, the length decreases dramatically to 70 µm as the deposition temperature is increased to 550 °C. The delamination of the film appears instead of sinusoidal waves with a further increase of the deposition temperature. This experimental observation is correlated with the theoretic work of Crosby (1999 Phys. Rev. E 59 R2542).

Homology between Escherichia coli plasmids ColE1 and p15A.

PubMed Central

Bird, R E

1981-01-01

The location and extent of the homology between plasmids ColE1 and p15A were determined by analysis of heteroduplexes formed between them as well as with a related plasmid, pBR322, and by hybridization of radioactive deoxyribonucleic acids to restriction fragments of p15A and ColE1. The homology between the plasmids contained the entire region of ColE1 required for its replication as well as an additional 400 base pairs downstream from the origin of replication. This region on p15A, which was 980 +/- 43 base pairs, started at 0.1 of the molecular length from one end formed by cleavage with the restriction endonuclease BglI and extended to 0.54 of the molecular length from the same end. Restriction cleavage maps for the enzymes BglI, HpaI, HaeII, HaeIII, and HincII are also presented. Images PMID:6259130

Slow light enhanced gas sensing in photonic crystals

NASA Astrophysics Data System (ADS)

Kraeh, Christian; Martinez-Hurtado, J. L.; Popescu, Alexandru; Hedler, Harry; Finley, Jonathan J.

2018-02-01

Infrared spectroscopy allows for highly selective and highly sensitive detection of gas species and concentrations. Conventional gas spectrometers are generally large and unsuitable for on-chip applications. Long absorption path lengths are usually required and impose a challenge for miniaturization. In this work, a gas spectrometer is developed consisting of a microtube photonic crystal structure. This structure of millimetric form factors minimizes the required absorption path length due to slow light effects. The microtube photonic crystal allows for strong transmission in the mid-infrared and, due to its large void space fraction, a strong interaction between light and gas molecules. As a result, enhanced absorption of light increases the gas sensitivity of the device. Slow light enhanced gas absorption by a factor of 5.8 in is experimentally demonstrated at 5400 nm. We anticipate small form factor gas sensors on silicon to be a starting point for on-chip gas sensing architectures.

Advanced studies at the VISA FEL in the SASE and seeded modes

NASA Astrophysics Data System (ADS)

Andonian, G.; Dunning, M.; Hemsing, E.; Murokh, A.; Pellegrini, C.; Reiche, S.; Rosenzweig, J.; Babzien, M.; Yakimenko, V.

2008-08-01

The VISA (Visible to Infrared SASE Amplifier) program has been in operation at the BNL ATF since the year 2000. The program has produced numerous results including, demonstrated saturation at 840 nm with a gain length of 18 cm, chirped beam amplification with the observation of anomalously large bandwidth of the emitted radiation, and successful benchmarking of a start-to-end simulation suite to measured results. This paper will review the prior results of the VISA program and discuss planned novel measurements, including detuning studies of a 1 μm seeded amplifier, and measurements of the orbital angular momentum of the emitted radiation. The installation of a dedicated chicane bunch compressor followed by an x-band linac to mitigate energy spread will allow for high-current operations (reduced saturation length, and deep-saturation studies). Other measurements, such as coherent transition undulator radiation, are also proposed.

Using guided ultrasonic wave inspection to quantify the length of delaminations in composite laminates

NASA Astrophysics Data System (ADS)

Feng, Bo; Ribeiro, Artur Lopes; Ramos, Helena Geirinhas

2018-04-01

This paper presents a study of the characteristics of Lamb wave (S0 mode) testing signals in carbon fiber composite laminates containing delaminations. The study was implemented by using commercial finite element simulation software - ANSYS. The delamination signal is proven to be the superposition of the two waves travelling from upper and lower sub-laminates. Dispersion curves for the two sub-laminates were calculated to show the difference between phase velocities of the waves in the sub-laminates. Two models are specifically designed to get the phase difference between the waves that travel in each of the two sub-laminates. From the simulation results, it was found that the phase difference increases with the delamination length. Furthermore, the amplitude of delamination signal decreases first, then it starts to increase after reaching the minimum value. The minimum is reached when the waves from the two sub-laminates are 180° out of phase.

Complete mitochondrial genome of the Freshwater Whipray Himantura dalyensis.

PubMed

Feutry, Pierre; Kyne, Peter M; Peng, Zaiqing; Pan, Lianghao; Chen, Xiao

2016-05-01

The complete mitochondrial genome of the Freshwater Whipray Himantura dalyensis is presented in this study. It is 17,693 bp in length and contains 37 genes in typical gene order and transcriptional orientation observed in vertebrates. There were a total of 86 bp short intergenic spacers and 22 bp overlaps in the genome. The overall base composition was 31.4% A, 25.5% C, 13.2% G and 29.9% T. Two start codons (GTG and ATG) and two stop codons (TAG and TAA/T) were found in 13 protein-coding genes. The length of 22 tRNA genes ranged from 68 (tRNA-Cys and tRNA-Ser2) to 75 bp (tRNA-Leu1). The origin of L-strand replication (OL) was found between the tRNA-Asn and tRNA-Cys genes. The base composition of the control region (1940 bp) was similar to the whole mitogenome.

Models for forecasting the flowering of Cornicabra olive groves.

PubMed

Rojo, Jesús; Pérez-Badia, Rosa

2015-11-01

This study examined the impact of weather-related variables on flowering phenology in the Cornicabra olive tree and constructed models based on linear and Poisson regression to forecast the onset and length of the pre-flowering and flowering phenophases. Spain is the world's leading olive oil producer, and the Cornicabra variety is the second largest Spanish variety in terms of surface area. However, there has been little phenological research into this variety. Phenological observations were made over a 5-year period (2009-2013) at four sampling sites in the province of Toledo (central Spain). Results showed that the onset of the pre-flowering phase is governed largely by temperature, which displayed a positive correlation with the temperature in the start of dormancy (November) and a negative correlation during the months prior to budburst (January, February and March). A similar relationship was recorded for the onset of flowering. Other weather-related variables, including solar radiation and rainfall, also influenced the succession of olive flowering phenophases. Linear models proved the most suitable for forecasting the onset and length of the pre-flowering period and the onset of flowering. The onset and length of pre-flowering can be predicted up to 1 or 2 months prior to budburst, whilst the onset of flowering can be forecast up to 3 months beforehand. By contrast, a nonlinear model using Poisson regression was best suited to predict the length of the flowering period.

Reading difficulties in Albanian.

PubMed

Avdyli, Rrezarta; Cuetos, Fernando

2012-10-01

Albanian is an Indo-European language with a shallow orthography, in which there is an absolute correspondence between graphemes and phonemes. We aimed to know reading strategies used by Albanian disabled children during word and pseudoword reading. A pool of 114 Kosovar reading disabled children matched with 150 normal readers aged 6 to 11 years old were tested. They had to read 120 stimuli varied in lexicality, frequency, and length. The results in terms of reading accuracy as well as in reading times show that both groups were affected by lexicality and length effects. In both groups, length and lexicality effects were significantly modulated by school year being greater in early grades and later diminish in length and just the opposite in lexicality. However, the reading difficulties group was less accurate and slower than the control group across all school grades. Analyses of the error patterns showed that phonological errors, when the letter replacement leading to new nonwords, are the most common error type in both groups, although as grade rises, visual errors and lexicalizations increased more in the control group than the reading difficulties group. These findings suggest that Albanian normal children use both routes (lexical and sublexical) from the beginning of reading despite of the complete regularity of Albanian, while children with reading difficulties start using sublexical reading and the lexical reading takes more time to acquire, but finally both routes are functional.

X -band rf driven free electron laser driver with optics linearization

DOE PAGES

Sun, Yipeng; Emma, Paul; Raubenheimer, Tor; ...

2014-11-13

In this paper, a compact hard X-ray free electron lasers (FEL) design is proposed with all X-band rf acceleration and two stage bunch compression. It eliminates the need of a harmonic rf linearization section by employing optics linearization in its first stage bunch compression. Quadrupoles and sextupoles are employed in a bunch compressor one (BC1) design, in such a way that second order longitudinal dispersion of BC1 cancels the second order energy correlation in the electron beam. Start-to-end 6-D simulations are performed with all the collective effects included. Emittance growth in the horizontal plane due to coherent synchrotron radiation ismore » investigated and minimized, to be on a similar level with the successfully operating Linac coherent light source (LCLS). At a FEL radiation wavelength of 0.15 nm, a saturation length of 40 meters can be achieved by employing an undulator with a period of 1.5 cm. Without tapering, a FEL radiation power above 10 GW is achieved with a photon pulse length of 50 fs, which is LCLS-like performance. The overall length of the accelerator plus undulator is around 250 meters which is much shorter than the LCLS length of 1230 meters. That makes it possible to build hard X-ray FEL in a laboratory with limited size.« less

A large-scale full-length cDNA analysis to explore the budding yeast transcriptome

PubMed Central

Miura, Fumihito; Kawaguchi, Noriko; Sese, Jun; Toyoda, Atsushi; Hattori, Masahira; Morishita, Shinichi; Ito, Takashi

2006-01-01

We performed a large-scale cDNA analysis to explore the transcriptome of the budding yeast Saccharomyces cerevisiae. We sequenced two cDNA libraries, one from the cells exponentially growing in a minimal medium and the other from meiotic cells. Both libraries were generated by using a vector-capping method that allows the accurate mapping of transcription start sites (TSSs). Consequently, we identified 11,575 TSSs associated with 3,638 annotated genomic features, including 3,599 ORFs, to suggest that most yeast genes have two or more TSSs. In addition, we identified 45 previously undescribed introns, including those affecting current ORF annotations and those spliced alternatively. Furthermore, the analysis revealed 667 transcription units in the intergenic regions and transcripts derived from antisense strands of 367 known features. We also found that 348 ORFs carry TSSs in their 3′-halves to generate sense transcripts starting from inside the ORFs. These results indicate that the budding yeast transcriptome is considerably more complex than previously thought, and it shares many recently revealed characteristics with the transcriptomes of mammals and other higher eukaryotes. Thus, the genome-wide active transcription that generates novel classes of transcripts appears to be an intrinsic feature of the eukaryotic cells. The budding yeast will serve as a versatile model for the studies on these aspects of transcriptome, and the full-length cDNA clones can function as an invaluable resource in such studies. PMID:17101987

A comparison of stroke rehabilitation; data from two national cohorts.

PubMed

Bērziņa, G; Vētra, A; Sunnerhagen, K S

2016-10-01

Inpatient rehabilitation is a commonly used complex intervention to improve a person's independence after stroke. Evaluation and comparison of the effects of routine clinical practice could provide a contribution towards optimization of stroke care. The aim of this study is to describe results of inpatient rehabilitation as a complex intervention for persons after stroke and explore possible differences between two countries. Data from 1055 Latvian and 1748 Swedish adult patients after stroke receiving inpatient rehabilitation, during 2011-2013, were used for this retrospective cohort study. Qualitative description of systems, as well as information on basic medical and sociodemographic information, and organizational aspects were reported. Change in the Functional Independence Measure during rehabilitation was investigated. In six domains of the instrument, the shifts for three levels of dependence were analysed using ordinal regression analysis. The components of stroke care seem to be similar in Latvia and Sweden. However, the median time since stroke onset until the start of rehabilitation was 13 weeks in Latvia and 2 weeks in Sweden. The median length of rehabilitation was 12 and 49 days, respectively. The level of dependency at start, time since stroke onset and length of the period had an impact on the results of the rehabilitation. Although components of the rehabilitation are reported as being the same, characteristics and the outcome of the inpatient rehabilitation are different. Therefore, comparison of stroke rehabilitation between countries requires caution. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Is there a correlation between right bronchus length and diameter with age?

PubMed

Otoch, José Pinhata; Minamoto, Hélio; Perini, Marcos; Carneiro, Fred Olavo; de Almeida Artifon, Everson Luiz

2013-06-01

Right main bronchial anatomy knowledge is essential to guide endoscopic stent placement in modern era. The aim is to describe right bronchial anatomy, cross-area and its relation with the right pulmonary artery and patient's age. One hundred thirty four cadaveric specimens were studied after approval by the Research and Ethics Committee at the University of São Paulo Medical School and Medical Forensic Institute of São Paulo. All necropsies were performed in natura after 24 hours of death and patients with previous pulmonary disease were excluded. Landmarks to start measurement were the first tracheal ring, vertex of carina, first right bronchial ring, and right pulmonary artery area over the right main bronchus. After mobilization, the specimens were measured using a caliper and measurement of distances was recorded in centimeters at landmarks points. All the measures (distances, cross sectional area and planes) were performed by three independent observers and recorded as mean, standard error and ranges. Student t test was used to compare means and linear regression was applied to correlate the measurements. From 134 specimens studied, 34 were excluded (10 with previous history of pulmonary diseases, surgery or deformities and 24 of female gender). Linear regression showed proportionality between tracheal length and right bronchus length; with the area at first tracheal ring and carina and also between the cross sectional area at these points. Linear regression analysis between tracheal length and age (R=0.593 P<0.005), right bronchus length and age (R=0.523, P<0.005), area of contact between right bronchus and right pulmonary artery and age (R=0.35, P<0.005). We can conclude that large airways grow progressively with increasing age in male gender. There was a direct correlation between age and tracheal length; as has age and right bronchus length. There was a direct correlation between age and the area of the right bronchus covered by the right pulmonary artery.

Evaluation of developmental toxicity of guaifenesin using pregnant female rats.

PubMed

Shabbir, Arham; Shamsi, Sadia; Shahzad, Muhammad; Butt, Hajra Ikram; Aamir, Khurram; Iqbal, Javed

2016-01-01

Guaifenesin possesses expectorant, muscle relaxant, and anticonvulsive properties. To the best of our knowledge, the promising data regarding the developmental toxicity of guaifenesin are scarce. The current study investigates the developmental toxic effects of guaifenesin in detail using female rats. Twenty-five dams were divided into five groups. Group 1 served as a control, while Group-2, -3, -4, and -5 were administered with 250, 350, 500, and 600 (mg/kg b.w.) doses of guaifenesin, respectively, starting from gestation day 6 to day 17. Half of the total recovered fetuses was subjected to morphologic and morphometric analysis, while other half was subjected to skeletal examination. A significant reduction in maternal weight, and food/water intake, was observed, however, no mortality and morbidity were observed. About 14 dead fetuses were found in Group-3 and -4 each, while 26 in Group 5. Morphological analysis revealed 21.2%, 45.4%, 67.2%, and 86.9% of total fetuses having hemorrhagic spots in Group-2, -3, -4, and -5, respectively. Dropping wrist/ankle and kinky tail were found in Group-4 and -5 only. Morphometric analysis showed a significant decline in fetal weight, full body length, skull length, forelimb length, hindlimb length, and tail length in all guaifenesin treated groups. Skeletal examination displayed that only Group 5 fetuses had increased intercostal space between 7(th) and 8(th) rib. We also observed improper development of carpals, metacarpals, tarsals, and metatarsals of the Group 5 fetuses. Guaifenesin showed a significant developmental toxicity at selected test doses; therefore, a careful use is suggested during pregnancy.

Evaluation of developmental toxicity of guaifenesin using pregnant female rats

PubMed Central

Shabbir, Arham; Shamsi, Sadia; Shahzad, Muhammad; Butt, Hajra Ikram; Aamir, Khurram; Iqbal, Javed

2016-01-01

Objectives: Guaifenesin possesses expectorant, muscle relaxant, and anticonvulsive properties. To the best of our knowledge, the promising data regarding the developmental toxicity of guaifenesin are scarce. The current study investigates the developmental toxic effects of guaifenesin in detail using female rats. Materials and Methods: Twenty-five dams were divided into five groups. Group 1 served as a control, while Group-2, -3, -4, and -5 were administered with 250, 350, 500, and 600 (mg/kg b.w.) doses of guaifenesin, respectively, starting from gestation day 6 to day 17. Half of the total recovered fetuses was subjected to morphologic and morphometric analysis, while other half was subjected to skeletal examination. Results: A significant reduction in maternal weight, and food/water intake, was observed, however, no mortality and morbidity were observed. About 14 dead fetuses were found in Group-3 and -4 each, while 26 in Group 5. Morphological analysis revealed 21.2%, 45.4%, 67.2%, and 86.9% of total fetuses having hemorrhagic spots in Group-2, -3, -4, and -5, respectively. Dropping wrist/ankle and kinky tail were found in Group-4 and -5 only. Morphometric analysis showed a significant decline in fetal weight, full body length, skull length, forelimb length, hindlimb length, and tail length in all guaifenesin treated groups. Skeletal examination displayed that only Group 5 fetuses had increased intercostal space between 7th and 8th rib. We also observed improper development of carpals, metacarpals, tarsals, and metatarsals of the Group 5 fetuses. Conclusion: Guaifenesin showed a significant developmental toxicity at selected test doses; therefore, a careful use is suggested during pregnancy. PMID:27298495

Cross-sectional study on the weight and length of infants in the interior of the state of São Paulo, Brazil: associations with sociodemographic variables and breastfeeding.

PubMed

Bernardi, Julia Laura Delbue; Jordão, Regina Esteves; Barros Filho, Antônio de Azevedo

2009-07-01

Increasing obesity is starting to occur among Brazilians. The aim of this study was to investigate the weight and length of children under two years of age in relation to sociodemographic variables and according to whether they were breastfed. Cross-sectional randomized study conducted in 2004-2005, based on the declaration of live births (SINASC) in Campinas, Brazil. 2,857 mothers of newborns were interviewed and answered a questionnaire seeking socioeconomic and breastfeeding information. The newborns' weights and lengths were measured at the end of the interviews and the body mass index was calculated. Percentiles (< 15 and > 85) and Z-scores (< -1 and > +1) were used for classification based on the new growth charts recommended by WHO (2006). The log-rank test, multiple linear regression and binomial test (Z) were used. The statistical significance level used was 5%. The predominant social level was class C. The median for exclusive breastfeeding was 90 days; 61.25% of the children were between P15 and P85 for body mass index and 61.12% for length, respectively. Children whose mothers studied for nine to eleven years and children whose mothers were unemployed presented lower weight. Children whose mothers worked in health-related professions presented lower length when correlated with breastfeeding. The breastfeeding, maternal schooling and maternal occupation levels had an influence on nutrition status and indicated that obesity is occurring in early childhood among the infants living in the municipality.

Influence of field penetration ratios and filamentation on end-effect related hysteretic loss reductions for superconducting strips

NASA Astrophysics Data System (ADS)

Dong, K.; Sumption, M.; Collings, E. W.; Majoros, M.; Yu, H.; Hu, M.

2017-12-01

There are a few key conductor-specific factors which influence the power loss of superconductors; these include critical current, geometry, and normal metal resistivity. This paper focuses on the influence of sample geometry on the power loss of superconducting strips and the effect of filamentation and sample length as a function of the field penetration state of the superconductor. We start with the analytical equations for infinite slabs and strips and then consider the influence of end effects for both unstriated and striated conductor. The loss is then calculated and compared as a function of applied field for striated and unstriated conductors. These results are much more general than they might seem at first glance, since they will be important building blocks for analytic loss calculations for twisted geometries for coated conductors, including helical (Conductor on Round Core, CORC), and twisted (e.g., twist stack cables) geometries. We show that for relatively low field penetration, end effects and reduced field penetration both reduce loss. In addition, for filamentary samples the relevant ratio of length scales becomes the filament width to sample length, thus modifying the loss ratios.

Analysis of polyglutamine-coding repeats in the TATA-binding protein in different human populations and in patients with schizophrenia an bipolar affective disorder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rubinsztein, D.C.; Leggo, J.; Crow, T.J.

A new class of disease (including Huntington disease, Kennedy disease, and spinocerebellar ataxias types 1 and 3) results from abnormal expansions of CAG trinucleotides in the coding regions of genes. In all of these diseases the CAG repeats are thought to be translated into polyglutamine tracts. There is accumulating evidence arguing for CAG trinucleotide expansions as one of the causative disease mutations in schizophrenia and bipolar affective disorder. We and others believe that the TATA-binding protein (TBP) is an important candidate to investigate in these diseases as it contains a highly polymorphic stretch of glutamine codons, which are close tomore » the threshold length where the polyglutamine tracts start to be associated with disease. Thus, we examined the lengths of this polyglutamine repeat in normal unrelated East Anglians, South African Blacks, sub-Saharan Africans mainly from Nigeria, and Asian Indians. We also examined 43 bipolar affective disorder patients and 65 schizophrenic patients. The range of polyglutamine tract-lengths that we found in humans was from 26-42 codons. No patients with bipolar affective disorder and schizophrenia had abnormal expansions at this locus. 22 refs., 1 tab.« less

Transition from global to local control of dayside reconnection from ionospheric-sourced mass loading

NASA Astrophysics Data System (ADS)

Zhang, B.; Brambles, O. J.; Cassak, P. A.; Ouellette, J. E.; Wiltberger, M.; Lotko, W.; Lyon, J. G.

2017-09-01

We have conducted a series of controlled numerical simulations to investigate the response of dayside reconnection to idealized, ionosphere-sourced mass loading processes to determine whether they affect the integrated dayside reconnection rate. Our simulation results show that the coupled solar wind-magnetosphere system may exhibit both local and global control behaviors depending on the amount of mass loading. With a small amount of mass loading, the changes in local reconnection rate affects magnetosheath properties only weakly and the geoeffective length in the upstream solar wind is essentially unchanged, resulting in the same integrated dayside reconnection rate. With a large amount of mass loading, however, the magnetosheath properties and the geoeffective length are significantly affected by slowing down the local reconnection rate, resulting in an increase of the magnetic pressure in the magnetosheath, with a significant reduction in the geoeffective length in the upstream solar wind and in the integrated dayside reconnection rate. In this controlled simulation setup, the behavior of dayside reconnection potential is determined by the role of the enhanced magnetic pressure in the magnetospheath due to magnetospheric mass loading. The reconnection potential starts to decrease significantly when the enhanced magnetic pressure alters the thickness of the magnetosheath.

On effects of topography in rotating flows

NASA Astrophysics Data System (ADS)

Burmann, Fabian; Noir, Jerome; Jackson, Andrew

2017-11-01

Both, seismological studies and geodynamic arguments suggest that there is significant topography at the core mantle boundary (CMB). This leads to the question whether the topography of the CMB could influence the flow in the Earth's outer core. As a preliminary experiment, we investigate the effects of bottom topography in the so-called Spin-Up, where motion of a contained fluid is created by a sudden increase of rotation rate. Experiments are performed in a cylindrical container mounted on a rotating table and quantitative results are obtained with particle image velocimetry. Several horizontal length scales of topography (λ) are investigated, ranging from cases where λ is much smaller then the lateral extend of the experiment (R) to cases where λ is a fraction of R. We find that there is an optimal λ that creates maximum dissipation of kinetic energy. Depending on the length scale of the topography, kinetic energy is either dissipated in the boundary layer or in the bulk of the fluid. Two different phases of fluid motion are present: a starting flow in the from of solid rotation (phase I), which is later replaced by meso scale vortices on the length scale of bottom topography (phase II).

Thermal degradation of TiO2 nanotubes on titanium

NASA Astrophysics Data System (ADS)

Shivaram, Anish; Bose, Susmita; Bandyopadhyay, Amit

2014-10-01

The objective of this research was to study thermal degradation behavior of TiO2 nanotubes on titanium (Ti). TiO2 nanotubes were grown via anodization method on commercially pure Ti (Cp-Ti) discs using two different electrolytes, 1 vol. % HF in deionized (DI) water and 1 vol. % HF + 0.5 wt. % NH4F + 10 vol. % DI water in ethylene glycol, to obtain nanotubes with two different lengths, 300 nm and 950 nm keeping the nanotube diameter constant at 100 ± 20 nm. As grown TiO2 nanotubes were subjected to heat treatment to understand thermal degradation as a function of both temperature and hold time. The signs of degradation were observed mainly when amorphous nanotubes started to crystallize, however the crystallization temperature varied based on TiO2 nanotubes length and anodizing condition. Overall, 300 nm nanotubes were thermally stable at least up to 400 °C for 12 h, while the 950 nm long nanotubes show signs of degradation from 400 °C for 6 h only. Clearly, length of nanotubes, heat treatment temperature as well as hold times show influence toward degradation kinetics of TiO2 nanotubes on titanium.

Effects of conventional anchorage on premolar root development during treatment with a pendulum appliance.

PubMed

Kinzinger, Gero; Pantel, Cora; Ludwig, Björn; Gülden, Norbert; Glasl, Bettina; Lisson, Jörg

2010-07-01

By metrically analyzing orthopantomograms, we aimed in this study to retrospectively investigate whether maxillary premolars used as anchoring teeth during molar distalization with pendulum appliances would reveal inhibited root development. The upper molars were distalized with a modified pendulum appliance (Pendulum K) in 36 adolescents (14 males, 22 females, mean age 12.3 years). Mean treatment period was 19.5 weeks. Orthopantomograms of each patient were taken at the start (time point T1) and after completion of molar distalization (time point T2). The enlargement of the posterior region was ascertained individually quadrant by quadrant for each radiograph, followed by measurement of the vestibular tooth lengths of the premolars whose root development was for the most part not yet complete. To assess further root development in the premolar region, the differences were calculated between tooth lengths at the start and end of treatment. During treatment with the pendulum appliance a general increase in tooth lengths in the anchorage region was observed (1.37 +/- 1.70 mm, p<0.0001). Differentiated by dental age, we noted increases in tooth lengths of patients with second molars in the budding stage (patient group PG 1: 0.93 +/- 1.37 mm, p<0.0001) as well as of patients with fully-erupted second molars (patient group PG 2: 1.81 +/- 1.88 mm, p<0.0001). Both groups demonstrated greater increases in the second premolars than the first premolars; the increases group-wise were larger in PG 2 than PG 1. However, both the group comparison (PG 1 versus PG 2) and the side comparison (right versus left) (differentiated into first and second molars) showed no statistically relevant differences. Visual assessment of the radiographs revealed no evidence of treatment-related root deviations. A highly complex system of forces acts on the anchoring teeth during molar distalization with the conventionally-anchored Pendulum K. However, the Pendulum K appliance's specific biomechanics make it possible to transfer the reactive forces and moments to the anchorage unit so that they remain within the physiological range, allowing uninhibited premolar root development. This also applies after completed eruption of the second molars, when the treatment period and hence duration of exposure to the active and reactive forces and moments arising during molar distalization are comparatively increased.

Neurotization of the phrenic nerve with accessory nerve for high cervical spinal cord injury with respiratory distress: an anatomic study.

PubMed

Wang, Ce; Zhang, Ying; Nicholas, Tsai; Wu, Guoxin; Shi, Sheng; Bo, Yin; Wang, Xinwei; Zhou, Xuhui; Yuan, Wen

2014-01-01

High cervical spinal cord injury is associated with high morbidity and mortality. Traditional treatments carry various complications such as infection, pacemaker failure and undesirable movement. Thus, a secure surgical strategy with fewer complications analogous to physiological ventilation is still required. We hope to offer one potential method to decrease the complications and improve survival qualities of patients from the aspect of anatomy. The purpose of the study is to provide anatomic details on the accessory nerve and phrenic nerve for neurotization in patients with high spinal cord injuries. 38 cadavers (76 accessory and 76 phrenic nerves) were dissected in the study. The width, length and thickness of each accessory nerve and phrenic nerve above clavicle were measured. The distances from several landmarks on accessory nerve to the origin and the end of the phrenic nerve above clavicle were measured too. Then, the number of motor nerve fibers on different sections of the nerves was calculated using the technique of immunohistochemistry. The accessory nerves distal to its sternocleidomastoid muscular branches were 1.52 ± 0.32 mm ~1.54 ± 0.29 mm in width, 0.52 ± 0.18 mm ~ 0.56 ± 0.20mm in thickness and 9.52 ± 0.98 cm in length. And the phrenic nerves above clavicle were 1.44 ± 0.23 mm ~ 1.45 ± 0.24 mm in width, 0.47 ± 0.15 mm ~ 0.56 ± 0.25 mm in thickness and 6.48 ± 0.78 cm in length. The distance between the starting point of accessory nerve and phrenic nerve were 3.24 ± 1.17 cm, and the distance between the starting point of accessory nerve and the end of the phrenic nerve above clavicle were 8.72 ± 0.84 cm. The numbers of motor nerve fibers in accessory nerve were 1,038 ± 320~1,102 ± 216, before giving out the sternocleidomastoid muscular branches. The number of motor nerve fibers in the phrenic nerve was 911 ± 321~1,338 ± 467. The accessory nerve and the phrenic were similar in width, thickness and the number of motor nerve fibers. And the lengths of accessory nerve were long enough for neuritisation with phrenic nerve.

Optimization for Single-Spike X-Ray FELs at LCLS with a Low Charge Beam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, L.; Ding, Y.; Huang, Z.

2011-12-14

The Linac Coherent Light Source is an x-ray free-electron laser at the SLAC National Accelerator Laboratory, which is operating at x-ray wavelengths of 20-1.2 Angstrom with peak brightness nearly ten orders of magnitude beyond conventional synchrotron radiation sources. At the low charge operation mode (20 pC), the x-ray pulse length can be <10 fs. In this paper we report our numerical optimization and simulations to produce even shorter x-ray pulses by optimizing the machine and undulator setup at 20 pC charge. In the soft x-ray regime, with combination of slotted-foil or undulator taper, a single spike x-ray pulse is achievablemore » with peak FEL power of a few 10s GW. Linac Coherent Light Source (LCLS), the world's first hard x-ray Free electron laser (FEL), has started operation since 2009. With nominal operation charge of 250 pC, the generated x-ray pulse length is from 70 fs to a few hundred fs. This marks the beginning of a new era of ultrashort x-ray sciences. In addition, a low charge (20pC) operation mode has also been established. Since the collective effects are reduced at the low charge mode, we can increase the compression factor and still achieve a few kA peak current. The expected electron beam and x-ray pulses are less than 10 fs. There are growing interests in even shorter x-ray pulses, such as fs to sub-fs regime. One of the simple solutions is going to even lower charge. As discussed, single-spike x-ray pulses can be generated using 1 pC charge. However, this charge level is out of the present LCLS diagnostic range. 20 pC is a reasonable operation charge at LCLS, based on the present diagnostic system. At 20 pC in the soft x-ray wavelength regime, we have experimentally demonstrated that FEL can work at undercompression or over-compression mode, such as 1 degree off the full-compression; at full-compression, however, there is almost no lasing. In hard x-ray wavelength regime, we observed that there are reasonable photons generated even at full-compression mode, although the photon number is less than that from under-compression or over-compression mode. Since we cannot measure the x-ray pulse length at this time scale, the machine is typically optimized for generating maximum photons, not minimum pulse length. In this paper, we study the methods of producing femtosecond (or single-spike) x-ray pulses at LCLS with 20 pC charge, based on start-to-end simulations. Figure 1 shows a layout of LCLS. The compression in the second bunch compressor (BC2) determines the final e-beam bunch length. However, the laser heater, dog-leg after the main linac (DL2) and collective effects also affect the final bunch length. To adjust BC2 compression, we can either change the L2 phase or BC2 R{sub 56}. In this paper we only tune L2 phase while keep BC2 R{sub 56} fixed. For the start-to-end simulations, we used IMPACT-T and ELEGANT tracking from the photocathode to the entrance of the undulator, after that the FEL radiation was simulated with GENESIS. IMPACT-T tracks about 10{sup 6} particles in the injector part until 135 MeV, including 3D space charge force. The output particles from IMPACT-T are smoothed and increased to 12 x 10{sup 6} to reduce high-frequency numerical noise for subsequent ELEGANT simulations, which include linear and nonlinear transport effects, a 1D transient model of CSR, and longitudinal space charge effects, as well as geometric and resistive wake fields in the accelerator. In GENESIS part, the longitudinal wake field from undulator chamber and longitudinal space field are also included.« less

Does Variation in Either Age at Start of Therapy or Duration of Therapy Make Chemoprevention with Finasteride Cost-Effective?

PubMed Central

Stewart, Suzanne Biehn; Scales, Charles D.; Moul, Judd W.; Reed, Shelby D.

2013-01-01

Background Incremental cost-effectiveness ratios (ICER) of finasteride for prostate cancer prevention are consistent with estimates beyond $100,000 per quality-adjusted life-year (QALY). The majority of these analyses are based on chemoprevention starting in men aged 50–55yrs. We sought to evaluate the impact of varying both age at commencement of therapy and length of therapy on the cost-effectiveness of finasteride. Methods A probabilistic Markov model was designed to estimate lifetime prostate health related costs and quality-adjusted survival for men receiving or not receiving chemoprevention with finasteride. ICERs across scenarios varying age at start of therapy and duration of chemoprevention were compared. Results The ICER for men starting chemoprevention at age 50 and continuing to age 75 was $88,800 per QALY when assuming finasteride causes a constant risk reduction across all tumor grades (base case 1) and $142,300 per when assuming a differential treatment effect according to Gleason score (base case 2). When starting age is increased, the ICERs trend downward and nadir at 65 years to $64,700 per QALY (base case 1) and $118,600 per QALY (base case 2). Altering duration of therapy had minimal impact. Patient-level experiences with finasteride and BPH significantly influenced the cost-effectiveness of chemoprevention. Conclusion Initiating chemoprevention at ages when prostate cancer incidence is higher improves its cost-effectiveness profile. Only when assuming a constant risk reduction for all tumor grades, did finasteride fall below $100,000 per QALY, but this finding was not upheld when accounting for side effects associated with the drug. PMID:22777393

Orbit Transfer Vehicle Engine Study. Phase A, extension 1: Advanced expander cycle engine optimization

NASA Technical Reports Server (NTRS)

Mellish, J. A.

1979-01-01

The performance optimization of expander cycle engines at vacuum thrust levels of 10K, 15K, and 20K lb is discussed. The optimization is conducted for a maximum engine length with an extendible nozzle in the retracted position of 60 inches and an engine mixture ratio of 6.0:1. The thrust chamber geometry and cycle analyses are documented. In addition, the sensitivity of a recommended baseline expander cycle to component performance variations is determined and chilldown/start propellant consumptions are estimated.

Inhibitors for Androgen Receptor Activation Surfaces

DTIC Science & Technology

2008-09-01

such as FKBP52 or HSP90 bind in vivo, and started a collaboration with Marc Cox at UT El Paso to test these possibilities. Our assays of mutated amino...will complete testing the compounds in full length AR constructs and publish the results. We have begun two collaborations, one with Marc Cox on...Prof. Marc Cox and Dr. Paul Rennie to identify proteins that bind to BF3 so that we may form crystals of the receptor with these proteins and learn more about function of the human androgen receptor.

The Effect of N-Length on the Development of Cooperative and Non-Cooperative Behavior in a Two-Person Game. Part of the Final Report on Head Start Evaluation and Research: 1968-69 to the Office of Economic Opportunity.

ERIC Educational Resources Information Center

Manning, Brad A.; Pierce-Jones, John

In this study of cooperative behavior and its antecedents, the main experimental tool was a two-person, two-choice game. The subjects, 80 Negro males ranging in age from 4 1/2 to 6 years, could choose either to cooperate by giving a piece of candy or not to cooperate by refusing to give a piece of candy to the other child during an acquisition…

Steady viscous flow past a circular cylinder

NASA Technical Reports Server (NTRS)

Fornberg, B.

1984-01-01

Viscous flow past a circular cylinder becomes unstable around Reynolds number Re = 40. With a numerical technique based on Newton's method and made possible by the use of a supercomputer, steady (but unstable) solutions have been calculated up to Re = 400. It is found that the wake continues to grow in length approximately linearly with Re. However, in conflict with available asymptotic predictions, the width starts to increase very rapidly around Re = 300. All numerical calculations have been performed on the CDC CYBER 205 at the CDC Service Center in Arden Hills, Minnesota.

Modeling and characterization of shielded low loss CPWs on 65 nm node silicon

NASA Astrophysics Data System (ADS)

Hongrui, Wang; Dongxu, Yang; Li, Zhang; Lei, Zhang; Zhiping, Yu

2011-06-01

Coplanar waveguides (CPWs) are promising candidates for high quality passive devices in millimeter-wave frequency bands. In this paper, CPW transmission lines with and without ground shields have been designed and fabricated on 65 nm CMOS technology. A physical-based model is proposed to describe the frequency-dependent per-unit-length L, C, R and G parameters. Starting with a basic CPW structure, the slow-wave effect and ground-shield influence have been analyzed and incorporated into the general model. The accuracy of the model is confirmed by experimental results.

Bobcat attack on a cottontail rabbit

USGS Publications Warehouse

Biggins, D.E.; Biggins, D.M.

2006-01-01

We observed an attack by a bobcat (Lynx rufus) on a cottontail rabbit (Sylvilagus) that involved stealthy approach by the cat for >1 h, followed by a 12.3-s chase covering 116.0 m for the cat and 128.4 m for the rabbit. During the chase, the route of the cat from starting point to kill site was more direct than the semi-circular route of the rabbit. Stride lengths for the cat and total distance covered by the chase were longer than those previously reported for bobcats.

Transient, heat-induced thermal resistance in the small intestine of mouse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hume, S.P.; Marigold, J.C.L.

Heat-induced thermal resistance has been investigated in mouse jejunum by assaying crypt survival 24 h after treatment. Hyperthermia was achieved by immersing an exteriorized loop of intestine in a bath of Krebs-Ringer solution. Two approaches have been used. In the first, thermal survival curves were obtained following single hyperthermal treatments at temperatures in the range 42 to 44/sup 0/C. Transient thermal resistance, inducted by a plateau in the crypt survival curve, developed during heating at temperatures around 42.5/sup 0/C after 60 to 80 min. In the second series of experiments, a priming heat treatment (40.0, 41.0, 41.5, or 42.0/sup 0/Cmore » for 60 min) was followed at varying intervals by a test treatment at 43.0/sup 0/C. A transient resistance to the second treatment was induced, the extent and time of development being dependent upon the priming treatment. Crypt survival curves for thermally resistant intestine showed an increase in thermal D/sub 0/ and a decrease in n compared with curves from previously unheated intestine.« less

The effect of milk fat globules on adherence and internalization of Salmonella Enteritidis to HT-29 cells.

PubMed

Guri, A; Griffiths, M; Khursigara, C M; Corredig, M

2012-12-01

Milk fat globules were extracted from bovine and goat milk and incubated with HT-29 human adenocarcinoma cells to assess the attachment and internalization of Salmonella Enteritidis. Because the expression of bacterial adhesins is highly affected by the presence of antibiotic, the attachment was studied with and without antibiotic in the cell growth medium. Although no inhibitory effect of the fat globules was observed in the presence of the antibiotic, milk fat globules significantly inhibited the binding and internalization of Salmonella in medium free of antibiotic. The fat globules from both bovine and goat milk markedly reduced bacterial binding and invasion compared with controls, and the cells treated with goat milk-derived fat globules demonstrated greater protective properties than those derived from bovine milk. The effect of heat treatment on bovine fat globules was also investigated, and it was shown that the fat globules from heated milk had a higher degree of inhibition than those from unheated milk. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effect of catalyst type on field emission properties of nanostructured carbon films grown by a modified hot-filament chemical vapor deposition technique

NASA Astrophysics Data System (ADS)

Kang, Sukill; Lowndes, Douglas H.; Ellis, Darren

2001-03-01

Nanostructured carbon films have been grown on uncatalysed n-type Si using a modified HF-CVD process and catalytic decomposition of ethylene (C_2H_4). Various metal catalyst wires such as Ni, Co, Fe and a NiFe composite were placed within the windings of a tungsten filament and the assembly was placed in close proximity ( ~7 mm) to the unheated substrate. Radiative heating of the substrate by the filament results in a substrate temperature of ~ 500^oC after 7 min. Films grown using the Ni catalyst showed a field emission turn-on field that varied from 9 to 15 V/μm and was stable for 30-50 hours (1-10 A/cm^2 emission current density), a result that is comparable to carbon nanotube- and carbon nanofiber-based structures. In this contribution, we present results from field emission scanning electron microscopy, transmission electron microscopy, and electron field emission measurements that elucidate the relationship between field emission properties, film morphology, and type of catalyst.

Sustained drag reduction in a turbulent flow using a low-temperature Leidenfrost surface

PubMed Central

Saranadhi, Dhananjai; Chen, Dayong; Kleingartner, Justin A.; Srinivasan, Siddarth; Cohen, Robert E.; McKinley, Gareth H.

2016-01-01

Skin friction drag contributes a major portion of the total drag for small and large water vehicles at high Reynolds number (Re). One emerging approach to reducing drag is to use superhydrophobic surfaces to promote slip boundary conditions. However, the air layer or “plastron” trapped on submerged superhydrophobic surfaces often diminishes quickly under hydrostatic pressure and/or turbulent pressure fluctuations. We use active heating on a superhydrophobic surface to establish a stable vapor layer or “Leidenfrost” state at a relatively low superheat temperature. The continuous film of water vapor lubricates the interface, and the resulting slip boundary condition leads to skin friction drag reduction on the inner rotor of a custom Taylor-Couette apparatus. We find that skin friction can be reduced by 80 to 90% relative to an unheated superhydrophobic surface for Re in the range 26,100 ≤ Re ≤ 52,000. We derive a boundary layer and slip theory to describe the hydrodynamics in the system and show that the plastron thickness is h = 44 ± 11 μm, in agreement with expectations for a Leidenfrost surface. PMID:27757417

Jet-Surface Interaction Test: Flow Measurements Results

NASA Technical Reports Server (NTRS)

Brown, Cliff; Wernet, Mark

2014-01-01

Modern aircraft design often puts the engine exhaust in close proximity to the airframe surfaces. Aircraft noise prediction tools must continue to develop in order to meet the challenges these aircraft present. The Jet-Surface Interaction Tests have been conducted to provide a comprehensive quality set of experimental data suitable for development and validation of these exhaust noise prediction methods. Flow measurements have been acquired using streamwise and cross-stream particle image velocimetry (PIV) and fluctuating surface pressure data acquired using flush mounted pressure transducers near the surface trailing edge. These data combined with previously reported far-field and phased array noise measurements represent the first step toward the experimental data base. These flow data are particularly applicable to development of noise prediction methods which rely on computational fluid dynamics to uncover the flow physics. A representative sample of the large flow data set acquired is presented here to show how a surface near a jet affects the turbulent kinetic energy in the plume, the spatial relationship between the jet plume and surface needed to generate surface trailing-edge noise, and differences between heated and unheated jet flows with respect to surfaces.

Simulation Approach for Microscale Noncontinuum Gas-Phase Heat Transfer

NASA Astrophysics Data System (ADS)

Torczynski, J. R.; Gallis, M. A.

2008-11-01

In microscale thermal actuators, gas-phase heat transfer from the heated beams to the adjacent unheated substrate is often the main energy-loss mechanism. Since the beam-substrate gap is comparable to the molecular mean free path, noncontinuum gas effects are important. A simulation approach is presented in which gas-phase heat transfer is described by Fourier's law in the bulk gas and by a wall boundary condition that equates the normal heat flux to the product of the gas-solid temperature difference and a heat transfer coefficient. The dimensionless parameters in this heat transfer coefficient are determined by comparison to Direct Simulation Monte Carlo (DSMC) results for heat transfer from beams of rectangular cross section to the substrate at free-molecular to near-continuum gas pressures. This simulation approach produces reasonably accurate gas-phase heat-transfer results for wide ranges of beam geometries and gas pressures. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Selected Papers on Protoplanetary Disks

NASA Technical Reports Server (NTRS)

Bell, K. R.; Cassen, P. M.; Wasson, J. T.; Woolum, D. S.; Klahr, H. H.; Henning, Th.

2004-01-01

Three papers present studies of thermal balances, dynamics, and electromagnetic spectra of protoplanetary disks, which comprise gas and dust orbiting young stars. One paper addresses the reprocessing, in a disk, of photons that originate in the disk itself in addition to photons that originate in the stellar object at the center. The shape of the disk is found to strongly affect the redistribution of energy. Another of the three papers reviews an increase in the optical luminosity of the young star FU Orionis. The increase began in the year 1936 and similar increases have since been observed in other stars. The paper summarizes astronomical, meteoric, and theoretical evidence that these increases are caused by increases in mass fluxes through the inner portions of the protoplanetary disks of these stars. The remaining paper presents a mathematical-modeling study of the structures of protostellar accretion disks, with emphasis on limits on disk flaring. Among the conclusions reached in the study are that (1) the radius at which a disk becomes shadowed from its central stellar object depends on radial mass flow and (2) most planet formation has occurred in environments unheated by stellar radiation.

Influence of dissolved gases and heat treatments on the oxidative degradation of polyunsaturated fatty acids enriched dairy beverage.

PubMed

Giroux, Hélène J; Acteau, Geneviève; Sabik, Hassan; Britten, Michel

2008-07-23

The combined effect of dissolved gas composition and heat treatment on the oxidative degradation of a dairy beverage enriched with 2% linseed oil was studied. The dairy beverage was saturated with air, nitrogen, or a nitrogen/hydrogen mixture (4% hydrogen) before pasteurization or sterilization. Saturation with either nitrogen or a nitrogen/hydrogen mixture decreased the dissolved oxygen concentration in dairy beverages (Delta = 7.7 ppm), and the presence of hydrogen significantly reduced the redox potential (Delta = 287 mV). Heat treatments also reduced the oxygen content and redox potential, sterilization being more effective than pasteurization. Both pasteurization and sterilization induced the oxidative degradation of the beverages. On average, the propanal concentration increased by a factor of 2.3 after pasteurization and by a factor of 6.2 after sterilization. However, during storage, sterilized beverages resisted light-induced oxidation better than unheated or pasteurized beverages. Furthermore, saturation with nitrogen or a nitrogen/hydrogen mixture significantly reduced oxidative degradation and provided some protection against color changes during storage.

Progress Toward Improving Jet Noise Predictions in Hot Jets

NASA Technical Reports Server (NTRS)

Khavaran, Abbas; Kenzakowski, Donald C.

2007-01-01

An acoustic analogy methodology for improving noise predictions in hot round jets is presented. Past approaches have often neglected the impact of temperature fluctuations on the predicted sound spectral density, which could be significant for heated jets, and this has yielded noticeable acoustic under-predictions in such cases. The governing acoustic equations adopted here are a set of linearized, inhomogeneous Euler equations. These equations are combined into a single third order linear wave operator when the base flow is considered as a locally parallel mean flow. The remaining second-order fluctuations are regarded as the equivalent sources of sound and are modeled. It is shown that the hot jet effect may be introduced primarily through a fluctuating velocity/enthalpy term. Modeling this additional source requires specialized inputs from a RANS-based flowfield simulation. The information is supplied using an extension to a baseline two equation turbulence model that predicts total enthalpy variance in addition to the standard parameters. Preliminary application of this model to a series of unheated and heated subsonic jets shows significant improvement in the acoustic predictions at the 90 degree observer angle.

Persistence of organic carbon in heated aerosol residuals measured during Tropical Composition Cloud and Climate Coupling (TC4)

NASA Astrophysics Data System (ADS)

Thornberry, T.; Froyd, K. D.; Murphy, D. M.; Thomson, D. S.; Anderson, B. E.; Thornhill, K. L.; Winstead, E. L.

2010-05-01

The Particle Analysis by Laser Mass Spectrometry (PALMS) single particle mass spectrometer was used to analyze the composition of the nonvolatile fraction of atmospheric aerosol in a number of different environments. The mass spectra of individual particles sampled through an inlet section heated to 300°C were compared to unheated particles during flights of the NASA DC-8 aircraft during the Tropical Composition Cloud and Climate Coupling (TC4) mission. Comparisons are presented of measurements made in the marine boundary layer, the free troposphere, and the continental boundary layer over the Colombian jungle. The heated section completely removed sulfate from the aerosols except for sodium sulfate and related compounds in sea salt particles. Organic material in sea salt particles was observed to be less volatile than chlorine. Biomass burning particles were more likely to survive heating than other mixed sulfate-organic particles. For all particle types, there was a significant contribution to the residues from carbonaceous material other than elemental carbon. These results demonstrate the remaining compositional complexity of aerosol residuals that survive heating in a thermal denuder.

Electronic Components and Systems for Cryogenic Space Applications

NASA Technical Reports Server (NTRS)

Patterson, R. L.; Hammoud, A.; Dickman, J. E.; Gerber, S.; Elbuluk, M. E.; Overton, E.

2001-01-01

Electronic components and systems capable of operation at cryogenic temperatures are anticipated in many future NASA space missions such as deep space probes and planetary surface exploration. For example, an unheated interplanetary probe launched to explore the rings of Saturn would reach an average temperature near Saturn of about - 183 C. In addition to surviving the deep space harsh environment, electronics capable of low temperature operation would contribute to improving circuit performance, increasing system efficiency, and reducing payload development and launch costs. Terrestrial applications where components and systems must operate in low temperature environments include cryogenic instrumentation, superconducting magnetic energy storage, magnetic levitation transportation system, and arctic exploration. An on-going research and development program at the NASA Glenn Research Center focuses on the development of reliable electronic devices and efficient power systems capable of surviving in low temperature environments. An overview of the program will be presented in this paper. A description of the low temperature test facilities along with selected data obtained from in-house component testing will also be discussed. Ongoing research activities that are being performed in collaboration with various organizations will also be presented.

Psychrophilic anaerobic digestion of guinea pig manure in low-cost tubular digesters at high altitude.

PubMed

Garfí, Marianna; Ferrer-Martí, Laia; Villegas, Vidal; Ferrer, Ivet

2011-05-01

Guinea pig is one of the most common livestock in rural communities of the Andes. The aim of this research was to study the anaerobic digestion of guinea pig manure in low-cost unheated tubular digesters at high altitude. To this end, the performance of two pilot digesters was monitored during 7 months; and two greenhouse designs were compared. In the dome roof digester the temperature and biogas production were significantly higher than in the shed roof digester. However, the biogas production rate was low (0.04 m(biogas)(3)m(digester)(-3) d(-1)), which is attributed to the low organic loading rate (0.6 kg(VS)m(digester)(-3)d(-1)) and temperature (23°C) of the system, among other factors. In a preliminary fertilization study, the potato yield per hectare was increased by 100% using the effluent as biofertilizer. Improving manure management techniques, increasing the organic loading rate and co digesting other substrates may be considered to enhance the process. Copyright © 2011 Elsevier Ltd. All rights reserved.

Role of degradation products of chlorogenic acid in the antioxidant activity of roasted coffee.

PubMed

Kamiyama, Masumi; Moon, Joon-Kwan; Jang, Hae Won; Shibamoto, Takayuki

2015-02-25

Antioxidant activities of brewed coffees prepared from six commercial brands ranged from 63.13 ± 1.01 to 96.80 ± 1.68% at the highest levels tested. Generally, the degree of antioxidant activity of the brewed coffee was inversely proportional to the total chlorogenic acid concentration. A sample obtained from the major chlorogenic acid, 5-caffeoylquinic acid (5-CQA), heated at 250 °C exhibited potent antioxidant activity (79.12 ± 2.49%) at the level of 10 μg/mL, whereas unheated 5-CQA showed only moderate antioxidant activity (44.41 ± 0.27%) at the level of 100 μg/mL. Heat produced relatively high levels of pyrocatechol (2,809.3 μg/g) and 2-methoxy-4-vinylphenol (46.4 μg/g) from 5-CQA, and their antioxidant activity levels were 76.57 ± 3.00 and 98.63 ± 0.01%, respectively. The results of the present study suggest that roasting degrades chlorogenic acids to form potent antioxidants and thus plays an important role in the preparation of high-antioxidant low-acid coffee.

Specific Immunoassays for Placental Alkaline Phosphatase As a Tumor Marker

PubMed Central

Stinghen, Sérvio T.; Moura, Juliana F.; Zancanella, Patrícia; Rodrigues, Giovanna A.; Pianovski, Mara A.; Lalli, Enzo; Arnold, Dodie L.; Minozzo, João C.; Callefe, Luis G.; Ribeiro, Raul C.; Figueiredo, Bonald C.

2006-01-01

Human placental (hPLAP) and germ cell (PLAP-like) alkaline phosphatases are polymorphic and heat-stable enzymes. This study was designed to develop specific immunoassays for quantifying hPLAP and PLAP-like enzyme activity (EA) in sera of cancer patients, pregnant women, or smokers. Polyclonal sheep anti-hPLAP antibodies were purified by affinity chromatography with whole hPLAP protein (ICA-PLAP assay) or a synthetic peptide (aa 57–71) of hPLAP (ICA-PEP assay); the working range was 0.1–11 U/L and cutoff value was 0.2 U/L EA for nonsmokers. The intra- and interassay coefficients of variation were 3.7%–6.5% (ICA-PLAP assay) and 9.0%–9.9% (ICA-PEP assay). An insignificant cross-reactivity was noted for high levels of unheated intestinal alkaline phosphatase in ICA-PEP assay. A positive correlation between the regression of tumor size and EA was noted in a child with embryonal carcinoma. It can be concluded that ICA-PEP assay is more specific than ICA-PLAP, which is still useful to detect other PLAP/PLAP-like phenotypes. PMID:17489017

Newborn length predicts early infant linear growth retardation and disproportionately high weight gain in a low-income population.

PubMed

Berngard, Samuel Clark; Berngard, Jennifer Bishop; Krebs, Nancy F; Garcés, Ana; Miller, Leland V; Westcott, Jamie; Wright, Linda L; Kindem, Mark; Hambidge, K Michael

2013-12-01

Stunting is prevalent by the age of 6 months in the indigenous population of the Western Highlands of Guatemala. The objective of this study was to determine the time course and predictors of linear growth failure and weight-for-age in early infancy. One hundred and forty eight term newborns had measurements of length and weight in their homes, repeated at 3 and 6 months. Maternal measurements were also obtained. Mean ± SD length-for-age Z-score (LAZ) declined from newborn -1.0 ± 1.01 to -2.20 ± 1.05 and -2.26 ± 1.01 at 3 and 6 months respectively. Stunting rates for newborn, 3 and 6 months were 47%, 53% and 56% respectively. A multiple regression model (R(2) = 0.64) demonstrated that the major predictor of LAZ at 3 months was newborn LAZ with the other predictors being newborn weight-for-age Z-score (WAZ), gender and maternal education∗maternal age interaction. Because WAZ remained essentially constant and LAZ declined during the same period, weight-for-length Z-score (WLZ) increased from -0.44 to +1.28 from birth to 3 months. The more severe the linear growth failure, the greater WAZ was in proportion to the LAZ. The primary conclusion is that impaired fetal linear growth is the major predictor of early infant linear growth failure indicating that prevention needs to start with maternal interventions. © 2013.

Numerical evaluation of gas core length in free surface vortices

NASA Astrophysics Data System (ADS)

Cristofano, L.; Nobili, M.; Caruso, G.

2014-11-01

The formation and evolution of free surface vortices represent an important topic in many hydraulic intakes, since strong whirlpools introduce swirl flow at the intake, and could cause entrainment of floating matters and gas. In particular, gas entrainment phenomena are an important safety issue for Sodium cooled Fast Reactors, because the introduction of gas bubbles within the core causes dangerous reactivity fluctuation. In this paper, a numerical evaluation of the gas core length in free surface vortices is presented, according to two different approaches. In the first one, a prediction method, developed by the Japanese researcher Sakai and his team, has been applied. This method is based on the Burgers vortex model, and it is able to estimate the gas core length of a free surface vortex starting from two parameters calculated with single-phase CFD simulations. The two parameters are the circulation and the downward velocity gradient. The other approach consists in performing a two-phase CFD simulation of a free surface vortex, in order to numerically reproduce the gas- liquid interface deformation. Mapped convergent mesh is used to reduce numerical error and a VOF (Volume Of Fluid) method was selected to track the gas-liquid interface. Two different turbulence models have been tested and analyzed. Experimental measurements of free surface vortices gas core length have been executed, using optical methods, and numerical results have been compared with experimental measurements. The computational domain and the boundary conditions of the CFD simulations were set consistently with the experimental test conditions.

Length of Barrett's segment predicts failure of eradication in radiofrequency ablation for Barrett's esophagus: a retrospective cohort study.

PubMed

Luckett, Tyler; Allamneni, Chaitanya; Cowley, Kevin; Eick, John; Gullick, Allison; Peter, Shajan

2018-05-21

We aim to investigate factors that may contribute to failure of eradication of dysplastic Barrett's Esophagus among patients undergoing radiofrequency ablation treatment. A retrospective review of patients undergoing radiofrequency ablation for treatment of Barrett's Esophagus was performed. Data analyzed included patient demographics, medical history, length of Barrett's Esophagus, number of radiofrequency ablation sessions, and histopathology. Subsets of patients achieving complete eradication were compared with those not achieving complete eradication. A total of 107 patients underwent radiofrequency ablation for Barrett's Esophagus, the majority white, overweight, and male. Before treatment, 63 patients had low-grade dysplasia, and 44 patients had high-grade dysplasia or carcinoma. Complete eradication was achieved in a majority of patients (57% for metaplasia, and 76.6% for dysplasia). Failure of eradication occurred in 15.7% of patients. The median number of radiofrequency ablation treatments in patients achieving complete eradication was 3 sessions, compared to 4 sessions for failure of eradication (p = 0.06). Barrett's esophagus length of more than 5 cm was predictive of failure of eradication (p < 0.001). Radiofrequency ablation for dysplastic Barrett's Esophagus is a proven and effective treatment modality, associated with a high rate of complete eradication. Our rates of eradication from a center starting an ablation program are comparable to previously published studies. Length of Barrett's segment > 5 cm was found to be predictive of failure of eradication in patients undergoing radiofrequency ablation.

Topological diversity of chromatin fibers: Interplay between nucleosome repeat length, DNA linking number and the level of transcription

PubMed Central

Norouzi, Davood; Katebi, Ataur; Cui, Feng; Zhurkin, Victor B.

2016-01-01

The spatial organization of nucleosomes in 30-nm fibers remains unknown in detail. To tackle this problem, we analyzed all stereochemically possible configurations of two-start chromatin fibers with DNA linkers L = 10–70 bp (nucleosome repeat length NRL = 157–217 bp). In our model, the energy of a fiber is a sum of the elastic energy of the linker DNA, steric repulsion, electrostatics, and the H4 tail-acidic patch interaction between two stacked nucleosomes. We found two families of energetically feasible conformations of the fibers—one observed earlier, and the other novel. The fibers from the two families are characterized by different DNA linking numbers—that is, they are topologically different. Remarkably, the optimal geometry of a fiber and its topology depend on the linker length: the fibers with linkers L = 10n and 10n + 5 bp have DNA linking numbers per nucleosome ΔLk ≈ −1.5 and −1.0, respectively. In other words, the level of DNA supercoiling is directly related to the length of the inter-nucleosome linker in the chromatin fiber (and therefore, to NRL). We hypothesize that this topological polymorphism of chromatin fibers may play a role in the process of transcription, which is known to generate different levels of DNA supercoiling upstream and downstream from RNA polymerase. A genome-wide analysis of the NRL distribution in active and silent yeast genes yielded results consistent with this assumption. PMID:28133628

TypeLoader: A fast and efficient automated workflow for the annotation and submission of novel full-length HLA alleles.

PubMed

Surendranath, V; Albrecht, V; Hayhurst, J D; Schöne, B; Robinson, J; Marsh, S G E; Schmidt, A H; Lange, V

2017-07-01

Recent years have seen a rapid increase in the discovery of novel allelic variants of the human leukocyte antigen (HLA) genes. Commonly, only the exons encoding the peptide binding domains of novel HLA alleles are submitted. As a result, the IPD-IMGT/HLA Database lacks sequence information outside those regions for the majority of known alleles. This has implications for the application of the new sequencing technologies, which deliver sequence data often covering the complete gene. As these technologies simplify the characterization of the complete gene regions, it is desirable for novel alleles to be submitted as full-length sequences to the database. However, the manual annotation of full-length alleles and the generation of specific formats required by the sequence repositories is prone to error and time consuming. We have developed TypeLoader to address both these facets. With only the full-length sequence as a starting point, Typeloader performs automatic sequence annotation and subsequently handles all steps involved in preparing the specific formats for submission with very little manual intervention. TypeLoader is routinely used at the DKMS Life Science Lab and has aided in the successful submission of more than 900 novel HLA alleles as full-length sequences to the European Nucleotide Archive repository and the IPD-IMGT/HLA Database with a 95% reduction in the time spent on annotation and submission when compared with handling these processes manually. TypeLoader is implemented as a web application and can be easily installed and used on a standalone Linux desktop system or within a Linux client/server architecture. TypeLoader is downloadable from http://www.github.com/DKMS-LSL/typeloader. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Massive Collection of Full-Length Complementary DNA Clones and Microarray Analyses:. Keys to Rice Transcriptome Analysis

NASA Astrophysics Data System (ADS)

Kikuchi, Shoshi

2009-02-01

Completion of the high-precision genome sequence analysis of rice led to the collection of about 35,000 full-length cDNA clones and the determination of their complete sequences. Mapping of these full-length cDNA sequences has given us information on (1) the number of genes expressed in the rice genome; (2) the start and end positions and exon-intron structures of rice genes; (3) alternative transcripts; (4) possible encoded proteins; (5) non-protein-coding (np) RNAs; (6) the density of gene localization on the chromosome; (7) setting the parameters of gene prediction programs; and (8) the construction of a microarray system that monitors global gene expression. Manual curation for rice gene annotation by using mapping information on full-length cDNA and EST assemblies has revealed about 32,000 expressed genes in the rice genome. Analysis of major gene families, such as those encoding membrane transport proteins (pumps, ion channels, and secondary transporters), along with the evolution from bacteria to higher animals and plants, reveals how gene numbers have increased through adaptation to circumstances. Family-based gene annotation also gives us a new way of comparing organisms. Massive amounts of data on gene expression under many kinds of physiological conditions are being accumulated in rice oligoarrays (22K and 44K) based on full-length cDNA sequences. Cluster analyses of genes that have the same promoter cis-elements, that have similar expression profiles, or that encode enzymes in the same metabolic pathways or signal transduction cascades give us clues to understanding the networks of gene expression in rice. As a tool for that purpose, we recently developed "RiCES", a tool for searching for cis-elements in the promoter regions of clustered genes.

The dynamics of oceanic fronts. Part 1: The Gulf Stream

NASA Technical Reports Server (NTRS)

Kao, T. W.

1970-01-01

The establishment and maintenance of the mean hydrographic properties of large scale density fronts in the upper ocean is considered. The dynamics is studied by posing an initial value problem starting with a near surface discharge of buoyant water with a prescribed density deficit into an ambient stationary fluid of uniform density. The full time dependent diffusion and Navier-Stokes equations for a constant Coriolis parameter are used in this study. Scaling analysis reveals three independent length scales of the problem, namely a radius of deformation or inertial length scale, Lo, a buoyance length scale, ho, and a diffusive length scale, hv. Two basic dimensionless parameters are then formed from these length scales, the thermal (or more precisely, the densimetric) Rossby number, Ro = Lo/ho and the Ekman number, E = hv/ho. The governing equations are then suitably scaled and the resulting normalized equations are shown to depend on E alone for problems of oceanic interest. Under this scaling, the solutions are similar for all Ro. It is also shown that 1/Ro is a measure of the frontal slope. The governing equations are solved numerically and the scaling analysis is confirmed. The solution indicates that an equilibrium state is established. The front can then be rendered stationary by a barotropic current from a larger scale along-front pressure gradient. In that quasisteady state, and for small values of E, the main thermocline and the inclined isopycnics forming the front have evolved, together with the along-front jet. Conservation of potential vorticity is also obtained in the light water pool. The surface jet exhibits anticyclonic shear in the light water pool and cyclonic shear across the front.

The cross-bridge dynamics is determined by two length-independent kinetics: Implications on muscle economy and Frank-Starling Law.

PubMed

Amiad Pavlov, Daria; Landesberg, Amir

2016-01-01

The cellular mechanisms underlying the Frank-Starling Law of the heart and the skeletal muscle force-length relationship are not clear. This study tested the effects of sarcomere length (SL) on the average force per cross-bridge and on the rate of cross-bridge cycling in intact rat cardiac trabeculae (n=9). SL was measured by laser diffraction and controlled with a fast servomotor to produce varying initial SLs. Tetanic contractions were induced by addition of cyclopiazonic acid, to maintain a constant activation. Stress decline and redevelopment in response to identical ramp shortenings, starting at various initial SLs, was analyzed. Both stress decline and redevelopment responses revealed two distinct kinetics: a fast and a slower phase. The duration of the rapid phases (4.2 ± 0.1 msec) was SL-independent. The second slower phase depicted a linear dependence of the rate of stress change on the instantaneous stress level. Identical slopes (70.5 ± 1.6 [1/s], p=0.33) were obtained during ramp shortening at all initial SLs, indicating that the force per cross-bridge and cross-bridge cycling kinetics are length-independent. A decrease in the slope at longer SLs was obtained during stress redevelopment, due to internal shortening. The first phase is attributed to rapid changes in the average force per cross-bridge. The second phase is ascribed to both cross-bridge cycling between its strong and weak conformations and to changes in the number of strong cross-bridges. Cross-bridge cycling kinetics and muscle economy are length-independent and the Frank-Starling Law cannot be attributed to changes in the force per cross-bridge or in the single cross-bridge cycling rates. Copyright © 2015 Elsevier Ltd. All rights reserved.

Homopolymer tail-mediated ligation PCR: a streamlined and highly efficient method for DNA cloning and library construction

PubMed Central

Lazinski, David W.; Camilli, Andrew

2013-01-01

The amplification of DNA fragments, cloned between user-defined 5′ and 3′ end sequences, is a prerequisite step in the use of many current applications including massively parallel sequencing (MPS). Here we describe an improved method, called homopolymer tail-mediated ligation PCR (HTML-PCR), that requires very little starting template, minimal hands-on effort, is cost-effective, and is suited for use in high-throughput and robotic methodologies. HTML-PCR starts with the addition of homopolymer tails of controlled lengths to the 3′ termini of a double-stranded genomic template. The homopolymer tails enable the annealing-assisted ligation of a hybrid oligonucleotide to the template's recessed 5′ ends. The hybrid oligonucleotide has a user-defined sequence at its 5′ end. This primer, together with a second primer composed of a longer region complementary to the homopolymer tail and fused to a second 5′ user-defined sequence, are used in a PCR reaction to generate the final product. The user-defined sequences can be varied to enable compatibility with a wide variety of downstream applications. We demonstrate our new method by constructing MPS libraries starting from nanogram and sub-nanogram quantities of Vibrio cholerae and Streptococcus pneumoniae genomic DNA. PMID:23311318