Putative and unique gene sequence utilization for the design of species specific probes as modeled by Lactobacillus plantarum

USDA-ARS?s Scientific Manuscript database

The concept of utilizing putative and unique gene sequences for the design of species specific probes was tested. The abundance profile of assigned functions within the Lactobacillus plantarum genome was used for the identification of the putative and unique gene sequence, csh. The targeted gene (cs...

Magic Memories: Young Children's Verbal Recall after a 6-Year Delay

ERIC Educational Resources Information Center

Jack, Fiona; Simcock, Gabrielle; Hayne, Harlene

2012-01-01

This report describes the first prospective study specifically designed to assess children's verbal memory for a unique event 6 years after it occurred. Forty-six 27- to 51-month-old children took part in a unique event and were interviewed about it twice, after 24-hr and 6-year delays. During the 6-year interview, 9 children verbally recalled the…

Prototype data terminal: Multiplexer/demultiplexer

NASA Technical Reports Server (NTRS)

Leck, D. E.; Goodwin, J. E.

1972-01-01

The design and operation of a quad redundant data terminal and a multiplexer/demultiplexer (MDU) design are described. The most unique feature is the design of the quad redundant data terminal. This is one of the few designs where the unit is fail/op, fail/op, fail/safe. Laboratory tests confirm that the unit will operate satisfactorily with the failure of three out of four channels. Although the design utilizes state-of-the-art technology. The waveform error checks, the voting techniques, and the parity bit checks are believed to be used in unique configurations. Correct word selection routines are also novel, if not unique. The MDU design, while not redundant, utilizes, the latest state-of-the-art advantages of light couplers and integrated circuit amplifiers.

THE TRAINING CENTER, DIFFERENT PURPOSES, DIFFERENT DESIGNS, A LOOK AT SELECTED CORPORATE TRAINING CENTERS.

ERIC Educational Resources Information Center

MAHLER, HARRY B.

UNIQUE FEATURES AND FLOOR PLANS OF FUNCTIONALLY DESIGNED CORPORATE TRAINING CENTERS ARE DESICRIBED. THE TRAVELERS EDUCATION CENTER HAS SIMPLY DESIGNED ROOMS AND FEW AUDIOVISUAL AIDS (AV). BUTLER MANUFACTURING HAS ITS STUDY CENTER IN A WING OF A MOTEL WHICH IS CONVENIENT TO THE GENERAL OFFICES AND DOWNTOWN AREA. SINCE COMPANY PERSONNEL USE THE…

A Comparative Study of Competency-Based Courses Demonstrating a Potential Measure of Course Quality and Student Success

ERIC Educational Resources Information Center

Krause, Jackie; Dias, Laura Portolese; Schedler, Chris

2015-01-01

While competency-based education is growing, standardized tools for evaluating the unique characteristics of course design in this domain are still under development. This preliminary research study evaluated the effectiveness of a rubric developed for assessing course design of competency-based courses in an undergraduate Information Technology…

The Role of Flow Experience and CAD Tools in Facilitating Creative Behaviours for Architecture Design Students

ERIC Educational Resources Information Center

Dawoud, Husameddin M.; Al-Samarraie, Hosam; Zaqout, Fahed

2015-01-01

This study examined the role of flow experience in intellectual activity with an emphasis on the relationship between flow experience and creative behaviour in design using CAD. The study used confluence and psychometric approaches because of their unique abilities to depict a clear image of creative behaviour. A cross-sectional study…

Agreement between Computerized and Human Assessment of Performance on the Ruff Figural Fluency Test

PubMed Central

Elderson, Martin F.; Pham, Sander; van Eersel, Marlise E. A.; Wolffenbuttel, Bruce H. R.; Kok, Johan; Gansevoort, Ron T.; Tucha, Oliver; van der Klauw, Melanie M.; Slaets, Joris P. J.

2016-01-01

The Ruff Figural Fluency Test (RFFT) is a sensitive test for nonverbal fluency suitable for all age groups. However, assessment of performance on the RFFT is time-consuming and may be affected by interrater differences. Therefore, we developed computer software specifically designed to analyze performance on the RFFT by automated pattern recognition. The aim of this study was to compare assessment by the new software with conventional assessment by human raters. The software was developed using data from the Lifelines Cohort Study and validated in an independent cohort of the Prevention of Renal and Vascular End Stage Disease (PREVEND) study. The total study population included 1,761 persons: 54% men; mean age (SD), 58 (10) years. All RFFT protocols were assessed by the new software and two independent human raters (criterion standard). The mean number of unique designs (SD) was 81 (29) and the median number of perseverative errors (interquartile range) was 9 (4 to 16). The intraclass correlation coefficient (ICC) between the computerized and human assessment was 0.994 (95%CI, 0.988 to 0.996; p<0.001) and 0.991 (95%CI, 0.990 to 0.991; p<0.001) for the number of unique designs and perseverative errors, respectively. The mean difference (SD) between the computerized and human assessment was -1.42 (2.78) and +0.02 (1.94) points for the number of unique designs and perseverative errors, respectively. This was comparable to the agreement between two independent human assessments: ICC, 0.995 (0.994 to 0.995; p<0.001) and 0.985 (0.982 to 0.988; p<0.001), and mean difference (SD), -0.44 (2.98) and +0.56 (2.36) points for the number of unique designs and perseverative errors, respectively. We conclude that the agreement between the computerized and human assessment was very high and comparable to the agreement between two independent human assessments. Therefore, the software is an accurate tool for the assessment of performance on the RFFT. PMID:27661083

Multi-stability and variable stiffness of cellular solids designed based on origami patterns

NASA Astrophysics Data System (ADS)

Sengupta, Sattam; Li, Suyi

2017-04-01

The application of origami-inspired designs to engineered structures and materials has been a subject of much research efforts. These structures and materials, whose mechanical properties are directly related to the geometry of folding, are capable of achieving a host of unique adaptive functions. In this study, we investigate a three-dimensional multistability and variable stiffness function of a cellular solid based on the Miura-Ori folding pattern. The unit cell of such a solid, consisting of two stacked Miura-Ori sheets, can be elastically bistable due to the nonlinear relationship between rigid-folding deformation and crease material bending. Such a bistability possesses an unorthodox property: the critical, unstable configuration lies on the same side of two stable ones, so that two different force-deformation curves co-exist within the same range of deformation. By exploiting such unique stability properties, we can achieve a programmable stiffness change between the two elastically stable states, and the stiffness differences can be prescribed by tailoring the crease patterns of the cell. This paper presents a comprehensive parametric study revealing the correlations between such variable stiffness and various design parameters. The unique properties stemming from the bistability and design of such a unit cell can be advanced further by assembling them into a solid which can be capable of shape morphing and programmable mechanical properties.

Dissemination of the Look AHEAD Lifestyle Intervention in the United States Air Force: Study Rationale, Design and Methods

PubMed Central

Krukowski, Rebecca A.; Hare, Marion E.; Talcott, Gerald W.; Johnson, Karen C.; Richey, Phyllis A.; Kocak, Mehmet; Balderas, Jennifer; Colvin, Lauren; Keller, Patrick L.; Waters, Teresa M.; Klesges, Robert C.

2014-01-01

Despite an increase in overweight and obesity similar to the civilian population, there have been few randomized controlled trials examining behavioral weight management interventions in the military settings. This paper describes the design, intervention development and analysis plan of the Fit Blue study, a randomized controlled behavioral weight loss trial taking place in the United States Air Force. This study compares two adapted versions of the efficacious Look AHEAD Intensive Lifestyle Intervention (ILI), a counselor-initiated condition and a self-paced condition. Also described are the unique steps required when conducting military-based health promotion research and adaptations made to the Look AHEAD intervention to accommodate the military environment. To our knowledge, this is the first translation of the Look AHEAD ILI in the military setting and one of the first translations of the ILI in general. If successful, this intervention could be disseminated to the entire U.S. Military as this project is designed to overcome the barriers and utilize the facilitators for weight loss that are unique to a military population. Programs validated in military populations can have a major public health impact given that with 1.4 million active duty personnel, the Department of Defense is the nation’s largest employer. However, while this intervention is designed for a military population and there are unique aspects of the military that may enhance weight loss interventions, the diversity of the study population should help inform obesity efforts in both civilian and military settings. PMID:25545025

Dissemination of the Look AHEAD intensive lifestyle intervention in the United States Air Force: study rationale, design and methods.

PubMed

Krukowski, Rebecca A; Hare, Marion E; Talcott, Gerald W; Johnson, Karen C; Richey, Phyllis A; Kocak, Mehmet; Balderas, Jennifer; Colvin, Lauren; Keller, Patrick L; Waters, Teresa M; Klesges, Robert C

2015-01-01

Despite an increase in overweight and obesity similar to the civilian population, there have been few randomized controlled trials examining behavioral weight management interventions in the military settings. This paper describes the design, intervention development and analysis plan of the Fit Blue study, a randomized controlled behavioral weight loss trial taking place in the United States Air Force. This study compares two adapted versions of the efficacious Look AHEAD Intensive Lifestyle Intervention (ILI), a counselor-initiated condition and a self-paced condition. Also described are the unique steps required when conducting military-based health promotion research and adaptations made to the Look AHEAD intervention to accommodate the military environment. To our knowledge, this is the first translation of the Look AHEAD ILI in the military setting and one of the first translations of the ILI in general. If successful, this intervention could be disseminated to the entire U.S. Military as this project is designed to overcome the barriers and utilize the facilitators for weight loss that are unique to a military population. Programs validated in military populations can have a major public health impact given that with 1.4 million active duty personnel, the Department of Defense is the nation's largest employer. However, while this intervention is designed for a military population and there are unique aspects of the military that may enhance weight loss interventions, the diversity of the study population should help inform obesity efforts in both civilian and military settings. Copyright © 2014 Elsevier Inc. All rights reserved.

Sense of Community in a Blended Technology Integration Course: A Design-Based Research Study

ERIC Educational Resources Information Center

Harrison, J. Buckley; West, Richard E.

2014-01-01

This design-based research study explored whether "sense of community" was maintained while flexibility in the course was increased through an adoption of a unique blended learning model. Data collected in this study show a significant drop in the sense of connectedness score from a mean of 50.8 out of 66 to a mean of 39.68 in the first…

A preliminary 6 DOF attitude and translation control system design for Starprobe

NASA Technical Reports Server (NTRS)

Mak, P.; Mettler, E.; Vijayarahgavan, A.

1981-01-01

The extreme thermal environment near perihelion and the high-accuracy gravitational science experiments impose unique design requirements on various subsystems of Starprobe. This paper examines some of these requirements and their impact on the preliminary design of a six-degree-of-freedom attitude and translational control system. Attention is given to design considerations, the baseline attitude/translational control system, system modeling, and simulation studies.

Design in Four Diagnostic Language Assessments

ERIC Educational Resources Information Center

Cumming, Alister

2015-01-01

The studies documented in the four articles in this special issue uniquely exemplify principles of design-based research as follows: by taking innovative approaches to significant problems in the contexts of real educational practices; by addressing fundamental pedagogical and policy issues related to language, learning, and teaching; and, in the…

Photography To Enhance Aesthetic Skills.

ERIC Educational Resources Information Center

McIsaac, Marina Stock

Recognizing that photography in the classroom is highly motivating in that it offers a unique vehicle for communicating ideas visually, this study was designed to isolate variables which can be both observed and evaluated in photographs and for which instruction can be designed. Relationships among the technical and aesthetic qualities in…

Exploring Employee Engagement from the Employee Perspective: Implications for HRD

ERIC Educational Resources Information Center

Shuck, M. Brad; Rocco, Tonette S.; Albornoz, Carlos A.

2011-01-01

Purpose: The purpose of this paper is to examine an employee's unique experience of being engaged in their work. Design/methodology/approach: Following Yin's case study design method, researchers collected documents, conducted semi-structured interviews and recorded observations at a large multinational service corporation ranked as one of the…

Examining Teacher Grades Using Rasch Measurement Theory

ERIC Educational Resources Information Center

Randall, Jennifer; Engelhard, George, Jr.

2009-01-01

In this study, we present an approach to questionnaire design within educational research based on Guttman's mapping sentences and Many-Facet Rasch Measurement Theory. We designed a 54-item questionnaire using Guttman's mapping sentences to examine the grading practices of teachers. Each item in the questionnaire represented a unique student…

75 FR 21126 - Bureau of Educational and Cultural Affairs (ECA) Request for Grant Proposals: Study of the U.S...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-22

... group of up to 25 Pakistani students with a uniquely designed program that provides a comparative... for Grant Proposals: Study of the U.S. Institute for Pakistani Student Leaders on Comparative Public... the design and implementation of a six- week academic institute for up to 25 Pakistani student leaders...

Specially designed B4C/SnO2 nanocomposite for photocatalysis: traditional ceramic with unique properties

NASA Astrophysics Data System (ADS)

Singh, Paviter; Kaur, Gurpreet; Singh, Kulwinder; Singh, Bikramjeet; Kaur, Manpreet; Kaur, Manjot; Krishnan, Unni; Kumar, Manjeet; Bala, Rajni; Kumar, Akshay

2018-02-01

Boron carbide: A traditional ceramic material shows unique properties when explored in nano-range. Specially designed boron-based nanocomposite has been synthesized by reflux method. The addition of SnO2 in base matrix increases the defect states in boron carbide and shows unique catalytic properties. The calculated texture coefficient and Nelson-Riley factor show that the synthesized nanocomposite has large number of defect states. Also this composite is explored for the first time for catalysis degradation of industrial used dyes. The degradation analysis of industrial pollutants such as Novacron red Huntsman (NRH) and methylene blue (MB) dye reveals that the composite is an efficient catalyst. Degradation study shows that 1 g/L catalyst concentration of B4C/SnO2 degrades NRH and MB dye up to approximately 97.38 and 79.41%, respectively, in 20 min under sunlight irradiation. This water-insoluble catalyst can be recovered and reused.

De novo design of the hydrophobic core of ubiquitin.

PubMed Central

Lazar, G. A.; Desjarlais, J. R.; Handel, T. M.

1997-01-01

We have previously reported the development and evaluation of a computational program to assist in the design of hydrophobic cores of proteins. In an effort to investigate the role of core packing in protein structure, we have used this program, referred to as Repacking of Cores (ROC), to design several variants of the protein ubiquitin. Nine ubiquitin variants containing from three to eight hydrophobic core mutations were constructed, purified, and characterized in terms of their stability and their ability to adopt a uniquely folded native-like conformation. In general, designed ubiquitin variants are more stable than control variants in which the hydrophobic core was chosen randomly. However, in contrast to previous results with 434 cro, all designs are destabilized relative to the wild-type (WT) protein. This raises the possibility that beta-sheet structures have more stringent packing requirements than alpha-helical proteins. A more striking observation is that all variants, including random controls, adopt fairly well-defined conformations, regardless of their stability. This result supports conclusions from the cro studies that non-core residues contribute significantly to the conformational uniqueness of these proteins while core packing largely affects protein stability and has less impact on the nature or uniqueness of the fold. Concurrent with the above work, we used stability data on the nine ubiquitin variants to evaluate and improve the predictive ability of our core packing algorithm. Additional versions of the program were generated that differ in potential function parameters and sampling of side chain conformers. Reasonable correlations between experimental and predicted stabilities suggest the program will be useful in future studies to design variants with stabilities closer to that of the native protein. Taken together, the present study provides further clarification of the role of specific packing interactions in protein structure and stability, and demonstrates the benefit of using systematic computational methods to predict core packing arrangements for the design of proteins. PMID:9194177

Creative Thinking of Practical Engineering Students During a Design Project

NASA Astrophysics Data System (ADS)

Waks, Shlomo; Merdler, Moti

2003-01-01

Creativity in engineering design had become an economic necessity and not merely the privilege of unique individuals. The search for new, innovative and effective ideas in engineering design stands in center of daily creative performance. This search requires sensitivity to gaps of knowledge and information, and the ability to evoke numerous, different and unique ideas about engineering problems. The source of such information or knowledge can be either extrinsic-such as provided by an instructor or expert or intrinsic, which might involve transformation from one field or context to another. Furthermore, interaction with an exterior source as well as developing an inherent drive, have an impact on the motivation to perform creatively. This article, which is based on a study conducted among Israeli practical engineering students, deals with the variations in creative thinking during various stages of a design project and the relation between creative thinking and motivation factors.

Neural architecture design based on extreme learning machine.

PubMed

Bueno-Crespo, Andrés; García-Laencina, Pedro J; Sancho-Gómez, José-Luis

2013-12-01

Selection of the optimal neural architecture to solve a pattern classification problem entails to choose the relevant input units, the number of hidden neurons and its corresponding interconnection weights. This problem has been widely studied in many research works but their solutions usually involve excessive computational cost in most of the problems and they do not provide a unique solution. This paper proposes a new technique to efficiently design the MultiLayer Perceptron (MLP) architecture for classification using the Extreme Learning Machine (ELM) algorithm. The proposed method provides a high generalization capability and a unique solution for the architecture design. Moreover, the selected final network only retains those input connections that are relevant for the classification task. Experimental results show these advantages. Copyright © 2013 Elsevier Ltd. All rights reserved.

21 CFR 830.320 - Submission of unique device identification information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Identification Database § 830.320 Submission of unique device identification information. (a) Designation of... Unique Device Identification Database (GUDID) in a format that we can process, review, and archive...

The conception, birth, and growth of a missile umbilical system

NASA Technical Reports Server (NTRS)

Nordman, G. W.

1977-01-01

The design development was traced for the sprint 2 and improved sprint 2 missile system (ISMS) umbilical system. The unique system requirements, umbilical designs considered to meet the requirements, and the problems encountered and solutions derived during the design, and development testing of the selected systems are described. The sprint 2 development effort consisted of design, analysis, and testing activities. The ISMS effort involved the performance of an extensive trade study to determine the optimum design to meet the ISMS conditions.

Studios Abroad: A Challenge in Innovative Pedagogy

ERIC Educational Resources Information Center

Macedo, Joseli

2017-01-01

Study abroad programs offer a unique opportunity to evaluate pedagogic models. The role of studios in design and planning pedagogy has been examined. However, how the general framework of a studio supports other pedagogic models has not been widely discussed. This article assesses a series of urban planning and design studios conducted abroad to…

An Overview of MICRO-CMI.

ERIC Educational Resources Information Center

McIsaac, Donald; And Others

The MICRO-CMI system designed at the University of Wisconsin combines the grouping, diagnosis, and prescription functions of two previously designed systems, with the additional dimension of a sheet scanner to input grades and to score tests. Moreover, the user may specify a unique program of studies for each student, thus enabling the support of…

Online Course Design in a Programmatic Framework: A Case from Social Work

ERIC Educational Resources Information Center

Stewart, Patricia Lynn

2014-01-01

The focus of this study centers on the way instructors, and more specifically, instructors within a programmatic initiative, think about teaching and the decision-making process they employ to design learning experiences for an online environment. Often administrative initiatives do not consider the unique individual instructor needs when planning…

System dynamics and simulation of LSS

NASA Technical Reports Server (NTRS)

Ryan, R. F.

1978-01-01

Large Space Structures have many unique problems arising from mission objectives and the resulting configuration. Inherent in these configurations is a strong coupling among several of the designing disciplines. In particular, the coupling between structural dynamics and control is a key design consideration. The solution to these interactive problems requires efficient and accurate analysis, simulation and test techniques, and properly planned and conducted design trade studies. The discussion presented deals with these subjects and concludes with a brief look at some NASA capabilities which can support these technology studies.

17 CFR 45.5 - Unique swap identifiers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... transmit a unique swap identifier as provided in paragraphs (a)(1) and (2) of this section. (1) Creation... prior to the reporting of required swap creation data. The unique swap identifier shall consist of a... execution facility or designated contract market with respect to unique swap identifier creation; and (ii...

17 CFR 45.5 - Unique swap identifiers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... transmit a unique swap identifier as provided in paragraphs (a)(1) and (2) of this section. (1) Creation... prior to the reporting of required swap creation data. The unique swap identifier shall consist of a... execution facility or designated contract market with respect to unique swap identifier creation; and (ii...

17 CFR 45.5 - Unique swap identifiers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... transmit a unique swap identifier as provided in paragraphs (a)(1) and (2) of this section. (1) Creation... prior to the reporting of required swap creation data. The unique swap identifier shall consist of a... execution facility or designated contract market with respect to unique swap identifier creation; and (ii...

Exploring Biological Classification: The Unique Organism Project

ERIC Educational Resources Information Center

Haines, Sarah; Richman, Laila; Hartley, Renee; Schmid, Rachel

2017-01-01

The unique organism project was designed as a culminating assessment for a biological classification unit in a middle school setting. Students developed a model to represent their unique organism. Using the model, students were required to demonstrate how their unique organism interacts with its environment, and how its internal and external…

SNTP propellant management system

NASA Technical Reports Server (NTRS)

Tippetts, Tom

1993-01-01

Viewgraphs on the following are presented: (1) space nuclear thermal propulsion (SNTP) propellant management system; (2) SNTP cycle selection; (3) NTP system components unique design constraints; (4) bleed cycle unique design requirement for turbopump; (5) bleed cycle turbopump; (6) SNTP carbon-carbon turbine wheel; and (7) turbine development program.

A unique nuclear thermal rocket engine using a particle bed reactor

NASA Astrophysics Data System (ADS)

Culver, Donald W.; Dahl, Wayne B.; McIlwain, Melvin C.

1992-01-01

Aerojet Propulsion Division (APD) studied 75-klb thrust Nuclear Thermal Rocket Engines (NTRE) with particle bed reactors (PBR) for application to NASA's manned Mars mission and prepared a conceptual design description of a unique engine that best satisfied mission-defined propulsion requirements and customer criteria. This paper describes the selection of a sprint-type Mars transfer mission and its impact on propulsion system design and operation. It shows how our NTRE concept was developed from this information. The resulting, unusual engine design is short, lightweight, and capable of high specific impulse operation, all factors that decrease Earth to orbit launch costs. Many unusual features of the NTRE are discussed, including nozzle area ratio variation and nozzle closure for closed loop after cooling. Mission performance calculations reveal that other well known engine options do not support this mission.

Design Study for the Asteroid Redirect Vehicle (ARV) Composite Primary Bulkhead

NASA Technical Reports Server (NTRS)

Cressman, Thomas O.; Paddock, David A.

2017-01-01

A design study was undertaken of a carbon fiber primary bulkhead for a large solar electric propulsion (SEP) spacecraft. The bulkhead design, supporting up to 16 t of xenon propellant, progressed from one consisting of many simple parts with many complex joints, to one consisting of a few complex parts with a few simple joints. The unique capabilities of composites led to a topology that transitioned loads from bending to in-plane tension and shear, with low part count. This significantly improved bulkhead manufacturability, cost, and mass. The stiffness-driven structure utilized high-modulus M55J fiber unidirectional prepregs. A full-scale engineering demonstration unit (EDU) of the concept was used to demonstrate manufacturability of the concept. Actual labor data was obtained, which could be extrapolated to a full bulkhead. The effort demonstrated the practicality of using high-modulus fiber (HMF) composites for unique shape topologies that minimize mass and cost. The lessons are applicable to primary and secondary aerospace structures that are stiffness driven.

43 CFR 11.83 - Damage determination phase-use value methodologies.

Code of Federal Regulations, 2010 CFR

2010-10-01

... subject to standards governing its application? (vi) Are methodological inputs and assumptions supported... used for unique or difficult design and estimating conditions. This methodology requires the construction of a simple design for which an estimate can be found and applied to the unique or difficult...

43 CFR 11.83 - Damage determination phase-use value methodologies.

Code of Federal Regulations, 2013 CFR

2013-10-01

... subject to standards governing its application? (vi) Are methodological inputs and assumptions supported... used for unique or difficult design and estimating conditions. This methodology requires the construction of a simple design for which an estimate can be found and applied to the unique or difficult...

43 CFR 11.83 - Damage determination phase-use value methodologies.

Code of Federal Regulations, 2014 CFR

2014-10-01

... subject to standards governing its application? (vi) Are methodological inputs and assumptions supported... used for unique or difficult design and estimating conditions. This methodology requires the construction of a simple design for which an estimate can be found and applied to the unique or difficult...

43 CFR 11.83 - Damage determination phase-use value methodologies.

Code of Federal Regulations, 2012 CFR

2012-10-01

... subject to standards governing its application? (vi) Are methodological inputs and assumptions supported... used for unique or difficult design and estimating conditions. This methodology requires the construction of a simple design for which an estimate can be found and applied to the unique or difficult...

43 CFR 11.83 - Damage determination phase-use value methodologies.

Code of Federal Regulations, 2011 CFR

2011-10-01

... subject to standards governing its application? (vi) Are methodological inputs and assumptions supported... used for unique or difficult design and estimating conditions. This methodology requires the construction of a simple design for which an estimate can be found and applied to the unique or difficult...

76 FR 80947 - Draft Guidance for Industry and Food and Drug Administration Staff; Investigational Device...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... for Early Feasibility Medical Device Clinical Studies, Including Certain First in Human Studies... feasibility studies of medical devices, using appropriate risk mitigation strategies, under the... comments on the key principles unique to the justification for, and design of, early feasibility studies...

Mobile Phones, Civic Engagement, and School Performance in Pakistan. CEPA Working Paper No. 16-17

ERIC Educational Resources Information Center

Asim, Minahil; Dee, Thomas

2016-01-01

The effective governance of local public services depends critically on the civic engagement of local citizens. However, recent efforts to promote effective citizen oversight of the public-sector services in developing countries have had mixed results. This study discusses and evaluates a uniquely designed, low-cost, scalable program designed to…

Lessons from the Sea: A Case Study of an Experiential MBA International Management Course

ERIC Educational Resources Information Center

Chaves, Wanda V.; Yacovelli, Steven R.

2008-01-01

This article describes the design and implementation of a unique course developed to deeply engage MBA students in the complexities of the field of international management. This experiential course was designed around an integrative project based on the cruise industry. The professor worked with the leadership team of a major cruise line to…

Design, development and deployment of a Diabetes Research Registry to facilitate recruitment in clinical research.

PubMed

Tan, Meng H; Bernstein, Steven J; Gendler, Stephen; Hanauer, David; Herman, William H

2016-03-01

A major challenge in conducting clinical trials/studies is the timely recruitment of eligible subjects. Our aim is to develop a Diabetes Research Registry (DRR) to facilitate recruitment by matching potential subjects interested in research with approved clinical studies using study entry criteria abstracted from their electronic health records (EHR). A committee with expertise in diabetes, quality improvement, information technology, and informatics designed and developed the DRR. Using a hybrid approach, we identified and consented patients interested in research, abstracted their EHRs to assess common eligibility criteria, and contacted them about their interest in participating in specific studies. Investigators submit their requests with study entry criteria to the DRR which then provides a list of potential subjects who may be directly contacted for their study. The DRR meets all local, regional and federal regulatory requirements. After 5 years, the DRR has over 5000 registrants. About 30% have type 1 diabetes and 70% have type 2 diabetes. There are almost equal proportions of men and women. During this period, 31 unique clinical studies from 19 unique investigators requested lists of potential subjects for their studies. Eleven grant applications from 10 unique investigators used aggregated counts of potentially eligible subjects in their applications. The DRR matches potential subjects interested in research with approved clinical studies using study entry criteria abstracted from their EHR. By providing large lists of potentially eligible study subjects quickly, the DRR facilitated recruitment in 31 clinical studies. Copyright © 2016 Elsevier Inc. All rights reserved.

Standards for Clinical Trials in Male and Female Sexual Dysfunction: I. Phase I to Phase IV Clinical Trial Design.

PubMed

Fisher, William A; Gruenwald, Ilan; Jannini, Emmanuele A; Lev-Sagie, Ahinoam; Lowenstein, Lior; Pyke, Robert E; Reisman, Yakov; Revicki, Dennis A; Rubio-Aurioles, Eusebio

2016-12-01

This series of articles outlines standards for clinical trials of treatments for male and female sexual dysfunctions, with a focus on research design and patient-reported outcome assessment. These articles consist of revision, updating, and integration of articles on standards for clinical trials in male and female sexual dysfunction from the 2010 International Consultation on Sexual Medicine developed by the authors as part of the 2015 International Consultation on Sexual Medicine. We are guided in this effort by several principles. In contrast to previous versions of these guidelines, we merge discussion of standards for clinical trials in male and female sexual dysfunction in an integrated approach that emphasizes the common foundational practices that underlie clinical trials in the two settings. We present a common expected standard for clinical trial design in male and female sexual dysfunction, a common rationale for the design of phase I to IV clinical trials, and common considerations for selection of study population and study duration in male and female sexual dysfunction. We present a focused discussion of fundamental principles in patient- (and partner-) reported outcome assessment and complete this series of articles with specific discussions of selected aspects of clinical trials that are unique to male and to female sexual dysfunction. Our consideration of standards for clinical trials in male and female sexual dysfunction attempts to embody sensitivity to existing and new regulatory guidance and to address implications of the evolution of the diagnosis of sexual dysfunction that have been brought forward in the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition. The first article in this series focuses on phase I to phase IV clinical trial design considerations. Subsequent articles in this series focus on the measurement of patient-reported outcomes, unique aspects of clinical trial design for men, and unique aspects of clinical trial design for women. Copyright © 2016 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

Mississippi communities for healthy living: implementing a nutrition intervention effectiveness study in a rural health disparate region

USDA-ARS?s Scientific Manuscript database

Intervention research in rural, health disparate communities presents unique challenges for study design, implementation, and evaluation. Challenges include: 1) culturally appropriate intervention components; 2) participant recruitment and retention; 3) treatment cross-contamination; 4) intervention...

76 FR 68769 - Bridging the Idea Development Evaluation Assessment and Long-Term Initiative and Total Product...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... complementary methodological frameworks of the IDEAL and TPLC initiatives, more comprehensive and applicable... devices, surgical operations, and invasive medical procedures; Unique study designs and reporting methods...

Field study of integral backwall with elastic inclusion.

DOT National Transportation Integrated Search

2005-01-01

Jointless construction is considered an effective design option to reduce bridge maintenance costs and resist seismic loads. Although these attributes make the integral bridge an increasingly popular choice, soil-structure interaction issues unique t...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehboob, Shahila; Hevener, Kirk E.; Truong, Kent

Because of structural and mechanistic differences between eukaryotic and prokaryotic fatty acid synthesis enzymes, the bacterial pathway, FAS-II, is an attractive target for the design of antimicrobial agents. We have previously reported the identification of a novel series of benzimidazole compounds with particularly good antibacterial effect against Francisella tularensis, a Category A biowarfare pathogen. Herein we report the crystal structure of the F. tularensis FabI enzyme in complex with our most active benzimidazole compound bound with NADH. The structure reveals that the benzimidazole compounds bind to the substrate site in a unique conformation that is distinct from the binding motifmore » of other known FabI inhibitors. Detailed inhibition kinetics have confirmed that the compounds possess a novel inhibitory mechanism that is unique among known FabI inhibitors. These studies could have a strong impact on future antimicrobial design efforts and may reveal new avenues for the design of FAS-II active antibacterial compounds.« less

The value of Retrospective and Concurrent Think Aloud in formative usability testing of a physician data query tool.

PubMed

Peute, Linda W P; de Keizer, Nicolette F; Jaspers, Monique W M

2015-06-01

To compare the performance of the Concurrent (CTA) and Retrospective (RTA) Think Aloud method and to assess their value in a formative usability evaluation of an Intensive Care Registry-physician data query tool designed to support ICU quality improvement processes. Sixteen representative intensive care physicians participated in the usability evaluation study. Subjects were allocated to either the CTA or RTA method by a matched randomized design. Each subject performed six usability-testing tasks of varying complexity in the query tool in a real-working context. Methods were compared with regard to number and type of problems detected. Verbal protocols of CTA and RTA were analyzed in depth to assess differences in verbal output. Standardized measures were applied to assess thoroughness in usability problem detection weighted per problem severity level and method overall effectiveness in detecting usability problems with regard to the time subjects spent per method. The usability evaluation of the data query tool revealed a total of 43 unique usability problems that the intensive care physicians encountered. CTA detected unique usability problems with regard to graphics/symbols, navigation issues, error messages, and the organization of information on the query tool's screens. RTA detected unique issues concerning system match with subjects' language and applied terminology. The in-depth verbal protocol analysis of CTA provided information on intensive care physicians' query design strategies. Overall, CTA performed significantly better than RTA in detecting usability problems. CTA usability problem detection effectiveness was 0.80 vs. 0.62 (p<0.05) respectively, with an average difference of 42% less time spent per subject compared to RTA. In addition, CTA was more thorough in detecting usability problems of a moderate (0.85 vs. 0.7) and severe nature (0.71 vs. 0.57). In this study, the CTA is more effective in usability-problem detection and provided clarification of intensive care physician query design strategies to inform redesign of the query tool. However, CTA does not outperform RTA. The RTA additionally elucidated unique usability problems and new user requirements. Based on the results of this study, we recommend the use of CTA in formative usability evaluation studies of health information technology. However, we recommend further research on the application of RTA in usability studies with regard to user expertise and experience when focusing on user profile customized (re)design. Copyright © 2015 Elsevier Inc. All rights reserved.

Impact of Classroom Design on Teacher Pedagogy and Student Engagement and Performance in Mathematics

ERIC Educational Resources Information Center

Imms, Wesley; Byers, Terry

2017-01-01

A resurgence in interest in classroom and school design has highlighted how little we know about the impact of learning environments on student and teacher performance. This is partly because of a lack of research methods capable of controlling the complex variables inherent to space and education. In a unique study that overcame such difficulties…

Space tug thermal control

NASA Technical Reports Server (NTRS)

Ward, T. L.

1975-01-01

The future development of full capability Space Tug will impose strict requirements upon the thermal design. While requiring a reliable and reusable design, Space Tug must be capable of steady-state and transient thermal operation during any given mission for mission durations of up to seven days and potentially longer periods of time. Maximum flexibility and adaptability of Space Tug to the mission model requires that the vehicle operate within attitude constraints throughout any specific mission. These requirements were translated into a preliminary design study for a geostationary deploy and retrieve mission definition for Space Tug to determine the thermal control design requirements. Results of the study are discussed with emphasis given to some of the unique avenues pursued during the study, as well as the recommended thermal design configuration.

Social Interaction Needs and Entertainment Approaches to Pregnancy Well-Being in mHealth Technology Design for Low-Income Transmigrant Women: Qualitative Codesign Study

PubMed Central

2018-01-01

Background Low-income Caribbean transmigrant women face unique health challenges during pregnancy that set forth multidimensional implications for the design of mobile health (mHealth). Acknowledgment of the unique health needs of low-income Caribbean immigrant women in the United States and what that entails regarding technology design remains rarely examined in the literature of mHealth technologies. Objective The goal of this study was to reveal the needs and gaps in mHealth interventions for pregnant immigrant women not yet realized in this field. These understandings reveal design opportunities for mHealth. Methods The use of the qualitative participatory action research approach of codesign workshops in this study resulted in design solutions by the participants after reflecting on their earlier focus group discussions. The highlights are not the resulting designs per se but rather the inferences derived from the researcher reflecting on these designs. Results The designs exposed two themes relevant to this paper. First, the participants desired the inclusion and rebuilding of social and organizational relationships in mHealth. The resulting designs formulate an understanding of the women’s health-related social support needs and how technology can facilitate them. Second, the participants wanted entertainment with an element of social participation incorporated in mHealth pregnancy management interventions. This brings attention to the role entertainment can add to the impact mHealth can deliver for pregnancy well-being. Conclusions The study concluded with an examination of social and entertainment design implications that reveal pregnant immigrant women’s virtual health-related sharing habits, choice of sharing interaction scenarios during pregnancy (eg, local, long distance, one-way, two-way, and many-many), and choice of sharing media (eg, text, voice, and video). Additionally, the study revealed exclusions to social sharing capabilities in health technologies for these women. PMID:29653919

Social Interaction Needs and Entertainment Approaches to Pregnancy Well-Being in mHealth Technology Design for Low-Income Transmigrant Women: Qualitative Codesign Study.

PubMed

AlJaberi, Hana

2018-04-13

Low-income Caribbean transmigrant women face unique health challenges during pregnancy that set forth multidimensional implications for the design of mobile health (mHealth). Acknowledgment of the unique health needs of low-income Caribbean immigrant women in the United States and what that entails regarding technology design remains rarely examined in the literature of mHealth technologies. The goal of this study was to reveal the needs and gaps in mHealth interventions for pregnant immigrant women not yet realized in this field. These understandings reveal design opportunities for mHealth. The use of the qualitative participatory action research approach of codesign workshops in this study resulted in design solutions by the participants after reflecting on their earlier focus group discussions. The highlights are not the resulting designs per se but rather the inferences derived from the researcher reflecting on these designs. The designs exposed two themes relevant to this paper. First, the participants desired the inclusion and rebuilding of social and organizational relationships in mHealth. The resulting designs formulate an understanding of the women's health-related social support needs and how technology can facilitate them. Second, the participants wanted entertainment with an element of social participation incorporated in mHealth pregnancy management interventions. This brings attention to the role entertainment can add to the impact mHealth can deliver for pregnancy well-being. The study concluded with an examination of social and entertainment design implications that reveal pregnant immigrant women's virtual health-related sharing habits, choice of sharing interaction scenarios during pregnancy (eg, local, long distance, one-way, two-way, and many-many), and choice of sharing media (eg, text, voice, and video). Additionally, the study revealed exclusions to social sharing capabilities in health technologies for these women. ©Hana AlJaberi. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 13.04.2018.

Standards for Clinical Trials in Male and Female Sexual Dysfunction: III. Unique Aspects of Clinical Trials in Male Sexual Dysfunction.

PubMed

Fisher, William A; Gruenwald, Ilan; Jannini, Emmanuele A; Lev-Sagie, Ahinoam; Lowenstein, Lior; Pyke, Robert E; Reisman, Yakov; Revicki, Dennis A; Rubio-Aurioles, Eusebio

2017-01-01

This series of articles, Standards for Clinical Trials in Male and Female Sexual Dysfunction, began with the discussion of a common expected standard for clinical trial design in male and female sexual dysfunction, a common rationale for the design of phase I to IV clinical trials, and common considerations for the selection of study population and study duration in male and female sexual dysfunction. The second article in this series discussed fundamental principles in development, validation, and selection of patient- (and partner-) reported outcome assessment. The third and present article in this series discusses selected aspects of sexual dysfunction that are that are unique to male sexual dysfunctions and relevant to the conduct of clinical trials of candidate treatments for men. Copyright © 2016 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

A Bayesian pick-the-winner design in a randomized phase II clinical trial.

PubMed

Chen, Dung-Tsa; Huang, Po-Yu; Lin, Hui-Yi; Chiappori, Alberto A; Gabrilovich, Dmitry I; Haura, Eric B; Antonia, Scott J; Gray, Jhanelle E

2017-10-24

Many phase II clinical trials evaluate unique experimental drugs/combinations through multi-arm design to expedite the screening process (early termination of ineffective drugs) and to identify the most effective drug (pick the winner) to warrant a phase III trial. Various statistical approaches have been developed for the pick-the-winner design but have been criticized for lack of objective comparison among the drug agents. We developed a Bayesian pick-the-winner design by integrating a Bayesian posterior probability with Simon two-stage design in a randomized two-arm clinical trial. The Bayesian posterior probability, as the rule to pick the winner, is defined as probability of the response rate in one arm higher than in the other arm. The posterior probability aims to determine the winner when both arms pass the second stage of the Simon two-stage design. When both arms are competitive (i.e., both passing the second stage), the Bayesian posterior probability performs better to correctly identify the winner compared with the Fisher exact test in the simulation study. In comparison to a standard two-arm randomized design, the Bayesian pick-the-winner design has a higher power to determine a clear winner. In application to two studies, the approach is able to perform statistical comparison of two treatment arms and provides a winner probability (Bayesian posterior probability) to statistically justify the winning arm. We developed an integrated design that utilizes Bayesian posterior probability, Simon two-stage design, and randomization into a unique setting. It gives objective comparisons between the arms to determine the winner.

Exploring Unique Roles for Psychologists

ERIC Educational Resources Information Center

Ahmed, Mohiuddin; Boisvert, Charles M.

2005-01-01

This paper presents comments on "Psychological Treatments" by D. H. Barlow. Barlow highlighted unique roles that psychologists can play in mental health service delivery by providing psychological treatments--treatments that psychologists would be uniquely qualified to design and deliver. In support of Barlow's position, the authors draw from…

Small spacecraft power and thermal subsystems

NASA Technical Reports Server (NTRS)

Eakman, D.; Lambeck, R.; Mackowski, M.; Slifer, L., Jr.

1994-01-01

This white paper provides a general guide to the conceptual design of satellite power and thermal control subsystems with special emphasis on the unique design aspects associated with small satellites. The operating principles of these technologies are explained and performance characteristics of current and projected components are provided. A tutorial is presented on the design process for both power and thermal subsystems, with emphasis on unique issues relevant to small satellites. The ability of existing technology to meet future performance requirements is discussed. Conclusions and observations are presented that stress cost-effective, high-performance design solutions.

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

PubMed

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

40 CFR 1051.625 - What special provisions apply to unique snowmobile designs for small-volume manufacturers?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false What special provisions apply to unique snowmobile designs for small-volume manufacturers? 1051.625 Section 1051.625 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Compliance...

40 CFR 1051.630 - What special provisions apply to unique snowmobile designs for all manufacturers?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false What special provisions apply to unique snowmobile designs for all manufacturers? 1051.630 Section 1051.630 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Compliance Provisions §...

Diabetes Education Needs of Chinese Australians: A Qualitative Study

ERIC Educational Resources Information Center

Choi, Tammie S. T.; Walker, Karen Z.; Ralston, Robin A.; Palermo, Claire

2015-01-01

Objective: The aim of this study was to evaluate a type 2 diabetes education programme for Chinese Australians, based on the experience of participants and by exploring the unique needs of Chinese patients, their health beliefs and their cultural behaviours. Design and setting: A qualitative ethnographic study was undertaken in a community health…

The Heroes' Journey: A Young Couple's Experience with Choriocarcinoma

ERIC Educational Resources Information Center

Marlowe, Dan; Hodgson, Jennifer; Lamson, Angela

2010-01-01

A 20 year retrospective qualitative case study was conducted to investigate the relational impact of choriocarcinoma (a type of gestational cancer) on a couple of child-bearing age. A unique feature to the study was that the primary investigator was the couple's biological son, initiating the first known auto-case study design. Using holistic…

A Water Quality Study in Rutherford County, Tennessee: Student Group Project

ERIC Educational Resources Information Center

James, Rebecca R.; Ogden, Albert E.; DiVincenzo, John P.

2006-01-01

Undergraduate research is the most rewarding way for science students to become exposed to the process of scientific investigation. Water quality studies offer the unique advantages of being easily designed by the students and analytically approachable. This two-part, 14-month study involved several students in the delineation of ground water flow…

The Fun Culture in Seniors' Online Communities

ERIC Educational Resources Information Center

Nimrod, Galit

2011-01-01

Purpose of the study: Previous research found that "fun on line" is the most dominant content in seniors' online communities. The present study aimed to further explore the "fun culture" in these communities and to discover its unique qualities. Design and Methods: The study applied an online ethnography (netnography) approach, utilizing a full…

IPAD: A unique approach to government/industry cooperation for technology development and transfer

NASA Technical Reports Server (NTRS)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

Assessment of Operational Automated Guideway Systems - Airtrans (Phase I)

DOT National Transportation Integrated Search

1976-09-01

This report presents the results of an evaluation study of AIRTRANS, a unique, automated guideway system located at the Dallas/Fort Worth Airport. AIRTRANS was designed to move passengers, employees, baggage, mail, trash and supplies. The newest and ...

Developing a leadership laboratory for nurse managers based on lived experiences: a participatory action research model for leadership development.

PubMed

Mackoff, Barbara L; Glassman, Kimberly; Budin, Wendy

2013-09-01

The aim of the pilot study was to design an innovative model of leadership development, Leadership Laboratory (LL), grounded in the lived experiences and peer best practices of 43 cross-disciplinary nurse managers. The Institute of Medicine/Robert Wood Johnson Foundation study, The Future of Nursing, reinforces the need to prepare nurses for leadership positions. A 1-year participatory action research study was designed to develop 3 LLs involving nurse managers as participants, co-creators, and evaluators of the unique learning format. Analysis of qualitative and quantitative data revealed consistent and significantly positive results in leadership skill areas in all 3 LLs. Participants identified elements that distinguished LLs from traditional seminars and trainings sessions, including opportunities to gain from peer-to peer consultation, strategies, and support. Participants in the 1-year pilot demonstrated significant learning based on postsession and postproject assessments of the LLs. Data also described the unique attributes of a peer-driven approach to leadership development.

A unique all-optic switch based on an innovatively designed liquid crystal waveguide

NASA Astrophysics Data System (ADS)

Nam, Sung-Hyun; Su, Wei-Hung; Chavez, Jesus; Yin, Shizhuo

2003-10-01

A unique, all-optic switch based on an innovatively designed planar lightwave circuit (PLC) is presented in this paper. The switching function is achieved by using ultra large birefringence of nematic liquid crystals (NLC) filled at the trench of waveguides. The trench at the crossing forms a waveguide mirror or a matching medium when extraordinary and ordinary refractive indices of NLC are employed, respectively. The major advantages of our unique design are: (1) the limitation that refractive index of liquid crystal must be less than that of waveguide material itself is eliminated so that conventional NCL material such as E7 can be used; (2) it is a self aligned fabrication process that alleviates the tight tolerance of later tilt error; (3) the design is thermally stable. The successful fabrication of this unqiue switch could result in an enabling element for the next generation all-optic networks.

Developing Instructional Leaders through Assistant Principals' Academy: A Partnership for Success

ERIC Educational Resources Information Center

Gurley, D. Keith; Anast-May, Linda; Lee, H. T.

2015-01-01

This article describes findings from a single-case qualitative study of a unique 2-year professional development academy for practicing assistant principals designed and implemented in partnership between school district personnel and university educational leadership faculty members. The study was conducted based on the theoretical framework of…

The ̅PANDA Detector at FAIR

NASA Astrophysics Data System (ADS)

Ikegami Andersson, W.; ̅PANDA Collaboration

2016-11-01

The future ̅PANDA detector at FAIR is a state-of-the-art internal target detector designed for strong interaction studies. By utilizing an antiproton beam, a rich and unique physics programme is planned. The ̅PANDA experiment, as well as feasibility studies for hyperon and charmonium physics, are discussed.

Faculty Teaching Perspectives about an Urban-Focused Teacher Education Program

ERIC Educational Resources Information Center

Ukpokodu, Omiunota N.

2017-01-01

This qualitative study investigates the perspectives of faculty teaching engagement in a uniquely designed, collaborative urban-focused teacher education program. The study analyzes interviews conducted with seven participating faculty from both the School of Education and the College of Arts and Sciences in an urban university. The findings…

STS ancillary equipment study. User reference book

NASA Technical Reports Server (NTRS)

Plough, J. A.

1977-01-01

A record of what is currently known about STS ancillary equipment is presented in this user-oriented design so that a potential user may evaluate whether he could use the described ancillary equipment or if he would need to design and fabricate a payload-unique item. References that the user can use to obtain additional details and requirements to aid in his evaluation and decision are included.

Charge-coupled device image sensor study

NASA Technical Reports Server (NTRS)

1973-01-01

The design specifications and predicted performance characteristics of a Charge-Coupled Device Area Imager and a Charge-Coupled Device Linear Imager are presented. The Imagers recommended are intended for use in space-borne imaging systems and therefore would meet the requirements for the intended application. A unique overlapping metal electrode structure and a buried channel structure are described. Reasons for the particular imager designs are discussed.

Expansion of Biology Teachers' Pedagogical Content Knowledge (PCK) During a Long-Term Professional Development Program

NASA Astrophysics Data System (ADS)

Rozenszajn, Ronit; Yarden, Anat

2014-02-01

Experienced teachers possess a unique teaching knowledge comprised of an inter-related set of knowledge and beliefs that gives direction and justification to a teacher's actions. This study examined the expansion of two components of pedagogical content knowledge (PCK) of three in-service teachers in the course of a professional development program aimed at designing new teaching and learning materials suggested by the teachers themselves. The research presents an enlargement of previous PCK representations by focusing on a detailed representation of two main PCK domains: teaching and learning, including ten PCK components that emerged in the course of data analysis. This representation enabled revealing the unique PCK held by each teacher and to characterize the expansion of the two components of the participating teachers' PCK during the long-term professional development program. Retention of major parts of the expanded PCK a year after termination of the program implies that designing and implementing new teaching and learning materials based on the teachers' experiences, needs, and knowledge in a workshop format accompanied by biology and science education courses might provide a powerful means for PCK expansion. We recommend that designers of professional development programs be aware of the unique PCK held by each teacher in order to promote meaningful professional development of each teacher. Moreover, the PCK representations that were identified in the course of this study enabled clarifying the "orientation toward teaching science" category of PCK which appears to be unclear in current literature.

Proposed uses of laser light scattering instruments for polymerization studies

NASA Technical Reports Server (NTRS)

Mathias, Lon J.; Hoyle, Charles E.; Mclaughlin, Kevin; Mcmanus, Samuel P.; Caruthers, James M.; Runge, Michael L.

1989-01-01

Microgravity offers a unique environment for studying polymer diffusion and polymer polymerization reactions. The absence of convection currents, which are the major mode of mixing at the molecular level on Earth, are eliminated or reduced in the microgravity environment. More importantly, the prediction of unique copolymer composition development in microgravity allows controlled formation of new compositions of matter. The absence of mixing at the molecular level should produce unique short block copolymers available for the first time for comonomer compositions which normally lead to random or long block copolymer under good mixing. The investigation of fundamental polymer diffusion and polymer polymerization processes in microgravity is proposed. This effort will involve fundamental studies of monomer and polymer diffusion; their effects on initiation, propagation, and especially termination kinetics rate constant; and the accurate evaluation of copolymerization reactivity ratios in microgravity. The experimental design is presented for these studies along with an evaluation technique for in situ monitoring of polymer diffusion and polymerization kinetics.

Development and approach to low-frequency microgravity isolation systems

NASA Technical Reports Server (NTRS)

Grodsinsky, Carlos M.

1990-01-01

The low-gravity environment provided by space flight has afforded the science community a unique arena for the study of fundamental and technological sciences. However, the dynamic environment observed on space shuttle flights and predicted for Space Station Freedom has complicated the analysis of prior microgravity experiments and prompted concern for the viability of proposed space experiments requiring long-term, low-gravity environments. Thus, isolation systems capable of providing significant improvements to this random environment are being developed. The design constraints imposed by acceleration-sensitive, microgravity experiment payloads in the unique environment of space and a theoretical background for active isolation are discussed. A design is presented for a six-degree-of-freedom, active, inertial isolation system based on the baseline relative and inertial isolation techniques described.

Corrosion-resistant high-entropy alloys: A review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shi, Yunzhu; Yang, Bin; Liaw, Peter

Corrosion destroys more than three percent of the world’s gross domestic product. Therefore, the design of highly corrosion-resistant materials is urgently needed. By breaking the classical alloy-design philosophy, high-entropy alloys (HEAs) possess unique microstructures, which are solid solutions with random arrangements of multiple elements. The particular locally-disordered chemical environment is expected to lead to unique corrosion-resistant properties. In this review, the studies of the corrosion-resistant HEAs during the last decade are summarized. The corrosion-resistant properties of HEAs in various aqueous environments and the corrosion behavior of HEA coatings are presented. The effects of environments, alloying elements, and processing methods onmore » the corrosion resistance are analyzed in detail. Finally, the possible directions of future work regarding the corrosion behavior of HEAs are suggested.« less

Development and Testing of a Methane/Oxygen Catalytic Microtube Ignition System for Rocket Propulsion

NASA Technical Reports Server (NTRS)

Deans, Matthew

2012-01-01

This study sought to develop a catalytic ignition advanced torch system with a unique catalyst microtube design that could serve as a low energy alternative or redundant system for the ignition of methane and oxygen rockets. Development and testing of iterations of hardware was carried out to create a system that could operate at altitude and produce a torch. A unique design was created that initiated ignition via the catalyst and then propagated into external staged ignition. This system was able to meet the goals of operating across a range of atmospheric and altitude conditions with power inputs on the order of 20 to 30 watts with chamber pressures and mass flow rates typical of comparable ignition systems for a 100 lbf engine.

From Design to Dissemination: Implementing Community-Based Participatory Research in Postdisaster Communities

PubMed Central

Kennedy, Suzanne; Krouse, Rebecca Z.; Grimsley, Faye; El-Dahr, Jane; Bordelon, Keith; Sterling, Yvonne; White, LuAnn; Barlow, Natasha; DeGruy, Shannon; Paul, Dorothy; Denham, Stacey; Hayes, Claire; Sanders, Margaret; Mvula, Mosanda M.; Thornton, Eleanor; Chulada, Patricia; Mitchell, Herman; Martin, William J.; Stephens, Kevin U.; Cohn, Richard D.

2016-01-01

Objectives. To review how disasters introduce unique challenges to conducting population-based research and community-based participatory research (CBPR). Methods. From 2007–2009, we conducted the Head-off Environmental Asthma in Louisiana (HEAL) Study in the aftermath of Hurricane Katrina in a Gulf Coast community facing an unprecedented triple burden: Katrina’s and other disasters’ impact on the environment and health, historic health disparities, and persistent environmental health threats. Results. The unique triple burden influenced every research component; still, most existing CBPR principles were applicable, even though full adherence was not always feasible and additional tailored principles govern postdisaster settings. Conclusions. Even in the most challenging postdisaster conditions, CBPR can be successfully designed, implemented, and disseminated while adhering to scientific rigor. PMID:27196662

Corrosion-resistant high-entropy alloys: A review

DOE PAGES

Shi, Yunzhu; Yang, Bin; Liaw, Peter

2017-02-05

Corrosion destroys more than three percent of the world’s gross domestic product. Therefore, the design of highly corrosion-resistant materials is urgently needed. By breaking the classical alloy-design philosophy, high-entropy alloys (HEAs) possess unique microstructures, which are solid solutions with random arrangements of multiple elements. The particular locally-disordered chemical environment is expected to lead to unique corrosion-resistant properties. In this review, the studies of the corrosion-resistant HEAs during the last decade are summarized. The corrosion-resistant properties of HEAs in various aqueous environments and the corrosion behavior of HEA coatings are presented. The effects of environments, alloying elements, and processing methods onmore » the corrosion resistance are analyzed in detail. Finally, the possible directions of future work regarding the corrosion behavior of HEAs are suggested.« less

Development and Testing of a Methane/Oxygen Catalytic Microtube Ignition System for Rocket Propulsion

NASA Technical Reports Server (NTRS)

Deans, Matthew C.; Schneider, Steven J.

2012-01-01

This study sought to develop a catalytic ignition advanced torch system with a unique catalyst microtube design that could serve as a low energy alternative or redundant system for the ignition of methane and oxygen rockets. Development and testing of iterations of hardware was carried out to create a system that could operate at altitude and produce a torch. A unique design was created that initiated ignition via the catalyst and then propagated into external staged ignition. This system was able to meet the goals of operating across a range of atmospheric and altitude conditions with power inputs on the order of 20 to 30 watts with chamber pressures and mass flow rates typical of comparable ignition systems for a 100 Ibf engine.

Internet Gaming Disorder Explains Unique Variance in Psychological Distress and Disability After Controlling for Comorbid Depression, OCD, ADHD, and Anxiety.

PubMed

Pearcy, Benjamin T D; McEvoy, Peter M; Roberts, Lynne D

2017-02-01

This study extends knowledge about the relationship of Internet Gaming Disorder (IGD) to other established mental disorders by exploring comorbidities with anxiety, depression, Attention Deficit Hyperactivity Disorder (ADHD), and obsessive compulsive disorder (OCD), and assessing whether IGD accounts for unique variance in distress and disability. An online survey was completed by a convenience sample that engages in Internet gaming (N = 404). Participants meeting criteria for IGD based on the Personal Internet Gaming Disorder Evaluation-9 (PIE-9) reported higher comorbidity with depression, OCD, ADHD, and anxiety compared with those who did not meet the IGD criteria. IGD explained a small proportion of unique variance in distress (1%) and disability (3%). IGD accounted for a larger proportion of unique variance in disability than anxiety and ADHD, and a similar proportion to depression. Replications with clinical samples using longitudinal designs and structured diagnostic interviews are required.

Open-source hardware for medical devices

PubMed Central

2016-01-01

Open-source hardware is hardware whose design is made publicly available so anyone can study, modify, distribute, make and sell the design or the hardware based on that design. Some open-source hardware projects can potentially be used as active medical devices. The open-source approach offers a unique combination of advantages, including reducing costs and faster innovation. This article compares 10 of open-source healthcare projects in terms of how easy it is to obtain the required components and build the device. PMID:27158528

On some properties of bone functional adaptation phenomenon useful in mechanical design.

PubMed

Nowak, Michał

2010-01-01

The paper discusses some unique properties of trabecular bone functional adaptation phenomenon, useful in mechanical design. On the basis of the biological process observations and the principle of constant strain energy density on the surface of the structure, the generic structural optimisation system has been developed. Such approach allows fulfilling mechanical theorem for the stiffest design, comprising the optimisations of size, shape and topology, using the concepts known from biomechanical studies. Also the biomimetic solution of multiple load problems is presented.

Open-source hardware for medical devices.

PubMed

Niezen, Gerrit; Eslambolchilar, Parisa; Thimbleby, Harold

2016-04-01

Open-source hardware is hardware whose design is made publicly available so anyone can study, modify, distribute, make and sell the design or the hardware based on that design. Some open-source hardware projects can potentially be used as active medical devices. The open-source approach offers a unique combination of advantages, including reducing costs and faster innovation. This article compares 10 of open-source healthcare projects in terms of how easy it is to obtain the required components and build the device.

The challenge of doing science in wilderness: historical, legal, and policy context

Treesearch

Peter Landres; Judy Alderson; David J. Parsons

2003-01-01

Lands designated by Congress under the Wilderness Act of 1964 (Public Law 88-577) offer unique opportunities for social and biophysical research in areas that are relatively unmodified by modern human actions. Wilderness designation also imposes a unique set of constraints on the methods that may be used or permitted to conduct this research. For example, legislated...

Designing Uniquely Addressable Bio-orthogonal Synthetic Scaffolds for DNA and RNA Origami.

PubMed

Kozyra, Jerzy; Ceccarelli, Alessandro; Torelli, Emanuela; Lopiccolo, Annunziata; Gu, Jing-Ying; Fellermann, Harold; Stimming, Ulrich; Krasnogor, Natalio

2017-07-21

Nanotechnology and synthetic biology are rapidly converging, with DNA origami being one of the leading bridging technologies. DNA origami was shown to work well in a wide array of biotic environments. However, the large majority of extant DNA origami scaffolds utilize bacteriophages or plasmid sequences thus severely limiting its future applicability as a bio-orthogonal nanotechnology platform. In this paper we present the design of biologically inert (i.e., "bio-orthogonal") origami scaffolds. The synthetic scaffolds have the additional advantage of being uniquely addressable (unlike biologically derived ones) and hence are better optimized for high-yield folding. We demonstrate our fully synthetic scaffold design with both DNA and RNA origamis and describe a protocol to produce these bio-orthogonal and uniquely addressable origami scaffolds.

Study unique artistic lopburi province for design brass tea set of bantahkrayang community

NASA Astrophysics Data System (ADS)

Pliansiri, V.; Seviset, S.

2017-07-01

The objectives of this study were as follows: 1) to study the production process of handcrafted Brass Tea Set; and 2) to design and develop the handcrafted of Brass Tea Set. The process of design was started by mutual analytical processes and conceptual framework for product design, Quality Function Deployment, Theory of Inventive Problem Solving, Principles of Craft Design, and Principle of Reverse Engineering. The experts in field of both Industrial Product Design and Brass Handicraft Product, have evaluated the Brass Tea Set design and created prototype of Brass tea set by the sample of consumers who have ever bought the Brass Tea Set of Bantahkrayang Community on this research. The statistics methods used were percentage, mean ({{{\\overline X}} = }) and standard deviation (S.D.) 3. To assess consumer satisfaction toward of handcrafted Brass tea set was at the high level.

Cryogenic wind tunnels: Unique capabilities for the aerodynamicist

NASA Technical Reports Server (NTRS)

Hall, R. M.

1976-01-01

The cryogenic wind-tunnel concept as a practical means for improving ground simulation of transonic flight conditions. The Langley 1/3-meter transonic cryogenic tunnel is operational, and the design of a cryogenic National Transonic Facility is undertaken. A review of some of the unique capabilities of cryogenic wind tunnels is presented. In particular, the advantages of having independent control of tunnel Mach number, total pressure, and total temperature are highlighted. This separate control over the three tunnel parameters will open new frontiers in Mach number, Reynolds number, aeroelastic, and model-tunnel interaction studies.

Through Alice's Looking Glass: Studying Ourselves To Learn More about Our Students.

ERIC Educational Resources Information Center

Abernathy, Tammy V.; Agey, Teresa

A teacher of a graduate course in severe learning disabilities developed a guided self-study project designed to move her students from a vocabulary-laden understanding of disability to an understanding of their students' unique and complex ways of learning. Self-study activities included learning about one's own learning style and how that…

Finding Ways to Teach to Students with FASD: A Research Study

ERIC Educational Resources Information Center

Edmonds, Kelly; Crichton, Susan

2008-01-01

This study examines a unique educational program designed for youth with Fetal Alcohol Spectrum Disorder [FASD] in Alberta, Canada. Care was taken to include the participants' voice in this case study resulting in key insights and strategies for working with youth and/or students struggling with FASD. Using observation notes, survey and interview…

Landmarks selection in street map design

NASA Astrophysics Data System (ADS)

Kao, C. J.

2014-02-01

In Taiwan many electrical maps present their landmarks according to the category of the feature, a designer short of knowledge about mental representation of space, can cause the map to lose its communication effects. To resolve this map design problem, in this research through long-term memory recall, navigation and observation, and short-term memory processing 111 participants were asked to select the proper landmark from study area. The results reveal that in Taiwan convenience stores are the most popular local landmark in rural and urban areas. Their commercial signs have a unique design and bright color. Contrasted to their background, this makes the convenience store a salient feature. This study also developed a rule to assess the priority of the landmarks to design them in different scale maps.

A unique dosing system for the production of OH under high vacuum for the study of environmental heterogeneous reactions.

PubMed

Brown, Matthew A; Johánek, Viktor; Hemminger, John C

2008-02-01

A unique dosing system for the production of hydroxyl radicals under high vacuum for the study of environmental heterogeneous reactions is described. Hydroxyl radicals are produced by the photodissociation of a hydrogen peroxide aqueous gas mixture with 254 nm radiation according to the reaction H2O2+hnu (254 nm)-->OH+OH. Under the conditions of the current design, 0.6% conversion of hydrogen peroxide is expected yielding a hydroxyl number density on the order of 10(10) molecules/cm3. The flux distribution of the dosing system is calculated using a Monte Carlo simulation method and compared with the experimentally determined results. The performance of this unique hydroxyl dosing system is demonstrated for the heterogeneous reaction with a solid surface of potassium iodide. Coupling of the hydroxyl radical dosing system to a quantitative surface analysis system should help provide molecular level insight into detailed reaction mechanisms.

cual-id: Globally Unique, Correctable, and Human-Friendly Sample Identifiers for Comparative Omics Studies.

PubMed

Chase, John H; Bolyen, Evan; Rideout, Jai Ram; Caporaso, J Gregory

2016-01-01

The number of samples in high-throughput comparative "omics" studies is increasing rapidly due to declining experimental costs. To keep sample data and metadata manageable and to ensure the integrity of scientific results as the scale of these projects continues to increase, it is essential that we transition to better-designed sample identifiers. Ideally, sample identifiers should be globally unique across projects, project teams, and institutions; short (to facilitate manual transcription); correctable with respect to common types of transcription errors; opaque, meaning that they do not contain information about the samples; and compatible with existing standards. We present cual-id, a lightweight command line tool that creates, or mints, sample identifiers that meet these criteria without reliance on centralized infrastructure. cual-id allows users to assign universally unique identifiers, or UUIDs, that are globally unique to their samples. UUIDs are too long to be conveniently written on sampling materials, such as swabs or microcentrifuge tubes, however, so cual-id additionally generates human-friendly 4- to 12-character identifiers that map to their UUIDs and are unique within a project. By convention, we use "cual-id" to refer to the software, "CualID" to refer to the short, human-friendly identifiers, and "UUID" to refer to the globally unique identifiers. CualIDs are used by humans when they manually write or enter identifiers, while the longer UUIDs are used by computers to unambiguously reference a sample. Finally, cual-id optionally generates printable label sticker sheets containing Code 128 bar codes and CualIDs for labeling of sample collection and processing materials. IMPORTANCE The adoption of identifiers that are globally unique, correctable, and easily handwritten or manually entered into a computer will be a major step forward for sample tracking in comparative omics studies. As the fields transition to more-centralized sample management, for example, across labs within an institution, across projects funded under a common program, or in systems designed to facilitate meta- and/or integrated analysis, sample identifiers generated with cual-id will not need to change; thus, costly and error-prone updating of data and metadata identifiers will be avoided. Further, using cual-id will ensure that transcription errors in sample identifiers do not require the discarding of otherwise-useful samples that may have been expensive to obtain. Finally, cual-id is simple to install and use and is free for all use. No centralized infrastructure is required to ensure global uniqueness, so it is feasible for any lab to get started using these identifiers within their existing infrastructure.

Trade Studies for a Manned High-Power Nuclear Electric Propulsion Vehicle

NASA Technical Reports Server (NTRS)

SanSoucie, Michael; Hull, Patrick V.; Irwin, Ryan W.; TInker, Michael L.; Patton, Bruce W.

2005-01-01

Nuclear electric propulsion (NEP) vehicles will be needed for future manned missions to Mars and beyond. Candidate vehicles must be identified through trade studies for further detailed design from a large array of possibilities. Genetic algorithms have proven their utility in conceptual design studies by effectively searching a large design space to pinpoint unique optimal designs. This research combines analysis codes for NEP subsystems with genetic algorithm-based optimization. Trade studies for a NEP reference mission to the asteroids were conducted to identify important trends, and to determine the effects of various technologies and subsystems on vehicle performance. It was found that the electric thruster type and thruster performance have a major impact on the achievable system performance, and that significant effort in thruster research and development is merited.

Implications of complex adaptive systems theory for the design of research on health care organizations

PubMed Central

McDaniel, Reuben R.; Lanham, Holly Jordan; Anderson, Ruth A.

2013-01-01

Background Because health care organizations (HCOs) are complex adaptive systems (CASs), phenomena of interest often are dynamic and unfold in unpredictable ways, and unfolding events are often unique. Researchers of HCOs may recognize that the subject of their research is dynamic; however, their research designs may not take this into account. Researchers may also know that unfolding events are often unique, but their design may not have the capacity to obtain information from meager evidence. Purpose These two concerns led us to examine two ideas from organizational theory: (a) the ideas of K. E. Weick (1993) on organizational design as a verb and (b) the ideas of J. G. March, L. S. Sproull, and M. Tamuz (1991) on learning from samples of one or fewer. In this article, we applied these ideas to develop an enriched perspective of research design for studying CASs. Methodology/Approach We conducted a theoretical analysis of organizations as CASs, identifying relevant characteristics for research designs. We then explored two ideas from organizational theory and discussed the implications for research designs. Findings Weick's idea of “design as a verb” helps in understanding dynamic and process-oriented research design. The idea of “learning from samples of one or fewer” of March, Sproull, and Tamuz provides strategies for research design that enables learning from meager evidence. When studying HCOs, research designs are likely to be more effective when they (a) anticipate change, (b) include tension, (c) capitalize on serendipity, and (d) use an “act-then-look” mind set. Implications for practice are discussed. Practice Implications Practitioners who understand HCOs as CASs will be cautious in accepting findings from studies that treat HCOs mechanistically. They will consider the characteristics of CAS when evaluating the evidence base for practice. Practitioners can use the strategies proposed in this article to stimulate discussion with researchers seeking to conduct research in their HCO. PMID:19322050

Implications of complex adaptive systems theory for the design of research on health care organizations.

PubMed

McDaniel, Reuben R; Lanham, Holly Jordan; Anderson, Ruth A

2009-01-01

Because health care organizations (HCOs) are complex adaptive systems (CASs), phenomena of interest often are dynamic and unfold in unpredictable ways, and unfolding events are often unique. Researchers of HCOs may recognize that the subject of their research is dynamic; however, their research designs may not take this into account. Researchers may also know that unfolding events are often unique, but their design may not have the capacity to obtain information from meager evidence. These two concerns led us to examine two ideas from organizational theory: (a) the ideas of K. E. Weick (1993) on organizational design as a verb and (b) the ideas of J. G. March, L. S. Sproull, and M. Tamuz (1991) on learning from samples of one or fewer. In this article, we applied these ideas to develop an enriched perspective of research design for studying CASs. We conducted a theoretical analysis of organizations as CASs, identifying relevant characteristics for research designs. We then explored two ideas from organizational theory and discussed the implications for research designs. Weick's idea of "design as a verb" helps in understanding dynamic and process-oriented research design. The idea of "learning from samples of one or fewer" of March, Sproull, and Tamuz provides strategies for research design that enables learning from meager evidence. When studying HCOs, research designs are likely to be more effective when they (a) anticipate change, (b) include tension, (c) capitalize on serendipity, and (d) use an "act-then-look" mind set. Implications for practice are discussed. Practitioners who understand HCOs as CASs will be cautious in accepting findings from studies that treat HCOs mechanistically. They will consider the characteristics of CAS when evaluating the evidence base for practice. Practitioners can use the strategies proposed in this article to stimulate discussion with researchers seeking to conduct research in their HCO.

The results of studies to determine the impact of far-aft center-of-gravity locations on the design of a single-stage-to-orbit vehicle system

NASA Technical Reports Server (NTRS)

Freeman, D. C., Jr.; Powell, R. W.

1979-01-01

Aft center-of-gravity locations dictated by the large number of rocket engines required has been a continuing problem of single-stage-to-orbit vehicles. Recent work at Langley has demonstrated that these aft center-of-gravity problems become more pronounced for the proposed heavy-lift mission, creating some unique design problems for both the SSTO and staged vehicle systems. During the course of this study, an effort was made to bring together automated vehicle design, wind-tunnel tests, and flight control analyses to assess the impact of longitudinal and lateral-directional instability, and control philosophy on entry vehicle design technology.

Stirling Isotope Power Systems for Stationary and Mobile Lunar Applications

NASA Technical Reports Server (NTRS)

Schmitz, Paul C.; Penswick, L. Barry; Shaltens, Richard K.

2007-01-01

The NASA Exploration Systems Architecture Study (ESAS) places a significant emphasis on the development of a wide range of capabilities on the lunar surface as a stepping-stone to further space exploration. An important aspect of developing these capabilities will be the availability of reliable, efficient, and low-mass power systems to support both stationary and mobile applications. One candidate system to provide electrical power is made by coupling the General Purpose Heat Source (GPHS) with a high-performance Stirling convertor. In this paper we explore the practical power range of GPHS/Stirling convertor systems all with conductively coupled hot-end designs for use on the lunar surface. Design and off-design operations during the life of the convertor are studied in addition to considering these varying conditions on system. Unique issues concerning Stirling convertor configurations, integration of the GPHS with the Stirling convertor, controller operation, waste heat rejection, and thermal protection are explored. Of particular importance in the evaluation process is a thorough understanding of the interactions between the wide range of unique lunar environments and the selection of key systems operating characteristics and the power systems design. Additionally, as power levels rise the interface between the GPHS and Stirling and the Stirling and the radiator begins to dominate system mass and material selection becomes more important.

First Studies for the Development of Computational Tools for the Design of Liquid Metal Electromagnetic Pumps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maidana, Carlos O.; Nieminen, Juha E.

Liquid alloy systems have a high degree of thermal conductivity, far superior to ordinary nonmetallic liquids and inherent high densities and electrical conductivities. This results in the use of these materials for specific heat conducting and dissipation applications for the nuclear and space sectors. Uniquely, they can be used to conduct heat and electricity between nonmetallic and metallic surfaces. The motion of liquid metals in strong magnetic fields generally induces electric currents, which, while interacting with the magnetic field, produce electromagnetic forces. Electromagnetic pumps exploit the fact that liquid metals are conducting fluids capable of carrying currents, which is amore » source of electromagnetic fields useful for pumping and diagnostics. The coupling between the electromagnetics and thermo-fluid mechanical phenomena and the determination of its geometry and electrical configuration, gives rise to complex engineering magnetohydrodynamics problems. The development of tools to model, characterize, design, and build liquid metal thermomagnetic systems for space, nuclear, and industrial applications are of primordial importance and represent a cross-cutting technology that can provide unique design and development capabilities as well as a better understanding of the physics behind the magneto-hydrodynamics of liquid metals. Here, first studies for the development of computational tools for the design of liquid metal electromagnetic pumps are discussed.« less

First Studies for the Development of Computational Tools for the Design of Liquid Metal Electromagnetic Pumps

DOE PAGES

Maidana, Carlos O.; Nieminen, Juha E.

2017-02-01

Liquid alloy systems have a high degree of thermal conductivity, far superior to ordinary nonmetallic liquids and inherent high densities and electrical conductivities. This results in the use of these materials for specific heat conducting and dissipation applications for the nuclear and space sectors. Uniquely, they can be used to conduct heat and electricity between nonmetallic and metallic surfaces. The motion of liquid metals in strong magnetic fields generally induces electric currents, which, while interacting with the magnetic field, produce electromagnetic forces. Electromagnetic pumps exploit the fact that liquid metals are conducting fluids capable of carrying currents, which is amore » source of electromagnetic fields useful for pumping and diagnostics. The coupling between the electromagnetics and thermo-fluid mechanical phenomena and the determination of its geometry and electrical configuration, gives rise to complex engineering magnetohydrodynamics problems. The development of tools to model, characterize, design, and build liquid metal thermomagnetic systems for space, nuclear, and industrial applications are of primordial importance and represent a cross-cutting technology that can provide unique design and development capabilities as well as a better understanding of the physics behind the magneto-hydrodynamics of liquid metals. Here, first studies for the development of computational tools for the design of liquid metal electromagnetic pumps are discussed.« less

Just "Slammin!" Adolescents' Construction of Identity through Performance Poetry

ERIC Educational Resources Information Center

Rudd, Lynn L.

2012-01-01

Using a case study design, this study investigated the literacy identity, both collectively and individually, of the members of "Slammin!", a slam poetry team from an urban high school. Participant observation of practices and performances was used to find how the involvement in this group uniquely impacted students' academic and personal lives.…

A Field Observation on the Philosophy of Teaching Islamic and Arabic Studies

ERIC Educational Resources Information Center

Yaakub, Muhamadul Bakir Hj.

2009-01-01

Implementation of educational policy in designing curriculum details stands as a basis of conceptual educational practice. It is for sure involved time and space factors to become comprehensive and constructive, especially for teaching Islamic and Arabic studies within modern educational challenges where its uniqueness values in nature should be…

Research into Practice: The Influence of Discourse Studies on Language Descriptions and Task Design in Published ELT Materials

ERIC Educational Resources Information Center

Gilmore, Alex

2015-01-01

Discourse studies is a vast, multidisciplinary, and rapidly expanding area of research, embracing a range of approaches including discourse analysis, corpus analysis, conversation analysis, interactional sociolinguistics, critical discourse analysis, genre analysis and multimodal discourse analysis. Each approach offers its own unique perspective…

Design concept for α-hydrogen-substituted nitroxides.

PubMed

Amar, Michal; Bar, Sukanta; Iron, Mark A; Toledo, Hila; Tumanskii, Boris; Shimon, Linda J W; Botoshansky, Mark; Fridman, Natalia; Szpilman, Alex M

2015-02-06

Stable nitroxides (nitroxyl radicals) have many essential and unique applications in chemistry, biology and medicine. However, the factors influencing their stability are still under investigation, and this hinders the design and development of new nitroxides. Nitroxides with tertiary alkyl groups are generally stable but obviously highly encumbered. In contrast, α-hydrogen-substituted nitroxides are generally inherently unstable and rapidly decompose. Herein, a novel, concept for the design of stable cyclic α-hydrogen nitroxides is described, and a proof-of-concept in the form of the facile synthesis and characterization of two diverse series of stable α-hydrogen nitroxides is presented. The stability of these unique α-hydrogen nitroxides is attributed to a combination of steric and stereoelectronic effects by which disproportionation is kinetically precluded. These stabilizing effects are achieved by the use of a nitroxide co-planar substituent in the γ-position of the backbone of the nitroxide. This premise is supported by a computational study, which provides insight into the disproportionation pathways of α-hydrogen nitroxides.

Analysis of microsize particulates

NASA Technical Reports Server (NTRS)

Blanchard, M. B.; Farlow, N. H.; Ferry, G. V.

1972-01-01

Unique methods for analyzing individual particles ranging in size from 0.01 to 1000 micrometers have been developed for investigation of nature of cosmic dust. Methods are applicable to particulate aerosols and contaminants characteristically encountered in studies of air pollution and in experiments designed to abate pollution.

Design for waste-management system

NASA Technical Reports Server (NTRS)

Guarneri, C. A.; Reed, A.; Renman, R.

1973-01-01

Study was made and system defined for water-recovery and solid-waste processing for low-rise apartment complexes. System can be modified to conform with unique requirements of community, including hydrology, geology, and climate. Reclamation is accomplished by treatment process that features reverse-osmosis membranes.

Exploratory studies to decide whether and how to proceed with full-scale evaluations of public health interventions: a systematic review of guidance.

PubMed

Hallingberg, Britt; Turley, Ruth; Segrott, Jeremy; Wight, Daniel; Craig, Peter; Moore, Laurence; Murphy, Simon; Robling, Michael; Simpson, Sharon Anne; Moore, Graham

2018-01-01

Evaluations of complex interventions in public health are frequently undermined by problems that can be identified before the effectiveness study stage. Exploratory studies, often termed pilot and feasibility studies, are a key step in assessing the feasibility and value of progressing to an effectiveness study. Such studies can provide vital information to support more robust evaluations, thereby reducing costs and minimising potential harms of the intervention. This systematic review forms the first phase of a wider project to address the need for stand-alone guidance for public health researchers on designing and conducting exploratory studies. The review objectives were to identify and examine existing recommendations concerning when such studies should be undertaken, questions they should answer, suitable methods, criteria for deciding whether to progress to an effectiveness study and appropriate reporting. We searched for published and unpublished guidance reported between January 2000 and November 2016 via bibliographic databases, websites, citation tracking and expert recommendations. Included papers were thematically synthesized. The search retrieved 4095 unique records. Thirty papers were included, representing 25 unique sources of guidance/recommendations. Eight themes were identified: pre-requisites for conducting an exploratory study, nomenclature, guidance for intervention assessment, guidance surrounding any future evaluation study design, flexible versus fixed design, progression criteria to a future evaluation study, stakeholder involvement and reporting of exploratory studies. Exploratory studies were described as being concerned with the intervention content, the future evaluation design or both. However, the nomenclature and endorsed methods underpinning these aims were inconsistent across papers. There was little guidance on what should precede or follow an exploratory study and decision-making surrounding this. Existing recommendations are inconsistent concerning the aims, designs and conduct of exploratory studies, and guidance is lacking on the evidence needed to inform when to proceed to an effectiveness study. PROSPERO 2016, CRD42016047843.

Mixer-Ejector Wind Turbine: Breakthrough High Efficiency Shrouded Wind Turbine

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-02-22

Broad Funding Opportunity Announcement Project: FloDesign Wind Turbine’s innovative wind turbine, inspired by the design of jet engines, could deliver 300% more power than existing wind turbines of the same rotor diameter by extracting more energy over a larger area. FloDesign Wind Turbine’s unique shrouded design expands the wind capture area, and the mixing vortex downstream allows more energy to flow through the rotor without stalling the turbine. The unique rotor and shrouded design also provide significant opportunity for mass production and simplified assembly, enabling mid-scale turbines (approximately 100 kW) to produce power at a cost that is comparable tomore » larger-scale conventional turbines.« less

Preliminary Design of a Manned Nuclear Electric Propulsion Vehicle Using Genetic Algorithms

NASA Technical Reports Server (NTRS)

Irwin, Ryan W.; Tinker, Michael L.

2005-01-01

Nuclear electric propulsion (NEP) vehicles will be needed for future manned missions to Mars and beyond. Candidate designs must be identified for further detailed design from a large array of possibilities. Genetic algorithms have proven their utility in conceptual design studies by effectively searching a large design space to pinpoint unique optimal designs. This research combined analysis codes for NEP subsystems with a genetic algorithm. The use of penalty functions with scaling ratios was investigated to increase computational efficiency. Also, the selection of design variables for optimization was considered to reduce computation time without losing beneficial design search space. Finally, trend analysis of a reference mission to the asteroids yielded a group of candidate designs for further analysis.

Performable Case Studies in Ethics Education.

PubMed

Robeson, Richard; King, Nancy M P

2017-09-12

Bioethics education often includes the study of short stories, novels, plays, and films, because such materials present case examples that can highlight relevant issues and questions especially vividly for a wide range of students. In addition, creative writing is widely used in the education of health professional students and in continuing education settings for health professionals. There are very few academic or professional disciplines that do not use case studies, but the case study in dialogic form has not been standard practice for thousands of years. Dramatic arts casuistry-the creation and performance of short case studies designed specifically to raise bioethics issues for discussion-represents an application of literature and the medical humanities that is both unique and uniquely valuable. This essay describes the development and history of a course that has been successfully taught to medical students and graduate bioethics students, in which the class researches, writes, and performs a case study designed to elicit reflection and discussion about a topic and set of bioethics issues of current interest to both academic and general audiences. The model is also suited to the presentation and discussion of existing case studies, both live and via on-demand audio.

Performable Case Studies in Ethics Education

PubMed Central

Robeson, Richard; King, Nancy M. P.

2017-01-01

Bioethics education often includes the study of short stories, novels, plays, and films, because such materials present case examples that can highlight relevant issues and questions especially vividly for a wide range of students. In addition, creative writing is widely used in the education of health professional students and in continuing education settings for health professionals. There are very few academic or professional disciplines that do not use case studies, but the case study in dialogic form has not been standard practice for thousands of years. Dramatic arts casuistry—the creation and performance of short case studies designed specifically to raise bioethics issues for discussion—represents an application of literature and the medical humanities that is both unique and uniquely valuable. This essay describes the development and history of a course that has been successfully taught to medical students and graduate bioethics students, in which the class researches, writes, and performs a case study designed to elicit reflection and discussion about a topic and set of bioethics issues of current interest to both academic and general audiences. The model is also suited to the presentation and discussion of existing case studies, both live and via on-demand audio. PMID:28895903

Design of a Family Study Among High-Risk Caribbean Hispanics: The Northern Manhattan Family Study

PubMed Central

Sacco, Ralph L.; Sabala, Edison A.; Rundek, Tanja; Juo, Suh-Hang Hank; Huang, Jinaping Sam; DiTullio, Marco; Homma, Shunichi; Almonte, Katihurka; Lithgow, Carlos García; Boden-Albala, Bernadette

2008-01-01

Stroke continues to kill disproportionately more Blacks and Hispanics than Whites in the United States. Racial/ethnic variations in the incidence of stroke and prevalence of stroke risk factors are probably explained by both genetic and environmental influences. Family studies can help identify genetic predisposition to stroke and potential stroke precursors. Few studies have evaluated the heritability of these stroke risk factors among non-White populations, and none have focused on Caribbean Hispanic populations. The aim of the Northern Manhattan Family Study (NOMAFS) is to investigate the gene-environment interaction of stroke risk factors among Caribbean Hispanics. The unique recruitment and methodologic approaches used in this study are relevant to the design and conduct of genetic aggregation studies to investigate complex genetic disorders in non-White populations. The aim of this paper is to describe the NOMAFS and report enrollment and characteristics of the participants. The NO-MAFS will provide a data resource for the exploration of the genetic determinants of highly heritable stroke precursor phenotypes that are less complex than the stroke phenotype. Understanding the gene environment interaction is the critical next step toward the development of new and unique approaches to disease prevention and interventions. PMID:17682370

Engine design considerations for 2nd generation supersonic transports

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

The environmental and economic goals projected for advanced supersonic transports will require revolutionary improvements in propulsion systems. Variable cycle engine concepts that incorporate unique components and advanced technologies show promise in meeting these goals. Pratt & Whitney Aircraft is conducting conceptual design studies of variable cycle engine concepts under NASA sponsorship. This paper reviews some of the design considerations for these engine concepts. Emphasis is placed on jet noise abatement, reduction of emissions, performance improvements, installation considerations, hot-section characteristics and control system requirements. Two representative variable cycle engine concepts that incorporate these basic design considerations are described.

An MBE growth facility for real-time in situ synchrotron x-ray topography studies of strained-layer III-V epitaxial materials

NASA Astrophysics Data System (ADS)

Whitehouse, C. R.; Barnett, S. J.; Soley, D. E. J.; Quarrell, J.; Aldridge, S. J.; Cullis, A. G.; Emeny, M. T.; Johnson, A. D.; Clarke, G. F.; Lamb, W.; Tanner, B. K.; Cottrell, S.; Lunn, B.; Hogg, C.; Hagston, W.

1992-01-01

This paper describes a unique combined UHV MBE growth x-ray topography facility designed to allow the first real-time synchrotron radiation x-ray topography study of strained-layer III-V growth processes. This system will enable unambiguous determination of dislocation nucleation and multiplication processes as a function of controlled variations in growth conditions, and also during post-growth thermal processing. The planned experiments have placed very stringent demands upon the engineering design of the system, and design details regarding the growth chamber; sample manipulator, x-ray optics, and real-time imaging systems are described. Results obtained during a feasibility study are also presented.

An MBE growth facility for real-time in situ synchrotron x-ray topography studies of strained-layer III--V epitaxial materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitehouse, C.R.; Barnett, S.J.; Soley, D.E.J.

1992-01-01

This paper describes a unique combined UHV MBE growth x-ray topography facility designed to allow the first real-time synchrotron radiation x-ray topography study of strained-layer III--V growth processes. This system will enable unambiguous determination of dislocation nucleation and multiplication processes as a function of controlled variations in growth conditions, and also during post-growth thermal processing. The planned experiments have placed very stringent demands upon the engineering design of the system, and design details regarding the growth chamber; sample manipulator, x-ray optics, and real-time imaging systems are described. Results obtained during a feasibility study are also presented.

Evolution of Wholesale Electricity Market Design with Increasing Levels of Renewable Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ela, E.; Milligan, M.; Bloom, A.

2014-09-01

Variable generation such as wind and photovoltaic solar power has increased substantially in recent years. Variable generation has unique characteristics compared to the traditional technologies that supply energy in the wholesale electricity markets. These characteristics create unique challenges in planning and operating the power system, and they can also influence the performance and outcomes from electricity markets. This report focuses on two particular issues related to market design: revenue sufficiency for long-term reliability and incentivizing flexibility in short-term operations. The report provides an overview of current design and some designs that have been proposed by industry or researchers.

Utilising three-dimensional printing techniques when providing unique assistive devices: A case report.

PubMed

Day, Sarah Jane; Riley, Shaun Patrick

2018-02-01

The evolution of three-dimensional printing into prosthetics has opened conversations about the availability and cost of prostheses. This report will discuss how a prosthetic team incorporated additive manufacture techniques into the treatment of a patient with a partial hand amputation to create and test a unique assistive device which he could use to hold his French horn. Case description and methods: Using a process of shape capture, photogrammetry, computer-aided design and finite element analysis, a suitable assistive device was designed and tested. The design was fabricated using three-dimensional printing. Patient satisfaction was measured using a Pugh's Matrix™, and a cost comparison was made between the process used and traditional manufacturing. Findings and outcomes: Patient satisfaction was high. The three-dimensional printed devices were 56% cheaper to fabricate than a similar laminated device. Computer-aided design and three-dimensional printing proved to be an effective method for designing, testing and fabricating a unique assistive device. Clinical relevance CAD and 3D printing techniques can enable devices to be designed, tested and fabricated cheaper than when using traditional techniques. This may lead to improvements in quality and accessibility.

Linear Proof Mass Actuator

NASA Technical Reports Server (NTRS)

Holloway, Sidney E., III

1994-01-01

This paper describes the mechanical design, analysis, fabrication, testing, and lessons learned by developing a uniquely designed spaceflight-like actuator. The linear proof mass actuator (LPMA) was designed to attach to both a large space structure and a ground test model without modification. Previous designs lacked the power to perform in a terrestrial environment while other designs failed to produce the desired accelerations or frequency range for spaceflight applications. Thus, the design for a unique actuator was conceived and developed at NASA Langley Research Center. The basic design consists of four large mechanical parts (mass, upper housing, lower housing, and center support) and numerous smaller supporting components including an accelerometer, encoder, and four drive motors. Fabrication personnel were included early in the design phase of the LPMA as part of an integrated manufacturing process to alleviate potential difficulties in machining an already challenging design. Operating testing of the LPMA demonstrated that the actuator is capable of various types of load functions.

Linear Proof Mass Actuator

NASA Technical Reports Server (NTRS)

Holloway, S. E., III

1995-01-01

This paper describes the mechanical design, analysis, fabrication, testing, and lessons learned by developing a uniquely designed spaceflight-like actuator. The Linear Proof Mass Actuator (LPMA) was designed to attach to both a large space structure and a ground test model without modification. Previous designs lacked the power to perform in a terrestrial environment while other designs failed to produce the desired accelerations or frequency range for spaceflight applications. Thus, the design for a unique actuator was conceived and developed at NASA Langley Research Center. The basic design consists of four large mechanical parts (Mass, Upper Housing, Lower Housing, and Center Support) and numerous smaller supporting components including an accelerometer, encoder, and four drive motors. Fabrication personnel were included early in the design phase of the LPMA as part of an integrated manufacturing process to alleviate potential difficulties in machining an already challenging design. Operational testing of the LPMA demonstrated that the actuator is capable of various types of load functions.

Knowledge-Driven Design of Virtual Patient Simulations

ERIC Educational Resources Information Center

Vergara, Victor; Caudell, Thomas; Goldsmith, Timothy; Panaiotis; Alverson, Dale

2009-01-01

Virtual worlds provide unique opportunities for instructors to promote, study, and evaluate student learning and comprehension. In this article, Victor Vergara, Thomas Caudell, Timothy Goldsmith, Panaiotis, and Dale Alverson explore the advantages of using virtual reality environments to create simulations for medical students. Virtual simulations…

Scale and scaling in agronomy and environmental sciences

USDA-ARS?s Scientific Manuscript database

Scale is of paramount importance in environmental studies, engineering, and design. The unique course covers the following topics: scale and scaling, methods and theories, scaling in soils and other porous media, scaling in plants and crops; scaling in landscapes and watersheds, and scaling in agro...

The Effect of Educational Software, Video Modelling and Group Discussion on Social-Skill Acquisition Among Students with Mild Intellectual Disabilities.

PubMed

Hetzroni, Orit E; Banin, Irit

2017-07-01

People with intellectual and developmental disabilities (IDD) often demonstrate difficulties in social skills. The purpose of this study was to examine the effects of a comprehensive intervention program on the acquisition of social skills among students with mild IDD. Single subject multiple baseline design across situations was used for teaching five school-age children with mild IDD social skills embedded in school-based situations. Results demonstrate that the intervention program that included video modelling and games embedded with group discussions and simulations increased the level and use of adequate social behaviours within the school's natural environment. Results demonstrate the unique attribution of a comprehensive interactive program for acquisition and transfer of participants' social skills such as language pragmatics and social rules within the school environment. Group discussions and simulations were beneficial and enabled both group and personalized instruction through the unique application of the program designed for the study. © 2016 John Wiley & Sons Ltd.

Learning on-Location: Evaluating the Instructional Design for Just-in-Time Learning in Interdisciplinary Short-Term Study Abroad

ERIC Educational Resources Information Center

Coryell, J. E.

2013-01-01

In the current era of global society, adults need to cultivate cognitive and affective capabilities for interacting in a wide variety of work and living situations. Studying abroad can provide unique learning opportunities toward this end. Good intentions in offering study abroad experiences do not, however, always produce the kind of learning,…

Right-Handed Helical Foldamers Consisting of De Novo d -AApeptides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Teng, Peng; Ma, Ning; Cerrato, Darrell Cole

New types of foldamer scaffolds are formidably challenging to design and synthesize, yet highly desirable as structural mimics of peptides/proteins with a wide repertoire of functions. In particular, the development of peptidomimetic helical foldamers holds promise for new biomaterials, catalysts, and drug molecules. Unnatural l-sulfono-γ-AApeptides were recently developed and shown to have potential applications in both biomedical and material sciences. However, d-sulfono-γ-AApeptides, the enantiomers of l-sulfono-γ-AApeptides, have never been studied due to the lack of high-resolution three-dimensional structures to guide structure-based design. Herein, we report the first synthesis and X-ray crystal structures of a series of 2:1 l-amino acid/d-sulfono-γ-AApeptide hybridmore » foldamers, and elucidate their folded conformation at the atomic level. Single-crystal X-ray crystallography indicates that this class of oligomers folds into well-defined right-handed helices with unique helical parameters. The helical structures were consistent with data obtained from solution 2D NMR, CD studies, and molecular dynamics simulations. Our findings are expected to inspire the structure-based design of this type of unique folding biopolymers for biomaterials and biomedical applications.« less

The Science and Prospects of Astrophysical Observations with New Horizons

NASA Astrophysics Data System (ADS)

Nguyen, Chi; Zemcov, Michael; Cooray, Asantha; Lisse, Carey; Poppe, Andrew

2018-01-01

Astrophysical observation from the outer solar system provides a unique and quiet vantage point from which to understand our cosmos. If properly designed, such observations enable several niche science cases that are difficult or impossible to perform near Earth. NASA's New Horizons mission includes several instruments with ~10cm telescopes that provide imaging capability from UV to near-IR wavelengths with moderate spectral resolution. A carefully designed survey can optimize the expendable propellant and limited data telemetry bandwidth to allow several unique measurements, including a detailed understanding of the cosmic extragalactic background light in the optical and near-IR, studies of the local and extragalactic UV background, measurements of the properties of dust and ice in the outer solar system, searches for moons and other faint structures around exoplanets, and determinations of the mass of planets far from their parent stars using gravitational microlensing. New Horizons is currently in an extended mission, that will conclude in 2021, designed to survey distant objects in the Kuiper Belt at high phase angles and perform a close flyby of KBO 2014 MU69. Afterwards, the astrophysics community will have a unique, generational opportunity to use this mission for astronomical observations at heliocentric distances beyond 50 AU. In this poster, we present the science case for an extended 2021 - 2026 astrophysics mission, and discuss some of the practical considerations that must be addressed to maximize the potential science return.

Thermal and cryogenic design study for space infrared telescope facility (SIRTF)

NASA Technical Reports Server (NTRS)

Urbach, A. R.; Kelly, T.; Poley, R.

1984-01-01

A study was conducted to determine the ability of an all superfluid helium design to meet the performance requirements of background limited to 200 micrometer, and a two year lifetime for a one meter class free flying infrared observatory. Both a 98 deg and 28.5 deg inclination orbits were examined, and aperture shade designs were developed for both orbits. A unique forebaffle cooling design significantly reduces the sensitivity to aperture heat loads. With certain restrictions on observing modes, the study determined that an all superfluid helium Dewar will meet the temperature and lifetime requirements. A dual cryogen SFHe/SH2 system was also investigated for the 28.5 deg orbit and found to provide a more constant forebaffle temperature but with only a slight improvement in lifetime.

Recent developments in BWR fuel design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Congdon, S.P.; Noble, L.D.; Wood, J.E.

1991-11-01

Substantial increases in the cost effectiveness and performance capability of boiling water reactor (BWR) fuel designs have been implemented in the past 5 to 7 yr. This increase has been driven by (a) utility desires to lower fuel and operating costs and (b) design innovations that have lowered enrichment requirements, improved thermal-hydraulic performance, and increased discharge exposure. Higher discharge exposures reduce disposal costs for European and Asian utilities and enable US utilities to lengthen operating cycles. A typical BWR reload fuel bundle fabricated today has 25% higher {sup 235}U enrichment and a factor of 2 higher gadolinium loading than onemore » made several years ago. Today's BWR fuel bundles also contain more unheated water reduces the axial water density variation, lowers the void coefficient, and enhances the neutron efficiency of the bundle, reducing both the gadolinium poison and the enrichment requirements. In addition to these general trends, the following unique design innovations have further enhanced the fuel cost efficiency and performance characteristics of BWR fuel: ferrule spacer, part length rods, interactive channel, and bundle enhanced spectral shift. GE's fuel designs offer the flexibility for modern BWR fuel requirements and contain unique design features that enhance flexibility for modern BWR fuel requirements and contain unique design features that enhance flexibility and fuel cycle economics.« less

NanoSat Constellation Mission Design

NASA Technical Reports Server (NTRS)

Concha, Marco; DeFazio, Robert

1998-01-01

The NanoSat constellation concept mission proposes simultaneous operation of multiple swarms of as many as 22 identical 10 kg spacecraft per swarm. The various orbits in a NanoSat swarm vary from 3x12 to 3x42 R(sub e) in geometry. In this report the unique flight dynamics issues of this constellation satellite mission design are addressed. Studies include orbit design, orbit determination, and error analysis. A preliminary survey determined the orbital parameters that would limit the maximum shadow condition while providing adequate ground station access for three ground stations.

Optical design and development of near-range compact lidar

NASA Astrophysics Data System (ADS)

Shiina, Tatsuo

2011-12-01

There are large demands to monitor the atmosphere in the closed space (hall, factory and so on), to check vegetation remotely and to detect hazardous gases such as explosive gas and bio terror from explosion-proof distance. On the contrary, traditional lidars have blind area, it is hard to monitor the atmosphere and the gas in the near range. In this study, optical designs and concrete developments for the atmosphere monitoring and the certain gas detection in near range were accomplished. Unique optical designs are introduced and their practical setups are explained.

Evolutionary algorithm for optimization of nonimaging Fresnel lens geometry.

PubMed

Yamada, N; Nishikawa, T

2010-06-21

In this study, an evolutionary algorithm (EA), which consists of genetic and immune algorithms, is introduced to design the optical geometry of a nonimaging Fresnel lens; this lens generates the uniform flux concentration required for a photovoltaic cell. Herein, a design procedure that incorporates a ray-tracing technique in the EA is described, and the validity of the design is demonstrated. The results show that the EA automatically generated a unique geometry of the Fresnel lens; the use of this geometry resulted in better uniform flux concentration with high optical efficiency.

VESUVIO: a novel instrument for performing spectroscopic studies in condensed matter with eV neutrons at the ISIS facility

NASA Astrophysics Data System (ADS)

Senesi, R.; Andreani, C.; Bowden, Z.; Colognesi, D.; Degiorgi, E.; Fielding, A. L.; Mayers, J.; Nardone, M.; Norris, J.; Praitano, M.; Rhodes, N. J.; Stirling, W. G.; Tomkinson, J.; Uden, C.

2000-03-01

The VESUVIO project aims to provide unique prototype instrumentation at the ISIS-pulsed neutron source and to establish a routine experimental and theoretical program in neutron scattering spectroscopy at eV energies. This instrumentation will be specifically designed for high momentum, (20 Å-11 eV) inelastic neutron scattering studies of microscopic dynamical processes in materials and will represent a unique facility for EU researchers. It will allow to derive single-particle kinetic energies and single-particle momentum distributions, n(p), providing additional and/or complementary information to other neutron inelastic spectroscopic techniques.

Proceedings of the Seventh Annual Summer Conference. NASA/USRA: University Advanced Design Program

NASA Technical Reports Server (NTRS)

1991-01-01

The Advanced Design Program (ADP) is a unique program that brings together students and faculty from U.S. engineering schools with engineers from the NASA centers through integration of current and future NASA space and aeronautics projects into university engineering design curriculum. The Advanced Space Design Program study topics cover a broad range of projects that could be undertaken during a 20-30 year period beginning with the deployment of the Space Station Freedom. The Advanced Aeronautics Design Program study topics typically focus on nearer-term projects of interest to NASA, covering from small, slow-speed vehicles through large, supersonic passenger transports and on through hypersonic research vehicles. Student work accomplished during the 1990-91 academic year and reported at the 7th Annual Summer Conference is presented.

African American Female Faculty in Predominantly White Graduate Schools of Social Work

ERIC Educational Resources Information Center

Edwards, Janice Berry; Clark, Trenette T.; Bryant, Shirley

2012-01-01

This study of African American female faculty in predominantly White schools of social work was designed to examine the unique experience of these faculties. The examination also aimed to develop a better understanding of the challenges and the experiences of these faculty members. This exploratory study sampled African American female social work…

The Creation and Implementation of a Dream: Lessons Learned from a Unique Case Study

ERIC Educational Resources Information Center

Wheat, Kevin

2017-01-01

Many educational leaders dream of the opportunity to begin a new school. New schools provide opportunities for innovation, change, and creativity, which most educators believe is needed to improve current middle school practice. This study follows the process of planning for and opening a new and innovative middle school program designed to offer…

System Learning in an Urban School District: A Case Study of Intra-District Learning

ERIC Educational Resources Information Center

Redding, Christopher; Cannata, Marisa; Miller, Jason

2017-01-01

This paper presents evidence from a unique reform model that allowed teachers and other educators in a large urban district to collaborate with one another in the development of an innovation meant to improve student ownership and responsibility. In this longitudinal case study, we describe school stakeholders' learning about the design, the…

Patterns of Teacher's Instructional Moves: What Makes Mathematical Instructional Practices Unique?

ERIC Educational Resources Information Center

Pinter, Holly Henderson

2013-01-01

The purpose of this study was to examine patterns in fourth-grade teachers' use of instructional moves in the implementation of standards-based mathematical teaching practices. Using a mixed methods sequential explanatory design, the study consisted of two phases: quantitative selection and qualitative analysis. The first phase of the study…

System Learning in an Urban School District: A Case Study of Intra-District Learning

ERIC Educational Resources Information Center

Redding, Christopher; Cannata, Marisa; Miller, Jason M.

2018-01-01

This paper presents evidence from a unique reform model that allowed teachers and other educators in a large urban district to collaborate with one another in the development of an innovation meant to improve student ownership and responsibility. In this longitudinal case study, we describe school stakeholders' learning about the design, the…

Performing skin microbiome research: A method to the madness

PubMed Central

Kong, Heidi H.; Andersson, Björn; Clavel, Thomas; Common, John E.; Jackson, Scott A.; Olson, Nathan D.; Segre, Julia A.; Traidl-Hoffmann, Claudia

2017-01-01

Growing interest in microbial contributions to human health and disease has increasingly led investigators to examine the microbiome in both healthy skin and cutaneous disorders, including acne, psoriasis and atopic dermatitis. The need for common language, effective study design, and validated methods are critical for high-quality, standardized research. Features, unique to skin, pose particular challenges when conducting microbiome research. This review discusses microbiome research standards and highlights important factors to consider, including clinical study design, skin sampling, sample processing, DNA sequencing, control inclusion, and data analysis. PMID:28063650

UK Health and Social Care Case Studies: Iterative Technology Development.

PubMed

Blanchard, Adie; Gilbert, Laura; Dawson, Tom

2017-01-01

As a result of increasing demand in the face of reducing resources, technology has been implemented in many social and health care services to improve service efficiency. This paper outlines the experiences of deploying a 'Software as a Service' application in the UK social and health care sectors. The case studies demonstrate that every implementation is different, and unique to each organisation. Technology design and integration can be facilitated by ongoing engagement and collaboration with all stakeholders, flexible design, and attention to interoperability to suit services and their workflows.

Computer program to perform cost and weight analysis of transport aircraft. Volume 2: Technical volume

NASA Technical Reports Server (NTRS)

1973-01-01

An improved method for estimating aircraft weight and cost using a unique and fundamental approach was developed. The results of this study were integrated into a comprehensive digital computer program, which is intended for use at the preliminary design stage of aircraft development. The program provides a means of computing absolute values for weight and cost, and enables the user to perform trade studies with a sensitivity to detail design and overall structural arrangement. Both batch and interactive graphics modes of program operation are available.

Exploring Parental Involvement Strategies Utilized by Middle School Interdisciplinary Teams

ERIC Educational Resources Information Center

Robbins, Chris; Searby, Linda

2013-01-01

Adolescents present a unique collection of characteristics and challenges which middle school interdisciplinary teams were designed to address. This article describes a research study which explored parental involvement strategies employed by interdisciplinary teaching teams from three very different middle schools: an affluent suburban school, a…

Methodological Rigor in Preclinical Cardiovascular Studies

PubMed Central

Ramirez, F. Daniel; Motazedian, Pouya; Jung, Richard G.; Di Santo, Pietro; MacDonald, Zachary D.; Moreland, Robert; Simard, Trevor; Clancy, Aisling A.; Russo, Juan J.; Welch, Vivian A.; Wells, George A.

2017-01-01

Rationale: Methodological sources of bias and suboptimal reporting contribute to irreproducibility in preclinical science and may negatively affect research translation. Randomization, blinding, sample size estimation, and considering sex as a biological variable are deemed crucial study design elements to maximize the quality and predictive value of preclinical experiments. Objective: To examine the prevalence and temporal patterns of recommended study design element implementation in preclinical cardiovascular research. Methods and Results: All articles published over a 10-year period in 5 leading cardiovascular journals were reviewed. Reports of in vivo experiments in nonhuman mammals describing pathophysiology, genetics, or therapeutic interventions relevant to specific cardiovascular disorders were identified. Data on study design and animal model use were collected. Citations at 60 months were additionally examined as a surrogate measure of research impact in a prespecified subset of studies, stratified by individual and cumulative study design elements. Of 28 636 articles screened, 3396 met inclusion criteria. Randomization was reported in 21.8%, blinding in 32.7%, and sample size estimation in 2.3%. Temporal and disease-specific analyses show that the implementation of these study design elements has overall not appreciably increased over the past decade, except in preclinical stroke research, which has uniquely demonstrated significant improvements in methodological rigor. In a subset of 1681 preclinical studies, randomization, blinding, sample size estimation, and inclusion of both sexes were not associated with increased citations at 60 months. Conclusions: Methodological shortcomings are prevalent in preclinical cardiovascular research, have not substantially improved over the past 10 years, and may be overlooked when basing subsequent studies. Resultant risks of bias and threats to study validity have the potential to hinder progress in cardiovascular medicine as preclinical research often precedes and informs clinical trials. Stroke research quality has uniquely improved in recent years, warranting a closer examination for interventions to model in other cardiovascular fields. PMID:28373349

Methodological Rigor in Preclinical Cardiovascular Studies: Targets to Enhance Reproducibility and Promote Research Translation.

PubMed

Ramirez, F Daniel; Motazedian, Pouya; Jung, Richard G; Di Santo, Pietro; MacDonald, Zachary D; Moreland, Robert; Simard, Trevor; Clancy, Aisling A; Russo, Juan J; Welch, Vivian A; Wells, George A; Hibbert, Benjamin

2017-06-09

Methodological sources of bias and suboptimal reporting contribute to irreproducibility in preclinical science and may negatively affect research translation. Randomization, blinding, sample size estimation, and considering sex as a biological variable are deemed crucial study design elements to maximize the quality and predictive value of preclinical experiments. To examine the prevalence and temporal patterns of recommended study design element implementation in preclinical cardiovascular research. All articles published over a 10-year period in 5 leading cardiovascular journals were reviewed. Reports of in vivo experiments in nonhuman mammals describing pathophysiology, genetics, or therapeutic interventions relevant to specific cardiovascular disorders were identified. Data on study design and animal model use were collected. Citations at 60 months were additionally examined as a surrogate measure of research impact in a prespecified subset of studies, stratified by individual and cumulative study design elements. Of 28 636 articles screened, 3396 met inclusion criteria. Randomization was reported in 21.8%, blinding in 32.7%, and sample size estimation in 2.3%. Temporal and disease-specific analyses show that the implementation of these study design elements has overall not appreciably increased over the past decade, except in preclinical stroke research, which has uniquely demonstrated significant improvements in methodological rigor. In a subset of 1681 preclinical studies, randomization, blinding, sample size estimation, and inclusion of both sexes were not associated with increased citations at 60 months. Methodological shortcomings are prevalent in preclinical cardiovascular research, have not substantially improved over the past 10 years, and may be overlooked when basing subsequent studies. Resultant risks of bias and threats to study validity have the potential to hinder progress in cardiovascular medicine as preclinical research often precedes and informs clinical trials. Stroke research quality has uniquely improved in recent years, warranting a closer examination for interventions to model in other cardiovascular fields. © 2017 The Authors.

Low-cost, high-resolution, single-structure array telescopes for imaging of low-earth-orbit satellites

NASA Technical Reports Server (NTRS)

Massie, N. A.; Oster, Yale; Poe, Greg; Seppala, Lynn; Shao, Mike

1992-01-01

Telescopes that are designed for the unconventional imaging of near-earth satellites must follow unique design rules. The costs must be reduced substantially over those of the conventional telescope designs, and the design must accommodate a technique to circumvent atmospheric distortion of the image. Apertures of 12 m and more along with altitude-altitude mounts that provide high tracking rates are required. A novel design for such a telescope, optimized for speckle imaging, has been generated. Its mount closely resembles a radar mount, and it does not use the conventional dome. Costs for this design are projected to be considerably lower than those for the conventional designs. Results of a design study are presented with details of the electro-optical and optical designs.

Miniaturized Ion Mobility Spectrometer

NASA Technical Reports Server (NTRS)

Stimac, Robert M. (Inventor); Kaye, William J (Inventor)

2017-01-01

By utilizing the combination of a unique electronic ion injection control circuit in conjunction with a particularly designed drift cell construction, the instantly disclosed ion mobility spectrometer (IMS) achieves increased levels of sensitivity, while achieving significant reductions in size and weight. The instant IMS is of a much simpler and easy to manufacture design, rugged and hermetically sealed, capable of operation at high temperatures to at least 250 degrees Centigrade, and is uniquely sensitive, particularly to explosive chemicals.

Miniaturized Ion Mobility Spectrometer

NASA Technical Reports Server (NTRS)

Kaye, William J. (Inventor); Stimac, Robert M. (Inventor)

2015-01-01

By utilizing the combination of a unique electronic ion injection control circuit in conjunction with a particularly designed drift cell construction, the instantly disclosed ion mobility spectrometer achieves increased levels of sensitivity, while achieving significant reductions in size and weight. The instant IMS is of a much simpler and easy to manufacture design, rugged and hermetically sealed, capable of operation at high temperatures to at least 250.degree. C., and is uniquely sensitive, particularly to explosive chemicals.

DRAGON - 8U Nanosatellite Orbital Deployer

NASA Technical Reports Server (NTRS)

Dobrowolski, Marcin; Grygorczuk, Jerzy; Kedziora, Bartosz; Tokarz, Marta; Borys, Maciej

2014-01-01

The Space Research Centre of the Polish Academy of Sciences (SRC PAS) together with Astronika company have developed an Orbital Deployer called DRAGON for ejection of the Polish scientific nanosatellite BRITE-PL Heweliusz (Fig. 1). The device has three unique mechanisms including an adopted and scaled lock and release mechanism from the ESA Rosetta mission MUPUS instrument. This paper discusses major design restrictions of the deployer, unique design features, and lessons learned from development through testing.

The 4A Metric Algorithm: A Unique E-Learning Engineering Solution Designed via Neuroscience to Counter Cheating and Reduce Its Recidivism by Measuring Student Growth through Systemic Sequential Online Learning

ERIC Educational Resources Information Center

Osler, James Edward

2016-01-01

This paper provides a novel instructional methodology that is a unique E-Learning engineered "4A Metric Algorithm" designed to conceptually address the four main challenges faced by 21st century students, who are tempted to cheat in a myriad of higher education settings (face to face, hybrid, and online). The algorithmic online…

Inverse design of an isotropic suspended Kirchhoff rod: theoretical and numerical results on the uniqueness of the natural shape.

PubMed

Bertails-Descoubes, Florence; Derouet-Jourdan, Alexandre; Romero, Victor; Lazarus, Arnaud

2018-04-01

Solving the equations for Kirchhoff elastic rods has been widely explored for decades in mathematics, physics and computer science, with significant applications in the modelling of thin flexible structures such as DNA, hair or climbing plants. As demonstrated in previous experimental and theoretical studies, the natural curvature plays an important role in the equilibrium shape of a Kirchhoff rod, even in the simple case where the rod is isotropic and suspended under gravity. In this paper, we investigate the reverse problem: can we characterize the natural curvature of a suspended isotropic rod, given an equilibrium curve? We prove that although there exists an infinite number of natural curvatures that are compatible with the prescribed equilibrium, they are all equivalent in the sense that they correspond to a unique natural shape for the rod. This natural shape can be computed efficiently by solving in sequence three linear initial value problems, starting from any framing of the input curve. We provide several numerical experiments to illustrate this uniqueness result, and finally discuss its potential impact on non-invasive parameter estimation and inverse design of thin elastic rods.

Inverse design of an isotropic suspended Kirchhoff rod: theoretical and numerical results on the uniqueness of the natural shape

NASA Astrophysics Data System (ADS)

Bertails-Descoubes, Florence; Derouet-Jourdan, Alexandre; Romero, Victor; Lazarus, Arnaud

2018-04-01

Solving the equations for Kirchhoff elastic rods has been widely explored for decades in mathematics, physics and computer science, with significant applications in the modelling of thin flexible structures such as DNA, hair or climbing plants. As demonstrated in previous experimental and theoretical studies, the natural curvature plays an important role in the equilibrium shape of a Kirchhoff rod, even in the simple case where the rod is isotropic and suspended under gravity. In this paper, we investigate the reverse problem: can we characterize the natural curvature of a suspended isotropic rod, given an equilibrium curve? We prove that although there exists an infinite number of natural curvatures that are compatible with the prescribed equilibrium, they are all equivalent in the sense that they correspond to a unique natural shape for the rod. This natural shape can be computed efficiently by solving in sequence three linear initial value problems, starting from any framing of the input curve. We provide several numerical experiments to illustrate this uniqueness result, and finally discuss its potential impact on non-invasive parameter estimation and inverse design of thin elastic rods.

Design, construction and operation features of high-rise structures

NASA Astrophysics Data System (ADS)

Mylnik, Alexey; Mylnik, Vladimir; Zubeeva, Elena; Mukhamedzhanova, Olga

2018-03-01

The article considers design, construction and operation features of high-rise facilities. The analysis of various situations, that come from improper designing, construction and operation of unique facilities, is carried out. The integrated approach is suggested, when the problems of choosing acceptable constructional solutions related to the functional purpose, architectural solutions, methods of manufacturing and installation, operating conditions for unique buildings and structures are being tackled. A number of main causes for the emergency destruction of objects under construction and operation is considered. A number of measures are proposed on the basis of factor classification in order to efficiently prevent the situations, when various negative options of design loads and emergency impacts occur.

Social Studies in the Middle School: A Report of the Task Force on Social Studies in the Middle School. Position Statement & Guidelines.

ERIC Educational Resources Information Center

National Council for the Social Studies, Washington, DC.

This task force report is designed to focus attention on the young adolescent learner and provide direction for developing appropriate and meaningful social studies instruction for the middle school. Schools at the middle level characteristically focus on the unique developmental needs of young adolescents. A number of these needs are listed, in…

Fast Lithium-Ion Transportation in Crystalline Polymer Electrolytes.

PubMed

Fu, Xiao-Bin; Yang, Guang; Wu, Jin-Ze; Wang, Jia-Chen; Chen, Qun; Yao, Ye-Feng

2018-01-05

Fast lithium-ion transportation is found in the crystalline polymer electrolytes, α-CD-PEO n /Li + (n=12, 40), prepared by self-assembly of α-cyclodextrin (CD), polyethylene oxide (PEO) and Li + salts. A detailed solid-state NMR study combined with the X-ray diffraction technique reveals the unique structural features of the samples, that is, a) the tunnel structure formed by the assembled CDs, providing the ordered long-range pathway for Li + ion transportation; b) the all-trans conformational sequence of the PEO chains in the tunnels, attenuating significantly the coordination between Li + and the EO segments. The origin of the fast lithium-ion transportation has been attributed to these unique structural features. This work demonstrates the first example in solid polymer electrolytes (SPEs) for "creating" fast ion transportation through material design and will find potential applications in the design of new ionconducting SPE materials. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Ultralow-mass solar-array designs for Halley's comet rendezvous mission

NASA Technical Reports Server (NTRS)

Costogue, E. N.; Rayl, G.

1978-01-01

This paper describes the conceptual design study results of photovoltaic arrays capable of powering a Halley's comet rendezvous mission. This mission would be Shuttle-launched, employ a unique form of propulsion (ion drive) which requires high power levels for operation, and operate at distances between 0.6 and 4.5 AU. These requirements make it necessary to develop arrays with extremely high power-to-mass ratio (200 W/kg). In addition, the dual requirements of providing ion thruster power as well as housekeeping power leads to the development of unique methods for mode switching. Both planar and variable-concentrator-enhanced array concepts using ultrathin (50 micron) high-efficiency (up to 12.5%) silicon solar cells coupled with thin (75 micron) plastic encapsulants are considered. In order to satisfy the Shuttle launch environment it was necessary to provide novel methods of both storing and deploying these arrays.

Sustainable design guidelines to support the Washington State ferries terminal design manual : stormwater and material issues.

DOT National Transportation Integrated Search

2011-08-01

In an effort to assist the developers of the terminal design manual in potentially addressing : sustainable design issues, the overall goal is to produce Sustainable Design Guidelines that : will specifically address the unique needs and requirements...

Solar Sail Spaceflight Simulation

NASA Technical Reports Server (NTRS)

Lisano, Michael; Evans, James; Ellis, Jordan; Schimmels, John; Roberts, Timothy; Rios-Reyes, Leonel; Scheeres, Daniel; Bladt, Jeff; Lawrence, Dale; Piggott, Scott

2007-01-01

The Solar Sail Spaceflight Simulation Software (S5) toolkit provides solar-sail designers with an integrated environment for designing optimal solar-sail trajectories, and then studying the attitude dynamics/control, navigation, and trajectory control/correction of sails during realistic mission simulations. Unique features include a high-fidelity solar radiation pressure model suitable for arbitrarily-shaped solar sails, a solar-sail trajectory optimizer, capability to develop solar-sail navigation filter simulations, solar-sail attitude control models, and solar-sail high-fidelity force models.

Mentoring Prospective Principals: Determinants of Productive Mentor-Mentee Relationship

ERIC Educational Resources Information Center

Schechter, Chen

2014-01-01

Mentoring contributes to prospective principals' growth, easing their transition from the role of teacher to that of administrator. This article reports findings from a study aimed at examining the determinant factors affecting the mentor-mentee relationship in a uniquely designed principal preparation program in New York City. The study…

Organizational Systems Questionnaire (OSQ) Validity Study

ERIC Educational Resources Information Center

Billings, James C.; Kimball, Thomas G.; Shumway, Sterling T.; Korinek, Alan W.

2007-01-01

Marriage and family therapists (MFTs), who are trained in systems theory and consult with complex and difficult systems (e.g., couples and families), are uniquely suited to both assess and intervene in broader organizational systems. However, MFTs are in need of more systemically designed assessment tools to guide and inform their interventions…

Patterns of Change: Forces and Motion

ERIC Educational Resources Information Center

Phillips, Marianne; Jeffery, Tonya D.

2016-01-01

Patterns of Change: Forces and Motion is an integrated science lesson that uses the 5E lesson cycle to tie together science with language arts, mathematics, literature, technology, engineering and social studies in an engaging format applicable for young learners. This lesson has been uniquely designed for the purpose of providing elementary…

Writing Motivation of Students with Specific Language Impairments

ERIC Educational Resources Information Center

Brouwer, Kyle Lee

2010-01-01

This study was designed to compare the writing motivation of students with specific language impairments with their non-disabled peers. Due to the cognitive and linguistic demands of the writing process, students with language impairments face unique difficulties during the writing process. It was hypothesized that students with specific language…

First Year Experience for At-Risk College Students

ERIC Educational Resources Information Center

Connolly, Sara; Flynn, Ellen E.; Jemmott, Jill; Oestreicher, Edina

2017-01-01

In this study, we explored whether a uniquely designed First Year Experience (FYE) class for newly admitted at-risk college students would increase academic success; help students avoid academic probation; and increase retention for the following semester. Participants included 40 students (75% African Americans, 20% Hispanic Americans, and 5%…

Siblings within Families: Levels of Analysis and Patterns of Influence

ERIC Educational Resources Information Center

Jenkins, Jennifer; Dunn, Judy

2009-01-01

The study of siblings has become increasingly central to developmental science. Sibling relationships have unique effects on development, and sibling designs allow researchers to isolate causal mechanisms in development. This volume emphasizes causal mechanisms in the social domain. We review the preceding chapters in relation to six topics: a…

76 FR 20953 - Application(s) for Duty-Free Entry of Scientific Instruments

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

...., 9700 South Cass Ave., Lemont, IL 60439. Instrument: Mythen 1K Detector System. Manufacturer: Dectris... (RIXS) to study the electronic structure of highly correlated systems. This instrument is unique in that... dynamic range; and a small, lightweight and compact design. Justification for Duty-Free Entry: There are...

Maternal Attachment Behaviors with Adopted and Birth Infants.

ERIC Educational Resources Information Center

Chan, Marilyn M.

This study investigated: (1) effects of teaching mothers the unique behavioral cues of their adopted infants and (2) potential differences between the mothering practices of adoptive and birth mothers. A pretest, posttest experimental prospective design was used with random assignment of mother-infant dyads. Mother-adopted infant dyads were…

STS ancillary equipment study. [user reference book for multimission modular spacecraft missions

NASA Technical Reports Server (NTRS)

Plough, J. A.

1977-01-01

Spaceborne and ground ancillary equipment for multimission module spacecraft are listed to provide documentation for potential users interested in utilizing existing equipment rather than developing payload unique designs. The format of the data form contained in the Ancillary Equipment user reference book is discussed.

Design Analysis of a High Temperature Radiator for the Variable Specific Impulse Magnetoplasma Rocket (VASIMR)

NASA Technical Reports Server (NTRS)

Sheth, Rubik B.; Ungar, Eugene K.; Chambliss, Joe P.; Cassady, Leonard D.

2011-01-01

The Variable Specific Impulse Magnetoplasma Rocket (VASIMR), currently under development by Ad Astra Rocket Company, is a unique propulsion system that can potentially change the way space propulsion is performed. VASIMR's efficiency, when compared to that of a conventional chemical rocket, reduce propellant needed for exploration missions by a factor of 10. Currently plans include flight tests of a 200 kW VASIMR system, titled VF-200, on the International Space Station. The VF-200 will consist of two 100 kW thruster units packaged together in one engine bus. Each thruster unit has a unique heat rejection requirement of about 27 kW over a firing time of 15 minutes. In order to control rocket core temperatures, peak operating temperatures of about 300 C are expected within the thermal control loop. Design of a high temperature radiator is a unique challenge for the vehicle design. This paper will discuss the path taken to develop a steady state and transient based radiator design. The paper will describe radiator design options for the VASIMR thermal control system for use on ISS as well as future exploration vehicles.

Estimating avian population size using Bowden's estimator

USGS Publications Warehouse

Diefenbach, D.R.

2009-01-01

Avian researchers often uniquely mark birds, and multiple estimators could be used to estimate population size using individually identified birds. However, most estimators of population size require that all sightings of marked birds be uniquely identified, and many assume homogeneous detection probabilities. Bowden's estimator can incorporate sightings of marked birds that are not uniquely identified and relax assumptions required of other estimators. I used computer simulation to evaluate the performance of Bowden's estimator for situations likely to be encountered in bird studies. When the assumptions of the estimator were met, abundance and variance estimates and confidence-interval coverage were accurate. However, precision was poor for small population sizes (N < 50) unless a large percentage of the population was marked (>75%) and multiple (≥8) sighting surveys were conducted. If additional birds are marked after sighting surveys begin, it is important to initially mark a large proportion of the population (pm ≥ 0.5 if N ≤ 100 or pm > 0.1 if N ≥ 250) and minimize sightings in which birds are not uniquely identified; otherwise, most population estimates will be overestimated by >10%. Bowden's estimator can be useful for avian studies because birds can be resighted multiple times during a single survey, not all sightings of marked birds have to uniquely identify individuals, detection probabilities among birds can vary, and the complete study area does not have to be surveyed. I provide computer code for use with pilot data to design mark-resight surveys to meet desired precision for abundance estimates.

Design, characterization and control of the Unique Mobility Corporation robot

NASA Technical Reports Server (NTRS)

Velasco, Virgilio B., Jr.; Newman, Wyatt S.; Steinetz, Bruce; Kopf, Carlo; Malik, John

1994-01-01

Space and mass are at a premium on any space mission, and thus any machinery designed for space use should be lightweight and compact, without sacrificing strength. It is for this reason that NASA/LeRC contracted Unique Mobility Corporation to exploit their novel actuator designs to build a robot that would advance the present state of technology with respect to these requirements. Custom-designed motors are the key feature of this robot. They are compact, high-performance dc brushless servo motors with a high pole count and low inductance, thus permitting high torque generation and rapid phase commutation. Using a custom-designed digital signal processor-based controller board, the pulse width modulation power amplifiers regulate the fast dynamics of the motor currents. In addition, the programmable digital signal processor (DSP) controller permits implementation of nonlinear compensation algorithms to account for motoring vs. regeneration, torque ripple, and back-EMF. As a result, the motors produce a high torque relative to their size and weight, and can do so with good torque regulation and acceptably high velocity saturation limits. This paper presents the Unique Mobility Corporation robot prototype: its actuators, its kinematic design, its control system, and its experimental characterization. Performance results, including saturation torques, saturation velocities and tracking accuracy tests are included.

A unique dosing system for the production of OH under high vacuum for the study of environmental heterogeneous reactions

NASA Astrophysics Data System (ADS)

Brown, Matthew A.; Johánek, Viktor; Hemminger, John C.

2008-02-01

A unique dosing system for the production of hydroxyl radicals under high vacuum for the study of environmental heterogeneous reactions is described. Hydroxyl radicals are produced by the photodissociation of a hydrogen peroxide aqueous gas mixture with 254nm radiation according to the reaction H2O2+hν (254nm)→OH+OH. Under the conditions of the current design, 0.6% conversion of hydrogen peroxide is expected yielding a hydroxyl number density on the order of 1010molecules/cm3. The flux distribution of the dosing system is calculated using a Monte Carlo simulation method and compared with the experimentally determined results. The performance of this unique hydroxyl dosing system is demonstrated for the heterogeneous reaction with a solid surface of potassium iodide. Coupling of the hydroxyl radical dosing system to a quantitative surface analysis system should help provide molecular level insight into detailed reaction mechanisms.

Design and fabrication of a sleep apnea device using computer-aided design/additive manufacture technologies.

PubMed

Al Mortadi, Noor; Eggbeer, Dominic; Lewis, Jeffrey; Williams, Robert J

2013-04-01

The aim of this study was to analyze the latest innovations in additive manufacture techniques and uniquely apply them to dentistry, to build a sleep apnea device requiring rotating hinges. Laser scanning was used to capture the three-dimensional topography of an upper and lower dental cast. The data sets were imported into an appropriate computer-aided design software environment, which was used to design a sleep apnea device. This design was then exported as a stereolithography file and transferred for three-dimensional printing by an additive manufacture machine. The results not only revealed that the novel computer-based technique presented provides new design opportunities but also highlighted limitations that must be addressed before the techniques can become clinically viable.

Late Talkers: A Population-Based Study of Risk Factors and School Readiness Consequences

ERIC Educational Resources Information Center

Hammer, Carol Scheffner; Morgan, Paul; Farkas, George; Hillemeier, Marianne; Bitetti, Dana; Maczuga, Steve

2017-01-01

Purpose: This study was designed to (a) identify sociodemographic, pregnancy and birth, family health, and parenting and child care risk factors for being a late talker at 24 months of age; (b) determine whether late talkers continue to have low vocabulary at 48 months; and (c) investigate whether being a late talker plays a unique role in…

A Retrospective Study of a Scientist in the Classroom Partnership Program

ERIC Educational Resources Information Center

Ufnar, Jennifer A.; Bolger, Molly; Shepherd, Virginia L.

2017-01-01

The Scientist in the Classroom Partnership (SCP) is a unique, long-term program that partners STEM fellows with K-12 teachers. The SCP was adapted from the original NSF GK-12 model, with fellows and teachers working in the summer and academic year to build their partnership and design and coteach inquiry-based STEM curricula. The current study is…

A Study of an Inter-Institutional Partnership between an Urban Community College and an Urban Public School District

ERIC Educational Resources Information Center

Gaines, Michael L.

2012-01-01

This study examined the unique partnership between Midwest Community College and Urban Public Schools' Urban Career Technical High School. The Urban Technical High School (UTHS) is designed to provide students interested in Tech Prep education a clear pathway from high school to college. Through collaboration, services were provided to assist high…

Performance optimization of an online retailer by a unique online resilience engineering algorithm

NASA Astrophysics Data System (ADS)

Azadeh, A.; Salehi, V.; Salehi, R.; Hassani, S. M.

2018-03-01

Online shopping has become more attractive and competitive in electronic markets. Resilience engineering (RE) can help such systems divert to the normal state in case of encountering unexpected events. This study presents a unique online resilience engineering (ORE) approach for online shopping systems and customer service performance. Moreover, this study presents a new ORE algorithm for the performance optimisation of an actual online shopping system. The data are collected by standard questionnaires from both expert employees and customers. The problem is then formulated mathematically using data envelopment analysis (DEA). The results show that the design process which is based on ORE is more efficient than the conventional design approach. Moreover, on-time delivery is the most important factor from the personnel's perspective. In addition, according to customers' view, trust, security and good quality assurance are the most effective factors during transactions. This is the first study that introduces ORE for electronic markets. Second, it investigates impact of RE on online shopping through DEA and statistical methods. Third, a practical approach is employed in this study and it may be used for similar online shops. Fourth, the results are verified and validated through complete sensitivity analysis.

Nanogel Carrier Design for Targeted Drug Delivery

PubMed Central

Eckmann, D. M.; Composto, R. J.; Tsourkas, A.; Muzykantov, V. R.

2014-01-01

Polymer-based nanogel formulations offer features attractive for drug delivery, including ease of synthesis, controllable swelling and viscoelasticity as well as drug loading and release characteristics, passive and active targeting, and the ability to formulate nanogel carriers that can respond to biological stimuli. These unique features and low toxicity make the nanogels a favorable option for vascular drug targeting. In this review, we address key chemical and biological aspects of nanogel drug carrier design. In particular, we highlight published studies of nanogel design, descriptions of nanogel functional characteristics and their behavior in biological models. These studies form a compendium of information that supports the scientific and clinical rationale for development of this carrier for targeted therapeutic interventions. PMID:25485112

Helium process cycle

DOEpatents

Ganni, Venkatarao

2008-08-12

A unique process cycle and apparatus design separates the consumer (cryogenic) load return flow from most of the recycle return flow of a refrigerator and/or liquefier process cycle. The refrigerator and/or liquefier process recycle return flow is recompressed by a multi-stage compressor set and the consumer load return flow is recompressed by an independent consumer load compressor set that maintains a desirable constant suction pressure using a consumer load bypass control valve and the consumer load return pressure control valve that controls the consumer load compressor's suction pressure. The discharge pressure of this consumer load compressor is thereby allowed to float at the intermediate pressure in between the first and second stage recycle compressor sets. Utilizing the unique gas management valve regulation, the unique process cycle and apparatus design in which the consumer load return flow is separate from the recycle return flow, the pressure ratios of each recycle compressor stage and all main pressures associated with the recycle return flow are allowed to vary naturally, thus providing a naturally regulated and balanced floating pressure process cycle that maintains optimal efficiency at design and off-design process cycle capacity and conditions automatically.

Helium process cycle

DOEpatents

Ganni, Venkatarao

2007-10-09

A unique process cycle and apparatus design separates the consumer (cryogenic) load return flow from most of the recycle return flow of a refrigerator and/or liquefier process cycle. The refrigerator and/or liquefier process recycle return flow is recompressed by a multi-stage compressor set and the consumer load return flow is recompressed by an independent consumer load compressor set that maintains a desirable constant suction pressure using a consumer load bypass control valve and the consumer load return pressure control valve that controls the consumer load compressor's suction pressure. The discharge pressure of this consumer load compressor is thereby allowed to float at the intermediate pressure in between the first and second stage recycle compressor sets. Utilizing the unique gas management valve regulation, the unique process cycle and apparatus design in which the consumer load return flow is separate from the recycle return flow, the pressure ratios of each recycle compressor stage and all main pressures associated with the recycle return flow are allowed to vary naturally, thus providing a naturally regulated and balanced floating pressure process cycle that maintains optimal efficiency at design and off-design process cycle capacity and conditions automatically.

77 FR 55482 - Public Workshop on Marine Technology and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... provide a unique opportunity for classification societies, industry groups, standards development... email at [email protected] . You may also contact Lieutenant Commander Ken Hettler, Office of Design and... provides a unique opportunity for classification societies, industry groups, standards development...

Effects of Buckling Knockdown Factor, Internal Pressure and Material on the Design of Stiffened Cylinders

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Hilburger, Mark W.; Chunchu, Prasad B.

2010-01-01

A design study was conducted to investigate the effect shell buckling knockdown factor (SBKF), internal pressure and aluminum alloy material selection on the structural weight of stiffened cylindrical shells. Two structural optimization codes were used for the design study to determine the optimum minimum-weight design for a series of design cases, and included an in-house developed genetic algorithm (GA) code and PANDA2. Each design case specified a unique set of geometry, material, knockdown factor combinations and loads. The resulting designs were examined and compared to determine the effects of SBKF, internal pressure and material selection on the acreage design weight and controlling failure mode. This design study shows that use of less conservative SBKF values, including internal pressure, and proper selection of material alloy can result in significant weight savings for stiffened cylinders. In particular, buckling-critical cylinders with integrally machined stiffener construction can benefit from the use of thicker plate material that enables taller stiffeners, even when the stiffness, strength and density properties of these materials appear to be inferior.

Whole-genome sequence, SNP chips and pedigree structure: building demographic profiles in domestic dog breeds to optimize genetic-trait mapping.

PubMed

Dreger, Dayna L; Rimbault, Maud; Davis, Brian W; Bhatnagar, Adrienne; Parker, Heidi G; Ostrander, Elaine A

2016-12-01

In the decade following publication of the draft genome sequence of the domestic dog, extraordinary advances with application to several fields have been credited to the canine genetic system. Taking advantage of closed breeding populations and the subsequent selection for aesthetic and behavioral characteristics, researchers have leveraged the dog as an effective natural model for the study of complex traits, such as disease susceptibility, behavior and morphology, generating unique contributions to human health and biology. When designing genetic studies using purebred dogs, it is essential to consider the unique demography of each population, including estimation of effective population size and timing of population bottlenecks. The analytical design approach for genome-wide association studies (GWAS) and analysis of whole-genome sequence (WGS) experiments are inextricable from demographic data. We have performed a comprehensive study of genomic homozygosity, using high-depth WGS data for 90 individuals, and Illumina HD SNP data from 800 individuals representing 80 breeds. These data were coupled with extensive pedigree data analyses for 11 breeds that, together, allowed us to compute breed structure, demography, and molecular measures of genome diversity. Our comparative analyses characterize the extent, formation and implication of breed-specific diversity as it relates to population structure. These data demonstrate the relationship between breed-specific genome dynamics and population architecture, and provide important considerations influencing the technological and cohort design of association and other genomic studies. © 2016. Published by The Company of Biologists Ltd.

Whole-genome sequence, SNP chips and pedigree structure: building demographic profiles in domestic dog breeds to optimize genetic-trait mapping

PubMed Central

Dreger, Dayna L.; Rimbault, Maud; Davis, Brian W.; Bhatnagar, Adrienne; Parker, Heidi G.

2016-01-01

ABSTRACT In the decade following publication of the draft genome sequence of the domestic dog, extraordinary advances with application to several fields have been credited to the canine genetic system. Taking advantage of closed breeding populations and the subsequent selection for aesthetic and behavioral characteristics, researchers have leveraged the dog as an effective natural model for the study of complex traits, such as disease susceptibility, behavior and morphology, generating unique contributions to human health and biology. When designing genetic studies using purebred dogs, it is essential to consider the unique demography of each population, including estimation of effective population size and timing of population bottlenecks. The analytical design approach for genome-wide association studies (GWAS) and analysis of whole-genome sequence (WGS) experiments are inextricable from demographic data. We have performed a comprehensive study of genomic homozygosity, using high-depth WGS data for 90 individuals, and Illumina HD SNP data from 800 individuals representing 80 breeds. These data were coupled with extensive pedigree data analyses for 11 breeds that, together, allowed us to compute breed structure, demography, and molecular measures of genome diversity. Our comparative analyses characterize the extent, formation and implication of breed-specific diversity as it relates to population structure. These data demonstrate the relationship between breed-specific genome dynamics and population architecture, and provide important considerations influencing the technological and cohort design of association and other genomic studies. PMID:27874836

DESTINY+ Trajectory Design to (3200) Phaethon

NASA Astrophysics Data System (ADS)

Sarli, Bruno Victorino; Horikawa, Makoto; Yam, Chit Hong; Kawakatsu, Yasuhiro; Yamamoto, Takayuki

2018-03-01

This work explores the target selection and trajectory design of the mission candidate for ISAS/JAXA's small science satellite series, DESTINY PLUS or DESTINY+. This mission combines unique aspects of the latest satellite technology and exploration of transition bodies to fill a technical and scientific gap in the Japanese space science program. The spacecraft is targeted to study the comet-asteroid transition body (3200) Phaethon through a combination of low-thrust propulsion and Earth Gravity Assist. The trajectory design concept is presented in details together with the launch window and flyby date analysis. Alternative targets for a possible mission extension scenario are also explored.

Creating New Identities in Design Education

ERIC Educational Resources Information Center

Mendoza, Hannah Rose; Bernasconi, Claudia; MacDonald, Nora M.

2007-01-01

An international education opportunity has been created for design students at West Virginia University. This experience is unique because it takes an interdisciplinary approach to design that exposes students to the idea of a larger design methodology common to design professions. Students take core courses with students from a variety of design…

Spectral diffraction efficiency characterization of broadband diffractive optical elements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choi, Junoh; Cruz-Cabrera, Alvaro Augusto; Tanbakuchi, Anthony

Diffractive optical elements, with their thin profile and unique dispersion properties, have been studied and utilized in a number of optical systems, often yielding smaller and lighter systems. Despite the interest in and study of diffractive elements, the application has been limited to narrow spectral bands. This is due to the etch depths, which are optimized for optical path differences of only a single wavelength, consequently leading to rapid decline in efficiency as the working wavelength shifts away from the design wavelength. Various broadband diffractive design methodologies have recently been developed that improve spectral diffraction efficiency and expand the workingmore » bandwidth of diffractive elements. We have developed diffraction efficiency models and utilized the models to design, fabricate, and test two such extended bandwidth diffractive designs.« less

Computer memory power control for the Galileo spacecraft

NASA Technical Reports Server (NTRS)

Detwiler, R. C.

1983-01-01

The developmental history, major design drives, and final topology of the computer memory power system on the Galileo spacecraft are described. A unique method of generating memory backup power directly from the fault current drawn during a spacecraft power overload or fault condition allows this system to provide continuous memory power. This concept provides a unique solution to the problem of volatile memory loss without the use of a battery of other large energy storage elements usually associated with uninterrupted power supply designs.

Zeolite-like metal–organic frameworks (ZMOFs): Design, synthesis, and properties

DOE PAGES

Eddaoudi, Mohamed; Sava, Dorina F.; Eubank, Jarrod F.; ...

2015-10-24

This study highlights various design and synthesis approaches toward the construction of ZMOFs, which are metal–organic frameworks (MOFs) with topologies and, in some cases, features akin to traditional inorganic zeolites. The interest in this unique subset of MOFs is correlated with their exceptional characteristics arising from the periodic pore systems and distinctive cage-like cavities, in conjunction with modular intra- and/or extra-framework components, which ultimately allow for tailoring of the pore size, pore shape, and properties towards specific applications.

Statistical Considerations of Food Allergy Prevention Studies.

PubMed

Bahnson, Henry T; du Toit, George; Lack, Gideon

Clinical studies to prevent the development of food allergy have recently helped reshape public policy recommendations on the early introduction of allergenic foods. These trials are also prompting new research, and it is therefore important to address the unique design and analysis challenges of prevention trials. We highlight statistical concepts and give recommendations that clinical researchers may wish to adopt when designing future study protocols and analysis plans for prevention studies. Topics include selecting a study sample, addressing internal and external validity, improving statistical power, choosing alpha and beta, analysis innovations to address dilution effects, and analysis methods to deal with poor compliance, dropout, and missing data. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogomilov, M.; Matev, R.; Tsenov, R.

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable ofmore » making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.« less

Neutrino factory

DOE PAGES

Bogomilov, M.; Matev, R.; Tsenov, R.; ...

2014-12-08

The properties of the neutrino provide a unique window on physics beyond that described by the standard model. The study of subleading effects in neutrino oscillations, and the race to discover CP-invariance violation in the lepton sector, has begun with the recent discovery that theta(13) > 0. The measured value of theta(13) is large, emphasizing the need for a facility at which the systematic uncertainties can be reduced to the percent level. The neutrino factory, in which intense neutrino beams are produced from the decay of muons, has been shown to outperform all realistic alternatives and to be capable ofmore » making measurements of the requisite precision. Its unique discovery potential arises from the fact that only at the neutrino factory is it practical to produce high-energy electron (anti) neutrino beams of the required intensity. This paper presents the conceptual design of the neutrino factory accelerator facility developed by the European Commission Framework Programme 7 EURO nu. Design Study consortium. EURO nu coordinated the European contributions to the International Design Study for the Neutrino Factory (the IDS-NF) collaboration. The EURO nu baseline accelerator facility will provide 10(21) muon decays per year from 12.6 GeV stored muon beams serving a single neutrino detector situated at a source-detector distance of between 1 500 km and 2 500 km. A suite of near detectors will allow definitive neutrino-scattering experiments to be performed.« less

Serum uric acid levels and multiple health outcomes: umbrella review of evidence from observational studies, randomised controlled trials, and Mendelian randomisation studies.

PubMed

Li, Xue; Meng, Xiangrui; Timofeeva, Maria; Tzoulaki, Ioanna; Tsilidis, Konstantinos K; Ioannidis, John PA; Campbell, Harry; Theodoratou, Evropi

2017-06-07

Objective  To map the diverse health outcomes associated with serum uric acid (SUA) levels. Design  Umbrella review. Data sources  Medline, Embase, Cochrane Database of Systematic Reviews, and screening of citations and references. Eligibility criteria  Systematic reviews and meta-analyses of observational studies that examined associations between SUA level and health outcomes, meta-analyses of randomised controlled trials that investigated health outcomes related to SUA lowering treatment, and Mendelian randomisation studies that explored the causal associations of SUA level with health outcomes. Results  57 articles reporting 15 systematic reviews and144 meta-analyses of observational studies (76 unique outcomes), 8 articles reporting 31 meta-analyses of randomised controlled trials (20 unique outcomes), and 36 articles reporting 107 Mendelian randomisation studies (56 unique outcomes) met the eligibility criteria. Across all three study types, 136 unique health outcomes were reported. 16 unique outcomes in meta-analyses of observational studies had P<10 -6 , 8 unique outcomes in meta-analyses of randomised controlled trials had P<0.001, and 4 unique outcomes in Mendelian randomisation studies had P<0.01. Large between study heterogeneity was common (80% and 45% in meta-analyses of observational studies and of randomised controlled trials, respectively). 42 (55%) meta-analyses of observational studies and 7 (35%) meta-analyses of randomised controlled trials showed evidence of small study effects or excess significance bias. No associations from meta-analyses of observational studies were classified as convincing; five associations were classified as highly suggestive (increased risk of heart failure, hypertension, impaired fasting glucose or diabetes, chronic kidney disease, coronary heart disease mortality with high SUA levels). Only one outcome from randomised controlled trials (decreased risk of nephrolithiasis recurrence with SUA lowering treatment) had P<0.001, a 95% prediction interval excluding the null, and no large heterogeneity or bias. Only one outcome from Mendelian randomisation studies (increased risk of gout with high SUA levels) presented convincing evidence. Hypertension and chronic kidney disease showed concordant evidence in meta-analyses of observational studies, and in some (but not all) meta-analyses of randomised controlled trials with respective intermediate or surrogate outcomes, but they were not statistically significant in Mendelian randomisation studies. Conclusion  Despite a few hundred systematic reviews, meta-analyses, and Mendelian randomisation studies exploring 136 unique health outcomes, convincing evidence of a clear role of SUA level only exists for gout and nephrolithiasis. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Going Green: Lecture Assignments and Lab Experiences for the College Curriculum

ERIC Educational Resources Information Center

Haack, Julie A.; Hutchison, James E.; Kirchhoff, Mary M.; Levy, Irvin J.

2005-01-01

Green chemistry, the design of chemical products and processes to eliminate hazards to human health and the environment, provides unique opportunities for innovation in the chemistry curriculum for engaging a broad spectrum of students in the study of chemistry. The green chemistry community is expanding efforts to develop educational materials…

Performance-Pay for Teachers: Designing a System That Students Deserve

ERIC Educational Resources Information Center

Center for Teaching Quality, 2007

2007-01-01

Eighteen highly accomplished and diverse teachers from across America have spent the last year studying various efforts in creating alternatives in the way that teachers have been traditionally compensated. In this report, these educators offer unique solutions based on their understanding of the professional work of teachers, the best current…

Effects of a Peer-Mediated Intervention on Social Interactions of Students with Low-Functioning Autism and Perceptions of Typical Peers

ERIC Educational Resources Information Center

Simpson, Lisa A.; Bui, Yvonne

2016-01-01

Students with autism display challenges acquiring friendships and participating in relationships with typical peers. Social interaction is further impacted in students with low-functioning autism, necessitating consideration of their unique characteristics when designing and implementing interventions. This single-subject study examined the…

Conditions and Practices of Successful Principalship in Shanghai

ERIC Educational Resources Information Center

Wong, Kam-cheung

2005-01-01

Purpose: Aims to study successful school principals in China and to provide details of some unique features of the Chinese educational system that both support and constrain principals and their management of schools. Design/methodology/approach: Examines the philosophy and practice of new principals of two schools, both in Shanghai, but at…

Understanding Individual Behavior: 6427.02.

ERIC Educational Resources Information Center

Norris, Jack A., Jr.

A course was designed to study the causes of individual behavior through an analysis of the factors involved in the development of personality, with special emphasis on the individual's perception and unique response to his environment. The course is based on the premise that the learner will investigate how and why people behave and then attempt…

Romantic Attachment and Relationship Functioning in Same-Sex Couples

ERIC Educational Resources Information Center

Mohr, Jonathan J.; Selterman, Dylan; Fassinger, Ruth E.

2013-01-01

The present study was designed to investigate links between dimensions of romantic attachment and relationship functioning in a cross-sectional sample of people in same-sex relationships, with the goals of replicating basic findings from research on heterosexual couples and advancing understanding of unique issues faced by same-sex couples. The…

Learning Instructor Intervention from MOOC Forums: Early Results and Issues

ERIC Educational Resources Information Center

Kumar, Muthu; Kan, Min-Yen; Tan, Bernard C. Y.; Ragupathi, Kiruthika

2015-01-01

With large student enrollment, MOOC instructors face the unique challenge in deciding when to intervene in forum discussions with their limited bandwidth. We study this problem of "instructor intervention." Using a large sample of forum data culled from 61 courses, we design a binary classifier to predict whether an instructor should…

Universal Design: Supporting Students with Color Vision Deficiency (CVD) in Medical Education

ERIC Educational Resources Information Center

Meeks, Lisa M.; Jain, Neera R.; Herzer, Kurt R.

2016-01-01

Color Vision Deficiency (CVD) is a commonly occurring condition in the general population. For medical students, it has the potential to create unique challenges in the classroom and clinical environments. Few studies have provided medical educators with comprehensive recommendations to assist students with CVD. This article presents a focused…

Student Teacher Assessment Feedback Preferences: The Influence of Cognitive Styles and Gender

ERIC Educational Resources Information Center

Evans, Carol; Waring, Michael

2011-01-01

The enhancement of assessment feedback is an international concern. This study is unique in its exploration of the nature of the relationship between student teachers' assessment feedback preferences, cognitive styles and gender, with a view to informing the development of assessment feedback practices and course design within initial teacher…

Individual, Familial, Friends-Related and Contextual Predictors of Early Sexual Intercourse

ERIC Educational Resources Information Center

Boislard P., Marie-Aude; Poulin, Francois

2011-01-01

This study examined the unique and simultaneous contribution of adolescents' characteristics, parent-child relationship and friends' characteristics on early sexual intercourse, while accounting for family status. A longitudinal multi-sample design was used. The first sample was recruited in a suburban context (n = 265; 62% girls) and the second…

Stuttering Frequency in Relation to Lexical Diversity, Syntactic Complexity, and Utterance Length

ERIC Educational Resources Information Center

Wagovich, Stacy A.; Hall, Nancy E.

2018-01-01

Children's frequency of stuttering can be affected by utterance length, syntactic complexity, and lexical content of language. Using a unique small-scale within-subjects design, this study explored whether language samples that contain more stuttering have (a) longer, (b) syntactically more complex, and (c) lexically more diverse utterances than…

Saskatchewan's (Canada) Regional Centre of Expertise on Education for Sustainable Development

ERIC Educational Resources Information Center

Dahms, Tanya; McMartin, Dena; Petry, Roger

2008-01-01

Purpose: The purpose of this paper is to describe the unique collaborative process initiated at the University of Regina in Saskatchewan, Canada, to develop a Regional Centre of Expertise (RCE) on Education for Sustainable Development (ESD) through the United Nations University-Institute of Advanced Studies (UNU-IAS). Design/methodology/approach:…

Aquatic Habitats: Exploring Desktop Ponds. Teacher's Guide.

ERIC Educational Resources Information Center

Barrett, Katharine; Willard, Carolyn

This book, for grades 2-6, is designed to provide students with a highly motivating and unique opportunity to investigate an aquatic habitat. Students set up, observe, study, and reflect upon their own "desktop ponds." Accessible plants and small animals used in these activities include Elodea, Tubifex worms, snails, mosquito larvae, and fish.…

Osborne. A Teacher's Handbook.

ERIC Educational Resources Information Center

Cooper, Rosemary; Fordham, Jennie

Osborne, located on the Isle of Wight, is almost entirely Victorian. It was designed, built, and furnished to the royal family's specifications (as a holiday home), and remains largely unaltered since Queen Victoria died in 1901. It offers unique resources for those studying not only the Victorian royal family but other aspects of 19th-century…

Design Two-dimensional Materials with Superb Electronic and Optoelectronic Properties: The case of SiS

NASA Astrophysics Data System (ADS)

Wei, Su-Huai; Yang, Ji-Hui; Zhang, Yueyu; Yin, Wan-Jian; Gong, X. G.; Yakobson, Boris I.

Two-dimensional (2D) semiconductors have many unique electronic and optoelectronic properties that is suitable for novel device applications. Most of the current study are focused on group IV or transition metal chalcogenides. In this study, using atomic transmutation and global optimization methods, we identified two group IV-VI 2D materials, Pma2-SiS and silicene sulfide that can overcome shortcomings encountered in conventional 2D semiconducttord. Pma2-SiS is found to be both chemically, energetically, and thermally stable. Most importantly, Pma2-SiS has unique electronic and optoelectronic properties, including direct bandgaps suitable for solar cells, good mobility for nanoelectronics, good flexibility of property tuning by layer thickness and strain appliance, and good air stability as well. Therefore, Pma2-SiS is expected to be a very promising 2D material in the field of 2D electronics and optoelectronics. Silicene sulfide also shows similar properties. We believe that the designing principles and approaches used to identify these materials have great potential to accelerate future finding of new functional materials within the 2D families.

The Use of Environmental Test Facilities for Purposes Beyond Their Original Design

NASA Technical Reports Server (NTRS)

Fisher, Terry C.; Marner, W. J.

2000-01-01

Increasing demands from space flight project offices are requiring environmental testing facilities to become more versatile with increased capabilities. At the same time, maintaining a cost-effective approach to test operations has driven efforts to use these facilities for purposes beyond their original design. This paper presents an overview of the Jet Propulsion Laboratory's efforts to provide JPL's space flight projects with test facilities to meet unique test requirements and to serve the needs of selected outside customers. The large number of recent Mars Missions, including the Mars Pathfinder project, have required testing of components and systems in a Martian surface environment in facilities originally designed for deep space testing. The unique problems associated with performing these tests are discussed, along with practical solutions. Other unique test requirements are discussed including the use of space simulation chambers for testing high altitude balloon gondolas and the use of vacuum chambers for system level test firing of an ion propulsion engine.

No Need to Wait for Superman: A Case Study of One Unique High School

ERIC Educational Resources Information Center

Ratcliff, N. J.; Jones, C. R.; Costner, R. H.; Knight, C.; Disney, G.; Savage-Davis, E.; Sheehan, H.; Hunt, G. H.

2012-01-01

Based on a theoretical model developed by Schlechty, this case study focuses on a small high school, located on a college campus and designed to address the educational needs of gifted 9th- through 12th-grade students. Eight teachers who taught 9th- and 12th-grade classes and their 60 students were observed. Each teacher was observed during six…

Can the impact on health of a government policy designed to create more liveable neighbourhoods be evaluated? An overview of the RESIDential Environment Project.

PubMed

Giles-Corti, Billie; Knuiman, Matthew; Pikora, Terri J; Van Neil, Kimberly; Timperio, Anna; Bull, Fiona C L; Shilton, Trevor; Bulsara, Max

2007-01-01

There is growing interest in the impact of community design on the health of residents. In 1998, the Western Australian Government began a trial of new subdivision design codes (i.e. Liveable Neighbourhoods Community Design Code) aimed at creating pedestrian-friendly neighbourhoods to increase walking, cycling and public transport use. The trial provided a unique opportunity for a natural experiment to evaluate the impact of a government planning policy on residents. Nevertheless, evaluations of this kind present a number of methodological challenges in obtaining the highest quality evidence possible. This paper describes the RESIDential Environment Project's study design and discusses how various methodological challenges were overcome.

Regulatory Considerations in the Design and Manufacturing of Implantable 3D‐Printed Medical Devices

PubMed Central

Morrison, Robert J.; Kashlan, Khaled N.; Flanangan, Colleen L.; Wright, Jeanne K.; Green, Glenn E.; Hollister, Scott J.

2015-01-01

Abstract Three‐dimensional (3D) printing, or additive manufacturing, technology has rapidly penetrated the medical device industry over the past several years, and innovative groups have harnessed it to create devices with unique composition, structure, and customizability. These distinctive capabilities afforded by 3D printing have introduced new regulatory challenges. The customizability of 3D‐printed devices introduces new complexities when drafting a design control model for FDA consideration of market approval. The customizability and unique build processes of 3D‐printed medical devices pose unique challenges in meeting regulatory standards related to the manufacturing quality assurance. Consistent material powder properties and optimal printing parameters such as build orientation and laser power must be addressed and communicated to the FDA to ensure a quality build. Postprinting considerations unique to 3D‐printed devices, such as cleaning, finishing and sterilization are also discussed. In this manuscript we illustrate how such regulatory hurdles can be navigated by discussing our experience with our group's 3D‐printed bioresorbable implantable device. PMID:26243449

Mechanical design of a lidar system for space applications - LITE

NASA Technical Reports Server (NTRS)

Crockett, Sharon K.

1990-01-01

The Lidar In-Space Technology Experiment (LITE) is a Shuttle experiment that will demonstrate the first use of a lidar system in space. Its design process must take into account not only the system design but also the unique design requirements for spaceborne experiment.

Innovative research methods for studying treatments for rare diseases: methodological review.

PubMed

Gagne, Joshua J; Thompson, Lauren; O'Keefe, Kelly; Kesselheim, Aaron S

2014-11-24

To examine methods for generating evidence on health outcomes in patients with rare diseases. Methodological review of existing literature. PubMed, Embase, and Academic Search Premier searched for articles describing innovative approaches to randomized trial design and analysis methods and methods for conducting observational research in patients with rare diseases. We assessed information related to the proposed methods, the specific rare disease being studied, and outcomes from the application of the methods. We summarize methods with respect to their advantages in studying health outcomes in rare diseases and provide examples of their application. We identified 46 articles that proposed or described methods for studying patient health outcomes in rare diseases. Articles covered a wide range of rare diseases and most (72%) were published in 2008 or later. We identified 16 research strategies for studying rare disease. Innovative clinical trial methods minimize sample size requirements (n=4) and maximize the proportion of patients who receive active treatment (n=2), strategies crucial to studying small populations of patients with limited treatment choices. No studies describing unique methods for conducting observational studies in patients with rare diseases were identified. Though numerous studies apply unique clinical trial designs and considerations to assess patient health outcomes in rare diseases, less attention has been paid to innovative methods for studying rare diseases using observational data. © Gagne et al 2014.

A comparative study of the Unified System for Orbit Computation and the Flight Design System. [computer programs for mission planning tasks associated with space shuttle

NASA Technical Reports Server (NTRS)

Maag, W.

1977-01-01

The Flight Design System (FDS) and the Unified System for Orbit Computation (USOC) are compared and described in relation to mission planning for the shuttle transportation system (STS). The FDS is designed to meet the requirements of a standardized production tool and the USOC is designed for rapid generation of particular application programs. The main emphasis in USOC is put on adaptability to new types of missions. It is concluded that a software system having a USOC-like structure, adapted to the specific needs of MPAD, would be appropriate to support planning tasks in the area unique to STS missions.

Mechanical System Analysis/Design Tool (MSAT) Quick Guide

NASA Technical Reports Server (NTRS)

Lee, HauHua; Kolb, Mark; Madelone, Jack

1998-01-01

MSAT is a unique multi-component multi-disciplinary tool that organizes design analysis tasks around object-oriented representations of configuration components, analysis programs and modules, and data transfer links between them. This creative modular architecture enables rapid generation of input stream for trade-off studies of various engine configurations. The data transfer links automatically transport output from one application as relevant input to the next application once the sequence is set up by the user. The computations are managed via constraint propagation - the constraints supplied by the user as part of any optimization module. The software can be used in the preliminary design stage as well as during the detail design of product development process.

The 15-meter diameter mechanically scanned deployable antenna

NASA Technical Reports Server (NTRS)

Coyner, J. V.; Herbert, J. J.; Bachtell, E. E.

1982-01-01

A preliminary design with structural model data and thermal-performance estimates of a 15-meter mechanically scanned deployable antenna (MSDA) that could be launched onboard a Shuttle Orbiter to provide radiometric brightness temperature maps of the Earth and oceans in selected bands over a frequency range from 1.4 to 11 GHz is provided. The study objectives were met through the design of a unique, integrated, offset feed mast and reflector design that uses the deployable box-truss structure as a building block. The performance of this system is summarized. The all graphite-epoxy, 4.57-meter prototype cube that was completed in 1981 and is proposed for this reflector and feed mast design is presented.

Correctional nursing: a study protocol to develop an educational intervention to optimize nursing practice in a unique context.

PubMed

Almost, Joan; Gifford, Wendy A; Doran, Diane; Ogilvie, Linda; Miller, Crystal; Rose, Don N; Squires, Mae

2013-06-21

Nurses are the primary healthcare providers in correctional facilities. A solid knowledge and expertise that includes the use of research evidence in clinical decision making is needed to optimize nursing practice and promote positive health outcomes within these settings. The institutional emphasis on custodial care within a heavily secured, regulated, and punitive environment presents unique contextual challenges for nursing practice. Subsequently, correctional nurses are not always able to obtain training or ongoing education that is required for broad scopes of practice. The purpose of the proposed study is to develop an educational intervention for correctional nurses to support the provision of evidence-informed care. A two-phase mixed methods research design will be used. The setting will be three provincial correctional facilities. Phase one will focus on identifying nurses' scope of practice and practice needs, describing work environment characteristics that support evidence-informed practice and developing the intervention. Semi-structured interviews will be completed with nurses and nurse managers. To facilitate priorities for the intervention, a Delphi process will be used to rank the learning needs identified by participants. Based on findings, an online intervention will be developed. Phase two will involve evaluating the acceptability and feasibility of the intervention to inform a future experimental design. The context of provincial correctional facilities presents unique challenges for nurses' provision of care. This study will generate information to address practice and learning needs specific to correctional nurses. Interventions tailored to barriers and supports within specific contexts are important to enable nurses to provide evidence-informed care.

Design development of graphite primary structures enables SSTO success

NASA Astrophysics Data System (ADS)

Biagiotti, V. A.; Yahiro, J. S.; Suh, Daniel E.; Hodges, Eric R.; Prior, Donald J.

1997-01-01

This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA's X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman's approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Section Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria.

New Boundary Constraints for Elliptic Systems used in Grid Generation Problems

NASA Technical Reports Server (NTRS)

Kaul, Upender K.; Clancy, Daniel (Technical Monitor)

2002-01-01

This paper discusses new boundary constraints for elliptic partial differential equations as used in grid generation problems in generalized curvilinear coordinate systems. These constraints, based on the principle of local conservation of thermal energy in the vicinity of the boundaries, are derived using the Green's Theorem. They uniquely determine the so called decay parameters in the source terms of these elliptic systems. These constraints' are designed for boundary clustered grids where large gradients in physical quantities need to be resolved adequately. It is observed that the present formulation also works satisfactorily for mild clustering. Therefore, a closure for the decay parameter specification for elliptic grid generation problems has been provided resulting in a fully automated elliptic grid generation technique. Thus, there is no need for a parametric study of these decay parameters since the new constraints fix them uniquely. It is also shown that for Neumann type boundary conditions, these boundary constraints uniquely determine the solution to the internal elliptic problem thus eliminating the non-uniqueness of the solution of an internal Neumann boundary value grid generation problem.

South Africa: the new world of disability.

PubMed

Coetzer, Pieter

2008-01-01

Over the past 10 years, unique business imperatives in South Africa have led to innovative risk product design, some of which are still unfamiliar to the rest of the world. The main drivers are: the unique mix of first- and third-world societies in our country, and an energetic marketing force operating in an already highly saturated insurance market. As a result, new product design has become one of the most effective ways to grow new business volumes in this competitive environment. This article reviews some of the unique products available and their advantages, target markets and disadvantages. The products that are discussed include lump sum total and permanent disability benefits, extended critical illness products, cover for impairment of function as well as risk products for people living with HIV/AIDS.

Description of the control system design for the SSF PMAD DC testbed

NASA Technical Reports Server (NTRS)

Baez, Anastacio N.; Kimnach, Greg L.

1991-01-01

The Power Management and Distribution (PMAD) DC Testbed Control System for Space Station Freedom was developed using a top down approach based on classical control system and conventional terrestrial power utilities design techniques. The design methodology includes the development of a testbed operating concept. This operating concept describes the operation of the testbed under all possible scenarios. A unique set of operating states was identified and a description of each state, along with state transitions, was generated. Each state is represented by a unique set of attributes and constraints, and its description reflects the degree of system security within which the power system is operating. Using the testbed operating states description, a functional design for the control system was developed. This functional design consists of a functional outline, a text description, and a logical flowchart for all the major control system functions. Described here are the control system design techniques, various control system functions, and the status of the design and implementation.

NASA GISS Climate Change Research Initiative: A Multidisciplinary Vertical Team Model for Improving STEM Education by Using NASA's Unique Capabilities.

NASA Astrophysics Data System (ADS)

Pearce, M. D.

2017-12-01

CCRI is a year-long STEM education program designed to bring together teams of NASA scientists, graduate, undergraduate and high school interns and high school STEM educators to become immersed in NASA research focused on atmospheric and climate changes in the 21st century. GISS climate research combines analysis of global datasets with global models of atmospheric, land surface, and oceanic processes to study climate change on Earth and other planetary atmospheres as a useful tool in assessing our general understanding of climate change. CCRI interns conduct research, gain knowledge in assigned research discipline, develop and present scientific presentations summarizing their research experience. Specifically, CCRI interns write a scientific research paper explaining basic ideas, research protocols, abstract, results, conclusion and experimental design. Prepare and present a professional presentation of their research project at NASA GISS, prepare and present a scientific poster of their research project at local and national research symposiums along with other federal agencies. CCRI Educators lead research teams under the direction of a NASA GISS scientist, conduct research, develop research based learning units and assist NASA scientists with the mentoring of interns. Educators create an Applied Research STEM Curriculum Unit Portfolio based on their research experience integrating NASA unique resources, tools and content into a teacher developed unit plan aligned with the State and NGSS standards. STEM Educators also Integrate and implement NASA unique units and content into their STEM courses during academic year, perform community education STEM engagement events, mentor interns in writing a research paper, oral research reporting, power point design and scientific poster design for presentation to local and national audiences. The CCRI program contributes to the Federal STEM Co-STEM initiatives by providing opportunities, NASA education resources and programing that improve STEM instruction, increase and sustain youth and public engagement in STEM, enhance STEM experience of undergraduate students, better serve groups under-represented groups in STEM fields and design graduate education for tomorrow's STEM workforce.

The 16th Aerospace Mechanisms Symposium

NASA Technical Reports Server (NTRS)

1982-01-01

A technology survey of devices designed for use in space operations is presented. Technological areas covered include design of unique ground support equipment, orbiter specialized hardware, payload deployment, and positioning.

Lehigh Design Course

ERIC Educational Resources Information Center

Grassi, Vincent G.; Luyben, William L.; Silebi, Cesar A.

2011-01-01

This paper discusses a two-semester senior design course that combines traditional steady-state economic process design with dynamic plantwide control. This unique course has been taught at Lehigh for more than a decade and has garnered rave reviews from students, industry, and ABET. Each student design group has its own industrial consultant who…

Excavator Design Validation

NASA Technical Reports Server (NTRS)

Pholsiri, Chalongrath; English, James; Seberino, Charles; Lim, Yi-Je

2010-01-01

The Excavator Design Validation tool verifies excavator designs by automatically generating control systems and modeling their performance in an accurate simulation of their expected environment. Part of this software design includes interfacing with human operations that can be included in simulation-based studies and validation. This is essential for assessing productivity, versatility, and reliability. This software combines automatic control system generation from CAD (computer-aided design) models, rapid validation of complex mechanism designs, and detailed models of the environment including soil, dust, temperature, remote supervision, and communication latency to create a system of high value. Unique algorithms have been created for controlling and simulating complex robotic mechanisms automatically from just a CAD description. These algorithms are implemented as a commercial cross-platform C++ software toolkit that is configurable using the Extensible Markup Language (XML). The algorithms work with virtually any mobile robotic mechanisms using module descriptions that adhere to the XML standard. In addition, high-fidelity, real-time physics-based simulation algorithms have also been developed that include models of internal forces and the forces produced when a mechanism interacts with the outside world. This capability is combined with an innovative organization for simulation algorithms, new regolith simulation methods, and a unique control and study architecture to make powerful tools with the potential to transform the way NASA verifies and compares excavator designs. Energid's Actin software has been leveraged for this design validation. The architecture includes parametric and Monte Carlo studies tailored for validation of excavator designs and their control by remote human operators. It also includes the ability to interface with third-party software and human-input devices. Two types of simulation models have been adapted: high-fidelity discrete element models and fast analytical models. By using the first to establish parameters for the second, a system has been created that can be executed in real time, or faster than real time, on a desktop PC. This allows Monte Carlo simulations to be performed on a computer platform available to all researchers, and it allows human interaction to be included in a real-time simulation process. Metrics on excavator performance are established that work with the simulation architecture. Both static and dynamic metrics are included.

Evaluating brain-computer interface performance using color in the P300 checkerboard speller.

PubMed

Ryan, D B; Townsend, G; Gates, N A; Colwell, K; Sellers, E W

2017-10-01

Current Brain-Computer Interface (BCI) systems typically flash an array of items from grey to white (GW). The objective of this study was to evaluate BCI performance using uniquely colored stimuli. In addition to the GW stimuli, the current study tested two types of color stimuli (grey to color [GC] and color intensification [CI]). The main hypotheses were that in a checkboard paradigm, unique color stimuli will: (1) increase BCI performance over the standard GW paradigm; (2) elicit larger event-related potentials (ERPs); and, (3) improve offline performance with an electrode selection algorithm (i.e., Jumpwise). Online results (n=36) showed that GC provides higher accuracy and information transfer rate than the CI and GW conditions. Waveform analysis showed that GC produced higher amplitude ERPs than CI and GW. Information transfer rate was improved by the Jumpwise-selected channel locations in all conditions. Unique color stimuli (GC) improved BCI performance and enhanced ERPs. Jumpwise-selected electrode locations improved offline performance. These results show that in a checkerboard paradigm, unique color stimuli increase BCI performance, are preferred by participants, and are important to the design of end-user applications; thus, could lead to an increase in end-user performance and acceptance of BCI technology. Copyright © 2017 International Federation of Clinical Neurophysiology. All rights reserved.

Acculturative Dissonance and Risks for Proactive and Reactive Aggression Among Latino/a Adolescents: Implications for Culturally Relevant Prevention and Interventions.

PubMed

Williford, Anne; Fite, Paula J; Johnson-Motoyama, Michelle; Frazer, Andrew L

2015-12-01

There is a dearth of studies concerning the functions of aggression among Latino/a youth despite the fact they are one of the fastest growing youth populations in the United States. We examined individual, peer, cultural, and community level indicators of reactive and proactive aggression and determined whether these relationships were moderated by acculturative dissonance (e.g., culturally specific family conflicts arising from the acculturation process) among a sample of Latino/a adolescents who were predominantly of Mexican heritage. Consistent with prior evidence, results revealed that peer delinquency was uniquely associated with proactive aggression, whereas impulsivity was uniquely associated with reactive aggression. Further, acculturative dissonance was uniquely associated with proactive but not reactive aggression. No moderating effects for acculturative dissonance were found, indicating that the significant risk factors in our study were associated with proactive and reactive aggression regardless of the level of acculturative dissonance experienced. Notably, acculturative dissonance was a unique risk factor for proactive aggression and thus may be an important target for prevention and interventions among Latino/a youth. Consequently, interventions designed to prevent culturally specific family conflicts and promote family functioning may be particularly useful in mitigating the risk of aggression intended to achieve social and material awards among in this population.

Proposal for Development of EBM-CDSS (Evidence-based Clinical Decision Support System) to Aid Prognostication in Terminally Ill Patients

DTIC Science & Technology

2012-10-01

critically ill patients using artificial neural network synthesised by genetic algorithm,” The Lancet, vol. 347, (no. 9009), pp. 1146-1150, 1996...criterion (Table 2). Statistical Analysis Annual progress report page 46 Data synthesis was conducted according to the study design separately as... synthesis of results across included studies was not performed in the study by Detterbeck and Gibson4 which was undertaken in our study. Another unique

Unique catalytic activities and scaffolding of p21 activated kinase-1 in cardiovascular signaling.

PubMed

Ke, Yunbo; Lei, Ming; Wang, Xin; Solaro, R John

2013-09-27

P21 activated kinase-1 (Pak1) has diverse functions in mammalian cells. Although a large number of phosphoproteins have been designated as Pak1 substrates from in vitro studies, emerging evidence has indicated that Pak1 may function as a signaling molecule through a unique molecular mechanism - scaffolding. By scaffolding, Pak1 delivers signals through an auto-phosphorylation-induced conformational change without transfer of a phosphate group to its immediate downstream effector(s). Here we review evidence for this regulatory mechanism based on structural and functional studies of Pak1 in different cell types and research models as well as in vitro biochemical assays. We also discuss the implications of Pak1 scaffolding in disease-related signaling processes and the potential in cardiovascular drug development.

Using Human Factors Methods to Design a New Interface for an Electronic Medical Record

PubMed Central

Saleem, Jason J.; Patterson, Emily S.; Militello, Laura; Asch, Steven M.; Doebbeling, Bradley N.; Render, Marta L.

2007-01-01

The Veterans Health Administration (VHA) is a leader in development and use of electronic patient records and clinical decision support. The VHA is currently reengineering a somewhat dated platform for its Computerized Patient Record System (CPRS). This process affords a unique opportunity to implement major changes to the current design and function of the system. We report on two human factors studies designed to provide input and guidance during this reengineering process. One study involved a card sort to better understand how providers tend to cognitively organize clinical data, and how that understanding can help guide interface design. The other involved a simulation to assess the impact of redesign modifications on computerized clinical reminders, a form of clinical decision support in the CPRS, on the learnability of the system for first-time users. PMID:18693914

2017 Robotic Mining Competition

NASA Image and Video Library

2017-05-23

Team members from Purdue University prepare their uniquely-designed robot miner in the RoboPit at NASA's 8th Annual Robotic Mining Competition at the Kennedy Space Center Visitor Complex in Florida. More than 40 student teams from colleges and universities around the U.S. will use their uniquely-designed mining robots to dig in a supersized sandbox filled with BP-1, or simulated Martian soil, and participate in other competition requirements. The Robotic Mining Competition is a NASA Human Exploration and Operations Mission Directorate project designed to encourage students in science, technology, engineering and math, or STEM fields. The project provides a competitive environment to foster innovative ideas and solutions that could be used on NASA's Journey to Mars.

New library building: Mercer University School of Medicine, Macon, Georgia.

PubMed Central

Rankin, J A; Bernard, G R

1984-01-01

The Mercer University School of Medicine (MUSM) enrolled its charter class in 1982. The curriculum is problem-based and adaptable to the learning needs of each student. MUSM is housed in a new building designed to support this unique educational program. Its library is an example of a comparatively small, but fully functional, medical school library. The planning process, design, and layout of the new library facility are described. Among its unique features are an integrated print and non-print collection, current periodical display space, and extensive use of task lighting. PMID:6733330

The University of Utah's Integrated Core: A Case Study from a "Commuter Campus"

ERIC Educational Resources Information Center

Paisley, Karen; Spencer, Callie; Wells, Mary Sarah; Schwab, Keri

2013-01-01

This paper describes the Integrated Core (IC), the University of Utah's version of integrated curricula. We begin with a rationale for the IC, providing a background on the unique student demographics, and University-wide requirements that propelled our design. Our IC focuses specifically on active living, sustainability, and social justice as…

"Talking Tools": Sloyd Processes Become Multimodal Stories with Smartphone Documentation

ERIC Educational Resources Information Center

Wiklund-Engblom, Annika; Hiltunen, Kasper; Hartvik, Juha; Porko-Hudd, Mia; Johansson, Marléne

2014-01-01

The study presented is part of a work-in-progress project of developing a mobile application for smartphones, Talking Tools (TT). The first context TT is developed for and tested in is sloyd education [Swedish: slöjd], a compulsory subject taught in Finnish schools. In sloyd learners design and manufacture unique artifacts in various materials…

Responses to Struggling, K-2 Readers and Writers: Early Literacy Intervention in Three Urban Schools

ERIC Educational Resources Information Center

Mooney, Kathleen C.

2009-01-01

An abundance of research on early literacy intervention indicates that struggling, K-2 readers and writers can be effectively supported through the receipt of intervention services in school; however, research in the area has not yet addressed study of the unique, contextualized design and implementation of early literacy intervention in different…

Are Career Centers Worthwhile?: Predicting Unique Variance in Career Outcomes through Career Center Usage

ERIC Educational Resources Information Center

Brotheridge, Celeste M.; Power, Jacqueline L.

2008-01-01

Purpose: This study seeks to examine the extent to which the use of career center services results in the significant incremental prediction of career outcomes beyond its established predictors. Design/methodology/approach: The authors survey the clients of a public agency's career center and use hierarchical multiple regressions in order to…

Strategy Revitalization in Academe: A Balanced Scorecard Approach

ERIC Educational Resources Information Center

McDevitt, Roselie; Giapponi, Catherine; Solomon, Norman

2008-01-01

Purpose: The purpose of this paper is to present a unique version of the balanced scorecard developed and applied by the faculty of a university division. Design/methodology/approach: The paper uses a case study approach and uses the experiences of the faculty of a business school to describe the process and benefits of developing a custom…

Common and Unique Impairments in Facial-Expression Recognition in Pervasive Developmental Disorder-Not Otherwise Specified and Asperger's Disorder

ERIC Educational Resources Information Center

Uono, Shota; Sato, Wataru; Toichi, Motomi

2013-01-01

This study was designed to identify specific difficulties and associated features related to the problems with social interaction experienced by individuals with pervasive developmental disorder-not otherwise specified (PDD-NOS) using an emotion-recognition task. We compared individuals with PDD-NOS or Asperger's disorder (ASP) and typically…

The Perspectives of Students in the College of Basic Education on the Characteristics of Effective English Language Teachers

ERIC Educational Resources Information Center

Taqi, Hanan A.; Al-Nouh, Nowreyah A.; Akbar, Rahima S.

2014-01-01

This paper presents a research study designed to investigate the characteristics of effective teachers of English and the uniqueness of Teachers of English as a Foreign Language (EFL). The research is based on four general categories: English language proficiency, educational perception, organization and communication skills, social and emotional…

A Novel Interactive Online Module in a Traditional Curriculum through a Blended Learning Approach

ERIC Educational Resources Information Center

Gibbard, Leslie Laing; Salajan, Florin

2009-01-01

A unique approach was planned and implemented for undergraduate dental students that would reinforce the principles of removable partial denture (RPD) design. 162 students were grouped according to their year of dental studies (66 second-year students and 96 third-year students) within the Discipline of Prosthodontics at the Faculty of Dentistry,…

Walking and the Preservation of Cognitive Function in Older Populations

ERIC Educational Resources Information Center

Prohaska, Thomas R.; Eisenstein, Amy R.; Satariano, William A.; Hunter, Rebecca; Bayles, Constance M.; Kurtovich, Elaine; Kealey, Melissa; Ivey, Susan L.

2009-01-01

Purpose: This cross-sectional study takes a unique look at the association between patterns of walking and cognitive functioning by examining whether older adults with mild cognitive impairment differ in terms of the community settings where they walk and the frequency, intensity, or duration of walking. Design and Methods: The sample was based on…

Teaching Mixed-Mode: A Case Study in Remote Delivery of Computer Science in Africa

ERIC Educational Resources Information Center

Howell, Sheila; Harris, Michael; Wilkinson, Simon; Zuluaga, Catherine; Voutier, Paul

2004-01-01

In February 2003, RMIT University in Melbourne, Australia, commenced delivery of a Computer Science diploma and degree programme using mixed mode delivery to 250 university students in sub-Saharan Africa, through a World Bank funded project designed for the African Virtual University (AVU). The project is a unique experience made possible by…

Applied Statistics with SPSS

ERIC Educational Resources Information Center

Huizingh, Eelko K. R. E.

2007-01-01

Accessibly written and easy to use, "Applied Statistics Using SPSS" is an all-in-one self-study guide to SPSS and do-it-yourself guide to statistics. What is unique about Eelko Huizingh's approach is that this book is based around the needs of undergraduate students embarking on their own research project, and its self-help style is designed to…

Psychometrics in Support of a Valid Assessment of Linguistic Minorities: Implications for the Test and Sampling Designs

ERIC Educational Resources Information Center

Oliveri, María Elena; von Davier, Alina A.

2016-01-01

In this study, we propose that the unique needs and characteristics of linguistic minorities should be considered throughout the test development process. Unlike most measurement invariance investigations in the assessment of linguistic minorities, which typically are conducted after test administration, we propose strategies that focus on the…

The School Professionals' Role in Identification of Youth at Risk of Suicide

ERIC Educational Resources Information Center

Crawford, Shelley; Caltabiano, Nerina J.

2009-01-01

The school professional is in a unique position to play a strategic role in the early identification and prevention of youth suicide. The current study assessed North Queensland teachers' knowledge on youth suicide. The sample comprised 201 secondary school teachers. A survey research design was used and data was collected using a…

Sex Typing of Jobs in Hiring: Evidence from Japan

ERIC Educational Resources Information Center

Mun, Eunmi

2010-01-01

Using unique data on employers' pre-hire preferences, this article examines the effect of sex typing on the gender gap in offered wages and training. Previous studies using post-hire data have not been able to focus directly on the effects of employer behavior, distinct from employee preferences. By analyzing gender-designated job requisitions for…

Engaging Pupils in the Science, Engineering and Technology of a Low-Energy School

ERIC Educational Resources Information Center

Charnley, Fiona; Fleming, Paul; Fleming, Margaret; Mill, Greig

2010-01-01

The UK Government's Building Schools for the Future programme has provided schools with a unique opportunity to improve education for sustainable development substantially by giving pupils the chance to study within a real-life context. This article documents an engagement project in which experts in low-energy building design are facilitating…

Power Distance and Group Dynamics of an International Project Team: A Case Study

ERIC Educational Resources Information Center

Paulus, Trena M.; Bichelmeyer, Barbara; Malopinsky, Larissa; Pereira, Maura; Rastogi, Polly

2005-01-01

Project-based team activities are commonly used in higher education. Teams comprised of members from different national cultures can be faced with unique challenges during the creative process. Hofstede's (1991) cultural dimension of power distance was used to examine one such design team's intra- and inter-group interactions in a graduate-level…

Contexts That Matter to the Leadership Development of Latino Male College Students: A Mixed Methods Perspective

ERIC Educational Resources Information Center

Garcia, Gina A.; Huerta, Adrian H.; Ramirez, Jenesis J.; Patrón, Oscar E.

2017-01-01

As the number of Latino males entering college increases, there is a need to understand their unique leadership experiences. This study used a convergent parallel mixed methods design to understand what contexts contribute to Latino male undergraduate students' leadership development, capacity, and experiences. Quantitative data were gathered by…

Applying Research in Reading Comprehension to Social Studies Instruction for Middle and High School Students

ERIC Educational Resources Information Center

Swanson, Elizabeth; Wanzek, Jeanne

2014-01-01

Secondary-level content area teachers face unique challenges in helping their students successfully read, understand, and learn content from complex texts in their discipline. In this article, a set of research-based practices designed to provide effective and feasible instruction to improve students' reading and comprehension of text and content…

The seismotectonics of plate boundaries

NASA Technical Reports Server (NTRS)

Berger, J.; Brune, J. N.; Goodkind, J.; Wyatt, F.; Agnew, D. C.; Beaumont, C.

1981-01-01

Research on the seismotectonics of plate boundaries is summarized. Instrumental development and an observational program designed to study various aspects of the seismotectonics of southern California and the northern Gulf of California are described. A unique superconducting gravimeter was further developed and supported under this program for deployment and operation at several sites. Work on Earth tides is also discussed.

Music as Transitional Object and Practice: Children's Spontaneous Musical Behaviors in the Subway

ERIC Educational Resources Information Center

Custodero, Lori A.; Calì, Claudia; Diaz-Donoso, Adriana

2016-01-01

This study looks at children's music making in a public setting designed for society writ large. Although known to most children in the city, the subway presents a unique environment, both structurally predictable yet sonically dynamic; it is in continuous transition. Adopting Winnicott's psychoanalytical perspective, we make a case for viewing…

Short Term Intervention Model for Enhancing Divergent Thinking among School Aged Children

ERIC Educational Resources Information Center

Doron, Eyal

2016-01-01

Creative ability can be developed and improved through intervention and training. This study presents a unique and innovative intervention program for enhancing creative thinking among children, focusing on divergent thinking skills. The program was designed as a short-term (10 weeks) training and conducted with 150 school students ranging in age…

National Training Course. Emergency Medical Technician. Paramedic. Instructor's Lesson Plans. Module XII. Pediatrics and Neonatal.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This instructor's lesson plan guide on pediatrics and neonatal transport is one of fifteen modules designed for use in the training of emergency medical technicians (paramedics). Five units of study are presented: (1) approach to the pediatric patient including patient assessment; (2) pathophysiology and management of problems unique to the…

Single-Sex Classrooms: A Place for Transformation of Policy and Practice.

ERIC Educational Resources Information Center

Blair, Heather; Sanford, Kathy

Girls-only programs in Canadian public schools are a recent phenomenon; and, similar to the U.S. context, they have been designed primarily to provide equitable education for girls (boys programs are even newer and more scarce). A study investigated three such programs in Western Canada, each having similar and unique features. Research was…

Early Word Decoding Ability as a Longitudinal Predictor of Academic Performance

ERIC Educational Resources Information Center

Nordström, Thomas; Jacobson, Christer; Söderberg, Pernilla

2016-01-01

This study, using a longitudinal design with a Swedish cohort of young readers, investigates if children's early word decoding ability in second grade can predict later academic performance. In an effort to estimate the unique effect of early word decoding (grade 2) with academic performance (grade 9), gender and non-verbal cognitive ability were…

An Examination of Online Instructional Practices Based on the Learning Styles of Graduate Education Students

ERIC Educational Resources Information Center

Tonsing-Meyer, Julie

2013-01-01

The purpose of this qualitative case study was to understand the perceptions of online learning based on the learning styles of currently enrolled online graduate education students. Designing courses to provide meaningful experiences based on the learning styles of students, as well as the unique approaches to teaching online is a contemporary…

Consequential Creativity: Student Competency and Lateral Thinking Incorporation in Architectural Education

ERIC Educational Resources Information Center

Hamza, Tamer S.; Hassan, Doaa K.

2016-01-01

Creativity is an original cognitive ability and problem solving process which enables individuals to use their intelligence in a way that is unique and directed toward coming up with a product. Architectural education is one of the fields in which human creativity has been exhibited; because, it can be defined as a design study that correlates…

Lunar base habitat designs: Characterizing the environment, and selecting habitat designs for future trade-offs

NASA Technical Reports Server (NTRS)

Ganapathi, Gani B.; Ferrall, Joseph; Seshan, P. K.

1993-01-01

A survey of distinct conceptual lunar habitat designs covering the pre- and post-Apollo era is presented. The impact of the significant lunar environmental challenges such as temperature, atmosphere, radiation, soil properties, meteorites, and seismic activity on the habitat design parameters are outlined. Over twenty habitat designs were identified and classified according to mission type, crew size; total duration of stay, modularity, environmental protection measures, and emplacement. Simple selection criteria of (1) post-Apollo design, (2) uniqueness of the habitat design, (3) level of thoroughness in design layout, (4) habitat dimensions are provided, and (5) materials of construction for the habitat shell are specified, are used to select five habitats for future trade studies. Habitat emplacement scenarios are created to examine the possible impact of emplacement of the habitat in different locations, such as lunar poles vs. equatorial, above ground vs. below ground, etc.

Evaluation of occupational health interventions using a randomized controlled trial: challenges and alternative research designs.

PubMed

Schelvis, Roosmarijn M C; Oude Hengel, Karen M; Burdorf, Alex; Blatter, Birgitte M; Strijk, Jorien E; van der Beek, Allard J

2015-09-01

Occupational health researchers regularly conduct evaluative intervention research for which a randomized controlled trial (RCT) may not be the most appropriate design (eg, effects of policy measures, organizational interventions on work schedules). This article demonstrates the appropriateness of alternative designs for the evaluation of occupational health interventions, which permit causal inferences, formulated along two study design approaches: experimental (stepped-wedge) and observational (propensity scores, instrumental variables, multiple baseline design, interrupted time series, difference-in-difference, and regression discontinuity). For each design, the unique characteristics are presented including the advantages and disadvantages compared to the RCT, illustrated by empirical examples in occupational health. This overview shows that several appropriate alternatives for the RCT design are feasible and available, which may provide sufficiently strong evidence to guide decisions on implementation of interventions in workplaces. Researchers are encouraged to continue exploring these designs and thus contribute to evidence-based occupational health.

Evidence of Big-Five personality changes following acquired brain injury from a prospective longitudinal investigation.

PubMed

Leonhardt, Anne; Schmukle, Stefan C; Exner, Cornelia

2016-03-01

Many studies using different assessment methods have reported personality changes after acquired brain injury (ABI). However, to our knowledge, no prospective study has yet been conducted to examine whether previous cross-sectional and retrospective results can be replicated in a longitudinal prospective design. Further, because clinical control groups were only rarely used, it remains debatable if the personality changes found are unique to patients with ABI or if they also affect patients with other disabilities. This study examined personality change in 114 participants with different kinds of ABI, 1321 matched controls (general control, GC), and 746 matched participants with restrictive impairments other than brain injury (clinical control, CC) in a prospective longitudinal design using data from the panel survey Household, Income and Labour Dynamics in Australia (HILDA). Participants with ABI showed significantly larger declines in Extraversion and Conscientiousness compared with the GC group. When the ABI participants were compared with the CC group, only the difference in Conscientiousness remained significant. Our prospective data corroborate evidence from previous cross-sectional studies that patients with ABI experience larger declines in Extraversion and Conscientiousness than the general population. Whereas the effect on Conscientiousness was unique to patients with ABI, the decline in Extraversion was also observed in participants with other impairments. Copyright © 2016 Elsevier Inc. All rights reserved.

Reliability of digital ulcer definitions as proposed by the UK Scleroderma Study Group: A challenge for clinical trial design.

PubMed

Hughes, Michael; Tracey, Andrew; Bhushan, Monica; Chakravarty, Kuntal; Denton, Christopher P; Dubey, Shirish; Guiducci, Serena; Muir, Lindsay; Ong, Voon; Parker, Louise; Pauling, John D; Prabu, Athiveeraramapandian; Rogers, Christine; Roberts, Christopher; Herrick, Ariane L

2018-06-01

The reliability of clinician grading of systemic sclerosis-related digital ulcers has been reported to be poor to moderate at best, which has important implications for clinical trial design. The aim of this study was to examine the reliability of new proposed UK Scleroderma Study Group digital ulcer definitions among UK clinicians with an interest in systemic sclerosis. Raters graded (through a custom-built interface) 90 images (80 unique and 10 repeat) of a range of digital lesions collected from patients with systemic sclerosis. Lesions were graded on an ordinal scale of severity: 'no ulcer', 'healed ulcer' or 'digital ulcer'. A total of 23 clinicians - 18 rheumatologists, 3 dermatologists, 1 hand surgeon and 1 specialist rheumatology nurse - completed the study. A total of 2070 (1840 unique + 230 repeat) image gradings were obtained. For intra-rater reliability, across all images, the overall weighted kappa coefficient was high (0.71) and was moderate (0.55) when averaged across individual raters. Overall inter-rater reliability was poor (0.15). Although our proposed digital ulcer definitions had high intra-rater reliability, the overall inter-rater reliability was poor. Our study highlights the challenges of digital ulcer assessment by clinicians with an interest in systemic sclerosis and provides a number of useful insights for future clinical trial design. Further research is warranted to improve the reliability of digital ulcer definition/rating as an outcome measure in clinical trials, including examining the role for objective measurement techniques, and the development of digital ulcer patient-reported outcome measures.

When biomolecules meet graphene: from molecular level interactions to material design and applications.

PubMed

Li, Dapeng; Zhang, Wensi; Yu, Xiaoqing; Wang, Zhenping; Su, Zhiqiang; Wei, Gang

2016-12-01

Graphene-based materials have attracted increasing attention due to their atomically-thick two-dimensional structures, high conductivity, excellent mechanical properties, and large specific surface areas. The combination of biomolecules with graphene-based materials offers a promising method to fabricate novel graphene-biomolecule hybrid nanomaterials with unique functions in biology, medicine, nanotechnology, and materials science. In this review, we focus on a summarization of the recent studies in functionalizing graphene-based materials using different biomolecules, such as DNA, peptides, proteins, enzymes, carbohydrates, and viruses. The different interactions between graphene and biomolecules at the molecular level are demonstrated and discussed in detail. In addition, the potential applications of the created graphene-biomolecule nanohybrids in drug delivery, cancer treatment, tissue engineering, biosensors, bioimaging, energy materials, and other nanotechnological applications are presented. This review will be helpful to know the modification of graphene with biomolecules, understand the interactions between graphene and biomolecules at the molecular level, and design functional graphene-based nanomaterials with unique properties for various applications.

String theory--the physics of string-bending and other electric guitar techniques.

PubMed

Grimes, David Robert

2014-01-01

Electric guitar playing is ubiquitous in practically all modern music genres. In the hands of an experienced player, electric guitars can sound as expressive and distinct as a human voice. Unlike other more quantised instruments where pitch is a discrete function, guitarists can incorporate micro-tonality and, as a result, vibrato and sting-bending are idiosyncratic hallmarks of a player. Similarly, a wide variety of techniques unique to the electric guitar have emerged. While the mechano-acoustics of stringed instruments and vibrating strings are well studied, there has been comparatively little work dedicated to the underlying physics of unique electric guitar techniques and strings, nor the mechanical factors influencing vibrato, string-bending, fretting force and whammy-bar dynamics. In this work, models for these processes are derived and the implications for guitar and string design discussed. The string-bending model is experimentally validated using a variety of strings and vibrato dynamics are simulated. The implications of these findings on the configuration and design of guitars is also discussed.

Proliferative activity of elastin-like-peptides depends on charge and phase transition.

PubMed

Yuan, Yuan; Koria, Piyush

2016-03-01

Elastin-like-peptides (ELPs) are stimulus-responsive protein-based polymers and are attractive biomaterials due to their biocompatibility and unique properties. This study shows that in addition to their physical properties, ELPs have biological activities that are conducive to tissue regeneration. Specifically, we found that ELPs induce fibroblast proliferation via cell surface heparan sulfate proteoglycans (HSPG). Furthermore, our data suggests that ELP based materials with differential proliferative potential can be designed by controlling the interaction of ELPs with HSPGs by incorporating either hydrophobic or positively charged residues within the ELP sequence. Fibroblast proliferation is important for granulation tissue formation which is important in chronic wounds as well as in healing of other tissues. The customizable biological activity of ELPs coupled with their unique physical properties will enable us to design novel, sustainable and cost effective therapies for different tissue regeneration applications. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 697-706, 2016. © 2015 Wiley Periodicals, Inc.

A Comparison of Reinforcement Sensitivity Theory Measures: Unique Associations With Social Interaction Anxiety and Social Observation Anxiety.

PubMed

Kramer, Sam L; Rodriguez, Benjamin F

2018-07-01

Evidence suggests that the behavior inhibition system (BIS) and fight-flight-freeze system play a role in the individual differences seen in social anxiety disorder; however, findings concerning the role of the behavior approach system (BAS) have been mixed. To date, the role of revised reinforcement sensitivity theory (RST) subsystems underlying social anxiety has been measured with scales designed for the original RST. This study examined how the BIS, BAS, and fight, flight, freeze components of the fight-flight-freeze system uniquely relate to social interaction anxiety and social observation anxiety using both a measure specifically designed for the revised RST and a commonly used original RST measure. Comparison of regression analyses with the Jackson-5 and the commonly used BIS/BAS Scales revealed important differences in the relationships between RST subsystems and social anxiety depending on how RST was assessed. Limitations and future directions for revised RST measurement are discussed.

String Theory - The Physics of String-Bending and Other Electric Guitar Techniques

PubMed Central

Grimes, David Robert

2014-01-01

Electric guitar playing is ubiquitous in practically all modern music genres. In the hands of an experienced player, electric guitars can sound as expressive and distinct as a human voice. Unlike other more quantised instruments where pitch is a discrete function, guitarists can incorporate micro-tonality and, as a result, vibrato and sting-bending are idiosyncratic hallmarks of a player. Similarly, a wide variety of techniques unique to the electric guitar have emerged. While the mechano-acoustics of stringed instruments and vibrating strings are well studied, there has been comparatively little work dedicated to the underlying physics of unique electric guitar techniques and strings, nor the mechanical factors influencing vibrato, string-bending, fretting force and whammy-bar dynamics. In this work, models for these processes are derived and the implications for guitar and string design discussed. The string-bending model is experimentally validated using a variety of strings and vibrato dynamics are simulated. The implications of these findings on the configuration and design of guitars is also discussed. PMID:25054880

Hidden in plain sight: a crowdsourced public art contest to make automated external defibrillators more visible.

PubMed

Merchant, Raina M; Griffis, Heather M; Ha, Yoonhee P; Kilaru, Austin S; Sellers, Allison M; Hershey, John C; Hill, Shawndra S; Kramer-Golinkoff, Emily; Nadkarni, Lindsay; Debski, Margaret M; Padrez, Kevin A; Becker, Lance B; Asch, David A

2014-12-01

We sought to explore the feasibility of using a crowdsourcing study to promote awareness about automated external defibrillators (AEDs) and their locations. The Defibrillator Design Challenge was an online initiative that asked the public to create educational designs that would enhance AED visibility, which took place over 8 weeks, from February 6, 2014, to April 6, 2014. Participants were encouraged to vote for AED designs and share designs on social media for points. Using a mixed-methods study design, we measured participant demographics and motivations, design characteristics, dissemination, and Web site engagement. Over 8 weeks, there were 13 992 unique Web site visitors; 119 submitted designs and 2140 voted. The designs were shared 48 254 times on Facebook and Twitter. Most designers-voters reported that they participated to contribute to an important cause (44%) rather than to win money (0.8%). Design themes included: empowerment, location awareness, objects (e.g., wings, lightning, batteries, lifebuoys), and others. The Defibrillator Design Challenge engaged a broad audience to generate AED designs and foster awareness. This project provides a framework for using design and contest architecture to promote health messages.

Learn from the Core--Design from the Core

ERIC Educational Resources Information Center

Ockerse, Thomas

2012-01-01

The current objective, object-oriented approach to design is questioned along with design education viewed as a job-oriented endeavor. Instead relational knowledge and experience in a holistic sense, both tacit and explicit, are valued along with an appreciation of the unique character of the student. A new paradigm for design education is…

Commonality between Reduced Gravity and Microgravity Habitats for Long Duration Missions

NASA Technical Reports Server (NTRS)

Howard, Robert

2014-01-01

Many conceptual studies for long duration missions beyond Earth orbit have assumed unique habitat designs for each destination and for transit habitation. This may not be the most effective approach. A variable gravity habitat, one designed for use in microgravity, lunar, Martian, and terrestrial environments may provide savings that offset the loss of environment-specific optimization. However, a brief analysis of selected flown spacecraft and Constellation-era conceptual habitat designs suggests that one cannot simply lift a habitat from one environment and place it in another that it was not designed for without incurring significant human performance compromises. By comparison, a conceptual habitat based on the Skylab II framework but designed specifically to accommodate variable gravity environments can be shown to yield significant advantages while incurring only minimal human performance compromises.

COLD-SAT feasibility study safety analysis

NASA Technical Reports Server (NTRS)

Mchenry, Steven T.; Yost, James M.

1991-01-01

The Cryogenic On-orbit Liquid Depot-Storage, Acquisition, and Transfer (COLD-SAT) satellite presents some unique safety issues. The feasibility study conducted at NASA-Lewis desired a systems safety program that would be involved from the initial design in order to eliminate and/or control the inherent hazards. Because of this, a hazards analysis method was needed that: (1) identified issues that needed to be addressed for a feasibility assessment; and (2) identified all potential hazards that would need to be controlled and/or eliminated during the detailed design phases. The developed analysis method is presented as well as the results generated for the COLD-SAT system.

Co-Designing Mobile Apps to Assist in Clinical Nursing Education: A Study Protocol.

PubMed

O'Connor, Siobhan; Andrews, Tom

2016-01-01

Mobile applications (apps) to train health professionals is gaining momentum as the benefits of mobile learning (mLearning) are becoming apparent in complex clinical environments. However, most educational apps are generic, off-the-shelf pieces of software that do not take into consideration the unique needs of nursing students. The proposed study will apply a user-centred design process to create a tailored mobile app for nursing students to learn and apply clinical skills in practice. The app will be piloted and evaluated to understand how nursing students use mobile technology in clinical settings to support their learning and educational needs.

Monochromatic Names

ERIC Educational Resources Information Center

Main, Marisa J.

2009-01-01

The author describes a lesson for middle school students involving their names, with outlets for uniqueness and self-expression. Focusing on contrast, design elements, and a monochromatic color scheme, students created name designs that they loved. Tips for adaptation for special needs students are included. The lesson confirms basic design and…

Crew emergency return vehicle - Electrical power system design study

NASA Technical Reports Server (NTRS)

Darcy, E. C.; Barrera, T. P.

1989-01-01

A crew emergency return vehicle (CERV) is proposed to perform the lifeboat function for the manned Space Station Freedom. This escape module will be permanently docked to Freedom and, on demand, will be capable of safely returning the crew to earth. The unique requirements that the CERV imposes on its power source are presented, power source options are examined, and a baseline system is selected. It consists of an active Li-BCX DD-cell modular battery system and was chosen for the maturity of its man-rated design and its low development costs.

Design study LANDSAT follow-on mission unique communications system

NASA Technical Reports Server (NTRS)

1976-01-01

Spacecraft subsystem design, performance evaluation, and system tradeoffs are presented for the LANDSAT follow-on mission (LF/O) spacecraft to TDRSS link for the transmission of thematic mapper (TM) and multispectral scanner (MSS) data and for the LF/O spacecraft to STDN and other direct users link for the transmission of TM data. Included are requirements definition, link analysis, subsystem and hardware tradeoffs, conceptual selection, hardware definition, and identification of required new technology. Cost estimates of the recommended communication system including both recurring and non recurring costs are discussed.

CBPR with service providers: arguing a case for engaging practitioners in all phases of research.

PubMed

Spector, Anya Y

2012-03-01

This review synthesizes the literature on CBPR with service providers to identify the benefits to, unique contributions of, and challenges experienced by professional service providers engaged in collaborative research. Service providers benefited by obtaining research-based knowledge to help the communities they serve, gaining research skills, professional relationships, professional development, and new programs. They contributed by informing research aims, designing interventions, conducting recruitment, informing overall study design, and dissemination. Challenges include time, resources, organizational factors, and disconnects between researchers and service providers. Policy and practice implications are explored.

Design and construction of a remote piloted flying wing. B.S. Thesis

NASA Technical Reports Server (NTRS)

Costa, Alfred J.; Koopman, Fritz; Soboleski, Craig; Trieu, Thai-Ba; Duquette, Jaime; Krause, Scott; Susko, David; Trieu, Thuyba

1994-01-01

Currently, there is a need for a high-speed, high-lift civilian transport. Although unconventional, a flying wing could fly at speeds in excess of Mach 2 and still retain the capacity of a 747. The design of the flying wing is inherently unstable since it lacks a fuselage and a horizontal tail. The project goal was to design, construct, fly, and test a remote-piloted scale model flying wing. The project was completed as part of the NASA/USRA Advanced Aeronautics Design Program. These unique restrictions required us to implement several fundamental design changes from last year's Elang configuration including wing sweepback and wingtip endplates. Unique features such as a single ducted fan engine, composite structural materials, and an electrostatic stability system were incorporated. The result is the Banshee '94. Our efforts will aid future projects in design and construction techniques so that a viable flying wing can become an integral part of the aviation industry.

NASA/USRA University Advanced Design Program Fifth Annual Summer Conference

NASA Technical Reports Server (NTRS)

1989-01-01

The NASA/USRA University Advanced Design Program is a unique program that brings together NASA engineers, students, and faculty from United States engineering schools by integrating current and future NASA space/aeronautics engineering design projects into the university curriculum. The Program was conceived in the fall of 1984 as a pilot project to foster engineering design education in the universities and to supplement NASA's in-house efforts in advanced planning for space and aeronautics design. Nine universities and five NASA centers participated in the first year of the pilot project. Close cooperation between the NASA centers and the universities, the careful selection of design topics, and the enthusiasm of the students has resulted in a very successful program than now includes forty universities and eight NASA centers. The study topics cover a broad range of potential space and aeronautics projects.

Hidden in Plain Sight: A Crowdsourced Public Art Contest to Make Automated External Defibrillators More Visible

PubMed Central

Griffis, Heather M.; Kilaru, Austin S.; Sellers, Allison M.; Hershey, John C.; Hill, Shawndra S.; Kramer-Golinkoff, Emily; Nadkarni, Lindsay; Debski, Margaret M.; Padrez, Kevin A.; Becker, Lance B.; Asch, David A.

2014-01-01

Objectives. We sought to explore the feasibility of using a crowdsourcing study to promote awareness about automated external defibrillators (AEDs) and their locations. Methods. The Defibrillator Design Challenge was an online initiative that asked the public to create educational designs that would enhance AED visibility, which took place over 8 weeks, from February 6, 2014, to April 6, 2014. Participants were encouraged to vote for AED designs and share designs on social media for points. Using a mixed-methods study design, we measured participant demographics and motivations, design characteristics, dissemination, and Web site engagement. Results. Over 8 weeks, there were 13 992 unique Web site visitors; 119 submitted designs and 2140 voted. The designs were shared 48 254 times on Facebook and Twitter. Most designers–voters reported that they participated to contribute to an important cause (44%) rather than to win money (0.8%). Design themes included: empowerment, location awareness, objects (e.g., wings, lightning, batteries, lifebuoys), and others. Conclusions. The Defibrillator Design Challenge engaged a broad audience to generate AED designs and foster awareness. This project provides a framework for using design and contest architecture to promote health messages. PMID:25320902

Investigating energy consumption of coastal vacation rental homes

NASA Astrophysics Data System (ADS)

Myers, Sam

In 2007, vacation rental properties in the United States accounted for more than 22% of the domestic lodging market. These properties are a unique segment of the lodging industry due to their residential design and commercial use. Coastal vacation rental properties represent the largest supply, demand and value of the nation's vacation rental supply. In the case of North Carolina's Outer Banks, tourism is the area's largest source of income, with vacation real estate agencies being the largest accommodation provider. This study uses a multiple regression analysis to investigate the energy consumption of 30 vacation rental homes on Hatteras Island. Hatteras Island's abundant supply of vacation rental homes provided a diverse sample to study energy consumption with a wide range of houses regarding size, age, and location. Since very little research has been conducted on the energy consumption of vacation rental homes, this study aims to contribute detailed information regarding the energy consumption of unique accommodation sector.

Fundamental Studies and Development of III-N Visible LEDs for High-Power Solid-State Lighting Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dupuis, Russell

The goal of this program is to understand in a fundamental way the impact of strain, defects, polarization, and Stokes loss in relation to unique device structures upon the internal quantum efficiency (IQE) and efficiency droop (ED) of III-nitride (III-N) light-emitting diodes (LEDs) and to employ this understanding in the design and growth of high-efficiency LEDs capable of highly-reliable, high-current, high-power operation. This knowledge will be the basis for our advanced device epitaxial designs that lead to improved device performance. The primary approach we will employ is to exploit new scientific and engineering knowledge generated through the application of amore » set of unique advanced growth and characterization tools to develop new concepts in strain-, polarization-, and carrier dynamics-engineered and low-defect materials and device designs having reduced dislocations and improved carrier collection followed by efficient photon generation. We studied the effects of crystalline defect, polarizations, hole transport, electron-spillover, electron blocking layer, underlying layer below the multiplequantum- well active region, and developed high-efficiency and efficiency-droop-mitigated blue LEDs with a new LED epitaxial structures. We believe new LEDs developed in this program will make a breakthrough in the development of high-efficiency high-power visible III-N LEDs from violet to green spectral region.« less

Rational design of an enzyme mutant for anti-cocaine therapeutics

NASA Astrophysics Data System (ADS)

Zheng, Fang; Zhan, Chang-Guo

2008-09-01

(-)-Cocaine is a widely abused drug and there is no available anti-cocaine therapeutic. The disastrous medical and social consequences of cocaine addiction have made the development of an effective pharmacological treatment a high priority. An ideal anti-cocaine medication would be to accelerate (-)-cocaine metabolism producing biologically inactive metabolites. The main metabolic pathway of cocaine in body is the hydrolysis at its benzoyl ester group. Reviewed in this article is the state-of-the-art computational design of high-activity mutants of human butyrylcholinesterase (BChE) against (-)-cocaine. The computational design of BChE mutants have been based on not only the structure of the enzyme, but also the detailed catalytic mechanisms for BChE-catalyzed hydrolysis of (-)-cocaine and (+)-cocaine. Computational studies of the detailed catalytic mechanisms and the structure-and-mechanism-based computational design have been carried out through the combined use of a variety of state-of-the-art techniques of molecular modeling. By using the computational insights into the catalytic mechanisms, a recently developed unique computational design strategy based on the simulation of the rate-determining transition state has been employed to design high-activity mutants of human BChE for hydrolysis of (-)-cocaine, leading to the exciting discovery of BChE mutants with a considerably improved catalytic efficiency against (-)-cocaine. One of the discovered BChE mutants (i.e., A199S/S287G/A328W/Y332G) has a ˜456-fold improved catalytic efficiency against (-)-cocaine. The encouraging outcome of the computational design and discovery effort demonstrates that the unique computational design approach based on the transition-state simulation is promising for rational enzyme redesign and drug discovery.

Building an Accelerated Online Graduate Program for Military Officers

ERIC Educational Resources Information Center

Collins, Royce Ann; Kang, Haijun; Biniecki, Susan Yelich; Favor, Judy

2015-01-01

Because of the intense and unique nature of their military life, military officers face stresses that other students do not need to be concerned about when taking courses online. An institution's ability to understand these military officer students, design online programs to meet their unique learning needs and deliver valuable online curricula…

SUMMARY OF TECNIQUES AND UNIQUE USES FOR DIRECT PUSH METHODS IN SITE CHARACTERIZATION ON CONTAMINATED FIELD SITES

EPA Science Inventory

At many of the sites where we have been asked to assist in site characterization, we have discovered severe discrepancies that new technologies may be able to prevent. This presentation is designed to illustrate these new technologies or unique uses of existing technology and the...

Designing Mission Operations for the Gravity Recovery and Interior Laboratory Mission

NASA Technical Reports Server (NTRS)

Havens, Glen G.; Beerer, Joseph G.

2012-01-01

NASA's Gravity Recovery and Interior Laboratory (GRAIL) mission, to understand the internal structure and thermal evolution of the Moon, offered unique challenges to mission operations. From launch through end of mission, the twin GRAIL orbiters had to be operated in parallel. The journey to the Moon and into the low science orbit involved numerous maneuvers, planned on tight timelines, to ultimately place the orbiters into the required formation-flying configuration necessary. The baseline GRAIL mission is short, only 9 months in duration, but progressed quickly through seven very unique mission phases. Compressed into this short mission timeline, operations activities and maneuvers for both orbiters had to be planned and coordinated carefully. To prepare for these challenges, development of the GRAIL Mission Operations System began in 2008. Based on high heritage multi-mission operations developed by NASA's Jet Propulsion Laboratory and Lockheed Martin, the GRAIL mission operations system was adapted to meet the unique challenges posed by the GRAIL mission design. This paper describes GRAIL's system engineering development process for defining GRAIL's operations scenarios and generating requirements, tracing the evolution from operations concept through final design, implementation, and validation.

Method for Constructing Composite Response Surfaces by Combining Neural Networks with other Interpolation or Estimation Techniques

NASA Technical Reports Server (NTRS)

Rai, Man Mohan (Inventor); Madavan, Nateri K. (Inventor)

2003-01-01

A method and system for design optimization that incorporates the advantages of both traditional response surface methodology (RSM) and neural networks is disclosed. The present invention employs a unique strategy called parameter-based partitioning of the given design space. In the design procedure, a sequence of composite response surfaces based on both neural networks and polynomial fits is used to traverse the design space to identify an optimal solution. The composite response surface has both the power of neural networks and the economy of low-order polynomials (in terms of the number of simulations needed and the network training requirements). The present invention handles design problems with many more parameters than would be possible using neural networks alone and permits a designer to rapidly perform a variety of trade-off studies before arriving at the final design.

Work boot design affects the way workers walk: A systematic review of the literature.

PubMed

Dobson, Jessica A; Riddiford-Harland, Diane L; Bell, Alison F; Steele, Julie R

2017-05-01

Safety boots are compulsory in many occupations to protect the feet of workers from undesirable external stimuli, particularly in harsh work environments. The unique environmental conditions and varying tasks performed in different occupations necessitate a variety of boot designs to match each worker's occupational safety and functional requirements. Unfortunately, safety boots are often designed more for occupational safety at the expense of functionality and comfort. In fact, there is a paucity of published research investigating the influence that specific variations in work boot design have on fundamental tasks common to many occupations, such as walking. This literature review aimed to collate and examine what is currently known about the influence of boot design on walking in order to identify gaps in the literature and develop evidence-based recommendations upon which to design future research studies investigating work boot design. Copyright © 2017 Elsevier Ltd. All rights reserved.

MIDAS Website. Revised

NASA Technical Reports Server (NTRS)

Goodman, Allen; Shively, R. Joy (Technical Monitor)

1997-01-01

MIDAS, Man-machine Integration Design and Analysis System, is a unique combination of software tools aimed at reducing design cycle time, supporting quantitative predictions of human-system effectiveness and improving the design of crew stations and their associated operating procedures. This project is supported jointly by the US Army and NASA.

Design and Evaluation of the NFL PLAY 60 FITNESSGRAM® Partnership Project

ERIC Educational Resources Information Center

Welk, Gregory J.; Bai, Yang; Saint-Maurice, Pedro F.; Allums-Featherston, Kelly; Candelaria, Norma

2016-01-01

This article describes the conceptual design and evaluation strategies used in the NFL PLAY 60 FITNESSGRAM® Partnership Project, a large participatory research network focused on building effective school physical education programming. The article summarizes the unique participatory design, recruitment methods, programming strategies, and…

Dopamine Modulates Option Generation for Behavior.

PubMed

Ang, Yuen-Siang; Manohar, Sanjay; Plant, Olivia; Kienast, Annika; Le Heron, Campbell; Muhammed, Kinan; Hu, Michele; Husain, Masud

2018-05-21

Animals make innumerable decisions every day, each of which involves evaluating potential options for action. But how are options generated? Although much is now known about decision making when a fixed set of potential options is provided, surprisingly little progress has been made on self-generated options. Some researchers have proposed that such abilities might be modulated by dopamine. Here, we used a new measure of option generation that is quantitative, objective, and culture fair to investigate how humans generate different behavioral options. Participants were asked to draw as many different paths (options) as they could between two points within a fixed time. Healthy individuals (n = 96) exhibited a trade-off between uniqueness (how individually different their options were) and fluency (number of options), generating either many similar or few unique options. To assess influence of dopamine, we first examined patients with Parkinson's disease (n = 35) ON and OFF their dopaminergic medication and compared them to elderly healthy controls (n = 34). Then we conducted a double-blind, placebo-controlled crossover study of the D2 agonist cabergoline in healthy older people (n = 29). Across both studies, dopamine increased fluency but diminished overall uniqueness of options generated, due to the effect of fluency trading off with uniqueness. Crucially, however, when this trade-off was corrected for, dopamine was found to increase uniqueness for any given fluency. Three carefully designed control studies showed that performance on our option-generation task was not related to executing movements, planning actions, or selecting between generated options. These findings show that dopamine plays an important role in modulating option generation. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Application of Design Patterns in Refactoring Software Design

NASA Technical Reports Server (NTRS)

Baggs. Rjpda; Shaykhian, Gholam Ali

2007-01-01

Refactoring software design is a method of changing software design while explicitly preserving its unique design functionalities. Presented approach is to utilize design patterns as the basis for refactoring software design. Comparison of a design solution will be made through C++ programming language examples to exploit this approach. Developing reusable component will be discussed, the paper presents that the construction of such components can diminish the added burden of both refactoring and the use of design patterns.

Apply Design Patterns to Refactor Software Design

NASA Technical Reports Server (NTRS)

Baggs, Rhoda; Shaykhian, Gholam Ali

2007-01-01

Refactoring software design is a method of changing software design while explicitly preserving its unique design functionalities. Presented approach is to utilize design patterns as the basis for refactoring software design. Comparison of a design solution will be made through C++ programming language examples to exploit this approach. Developing reusable component will be discussed, the paper presents that the construction of such components can diminish the added burden of both refactoring and the use of design patterns.

Development of loop-mediated isothermal amplification with Plasmodium falciparum unique genes for molecular diagnosis of human malaria.

PubMed

Zhang, Yijing; Yao, Yi; Du, Weixing; Wu, Kai; Xu, Wenyue; Lin, Min; Tan, Huabing; Li, Jian

2017-07-01

In order to achieve better outcomes for treatment and in the prophylaxis of malaria, it is imperative to develop a sensitive, specific, and accurate assay for early diagnosis of Plasmodium falciparum infection, which is the major cause of malaria. In this study, we aimed to develop a loop-mediated isothermal amplification (LAMP) assay with P. falciparum unique genes for sensitive, specific, and accurate detection of P. falciparum infection. The unique genes of P. falciparum were randomly selected from PlasmoDB. The LAMP primers of the unique genes were designed using PrimerExplorer V4. LAMP assays with primers from unique genes of P. falciparum and conserved 18S rRNA gene were developed and their sensitivity was assessed. The specificity of the most sensitive LAMP assay was further examined using genomic DNA from Plasmodium vivax, Plasmodium yoelii and Toxoplasma gondii. Finally, the unique gene-based LAMP assay was validated using clinical samples of P. falciparum infection cases. A total of 31 sets of top-scored LAMP primers from nine unique genes were selected from the pools of designed primers. The LAMP assay with PF3D7_1253300-5 was the most sensitive with the detection limit 5 parasites/μl, and it displayed negative LAMP assay with the genomic DNA samples of P. vivax, P. yoelii, and T. gondii. The LAMP assay with PF3D7_0112300 (18S rRNA) was less sensitive with the detection limit 50 parasites/μl, and it displayed negative LAMP assay with the genomic DNA samples of P. yoelii and T. gondii, but displayed positive LAMP detection with P. vivax. The positive detection rate of the LAMP assay with PF3D7_1253300-5 was 90% (27/30), higher than that (80%, 24/30) of the positive rate of PF3D7_0112300 (18S rRNA) in examining clinical samples of P. falciparum infection cases. The LAMP assay with the primer set PF3D7_1253300-5 was more sensitive, specific, and accurate than those with PF3D7_0112300 (18S rRNA) in examining P. falciparum infection, and therefore it is a promising tool for diagnosis of P. falciparum infection.

Improving Women's Sexual Health: A Quantitative Evaluation of an Educational Intervention for Healthcare Professionals

ERIC Educational Resources Information Center

Blair, Britney; Arnow, B. A.; Haas, Amie; Millheiser, Leah

2013-01-01

Forty-three per cent of women in the USA report some type of sexual complaint and these complaints have been shown to negatively impact quality of life and overall well-being. With proper training and experience, healthcare professionals are in a unique position to help their patients improve their sexual health. The present study was designed to…

Evaluation of a Web-Based Training in Smoking Cessation Counseling Targeting U.S. Eye-Care Professionals

ERIC Educational Resources Information Center

Asfar, Taghrid; Lee, David J.; Lam, Byron L.; Murchison, Ann P.; Mayro, Eileen L.; Owsley, Cynthia; McGwin, Gerald; Gower, Emily W.; Friedman, David S.; Saaddine, Jinan

2018-01-01

Background: Smoking causes blindness-related diseases. Eye-care providers are uniquely positioned to help their patients quit smoking. Aims: Using a pre-/postevaluation design, this study evaluated a web-based training in smoking cessation counseling targeting eye-care providers. Method: The training was developed based on the 3A1R protocol:…

Silent Partners: Uncovering Middle School and High School Students' Perceptions of Their Roles in Two School-University Partnerships

ERIC Educational Resources Information Center

Kruse, Nathan B.

2012-01-01

The purpose of this study was to explore middle school and high school band students' perceptions of two ongoing school-university partnerships. Interviews and focus group interviews were conducted with school students to capture their unique perspectives and to support the tenets of formative and action research designs. Findings indicated that…

A Professional Development Program for Dental Medical Educators in Kuwait: Needs Assessment, Program Design and Formative Evaluation

ERIC Educational Resources Information Center

Alyaseen, Haneen

2017-01-01

New innovative methods of teaching and learning adopted from mainstream research and development in educational theory and practice are being adapted to serve the unique needs of the medical professions. The success of these methods requires careful planning and establishment of faculty development programs. The purpose of this study is to perform…

New Tools for Learning: A Case of Organizational Problem Analysis Derived from Debriefing Records in a Medical Center

ERIC Educational Resources Information Center

Holzmann, Vered; Mischari, Shoshana; Goldberg, Shoshana; Ziv, Amitai

2012-01-01

Purpose: This article aims to present a unique systematic and validated method for creating a linkage between past experiences and management of future occurrences in an organization. Design/methodology/approach: The study is based on actual data accumulated in a series of projects performed in a major medical center. Qualitative and quantitative…

A Bridge Too Far or a Bridge to the Future? A Case Study in Online Assessment at Charles Sturt University

ERIC Educational Resources Information Center

Buchan, Janet F.; Swann, Michael

2007-01-01

The in house development of an online assessment tool, OASIS, has provided a unique opportunity to research the use of online assessment in teaching and learning across the university. The developing relationship between IT staff, educational designers and academics serves as a model for integrated and evolving management systems which demonstrate…

Cultivating the Cream of the Crop: A Case Study of Urban Teachers from an Alternative Teacher Education Program

ERIC Educational Resources Information Center

Ng, Jennifer; Thomas, Kelli

2007-01-01

Hard-to-staff urban school districts increasingly rely on teachers who are certified through alternative routes to staff their classrooms. Given the accelerated design of alternative certification as well as the unique nature of schools in urban contexts, the process by which these individuals become effective teachers is essential to understand.…

A Comprehensive Approach in Developing "akhlaq": A Case Study on the Implementation of Character Education at Pondok Pesantren Darunnajah

ERIC Educational Resources Information Center

Izfanna, Duna; Hisyam, Nik Ahmad

2012-01-01

Purpose: The purpose of this paper is to describe how a unique Islamic education system, named Pondok Pesantren, implemented and contributed substantially to the character education of its students. Design/methodology/approach: In total, 12 teachers and 24 students of Pondok Pesantren Darunnajah, Indonesia were interviewed, participated in focus…

The Interface of Creativity, Fluency, Lateral Thinking, and Technology While Designing Serious Educational Games in a Science Classroom

ERIC Educational Resources Information Center

Lamb, Richard; Annetta, Leonard; Vallett, David

2015-01-01

Introduction: Creativity is the production of the new, original, unique, and divergent products and ideas mediated through lateral thinking. Evidence suggests that high levels of creativity and fluency are important in the continued development of student interest, efficacy and ultimately career impact in the sciences. Method: In this study, 559…

Artful Stories: The Teacher, the Student, and the Muse. Black Studies and Critical Thinking. Volume 22

ERIC Educational Resources Information Center

Dowdy, Joanne Kilgour

2012-01-01

These are the stories of four arts practitioners from Trinidad and Tobago--a lighting designer, a dancer, a jazz musician and a choreographer--who have made names for themselves internationally. The book centers on their role as educators in their fields; their unique and individual journeys exemplify the classic role artists have (always) played…

Hearing Parents' Appraisals of Parenting a Deaf or Hard-of-Hearing Child: Application of a Positive Psychology Framework

ERIC Educational Resources Information Center

Szarkowski, Amy; Brice, Patrick J.

2016-01-01

Hearing parents of deaf and hard-of-hearing children face unique challenges and stressors, the understanding of which has been the focus of numerous studies; yet, relatively little is known about their positive experiences. Using a qualitative purposive sampling design, interviews were conducted with 11 hearing parents (8 mothers, 3 fathers)…

Quality Child Care for Infants and Toddlers: Case Studies of Three Community Strategies. Final Report.

ERIC Educational Resources Information Center

Paulsell, Diane; Nogales, Renee; Cohen, Julie

To address the increasing child care needs of low-income families in the wake of welfare reform, federal and state governments have responded with increased funding for child care and for initiatives to improve quality. Some of these initiatives have been designed specifically to address the unique challenges of infant-toddler care. This report…

An Evaluation of the Impact of 1:1 Laptops on Student Attainment in Senior High School Sciences

ERIC Educational Resources Information Center

Crook, Simon J.; Sharma, Manjula D.; Wilson, Rachel

2015-01-01

Our study capitalized on a unique natural experiment rather than a researcher-designed, randomized experiment whereby, thanks to the Australian Government's Digital Education Revolution, half of grade 9 students in 2008 received laptops and half did not. Consequently in late 2011, when these students sat for their grade 12 external examinations…

Beyond No Means No: Outcomes of an Intensive Program To Train Peer Facilitators for Campus Acquaintance Rape Education.

ERIC Educational Resources Information Center

Lonsway, Kimberly A.; Klaw, Elena L.; Berg, Dianne R.; Waldo, Craig R.; Kothari, Chevon; Mazurek, Christopher J.; Hegeman, Kurt E.

As part of a larger multimethod evaluation, the present study examined the effects of a uniquely intensive rape education program. Participants included 74 undergraduates (53 women and 21 men) enrolled in Campus Acquaintance Rape Education (CARE), a semester-long university course designed to train peer facilitators to conduct rape education…

Impact of Accreditation Actions: A Case Study of Two Colleges within Western Association of Schools and Colleges' Accrediting Commission for Community and Junior Colleges

ERIC Educational Resources Information Center

Patel, Dipte D.

2012-01-01

The United States is unique with it non-governmental peer-review based accreditation system for oversight of higher education for quality assurance and improvement. In a triad relationship with federal and state governments for accountability, accreditation associations are the designated gatekeeper for federal financial assistance. Therefore,…

More Technology, Better Learning Resources, Better Learning? Lessons from Adopting Virtual Microscopy in Undergraduate Medical Education

ERIC Educational Resources Information Center

Helle, Laura; Nivala, Markus; Kronqvist, Pauliina

2013-01-01

The adoption of virtual microscopy at the University of Turku, Finland, created a unique real-world laboratory for exploring ways of reforming the learning environment. The purpose of this study was to evaluate the students' reactions and the impact of a set of measures designed to boost an experimental group's understanding of abnormal histology…

Designing and Implementing a Unique Website Design Project in an Undergraduate Course

ERIC Educational Resources Information Center

Kontos, George

2016-01-01

The following paper describes a distinctive collaborative service-learning project done in an undergraduate class on web design. In this project, students in a web design class contacted local community non-profit organizations to create websites (collections of web pages) to benefit these organizations. The two phases of creating a website,…

46 CFR 188.15-5 - Design of vessels.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Design of vessels. 188.15-5 Section 188.15-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Equivalents § 188.15-5 Design of vessels. (a) In order not to inhibit design and application the Commandant may accept vessels of unusual, uniqu...

46 CFR 188.15-5 - Design of vessels.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Design of vessels. 188.15-5 Section 188.15-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Equivalents § 188.15-5 Design of vessels. (a) In order not to inhibit design and application the Commandant may accept vessels of unusual, uniqu...

46 CFR 188.15-5 - Design of vessels.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Design of vessels. 188.15-5 Section 188.15-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Equivalents § 188.15-5 Design of vessels. (a) In order not to inhibit design and application the Commandant may accept vessels of unusual, uniqu...

Life Support Systems for Lunar Landers

NASA Technical Reports Server (NTRS)

Anderson, Molly

2008-01-01

Engineers designing life support systems for NASA s next Lunar Landers face unique challenges. As with any vehicle that enables human spaceflight, the needs of the crew drive most of the lander requirements. The lander is also a key element of the architecture NASA will implement in the Constellation program. Many requirements, constraints, or optimization goals will be driven by interfaces with other projects, like the Crew Exploration Vehicle, the Lunar Surface Systems, and the Extravehicular Activity project. Other challenges in the life support system will be driven by the unique location of the vehicle in the environments encountered throughout the mission. This paper examines several topics that may be major design drivers for the lunar lander life support system. There are several functional requirements for the lander that may be different from previous vehicles or programs and recent experience. Some of the requirements or design drivers will change depending on the overall Lander configuration. While the configuration for a lander design is not fixed, designers can examine how these issues would impact their design and be prepared for the quick design iterations required to optimize a spacecraft.

Revision of a Fractured Uncemented Revision Stem Using a Custom Designed Punch and Retrograde Through-Knee Approach

PubMed Central

Nasr, P. J.; Keene, G. S.

2015-01-01

We report a unique case of a fractured modular cobalt chromium connection taper Revitan (Zimmer, Warsaw, IN) revision prosthesis. Macroscopic examination revealed a fracture at the diaphyseal-metaphyseal junction of this modular component. This report highlights that fractures can still occur with modern modular prostheses. We are not aware of any published failures of the Revitan revision prosthesis. We also describe a unique method of retrieval for a broken well fixed uncemented femoral stem, using a custom designed extraction instrument via a through-knee approach. PMID:25793134

Materials and fractal designs for 3D multifunctional integumentary membranes with capabilities in cardiac electrotherapy.

PubMed

Xu, Lizhi; Gutbrod, Sarah R; Ma, Yinji; Petrossians, Artin; Liu, Yuhao; Webb, R Chad; Fan, Jonathan A; Yang, Zijian; Xu, Renxiao; Whalen, John J; Weiland, James D; Huang, Yonggang; Efimov, Igor R; Rogers, John A

2015-03-11

Advanced materials and fractal design concepts form the basis of a 3D conformal electronic platform with unique capabilities in cardiac electrotherapies. Fractal geometries, advanced electrode materials, and thin, elastomeric membranes yield a class of device capable of integration with the entire 3D surface of the heart, with unique operational capabilities in low power defibrillation. Co-integrated collections of sensors allow simultaneous monitoring of physiological responses. Animal experiments on Langendorff-perfused rabbit hearts demonstrate the key features of these systems. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Parental Expressivity and Parenting Styles in Chinese Families: Prospective and Unique Relations to Children's Psychological Adjustment.

PubMed

Chen, Stephen H; Zhou, Qing; Eisenberg, Nancy; Valiente, Carlos; Wang, Yun

2011-01-01

OBJECTIVES: Parents from different cultures differ in how frequently they express emotions. However, the generalizability of the relations between parental expressivity and child adjustment in non-Western cultures has not been extensively studied. The goal of the present study was to investigate prospective relations between parental expressivity within the family (positive, negative dominant, and negative submissive expressivity) and Chinese children's psychological adjustment, above and beyond parenting styles. DESIGN: The study used two waves (3.8 years apart) of longitudinal data from a sample (n= 425) of children in Beijing (mean ages = 7.7 years at T1 and 11.6 years at T2). Parental expressivity and parenting styles were self-reported. To reduce the potential measurement overlap, items that tap parental expression of emotions toward the child were removed from the parenting style measure. Children's adjustment was measured with parents', teachers', and peers' or children's reports. RESULTS: Consistent with findings with European American samples, parental negative dominant expressivity uniquely and positively predicted Chinese children's externalizing problems controlling for prior externalizing problems, parenting styles, and family SES. Neither parental expressivity nor parenting styles uniquely predicted social competence. CONCLUSIONS: Despite previously reported cultural differences in the mean levels of parental expressivity, some of the socialization functions of parental expressivity found in Western countries can be generalized to Chinese families. Although parental expressivity and parenting styles are related constructs, their unique relations to child's adjustment suggest that they should be examined as distinct processes.

On the Materials Science of Nature's Arms Race.

PubMed

Liu, Zengqian; Zhang, Zhefeng; Ritchie, Robert O

2018-06-05

Biological material systems have evolved unique combinations of mechanical properties to fulfill their specific function through a series of ingenious designs. Seeking lessons from Nature by replicating the underlying principles of such biological materials offers new promise for creating unique combinations of properties in man-made systems. One case in point is Nature's means of attack and defense. During the long-term evolutionary "arms race," naturally evolved weapons have achieved exceptional mechanical efficiency with a synergy of effective offense and persistence-two characteristics that often tend to be mutually exclusive in many synthetic systems-which may present a notable source of new materials science knowledge and inspiration. This review categorizes Nature's weapons into ten distinct groups, and discusses the unique structural and mechanical designs of each group by taking representative systems as examples. The approach described is to extract the common principles underlying such designs that could be translated into man-made materials. Further, recent advances in replicating the design principles of natural weapons at differing lengthscales in artificial materials, devices and tools to tackle practical problems are revisited, and the challenges associated with biological and bioinspired materials research in terms of both processing and properties are discussed. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Working Notes from the 1992 AAAI Workshop on Automating Software Design. Theme: Domain Specific Software Design

NASA Technical Reports Server (NTRS)

Keller, Richard M. (Editor); Barstow, David; Lowry, Michael R.; Tong, Christopher H.

1992-01-01

The goal of this workshop is to identify different architectural approaches to building domain-specific software design systems and to explore issues unique to domain-specific (vs. general-purpose) software design. Some general issues that cut across the particular software design domain include: (1) knowledge representation, acquisition, and maintenance; (2) specialized software design techniques; and (3) user interaction and user interface.

The conception, birth, and growth of a missile umbilical system

NASA Technical Reports Server (NTRS)

Nordman, G. W.

1977-01-01

The design development of the Sprint 2 and the Improved Sprint 2 Missile System umbilical system is reviewed. Unique system requirements, umbilical designs considered to meet the requirements, and the problems encountered and solutions derived during the design and development testing of the selected systems are described.

A 2385 MHz, 2-stage low noise amplifier design

NASA Technical Reports Server (NTRS)

Sifri, Jack D.

1986-01-01

This article shows the design aspects of a 2.385 GHz low noise preamplifier with a .7 dB noise figure and 16.5 dB gain using the NE 67383 FET. The design uses a unique method in matching the input which achieves optimum noise figure and unconditional stability.

Place-Based Learning: Interactive Learning and Net-Zero Design

ERIC Educational Resources Information Center

Holser, Alec; Becker, Michael

2011-01-01

Food and conservation science curriculum, net-zero design and student-based building performance monitoring have come together in the unique and innovative new Music and Science Building for Oregon's Hood River Middle School. The school's Permaculture-based curriculum both informed the building design and was also transformed through the…

Spreadsheet Design: An Optimal Checklist for Accountants

ERIC Educational Resources Information Center

Barnes, Jeffrey N.; Tufte, David; Christensen, David

2009-01-01

Just as good grammar, punctuation, style, and content organization are important to well-written documents, basic fundamentals of spreadsheet design are essential to clear communication. In fact, the very principles of good writing should be integrated into spreadsheet workpaper design and organization. The unique contributions of this paper are…

SOCIAL PSYCHOLOGICAL ASPECTS OF SCHOOL BUILDING DESIGN.

ERIC Educational Resources Information Center

KEITH, PAT M.; SMITH, LOUIS M.

THE DEVELOPMENT AND INTEGRATION OF SOCIOPSYCHOLOGICAL ASPECTS OF SCHOOL DESIGN WERE INVESTIGATED BY FOCUSING ON THE IMPACT OF A UNIQUELY DESIGNED ELEMENTARY SCHOOL BUILDING, THE KENSINGTON SCHOOL. AN ATTEMPT WAS MADE TO SYNTHESIZE ROLE THEORY, DECISION MAKING THEORY, SOCIAL SYSTEM THEORY, AND SUCH PROBLEM AREAS AS STAFF PEER GROUPS, EDUCATIONAL…

How to Design a Genetic Mating Scheme: A Basic Training Package for Drosophila Genetics

PubMed Central

Roote, John; Prokop, Andreas

2013-01-01

Drosophila melanogaster is a powerful model organism for biological research. The essential and common instrument of fly research is genetics, the art of applying Mendelian rules in the specific context of Drosophila with its unique classical genetic tools and the breadth of modern genetic tools and strategies brought in by molecular biology, transgenic technologies and the use of recombinases. Training newcomers to fly genetics is a complex and time-consuming task but too important to be left to chance. Surprisingly, suitable training resources for beginners currently are not available. Here we provide a training package for basic Drosophila genetics, designed to ensure that basic knowledge on all key areas is covered while reducing the time invested by trainers. First, a manual introduces to fly history, rationale for mating schemes, fly handling, Mendelian rules in fly, markers and balancers, mating scheme design, and transgenic technologies. Its self-study is followed by a practical training session on gender and marker selection, introducing real flies under the dissecting microscope. Next, through self-study of a PowerPoint presentation, trainees are guided step-by-step through a mating scheme. Finally, to consolidate knowledge, trainees are asked to design similar mating schemes reflecting routine tasks in a fly laboratory. This exercise requires individual feedback but also provides unique opportunities for trainers to spot weaknesses and strengths of each trainee and take remedial action. This training package is being successfully applied at the Manchester fly facility and may serve as a model for further training resources covering other aspects of fly research. PMID:23390611

Optical and Calorimetric Studies of Cholesterol-Rich Filamentous, Helical Ribbon and Crystal Microstructures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miroshnikova, Y. A.; Elsenbeck, M.; Zastavker, Y. V.

2009-04-19

Formation of biological self-assemblies at all scales is a focus of studies in fields ranging from biology to physics to biomimetics. Understanding the physico-chemical properties of these self-assemblies may lead to the design of bio-inspired structures and technological applications. Here we examine self-assembled filamentous, helical ribbon, and crystal microstructures formed in chemically defined lipid concentrate (CDLC), a model system for cholesterol crystallization in gallbladder bile. CDLC consists of cholesterol, bilayer-forming amphiphiles, micelle-forming amphiphiles, and water. Phase contrast and differential interference contrast (DIC) microscopy indicate the presence of three microstructure types in all samples studied, and allow for an investigation ofmore » the structures' unique geometries. Additionally, confocal microscopy is used for qualitative assessment of surface and internal composition. To complement optical observations, calorimetric (differential-scanning and modulation) experiments, provide the basis for an in-depth understanding of collective and individual thermal behavior. Observed ''transition'' features indicate clustering and ''straightening'' of helical ribbons into short, increasingly thickening, filaments that dissolve with increasing temperature. These results suggest that all microstructures formed in CDLC may coexist in a metastable chemical equilibrium. Further investigation of the CDLC thermal profile should uncover the process of cholesterol crystallization as well as the unique design and function of microstructures formed in this system.« less

Recent Experiences and Challenges of Military Physiotherapists Deployed to Afghanistan: A Qualitative Study

PubMed Central

Carpenter, Christine

2011-01-01

ABSTRACT Purpose: Military physiotherapists in the Canadian Forces meet the unique rehabilitation needs of military personnel. Recently, the physiotherapy officer role has evolved in response to the Canadian Forces' involvement in the combat theatre of operations of Afghanistan, and this has created new and unique challenges and demands. The purpose of this study was to describe the experiences and challenges of military physiotherapists deployed to Afghanistan. Methods: A qualitative research design guided by descriptive phenomenology involved recruitment of key informants and in-depth interviews as the data collection method. The interviews were transcribed verbatim and the data analyzed using a foundational thematic analysis approach. Strategies of peer review and member checking were incorporated into the study design. Results: Six military physiotherapists were interviewed. They described rewarding experiences that were stressful yet highly career-satisfying. Main challenges revolved around heavy workloads, an expanded scope of practice as sole-charge practitioners, and the consequences and criticality of their clinical decisions. Conclusions: Our findings suggest that enhanced pre-deployment training and the implementation of a stronger support network will improve the capabilities of military physiotherapists deployed to difficult theatres of operations. This type of systematic and comprehensive research is needed to assist the Canadian Forces in proactively preparing and supporting physiotherapists deployed on future missions. PMID:22942524

Alcohol Use History and Panic-Relevant Responding among Adolescents: A Test using a Voluntary Hyperventilation Challenge

PubMed Central

Blumenthal, Heidemarie; Leen-Feldner, Ellen W.; Knapp, Ashley A.; Bunaciu, Liviu; Zamboanga, Byron L.

2012-01-01

Given the onset of alcohol use, neurological sensitivity, and enhanced panic-relevant vulnerability, adolescence is a key period in which to study the documented linkage between alcohol and panic-related problems. The current study was designed to build upon and uniquely extend extant work via (1) utilization of well-established experimental psychopathology techniques, and (2) evaluation of unique associations between alcohol use and panic symptoms after controlling for theoretically-relevant behavioral, environmental, and individual difference variables (i.e., age, gender, negative affectivity, anxiety sensitivity, child and parent tobacco use, and parental panic disorder). Participants were 111 community-recruited adolescents ages 12–17 years (M = 15.76 years; n = 50 girls). Youth completed a battery of well-established questionnaires and a voluntary hyperventilation challenge, and parents present at the laboratory completed a structured clinical interview. Adolescent alcohol use was categorized as Non-Users, Experimenters, or Users. Panic symptoms were indexed via retrospective self-report and adolescents’ response to a biological challenge procedure (i.e., voluntary hyperventilation). After controlling for theoretically-relevant covariates, Users evidenced elevated panic-relevant symptoms and responding compared to Non-Users; Experimenters did not differ from Non-Users. Findings suggest alcohol use history is uniquely associated with panic symptomatology among youth, including “real-time” reactivity elicited by a laboratory challenge. While there is significant work yet to be done, these data advance extant work and lay the groundwork for the types of sophisticated designs that will be needed to answer the most pressing and complex questions regarding the link between alcohol use and panic symptoms among adolescents. PMID:22369219

Acoustic and Laser Doppler Anemometer Results for Confluent, 22-Lobed, and Unique-Lobed Mixer Exhaust Systems for Subsonic Jet Noise Reduction

NASA Technical Reports Server (NTRS)

Salikuddin, M.; Martens, S.; Shin, H.; Majjigi, R. K.; Krejsa, Gene (Technical Monitor)

2002-01-01

The objective of this task was to develop a design methodology and noise reduction concepts for high bypass exhaust systems which could be applied to both existing production and new advanced engine designs. Special emphasis was given to engine cycles with bypass ratios in the range of 4:1 to 7:1, where jet mixing noise was a primary noise source at full power takeoff conditions. The goal of this effort was to develop the design methodology for mixed-flow exhaust systems and other novel noise reduction concepts that would yield 3 EPNdB noise reduction relative to 1992 baseline technology. Two multi-lobed mixers, a 22-lobed axisymmetric and a 21-lobed with a unique lobe, were designed. These mixers along with a confluent mixer were tested with several fan nozzles of different lengths with and without acoustic treatment in GEAE's Cell 41 under the current subtask (Subtask C). In addition to the acoustic and LDA tests for the model mixer exhaust systems, a semi-empirical noise prediction method for mixer exhaust system is developed. Effort was also made to implement flowfield data for noise prediction by utilizing MGB code. In general, this study established an aero and acoustic diagnostic database to calibrate and refine current aero and acoustic prediction tools.

Orion Entry, Descent, and Landing Simulation

NASA Technical Reports Server (NTRS)

Hoelscher, Brian R.

2007-01-01

The Orion Entry, Descent, and Landing simulation was created over the past two years to serve as the primary Crew Exploration Vehicle guidance, navigation, and control (GN&C) design and analysis tool at the National Aeronautics and Space Administration (NASA). The Advanced NASA Technology Architecture for Exploration Studies (ANTARES) simulation is a six degree-of-freedom tool with a unique design architecture which has a high level of flexibility. This paper describes the decision history and motivations that guided the creation of this simulation tool. The capabilities of the models within ANTARES are presented in detail. Special attention is given to features of the highly flexible GN&C architecture and the details of the implemented GN&C algorithms. ANTARES provides a foundation simulation for the Orion Project that has already been successfully used for requirements analysis, system definition analysis, and preliminary GN&C design analysis. ANTARES will find useful application in engineering analysis, mission operations, crew training, avionics-in-the-loop testing, etc. This paper focuses on the entry simulation aspect of ANTARES, which is part of a bigger simulation package supporting the entire mission profile of the Orion vehicle. The unique aspects of entry GN&C design are covered, including how the simulation is being used for Monte Carlo dispersion analysis and for support of linear stability analysis. Sample simulation output from ANTARES is presented in an appendix.

Explosive Welding in the 1990's

NASA Technical Reports Server (NTRS)

Lalwaney, N. S.; Linse, V. D.

1985-01-01

Explosive bonding is a unique joining process with the serious potential to produce composite materials capable of fulfilling many of the high performance materials capable of fulfilling many of the high performance materials needs of the 1990's. The process has the technological versatility to provide a true high quality metallurgical compatible and incompatible systems. Metals routinely explosively bonded include a wide variety of combinations of reactive and refractory metals, low and high density metals and their alloys, corrosion resistant and high strength alloys, and common steels. The major advantage of the process is its ability to custom design and engineer composites with physical and/or mechanical properties that meet a specific or unusual performance requirement. Explosive bonding offers the designer unique opportunities in materials selection with unique combinations of properties and high integrity bonds that cannot be achieved by any other metal joining process. The process and some applications are discussed.

Design of a video teleconference facility for a synchronous satellite communications link

NASA Technical Reports Server (NTRS)

Richardson, M. D.

1979-01-01

The system requirements, design tradeoffs, and final design of a video teleconference facility are discussed, including proper lighting, graphics transmission, and picture aesthetics. Methods currently accepted in the television broadcast industry are used in the design. The unique problems associated with using an audio channel with a synchronous satellite communications link are discussed, and a final audio system design is presented.

Value of the small cohort study including a physical examination for minor structural defects in identifying new human teratogens.

PubMed

Chambers, Christina D

2011-03-01

Most known human teratogens are associated with a unique or characteristic pattern of major and minor malformations and this pattern helps to establish the causal link between the teratogenic exposure and the outcome. Although traditional case-control and cohort study designs can help identify potential teratogens, there is an important role for small cohort studies that include a dysmorphological examination of exposed and unexposed infants for minor structural defects. In combination with other study design approaches, the small cohort study with a specialized physical examination fulfills a necessary function in screening for new potential teratogens and can help to better delineate the spectrum and magnitude of risk for known teratogens. © 2011 The Author. Congenital Anomalies © 2011 Japanese Teratology Society.

HIV cure research community engagement in North Carolina: a mixed-methods evaluation of a crowdsourcing contest.

PubMed

Mathews, Allison; Farley, Samantha; Blumberg, Meredith; Knight, Kimberley; Hightow-Weidman, Lisa; Muessig, Kate; Rennie, Stuart; Tucker, Joseph

2017-10-01

The purpose of this study was to evaluate the feasibility of using a crowdsourcing contest to promote HIV cure research community engagement. Crowdsourcing contests are open calls for community participation to achieve a task, in this case to engage local communities about HIV cure research. Our contest solicited images and videos of what HIV cure meant to people. Contestants submitted entries to IdeaScale, an encrypted online contest platform. We used a mixed-methods study design to evaluate the contest. Engagement was assessed through attendance at promotional events and social media user analytics. Google Analytics measured contest website user-engagement statistics. Text from contest video entries was transcribed, coded and analysed using MAXQDA. There were 144 attendees at three promotional events and 32 entries from 39 contestants. Most individuals who submitted entries were black ( n =31), had some college education ( n =18) and were aged 18-23 years ( n =23). Social media analytics showed 684 unique page followers, 2233 unique page visits, 585 unique video views and an overall reach of 80,624 unique users. Contest submissions covered themes related to the community's role in shaping the future of HIV cure through education, social justice, creativity and stigma reduction. Crowdsourcing contests are feasible for engaging community members in HIV cure research. Community contributions to crowdsourcing contests provide useful content for culturally relevant and locally responsive research engagement.

A biopolymer-like metal enabled hybrid material with exceptional mechanical prowess

DOE PAGES

Zhang, Junsong; Cui, Lishan; Jiang, Daqiang; ...

2015-02-10

In this study, the design principles for naturally occurring biological materials have inspired us to develop next-generation engineering materials with remarkable performance. Nacre, commonly referred to as nature's armor, is renowned for its unusual combination of strength and toughness. Nature's wisdom in nacre resides in its elaborate structural design and the judicious placement of a unique organic biopolymer with intelligent deformation features. However, up to now, it is still a challenge to transcribe the biopolymer's deformation attributes into a stronger substitute in the design of new materials. In this study, we propose a new design strategy that employs shape memorymore » alloy to transcribe the "J-curve'' mechanical response and uniform molecular/atomic level deformation of the organic biopolymer in the design of high-performance hybrid materials. This design strategy is verified in a TiNi-Ti 3Sn model material system. The model material demonstrates an exceptional combination of mechanical properties that are superior to other high-performance metal-based lamellar composites known to date. Our design strategy creates new opportunities for the development of high-performance bio-inspired materials.« less

Design, implementation, and extension of thermal invisibility cloaks

NASA Astrophysics Data System (ADS)

Zhang, Youming; Xu, Hongyi; Zhang, Baile

2015-05-01

A thermal invisibility cloak, as inspired by optical invisibility cloaks, is a device which can steer the conductive heat flux around an isolated object without changing the ambient temperature distribution so that the object can be "invisible" to external thermal environment. While designs of thermal invisibility cloaks inherit previous theories from optical cloaks, the uniqueness of heat diffusion leads to more achievable implementations. Thermal invisibility cloaks, as well as the variations including thermal concentrator, rotator, and illusion devices, have potentials to be applied in thermal management, sensing and imaging applications. Here, we review the current knowledge of thermal invisibility cloaks in terms of their design and implementation in cloaking studies, and their extension as other functional devices.

A Comparison of Parameter Study Creation and Job Submission Tools

NASA Technical Reports Server (NTRS)

DeVivo, Adrian; Yarrow, Maurice; McCann, Karen M.; Biegel, Bryan (Technical Monitor)

2001-01-01

We consider the differences between the available general purpose parameter study and job submission tools. These tools necessarily share many features, but frequently with differences in the way they are designed and implemented For this class of features, we will only briefly outline the essential differences. However we will focus on the unique features which distinguish the ILab parameter study and job submission tool from other packages, and which make the ILab tool easier and more suitable for use in our research and engineering environment.

SWOT analysis of program design and implementation: a case study on the reduction of maternal mortality in Afghanistan.

PubMed

Ahmadi, Qudratullah; Danesh, Homayoon; Makharashvili, Vasil; Mishkin, Kathryn; Mupfukura, Lovemore; Teed, Hillary; Huff-Rousselle, Maggie

2016-07-01

This case study analyzes the design and implementation of the Basic Package of Health Services (BPHS) in Afghanistan by synthesizing the literature with a focus on maternal health services. The authors are a group of graduate students in the Brandeis University International Health Policy and Management Program and Sustainable International Development Program who used the experience in Afghanistan to analyze an example of successfully implementing policy; two of the authors are Afghan physicians with direct experience in implementing the BPHS. Data is drawn from a literature review, and a unique aspect of the case study is the application of the business-oriented SWOT analysis to the design and implementation of the program that successfully targeted lowering maternal mortality in Afghanistan. It provides a useful example of how SWOT analysis can be used to consider the reasons for, or likelihood of, successful or unsuccessful design and implementation of a policy or program. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Overview of Engineering Design and Analysis at the NASA John C. Stennis Space Center

NASA Technical Reports Server (NTRS)

Ryan, Harry; Congiardo, Jared; Junell, Justin; Kirkpatrick, Richard

2007-01-01

A wide range of rocket propulsion test work occurs at the NASA John C. Stennis Space Center (SSC) including full-scale engine test activities at test facilities A-1, A-2, B-1 and B-2 as well as combustion device research and development activities at the E-Complex (E-1, E-2, E-3 and E-4) test facilities. The propulsion test engineer at NASA SSC faces many challenges associated with designing and operating a test facility due to the extreme operating conditions (e.g., cryogenic temperatures, high pressures) of the various system components and the uniqueness of many of the components and systems. The purpose of this paper is to briefly describe the NASA SSC Engineering Science Directorate s design and analysis processes, experience, and modeling techniques that are used to design and support the operation of unique rocket propulsion test facilities.

Minimum probe length for unique identification of all open reading frames in a microbial genome

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sokhansanj, B A; Ng, J; Fitch, J P

2000-03-05

In this paper, we determine the minimum hybridization probe length to uniquely identify at least 95% of the open reading frame (ORF) in an organism. We analyze the whole genome sequences of 17 species, 11 bacteria, 4 archaea, and 2 eukaryotes. We also present a mathematical model for minimum probe length based on assuming that all ORFs are random, of constant length, and contain an equal distribution of bases. The model accurately predicts the minimum probe length for all species, but it incorrectly predicts that all ORFs may be uniquely identified. However, a probe length of just 9 bases ismore » adequate to identify over 95% of the ORFs for all 15 prokaryotic species we studied. Using a minimum probe length, while accepting that some ORFs may not be identified and that data will be lost due to hybridization error, may result in significant savings in microarray and oligonucleotide probe design.« less

Predicting adolescent's cyberbullying behavior: A longitudinal risk analysis.

PubMed

Barlett, Christopher P

2015-06-01

The current study used the risk factor approach to test the unique and combined influence of several possible risk factors for cyberbullying attitudes and behavior using a four-wave longitudinal design with an adolescent US sample. Participants (N = 96; average age = 15.50 years) completed measures of cyberbullying attitudes, perceptions of anonymity, cyberbullying behavior, and demographics four times throughout the academic school year. Several logistic regression equations were used to test the contribution of these possible risk factors. Results showed that (a) cyberbullying attitudes and previous cyberbullying behavior were important unique risk factors for later cyberbullying behavior, (b) anonymity and previous cyberbullying behavior were valid risk factors for later cyberbullying attitudes, and (c) the likelihood of engaging in later cyberbullying behavior increased with the addition of risk factors. Overall, results show the unique and combined influence of such risk factors for predicting later cyberbullying behavior. Results are discussed in terms of theory. Copyright © 2015 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Terapascal static pressure generation with ultrahigh yield strength nanodiamond.

PubMed

Dubrovinskaia, Natalia; Dubrovinsky, Leonid; Solopova, Natalia A; Abakumov, Artem; Turner, Stuart; Hanfland, Michael; Bykova, Elena; Bykov, Maxim; Prescher, Clemens; Prakapenka, Vitali B; Petitgirard, Sylvain; Chuvashova, Irina; Gasharova, Biliana; Mathis, Yves-Laurent; Ershov, Petr; Snigireva, Irina; Snigirev, Anatoly

2016-07-01

Studies of materials' properties at high and ultrahigh pressures lead to discoveries of unique physical and chemical phenomena and a deeper understanding of matter. In high-pressure research, an achievable static pressure limit is imposed by the strength of available strong materials and design of high-pressure devices. Using a high-pressure and high-temperature technique, we synthesized optically transparent microballs of bulk nanocrystalline diamond, which were found to have an exceptional yield strength (~460 GPa at a confining pressure of ~70 GPa) due to the unique microstructure of bulk nanocrystalline diamond. We used the nanodiamond balls in a double-stage diamond anvil cell high-pressure device that allowed us to generate static pressures beyond 1 TPa, as demonstrated by synchrotron x-ray diffraction. Outstanding mechanical properties (strain-dependent elasticity, very high hardness, and unprecedented yield strength) make the nanodiamond balls a unique device for ultrahigh static pressure generation. Structurally isotropic, homogeneous, and made of a low-Z material, they are promising in the field of x-ray optical applications.

All-benzene carbon nanocages: size-selective synthesis, photophysical properties, and crystal structure.

PubMed

Matsui, Katsuma; Segawa, Yasutomo; Itami, Kenichiro

2014-11-19

The design and synthesis of a series of carbon nanocages consisting solely of benzene rings are described. Carbon nanocages are appealing molecules not only because they represent junction unit structures of branched carbon nanotubes, but also because of their potential utilities as unique optoelectronic π-conjugated materials and guest-encapsulating hosts. Three sizes of strained, conjugated [n.n.n]carbon nanocages (1, n = 4; 2, n = 5; 3, n = 6) were synthesized with perfect size-selectivity. Cyclohexane-containing units and 1,3,5-trisubstituted benzene-containing units were assembled to yield the minimally strained bicyclic precursors, which were successfully converted into the corresponding carbon nanocages via acid-mediated aromatization. X-ray crystallography of 1 confirmed the cage-shaped structure with an approximately spherical void inside the cage molecule. The present studies revealed the unique properties of carbon nanocages, including strain energies, size-dependent absorption and fluorescence, as well as unique size-dependency for the electronic features of 1-3.

Terapascal static pressure generation with ultrahigh yield strength nanodiamond

PubMed Central

Dubrovinskaia, Natalia; Dubrovinsky, Leonid; Solopova, Natalia A.; Abakumov, Artem; Turner, Stuart; Hanfland, Michael; Bykova, Elena; Bykov, Maxim; Prescher, Clemens; Prakapenka, Vitali B.; Petitgirard, Sylvain; Chuvashova, Irina; Gasharova, Biliana; Mathis, Yves-Laurent; Ershov, Petr; Snigireva, Irina; Snigirev, Anatoly

2016-01-01

Studies of materials’ properties at high and ultrahigh pressures lead to discoveries of unique physical and chemical phenomena and a deeper understanding of matter. In high-pressure research, an achievable static pressure limit is imposed by the strength of available strong materials and design of high-pressure devices. Using a high-pressure and high-temperature technique, we synthesized optically transparent microballs of bulk nanocrystalline diamond, which were found to have an exceptional yield strength (~460 GPa at a confining pressure of ~70 GPa) due to the unique microstructure of bulk nanocrystalline diamond. We used the nanodiamond balls in a double-stage diamond anvil cell high-pressure device that allowed us to generate static pressures beyond 1 TPa, as demonstrated by synchrotron x-ray diffraction. Outstanding mechanical properties (strain-dependent elasticity, very high hardness, and unprecedented yield strength) make the nanodiamond balls a unique device for ultrahigh static pressure generation. Structurally isotropic, homogeneous, and made of a low-Z material, they are promising in the field of x-ray optical applications. PMID:27453944

Design development of graphite primary structures enables SSTO success

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biagiotti, V.A.; Yahiro, J.S.; Suh, D.E.

1997-01-01

This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA{close_quote}s X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman{close_quote}s approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Sectionmore » Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria. {copyright} {ital 1997 American Institute of Physics.}« less

Proceedings of the 6th Annual Summer Conference: NASA/USRA University Advanced Design Program

NASA Technical Reports Server (NTRS)

1990-01-01

The NASA/USRA University Advanced Design Program is a unique program that brings together NASA engineers, students, and faculty from United States engineering schools by integrating current and future NASA space/aeronautics engineering design projects into the university curriculum. The Program was conceived in the fall of 1984 as a pilot project to foster engineering design education in the universities and to supplement NASA's in-house efforts in advanced planning for space and aeronautics design. Nine universities and five NASA centers participated in the first year of the pilot project. The study topics cover a broad range of potential space and aeronautics projects that could be undertaken during a 20 to 30 year period beginning with the deployment of the Space Station Freedom scheduled for the mid-1990s. Both manned and unmanned endeavors are embraced, and the systems approach to the design problem is emphasized.

Design, fabrication, and test of lightweight shell structure, phase 2

NASA Technical Reports Server (NTRS)

1974-01-01

A cylindrical shell skirt structure 4.57 m (180 in.) in diameter and 3.66 m (144 in.) high was subjected to a design and analysis study using a wide variety of structural materials and concepts. The design loading of 1225.8 N/cm (700 lb/in.) axial compression and 245.2 N/cm (140 lb/in.) torsion is representative of that expected on a typical space tug skirt section. Structural concepts evaluated included honeycomb sandwich, truss, isogrid, and skin/stringer/frame. The materials considered included a wide variety of structural metals as well as glass, graphite, and boron-reinforced composites. The most unique characteristic of the candidate designs is that they involve the use of very thin-gage material. Fabrication and structural test of small panels and components representative of many of the candidate designs served to demonstrate proposed fabrication techniques and to verify design and analysis methods.

CEM-designer: design of custom expression microarrays in the post-ENCODE Era.

PubMed

Arnold, Christian; Externbrink, Fabian; Hackermüller, Jörg; Reiche, Kristin

2014-11-10

Microarrays are widely used in gene expression studies, and custom expression microarrays are popular to monitor expression changes of a customer-defined set of genes. However, the complexity of transcriptomes uncovered recently make custom expression microarray design a non-trivial task. Pervasive transcription and alternative processing of transcripts generate a wealth of interweaved transcripts that requires well-considered probe design strategies and is largely neglected in existing approaches. We developed the web server CEM-Designer that facilitates microarray platform independent design of custom expression microarrays for complex transcriptomes. CEM-Designer covers (i) the collection and generation of a set of unique target sequences from different sources and (ii) the selection of a set of sensitive and specific probes that optimally represents the target sequences. Probe design itself is left to third party software to ensure that probes meet provider-specific constraints. CEM-Designer is available at http://designpipeline.bioinf.uni-leipzig.de. Copyright © 2014 Elsevier B.V. All rights reserved.

The MUSES Satellite Team and Multidisciplinary System Engineering

NASA Technical Reports Server (NTRS)

Chen, John C.; Paiz, Alfred R.; Young, Donald L.

1997-01-01

In a unique partnership between three minority-serving institutions and NASA's Jet Propulsion Laboratory, a new course sequence, including a multidisciplinary capstone design experience, is to be developed and implemented at each of the schools with the ambitious goal of designing, constructing and launching a low-orbit Earth-resources satellite. The three universities involved are North Carolina A&T State University (NCA&T), University of Texas, El Paso (UTEP), and California State University, Los Angeles (CSULA). The schools form a consortium collectively known as MUSES - Minority Universities System Engineering and Satellite. Four aspects of this project make it unique: (1) Including all engineering disciplines in the capstone design course, (2) designing, building and launching an Earth-resources satellite, (3) sustaining the partnership between the three schools to achieve this goal, and (4) implementing systems engineering pedagogy at each of the three schools. This paper will describe the partnership and its goals, the first design of the satellite, the courses developed at NCA&T, and the implementation plan for the course sequence.

Achieving Space Shuttle ATO Using the Five-Segment Booster (FSB)

NASA Technical Reports Server (NTRS)

Sauvageau, Donald R.; McCool, Alex (Technical Monitor)

2001-01-01

As part of the continuing effort to identify approaches to improve the safety and reliability of the Space Shuttle system, a Five-Segment Booster (FSB) design was conceptualized as a replacement for the current Space Shuttle boosters. The FSB offers a simple, unique approach to improve astronaut safety and increase performance margin. To determine the feasibility of the FSB, a Phase A study effort was sponsored by NASA and directed by the Marshall Space Flight Center. This study was initiated in March of 1999 and completed in December of 2000. The basic objective of this study was to assess the feasibility of the FSB design concept and also estimate the cost and scope of a full-scale development program for the FSB. In order to ensure an effective and thorough evaluation of the FSB concept, four team members were put on contract to support various areas of importance in assessing the overall feasibility of the design approach.

Informal physics learning from video games: a case study using gameplay videos

NASA Astrophysics Data System (ADS)

Croxton, DeVaughn; Kortemeyer, Gerd

2018-01-01

Researching informal gameplay can be challenging, since as soon as a formal study design is imposed, it becomes neither casual nor self-motivated. As a case study of a non-invasive design, we analyze publicly posted gameplay videos to assess the effectiveness of a physics educational video game on special relativity. These videos offer unique insights into informal learning through gaming, as players do not only describe the gameplay mechanics, but also explore physics concepts in a think-aloud fashion while they ponder the experience and effects. We find that while this methodology has substantial limitations, it is complementary when it comes to assessing motivations and attitudes, as well as to gathering data on conceptual hurdles.

Principal Components Analysis of Reflectance Spectra from the Mars Exploration Rover Opportunity

NASA Technical Reports Server (NTRS)

Mercer, C. M.; Cohen, B. A.

2010-01-01

In the summer of 2007 a global dust storm on Mars effectively disabled Opportunity's Miniature Thermal Emission Spectrometer (Mini-TES), the primary instrument used by the Athena Science Team to identify locally unique rocks on the Martian surface. The science team needs another way to distinguish interesting rocks from their surroundings on a tactical timescale. This study was designed to develop the ability to identify locally unique rocks on the Martian surface remotely using the Mars Exploration Rovers' Panoramica Camera (PanCam) instrument. Meridiani bedrock observed by Opportunity is largely characterized by sulfate-rich sandstones and hematite spherules. Additionally, loose fragments of bedrock and "cobbles" of foreign origin collet on the surface, some of which are interpreted as meteorites.

Instrumentation for fast-scan cyclic voltammetry combined with electrophysiology for behavioral experiments in freely moving animals

NASA Astrophysics Data System (ADS)

Takmakov, Pavel; McKinney, Collin J.; Carelli, Regina M.; Wightman, R. Mark

2011-07-01

Fast-scan cyclic voltammetry is a unique technique for sampling dopamine concentration in the brain of rodents in vivo in real time. The combination of in vivo voltammetry with single-unit electrophysiological recording from the same microelectrode has proved to be useful in studying the relationship between animal behavior, dopamine release and unit activity. The instrumentation for these experiments described here has two unique features. First, a 2-electrode arrangement implemented for voltammetric measurements with the grounded reference electrode allows compatibility with electrophysiological measurements, iontophoresis, and multielectrode measurements. Second, we use miniaturized electronic components in the design of a small headstage that can be fixed on the rat's head and used in freely moving animals.

Future projects in asteroseismology: the unique role of Antarctica

NASA Astrophysics Data System (ADS)

Mosser, B.; Siamois Team

Asteroseismology requires observables registered in stringent conditions: very high sensitivity, uninterrupted time series, long duration. These specifications then allow to study the details of the stellar interior structure. Space-borne and ground-based asteroseismic projects are presented and compared. With CoRoT as a precursor, then Kepler and maybe Plato, the roadmap in space appears to be precisely designed. In parallel, ground-based projects are necessary to provide different and unique information on bright stars with Doppler measurements. Dome C appears to be the ideal place for ground-based asteroseismic observations. The unequalled weather conditions yield a duty cycle comparable to space. Long time series (up to 3 months) will be possible, thanks to the long duration of the polar night.

Instrumentation for fast-scan cyclic voltammetry combined with electrophysiology for behavioral experiments in freely moving animals

PubMed Central

Takmakov, Pavel; McKinney, Collin J.; Carelli, Regina M.; Wightman, R. Mark

2011-01-01

Fast-scan cyclic voltammetry is a unique technique for sampling dopamine concentration in the brain of rodents in vivo in real time. The combination of in vivo voltammetry with single-unit electrophysiological recording from the same microelectrode has proved to be useful in studying the relationship between animal behavior, dopamine release and unit activity. The instrumentation for these experiments described here has two unique features. First, a 2-electrode arrangement implemented for voltammetric measurements with the grounded reference electrode allows compatibility with electrophysiological measurements, iontophoresis, and multielectrode measurements. Second, we use miniaturized electronic components in the design of a small headstage that can be fixed on the rat's head and used in freely moving animals. PMID:21806203

Evaluation of an affinity-amplified immunoassay of graphene oxide using surface plasmon resonance biosensors

NASA Astrophysics Data System (ADS)

Chiu, Nan-Fu; Huang, Teng-Yi; Kuo, Chun-Chuan

2015-05-01

We describe a fundamental study on the plasmonic properties and advanced biosensing mechanisms of functionalized graphene. We discuss a specific design using modified carboxyl groups, which can modulate surface plasmon (SP) coupling and provide an advantage for their binding to the sensing layer with high-performance affinity in an immunological reaction. The functionalized graphene-based surface plasmon resonance (SPR) biosensors have three advantages: high performance, high sensitivity, and excellent molecular kinetic response. In the future, functionalized graphene sheets will make a unique contribution to photonic and SPR diagnosis devices. We wish to highlight the essential characteristics of functionalized graphene-based SPR biosensors to assist researchers in developing and advancing suitable biosensors for unique applications.

Effective, clinically feasible and sustainable: Key design features of psycho-educational and supportive care interventions to promote individualised self-management in cancer care.

PubMed

Schofield, Penelope; Chambers, Suzanne

2015-05-01

As the global burden of cancer increases healthcare services will face increasing challenges in meet the complex needs of these patients, their families and the communities in which they live. This raises the question of how to meet patient need where direct clinical contact may be constrained or not readily available. Patients and families require resources and skills to manage their illness outside of the hospital setting within their own communities. To propose a framework for the development and delivery of psycho-educational and supportive care interventions drawing on theoretical principles of behaviour change and evidence-based interventions, and based on extensive experience in developing and testing complex interventions in oncology. At the core of this intervention framework are considerations of efficiency: interventions are designed to cater for individuals' unique needs; to place minimal demands on the health system infrastructure and to be rapidly disseminated into usual care if successful. There are seven key features: 1) Targeting cancer type and stage; 2) Tailoring to unique individual needs; 3) Promotion of patient self-management of their disease and treatment side effects; 4) Efficient delivery of the intervention; 5) Training and adherence to protocol; 6) Ensuring the intervention is evidence-based; 7) Confirming stakeholder acceptability of the intervention. A case study of a randomised controlled trial which tested psycho-educational oncology interventions using this framework is presented. These interventions were designed to cater for individuals' unique needs and promote self-management while placing minimal demands on the acute health care setting. Innovative ways to realise the potentially major impact that psycho-educational and supportive care interventions can have on psychological morbidity, coping, symptoms and quality of life in serious and chronic illness are needed. This framework, which is driven by theory, evidence, and experience, is designed to ensure that interventions are effective, clinically feasible and sustainable.

The MSFC Collaborative Engineering Process for Preliminary Design and Concept Definition Studies

NASA Technical Reports Server (NTRS)

Mulqueen, Jack; Jones, David; Hopkins, Randy

2011-01-01

This paper describes a collaborative engineering process developed by the Marshall Space Flight Center's Advanced Concepts Office for performing rapid preliminary design and mission concept definition studies for potential future NASA missions. The process has been developed and demonstrated for a broad range of mission studies including human space exploration missions, space transportation system studies and in-space science missions. The paper will describe the design team structure and specialized analytical tools that have been developed to enable a unique rapid design process. The collaborative engineering process consists of integrated analysis approach for mission definition, vehicle definition and system engineering. The relevance of the collaborative process elements to the standard NASA NPR 7120.1 system engineering process will be demonstrated. The study definition process flow for each study discipline will be will be outlined beginning with the study planning process, followed by definition of ground rules and assumptions, definition of study trades, mission analysis and subsystem analyses leading to a standardized set of mission concept study products. The flexibility of the collaborative engineering design process to accommodate a wide range of study objectives from technology definition and requirements definition to preliminary design studies will be addressed. The paper will also describe the applicability of the collaborative engineering process to include an integrated systems analysis approach for evaluating the functional requirements of evolving system technologies and capabilities needed to meet the needs of future NASA programs.

Human Factors Engineering and testing for a wearable, long duration ultrasound system self-applied by an end user.

PubMed

Taggart, Rebecca; Langer, Matthew D; Lewis, George K

2014-01-01

One of the major challenges in the design of a new class of medical device is ensuring that the device will have a safe and effective user interface for the intended users. Human Factors Engineering addresses these concerns through direct study of how a user interacts with newly designed devices with unique features. In this study, a novel long duration, low intensity therapeutic ultrasound device is tested by 20 end users representative of the intended user population. Over 90% of users were able to operate the device successfully. The therapeutic ultrasound device was found to be reasonably safe and effective for the intended users, uses, and use environments.

Hydrogen/Oxygen Propellant Densifier Thermoacoustic Stirling Heat Engine

NASA Astrophysics Data System (ADS)

Nguyen, C. T.; Yeckley, A. J.; Schieb, D. J.; Haberbusch, M. S.

2004-06-01

A unique, patent pending, thermoacoustic propellant densifier for the simultaneous densification of hydrogen and oxygen propellants for aerospace vehicles is introduced. The densifier uses a high-pressure amplitude, low-frequency Thermoacoustic Stirling Heat Engine (TASHE) coupled with a uniquely designed half-wave-length resonator to drive a pulse tube cryocooler using a Gas Helium (GHe) working fluid. The extremely reliable TASHE has no moving parts, is water cooled, and is electrically powered. The helium-filled TASHE is designed to ASME piping codes, which enables the safe inspection of the system while in operation. The resonator is designed to eliminate higher-order harmonics with minimal acoustic losses. A system description will be presented, and experimental data on both the TASHE and the resonator will be compared with analytical results.

The Physics and Mathematics of MRI

NASA Astrophysics Data System (ADS)

Ansorge, Richard; Graves, Martin

2016-10-01

Magnetic Resonance Imaging is a very important clinical imaging tool. It combines different fields of physics and engineering in a uniquely complex way. MRI is also surprisingly versatile, `pulse sequences' can be designed to yield many different types of contrast. This versatility is unique to MRI. This short book gives both an in depth account of the methods used for the operation and construction of modern MRI systems and also the principles of sequence design and many examples of applications. An important additional feature of this book is the detailed discussion of the mathematical principles used in building optimal MRI systems and for sequence design. The mathematical discussion is very suitable for undergraduates attending medical physics courses. It is also more complete than usually found in alternative books for physical scientists or more clinically orientated works.

Critical Need for Family-Based, Quasi-Experimental Designs in Integrating Genetic and Social Science Research

PubMed Central

Lahey, Benjamin B.; Turkheimer, Eric; Lichtenstein, Paul

2013-01-01

Researchers have identified environmental risks that predict subsequent psychological and medical problems. Based on these correlational findings, researchers have developed and tested complex developmental models and have examined biological moderating factors (e.g., gene–environment interactions). In this context, we stress the critical need for researchers to use family-based, quasi-experimental designs when trying to integrate genetic and social science research involving environmental variables because these designs rigorously examine causal inferences by testing competing hypotheses. We argue that sibling comparison, offspring of twins or siblings, in vitro fertilization designs, and other genetically informed approaches play a unique role in bridging gaps between basic biological and social science research. We use studies on maternal smoking during pregnancy to exemplify these principles. PMID:23927516

Critical need for family-based, quasi-experimental designs in integrating genetic and social science research.

PubMed

D'Onofrio, Brian M; Lahey, Benjamin B; Turkheimer, Eric; Lichtenstein, Paul

2013-10-01

Researchers have identified environmental risks that predict subsequent psychological and medical problems. Based on these correlational findings, researchers have developed and tested complex developmental models and have examined biological moderating factors (e.g., gene-environment interactions). In this context, we stress the critical need for researchers to use family-based, quasi-experimental designs when trying to integrate genetic and social science research involving environmental variables because these designs rigorously examine causal inferences by testing competing hypotheses. We argue that sibling comparison, offspring of twins or siblings, in vitro fertilization designs, and other genetically informed approaches play a unique role in bridging gaps between basic biological and social science research. We use studies on maternal smoking during pregnancy to exemplify these principles.

Multiple IMU system hardware interface design, volume 2

NASA Technical Reports Server (NTRS)

Landey, M.; Brown, D.

1975-01-01

The design of each system component is described. Emphasis is placed on functional requirements unique in this system, including data bus communication, data bus transmitters and receivers, and ternary-to-binary torquing decision logic. Mechanization drawings are presented.

45 CFR 1356.83 - Reporting requirements and data elements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... specifically designed instruction, at no cost to parents, to meet the unique needs of a child with a disability... element must be left blank. (21) Academic support. Academic supports are services designed to help a youth... are services designed to help a youth enter or complete a post-secondary education and include the...

45 CFR 1356.83 - Reporting requirements and data elements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... specifically designed instruction, at no cost to parents, to meet the unique needs of a child with a disability... element must be left blank. (21) Academic support. Academic supports are services designed to help a youth... are services designed to help a youth enter or complete a post-secondary education and include the...

45 CFR 1356.83 - Reporting requirements and data elements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... specifically designed instruction, at no cost to parents, to meet the unique needs of a child with a disability... element must be left blank. (21) Academic support. Academic supports are services designed to help a youth... are services designed to help a youth enter or complete a post-secondary education and include the...

45 CFR 1356.83 - Reporting requirements and data elements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... specifically designed instruction, at no cost to parents, to meet the unique needs of a child with a disability... element must be left blank. (21) Academic support. Academic supports are services designed to help a youth... are services designed to help a youth enter or complete a post-secondary education and include the...

Pre-PDK block-level PPAC assessment of technology options for sub-7nm high-performance logic

NASA Astrophysics Data System (ADS)

Liebmann, L.; Northrop, G.; Facchini, M.; Riviere Cazaux, L.; Baum, Z.; Nakamoto, N.; Sun, K.; Chanemougame, D.; Han, G.; Gerousis, V.

2018-03-01

This paper describes a rigorous yet flexible standard cell place-and-route flow that is used to quantify block-level power, performance, and area trade-offs driven by two unique cell architectures and their associated design rule differences. The two architectures examined in this paper differ primarily in their use of different power-distribution-networks to achieve the desired circuit performance for high-performance logic designs. The paper shows the importance of incorporating block-level routability experiments in the early phases of design-technology co-optimization by reviewing a series of routing trials that explore different aspects of the technology definition. Since the electrical and physical parameters leading to critical process assumptions and design rules are unique to specific integration schemes and design objectives, it is understood that the goal of this work is not to promote one cell-architecture over another, but rather to convey the importance of exploring critical trade-offs long before the process details of the technology node are finalized to a point where a process design kit can be published.

Biomedical experiments. Part A: Biostack experiment

NASA Technical Reports Server (NTRS)

Buecker, H.; Horneck, G.; Reinholz, E.; Scheuermann, W.; Ruether, W.; Graul, E. H.; Planel, H.; Soleilhavoup, J. P.; Cuer, P.; Kaiser, R.

1972-01-01

The biostack experiment is described which was designed to study the biologic effects of individual heavy nuclei of galactic cosmic radiation during space flight outside the magnetosphere of the earth. Specifically, the biostack experiment was designed to promote research on the effects of high energy/high Z particles of galactic cosmic radiation on a broad spectrum of biologic systems, from the molecular to the highly organized and developed forms of life. The experiment was considered unique and scientifically meritorious because of its potential yield of information - currently unavailable on earth - on the interaction of biologic systems with the heavy particles of galactic cosmic radiation.

Solar System Science with the Twinkle Space Mission

NASA Astrophysics Data System (ADS)

Bowles, N.; Lindsay, S.; Tessenyi, M.; Tinetti, G.; Savini, G.; Tennyson, J.; Pascale, E.; Jason, S.; Vora, A.

2017-09-01

Twinkle is a space-based telescope mission designed for the spectroscopic observation (0.4 to 4.5 μm) of exoplanet atmospheres and Solar System objects. The system design and mission implementation are based on existing, well studied concepts pioneered by Surrey Satellite Technology Ltd for low-Earth orbit Earth Observation satellites, supported by a novel international access model to allow facility access to researchers worldwide. Whilst Twinkle's primary science goal is the observation of exoplanet atmospheres its wide spectroscopic range and photometric stability also make it a unique platform for the observation of Solar system objects.

Investigation of Learning Behaviors and Achievement of Vocational High School Students Using an Ubiquitous Physics Tablet PC App

ERIC Educational Resources Information Center

Purba, Siska Wati Dewi; Hwang, Wu-Yuin

2017-01-01

In this study, we designed and developed an app called Ubiquitous-Physics (U-Physics) for mobile devices like tablet PC or smart phones to help students learn the principles behind a simple pendulum in Physics. The unique characteristic of U-Physics is the use of sensors on mobile devices to collect acceleration and velocity data during pendulum…

A survey of active controls benefits to supersonic transports

NASA Technical Reports Server (NTRS)

Pratt, K. G.

1976-01-01

Results are drawn from studies of the impact of advanced technologies on the design of an arrow-wing configuration. Information presented includes estimated benefits, effects of combinations of active control concepts, and constraints. Emphasis is placed on characteristics that are uniquely related to a large airframe featuring a slender body with a fixed wing of low aspect ratio, high sweep, and small thickness ratio.

Advanced Alarm Systems: Revision of Guidance and Its Technical Basis

DTIC Science & Technology

2000-11-01

was required to generalize from the unique aspects of individual experiments and studies to actual applications in the workplace . This is because...types of equipment used). For example , laboratory experiments often do not involve tasks of the complexity of NPP operations, and most experiments do...Cognitive Compatibility, Situation Awareness, Task Compatibility, and Timeliness. Figure 3.3 Example of an alarm system design review guideline Each

Alpha-canonical form representation of the open loop dynamics of the Space Shuttle main engine

NASA Technical Reports Server (NTRS)

Duyar, Almet; Eldem, Vasfi; Merrill, Walter C.; Guo, Ten-Huei

1991-01-01

A parameter and structure estimation technique for multivariable systems is used to obtain a state space representation of open loop dynamics of the space shuttle main engine in alpha-canonical form. The parameterization being used is both minimal and unique. The simplified linear model may be used for fault detection studies and control system design and development.

U.S. Geological Survey

NASA Technical Reports Server (NTRS)

1996-01-01

The Hydrologic Instrumentation Facility (HIF) at Stennis Space Center is a unique high-tech facility that provides hydrologic instrumentation support to the U. S. Geological Survey and other federal agencies worldwide. The HIF has the responsibility for warehousing, testing, evaluating, designing, repairing, and calibrating numerous pieces of hydrologic instrumentation, which is used in studying water on the surface, in the soil, and in the atmosphere of the Earth.

Unifying Faculty, Staff, Students, and Community by Establishing and Implementing a Unique Vision for a New Elementary School.

ERIC Educational Resources Information Center

Currie, John R.

The principal of a newly opened elementary school implemented a practicum study designed to unify faculty, parents, staff, and children; add direction to the program; develop a sense of purpose; and increase participation. It was expected that a vision statement would be developed in the school's first year of operation, and that parents and staff…

Designing Epigenome Editors: Considerations of Biochemical and Locus Specificities.

PubMed

Sen, Dilara; Keung, Albert J

2018-01-01

The advent of locus-specific protein recruitment technologies has enabled a new class of studies in chromatin biology. Epigenome editors enable biochemical modifications of chromatin at almost any specific endogenous locus. Their locus specificity unlocks unique information including the functional roles of distinct modifications at specific genomic loci. Given the growing interest in using these tools for biological and translational studies, there are many specific design considerations depending on the scientific question or clinical need. Here we present and discuss important design considerations and challenges regarding the biochemical and locus specificities of epigenome editors. These include how to account for the complex biochemical diversity of chromatin; control for potential interdependency of epigenome editors and their resultant modifications; avoid sequestration effects; quantify the locus specificity of epigenome editors; and improve locus specificity by considering concentration, affinity, avidity, and sequestration effects.

A multi-purpose electromagnetic actuator for magnetic resonance elastography.

PubMed

Feng, Yuan; Zhu, Mo; Qiu, Suhao; Shen, Ping; Ma, Shengyuan; Zhao, Xuefeng; Hu, Chun-Hong; Guo, Liang

2018-04-19

An electromagnetic actuator was designed for magnetic resonance elastography (MRE). The actuator is unique in that it is simple, portable, and capable of brain, abdomen, and phantom imagings. A custom-built control unit was used for controlling the vibration frequency and synchronizing the trigger signals. An actuation unit was built and mounted on the specifically designed clamp and holders for different imaging applications. MRE experiments with respect to gel phantoms, brain, and liver showed that the actuator could produce stable and consistent mechanical waves. Estimated shear modulus using local frequency estimate method demonstrated that the measurement results were in line with that from MRE studies using different actuation systems. The relatively easy setup procedure and simple design indicated that the actuator system had the potential to be applied in many different clinical studies. Copyright © 2018 Elsevier Inc. All rights reserved.

Adapting the Unique Minds Program: Exploring the Feasibility of a Multiple Family Intervention for Children with Learning Disabilities in the Context of Spain.

PubMed

López-Larrosa, Silvia; González-Seijas, Rosa M; Carpenter, John S W

2017-06-01

The Unique Minds Program (Stern, Unique Minds Program, 1999) addresses the socio-emotional needs of children with learning disabilities (LD) and their families. Children and their parents work together in a multiple family group to learn more about LD and themselves as people with the capacity to solve problems in a collaborative way, including problems in family school relationships. This article reports the cultural adaptation of the program for use in Spain and findings from a feasibility study involving three multiple family groups and a total of 15 children and 15 mothers, using a pre-post design. This Spanish adaptation of the program is called "Mentes Únicas". Standardized outcome measures indicated an overall statistically significant decrease in children's self-rated maladjustment and relationship difficulties by the end of the program. Improvements were endorsed by most mothers, although they were not always recognized by the children's teachers. The program had a high level of acceptability: Mothers and children felt safe, understood, and helped throughout the sessions. The efficacy of the adapted intervention for the context of Spain remains to be tested in a more rigorous study. © 2016 Family Process Institute.

Coping as a building mechanism to explain the unique association of affect and goal motivation with changes in affective states.

PubMed

Blouin-Hudon, Eve-Marie C; Gaudreau, Patrick; Gareau, Alexandre

2016-09-01

In this study, we examined the mediating role of university students' coping strategies in the unique/additive influence of affective states and goal motivation on upward changes in affect during a midterm exam period. Using a short-term prospective design, key assumptions from the self-concordance model and the broaden-and-build theory were drawn upon to determine whether coping strategies are influenced by goal motivation and affective states, while also subsequently influencing short-term changes in affective states during a semester. A sample of 272 students (79% females and 21% males) participated in a study in which they completed questionnaires twice during the semester. Results of structural equation modeling, using a true latent change approach, have generally supported our hypotheses. Positive affective states and autonomous goal motivation prospectively predicted task-oriented coping which, in turn, was associated with increases in positive affect. Negative affective states and controlled goal motivation prospectively predicted disengagement-oriented coping which, in turn, was associated with increases in negative affect. Coping partially mediates the unique association of affect and goal motivation with changes in affective states of university students.

Understanding and preventing type 1 diabetes through the unique working model of TrialNet.

PubMed

Battaglia, Manuela; Anderson, Mark S; Buckner, Jane H; Geyer, Susan M; Gottlieb, Peter A; Kay, Thomas W H; Lernmark, Åke; Muller, Sarah; Pugliese, Alberto; Roep, Bart O; Greenbaum, Carla J; Peakman, Mark

2017-11-01

Type 1 diabetes is an autoimmune disease arising from the destruction of pancreatic insulin-producing beta cells. The disease represents a continuum, progressing sequentially at variable rates through identifiable stages prior to the onset of symptoms, through diagnosis and into the critical periods that follow, culminating in a variable depth of beta cell depletion. The ability to identify the very earliest of these presymptomatic stages has provided a setting in which prevention strategies can be trialled, as well as furnishing an unprecedented opportunity to study disease evolution, including intrinsic and extrinsic initiators and drivers. This niche opportunity is occupied by Type 1 Diabetes TrialNet, an international consortium of clinical trial centres that leads the field in intervention and prevention studies, accompanied by deep longitudinal bio-sampling. In this review, we focus on discoveries arising from this unique bioresource, comprising more than 70,000 samples, and outline the processes and science that have led to new biomarkers and mechanistic insights, as well as identifying new challenges and opportunities. We conclude that via integration of clinical trials and mechanistic studies, drawing in clinicians and scientists and developing partnership with industry, TrialNet embodies an enviable and unique working model for understanding a disease that to date has no cure and for designing new therapeutic approaches.

Understanding and preventing type 1 diabetes through the unique working model of TrialNet

PubMed Central

Anderson, Mark S.; Buckner, Jane H.; Geyer, Susan M.; Gottlieb, Peter A.; Kay, Thomas W. H.; Lernmark, Åke; Muller, Sarah; Pugliese, Alberto; Roep, Bart O.; Greenbaum, Carla J.

2018-01-01

Type 1 diabetes is an autoimmune disease arising from the destruction of pancreatic insulin-producing beta cells. The disease represents a continuum, progressing sequentially at variable rates through identifiable stages prior to the onset of symptoms, through diagnosis and into the critical periods that follow, culminating in a variable depth of beta cell depletion. The ability to identify the very earliest of these presymptomatic stages has provided a setting in which prevention strategies can be trialled, as well as furnishing an unprecedented opportunity to study disease evolution, including intrinsic and extrinsic initiators and drivers. This niche opportunity is occupied by Type 1 Diabetes TrialNet, an international consortium of clinical trial centres that leads the field in intervention and prevention studies, accompanied by deep longitudinal bio-sampling. In this review, we focus on discoveries arising from this unique bioresource, comprising more than 70,000 samples, and outline the processes and science that have led to new biomarkers and mechanistic insights, as well as identifying new challenges and opportunities. We conclude that via integration of clinical trials and mechanistic studies, drawing in clinicians and scientists and developing partnership with industry, TrialNet embodies an enviable and unique working model for understanding a disease that to date has no cure and for designing new therapeutic approaches. PMID:28770323

The unique achievements of Japanese industries in the super-aged society.

PubMed

Kawahara, Keiji; Narikawa, Masafumi

2015-01-01

Unique efforts of the Japanese industries in meeting the needs of the super-aged society are introduced through their association with International Association for Universal Design (IAUD). Considerations are made on how successes were brought about, what can be learned as well as what issues should be addressed in the future. Copyright © 2014. Published by Elsevier Ltd.

21 CFR 801.45 - Devices that must be directly marked with a unique device identifier.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Devices that must be directly marked with a unique device identifier. 801.45 Section 801.45 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... previously marked under paragraph (a) of this section. (e) Exception to be noted in design history file. A...

Grooker, KartOO, Addict-o-Matic and More: Really Different Search Engines

ERIC Educational Resources Information Center

Descy, Don E.

2009-01-01

There are hundreds of unique search engines in the United States and thousands of unique search engines around the world. If people get into search engines designed just to search particular web sites, the number is in the hundreds of thousands. This article looks at: (1) clustering search engines, such as KartOO (www.kartoo.com) and Grokker…

Challenges for Engineering Design, Construction, and Maintenance of Infrastructure in Afghanistan

DTIC Science & Technology

2010-11-01

applied engineering expertise that collectively can solve challenging infra- structure problems. USACE-ERDC’s researchers and engineers are field...Development Center (ERDC) possesses a unique combination of basic research and applied engineering expertise that collectively can solve challenging...restoration, and other projects. The USACE Engineer Research and Development Center (ERDC) possesses a unique combination of basic research and applied

A Unique Sequence of Financial Accounting Courses Featuring Team Teaching, Linked Courses, Challenging Assignments, and Instruments for Evaluation and Assessment

ERIC Educational Resources Information Center

Lundblad, Heidemarie; Wilson, Barbara A.

2008-01-01

The Department of Accounting at California State University Northridge (CSUN) has developed a unique sequence of courses designed to ensure that accounting students are trained not only in technical accounting, but also acquire critical thinking, research and communication skills. The courses have proven effective and have embedded assessment…

Neuropsychological profile of schizophrenia with and without obsessive compulsive disorder.

PubMed

Kazhungil, Firoz; Kumar, Keshav J; Viswanath, Biju; Shankar, Ravi Girikematha; Kandavel, Thennarasu; Math, Suresh Bada; Venkatasubramanian, Ganesan; Reddy, Y C J

2017-10-01

Neuropsychological profile of schizophrenia with obsessive compulsive disorder (OCD) in comparison with that of schizophrenia without OCD is understudied and the results are inconsistent. We hypothesize that patients having schizophrenia with OCD ('schizo-obsessive disorder') may have unique neuropsychological deficits in comparison with those with schizophrenia alone, particularly with respect to executive functions. Thirty patients with schizo-obsessive disorder and 30 individually matched patients with schizophrenia without any obsessive-compulsive symptoms formed the sample of the study. Neuropsychological assessment included tests for attention, executive functions and memory. Patients with schizo-obsessive disorder did not differ from those with schizophrenia alone with respect to measures of attention, executive functions and memory. Our findings do not support unique neuropsychological profile of schizo-obsessive disorder. Studying a larger sample of drug-naive patients in a longitudinal design may provide us more insights in to this. Copyright © 2017 Elsevier B.V. All rights reserved.

Improved Design of Optical MEMS Using the SUMMiT Fabrication Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michalicek, M.A.; Comtois, J.H.; Barron, C.C.

This paper describes the design and fabrication of optical Microelectromechanical Systems (MEMS) devices using the Sandia Ultra planar Multilevel MEMS Technology (SUMMiT) fabrication process. This state of the art process, offered by Sandia National Laboratories, provides unique and very advantageous features which make it ideal for optical devices. This enabling process permits the development of micromirror devices with near ideal characteristics which have previously been unrealizable in standard polysilicon processes. This paper describes such characteristics as elevated address electrodes, individual address wiring beneath the device, planarized mirror surfaces, unique post-process metallization, and the best active surface area to date.

Design manual for low water stream crossings.

DOT National Transportation Integrated Search

1983-10-01

The purpose of this manual is to provide design guidelines for : low water stream crossings (LWSCs). Rigid criteria for determining the : applicability of a LWSC to a given site are not established since each : site is unique in terms of physical, so...

Assessment of the Seattle Smart Traveler evaluation

DOT National Transportation Integrated Search

1999-09-01

The system was designed using a World Wide Web or Internet interface. Two of the unique features of the design were accommodating the desired travel times and identifying origins and destinations. A search structure was developed using a series of pu...

Catalytic Chemistry on Oxide Nanostructures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Asthagiri, Aravind; Dixon, David A.; Dohnalek, Zdenek

2016-05-29

Metal oxides represent one of the most important and widely employed materials in catalysis. Extreme variability of their chemistry provides a unique opportunity to tune their properties and to utilize them for the design of highly active and selective catalysts. For bulk oxides, this can be achieved by varying their stoichiometry, phase, exposed surface facets, defect, dopant densities and numerous other ways. Further, distinct properties from those of bulk oxides can be attained by restricting the oxide dimensionality and preparing them in the form of ultrathin films and nanoclusters as discussed throughout this book. In this chapter we focus onmore » demonstrating such unique catalytic properties brought by the oxide nanoscaling. In the highlighted studies planar models are carefully designed to achieve minimal dispersion of structural motifs and to attain detailed mechanistic understanding of targeted chemical transformations. Detailed level of morphological and structural characterization necessary to achieve this goal is accomplished by employing both high-resolution imaging via scanning probe methods and ensemble-averaged surface sensitive spectroscopic methods. Three prototypical examples illustrating different properties of nanoscaled oxides in different classes of reactions are selected.« less

One pot electrochemical synthesis of polymer/CNT/metal nanoparticles for fuel cell applications

NASA Astrophysics Data System (ADS)

Ventrapragada, Lakshman; Zhu, Jingyi; Karakaya, Mehmet; Podila, Ramakrishna; Rao, Apparao; Clemson Nanomaterials center Team

Carbon nanotubes (CNTs) have become a key player in the design of materials for energy applications. They gained their popularity in industrial and scientific research due to their unique properties like excellent conductivity, high surface area, etc. Here we used chemical vapor deposition (CVD) to synthesize two types of CNTs namely, helically coiled CNTs and vertically aligned CNTs. These CNTs were subsequently used to make composites with conducting polymers and metal nanoparticles. One pot electrochemical synthesis was designed to electropolymerize aniline, pyrrole etc. on the surface of the electrode with simultaneous deposition of platinum and gold metal nanoparticles, and CNTs in the polymer matrix. The as synthesized composite materials were characterized with scanning electron microscope for surface morphology and spectroscopic techniques like Raman, UV-Vis for functionality. These were used to study electrocatalytic oxidation of methanol and ethanol for alkaline fuel cell applications. Electrodes fabricated from these composites not only showed good kinetics but also exhibited excellent stability. Uniqueness of this composite lies in its simple two step synthesis and it doesn't involve any surfactants unlike conventional chemical synthesis routes.

Ketide Synthase (KS) Domain Prediction and Analysis of Iterative Type II PKS Gene in Marine Sponge-Associated Actinobacteria Producing Biosurfactants and Antimicrobial Agents

PubMed Central

Selvin, Joseph; Sathiyanarayanan, Ganesan; Lipton, Anuj N.; Al-Dhabi, Naif Abdullah; Valan Arasu, Mariadhas; Kiran, George S.

2016-01-01

The important biological macromolecules, such as lipopeptide and glycolipid biosurfactant producing marine actinobacteria were analyzed and their potential linkage between type II polyketide synthase (PKS) genes was explored. A unique feature of type II PKS genes is their high amino acid (AA) sequence homology and conserved gene organization. These enzymes mediate the biosynthesis of polyketide natural products with enormous structural complexity and chemical nature by combinatorial use of various domains. Therefore, deciphering the order of AA sequence encoded by PKS domains tailored the chemical structure of polyketide analogs still remains a great challenge. The present work deals with an in vitro and in silico analysis of PKS type II genes from five actinobacterial species to correlate KS domain architecture and structural features. Our present analysis reveals the unique protein domain organization of iterative type II PKS and KS domain of marine actinobacteria. The findings of this study would have implications in metabolic pathway reconstruction and design of semi-synthetic genomes to achieve rational design of novel natural products. PMID:26903957

Applications of mixed-methods methodology in clinical pharmacy research.

PubMed

Hadi, Muhammad Abdul; Closs, S José

2016-06-01

Introduction Mixed-methods methodology, as the name suggests refers to mixing of elements of both qualitative and quantitative methodologies in a single study. In the past decade, mixed-methods methodology has gained popularity among healthcare researchers as it promises to bring together the strengths of both qualitative and quantitative approaches. Methodology A number of mixed-methods designs are available in the literature and the four most commonly used designs in healthcare research are: the convergent parallel design, the embedded design, the exploratory design, and the explanatory design. Each has its own unique advantages, challenges and procedures and selection of a particular design should be guided by the research question. Guidance on designing, conducting and reporting mixed-methods research is available in the literature, so it is advisable to adhere to this to ensure methodological rigour. When to use it is best suited when the research questions require: triangulating findings from different methodologies to explain a single phenomenon; clarifying the results of one method using another method; informing the design of one method based on the findings of another method, development of a scale/questionnaire and answering different research questions within a single study. Two case studies have been presented to illustrate possible applications of mixed-methods methodology. Limitations Possessing the necessary knowledge and skills to undertake qualitative and quantitative data collection, analysis, interpretation and integration remains the biggest challenge for researchers conducting mixed-methods studies. Sequential study designs are often time consuming, being in two (or more) phases whereas concurrent study designs may require more than one data collector to collect both qualitative and quantitative data at the same time.

Uncertainty management in intelligent design aiding systems

NASA Technical Reports Server (NTRS)

Brown, Donald E.; Gabbert, Paula S.

1988-01-01

A novel approach to uncertainty management which is particularly effective in intelligent design aiding systems for large-scale systems is presented. The use of this approach in the materials handling system design domain is discussed. It is noted that, during any point in the design process, a point value can be obtained for the evaluation of feasible designs; however, the techniques described provide unique solutions for these point values using only the current information about the design environment.

Predictive Design of Interfacial Functionality in Polymer Matrix Composites

DTIC Science & Technology

2017-05-24

structural design criteria. Due to the poor accessibility of interfaces by experimental means, little is known about the molecular definition, defect...is designed to allow for concurrent light scattering measurements, which establishes a unique experimental resource. We were able to leverage this...AFRL-AFOSR-VA-TR-2017-0103 Predictive Design of Interfacial Functionality in Polymer Matrix Composites John Kieffer UNIVERSITY OF MICHIGAN 503

Clinic-based nutrition and lifestyle counseling for Hispanic women delivered by community health workers: design of the California WISEWOMAN study.

PubMed

Farrell, Maureen A; Hayashi, Toshi; Loo, Ryan K; Rocha, David A; Sanders, Charlene; Hernandez, Marianne; Will, Julie C

2009-05-01

The Well-Integrated Screening and Evaluation for Women Across the Nation (WISEWOMAN) program in California, named Heart of the Family, implements and evaluates the effectiveness of lifestyle interventions to improve nutrition and physical activity while reducing cardiovascular disease (CVD) risk factors among low-income, uninsured or underinsured Hispanic women aged 40-64 who participate in the Cancer Detection Programs: Every Woman Counts (CDP:EWP). This paper reports the study design and baseline findings of the California WISEWOMAN program. Heart of the Family, a within-site randomized controlled study at four community health centers in Los Angeles and San Diego, featured a unique set of strategies meeting the state population in implementing a California WISEWOMAN program. The program exclusively targeted Hispanic women who are at risk of developing CVD, provided lifestyle intervention using a validated intervention material in Spanish and English to motivate behavioral changes, and used bilingual (English and Spanish) community health workers (CHWs) to provide individually based face-to-face counseling. Women meeting enrollment criteria were randomly assigned either to an enhanced intervention group (EIG), who received lifestyle intervention, or usual care group (UCG), who received the usual care for elevated blood pressure or cholesterol. A total of 1093 women enrolled between January 2006 and August 2006. Demographic and baseline CVD risk profiles are similar in both groups. Some notable characteristics of the California participants are lower smoking rate (5%), higher average body mass index (BMI) (31.9), and a significantly higher percentage with less than high school education (70%). With its unique study design and large number of enrolls, Heart of the Family will enable future public health efforts to better meet the health needs of Hispanic women by addressing education levels, economic considerations, and cultural and linguistic needs.

Rapid plant diversity assessment using a pixel nested plot design: A case study in Beaver Meadows, Rocky Mountain National Park, Colorado, USA

USGS Publications Warehouse

Kalkhan, M.A.; Stafford, E.J.; Stohlgren, T.J.

2007-01-01

Geospatial statistical modelling and thematic maps have recently emerged as effective tools for the management of natural areas at the landscape scale. Traditional methods for the collection of field data pertaining to questions of landscape were developed without consideration for the parameters of these applications. We introduce an alternative field sampling design based on smaller unbiased random plot and subplot locations called the pixel nested plot (PNP). We demonstrate the applicability of the PNP design of 15 m x 15 m to assess patterns of plant diversity and species richness across the landscape at Rocky Mountain National Park (RMNP), Colorado, USA in a time (cost)-efficient manner for field data collection. Our results produced comparable results to a previous study in the Beaver Meadow study (BMS) area within RMNP, where there was a demonstrated focus of plant diversity. Our study used the smaller PNP sampling design for field data collection which could be linked to geospatial information data and could be used for landscape-scale analyses and assessment applications. In 2003, we established 61 PNP in the eastern region of RMNP. We present a comparison between this approach using a sub-sample of 19 PNP from this data set and 20 of Modified Whittaker nested plots (MWNP) of 20 m x 50 m that were collected in the BMS area. The PNP captured 266 unique plant species while the MWNP captured 275 unique species. Based on a comparison of PNP and MWNP in the Beaver Meadows area, RMNP, the PNP required less time and area sampled to achieve a similar number of species sampled. Using the PNP approach for data collection can facilitate the ecological monitoring of these vulnerable areas at the landscape scale in a time- and therefore cost-effective manner. ?? 2007 The Authors.

Environmental design implications for two deep space SmallSats

NASA Astrophysics Data System (ADS)

Kahn, Peter; Imken, Travis; Elliott, John; Sherwood, Brent; Frick, Andreas; Sheldon, Douglas; Lunine, Jonathan

2017-10-01

The extreme environmental challenges of deep space exploration force unique solutions to small satellite design in order to enable their use as scientifically viable spacecraft. The challenges of implementing small satellites within limited resources can be daunting when faced with radiation effects on delicate electronics that require shielding or unique adaptations for protection, or mass, power and volume limitations due to constraints placed by the carrier spacecraft, or even Planetary Protection compliant design techniques that drive assembly and testing. This paper will explore two concept studies where the environmental constraints and/or planetary protection mitigations drove the design of the Flight System. The paper will describe the key technical drivers on the Sylph mission concept to explore a plume at Europa as a secondary free-flyer as a part of the planned Europa Mission. Sylph is a radiation-hardened smallsat concept that would utilize terrain relative navigation to fly at low altitudes through a plume, if found, and relay the mass spectra data back through the flyby spacecraft during its 24-h mission. The second topic to be discussed will be the mission design constraints of the Near Earth Asteroid (NEA) Scout concept. NEAScout is a 6U cubesat that would utilize an 86 sq. m solar sail as propulsion to execute a flyby with a near-Earth asteroid and help retire Strategic Knowledge Gaps for future human exploration. NEAScout would cruise for 24 months to reach and characterize one Near-Earth asteroid that is representative of Human Exploration targets and telemeter that data directly back to Earth at the end of its roughly 2.5 year mission.

Design review - A tool for all seasons.

NASA Technical Reports Server (NTRS)

Liberman, D. S.

1972-01-01

The origins of design review are considered together with questions of definitions. The main characteristics which distinguish the concept of design review discussed from the basic master-apprentice relationship include competence, objectivity, formality, and a systematic approach. Preliminary, major, and final reviews are the steps used in the management of the design and development process in each company. It is shown that the design review is generically a systems engineering milestone review with certain unique characteristics.

Evaluation of the educational impact of a special study module on maritime medicine for medical undergraduate students.

PubMed

McCarthy, Nora; O'Flynn, Siun; Murphy, John; Barry, David; Canals, Maria Luisa

2013-01-01

The hazardous occupation of seafaring brings many unique medical challenges. Despite its international nature, maritime medicine does not typically form a part of undergraduate medical studies. A unique and innovative, optional student-selected module (SSM) 'maritime medicine' was offered to medical students. A key objective was to develop students' attitudes to maritime medicine and increase their awareness of the discipline and its specialised nature. The aim of this study was to assess qualitatively and quantitatively the educational impact of the maritime medicine SSM and to improve the module content and design for future academic years. Students' perceived relevance and knowledge before and after the module was assessed using a Likert-based questionnaire. Comparison was made with controls in the post module100 multiple choice question (MCQ) paper. Qualitative feedback was obtained from semi-structured focus student discussion groups and the questionnaire's free comments section. A significant increase in perceived knowledge was seen between pre and post module p < 3.45 × 10-10, matched with the module students performing significantly better than controls in the end-of-module MCQ paper (p < 8.99 × 10-20). Qualitative analysis revealed 5 main themes: teaching methods, appreciation of non-academic instructors, appreciation of maritime medicine unique requirements, timetabling and enjoyment. This unique and innovative maritime medicine module harnessed local expertise and raised the awareness and profile of maritime medicine among undergraduate medical students. It was very well received and had a significant educational impact. Practical teaching methods were highly valued by students, with these areas also performing best in quantitative analysis.

Parental Expressivity and Parenting Styles in Chinese Families: Prospective and Unique Relations to Children’s Psychological Adjustment

PubMed Central

Chen, Stephen H.; Zhou, Qing; Eisenberg, Nancy; Valiente, Carlos; Wang, Yun

2012-01-01

SYNOPSIS Objectives Parents from different cultures differ in how frequently they express emotions. However, the generalizability of the relations between parental expressivity and child adjustment in non-Western cultures has not been extensively studied. The goal of the present study was to investigate prospective relations between parental expressivity within the family (positive, negative dominant, and negative submissive expressivity) and Chinese children’s psychological adjustment, above and beyond parenting styles. Design The study used two waves (3.8 years apart) of longitudinal data from a sample (n= 425) of children in Beijing (mean ages = 7.7 years at T1 and 11.6 years at T2). Parental expressivity and parenting styles were self-reported. To reduce the potential measurement overlap, items that tap parental expression of emotions toward the child were removed from the parenting style measure. Children’s adjustment was measured with parents’, teachers’, and peers’ or children’s reports. Results Consistent with findings with European American samples, parental negative dominant expressivity uniquely and positively predicted Chinese children’s externalizing problems controlling for prior externalizing problems, parenting styles, and family SES. Neither parental expressivity nor parenting styles uniquely predicted social competence. Conclusions Despite previously reported cultural differences in the mean levels of parental expressivity, some of the socialization functions of parental expressivity found in Western countries can be generalized to Chinese families. Although parental expressivity and parenting styles are related constructs, their unique relations to child’s adjustment suggest that they should be examined as distinct processes. PMID:23226715

The UARS and open data concept and analysis study. [upper atmosphere

NASA Technical Reports Server (NTRS)

Mittal, M.; Nebb, J.; Woodward, H.

1983-01-01

Alternative concepts for a common design for the UARS and OPEN Central Data Handling Facility (CDHF) are offered. Costs for alternative implementations of the UARS designs are presented, showing that the system design does not restrict the implementation to a single manufacturer. Processing demands on the alternative UARS CDHF implementations are then discussed. With this information at hand together with estimates for OPEN processing demands, it is shown that any shortfall in system capability for OPEN support can be remedied by either component upgrades or array processing attachments rather than a system redesign. In addition to a common system design, it is shown that there is significant potential for common software design, especially in the areas of data management software and non-user-unique production software. Archiving the CDHF data are discussed. Following that, cost examples for several modes of communications between the CDHF and Remote User Facilities are presented. Technology application is discussed.

A Different Perspective of the Teaching Philosophy of RL Moore

ERIC Educational Resources Information Center

Jones, Stephen L.

2017-01-01

Dr RL Moore was undoubtedly one of the finest mathematics teachers ever. He developed a unique teaching method designed to teach his students to think like mathematicians. His method was not designed to convey any particular mathematical knowledge. Instead, it was designed to teach his students to think. Today, his method has been modified to…

A Unique Design for High-Impact Safety and Awareness Training

ERIC Educational Resources Information Center

Calandra, Brendan; Harmon, Stephen W.

2012-01-01

The authors were asked to design and develop a large-scale, web-based learning environment that would effectively assist international aid workers in conducting their daily tasks in the field, at home and in the office in a safer and more secure fashion. The design, development and dissemination of the training needed to be done quickly,…

Universal Design for Learning: Cognitive Theory into Practice for Facilitating Comprehension in Early Literacy

ERIC Educational Resources Information Center

Brand, Susan Trostle; Dalton, Elizabeth M.

2012-01-01

Addressing the unique needs of children of all ages and abilities, Universal Design for Learning (UDL) is gaining momentum in schools and preschools around the nation and the globe. This article explores Universal Design for Learning and its promising applications to a variety of reading and language arts experiences in the Early Childhood…

Learning Compositional Simulation Models

DTIC Science & Technology

2010-01-01

techniques developed by social scientists, economists, and medical researchers over the past four decades. Quasi-experimental designs (QEDs) are...statistical techniques from the social sciences known as quasi- experimental design (QED). QEDs allow a researcher to exploit unique characteristics...can be grouped under the rubric “quasi-experimental design ” (QED), and they attempt to exploit inherent characteristics of observational data sets

Embodiments of Human Identity: Detecting and Interpreting Hidden Narratives in Twentieth-Century Design History.

ERIC Educational Resources Information Center

Williamson, Jack

1995-01-01

Argues that the practice and influence of design history can benefit from new forms of visual and chronological analysis. Identifies and discusses a unique phenomenon, the "historical visual narrative." Examines special instances of this phenomenon in twentieth-century design and visual culture, which are tied to the theme of the…

Ultrasound comparison of external and internal neck anatomy with the LMA Unique.

PubMed

Lee, Steven M; Wojtczak, Jacek A; Cattano, Davide

2017-12-01

Internal neck anatomy landmarks and their relation after placement of an extraglottic airway devices have not been studied extensively by the use of ultrasound. Based on our group experience with external landmarks as well as internal landmarks evaluation with other techniques, we aimed use ultrasound to analyze the internal neck anatomy landmarks and the related changes due to the placement of the Laryngeal Mask Airway Unique. Observational pilot investigation. Non-obese adult patients with no evidence of airway anomalies, were recruited. External neck landmarks were measured based on a validated and standardized method by tape. Eight internal anatomical landmarks, reciprocal by the investigational hypothesis to the external landmarks, were also measured by ultrasound guidance. The internal landmarks were re-measured after optimal placement and inflation of the extraglottic airway devices cuff Laryngeal Mask Airway Unique. Six subjects were recruited. Ultrasound measurements of hyoid-mental distance, thyroid-cricoid distance, thyroid height, and thyroid width were found to be significantly ( p < 0.05) overestimated using a tape measure. Sagittal neck landmark distances such as thyroid height, sternal-mental distance, and thyroid-cricoid distance significantly decreased after placement of the Laryngeal Mask Airway Unique. The laryngeal mask airway Unique resulted in significant changes in internal neck anatomy. The induced changes and respective specific internal neck anatomy landmarks could help to design devices that would modify their shape accordingly to areas of greatest displacement. Also, while external neck landmark measurements overestimate their respective internal neck landmarks, as we previously reported, the concordance of each measurement and their respective conversion factor could continue to be of help in sizing extraglottic airway devices. Due to the pilot nature of the study, more investigations are warranted.

40 CFR 86.1803-01 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Auxiliary Emission Control Device (AECD) means any element of design which senses temperature, vehicle speed.... Critical emission-related components are those components which are designed primarily for emission control... control system is a unique group of emission control devices, auxiliary emission control devices, engine...

PARIS II: DESIGNING GREENER SOLVENTS

EPA Science Inventory

PARIS II (the program for assisting the replacement of industrial solvents, version II), developed at the USEPA, is a unique software tool that can be used for customizing the design of replacement solvents and for the formulation of new solvents. This program helps users avoid ...

Defining Operational Space Suit Requirements for Commercial Orbital Spaceflight

NASA Technical Reports Server (NTRS)

Alpert, Brian K.

2015-01-01

As the commercial spaceflight industry transitions from suborbital brevity to orbital outposts, spacewalking will become a major consideration for tourists, scientists, and hardware providers. The challenge exists to develop a space suit designed for the orbital commercial spaceflight industry. The unique needs and requirements of this industry will drive space suit designs and costs that are unlike any existing product. Commercial space tourists will pay for the experience of a lifetime, while scientists may not be able to rely on robotics for all operations and external hardware repairs. This study was aimed at defining space suit operational and functional needs across the spectrum of spacewalk elements, identifying technical design drivers and establishing appropriate options. Recommendations from the analysis are offered for consideration

Study on utilization of advanced composites in commercial aircraft wing structures. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Sakata, I. F.; Ostrom, R. B.; Cardinale, S. V.

1978-01-01

The effort required by commercial transport manufacturers to accomplish the transition from current construction materials and practices to extensive use of composites in aircraft wings was investigated. The engineering and manufacturing disciplines which normally participate in the design, development, and production of an aircraft were employed to ensure that all of the factors that would enter a decision to commit to production of a composite wing structure were addressed. A conceptual design of an advanced technology reduced energy aircraft provided the framework for identifying and investigating unique design aspects. A plan development effort defined the essential technology needs and formulated approaches for effecting the required wing development. The wing development program plans, resource needs, and recommendations are summarized.

Unique Non-Keplerian Orbit Vantage Locations for Sun-Earth Connection and Earth Science Vision Roadmaps

NASA Technical Reports Server (NTRS)

Folta, David; Young, Corissa; Ross, Adam

2001-01-01

The purpose of this investigation is to determine the feasibility of attaining and maintaining unique non-Keplerian orbit vantage locations in the Earth/Moon environment in order to obtain continuous scientific measurements. The principal difficulty associated with obtaining continuous measurements is the temporal nature of astrodynamics, i.e., classical orbits. This investigation demonstrates advanced trajectory designs to meet demanding science requirements which cannot be met following traditional orbital mechanic logic. Examples of continuous observer missions addressed include Earth pole-sitters and unique vertical libration orbits that address Sun-Earth Connection and Earth Science Vision roadmaps.

On the Development of a Unique Arc Jet Test Apparatus for Control Surface Seal Evaluations

NASA Technical Reports Server (NTRS)

Finkbeiner, Joshua R.; Dunlap, Patrick H., Jr.; Steinetz, Bruce M.; Robbie, Malcolm; Baker, Gus; Erker, Arthur

2004-01-01

NASA Glenn has developed a unique test apparatus capable of evaluating control surface seal and flap designs under simulated reentry heating conditions in NASA Johnson's arc jet test facility. The test apparatus is capable of testing a variety of seal designs with a variety of control surface materials and designs using modular components. The flap angle can be varied during testing, allowing modification of the seal environment while testing is in progress. The flap angle is varied using an innovative transmission system which limits heat transfer from the hot flap structure to the motor, all while keeping the components properly aligned regardless of thermal expansion. A combination of active and passive cooling is employed to prevent thermal damage to the test fixture while still obtaining the target seal temperature.

Building and measuring a high performance network architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, William T.C.; Toole, Timothy; Fisher, Chuck

2001-04-20

Once a year, the SC conferences present a unique opportunity to create and build one of the most complex and highest performance networks in the world. At SC2000, large-scale and complex local and wide area networking connections were demonstrated, including large-scale distributed applications running on different architectures. This project was designed to use the unique opportunity presented at SC2000 to create a testbed network environment and then use that network to demonstrate and evaluate high performance computational and communication applications. This testbed was designed to incorporate many interoperable systems and services and was designed for measurement from the very beginning.more » The end results were key insights into how to use novel, high performance networking technologies and to accumulate measurements that will give insights into the networks of the future.« less

Spatial information is processed even when it is task-irrelevant: implications for neuroimaging task design.

PubMed

Meegan, Daniel V; Honsberger, Michael J M

2005-05-01

Many neuroimaging studies have been designed to differentiate domain-specific processes in the brain. A common design constraint is to use identical stimuli for different domain-specific tasks. For example, an experiment investigating spatial versus identity processing would present compound spatial-identity stimuli in both spatial and identity tasks, and participants would be instructed to attend to, encode, maintain, or retrieve spatial information in the spatial task, and identity information in the identity task. An assumption in such studies is that spatial information will not be processed in the identity task, as it is irrelevant for that task. We report three experiments demonstrating violations of this assumption. Our results suggest that comparisons of spatial and identity tasks in existing neuroimaging studies have underestimated the amount of brain activation that is spatial-specific. For future neuroimaging studies, we recommend unique stimulus displays for each domain-specific task, and event-related measurement of post-stimulus processing.

Validation of intellectual disability coding through hospital morbidity records using an intellectual disability population-based database in Western Australia

PubMed Central

Bourke, Jenny; Wong, Kingsley

2018-01-01

Objectives To investigate how well intellectual disability (ID) can be ascertained using hospital morbidity data compared with a population-based data source. Design, setting and participants All children born in 1983–2010 with a hospital admission in the Western Australian Hospital Morbidity Data System (HMDS) were linked with the Western Australian Intellectual Disability Exploring Answers (IDEA) database. The International Classification of Diseases hospital codes consistent with ID were also identified. Main outcome measures The characteristics of those children identified with ID through either or both sources were investigated. Results Of the 488 905 individuals in the study, 10 218 (2.1%) were identified with ID in either IDEA or HMDS with 1435 (14.0%) individuals identified in both databases, 8305 (81.3%) unique to the IDEA database and 478 (4.7%) unique to the HMDS dataset only. Of those unique to the HMDS dataset, about a quarter (n=124) had died before 1 year of age and most of these (75%) before 1 month. Children with ID who were also coded as such in the HMDS data were more likely to be aged under 1 year, female, non-Aboriginal and have a severe level of ID, compared with those not coded in the HMDS data. The sensitivity of using HMDS to identify ID was 14.7%, whereas the specificity was much higher at 99.9%. Conclusion Hospital morbidity data are not a reliable source for identifying ID within a population, and epidemiological researchers need to take these findings into account in their study design. PMID:29362262

Methodological and clinical implications of a three-in-one Russian doll design for tracking health trajectories and improving health and function through innovative exercise treatments in adults with disability.

PubMed

Rimmer, James H; Herman, Cassandra; Wingo, Brooks; Fontaine, Kevin; Mehta, Tapan

2018-03-14

Hybrid research designs targeting adults with neurologic disability are critical for improving the efficiency of models that can identify, track and intervene on identified health issues. Our Russian doll framework encompasses three study phases. Phase 1 involves prospectively following a cohort of participants with disability to examine the relationships between rates of health and functional deficits (e.g., pain, fatigue, deconditioning), functional measures (e.g., cardiorespiratory endurance, strength, balance), and environmental and sociocultural factors. In Phase 2, eligible participants with neurologic disability from Phase 1 (in our example, individuals with multiple sclerosis) are screened and randomized to a clinical exercise efficacy trial. In Phase 3, study participants are enrolled in a home-based teleexercise trial to test the feasibility and replicability of delivering the clinical exercise study in the home. This unique three-in-one Russian doll framework serves as a foundation for informing and guiding researchers and clinicians in treating certain health and functional deficits in people with neurologic disability using exercise as a primary treatment modality in both the clinical and home settings. It offers a unique perspective for understanding the critical issues of functioning, health maintenance and quality of life for people with neurologic disability across a longitudinal framework. Study 2 ClinicalTrials.gov identifier NCT02533882 (retroactively registered 03/06/2015). Study 3 ClinicalTrials.gov identifier NCT03108950 (retroactively registered 04/05/2017).

Tissue-like Neural Probes for Understanding and Modulating the Brain.

PubMed

Hong, Guosong; Viveros, Robert D; Zwang, Theodore J; Yang, Xiao; Lieber, Charles M

2018-03-19

Electrophysiology tools have contributed substantially to understanding brain function, yet the capabilities of conventional electrophysiology probes have remained limited in key ways because of large structural and mechanical mismatches with respect to neural tissue. In this Perspective, we discuss how the general goal of probe design in biochemistry, that the probe or label have a minimal impact on the properties and function of the system being studied, can be realized by minimizing structural, mechanical, and topological differences between neural probes and brain tissue, thus leading to a new paradigm of tissue-like mesh electronics. The unique properties and capabilities of the tissue-like mesh electronics as well as future opportunities are summarized. First, we discuss the design of an ultraflexible and open mesh structure of electronics that is tissue-like and can be delivered in the brain via minimally invasive syringe injection like molecular and macromolecular pharmaceuticals. Second, we describe the unprecedented tissue healing without chronic immune response that leads to seamless three-dimensional integration with a natural distribution of neurons and other key cells through these tissue-like probes. These unique characteristics lead to unmatched stable long-term, multiplexed mapping and modulation of neural circuits at the single-neuron level on a year time scale. Last, we offer insights on several exciting future directions for the tissue-like electronics paradigm that capitalize on their unique properties to explore biochemical interactions and signaling in a "natural" brain environment.

Personality disorder risk factors for suicide attempts over 10 years of follow-up.

PubMed

Ansell, Emily B; Wright, Aidan G C; Markowitz, John C; Sanislow, Charles A; Hopwood, Christopher J; Zanarini, Mary C; Yen, Shirley; Pinto, Anthony; McGlashan, Thomas H; Grilo, Carlos M

2015-04-01

Identifying personality disorder (PD) risk factors for suicide attempts is an important consideration for research and clinical care alike. However, most prior research has focused on single PDs or categorical PD diagnoses without considering unique influences of different PDs or of severity (sum) of PD criteria on the risk for suicide-related outcomes. This has usually been done with cross-sectional or retrospective assessment methods. Rarely are dimensional models of PDs examined in longitudinal, naturalistic prospective designs. In addition, it is important to consider divergent risk factors in predicting the risk of ever making a suicide attempt versus the risk of making an increasing number of attempts within the same model. This study examined 431 participants who were followed for 10 years in the Collaborative Longitudinal Personality Disorders Study. Baseline assessments of personality disorder criteria were summed as dimensional counts of personality pathology and examined as predictors of suicide attempts reported at annual interviews throughout the 10-year follow-up period. We used univariate and multivariate zero-inflated Poisson regression models to simultaneously evaluate PD risk factors for ever attempting suicide and for increasing numbers of attempts among attempters. Consistent with prior research, borderline PD was uniquely associated with ever attempting. However, only narcissistic PD was uniquely associated with an increasing number of attempts. These findings highlight the relevance of both borderline and narcissistic personality pathology as unique contributors to suicide-related outcomes. (c) 2015 APA, all rights reserved).

The Effectiveness of Teamwork Training on Teamwork Behaviors and Team Performance: A Systematic Review and Meta-Analysis of Controlled Interventions

PubMed Central

McEwan, Desmond; Ruissen, Geralyn R.; Eys, Mark A.; Zumbo, Bruno D.; Beauchamp, Mark R.

2017-01-01

The objective of this study was to conduct a systematic review and meta-analysis of teamwork interventions that were carried out with the purpose of improving teamwork and team performance, using controlled experimental designs. A literature search returned 16,849 unique articles. The meta-analysis was ultimately conducted on 51 articles, comprising 72 (k) unique interventions, 194 effect sizes, and 8439 participants, using a random effects model. Positive and significant medium-sized effects were found for teamwork interventions on both teamwork and team performance. Moderator analyses were also conducted, which generally revealed positive and significant effects with respect to several sample, intervention, and measurement characteristics. Implications for effective teamwork interventions as well as considerations for future research are discussed. PMID:28085922

Bayesian Approach for Reliability Assessment of Sunshield Deployment on JWST

NASA Technical Reports Server (NTRS)

Kaminskiy, Mark P.; Evans, John W.; Gallo, Luis D.

2013-01-01

Deployable subsystems are essential to mission success of most spacecraft. These subsystems enable critical functions including power, communications and thermal control. The loss of any of these functions will generally result in loss of the mission. These subsystems and their components often consist of unique designs and applications, for which various standardized data sources are not applicable for estimating reliability and for assessing risks. In this study, a Bayesian approach for reliability estimation of spacecraft deployment was developed for this purpose. This approach was then applied to the James Webb Space Telescope (JWST) Sunshield subsystem, a unique design intended for thermal control of the observatory's telescope and science instruments. In order to collect the prior information on deployable systems, detailed studies of "heritage information", were conducted extending over 45 years of spacecraft launches. The NASA Goddard Space Flight Center (GSFC) Spacecraft Operational Anomaly and Reporting System (SOARS) data were then used to estimate the parameters of the conjugative beta prior distribution for anomaly and failure occurrence, as the most consistent set of available data and that could be matched to launch histories. This allows for an emperical Bayesian prediction for the risk of an anomaly occurrence of the complex Sunshield deployment, with credibility limits, using prior deployment data and test information.

A Bayesian Framework for Reliability Analysis of Spacecraft Deployments

NASA Technical Reports Server (NTRS)

Evans, John W.; Gallo, Luis; Kaminsky, Mark

2012-01-01

Deployable subsystems are essential to mission success of most spacecraft. These subsystems enable critical functions including power, communications and thermal control. The loss of any of these functions will generally result in loss of the mission. These subsystems and their components often consist of unique designs and applications for which various standardized data sources are not applicable for estimating reliability and for assessing risks. In this study, a two stage sequential Bayesian framework for reliability estimation of spacecraft deployment was developed for this purpose. This process was then applied to the James Webb Space Telescope (JWST) Sunshield subsystem, a unique design intended for thermal control of the Optical Telescope Element. Initially, detailed studies of NASA deployment history, "heritage information", were conducted, extending over 45 years of spacecraft launches. This information was then coupled to a non-informative prior and a binomial likelihood function to create a posterior distribution for deployments of various subsystems uSing Monte Carlo Markov Chain sampling. Select distributions were then coupled to a subsequent analysis, using test data and anomaly occurrences on successive ground test deployments of scale model test articles of JWST hardware, to update the NASA heritage data. This allowed for a realistic prediction for the reliability of the complex Sunshield deployment, with credibility limits, within this two stage Bayesian framework.

Design features of a low-disturbance supersonic wind tunnel for transition research at low supersonic Mach numbers

NASA Technical Reports Server (NTRS)

Wolf, Stephen W. D.; Laub, James A.; King, Lyndell S.; Reda, Daniel C.

1992-01-01

A unique, low-disturbance supersonic wind tunnel is being developed at NASA-Ames to support supersonic laminar flow control research at cruise Mach numbers of the High Speed Civil Transport (HSCT). The distinctive design features of this new quiet tunnel are a low-disturbance settling chamber, laminar boundary layers along the nozzle/test section walls, and steady supersonic diffuser flow. This paper discusses these important aspects of our quiet tunnel design and the studies necessary to support this design. Experimental results from an 1/8th-scale pilot supersonic wind tunnel are presented and discussed in association with theoretical predictions. Natural laminar flow on the test section walls is demonstrated and both settling chamber and supersonic diffuser performance is examined. The full-scale wind tunnel should be commissioned by the end of 1993.

Addressing Unison and Uniqueness of Reliability and Safety for Better Integration

NASA Technical Reports Server (NTRS)

Huang, Zhaofeng; Safie, Fayssal

2015-01-01

For a long time, both in theory and in practice, safety and reliability have not been clearly differentiated, which leads to confusion, inefficiency, and sometime counter-productive practices in executing each of these two disciplines. It is imperative to address the uniqueness and the unison of these two disciplines to help both disciplines become more effective and to promote a better integration of the two for enhancing safety and reliability in our products as an overall objective. There are two purposes of this paper. First, it will investigate the uniqueness and unison of each discipline and discuss the interrelationship between the two for awareness and clarification. Second, after clearly understanding the unique roles and interrelationship between the two in a product design and development life cycle, we offer suggestions to enhance the disciplines with distinguished and focused roles, to better integrate the two, and to improve unique sets of skills and tools of reliability and safety processes. From the uniqueness aspect, the paper identifies and discusses the respective uniqueness of reliability and safety from their roles, accountability, nature of requirements, technical scopes, detailed technical approaches, and analysis boundaries. It is misleading to equate unreliable to unsafe, since a safety hazard may or may not be related to the component, sub-system, or system functions, which are primarily what reliability addresses. Similarly, failing-to-function may or may not lead to hazard events. Examples will be given in the paper from aerospace, defense, and consumer products to illustrate the uniqueness and differences between reliability and safety. From the unison aspect, the paper discusses what the commonalities between reliability and safety are, and how these two disciplines are linked, integrated, and supplemented with each other to accomplish the customer requirements and product goals. In addition to understanding the uniqueness in reliability and safety, a better understanding of unison and commonalities will further help in understanding the interaction between reliability and safety. This paper discusses the unison and uniqueness of reliability and safety. It presents some suggestions for better integration of the two disciplines in terms of technical approaches, tools, techniques, and skills to enhance the role of reliability and safety in supporting a product design and development life cycle. The paper also discusses eliminating the redundant effort and minimizing the overlap of reliability and safety analyses for an efficient implementation of the two disciplines.

Therapeutic assessment for preadolescent boys with oppositional defiant disorder: a replicated single-case time-series design.

PubMed

Smith, Justin D; Handler, Leonard; Nash, Michael R

2010-09-01

The Therapeutic Assessment (TA) model is a relatively new treatment approach that fuses assessment and psychotherapy. The study examines the efficacy of this model with preadolescent boys with oppositional defiant disorder and their families. A replicated single-case time-series design with daily measures is used to assess the effects of TA and to track the process of change as it unfolds. All 3 families benefitted from participation in TA across multiple domains of functioning, but the way in which change unfolded was unique for each family. These findings are substantiated by the Behavior Assessment System for Children (Reynolds & Kamphaus, 2004). The TA model is shown to be an effective treatment for preadolescent boys with oppositional defiant disorder and their families. Further, the time-series design of this study illustrated how this empirically grounded case-based methodology reveals when and how change unfolds during treatment in a way that is usually not possible with other research designs.

Architecture earth-sheltered buildings: Design Manual 1.4

NASA Astrophysics Data System (ADS)

1984-03-01

Design guidance is presented for use by experienced engineers and architects. The types of buildings within the scope of this manual include slab-on-grade, partially-buried (bermed) or fully-buried, and large (single-story or multistory) structures. New criteria unique to earth-sheltered design are included for the following disciplines: Planning, Landscape Design, Life-Cycle Analysis, Architectural, Structural, Mechanical (criteria include below-grade heat flux calculation procedures), and Electrical.

49 CFR 214.7 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Designed to be applied, secured, uniquely tagged and removed only by the class, craft or group of employees... to perform any of the duties defined in this part. Equivalent means alternative designs, materials... authorized to take prompt corrective measures to eliminate them. Control operator means the railroad employee...

Practical application of AMLCDs for tactical fighter aircraft

NASA Astrophysics Data System (ADS)

McClaskey, Paul; Craddock, Roger

1995-06-01

Development and testing of an AMLCD-display to replace a dichroic display in a fighter aircraft environment has presented a unique set of technical challenges. This paper addresses design concepts used on the Engine Fuel Display and proposes design guidelines generally applicable for AMLCD projects.

Additively Manufactured Combustion Devices Components for LOX/Methane Applications

NASA Technical Reports Server (NTRS)

Greene, Sandra Elam; Protz, Christopher; Garcia, Chance; Goodman, Dwight; Baker, Kevin

2016-01-01

Marshall Space Flight Center (MSFC) has designed, fabricated, and hot-fire tested a variety of successful injectors, chambers, and igniters for potential liquid oxygen (LOX) and methane (CH4) systems since 2005. The most recent efforts have focused on components with additive manufacturing (AM) to include unique design features, minimize joints, and reduce final machining efforts. Inconel and copper alloys have been used with AM processes to produce a swirl coaxial injector and multiple methane cooled thrust chambers. The initial chambers included unique thermocouple ports for measuring local coolant channel temperatures along the length of the chamber. Results from hot-fire testing were used to anchor thermal models and generate a regeneratively cooled thruster for a 4,000 lbf LOX/CH4 engine. The completed thruster will be hot-fire tested in the summer of 2016 at MSFC. The thruster design can also be easily scaled and used on a 25,000 lbf engine. To further support the larger engine design, an AM gas generator injector has been designed. Hot-fire testing on this injector is planned for the summer of 2016 at MSFC.

Prototype data terminal-multiplexer/demultiplexer

NASA Technical Reports Server (NTRS)

Leck, D. E.; Goodwin, J. E.

1972-01-01

The design and operation of a quad redundant data terminal and a multiplexer/demultiplexer (MDU) is described. The most unique feature is the design of the quad redundant data terminal. This is one of the few designs where the unit is fail/op, fail/op, fail/safe. Laboratory tests confirm that the unit will operate satisfactorily with the failure of three out of four channels. Although the design utilizes state-of-the-art technology, the waveform error checks, the voting techniques, and the parity bit checks are believed to be used in unique configurations. Correct word selection routines are also novel. The MDU design, while not redundant, utilizes, the latest state-of-the-art advantages of light coupler and interested amplifiers. Much of the technology employed was an evolution of prior NASA contracts related to the Addressable Time Division Data System. A good example of the earlier technology development was the development of a low level analog multiplexer, a high level analog multiplexer, and a digital multiplexer. A list of all drawings is included for reference and all schematic, block and timing diagrams are incorporated.

Bi-Axial Solar Array Drive Mechanism: Design, Build and Environmental Testing

NASA Technical Reports Server (NTRS)

Scheidegger, Noemy; Ferris, Mark; Phillips, Nigel

2014-01-01

The development of the Bi-Axial Solar Array Drive Mechanism (BSADM) presented in this paper is a demonstration of SSTL's unique space manufacturing approach that enables performing rapid development cycles for cost-effective products that meet ever-challenging mission requirements: The BSADM is designed to orient a solar array wing towards the sun, using its first rotation axis to track the sun, and its second rotation axis to compensate for the satellite orbit and attitude changes needed for a successful payload operation. The tight development schedule, with manufacture of 7 Flight Models within 1.5 year after kick-off, is offset by the risk-reduction of using qualified key component-families from other proven SSTL mechanisms. This allowed focusing the BSADM design activities on the mechanism features that are unique to the BSADM, and having an Engineering Qualification Model (EQM) built 8 months after kick-off. The EQM is currently undergoing a full environmental qualification test campaign. This paper presents the BSADM design approach that enabled meeting such a challenging schedule, its design particularities, and the ongoing verification activities.

Unique considerations in the design and experimental evaluation of tailored wings with elastically produced chordwise camber

NASA Technical Reports Server (NTRS)

Rehfield, Lawrence W.; Zischka, Peter J.; Fentress, Michael L.; Chang, Stephen

1992-01-01

Some of the unique considerations that are associated with the design and experimental evaluation of chordwise deformable wing structures are addressed. Since chordwise elastic camber deformations are desired and must be free to develop, traditional rib concepts and experimental methodology cannot be used. New rib design concepts are presented and discussed. An experimental methodology based upon the use of a flexible sling support and load application system has been created and utilized to evaluate a model box beam experimentally. Experimental data correlate extremely well with design analysis predictions based upon a beam model for the global properties of camber compliance and spanwise bending compliance. Local strain measurements exhibit trends in agreement with intuition and theory but depart slightly from theoretical perfection based upon beam-like behavior alone. It is conjectured that some additional refinement of experimental technique is needed to explain or eliminate these (minor) departures from asymmetric behavior of upper and lower box cover strains. Overall, a solid basis for the design of box structures based upon the bending method of elastic camber production has been confirmed by the experiments.

Design of a High Temperature Radiator for the Variable Specific Impulse Magnetoplasma Rocket

NASA Technical Reports Server (NTRS)

Sheth, Rubik B.; Ungar, Eugene K.; Chambliss, Joe P.

2012-01-01

The Variable Specific Impulse Magnetoplasma Rocket (VASIMR), currently under development by Ad Astra Rocket Company (Webster, TX), is a unique propulsion system that could change the way space propulsion is performed. VASIMR's efficiency, when compared to that of a conventional chemical rocket, reduces the propellant needed for exploration missions by a factor of 10. Currently plans include flight tests of a 200 kW VASIMR system, titled VF-200, on the International Space Station (ISS). The VF-200 will consist of two 100 kW thruster units packaged together in one engine bus. Each thruster core generates 27 kW of waste heat during its 15 minute firing time. The rocket core will be maintained between 283 and 573 K by a pumped thermal control loop. The design of a high temperature radiator is a unique challenge for the vehicle design. This paper will discuss the path taken to develop a steady state and transient-based radiator design. The paper will describe the radiator design option selected for the VASIMR thermal control system for use on ISS, and how the system relates to future exploration vehicles.

Spanking and child outcomes: Old controversies and new meta-analyses.

PubMed

Gershoff, Elizabeth T; Grogan-Kaylor, Andrew

2016-06-01

Whether spanking is helpful or harmful to children continues to be the source of considerable debate among both researchers and the public. This article addresses 2 persistent issues, namely whether effect sizes for spanking are distinct from those for physical abuse, and whether effect sizes for spanking are robust to study design differences. Meta-analyses focused specifically on spanking were conducted on a total of 111 unique effect sizes representing 160,927 children. Thirteen of 17 mean effect sizes were significantly different from zero and all indicated a link between spanking and increased risk for detrimental child outcomes. Effect sizes did not substantially differ between spanking and physical abuse or by study design characteristics. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

The design and development of a third generation OSEE instrument

NASA Technical Reports Server (NTRS)

Perey, D. F.; Yost, W. T.; Stone, F. D.; Welch, C. S.; Scales, E.; Gasser, E. S.; Joe, E.; Goodman, T.; Pascual, X.; Hefner, B.

1995-01-01

Optically Stimulated Electron Emission (OSEE) has been used to quantify surface contamination in the aerospace community. As advances are made towards the understanding of OSEE, it is desirable to incorporate technological advances with succeeding generations of instrumentation, so that improvements in the practical application of OSEE may be disseminated among the user community. Several studies undertaken by Yost, Welch, Abedin and others have expanded the knowledge base related to the underlying principles of OSEE. The conclusions of these studies, together with inputs from the user community were the foundation upon which the development of a third generation OSEE instrument was based. This manuscript describes the significant improvements incorporated into a third generation OSEE instrument as well as the elements unique to its design.

The National Institutes of Health's Biomedical Translational Research Information System (BTRIS): Design, Contents, Functionality and Experience to Date

PubMed Central

Cimino, James J.; Ayres, Elaine J.; Remennik, Lyubov; Rath, Sachi; Freedman, Robert; Beri, Andrea; Chen, Yang; Huser, Vojtech

2013-01-01

The US National Institutes of Health (NIH) has developed the Biomedical Translational Research Information System (BTRIS) to support researchers’ access to translational and clinical data. BTRIS includes a data repository, a set of programs for loading data from NIH electronic health records and research data management systems, an ontology for coding the disparate data with a single terminology, and a set of user interface tools that provide access to identified data from individual research studies and data across all studies from which individually identifiable data have been removed. This paper reports on unique design elements of the system, progress to date and user experience after five years of development and operation. PMID:24262893

A Sphere-Scanning Radiometer for Rapid Directional Measurements of Sky and Ground Radiance: the PARABOLA Field Instrument

NASA Technical Reports Server (NTRS)

Deering, D. W.; Leone, P.

1984-01-01

A unique field instrument, called the PARABOLA, a collapsable support boom, which is self contained and easily transportable to remote sites to enable the acquisition of radiance data for almost the complete (4 pi) sky and ground-looking hemispheres in only 11 seconds was designed. The PARABOLA samples in 15 deg instantaneous field of view sectors in three narrow bandpass spectral channels simultaneously. Field measurement on a variety of earth surface cover types using a truck boom, a specially designed pickup truck mounting system, and a hot air balloon were studied. The PARABOLA instrument has potential for climatological and other studies which require characterization of the distribution of diffuse solar radiation within the sky hemisphere.

A sphere-scanning radiometer for rapid directional measurements of sky and ground radiance: The PARABOLA field instrument

NASA Astrophysics Data System (ADS)

Deering, D. W.; Leone, P.

1984-11-01

A unique field instrument, called the PARABOLA, a collapsable support boom, which is self contained and easily transportable to remote sites to enable the acquisition of radiance data for almost the complete (4 pi) sky and ground-looking hemispheres in only 11 seconds was designed. The PARABOLA samples in 15 deg instantaneous field of view sectors in three narrow bandpass spectral channels simultaneously. Field measurement on a variety of earth surface cover types using a truck boom, a specially designed pickup truck mounting system, and a hot air balloon were studied. The PARABOLA instrument has potential for climatological and other studies which require characterization of the distribution of diffuse solar radiation within the sky hemisphere.

Effects of Flame Structure and Hydrodynamics on Soot Particle Inception and Flame Extinction in Diffusion Flames

NASA Technical Reports Server (NTRS)

Axelbaum, R. L.; Chen, R.; Sunderland, P. B.; Urban, D. L.; Liu, S.; Chao, B. H.

2001-01-01

This paper summarizes recent studies of the effects of stoichiometric mixture fraction (structure) and hydrodynamics on soot particle inception and flame extinction in diffusion flames. Microgravity experiments are uniquely suited for these studies because, unlike normal gravity experiments, they allow structural and hydrodynamic effects to be independently studied. As part of this recent flight definition program, microgravity studies have been performed in the 2.2 second drop tower. Normal gravity counterflow studies also have been employed and analytical and numerical models have been developed. A goal of this program is to develop sufficient understanding of the effects of flame structure that flames can be "designed" to specifications - consequently, the program name Flame Design. In other words, if a soot-free, strong, low temperature flame is required, can one produce such a flame by designing its structure? Certainly, as in any design, there will be constraints imposed by the properties of the available "materials." For hydrocarbon combustion, the base materials are fuel and air. Additives could be considered, but for this work only fuel, oxygen and nitrogen are considered. Also, the structure of these flames is "designed" by varying the stoichiometric mixture fraction. Following this line of reasoning, the studies described are aimed at developing the understanding of flame structure that is needed to allow for optimum design.

Evaluation of a nurse-designed mobile health education application to enhance knowledge of Pap testing.

PubMed

Christensen, Stacy

2014-01-01

An experimental study was conducted using a 2-group randomized control pretest/ posttest design to determine if knowledge about Pap testing could be increased through use of a nurse-designed mobile smartphone app developed to educate individuals about the Pap test. A 14-item pretest survey of knowledge about Pap tests was distributed to women attending a university in New England. Participants in the intervention group were provided with an Android device on which a digital health education application on Pap testing had been downloaded. The control group was given a standard pamphlet on Pap testing., Paired t test results demonstrated that knowledge scores on the posttest increased significantly in both groups, but were significantly higher in the intervention group. User satisfaction with the app was high. The results of this study may enhance nursing care by informing nurses about a unique way of learning about Pap testing to recommend to patients.

A Systems Engineering Approach to Architecture Development

NASA Technical Reports Server (NTRS)

Di Pietro, David A.

2014-01-01

Architecture development is conducted prior to system concept design when there is a need to determine the best-value mix of systems that works collectively in specific scenarios and time frames to accomplish a set of mission area objectives. While multiple architecture frameworks exist, they often require use of unique taxonomies and data structures. In contrast, this presentation characterizes architecture development using terminology widely understood within the systems engineering community. Using a notional civil space architecture example, it employs a multi-tier framework to describe the enterprise level architecture and illustrates how results of lower tier, mission area architectures integrate into the enterprise architecture. It also presents practices for conducting effective mission area architecture studies, including establishing the trade space, developing functions and metrics, evaluating the ability of potential design solutions to meet the required functions, and expediting study execution through the use of iterative design cycles.

A Systems Engineering Approach to Architecture Development

NASA Technical Reports Server (NTRS)

Di Pietro, David A.

2015-01-01

Architecture development is often conducted prior to system concept design when there is a need to determine the best-value mix of systems that works collectively in specific scenarios and time frames to accomplish a set of mission area objectives. While multiple architecture frameworks exist, they often require use of unique taxonomies and data structures. In contrast, this paper characterizes architecture development using terminology widely understood within the systems engineering community. Using a notional civil space architecture example, it employs a multi-tier framework to describe the enterprise level architecture and illustrates how results of lower tier, mission area architectures integrate into the enterprise architecture. It also presents practices for conducting effective mission area architecture studies, including establishing the trade space, developing functions and metrics, evaluating the ability of potential design solutions to meet the required functions, and expediting study execution through the use of iterative design cycles.

A Systems Engineering Approach to Architecture Development

NASA Technical Reports Server (NTRS)

Di Pietro, David A.

2015-01-01

Architecture development is often conducted prior to system concept design when there is a need to determine the best-value mix of systems that works collectively in specific scenarios and time frames to accomplish a set of mission area objectives. While multiple architecture frameworks exist, they often require use of unique taxonomies and data structures. In contrast, this paper characterizes architecture development using terminology widely understood within the systems engineering community. Using a notional civil space architecture example, it employs a multi-tier framework to describe the enterprise level architecture and illustrates how results of lower tier, mission area architectures integrate into the enterprise architecture. It also presents practices for conducting effective mission area architecture studies, including establishing the trade space, developing functions and metrics, evaluating the ability of potential design solutions to meet the required functions, and expediting study execution through the use of iterative design cycles

Unbonded prestressing tendons and their role in the construction of slender elements of buildings

NASA Astrophysics Data System (ADS)

Mieszczak, M.

2018-03-01

Steel unbonded tendons have been introduced in Europe for construction prestressing many years later than in the USA, Honkong, Singapore or Australia. In Poland, they appeared in the early 1990s. Despite their short application, in the last decade, the Institute of Materials and Building Constructions of the Cracow University of Technology in cooperation with the TCE Structural Design & Consulting company has developed and implemented several interesting and unique designs of building components, using the advantages of this type of prestressing. In the author’s work, apart from the short description of these tendons, several selected (own and foreign) projects of unique character have been presented.

Embedded Control System for Smart Walking Assistance Device.

PubMed

Bosnak, Matevz; Skrjanc, Igor

2017-03-01

This paper presents the design and implementation of a unique control system for a smart hoist, a therapeutic device that is used in rehabilitation of walking. The control system features a unique human-machine interface that allows the human to intuitively control the system just by moving or rotating its body. The paper contains an overview of the complete system, including the design and implementation of custom sensors, dc servo motor controllers, communication interfaces and embedded-system based central control system. The prototype of the complete system was tested by conducting a 6-runs experiment on 11 subjects and results are showing that the proposed control system interface is indeed intuitive and simple to adopt by the user.

Mechanical and Electronic Approaches to Improve the Sensitivity of Microcantilever Sensors

PubMed Central

Mutyala, Madhu Santosh Ku; Bandhanadham, Deepika; Pan, Liu; Pendyala, Vijaya Rohini; Ji, Hai-Feng

2010-01-01

Advances in the field of Micro Electro Mechanical Systems (MEMS) and their uses now offer unique opportunities in the design of ultrasensitive analytical tools. The analytical community continues to search for cost-effective, reliable, and even portable analytical techniques that can give reliable and fast response results for a variety of chemicals and biomolecules. Microcantilevers (MCLs) have emerged as a unique platform for label-free biosensor or bioassay. Several electronic designs, including piezoresistive, piezoelectric, and capacitive approaches, have been applied to measure the bending or frequency change of the MCLs upon exposure to chemicals. This review summarizes mechanical, fabrication, and electronics approaches to increase the sensitivity of microcantilever (MCL) sensors. PMID:20975987

Career Design Education by Cooperation and Collaboration

NASA Astrophysics Data System (ADS)

Takahashi, Takeo; Koma, Tetsuya; Akiyama, Akira; Kihara, Hitoshi; Yamada, Hirofumi

Kanazawa Technical College (KTC) was established to train beginner engineering students in 1962. Since then, KTC offers a unique education/hands on, and has maintained a 100% employment rate upon graduation. In the fourth grade, students participate in a unique industrial internship program for two weeks during summer vacation. As a result, students’ overall satisfaction rate concerning their education is high. Therefore, instead of offering traditional courses that value the experience of the present, it is necessary to offer a new course that lets student discover for themselves what their future will be like. In this paper, an outline of the career design education executed by the students together with their parent (s) /guardian, the school and industry is described.

System Definition of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM)

NASA Technical Reports Server (NTRS)

Lundquist, Ray; Aymergen, Cagatay; VanCampen, Julie; Abell, James; Smith, Miles; Driggers, Phillip

2008-01-01

The Integrated Science Instrument Module (ISIM) for the James Webb Space Telescope (JWST) provides the critical functions and the environment for the four science instruments on JWST. This complex system development across many international organizations presents unique challenges and unique solutions. Here we describe how the requirement flow has been coordinated through the documentation system, how the tools and processes are used to minimize impact to the development of the affected interfaces, how the system design has matured, how the design review process operates, and how the system implementation is managed through reporting to ensure a truly world class scientific instrument compliment is created as the final product.

Multi-Machine Scheduler

DTIC Science & Technology

1981-10-01

unique alphanumeric designation assigned by the performing orga- nization or provided by the sponsoring organization in accordance with American...for cataloging. (b). Identifiers and Open-Ended Terms. Use identifiers for project names, code names, equipment designators , etc. Use open- ended...spool. Note. These components ae designed to function together or with the BASS alone, if internal control of job processing is not a requirement at a

Universal Design and LGBTQ (Lesbian, Gay, Transgender, Bisexual, and Queer) Issues: Creating Equal Access and Opportunities for Success

ERIC Educational Resources Information Center

Daniels, Jennifer R.; Geiger, Tracy J.

2010-01-01

The authors extend the ideals set forth by the universal design (UD) framework seeking to include the unique needs of students in the lesbian, gay, bisexual, transgender, and queer (LGBTQ) community. Universal design is a philosophy that, when applied to higher education, constitutes acceptance of, equal access for, and equal opportunities for…

Assessment of the Use of Nanofluids in Spacecraft Active Thermal Control Systems

NASA Technical Reports Server (NTRS)

Ungar, Eugene K.; Erickson, Lisa R.

2011-01-01

The addition of metallic nanoparticles to a base heat transfer fluid can dramatically increase its thermal conductivity. These nanofluids have been shown to have advantages in some heat transport systems. Their enhanced properties can allow lower system volumetric flow rates and can reduce the required pumping power. Nanofluids have been suggested for use as working fluids for spacecraft Active Thermal Control Systems (ATCSs). However, there are no studies showing the end-to-end effect of nanofluids on the design and performance of spacecraft ATCSs. In the present work, a parametric study is performed to assess the use of nanofluids in a spacecraft ATCSs. The design parameters of the current Orion capsule and the tabulated thermophysical properties of nanofluids are used to assess the possible benefits of nanofluids and how their incorporation affects the overall design of a spacecraft ATCS. The study shows that the unique system and component-level design parameters of spacecraft ATCSs render them best suited for pure working fluids. The addition of nanoparticles to typical spacecraft thermal control working fluids actually results in an increase in the system mass and required pumping power.

Designing Studies to Test Causal Questions About Early Math: The Development of Making Pre-K Count.

PubMed

Mattera, Shira K; Morris, Pamela A; Jacob, Robin; Maier, Michelle; Rojas, Natalia

2017-01-01

A growing literature has demonstrated that early math skills are associated with later outcomes for children. This research has generated interest in improving children's early math competencies as a pathway to improved outcomes for children in elementary school. The Making Pre-K Count study was designed to test the effects of an early math intervention for preschoolers. Its design was unique in that, in addition to causally testing the effects of early math skills, it also allowed for the examination of a number of additional questions about scale-up, the influence of contextual factors and the counterfactual environment, the mechanism of long-term fade-out, and the role of measurement in early childhood intervention findings. This chapter outlines some of the design considerations and decisions put in place to create a rigorous test of the causal effects of early math skills that is also able to answer these questions in early childhood mathematics and intervention. The study serves as a potential model for how to advance science in the fields of preschool intervention and early mathematics. © 2017 Elsevier Inc. All rights reserved.

X-33 Base Region Thermal Protection System Design Study

NASA Technical Reports Server (NTRS)

Lycans, Randal W.

1998-01-01

The X-33 is an advanced technology demonstrator for validating critical technologies and systems required for an operational Single-Stage-to-Orbit (SSTO) Reusuable Launch Vehicle (RLV). Currently under development by a unique contractor/government team led by Lockheed- Martin Skunk Works (LMSW), and managed by Marshall Space Flight Center (MSFC), the X-33 will be the prototype of the first new launch system developed by the United States since the advent of the space shuttle. This paper documents a design trade study of the X-33 base region thermal protection system (TPS). Two candidate designs were evaluated for thermal performance and weight. The first candidate was a fully reusable metallic TPS using Inconel honeycomb panels insulated with high temperature fibrous insulation, while the second was an ablator/insulator sprayed on the metallic skin of the vehicle. The TPS configurations and insulation thickness requirements were determined for the predicted main engine plume heating environments and base region entry aerothermal environments. In addition to thermal analysis of the design concepts, sensitivity studies were performed to investigate the effect of variations in key parameters of the base TPS analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plotkowski, A.; Rios, O.; Sridharan, N.

Our present research in metal additive manufacturing (AM) focuses on designing processing parameters around existing alloys designed for traditional manufacturing. However, to maximize the benefits of AM, alloys should be designed to specifically take advantage of the unique thermal conditions of these processes. Furthermore, our study focuses on the development of a design methodology for alloys in AM, using a newly developed Al-Ce alloy as an initial case study. To evaluate the candidacy of this system for fusion based additive manufacturing, single-line laser melts were made on cast Al-12Ce plates using three different beam velocities (100, 200, and 300 mm/min).more » The microstructure was evaluated in the as-melted and heat treated conditions (24 hrs at 300°C). An extremely fine microstructure was observed within the weld pools, evolving from eutectic at the outer solid-liquid boundaries to a primary Al FCC dendritic/cellular structure nearer the melt-pool centerline. We rationalized the observed microstructures through the construction of a microstructure selection map for the Al-Ce binary system, which will be used to enable future alloy design. Interestingly, the heat treated samples exhibited no microstructural coarsening.« less

Cultural evolution of military camouflage.

PubMed

Talas, Laszlo; Baddeley, Roland J; Cuthill, Innes C

2017-07-05

While one has evolved and the other been consciously created, animal and military camouflage are expected to show many similar design principles. Using a unique database of calibrated photographs of camouflage uniform patterns, processed using texture and colour analysis methods from computer vision, we show that the parallels with biology are deeper than design for effective concealment. Using two case studies we show that, like many animal colour patterns, military camouflage can serve multiple functions. Following the dissolution of the Warsaw Pact, countries that became more Western-facing in political terms converged on NATO patterns in camouflage texture and colour. Following the break-up of the former Yugoslavia, the resulting states diverged in design, becoming more similar to neighbouring countries than the ancestral design. None of these insights would have been obtained using extant military approaches to camouflage design, which focus solely on concealment. Moreover, our computational techniques for quantifying pattern offer new tools for comparative biologists studying animal coloration.This article is part of the themed issue 'Animal coloration: production, perception, function and application'. © 2017 The Author(s).

Unique sodium phosphosilicate glasses designed through extended topological constraint theory.

PubMed

Zeng, Huidan; Jiang, Qi; Liu, Zhao; Li, Xiang; Ren, Jing; Chen, Guorong; Liu, Fude; Peng, Shou

2014-05-15

Sodium phosphosilicate glasses exhibit unique properties with mixed network formers, and have various potential applications. However, proper understanding on the network structures and property-oriented methodology based on compositional changes are lacking. In this study, we have developed an extended topological constraint theory and applied it successfully to analyze the composition dependence of glass transition temperature (Tg) and hardness of sodium phosphosilicate glasses. It was found that the hardness and Tg of glasses do not always increase with the content of SiO2, and there exist maximum hardness and Tg at a certain content of SiO2. In particular, a unique glass (20Na2O-17SiO2-63P2O5) exhibits a low glass transition temperature (589 K) but still has relatively high hardness (4.42 GPa) mainly due to the high fraction of highly coordinated network former Si((6)). Because of its convenient forming and manufacturing, such kind of phosphosilicate glasses has a lot of valuable applications in optical fibers, optical amplifiers, biomaterials, and fuel cells. Also, such methodology can be applied to other types of phosphosilicate glasses with similar structures.

A Model for Designing Library Instruction for Distance Learning

ERIC Educational Resources Information Center

Rand, Angela Doucet

2013-01-01

Providing library instruction in distance learning environments presents a unique set of challenges for instructional librarians. Innovations in computer-mediated communication and advances in cognitive science research provide the opportunity for designing library instruction that meets a variety of student information seeking needs. Using a…

40 CFR 86.1803-01 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... which are designed primarily for emission control, or whose failure may result in a significant increase... waiver of emission data submission requirements under § 86.1829-01. Element of design means any control... a motor vehicle or motor vehicle engine. Emission control system is a unique group of emission...

Criteria for the Evaluation of Microcomputer Courseware.

ERIC Educational Resources Information Center

Cohen, Vicki Blum

1983-01-01

Discusses attributes which are offered as set of standards to judge instructional software--those unique to design of microcomputer courseware and those included in design of all instruction. Curriculum role, modes of interaction, computer managed instruction, graphics, feedback, packaging, and manuals are noted. Fourteen references are included.…

Space-Inspired Trailers Encourage Exploration on Earth

NASA Technical Reports Server (NTRS)

2013-01-01

Architect Garret Finney joined Johnson Space Center's Habitability Design Center to work on creating comfortable, efficiently designed crew quarters for the ISS. Drawing directly on that experience, Finney founded Houston-based Cricket and set about creating unique, versatile recreational trailers that incorporate space habitat principles and features.

The Development of Staging Mechanisms for the Japanese Satellite Launcher Mu-3SII

NASA Technical Reports Server (NTRS)

Onoda, J.

1985-01-01

The staging mechanisms of the Japanese satellite launch vehicle Mu-3SII involving a unique separation and jettison mechanism for the nose fairing are described. The design requirements, the design features and the development problems are presented together with their solutions.

Battery cell feedthrough apparatus

DOEpatents

Kaun, Thomas D.

1995-01-01

A compact, hermetic feedthrough apparatus comprising interfitting sleeve portions constructed of chemically-stable materials to permit unique battery designs and increase battery life and performance.

Considering RNAi experimental design in parasitic helminths.

PubMed

Dalzell, Johnathan J; Warnock, Neil D; McVeigh, Paul; Marks, Nikki J; Mousley, Angela; Atkinson, Louise; Maule, Aaron G

2012-04-01

Almost a decade has passed since the first report of RNA interference (RNAi) in a parasitic helminth. Whilst much progress has been made with RNAi informing gene function studies in disparate nematode and flatworm parasites, substantial and seemingly prohibitive difficulties have been encountered in some species, hindering progress. An appraisal of current practices, trends and ideals of RNAi experimental design in parasitic helminths is both timely and necessary for a number of reasons: firstly, the increasing availability of parasitic helminth genome/transcriptome resources means there is a growing need for gene function tools such as RNAi; secondly, fundamental differences and unique challenges exist for parasite species which do not apply to model organisms; thirdly, the inherent variation in experimental design, and reported difficulties with reproducibility undermine confidence. Ideally, RNAi studies of gene function should adopt standardised experimental design to aid reproducibility, interpretation and comparative analyses. Although the huge variations in parasite biology and experimental endpoints make RNAi experimental design standardization difficult or impractical, we must strive to validate RNAi experimentation in helminth parasites. To aid this process we identify multiple approaches to RNAi experimental validation and highlight those which we deem to be critical for gene function studies in helminth parasites.

Invisibility problem in acoustics, electromagnetism and heat transfer. Inverse design method

NASA Astrophysics Data System (ADS)

Alekseev, G.; Tokhtina, A.; Soboleva, O.

2017-10-01

Two approaches (direct design and inverse design methods) for solving problems of designing devices providing invisibility of material bodies of detection using different physical fields - electromagnetic, acoustic and static are discussed. The second method is applied for solving problems of designing cloaking devices for the 3D stationary thermal scattering model. Based on this method the design problems under study are reduced to respective control problems. The material parameters (radial and tangential heat conductivities) of the inhomogeneous anisotropic medium filling the thermal cloak and the density of auxiliary heat sources play the role of controls. A unique solvability of direct thermal scattering problem in the Sobolev space is proved and the new estimates of solutions are established. Using these results, the solvability of control problem is proved and the optimality system is derived. Based on analysis of optimality system, the stability estimates of optimal solutions are established and numerical algorithms for solving particular thermal cloaking problem are proposed.

TBCC Fan Stage Operability and Performance

NASA Technical Reports Server (NTRS)

Suder, Kenneth L.

2007-01-01

NASA s Fundamental Aeronautics Program is investigating turbine-based propulsion systems for access to space because it provides the potential for aircraft-like, space-launch operations that may significantly reduce launch costs and improve safety. Studies performed under NASA s NGLT and the NASP High Speed Propulsion Assessment (HiSPA) program indicated a variable cycle turbofan/ramjet was the best configuration to satisfy access-to-space mission requirements because this configuration maximizes the engine thrust-to-weight ratio while minimizing frontal area. To this end, NASA and GE teamed to design a Mach 4 variable cycle turbofan/ramjet engine for access to space. To enable the wide operating range of a Mach 4+ variable cycle turbofan ramjet required the development of a unique fan stage design capable of multi-point operation to accommodate variations in bypass ratio (10X), fan speed (7X), inlet mass flow (3.5X), inlet pressure (8X), and inlet temperature (3X). The primary goal of the fan stage was to provide a high pressure ratio level with good efficiency at takeoff through the mid range of engine operation, while avoiding stall and losses at the higher flight Mach numbers, without the use of variable inlet guide vanes. Overall fan performance and operability therefore requires major consideration, as competing goals at different operating points and aeromechanical issues become major drivers in the design. To mitigate risk of meeting the unique design requirements for the fan stage, NASA and GE teamed to design and build a 57% engine scaled fan stage to be tested in NASA s transonic compressor facility. The objectives of this test are to assess the aerodynamic and aero mechanic performance and operability characteristics of the fan stage over the entire range of engine operation including: 1) sea level static take-off, 2) transition over large swings in fan bypass ratio, 3) transition from turbofan to ramjet, and 4) fan windmilling operation at high Mach flight conditions. In addition, the fan stage design was validated by performing pre-test CFD analysis using both GE proprietary and NASA s APNASA codes. Herein we will discuss 1) the fan stage design, 2) the experiment including the unique facility and instrumentation, and 3) the comparison of pre-test CFD analysis to initial aerodynamic test results for the baseline fan stage configuration. Measurements and pre-test analysis will be compared at 37%, 50%, 80%, 90%, and 100% of design speed to assess the ability of state-of-the-art design and analysis tools to meet the fan stage performance and operability requirements for turbine based propulsion for access to space.

The modern era of research on language evolution: Moving forward. Comment on "Towards a computational comparative neuroprimatology: Framing the language-ready brain" by Michael A. Arbib

NASA Astrophysics Data System (ADS)

Stout, Dietrich

2016-03-01

Twenty-five years ago, Pinker and Bloom [1] helped reinvigorate research on language evolution by arguing that language ;shows signs of complex design for the communication of propositional structures, and the only explanation for the origin of organs with complex design is the process of natural selection.; Since then, empirical research has tested the assertions of (cross-cultural) universality, (cross-species) uniqueness, and (cross-domain) specificity underpinning this argument from design. Appearances aside, points of consensus have emerged. The existence of a core computational and neural substrate unique to language and/or humans is still debated, but it is widely agreed that: 1) human language performance overlaps with behaviors in other domains and species, and 2) such general, pre-existing capacities provided the context for language-specific evolution (e.g. [2]).

New design opportunities with OVI

NASA Astrophysics Data System (ADS)

Bleikolm, Anton F.

1998-04-01

Optically Variable Ink (OVITM) chosen for its unique colour shifting properties is applied to the currencies of more than 50 countries. An significant colour difference at viewing angles of 90 degrees and 30 degrees respectively makes colour copying impossible. New manufacturing techniques for the interference pigment (OVP) provide ever better cost/performance ratios. Screen printing presses newly available on the market guarantee production speeds of 8000 sheets/hour or 130 meters/minute in the case of web printing, perfectly in line with the traditional equipment for manufacturing of currency. Specifically developed ink formulations allow UV-curing at high speed or oxidative drying to create highly mechanically and chemically resistant colour shifting prints. The unique colour shifting characteristics together with overprinting in intaglio give design opportunities providing the best protection against colour copying or commercial reprint. Specific designs of OVP together with high security ingredients allow the formulation of machine readable optically variable inks useful for the authentication and sorting of documents.

A Unique Capsule Locus in the Newly Designated Actinobacillus pleuropneumoniae Serovar 16 and Development of a Diagnostic PCR Assay.

PubMed

Bossé, Janine T; Li, Yanwen; Sárközi, Rita; Gottschalk, Marcelo; Angen, Øystein; Nedbalcova, Katerina; Rycroft, Andrew N; Fodor, László; Langford, Paul R

2017-03-01

Actinobacillus pleuropneumoniae causes pleuropneumonia, an economically significant lung disease of pigs. Recently, isolates of A. pleuropneumoniae that were serologically distinct from the previously characterized 15 serovars were described, and a proposal was put forward that they comprised a new serovar, serovar 16. Here we used whole-genome sequencing of the proposed serovar 16 reference strain A-85/14 to confirm the presence of a unique capsular polysaccharide biosynthetic locus. For molecular diagnostics, primers were designed from the capsule locus of strain A-85/14, and a PCR was formulated that differentiated serovar 16 isolates from all 15 known serovars and other common respiratory pathogenic/commensal bacteria of pigs. Analysis of the capsule locus of strain A-85/14 combined with the previous serological data show the existence of a sixteenth serovar-designated serovar 16-of A. pleuropneumoniae . Copyright © 2017 Bossé et al.

Hierarchically structured activated carbon for ultracapacitors

NASA Astrophysics Data System (ADS)

Kim, Mok-Hwa; Kim, Kwang-Bum; Park, Sun-Min; Roh, Kwang Chul

2016-02-01

To resolve the pore-associated bottleneck problem observed in the electrode materials used for ultracapacitors, which inhibits the transport of the electrolyte ions, we designed hierarchically structured activated carbon (HAC) by synthesizing a mesoporous silica template/carbon composite and chemically activating it to simultaneously remove the silica template and increase the pore volume. The resulting HAC had a well-designed, unique porous structure, which allowed for large interfaces for efficient electric double-layer formation. Given the unique characteristics of the HAC, we believe that the developed synthesis strategy provides important insights into the design and fabrication of hierarchical carbon nanostructures. The HAC, which had a specific surface area of 1,957 m2 g-1, exhibited an extremely high specific capacitance of 157 F g-1 (95 F cc-1), as well as a high rate capability. This indicated that it had superior energy storage capability and was thus suitable for use in advanced ultracapacitors.

Design and fabrication of multispectral optics using expanded glass map

NASA Astrophysics Data System (ADS)

Bayya, Shyam; Gibson, Daniel; Nguyen, Vinh; Sanghera, Jasbinder; Kotov, Mikhail; Drake, Gryphon; Deegan, John; Lindberg, George

2015-06-01

As the desire to have compact multispectral imagers in various DoD platforms is growing, the dearth of multispectral optics is widely felt. With the limited number of material choices for optics, these multispectral imagers are often very bulky and impractical on several weight sensitive platforms. To address this issue, NRL has developed a large set of unique infrared glasses that transmit from 0.9 to > 14 μm in wavelength and expand the glass map for multispectral optics with refractive indices from 2.38 to 3.17. They show a large spread in dispersion (Abbe number) and offer some unique solutions for multispectral optics designs. The new NRL glasses can be easily molded and also fused together to make bonded doublets. A Zemax compatible glass file has been created and is available upon request. In this paper we present some designs, optics fabrication and imaging, all using NRL materials.

A quality by design approach to understand formulation and process variability in pharmaceutical melt extrusion processes.

PubMed

Patwardhan, Ketaki; Asgarzadeh, Firouz; Dassinger, Thomas; Albers, Jessica; Repka, Michael A

2015-05-01

In this study, the principles of quality by design (QbD) have been uniquely applied to a pharmaceutical melt extrusion process for an immediate release formulation with a low melting model drug, ibuprofen. Two qualitative risk assessment tools - Fishbone diagram and failure mode effect analysis - were utilized to strategically narrow down the most influential parameters. Selected variables were further assessed using a Plackett-Burman screening study, which was upgraded to a response surface design consisting of the critical factors to study the interactions between the study variables. In process torque, glass transition temperature (Tg ) of the extrudates, assay, dissolution and phase change were measured as responses to evaluate the critical quality attributes (CQAs) of the extrudates. The effect of each study variable on the measured responses was analysed using multiple regression for the screening design and partial least squares for the optimization design. Experimental limits for formulation and process parameters to attain optimum processing have been outlined. A design space plot describing the domain of experimental variables within which the CQAs remained unchanged was developed. A comprehensive approach for melt extrusion product development based on the QbD methodology has been demonstrated. Drug loading concentrations between 40- 48%w/w and extrusion temperature in the range of 90-130°C were found to be the most optimum. © 2015 Royal Pharmaceutical Society.

Space Station Freedom pressurized element interior design process

NASA Technical Reports Server (NTRS)

Hopson, George D.; Aaron, John; Grant, Richard L.

1990-01-01

The process used to develop the on-orbit working and living environment of the Space Station Freedom has some very unique constraints and conditions to satisfy. The goal is to provide maximum efficiency and utilization of the available space, in on-orbit, zero G conditions that establishes a comfortable, productive, and safe working environment for the crew. The Space Station Freedom on-orbit living and working space can be divided into support for three major functions: (1) operations, maintenance, and management of the station; (2) conduct of experiments, both directly in the laboratories and remotely for experiments outside the pressurized environment; and (3) crew related functions for food preparation, housekeeping, storage, personal hygiene, health maintenance, zero G environment conditioning, and individual privacy, and rest. The process used to implement these functions, the major requirements driving the design, unique considerations and constraints that influence the design, and summaries of the analysis performed to establish the current configurations are described. Sketches and pictures showing the layout and internal arrangement of the Nodes, U.S. Laboratory and Habitation modules identify the current design relationships of the common and unique station housekeeping subsystems. The crew facilities, work stations, food preparation and eating areas (galley and wardroom), and exercise/health maintenance configurations, waste management and personal hygiene area configuration are shown. U.S. Laboratory experiment facilities and maintenance work areas planned to support the wide variety and mixtures of life science and materials processing payloads are described.

Methodological issues in the design and analyses of neonatal research studies: Experience of the NICHD Neonatal Research Network.

PubMed

Das, Abhik; Tyson, Jon; Pedroza, Claudia; Schmidt, Barbara; Gantz, Marie; Wallace, Dennis; Truog, William E; Higgins, Rosemary D

2016-10-01

Impressive advances in neonatology have occurred over the 30 years of life of The Eunice Kennedy Shriver National Institute of Child Health and Human Development Neonatal Research Network (NRN). However, substantial room for improvement remains in investigating and further developing the evidence base for improving outcomes among the extremely premature. We discuss some of the specific methodological challenges in the statistical design and analysis of randomized trials and observational studies in this population. Challenges faced by the NRN include designing trials for unusual or rare outcomes, accounting for and explaining center variations, identifying other subgroup differences, and balancing safety and efficacy concerns between short-term hospital outcomes and longer-term neurodevelopmental outcomes. In conclusion, the constellation of unique patient characteristics in neonates calls for broad understanding and careful consideration of the issues identified in this article for conducting rigorous studies in this population. Copyright © 2016 Elsevier Inc. All rights reserved.

The Lifeways Cross-Generation Study: design, recruitment and data management considerations.

PubMed

O'Mahony, D; Fallon, U B; Hannon, F; Kloeckner, K; Avalos, G; Murphy, A W; Kelleher, C C

2007-09-01

The Lifeways Cross-Generation Cohort Study was first established in 2001 and is a unique longitudinal database in Ireland, with currently over three and a half thousand family participants derived from 1124 mothers recruited initially during pregnancy, mainly during 2002. The database comprises a) baseline self-reported health data for all mothers, a third of fathers and at least one grandparent b) clinical hospital data at recruitment, c) three year follow-up data from the families' General Practitioners, and d) linkage to hospital and vaccination databases. Data collection for the five-year follow-up with parents is underway, continuing through 2007. Because there is at present no single national/regional health information system in Ireland, original data instruments were designed to capture data directly from family members and through their hospitals and healthcare providers. A system of relational databases was designed to coordinate data capture for a complex array of study instruments and to facilitate tracking of family members at different time points.

RNA design rules from a massive open laboratory

PubMed Central

Lee, Jeehyung; Kladwang, Wipapat; Lee, Minjae; Cantu, Daniel; Azizyan, Martin; Kim, Hanjoo; Limpaecher, Alex; Gaikwad, Snehal; Yoon, Sungroh; Treuille, Adrien; Das, Rhiju

2014-01-01

Self-assembling RNA molecules present compelling substrates for the rational interrogation and control of living systems. However, imperfect in silico models—even at the secondary structure level—hinder the design of new RNAs that function properly when synthesized. Here, we present a unique and potentially general approach to such empirical problems: the Massive Open Laboratory. The EteRNA project connects 37,000 enthusiasts to RNA design puzzles through an online interface. Uniquely, EteRNA participants not only manipulate simulated molecules but also control a remote experimental pipeline for high-throughput RNA synthesis and structure mapping. We show herein that the EteRNA community leveraged dozens of cycles of continuous wet laboratory feedback to learn strategies for solving in vitro RNA design problems on which automated methods fail. The top strategies—including several previously unrecognized negative design rules—were distilled by machine learning into an algorithm, EteRNABot. Over a rigorous 1-y testing phase, both the EteRNA community and EteRNABot significantly outperformed prior algorithms in a dozen RNA secondary structure design tests, including the creation of dendrimer-like structures and scaffolds for small molecule sensors. These results show that an online community can carry out large-scale experiments, hypothesis generation, and algorithm design to create practical advances in empirical science. PMID:24469816

The Glory Program: Global Science from a Unique Spacecraft Integration

NASA Technical Reports Server (NTRS)

Bajpayee Jaya; Durham, Darcie; Ichkawich, Thomas

2006-01-01

The Glory program is an Earth and Solar science mission designed to broaden science community knowledge of the environment. The causes and effects of global warming have become a concern in recent years and Glory aims to contribute to the knowledge base of the science community. Glory is designed for two functions: one is solar viewing to monitor the total solar irradiance and the other is observing the Earth s atmosphere for aerosol composition. The former is done with an active cavity radiometer, while the latter is accomplished with an aerosol polarimeter sensor to discern atmospheric particles. The Glory program is managed by NASA Goddard Space Flight Center (GSFC) with Orbital Sciences in Dulles, VA as the prime contractor for the spacecraft bus, mission operations, and ground system. This paper will describe some of the more unique features of the Glory program including the integration and testing of the satellite and instruments as well as the science data processing. The spacecraft integration and test approach requires extensive analysis and additional planning to ensure existing components are successfully functioning with the new Glory components. The science mission data analysis requires development of mission unique processing systems and algorithms. Science data analysis and distribution will utilize our national assets at the Goddard Institute for Space Studies (GISS) and the University of Colorado's Laboratory for Atmospheric and Space Physics (LASP). The Satellite was originally designed and built for the Vegetation Canopy Lidar (VCL) mission, which was terminated in the middle of integration and testing due to payload development issues. The bus was then placed in secure storage in 2001 and removed from an environmentally controlled container in late 2003 to be refurbished to meet the Glory program requirements. Functional testing of all the components was done as a system at the start of the program, very different from a traditional program. The plan for Glory is to minimize any changes to the spacecraft in order to meet the Glory requirements. This means that the instrument designs must adhere to the existing interfaces and capabilities as much as possible. Given Glory's unique history and the potential science return, the program is one of significant value to both the science community and the world. The findings Glory promises will improve our understanding of the drivers for global climate change for a minimal investment. The program hopes to show that reuse of existing government assets can result in a lower cost, and fully successful mission.

A multichannel scala tympani electrode array incorporating a drug delivery system for chronic intracochlear infusion.

PubMed

Shepherd, Robert K; Xu, Jin

2002-10-01

We have developed a novel scala tympani electrode array suitable for use in experimental animals. A unique feature of this array is its ability to chronically deliver pharmacological agents to the scala tympani. The design of the electrode array is described in detail. Experimental studies performed in guinea pigs confirm that this array can successfully deliver various drugs to the cochlea while chronically stimulating the auditory nerve.