32 CFR 1800.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...

32 CFR 1800.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... accredited United States educational institution at any academic level or institution engaged in research... description of a document (record) by unique identification number or descriptive terms which permit a NACIC...

40 CFR 63.2182 - What records must I keep?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast Notification, Reports, and...) Fermentation stage for which you are using the fermenter. (3) Unique CEMS equipment identification number. ...

Clinically Detectable Dental Identifiers Observed in Intra-oral Photographs and Extra-oral Radiographs, Validated for Human Identification Purposes.

PubMed

Angelakopoulos, Nikolaos; Franco, Ademir; Willems, Guy; Fieuws, Steffen; Thevissen, Patrick

2017-07-01

Screening the prevalence and pattern of dental identifiers contributes toward the process of human identification. This research investigated the uniqueness of clinical dental identifiers in photographs and radiographs. Panoramic and lateral cephalometric radiographs and five intra-oral photographs of 1727 subjects were used. In a target set, two observers examined different subjects. In a subset, both observers examined the same subjects (source set). The distance between source and target subjects was quantified for each identifier. The percentage of subjects in the target set being at least as close as the correct subject was assessed. The number of molars (34.6%), missing teeth (42%), and displaced teeth (59.9%) were the most unique identifiers in photographs and panoramic and lateral cephalometric radiographs, respectively. The pattern of rotated teeth (14.9%) was the most unique in photographs, while displaced teeth was in panoramic (37.6%) and lateral cephalometric (54.8%) radiographs. Morphological identifiers were the most unique, highlighting their importance for human identifications. © 2016 American Academy of Forensic Sciences.

Biometric template revocation

NASA Astrophysics Data System (ADS)

Arndt, Craig M.

2004-08-01

Biometric are a powerful technology for identifying humans both locally and at a distance. In order to perform identification or verification biometric systems capture an image of some biometric of a user or subject. The image is then converted mathematical to representation of the person call a template. Since we know that every human in the world is different each human will have different biometric images (different fingerprints, or faces, etc.). This is what makes biometrics useful for identification. However unlike a credit card number or a password to can be given to a person and later revoked if it is compromised and biometric is with the person for life. The problem then is to develop biometric templates witch can be easily revoked and reissued which are also unique to the user and can be easily used for identification and verification. In this paper we develop and present a method to generate a set of templates which are fully unique to the individual and also revocable. By using bases set compression algorithms in an n-dimensional orthogonal space we can represent a give biometric image in an infinite number of equally valued and unique ways. The verification and biometric matching system would be presented with a given template and revocation code. The code will then representing where in the sequence of n-dimensional vectors to start the recognition.

9 CFR 77.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of each animal to be moved; the number, breed, sex, and approximate age of the animals covered by the... official eartag or by means of an individual tattoo or hot brand that provides unique identification for...

9 CFR 77.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of each animal to be moved; the number, breed, sex, and approximate age of the animals covered by the... official eartag or by means of an individual tattoo or hot brand that provides unique identification for...

Traceability in stem cell research: from participant sample to induced pluripotent stem cell and back.

PubMed

Morrison, Michael; Moraia, Linda Briceño; Steele, Jane C

2016-01-01

This paper describes a traceability system developed for the Stem cells for Biological Assays of Novel drugs and prediCtive toxiCology consortium. The system combines records and labels that to biological material across geographical locations and scientific processes from sample donation to induced pluripotent stem cell line. The labeling system uses a unique identification number to link every aliquot of sample at every stage of the reprogramming pathway back to the original donor. Only staff at the clinical recruitment site can reconnect the unique identification number to the identifying details of a specific donor. This ensures the system meets ethical and legal requirements for protecting privacy while allowing full traceability of biological material. The system can be adapted to other projects and for use with different primary sample types.

16 CFR 603.1 - Terms defined in the Fair Credit Reporting Act.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., employer or taxpayer identification number; (2) Unique biometric data, such as fingerprint, voice print... person filing the report to criminal penalties relating to the filing of false information, if, in fact...

47 CFR 64.1504 - Restrictions on the use of toll-free numbers.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., debit, prepaid account, phone bill, or credit or calling card and, if a subscriber elects to pay by means of phone bill, a clear explanation that the subscriber will be assessed for calls made to the information service from the subscriber's phone line; (vii) A unique personal identification number or other...

19 CFR 123.91 - Electronic information for rail cargo required in advance of arrival.

Code of Federal Regulations, 2010 CFR

2010-04-01

... transportation and exportation, in another vehicle or conveyance is also subject to the advance electronic... identification number will be a unique number to be assigned by CBP upon the implementation of the Automated... implementation of the Automated Commercial Environment); (8) The place where the rail carrier takes possession of...

Identifying and Mitigating Risks in Security Sector Assistance for Africa’s Fragile States

DTIC Science & Technology

2015-01-01

The Logframe Handbook: A Logical Framework Approach to Project Cycle Management , Washington, D.C., 2005. 34 Identifying and Mitigating Risks in SSA...Fragile States 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER... Project Unique Identification Code (PUIC) for the project that produced this document is HQD126409. v Contents Preface

16 CFR 603.1 - Terms defined in the Fair Credit Reporting Act.

Code of Federal Regulations, 2011 CFR

2011-01-01

... taxpayer identification number; (2) Unique biometric data, such as fingerprint, voice print, retina or iris... report to criminal penalties relating to the filing of false information, if, in fact, the information in...

21 CFR 830.320 - Submission of unique device identification information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Identification Database § 830.320 Submission of unique device identification information. (a) Designation of... Unique Device Identification Database (GUDID) in a format that we can process, review, and archive...

Analyzing Contingency Contracting Purchases for Operation Iraqi Freedom (Unrestricted Version)

DTIC Science & Technology

2008-01-01

that could inform such strategic purchasing decisions. 14 We used the unique contract identification number to check for cross -organization...beds, mattresses, dressers , footlockers) Other (stools, rugs, seats, cabinets, tables, folding chairs, paintings) Generators Various power generators

A catalogue of chromospherically active binary stars (third edition)

NASA Astrophysics Data System (ADS)

Eker, Z.; Ak, N. Filiz; Bilir, S.; Doǧru, D.; Tüysüz, M.; Soydugan, E.; Bakış, H.; Uǧraş, B.; Soydugan, F.; Erdem, A.; Demircan, O.

2008-10-01

The catalogue of chromospherically active binaries (CABs) has been revised and updated. With 203 new identifications, the number of CAB stars is increased to 409. The catalogue is available in electronic format where each system has a number of lines (suborders) with a unique order number. The columns contain data of limited numbers of selected cross references, comments to explain peculiarities and the position of the binarity in case it belongs to a multiple system, classical identifications (RS Canum Venaticorum, BY Draconis), brightness and colours, photometric and spectroscopic data, a description of emission features (CaII H and K, Hα, ultraviolet, infrared), X-ray luminosity, radio flux, physical quantities and orbital information, where each basic entry is referenced so users can go to the original sources.

VizieR Online Data Catalog: Chromospherically Active Binaries. Third version (Eker+, 2008)

NASA Astrophysics Data System (ADS)

Eker, Z.; Filiz-Ak, N.; Bilir, S.; Dogru, D.; Tuysuz, M.; Soydugan, E.; Bakis, H.; Ugras, B.; Soydugan, F.; Erdem, A.; Demircan, O.

2008-06-01

Chromospherically Active Binaries (CAB) catalogue have been revised and updated. With 203 new identifications, the number of CAB stars is increased to 409. Catalogue is available in electronic format where each system has various number of lines (sub-orders) with a unique order number. Columns contain data of limited number of selected cross references, comments to explain peculiarities and position of the binarity in case it belongs to a multiple system, classical identifications (RS CVn, BY Dra), brightness and colours, photometric and spectroscopic data, description of emission features (Ca II H&K, Hα, UV, IR), X-Ray luminosity, radio flux, physical quantities and orbital information, where each basic entry are referenced so users can go original sources. (10 data files).

21 CFR 830.350 - Correction of information submitted to the Global Unique Device Identification Database.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Unique Device Identification Database. 830.350 Section 830.350 Food and Drugs FOOD AND DRUG... Global Unique Device Identification Database § 830.350 Correction of information submitted to the Global Unique Device Identification Database. (a) If FDA becomes aware that any information submitted to the...

Optimization of mass spectrometric parameters improve the identification performance of capillary zone electrophoresis for single-shot bottom-up proteomics analysis.

PubMed

Zhang, Zhenbin; Dovichi, Norman J

2018-02-25

The effects of MS1 injection time, MS2 injection time, dynamic exclusion time, intensity threshold, and isolation width were investigated on the numbers of peptide and protein identifications for single-shot bottom-up proteomics analysis using CZE-MS/MS analysis of a Xenopus laevis tryptic digest. An electrokinetically pumped nanospray interface was used to couple a linear-polyacrylamide coated capillary to a Q Exactive HF mass spectrometer. A sensitive method that used a 1.4 Th isolation width, 60,000 MS2 resolution, 110 ms MS2 injection time, and a top 7 fragmentation produced the largest number of identifications when the CZE loading amount was less than 100 ng. A programmable autogain control method (pAGC) that used a 1.4 Th isolation width, 15,000 MS2 resolution, 110 ms MS2 injection time, and top 10 fragmentation produced the largest number of identifications for CZE loading amounts greater than 100 ng; 7218 unique peptides and 1653 protein groups were identified from 200 ng by using the pAGC method. The effect of mass spectrometer conditions on the performance of UPLC-MS/MS was also investigated. A fast method that used a 1.4 Th isolation width, 30,000 MS2 resolution, 45 ms MS2 injection time, and top 12 fragmentation produced the largest number of identifications for 200 ng UPLC loading amount (6025 unique peptides and 1501 protein groups). This is the first report where the identification number for CZE surpasses that of the UPLC at the 200 ng loading level. However, more peptides (11476) and protein groups (2378) were identified by using UPLC-MS/MS when the sample loading amount was increased to 2 μg with the fast method. To exploit the fast scan speed of the Q-Exactive HF mass spectrometer, higher sample loading amounts are required for single-shot bottom-up proteomics analysis using CZE-MS/MS. Copyright © 2017 Elsevier B.V. All rights reserved.

Unique identification code for medical fundus images using blood vessel pattern for tele-ophthalmology applications.

PubMed

Singh, Anushikha; Dutta, Malay Kishore; Sharma, Dilip Kumar

2016-10-01

Identification of fundus images during transmission and storage in database for tele-ophthalmology applications is an important issue in modern era. The proposed work presents a novel accurate method for generation of unique identification code for identification of fundus images for tele-ophthalmology applications and storage in databases. Unlike existing methods of steganography and watermarking, this method does not tamper the medical image as nothing is embedded in this approach and there is no loss of medical information. Strategic combination of unique blood vessel pattern and patient ID is considered for generation of unique identification code for the digital fundus images. Segmented blood vessel pattern near the optic disc is strategically combined with patient ID for generation of a unique identification code for the image. The proposed method of medical image identification is tested on the publically available DRIVE and MESSIDOR database of fundus image and results are encouraging. Experimental results indicate the uniqueness of identification code and lossless recovery of patient identity from unique identification code for integrity verification of fundus images. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

49 CFR 565.16 - Reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... NHTSA. (b) Manufacturers of vehicles subject to this part shall submit, either directly or through an agent, the unique identifier for each make and type of vehicle it manufactures at least 60 days before...

49 CFR 565.16 - Reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... NHTSA. (b) Manufacturers of vehicles subject to this part shall submit, either directly or through an agent, the unique identifier for each make and type of vehicle it manufactures at least 60 days before...

49 CFR 565.16 - Reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... NHTSA. (b) Manufacturers of vehicles subject to this part shall submit, either directly or through an agent, the unique identifier for each make and type of vehicle it manufactures at least 60 days before...

49 CFR 565.16 - Reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... NHTSA. (b) Manufacturers of vehicles subject to this part shall submit, either directly or through an agent, the unique identifier for each make and type of vehicle it manufactures at least 60 days before...

49 CFR 565.16 - Reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... NHTSA. (b) Manufacturers of vehicles subject to this part shall submit, either directly or through an agent, the unique identifier for each make and type of vehicle it manufactures at least 60 days before...

40 CFR 1042.135 - Labeling.

Code of Federal Regulations, 2014 CFR

2014-07-01

... fixed-pitch propellers, etc.). If the engine is certified as a recreational engine, state: “INSTALLING... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.135 Labeling. (a) Assign each engine a unique identification number and permanently affix...

40 CFR 1042.135 - Labeling.

Code of Federal Regulations, 2012 CFR

2012-07-01

... fixed-pitch propellers, etc.). If the engine is certified as a recreational engine, state: “INSTALLING... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.135 Labeling. (a) Assign each engine a unique identification number and permanently affix...

40 CFR 1042.135 - Labeling.

Code of Federal Regulations, 2013 CFR

2013-07-01

... fixed-pitch propellers, etc.). If the engine is certified as a recreational engine, state: “INSTALLING... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.135 Labeling. (a) Assign each engine a unique identification number and permanently affix...

21 CFR 830.310 - Information required for unique device identification.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Information required for unique device identification. 830.310 Section 830.310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND... Identification Database § 830.310 Information required for unique device identification. The contact for device...

A proposed architecture and method of operation for improving the protection of privacy and confidentiality in disease registers

PubMed Central

Churches, Tim

2003-01-01

Background Disease registers aim to collect information about all instances of a disease or condition in a defined population of individuals. Traditionally methods of operating disease registers have required that notifications of cases be identified by unique identifiers such as social security number or national identification number, or by ensembles of non-unique identifying data items, such as name, sex and date of birth. However, growing concern over the privacy and confidentiality aspects of disease registers may hinder their future operation. Technical solutions to these legitimate concerns are needed. Discussion An alternative method of operation is proposed which involves splitting the personal identifiers from the medical details at the source of notification, and separately encrypting each part using asymmetrical (public key) cryptographic methods. The identifying information is sent to a single Population Register, and the medical details to the relevant disease register. The Population Register uses probabilistic record linkage to assign a unique personal identification (UPI) number to each person notified to it, although not necessarily everyone in the entire population. This UPI is shared only with a single trusted third party whose sole function is to translate between this UPI and separate series of personal identification numbers which are specific to each disease register. Summary The system proposed would significantly improve the protection of privacy and confidentiality, while still allowing the efficient linkage of records between disease registers, under the control and supervision of the trusted third party and independent ethics committees. The proposed architecture could accommodate genetic databases and tissue banks as well as a wide range of other health and social data collections. It is important that proposals such as this are subject to widespread scrutiny by information security experts, researchers and interested members of the general public, alike. PMID:12515580

21 CFR 830.330 - Times for submission of unique device identification information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Times for submission of unique device identification information. 830.330 Section 830.330 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... Identification Database § 830.330 Times for submission of unique device identification information. (a) The...

46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Inner Envelope Fabric; (iv) Closure (including zippers) or Adjustment Hardware; (v) Body Strap; (vi... in detail and including the unique style, part, or model number, the identification data required by the applicable subpart of this part, and any other manufacturer's identifying data. No two components...

46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Inner Envelope Fabric; (iv) Closure (including zippers) or Adjustment Hardware; (v) Body Strap; (vi... in detail and including the unique style, part, or model number, the identification data required by the applicable subpart of this part, and any other manufacturer's identifying data. No two components...

46 CFR 164.019-7 - Non-standard components; acceptance criteria and procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Inner Envelope Fabric; (iv) Closure (including zippers) or Adjustment Hardware; (v) Body Strap; (vi... in detail and including the unique style, part, or model number, the identification data required by the applicable subpart of this part, and any other manufacturer's identifying data. No two components...

40 CFR 1042.135 - Labeling.

Code of Federal Regulations, 2010 CFR

2010-07-01

... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.135 Labeling. (a) Assign each engine a unique identification number and permanently affix, engrave, or stamp it on the engine in a legible way. (b) At the time of manufacture, affix a permanent and...

Supplementary search methods were more effective and offered better value than bibliographic database searching: A case study from public health and environmental enhancement.

PubMed

Cooper, Chris; Lovell, Rebecca; Husk, Kerryn; Booth, Andrew; Garside, Ruth

2018-06-01

We undertook a systematic review to evaluate the health benefits of environmental enhancement and conservation activities. We were concerned that a conventional process of study identification, focusing on exhaustive searches of bibliographic databases as the primary search method, would be ineffective, offering limited value. The focus of this study is comparing study identification methods. We compare (1) an approach led by searches of bibliographic databases with (2) an approach led by supplementary search methods. We retrospectively assessed the effectiveness and value of both approaches. Effectiveness was determined by comparing (1) the total number of studies identified and screened and (2) the number of includable studies uniquely identified by each approach. Value was determined by comparing included study quality and by using qualitative sensitivity analysis to explore the contribution of studies to the synthesis. The bibliographic databases approach identified 21 409 studies to screen and 2 included qualitative studies were uniquely identified. Study quality was moderate, and contribution to the synthesis was minimal. The supplementary search approach identified 453 studies to screen and 9 included studies were uniquely identified. Four quantitative studies were poor quality but made a substantive contribution to the synthesis; 5 studies were qualitative: 3 studies were good quality, one was moderate quality, and 1 study was excluded from the synthesis due to poor quality. All 4 included qualitative studies made significant contributions to the synthesis. This case study found value in aligning primary methods of study identification to maximise location of relevant evidence. Copyright © 2017 John Wiley & Sons, Ltd.

Lithographic chip identification: meeting the failure analysis challenge

NASA Astrophysics Data System (ADS)

Perkins, Lynn; Riddell, Kevin G.; Flack, Warren W.

1992-06-01

This paper describes a novel method using stepper photolithography to uniquely identify individual chips for permanent traceability. A commercially available 1X stepper is used to mark chips with an identifier or `serial number' which can be encoded with relevant information for the integrated circuit manufacturer. The permanent identification of individual chips can improve current methods of quality control, failure analysis, and inventory control. The need for this technology is escalating as manufacturers seek to provide six sigma quality control for their products and trace fabrication problems to their source. This need is especially acute for parts that fail after packaging and are returned to the manufacturer for analysis. Using this novel approach, failure analysis data can be tied back to a particular batch, wafer, or even a position within a wafer. Process control can be enhanced by identifying the root cause of chip failures. Chip identification also addresses manufacturers concerns with increasing incidences of chip theft. Since chips currently carry no identification other than the manufacturer's name and part number, recovery efforts are hampered by the inability to determine the sales history of a specific packaged chip. A definitive identifier or serial number for each chip would address this concern. The results of chip identification (patent pending) are easily viewed through a low power microscope. Batch number, wafer number, exposure step, and chip location within the exposure step can be recorded, as can dates and other items of interest. An explanation of the chip identification procedure and processing requirements are described. Experimental testing and results are presented, and potential applications are discussed.

78 FR 58545 - Global Unique Device Identification Database; Draft Guidance for Industry; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

...] Global Unique Device Identification Database; Draft Guidance for Industry; Availability AGENCY: Food and... the availability of the draft guidance entitled ``Global Unique Device Identification Database (GUDID... manufacturer) will interface with the GUDID, as well as information on the database elements that must be...

Applications for unique identifiers in the geological sciences

NASA Astrophysics Data System (ADS)

Klump, J.; Lehnert, K. A.

2012-12-01

Even though geology has always been a generalist discipline in many parts, approaches towards questions about Earth's past have become increasingly interdisciplinary. At the same time, a wealth of samples has been collected, the resulting data have been stored in in disciplinary databases, the interpretations published in scientific literature. In the past these resources have existed alongside each other, semantically linked only by the knowledge of the researcher and his peers. One of the main drivers towards the inception of the world wide web was the ability to link scientific sources over the internet. The Uniform Resource Locator (URL) used to locate resources on the web soon turned out to be ephemeral in nature. A more reliable way of addressing objects was needed, a way of persistent identification to make digital objects, or digital representations of objects, part of the record of science. With their high degree of centralisation the scientific publishing houses were quick to implement and adopt a system for unique and persistent identification, the Digital Object Identifier (DOI) ®. At the same time other identifier systems exist alongside DOI, e.g. URN, ARK, handle ®, and others. There many uses for persistent identification in science, other than the identification of journal articles. DOI are already used for the identification of data, thus making data citable. There are several initiatives to assign identifiers to authors and institutions to allow unique identification. A recent development is the application of persistent identifiers for geological samples. As most data in the geosciences are derived from samples, it is crucial to be able to uniquely identify the samples from which a set of data were derived. Incomplete documentation of samples in publications, use of ambiguous sample names are major obstacles for synthesis studies and re-use of data. Access to samples for re-analysis and re-appraisal is limited due to the lack of a central catalogue that allows finding a sample's archiving location. The International Geo Sample Number (IGSN) provides solutions to the questions of unique sample identification and discovery. Use of the IGSN in digital data systems allows building linkages between the digital representation of samples in sample registries, e.g. SESAR, and their related data in the literature and in web accessible digital data repositories. Persistent identifiers are now available for literature, data, samples, and authors. More applications, e.g. identification of methods or instruments, will follow. In conjunction with semantic web technology the application of unique and persistent identifiers in the geosciences will aid discovery both through systematic data mining, exploratory data analysis, and serendipity effects. This talk will discuss existing and emerging applications for persistent identifiers in the geological sciences.

Particular Biochemical Profiles for Enterohemorrhagic Escherichia coli O157:H7 Isolates on the ID 32E System

PubMed Central

Leclercq, Alexandre; Lambert, Bernard; Pierard, Denis; Mahillon, Jacques

2001-01-01

The ability of the ID 32E system to identify and discriminate 74 Escherichia coli O157 isolates among 106 E. coli non-O157 isolates was evaluated. The results showed atypical biochemical reactions but accurate identification at the species level and no unique biochemical profile numbers for E. coli O157, although these numbers were distinct from those of other serotypes. PMID:11230449

50 CFR 216.22 - Taking by State or local government officials.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Identification and curation. The Regional Director will assign a single unique number to each carcass, and the... person if: (i) The person transferring the marine mammal specimen does not receive remuneration for the... person within the United States unless the Regional Director of the appropriate Regional Office of the...

49 CFR 180.416 - Discharge system inspection and maintenance program for cargo tanks transporting liquefied...

Code of Federal Regulations, 2010 CFR

2010-10-01

... with a unique identification number and maximum working pressure. (c) Post-delivery hose check. After... during the unloading. (d) Monthly inspections and tests. (1) The operator must visually inspect each... operator must actuate all emergency discharge control devices designed to close the internal self-closing...

49 CFR 180.416 - Discharge system inspection and maintenance program for cargo tanks transporting liquefied...

Code of Federal Regulations, 2011 CFR

2011-10-01

... unique identification number and maximum working pressure. (c) Post-delivery hose check. After each... unloading. (d) Monthly inspections and tests. (1) The operator must visually inspect each delivery hose... actuate all emergency discharge control devices designed to close the internal self-closing stop valve to...

49 CFR 180.416 - Discharge system inspection and maintenance program for cargo tanks transporting liquefied...

Code of Federal Regulations, 2014 CFR

2014-10-01

... unique identification number and maximum working pressure. (c) Post-delivery hose check. After each... unloading. (d) Monthly inspections and tests. (1) The operator must visually inspect each delivery hose... actuate all emergency discharge control devices designed to close the internal self-closing stop valve to...

49 CFR 180.416 - Discharge system inspection and maintenance program for cargo tanks transporting liquefied...

Code of Federal Regulations, 2013 CFR

2013-10-01

... unique identification number and maximum working pressure. (c) Post-delivery hose check. After each... unloading. (d) Monthly inspections and tests. (1) The operator must visually inspect each delivery hose... actuate all emergency discharge control devices designed to close the internal self-closing stop valve to...

49 CFR 180.416 - Discharge system inspection and maintenance program for cargo tanks transporting liquefied...

Code of Federal Regulations, 2012 CFR

2012-10-01

... unique identification number and maximum working pressure. (c) Post-delivery hose check. After each... unloading. (d) Monthly inspections and tests. (1) The operator must visually inspect each delivery hose... actuate all emergency discharge control devices designed to close the internal self-closing stop valve to...

Problems of Dual-Career Black Couples: Identification and Implications for Family Interventions.

ERIC Educational Resources Information Center

Thomas, Veronica G.

1990-01-01

Examined problems of 41 dual-career Black couples. Findings indicated that dual-career Black couples experienced a number of problems related to their lifestyle. Found unique problems perceived by dual-career Black families. In addition to problems experienced by White dual-career couples, Blacks also faced racial discrimination, social isolation,…

RECOVIR Software for Identifying Viruses

NASA Technical Reports Server (NTRS)

Chakravarty, Sugoto; Fox, George E.; Zhu, Dianhui

2013-01-01

Most single-stranded RNA (ssRNA) viruses mutate rapidly to generate a large number of strains with highly divergent capsid sequences. Determining the capsid residues or nucleotides that uniquely characterize these strains is critical in understanding the strain diversity of these viruses. RECOVIR (an acronym for "recognize viruses") software predicts the strains of some ssRNA viruses from their limited sequence data. Novel phylogenetic-tree-based databases of protein or nucleic acid residues that uniquely characterize these virus strains are created. Strains of input virus sequences (partial or complete) are predicted through residue-wise comparisons with the databases. RECOVIR uses unique characterizing residues to identify automatically strains of partial or complete capsid sequences of picorna and caliciviruses, two of the most highly diverse ssRNA virus families. Partition-wise comparisons of the database residues with the corresponding residues of more than 300 complete and partial sequences of these viruses resulted in correct strain identification for all of these sequences. This study shows the feasibility of creating databases of hitherto unknown residues uniquely characterizing the capsid sequences of two of the most highly divergent ssRNA virus families. These databases enable automated strain identification from partial or complete capsid sequences of these human and animal pathogens.

A bimodal biometric identification system

NASA Astrophysics Data System (ADS)

Laghari, Mohammad S.; Khuwaja, Gulzar A.

2013-03-01

Biometrics consists of methods for uniquely recognizing humans based upon one or more intrinsic physical or behavioral traits. Physicals are related to the shape of the body. Behavioral are related to the behavior of a person. However, biometric authentication systems suffer from imprecision and difficulty in person recognition due to a number of reasons and no single biometrics is expected to effectively satisfy the requirements of all verification and/or identification applications. Bimodal biometric systems are expected to be more reliable due to the presence of two pieces of evidence and also be able to meet the severe performance requirements imposed by various applications. This paper presents a neural network based bimodal biometric identification system by using human face and handwritten signature features.

Definition, Identification, Identity, and Culture: A Unique Alchemy Impacting the Success of Gifted African American Millennial Males in School

ERIC Educational Resources Information Center

Bonner, Fred A., II; Lewis, Chance W.; Bowman-Perrott, Lisa; Hill-Jackson, Valerie; James, Marlon

2009-01-01

This article focuses on the underrepresentation of African American males in gifted and talented programs, and offers a number of key recommendations to practitioners and researchers who seek viable strategies to circumvent this problem. Beyond the focus on underrepresentation, several additional topics for discussion are excogitated to provide a…

The re-identification risk of Canadians from longitudinal demographics

PubMed Central

2011-01-01

Background The public is less willing to allow their personal health information to be disclosed for research purposes if they do not trust researchers and how researchers manage their data. However, the public is more comfortable with their data being used for research if the risk of re-identification is low. There are few studies on the risk of re-identification of Canadians from their basic demographics, and no studies on their risk from their longitudinal data. Our objective was to estimate the risk of re-identification from the basic cross-sectional and longitudinal demographics of Canadians. Methods Uniqueness is a common measure of re-identification risk. Demographic data on a 25% random sample of the population of Montreal were analyzed to estimate population uniqueness on postal code, date of birth, and gender as well as their generalizations, for periods ranging from 1 year to 11 years. Results Almost 98% of the population was unique on full postal code, date of birth and gender: these three variables are effectively a unique identifier for Montrealers. Uniqueness increased for longitudinal data. Considerable generalization was required to reach acceptably low uniqueness levels, especially for longitudinal data. Detailed guidelines and disclosure policies on how to ensure that the re-identification risk is low are provided. Conclusions A large percentage of Montreal residents are unique on basic demographics. For non-longitudinal data sets, the three character postal code, gender, and month/year of birth represent sufficiently low re-identification risk. Data custodians need to generalize their demographic information further for longitudinal data sets. PMID:21696636

Assessing the impact of a medical librarian on identification of valid and actionable practice gaps for a continuing medical education committee.

PubMed

Bartkowiak, Barbara A; Safford, Lindsey A; Stratman, Erik J

2014-01-01

Identifying educational needs related to professional practice gaps can be a complex process for continuing medical education (CME) committees and for physicians who submit activity applications. Medical librarians possess unique skills that may be useful for identifying practice gaps relevant to CME committees. We assessed this assumption by assessing a medical librarian's contributions to practice gap identification for the Marshfield Clinic's CME Committee. We reviewed all locally relevant, locally actionable practice gaps identified annually by various stakeholders and presented to our CME Committee from 2010 to 2013. Total numbers of practice gaps identified, total categorized as actionable, and numbers of subsequent activities resulting from these gaps were calculated for each year. Medical librarian totals were compared to those of other CME committee stakeholders to determine the relative contribution. The medical librarian identified unique, actionable published practice gaps that directly contributed to CME activity planning. For each study year, contributions by the medical librarian grew, from 0 of 27 actionable gaps validated by CME Committee in 2010 to 49 of 108 (45.4%) in 2013. With the librarian's assistance, the number of valid practice gaps submitted between 2010 and 2013 by stakeholders climbed from 23 for 155 activities (14.8%) to 133 for 157 activities (84.7%). Medical librarians can provide a valuable service to CME committees by identifying valid professional practice gaps that inform decisions about educational activities aimed at improving clinical practice. Medical librarians bring into deliberations unique information, including national health policy priorities, practice gaps found in the literature, and point-of-care search engine statistics. © 2014 The Alliance for Continuing Education in the Health Professions, the Society for Academic Continuing Medical Education, and the Council on Continuing Medical Education, Association for Hospital Medical Education.

X-ray detection of ingested non-metallic foreign bodies.

PubMed

Saps, Miguel; Rosen, John M; Ecanow, Jacob

2014-05-08

To determine the utility of X-ray in identifying non-metallic foreign body (FB) and assess inter-radiologist agreement in identifying non-metal FB. Focus groups of nurses, fellows, and attending physicians were conducted to determine commonly ingested objects suitable for inclusion. Twelve potentially ingested objects (clay, plastic bead, crayon, plastic ring, plastic army figure, glass bead, paperclip, drywall anchor, eraser, Lego™, plastic triangle toy, and barrette) were embedded in a gelatin slab placed on top of a water-equivalent phantom to simulate density of a child's abdomen. The items were selected due to wide availability and appropriate size for accidental pediatric ingestion. Plain radiography of the embedded FBs was obtained. Five experienced radiologists blinded to number and types of objects were asked to identify the FBs. The radiologist was first asked to count the number of items that were visible then to identify the shape of each item and describe it to a study investigator who recorded all responses. Overall inter-rater reliability was analyzed using percent agreement and κ coefficient. We calculated P value to assess the probability of error involved in accepting the κ value. Fourteen objects were radiographed including 12 original objects and 2 duplicates. The model's validity was supported by clear identification of a radiolucent paperclip as a positive control, and lack of identification of plastic beads (negative control) despite repeated inclusion. Each radiologist identified 7-9 of the 14 objects (mean 8, 67%). Six unique objects (50%) were identified by all radiologists and four unique objects (33%) were not identified by any radiologist (plastic bead, Lego™, plastic triangle toy, and barrette). Identification of objects that were not present, false-positives, occurred 1-2 times per radiologist (mean 1.4). An additional 17% of unique objects were identified by less than half of the radiologists. Agreement between radiologists was considered almost perfect (kappa 0.86 ± 0.08, P < 0.0001). We demonstrate potential non-identification of commonly ingested non-metal FBs in children. A registry for radiographic visibility of ingested objects should be created to improve clinical decision-making.

X-ray detection of ingested non-metallic foreign bodies

PubMed Central

Saps, Miguel; Rosen, John M; Ecanow, Jacob

2014-01-01

AIM: To determine the utility of X-ray in identifying non-metallic foreign body (FB) and assess inter-radiologist agreement in identifying non-metal FB. METHODS: Focus groups of nurses, fellows, and attending physicians were conducted to determine commonly ingested objects suitable for inclusion. Twelve potentially ingested objects (clay, plastic bead, crayon, plastic ring, plastic army figure, glass bead, paperclip, drywall anchor, eraser, Lego™, plastic triangle toy, and barrette) were embedded in a gelatin slab placed on top of a water-equivalent phantom to simulate density of a child’s abdomen. The items were selected due to wide availability and appropriate size for accidental pediatric ingestion. Plain radiography of the embedded FBs was obtained. Five experienced radiologists blinded to number and types of objects were asked to identify the FBs. The radiologist was first asked to count the number of items that were visible then to identify the shape of each item and describe it to a study investigator who recorded all responses. Overall inter-rater reliability was analyzed using percent agreement and κ coefficient. We calculated P value to assess the probability of error involved in accepting the κ value. RESULTS: Fourteen objects were radiographed including 12 original objects and 2 duplicates. The model’s validity was supported by clear identification of a radiolucent paperclip as a positive control, and lack of identification of plastic beads (negative control) despite repeated inclusion. Each radiologist identified 7-9 of the 14 objects (mean 8, 67%). Six unique objects (50%) were identified by all radiologists and four unique objects (33%) were not identified by any radiologist (plastic bead, Lego™, plastic triangle toy, and barrette). Identification of objects that were not present, false-positives, occurred 1-2 times per radiologist (mean 1.4). An additional 17% of unique objects were identified by less than half of the radiologists. Agreement between radiologists was considered almost perfect (kappa 0.86 ± 0.08, P < 0.0001). CONCLUSION: We demonstrate potential non-identification of commonly ingested non-metal FBs in children. A registry for radiographic visibility of ingested objects should be created to improve clinical decision-making. PMID:25254180

United States Homeland Security and National Biometric Identification

DTIC Science & Technology

2002-04-09

security number. Biometrics is the use of unique individual traits such as fingerprints, iris eye patterns, voice recognition, and facial recognition to...technology to control access onto their military bases using a Defense Manpower Management Command developed software application. FACIAL Facial recognition systems...installed facial recognition systems in conjunction with a series of 200 cameras to fight street crime and identify terrorists. The cameras, which are

Yeast proteome map (last update).

PubMed

Perrot, Michel; Moes, Suzette; Massoni, Aurélie; Jenoe, Paul; Boucherie, Hélian

2009-10-01

The identification of proteins separated on 2-D gels is essential to exploit the full potential of 2-D gel electrophoresis for proteomic investigations. For this purpose we have undertaken the systematic identification of Saccharomyces cerevisiae proteins separated on 2-D gels. We report here the identification by mass spectrometry of 100 novel yeast protein spots that have so far not been tackled due to their scarcity on our standard 2-D gels. These identifications extend the number of protein spots identified on our yeast 2-D proteome map to 716. They correspond to 485 unique proteins. Among these, 154 were resolved into several isoforms. The present data set can now be expanded to report for the first time a map of 363 protein isoforms that significantly deepens our knowledge of the yeast proteome. The reference map and a list of all identified proteins can be accessed on the Yeast Protein Map server (www.ibgc.u-bordeaux2.fr/YPM).

Ohmic resistance in a multi-anode MxCs

EPA Pesticide Factsheets

A-3txf_sequence summary.xksx: Abundance of contigs or unique sequences for each biofilm samples from anodes in the MEC reactorHodon Waterloo final_fasta_working.docx: Raw sequences with their identification numbersRNA S1_MEC.docx: Representative sequences with their ID number and taxonomyThis dataset is associated with the following publication:Santodomingo, J., H. Ryu, B. Dhar, and H. Lee. Ohmic resistance affects microbial community and electrochemical kinetics in a multi-anode microbial electrochemical cell. JOURNAL OF POWER SOURCES. Elsevier Science Ltd, New York, NY, USA, 331: 315-321, (2016).

Radio System for Locating Emergency Workers

NASA Technical Reports Server (NTRS)

Larson, William; Medelius, Pedro; Starr, Stan; Bedette, Guy; Taylor, John; Moerk, Steve

2003-01-01

A system based on low-power radio transponders and associated analog and digital electronic circuitry has been developed for locating firefighters and other emergency workers deployed in a building or other structure. The system has obvious potential for saving lives and reducing the risk of injuries. The system includes (1) a central station equipped with a computer and a transceiver; (2) active radio-frequency (RF) identification tags, each placed in a different room or region of the structure; and (3) transponder units worn by the emergency workers. The RF identification tags can be installed in a new building as built-in components of standard fire-detection devices or ground-fault electrical outlets or can be attached to such devices in a previously constructed building, without need for rewiring the building. Each RF identification tag contains information that uniquely identifies it. When each tag is installed, information on its location and identity are reported to, and stored at, the central station. In an emergency, if a building has not been prewired with RF identification tags, leading emergency workers could drop sequentially numbered portable tags in the rooms of the building, reporting the tag numbers and locations by radio to the central station as they proceed.

Identification and verification of hybridoma-derived monoclonal antibody variable region sequences using recombinant DNA technology and mass spectrometry

USDA-ARS?s Scientific Manuscript database

Antibody engineering requires the identification of antigen binding domains or variable regions (VR) unique to each antibody. It is the VR that define the unique antigen binding properties and proper sequence identification is essential for functional evaluation and performance of recombinant antibo...

Comprehensive Identification of Glycated Peptides and Their Glycation Motifs in Plasma and Erythrocytes of Control and Diabetic Subjects

PubMed Central

Zhang, Qibin; Monroe, Matthew E.; Schepmoes, Athena A.; Clauss, Therese R. W.; Gritsenko, Marina A.; Meng, Da; Petyuk, Vladislav A.; Smith, Richard D.; Metz, Thomas O.

2011-01-01

Non-enzymatic glycation of proteins sets the stage for formation of advanced glycation end-products and development of chronic complications of diabetes. In this report, we extended our previous methods on proteomics analysis of glycated proteins to comprehensively identify glycated proteins in control and diabetic human plasma and erythrocytes. Using immunodepletion, enrichment, and fractionation strategies, we identified 7749 unique glycated peptides, corresponding to 3742 unique glycated proteins. Semi-quantitative comparisons showed that glycation levels of a number of proteins were significantly increased in diabetes and that erythrocyte proteins were more extensively glycated than plasma proteins. A glycation motif analysis revealed that some amino acids were favored more than others in the protein primary structures in the vicinity of the glycation sites in both sample types. The glycated peptides and corresponding proteins reported here provide a foundation for potential identification of novel markers for diabetes, hyperglycemia, and diabetic complications in future studies. PMID:21612289

A method for managing re-identification risk from small geographic areas in Canada

PubMed Central

2010-01-01

Background A common disclosure control practice for health datasets is to identify small geographic areas and either suppress records from these small areas or aggregate them into larger ones. A recent study provided a method for deciding when an area is too small based on the uniqueness criterion. The uniqueness criterion stipulates that an the area is no longer too small when the proportion of unique individuals on the relevant variables (the quasi-identifiers) approaches zero. However, using a uniqueness value of zero is quite a stringent threshold, and is only suitable when the risks from data disclosure are quite high. Other uniqueness thresholds that have been proposed for health data are 5% and 20%. Methods We estimated uniqueness for urban Forward Sortation Areas (FSAs) by using the 2001 long form Canadian census data representing 20% of the population. We then constructed two logistic regression models to predict when the uniqueness is greater than the 5% and 20% thresholds, and validated their predictive accuracy using 10-fold cross-validation. Predictor variables included the population size of the FSA and the maximum number of possible values on the quasi-identifiers (the number of equivalence classes). Results All model parameters were significant and the models had very high prediction accuracy, with specificity above 0.9, and sensitivity at 0.87 and 0.74 for the 5% and 20% threshold models respectively. The application of the models was illustrated with an analysis of the Ontario newborn registry and an emergency department dataset. At the higher thresholds considerably fewer records compared to the 0% threshold would be considered to be in small areas and therefore undergo disclosure control actions. We have also included concrete guidance for data custodians in deciding which one of the three uniqueness thresholds to use (0%, 5%, 20%), depending on the mitigating controls that the data recipients have in place, the potential invasion of privacy if the data is disclosed, and the motives and capacity of the data recipient to re-identify the data. Conclusion The models we developed can be used to manage the re-identification risk from small geographic areas. Being able to choose among three possible thresholds, a data custodian can adjust the definition of "small geographic area" to the nature of the data and recipient. PMID:20361870

36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

Code of Federal Regulations, 2014 CFR

2014-07-01

... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the aerial...

36 CFR § 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

Code of Federal Regulations, 2013 CFR

2013-07-01

... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the aerial...

36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

Code of Federal Regulations, 2012 CFR

2012-07-01

... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the aerial...

36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

Code of Federal Regulations, 2011 CFR

2011-07-01

... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the aerial...

36 CFR 1237.24 - What are special considerations for storage and maintenance of aerial photographic records?

Code of Federal Regulations, 2010 CFR

2010-07-01

... maintenance of aerial photographic records? (a) Mark each aerial film container with a unique identification code to facilitate identification and filing. (b) Mark aerial film indexes with the unique aerial film identification codes or container codes for the aerial film that they index. Also, file and mark the aerial...

Identification of iPhone and iPad applications for obstetrics and gynecology providers.

PubMed

Farag, Sara; Chyjek, Kathy; Chen, Katherine T

2014-11-01

To systematically identify the number of applications ("apps") compatible with the iPhone and the iPad that are potentially useful to obstetrician-gynecologists (ob-gyns). Obstetrics and gynecology MeSH terms were searched in the Apple iTunes Store. A master list of unique apps was created and the apps were divided into categories and subcategories. A total of 1,816 unique apps using 55 different obstetrics and gynecology MeSH terms were found. Of these unique apps, 242 apps (13.3%) were considered potentially useful to ob-gyns. The MeSH terms that yielded the highest number of potentially useful apps were "gynecology" (23%), "breast cancer" (17%), "obstetrics" (14%), and "pregnancy" (12%). Less than 15% of apps found were considered potentially useful to ob-gyns. Thus, the obstetrics and gynecology community is in need of an organized effort to identify, review, and determine the accuracy of apps that can potentially improve the performance of health care providers and lead to better patient outcomes. We propose the formation of a committee to guide in this important task.

Evaluating re-identification risks with respect to the HIPAA privacy rule

PubMed Central

Benitez, Kathleen

2010-01-01

Objective Many healthcare organizations follow data protection policies that specify which patient identifiers must be suppressed to share “de-identified” records. Such policies, however, are often applied without knowledge of the risk of “re-identification”. The goals of this work are: (1) to estimate re-identification risk for data sharing policies of the Health Insurance Portability and Accountability Act (HIPAA) Privacy Rule; and (2) to evaluate the risk of a specific re-identification attack using voter registration lists. Measurements We define several risk metrics: (1) expected number of re-identifications; (2) estimated proportion of a population in a group of size g or less, and (3) monetary cost per re-identification. For each US state, we estimate the risk posed to hypothetical datasets, protected by the HIPAA Safe Harbor and Limited Dataset policies by an attacker with full knowledge of patient identifiers and with limited knowledge in the form of voter registries. Results The percentage of a state's population estimated to be vulnerable to unique re-identification (ie, g=1) when protected via Safe Harbor and Limited Datasets ranges from 0.01% to 0.25% and 10% to 60%, respectively. In the voter attack, this number drops for many states, and for some states is 0%, due to the variable availability of voter registries in the real world. We also find that re-identification cost ranges from $0 to $17 000, further confirming risk variability. Conclusions This work illustrates that blanket protection policies, such as Safe Harbor, leave different organizations vulnerable to re-identification at different rates. It provides justification for locally performed re-identification risk estimates prior to sharing data. PMID:20190059

High Resolution Ultrasonic Method for 3D Fingerprint Recognizable Characteristics in Biometrics Identification

NASA Astrophysics Data System (ADS)

Maev, R. Gr.; Bakulin, E. Yu.; Maeva, A.; Severin, F.

Biometrics is a rapidly evolving scientific and applied discipline that studies possible ways of personal identification by means of unique biological characteristics. Such identification is important in various situations requiring restricted access to certain areas, information and personal data and for cases of medical emergencies. A number of automated biometric techniques have been developed, including fingerprint, hand shape, eye and facial recognition, thermographic imaging, etc. All these techniques differ in the recognizable parameters, usability, accuracy and cost. Among these, fingerprint recognition stands alone since a very large database of fingerprints has already been acquired. Also, fingerprints are key evidence left at a crime scene and can be used to indentify suspects. Therefore, of all automated biometric techniques, especially in the field of law enforcement, fingerprint identification seems to be the most promising. We introduce a newer development of the ultrasonic fingerprint imaging. The proposed method obtains a scan only once and then varies the C-scan gate position and width to visualize acoustic reflections from any appropriate depth inside the skin. Also, B-scans and A-scans can be recreated from any position using such data array, which gives the control over the visualization options. By setting the C-scan gate deeper inside the skin, distribution of the sweat pores (which are located along the ridges) can be easily visualized. This distribution should be unique for each individual so this provides a means of personal identification, which is not affected by any changes (accidental or intentional) of the fingers' surface conditions. This paper discusses different setups, acoustic parameters of the system, signal and image processing options and possible ways of 3-dimentional visualization that could be used as a recognizable characteristic in biometric identification.

Automatic and rapid identification of glycopeptides by nano-UPLC-LTQ-FT-MS and proteomic search engine.

PubMed

Giménez, Estela; Gay, Marina; Vilaseca, Marta

2017-01-30

Here we demonstrate the potential of nano-UPLC-LTQ-FT-MS and the Byonic™ proteomic search engine for the separation, detection, and identification of N- and O-glycopeptide glycoforms in standard glycoproteins. The use of a BEH C18 nanoACQUITY column allowed the separation of the glycopeptides present in the glycoprotein digest and a baseline-resolution of the glycoforms of the same glycopeptide on the basis of the number of sialic acids. Moreover, we evaluated several acquisition strategies in order to improve the detection and characterization of glycopeptide glycoforms with the maximum number of identification percentages. The proposed strategy is simple to set up with the technology platforms commonly used in proteomic labs. The method allows the straightforward and rapid obtention of a general glycosylated map of a given protein, including glycosites and their corresponding glycosylated structures. The MS strategy selected in this work, based on a gas phase fractionation approach, led to 136 unique peptides from four standard proteins, which represented 78% of the total number of peptides identified. Moreover, the method does not require an extra glycopeptide enrichment step, thus preventing the bias that this step could cause towards certain glycopeptide species. Data are available via ProteomeXchange with identifier PXD003578. We propose a simple and high-throughput glycoproteomics-based methodology that allows the separation of glycopeptide glycoforms on the basis of the number of sialic acids, and their automatic and rapid identification without prior knowledge of protein glycosites or type and structure of the glycans. Copyright © 2016 Elsevier B.V. All rights reserved.

Ada Compiler Validation Summary Report: Certificate Number: 891212W1. 10205 Irvine Compiler Corporation ICC Ada, 6.0.0 HP 9000 Model 350

DTIC Science & Technology

1989-12-12

which may be produced by any of the five U.S. and European Ada Validation Facilities, the content should be made available to the public. If you have...unique identification number having the form AI-ddddd. Ada Standard ANSI/MIL-STD-1815A, February 1983 and ISO 8652-1987. Applicant The agency requesting...subprocesses -!gnore cfg -no cfg -ncfg Ignore coui gfLags -!noore_ene no-•-m v Ignore l enviorment flags -int Stop at the iform file -keep toys -keep argp

Running Injuries During Adolescence and Childhood.

PubMed

Krabak, Brian J; Snitily, Brian; Milani, Carlo J E

2016-02-01

The popularity of running among young athletes has significantly increased over the past few decades. As the number of children who participate in running increases, so do the potential number of injuries to this group. Proper care of these athletes includes a thorough understanding of the unique physiology of the skeletally immature athlete and common injuries in this age group. Treatment should focus on athlete education, modification of training schedule, and correction of biomechanical deficits contributing to injury. Early identification and correction of these factors will allow a safe return to running sports. Copyright © 2016 Elsevier Inc. All rights reserved.

How (not) to protect genomic data privacy in a distributed network: using trail re-identification to evaluate and design anonymity protection systems.

PubMed

Malin, Bradley; Sweeney, Latanya

2004-06-01

The increasing integration of patient-specific genomic data into clinical practice and research raises serious privacy concerns. Various systems have been proposed that protect privacy by removing or encrypting explicitly identifying information, such as name or social security number, into pseudonyms. Though these systems claim to protect identity from being disclosed, they lack formal proofs. In this paper, we study the erosion of privacy when genomic data, either pseudonymous or data believed to be anonymous, are released into a distributed healthcare environment. Several algorithms are introduced, collectively called RE-Identification of Data In Trails (REIDIT), which link genomic data to named individuals in publicly available records by leveraging unique features in patient-location visit patterns. Algorithmic proofs of re-identification are developed and we demonstrate, with experiments on real-world data, that susceptibility to re-identification is neither trivial nor the result of bizarre isolated occurrences. We propose that such techniques can be applied as system tests of privacy protection capabilities.

Secure ADS-B authentication system and method

NASA Technical Reports Server (NTRS)

Viggiano, Marc J (Inventor); Valovage, Edward M (Inventor); Samuelson, Kenneth B (Inventor); Hall, Dana L (Inventor)

2010-01-01

A secure system for authenticating the identity of ADS-B systems, including: an authenticator, including a unique id generator and a transmitter transmitting the unique id to one or more ADS-B transmitters; one or more ADS-B transmitters, including a receiver receiving the unique id, one or more secure processing stages merging the unique id with the ADS-B transmitter's identification, data and secret key and generating a secure code identification and a transmitter transmitting a response containing the secure code and ADSB transmitter's data to the authenticator; the authenticator including means for independently determining each ADS-B transmitter's secret key, a receiver receiving each ADS-B transmitter's response, one or more secure processing stages merging the unique id, ADS-B transmitter's identification and data and generating a secure code, and comparison processing comparing the authenticator-generated secure code and the ADS-B transmitter-generated secure code and providing an authentication signal based on the comparison result.

HTSFinder: Powerful Pipeline of DNA Signature Discovery by Parallel and Distributed Computing

PubMed Central

Karimi, Ramin; Hajdu, Andras

2016-01-01

Comprehensive effort for low-cost sequencing in the past few years has led to the growth of complete genome databases. In parallel with this effort, a strong need, fast and cost-effective methods and applications have been developed to accelerate sequence analysis. Identification is the very first step of this task. Due to the difficulties, high costs, and computational challenges of alignment-based approaches, an alternative universal identification method is highly required. Like an alignment-free approach, DNA signatures have provided new opportunities for the rapid identification of species. In this paper, we present an effective pipeline HTSFinder (high-throughput signature finder) with a corresponding k-mer generator GkmerG (genome k-mers generator). Using this pipeline, we determine the frequency of k-mers from the available complete genome databases for the detection of extensive DNA signatures in a reasonably short time. Our application can detect both unique and common signatures in the arbitrarily selected target and nontarget databases. Hadoop and MapReduce as parallel and distributed computing tools with commodity hardware are used in this pipeline. This approach brings the power of high-performance computing into the ordinary desktop personal computers for discovering DNA signatures in large databases such as bacterial genome. A considerable number of detected unique and common DNA signatures of the target database bring the opportunities to improve the identification process not only for polymerase chain reaction and microarray assays but also for more complex scenarios such as metagenomics and next-generation sequencing analysis. PMID:26884678

HTSFinder: Powerful Pipeline of DNA Signature Discovery by Parallel and Distributed Computing.

PubMed

Karimi, Ramin; Hajdu, Andras

2016-01-01

Comprehensive effort for low-cost sequencing in the past few years has led to the growth of complete genome databases. In parallel with this effort, a strong need, fast and cost-effective methods and applications have been developed to accelerate sequence analysis. Identification is the very first step of this task. Due to the difficulties, high costs, and computational challenges of alignment-based approaches, an alternative universal identification method is highly required. Like an alignment-free approach, DNA signatures have provided new opportunities for the rapid identification of species. In this paper, we present an effective pipeline HTSFinder (high-throughput signature finder) with a corresponding k-mer generator GkmerG (genome k-mers generator). Using this pipeline, we determine the frequency of k-mers from the available complete genome databases for the detection of extensive DNA signatures in a reasonably short time. Our application can detect both unique and common signatures in the arbitrarily selected target and nontarget databases. Hadoop and MapReduce as parallel and distributed computing tools with commodity hardware are used in this pipeline. This approach brings the power of high-performance computing into the ordinary desktop personal computers for discovering DNA signatures in large databases such as bacterial genome. A considerable number of detected unique and common DNA signatures of the target database bring the opportunities to improve the identification process not only for polymerase chain reaction and microarray assays but also for more complex scenarios such as metagenomics and next-generation sequencing analysis.

Comprehensive genome-wide proteomic analysis of human placental tissue for the Chromosome-Centric Human Proteome Project.

PubMed

Lee, Hyoung-Joo; Jeong, Seul-Ki; Na, Keun; Lee, Min Jung; Lee, Sun Hee; Lim, Jong-Sun; Cha, Hyun-Jeong; Cho, Jin-Young; Kwon, Ja-Young; Kim, Hoguen; Song, Si Young; Yoo, Jong Shin; Park, Young Mok; Kim, Hail; Hancock, William S; Paik, Young-Ki

2013-06-07

As a starting point of the Chromosome-Centric Human Proteome Project (C-HPP), we established strategies of genome-wide proteomic analysis, including protein identification, quantitation of disease-specific proteins, and assessment of post-translational modifications, using paired human placental tissues from healthy and preeclampsia patients. This analysis resulted in identification of 4239 unique proteins with high confidence (two or more unique peptides with a false discovery rate less than 1%), covering 21% of approximately 20, 059 (Ensembl v69, Oct 2012) human proteins, among which 28 proteins exhibited differentially expressed preeclampsia-specific proteins. When these proteins are assigned to all human chromosomes, the pattern of the newly identified placental protein population is proportional to that of the gene count distribution of each chromosome. We also identified 219 unique N-linked glycopeptides, 592 unique phosphopeptides, and 66 chromosome 13-specific proteins. In particular, protein evidence of 14 genes previously known to be specifically up-regulated in human placenta was verified by mass spectrometry. With respect to the functional implication of these proteins, 38 proteins were found to be involved in regulatory factor biosynthesis or the immune system in the placenta, but the molecular mechanism of these proteins during pregnancy warrants further investigation. As far as we know, this work produced the highest number of proteins identified in the placenta and will be useful for annotating and mapping all proteins encoded in the human genome.

Bacterial Volatile Discovery using Solid Phase Microextraction and Comprehensive Two-Dimensional Gas Chromatography–Time-of-Flight Mass Spectrometry

PubMed Central

Bean, Heather D.; Dimandja, Jean-Marie D.; Hill, Jane E.

2014-01-01

Bacteria produce unique volatile mixtures that could be used to identify infectious agents to the species, and possibly the strain level. However, due to the immense variety of human pathogens, and the close relatedness of some of these bacteria, the robust identification of the bacterium based on its volatile metabolome is likely to require a large number of volatile compounds for each species. We applied comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry (GC×GC-TOFMS) to the identification of the headspace volatiles of P. aeruginosa PA14 grown for 24 h in lysogeny broth. This is the first reported use of GC×GC-TOFMS for the characterization of bacterial headspace volatiles. The analytical purity that is afforded by this chromatographic method facilitated the identification of 28 new P. aeruginosa-derived volatiles, nearly doubling the list of volatiles for this species. PMID:22727751

UNiquant, a program for quantitative proteomics analysis using stable isotope labeling.

PubMed

Huang, Xin; Tolmachev, Aleksey V; Shen, Yulei; Liu, Miao; Huang, Lin; Zhang, Zhixin; Anderson, Gordon A; Smith, Richard D; Chan, Wing C; Hinrichs, Steven H; Fu, Kai; Ding, Shi-Jian

2011-03-04

Stable isotope labeling (SIL) methods coupled with nanoscale liquid chromatography and high resolution tandem mass spectrometry are increasingly useful for elucidation of the proteome-wide differences between multiple biological samples. Development of more effective programs for the sensitive identification of peptide pairs and accurate measurement of the relative peptide/protein abundance are essential for quantitative proteomic analysis. We developed and evaluated the performance of a new program, termed UNiquant, for analyzing quantitative proteomics data using stable isotope labeling. UNiquant was compared with two other programs, MaxQuant and Mascot Distiller, using SILAC-labeled complex proteome mixtures having either known or unknown heavy/light ratios. For the SILAC-labeled Jeko-1 cell proteome digests with known heavy/light ratios (H/L = 1:1, 1:5, and 1:10), UNiquant quantified a similar number of peptide pairs as MaxQuant for the H/L = 1:1 and 1:5 mixtures. In addition, UNiquant quantified significantly more peptides than MaxQuant and Mascot Distiller in the H/L = 1:10 mixtures. UNiquant accurately measured relative peptide/protein abundance without the need for postmeasurement normalization of peptide ratios, which is required by the other programs.

UNiquant, a Program for Quantitative Proteomics Analysis Using Stable Isotope Labeling

PubMed Central

Huang, Xin; Tolmachev, Aleksey V.; Shen, Yulei; Liu, Miao; Huang, Lin; Zhang, Zhixin; Anderson, Gordon A.; Smith, Richard D.; Chan, Wing C.; Hinrichs, Steven H.; Fu, Kai; Ding, Shi-Jian

2011-01-01

Stable isotope labeling (SIL) methods coupled with nanoscale liquid chromatography and high resolution tandem mass spectrometry are increasingly useful for elucidation of the proteome-wide differences between multiple biological samples. Development of more effective programs for the sensitive identification of peptide pairs and accurate measurement of the relative peptide/protein abundance are essential for quantitative proteomic analysis. We developed and evaluated the performance of a new program, termed UNiquant, for analyzing quantitative proteomics data using stable isotope labeling. UNiquant was compared with two other programs, MaxQuant and Mascot Distiller, using SILAC-labeled complex proteome mixtures having either known or unknown heavy/light ratios. For the SILAC-labeled Jeko-1 cell proteome digests with known heavy/light ratios (H/L = 1:1, 1:5, and 1:10), UNiquant quantified a similar number of peptide pairs as MaxQuant for the H/L = 1:1 and 1:5 mixtures. In addition, UNiquant quantified significantly more peptides than MaxQuant and Mascot Distiller in the H/L = 1:10 mixtures. UNiquant accurately measured relative peptide/protein abundance without the need for post-measurement normalization of peptide ratios, which is required by the other programs. PMID:21158445

Identification of cultivars and validation of genetic relationships in Mangifera indica L. using RAPD markers.

PubMed

Schnell, R J; Ronning, C M; Knight, R J

1995-02-01

Twenty-five accessions of mango were examined for random amplified polymorphic DNA (RAPD) genetic markers with 80 10-mer random primers. Of the 80 primers screened, 33 did not amplify, 19 were monomorphic, and 28 gave reproducible, polymorphic DNA amplification patterns. Eleven primers were selected from the 28 for the study. The number of bands generated was primer- and genotype-dependent, and ranged from 1 to 10. No primer gave unique banding patterns for each of the 25 accessions; however, ten different combinations of 2 primer banding patterns produced unique fingerprints for each accession. A maternal half-sib (MHS) family was included among the 25 accessions to see if genetic relationships could be detected. RAPD data were used to generate simple matching coefficients, which were analyzed phenetically and by means of principal coordinate analysis (PCA). The MHS clustered together in both the phenetic and the PCA while the randomly selected accessions were scattered with no apparent pattern. The uses of RAPD analysis for Mangifera germ plasm classification and clonal identification are discussed.

Usefullness of palatal rugae patterns in establishing identity: Preliminary results from Bengaluru city, India.

PubMed

Indira, Ap; Gupta, Manish; David, Maria Priscilla

2012-01-01

Palatal rugoscopy is the name given to the study of palatal rugae. Rugae pattern are widely considered to remain unchanged during an individual's lifetime. The rugae pattern has the potential to remain intact by virtue of their internal position in the head when most other anatomical structures are destroyed or burned. Moreover, rugae pattern are considered to be unique similar to fingerprints and are advocated in personal identification. The purpose of the study is to establish, individual identity using palatal rugae patterns. The study group consisted of 100 study models all of whom were subjects above 14 years old. Martin dos Santos' classification was followed based on form and position to assess the individuality of rugae pattern. Each individual had different rugae patterns including dizygous twins and the rugae patterns were not symmetrical, both in number and in its distribution. The preliminary study undertaken here shows no two palates are alike in terms of their rugae pattern. Palatal rugae possess unique characteristics as they are absolutely individualistic and therefore, can be used as a personal soft-tissue 'oral' print for identification in forensic cases.

Identification of proteins from 4200-year-old skin and muscle tissue biopsies from ancient Egyptian mummies of the first intermediate period shows evidence of acute inflammation and severe immune response.

PubMed

Jones, Jana; Mirzaei, Mehdi; Ravishankar, Prathiba; Xavier, Dylan; Lim, Do Seon; Shin, Dong Hoon; Bianucci, Raffaella; Haynes, Paul A

2016-10-28

We performed proteomics analysis on four skin and one muscle tissue samples taken from three ancient Egyptian mummies of the first intermediate period, approximately 4200 years old. The mummies were first dated by radiocarbon dating of the accompany-\\break ing textiles, and morphologically examined by scanning electron microscopy of additional skin samples. Proteins were extracted, separated on SDS-PAGE (sodium dodecyl sulfate polyacrylamide gel electrophoresis) gels, and in-gel digested with trypsin. The resulting peptides were analysed using nanoflow high-performance liquid chromatography-mass spectrometry. We identified a total of 230 unique proteins from the five samples, which consisted of 132 unique protein identifications. We found a large number of collagens, which was confirmed by our microscopy data, and is in agreement with previous studies showing that collagens are very long-lived. As expected, we also found a large number of keratins. We identified numerous proteins that provide evidence of activation of the innate immunity system in two of the mummies, one of which also contained proteins indicating severe tissue inflammation, possibly indicative of an infection that we can speculate may have been related to the cause of death.This article is part of the themed issue 'Quantitative mass spectrometry'. © 2016 The Author(s).

Identification of proteins from 4200-year-old skin and muscle tissue biopsies from ancient Egyptian mummies of the first intermediate period shows evidence of acute inflammation and severe immune response

PubMed Central

Jones, Jana; Mirzaei, Mehdi; Ravishankar, Prathiba; Xavier, Dylan; Lim, Do Seon; Shin, Dong Hoon; Bianucci, Raffaella

2016-01-01

We performed proteomics analysis on four skin and one muscle tissue samples taken from three ancient Egyptian mummies of the first intermediate period, approximately 4200 years old. The mummies were first dated by radiocarbon dating of the accompany-\\break ing textiles, and morphologically examined by scanning electron microscopy of additional skin samples. Proteins were extracted, separated on SDS–PAGE (sodium dodecyl sulfate polyacrylamide gel electrophoresis) gels, and in-gel digested with trypsin. The resulting peptides were analysed using nanoflow high-performance liquid chromatography–mass spectrometry. We identified a total of 230 unique proteins from the five samples, which consisted of 132 unique protein identifications. We found a large number of collagens, which was confirmed by our microscopy data, and is in agreement with previous studies showing that collagens are very long-lived. As expected, we also found a large number of keratins. We identified numerous proteins that provide evidence of activation of the innate immunity system in two of the mummies, one of which also contained proteins indicating severe tissue inflammation, possibly indicative of an infection that we can speculate may have been related to the cause of death. This article is part of the themed issue ‘Quantitative mass spectrometry’. PMID:27644972

48 CFR 252.211-7003 - Item unique identification and valuation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... reader or interrogator, used to retrieve data encoded on machine-readable media. Concatenated unique item... identifier. Item means a single hardware article or a single unit formed by a grouping of subassemblies... manufactured under identical conditions. Machine-readable means an automatic identification technology media...

48 CFR 211.274-2 - Policy for item unique identification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Policy for item unique identification. 211.274-2 Section 211.274-2 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Using and Maintaining...

48 CFR 211.274-2 - Policy for unique item identification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Policy for unique item identification. 211.274-2 Section 211.274-2 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Using and Maintaining...

48 CFR 211.274-2 - Policy for unique item identification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Policy for unique item identification. 211.274-2 Section 211.274-2 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Using and Maintaining...

48 CFR 211.274-2 - Policy for unique item identification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Policy for unique item identification. 211.274-2 Section 211.274-2 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Using and Maintaining...

48 CFR 211.274-2 - Policy for unique item identification.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Policy for unique item identification. 211.274-2 Section 211.274-2 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Using and Maintaining...

21 CFR 830.340 - Voluntary submission of ancillary device identification information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Identification Database § 830.340 Voluntary submission of ancillary device identification information. (a) You may not submit any information to the Global Unique Device Identification Database (GUDID) other than...

78 FR 76840 - Agency Information Collection Activities; Announcement of Office of Management and Budget...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

...] Agency Information Collection Activities; Announcement of Office of Management and Budget Approval... ``Unique Device Identification System'' has been approved by the Office of Management and Budget (OMB... information entitled ``Unique Device Identification System'' to OMB for review and clearance under 44 U.S.C...

A parameter identification method for the rotordynamic coefficients of a high Reynolds number hydrostatic bearing

NASA Technical Reports Server (NTRS)

Rouvas, C.; Childs, D. W.

1993-01-01

In identifying the rotordynamic coefficients of a high-Reynolds-number hydrostatic bearing, fluid-flow induced forces present a unique problem, in that they provide an unmeasureable and uncontrollable excitation to the bearing. An analysis method is developed that effectively eliminates the effects of fluid-flow induced excitation on the estimation of the bearing rotordynamic coefficients, by using power spectral densities. In addition to the theoretical development, the method is verified experimentally by single-frequency testing, and repeatability tests. Results obtained for a bearing are the twelve rotordynamic coefficients (stiffness, damping, and inertia coefficients) as functions of eccentricity ratio, speed, and supply pressure.

Determination of the biometric characteristics of palatine rugae patterns in Uttar Pradesh population: a cross-sectional study.

PubMed

Sekhon, Harjeet Kaur; Sircar, Keya; Singh, Sanjeet; Jawa, Deepti; Sharma, Priyanka

2014-01-01

Identification is the establishment of identity of an individual. The basis of dental identification is based on the observation that no two individuals can have same dentition. Palatal rugae are irregular, asymmetric ridges of the mucous membrane extending laterally from the incisive papilla and the anterior part of the palatal raphe. The location of palatal rugae inside the oral cavity confers them with stability even when exposed to high temperatures or trauma. Their resistance to trauma and their apparent unique appearance has suggested their use as a tool for forensic identification. To record the biometric characteristics of shape, size, direction, number and position of palatal rugae and analyze whether palatal rugoscopy can be used as a tool for personal identification and for sex determination. A cross-sectional study. The sample consisted of 100 subjects (50 males, 50 females) between 18 and 25 years. Maxillary impressions were made with elastomeric impression material and dental stone was used to make models. The palatal rugae patterns were traced and analyzed with a magnifying hand lens. The biometric characteristics of number, size, shape, and direction were analyzed using Thomaz and Kotz classification (1983). The casts were coded to blind the examiners about the identity of the subjects. Unpaired t-test and one-way ANOVA using SPSS 19.0 statistical program for Windows. The average number of rugae was slightly more in females. Wavy (44.9%) and curved (41.8%) shapes were more prevalent. Maximum number of rugae was found in E quadrant (40.73%). The average size was 9.221 mm. Most rugae were forwardly directed in both groups. This study concluded that rugae pattern are highly individualistic and can be used as a supplementary method for personal identification and sex determination. Further inter-observer and intra-observer variability were not found to be significant, which further validates the use of rugoscopy as a forensic tool.

Elucidating Proteoform Families from Proteoform Intact-Mass and Lysine-Count Measurements

PubMed Central

2016-01-01

Proteomics is presently dominated by the “bottom-up” strategy, in which proteins are enzymatically digested into peptides for mass spectrometric identification. Although this approach is highly effective at identifying large numbers of proteins present in complex samples, the digestion into peptides renders it impossible to identify the proteoforms from which they were derived. We present here a powerful new strategy for the identification of proteoforms and the elucidation of proteoform families (groups of related proteoforms) from the experimental determination of the accurate proteoform mass and number of lysine residues contained. Accurate proteoform masses are determined by standard LC–MS analysis of undigested protein mixtures in an Orbitrap mass spectrometer, and the lysine count is determined using the NeuCode isotopic tagging method. We demonstrate the approach in analysis of the yeast proteome, revealing 8637 unique proteoforms and 1178 proteoform families. The elucidation of proteoforms and proteoform families afforded here provides an unprecedented new perspective upon proteome complexity and dynamics. PMID:26941048

High-Throughput Screening based Identification of Small Molecule Antagonists of Integrin CD11b/CD18 Ligand Binding

PubMed Central

Faridi, Mohd Hafeez; Maiguel, Dony; Brown, Brock T.; Suyama, Eigo; Barth, Constantinos J.; Hedrick, Michael; Vasile, Stefan; Sergienko, Eduard; Schürer, Stephan; Gupta, Vineet

2010-01-01

Binding of leukocyte specific integrin CD11b/CD18 to its physiologic ligands is important for the development of normal immune response in vivo. Integrin CD11b/CD18 is also a key cellular effector of various inflammatory and autoimmune diseases. However, small molecules selectively inhibiting the function of integrin CD11b/CD18 are currently lacking. We used a newly described cell-based high throughput screening assay to identify a number of highly potent antagonists of integrin CD11b/CD18 from chemical libraries containing >100,000 unique compounds. Computational analyses suggest that the identified compounds cluster into several different chemical classes. A number of the newly identified compounds blocked adhesion of wild-type mouse neutrophils to CD11b/CD18 ligand fibrinogen. Mapping the most active compounds against chemical fingerprints of known antagonists of related integrin CD11a/CD18 shows little structural similarity, suggesting that the newly identified compounds are novel and unique. PMID:20188705

Protection - Principles and practice.

NASA Technical Reports Server (NTRS)

Graham, G. S.; Denning, P. J.

1972-01-01

The protection mechanisms of computer systems control the access to objects, especially information objects. The principles of protection system design are formalized as a model (theory) of protection. Each process has a unique identification number which is attached by the system to each access attempted by the process. Details of system implementation are discussed, taking into account the storing of the access matrix, aspects of efficiency, and the selection of subjects and objects. Two systems which have protection features incorporating all the elements of the model are described.

21 CFR 830.360 - Records to be maintained by the labeler.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Records to be maintained by the labeler. 830.360 Section 830.360 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES UNIQUE DEVICE IDENTIFICATION Global Unique Device Identification Database § 830...

77 FR 57055 - Agency Information Collection Activities; Proposed Collection; Unique Device Identification...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Parts 16, 801, 803, 806, 810, 814, 820, 821, 822, and 830 [Docket No. FDA-2011-N-0090] RIN 0910-AG31 Agency Information Collection Activities; Proposed Collection; Unique Device Identification System; Extension of Comment Period...

Network-Based Identification of Adaptive Pathways in Evolved Ethanol-Tolerant Bacterial Populations

PubMed Central

Swings, Toon; Weytjens, Bram; Schalck, Thomas; Bonte, Camille; Verstraeten, Natalie; Michiels, Jan

2017-01-01

Abstract Efficient production of ethanol for use as a renewable fuel requires organisms with a high level of ethanol tolerance. However, this trait is complex and increased tolerance therefore requires mutations in multiple genes and pathways. Here, we use experimental evolution for a system-level analysis of adaptation of Escherichia coli to high ethanol stress. As adaptation to extreme stress often results in complex mutational data sets consisting of both causal and noncausal passenger mutations, identifying the true adaptive mutations in these settings is not trivial. Therefore, we developed a novel method named IAMBEE (Identification of Adaptive Mutations in Bacterial Evolution Experiments). IAMBEE exploits the temporal profile of the acquisition of mutations during evolution in combination with the functional implications of each mutation at the protein level. These data are mapped to a genome-wide interaction network to search for adaptive mutations at the level of pathways. The 16 evolved populations in our data set together harbored 2,286 mutated genes with 4,470 unique mutations. Analysis by IAMBEE significantly reduced this number and resulted in identification of 90 mutated genes and 345 unique mutations that are most likely to be adaptive. Moreover, IAMBEE not only enabled the identification of previously known pathways involved in ethanol tolerance, but also identified novel systems such as the AcrAB-TolC efflux pump and fatty acids biosynthesis and even allowed to gain insight into the temporal profile of adaptation to ethanol stress. Furthermore, this method offers a solid framework for identifying the molecular underpinnings of other complex traits as well. PMID:28961727

Identifiability of conservative linear mechanical systems. [applied to large flexible spacecraft structures

NASA Technical Reports Server (NTRS)

Sirlin, S. W.; Longman, R. W.; Juang, J. N.

1985-01-01

With a sufficiently great number of sensors and actuators, any finite dimensional dynamic system is identifiable on the basis of input-output data. It is presently indicated that, for conservative nongyroscopic linear mechanical systems, the number of sensors and actuators required for identifiability is very large, where 'identifiability' is understood as a unique determination of the mass and stiffness matrices. The required number of sensors and actuators drops by a factor of two, given a relaxation of the identifiability criterion so that identification can fail only if the system parameters being identified lie in a set of measure zero. When the mass matrix is known a priori, this additional information does not significantly affect the requirements for guaranteed identifiability, though the number of parameters to be determined is reduced by a factor of two.

48 CFR 252.211-7006 - Passive Radio Frequency Identification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... radio frequency identification (RFID) or item unique identification (IUID) information, order... CodeTM (EPC®) means an identification scheme for universally identifying physical objects via RFID tags... passive RFID technology. Exterior container means a MIL-STD-129 defined container, bundle, or assembly...

48 CFR 252.211-7006 - Passive Radio Frequency Identification.

Code of Federal Regulations, 2012 CFR

2012-10-01

... radio frequency identification (RFID) or item unique identification (IUID) information, order... CodeTM (EPC®) means an identification scheme for universally identifying physical objects via RFID tags... passive RFID technology. Exterior container means a MIL-STD-129 defined container, bundle, or assembly...

48 CFR 252.211-7006 - Passive Radio Frequency Identification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... radio frequency identification (RFID) or item unique identification (IUID) information, order... CodeTM (EPC®) means an identification scheme for universally identifying physical objects via RFID tags... passive RFID technology. Exterior container means a MIL-STD-129 defined container, bundle, or assembly...

Identification of three novel NHS mutations in families with Nance-Horan syndrome.

PubMed

Huang, Kristen M; Wu, Junhua; Brooks, Simon P; Hardcastle, Alison J; Lewis, Richard Alan; Stambolian, Dwight

2007-03-27

Nance-Horan Syndrome (NHS) is an infrequent and often overlooked X-linked disorder characterized by dense congenital cataracts, microphthalmia, and dental abnormalities. The syndrome is caused by mutations in the NHS gene, whose function is not known. The purpose of this study was to identify the frequency and distribution of NHS gene mutations and compare genotype with Nance-Horan phenotype in five North American NHS families. Genomic DNA was isolated from white blood cells from NHS patients and family members. The NHS gene coding region and its splice site donor and acceptor regions were amplified from genomic DNA by PCR, and the amplicons were sequenced directly. We identified three unique NHS coding region mutations in these NHS families. This report extends the number of unique identified NHS mutations to 14.

Developing biochemical and molecular markers for cyanobacterial inoculants.

PubMed

Prasanna, R; Madhan, K; Singh, R N; Chauhan, A K; Nain, L

2010-09-01

Markers for evaluating the establishment of cyanobacteria based on their sensitivity or resistance to antibiotics, saccharide utilization patterns and PCR generated fingerprints were developed. Four selected strains (isolates from rhizosphere soils of diverse agro-ecosystems) have shown potential as diazotrophs and exhibited plant growth promoting abilities. Different responses were obtained on screening against 40 antibiotics, which aided in developing selectable antibiotic markers for each strain. Biochemical profiles generated using standardized chromogenic identification system (including saccharide utilization tests) revealed that 53 % of the saccharides tested were not utilized by any strain, while some strains exhibited unique ability for utilization of saccharides such as melibiose, cellobiose, maltose and glucosamine. PCR based amplification profiles developed using a number of primers based on repeat sequences revealed the utility of 3 primers in providing unique fingerprints for the strains.

Usefullness of palatal rugae patterns in establishing identity: Preliminary results from Bengaluru city, India

PubMed Central

Indira, AP; Gupta, Manish; David, Maria Priscilla

2012-01-01

Introduction: Palatal rugoscopy is the name given to the study of palatal rugae. Rugae pattern are widely considered to remain unchanged during an individual's lifetime. The rugae pattern has the potential to remain intact by virtue of their internal position in the head when most other anatomical structures are destroyed or burned. Moreover, rugae pattern are considered to be unique similar to fingerprints and are advocated in personal identification. Objectives: The purpose of the study is to establish, individual identity using palatal rugae patterns. Materials and Methods: The study group consisted of 100 study models all of whom were subjects above 14 years old. Martin dos Santos’ classification was followed based on form and position to assess the individuality of rugae pattern. Results: Each individual had different rugae patterns including dizygous twins and the rugae patterns were not symmetrical, both in number and in its distribution. Conclusion: The preliminary study undertaken here shows no two palates are alike in terms of their rugae pattern. Palatal rugae possess unique characteristics as they are absolutely individualistic and therefore, can be used as a personal soft-tissue ‘oral’ print for identification in forensic cases. PMID:23087574

Serial analysis of gene expression in the silkworm, Bombyx mori.

PubMed

Huang, Jianhua; Miao, Xuexia; Jin, Weirong; Couble, Pierre; Mita, Kasuei; Zhang, Yong; Liu, Wenbin; Zhuang, Leijun; Shen, Yan; Keime, Celine; Gandrillon, Olivier; Brouilly, Patrick; Briolay, Jerome; Zhao, Guoping; Huang, Yongping

2005-08-01

The silkworm Bombyx mori is one of the most economically important insects and serves as a model for Lepidoptera insects. We used serial analysis of gene expression (SAGE) to derive profiles of expressed genes during the developmental life cycle of the silkworm and to create a reference for understanding silkworm metamorphosis. We generated four SAGE libraries, one from each of the four developmental stages of the silkworm. In total we obtained 257,964 SAGE tags, of which 39,485 were unique tags. Sorted by copy number, 14.1% of the unique tags were detected at a median to high level (five or more copies), 24.2% at lower levels (two to four copies), and 61.7% as single copies. Using a basic local alignment search tool on the EST database, 35% of the tags matched known silkworm expressed sequence tags. SAGE demonstrated that a number of the genes were up- or down-regulated during the four developmental phases of the egg, larva, pupa, and adult. Furthermore, we found that the generation of longer cDNA fragments from SAGE tags constituted the most efficient method of gene identification, which facilitated the analysis of a large number of unknown genes.

On the identification of continuous vibrating systems modelled by hyperbolic partial differential equations

NASA Technical Reports Server (NTRS)

Udwadia, F. E.; Garba, J. A.

1983-01-01

This paper deals with the identification of spatially varying parameters in systems of finite spatial extent which can be described by second order hyperbolic differential equations. Two questions have been addressed. The first deals with 'partial identification' and inquires into the possibility of retrieving all the eigenvalues of the system from response data obtained at one location x-asterisk epsilon (0, 1). The second deals with the identification of the distributed coefficients rho(x), a(x) and b(x). Sufficient conditions for unique identification of all the eigenvalues of the system are obtained, and conditions under which the coefficients can be uniquely identified using suitable response data obtained at one point in the spatial domain are determined. Application of the results and their usefulness is demonstrated in the identification of the properties of tall building structural systems subjected to dynamic load environments.

Predicting nurses' acceptance of radiofrequency identification technology.

PubMed

Norten, Adam

2012-10-01

The technology of radiofrequency identification allows for the scanning of radiofrequency identification-tagged objects and individuals without line-of-sight requirements. Healthcare organizations use radiofrequency identification to ensure the health and safety of patients and medical personnel and to uncover inefficiencies. Although the successful implementation of a system incorporating radiofrequency identification technologies requires acceptance and use of the technology, some nurses using radiofrequency identification in hospitals feel like "Big Brother" is watching them. This predictive study used a theoretical model assessing the effect of five independent variables: privacy concerns, attitudes, subjective norms, controllability, and self-efficacy, on a dependent variable, nurses' behavioral intention to use radiofrequency identification. A Web-based questionnaire containing previously validated questions was answered by 106 US RNs. Multiple linear regression showed that all constructs together accounted for 60% of the variance in nurses' intention to use radiofrequency identification. Of the predictors in the model, attitudes provided the largest unique contribution when the other predictors in the model were held constant; subjective norms also provided a unique contribution. Privacy concerns, controllability, and self-efficacy did not provide a significant contribution to nurses' behavioral intention to use radiofrequency identification.

MixGF: spectral probabilities for mixture spectra from more than one peptide.

PubMed

Wang, Jian; Bourne, Philip E; Bandeira, Nuno

2014-12-01

In large-scale proteomic experiments, multiple peptide precursors are often cofragmented simultaneously in the same mixture tandem mass (MS/MS) spectrum. These spectra tend to elude current computational tools because of the ubiquitous assumption that each spectrum is generated from only one peptide. Therefore, tools that consider multiple peptide matches to each MS/MS spectrum can potentially improve the relatively low spectrum identification rate often observed in proteomics experiments. More importantly, data independent acquisition protocols promoting the cofragmentation of multiple precursors are emerging as alternative methods that can greatly improve the throughput of peptide identifications but their success also depends on the availability of algorithms to identify multiple peptides from each MS/MS spectrum. Here we address a fundamental question in the identification of mixture MS/MS spectra: determining the statistical significance of multiple peptides matched to a given MS/MS spectrum. We propose the MixGF generating function model to rigorously compute the statistical significance of peptide identifications for mixture spectra and show that this approach improves the sensitivity of current mixture spectra database search tools by a ≈30-390%. Analysis of multiple data sets with MixGF reveals that in complex biological samples the number of identified mixture spectra can be as high as 20% of all the identified spectra and the number of unique peptides identified only in mixture spectra can be up to 35.4% of those identified in single-peptide spectra. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

MixGF: Spectral Probabilities for Mixture Spectra from more than One Peptide*

PubMed Central

Wang, Jian; Bourne, Philip E.; Bandeira, Nuno

2014-01-01

In large-scale proteomic experiments, multiple peptide precursors are often cofragmented simultaneously in the same mixture tandem mass (MS/MS) spectrum. These spectra tend to elude current computational tools because of the ubiquitous assumption that each spectrum is generated from only one peptide. Therefore, tools that consider multiple peptide matches to each MS/MS spectrum can potentially improve the relatively low spectrum identification rate often observed in proteomics experiments. More importantly, data independent acquisition protocols promoting the cofragmentation of multiple precursors are emerging as alternative methods that can greatly improve the throughput of peptide identifications but their success also depends on the availability of algorithms to identify multiple peptides from each MS/MS spectrum. Here we address a fundamental question in the identification of mixture MS/MS spectra: determining the statistical significance of multiple peptides matched to a given MS/MS spectrum. We propose the MixGF generating function model to rigorously compute the statistical significance of peptide identifications for mixture spectra and show that this approach improves the sensitivity of current mixture spectra database search tools by a ≈30–390%. Analysis of multiple data sets with MixGF reveals that in complex biological samples the number of identified mixture spectra can be as high as 20% of all the identified spectra and the number of unique peptides identified only in mixture spectra can be up to 35.4% of those identified in single-peptide spectra. PMID:25225354

Analysis of Wastewater for Organic Compounds Unique to RDX/HMX manufacturing and Processing

DTIC Science & Technology

1979-12-01

Evaporation 6.. ............ 6 Analytical Separation’and Identification.• 6Gas Chromatography. 6 Liquid Chromatography ( LC )’and’Infrared Analyses (iR...steam-heated system. This conclusion was arrived at by comparing chromatograms relative to numbers of, and intensity of the component peaks . Analytical...for chromatographing the samples are listed below: (1) 10% UC-W-98 on Chrom G-AW-DMCS 0.61 m x 6.3 mm (2 ft. x ¼ in.) glass col umn (2) 10% UC-W-98 on

Bayesian Exploratory Factor Analysis

PubMed Central

Conti, Gabriella; Frühwirth-Schnatter, Sylvia; Heckman, James J.; Piatek, Rémi

2014-01-01

This paper develops and applies a Bayesian approach to Exploratory Factor Analysis that improves on ad hoc classical approaches. Our framework relies on dedicated factor models and simultaneously determines the number of factors, the allocation of each measurement to a unique factor, and the corresponding factor loadings. Classical identification criteria are applied and integrated into our Bayesian procedure to generate models that are stable and clearly interpretable. A Monte Carlo study confirms the validity of the approach. The method is used to produce interpretable low dimensional aggregates from a high dimensional set of psychological measurements. PMID:25431517

Network-Based Identification of Adaptive Pathways in Evolved Ethanol-Tolerant Bacterial Populations.

PubMed

Swings, Toon; Weytjens, Bram; Schalck, Thomas; Bonte, Camille; Verstraeten, Natalie; Michiels, Jan; Marchal, Kathleen

2017-11-01

Efficient production of ethanol for use as a renewable fuel requires organisms with a high level of ethanol tolerance. However, this trait is complex and increased tolerance therefore requires mutations in multiple genes and pathways. Here, we use experimental evolution for a system-level analysis of adaptation of Escherichia coli to high ethanol stress. As adaptation to extreme stress often results in complex mutational data sets consisting of both causal and noncausal passenger mutations, identifying the true adaptive mutations in these settings is not trivial. Therefore, we developed a novel method named IAMBEE (Identification of Adaptive Mutations in Bacterial Evolution Experiments). IAMBEE exploits the temporal profile of the acquisition of mutations during evolution in combination with the functional implications of each mutation at the protein level. These data are mapped to a genome-wide interaction network to search for adaptive mutations at the level of pathways. The 16 evolved populations in our data set together harbored 2,286 mutated genes with 4,470 unique mutations. Analysis by IAMBEE significantly reduced this number and resulted in identification of 90 mutated genes and 345 unique mutations that are most likely to be adaptive. Moreover, IAMBEE not only enabled the identification of previously known pathways involved in ethanol tolerance, but also identified novel systems such as the AcrAB-TolC efflux pump and fatty acids biosynthesis and even allowed to gain insight into the temporal profile of adaptation to ethanol stress. Furthermore, this method offers a solid framework for identifying the molecular underpinnings of other complex traits as well. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Utility of the Montreal assessment of need questionnaire for community mental health planning.

PubMed

Tremblay, Jacques; Bamvita, Jean-Marie; Grenier, Guy; Fleury, Marie-Josée

2014-09-01

Needs assessment facilitates mental health services planning, provision, and evaluation. This study aimed to (a) validate a new instrument, the Montreal Assessment of Needs Questionnaire (MANQ), and (b) use this to assess variations and predictors of need (number and seriousness) in 297 individuals with severe mental disorders for 18 months, during implementation of the Quebec Mental Health Action Plan. MANQ internal and external validations were adequate. Variables significantly associated with need number and seriousness variations were used to build multiple linear regression models. Autonomous housing, not receiving welfare, not having consulted a health educator, higher level of help from services, Alcohol Use Disorders Identification Test total score, and social support were associated with decreasing need number and seriousness over time. Having a higher education was also associated with decreasing need number. In a reform context, the MANQ's unique ability to detect rapid improvement in patient needs has usefulness for Quebec mental health planning.

Random patterns and biometrics for counterfeit deterrence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolk, K.M.

1993-12-31

Sandia National Laboratories (SNL) has been working on non-counterfeitable seals, tags, and documents for over fifteen years. During that time, several technologies have been developed that can be applied to deter counterfeiting of identification documents such as ID cards, passports, and possibly credit cards. Two technologies are presented in some detail. The first is reflective particle tagging technology that was developed to help verify treaties limiting the numbers of nuclear weapons that participating parties may possess. This approach uses the random locations and orientations of reflective particles applied to the surface of an item to uniquely identify the item. Themore » resulting tags are secure against even the most determined adversaries. The second technology uses biometric information printed on the document and public key cryptography to ensure that an adversary cannot issue identification documents to unauthorized individuals.« less

Forensic implications of the variation in morphology of marginal serrations on the teeth of the great white shark.

PubMed

Nambiar, P; Brown, K A; Bridges, T E

1996-06-01

The teeth of the Great White Shark have been examined to ascertain whether there is any commonality in the arrangement or number of the marginal serrations (peaks) or, indeed, whether individual sharks have a unique pattern of shapes or size of the peaks. The teeth of the White Shark are characteristic in size and shape with serrations along almost the entire mesial and distal margins. This study has revealed no consistent pattern of size or arrangement of the marginal serrations that was sufficiently characteristic within an individual shark to serve as a reliable index of identification of a tooth as originating from that particular shark. Nonetheless, the serrations are sufficiently distinctive to enable the potential identification of an individual tooth as having been the cause of a particular bitemark.

Identification of three novel NHS mutations in families with Nance-Horan syndrome

PubMed Central

Wu, Junhua; Brooks, Simon P.; Hardcastle, Alison J.; Lewis, Richard Alan; Stambolian, Dwight

2007-01-01

Purpose Nance-Horan Syndrome (NHS) is an infrequent and often overlooked X-linked disorder characterized by dense congenital cataracts, microphthalmia, and dental abnormalities. The syndrome is caused by mutations in the NHS gene, whose function is not known. The purpose of this study was to identify the frequency and distribution of NHS gene mutations and compare genotype with Nance-Horan phenotype in five North American NHS families. Methods Genomic DNA was isolated from white blood cells from NHS patients and family members. The NHS gene coding region and its splice site donor and acceptor regions were amplified from genomic DNA by PCR, and the amplicons were sequenced directly. Results We identified three unique NHS coding region mutations in these NHS families. Conclusions This report extends the number of unique identified NHS mutations to 14. PMID:17417607

Submegabase Clusters of Unstable Tandem Repeats Unique to the Tla Region of Mouse T Haplotypes

PubMed Central

Uehara, H.; Ebersole, T.; Bennett, D.; Artzt, K.

1990-01-01

We describe here the identification and genomic organization of mouse t haplotype-specific elements (TSEs) 7.8 and 5.8 kb in length. The TSEs exist as submegabase-long clusters of tandem repeats localized in the Tla region of the major histocompatibility complex of all t haplotype chromosomes examined. In contrast, no such clusters were detected among 12 inbred strains of Mus musculus and other Mus species; thus, clusters of TSEs represent the first absolutely qualitative difference between t haplotypes and wild-type chromosomes. Pulsed field gel electrophoresis shows that the number of clusters, and the number of repeats in each cluster are extremely variable. Dramatic quantitative differences of TSEs uniquely distinguish every independent t haplotype from any other. The complete nucleotide sequence of one 7.8-kb TSE reveals significant homology to the ETn (a major transcript in the early embryo of the mouse), and some homologies to intracisternal A-particles and the mammary tumor virus env gene. Apart from the diagnostic relevance to t haplotypes, evolutionary and functional significances are discussed with respect to chromosome structure and genetic recombination. PMID:2076812

Complete Hexose Isomer Identification with Mass Spectrometry

NASA Astrophysics Data System (ADS)

Nagy, Gabe; Pohl, Nicola L. B.

2015-04-01

The first analytical method is presented for the identification and absolute configuration determination of all 24 aldohexose and 2-ketohexose isomers, including the D and L enantiomers for allose, altrose, galactose, glucose, gulose, idose, mannose, talose, fructose, psicose, sorbose, and tagatose. Two unique fixed ligand kinetic method combinations were discovered to create significant enough energetic differences to achieve chiral discrimination among all 24 hexoses. Each of these 24 hexoses yields unique ratios of a specific pair of fragment ions that allows for simultaneous determination of identification and absolute configuration. This mass spectrometric-based methodology can be readily employed for accurate identification of any isolated monosaccharide from an unknown biological source. This work provides a key step towards the goal of complete de novo carbohydrate analysis.

Integrated genomics for pinpointing survival loci within arm-level somatic copy number alterations

PubMed Central

Roy, David M.; Walsh, Logan A.; Desrichard, Alexis; Huse, Jason T.; Wu, Wei; Gao, JianJiong; Bose, Promita; Lee, William; Chan, Timothy A.

2016-01-01

SUMMARY The identification of driver loci underlying arm-level somatic copy number alterations (SCNAs) in cancer has remained challenging and incomplete. Here we assess the relative impact and present a detailed landscape of arm-level SCNAs in 10985 patient samples across 33 cancer types from The Cancer Genome Atlas (TCGA). Further, using chromosome 9p loss in lower grade glioma (LGG) as a model, we employ a unique multi-tiered genomic dissection strategy using 540 patients from 3 independent LGG datasets to identify genetic loci that govern tumor aggressiveness and poor survival. This comprehensive approach uncovered several 9p loss-specific prognostic markers, validated existing ones, and re-defined the impact of CDKN2A loss in LGG. PMID:27165745

33 CFR 181.29 - Hull identification number display.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Hull identification number... identification number display. Two identical hull identification numbers are required to be displayed on each boat hull. (a) The primary hull identification number must be affixed— (1) On boats with transoms, to...

33 CFR 181.29 - Hull identification number display.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Hull identification number... identification number display. Two identical hull identification numbers are required to be displayed on each boat hull. (a) The primary hull identification number must be affixed— (1) On boats with transoms, to...

16 CFR 303.20 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 303.20... identification numbers. (a) Registered numbers for use as the required identification in lieu of the name on... the form set out in paragraph (d) of this section. (b)(1) Registered identification numbers shall be...

Biopharmaceutics data management system for anonymised data sharing and curation: First application with orbito IMI project.

PubMed

Lacy-Jones, Kristin; Hayward, Philip; Andrews, Steve; Gledhill, Ian; McAllister, Mark; Abrahamsson, Bertil; Rostami-Hodjegan, Amin; Pepin, Xavier

2017-03-01

The OrBiTo IMI project was designed to improve the understanding and modelling of how drugs are absorbed. To achieve this 13 pharmaceutical companies agreed to share biopharmaceutics drug properties and performance data, as long as they were able to hide certain aspects of their dataset if required. This data was then used in simulations to test how three in silico Physiological Based Pharmacokinetic (PBPK) tools performed. A unique database system was designed and implemented to store the drug data. The database system was unique, in that it had the ability to make different sections of a dataset visible or hidden depending on the stage of the project. Users were also given the option to hide identifying API attributes, to help prevent identification of project members from previously published data. This was achieved by applying blinding strategies to data parameters and the adoption of a unique numbering system. An anonymous communication tool was proposed to exchange comments about data, which enabled its curation and evolution. This paper describes the strategy adopted for numbering and blinding of the data, the tools developed to gather and search data as well as the tools used for communicating around the data with the aim of publicising the approach for other pre-competitive research between organisations. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Individual identification via electrocardiogram analysis.

PubMed

Fratini, Antonio; Sansone, Mario; Bifulco, Paolo; Cesarelli, Mario

2015-08-14

During last decade the use of ECG recordings in biometric recognition studies has increased. ECG characteristics made it suitable for subject identification: it is unique, present in all living individuals, and hard to forge. However, in spite of the great number of approaches found in literature, no agreement exists on the most appropriate methodology. This study aimed at providing a survey of the techniques used so far in ECG-based human identification. Specifically, a pattern recognition perspective is here proposed providing a unifying framework to appreciate previous studies and, hopefully, guide future research. We searched for papers on the subject from the earliest available date using relevant electronic databases (Medline, IEEEXplore, Scopus, and Web of Knowledge). The following terms were used in different combinations: electrocardiogram, ECG, human identification, biometric, authentication and individual variability. The electronic sources were last searched on 1st March 2015. In our selection we included published research on peer-reviewed journals, books chapters and conferences proceedings. The search was performed for English language documents. 100 pertinent papers were found. Number of subjects involved in the journal studies ranges from 10 to 502, age from 16 to 86, male and female subjects are generally present. Number of analysed leads varies as well as the recording conditions. Identification performance differs widely as well as verification rate. Many studies refer to publicly available databases (Physionet ECG databases repository) while others rely on proprietary recordings making difficult them to compare. As a measure of overall accuracy we computed a weighted average of the identification rate and equal error rate in authentication scenarios. Identification rate resulted equal to 94.95 % while the equal error rate equal to 0.92 %. Biometric recognition is a mature field of research. Nevertheless, the use of physiological signals features, such as the ECG traits, needs further improvements. ECG features have the potential to be used in daily activities such as access control and patient handling as well as in wearable electronics applications. However, some barriers still limit its growth. Further analysis should be addressed on the use of single lead recordings and the study of features which are not dependent on the recording sites (e.g. fingers, hand palms). Moreover, it is expected that new techniques will be developed using fiducials and non-fiducial based features in order to catch the best of both approaches. ECG recognition in pathological subjects is also worth of additional investigations.

14 CFR 221.203 - Unique rule numbers required.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Unique rule numbers required. 221.203... PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Electronically Filed Tariffs § 221.203 Unique rule numbers required... bear a unique rule number. (b) The unique rule numbers for the fares specified in this section shall be...

Privacy-preserving record linkage using Bloom filters

PubMed Central

2009-01-01

Background Combining multiple databases with disjunctive or additional information on the same person is occurring increasingly throughout research. If unique identification numbers for these individuals are not available, probabilistic record linkage is used for the identification of matching record pairs. In many applications, identifiers have to be encrypted due to privacy concerns. Methods A new protocol for privacy-preserving record linkage with encrypted identifiers allowing for errors in identifiers has been developed. The protocol is based on Bloom filters on q-grams of identifiers. Results Tests on simulated and actual databases yield linkage results comparable to non-encrypted identifiers and superior to results from phonetic encodings. Conclusion We proposed a protocol for privacy-preserving record linkage with encrypted identifiers allowing for errors in identifiers. Since the protocol can be easily enhanced and has a low computational burden, the protocol might be useful for many applications requiring privacy-preserving record linkage. PMID:19706187

Redescription of Liza bandialensis (Teleostei: Mugilidae) with an identification key to mullet species of Eastern Central Atlantic.

PubMed

Trape, Sébastien; Harrison, Ian J; Diouf, Papa Samba; Durand, Jean-Dominique

2012-02-01

Liza bandialensis Diouf 1991 is redescribed because previous descriptions have not been in well-distributed publications and have lacked sufficient detail or reference to voucher specimens. The description provided here is based on specimens from the Sine Saloum estuary, Senegal (West Africa), from where the species was originally described. The distinctness of the species is confirmed both by meristic and molecular criteria. L. bandialensis presents a unique combination of characters with a low number of scales in the longitudinal series (32-33), 10.5-12 transverse scale rows, and distinctly yellowish dorsal, anal, and caudal fins. The currently known distribution of L. bandialensis includes coastal waters of Senegal, Gambia and Guinea Bissau. Finally, we provide a morphological identification key for the sixteen species of Mugilidae species occurring along the eastern central Atlantic coast of Africa. Copyright © 2011 Académie des sciences. All rights reserved.

Privacy-preserving record linkage using Bloom filters.

PubMed

Schnell, Rainer; Bachteler, Tobias; Reiher, Jörg

2009-08-25

Combining multiple databases with disjunctive or additional information on the same person is occurring increasingly throughout research. If unique identification numbers for these individuals are not available, probabilistic record linkage is used for the identification of matching record pairs. In many applications, identifiers have to be encrypted due to privacy concerns. A new protocol for privacy-preserving record linkage with encrypted identifiers allowing for errors in identifiers has been developed. The protocol is based on Bloom filters on q-grams of identifiers. Tests on simulated and actual databases yield linkage results comparable to non-encrypted identifiers and superior to results from phonetic encodings. We proposed a protocol for privacy-preserving record linkage with encrypted identifiers allowing for errors in identifiers. Since the protocol can be easily enhanced and has a low computational burden, the protocol might be useful for many applications requiring privacy-preserving record linkage.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Qibin; Monroe, Matthew E.; Schepmoes, Athena A.

Non-enzymatic glycation of proteins is implicated in diabetes mellitus and its related complications. In this report, we extend our previous development and refinement of proteomics-based methods for the analysis of non-enzymatically glycated proteins to comprehensively identify glycated proteins in normal and diabetic human plasma and erythrocytes. Using immunodepletion, enrichment, and fractionation strategies, we identified 7749 unique glycated peptides, corresponding to 3742 unique glycated proteins. Semi-quantitative comparisons revealed a number of proteins with glycation levels significantly increased in diabetes relative to control samples and that erythrocyte proteins are more extensively glycated than plasma proteins. A glycation motif analysis revealed amino acidsmore » that are favored more than others in the protein primary structures in the vicinity of the glycation sites in both sample types. The glycated peptides and corresponding proteins reported here provide a foundation for the potential identification of novel markers for diabetes, glycemia, or diabetic complications.« less

Advancing epilepsy treatment through personalized genetic zebrafish models.

PubMed

Griffin, A; Krasniak, C; Baraban, S C

2016-01-01

With an increase in the number of disease causing genetic mutations identified from epilepsy cohorts, zebrafish are proving to be an attractive vertebrate model for functional analysis of these allele variants. Not only do zebrafish have conserved gene functions, but larvae harboring mutations in identified human epileptic genes show spontaneous seizure activity and mimic the convulsive behavioral movements observed in humans. With zebrafish being compatible with medium to high-throughput screening, they are also proving to be a unique and powerful system for early preclinical drug screening, including novel target identification, pharmacology, and toxicology. Additionally, with recent advances in genomic engineering technologies, it is now possible to study the precise pathophysiology of patient-specific gene mutations in zebrafish. The following sections highlight how the unique attributes of zebrafish, in combination with genetic modifications, are continuing to transform our understanding of epilepsy and help identify personalized therapeutics for specific patient cohorts. © 2016 Elsevier B.V. All rights reserved.

Human embryonic stem cell phosphoproteome revealed by electron transfer dissociation tandem mass spectrometry.

PubMed

Swaney, Danielle L; Wenger, Craig D; Thomson, James A; Coon, Joshua J

2009-01-27

Protein phosphorylation is central to the understanding of cellular signaling, and cellular signaling is suggested to play a major role in the regulation of human embryonic stem (ES) cell pluripotency. Here, we describe the use of conventional tandem mass spectrometry-based sequencing technology--collision-activated dissociation (CAD)--and the more recently developed method electron transfer dissociation (ETD) to characterize the human ES cell phosphoproteome. In total, these experiments resulted in the identification of 11,995 unique phosphopeptides, corresponding to 10,844 nonredundant phosphorylation sites, at a 1% false discovery rate (FDR). Among these phosphorylation sites are 5 localized to 2 pluripotency critical transcription factors--OCT4 and SOX2. From these experiments, we conclude that ETD identifies a larger number of unique phosphopeptides than CAD (8,087 to 3,868), more frequently localizes the phosphorylation site to a specific residue (49.8% compared with 29.6%), and sequences whole classes of phosphopeptides previously unobserved.

Uniform resolution of compact identifiers for biomedical data

PubMed Central

Wimalaratne, Sarala M.; Juty, Nick; Kunze, John; Janée, Greg; McMurry, Julie A.; Beard, Niall; Jimenez, Rafael; Grethe, Jeffrey S.; Hermjakob, Henning; Martone, Maryann E.; Clark, Tim

2018-01-01

Most biomedical data repositories issue locally-unique accessions numbers, but do not provide globally unique, machine-resolvable, persistent identifiers for their datasets, as required by publishers wishing to implement data citation in accordance with widely accepted principles. Local accessions may however be prefixed with a namespace identifier, providing global uniqueness. Such “compact identifiers” have been widely used in biomedical informatics to support global resource identification with local identifier assignment. We report here on our project to provide robust support for machine-resolvable, persistent compact identifiers in biomedical data citation, by harmonizing the Identifiers.org and N2T.net (Name-To-Thing) meta-resolvers and extending their capabilities. Identifiers.org services hosted at the European Molecular Biology Laboratory - European Bioinformatics Institute (EMBL-EBI), and N2T.net services hosted at the California Digital Library (CDL), can now resolve any given identifier from over 600 source databases to its original source on the Web, using a common registry of prefix-based redirection rules. We believe these services will be of significant help to publishers and others implementing persistent, machine-resolvable citation of research data. PMID:29737976

Development of automated optical verification technologies for control systems

NASA Astrophysics Data System (ADS)

Volegov, Peter L.; Podgornov, Vladimir A.

1999-08-01

The report considers optical techniques for automated verification of object's identity designed for control system of nuclear objects. There are presented results of experimental researches and results of development of pattern recognition techniques carried out under the ISTC project number 772 with the purpose of identification of unique feature of surface structure of a controlled object and effects of its random treatment. Possibilities of industrial introduction of the developed technologies in frames of USA and Russia laboratories' lab-to-lab cooperation, including development of up-to-date systems for nuclear material control and accounting are examined.

Introduction: Nipah virus--discovery and origin.

PubMed

Chua, Kaw Bing

2012-01-01

Until the Nipah outbreak in Malaysia in 1999, knowledge of human infections with the henipaviruses was limited to the small number of cases associated with the emergence of Hendra virus in Australia in 1994. The Nipah outbreak in Malaysia alerted the global public health community to the severe pathogenic potential and widespread distribution of these unique paramyxoviruses. This chapter briefly describes the initial discovery of Nipah virus and the challenges encountered during the initial identification and characterisation of the aetiological agent responsible for the outbreak of febrile encephalitis. The initial attempts to isolate Nipah virus from the bat reservoir host are also described.

33 CFR 181.29 - Hull identification number display.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hull identification number... SECURITY (CONTINUED) BOATING SAFETY MANUFACTURER REQUIREMENTS Identification of Boats § 181.29 Hull identification number display. Two identical hull identification numbers are required to be displayed on each...

Identification and Characterization of Memecylon Species Using Isozyme Profiling

PubMed Central

Bharathi, T. R.; Sekhar, Shailasree; Geetha, N.; Niranjana, S. R.; Prakash, H. S.

2017-01-01

Background: The protein/isozyme fingerprint is useful in differentiating the species and acts as a biochemical marker for identification and systematic studies of medicinal plant species. Objective: In the present study, protein and isozyme profiles for peroxidase, esterase, acid phosphatase, polyphenol oxidase, alcohol dehydrogenase, and alkaline phosphatase of five species of Memecylon (Melastomataceae), Memecylon umbellatum, Memecylon edule, Memecylon talbotianum, Memecylon malabaricum, and Memecylon wightii were investigated. Materials and Methods: Fresh leaves were used to prepare crude enzyme extract for analyzing the five enzymes isozyme variations. Separation of isozymes was carried out using polyacrylamide gel electrophoresis (PAGE) and the banding patterns of protein were scored. Pair-wise comparisons of genotypes, based on the presence or absence of unique and shared polymorphic products, were used to regenerate similarity coefficients. The similarity coefficients were then used to construct dendrograms, using the unweighted pair group method with arithmetic averages. Results: A total of 50 bands with various Rf values and molecular weight were obtained through PAGE analysis. Among the five Memecylon species, more number of bands was produced in M. wightii and less number of bands was observed in M. edule. The results of similarity indices grouped M. malabaricum and M. wightii in one cluster with 98% similarity and M. umbellatum, M. edule, and M. talbotianum are grouped in another cluster with 79% similarity showing close genetic similarities which is in accordance with the morphological identification of Memecylon species. Conclusion: The protein/isozyme fingerprint is useful in differentiating the species and acts as a biochemical marker for identification of Memecylon species. SUMMARY Biochemical characterization of Memecylon species was evaluated by SDS-PAGE of extracted protein and isozyme profiling on native PAGE.After electrophoresis, each gel was stained with specific stains. Genetic distance relationships were evaluated based on the banding patterns of protein on isozymes.Unique banding pattern of esterase, peroxidase, acid phosphatase, alcohol dehydrogenase and polyphenol oxidase are observed in all the five species of Memecylon, which represent the fingerprint of Memecylon species.SDS-PAGE and isozyme profiling of five Memecylon species revealed that M. malabaricum and M. wightii grouped in one cluster and M. umbellatum, M. edule and M. talbotianum grouped in another cluster showing close genetic similarities which is in accordance with the morphological identification of Memecylon species.This is the first report on the comparison of protein and isozyme profile of five different Memecylon species. Abbreviations Used: SDS-PAGE: Sodium docecyl sulfate polyacrylamide gel electrophoresis; NTSYS PC2: Numerical taxonomy system, version 2.2 for Windows XP, Vista, Win7, Win 8 and Win10 including 64 bit PMID:29263637

33 CFR 181.25 - Hull identification number format.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hull identification number format... (CONTINUED) BOATING SAFETY MANUFACTURER REQUIREMENTS Identification of Boats § 181.25 Hull identification number format. Each of the hull identification numbers required by § 181.23 must consist of twelve...

9 CFR 55.25 - Animal identification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Database. The second animal identification must be unique for the individual animal within the herd and also must be linked to that animal and herd in the CWD National Database. (Approved by the Office of...

9 CFR 55.25 - Animal identification.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Database. The second animal identification must be unique for the individual animal within the herd and also must be linked to that animal and herd in the CWD National Database. (Approved by the Office of...

9 CFR 55.25 - Animal identification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Database. The second animal identification must be unique for the individual animal within the herd and also must be linked to that animal and herd in the CWD National Database. (Approved by the Office of...

Neutron-activation analysis applied to copper ores and artifacts

NASA Technical Reports Server (NTRS)

Linder, N. F.

1970-01-01

Neutron activation analysis is used for quantitative identification of trace metals in copper. Establishing a unique fingerprint of impurities in Michigan copper would enable identification of artifacts made from this copper.

Attendance fingerprint identification system using arduino and single board computer

NASA Astrophysics Data System (ADS)

Muchtar, M. A.; Seniman; Arisandi, D.; Hasanah, S.

2018-03-01

Fingerprint is one of the most unique parts of the human body that distinguishes one person from others and is easily accessed. This uniqueness is supported by technology that can automatically identify or recognize a person called fingerprint sensor. Yet, the existing Fingerprint Sensor can only do fingerprint identification on one machine. For the mentioned reason, we need a method to be able to recognize each user in a different fingerprint sensor. The purpose of this research is to build fingerprint sensor system for fingerprint data management to be centralized so identification can be done in each Fingerprint Sensor. The result of this research shows that by using Arduino and Raspberry Pi, data processing can be centralized so that fingerprint identification can be done in each fingerprint sensor with 98.5 % success rate of centralized server recording.

Department of Defense Logistics Roadmap 2008. Volume 1

DTIC Science & Technology

2008-07-01

machine readable identification mark on the Department’s tangible qualifying assets, and establishes the data management protocols needed to...uniquely identify items with a Unique Item Identifier (UII) via machine - readable information (MRI) marking represented by a two-dimensional data...property items with a machine -readable Unique Item Identifier (UII), which is a set of globally unique data elements. The UII is used in functional

Utility of the Montreal Assessment of Need Questionnaire for Community Mental Health Planning

PubMed Central

Tremblay, Jacques; Bamvita, Jean-Marie; Grenier, Guy; Fleury, Marie-Josée

2014-01-01

Abstract Needs assessment facilitates mental health services planning, provision, and evaluation. This study aimed to a) validate a new instrument, the Montreal Assessment of Needs Questionnaire (MANQ), and b) use this to assess variations and predictors of need (number and seriousness) in 297 individuals with severe mental disorders for 18 months, during implementation of the Quebec Mental Health Action Plan. MANQ internal and external validations were adequate. Variables significantly associated with need number and seriousness variations were used to build multiple linear regression models. Autonomous housing, not receiving welfare, not having consulted a health educator, higher level of help from services, Alcohol Use Disorders Identification Test total score, and social support were associated with decreasing need number and seriousness over time. Having a higher education was also associated with decreasing need number. In a reform context, the MANQ’s unique ability to detect rapid improvement in patient needs has usefulness for Quebec mental health planning. PMID:25099300

Privacy-protected biometric templates: acoustic ear identification

NASA Astrophysics Data System (ADS)

Tuyls, Pim T.; Verbitskiy, Evgeny; Ignatenko, Tanya; Schobben, Daniel; Akkermans, Ton H.

2004-08-01

Unique Biometric Identifiers offer a very convenient way for human identification and authentication. In contrast to passwords they have hence the advantage that they can not be forgotten or lost. In order to set-up a biometric identification/authentication system, reference data have to be stored in a central database. As biometric identifiers are unique for a human being, the derived templates comprise unique, sensitive and therefore private information about a person. This is why many people are reluctant to accept a system based on biometric identification. Consequently, the stored templates have to be handled with care and protected against misuse [1, 2, 3, 4, 5, 6]. It is clear that techniques from cryptography can be used to achieve privacy. However, as biometric data are noisy, and cryptographic functions are by construction very sensitive to small changes in their input, and hence one can not apply those crypto techniques straightforwardly. In this paper we show the feasibility of the techniques developed in [5], [6] by applying them to experimental biometric data. As biometric identifier we have choosen the shape of the inner ear-canal, which is obtained by measuring the headphone-to-ear-canal Transfer Functions (HpTFs) which are known to be person dependent [7].

The Miami Barrel: An Innovation in Forensic Firearms Identification

ERIC Educational Resources Information Center

Fadul, Thomas G., Jr.

2009-01-01

The scientific foundation in firearm and tool mark identification is that each firearm/tool produces a signature of identification (striation/impression) that is unique to that firearm/tool, and through examining the individual striations/impressions; the signature can be positively identified to the firearm/tool that produced it. There is no set…

19 CFR 192.2 - Requirements for exportation.

Code of Federal Regulations, 2012 CFR

2012-04-01

... documentation describing the vehicle, which includes the Vehicle Identification Number or, if the vehicle does not have a Vehicle Identification Number, the product identification number. Exportation of a vehicle... Identification Number (VIN), the name of the owner or lienholder of the leased vehicle, and the telephone numbers...

19 CFR 192.2 - Requirements for exportation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... documentation describing the vehicle, which includes the Vehicle Identification Number or, if the vehicle does not have a Vehicle Identification Number, the product identification number. Exportation of a vehicle... Identification Number (VIN), the name of the owner or lienholder of the leased vehicle, and the telephone numbers...

19 CFR 192.2 - Requirements for exportation.

Code of Federal Regulations, 2014 CFR

2014-04-01

... documentation describing the vehicle, which includes the Vehicle Identification Number or, if the vehicle does not have a Vehicle Identification Number, the product identification number. Exportation of a vehicle... Identification Number (VIN), the name of the owner or lienholder of the leased vehicle, and the telephone numbers...

27 CFR 19.242 - Employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... number. 19.242 Section 19.242 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... for Employer Identification Numbers § 19.242 Employer identification number. The proprietor must enter the employer identification number (EIN) assigned to it by the Internal Revenue Service on each form...

Maui-VIA: A User-Friendly Software for Visual Identification, Alignment, Correction, and Quantification of Gas Chromatography–Mass Spectrometry Data

PubMed Central

Kuich, P. Henning J. L.; Hoffmann, Nils; Kempa, Stefan

2015-01-01

A current bottleneck in GC–MS metabolomics is the processing of raw machine data into a final datamatrix that contains the quantities of identified metabolites in each sample. While there are many bioinformatics tools available to aid the initial steps of the process, their use requires both significant technical expertise and a subsequent manual validation of identifications and alignments if high data quality is desired. The manual validation is tedious and time consuming, becoming prohibitively so as sample numbers increase. We have, therefore, developed Maui-VIA, a solution based on a visual interface that allows experts and non-experts to simultaneously and quickly process, inspect, and correct large numbers of GC–MS samples. It allows for the visual inspection of identifications and alignments, facilitating a unique and, due to its visualization and keyboard shortcuts, very fast interaction with the data. Therefore, Maui-Via fills an important niche by (1) providing functionality that optimizes the component of data processing that is currently most labor intensive to save time and (2) lowering the threshold of expertise required to process GC–MS data. Maui-VIA projects are initiated with baseline-corrected raw data, peaklists, and a database of metabolite spectra and retention indices used for identification. It provides functionality for retention index calculation, a targeted library search, the visual annotation, alignment, correction interface, and metabolite quantification, as well as the export of the final datamatrix. The high quality of data produced by Maui-VIA is illustrated by its comparison to data attained manually by an expert using vendor software on a previously published dataset concerning the response of Chlamydomonas reinhardtii to salt stress. In conclusion, Maui-VIA provides the opportunity for fast, confident, and high-quality data processing validation of large numbers of GC–MS samples by non-experts. PMID:25654076

A distributed computational search strategy for the identification of diagnostics targets: application to finding aptamer targets for methicillin-resistant staphylococci.

PubMed

Flanagan, Keith; Cockell, Simon; Harwood, Colin; Hallinan, Jennifer; Nakjang, Sirintra; Lawry, Beth; Wipat, Anil

2014-06-30

The rapid and cost-effective identification of bacterial species is crucial, especially for clinical diagnosis and treatment. Peptide aptamers have been shown to be valuable for use as a component of novel, direct detection methods. These small peptides have a number of advantages over antibodies, including greater specificity and longer shelf life. These properties facilitate their use as the detector components of biosensor devices. However, the identification of suitable aptamer targets for particular groups of organisms is challenging. We present a semi-automated processing pipeline for the identification of candidate aptamer targets from whole bacterial genome sequences. The pipeline can be configured to search for protein sequence fragments that uniquely identify a set of strains of interest. The system is also capable of identifying additional organisms that may be of interest due to their possession of protein fragments in common with the initial set. Through the use of Cloud computing technology and distributed databases, our system is capable of scaling with the rapidly growing genome repositories, and consequently of keeping the resulting data sets up-to-date. The system described is also more generically applicable to the discovery of specific targets for other diagnostic approaches such as DNA probes, PCR primers and antibodies.

A distributed computational search strategy for the identification of diagnostics targets: Application to finding aptamer targets for methicillin-resistant staphylococci.

PubMed

Flanagan, Keith; Cockell, Simon; Harwood, Colin; Hallinan, Jennifer; Nakjang, Sirintra; Lawry, Beth; Wipat, Anil

2014-06-01

The rapid and cost-effective identification of bacterial species is crucial, especially for clinical diagnosis and treatment. Peptide aptamers have been shown to be valuable for use as a component of novel, direct detection methods. These small peptides have a number of advantages over antibodies, including greater specificity and longer shelf life. These properties facilitate their use as the detector components of biosensor devices. However, the identification of suitable aptamer targets for particular groups of organisms is challenging. We present a semi-automated processing pipeline for the identification of candidate aptamer targets from whole bacterial genome sequences. The pipeline can be configured to search for protein sequence fragments that uniquely identify a set of strains of interest. The system is also capable of identifying additional organisms that may be of interest due to their possession of protein fragments in common with the initial set. Through the use of Cloud computing technology and distributed databases, our system is capable of scaling with the rapidly growing genome repositories, and consequently of keeping the resulting data sets up-to-date. The system described is also more generically applicable to the discovery of specific targets for other diagnostic approaches such as DNA probes, PCR primers and antibodies.

Construction and identification of a D-Vine model applied to the probability distribution of modal parameters in structural dynamics

NASA Astrophysics Data System (ADS)

Dubreuil, S.; Salaün, M.; Rodriguez, E.; Petitjean, F.

2018-01-01

This study investigates the construction and identification of the probability distribution of random modal parameters (natural frequencies and effective parameters) in structural dynamics. As these parameters present various types of dependence structures, the retained approach is based on pair copula construction (PCC). A literature review leads us to choose a D-Vine model for the construction of modal parameters probability distributions. Identification of this model is based on likelihood maximization which makes it sensitive to the dimension of the distribution, namely the number of considered modes in our context. To this respect, a mode selection preprocessing step is proposed. It allows the selection of the relevant random modes for a given transfer function. The second point, addressed in this study, concerns the choice of the D-Vine model. Indeed, D-Vine model is not uniquely defined. Two strategies are proposed and compared. The first one is based on the context of the study whereas the second one is purely based on statistical considerations. Finally, the proposed approaches are numerically studied and compared with respect to their capabilities, first in the identification of the probability distribution of random modal parameters and second in the estimation of the 99 % quantiles of some transfer functions.

Fingerprint multicast in secure video streaming.

PubMed

Zhao, H Vicky; Liu, K J Ray

2006-01-01

Digital fingerprinting is an emerging technology to protect multimedia content from illegal redistribution, where each distributed copy is labeled with unique identification information. In video streaming, huge amount of data have to be transmitted to a large number of users under stringent latency constraints, so the bandwidth-efficient distribution of uniquely fingerprinted copies is crucial. This paper investigates the secure multicast of anticollusion fingerprinted video in streaming applications and analyzes their performance. We first propose a general fingerprint multicast scheme that can be used with most spread spectrum embedding-based multimedia fingerprinting systems. To further improve the bandwidth efficiency, we explore the special structure of the fingerprint design and propose a joint fingerprint design and distribution scheme. From our simulations, the two proposed schemes can reduce the bandwidth requirement by 48% to 87%, depending on the number of users, the characteristics of video sequences, and the network and computation constraints. We also show that under the constraint that all colluders have the same probability of detection, the embedded fingerprints in the two schemes have approximately the same collusion resistance. Finally, we propose a fingerprint drift compensation scheme to improve the quality of the reconstructed sequences at the decoder's side without introducing extra communication overhead.

The Quality Control of Data in a Clinical Database System—The Patient Identification Problem *

PubMed Central

Lai, J. Chi-Sang; Covvey, H.D.; Sevcik, K.C.; Wigle, E.D.

1981-01-01

Ensuring the accuracy of patient identification and the linkage of records with the appropriate patient owner is the first level of quality control of data in a clinical database system. Without a unique patient identifier, the fact that patient identity may be recorded at different places and times means that multiple identities may be associated with a given patient and new records associated with any of these identities. Even when a unique patient identifier is utilized, errors introduced in the data handling process can result in the same problems. The outcome is that the retrieval request for a given record may fail, or an erroneously identified record may be retrieved. We have studied each of the ways this fundamental problem occurs and propose a solution based on record linkage techniques to detect errors of this type. Specifically, we propose a patient identification scheme for the situation where no unique health identifier is available and detail a method to find patient records with erroneous identifiers.

7 CFR 75.48 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Identification number. 75.48 Section 75.48 Agriculture... number. The Director may require the use of official identification numbers in connection with seed certificated or sampled under the Act. When identification numbers are required, they shall be specified by the...

7 CFR 75.48 - Identification number.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Identification number. 75.48 Section 75.48 Agriculture... number. The Director may require the use of official identification numbers in connection with seed certificated or sampled under the Act. When identification numbers are required, they shall be specified by the...

16 CFR 301.26 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 301.26... numbers. (a) Registered numbers for use as the required identification in lieu of the name on fur product... (d) of this section. (b)(1) Registered identification numbers shall be used only by the person or...

7 CFR 75.48 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Identification number. 75.48 Section 75.48 Agriculture... number. The Director may require the use of official identification numbers in connection with seed certificated or sampled under the Act. When identification numbers are required, they shall be specified by the...

7 CFR 75.48 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Identification number. 75.48 Section 75.48 Agriculture... number. The Director may require the use of official identification numbers in connection with seed certificated or sampled under the Act. When identification numbers are required, they shall be specified by the...

7 CFR 75.48 - Identification number.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Identification number. 75.48 Section 75.48 Agriculture... number. The Director may require the use of official identification numbers in connection with seed certificated or sampled under the Act. When identification numbers are required, they shall be specified by the...

Biomarker Discovery Using New Metabolomics Software for Automated Processing of High Resolution LC-MS Data

PubMed Central

Hnatyshyn, S.; Reily, M.; Shipkova, P.; McClure, T.; Sanders, M.; Peake, D.

2011-01-01

Robust biomarkers of target engagement and efficacy are required in different stages of drug discovery. Liquid chromatography coupled to high resolution mass spectrometry provides sensitivity, accuracy and wide dynamic range required for identification of endogenous metabolites in biological matrices. LCMS is widely-used tool for biomarker identification and validation. Typical high resolution LCMS profiles from biological samples may contain greater than a million mass spectral peaks corresponding to several thousand endogenous metabolites. Reduction of the total number of peaks, component identification and statistical comparison across sample groups remains to be a difficult and time consuming challenge. Blood samples from four groups of rats (male vs. female, fully satiated and food deprived) were analyzed using high resolution accurate mass (HRAM) LCMS. All samples were separated using a 15 minute reversed-phase C18 LC gradient and analyzed in both positive and negative ion modes. Data was acquired using 15K resolution and 5ppm mass measurement accuracy. The entire data set was analyzed using software developed in collaboration between Bristol Meyers Squibb and Thermo Fisher Scientific to determine the metabolic effects of food deprivation on rats. Metabolomic LC-MS data files are extraordinarily complex and appropriate reduction of the number of spectral peaks via identification of related peaks and background removal is essential. A single component such as hippuric acid generates more than 20 related peaks including isotopic clusters, adducts and dimers. Plasma and urine may contain 500-1500 unique quantifiable metabolites. Noise filtering approaches including blank subtraction were used to reduce the number of irrelevant peaks. By grouping related signals such as isotopic peaks and alkali adducts, data processing was greatly simplified by reducing the total number of components by 10-fold. The software processes 48 samples in under 60minutes. Principle Component Analysis showed substantial differences in endogenous metabolites levels between the animal groups. Annotation of components was accomplished via searching the ChemSpider database. Tentative assignments made using accurate mass need further verification by comparison with the retention time of authentic standards.

Estimating spatial travel times using automatic vehicle identification data

DOT National Transportation Integrated Search

2001-01-01

Prepared ca. 2001. The paper describes an algorithm that was developed for estimating reliable and accurate average roadway link travel times using Automatic Vehicle Identification (AVI) data. The algorithm presented is unique in two aspects. First, ...

7 CFR 29.133 - Identification number.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Identification number. 29.133 Section 29.133... REGULATIONS TOBACCO INSPECTION Regulations Miscellaneous § 29.133 Identification number. The Director may require the use of official identification numbers in connection with tobacco certificated or sampled...

7 CFR 29.133 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Identification number. 29.133 Section 29.133... REGULATIONS TOBACCO INSPECTION Regulations Miscellaneous § 29.133 Identification number. The Director may require the use of official identification numbers in connection with tobacco certificated or sampled...

7 CFR 29.133 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Identification number. 29.133 Section 29.133... REGULATIONS TOBACCO INSPECTION Regulations Miscellaneous § 29.133 Identification number. The Director may require the use of official identification numbers in connection with tobacco certificated or sampled...

7 CFR 29.133 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Identification number. 29.133 Section 29.133... REGULATIONS TOBACCO INSPECTION Regulations Miscellaneous § 29.133 Identification number. The Director may require the use of official identification numbers in connection with tobacco certificated or sampled...

7 CFR 29.133 - Identification number.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Identification number. 29.133 Section 29.133... REGULATIONS TOBACCO INSPECTION Regulations Miscellaneous § 29.133 Identification number. The Director may require the use of official identification numbers in connection with tobacco certificated or sampled...

16 CFR 1633.11 - Records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... conditioning area before starting test, prototype or production identification number, and test data including.... For confirmation tests, the identification number must be that of the prototype tested. (2) Video and... prototype identification number or production lot identification number of the mattress set, date and time...

20 CFR 404.1220 - Identification numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Identification numbers. 404.1220 Section 404... § 404.1220 Identification numbers. (a) State and local governments. When a State submits a modification... will assign a special identification number to each political subdivision included in that modification...

20 CFR 404.1220 - Identification numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Identification numbers. 404.1220 Section 404... § 404.1220 Identification numbers. (a) State and local governments. When a State submits a modification... will assign a special identification number to each political subdivision included in that modification...

46 CFR 10.207 - Identification number.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Identification number. 10.207 Section 10.207 Shipping... CREDENTIAL General Requirements for All Merchant Mariner Credentials § 10.207 Identification number. For recordkeeping purposes only, a mariner's official MMC identification number is the individual's social security...

46 CFR 10.207 - Identification number.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Identification number. 10.207 Section 10.207 Shipping... CREDENTIAL General Requirements for All Merchant Mariner Credentials § 10.207 Identification number. For recordkeeping purposes only, a mariner's official MMC identification number is the individual's social security...

20 CFR 404.1220 - Identification numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Identification numbers. 404.1220 Section 404... § 404.1220 Identification numbers. (a) State and local governments. When a State submits a modification... will assign a special identification number to each political subdivision included in that modification...

20 CFR 404.1220 - Identification numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Identification numbers. 404.1220 Section 404... § 404.1220 Identification numbers. (a) State and local governments. When a State submits a modification... will assign a special identification number to each political subdivision included in that modification...

46 CFR 10.207 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Identification number. 10.207 Section 10.207 Shipping... CREDENTIAL General Requirements for All Merchant Mariner Credentials § 10.207 Identification number. For recordkeeping purposes only, a mariner's official MMC identification number is the individual's social security...

46 CFR 10.207 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Identification number. 10.207 Section 10.207 Shipping... CREDENTIAL General Requirements for All Merchant Mariner Credentials § 10.207 Identification number. For recordkeeping purposes only, a mariner's official MMC identification number is the individual's social security...

A Digital Hydrologic Network Supporting NAWQA MRB SPARROW Modeling--MRB_E2RF1WS

USGS Publications Warehouse

Brakebill, J.W.; Terziotti, S.E.

2011-01-01

A digital hydrologic network was developed to support SPAtially Referenced Regression on Watershed attributes (SPARROW) models within selected regions of the United States. These regions correspond with the U.S. Geological Survey's National Water Quality Assessment (NAWQA) Program Major River Basin (MRB) study units 2, 3, 4, 5, and 7 (Preston and others, 2009). MRB2, covers the South Atlantic-Gulf and Tennessee River basins. MRB3, covers the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins. MRB4, covers the Missouri River basins. MRB5, covers the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins. MRB7, covers the Pacific Northwest River basins. The digital hydrologic network described here represents surface-water pathways (MRB_E2RF1) and associated catchments (MRB_E2RF1WS). It serves as the fundamental framework to spatially reference and summarize explanatory information supporting nutrient SPARROW models (Brakebill and others, 2011; Wieczorek and LaMotte, 2011). The principal geospatial dataset used to support this regional effort was based on an enhanced version of a 1:500,000 scale digital stream-reach network (ERF1_2) (Nolan et al., 2002). Enhancements included associating over 3,500 water-quality monitoring sites to the reach network, improving physical locations of stream reaches at or near monitoring locations, and generating drainage catchments based on 100m elevation data. A unique number (MRB_ID) identifies each reach as a single unit. This unique number is also shared by the catchment area drained by the reach, thus spatially linking the hydrologically connected streams and the respective drainage area characteristics. In addition, other relevant physical, environmental, and monitoring information can be associated to the common network and accessed using the unique identification number.

A Digital Hydrologic Network Supporting NAWQA MRB SPARROW Modeling--MRB_E2RF1

USGS Publications Warehouse

Brakebill, J.W.; Terziotti, S.E.

2011-01-01

A digital hydrologic network was developed to support SPAtially Referenced Regression on Watershed attributes (SPARROW) models within selected regions of the United States. These regions correspond with the U.S. Geological Survey's National Water Quality Assessment (NAWQA) Program Major River Basin (MRB) study units 2, 3, 4, 5, and 7 (Preston and others, 2009). MRB2, covers the South Atlantic-Gulf and Tennessee River basins. MRB3, covers the Great Lakes, Ohio, Upper Mississippi, and Souris-Red-Rainy River basins. MRB4, covers the Missouri River basins. MRB5, covers the Lower Mississippi, Arkansas-White-Red, and Texas-Gulf River basins. MRB7, covers the Pacific Northwest River basins. The digital hydrologic network described here represents surface-water pathways (MRB_E2RF1) and associated catchments (MRB_E2RF1WS). It serves as the fundamental framework to spatially reference and summarize explanatory information supporting nutrient SPARROW models (Brakebill and others, 2011; Wieczorek and LaMotte, 2011). The principal geospatial dataset used to support this regional effort was based on an enhanced version of a 1:500,000 scale digital stream-reach network (ERF1_2) (Nolan et al., 2002). Enhancements included associating over 3,500 water-quality monitoring sites to the reach network, improving physical locations of stream reaches at or near monitoring locations, and generating drainage catchments based on 100m elevation data. A unique number (MRB_ID) identifies each reach as a single unit. This unique number is also shared by the catchment area drained by the reach, thus spatially linking the hydrologically connected streams and the respective drainage area characteristics. In addition, other relevant physical, environmental, and monitoring information can be associated to the common network and accessed using the unique identification number.

Putative and unique gene sequence utilization for the design of species specific probes as modeled by Lactobacillus plantarum

USDA-ARS?s Scientific Manuscript database

The concept of utilizing putative and unique gene sequences for the design of species specific probes was tested. The abundance profile of assigned functions within the Lactobacillus plantarum genome was used for the identification of the putative and unique gene sequence, csh. The targeted gene (cs...

Role of the dental team in mass fatality incidents.

PubMed

Fixott, R H; Arendt, D; Chrz, B; Filippi, J; McGivney, J; Warnick, A

2001-04-01

The process of dental identification for a mass fatality incident has unique aspects in comparison with that of a routine dental identification, outside of the obvious increase in the number of victims and responders. The dental team is a small part of a large effort to resolve the incident. Incident command structure applies to the dental team as a unit as well as to the entire organization of the response. Teamwork and planning are essential on all levels. Discussing the casework is limited to the public information officer; only the public information officer is authorized to talk to anyone outside the medical examiner's office. For the team, communication is essential between the team members and between the team and other morgue sections. Daily meetings not only update progress, but also identify and solve problems as they arise. Redundancy and cross-checking occur each step in each section. A core team of trained individuals provides a framework for the use of less experienced members. Use of a dental identification computer program is extremely beneficial, especially as the amount of fragmentation or number of victims increases. Because of the magnitude of the response, the physical and mental stresses require critical incident stress debriefing for all responders, regardless of their experience. The past and future service of the dental profession to the victims of mass fatality incidents and their families is an excellent example of the ideal of service on which the profession is based.

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 27 2013-07-01 2013-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 265.11 - Identification number.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 27 2013-07-01 2013-07-01 false Identification number. 265.11 Section... FACILITIES General Facility Standards § 265.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR...

49 CFR 172.338 - Replacement of identification numbers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Replacement of identification numbers. 172.338..., TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.338 Replacement of identification numbers. If more than one of the identification number markings on placards, orange panels, or white square-on-point...

40 CFR 265.11 - Identification number.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Identification number. 265.11 Section... FACILITIES General Facility Standards § 265.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR...

40 CFR 265.11 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Identification number. 265.11 Section... FACILITIES General Facility Standards § 265.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR...

49 CFR 172.338 - Replacement of identification numbers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Replacement of identification numbers. 172.338..., TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.338 Replacement of identification numbers. If more than one of the identification number markings on placards, orange panels, or white square-on-point...

49 CFR 172.338 - Replacement of identification numbers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Replacement of identification numbers. 172.338..., TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.338 Replacement of identification numbers. If more than one of the identification number markings on placards, orange panels, or white square-on-point...

40 CFR 265.11 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Identification number. 265.11 Section... FACILITIES General Facility Standards § 265.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR...

40 CFR 265.11 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Identification number. 265.11 Section... FACILITIES General Facility Standards § 265.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR...

A new approach to aid the characterisation and identification of metabolites of a model drug; partial isotope enrichment combined with novel formula elucidation software.

PubMed

Hobby, Kirsten; Gallagher, Richard T; Caldwell, Patrick; Wilson, Ian D

2009-01-01

This work describes the identification of 'isotopically enriched' metabolites of 4-cyanoaniline using the unique features of the software package 'Spectral Simplicity'. The software is capable of creating the theoretical mass spectra for partially isotope-enriched compounds, and subsequently performing an elemental composition analysis to give the elemental formula for the 'isotopically enriched' metabolite. A novel mass spectral correlation method, called 'FuzzyFit', was employed. 'FuzzyFit' utilises the expected experimental distribution of errors in both mass accuracy and isotope pattern and enables discrimination between statistically probable and improbable candidate formulae. The software correctly determined the molecular formulae of ten previously described metabolites of 4-cyanoaniline confirming the technique of partial isotope enrichment can produce results analogous to standard methodologies. Six previously unknown species were also identified, based on the presence of the unique 'designer' isotope ratio. Three of the unknowns were tentatively identified as N-acetylglutamine, O-methyl-N acetylglucuronide and a putative fatty acid conjugate. The discovery of a significant number of unknown species of a model drug with a comprehensive history of investigation highlights the potential for enhancement to the analytical process by the use of 'designer' isotope ratio compounds. The 'FuzzyFit' methodology significantly aided the elucidation of candidate formulae, by provision of a vastly simplified candidate formula data set. Copyright (c) 2008 John Wiley & Sons, Ltd.

Next-generation sequencing meets genetic diagnostics: development of a comprehensive workflow for the analysis of BRCA1 and BRCA2 genes

PubMed Central

Feliubadaló, Lídia; Lopez-Doriga, Adriana; Castellsagué, Ester; del Valle, Jesús; Menéndez, Mireia; Tornero, Eva; Montes, Eva; Cuesta, Raquel; Gómez, Carolina; Campos, Olga; Pineda, Marta; González, Sara; Moreno, Victor; Brunet, Joan; Blanco, Ignacio; Serra, Eduard; Capellá, Gabriel; Lázaro, Conxi

2013-01-01

Next-generation sequencing (NGS) is changing genetic diagnosis due to its huge sequencing capacity and cost-effectiveness. The aim of this study was to develop an NGS-based workflow for routine diagnostics for hereditary breast and ovarian cancer syndrome (HBOCS), to improve genetic testing for BRCA1 and BRCA2. A NGS-based workflow was designed using BRCA MASTR kit amplicon libraries followed by GS Junior pyrosequencing. Data analysis combined Variant Identification Pipeline freely available software and ad hoc R scripts, including a cascade of filters to generate coverage and variant calling reports. A BRCA homopolymer assay was performed in parallel. A research scheme was designed in two parts. A Training Set of 28 DNA samples containing 23 unique pathogenic mutations and 213 other variants (33 unique) was used. The workflow was validated in a set of 14 samples from HBOCS families in parallel with the current diagnostic workflow (Validation Set). The NGS-based workflow developed permitted the identification of all pathogenic mutations and genetic variants, including those located in or close to homopolymers. The use of NGS for detecting copy-number alterations was also investigated. The workflow meets the sensitivity and specificity requirements for the genetic diagnosis of HBOCS and improves on the cost-effectiveness of current approaches. PMID:23249957

Informatics Competencies for Nursing and Healthcare Leaders

PubMed Central

Westra, Bonnie L.; Delaney, Connie W.

2008-01-01

Historically, educational preparation did not address informatics competencies; thus managers, administrators, or executives may not be prepared to use or lead change in the use of health information technologies. A number of resources for informatics competencies exist, however, a comprehensive list addressing the unique knowledge and skills required in the role of a manager or administrator was not found. The purpose of this study was to develop informatics competencies for nursing leaders. A synthesis of the literature and a Delphi approach using three rounds of surveys with an expert panel resulted in identification of informatics competencies for nursing leaders that address computer skills, informatics knowledge, and informatics skills. PMID:18998803

Identification of a novel astrovirus in domestic sheep in Hungary.

PubMed

Reuter, Gábor; Pankovics, Péter; Delwart, Eric; Boros, Ákos

2012-02-01

The family Astroviridae consists of two genera, Avastrovirus and Mamastrovirus, whose members are associated with gastroenteritis in avian and mammalian hosts, respectively. We serendipitously identified a novel ovine astrovirus in a fecal specimen from a domestic sheep (Ovis aries) in Hungary by viral metagenomic analysis. Sequencing of the fragment indicated that it was an ORF1b/ORF2/3'UTR sequence, and it has been submitted to the GenBank database as ovine astrovirus type 2 (OAstV-2/Hungary/2009) with accession number JN592482. The unique sequence characteristics and the phylogenetic position of OAstV-2 suggest that genetically divergent lineages of astroviruses exist in sheep.

Assembly of 500,000 inter-specific catfish expressed sequence tags and large scale gene-associated marker development for whole genome association studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Catfish Genome Consortium; Wang, Shaolin; Peatman, Eric

2010-03-23

Background-Through the Community Sequencing Program, a catfish EST sequencing project was carried out through a collaboration between the catfish research community and the Department of Energy's Joint Genome Institute. Prior to this project, only a limited EST resource from catfish was available for the purpose of SNP identification. Results-A total of 438,321 quality ESTs were generated from 8 channel catfish (Ictalurus punctatus) and 4 blue catfish (Ictalurus furcatus) libraries, bringing the number of catfish ESTs to nearly 500,000. Assembly of all catfish ESTs resulted in 45,306 contigs and 66,272 singletons. Over 35percent of the unique sequences had significant similarities tomore » known genes, allowing the identification of 14,776 unique genes in catfish. Over 300,000 putative SNPs have been identified, of which approximately 48,000 are high-quality SNPs identified from contigs with at least four sequences and the minor allele presence of at least two sequences in the contig. The EST resource should be valuable for identification of microsatellites, genome annotation, large-scale expression analysis, and comparative genome analysis. Conclusions-This project generated a large EST resource for catfish that captured the majority of the catfish transcriptome. The parallel analysis of ESTs from two closely related Ictalurid catfishes should also provide powerful means for the evaluation of ancient and recent gene duplications, and for the development of high-density microarrays in catfish. The inter- and intra-specific SNPs identified from all catfish EST dataset assembly will greatly benefit the catfish introgression breeding program and whole genome association studies.« less

Sample Identification at Scale - Implementing IGSN in a Research Agency

NASA Astrophysics Data System (ADS)

Klump, J. F.; Golodoniuc, P.; Wyborn, L. A.; Devaraju, A.; Fraser, R.

2015-12-01

Earth sciences are largely observational and rely on natural samples, types of which vary significantly between science disciplines. Sharing and referencing of samples in scientific literature and across the Web requires the use of globally unique identifiers essential for disambiguation. This practice is very common in other fields, e.g. ISBN in publishing, doi in scientific literature, etc. In Earth sciences however, this is still often done in an ad-hoc manner without the use of unique identifiers. The International Geo Sample Number (IGSN) system provides a persistent, globally unique label for identifying environmental samples. As an IGSN allocating agency, CSIRO implements the IGSN registration service at the organisational scale with contributions from multiple research groups. Capricorn Distal Footprints project is one of the first pioneers and early adopters of the technology in Australia. For this project, IGSN provides a mechanism for identification of new and legacy samples, as well as derived sub-samples. It will ensure transparency and reproducibility in various geochemical sampling campaigns that will involve a diversity of sampling methods. Hence, diverse geochemical and isotopic results can be linked back to the parent sample, particularly where multiple children of that sample have also been analysed. The IGSN integration for this project is still in early stages and requires further consultations on the governance mechanisms that we need to put in place to allow efficient collaboration within CSIRO and collaborating partners on the project including naming conventions, service interfaces, etc. In this work, we present the results of the initial implementation of IGSN in the context of the Capricorn Distal Footprints project. This study has so far demonstrated the effectiveness of the proposed approach, while maintaining the flexibility to adapt to various media types, which is critical in the context of a multi-disciplinary project.

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 6 2013-10-01 2013-10-01 false Vehicle Identification Number Information D.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...) characters, of vehicle identification numbers reported in information on incidents involving death or injury...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 6 2011-10-01 2011-10-01 false Vehicle Identification Number Information D.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...) characters, of vehicle identification numbers reported in information on incidents involving death or injury...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 6 2014-10-01 2014-10-01 false Vehicle Identification Number Information D.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...) characters, of vehicle identification numbers reported in information on incidents involving death or injury...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 6 2012-10-01 2012-10-01 false Vehicle Identification Number Information D.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...) characters, of vehicle identification numbers reported in information on incidents involving death or injury...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

20 CFR 422.112 - Employer identification numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Employer identification numbers. 422.112... Procedures § 422.112 Employer identification numbers. (a) General. Most employers are required by section...)-1 to obtain an employer identification number (EIN) and to include it on wage reports filed with SSA...

20 CFR 422.112 - Employer identification numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Employer identification numbers. 422.112... Procedures § 422.112 Employer identification numbers. (a) General. Most employers are required by section...)-1 to obtain an employer identification number (EIN) and to include it on wage reports filed with SSA...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

33 CFR 181.23 - Hull identification numbers required.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Hull identification numbers... identification numbers required. (a) A manufacturer must identify each boat produced or imported with primary and secondary hull identification numbers permanently affixed in accordance with § 181.29 of this subpart. (b) A...

26 CFR 31.6011(b)-1 - Employers' identification numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 15 2013-04-01 2013-04-01 false Employers' identification numbers. 31.6011(b)-1... Subtitle F, Internal Revenue Code of 1954) § 31.6011(b)-1 Employers' identification numbers. (a... Insurance Contributions Act, but who prior to such day neither has been assigned an identification number...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 27 2013-07-01 2013-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

33 CFR 181.23 - Hull identification numbers required.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Hull identification numbers... identification numbers required. (a) A manufacturer must identify each boat produced or imported with primary and secondary hull identification numbers permanently affixed in accordance with § 181.29 of this subpart. (b) A...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

26 CFR 31.6011(b)-1 - Employers' identification numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 15 2014-04-01 2014-04-01 false Employers' identification numbers. 31.6011(b)-1... Subtitle F, Internal Revenue Code of 1954) § 31.6011(b)-1 Employers' identification numbers. (a... Insurance Contributions Act, but who prior to such day neither has been assigned an identification number...

Comprehensive analysis of proteins of pH fractionated samples using monolithic LC/MS/MS, intact MW measurement and MALDI-QIT-TOF MS

PubMed Central

Yoo, Chul; Patwa, Tasneem H.; Kreunin, Paweena; Miller, Fred R.; Huber, Christian G.; Nesvizhskii, Alexey I.; Lubman, David M.

2012-01-01

A comprehensive platform that integrates information from the protein and peptide levels by combining various MS techniques has been employed for the analysis of proteins in fully malignant human breast cancer cells. The cell lysates were subjected to chromatofocusing fractionation, followed by tryptic digestion of pH fractions for on-line monolithic RP-HPLC interfaced with linear ion trap MS analysis for rapid protein identification. This unique approach of direct analysis of pH fractions resulted in the identification of large numbers of proteins from several selected pH fractions, in which approximately 1.5 μg of each of the pH fraction digests was consumed for an analysis time of ca 50 min. In order to combine valuable information retained at the protein level with the protein identifications obtained from the peptide level information, the same pH fraction was analyzed using nonporous (NPS)-RP-HPLC/ESI-TOF MS to obtain intact protein MW measurements. In order to further validate the protein identification procedures from the fraction digest analysis, NPS-RP-HPLC separation was performed for off-line protein collection to closely examine each protein using MALDI-TOF MS and MALDI-quadrupole ion trap (QIT)-TOF MS, and excellent agreement of protein identifications was consistently observed. It was also observed that the comparison to intact MW and other MS information was particularly useful for analyzing proteins whose identifications were suggested by one sequenced peptide from fraction digest analysis. PMID:17206599

47 CFR 2.954 - Identification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Identification. 2.954 Section 2.954 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND RADIO TREATY MATTERS; GENERAL... subject only to verification shall be uniquely identified by the person responsible for marketing or...

47 CFR 2.954 - Identification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 1 2011-10-01 2011-10-01 false Identification. 2.954 Section 2.954 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND RADIO TREATY MATTERS; GENERAL... subject only to verification shall be uniquely identified by the person responsible for marketing or...

14 CFR 47.15 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGISTRATION General § 47.15 Identification number. (a) Number required. An applicant for Aircraft Registration must place a U.S. identification number (registration mark) on his Aircraft Registration Application... holder of a Dealer's Aircraft Registration Certificate who applies for a temporary registration number...

Identification of propulsion systems

NASA Technical Reports Server (NTRS)

Merrill, Walter; Guo, Ten-Huei; Duyar, Ahmet

1991-01-01

This paper presents a tutorial on the use of model identification techniques for the identification of propulsion system models. These models are important for control design, simulation, parameter estimation, and fault detection. Propulsion system identification is defined in the context of the classical description of identification as a four step process that is unique because of special considerations of data and error sources. Propulsion system models are described along with the dependence of system operation on the environment. Propulsion system simulation approaches are discussed as well as approaches to propulsion system identification with examples for both air breathing and rocket systems.

Methods of identification employing antibody profiles

DOEpatents

Francoeur, Ann-Michele

1993-12-14

An identification method, applicable to the identification of animals or inanimate objects, is described. The method takes advantage of the set of individual-specific antibodies that are part of the unique antibody repertoire present in animals, by reacting an effective amount of such antibodies with a particular panel, of n-dimensional array (where n is typically one or two) consisting of an effective amount of many different antigens (typically greater than one thousand), to give antibody-antigen complexes. The profile or pattern formed by the antigen-antibody complexes, termed an antibody fingerprint, when revealed by an effective amount of an appropriate detector molecule, is uniquely representative of a particular individual. The method can similarly be used to distinguish genetically, or otherwise similar individuals, or their body parts containing individual-specific antibodies.

Pharmacologic modulation of protein kinase C isozymes: the role of RACKs and subcellular localisation.

PubMed

Csukai, M; Mochly-Rosen, D

1999-04-01

Protein kinase C (PKC) isozymes are highly homologous kinases and several different isozymes can be present in a cell. Each isozyme is likely to mediate unique functions, but pharmacological tools to explore their isozyme-specific roles have not been available until recently. In this review, we describe the development and application of isozyme-selective inhibitors of PKC. The identification of these inhibitors stems from the observation that PKC isozymes are each localised to unique subcellular locations following activation. Inhibitors of this isozyme-unique localisation have been shown to act as selective inhibitors of the functions of individual isozymes. The identification of isozyme-specific inhibitors should allow the exploration of individual PKC isozyme function in a wide range of cell systems. Copyright 1999 The Italian Pharmacological Society.

Identification of the first diphenyl ether gene cluster for pestheic acid biosynthesis in plant endophyte Pestalotiopsis fici.

PubMed

Xu, Xinxin; Liu, Ling; Zhang, Fan; Wang, Wenzhao; Li, Jinyang; Guo, Liangdong; Che, Yongsheng; Liu, Gang

2014-01-24

The diphenyl ether pestheic acid was isolated from the endophytic fungus Pestalotiopsis fici, which is proposed to be the biosynthetic precursor of the unique chloropupukeananes. The pestheic acid biosynthetic gene (pta) cluster was identified in the fungus through genome scanning. Sequence analysis revealed that this gene cluster encodes a nonreducing polyketide synthase, a number of modification enzymes, and three regulators. Gene disruption and intermediate analysis demonstrated that the biosynthesis proceeded through formation of the polyketide backbone, cyclization of a polyketo acid to a benzophenone, chlorination, and formation of the diphenyl ether skeleton through oxidation and hydrolyzation. A dihydrogeodin oxidase gene, ptaE, was essential for diphenyl ether formation, and ptaM encoded a flavin-dependent halogenase catalyzing chlorination in the biosynthesis. Identification of the pta cluster laid the foundation to decipher the genetic and biochemical mechanisms involved in the pathway. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A system for household enumeration and re-identification in densely populated slums to facilitate community research, education, and advocacy.

PubMed

Thomson, Dana R; Shitole, Shrutika; Shitole, Tejal; Sawant, Kiran; Subbaraman, Ramnath; Bloom, David E; Patil-Deshmukh, Anita

2014-01-01

We devised and implemented an innovative Location-Based Household Coding System (LBHCS) appropriate to a densely populated informal settlement in Mumbai, India. LBHCS codes were designed to double as unique household identifiers and as walking directions; when an entire community is enumerated, LBHCS codes can be used to identify the number of households located per road (or lane) segment. LBHCS was used in community-wide biometric, mental health, diarrheal disease, and water poverty studies. It also facilitated targeted health interventions by a research team of youth from Mumbai, including intensive door-to-door education of residents, targeted follow-up meetings, and a full census. In addition, LBHCS permitted rapid and low-cost preparation of GIS mapping of all households in the slum, and spatial summation and spatial analysis of survey data. LBHCS was an effective, easy-to-use, affordable approach to household enumeration and re-identification in a densely populated informal settlement where alternative satellite imagery and GPS technologies could not be used.

Analysis and automatic identification of sleep stages using higher order spectra.

PubMed

Acharya, U Rajendra; Chua, Eric Chern-Pin; Chua, Kuang Chua; Min, Lim Choo; Tamura, Toshiyo

2010-12-01

Electroencephalogram (EEG) signals are widely used to study the activity of the brain, such as to determine sleep stages. These EEG signals are nonlinear and non-stationary in nature. It is difficult to perform sleep staging by visual interpretation and linear techniques. Thus, we use a nonlinear technique, higher order spectra (HOS), to extract hidden information in the sleep EEG signal. In this study, unique bispectrum and bicoherence plots for various sleep stages were proposed. These can be used as visual aid for various diagnostics application. A number of HOS based features were extracted from these plots during the various sleep stages (Wakefulness, Rapid Eye Movement (REM), Stage 1-4 Non-REM) and they were found to be statistically significant with p-value lower than 0.001 using ANOVA test. These features were fed to a Gaussian mixture model (GMM) classifier for automatic identification. Our results indicate that the proposed system is able to identify sleep stages with an accuracy of 88.7%.

Prediction of B-cell linear epitopes with a combination of support vector machine classification and amino acid propensity identification.

PubMed

Wang, Hsin-Wei; Lin, Ya-Chi; Pai, Tun-Wen; Chang, Hao-Teng

2011-01-01

Epitopes are antigenic determinants that are useful because they induce B-cell antibody production and stimulate T-cell activation. Bioinformatics can enable rapid, efficient prediction of potential epitopes. Here, we designed a novel B-cell linear epitope prediction system called LEPS, Linear Epitope Prediction by Propensities and Support Vector Machine, that combined physico-chemical propensity identification and support vector machine (SVM) classification. We tested the LEPS on four datasets: AntiJen, HIV, a newly generated PC, and AHP, a combination of these three datasets. Peptides with globally or locally high physicochemical propensities were first identified as primitive linear epitope (LE) candidates. Then, candidates were classified with the SVM based on the unique features of amino acid segments. This reduced the number of predicted epitopes and enhanced the positive prediction value (PPV). Compared to four other well-known LE prediction systems, the LEPS achieved the highest accuracy (72.52%), specificity (84.22%), PPV (32.07%), and Matthews' correlation coefficient (10.36%).

Transponders as permanent identification markers for domestic ferrets, black-footed ferrets, and other wildlife

USGS Publications Warehouse

Fagerstone, Kathleen A.; Johns, Brad E.

1987-01-01

A 0.05-g transponder implanted subcutaneously was tested to see if it provided a reliable identification method. In laboratory tests 20 domestic ferrets (Mustela putorius furo) received transponders and were monitored for a minimum of 6 months. None showed signs of inflammation, and necropsies conducted at the end of the study showed no scar tissue or transponder migration. Seven of 23 transponders failed during the test because of leakage through the plastic case, and a glass case is now being manufactured that does not have the leakage problem. During mark-recapture studies in September and October 1985, transponders were implanted in 20 black-footed ferrets (M. nigripes), 11 of which were subsequently recaptured and 9 of which were brought into captivity; none showed signs of inflammation. Transponders provide a reliable new method for identifying hard-to-mark wildlife with a unique, permanent number than can be read with the animal in-hand or by remote equipment.

The search for a hippocampal engram.

PubMed

Mayford, Mark

2014-01-05

Understanding the molecular and cellular changes that underlie memory, the engram, requires the identification, isolation and manipulation of the neurons involved. This presents a major difficulty for complex forms of memory, for example hippocampus-dependent declarative memory, where the participating neurons are likely to be sparse, anatomically distributed and unique to each individual brain and learning event. In this paper, I discuss several new approaches to this problem. In vivo calcium imaging techniques provide a means of assessing the activity patterns of large numbers of neurons over long periods of time with precise anatomical identification. This provides important insight into how the brain represents complex information and how this is altered with learning. The development of techniques for the genetic modification of neural ensembles based on their natural, sensory-evoked, activity along with optogenetics allows direct tests of the coding function of these ensembles. These approaches provide a new methodological framework in which to examine the mechanisms of complex forms of learning at the level of the neurons involved in a specific memory.

The search for a hippocampal engram

PubMed Central

Mayford, Mark

2014-01-01

Understanding the molecular and cellular changes that underlie memory, the engram, requires the identification, isolation and manipulation of the neurons involved. This presents a major difficulty for complex forms of memory, for example hippocampus-dependent declarative memory, where the participating neurons are likely to be sparse, anatomically distributed and unique to each individual brain and learning event. In this paper, I discuss several new approaches to this problem. In vivo calcium imaging techniques provide a means of assessing the activity patterns of large numbers of neurons over long periods of time with precise anatomical identification. This provides important insight into how the brain represents complex information and how this is altered with learning. The development of techniques for the genetic modification of neural ensembles based on their natural, sensory-evoked, activity along with optogenetics allows direct tests of the coding function of these ensembles. These approaches provide a new methodological framework in which to examine the mechanisms of complex forms of learning at the level of the neurons involved in a specific memory. PMID:24298162

Consanguinity in Saudi Arabia: a unique opportunity for pediatric kidney research.

PubMed

Kari, Jameela A; Bockenhauer, Detlef; Stanescu, Horia; Gari, Mamdooh; Kleta, Robert; Singh, Ajay K

2014-02-01

Identification of disease-related genes is a critical step in understanding the molecular basis of disease and developing targeted therapies. The genetic study of diseases occurring in the offspring of consanguineous unions is a powerful way to discover new disease genes. Pediatric nephrology provides an excellent example because ∼70% of cases of kidney disease in childhood are congenital with a likely genetic basis. This percentage is likely to be even higher in countries with a high consanguinity rate, such as the Kingdom of Saudi Arabia. However, there are a number of challenges, such as cultural, legal, and religious restrictions, that should be appreciated before carrying out genetic research in a tradition-bound country. In this article, we discuss the background, opportunities, and challenges involved with this unique opportunity to conduct studies of such genetic disorders. Keys to success include collaboration and an understanding of local traditions and laws. Copyright © 2014 National Kidney Foundation, Inc. All rights reserved.

Human embryonic stem cell phosphoproteome revealed by electron transfer dissociation tandem mass spectrometry

PubMed Central

Swaney, Danielle L.; Wenger, Craig D.; Thomson, James A.; Coon, Joshua J.

2009-01-01

Protein phosphorylation is central to the understanding of cellular signaling, and cellular signaling is suggested to play a major role in the regulation of human embryonic stem (ES) cell pluripotency. Here, we describe the use of conventional tandem mass spectrometry-based sequencing technology—collision-activated dissociation (CAD)—and the more recently developed method electron transfer dissociation (ETD) to characterize the human ES cell phosphoproteome. In total, these experiments resulted in the identification of 11,995 unique phosphopeptides, corresponding to 10,844 nonredundant phosphorylation sites, at a 1% false discovery rate (FDR). Among these phosphorylation sites are 5 localized to 2 pluripotency critical transcription factors—OCT4 and SOX2. From these experiments, we conclude that ETD identifies a larger number of unique phosphopeptides than CAD (8,087 to 3,868), more frequently localizes the phosphorylation site to a specific residue (49.8% compared with 29.6%), and sequences whole classes of phosphopeptides previously unobserved. PMID:19144917

Genomic identification of potential targets unique to Candida albicans for the discovery of antifungal agents.

PubMed

Tripathi, Himanshu; Luqman, Suaib; Meena, Abha; Khan, Feroz

2014-01-01

Despite of modern antifungal therapy, the mortality rates of invasive infection with human fungal pathogen Candida albicans are up to 40%. Studies suggest that drug resistance in the three most common species of human fungal pathogens viz., C. albicans, Aspergillus fumigatus (causing mortality rate up to 90%) and Cryptococcus neoformans (causing mortality rate up to 70%) is due to mutations in the target enzymes or high expression of drug transporter genes. Drug resistance in human fungal pathogens has led to an imperative need for the identification of new targets unique to fungal pathogens. In the present study, we have used a comparative genomics approach to find out potential target proteins unique to C. albicans, an opportunistic fungus responsible for severe infection in immune-compromised human. Interestingly, many target proteins of existing antifungal agents showed orthologs in human cells. To identify unique proteins, we have compared proteome of C. albicans [SC5314] i.e., 14,633 total proteins retrieved from the RefSeq database of NCBI, USA with proteome of human and non-pathogenic yeast Saccharomyces cerevisiae. Results showed that 4,568 proteins were identified unique to C. albicans as compared to those of human and later when these unique proteins were compared with S. cerevisiae proteome, finally 2,161 proteins were identified as unique proteins and after removing repeats total 1,618 unique proteins (42 functionally known, 1,566 hypothetical and 10 unknown) were selected as potential antifungal drug targets unique to C. albicans.

33 CFR 181.23 - Hull identification numbers required.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hull identification numbers... SECURITY (CONTINUED) BOATING SAFETY MANUFACTURER REQUIREMENTS Identification of Boats § 181.23 Hull... identify each boat produced or imported with two hull identification numbers that meet the requirements of...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

Robust polygon recognition method with similarity invariants applied to star identification

NASA Astrophysics Data System (ADS)

Hernández, E. Antonio; Alonso, Miguel A.; Chávez, Edgar; Covarrubias, David H.; Conte, Roberto

2017-02-01

In the star identification process the goal is to recognize a star by using the celestial bodies in its vicinity as context. An additional requirement is to avoid having to perform an exhaustive scan of the star database. In this paper we present a novel approach to star identification using similarity invariants. More specifically, the proposed algorithm defines a polygon for each star, using the neighboring celestial bodies in the field of view as vertices. The mapping is insensitive to similarity transformation; that is, the image of the polygon under the transformation is not affected by rotation, scaling or translations. Each polygon is associated with an essentially unique complex number. We perform an exhaustive experimental validation of the proposed algorithm using synthetic data generated from the star catalog with uniformly-distributed positional noise introduced to each star. The star identification method that we present is proven to be robust, achieving a recognition rate of 99.68% when noise levels of up to ± 424 μ radians are introduced to the location of the stars. In our tests the proposed algorithm proves that if a polygon match is found, it always corresponds to the star under analysis; no mismatches are found. In its present form our method cannot identify polygons in cases where there exist missing or false stars in the analyzed images, in those situations it only indicates that no match was found.

Early Identification of Reading Comprehension Difficulties

ERIC Educational Resources Information Center

Catts, Hugh W.; Nielsen, Diane Corcoran; Bridges, Mindy Sittner; Liu, Yi-Syuan

2016-01-01

Most research on early identification of reading disabilities has focused on word reading problems and little attention has been given to reading comprehension difficulties. In this study, we investigated whether measures of language ability and/or response to language intervention in kindergarten uniquely predicted reading comprehension…

48 CFR 252.211-7003 - Item identification and valuation.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., used to retrieve data encoded on machine-readable media. Concatenated unique item identifier means— (1... (or controlling) authority for the enterprise identifier. Item means a single hardware article or a...-readable means an automatic identification technology media, such as bar codes, contact memory buttons...

48 CFR 252.211-7003 - Item identification and valuation.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., used to retrieve data encoded on machine-readable media. Concatenated unique item identifier means— (1... (or controlling) authority for the enterprise identifier. Item means a single hardware article or a...-readable means an automatic identification technology media, such as bar codes, contact memory buttons...

48 CFR 252.211-7003 - Item identification and valuation.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., used to retrieve data encoded on machine-readable media. Concatenated unique item identifier means— (1... (or controlling) authority for the enterprise identifier. Item means a single hardware article or a...-readable means an automatic identification technology media, such as bar codes, contact memory buttons...

77 FR 40735 - Unique Device Identification System

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

... Identification System AGENCY: Food and Drug Administration, HHS. ACTION: Proposed rule. SUMMARY: The Food and... Regulatory Action This rule is intended to substantially reduce existing obstacles to the adequate... appropriate, better-focused, corrective action. The rule will also require dates on medical device labels to...

Rapid molecular identification and characteristics of Lactobacillus strains.

PubMed

Markiewicz, L H; Biedrzycka, E; Wasilewska, E; Bielecka, M

2010-09-01

Eleven type strains and 24 Lactobacillus isolates, preliminarily classified to the species due to phenotypic features, were investigated. Standard methods of identification with species-specific PCRs and typing with PFGE (with ApaI, NotI and SmaI restriction enzymes) allowed us to distinguish 16 unique strains belonging to 5 species (L. acidophilus, L. delbrueckii ssp. bulgaricus, L. plantarum, L. rhamnosus, L. salivarius). Alternative approach with 16S-23S rDNA ARDRA identification (with merely two restrictases, BsuRI and TaqI) and PCR-based typing (RAPD with two random- and rep-PCR with (GTG)(5) primers) showed to be more discriminative, i.e. 21 unique strains were classified in the same species as above. As a result, 7 out of 24 phenotypically species-assigned isolates were reclassified. The alternative procedure of rapid identification and typing of Lactobacillus isolates appeared to be equally effective and shortened from 1 week to 2-3 d (in comparison to the standard methods).

Tongue prints: A novel biometric and potential forensic tool.

PubMed

Radhika, T; Jeddy, Nadeem; Nithya, S

2016-01-01

Tongue is a vital internal organ well encased within the oral cavity and protected from the environment. It has unique features which differ from individual to individual and even between identical twins. The color, shape, and surface features are characteristic of every individual, and this serves as a tool for identification. Many modes of biometric systems have come into existence such as fingerprint, iris scan, skin color, signature verification, voice recognition, and face recognition. The search for a new personal identification method secure has led to the use of the lingual impression or the tongue print as a method of biometric authentication. Tongue characteristics exhibit sexual dimorphism thus aiding in the identification of the person. Emerging as a novel biometric tool, tongue prints also hold the promise of a potential forensic tool. This review highlights the uniqueness of tongue prints and its superiority over other biometric identification systems. The various methods of tongue print collection and the classification of tongue features are also elucidated.

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

27 CFR 40.359 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... number. 40.359 Section 40.359 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... identification number. The employer identification number (EIN) (defined at 26 CFR 301.7701-12) of a manufacturer of cigarette papers and/or tubes who has been assigned such a number shall be shown on each...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

19 CFR 24.5 - Filing identification number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing identification number. 24.5 Section 24.5... TREASURY CUSTOMS FINANCIAL AND ACCOUNTING PROCEDURE § 24.5 Filing identification number. (a) Generally..., Notification of Importer's Number or Application for Importer's Number, or Notice of Change of Name or Address...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

19 CFR 24.5 - Filing identification number.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Filing identification number. 24.5 Section 24.5... TREASURY CUSTOMS FINANCIAL AND ACCOUNTING PROCEDURE § 24.5 Filing identification number. (a) Generally..., Notification of Importer's Number or Application for Importer's Number, or Notice of Change of Name or Address...

27 CFR 46.102 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... number. 46.102 Section 46.102 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE....102 Employer identification number. (a) Requirement. The employer identification number (as defined in 26 CFR 301.7701-12) of the taxpayer who has been assigned such a number must be shown on each special...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

27 CFR 31.115 - Employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... number. 31.115 Section 31.115 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE....115 Employer identification number. (a) Requirement. The employer identification number (as defined in 26 CFR 301.7701-12) of a dealer who has been assigned such a number must be shown on each...

19 CFR 24.5 - Filing identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Filing identification number. 24.5 Section 24.5... TREASURY CUSTOMS FINANCIAL AND ACCOUNTING PROCEDURE § 24.5 Filing identification number. (a) Generally..., Notification of Importer's Number or Application for Importer's Number, or Notice of Change of Name or Address...

The Geoscience Internet of Things

NASA Astrophysics Data System (ADS)

Lehnert, K.; Klump, J.

2012-04-01

Internet of Things is a term that refers to "uniquely identifiable objects (things) and their virtual representations in an Internet-like structure" (Wikipedia). We here use the term to describe new and innovative ways to integrate physical samples in the Earth Sciences into the emerging digital infrastructures that are developed to support research and education in the Geosciences. Many Earth Science data are acquired on solid earth samples through observations and experiments conducted in the field or in the lab. The application and long-term utility of sample-based data for science is critically dependent on (a) the availability of information (metadata) about the samples such as geographical location where the sample was collected, time of sampling, sampling method, etc. (b) links between the different data types available for individual samples that are dispersed in the literature and in digital data repositories, and (c) access to the samples themselves. Neither of these requirements could be achieved in the past due to incomplete documentation of samples in publications, use of ambiguous sample names, and the lack of a central catalog that allows researchers to find a sample's archiving location. New internet-based capabilities have been developed over the past few years for the registration and unique identification of samples that make it possible to overcome these problems. Services for the registration and unique identification of samples are provided by the System for Earth Sample Registration SESAR (www.geosamples.org). SESAR developed the International Geo Sample Number, or IGSN, as a unique identifier for samples and specimens collected from our natural environment. Since December 2011, the IGSN is governed by an international organization, the IGSN eV (www.igsn.org), which endorses and promotes an internationally unified approach for registration and discovery of physical specimens in the Geoscience community and is establishing a new modular and scalable architecture for the IGSN to advance global implementation. Use of the IGSN will, for the first time, allow to establish links between samples (or the digital representation of them), data acquired on these samples, and the publications that report these data. Samples can be linked to a dataset by including IGSNs in the metadata record of a dataset's DOI® when the dataset is registered with the DOI® system for unique identification. Links between datasets and publications already have been implemented based on dataset DOIs® between some Geoscience journals and data centers that are Publication Agents in the DataCite consortium (www.datacite.org). Links between IGSNs, dataset DOIs, and publication DOIs will in the future allow researchers to find and access with a single query and without ambiguity all data acquired on a specific sample across the entire literature.

Detecting Periprocedural Myocardial Infarction in Contemporary Percutaneous Coronary Intervention Trials.

PubMed

Spitzer, Ernest; de Vries, Ton; Cavalcante, Rafael; Tuinman, Marieke; Rademaker-Havinga, Tessa; Alkema, Maaike; Morel, Marie-Angele; Soliman, Osama I; Onuma, Yoshinobu; van Es, Gerrit-Anne; Tijssen, Jan G P; McFadden, Eugene; Serruys, Patrick W

2017-04-10

This study sought to investigate the differences in detecting (e.g., triggering) periprocedural myocardial infarction (PMI) among 3 current definitions. PMI is a frequent component of primary endpoints in coronary device trials. Identification of all potential suspected events is critical for accurate event ascertainment. Automatic triggers based on study databases prevent underreporting of events. We generated automated algorithms to trigger PMI based on each definition and compared results using data from the RESOLUTE all comers trial. The operationalization of current PMI definitions was achieved by defining programmable algorithms used to interrogate the study database. From a total of 636 PMI triggers, we identified 234 for the World Health Organization extended definition, 382 for the Third Universal definition, and 216 for the Society for Cardiovascular Angiography and Interventions definition. Differences among the biomarkers used, different cutoff values, and in the hierarchy among biomarkers within definitions, yielded a different number of triggers, and identified unique triggers for each definition. Only 38 triggers were consistently identified by all definitions. Availability of ECG data, eCRF data on clinical presentation, and the reporting of >2 post-procedural values of the same biomarker influenced considerably the number of PMI triggers identified. PMI definitions are not interchangeable. The number of triggers identified and consequently the potential number of events varies significantly, highlighting the importance of rigorous methodology when PMI is a component of a powered endpoint. Emphasis on collection of biomarkers, ECG data, and clinical status at baseline may improve the correct identification of PMI triggers. Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

40 CFR 86.079-36 - Submission of vehicle identification numbers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Submission of vehicle identification... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light...

40 CFR 86.079-36 - Submission of vehicle identification numbers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Submission of vehicle identification... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light...

40 CFR 86.079-36 - Submission of vehicle identification numbers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Submission of vehicle identification... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light...

40 CFR 86.079-36 - Submission of vehicle identification numbers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Submission of vehicle identification... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light...

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

Heteroduplex analysis can increase the informativeness of PCR-amplified VNTR markers: Application using a marker tightly linked to the COL2A1 gene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkin, D.J.; Cohn, D.H.; Koprivnikar, K.E.

1993-02-01

Variable number of tandem repeat (VNTR) polymorphism provide a high degree of informativeness in linkage studies. Whether performed by standard methods or by polymerase chain reaction (PCR), analysis of these markers involves assessment of the length of each allele. VNTR alleles usually differ in the number of tandem repeats. During PCR amplification of a VNTR closely linked to the type II collagen gene (COL2A1), we identified allelic microheterogeneity through the analysis of unique heteroduplexes between amplified strands of the two alleles. In one large pedigree, heteroduplex analysis identified only three distinct alleles. The identification of these heteroduplexes allowed the determinationmore » of the COL2A1 inheritance pattern in the family, which otherwise would have been noninformative. 26 refs., 3 figs.« less

Extending ALE3D, an Arbitrarily Connected hexahedral 3D Code, to Very Large Problem Size (U)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichols, A L

2010-12-15

As the number of compute units increases on the ASC computers, the prospect of running previously unimaginably large problems is becoming a reality. In an arbitrarily connected 3D finite element code, like ALE3D, one must provide a unique identification number for every node, element, face, and edge. This is required for a number of reasons, including defining the global connectivity array required for domain decomposition, identifying appropriate communication patterns after domain decomposition, and determining the appropriate load locations for implicit solvers, for example. In most codes, the unique identification number is defined as a 32-bit integer. Thus the maximum valuemore » available is 231, or roughly 2.1 billion. For a 3D geometry consisting of arbitrarily connected hexahedral elements, there are approximately 3 faces for every element, and 3 edges for every node. Since the nodes and faces need id numbers, using 32-bit integers puts a hard limit on the number of elements in a problem at roughly 700 million. The first solution to this problem would be to replace 32-bit signed integers with 32-bit unsigned integers. This would increase the maximum size of a problem by a factor of 2. This provides some head room, but almost certainly not one that will last long. Another solution would be to replace all 32-bit int declarations with 64-bit long long declarations. (long is either a 32-bit or a 64-bit integer, depending on the OS). The problem with this approach is that there are only a few arrays that actually need to extended size, and thus this would increase the size of the problem unnecessarily. In a future computing environment where CPUs are abundant but memory relatively scarce, this is probably the wrong approach. Based on these considerations, we have chosen to replace only the global identifiers with the appropriate 64-bit integer. The problem with this approach is finding all the places where data that is specified as a 32-bit integer needs to be replaced with the 64-bit integer. that need to be replaced. In the rest of this paper we describe the techniques used to facilitate this transformation, issues raised, and issues still to be addressed. This poster will describe the reasons, methods, issues associated with extending the ALE3D code to run problems larger than 700 million elements.« less

The topology of the regularized integral surfaces of the 3-body problem

NASA Technical Reports Server (NTRS)

Easton, R.

1971-01-01

Momentum, angular momentum, and energy of integral surfaces in the planar three-body problem are considered. The end points of orbits which cross an isolating block are identified. It is shown that this identification has a unique extension to an identification which pairs the end points of orbits entering the block and which end in a binary collision with the end points of orbits leaving the block and which come from a binary collision. The problem of regularization is that of showing that the identification of the end points of crossing orbits has a continuous, unique extension. The regularized phase space for the three-body problem was obtained, as were regularized integral surfaces for the problem on which the three-body equations of motion induce flows. Finally the topology of these surfaces is described.

Extension Procedures for Confirmatory Factor Analysis

ERIC Educational Resources Information Center

Nagy, Gabriel; Brunner, Martin; Lüdtke, Oliver; Greiff, Samuel

2017-01-01

We present factor extension procedures for confirmatory factor analysis that provide estimates of the relations of common and unique factors with external variables that do not undergo factor analysis. We present identification strategies that build upon restrictions of the pattern of correlations between unique factors and external variables. The…

Dental Evidence in Forensic Identification - An Overview, Methodology and Present Status.

PubMed

Krishan, Kewal; Kanchan, Tanuj; Garg, Arun K

2015-01-01

Forensic odontology is primarily concerned with the use of teeth and oral structures for identification in a legal context. Various forensic odontology techniques help in the identification of the human remains in incidents such as terrorists' attacks, airplane, train and road accidents, fires, mass murders, and natural disasters such as tsunamis, earth quakes and floods, etc. (Disaster Victim Identification-DVI). Dental structures are the hardest and well protected structures in the body. These structures resist decomposition and high temperatures and are among the last ones to disintegrate after death. The principal basis of the dental identification lies in the fact that no two oral cavities are alike and the teeth are unique to an individual. The dental evidence of the deceased recovered from the scene of crime/occurrence is compared with the ante-mortem records for identification. Dental features such as tooth morphology, variations in shape and size, restorations, pathologies, missing tooth, wear patterns, crowding of the teeth, colour and position of the tooth, rotations and other peculiar dental anomalies give every individual a unique identity. In absence of ante-mortem dental records for comparison, the teeth can help in the determination of age, sex, race/ethnicity, habits, occupations, etc. which can give further clues regarding the identity of the individuals. This piece of writing gives an overview of dental evidence, its use in forensic identification and its limitations.

Dental Evidence in Forensic Identification – An Overview, Methodology and Present Status

PubMed Central

Krishan, Kewal; Kanchan, Tanuj; Garg, Arun K

2015-01-01

Forensic odontology is primarily concerned with the use of teeth and oral structures for identification in a legal context. Various forensic odontology techniques help in the identification of the human remains in incidents such as terrorists’ attacks, airplane, train and road accidents, fires, mass murders, and natural disasters such as tsunamis, earth quakes and floods, etc. (Disaster Victim Identification-DVI). Dental structures are the hardest and well protected structures in the body. These structures resist decomposition and high temperatures and are among the last ones to disintegrate after death. The principal basis of the dental identification lies in the fact that no two oral cavities are alike and the teeth are unique to an individual. The dental evidence of the deceased recovered from the scene of crime/occurrence is compared with the ante-mortem records for identification. Dental features such as tooth morphology, variations in shape and size, restorations, pathologies, missing tooth, wear patterns, crowding of the teeth, colour and position of the tooth, rotations and other peculiar dental anomalies give every individual a unique identity. In absence of ante-mortem dental records for comparison, the teeth can help in the determination of age, sex, race/ethnicity, habits, occupations, etc. which can give further clues regarding the identity of the individuals. This piece of writing gives an overview of dental evidence, its use in forensic identification and its limitations. PMID:26312096

27 CFR 53.22 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... number. 53.22 Section 53.22 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... AMMUNITION Administrative and Miscellaneous Provisions § 53.22 Employer identification number. (a... earlier been assigned an employer identification number or has not applied for one, shall make an...

27 CFR 17.22 - Employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... number. 17.22 Section 17.22 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... NONBEVERAGE PRODUCTS Registration § 17.22 Employer identification number. Every person who claims drawback..., and Firearms Taxes, the employer identification number (EIN) assigned by the Internal Revenue Service...

42 CFR 433.37 - Reporting provider payments to Internal Revenue Service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... identification of providers by— (1) Social security number if— (i) The provider is in solo practice; or (ii) The... security number or employer identification number. ... identification number for all other providers. (c) Compliance with section 6041 of the Internal Revenue Code. The...

Can NMR solve some significant challenges in metabolomics?

PubMed Central

Gowda, G.A. Nagana; Raftery, Daniel

2015-01-01

The field of metabolomics continues to witness rapid growth driven by fundamental studies, methods development, and applications in a number of disciplines that include biomedical science, plant and nutrition sciences, drug development, energy and environmental sciences, toxicology, etc. NMR spectroscopy is one of the two most widely used analytical platforms in the metabolomics field, along with mass spectrometry (MS). NMR's excellent reproducibility and quantitative accuracy, its ability to identify structures of unknown metabolites, its capacity to generate metabolite profiles using intact biospecimens with no need for separation, and its capabilities for tracing metabolic pathways using isotope labeled substrates offer unique strengths for metabolomics applications. However, NMR's limited sensitivity and resolution continue to pose a major challenge and have restricted both the number and the quantitative accuracy of metabolites analyzed by NMR. Further, the analysis of highly complex biological samples has increased the demand for new methods with improved detection, better unknown identification, and more accurate quantitation of larger numbers of metabolites. Recent efforts have contributed significant improvements in these areas, and have thereby enhanced the pool of routinely quantifiable metabolites. Additionally, efforts focused on combining NMR and MS promise opportunities to exploit the combined strength of the two analytical platforms for direct comparison of the metabolite data, unknown identification and reliable biomarker discovery that continue to challenge the metabolomics field. This article presents our perspectives on the emerging trends in NMR-based metabolomics and NMR's continuing role in the field with an emphasis on recent and ongoing research from our laboratory. PMID:26476597

Can NMR solve some significant challenges in metabolomics?

NASA Astrophysics Data System (ADS)

Nagana Gowda, G. A.; Raftery, Daniel

2015-11-01

The field of metabolomics continues to witness rapid growth driven by fundamental studies, methods development, and applications in a number of disciplines that include biomedical science, plant and nutrition sciences, drug development, energy and environmental sciences, toxicology, etc. NMR spectroscopy is one of the two most widely used analytical platforms in the metabolomics field, along with mass spectrometry (MS). NMR's excellent reproducibility and quantitative accuracy, its ability to identify structures of unknown metabolites, its capacity to generate metabolite profiles using intact bio-specimens with no need for separation, and its capabilities for tracing metabolic pathways using isotope labeled substrates offer unique strengths for metabolomics applications. However, NMR's limited sensitivity and resolution continue to pose a major challenge and have restricted both the number and the quantitative accuracy of metabolites analyzed by NMR. Further, the analysis of highly complex biological samples has increased the demand for new methods with improved detection, better unknown identification, and more accurate quantitation of larger numbers of metabolites. Recent efforts have contributed significant improvements in these areas, and have thereby enhanced the pool of routinely quantifiable metabolites. Additionally, efforts focused on combining NMR and MS promise opportunities to exploit the combined strength of the two analytical platforms for direct comparison of the metabolite data, unknown identification and reliable biomarker discovery that continue to challenge the metabolomics field. This article presents our perspectives on the emerging trends in NMR-based metabolomics and NMR's continuing role in the field with an emphasis on recent and ongoing research from our laboratory.

21 CFR 801.57 - Discontinuation of legacy FDA identification numbers assigned to devices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Discontinuation of legacy FDA identification... Device Identification § 801.57 Discontinuation of legacy FDA identification numbers assigned to devices... been assigned an FDA labeler code to facilitate use of NHRIC or NDC numbers may continue to use that...

Analysis of blind identification methods for estimation of kinetic parameters in dynamic medical imaging

NASA Astrophysics Data System (ADS)

Riabkov, Dmitri

Compartment modeling of dynamic medical image data implies that the concentration of the tracer over time in a particular region of the organ of interest is well-modeled as a convolution of the tissue response with the tracer concentration in the blood stream. The tissue response is different for different tissues while the blood input is assumed to be the same for different tissues. The kinetic parameters characterizing the tissue responses can be estimated by blind identification methods. These algorithms use the simultaneous measurements of concentration in separate regions of the organ; if the regions have different responses, the measurement of the blood input function may not be required. In this work it is shown that the blind identification problem has a unique solution for two-compartment model tissue response. For two-compartment model tissue responses in dynamic cardiac MRI imaging conditions with gadolinium-DTPA contrast agent, three blind identification algorithms are analyzed here to assess their utility: Eigenvector-based Algorithm for Multichannel Blind Deconvolution (EVAM), Cross Relations (CR), and Iterative Quadratic Maximum Likelihood (IQML). Comparisons of accuracy with conventional (not blind) identification techniques where the blood input is known are made as well. The statistical accuracies of estimation for the three methods are evaluated and compared for multiple parameter sets. The results show that the IQML method gives more accurate estimates than the other two blind identification methods. A proof is presented here that three-compartment model blind identification is not unique in the case of only two regions. It is shown that it is likely unique for the case of more than two regions, but this has not been proved analytically. For the three-compartment model the tissue responses in dynamic FDG PET imaging conditions are analyzed with the blind identification algorithms EVAM and Separable variables Least Squares (SLS). A method of identification that assumes that FDG blood input in the brain can be modeled as a function of time and several parameters (IFM) is analyzed also. Nonuniform sampling SLS (NSLS) is developed due to the rapid change of the FDG concentration in the blood during the early postinjection stage. Comparisons of accuracy of EVAM, SLS, NSLS and IFM identification techniques are made.

Model-free data analysis for source separation based on Non-Negative Matrix Factorization and k-means clustering (NMFk)

NASA Astrophysics Data System (ADS)

Vesselinov, V. V.; Alexandrov, B.

2014-12-01

The identification of the physical sources causing spatial and temporal fluctuations of state variables such as river stage levels and aquifer hydraulic heads is challenging. The fluctuations can be caused by variations in natural and anthropogenic sources such as precipitation events, infiltration, groundwater pumping, barometric pressures, etc. The source identification and separation can be crucial for conceptualization of the hydrological conditions and characterization of system properties. If the original signals that cause the observed state-variable transients can be successfully "unmixed", decoupled physics models may then be applied to analyze the propagation of each signal independently. We propose a new model-free inverse analysis of transient data based on Non-negative Matrix Factorization (NMF) method for Blind Source Separation (BSS) coupled with k-means clustering algorithm, which we call NMFk. NMFk is capable of identifying a set of unique sources from a set of experimentally measured mixed signals, without any information about the sources, their transients, and the physical mechanisms and properties controlling the signal propagation through the system. A classical BSS conundrum is the so-called "cocktail-party" problem where several microphones are recording the sounds in a ballroom (music, conversations, noise, etc.). Each of the microphones is recording a mixture of the sounds. The goal of BSS is to "unmix'" and reconstruct the original sounds from the microphone records. Similarly to the "cocktail-party" problem, our model-freee analysis only requires information about state-variable transients at a number of observation points, m, where m > r, and r is the number of unknown unique sources causing the observed fluctuations. We apply the analysis on a dataset from the Los Alamos National Laboratory (LANL) site. We identify and estimate the impact and sources are barometric pressure and water-supply pumping effects. We also estimate the location of the water-supply pumping wells based on the available data. The possible applications of the NMFk algorithm are not limited to hydrology problems; NMFk can be applied to any problem where temporal system behavior is observed at multiple locations and an unknown number of physical sources are causing these fluctuations.

41 CFR 109-38.5203 - Watercraft identification and numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... identification and numbers. 109-38.5203 Section 109-38.5203 Public Contracts and Property Management Federal... Watercraft identification and numbers. Watercraft in the custody of DOE or designated contractors shall display identifying numbers, whether issued by the U.S. Coast Guard, State, or local field organization...

77 FR 56212 - Federal Acquisition Regulation; Information Collection; Use of Data Universal Numbering System...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

...; Information Collection; Use of Data Universal Numbering System (DUNS) as Primary Contractor Identification... Numbering System (DUNS) as primary contractor identification. The DUNS number is the nine-digit... System (DUNS) as Primary Contractor Identification, by any of the following methods: Regulations.gov...

Fungicide residue identification and discrimination using a conducting polymer electronic-nose

Treesearch

Alphus D. Wilson

2013-01-01

The identification of fungicide residues on crop foliage is necessary to make periodic pest management decisions. The determination of fungicide residue identities currently is difficult and time consuming using conventional chemical analysis methods such as gas chromatography-mass spectroscopy. Different fungicide types produce unique electronic aroma signature...

Hand veins feature extraction using DT-CNNS

NASA Astrophysics Data System (ADS)

Malki, Suleyman; Spaanenburg, Lambert

2007-05-01

As the identification process is based on the unique patterns of the users, biometrics technologies are expected to provide highly secure authentication systems. The existing systems using fingerprints or retina patterns are, however, very vulnerable. One's fingerprints are accessible as soon as the person touches a surface, while a high resolution camera easily captures the retina pattern. Thus, both patterns can easily be "stolen" and forged. Beside, technical considerations decrease the usability for these methods. Due to the direct contact with the finger, the sensor gets dirty, which decreases the authentication success ratio. Aligning the eye with a camera to capture the retina pattern gives uncomfortable feeling. On the other hand, vein patterns of either a palm of the hand or a single finger offer stable, unique and repeatable biometrics features. A fingerprint-based identification system using Cellular Neural Networks has already been proposed by Gao. His system covers all stages of a typical fingerprint verification procedure from Image Preprocessing to Feature Matching. This paper performs a critical review of the individual algorithmic steps. Notably, the operation of False Feature Elimination is applied only once instead of 3 times. Furthermore, the number of iterations is limited to 1 for all used templates. Hence, the computational need of the feedback contribution is removed. Consequently the computational effort is drastically reduced without a notable chance in quality. This allows a full integration of the detection mechanism. The system is prototyped on a Xilinx Virtex II Pro P30 FPGA.

47 CFR 10.320 - Provider alert gateway requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... must be identified by a unique IP address or domain name. (b) Authentication and validation. The CMS... alert gateway if a validation fails. (c) Security. The CMS provider gateway must support standardized IP... CMSP Name Unique identification of CMSP. CMSP gateway Address IP address or Domain Name Alternate IP...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Standardization of grant and contract awardee names has been an area of concern since the development of the Department`s Procurement and Assistance Data System (PADS). A joint effort was begun in 1983 by the Office of Scientific and Technical Information (OSTI) and the Office of Procurement and Assistance Management/Information Systems and Analysis Division to develop a means for providing uniformity of awardee names. As a result of this effort, a method of assigning vendor identification codes to each unique awardee name, division, city, and state combination was developed and is maintained by OSTI. Changes to vendor identification codes or awardeemore » names contained in PADS can be made only by OSTI. Awardee names in the Directory indicate that the awardee has had a prime contract (excluding purchase orders of $10,000 or less) with, or a financial assistance award from, the Department. Award status--active, inactive, or retired--is not shown. The Directory is in alphabetic sequence based on awardee name and reflects the OSTI-assigned vendor identification code to the right of the name. A vendor identification code is assigned to each unique awardee name, division, city, and state (for place of performance). The same vendor identification code is used for awards throughout the Department.« less

Stable isotope, site-specific mass tagging for protein identification

DOEpatents

Chen, Xian

2006-10-24

Proteolytic peptide mass mapping as measured by mass spectrometry provides an important method for the identification of proteins, which are usually identified by matching the measured and calculated m/z values of the proteolytic peptides. A unique identification is, however, heavily dependent upon the mass accuracy and sequence coverage of the fragment ions generated by peptide ionization. The present invention describes a method for increasing the specificity, accuracy and efficiency of the assignments of particular proteolytic peptides and consequent protein identification, by the incorporation of selected amino acid residue(s) enriched with stable isotope(s) into the protein sequence without the need for ultrahigh instrumental accuracy. Selected amino acid(s) are labeled with .sup.13C/.sup.15N/.sup.2H and incorporated into proteins in a sequence-specific manner during cell culturing. Each of these labeled amino acids carries a defined mass change encoded in its monoisotopic distribution pattern. Through their characteristic patterns, the peptides with mass tag(s) can then be readily distinguished from other peptides in mass spectra. The present method of identifying unique proteins can also be extended to protein complexes and will significantly increase data search specificity, efficiency and accuracy for protein identifications.

30 CFR 45.3 - Identification of independent contractors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Identification of independent contractors. 45.3... ADMINISTRATIVE REQUIREMENTS INDEPENDENT CONTRACTORS § 45.3 Identification of independent contractors. (a) Any independent contractor may obtain a permanent MSHA identification number. To obtain an identification number...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 15 2013-04-01 2013-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 15 2011-04-01 2011-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 15 2012-04-01 2012-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 15 2014-04-01 2014-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

27 CFR 40.169 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... number. 40.169 Section 40.169 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Payment of Taxes on Tobacco Products § 40.169 Employer identification number. The employer identification number (defined at 26 CFR 301.7701-12) of a manufacturer of tobacco products who has been assigned such a...

15 CFR 14.18 - Taxpayer identification number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Taxpayer identification number. 14.18... COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 14.18 Taxpayer identification number. In accordance with... identifying number will be required from applicants for grants and cooperative agreements funded by the DoC...

78 FR 68817 - Proposed Information Collection; Comment Request; Northeast Region Gear Identification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-15

... provide vessel and gear identification information (e.g., hull identification number, Federal fishing... submitted to the NMFS as a result of this collection. The vessel's hull identification number or other means...

Profiling refined hydrocarbon fuels using polar components

USGS Publications Warehouse

Rostad, C.E.; Hostettler, F.D.

2007-01-01

Identification of a fuel released into the environment can be difficult due to biodegradation or weathering. Negative electrospray ionization/mass spectrometry was used to screen for unique polar components in a wide variety of commercial hydrocarbon products and mixtures. These fuels produced unique and relatively simple spectra. When applied to hydrocarbon samples from a large, long-term fuel spill in a relatively cool climate in which the alkane, isoprenoid, and alkylcyclohexane portions had begun to biodegrade or weather, the polar components in these samples had changed little over time. This technique provided rapid fuel identification on hydrocarbons released into the environment, without sample preparation, fractionation, or chromatography. Copyright ?? Taylor & Francis Group, LLC.

Resting State EEG-based biometrics for individual identification using convolutional neural networks.

PubMed

Lan Ma; Minett, James W; Blu, Thierry; Wang, William S-Y

2015-08-01

Biometrics is a growing field, which permits identification of individuals by means of unique physical features. Electroencephalography (EEG)-based biometrics utilizes the small intra-personal differences and large inter-personal differences between individuals' brainwave patterns. In the past, such methods have used features derived from manually-designed procedures for this purpose. Another possibility is to use convolutional neural networks (CNN) to automatically extract an individual's best and most unique neural features and conduct classification, using EEG data derived from both Resting State with Open Eyes (REO) and Resting State with Closed Eyes (REC). Results indicate that this CNN-based joint-optimized EEG-based Biometric System yields a high degree of accuracy of identification (88%) for 10-class classification. Furthermore, rich inter-personal difference can be found using a very low frequency band (0-2Hz). Additionally, results suggest that the temporal portions over which subjects can be individualized is less than 200 ms.

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

16 CFR 303.20 - Registered identification numbers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... identification numbers. (a) Registered numbers for use as the required identification in lieu of the name on.... When so used by the person or firm to whom assigned, the use of the numbers shall be construed as..., Federal Trade Commission, 600 Pennsylvania Avenue, NW., Washington, DC 20580, or on the Internet at http...

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

INTERNATIONAL ENVIRONMENTAL TECHNOLOGY IDENTIFICATION, DEVELOPMENT, DEMONSTRATION, DEPLOYMENT AND EXCHANGE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roy C. Herndon

2001-02-28

Cooperative Agreement (DE-FC21-95EW55101) between the U.S. Department of Energy (DOE) and the Florida State University's Institute for International Cooperative Environmental Research (IICER) was designed to facilitate a number of joint programmatic goals of both the DOE and the IICER related to international technology identification, development, demonstration and deployment using a variety of mechanisms to accomplish these goals. These mechanisms included: laboratory and field research; technology demonstrations; international training and technical exchanges; data collection, synthesis and evaluation; the conduct of conferences, symposia and high-level meetings; and other appropriate and effective approaches. The DOE utilized the expertise and facilities of the IICERmore » at Florida State University to accomplish its goals related to this cooperative agreement. The IICER has unique and demonstrated capabilities that have been utilized to conduct the tasks for this cooperative agreement. The IICER conducted activities related to technology identification, development, evaluation, demonstration and deployment through its joint centers which link the capabilities at Florida State University with collaborating academic and leading research institutions in the major countries of Central and Eastern Europe (e.g., Czech Republic, Hungary, Poland) and Russia. The activities and accomplishments for this five-year cooperative agreement are summarized in this Final Technical Report.« less

Homing behaviour and individual identification of the pipefish Nerophis lumbriciformis (Pisces; Syngnathidae): a true intertidal resident?

NASA Astrophysics Data System (ADS)

Monteiro, Nuno Miguel; Vieira, Maria da Natividade; Almada, Vitor

2005-04-01

Syngnathids have been the focus of growing interest due to their peculiar reproductive biology and vulnerability to environmental degradation and overcollecting. In this study, near the south limit of the species' geographic distribution, a description of the homing behaviour of the worm pipefish, Nerophis lumbriciformis, based on the unique facial pigmentation patterns, is presented. Even though the amount of facial pigmentation was substantially higher in larger adult females, suggesting that it can be part of the secondary sexual repertoire of this sex role reversed species, this technique allowed for the positive identification of adult individuals (males and females) during at least 19 months. Recaptures showed that this pipefish shows a strong homing behaviour, with individuals being regularly captured within less than 2 m of the original identification event. The absence of horizontal migrations to adjacent areas and the observation of adults in the subtidal, together with the overall low number of recaptures (even though some individuals were cyclically resighted) highlighted the fact that the intertidal is not N. lumbriciformis' permanent residence. This observation also demonstrates that the estimation of the population size, important for conservation purposes, based solely on intertidal data can be misleading because captured individuals are only a fraction of a larger, mainly subtidal, population.

Applied patent RFID systems for building reacting HEPA air ventilation system in hospital operation rooms.

PubMed

Lin, Jesun; Pai, Jar-Yuan; Chen, Chih-Cheng

2012-12-01

RFID technology, an automatic identification and data capture technology to provide identification, tracing, security and so on, was widely applied to healthcare industry in these years. Employing HEPA ventilation system in hospital is a way to ensure healthful indoor air quality to protect patients and healthcare workers against hospital-acquired infections. However, the system consumes lots of electricity which cost a lot. This study aims to apply the RFID technology to offer a unique medical staff and patient identification, and reacting HEPA air ventilation system in order to reduce the cost, save energy and prevent the prevalence of hospital-acquired infection. The system, reacting HEPA air ventilation system, contains RFID tags (for medical staffs and patients), sensor, and reacting system which receives the information regarding the number of medical staff and the status of the surgery, and controls the air volume of the HEPA air ventilation system accordingly. A pilot program was carried out in a unit of operation rooms of a medical center with 1,500 beds located in central Taiwan from Jan to Aug 2010. The results found the air ventilation system was able to function much more efficiently with less energy consumed. Furthermore, the indoor air quality could still keep qualified and hospital-acquired infection or other occupational diseases could be prevented.

Impact of sequencing depth and read length on single cell RNA sequencing data of T cells.

PubMed

Rizzetto, Simone; Eltahla, Auda A; Lin, Peijie; Bull, Rowena; Lloyd, Andrew R; Ho, Joshua W K; Venturi, Vanessa; Luciani, Fabio

2017-10-06

Single cell RNA sequencing (scRNA-seq) provides great potential in measuring the gene expression profiles of heterogeneous cell populations. In immunology, scRNA-seq allowed the characterisation of transcript sequence diversity of functionally relevant T cell subsets, and the identification of the full length T cell receptor (TCRαβ), which defines the specificity against cognate antigens. Several factors, e.g. RNA library capture, cell quality, and sequencing output affect the quality of scRNA-seq data. We studied the effects of read length and sequencing depth on the quality of gene expression profiles, cell type identification, and TCRαβ reconstruction, utilising 1,305 single cells from 8 publically available scRNA-seq datasets, and simulation-based analyses. Gene expression was characterised by an increased number of unique genes identified with short read lengths (<50 bp), but these featured higher technical variability compared to profiles from longer reads. Successful TCRαβ reconstruction was achieved for 6 datasets (81% - 100%) with at least 0.25 millions (PE) reads of length >50 bp, while it failed for datasets with <30 bp reads. Sufficient read length and sequencing depth can control technical noise to enable accurate identification of TCRαβ and gene expression profiles from scRNA-seq data of T cells.

Optical identification using imperfections in 2D materials

NASA Astrophysics Data System (ADS)

Cao, Yameng; Robson, Alexander J.; Alharbi, Abdullah; Roberts, Jonathan; Woodhead, Christopher S.; Noori, Yasir J.; Bernardo-Gavito, Ramón; Shahrjerdi, Davood; Roedig, Utz; Fal'ko, Vladimir I.; Young, Robert J.

2017-12-01

The ability to uniquely identify an object or device is important for authentication. Imperfections, locked into structures during fabrication, can be used to provide a fingerprint that is challenging to reproduce. In this paper, we propose a simple optical technique to read unique information from nanometer-scale defects in 2D materials. Imperfections created during crystal growth or fabrication lead to spatial variations in the bandgap of 2D materials that can be characterized through photoluminescence measurements. We show a simple setup involving an angle-adjustable transmission filter, simple optics and a CCD camera can capture spatially-dependent photoluminescence to produce complex maps of unique information from 2D monolayers. Atomic force microscopy is used to verify the origin of the optical signature measured, demonstrating that it results from nanometer-scale imperfections. This solution to optical identification with 2D materials could be employed as a robust security measure to prevent counterfeiting.

Religiosity as identity: toward an understanding of religion from a social identity perspective.

PubMed

Ysseldyk, Renate; Matheson, Kimberly; Anisman, Hymie

2010-02-01

As a social identity anchored in a system of guiding beliefs and symbols, religion ought to serve a uniquely powerful function in shaping psychological and social processes. Religious identification offers a distinctive "sacred" worldview and "eternal" group membership, unmatched by identification with other social groups. Thus, religiosity might be explained, at least partially, by the marked cognitive and emotional value that religious group membership provides. The uniqueness of a positive social group, grounded in a belief system that offers epistemological and ontological certainty, lends religious identity a twofold advantage for the promotion of well-being. However, that uniqueness may have equally negative impacts when religious identity itself is threatened through intergroup conflict. Such consequences are illustrated by an examination of identities ranging from religious fundamentalism to atheism. Consideration of religion's dual function as a social identity and a belief system may facilitate greater understanding of the variability in its importance across individuals and groups.

Cranial morphology of Javanese Homo erectus: new evidence for continuous evolution, specialization, and terminal extinction.

PubMed

Kaifu, Yousuke; Aziz, Fachroel; Indriati, Etty; Jacob, Teuku; Kurniawan, Iwan; Baba, Hisao

2008-10-01

Our current knowledge of the evolution of Homo during the early to middle Pleistocene is far from complete. This is not only because of the small number of fossil samples available, but also due to the scarcity of standardized datasets which are reliable in terms of landmark identification, interobserver error, and other distorting factors. This study aims to accurately describe the cranial morphological changes of H. erectus in Java using a standardized set of measurements taken by the authors from 18 adult crania from Sangiran, Trinil, Sambungmacan, and Ngandong. The identification of some obscure landmarks was aided by the use of micro-CT imaging. While recent studies tend to emphasize evolutionary conservatism in Javanese H. erectus, our results reinforce the theory that chronologically later groups experienced distinct morphological changes in a number of cranial traits. Some of these changes, particularly those related to brain size expansion, are similar to those observed for the genus Homo as a whole, whereas others are apparently unique specializations restricted to Javanese H. erectus. Such morphological specializations in Java include previously undescribed anteroposterior lengthening of the midcranial base and an anterior shift of the posterior temporal muscle, which might have influenced the morphology of the angular torus and supramastoid sulcus. Analyses of morphological variation indicate that the three crania from Sambungmacan variously fill the morphological gap between the chronologically earlier (Bapang-AG, Bapang Formation above the Grenzbank zone in Sangiran) and later (Ngandong) morphotypes of Java. At least one of the Bapang-AG crania, Sangiran 17, also exhibits a few characteristics which potentially indicate evolution toward the Ngandong condition. These strongly suggest the continuous, gradual morphological evolution of Javanese H. erectus from the Bapang-AG to Ngandong periods. The development of some unique features in later Javanese H. erectus supports the hypothesis that this Javanese lineage went extinct without making significant contributions to the ancestry of modern humans.

19 CFR 123.73 - Application to participate.

Code of Federal Regulations, 2010 CFR

2010-04-01

... number(s), conveyance-specific identifying markings, e.g., vehicle identification numbers (VINs), and any... information: (a) General business identification and site condition information. The name and address of the... individual LBCIP-authorized drivers; (c) Conveyance identification information. A listing of the conveyances...

Baboquivari Mountain plants: Identification, ecology, and ethnobotany [Book Review

Treesearch

Rosemary L. Pendleton

2011-01-01

The Sky Islands of southern Arizona and northwestern Mexico make up a region that is rich, both biologically and culturally. These isolated mountain ranges, separated by desert "seas," contain a unique and diverse flora and have long been home to indigenous peoples of the southwestern US. This book, Baboquivari Mountain Plants: Identification, Ecology, and...

Understanding Diversity of English Language Learners: Identification of ELLs and ELLs with Disabilities

ERIC Educational Resources Information Center

Wang, Charity

2014-01-01

English Language Learners (ELLs) are one of the fastest growing student populations throughout the country. With ELLs come unique challenges schools must navigate to best serve these students. One challenge is the identification of these students and proper placement and service within ELL programs offered by schools. Another challenge is…

Authentication of Radio Frequency Identification Devices Using Electronic Characteristics

ERIC Educational Resources Information Center

Chinnappa Gounder Periaswamy, Senthilkumar

2010-01-01

Radio frequency identification (RFID) tags are low-cost devices that are used to uniquely identify the objects to which they are attached. Due to the low cost and size that is driving the technology, a tag has limited computational capabilities and resources. This limitation makes the implementation of conventional security protocols to prevent…

Identification of illicit drugs by a combination of liquid chromatography and surface-enhanced Raman scattering spectroscopy

NASA Astrophysics Data System (ADS)

Sägmüller, Bernd; Schwarze, Bernd; Brehm, Georg; Trachta, Gerd; Schneider, Siegfried

2003-12-01

We have developed a new analysis procedure based upon High-Performance Liquid Chromatography (HPLC) in combination with surface-enhanced Raman scattering (SERS) spectroscopy as detection technique to meet todays need for an additional unique and reliable identification method of the ingredients of illicitly sold drugs or other pharmaceutical compounds. Separation of the individual components of a sample was preferentially achieved by employing an acetonitrile free eluent. The fractions of interest were collected as microliter volumes in the wells of a microtiter plate, which contained a home-made, matrix-stabilized silver halide dispersion. The latter functions as the precursor for the SERS-active surface generated by the probing laser beam. The limits of detection can be as low as 1 μg of analyte per one well of the microtiter plate. The recorded SERS spectra of the drugs Cocaine, Heroine and Amphetamine or the pharmaceuticals (Nor-) Papaverine and Procaine promise the possibility of a unique identification, especially if compared with the spectra of reference samples, and, therefore, can support the conclusions drawn by other identification techniques, if requested for example during a law suit.

Automated vehicle identification tags in San Antonio : lessons learned from the metropolitan model deployment initiative : unique method for collecting arterial travel speed information

DOT National Transportation Integrated Search

2000-10-01

This report demonstrates a unique solution to the challenge of providing accurate, timely estimates of arterial travel times to the motoring public. In particular, it discusses the lessons learned in deploying the Vehicle Tag Project in San Antonio, ...

Author Identification, Idiolect, and Linguistic Uniqueness

ERIC Educational Resources Information Center

Coulthard, Malcolm

2004-01-01

For forty years linguists have talked about idiolect and the uniqueness of individual utterances. This article explores how far these two concepts can be used to answer certain questions about the authorship of written documents--for instance how similar can two student essays be before one begins to suspect plagiarism? The article examines two…

Biometric identification based on feature fusion with PCA and SVM

NASA Astrophysics Data System (ADS)

Lefkovits, László; Lefkovits, Szidónia; Emerich, Simina

2018-04-01

Biometric identification is gaining ground compared to traditional identification methods. Many biometric measurements may be used for secure human identification. The most reliable among them is the iris pattern because of its uniqueness, stability, unforgeability and inalterability over time. The approach presented in this paper is a fusion of different feature descriptor methods such as HOG, LIOP, LBP, used for extracting iris texture information. The classifiers obtained through the SVM and PCA methods demonstrate the effectiveness of our system applied to one and both irises. The performances measured are highly accurate and foreshadow a fusion system with a rate of identification approaching 100% on the UPOL database.

Proposing national identification number on dental prostheses as universal personal identification code - A revolution in forensic odontology

PubMed Central

Baad, Rajendra K.; Belgaumi, Uzma; Vibhute, Nupura; Kadashetti, Vidya; Chandrappa, Pramod Redder; Gugwad, Sushma

2015-01-01

The proper identification of a decedent is not only important for humanitarian and emotional reasons, but also for legal and administrative purposes. During the reconstructive identification process, all necessary information is gathered from the unknown body of the victim and hence that an objective reconstructed profile can be established. Denture marking systems are being used in various situations, and a number of direct and indirect methods are reported. We propose that national identification numbers be incorporated in all removable and fixed prostheses, so as to adopt a single and definitive universal personal identification code with the aim of achieving a uniform, standardized, easy, and fast identification method worldwide for forensic identification. PMID:26005294

Provider reported barriers and solutions to improve testing among tuberculosis patients ‘eligible for drug susceptibility test’: A qualitative study from programmatic setting in India

PubMed Central

Parmar, Malik; Verma, Manoj; Desikan, Prabha; Khan, Sheeba Naz; Kumar, Ajay M. V.

2018-01-01

Background In a study conducted in Bhopal district (a setting with facility for molecular drug susceptibility testing (DST)) located in central India in 2014–15, we found high levels of pre-diagnosis attrition among patients with presumptive multi drug-resistant tuberculosis (MDR-TB)–meaning TB patients who were eligible for DST, were not being tested. Objectives In this study, we explored the health care provider perspectives into barriers and suggested solutions for improving DST. Methods This was a descriptive qualitative study. One to one interviews (n = 10) and focus group discussions (n = 2) with experienced key informants involved in programmatic management of DR-TB were conducted in April 2017. Manual descriptive thematic analysis was performed. Results The key barriers reported were a) lack of or delay in identification of patients eligible for DST because of using treatment register as the source for identifying patients b) lack of assured specimen transport after patient identification and c) lack of tracking. Extra pulmonary TB patients were not getting identified as eligible for DST. Solutions suggested by the health care providers were i) generation of unique identifier at identification in designated microscopy center (DMC), immediate intimation of unique identifier to district and regular monitoring by senior TB laboratory and senior treatment supervisors of patients eligible for DST that were missed; ii) documentation of unique identifier at each step of cascade; iii) use of human carriers/couriers to transport specimen from DMCs especially in rural areas; and iv) routine entry of all presumptive extra-pulmonary TB specimen, as far as possible, in DMC laboratory register. Conclusion Lack of assured specimen transport and lack of accountability for tracking patient after identification and referral were the key barriers. The identification of patients eligible for DST among microbiologically confirmed TB at the time of diagnosis and among clinically confirmed TB at the time of treatment initiation is the key. Use of unique identifier at identification and its use to ensure cohort wise tracking has to be complemented with specimen transport support and prompt feedback to the DMC. The study has implications to improve detection of MDR-TB among diagnosed/notified TB patients. PMID:29677210

Development of a master health facility list in Nigeria.

PubMed

Makinde, Olusesan Ayodeji; Azeez, Aderemi; Bamidele, Samson; Oyemakinde, Akin; Oyediran, Kolawole Azeez; Adebayo, Wura; Fapohunda, Bolaji; Abioye, Abimbola; Mullen, Stephanie

2014-01-01

Abstract. Routine Health Information Systems (RHIS) are increasingly transitioning to electronic platforms in several developing countries. Establishment of a Master Facility List (MFL) to standardize the allocation of unique identifiers for health facilities can overcome identification issues and support health facility management. The Nigerian Federal Ministry of Health (FMOH) recently developed a MFL, and we present the process and outcome. The MFL was developed from the ground up, and includes a state code, a local government area (LGA) code, health facility ownership (public or private), the level of care, and an exclusive LGA level health facility serial number, as part of the unique identifier system in Nigeria. To develop the MFL, the LGAs sent the list of all health facilities in their jurisdiction to the state, which in turn collated for all LGAs under them before sending to the FMOH. At the FMOH, a group of RHIS experts verified the list and identifiers for each state. The national MFL consists of 34,423 health facilities uniquely identified. The list has been published and is available for worldwide access; it is currently used for planning and management of health services in Nigeria. Unique identifiers are a basic component of any information system. However, poor planning and execution of implementing this key standard can diminish the success of the RHIS. Development and adherence to standards is the hallmark for a national health information infrastructure. Explicit processes and multi-level stakeholder engagement is necessary to ensuring the success of the effort.

VizieR Online Data Catalog: Far-UV spectral atlas of O-type stars (Smith, 2012)

NASA Astrophysics Data System (ADS)

Smith, M. A.

2012-10-01

In this paper, we present a spectral atlas covering the wavelength interval 930-1188Å for O2-O9.5 stars using Far-Ultraviolet Spectroscopic Explorer archival data. The stars selected for the atlas were drawn from three populations: Galactic main-sequence (classes III-V) stars, supergiants, and main-sequence stars in the Magellanic Clouds, which have low metallicities. For several of these stars, we have prepared FITS files comprised of pairs of merged spectra for user access via the Multimission Archive at Space Telescope (MAST). We chose spectra from the first population with spectral types O4, O5, O6, O7, O8, and O9.5 and used them to compile tables and figures with identifications of all possible atmospheric and interstellar medium lines in the region 949-1188Å. Our identified line totals for these six representative spectra are 821 (500), 992 (663), 1077 (749), 1178 (847), 1359 (1001), and 1798 (1392) lines, respectively, where the numbers in parentheses are the totals of lines formed in the atmospheres, according to spectral synthesis models. The total number of unique atmospheric identifications for the six main-sequence O-star template spectra is 1792, whereas the number of atmospheric lines in common to these spectra is 300. The number of identified lines decreases toward earlier types (increasing effective temperature), while the percentages of "missed" features (unknown lines not predicted from our spectral syntheses) drop from a high of 8% at type B0.2, from our recently published B-star far-UV atlas (Cat. J/ApJS/186/175), to 1%-3% for type O spectra. The percentages of overpredicted lines are similar, despite their being much higher for B-star spectra. (4 data files).

An unsupervised hierarchical dynamic self-organizing approach to cancer class discovery and marker gene identification in microarray data.

PubMed

Hsu, Arthur L; Tang, Sen-Lin; Halgamuge, Saman K

2003-11-01

Current Self-Organizing Maps (SOMs) approaches to gene expression pattern clustering require the user to predefine the number of clusters likely to be expected. Hierarchical clustering methods used in this area do not provide unique partitioning of data. We describe an unsupervised dynamic hierarchical self-organizing approach, which suggests an appropriate number of clusters, to perform class discovery and marker gene identification in microarray data. In the process of class discovery, the proposed algorithm identifies corresponding sets of predictor genes that best distinguish one class from other classes. The approach integrates merits of hierarchical clustering with robustness against noise known from self-organizing approaches. The proposed algorithm applied to DNA microarray data sets of two types of cancers has demonstrated its ability to produce the most suitable number of clusters. Further, the corresponding marker genes identified through the unsupervised algorithm also have a strong biological relationship to the specific cancer class. The algorithm tested on leukemia microarray data, which contains three leukemia types, was able to determine three major and one minor cluster. Prediction models built for the four clusters indicate that the prediction strength for the smaller cluster is generally low, therefore labelled as uncertain cluster. Further analysis shows that the uncertain cluster can be subdivided further, and the subdivisions are related to two of the original clusters. Another test performed using colon cancer microarray data has automatically derived two clusters, which is consistent with the number of classes in data (cancerous and normal). JAVA software of dynamic SOM tree algorithm is available upon request for academic use. A comparison of rectangular and hexagonal topologies for GSOM is available from http://www.mame.mu.oz.au/mechatronics/journalinfo/Hsu2003supp.pdf

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 27 2013-07-01 2013-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

76 FR 7757 - Hull Identification Numbers for Recreational Vessels

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 181 [Docket No. USCG-2007-29236] Hull Identification Numbers for Recreational Vessels AGENCY: Coast Guard, DHS. ACTION: Follow-up to request for... expanded hull identification number (HIN). The Coast Guard's decision-making process included consideration...

47 CFR 2.303 - Other forms of identification of stations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Aircraft (U.S. registry) telephone Registration number preceded by the type of the aircraft, or the... aircraft, e.g., the air carrier parent aircraft flight number or identification, the aircraft registration... of station, operating agency, official registration mark, flight identification number, selective...

47 CFR 2.303 - Other forms of identification of stations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Aircraft (U.S. registry) telephone Registration number preceded by the type of the aircraft, or the... aircraft, e.g., the air carrier parent aircraft flight number or identification, the aircraft registration... of station, operating agency, official registration mark, flight identification number, selective...

47 CFR 2.303 - Other forms of identification of stations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Aircraft (U.S. registry) telephone Registration number preceded by the type of the aircraft, or the... aircraft, e.g., the air carrier parent aircraft flight number or identification, the aircraft registration... of station, operating agency, official registration mark, flight identification number, selective...

47 CFR 2.303 - Other forms of identification of stations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Aircraft (U.S. registry) telephone Registration number preceded by the type of the aircraft, or the... aircraft, e.g., the air carrier parent aircraft flight number or identification, the aircraft registration... of station, operating agency, official registration mark, flight identification number, selective...

Recording of individual identification information on dental prostheses using fluorescent material and ultraviolet light.

PubMed

Naito, Yoshihito; Meinar, Ashrin N; Iwawaki, Yuki; Kashiwabara, Toshiya; Goto, Takaharu; Ito, Teruaki; Sakuma, Tetsuro; Ichikawa, Tetsuo

2013-01-01

The placement of individual identification on a prosthesis is very important for forensic dentistry and traceability. This article describes the unique naming/labeling of dentures with information for individual identification using a method in which information is invisible under natural light but visible under ultraviolet light-emitting diode/black light exposure. The use of laser beam machining with this method will enable the recording of a large amount of information.

System for tamper identification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bobbitt, III, John Thomas; Weeks, George E.

2017-09-05

A system for tamper identification. A fastener has a tamper identification surface with a unique grain structure that is altered if the fastener is removed or otherwise exposed to sufficient torque. After a period of time such as e.g., shipment and/or storage of the sealed container, a determination of whether tampering has occurred can be undertaken by examining the grain structure to determine if it has changed since the fastener was used to seal the container or secure the device.

Identification of a Unique Amyloid Sequence in AA Amyloidosis of a Pig Associated With Streptococcus Suis Infection.

PubMed

Kamiie, J; Sugahara, G; Yoshimoto, S; Aihara, N; Mineshige, T; Uetsuka, K; Shirota, K

2017-01-01

Here we report a pig with amyloid A (AA) amyloidosis associated with Streptococcus suis infection and identification of a unique amyloid sequence in the amyloid deposits in the tissue. Tissues from the 180-day-old underdeveloped pig contained foci of necrosis and suppurative inflammation associated with S. suis infection. Congo red stain, immunohistochemistry, and electron microscopy revealed intense AA deposition in the spleen and renal glomeruli. Mass spectrometric analysis of amyloid material extracted from the spleen showed serum AA 2 (SAA2) peptide as well as a unique peptide sequence previously reported in a pig with AA amyloidosis. The common detection of the unique amyloid sequence in the current and past cases of AA amyloidosis in pigs suggests that this amyloid sequence might play a key role in the development of porcine AA amyloidosis. An in vitro fibrillation assay demonstrated that the unique AA peptide formed typically rigid, long amyloid fibrils (10 nm wide) and the N-terminus peptide of SAA2 formed zigzagged, short fibers (7 nm wide). Moreover, the SAA2 peptide formed long, rigid amyloid fibrils in the presence of sonicated amyloid fibrils formed by the unique AA peptide. These findings indicate that the N-terminus of SAA2 as well as the AA peptide mediate the development of AA amyloidosis in pigs via cross-seeding polymerization.

Molecular Identification of the Schwannomatosis Locus

DTIC Science & Technology

2005-07-01

AD Award Number: DAMD17-03-1-0445 TITLE: Molecular Identification of the Schwannomatosis Locus PRINCIPAL INVESTIGATOR: Mia M. MacCollin, M.D...NUMBER Molecular Identification of the Schwannomatosis Locus 5b. GRANT NUMBER DAMD17-03-1-0445 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER...can be found on next page. 15. SUBJECT TERMS schwannomatosis , tumor suppressor gene, NF2, molecular genetics 16. SECURITY CLASSIFICATION OF: 17

Practical relevance of pattern uniqueness in forensic science.

PubMed

Jayaprakash, Paul T

2013-09-10

Uniqueness being unprovable, it has recently been argued that individualization in forensic science is irrelevant and, probability, as applied for DNA profiles, should be applied for all identifications. Critiques against uniqueness have omitted physical matching, a realistic and tangible individualization that supports uniqueness. Describing case examples illustrating pattern matches including physical matching, it is indicated that individualizations are practically relevant for forensic science as they establish facts on a definitive basis providing firm leads benefitting criminal investigation. As a tenet of forensic identification, uniqueness forms a fundamental paradigm relevant for individualization. Evidence on the indeterministic and stochastic causal pathways of characteristics in patterns available in the related fields of science sufficiently supports the proposition of uniqueness. Characteristics involved in physical matching and matching achieved in patterned evidence existing in the state of nature are not events amenable for counting; instead these are ensemble of visible units occupying the entire pattern area stretching the probability of re-occurrence of a verisimilitude pattern into infinity offering epistemic support to uniqueness. Observational methods are as respectable as instrumental or statistical methods since they are capable of generating results that are tangible and obviously valid as in physical matching. Applying the probabilistic interpretation used for DNA profiles to the other patterns would be unbefitting since these two are disparate, the causal pathways of the events, the loci, in the manipulated DNA profiles being determinable. While uniqueness enables individualizations, it does not vouch for eliminating errors. Instead of dismissing uniqueness and individualization, accepting errors as human or system failures and seeking remedial measures would benefit forensic science practice and criminal investigation. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

40 CFR 279.43 - Used oil transportation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... identification number; (2) A used oil processing/re-refining facility who has obtained an EPA identification number; (3) An off-specification used oil burner facility who has obtained an EPA identification number... parts 171 through 180. Persons transporting used oil that meets the definition of a hazardous material...

40 CFR 279.43 - Used oil transportation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... identification number; (2) A used oil processing/re-refining facility who has obtained an EPA identification number; (3) An off-specification used oil burner facility who has obtained an EPA identification number... parts 171 through 180. Persons transporting used oil that meets the definition of a hazardous material...

Preliminary studies of laser-induced breakdown spectrometry for the determination of Ba, Cd, Cr and Pb in toys

NASA Astrophysics Data System (ADS)

Godoi, Quienly; Santos, Dario, Jr.; Nunes, Lidiane C.; Leme, Flávio O.; Rufini, Iolanda A.; Agnelli, José A. M.; Trevizan, Lilian C.; Krug, Francisco J.

2009-06-01

The performance of laser-induced breakdown spectrometry (LIBS) for the determination of Ba, Cd, Cr and Pb in toys has been evaluated by using a Nd:YAG laser operating at 1064 nm and an Echelle spectrometer with intensified charge-coupled device detector. Samples were purchased in different cities of São Paulo State market and analyzed directly without sample preparation. Laser-induced breakdown spectrometry experimental conditions (number of pulses, delay time, integration time gate and pulse energy) were optimized by using a Doehlert design. Laser-induced breakdown spectrometry signals correlated reasonably well with inductively coupled plasma optical emission spectrometry (ICP OES) concentrations after microwave-assisted acid digestion of selected samples. Thermal analysis was used for polymer identification and scanning electron microscopy to visualize differences in crater geometry of different polymers employed for toy fabrication. Results indicate that laser-induced breakdown spectrometry can be proposed as a rapid screening method for investigation of potentially toxic elements in toys. The unique application of laser-induced breakdown spectrometry for identification of contaminants in successive layers of ink and polymer is also demonstrated.

Error free physically unclonable function with programmed resistive random access memory using reliable resistance states by specific identification-generation method

NASA Astrophysics Data System (ADS)

Tseng, Po-Hao; Hsu, Kai-Chieh; Lin, Yu-Yu; Lee, Feng-Min; Lee, Ming-Hsiu; Lung, Hsiang-Lan; Hsieh, Kuang-Yeu; Chung Wang, Keh; Lu, Chih-Yuan

2018-04-01

A high performance physically unclonable function (PUF) implemented with WO3 resistive random access memory (ReRAM) is presented in this paper. This robust ReRAM-PUF can eliminated bit flipping problem at very high temperature (up to 250 °C) due to plentiful read margin by using initial resistance state and set resistance state. It is also promised 10 years retention at the temperature range of 210 °C. These two stable resistance states enable stable operation at automotive environments from -40 to 125 °C without need of temperature compensation circuit. The high uniqueness of PUF can be achieved by implementing a proposed identification (ID)-generation method. Optimized forming condition can move 50% of the cells to low resistance state and the remaining 50% remain at initial high resistance state. The inter- and intra-PUF evaluations with unlimited separation of hamming distance (HD) are successfully demonstrated even under the corner condition. The number of reproduction was measured to exceed 107 times with 0% bit error rate (BER) at read voltage from 0.4 to 0.7 V.

Fission fragment yields from heavy-ion-induced reactions measured with a fragment separator

NASA Astrophysics Data System (ADS)

Tarasov, O. B.; Delaune, O.; Farget, F.; Morrissey, D. J.; Amthor, A. M.; Bastin, B.; Bazin, D.; Blank, B.; Cacéres, L.; Chbihi, A.; Fernández-Dominguez, B.; Grévy, S.; Kamalou, O.; Lukyanov, S. M.; Mittig, W.; Pereira, J.; Perrot, L.; Saint-Laurent, M.-G.; Savajols, H.; Sherrill, B. M.; Stodel, C.; Thomas, J. C.; Villari, A. C.

2018-04-01

The systematic study of fission fragment yields under different initial conditions has provided valuable experimental data for benchmarking models of fission product yields. Nuclear reactions using inverse kinematics coupled to the use of a high-resolution spectrometer with good fragment identification are shown here to be a powerful tool to measure the inclusive isotopic yields of fission fragments. In-flight fusion-fission was used in this work to produce secondary beams of neutron-rich isotopes in the collisions of a 238U beam at 24 MeV/u with 9Be and 12C targets at GANIL using the LISE3 fragment separator. Unique identification of the A, Z, and atomic charge state, q, of fission products was attained with the Δ E- TKE-B ρ- ToF measurement technique. Mass, and atomic number distributions are reported for the two reactions. The results show the importance of different reaction mechanisms in the two cases. The optimal target material for higher yields of neutron-rich high- Z isotopes produced in fusion-fission reactions as a function of projectile energy is discussed.

Microfluidic droplet enrichment for targeted sequencing

PubMed Central

Eastburn, Dennis J.; Huang, Yong; Pellegrino, Maurizio; Sciambi, Adam; Ptáček, Louis J.; Abate, Adam R.

2015-01-01

Targeted sequence enrichment enables better identification of genetic variation by providing increased sequencing coverage for genomic regions of interest. Here, we report the development of a new target enrichment technology that is highly differentiated from other approaches currently in use. Our method, MESA (Microfluidic droplet Enrichment for Sequence Analysis), isolates genomic DNA fragments in microfluidic droplets and performs TaqMan PCR reactions to identify droplets containing a desired target sequence. The TaqMan positive droplets are subsequently recovered via dielectrophoretic sorting, and the TaqMan amplicons are removed enzymatically prior to sequencing. We demonstrated the utility of this approach by generating an average 31.6-fold sequence enrichment across 250 kb of targeted genomic DNA from five unique genomic loci. Significantly, this enrichment enabled a more comprehensive identification of genetic polymorphisms within the targeted loci. MESA requires low amounts of input DNA, minimal prior locus sequence information and enriches the target region without PCR bias or artifacts. These features make it well suited for the study of genetic variation in a number of research and diagnostic applications. PMID:25873629

Unique Association of Rare Cardiovascular Disease in an Athlete With Ventricular Arrhythmias.

PubMed

Santomauro, V; Contursi, M; Dellegrottaglie, S; Borsellino, G

2015-01-01

Ventricular arrhythmias are a leading cause of non-elegibility to competitive sport. The failure to detect a significant organic substrate in the initial stage of screening does not preclude the identification of structural pathologies in the follow-up by using advanced imaging techniques. Here we report the case of a senior athlete judged not elegible because an arrhythmia with the morphology consistent with the origin of the left ventricle, in which subsequent execution of a cardiac MR and a thoracic CT scan has allowed the identification of an unique association between an area of myocardial damage, probable site of origine of the arrhythma, and a rare aortic malformation.

Optical, x-ray and microwave diagnostics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tudisco, S.; Mascali, D.; Altana, C.

2013-07-26

Laser-driven ion acceleration is a new approach for the particles acceleration, which allows obtaining ion beams with unique properties, such as short burst duration, large particle number, small size source size, low transverse emittance. Currently, two main acceleration mechanisms have been identified and investigated: target normal sheath acceleration (TNSA) and radiation pressure acceleration (RPA). Electrons dynamics and energies are strongly coupled to these acceleration mechanisms and they can be investigated with optical and X-ray techniques. The main aim of these studies are the identification of few physical observables that can be directly correlated to the proton emission obtained (in termsmore » of reproducibility and intensity) in operations with different target material and structure and laser-target interaction parameters.« less

Transitioning Rationally Designed Catalytic Materials to Real 'Working' Catalysts Produced at Commercial Scale: Nanoparticle Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaidle, Joshua A.; Habas, Susan E.; Baddour, Frederick G.

Catalyst design, from idea to commercialization, requires multi-disciplinary scientific and engineering research and development over 10-20 year time periods. Historically, the identification of new or improved catalyst materials has largely been an empirical trial-and-error process. However, advances in computational capabilities (new tools and increased processing power) coupled with new synthetic techniques have started to yield rationally-designed catalysts with controlled nano-structures and tailored properties. This technological advancement represents an opportunity to accelerate the catalyst development timeline and to deliver new materials that outperform existing industrial catalysts or enable new applications, once a number of unique challenges associated with the scale-up ofmore » nano-structured materials are overcome.« less

The role of saliva in tick feeding.

PubMed

Francischetti, Ivo M B; Sa-Nunes, Anderson; Mans, Ben J; Santos, Isabel M; Ribeiro, Jose M C

2009-01-01

When attempting to feed on their hosts, ticks face the problem of host hemostasis (the vertebrate mechanisms that prevent blood loss), inflammation (that can produce itching or pain and thus initiate defensive behavior on their hosts) and adaptive immunity (by way of both cellular and humoral responses). Against these barriers, ticks evolved a complex and sophisticated pharmacological armamentarium, consisting of bioactive lipids and proteins, to assist blood feeding. Recent progress in transcriptome research has uncovered that hard ticks have hundreds of different proteins expressed in their salivary glands, the majority of which have no known function, and include many novel protein families (e.g., their primary structure is unique to ticks). This review will address the vertebrate mechanisms of these barriers as a guide to identify the possible targets of these large numbers of known salivary proteins with unknown function. We additionally provide a supplemental Table that catalogues over 3,500 putative salivary proteins from various tick species, which might assist the scientific community in the process of functional identification of these unique proteins. This supplemental file is accessble fromhttp://exon.niaid.nih.gov/transcriptome/tick_review/Sup-Table-1.xls.gz.

Invented Spelling, Word Stress, and Syllable Awareness in Relation to Reading Difficulties in Children.

PubMed

Mehta, Sheena; Ding, Yi; Ness, Molly; Chen, Eric C

2018-06-01

The study assessed the clinical utility of an invented spelling tool and determined whether invented spelling with linguistic manipulation at segmental and supra-segmental levels can be used to better identify reading difficulties. We conducted linguistic manipulation by using real and nonreal words, incorporating word stress, alternating the order of consonants and vowels, and alternating the number of syllables. We recruited 60 third-grade students, of which half were typical readers and half were poor readers. The invented spelling task consistently differentiated those with reading difficulties from typical readers. It explained unique variance in conventional spelling, but not in word reading. Word stress explained unique variance in both word reading and conventional spelling, highlighting the importance of addressing phonological awareness at the supra-segmental level. Poor readers had poorer performance when spelling both real and nonreal words and demonstrated substantial difficulty in detecting word stress. Poor readers struggled with spelling words with double consonants at the beginning and ending of words, and performed worse on spelling two- and three-syllable words than typical readers. Practical implications for early identification and instruction are discussed.

Identifying the necessary and sufficient number of risk factors for predicting academic failure.

PubMed

Lucio, Robert; Hunt, Elizabeth; Bornovalova, Marina

2012-03-01

Identifying the point at which individuals become at risk for academic failure (grade point average [GPA] < 2.0) involves an understanding of which and how many factors contribute to poor outcomes. School-related factors appear to be among the many factors that significantly impact academic success or failure. This study focused on 12 school-related factors. Using a thorough 5-step process, we identified which unique risk factors place one at risk for academic failure. Academic engagement, academic expectations, academic self-efficacy, homework completion, school relevance, school safety, teacher relationships (positive relationship), grade retention, school mobility, and school misbehaviors (negative relationship) were uniquely related to GPA even after controlling for all relevant covariates. Next, a receiver operating characteristic curve was used to determine a cutoff point for determining how many risk factors predict academic failure (GPA < 2.0). Results yielded a cutoff point of 2 risk factors for predicting academic failure, which provides a way for early identification of individuals who are at risk. Further implications of these findings are discussed. PsycINFO Database Record (c) 2012 APA, all rights reserved.

Ultraperformance convergence chromatography-high resolution tandem mass spectrometry for lipid biomarker profiling and identification.

PubMed

Jones, Jace W; Carter, Claire L; Li, Fei; Yu, Jianshi; Pierzchalski, Keely; Jackson, Isabel L; Vujaskovic, Zeljko; Kane, Maureen A

2017-03-01

Lipids represent biologically ubiquitous and highly dynamic molecules in terms of abundance and structural diversity. Whereas the potential for lipids to inform on disease/injury is promising, their unique characteristics make detection and identification of lipids from biological samples analytically demanding. We report the use of ultraperformance convergence chromatography (UPC 2 ), a variant of supercritical fluid chromatography, coupled to high-resolution, data-independent tandem mass spectrometry for characterization of total lipid extracts from mouse lung tissue. The UPC 2 platform resulted in lipid class separation and when combined with orthogonal column chemistries yielded chromatographic separation of intra-class species based on acyl chain hydrophobicity. Moreover, the combined approach of using UPC 2 with orthogonal column chemistries, accurate mass measurements, time-aligned low- and high-collision energy total ion chromatograms, and positive and negative ion mode product ion spectra correlation allowed for confident lipid identification. Of great interest was the identification of differentially expressed ceramides that were elevated 24 h post whole thorax lung irradiation. The identification of lipids that were elevated 24 h post-irradiation signifies a unique opportunity to investigate early mechanisms of action prior to the onset of clinical symptoms in the whole thorax lung irradiation mouse model. Copyright © 2016 John Wiley & Sons, Ltd.

EST-SSR marker revealed effective over biochemical and morphological scepticism towards identification of specific turmeric (Curcuma longa L.) cultivars.

PubMed

Sahoo, Ambika; Jena, Sudipta; Kar, Basudeba; Sahoo, Suprava; Ray, Asit; Singh, Subhashree; Joshi, Raj Kumar; Acharya, Laxmikanta; Nayak, Sanghamitra

2017-05-01

Turmeric (Curcuma longa L., family Zingiberaceae) is one of the most economically important plants for its use in food, medicine, and cosmetic industries. Cultivar identification is a major constraint in turmeric, owing to high degree of morphological similarity that in turn, affects its commercialization. The present study addresses this constraint, using EST-SSR marker based, molecular identification of 8 elite cultivars and 88 accessions in turmeric. Fifty EST-SSR primers were screened against eight cultivars of turmeric (Suroma, Roma, Lakadong, Megha, Alleppey Supreme, Kedaram, Pratibha, and Suvarna); out of which 11 primers showed polymorphic banding pattern. The polymorphic information content (PIC) of these primers ranged from 0.13 to 0.48. However, only three SSR loci (CSSR 14, CSSR 15, and CSSR 18) gave reproducible unique banding pattern clearly distinguishing the cultivars 'Lakadong' and 'Suvarna' from other cultivars tested. These three unique SSR markers also proved to be effective in identification of 'Lakadong' cultivars when analysed with 88 accessions of turmeric collected from different agro-climatic regions. Furthermore, two identified cultivars (Lakadong and Suvarna) could also be precisely differentiated when analysed and based on phylogenetic tree, with other 94 genotypes of turmeric. The novel SSR markers can be used for identification and authentication of two commercially important turmeric cultivars 'Lakadong' and 'Suvarna'.

Individual-specific antibody identification methods

DOEpatents

Francoeur, Ann -Michele

1989-11-14

An identification method, applicable to the identification of animals or inanimate objects, is described. The method takes advantage of a hithertofore unknown set of individual-specific, or IS antibodies, that are part of the unique antibody repertoire present in animals, by reacting an effective amount of IS antibodies with a particular panel, or n-dimensional array (where n is typically one or two) consisting of an effective amount of many different antigens (typically greater than one thousand), to give antibody-antigen complexes. The profile or pattern formed by the antigen-antibody complexes, termed an antibody fingerprint, when revealed by an effective amount of an appropriate detector molecule, is uniquely representative of a particular individual. The method can similarly by used to distinguish genetically, or otherwise similar individuals, or their body parts containing IS antibodies. Identification of inanimate objects, particularly security documents, is similarly affected by associating with the documents, an effective amount of a particular individual's IS antibodies, or conversely, a particular panel of antigens, and forming antibody-antigen complexes with a particular panel of antigens, or a particular individual's IS antibodies, respectively. One embodiment of the instant identification method, termed the blocked fingerprint assay, has applications in the area of allergy testing, autoimmune diagnostics and therapeutics, and the detection of environmental antigens such as pathogens, chemicals, and toxins.

RNA-Seq Based Transcriptional Map of Bovine Respiratory Disease Pathogen “Histophilus somni 2336”

PubMed Central

Kumar, Ranjit; Lawrence, Mark L.; Watt, James; Cooksey, Amanda M.; Burgess, Shane C.; Nanduri, Bindu

2012-01-01

Genome structural annotation, i.e., identification and demarcation of the boundaries for all the functional elements in a genome (e.g., genes, non-coding RNAs, proteins and regulatory elements), is a prerequisite for systems level analysis. Current genome annotation programs do not identify all of the functional elements of the genome, especially small non-coding RNAs (sRNAs). Whole genome transcriptome analysis is a complementary method to identify “novel” genes, small RNAs, regulatory regions, and operon structures, thus improving the structural annotation in bacteria. In particular, the identification of non-coding RNAs has revealed their widespread occurrence and functional importance in gene regulation, stress and virulence. However, very little is known about non-coding transcripts in Histophilus somni, one of the causative agents of Bovine Respiratory Disease (BRD) as well as bovine infertility, abortion, septicemia, arthritis, myocarditis, and thrombotic meningoencephalitis. In this study, we report a single nucleotide resolution transcriptome map of H. somni strain 2336 using RNA-Seq method. The RNA-Seq based transcriptome map identified 94 sRNAs in the H. somni genome of which 82 sRNAs were never predicted or reported in earlier studies. We also identified 38 novel potential protein coding open reading frames that were absent in the current genome annotation. The transcriptome map allowed the identification of 278 operon (total 730 genes) structures in the genome. When compared with the genome sequence of a non-virulent strain 129Pt, a disproportionate number of sRNAs (∼30%) were located in genomic region unique to strain 2336 (∼18% of the total genome). This observation suggests that a number of the newly identified sRNAs in strain 2336 may be involved in strain-specific adaptations. PMID:22276113

RNA-seq based transcriptional map of bovine respiratory disease pathogen "Histophilus somni 2336".

PubMed

Kumar, Ranjit; Lawrence, Mark L; Watt, James; Cooksey, Amanda M; Burgess, Shane C; Nanduri, Bindu

2012-01-01

Genome structural annotation, i.e., identification and demarcation of the boundaries for all the functional elements in a genome (e.g., genes, non-coding RNAs, proteins and regulatory elements), is a prerequisite for systems level analysis. Current genome annotation programs do not identify all of the functional elements of the genome, especially small non-coding RNAs (sRNAs). Whole genome transcriptome analysis is a complementary method to identify "novel" genes, small RNAs, regulatory regions, and operon structures, thus improving the structural annotation in bacteria. In particular, the identification of non-coding RNAs has revealed their widespread occurrence and functional importance in gene regulation, stress and virulence. However, very little is known about non-coding transcripts in Histophilus somni, one of the causative agents of Bovine Respiratory Disease (BRD) as well as bovine infertility, abortion, septicemia, arthritis, myocarditis, and thrombotic meningoencephalitis. In this study, we report a single nucleotide resolution transcriptome map of H. somni strain 2336 using RNA-Seq method.The RNA-Seq based transcriptome map identified 94 sRNAs in the H. somni genome of which 82 sRNAs were never predicted or reported in earlier studies. We also identified 38 novel potential protein coding open reading frames that were absent in the current genome annotation. The transcriptome map allowed the identification of 278 operon (total 730 genes) structures in the genome. When compared with the genome sequence of a non-virulent strain 129Pt, a disproportionate number of sRNAs (∼30%) were located in genomic region unique to strain 2336 (∼18% of the total genome). This observation suggests that a number of the newly identified sRNAs in strain 2336 may be involved in strain-specific adaptations.

Globally diverse Toxoplasma gondii isolates comprise six major clades originating from a small number of distinct ancestral lineages

PubMed Central

Su, Chunlei; Khan, Asis; Zhou, Peng; Majumdar, Debashree; Ajzenberg, Daniel; Dardé, Marie-Laure; Zhu, Xing-Quan; Ajioka, James W.; Rosenthal, Benjamin M.; Dubey, Jitender P.; Sibley, L. David

2012-01-01

Marked phenotypic variation characterizes isolates of Toxoplasma gondii, a ubiquitous zoonotic parasite that serves as an important experimental model for studying apicomplexan parasites. Progress in identifying the heritable basis for clinically and epidemiologically significant differences requires a robust system for describing and interpreting evolutionary subdivisions in this prevalent pathogen. To develop such a system, we have examined more than 950 isolates collected from around the world and genotyped them using three independent sets of polymorphic DNA markers, sampling 30 loci distributed across all nuclear chromosomes as well as the plastid genome. Our studies reveal a biphasic pattern consisting of regions in the Northern Hemisphere where a few, highly clonal and abundant lineages predominate; elsewhere, and especially in portions of South America are characterized by a diverse assemblage of less common genotypes that show greater evidence of recombination. Clustering methods were used to organize the marked genetic diversity of 138 unique genotypes into 15 haplogroups that collectively define six major clades. Analysis of gene flow indicates that a small number of ancestral lineages gave rise to the existing diversity through a process of limited admixture. Identification of reference strains for these major groups should facilitate future studies on comparative genomics and identification of genes that control important biological phenotypes including pathogenesis and transmission. PMID:22431627

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false EPA identification numbers. 761.202... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any generator, commercial storer, transporter, or disposer of PCB waste who is required to have an EPA...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 31 2014-07-01 2014-07-01 false EPA identification numbers. 761.202... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any generator, commercial storer, transporter, or disposer of PCB waste who is required to have an EPA...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 32 2013-07-01 2013-07-01 false EPA identification numbers. 761.202... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any generator, commercial storer, transporter, or disposer of PCB waste who is required to have an EPA...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

49 CFR 567.5 - Requirements for manufacturers of vehicles manufactured in two or more stages.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Vehicle Identification Number. (c) Intermediate manufacturers. (1) Except as provided in paragraphs (f... that identified by the incomplete vehicle manufacturer. (v) Vehicle identification number. (d) Final...), and (d)(1), and 49 CFR 568.4(a)(9). (vi) Vehicle identification number. (vii) The type classification...

49 CFR 599.302 - Dealer application for reimbursement-submission, contents.

Code of Federal Regulations, 2013 CFR

2013-10-01

... vehicle. (C) Model year. The model year of the vehicle. (D) Vehicle identification number (VIN). The 17... vehicle. (C) Model year. The model year of the vehicle. (D) Vehicle identification number (VIN). The 17... address of each purchaser. (C) Driver's license or State identification number. The State driver's license...

49 CFR 567.5 - Requirements for manufacturers of vehicles manufactured in two or more stages.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Vehicle Identification Number. (c) Intermediate manufacturers. (1) Except as provided in paragraphs (f... that identified by the incomplete vehicle manufacturer. (v) Vehicle identification number. (d) Final...), and (d)(1), and 49 CFR 568.4(a)(9). (vi) Vehicle identification number. (vii) The type classification...

49 CFR 567.5 - Requirements for manufacturers of vehicles manufactured in two or more stages.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Vehicle Identification Number. (c) Intermediate manufacturers. (1) Except as provided in paragraphs (f... that identified by the incomplete vehicle manufacturer. (v) Vehicle identification number. (d) Final...), and (d)(1), and 49 CFR 568.4(a)(9). (vi) Vehicle identification number. (vii) The type classification...

49 CFR 599.302 - Dealer application for reimbursement-submission, contents.

Code of Federal Regulations, 2012 CFR

2012-10-01

... vehicle. (C) Model year. The model year of the vehicle. (D) Vehicle identification number (VIN). The 17... vehicle. (C) Model year. The model year of the vehicle. (D) Vehicle identification number (VIN). The 17... address of each purchaser. (C) Driver's license or State identification number. The State driver's license...

49 CFR 599.302 - Dealer application for reimbursement-submission, contents.

Code of Federal Regulations, 2014 CFR

2014-10-01

... vehicle. (C) Model year. The model year of the vehicle. (D) Vehicle identification number (VIN). The 17... vehicle. (C) Model year. The model year of the vehicle. (D) Vehicle identification number (VIN). The 17... address of each purchaser. (C) Driver's license or State identification number. The State driver's license...

49 CFR 567.5 - Requirements for manufacturers of vehicles manufactured in two or more stages.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Vehicle Identification Number. (c) Intermediate manufacturers. (1) Except as provided in paragraphs (f... that identified by the incomplete vehicle manufacturer. (v) Vehicle identification number. (d) Final...), and (d)(1), and 49 CFR 568.4(a)(9). (vi) Vehicle identification number. (vii) The type classification...

77 FR 59575 - Hull Identification Numbers for Recreational Vessels

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 181 [Docket No. USCG-2012-0843] Hull Identification Numbers for Recreational Vessels AGENCY: Coast Guard, DHS. ACTION: Request for public comments... requirement to indicate a boat's model year as part of the 12-character Hull Identification Number (HIN...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any... identification number from EPA. (4) A disposer of PCB waste shall not accept any PCB waste for disposal without... disposal facility or mobile treatment unit shall not accept waste unless the disposer has received an EPA...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any generator, commercial storer, transporter, or disposer of PCB waste who is required to have an EPA identification number under this subpart must notify EPA of his/her PCB waste handling activities, using the...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

77 FR 36209 - Airworthiness Directives; Airbus Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-18

... number of the installed RAT actuator, and re-identification of the actuator and RAT, or replacement of the RAT actuator with a serviceable unit and re-identification of the RAT, if necessary. We are... number, and serial number of the installed RAT actuator, and re- identification of the actuator and RAT...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Vehicle Identification Number Information D Appendix D to Part 512 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...

Thermal Skin fabrication technology

NASA Technical Reports Server (NTRS)

Milam, T. B.

1972-01-01

Advanced fabrication techniques applicable to Thermal Skin structures were investigated, including: (1) chemical machining; (2) braze bonding; (3) diffusion bonding; and (4) electron beam welding. Materials investigated were nickel and nickel alloys. Sample Thermal Skin panels were manufactured using the advanced fabrication techniques studied and were structurally tested. Results of the program included: (1) development of improved chemical machining processes for nickel and several nickel alloys; (2) identification of design geometry limits; (3) identification of diffusion bonding requirements; (4) development of a unique diffusion bonding tool; (5) identification of electron beam welding limits; and (6) identification of structural properties of Thermal Skin material.

The School Professionals' Role in Identification of Youth at Risk of Suicide

ERIC Educational Resources Information Center

Crawford, Shelley; Caltabiano, Nerina J.

2009-01-01

The school professional is in a unique position to play a strategic role in the early identification and prevention of youth suicide. The current study assessed North Queensland teachers' knowledge on youth suicide. The sample comprised 201 secondary school teachers. A survey research design was used and data was collected using a…

Detection of medically important Candida species by absolute quantitation real-time polymerase chain reaction.

PubMed

Than, Leslie Thian Lung; Chong, Pei Pei; Ng, Kee Peng; Seow, Heng Fong

2015-01-01

The number of invasive candidiasis cases has risen especially with an increase in the number of immunosuppressed and immunocom promised patients. The early detection of Candida species which is specific and sensitive is important in determining the correct administration of antifungal drugs to patients. This study aims to develop a method for the detection, identification and quantitation of medically important Candida species through quantitative polymerase chain reaction (qPCR). The isocitrate lyase (ICL) gene which is not found in mammals was chosen as the target gene of real-time PCR. Absolute quantitation of the gene copy number was achieved by constructing the plasmid containing the ICL gene which is used to generate standard curve. Twenty fungal species, two bacterial species and human DNA were tested to check the specificity of the detection method. All eight Candida species were successfully detected, identified and quantitated based on the ICL gene. A seven-log range of the gene copy number and a minimum detection limit of 10(3) copies were achieved. A one-tube absolute quantification real-time PCR that differentiates medically important Candida species via individual unique melting temperature was achieved. Analytical sensitivity and specificity were not compromised.

Of earprints, fingerprints, scent dogs, cot deaths and cognitive contamination--a brief look at the present state of play in the forensic arena.

PubMed

Broeders, A P A

2006-06-02

Over the last decades, the importance of technical and scientific evidence for the criminal justice system has been steadily increasing. Unfortunately, the weight of forensic evidence is not always easy for the trier of fact to assess, as appears from a brief discussion of some recent cases in which the weight of expert evidence was either grossly over- or understated. Also, in recent years, questions surrounding the value of forensic evidence have played a major role in the appeal and revision stages of a number of highly publicized criminal cases in several countries, including the UK and the Netherlands. Some of the present confusion is caused by the different ways in which conclusions are formulated by experts working within the traditional approach to forensic identification, as exemplified by (1) dactyloscopy and (2) the other traditional forensic identification disciplines like handwriting analysis, firearms analysis and fibre analysis, as opposed to those working within the modern scientific approach used in forensic DNA analysis. Though most clearly expressed in the way conclusions are formulated within the diverse fields, these differences essentially reflect the scientific paradigms underlying the various identification disciplines. The types of conclusions typically formulated by practitioners of the traditional identification disciplines are seen to be directly related to the two major principles underpinning traditional identification science, i.e. the uniqueness assumption and the individualization principle. The latter of these is shown to be particularly problematic, especially when carried to its extreme, as embodied in the positivity doctrine, which is almost universally embraced by the dactyloscopy profession and allows categorical identification only. Apart from issues arising out of the interpretation of otherwise valid expert evidence there is growing concern over the validity and reliability of the expert evidence submitted to courts. While in various countries including the USA, Canada and the Netherlands criteria have been introduced which may be used as a form of input or output control on expert evidence, in England and Wales expert evidence is much less likely to be subject to forms of admissibility or reliability testing. Finally, a number of measures are proposed which may go some way to address some of the present concerns over the evaluation of technical and scientific evidence.

Identification of serial number on bank card using recurrent neural network

NASA Astrophysics Data System (ADS)

Liu, Li; Huang, Linlin; Xue, Jian

2018-04-01

Identification of serial number on bank card has many applications. Due to the different number printing mode, complex background, distortion in shape, etc., it is quite challenging to achieve high identification accuracy. In this paper, we propose a method using Normalization-Cooperated Gradient Feature (NCGF) and Recurrent Neural Network (RNN) based on Long Short-Term Memory (LSTM) for serial number identification. The NCGF maps the gradient direction elements of original image to direction planes such that the RNN with direction planes as input can recognize numbers more accurately. Taking the advantages of NCGF and RNN, we get 90%digit string recognition accuracy.

Can NMR solve some significant challenges in metabolomics?

PubMed

Nagana Gowda, G A; Raftery, Daniel

2015-11-01

The field of metabolomics continues to witness rapid growth driven by fundamental studies, methods development, and applications in a number of disciplines that include biomedical science, plant and nutrition sciences, drug development, energy and environmental sciences, toxicology, etc. NMR spectroscopy is one of the two most widely used analytical platforms in the metabolomics field, along with mass spectrometry (MS). NMR's excellent reproducibility and quantitative accuracy, its ability to identify structures of unknown metabolites, its capacity to generate metabolite profiles using intact bio-specimens with no need for separation, and its capabilities for tracing metabolic pathways using isotope labeled substrates offer unique strengths for metabolomics applications. However, NMR's limited sensitivity and resolution continue to pose a major challenge and have restricted both the number and the quantitative accuracy of metabolites analyzed by NMR. Further, the analysis of highly complex biological samples has increased the demand for new methods with improved detection, better unknown identification, and more accurate quantitation of larger numbers of metabolites. Recent efforts have contributed significant improvements in these areas, and have thereby enhanced the pool of routinely quantifiable metabolites. Additionally, efforts focused on combining NMR and MS promise opportunities to exploit the combined strength of the two analytical platforms for direct comparison of the metabolite data, unknown identification and reliable biomarker discovery that continue to challenge the metabolomics field. This article presents our perspectives on the emerging trends in NMR-based metabolomics and NMR's continuing role in the field with an emphasis on recent and ongoing research from our laboratory. Copyright © 2015 Elsevier Inc. All rights reserved.

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

Event identification by acoustic signature recognition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dress, W.B.; Kercel, S.W.

1995-07-01

Many events of interest to the security commnnity produce acoustic emissions that are, in principle, identifiable as to cause. Some obvious examples are gunshots, breaking glass, takeoffs and landings of small aircraft, vehicular engine noises, footsteps (high frequencies when on gravel, very low frequencies. when on soil), and voices (whispers to shouts). We are investigating wavelet-based methods to extract unique features of such events for classification and identification. We also discuss methods of classification and pattern recognition specifically tailored for acoustic signatures obtained by wavelet analysis. The paper is divided into three parts: completed work, work in progress, and futuremore » applications. The completed phase has led to the successful recognition of aircraft types on landing and takeoff. Both small aircraft (twin-engine turboprop) and large (commercial airliners) were included in the study. The project considered the design of a small, field-deployable, inexpensive device. The techniques developed during the aircraft identification phase were then adapted to a multispectral electromagnetic interference monitoring device now deployed in a nuclear power plant. This is a general-purpose wavelet analysis engine, spanning 14 octaves, and can be adapted for other specific tasks. Work in progress is focused on applying the methods previously developed to speaker identification. Some of the problems to be overcome include recognition of sounds as voice patterns and as distinct from possible background noises (e.g., music), as well as identification of the speaker from a short-duration voice sample. A generalization of the completed work and the work in progress is a device capable of classifying any number of acoustic events-particularly quasi-stationary events such as engine noises and voices and singular events such as gunshots and breaking glass. We will show examples of both kinds of events and discuss their recognition likelihood.« less

26 CFR 41.6001-2 - Proof of payment for State registration purposes.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section, the vehicle identification number of the vehicle being registered must appear on the Schedule 1... of the vehicles (or their vehicle identification numbers) is not required as part of such proof of... not include a list of vehicle identification numbers is submitted as proof of payment for the...

26 CFR 41.6001-2 - Proof of payment for State registration purposes.

Code of Federal Regulations, 2011 CFR

2011-04-01

... section, the vehicle identification number of the vehicle being registered must appear on the Schedule 1... of the vehicles (or their vehicle identification numbers) is not required as part of such proof of... not include a list of vehicle identification numbers is submitted as proof of payment for the...

33 CFR 181.27 - Information displayed near hull identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Information displayed near hull... displayed near hull identification number. With the exception of the characters “US-”, which constitute the... the 12-character hull identification number (HIN), that information must be separated from the HIN by...

33 CFR 187.321 - What are the hull identification number (HIN) provisions?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What are the hull identification number (HIN) provisions? 187.321 Section 187.321 Navigation and Navigable Waters COAST GUARD, DEPARTMENT... Vessel Titling Systems § 187.321 What are the hull identification number (HIN) provisions? A State must...

24 CFR 884.117 - Disclosure and verification of Social Security and Employer Identification Numbers by owners.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers by owners. 884.117 Section 884.117 Housing and Urban... PROJECTS Applicability, Scope and Basic Policies § 884.117 Disclosure and verification of Social Security... Social Security and Employer Identification Numbers, as provided by 24 CFR part 5. (Approved by the...

25 CFR 542.11 - What are the minimum internal control standards for pari-mutuel wagering?

Code of Federal Regulations, 2011 CFR

2011-04-01

...; (ii) Gaming operation name (or identification number) and station number; (iii) Race track, race number, horse identification or event identification, as applicable; (iv) Type of bet(s), each bet amount... wagering on race events while on duty, including during break periods. (g) Computer reports standards. (1...

Comparative proteomic analysis of somatic embryo maturation in Carica papaya L.

PubMed Central

2014-01-01

Background Somatic embryogenesis is a complex process regulated by numerous factors. The identification of proteins that are differentially expressed during plant development could result in the development of molecular markers of plant metabolism and provide information contributing to the monitoring and understanding of different biological responses. In addition, the identification of molecular markers could lead to the optimization of protocols allowing the use of biotechnology for papaya propagation and reproduction. This work aimed to investigate the effects of polyethylene glycol (PEG) on somatic embryo development and the protein expression profile during somatic embryo maturation in papaya (Carica papaya L.). Results The maturation treatment supplemented with 6% PEG (PEG6) resulted in the greatest number of somatic embryos and induced differential protein expression compared with cultures grown under the control treatment. Among 135 spots selected for MS/MS analysis, 76 spots were successfully identified, 38 of which were common to both treatments, while 14 spots were unique to the control treatment, and 24 spots were unique to the PEG6 treatment. The identified proteins were assigned to seven categories or were unclassified. The most representative class of proteins observed in the control treatment was associated with the stress response (25.8%), while those under PEG6 treatment were carbohydrate and energy metabolism (18.4%) and the stress response (18.4%). Conclusions The differential expression of three proteins (enolase, esterase and ADH3) induced by PEG6 treatment could play an important role in maturation, and these proteins could be characterized as candidate biomarkers of somatic embryogenesis in papaya. PMID:25076862

49 CFR 565.10 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

49 CFR 565.10 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

49 CFR 565.10 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

49 CFR 565.10 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

49 CFR 565.10 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

Application of 3D models of palatal rugae to personal identification: hints at identification from 3D-3D superimposition techniques.

PubMed

Gibelli, Daniele; De Angelis, Danilo; Pucciarelli, Valentina; Riboli, Francesco; Ferrario, Virgilio F; Dolci, Claudia; Sforza, Chiarella; Cattaneo, Cristina

2017-11-20

Palatal rugae are known in literature as individualizing anatomical structures with a strong potential for personal identification. However, a 3D assessment of their uniqueness has not yet been performed. The present study aims at verifying the uniqueness of 3D models of the palate. Twenty-six subjects were recruited among the orthodontic patients of a private dental office; from every patient, at least two dental casts were taken in different time periods, for a total of 62 casts. Dental casts were digitized by a 3D laser scanner (iSeries, Dental Wings©, Montreal, Canada). The palatal area was identified, and a series of 250 superimpositions was then performed automatically through VAM©software in order to reach the minimum point-to point distance between two models. In 36 matches the models belonged to the same individual, whereas in 214 mismatches they came from different subjects. The RMS (root mean square) of point-to-point distances was then calculated by 3D software. Possible statistically significant differences were assessed through Mann-Whitney test (p < 0.05). Results showed a statistically significant difference in RMS mean point-to-point distance between matches (mean 0.26 mm; SD 0.12) and mismatches (mean 1.30; SD 0.44) (p < 0.0001).All matches reached an RMS value below 0.50 mm. This study first provided an assessment of uniqueness of palatal rugae, based on their anatomical 3D conformations, with consequent applications to personal identification.

The zebrafish as a model system to study cardiovascular development.

PubMed

Stainier, D Y; Fishman, M C

1994-01-01

The zebrafish, Brachydanio rerio, is rapidly becoming a system of choice for vertebrate developmental biologists. It presents unique embryological attributes and is amenable to saturation style mutagenesis, a powerful approach that, in invertebrates, has already led to the identification of a large number of key developmental genes. Since fertilization is external, the zebrafish embryo develops in the dish and is thus accessible for continued observation and manipulation at all stages of development. Furthermore, because the embryo is transparent, the developing heart and vessels can be resolved at the single-cell level. A large number of mutations that affect the development of cardiovascular form and function have recently been isolated from large-scale genetic screens for zygotic embryonic lethals. Our further understanding of the development of the cardiovascular system is important not only because of the high incidence, and familial inheritance, of congenital abnormalities, but also because it should lead to novel, differentiation-based strategies for the analysis and therapy of the diseased state. Copyright © 1994. Published by Elsevier Inc.

Recent development of mass spectrometry and proteomics applications in identification and typing of bacteria

PubMed Central

Chui, Huixia; Domish, Larissa; Hernandez, Drexler; Wang, Gehua

2016-01-01

Identification and typing of bacteria occupy a large fraction of time and work in clinical microbiology laboratories. With the certification of some MS platforms in recent years, more applications and tests of MS‐based diagnosis methods for bacteria identification and typing have been created, not only on well‐accepted MALDI‐TOF‐MS‐based fingerprint matches, but also on solving the insufficiencies of MALDI‐TOF‐MS‐based platforms and advancing the technology to areas such as targeted MS identification and typing of bacteria, bacterial toxin identification, antibiotics susceptibility/resistance tests, and MS‐based diagnostic method development on unique bacteria such as Clostridium and Mycobacteria. This review summarizes the recent development in MS platforms and applications in bacteria identification and typing of common pathogenic bacteria. PMID:26751976

Implant bone integration importance in forensic identification.

PubMed

De Angelis, Danilo; Cattaneo, Cristina

2015-03-01

Odontological identification consists of the comparison of antemortem dental information regarding a missing person with postmortem data from an unidentified corpse or human remains. Usually, the comparison concerns morphologic features that the operator chooses among all the visible characteristics because of inter-individual uniqueness; for this reason, implants can be of enormous assistance. A case concerning the recovery of a burnt oral implant, connected to a bone fragment, among 2780 charred bone fragments, suspected to have belonged to a victim of homicide, is presented to demonstrate that dental implants and their site of bone integration represent a very precious element for personal forensic identification. Because of their morphological invariability in time and because of their morphologic uniqueness, they were used as evidence to associate unidentified human charred remains to a missing person where DNA analysis failed to do so. The case illustrates the fundamental contribution, not yet described in literature, given by the clinical aspects of tooth replacement with dental implants to a forensic discipline. Clinical practitioners should therefore be aware of the great importance of their work and of dental records in a forensic identification scenario. © 2014 American Academy of Forensic Sciences.

Unique disease heritage of the Dutch-German Mennonite population.

PubMed

Orton, Noelle C; Innes, A Micheil; Chudley, Albert E; Bech-Hansen, N Torben

2008-04-15

The Dutch-German Mennonites are a religious isolate with foundational roots in the 16th century. A tradition of endogamy, large families, detailed genealogical records, and a unique disease history all contribute to making this a valuable population for genetic studies. Such studies in the Dutch-German Mennonite population have already contributed to the identification of the causative genes in several conditions such as the incomplete form of X-linked congenital stationary night blindness (CSNB2; previously iCSNB) and hypophosphatasia (HOPS), as well as the discovery of founder mutations within established disease genes (MYBPC1, CYP17alpha). The Dutch-German Mennonite population provides a strong resource for gene discovery and could lead to the identification of additional disease genes with relevance to the general population. In addition, further research developments should enhance delivery of clinical genetic services to this unique community. In the current review we discuss 31 genetic conditions, including 17 with identified gene mutations, within the Dutch-German Mennonite population. Copyright 2008 Wiley-Liss, Inc.

Molecular identification of Armillaria gallica from the Niobrara Valley Preserve in Nebraska

Treesearch

Mee-Sook Kim; Ned B. Klopfenstein

2011-01-01

Armillaria isolates were collected from a unique forest ecosystem in the Niobrara Valley Preserve in Nebraska, USA, which comprises a glacial and early postglacial refugium in the central plains of North America. The isolates were collected from diverse forest trees representing a unique mixture of forest types. Combined methods of rDNA sequencing and flow cytometric...

Medical Operations Centers: Duplication or a Needed Innovation?

DTIC Science & Technology

2009-12-01

II. THE CURRENT MEDICAL SYSTEM A. MEDICAL SYSTEM COMPONENTS The definition or identification of which agencies, organizations, and businesses ... businesses —each with its unique contribution to medical care and each with its unique role in preparedness and emergency response. Perhaps the Oklahoma City...look at some hospital statistics will illuminate the financial woes experienced by all medical providers attempting to collect

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

Investigating lexical competition and the cost of phonemic restoration.

PubMed

Balling, Laura Winther; Morris, David Jackson; Tøndering, John

2017-12-01

Due to phonemic restoration, listeners can reliably perceive words when a phoneme is replaced with noise. The cost associated with this process was investigated along with the effect of lexical uniqueness on phonemic restoration, using data from a lexical decision experiment where noise replaced phonemes that were either uniqueness points (the phoneme at which a word deviates from all nonrelated words that share the same onset) or phonemes immediately prior to these. A baseline condition was also included with no noise-interrupted stimuli. Results showed a significant cost of phonemic restoration, with 100 ms longer word identification times and a 14% decrease in word identification accuracy for interrupted stimuli compared to the baseline. Regression analysis of response times from the interrupted conditions showed no effect of whether the interrupted phoneme was a uniqueness point, but significant effects for several temporal attributes of the stimuli, including the duration and position of the interrupted segment. These results indicate that uniqueness points are not distinct breakpoints in the cohort reduction that occurs during lexical processing, but that temporal properties of the interrupted stimuli are central to auditory word recognition. These results are interpreted in the context of models of speech perception.

49 CFR 565.20 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS Alternative VIN... and physical requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of...

49 CFR 565.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS General... requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

49 CFR 565.1 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS General... requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

49 CFR 565.20 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS Alternative VIN... and physical requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of...

49 CFR 565.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS General... requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

49 CFR 565.20 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS Alternative VIN... and physical requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of...

49 CFR 565.20 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS Alternative VIN... and physical requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of...

49 CFR 565.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS General... requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

49 CFR 565.20 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS Alternative VIN... and physical requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of...

49 CFR 565.1 - Purpose and scope.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS General... requirements for a vehicle identification number (VIN) system and its installation to simplify vehicle identification information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns. ...

The Numbers Game: A Values Clarification Strategy

ERIC Educational Resources Information Center

Ognibene, Richard; Winter, Cynthia

1976-01-01

After completing personal identification forms consisting only of numbers (phone number, Social Security number, etc.), students discuss the need for more personal means of identification within society in order for people to feel a useful sense of identity. (AV)

Oligo Design: a computer program for development of probes for oligonucleotide microarrays.

PubMed

Herold, Keith E; Rasooly, Avraham

2003-12-01

Oligonucleotide microarrays have demonstrated potential for the analysis of gene expression, genotyping, and mutational analysis. Our work focuses primarily on the detection and identification of bacteria based on known short sequences of DNA. Oligo Design, the software described here, automates several design aspects that enable the improved selection of oligonucleotides for use with microarrays for these applications. Two major features of the program are: (i) a tiling algorithm for the design of short overlapping temperature-matched oligonucleotides of variable length, which are useful for the analysis of single nucleotide polymorphisms and (ii) a set of tools for the analysis of multiple alignments of gene families and related short DNA sequences, which allow for the identification of conserved DNA sequences for PCR primer selection and variable DNA sequences for the selection of unique probes for identification. Note that the program does not address the full genome perspective but, instead, is focused on the genetic analysis of short segments of DNA. The program is Internet-enabled and includes a built-in browser and the automated ability to download sequences from GenBank by specifying the GI number. The program also includes several utilities, including audio recital of a DNA sequence (useful for verifying sequences against a written document), a random sequence generator that provides insight into the relationship between melting temperature and GC content, and a PCR calculator.

Stress-Strain Characterization for Reversed Loading Path and Constitutive Modeling for AHSS Springback Predictions

NASA Astrophysics Data System (ADS)

Zhu, Hong; Huang, Mai; Sadagopan, Sriram; Yao, Hong

2017-09-01

With increasing vehicle fuel economy standards, automotive OEMs are widely using various AHSS grades including DP, TRIP, CP and 3rd Gen AHSS to reduce vehicle weight due to their good combination of strength and formability. As one of enabling technologies for AHSS application, the requirement for requiring accurate prediction of springback for cold stamped AHSS parts stimulated a large number of investigations in the past decade with reversed loading path at large strains followed by constitutive modeling. With a spectrum of complex loading histories occurring in production stamping processes, there were many challenges in this field including issues of test data reliability, loading path representability, constitutive model robustness and non-unique constitutive parameter-identification. In this paper, various testing approaches and constitutive modeling will be reviewed briefly and a systematic methodology from stress-strain characterization, constitutive model parameter identification for material card generation will be presented in order to support automotive OEM’s need on virtual stamping. This systematic methodology features a tension-compression test at large strain with robust anti-buckling device with concurrent friction force correction, properly selected loading paths to represent material behavior during different springback modes as well as the 10-parameter Yoshida model with knowledge-based parameter-identification through nonlinear optimization. Validation cases for lab AHSS parts will also be discussed to check applicability of this methodology.

A Novel Proteomics Approach to Identify SUMOylated Proteins and Their Modification Sites in Human Cells*

PubMed Central

Galisson, Frederic; Mahrouche, Louiza; Courcelles, Mathieu; Bonneil, Eric; Meloche, Sylvain; Chelbi-Alix, Mounira K.; Thibault, Pierre

2011-01-01

The small ubiquitin-related modifier (SUMO) is a small group of proteins that are reversibly attached to protein substrates to modify their functions. The large scale identification of protein SUMOylation and their modification sites in mammalian cells represents a significant challenge because of the relatively small number of in vivo substrates and the dynamic nature of this modification. We report here a novel proteomics approach to selectively enrich and identify SUMO conjugates from human cells. We stably expressed different SUMO paralogs in HEK293 cells, each containing a His6 tag and a strategically located tryptic cleavage site at the C terminus to facilitate the recovery and identification of SUMOylated peptides by affinity enrichment and mass spectrometry. Tryptic peptides with short SUMO remnants offer significant advantages in large scale SUMOylome experiments including the generation of paralog-specific fragment ions following CID and ETD activation, and the identification of modified peptides using conventional database search engines such as Mascot. We identified 205 unique protein substrates together with 17 precise SUMOylation sites present in 12 SUMO protein conjugates including three new sites (Lys-380, Lys-400, and Lys-497) on the protein promyelocytic leukemia. Label-free quantitative proteomics analyses on purified nuclear extracts from untreated and arsenic trioxide-treated cells revealed that all identified SUMOylated sites of promyelocytic leukemia were differentially SUMOylated upon stimulation. PMID:21098080

Error-Detecting Identification Codes for Algebra Students.

ERIC Educational Resources Information Center

Sutherland, David C.

1990-01-01

Discusses common error-detecting identification codes using linear algebra terminology to provide an interesting application of algebra. Presents examples from the International Standard Book Number, the Universal Product Code, bank identification numbers, and the ZIP code bar code. (YP)

A comparison of the performance of seven key bibliographic databases in identifying all relevant systematic reviews of interventions for hypertension.

PubMed

Rathbone, John; Carter, Matt; Hoffmann, Tammy; Glasziou, Paul

2016-02-09

Bibliographic databases are the primary resource for identifying systematic reviews of health care interventions. Reliable retrieval of systematic reviews depends on the scope of indexing used by database providers. Therefore, searching one database may be insufficient, but it is unclear how many need to be searched. We sought to evaluate the performance of seven major bibliographic databases for the identification of systematic reviews for hypertension. We searched seven databases (Cochrane library, Database of Abstracts of Reviews of Effects (DARE), Excerpta Medica Database (EMBASE), Epistemonikos, Medical Literature Analysis and Retrieval System Online (MEDLINE), PubMed Health and Turning Research Into Practice (TRIP)) from 2003 to 2015 for systematic reviews of any intervention for hypertension. Citations retrieved were screened for relevance, coded and checked for screening consistency using a fuzzy text matching query. The performance of each database was assessed by calculating its sensitivity, precision, the number of missed reviews and the number of unique records retrieved. Four hundred systematic reviews were identified for inclusion from 11,381 citations retrieved from seven databases. No single database identified all the retrieved systematic reviews for hypertension. EMBASE identified the most reviews (sensitivity 69 %) but also retrieved the most irrelevant citations with 7.2 % precision (Pr). The sensitivity of the Cochrane library was 60 %, DARE 57 %, MEDLINE 57 %, PubMed Health 53 %, Epistemonikos 49 % and TRIP 33 %. EMBASE contained the highest number of unique records (n = 43). The Cochrane library identified seven unique records and had the highest precision (Pr = 30 %), followed by Epistemonikos (n = 2, Pr = 19 %). No unique records were found in PubMed Health (Pr = 24 %) DARE (Pr = 21 %), TRIP (Pr = 10 %) or MEDLINE (Pr = 10 %). Searching EMBASE and the Cochrane library identified 88 % of all systematic reviews in the reference set, and searching the freely available databases (Cochrane, Epistemonikos, MEDLINE) identified 83 % of all the reviews. The databases were re-analysed after systematic reviews of non-conventional interventions (e.g. yoga, acupuncture) were removed. Similarly, no database identified all the retrieved systematic reviews. EMBASE identified the most relevant systematic reviews (sensitivity 73 %) but also retrieved the most irrelevant citations with Pr = 5 %. The sensitivity of the Cochrane database was 62 %, followed by MEDLINE (60 %), DARE (55 %), PubMed Health (54 %), Epistemonikos (50 %) and TRIP (31 %). The precision of the Cochrane library was the highest (20 %), followed by PubMed Health (Pr = 16 %), DARE (Pr = 13 %), Epistemonikos (Pr = 12 %), MEDLINE (Pr = 6 %), TRIP (Pr = 6 %) and EMBASE (Pr = 5 %). EMBASE contained the most unique records (n = 34). The Cochrane library identified seven unique records. The other databases held no unique records. The coverage of bibliographic databases varies considerably due to differences in their scope and content. Researchers wishing to identify systematic reviews should not rely on one database but search multiple databases.

Frontal sinus recognition for human identification

NASA Astrophysics Data System (ADS)

Falguera, Juan Rogelio; Falguera, Fernanda Pereira Sartori; Marana, Aparecido Nilceu

2008-03-01

Many methods based on biometrics such as fingerprint, face, iris, and retina have been proposed for person identification. However, for deceased individuals, such biometric measurements are not available. In such cases, parts of the human skeleton can be used for identification, such as dental records, thorax, vertebrae, shoulder, and frontal sinus. It has been established in prior investigations that the radiographic pattern of frontal sinus is highly variable and unique for every individual. This has stimulated the proposition of measurements of the frontal sinus pattern, obtained from x-ray films, for skeletal identification. This paper presents a frontal sinus recognition method for human identification based on Image Foresting Transform and shape context. Experimental results (ERR = 5,82%) have shown the effectiveness of the proposed method.

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2011 CFR

2011-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2010 CFR

2010-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2012 CFR

2012-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2014 CFR

2014-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2013 CFR

2013-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

In-depth analysis of protein inference algorithms using multiple search engines and well-defined metrics.

PubMed

Audain, Enrique; Uszkoreit, Julian; Sachsenberg, Timo; Pfeuffer, Julianus; Liang, Xiao; Hermjakob, Henning; Sanchez, Aniel; Eisenacher, Martin; Reinert, Knut; Tabb, David L; Kohlbacher, Oliver; Perez-Riverol, Yasset

2017-01-06

In mass spectrometry-based shotgun proteomics, protein identifications are usually the desired result. However, most of the analytical methods are based on the identification of reliable peptides and not the direct identification of intact proteins. Thus, assembling peptides identified from tandem mass spectra into a list of proteins, referred to as protein inference, is a critical step in proteomics research. Currently, different protein inference algorithms and tools are available for the proteomics community. Here, we evaluated five software tools for protein inference (PIA, ProteinProphet, Fido, ProteinLP, MSBayesPro) using three popular database search engines: Mascot, X!Tandem, and MS-GF+. All the algorithms were evaluated using a highly customizable KNIME workflow using four different public datasets with varying complexities (different sample preparation, species and analytical instruments). We defined a set of quality control metrics to evaluate the performance of each combination of search engines, protein inference algorithm, and parameters on each dataset. We show that the results for complex samples vary not only regarding the actual numbers of reported protein groups but also concerning the actual composition of groups. Furthermore, the robustness of reported proteins when using databases of differing complexities is strongly dependant on the applied inference algorithm. Finally, merging the identifications of multiple search engines does not necessarily increase the number of reported proteins, but does increase the number of peptides per protein and thus can generally be recommended. Protein inference is one of the major challenges in MS-based proteomics nowadays. Currently, there are a vast number of protein inference algorithms and implementations available for the proteomics community. Protein assembly impacts in the final results of the research, the quantitation values and the final claims in the research manuscript. Even though protein inference is a crucial step in proteomics data analysis, a comprehensive evaluation of the many different inference methods has never been performed. Previously Journal of proteomics has published multiple studies about other benchmark of bioinformatics algorithms (PMID: 26585461; PMID: 22728601) in proteomics studies making clear the importance of those studies for the proteomics community and the journal audience. This manuscript presents a new bioinformatics solution based on the KNIME/OpenMS platform that aims at providing a fair comparison of protein inference algorithms (https://github.com/KNIME-OMICS). Six different algorithms - ProteinProphet, MSBayesPro, ProteinLP, Fido and PIA- were evaluated using the highly customizable workflow on four public datasets with varying complexities. Five popular database search engines Mascot, X!Tandem, MS-GF+ and combinations thereof were evaluated for every protein inference tool. In total >186 proteins lists were analyzed and carefully compare using three metrics for quality assessments of the protein inference results: 1) the numbers of reported proteins, 2) peptides per protein, and the 3) number of uniquely reported proteins per inference method, to address the quality of each inference method. We also examined how many proteins were reported by choosing each combination of search engines, protein inference algorithms and parameters on each dataset. The results show that using 1) PIA or Fido seems to be a good choice when studying the results of the analyzed workflow, regarding not only the reported proteins and the high-quality identifications, but also the required runtime. 2) Merging the identifications of multiple search engines gives almost always more confident results and increases the number of peptides per protein group. 3) The usage of databases containing not only the canonical, but also known isoforms of proteins has a small impact on the number of reported proteins. The detection of specific isoforms could, concerning the question behind the study, compensate for slightly shorter reports using the parsimonious reports. 4) The current workflow can be easily extended to support new algorithms and search engine combinations. Copyright © 2016. Published by Elsevier B.V.

Development of a Master Health Facility List in Nigeria

PubMed Central

Azeez, Aderemi; Bamidele, Samson; Oyemakinde, Akin; Oyediran, Kolawole Azeez; Adebayo, Wura; Fapohunda, Bolaji; Abioye, Abimbola; Mullen, Stephanie

2014-01-01

Abstract Introduction Routine Health Information Systems (RHIS) are increasingly transitioning to electronic platforms in several developing countries. Establishment of a Master Facility List (MFL) to standardize the allocation of unique identifiers for health facilities can overcome identification issues and support health facility management. The Nigerian Federal Ministry of Health (FMOH) recently developed a MFL, and we present the process and outcome. Methods The MFL was developed from the ground up, and includes a state code, a local government area (LGA) code, health facility ownership (public or private), the level of care, and an exclusive LGA level health facility serial number, as part of the unique identifier system in Nigeria. To develop the MFL, the LGAs sent the list of all health facilities in their jurisdiction to the state, which in turn collated for all LGAs under them before sending to the FMOH. At the FMOH, a group of RHIS experts verified the list and identifiers for each state. Results The national MFL consists of 34,423 health facilities uniquely identified. The list has been published and is available for worldwide access; it is currently used for planning and management of health services in Nigeria. Discussion Unique identifiers are a basic component of any information system. However, poor planning and execution of implementing this key standard can diminish the success of the RHIS. Conclusion Development and adherence to standards is the hallmark for a national health information infrastructure. Explicit processes and multi-level stakeholder engagement is necessary to ensuring the success of the effort. PMID:25422720

24 CFR 5.212 - Compliance with the Privacy Act and other requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income... SSNs and Employer Identification Numbers (EINs), and income information under this subpart shall be...

A rapid, one step molecular identification of Trichoderma citrinoviride and Trichoderma reesei.

PubMed

Saroj, Dina B; Dengeti, Shrinivas N; Aher, Supriya; Gupta, Anil K

2015-06-01

Trichoderma species are widely used as production hosts for industrial enzymes. Identification of Trichoderma species requires a complex molecular biology based identification involving amplification and sequencing of multiple genes. Industrial laboratories are required to run identification tests repeatedly in cell banking procedures and also to prove absence of production host in the product. Such demands can be fulfilled by a brief method which enables confirmation of strain identity. This communication describes one step identification method for two common Trichoderma species; T. citrinoviride and T. reesei, based on identification of polymorphic region in the nucleotide sequence of translation elongation factor 1 alpha. A unique forward primer and common reverse primer resulted in 153 and 139 bp amplicon for T. citrinoviride and T. reesei, respectively. Simplification was further introduced by using mycelium as template for PCR amplification. Method described in this communication allows rapid, one step identification of two Trichoderma species.

Autonomous intelligent assembly systems LDRD 105746 final report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Robert J.

2013-04-01

This report documents a three-year to develop technology that enables mobile robots to perform autonomous assembly tasks in unstructured outdoor environments. This is a multi-tier problem that requires an integration of a large number of different software technologies including: command and control, estimation and localization, distributed communications, object recognition, pose estimation, real-time scanning, and scene interpretation. Although ultimately unsuccessful in achieving a target brick stacking task autonomously, numerous important component technologies were nevertheless developed. Such technologies include: a patent-pending polygon snake algorithm for robust feature tracking, a color grid algorithm for uniquely identification and calibration, a command and control frameworkmore » for abstracting robot commands, a scanning capability that utilizes a compact robot portable scanner, and more. This report describes this project and these developed technologies.« less

Multifunctional Quantum Dots for Personalized Medicine

PubMed Central

Zrazhevskiy, Pavel; Gao, Xiaohu

2009-01-01

Successes in biomedical research and state-of-the-art medicine have undoubtedly improved the quality of life. However, a number of diseases, such as cancer, immunodeficiencies, and neurological disorders, still evade conventional diagnostic and therapeutic approaches. A transformation towards personalized medicine may help to combat these diseases. For this, identification of disease molecular fingerprints and their association with prognosis and targeted therapy must become available. Quantum dots (QDs), semiconductor nanocrystals with unique photo-physical properties, represent a novel class of fluorescence probes to address many of the needs of personalized medicine. This review outlines the properties of QDs that make them a suitable platform for advancing personalized medicine, examines several proof-of-concept studies showing utility of QDs for clinically relevant applications, and discusses current challenges in introducing QDs into clinical practice. PMID:20161004

A generator for unique quantum random numbers based on vacuum states

NASA Astrophysics Data System (ADS)

Gabriel, Christian; Wittmann, Christoffer; Sych, Denis; Dong, Ruifang; Mauerer, Wolfgang; Andersen, Ulrik L.; Marquardt, Christoph; Leuchs, Gerd

2010-10-01

Random numbers are a valuable component in diverse applications that range from simulations over gambling to cryptography. The quest for true randomness in these applications has engendered a large variety of different proposals for producing random numbers based on the foundational unpredictability of quantum mechanics. However, most approaches do not consider that a potential adversary could have knowledge about the generated numbers, so the numbers are not verifiably random and unique. Here we present a simple experimental setup based on homodyne measurements that uses the purity of a continuous-variable quantum vacuum state to generate unique random numbers. We use the intrinsic randomness in measuring the quadratures of a mode in the lowest energy vacuum state, which cannot be correlated to any other state. The simplicity of our source, combined with its verifiably unique randomness, are important attributes for achieving high-reliability, high-speed and low-cost quantum random number generators.

24 CFR 200.1101 - Cross-reference.

Code of Federal Regulations, 2010 CFR

2010-04-01

... URBAN DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Social Security Numbers and Employer Identification Numbers; Applicants in Unassisted Programs § 200.1101 Cross-reference. The provisions in subpart B of part 5 of this title apply to Social Security Numbers and Employer Identification Numbers for...

24 CFR 200.1001 - Cross-reference.

Code of Federal Regulations, 2010 CFR

2010-04-01

... URBAN DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Social Security Numbers and Employer Identification Numbers; Assistance Applicants and Participants § 200.1001 Cross-reference. The provisions in subpart B of part 5 of this title apply to Social Security Numbers and Employer Identification Numbers for...

78 FR 26244 - Updating of Employer Identification Numbers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-06

... (including updated application information regarding the name and taxpayer identifying number of the... require these persons to update application information regarding the name and taxpayer identifying number..., Application for Employer Identification Number, requires entities to disclose the name of the EIN applicant's...

Core Proteomic Analysis of Unique Metabolic Pathways of Salmonella enterica for the Identification of Potential Drug Targets.

PubMed

Uddin, Reaz; Sufian, Muhammad

2016-01-01

Infections caused by Salmonella enterica, a Gram-negative facultative anaerobic bacteria belonging to the family of Enterobacteriaceae, are major threats to the health of humans and animals. The recent availability of complete genome data of pathogenic strains of the S. enterica gives new avenues for the identification of drug targets and drug candidates. We have used the genomic and metabolic pathway data to identify pathways and proteins essential to the pathogen and absent from the host. We took the whole proteome sequence data of 42 strains of S. enterica and Homo sapiens along with KEGG-annotated metabolic pathway data, clustered proteins sequences using CD-HIT, identified essential genes using DEG database and discarded S. enterica homologs of human proteins in unique metabolic pathways (UMPs) and characterized hypothetical proteins with SVM-prot and InterProScan. Through this core proteomic analysis we have identified enzymes essential to the pathogen. The identification of 73 enzymes common in 42 strains of S. enterica is the real strength of the current study. We proposed all 73 unexplored enzymes as potential drug targets against the infections caused by the S. enterica. The study is comprehensive around S. enterica and simultaneously considered every possible pathogenic strain of S. enterica. This comprehensiveness turned the current study significant since, to the best of our knowledge it is the first subtractive core proteomic analysis of the unique metabolic pathways applied to any pathogen for the identification of drug targets. We applied extensive computational methods to shortlist few potential drug targets considering the druggability criteria e.g. Non-homologous to the human host, essential to the pathogen and playing significant role in essential metabolic pathways of the pathogen (i.e. S. enterica). In the current study, the subtractive proteomics through a novel approach was applied i.e. by considering only proteins of the unique metabolic pathways of the pathogens and mining the proteomic data of all completely sequenced strains of the pathogen, thus improving the quality and application of the results. We believe that the sharing of the knowledge from this study would eventually lead to bring about novel and unique therapeutic regimens against the infections caused by the S. enterica.

Role of forensic odontologist in post mortem person identification

PubMed Central

Pramod, Jahagirdar B.; Marya, Anand; Sharma, Vidhii

2012-01-01

The natural teeth are the most durable organs in the bodies of vertebrates, and humankind's understanding of their own past and evolution relies heavily upon remnant dental evidence found as fossils. The use of features unique to the human dentition as an aid to personal identification is widely accepted within the forensic field. Comparative dental identifications play a major role in identifying the victims of violence, disaster or other mass tragedies. The comparison of ante-mortem and postmortem dental records to determine human identity has long been established. Indeed, it is still a major identification method in criminal investigations, mass disasters, grossly decomposed or traumatized bodies, and in other situations where visual identification is neither possible nor desirable. This article has comprehensively described some of the methods, and additional factors aiding in postmortem person identification. PMID:23559914

Development and in silico evaluation of large-scale metabolite identification methods using functional group detection for metabolomics

PubMed Central

Mitchell, Joshua M.; Fan, Teresa W.-M.; Lane, Andrew N.; Moseley, Hunter N. B.

2014-01-01

Large-scale identification of metabolites is key to elucidating and modeling metabolism at the systems level. Advances in metabolomics technologies, particularly ultra-high resolution mass spectrometry (MS) enable comprehensive and rapid analysis of metabolites. However, a significant barrier to meaningful data interpretation is the identification of a wide range of metabolites including unknowns and the determination of their role(s) in various metabolic networks. Chemoselective (CS) probes to tag metabolite functional groups combined with high mass accuracy provide additional structural constraints for metabolite identification and quantification. We have developed a novel algorithm, Chemically Aware Substructure Search (CASS) that efficiently detects functional groups within existing metabolite databases, allowing for combined molecular formula and functional group (from CS tagging) queries to aid in metabolite identification without a priori knowledge. Analysis of the isomeric compounds in both Human Metabolome Database (HMDB) and KEGG Ligand demonstrated a high percentage of isomeric molecular formulae (43 and 28%, respectively), indicating the necessity for techniques such as CS-tagging. Furthermore, these two databases have only moderate overlap in molecular formulae. Thus, it is prudent to use multiple databases in metabolite assignment, since each major metabolite database represents different portions of metabolism within the biosphere. In silico analysis of various CS-tagging strategies under different conditions for adduct formation demonstrate that combined FT-MS derived molecular formulae and CS-tagging can uniquely identify up to 71% of KEGG and 37% of the combined KEGG/HMDB database vs. 41 and 17%, respectively without adduct formation. This difference between database isomer disambiguation highlights the strength of CS-tagging for non-lipid metabolite identification. However, unique identification of complex lipids still needs additional information. PMID:25120557

An application of mass spectrometry for quality control of biologicals: Highly sensitive profiling of plasma residuals in human plasma-derived immunoglobulin.

PubMed

Limonier, Franck; Van Steendam, Katleen; Waeterloos, Geneviève; Brusselmans, Koen; Sneyers, Myriam; Deforce, Dieter

2017-01-30

Thromboembolic events (TEE) associated to trace amounts of plasmatic activated coagulation factor XI (FXIa) in administrated immunoglobulin (Ig) have recently raised concerns and hence there is a need for highly sensitive profiling of residual plasma source proteins. This study aims to consider LC-ESI-QTOF data-dependent acquisition in combination with sample fractionation for this purpose. Sample fractionation proved mandatory to enable identification of plasma residuals. Two approaches were compared: Ig depletion with protein G - protein A affinity chromatography and low-abundant protein enrichment with a combinatorial peptide ligand library (ProteoMiner™, Bio-Rad). The latter allowed a higher number of identifications. Highly sensitive detection of prothrombotic FXIa was assessed with confident identification of a 1ng/mg spike. Moreover, different residuals compositions were profiled for various commercial Ig products. Using a quantitative label free analysis, a TEE-positive Ig batch was distinguished from other regular Ig products, with increased levels of FXIa but also other unique proteins. This could have prevented the recently observed TEE problems with Ig. The method is a convenient tool to better characterize Ig products after any plasma pool or manufacture process change, gaining insights in the product quality profile without any prior information required. This study characterized residual plasma proteins in Ig products, using bottom-up LC-MS/MS with conventional data-dependent acquisition, preceded by sample fractionation. Without any prior information or target-specific development, >30 proteins were identified in a commercial Ig product. Quality control relevance was demonstrated with the identification of FXIa spiked at 1ng/mg in Ig, which is below the minimal thrombotic dose of 3ng/mg observed in an in vivo model. Relative label-free quantitation highlighted significant differences in normalized abundances of residual proteins between Ig products. A TEE-positive batch was distinguished by unique profile of residual proteins, including FXIa but also various blood stream-regulator proteins (fibrinogen, angiotensinogen, antithrombin-III, complement component C8, …). Those results emphasize that MS screening is a relevant first-line test to prevent any undesired concentration of plasma impurities after a plasma pool or manufacturing process change. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

LipidMatch: an automated workflow for rule-based lipid identification using untargeted high-resolution tandem mass spectrometry data.

PubMed

Koelmel, Jeremy P; Kroeger, Nicholas M; Ulmer, Candice Z; Bowden, John A; Patterson, Rainey E; Cochran, Jason A; Beecher, Christopher W W; Garrett, Timothy J; Yost, Richard A

2017-07-10

Lipids are ubiquitous and serve numerous biological functions; thus lipids have been shown to have great potential as candidates for elucidating biomarkers and pathway perturbations associated with disease. Methods expanding coverage of the lipidome increase the likelihood of biomarker discovery and could lead to more comprehensive understanding of disease etiology. We introduce LipidMatch, an R-based tool for lipid identification for liquid chromatography tandem mass spectrometry workflows. LipidMatch currently has over 250,000 lipid species spanning 56 lipid types contained in in silico fragmentation libraries. Unique fragmentation libraries, compared to other open source software, include oxidized lipids, bile acids, sphingosines, and previously uncharacterized adducts, including ammoniated cardiolipins. LipidMatch uses rule-based identification. For each lipid type, the user can select which fragments must be observed for identification. Rule-based identification allows for correct annotation of lipids based on the fragments observed, unlike typical identification based solely on spectral similarity scores, where over-reporting structural details that are not conferred by fragmentation data is common. Another unique feature of LipidMatch is ranking lipid identifications for a given feature by the sum of fragment intensities. For each lipid candidate, the intensities of experimental fragments with exact mass matches to expected in silico fragments are summed. The lipid identifications with the greatest summed intensity using this ranking algorithm were comparable to other lipid identification software annotations, MS-DIAL and Greazy. For example, for features with identifications from all 3 software, 92% of LipidMatch identifications by fatty acyl constituents were corroborated by at least one other software in positive mode and 98% in negative ion mode. LipidMatch allows users to annotate lipids across a wide range of high resolution tandem mass spectrometry experiments, including imaging experiments, direct infusion experiments, and experiments employing liquid chromatography. LipidMatch leverages the most extensive in silico fragmentation libraries of freely available software. When integrated into a larger lipidomics workflow, LipidMatch may increase the probability of finding lipid-based biomarkers and determining etiology of disease by covering a greater portion of the lipidome and using annotation which does not over-report biologically relevant structural details of identified lipid molecules.

26 CFR 301.7701-12 - Employer identification number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Employer identification number. 301.7701-12 Section 301.7701-12 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURE AND ADMINISTRATION PROCEDURE AND ADMINISTRATION Definitions § 301.7701-12 Employer identification...

32 CFR Table 1 to Part 855 - Purpose of Use/Verification/Approval Authority/Fees

Code of Federal Regulations, 2011 CFR

2011-07-01

... change of station, etc.) or for private, non revenue flights Social security number in block 1 on DD Form... of a uniformed service member Identification card (DD Form 1173) number or social security number... Form 1173) number or social security number, identification card expiration date, sponsor's retirement...

32 CFR Table 1 to Part 855 - Purpose of Use/Verification/Approval Authority/Fees

Code of Federal Regulations, 2013 CFR

2013-07-01

... change of station, etc.) or for private, non revenue flights Social security number in block 1 on DD Form... of a uniformed service member Identification card (DD Form 1173) number or social security number... Form 1173) number or social security number, identification card expiration date, sponsor's retirement...