Vaccines against advanced melanoma.

PubMed

Blanchard, Tatiana; Srivastava, Pramod K; Duan, Fei

2013-01-01

Research shows that cancers are recognized by the immune system but that the immune recognition of tumors does not uniformly result in tumor rejection or regression. Quantitating the success or failure of the immune system in tumor elimination is difficult because we do not really know the total numbers of encounters of the immune system with the tumors. Regardless of that important issue, recognition of the tumor by the immune system implicitly contains the idea of the tumor antigen, which is what is actually recognized. We review the molecular identity of all forms of tumor antigens (antigens with specific mutations, cancer-testis antigens, differentiation antigens, over-expressed antigens) and discuss the use of these multiple forms of antigens in experimental immunotherapy of mouse and human melanoma. These efforts have been uniformly unsuccessful; however, the approaches that have not worked or have somewhat worked have been the source of many new insights into melanoma immunology. From a critical review of the various approaches to vaccine therapy we conclude that individual cancer-specific mutations are truly the only sources of cancer-specific antigens, and therefore, the most attractive targets for immunotherapy. Published by Elsevier Inc.

Intra-reach headwater fish assemblage structure

USGS Publications Warehouse

McKenna, James E.

2017-01-01

Large-scale conservation efforts can take advantage of modern large databases and regional modeling and assessment methods. However, these broad-scale efforts often assume uniform average habitat conditions and/or species assemblages within stream reaches.

School Violence and Its Effect on the Constitutionality of Public School Uniform Policies.

ERIC Educational Resources Information Center

Starr, Jennifer

2000-01-01

The Arizona Court of Appeals, in the first court decision regarding public school uniform policies, held that mandatory school uniforms do not violate students' First Amendment rights. Discusses the Arizona decision and its effect on the structuring of school uniform policies and their potential successful institution at the high school level. (31…

Implementing Assessment Engineering in the Uniform Certified Public Accountant (CPA) Examination

ERIC Educational Resources Information Center

Burke, Matthew; Devore, Richard; Stopek, Josh

2013-01-01

This paper describes efforts to bring principled assessment design to a large-scale, high-stakes licensure examination by employing the frameworks of Assessment Engineering (AE), the Revised Bloom's Taxonomy (RBT), and Cognitive Task Analysis (CTA). The Uniform CPA Examination is practice-oriented and focuses on the skills of accounting. In…

Enabling comparative effectiveness research with informatics: show me the data!

PubMed

Safdar, Nabile M; Siegel, Eliot; Erickson, Bradley J; Nagy, Paul

2011-09-01

Both outcomes researchers and informaticians are concerned with information and data. As such, some of the central challenges to conducting successful comparative effectiveness research can be addressed with informatics solutions. Specific informatics solutions which address how data in comparative effectiveness research are enriched, stored, shared, and analyzed are reviewed. Imaging data can be made more quantitative, uniform, and structured for researchers through the use of lexicons and structured reporting. Secure and scalable storage of research data is enabled through data warehouses and cloud services. There are a number of national efforts to help researchers share research data and analysis tools. There is a diverse arsenal of informatics tools designed to meet the needs of comparative effective researchers. Copyright © 2011 AUR. Published by Elsevier Inc. All rights reserved.

Materials characterization of propellants using ultrasonics

NASA Technical Reports Server (NTRS)

Workman, Gary L.; Jones, David

1993-01-01

Propellant characteristics for solid rocket motors were not completely determined for its use as a processing variable in today's production facilities. A major effort to determine propellant characteristics obtainable through ultrasonic measurement techniques was performed in this task. The information obtained was then used to determine the uniformity of manufacturing methods and/or the ability to determine non-uniformity in processes.

Dressed for success.

PubMed

Shuttleworth, Ann

Nothing is more symbolic of nursing than its uniform. Reflecting rank, employer, social trends and even infection control policy--uniform changes since Nursing Times launched in 1905 provide a visual history of the profession, as Ann Shuttleworth explains.

Dressed for Success? The Effect of School Uniforms on Student Achievement and Behavior. NBER Working Paper No. 17337

ERIC Educational Resources Information Center

Gentile, Elisabetta; Imberman, Scott A.

2011-01-01

Uniform use in public schools is rising, but we know little about how they affect students. Using a unique dataset from a large urban school district in the southwest United States, we assess how uniforms affect behavior, achievement and other outcomes. Each school in the district determines adoption independently, providing variation over schools…

A unified structural/terminological interoperability framework based on LexEVS: application to TRANSFoRm.

PubMed

Ethier, Jean-François; Dameron, Olivier; Curcin, Vasa; McGilchrist, Mark M; Verheij, Robert A; Arvanitis, Theodoros N; Taweel, Adel; Delaney, Brendan C; Burgun, Anita

2013-01-01

Biomedical research increasingly relies on the integration of information from multiple heterogeneous data sources. Despite the fact that structural and terminological aspects of interoperability are interdependent and rely on a common set of requirements, current efforts typically address them in isolation. We propose a unified ontology-based knowledge framework to facilitate interoperability between heterogeneous sources, and investigate if using the LexEVS terminology server is a viable implementation method. We developed a framework based on an ontology, the general information model (GIM), to unify structural models and terminologies, together with relevant mapping sets. This allowed a uniform access to these resources within LexEVS to facilitate interoperability by various components and data sources from implementing architectures. Our unified framework has been tested in the context of the EU Framework Program 7 TRANSFoRm project, where it was used to achieve data integration in a retrospective diabetes cohort study. The GIM was successfully instantiated in TRANSFoRm as the clinical data integration model, and necessary mappings were created to support effective information retrieval for software tools in the project. We present a novel, unifying approach to address interoperability challenges in heterogeneous data sources, by representing structural and semantic models in one framework. Systems using this architecture can rely solely on the GIM that abstracts over both the structure and coding. Information models, terminologies and mappings are all stored in LexEVS and can be accessed in a uniform manner (implementing the HL7 CTS2 service functional model). The system is flexible and should reduce the effort needed from data sources personnel for implementing and managing the integration.

Imaging at ultrahigh magnetic fields: History, challenges, and solutions.

PubMed

Uğurbil, Kamil

2018-03-01

Following early efforts in applying nuclear magnetic resonance (NMR) spectroscopy to study biological processes in intact systems, and particularly since the introduction of 4 T human scanners circa 1990, rapid progress was made in imaging and spectroscopy studies of humans at 4 T and animal models at 9.4 T, leading to the introduction of 7 T and higher magnetic fields for human investigation at about the turn of the century. Work conducted on these platforms has provided numerous technological solutions to challenges posed at these ultrahigh fields, and demonstrated the existence of significant advantages in signal-to-noise ratio and biological information content. Primary difference from lower fields is the deviation from the near field regime at the radiofrequencies (RF) corresponding to hydrogen resonance conditions. At such ultrahigh fields, the RF is characterized by attenuated traveling waves in the human body, which leads to image non-uniformities for a given sample-coil configuration because of destructive and constructive interferences. These non-uniformities were initially considered detrimental to progress of imaging at high field strengths. However, they are advantageous for parallel imaging in signal reception and transmission, two critical technologies that account, to a large extend, for the success of ultrahigh fields. With these technologies and improvements in instrumentation and imaging methods, today ultrahigh fields have provided unprecedented gains in imaging of brain function and anatomy, and started to make inroads into investigation of the human torso and extremities. As extensive as they are, these gains still constitute a prelude to what is to come given the increasingly larger effort committed to ultrahigh field research and development of ever better instrumentation and techniques. Copyright © 2017 Elsevier Inc. All rights reserved.

A unified structural/terminological interoperability framework based on LexEVS: application to TRANSFoRm

PubMed Central

Ethier, Jean-François; Dameron, Olivier; Curcin, Vasa; McGilchrist, Mark M; Verheij, Robert A; Arvanitis, Theodoros N; Taweel, Adel; Delaney, Brendan C; Burgun, Anita

2013-01-01

Objective Biomedical research increasingly relies on the integration of information from multiple heterogeneous data sources. Despite the fact that structural and terminological aspects of interoperability are interdependent and rely on a common set of requirements, current efforts typically address them in isolation. We propose a unified ontology-based knowledge framework to facilitate interoperability between heterogeneous sources, and investigate if using the LexEVS terminology server is a viable implementation method. Materials and methods We developed a framework based on an ontology, the general information model (GIM), to unify structural models and terminologies, together with relevant mapping sets. This allowed a uniform access to these resources within LexEVS to facilitate interoperability by various components and data sources from implementing architectures. Results Our unified framework has been tested in the context of the EU Framework Program 7 TRANSFoRm project, where it was used to achieve data integration in a retrospective diabetes cohort study. The GIM was successfully instantiated in TRANSFoRm as the clinical data integration model, and necessary mappings were created to support effective information retrieval for software tools in the project. Conclusions We present a novel, unifying approach to address interoperability challenges in heterogeneous data sources, by representing structural and semantic models in one framework. Systems using this architecture can rely solely on the GIM that abstracts over both the structure and coding. Information models, terminologies and mappings are all stored in LexEVS and can be accessed in a uniform manner (implementing the HL7 CTS2 service functional model). The system is flexible and should reduce the effort needed from data sources personnel for implementing and managing the integration. PMID:23571850

Wind-Driven Montgolfiere Balloons for Mars

NASA Technical Reports Server (NTRS)

Jones, Jack A.; Fairbrother, Debora; Lemieux, Aimee; Lachenmeier, Tim; Zubrin, Robert

2005-01-01

Solar Montgolfiere balloons, or solar-heated hot air balloons have been evaluated by use on Mars for about 5 years. In the past, JPL has developed thermal models that have been confirmed, as well as developed altitude control systems to allow the balloons to float over the landscape or carry ground sampling instrumentation. Pioneer Astronautics has developed and tested a landing system for Montgolfieres. JPL, together with GSSL. have successfully deployed small Montgolfieres (<15-m diameter) in the earth's stratosphere, where conditions are similar to a Mars deployment. Two larger Montgolfieres failed, however, and a series of larger scale Montgolfieres is now planned using stronger, more uniform polyethylene bilaminate, combined with stress-reducing ripstitch and reduced parachute deceleration velocities. This program, which is presently under way, is a joint effort between JPL, WFF, and GSSL, and is planned for completion in three years.

Uniform Foam Crush Testing for Multi-Mission Earth Entry Vehicle Impact Attenuation

NASA Technical Reports Server (NTRS)

Patterson, Byron W.; Glaab, Louis J.

2012-01-01

Multi-Mission Earth Entry Vehicles (MMEEVs) are blunt-body vehicles designed with the purpose of transporting payloads from outer space to the surface of the Earth. To achieve high-reliability and minimum weight, MMEEVs avoid use of limited-reliability systems, such as parachutes and retro-rockets, instead using built-in impact attenuators to absorb energy remaining at impact to meet landing loads requirements. The Multi-Mission Systems Analysis for Planetary Entry (M-SAPE) parametric design tool is used to facilitate the design of MMEEVs and develop the trade space. Testing was conducted to characterize the material properties of several candidate impact foam attenuators to enhance M-SAPE analysis. In the current effort, four different Rohacell foams are tested at three different, uniform, strain rates (approximately 0.17, approximately 100, approximately 13,600%/s). The primary data analysis method uses a global data smoothing technique in the frequency domain to remove noise and system natural frequencies. The results from the data indicate that the filter and smoothing technique are successful in identifying the foam crush event and removing aberrations. The effect of strain rate increases with increasing foam density. The 71-WF-HT foam may support Mars Sample Return requirements. Several recommendations to improve the drop tower test technique are identified.

Computational Issues Associated with Temporally Deforming Geometries Such as Thrust Vectoring Nozzles

NASA Technical Reports Server (NTRS)

Boyalakuntla, Kishore; Soni, Bharat K.; Thornburg, Hugh J.; Yu, Robert

1996-01-01

During the past decade, computational simulation of fluid flow around complex configurations has progressed significantly and many notable successes have been reported, however, unsteady time-dependent solutions are not easily obtainable. The present effort involves unsteady time dependent simulation of temporally deforming geometries. Grid generation for a complex configuration can be a time consuming process and temporally varying geometries necessitate the regeneration of such grids for every time step. Traditional grid generation techniques have been tried and demonstrated to be inadequate to such simulations. Non-Uniform Rational B-splines (NURBS) based techniques provide a compact and accurate representation of the geometry. This definition can be coupled with a distribution mesh for a user defined spacing. The present method greatly reduces cpu requirements for time dependent remeshing, facilitating the simulation of more complex unsteady problems. A thrust vectoring nozzle has been chosen to demonstrate the capability as it is of current interest in the aerospace industry for better maneuverability of fighter aircraft in close combat and in post stall regimes. This current effort is the first step towards multidisciplinary design optimization which involves coupling the aerodynamic heat transfer and structural analysis techniques. Applications include simulation of temporally deforming bodies and aeroelastic problems.

Law Enforcement Agency Defibrillation (LEA-D): proceedings of the National Center for Early Defibrillation Police AED Issues Forum.

PubMed

Mosesso, Vincent N; Newman, Mary M; Ornato, Joseph P; Paris, Paul M; Andersen, Leon; Brinsfield, Kathryn; Dunnavant, Gregory R; Frederick, Jay; Groh, William J; Johnston, Steven; Lerner, E Brooke; Murphy, George P; Myerburg, Robert J; Rosenberg, Donald G; Savino, Mitchell; Sayre, Michael R; Sciammarella, Joseph; Schoen, Valerie; Vargo, Philip; van Alem, Anouk; White, Roger D

2002-01-01

Why does LEA-D intervention seem to work in some systems but not others? Panelists agreed that some factors that delay rapid access to treatment, such as long travel distances in rural areas, may represent insurmountable barriers. Other factors, however, may be addressed more readily. These include: absence of a medical response culture, discomfort with the role of medical intervention, insecurity with the use of medical devices, a lack of proactive medical direction, infrequent refresher training, and dependence on EMS intervention. Panelists agreed that successful LEA-D programs possess ten key attributes (Table 6). In the end, the goal remains "early" defibrillation, not "police" defibrillation. It does not matter whether the rescuer wears a blue uniform--or any uniform, for that matter--so long as the defibrillator reaches the victim quickly. If LEA personnel routinely arrive at medical emergencies after other emergency responders or after 8 minutes have elapsed from the time of collapse, an LEA-D program will be unlikely to provide added value. Similarly, if police frequently arrive first, but the department is unwilling or unable to cultivate the attributes of successful LEA-D programs, efforts to improve survival may not be realized. In most communities, however, LEA-D programs have tremendous lifesaving potential and are well worth the investment of time and resources. Law enforcement agencies considering adoption of AED programs should review the frequency with which police arrive first at medical emergencies and LEA response intervals to determine whether AED programs might help improve survival in their communities. It is time for law enforcement agency defibrillation to become the rule, not the exception.

Productive and Ineffective Efforts: How Student Effort in High School Mathematics Relates to College Calculus Success

ERIC Educational Resources Information Center

Barnett, M.D.; Sonnert, G.; Sadler, P.M.

2014-01-01

Relativizing the popular belief that student effort is the key to success, this article finds that effort in the most advanced mathematics course in US high schools is not consistently associated with college calculus performance. We distinguish two types of student effort: productive and ineffective efforts. Whereas the former carries the…

Development of Uniform Protocol for Alopecia Areata Clinical Trials.

PubMed

Solomon, James A

2015-11-01

Developing a successful treatment for alopecia areata (AA), clearly has not been at the forefront of the agenda for new drug/device development among the pharmaceutical and medical device industry. The National Alopecia Areata Foundation (NAAF), a patient advocacy group, initiated a plan to facilitate and drive clinical research toward finding safe and efficacious treatments for AA. As such, Alopecia Areata Uniform Protocols for clinical trials to test new treatments for AA were developed. The design of the uniform protocol is to accomplish the development of a plug-and-play template as well as to provide a framework wherein data from studies utilizing the uniform protocol can be compared through consistency of inclusions/exclusions, safety, and outcome assessment measures. A core uniform protocol for use by pharmaceutical companies in testing proof of concept for investigational products to treat AA. The core protocol includes standardized title, informed consent, inclusion/exclusion criteria, disease outcome assessments, and safety assessments. The statistical methodology to assess successful outcomes will also be standardized. The protocol as well as the informed consent form has been approved in concept by Liberty IRB and is ready to present to pharmaceutical companies.

Aluminum alloy AA-6061 and RSA-6061 heat treatment for large mirror applications

NASA Astrophysics Data System (ADS)

Newswander, T.; Crowther, B.; Gubbels, G.; Senden, R.

2013-09-01

Aluminum mirrors and telescopes can be built to perform well if the material is processed correctly and can be relatively low cost and short schedule. However, the difficulty of making high quality aluminum telescopes increases as the size increases, starting with uniform heat treatment through the thickness of large mirror substrates. A risk reduction effort was started to build and test a ½ meter diameter super polished aluminum mirror. Material selection, the heat treatment process and stabilization are the first critical steps to building a successful mirror. In this study, large aluminum blanks of both conventional AA-6061 per AMS-A-22771 and RSA AA-6061 were built, heat treated and stress relieved. Both blanks were destructively tested with a cut through the thickness. Hardness measurements and tensile tests were completed. We present our results in this paper and make suggestions for modification of procedures and future work.

Complex Greenland outlet glacier flow captured

PubMed Central

Aschwanden, Andy; Fahnestock, Mark A.; Truffer, Martin

2016-01-01

The Greenland Ice Sheet is losing mass at an accelerating rate due to increased surface melt and flow acceleration in outlet glaciers. Quantifying future dynamic contributions to sea level requires accurate portrayal of outlet glaciers in ice sheet simulations, but to date poor knowledge of subglacial topography and limited model resolution have prevented reproduction of complex spatial patterns of outlet flow. Here we combine a high-resolution ice-sheet model coupled to uniformly applied models of subglacial hydrology and basal sliding, and a new subglacial topography data set to simulate the flow of the Greenland Ice Sheet. Flow patterns of many outlet glaciers are well captured, illustrating fundamental commonalities in outlet glacier flow and highlighting the importance of efforts to map subglacial topography. Success in reproducing present day flow patterns shows the potential for prognostic modelling of ice sheets without the need for spatially varying parameters with uncertain time evolution. PMID:26830316

Development of an advanced antineutrino detector for reactor monitoring

DOE PAGES

Classen, T.; Bernstein, A.; Bowden, N. S.; ...

2014-11-05

We present the development of a compact antineutrino detector for the purpose of nuclear reactor monitoring, improving upon a previously successful design. Our paper will describe the design improvements of the detector which increases the antineutrino detection efficiency threefold over the previous effort. There are two main design improvements over previous generations of detectors for nuclear reactor monitoring: dual-ended optical readout and single volume detection mass. The dual-ended optical readout eliminates the need for fiducialization and increases the uniformity of the detector's optical response. The containment of the detection mass in a single active volume provides more target mass permore » detector footprint, a key design criteria for operating within a nuclear power plant. This technology could allow for real-time monitoring of the evolution of a nuclear reactor core, independent of reactor operator declarations of fuel inventories, and may be of interest to the safeguards community.« less

Uniform Doping in Quantum-Dots-Based Dilute Magnetic Semiconductor.

PubMed

Saha, Avijit; Shetty, Amitha; Pavan, A R; Chattopadhyay, Soma; Shibata, Tomohiro; Viswanatha, Ranjani

2016-07-07

Effective manipulation of magnetic spin within a semiconductor leading to a search for ferromagnets with semiconducting properties has evolved into an important field of dilute magnetic semiconductors (DMS). Although a lot of research is focused on understanding the still controversial origin of magnetism, efforts are also underway to develop new materials with higher magnetic temperatures for spintronics applications. However, so far, efforts toward quantum-dots(QDs)-based DMS materials are plagued with problems of phase separation, leading to nonuniform distribution of dopant ions. In this work, we have developed a strategy to synthesize highly crystalline, single-domain DMS system starting from a small magnetic core and allowing it to diffuse uniformly inside a thick CdS semiconductor matrix and achieve DMS QDs. X-ray absorption fine structure (XAFS) spectroscopy and energy-dispersive X-ray spectroscopy-scanning transmission electron microscopy (STEM-EDX) indicates the homogeneous distribution of magnetic impurities inside the semiconductor QDs leading to superior magnetic property. Further, the versatility of this technique was demonstrated by obtaining ultra large particles (∼60 nm) with uniform doping concentration as well as demonstrating the high quality magnetic response.

2008 Post-Election Voting Survey of Uniformed Service Members: Stastical Methodology Report

DTIC Science & Technology

2009-08-01

Research Fellow assisted in formatting this report. Data Recognition Corporation (DRC) performed data collection and editing. DMDC’s Survey...METHODOLOGY REPORT Executive Summary The Uniformed and Overseas Citizens Absentee Voting Act of 1986 (UOCAVA), 42 USC 1973ff, permits members of...citizens covered by UOCAVA, (2) to assess the impact of the FVAP’s efforts to simplify and ease the process of voting absentee , (3) to evaluate other

2008 Post-Election Voting Survey of Federal Civilians Overseas: Statistical Methodology Report

DTIC Science & Technology

2009-08-01

Westat, Inc. developed weights for this survey. Westat performed data collection and editing. DMDC’s Survey Technology Branch, under the guidance...Summary The Uniformed and Overseas Citizens Absentee Voting Act of 1986 (UOCAVA), 42 USC 1973ff, permits members of the Uniformed Services and...assess the impact of the FVAP’s efforts to simplify and ease the process of voting absentee , (3) to evaluate other progress made to facilitate voting

Guidelines for producing quality longleaf pine seeds

Treesearch

James P. Barnett; John M. McGilvray

2002-01-01

Longleaf pine (Pinus palustris Mill.) seeds are sensitive to damage during collection, processing, treatment, and storage. High-quality seeds are essential for successfully producing nursery crops that meet management goals and perform well in the field. Uniformity in the production of pine seedlings primarily depends on prompt and uniform seed...

Management of hepatoblastoma: an update.

PubMed

Kremer, Nathalie; Walther, Ashley E; Tiao, Gregory M

2014-06-01

To summarize the current standards and guidelines for the diagnosis and management of hepatoblastoma, a rare pediatric liver tumor. Hepatoblastoma is the most common malignant liver tumor in childhood. International collaborative efforts have led to uniform implementation of the pretreatment extent of disease (PRETEXT) staging system as a means to establish consensus classification and assess upfront resectability. Additionally, current histopathological classification, in light of more advanced molecular profiling and immunohistochemical techniques and integration of tumor biomarkers into risk stratification, is reviewed. Multimodal therapy is composed of chemotherapy and surgical intervention. Achievement of complete surgical resection plays a key role in successful treatment for hepatoblastoma. Overall, outcomes have greatly improved over the past four decades because of advances in chemotherapeutic agents and administration protocols as well as innovations of surgical approach, including the use of vascular exclusion, ultrasonic dissection techniques, and liver transplantation. Challenges remain in management of high-risk patients as well as patients with recurrent or metastatic disease. Eventually, a more individualized approach to treating the different types of the heterogeneous spectrum of hepatoblastoma, in terms of different chemotherapeutic protocols and timing as well as type and extent of surgery, may become the basis of successful treatment in the more complex or advanced types of hepatoblastoma.

Towards a World Catalogue of Standards

ERIC Educational Resources Information Center

Kuiper, Barteld E.

1973-01-01

The International Organization for Standardization (ISO) efforts to develop a uniform catalog of integrated standard indexes from around the world are described. The purpose is to facilitate the search for standards. (SM)

Algebraic grid adaptation method using non-uniform rational B-spline surface modeling

NASA Technical Reports Server (NTRS)

Yang, Jiann-Cherng; Soni, B. K.

1992-01-01

An algebraic adaptive grid system based on equidistribution law and utilized by the Non-Uniform Rational B-Spline (NURBS) surface for redistribution is presented. A weight function, utilizing a properly weighted boolean sum of various flow field characteristics is developed. Computational examples are presented to demonstrate the success of this technique.

Uniformly thinned optical fibers produced via HF etching with spectral and microscopic verification.

PubMed

Bal, Harpreet K; Brodzeli, Zourab; Dragomir, Nicoleta M; Collins, Stephen F; Sidiroglou, Fotios

2012-05-01

A method for producing uniformly thinned (etched) optical fibers is described, which can also be employed to etch optical fibers containing a Bragg grating (FBG) uniformly for evanescent-field-based sensing and other applications. Through a simple modification of this method, the fabrication of phase-shifted FBGs based on uneven etching is also shown. The critical role of how a fiber is secured is shown, and the success of the method is illustrated, by differential interference contrast microscopy images of uniformly etched FBGs. An etched FBG sensor for the monitoring of the refractive index of different glycerin solutions is demonstrated.

Prospects of complete feed system in ruminant feeding: A review

PubMed Central

Beigh, Yasir Afzal; Ganai, Abdul Majeed; Ahmad, Haidar Ali

2017-01-01

Effective utilization of available feed resources is the key for economical livestock rearing. Complete feed system is one of the latest developments to exploit the potential of animal feed resources in the best possible way. The complete feed is a quantitative mixture of all dietary ingredients, blended thoroughly to prevent separation and selection, fed as a sole source of nutrients except water and is formulated in a desired proportion to meet the specific nutrient requirements. The concentrate and roughage levels may vary according to the nutrient requirement of ruminants for different production purposes. The complete feed with the use of fibrous crop residue is a noble way to increase the voluntary feed intake and thus animal’s production performance. In this system of feeding, the ruminant animals have continuous free choice availability of uniform feed mixture, resulting in more uniform load on the rumen and less fluctuation in release of ammonia which supports more efficient utilization of ruminal non-protein nitrogen. Feeding complete diet stabilizes ruminal fermentation, thereby improves nutrient utilization. This feeding system allows expanded use of agro-industrial by­products, crop residues and nonconventional feeds in ruminant ration for maximizing production and minimizing feeding cost, thus being increasingly appreciated. However, to extend the concept extensively to the field and make this technology successful and viable for farmers, more efforts are needed to be taken. PMID:28507415

In-Flight Performance of the Polarization Modulator in the CLASP Rocket Experiment

NASA Technical Reports Server (NTRS)

Ishikawa, S.; Shimizu, T.; Kano, R.; Bando, T.; Ishikawa, R.; Giono, G.; Beabout, D.; Beabout, B.; Nakayama, S.; Tajima, T.

2016-01-01

We developed a polarization modulation unit (PMU), a motor system to rotate a waveplate continuously. We applied this PMU for the Chromospheric Lyman-alpha SpectroPolarimeter (CLASP), a sounding rocket experiment to observe the linear polarization of the Lyman-alpha emission (121.6 nm vacuum ultraviolet) from the upper chromosphere and transition region of the Sun with a high polarization sensitivity of 0.1% for the first time and investigate the vector magnetic field. Rotation non-uniformity of the waveplate causes error in the polarization degree (i.e. scale error) and crosstalk between Stokes components. In the ground tests, we confirmed that PMU has superior rotation uniformity. CLASP was successfully launched on September 3, 2015, and PMU functioned well as designed. PMU achieved a good rotation uniformity during the flight and the high precision polarization measurement of CLASP was successfully achieved.

Propulsion and Energetics Panel Working Group 15 on the Uniform Engine Test Programme

DTIC Science & Technology

1990-02-01

earlier test of uniform aerodynamic models in wind tunnels under the auspices of the Fluid Dynamics Panel. A formal proposal was presented to the...this major new effort and members of the engine test community throughout AGARD were selected to serve on Working Group 15 along with PEP...STPA/MO 4 Mr J.R.Bednarsk; 4 Avenue de Ia Porte d’lssy PE-63 75015 Paris Naval Air Propulsion Center PO Box 7176 GERMANY Trenton. New Jersey 08628

Effects of beam irregularity on uniform scanning

NASA Astrophysics Data System (ADS)

Kim, Chang Hyeuk; Jang, Sea duk; Yang, Tae-Keun

2016-09-01

An active scanning beam delivery method has many advantages in particle beam applications. For the beam is to be successfully delivered to the target volume by using the active scanning technique, the dose uniformity must be considered and should be at least 2.5% in the case of therapy application. During beam irradiation, many beam parameters affect the 2-dimensional uniformity at the target layer. A basic assumption in the beam irradiation planning stage is that the shape of the beam is symmetric and follows a Gaussian distribution. In this study, a pure Gaussian-shaped beam distribution was distorted by adding parasitic Gaussian distribution. An appropriate uniform scanning condition was deduced by using a quantitative analysis based on the gamma value of the distorted beam and 2-dimensional uniformities.

Retroreflectivity of existing signs in Pennsylvania.

DOT National Transportation Integrated Search

2012-04-01

The Pennsylvania Department of Transportation (PennDOT) Bureau of Highway Safety and Traffic Engineering initiated this : research effort in response to the release of the new 2009 Manual on Uniform Traffic Control Devices (MUTCD) which mandates : th...

Development and Performance of the Alaska Transportable Array Posthole Broadband Seismic Station

NASA Astrophysics Data System (ADS)

Aderhold, K.; Enders, M.; Miner, J.; Bierma, R. M.; Bloomquist, D.; Theis, J.; Busby, R. W.

2017-12-01

The final stations of the Alaska Transportable Array (ATA) will be constructed in 2017, completing the full footprint of 280 new and existing broadband seismic stations stretching across 19 degrees of latitude from western Alaska to western Canada. Through significant effort in planning, site reconnaissance, permitting and the considerable and concerted effort of field crews, the IRIS Alaska TA team is on schedule to successfully complete the construction of 194 new stations and upgrades at 28 existing stations over four field seasons. The station design and installation method was developed over the course of several years, leveraging the experience of the L48 TA deployments and existing network operators in Alaska as well as incorporating newly engineered components and procedures. A purpose-built lightweight drill was designed and fabricated to facilitate the construction of shallow boreholes to incorporate newly available posthole seismometers. This allowed for the development of a streamlined system of procedures to manufacture uniform seismic stations with minimal crew and minimal time required at each station location. A new station can typically be constructed in a single day with a four-person field crew. The ATA utilizes a hammer-drilled, cased posthole emplacement method adapted to the remote and harsh working environment of Alaska. The same emplacement design is implemented in all ground conditions to preserve uniformity across the array and eliminate the need for specialized mechanical equipment. All components for station construction are ideally suited for transport via helicopter, and can be adapted to utilize more traditional methods of transportation when available. This emplacement design delivers high quality data when embedded in bedrock or permafrost, reaching the low noise levels of benchmark permanent global broadband stations especially at long periods over 70 seconds. The TA will operate the network of real-time stations through at least 2019, with service trips planned on a "as needed" basis to continue providing greater than 95% data return.

Evaluation of acoustic telemetry grids for determining aquatic animal movement and survival

USGS Publications Warehouse

Kraus, Richard T.; Holbrook, Christopher; Vandergoot, Christopher; Stewart, Taylor R.; Faust, Matthew D.; Watkinson, Douglas A.; Charles, Colin; Pegg, Mark; Enders, Eva C.; Krueger, Charles C.

2018-01-01

Acoustic telemetry studies have frequently prioritized linear configurations of hydrophone receivers, such as perpendicular from shorelines or across rivers, to detect the presence of tagged aquatic animals. This approach introduces unknown bias when receivers are stationed for convenience at geographic bottlenecks (e.g., at the mouth of an embayment or between islands) as opposed to deployments following a statistical sampling design.We evaluated two-dimensional acoustic receiver arrays (grids: receivers spread uniformly across space) as an alternative approach to provide estimates of survival, movement, and habitat use. Performance of variably-spaced receiver grids (5–25 km spacing) was evaluated by simulating (1) animal tracks as correlated random walks (speed: 0.1–0.9 m/s; turning angle standard deviation: 5–30 degrees); (2) variable tag transmission intervals along each track (nominal delay: 15–300 seconds); and (3) probability of detection of each transmission based on logistic detection range curves (midpoint: 200–1500 m). From simulations, we quantified i) time between successive detections on any receiver (detection time), ii) time between successive detections on different receivers (transit time), and iii) distance between successive detections on different receivers (transit distance).In the most restrictive detection range scenario (200 m), the 95th percentile of transit time was 3.2 days at 5 km grid spacing, 5.7 days at 7 km, and 15.2 days at 25 km; for the 1500 m detection range scenario, it was 0.1 days at 5 km, 0.5 days at 7 km, and 10.8 days at 25 km. These values represented upper bounds on the expected maximum time that an animal could go undetected. Comparison of the simulations with pilot studies on three fishes (walleye Sander vitreus, common carp Cyprinus carpio, and channel catfish Ictalurus punctatus) from two independent large lake ecosystems (lakes Erie and Winnipeg) revealed shorter detection and transit times than what simulations predicted.By spreading effort uniformly across space, grids can improve understanding of fish migration over the commonly employed receiver line approach, but at increased time cost for maintaining grids.

Investigation of thickness uniformity of thin metal films by using α-particle energy loss method and successive scanning measurements

NASA Astrophysics Data System (ADS)

Li, Gang; Xu, Jiayun; Bai, Lixin

2017-03-01

The metal films are widely used in the Inertial Confinement Fusion (ICF) experiments to obtain the radiation opacity, and the accuracy of the measuring results mainly depends on the accuracy of the film thickness and thickness uniformity. The traditional used measuring methods all have various disadvantages, the optical method and stylus method cannot provide mass thickness which reflects the internal density distribution of the films, and the weighing method cannot provide the uniformity of the thickness distribution. This paper describes a new method which combines the α-particle energy loss (AEL) method and the successive scanning measurements to obtain the film thickness and thickness uniformity. The measuring system was partly installed in the vacuum chamber, and the relationship of chamber pressure and energy loss caused by the residual air in the vacuum chamber was studied for the source-to-detector distance ranging from 1 to 5 cm. The results show that the chamber pressure should be less than 10 Pa for the present measuring system. In the process of measurement, the energy spectrum of α-particles transmitted through each different measuring point were obtained, and then recorded automatically by a self-developed multi-channel analysis software. At the same time, the central channel numbers of the spectrum (CH) were also saved in a text form document. In order to realize the automation of data processing and represent the thickness uniformity visually in a graphic 3D plot, a software package was developed to convert the CH values into film thickness and thickness uniformity. The results obtained in this paper make the film thickness uniformity measurements more accurate and efficient in the ICF experiments.

Same organization, same electronic health records (EHRs) system, different use: exploring the linkage between practice member communication patterns and EHR use patterns in an ambulatory care setting

PubMed Central

Leykum, Luci K; McDaniel, Reuben R

2011-01-01

Objective Despite efforts made by ambulatory care organizations to standardize the use of electronic health records (EHRs), practices often incorporate these systems into their work differently from each other. One potential factor contributing to these differences is within-practice communication patterns. The authors explore the linkage between within-practice communication patterns and practice-level EHR use patterns. Design Qualitative study of six practices operating within the same multi-specialty ambulatory care organization using the same EHR system. Semistructured interviews and direct observation were conducted with all physicians, nurses, medical assistants, practice managers, and non-clinical staff from each practice. Measurements An existing model of practice relationships was used to analyze communication patterns within the practices. Practice-level EHR use was defined and analyzed as the ways in which a practice uses an EHR as a collective or a group—including the degree of feature use, level of EHR-enabled communication, and frequency that EHR use changes in a practice. Interview and observation data were analyzed for themes. Based on these themes, within-practice communication patterns were categorized as fragmented or cohesive, and practice-level EHR use patterns were categorized as heterogeneous or homogeneous. Practices where EHR use was uniformly high across all users were further categorized as having standardized EHR use. Communication patterns and EHR use patterns were compared across the six practices. Results Within-practice communication patterns were associated with practice-level EHR use patterns. In practices where communication patterns were fragmented, EHR use was heterogeneous. In practices where communication patterns were cohesive, EHR use was homogeneous. Additional analysis revealed that practices that had achieved standardized EHR use (uniformly high EHR use across all users) exhibited high levels of mindfulness and respectful interaction, whereas practices that were furthest from achieving standardized EHR use exhibited low levels of mindfulness and respectful interaction. Conclusion Within-practice communication patterns provide a unique perspective for exploring the issue of standardization in EHR use. A major fallacy of setting homogeneous EHR use as the goal for practice-level EHR use is that practices with uniformly low EHR use could be considered successful. Achieving uniformly high EHR use across all users in a practice is more consistent with the goals of current EHR adoption and use efforts. It was found that some communication patterns among practice members may enable more standardized EHR use than others. Understanding the linkage between communication patterns and EHR use can inform understanding of the human element in EHR use and may provide key lessons for the implementation of EHRs and other health information technologies. PMID:21846780

Same organization, same electronic health records (EHRs) system, different use: exploring the linkage between practice member communication patterns and EHR use patterns in an ambulatory care setting.

PubMed

Lanham, Holly Jordan; Leykum, Luci K; McDaniel, Reuben R

2012-01-01

Despite efforts made by ambulatory care organizations to standardize the use of electronic health records (EHRs), practices often incorporate these systems into their work differently from each other. One potential factor contributing to these differences is within-practice communication patterns. The authors explore the linkage between within-practice communication patterns and practice-level EHR use patterns. Qualitative study of six practices operating within the same multi-specialty ambulatory care organization using the same EHR system. Semistructured interviews and direct observation were conducted with all physicians, nurses, medical assistants, practice managers, and non-clinical staff from each practice. An existing model of practice relationships was used to analyze communication patterns within the practices. Practice-level EHR use was defined and analyzed as the ways in which a practice uses an EHR as a collective or a group-including the degree of feature use, level of EHR-enabled communication, and frequency that EHR use changes in a practice. Interview and observation data were analyzed for themes. Based on these themes, within-practice communication patterns were categorized as fragmented or cohesive, and practice-level EHR use patterns were categorized as heterogeneous or homogeneous. Practices where EHR use was uniformly high across all users were further categorized as having standardized EHR use. Communication patterns and EHR use patterns were compared across the six practices. Within-practice communication patterns were associated with practice-level EHR use patterns. In practices where communication patterns were fragmented, EHR use was heterogeneous. In practices where communication patterns were cohesive, EHR use was homogeneous. Additional analysis revealed that practices that had achieved standardized EHR use (uniformly high EHR use across all users) exhibited high levels of mindfulness and respectful interaction, whereas practices that were furthest from achieving standardized EHR use exhibited low levels of mindfulness and respectful interaction. Within-practice communication patterns provide a unique perspective for exploring the issue of standardization in EHR use. A major fallacy of setting homogeneous EHR use as the goal for practice-level EHR use is that practices with uniformly low EHR use could be considered successful. Achieving uniformly high EHR use across all users in a practice is more consistent with the goals of current EHR adoption and use efforts. It was found that some communication patterns among practice members may enable more standardized EHR use than others. Understanding the linkage between communication patterns and EHR use can inform understanding of the human element in EHR use and may provide key lessons for the implementation of EHRs and other health information technologies.

Development efforts to improve curved-channel microchannel plates

NASA Technical Reports Server (NTRS)

Corbett, M. B.; Feller, W. B.; Laprade, B. N.; Cochran, R.; Bybee, R.; Danks, A.; Joseph, C.

1993-01-01

Curved-channel microchannel plate (C-plate) improvements resulting from an ongoing NASA STIS microchannel plate (MCP) development program are described. Performance limitations of previous C-plates led to a development program in support of the STIS MAMA UV photon counter, a second generation instrument on the Hubble Space Telescope. C-plate gain, quantum detection efficiency, dark noise, and imaging distortion, which are influenced by channel curvature non-uniformities, have all been improved through use of a new centrifuge fabrication technique. This technique will be described, along with efforts to improve older, more conventional shearing methods. Process optimization methods used to attain targeted C-plate performance goals will be briefly characterized. Newly developed diagnostic measurement techniques to study image distortion, gain uniformity, input bias angle, channel curvature, and ion feedback, will be described. Performance characteristics and initial test results of the improved C-plates will be reported. Future work and applications will also be discussed.

Study of device for precompaction and uniform supply of materials to working bodies of aggregate

NASA Astrophysics Data System (ADS)

Romanovich, A. A.; Kolesnikov, R. S.; Romanovich, M. A.

2018-03-01

The article considers perspective ways of increase of reliability and durability of the press roller grinder due to the uniform supply of crushed materials across the width of the rolls. The mechanism of distribution and pre- compaction of materials in a roller arrangement has been analytically studied, an equation has been derived for calculating the effort expended. The materials of the article are devoted to increasing the reliability of the press roller grinder due to the uniform supply of grindable materials along the width of the rolls and may be of interest to Russian and foreign organizations that carry out their activities in the field of exploitation, designing and manufacturing of crushing and grinding equipment.

The Moon Mineralogy Mapper (M3) imaging spectrometer for lunar science: Instrument description, calibration, on-orbit measurements, science data calibration and on-orbit validation

USGS Publications Warehouse

Green, R.O.; Pieters, C.; Mouroulis, P.; Eastwood, M.; Boardman, J.; Glavich, T.; Isaacson, P.; Annadurai, M.; Besse, S.; Barr, D.; Buratti, B.; Cate, D.; Chatterjee, A.; Clark, R.; Cheek, L.; Combe, J.; Dhingra, D.; Essandoh, V.; Geier, S.; Goswami, J.N.; Green, R.; Haemmerle, V.; Head, J.; Hovland, L.; Hyman, S.; Klima, R.; Koch, T.; Kramer, G.; Kumar, A.S.K.; Lee, Kenneth; Lundeen, S.; Malaret, E.; McCord, T.; McLaughlin, S.; Mustard, J.; Nettles, J.; Petro, N.; Plourde, K.; Racho, C.; Rodriquez, J.; Runyon, C.; Sellar, G.; Smith, C.; Sobel, H.; Staid, M.; Sunshine, J.; Taylor, L.; Thaisen, K.; Tompkins, S.; Tseng, H.; Vane, G.; Varanasi, P.; White, M.; Wilson, D.

2011-01-01

The NASA Discovery Moon Mineralogy Mapper imaging spectrometer was selected to pursue a wide range of science objectives requiring measurement of composition at fine spatial scales over the full lunar surface. To pursue these objectives, a broad spectral range imaging spectrometer with high uniformity and high signal-to-noise ratio capable of measuring compositionally diagnostic spectral absorption features from a wide variety of known and possible lunar materials was required. For this purpose the Moon Mineralogy Mapper imaging spectrometer was designed and developed that measures the spectral range from 430 to 3000 nm with 10 nm spectral sampling through a 24 degree field of view with 0.7 milliradian spatial sampling. The instrument has a signal-to-noise ratio of greater than 400 for the specified equatorial reference radiance and greater than 100 for the polar reference radiance. The spectral cross-track uniformity is >90% and spectral instantaneous field-of-view uniformity is >90%. The Moon Mineralogy Mapper was launched on Chandrayaan-1 on the 22nd of October. On the 18th of November 2008 the Moon Mineralogy Mapper was turned on and collected a first light data set within 24 h. During this early checkout period and throughout the mission the spacecraft thermal environment and orbital parameters varied more than expected and placed operational and data quality constraints on the measurements. On the 29th of August 2009, spacecraft communication was lost. Over the course of the flight mission 1542 downlinked data sets were acquired that provide coverage of more than 95% of the lunar surface. An end-to-end science data calibration system was developed and all measurements have been passed through this system and delivered to the Planetary Data System (PDS.NASA.GOV). An extensive effort has been undertaken by the science team to validate the Moon Mineralogy Mapper science measurements in the context of the mission objectives. A focused spectral, radiometric, spatial, and uniformity validation effort has been pursued with selected data sets including an Earth-view data set. With this effort an initial validation of the on-orbit performance of the imaging spectrometer has been achieved, including validation of the cross-track spectral uniformity and spectral instantaneous field of view uniformity. The Moon Mineralogy Mapper is the first imaging spectrometer to measure a data set of this kind at the Moon. These calibrated science measurements are being used to address the full set of science goals and objectives for this mission. Copyright 2011 by the American Geophysical Union.

The Moon Mineralogy Mapper (M3) imaging spectrometerfor lunar science: Instrument description, calibration, on‐orbit measurements, science data calibration and on‐orbit validation

USGS Publications Warehouse

C. Pieters,; P. Mouroulis,; M. Eastwood,; J. Boardman,; Green, R.O.; Glavich, T.; Isaacson, P.; Annadurai, M.; Besse, S.; Cate, D.; Chatterjee, A.; Clark, R.; Barr, D.; Cheek, L.; Combe, J.; Dhingra, D.; Essandoh, V.; Geier, S.; Goswami, J.N.; Green, R.; Haemmerle, V.; Head, J.; Hovland, L.; Hyman, S.; Klima, R.; Koch, T.; Kramer, G.; Kumar, A.S.K.; Lee, K.; Lundeen, S.; Malaret, E.; McCord, T.; McLaughlin, S.; Mustard, J.; Nettles, J.; Petro, N.; Plourde, K.; Racho, C.; Rodriguez, J.; Runyon, C.; Sellar, G.; Smith, C.; Sobel, H.; Staid, M.; Sunshine, J.; Taylor, L.; Thaisen, K.; Tompkins, S.; Tseng, H.; Vane, G.; Varanasi, P.; White, M.; Wilson, D.

2011-01-01

The NASA Discovery Moon Mineralogy Mapper imaging spectrometer was selected to pursue a wide range of science objectives requiring measurement of composition at fine spatial scales over the full lunar surface. To pursue these objectives, a broad spectral range imaging spectrometer with high uniformity and high signal-to-noise ratio capable of measuring compositionally diagnostic spectral absorption features from a wide variety of known and possible lunar materials was required. For this purpose the Moon Mineralogy Mapper imaging spectrometer was designed and developed that measures the spectral range from 430 to 3000 nm with 10 nm spectral sampling through a 24 degree field of view with 0.7 milliradian spatial sampling. The instrument has a signal-to-noise ratio of greater than 400 for the specified equatorial reference radiance and greater than 100 for the polar reference radiance. The spectral cross-track uniformity is >90% and spectral instantaneous field-of-view uniformity is >90%. The Moon Mineralogy Mapper was launched on Chandrayaan-1 on the 22nd of October. On the 18th of November 2008 the Moon Mineralogy Mapper was turned on and collected a first light data set within 24 h. During this early checkout period and throughout the mission the spacecraft thermal environment and orbital parameters varied more than expected and placed operational and data quality constraints on the measurements. On the 29th of August 2009, spacecraft communication was lost. Over the course of the flight mission 1542 downlinked data sets were acquired that provide coverage of more than 95% of the lunar surface. An end-to-end science data calibration system was developed and all measurements have been passed through this system and delivered to the Planetary Data System (PDS.NASA.GOV). An extensive effort has been undertaken by the science team to validate the Moon Mineralogy Mapper science measurements in the context of the mission objectives. A focused spectral, radiometric, spatial, and uniformity validation effort has been pursued with selected data sets including an Earth-view data set. With this effort an initial validation of the on-orbit performance of the imaging spectrometer has been achieved, including validation of the cross-track spectral uniformity and spectral instantaneous field of view uniformity. The Moon Mineralogy Mapper is the first imaging spectrometer to measure a data set of this kind at the Moon. These calibrated science measurements are being used to address the full set of science goals and objectives for this mission.

Effort, performance, and motivation: insights from robot-assisted training of human golf putting and rat grip strength.

PubMed

Duarte, Jaime E; Gebrekristos, Berkenesh; Perez, Sergi; Rowe, Justin B; Sharp, Kelli; Reinkensmeyer, David J

2013-06-01

Robotic devices can modulate success rates and required effort levels during motor training, but it is unclear how this affects performance gains and motivation. Here we present results from training unimpaired humans in a virtual golf-putting task, and training spinal cord injured (SCI) rats in a grip strength task using robotically modulated success rates and effort levels. Robotic assistance in golf practice increased trainees feelings of competence, and, paradoxically, increased their sense effort, even though it had mixed effects on learning. Reducing effort during a grip strength training task led rats with SCI to practice the task more frequently. However, the more frequent practice of these rats did not cause them to exceed the strength gains achieved by rats that exercised less often at higher required effort levels. These results show that increasing success and decreasing effort with robots increases motivation, but has mixed effects on performance gains.

A Study of Student Involvement Variables in Higher Education Their Influence on Success on the Uniform CPA Examination

ERIC Educational Resources Information Center

Campbell, Linda M.

2012-01-01

Accounting educators are continually seeking ways to better prepare their students for success after graduation. One path to this goal is the successful completion of the CPA exam. This national exam provides an endorsement of the knowledge and comprehension that has been achieved by the candidate and opens up opportunities for advancement. The…

Computer Models Used to Support Cleanup Decision Making at Hazardous and Radioactive Waste Sites

EPA Pesticide Factsheets

This report is a product of the Interagency Environmental Pathway Modeling Workgroup. This report will help bring a uniform approach to solving environmental modeling problems common to site remediation and restoration efforts.

Environmental Characteristics of EPA, NRC, and DOE Sites Contaminated with Radioactive Substances

EPA Pesticide Factsheets

This report is one of several documents developed cooperatively by the Interagency Environmental Pathway Modeling Workgroup to help bring a uniform approach to solving environmental modeling problems common to site remediation and restoration efforts.

Gravitational Influences on Flame Propagation Through Non-Uniform, Premixed Gas Systems

NASA Technical Reports Server (NTRS)

Miller, Fletcher J.; Easton, John; Marchese, Anthony; Hovermann, Fred

2003-01-01

Flame propagation through non-uniformly premixed (or layered) gases has importance both in useful combustion systems and in unintentional fires. As summarized recently and in previous Microgravity Workshop papers, non-uniform premixed gas combustion receives scant attention compared to the more usual limiting cases of diffusion or uniformly premixed flames, especially regarding the role gravity plays. This paper summarizes our recent findings on gravitational effects on layered combustion along a floor, in which the fuel concentration gradient exists normal to the direction of flame spread. In an effort to understand the mechanism by which the flames spread faster in microgravity (and much faster, in laboratory coordinates, than the laminar burning velocity for uniform mixtures), we have begun making pressure measurements across the spreading flame front that are described here. Earlier researchers, testing in 1g, claimed that hydrostatic pressure differences could account for the rapid spread rates. Additionally, we present the development of a new apparatus to study flame spread in free (i.e., far from walls), non-homogeneous fuel layers formed in a flow tunnel behind an airfoil that has been tested in normal gravity.

Exploring the effect of the spatial scale of fishery management.

PubMed

Takashina, Nao; Baskett, Marissa L

2016-02-07

For any spatially explicit management, determining the appropriate spatial scale of management decisions is critical to success at achieving a given management goal. Specifically, managers must decide how much to subdivide a given managed region: from implementing a uniform approach across the region to considering a unique approach in each of one hundred patches and everything in between. Spatially explicit approaches, such as the implementation of marine spatial planning and marine reserves, are increasingly used in fishery management. Using a spatially explicit bioeconomic model, we quantify how the management scale affects optimal fishery profit, biomass, fishery effort, and the fraction of habitat in marine reserves. We find that, if habitats are randomly distributed, the fishery profit increases almost linearly with the number of segments. However, if habitats are positively autocorrelated, then the fishery profit increases with diminishing returns. Therefore, the true optimum in management scale given cost to subdivision depends on the habitat distribution pattern. Copyright © 2015 Elsevier Ltd. All rights reserved.

How did we make the Interdisciplinary Generalist Curriculum Project work? School-level efforts to facilitate success.

PubMed

Matson, C; Davis, A; Steinkohl, D C; Blavo, C

2001-04-01

This article examines how the schools funded by the Interdisciplinary Generalist Curriculum (IGC) Project handled the process of planning and implementing their proposals; incorporated the IGC requirements as templates for changes in educational programs and organizational infrastructures; and identified key educational and management issues that emerged over time. How collaboration flourished at each IGC school was the central functional ingredient for successful implementation. Shared power and support from the dean were essential for success. The need for excellent channels of communication among all constituencies in the process of curricular change cannot be overemphasized. The most common approach was the addition of the new interdisciplinary clinical curriculum to the existing, usually discipline-based, curriculum, with attempts to establish integrative horizontal connections among concurrent courses in years one and two. The integration, sequencing, and correlating of basic science and clinical material occupied much of the IGC course directors' time in the early stages. Several approaches were used to help ensure a beneficial initial clinical experience for medical students, while accepting that a uniform experience for all students was not attainable or necessary. Encouraging active learning on the part of students was a goal of IGC schools' planning in and of itself. The splash of establishing interdisciplinary communication structures and greater melding of disciplinary cultures that occurred at and among the IGC schools appeared to lead to ripple effects that were recognized within the first year of planning and early implementation.

Manual handling: differences in perceived effort, success rate and kinematics between three different pushing techniques.

PubMed

Varcin, Lynn; Claus, Andrew; van den Hoorn, Wolbert; Hodges, Paul

2015-01-01

This study examined the perceived effort, success rates and kinematics for three push strategies in a simulated lateral patient transfer (horizontal slide). Thirteen healthy subjects (four males) completed three repetition pushing loads of 6, 10 and 14 kg in random order; with a spontaneous push strategy, then with a straight-back bent-knees (squat) strategy and the preparatory pelvic movement ('rockback') strategy in random order. Perceived effort and kinematic parameters measured at the onset of movement and at maximum push excursion were compared between strategies and between loads with repeated measures ANOVA. The spontaneous and 'rockback' strategies achieved the pushing task with less perceived effort across all loads than the squat push (P < 0.001). Only 3/13 participants were successful on all attempts at pushing the 14 kg load using a squat strategy, which contrasted with 12/13 participants when the spontaneous strategy or the 'rockback' strategy was used. Forward movement of the pelvis and forward trunk inclination may be positively associated with lower perceived effort in the push task. Practitioner Summary: In a manual-handling task that simulated a lateral patient transfer (horizontal slide), perceived effort and success rates of three push strategies were compared. A straight-back bent-knees push (squat) strategy demonstrated greater perceived effort and lower success rates than a spontaneous push strategy, or a push strategy with preparatory 'rockback' pelvic movement.

New reversing design method for LED uniform illumination.

PubMed

Wang, Kai; Wu, Dan; Qin, Zong; Chen, Fei; Luo, Xiaobing; Liu, Sheng

2011-07-04

In light-emitting diode (LED) applications, it is becoming a big issue that how to optimize light intensity distribution curve (LIDC) and design corresponding optical component to achieve uniform illumination when distance-height ratio (DHR) is given. A new reversing design method is proposed to solve this problem, including design and optimization of LIDC to achieve high uniform illumination and a new algorithm of freeform lens to generate the required LIDC by LED light source. According to this method, two new LED modules integrated with freeform lenses are successfully designed for slim direct-lit LED backlighting with thickness of 10mm, and uniformities of illuminance increase from 0.446 to 0.915 and from 0.155 to 0.887 when DHRs are 2 and 3 respectively. Moreover, the number of new LED modules dramatically decreases to 1/9 of the traditional LED modules while achieving similar uniform illumination in backlighting. Therefore, this new method provides a practical and simple way for optical design of LED uniform illumination when DHR is much larger than 1.

Statistical distributions of avalanche size and waiting times in an inter-sandpile cascade model

NASA Astrophysics Data System (ADS)

Batac, Rene; Longjas, Anthony; Monterola, Christopher

2012-02-01

Sandpile-based models have successfully shed light on key features of nonlinear relaxational processes in nature, particularly the occurrence of fat-tailed magnitude distributions and exponential return times, from simple local stress redistributions. In this work, we extend the existing sandpile paradigm into an inter-sandpile cascade, wherein the avalanches emanating from a uniformly-driven sandpile (first layer) is used to trigger the next (second layer), and so on, in a successive fashion. Statistical characterizations reveal that avalanche size distributions evolve from a power-law p(S)≈S-1.3 for the first layer to gamma distributions p(S)≈Sαexp(-S/S0) for layers far away from the uniformly driven sandpile. The resulting avalanche size statistics is found to be associated with the corresponding waiting time distribution, as explained in an accompanying analytic formulation. Interestingly, both the numerical and analytic models show good agreement with actual inventories of non-uniformly driven events in nature.

Report: EPA Has Improved Efforts to Reduce Unliquidated Obligations in Superfund Cooperative Agreements, But a Uniform Policy Is Needed

EPA Pesticide Factsheets

Report #09-P-0241, September 22, 2009. The regions audited (Regions 3, 5, and 8) have implemented effective procedures to adequately monitor the status of obligations under Superfund Cooperative Agreements.

Taking a Step Forward in Public Health Finance: Establishing Standards for a Uniform Chart of Accounts Crosswalk.

PubMed

Honoré, Peggy A; Leider, Jonathon P; Singletary, Vivian; Ross, David A

2015-01-01

In its 2012 report on the current and future states of public health finance, the Institute of Medicine noted, with concern, the relative lack of capacity for practitioners and researchers alike to make comparisons between health department expenditures across the country. This is due in part to different accounting systems, service portfolios, and state- or agency-specific reporting requirements. The Institute of Medicine called for a uniform chart of accounts, perhaps building on existing efforts such as the Public Health Uniform National Data Systems (PHUND$). Shortly thereafter, a group was convened to work with public health practitioners and researchers to develop a uniform chart of accounts crosswalk. A year-long process was undertaken to create the crosswalk. This commentary discusses that process, challenges encountered along the way and provides a draft crosswalk in line with the Foundational Public Health Services model that, if used by health departments, could allow for meaningful comparisons between agencies.

Food Safety and Quality. Uniform, Risk-Based Inspection System Needed to Ensure Safe Food Supply,

DTIC Science & Technology

1992-06-01

Concerned about the effectiveness of the federal food safety inspection system, the Chairman, Subcommittee on Oversight and Investigations, House...federal resources for inspection, and (3) agencies are effectively coordinating their food safety and quality inspection efforts.

JPRS Report, Near East & South Asia

DTIC Science & Technology

1989-05-15

ment initiatives, based on its principle that effective private sector participation is an important element in the success of investment projects...tariff vis-a-vis the outside world. GCC countries put their Uniform Economic Agreement into effect in March of 1983 but could not meet their five...year deadline for putting a uniform tariff into effect . As the deadline passed without agreement, the GCC secretariat asked the Abu Dhabi summit for a

Productive and ineffective efforts: how student effort in high school mathematics relates to college calculus success

NASA Astrophysics Data System (ADS)

Barnett, M. D.; Sonnert, G.; Sadler, P. M.

2014-10-01

Relativizing the popular belief that student effort is the key to success, this article finds that effort in the most advanced mathematics course in US high schools is not consistently associated with college calculus performance. We distinguish two types of student effort: productive and ineffective efforts. Whereas the former carries the commonly expected benefits, the latter is associated with negative consequences. Time spent reading the course text in US high schools was negatively related to college calculus performance. Daily study time, however, was found to be either a productive or an ineffective effort, depending on the level of high school mathematics course and the student's performance in it.

Biotechnology to harness the benefits of dietary phenolics; focus on Lamiaceae.

PubMed

Shetty, K

1997-09-01

Phytochemicals from herbs and fermented legumes are excellent dietary sources of phenolic metabolites. These phenolics have importance not only as food preservatives but increasingly have therapeutic and pharmaceutical applications. The long-term research objecitves of the food biotechnology program at the University of Massachusetts are to elucidate the molecular and physiological mechanisms associated with synthesis of important health-related, therapeutic phenolic metabolites in food-related plants and fermented plant foods. Current efforts focus on elucidation of the role of the proline-linked pentose phosphate pathway in regulating the synthesis of anti-inflammatory compound, rosmarinic acid (RA). Specific aims of the current research efforts are: (i) To develop novel tissue culture-based selection techniques to isolate high RA-producing, shoot-based clonal lines from genetically heterogeneous, cross-pollinating species in the family Lamiaceae; (ii) To target genetically uniform, regenerated shoot-based clonal lines for: (a) preliminary characterization of key enzymes associated with the pentose phosphate pathway and linked to RA synthesis; (b) development of genetic transformation techniques for subsequent engineering of metabolic pathways associated with RA synthesis. These research objectives have substantial implications for harnessing the genetic and biochemical potential of genetically heterogeneous, food-related medicinal plant species. The success of this research also provides novel methods and strategies to gain access to metabolic pathways of pharmaceutically important metabolites from ginger, curcuma, chili peppers, melon or other food-related species with novel phenolics.

We need to include bystander first aid in trauma research.

PubMed

Bakke, Håkon Kvåle; Wisborg, Torben

2017-03-23

The chain of trauma survival is a concept that originated in the area of out-of-hospital cardiac arrest (OHCA) and was adapted to the treatment of trauma. In out-of-hospital cardiac arrest research into bystander first aid has resulted in improved outcome. Whereas, in trauma research the first link of the chain of survival is almost ignored. In OHCA, cardiopulmonary resuscitation (CPR) from bystanders has been subject of a vast amount of research, as well as measures and programs to raise the rate of bystander CPR to cardiac arrest victims. These efforts have resulted in improved survival. The research effort has been well grounded in the research community, as demonstrated by its natural inclusion in the uniform reporting template (Utstein) for the treatment of OHCA. In trauma the bystander may contribute by providing an open airway, staunch bleedings, or prevent hypothermia. In trauma however, while the chain of survival has been adopted along with it distinct links, including bystander first aid, the consensus-based uniform reporting template for trauma (the Utstein template) does not include the bystander first aid efforts. There is extremely little research on what first aid measures bystanders provide to trauma victims, and on what impact such measures have on outcome. An important step to improve research on bystander first aid in trauma would be to include this as part of the uniform reporting template for trauma CONCLUSION: The lack of research on bystander first aid makes the first link in the trauma chain of survival the weakest link. We, the trauma research community, should either improve our research and knowledge in this area, or remove the link from the chain of survival.

Impact of edge lines on safety of rural two-lane highways.

DOT National Transportation Integrated Search

2005-10-01

This report documents the results of the project for Impact of Edge Lines on Safety of Rural Two Lane Highways. This research project was initiated in the effort of compliance with the updated version of the Manual on Uniform Traffic Control De...

A Man of Principle.

ERIC Educational Resources Information Center

Perl, Peter

1998-01-01

Describes a dedicated principal who restored order and doubled enrollment at one troubled Washington, DC, elementary school. His efforts involved instilling a sense of stern discipline and an ethic of striving for excellence. He creates partnerships with local businesses and organizations, involves parents, requires uniforms, knows every child,…

Fabrication of uniformly dispersed Ag nanoparticles loaded TiO{sub 2} nanotube arrays for enhancing photoelectrochemical and photocatalytic performances under visible light irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yi, Junhui; Zhang, Shengsen; Wang, Hongjuan

2014-12-15

Graphical abstract: Uniformly dispersed Ag nanoparticles (NPs) were successfully loaded on both the outer and inner surface of the TiO{sub 2} nanotube arrays (NTs) through a simple polyol method, which exhibited the enhanced photoelectrochemical and photocatalytic performances under visible-light irradiation due to the more effective separation of photo-generated electron–hole pairs and faster interfacial charge transfer. - Highlights: • Highly dispersed Ag nanoparticles (NPs) are successfully prepared by polyol method. • Ag NPs are uniformly loaded on the surface of the TiO{sub 2} nanotube arrays (NTs). • Ag/TiO{sub 2}-NTs exhibit the enhanced photocatalytic activity under visible-light. • The enhanced photocurrent ismore » explained by electrochemical impedance spectroscopy. - Abstract: Uniformly dispersed Ag nanoparticles (NPs) were successfully loaded on both the outer and inner surface of the TiO{sub 2} nanotube arrays (NTs) through a simple polyol method. The as-prepared Ag/TiO{sub 2}-NTs were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and UV–vis diffusion reflectance spectroscopy. Photoelectrochemical behaviors were investigated via photocurrent response and electrochemical impedance spectroscopy (EIS). Photocatalytic activity of Ag/TiO{sub 2}-NTs was evaluated by degradation of acid orange II under visible light irradiation. The results showed that photocatalytic efficiency of Ag/TiO{sub 2}-NTs is more than 5 times higher than that of pure TiO{sub 2} NTs. Comparing with the electrochemical deposition method, the photocatalytic activity of Ag/TiO{sub 2}-NTs prepared by polyol method has been obviously increased.« less

A template-free method for stable CuO hollow microspheres fabricated from a metal organic framework (HKUST-1).

PubMed

Zhang, Suoying; Liu, Hong; Liu, Pengfei; Yang, Zhuhong; Feng, Xin; Huo, Fengwei; Lu, Xiaohua

2015-06-07

Uniform CuO hollow microspheres were successfully achieved from a non-uniform metal organic framework by using a template-free method. The process mechanism has been revealed to be spherical aggregation and Ostwald ripening. When tested in CO oxidation and heat treatment, these assembled microspheres exhibited an excellent catalytic performance and show a much better stability than the inherited hollow structure from MOFs.

Characteristics of Male and Female Students Who Experienced Success or Failure in Their First College Science Course.

ERIC Educational Resources Information Center

DeBoer, George E.

1985-01-01

Examined personality (persistence, future orientation, and the tendency toward reckless/rash behavior) and cognitive factors related to success or failure in college science courses. One finding noted is that both men and women were more apt to attribute their success to effort/ability, and their failure to the difficulty of a task. (JN)

75 FR 38959 - Uniform License Renewal, Discontinuance of Operations, and Geographic Partitioning and Spectrum...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-07

... Spectrum Disaggregation Rules and Policies for Certain Wireless Radio Services AGENCY: Federal..., geographic partitioning, and spectrum disaggregation for certain Wireless Radio Services in an effort to... Counsel, Mobility Division, Wireless Telecommunications Bureau, at (202) 418- 0920, or e-mail at Richard...

NASOPHARYNGEAL CONCENTRATIONS IN THE HUMAN VOLUNTEER BREATHING ACETONE

EPA Science Inventory

In an effort to examine the absorption of a common chemical into the nasopharyngeal region in humans, a 57 year old male volunteer inhaled uniformly labeled 13C-acetone at 1.4 ppm for 30 min while performing different breathing maneuvers; nose inhale, nose exhale (NINE); mouth ...

Assessing the Success of Postfire Reseeding in Semiarid Rangelands Using Terra MODIS

NASA Technical Reports Server (NTRS)

Chen, Fang; Weber, Keith T.; Scbnase, John L.

2012-01-01

Successful postfire reseeding efforts can aid rangeland ecosystem recovery by rapidly establishing a desired plant community and thereby reducing the likelihood of infestation by invasive plants. Although the success of postfire remediation is critical, few efforts have been made to leverage existing geospatial technologies to develop methodologies to assess reseeding success following a fire. In this study, Terra Moderate Resolution Imaging Spectroradiometer (MODIS) satellite data were used to improve the capacity to assess postfire reseeding rehabilitation efforts, with particular emphasis on the semiarid rangelands of Idaho. Analysis of MODIS data demonstrated a positive effect of reseeding on rangeland ecosystem recovery, as well as differences in vegetation between reseeded areas and burned areas where no reseeding had occurred (P,0.05). We conclude that MODIS provides useful data to assess the success of postfire reseeding.

Ignition of deuterium-trtium fuel targets

DOEpatents

Musinski, Donald L.; Mruzek, Michael T.

1991-01-01

A method of igniting a deuterium-tritium ICF fuel target to obtain fuel burn in which the fuel target initially includes a hollow spherical shell having a frozen layer of DT material at substantially uniform thickness and cryogenic temperature around the interior surface of the shell. The target is permitted to free-fall through a target chamber having walls heated by successive target ignitions, so that the target is uniformly heated during free-fall to at least partially melt the frozen fuel layer and form a liquid single-phase layer or a mixed liquid/solid bi-phase layer of substantially uniform thickness around the interior shell surface. The falling target is then illuminated from exteriorly of the chamber while the fuel layer is at substantially uniformly single or bi-phase so as to ignite the fuel layer and release energy therefrom.

Ignition of deuterium-tritium fuel targets

DOEpatents

Musinski, D.L.; Mruzek, M.T.

1991-08-27

Disclosed is a method of igniting a deuterium-tritium ICF fuel target to obtain fuel burn in which the fuel target initially includes a hollow spherical shell having a frozen layer of DT material at substantially uniform thickness and cryogenic temperature around the interior surface of the shell. The target is permitted to free-fall through a target chamber having walls heated by successive target ignitions, so that the target is uniformly heated during free-fall to at least partially melt the frozen fuel layer and form a liquid single-phase layer or a mixed liquid/solid bi-phase layer of substantially uniform thickness around the interior shell surface. The falling target is then illuminated from exteriorly of the chamber while the fuel layer is at substantially uniformly single or bi-phase so as to ignite the fuel layer and release energy therefrom. 5 figures.

Analysis method to determine and characterize the mask mean-to-target and uniformity specification

NASA Astrophysics Data System (ADS)

Lee, Sung-Woo; Leunissen, Leonardus H. A.; Van de Kerkhove, Jeroen; Philipsen, Vicky; Jonckheere, Rik; Lee, Suk-Joo; Woo, Sang-Gyun; Cho, Han-Ku; Moon, Joo-Tae

2006-06-01

The specification of the mask mean-to-target (MTT) and uniformity is related to functions as: mask error enhancement factor, dose sensitivity and critical dimension (CD) tolerances. The mask MTT shows a trade-off relationship with the uniformity. Simulations for the mask MTT and uniformity (M-U) are performed for LOGIC devices of 45 and 37 nm nodes according to mask type, illumination condition and illuminator polarization state. CD tolerances and after develop inspection (ADI) target CD's in the simulation are taken from the 2004 ITRS roadmap. The simulation results allow for much smaller tolerances in the uniformity and larger offsets in the MTT than the values as given in the ITRS table. Using the parameters in the ITRS table, the mask uniformity contributes to nearly 95% of total CDU budget for the 45 nm node, and is even larger than the CDU specification of the ITRS for the 37 nm node. We also compared the simulation requirements with the current mask making capabilities. The current mask manufacturing status of the mask uniformity is barely acceptable for the 45 nm node, but requires process improvements towards future nodes. In particular, for the 37 nm node, polarized illumination is necessary to meet the ITRS requirements. The current mask linearity deviates for pitches smaller than 300 nm, which is not acceptable even for the 45 nm node. More efforts on the proximity correction method are required to improve the linearity behavior.

ESR paper on structured reporting in radiology.

PubMed

2018-02-01

Structured reporting is emerging as a key element of optimising radiology's contribution to patient outcomes and ensuring the value of radiologists' work. It is being developed and supported by many national and international radiology societies, based on the recognised need to use uniform language and structure to accurately describe radiology findings. Standardisation of report structures ensures that all relevant areas are addressed. Standardisation of terminology prevents ambiguity in reports and facilitates comparability of reports. The use of key data elements and quantified parameters in structured reports ("radiomics") permits automatic functions (e.g. TNM staging), potential integration with other clinical parameters (e.g. laboratory results), data sharing (e.g. registries, biobanks) and data mining for research, teaching and other purposes. This article outlines the requirements for a successful structured reporting strategy (definition of content and structure, standard terminologies, tools and protocols). A potential implementation strategy is outlined. Moving from conventional prose reports to structured reporting is endorsed as a positive development, and must be an international effort, with international design and adoption of structured reporting templates that can be translated and adapted in local environments as needed. Industry involvement is key to success, based on international data standards and guidelines. • Standardisation of radiology report structure ensures completeness and comparability of reports. • Use of standardised language in reports minimises ambiguity. • Structured reporting facilitates automatic functions, integration with other clinical parameters and data sharing. • International and inter-society cooperation is key to developing successful structured report templates. • Integration with industry providers of radiology-reporting software is also crucial.

The Coverage of Human Evolution in High School Biology Textbooks in the 20th Century and in Current State Science Standards

ERIC Educational Resources Information Center

Skoog, Gerald

2005-01-01

Efforts to eliminate or neutralize the coverage of evolution in high school biology textbooks in the United States have persisted with varying degrees of intensity and success since the 1920s. In particular, the coverage of human evolution has been impacted by these efforts. Evidence of the success of these efforts can be chronicled by the…

Medium and High Altitude Unmanned Aircraft System Acquisition: An Efficiency Study of Magnitude and Capability

DTIC Science & Technology

2009-06-12

these past efforts, DOD recognized the incredible potential that medium and high altitude UAS held for all uniformed services. A pilotless aircraft...from aircraft, ships, missiles, automobiles and related military support equipment. 30 RDT&E: Research, Development, Test and Evaluation pay for

Goals for Teacher Learning about Energy Degradation and Usefulness

ERIC Educational Resources Information Center

Daane, Abigail R.; Vokos, Stamatis; Scherr, Rachel E.

2014-01-01

The Next Generation Science Standards (NGSS) require teachers to understand aspects of energy degradation and the second law of thermodynamics, including energy's availability and usefulness, changes in energy concentration, and the tendency of energy to spread uniformly. In an effort to develop learning goals that support teachers in building…

Gravity-oriented microfluidic device for uniform and massive cell spheroid formation

PubMed Central

Lee, Kangsun; Kim, Choong; Young Yang, Jae; Lee, Hun; Ahn, Byungwook; Xu, Linfeng; Yoon Kang, Ji; Oh, Kwang W.

2012-01-01

We propose a simple method for forming massive and uniform three-dimensional (3-D) cell spheroids in a multi-level structured microfluidic device by gravitational force. The concept of orienting the device vertically has allowed spheroid formation, long-term perfusion, and retrieval of the cultured spheroids by user-friendly standard pipetting. We have successfully formed, perfused, and retrieved uniform, size-controllable, well-conditioned spheroids of human embryonic kidney 293 cells (HEK 293) in the gravity-oriented microfluidic device. We expect the proposed method will be a useful tool to study in-vitro 3-D cell models for the proliferation, differentiation, and metabolism of embryoid bodies or tumours. PMID:22662098

Comparison of local grid refinement methods for MODFLOW

USGS Publications Warehouse

Mehl, S.; Hill, M.C.; Leake, S.A.

2006-01-01

Many ground water modeling efforts use a finite-difference method to solve the ground water flow equation, and many of these models require a relatively fine-grid discretization to accurately represent the selected process in limited areas of interest. Use of a fine grid over the entire domain can be computationally prohibitive; using a variably spaced grid can lead to cells with a large aspect ratio and refinement in areas where detail is not needed. One solution is to use local-grid refinement (LGR) whereby the grid is only refined in the area of interest. This work reviews some LGR methods and identifies advantages and drawbacks in test cases using MODFLOW-2000. The first test case is two dimensional and heterogeneous; the second is three dimensional and includes interaction with a meandering river. Results include simulations using a uniform fine grid, a variably spaced grid, a traditional method of LGR without feedback, and a new shared node method with feedback. Discrepancies from the solution obtained with the uniform fine grid are investigated. For the models tested, the traditional one-way coupled approaches produced discrepancies in head up to 6.8% and discrepancies in cell-to-cell fluxes up to 7.1%, while the new method has head and cell-to-cell flux discrepancies of 0.089% and 0.14%, respectively. Additional results highlight the accuracy, flexibility, and CPU time trade-off of these methods and demonstrate how the new method can be successfully implemented to model surface water-ground water interactions. Copyright ?? 2006 The Author(s).

Transmural gradients of myocardial structure and mechanics: Implications for fiber stress and strain in pressure overload.

PubMed

Carruth, Eric D; McCulloch, Andrew D; Omens, Jeffrey H

2016-12-01

Although a truly complete understanding of whole heart activation, contraction, and deformation is well beyond our current reach, a significant amount of effort has been devoted to discovering and understanding the mechanisms by which myocardial structure determines cardiac function to better treat patients with cardiac disease. Several experimental studies have shown that transmural fiber strain is relatively uniform in both diastole and systole, in contrast to predictions from traditional mechanical theory. Similarly, mathematical models have largely predicted uniform fiber stress across the wall. The development of this uniform pattern of fiber stress and strain during filling and ejection is due to heterogeneous transmural distributions of several myocardial structures. This review summarizes these transmural gradients, their contributions to fiber mechanics, and the potential functional effects of their remodeling during pressure overload hypertrophy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Design of exploration and minerals-data-collection programs in developing areas

USGS Publications Warehouse

Attanasi, E.D.

1981-01-01

This paper considers the practical problem of applying economic analysis to designing minerals exploration and data collection strategies for developing countries. Formal decision rules for the design of government exploration and minerals-data-collection programs are derived by using a minerals-industry planning model that has been extended to include an exploration function. Rules derived are applicable to centrally planned minerals industries as well as market-oriented minerals sectors. They pertain to the spatial allocation of exploration effort and to the allocation of activities between government and private concerns for market-oriented economies. Programs characterized by uniform expenditures, uniform information coverage across regions, or uniform-density grid drilling progrmas are shown to be inferior to the strategy derived. Moreover, for market-oriented economies, the economically optimal mix in exploration activities between private and government data collection would require that only private firms assess local sites and that government agencies carry out regional surveys. ?? 1981.

An improved algorithm for de-striping of ocean colour monitor imageries aided by measured sensor characteristics

NASA Astrophysics Data System (ADS)

Dutt, Ashutosh; Mishra, Ashish; Goswami, D. R.; Kumar, A. S. Kiran

2016-05-01

The push-broom sensors in bands meant to study oceans, in general suffer from residual non uniformity even after radiometric correction. The in-orbit data from OCM-2 shows pronounced striping in lower bands. There have been many attempts and different approaches to solve the problem using image data itself. The success or lack of it of each algorithm lies on the quality of the uniform region identified. In this paper, an image based destriping algorithm is presented with constraints being derived from Ground Calibration exercise. The basis of the methodology is determination of pixel to pixel non-uniformity through uniform segments identified and collected from large number of images, covering the dynamic range of the sensor. The results show the effectiveness of the algorithm over different targets. The performance is qualitatively evaluated by visual inspection and quantitatively measured by two parameters.

A new splitting scheme to the discrete Boltzmann equation for non-ideal gases on non-uniform meshes

NASA Astrophysics Data System (ADS)

Patel, Saumil; Lee, Taehun

2016-12-01

We present a novel numerical procedure for solving the discrete Boltzmann equations (DBE) on non-uniform meshes. Our scheme is based on the Strang splitting method where we seek to investigate two-phase flow applications. In this note, we investigate the onset of parasitic currents which arise in many computational two-phase algorithms. To the best of our knowledge, the results presented in this work show, for the first time, a spectral element discontinuous Galerkin (SEDG) discretization of a discrete Boltzmann equation which successfully eliminates parasitic currents on non-uniform meshes. With the hope that this technique can be used for applications in complex geometries, calculations are performed on non-uniform mesh distributions by using high-order (spectral), body-fitting quadrilateral elements. Validation and verification of our work is carried out by comparing results against the classical 2D Young-Laplace law problem for a static drop.

Effect of failure/success feedback and the moderating influence of personality on reward motivation.

PubMed

Anand, Deepika; Oehlberg, Katherine A; Treadway, Michael T; Nusslock, Robin

2016-01-01

While motivation to pursue goals is often assumed to be a trait-like characteristic, it is influenced by a variety of situational factors. In particular, recent experiences of success or failure, as well as cognitive responses to these outcomes, may shape subsequent willingness to expend effort for future rewards. To date, however, these effects have not been explicitly tested. In the present study, 131 healthy individuals received either failure or success feedback on a cognitive task. They were then instructed to either ruminate or distract themselves from their emotions. Finally, they completed the Effort Expenditure for Rewards Task, a laboratory measure of reward motivation. Results indicate that participants who received failure feedback relied more strongly on the reward magnitude when choosing whether to exert greater effort to obtain larger rewards, though this effect only held under conditions of significant uncertainty about whether the effort would be rewarded. Further, participants with high levels of trait inhibition were less responsive to reward value and probability when choosing whether to expend greater effort, results that echo past studies of effort-based decision-making in psychological disorders.

Critically evaluated/distributed database of IRAS LRS spectra

NASA Technical Reports Server (NTRS)

Stencel, R. E.

1993-01-01

Accomplishments under this grant effort include: successful scientific utilization of the IRAS Low Resolution Spectrometer (LRS) database of over 150,000 scans of 7-23 micron spectra for over 50,000 celestial sources; publication in refereed journal of an additional 486 critically evaluated spectra of sources brighter than 20 Jy, completing the LRS ATLAS (Olnon and Raimond 1986 A&A) uniformly to that level, and production of an additional 1,830 critically evaluated spectra of sources brighter than 10 Jy; creation and maintenance of on-line, remotely accessible LRS spectra of over 7500 sources; cooperation with Astrophysics Data System personnel for transitioning this LRS database to the ADS access system after funding for this project expires; and publication of research highlights, which include a systematic variation of the shapes of LRS silicate features among stars of differing IRAS broad-band colors, maser characteristics and light curve asymmetries, all correlated with the chemical and physical development and processing of solid phase materials, and preliminary evidence for silicate profile variations in individual stars as a function of visual light curve phase.

Maternal Health Situation in India: A Case Study

PubMed Central

Mavalankar, Dileep V.; Ramani, K.V.; Upadhyaya, Mudita; Sharma, Bharati; Iyengar, Sharad; Gupta, Vikram; Iyengar, Kirti

2009-01-01

Since the beginning of the Safe Motherhood Initiative, India has accounted for at least a quarter of maternal deaths reported globally. India's goal is to lower maternal mortality to less than 100 per 100,000 livebirths but that is still far away despite its programmatic efforts and rapid economic progress over the past two decades. Geographical vastness and sociocultural diversity mean that maternal mortality varies across the states, and uniform implementation of health-sector reforms is not possible. The case study analyzes the trends in maternal mortality nationally, the maternal healthcare-delivery system at different levels, and the implementation of national maternal health programmes, including recent innovative strategies. It identifies the causes for limited success in improving maternal health and suggests measures to rectify them. It recommends better reporting of maternal deaths and implementation of evidence-based, focused strategies along with effective monitoring for rapid progress. It also stresses the need for regulation of the private sector and encourages further public-private partnerships and policies, along with a strong political will and improved management capacity for improving maternal health. PMID:19489415

Nationwide Benthic Macroinvertebrate Assemblage Multimetric Indices: Identifying Inconsistencies and Limitations in Reporting Stream Impairment Status, USA

NASA Astrophysics Data System (ADS)

Lau, J. K.; Lauer, T. E.

2015-07-01

The objective of this study was to identify the current status of stream water-quality assessment and reporting methods for four states in the Ohio River basin (Indiana, Ohio, Tennessee, and Virginia), as required by the 305(b) section of the United States (US) Clean Water Act. Specifically, we clarified the discrepancies that exist among stream-impairment status classified by benthic macroinvertebrate multimetric indices (MMIs) and depicted using Geographic Information Systems shapefiles. In addition, we provided guidance in solving some of the comparability problems that arise when developing state-specific MMIs and depicting stream-impairment status using Geographic Information Systems technology. The MMI variation among states and differences in shapefile formats resulted in a nationwide dataset, which cannot be directly compared. Incorporating the changes suggested in this study allow for a uniform assessment and reporting method nationwide. Successful implementation of these changes would strengthen the US Environmental Protection Agency efforts to identify impaired streams and sources of those impairments without the limitations of state-by-state .developed assessment methods.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koniges, A.E.; Craddock, G.G.; Schnack, D.D.

The purpose of the workshop was to assemble workers, both within and outside of the fusion-related computations areas, for discussion regarding the issues of dynamically adaptive gridding. There were three invited talks related to adaptive gridding application experiences in various related fields of computational fluid dynamics (CFD), and nine short talks reporting on the progress of adaptive techniques in the specific areas of scrape-off-layer (SOL) modeling and magnetohydrodynamic (MHD) stability. Adaptive mesh methods have been successful in a number of diverse fields of CFD for over a decade. The method involves dynamic refinement of computed field profiles in a waymore » that disperses uniformly the numerical errors associated with discrete approximations. Because the process optimizes computational effort, adaptive mesh methods can be used to study otherwise the intractable physical problems that involve complex boundary shapes or multiple spatial/temporal scales. Recent results indicate that these adaptive techniques will be required for tokamak fluid-based simulations involving the diverted tokamak SOL modeling and MHD simulations problems related to the highest priority ITER relevant issues.Individual papers are indexed separately on the energy data bases.« less

Plant Secondary Metabolites as Rodent Repellents: a Systematic Review.

PubMed

Hansen, Sabine C; Stolter, Caroline; Imholt, Christian; Jacob, Jens

2016-09-01

The vast number of plant secondary metabolites (PSMs) produced by higher plants has generated many efforts to exploit their potential for pest control. We performed a systematic literature search to retrieve relevant publications, and we evaluated these according to PSM groups to derive information about the potential for developing plant-derived rodent repellents. We screened a total of 54 publications where different compounds or plants were tested regarding rodent behavior/metabolism. In the search for widely applicable products, we recommend multi-species systematic screening of PSMs, especially from the essential oil and terpenoid group, as laboratory experiments have uniformly shown the strongest effects across species. Other groups of compounds might be more suitable for the management of species-specific or sex-specific issues, as the effects of some compounds on particular rodent target species or sex might not be present in non-target species or in both sexes. Although plant metabolites have potential as a tool for ecologically-based rodent management, this review demonstrates inconsistent success across laboratory, enclosure, and field studies, which ultimately has lead to a small number of currently registered PSM-based rodent repellents.

Tailoring biocontrol to maximize top-down effects: on the importance of underlying site fertility.

PubMed

Hovick, Stephen M; Carson, Walter P

2015-01-01

The degree to which biocontrol agents impact invasive plants varies widely across landscapes, often for unknown reasons. Understanding this variability can help optimize invasive species management while also informing our understanding of trophic linkages. To address these issues, we tested three hypotheses with contrasting predictions regarding the likelihood of biocontrol success. (1) The biocontrol effort hypothesis: invasive populations are regulated primarily by top-down effects, predicting that increased biocontrol efforts alone (e.g., more individuals of a given biocontrol agent or more time since agent release) will enhance biocontrol success. (2) The relative fertility hypothesis: invasive populations are regulated primarily by bottom-up effects, predicting that nutrient enrichment will increase dominance by invasives and thus reduce biocontrol success, regardless of biocontrol efforts. (3) The fertility-dependent biocontrol effort hypothesis: top-down effects will only regulate invasive populations if bottom-up effects are weak. It predicts that greater biocontrol efforts will increase biocontrol success, but only in low-nutrient sites. To test these hypotheses, we surveyed 46 sites across three states with prior releases of Galerucella beetles, the most common biocontrol agents used against invasive purple loosestrife (Lythrum salicaria). We found strong support for the fertility-dependent biocontrol effort hypothesis, as biocontrol success occurred most often with greater biocontrol efforts, but only in low-fertility sites. This result held for early stage metrics of biocontrol success (higher Galerucella abundance) and ultimate biocontrol outcomes (decreased loosestrife plant size and abundance). Presence of the invasive grass Phalaris arundinacea was also inversely related to loosestrife abundance, suggesting that biocontrol-based reductions in loosestrife made secondary invasion by P. arundinacea more likely. Our data suggest that low-nutrient sites be prioritized for loosestrife biocontrol and that future monitoring account for variation in site fertility or work to mitigate it. We introduce a new framework that integrates our findings with conflicting patterns previously reported from other biocontrol systems, proposing a unimodal relationship whereby nutrient availability enhances biocontrol success in low-nutrient sites but hampers it in high-nutrient sites. Our results represent one of the first examples of biocontrol success depending on site fertility, which has the potential to inform biocontrol-based management decisions across entire regions and among contrasting systems.

Control of Reaction Kinetics During Friction Stir Processing

DOE PAGES

Das, Shamiparna; Martinez, Nelson Y.; Mishra, Rajiv S.; ...

2017-02-17

Friction stir processing (FSP) was used to successfully embed galfenol particles into aluminum (AA 1100 Al) matrix uniformly. But, intermetallic layer of Al 3Fe was formed around the galfenol particles. We estimated the activation energy for Al 3Fe formation during FSP, and attempts were made to minimize the Al 3Fe layer thickness. By changing the processing conditions, FSP successfully eliminated the intermetallic layer. Therefore, FSP, in addition to microstructural control, can successfully fabricate intermetallic-free embedded regions by controlling the reaction kinetics.

Evaluation of the technical feasibility and effective cost of various wafer thicknesses for the manufacture of solar cells

NASA Technical Reports Server (NTRS)

1978-01-01

Three wafering demonstration runs were completed on the Yasunaga wire saw. Wafer thickness/taper uniformity is excellent. Many small problems were encountered with Yasunaga accessories, slowing the effort. A wafer characterization cycle was defined and will be initiated during the next period.

Florida's Class Size Amendment and Co-Teaching: An Uneasy Partnership

ERIC Educational Resources Information Center

Sutton, Lenford C.; Jones, Phyllis; White, Julia

2008-01-01

For nearly four decades, school finance has become progressively more central in school reform efforts aimed at improving student performance. At the same time, the focus of many school business officials and policymakers has turned to efficient uses of current resources in lieu of uniform increases in school funding. With regard to improving…

76 FR 589 - Proposed Extension of Existing Information Collection; Mine Accident, Injury, Illness, Mine...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... safety efforts of MSHA and the mining industry. Accident, injury, and illness data, when correlated with... requested data can be provided in the desired format, reporting burden (time and financial resources) is... provides for uniform information gathering across the mining industry. Section 50.30 requires mine...

Investigation of the bacterial retting community of kenaf (Hibiscus cannabinus) under different conditions using next-generation semiconductor sequencing

USDA-ARS?s Scientific Manuscript database

The use of the natural fibers requires the development of cost-efficient processing of fibers with consistent, uniform properties. The microbial communities associated with kenaf (Hibiscus cannabinus) plant fibers during retting were determined in an effort to identify possible means of accelerating...

Profiles of the National Industry Skills Standards Projects.

ERIC Educational Resources Information Center

Rahn, Mikala L., Comp.

In an effort to develop a more uniform and comprehensive system of national skill standards, the U.S. Departments of Education and Labor have awarded grants to 22 technical committees, composed of representatives from business, labor, and education, in a variety of industries and occupations. These projects will begin proposing national standards…

Freeform lens generation for quasi-far-field successive illumination targets

NASA Astrophysics Data System (ADS)

Zhuang, Zhenfeng; Thibault, Simon

2018-07-01

A predefined mapping to tailor one or more freeform surfaces is employed to build a freeform illumination system. The emergent rays from the light source corresponding to the prescribed target mesh for a pre-determined lighting distance are mapped by a point-to-point algorithm with respect to the freeform optics, which involves limiting design flexibility. To tackle the problem of design limitation and find the optimum design results, a freeform lens is exploited to produce the desired rectangular illumination distribution at successive target planes at quasi-far-field lighting distances. It is generated using numerical solutions to find out an initial starting point, and an appropriate approach to obtain variables for parameterization of the freeform surface is introduced. The relative standard deviation, which is a useful figure of merit for the analysis, is set up as merit function with respect to illumination non-uniformity at the successive sampled target planes. Therefore, the irradiance distribution in terms of the specific lighting distance range can be ensured by the proposed scheme. A design example of a freeform illumination system, composed of a spherical surface and a freeform surface, is given to produce desired irradiance distribution within the lighting distance range. An optical performance with low non-uniformity and high efficiency is achieved. Compared with the conventional approach, the uniformity of the sampled targets is dramatically enhanced; meanwhile, a design result with a large tolerance of LED size is offered.

Best Practices in Documenting Workforce Success of College Graduates: Final Report

ERIC Educational Resources Information Center

Lessne, Deborah S.

2004-01-01

This report documents the Connecticut Department of Higher Education's efforts to investigate and document best practices in assessing student achievement as measured by workforce success. That effort is part of a five-state project to Define Best Practices for Responsible Accountability Models in Higher Education funded by a U.S. Department of…

Understanding Succession Planning and Management Efforts at Midwestern University: A Mixed Methods Study

ERIC Educational Resources Information Center

Mateso, Peter E. E.

2010-01-01

The purpose of this concurrent triangulation mixed methods study was to understand the status of succession planning and management (SPM) efforts of the subject university as perceived by the fulltime academic and fulltime administrative staff. Four research questions guided this study: (1) how do fulltime academic staff and fulltime…

An accurate binding interaction model in de novo computational protein design of interactions: if you build it, they will bind.

PubMed

London, Nir; Ambroggio, Xavier

2014-02-01

Computational protein design efforts aim to create novel proteins and functions in an automated manner and, in the process, these efforts shed light on the factors shaping natural proteins. The focus of these efforts has progressed from the interior of proteins to their surface and the design of functions, such as binding or catalysis. Here we examine progress in the development of robust methods for the computational design of non-natural interactions between proteins and molecular targets such as other proteins or small molecules. This problem is referred to as the de novo computational design of interactions. Recent successful efforts in de novo enzyme design and the de novo design of protein-protein interactions open a path towards solving this problem. We examine the common themes in these efforts, and review recent studies aimed at understanding the nature of successes and failures in the de novo computational design of interactions. While several approaches culminated in success, the use of a well-defined structural model for a specific binding interaction in particular has emerged as a key strategy for a successful design, and is therefore reviewed with special consideration. Copyright © 2013 Elsevier Inc. All rights reserved.

Effort, success, and nonuse determine arm choice

PubMed Central

Xiao, Yupeng; Kim, Sujin; Yoshioka, Toshinori; Gordon, James; Osu, Rieko

2015-01-01

How do humans choose one arm or the other to reach single targets in front of the body? Current theories of reward-driven decisionmaking predict that choice results from a comparison of “action values,” which are the expected rewards for possible actions in a given state. In addition, current theories of motor control predict that in planning arm movements, humans minimize an expected motor cost that balances motor effort and endpoint accuracy. Here, we test the hypotheses that arm choice is determined by comparison of action values comprising expected effort and expected task success for each arm, as well as a handedness bias. Right-handed subjects, in either a large or small target condition, were first instructed to use each hand in turn to shoot through an array of targets and then to choose either hand to shoot through the same targets. Effort was estimated via inverse kinematics and dynamics. A mixed-effects logistic-regression analysis showed that, as predicted, both expected effort and expected success predicted choice, as did arm use in the preceding trial. Finally, individual parameter estimation showed that the handedness bias correlated with mean difference between right- and left-arm success, leading to overall lower use of the left arm. We discuss our results in light of arm nonuse in individuals' poststroke. PMID:25948869

Collaboration and Team Science: From Theory to Practice

PubMed Central

Gadlin, Howard

2013-01-01

Interdisciplinary efforts are becoming more critical for scientific discovery and translational research efforts. Highly integrated and interactive research teams share a number of features that contribute to their success in developing and sustaining their efforts over time. Through analysis of in-depth interviews with members of highly successful research teams and others that did not meet their goals or ended due to conflicts, we identified key elements that appear critical for team success and effectiveness. There is no debate that the scientific goal sits at the center of the collaborative effort. However, supporting features need to be in place to avoid the derailment of the team. Among the most important of these is trust: without trust the team dynamic runs the risk of deteriorating over time. Other critical factors of which both leaders and participants need to be aware include developing a shared vision, strategically identifying team members and purposefully building the team, promoting disagreement while containing conflict, and setting clear expectations for sharing credit and authorship. Self-awareness and strong communication skills contribute greatly to effective leadership and management strategies of scientific teams. While all successful teams share the characteristic of effectively carrying out these activities, there is no single formula for execution with every leader exemplifying different strengths and weaknesses. Successful scientific collaborations have strong leaders who are self -aware and are mindful of the many elements critical for supporting the science at the center of the effort. PMID:22525233

Measuring collections effort improves cash performance.

PubMed

Shutts, Joe

2009-09-01

Having a satisfied work force can lead to an improved collections effort. Hiring the right people and training them ensures employee engagement. Measuring collections effort and offering incentives is key to revenue cycle success.

Functional-anatomic study of episodic retrieval using fMRI. I. Retrieval effort versus retrieval success.

PubMed

Buckner, R L; Koutstaal, W; Schacter, D L; Wagner, A D; Rosen, B R

1998-04-01

A number of recent functional imaging studies have identified brain areas activated during tasks involving episodic memory retrieval. The identification of such areas provides a foundation for targeted hypotheses regarding the more specific contributions that these areas make to episodic retrieval. As a beginning effort toward such an endeavor, whole-brain functional magnetic resonance imaging (fMRI) was used to examine 14 subjects during episodic word recognition in a block-designed fMRI experiment. Study conditions were manipulated by presenting either shallow or deep encoding tasks. This manipulation yielded two recognition conditions that differed with regard to retrieval effort and retrieval success: shallow encoding yielded low levels of recognition success with high levels of retrieval effort, and deep encoding yielded high levels of recognition success with low levels of effort. Many brain areas were activated in common by these two recognition conditions compared to a low-level fixation condition, including left and right prefrontal regions often detected during PET episodic retrieval paradigms (e.g., R. L. Buckner et al., 1996, J. Neurosci. 16, 6219-6235) thereby generalizing these findings to fMRI. Characterization of the activated regions in relation to the separate recognition conditions showed (1) bilateral anterior insular regions and a left dorsal prefrontal region were more active after shallow encoding, when retrieval demanded greatest effort, and (2) right anterior prefrontal cortex, which has been implicated in episodic retrieval, was most active during successful retrieval after deep encoding. We discuss these findings in relation to component processes involved in episodic retrieval and in the context of a companion study using event-related fMRI.

Gastroenterologist: What Is a Gastroenterologist?

MedlinePlus

... overseen by national societies committed to ensuring high quality and uniform education. These groups include the American Board of Internal Medicine, the American College of Gastroenterology, the American ... quality training. Once fellows successfully complete their training they ...

The effects of non-uniform environmental conditions on piglet crushing and maternal behavior of sows

USDA-ARS?s Scientific Manuscript database

Crushing is one of the main causes of piglet death in swine farrowing systems. Studies have shown a wide variability of piglet mortality rate among distinct litters, which has been associated with maternal ability of sows. In an effort to understand factors that affect sow maternal ability, this stu...

Prevent: A Fragmented Counter-Terrorism Strategy

DTIC Science & Technology

2015-05-21

Seminar Leader David M. Wood , COL...David M. Wood for the guidance and support during this process. The learning curve has been steep but worthwhile and your efforts have made the...Mirror Online, “Muslim Worshippers: It’s Madness; Exclusive Army To Scots Cadets: Don’t Wear Uniform near Mosque in Case You Offend,” Muslims, accessed

History of residency selection issues in podiatric medicine.

PubMed

Dorcey, E U; Tinkleman, A R

1996-08-01

Issues related to residency interview and selection processes have concerned the podiatric medical profession for nearly 20 years. This article presents a chronology and summary of efforts undertaken to address these problems, including a discussion of legal ramifications of residency approval requirements related to establishment of a uniform notification date and participation in a resident-matching service.

NAEP Scores Put Spotlight on Standards: Flat Math Results Also Spur Calls for Teaching Reforms

ERIC Educational Resources Information Center

Cavanagh, Sean

2009-01-01

Fourth grade math scores stagnated for the first time in two decades on a prominent nationwide test, prompting calls for new efforts to improve teacher content knowledge and stirring discussion of the potential benefits of setting more-uniform academic standards across states. The results on the National Assessment of Educational Progress,…

Reacting to Poverty: A Comparative Analysis of Schools in Brazilian Deprived Areas

ERIC Educational Resources Information Center

Tarabini, Aina; Bonal, Xavier; Valiente, Oscar

2014-01-01

Schools in the most deprived areas in Brazil are marked by extreme poverty, a situation that has obvious consequences for the everyday life in schools and for efforts to develop a supportive culture of schooling. Nevertheless, schools' responses to poverty are far from uniform. Although the context of poverty generally determines what is possible…

Student Response to Grading Incentives: Evidence from College Economics Courses

ERIC Educational Resources Information Center

Chulkov, Dmitriy V.

2006-01-01

This paper aims to provide evidence on the response of various student types to the use of simple grading incentives. The results show that while the majority of students expend the effort to complete an assignment for credit, this response is not uniform. Using data from six semesters of college Economics classes, the study demonstrates that…

Sexual Harassment Solutions at Work. Profiles of Successful Policy and Practice.

ERIC Educational Resources Information Center

Phelan, Colleen

This publication profiles the successful efforts of eight organizations to develop programs and policies to prevent sexual harassment in their workplaces. The profiles highlight a facet of each organization's efforts. An introduction offers a blueprint for action. The first profile is a look at US West and the key elements for developing and…

A Case Study of School Technology Support Networks

ERIC Educational Resources Information Center

Hiltz, John R.

2011-01-01

Since the last decade of the 20th Century, there has been an effort to integrate technology into classroom instruction. The success of this effort has been uneven, as teachers have resisted this change. There has been a great deal of recent research on the importance of teacher-to-teacher interactions and successful organizational change. This…

Attributional Gender Bias: Teachers' Ability and Effort Explanations for Students' Math Performance

ERIC Educational Resources Information Center

Espinoza, Penelope; Arêas da Luz Fontes, Ana B.; Arms-Chavez, Clarissa J.

2014-01-01

Research is presented on the attributional gender bias: the tendency to generate different attributions (explanations) for female versus male students' performance in math. Whereas boys' successes in math are attributed to ability, girls' successes are attributed to effort; conversely, boys' failures in math are attributed to a…

Facile Fabrication of Uniform Polyaniline Nanotubes with Tubular Aluminosilicates as Templates

PubMed Central

2008-01-01

The uniform polyaniline (PANI) nanotubes, with inner diameter, outer diameter, and tubular thickness of 40, 60, and 10 nm, respectively, were prepared successfully by using natural tubular aluminosilicates as templates. The halloysite nanotubes were coated with PANI via the in situ chemical oxidation polymerization. Then the templates were etched with HCl/HF solution. The PANI nanotubes were characterized using FTIR, X-ray diffraction, and transmission electron microscopy. The conductivity of the PANI nanotubes was found to be 1.752 × 10−5(Ω·cm)−1.

Facile Fabrication of Uniform Polyaniline Nanotubes with Tubular Aluminosilicates as Templates

NASA Astrophysics Data System (ADS)

Zhang, Long; Liu, Peng

2008-08-01

The uniform polyaniline (PANI) nanotubes, with inner diameter, outer diameter, and tubular thickness of 40, 60, and 10 nm, respectively, were prepared successfully by using natural tubular aluminosilicates as templates. The halloysite nanotubes were coated with PANI via the in situ chemical oxidation polymerization. Then the templates were etched with HCl/HF solution. The PANI nanotubes were characterized using FTIR, X-ray diffraction, and transmission electron microscopy. The conductivity of the PANI nanotubes was found to be 1.752 × 10-5 (Ω·cm)-1.

Electronic-beam analysis of excimer lasers used for photorefractive keratotomy

NASA Astrophysics Data System (ADS)

Roundy, Carlos B.

1998-07-01

Excimer lasers are an excellent instrument for performing photorefractive keratotomy, PRK. The UV light from the laser causes an ablation of the cornea in proportion to the intensity of the light. The primary characteristic essential to successful PRK is the uniformity of the Top Hat, or working portion of the laser beam. In order for this intensity profile to be sufficiently uniform for PRK, it is essential to periodically measure the equality of the laser beam profile. This ensures that the laser continues to operate properly and provide the expected performance.

Current Density Measurements of an Annular-Geometry Ion Engine

NASA Technical Reports Server (NTRS)

Shastry, Rohit; Patterson, Michael J.; Herman, Daniel A.; Foster, John E.

2012-01-01

The concept of the annular-geometry ion engine, or AGI-Engine, has been shown to have many potential benefits when scaling electric propulsion technologies to higher power. However, the necessary asymmetric location of the discharge cathode away from thruster centerline could potentially lead to non-uniformities in the discharge not present in conventional geometry ion thrusters. In an effort to characterize the degree of this potential non-uniformity, a number of current density measurements were taken on a breadboard AGI-Engine. Fourteen button probes were used to measure the ion current density of the discharge along a perforated electrode that replaced the ion optics during conditions of simulated beam extraction. Three Faraday probes spaced apart in the vertical direction were also used in a separate test to interrogate the plume of the AGI-Engine during true beam extraction. It was determined that both the discharge and the plume of the AGI-Engine are highly uniform, with variations under most conditions limited to +/-10% of the average current density in the discharge and +/-5% of the average current density in the plume. Beam flatness parameter measured 30 mm from the ion optics ranged from 0.85 - 0.95, and overall uniformity was shown to generally increase with increasing discharge and beam currents. These measurements indicate that the plasma is highly uniform despite the asymmetric location of the discharge cathode.

A Correlation Between the Characteristics of Candidates and Performance on the Uniform CPA Examination.

ERIC Educational Resources Information Center

Zook, Donald R.; Bremser, Wayne G.

1982-01-01

This study examined the relationship between successful performance on the auditing, theory, and practice parts of the certified public accountant examination and selected characteristics possessed by CPA candidates. (Author/CT)

Removal of 10-nm contaminant particles from Si wafers using CO2 bullet particles.

PubMed

Kim, Inho; Hwang, Kwangseok; Lee, Jinwon

2012-04-11

Removal of nanometer-sized contaminant particles (CPs) from substrates is essential in successful fabrication of nanoscale devices. The particle beam technique that uses nanometer-sized bullet particles (BPs) moving at supersonic velocity was improved by operating it at room temperature to achieve higher velocity and size uniformity of BPs and was successfully used to remove CPs as small as 10 nm. CO2 BPs were generated by gas-phase nucleation and growth in a supersonic nozzle; appropriate size and velocity of the BPs were obtained by optimizing the nozzle contours and CO2/He mixture fraction. Cleaning efficiency greater than 95% was attained. BP velocity was the most important parameter affecting removal of CPs in the 10-nm size range. Compared to cryogenic Ar or N2 particles, CO2 BPs were more uniform in size and had higher velocity and, therefore, cleaned CPs more effectively.

Controllable Fabrication and Optical Properties of Uniform Gadolinium Oxysulfate Hollow Spheres

PubMed Central

Chen, Fashen; Chen, Gen; Liu, Tao; Zhang, Ning; Liu, Xiaohe; Luo, Hongmei; Li, Junhui; Chen, Limiao; Ma, Renzhi; Qiu, Guanzhou

2015-01-01

Uniform gadolinium oxysulfate (Gd2O2SO4) hollow spheres were successfully fabricated by calcination of corresponding Gd-organic precursor obtained via a facile hydrothermal process. The Gd2O2SO4 hollow spheres have a mean diameter of approximately 550 nm and shell thickness in the range of 30–70 nm. The sizes and morphologies of as-prepared Gd2O2SO4 hollow spheres could be deliberately controlled by adjusting the experimental parameters. Eu-doped Gd2O2SO4 hollow spheres have also been prepared for the property modification and practical applications. The structure, morphology, and properties of as-prepared products were characterized by XRD, TEM, HRTEM, SEM and fluorescence spectrophotometer. Excited with ultraviolet (UV) pump laser, successful downconversion (DC) could be achieved for Eu-doped Gd2O2SO4 hollow spheres. PMID:26671661

Single-walled carbon nanotubes coated with ZnO by atomic layer deposition

NASA Astrophysics Data System (ADS)

Pal, Partha P.; Gilshteyn, Evgenia; Jiang, Hua; Timmermans, Marina; Kaskela, Antti; Tolochko, Oleg V.; Kurochkin, Alexey V.; Karppinen, Maarit; Nisula, Mikko; Kauppinen, Esko I.; Nasibulin, Albert G.

2016-12-01

The possibility of ZnO deposition on the surface of single-walled carbon nanotubes (SWCNTs) with the help of an atomic layer deposition (ALD) technique was successfully demonstrated. The utilization of pristine SWCNTs as a support resulted in a non-uniform deposition of ZnO in the form of nanoparticles. To achieve uniform ZnO coating, the SWCNTs first needed to be functionalized by treating the samples in a controlled ozone atmosphere. The uniformly ZnO coated SWCNTs were used to fabricate UV sensing devices. An UV irradiation of the ZnO coated samples turned them from hydrophobic to hydrophilic behaviour. Furthermore, thin films of the ZnO coated SWCNTs allowed us switch p-type field effect transistors made of pristine SWCNTs to have ambipolar characteristics.

Single-walled carbon nanotubes coated with ZnO by atomic layer deposition.

PubMed

Pal, Partha P; Gilshteyn, Evgenia; Jiang, Hua; Timmermans, Marina; Kaskela, Antti; Tolochko, Oleg V; Karppinen, Maarit; Nisula, Mikko; Kauppinen, Esko I; Nasibulin, Albert G

2016-12-02

The possibility of ZnO deposition on the surface of single-walled carbon nanotubes (SWCNTs) with the help of an atomic layer deposition (ALD) technique was successfully demonstrated. The utilization of pristine SWCNTs as a support resulted in a non-uniform deposition of ZnO in the form of nanoparticles. To achieve uniform ZnO coating, the SWCNTs first needed to be functionalized by treating the samples in a controlled ozone atmosphere. The uniformly ZnO coated SWCNTs were used to fabricate UV sensing devices. An UV irradiation of the ZnO coated samples turned them from hydrophobic to hydrophilic behaviour. Furthermore, thin films of the ZnO coated SWCNTs allowed us switch p-type field effect transistors made of pristine SWCNTs to have ambipolar characteristics.

Fabrication of ultrathin and highly uniform silicon on insulator by numerically controlled plasma chemical vaporization machining.

PubMed

Sano, Yasuhisa; Yamamura, Kazuya; Mimura, Hidekazu; Yamauchi, Kazuto; Mori, Yuzo

2007-08-01

Metal-oxide semiconductor field-effect transistors fabricated on a silicon-on-insulator (SOI) wafer operate faster and at a lower power than those fabricated on a bulk silicon wafer. Scaling down, which improves their performances, demands thinner SOI wafers. In this article, improvement on the thinning of SOI wafers by numerically controlled plasma chemical vaporization machining (PCVM) is described. PCVM is a gas-phase chemical etching method in which reactive species generated in atmospheric-pressure plasma are used. Some factors affecting uniformity are investigated and methods for improvements are presented. As a result of thinning a commercial 8 in. SOI wafer, the initial SOI layer thickness of 97.5+/-4.7 nm was successfully thinned and made uniform at 7.5+/-1.5 nm.

Current efforts on developing an HWIL synthetic environment for LADAR sensor testing at AMRDEC

NASA Astrophysics Data System (ADS)

Kim, Hajin J.; Cornell, Michael C.; Naumann, Charles B.

2005-05-01

Efforts in developing a synthetic environment for testing LADAR sensors in a hardware-in-the-loop simulation are continuing at the Aviation and Missile Research, Engineering, and Development Center (AMRDEC) of the U.S. Army Research, Engineering and Development Command (RDECOM). Current activities have concentrated on developing the optical projection hardware portion of the synthetic environment. These activities range from system level design down to component level testing. Of particular interest have been schemes for generating the optical signals representing the individual pixels of the projection. Several approaches have been investigated and tested with emphasis on operating wavelength, intensity dynamic range and uniformity, and flexibility in pixel waveform generation. This paper will discuss some of the results from these current efforts at RDECOM's Advanced Simulation Center (ASC).

Parental attributions for success in managing the behavior of children with ADHD.

PubMed

Coles, Erika K; Pelham, William E; Gnagy, Elizabeth M

2010-09-01

The current study evaluated the effects of differing intensities of behavior modification and medication on parents' self-reported success in managing their child's misbehavior and the attributions parents gave for success or failure. Children were randomized to receive in counterbalanced orders different levels of behavior modification, each for 3-week cycles. In addition, medication was manipulated using a medication assessment procedure. Parents reported daily how successful they were in managing their child's misbehavior and the attributions for either their success or failure. Parents of children with ADHD generally felt successful in managing their child's behavior, regardless of treatment condition. In the high behavior modification condition, they were more likely to endorse items that attributed their success to their own effort. In conditions in which parents were given more intensive tools to manage misbehavior they were more likely to attribute their success to their own effort.

High-aspect-ratio microstructures with versatile slanting angles on silicon by uniform metal-assisted chemical etching

NASA Astrophysics Data System (ADS)

Li, Liyi; Zhang, Cheng; Tuan, Chia-Chi; Chen, Yun; Wong, C.-P.

2018-05-01

High-aspect-ratio (HAR) microstructures on silicon (Si) play key roles in photonics and electromechanical devices. However, it has been challenging to fabricate HAR microstructures with slanting profiles. Here we report successful fabrication of uniform HAR microstructures with controllable slanting angles on (1 0 0)-Si by slanted uniform metal-assisted chemical etching (SUMaCE). The trenches have width of 2 µm, aspect ratio greater than 20:1 and high geometric uniformity. The slanting angles can be adjusted between 2-70° with respect to the Si surface normal. The results support a fundamental hypothesis that under the UMaCE condition, the preferred etching direction is along the normal of the thin film catalysts, regardless of the relative orientation of the catalyst to Si substrates or the crystalline orientation of the substrates. The SUMaCE method paves the way to HAR 3D microfabrication with arbitrary slanting profiles inside Si.

Adhesion of voids to bimetal interfaces with non-uniform energies

DOE PAGES

Zheng, Shijian; Shao, Shuai; Zhang, Jian; ...

2015-10-21

Interface engineering has become an important strategy for designing radiation-resistant materials. Critical to its success is fundamental understanding of the interactions between interfaces and radiation-induced defects, such as voids. Using transmission electron microscopy, here we report an interesting phenomenon in their interaction, wherein voids adhere to only one side of the bimetal interfaces rather than overlapping them. We show that this asymmetrical void-interface interaction is a consequence of differing surface energies of the two metals and non-uniformity in their interface formation energy. Specifically, voids grow within the phase of lower surface energy and wet only the high-interface energy regions. Furthermore,more » because this outcome cannot be accounted for by wetting of interfaces with uniform internal energy, our report provides experimental evidence that bimetal interfaces contain non-uniform internal energy distributions. Ultimately, this work also indicates that to design irradiation-resistant materials, we can avoid void-interface overlap via tuning the configurations of interfaces.« less

An E-plane analysis of aperture-matched horn antennas using the moment method and the uniform geometrical theory of diffraction

NASA Technical Reports Server (NTRS)

Heedy, D. J.; Burnside, W. D.

1984-01-01

The moment method and the uniform geometrical theory of diffraction are utilized to obtain two separate solutions for the E-plane field pattern of an aperture-matched horn antenna. This particular horn antenna consists of a standard pyramidal horn with the following modifications: a rolled edge section attached to the aperture edges and a curved throat section. The resulting geometry provides significantly better performance in terms of the pattern, impedance, and frequency characteristics than normally obtainable. The moment method is used to calculate the E-plane pattern and BSWR of the antenna. However, at higher frequencies, large amounts of computation time are required. The uniform geometrical theory of diffraction provides a quick and efficient high frequency solution for the E-plane field pattern. In fact, the uniform geometrical theory of diffraction may be used to initially design the antenna; then, the moment method may be applied to fine tune the design. This procedure has been successfully applied to a compact range feed design.

Internal conflict, market uniformity, and transparency in price competition between teams☆

PubMed Central

Kurschilgen, Michael; Morell, Alexander; Weisel, Ori

2017-01-01

The way profits are divided within successful teams imposes different degrees of internal conflict. We experimentally examine how the level of internal conflict, and whether such conflict is transparent to other teams, affects teams' ability to compete vis-à-vis each other, and, consequently, market outcomes. Participants took part in a repeated Bertrand duopoly game between three-player teams which had either the same or different level of internal conflict (uniform vs. mixed). Profit division was either private-pay (high conflict; each member received her own asking price) or equal-pay (low conflict; profits were divided equally). We find that internal conflict leads to (tacit) coordination on high prices in uniform private-pay duopolies, but places private-pay teams at a competitive disadvantage in mixed duopolies. Competition is softened by transparency in uniform markets, but intensified in mixed markets. We propose an explanation of the results and discuss implications for managers and policy makers. (D43, L22, C92) PMID:29180831

Feasibility of an International Multiple Sclerosis Rehabilitation Data Repository

PubMed Central

Bradford, Elissa Held; Baert, Ilse; Finlayson, Marcia; Feys, Peter

2018-01-01

Abstract Background: Multiple sclerosis (MS) rehabilitation evidence is limited due to methodological factors, which may be addressed by a data repository. We describe the perceived challenges of, motivators for, interest in participating in, and key features of an international MS rehabilitation data repository. Methods: A multimethod sequential investigation was performed with the results of two focus groups, using nominal group technique, and study aims informing the development of an online questionnaire. Percentage agreement and key quotations illustrated questionnaire findings. Subgroup comparisons were made between clinicians and researchers and between participants in North America and Europe. Results: Rehabilitation professionals from 25 countries participated (focus groups: n = 21; questionnaire: n = 166). The top ten challenges (C) and motivators (M) identified by the focus groups were database control/management (C); ethical/legal concerns (C); data quality (C); time, effort, and cost (C); best practice (M); uniformity (C); sustainability (C); deeper analysis (M); collaboration (M); and identifying research needs (M). Percentage agreement with questionnaire statements regarding challenges to, motivators for, interest in, and key features of a successful repository was at least 80%, 85%, 72%, and 83%, respectively, across each group of statements. Questionnaire subgroup analysis revealed a few differences (P < .05), including that clinicians more strongly identified with improving best practice as a motivator. Conclusions: Findings support clinician and researcher interest in and potential for success of an international MS rehabilitation data repository if prioritized challenges and motivators are addressed and key features are included. PMID:29507539

Feasibility of an International Multiple Sclerosis Rehabilitation Data Repository: Perceived Challenges and Motivators for Sharing Data.

PubMed

Bradford, Elissa Held; Baert, Ilse; Finlayson, Marcia; Feys, Peter; Wagner, Joanne

2018-01-01

Multiple sclerosis (MS) rehabilitation evidence is limited due to methodological factors, which may be addressed by a data repository. We describe the perceived challenges of, motivators for, interest in participating in, and key features of an international MS rehabilitation data repository. A multimethod sequential investigation was performed with the results of two focus groups, using nominal group technique, and study aims informing the development of an online questionnaire. Percentage agreement and key quotations illustrated questionnaire findings. Subgroup comparisons were made between clinicians and researchers and between participants in North America and Europe. Rehabilitation professionals from 25 countries participated (focus groups: n = 21; questionnaire: n = 166). The top ten challenges (C) and motivators (M) identified by the focus groups were database control/management (C); ethical/legal concerns (C); data quality (C); time, effort, and cost (C); best practice (M); uniformity (C); sustainability (C); deeper analysis (M); collaboration (M); and identifying research needs (M). Percentage agreement with questionnaire statements regarding challenges to, motivators for, interest in, and key features of a successful repository was at least 80%, 85%, 72%, and 83%, respectively, across each group of statements. Questionnaire subgroup analysis revealed a few differences (P < .05), including that clinicians more strongly identified with improving best practice as a motivator. Findings support clinician and researcher interest in and potential for success of an international MS rehabilitation data repository if prioritized challenges and motivators are addressed and key features are included.

Upgrading the SPP-500-1 moisture separators-steam reheaters used in the Leningrad NPP turbine units

NASA Astrophysics Data System (ADS)

Legkostupova, V. V.; Sudakov, A. V.

2015-03-01

The specific features of existing designs of moisture separators-steam reheaters (MSRs) and experience gained with using them at nuclear power plants are considered. Main factors causing damage to and failures of MSRs are described: nonuniform distribution of wet steam flow among the separation modules, breakthrough of moisture through the separator (and sometimes also through the steam reheater), which may lead to the occurrence of additional thermal stresses and, hence, to thermal-fatigue damage to or stress corrosion cracking of metal. MSR failure results in a less efficient operation of the turbine unit as a whole and have an adverse effect on the reliability of the low-pressure cylinder's last-stage blades. By the time the design service life of the SPP-500-1 MSRs had been exhausted in power units equipped with RBMK-1000 reactors, the number of damages inflicted to both the separation part and to the pipework and heating surface tubes was so large, that a considerable drop of MSR effectiveness and turbine unit efficiency as a whole occurred. The design of the upgraded separation part used in the SPP-500-1 MSR at the Leningrad NPP is described and its effectiveness is shown, which was confirmed by tests. First, efforts taken to achieve more uniform distribution of moisture content over the perimeter and height of steam space downstream of the separation modules and to bring it to values close to the design ones were met with success. Second, no noticeable effect of the individual specific features of separation modules on the moisture content was revealed. Recommendations on elaborating advanced designs of moisture separators-steam reheaters are given: an MSR arrangement in which the separator is placed under or on the side from the steam reheater; axial admission of wet steam for ensuring its uniform distribution among the separation modules; inlet chambers with an extended preliminary separation system and devices for uniformly distributing steam flows in the separator; separated layout of the of the separator and steam reheater; and use of transversely finned tube bundles for organizing cross flow of steam over the tubes.

Note: design and development of improved indirectly heated cathode based strip electron gun.

PubMed

Maiti, Namita; Bade, Abhijeet; Tembhare, G U; Patil, D S; Dasgupta, K

2015-02-01

An improved design of indirectly heated solid cathode based electron gun (200 kW, 45 kV, 270° bent strip type electron gun) has been presented. The solid cathode is made of thoriated tungsten, which acts as an improved source of electron at lower temperature. So, high power operation is possible without affecting structural integrity of the electron gun. The design issues are addressed based on the uniformity of temperature on the solid cathode and the single long filament based design. The design approach consists of simulation followed by extensive experimentation. In the design, the effort has been put to tailor the non-uniformity of the heat flux from the filament to the solid cathode to obtain better uniformity of temperature on the solid cathode. Trial beam experiments have been carried out and it is seen that the modified design achieves one to one correspondence of the solid cathode length and the electron beam length.

Hypothesis: Impregnated school uniforms reduce the incidence of dengue infections in school children.

PubMed

Wilder-Smith, A; Lover, A; Kittayapong, P; Burnham, G

2011-06-01

Dengue infection causes a significant economic, social and medical burden in affected populations in over 100 countries in the tropics and sub-tropics. Current dengue control efforts have generally focused on vector control but have not shown major impact. School-aged children are especially vulnerable to infection, due to sustained human-vector-human transmission in the close proximity environments of schools. Infection in children has a higher rate of complications, including dengue hemorrhagic fever and shock syndromes, than infections in adults. There is an urgent need for integrated and complementary population-based strategies to protect vulnerable children. We hypothesize that insecticide-treated school uniforms will reduce the incidence of dengue in school-aged children. The hypothesis would need to be tested in a community based randomized trial. If proven to be true, insecticide-treated school uniforms would be a cost-effective and scalable community based strategy to reduce the burden of dengue in children. Copyright © 2011 Elsevier Ltd. All rights reserved.

Note: Design and development of improved indirectly heated cathode based strip electron gun

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maiti, Namita; Patil, D. S.; Dasgupta, K.

An improved design of indirectly heated solid cathode based electron gun (200 kW, 45 kV, 270° bent strip type electron gun) has been presented. The solid cathode is made of thoriated tungsten, which acts as an improved source of electron at lower temperature. So, high power operation is possible without affecting structural integrity of the electron gun. The design issues are addressed based on the uniformity of temperature on the solid cathode and the single long filament based design. The design approach consists of simulation followed by extensive experimentation. In the design, the effort has been put to tailor themore » non-uniformity of the heat flux from the filament to the solid cathode to obtain better uniformity of temperature on the solid cathode. Trial beam experiments have been carried out and it is seen that the modified design achieves one to one correspondence of the solid cathode length and the electron beam length.« less

The effect of task demand and incentive on neurophysiological and cardiovascular markers of effort.

PubMed

Fairclough, Stephen H; Ewing, Kate

2017-09-01

According to motivational intensity theory, effort is proportional to the level of task demand provided that success is possible and successful performance is deemed worthwhile. The current study represents a simultaneous manipulation of demand (working memory load) and success importance (financial incentive) to investigate neurophysiological (EEG) and cardiovascular measures of effort. A 2×2 repeated-measures study was conducted where 18 participants performed a n-back task under three conditions of demand: easy (1-back), hard (4-back) and very hard (7-back). In addition, participants performed these tasks in the presence of performance-contingent financial incentive or in a no-incentive (pilot trial) condition. Three bands of EEG activity were quantified: theta (4-7Hz), lower-alpha (7.5-10Hz) and upper-alpha (10.5-13Hz). Fronto-medial activity in the theta band and activity in the upper-alpha band at frontal, central and parietal sites were sensitive to demand and indicated greatest effort when the task was challenging and success was possible. Mean systolic blood pressure and activity in the lower-alpha band at parietal sites were also sensitive to demand but also increased in the incentive condition across all levels of task demand. The results of the study largely support the predictions of motivational intensity using neurophysiological markers of effort. Copyright © 2017. Published by Elsevier B.V.

Perceptions of Project Representatives Concerning Project Success and Pre-Project Planning Effort

DTIC Science & Technology

1993-12-01

25 Table 2. What are your main reasons for the project’s level of success? ........... 28 Table 3. What , if anything...Table 3a. Other Categories for Table 3 .......................................................... 32 Table 4. What are your main reasons for your...assessment of the level of effort expended on pre-project planning? ............................. ....... .. .......... .. . .. 33 Table 5. What concerning

500 Maori PhDs in Five Years: Insights from a Successful Indigenous Higher Education Initiative

ERIC Educational Resources Information Center

Villegas, Malia Maya

2010-01-01

With this thesis, I present a case study of the effort to graduate 500 "Maori" doctorates in five years in New Zealand in order to advance our understanding of a successful Indigenous higher education initiative. By paying careful attention to contextual factors, I describe the theoretical and practical significance of this effort and…

In-Flight Performance of the Polarization Modulator in the CLASP Rocket Experiment

NASA Technical Reports Server (NTRS)

Ishikawa, Shin-nosuke; Shimizu, Toshifumi; Kano, Ryohei; Bando, Takamasa; Ishikawa, Ryoko; Giono, Gabriel; Beabout, Dyana L.; Beabout, Brent L.; Nakayama, Satoshi; Tajima, Takao

2016-01-01

We developed a polarization modulation unit (PMU), a motor system to rotate a waveplate continuously. In polarization measurements, the continuous rotating waveplate is an important element as well as a polarization analyzer to record the incident polarization in a time series of camera exposures. The control logic of PMU was originally developed for the next Japanese solar observation satellite SOLAR-C by the SOLAR-C working group. We applied this PMU for the Chromospheric Lyman-alpha SpectroPolarimeter (CLASP). CLASP is a sounding rocket experiment to observe the linear polarization of the Lyman-alpha emission (121.6 nm vacuum ultraviolet) from the upper chromosphere and transition region of the Sun with a high polarization sensitivity of 0.1 % for the first time and investigate their vector magnetic field by the Hanle effect. The driver circuit was developed to optimize the rotation for the CLASP waveplate (12.5 rotations per minute). Rotation non-uniformity of the waveplate causes error in the polarization degree (i.e. scale error) and crosstalk between Stokes components. We confirmed that PMU has superior rotation uniformity in the ground test and the scale error and crosstalk of Stokes Q and U are less than 0.01 %. After PMU was attached to the CLASP instrument, we performed vibration tests and confirmed all PMU functions performance including rotation uniformity did not change. CLASP was successfully launched on September 3, 2015, and PMU functioned well as designed. PMU achieved a good rotation uniformity, and the high precision polarization measurement of CLASP was successfully achieved.

In-flight performance of the polarization modulator in the CLASP rocket experiment

NASA Astrophysics Data System (ADS)

Ishikawa, Shin-nosuke; Shimizu, Toshifumi; Kano, Ryohei; Bando, Takamasa; Ishikawa, Ryoko; Giono, Gabriel; Beabout, Dyana L.; Beabout, Brent L.; Nakayama, Satoshi; Tajima, Takao

2016-07-01

We developed a polarization modulation unit (PMU), a motor system to rotate a waveplate continuously. In polarization measurements, the continuous rotating waveplate is an important element as well as a polarization analyzer to record the incident polarization in a time series of camera exposures. The control logic of PMU was originally developed for the next Japanese solar observation satellite SOLAR-C by the SOLAR-C working group. We applied this PMU for the Chromospheric Lyman-alpha SpectroPolarimeter (CLASP). CLASP is a sounding rocket experiment to observe the linear polarization of the Lyman-alpha emission (121.6 nm vacuum ultraviolet) from the upper chromosphere and transition region of the Sun with a high polarization sensitivity of 0.1 % for the first time and investigate their vector magnetic field by the Hanle effect. The driver circuit was developed to optimize the rotation for the CLASP waveplate (12.5 rotations per minute). Rotation non- uniformity of the waveplate causes error in the polarization degree (i.e. scale error) and crosstalk between Stokes components. We confirmed that PMU has superior rotation uniformity in the ground test and the scale error and crosstalk of Stokes Q and U are less than 0.01 %. After PMU was attached to the CLASP instrument, we performed vibration tests and confirmed all PMU functions performance including rotation uniformity did not change. CLASP was successfully launched on September 3, 2015, and PMU functioned well as designed. PMU achieved a good rotation uniformity, and the high precision polarization measurement of CLASP was successfully achieved.

The Human Student: The Essentiality of the Teacher-Student Connection in Higher Education

ERIC Educational Resources Information Center

Torrisi-Steele, Geraldine

2018-01-01

Higher education institutions are investing significant effort into the improvement of student success, retention and satisfaction. Some effort is being expended in research seeking to understand influencing factors, but the majority of effort is directed towards improving teaching quality. Effort to improve teaching quality is characterised by…

Review of synthetic approaches toward maoecrystal V.

PubMed

Smith, Brandon R; Njardarson, Jon T

2018-05-18

Synthetic approaches toward the complex natural product diterpenoid maoecrystal V are reviewed, including successful total syntheses, published synthetic efforts, and efforts compiled from dissertations. The review focuses on general synthetic strategies and chronicles efforts toward the molecule since its isolation in 2004, summarizing key contributions of these efforts to the broader synthetic community.

Design of indirectly heated thoriated tungsten cathode based strip electron gun

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maiti, Namita; Thakur, K.B.; Patil, D.S.

Design of indirectly heated solid cathode based electron gun (200 kW, 45 kV, 270 degree bent strip type electron gun) has been presented. The solid cathode is made of thoriated tungsten. The solid cathode design has been suitably done to achieve required electron beam cross section. The design approach consists of simulation followed by extensive experimentation. In the design, the effort has been put to reduce the non-uniformity of the heat flux from the filament to the solid cathode to obtain better uniformity of temperature on the solid cathode. Trial beam experiments shows that the modified design achieves one tomore » one correspondence of the solid cathode length and the electron beam length. (author)« less

A State-of-the-Art Contamination Effects Research and Test Facility

NASA Technical Reports Server (NTRS)

Olson, Keith R.; Folgner, Kelsey A.; Barrie, James D.; Villahermosa, Randy M.

2008-01-01

In the ongoing effort to better understand various spacecraft contamination phenomena, a new state of the art contamination effects research and test facility was designed, and recently brought on-line at The Aerospace Corporation s Space Materials Laboratory. This high vacuum test chamber employs multiple in-situ analytical techniques, making it possible to study both the qualitative and quantitative aspects of contaminant film formation in the presence or absence of VUV radiation. Adsorption and desorption kinetics, "photo-fixing efficiency", transmission loss of uniform contaminant films, light scatter from non-uniform films, and film morphology have been studied in this facility. This paper describes this new capability in detail and presents data collected from several of the analytical instruments.

Reusable launch vehicle development research

NASA Technical Reports Server (NTRS)

1995-01-01

NASA has generated a program approach for a SSTO reusable launch vehicle technology (RLV) development which includes a follow-on to the Ballistic Missile Defense Organization's (BMDO) successful DC-X program, the DC-XA (Advanced). Also, a separate sub-scale flight demonstrator, designated the X-33, will be built and flight tested along with numerous ground based technologies programs. For this to be a successful effort, a balance between technical, schedule, and budgetary risks must be attained. The adoption of BMDO's 'fast track' management practices will be a key element in the eventual success of NASA's effort.

HOW TO WRITE A SCIENTIFIC ARTICLE

PubMed Central

Manske, Robert C.

2012-01-01

Successful production of a written product for submission to a peer‐reviewed scientific journal requires substantial effort. Such an effort can be maximized by following a few simple suggestions when composing/creating the product for submission. By following some suggested guidelines and avoiding common errors, the process can be streamlined and success realized for even beginning/novice authors as they negotiate the publication process. The purpose of this invited commentary is to offer practical suggestions for achieving success when writing and submitting manuscripts to The International Journal of Sports Physical Therapy and other professional journals. PMID:23091783

Scaling NASA Applications to 1024 CPUs on Origin 3K

NASA Technical Reports Server (NTRS)

Taft, Jim

2002-01-01

The long and highly successful joint SGI-NASA research effort in ever larger SSI systems was to a large degree the result of the successful development of the MLP scalable parallel programming paradigm developed at ARC: 1) MLP scaling in real production codes justified ever larger systems at NAS; 2) MLP scaling on 256p Origin 2000 gave SGl impetus to productize 256p; 3) MLP scaling on 512 gave SGI courage to build 1024p O3K; and 4) History of MLP success resulted in IBM Star Cluster based MLP effort.

VA/DoD Collaboration Guidebook for Healthcare Research

DTIC Science & Technology

2011-01-24

specific time periods. The VA has academic affiliates that, in some instances, may supplement a researcher’s income and provide tenure and academic ...Clinical care dollars only Career Scientist and Research Scientist Research efforts paid by research funds Academic Researcher Research or...their graduate medical education (GME) program training director. DoD researchers may have scientific academic affiliations with the Uniformed

Brillouin zone grid refinement for highly resolved ab initio THz optical properties of graphene

NASA Astrophysics Data System (ADS)

Warmbier, Robert; Quandt, Alexander

2018-07-01

Optical spectra of materials can in principle be calculated within numerical frameworks based on Density Functional Theory. The huge numerical effort involved in these methods severely constraints the accuracy achievable in practice. In the case of the THz spectrum of graphene the primary limitation lays in the density of the reciprocal space sampling. In this letter we have developed a non-uniform sampling using grid refinement to achieve a high local sampling density with only moderate numerical effort. The resulting THz electron energy loss spectrum shows a plasmon signal below 50 meV with a ω(q) ∝√{ q } dispersion relation.

Proceedings of the July 2011 Traceability Research Summit.

PubMed

Newsome, Rosetta L; Bhatt, Tejas; McEntire, Jennifer C

2013-12-01

At a discussion-based forum of 50 leaders in the area of food product tracing, participants recognized the need for the development of a common vision for a simple, low cost and implementable traceability approach. A key theme that emerged during the day's discussions revolved around not reinventing the wheel: there are many efforts underway, including numerous pilots, and these efforts should be collaborative. The group sought more information on current initiatives and felt that learning from the experiences of others could help form a realistic vision for the future. Although any forthcoming actions from the US FDA are unknown, industry fully expects that improvements in product tracing will be necessary, and expects that industry itself (through the "demand" side) will enact requirements that may surpass regulatory mandates. A chief concern is uniform adoption, which will require outreach to and support from the global community as well as small firms that may lack the resources and education to keep up. Ultimately, an approach that is global, economical, scalable, and inclusive of firms of all sizes who handles all types of food products, will have the greatest likelihood of success. While the ability to rapidly link products across the supply chain serves as an ideal goal, there are still substantial concerns to be addressed, particularly regarding confidentiality of data, and who will have access to what information under what circumstances, which was woven into virtually every discussion topic. Who will spearhead the development of the visions is a question, but there was general agreement that a joint partnership which includes all stakeholders is a necessity. © 2012 Institute of Food Technologists®

Inferring strategies for disseminating physical activity policies, programs, and practices from the successes of tobacco control.

PubMed

Green, Lawrence W; Orleans, C Tracy; Ottoson, Judith M; Cameron, Roy; Pierce, John P; Bettinghaus, Erwin P

2006-10-01

Efforts at reducing tobacco use in the United States and Canada over the last half century have been amazingly successful. This article examines those efforts in order to identify policies, programs, and practices found useful in tobacco control that might be usefully disseminated to world populations to improve rates of physical activity. Tobacco-control activities began with efforts to influence the individual smoker through public education and counter-advertising. Increasing awareness of the addictive properties of tobacco, industry efforts to manipulate those properties, and to target youth with aggressive advertising, fueled public outrage that supported additional policy changes to include community interventions, legal actions, and restraints against the tobacco industry. The article first examines ways to view the process of transferring knowledge from one enterprise (reducing tobacco consumption) to another (increasing physical activity). Several theories of knowledge generalization and dissemination are explored: transfer, knowledge utilization, application, diffusion, and implementation. The second section identifies the dissemination of tobacco control by means of brief health behavior-change interventions for smoking cessation that have been successfully integrated into primary clinical care. The question of whether similar strategies can be successfully disseminated to increase physical activity is examined in detail. The article then moves on to look at the success of arguably the most successful program in the world at achieving a reduction in tobacco control-the State of California. Finally, we compare and contrast some of the lessons as they have played out in another national context-Canada. In the concluding section, some lessons are identified that we believe may be successfully utilized in societal attempts to increase physical activity in world populations.

32 CFR 104.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... UNIFORMED SERVICES § 104.3 Definitions. Critical mission. An operational mission that requires the skills or... incumbent possesses unique knowledge, extensive experience, and specialty skill training to successfully... requirement in which the incumbent must gain the necessary experience to qualify for key senior leadership...

An Exploratory Study of Alpha Contracting: Antecedents, Processes, Issues, Success Factors and Consequences

DTIC Science & Technology

2009-09-01

ABSTRACT (maximum 200 words) Alpha contracting is a collaborative effort between a buyer and supplier during contract formation to maximize efficiency...experienced Alpha contracting teams, to include contracting officers, DCAA, DCMA, end users/ customers , program managers and acquisition directors to better...PROCESSES, ISSUES, SUCCESS FACTORS AND CONSEQUENCES ABSTRACT Alpha contracting is a collaborative effort between a buyer and supplier

Microporous structure with layered interstitial surface treatment, and method and apparatus for preparation thereof

NASA Technical Reports Server (NTRS)

Koontz, Steven L. (Inventor)

1994-01-01

A microporous structure with layered interstitial surface treatments, and method and apparatus for preparation thereof is presented. The structure is prepared by sequentially subjecting a uniformly surface-treated structure to atomic oxygen treatment to remove an outer layer of surface treatment to a generally uniform depth, and then surface treating the so exposed layer with another surface treating agent. The atomic oxygen/surface treatment steps may optionally be repeated, each successive time to a lesser depth, to produce a microporous structure having multilayered surface treatments. The apparatus employs at least one side arm from a main atomic oxygen-containing chamber. The side arm has characteristic relaxation times such that a uniform atomic oxygen dose rate is delivered to a specimen positioned transversely in the side arm spaced from the main gas chamber.

Microporous structure with layered interstitial surface treatment, and method and apparatus for preparation thereof

NASA Technical Reports Server (NTRS)

Koontz, Steven L. (Inventor)

1992-01-01

A microporous structure with layered interstitial surface treatments, and the method and apparatus for its preparation are disclosed. The structure is prepared by sequentially subjecting a uniformly surface treated structure to atomic oxygen treatment to remove an outer layer of surface treatment to a generally uniform depth, and then surface treating the so exposed layer with another surface treating agent. The atomic oxygen/surface treatment steps may optionally be repeated, each successive time to a lesser depth, to produce a microporous structure having multilayered surface treatments. The apparatus employs at least one side arm from a main oxygen-containing chamber. The side arm has characteristic relaxation times such that a uniform atomic oxygen dose rate is delivered to a specimen positioned transversely in the side arm spaced from the main gas chamber.

State-local policy management project. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-08-01

The report describes case studies to explore new approaches for increasing state and local coordination in planning and managing programs in areas with significant scientific and technical components such as energy and environment. Specifically, the case studies reveal efforts of various states in the areas of energy conservation, weatherization, emergency preparedness, and air quality. Successes and failures of Maryland's decentralized approach to energy conservation are documented; success of the thermal and lighting efficiency standards program in Texas is discussed; state aid for local energy conservation programs in Clinton County, Michigan, is reviewed; and the success of the weatherization program inmore » Oregon is examined. Pilot programs in weatherization in Pennsylvania are shown to have led a statewide effort. Two Minnesota projects in emergency preparedness are documented and factors for success are listed. In addition, long-range planning for fuel shortages in New York is examined and the benefits of regional planning in Fairfax County, Virgina, are noted. Efforts are examined to improve air quality in Ohio, California, and New Jersey.« less

Successful Climate Science Communication Strategies

NASA Astrophysics Data System (ADS)

Sinclair, P.

2016-12-01

In the past decade, efforts to communicate the facts of global change have not successfully moved political leaders and the general public to action. In response, a number of collaborative efforts between scientists and professional communicators, writers, journalists, bloggers, filmmakers, artists and others have arisen seeking to bridge that gap. As a result, a new cadre of science-literate communicators, and media-savvy scientists have made themselves visible across diverse mainstream, traditional, and social media outlets. Because of these collaborations, in recent years, misinformation, and disinformation have been successfully met with accurate and credible rebuttals within a single news cycle.Examples of these efforts is the Dark Snow Project, a science/communication collaboration focusing initially on accelerated arctic melt and sea level rise, and the Climate Science Rapid Response team, which matches professional journalists with appropriate science experts in order to respond within a single news cycle to misinformation or misunderstandings about climate science.The session will discuss successful examples and suggest creative approaches for the future.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qiu, J; Zheng, X; Liu, H

Purpose: This study is to evaluate the feasibility of simultaneously integrated boost (SIB) to hypoxic subvolume (HTV) in nasopharyngeal carcinomas under the guidance of 18F-Fluoromisonidazole (FMISO) PET/CT using a novel non-uniform volumetric modulated arc therapy (VMAT)technique. Methods: Eight nasopharyngeal carcinoma patients treated with conventional uniform VMAT were retrospectively analyzed. For each treatment, actual conventional uniform VMAT plan with two or more arcs (2–2.5 arcs, totally rotating angle < 1000o) was designed with dose boost to hopxic subvolume (total dose, 84Gy) in the gross tumor volme (GTV) under the guidance of 18F- FMISO PET/CT. Based on the same dataset, experimental singlemore » arc non-uniform VAMT plans were generated with the same dose prescription using customized software tools. Dosimetric parameters, quality assurance and the efficiency of the treatment delivery were compared between the uniform and non-uniform VMAT plans. Results: To develop the non-uniform VMAT technique, a specific optimization model was successfully established. Both techniques generate high-quality plans with pass rate (>98%) with the 3mm, 3% criterion. HTV received dose of 84.1±0.75Gy and 84.1±1.2Gy from uniform and non-uniform VMAT plans, respectively. In terms of target coverage and dose homogeneity, there was no significant statistical difference between actual and experimental plans for each case. However, for critical organs at risk (OAR), including the parotids, oral cavity and larynx, dosimetric difference was significant with better dose sparing form experimental plans. Regarding plan implementation efficiency, the average machine time was 3.5 minutes for the actual VMAT plans and 3.7 minutes for the experimental nonuniform VMAT plans (p>0.050). Conclusion: Compared to conventional VMAT technique, the proposed non-uniform VMAT technique has the potential to produce efficient and safe treatment plans, especially in cases with complicated anatomical structures and demanding dose boost to subvolumes.« less

Infrared technology for satellite power conversion. [antenna arrays and bolometers

NASA Technical Reports Server (NTRS)

Campbell, D. P.; Gouker, M. A.; Gallagher, J. J.

1984-01-01

Successful fabrication of bismuth bolometers led to the observation of antenna action rom array elements. Fabrication of the best antennas arrays was made more facile with finding that increased argon flow during the dc sputtering produced more uniform bismuth films and bonding to antennas must be done with the substrate temperaure below 100 C. Higher temperatures damaged the bolometers. During the testing of the antennas, it was found that the use of a quasi-optical system provided a uniform radiation field. Groups of antennas were bonded in series and in parallel with the parallel configuration showing the greater response.

From complexity to reality: providing useful frameworks for defining systems of care.

PubMed

Levison-Johnson, Jody; Wenz-Gross, Melodie

2010-02-01

Because systems of care are not uniform across communities, there is a need to better document the process of system development, define the complexity, and describe the development of the structures, processes, and relationships within communities engaged in system transformation. By doing so, we begin to identify the necessary and sufficient components that, at minimum, move us from usual care within a naturally occurring system to a true system of care. Further, by documenting and measuring the degree to which key components are operating, we may be able to identify the most successful strategies in creating system reform. The theory of change and logic model offer a useful framework for communities to begin the adaptive work necessary to effect true transformation. Using the experience of two system of care communities, this new definition and the utility of a theory of change and logic model framework for defining local system transformation efforts will be discussed. Implications for the field, including the need to further examine the natural progression of systems change and to create quantifiable measures of transformation, will be raised as new challenges for the evolving system of care movement.

Perceptions community residents have about partner institutions and clinical research.

PubMed

Kennedy, Betty M; Katzmarzyk, Peter T; Johnson, William D; Griffin, Willene P; Kennedy, Kathleen B; Cefalu, William T; Ryan, Donna H

2013-12-01

Engaging community residents to obtain their feedback in conducting clinical research, and including them as leaders in implementing applicable health advances is crucial for success and sustaining large center awards. Forty-four adult men and women participated in one of four focus groups. Two groups each (one African American and one Caucasian) were conducted in Baton Rouge and in New Orleans. In an effort to determine the knowledge, attitudes, and beliefs Louisiana residents have about the Louisiana Clinical and Translational Science (LA CaTS) Center concept, four main themes emerged from focus group participants concerning the state's research institutions, and what it means to have these institutions operating under one umbrella to improve the quality of health of its people: (1) academic/research institutions of the State are uniformly widely recognized and held in high regard; (2) increasing awareness of clinical research is a necessity; (3) establishing the LA CaTS Center is an excellent idea; and (4) effective communication including delivery style is crucial to partnerships and especially to the community. Focus group discussions can provide insight into community residents' perceptions, beliefs, motivations, and patterns of behavior for strategically planning for large center awards. © 2013 Wiley Periodicals, Inc.

Public involvement case study -- The public, the media, and chemical weapons in the front yard: Spring Valley, Washington, D.C. (1993)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, K.

1994-12-31

On January 5, 1993, a worker digging a utility trench in an upscale Washington neighborhood uncovered some World War I chemical munitions. Once emergency officials heard the words ``poison gas`` and ``munitions,`` District of Columbia emergency equipment and workers streamed into the neighborhood. Reporters descended on the site. Soldiers in chemical suits arrived. Residents were evacuated. With the onslaught of flashing police lights, uniformed soldiers, and omnipresent news cameras, local homeowners began to panic. This one site had all the attributes of a great news story: disaster, panic, conflict, danger, and big government. But you didn`t see this story playedmore » out nightly on CNN. In fact, it wasn`t picked up as a major, controversial story. That`s because of the excellent work by those removing the munitions and a strong public involvement program. These turned a potential public relations disaster and media nightmare into a success story. Public involvement changed angry, frightened citizens into firm believers in the project. It turned cynical media into informed news outlets. And it made the munitions removal effort easier. The focus of this paper, however, is on the public relations battle.« less

Kpejigaou: an indigenous, high-protein, low-fat, cowpea-based griddled food proposed for coastal West Africa.

PubMed

Amonsou, Eric Oscar; Sakyi-Dawson, Esther; Saalia, Firibu Kwesi; Houssou, Paul

2008-12-01

Griddled cowpea paste foods have high nutritional potential because they are low in fat but high in protein. A good understanding of process and product characteristics of kpejigaou is necessary to improve its quality and enhance acceptability. To describe the product, evaluate critical variables in traditional processing, and determine consumer quality criteria and preferences for kpejigaou. A survey of kpejigaou processing was carried out among processors and regular consumers of kpejigaou. Kpejigaou is flat and circular in shape, with uniform thickness and porous structure. The production process of kpejigaou was found to be simple and rapid, but the quality of the finished product varied among processors and among batches. Critical processing variables affecting quality were dehulling of the cowpeas, type of griddling equipment, and griddling temperature. Texture (sponginess) is the most important quality index that determines the preference and acceptability of kpejigaou by consumers. Traditionally processed kpejigaou does not meet current standards for high-quality foods. This study provides the basis for efforts to standardize the kpejigaou process to ensure consistent product quality and enhance the acceptability of kpejigaou among consumers. Kpejigaou has a potential for success if marketed as a low-fat, nutritious fast food.

Generation of transgenic Hydra by embryo microinjection.

PubMed

Juliano, Celina E; Lin, Haifan; Steele, Robert E

2014-09-11

As a member of the phylum Cnidaria, the sister group to all bilaterians, Hydra can shed light on fundamental biological processes shared among multicellular animals. Hydra is used as a model for the study of regeneration, pattern formation, and stem cells. However, research efforts have been hampered by lack of a reliable method for gene perturbations to study molecular function. The development of transgenic methods has revitalized the study of Hydra biology(1). Transgenic Hydra allow for the tracking of live cells, sorting to yield pure cell populations for biochemical analysis, manipulation of gene function by knockdown and over-expression, and analysis of promoter function. Plasmid DNA injected into early stage embryos randomly integrates into the genome early in development. This results in hatchlings that express transgenes in patches of tissue in one or more of the three lineages (ectodermal epithelial, endodermal epithelial, or interstitial). The success rate of obtaining a hatchling with transgenic tissue is between 10% and 20%. Asexual propagation of the transgenic hatchling is used to establish a uniformly transgenic line in a particular lineage. Generating transgenic Hydra is surprisingly simple and robust, and here we describe a protocol that can be easily implemented at low cost.

Wear analysis and finishing of bioceramic implant surfaces.

PubMed

Denkena, Berend; Reichstein, Martin; van der Meer, Marijke; Ostermeier, Sven; Hurschler, Christof

2008-01-01

A primary cause for revision operations of joint replacements is the implant loosening, due to immune reactions resulting from the agglomeration of polyethylene wear debris. Motivated by the successful application of bioceramic materials in hip joint prostheses, a trend towards the development of hard implant materials has occurred. Nonetheless in the area of total knee arthroplasty (TKA), modern efforts have still utilized polyethylene as the tibial-inlay joint component. The use of bioceramic hard-hard-pairings for total knee arthroplasty has been prevented by the complex kinematics and geometries required. Ceramics cannot cope with non-uniform loads, which suggests the need for new designs appropriate to the material. Furthermore, biomechanical requirements should be considered. A rolling-gliding wear simulator, which reproduces the movements and stresses of the knee joint on specimens of simplified geometry, has therefore been developed. High-precision machining processes for free formed bioceramic surfaces, with suitable grinding and polishing tools which adjust to constantly changing contact conditions, are essential. The goal is to put automated finishing in one clamping with five simultaneous controlled axes into practice. The developed manufacturing technologies will allow the advantageous bioceramic materials to be applied and accepted for more complex joint replacements such as knee prostheses.

Interventions in Early Mathematics: Avoiding Pollution and Dilution.

PubMed

Sarama, Julie; Clements, Douglas H

2017-01-01

Although specific interventions in early mathematics have been successful, few have been brought to scale successfully, especially across the challenging diversity of populations and contexts in the early childhood system in the United States. In this chapter, we analyze a theoretically based scale-up model for early mathematics that was designed to avoid the pollution and dilution that often plagues efforts to achieve broad success. We elaborate the theoretical framework by noting the junctures that are susceptible to dilution or pollution. Then we expatiate the model's guidelines to describe specifically how they were designed and implemented to mitigate pollution and dilution. Finally, we provide evidence regarding the success of these efforts. © 2017 Elsevier Inc. All rights reserved.

Remote Sensing of Forest Cover in Boreal Zones of the Earth

NASA Astrophysics Data System (ADS)

Sedykh, V. N.

2011-12-01

Ecological tension resulting from human activities generates a need for joint efforts of countries in the boreal zone aimed at sustainable forest development, including: conservation of forests binding carbon and ensuring stability of the atmosphere gas composition; preservation of purity and water content of forest areas as conditions ensuring sustainability of the historically formed structure of forest landscapes; and preservation of all flora and fauna species composition diversity as a condition for sustainable existence and functioning of forest ecosystems. We have to address these problems urgently due to climate warming which can interact with the forest cover. In particular, in the forest zone of Siberia, the climate aridization will inevitably result in periodic drying of shallow bogs and upland forests with thick forest litter. This will bring fires of unprecedented intensity which will lead to catastrophic atmospheric pollution. In this connection, the above problems can be solved only by the united efforts of boreal-zone countries, through establishing a uniform system for remote sensing of forests aimed at obtaining and periodic update of comprehensive information for rational decision-making in prevention of adverse human effect on the forest. A need to join efforts in this field of natural resource management is determined by disparate data which were created expressly for economic accounting units used mainly for the solution of economic timber resource problems. However, ecological tasks outlined above can be solved appropriately only by using uniform technologies that are registered within natural territorial complexes (landscapes) established throughout the entire boreal zone. Knowledge of forest state within natural territorial entities having specific physiographic conditions, with account for current and future anthropogenic load, allow one to define evidence-based forest growth potential at these landscapes to ensure development of historically formed ecological properties of the forest. Constantly updated information will permit the regulation of human pressure on forests to ensure that there is no reduction in their role in the biosphere processes of carbon accumulation and release. Satellite monitoring within identified landscape requires initial quantitative information about forest, about other biotic components of landscapes, and about their abiotic environment determined through both ground-based measurements and remote sensing. Thus, a kind of passport should be kept for each landscape as a starting point for subsequent updating of remote sensing monitoring of forests and their habitats and the assessment of their changes. Implementation of such monitoring across the entire boreal zone of the Earth is possible on the basis of geographical and genetic typology of forest and phyto-geomorphological method of aerospace image interpretation. Both approaches are based on the use of relationships between topography and vegetation, and were successfully applied by the author to aerospace monitoring of the forest cover of West Siberian Plain.

The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 1 of 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck Colleen M,Edwards Susan R.,King Maureen L.

2011-09-01

This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archivalmore » research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.« less

The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 3 of 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck Colleen M.,Edwards Susan R.,King Maureen L.

2011-09-01

This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archivalmore » research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.« less

The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 2 of 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck Colleen M.,Edwards Susan R.,King Maureen L.

2011-09-01

This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archivalmore » research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.« less

Waste minimization/pollution prevention study of high-priority waste streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ogle, R.B.

1994-03-01

Although waste minimization has been practiced by the Metals and Ceramics (M&C) Division in the past, the effort has not been uniform or formalized. To establish the groundwork for continuous improvement, the Division Director initiated a more formalized waste minimization and pollution prevention program. Formalization of the division`s pollution prevention efforts in fiscal year (FY) 1993 was initiated by a more concerted effort to determine the status of waste generation from division activities. The goal for this effort was to reduce or minimize the wastes identified as having the greatest impact on human health, the environment, and costs. Two broadmore » categories of division wastes were identified as solid/liquid wastes and those relating to energy use (primarily electricity and steam). This report presents information on the nonradioactive solid and liquid wastes generated by division activities. More specifically, the information presented was generated by teams of M&C staff members empowered by the Division Director to study specific waste streams.« less

Interests, Effort, Achievement and Vocational Preference.

ERIC Educational Resources Information Center

Sjoberg, L.

1984-01-01

Relationships between interest in natural sciences and technology and perceived ability, success, and invested effort were studied in Swedish secondary school students. Interests were accounted for by logical orientation and practical value. Interests and grades were strongly correlated, but correlations between interests and effort and vocational…

Pine Island Bay movie

Atmospheric Science Data Center

2014-08-01

... between successive frames is not uniform. The flow of the glacier, widening of the rift, and subsequent break-off of the iceberg are ... a gap in image acquisition during Antarctic winter, when the glacier was in continuous darkness. MISR was built and is managed by NASA's ...

A Call to Action to Improve Math Placement Policies and Processes: Six Policy Recommendations to Increase STEM Student Aspirations and Success While Decreasing Racial and Income Gaps

ERIC Educational Resources Information Center

Couturier, Lara K.; Cullinane, Jenna

2015-01-01

This call to action is based on a simple but important premise: The nation cannot allow college placement policies, processes, and instruments to undermine promising efforts to increase student success in mathematics and increase attainment of STEM credentials. Efforts to redesign math pathways hold great promise for improving the teaching and…

Psychokinesis and Its Possible Implication to Warfare Strategy

DTIC Science & Technology

1985-01-01

E. 4Rhine began to study psychic phenomena; their research "initially focused on telepathy and clairvoyance. In 1934, J. B. Rhine instituted PK... dream recall (1983 PRL Annual Report). The efforts of PRL to standardize or at least to establish uniformity within the subject populations being...64 -77). Soviet Parapsychology Research. Medical Intelligence and Information Agency. (CLASSIFIED). (S18841.80). Ix, Stanescu, S. Telepathy in

Coordinated fee structure for developed recreation sites on the Ashley, Uinta, and Wasatch-Cache National Forests

Treesearch

Brent H. McBeth

1995-01-01

A joint effort between three National Forests in northern Utah was begun to provide a uniform process for establishing fees at developed recreation sites, based upon the "cost approach" method. This method can be adapted for other National Forest and District use and can be modified to reflect "comparable fees" and updated periodically to meet local...

Elimination of Health Disparities in Racial/Ethnic Minority Communities: Developing Data Indicators To Assess the Progress of Community-Based Efforts.

ERIC Educational Resources Information Center

Edberg, Mark C.; Wong, Frank Y.; Woo, Violet; Doong, Tuei

2003-01-01

Describes the development of a pilot uniform data set (UDS) intended to serve as the primary data collection mechanism for all grants and standard cooperative agreements funded by the U.S. Office of Minority Health. The UDS is the product of a formative research project with implications for other program evaluations. (SLD)

Guide for machine tool task force members

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, G.P.

1978-09-01

The purpose of the guide is to assist members of the Machine Tool Task Force (MTTF) in doing the job, preparing technical summary papers, and helping to achieve a uniform, high-quality output from this comprehensive study effort. It supplements the MTTF Plan (UCRL-52552) which contains other important information on the method of operation of MTTF that is related to the preparation of MTTF reports.

Did States Use Implementation Discretion to Reduce the Stringency of NCLB? Evidence from a Database of State Regulations

ERIC Educational Resources Information Center

Wong, Vivian C.; Wing, Coady; Martin, David; Krishnamachari, Anandita

2018-01-01

When No Child Left Behind (NCLB) became law in 2002, it was viewed as an effort to create uniform standards for students and schools across the country. More than a decade later, we know surprisingly little about how states actually implemented NCLB and the extent to which state implementation decisions managed to undo the centralizing objectives…

Desynchronization boost by non-uniform coordinated reset stimulation in ensembles of pulse-coupled neurons

PubMed Central

Lücken, Leonhard; Yanchuk, Serhiy; Popovych, Oleksandr V.; Tass, Peter A.

2013-01-01

Several brain diseases are characterized by abnormal neuronal synchronization. Desynchronization of abnormal neural synchrony is theoretically compelling because of the complex dynamical mechanisms involved. We here present a novel type of coordinated reset (CR) stimulation. CR means to deliver phase resetting stimuli at different neuronal sub-populations sequentially, i.e., at times equidistantly distributed in a stimulation cycle. This uniform timing pattern seems to be intuitive and actually applies to the neural network models used for the study of CR so far. CR resets the population to an unstable cluster state from where it passes through a desynchronized transient, eventually resynchronizing if left unperturbed. In contrast, we show that the optimal stimulation times are non-uniform. Using the model of weakly pulse-coupled neurons with phase response curves, we provide an approach that enables to determine optimal stimulation timing patterns that substantially maximize the desynchronized transient time following the application of CR stimulation. This approach includes an optimization search for clusters in a low-dimensional pulse coupled map. As a consequence, model-specific non-uniformly spaced cluster states cause considerably longer desynchronization transients. Intriguingly, such a desynchronization boost with non-uniform CR stimulation can already be achieved by only slight modifications of the uniform CR timing pattern. Our results suggest that the non-uniformness of the stimulation times can be a medically valuable parameter in the calibration procedure for CR stimulation, where the latter has successfully been used in clinical and pre-clinical studies for the treatment of Parkinson's disease and tinnitus. PMID:23750134

Cultivating Diversity and Competency in STEM: Challenges and Remedies for Removing Virtual Barriers to Constructing Diverse Higher Education Communities of Success.

PubMed

Whittaker, Joseph A; Montgomery, Beronda L

2012-01-01

The need to increase the number of college graduates in Science, Technology, Engineering, and Mathematics (STEM) disciplines is a national issue. As the demographics of the United States' population grow increasingly more diverse, the recognition that students of color are disproportionately under-represented among those individuals successful at completing STEM degrees requires exigent and sustained intervention. Although a range of efforts and funding have been committed to increasing the success of under-represented minority (URM) students at primarily white, or majority, institutions, widespread progress has been slow. Simultaneously, Historically Black Colleges and Universities and Minority Serving Institutions have demonstrated disproportionate successes in graduating URM students with STEM degrees and those that proceed to completing graduate-level degrees in the sciences. The differential successes of particular institutions with promoting the achievement of diverse individuals in obtaining academic STEM degrees suggest that with committed and strategic leadership, advancements in creating academic communities that promote the success of a diverse range of students in STEM can be achieved in part through assessing and mitigating environmental barriers that impede success at majority institutions. In this paper, we address issues related to the engagement of URM students in majority settings and describe some efforts that have shown success for promoting diversity in STEM and highlight continuing issues and factors associated with cultivating diversity in academic STEM disciplines at majority institutions. Recommended efforts include addressing academic assistance, professional and cultural socialization issues and institutional environmental factors that are associated with success or lack thereof for URMs in STEM.

Moonshot Science-Risks and Benefits.

PubMed

Casadevall, Arturo; Fang, Ferric C

2016-08-30

Ever since the successful Apollo 11 Moon landing in 1969, a "moonshot" has come to signify a bold effort to achieve a seemingly impossible task. The Obama administration recently called for a moonshot to cure cancer, an initiative that has elicited mixed responses from researchers who welcome additional funding but worry about raising expectations. We suggest that a successful moonshot requires a sufficient understanding of the basic science underlying a problem in question so that efforts can be focused on engineering a solution. Current gaps in our basic knowledge of cancer biology make the cancer moonshot a uniquely challenging endeavor. Nevertheless, history has shown that intensive research efforts have frequently yielded conceptual and technological breakthroughs with unanticipated benefits for society. We expect that this effort will be no different. Copyright © 2016 Casadevall and Fang.

A Complete UV Atlas of Standard Stars

NASA Technical Reports Server (NTRS)

Wu, Chi-Chao

2000-01-01

The general objective of this project is to provide a comprehensive ultraviolet spectral atlas of stars based on the data in the IUE Final Archive. The data have been uniformly processed by the IUE NEWSIPS pipeline system. The NEWSIPS gives an improved signal to noise ratio for the data that will be especially beneficial to low signal portions of the spectra; and it also gives more accurate fluxes for stars by adopting the latest absolute calibration and measured instrument parameters. Our new atlas, therefore, provides more uniform and accurate data than the version previously published. In addition, considerable efforts were devoted to obtain reliable spectral types, V,B-V, and E(B-V). Our goal is to provide the information which can be used with reasonable confidence by scientists.

Disaster averted: Community resilience in the face of a catastrophic flood.

PubMed

O'Neill, H Katherine; McLean, Andrew J; Kalis, Renetta; Shultz, James M

2016-01-01

In the spring of 2009, the Fargo, North Dakota, metropolitan area had 5 days to lay millions of sandbags to avoid devastation from record flooding of the Red River of the North. The community was able to successfully mitigate the flooding and escape potentially catastrophic economic, physical, and mental health consequences. We hypothesized that Fargo flood protection efforts reflected the community resilience factors proposed by Norris, Stevens, Pfefferbaum, et al. (2008): citizen involvement in mitigation efforts, effective organizational linkages, ongoing psychosocial support, and strong civic leadership in the face of rapidly changing circumstances. This community case report utilizes an extensive review of available sources, including news reports, government documents, research articles, and personal communication. Results demonstrate that Fargo's response to the threat of catastrophic flooding was consistent with Norris et al.'s (2008) factors of community resilience. Furthermore, success in 2009 carried over into future flood prevention and response efforts, as well as a structured approach to building psychological resilience. This case study contributes to the literature on community resilience by describing a community's successful efforts to avert a potentially catastrophic disaster.

Disaster averted: Community resilience in the face of a catastrophic flood

PubMed Central

O'Neill, H. Katherine; McLean, Andrew J.; Kalis, Renetta; Shultz, James M.

2016-01-01

ABSTRACT In the spring of 2009, the Fargo, North Dakota, metropolitan area had 5 days to lay millions of sandbags to avoid devastation from record flooding of the Red River of the North. The community was able to successfully mitigate the flooding and escape potentially catastrophic economic, physical, and mental health consequences. We hypothesized that Fargo flood protection efforts reflected the community resilience factors proposed by Norris, Stevens, Pfefferbaum, et al. (2008): citizen involvement in mitigation efforts, effective organizational linkages, ongoing psychosocial support, and strong civic leadership in the face of rapidly changing circumstances. This community case report utilizes an extensive review of available sources, including news reports, government documents, research articles, and personal communication. Results demonstrate that Fargo's response to the threat of catastrophic flooding was consistent with Norris et al.'s (2008) factors of community resilience. Furthermore, success in 2009 carried over into future flood prevention and response efforts, as well as a structured approach to building psychological resilience. This case study contributes to the literature on community resilience by describing a community's successful efforts to avert a potentially catastrophic disaster. PMID:28229016

Dynamic Leadership Succession: Strengthening Urban Principal Succession Planning

ERIC Educational Resources Information Center

Peters-Hawkins, April L.; Reed, Latish C.; Kingsberry, Francemise

2018-01-01

The Dynamic Leadership Succession model is used to analyze a leadership succession case in an urban school district. The qualitative findings show that the district did not forecast school leadership needs well; however, the principal sought to develop and mentor teacher leaders as her assistant principals. Second, sustaining efforts within the…

Career, Life, Work Habits & Insights of Successful Lives.

ERIC Educational Resources Information Center

Lo, Lusa; Eliot, Michael

The careers, lives, and work habits of successful individuals were examined to identify factors that might explain their success. Each researcher selected one successful individual to interview. The researchers attempted to select a diverse group of interviewees from the general population, taking special effort to include females and nonwhites.…

Efforts To Modify Sexual Orientation: A Review of Outcome Literature and Ethical Issues.

ERIC Educational Resources Information Center

Throckmorton, Warren

1998-01-01

Reviews successful efforts to modify patterns of sexual arousal from psychoanalytical, behavioral, cognitive, group, and religious perspectives. Presents an ethical analysis of the American Counseling Association's resolution expressing concerns about conversion therapy. Concludes that efforts to assist homosexuals who wish to modify their…

No Time to Lose: Turnaround Leader Performance Assessment

ERIC Educational Resources Information Center

Rhim, Lauren Morando

2012-01-01

Effective leadership is critical to successful school turnaround efforts. Yet, district leaders have historically been hesitant to hold leaders accountable for bold change efforts. As federal and state dollars flow to districts and individual schools charged with embarking upon transformative change efforts, districts must adopt a laser-sharp…

On the evolution of a retracting straight liquid sheet edge: experimental study

NASA Astrophysics Data System (ADS)

Krechetnikov, Rouslan; Mayer, Hans C.

2011-11-01

The evolution of the initially straight edge of a retracting liquid sheet is still a subject of debate. Theoretical and numerical studies have provided conflicting results, and experimental efforts have, to our knowledge, never been attempted owing to the difficulty in achieving a uniform edge. However, recent advances in experimental techniques, specifically those presented in detail in Poster #72 of APS-DFD 2010 (H.C. Mayer and R. Krechetnikov), have allowed us to uniformly detach a soap film from a straight edge using an impulsively heated wire frame. The detachment, retraction, and breakup of soap films (h ~ 10 μm) is analyzed using high speed photography. Owing to the Plateau border that connects the uniform film to the wire frames (wire diameter 25-250 μm) - a feature not present when rupturing films from a point - the early stages of retraction are dominated by a relatively large rim mass. We explore the phenomena at very early times (t < 100 μs) associated with the birth of these detached films which may add complexity to the problem of determining what instability mechanism(s) are responsible for their breakup.

Physician recruitment success: how to acquire top physician talent.

PubMed

Rosman, Judy

2011-01-01

This article provides step-by-step instructions on how to complete the strategic planning needed to ensure success in physician recruitment efforts, outlines how to build a successful recruitment team, and provides helpful advice to avoid common recruiting mistakes that can sabotage the recruitment efforts of even the best practices. This article discusses the role of the in-house hospital recruiter in the recruitment process, how to evaluate independent search firms, how to make use of the physicians in your group to ensure success during a site visit, and how to ensure that your new hire will be able to successfully develop a practice. The article also discusses how to find and use benchmarking data to ensure that your compensation package is competitive, and provides advice on how to help your new physician hit the ground running.

Employee suggestion programs: the rewards of involvement.

PubMed

Mishra, J M; McKendall, M

1993-09-01

Successful ESPs are the products of a great deal of effort by managers, administrators, teams, individuals, and reviewers, who are all striving to achieve the goals of increased profitability and enhanced employee involvement. A review of the literature indicates that there are several prescriptions that will increase the likelihood of a successful ESP (see the box). Today's American business prophets sound ceaseless calls to arms in the name of "world class performance," "global competitiveness," "total quality management," and a variety of other buzz terms. A burgeoning industry has evolved that promises, through speeches, teleconferences, seminars, and consulting contracts, to teach American organizations how to achieve excellence. In the face of a sputtering economy and unrelenting competitive pressure, today's managers must translate these laudatory ideals into hands-on reality without sacrificing the firm's profit margin to experimentation. If any idea can help an organization achieve improvement through a workable program, then that idea and that program deserve real consideration. An ESP represents an opportunity to tap the intelligence and resourcefulness of an organization's employees, and by doing so, reap significant cost savings. Those companies and managers that have an ESP program uniformly list economic advantages first when describing the benefits of their employee suggestion programs. But there is another deeper and longer term benefit inherent in an ESP. These programs allow employees to become involved in their organization; they drive deaccession to lower levels, they give employees more responsibility, they foster creative approaches to work, and they encourage creativity in pursuit of company goals.(ABSTRACT TRUNCATED AT 250 WORDS)

Integrated InAs/InP quantum-dot coherence comb lasers (Conference Presentation)

NASA Astrophysics Data System (ADS)

Lu, Zhenguo; Liu, Jiaren; Poole, Philip J.; Song, Chun-Ying; Webber, John; Mao, Linda; Chang, Shoude; Ding, Heping; Barrios, Pedro J.; Poitras, Daniel; Janz, Siegfried

2017-02-01

Current communication networks needs to keep up with the exponential growth of today's internet traffic, and telecommunications industry is looking for radically new integrated photonics components for new generation optical networks. We at National Research Council (NRC) Canada have successfully developed nanostructure InAs/InP quantum dot (QD) coherence comb lasers (CCLs) around 1.55 μm. Unlike uniform semiconductor layers in most telecommunication lasers, in these QD CCLs light is emitted and amplified by millions of semiconductor QDs less than 60 nm in diameter. Each QD acts like an isolated light source acting independently of its neighbours, and each QD emits light at its own unique wavelength. The end result is a QD CCL is more stable and has ultra-low timing jitter. But most importantly, a single QD CCL can simultaneously produce 50 or more separate laser beams at distinct wavelengths over the telecommunications C-band. Utilizing those unique properties we have put considerable effort well to design, grow and fabricate InAs/InP QD gain materials. After our integrated packaging and using electrical feedback-loop control systems, we have successfully demonstrated ultra-low intensity and phase noise, frequency-stabilized integrated QD CCLs with the repetition rates from 10 GHz to 100 GHz and the total output power up to 60 mW at room temperature. We have investigated their relative intensity noises, phase noises, RF beating signals and other performance of both filtered individual channel and the whole CCLs. Those highly phase-coherence comb lasers are the promising candidates for flexible bandwidth terabit coherent optical networks and signal processing applications.

Layered reactive particles with controlled geometries, energies, and reactivities, and methods for making the same

DOEpatents

Fritz, Gregory M.; Weihs, Timothy P.; Grzyb, Justin A.

2016-07-05

An energetic composite having a plurality of reactive particles each having a reactive multilayer construction formed by successively depositing reactive layers on a rod-shaped substrate having a longitudinal axis, dividing the reactive-layer-deposited rod-shaped substrate into a plurality of substantially uniform longitudinal segments, and removing the rod-shaped substrate from the longitudinal segments, so that the reactive particles have a controlled, substantially uniform, cylindrically curved or otherwise rod-contoured geometry which facilitates handling and improves its packing fraction, while the reactant multilayer construction controls the stability, reactivity and energy density of the energetic composite.

New method to access hyperbranched polymers with uniform structure via one-pot polymerization of inimer in microemulsion.

PubMed

Min, Ke; Gao, Haifeng

2012-09-26

A facile approach is presented for successful synthesis of hyperbranched polymers with high molecular weight and uniform structure by a one-pot polymerization of an inimer in a microemulsion. The segregated space in the microemulsion confined the inimer polymerization and particularly the polymer-polymer reaction within discrete nanoparticles. At the end of polymerization, each nanoparticle contained one hyperbranched polymer that had thousands of inimer units and low polydispersity. The hyperbranched polymers were used as multifunctional macroinitiators for synthesis of "hyper-star" polymers. When a degradable inimer was applied, the hyper-stars showed fast degradation into linear polymer chains with low molecular weight.

Synthesis, structural and optical properties of silver nanoparticles uniformly decorated ZnO nanowires

NASA Astrophysics Data System (ADS)

Zhang, Ke-Xin; Wen, Xing; Yao, Cheng-Bao; Li, Jin; Zhang, Meng; Li, Qiang-Hua; Sun, Wen-Jun; Wu, Jia-Da

2018-04-01

Silver (Ag) nanoparticles decorated Zinc oxide (A-ZnO) nanowires have been successfully synthesized by two-step chemical vapour deposition and magnetron sputtering method. The X-ray diffraction patterns revealed their hexagonal wurtzite structure. SEM images indicated the Ag nanoparticles are distributed uniformly on the surface of A-ZnO nanowires. By extending the sputtering time, the atomic percent of Ag increased gradually. Moreover, the photoluminescence results demonstrated two major emission peaks for the A-ZnO nanowires. Where, the visible emission peaks were stronger than those of unmodified ZnO nanowires. These studies promise their potential applications in multifunctional optical devices.

A uniformly valid approximation algorithm for nonlinear ordinary singular perturbation problems with boundary layer solutions.

PubMed

Cengizci, Süleyman; Atay, Mehmet Tarık; Eryılmaz, Aytekin

2016-01-01

This paper is concerned with two-point boundary value problems for singularly perturbed nonlinear ordinary differential equations. The case when the solution only has one boundary layer is examined. An efficient method so called Successive Complementary Expansion Method (SCEM) is used to obtain uniformly valid approximations to this kind of solutions. Four test problems are considered to check the efficiency and accuracy of the proposed method. The numerical results are found in good agreement with exact and existing solutions in literature. The results confirm that SCEM has a superiority over other existing methods in terms of easy-applicability and effectiveness.

Layered reactive particles with controlled geometries, energies, and reactivities, and methods for making the same

DOEpatents

Fritz, Gregory M; Knepper, Robert Allen; Weihs, Timothy P; Gash, Alexander E; Sze, John S

2013-04-30

An energetic composite having a plurality of reactive particles each having a reactive multilayer construction formed by successively depositing reactive layers on a rod-shaped substrate having a longitudinal axis, dividing the reactive-layer-deposited rod-shaped substrate into a plurality of substantially uniform longitudinal segments, and removing the rod-shaped substrate from the longitudinal segments, so that the reactive particles have a controlled, substantially uniform, cylindrically curved or otherwise rod-contoured geometry which facilitates handling and improves its packing fraction, while the reactant multilayer construction controls the stability, reactivity and energy density of the energetic composite.

The effect of sulfated polysaccharides on the crystallization of calcite superstructures

NASA Astrophysics Data System (ADS)

Fried, Ruth; Mastai, Yitzhak

2012-01-01

Calcite with unique morphology and uniform size has been successfully synthesized in the presence of classes of polysaccharides based on carrageenans. In the crystallization of calcite, the choice of different carrageenans, (iota, lambda and kappa), as additives concedes systematic study of the influence of different chemical structures and particularly molecular charge on the formation of CaCO 3 crystals. The uniform calcite superstructures are formed by assemblies and aggregation of calcite crystals. The mechanism for the formation of calcite superstructures was studied by a variety of techniques, SEM, TEM, XRD, time-resolved conductivity and light scattering measurements, focusing on the early stages of crystals' nucleation and aggregation.

Investigation of MgF2 optical thin films with ultralow refractive indices prepared from autoclaved sols.

PubMed

Murata, Tsuyoshi; Ishizawa, Hitoshi; Tanaka, Akira

2008-05-01

We have successfully developed a process to form high quality MgF(2) thin films with ultralow refractive indices from autoclaved sols prepared from magnesium acetate and hydrofluoric acid. And we have confirmed that our porous MgF(2) coatings have not only high transmittance in the UV region but also high uniformity of film thickness. They can be uniformly formed on phiv 300 mm substrates as a single coating and as a hybrid coating with sublayers formed by physical vapor deposition. They are expected to be applied to various optics that need high transmittance in the UV region.

Precisely Controlled Ultrathin Conjugated Polymer Films for Large Area Transparent Transistors and Highly Sensitive Chemical Sensors.

PubMed

Khim, Dongyoon; Ryu, Gi-Seong; Park, Won-Tae; Kim, Hyunchul; Lee, Myungwon; Noh, Yong-Young

2016-04-13

A uniform ultrathin polymer film is deposited over a large area with molecularlevel precision by the simple wire-wound bar-coating method. The bar-coated ultrathin films not only exhibit high transparency of up to 90% in the visible wavelength range but also high charge carrier mobility with a high degree of percolation through the uniformly covered polymer nanofibrils. They are capable of realizing highly sensitive multigas sensors and represent the first successful report of ethylene detection using a sensor based on organic field-effect transistors. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Exotic germplasm introgression effect on agronomic and fiber properties of upland cotton

USDA-ARS?s Scientific Manuscript database

Genetic diversity is an important breeder’s tool for selection and improvement in crop cultivar development. Any successful breeding program depends on selecting superior quality parents. Lack of genetic diversity limits the potential of the breeder in selecting elite parents. Genetic uniformity pre...

A Portrait of Parents of Successful Readers.

ERIC Educational Resources Information Center

Spiegel, Dixie Lee

Reviews of research, studies of early readers, and investigations of emergent literacy uniformly conclude that parents' beliefs, aspirations, and actions affect their children's growth into and embracing of literacy. However, conflicting results call into question the utility of simply correlating race or various socioeconomic factors, such as…

Germination response of Apocynum venetum seeds to temperature and water potential

USDA-ARS?s Scientific Manuscript database

Apocynum venetum (commonly known as luobuma or rafuma) is a shrub that is native to Eurasia. It is economically important for sand fixation, forage production, honey production, medicine, fiber and fuel. Rapid and uniform seed germination is critical for successful crop establishment and vegetation ...

A Market of Accents

ERIC Educational Resources Information Center

Blommaert, Jan

2009-01-01

This paper describes the cultural semantics of internet courses in American accent. Such courses are offered by corporate providers to specific groups of customers: people in search of success in the globalized business environment. The core of such courses is an order of indexicality which stresses uniformity and homogeneity, producing an…

Preparation of fish skin gelatin-based nanofibers incorporating cinnamaldehyde by solution blow spinning

USDA-ARS?s Scientific Manuscript database

Cinnamaldehyde, a natural preservative that can non-specifically deactivate foodborne pathogens, was successfully incorporated into fish skin gelatin (FSG) solutions and blow spun into uniform nanofibers. The effects of cinnamaldehyde ratios (5-30%, w/w FSG) on physicochemical properties of fiber-fo...

Enhanced Amendment Delivery to Subsurface Using Shear Thinning Fluid and Aqueous Foam for Metal, Radionuclide, and NAPL Remediation

NASA Astrophysics Data System (ADS)

Zhong, L.; Szecsody, J.; Li, X.; Oostrom, M.; Truex, M.

2010-12-01

In many contamination sites, removal of contaminants by any active remediation efforts is not practical due to the high cost and technological limitations. Alternatively, in situ remediation is expected to be the most important remediation strategy. Delivery of reactive amendment to the contamination zone is essential for the reactions between the contaminants and remedial amendments to proceed in situ. It is a challenge to effectively deliver remedial amendment to the subsurface contamination source areas in both aquifer and vadose zone. In aquifer, heterogeneity induces fluid bypassing the low-permeability zones, resulting in certain contaminated areas inaccessible to the remedial amendment delivered by water injection, thus inhibiting the success of remedial operations. In vadose zone in situ remediation, conventional solution injection and infiltration for amendment delivery have difficulties to achieve successful lateral spreading and uniform distribution of the reactive media. These approaches also tend to displace highly mobile metal and radionuclide contaminants such as hexavalent chromium [Cr(VI)] and technetium (Tc-99), causing spreading of contaminations. Shear thinning fluid and aqueous foam can be applied to enhance the amendment delivery and improve in situ subsurface remediation efficiency under aquifer and vadose zone conditions, respectively. Column and 2-D flow cell experiments were conducted to demonstrate the enhanced delivery and improved remediation achieved by the application of shear thinning fluid and foam injection at the laboratory scale. Solutions of biopolymer xanthan gum were used as the shear thinning delivering fluids. Surfactant sodium lauryl ether sulfate (STEOL CS-330) was the foaming agent. The shear thinning fluid delivery (STFD) considerably improved the sweeping efficiency over a heterogeneous system and enhanced the non-aqueous liquid phase (NAPL) removal. The delivery of amendment into low-perm zones (LPZs) by STFD also increased the persistence of amendment solution in the LPZs after injection. Immobilization of Tc-99 was improved when a reductant was delivered by foam versus by water-based solution to contaminated vadose zone sediments. Foam delivery remarkably improved the lateral distribution of fluids compared to direct liquid injection. In heterogeneous vadose zone formation, foam injection increased the liquid flow in the high permeable zones into which very limited fluid was distributed during liquid infiltration, demonstrating improved amendment distribution uniformity in the heterogeneous system by foam delivery.

Capable Copper Electrodeposition Process for Integrated Circuit - substrate Packaging Manufacturing

NASA Astrophysics Data System (ADS)

Ghanbari, Nasrin

This work demonstrates a capable reverse pulse deposition methodology to influence gap fill behavior inside microvia along with a uniform deposit in the fine line patterned regions for substrate packaging applications. Interconnect circuitry in IC substrate packages comprises of stacked microvia that varies in depth from 20microm to 100microm with an aspect ratio of 0.5 to 1.5 and fine line patterns defined by photolithography. Photolithography defined pattern regions incorporate a wide variety of feature sizes including large circular pad structures with diameter of 20microm - 200microm, fine traces with varying widths of 3microm - 30microm and additional planar regions to define a IC substrate package. Electrodeposition of copper is performed to establish the desired circuit. Electrodeposition of copper in IC substrate applications holds certain unique challenges in that they require a low cost manufacturing process that enables a void-free gap fill inside the microvia along with uniform deposition of copper on exposed patterned regions. Deposition time scales to establish the desired metal thickness for such packages could range from several minutes to few hours. This work showcases a reverse pulse electrodeposition methodology that achieves void-free gap fill inside the microvia and uniform plating in FLS (Fine Lines and Spaces) regions with significantly higher deposition rates than traditional approaches. In order to achieve this capability, systematic experimental and simulation studies were performed. A strong correlation of independent parameters that govern the electrodeposition process such as bath temperature, reverse pulse plating parameters and the ratio of electrolyte concentrations is shown to the deposition kinetics and deposition uniformity in fine patterned regions and gap fill rate inside the microvia. Additionally, insight into the physics of via fill process is presented with secondary and tertiary current simulation efforts. Such efforts lead to show "smart" control of deposition rate at the top and bottom of via to avoid void formation. Finally, a parametric effect on grain size and the ensuing copper metallurgical characteristics of bulk copper is also shown to enable high reliability substrate packages for the IC packaging industry.

Chemical-Vapor Deposition Of Silicon Carbide

NASA Technical Reports Server (NTRS)

Cagliostro, D. E.; Riccitiello, S. R.; Ren, J.; Zaghi, F.

1993-01-01

Report describes experiments in chemical-vapor deposition of silicon carbide by pyrolysis of dimethyldichlorosilane in hydrogen and argon carrier gases. Directed toward understanding chemical-kinetic and mass-transport phenomena affecting infiltration of reactants into, and deposition of SiC upon, fabrics. Part of continuing effort to develop method of efficient and more nearly uniform deposition of silicon carbide matrix throughout fabric piles to make improved fabric/SiC-matrix composite materials.

Operation Iraqi Freedom: Strategies, Approaches, Results, and Issues for Congress

DTIC Science & Technology

2009-04-02

Joost Hiltermann characterized the operations as “a fairly transparent partisan effort by the Supreme Council [ISCI] dressed in government uniforms to... poultry debate” of 2008. In mid-2008, as part of the search for sustainable economic activity, some military and PRT officials proposed supporting the...development of domestic poultry and egg farming. Some argued that such a business required relatively low start- up costs, and would provide both

Lithuanian Freedom Fighters’ Tactics Resisting the Soviet Occupation 1944-1953

DTIC Science & Technology

2012-12-14

Nazi efforts to recruit Lithuanian SS battalions, organizing an underground nationalistic press, etc., the overall goal of clandestine...Territorial Defense Force the Germans realized that the unit was pro-Lithuanian and posed a threat to the Nazi regime. As a result, the Germans arrested...of the LFF made the uniforms themselves utilizing civilian help. But some of LFF, however, wore civilian clothes with an approved LFF insignia .88

A priori collaboration in population imaging: The Uniform Neuro-Imaging of Virchow-Robin Spaces Enlargement consortium.

PubMed

Adams, Hieab H H; Hilal, Saima; Schwingenschuh, Petra; Wittfeld, Katharina; van der Lee, Sven J; DeCarli, Charles; Vernooij, Meike W; Katschnig-Winter, Petra; Habes, Mohamad; Chen, Christopher; Seshadri, Sudha; van Duijn, Cornelia M; Ikram, M Kamran; Grabe, Hans J; Schmidt, Reinhold; Ikram, M Arfan

2015-12-01

Virchow-Robin spaces (VRS), or perivascular spaces, are compartments of interstitial fluid enclosing cerebral blood vessels and are potential imaging markers of various underlying brain pathologies. Despite a growing interest in the study of enlarged VRS, the heterogeneity in rating and quantification methods combined with small sample sizes have so far hampered advancement in the field. The Uniform Neuro-Imaging of Virchow-Robin Spaces Enlargement (UNIVRSE) consortium was established with primary aims to harmonize rating and analysis (www.uconsortium.org). The UNIVRSE consortium brings together 13 (sub)cohorts from five countries, totaling 16,000 subjects and over 25,000 scans. Eight different magnetic resonance imaging protocols were used in the consortium. VRS rating was harmonized using a validated protocol that was developed by the two founding members, with high reliability independent of scanner type, rater experience, or concomitant brain pathology. Initial analyses revealed risk factors for enlarged VRS including increased age, sex, high blood pressure, brain infarcts, and white matter lesions, but this varied by brain region. Early collaborative efforts between cohort studies with respect to data harmonization and joint analyses can advance the field of population (neuro)imaging. The UNIVRSE consortium will focus efforts on other potential correlates of enlarged VRS, including genetics, cognition, stroke, and dementia.

Recruitment and retention of Alaska natives into nursing: elements enabling educational success.

PubMed

Rearden, Annette K

2012-01-01

In response to the underrepresentation of Alaska Native/American Indian nurses, nursing programs have implemented recruitment and retention efforts to support undergraduate Alaska Native/American Indian nursing students. The objective of this project was to provide graduates from the Recruitment and Retention of Alaska Natives into Nursing (RRANN) program the opportunity to identify program elements important to achieving academic success, levels of satisfaction, and make recommendations for future program direction. Findings suggest RRANN graduates viewed the program as vital to academic success. Recommendations include utilizing former graduates in recruitment and retention efforts, as mentors, and extending the program to benefit graduate students.

Enabling Science and Technology Research Teams: A Breadmaking Metaphor

ERIC Educational Resources Information Center

Pennington, Deana

2010-01-01

Anyone who has been involved with a cross-disciplinary team that combines scientists and information technology specialists knows just how tough it can be to move these efforts forward. Decades of experience point to the transformative potential of technology-enabled science efforts, and the success stories offer hope for future efforts. But for…

Using Monte Carlo Simulation To Improve Cargo Mass Estimates For International Space Station Commercial Resupply Flights

DTIC Science & Technology

2016-12-01

laboratory. The transition of this function to the commercial sector under Firm Fixed-Price contracting has forced both NASA and commercial providers to...adjust to make this effort successful. Improving bag-level cargo launch manifests delivered from NASA to the provider more than a year in advance is...contracting has forced both NASA and commercial providers to adjust to make this effort successful. Improving bag-level cargo launch manifests delivered from

Assessing relative abundance and reproductive success of shrubsteppe raptors

USGS Publications Warehouse

Lehman, Robert N.; Carpenter, L.B.; Steenhof, Karen; Kochert, Michael N.

1998-01-01

From 1991-1994, we quantified relative abundance and reproductive success of the Ferruginous Hawk (Buteo regalis), Northern Harrier (Circus cyaneus), Burrowing Owl (Speotytoc unicularia), and Short-eared Owl (Asio flammeus) on the shrubsteppe plateaus (benchlands) in and near the Snake River Birds of Prey National Conservation Area in southwestern Idaho. To assess relative abundance, we searched randomly selected plots using four sampling methods: point counts, line transects, and quadrats of two sizes. On a persampling-effort basis, transects were slightly more effective than point counts and quadrats for locating raptor nests (3.4 pairs detected/100 h of effort vs. 2.2-3.1 pairs). Random sampling using quadrats failed to detect a Short-eared Owl population increase from 1993 to 1994. To evaluate nesting success, we tried to determine reproductive outcome for all nesting attempts located during random, historical, and incidental nest searches. We compared nesting success estimates based on all nesting attempts, on attempts found during incubation, and the Mayfield model. Most pairs used to evaluate success were pairs found incidentally. Visits to historical nesting areas yielded the highest number of pairs per sampling effort (14.6/100 h), but reoccupancy rates for most species decreased through time. Estimates based on all attempts had the highest sample sizes but probably overestimated success for all species except the Ferruginous Hawk. Estimates of success based on nesting attempts found during incubation had the lowest sample sizes. All three methods yielded biased nesting snccess estimates for the Northern Harrier and Short-eared Owl. The estimate based on pairs found during incubation probably provided the least biased estimate for the Burrowing Owl. Assessments of nesting success were hindered by difficulties in confirming egg laying and nesting success for all species except the Ferruginous hawk.

Psycholegal abilities and restoration of competence to stand trial.

PubMed

Morris, Douglas R; Deyoung, Nathaniel J

2012-01-01

Criminal defendants adjudicated incompetent to stand trial are typically hospitalized for competence restoration in state institutions. Prolonged restoration hospitalizations involve civil rights concerns and increasing financial costs, and there remains interest in determining which individuals are likely to be successfully restored. We retrospectively reviewed hospital records of 455 male defendants admitted to a forensic treatment center for competence restoration in an effort to determine whether psychiatric diagnoses, demographic factors, or psycholegal abilities were predictive of successful or failed restoration. At varying stages of restoration efforts, psychotic disorder, mental retardation, and previous state hospitalization predicted unsuccessful restoration, while substance use and personality disorders were predictive of successful restoration. Psycholegal abilities were predictive of successful restoration and appeared to form a continuum, with basic behavior and outlook, factual legal understanding, and rational attorney assistance factors demonstrating progressively increased importance in successful restoration. Copyright © 2012 John Wiley & Sons, Ltd.

Loss of pace capture after radiofrequency application predicts the formation of uniform transmural lesions.

PubMed

Kosmidou, Ioanna; Houde-Walter, Haley; Foley, Lori; Michaud, Gregory

2013-04-01

Lesion transmurality is critical to procedural success in radiofrequency catheter ablation. We sought to determine whether loss of pace capture (PC) with high-output unipolar and/or bipolar pacing predicts the formation of uniform transmural lesions. Ten juvenile swine were anaesthetized and prepped under sterile conditions. Seventy-seven isolated radiofrequency applications (RFAs) using a 3.5 mm tip-irrigated catheter were available for analysis. Pace capture was assessed before and after RFA at 10 mA/2 ms and catheter stability verified with a three-dimensional mapping system. Pace capture was defined as 1 : 1 or intermittent local capture per paced beat. Myocardial contact and catheter orientation were assessed using intracardiac echo. Endocardial and epicardial lesion areas were measured after sacrifice using 2,3,5-triphenyltetrazolium chloride staining. A uniform transmural lesion was defined as an epicardial-to-endocardial surface ratio (epi/endo) ≥ 76%. Seventy-four per cent of lesions were transmural and 55.8% of lesions had an epi/endo ratio ≥ 76%. In all, 79.2% of lesions associated with loss of bipolar PC were uniform whereas 20.8% of lesions with loss of bipolar PC were non-uniform (P = 0.006). Loss of bipolar PC was associated with higher mean epicardial/endocardial ratio compared with lesions with persistent PC (P = 0.019). Echocardiographic evidence of optimal catheter contact during RFA improved the predictive accuracy of uniform lesion formation when loss of bipolar PC was noted after RFA. Loss of bipolar PC after RFA is associated with the formation of uniform lesions in atrial tissue. Optimal catheter contact further improves the predictive accuracy associated with loss of PC.

Genetic parameters for uniformity of harvest weight and body size traits in the GIFT strain of Nile tilapia.

PubMed

Marjanovic, Jovana; Mulder, Han A; Khaw, Hooi L; Bijma, Piter

2016-06-10

Animal breeding programs have been very successful in improving the mean levels of traits through selection. However, in recent decades, reducing the variability of trait levels between individuals has become a highly desirable objective. Reaching this objective through genetic selection requires that there is genetic variation in the variability of trait levels, a phenomenon known as genetic heterogeneity of environmental (residual) variance. The aim of our study was to investigate the potential for genetic improvement of uniformity of harvest weight and body size traits (length, depth, and width) in the genetically improved farmed tilapia (GIFT) strain. In order to quantify the genetic variation in uniformity of traits and estimate the genetic correlations between level and variance of the traits, double hierarchical generalized linear models were applied to individual trait values. Our results showed substantial genetic variation in uniformity of all analyzed traits, with genetic coefficients of variation for residual variance ranging from 39 to 58 %. Genetic correlation between trait level and variance was strongly positive for harvest weight (0.60 ± 0.09), moderate and positive for body depth (0.37 ± 0.13), but not significantly different from 0 for body length and width. Our results on the genetic variation in uniformity of harvest weight and body size traits show good prospects for the genetic improvement of uniformity in the GIFT strain. A high and positive genetic correlation was estimated between level and variance of harvest weight, which suggests that selection for heavier fish will also result in more variation in harvest weight. Simultaneous improvement of harvest weight and its uniformity will thus require index selection.

Coordinating a national rangeland monitoring training program: Success and lessons learned

USDA-ARS?s Scientific Manuscript database

One of the best ways to ensure quality of information gathered in a rangeland monitoring program is through a strong and uniform set of trainings. Curriculum development and delivery of monitoring trainings poses unique challenges that are not seen in academic settings. Participants come from a rang...

Partnerships for Success

ERIC Educational Resources Information Center

Principal Leadership, 2005

2005-01-01

Founded in 1966, Young Women's Leadership School is a public girls' school in New York City that serves grades 7-12. The school's philosophy--"to nurture the intellectual curiosity and creativity of its students and address the unique developmental needs of young women"--is put into practice on a daily basis. The girls wear uniforms,…

78 FR 71715 - Amendments to Highway Safety Program Guidelines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-29

... promulgate uniform guidelines for State highway safety programs. This notice revises five of the existing... successful and are based on sound science and program administration. The revised guidelines are Guideline No... become effective as of the date of publication of this document in the Federal Register. FOR FURTHER...

Fumigant distribution in forest nursery soils

Treesearch

Dong Wang; Stephen W. Fraedrich; Jennifer Juzwik; Kurt Spokas; Yi Zhang; William C. Koskinen

2006-01-01

Adequate concentration, exposure time and distribution uniformity of activated fumigant gases are prerequisites for successful soil fumigation. Field experiments were conducted to evaluate gas phase distributions of methyl isothiocyanate (MITC) and chloropicrin (CP) in two forest-tree nurseries. Concentrations of MITC and CP in soil air were measured from replicated...

Current Density Measurements of an Annular-Geometry Ion Engine

NASA Technical Reports Server (NTRS)

Shastry, Rohit; Patterson, Michael J.; Herman, Daniel A.; Foster, John E.

2012-01-01

The concept of the annular-geometry ion engine, or AGI-Engine, has been shown to have many potential benefits when scaling electric propulsion technologies to higher power. However, the necessary asymmetric location of the discharge cathode away from thruster centerline could potentially lead to non-uniformities in the discharge not present in conventional geometry ion thrusters. In an effort to characterize the degree of this potential nonuniformity, a number of current density measurements were taken on a breadboard AGI-Engine. Fourteen button probes were used to measure the ion current density of the discharge along a perforated electrode that replaced the ion optics during conditions of simulated beam extraction. Three Faraday probes spaced apart in the vertical direction were also used in a separate test to interrogate the plume of the AGI-Engine during true beam extraction. It was determined that both the discharge and the plume of the AGI-Engine are highly uniform, with variations under most conditions limited to 10% of the average current density in the discharge and 5% of the average current density in the plume. Beam flatness parameter measured 30 mm from the ion optics ranged from 0.85 0.95, and overall uniformity was shown to generally increase with increasing discharge and beam currents. These measurements indicate that the plasma is highly uniform despite the asymmetric location of the discharge cathode.

Space technology: A study of the significance of recognition for innovators of spinoff technologies. 1993 activities/1994, 1995 plans

NASA Technical Reports Server (NTRS)

1994-01-01

During the past 30 years as NASA has conducted technology transfer programs, it has gained considerable experience - particularly pertaining to the processes. However, three areas have not had much scrutiny: the examination of the contributions of the individuals who have developed successful spinoffs, the commercial success of the spinoffs themselves, and the degree to which they are understood by the public. In short, there has been limited evaluation to measure the success of technology transfer efforts mandated by Congress. Research conducted during the first year of a three-year NASA grant to the United States Space Foundation has taken the initial steps toward measuring the success of methodologies to accomplish that Congressionally-mandated technology transfer. In particular, the US Space Foundation, in cooperation with ARAC, technology transfer experts; JKA, a nationally recognized themed entertainment design company; and top evaluation consultants, inaugurated and evaluated a fresh approach including commercial practices to encourage, motivate, and energize technology transfer by: recognizing already successful efforts (Space Technology Hall of Fame Award), drawing potential business and industrial players into the process (Space Commerce Expo), and informing and motivating the general public (Space Technology Hall of Fame public venues). The first year's efforts are documented and directions for the future are outlined.

Knowledge-based assistance for science visualization and analysis using large distributed databases

NASA Technical Reports Server (NTRS)

Handley, Thomas H., Jr.; Jacobson, Allan S.; Doyle, Richard J.; Collins, Donald J.

1993-01-01

Within this decade, the growth in complexity of exploratory data analysis and the sheer volume of space data require new and innovative approaches to support science investigators in achieving their research objectives. To date, there have been numerous efforts addressing the individual issues involved in inter-disciplinary, multi-instrument investigations. However, while successful in small scale, these efforts have not proven to be open and scalable. This proposal addresses four areas of significant need: scientific visualization and analysis; science data management; interactions in a distributed, heterogeneous environment; and knowledge-based assistance for these functions. The fundamental innovation embedded with this proposal is the integration of three automation technologies, namely, knowledge-based expert systems, science visualization and science data management. This integration is based on concept called the DataHub. With the DataHub concept, NASA will be able to apply a more complete solution to all nodes of a distributed system. Both computation nodes and interactive nodes will be able to effectively and efficiently use the data services (address, retrieval, update, etc.) with a distributed, interdisciplinary information system in a uniform and standard way. This will allow the science investigators to concentrate on their scientific endeavors, rather than to involve themselves in the intricate technical details of the systems and tools required to accomplish their work. Thus, science investigators need not be programmers. The emphasis will be on the definition and prototyping of system elements with sufficient detail to enable data analysis and interpretation leading to publishable scientific results. In addition, the proposed work includes all the required end-to-end components and interfaces to demonstrate the completed concept.

Knowledge-based assistance for science visualization and analysis using large distributed databases

NASA Technical Reports Server (NTRS)

Handley, Thomas H., Jr.; Jacobson, Allan S.; Doyle, Richard J.; Collins, Donald J.

1992-01-01

Within this decade, the growth in complexity of exploratory data analysis and the sheer volume of space data require new and innovative approaches to support science investigators in achieving their research objectives. To date, there have been numerous efforts addressing the individual issues involved in inter-disciplinary, multi-instrument investigations. However, while successful in small scale, these efforts have not proven to be open and scaleable. This proposal addresses four areas of significant need: scientific visualization and analysis; science data management; interactions in a distributed, heterogeneous environment; and knowledge-based assistance for these functions. The fundamental innovation embedded within this proposal is the integration of three automation technologies, namely, knowledge-based expert systems, science visualization and science data management. This integration is based on the concept called the Data Hub. With the Data Hub concept, NASA will be able to apply a more complete solution to all nodes of a distributed system. Both computation nodes and interactive nodes will be able to effectively and efficiently use the data services (access, retrieval, update, etc.) with a distributed, interdisciplinary information system in a uniform and standard way. This will allow the science investigators to concentrate on their scientific endeavors, rather than to involve themselves in the intricate technical details of the systems and tools required to accomplish their work. Thus, science investigators need not be programmers. The emphasis will be on the definition and prototyping of system elements with sufficient detail to enable data analysis and interpretation leading to publishable scientific results. In addition, the proposed work includes all the required end-to-end components and interfaces to demonstrate the completed concept.

Reducing greenhouse gas emissions in agriculture without compromising food security?

NASA Astrophysics Data System (ADS)

Frank, Stefan; Havlík, Petr; Soussana, Jean-Francois; Levesque, Antoine; Valin, Hugo; Wollenberg, Eva; Kleinwechter, Ulrich; Fricko, Oliver; Gusti, Mykola; Herrero, Mario; Smith, Pete; Hasegawa, Tomoko; Kraxner, Florian; Obersteiner, Michael

2017-04-01

To keep global warming possibly below 1.5 C and mitigate adverse effects of climate change, agriculture, like all other sectors, will have to contribute to efforts in achieving net negative emissions by the end of the century. Cost-efficient distribution of mitigation across regions and sectors is typically calculated using a global uniform carbon price in climate stabilization scenarios. However, in reality such a carbon price could substantially affect other Sustainable Development Goals. Here, we assess the implications of climate change mitigation in agriculture for agricultural production and food security using an integrated modelling framework and explore ways of relaxing the competition between climate change mitigation and food availability. Using a scenario that limits global warming to 1.5 C, results indicate a food calorie loss in 2050 of up to 330 kcal per capita in food insecure countries. If only developed countries participated in the mitigation effort, the calorie loss would be 40 kcal per capita, however the climate target would not be achieved. Land-rich countries with a high proportion of emissions from land use change, such as Brazil, could reduce emissions with only a marginal effect on food availability. In contrast, agricultural mitigation in high population (density) countries, such as China and India, would lead to substantial food calorie loss without a major contribution to global GHG mitigation. Increasing soil carbon sequestration on agricultural land using a comprehensive set of management options, would allow achieving a 1.5 C target while reducing the implied calorie loss by up to 70% and storing up to 3.5 GtCO2 in soils. Hence, the promotion of so called "win-win" mitigation options i.e. soil carbon sequestration, and ensuring successful mitigation of land use change emissions are crucial to stabilize the climate without deteriorating food security.

Endoscopic bilateral stent-in-stent placement for malignant hilar obstruction using a large cell type stent.

PubMed

Park, Jin Myung; Lee, Sang Hyub; Chung, Kwang Hyun; Jang, Dong Kee; Ryu, Ji Kon; Kim, Yong-Tae; Lee, Jae Min; Paik, Woo Hyun

2016-12-01

Bilateral stent-in-stent (SIS) self-expandable metal stent placement is technically challenging for palliation of unresectable malignant hilar obstruction. In the SIS technique, the uniform large cell type biliary stent facilitates contralateral stent deployment through the mesh of the first metallic stent. This study aimed to assess the technical success and clinical effectiveness of this technique with a uniform large cell type biliary stent. Thirty-one patients who underwent bilateral SIS placement using a large cell type stent were reviewed retrospectively. All patients showed malignant hilar obstruction (Bismuth types II, III, IV) with different etiologies. Sixteen (51.6%) patients were male. The mean age of the patients was 67.0+/-14.0 years. Most patients were diagnosed as having hilar cholangiocarcinoma (58.1%) and gallbladder cancer (29.0%). Technical success rate was 83.9%. Success was achieved more frequently in patients without masses obstructing the biliary confluence (MOC) than those with MOC (95.2% vs 60.0%, P=0.03). Functional success rate was 77.4%. Complications occurred in 29.0% of the patients. These tended to occur more frequently in patients with MOC (50.0% vs 19.0%, P=0.11). Median time to recurrent biliary obstruction was 188 days and median survival was 175 days. The large cell type stent can be used efficiently for bilateral SIS placement in malignant hilar obstruction. However, the risk of technical failure increases in patients with MOC, and caution is needed to prevent complications for these patients.

Theoretical prediction of a novel inorganic fullerene-like family of silicon-carbon materials

NASA Astrophysics Data System (ADS)

Wang, Ruoxi; Zhang, Dongju; Liu, Chengbu

2005-08-01

In an effort to search for new inorganic fullerene-like structures, we designed a series of novel silicon-carbon cages, (SiC) n ( n = 6-36), based on the uniformly hybrid Si-C four- and six-membered-rings, and researched their geometrical and electronic structures, as well as their relative stabilities using the density function theory. Among these cages, the structures for n = 12, 16, and 36 were found to been energetically more favorable. The calculated disproportionation energy and binding energy per SiC unit show that the (SiC) 12 cage is the most stable one among these designed structures. The present calculations not only indicate that silicon-carbon fullerenes are promised to be synthesized in future, but also provide a new way for stabilizing silicon cages by uniformly doping carbon atoms into silicon structures.

Success as a Springboard for Novice Physical Education Teachers in Their Efforts to Develop a Professional Career

ERIC Educational Resources Information Center

Zach, Sima; Stein, Hanan; Nabel-Heller, Noa

2015-01-01

This article explored how 45 novice physical education teachers perceived success, and how success affected their motivation to continue teaching. Self-determination theory (SDT) was used to interpret the teachers' written reports, and focus group discussions were held concerning their success. Satisfaction with the competence, relatedness, and…

Long-term competence restoration.

PubMed

Morris, Douglas R; DeYoung, Nathaniel J

2014-01-01

While the United States Supreme Court's Jackson v. Indiana decision and most state statutes mandate determinations of incompetent defendants' restoration probabilities, courts and forensic clinicians continue to lack empirical evidence to guide these determinations and do not yet have a consensus regarding whether and under what circumstances incompetent defendants are restorable. The evidence base concerning the restoration likelihood of those defendants who fail initial restoration efforts is even further diminished and has largely gone unstudied. In this study, we examined the disposition of a cohort of defendants who underwent long-term competence restoration efforts (greater than six months) and identified factors related to whether these defendants were able to attain restoration and adjudicative success. Approximately two-thirds (n = 52) of the 81 individuals undergoing extended restoration efforts were eventually deemed restored to competence. Lengths of hospitalization until successful restoration are presented with implications for the reasonable length of time that restoration efforts should persist. Older individuals were less likely to be restored and successfully adjudicated, and individuals with more severe charges and greater factual legal understanding were more likely to be restored and adjudicated. The significance of these findings for courts and forensic clinicians is discussed.

Key Conditions for Successful Serial Entrepreneurship in Healthcare.

PubMed

Piron, Cameron

2017-01-01

As a serial entrepreneur in the medical device industry, the author embraces Snowdon's (2017) effort to create and stimulate dialogue among experts in health system innovation in an effort to define and support Canada's innovation agenda. In this paper, he outlines some of the attributes and skills that companies need to launch their products and scale their companies. He also identifies the main conditions of an innovation ecosystem that create the necessary infrastructure to enable and support highly successful companies while allowing them to accelerate their growth.

Automatic control system for uniformly paving iron ore pellets

NASA Astrophysics Data System (ADS)

Wang, Bowen; Qian, Xiaolong

2014-05-01

In iron and steelmaking industry, iron ore pellet qualities are crucial to end-product properties, manufacturing costs and waste emissions. Uniform pellet pavements on the grate machine are a fundamental prerequisite to ensure even heat-transfer and pellet induration successively influences performance of the following metallurgical processes. This article presents an automatic control system for uniformly paving green pellets on the grate, via a mechanism mainly constituted of a mechanical linkage, a swinging belt, a conveyance belt and a grate. Mechanism analysis illustrates that uniform pellet pavements demand the frontend of the swinging belt oscillate at a constant angular velocity. Subsequently, kinetic models are formulated to relate oscillatory movements of the swinging belt's frontend to rotations of a crank link driven by a motor. On basis of kinetic analysis of the pellet feeding mechanism, a cubic B-spline model is built for numerically computing discrete frequencies to be modulated during a motor rotation. Subsequently, the pellet feeding control system is presented in terms of compositional hardware and software components, and their functional relationships. Finally, pellet feeding experiments are carried out to demonstrate that the control system is effective, reliable and superior to conventional methods.

Deployment-based lifetime optimization model for homogeneous Wireless Sensor Network under retransmission.

PubMed

Li, Ruiying; Liu, Xiaoxi; Xie, Wei; Huang, Ning

2014-12-10

Sensor-deployment-based lifetime optimization is one of the most effective methods used to prolong the lifetime of Wireless Sensor Network (WSN) by reducing the distance-sensitive energy consumption. In this paper, data retransmission, a major consumption factor that is usually neglected in the previous work, is considered. For a homogeneous WSN, monitoring a circular target area with a centered base station, a sensor deployment model based on regular hexagonal grids is analyzed. To maximize the WSN lifetime, optimization models for both uniform and non-uniform deployment schemes are proposed by constraining on coverage, connectivity and success transmission rate. Based on the data transmission analysis in a data gathering cycle, the WSN lifetime in the model can be obtained through quantifying the energy consumption at each sensor location. The results of case studies show that it is meaningful to consider data retransmission in the lifetime optimization. In particular, our investigations indicate that, with the same lifetime requirement, the number of sensors needed in a non-uniform topology is much less than that in a uniform one. Finally, compared with a random scheme, simulation results further verify the advantage of our deployment model.

Measuring Student Success

ERIC Educational Resources Information Center

Baldwin, Christopher; Bensimon, Estela Mara; Dowd, Alicia C.; Kleiman, Lisa

2011-01-01

Student success is at the heart of both institutional effectiveness and the community college mission, yet measuring such success at community colleges is problematic. This article highlights three efforts to grapple with this problem--a multistate work group of system- and state-level policymakers to create an improved set of student success…

New generation of space capabilities resulting from US/RF cooperative efforts

NASA Astrophysics Data System (ADS)

Humpherys, Thomas; Misnik, Victor; Sinelshchikov, Valery; Stair, A. T., Jr.; Khatulev, Valery; Carpenter, Jack; Watson, John; Chvanov, Dmitry; Privalsky, Victor

2006-09-01

Previous successful international cooperative efforts offer a wealth of experience in dealing with highly sensitive issues, but cooperative remote sensing for monitoring and understanding the global environmental is in the national interest of all countries. Cooperation between international partners is paramount, particularly with the Russian Federation, due to its technological maturity and strategic political and geographical position in the world. Based on experience gained over a decade of collaborative space research efforts, continued cooperation provides an achievable goal as well as understanding the fabric of our coexistence. Past cooperative space research efforts demonstrate the ability of the US and Russian Federation to develop a framework for cooperation, working together on a complex, state-of-the-art joint satellite program. These efforts consisted of teams of scientists and engineers who overcame numerous cultural, linguistic, engineering approaches and different political environments. Among these major achievements are: (1) field measurement activities with US satellites MSTI and MSX and the Russian RESURS-1 satellite, as well as the joint experimental use of the US FISTA aircraft; (2) successful joint Science, Conceptual and Preliminary Design Reviews; (3) joint publications of scientific research technical papers, (4) Russian investment in development, demonstration and operation of the Monitor-E spacecraft (Yacht satellite bus), (5) successful demonstration of the conversion of the SS-19 into a satellite launch system, and (6) negotiation of contractual and technical assistant agreements. This paper discusses a new generation of science and space capabilities available to the Remote Sensing community. Specific topics include: joint requirements definition process and work allocation for hardware and responsibility for software development; the function, description and status of Russian contributions in providing space component prototypes and test articles; summary of planned experimental measurements and simulations; results of the ROKOT launch system; performance of the Monitor-E spacecraft; prototype joint mission operations control center; and a Handbook for Success in satellite collaborative efforts based upon a decade of lessons learned.

SU-C-9A-02: Structured Noise Index as An Automated Quality Control for Nuclear Medicine: A Two Year Experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, J; Christianson, O; Samei, E

Purpose: Flood-field uniformity evaluation is an essential element in the assessment of nuclear medicine (NM) gamma cameras. It serves as the central element of the quality control (QC) program, acquired and analyzed on a daily basis prior to clinical imaging. Uniformity images are traditionally analyzed using pixel value-based metrics which often fail to capture subtle structure and patterns caused by changes in gamma camera performance requiring additional visual inspection which is subjective and time demanding. The goal of this project was to develop and implement a robust QC metrology for NM that is effective in identifying non-uniformity issues, reporting issuesmore » in a timely manner for efficient correction prior to clinical involvement, all incorporated into an automated effortless workflow, and to characterize the program over a two year period. Methods: A new quantitative uniformity analysis metric was developed based on 2D noise power spectrum metrology and confirmed based on expert observer visual analysis. The metric, termed Structured Noise Index (SNI) was then integrated into an automated program to analyze, archive, and report on daily NM QC uniformity images. The effectiveness of the program was evaluated over a period of 2 years. Results: The SNI metric successfully identified visually apparent non-uniformities overlooked by the pixel valuebased analysis methods. Implementation of the program has resulted in nonuniformity identification in about 12% of daily flood images. In addition, due to the vigilance of staff response, the percentage of days exceeding trigger value shows a decline over time. Conclusion: The SNI provides a robust quantification of the NM performance of gamma camera uniformity. It operates seamlessly across a fleet of multiple camera models. The automated process provides effective workflow within the NM spectra between physicist, technologist, and clinical engineer. The reliability of this process has made it the preferred platform for NM uniformity analysis.« less

Recycling at Camp.

ERIC Educational Resources Information Center

Cummins, William M.

1988-01-01

Outlines a Michigan summer camp's efforts to reduce solid waste disposal by recycling cardboard, tin, glass, aluminum, and plastic milk containers. Points out variables affecting the success of such efforts. Discusses Michigan state funding for the development of recycling programs. (SV)

A qualitative review of sports concussion education: prime time for evidence-based knowledge translation.

PubMed

Mrazik, Martin; Dennison, Christopher R; Brooks, Brian L; Yeates, Keith Owen; Babul, Shelina; Naidu, Dhiren

2015-12-01

Educating athletes, coaches, parents and healthcare providers about concussion management is a public health priority. There is an abundance of information on sports concussions supported by position statements from governing sport and medical organisations. Yet surveys of athletes, parents, coaches and healthcare providers continue to identify multiple barriers to the successful management of sports concussion. To date, efforts to provide education using empirically sound methodologies are lacking. To provide a comprehensive review of scientific research on concussion education efforts and make recommendations for enhancing these efforts. Qualitative literature review of sports concussion education. Databases including PubMed, Sport Discus and MEDLINE were searched using standardised terms, alone and in combination, including 'concussion', 'sport', 'knowledge', 'education' and 'outcome'. Studies measuring the success of education interventions suggest that simply presenting available information may help to increase knowledge about concussions, but it does not produce long-term changes in behaviour among athletes. Currently, no empirical reviews have evaluated the success of commercially available sports concussion applications. The most successful education efforts have taken steps to ensure materials are user-friendly, interactive, utilise more than one modality to present information and are embedded in mandated training programmes or support legislation. Psychosocial theory-driven methods used to understand and improve 'buy in' from intended audiences have shown promise in changing behaviour. More deliberate and methodologically sound steps must be taken to optimise education and knowledge translation efforts in sports concussion. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pierce, Eric M.; Freshley, Mark D.; Hubbard, Susan S.

In this report, we start by examining previous efforts at linking science and DOE EM research with cleanup activities. Many of these efforts were initiated by creating science and technology roadmaps. A recurring feature of successfully implementing these roadmaps into EM applied research efforts and successful cleanup is the focus on integration. Such integration takes many forms, ranging from combining information generated by various scientific disciplines, to providing technical expertise to facilitate successful application of novel technology, to bringing the resources and creativity of many to address the common goal of moving EM cleanup forward. Successful projects identify and focusmore » research efforts on addressing the problems and challenges that are causing “failure” in actual cleanup activities. In this way, basic and applied science resources are used strategically to address the particular unknowns that are barriers to cleanup. The brief descriptions of the Office of Science basic (Environmental Remediation Science Program [ERSP]) and EM’s applied (Groundwater and Soil Remediation Program) research programs in subsurface science provide context to the five “crosscutting” themes that have been developed in this strategic planning effort. To address these challenges and opportunities, a tiered systematic approach is proposed that leverages basic science investments with new applied research investments from the DOE Office of Engineering and Technology within the framework of the identified basic science and applied research crosscutting themes. These themes are evident in the initial portfolio of initiatives in the EM groundwater and soil cleanup multi-year program plan. As stated in a companion document for tank waste processing (Bredt et al. 2008), in addition to achieving its mission, DOE EM is experiencing a fundamental shift in philosophy from driving to closure to enabling the long-term needs of DOE and the nation.« less

Teaching Engineering Ethics to PhD Students: A Berkeley-Delft Initiative : Commentary on "Ethics Across the Curriculum: Prospects for Broader (and Deeper) Teaching and Learning in Research and Engineering Ethics".

PubMed

Taebi, Behnam; Kastenberg, William E

2016-07-13

A joint effort by the University of California at Berkeley and Delft University of Technology to develop a graduate engineering ethics course for PhD students encountered two types of challenges: academic and institutional. Academically, long-term collaborative research efforts between engineering and philosophy faculty members might be needed before successful engineering ethics courses can be initiated; the teaching of ethics to engineering graduate students and collaborative research need to go hand-in-hand. Institutionally, both bottom-up approaches at the level of the faculty and as a joint research and teaching effort, and top-down approaches that include recognition by a University's administration and the top level of education management, are needed for successful and sustainable efforts to teach engineering ethics.

A mire of highly subjective and ineffective voluntary guidelines: tobacco industry efforts to thwart tobacco control in Malaysia.

PubMed

Assunta, M; Chapman, S

2004-12-01

To describe tobacco industry efforts in Malaysia to thwart government efforts to regulate tobacco promotion and health warnings. Systematic keyword and opportunistic website searches of formerly private tobacco industry internal documents made available through the Master Settlement Agreement and secondary websites; relevant information from news articles and financial reports. Commencing in the 1970s, the industry began to systematically thwart government tobacco control. Guidelines were successfully promoted in the place of legislation for over two decades. Even when the government succeeded in implementing regulations such as health warnings and advertising bans they were compromised and acted effectively to retard further progress for years to come. Counter-measures to delay or thwart government efforts to regulate tobacco were initiated by the industry. Though not unique to Malaysia, the main difference lies in the degree to which strategies were used to successfully counter stringent tobacco control measures between 1970 and 1995.

Effort Thrombosis Presenting as Pulmonary Embolism in a Professional Baseball Pitcher

PubMed Central

Bushnell, Brandon D.; Anz, Adam W.; Dugger, Keith; Sakryd, Gary A.; Noonan, Thomas J.

2009-01-01

Context: Effort thrombosis, or Paget-Schroetter’s syndrome, is a rare subset of thoracic outlet syndrome in which deep venous thrombosis of the upper extremity occurs as the result of repetitive overhead motion. It is occasionally associated with pulmonary embolism. This case of effort thrombosis and pulmonary embolus was in a 25-year-old major league professional baseball pitcher, in which the only presenting complaints involved dizziness and shortness of breath without complaints involving the upper extremity—usually, a hallmark of most cases of this condition. The patient successfully returned to play for 5 subsequent seasons at the major league level after multimodal treatment that included surgery for thoracic outlet syndrome. Objective: Though rare, effort thrombosis should be included in the differential diagnosis of throwing athletes with traditional extremity-focused symptoms and in cases involving pulmonary or thoracic complaints. Rapid diagnosis is a critical component of successful treatment. PMID:23015912

Success in Kashmir: a positive trend in civil-military integration during humanitarian assistance operations.

PubMed

Thompson, Wiley C

2010-01-01

The modern cast of disaster relief actors includes host nations, non-governmental organisations, private volunteer organisations, military organisations and others. Each group, civilian or military, has valuable skills and experiences critical to disaster relief work. The goal of this paper is to supplement the study of civil-military relief efforts with contemporary anecdotal experience. The paper examines the interaction between US military forces and other disaster relief actors during the 2005 Kashmir earthquake relief effort. The author uses direct observations made while working in Pakistan to contrast the relationships and activities from that effort with other accounts in prevailing scholarly disaster literature and military doctrine. Finally, this paper suggests that the Kashmir model of integration, coordination and transparency of intent creates a framework in which future humanitarian assistance operations could be successfully executed. Recommendations to improve civil-military interaction in future relief efforts will also be addressed.

Measuring Pollution Prevention

EPA Pesticide Factsheets

Measuring results is an essential component of any successful P2 program and is one way to determine the success of a technical assistance or training effort. This page introduces the concept of P2 measurement.

Engaging East Asia’s Changing Defense Elites.

DTIC Science & Technology

1996-09-01

press, the Diet and other ministries, and other regional powers in East Asia. Japan’s uniformed military, the Japan Self Defense Forces (JSDF), have...Japan, there is a growing pluralization in defense policy making, with the Japan Defense Agency (JDA) and Japan Self Defense Forces (JSDF) growing...notes that the April 1996 U.S.-Japan Security Declaration resulted from a conscious DoD effort to engage this broader strategic community while working

ADP Systems: Examination of Non-Federal Hospital Information Systems.

DTIC Science & Technology

1987-06-30

administrative and business management, and other purposes, such as research . In 1980, we reported1 that integrated hospital information systems evolved...Defense’s (DOD) and Veterans Administration’s (VA) efforts to develop and implement systems for federal hospitals. We used two methods to derive the...integrated in that they supported a variety of hospital activities and a uniform set of data access methods . The hospitals in our survey indicated that

Forest fire damage appraisal procedures and tables fo the northeast

Treesearch

A.W. Lindenmuth Jr.; J.J. Keetch; Ralph M. Nelson

1951-01-01

Forest fire control in the Northeast is a bigger and more responsible job than most people realize.  State , Federal, and other agencies cur­ rently spend some 6 millions of dollars in prevention  efforts and in sup­pressing the 15 or 16 thousand fires that burn each year. There is good reason, therefore, to deve lop better and more uniform method s of damage appraisal...

One-Step Laser Patterned Highly Uniform Reduced Graphene Oxide Thin Films for Circuit-Enabled Tattoo and Flexible Humidity Sensor Application.

PubMed

Park, Rowoon; Kim, Hyesu; Lone, Saifullah; Jeon, Sangheon; Kwon, Young Woo; Shin, Bosung; Hong, Suck Won

2018-06-06

The conversion of graphene oxide (GO) into reduced graphene oxide (rGO) is imperative for the electronic device applications of graphene-based materials. Efficient and cost-effective fabrication of highly uniform GO films and the successive reduction into rGO on a large area is still a cumbersome task through conventional protocols. Improved film casting of GO sheets on a polymeric substrate with quick and green reduction processes has a potential that may establish a path to the practical flexible electronics. Herein, we report a facile deposition process of GO on flexible polymer substrates to create highly uniform thin films over a large area by a flow-enabled self-assembly approach. The self-assembly of GO sheets was successfully performed by dragging the trapped solution of GO in confined geometry, which consisted of an upper stationary blade and a lower moving substrate on a motorized translational stage. The prepared GO thin films could be selectively reduced and facilitated from the simple laser direct writing process for programmable circuit printing with the desired configuration and less sample damage due to the non-contact mode operation without the use of photolithography, toxic chemistry, or high-temperature reduction methods. Furthermore, two different modes of the laser operating system for the reduction of GO films turned out to be valuable for the construction of novel graphene-based high-throughput electrical circuit boards compatible with integrating electronic module chips and flexible humidity sensors.

Turn over folders: a proven tool in succession management planning.

PubMed

Engells, Thomas E

2011-01-01

The dual challenges of succession management and succession management planning are considerable. A tool, the Turn over Folder, was introduced and described in detail as a useful first step in succession management planning. The adoption of that tool will not in itself produce a succession management plan, but it will orientate the organization and its members to the reality of succession management in all important leadership and critical positions. Succession management is an important consideration in all progressive organizations and well worth the effort.

Children's Perceptions of Hypothetical Peers With Undesirable Characteristics: Role of the Peers' Desire to Change, Source of Effort to Change, and Outcome.

PubMed

Barnett, Mark A; Sonnentag, Tammy L; Wadian, Taylor W; Jones, Tucker L; Langley, Courtney A

2015-01-01

The present study, involving sixth- to eighth-grade students, is an extension of a prior investigation (Barnett, Livengood, Sonnentag, Barlett, & Witham, 2010) that examined children's perceptions of hypothetical peers with various undesirable characteristics. Results indicate that children's perceptions of hypothetical peers with an undesirable characteristic are influenced by the peers' desire to change, the source of effort to change, and the peers' success or failure in changing the characteristic. The children anticipated responding more favorably to peers who were successful in overcoming an undesirable characteristic than peers who were unsuccessful. Regardless of the peers' outcome, the children anticipated responding more favorably to peers who tried to change than peers who relied on the effort of adult authorities to motivate change. The children perceived successful peers as experiencing more positive affect than their unsuccessful counterparts, especially if the success was presented as a fulfillment of the peers' desire to change their undesirable characteristic. Finally, the children's ratings reflected the belief that, among peers who failed to change their undesirable characteristic, lacking the desire to change increases the relative likelihood that the characteristic will be permanent.

Improving rangeland seeding success in post-fire water repellent soil using surfactant seed coating technology

USDA-ARS?s Scientific Manuscript database

Severe disturbance from catastrophic wildfires often requires that native plant materials be reintroduced through reseeding, but the success rate of these restoration efforts in arid environments is notoriously low. Post-fire soil water repellency can limit reseeding success by decreasing soil moist...

Using Annual Forbs and Early Seral Species in Seeding Mixtures for Improved Success in Great Basin Restoration

USDA-ARS?s Scientific Manuscript database

Use of native annual and early sera! species in Great Basin rangeland reseeding efforts may increase invasion resistance, facilitate succession to desired vegetation, and improve restoration/rehabilitation success. Because they occupy a similar ecological niche, due to functional trait similarities ...

Uniformly wound superconducting coil and method of making same

DOEpatents

Mookerjee, S.; Weijun, S.; Yager, B.

1994-03-08

A coil of superconducting wire for a superconducting magnet is described having a relatively dense and uniformly spaced winding to enhance the homogeneity and strength of the magnetic field surrounding the coil and a method of winding the same wherein the mandrel used to wind said coil comprises removable spacers and retainers forming a plurality of outwardly opening slots, each of said slots extending generally about the periphery of the mandrel and being sized to receive and outwardly align and retain successive turns of the superconducting wire within each slot as the wire is wound around and laterally across the mandrel to form a plurality of wire ribbons of a predetermined thickness laterally across the mandrel. 8 figures.

Substrate solder barriers for semiconductor epilayer growth

DOEpatents

Drummond, Timothy J.; Ginley, David S.; Zipperian, Thomas E.

1989-01-01

During the growth of compound semiconductors by epitaxial processes, substrates are typically mounted to a support. In modular beam epitaxy, mounting is done using indium as a solder. This method has two drawbacks: the indium reacts with the substrate, and it is difficult to uniformly wet the back of a large diameter substrate. Both of these problems have been successfully overcome by sputter coating the back of the substrate with a thin layer of tungsten carbide or tungsten carbide and gold. In addition to being compatible with the growth of high quality semiconductor epilayers this coating is also inert in all standard substrate cleaning etchants used for compound semiconductors, and provides uniform distribution of energy in radiant heating.

Substrate solder barriers for semiconductor epilayer growth

DOEpatents

Drummond, T.J.; Ginley, D.S.; Zipperian, T.E.

1989-05-09

During the growth of compound semiconductors by epitaxial processes, substrates are typically mounted to a support. In modular beam epitaxy, mounting is done using indium as a solder. This method has two drawbacks: the indium reacts with the substrate, and it is difficult to uniformly wet the back of a large diameter substrate. Both of these problems have been successfully overcome by sputter coating the back of the substrate with a thin layer of tungsten carbide or tungsten carbide and gold. In addition to being compatible with the growth of high quality semiconductor epilayers this coating is also inert in all standard substrate cleaning etchants used for compound semiconductors, and provides uniform distribution of energy in radiant heating.

Substrate solder barriers for semiconductor epilayer growth

DOEpatents

Drummond, T.J.; Ginley, D.S.; Zipperian, T.E.

1987-10-23

During the growth of compound semiconductors by epitaxial processes, substrates are typically mounted to a support. In molecular beam epitaxy, mounting is done using indium as a solder. This method has two drawbacks: the indium reacts with the substrate, and it is difficult to uniformly wet the back of a large diameter substrate. Both of these problems have been successfully overcome by sputter coating the back of the substrate with a thin layer of tungsten carbide or tungsten carbide and gold. In addition to being compatible with the growth of high quality semiconductor epilayers this coating is also inert in all standard substate cleaning etchants used for compound semiconductors, and provides uniform distribution of energy in radiant heating. 1 tab.

Uniformly wound superconducting coil and method of making same

DOEpatents

Mookerjee, Sumit; Weijun, Shen; Yager, Billy

1994-01-01

A coil of superconducting wire for a superconducting magnet having a relaely dense and uniformly spaced winding to enhance the homogeneity and strength of the magnetic field surrounding the coil and a method of winding the same wherein the mandrel used to wind said coil comprises removable spacers and retainers forming a plurality of outwardly opening slots, each of said slots extending generally about the periphery of the mandrel and being sized to receive and outwardly align and retain successive turns of the superconducting wire within each slot as the wire is wound around and laterally across the mandrel to form a plurality of wire ribbons of a predetermined thickness laterally across the mandrel.

Experimental investigation on large-area dielectric barrier discharge in atmospheric nitrogen and air assisted by the ultraviolet lamp.

PubMed

Zhang, Yan; Gu, Biao; Wang, Wenchun; Wang, Dezhen; Peng, Xuwen

2009-04-01

In this paper, ultraviolet radiation produced by the ultraviolet lamp is employed to supply pre-ionization for the dielectric barrier discharge in N(2) or air at atmospheric pressure. The effect of the ultraviolet pre-ionization on improving the uniformity of the dielectric barrier discharge is investigated experimentally. The atmospheric pressure glow discharge of the large area (270 mm x 120 mm) is obtained successfully via the ultraviolet pre-ionization in atmospheric DBD in N(2) when the gas gap decrease to 3mm. Based on the emission spectra, the mechanism which ultraviolet pre-ionization improves the uniformity of the dielectric barrier discharge is discussed.

Undergraduate Research and Its Impact on Student Success for Underrepresented Students

ERIC Educational Resources Information Center

O'Donnell, Ken; Botelho, Judy; Brown, Jessica; González, Gerardo M.; Head, William

2015-01-01

This chapter captures the mission and spirit of the California State University in its efforts to institutionalize undergraduate research and support the success of students traditionally underrepresented in higher education.

Sequential elution process

DOEpatents

Kingsley, I.S.

1987-01-06

A process and apparatus are disclosed for the separation of complex mixtures of carbonaceous material by sequential elution with successively stronger solvents. In the process, a column containing glass beads is maintained in a fluidized state by a rapidly flowing stream of a weak solvent, and the sample is injected into this flowing stream such that a portion of the sample is dissolved therein and the remainder of the sample is precipitated therein and collected as a uniform deposit on the glass beads. Successively stronger solvents are then passed through the column to sequentially elute less soluble materials. 1 fig.

Attributions to Success and Failure in English Language Learning: The Effects of Gender, Age and Perceived Success

ERIC Educational Resources Information Center

Genç, Gülten

2016-01-01

The main purpose of this study is to analyze Turkish tertiary level EFL learners' attributions to success and failure and the effects of gender, age, and perceived success on their attributions. The results indicated that EFL learners respectively attributed interest, ability, task difficulty, effort, luck and the influence of teacher and school…

Inhibition of Ras for cancer treatment: the search continues

PubMed Central

Baines, Antonio T.; Xu, Dapeng; Der, Channing J.

2012-01-01

Background The RAS oncogenes (HRAS, NRAS and KRAS) comprise the most frequently mutated class of oncogenes in human cancers (33%), stimulating intensive effort in developing anti-Ras inhibitors for cancer treatment. Discussion Despite intensive effort, to date no effective anti-Ras strategies have successfully made it to the clinic. We present an overview of past and ongoing strategies to inhibit oncogenic Ras in cancer. Conclusions Since approaches to directly target mutant Ras have not been successful, most efforts have focused on indirect approaches to block Ras membrane association or downstream effector signaling. While inhibitors of effector signaling are currently under clinical evaluation, genome-wide unbiased genetic screens have identified novel directions for future anti-Ras drug discovery. PMID:22004085

High Positive End-Expiratory Pressure Renders Spontaneous Effort Noninjurious.

PubMed

Morais, Caio C A; Koyama, Yukiko; Yoshida, Takeshi; Plens, Glauco M; Gomes, Susimeire; Lima, Cristhiano A S; Ramos, Ozires P S; Pereira, Sérgio M; Kawaguchi, Naomasa; Yamamoto, Hirofumi; Uchiyama, Akinori; Borges, João B; Vidal Melo, Marcos F; Tucci, Mauro R; Amato, Marcelo B P; Kavanagh, Brian P; Costa, Eduardo L V; Fujino, Yuji

2018-05-15

In acute respiratory distress syndrome (ARDS), atelectatic solid-like lung tissue impairs transmission of negative swings in pleural pressure (Ppl) that result from diaphragmatic contraction. The localization of more negative Ppl proportionally increases dependent lung stretch by drawing gas either from other lung regions (e.g., nondependent lung [pendelluft]) or from the ventilator. Lowering the level of spontaneous effort and/or converting solid-like to fluid-like lung might render spontaneous effort noninjurious. To determine whether spontaneous effort increases dependent lung injury, and whether such injury would be reduced by recruiting atelectatic solid-like lung with positive end-expiratory pressure (PEEP). Established models of severe ARDS (rabbit, pig) were used. Regional histology (rabbit), inflammation (positron emission tomography; pig), regional inspiratory Ppl (intrabronchial balloon manometry), and stretch (electrical impedance tomography; pig) were measured. Respiratory drive was evaluated in 11 patients with ARDS. Although injury during muscle paralysis was predominantly in nondependent and middle lung regions at low (vs. high) PEEP, strong inspiratory effort increased injury (indicated by positron emission tomography and histology) in dependent lung. Stronger effort (vs. muscle paralysis) caused local overstretch and greater tidal recruitment in dependent lung, where more negative Ppl was localized and greater stretch was generated. In contrast, high PEEP minimized lung injury by more uniformly distributing negative Ppl, and lowering the magnitude of spontaneous effort (i.e., deflection in esophageal pressure observed in rabbits, pigs, and patients). Strong effort increased dependent lung injury, where higher local lung stress and stretch was generated; effort-dependent lung injury was minimized by high PEEP in severe ARDS, which may offset need for paralysis.

Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings

PubMed Central

Zhang, Xinyu; Qin, Jiaqian; Das, Malay Kumar; Hao, Ruru; Zhong, Hua; Thueploy, Adisak; Limpanart, Sarintorn; Boonyongmaneerat, Yuttanant; Ma, Mingzhen; Liu, Riping

2016-01-01

Electroplated hard chrome coating is widely used as a wear resistant coating to prolong the life of mechanical components. However, the electroplating process generates hexavalent chromium ion which is known carcinogen. Hence, there is a major effort throughout the electroplating industry to replace hard chrome coating. Composite coating has been identified as suitable materials for replacement of hard chrome coating, while deposition coating prepared using traditional co-deposition techniques have relatively low particles content, but the content of particles incorporated into a coating may fundamentally affect its properties. In the present work, Ni-W/diamond composite coatings were prepared by sediment co-electrodeposition from Ni-W plating bath, containing suspended diamond particles. This study indicates that higher diamond contents could be successfully co-deposited and uniformly distributed in the Ni-W alloy matrix. The maximum hardness of Ni-W/diamond composite coatings is found to be 2249 ± 23 Hv due to the highest diamond content of 64 wt.%. The hardness could be further enhanced up to 2647 ± 25 Hv with heat treatment at 873 K for 1 h in Ar gas, which is comparable to hard chrome coatings. Moreover, the addition of diamond particles could significantly enhance the wear resistance of the coatings. PMID:26924136

Responding to the call for globalization in nursing education: the implementation of the transatlantic double-degree program.

PubMed

Hornberger, Cynthia A; Erämaa, Sirkka; Helembai, Kornélia; McCartan, Patrick J; Turtiainen, Tarja

2014-01-01

Increased demand for nurses worldwide has highlighted the need for a flexible nursing workforce eligible for licensure in multiple countries. Nursing's curricular innovation mirrors the call for reform within higher education including globalization of curricula (E. J. S. Hovenga, 2004; D. Nayyar, 2008; B. J. G. Wood, S. M. Tapsall, & G. N. Soutar, 2005), increased opportunities for student mobility exchanges, dialogue between different academic traditions, and mutual understanding and transparency between universities (J. González & R. Wagenaar, 2005). The European Union (EU) and United States have combined efforts to achieve these objectives by creating the Atlantis program in 2007 (U.S. Department of Education, 2011). This article describes experiences of four nursing programs participating in an Atlantis project to develop a double-degree baccalaureate program for undergraduate nursing students. Early learnings include increasing awareness and appreciation of essential curricular and performance competencies of the baccalaureate-prepared professional nurse. Challenges include language competency; variations in curriculum, cultural norms, student expectations, and learning assessment; and philosophical differences regarding first-level professional nurse preparation as specialist versus generalist. The Transatlantic Double Degree program has successfully implemented the double-degree program. Members have gained valuable insights into key issues surrounding the creation of a more uniform, yet flexible, educational standard between our countries. © 2014.

The business of genomic testing: a survey of early adopters.

PubMed

Crawford, James M; Bry, Lynn; Pfeifer, John; Caughron, Samuel K; Black-Schaffer, Stephen; Kant, Jeffrey A; Kaufman, Jill H

2014-12-01

The practice of "genomic" (or "personalized") medicine requires the availability of appropriate diagnostic testing. Our study objective was to identify the reasons for health systems to bring next-generation sequencing into their clinical laboratories and to understand the process by which such decisions were made. Such information may be of value to other health systems seeking to provide next-generation sequencing testing to their patient populations. A standardized open-ended interview was conducted with the laboratory medical directors and/or department of pathology chairs of 13 different academic institutions in 10 different states. Genomic testing for cancer dominated the institutional decision making, with three primary reasons: more effective delivery of cancer care, the perceived need for institutional leadership in the field of genomics, and the premise that genomics will eventually be cost-effective. Barriers to implementation included implementation cost; the time and effort needed to maintain this newer testing; challenges in interpreting genetic variants; establishing the bioinformatics infrastructure; and curating data from medical, ethical, and legal standpoints. Ultimate success depended on alignment with institutional strengths and priorities and working closely with institutional clinical programs. These early adopters uniformly viewed genomic analysis as an imperative for developing their expertise in the implementation and practice of genomic medicine.

The decline of religious holidays in old regime France (1642-1789).

PubMed

Shusterman, Noah

2009-01-01

Under the ancien régime individual bishops decided which official religious holidays, or fêtes chômées, were observed in their dioceses. In the early seventeenth century there were on average 33 weekdays per year devoted to these holidays, but their number and choice varied widely across the country. From the mid-seventeenth century onwards French bishops began to eliminate many of these holidays, which were associated with drinking and idleness rather than with pious behaviour. These reforms initially encountered opposition from powerful interests in society, which limited their impact, but subsequently, and particularly after the mid-eighteenth century, the bishops' efforts were much more successful. By the end of the Old Regime the number of weekdays devoted to fêtes chômées had declined to fewer than 20 in most of France. The process of reform also standardized religious practice as the same days were observed throughout the kingdom. Despite the royal government's lack of interest in the matter, a more uniform set of liturgical holidays replaced the regional diversity that had previously existed. The reformed ecclesiastical calendars were more closely geared to the seasonal pattern of agricultural labour and also reflected the Christocentrism of Tridentine Catholicism.

Child health in complex emergencies.

PubMed Central

Moss, William J.; Ramakrishnan, Meenakshi; Storms, Dory; Henderson Siegle, Anne; Weiss, William M.; Lejnev, Ivan; Muhe, Lulu

2006-01-01

Coordinated and effective interventions are critical for relief efforts to be successful in addressing the health needs of children in situations of armed conflict, population displacement, and/or food insecurity. We reviewed published literature and surveyed international relief organizations engaged in child health activities in complex emergencies. Our aim was to identify research needs and improve guidelines for the care of children. Much of the literature details the burden of disease and the causes of morbidity and mortality; few interventional studies have been published. Surveys of international relief organizations showed that most use World Health Organization (WHO), United Nations Children's Fund (UNICEF), and ministry of health guidelines designed for use in stable situations. Organizations were least likely to have formal guidelines on the management of asphyxia, prematurity, and infection in neonates; diagnosis and management of children with human immunodeficiency virus (HIV) infection; active case-finding and treatment of tuberculosis; paediatric trauma; and the diagnosis and management of mental-health problems in children. Guidelines often are not adapted to the different types of health-care workers who provide care in complex emergencies. Evidence-based, locally adapted guidelines for the care of children in complex emergencies should be adopted by ministries of health, supported by WHO and UNICEF, and disseminated to international relief organizations to ensure appropriate, effective, and uniform care. PMID:16501716

Suppression (but Not Reappraisal) Impairs Subsequent Error Detection: An ERP Study of Emotion Regulation's Resource-Depleting Effect

PubMed Central

Wang, Yan; Yang, Lixia; Wang, Yan

2014-01-01

Past event-related potentials (ERPs) research shows that, after exerting effortful emotion inhibition, the neural correlates of performance monitoring (e.g. error-related negativity) were weakened. An undetermined issue is whether all forms of emotion regulation uniformly impair later performance monitoring. The present study compared the cognitive consequences of two emotion regulation strategies, namely suppression and reappraisal. Participants were instructed to suppress their emotions while watching a sad movie, or to adopt a neutral and objective attitude toward the movie, or to just watch the movie carefully. Then after a mood scale, all participants completed an ostensibly unrelated Stroop task, during which ERPs (i.e. error-related negativity (ERN), post-error positivity (Pe) and N450) were obtained. Reappraisal group successfully decreased their sad emotion, relative to the other two groups. Compared with participants in the control group and the reappraisal group, those who suppressed their emotions during the sad movie showed reduced ERN after error commission. Participants in the suppression group also made more errors in incongruent Stroop trials than the other two groups. There were no significant main effects or interactions of group for reaction time, Pe and N450. Results suggest that reappraisal is both more effective and less resource-depleting than suppression. PMID:24777113

Contribution of hot-melt extrusion technology to advance drug delivery in the 21st century.

PubMed

Tiwari, Roshan V; Patil, Hemlata; Repka, Michael A

2016-01-01

Hot-melt extrusion (HME) technology is applied successfully in the plastic, rubber and food industry. HME has also emerged as an important technology for drug delivery applications in pharmaceutical research and manufacturing because of its process automation and low-cost scale-up properties, which reduce labor costs and capital investment. There are a number of commercial FDA-approved HME-derived products, signifying the commercial feasibility of this novel technique in drug delivery applications. HME is a highly efficient, solvent-free continuous processing technique for the development of solid dispersions; thus, research efforts to develop sustained, modified and targeted drug delivery systems to improve the solubility and bioavailability of poorly water-soluble active pharmaceutical ingredients (APIs) are of interest. This review focuses on both the innovations and applications of HME in the production of pharmaceutical formulations, and on the significant findings of the general principles regarding formulation and process development via HME as described in published articles. Challenges faced by pharmaceutical companies to produce efficient drug formulations may be partly overcome by HME's advantages - high drug-loading capacity, good content uniformity, cost-effectiveness, and ease of processing scale-up. Nevertheless, HME's high processing temperatures may be an obstacle if adequate knowledge about the product's formulation is lacking.

Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings.

PubMed

Zhang, Xinyu; Qin, Jiaqian; Das, Malay Kumar; Hao, Ruru; Zhong, Hua; Thueploy, Adisak; Limpanart, Sarintorn; Boonyongmaneerat, Yuttanant; Ma, Mingzhen; Liu, Riping

2016-02-29

Electroplated hard chrome coating is widely used as a wear resistant coating to prolong the life of mechanical components. However, the electroplating process generates hexavalent chromium ion which is known carcinogen. Hence, there is a major effort throughout the electroplating industry to replace hard chrome coating. Composite coating has been identified as suitable materials for replacement of hard chrome coating, while deposition coating prepared using traditional co-deposition techniques have relatively low particles content, but the content of particles incorporated into a coating may fundamentally affect its properties. In the present work, Ni-W/diamond composite coatings were prepared by sediment co-electrodeposition from Ni-W plating bath, containing suspended diamond particles. This study indicates that higher diamond contents could be successfully co-deposited and uniformly distributed in the Ni-W alloy matrix. The maximum hardness of Ni-W/diamond composite coatings is found to be 2249 ± 23 Hv due to the highest diamond content of 64 wt.%. The hardness could be further enhanced up to 2647 ± 25 Hv with heat treatment at 873 K for 1 h in Ar gas, which is comparable to hard chrome coatings. Moreover, the addition of diamond particles could significantly enhance the wear resistance of the coatings.

Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings

NASA Astrophysics Data System (ADS)

Zhang, Xinyu; Qin, Jiaqian; Das, Malay Kumar; Hao, Ruru; Zhong, Hua; Thueploy, Adisak; Limpanart, Sarintorn; Boonyongmaneerat, Yuttanant; Ma, Mingzhen; Liu, Riping

2016-02-01

Electroplated hard chrome coating is widely used as a wear resistant coating to prolong the life of mechanical components. However, the electroplating process generates hexavalent chromium ion which is known carcinogen. Hence, there is a major effort throughout the electroplating industry to replace hard chrome coating. Composite coating has been identified as suitable materials for replacement of hard chrome coating, while deposition coating prepared using traditional co-deposition techniques have relatively low particles content, but the content of particles incorporated into a coating may fundamentally affect its properties. In the present work, Ni-W/diamond composite coatings were prepared by sediment co-electrodeposition from Ni-W plating bath, containing suspended diamond particles. This study indicates that higher diamond contents could be successfully co-deposited and uniformly distributed in the Ni-W alloy matrix. The maximum hardness of Ni-W/diamond composite coatings is found to be 2249 ± 23 Hv due to the highest diamond content of 64 wt.%. The hardness could be further enhanced up to 2647 ± 25 Hv with heat treatment at 873 K for 1 h in Ar gas, which is comparable to hard chrome coatings. Moreover, the addition of diamond particles could significantly enhance the wear resistance of the coatings.

Suppression (but not reappraisal) impairs subsequent error detection: an ERP study of emotion regulation's resource-depleting effect.

PubMed

Wang, Yan; Yang, Lixia; Wang, Yan

2014-01-01

Past event-related potentials (ERPs) research shows that, after exerting effortful emotion inhibition, the neural correlates of performance monitoring (e.g. error-related negativity) were weakened. An undetermined issue is whether all forms of emotion regulation uniformly impair later performance monitoring. The present study compared the cognitive consequences of two emotion regulation strategies, namely suppression and reappraisal. Participants were instructed to suppress their emotions while watching a sad movie, or to adopt a neutral and objective attitude toward the movie, or to just watch the movie carefully. Then after a mood scale, all participants completed an ostensibly unrelated Stroop task, during which ERPs (i.e. error-related negativity (ERN), post-error positivity (Pe) and N450) were obtained. Reappraisal group successfully decreased their sad emotion, relative to the other two groups. Compared with participants in the control group and the reappraisal group, those who suppressed their emotions during the sad movie showed reduced ERN after error commission. Participants in the suppression group also made more errors in incongruent Stroop trials than the other two groups. There were no significant main effects or interactions of group for reaction time, Pe and N450. Results suggest that reappraisal is both more effective and less resource-depleting than suppression.

Soil Management for Hardwood Production

Treesearch

W. M. Broadfoot; B. G. Blackmon; J. B. Baker

1971-01-01

Soil management is the key to successful hardwood management because soil properties are probably the most important determinants of forest productivity. Because of the lack of soil uniformity, however, many foresters have become frustrated with attempts to relate soil to satisfactory growth. Since soil scientists have been unable to predict site quality for trees in...

Carbon nanotube-polymer composite actuators

DOEpatents

Gennett, Thomas [Denver, CO; Raffaelle, Ryne P [Honeoye Falls, NY; Landi, Brian J [Rochester, NY; Heben, Michael J [Denver, CO

2008-04-22

The present invention discloses a carbon nanotube (SWNT)-polymer composite actuator and method to make such actuator. A series of uniform composites was prepared by dispersing purified single wall nanotubes with varying weight percents into a polymer matrix, followed by solution casting. The resulting nanotube-polymer composite was then successfully used to form a nanotube polymer actuator.

Activities That Increase Germination and Establishment of Longleaf Pine Seedlings in Containers

Treesearch

James P. Barnett

2002-01-01

Critical to the successful production of longleaf pine (Pinus palustris Mill.) container stock is use of high quality seeds that are properly prepared and sown. Uniformity in germination and establishment in containers makes nursery production easier and more profitable for the grower. Activities that affect seedling performance include: time of seed...

High-Quality Metal–Organic Framework ZIF-8 Membrane Supported on Electrodeposited ZnO/2-methylimidazole Nanocomposite: Efficient Adsorbent for the Enrichment of Acidic Drugs

PubMed Central

Wu, Mian; Ye, Huili; Zhao, Faqiong; Zeng, Baizhao

2017-01-01

Metal–organic framework (MOF) membranes have received increasing attention as adsorbents, yet the defects in most membrane structures greatly thwart their capacity performance. In this work, we fabricated a novel ZnO/2-methylimidazole nanocomposite with multiple morphology by electrochemical method. The nanocomposite provided sufficient and strong anchorages for the zeolitic imidazolate frameworks-8 (ZIF-8) membrane. Thus, a crack-free and uniform MOF membrane with high performance was successfully obtained. In this case, 2-methylimidazole was believed to react with ZnO to form uniform ZIF nuclei, which induced and guided the growth of ZIF-8 membrane. The as-prepared ZIF-8 membrane had large surface area and good thermal stability. As expected, it displayed high adsorption capacity for acidic drugs (e.g., ibuprofen, ketoprofen and acetylsalicylic acid) as they could interact through hydrophobic, hydrogen bonding and π-π stacking interaction. Accordingly, by coupling with gas chromatography the ZIF-8 membrane was successfully applied to the real-time dynamic monitoring of ibuprofen in patient’s urine. PMID:28051129

Energy Efficient Real-Time Scheduling Using DPM on Mobile Sensors with a Uniform Multi-Cores

PubMed Central

Kim, Youngmin; Lee, Chan-Gun

2017-01-01

In wireless sensor networks (WSNs), sensor nodes are deployed for collecting and analyzing data. These nodes use limited energy batteries for easy deployment and low cost. The use of limited energy batteries is closely related to the lifetime of the sensor nodes when using wireless sensor networks. Efficient-energy management is important to extending the lifetime of the sensor nodes. Most effort for improving power efficiency in tiny sensor nodes has focused mainly on reducing the power consumed during data transmission. However, recent emergence of sensor nodes equipped with multi-cores strongly requires attention to be given to the problem of reducing power consumption in multi-cores. In this paper, we propose an energy efficient scheduling method for sensor nodes supporting a uniform multi-cores. We extend the proposed T-Ler plane based scheduling for global optimal scheduling of a uniform multi-cores and multi-processors to enable power management using dynamic power management. In the proposed approach, processor selection for a scheduling and mapping method between the tasks and processors is proposed to efficiently utilize dynamic power management. Experiments show the effectiveness of the proposed approach compared to other existing methods. PMID:29240695

Development of Ordered, Porous (Sub-25 nm Dimensions) Surface Membrane Structures Using a Block Copolymer Approach.

PubMed

Ghoshal, Tandra; Holmes, Justin D; Morris, Michael A

2018-05-08

In an effort to develop block copolymer lithography to create high aspect vertical pore arrangements in a substrate surface we have used a microphase separated poly(ethylene oxide) -b- polystyrene (PEO-b-PS) block copolymer (BCP) thin film where (and most unusually) PS not PEO is the cylinder forming phase and PEO is the majority block. Compared to previous work, we can amplify etch contrast by inclusion of hard mask material into the matrix block allowing the cylinder polymer to be removed and the exposed substrate subject to deep etching thereby generating uniform, arranged, sub-25 nm cylindrical nanopore arrays. Briefly, selective metal ion inclusion into the PEO matrix and subsequent processing (etch/modification) was applied for creating iron oxide nanohole arrays. The oxide nanoholes (22 nm diameter) were cylindrical, uniform diameter and mimics the original BCP nanopatterns. The oxide nanohole network is demonstrated as a resistant mask to fabricate ultra dense, well ordered, good sidewall profile silicon nanopore arrays on substrate surface through the pattern transfer approach. The Si nanopores have uniform diameter and smooth sidewalls throughout their depth. The depth of the porous structure can be controlled via the etch process.

Window Dressing or Transformation? Intercultural Education Influenced by Globalization and Neoliberalism in a Secondary School in the Canary Islands, Spain

ERIC Educational Resources Information Center

Perez, Lidia Cabrera; Montero-Sieburth, Martha; Gonzalez, Elisa Trujillo

2012-01-01

This article profiles intercultural education efforts at schools on the Canary Islands. After a brief profile of this autonomous community of Spain, descriptions of national efforts to promote intercultural education as they are enacted in one particular school setting are provided. Successes and limitations of these efforts are detailed.…

Comparative study of soft thermal printing and lamination of dry thick photoresist films for the uniform fabrication of polymer MOEMS on small-sized samples

NASA Astrophysics Data System (ADS)

Abada, S.; Salvi, L.; Courson, R.; Daran, E.; Reig, B.; Doucet, J. B.; Camps, T.; Bardinal, V.

2017-05-01

A method called ‘soft thermal printing’ (STP) was developed to ensure the optimal transfer of 50 µm-thick dry epoxy resist films (DF-1050) on small-sized samples. The aim was the uniform fabrication of high aspect ratio polymer-based MOEMS (micro-optical-electrical-mechanical system) on small and/or fragile samples, such as GaAs. The printing conditions were optimized, and the resulting thickness uniformity profiles were compared to those obtained via lamination and SU-8 standard spin-coating. Under the best conditions tested, STP and lamination produced similar results, with a maximum deviation to the central thickness of 3% along the sample surface, compared to greater than 40% for SU-8 spin-coating. Both methods were successfully applied to the collective fabrication of DF1050-based MOEMS designed for the dynamic focusing of VCSELs (vertical-cavity surface-emitting lasers). Similar, efficient electro-thermo-mechanical behaviour was obtained in both cases.

Chemical Sintering Generates Uniform Porous Hyaluronic Acid Hydrogels

PubMed Central

Cam, Cynthia; Segura, Tatiana

2014-01-01

Implantation of scaffolds for tissue repair has been met with limited success primarily due to the inability to achieve vascularization within the construct. Many strategies have shifted to incorporate pores into these scaffolds to encourage rapid cellular infiltration and subsequent vascular ingrowth. We utilized an efficient chemical sintering technique to create a uniform network of polymethyl methacrylate (PMMA) microspheres for porous hyaluronic acid hydrogel formation. The porous hydrogels generated from chemical sintering possessed comparable pore uniformity and interconnectivity as the commonly used non- and heat sintering techniques. Moreover, similar cell response to the porous hydrogels generated from each sintering approach was observed in cell viability, spreading, proliferation in vitro, as well as, cellular invasion in vivo. We propose chemical sintering of PMMA microspheres using a dilute acetone solution as an alternative method to generating porous hyaluronic acid hydrogels since it requires equal or ten-fold less processing time as the currently used non-sintering or heat sintering technique, respectively. PMID:24120847

Controllable formation of high density SERS-active silver nanoprism layers on hybrid silica-APTES coatings

NASA Astrophysics Data System (ADS)

Pilipavicius, J.; Kaleinikaite, R.; Pucetaite, M.; Velicka, M.; Kareiva, A.; Beganskiene, A.

2016-07-01

In this work sol-gel process for preparation of the uniform hybrid silica-3-aminopropyltriethoxysilane (APTES) coatings on glass surface is presented from mechanistic point of view. The suggested synthetic approach is straightforward, scalable and provides the means to tune the amount of amino groups on the surface simply by changing concentration of APTES in the initial sol. Deposition rate of different size silver nanoprisms (AgNPRs) on hybrid silica coatings of various amounts of APTES were studied and their performance as SERS materials were probed. The acquired data shows that the deposition rate of AgNPRs can be tuned by changing the amount of APTES. The optimal amount of APTES was found to be crucial for successful AgNPRs assembly and subsequent uniformity of the final SERS substrate-too high APTES content may result in rapid non-stable aggregation and non-uniform assembly process. SERS study revealed that SERS enhancement is the strongest at moderate AgNPRs aggregation level whereas it significantly drops at high aggregation levels.

Design and fabrication of prototype 6×6 cm 2 microchannel plate photodetector with bialkali photocathode for fast timing applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Junqi; Byrum, Karen; Demarteau, Marcel

Planar microchannel plate-based photodetector with bialkali photocathode is capable of fast and accurate time and position resolutions. A new 6 cm x 6 cm photodetector production facility was designed and built at Argonne National Laboratory. Small form-factor MCP-based photodetectors completely constructed of glass were designed and prototypes were successfully fabricated. Knudsen effusion cells were incorporated in the photocathode growth chamber to achieve uniform and high quantum efficiency hotocathodes. The thin film uniformity distribution was simulated and measured for an antimony film deposition, showing uniformity of better than 10%. Several prototype devices with bialkali photocathodes have been fabricated with the describedmore » system and their characteristics were evaluated in the large signal (multi-PE) limit. A typical prototype device exhibits time-of-flight resolution of ~ 27 psec and differential time resolution of ~ 9 psec, corresponding to spatial resolution of ~ 0.65 mm.« less

Improving AIRS Radiance Spectra in High Contrast Scenes Using MODIS

NASA Technical Reports Server (NTRS)

Pagano, Thomas S.; Aumann, Hartmut H.; Manning, Evan M.; Elliott, Denis A.; Broberg, Steven E.

2015-01-01

The Atmospheric Infrared Sounder (AIRS) on the EOS Aqua Spacecraft was launched on May 4, 2002. AIRS acquires hyperspectral infrared radiances in 2378 channels ranging in wavelength from 3.7-15.4 microns with spectral resolution of better than 1200, and spatial resolution of 13.5 km with global daily coverage. The AIRS is designed to measure temperature and water vapor profiles for improvement in weather forecast accuracy and improved understanding of climate processes. As with most instruments, the AIRS Point Spread Functions (PSFs) are not the same for all detectors. When viewing a non-uniform scene, this causes a significant radiometric error in some channels that is scene dependent and cannot be removed without knowledge of the underlying scene. The magnitude of the error depends on the combination of non-uniformity of the AIRS spatial response for a given channel and the non-uniformity of the scene, but is typically only noticeable in about 1% of the scenes and about 10% of the channels. The current solution is to avoid those channels when performing geophysical retrievals. In this effort we use data from the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument to provide information on the scene uniformity that is used to correct the AIRS data. For the vast majority of channels and footprints the technique works extremely well when compared to a Principal Component (PC) reconstruction of the AIRS channels. In some cases where the scene has high inhomogeneity in an irregular pattern, and in some channels, the method can actually degrade the spectrum. Most of the degraded channels appear to be slightly affected by random noise introduced in the process, but those with larger degradation may be affected by alignment errors in the AIRS relative to MODIS or uncertainties in the PSF. Despite these errors, the methodology shows the ability to correct AIRS radiances in non-uniform scenes under some of the worst case conditions and improves the ability to match AIRS and MODIS radiances in non-uniform scenes.

Application of 3D printing to prototype and develop novel plant tissue culture systems.

PubMed

Shukla, Mukund R; Singh, Amritpal S; Piunno, Kevin; Saxena, Praveen K; Jones, A Maxwell P

2017-01-01

Due to the complex process of designing and manufacturing new plant tissue culture vessels through conventional means there have been limited efforts to innovate improved designs. Further, development and availability of low cost, energy efficient LEDs of various spectra has made it a promising light source for plant growth in controlled environments. However, direct replacement of conventional lighting sources with LEDs does not address problems with uniformity, spectral control, or the challenges in conducting statistically valid experiments to assess the effects of light. Prototyping using 3D printing and LED based light sources could help overcome these limitations and lead to improved culture systems. A modular culture vessel design in which the fluence rate and spectrum of light are independently controlled was designed, prototyped using 3D printing, and evaluated for plant growth. This design is compatible with semi-solid and liquid based culture systems. Observations on morphology, chlorophyll content, and chlorophyll fluorescence based stress parameters from in vitro plants cultured under different light spectra with similar overall fluence rate indicated different responses in Nicotiana tabacum and Artemisia annua plantlets. This experiment validates the utility of 3D printing to design and test functional vessels and demonstrated that optimal light spectra for in vitro plant growth is species-specific. 3D printing was successfully used to prototype novel culture vessels with independently controlled variable fluence rate/spectra LED lighting. This system addresses several limitations associated with current lighting systems, providing more uniform lighting and allowing proper replication/randomization for experimental plant biology while increasing energy efficiency. A complete procedure including the design and prototyping of a culture vessel using 3D printing, commercial scale injection molding of the prototype, and conducting a properly replicated experiment are discussed. This open source design has the scope for further improvement and adaptation and demonstrates the power of 3D printing to improve the design of culture systems.

Start-On-The-Part Transient Model for In-Situ Automated Tape Placement of Thermoplastic Composites

NASA Technical Reports Server (NTRS)

Costen, Robert c.; Marchello, Joseph M.

1997-01-01

Fabrication of a complex part by automated tape placement (ATP) can require starting up a new tape-end in the part interior, termed start-on-the-part. Careful thermal management of the starting transient is needed to achieve uniform crystallinity and inter-laminar weld strength - which is the objective of this modeling effort. The transient is modeled by a Fourier-Laplace transform solution of the time-dependent thermal transport equation in two spatial dimensions. The solution is subject to a quasi-steady approximation for the speed and length of the consolidation head. Sample calculations are done for the Langley ATP robot applying PEEK/carbon fiber composite and for two upgrades in robot performance. The head starts out almost at rest which meets an engineering requirement for accurate placement of the new tape-end. The head then rapidly accelerates until it reaches its steady state speed. This rapid acceleration, however, violates the quasi-steady approximation, so uniform weld strength and crystallinity during the starting transient are not actually achieved. The solution does give the elapsed time and distance from start-up to validity of the quasi-steady approximation - which quantifies the length of the non-uniform region. The elapsed time was always less than 0.1 s and the elapsed distance less than 1 cm. This quantification would allow the non-uniform region to be either trimmed away or compensated for in the design of a part. Such compensation would require experiments to measure the degree of non-uniformity, because the solution does not provide this information. The rapid acceleration suggests that the consolidation roller or belt be actively synchronized to avoid abrading the tape.

Causal attribution for success and failure in mathematics among MDAB pre-diploma students

NASA Astrophysics Data System (ADS)

Maidinsah, Hamidah; Embong, Rokiah; Wahab, Zubaidah Abd

2014-07-01

The Program Mengubah Destini Anak Bangsa (MDAB) is a pre-diploma programme catering to SPM school leavers who do not meet the minimum requirement to enter any of UiTM diploma programmes. The study aims to evaluate the perceptions of MDAB students toward the main causal attribution factors underlying students' success and failure in mathematics. Research sample comprised of 482 students from five UiTM branch campuses. Research instrument used was a set of GALUS questionnaire consisting of 36 items based on the Weiner Attribution Theory. Four causal attributions factors for success and failures evaluated are ability, effort, question difficulty and environment. GALUS reliability index was 0.93. The research found that effort appears to be the main causal attribution factor in students' success and failure in mathematics, followed by environment, question difficulty and ability. High achiever students strongly agree that the ability factor influenced their success while low achiever students strongly agree that all attributing factors influenced their failures in mathematics.

A method for reducing the largest relative errors in Monte Carlo iterated-fission-source calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunter, J. L.; Sutton, T. M.

2013-07-01

In Monte Carlo iterated-fission-source calculations relative uncertainties on local tallies tend to be larger in lower-power regions and smaller in higher-power regions. Reducing the largest uncertainties to an acceptable level simply by running a larger number of neutron histories is often prohibitively expensive. The uniform fission site method has been developed to yield a more spatially-uniform distribution of relative uncertainties. This is accomplished by biasing the density of fission neutron source sites while not biasing the solution. The method is integrated into the source iteration process, and does not require any auxiliary forward or adjoint calculations. For a given amountmore » of computational effort, the use of the method results in a reduction of the largest uncertainties relative to the standard algorithm. Two variants of the method have been implemented and tested. Both have been shown to be effective. (authors)« less

Muon g-2 at Fermilab: Magnetic Field Preparations for a New Physics Search

NASA Astrophysics Data System (ADS)

Kiburg, Brendan; Muon g-2 Collaboration

2016-03-01

The Muon g - 2 experiment at Fermilab will measure the muon's anomalous magnetic moment, aμ, to 140 parts-per-billion. Modern calculations for aμ differ from the current experimental value by 3.6 σ. Our effort will test this discrepancy by collecting 20 times more muons and implementing several upgrades to the well-established storage ring technique. The experiment utilizes a superconducting electromagnet with a 7-meter radius and a uniform 1.45-Tesla magnetic field to store ~104 muons at a time. The times, energies, and locations of the subsequent decay positrons are determined and combined with magnetic field measurements to extract aμ. This talk will provide a brief snapshot of the current discrepancy. The role and requirements of the precision magnetic field will be described. Recent progress to establish the required magnetic field uniformity will be highlighted.

WHO WINS THE GAME, SUCCESSFUL PROGRAMS FOR THE DISADVANTAGED.

ERIC Educational Resources Information Center

HAUBRICH, VERNON F.

THE BACKGROUND OF THE FAILURE OF RURAL AND URBAN SLUM SCHOOLS TO PROVIDE SUCCESSFUL PROGRAMS FOR DISADVANTAGED YOUTH IS REVIEWED. A DISCUSSION OF THE SOCIAL-PSYCHOLOGICAL CONDITIONS FOR SUCCESSFUL EFFORTS SHOWS THE IMPORTANCE OF THE INVOLVEMENT OF THE TEACHER, THE PARENT, AND THE COMMUNITY IN THESE PROGRAMS. IT IS FELT THAT ACTIVE TEACHER…

Understanding and Articulating Effective Succession Planning: A Means for Infusing Influence by NAITTE Constituencies

ERIC Educational Resources Information Center

Geroy, Gary D.; Caleb, Denise; Wright, Phillip C.

2005-01-01

Human resource succession planning (HRSP) is "a deliberate and systematic effort by an organization to ensure critical personnel continuity in key positions and encourage individual advancement". Succession planning allows an organization to prepare for the absence, departure, death, retirement, or termination of an individual. It provides for…

Institutional Effectiveness Analysis and Student Goal Attainment in the Community College.

ERIC Educational Resources Information Center

Meyer, Marilyn Wertheimer

In an effort to effect institutional change through an analysis of institutional effectiveness, California's Fresno City College (FCC) undertook a 3-year project to examine student success. In order to determine appropriate measures of and methodologies for improving student success, a Student Success Task was established, developing 13 core…

Facilitating Self-Regulated Learning Skills and Achievement with a Strategic Content Learning Approach

ERIC Educational Resources Information Center

Heller, Monica L.; Marchant, Gregory J.

2015-01-01

Whether out of financial concerns for student retention or altruistic goals involving facilitating successful learning, efforts are being made to ensure college student success beyond chance independent study skills. Students often lack effective self-regulatory skills and study strategies necessary for success in college. With guidance through…

The Relationship between Computational Fluency and Student Success in General Studies Mathematics

ERIC Educational Resources Information Center

Hegeman, Jennifer; Waters, Gavin

2012-01-01

Many developmental mathematics programs emphasize computational fluency with the assumption that this is a necessary contributor to student success in general studies mathematics. In an effort to determine which skills are most essential, scores on a computational fluency test were correlated with student success in general studies mathematics at…

Success Stories 2000. The Success Stories Series.

ERIC Educational Resources Information Center

Southwest Educational Development Laboratory, Austin, TX. National Center for the Dissemination of Disability Research.

The booklet is the first issue of a series that will highlight a variety of successes realized by the National Institute on Disability and Rehabilitation Research (NIDRR) grantees in their dissemination and utilization efforts. This issue focuses upon the status of World Wide Web (WWW) usage among NIDRR grantees. Information is provided on the…

Perceived parental beliefs about the causes of success in sport: relationship to athletes' achievement goals and personal beliefs.

PubMed

White, Sally A; Kavussanu, Maria; Tank, Kari M; Wingate, Jason M

2004-02-01

This study examined the relationship between perceived parental beliefs and young athletes' achievement goal orientations and personal beliefs about the causes of success in sport. Participants were 183 male and female athletes, 11-18 years old, involved in team sports. Athletes completed the Task and Ego Orientation in Sport Questionnaire, the Beliefs about the Causes of Sport Success Questionnaire, and two modified versions of the latter inventory to assess their perceptions of their parents' beliefs. Canonical correlation analysis revealed that perceived parental beliefs were related to goal orientations and personal beliefs in a conceptually coherent fashion. Thus, the perceived parental belief that effort leads to success in sport was related to athletes' task orientation and personal belief that effort causes sport success. In contrast, the perceived parental beliefs that superior ability, external factors, and using deceptive tactics are precursors to success in sport corresponded to athletes' ego orientation and the same personal beliefs. The findings are discussed in terms of their implications for understanding the socialization experiences of young athletes.

"Someone Who Looks Like Me": Promoting the Success of Students of Color by Promoting the Success of Faculty of Color

ERIC Educational Resources Information Center

Benitez, Michael; James, Mary; Joshua, Kazi; Perfetti, Lisa; Vick, S. Brooke

2017-01-01

Despite focused efforts by many colleges and universities, the racial and ethnic composition of college faculty has not increased significantly in more than twenty years. To provide an educational environment that promotes the success of students of color, it is imperative to develop structures that promote the retention and success of faculty of…

Model Checking Verification and Validation at JPL and the NASA Fairmont IV and V Facility

NASA Technical Reports Server (NTRS)

Schneider, Frank; Easterbrook, Steve; Callahan, Jack; Montgomery, Todd

1999-01-01

We show how a technology transfer effort was carried out. The successful use of model checking on a pilot JPL flight project demonstrates the usefulness and the efficacy of the approach. The pilot project was used to model a complex spacecraft controller. Software design and implementation validation were carried out successfully. To suggest future applications we also show how the implementation validation step can be automated. The effort was followed by the formal introduction of the modeling technique as a part of the JPL Quality Assurance process.

Comparing simulated and measured sensible and latent heat fluxes over snow under a pine canopy to improve an energy balance snowmelt model

Treesearch

D. Marks; M. Reba; J. Pomeroy; T. Link; A. Winstral; G. Flerchinger; K. Elder

2008-01-01

During the second year of the NASA Cold Land Processes Experiment (CLPX), an eddy covariance (EC) system was deployed at the Local Scale Observation Site (LSOS) from mid-February to June 2003. The EC system was located beneath a uniform pine canopy, where the trees are regularly spaced and are of similar age and height. In an effort to evaluate the turbulent flux...

2008 Post-Election Voting Survey of Local Election Officials: Statistical Methodology Report

DTIC Science & Technology

2009-08-01

Research Fellow. The lead statistician on this survey was Mark Gorsak, supported by Katrina Hsen, Consortium Research Fellow. Jean Fowler performed the...LOCAL ELECTION OFFICIALS Executive Summary The Uniformed and Overseas Citizens Absentee Voting Act of 1986 (UOCAVA), 42 USC 1973ff, permits members of...citizens covered by UOCAVA, (2) to assess the impact of the FVAP’s efforts to simplify and ease the process of voting absentee , (3) to evaluate other

2008 Post-Election Voting Survey of Department of State Voting Assistance Officers: Statistical Methodology Report

DTIC Science & Technology

2009-08-01

Mike Wilson, Westat, Inc. developed weights for this survey. Westat performed data collection and editing. DMDC’s Survey Technology Branch, under...STATISTICAL METHODOLOGY REPORT Executive Summary The Uniformed and Overseas Citizens Absentee Voting Act of 1986 (UOCAVA), 42 USC 1973ff, permits members of...citizens covered by UOCAVA, (2) to assess the impact of the FVAP’s efforts to simplify and ease the process of voting absentee , (3) to evaluate other

Fire investigation

NASA Astrophysics Data System (ADS)

Gomberg, A.

There was considerable progress made on several fronts of fire investigation in the United States in recent years. Progress was made in increasing the quantity of fire investigation and reporting, through efforts to develop the National Fire Incident Reporting System. Improving overall quality of fire investigation is the objective of efforts such as the Fire Investigation Handbook, which was developed and published by the National Bureau of Standards, and the upgrading and expanding of the ""dictionary'' of fire investigation and reporting, the NFPA 901, Uniform Coding for Fire Protection, system. The science of fire investigation as furthered also by new approaches to post fire interviews being developed at the University of Washington, and by in-depth research into factors involved in several large loss fires, including the MGM Grand Hotel in Las Vegas. Finally, the use of special study fire investigations - in-depth investigations concentrating on specific fire problems - is producing new glimpses into the nature of the national fire problem. A brief description of the status of efforts in each of these areas is discussed.

Batch-to-batch uniformity of bacterial community succession and flavor formation in the fermentation of Zhenjiang aromatic vinegar.

PubMed

Wang, Zong-Min; Lu, Zhen-Ming; Yu, Yong-Jian; Li, Guo-Quan; Shi, Jin-Song; Xu, Zheng-Hong

2015-09-01

Solid-state fermentation of traditional Chinese vinegar is a mixed-culture refreshment process that proceeds for many centuries without spoilage. Here, we investigated bacterial community succession and flavor formation in three batches of Zhenjiang aromatic vinegar using pyrosequencing and metabolomics approaches. Temporal patterns of bacterial succession in the Pei (solid-state vinegar culture) showed no significant difference (P > 0.05) among three batches of fermentation. In all the batches investigated, the average number of community operational taxonomic units (OTUs) decreased dramatically from 119 ± 11 on day 1 to 48 ± 16 on day 3, and then maintained in the range of 61 ± 9 from day 5 to the end of fermentation. We confirmed that, within a batch of fermentation process, the patterns of bacterial diversity between the starter (took from the last batch of vinegar culture on day 7) and the Pei on day 7 were similar (90%). The relative abundance dynamics of two dominant members, Lactobacillus and Acetobacter, showed high correlation (coefficient as 0.90 and 0.98 respectively) among different batches. Furthermore, statistical analysis revealed dynamics of 16 main flavor metabolites were stable among different batches. The findings validate the batch-to-batch uniformity of bacterial community succession and flavor formation accounts for the quality of Zhenjiang aromatic vinegar. Based on our understanding, this is the first study helps to explain the rationality of age-old artistry from a scientific perspective. Copyright © 2015 Elsevier Ltd. All rights reserved.

Collaboration in Arctic Research: Best Practices to Build and Sustain Successful Cross- and Trans-disciplinary Efforts

NASA Astrophysics Data System (ADS)

Wiggins, H. V.; Rich, R. H.

2015-12-01

The rapid physical and social changes currently underway in the Arctic - and changes in the way in which we study and manage the region -- require coordinated research efforts to improve our understanding of the Arctic's physical, biological, and social systems and the implications of change at many scales. At the same time, policy-makers and Arctic communities need decision-support tools and synthesized information to respond and adapt to the "new Arctic". There are enormous challenges, however, in collaboration among the disparate groups of people needed for such efforts. A carefully planned strategic approach is required to bridge the scientific disciplinary and organizational boundaries, foster cooperation between local communities and science programs, and effectively communicate between scientists and policy-makers. Efforts must draw on bodies of knowledge from project management, strategic planning, organizational development, and group dynamics. This poster presentation will discuss best practices of building and sustaining networks of people to catalyze successful cross-disciplinary activities. Specific examples and case studies - both successes and failures -- will be presented that draw on several projects at the Arctic Research Consortium of the U.S. (ARCUS; www.arcus.org), a nonprofit membership organization composed of universities and institutions that have a substantial commitment to research in the Arctic.

Dynamic federation of grid and cloud storage

NASA Astrophysics Data System (ADS)

Furano, Fabrizio; Keeble, Oliver; Field, Laurence

2016-09-01

The Dynamic Federations project ("Dynafed") enables the deployment of scalable, distributed storage systems composed of independent storage endpoints. While the Uniform Generic Redirector at the heart of the project is protocol-agnostic, we have focused our effort on HTTP-based protocols, including S3 and WebDAV. The system has been deployed on testbeds covering the majority of the ATLAS and LHCb data, and supports geography-aware replica selection. The work done exploits the federation potential of HTTP to build systems that offer uniform, scalable, catalogue-less access to the storage and metadata ensemble and the possibility of seamless integration of other compatible resources such as those from cloud providers. Dynafed can exploit the potential of the S3 delegation scheme, effectively federating on the fly any number of S3 buckets from different providers and applying a uniform authorization to them. This feature has been used to deploy in production the BOINC Data Bridge, which uses the Uniform Generic Redirector with S3 buckets to harmonize the BOINC authorization scheme with the Grid/X509. The Data Bridge has been deployed in production with good results. We believe that the features of a loosely coupled federation of open-protocolbased storage elements open many possibilities of smoothly evolving the current computing models and of supporting new scientific computing projects that rely on massive distribution of data and that would appreciate systems that can more easily be interfaced with commercial providers and can work natively with Web browsers and clients.

Collecting and Reporting P2 Results: Regional Measurement Guidance

EPA Pesticide Factsheets

Measuring results is an essential component of any successful P2 program and is one way to determine the success of a technical assistance or training effort. This PDF defines some terms of P2 measurement.

Promotion and advocacy for improved complementary feeding: can we apply the lessons learned from breastfeeding?

PubMed

Piwoz, Ellen G; Huffman, Sandra L; Quinn, Victoria J

2003-03-01

Although many successes have been achieved in promoting breastfeeding, this has not been the case for complementary feeding. Some successes in promoting complementary feeding at the community level have been documented, but few of these efforts have expanded to a larger scale and become sustained. To discover the reasons for this difference, the key factors for the successful promotion of breastfeeding on a large scale were examined and compared with the efforts made in complementary feeding. These factors include definition and rationale, policy support, funding, advocacy, private-sector involvement, availability and use of monitoring data, integration of research into action, and the existence of a well-articulated series of steps for successful implementation. The lessons learned from the promotion of breastfeeding should be applied to complementary feeding, and the new Global Strategy for Infant and Young Child Feeding provides an excellent first step in this process.

Enhancing Student Success in Biology, Chemistry, and Physics by Transforming the Faculty Culture

NASA Astrophysics Data System (ADS)

Jackson, Howard; Smith, Leigh; Koenig, Kathleen; Beyette, Jill; Kinkle, Brian; Vonderheide, Anne

We present preliminary results of an effort to enhance undergraduate student success in the STEM disciplines. We explore a multistep approach that reflects recent literature and report initial results by each of the Departments of Biology, Chemistry, and Physics of implementing several change strategies. The central elements of our approach involve identified departmental Teaching and Learning Liaisons, a unique faculty development component by our teaching center, a vertical integration of leadership across department heads, the Dean, and the Provost, and the explicit acknowledgement that change happens locally. Teaching and Learning lunches across the departments have attracted an attendance of ~65% of the faculty. The use of Learning Assistants in classrooms has also increased sharply. Modest changes in the student success rates have been observed. These efforts and others at the decanal and provostal levels promise changes in student success. We acknowledge the financial support of the National Science Foundation through DUE 1544001 and 1431350.

Strategic Marketing for Presidents.

ERIC Educational Resources Information Center

Pappas, Richard J., Ed.

Designed to inform the marketing efforts of community college presidents, this document describes the importance of marketing, presents a targeted approach, and outlines the specific roles and skills needed by the president to ensure successful efforts and effective institutions. The first chapter, "Developing a Marketing-Strategic…

Encouraging staff involvement in the security effort.

PubMed

Hudson, Gary A

2006-01-01

Developing greater rapport between the security department and other hospital employees is essential to a successful security effort. In this article, the author describes a number of methods which can be used to better integrate the security program into the culture of the hospital.

Health Reform Redux: Learning From Experience and Politics

PubMed Central

2009-01-01

The 2008 presidential campaign season featured health care reform proposals. I discuss 3 approaches to health care reform and the tools for bringing about reform, such as insurance market reforms, tax credits, subsidies, individual and employer mandates, and public program expansions. I also discuss the politics of past and current health care reform efforts. Market-based reforms and mandates have been less successful than public program expansions at expanding coverage and controlling costs. New divisions among special interest groups increase the likelihood that reform efforts will succeed. Federal support for state efforts may be necessary to achieve national health care reform. History suggests that state-level success precedes national reform. History also suggests that an organized social movement for reform is necessary to overcome opposition from special interest groups. PMID:19299668

Analytic approximations of Von Kármán plate under arbitrary uniform pressure—equations in integral form

NASA Astrophysics Data System (ADS)

Zhong, XiaoXu; Liao, ShiJun

2018-01-01

Analytic approximations of the Von Kármán's plate equations in integral form for a circular plate under external uniform pressure to arbitrary magnitude are successfully obtained by means of the homotopy analysis method (HAM), an analytic approximation technique for highly nonlinear problems. Two HAM-based approaches are proposed for either a given external uniform pressure Q or a given central deflection, respectively. Both of them are valid for uniform pressure to arbitrary magnitude by choosing proper values of the so-called convergence-control parameters c 1 and c 2 in the frame of the HAM. Besides, it is found that the HAM-based iteration approaches generally converge much faster than the interpolation iterative method. Furthermore, we prove that the interpolation iterative method is a special case of the first-order HAM iteration approach for a given external uniform pressure Q when c 1 = - θ and c 2 = -1, where θ denotes the interpolation iterative parameter. Therefore, according to the convergence theorem of Zheng and Zhou about the interpolation iterative method, the HAM-based approaches are valid for uniform pressure to arbitrary magnitude at least in the special case c 1 = - θ and c 2 = -1. In addition, we prove that the HAM approach for the Von Kármán's plate equations in differential form is just a special case of the HAM for the Von Kármán's plate equations in integral form mentioned in this paper. All of these illustrate the validity and great potential of the HAM for highly nonlinear problems, and its superiority over perturbation techniques.

Hardware-in-the-loop projector system for light detection and ranging sensor testing

NASA Astrophysics Data System (ADS)

Kim, Hajin J.; Naumann, Charles B.; Cornell, Michael C.

2012-08-01

Efforts in developing a synthetic environment for testing light detection and ranging (LADAR) sensors in a hardware-in-the-loop simulation are continuing at the Aviation and Missile Research, Engineering, and Development Center of the U.S. Army Research, Engineering and Development Command (RDECOM). Current activities have concentrated on evaluating the optical projection techniques for the LADAR synthetic environment. Schemes for generating the optical signals representing the individual pixels of the projection are of particular interest. Several approaches have been investigated and tested with emphasis on operating wavelength, intensity dynamic range and uniformity, and flexibility in pixel waveform generation. This paper will discuss some of the results from these current efforts at RDECOM's System Simulation and Development Directorate's Electro Optical Technology Development Laboratory.

Mechanical Behavior of Additively Manufactured Uranium-6 wt. pct. Niobium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, A. S.; Wraith, M. W.; Burke, S. C.

This report describes an effort to process uranium-6 weight% niobium using laser powder bed fusion. The chemistry, crystallography, microstructure and mechanical response resulting from this process are discussed with particular emphasis on the effect of the laser powder bed fusion process on impurities. In an effort to achieve homogenization and uniform mechanical behavior from different builds, as well as to induce a more conventional loading response, we explore post-processing heat treatments on this complex alloy. Elevated temperature heat treatment for recrystallization is evaluated and the effect of recrystallization on mechanical behavior in laser powder bed fusion processed U-6Nb is discussed.more » Wrought-like mechanical behavior and grain sizes are achieved through post-processing and are reported herein.« less

Has the DOTS Strategy Improved Case Finding or Treatment Success? An Empirical Assessment

PubMed Central

Obermeyer, Ziad; Abbott-Klafter, Jesse; Murray, Christopher J. L.

2008-01-01

Background Nearly fifteen years after the start of WHO's DOTS strategy, tuberculosis remains a major global health problem. Given the lack of empirical evidence that DOTS reduces tuberculosis burden, considerable debate has arisen about its place in the future of global tuberculosis control efforts. An independent evaluation of DOTS, one of the most widely-implemented and longest-running interventions in global health, is a prerequisite for meaningful improvements to tuberculosis control efforts, including WHO's new Stop TB Strategy. We investigate the impact of the expansion of the DOTS strategy on tuberculosis case finding and treatment success, using only empirical data. Methods and Findings We study the effect of DOTS using time-series cross-sectional methods. We first estimate the impact of DOTS expansion on case detection, using reported case notification data and controlling for other determinants of change in notifications, including HIV prevalence, GDP, and country-specific effects. We then estimate the effect of DOTS expansion on treatment success. DOTS programme variables had no statistically significant impact on case detection in a wide range of models and specifications. DOTS population coverage had a significant effect on overall treatment success rates, such that countries with full DOTS coverage benefit from at least an 18% increase in treatment success (95% CI: 5–31%). Conclusions The DOTS technical package improved overall treatment success. By contrast, DOTS expansion had no effect on case detection. This finding is less optimistic than previous analyses. Better epidemiological and programme data would facilitate future monitoring and evaluation efforts. PMID:18320042

Successful malaria elimination in the Ecuador-Peru border region: epidemiology and lessons learned.

PubMed

Krisher, Lyndsay K; Krisher, Jesse; Ambuludi, Mariano; Arichabala, Ana; Beltrán-Ayala, Efrain; Navarrete, Patricia; Ordoñez, Tania; Polhemus, Mark E; Quintana, Fernando; Rochford, Rosemary; Silva, Mercy; Bazo, Juan; Stewart-Ibarra, Anna M

2016-11-28

In recent years, malaria (Plasmodium vivax and Plasmodium falciparum) has been successfully controlled in the Ecuador-Peru coastal border region. The aim of this study was to document this control effort and to identify the best practices and lessons learned that are applicable to malaria control and to other vector-borne diseases. A proximal outcome evaluation was conducted of the robust elimination programme in El Oro Province, Ecuador, and the Tumbes Region, Peru. Data collection efforts included a series of workshops with local public health experts who played central roles in the elimination effort, review of epidemiological records from Ministries of Health, and a review of national policy documents. Key programmatic and external factors are identified that determined the success of this eradication effort. From the mid 1980s until the early 2000s, the region experienced a surge in malaria transmission, which experts attributed to a combination of ineffective anti-malarial treatment, social-ecological factors (e.g., El Niño, increasing rice farming, construction of a reservoir), and political factors (e.g., reduction in resources and changes in management). In response to the malaria crisis, local public health practitioners from El Oro and Tumbes joined together in the mid-1990s to forge an unofficial binational collaboration for malaria control. Over the next 20 years, they effectively eradicated malaria in the region, by strengthening surveillance and treatment strategies, sharing of resources, operational research to inform policy, and novel interventions. The binational collaboration at the operational level was the fundamental component of the successful malaria elimination programme. This unique relationship created a trusting, open environment that allowed for flexibility, rapid response, innovation and resilience in times of crisis, and ultimately a sustainable control programme. Strong community involvement, an extensive microscopy network and ongoing epidemiologic investigations at the local level were also identified as crucial programmatic strategies. The results of this study provide key principles of a successful malaria elimination programme that can inform the next generation of public health professionals in the region, and serve as a guide to ongoing and future control efforts of other emerging vector borne diseases globally.

Collaborative Research on and Successful Implementation of Factory-Level Repellent-Treated Marine Corps Combat Utility Uniforms from 2004-2007

USDA-ARS?s Scientific Manuscript database

In August, 2003, a mission to protect an airfield in Monrovia, Liberia failed after 80 of 150 multi-force personnel were infected with the malaria parasite. Over 70 of these personnel were United States Marines. In October, 2003, the representatives from the U.S. Marine Corps requested assistance ...

Producing high-quality slash pine seeds

Treesearch

James Barnett; Sue Varela

2003-01-01

Slash pine is a desirable species. It serves many purposes and is well adapted to poorly drained flatwoods and seasonally flooded areas along the lower Coastal Plain of the Southeastern US. The use of high-quality seeds has been shown to produce uniform seedlings for outplanting, which is key to silvicultural success along the Coastal Plain and elsewhere. We present...

A green surfactant-assisted synthesis of hierarchical TS-1 zeolites with excellent catalytic properties for oxidative desulfurization.

PubMed

Du, Shuting; Li, Fen; Sun, Qiming; Wang, Ning; Jia, Mingjun; Yu, Jihong

2016-02-25

Hierarchical TS-1 zeolites with uniform intracrystalline mesopores have been successfully synthesized through the hydrothermal method by using the green and cheap surfactant Triton X-100 as the mesoporous template. The resultant materials exhibit remarkably enhanced catalytic activity in oxidative desulfurization reactions compared to the conventional TS-1 zeolite.

Steam-bending properties of southern pine

Treesearch

Truett J. Lemoine; Peter Koch

1971-01-01

Southern pine wood can be successfully steam-bent if the bending jig incorporates a flexible metal bending strap together with a mechanism to apply a uniform end compression load during the bending operation. With clear, 1/2- and 1-inch-thick southern pine at 17-percent moisture content, highest bending rating where obtained with fast-grown, vertical-grain, low-density...

Cellulose nanocrystals as a reinforcing material for electrospun poly(methyl methacrylate) fibers: formation, properties and nanomechanical characterization

Treesearch

Hong Dong; Kenneth E. Strawhecker; James A. Snyder; Joshua A. Orlicki; Richard S. Reiner; Alan W. Rudie

2012-01-01

Uniform fibers composed of poly(methyl methacrylate) (PMMA) reinforced with progressively increasing contents of cellulose nanocrystals (CNCs), up to 41 wt% CNCs, have been successfully produced by electrospinning. The morphological, thermal and nanomechanical properties of the composite sub-micron fibers were investigated. The CNCs derived from wood pulp by sulfuric...

Electromagnetic Waves in a Uniform Gravitational Field and Planck's Postulate

ERIC Educational Resources Information Center

Acedo, Luis; Tung, Michael M.

2012-01-01

The gravitational redshift forms the central part of the majority of the classical tests for the general theory of relativity. It could be successfully checked even in laboratory experiments on the earth's surface. The standard derivation of this effect is based on the distortion of the local structure of spacetime induced by large masses. The…

Crib Work--An Evaluation of a Problem-Based Learning Experiment: Preliminary Results

ERIC Educational Resources Information Center

Walsh, Vonda K.; Bush, H. Francis

2013-01-01

Problem-based learning has been proven to be successful in both medical colleges and physics classes, but not uniformly across all disciplines. A college course in probability and statistics was used as a setting to test the effectiveness of problem-based learning when applied to homework. This paper compares the performances of the students from…

Role of Uniforms in the Body Image of Female College Volleyball Players

ERIC Educational Resources Information Center

Steinfeldt, Jesse A.; Zakrajsek, Rebecca A.; Bodey, Kimberly J.; Middendorf, Katharine G.; Martin, Scott B.

2013-01-01

Female student athletes often desire a muscular body to be successful in sport, but this body type does not conform to traditional cultural norms of femininity. In this study, the authors qualitatively examined the experiences of female intercollegiate volleyball players to better understand their beliefs about their bodies--both as athletes and…

Potential Therapeutic Use of Relaxin in Healing Cranial Bone Defects

DTIC Science & Technology

2016-08-01

successful production of chimeric mice after irradiation and GFP+ bone marrow transplantation; reproducible implementation of uniform cranial lesions of ~1.5...cranial defect model in chimeric mice transplanted with GFP+ bone marrow. We follow defect closure by three dimensional microcomputed tomography (µCT...histolomorphometry and immunohistochemistry, respectively. 2. Keywords GFP+ chimeric mice, cranial defect closure, relaxin, angiogenesis

Non-uniformly weighted sampling for faster localized two-dimensional correlated spectroscopy of the brain in vivo

NASA Astrophysics Data System (ADS)

Verma, Gaurav; Chawla, Sanjeev; Nagarajan, Rajakumar; Iqbal, Zohaib; Albert Thomas, M.; Poptani, Harish

2017-04-01

Two-dimensional localized correlated spectroscopy (2D L-COSY) offers greater spectral dispersion than conventional one-dimensional (1D) MRS techniques, yet long acquisition times and limited post-processing support have slowed its clinical adoption. Improving acquisition efficiency and developing versatile post-processing techniques can bolster the clinical viability of 2D MRS. The purpose of this study was to implement a non-uniformly weighted sampling (NUWS) scheme for faster acquisition of 2D-MRS. A NUWS 2D L-COSY sequence was developed for 7T whole-body MRI. A phantom containing metabolites commonly observed in the brain at physiological concentrations was scanned ten times with both the NUWS scheme of 12:48 duration and a 17:04 constant eight-average sequence using a 32-channel head coil. 2D L-COSY spectra were also acquired from the occipital lobe of four healthy volunteers using both the proposed NUWS and the conventional uniformly-averaged L-COSY sequence. The NUWS 2D L-COSY sequence facilitated 25% shorter acquisition time while maintaining comparable SNR in humans (+0.3%) and phantom studies (+6.0%) compared to uniform averaging. NUWS schemes successfully demonstrated improved efficiency of L-COSY, by facilitating a reduction in scan time without affecting signal quality.

Creating a Viable Climate for Change When Working With Community Organizations

DOT National Transportation Integrated Search

1995-01-01

Building a successful traffic safety program starts with the recognition that : to be successful, the community-wide effort requires the support of many : individuals and organizations. If everyone is to work collectively toward the : overall plannin...

Induction and differentiation of human induced pluripotent stem cells into functional cardiomyocytes on a compartmented monolayer of gelatin nanofibers

NASA Astrophysics Data System (ADS)

Tang, Yadong; Liu, Li; Li, Junjun; Yu, Leqian; Wang, Li; Shi, Jian; Chen, Yong

2016-07-01

Extensive efforts have been devoted to develop new substrates for culture and differentiation of human induced pluripotent stem cells (hiPSCs) toward cardiac cell-based assays. A more exciting prospect is the construction of cardiac tissue for robust drug screening and cardiac tissue repairing. Here, we developed a patch method by electrospinning and crosslinking of monolayer gelatin nanofibers on a honeycomb frame made of poly(ethylene glycol) diacrylate (PEGDA). The monolayer of the nanofibrous structure can support cells with minimal exogenous contact and a maximal efficiency of cell-medium exchange whereas a single hiPSC colony can be uniformly formed in each of the honeycomb compartments. By modulating the treatment time of the ROCK inhibitor Y-27632, the shape of the hiPSC colony could be controlled from a flat layer to a hemisphere. Afterwards, the induction and differentiation of hiPSCs were achieved on the same patch, leading to a uniform cardiac layer with homogeneous contraction. This cardiac layer could then be used for extracellular recording with a commercial multi-electrode array, showing representative field potential waveforms of matured cardiac tissues with appropriate drug responses.Extensive efforts have been devoted to develop new substrates for culture and differentiation of human induced pluripotent stem cells (hiPSCs) toward cardiac cell-based assays. A more exciting prospect is the construction of cardiac tissue for robust drug screening and cardiac tissue repairing. Here, we developed a patch method by electrospinning and crosslinking of monolayer gelatin nanofibers on a honeycomb frame made of poly(ethylene glycol) diacrylate (PEGDA). The monolayer of the nanofibrous structure can support cells with minimal exogenous contact and a maximal efficiency of cell-medium exchange whereas a single hiPSC colony can be uniformly formed in each of the honeycomb compartments. By modulating the treatment time of the ROCK inhibitor Y-27632, the shape of the hiPSC colony could be controlled from a flat layer to a hemisphere. Afterwards, the induction and differentiation of hiPSCs were achieved on the same patch, leading to a uniform cardiac layer with homogeneous contraction. This cardiac layer could then be used for extracellular recording with a commercial multi-electrode array, showing representative field potential waveforms of matured cardiac tissues with appropriate drug responses. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr04545f

Large-scale synthesis of reduced graphene oxides with uniformly coated polyaniline for supercapacitor applications.

PubMed

Salunkhe, Rahul R; Hsu, Shao-Hui; Wu, Kevin C W; Yamauchi, Yusuke

2014-06-01

We report an effective route for the preparation of layered reduced graphene oxide (rGO) with uniformly coated polyaniline (PANI) layers. These nanocomposites are synthesized by chemical oxidative polymerization of aniline monomer in the presence of layered rGO. SEM, TEM, X-ray photoelectron spectroscopy (XPS), FTIR, and Raman spectroscopy analysis results demonstrated that reduced graphene oxide-polyaniline (rGO-PANI) nanocomposites are successfully synthesized. Because of synergistic effects, rGO-PANI nanocomposites prepared by this approach exhibit excellent capacitive performance with a high specific capacitance of 286 F g(-1) and high cycle reversibility of 94 % after 2000 cycles. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

In-line verification of linewidth uniformity for 0.18 and below: design rule reticles

NASA Astrophysics Data System (ADS)

Tan, TaiSheng; Kuo, Shen C.; Wu, Clare; Falah, Reuven; Hemar, Shirley; Sade, Amikam; Gottlib, Gidon

2000-07-01

Mask making process development and control is addressed using a reticle inspection tool equipped with the new revolutionized application called LBM-Linewidth Bias Monitoring. In order to use the LBM for mask-making process control, procedures and corresponding test plates are a developed, such that routine monitoring of the manufacturing process discloses process variation and machine variation. At the same time systematic variation are studied and either taken care of or taken into consideration to allow successful production line work. In this paper the contribution of the LBM for mask quality monitoring is studied with respect to dense layers, e.g. DRAM. Another aspect of this application - the detection of very small CD mis-uniformity areas is discussed.

Fabricating fiber Bragg gratings with two phase masks based on reconstruction-equivalent-chirp technique.

PubMed

Gao, Liang; Chen, Xiangfei; Xiong, Jintian; Liu, Shengchun; Pu, Tao

2012-01-30

Based on reconstruction-equivalent-chirp (REC) technique, a novel solution for fabricating low-cost long fiber Bragg gratings (FBGs) with desired properties is proposed and initially studied. A proof-of-concept experiment is demonstrated with two conventional uniform phase masks and a submicron-precision translation stage, successfully. It is shown that the original phase shift (OPS) caused by phase mismatch of the two phase masks can be compensated by the equivalent phase shift (EPS) at the ±1st channels of sampled FBGs, separately. Furthermore, as an example, a π phase-shifted FBG of about 90 mm is fabricated by using these two 50mm-long uniform phase masks based on the presented method.

Shape and fission instabilities of ferrofluids in non-uniform magnetic fields

NASA Astrophysics Data System (ADS)

Vieu, Thibault; Walter, Clément

2018-04-01

We study static distributions of ferrofluid submitted to non-uniform magnetic fields. We show how the normal-field instability is modified in the presence of a weak magnetic field gradient. Then we consider a ferrofluid droplet and show how the gradient affects its shape. A rich phase transitions phenomenology is found. We also investigate the creation of droplets by successive splits when a magnet is vertically approached from below and derive theoretical expressions which are solved numerically to obtain the number of droplets and their aspect ratio as function of the field configuration. A quantitative comparison is performed with previous experimental results, as well as with our own experiments, and yields good agreement with the theoretical modeling.

Out-coupling membrane for large-size organic light-emitting panels with high efficiency and improved uniformity

NASA Astrophysics Data System (ADS)

Ding, Lei; Wang, Lu-Wei; Zhou, Lei; Zhang, Fang-hui

2016-12-01

An out-coupling membrane embedded with a scattering film of SiO2 spheres and polyethylene terephthalate (PET) plastic was successfully developed for 150 × 150 mm2 green OLEDs. Comparing with a reference OLED panel, an approximately 1-fold enhancement in the forward emission was obtained with an out-coupling membrane adhered to the surface of the external glass substrate of the panel. Moreover, it was verified that the emission color at different viewing angles can be stabilized without apparent spectral distortion. Particularly, the uniformity of the large-area OLEDs was greatly improved. Theoretical calculation clarified that the improved performance of the lighting panels is primarily attributed to the effect of particle scattering.

SPATIAL VARIABILITY IN POLLUTANTS: IMPLICATIONS FOR EXPOSURE ASSESSMENT

EPA Science Inventory

The efforts to evaluate the value of improved exposure metrics on the ability to relate those metrics with outcomes in complex systems have met with varying degrees of success. This work describes the results of recent efforts, mostly involving air pollutants, to improve the sop...

An overview of NASA's activities in micro-nano technologies

NASA Technical Reports Server (NTRS)

Stocky, J. F.

2000-01-01

An examination of how mass is used in spacecraft design indicates that technology efforts directed only to reduce the mass of electronics, both digital and analog will not significantly reduce the mass of a spacecraft, regardless of how much success those efforts achieve.

Systematic Dissemination of Research and Development Program Improvement Efforts.

ERIC Educational Resources Information Center

Sanders, Carol S.

A systematic approach to disseminaton of vocational education research and development program improvement efforts is comprehensive, effective, and efficient. Systematic dissemination is a prerequisite link to assessing impact of research and development--for program improvement to occur, successful dissemination is crucial. A systematic approach…

Quality Assurance through ISO 9000.

ERIC Educational Resources Information Center

Zuckerman, Amy

2000-01-01

Created in 1987 by the International Organization for Standardization, in Geneva, Switzerland, ISO 9000 is attempting to develop a world standard to help companies and other institutions measure and monitor their quality-control efforts. This article describes four school districts' successful efforts to secure ISO 9000 certification. (MLH)

Hazardous material transportation safety and security field operational test beta test and baseline data report : executive summary

DOT National Transportation Integrated Search

2003-10-29

The Beta Test and Baseline Data Collection efforts ensured that the test technologies would successfully operate during the field operational test (FOT) in the designed scenario configurations. These efforts also ensured that FOT systems would succes...

A mire of highly subjective and ineffective voluntary guidelines: tobacco industry efforts to thwart tobacco control in Malaysia

PubMed Central

Assunta, M; Chapman, S

2004-01-01

Objective: To describe tobacco industry efforts in Malaysia to thwart government efforts to regulate tobacco promotion and health warnings. Methods: Systematic keyword and opportunistic website searches of formerly private tobacco industry internal documents made available through the Master Settlement Agreement and secondary websites; relevant information from news articles and financial reports. Results: Commencing in the 1970s, the industry began to systematically thwart government tobacco control. Guidelines were successfully promoted in the place of legislation for over two decades. Even when the government succeeded in implementing regulations such as health warnings and advertising bans they were compromised and acted effectively to retard further progress for years to come. Conclusion: Counter-measures to delay or thwart government efforts to regulate tobacco were initiated by the industry. Though not unique to Malaysia, the main difference lies in the degree to which strategies were used to successfully counter stringent tobacco control measures between 1970 and 1995. PMID:15564220

Achieving College Success: The Impact of the College Success/STEM Program on Students' Matriculation to and Persistence in College. Research Brief

ERIC Educational Resources Information Center

Lane, Brett; Souvanna, Phomdaen

2014-01-01

This College Success Research Brief is one of a series of briefs documenting the implementation and impact of Mass Insight's College Success/STEM program. The research briefs are intended to share key findings, highlight ongoing questions and lines of inquiry, and inform the thinking of practitioners and policymakers on how to scale up efforts to…

Identifying Successful Advancement Approaches in Four Catholic Universities: The Effectiveness of the Four Advancement Models of Communication

ERIC Educational Resources Information Center

Bonglia, Jean-Pierre K.

2010-01-01

The current longitudinal study of the most successful Catholic universities in the United States identifies the prevalence of four advancement models of communication that have contributed to make those institutions successful in their philanthropic efforts. While research by Grunig and Kelly maintained that the two-way symmetrical model of…

[Psychological research on the cognitive aspect of emotional processes in schizophrenia patients].

PubMed

Kurek, N S

1988-01-01

Cognitive aspects of emotionality were psychologically investigated in 250 patients with continuous and paroxysmal progredient schizophrenia and differently pronounced defect. The control group consisted of 100 normal subjects. A set of 7 techniques was applied. In cases of the patient's defect accentuated, cognitive emotional disorder was marked with the emotions and emotiogenic situations underestimation in dealing with other people and cognitive activities. This underestimation was not a uniform one concerning to a larger extent the strong emotions in other subjects, patients' own positive emotions, success in individual problem solving and degree of success in cooperative performance. Weak emotions, negative ones and failure situations were underestimated to a lesser degree, as was the success rating in competitive paradigms.

Population status and habitat associations of the King Rail in the midwestern United States

USGS Publications Warehouse

Bolenbaugh, Jason R.; Cooper, Tom; Brady, Ryan S.; Willard, Karen L.; Krementz, David G.

2012-01-01

The migratory population of the King Rail (Rallus elegans) has declined dramatically during the past 50 years, emphasizing the need to document the distribution and status of this species to help guide conservation efforts. In an effort to guide King Rail breeding habitat protection and restoration, a landscape suitability index (LSI) model was developed for the Upper Mississippi River and Great Lakes Region Joint Venture (JV). To validate this model, 264 sites were surveyed across the JV region in 2008 and 2009 using the National Marshbird Monitoring protocol. Two other similarly collected data sets from Wisconsin (250 sites) and Ohio (259 sites) as well as data from the Cornell Laboratory of Ornithology's eBird database were added to our data set. Sampling effort was not uniform across the study area. King Rails were detected at 29 sites with the greatest concentration in southeastern Wisconsin and northeastern Illinois. Too few detections were made to validate the LSI model. King Rail detection sites tended to have microtopographic heterogeneity, more emergent herbaceous wetland vegetation and less woody vegetation. The migrant population of the King Rail is rare and warrants additional conservation efforts to achieve stated conservation population targets.

Psychological and neural mechanisms associated with effort-related cardiovascular reactivity and cognitive control: An integrative approach.

PubMed

Silvestrini, Nicolas

2017-09-01

Numerous studies have assessed cardiovascular (CV) reactivity as a measure of effort mobilization during cognitive tasks. However, psychological and neural processes underlying effort-related CV reactivity are still relatively unclear. Previous research reliably found that CV reactivity during cognitive tasks is mainly determined by one region of the brain, the dorsal anterior cingulate cortex (dACC), and that this region is systematically engaged during cognitively demanding tasks. The present integrative approach builds on the research on cognitive control and its brain correlates that shows that dACC function can be related to conflict monitoring and integration of information related to task difficulty and success importance-two key variables in determining effort mobilization. In contrast, evidence also indicates that executive cognitive functioning is processed in more lateral regions of the prefrontal cortex. The resulting model suggests that, when automatic cognitive processes are insufficient to sustain behavior, the dACC determines the amount of required and justified effort according to task difficulty and success importance, which leads to proportional adjustments in CV reactivity and executive cognitive functioning. These propositions are discussed in relation to previous findings on effort-related CV reactivity and cognitive performance, new predictions for future studies, and relevance for other self-regulatory processes. Copyright © 2016 Elsevier B.V. All rights reserved.

Disinformation squared: was the HIV-from-Fort-Detrick myth a Stasi success?

PubMed

Geissler, Erhard; Sprinkle, Robert Hunt

2013-01-01

When in May 1983 the acquired immunodeficiency syndrome (AIDS) was first securely attributed to a virus, eventually called the human immunodeficiency virus (HIV), many controversies arose. Among these was one centering on HIV's origin. A startling hypothesis, called here the "HIV-from-Fort-Detrick myth," asserted that HIV had been a product, accidental or intentional, of bioweaponry research. While its earliest identifiable contributors were in the West, this myth's most dynamic propagators were in the East. The Soviet security service, the KGB, took "active measures" to create and disseminate AIDS disinformation beginning no later than July 1983 and ending no earlier than October 1987. The East German security service, a complex bureaucracy popularly known as "the Stasi," was involved, too, but how early, how deeply, how uniformly, how ably, and how successfully has not been clear. Following German reunification, claims arose attributing to the Stasi the masterful execution of ingenious elements in a disinformation campaign they helped shape and soon came to dominate. We have tested these claims. Was the HIV-from-Fort-Detrick myth a Stasi success? Primary sources were documents and photographs assembled by the Ministry of State Security (MfS) of the German Democratic Republic (GDR or East Germany), the Ministry of Interior of the People's Republic of Bulgaria, and the United States Department of State; the estate of myth principals Jakob and Lilli Segal; the "AIDS box" in the estate of East German literary figure Stefan Heym; participant-observer recollections, interviews, and correspondence; and expert interviews. We examined secondary sources in light of primary sources. The HIV-from-Fort-Detrick myth had debuted in print in India in 1983 and had been described in publications worldwide prior to 1986, the earliest year for which we found any Stasi document mentioning the myth in any context. Many of the myth's exponents were seemingly independent conspiracy theorists. Its single most creative exponent was Jakob Segal, an idiosyncratic Soviet biologist long resident in, and long retired in, the GDR. Segal applied to the myth a thin but tenacious layer of plausibility. We could not exclude a direct KGB influence on him but found no evidence demonstrating it. The Stasi did not direct his efforts and had difficulty tracking his activities. The Stasi were prone to interpretive error and self-aggrandizement. They credited themselves with successes they did not achieve, and, in one instance, failed to appreciate that a major presumptive success had actually been a fiasco. Senior Stasi officers came to see the myth's propagation as an embarrassment threatening broader interests, especially the GDR's interest in being accepted as a scientifically sophisticated state. In 1986, 1988, and 1989, officers of HV A/X, the Stasi's disinformation and "active measures" department, discussed the myth in meetings with the Bulgarian secret service. In the last of these meetings, HV A/X officers tried to interest their Bulgarian counterparts in taking up, or taking over, the myth's propagation. Further efforts, if any, were obscured by collapse of the East German and Bulgarian governments. No, the HIV-from-Fort-Detrick myth was not a Stasi success. Impressions to the contrary can be attributed to reliance on presumptions, boasts, and inventions. Presumptions conceding to the Stasi an extraordinary operational efficiency and an irresistible competence - qualities we could not confirm in this case - made the boasts and inventions more convincing than their evidentiary basis, had it been known, would have allowed. The result was disinformation about disinformation, a product we call "disinformation squared."

Army Acquisition and Contracting Personnel Requirements: How are the Army’s Current Recruitment, Development and Retention Programs Meeting Current and Future Personnel Requirements?

DTIC Science & Technology

2011-09-01

Contracting Center SEEP Student Educational Employment Program SAP Simplified Acquisition Procedures SDDC Surface Deployment and Distribution...personnel is more decentralized in DoD than it is for the uniformed military, and civilian employment levels are more driven by operating budgets...private sector recruiting efforts and make it easier to apply for DoD acquisition positions 26 5. Maximize use of the Student Educational Employment

Defining the Role and Functions of the Utilization Management Nurse Consultant at Keller Army Community Hospital

DTIC Science & Technology

1993-08-01

Military Health Services System (MHSS), continue to rise at an unacceptable rate. In an effort to curb rising costs, the Department of Defense has...Currently we spend $23,000 a second, more than $2 billion a day, and $733 billion a year on medical care (Castro, 1991). The cost of medical care in the...mandated that DoD pursue cost containment initiatives. Demonstration projects such as the Civilian Health and Medical Program of the Uniformed Services

Carbon-Phenolic Cages for High-Speed Bearings. Part II - Bearing Evaluation with a Multiply-Alkylated Cyclopentane (MAC) Lubricant

DTIC Science & Technology

2003-01-01

program manager for the overall effort. The carbon -phenolic cages were fabricated under the direction of Mr. Wei Shih of Allcomp Inc ., City of...friction. The early carbon -phenolic cages were hand wrapped by Allcomp . Since that time, Allcomp has added a wrapping machine that uses uniform tension...AFRL-PR-WP-TR-2003-2032 CARBON -PHENOLIC CAGES FOR HIGH-SPEED BEARINGS Part II - Bearing Evaluation with a Multiply- Alkylated Cyclopentane (MAC

Improved Thermal-Vacuum Compatible Flat Plate Radiometric Souce for System-Level Testing of Optical Sensors

NASA Technical Reports Server (NTRS)

Schwarz, Mark A.; Kent, Craig J.; Bousquet, Robert; Brown, Steven W.

2015-01-01

This work describes the development of an improved vacuum compatible flat plate radiometric source used for characterizing and calibrating remote optical sensors, in situ, throughout their testing period. The original flat plate radiometric source was developed for use by the VIIRS instrument during the NPOESS Preparatory Project (NPP). Following this effort, the FPI has had significant upgrades in order to improve both the radiometric throughput and uniformity. Results of the VIIRS testing with the reconfigured FPI are reported and discussed.

Analytical prediction of digital signal crosstalk of FCC

NASA Technical Reports Server (NTRS)

Belleisle, A. P.

1972-01-01

The results are presented of study effort whose aim was the development of accurate means of analyzing and predicting signal cross-talk in multi-wire digital data cables. A complete analytical model is developed n + 1 wire systems of uniform transmission lines with arbitrary linear boundary conditions. In addition, a minimum set of parameter measurements required for the application of the model are presented. Comparisons between cross-talk predicted by this model and actual measured cross-talk are shown for a six conductor ribbon cable.

Status of the R&D activity on diamond particle detectors

NASA Astrophysics Data System (ADS)

Adam, W.; Bellini, B.; Berdermann, E.; Bergonzo, P.; de Boer, W.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; D'Angelo, P.; Dabrowski, W.; Delpierre, P.; Doroshenko, J.; Dulinski, W.; van Eijk, B.; Fallou, A.; Fischer, P.; Fizzotti, F.; Furetta, C.; Gan, K. K.; Ghodbane, N.; Grigoriev, E.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kaplon, J.; Karl, C.; Kass, R.; Keil, M.; Knöpfle, K. T.; Koeth, T.; Krammer, M.; Logiudice, A.; Lu, R.; mac Lynne, L.; Manfredotti, C.; Marshall, R. D.; Meier, D.; Menichelli, D.; Meuser, S.; Mishina, M.; Moroni, L.; Noomen, J.; Oh, A.; Perera, L.; Pernicka, M.; Polesello, P.; Potenza, R.; Riester, J. L.; Roe, S.; Rudge, A.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Sutera, C.; Trischuk, W.; Tromson, D.; Tuve, C.; Weilhammer, P.; Wermes, N.; Wetstein, M.; Zeuner, W.; Zoeller, M.; RD42 Collaboration

2003-09-01

Chemical Vapor Deposited (CVD) polycrystalline diamond has been proposed as a radiation-hard alternative to silicon in the extreme radiation levels occurring close to the interaction region of the Large Hadron Collider. Due to an intense research effort, reliable high-quality polycrystalline CVD diamond detectors, with up to 270 μm charge collection distance and good spatial uniformity, are now available. The most recent progress on the diamond quality, on the development of diamond trackers and on radiation hardness studies are presented and discussed.

Assessment of U.S. and Coalition Efforts to Develop the Logistics and Maintenance Sustainment Capability of the Afghan National Police

DTIC Science & Technology

2015-01-30

Border Police ( ABP ) facilities officer reported he had not received the budget allocation he required to maintain over 135 buildings and checkpoints in...visited the Kandahar and Herat RLCs. The team also spoke with key ANP logistics personnel in the MoI, Afghan Border Police ( ABP ), Afghan Uniformed...AUP, ABP , and ANCOP units regularly bypassed the RLC and conducted logistics / supply business directly with the NLC. This occurred for various

Self-Regulation and School Readiness

ERIC Educational Resources Information Center

Eisenberg, Nancy; Valiente, Carlos; Eggum, Natalie D.

2010-01-01

Research Findings: In this article, we review research on the relations of self-regulation and its dispositional substrate, effortful control, to variables involved in school success. First, we present a conceptual model in which the relation between self-regulation/effortful control and academic performance is mediated by low maladjustment and…

Often Difficult--But Worth It. Collaboration among Professionals.

ERIC Educational Resources Information Center

Walker, Joyce A.

1988-01-01

A joint effort between the Minnesota Extension Service and University of Minnesota School of Medicine produced a community-based research and educational program on stress, depression, and suicide prevention. The Teens in Distress program represents a successful collaborative effort and illustrates the potential problems when Extension…

Who pays for tree improvement?

Treesearch

Tom D. Byram; E. M. Raley

2011-01-01

Tree improvement has been one of the most successful collaborative research efforts in history, eliciting participation from a wide variety of players. This effort has included state forestry agencies, research universities, integrated forest industries, and the USDA Forest Service. Tree improvement was organized through cooperatives whose objectives were to distribute...

Shock without Awe

ERIC Educational Resources Information Center

Krueger, Joachim I.

2011-01-01

In January 2011, the "American Psychologist" ran a special issue on "Comprehensive Soldier Fitness," edited by Martin Seligman and Michael Matthews. Thirteen articles described a collaborative effort by the U.S. Army and positive psychologists to "improve our force's resilience" (Casey, 2011, p. 1). If successful, one assumes, these efforts will…

Electrofluidics in Micro/Nanofluidic Systems

NASA Astrophysics Data System (ADS)

Guan, Weihua

This work presents the efforts to study the electrofluidics, with a focus on the electric field - matter interactions in microfluidic and nanofluidic systems for lab-on-a-chip applications. The field of electrofluidics integrates the multidisciplinary knowledge in silicon technology, solid and soft condensed matter physics, fluidics, electrochemistry, and electronics. The fundamental understanding of electrofluidics in engineered micro and nano structures opens up wide opportunities for biomedical sensing and actuation devices integrated on a single chip. Using spatial and temporal properties of electric fields in top-down engineered micro/nana structures, we successfully demonstrated the precise control over a single macro-ion and a collective group of ions in aqueous solutions. In the manipulation of a single macro-ion, we revisited the long-time overlooked AC electrophoretic (ACEP) phenomena. We proved that the widely held notion of vanishing electrophoretic (EP) effects in AC fields does not apply to spatially non-uniform electric fields. In contrast to dielectrophoretic (DEP) traps, ACEP traps favor the downscaling of the particle size if it is sufficiently charged. We experimentally demonstrated the predicted ACEP trap by recognizing that the ACEP dynamics is equivalent to that of Paul traps working in an aqueous solution. Since all Paul traps realized so far have only been operated in vacuum or gaseous phase, our experimental effort represents the world's first aqueous Paul trap device. In the manipulation of a collective group of ions, we demonstrated that the ion transport in nanochannels can be directly gated by DC electric fields, an impossible property in microscale geometries. Successful fabrication techniques were developed to create the nanochannel structures with gating ability. Using the gated nanochannel structures, we demonstrated a field effect reconfigurable nanofluidic diode, whose forward/reverse direction as well as the rectification degree can be significantly modulated. We also demonstrated a solid-state protocell, whose ion selectivity and membrane potential can be modulated by external electric field. Moreover, by recognizing the key role played by the surface charge density in electrofluidic gating of nanochannels, a low-cost, off-chip extended gate field effect transistor (FET) structure to measure the surface charges at the dielectric-electrolyte interface is demonstrated. This technique simplifies and accelerates the process of dielectric selection for effective electrofluidic gating.

Orbital express capture system: concept to reality

NASA Astrophysics Data System (ADS)

Stamm, Shane; Motaghedi, Pejmun

2004-08-01

The development of autonomous servicing of on-orbit spacecraft has been a sought after objective for many years. A critical component of on-orbit servicing involves the ability to successfully capture, institute mate, and perform electrical and fluid transfers autonomously. As part of a Small Business Innovation Research (SBIR) grant, Starsys Research Corporation (SRC) began developing such a system. Phase I of the grant started in 1999, with initial work focusing on simultaneously defining the parameters associated with successful docking while designing to those parameters. Despite the challenge of working without specific requirements, SRC completed development of a prototype design in 2000. Throughout the following year, testing was conducted on the prototype to characterize its performance. Having successfully completed work on the prototype, SRC began a Phase II SBIR effort in mid-2001. The focus of the second phase was a commercialization effort designed to augment the prototype model into a more flight-like design. The technical requirements, however, still needed clear definition for the design to progress. The advent of the Orbital Express (OE) program provided much of that definition. While still in the proposal stages of the OE program, SRC began tailoring prototype redesign efforts to the OE program requirements. A primary challenge involved striking a balance between addressing the technical requirements of OE while designing within the scope of the SBIR. Upon award of the OE contract, the Phase II SBIR design has been fully developed. This new design, designated the Mechanical Docking System (MDS), successfully incorporated many of the requirements of the OE program. SRC is now completing dynamic testing on the MDS hardware, with a parallel effort of developing a flight design for OE. As testing on the MDS progresses, the design path that was once common to both SBIR effort and the OE program begins to diverge. The MDS will complete the scope of the Phase II SBIR work, while the new mechanism, the Orbital Express Capture System, will emerge as a flight-qualified design for the Orbital Express program.

Commentary: evidence to guide gun violence prevention in America.

PubMed

Webster, Daniel W

2015-03-18

Gun violence is a major threat to the public's health and safety in the United States. The articles in this volume's symposium on gun violence reveal the scope of the problem and new trends in mortality rates from gunfire. Leading scholars synthesize research evidence that demonstrates the ability of numerous policies and programs-each consistent with lessons learned from successful efforts to combat public health problems-to prevent gun violence. Each approach presents challenges to successful implementation. Future research should inform efforts to assess which approaches are most effective and how to implement evidence-based interventions most effectively.

Urban tree-planting programs — A model for encouraging environmentally protective behavior

NASA Astrophysics Data System (ADS)

Summit, Joshua; Sommer, Robert

Efforts to increase environmentally sound behaviors and practices have in the past often focussed on consciousness-raising and attitude change. Research indicates that such efforts are less effective than interventions designed to make environmentally sound behaviors easier to engage in, or to make personal advantages resulting from such behaviors more clear to individuals. Four nonprofit tree planting organizations were studied as examples of successful environmental interventions. From these studies, as well as a review of the literature, several principles underlying successful behavioral interventions are identified. Implications of these principles for future environmental programs are discussed.

Materials for geothermal production

NASA Astrophysics Data System (ADS)

Kukacka, L. E.

Advances in the development of new materials continue to be made in the geothermal materials project. Many successes have already been accrued and the results used commercially. In FY-91, work was focused on reducing well drilling, fluid transport and energy conversion costs. Specific activities performed included lightweight CO2 resistant well cements, thermally conductive and scale resistant protective liner systems, chemical systems for lost circulation control, corrosion mitigation in process components at The Geysers, and elastomer-metal bonding systems. Efforts to transfer the technologies developed in these efforts to other energy-related sectors of the economy continued, and considerable success was achieved.

Uniform Corrosion and General Dissolution of Aluminum Alloys 2024-T3, 6061-T6, and 7075-T6

NASA Astrophysics Data System (ADS)

Huang, I.-Wen

Uniform corrosion and general dissolution of aluminum alloys was not as well-studied in the past, although it was known for causing significant amount of weight loss. This work comprises four chapters to understand uniform corrosion of aluminum alloys 2024-T3, 6061-T6, and 7075-T6. A preliminary weight loss experiment was performed for distinguishing corrosion induced weight loss attributed to uniform corrosion and pitting corrosion. The result suggested that uniform corrosion generated a greater mass loss than pitting corrosion. First, to understand uniform corrosion mechanism and kinetics in different environments, a series of static immersion tests in NaCl solutions were performed to provide quantitative measurement of uniform corrosion. Thereafter, uniform corrosion development as a function of temperature, pH, Cl-, and time was investigated to understand the influence of environmental factors. Faster uniform corrosion rate has been found at lower temperature (20 and 40°C) than at higher temperature (60 and 80°C) due to accelerated corrosion product formation at high temperatures inhibiting corrosion reactions. Electrochemical tests including along with scanning electron microscopy (SEM) were utilized to study the temperature effect. Second, in order to further understand the uniform corrosion influence on pit growth kinetics, a long term exposures for 180 days in both immersion and ASTM-B117 test were performed. Uniform corrosion induced surface recession was found to have limited impact on pit geometry regardless of exposure methods. It was also found that the competition for limited cathodic current from uniform corrosion the primary rate limiting factor for pit growth. Very large pits were found after uniform corrosion growth reached a plateau due to corrosion product coverage. Also, optical microscopy and focused ion beam (FIB) imaging has provided more insights of distinctive pitting geometry and subsurface damages found from immersion samples and B117 samples. Although uniform corrosion was studied in various electrolytes, the pH impact was still difficult to discern due to ongoing cathodic reactions that changed electrolyte pH with time. Therefore, buffered pH electrolytes with pH values of 3, 5, 8, and 10 were prepared static immersion tests. Electrochemical experiments were performed in each buffered pH conditions for understanding corrosion mechanisms. Uniform corrosion was found exhibiting higher corrosion rate in buffered acidic and alkaline electrolytes due to pH- and temperature-dependent corrosion product precipitation. Observations were supported by electrochemical, SEM, and EDS observations. Due to the complexity of corrosion data, a reliable corrosion prediction based on empirical observations could be challenging. Artificial neural network (ANN) modeling was used for corrosion data pattern recognition by mimicking human neural network systems. Predictive models were developed based on corrosion data acquired in this study. The model was adaptable through iteratively update its prediction by error minimization during the training phase. Trained ANN model can predict uniform corrosion successfully. In addition to ANN, fuzzy curve analysis was utilized to rank the influence of each input (temperature, pH, Cl-, and time). For example, temperature and pH were found to be the most influential parameters to uniform corrosion. This information can provide feedback for ANN improvement, also known as "data pruning".

Crick's gossip test and Watson's boredom principle: A pseudo-mathematical analysis of effort in scientific research.

PubMed

Charlton, Bruce G

2008-01-01

Crick and Watson gave complementary advice to the aspiring scientist based on the insight that to do your best work you need to make your greatest possible effort. Crick made the positive suggestion to work on the subject which most deeply interests you, the thing about which you spontaneously gossip - Crick termed this 'the gossip test'. Watson made the negative suggestion of avoiding topics and activities that bore you - which I have termed 'the boredom principle'. This is good advice because science is tough and the easy things have already been done. Solving the harder problems that remain requires a lot of effort. But in modern biomedical science individual effort does not necessarily correlate with career success as measured by salary, status, job security, etc. This is because Crick and Watson are talking about revolutionary science - using Thomas Kuhn's distinction between paradigm-shifting 'revolutionary' science and incremental 'normal' science. There are two main problems with pursuing a career in revolutionary science. The first is that revolutionary science is intrinsically riskier than normal science, the second that even revolutionary success in a scientific backwater may be less career-enhancing than mundane work in a trendy field. So, if you pick your scientific problem using the gossip test and the boredom principle, you might also be committing career suicide. This may explain why so few people follow Crick and Watson's advice. The best hope for future biomedical science is that it will evolve towards a greater convergence between individual effort and career success.

Socio-cultural Differences and Developmental Changes in Continuing Motivation, Evaluation Anxiety, and Attributions of Success and Failure.

ERIC Educational Resources Information Center

Fyans, Leslie J., Jr.

Students' reported reasons for academic success or failure (categorized as ability, effort, task difficulty, or luck) were studied simultaneously in over 1,000 students in grades 4, 8, and 11. Differences between 16 attributional groups (4 success x 4 failure) were reported by discriminant analysis, according to grade, sex, and ethnic…

Next Steps in Attachment Theory.

PubMed

Bell, David C

2012-12-01

Thanks to the phenomenal success of attachment theory, great progress has been made in understanding child and adult relationships. The success of attachment theory opens the way to new research directions that can extend its successes even further. In particular, more work on the fundamental nature of attachment that respects recent biological research is important, as is concentrated effort on the related caregiving system.

Predictors of Academic Success between On Track and Off Track Students in a Mexican University

ERIC Educational Resources Information Center

Hinojos, Jesus Francisco

2013-01-01

The main purpose of this study was to assess how predictors of quality of academic effort relate to academic success and student persistence of on-track and off-track students in a higher education institution in Northern Mexico; to investigate the relationship of pre-entry attributes, family background and academic success as expressed by GPA…

Attributions for Success: Exploring the Potential Impact on Music Learning in High School

ERIC Educational Resources Information Center

Rosevear, Jennifer C.

2010-01-01

Students' beliefs about why they may or may not be successful in various pursuits can influence the extent to which they are likely to invest effort in these pursuits and which in turn affects the level of achievement likely to be experienced. Attributional beliefs assign causes for success and failure to a range of factors, including ability,…

Next Steps in Attachment Theory

PubMed Central

Bell, David C.

2012-01-01

Thanks to the phenomenal success of attachment theory, great progress has been made in understanding child and adult relationships. The success of attachment theory opens the way to new research directions that can extend its successes even further. In particular, more work on the fundamental nature of attachment that respects recent biological research is important, as is concentrated effort on the related caregiving system. PMID:23504112

Delivering Educational Services that Meet the Needs of All Students

ERIC Educational Resources Information Center

Ferretti, Ralph P.; Eisenman, Laura T.

2010-01-01

Federal policies intended to promote educational equity, especially through state accountability mechanisms, have mobilized efforts to improve outcomes for students with disabilities. Although these efforts have met with some success, achievement gaps remain. The authors argue that local cultures of teaching practices and decision making continue…

Regional efforts to promote forestry best management practices: a southern success story

Treesearch

Herb Nicholson; John Colberg; Hughes Simpson; Tom Gerow; Wib Owen

2016-01-01

The Southern Group of State Foresters has a long history of water resource protection efforts, providing leadership in BMP development, improvement, and implementation, enhancing state BMP programs, establishing effective partnerships, and standardizing an approach to consistently monitor implementation across the region.

Schools Where Parents Make A Difference.

ERIC Educational Resources Information Center

Davies, Don, Ed.

This book presents 11 case studies that demonstrate successful efforts to improve education through building new relationships between schools and communities. In addition to presenting the case studies, the book also contains an introductory chapter that discusses the potentials and pitfalls of local efforts at participatory democracy, as well as…

Instruction Emphasizing Effort Improves Physics Problem Solving

ERIC Educational Resources Information Center

Li, Daoquan

2012-01-01

Effectively using strategies to solve complex problems is an important educational goal and is implicated in successful academic performance. However, people often do not spontaneously use the effective strategies unless they are motivated to do so. The present study was designed to test whether educating students about the importance of effort in…

Effective Promotion in a Greater Metropolitan Area.

ERIC Educational Resources Information Center

Kelly, J. Terence

Community colleges offering or contemplating offering television-based courses will be successful in promotional efforts if the fundamental, philosophical purpose is built upon a need for expanding current educational services to a population thus far unaffected by on-campus programs. Efforts in promoting television courses should be made so that…

Advancing Equity in Illinois's ESSA Plan

ERIC Educational Resources Information Center

Ostro, Ginger

2017-01-01

Advance Illinois is an independent, objective voice for a healthy public education system that prepares all students in Illinois for success in college, careers, and civic life. Advocacy efforts have focused on securing equitable funding for schools, Common Core State Standards, high-quality assessments, and teacher quality efforts. As advocates…

Regional Collaboration To Combat Substance Abuse: A Local Success Story.

ERIC Educational Resources Information Center

Upperman, James E.

This paper provides information on a substance abuse prevention effort called the Commonwealth Alliance for Drug Rehabilitation and Education (CADRE). After a discussion of the origins of CADRE, five steps taken by CADRE in its substance abuse prevention efforts are described, beginning with organizational establishment. The identification and…

Moving toward a Culture of Inquiry

ERIC Educational Resources Information Center

Martin, Ralph

2010-01-01

In this paper, the author aims to share some of the efforts, successes, challenges and lessons learned over approximately two decades of professional development projects both large and small. In retrospect the author contends that efforts toward change, improvement and advancement were always bumping against culture. So, this address attempts to…

Evaluating a School-Based Trachoma Curriculum in Tanzania

ERIC Educational Resources Information Center

Lewallen, Susan; Massae, Patrick; Tharaney, Manisha; Somba, Margareth; Geneau, Robert; MacArthur, Chad; Courtright, Paul

2008-01-01

Trachoma remains a public health problem in a number of sub-Saharan Africa countries; behavioral change and environmental improvements are cornerstones of prevention efforts. Evidence of successful health education are few in Africa. Health education efforts through primary schools have recently been developed and adopted in Tanzania. We evaluated…

Systematic Processing of Clementine Data for Scientific Analyses

NASA Technical Reports Server (NTRS)

Mcewen, A. S.

1993-01-01

If fully successful, the Clementine mission will return about 3,000,000 lunar images and more than 5000 images of Geographos. Effective scientific analyses of such large datasets require systematic processing efforts. Concepts for two such efforts are described: glogal multispectral imaging of the moon; and videos of Geographos.

Exploring Students' Reflective Thinking Practice, Deep Processing Strategies, Effort, and Achievement Goal Orientations

ERIC Educational Resources Information Center

Phan, Huy Phuong

2009-01-01

Recent research indicates that study processing strategies, effort, reflective thinking practice, and achievement goals are important factors contributing to the prediction of students' academic success. Very few studies have combined these theoretical orientations within one conceptual model. This study tested a conceptual model that included, in…

Moisture, plant-plant interactions and herbivory as drivers of rangeland restoration success in the western US

USDA-ARS?s Scientific Manuscript database

Restoration efforts in the western US occur across a diverse array of plant communities and climatic conditions. Restoration is likely constrained by different factors in different locations, but few efforts have compared the outcomes of rangeland restoration experiments across broad spatial scales....

Understanding Policy Implementation: District-Level Leaders' Perceptions of Reading Policy Implementation Efforts

ERIC Educational Resources Information Center

Hall, Charles Dana

2013-01-01

Research investigating the complex, multi-directional relationships inherent to public education has become a focal point of reform research. This study investigated the perceptions held by district-level leaders regarding the Colorado Department of Education's efforts to facilitate the successful implementation of reading policy. In addition, it…

Preventive strategy for BVDV infection in North America

USDA-ARS?s Scientific Manuscript database

Despite control efforts, bovine viral diarrhea virus (BVDV) infections remain a source of significant economic loss for producers in the United States. The success of control efforts in Scandinavia has demonstrated that BVDV eradication is possible. However, it is not possible to take a “one size fi...

Including All Staff in an Alternative School's Effort to Reduce Violence

ERIC Educational Resources Information Center

Waterman, Stephanie J.; Burstyn, Joan N.

2008-01-01

Interview data from non-teaching staff at Garfield alternative school revealed how the entire staff-including custodians, secretaries, and hall monitors-contributed to the success of the school's violence prevention efforts. The school functioned democratically: non-teaching staff attended violence prevention workshops offered to all staff; the…

MICHAEL "RUDI" RUDOLPHI SPEAKING AT MISSION SUCCESS FORUM

NASA Image and Video Library

2016-06-16

MICHAEL "RUDI" RUDOLPHI GESTURES DURING A "MISSION SUCCESS IS IN OUR HANDS" SHARED EXPERIENCES FORUM JUNE 16, WHERE HE SPOKE ABOUT HIS "UNFORGETTABLE" EXPERIENCES AS A SENIOR NASA REPRESENTATIVE OVERSEEING DEBRIS RECOVERY EFFORTS FOLLOWING THE LOSS OF SPACE SHUTTLE COLUMBIA AND ITS CREW.

90 Years of Rural Development Programs.

ERIC Educational Resources Information Center

Rasmussen, Wayne D.

1985-01-01

Discusses history of United States government programs to ameliorate rural living and economic conditions. Contrasts early successful efforts to improve physical characteristics--road, electricity--with recent lack of success in dealing with intractable problems--unemployment, persistent poverty. Chart of rural development actions outlines rural…

Moving lips versus moving policy: Can scientists figure out how to do both?

NASA Astrophysics Data System (ADS)

Gleick, P. H.

2009-12-01

Global environmental issues are, well, global. Their complexity and scope make them among the most important issues of our time. Yet they are also among the most difficult to evaluate analytically and to communicate effectively. Scientists, when they choose to communicate with the public or policy makers at all, often find that their messages are often misunderstood, ignored, or simply marginalized, making public communications a less-than rewarding experience. Some methods, however, can prove more effective than others, and in the area of water resources and climate change, two approaches have proven especially effective. The first is to focus on “success stories” as a way to move the discussion from problems to solutions; the second is to focus on regional issues as a way to engage policy makers and the public, for whom the global scope of the challenges may be overwhelming. One additional complexity is how to deal with intentional efforts to obfuscate or misrepresent science. In the climate area, especially, this has long been a challenge, but successful approaches include refusing to let such efforts derail rational policy debates. This requires that scientists understand how science can be misrepresented or misused, and calling attention to such efforts. This presentation will summarize some successful communications efforts in the areas of climate and water from the experience of the Pacific Institute, a leading independent research group addressing these issues.

Bridging basic and clinical science with policy studies: The Partners with Transdisciplinary Tobacco Use Research Centers experience.

PubMed

Kobus, Kimberly; Mermelstein, Robin

2009-05-01

The Partners with Transdisciplinary Tobacco Use Research Centers (TTURCs) initiative was a transdisciplinary team-building program, funded by the Robert Wood Johnson Foundation, to expand the policy research capacity of the TTURCs. EXPANSION INTO POLICY RESEARCh: Policy research activities at the TTURCs fell into four broad domains: (a) health services research, (b) examination of the business case for cessation treatment and funding, (c) collaborative teams with key stakeholders, and (d) direct assessment of smoking-related policies. Examples of each domain are presented. Goals of the initiative included efforts to foster collaborative, transdisciplinary research, to bring new investigators into the field, to develop programs of policy research, to answer next-step translational questions, and to enhance awareness of policy relevance. Success at meeting each of these goals is discussed. We offer recommendations for incorporating programs of policy research into full-spectrum transdisciplinary research initiatives, including the roles of research teams, senior researchers, infrastructure, stakeholders, and communications activities. The TTURC Partners initiative represented a first-generation effort to fill the gap between scientific discovery and research translation through expansion into policy studies. While all aspects of the effort were not equally successful, the effort demonstrated that it is possible to develop successful collaborations that extend more basic and applied research into studies that examine their policy and practice implications.

Reclamation and revegetation along a 250-mile 500 kV power line corridor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffith, E.F.

1990-12-31

Reclamation and revegetation success along the Montana Power Company Colstrip to Deepdale 500 kV powerline was monitored from 1985 through 1989. Followup revegetation was hampered by inadequate road and tower site earth work as a result of premature release of the reclamation bond. Drought conditions in 1985 and 1988 seriously affected revegetation efforts, especially on difficult sites. Weed control improved markedly, and all ROW areas are weed free except those next to infested range and cropland where a major cooperative effort is needed to control weeds. Access roads in previously unroaded areas resulted in changes of access, management practices, andmore » cattle grazing behavior, all of which adversely affected revegetation success. Erosion, exacerbated by undersized culverts, the presence of very erodible soils, the occasional untrained contractor, is now the major ROW maintenance concern. Observation of the revegetation efforts clearly shows the need for adequate and appropriate reclamation by qualified equipment operators up front, and a patient, measured effort of continued revegetation, weed control and erosion control over the long term. The bond period of 5 years may not be long enough to achieve the 90 percent revegetation success required by the permit. Future projects guidelines should consider look to a flexible timeframe and more realistic vegetation requirements to account for the effects of non-construction related impacts.« less

Genetic diversity within honeybee colonies increases signal production by waggle-dancing foragers

PubMed Central

Mattila, Heather R; Burke, Kelly M; Seeley, Thomas D

2008-01-01

Recent work has demonstrated considerable benefits of intracolonial genetic diversity for the productivity of honeybee colonies: single-patriline colonies have depressed foraging rates, smaller food stores and slower weight gain relative to multiple-patriline colonies. We explored whether differences in the use of foraging-related communication behaviour (waggle dances and shaking signals) underlie differences in foraging effort of genetically diverse and genetically uniform colonies. We created three pairs of colonies; each pair had one colony headed by a multiply mated queen (inseminated by 15 drones) and one colony headed by a singly mated queen. For each pair, we monitored the production of foraging-related signals over the course of 3 days. Foragers in genetically diverse colonies had substantially more information available to them about food resources than foragers in uniform colonies. On average, in genetically diverse colonies compared with genetically uniform colonies, 36% more waggle dances were identified daily, dancers performed 62% more waggle runs per dance, foragers reported food discoveries that were farther from the nest and 91% more shaking signals were exchanged among workers each morning prior to foraging. Extreme polyandry by honeybee queens enhances the production of worker–worker communication signals that facilitate the swift discovery and exploitation of food resources. PMID:18198143

An adaptive mesh-moving and refinement procedure for one-dimensional conservation laws

NASA Technical Reports Server (NTRS)

Biswas, Rupak; Flaherty, Joseph E.; Arney, David C.

1993-01-01

We examine the performance of an adaptive mesh-moving and /or local mesh refinement procedure for the finite difference solution of one-dimensional hyperbolic systems of conservation laws. Adaptive motion of a base mesh is designed to isolate spatially distinct phenomena, and recursive local refinement of the time step and cells of the stationary or moving base mesh is performed in regions where a refinement indicator exceeds a prescribed tolerance. These adaptive procedures are incorporated into a computer code that includes a MacCormack finite difference scheme wih Davis' artificial viscosity model and a discretization error estimate based on Richardson's extrapolation. Experiments are conducted on three problems in order to qualify the advantages of adaptive techniques relative to uniform mesh computations and the relative benefits of mesh moving and refinement. Key results indicate that local mesh refinement, with and without mesh moving, can provide reliable solutions at much lower computational cost than possible on uniform meshes; that mesh motion can be used to improve the results of uniform mesh solutions for a modest computational effort; that the cost of managing the tree data structure associated with refinement is small; and that a combination of mesh motion and refinement reliably produces solutions for the least cost per unit accuracy.

Interdisciplinary collaboration: what private practice can learn from the health center experience.

PubMed

Hilton, Irene V

2014-01-01

Ideas on what medical-dental integration can look like on a practical level can be gained from studying efforts made in Federally Qualified Health Centers (Health Centers). Over the last 15 years, Health Centers have embarked on several initiatives that incorporated the development of infrastructure for medical-dental integration. This paper reviews these efforts and highlights successes, challenges and best practices that can bolster efforts in all dental practice settings.

Report of the Subcommittee on Military Justice in Combat Zones

DTIC Science & Technology

2013-05-30

required coordination through a civilian prosecuting authority. Criminal investigators also echoed this sentiment. Equally cumbersome is the...during deployment can be a source of frustration and friction that can erode morale. Arguably, culture equities should always be closely considered by...units to ensure equity and uniformity in discipline, and preserve the good order and discipline necessary for a successful

Promising Opportunities for Black and Latino Young Men: Findings from the Early Implementation of the Expanded Success Initiative. Technical Appendices

ERIC Educational Resources Information Center

Villavicencio, Adriana; Klevan, Sarah; Guidry, Brandon; Wulach, Suzanne

2014-01-01

This appendix describes the data collection and analytic processes used to develop the findings in the report "Promising Opportunities for Black and Latino Young Men." A central challenge was creating an analytic framework that could be uniformly applied to all schools, despite the individualized nature of their Expanded Success…

What Highly Effective Leaders Do during Difficult Times

ERIC Educational Resources Information Center

Raisor, Michael Louis

2011-01-01

The purpose of this study was to determine what the most highly effective leaders do during difficult times to be successful. The backdrop of the study was the 2009 $300 million cuts to the Indiana K-12 education budget, a uniform crisis that affected all 293 public school districts at the same time. The subjects in this study were those…

Fumigant distribution in forest nursery soil under water seal and plastic film after application of dazomet, metam-sodium and chloropicrin

Treesearch

Dong Wang; Stephen W. Fraedrich; Jennifer Juzwik; Kurt Spokas; Yi Zhang; William C. Koskinen

2006-01-01

Adequate concentration, exposure time and distribution uniformity of activated fumigant gases are prerequisites for successful soil fumigation. Field experiments were conducted to evaluate gas phase distributions of methyl isothiocyanate (MITC) and chloropicrin (CP) in two forest-tree nurseries. Concentrations of MITC and CP in soil air were measured from replicated...

Pulsed-coil magnet systems for applying uniform 10-30 T fields to centimeter-scale targets on Sandia's Z facility

NASA Astrophysics Data System (ADS)

Rovang, D. C.; Lamppa, D. C.; Cuneo, M. E.; Owen, A. C.; McKenney, J.; Johnson, D. W.; Radovich, S.; Kaye, R. J.; McBride, R. D.; Alexander, C. S.; Awe, T. J.; Slutz, S. A.; Sefkow, A. B.; Haill, T. A.; Jones, P. A.; Argo, J. W.; Dalton, D. G.; Robertson, G. K.; Waisman, E. M.; Sinars, D. B.; Meissner, J.; Milhous, M.; Nguyen, D. N.; Mielke, C. H.

2014-12-01

Sandia has successfully integrated the capability to apply uniform, high magnetic fields (10-30 T) to high energy density experiments on the Z facility. This system uses an 8-mF, 15-kV capacitor bank to drive large-bore (5 cm diameter), high-inductance (1-3 mH) multi-turn, multi-layer electromagnets that slowly magnetize the conductive targets used on Z over several milliseconds (time to peak field of 2-7 ms). This system was commissioned in February 2013 and has been used successfully to magnetize more than 30 experiments up to 10 T that have produced exciting and surprising physics results. These experiments used split-magnet topologies to maintain diagnostic lines of sight to the target. We describe the design, integration, and operation of the pulsed coil system into the challenging and harsh environment of the Z Machine. We also describe our plans and designs for achieving fields up to 20 T with a reduced-gap split-magnet configuration, and up to 30 T with a solid magnet configuration in pursuit of the Magnetized Liner Inertial Fusion concept.

Low-temperature graphene synthesis using microwave plasma CVD

NASA Astrophysics Data System (ADS)

Yamada, Takatoshi; Kim, Jaeho; Ishihara, Masatou; Hasegawa, Masataka

2013-02-01

The graphene chemical vapour deposition (CVD) technique at substrate temperatures around 300 °C by a microwave plasma sustained by surface waves (surface wave plasma chemical vapour deposition, SWP-CVD) is discussed. A low-temperature, large-area and high-deposition-rate CVD process for graphene films was developed. It was found from Raman spectra that the deposited films on copper (Cu) substrates consisted of high-quality graphene flakes. The fabricated graphene transparent conductive electrode showed uniform optical transmittance and sheet resistance, which suggests the possibility of graphene for practical electrical and optoelectronic applications. It is intriguing that graphene was successfully deposited on aluminium (Al) substrates, for which we did not expect the catalytic effect to decompose hydrocarbon and hydrogen molecules. We developed a roll-to-roll SWP-CVD system for continuous graphene film deposition towards industrial mass production. A pair of winder and unwinder systems of Cu film was installed in the plasma CVD apparatus. Uniform Raman spectra were confirmed over the whole width of 297 mm of Cu films. We successfully transferred the deposited graphene onto PET films, and confirmed a transmittance of about 95% and a sheet resistance of less than 7 × 105 Ω/sq.

Polymer powder processing of cryomilled polycaprolactone for solvent-free generation of homogeneous bioactive tissue engineering scaffolds.

PubMed

Lim, Jing; Chong, Mark Seow Khoon; Chan, Jerry Kok Yen; Teoh, Swee-Hin

2014-06-25

Synthetic polymers used in tissue engineering require functionalization with bioactive molecules to elicit specific physiological reactions. These additives must be homogeneously dispersed in order to achieve enhanced composite mechanical performance and uniform cellular response. This work demonstrates the use of a solvent-free powder processing technique to form osteoinductive scaffolds from cryomilled polycaprolactone (PCL) and tricalcium phosphate (TCP). Cryomilling is performed to achieve micrometer-sized distribution of PCL and reduce melt viscosity, thus improving TCP distribution and improving structural integrity. A breakthrough is achieved in the successful fabrication of 70 weight percentage of TCP into a continuous film structure. Following compaction and melting, PCL/TCP composite scaffolds are found to display uniform distribution of TCP throughout the PCL matrix regardless of composition. Homogeneous spatial distribution is also achieved in fabricated 3D scaffolds. When seeded onto powder-processed PCL/TCP films, mesenchymal stem cells are found to undergo robust and uniform osteogenic differentiation, indicating the potential application of this approach to biofunctionalize scaffolds for tissue engineering applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Study on the Development of a Robot-Assisted Automatic Laser Hair Removal System

PubMed Central

Lim, Hyoung-woo; Park, Sungwoo; Noh, Seungwoo; Lee, Dong-Hun; Yoon, Chiyul; Koh, Wooseok; Kim, Youdan; Chung, Jin Ho; Kim, Hee Chan

2014-01-01

Abstract Background and Objective: The robot-assisted automatic laser hair removal (LHR) system is developed to automatically detect any arbitrary shape of the desired LHR treatment area and to provide uniform laser irradiation to the designated skin area. Methods: For uniform delivery of laser energy, a unit of a commercial LHR device, a laser distance sensor, and a high-resolution webcam are attached at the six axis industrial robot's end-effector, which can be easily controlled using a graphical user interface (GUI). During the treatment, the system provides real-time treatment progress as well as the total number of “pick and place” automatically. Results: During the test, it was demonstrated that the arbitrary shapes were detected, and that the laser was delivered uniformly. The localization error test and the area-per-spot test produced satisfactory outcome averages of 1.04 mm error and 38.22 mm2/spot, respectively. Conclusions: Results showed that the system successfully demonstrated accuracy and effectiveness. The proposed system is expected to become a promising device in LHR treatment. PMID:25343281

A study on the development of a robot-assisted automatic laser hair removal system.

PubMed

Lim, Hyoung-Woo; Park, Sungwoo; Noh, Seungwoo; Lee, Dong-Hun; Yoon, Chiyul; Koh, Wooseok; Kim, Youdan; Chung, Jin Ho; Kim, Hee Chan; Kim, Sungwan

2014-11-01

Abstract Background and Objective: The robot-assisted automatic laser hair removal (LHR) system is developed to automatically detect any arbitrary shape of the desired LHR treatment area and to provide uniform laser irradiation to the designated skin area. For uniform delivery of laser energy, a unit of a commercial LHR device, a laser distance sensor, and a high-resolution webcam are attached at the six axis industrial robot's end-effector, which can be easily controlled using a graphical user interface (GUI). During the treatment, the system provides real-time treatment progress as well as the total number of "pick and place" automatically. During the test, it was demonstrated that the arbitrary shapes were detected, and that the laser was delivered uniformly. The localization error test and the area-per-spot test produced satisfactory outcome averages of 1.04 mm error and 38.22 mm(2)/spot, respectively. RESULTS showed that the system successfully demonstrated accuracy and effectiveness. The proposed system is expected to become a promising device in LHR treatment.

Silicon direct bonding approach to high voltage power device (insulated gate bipolar transistors)

NASA Astrophysics Data System (ADS)

Cha, Giho; Kim, Youngchul; Jang, Hyungwoo; Kang, Hyunsoon; Song, Changsub

2001-10-01

Silicon direct bonding technique was successfully applied for the fabrication of high voltage IGBT (Insulated Gate Bipolar Transistor). In this work, 5 inch, p-type CZ wafer for handle wafer and n-type FZ wafer for device wafer were used and bonding the two wafers was performed at reduced pressure (1mmTorr) using a modified vacuum bonding machine. Since the breakdown voltage in high voltage device has been determined by the remained thickness of device layer, grinding and CMP steps should be carefully designed in order to acquire better uniformity of device layer. In order to obtain the higher removal rate and the final better uniformity of device layer, the harmony of the two processes must be considered. We found that the concave type of grinding profile and the optimal thickness of ground wafer was able to reduce the process time of CMP step and also to enhance the final thickness uniformity of device layer up to +/- 1%. Finally, when compared epitaxy layer with SDB wafer, the SDB wafer was found to be more favorable in terms of cost and electrical characteristics.

On approximately symmetric informationally complete positive operator-valued measures and related systems of quantum states

NASA Astrophysics Data System (ADS)

Klappenecker, Andreas; Rötteler, Martin; Shparlinski, Igor E.; Winterhof, Arne

2005-08-01

We address the problem of constructing positive operator-valued measures (POVMs) in finite dimension n consisting of n2 operators of rank one which have an inner product close to uniform. This is motivated by the related question of constructing symmetric informationally complete POVMs (SIC-POVMs) for which the inner products are perfectly uniform. However, SIC-POVMs are notoriously hard to construct and, despite some success of constructing them numerically, there is no analytic construction known. We present two constructions of approximate versions of SIC-POVMs, where a small deviation from uniformity of the inner products is allowed. The first construction is based on selecting vectors from a maximal collection of mutually unbiased bases and works whenever the dimension of the system is a prime power. The second construction is based on perturbing the matrix elements of a subset of mutually unbiased bases. Moreover, we construct vector systems in Cn which are almost orthogonal and which might turn out to be useful for quantum computation. Our constructions are based on results of analytic number theory.

A novel recursive Fourier transform for nonuniform sampled signals: application to heart rate variability spectrum estimation.

PubMed

Holland, Alexander; Aboy, Mateo

2009-07-01

We present a novel method to iteratively calculate discrete Fourier transforms for discrete time signals with sample time intervals that may be widely nonuniform. The proposed recursive Fourier transform (RFT) does not require interpolation of the samples to uniform time intervals, and each iterative transform update of N frequencies has computational order N. Because of the inherent non-uniformity in the time between successive heart beats, an application particularly well suited for this transform is power spectral density (PSD) estimation for heart rate variability. We compare RFT based spectrum estimation with Lomb-Scargle Transform (LST) based estimation. PSD estimation based on the LST also does not require uniform time samples, but the LST has a computational order greater than Nlog(N). We conducted an assessment study involving the analysis of quasi-stationary signals with various levels of randomly missing heart beats. Our results indicate that the RFT leads to comparable estimation performance to the LST with significantly less computational overhead and complexity for applications requiring iterative spectrum estimations.

Nonlinear effects of group size on the success of wolves hunting elk

USGS Publications Warehouse

MacNulty, Daniel R.; Smith, Douglas W.; Mech, L. David; Vucetich, John A.; Packer, Craig

2012-01-01

Despite the popular view that social predators live in groups because group hunting facilitates prey capture, the apparent tendency for hunting success to peak at small group sizes suggests that the formation of large groups is unrelated to prey capture. Few empirical studies, however, have tested for nonlinear relationships between hunting success and group size, and none have demonstrated why success trails off after peaking. Here, we use a unique dataset of observations of individually known wolves (Canis lupus) hunting elk (Cervus elaphus) in Yellowstone National Park to show that the relationship between success and group size is indeed nonlinear and that individuals withholding effort (free riding) is why success does not increase across large group sizes. Beyond 4 wolves, hunting success leveled off, and individual performance (a measure of effort) decreased for reasons unrelated to interference from inept hunters, individual age, or size. But performance did drop faster among wolves with an incentive to hold back, i.e., nonbreeders with no dependent offspring, those performing dangerous predatory tasks, i.e., grabbing and restraining prey, and those in groups of proficient hunters. These results suggest that decreasing performance was free riding and that was why success leveled off in groups with >4 wolves that had superficially appeared to be cooperating. This is the first direct evidence that nonlinear trends in group hunting success reflect a switch from cooperation to free riding. It also highlights how hunting success per se is unlikely to promote formation and maintenance of large groups.

Design and Analyses of High Aspect Ratio Nozzles for Distributed Propulsion Acoustic Measurements

NASA Technical Reports Server (NTRS)

Dippold, Vance F., III

2016-01-01

A series of three convergent, round-to-rectangular high aspect ratio (HAR) nozzles were designed for acoustic testing at the NASA Glenn Research Center Nozzle Acoustic Test Rig (NATR). The HAR nozzles had exit area aspect ratios of 8:1, 12:1, and 16:1. The nozzles were designed to mimic a distributed propulsion system array with a slot nozzle. The nozzle designs were screened using Reynolds-Averaged Navier-Stokes (RANS) simulations. In addition to meeting the geometric constraints required for testing in the NATR, the HAR nozzles were designed to be free of flow features that would produce unwanted noise (e.g., flow separations) and to have uniform flow at the nozzle exit. Multiple methods were used to generate HAR nozzle designs. The final HAR nozzle designs were generated in segments using a computer code that parameterized each segment. RANS screening simulations showed that intermediate nozzle designs suffered flow separation, a normal shockwave at the nozzle exit (caused by an aerodynamic throat produced by boundary layer growth), and non-uniform flow at the nozzle exit. The RANS simulations showed that the final HAR nozzle designs were free of flow separations, but were not entirely successful at producing a fully uniform flow at the nozzle exit. The final designs suffered a pair of counter-rotating vortices along the outboard walls of the nozzle. The 16:1 aspect ratio HAR nozzle had the least uniform flow at the exit plane; the 8:1 aspect ratio HAR nozzles had a fairly uniform flow at the nozzle exit plane.

A proposal for the use of uniform diagnostic criteria for gestational diabetes in Europe: an opinion paper by the European Board & College of Obstetrics and Gynaecology (EBCOG).

PubMed

Benhalima, Katrien; Mathieu, Chantal; Damm, Peter; Van Assche, André; Devlieger, Roland; Desoye, Gernot; Corcoy, Rosa; Mahmood, Tahir; Nizard, Jacky; Savona-Ventura, Charles; Dunne, Fidelma

2015-07-01

Screening and diagnostic criteria for gestational diabetes (GDM) are inconsistent across Europe, and the development of a uniform GDM screening strategy is necessary. Such a strategy would create opportunities for more women to receive timely treatment for GDM. Developing a consensus on screening for GDM in Europe is challenging, as populations are diverse and healthcare delivery systems also differ. The European Board & College of Obstetrics and Gynaecology (EBCOG) has responded to this challenge by appointing a steering committee, including members of the EBCOG and the Diabetic Pregnancy Study Group (DPSG) associated with the EASD, to develop a proposal for the use of uniform diagnostic criteria for GDM in Europe. A proposal has been developed and has now been approved by the Council of the EBCOG. The current proposal is to screen for overt diabetes at the first prenatal contact using cut-off values for diabetes outside pregnancy, with particular efforts made to screen high-risk groups. When screening for GDM is performed at 24 weeks' gestation or later, the proposal is now to use the 75 g OGTT with the new WHO diagnostic criteria for GDM. However, more research is necessary to evaluate the best GDM screening strategy for different populations in Europe. Therefore, no clear recommendation has been made on whether a universal one-step, two-step or a risk-factor-based screening approach should be used. The use of the same WHO diagnostic GDM criteria across Europe will be an important step towards uniformity.

Comparisons of luminaires: Efficacies and system design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albright, L.D.; Both, A.J.

1994-12-31

After reviewing basic information, three design examples have been presented to demonstrate a process of supplemental lighting design. The sequences of each example suggest careful thought and analysis are required to obtain supplemental lighting designs that provide both high levels of PAR and suitable uniformity. The end results should suggest how an analysis can evolve to achieve desired results, and the types of tools and adjustments required. It appears possible to design research greenhouses and plant growth chambers to achieve a {+-}10% PAR uniformity using HIPS luminaires. Further, HPS luminaires (and, by extension, NEHD, etc.) are required to achieve highmore » PAR levels and have the decided advantage of providing the possibility of aiming, which reduces the region of the {open_quotes}edge effect{close_quotes}. Further, for designing plant lighting systems, a modification of the standard IES luminaire data file structure is potentially useful. Luminaire installation is an important factor to obtain PAR uniformity. Spacing and mounting height are critically important. Additionally, the mounting angle of each luminaire must be carefully adjusted to conform with design assumptions. This is true for both plant growth chambers and greenhouses. Surface reflectances are particularly important when designing for small lighted regions such as plant growth chambers and research greenhouses. It is not obvious, just from looking at a surface, what its reflectance is. It is suggested that an effort be mounted to develop valid surface reflectance data to be used by designers. The importance of the surfaces (particularly the walls) in achieving PAR uniformity suggests the importance of periodic cleaning/maintenance to retain initial reflectance values.« less

Measuring and Reporting Performance Results for the Pollution Prevention Program Need Improvement Report No. 09-P-0088

EPA Pesticide Factsheets

Measuring results is an essential component of any successful P2 program and is one way to determine the success of a technical assistance or training effort. This page introduces the concept of P2 measurement.

Book Review: Large-Scale Ecosystem Restoration: Five Case Studies from the United States

EPA Science Inventory

Broad-scale ecosystem restoration efforts involve a very complex set of ecological and societal components, and the success of any ecosystem restoration project rests on an integrated approach to implementation. Editors Mary Doyle and Cynthia Drew have successfully synthesized ma...

Designing divertor targets for uniform power load

NASA Astrophysics Data System (ADS)

Dekeyser, W.; Reiter, D.; Baelmans, M.

2015-08-01

Divertor design for next step fusion reactors heavily relies on 2D edge plasma modeling with codes as e.g. B2-EIRENE. While these codes are typically used in a design-by-analysis approach, in previous work we have shown that divertor design can alternatively be posed as a mathematical optimization problem, and solved very efficiently using adjoint methods adapted from computational aerodynamics. This approach has been applied successfully to divertor target shape design for more uniform power load. In this paper, the concept is further extended to include all contributions to the target power load, with particular focus on radiation. In a simplified test problem, we show the potential benefits of fully including the radiation load in the design cycle as compared to only assessing this load in a post-processing step.

3D plasmonic transducer based on gold nanoparticles produced by laser ablation on silica nanowires

NASA Astrophysics Data System (ADS)

Gontad, F.; Caricato, A. P.; Manera, M. G.; Colombelli, A.; Resta, V.; Taurino, A.; Cesaria, M.; Leo, C.; Convertino, A.; Klini, A.; Perrone, A.; Rella, R.; Martino, M.

2016-05-01

Silica two-dimensional substrates and nanowires (NWs) forests have been successfully decorated with Au nanoparticles (NPs) through laser ablation by using a pulsed ArF excimer laser, for sensor applications. A uniform coverage of both substrate surfaces with NPs has been achieved controlling the number of laser pulses. The annealing of the as-deposited particles resulted in a uniform well-defined distribution of spherical NPs with an increased average diameter up to 25 nm. The deposited samples on silica NWs forest present a very good plasmonic resonance which resulted to be very sensitive to the changes of the environment (ethanol/water solutions with increasing concentration of ethanol) allowing the detection of changes on the second decimal digit of the refractive index, demonstrating its potentiality for further biosensing functionalities.

Reactive modification of polyesters and their blends

NASA Astrophysics Data System (ADS)

Wan, Chen

2004-12-01

As part of a broader research effort to investigate the chemical modification of polyesters by reactive processing a low molecular weight (MW) unsaturated polyester (UP) and a higher MW saturated polyester, polyethylene terephthalate (PET), alone or blended with polypropylene (PP) were melt processed in a batch mixer and continuous twin screw extruders. Modification was monitored by on-line rheology and the products were characterized primarily by off-line rheology, morphology and thermal analysis. Efforts were made to establish processing/property relationships and provide an insight of the accompanying structural changes. The overall response of the reactively modified systems was found to be strongly dependent on the component characteristics, blend composition, type and concentrations of reactive additives and processing conditions. The work concluded that UP can be effectively modified through reactive melt processing. Its melt viscosity and MW can be increased through chemical reactions between organic peroxides (POX) and chain unsaturation or between MgO and carboxyl/hydroxyl end groups. Reactive blending of PP/UP blends through peroxide modification gave finer and more uniform morphology than unreacted blends and at a given PP/UP weight ratio more thermoplastic elastomers-like rheological behavior. This is due to the continuously decreasing viscosity ratio of PP/UP towards unity by the competing reactions between POX and the blend components and formation of PP-UP copolymers which serve as in-situ compatibilizers to promote better interfacial adhesion. Kinetics of the competing reactions were analyzed through a developed model. In addition to POX concentration and mixing efficiency, rheology and morphology of UP/PP bends were significantly affected by the addition of inorganic and organic coagents. Addition of coagents such as a difunctional maleimide, MgO and/or an anhydride functionalized PP during reactive blending offers effective means for tailoring the desired rheological and structural characteristics of the final products for potential applications such as low density extrusion foaming or compatibilization of immiscible polymer blends. Important modification conditions through coagents are identified and reaction mechanisms are proposed. A high MW saturated polyester, PET, can also be rheologically modified in extruders through low MW multifunctional anhydride and epoxy compounds by chain extension/branching. Several such modifiers were successfully screened in terms of their reactivity towards PET under controlled reactive extrusion conditions. A dianhydride with medium reactivity was then successfully used in a one-step reactive modification/extrusion foaming process to produce low density foams. A similar process was successfully used to produce small cell size foams from a four component system containing PET, PP and lesser amounts of a low molecular weight multifunctional epoxy compound and an acid functionalized polyolefin, the latter acting as compatibilizers.

Streamline three-dimensional thermal model of a lithium titanate pouch cell battery in extreme temperature conditions with module simulation

NASA Astrophysics Data System (ADS)

Jaguemont, Joris; Omar, Noshin; Martel, François; Van den Bossche, Peter; Van Mierlo, Joeri

2017-11-01

In this paper, the development of a three-dimensional (3D) lithium titanium oxide (LTO) pouch cell is presented to first better comprehend its thermal behavior within electrified vehicle applications, but also to propose a strong modeling base for future thermal management system. Current 3D-thermal models are based on electrochemical reactions which are in need for elaborated meshing effort and long computational time. There lacks a fast electro-thermal model which can capture voltage, current and thermal distribution variation during the whole process. The proposed thermal model is a reduce-effort temperature simulation approach involving a 0D-electrical model accommodating a 3D-thermal model to exclude electrochemical processes. The thermal model is based on heat-transfer theory and its temperature distribution prediction incorporates internal conduction and heat generation effect as well as convection. In addition, experimental tests are conducted to validate the model. Results show that both the heat dissipation rate and surface temperature uniformity data are in agreement with simulation results, which satisfies the application requirements for electrified vehicles. Additionally, a LTO battery pack sizing and modeling is also designed, applied and displays a non-uniformity of the cells under driving operation. Ultimately, the model will serve as a basis for the future development of a thermal strategy for LTO cells that operate in a large temperature range, which is a strong contribution to the existing body of scientific literature.

Novel processing to produce polymer/ceramic nanocomposites by atomic layer deposition

NASA Astrophysics Data System (ADS)

Liang, Xinhua

Polymeric materials can be greatly influenced by nanoscale inclusions of inorganic materials. The main goal of this thesis is to fabricate novel polymer/ceramic composite materials for two different applications using atomic layer deposition (ALD) or molecular layer deposition (MLD) methods. One is to produce well-dispersed polymer/ceramic nanocomposites with improved barrier properties for packaging applications. The other is to produce porous polymer/ceramic composites with improved bioactivity for tissue engineering applications. ALD has been successfully utilized for the conformal and uniform deposition of ultra-thin alumina and titania films on primary micron-sized polymer particles. The mechanism to initiate alumina and titania ALD on polymer particles without chemical functional groups was confirmed. A nucleation period was needed for both alumina and titania ALD on high density polyethylene (HDPE) particles and no nucleation period was needed for alumina ALD on polymethyl methacrylate particles. Titania ALD films deposited at low temperatures had an amorphous structure and showed much weaker photoactivity than common pigment-grade anatase TiO2 particles. Highly uniform and conformal ultra-thin aluminum alkoxide (alucone) polymer films were deposited on primary silica and titania nanoparticles using MLD in a fluidized bed reactor. The deposition chemistry and properties of alucone MLD films were investigated. The photoactivity of pigment-grade TiO2 particles was quenched after 20 cycles of an alucone MLD film, but the films shrank and decomposed in the presence of water, which decreased the passivation effect of the photoactivity of TiO2 particles. Well-dispersed polymer/ceramic nanocomposites were obtained by extruding alumina ALD coated HDPE particles. The diffusion coefficient of the fabricated nanocomposite membranes can be reduced by half with the inclusion of 7.3 vol.% alumina flakes. However, a corresponding increase in permeability was also observed due to the voids formed at or near the interface of the polymer and alumina flakes during the extrusion process. Efforts to improve the barrier properties of the membranes included 3-aminopropyltriethoxysilane treatment and coating alucone MLD films on alumina coated particles prior to extrusion. The porous polymer/ceramic particles were synthesized by depositing ultra-thin alumina or titania films on highly porous poly(styrene-divinylbenzene) particles using a low-temperature ALD process. Analytical characterization revealed that conformal alumina and titania films were grown on internal and external polymer particle surfaces, and the pore filling mechanism was a uniform coating of the pore walls. The ALD layers can improve the bioactivity and protein adsorption of the polymer substrates.

Range-wide success of red-cockaded woodpecker translocations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, John W; Costa, Ralph

2004-12-31

Edwards, John W.; Costa, Ralph. 2004. Range-wide success of red-cockaded woodpecker translocations. In: Red-cockaded woodpecker; Road to Recovery. Proceedings of the 4th Red-cockaded woodpecker Symposium. Ralph Costa and Susan J. Daniels, eds. Savannah, Georgia. January, 2003. Chapter 6. Translocation. Pp 307-311. Abstract: Red-cockaded woodpeckers (Picoides borealis) have declined range-wide during the past century, suffering from habitat loss and the effects of fire exclusion in older southern pine forests. Red-cockaded woodpecker translocations are a potentially important tool in conservation efforts to reestablish red-cockaded woodpeckers in areas from which they have been extirpated. Currently, translocations are critical in ongoing efforts to savemore » and restore the many existing small populations. We examined the effects of demographic and environmental factors on the range-wide success of translocations between 1989 and 1995.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, X., E-mail: Xiujuan.jiang@pnnl.gov

Soft magnetic materials are often limited in scalability due to conventional processes that do not retain beneficial microstructures, and their associated physical properties, during densification. In this work, friction consolidation (FC) has been studied to fabricate Fe−Si soft magnetic materials from gas-atomized powder precursors. Fe−Si powder is consolidated using variable pressure and tool rotation speed in an effort to evaluate this unique densification approach for potential improvements in magnetic properties. FC, due to the high shear deformation involved, is shown to result in uniform gradual grain structure refinement across the consolidated workpiece from the center nearest the tool to themore » edge. Magnetic properties along different orientations indicate little, if any, textural orientation in the refined grain structure. The effect of annealing on the magnetic properties is evaluated and shown to decrease coercivity. FC processing was able to retain the magnetization of the original gas-atomized powders but further process optimization is needed to reach the optimal coercivity for the soft magnetic materials applications. - Highlights: •Friction stir processing was utilized to consolidate Fe−Si soft magnetic powders. •The resultant microstructure and magnetic properties were correlated to the processing conditions. •Friction consolidation refined the grain size of the materials by ~ 40%. •Annealing successfully reduced the coercivity induced by the stress during processing. •The results shine light on the possible scaling up of nanostructured materials.« less

Multi-Disciplinary Management of Athletes with Post-Concussion Syndrome: An Evolving Pathophysiological Approach.

PubMed

Ellis, Michael J; Leddy, John; Willer, Barry

2016-01-01

Historically, patients with sports-related concussion (SRC) have been managed in a uniform fashion consisting mostly of prescribed physical and cognitive rest with the expectation that all symptoms will spontaneously resolve with time. Although this approach will result in successful return to school and sports activities in the majority of athletes, an important proportion will develop persistent concussion symptoms characteristic of post-concussion syndrome (PCS). Recent advances in exercise science, neuroimaging, and clinical research suggest that the clinical manifestations of PCS are mediated by unique pathophysiological processes that can be identified by features of the clinical history and physical examination as well as the use of graded aerobic treadmill testing. Athletes who develop PCS represent a unique population whose care must be individualized and must incorporate a rehabilitative strategy that promotes enhanced recovery of concussion-related symptoms while preventing physical deconditioning. In this review, we present our evolving evidence-based approach to evaluation and management of athletes with PCS that aims to identify the pathophysiological mechanisms mediating persistent concussion symptoms and guides the initiation of individually tailored rehabilitation programs that target these processes. In addition, we outline the important qualified roles that multi-disciplinary healthcare professionals can play in the management of this patient population, and discuss where future research efforts must be focused to further evaluate this evolving pathophysiological approach.

Multi-Disciplinary Management of Athletes with Post-Concussion Syndrome: An Evolving Pathophysiological Approach

PubMed Central

Ellis, Michael J.; Leddy, John; Willer, Barry

2016-01-01

Historically, patients with sports-related concussion (SRC) have been managed in a uniform fashion consisting mostly of prescribed physical and cognitive rest with the expectation that all symptoms will spontaneously resolve with time. Although this approach will result in successful return to school and sports activities in the majority of athletes, an important proportion will develop persistent concussion symptoms characteristic of post-concussion syndrome (PCS). Recent advances in exercise science, neuroimaging, and clinical research suggest that the clinical manifestations of PCS are mediated by unique pathophysiological processes that can be identified by features of the clinical history and physical examination as well as the use of graded aerobic treadmill testing. Athletes who develop PCS represent a unique population whose care must be individualized and must incorporate a rehabilitative strategy that promotes enhanced recovery of concussion-related symptoms while preventing physical deconditioning. In this review, we present our evolving evidence-based approach to evaluation and management of athletes with PCS that aims to identify the pathophysiological mechanisms mediating persistent concussion symptoms and guides the initiation of individually tailored rehabilitation programs that target these processes. In addition, we outline the important qualified roles that multi-disciplinary healthcare professionals can play in the management of this patient population, and discuss where future research efforts must be focused to further evaluate this evolving pathophysiological approach. PMID:27605923

Morphometric variability within the axial zone of the southern Juan de Fuca Ridge: Interpretation from Sea MARC II, Sea MARC I, and deep-sea photography

USGS Publications Warehouse

Kappel, Ellen S.; Normark, William R.

1987-01-01

The morphometric characteristics of the axial regions of oceanic spreading centers are determined by (1) the type of volcanic flows, (2) the relation between primary volcanic relief (on a scale of a few meters to tens of meters) and degree of sediment cover, and (3) the extent of surficial expression and timing of tectonic disruption of the young oceanic crust. Even within a single, continuous, linear spreading-ridge segment with relatively uniform axial valley dimensions over a distance of 50 or more kilometers, such as along the southern Juan de Fuca Ridge, the changes in morphometric characteristics along axis within the youngest crust indicate distinct variation in tectonic and volcanic activity over short distances within short time periods. An integrated analysis of Sea MARC I, Sea MARC II, and photographic data for the southernmost continuous segment of the Juan de Fuca Ridge shows that generalizations about tectonic and volcanic processes at spreading ridges must consider both the temporal scale of processes as well as the physical scales of observations if predictive models are to be successful. Comparison of the morphometric expression within the major hydrothermal vent area and the rest of the southernmost ridge segment suggests that the mapped distribution of hydrothermal vents may reflect the extent of survey effort rather than uniqueness of geologic setting.

PURPA from coast to coast: America`s great electricity experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Callaghan, D.; Greenwald, S.

The state governments of the United States have often been called a great political laboratory for policy experimentation on matters where our many states with their diverse peoples, interests, and resources might have differing views and prefer different approaches to similar opportunities and challenges. When the nature of such policy matters have not required or received a uniform {open_quotes}federal{close_quotes} response, American federalism, either by active invitation or passive permission, has often resulted in state-by-state policy responses. These varied responses usually achieve widely varying programmatic results but they almost always have at least two positive products: (1) they satisfy the incessantmore » human desire to move the decisionmaking power closer to home, and (2) they stimulate governmental creativity and increase our collective experimential wisdom earned through success and failure in our efforts. This article focuses on the Public Utility Regulatory Policies Acts. The federal government identified and prioritized problems related to a mater of significant national interest and required the states to address matters central to these problems, but permitting them to do so in a wide variety of ways. The topics are as follows: PURPA - an introduction; the Maine PURPA Experience; the California PURPA experience; the beginnings - early 1980s; the transitional period latter 1980s; the 1990s-BRPU, Excess capacity, restructuring.« less

Optical design considerations for high-concentration photovoltaics

NASA Astrophysics Data System (ADS)

Garboushian, Vahan; Gordon, Robert

2006-08-01

Over the past 15 years, major advances in Concentrating Photovoltaics (CPV) have been achieved. Ultra-efficient Si solar cells have produced commercial concentration systems which are being fielded today and are competitively priced. Advanced research has primarily focused on significantly more efficient multi-junction solar cells for tomorrow's systems. This effort has produced sophisticated solar cells that significantly improve power production. Additional performance and cost improvements, especially in the optical system area and system integration, must be made before CPV can realize its ultimate commercial potential. Structural integrity and reliability are vital for commercial success. As incremental technical improvements are made in solar cell technologies, evaluation and 'fine-tuning' of optical systems properly matched to the solar cell are becoming increasingly necessary. As we move forward, it is increasingly important to optimize all of the interrelated elements of a CPV system for high performance without sacrificing the marketable cost and structural requirements of the system. Areas such as wavelength absorption of refractive optics need to be carefully matched to the solar cell technology employed. Reflective optics require advanced engineering models to insure uniform flux distribution without excessive losses. In Situ measurement of the 'fine-grain' improvements are difficult as multiple variables such as solar insolation, temperature, wind, altitude, etc. infringe on analytical data. This paper discusses design considerations based on 10 years of field trials of high concentration systems and their relevance for tomorrow's advanced CPV systems.

Robotic surgical skill acquisition: What one needs to know?

PubMed Central

Sood, Akshay; Jeong, Wooju; Ahlawat, Rajesh; Campbell, Logan; Aggarwal, Shruti; Menon, Mani; Bhandari, Mahendra

2015-01-01

Robotic surgery has been eagerly adopted by patients and surgeons alike in the field of urology, over the last decade. However, there is a lack of standardization in training curricula and accreditation guidelines to ensure surgeon competence and patient safety. Accordingly, in this review, we aim to highlight ‘who’ needs to learn ‘what’ and ‘how’, to become competent in robotic surgery. We demonstrate that both novice and experienced open surgeons require supervision and mentoring during the initial phases of robotic surgery skill acquisition. The experienced open surgeons possess domain knowledge, however, need to acquire technical knowledge under supervision (either in simulated or clinical environment) to successfully transition to robotic surgery, whereas, novice surgeons need to acquire both domain as well as technical knowledge to become competent in robotic surgery. With regard to training curricula, a variety of training programs such as academic fellowships, mini-fellowships, and mentored skill courses exist, and cater to the needs and expectations of postgraduate surgeons adequately. Fellowships provide the most comprehensive training, however, may not be suitable to all surgeon-learners secondary to the long-term time commitment. For these surgeon-learners short-term courses such as the mini-fellowships or mentored skill courses might be more apt. Lastly, with regards to credentialing uniformity in criteria regarding accreditation is lacking but earnest efforts are underway. Currently, accreditation for competence in robotic surgery is institutional specific. PMID:25598593

Robotic surgical skill acquisition: What one needs to know?

PubMed

Sood, Akshay; Jeong, Wooju; Ahlawat, Rajesh; Campbell, Logan; Aggarwal, Shruti; Menon, Mani; Bhandari, Mahendra

2015-01-01

Robotic surgery has been eagerly adopted by patients and surgeons alike in the field of urology, over the last decade. However, there is a lack of standardization in training curricula and accreditation guidelines to ensure surgeon competence and patient safety. Accordingly, in this review, we aim to highlight 'who' needs to learn 'what' and 'how', to become competent in robotic surgery. We demonstrate that both novice and experienced open surgeons require supervision and mentoring during the initial phases of robotic surgery skill acquisition. The experienced open surgeons possess domain knowledge, however, need to acquire technical knowledge under supervision (either in simulated or clinical environment) to successfully transition to robotic surgery, whereas, novice surgeons need to acquire both domain as well as technical knowledge to become competent in robotic surgery. With regard to training curricula, a variety of training programs such as academic fellowships, mini-fellowships, and mentored skill courses exist, and cater to the needs and expectations of postgraduate surgeons adequately. Fellowships provide the most comprehensive training, however, may not be suitable to all surgeon-learners secondary to the long-term time commitment. For these surgeon-learners short-term courses such as the mini-fellowships or mentored skill courses might be more apt. Lastly, with regards to credentialing uniformity in criteria regarding accreditation is lacking but earnest efforts are underway. Currently, accreditation for competence in robotic surgery is institutional specific.

The Ties that Bind: Presidential Involvement with the Development of NCAA Division I Initial Eligibility Legislation.

ERIC Educational Resources Information Center

Covell, Dan; Barr, Carol A.

2001-01-01

Provides a chronology of college presidential efforts to deal with conflicts related to reconciliation of academic mission and athletic success through development of National Collegiate Athletic Association (NCAA) initial eligibility academic legislation. Analyzes these efforts in terms of maintaining congruence within the constituency-based…

Attributional Bias Instrument (ABI): Validation of a Measure to Assess Ability and Effort Explanations for Math Performance

ERIC Educational Resources Information Center

Espinoza, Penelope P.; Quezada, Stephanie A.; Rincones, Rodolfo; Strobach, E. Natalia; Gutierrez, Maria Armida Estrada

2012-01-01

The present work investigates the validation of a newly developed instrument, the attributional bias instrument, based on achievement attribution theories that distinguish between effort and ability explanations of behavior. The instrument further incorporates the distinction between explanations for success versus failure in academic performance.…

The State Role in School Turnaround: Emerging Best Practices

ERIC Educational Resources Information Center

Rhim, Lauren Morando, Ed.; Redding, Sam, Ed.

2014-01-01

This publication explores the role of the state education agency (SEA) in school turnaround efforts. An emphasis is placed on practical application of research and best practices related to the SEA's critical leadership role in driving and supporting successful school turnaround efforts. The publication is organized around the four goals of…

Education as Anti-Structure: Non-Formal Education in Social and Ethnic Movements.

ERIC Educational Resources Information Center

Paulston, Rolland G.

The article describes how folk educational programs in the United States and in the Scandinavian countries work toward behavioral and social change efforts. The conditions under which collective change efforts create their own educational programs, the most effective pedagogical processes, and the variables associated with successful attempts to…

The Hmong Resettlement Study Site Report: Providence, Rhode Island.

ERIC Educational Resources Information Center

Finck, John

This document reports on the resettlement of Hmong refugees in Providence, Rhode Island: what their employment experiences have been, which resettlement efforts have been successful, and how current resettlement efforts could be altered to improve the Hmong's long-term adjustment. The report is part of a larger, national project on Hmong…

Electronic Imaging in Admissions, Records & Financial Aid Offices.

ERIC Educational Resources Information Center

Perkins, Helen L.

Over the years, efforts have been made to work more efficiently with the ever increasing number of records and paper documents that cross workers' desks. Filing records on optical disk through electronic imaging is an alternative that many feel is the answer to successful document management. The pioneering efforts in electronic imaging in…

A Model for Alumni Participation in Student Recruitment. AIR Forum 1980 Paper.

ERIC Educational Resources Information Center

Habben, Dorothy E.; Stewart, Clifford T.

A model is presented for constructing and evaluating an effective alumni volunteer program to aid in the student recruitment effort. A review of successful programs reveals certain common features and provides important touchstones for other schools looking for the principles and practices with which to organize their own efforts. The first…

Magic, Myth and Minority Scientists.

ERIC Educational Resources Information Center

Ortiz de Montellano, Bernard R.

Optimum time for efforts to attract minority students to a science career is when the students are enrolled in grade school and junior high school rather than at undergraduate and graduate levels, where many present programs are aimed. Student population is at its maximum in grade school, and successful efforts will reduce the amount of remedial…

Implementing RTI in a High School: A Case Study

ERIC Educational Resources Information Center

Fisher, Douglas; Frey, Nancy

2013-01-01

This case study chronicles the efforts of a small high school over a 2-year period as it designed and implemented a response to intervention (RTI) program for students at the school. Their efforts were largely successful, with improved achievement, attendance, and grade point averages and a decrease in special education referrals. Major themes…

Involving indigenous peoples in protected area management: comparative perspectives from Nepal, Thailand, and China.

PubMed

Nepal, Sanjay K

2002-12-01

Despite over two decades of efforts towards involving indigenous and traditional peoples in protected area management, there are few successful examples. Several international principles and guidelines on indigenous peoples' involvement in protected areas exist. However, because of the lack of evaluation of whether or not these principles and guidelines have been put into practice, there is hardly any information that indicates the actual involvement of indigenous peoples in protected areas. This paper attempts to compare efforts in partnership between indigenous peoples and protected area authority in three Asian countries: Nepal, Thailand, and China. It shows that the involvement of indigenous peoples is more successful where park planning is participatory and where political and socioeconomic reforms are underway. Indigenous peoples are in conflict with park authorities where park management is centralized and nonparticipatory. Unless concrete efforts are made to address livelihood issues of indigenous peoples living in and around protected areas, park management aimed to protect wildlife will rarely succeed. Participatory park management that involves indigenous peoples and that addresses livelihood issues of indigenous communities will ultimately succeed in its efforts toward wildlife conservation.

Measuring Investment in Learning: Can Electrocardiogram Provide an Indication of Cognitive Effort During Learning?

PubMed

Patterson, Jae T; Hart, Amanda; Hansen, Steve; Carter, Michael J; Ditor, David

2016-04-01

Heart rate variability (i.e., low frequency:high frequency ratio) was measured to differentiate invested cognitive effort during the acquisition and retention of a novel task. Participants (12 male, M = 25.1 year, SD = 3.6; 12 female, M = 22.8 year, SD = 1.1) were required to produce Braille equivalents of English letter primes on a standardized keyboard in proactive or retroactive conditions (groups, each n = 12). The correct Braille response was either provided before (i.e., proactively) or after (i.e., retroactively) the participant's response. During acquisition, participants in the proactive group demonstrated shorter study time, greater recall success, and reported lower cognitive investment. Participants in the proactive and retroactive groups did not statistically differ in heart rate variability. For retention, the retroactive group showed greater recall success, lower perceived cognitive effort investment, and lower heart rate variability. The results highlight the usefulness of heart rate variability in discriminating the cognitive effort invested for a recently acquired skill. © The Author(s) 2016.

Prioritizing multiple therapeutic targets in parallel using automated DNA-encoded library screening

NASA Astrophysics Data System (ADS)

Machutta, Carl A.; Kollmann, Christopher S.; Lind, Kenneth E.; Bai, Xiaopeng; Chan, Pan F.; Huang, Jianzhong; Ballell, Lluis; Belyanskaya, Svetlana; Besra, Gurdyal S.; Barros-Aguirre, David; Bates, Robert H.; Centrella, Paolo A.; Chang, Sandy S.; Chai, Jing; Choudhry, Anthony E.; Coffin, Aaron; Davie, Christopher P.; Deng, Hongfeng; Deng, Jianghe; Ding, Yun; Dodson, Jason W.; Fosbenner, David T.; Gao, Enoch N.; Graham, Taylor L.; Graybill, Todd L.; Ingraham, Karen; Johnson, Walter P.; King, Bryan W.; Kwiatkowski, Christopher R.; Lelièvre, Joël; Li, Yue; Liu, Xiaorong; Lu, Quinn; Lehr, Ruth; Mendoza-Losana, Alfonso; Martin, John; McCloskey, Lynn; McCormick, Patti; O'Keefe, Heather P.; O'Keeffe, Thomas; Pao, Christina; Phelps, Christopher B.; Qi, Hongwei; Rafferty, Keith; Scavello, Genaro S.; Steiginga, Matt S.; Sundersingh, Flora S.; Sweitzer, Sharon M.; Szewczuk, Lawrence M.; Taylor, Amy; Toh, May Fern; Wang, Juan; Wang, Minghui; Wilkins, Devan J.; Xia, Bing; Yao, Gang; Zhang, Jean; Zhou, Jingye; Donahue, Christine P.; Messer, Jeffrey A.; Holmes, David; Arico-Muendel, Christopher C.; Pope, Andrew J.; Gross, Jeffrey W.; Evindar, Ghotas

2017-07-01

The identification and prioritization of chemically tractable therapeutic targets is a significant challenge in the discovery of new medicines. We have developed a novel method that rapidly screens multiple proteins in parallel using DNA-encoded library technology (ELT). Initial efforts were focused on the efficient discovery of antibacterial leads against 119 targets from Acinetobacter baumannii and Staphylococcus aureus. The success of this effort led to the hypothesis that the relative number of ELT binders alone could be used to assess the ligandability of large sets of proteins. This concept was further explored by screening 42 targets from Mycobacterium tuberculosis. Active chemical series for six targets from our initial effort as well as three chemotypes for DHFR from M. tuberculosis are reported. The findings demonstrate that parallel ELT selections can be used to assess ligandability and highlight opportunities for successful lead and tool discovery.

PACS--and beyond. A journey to the digital promised land.

PubMed

Viau, Mark A

2004-01-01

A successful picture archiving and communication system (PACS) integration depends on much more than the technology; marketing also plays a large role. This fact was evident from the inception of the PACS project at Boca Raton Community Hospital (BRCH). Strategic and effective marketing efforts should target technologists, nurses, physicians (including radiologists), administration, and colleagues in other departments. The buy-in of these users is critical to the project's success. BRCH's first marketing effort took place during the initial PACS presentation made to the hospital's board of directors. Once approval was given and a 6-month implementation target was set, a strategic and effective marketing/education plan commenced. Posters, brochures, t-shirts, and promotional items were distributed in a coordinated effort to target hospital staff and referring physician offices. Through its "Got PACS?" branding and other identity materials, BRCH implemented a marketing plan that informed, educated, and engaged PACS users.

Final Scientific/Technical Report for "Enabling Exascale Hardware and Software Design through Scalable System Virtualization"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinda, Peter August

2015-03-17

This report describes the activities, findings, and products of the Northwestern University component of the "Enabling Exascale Hardware and Software Design through Scalable System Virtualization" project. The purpose of this project has been to extend the state of the art of systems software for high-end computing (HEC) platforms, and to use systems software to better enable the evaluation of potential future HEC platforms, for example exascale platforms. Such platforms, and their systems software, have the goal of providing scientific computation at new scales, thus enabling new research in the physical sciences and engineering. Over time, the innovations in systems softwaremore » for such platforms also become applicable to more widely used computing clusters, data centers, and clouds. This was a five-institution project, centered on the Palacios virtual machine monitor (VMM) systems software, a project begun at Northwestern, and originally developed in a previous collaboration between Northwestern University and the University of New Mexico. In this project, Northwestern (including via our subcontract to the University of Pittsburgh) contributed to the continued development of Palacios, along with other team members. We took the leadership role in (1) continued extension of support for emerging Intel and AMD hardware, (2) integration and performance enhancement of overlay networking, (3) connectivity with architectural simulation, (4) binary translation, and (5) support for modern Non-Uniform Memory Access (NUMA) hosts and guests. We also took a supporting role in support for specialized hardware for I/O virtualization, profiling, configurability, and integration with configuration tools. The efforts we led (1-5) were largely successful and executed as expected, with code and papers resulting from them. The project demonstrated the feasibility of a virtualization layer for HEC computing, similar to such layers for cloud or datacenter computing. For effort (3), although a prototype connecting Palacios with the GEM5 architectural simulator was demonstrated, our conclusion was that such a platform was less useful for design space exploration than anticipated due to inherent complexity of the connection between the instruction set architecture level and the microarchitectural level. For effort (4), we found that a code injection approach proved to be more fruitful. The results of our efforts are publicly available in the open source Palacios codebase and published papers, all of which are available from the project web site, v3vee.org. Palacios is currently one of the two codebases (the other being Sandia’s Kitten lightweight kernel) that underlies the node operating system for the DOE Hobbes Project, one of two projects tasked with building a systems software prototype for the national exascale computing effort.« less

Manager Perspectives on Communication and Public Engagement in Ecological Restoration Project Success

EPA Science Inventory

We argue that public engagement is crucial to achieving lasting ecological success in aquatic restoration efforts, and that the most effective public engagement mechanisms are what we term iterative mechanisms. Here we look to a particular social-ecological system – the restorati...

The Role of Affect in Rational (Attributional) Approaches to Human Motivation.

ERIC Educational Resources Information Center

Weiner, Bernard

1980-01-01

Documents characteristics of emotions in relation to action and self-perception. Argues that taking affect into account yields a different interpretation of successful achievement-change programs. Also clarifies the differences between ability and effort as perceived causes of success and failure. (Author/GC)

Marketing: A Key Ingredient for Educational Fundraising Success.

ERIC Educational Resources Information Center

Smith, Laurence N.

1993-01-01

Marketing provides student affairs professionals with some of the most effective strategies, techniques, and actions for success. This chapter, written for professionals without a marketing background, provides a design for the development and implementation of a strategic marketing plan for student affairs educational fundraising efforts.…

National mass care strategy: a national integrated approach.

PubMed

Mintz, Amy; Gonzalez, Waddy

2013-01-01

Mass care refers to a wide range of humanitarian activities that collectively provide life- sustaining services, such as emergency sheltering, feeding, reunification, distribution of emergency supplies and recovery information, before or in the aftermath of an emergency or disaster. Most services are coordinated and provided by non-governmental organisations and/or local government. Based on the lessons learned in the aftermath of Hurricanes Katrina and Rita in 2005, the American Red Cross, the Federal Emergency Management Agency and the National Voluntary Organizations Active in Disasters joined efforts to expand national mass care capabilities in order to support survivors in the wake of catastrophic events, as well as to enhance the integration of volunteers and non-governmental organisations into the broader national effort. These efforts resulted in the creation of the National Mass Care Council in 2010, with representatives of Federal and State agencies, voluntary organisations and the private sector working together to develop a unified approach to mass care and to ensure the provision of consistent and uniform services across the USA, regardless of the magnitude of the event.

Weaving a wide net.

PubMed

Garber, Linda

2002-10-01

SUMMARY Any single approach tostudents' heterosexism and homophobia, however well conceived and executed, is most successful when supported by an integrated campus approach to the problem. Taking as a model the multifaceted efforts at California State University, Fresno-a large public institution located in what can be considered the state's Bible Belt-this essay discusses the strengths and logistics of a campus-wide program to address homophobia and alleviate LGBTQ students' feelings of alienation from the institution and their oppression in society. The efforts of CSUF take place at a number of different levels-classroom, academic department, student services, faculty networking-and can be considered a successful work in progress.

Health technology assessment. Evaluation of biomedical innovative technologies.

PubMed

Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

2010-01-01

This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

The role of medical education in the development of the scientific practice of medicine.

PubMed

Cardinal, Lucien; Kaell, Alan

2017-01-01

The authors describe the important role of medical schools and graduate medical education programs (residencies) in relationship to the advances in Medicine witnessed during the twentieth century; diagnosis, prognosis and treatment were revolutionized. This historical essay details the evolution of the education system and the successful struggle to introduce a uniform, science-based curriculum and bedside education. The result was successive generations of soundly educated physicians prepared with a broad knowledge in science, an understanding of laboratory methods and the ability to practice medicine at the bedside. These changes in medical education created a foundation for the advancement of medicine.

Double-pulse digital speckle pattern interferometry for vibration analysis

NASA Astrophysics Data System (ADS)

Zhang, Dazhi; Xue, Jingfeng; Chen, Lu; Wen, Juying; Wang, Jingjing

2014-12-01

The double-pulse Digital Speckle Pattern Interferometry (DSPI) in the laboratory is established. Two good performances have been achieved at the same time, which is uniform distribution of laser beam energy by space filter and recording two successive pictures by a CCD camera successfully. Then two-dimensional discrete orthogonal wavelet transform method is used for the process of filtering method. By using the DSPI, speckle pattern of a vibrated object is obtained with interval of (2~800)μs, and 3D plot of the transient vibration is achieved. Moreover, good agreements of the mode shapes and displacement are obtained by comparing with Laser Doppler Vibrometer (LDV) .

Assessment of NASA Dual Microstructure Heat Treatment Method for Multiple Forging Batch Heat Treatment

NASA Technical Reports Server (NTRS)

Gayda, John (Technical Monitor); Lemsky, Joe

2004-01-01

NASA dual microstructure heat treatment technology previously demonstrated on single forging heat treat batches of a generic disk shape was successfully demonstrated on a multiple disk batch of a production shape component. A group of four Rolls-Royce Corporation 3rd Stage AE2100 forgings produced from alloy ME209 were successfully dual microstructure heat treated as a single heat treat batch. The forgings responded uniformly as evidenced by part-to-part consistent thermocouple recordings and resultant macrostructures, and from ultrasonic examination. Multiple disk DMHT processing offers a low cost alternative to other published dual microstructure processing techniques.

Problems in the evaluation of day hospitals.

PubMed

Guy, W; Gross, G M

1967-06-01

The day hospital has been utilized as a means both to maintain and improve remission status of previously hospitalized patients and, more recently, as an alternative to inpatient treatment. Although uniformly encouraging, the reports of treatment success are ambiguous and complicated by the recency and diversity of the programs. Proposals to reduce confusion in the areas of identification of population, definition of treatment, treatment effects, and assessment procedures are discussed. The concept of therapeutic community with its emphasis on socialization processes makes symptom reduction alone an insufficient criterion of treatment success. More comprehensive measures of the permanency of remission and quality of social adjustment are advocated.

Constructing Uniformity: the Standardization of International Electromagnetic Measures, 1860-1912

NASA Astrophysics Data System (ADS)

Lagerstrom, Larry Randles

Metrology gained much attention from electrical scientists and practitioners in the nineteenth and early twentieth centuries. Spurred by the expanding telegraph industries, they considered the construction and acceptance of a universal system of electromagnetic measures essential for the growth of science and technology. The task was not easy. Scientists and practitioners, having different concerns and needs, often found themselves at odds. National rivalries further obstructed the attainment of uniform measures. Under the auspices of a series of international electrical congresses and conferences between 1881 and 1908, the systembuilders succeeded in establishing an international system of practical electrical units and standards--the ohm, volt, ampere, coulomb, farad, joule, and watt--based on the centimeter-gram-second (CGS) system of measures. They had less success, however, with practical magnetic units. They had designed the system of electrical units to meet the needs of telegraphy. But the rise of the technologies of electrical power in the late nineteenth century made it difficult to define magnetic units that were both practical for the new technologies and coherent with the existing system of units. The international congress, as an institution, also gave them trouble. It lacked authority and stability and, in some cases, hindered the development of the system of units. More credit for the success of the systembuilders must go, paradoxically, to the national physical laboratories that arose in Germany, France, Great Britain, and the United States circa 1900. They enabled the standardization of international electromagnetic measures by narrowing the community of systembuilders to a small circle of elite experts. This historical process illustrates important aspects of the ways and means of standardization, of the technical and social construction of uniformity.

Red-winged blackbirds (Agelaius phoeniceus) with higher baseline glucocorticoids also invest less in incubation and clutch mass.

PubMed

Schoenle, Laura A; Dudek, Alana M; Moore, Ignacio T; Bonier, Frances

2017-04-01

Glucocorticoid hormones facilitate responses to environmental challenges by mediating diverse physiological and behavioral changes, including resource mobilization and altered reproductive effort. Elevated glucocorticoids might indicate that an individual is facing high levels of environmental challenges and thus, elevated concentrations might be associated with reduced fitness (CORT-fitness hypothesis). Alternatively, the energetic demands of reproduction might be a challenge that requires elevated glucocorticoids to mobilize resources to support reproductive effort, ultimately increasing reproductive investment and fitness (CORT-adaptation hypothesis). Investigations of glucocorticoid-fitness relationships have yielded mixed results. Variation in the direction of this relationship could be caused in part by differences in the contexts in which the relationship was assessed. Incorporating context, such as life history stage, could be key to understanding the role of glucocorticoids in influencing fitness outcomes. We investigated the relationship between corticosterone and reproductive effort and success within a single life history stage: incubation of eggs. In an observational study, we measured baseline corticosterone in incubating female red-winged blackbirds (Agelaius phoeniceus), monitored incubation behavior, and determined hatching success for each nest. Incubating birds with higher baseline corticosterone concentrations had more frequent, shorter incubation bouts and spent less time overall incubating their clutches of eggs than birds with lower corticosterone concentrations. Elevated corticosterone was also associated with lower clutch mass, but neither corticosterone nor incubation effort were correlated with hatching success. Although experimental tests are needed to establish causation, these results suggest that during the incubation period, corticosterone might shift resource investment towards self-maintenance, and away from current reproductive effort. Copyright © 2017 Elsevier Inc. All rights reserved.

Anti-Corrosive Powder Particles

NASA Technical Reports Server (NTRS)

Parker, Donald; MacDowell, Louis, III

2005-01-01

The National Aeronautics and Space Administration (NASA) seeks partners for a new approach in protecting embedded steel surfaces from corrosion. Corrosion of reinforced steel in concrete structures is a significant problem for NASA structures at Kennedy Space Center (KSC) because of the close proximity of the structures to salt spray from the nearby Atlantic Ocean. In an effort to minimize the damage to such structures, coatings were developed that could be applied as liquids to the external surfaces of a substrate in which the metal structures were embedded. The Metallic Pigment Powder Particle technology was developed by NASA at KSC. This technology combines the metallic materials into a uniform particle. The resultant powder can be sprayed simultaneously with a liquid binder onto the surface of concrete structures with a uniform distribution of the metallic pigment for optimum cathodic protection of the underlying steel in the concrete. Metallic Pigment Powder Particle technology improves upon the performance of an earlier NASA technology Liquid Galvanic Coating (U.S. Patent No. 6,627,065).

Effects of protein conformational motions in the native form and non-uniform distribution of electrostatic interaction sites on interfacial water

NASA Astrophysics Data System (ADS)

Pal, Somedatta; Bandyopadhyay, Sanjoy

2013-07-01

Protein-water interactions and their influence on surrounding water is a long-standing problem. Despite its importance, the origin of differential water behavior at the protein surface is still elusive. We have performed molecular simulations of the protein barstar in aqueous medium. Efforts have been made to explore how the conformational motions of the protein segments in the native form and the heterogeneous electrostatic interactions with the polar and charged groups of the protein affect the interfacial water properties. The calculations reveal that reduced dimension of the hydration layer on freezing the protein's degrees of freedom does not modify the heterogeneous water distributions around the protein. However, turning off the protein-water electrostatic contribution leads to non-preferential near-uniform water arrangements at the surface. It is further shown that with protein-water electrostatic interactions turned on, the local structuring of water molecules around the segments are correlated with their degree of exposure to the solvent.

Extended analysis of Skylab experiment M558 data

NASA Technical Reports Server (NTRS)

Ukanwa, A. O.

1976-01-01

A careful review of the data from Skylab M558 was made in an effort to explain the apparent anomaly of the existence of radial concentration gradients whereas none should bave been observed. The very close modelling of the experimental axial concentration profiles by the unsteady-state one-dimensional solution of Fick's Law of self-diffusion in liquid zinc, and the condition of initial uniform concentration in the radioactive pellet portion of the experimental specimens would have precluded the appearance of such radial concentration gradients. Statistical analyses were used to test the significance of the observed deviation from radial-concentration homogeneity. A student t-distribution test of significance showed that, at 90% or even at 80% level of significance, there were no significant deviations from uniformity in radial concentrations. It was also concluded that the two likely causes of any deviation that existed were the zinc to zinc-65 bonding procedure and surface phenomena such as surface tension and capillary action.

Detection of stress corrosion cracking and general corrosion of mild steel in simulated defense nuclear waste solutions using electrochemical noise analysis

NASA Astrophysics Data System (ADS)

Edgemon, G. L.; Danielson, M. J.; Bell, G. E. C.

1997-06-01

Underground waste tanks fabricated from mild steel store more than 253 million liters of high level radioactive waste from 50 years of weapons production at the Hanford Site. The probable modes of corrosion failures are reported as nitrate stress corrosion cracking and pitting. In an effort to develop a waste tank corrosion monitoring system, laboratory tests were conducted to characterize electrochemical noise data for both uniform and localized corrosion of mild steel and other materials in simulated waste environments. The simulated waste solutions were primarily composed of ammonium nitrate or sodium nitrate and were held at approximately 97°C. The electrochemical noise of freely corroding specimens was monitored, recorded and analyzed for periods ranging between 10 and 500 h. At the end of each test period, the specimens were examined to correlate electrochemical noise data with corrosion damage. Data characteristic of uniform corrosion and stress corrosion cracking are presented.

Challenges for Transitioning Science Knowledge to an Operational Environment for Space Weather

NASA Technical Reports Server (NTRS)

Spann, James

2012-01-01

Effectively transitioning science knowledge to an operational environment relevant to space weather is critical to meet the civilian and defense needs, especially considering how technologies are advancing and present evolving susceptibilities to space weather impacts. The effort to transition scientific knowledge to a useful application is not a research task nor is an operational activity, but an effort that bridges the two. Successful transitioning must be an intentional effort that has a clear goal for all parties and measureable outcome and deliverable. This talk will present proven methodologies that have been demonstrated to be effective for terrestrial weather and disaster relief efforts, and how those methodologies can be applied to space weather transition efforts.

Standardized Sample Preparation Using a Drop-on-Demand Printing Platform

DTIC Science & Technology

2013-05-07

successful and robust methodology for energetic sample preparation. Keywords: drop-on-demand; inkjet printing; sample preparation OPEN ACCESS...on a similar length scale. Recently, drop-on-demand inkjet printing technology has emerged as an effective approach to produce test materials to...which most of the material is concentrated along the edges, samples prepared using drop-on-demand inkjet technology demonstrate excellent uniform

A Clinical Evaluation of Cone Beam Computed Tomography

DTIC Science & Technology

2015-06-01

the extent of dental caries . The radiographic image is essential to successfully diagnose pathosis of odontogenic and non-odontogenic origin. The...A CLINICAL EVALUATION OF CONE BEAM COMPUTED TOMOGRAPHY by Thomas Patrick Cairnll, D.D.S. Commander, Dental Corps United States Navy A thesis...submitted to the Faculty of the Endodontics Graduate Program Naval Postgraduate Dental School Uniformed Services University of the Health Sciences in

Analysis of Lean Six Sigma in the Army Contracting Process

DTIC Science & Technology

2011-12-01

Management UAS Unmanned Aircraft Systems UCC Uniform Commercial Code USA/CMO Under Secretary of the Army/Chief Management Officer WMA Warfighter...to when online banking was first introduced. Marketing campaigns were launched across the region, countless hours were expended, and billions of...would not happen without its fair share of challenges. In 2005, GAO added Business Transformation to its list of High Risk topics (Successful

Two-Photon Polymerization of Defects in Photonic Crystals

DTIC Science & Technology

2006-01-01

technique employs two-photon polymerization (TPP) (for description, see Section 2.2) to fabricate high-resolution 3D embedded polymer features within... polymer , and therefore does not influence the polymerization . The image contrast is from the different reflectivities of the interfaces in the system due...Spectroscopy also confirmed for the first time the successful polymerization of a uniform, dense polymer feature throughout the thickness of the

Ecological DYnamics Simulation Model - Light (EDYS-L): User’s Guide Version 4.6.4

DTIC Science & Technology

2011-08-01

dead), utilization potential , and competitive success for each specified species (e.g., insects , rodents, native ungulates, livestock, predators...available disturbances. The default native herbivores are insects , rabbits, and deer. While multiple species occur within each category, and... native herbivores ( insects , rabbits, and deer) is simulated as a uniform consumption rate across the entire landscape. The user has the choice of

Fabrication of transition metal-containing nanostructures via polymer templates for a multitude of applications

NASA Astrophysics Data System (ADS)

Lu, Jennifer Qing

Nanostructures such as carbon nanotubes and semiconducting nanowires offer great technological promise due to their remarkable properties. The lack of a rational synthesis method prevents fabricating these nanostructures with desirable and consistent properties at predefined locations for device applications. In this thesis, employing polymer templates, a variety of highly ordered catalytically active transition metal nanostructures, ranging from single metallic nanoparticles of Fe, Co, Ni, Au and bimetallic nanoparticles of Ni/Fe and Co/Mo to Fe-rich silicon oxide nanodomains with uniform and tunable size and spacing have been successfully synthesized. These nanostructures have been demonstrated to be excellent catalyst systems for the synthesis of carbon nanotube and silicon nanowire. High quality, small diameter carbon nanotubes and nanowires with narrow size distribution have been successfully attained. Because these catalytically active nanostructures are uniformly distributed and do not agglomerate at the growth temperatures, uniform, high density and high quality carbon nanotube mats have been obtained. Since this polymer template approach is fully compatible with conventional top-down photolithography, lithographically selective growth of carbon nanotubes on a surface or suspended carbon nanotubes across trenches have been produced by using existing semiconductor processing. We have also shown the feasibility of producing carbon nanotubes and silicon nanowires at predefined locations on a wafer format and established a wafer-level carbon nanotube based device fabrication process. The ability of the polymer template approach to control catalyst systems at the nano-, micro- and macro-scales paves a pathway for commercialization of these 1D nanostructure-enabled devices. Beside producing well-defined, highly ordered discrete catalytically active metal-containing nanostructures by the polymer template approach, Au and Ag nanotextured surfaces have also been attained by using a self-assembled ferrocenylsilane-based inorganic block copolymer template. These Au and Ag nanotextured surfaces exhibit different surface plasmon behavior than the nanotextured surface. Greatly enhanced and uniform Raman scattering have been observed on Ag nanotextured surfaces. Highly sensitive Au nanotextured surfaces suggest their potential application as sensing surfaces for SPR-based biodetection. This simple fabrication technique of producing inorganic nanostructures with adjustable properties such as size, spacing and composition offers great promise for both fundamental research and technological development.

Chief of Residents for Quality Improvement and Patient Safety: A Recipe for a New Role in Graduate Medical Education.

PubMed

Ferraro, Kelly; Zernzach, Randall; Maturo, Stephen; Nagy, Christopher; Barrett, Rebecca

2017-03-01

The San Antonio Uniformed Services Health Education Consortium (SAUSHEC) is the largest group of residency programs in the Department of Defense. In an effort to provide improved Quality Improvement and Patient Safety (QI/PS) training for its residents, SAUSHEC created the position of Chief of QI/PS for Residents in the academic year 2014-2015. The Chief of QI/PS for Residents was based in the Internal Medicine residency program but also assisted with SAUSHEC-wide QI/PS projects. This is the first such job in the Department of Defense. Here, we detail the accomplishments during this first academic year, including the alignment of the job with the stated QI/PS-related goals of the Accreditation Council for Graduate Medical Education Clinical Learning Environment Review. Efforts focused within the Internal Medicine residency program included QI/PS curriculum development, improvement upon monthly morbidity and mortality (M&M) conferences, and facilitating resident participation in QI projects. The 2014-2015 academic year Internal Medicine residency QI/PS project focused on increasing comfort and discussions with patients regarding advance directives; this also served to emphasize the humanistic side of potential QI/PS projects. The Chief of QI/PS for Residents also spearheaded hospital-wide initiatives, including the creation of a quarterly hospital-wide M&M conference, coordinating resident involvement in QI/PS-related committees, and facilitating feedback of patient safety report responses to trainees. We focus on the portion of the QI/PS curriculum involving the presentation of a mock Root Cause Analysis (RCA) and provide the results of a pre- and postpresentation survey of resident knowledge of RCAs. In order to quantify the efforts over the entire academic year, we also report the results of a resident self-assessment of QI/PS aptitude and competencies, including changes in these measures over the academic year. Finally, we discuss challenges faced and outline future goals for the position. The SAUSHEC Chief of QI/PS for Residents is the first such designated position in the Department of Defense. As QI/PS continues to increase as a focus area for physician training, we anticipate that other programs will create similar positions. We provide ideas for how a Chief of QI/PS for Residents can be involved at a program and hospital-wide level and quantify the success of different efforts. Reprint & Copyright © 2017 Association of Military Surgeons of the U.S.

Quality Culture: NMC Ends Report, August 1995.

ERIC Educational Resources Information Center

Merrill, Sherrey; And Others

In an effort to determine success in establishing an internal culture consistent with the principles of total quality management, Northwestern Michigan College (NMC) conducted a study of faculty and staff attitudes and involvement in the college. The study focused on five measurements: improvement on NMC indicators of success, quality training and…

Smoothing the Path to Learning Success: A Student Perspective

ERIC Educational Resources Information Center

Doucette, Colleen

2005-01-01

The education system invests time and resources in collaborative processes designed to improve its ability to support students as successful learners. Traditionally, it seeks the advice of educators, researchers, ministries and boards of education, parents, and the public at large in an ongoing effort to increase its effectiveness. Less…

Successful Concurrent Programs: An EXCELerate Program in Oklahoma

ERIC Educational Resources Information Center

Vargas, Juanita Gamez; Roach, Rick; David, Kevin M.

2014-01-01

The article presents the implementation and findings of a successful collaborative effort with the Oklahoma State Regents for Higher Education (OSRHE), Tulsa Community College (TCC), and two local public school districts, Tulsa Public Schools (TPS) and Union Public Schools (UPS). Known as EXCELerate, it's a five-semester dual enrollment pilot…

Success Is in the Details: Publishing To Validate Elementary Authors.

ERIC Educational Resources Information Center

Chihak, Judy

1999-01-01

Describes Panther Paw Press, a school-based publishing program that is built on the efforts of teachers, parents, students, and a succession of supportive school principals. Discusses the details that make this publishing program work framed in the six goals articulated in the Panther Paw Press Handbook. (SR)

Emergence and early survival of early versus late seral species in Great Basin restoration in two different soil types

USDA-ARS?s Scientific Manuscript database

Use of early seral species in Great Basin rangeland reseedings efforts may increase invasion resistance, facilitate succession, and improve restoration/rehabilitation success. Because they occupy a similar ecological niche, theory predicts early seral species would compete more strongly against exot...

From a Parent's Perspective: Hints for Morning Success.

ERIC Educational Resources Information Center

Duffy, Roslyn

1996-01-01

Recommends the development of a routine to transform the morning getting-ready battleground into a congenial team effort. Offers hints for a successful routine, including expecting everyone to be dressed before breakfast; considering having no TV; eliminating most morning decision-making; involving everyone; and not using rewards with routines.…

Clicking Your Way to Student Success!

ERIC Educational Resources Information Center

Bostwick, Dianna; Foster, John; Bloomfield, Amie; Rutledge, Paul

2013-01-01

According to the authors, their field has been in a constant state of change and evolution, from manual arts to vocational education to career and technical education (CTE). In a recent effort to increase academic and occupational achievement and success for all CTE students through targeted improvement plans, the state of Pennsylvania implemented…

Effects of Attractiveness and Gender on the Perception of Achievement-Related Variables.

ERIC Educational Resources Information Center

Chia, R. C.; Allred, L. J.; Grossnickle, W. F.; Lee, G. W.

1998-01-01

Examines the effects of physical attractiveness and gender on perceptions of academic success, achievement-related traits, intelligence, initiative, and attributions of ability and effort in relation to academic success. Finds that being perceived as physically attractive created positive impressions of achievement-related traits for men but…

Inside Successful District-Charter Compacts

ERIC Educational Resources Information Center

Whitmire, Richard

2014-01-01

This article describes the efforts of a school superintendent to bring the best of charter school practices together with public school education in order to begin a program of collaboration and professional development for teachers, as well as a way to measure student success. The superintendent visited YES Prep and KIPP (Knowledge Is Power…

Plant succession and approaches to community restoration

Treesearch

Bruce A. Roundy

2005-01-01

The processes of vegetation change over time, or plant succession, are also the processes involved in plant community restoration. Restoration efforts attempt to use designed disturbance, seedbed preparation and sowing methods, and selection of adapted and compatible native plant materials to enhance ecological function. The large scale of wildfires and weed invasion...

Sharing Success in the Southeast: Promising Service-Learning Programs.

ERIC Educational Resources Information Center

Watkins, James; Wilkes, Dianne

The SouthEastern Regional Vision for Education (SERVE) Sharing Success program recognizes exemplary public school efforts and practices in the southeastern United States for the purpose of increasing the awareness and use of exemplary educational programs. This document highlights more than 30 elementary- and/or secondary-level programs that have…

The Atacama Large Millimeter/Submillimeter Array (ALMA) - A Successful Three-Way International Partnership Without a Majority Stakeholder

NASA Astrophysics Data System (ADS)

Vanden Bout, Paul A.

2013-04-01

The Atacama Millimeter/Submillimeter Array (ALMA) is the largest ground-based astronomical facility built to date. It's size and challenging site required an international effort. This talk presents the partnership structure, management challenges, current status, and examples of early scientific successes.

Effectiveness of Pearson's SuccessMaker Mathematics for Students with Disabilities

ERIC Educational Resources Information Center

McKissick, Steven K.

2017-01-01

SuccessMaker mathematics is an instructional learning system rooted in behaviorist instructional theory. Previous research efforts have left much to be desired and have produced inconsistent results. Recent research for this program appears to be tapering off, despite advances in technology signaling integration of concepts from other theoretical…

Lessons for Implementation from the World's Most Successful Programme: The Global Eradication of Smallpox.

ERIC Educational Resources Information Center

Pratt, David

1999-01-01

Focuses on lessons educators might learn from the Intensified Campaign for the Global Eradication of Smallpox. Outlines the history of smallpox eradication. Discusses the eradication effort's obstacles, campaign, and costs and benefits. Considers five factors relevant to the successful implementation of educational programs. (CMK)

An Examination of the Flipped Classroom Approach on College Student Academic Involvement

ERIC Educational Resources Information Center

McCallum, Shelly; Schultz, Janel; Sellke, Kristen; Spartz, Jason

2015-01-01

Colleges and universities remain attentive to developing and supporting ways to foster student academic success. These efforts have taken on more importance as student success, commonly measured by student learning achievement, has failed to meet expectations. For colleges and universities, the flipped classroom represents a student-centered…

Developing a Successful Asynchronous Online Extension Program for Forest Landowners

ERIC Educational Resources Information Center

Zobrist, Kevin W.

2014-01-01

Asynchronous online Extension classes can reach a wide audience, is convenient for the learner, and minimizes ongoing demands on instructor time. However, producing such classes takes significant effort up front. Advance planning and good communication with contributors are essential to success. Considerations include delivery platforms, content…

Engaging a Systemic Partnership to Increase College Access and Success

ERIC Educational Resources Information Center

Benson, Gwen; McClendon, Susan Crim

2008-01-01

Systemic, university-school-community partnerships characterize efforts by Georgia State University to enhance preparation of urban teachers and urban student success. A partnership with the Atlanta Housing Authority focuses on family education in mixed-income communities. Work with the National Parks Service's Martin Luther King, Jr., Center…

Essentials for Successful Organization Development Efforts.

ERIC Educational Resources Information Center

Boss, R. Wayne

1979-01-01

The purpose of organization development (OD) is to improve an organization's effectiveness in making decisions and changes and to reach the full potential of its personnel. Objectives of OD and essentials for successful programs are listed. Definitions of essentials and how they add to the effectiveness of OD are presented. (Author/BEF)