Teaching for Conceptual Change in a Density Unit Taught to 7th Graders: Comparing Two Teaching Methodologies--Scientific Inquiry and a Traditional Approach

ERIC Educational Resources Information Center

Holveck, Susan E.

2012-01-01

This mixed methods study was designed to compare the effect of using an inquiry teaching methodology and a more traditional teaching methodology on the learning gains of students who were taught a five-week conceptual change unit on density. Seventh graders (N = 479) were assigned to five teachers who taught the same unit on density using either a…

The Continued Salience of Methodological Issues for Measuring Psychiatric Disorders in International Surveys

ERIC Educational Resources Information Center

Tausig, Mark; Subedi, Janardan; Broughton, Christopher; Pokimica, Jelena; Huang, Yinmei; Santangelo, Susan L.

2011-01-01

We investigated the extent to which methodological concerns explicitly addressed by the designers of the World Mental Health Surveys persist in the results that were obtained using the WMH-CIDI instrument. We compared rates of endorsement of mental illness symptoms in the United States (very high) and Nepal (very low) as they were affected by…

Direct cost analysis of intensive care unit stay in four European countries: applying a standardized costing methodology.

PubMed

Tan, Siok Swan; Bakker, Jan; Hoogendoorn, Marga E; Kapila, Atul; Martin, Joerg; Pezzi, Angelo; Pittoni, Giovanni; Spronk, Peter E; Welte, Robert; Hakkaart-van Roijen, Leona

2012-01-01

The objective of the present study was to measure and compare the direct costs of intensive care unit (ICU) days at seven ICU departments in Germany, Italy, the Netherlands, and the United Kingdom by means of a standardized costing methodology. A retrospective cost analysis of ICU patients was performed from the hospital's perspective. The standardized costing methodology was developed on the basis of the availability of data at the seven ICU departments. It entailed the application of the bottom-up approach for "hotel and nutrition" and the top-down approach for "diagnostics," "consumables," and "labor." Direct costs per ICU day ranged from €1168 to €2025. Even though the distribution of costs varied by cost component, labor was the most important cost driver at all departments. The costs for "labor" amounted to €1629 at department G but were fairly similar at the other departments (€711 ± 115). Direct costs of ICU days vary widely between the seven departments. Our standardized costing methodology could serve as a valuable instrument to compare actual cost differences, such as those resulting from differences in patient case-mix. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Direct potable reuse microbial risk assessment methodology: Sensitivity analysis and application to State log credit allocations.

PubMed

Soller, Jeffrey A; Eftim, Sorina E; Nappier, Sharon P

2018-01-01

Understanding pathogen risks is a critically important consideration in the design of water treatment, particularly for potable reuse projects. As an extension to our published microbial risk assessment methodology to estimate infection risks associated with Direct Potable Reuse (DPR) treatment train unit process combinations, herein, we (1) provide an updated compilation of pathogen density data in raw wastewater and dose-response models; (2) conduct a series of sensitivity analyses to consider potential risk implications using updated data; (3) evaluate the risks associated with log credit allocations in the United States; and (4) identify reference pathogen reductions needed to consistently meet currently applied benchmark risk levels. Sensitivity analyses illustrated changes in cumulative annual risks estimates, the significance of which depends on the pathogen group driving the risk for a given treatment train. For example, updates to norovirus (NoV) raw wastewater values and use of a NoV dose-response approach, capturing the full range of uncertainty, increased risks associated with one of the treatment trains evaluated, but not the other. Additionally, compared to traditional log-credit allocation approaches, our results indicate that the risk methodology provides more nuanced information about how consistently public health benchmarks are achieved. Our results indicate that viruses need to be reduced by 14 logs or more to consistently achieve currently applied benchmark levels of protection associated with DPR. The refined methodology, updated model inputs, and log credit allocation comparisons will be useful to regulators considering DPR projects and design engineers as they consider which unit treatment processes should be employed for particular projects. Published by Elsevier Ltd.

Geologic framework for the national assessment of carbon dioxide storage resources

USGS Publications Warehouse

Warwick, Peter D.; Corum, Margo D.

2012-01-01

The 2007 Energy Independence and Security Act (Public Law 110–140) directs the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO2) and to consult with other Federal and State agencies to locate the pertinent geological data needed for the assessment. The geologic sequestration of CO2 is one possible way to mitigate its effects on climate change. The methodology used for the national CO2 assessment (Open-File Report 2010-1127; http://pubs.usgs.gov/of/2010/1127/) is based on previous USGS probabilistic oil and gas assessment methodologies. The methodology is non-economic and intended to be used at regional to subbasinal scales. The operational unit of the assessment is a storage assessment unit (SAU), composed of a porous storage formation with fluid flow and an overlying sealing unit with low permeability. Assessments are conducted at the SAU level and are aggregated to basinal and regional results. This report identifies and contains geologic descriptions of SAUs in separate packages of sedimentary rocks within the assessed basin and focuses on the particular characteristics, specified in the methodology, that influence the potential CO2 storage resource in those SAUs. Specific descriptions of the SAU boundaries as well as their sealing and reservoir units are included. Properties for each SAU such as depth to top, gross thickness, net porous thickness, porosity, permeability, groundwater quality, and structural reservoir traps are provided to illustrate geologic factors critical to the assessment. Although assessment results are not contained in this report, the geologic information included here will be employed, as specified in the methodology, to calculate a statistical Monte Carlo-based distribution of potential storage space in the various SAUs. Figures in this report show SAU boundaries and cell maps of well penetrations through the sealing unit into the top of the storage formation. Wells sharing the same well borehole are treated as a single penetration. Cell maps show the number of penetrating wells within one square mile and are derived from interpretations of incompletely attributed well data, a digital compilation that is known not to include all drilling. The USGS does not expect to know the location of all wells and cannot guarantee the amount of drilling through specific formations in any given cell shown on cell maps.

Methodological advances in unit cost calculation of psychiatric residential care in Spain.

PubMed

Moreno, Karen; Sanchez, Eduardo; Salvador-Carulla, Luis

2008-06-01

The care of the severe mentally ill who need intensive support for their daily living (dependent persons), accounts for an increasingly large proportion of public expenditure in many European countries. The main aim of this study was the design and implementation of solid methodology to calculate unit costs of different types of care. To date, methodologies used in Spain have produced inaccurate figures, suggesting few variations in patient consumption of the same service. An adaptation of the Activity-Based-Costing methodology was applied in Navarre, a region in the North of Spain, as a pilot project for the public mental health services. A unit cost per care process was obtained for all levels of care considered in each service during 2005. The European Service Mapping Schedule (ESMS) codes were used to classify the services for later comparisons. Finally, in order to avoid problems of asymmetric cost distribution, a simple Bayesian model was used. As an illustration, we report the results obtained for long-term residential care and note that there are important variations between unit costs when considering different levels of care. Considering three levels of care (Level 1-low, Level 2-medium and Level 3-intensive), the cost per bed in Level 3 was 10% higher than that of Level 2. The results obtained using the cost methodology described provide more useful information than those using conventional methods, although its implementation requires much time to compile the necessary information during the initial stages and the collaboration of staff and managers working in the services. However, in some services, if no important variations exist in patient care, another method would be advisable, although our system provides very useful information about patterns of care from a clinical point of view. Detailed work is required at the beginning of the implementation in order to avoid the calculation of distorted figures and to improve the levels of decision making within the Health Care Service. IMPLICATIONS FOR HEALTH CARE POLICY AND FORMULATIONS: As other European countries, Spain has adopted a new care system for the dependent population. To finance this new system, reliable figures must be calculated for each type of user in order to establish tariffs or public prices. This study provides a useful management tool to assist in decision making. The methodology should be implemented in other regions of Spain and even in other countries in order to compare our results and validate the cost system designed.

The Past, Present and Future of Geodemographic Research in the United States and United Kingdom

PubMed Central

Singleton, Alexander D.; Spielman, Seth E.

2014-01-01

This article presents an extensive comparative review of the emergence and application of geodemographics in both the United States and United Kingdom, situating them as an extension of earlier empirically driven models of urban socio-spatial structure. The empirical and theoretical basis for this generalization technique is also considered. Findings demonstrate critical differences in both the application and development of geodemographics between the United States and United Kingdom resulting from their diverging histories, variable data economies, and availability of academic or free classifications. Finally, current methodological research is reviewed, linking this discussion prospectively to the changing spatial data economy in both the United States and United Kingdom. PMID:25484455

24 CFR Appendix to Part 972 - Methodology of Comparing Cost of Public Housing With the Cost of Tenant-Based Assistance

Code of Federal Regulations, 2010 CFR

2010-04-01

..., supportive services, maintenance, tenant, and PHA-paid utilities) will be reduced as a result of post... and utility allowances) shall be expressed as total operating costs per year. For example, if a... $504 per unit month. By this example, the current costs per occupied unit are at least 10 percent...

24 CFR Appendix to Part 972 - Methodology of Comparing Cost of Public Housing With the Cost of Tenant-Based Assistance

Code of Federal Regulations, 2012 CFR

2012-04-01

..., supportive services, maintenance, tenant, and PHA-paid utilities) will be reduced as a result of post... and utility allowances) shall be expressed as total operating costs per year. For example, if a... $504 per unit month. By this example, the current costs per occupied unit are at least 10 percent...

24 CFR Appendix to Part 972 - Methodology of Comparing Cost of Public Housing With the Cost of Tenant-Based Assistance

Code of Federal Regulations, 2011 CFR

2011-04-01

..., supportive services, maintenance, tenant, and PHA-paid utilities) will be reduced as a result of post... and utility allowances) shall be expressed as total operating costs per year. For example, if a... $504 per unit month. By this example, the current costs per occupied unit are at least 10 percent...

Decreasing Postanesthesia Care Unit to Floor Transfer Times to Facilitate Short Stay Total Joint Replacements.

PubMed

Sibia, Udai S; Grover, Jennifer; Turcotte, Justin J; Seanger, Michelle L; England, Kimberly A; King, Jennifer L; King, Paul J

2018-04-01

We describe a process for studying and improving baseline postanesthesia care unit (PACU)-to-floor transfer times after total joint replacements. Quality improvement project using lean methodology. Phase I of the investigational process involved collection of baseline data. Phase II involved developing targeted solutions to improve throughput. Phase III involved measured project sustainability. Phase I investigations revealed that patients spent an additional 62 minutes waiting in the PACU after being designated ready for transfer. Five to 16 telephone calls were needed between the PACU and the unit to facilitate each patient transfer. The most common reason for delay was unavailability of the unit nurse who was attending to another patient (58%). Phase II interventions resulted in transfer times decreasing to 13 minutes (79% reduction, P < .001). Phase III recorded sustained transfer times at 30 minutes, a net 52% reduction (P < .001) from baseline. Lean methodology resulted in the immediate decrease of PACU-to-floor transfer times by 79%, with a 52% sustained improvement. Our methods can also be used to improve efficiencies of care at other institutions. Copyright © 2016 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

[In-depth interviews and the Kano model to determine user requirements in a burns unit].

PubMed

González-Revaldería, J; Holguín-Holgado, P; Lumbreras-Marín, E; Núñez-López, G

To determine the healthcare requirements of patients in a Burns Unit, using qualitative techniques, such us in-depth personal interviews and Kano's methodology. Qualitative methodology using in-depth personal interviews (12 patients), Kano's conceptual model, and the SERVQHOS questionnaire (24 patients). All patients had been hospitalised in the last 12 months in the Burns Unit. Using Kano's methodology, service attributes were grouped by affinity diagrams, and classified as follows: must-be, attractive (unexpected, great satisfaction), and one-dimensional (linked to the degree of functionality of the service). The outcomes were compared with those obtained with SERVQHOS questionnaire. From the analysis of in-depth interviews, 11 requirements were obtained, referring to hotel aspects, information, need for closer staff relationship, and organisational aspects. The attributes classified as must-be were free television and automatic TV disconnection at midnight. Those classified as attractive were: individual room for more privacy, information about dressing change times in order to avoid anxiety, and additional staff for in-patients. The results were complementary to those obtained with the SERVQHOS questionnaire. In-depth personal interviews provide extra knowledge about patient requirements, complementing the information obtained with questionnaires. With this methodology, a more active patient participation is achieved and the companion's opinion is also taken into account. Copyright © 2016 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Flow units classification for geostatisitical three-dimensional modeling of a non-marine sandstone reservoir: A case study from the Paleocene Funing Formation of the Gaoji Oilfield, east China

NASA Astrophysics Data System (ADS)

Zhang, Penghui; Zhang, Jinliang; Wang, Jinkai; Li, Ming; Liang, Jie; Wu, Yingli

2018-05-01

Flow units classification can be used in reservoir characterization. In addition, characterizing the reservoir interval into flow units is an effective way to simulate the reservoir. Paraflow units (PFUs), the second level of flow units, are used to estimate the spatial distribution of continental clastic reservoirs at the detailed reservoir description stage. In this study, we investigate a nonroutine methodology to predict the external and internal distribution of PFUs. The methodology outlined enables the classification of PFUs using sandstone core samples and log data. The relationships obtained between porosity, permeability and pore throat aperture radii (r35) values were established for core and log data obtained from 26 wells from the Funing Formation, Gaoji Oilfield, Subei Basin, China. The present study refines predicted PFUs at logged (0.125-m) intervals, whose scale is much smaller than routine methods. Meanwhile, three-dimensional models are built using sequential indicator simulation to characterize PFUs in wells. Four distinct PFUs are classified and located based on the statistical methodology of cluster analysis, and each PFU has different seepage ability. The results of this study demonstrate the obtained models are able to quantify reservoir heterogeneity. Due to different petrophysical characteristics and seepage ability, PFUs have a significant impact on the distribution of the remaining oil. Considering these allows a more accurate understanding of reservoir quality, especially within non-marine sandstone reservoirs.

Identifying additional studies for a systematic review of retention strategies in randomised controlled trials: making contact with trials units and trial methodologists.

PubMed

Brueton, Valerie; Tierney, Jayne F; Stenning, Sally; Rait, Greta

2017-08-22

Search strategies for systematic reviews aim to identify all evidence relevant to the research question posed. Reports of methodological research can be difficult to find leading to biased results in systematic reviews of research methodology. Evidence suggests that contact with investigators can help to identify unpublished research. To identify additional eligible randomised controlled trials (RCTs) for a Cochrane systematic review of strategies to improve retention in RCTs, we conducted a survey of UK clinical trials units (CTUs) and made contact with RCT methodologists. Key contacts for all UK CTUs were sent a personalised email with a short questionnaire and summary protocol of the Cochrane methodology review. The questionnaire asked whether a RCT evaluating strategies to improve retention embedded in a RCT had ever been conducted by the CTU. Questions about the stage of completion and publication of such RCTs were included. The summary protocol outlined the aims, eligibility criteria, examples of types of retention strategies, and the primary outcome for the systematic review. Personal communication with RCT methodologists and presentations of preliminary results of the review at conferences were also used to identify additional eligible RCTs. We checked the results of our standard searches to see if eligible studies identified through these additional methods were also found using our standard searches. We identified 14 of the 38 RCTs included in the Cochrane methodology review by contacting trials units and methodologists. Eleven of the 14 RCTs identified by these methods were either published in grey literature, in press or unpublished. Three remaining RCTs were fully published at the time. Six of the RCTs identified were not found through any other searches. The RCTs identified represented data for 6 of 14 RCTs of incentive strategies (52% of randomised participants included in the review), and 6 of 14 RCTs of communication strategies (52% of randomised participants included in the Cochrane review). Data were unavailable for two of the RCTs identified. Methodological evaluations embedded in RCTs may be unpublished, published in the grey literature or where published, poorly indexed in bibliographic databases. To identify such studies and minimise selection bias in systematic reviews of methodological evaluations, reviewers should consider contacting CTUs and trial methodologists.

Combining living anionic polymerization with branching reactions in an iterative fashion to design branched polymers.

PubMed

Higashihara, Tomoya; Sugiyama, Kenji; Yoo, Hee-Soo; Hayashi, Mayumi; Hirao, Akira

2010-06-16

This paper reviews the precise synthesis of many-armed and multi-compositional star-branched polymers, exact graft (co)polymers, and structurally well-defined dendrimer-like star-branched polymers, which are synthetically difficult, by a commonly-featured iterative methodology combining living anionic polymerization with branched reactions to design branched polymers. The methodology basically involves only two synthetic steps; (a) preparation of a polymeric building block corresponding to each branched polymer and (b) connection of the resulting building unit to another unit. The synthetic steps were repeated in a stepwise fashion several times to successively synthesize a series of well-defined target branched polymers. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

New Method for Updating Mean Time Between Failure for ISS Orbital Replaceable Units Consultation Report

NASA Technical Reports Server (NTRS)

Parsons, Vickie S.

2009-01-01

A request to conduct a peer review of the International Space Station (ISS) proposal to use Bayesian methodology for updating Mean Time Between Failure (MTBF) for ISS Orbital Replaceable Units (ORU) was submitted to the NASA Engineering and Safety Center (NESC) on September 20, 2005. The results were requested by October 20, 2005 in order to be available during the process of reworking the current ISS flight manifest. The results are included in this report.

Independent evaluation of the transit retrofit package safety applications : final report.

DOT National Transportation Integrated Search

2015-02-01

This report presents the methodology and results of the independent evaluation of retrofit safety packages installed on transit vehicles in the : Safety Pilot Model Deploymentpart of the United States Department of Transportations Intelligent T...

Multiobjective assessment of distributed energy storage location in electricity networks

NASA Astrophysics Data System (ADS)

Ribeiro Gonçalves, José António; Neves, Luís Pires; Martins, António Gomes

2017-07-01

This paper presents a methodology to provide information to a decision maker on the associated impacts, both of economic and technical nature, of possible management schemes of storage units for choosing the best location of distributed storage devices, with a multiobjective optimisation approach based on genetic algorithms. The methodology was applied to a case study, a known distribution network model in which the installation of distributed storage units was tested, using lithium-ion batteries. The obtained results show a significant influence of the charging/discharging profile of batteries on the choice of their best location, as well as the relevance that these choices may have for the different network management objectives, for example, for reducing network energy losses or minimising voltage deviations. Results also show a difficult cost-effectiveness of an energy-only service, with the tested systems, both due to capital cost and due to the efficiency of conversion.

A Comprehensive Reliability Methodology for Assessing Risk of Reusing Failed Hardware Without Corrective Actions with and Without Redundancy

NASA Technical Reports Server (NTRS)

Putcha, Chandra S.; Mikula, D. F. Kip; Dueease, Robert A.; Dang, Lan; Peercy, Robert L.

1997-01-01

This paper deals with the development of a reliability methodology to assess the consequences of using hardware, without failure analysis or corrective action, that has previously demonstrated that it did not perform per specification. The subject of this paper arose from the need to provide a detailed probabilistic analysis to calculate the change in probability of failures with respect to the base or non-failed hardware. The methodology used for the analysis is primarily based on principles of Monte Carlo simulation. The random variables in the analysis are: Maximum Time of Operation (MTO) and operation Time of each Unit (OTU) The failure of a unit is considered to happen if (OTU) is less than MTO for the Normal Operational Period (NOP) in which this unit is used. NOP as a whole uses a total of 4 units. Two cases are considered. in the first specialized scenario, the failure of any operation or system failure is considered to happen if any of the units used during the NOP fail. in the second specialized scenario, the failure of any operation or system failure is considered to happen only if any two of the units used during the MOP fail together. The probability of failure of the units and the system as a whole is determined for 3 kinds of systems - Perfect System, Imperfect System 1 and Imperfect System 2. in a Perfect System, the operation time of the failed unit is the same as that of the MTO. In an Imperfect System 1, the operation time of the failed unit is assumed as 1 percent of the MTO. In an Imperfect System 2, the operation time of the failed unit is assumed as zero. in addition, simulated operation time of failed units is assumed as 10 percent of the corresponding units before zero value. Monte Carlo simulation analysis is used for this study. Necessary software has been developed as part of this study to perform the reliability calculations. The results of the analysis showed that the predicted change in failure probability (P(sub F)) for the previously failed units is as high as 49 percent above the baseline (perfect system) for the worst case. The predicted change in system P(sub F) for the previously failed units is as high as 36% for single unit failure without any redundancy. For redundant systems, with dual unit failure, the predicted change in P(sub F) for the previously failed units is as high as 16%. These results will help management to make decisions regarding the consequences of using previously failed units without adequate failure analysis or corrective action.

An Interoperability Framework and Capability Profiling for Manufacturing Software

NASA Astrophysics Data System (ADS)

Matsuda, M.; Arai, E.; Nakano, N.; Wakai, H.; Takeda, H.; Takata, M.; Sasaki, H.

ISO/TC184/SC5/WG4 is working on ISO16100: Manufacturing software capability profiling for interoperability. This paper reports on a manufacturing software interoperability framework and a capability profiling methodology which were proposed and developed through this international standardization activity. Within the context of manufacturing application, a manufacturing software unit is considered to be capable of performing a specific set of function defined by a manufacturing software system architecture. A manufacturing software interoperability framework consists of a set of elements and rules for describing the capability of software units to support the requirements of a manufacturing application. The capability profiling methodology makes use of the domain-specific attributes and methods associated with each specific software unit to describe capability profiles in terms of unit name, manufacturing functions, and other needed class properties. In this methodology, manufacturing software requirements are expressed in terns of software unit capability profiles.

Development and application of a methodology for a clean development mechanism to avoid methane emissions in closed landfills.

PubMed

Janke, Leandro; Lima, André O S; Millet, Maurice; Radetski, Claudemir M

2013-01-01

In Brazil, Solid Waste Disposal Sites have operated without consideration of environmental criteria, these areas being characterized by methane (CH4) emissions during the anaerobic degradation of organic matter. The United Nations organization has made efforts to control this situation, through the United Nations Framework Convention on Climate Change (UNFCCC) and the Kyoto Protocol, where projects that seek to reduce the emissions of greenhouse gases (GHG) can be financially rewarded through Certified Emission Reductions (CERs) if they respect the requirements established by the Clean Development Mechanism (CDM), such as the use of methodologies approved by the CDM Executive Board (CDM-EB). Thus, a methodology was developed according to the CDM standards related to the aeration, excavation and composting of closed Municipal Solid Waste (MSW) landfills, which was submitted to CDM-EB for assessment and, after its approval, applied to a real case study in Maringá City (Brazil) with a view to avoiding negative environmental impacts due the production of methane and leachates even after its closure. This paper describes the establishment of this CDM-EB-approved methodology to determine baseline emissions, project emissions and the resultant emission reductions with the application of appropriate aeration, excavation and composting practices at closed MSW landfills. A further result obtained through the application of the methodology in the landfill case study was that it would be possible to achieve an ex-ante emission reduction of 74,013 tCO2 equivalent if the proposed CDM project activity were implemented.

[Statistical (Poisson) motor unit number estimation. Methodological aspects and normal results in the extensor digitorum brevis muscle of healthy subjects].

PubMed

Murga Oporto, L; Menéndez-de León, C; Bauzano Poley, E; Núñez-Castaín, M J

Among the differents techniques for motor unit number estimation (MUNE) there is the statistical one (Poisson), in which the activation of motor units is carried out by electrical stimulation and the estimation performed by means of a statistical analysis based on the Poisson s distribution. The study was undertaken in order to realize an approximation to the MUNE Poisson technique showing a coprehensible view of its methodology and also to obtain normal results in the extensor digitorum brevis muscle (EDB) from a healthy population. One hundred fourteen normal volunteers with age ranging from 10 to 88 years were studied using the MUNE software contained in a Viking IV system. The normal subjects were divided into two age groups (10 59 and 60 88 years). The EDB MUNE from all them was 184 49. Both, the MUNE and the amplitude of the compound muscle action potential (CMAP) were significantly lower in the older age group (p< 0.0001), showing the MUNE a better correlation with age than CMAP amplitude ( 0.5002 and 0.4142, respectively p< 0.0001). Statistical MUNE method is an important way for the assessment to the phisiology of the motor unit. The value of MUNE correlates better with the neuromuscular aging process than CMAP amplitude does.

A Methodology for Assessing the Impact of Sea Level Rise on Representative Military Installations in the Southwestern United States (RC-1703)

DTIC Science & Technology

2014-03-03

results. As part of this research and development effort, a number of products were developed that served to advance the research and provided a testing ...Teams, U.S. Navy SEALs, brown‐water Navy personnel, and Naval Reserve Officer Training Corps midshipmen. The base conducts research and tests of newly...effort, a number of products were developed that served to advance the research , and provided a testing ground for our methodologies. In addition

Assessment of the effectiveness of wrong way driving countermeasures and mitigation methods.

DOT National Transportation Integrated Search

2014-12-01

This report describes the methodology and results of tasks performed to evaluate the effectiveness of : wrong way driving countermeasures and mitigation methods. Researchers reviewed the state of the practice : regarding wrong way driving in the Unit...

Allocation of nursing care hours in a combined ophthalmic nursing unit.

PubMed

Navarro, V B; Stout, W A; Tolley, F M

1995-04-01

Traditional service configuration with separate nursing units for outpatient and inpatient care is becoming ineffective for new patient care delivery models. With the new configuration of a combined nursing unit, it was necessary to rethink traditional reporting methodologies and calculation of hours of care. This project management plan is an initial attempt to develop a standard costing/productivity model for a combined unit. The methodology developed from this plan measures nursing care hours for each patient population to determine the number of full time equivalents (FTEs) for a combined unit and allocates FTEs based on inpatient (IP), outpatient (OP), and emergency room (ER) volumes.

Integrated Vehicle-Based Safety Systems (IVBSS) Light Vehicle Field Operational Test Independent Evaluation

DOT National Transportation Integrated Search

2011-10-01

This report presents the methodology and results of the independent evaluation of a prototype integrated crash warning system for : light vehicles as part of the Integrated Vehicle-Based Safety Systems initiative of the United States Department of : ...

Evaluation of Adult Literacy Education in the United States: A Review of Methodological Issues

ERIC Educational Resources Information Center

Shi, Yan; Tsang, Mun C.

2008-01-01

This is a critical review of methodological issues in the evaluation of adult literacy education programs in the United States. It addresses the key research questions: What are the appropriate methods for evaluating these programs under given circumstances. It identifies 15 evaluation studies that are representative of a range of adult literacy…

Introduction to the 2002 geologic assessment of undiscovered oil and gas resources in the San Juan Basin Province, exclusive of Paleozoic rocks: Chapter 2 in Total petroleum systems and geologic assessment of undiscovered oil and gas resources in the San Juan Basin Province, exclusive of Paleozoic rocks, New Mexico and Colorado

USGS Publications Warehouse

,

2013-01-01

The U.S Geological Survey (USGS) periodically conducts assessments of undiscovered oil and gas resources in the United States. The purpose of the U.S. Geological Survey National Oil and Gas Assessment is to develop geologically based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States. The last major USGS assessment of oil and gas of the most important oil and gas provinces in the United States was in 1995 (Gautier and others, 1996). Since then a number of individual assessment provinces have been reappraised using new methodology. This was done particularly for those provinces where new information has become available, where new methodology was expected to reveal more insight to provide a better estimate, where additional geologic investigation was needed, or where continuous accumulations were deemed important. The San Juan Basin was reevaluated because of industry exploitation of new hydrocarbon accumulations that were not previously assessed and because of a change in application of assessment methodology to potential undiscovered hydrocarbon accumulations. Several changes have been made in this study. The methodology is different from that used in 1995 (Schmoker, 2003; Schmoker and Klett, 2003). In this study the total petroleum system (TPS) approach (Magoon and Dow, 1994) is used rather than the play approach. The Chama Basin is not included. The team of scientists studying the basin is different. The 1995 study focused on conventional accumulations, whereas in this 2002 assessment, it was a priority to assess continuous-type accumulations, including coal-bed gas. Consequently we are presenting here an entirely new study and results for the San Juan Basin Province. The results of this 2002 assessment of undiscovered oil and gas resources in the San Juan Basin Province (5022) are presented in this report within the geologic context of individual TPSs and their assessment units (AU) (table 1). Results are reported as the estimated mean of potential additions to reserves as well as for the 95, 50, and 5 percent fractiles.

Comparing Methods for Estimating Direct Costs of Adverse Drug Events.

PubMed

Gyllensten, Hanna; Jönsson, Anna K; Hakkarainen, Katja M; Svensson, Staffan; Hägg, Staffan; Rehnberg, Clas

2017-12-01

To estimate how direct health care costs resulting from adverse drug events (ADEs) and cost distribution are affected by methodological decisions regarding identification of ADEs, assigning relevant resource use to ADEs, and estimating costs for the assigned resources. ADEs were identified from medical records and diagnostic codes for a random sample of 4970 Swedish adults during a 3-month study period in 2008 and were assessed for causality. Results were compared for five cost evaluation methods, including different methods for identifying ADEs, assigning resource use to ADEs, and for estimating costs for the assigned resources (resource use method, proportion of registered cost method, unit cost method, diagnostic code method, and main diagnosis method). Different levels of causality for ADEs and ADEs' contribution to health care resource use were considered. Using the five methods, the maximum estimated overall direct health care costs resulting from ADEs ranged from Sk10,000 (Sk = Swedish krona; ~€1,500 in 2016 values) using the diagnostic code method to more than Sk3,000,000 (~€414,000) using the unit cost method in our study population. The most conservative definitions for ADEs' contribution to health care resource use and the causality of ADEs resulted in average costs per patient ranging from Sk0 using the diagnostic code method to Sk4066 (~€500) using the unit cost method. The estimated costs resulting from ADEs varied considerably depending on the methodological choices. The results indicate that costs for ADEs need to be identified through medical record review and by using detailed unit cost data. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Using Organization Risk Analyzer (ORA) to Explore the Relationship of Nursing Unit Communication to Patient Safety and Quality Outcomes

PubMed Central

Effken, Judith A.; Carley, Kathleen M.; Gephart, Sheila; Verran, Joyce A.; Bianchi, Denise; Reminga, Jeff; Brewer, Barbara

2011-01-01

Purpose We used Organization Risk Analyzer (ORA), a dynamic network analysis tool, to identify patient care unit communication patterns associated with patient safety and quality outcomes. Although ORA had previously had limited use in healthcare, we felt it could effectively model communication on patient care units. Methods Using a survey methodology, we collected communication network data from nursing staff on seven patient care units on two different days. Patient outcome data were collected via a separate survey. Results of the staff survey were used to represent the communication networks for each unit in ORA. We then used ORA's analysis capability to generate communication metrics for each unit. ORA's visualization capability was used to better understand the metrics. Results We identified communication patterns that correlated with two safety (falls and medication errors) and five quality (e.g., symptom management, complex self care, and patient satisfaction) outcome measures. Communication patterns differed substantially by shift. Conclusion The results demonstrate the utility of ORA for healthcare research and the relationship of nursing unit communication patterns to patient safety and quality outcomes. PMID:21536492

STATISTICAL METHODOLOGY FOR THE SIMULTANEOUS ANALYSIS OF MULTIPLE TYPES OF OUTCOMES IN NONLINEAR THRESHOLD MODELS.

EPA Science Inventory

Multiple outcomes are often measured on each experimental unit in toxicology experiments. These multiple observations typically imply the existence of correlation between endpoints, and a statistical analysis that incorporates it may result in improved inference. When both disc...

Human Performance Technology and HRD

ERIC Educational Resources Information Center

Carliner, Saul

2014-01-01

Performance--the achievement of results--is central to definitions of HRD. Performance Technology (HPT) refers to a systematic methodology for developing performance in individuals and organizations. Through a systematic process, HPT explores issues at the organizational, unit, and individual level, and with skills and knowledge, resources, and…

A Survey Examining Photopatch Test and Phototest Methodologies of Contact Dermatologists in the United States: Platform for Developing A Consensus.

PubMed

Asemota, Eseosa; Crawford, Glen; Kovarik, Carrie; Brod, Bruce A

There is currently no standardized protocol for photopatch testing and phototesting in the United States. Certain testing paramaters (such as chemicals tested, time between test application and irradiation, and time of final interpretation) vary from provider to provider. These variations may impact comparability and consistency of test results. The goal of our survey-based study was to outline the photopatch test and phototest protocols used by US contact dermatologists. The information obtained will aid in the development of a national consensus on testing methodologies. Based on a literature search conducted on differences in testing methodologies, we constructed a questionnaire. The survey was distributed at the American Contact Dermatitis Society annual meeting and via the American Contact Dermatitis Society Web site. Standard descriptive analysis was performed on data obtained. Of the 800 dermatologists contacted, 117 agreed to participate in the survey. Among these respondents, 64 (54.8%) conduct photopatch testing. Results of the survey are presented, and they confirm that a variety of techniques and testing materials are used. It would be beneficial to enlist a panel of expert contact dermatologists to create by formal consensus, using these research findings, a standard photopatch test protocol for use in this country.

Accelerated numerical processing of electronically recorded holograms with reduced speckle noise.

PubMed

Trujillo, Carlos; Garcia-Sucerquia, Jorge

2013-09-01

The numerical reconstruction of digitally recorded holograms suffers from speckle noise. An accelerated method that uses general-purpose computing in graphics processing units to reduce that noise is shown. The proposed methodology utilizes parallelized algorithms to record, reconstruct, and superimpose multiple uncorrelated holograms of a static scene. For the best tradeoff between reduction of the speckle noise and processing time, the method records, reconstructs, and superimposes six holograms of 1024 × 1024 pixels in 68 ms; for this case, the methodology reduces the speckle noise by 58% compared with that exhibited by a single hologram. The fully parallelized method running on a commodity graphics processing unit is one order of magnitude faster than the same technique implemented on a regular CPU using its multithreading capabilities. Experimental results are shown to validate the proposal.

Key-Aspects of Scientific Modeling Exemplified by School Science Models: Some Units for Teaching Contextualized Scientific Methodology

ERIC Educational Resources Information Center

Develaki, Maria

2016-01-01

Models and modeling are core elements of scientific methods and consequently also are of key importance for the conception and teaching of scientific methodology. The epistemology of models and its transfer and adaption to nature of science education are not, however, simple themes. We present some conceptual units in which school science models…

Why European and United States drug regulators are not speaking with one voice on anti-influenza drugs: regulatory review methodologies and the importance of 'deep' product reviews.

PubMed

Mulinari, Shai; Davis, Courtney

2017-11-09

Relenza represents the first neuraminidase inhibitor (NI), a class of drugs that also includes the drug Tamiflu. Although heralded as breakthrough treatments in influenza, NI efficacy has remained highly controversial. A key unsettled question is why the United States Food and Drug Administration (FDA) has approved more cautious efficacy statements in labelling than European regulators for both drugs. We conducted a qualitative analysis of United States and European Union regulatory appraisals for Relenza to investigate the reasons for divergent regulatory interpretations, pertaining to Relenza's capacity to alleviate symptoms and reduce frequency of complications of influenza. In Europe, Relenza was evaluated via the so-called national procedure with Sweden as the reference country. We show that FDA reviewers, unlike their European (i.e. Swedish) counterpart, (1) rejected the manufacturer's insistence on pooling efficacy data, (2) remained wary of subgroup analyses, and (3) insisted on stringent statistical analyses. These differences meant that the FDA was less likely to depart from prevailing regulatory and scientific standards in interpreting trial results. We argue that the differences are explained largely by divergent institutionalised review methodologies, i.e. the European regulator's reliance on manufacturer-compiled summaries compared to the FDA's examination of original data and documentation from trials. The FDA's more probing and meticulous evaluative methodology allowed its reviewers to develop 'deep' knowledge concerning the clinical and statistical facets of trials, and more informed opinions regarding suitable methods for analysing trial results. These findings challenge the current emphasis on evaluating regulatory performance mainly in terms of speed of review. We propose that persistent uncertainty and knowledge deficits regarding NIs could have been ameliorated had regulators engaged in the public debates over the drugs' efficacy and explained their contrasting methodologies and judgments. Regulators use major resources to evaluate drugs, but if regulators' assessments are not effectively disseminated and used, resources are used inefficiently.

[Changing medical practices and nosocomial infection rates in French maternity units from 1997 to 2000].

PubMed

Vincent-Boulétreau, A; Caillat-Vallet, E; Dumas, A M; Ayzac, L; Chapuis, C; Emery, M N; Girard, R; Haond, C; Lafarge-Leboucher, J; Tissot-Guerraz, F; Fabry, J

2005-04-01

In this study we describe the changes in medical practices and nosocomial infection rates in obstetrics observed through a surveillance network in the South East of France. The maternity units which belong to this network participated in voluntary surveillance using the network's methodology. The criteria for the diagnosis of nosocomial infections were in accordance with the methods described by the Centers for Disease Control and Prevention. 101240 pregnancies including 18503 caesareans (18.3%) were included in the network from 1997 to 2000. During the study period, nosocomial infection rates following caesarean section and vaginal delivery decreased respectively from 7.8% to 4.3% (p < 0.001) and from 2.2% to 0.9% (p < 0.001). This evolution was compared with the evolution of collected risk factors. In spite of the methodology limits, general value of surveillance and infection control programs in maternity units has been confirmed by the results of this surveillance network. During the study period, both obstetrics-related risk factors for nosocomial infection and observed hospital-acquired infection rates were dramatically reduced, what prove an improvement of quality of care in maternity units.

10 CFR 455.64 - Life-cycle cost methodology.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Life-cycle cost methodology. 455.64 Section 455.64 Energy..., Hospitals, Units of Local Government, and Public Care Institutions § 455.64 Life-cycle cost methodology. (a) The life-cycle cost methodology under § 455.63(b) of this part is a systematic comparison of the...

10 CFR 455.64 - Life-cycle cost methodology.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Life-cycle cost methodology. 455.64 Section 455.64 Energy..., Hospitals, Units of Local Government, and Public Care Institutions § 455.64 Life-cycle cost methodology. (a) The life-cycle cost methodology under § 455.63(b) of this part is a systematic comparison of the...

United States of America Ocean Dumping Report for Calendar Year 1981. Dredged Material.

DTIC Science & Technology

1982-06-01

to monitoring studies under the Disposal Area Monitoring System ( DAHOS ) program. The program is designed to identify and evaluate impacts resulting...sites. The DAHOS program continually contributes to the development of new monitoring methodologies that reflect on the efficiency of field observations

The Kenya rangeland ecological monitoring unit

NASA Technical Reports Server (NTRS)

Stevens, W. E. (Principal Investigator)

1978-01-01

The author has identified the following significant results. Methodology for aerial surveys and ground truth studies was developed, tested, and revised several times to produce reasonably firm methods of procedure. Computer programs were adapted or developed to analyze, store, and recall data from the ground and air monitoring surveys.

14 CFR Appendix A to Part 187 - Methodology for Computation of Fees for Certification Services Performed Outside the United States

Code of Federal Regulations, 2013 CFR

2013-01-01

... hours of a U.S. Federal Government employee. This result in the hourly government paid cost of an... average annual leave hours and 1,800 average annual hours available for work for computer manpower...

Challenging the Stereotypes of Mexican American Fathers

ERIC Educational Resources Information Center

Saracho, Olivia N.; Spodek, Bernard

2007-01-01

This critical review presents studies of Mexican American fathers in the United Sates to provide researchers with an understanding of contemporary fatherhood. It describes the myths that cause methodological and conceptual problems in interpreting the results of studies on Mexican American fathers. Several common challenges and limitations in…

Measuring geographical accessibility to rural and remote health care services: Challenges and considerations.

PubMed

Shah, Tayyab Ikram; Milosavljevic, Stephan; Bath, Brenna

2017-06-01

This research is focused on methodological challenges and considerations associated with the estimation of the geographical aspects of access to healthcare with a focus on rural and remote areas. With the assumption that GIS-based accessibility measures for rural healthcare services will vary across geographic units of analysis and estimation techniques, which could influence the interpretation of spatial access to rural healthcare services. Estimations of geographical accessibility depend on variations of the following three parameters: 1) quality of input data; 2) accessibility method; and 3) geographical area. This research investigated the spatial distributions of physiotherapists (PTs) in comparison to family physicians (FPs) across Saskatchewan, Canada. The three-steps floating catchment areas (3SFCA) method was applied to calculate the accessibility scores for both PT and FP services at two different geographical units. A comparison of accessibility scores to simple healthcare provider-to-population ratios was also calculated. The results vary considerably depending on the accessibility methods used and the choice of geographical area unit for measuring geographical accessibility for both FP and PT services. These findings raise intriguing questions regarding the nature and extent of technical issues and methodological considerations that can affect GIS-based measures in health services research and planning. This study demonstrates how the selection of geographical areal units and different methods for measuring geographical accessibility could affect the distribution of healthcare resources in rural areas. These methodological issues have implications for determining where there is reduced access that will ultimately impact health human resource priorities and policies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessment of methodologies for analysis of the dungeness B accidental aircraft crash risk.

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaChance, Jeffrey L.; Hansen, Clifford W.

2010-09-01

The Health and Safety Executive (HSE) has requested Sandia National Laboratories (SNL) to review the aircraft crash methodology for nuclear facilities that are being used in the United Kingdom (UK). The scope of the work included a review of one method utilized in the UK for assessing the potential for accidental airplane crashes into nuclear facilities (Task 1) and a comparison of the UK methodology against similar International Atomic Energy Agency (IAEA), United States (US) Department of Energy (DOE), and the US Nuclear Regulatory Commission (NRC) methods (Task 2). Based on the conclusions from Tasks 1 and 2, an additionalmore » Task 3 would provide an assessment of a site-specific crash frequency for the Dungeness B facility using one of the other methodologies. This report documents the results of Task 2. The comparison of the different methods was performed for the three primary contributors to aircraft crash risk at the Dungeness B site: airfield related crashes, crashes below airways, and background crashes. The methods and data specified in each methodology were compared for each of these risk contributors, differences in the methodologies were identified, and the importance of these differences was qualitatively and quantitatively assessed. The bases for each of the methods and the data used were considered in this assessment process. A comparison of the treatment of the consequences of the aircraft crashes was not included in this assessment because the frequency of crashes into critical structures is currently low based on the existing Dungeness B assessment. Although the comparison found substantial differences between the UK and the three alternative methodologies (IAEA, NRC, and DOE) this assessment concludes that use of any of these alternative methodologies would not change the conclusions reached for the Dungeness B site. Performance of Task 3 is thus not recommended.« less

Methodological issues associated with clinical trials in epilepsy.

PubMed

Ferlazzo, Edoardo; Sueri, Chiara; Gasparini, Sara; Russo, Emilio; Cianci, Vittoria; Ascoli, Michele; De Sarro, Giovambattista; Aguglia, Umberto

2017-10-01

despite methodological advances in epilepsy clinical trials, the proportion of patients reaching seizure-freedom has not substantially changed over the years. We review the main methodological limitations of current trials, the possible strategies to overcome these limits, and the issues that need to be addressed in next future. Area covered: references were identified by PubMed search until March 2017 and unpublished literature was searched on ClinicalTrials.gov. Add-on trials mainly involve refractory epilepsy subjects, reducing overall response to the investigational drug. The inclusion of subjects with earlier disease from less developed countries has partially allowed overcoming this limitation, but has introduced more random variability of results. Monotherapy trials rise methodological, economical, and ethical concerns with different regulatory requirements in European Union and in the United States of America. Newer trial designs, such as futility trials or 'time-to-event' design, have been implemented. Moreover, both add-on and monotherapy trials results might be affected by patient's ability to recognize and record seizures, and by randomness of seizures occurrence over time. Possible strategies to achieve more reliable outcomes are detailed. Expert commentary: clinical trial methodology needs to be optimized to better address regulatory agencies requirements and to encounter both patients' and clinicians' needs.

TAPping into argumentation: Developments in the application of Toulmin's Argument Pattern for studying science discourse

NASA Astrophysics Data System (ADS)

Erduran, Sibel; Simon, Shirley; Osborne, Jonathan

2004-11-01

This paper reports some methodological approaches to the analysis of argumentation discourse developed as part of the two-and-a-half year project titled Enhancing the Quality of Argument in School Scienc'' supported by the Economic and Social Research Council in the United Kingdom. In this project researchers collaborated with middle-school science teachers to develop models of instructional activities in an effort to make argumentation a component of instruction. We begin the paper with a brief theoretical justification for why we consider argumentation to be of significance to science education. We then contextualize the use of Toulmin's Argument Pattern in the study of argumentation discourse and provide a justification for the methodological outcomes our approach generates. We illustrate how our work refines and develops research methodologies in argumentation analysis. In particular, we present two methodological approaches to the analysis of argumentation resulting in whole-class as well as small-group student discussions. For each approach, we illustrate our coding scheme and some results as well as how our methodological approach has enabled our inquiry into the quality of argumentation in the classroom. We conclude with some implications for future research in argumentation in science education.

Estimating Renewable Energy Economic Potential in the United States: Methodology and Initial Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Austin; Beiter, Philipp; Heimiller, Donna

The report describes a geospatial analysis method to estimate the economic potential of several renewable resources available for electricity generation in the United States. Economic potential, one measure of renewable generation potential, is defined in this report as the subset of the available resource technical potential where the cost required to generate the electricity (which determines the minimum revenue requirements for development of the resource) is below the revenue available in terms of displaced energy and displaced capacity.

A systematic review of suicide prevention interventions targeting indigenous peoples in Australia, United States, Canada and New Zealand

PubMed Central

2013-01-01

Background Indigenous peoples of Australia, Canada, United States and New Zealand experience disproportionately high rates of suicide. As such, the methodological quality of evaluations of suicide prevention interventions targeting these Indigenous populations should be rigorously examined, in order to determine the extent to which they are effective for reducing rates of Indigenous suicide and suicidal behaviours. This systematic review aims to: 1) identify published evaluations of suicide prevention interventions targeting Indigenous peoples in Australia, Canada, United States and New Zealand; 2) critique their methodological quality; and 3) describe their main characteristics. Methods A systematic search of 17 electronic databases and 13 websites for the period 1981–2012 (inclusive) was undertaken. The reference lists of reviews of suicide prevention interventions were hand-searched for additional relevant studies not identified by the electronic and web search. The methodological quality of evaluations of suicide prevention interventions was assessed using a standardised assessment tool. Results Nine evaluations of suicide prevention interventions were identified: five targeting Native Americans; three targeting Aboriginal Australians; and one First Nation Canadians. The main intervention strategies employed included: Community Prevention, Gatekeeper Training, and Education. Only three of the nine evaluations measured changes in rates of suicide or suicidal behaviour, all of which reported significant improvements. The methodological quality of evaluations was variable. Particular problems included weak study designs, reliance on self-report measures, highly variable consent and follow-up rates, and the absence of economic or cost analyses. Conclusions There is an urgent need for an increase in the number of evaluations of preventive interventions targeting reductions in Indigenous suicide using methodologically rigorous study designs across geographically and culturally diverse Indigenous populations. Combining and tailoring best evidence and culturally-specific individual strategies into one coherent suicide prevention program for delivery to whole Indigenous communities and/or population groups at high risk of suicide offers considerable promise. PMID:23663493

A Simulation-Based Methodology for Developing a Standarized Design Template for Future Battle Command Training Centers

DTIC Science & Technology

2006-06-01

result of changes that run the gamut from space and staff levels to changes in training requirements to the unit composition on a particular...required of them, as well as a simulation tool that can identify the potential impacts on training as a result of changes that run the gamut from space

Digital database architecture and delineation methodology for deriving drainage basins, and a comparison of digitally and non-digitally derived numeric drainage areas

USGS Publications Warehouse

Dupree, Jean A.; Crowfoot, Richard M.

2012-01-01

The drainage basin is a fundamental hydrologic entity used for studies of surface-water resources and during planning of water-related projects. Numeric drainage areas published by the U.S. Geological Survey water science centers in Annual Water Data Reports and on the National Water Information Systems (NWIS) Web site are still primarily derived from hard-copy sources and by manual delineation of polygonal basin areas on paper topographic map sheets. To expedite numeric drainage area determinations, the Colorado Water Science Center developed a digital database structure and a delineation methodology based on the hydrologic unit boundaries in the National Watershed Boundary Dataset. This report describes the digital database architecture and delineation methodology and also presents the results of a comparison of the numeric drainage areas derived using this digital methodology with those derived using traditional, non-digital methods. (Please see report for full Abstract)

SCAP: a new methodology for safety management based on feedback from credible accident-probabilistic fault tree analysis system.

PubMed

Khan, F I; Iqbal, A; Ramesh, N; Abbasi, S A

2001-10-12

As it is conventionally done, strategies for incorporating accident--prevention measures in any hazardous chemical process industry are developed on the basis of input from risk assessment. However, the two steps-- risk assessment and hazard reduction (or safety) measures--are not linked interactively in the existing methodologies. This prevents a quantitative assessment of the impacts of safety measures on risk control. We have made an attempt to develop a methodology in which risk assessment steps are interactively linked with implementation of safety measures. The resultant system tells us the extent of reduction of risk by each successive safety measure. It also tells based on sophisticated maximum credible accident analysis (MCAA) and probabilistic fault tree analysis (PFTA) whether a given unit can ever be made 'safe'. The application of the methodology has been illustrated with a case study.

State Higher Education Budgeting Mechanisms in the United States

ERIC Educational Resources Information Center

Mizuta, Kensuke; Yoshida, Kana; Yanagiura, Takeshi

2010-01-01

(Purpose) The purpose of this study was to examine the correlation between certain characteristics of US states and their budgeting systems for higher education (HE), and to derive implications for Japanese HE budgeting policy from the results. (Methodology) The US's State Higher Education Executive Officers (SHEEO) conducted a 30-item…

Building on Our Teaching Assets: The Unique Pedagogical Contributions of Bilingual Educators

ERIC Educational Resources Information Center

Hopkins, Megan

2013-01-01

This article examines the unique contributions that bilingual and bilingually credentialed teachers make to the instruction of emergent bilinguals in the United States. This mixed methodological study involved 474 teachers in Arizona, California, and Texas, which represent distinct language policy contexts. Results revealed that, irrespective of…

A Cross-Cultural Analysis of Children's Television Use.

ERIC Educational Resources Information Center

Zohoori, Ali Reza

1988-01-01

Describes a 1981 study that compared uses of U.S. television by foreign children residing in the United States and American children in light of theories of acculturation, cultivation, and uses and gratifications. Children's television viewing is discussed, research methodology is described, and results are analyzed. (22 references) (Author/LRW)

Independent Evaluation of Heavy-Truck Safety Applications Based on Vehicle-to-Vehicle and Vehicle-to-Infrastructure Communications Used in the Safety Pilot Model Deployment

DOT National Transportation Integrated Search

2016-01-01

This report presents the methodology and results of the independent evaluation of heavy trucks (HTs) in the Safety Pilot Model Deployment (SPMD); part of the United States Department of Transportations Intelligent Transportation Systems research p...

Independent evaluation of light-vehicle safety applications based on vehicle-to-vehicle communications used in the 2012-2013 safety pilot model deployment

DOT National Transportation Integrated Search

2015-12-01

This report presents the methodology and results of the independent evaluation of safety applications for passenger vehicles in the 2012-2013 Safety Pilot Model Deployment, part of the United States Department of Transportations Intelligent Transp...

[Regulations for decontamination of surfaces polluted as a result of chemical accidents (concept approaches)].

PubMed

Filatov, B N; Britanov, N G; Tochilkina, L P; Zhukov, V E; Maslennikov, A A; Ignatenko, M N; Volchek, K

2011-01-01

The threat of industrial chemical accidents and terrorist attacks requires the development of safety regulations for the cleanup of contaminated surfaces. This paper presents principles and a methodology for the development of a new toxicological parameter, "relative value unit" (RVU) as the primary decontamination standard.

The Relationship between Elementary Principals' Visionary Leadership and Students' Reading Performance

ERIC Educational Resources Information Center

Mora-Whitehurst, Rina

2013-01-01

This article focuses on elementary principals as instructional leaders, as well as public school initiatives and educational accountability in the United States. It presents the methodology, instrumentation, measures of academic achievement in Florida, data collection, and processing procedures. Finally, it presents data analysis, results of the…

Time-series intervention analysis of pedestrian countdown timer effects.

PubMed

Huitema, Bradley E; Van Houten, Ron; Manal, Hana

2014-11-01

Pedestrians account for 40-50% of traffic fatalities in large cities. Several previous studies based on relatively small samples have concluded that Pedestrian Countdown Timers (PCT) may reduce pedestrian crashes at signalized intersections, but other studies report no reduction. The purposes of the present article are to (1) describe a new methodology to evaluate the effectiveness of introducing PCT signals and (2) to present results of applying this methodology to pedestrian crash data collected in a large study carried out in Detroit, Michigan. The study design incorporated within-unit as well as between-unit components. The main focus was on dynamic effects that occurred within the PCT unit of 362 treated sites during the 120 months of the study. An interrupted time-series analysis was developed to evaluate whether change in crash frequency depended upon of the degree to which the countdown timers penetrated the treatment unit. The between-unit component involved comparisons between the treatment unit and a control unit. The overall conclusion is that the introduction of PCT signals in Detroit reduced pedestrian crashes to approximately one-third of the preintervention level. The evidence for this reductionis strong and the change over time was shown to be a function of the extent to which the timers were introduced during the intervention period. There was no general drop-off in crash frequency throughout the baseline interval of over five years; only when the PCT signals were introduced in large numbers was consistent and convincing crash reduction observed. Correspondingly, there was little evidence of change in the control unit. Copyright © 2014. Published by Elsevier Ltd.

Rare disease surveillance: An international perspective

PubMed Central

Elliott, Elizabeth J; Nicoll, Angus; Lynn, Richard; Marchessault, Victor; Hirasing, Remy; Ridley, Greta

2001-01-01

BACKGROUND: The International Network of Paediatric Surveillance Units (INoPSU) was established in 1998 and met formally for the first time in Ottawa, Ontario in June 2000. OBJECTIVES: To document the methodology and activities of existing national paediatric surveillance units; the formation of INoPSU; the diseases studied by INoPSU members; and the impact of such studies on education, public health and paediatric practice. METHODS: Directors of paediatric surveillance units in Australia, Britain, Canada, Germany, the Netherlands, Latvia, Malaysia, Papua New Guinea, New Zealand and Switzerland were asked to provide information on each unit’s affiliations, funding and staffing; the method of case ascertainment, the mailing list and response rates; and diseases studied. Original articles that reported data derived from units were identified by a search of an electronic database (MEDLINE), and additional information was obtained from units’ annual reports. RESULTS: Worldwide, 10 units (established from 1986 to 1997), use active national surveillance of more than 8500 clinicians each month to identify cases of rare or uncommon diseases in a childhood population (younger than 15 years of age) of over 47 million (monthly response rate 73% to 98%). By January 1999, units had initiated 147 studies on 103 different conditions, and 63 studies were completed. CONCLUSION: INoPSU enhances collaboration among units from four continents, providing a unique opportunity for simultaneous cross-sectional studies of rare diseases in populations with diverse geographical and ethnic characteristics. It facilitates the sharing of ideas regarding current methodology, ethics, the most appropriate means of evaluating units and their potential application. PMID:20084246

The cost of energy from utility-owned solar electric systems. A required revenue methodology for ERDA/EPRI evaluations

NASA Technical Reports Server (NTRS)

1976-01-01

This methodology calculates the electric energy busbar cost from a utility-owned solar electric system. This approach is applicable to both publicly- and privately-owned utilities. Busbar cost represents the minimum price per unit of energy consistent with producing system-resultant revenues equal to the sum of system-resultant costs. This equality is expressed in present value terms, where the discount rate used reflects the rate of return required on invested capital. Major input variables describe the output capabilities and capital cost of the energy system, the cash flows required for system operation amd maintenance, and the financial structure and tax environment of the utility.

A methodology for risk analysis based on hybrid Bayesian networks: application to the regasification system of liquefied natural gas onboard a floating storage and regasification unit.

PubMed

Martins, Marcelo Ramos; Schleder, Adriana Miralles; Droguett, Enrique López

2014-12-01

This article presents an iterative six-step risk analysis methodology based on hybrid Bayesian networks (BNs). In typical risk analysis, systems are usually modeled as discrete and Boolean variables with constant failure rates via fault trees. Nevertheless, in many cases, it is not possible to perform an efficient analysis using only discrete and Boolean variables. The approach put forward by the proposed methodology makes use of BNs and incorporates recent developments that facilitate the use of continuous variables whose values may have any probability distributions. Thus, this approach makes the methodology particularly useful in cases where the available data for quantification of hazardous events probabilities are scarce or nonexistent, there is dependence among events, or when nonbinary events are involved. The methodology is applied to the risk analysis of a regasification system of liquefied natural gas (LNG) on board an FSRU (floating, storage, and regasification unit). LNG is becoming an important energy source option and the world's capacity to produce LNG is surging. Large reserves of natural gas exist worldwide, particularly in areas where the resources exceed the demand. Thus, this natural gas is liquefied for shipping and the storage and regasification process usually occurs at onshore plants. However, a new option for LNG storage and regasification has been proposed: the FSRU. As very few FSRUs have been put into operation, relevant failure data on FSRU systems are scarce. The results show the usefulness of the proposed methodology for cases where the risk analysis must be performed under considerable uncertainty. © 2014 Society for Risk Analysis.

Tracking and Control of Gas Turbine Engine Component Damage/Life

NASA Technical Reports Server (NTRS)

Jaw, Link C.; Wu, Dong N.; Bryg, David J.

2003-01-01

This paper describes damage mechanisms and the methods of controlling damages to extend the on-wing life of critical gas turbine engine components. Particularly, two types of damage mechanisms are discussed: creep/rupture and thermo-mechanical fatigue. To control these damages and extend the life of engine hot-section components, we have investigated two methodologies to be implemented as additional control logic for the on-board electronic control unit. This new logic, the life-extending control (LEC), interacts with the engine control and monitoring unit and modifies the fuel flow to reduce component damages in a flight mission. The LEC methodologies were demonstrated in a real-time, hardware-in-the-loop simulation. The results show that LEC is not only a new paradigm for engine control design, but also a promising technology for extending the service life of engine components, hence reducing the life cycle cost of the engine.

ESP v1.0: Methodology for Exploring Emission Impacts of Future Scenarios in the United States

EPA Science Inventory

This article presents a methodology for creating anthropogenic emission inventories that can be used to simulate future regional air quality. The Emission Scenario Projection (ESP) methodology focuses on energy production and use, the principal sources of many air pollutants. Emi...

Modeling Operations Other Than War: Non-Combatants in Combat Modeling

DTIC Science & Technology

1994-09-01

supposition that non-combatants are an essential feature in OOTW. The model proposal includes a methodology for civilian unit decision making . The model...combatants are an essential feature in OOTW. The model proposal includes a methodology for civilian unit decision making . Thi- model also includes...numerical example demonstrated that the model appeared to perform in an acceptable manner, in that it produced output within a reasonable range. During the

Development of a Probabilistic Tornado Wind Hazard Model for the Continental United States Volume I: Main Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boissonnade, A; Hossain, Q; Kimball, J

Since the mid-l980's, assessment of the wind and tornado risks at the Department of Energy (DOE) high and moderate hazard facilities has been based on the straight wind/tornado hazard curves given in UCRL-53526 (Coats, 1985). These curves were developed using a methodology that utilized a model, developed by McDonald, for severe winds at sub-tornado wind speeds and a separate model, developed by Fujita, for tornado wind speeds. For DOE sites not covered in UCRL-53526, wind and tornado hazard assessments are based on the criteria outlined in DOE-STD-1023-95 (DOE, 1996), utilizing the methodology in UCRL-53526; Subsequent to the publication of UCRL53526,more » in a study sponsored by the Nuclear Regulatory Commission (NRC), the Pacific Northwest Laboratory developed tornado wind hazard curves for the contiguous United States, NUREG/CR-4461 (Ramsdell, 1986). Because of the different modeling assumptions and underlying data used to develop the tornado wind information, the wind speeds at specified exceedance levels, at a given location, based on the methodology in UCRL-53526, are different than those based on the methodology in NUREG/CR-4461. In 1997, Lawrence Livermore National Laboratory (LLNL) was funded by the DOE to review the current methodologies for characterizing tornado wind hazards and to develop a state-of-the-art wind/tornado characterization methodology based on probabilistic hazard assessment techniques and current historical wind data. This report describes the process of developing the methodology and the database of relevant tornado information needed to implement the methodology. It also presents the tornado wind hazard curves obtained from the application of the method to DOE sites throughout the contiguous United States.« less

Combined UMC- DFT prediction of electron-hole coupling in unit cells of pentacene crystals.

PubMed

Leal, Luciano Almeida; de Souza Júnior, Rafael Timóteo; de Almeida Fonseca, Antonio Luciano; Ribeiro Junior, Luiz Antonio; Blawid, Stefan; da Silva Filho, Demetrio Antonio; da Cunha, Wiliam Ferreira

2017-05-01

Pentacene is an organic semiconductor that draws special attention from the scientific community due to the high mobility of its charge carriers. As electron-hole interactions are important aspects in the regard of such property, a computationally inexpensive method to predict the coupling between these quasi-particles is highly desired. In this work, we propose a hybrid methodology of combining Uncoupled Monte Carlo Simulations (UMC) and Density functional Theory (DFT) methodologies to obtain a good compromise between computational feasibility and accuracy. As a first step in considering a Pentacene crystal, we describe its unit cell: the Pentacene Dimer. Because many conformations can be encountered for the dimer and considering the complexity of the system, we make use of UMC in order to find the most probable structures and relative orientations for the Pentacene-Pentacene complex. Following, we carry out electronic structure calculations in the scope of DFT with the goal of describing the electron-hole coupling on the most probable configurations obtained by UMC. The comparison of our results with previously reported data on the literature suggests that the methodology is well suited for describing transfer integrals of organic semiconductors. The observed accuracy together with the smaller computational cost required by our approach allows us to conclude that such methodology might be an important tool towards the description of systems with higher complexity.

A multicriteria-based methodology for site prioritisation in sediment management.

PubMed

Alvarez-Guerra, Manuel; Viguri, Javier R; Voulvoulis, Nikolaos

2009-08-01

Decision-making for sediment management is a complex task that incorporates the selections of areas for remediation and the assessment of options for any mitigation required. The application of Multicriteria Analysis (MCA) to rank different areas, according to their need for sediment management, provides a great opportunity for prioritisation, a first step in an integrated methodology that finally aims to assess and select suitable alternatives for managing the identified priority sites. This paper develops a methodology that starts with the delimitation of management units within areas of study, followed by the application of MCA methods that allows ranking of these management units, according to their need for remediation. This proposed process considers not only scientific evidence on sediment quality, but also other relevant aspects such as social and economic criteria associated with such decisions. This methodology is illustrated with its application to the case study area of the Bay of Santander, in northern Spain, highlighting some of the implications of utilising different MCA methods in the process. It also uses site-specific data to assess the subjectivity in the decision-making process, mainly reflected through the assignment of the criteria weights and uncertainties in the criteria scores. Analysis of the sensitivity of the results to these factors is used as a way to assess the stability and robustness of the ranking as a first step of the sediment management decision-making process.

A methodology for obtaining on-orbit SI-traceable spectral radiance measurements in the thermal infrared

NASA Astrophysics Data System (ADS)

Dykema, John A.; Anderson, James G.

2006-06-01

A methodology to achieve spectral thermal radiance measurements from space with demonstrable on-orbit traceability to the International System of Units (SI) is described. This technique results in measurements of infrared spectral radiance R(\\tilde {\\upsilon }) , with spectral index \\tilde {\\upsilon } in cm-1, with a relative combined uncertainty u_c[R(\\tilde {\\upsilon })] of 0.0015 (k = 1) for the average mid-infrared radiance emitted by the Earth. This combined uncertainty, expressed in brightness temperature units, is equivalent to ±0.1 K at 250 K at 750 cm-1. This measurement goal is achieved by utilizing a new method for infrared scale realization combined with an instrument design optimized to minimize component uncertainties and admit tests of radiometric performance. The SI traceability of the instrument scale is established by evaluation against source-based and detector-based infrared scales in defined laboratory protocols before launch. A novel strategy is executed to ensure fidelity of on-orbit calibration to the pre-launch scale. This strategy for on-orbit validation relies on the overdetermination of instrument calibration. The pre-launch calibration against scales derived from physically independent paths to the base SI units provides the foundation for a critical analysis of the overdetermined on-orbit calibration to establish an SI-traceable estimate of the combined measurement uncertainty. Redundant calibration sources and built-in diagnostic tests to assess component measurement uncertainties verify the SI traceability of the instrument calibration over the mission lifetime. This measurement strategy can be realized by a practical instrument, a prototype Fourier-transform spectrometer under development for deployment on a small satellite. The measurement record resulting from the methodology described here meets the observational requirements for climate monitoring and climate model testing and improvement.

Advancing scoping study methodology: a web-based survey and consultation of perceptions on terminology, definition and methodological steps.

PubMed

O'Brien, Kelly K; Colquhoun, Heather; Levac, Danielle; Baxter, Larry; Tricco, Andrea C; Straus, Sharon; Wickerson, Lisa; Nayar, Ayesha; Moher, David; O'Malley, Lisa

2016-07-26

Scoping studies (or reviews) are a method used to comprehensively map evidence across a range of study designs in an area, with the aim of informing future research practice, programs and policy. However, no universal agreement exists on terminology, definition or methodological steps. Our aim was to understand the experiences of, and considerations for conducting scoping studies from the perspective of academic and community partners. Primary objectives were to 1) describe experiences conducting scoping studies including strengths and challenges; and 2) describe perspectives on terminology, definition, and methodological steps. We conducted a cross-sectional web-based survey with clinicians, educators, researchers, knowledge users, representatives from community-based organizations, graduate students, and policy stakeholders with experience and/or interest in conducting scoping studies to gain an understanding of experiences and perspectives on the conduct and reporting of scoping studies. We administered an electronic self-reported questionnaire comprised of 22 items related to experiences with scoping studies, strengths and challenges, opinions on terminology, and methodological steps. We analyzed questionnaire data using descriptive statistics and content analytical techniques. Survey results were discussed during a multi-stakeholder consultation to identify key considerations in the conduct and reporting of scoping studies. Of the 83 invitations, 54 individuals (65 %) completed the scoping questionnaire, and 48 (58 %) attended the scoping study meeting from Canada, the United Kingdom and United States. Many scoping study strengths were dually identified as challenges including breadth of scope, and iterative process. No consensus on terminology emerged, however key defining features that comprised a working definition of scoping studies included the exploratory mapping of literature in a field; iterative process, inclusion of grey literature; no quality assessment of included studies, and an optional consultation phase. We offer considerations for the conduct and reporting of scoping studies for researchers, clinicians and knowledge users engaging in this methodology. Lack of consensus on scoping terminology, definition and methodological steps persists. Reasons for this may be attributed to diversity of disciplines adopting this methodology for differing purposes. Further work is needed to establish guidelines on the reporting and methodological quality assessment of scoping studies.

A systematic review on the affordability of a healthful diet for families in the United States.

PubMed

Horning, Melissa L; Fulkerson, Jayne A

2015-01-01

As obesity rates remain alarmingly high, the importance of healthful diets is emphasized; however, affordability of such diets is disputed. Market basket surveys (MBSs) investigate the affordability of diets for families that meet minimum daily dietary requirements using actual food prices from grocery stores. This review paper describes the methods of MBSs, summarizes methodology, price and affordability findings, limitations, and suggests related policy and practice implications. This is a systematic review of 16 MBSs performed in the United States from 1985 to 2012. A comprehensive multidisciplinary database search strategy was used to identify articles meeting inclusion criteria. Results indicated MBS methodology varied across studies and price data indicated healthful diets for families are likely unaffordable when purchased from small- to medium-sized stores and may be unaffordable in larger stores when compared to the Thrifty Food Plan. Using a social ecological approach, public health nurses and all public health professionals are prime advocates for increased affordability of healthful foods. This study includes policy advocacy, particularly in support of Supplemental Nutrition Assistance Program benefits for low-income families. Future research implications are provided, including methodological recommendations for consistency and quality of forthcoming MBS research. © 2014 Wiley Periodicals, Inc.

A simple methodology to produce flood risk maps consistent with FEMA's base flood elevation maps: Implementation and validation over the entire contiguous United States

NASA Astrophysics Data System (ADS)

Goteti, G.; Kaheil, Y. H.; Katz, B. G.; Li, S.; Lohmann, D.

2011-12-01

In the United States, government agencies as well as the National Flood Insurance Program (NFIP) use flood inundation maps associated with the 100-year return period (base flood elevation, BFE), produced by the Federal Emergency Management Agency (FEMA), as the basis for flood insurance. A credibility check of the flood risk hydraulic models, often employed by insurance companies, is their ability to reasonably reproduce FEMA's BFE maps. We present results from the implementation of a flood modeling methodology aimed towards reproducing FEMA's BFE maps at a very fine spatial resolution using a computationally parsimonious, yet robust, hydraulic model. The hydraulic model used in this study has two components: one for simulating flooding of the river channel and adjacent floodplain, and the other for simulating flooding in the remainder of the catchment. The first component is based on a 1-D wave propagation model, while the second component is based on a 2-D diffusive wave model. The 1-D component captures the flooding from large-scale river transport (including upstream effects), while the 2-D component captures the flooding from local rainfall. The study domain consists of the contiguous United States, hydrologically subdivided into catchments averaging about 500 km2 in area, at a spatial resolution of 30 meters. Using historical daily precipitation data from the Climate Prediction Center (CPC), the precipitation associated with the 100-year return period event was computed for each catchment and was input to the hydraulic model. Flood extent from the FEMA BFE maps is reasonably replicated by the 1-D component of the model (riverine flooding). FEMA's BFE maps only represent the riverine flooding component and are unavailable for many regions of the USA. However, this modeling methodology (1-D and 2-D components together) covers the entire contiguous USA. This study is part of a larger modeling effort from Risk Management Solutions° (RMS) to estimate flood risk associated with extreme precipitation events in the USA. Towards this greater objective, state-of-the-art models of flood hazard and stochastic precipitation are being implemented over the contiguous United States. Results from the successful implementation of the modeling methodology will be presented.

Return on Investment for the United States Navy’s Training with Industry Program

DTIC Science & Technology

2017-06-01

methodologies, an adaptable metric was developed for NAVSUP. The net benefit of the program divided by the program costs results in an ROI of 88... costs results in an ROI of 88%. Additional intangible benefits obtained include meeting capability gaps, meeting NAVSUP’s objectives, and increasing...Measure All Training Costs and Benefits .....................36 7. Step 7: Full Training Report

Links between Different Measures of Mother/Father Involvement and Child Social Adjustment

ERIC Educational Resources Information Center

Dubeau, Diane; Coutu, Sylvain; Lavigueur, Suzanne

2013-01-01

The relative integration of fathers into the parental unit clearly poses numerous conceptual and methodological challenges despite the considerable progress that has been made in this area. Important social changes that have occurred over a relatively short period of time have resulted in a redefinition of parental roles which supports the…

Factors that affect implementation of a nurse staffing directive: results from a qualitative multi-case evaluation.

PubMed

Robinson, Claire H; Annis, Ann M; Forman, Jane; Krein, Sarah L; Yankey, Nicholas; Duffy, Sonia A; Taylor, Beth; Sales, Anne E

2016-08-01

To assess implementation of the Veterans Health Administration staffing methodology directive. In 2010 the Veterans Health Administration promulgated a staffing methodology directive for inpatient nursing units to address staffing and budget forecasting. A qualitative multi-case evaluation approach assessed staffing methodology implementation. Semi-structured telephone interviews were conducted from March - June 2014 with Nurse Executives and their teams at 21 facilities. Interviews focused on the budgeting process, implementation experiences, use of data, leadership support, and training. An implementation score was created for each facility using a 4-point rating scale. The scores were used to select three facilities (low, medium and high implementation) for more detailed case studies. After analysing interview summaries, the evaluation team developed a four domain scoring structure: (1) integration of staffing methodology into budget development; (2) implementation of the Directive elements; (3) engagement of leadership and staff; and (4) use of data to support the staffing methodology process. The high implementation facility had leadership understanding and endorsement of staffing methodology, confidence in and ability to work with data, and integration of staffing methodology results into the budgeting process. The low implementation facility reported poor leadership engagement and little understanding of data sources and interpretation. Implementation varies widely across facilities. Implementing staffing methodology in facilities with complex and changing staffing needs requires substantial commitment at all organizational levels especially for facilities that have traditionally relied on historical levels to budget for staffing. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.

A healthcare Lean Six Sigma System for postanesthesia care unit workflow improvement.

PubMed

Kuo, Alex Mu-Hsing; Borycki, Elizabeth; Kushniruk, Andre; Lee, Te-Shu

2011-01-01

The aim of this article is to propose a new model called Healthcare Lean Six Sigma System that integrates Lean and Six Sigma methodologies to improve workflow in a postanesthesia care unit. The methodology of the proposed model is fully described. A postanesthesia care unit case study is also used to demonstrate the benefits of using the Healthcare Lean Six Sigma System model by combining Lean and Six Sigma methodologies together. The new model bridges the service gaps between health care providers and patients, balances the requirements of health care managers, and delivers health care services to patients by taking the benefits of the Lean speed and Six Sigma high-quality principles. The full benefits of the new model will be realized when applied at both strategic and operational levels. For further research, we will examine how the proposed model is used in different real-world case studies.

Analysis of the methods for assessing socio-economic development level of urban areas

NASA Astrophysics Data System (ADS)

Popova, Olga; Bogacheva, Elena

2017-01-01

The present paper provides a targeted analysis of current approaches (ratings) in the assessment of socio-economic development of urban areas. The survey focuses on identifying standardized methodologies to area assessment techniques formation that will result in developing the system of intelligent monitoring, dispatching, building management, scheduling and effective management of an administrative-territorial unit. This system is characterized by complex hierarchical structure, including tangible and intangible properties (parameters, attributes). Investigating the abovementioned methods should increase the administrative-territorial unit's attractiveness for investors and residence. The research aims at studying methods for evaluating socio-economic development level of the Russian Federation territories. Experimental and theoretical territory estimating methods were revealed. Complex analysis of the characteristics of the areas was carried out and evaluation parameters were determined. Integral indicators (resulting rating criteria values) as well as the overall rankings (parameters, characteristics) were analyzed. The inventory of the most widely used partial indicators (parameters, characteristics) of urban areas was revealed. The resulting criteria of rating values homogeneity were verified and confirmed by determining the root mean square deviation, i.e. divergence of indices. The principal shortcomings of assessment methodologies were revealed. The assessment methods with enhanced effectiveness and homogeneity were proposed.

A Methodology for Calculating EGS Electricity Generation Potential Based on the Gringarten Model for Heat Extraction From Fractured Rock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Augustine, Chad

Existing methodologies for estimating the electricity generation potential of Enhanced Geothermal Systems (EGS) assume thermal recovery factors of 5% or less, resulting in relatively low volumetric electricity generation potentials for EGS reservoirs. This study proposes and develops a methodology for calculating EGS electricity generation potential based on the Gringarten conceptual model and analytical solution for heat extraction from fractured rock. The electricity generation potential of a cubic kilometer of rock as a function of temperature is calculated assuming limits on the allowed produced water temperature decline and reservoir lifetime based on surface power plant constraints. The resulting estimates of EGSmore » electricity generation potential can be one to nearly two-orders of magnitude larger than those from existing methodologies. The flow per unit fracture surface area from the Gringarten solution is found to be a key term in describing the conceptual reservoir behavior. The methodology can be applied to aid in the design of EGS reservoirs by giving minimum reservoir volume, fracture spacing, number of fractures, and flow requirements for a target reservoir power output. Limitations of the idealized model compared to actual reservoir performance and the implications on reservoir design are discussed.« less

Psychobiological operationalization of RDoC constructs: Methodological and conceptual opportunities and challenges.

PubMed

MacNamara, Annmarie; Phan, K Luan

2016-03-01

NIMH's Research Domain Criteria (RDoC) project seeks to advance the diagnosis, prevention, and treatment of mental disorders by promoting psychobiological research on dimensional constructs that might cut across traditional diagnostic boundaries (Kozak & Cuthbert, ). At the core of this approach is the notion that these dimensional constructs can be assessed across different units of analysis (e.g., genes, physiology, behavior), enriching the constructs and providing more complete explanations of clinical problems. While the conceptual aspects of RDoC have been discussed in several prior papers, its methodological aspects have received comparatively less attention. For example, how to integrate data from different units of analysis has been relatively unclear. Here, we discuss one means of psychobiologically operationalizing RDoC constructs across different units of analysis (the psychoneurometric approach; Yancey et al., ), highlighting ways in which this approach might be refined in future iterations. We conclude that there is much to be learned from this technique; however, greater attention to scale-development methods and to psychometrics will likely benefit this and other methodological approaches to combining measurements across multiple units of analysis. © 2016 Society for Psychophysiological Research.

The reliability analysis of a separated, dual fail operational redundant strapdown IMU. [inertial measurement unit

NASA Technical Reports Server (NTRS)

Motyka, P.

1983-01-01

A methodology for quantitatively analyzing the reliability of redundant avionics systems, in general, and the dual, separated Redundant Strapdown Inertial Measurement Unit (RSDIMU), in particular, is presented. The RSDIMU is described and a candidate failure detection and isolation system presented. A Markov reliability model is employed. The operational states of the system are defined and the single-step state transition diagrams discussed. Graphical results, showing the impact of major system parameters on the reliability of the RSDIMU system, are presented and discussed.

Seismic margin assessment of the Edwin I. Hatch Nuclear Plant, Unit 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barr, W.T.; Moore, D.P.; Smith, J.E.

1991-06-01

This summary presents the results and lessons learned from the seismic margin assessment (SMA) of Unit 1 of the Hatch Nuclear Plant. The primary purpose of this SMA was to assess the practicality of the EPRI SMA methodology on a BWR on a soil site such as Hatch. The major findings from the Hatch SMA are briefly described along with the lessons learned during the project implementation. The experience gained on the Hatch SMA is expected to benefit others in the performance of future SMAs. 12 refs.

Performance analysis of complex repairable industrial systems using PSO and fuzzy confidence interval based methodology.

PubMed

Garg, Harish

2013-03-01

The main objective of the present paper is to propose a methodology for analyzing the behavior of the complex repairable industrial systems. In real-life situations, it is difficult to find the most optimal design policies for MTBF (mean time between failures), MTTR (mean time to repair) and related costs by utilizing available resources and uncertain data. For this, the availability-cost optimization model has been constructed for determining the optimal design parameters for improving the system design efficiency. The uncertainties in the data related to each component of the system are estimated with the help of fuzzy and statistical methodology in the form of the triangular fuzzy numbers. Using these data, the various reliability parameters, which affects the system performance, are obtained in the form of the fuzzy membership function by the proposed confidence interval based fuzzy Lambda-Tau (CIBFLT) methodology. The computed results by CIBFLT are compared with the existing fuzzy Lambda-Tau methodology. Sensitivity analysis on the system MTBF has also been addressed. The methodology has been illustrated through a case study of washing unit, the main part of the paper industry. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

Spatial vulnerability units - expert-based spatial modelling of socio-economic vulnerability in the Salzach catchment, Austria

NASA Astrophysics Data System (ADS)

Kienberger, S.; Lang, S.; Zeil, P.

2009-05-01

The assessment of vulnerability has moved to centre-stage of the debate between different scientific disciplines related to climate change and disaster risk management. Composed by a combination of social, economical, physical and environmental factors the assessment implies combining different domains as well as quantitative with qualitative data and makes it therefore a challenge to identify an integrated metric for vulnerability. In this paper we define vulnerability in the context of climate change, targeting the hazard "flood". The developed methodology is being tested in the Salzach river catchment in Austria, which is largely prone to floods. The proposed methodology allows the spatial quantification of vulnerability and the identification of vulnerability units. These units build upon the geon concept which acts as a framework for the regionalization of continuous spatial information according to defined parameters of homogeneity. Using geons, we are capable of transforming singular domains of information on specific systemic components to policy-relevant, conditioned information. Considering the fact that vulnerability is not directly measurable and due to its complex dimension and social construction an expert-based approach has been chosen. Established methodologies such as Multicriteria Decision Analysis, Delphi exercises and regionalization approaches are being integrated. The method not only enables the assessment of vulnerability independent from administrative boundaries, but also applies an aggregation mode which reflects homogenous vulnerability units. This supports decision makers to reflect on complex issues such as vulnerability. Next to that, the advantage is to decompose the units to their underlying domains. Feedback from disaster management experts indicates that the approach helps to improve the design of measures aimed at strengthening preparedness and mitigation. From this point of view, we reach a step closer towards validation of the proposed method, comprising critical user-oriented aspects like adequateness, practicability and usability of the provided results in general.

United States Metric Board. A Study of Metric Measurement and Legislation. Volume 1.

DTIC Science & Technology

1979-09-10

LEGAL ADVISORY PANEL A. Panel Membership VIII.I B. Role of the Panel VIII.2 IX. DATA COLLECTION METHODOLOGY A. Basic Research IX.I B. Computer...First, the Panel was involved in a review of the overall study design . Second, the Panel reviewed the various change mechanisms which were identified...collection methodology . • X summarizes the relevant experiences of Canada and Australia. MIOOLEBNX *NEARC CRNTE 1.3 II. THE UNITED STATES METRIC

Information System Design Methodology Based on PERT/CPM Networking and Optimization Techniques.

ERIC Educational Resources Information Center

Bose, Anindya

The dissertation attempts to demonstrate that the program evaluation and review technique (PERT)/Critical Path Method (CPM) or some modified version thereof can be developed into an information system design methodology. The methodology utilizes PERT/CPM which isolates the basic functional units of a system and sets them in a dynamic time/cost…

Appropriate Methodology in ELT. A Report on the Dunford House Seminar (England, United Kingdom, July 14-24, 1986).

ERIC Educational Resources Information Center

Webber, Richard, Ed.; Deyes, Tony, Ed.

Proceedings of a seminar on instructional methodology in training programs for English-as-a-Second-Language teachers are presented in the form of papers, presentations, case study reports, and summary narrative. They include: "Debate on Appropriate Methodology" (Roger Bowers, Henry Widdowson); "Report Back on 1985 Case Study"…

TESTING TREE-CLASSIFIER VARIANTS AND ALTERNATE MODELING METHODOLOGIES IN THE EAST GREAT BASIN MAPPING UNIT OF THE SOUTHWEST REGIONAL GAP ANALYSIS PROJECT (SW REGAP)

EPA Science Inventory

We tested two methods for dataset generation and model construction, and three tree-classifier variants to identify the most parsimonious and thematically accurate mapping methodology for the SW ReGAP project. Competing methodologies were tested in the East Great Basin mapping un...

[Methodologies for Ascertaining Local Education Needs and for Allocating and Developing Resources.

ERIC Educational Resources Information Center

Bellott, Fred

A survey of 125 school systems in the United States was conducted to investigate methodologies used for developing needs assessment programs at a local level. Schools were asked to reply to a questionnaire which attempted to detail and identify how needs assessment programs are set up, what methodologies are employed, the number of resultant…

Performance evaluation of contrast-detail in full field digital mammography systems using ideal (Hotelling) observer vs. conventional automated analysis of CDMAM images for quality control of contrast-detail characteristics.

PubMed

Delakis, Ioannis; Wise, Robert; Morris, Lauren; Kulama, Eugenia

2015-11-01

The purpose of this work was to evaluate the contrast-detail performance of full field digital mammography (FFDM) systems using ideal (Hotelling) observer Signal-to-Noise Ratio (SNR) methodology and ascertain whether it can be considered an alternative to the conventional, automated analysis of CDMAM phantom images. Five FFDM units currently used in the national breast screening programme were evaluated, which differed with respect to age, detector, Automatic Exposure Control (AEC) and target/filter combination. Contrast-detail performance was analysed using CDMAM and ideal observer SNR methodology. The ideal observer SNR was calculated for input signal originating from gold discs of varying thicknesses and diameters, and then used to estimate the threshold gold thickness for each diameter as per CDMAM analysis. The variability of both methods and the dependence of CDMAM analysis on phantom manufacturing discrepancies also investigated. Results from both CDMAM and ideal observer methodologies were informative differentiators of FFDM systems' contrast-detail performance, displaying comparable patterns with respect to the FFDM systems' type and age. CDMAM results suggested higher threshold gold thickness values compared with the ideal observer methodology, especially for small-diameter details, which can be attributed to the behaviour of the CDMAM phantom used in this study. In addition, ideal observer methodology results showed lower variability than CDMAM results. The Ideal observer SNR methodology can provide a useful metric of the FFDM systems' contrast detail characteristics and could be considered a surrogate for conventional, automated analysis of CDMAM images. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Development of Bioethics and Clinical Ethics in Bulgaria.

PubMed

Aleksandrova-Yankulovska, Silviya S

2017-03-01

Bioethics and clinical ethics emerged from the classical medical ethics in the 1970s of the 20th century. Both fields are new for the Bulgarian academic tradition. The aims of this paper were to demarcate the subject fields of medical ethics, bioethics, and clinical ethics, to present the developments in the field of medical ethics in Bulgaria, to delineate the obstacles to effective ethics education of medical professionals, and to present the results of the application of an adapted bottom-up methodology for clinical ethics consultation in several clinical units in Bulgaria. Extended literature review and application of an adapted METAP methodology for clinical ethics consultation in six clinical units in the Northern Bulgaria between May 2013 and December 2014. Teaching of medical ethics in Bulgaria was introduced in the 1990s and still stands mainly as theoretical expertise without sufficient dilemma training in clinical settings. Earlier studies revealed need of clinical ethics consultation services in our country. METAP methodology was applied in 69 ethics meetings. In 31.9% of them non-medical considerations affected the choice of treatment and 34.8% resulted in reaching consensus between the team and the patient. Participants' opinion about the meetings was highly positive with 87.7% overall satisfaction. Development of bioethics in Bulgaria follows recent worldwide trends. Several ideas could be applied towards increasing the effectiveness of ethics education. Results of the ethics meetings lead to the conclusion that it is a successful and well accepted approach for clinical ethics consultation with a potential for wider introduction in our medical practice.

THEMATIC ACCURACY OF THE 1992 NATIONAL LAND-COVER DATA (NLCD) FOR THE EASTERN UNITED STATES: STATISTICAL METHODOLOGY AND REGIONAL RESULTS

EPA Science Inventory

The accuracy of the National Land Cover Data (NLCD) map is assessed via a probability sampling design incorporating three levels of stratification and two stages of selection. Agreement between the map and reference land-cover labels is defined as a match between the primary or a...

76 FR 67793 - Notification of Expanded Pricing Grid for Precious Metals Products Containing Platinum and Gold...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... DEPARTMENT OF THE TREASURY United States Mint Notification of Expanded Pricing Grid for Precious... in the Federal Register on January 6, 2009, outlining the new pricing methodology for numismatic... considerably, and is approaching the upper bracket of the pricing grid. As a result, it is necessary to expand...

Developing a Pedagogy for Teaching Self-Study Research: Lessons Learned across the Atlantic

ERIC Educational Resources Information Center

Lunenberg, Mieke; Samaras, Anastasia P.

2011-01-01

This article reports on a collective self-study from our multiple and unique experiences of teaching self-study research in the Netherlands and the United States. Through the methodology of dialog, we merged what we learned from our individual studies which resulted in six guidelines for a pedagogy for teaching self-study research. Without…

Training of Vocational Education Teachers in Research Methodology and Research Report Writing.

ERIC Educational Resources Information Center

Beaumariage, G. N., Jr.

A 45-hour three-unit course in research design, data collection techniques, and research report writing was prepared and taught to vocational/technology instructors. The course emphasized the relationship of design and data to the final reports in terms of techniques used. As a result of teaching the course, a second syllabus was developed…

A Normative Study of Children's Drawings: Preliminary Research Findings

ERIC Educational Resources Information Center

Deaver, Sarah P.

2009-01-01

This paper describes methodology, data analysis, and initial results of a research study with the long-term goal of establishing contemporary normative data on drawings from children living in the United States. The pool of participants was composed of 316 fourth graders (mean age 9.69 years) and 151 second graders (mean age 7.56 years) who each…

Catalog of Continuing Legal Education Programs in the United States. CLE Catalog 10, Spring & Summer 1970.

ERIC Educational Resources Information Center

Joint Committee on Continuing Legal Education, Philadelphia, PA.

This nationwide continuing legal education (CLE) directory for spring and summer 1970 contains scheduled and planned programs, publications, and audiovisual aids, together with information about the results (attendance, fees, methodology, and so on) of courses actually presented from July 1 to December 31, 1969. (Entries from Catalog 9 are not…

MEGASTAR: The meaning of growth. An assessment of systems, technologies, and requirements. [methodology for display and analysis of energy production and consumption

NASA Technical Reports Server (NTRS)

1974-01-01

A methodology for the display and analysis of postulated energy futures for the United States is presented. A systems approach methodology including the methodology of technology assessment is used to examine three energy scenarios--the Westinghouse Nuclear Electric Economy, the Ford Technical Fix Base Case and a MEGASTAR generated Alternate to the Ford Technical Fix Base Case. The three scenarios represent different paths of energy consumption from the present to the year 2000. Associated with these paths are various mixes of fuels, conversion, distribution, conservation and end-use technologies. MEGASTAR presents the estimated times and unit requirements to supply the fuels, conversion and distribution systems for the postulated end uses for the three scenarios and then estimates the aggregate manpower, materials, and capital requirements needed to develop the energy system described by the particular scenario.

Methodological Considerations for Research With Black Male Victims of Violent Injury in an Urban Trauma Unit.

PubMed

St Vil, Christopher; Richardson, Joseph; Cooper, Carnell

2018-04-01

There is a body of research over the last three decades that has focused on the etiology of violence among victims of violent injury. This body of literature indicates that Black men are disproportionately represented among victims of violent injury seen in emergency departments and trauma centers across the country. Despite the disproportionate number of low-income young Black men treated for violent injury in urban trauma units and the growing body of literature accompanying it, little is known about the unique methodological challenges violent injury researchers face when conducting research on this vulnerable population in a clinical setting. This article describes the unique and often nuanced methodological difficulties a research team encountered while conducting a longitudinal qualitative study on risk factors for repeat violent injury among low-income young Black male victims of violent injury treated at a Level II trauma center in the Eastern United States. Four methodological challenges are identified: (a) the identification and screening of participants, (b) recruitment and interviewing, (c) understanding hospital culture, policies, and procedures, and (d) retention and attrition of sample. Recommendations to overcome these challenges are offered.

Critical care medicine beds, use, occupancy and costs in the United States: a methodological review

PubMed Central

Halpern, Neil A; Pastores, Stephen M.

2017-01-01

This article is a methodological review to help the intensivist gain insights into the classic and sometimes arcane maze of national databases and methodologies used to determine and analyze the intensive care unit (ICU) bed supply, occupancy rates, and costs in the United States (US). Data for total ICU beds, use and occupancy can be derived from two large national healthcare databases: the Healthcare Cost Report Information System (HCRIS) maintained by the federal Centers for Medicare and Medicaid Services (CMS) and the proprietary Hospital Statistics of the American Hospital Association (AHA). Two costing methodologies can be used to calculate ICU costs: the Russell equation and national projections. Both methods are based on cost and use data from the national hospital datasets or from defined groups of hospitals or patients. At the national level, an understanding of US ICU beds, use and cost helps provide clarity to the width and scope of the critical care medicine (CCM) enterprise within the US healthcare system. This review will also help the intensivist better understand published studies on administrative topics related to CCM and be better prepared to participate in their own local hospital organizations or regional CCM programs. PMID:26308432

Determining the Performance of Fluorescence Molecular Imaging Devices using Traceable Working Standards with SI Units of Radiance

PubMed Central

Zhu, Banghe; Rasmussen, John C.; Litorja, Maritoni

2017-01-01

To date, no emerging preclinical or clinical near-infrared fluorescence (NIRF) imaging devices for non-invasive and/or surgical guidance have their performances validated on working standards with SI units of radiance that enable comparison or quantitative quality assurance. In this work, we developed and deployed a methodology to calibrate a stable, solid phantom for emission radiance with units of mW · sr−1 · cm−2 for use in characterizing the measurement sensitivity of ICCD and IsCMOS detection, signal-to-noise ratio, and contrast. In addition, at calibrated radiances, we assess transverse and lateral resolution of ICCD and IsCMOS camera systems. The methodology allowed determination of superior SNR of the ICCD over the IsCMOS camera system and superior resolution of the IsCMOS over the ICCD camera system. Contrast depended upon the camera settings (binning and integration time) and gain of intensifier. Finally, because of architecture of CMOS and CCD camera systems resulting in vastly different performance, we comment on the utility of these systems for small animal imaging as well as clinical applications for non-invasive and surgical guidance. PMID:26552078

Monitoring Urban Heat Island Through Google Earth Engine: Potentialities and Difficulties in Different Cities of the United States

NASA Astrophysics Data System (ADS)

Ravanelli, R.; Nascetti, A.; Cirigliano, R. V.; Di Rico, C.; Monti, P.; Crespi, M.

2018-04-01

The aim of this work is to exploit the large-scale analysis capabilities of the innovative Google Earth Engine platform in order to investigate the temporal variations of the Urban Heat Island phenomenon as a whole. A intuitive methodology implementing a largescale correlation analysis between the Land Surface Temperature and Land Cover alterations was thus developed.The results obtained for the Phoenix MA are promising and show how the urbanization heavily affects the magnitude of the UHI effects with significant increases in LST. The proposed methodology is therefore able to efficiently monitor the UHI phenomenon.

Combining qualitative and quantitative research within mixed method research designs: a methodological review.

PubMed

Östlund, Ulrika; Kidd, Lisa; Wengström, Yvonne; Rowa-Dewar, Neneh

2011-03-01

It has been argued that mixed methods research can be useful in nursing and health science because of the complexity of the phenomena studied. However, the integration of qualitative and quantitative approaches continues to be one of much debate and there is a need for a rigorous framework for designing and interpreting mixed methods research. This paper explores the analytical approaches (i.e. parallel, concurrent or sequential) used in mixed methods studies within healthcare and exemplifies the use of triangulation as a methodological metaphor for drawing inferences from qualitative and quantitative findings originating from such analyses. This review of the literature used systematic principles in searching CINAHL, Medline and PsycINFO for healthcare research studies which employed a mixed methods approach and were published in the English language between January 1999 and September 2009. In total, 168 studies were included in the results. Most studies originated in the United States of America (USA), the United Kingdom (UK) and Canada. The analytic approach most widely used was parallel data analysis. A number of studies used sequential data analysis; far fewer studies employed concurrent data analysis. Very few of these studies clearly articulated the purpose for using a mixed methods design. The use of the methodological metaphor of triangulation on convergent, complementary, and divergent results from mixed methods studies is exemplified and an example of developing theory from such data is provided. A trend for conducting parallel data analysis on quantitative and qualitative data in mixed methods healthcare research has been identified in the studies included in this review. Using triangulation as a methodological metaphor can facilitate the integration of qualitative and quantitative findings, help researchers to clarify their theoretical propositions and the basis of their results. This can offer a better understanding of the links between theory and empirical findings, challenge theoretical assumptions and develop new theory. Copyright © 2010 Elsevier Ltd. All rights reserved.

Cognitive Behavior Therapy for Schizophrenia: Effect Sizes, Clinical Models, and Methodological Rigor

PubMed Central

Wykes, Til; Steel, Craig; Everitt, Brian; Tarrier, Nicholas

2008-01-01

Background: Guidance in the United States and United Kingdom has included cognitive behavior therapy for psychosis (CBTp) as a preferred therapy. But recent advances have widened the CBTp targets to other symptoms and have different methods of provision, eg, in groups. Aim: To explore the effect sizes of current CBTp trials including targeted and nontargeted symptoms, modes of action, and effect of methodological rigor. Method: Thirty-four CBTp trials with data in the public domain were used as source data for a meta-analysis and investigation of the effects of trial methodology using the Clinical Trial Assessment Measure (CTAM). Results: There were overall beneficial effects for the target symptom (33 studies; effect size = 0.400 [95% confidence interval {CI} = 0.252, 0.548]) as well as significant effects for positive symptoms (32 studies), negative symptoms (23 studies), functioning (15 studies), mood (13 studies), and social anxiety (2 studies) with effects ranging from 0.35 to 0.44. However, there was no effect on hopelessness. Improvements in one domain were correlated with improvements in others. Trials in which raters were aware of group allocation had an inflated effect size of approximately 50%–100%. But rigorous CBTp studies showed benefit (estimated effect size = 0.223; 95% CI = 0.017, 0.428) although the lower end of the CI should be noted. Secondary outcomes (eg, negative symptoms) were also affected such that in the group of methodologically adequate studies the effect sizes were not significant. Conclusions: As in other meta-analyses, CBTp had beneficial effect on positive symptoms. However, psychological treatment trials that make no attempt to mask the group allocation are likely to have inflated effect sizes. Evidence considered for psychological treatment guidance should take into account specific methodological detail. PMID:17962231

Designing Web 2.0 Based Constructivist-Oriented E-Learning Units

ERIC Educational Resources Information Center

Chai, Ching Sing; Woo, Huay Lit; Wang, Qiyun

2010-01-01

Purpose: The main purpose of this paper is to present how meaningful e-learning units can be created by using an online tool called Meaningful E-learning Units (MeLU). The paper also aims to describe how created e-learning units can be shared by teachers and students. Design/methodology/approach: This tool can help to produce e-learning units that…

Terrestrial Ecosystems - Land Surface Forms of the Conterminous United States

USGS Publications Warehouse

Cress, Jill J.; Sayre, Roger G.; Comer, Patrick; Warner, Harumi

2009-01-01

As part of an effort to map terrestrial ecosystems, the U.S. Geological Survey has generated land surface form classes to be used in creating maps depicting standardized, terrestrial ecosystem models for the conterminous United States, using an ecosystems classification developed by NatureServe . A biophysical stratification approach, developed for South America and now being implemented globally, was used to model the ecosystem distributions. Since land surface forms strongly influence the differentiation and distribution of terrestrial ecosystems, they are one of the key input layers in this biophysical stratification. After extensive investigation into various land surface form mapping methodologies, the decision was made to use the methodology developed by the Missouri Resource Assessment Partnership (MoRAP). MoRAP made modifications to Hammond's land surface form classification, which allowed the use of 30-meter source data and a 1-km2 window for analyzing the data cell and its surrounding cells (neighborhood analysis). While Hammond's methodology was based on three topographic variables, slope, local relief, and profile type, MoRAP's methodology uses only slope and local relief. Using the MoRAP method, slope is classified as gently sloping when more than 50 percent of the area in a 1-km2 neighborhood has slope less than 8 percent, otherwise the area is considered moderately sloping. Local relief, which is the difference between the maximum and minimum elevation in a neighborhood, is classified into five groups: 0-15 m, 16-30 m, 31-90 m, 91-150 m, and >150 m. The land surface form classes are derived by combining slope and local relief to create eight landform classes: flat plains (gently sloping and local relief = 90 m), low hills (not gently sloping and local relief = 150 m). However, in the USGS application of the MoRAP methodology, an additional local relief group was used (> 400 m) to capture additional local topographic variation. As a result, low mountains were redefined as not gently sloping and 151 m 400 m. The final application of the MoRAP methodology was implemented using the USGS 30-meter National Elevation Dataset and an existing USGS slope dataset that had been derived by calculating the slope from the NED in Universal Transverse Mercator (UTM) coordinates in each UTM zone, and then combining all of the zones into a national dataset. This map shows a smoothed image of the nine land surface form classes based on MoRAP's methodology. Additional information about this map and any data developed for the ecosystems modeling of the conterminous United States is available online at http://rmgsc.cr.usgs.gov/ecosystems/.

An AIS-based approach to calculate atmospheric emissions from the UK fishing fleet

NASA Astrophysics Data System (ADS)

Coello, Jonathan; Williams, Ian; Hudson, Dominic A.; Kemp, Simon

2015-08-01

The fishing industry is heavily reliant on the use of fossil fuel and emits large quantities of greenhouse gases and other atmospheric pollutants. Methods used to calculate fishing vessel emissions inventories have traditionally utilised estimates of fuel efficiency per unit of catch. These methods have weaknesses because they do not easily allow temporal and geographical allocation of emissions. A large proportion of fishing and other small commercial vessels are also omitted from global shipping emissions inventories such as the International Maritime Organisation's Greenhouse Gas Studies. This paper demonstrates an activity-based methodology for the production of temporally- and spatially-resolved emissions inventories using data produced by Automatic Identification Systems (AIS). The methodology addresses the issue of how to use AIS data for fleets where not all vessels use AIS technology and how to assign engine load when vessels are towing trawling or dredging gear. The results of this are compared to a fuel-based methodology using publicly available European Commission fisheries data on fuel efficiency and annual catch. The results show relatively good agreement between the two methodologies, with an estimate of 295.7 kilotons of fuel used and 914.4 kilotons of carbon dioxide emitted between May 2012 and May 2013 using the activity-based methodology. Different methods of calculating speed using AIS data are also compared. The results indicate that using the speed data contained directly in the AIS data is preferable to calculating speed from the distance and time interval between consecutive AIS data points.

Analytical Utility of Campylobacter Methodologies

USDA-ARS?s Scientific Manuscript database

The National Advisory Committee on Microbiological Criteria for Foods (NACMCF, or the Committee) was asked to address the analytical utility of Campylobacter methodologies in preparation for an upcoming United States Food Safety and Inspection Service (FSIS) baseline study to enumerate Campylobacter...

NPS Transit System Passenger Boardings Study: Converting Ticket Sales to Passenger Boardings.

DOT National Transportation Integrated Search

2016-01-01

This report examines the reporting of passenger boardings (unlinked passenger trips) by NPS transit systems that use a ticket sales conversion methodology. By studying and validating the park units' passenger boarding methodology from converting tick...

Assessment of Methodological Quality of Economic Evaluations in Belgian Drug Reimbursement Applications

PubMed Central

Simoens, Steven

2013-01-01

Objectives This paper aims to assess the methodological quality of economic evaluations included in Belgian reimbursement applications for Class 1 drugs. Materials and Methods For 19 reimbursement applications submitted during 2011 and Spring 2012, a descriptive analysis assessed the methodological quality of the economic evaluation, evaluated the assessment of that economic evaluation by the Drug Reimbursement Committee and the response to that assessment by the company. Compliance with methodological guidelines issued by the Belgian Healthcare Knowledge Centre was assessed using a detailed checklist of 23 methodological items. The rate of compliance was calculated based on the number of economic evaluations for which the item was applicable. Results Economic evaluations tended to comply with guidelines regarding perspective, target population, subgroup analyses, comparator, use of comparative clinical data and final outcome measures, calculation of costs, incremental analysis, discounting and time horizon. However, more attention needs to be paid to the description of limitations of indirect comparisons, the choice of an appropriate analytic technique, the expression of unit costs in values for the current year, the estimation and valuation of outcomes, the presentation of results of sensitivity analyses, and testing the face validity of model inputs and outputs. Also, a large variation was observed in the scope and depth of the quality assessment by the Drug Reimbursement Committee. Conclusions Although general guidelines exist, pharmaceutical companies and the Drug Reimbursement Committee would benefit from the existence of a more detailed checklist of methodological items that need to be reported in an economic evaluation. PMID:24386474

Evaluating environmental impact caused by industrial activities - Implementation of the WTP-WTA approach

NASA Astrophysics Data System (ADS)

Kopsidas, Odysseas; Batzias, Fragiskos

2012-12-01

In this work, a methodological framework under the form of an algorithmic procedure, including 28 activity stages and 6 decision nodes, has been developed for evaluating environmental impact caused by industrial activities. The main part of this procedure is a modification of the Contingent Valuation Method (CVM), which is heavily relied on survey-based estimation of WTP-WTA (willingness to pay/accept, respectively). The survey may take place either under a strictly controlled environment or in situ and as-is ('laboratory conditions' or 'field conditions', respectively, in the terminology of experimental economics). Implementation of this methodology is presented, referring to three cases of industrial pollution (in three different sites) caused by (i) a cement producing units, (ii) an oil refinery complex, and (iii) an industrialized small city with an intensively polluted port, where several industrial units co-exist, all of them located in the vicinity of Athens, Greece. The results are interpreted/discussed and conclusions are drawn.

Life cycle assessment integrated with thermodynamic analysis of bio-fuel options for solid oxide fuel cells.

PubMed

Lin, Jiefeng; Babbitt, Callie W; Trabold, Thomas A

2013-01-01

A methodology that integrates life cycle assessment (LCA) with thermodynamic analysis is developed and applied to evaluate the environmental impacts of producing biofuels from waste biomass, including biodiesel from waste cooking oil, ethanol from corn stover, and compressed natural gas from municipal solid wastes. Solid oxide fuel cell-based auxiliary power units using bio-fuel as the hydrogen precursor enable generation of auxiliary electricity for idling heavy-duty trucks. Thermodynamic analysis is applied to evaluate the fuel conversion efficiency and determine the amount of fuel feedstock needed to generate a unit of electrical power. These inputs feed into an LCA that compares energy consumption and greenhouse gas emissions of different fuel pathways. Results show that compressed natural gas from municipal solid wastes is an optimal bio-fuel option for SOFC-APU applications in New York State. However, this methodology can be regionalized within the U.S. or internationally to account for different fuel feedstock options. Copyright © 2012 Elsevier Ltd. All rights reserved.

Effectiveness of haloperidol prophylaxis in critically ill patients with a high risk of delirium: a systematic review.

PubMed

Santos, Eduardo; Cardoso, Daniela; Neves, Hugo; Cunha, Madalena; Rodrigues, Manuel; Apóstolo, João

2017-05-01

Delirium is associated with increased intensive care unit and hospital length of stay, prolonged duration of mechanical ventilation, unplanned removal of tubes and catheters, and increased morbidity and mortality. Prophylactic treatment with low-dose haloperidol may have beneficial effects for critically ill patients with a high risk of delirium. To identify the effectiveness of haloperidol prophylaxis in critically ill patients with a high risk for delirium. Patients with a predicted high risk of delirium, aged 18 years or over, and in intensive care units. Patients with a history of concurrent antipsychotic medication use were excluded. Haloperidol prophylaxis for preventing delirium. Experimental and epidemiological study designs. Primary outcome is the incidence of delirium. Secondary outcomes are duration of mechanical ventilation, incidence of re-intubation, incidence of unplanned/accidental removal of tubes/lines and catheters, intensive care unit and hospital length of stay, and re-admissions to both settings. An initial search of MEDLINE and CINAHL was undertaken, followed by a second search for published and unpublished studies from January 1967 to September 2015 in major healthcare-related electronic databases. Studies in English, Spanish and Portuguese were included. Two independent reviewers assessed the methodological quality of five studies using the standardized critical appraisal instrument from the Joanna Briggs Institute Meta-Analysis of Statistics Assessment and Review Instrument. There was general agreement among the reviewers to exclude one relevant study due to methodological quality. Data were extracted using the JBI data extraction form for experimental studies and included details about the interventions, populations, study methods and outcomes of significance to the review questions. Significant differences were found between participants, interventions, outcome measures (clinical heterogeneity) and designs (methodological heterogeneity). For these reasons, we were unable to perform a meta-analysis. Therefore, the results have been described in a narrative format. Five studies met the inclusion criteria. One of these studies was excluded due to poor methodological quality. The remaining four original studies (total of 1142 patients) were included in this review. Three studies were randomized controlled trials and one was a cohort study.Two studies confirmed the effectiveness of haloperidol prophylaxis in critically ill patients with a high risk of delirium. These studies showed that short-term prophylactic administration of low-dose intravenous haloperidol significantly decreased the incidence of delirium in elderly patients admitted to intensive care units after non-cardiac surgery and in general intensive care unit patients with a high risk of delirium.However, the two remaining studies showed contradictory results in mechanically ventilated critically ill adults, revealing that the administration of haloperidol reduced delirium prevalence, delayed its occurrence, and/or shorten its duration. The evidence related to the effectiveness of haloperidol prophylaxis in critically ill patients with a high risk of delirium is contradictory. However, balancing the benefits and low side effects associated with haloperidol prophylaxis, this preventive intervention may be useful to reduce the incidence of delirium in critically ill adults in intensive care units.

Geostatistical approach for assessing soil volumes requiring remediation: validation using lead-polluted soils underlying a former smelting works.

PubMed

Demougeot-Renard, Helene; De Fouquet, Chantal

2004-10-01

Assessing the volume of soil requiring remediation and the accuracy of this assessment constitutes an essential step in polluted site management. If this remediation volume is not properly assessed, misclassification may lead both to environmental risks (polluted soils may not be remediated) and financial risks (unexpected discovery of polluted soils may generate additional remediation costs). To minimize such risks, this paper proposes a geostatistical methodology based on stochastic simulations that allows the remediation volume and the uncertainty to be assessed using investigation data. The methodology thoroughly reproduces the conditions in which the soils are classified and extracted at the remediation stage. The validity of the approach is tested by applying it on the data collected during the investigation phase of a former lead smelting works and by comparing the results with the volume that has actually been remediated. This real remediated volume was composed of all the remediation units that were classified as polluted after systematic sampling and analysis during clean-up stage. The volume estimated from the 75 samples collected during site investigation slightly overestimates (5.3% relative error) the remediated volume deduced from 212 remediation units. Furthermore, the real volume falls within the range of uncertainty predicted using the proposed methodology.

Improvement of Steam Turbine Operational Performance and Reliability with using Modern Information Technologies

NASA Astrophysics Data System (ADS)

Brezgin, V. I.; Brodov, Yu M.; Kultishev, A. Yu

2017-11-01

The report presents improvement methods review in the fields of the steam turbine units design and operation based on modern information technologies application. In accordance with the life cycle methodology support, a conceptual model of the information support system during life cycle main stages (LC) of steam turbine unit is suggested. A classifying system, which ensures the creation of sustainable information links between the engineer team (manufacture’s plant) and customer organizations (power plants), is proposed. Within report, the principle of parameterization expansion beyond the geometric constructions at the design and improvement process of steam turbine unit equipment is proposed, studied and justified. The report presents the steam turbine unit equipment design methodology based on the brand new oil-cooler design system that have been developed and implemented by authors. This design system combines the construction subsystem, which is characterized by extensive usage of family tables and templates, and computation subsystem, which includes a methodology for the thermal-hydraulic zone-by-zone oil coolers design calculations. The report presents data about the developed software for operational monitoring, assessment of equipment parameters features as well as its implementation on five power plants.

It is Time the United States Air Force Changes the way it Feeds its Airmen

DTIC Science & Technology

2008-03-01

narrative , phenomenology , ethnography , case study , and grounded theory . In purpose, these strategies are...methodology) the research will be analyzed. Methodology A qualitative research methodology and specifically a case study strategy for the...well as theory building in chapter five . Finally, in regards to reliability, Yin’s (2003) case study protocol guidance was used as a means to

Qualification Procedures for VHSIC/VLSI

DTIC Science & Technology

1990-12-01

alternative approach for qualification of complex microcircuits. To address the technical issues related to a process oriented qualification approach, the...methodology of microcircuit process control to promote the United States to a position of supplying the nighest quality and most reliable...available resources . o Coordinate document reviews with weekly and monthly status reviews on progress. o Summarize results and collate into four basic

Residual Strength Characterization of Unitized Structures Fabricated Using Different Manufacturing Technologies

NASA Technical Reports Server (NTRS)

Seshadri, B. R.; Smith, S. W.; Johnston, W. M.

2008-01-01

This viewgraph presentation describes residual strength analysis of integral structures fabricated using different manufacturing procedures. The topics include: 1) Built-up and Integral Structures; 2) Development of Prediction Methodology for Integral Structures Fabricated using different Manufacturing Procedures; 3) Testing Facility; 4) Fracture Parameters Definition; 5) Crack Branching in Integral Structures; 6) Results and Discussion; and 7) Concluding Remarks.

Proceedings of the second international symposium on fire economics, planning, and policy: a global view

Treesearch

Armando González-Cabán

2008-01-01

hese proceedings summarize the results of a symposium designed to address current issues of agencies with wildland fire protection responsibility at the federal and state levels in the United States as well as agencies in the international community. The topics discussed at the symposium included fire economics, theoretical and methodological approaches to strategic...

Development of CAG Model for Developing Instructional Materials for Teaching Physical Science Concepts for Grade 8 Students.

ERIC Educational Resources Information Center

Hse, Shun-Yi

1991-01-01

The development of an instructional model based on a learning cycle including correlation, analysis, and generalization (CAG) is described. A module developed for heat and temperature was administered to test its effects by comparing its use with the same unit in the New Physical Science Curriculum (NPSC). The methodology, results, and discussion…

Emerging Demands for Public Policies in Rio De Janeiro: Educational Prevention of Social Risks

ERIC Educational Resources Information Center

Gomes Da Silva, Magda Maria Ventura; Garcia, Maria del Pilar Quicios

2016-01-01

This paper disseminates some results of an international research on the social risk manifestations published in eight periodicals in Rio de Janeiro from July 2013 to December 2014. A sample of the research coincides with the population: 541 news, which constitutes 1255 analytical units. The methodology consisted of a content analysis of the news,…

Analysis of torque transmitting behavior and wheel slip prevention control during regenerative braking for high speed EMU trains

NASA Astrophysics Data System (ADS)

Xu, Kun; Xu, Guo-Qing; Zheng, Chun-Hua

2016-04-01

The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability, improving the adhesion utilization, and achieving deep energy recovery. There remain technical challenges mainly because of the nonlinear, uncertain, and varying features of wheel-rail contact conditions. This research analyzes the torque transmitting behavior during regenerative braking, and proposes a novel methodology to detect the wheel-rail adhesion stability. Then, applications to the wheel slip prevention during braking are investigated, and the optimal slip ratio control scheme is proposed, which is based on a novel optimal reference generation of the slip ratio and a robust sliding mode control. The proposed methodology achieves the optimal braking performance without the wheel-rail contact information. Numerical simulation results for uncertain slippery rails verify the effectiveness of the proposed methodology.

Development of a Probabilistic Assessment Methodology for Evaluation of Carbon Dioxide Storage

USGS Publications Warehouse

Burruss, Robert A.; Brennan, Sean T.; Freeman, P.A.; Merrill, Matthew D.; Ruppert, Leslie F.; Becker, Mark F.; Herkelrath, William N.; Kharaka, Yousif K.; Neuzil, Christopher E.; Swanson, Sharon M.; Cook, Troy A.; Klett, Timothy R.; Nelson, Philip H.; Schenk, Christopher J.

2009-01-01

This report describes a probabilistic assessment methodology developed by the U.S. Geological Survey (USGS) for evaluation of the resource potential for storage of carbon dioxide (CO2) in the subsurface of the United States as authorized by the Energy Independence and Security Act (Public Law 110-140, 2007). The methodology is based on USGS assessment methodologies for oil and gas resources created and refined over the last 30 years. The resource that is evaluated is the volume of pore space in the subsurface in the depth range of 3,000 to 13,000 feet that can be described within a geologically defined storage assessment unit consisting of a storage formation and an enclosing seal formation. Storage assessment units are divided into physical traps (PTs), which in most cases are oil and gas reservoirs, and the surrounding saline formation (SF), which encompasses the remainder of the storage formation. The storage resource is determined separately for these two types of storage. Monte Carlo simulation methods are used to calculate a distribution of the potential storage size for individual PTs and the SF. To estimate the aggregate storage resource of all PTs, a second Monte Carlo simulation step is used to sample the size and number of PTs. The probability of successful storage for individual PTs or the entire SF, defined in this methodology by the likelihood that the amount of CO2 stored will be greater than a prescribed minimum, is based on an estimate of the probability of containment using present-day geologic knowledge. The report concludes with a brief discussion of needed research data that could be used to refine assessment methodologies for CO2 sequestration.

Ballast water regulations and the move toward concentration-based numeric discharge limits.

PubMed

Albert, Ryan J; Lishman, John M; Saxena, Juhi R

2013-03-01

Ballast water from shipping is a principal source for the introduction of nonindigenous species. As a result, numerous government bodies have adopted various ballast water management practices and discharge standards to slow or eliminate the future introduction and dispersal of these nonindigenous species. For researchers studying ballast water issues, understanding the regulatory framework is helpful to define the scope of research needed by policy makers to develop effective regulations. However, for most scientists, this information is difficult to obtain because it is outside the standard scientific literature and often difficult to interpret. This paper provides a brief review of the regulatory framework directed toward scientists studying ballast water and aquatic invasive species issues. We describe different approaches to ballast water management in international, U.S. federal and state, and domestic ballast water regulation. Specifically, we discuss standards established by the International Maritime Organization (IMO), the U.S. Coast Guard and U.S. Environmental Protection Agency, and individual states in the United States including California, New York, and Minnesota. Additionally, outside the United States, countries such as Australia, Canada, and New Zealand have well-established domestic ballast water regulatory regimes. Different approaches to regulation have recently resulted in variations between numeric concentration-based ballast water discharge limits, particularly in the United States, as well as reliance on use of ballast water exchange pending development and adoption of rigorous science-based discharge standards. To date, numeric concentration-based discharge limits have not generally been based upon a thorough application of risk-assessment methodologies. Regulators, making decisions based on the available information and methodologies before them, have consequently established varying standards, or not established standards at all. The review and refinement of ballast water discharge standards by regulatory agencies will benefit from activity by the scientific community to improve and develop more precise risk-assessment methodologies.

Topology optimization and laser additive manufacturing in design process of efficiency lightweight aerospace parts

NASA Astrophysics Data System (ADS)

Fetisov, K. V.; Maksimov, P. V.

2018-05-01

The paper presents the application of topology optimization and laser additive manufacturing in the design of lightweight aerospace parts. At the beginning a brief overview of the topology optimization algorithm SIMP is given, one of the most commonly used algorithm in FEA software. After that, methodology of parts design with using topology optimization is discussed as well as issues related to designing for additive manufacturing. In conclusion, the practical application of the proposed methodologies is presented using the example of one complex assembly unit. As a result of the new design approach, the mass of product was reduced five times, and twenty parts were replaced by one.

76 FR 59896 - Wage Methodology for the Temporary Non-Agricultural Employment H-2B Program; Postponement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... Wage Rule revised the methodology by which we calculate the prevailing wages to be paid to H-2B workers... methodology by which we calculate the prevailing wages to be paid to H-2B workers and United States (U.S... concerning the calculation of the prevailing wage rate in the H-2B program. CATA v. Solis, Dkt. No. 103-1...

Use of Bayesian Methods to Analyze and Visualize Content Uniformity Capability Versus United States Pharmacopeia and ASTM Standards.

PubMed

Hofer, Jeffrey D; Rauk, Adam P

2017-02-01

The purpose of this work was to develop a straightforward and robust approach to analyze and summarize the ability of content uniformity data to meet different criteria. A robust Bayesian statistical analysis methodology is presented which provides a concise and easily interpretable visual summary of the content uniformity analysis results. The visualization displays individual batch analysis results and shows whether there is high confidence that different content uniformity criteria could be met a high percentage of the time in the future. The 3 tests assessed are as follows: (a) United States Pharmacopeia Uniformity of Dosage Units <905>, (b) a specific ASTM E2810 Sampling Plan 1 criterion to potentially be used for routine release testing, and (c) another specific ASTM E2810 Sampling Plan 2 criterion to potentially be used for process validation. The approach shown here could readily be used to create similar result summaries for other potential criteria. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Military Participants at U.S. Atmospheric Nuclear Weapons Testing— Methodology for Estimating Dose and Uncertainty

PubMed Central

Till, John E.; Beck, Harold L.; Aanenson, Jill W.; Grogan, Helen A.; Mohler, H. Justin; Mohler, S. Shawn; Voillequé, Paul G.

2014-01-01

Methods were developed to calculate individual estimates of exposure and dose with associated uncertainties for a sub-cohort (1,857) of 115,329 military veterans who participated in at least one of seven series of atmospheric nuclear weapons tests or the TRINITY shot carried out by the United States. The tests were conducted at the Pacific Proving Grounds and the Nevada Test Site. Dose estimates to specific organs will be used in an epidemiological study to investigate leukemia and male breast cancer. Previous doses had been estimated for the purpose of compensation and were generally high-sided to favor the veteran's claim for compensation in accordance with public law. Recent efforts by the U.S. Department of Defense (DOD) to digitize the historical records supporting the veterans’ compensation assessments make it possible to calculate doses and associated uncertainties. Our approach builds upon available film badge dosimetry and other measurement data recorded at the time of the tests and incorporates detailed scenarios of exposure for each veteran based on personal, unit, and other available historical records. Film badge results were available for approximately 25% of the individuals, and these results assisted greatly in reconstructing doses to unbadged persons and in developing distributions of dose among military units. This article presents the methodology developed to estimate doses for selected cancer cases and a 1% random sample of the total cohort of veterans under study. PMID:24758578

Geologic framework for the national assessment of carbon dioxide storage resources: Columbia Basin of Oregon, Washington, and Idaho, and the Western Oregon-Washington basins: Chapter D in Geologic framework for the national assessment of carbon dioxide storage resources

USGS Publications Warehouse

Covault, Jacob A.; Blondes, Madalyn S.; Cahan, Steven M.; DeVera, Christina A.; Freeman, P.A.; Lohr, Celeste D.; Warwick, Peter D.; Corum, Margo D.

2013-01-01

The 2007 Energy Independence and Security Act (Public Law 110–140) directs the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO2). The methodology used by the USGS for the national CO2 assessment follows that of previous USGS work. The methodology is non-economic and intended to be used at regional to subbasinal scales. This report identifies and contains geologic descriptions of three storage assessment units (SAUs) in Eocene and Oligocene sedimentary rocks within the Columbia, Puget, Willapa, Astoria, Nehalem, and Willamette Basins of Oregon, Washington, and Idaho, and focuses on the characteristics, specified in the methodology, that influence the potential CO2 storage resource in those SAUs. Specific descriptions of the SAU boundaries as well as their sealing and reservoir units are included. Properties for each SAU, such as depth to top, gross thickness, porosity, permeability, groundwater quality, and structural reservoir traps, are provided to illustrate geologic factors critical to the assessment. The designated sealing unit in the Columbia Basin is tentatively chosen to be the ubiquitous and thick Miocene Columbia River Basalt Group. As a result of uncertainties regarding the seal integrity of the Columbia River Basalt Group, the SAUs were not quantitatively assessed. Figures in this report show SAU boundaries and cell maps of well penetrations through sealing units into the top of the storage formations. The cell maps show the number of penetrating wells within one square mile and are derived from interpretations of incompletely attributed well data, a digital compilation that is known not to include all drilling. The USGS does not expect to know the location of all wells and cannot guarantee the amount of drilling through specific formations in any given cell shown on the cell maps.

1995 National assessment of United States oil and gas resources; results, methodology, and supporting data

USGS Publications Warehouse

Gautier, Donald L.; Dolton, G.L.; Takahashi, K.I.; Varnes, K.L.

1995-01-01

This report summarizes the results of a 3-year study of the oil and gas resources of the onshore and state waters of the United States by the U.S. Geological Survey. A parallel study of the Federal offshore is being conducted by the Minerals Management Service. Estimates are made of technically recoverable oil, including measured (proved) reserves, future additions to reserves in existing fields, and undiscovered resources. Estimates are also made of the technically recoverable conventional resources of natural gas in measured reserves, in anticipated growth of reserves in existing fields, and in undiscovered resources. Additionally, an assessment is made of recoverable resources in continuous-type (largely unconventional) accumulations in sandstones, shales, chalks, and coal beds.

Institutions and national development in Latin America: a comparative study

PubMed Central

Portes, Alejandro; Smith, Lori D.

2013-01-01

We review the theoretical and empirical literatures on the role of institutions on national development as a prelude to present a more rigorous and measurable definition of the concept and a methodology to study this relationship at the national and subnational levels. The existing research literature features conflicting definitions of the concept of “institutions” and empirical tests based mostly on reputational indices, with countries as units of analysis. The present study’s methodology is based on a set of five strategic organizations studied comparatively in five Latin American countries. These include key federal agencies, public administrative organizations, and stock exchanges. Systematic analysis of results show a pattern of differences between economically-oriented institutions and those entrusted with providing basic services to the general population. Consistent differences in institutional quality also emerge across countries, despite similar levels of economic development. Using the algebraic methods developed by Ragin, we test six hypotheses about factors determining the developmental character of particular institutions. Implications of results for theory and for methodological practices of future studies in this field are discussed. PMID:26543407

Effect of Methodological and Ecological Approaches on Heterogeneity of Nest-Site Selection of a Long-Lived Vulture

PubMed Central

Moreno-Opo, Rubén; Fernández-Olalla, Mariana; Margalida, Antoni; Arredondo, Ángel; Guil, Francisco

2012-01-01

The application of scientific-based conservation measures requires that sampling methodologies in studies modelling similar ecological aspects produce comparable results making easier their interpretation. We aimed to show how the choice of different methodological and ecological approaches can affect conclusions in nest-site selection studies along different Palearctic meta-populations of an indicator species. First, a multivariate analysis of the variables affecting nest-site selection in a breeding colony of cinereous vulture (Aegypius monachus) in central Spain was performed. Then, a meta-analysis was applied to establish how methodological and habitat-type factors determine differences and similarities in the results obtained by previous studies that have modelled the forest breeding habitat of the species. Our results revealed patterns in nesting-habitat modelling by the cinereous vulture throughout its whole range: steep and south-facing slopes, great cover of large trees and distance to human activities were generally selected. The ratio and situation of the studied plots (nests/random), the use of plots vs. polygons as sampling units and the number of years of data set determined the variability explained by the model. Moreover, a greater size of the breeding colony implied that ecological and geomorphological variables at landscape level were more influential. Additionally, human activities affected in greater proportion to colonies situated in Mediterranean forests. For the first time, a meta-analysis regarding the factors determining nest-site selection heterogeneity for a single species at broad scale was achieved. It is essential to homogenize and coordinate experimental design in modelling the selection of species' ecological requirements in order to avoid that differences in results among studies would be due to methodological heterogeneity. This would optimize best conservation and management practices for habitats and species in a global context. PMID:22413023

Use of geographic information systems in rabies vaccination campaigns.

PubMed

Grisi-Filho, José Henrique de Hildebrand e; Amaku, Marcos; Dias, Ricardo Augusto; Montenegro Netto, Hildebrando; Paranhos, Noemia Tucunduva; Mendes, Maria Cristina Novo Campos; Ferreira Neto, José Soares; Ferreira, Fernando

2008-12-01

To develop a method to assist in the design and assessment of animal rabies control campaigns. A methodology was developed based on geographic information systems to estimate the animal (canine and feline) population and density per census tract and per subregion (known as "Subprefeituras") in the city of São Paulo (Southeastern Brazil) in 2002. The number of vaccination units in a given region was estimated to achieve a certain proportion of vaccination coverage. Census database was used for the human population, as well as estimates ratios of dog:inhabitant and cat:inhabitant. Estimated figures were 1,490,500 dogs and 226,954 cats in the city, i.e. an animal population density of 1138.14 owned animals per km(2). In the 2002 campaign, 926,462 were vaccinated, resulting in a vaccination coverage of 54%. The estimated number of vaccination units to be able to reach a 70%-vaccination coverage, by vaccinating 700 animals per unit on average, was 1,729. These estimates are presented as maps of animal density according to census tracts and "Subprefeituras". The methodology used in the study may be applied in a systematic way to the design and evaluation of rabies vaccination campaigns, enabling the identification of areas of critical vaccination coverage.

Estimation of regional building-related C&D debris generation and composition: case study for Florida, US.

PubMed

Cochran, Kimberly; Townsend, Timothy; Reinhart, Debra; Heck, Howell

2007-01-01

Methodology for the accounting, generation, and composition of building-related construction and demolition (C&D) at a regional level was explored. Six specific categories of debris were examined: residential construction, nonresidential construction, residential demolition, nonresidential demolition, residential renovation, and nonresidential renovation. Debris produced from each activity was calculated as the product of the total area of activity and waste generated per unit area of activity. Similarly, composition was estimated as the product of the total area of activity and the amount of each waste component generated per unit area. The area of activity was calculated using statistical data, and individual site studies were used to assess the average amount of waste generated per unit area. The application of the methodology was illustrated using Florida, US approximately 3,750,000 metric tons of building-related C&D debris were estimated as generated in Florida in 2000. Of that amount, concrete represented 56%, wood 13%, drywall 11%, miscellaneous debris 8%, asphalt roofing materials 7%, metal 3%, cardboard 1%, and plastic 1%. This model differs from others because it accommodates regional construction styles and available data. The resulting generation amount per capita is less than the US estimate - attributable to the high construction, low demolition activity seen in Florida.

Transition from an open-plan to a two-cot neonatal intensive care unit: a participatory action research approach.

PubMed

Broom, Margaret; Gardner, Anne; Kecskes, Zsuzsoka; Kildea, Sue

2017-07-01

To facilitate staff transition from an open-plan to a two-cot neonatal intensive care unit design. In 2012, an Australian regional neonatal intensive care unit transitioned from an open-plan to a two-cot neonatal intensive care unit design. Research has reported single- and small-room neonatal intensive care unit design may negatively impact on the distances nurses walk, reducing the time they spend providing direct neonatal care. Studies have also reported nurses feel isolated and need additional support and education in such neonatal intensive care units. Staff highlighted their concerns regarding the impact of the new design on workflow and clinical practice. A participatory action research approach. A participatory action group titled the Change and Networking Group collaborated with staff over a four-year period (2009-2013) to facilitate the transition. The Change and Networking Group used a collaborative, cyclical process of planning, gathering data, taking action and reviewing the results to plan the next action. Data sources included meeting and workshop minutes, newsletters, feedback boards, subgroup reports and a staff satisfaction survey. The study findings include a description of (1) how the participatory action research cycles were used by the Change and Networking Group: providing examples of projects and strategies undertaken; and (2) evaluations of participatory action research methodology and Group by neonatal intensive care unit staff and Change and Networking members. This study has described the benefits of using participatory action research to facilitate staff transition from an open-plan to a two-cot neonatal intensive care unit design. Participatory action research methodology enabled the inclusion of staff to find solutions to design and clinical practice questions. Future research is required to assess the long-term effect of neonatal intensive care unit design on staff workload, maintaining and supporting a skilled workforce as well as the impact of a new neonatal intensive care unit design on the neonatal intensive care unit culture. A supportive work environment for staff is critical in providing high-quality health care. © 2016 John Wiley & Sons Ltd.

Unlocking the Barriers to Women and Minorities in Computer Science and Information Systems Studies: Results from a Multi-Methodological Study Conducted at Two Minority Serving Institutions

ERIC Educational Resources Information Center

Buzzetto-More, Nicole; Ukoha, Ojiabo; Rustagi, Narendra

2010-01-01

The under representation of women and minorities in undergraduate computer science and information systems programs is a pervasive and persistent problem in the United States. Needed is a better understanding of the background and psychosocial factors that attract, or repel, minority students from computing disciplines. An examination of these…

Meta-Analytic Methodology and Inferences about the Efficacy of Formative Assessment

ERIC Educational Resources Information Center

Briggs, Derek C.; Ruiz-Primo, Maria Araceli; Furtak, Erin; Shepard, Lorrie; Yin, Yue

2012-01-01

In a recent article published in "EM:IP," Kingston and Nash report on the results of a meta-analysis on the efficacy of formative assessment. They conclude that the average effect of formative assessment on student achievement is about 0.20 SD units. This would seem to dispel the myth that effects between 0.40 and 0.70 can be attributed to…

United States Air Force Annual Financial Statements

DTIC Science & Technology

2002-01-01

the Naval Postgraduate School and AFIT. While specific rec- ommendations are still in process, better cooperation, exchange of professors, and a common ...address schedule, technical, pro- grammatic, and performance risk; (3) the impact of capabilities-based requirements on system trade-off decisions; and (4...methodology to consider the impact of “aging” aircraft on the funding requirements . The model resulted in the identification and correct

Studies in Ambulatory Care Quality Assessment in the Indian Health Service. Volume III: Comparison of Rural Private Practice, Health Maintenance Organizations, and the Indian Health Service.

ERIC Educational Resources Information Center

Nutting, Paul A.; And Others

Utilizing a quality assessment methodology for ambulatory patient care currently under development by the Indian Health Service's (IHS) Office of Research and Development, comparisons were made between results derived from a pilot test in IHS service units, 2 metropolitan Health Maintenance Organizations (HMO), and 3 rural private practices.…

A POLLUTION REDUCTION METHODOLOGY FOR CHEMICAL PROCESS SIMULATORS

EPA Science Inventory

A pollution minimization methodology was developed for chemical process design using computer simulation. It is based on a pollution balance that at steady state is used to define a pollution index with units of mass of pollution per mass of products. The pollution balance has be...

Visual unit analysis: a descriptive approach to landscape assessment

Treesearch

R. J. Tetlow; S. R. J. Sheppard

1979-01-01

Analysis of the visible attributes of landscapes is an important component of the planning process. When landscapes are at regional scale, economical and effective methodologies are critical. The Visual Unit concept appears to offer a logical and useful framework for description and evaluation. The concept subdivides landscape into coherent, spatially-defined units....

Of Tilting Earths, Ruler Swans, and Fighting Mosquitoes: First Graders Writing Nonfiction

ERIC Educational Resources Information Center

Wilson, Melissa I.

2012-01-01

Using discourse analysis methodology, this dissertation describes the literacy practices of first grade students as they engaged in researching, writing and illustrating nonfiction. The research focused on two instructional units on writing nonfiction that included a poster unit and a research report unit. The data consisted of 27 days of video…

Flow unit modeling and fine-scale predicted permeability validation in Atokan sandstones: Norcan East Kansas

USGS Publications Warehouse

Bhattacharya, S.; Byrnes, A.P.; Watney, W.L.; Doveton, J.H.

2008-01-01

Characterizing the reservoir interval into flow units is an effective way to subdivide the net-pay zone into layers for reservoir simulation. Commonly used flow unit identification techniques require a reliable estimate of permeability in the net pay on a foot-by-foot basis. Most of the wells do not have cores, and the literature is replete with different kinds of correlations, transforms, and prediction methods for profiling permeability in pay. However, for robust flow unit determination, predicted permeability at noncored wells requires validation and, if necessary, refinement. This study outlines the use o f a spreadsheet-based permeability validation technique to characterize flow units in wells from the Norcan East field, Clark County, Kansas, that produce from Atokan aged fine- to very fine-grained quartzarenite sandstones interpreted to have been deposited in brackish-water, tidally dominated restricted tidal-flat, tidal-channel, tidal-bar, and estuary bay environments within a small incised-valley-fill system. The methodology outlined enables the identification of fieldwide free-water level and validates and refines predicted permeability at 0.5-ft (0.15-m) intervals by iteratively reconciling differences in water saturation calculated from wire-line log and a capillary-pressure formulation that models fine- to very fine-grained sandstone with diagenetic clay and silt or shale laminae. The effectiveness of this methodology was confirmed by successfully matching primary and secondary production histories using a flow unit-based reservoir model of the Norcan East field without permeability modifications. The methodologies discussed should prove useful for robust flow unit characterization of different kinds of reservoirs. Copyright ?? 2008. The American Association of Petroleum Geologists. All rights reserved.

Doctoral Training in Statistics, Measurement, and Methodology in Psychology: Replication and Extension of Aiken, West, Sechrest, and Reno's (1990) Survey of PhD Programs in North America

ERIC Educational Resources Information Center

Aiken, Leona S.; West, Stephen G.; Millsap, Roger E.

2008-01-01

In a survey of all PhD programs in psychology in the United States and Canada, the authors documented the quantitative methodology curriculum (statistics, measurement, and research design) to examine the extent to which innovations in quantitative methodology have diffused into the training of PhDs in psychology. In all, 201 psychology PhD…

Meta-Generalis: A Novel Method for Structuring Information from Radiology Reports

PubMed Central

Barbosa, Flavio; Traina, Agma Jucci

2016-01-01

Summary Background A structured report for imaging exams aims at increasing the precision in information retrieval and communication between physicians. However, it is more concise than free text and may limit specialists’ descriptions of important findings not covered by pre-defined structures. A computational ontological structure derived from free texts designed by specialists may be a solution for this problem. Therefore, the goal of our study was to develop a methodology for structuring information in radiology reports covering specifications required for the Brazilian Portuguese language, including the terminology to be used. Methods We gathered 1,701 radiological reports of magnetic resonance imaging (MRI) studies of the lumbosacral spine from three different institutions. Techniques of text mining and ontological conceptualization of lexical units extracted were used to structure information. Ten radiologists, specialists in lumbosacral MRI, evaluated the textual superstructure and terminology extracted using an electronic questionnaire. Results The established methodology consists of six steps: 1) collection of radiology reports of a specific MRI examination; 2) textual decomposition; 3) normalization of lexical units; 4) identification of textual superstructures; 5) conceptualization of candidate-terms; and 6) evaluation of superstructures and extracted terminology by experts using an electronic questionnaire. Three different textual superstructures were identified, with terminological variations in the names of their textual categories. The number of candidate-terms conceptualized was 4,183, yielding 727 concepts. There were a total of 13,963 relationships between candidate-terms and concepts and 789 relationships among concepts. Conclusions The proposed methodology allowed structuring information in a more intuitive and practical way. Indications of three textual superstructures, extraction of lexicon units and the normalization and ontologically conceptualization were achieved while maintaining references to their respective categories and free text radiology reports. PMID:27580980

Geologic framework for the national assessment of carbon dioxide storage resources: Hanna, Laramie, and Shirley Basins, Wyoming: Chapter C in Geologic framework for the national assessment of carbon dioxide storage resources

USGS Publications Warehouse

Merrill, Matthew D.; Covault, Jacob A.; Craddock, William H.; Slucher, Ernie R.; Warwick, Peter D.; Blondes, Madalyn S.; Gosai, Mayur A.; Freeman, P.A.; Cahan, Steven M.; Lohr, Celeste D.; Warwick, Peter D.; Corum, Margo D.

2012-01-01

The 2007 Energy Independence and Security Act (Public Law 110-140) directs the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO2). The methodology used for the national CO2 assessment is non-economic and intended to be used at regional to subbasinal scales. This report identifies and contains geologic descriptions of twelve storage assessment units (SAUs) in six separate packages of sedimentary rock within the Hanna, Laramie, and Shirley Basins of Wyoming. It focuses on the particular characteristics, specified in the methodology, that influence the potential CO2 storage resource in those SAUs. Specific descriptions of SAU boundaries as well as their sealing and reservoir units are included. Properties for each SAU, such as depth to top, gross thickness, net porous thickness, porosity, permeability, groundwater quality, and structural reservoir traps are provided to illustrate geologic factors critical to the assessment. Although assessment results are not contained in this report, the geologic information included herein will be employed, as specified in the methodology, to calculate a statistical Monte Carlo-based distribution of potential storage space in the various SAUs. Figures in this report show SAU boundaries and cell maps of well penetrations through the sealing unit into the top of the storage formation. Cell maps show the number of penetrating wells within one square mile and are derived from interpretations of incompletely attributed well data in a digital compilation that is known not to include all drilling. The USGS does not expect to know the location of all wells and cannot guarantee the amount of drilling through specific formations in any given cell shown on cell maps.

Clinical and cost outcomes of multifactorial, cardiovascular risk management interventions in worksites: a comprehensive review and analysis.

PubMed

Pelletier, K R

1997-12-01

This paper is a critical review of the clinical and cost outcome evaluation studies of multifactorial, comprehensive, cardiovascular risk management programs in worksites. A comprehensive international literature search conducted under the auspices of the National Heart, Lung and Blood Institute identified 17 articles based on 12 studies that examined the clinical outcomes of multifactorial, comprehensive programs. These articles were identified through MEDLINE, manual searches of recent journals, and through direct inquiries to worksite health promotion researchers. All studies were conducted between 1978 and 1995, with 1978 being the date of the first citation of a methodologically rigorous evaluation. Of the 12 research studies, only 8 utilized the worksite as both the unit of assignment and as the unit of analysis. None of the studies analyzed adequately for cost effectiveness. Given this limitation, this review briefly considers the relevant worksite research that has demonstrated cost outcomes. Worksite-based, multifactorial cardiovascular intervention programs reviewed for this article varied widely in the comprehensiveness, intensity, and duration of both the interventions and evaluations. Results from randomized trials suggest that providing opportunities for individualized, cardiovascular risk reduction counseling for high-risk employees within the context of comprehensive programming may be the critical component of an effective worksite intervention. Despite the many limitations of the current methodologies of the 12 studies, the majority of the research to date indicates the following: (1) favorable clinical and cost outcomes; (2) that more recent and more rigorously designed research tends to support rather than refute earlier and less rigorously designed studies; and (3) that rather than interpreting the methodological flaws and diversity as inherently negative, one may consider it as indicative of a robust phenomena evident in many types of worksites, with diverse employees, differing interventions, and varying degrees of methodological sophistication. Results of these studies reviewed provide both cautious optimism about the effectiveness of these worksite programs and insights regarding the essential components and characteristics of successful programs.

The public health benefits of insulation retrofits in existing housing in the United States

PubMed Central

Levy, Jonathan I; Nishioka, Yurika; Spengler, John D

2003-01-01

Background Methodological limitations make it difficult to quantify the public health benefits of energy efficiency programs. To address this issue, we developed a risk-based model to estimate the health benefits associated with marginal energy usage reductions and applied the model to a hypothetical case study of insulation retrofits in single-family homes in the United States. Methods We modeled energy savings with a regression model that extrapolated findings from an energy simulation program. Reductions of fine particulate matter (PM2.5) emissions and particle precursors (SO2 and NOx) were quantified using fuel-specific emission factors and marginal electricity analyses. Estimates of population exposure per unit emissions, varying by location and source type, were extrapolated from past dispersion model runs. Concentration-response functions for morbidity and mortality from PM2.5 were derived from the epidemiological literature, and economic values were assigned to health outcomes based on willingness to pay studies. Results In total, the insulation retrofits would save 800 TBTU (8 × 1014 British Thermal Units) per year across 46 million homes, resulting in 3,100 fewer tons of PM2.5, 100,000 fewer tons of NOx, and 190,000 fewer tons of SO2 per year. These emission reductions are associated with outcomes including 240 fewer deaths, 6,500 fewer asthma attacks, and 110,000 fewer restricted activity days per year. At a state level, the health benefits per unit energy savings vary by an order of magnitude, illustrating that multiple factors (including population patterns and energy sources) influence health benefit estimates. The health benefits correspond to $1.3 billion per year in externalities averted, compared with $5.9 billion per year in economic savings. Conclusion In spite of significant uncertainties related to the interpretation of PM2.5 health effects and other dimensions of the model, our analysis demonstrates that a risk-based methodology is viable for national-level energy efficiency programs. PMID:12740041

Methodology for assessing quantities of water and proppant injection, and water production associated with development of continuous petroleum accumulations

USGS Publications Warehouse

Haines, Seth S.

2015-07-13

The quantities of water and hydraulic fracturing proppant required for producing petroleum (oil, gas, and natural gas liquids) from continuous accumulations, and the quantities of water extracted during petroleum production, can be quantitatively assessed using a probabilistic approach. The water and proppant assessment methodology builds on the U.S. Geological Survey methodology for quantitative assessment of undiscovered technically recoverable petroleum resources in continuous accumulations. The U.S. Geological Survey assessment methodology for continuous petroleum accumulations includes fundamental concepts such as geologically defined assessment units, and probabilistic input values including well-drainage area, sweet- and non-sweet-spot areas, and success ratio within the untested area of each assessment unit. In addition to petroleum-related information, required inputs for the water and proppant assessment methodology include probabilistic estimates of per-well water usage for drilling, cementing, and hydraulic-fracture stimulation; the ratio of proppant to water for hydraulic fracturing; the percentage of hydraulic fracturing water that returns to the surface as flowback; and the ratio of produced water to petroleum over the productive life of each well. Water and proppant assessments combine information from recent or current petroleum assessments with water- and proppant-related input values for the assessment unit being studied, using Monte Carlo simulation, to yield probabilistic estimates of the volume of water for drilling, cementing, and hydraulic fracture stimulation; the quantity of proppant for hydraulic fracture stimulation; and the volumes of water produced as flowback shortly after well completion, and produced over the life of the well.

Geologic framework for the national assessment of carbon dioxide storage resources: Arkoma Basin, Kansas Basins, and Midcontinent Rift Basin study areas: Chapter F in Geologic framework for the national assessment of carbon dioxide storage resources

USGS Publications Warehouse

Buursink, Marc L.; Craddock, William H.; Blondes, Madalyn S.; Freeman, Phillip A.; Cahan, Steven M.; DeVera, Christina A.; Lohr, Celeste D.

2013-01-01

2007 Energy Independence and Security Act (Public Law 110–140) directs the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO2). The methodology used by the USGS for the national CO2 assessment follows that of previous USGS work. This methodology is non-economic and intended to be used at regional to subbasinal scales. This report identifies and contains geologic descriptions of three storage assessment units (SAUs) in Upper Cambrian to Mississippian sedimentary rocks within the Arkoma Basin study area, and two SAUs in Upper Cambrian to Mississippian sedimentary rocks within the Kansas Basins study area. The Arkoma Basin and Kansas Basins are adjacent with very similar geologic units; although the Kansas Basins area is larger, the Arkoma Basin is more structurally complex. The report focuses on the characteristics, specified in the methodology, that influence the potential CO2 storage resource in the SAUs. Specific descriptions of the SAU boundaries as well as their sealing and reservoir units are included. Properties for each SAU, such as depth to top, gross thickness, porosity, permeability, groundwater quality, and structural reservoir traps, are usually provided to illustrate geologic factors critical to the assessment. Although assessment results are not contained in this report, the geologic information herein was employed, as specified in the USGS methodology, to calculate a probabilistic distribution of potential storage resources in each SAU. The Midcontinent Rift Basin study area was not assessed, because no suitable storage formations meeting our size, depth, reservoir quality, and regional seal guidelines were found. Figures in this report show study area boundaries along with the SAU boundaries and cell maps of well penetrations through sealing units into the top of the storage formations. The cell maps show the number of penetrating wells within one-square mile and are derived from interpretations of incompletely attributed well data and from a digital compilation that is known not to include all drilling. The USGS does not expect to know the location of all wells and cannot guarantee the amount of drilling through specific formations in any given cell shown on the cell maps.

Nanoarchitectonics from Molecular Units to Living-Creature-Like Motifs.

PubMed

Ariga, Katsuhiko; Mori, Taizo; Shrestha, Lok Kumar

2017-12-04

Important points for the fabrication of functional materials are the creation of nanoscale/molecular-scale units and architecting them into functional materials and systems. Recently, a new conceptual paradigm, nanoarchitectonics, has been proposed to combine nanotechnology and other methodologies including supramolecular chemistry, self-assembly and self-organization to satisfy major features of nanoscience and promote the creation of functional materials and systems. In this account article, our recent research results in materials development based on the nanoarchitectonics concept are summarized in two stories, (i) nanoarchitectonics from fullerenes as the simplest nano-units and (ii) dimension-dependent nanoarchitectonics from various structural units. The former demonstrates creativity of the nanoarchitectonics concept only with simple construction stuffs on materials fabrications, and a wide range of material applicability for the nanoarchitectonics strategy is realized in the latter ones. © 2017 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Methodology for evaluating the insect growth regulator (IGR) methoprene incorporated into packaging films

USDA-ARS?s Scientific Manuscript database

The insect growth regulator methoprene has been impregnated onto various packaging materials to control stored product insects, and is labeled for use in this manner in the United States. Different methodologies were utilized to evaluate efficacy towards Tribolium castaneum (Herbst), the red flour b...

ASPEN Plus in the Chemical Engineering Curriculum: Suitable Course Content and Teaching Methodology

ERIC Educational Resources Information Center

Rockstraw, David A.

2005-01-01

An established methodology involving the sequential presentation of five skills on ASPEN Plus to undergraduate seniors majoring in ChE is presented in this document: (1) specifying unit operations; (2) manipulating physical properties; (3) accessing variables; (4) specifying nonstandard components; and (5) applying advanced features. This…

A Probabilistic Assessment Methodology for the Evaluation of Geologic Carbon Dioxide Storage

USGS Publications Warehouse

Brennan, Sean T.; Burruss, Robert A.; Merrill, Matthew D.; Freeman, P.A.; Ruppert, Leslie F.

2010-01-01

In 2007, the Energy Independence and Security Act (Public Law 110-140) authorized the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO2) in cooperation with the U.S. Environmental Protection Agency and the U.S. Department of Energy. The first year of that activity was specified for development of a methodology to estimate storage potential that could be applied uniformly to geologic formations across the United States. After its release, the methodology was to receive public comment and external expert review. An initial methodology was developed and published in March 2009 (Burruss and others, 2009), and public comments were received. The report was then sent to a panel of experts for external review. The external review report was received by the USGS in December 2009. This report is in response to those external comments and reviews and describes how the previous assessment methodology (Burruss and others, 2009) was revised. The resource that is assessed is the technically accessible storage resource, which is defined as the mass of CO2 that can be stored in the pore volume of a storage formation. The methodology that is presented in this report is intended to be used for assessments at scales ranging from regional to subbasinal in which storage assessment units are defined on the basis of common geologic and hydrologic characteristics. The methodology does not apply to site-specific evaluation of storage resources or capacity.

Molecular characterization of organic electronic films.

PubMed

DeLongchamp, Dean M; Kline, R Joseph; Fischer, Daniel A; Richter, Lee J; Toney, Michael F

2011-01-18

Organic electronics have emerged as a viable competitor to amorphous silicon for the active layer in low-cost electronics. The critical performance of organic electronic materials is closely related to their morphology and molecular packing. Unlike their inorganic counterparts, polymers combine complex repeat unit structure and crystalline disorder. This combination prevents any single technique from being able to uniquely solve the packing arrangement of the molecules. Here, a general methodology for combining multiple, complementary techniques that provide accurate unit cell dimensions and molecular orientation is described. The combination of measurements results in a nearly complete picture of the organic film morphology. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Independent Orbiter Assessment (IOA): Weibull analysis report

NASA Technical Reports Server (NTRS)

Raffaelli, Gary G.

1987-01-01

The Auxiliary Power Unit (APU) and Hydraulic Power Unit (HPU) Space Shuttle Subsystems were reviewed as candidates for demonstrating the Weibull analysis methodology. Three hardware components were identified as analysis candidates: the turbine wheel, the gearbox, and the gas generator. Detailed review of subsystem level wearout and failure history revealed the lack of actual component failure data. In addition, component wearout data were not readily available or would require a separate data accumulation effort by the vendor. Without adequate component history data being available, the Weibull analysis methodology application to the APU and HPU subsystem group was terminated.

Ceramic matrix composite behavior -- Computational simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chamis, C.C.; Murthy, P.L.N.; Mital, S.K.

Development of analytical modeling and computational capabilities for the prediction of high temperature ceramic matrix composite behavior has been an ongoing research activity at NASA-Lewis Research Center. These research activities have resulted in the development of micromechanics based methodologies to evaluate different aspects of ceramic matrix composite behavior. The basis of the approach is micromechanics together with a unique fiber substructuring concept. In this new concept the conventional unit cell (the smallest representative volume element of the composite) of micromechanics approach has been modified by substructuring the unit cell into several slices and developing the micromechanics based equations at themore » slice level. Main advantage of this technique is that it can provide a much greater detail in the response of composite behavior as compared to a conventional micromechanics based analysis and still maintains a very high computational efficiency. This methodology has recently been extended to model plain weave ceramic composites. The objective of the present paper is to describe the important features of the modeling and simulation and illustrate with select examples of laminated as well as woven composites.« less

Probabilistic population aging

PubMed Central

2017-01-01

We merge two methodologies, prospective measures of population aging and probabilistic population forecasts. We compare the speed of change and variability in forecasts of the old age dependency ratio and the prospective old age dependency ratio as well as the same comparison for the median age and the prospective median age. While conventional measures of population aging are computed on the basis of the number of years people have already lived, prospective measures are computed also taking account of the expected number of years they have left to live. Those remaining life expectancies change over time and differ from place to place. We compare the probabilistic distributions of the conventional and prospective measures using examples from China, Germany, Iran, and the United States. The changes over time and the variability of the prospective indicators are smaller than those that are observed in the conventional ones. A wide variety of new results emerge from the combination of methodologies. For example, for Germany, Iran, and the United States the likelihood that the prospective median age of the population in 2098 will be lower than it is today is close to 100 percent. PMID:28636675

Use of a turboexpander in steam power units for heat energy recovery in heat supply systems

NASA Astrophysics Data System (ADS)

Sadykov, R. A.; Daminov, A. Z.; Solomin, I. N.; Futin, V. A.

2016-05-01

A method for raising the efficiency of a boiler plant by installing a unit operating by the organic Rankine cycle is presented. Such units allow one to generate electricity to cover the auxiliaries of a heat source at a heat-transfer fluid temperature of no more than 130°C. The results of commissioning tests of boilers revealed that their efficiency is maximized under a load that is close or corresponds to the nominal one. If this load is maintained constantly, excess heat energy is produced. This excess may be used to generate electric energy in a steam power unit with a turboexpander. A way to insert this unit into the flow diagram of a boiler plant is proposed. The results of analysis of turbine types (turboexpanders included) with various capacities are presented, and the optimum type for the proposed flow diagram is chosen. The methodology for the design of turboexpanders and compressors used in the oil and gas industry and their operational data were applied in the analysis of a turboexpander. The results of the thermogasdynamic analysis of a turboexpander and the engineered shape of an axial-radial impeller are presented. Halocarbon R245fa is chosen as the working medium based on its calorimetric properties.

Methodological Choices in Muscle Synergy Analysis Impact Differentiation of Physiological Characteristics Following Stroke

PubMed Central

Banks, Caitlin L.; Pai, Mihir M.; McGuirk, Theresa E.; Fregly, Benjamin J.; Patten, Carolynn

2017-01-01

Muscle synergy analysis (MSA) is a mathematical technique that reduces the dimensionality of electromyographic (EMG) data. Used increasingly in biomechanics research, MSA requires methodological choices at each stage of the analysis. Differences in methodological steps affect the overall outcome, making it difficult to compare results across studies. We applied MSA to EMG data collected from individuals post-stroke identified as either responders (RES) or non-responders (nRES) on the basis of a critical post-treatment increase in walking speed. Importantly, no clinical or functional indicators identified differences between the cohort of RES and nRES at baseline. For this exploratory study, we selected the five highest RES and five lowest nRES available from a larger sample. Our goal was to assess how the methodological choices made before, during, and after MSA affect the ability to differentiate two groups with intrinsic physiologic differences based on MSA results. We investigated 30 variations in MSA methodology to determine which choices allowed differentiation of RES from nRES at baseline. Trial-to-trial variability in time-independent synergy vectors (SVs) and time-varying neural commands (NCs) were measured as a function of: (1) number of synergies computed; (2) EMG normalization method before MSA; (3) whether SVs were held constant across trials or allowed to vary during MSA; and (4) synergy analysis output normalization method after MSA. MSA methodology had a strong effect on our ability to differentiate RES from nRES at baseline. Across all 10 individuals and MSA variations, two synergies were needed to reach an average of 90% variance accounted for (VAF). Based on effect sizes, differences in SV and NC variability between groups were greatest using two synergies with SVs that varied from trial-to-trial. Differences in SV variability were clearest using unit magnitude per trial EMG normalization, while NC variability was less sensitive to EMG normalization method. No outcomes were greatly impacted by output normalization method. MSA variability for some, but not all, methods successfully differentiated intrinsic physiological differences inaccessible to traditional clinical or biomechanical assessments. Our results were sensitive to methodological choices, highlighting the need for disclosure of all aspects of MSA methodology in future studies. PMID:28912707

Methodological Choices in Muscle Synergy Analysis Impact Differentiation of Physiological Characteristics Following Stroke.

PubMed

Banks, Caitlin L; Pai, Mihir M; McGuirk, Theresa E; Fregly, Benjamin J; Patten, Carolynn

2017-01-01

Muscle synergy analysis (MSA) is a mathematical technique that reduces the dimensionality of electromyographic (EMG) data. Used increasingly in biomechanics research, MSA requires methodological choices at each stage of the analysis. Differences in methodological steps affect the overall outcome, making it difficult to compare results across studies. We applied MSA to EMG data collected from individuals post-stroke identified as either responders (RES) or non-responders (nRES) on the basis of a critical post-treatment increase in walking speed. Importantly, no clinical or functional indicators identified differences between the cohort of RES and nRES at baseline. For this exploratory study, we selected the five highest RES and five lowest nRES available from a larger sample. Our goal was to assess how the methodological choices made before, during, and after MSA affect the ability to differentiate two groups with intrinsic physiologic differences based on MSA results. We investigated 30 variations in MSA methodology to determine which choices allowed differentiation of RES from nRES at baseline. Trial-to-trial variability in time-independent synergy vectors (SVs) and time-varying neural commands (NCs) were measured as a function of: (1) number of synergies computed; (2) EMG normalization method before MSA; (3) whether SVs were held constant across trials or allowed to vary during MSA; and (4) synergy analysis output normalization method after MSA. MSA methodology had a strong effect on our ability to differentiate RES from nRES at baseline. Across all 10 individuals and MSA variations, two synergies were needed to reach an average of 90% variance accounted for (VAF). Based on effect sizes, differences in SV and NC variability between groups were greatest using two synergies with SVs that varied from trial-to-trial. Differences in SV variability were clearest using unit magnitude per trial EMG normalization, while NC variability was less sensitive to EMG normalization method. No outcomes were greatly impacted by output normalization method. MSA variability for some, but not all, methods successfully differentiated intrinsic physiological differences inaccessible to traditional clinical or biomechanical assessments. Our results were sensitive to methodological choices, highlighting the need for disclosure of all aspects of MSA methodology in future studies.

Micromechanics Fatigue Damage Analysis Modeling for Fabric Reinforced Ceramic Matrix Composites

NASA Technical Reports Server (NTRS)

Min, J. B.; Xue, D.; Shi, Y.

2013-01-01

A micromechanics analysis modeling method was developed to analyze the damage progression and fatigue failure of fabric reinforced composite structures, especially for the brittle ceramic matrix material composites. A repeating unit cell concept of fabric reinforced composites was used to represent the global composite structure. The thermal and mechanical properties of the repeating unit cell were considered as the same as those of the global composite structure. The three-phase micromechanics, the shear-lag, and the continuum fracture mechanics models were integrated with a statistical model in the repeating unit cell to predict the progressive damages and fatigue life of the composite structures. The global structure failure was defined as the loss of loading capability of the repeating unit cell, which depends on the stiffness reduction due to material slice failures and nonlinear material properties in the repeating unit cell. The present methodology is demonstrated with the analysis results evaluated through the experimental test performed with carbon fiber reinforced silicon carbide matrix plain weave composite specimens.

Evaluation of Feruloylated and p-Coumaroylated Arabinosyl Units in Grass Arabinoxylans by Acidolysis in Dioxane/Methanol.

PubMed

Lapierre, Catherine; Voxeur, Aline; Karlen, Steven D; Helm, Richard F; Ralph, John

2018-05-30

The arabinosyl side chains of grass arabinoxylans are partially acylated by p-coumarate ( pCA) and ferulate (FA). These aromatic side chains can cross-couple wall polymers resulting in modulation of cell wall physical properties. The determination of p-coumaroylated and feruloylated arabinose units has been the target of analytical efforts with trifluoroacetic acid hydrolysis the standard method to release feruloylated and p-coumaroylated arabinose units from arabinoxylans. Herein, we report on a more robust method to measure these acylated units. Acidolysis of extractive-free grass samples in a dioxane/methanol/aqueous 2 M HCl mixture provided the methyl 5- O- p-coumaroyl- and 5- O-feruloyl-l-arabinofuranoside anomers ( pCA-MeAra and FA-MeAra). These conjugates were readily analyzed by liquid chromatography combined with both UV and MS detection. The method revealed the variability of the relative acylation of arabinose units by pCA or FA in grass cell walls. This methodology will permit delineation of hydroxycinnamate acylation patterns in arabinoxylans.

The effects of arts-in-medicine programming on the medical-surgical work environment

PubMed Central

Sonke, Jill; Pesata, Virginia; Arce, Lauren; Carytsas, Ferol P.; Zemina, Kristen; Jokisch, Christine

2015-01-01

Background: Arts in medicine programs have significant impacts on patients and staff in long-term care environments, but the literature lacks evidence of effectiveness on hospital units with shorter average lengths of stay. Methods: The qualitative study used individual structured interviews to assess the impacts of arts programming on job satisfaction, stress, unit culture, support, quality of care, and patient outcomes on a short-term medical-surgical unit, and used a qualitative cross comparison grounded theory methodology to analyze data. Results: The study confirmed that arts programming can positively affect unit culture, nursing practice, and quality of care on short-stay medical-surgical units. Significant insights related to nursing practice and the art program were found, including that music can cause negative distraction for staff. Conclusions: While positive impacts of arts programming on the medical-surgical environment are clear, potential negative effects also need to be considered in the development of practice protocols for artists. PMID:25544861

Weaponizing the Final Frontier: The United States and the New Space Race

DTIC Science & Technology

2017-06-09

42 CHAPTER 3 RESEARCH METHODOLOGY ................................................................43 Documentary Analysis...Commission to Assess United States National Security Space Management and Organization, Executive Summary. The report concluded that to avoid a “Space Pearl...2010), 36. 10 Report of the Commission to Assess United States National Security Space Management and Organization pursuant to Public Law 106-65

Reliability Centered Maintenance - Methodologies

NASA Technical Reports Server (NTRS)

Kammerer, Catherine C.

2009-01-01

Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

Maternal mortality as a Millennium Development Goal of the United Nations: a systematic assessment and analysis of available data in threshold countries using Indonesia as example

PubMed Central

Reinke, Evelyn; Supriyatiningsih; Haier, Jörg

2017-01-01

Background In 2015 the proposed period ended for achieving the Millennium Development Goals (MDG) of the United Nations targeting to lower maternal mortality worldwide by ~ 75%. 99% of these cases appear in developing and threshold countries; but reports mostly rely on incomplete or unrepresentative data. Using Indonesia as example, currently available data sets for maternal mortality were systematically reviewed. Methods Besides analysis of international and national data resources, a systematic review was carried out according to Cochrane methodology to identify all data and assessments regarding maternal mortality. Results Overall, primary data on maternal mortality differed significantly and were hardly comparable. For 1990 results varied between 253/100 000 and 446/100 000. In 2013 data appeared more conclusive (140–199/100 000). An annual reduction rate (ARR) of –2.8% can be calculated. Conclusion Reported data quality of maternal mortality in Indonesia is very limited regarding comprehensive availability and methodology. This limitation appears to be of general importance for the targeted countries of the MDG. Primary data are rare, not uniformly obtained and not evaluated by comparable methods resulting in very limited comparability. Continuous small data set registration should have high priority for analysis of maternal health activities. PMID:28400953

A Unit on "Fahrenheit 451" That Uses Cooperative Learning (Resources and Reviews).

ERIC Educational Resources Information Center

Ebbers, Frances A.

1991-01-01

Provides a curriculum unit using the novel "Fahrenheit 451" to provide student-centered activities based on solid pedagogical methodology. Emphasizes value-centered analysis of the novel, comparison of alternative arguments, and integration of cooperative learning activities. (PRA)

Forecasting Maintenance Shortcomings of a Planned Equipment Density Listing in Support of Expeditionary Missions

DTIC Science & Technology

2017-06-01

importantly, it examines the methodology used to build the class IX block embarked on ship prior to deployment. The class IX block is defined as a repository...compared to historical data to evaluate model and simulation outputs. This thesis provides recommendations on improving the methodology implemented in...improving the level of organic support available to deployed units. More importantly, it examines the methodology used to build the class IX block

Manufacturing. Evaluation Report from a Limited School Trial of a Teaching Unit of the High School Geography Project.

ERIC Educational Resources Information Center

Bogatz, Gerry Ann

The methodology used in the evaluation of this unit is the same as that described in SO 000 433. The same seventy teachers were involved along with 2,400 seventh through twelfth grade students. There were nine activities in this unit: 1) Geographic Patterns of Manufacturing in the United States; 2) Definition of Manufacturing; 3) and 4)…

Costing maternal health services in South Tanzania: a case study from Mtwara Urban District.

PubMed

von Both, Claudia; Jahn, Albrecht; Fleba, Steffen

2008-05-01

The following paper presents the methodology and results of a costing exercise of maternal health services in Tanzania. The main objective of this study was to determine the actual costs of antenatal and obstetric care in different health institutions in a district in Tanzania as a basis of more efficient resource allocation. A costing tool was developed that allows the calculation of costs of service units, such as deliveries and antenatal care, and separates these costs from the costs of other services. Time consumed by each activity was used as an allocation key. For that purpose, we recorded the personnel consumption with different time-study methodologies. This approach was tested and implemented in Mtwara Urban District, South Tanzania. The results were analyzed by a spreadsheet program. The paper presents average costs for different costing units of maternal care. Among other findings, we found that the cost of a normal vaginal delivery is US $12.30 in a dispensary and US $6.30 in the hospital--a result that needs explanation, as usually one would expect that hospitals are more cost-intensive than first-line facilities. However, dispensaries are grossly underutilized so that the costs per service unit are rather high. The cost for surgical delivery (only in hospitals) was found to be US $69.26 and the average cost per antenatal care consultation (only at dispensaries) was US $2.50. We conclude that improved planning of elective services is a prerequisite for more effective and efficient use of personnel resources. In addition, the definition of medically and economically sound standards, in particular staffing standards, is critical to make cost analysis an effective management tool to guide rational resource allocation.

Sampling flies or sampling flaws? Experimental design and inference strength in forensic entomology.

PubMed

Michaud, J-P; Schoenly, Kenneth G; Moreau, G

2012-01-01

Forensic entomology is an inferential science because postmortem interval estimates are based on the extrapolation of results obtained in field or laboratory settings. Although enormous gains in scientific understanding and methodological practice have been made in forensic entomology over the last few decades, a majority of the field studies we reviewed do not meet the standards for inference, which are 1) adequate replication, 2) independence of experimental units, and 3) experimental conditions that capture a representative range of natural variability. Using a mock case-study approach, we identify design flaws in field and lab experiments and suggest methodological solutions for increasing inference strength that can inform future casework. Suggestions for improving data reporting in future field studies are also proposed.

Model-based classification of CPT data and automated lithostratigraphic mapping for high-resolution characterization of a heterogeneous sedimentary aquifer

PubMed Central

Mallants, Dirk; Batelaan, Okke; Gedeon, Matej; Huysmans, Marijke; Dassargues, Alain

2017-01-01

Cone penetration testing (CPT) is one of the most efficient and versatile methods currently available for geotechnical, lithostratigraphic and hydrogeological site characterization. Currently available methods for soil behaviour type classification (SBT) of CPT data however have severe limitations, often restricting their application to a local scale. For parameterization of regional groundwater flow or geotechnical models, and delineation of regional hydro- or lithostratigraphy, regional SBT classification would be very useful. This paper investigates the use of model-based clustering for SBT classification, and the influence of different clustering approaches on the properties and spatial distribution of the obtained soil classes. We additionally propose a methodology for automated lithostratigraphic mapping of regionally occurring sedimentary units using SBT classification. The methodology is applied to a large CPT dataset, covering a groundwater basin of ~60 km2 with predominantly unconsolidated sandy sediments in northern Belgium. Results show that the model-based approach is superior in detecting the true lithological classes when compared to more frequently applied unsupervised classification approaches or literature classification diagrams. We demonstrate that automated mapping of lithostratigraphic units using advanced SBT classification techniques can provide a large gain in efficiency, compared to more time-consuming manual approaches and yields at least equally accurate results. PMID:28467468

Model-based classification of CPT data and automated lithostratigraphic mapping for high-resolution characterization of a heterogeneous sedimentary aquifer.

PubMed

Rogiers, Bart; Mallants, Dirk; Batelaan, Okke; Gedeon, Matej; Huysmans, Marijke; Dassargues, Alain

2017-01-01

Cone penetration testing (CPT) is one of the most efficient and versatile methods currently available for geotechnical, lithostratigraphic and hydrogeological site characterization. Currently available methods for soil behaviour type classification (SBT) of CPT data however have severe limitations, often restricting their application to a local scale. For parameterization of regional groundwater flow or geotechnical models, and delineation of regional hydro- or lithostratigraphy, regional SBT classification would be very useful. This paper investigates the use of model-based clustering for SBT classification, and the influence of different clustering approaches on the properties and spatial distribution of the obtained soil classes. We additionally propose a methodology for automated lithostratigraphic mapping of regionally occurring sedimentary units using SBT classification. The methodology is applied to a large CPT dataset, covering a groundwater basin of ~60 km2 with predominantly unconsolidated sandy sediments in northern Belgium. Results show that the model-based approach is superior in detecting the true lithological classes when compared to more frequently applied unsupervised classification approaches or literature classification diagrams. We demonstrate that automated mapping of lithostratigraphic units using advanced SBT classification techniques can provide a large gain in efficiency, compared to more time-consuming manual approaches and yields at least equally accurate results.

Automated mapping of mineral groups and green vegetation from Landsat Thematic Mapper imagery with an example from the San Juan Mountains, Colorado

USGS Publications Warehouse

Rockwell, Barnaby W.

2013-01-01

Multispectral satellite data acquired by the ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) and Landsat 7 Enhanced Thematic Mapper Plus (TM) sensors are being used to populate an online Geographic Information System (GIS) of the spatial occurrence of mineral groups and green vegetation across the western conterminous United States and Alaska. These geospatial data are supporting U.S. Geological Survey national-scale mineral deposit database development and other mineral resource and geoenvironmental research as a means of characterizing mineral exposures related to mined and unmined hydrothermally altered rocks and mine waste. This report introduces a new methodology for the automated analysis of Landsat TM data that has been applied to more than 180 scenes covering the western United States. A map of mineral groups and green vegetation produced using this new methodology that covers the western San Juan Mountains, Colorado, and the Four Corners Region is presented. The map is provided as a layered GeoPDF and in GIS-ready digital format. TM data analysis results from other well-studied and mineralogically characterized areas with strong hydrothermal alteration and (or) supergene weathering of near-surface sulfide minerals are also shown and compared with results derived from ASTER data analysis.

Calibration of CT Hounsfield units for proton therapy treatment planning: use of kilovoltage and megavoltage images and comparison of parameterized methods

NASA Astrophysics Data System (ADS)

De Marzi, L.; Lesven, C.; Ferrand, R.; Sage, J.; Boulé, T.; Mazal, A.

2013-06-01

Proton beam range is of major concern, in particular, when images used for dose computations are artifacted (for example in patients with surgically treated bone tumors). We investigated several conditions and methods for determination of computed tomography Hounsfield unit (CT-HU) calibration curves, using two different conversion schemes. A stoichiometric methodology was used on either kilovoltage (kV) or megavoltage (MV) CT images and the accuracy of the calibration methods was evaluated. We then studied the effects of metal artifacts on proton dose distributions using metallic implants in rigid phantom mimicking clinical conditions. MV-CT images were used to evaluate relative proton stopping power in certain high density implants, and a methodology is proposed for accurate delineation and dose calculation, using a combined set of kV- and MV-CT images. Our results show good agreement between measurements and dose calculations or relative proton stopping power determination (<5%). The results also show that range uncertainty increases when only kV-CT images are used or when no correction is made on artifacted images. However, differences between treatment plans calculated on corrected kV-CT data and MV-CT data remained insignificant in the investigated patient case, even with streak artifacts and volume effects that reduce the accuracy of manual corrections.

The Influence of State Policies on Critical Infrastructure Resilience: An Approach for Analyzing Transportation and Capital Investment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wall, Thomas; Trail, Jessica; Gevondyan, Erna

During times of crisis, communities and regions rely heavily on critical infrastructure systems to support their emergency management response and recovery activities. Therefore, the resilience of critical infrastructure systems to crises is a pivotal factor to a community’s overall resilience. Critical infrastructure resilience can be influenced by many factors, including State policies – which are not always uniform in their structure or application across the United States – were identified by the U.S. Department of Homeland Security as an area of particular interest with respect to their the influence on the resilience of critical infrastructure systems. This study focuses onmore » developing an analytical methodology to assess links between policy and resilience, and applies that methodology to critical infrastructure in the Transportation Systems Sector. Specifically, this study seeks to identify potentially influential linkages between State transportation capital funding policies and the resilience of bridges located on roadways that are under the management of public agencies. This study yielded notable methodological outcomes, including the general capability of the analytical methodology to yield – in the case of some States – significant results connecting State policies with critical infrastructure resilience, with the suggestion that further refinement of the methodology may be beneficial.« less

Time motion analysis of nursing work in ICU, telemetry and medical-surgical units.

PubMed

Schenk, Elizabeth; Schleyer, Ruth; Jones, Cami R; Fincham, Sarah; Daratha, Kenn B; Monsen, Karen A

2017-11-01

This study examined nurses' work, comparing nursing interventions and locations across three units in a United States hospital using Omaha System standardized terminology as the organizing framework. The differences in nurses' acute-care work across unit types are not well understood. Prior investigators have used time-motion methodologies; few have compared differences across units, nor used standardized terminology. Nurse-observers recorded locations and interventions of nurses on three acute-care units using hand-held devices and web-based TimeCaT ™ software. Nursing interventions were mapped to Omaha System terms. Unit-differences were analysed. Nurses changed locations approximately every 2 min, and averaged approximately one intervention/minute. Unit differences were found in both the interventions performed and the locations. Most interventions were case-management related, demonstrating the nurses' patient management/coordination role. Unit differences in nursing interventions and location were found among three unit types. Omaha System terminology, as well as the observational method used, were found to be feasible and practical. Nursing work varies by unit, yet managers have not been armed with empirical data with which to make more informed decisions about nurses' work priorities, clinical outcomes, patient satisfaction, staff satisfaction and cost. The results from this study will help them to do so. © 2017 John Wiley & Sons Ltd.

Methodology to Estimate the Quantity, Composition, and Management of Construction and Demolition Debris in the United States

EPA Science Inventory

This report, Methodology to Estimate the Quantity, Composition and Management of Construction and Demolition Debris in the US, was developed to expand access to data on CDD in the US and to support research on CDD and sustainable materials management. Since past US EPA CDD estima...

Media Literacy, Education & (Civic) Capability: A Transferable Methodology

ERIC Educational Resources Information Center

McDougall, Julian; Berger, Richard; Fraser, Pete; Zezulkova, Marketa

2015-01-01

This article explores the relationship between a formal media educational encounter in the UK and the broad objectives for media and information literacy education circulating in mainland Europe and the US. A pilot study, developed with a special interest group of the United Kingdom Literacy Association, applied a three-part methodology for…

Characterizing crown fuel distribution for conifers in the interior western United States

Treesearch

Seth Ex; Frederick W. Smith; Tara Keyser

2015-01-01

Canopy fire hazard evaluation is essential for prioritizing fuel treatments and for assessing potential risk to firefighters during suppression activities. Fire hazard is usually expressed as predicted potential fire behavior, which is sensitive to the methodology used to quantitatively describe fuel profiles: methodologies that assume that fuel is distributed...

75 FR 8177 - WTO Dispute Settlement Proceeding Regarding United States-Anti-Dumping Measures on Certain Shrimp...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

... of certain frozen warmwater shrimp from Vietnam (Investigation A-552-801), and various U.S. laws, regulations, administrative procedures, practices, and methodologies. That request may be found at http://www..., practices, and methodologies, including (1) the Tariff Act of 1930, as amended, in particular sections 736...

A CLIMATOLOGY OF WATER BUDGET VARIABLE FOR THE NORTHEASTERN UNITED STATES

EPA Science Inventory

A Climatology of Water Budget Variables for the Northeast United States (Leathers and Robinson 1995). Climatic division precipitation and temperature data are used to calculate water budget variables based on the Thornthwaite/Mather climatic water budget methodology. Two water b...

Dosimetric Consistency of Co-60 Teletherapy Unit- a ten years Study

PubMed Central

Baba, Misba H; Mohib-ul-Haq, M.; Khan, Aijaz A.

2013-01-01

Objective The goal of the Radiation standards and Dosimetry is to ensure that the output of the Teletherapy Unit is within ±2% of the stated one and the output of the treatment dose calculation methods are within ±5%. In the present paper, we studied the dosimetry of Cobalt-60 (Co-60) Teletherapy unit at Sher-I-Kashmir Institute of Medical Sciences (SKIMS) for last 10 years. Radioactivity is the phenomenon of disintegration of unstable nuclides called radionuclides. Among these radionuclides, Cobalt-60, incorporated in Telecobalt Unit, is commonly used in therapeutic treatment of cancer. Cobalt-60 being unstable decays continuously into Ni-60 with half life of 5.27 years thereby resulting in the decrease in its activity, hence dose rate (output). It is, therefore, mandatory to measure the dose rate of the Cobalt-60 source regularly so that the patient receives the same dose every time as prescribed by the radiation oncologist. The under dosage may lead to unsatisfactory treatment of cancer and over dosage may cause radiation hazards. Our study emphasizes the consistency between actual output and output obtained using decay method. Methodology The methodology involved in the present study is the calculations of actual dose rate of Co-60 Teletherapy Unit by two techniques i.e. Source to Surface Distance (SSD) and Source to Axis Distance (SAD), used for the External Beam Radiotherapy, of various cancers, using the standard methods. Thereby, a year wise comparison has been made between average actual dosimetric output (dose rate) and the average expected output values (obtained by using decay method for Co-60.) Results The present study shows that there is a consistency in the average output (dose rate) obtained by the actual dosimetry values and the expected output values obtained using decay method. The values obtained by actual dosimetry are within ±2% of the expected values. Conclusion The results thus obtained in a year wise comparison of average output by actual dosimetry done regularly as a part of Quality Assurance of the Telecobalt Radiotherapy Unit and its deviation from the expected output data is within the permissible limits. Thus our study shows a trend towards uniformity and a better dose delivery. PMID:23559901

The Minicommunity Design to Assess Indirect Effects of Vaccination.

PubMed

Halloran, M Elizabeth

2012-08-01

We propose the minicommunity design to estimate indirect effects of vaccination. Establishing indirect effects of vaccination in unvaccinated subpopulations could have important implications for global vaccine policies. In the minicommunity design, the household or other small transmission unit serves as the cluster in which to estimate indirect effects of vaccination, similar to studies in larger communities to estimate indirect, total, and overall effects. Examples from the literature include studies in small transmission units to estimate indirect effects of pertussis, pneumococcal, influenza, and cholera vaccines. We characterize the minicommunity design by several methodologic considerations, including the assignment mechanism, ascertainment, the role of transmission outside the transmission unit, and the relation of the size of the transmission unit to number of people vaccinated. The minicommunity study for indirect effects is contrasted with studies to estimate vaccine effects on infectiousness and protective effects under conditions of household exposure within small transmission units. The minicommunity design can be easily implemented in individually randomized studies by enrolling and following-up members of households of the randomized individuals. The methodology for the minicommunity design for estimating indirect effects of vaccination deserves much future research.

A tribal abstraction network for SNOMED CT target hierarchies without attribute relationships.

PubMed

Ochs, Christopher; Geller, James; Perl, Yehoshua; Chen, Yan; Agrawal, Ankur; Case, James T; Hripcsak, George

2015-05-01

Large and complex terminologies, such as Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT), are prone to errors and inconsistencies. Abstraction networks are compact summarizations of the content and structure of a terminology. Abstraction networks have been shown to support terminology quality assurance. In this paper, we introduce an abstraction network derivation methodology which can be applied to SNOMED CT target hierarchies whose classes are defined using only hierarchical relationships (ie, without attribute relationships) and similar description-logic-based terminologies. We introduce the tribal abstraction network (TAN), based on the notion of a tribe-a subhierarchy rooted at a child of a hierarchy root, assuming only the existence of concepts with multiple parents. The TAN summarizes a hierarchy that does not have attribute relationships using sets of concepts, called tribal units that belong to exactly the same multiple tribes. Tribal units are further divided into refined tribal units which contain closely related concepts. A quality assurance methodology that utilizes TAN summarizations is introduced. A TAN is derived for the Observable entity hierarchy of SNOMED CT, summarizing its content. A TAN-based quality assurance review of the concepts of the hierarchy is performed, and erroneous concepts are shown to appear more frequently in large refined tribal units than in small refined tribal units. Furthermore, more erroneous concepts appear in large refined tribal units of more tribes than of fewer tribes. In this paper we introduce the TAN for summarizing SNOMED CT target hierarchies. A TAN was derived for the Observable entity hierarchy of SNOMED CT. A quality assurance methodology utilizing the TAN was introduced and demonstrated. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A Study about Kalman Filters Applied to Embedded Sensors

PubMed Central

Valade, Aurélien; Acco, Pascal; Grabolosa, Pierre; Fourniols, Jean-Yves

2017-01-01

Over the last decade, smart sensors have grown in complexity and can now handle multiple measurement sources. This work establishes a methodology to achieve better estimates of physical values by processing raw measurements within a sensor using multi-physical models and Kalman filters for data fusion. A driving constraint being production cost and power consumption, this methodology focuses on algorithmic complexity while meeting real-time constraints and improving both precision and reliability despite low power processors limitations. Consequently, processing time available for other tasks is maximized. The known problem of estimating a 2D orientation using an inertial measurement unit with automatic gyroscope bias compensation will be used to illustrate the proposed methodology applied to a low power STM32L053 microcontroller. This application shows promising results with a processing time of 1.18 ms at 32 MHz with a 3.8% CPU usage due to the computation at a 26 Hz measurement and estimation rate. PMID:29206187

Delivering successful randomized controlled trials in surgery: Methods to optimize collaboration and study design.

PubMed

Blencowe, Natalie S; Cook, Jonathan A; Pinkney, Thomas; Rogers, Chris; Reeves, Barnaby C; Blazeby, Jane M

2017-04-01

Randomized controlled trials in surgery are notoriously difficult to design and conduct due to numerous methodological and cultural challenges. Over the last 5 years, several UK-based surgical trial-related initiatives have been funded to address these issues. These include the development of Surgical Trials Centers and Surgical Specialty Leads (individual surgeons responsible for championing randomized controlled trials in their specialist fields), both funded by the Royal College of Surgeons of England; networks of research-active surgeons in training; and investment in methodological research relating to surgical randomized controlled trials (to address issues such as recruitment, blinding, and the selection and standardization of interventions). This article discusses these initiatives more in detail and provides exemplar cases to illustrate how the methodological challenges have been tackled. The initiatives have surpassed expectations, resulting in a renaissance in surgical research throughout the United Kingdom, such that the number of patients entering surgical randomized controlled trials has doubled.

A methodology for translating positional error into measures of attribute error, and combining the two error sources

Treesearch

Yohay Carmel; Curtis Flather; Denis Dean

2006-01-01

This paper summarizes our efforts to investigate the nature, behavior, and implications of positional error and attribute error in spatiotemporal datasets. Estimating the combined influence of these errors on map analysis has been hindered by the fact that these two error types are traditionally expressed in different units (distance units, and categorical units,...

The Development of a Socioscientific Issues-Based Curriculum Unit for Middle School Students: Global Warming Issue

ERIC Educational Resources Information Center

Atabey, Nejla; Topçu, Mustafa Sami

2017-01-01

In this study, we aimed at developing "Human and Environment" unit around SSI based instruction. We followed action research methodology in development and implementation of the unit. The participants of this study were 24 seventh graders students and the instruction was extended to eight and a half weeks, taking four hours in a week.…

A Research-Informed Instructional Unit to Teach the Nature of Science to Pre-Service Science Teachers

ERIC Educational Resources Information Center

Aduriz-Bravo, Agustin; Izquierdo-Aymerich, Merce

2009-01-01

In this paper we discuss the foundations and process of design of a research-informed instructional unit aimed for pre-service science teacher education. The unit covers some key ideas on the nature of science (around methodology, theory change, scientific inference and explanation, values, gender issues) anchoring them in a well-known episode…

Productivity Assessment and Improvement Measurement of Decision Making Units--An Application for Ranking Cities in Israel

ERIC Educational Resources Information Center

Hadad, Yossi; Keren, Baruch; Ben-Yair, Avner

2010-01-01

In this paper we will demonstrate how productivity and improvement rate of urban organizational units (called also Decision Making Units--DMUs) may be assessed when measured along several time periods. The assessment and subsequent ranking of cities is achieved by means of the Data Envelopment Analysis (DEA) methodology to determine DMU's…

Probabilistic, Seismically-Induced Landslide Hazard Mapping of Western Oregon

NASA Astrophysics Data System (ADS)

Olsen, M. J.; Sharifi Mood, M.; Gillins, D. T.; Mahalingam, R.

2015-12-01

Earthquake-induced landslides can generate significant damage within urban communities by damaging structures, obstructing lifeline connection routes and utilities, generating various environmental impacts, and possibly resulting in loss of life. Reliable hazard and risk maps are important to assist agencies in efficiently allocating and managing limited resources to prepare for such events. This research presents a new methodology in order to communicate site-specific landslide hazard assessments in a large-scale, regional map. Implementation of the proposed methodology results in seismic-induced landslide hazard maps that depict the probabilities of exceeding landslide displacement thresholds (e.g. 0.1, 0.3, 1.0 and 10 meters). These maps integrate a variety of data sources including: recent landslide inventories, LIDAR and photogrammetric topographic data, geology map, mapped NEHRP site classifications based on available shear wave velocity data in each geologic unit, and USGS probabilistic seismic hazard curves. Soil strength estimates were obtained by evaluating slopes present along landslide scarps and deposits for major geologic units. Code was then developed to integrate these layers to perform a rigid, sliding block analysis to determine the amount and associated probabilities of displacement based on each bin of peak ground acceleration in the seismic hazard curve at each pixel. The methodology was applied to western Oregon, which contains weak, weathered, and often wet soils at steep slopes. Such conditions have a high landslide hazard even without seismic events. A series of landslide hazard maps highlighting the probabilities of exceeding the aforementioned thresholds were generated for the study area. These output maps were then utilized in a performance based design framework enabling them to be analyzed in conjunction with other hazards for fully probabilistic-based hazard evaluation and risk assessment. a) School of Civil and Construction Engineering, Oregon State University, Corvallis, OR 97331, USA

A GIS semiautomatic tool for classifying and mapping wetland soils

NASA Astrophysics Data System (ADS)

Moreno-Ramón, Héctor; Marqués-Mateu, Angel; Ibáñez-Asensio, Sara

2016-04-01

Wetlands are one of the most productive and biodiverse ecosystems in the world. Water is the main resource and controls the relationships between agents and factors that determine the quality of the wetland. However, vegetation, wildlife and soils are also essential factors to understand these environments. It is possible that soils have been the least studied resource due to their sampling problems. This feature has caused that sometimes wetland soils have been classified broadly. The traditional methodology states that homogeneous soil units should be based on the five soil forming-factors. The problem can appear when the variation of one soil-forming factor is too small to differentiate a change in soil units, or in case that there is another factor, which is not taken into account (e.g. fluctuating water table). This is the case of Albufera of Valencia, a coastal wetland located in the middle east of the Iberian Peninsula (Spain). The saline water table fluctuates throughout the year and it generates differences in soils. To solve this problem, the objectives of this study were to establish a reliable methodology to avoid that problems, and develop a GIS tool that would allow us to define homogeneous soil units in wetlands. This step is essential for the soil scientist, who has to decide the number of soil profiles in a study. The research was conducted with data from 133 soil pits of a previous study in the wetland. In that study, soil parameters of 401 samples (organic carbon, salinity, carbonates, n-value, etc.) were analysed. In a first stage, GIS layers were generated according to depth. The method employed was Bayesian Maxim Entropy. Subsequently, it was designed a program in GIS environment that was based on the decision tree algorithms. The goal of this tool was to create a single layer, for each soil variable, according to the different diagnostic criteria of Soil Taxonomy (properties, horizons and diagnostic epipedons). At the end, the program generated a set of layers with the geographical information, which corresponded with each diagnostic criteria. Finally, the superposition of layers generated the different homogeneous soil units where the soil scientist should locate the soil profiles. Historically, the Albufera of Valencia has been classified as a soil homogeneous unit, but it was demonstrated that there were six homogeneous units after the methodology and the GIS tool application. In that regard, the outcome reveals that it had been necessary to open only six profiles, against the 19 profiles opened when the real study was carried out. As a conclusion, the methodology and the SIG tool demonstrated that could be employed in areas where the soil forming-factors cannot be distinguished. The application of rapid measurement methods and this methodology could economise the definition process of homogeneous units.

Biophysical impacts of climate-smart agriculture in the Midwest United States

USDA-ARS?s Scientific Manuscript database

The potential impacts of climate change in the Midwest United States present unprecedented challenges to regional agriculture. In response to these challenges, a variety of climate-smart agricultural methodologies have been proposed to retain or improve crop yields, reduce agricultural greenhouse ga...

DRASTIC: A STANDARDIZED SYSTEM FOR EVALUATING GROUND WATER POLLUTION USING HYDROGEOLOGIC SETTINGS

EPA Science Inventory

A methodology is described that will allow the pollution potential of any hydrogeologic setting to be systematically evaluated anywhere in the United States. The system has two major portions: the designation of mappable units, termed hydrogeologic settings, and the superposit...

Simulating the heterogeneity in braided channel belt deposits: 1. A geometric-based methodology and code

NASA Astrophysics Data System (ADS)

Ramanathan, Ramya; Guin, Arijit; Ritzi, Robert W.; Dominic, David F.; Freedman, Vicky L.; Scheibe, Timothy D.; Lunt, Ian A.

2010-04-01

A geometric-based simulation methodology was developed and incorporated into a computer code to model the hierarchical stratal architecture, and the corresponding spatial distribution of permeability, in braided channel belt deposits. The code creates digital models of these deposits as a three-dimensional cubic lattice, which can be used directly in numerical aquifer or reservoir models for fluid flow. The digital models have stratal units defined from the kilometer scale to the centimeter scale. These synthetic deposits are intended to be used as high-resolution base cases in various areas of computational research on multiscale flow and transport processes, including the testing of upscaling theories. The input parameters are primarily univariate statistics. These include the mean and variance for characteristic lengths of sedimentary unit types at each hierarchical level, and the mean and variance of log-permeability for unit types defined at only the lowest level (smallest scale) of the hierarchy. The code has been written for both serial and parallel execution. The methodology is described in part 1 of this paper. In part 2 (Guin et al., 2010), models generated by the code are presented and evaluated.

Simulating the Heterogeneity in Braided Channel Belt Deposits: Part 1. A Geometric-Based Methodology and Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramanathan, Ramya; Guin, Arijit; Ritzi, Robert W.

A geometric-based simulation methodology was developed and incorporated into a computer code to model the hierarchical stratal architecture, and the corresponding spatial distribution of permeability, in braided channel belt deposits. The code creates digital models of these deposits as a three-dimensional cubic lattice, which can be used directly in numerical aquifer or reservoir models for fluid flow. The digital models have stratal units defined from the km scale to the cm scale. These synthetic deposits are intended to be used as high-resolution base cases in various areas of computational research on multiscale flow and transport processes, including the testing ofmore » upscaling theories. The input parameters are primarily univariate statistics. These include the mean and variance for characteristic lengths of sedimentary unit types at each hierarchical level, and the mean and variance of log-permeability for unit types defined at only the lowest level (smallest scale) of the hierarchy. The code has been written for both serial and parallel execution. The methodology is described in Part 1 of this series. In Part 2, models generated by the code are presented and evaluated.« less

Remedial Action Assessment System (RAAS): A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buelt, J.L.; Stottlemyre, J.A.; White, M.K.

1991-09-01

Because of the great complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, the DOE is supporting the development of a computer-based methodology to streamline the remedial investigations/feasibility study process required for DOE operable units. DOE operable units are generally more complex in nature because of the existence of multiple waste sites within many of the operable units and the presence of mixed radioactive and hazardous chemical wastes. Consequently, Pacific Northwest Laboratory (PNL) is developing the Remedial Action Assessment System (RAAS), which is aimed at screening, linking, and evaluating establishment technology processmore » options in support of conducting feasibility studies under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). It is also intended to do the same in support of corrective measures studies requires by the Resource Conservation and Recovery Act (RCRA). This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses information on technologies in a graphical and tabular manner, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

Remedial Action Assessment System (RAAS): A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buelt, J.L.; Stottlemyre, J.A.; White, M.K.

1991-02-01

Because of the great complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, the DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process required for DOE operable units. DOE operable units are generally more complex in nature because of the existence of multiple waste sites within many of the operable units and the presence of mixed radioactive and hazardous chemical wastes. Consequently, Pacific Northwest Laboratory (PNL) is developing the Remedial Action Assessment System (RAAS), which is aimed at screening, linking, and evaluating established technology processmore » options in support of conducting feasibility studies under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). It is also intended to do the same in support of corrective measures studies required by the Resource Conservation and Recovery Act (RCRA). This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses information on technologies in a graphical and tabular manner, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

A combination of HPLC and automated data analysis for monitoring the efficiency of high-pressure homogenization.

PubMed

Eggenreich, Britta; Rajamanickam, Vignesh; Wurm, David Johannes; Fricke, Jens; Herwig, Christoph; Spadiut, Oliver

2017-08-01

Cell disruption is a key unit operation to make valuable, intracellular target products accessible for further downstream unit operations. Independent of the applied cell disruption method, each cell disruption process must be evaluated with respect to disruption efficiency and potential product loss. Current state-of-the-art methods, like measuring the total amount of released protein and plating-out assays, are usually time-delayed and involve manual intervention making them error-prone. An automated method to monitor cell disruption efficiency at-line is not available to date. In the current study we implemented a methodology, which we had originally developed to monitor E. coli cell integrity during bioreactor cultivations, to automatically monitor and evaluate cell disruption of a recombinant E. coli strain by high-pressure homogenization. We compared our tool with a library of state-of-the-art methods, analyzed the effect of freezing the biomass before high-pressure homogenization and finally investigated this unit operation in more detail by a multivariate approach. A combination of HPLC and automated data analysis describes a valuable, novel tool to monitor and evaluate cell disruption processes. Our methodology, which can be used both in upstream (USP) and downstream processing (DSP), describes a valuable tool to evaluate cell disruption processes as it can be implemented at-line, gives results within minutes after sampling and does not need manual intervention.

Mapping R&D within Multinational Networks: Evidence from the Electronics Industry

NASA Astrophysics Data System (ADS)

Urze, Paula; Manatos, Maria João

Based on the final results of the R&D.COM - Local R&D COMpetencies within Global Value Chains project, this paper aims at mapping the trajectories of delocalised R&D units within a multinational’s global strategy and designing the knowledge flows within the global value chain. This analysis was performed using typologies proposed in the theoretical framework, which help us to have an overview of the network. The methodology is grounded on one extended case study that involves a local R&D unit (Portugal), a foreign R&D unit (Netherlands) and the headquarters (Norway) - developed on a multinational from the electronics industry. This case is an example of a multinational company where R&D is developed mainly in the headquarters but it is also delocalised to some subsidiaries with a certain level of autonomy.

Hybrid response surface methodology-artificial neural network optimization of drying process of banana slices in a forced convective dryer.

PubMed

Taheri-Garavand, Amin; Karimi, Fatemeh; Karimi, Mahmoud; Lotfi, Valiullah; Khoobbakht, Golmohammad

2018-06-01

The aim of the study is to fit models for predicting surfaces using the response surface methodology and the artificial neural network to optimize for obtaining the maximum acceptability using desirability functions methodology in a hot air drying process of banana slices. The drying air temperature, air velocity, and drying time were chosen as independent factors and moisture content, drying rate, energy efficiency, and exergy efficiency were dependent variables or responses in the mentioned drying process. A rotatable central composite design as an adequate method was used to develop models for the responses in the response surface methodology. Moreover, isoresponse contour plots were useful to predict the results by performing only a limited set of experiments. The optimum operating conditions obtained from the artificial neural network models were moisture content 0.14 g/g, drying rate 1.03 g water/g h, energy efficiency 0.61, and exergy efficiency 0.91, when the air temperature, air velocity, and drying time values were equal to -0.42 (74.2 ℃), 1.00 (1.50 m/s), and -0.17 (2.50 h) in the coded units, respectively.

Mechanical modulation method for ultrasensitive phase measurements in photonics biosensing.

PubMed

Patskovsky, S; Maisonneuve, M; Meunier, M; Kabashin, A V

2008-12-22

A novel polarimetry methodology for phase-sensitive measurements in single reflection geometry is proposed for applications in optical transduction-based biological sensing. The methodology uses altering step-like chopper-based mechanical phase modulation for orthogonal s- and p- polarizations of light reflected from the sensing interface and the extraction of phase information at different harmonics of the modulation. We show that even under a relatively simple experimental arrangement, the methodology provides the resolution of phase measurements as low as 0.007 deg. We also examine the proposed approach using Total Internal Reflection (TIR) and Surface Plasmon Resonance (SPR) geometries. For TIR geometry, the response appears to be strongly dependent on the prism material with the best values for high refractive index Si. The detection limit for Si-based TIR is estimated as 10(-5) in terms Refractive Index Units (RIU) change. SPR geometry offers much stronger phase response due to a much sharper phase characteristics. With the detection limit of 3.2*10(-7) RIU, the proposed methodology provides one of best sensitivities for phase-sensitive SPR devices. Advantages of the proposed method include high sensitivity, simplicity of experimental setup and noise immunity as a result of a high stability modulation.

How do the methodological choices of your climate change study affect your results? A hydrologic case study across the Pacific Northwest

NASA Astrophysics Data System (ADS)

Chegwidden, O.; Nijssen, B.; Rupp, D. E.; Kao, S. C.; Clark, M. P.

2017-12-01

We describe results from a large hydrologic climate change dataset developed across the Pacific Northwestern United States and discuss how the analysis of those results can be seen as a framework for other large hydrologic ensemble investigations. This investigation will better inform future modeling efforts and large ensemble analyses across domains within and beyond the Pacific Northwest. Using outputs from the Coupled Model Intercomparison Project Phase 5 (CMIP5), we provide projections of hydrologic change for the domain through the end of the 21st century. The dataset is based upon permutations of four methodological choices: (1) ten global climate models (2) two representative concentration pathways (3) three meteorological downscaling methods and (4) four unique hydrologic model set-ups (three of which entail the same hydrologic model using independently calibrated parameter sets). All simulations were conducted across the Columbia River Basin and Pacific coastal drainages at a 1/16th ( 6 km) resolution and at a daily timestep. In total, the 172 distinct simulations offer an updated, comprehensive view of climate change projections through the end of the 21st century. The results consist of routed streamflow at 400 sites throughout the domain as well as distributed spatial fields of relevant hydrologic variables like snow water equivalent and soil moisture. In this presentation, we discuss the level of agreement with previous hydrologic projections for the study area and how these projections differ with specific methodological choices. By controlling for some methodological choices we can show how each choice affects key climatic change metrics. We discuss how the spread in results varies across hydroclimatic regimes. We will use this large dataset as a case study for distilling a wide range of hydroclimatological projections into useful climate change assessments.

Evaluation of components of residential treatment by Medicaid ICF-MR surveys: a validity assessment.

PubMed Central

Reid, D H; Parsons, M B; Green, C W; Schepis, M M

1991-01-01

We evaluated the proficiency of the federal Medicaid program's survey process for evaluating intermediate care facilities for the mentally retarded. In Study 1, an observational analysis of active treatment during leisure times in living units suggested that these surveys did not discriminate between certified and noncertified units. In Study 2, a reactivity analysis of a survey indicated that direct-care staff performed differently during the survey by increasing interactions with clients and decreasing nonwork behavior. Similarly, results of Study 3 showed increases in client access to leisure materials during a survey. In Study 4, questionnaire results indicated considerable variability among service providers' opinions on the consistency, accuracy, and objectivity with which survey teams determine agency standard compliance. Results are discussed regarding effects of the questionable proficiency of survey processes and the potential utility of behavioral assessment methodologies to improve such processes. PMID:1909696

Implementing the Defense Business Operations Fund, The Case of the Naval Air Reserve at Point Mugu

DTIC Science & Technology

1993-12-13

the basis of financial operating results. Some examples of unit cost measures that have been established are: * Finance and Accounting service...Methodology And Business Decisions, National Association of Accountants , 1976. COMNAVRESFOR P7100.1A. Subject: Budget and Financial Guidance Manual. Deakin...fulfillment of the requirements for the degree of MASTER OF SCIENCE IN FINANCIAL MANAGEMENT from the NAVAL POSTGRADUATE SCHOOL December 1993 Author

Investigation on application of genetic algorithms to optimal reactive power dispatch of power systems

NASA Astrophysics Data System (ADS)

Wu, Q. H.; Ma, J. T.

1993-09-01

A primary investigation into application of genetic algorithms in optimal reactive power dispatch and voltage control is presented. The application was achieved, based on (the United Kingdom) National Grid 48 bus network model, using a novel genetic search approach. Simulation results, compared with that obtained using nonlinear programming methods, are included to show the potential of applications of the genetic search methodology in power system economical and secure operations.

Can National Research Assessment Exercises Be Used Locally to Inform Research Strategy Development? The Description of a Methodological Approach to the UK RAE 2008 Results with a Focus on One Institution

ERIC Educational Resources Information Center

Reidpath, Daniel D.; Allotey, Pascale

2010-01-01

National mechanisms for comparing the research profiles of higher education institutions (HEIs) have become increasingly common. Probably the best known of these is the Research Assessment Exercise (RAE) conducted in the United Kingdom, and used as the basis for the allocation of research funding. Such exercises are expensive. They would have…

Teachers' Self-Perceptions in England and Germany: Methodological Nationalism and Negative Points of Reference in Comparative Research

ERIC Educational Resources Information Center

von Bargen, Imke

2017-01-01

The field of comparative education traditionally compares nations and cultures to gain a deeper understanding of educational phenomena. The nation-state often functions as the only unit of comparison, which increases methodological nationalism. It is dangerous to draw simplistic conclusions because they focus on national particularities alone and…

A Methodology for Developing Learning Objects for Web Course Delivery

ERIC Educational Resources Information Center

Stauffer, Karen; Lin, Fuhua; Koole, Marguerite

2008-01-01

This article presents a methodology for developing learning objects for web-based courses using the IMS Learning Design (IMS LD) specification. We first investigated the IMS LD specification, determining how to use it with online courses and the student delivery model, and then applied this to a Unit of Learning (UOL) for online computer science…

A Longitudinal Evaluation of a Project-Based Learning Initiative in an Engineering Undergraduate Programme

ERIC Educational Resources Information Center

Hall, Wayne; Palmer, Stuart; Bennett, Mitchell

2012-01-01

Project-based learning (PBL) is a well-known student-centred methodology for engineering design education. The methodology claims to offer a number of educational benefits. This paper evaluates the student perceptions of the initial and second offering of a first-year design unit at Griffith University in Australia. It builds on an earlier…

A Methodology to Understand Student Choice of Higher Education Institutions: The Case of the United Kingdom

ERIC Educational Resources Information Center

McManus, Richard; Haddock-Fraser, Janet; Rands, Peter

2017-01-01

The need to understand how prospective students decide which higher education institution to attend is becoming of paramount importance as the policy context for higher education moves towards market-based systems in many countries. This paper provides a novel methodology by which student preferences between institutions can be assessed, using the…

Developing comparative criminology and the case of China: an introduction.

PubMed

Liu, Jianhong

2007-02-01

Although comparative criminology has made significant development during the past decade or so, systematic empirical research has only developed along a few topics. Comparative criminology has never occupied a central position in criminology. This article analyzes the major theoretical and methodological impediments in the development of comparative criminology. It stresses a need to shift methodology from a conventional primary approach that uses the nation as the unit of analysis to an in-depth case study method as a primary methodological approach. The article maintains that case study method can overcome the limitation of its descriptive tradition and become a promising methodological approach for comparative criminology.

Physical and Chemical Data from Eolian Sediment Collected Along a Transect from the Mojave Desert to the Colorado Plateau

USGS Publications Warehouse

Goldstein, Harland L.; Reynolds, Richard L.; Reheis, Marith C.; Yount, James C.; Lamothe, Paul J.

2007-01-01

This report presents data and describes the methodology for magnetic, geochemical, and textural measurements of sediment and bedrock samples collected along a transect across the Southwestern United States (fig. 1). The results presented here support a study that examines compositional variations of mineral dust deposited during the past few centuries in isolated natural traps spanning a region from the Mojave Desert of southern California to the central Colorado Plateau (Goldstein and others, in press; fig. 1). In particular, the study addresses the spatial and temporal variations in dust composition in the context of landscape geochemistry over a large area of the southwestern United States.

U.S. Geological Survey assessment of reserve growth outside of the United States

USGS Publications Warehouse

Klett, Timothy R.; Cook, Troy A.; Charpentier, Ronald R.; Tennyson, Marilyn E.; Le, Phuong A.

2015-12-21

The U.S. Geological Survey estimated volumes of technically recoverable, conventional petroleum resources resulting from reserve growth for discovered fields outside the United States that have reported in-place oil and gas volumes of 500 million barrels of oil equivalent or greater. The mean volumes of reserve growth were estimated at 665 billion barrels of crude oil; 1,429 trillion cubic feet of natural gas; and 16 billion barrels of natural gas liquids. These volumes constitute a significant portion of the world’s oil and gas resources and represent the potential future growth of current global reserves over time based on better assessment methodology, new technologies, and greater understanding of reservoirs.

Intimate Partner Violence in the United States - 2010

MedlinePlus

... administration............................................................................. 9 Statistical testing and inference ................................................................... 9 Additional methodological information ..........................................................10 2. Prevalence and Frequency of Individual ...

Coal resources available for development; a methodology and pilot study

USGS Publications Warehouse

Eggleston, Jane R.; Carter, M. Devereux; Cobb, James C.

1990-01-01

Coal accounts for a major portion of our Nation's energy supply in projections for the future. A demonstrated reserve base of more than 475 billion short tons, as the Department of Energy currently estimates, indicates that, on the basis of today's rate of consumption, the United States has enough coal to meet projected energy needs for almost 200 years. However, the traditional procedures used for estimating the demonstrated reserve base do not account for many environmental and technological restrictions placed on coal mining. A new methodology has been developed to determine the quantity of coal that might actually be available for mining under current and foreseeable conditions. This methodology is unique in its approach, because it applies restrictions to the coal resource before it is mined. Previous methodologies incorporated restrictions into the recovery factor (a percentage), which was then globally applied to the reserve (minable coal) tonnage to derive a recoverable coal tonnage. None of the previous methodologies define the restrictions and their area and amount of impact specifically. Because these restrictions and their impacts are defined in this new methodology, it is possible to achieve more accurate and specific assessments of available resources. This methodology has been tested in a cooperative project between the U.S. Geological Survey and the Kentucky Geological Survey on the Matewan 7.5-minute quadrangle in eastern Kentucky. Pertinent geologic, mining, land-use, and technological data were collected, assimilated, and plotted. The National Coal Resources Data System was used as the repository for data, and its geographic information system software was applied to these data to eliminate restricted coal and quantify that which is available for mining. This methodology does not consider recovery factors or the economic factors that would be considered by a company before mining. Results of the pilot study indicate that, of the estimated original 986.5 million short tons of coal resources in Kentucky's Matewan quadrangle, 13 percent has been mined, 2 percent is restricted by land-use considerations, and 23 percent is restricted by technological considerations. This leaves an estimated 62 percent of the original resource, or approximately 612 million short tons available for mining. However, only 44 percent of this available coal (266 million short tons) will meet current Environmental Protection Agency new-source performance standards for sulfur emissions from electric generating plants in the United States. In addition, coal tonnage lost during mining and cleaning would further reduce the amount of coal actually arriving at the market.

Methodology for energy strategy to prescreen the feasibility of Ground Source Heat Pump systems in residential and commercial buildings in the United States

DOE PAGES

Cho, Soolyeon; Ray, Saurabh; Im, Piljae; ...

2017-09-21

Geothermal resources have potential to reduce dependence on fossil fuels. The viability of geothermal heat pumps or ground source heat pumps (GSHPs) is significant as a potential alternative energy source with substantial savings potential. While the prospect of these systems is promising for energy efficiency, careful feasibility analysis is required before implementation. Here, this paper presents the results of evaluation of the application feasibility for GSHPs in buildings across seven climate zones in three United States regions. A comprehensive methodology is developed to measure the integrated feasibility of GSHPs using compiled data for energy use intensity, energy cost and designmore » parameters. Four different feasibility metrics are utilized: ground temperature, outdoor weather condition, energy savings potential, and cost benefits. For each metric, a corresponding feasibility score system is developed. The defined integrated feasibility score classifies the locations into five different feasibility levels ranging from Fair (0–20), Moderate (21–40), Good (41–60), High (61–80), and Very High (81–100). Conclusions show the GSHP feasibility level is High for 3 sites, Good for 8 sites and Moderate for 4 sites. Through the methodology, it is possible to develop a practical energy strategy for more economic and sustainable GSHP systems at an early design stage in the various viewpoints of geometries, climate conditions, operational factors, and energy costs.« less

Methodology for energy strategy to prescreen the feasibility of Ground Source Heat Pump systems in residential and commercial buildings in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cho, Soolyeon; Ray, Saurabh; Im, Piljae

Geothermal resources have potential to reduce dependence on fossil fuels. The viability of geothermal heat pumps or ground source heat pumps (GSHPs) is significant as a potential alternative energy source with substantial savings potential. While the prospect of these systems is promising for energy efficiency, careful feasibility analysis is required before implementation. Here, this paper presents the results of evaluation of the application feasibility for GSHPs in buildings across seven climate zones in three United States regions. A comprehensive methodology is developed to measure the integrated feasibility of GSHPs using compiled data for energy use intensity, energy cost and designmore » parameters. Four different feasibility metrics are utilized: ground temperature, outdoor weather condition, energy savings potential, and cost benefits. For each metric, a corresponding feasibility score system is developed. The defined integrated feasibility score classifies the locations into five different feasibility levels ranging from Fair (0–20), Moderate (21–40), Good (41–60), High (61–80), and Very High (81–100). Conclusions show the GSHP feasibility level is High for 3 sites, Good for 8 sites and Moderate for 4 sites. Through the methodology, it is possible to develop a practical energy strategy for more economic and sustainable GSHP systems at an early design stage in the various viewpoints of geometries, climate conditions, operational factors, and energy costs.« less

METHODOLOGY TO ESTABLISH WATER QUALITY PARAMETERS ON THE U.S. COUNTY LEVEL

EPA Science Inventory

The United States Geological Survey (USGS) collects water quality data at approximately 1.5 million sites in the United States (US) for both surface water and ground water locations. These data are provided publicly through the National Water Information System (NWIS) web interfa...

78 FR 36582 - Agency Information Collection Activities; Proposed Collection; Comments Requested; Extension With...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

... Richard L. Nagy, Unit Chief, Domestic Strategic Intelligence Unit, Office of Intelligence, Warning, Plans...' estimate of the burden of the proposed collection of information, including the validity of the methodology... number: None. Component: Intelligence Division, Drug Enforcement Administration, U.S. Department of...

HETEROTROPHIC PLATE COUNT (HPC) METHODOLOGY IN THE UNITED STATES

EPA Science Inventory

ABSTRACT

In the United States (U.S.), the history of bacterial plate counting methods used for water can be traced largely through Standard Methods for the Examination of Water and Wastewater (Standard Methods). The bacterial count method has evolved from the original St...

Avian fatalities at wind energy facilities in North America: A comparison of recent approaches

USGS Publications Warehouse

Johnson, Douglas H.; Loss, Scott R.; Smallwood, K. Shawn; Erickson, Wallace P.

2016-01-01

Three recent publications have estimated the number of birds killed each year by wind energy facilities at 2012 build-out levels in the United States. The 3 publications differ in scope, methodology, and resulting estimates. We compare and contrast characteristics of the approaches used in the publications. In addition, we describe decisions made in obtaining the estimates that were produced. Despite variation in the 3 approaches, resulting estimates were reasonably similar; about a quarter- to a half-million birds are killed per year by colliding with wind turbines.

Assessment of methodological quality of economic evaluations in belgian drug reimbursement applications.

PubMed

Simoens, Steven

2013-01-01

This paper aims to assess the methodological quality of economic evaluations included in Belgian reimbursement applications for Class 1 drugs. For 19 reimbursement applications submitted during 2011 and Spring 2012, a descriptive analysis assessed the methodological quality of the economic evaluation, evaluated the assessment of that economic evaluation by the Drug Reimbursement Committee and the response to that assessment by the company. Compliance with methodological guidelines issued by the Belgian Healthcare Knowledge Centre was assessed using a detailed checklist of 23 methodological items. The rate of compliance was calculated based on the number of economic evaluations for which the item was applicable. Economic evaluations tended to comply with guidelines regarding perspective, target population, subgroup analyses, comparator, use of comparative clinical data and final outcome measures, calculation of costs, incremental analysis, discounting and time horizon. However, more attention needs to be paid to the description of limitations of indirect comparisons, the choice of an appropriate analytic technique, the expression of unit costs in values for the current year, the estimation and valuation of outcomes, the presentation of results of sensitivity analyses, and testing the face validity of model inputs and outputs. Also, a large variation was observed in the scope and depth of the quality assessment by the Drug Reimbursement Committee. Although general guidelines exist, pharmaceutical companies and the Drug Reimbursement Committee would benefit from the existence of a more detailed checklist of methodological items that need to be reported in an economic evaluation.

Strategic Choice: United States Special Forces’ Comparative Advantage in Irregular Warfare

DTIC Science & Technology

2017-03-01

UNITED STATES SPECIAL FORCES’ COMPARATIVE ADVANTAGE IN IRREGULAR WARFARE by Steven F. Payne March 2017 Thesis Advisor: Hy S. Rothstein...REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE STRATEGIC CHOICE: UNITED STATES SPECIAL FORCES’ COMPARATIVE ADVANTAGE IN...methodology, this thesis concludes that U.S. Army Special Forces have a comparative advantage over conventional forces to provide the National Command

Historical review of and current progress in coal-resource estimation in the United States.

USGS Publications Warehouse

Wood, G.H.

1981-01-01

Nine estimates of US coal resources have been published in the past 71yr. Although many details of these estimates differ markedly, those for 1913, 1922, and 1974 are surprisingly similar. Some differences are due to increased data, others reflect changes in terminology, definitions, criteria, guidelines, and methodologies. Thus many early estimates are not particularly useful in modern resource assessments. Preliminary definitions that are being prepared in 1980 by the US Geological Survey are compared with those published in 1976 and currently in use. Anticipated results of the new definitions are: 1) to lessen existing confusion about estimation procedures; 2) to make such procedures easier and more precise; 3) to promote use of a commonly accepted terminology accompanied by standardized definitions, criteria, guidelines, and methodologies for estimating resources. -Author

What Is the Methodologic Quality of Human Therapy Studies in ISI Surgical Publications?

PubMed Central

Manterola, Carlos; Pineda, Viviana; Vial, Manuel; Losada, Héctor

2006-01-01

Objective: To determine the methodologic quality of therapy articles about humans published in ISI surgical journals, and to explore the association between methodologic quality, origin, and subject matter. Summary Background Data: It is supposed that ISI journals contain the best methodologic articles. Methods: This is a bibliometric study. All journals listed in the 2002 ISI under the subject heading of “Surgery” were included. A simple randomized sampling was conducted for selected journals (Annals of Surgery, The American Surgeon, Archives of Surgery, British Journal of Surgery, European Journal of Surgery, Journal of the American College of Surgeons, Surgery, and World Journal of Surgery). Published articles related to therapy on humans of the selected journals were reviewed and analyzed. All kinds of clinical designs were considered, excluding editorials, review articles, letters to the editor, and experimental studies. The variables considered were: place of origin, design, and the methodologic quality of articles, which was determined by applying a valid and reliable scale. The review was performed interchangeably and independently by 2 research teams. Descriptive and analytical statistics were used. Statistical significance was defined as P values less than 1%. Results: A total of 653 articles were studied. Studies came predominantly from the United States and Europe (43.6% and 36.8%, respectively). The subject areas most frequently found were digestive and hepatobiliopancreatic surgery (29.1% and 24.5%, respectively). Average and median methodologic quality scores of the entire series were 11.6 ± 4.9 points and 11 points, respectively. The association between methodologic quality and journals was determined. Also, the association between methodologic quality and origin was observed, but no association with subject area was verified. Conclusions: The methodologic quality of therapy articles published in the journals analyzed is low; however, statistical significance was determined between them. Association was observed between methodologic quality and origin, but not with subject matter. PMID:17060778

Perfecting patient flow in the surgical setting.

PubMed

Amato-Vealey, Elaine J; Fountain, Patricia; Coppola, Deborah

2012-07-01

Reduced surgical efficiency and productivity, delayed patient discharges, and prolonged use of hospital resources are the results of an OR that is unable to move patients to the postanesthesia care unit or other patient units. A primary reason for perioperative patient flow delay is the lack of hospital beds to accommodate surgical patients, which consequently causes backups of patients currently in the surgical suite. In one facility, implementing Six Sigma methodology helped to improve OR patient flow by identifying ways that frontline staff members could work more intelligently and more efficiently, and with less stress to streamline workflow and eliminate redundancy and waste in ways that did not necessitate reducing the number of employees. The results were improved employee morale, job satisfaction and safety, and an enhanced patient experience. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Thematic accuracy of the 1992 National Land-Cover Data for the eastern United States: Statistical methodology and regional results

USGS Publications Warehouse

Stehman, S.V.; Wickham, J.D.; Smith, J.H.; Yang, L.

2003-01-01

The accuracy of the 1992 National Land-Cover Data (NLCD) map is assessed via a probability sampling design incorporating three levels of stratification and two stages of selection. Agreement between the map and reference land-cover labels is defined as a match between the primary or alternate reference label determined for a sample pixel and a mode class of the mapped 3×3 block of pixels centered on the sample pixel. Results are reported for each of the four regions comprising the eastern United States for both Anderson Level I and II classifications. Overall accuracies for Levels I and II are 80% and 46% for New England, 82% and 62% for New York/New Jersey (NY/NJ), 70% and 43% for the Mid-Atlantic, and 83% and 66% for the Southeast.

1995 National Assessment of United States Oil and Gas Resources: Results, Methodology, and Supporting Data

USGS Publications Warehouse

Gautier, Donald L.; Dolton, Gordon L.; Takahashi, Kenneth I.; Varnes, Katharine L.

1996-01-01

This revised CD-ROM summarizes the results, released in 1995, of the 3-year study of the oil and gas resources of the onshore and state waters of the United States. Minor errors in the original DDS-30 (listed in DDS-35 and DDS-36) are corrected in this revised version and in the data files now released in DDS-35 and DDS-36. Estimates are made of technically recoverable oil, including measured (proved) reserves, future additions to reserves in existing fields, and undiscovered resources. Estimates are also made of the technically recoverable conventional resources of natural gas in measured reserves, in anticipated growth of reserves in existing fields, and in undiscovered resources. Additionally, an assessment is made of recoverable resources in continuous-type (largely unconventional) accumulations in sandstones, shales, chalks, and coal beds.

The trials methodological research agenda: results from a priority setting exercise

PubMed Central

2014-01-01

Background Research into the methods used in the design, conduct, analysis, and reporting of clinical trials is essential to ensure that effective methods are available and that clinical decisions made using results from trials are based on the best available evidence, which is reliable and robust. Methods An on-line Delphi survey of 48 UK Clinical Research Collaboration registered Clinical Trials Units (CTUs) was undertaken. During round one, CTU Directors were asked to identify important topics that require methodological research. During round two, their opinion about the level of importance of each topic was recorded, and during round three, they were asked to review the group’s average opinion and revise their previous opinion if appropriate. Direct reminders were sent to maximise the number of responses at each round. Results are summarised using descriptive methods. Results Forty one (85%) CTU Directors responded to at least one round of the Delphi process: 25 (52%) responded in round one, 32 (67%) responded in round two, 24 (50%) responded in round three. There were only 12 (25%) who responded to all three rounds and 18 (38%) who responded to both rounds two and three. Consensus was achieved amongst CTU Directors that the top three priorities for trials methodological research were ‘Research into methods to boost recruitment in trials’ (considered the highest priority), ‘Methods to minimise attrition’ and ‘Choosing appropriate outcomes to measure’. Fifty other topics were included in the list of priorities and consensus was reached that two topics, ‘Radiotherapy study designs’ and ‘Low carbon trials’, were not priorities. Conclusions This priority setting exercise has identified the research topics felt to be most important to the key stakeholder group of Directors of UKCRC registered CTUs. The use of robust methodology to identify these priorities will help ensure that this work informs the trials methodological research agenda, with a focus on topics that will have most impact and relevance. PMID:24456928

Advances in the identification of adulterated cereals and cereal products

USDA-ARS?s Scientific Manuscript database

This book chapter addresses the most common occurrences of adulteration in the cereal grains, the regulations in place by countries (such as the United States, United Kingdom, Italy, India, and the European Union), and the methodologies by which detection and quantification of the contaminant are ma...

How American History Textbooks View the Caribbean.

ERIC Educational Resources Information Center

Shapiro, Victor W.

This paper examines: (1) the extent to which recently published textbooks used in United States history survey courses reflect a revised view of the historical relationship between the Caribbean region and the United States; and (2) whether recent shifts in research emphases and methodological expansions in the field of American history have…

Evaluating Alternative Methodologies for Capturing As-Built Building Information Models (BIM) For Existing Facilities

DTIC Science & Technology

2010-08-01

Jeffery P. Holland was the Director. ERDC/CERL CR-10-1 iv Unit Conversion Factors Multiply By To Obtain British thermal units (International Table...360 Panoramic Optic™ is a specially designed lens attachment, with an exclusive optical reflector, which captures an entire 360 degree panorama

Crash problem definition and safety benefits methodology for stability control for single-unit medium and heavy trucks and large-platform buses

DOT National Transportation Integrated Search

2009-10-01

This report presents the findings of a comprehensive engineering analysis of electronic stability control (ESC) and roll stability control (RSC) systems for single-unit medium and heavy trucks and large-platform buses. This report details the applica...

Demography and Environment Earth: Teacher Edition.

ERIC Educational Resources Information Center

McCrea, Lester C.; And Others

This document is one in a series of instructional materials on population education developed for the Baltimore public schools. The unit, designed for elementary grades 5 and 6, focuses on demography and human factors and consequences. The first part of the resource unit presents basic information, methodology, and understandings of demography and…

Optimizing management of the condensing heat and cooling of gases compression in oxy block using of a genetic algorithm

NASA Astrophysics Data System (ADS)

Brzęczek, Mateusz; Bartela, Łukasz

2013-12-01

This paper presents the parameters of the reference oxy combustion block operating with supercritical steam parameters, equipped with an air separation unit and a carbon dioxide capture and compression installation. The possibility to recover the heat in the analyzed power plant is discussed. The decision variables and the thermodynamic functions for the optimization algorithm were identified. The principles of operation of genetic algorithm and methodology of conducted calculations are presented. The sensitivity analysis was performed for the best solutions to determine the effects of the selected variables on the power and efficiency of the unit. Optimization of the heat recovery from the air separation unit, flue gas condition and CO2 capture and compression installation using genetic algorithm was designed to replace the low-pressure section of the regenerative water heaters of steam cycle in analyzed unit. The result was to increase the power and efficiency of the entire power plant.

Effect of a Quality Improvement Program to Improve Guideline Adherence and Attainment of Clinical Standards in Dialysis Care: Report of Outcomes in Year 1.

PubMed

Youssouf, Sajeda; Nache, Azri; Wijesekara, Chandrakumaran; Middleton, Rachel J; Lewis, David; Shurrab, Aladdin E; O'Riordan, Edmond; Lappin, Lesley P; O'Donoghue, Donal; Kalra, Philip A; Hegarty, Janet

2017-01-01

Best practice in dialysis is synthesised in clear international guidelines. However, a large gap remains between the international guidelines and the actual delivery of care. In this paper, we report outcomes for the first year of a multifaceted dialysis improvement programme in our network. One year collaborative involving 3 haemodialysis units and a peritoneal dialysis (PD) programme involving 299 dialysis patients. Each unit addressed a different indicator (unit A - catheter-related bloodstream infection [CRBSI], unit B - pre-dialysis blood pressure [BP], unit C - dialysis dose, unit D - anaemia) with a shared aim to match the top 10% in the UK. Tailored multifaceted approaches include a modified collaborative methodology with an aim, framework, driver diagram, learning sessions, facilitated meetings, plan-do-study-act cycles and continuous measurement. Analysis of outcomes, costings, erythropoietin stimulating agent and iron use, and safety culture attributes. Unit A reduced CRBSI from 2.65 to 0.5 per 1,000 catheter days (p = 0.02). Unit B improved attainment of target BP from 37.5 to 67.2% (p = 0.003). Unit C improved attainment of target urea reduction ratio from 75.8 to 91.4% (p = 0.04). PD unit D improved attainment of target haemoglobin from 45.5 to 62.7% (p = 0.01), with no significant change in the indicators in a non-intervention unit. Safety culture attributes improved. Costs associated with admission for fluid overload and infection, erythropoietin, iron and thrombokinase use decreased 36% (£415,620-£264,143). Units that took part in this collaborative improved guideline adherence compared both to their own pre-intervention performance and a non-intervention unit. Such multifaceted interventions are a useful methodology to improve dialysis care. © 2017 S. Karger AG, Basel.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brigantic, Robert T.; Papatyi, Anthony F.; Perkins, Casey J.

This report summarizes a study and corresponding model development conducted in support of the United States Pacific Command (USPACOM) as part of the Federal Energy Management Program (FEMP) American Reinvestment and Recovery Act (ARRA). This research was aimed at developing a mathematical programming framework and accompanying optimization methodology in order to simultaneously evaluate energy efficiency (EE) and renewable energy (RE) opportunities. Once developed, this research then demonstrated this methodology at a USPACOM installation - Camp H.M. Smith, Hawaii. We believe this is the first time such an integrated, joint EE and RE optimization methodology has been constructed and demonstrated.

Exploring the possibility of modeling a genetic counseling guideline using agile methodology.

PubMed

Choi, Jeeyae

2013-01-01

Increased demand of genetic counseling services heightened the necessity of a computerized genetic counseling decision support system. In order to develop an effective and efficient computerized system, modeling of genetic counseling guideline is an essential step. Throughout this pilot study, Agile methodology with United Modeling Language (UML) was utilized to model a guideline. 13 tasks and 14 associated elements were extracted. Successfully constructed conceptual class and activity diagrams revealed that Agile methodology with UML was a suitable tool to modeling a genetic counseling guideline.

A Comparison of Methodological Approaches for Evaluating the Quality of Basic Skills Programs. AIR Forum 1982 Paper.

ERIC Educational Resources Information Center

Dumont, Richard G.; And Others

A multiple-indicator and multiple-design approach for evaluating the quality of basic skills programs in reading, writing, and mathematics that has been implemented within a statewide system of higher education in the southeastern United States was assessed. Several of the evaluation methodologies are compared in order to determine whether results…

Identifying potential heirs properties in the Southeastern United States: a new GIS methodology utilizing mass appraisal data

Treesearch

Scott Pippin; Shana Jones; Cassandra Johnson Gaither

2017-01-01

This report presents a methodology for identifying land parcels that have an increased probability of being heirs property. Heirs property is inherited land passed to successive generations intestate, without clear title, typically to family members. This land ownership type is widespread among rural, African-American populations and is also thought to be pervasive in...

Developing a methodology to predict oak wilt distribution using classification tree analysis

Treesearch

Marla C. Downing; Vernon L. Thomas; Robin M. Reich

2006-01-01

Oak wilt (Ceratocystis fagacearum), a fungal disease that causes some species of oak trees to wilt and die rapidly, is a threat to oak forested resources in 22 states in the United States. We developed a methodology for predicting the Potential Distribution of Oak Wilt (PDOW) using Anoka County, Minnesota as our study area. The PDOW utilizes GIS; the...

The Measure of a Nation: The USDA and the Rise of Survey Methodology

ERIC Educational Resources Information Center

Mahoney, Kevin T.; Baker, David B.

2007-01-01

Survey research has played a major role in American social science. An outgrowth of efforts by the United States Department of Agriculture in the 1930s, the Division of Program Surveys (DPS) played an important role in the development of survey methodology. The DPS was headed by the ambitious and entrepreneurial Rensis Likert, populated by young…

"A Day in the Life": Advancing a Methodology for the Cultural Study of Development and Learning in Early Childhood

ERIC Educational Resources Information Center

Gillen, Julia; Cameron, Catherine Ann; Tapanya, Sombat; Pinto, Giuliana; Hancock, Roger; Young, Susan; Gamannossi, Beatrice Accorti

2007-01-01

This paper explores the methodology of an ecological investigation of aspects of culture in the interactional construction of early childhood in diverse global communities: Peru, Italy, Canada, Thailand, and the United Kingdom. Regarding culture as a dynamic dimension of the child's socialisation, the approach taken was to film a "day in the…

Alcohol- and Drug-Involved Driving in the United States: Methodology for the 2007 National Roadside Survey

ERIC Educational Resources Information Center

Lacey, John H.; Kelley-Baker, Tara; Voas, Robert B.; Romano, Eduardo; Furr-Holden, C. Debra; Torres, Pedro; Berning, Amy

2011-01-01

This article describes the methodology used in the 2007 U.S. National Roadside Survey to estimate the prevalence of alcohol- and drug-impaired driving and alcohol- and drug-involved driving. This study involved randomly stopping drivers at 300 locations across the 48 continental U.S. states at sites selected through a stratified random sampling…

Working on a Standard Joint Unit: A pilot test.

PubMed

Casajuana, Cristina; López-Pelayo, Hugo; Mercedes Balcells, María; Miquel, Laia; Teixidó, Lídia; Colom, Joan; Gual, Antoni

2017-09-29

Assessing cannabis consumption remains complex due to no reliable registration systems. We tested the likelihood of establishing a Standard Joint Unit (SJU) which considers the main cannabinoids with implication on health through a naturalistic approach.  Methodology. Pilot study with current cannabis users of four areas of Barcelona: universities, nightclubs, out-patient mental health service, and cannabis associations. We designed and administered a questionnaire on cannabis use-patterns and determined the willingness to donate a joint for analysis. Descriptive statistics were used to analyze the data. Forty volunteers answered the questionnaire (response rate 95%); most of them were men (72.5%) and young adults (median age 24.5 years; IQR 8.75 years) who consume daily or nearly daily (70%). Most participants consume marihuana (85%) and roll their joints with a median of 0.25 gr of marihuana. Two out of three (67.5%) stated they were willing to donate a joint. Obtaining an SJU with the planned methodology has proved to be feasible. Pre-testing resulted in an improvement of the questionnaire and retribution to incentivize donations. Establishing an SJU is essential to improve our knowledge on cannabis-related outcomes.

Methodology and Implications of Maximum Paleodischarge Estimates for

USGS Publications Warehouse

Channels, M.; Pruess, J.; Wohl, E.E.; Jarrett, R.D.

1998-01-01

Historical and geologic records may be used to enhance magnitude estimates for extreme floods along mountain channels, as demonstrated in this study from the San Juan Mountains of Colorado. Historical photographs and local newspaper accounts from the October 1911 flood indicate the likely extent of flooding and damage. A checklist designed to organize and numerically score evidence of flooding was used in 15 field reconnaissance surveys in the upper Animas River valley of southwestern Colorado. Step-backwater flow modeling estimated the discharges necessary to create longitudinal flood bars observed at 6 additional field sites. According to these analyses, maximum unit discharge peaks at approximately 1.3 m3 s~' km"2 around 2200 m elevation, with decreased unit discharges at both higher and lower elevations. These results (1) are consistent with Jarrett's (1987, 1990, 1993) maximum 2300-m elevation limit for flash-flooding in the Colorado Rocky Mountains, and (2) suggest that current Probable Maximum Flood (PMF) estimates based on a 24-h rainfall of 30 cm at elevations above 2700 m are unrealistically large. The methodology used for this study should be readily applicable to other mountain regions where systematic streamflow records are of short duration or nonexistent. ?? 1998 Regents of the University of Colorado.

Applying Critical Discourse Analysis in Health Policy Research: Case Studies in Regional, Organizational, and Global Health.

PubMed

Evans-Agnew, Robin A; Johnson, Susan; Liu, Fuqin; Boutain, Doris M

2016-08-01

Critical discourse analysis (CDA) is a promising methodology for policy research in nursing. As a critical theoretical methodology, researchers use CDA to analyze social practices and language use in policies to examine whether such policies may promote or impede social transformation. Despite the widespread use of CDA in other disciplines such as education and sociology, nursing policy research employing CDA methodology is sparse. To advance CDA use in nursing science, it is important to outline the overall research strategies and describe the steps of CDA in policy research. This article describes, using exemplar case studies, how nursing and health policy researchers can employ CDA as a methodology. Three case studies are provided to discuss the application of CDA research methodologies in nursing policy research: (a) implementation of preconception care policies in the Zhejiang province of China, (b) formation and enactment of statewide asthma policy in Washington state of the United States, and (c) organizational implementation of employee antibullying policies in hospital systems in the Pacific Northwest of the United States. Each exemplar details how CDA guided the examination of policy within specific contexts and social practices. The variations of the CDA approaches in the three exemplars demonstrated the flexibilities and potentials for conducting policy research grounded in CDA. CDA provides novel insights for nurse researchers examining health policy formation, enactment, and implementation. © The Author(s) 2016.

Measuring the impact of methodological research: a framework and methods to identify evidence of impact.

PubMed

Brueton, Valerie C; Vale, Claire L; Choodari-Oskooei, Babak; Jinks, Rachel; Tierney, Jayne F

2014-11-27

Providing evidence of impact highlights the benefits of medical research to society. Such evidence is increasingly requested by research funders and commonly relies on citation analysis. However, other indicators may be more informative. Although frameworks to demonstrate the impact of clinical research have been reported, no complementary framework exists for methodological research. Therefore, we assessed the impact of methodological research projects conducted or completed between 2009 and 2012 at the UK Medical Research Council Clinical Trials Unit Hub for Trials Methodology Research Hub, with a view to developing an appropriate framework. Various approaches to the collection of data on research impact were employed. Citation rates were obtained using Web of Science (http://www.webofknowledge.com/) and analyzed descriptively. Semistructured interviews were conducted to obtain information on the rates of different types of research output that indicated impact for each project. Results were then pooled across all projects. Finally, email queries pertaining to methodology projects were collected retrospectively and their content analyzed. Simple citation analysis established the citation rates per year since publication for 74 methodological publications; however, further detailed analysis revealed more about the potential influence of these citations. Interviews that spanned 20 individual research projects demonstrated a variety of types of impact not otherwise collated, for example, applications and further developments of the research; release of software and provision of guidance materials to facilitate uptake; formation of new collaborations and broad dissemination. Finally, 194 email queries relating to 6 methodological projects were received from 170 individuals across 23 countries. They provided further evidence that the methodologies were impacting on research and research practice, both nationally and internationally. We have used the information gathered in this study to adapt an existing framework for impact of clinical research for use in methodological research. Gathering evidence on research impact of methodological research from a variety of sources has enabled us to obtain multiple indicators and thus to demonstrate broad impacts of methodological research. The adapted framework developed can be applied to future methodological research and thus provides a tool for methodologists to better assess and report research impacts.

Active-Reserve Force Cost Model

DTIC Science & Technology

2015-01-01

structure to be maintained for a given level of expenditure. We have developed this methodology and set of associated computer-based tools to...rotational, and deployed units or systems • Attain acceptable steady state operational or presence levels , as measured by the number of units a...at the community level . By community, we mean the set of units of a given type: mission, platform, or capability. We do this because AC-RC force-mix

Self-esteem and academic achievement: a comparative study of adolescent students in England and the United States

PubMed Central

Booth, Margaret Zoller; Gerard, Jean M.

2012-01-01

Utilizing mixed methodology, this paper investigates the relationship between self-esteem and academic achievement for young adolescents within two Western cultural contexts: the United States and England. Quantitative and qualitative data from 86 North American and 86 British adolescents were utilized to examine the links between self-esteem and academic achievement from the beginning to the end of their academic year during their 11th–12th year of age. For both samples, quantitative results demonstrated that fall self-esteem was related to multiple indicators of later year academic achievement. While country differences emerge by the end of the year, math appears to have a consistent relationship with self-esteem in both country contexts. Qualitative analyses found some support for British students’ self-perceptions as more accurately reflecting their academic experience than the students from the United States. PMID:24068853

ICC Type II large-format FPA detector assemblies

NASA Astrophysics Data System (ADS)

Clynne, Thomas H.; Powers, Thomas P.

1997-08-01

ICC presents a new addition to their integrated detector assembly product line with the announcement of their type II large format staring class FPA units. A result of internally funded research and development, the ICC type II detector assembly can accommodate all existing large format staring class PtSi, InSb and MCT focal planes, up to 640 by 480. Proprietary methodologies completely eliminate all FPA stresses to allow for maximum FPA survivability. Standard optical and cryocooler interfaces allow for the use of BEI, AEG, TI SADA Hughes/Magnavox and Joule Thompson coolers. This unit has been qualified to the current SADA II thermal environmental specifications and was tailored around ICC's worldwide industry standard type IV product. Assembled in a real world flexible manufacturing environment, this unit features a wide degree of adaptability and can be easily modified to a user's specifications via standard options and add-ons that include optical interfaces, electrical interfaces and window/filter material selections.

Estimating a Service-Life Distribution Based on Production Counts and a Failure Database

DOE PAGES

Ryan, Kenneth J.; Hamada, Michael Scott; Vardeman, Stephen B.

2017-04-01

A manufacturer wanted to compare the service-life distributions of two similar products. These concern product lifetimes after installation (not manufacture). For each product, there were available production counts and an imperfect database providing information on failing units. In the real case, these units were expensive repairable units warrantied against repairs. Failure (of interest here) was relatively rare and driven by a different mode/mechanism than ordinary repair events (not of interest here). Approach: Data models for the service life based on a standard parametric lifetime distribution and a related limited failure population were developed. These models were used to develop expressionsmore » for the likelihood of the available data that properly accounts for information missing in the failure database. Results: A Bayesian approach was employed to obtain estimates of model parameters (with associated uncertainty) in order to investigate characteristics of the service-life distribution. Custom software was developed and is included as Supplemental Material to this case study. One part of a responsible approach to the original case was a simulation experiment used to validate the correctness of the software and the behavior of the statistical methodology before using its results in the application, and an example of such an experiment is included here. Because of confidentiality issues that prevent use of the original data, simulated data with characteristics like the manufacturer’s proprietary data are used to illustrate some aspects of our real analyses. Lastly, we also note that, although this case focuses on rare and complete product failure, the statistical methodology provided is directly applicable to more standard warranty data problems involving typically much larger warranty databases where entries are warranty claims (often for repairs) rather than reports of complete failures.« less

Estimating a Service-Life Distribution Based on Production Counts and a Failure Database

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan, Kenneth J.; Hamada, Michael Scott; Vardeman, Stephen B.

A manufacturer wanted to compare the service-life distributions of two similar products. These concern product lifetimes after installation (not manufacture). For each product, there were available production counts and an imperfect database providing information on failing units. In the real case, these units were expensive repairable units warrantied against repairs. Failure (of interest here) was relatively rare and driven by a different mode/mechanism than ordinary repair events (not of interest here). Approach: Data models for the service life based on a standard parametric lifetime distribution and a related limited failure population were developed. These models were used to develop expressionsmore » for the likelihood of the available data that properly accounts for information missing in the failure database. Results: A Bayesian approach was employed to obtain estimates of model parameters (with associated uncertainty) in order to investigate characteristics of the service-life distribution. Custom software was developed and is included as Supplemental Material to this case study. One part of a responsible approach to the original case was a simulation experiment used to validate the correctness of the software and the behavior of the statistical methodology before using its results in the application, and an example of such an experiment is included here. Because of confidentiality issues that prevent use of the original data, simulated data with characteristics like the manufacturer’s proprietary data are used to illustrate some aspects of our real analyses. Lastly, we also note that, although this case focuses on rare and complete product failure, the statistical methodology provided is directly applicable to more standard warranty data problems involving typically much larger warranty databases where entries are warranty claims (often for repairs) rather than reports of complete failures.« less

Estimating hydraulic parameters of a heterogeneous aquitard using long-term multi-extensometer and groundwater level data

NASA Astrophysics Data System (ADS)

Zhuang, Chao; Zhou, Zhifang; Illman, Walter A.; Guo, Qiaona; Wang, Jinguo

2017-09-01

The classical aquitard-drainage model COMPAC has been modified to simulate the compaction process of a heterogeneous aquitard consisting of multiple sub-units (Multi-COMPAC). By coupling Multi-COMPAC with the parameter estimation code PEST++, the vertical hydraulic conductivity ( K v) and elastic ( S ske) and inelastic ( S skp) skeletal specific-storage values of each sub-unit can be estimated using observed long-term multi-extensometer and groundwater level data. The approach was first tested through a synthetic case with known parameters. Results of the synthetic case revealed that it was possible to accurately estimate the three parameters for each sub-unit. Next, the methodology was applied to a field site located in Changzhou city, China. Based on the detailed stratigraphic information and extensometer data, the aquitard of interest was subdivided into three sub-units. Parameters K v, S ske and S skp of each sub-unit were estimated simultaneously and then were compared with laboratory results and with bulk values and geologic data from previous studies, demonstrating the reliability of parameter estimates. Estimated S skp values ranged within the magnitude of 10-4 m-1, while K v ranged over 10-10-10-8 m/s, suggesting moderately high heterogeneity of the aquitard. However, the elastic deformation of the third sub-unit, consisting of soft plastic silty clay, is masked by delayed drainage, and the inverse procedure leads to large uncertainty in the S ske estimate for this sub-unit.

Developing a User Oriented Design Methodology for Learning Activities Using Boundary Objects

ERIC Educational Resources Information Center

Fragou, ?lga; Kameas, Achilles

2013-01-01

International Standards in High and Open and Distance Education are used for developing Open Educational Resources (OERs). Current issues in e-learning community are the specification of learning chunks and the definition of describing designs for different units of learning (activities, units, courses) in a generic though expandable format.…

Women Chief Housing Officers at State Universities in the Northwest United States

ERIC Educational Resources Information Center

Hyatt, Jennifer Leigh

2016-01-01

This qualitative study explored the experiences of women chief housing officers (CHOs) at state universities within the northwest region of the United States. The study used narrative inquiry methodology with a thematic analysis approach to investigate how seven female CHOs experience and make meaning of their professional career progression and…

A Methodology for Building Faculty Support for the United Nations Principles for Responsible Management Education

ERIC Educational Resources Information Center

Maloni, Michael J.; Smith, Shane D.; Napshin, Stuart

2012-01-01

Evidence from extant literature indicates that faculty support is a critical driver for implementing the United Nations Principles for Responsible Management Education (PRME), particularly for schools pursuing an advanced, cross-disciplinary level of sustainability integration. However, there is limited existing research offering insight into how…

Entrepreneurial Orientation of Community College Workforce Divisions and the Impact of Organizational Structure: A Grounded Theory Study

ERIC Educational Resources Information Center

Schiefen, Kathleen M.

2010-01-01

This research focused on how organizational structure of community colleges influenced the entrepreneurial orientation of deans, directors, vice presidents, and vice chancellors of workforce units. Using grounded theory methodology, the researcher identified three emergent theories applicable to both integrated and separate workforce units. These…

Geologic framework for the national assessment of carbon dioxide storage resources: Greater Green River Basin, Wyoming, Colorado, and Utah, and Wyoming-Idaho-Utah Thrust Belt: Chapter E in Geologic framework for the national assessment of carbon dioxide storage resources

USGS Publications Warehouse

Buursink, Marc L.; Slucher, Ernie R.; Brennan, Sean T.; Doolan, Colin A.; Drake II, Ronald M.; Merrill, Matthew D.; Warwick, Peter D.; Blondes, Madalyn S.; Freeman, P.A.; Cahan, Steven M.; DeVera, Christina A.; Lohr, Celeste D.

2014-01-01

The 2007 Energy Independence and Security Act (Public Law 110–140) directs the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO2). The methodology used by the USGS for the national CO2 assessment follows up on previous USGS work. The methodology is non-economic and intended to be used at regional to subbasinal scales. This report identifies and contains geologic descriptions of 14 storage assessment units (SAUs) in Ordovician to Upper Cretaceous sedimentary rocks within the Greater Green River Basin (GGRB) of Wyoming, Colorado, and Utah, and eight SAUs in Ordovician to Upper Cretaceous sedimentary rocks within the Wyoming-Idaho-Utah Thrust Belt (WIUTB). The GGRB and WIUTB are contiguous with nearly identical geologic units; however, the GGRB is larger in size, whereas the WIUTB is more structurally complex. This report focuses on the characteristics, specified in the methodology, that influence the potential CO2 storage resource in the SAUs. Specific descriptions of the SAU boundaries, as well as their sealing and reservoir units, are included. Properties for each SAU, such as depth to top, gross thickness, porosity, permeability, groundwater quality, and structural reservoir traps, are typically provided to illustrate geologic factors critical to the assessment. This geologic information was employed, as specified in the USGS methodology, to calculate a probabilistic distribution of potential storage resources in each SAU. Figures in this report show SAU boundaries and cell maps of well penetrations through sealing units into the top of the storage formations. The cell maps show the number of penetrating wells within one square mile and are derived from interpretations of variably attributed well data and a digital compilation that is known not to include all drilling.

Estimates of low-level waste volumes and classifications at 2-Unit 1100 MWe reference plants for decommissioning scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hauf, M.J.; Vance, J.N.; James, D.

1991-01-01

A number of nuclear utilities and industry organizations in the United States have evaluated the requirements for reactor decommissioning. These broad scope studies have addressed the major issues of technology, methodology, safety and costs of decommissioning and have produced substantial volumes of data to describe, in detail, the issues and impacts which result. The objective of this paper to provide CECo a reasonable basis for discussion low-level waste burial volumes for the most likely decommissioning options and to show how various decontamination and VR technologies can be applied to provide additional reduction of the volumes required to be buried atmore » low-level waste burial grounds.« less

Full-wave simulation of a three-dimensional metamaterial prism

DOE PAGES

Basilio, Lorena I.; Langston, William L.; Warne, Larry K.; ...

2015-01-23

In our article, a negative-index metamaterial prism based on a composite unit cell containing a split-ring resonator and a z-dipole is designed and simulated. The design approach combines simulations of a single unit cell to identify the appropriate cell design (yielding the desired negative-index behavior) together with subcell modeling (which simplifies the mesh representation of the resonator geometry and allows for a larger number of resonator cells to be handled). Furthermore, to describe the methodology used in designing a n = -1 refractive index prism, our results include the effective-medium parameters, the far-field scattered patterns, and the near-zone field distributionsmore » corresponding to a normally incident plane-wave excitation of the prism.« less

Proceedings of the Annual Meeting of the Association for Education in Journalism and Mass Communication (86th, Kansas City, Missouri, July 30-August 2, 2003). Communication Theory & Methodology Division.

ERIC Educational Resources Information Center

2003

The Communication Theory & Methodology Division of the proceedings contains the following 14 papers: "Interaction As a Unit of Analysis for Interactive Media Research: A Conceptualization" (Joo-Hyun Lee and Hairong Li); "Towards a Network Approach of Human Action: Theoretical Concepts and Empirical Observations in Media…

77 FR 60040 - Wage Methodology for the Temporary Non-Agricultural Employment H-2B Program; Delay of Effective Date

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... Wage Rule revised the methodology by which the Department calculates the prevailing wages to be paid to... the Department calculates the prevailing wages to be paid to H-2B workers and United States (U.S... effect, it will supersede and make null the prevailing wage provisions at 20 CFR 655.10(b) of the...

Humanitarian Interventions: Western Imperialism or a Responsibility to Protect?--An Analysis of the Humanitarian Interventions in Darfur

ERIC Educational Resources Information Center

Damboeck, Johanna

2012-01-01

Purpose: The aim of this article is to provide an analysis of the features that have shaped the state's decision-making process in the United Nations, with regard to the humanitarian intervention in Darfur from 2003 onwards. Design/methodology/approach: The methodological approach to the study is a review of political statement papers grounded in…

A new calibration methodology for thorax and upper limbs motion capture in children using magneto and inertial sensors.

PubMed

Ricci, Luca; Formica, Domenico; Sparaci, Laura; Lasorsa, Francesca Romana; Taffoni, Fabrizio; Tamilia, Eleonora; Guglielmelli, Eugenio

2014-01-09

Recent advances in wearable sensor technologies for motion capture have produced devices, mainly based on magneto and inertial measurement units (M-IMU), that are now suitable for out-of-the-lab use with children. In fact, the reduced size, weight and the wireless connectivity meet the requirement of minimum obtrusivity and give scientists the possibility to analyze children's motion in daily life contexts. Typical use of magneto and inertial measurement units (M-IMU) motion capture systems is based on attaching a sensing unit to each body segment of interest. The correct use of this setup requires a specific calibration methodology that allows mapping measurements from the sensors' frames of reference into useful kinematic information in the human limbs' frames of reference. The present work addresses this specific issue, presenting a calibration protocol to capture the kinematics of the upper limbs and thorax in typically developing (TD) children. The proposed method allows the construction, on each body segment, of a meaningful system of coordinates that are representative of real physiological motions and that are referred to as functional frames (FFs). We will also present a novel cost function for the Levenberg-Marquardt algorithm, to retrieve the rotation matrices between each sensor frame (SF) and the corresponding FF. Reported results on a group of 40 children suggest that the method is repeatable and reliable, opening the way to the extensive use of this technology for out-of-the-lab motion capture in children.

Single point aerosol sampling: evaluation of mixing and probe performance in a nuclear stack.

PubMed

Rodgers, J C; Fairchild, C I; Wood, G O; Ortiz, C A; Muyshondt, A; McFarland, A R

1996-01-01

Alternative reference methodologies have been developed for sampling of radionuclides from stacks and ducts, which differ from the methods previously required by the United States Environmental Protection Agency. These alternative reference methodologies have recently been approved by the U.S. EPA for use in lieu of the current standard techniques. The standard EPA methods are prescriptive in selection of sampling locations and in design of sampling probes whereas the alternative reference methodologies are performance driven. Tests were conducted in a stack at Los Alamos National Laboratory to demonstrate the efficacy of some aspects of the alternative reference methodologies. Coefficients of variation of velocity, tracer gas, and aerosol particle profiles were determined at three sampling locations. Results showed that numerical criteria placed upon the coefficients of variation by the alternative reference methodologies were met at sampling stations located 9 and 14 stack diameters from the flow entrance, but not at a location that was 1.5 diameters downstream from the inlet. Experiments were conducted to characterize the transmission of 10 microns aerodynamic diameter liquid aerosol particles through three types of sampling probes. The transmission ratio (ratio of aerosol concentration at the probe exit plane to the concentration in the free stream) was 107% for a 113 L min-1 (4-cfm) anisokinetic shrouded probe, but only 20% for an isokinetic probe that follows the existing EPA standard requirements. A specially designed isokinetic probe showed a transmission ratio of 63%. The shrouded probe performance would conform to the alternative reference methodologies criteria; however, the isokinetic probes would not.

VERA Core Simulator Methodology for PWR Cycle Depletion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kochunas, Brendan; Collins, Benjamin S; Jabaay, Daniel

2015-01-01

This paper describes the methodology developed and implemented in MPACT for performing high-fidelity pressurized water reactor (PWR) multi-cycle core physics calculations. MPACT is being developed primarily for application within the Consortium for the Advanced Simulation of Light Water Reactors (CASL) as one of the main components of the VERA Core Simulator, the others being COBRA-TF and ORIGEN. The methods summarized in this paper include a methodology for performing resonance self-shielding and computing macroscopic cross sections, 2-D/1-D transport, nuclide depletion, thermal-hydraulic feedback, and other supporting methods. These methods represent a minimal set needed to simulate high-fidelity models of a realistic nuclearmore » reactor. Results demonstrating this are presented from the simulation of a realistic model of the first cycle of Watts Bar Unit 1. The simulation, which approximates the cycle operation, is observed to be within 50 ppm boron (ppmB) reactivity for all simulated points in the cycle and approximately 15 ppmB for a consistent statepoint. The verification and validation of the PWR cycle depletion capability in MPACT is the focus of two companion papers.« less

Using Lean Six Sigma Methodology to Improve a Mass Immunizations Process at the United States Naval Academy.

PubMed

Ha, Chrysanthy; McCoy, Donald A; Taylor, Christopher B; Kirk, Kayla D; Fry, Robert S; Modi, Jitendrakumar R

2016-06-01

Lean Six Sigma (LSS) is a process improvement methodology developed in the manufacturing industry to increase process efficiency while maintaining product quality. The efficacy of LSS application to the health care setting has not been adequately studied. This article presents a quality improvement project at the U.S. Naval Academy that uses LSS to improve the mass immunizations process for Midshipmen during in-processing. The process was standardized to give all vaccinations at one station instead of giving a different vaccination at each station. After project implementation, the average immunizations lead time decreased by 79% and staffing decreased by 10%. The process was shown to be in control with a capability index of 1.18 and performance index of 1.10, resulting in a defect rate of 0.04%. This project demonstrates that the LSS methodology can be applied successfully to the health care setting to make sustainable process improvements if used correctly and completely. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

GIS-based regionalized life cycle assessment: how big is small enough? Methodology and case study of electricity generation.

PubMed

Mutel, Christopher L; Pfister, Stephan; Hellweg, Stefanie

2012-01-17

We describe a new methodology for performing regionalized life cycle assessment and systematically choosing the spatial scale of regionalized impact assessment methods. We extend standard matrix-based calculations to include matrices that describe the mapping from inventory to impact assessment spatial supports. Uncertainty in inventory spatial data is modeled using a discrete spatial distribution function, which in a case study is derived from empirical data. The minimization of global spatial autocorrelation is used to choose the optimal spatial scale of impact assessment methods. We demonstrate these techniques on electricity production in the United States, using regionalized impact assessment methods for air emissions and freshwater consumption. Case study results show important differences between site-generic and regionalized calculations, and provide specific guidance for future improvements of inventory data sets and impact assessment methods.

Self-Calibration and Optimal Response in Intelligent Sensors Design Based on Artificial Neural Networks

PubMed Central

Rivera, José; Carrillo, Mariano; Chacón, Mario; Herrera, Gilberto; Bojorquez, Gilberto

2007-01-01

The development of smart sensors involves the design of reconfigurable systems capable of working with different input sensors. Reconfigurable systems ideally should spend the least possible amount of time in their calibration. An autocalibration algorithm for intelligent sensors should be able to fix major problems such as offset, variation of gain and lack of linearity, as accurately as possible. This paper describes a new autocalibration methodology for nonlinear intelligent sensors based on artificial neural networks, ANN. The methodology involves analysis of several network topologies and training algorithms. The proposed method was compared against the piecewise and polynomial linearization methods. Method comparison was achieved using different number of calibration points, and several nonlinear levels of the input signal. This paper also shows that the proposed method turned out to have a better overall accuracy than the other two methods. Besides, experimentation results and analysis of the complete study, the paper describes the implementation of the ANN in a microcontroller unit, MCU. In order to illustrate the method capability to build autocalibration and reconfigurable systems, a temperature measurement system was designed and tested. The proposed method is an improvement over the classic autocalibration methodologies, because it impacts on the design process of intelligent sensors, autocalibration methodologies and their associated factors, like time and cost.

Assessing Hydrologic Impacts of Future Land Cover Change ...

EPA Pesticide Factsheets

Long‐term land‐use and land cover change and their associated impacts pose critical challenges to sustaining vital hydrological ecosystem services for future generations. In this study, a methodology was developed on the San Pedro River Basin to characterize hydrologic impacts from future urban growth through time. This methodology was then expanded and utilized to characterize the changing hydrology on the South Platte River Basin. Future urban growth is represented by housingdensity maps generated in decadal intervals from 2010 to 2100, produced by the U.S. Environmental Protection Agency (EPA) Integrated Climate and Land‐Use Scenarios (ICLUS) project. ICLUS developed future housing density maps by adapting the Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) social, economic, and demographic storylines to the conterminous United States. To characterize hydrologic impacts from future growth, the housing density maps were reclassified to National Land Cover Database (NLCD) 2006 land cover classes and used to parameterize the Soil and Water Assessment Tool (SWAT) using the Automated Geospatial Watershed Assessment (AGWA) tool. The objectives of this project were to 1) develop and describe a methodology for adapting the ICLUS data for use in AGWA as anapproach to evaluate basin‐wide impacts of development on water‐quantity and ‐quality, 2) present initial results from the application of the methodology to

A systematic review of suicide prevention interventions targeting indigenous peoples in Australia, United States, Canada and New Zealand.

PubMed

Clifford, Anton C; Doran, Christopher M; Tsey, Komla

2013-05-13

Indigenous peoples of Australia, Canada, United States and New Zealand experience disproportionately high rates of suicide. As such, the methodological quality of evaluations of suicide prevention interventions targeting these Indigenous populations should be rigorously examined, in order to determine the extent to which they are effective for reducing rates of Indigenous suicide and suicidal behaviours. This systematic review aims to: 1) identify published evaluations of suicide prevention interventions targeting Indigenous peoples in Australia, Canada, United States and New Zealand; 2) critique their methodological quality; and 3) describe their main characteristics. A systematic search of 17 electronic databases and 13 websites for the period 1981-2012 (inclusive) was undertaken. The reference lists of reviews of suicide prevention interventions were hand-searched for additional relevant studies not identified by the electronic and web search. The methodological quality of evaluations of suicide prevention interventions was assessed using a standardised assessment tool. Nine evaluations of suicide prevention interventions were identified: five targeting Native Americans; three targeting Aboriginal Australians; and one First Nation Canadians. The main intervention strategies employed included: Community Prevention, Gatekeeper Training, and Education. Only three of the nine evaluations measured changes in rates of suicide or suicidal behaviour, all of which reported significant improvements. The methodological quality of evaluations was variable. Particular problems included weak study designs, reliance on self-report measures, highly variable consent and follow-up rates, and the absence of economic or cost analyses. There is an urgent need for an increase in the number of evaluations of preventive interventions targeting reductions in Indigenous suicide using methodologically rigorous study designs across geographically and culturally diverse Indigenous populations. Combining and tailoring best evidence and culturally-specific individual strategies into one coherent suicide prevention program for delivery to whole Indigenous communities and/or population groups at high risk of suicide offers considerable promise.

Lithological mapping using Landsat 8 OLI and Terra ASTER multispectral data in the Bas Drâa inlier, Moroccan Anti Atlas

NASA Astrophysics Data System (ADS)

Adiri, Zakaria; Harti, Abderrazak El; Jellouli, Amine; Maacha, Lhou; Bachaoui, El Mostafa

2016-01-01

Lithological mapping is a fundamental step in various mineral prospecting studies because it forms the basis of the interpretation and validation of retrieved results. Therefore, this study exploited the multispectral Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and Landsat 8 Operational Land Imager (OLI) data in order to map lithological units in the Bas Drâa inlier, at the Moroccan Anti Atlas. This task was completed by using principal component analysis (PCA), band ratios (BR), and support vector machine (SVM) classification. Overall accuracy and the kappa coefficient of SVM based on ground truth in addition to the results of PCA and BR show an excellent correlation with the existing geological map of the study area. Consequently, the methodology proposed demonstrates a high potential of ASTER and Landsat 8 OLI data in lithological units discrimination.

Study of the uses of Information and Communication Technologies by Pain Treatment Unit Physicians.

PubMed

Muriel Fernandez, Jorge; Sánchez Ledesma, María José; López Millan, Manuel; García Cenador, María Begoña

2017-05-01

Adequate use of Information and Communication Technologies (ICTs) in health has been shown to save the patient and caregiver time, improve access to the health system, improve diagnosis and control of disease or treatment. All this results in cost savings, and more importantly, they help improve the quality of service and the lives of patients. The purpose of this study is to analyse the differences in the uses of this ICTs between those physicians that belong to Pain Treatment Units (PU) and other physicians that work in pain not linked to these PUs. An online survey, generated by Netquest online survey tool, was sent to both groups of professionals and the data collected was statistical analysed through a logistic regression methodology which is the Logit binomial model. Our results show that those physicians that belong to PUs use ICTs more frequently and consider it more relevant to their clinical practice.

Patterns of racial and educational assortative mating in Brazil.

PubMed

Gullickson, Aaron; Torche, Florencia

2014-06-01

Exchange of racial for educational status has been documented for black/white marriages in the United States. Exchange may be an idiosyncratic feature of U.S. society, resulting from unusually strong racial boundaries historically developed there. We examine status exchange across racial lines in Brazil. In contrast to the United States, Brazil features greater fluidity of racial boundaries and a middle tier of "brown" individuals. If exchange is contingent on strong racial boundaries, it should be weak or non-existent in Brazilian society. Contrary to this expectation, we find strong evidence of status exchange. However, this pattern results from a generalized penalty for darkness, which induces a negative association between higher education and marrying darker spouses ("market exchange") rather than from a direct trading of resources by partners ("dyadic exchange"). The substantive and methodological distinction between market and dyadic exchange helps clarify and integrate prior findings in the status exchange literature.

Incorporating online teaching in an introductory pharmaceutical practice course: a study of student perceptions within an Australian University

PubMed Central

Benino, Diana; Girardi, Antonia; Czarniak, Petra

Objective To examine student perceptions regarding online lectures and quizzes undertaken during a pharmaceutical practice course for first year undergraduate students enrolled in the Bachelor of Pharmacy course at an Australian University. Methods The University uses a standard instrument to collect feedback from students regarding unit satisfaction. Data were collected for three different teaching modalities: traditional face-to-face, online and partially online. Results Descriptive statistics support that, from a student's perspective, partial online delivery is the preferred teaching methodology for an introductory pharmaceutical practice unit. Conclusions This study has served to highlight that while there are a few points of significant difference between traditional and online teaching and learning, a combination of the two provides a reasonable avenue for teaching exploration. This result has implications for teaching practice generally, and within the pharmacy discipline, specifically. PMID:24198864

[Health survey in Quilombola communities (descendants of Afro-Brazilian slaves who escaped from slave plantations that existed in Brazil until abolition in 1888) in Vitória da Conquista in the state of Bahia (COMQUISTA Project), Brazil: methodological aspects and descriptive analysis].

PubMed

Bezerra, Vanessa Moraes; Medeiros, Danielle Souto de; Gomes, Karine de Oliveira; Souzas, Raquel; Giatti, Luana; Steffens, Ana Paula; Kochergin, Clavdia Nicolaevna; Souza, Cláudio Lima; Moura, Cristiano Soares de; Soares, Daniela Arruda; Santos, Luis Rogério Cosme Silva; Cardoso, Luiz Gustavo Vieira; Oliveira, Márcio Vasconcelos de; Martins, Poliana Cardoso; Neves, Orlando Sílvio Caires; Guimarães, Mark Drew Crosland

2014-06-01

The scope of this article was to present the methodology, preliminary descriptive results and the reliability of the instruments used in the COMQUISTA Project. It involved a cross-sectional study with adults (>18 years) and children (up to 5 years old) of Quilombola communities in Vitória da Conquista, Bahia. Data collection consisted of individual and household interviews, anthropometric and blood pressure measurements. A semi-structured questionnaire adapted from the Brazilian National Health Survey (PNS) was used and the interviews were conducted using handheld computers. 397 housing units were visited and 797 adults and 130 children were interviewed. The demographic profile of the Quilombolas was similar to the Brazilian population with respect to sex and age, however, they had precarious access to basic sanitation and a low socioeconomic status. The analysis of reliability revealed the adequacy of strategies adopted for quality assurance and control in the study. The methodology used was considered adequate to achieve the objectives and can be used in other populations. The results indicate the need for implementing strategies to improve the quality of life and reduce the degree of vulnerability of the Quilombolas.

Quality Service Analysis and Improvement of Pharmacy Unit of XYZ Hospital Using Value Stream Analysis Methodology

NASA Astrophysics Data System (ADS)

Jonny; Nasution, Januar

2013-06-01

Value stream mapping is a tool which is needed to let the business leader of XYZ Hospital to see what is actually happening in its business process that have caused longer lead time for self-produced medicines in its pharmacy unit. This problem has triggered many complaints filed by patients. After deploying this tool, the team has come up with the fact that in processing the medicine, pharmacy unit does not have any storage and capsule packing tool and this condition has caused many wasting times in its process. Therefore, the team has proposed to the business leader to procure the required tools in order to shorten its process. This research has resulted in shortened lead time from 45 minutes to 30 minutes as required by the government through Indonesian health ministry with increased %VA (valued added activity) or Process Cycle Efficiency (PCE) from 66% to 68% (considered lean because it is upper than required 30%). This result has proved that the process effectiveness has been increase by the improvement.

A Field-Based Aquatic Life Benchmark for Conductivity in ...

EPA Pesticide Factsheets

This report adapts the standard U.S. EPA methodology for deriving ambient water quality criteria. Rather than use toxicity test results, the adaptation uses field data to determine the loss of 5% of genera from streams. The method is applied to derive effect benchmarks for dissolved salts as measured by conductivity in Central Appalachian streams using data from West Virginia and Kentucky. This report provides scientific evidence for a conductivity benchmark in a specific region rather than for the entire United States.

Toward a Methodology for Evaluating the Impact of Situation Awareness on Unit Effectiveness of Dismounted Infantrymen

DTIC Science & Technology

2000-04-01

impact on current TTPs or SOPs as a result of having these capabilities. This review did not generally change Free - play Exercises the nature of the TTP or...these occurred within 6 environment is in a free - play exercise. minutes of critical SA elements. Free - play exercises have been used for many years to...event. This free - play exercises at the squad level. They conduct knowledge was acquired by holding an SME conference. squad exercises to practice

Multi-viewpoint clustering analysis

NASA Technical Reports Server (NTRS)

Mehrotra, Mala; Wild, Chris

1993-01-01

In this paper, we address the feasibility of partitioning rule-based systems into a number of meaningful units to enhance the comprehensibility, maintainability and reliability of expert systems software. Preliminary results have shown that no single structuring principle or abstraction hierarchy is sufficient to understand complex knowledge bases. We therefore propose the Multi View Point - Clustering Analysis (MVP-CA) methodology to provide multiple views of the same expert system. We present the results of using this approach to partition a deployed knowledge-based system that navigates the Space Shuttle's entry. We also discuss the impact of this approach on verification and validation of knowledge-based systems.

Estimation of lifespan and economy parameters of steam-turbine power units in thermal power plants using varying regimes

NASA Astrophysics Data System (ADS)

Aminov, R. Z.; Shkret, A. F.; Garievskii, M. V.

2016-08-01

The use of potent power units in thermal and nuclear power plants in order to regulate the loads results in intense wear of power generating equipment and reduction in cost efficiency of their operation. We review the methodology of a quantitative assessment of the lifespan and wear of steam-turbine power units and estimate the effect of various operation regimes upon their efficiency. To assess the power units' equipment wear, we suggest using the concept of a turbine's equivalent lifespan. We give calculation formulae and an example of calculation of the lifespan of a steam-turbine power unit for supercritical parameters of steam for different options of its loading. The equivalent lifespan exceeds the turbine's assigned lifespan only provided daily shutdown of the power unit during the night off-peak time. We obtained the engineering and economical indices of the power unit operation for different loading regulation options in daily and weekly diagrams. We proved the change in the prime cost of electric power depending on the operation regimes and annual daily number of unloading (non-use) of the power unit's installed capacity. According to the calculation results, the prime cost of electric power for the assumed initial data varies from 11.3 cents/(kW h) in the basic regime of power unit operation (with an equivalent operation time of 166700 hours) to 15.5 cents/(kW h) in the regime with night and holiday shutdowns. The reduction of using the installed capacity of power unit at varying regimes from 3.5 to 11.9 hours per day can increase the prime cost of energy from 4.2 to 37.4%. Furthermore, repair and maintenance costs grow by 4.5% and by 3 times, respectively, in comparison with the basic regime. These results indicate the need to create special maneuverable equipment for working in the varying section of the electric load diagram.

Carbon dioxide storage in unconventional reservoirs workshop: summary of recommendations

USGS Publications Warehouse

Jones, Kevin B.; Blondes, Madalyn S.

2015-01-01

The storage capacity for all unconventional reservoirs may be modeled using a volumetric equation starting with the extent of the rock unit and adjusted using these key factors and reaction terms. The ideas that were developed during this workshop can be used by USGS scientists to develop a methodology to assess the CO2 storage resource in unconventional reservoirs. This methodology could then be released for public comment and peer review. After completing this development process, the USGS could then use the methodology to assess the CO2 storage resource in unconventional reservoirs.

A comparison of generic drug prices in seven European countries: a methodological analysis.

PubMed

Wouters, Olivier J; Kanavos, Panos G

2017-03-31

Policymakers and researchers frequently compare the prices of medicines between countries. Such comparisons often serve as barometers of how pricing and reimbursement policies are performing. The aim of this study was to examine methodological challenges to comparing generic drug prices. We calculated all commonly used price indices based on 2013 IMS Health data on sales of 3156 generic drugs in seven European countries. There were large differences in generic drug prices between countries. However, the results varied depending on the choice of index, base country, unit of volume, method of currency conversion, and therapeutic category. The results also differed depending on whether one looked at the prices charged by manufacturers or those charged by pharmacists. Price indices are a useful statistical approach for comparing drug prices across countries, but researchers and policymakers should interpret price indices with caution given their limitations. Price-index results are highly sensitive to the choice of method and sample. More research is needed to determine the drivers of price differences between countries. The data suggest that some governments should aim to reduce distribution costs for generic drugs.

The trials methodological research agenda: results from a priority setting exercise.

PubMed

Tudur Smith, Catrin; Hickey, Helen; Clarke, Mike; Blazeby, Jane; Williamson, Paula

2014-01-23

Research into the methods used in the design, conduct, analysis, and reporting of clinical trials is essential to ensure that effective methods are available and that clinical decisions made using results from trials are based on the best available evidence, which is reliable and robust. An on-line Delphi survey of 48 UK Clinical Research Collaboration registered Clinical Trials Units (CTUs) was undertaken. During round one, CTU Directors were asked to identify important topics that require methodological research. During round two, their opinion about the level of importance of each topic was recorded, and during round three, they were asked to review the group's average opinion and revise their previous opinion if appropriate. Direct reminders were sent to maximise the number of responses at each round. Results are summarised using descriptive methods. Forty one (85%) CTU Directors responded to at least one round of the Delphi process: 25 (52%) responded in round one, 32 (67%) responded in round two, 24 (50%) responded in round three. There were only 12 (25%) who responded to all three rounds and 18 (38%) who responded to both rounds two and three. Consensus was achieved amongst CTU Directors that the top three priorities for trials methodological research were 'Research into methods to boost recruitment in trials' (considered the highest priority), 'Methods to minimise attrition' and 'Choosing appropriate outcomes to measure'. Fifty other topics were included in the list of priorities and consensus was reached that two topics, 'Radiotherapy study designs' and 'Low carbon trials', were not priorities. This priority setting exercise has identified the research topics felt to be most important to the key stakeholder group of Directors of UKCRC registered CTUs. The use of robust methodology to identify these priorities will help ensure that this work informs the trials methodological research agenda, with a focus on topics that will have most impact and relevance.

The RMTC as a result of 10-year fruitful joint cooperation of the USA, EC and Russia under NMC&A programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickman, Deborah A.; Frigola, P.; Guardini, Sergio

The Ministry for Atomic Energy of the Russian Federation made the decision to establish the Russian Methodological and Training Center (RMTC) not only as the leading center on personnel training in nuclear material control and accounting (NMC&A) field, but also as the center for rendering methodological support to specialists and inspectors in the course of development and implementation of a new Russian NMC&A system and to the state authorities in their regulatory activities. The importance of the project on RMTC establishment and development was the main reason for concentrating significant efforts not only of the United States (U.S.) National Laboratoriesmore » but also of the European Commission's (EC) Joint Research Center (JRC). The coordination of their efforts in the projects implemented under the U.S.-Russia cooperative program and Technical Assistance to the Commonwealth of Independent States (TACIS) program resulted in establishing the RMTC, a unique NMC&A methodological and training center in Russia, that has the state-of-the-art instrumentation and tools and highly qualified personnel. The Center has the possibility to invite not only the State Scientific Center of the Russian Federation - Institute of Physics and Power Engineering named after A. I. Leypunsky (IPPE) specialists but also the specialists from other facilities and agencies to serve as instructors. By now the firm basis for methodological activity has been established in the Center. The RMTC specialists render their knowledge and expertise for many projects on NMC&A upgrading. The RMTC methodological activity is primarily concentrated on development of guidelines on the use of new federal and Rosatom NMC&A regulatory documents. This work is being done with the use of resources and potential of the TACIS program and U.S.-Russia MPC&A program. The paper presents a brief summary of the results achieved in the course of RMTC creation and evolution during the 10-year joint Russian, U.S. and EC efforts.« less

Insertion of GaAs MMICs into EW systems

NASA Astrophysics Data System (ADS)

Schineller, E. R.; Pospishil, A.; Grzyb, J.

1989-09-01

Development activities on a microwave/mm-wave monolithic IC (MIMIC) program are described, as well as the methodology for inserting these GaAs IC chips into several EW systems. The generic EW chip set developed on the MIMIC program consists of 23 broadband chip types, including amplifiers, oscillators, mixers, switches, variable attenuators, power dividers, and power combiners. These chips are being designed for fabrication using the multifunction self-aligned gate process. The benefits from GaAs IC insertion are quantified by a comparison of hardware units fabricated with existing MIC and digital ECL technology and the same units manufactured with monolithic technology. It is found that major improvements in cost, reliability, size, weight, and performance can be realized. Examples illustrating the methodology for technology insertion are presented.

Methodology for the Determination of the Photon Detection Efficiency of Large-Area Multi-Pixel Photon Counters

NASA Astrophysics Data System (ADS)

Beattie, T.; Lolos, G. J.; Papandreou, Z.; Semenov, A. Yu.; Teigrob, L. A.

2015-08-01

Large-area, multi-pixel photon counters will be used for the electromagnetic Barrel Calorimeter of the GlueX experiment at Jefferson Lab. These photo sensors are based on a 3 ×3 mm2 cell populated by 50 μm pixels, with 16 such cells tiled in a 4 ×4 arrangement in the array. The 16 cells are summed electronically and the signals are amplified. The photon detection efficiency of a group of first-article units at room temperature under conditions similar to those of the experiment was extracted to be (28 ±2(stat) ±2(syst))%, by employing an analysis methodology based on Poisson statistics carried out on the summed energy signals from the units.

Educational Inequality in the United States: Methodology and Historical Estimation of Education Gini Coefficients

ERIC Educational Resources Information Center

Bennett, Daniel L.

2011-01-01

This paper estimates historical measures of equality in the distribution of education in the United States by age group and sex. Using educational attainment data for the population, the EduGini measure indicates that educational inequality in the U.S. declined significantly between 1950 and 2009. Reductions in educational inequality were more…

Optimal tree increment models for the Northeastern United Statesq

Treesearch

Don C. Bragg

2003-01-01

used the potential relative increment (PRI) methodology to develop optimal tree diameter growth models for the Northeastern United States. Thirty species from the Eastwide Forest Inventory Database yielded 69,676 individuals, which were then reduced to fast-growing subsets for PRI analysis. For instance, only 14 individuals from the greater than 6,300-tree eastern...

Optimal Tree Increment Models for the Northeastern United States

Treesearch

Don C. Bragg

2005-01-01

I used the potential relative increment (PRI) methodology to develop optimal tree diameter growth models for the Northeastern United States. Thirty species from the Eastwide Forest Inventory Database yielded 69,676 individuals, which were then reduced to fast-growing subsets for PRI analysis. For instance, only 14 individuals from the greater than 6,300-tree eastern...

Recent Studies on the Cost-Effectiveness of Military Training in TTCP Countries.

ERIC Educational Resources Information Center

Fletcher, J. D.; Orlansky, Jesse

This report summarizes 22 recent empirical studies on the cost-effectiveness of military training reported by countries that participate in The Technical Cooperation Program (TTCP), i.e., Australia, Canada, New Zealand, the United Kingdom, and the United States. A discussion of the methodology used to summarize the studies is followed by a…

Rates of Student-Reported Antisocial Behavior, School Suspensions, and Arrests in Victoria, Australia and Washington State, United States

ERIC Educational Resources Information Center

Hemphill, Sheryl A.; McMorris, Barbara J.; Toumbourou, John W.; Herrenkohl, Todd I.; Catalano, Richard F.; Mathers, Megan

2007-01-01

Background: Few methodologically rigorous international comparisons of student-reported antisocial behavior have been conducted. This paper examines whether there are differences in the frequency of both antisocial behavior and societal responses to antisocial behavior in Victoria, Australia and Washington State, United States. These 2 states were…

Student Evaluation Web Sites as Potential Sources of Consumer Information in the United Arab Emirates

ERIC Educational Resources Information Center

Wilkins, Stephen; Epps, Alun

2011-01-01

Purpose: The purpose of this paper is to investigate the attitudes of students in the United Arab Emirates (UAE) towards non-institutionally sanctioned student evaluation web sites, and to consider how educational institutions might respond to the demands of students for specific information. Design/methodology/approach: The study involved a…

The Relationship between Sexist Naming Practices and Athletic Opportunities at Colleges and Universities in the Southern United States

ERIC Educational Resources Information Center

Pelak, Cynthia Fabrizio

2008-01-01

This research examines the phenomenon of sexist naming of women's athletic teams at four-year colleges and universities in the southern United States. Drawing on theoretical and methodological insights from feminist scholarship on gender and sports, gendered language, and intersecting systems of race and gender inequalities, the author analyzes…

A Narrative Inquiry of Chinese Immigrant Students' Educational Experiences in the United States: Language, Culture, and Identity

ERIC Educational Resources Information Center

Deng, Yuwen

2017-01-01

In this dissertation research, I examined the overall educational experiences of Chinese immigrant students, particularly their educational experiences in the United States. Using narrative inquiry methodology in my study, I portrayed the stories of six Chinese immigrant students, including four undergraduates and two graduates in a Midwestern…

Reflections on the Evolution of Educational Leadership Preparation Programs in the United States and Challenges Ahead

ERIC Educational Resources Information Center

McCarthy, Martha

2015-01-01

Purpose: The purpose of this legacy paper is to review leadership preparation over time in the United States and addresses challenges ahead. It is hoped that the US developments will be instructive to an international audience interested in strengthening the preparation of school leaders. Design/methodology/approach: The paper synthesizes research…

Self-Esteem and Academic Achievement: A Comparative Study of Adolescent Students in England and the United States

ERIC Educational Resources Information Center

Booth, Margaret Zoller; Gerard, Jean M.

2011-01-01

Utilizing mixed methodology, this paper investigates the relationship between self-esteem and academic achievement for young adolescents within two Western cultural contexts: the United States and England. Quantitative and qualitative data from 86 North American and 86 British adolescents were utilized to examine the links between self-esteem and…

Development, Implementation, and Evaluation of Leadership/Management Training Within Army Battalions: Volume I: Summary of Findings.

ERIC Educational Resources Information Center

Fry, John P.; Cliborn, Robert E.

The report describes the development and evaluation of an in-unit, leadership/management training program (based on experimental training methodology for providing Army leaders with behavioral skills and techniques) implemented within three battalion-sized combat units at Fort Bliss, Texas, in 1974. The program was organized around workshops…

Timber resource statistics for the Kantishna block, Tanana inventory unit, Alaska, 1973.

Treesearch

Karl M. Hegg

1982-01-01

This report for the 2.9-million-acre Kantishna block is the second of four on the 14-million-acre Tanana Valley inventory unit. Comments are made on general landform, timber use, recreational potential, agricultural developments, forest defect, regeneration, and inventory methodology. Tables are provided for commercial forest land and for operable noncommercial forest...

21 CFR 114.90 - Methodology.

Code of Federal Regulations, 2011 CFR

2011-04-01

... buffer. First standardize the electrodes using a pH 4.0 buffer at or near 25 °C. Standardization control..., the optimum being 25 °C. Any temperature determinations made without meter compensation may affect pH... approximately ±0.01 pH unit and a reproducibility of ±0.005 pH units. (4) General procedure for determining pH...

21 CFR 114.90 - Methodology.

Code of Federal Regulations, 2010 CFR

2010-04-01

... buffer. First standardize the electrodes using a pH 4.0 buffer at or near 25 °C. Standardization control..., the optimum being 25 °C. Any temperature determinations made without meter compensation may affect pH... approximately ±0.01 pH unit and a reproducibility of ±0.005 pH units. (4) General procedure for determining pH...

Development of Probabilistic Rigid Pavement Design Methodologies for Military Airfields.

DTIC Science & Technology

1983-12-01

4A161102AT22, Task AO, Work Unit 009, "Methodology for Considering Material Variability in Pavement Design." OCE Project Monitor was Mr. S. S. Gillespie. The...PREFACE. .. ............................. VOLUME 1: STATE OF THE ART VARIABILITY OF AIRFIELD PAVEMENT MATERIALS VOLUME 11: MATHEMATICAL FORMULATION OF...VOLUME IV: PROBABILISTIC ANALYSIS OF RIGID AIRFIELD DESIGN BY ELASTIC LAYERED THEORY VOLUME I STATE OF THE ART VARIABILITY OF AIRFIELD PAVEMENT MATERIALS

Probing Kill Mechanisms and Tuning Energetic Biocides

DTIC Science & Technology

2018-02-01

Satcher, J. H., Jr.; Poco, J. F. Nanostructured Energetic Materials Using Sol−Gel Methodologies . J. Non -Cryst. Solids 2001, 285, 338−345. (16) Seo, H...customary unit. 2" " Abstract This project focuses on developing a methodology to accurately assess the time- temperature-kill relationships for spores...Task 1: Develop experimental protocol Task 2: Characterize Time-Temperature killing relationship Task 3: Determine kill mechanisms Task 4: Expose

2015 Review on the Extension of the AMedP-8(C) Methodology to New Agents, Materials, and Conditions

DTIC Science & Technology

2016-06-01

Outside the United States (Washington, DC: DOD, November 2013). 6 4715.07 and 4715.08, deal with environmental remediation and restoration. DODI...May 2013), 2. 9 DODI 4715.08, Remediation of Environmental Contamination Outside the United States (Washington, DC: DOD, November 2013). 10 DODD... remediate damage, both in the United States and on overseas installations. Those policies largely extend U.S. legal requirements to DOD installations

Unit-dose packaged drugs for treating malaria.

PubMed

Orton, L; Barnish, G

2005-04-18

Unit-dose packaging of antimalarial drugs may improve malaria cure by making it easier for patients to take their treatment correctly. To summarize the effects of unit-dose packaged treatment on cure and treatment adherence in people with uncomplicated malaria. We searched the Cochrane Infectious Diseases Group Specialized Register (November 2004), CENTRAL (The Cochrane Library Issue 4, 2004), MEDLINE (1966 to November 2004), EMBASE (1980 to November 2004), LILACS (November 2004), conference proceedings, and reference lists of articles. We also contacted pharmaceutical companies, organizations, and researchers in the field. Randomized controlled trials (RCTs), cluster-RCTs, quasi-RCTs, and controlled before-and-after studies of unit-dose packaged drugs for treating uncomplicated malaria. We independently assessed study eligibility and methodological quality, and extracted data for an intention to treat analysis, where possible. We combined binary data using relative risk (RR) and the fixed-effect model, and presented them with 95% confidence intervals (CI). We attempted to contact study authors for additional information. Three quasi-RCTs (895 participants) and one cluster-RCT (6 health facilities) met the inclusion criteria. Trials were of poor methodological quality, and none adequately assessed treatment failure. Unit-dose packaged drugs (in conjunction with prescriber training and patient information) appeared to be associated with higher participant-reported treatment adherence in all trials.A meta-analysis of two trials (596 participants) showed that participant-reported treatment adherence was higher with blister-packed tablets compared with tablets in paper envelopes (RR 1.18, 1.12 to 1.25). Two trials using tablets in sectioned polythene bags as the intervention also noted an increase in participant-reported treatment adherence: the cluster-RCT (6 clusters) compared it with tablets in paper envelopes, and the other trial compared it with syrup in bottles (RR 2.15, 1.76 to 2.61; 299 participants). There is insufficient evidence to determine the effect of unit-dose packaged antimalarial drugs on treatment failure. Unit-dose packaging supported by prescriber training and patient information appears to improve participant-reported treatment adherence, but these data come from trials with methodological limitations.

Statins and Risk of Lower Limb Revision Surgery: The Influence of Differences in Study Design Using Electronic Health Records From the United Kingdom and Denmark

PubMed Central

Lalmohamed, Arief; van Staa, Tjeerd P.; Vestergaard, Peter; Leufkens, Hubertus G. M.; de Boer, Anthonius; Emans, Pieter; Cooper, Cyrus; de Vries, Frank

2016-01-01

Abstract Previous observational studies on statins have shown variable results based on the methodology used. Our objective was to study the association between statins and orthopedic implant failure and to explore the influence of methodological differences in study design. Our study base consisted of patients with a primary total joint replacement in Denmark and the United Kingdom (n = 189,286; 1987–2012). We used 4 study designs: 1) case-control (each patient with revision surgery matched to 4 controls), 2) time-dependent cohort (postoperative statin use as a time-varying exposure variable), 3) immortal time cohort (misclassifying the time postoperatively before statin use), and 4) time-exclusion cohort (excluding the time postoperatively before statin use). Cox proportional hazards models and logistic regression were used to estimate incidence rate ratios. In the time-dependent cohort design, statin use was associated with a decreased risk of revision surgery (adjusted incidence rate ratio (IRR) = 0.90, 95% confidence interval (CI): 0.85, 0.96), which was similar to our case-control results (IRR = 0.87, 95% CI: 0.81, 0.93). In contrast, both time-fixed cohort designs yielded substantially lower risk estimates (IRR = 0.36 (95% CI: 0.34, 0.38) and IRR = 0.65 (95% CI: 0.63, 0.68), respectively). We discourage the use of time-fixed cohort studies, which may falsely suggest protective effects. The simple choice of how to classify exposure can substantially change results from biologically plausible to implausible. PMID:27317693

Guiding principles of USGS methodology for assessment of undiscovered conventional oil and gas resources

USGS Publications Warehouse

Charpentier, R.R.; Klett, T.R.

2005-01-01

During the last 30 years, the methodology for assessment of undiscovered conventional oil and gas resources used by the Geological Survey has undergone considerable change. This evolution has been based on five major principles. First, the U.S. Geological Survey has responsibility for a wide range of U.S. and world assessments and requires a robust methodology suitable for immaturely explored as well as maturely explored areas. Second, the assessments should be based on as comprehensive a set of geological and exploration history data as possible. Third, the perils of methods that solely use statistical methods without geological analysis are recognized. Fourth, the methodology and course of the assessment should be documented as transparently as possible, within the limits imposed by the inevitable use of subjective judgement. Fifth, the multiple uses of the assessments require a continuing effort to provide the documentation in such ways as to increase utility to the many types of users. Undiscovered conventional oil and gas resources are those recoverable volumes in undiscovered, discrete, conventional structural or stratigraphic traps. The USGS 2000 methodology for these resources is based on a framework of assessing numbers and sizes of undiscovered oil and gas accumulations and the associated risks. The input is standardized on a form termed the Seventh Approximation Data Form for Conventional Assessment Units. Volumes of resource are then calculated using a Monte Carlo program named Emc2, but an alternative analytic (non-Monte Carlo) program named ASSESS also can be used. The resource assessment methodology continues to change. Accumulation-size distributions are being examined to determine how sensitive the results are to size-distribution assumptions. The resource assessment output is changing to provide better applicability for economic analysis. The separate methodology for assessing continuous (unconventional) resources also has been evolving. Further studies of the relationship between geologic models of conventional and continuous resources will likely impact the respective resource assessment methodologies. ?? 2005 International Association for Mathematical Geology.

50 CFR 648.18 - Standardized bycatch reporting methodology.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE NORTHEASTERN UNITED STATES General...: Atlantic Bluefish; Atlantic Herring; Atlantic Salmon; Deep-Sea Red Crab; Mackerel, Squid, and Butterfish...

Ethical and Legal Implications of the Methodological Crisis in Neuroimaging.

PubMed

Kellmeyer, Philipp

2017-10-01

Currently, many scientific fields such as psychology or biomedicine face a methodological crisis concerning the reproducibility, replicability, and validity of their research. In neuroimaging, similar methodological concerns have taken hold of the field, and researchers are working frantically toward finding solutions for the methodological problems specific to neuroimaging. This article examines some ethical and legal implications of this methodological crisis in neuroimaging. With respect to ethical challenges, the article discusses the impact of flawed methods in neuroimaging research in cognitive and clinical neuroscience, particularly with respect to faulty brain-based models of human cognition, behavior, and personality. Specifically examined is whether such faulty models, when they are applied to neurological or psychiatric diseases, could put patients at risk, and whether this places special obligations on researchers using neuroimaging. In the legal domain, the actual use of neuroimaging as evidence in United States courtrooms is surveyed, followed by an examination of ways that the methodological problems may create challenges for the criminal justice system. Finally, the article reviews and promotes some promising ideas and initiatives from within the neuroimaging community for addressing the methodological problems.

Unit-Sphere Multiaxial Stochastic-Strength Model Applied to Anisotropic and Composite Materials

NASA Technical Reports Server (NTRS)

Nemeth, Noel, N.

2013-01-01

Models that predict the failure probability of brittle materials under multiaxial loading have been developed by authors such as Batdorf, Evans, and Matsuo. These "unit-sphere" models assume that the strength-controlling flaws are randomly oriented, noninteracting planar microcracks of specified geometry but of variable size. This methodology has been extended to predict the multiaxial strength response of transversely isotropic brittle materials, including polymer matrix composites (PMCs), by considering (1) flaw-orientation anisotropy, whereby a preexisting microcrack has a higher likelihood of being oriented in one direction over another direction, and (2) critical strength, or K (sub Ic) orientation anisotropy, whereby the level of critical strength or fracture toughness for mode I crack propagation, K (sub Ic), changes with regard to the orientation of the microstructure. In this report, results from finite element analysis of a fiber-reinforced-matrix unit cell were used with the unit-sphere model to predict the biaxial strength response of a unidirectional PMC previously reported from the World-Wide Failure Exercise. Results for nuclear-grade graphite materials under biaxial loading are also shown for comparison. This effort was successful in predicting the multiaxial strength response for the chosen problems. Findings regarding stress-state interactions and failure modes also are provided.

Methodology and implications of maximum paleodischarge estimates for mountain channels, upper Animas River basin, Colorado, U.S.A.

USGS Publications Warehouse

Pruess, J.; Wohl, E.E.; Jarrett, R.D.

1998-01-01

Historical and geologic records may be used to enhance magnitude estimates for extreme floods along mountain channels, as demonstrated in this study from the San Juan Mountains of Colorado. Historical photographs and local newspaper accounts from the October 1911 flood indicate the likely extent of flooding and damage. A checklist designed to organize and numerically score evidence of flooding was used in 15 field reconnaissance surveys in the upper Animas River valley of southwestern Colorado. Step-backwater flow modeling estimated the discharges necessary to create longitudinal flood bars observed at 6 additional field sites. According to these analyses, maximum unit discharge peaks at approximately 1.3 m3 s-1 km-2 around 2200 m elevation, with decreased unit discharges at both higher and lower elevations. These results (1) are consistent with Jarrett's (1987, 1990, 1993) maximum 2300-m elevation limit for flash-flooding in the Colorado Rocky Mountains, and (2) suggest that current Probable Maximum Flood (PMF) estimates based on a 24-h rainfall of 30 cm at elevations above 2700 m are unrealistically large. The methodology used for this study should be readily applicable to other mountain regions where systematic streamflow records are of short duration or nonexistent.

Good reasons to implement quality assurance in nationwide breast cancer screening programs in Croatia and Serbia: results from a pilot study.

PubMed

Ciraj-Bjelac, Olivera; Faj, Dario; Stimac, Damir; Kosutic, Dusko; Arandjic, Danijela; Brkic, Hrvoje

2011-04-01

The purpose of this study is to investigate the need for and the possible achievements of a comprehensive QA programme and to look at effects of simple corrective actions on image quality in Croatia and in Serbia. The paper focuses on activities related to the technical and radiological aspects of QA. The methodology consisted of two phases. The aim of the first phase was the initial assessment of mammography practice in terms of image quality, patient dose and equipment performance in selected number of mammography units in Croatia and Serbia. Subsequently, corrective actions were suggested and implemented. Then the same parameters were re-assessed. Most of the suggested corrective actions were simple, low-cost and possible to implement immediately, as these were related to working habits in mammography units, such as film processing and darkroom conditions. It has been demonstrated how simple quantitative assessment of image quality can be used for optimisation purposes. Analysis of image quality parameters as OD, gradient and contrast demonstrated general similarities between mammography practices in Croatia and Serbia. The applied methodology should be expanded to larger number of hospitals and applied on a regular basis. Copyright © 2009 Elsevier Ireland Ltd. All rights reserved.

Space Station Freedom power - A reliability, availability, and maintainability assessment of the proposed Space Station Freedom electric power system

NASA Technical Reports Server (NTRS)

Turnquist, S. R.; Twombly, M.; Hoffman, D.

1989-01-01

A preliminary reliability, availability, and maintainability (RAM) analysis of the proposed Space Station Freedom electric power system (EPS) was performed using the unit reliability, availability, and maintainability (UNIRAM) analysis methodology. Orbital replacement units (ORUs) having the most significant impact on EPS availability measures were identified. Also, the sensitivity of the EPS to variations in ORU RAM data was evaluated for each ORU. Estimates were made of average EPS power output levels and availability of power to the core area of the space station. The results of assessments of the availability of EPS power and power to load distribution points in the space stations are given. Some highlights of continuing studies being performed to understand EPS availability considerations are presented.

Monitoring costs in the ICU: a search for a pertinent methodology.

PubMed

Reis Miranda, D; Jegers, M

2012-10-01

Attempts to determine costs in the intensive care unit (ICU) were not successful until now, as they failed to detect differences of costs between patients. The methodology and/or the instruments used might be at the origin of this failure. Based on the results of the European ICUs studies and on the descriptions of the activities of care in the ICU, we gathered and analysed the relevant literature concerning the monitoring of costs in the ICU. The aim was to formulate a methodology, from an economic perspective, in which future research may be framed. A bottom-up microcosting methodology will enable to distinguish costs between patients. The resulting information will at the same time support the decision-making of top management and be ready to include in the financial system of the hospital. Nursing staff explains about 30% of the total costs. This relation remains constant irrespective of the annual nurse/patient ratio. In contrast with other scoring instruments, the nursing activities score (NAS) covers all nursing activities. (1) NAS is to be chosen for quantifying nursing activities; (2) an instrument for measuring the physician's activities is not yet available; (3) because the nursing activities have a large impact on total costs, the standardisation of the processes of care (following the system approach) will contribute to manage costs, making also reproducible the issue of quality of care; (4) the quantification of the nursing activities may be the required (proxy) input for the automated bottom-up monitoring of costs in the ICU. © 2012 The Authors. Acta Anaesthesiologica Scandinavica © 2012 The Acta Anaesthesiologica Scandinavica Foundation.

Using a Lean Six Sigma Approach to Yield Sustained Pressure Ulcer Prevention for Complex Critical Care Patients.

PubMed

Donovan, Elizabeth A; Manta, Christine J; Goldsack, Jennifer C; Collins, Michelle L

2016-01-01

Under value-based purchasing, Medicare withholds reimbursements for hospital-acquired pressure ulcer occurrence and rewards hospitals that meet performance standards. With little evidence of a validated prevention process, nurse managers are challenged to find evidence-based interventions. The aim of this study was to reduce the unit-acquired pressure ulcer (UAPU) rate on targeted intensive care and step-down units by 15% using Lean Six Sigma (LSS) methodology. An interdisciplinary team designed a pilot program using LSS methodology to test 4 interventions: standardized documentation, equipment monitoring, patient out-of-bed-to-chair monitoring, and a rounding checklist. During the pilot, the UAPU rate decreased from 4.4% to 2.8%, exceeding the goal of a 15% reduction. The rate remained below the goal through the program control phase at 2.9%, demonstrating a statistically significant reduction after intervention implementation. The program significantly reduced UAPU rates in high-risk populations. LSS methodologies are a sustainable approach to reducing hospital-acquired conditions that should be broadly tested and implemented.

A method for assessing carbon stocks, carbon sequestration, and greenhouse-gas fluxes in ecosystems of the United States under present conditions and future scenarios

Treesearch

Zhiliang Zhu; Brian Bergamaschi; Richard Bernknopf; David Clow; Dennis Dye; Stephen Faulkner; William Forney; Robert Gleason; Todd Hawbaker; Jinxun Liu; Shuguang Liu; Stephen Prisley; Bradley Reed; Matthew Reeves; Matthew Rollins; Benjamin Sleeter; Terry Sohl; Sarah Stackpoole; Stephen Stehman; Robert Striegl; Anne Wein

2010-01-01

This methodology was developed to fulfill a requirement by the Energy Independence and Security Act of 2007 (EISA). The EISA legislation mandates the U.S. Department of the Interior (DOI) to develop a methodology and conduct an assessment of carbon storage, carbon sequestration, and fluxes of three principal greenhouse gases (GHG) for the Nation's ecosystems. The...

Predicting survival in critical patients by use of body temperature regularity measurement based on approximate entropy.

PubMed

Cuesta, D; Varela, M; Miró, P; Galdós, P; Abásolo, D; Hornero, R; Aboy, M

2007-07-01

Body temperature is a classical diagnostic tool for a number of diseases. However, it is usually employed as a plain binary classification function (febrile or not febrile), and therefore its diagnostic power has not been fully developed. In this paper, we describe how body temperature regularity can be used for diagnosis. Our proposed methodology is based on obtaining accurate long-term temperature recordings at high sampling frequencies and analyzing the temperature signal using a regularity metric (approximate entropy). In this study, we assessed our methodology using temperature registers acquired from patients with multiple organ failure admitted to an intensive care unit. Our results indicate there is a correlation between the patient's condition and the regularity of the body temperature. This finding enabled us to design a classifier for two outcomes (survival or death) and test it on a dataset including 36 subjects. The classifier achieved an accuracy of 72%.

The Relationships of Intergroup Ideologies to Ethnic Prejudice: A Meta-Analysis.

PubMed

Whitley, Bernard E; Webster, Gregory D

2018-04-01

This meta-analysis summarizes the results of research on the relationships of majority group members' endorsement of assimilation, colorblindness, multiculturalism, and the relative relationships of colorblindness and multiculturalism to ethnic prejudice. Random effects analyses found that assimilation was positively related to explicit prejudice ( g. = 0.80), multiculturalism was negatively related to both explicit ( g. = -0.26) and implicit prejudice ( g. = -0.19), and colorblindness was negatively related to explicit prejudice ( g. = -0.07). Multiculturalism was more closely associated with low prejudice than colorblindness ( g. = 0.15). Effect sizes varied as a function of methodology (experimental vs. correlational), country in which research was conducted (United States vs. other countries), and, in experimental studies of multiculturalism, type of prime used (abstract vs. concrete). Discussion points include methodological issues, groups used as targets of prejudice, national diversity norms, additional issues raised in the studies reviewed, and directions for future research.

Prescription-event monitoring: methodology and recent progress.

PubMed

Rawson, N S; Pearce, G L; Inman, W H

1990-01-01

Event monitoring was first suggested 25 years ago as a way of detecting adverse reactions to drugs. Prescription-event monitoring (PEM), which has been developed by the Drug Safety Research Unit, is the first large-scale systematic post-marketing surveillance method to use event monitoring in the U.K. PEM identifies patients, who have been prescribed a particular drug, and their doctors from photocopies of National Health Service prescriptions which are processed centrally in England. A personalized follow-up questionnaire ("green form") is mailed to each patient's general practitioner, usually on the first anniversary of the initial prescription, asking for information about the patient, especially any "events" that he or she may have experienced since beginning treatment with the drug. The methodology of PEM is presented, together with examples of analyses that can be performed using results from recent studies. The problems and benefits of PEM are discussed.

Two-factor theory – at the intersection of health care management and patient satisfaction

PubMed Central

Bohm, Josef

2012-01-01

Using data obtained from the 2004 Joint Canadian/United States Survey of Health, an analytic model using principles derived from Herzberg’s motivational hygiene theory was developed for evaluating patient satisfaction with health care. The analysis sought to determine whether survey variables associated with consumer satisfaction act as Hertzberg factors and contribute to survey participants’ self-reported levels of health care satisfaction. To validate the technique, data from the survey were analyzed using logistic regression methods and then compared with results obtained from the two-factor model. The findings indicate a high degree of correlation between the two methods. The two-factor analytical methodology offers advantages due to its ability to identify whether a factor assumes a motivational or hygienic role and assesses the influence of a factor within select populations. Its ease of use makes this methodology well suited for assessment of multidimensional variables. PMID:23055755

Two-factor theory - at the intersection of health care management and patient satisfaction.

PubMed

Bohm, Josef

2012-01-01

Using data obtained from the 2004 Joint Canadian/United States Survey of Health, an analytic model using principles derived from Herzberg's motivational hygiene theory was developed for evaluating patient satisfaction with health care. The analysis sought to determine whether survey variables associated with consumer satisfaction act as Hertzberg factors and contribute to survey participants' self-reported levels of health care satisfaction. To validate the technique, data from the survey were analyzed using logistic regression methods and then compared with results obtained from the two-factor model. The findings indicate a high degree of correlation between the two methods. The two-factor analytical methodology offers advantages due to its ability to identify whether a factor assumes a motivational or hygienic role and assesses the influence of a factor within select populations. Its ease of use makes this methodology well suited for assessment of multidimensional variables.

BSM2 Plant-Wide Model construction and comparative analysis with other methodologies for integrated modelling.

PubMed

Grau, P; Vanrolleghem, P; Ayesa, E

2007-01-01

In this paper, a new methodology for integrated modelling of the WWTP has been used for the construction of the Benchmark Simulation Model N degrees 2 (BSM2). The transformations-approach proposed in this methodology does not require the development of specific transformers to interface unit process models and allows the construction of tailored models for a particular WWTP guaranteeing the mass and charge continuity for the whole model. The BSM2 PWM constructed as case study, is evaluated by means of simulations under different scenarios and its validity in reproducing water and sludge lines in WWTP is demonstrated. Furthermore the advantages that this methodology presents compared to other approaches for integrated modelling are verified in terms of flexibility and coherence.

The guidance methodology of a new automatic guided laser theodolite system

NASA Astrophysics Data System (ADS)

Zhang, Zili; Zhu, Jigui; Zhou, Hu; Ye, Shenghua

2008-12-01

Spatial coordinate measurement systems such as theodolites, laser trackers and total stations have wide application in manufacturing and certification processes. The traditional operation of theodolites is manual and time-consuming which does not meet the need of online industrial measurement, also laser trackers and total stations need reflective targets which can not realize noncontact and automatic measurement. A new automatic guided laser theodolite system is presented to achieve automatic and noncontact measurement with high precision and efficiency which is comprised of two sub-systems: the basic measurement system and the control and guidance system. The former system is formed by two laser motorized theodolites to accomplish the fundamental measurement tasks while the latter one consists of a camera and vision system unit mounted on a mechanical displacement unit to provide azimuth information of the measured points. The mechanical displacement unit can rotate horizontally and vertically to direct the camera to the desired orientation so that the camera can scan every measured point in the measuring field, then the azimuth of the corresponding point is calculated for the laser motorized theodolites to move accordingly to aim at it. In this paper the whole system composition and measuring principle are analyzed, and then the emphasis is laid on the guidance methodology for the laser points from the theodolites to move towards the measured points. The guidance process is implemented based on the coordinate transformation between the basic measurement system and the control and guidance system. With the view field angle of the vision system unit and the world coordinate of the control and guidance system through coordinate transformation, the azimuth information of the measurement area that the camera points at can be attained. The momentary horizontal and vertical changes of the mechanical displacement movement are also considered and calculated to provide real time azimuth information of the pointed measurement area by which the motorized theodolite will move accordingly. This methodology realizes the predetermined location of the laser points which is within the camera-pointed scope so that it accelerates the measuring process and implements the approximate guidance instead of manual operations. The simulation results show that the proposed method of automatic guidance is effective and feasible which provides good tracking performance of the predetermined location of laser points.

Timber resource statistics for the upper Tanana block, Tanana inventory unit, Alaska, 1974.

Treesearch

Karl M. Hegg

1983-01-01

This report for the 3.6-million-acre Upper Tanana block is the third of four on the 14-million-acre Tanana Valley forest inventory unit. Descriptions of area, climate, forest, general resource use, and inventory methodology are presented. Area and volume tables are provided for commercial and operable noncommercial forest lands. Estimates for commercial forest land...

Teaching Beyond the Borders: A Review of the Global Studies Latin America Unit.

ERIC Educational Resources Information Center

Cohen, Julian

The New York City Board of Education's unit on Latin America (Global Studies Grade 9) is a welcome and useful aid to teachers seeking to develop a social studies curriculum with a global perspective. Besides the contemporary relevance, the methodology of the curriculum closely adheres to current thinking on teaching social studies. The lessons and…

The Emergent Charter School Model for Ninth Grade Mildly Disabled United States Students: Extending to Africa

ERIC Educational Resources Information Center

Vincent, Emmanuel Teah

2009-01-01

An ethnographic, descriptive research methodology was used to explore the service delivery of three U.S. charter schools (one independent and two dependent secondary public charter schools) in Southern New England, United States as they relate to grade nine mildly disabled special needs students. Field research was also conducted in Costa Rica and…

What is a Baseline for Effective Information Technology Governance for Higher Education Institutions that are Members of Research University CIO Conclave in United States?

ERIC Educational Resources Information Center

Mohseni, Maryam

2012-01-01

This research study provides the findings of a modified Delphi methodology conducted to define components and baseline for effective information technology governance for higher education institutions member of the Research University CIO Conclave (RUCC) in United States. The participating experts are Chief Information Officers (CIOs) of…

Teaching Self- and Social Competencies in the Retail Sector: Findings from Vocational Schools in Germany, Italy and Poland

ERIC Educational Resources Information Center

Edeling, Sabrina; Pilz, Matthias

2016-01-01

Purpose: The purpose of this paper is to use teaching and learning units specially devised for development of self-competencies and social competencies in the retail sector to explore how learners assess these units in relation to acceptance, quality and self-assessment of improvement in their own performance. Design/methodology/approach: The…

14 CFR Appendix A to Part 187 - Methodology for Computation of Fees for Certification Services Performed Outside the United States

Code of Federal Regulations, 2010 CFR

2010-01-01

... persons outside the United States. (b) These rates are based on aviation safety inspector time rather than calculating a separate rate for managerial or clerical time because the inspector is the individual performing the actual service. Charging for inspector time, while building in all costs into the rate base...

14 CFR Appendix A to Part 187 - Methodology for Computation of Fees for Certification Services Performed Outside the United States

Code of Federal Regulations, 2014 CFR

2014-01-01

... persons outside the United States. (b) These rates are based on aviation safety inspector time rather than calculating a separate rate for managerial or clerical time because the inspector is the individual performing the actual service. Charging for inspector time, while building in all costs into the rate base...

14 CFR Appendix A to Part 187 - Methodology for Computation of Fees for Certification Services Performed Outside the United States

Code of Federal Regulations, 2012 CFR

2012-01-01

... persons outside the United States. (b) These rates are based on aviation safety inspector time rather than calculating a separate rate for managerial or clerical time because the inspector is the individual performing the actual service. Charging for inspector time, while building in all costs into the rate base...

14 CFR Appendix A to Part 187 - Methodology for Computation of Fees for Certification Services Performed Outside the United States

Code of Federal Regulations, 2011 CFR

2011-01-01

... persons outside the United States. (b) These rates are based on aviation safety inspector time rather than calculating a separate rate for managerial or clerical time because the inspector is the individual performing the actual service. Charging for inspector time, while building in all costs into the rate base...

A longitudinal evaluation of a project-based learning initiative in an engineering undergraduate programme

NASA Astrophysics Data System (ADS)

Hall, Wayne; Palmer, Stuart; Bennett, Mitchell

2012-05-01

Project-based learning (PBL) is a well-known student-centred methodology for engineering design education. The methodology claims to offer a number of educational benefits. This paper evaluates the student perceptions of the initial and second offering of a first-year design unit at Griffith University in Australia. It builds on an earlier evaluation conducted after the initial offering of the unit. It considers the implementation of the recommended changes. Evaluations of the two offerings reveal that students (in both the initial and second offering) generally enjoyed the experience, but that the second offering was found to be a significantly more enjoyable learning experience. Students in the second offering also reported a significantly better understanding of what they needed to do for the design projects and where to find the requisite information. The oral presentation aspect of the initial and second offerings received the lowest satisfaction rating. The inclusion (and delivery) of the computer-aided drawing component of the unit is seen as a positive aspect by some students, but many others comment on it negatively. The best aspects of the PBL unit and those aspects needing further improvement were similar to the findings of other investigations documented in the literature.

Product vs corporate carbon footprint: Some methodological issues. A case study and review on the wine sector.

PubMed

Navarro, Alejandra; Puig, Rita; Fullana-I-Palmer, Pere

2017-03-01

Carbon footprint (CF) is nowadays one of the most widely used environmental indicators. The scope of the CF assessment could be corporate (when all production processes of a company are evaluated, together with upstream and downstream processes following a life cycle approach) or product (when one of the products is evaluated throughout its life cycle). Our hypothesis was that usually product CF studies (PCF) collect corporate data, because it is easier for companies to obtain them than product data. Six main methodological issues to take into account when collecting corporate data to be used for PCF studies were postulated and discussed in the present paper: fugitive emissions, credits from waste recycling, use of "equivalent factors", reference flow definition, accumulation and allocation of corporate values to minor products. A big project with 18 wineries, being wine one of the most important agri-food products assessed through CF methodologies, was used to study and to exemplify these 6 methodological issues. One of the main conclusions was that indeed, it is possible to collect corporate inventory data in a per year basis to perform a PCF, but having in mind the 6 methodological issues described here. In the literature, most of the papers are presenting their results as a PCF, while they collected company data and obtained, in fact, a "key performance indicator" (ie., CO 2 eq emissions per unit of product produced), which is then used as a product environmental impact figure. The methodology discussed in this paper for the wine case study is widely applicable to any other product or industrial activity. Copyright © 2017 Elsevier B.V. All rights reserved.

Auditing as Part of the Terminology Design Life Cycle

PubMed Central

Min, Hua; Perl, Yehoshua; Chen, Yan; Halper, Michael; Geller, James; Wang, Yue

2006-01-01

Objective To develop and test an auditing methodology for detecting errors in medical terminologies satisfying systematic inheritance. This methodology is based on various abstraction taxonomies that provide high-level views of a terminology and highlight potentially erroneous concepts. Design Our auditing methodology is based on dividing concepts of a terminology into smaller, more manageable units. First, we divide the terminology’s concepts into areas according to their relationships/roles. Then each multi-rooted area is further divided into partial-areas (p-areas) that are singly-rooted. Each p-area contains a set of structurally and semantically uniform concepts. Two kinds of abstraction networks, called the area taxonomy and p-area taxonomy, are derived. These taxonomies form the basis for the auditing approach. Taxonomies tend to highlight potentially erroneous concepts in areas and p-areas. Human reviewers can focus their auditing efforts on the limited number of problematic concepts following two hypotheses on the probable concentration of errors. Results A sample of the area taxonomy and p-area taxonomy for the Biological Process (BP) hierarchy of the National Cancer Institute Thesaurus (NCIT) was derived from the application of our methodology to its concepts. These views led to the detection of a number of different kinds of errors that are reported, and to confirmation of the hypotheses on error concentration in this hierarchy. Conclusion Our auditing methodology based on area and p-area taxonomies is an efficient tool for detecting errors in terminologies satisfying systematic inheritance of roles, and thus facilitates their maintenance. This methodology concentrates a domain expert’s manual review on portions of the concepts with a high likelihood of errors. PMID:16929044

Influence of Teaching Strategies and its Order of Exposure on Pre-Clinical Teeth Arrangement – A Pilot Study

PubMed Central

Mani, Uma Maheswari; Christian, Jayanth; Seenivasan, Madhan Kumar; Natarajan, Parthasarathy; Vaidhyanathan, Anand Kumar

2016-01-01

Introduction Teeth arrangement is a vital skill for the undergraduate dental student. The attainment of skills depends largely on the methodology of teaching. In a dental curriculum, the students are exposed to a wide variety of inputs and teaching methodologies from different sources. The educational unit in dental school must identify the sequence of teaching methods that enhance the learning and practising ability of students. Aim The aim of this study was to evaluate the effectiveness of three different teaching methodologies for teeth arrangement and compare the differences between the orders of exposure to each teaching methodology on the development of teeth arrangement skills. Materials and Methods The first year B.D.S students were study participants and were divided into three groups A, B, C. They were exposed to three teaching patterns namely live demonstration with video assisted teaching, group discussion with hand-outs and lectures with power point presentation. After each teaching methodology, their skill was assessed. The groups were exposed to three methodologies in different order for three arrangements. The scores obtained were analysed using Kruskal Wallis rank sum test and Dunn test for statistical significance. Results Significantly higher scores in the teeth arrangement procedure were obtained by the Group A students who were exposed initially to live demonstration with video-assisted teaching. Difference in the scores was noted among and within the groups. The difference between Group A and Group C was statistically significant after both first and third teeth arrangement (p=0.0031, p=0.0057). Conclusion The study suggests each pre-clinical practice should begin with a live demonstration to enhance immediate learning absorption followed by lectures with power point presentation and group discussion for retention of knowledge and memory retrieval. PMID:27891468

Map of assessed continuous (unconventional) oil resources in the United States, 2014

USGS Publications Warehouse

,; Biewick, Laura R. H.

2015-01-01

The U.S. Geological Survey (USGS) conducts quantitative assessments of potential oil and gas resources of the onshore United States and associated coastal State waters. Since 2000, the USGS has completed assessments of continuous (unconventional) resources in the United States based on geologic studies and analysis of well-production data and has compiled digital maps of the assessment units classified into four categories: shale gas, tight gas, coalbed gas, and shale oil or tight oil (continuous oil). This is the fourth digital map product in a series of USGS unconventional oil and gas resource maps; its focus being shale-oil or tight-oil (continuous-oil) assessments. The map plate included in this report can be printed in hardcopy form or downloaded in a Geographic Information System (GIS) data package, which includes an ArcGIS ArcMap document (.mxd), geodatabase (.gdb), and a published map file (.pmf). Supporting geologic studies of total petroleum systems and assessment units, as well as studies of the methodology used in the assessment of continuous-oil resources in the United States, are listed with hyperlinks in table 1. Assessment results and geologic reports are available at the USGS websitehttp://energy.usgs.gov/OilGas/AssessmentsData/NationalOilGasAssessment.aspx.

A Methodology for Protective Vibration Monitoring of Hydropower Units Based on the Mechanical Properties.

PubMed

Nässelqvist, Mattias; Gustavsson, Rolf; Aidanpää, Jan-Olov

2013-07-01

It is important to monitor the radial loads in hydropower units in order to protect the machine from harmful radial loads. Existing recommendations in the standards regarding the radial movements of the shaft and bearing housing in hydropower units, ISO-7919-5 (International Organization for Standardization, 2005, "ISO 7919-5: Mechanical Vibration-Evaluation of Machine Vibration by Measurements on Rotating Shafts-Part 5: Machine Sets in Hydraulic Power Generating and Pumping Plants," Geneva, Switzerland) and ISO-10816-5 (International Organization for Standardization, 2000, "ISO 10816-5: Mechanical Vibration-Evaluation of Machine Vibration by Measurements on Non-Rotating Parts-Part 5: Machine Sets in Hydraulic Power Generating and Pumping Plants," Geneva, Switzerland), have alarm levels based on statistical data and do not consider the mechanical properties of the machine. The synchronous speed of the unit determines the maximum recommended shaft displacement and housing acceleration, according to these standards. This paper presents a methodology for the alarm and trip levels based on the design criteria of the hydropower unit and the measured radial loads in the machine during operation. When a hydropower unit is designed, one of its design criteria is to withstand certain loads spectra without the occurrence of fatigue in the mechanical components. These calculated limits for fatigue are used to set limits for the maximum radial loads allowed in the machine before it shuts down in order to protect itself from damage due to high radial loads. Radial loads in hydropower units are caused by unbalance, shape deviations, dynamic flow properties in the turbine, etc. Standards exist for balancing and manufacturers (and power plant owners) have recommendations for maximum allowed shape deviations in generators. These standards and recommendations determine which loads, at a maximum, should be allowed before an alarm is sent that the machine needs maintenance. The radial bearing load can be determined using load cells, bearing properties multiplied by shaft displacement, or bearing bracket stiffness multiplied by housing compression or movement. Different load measurement methods should be used depending on the design of the machine and accuracy demands in the load measurement. The methodology presented in the paper is applied to a 40 MW hydropower unit; suggestions are presented for the alarm and trip levels for the machine based on the mechanical properties and radial loads.

Continued investigation of solid propulsion economics. Task 1B: Large solid rocket motor case fabrication methods - Supplement process complexity factor cost technique

NASA Technical Reports Server (NTRS)

Baird, J.

1967-01-01

This supplement to Task lB-Large Solid Rocket Motor Case Fabrication Methods supplies additional supporting cost data and discusses in detail the methodology that was applied to the task. For the case elements studied, the cost was found to be directly proportional to the Process Complexity Factor (PCF). The PCF was obtained for each element by identifying unit processes that are common to the elements and their alternative manufacturing routes, by assigning a weight to each unit process, and by summing the weighted counts. In three instances of actual manufacture, the actual cost per pound equaled the cost estimate based on PCF per pound, but this supplement, recognizes that the methodology is of limited, rather than general, application.

Analysis and design of high-power and efficient, millimeter-wave power amplifier systems using zero degree combiners

NASA Astrophysics Data System (ADS)

Tai, Wei; Abbasi, Mortez; Ricketts, David S.

2018-01-01

We present the analysis and design of high-power millimetre-wave power amplifier (PA) systems using zero-degree combiners (ZDCs). The methodology presented optimises the PA device sizing and the number of combined unit PAs based on device load pull simulations, driver power consumption analysis and loss analysis of the ZDC. Our analysis shows that an optimal number of N-way combined unit PAs leads to the highest power-added efficiency (PAE) for a given output power. To illustrate our design methodology, we designed a 1-W PA system at 45 GHz using a 45 nm silicon-on-insulator process and showed that an 8-way combined PA has the highest PAE that yields simulated output power of 30.6 dBm and 31% peak PAE.

Assessing population exposure for landslide risk analysis using dasymetric cartography

NASA Astrophysics Data System (ADS)

Garcia, Ricardo A. C.; Oliveira, Sergio C.; Zezere, Jose L.

2015-04-01

Exposed Population is a major topic that needs to be taken into account in a full landslide risk analysis. Usually, risk analysis is based on an accounting of inhabitants number or inhabitants density, applied over statistical or administrative terrain units, such as NUTS or parishes. However, this kind of approach may skew the obtained results underestimating the importance of population, mainly in territorial units with predominance of rural occupation. Furthermore, the landslide susceptibility scores calculated for each terrain unit are frequently more detailed and accurate than the location of the exposed population inside each territorial unit based on Census data. These drawbacks are not the ideal setting when landslide risk analysis is performed for urban management and emergency planning. Dasymetric cartography, which uses a parameter or set of parameters to restrict the spatial distribution of a particular phenomenon, is a methodology that may help to enhance the resolution of Census data and therefore to give a more realistic representation of the population distribution. Therefore, this work aims to map and to compare the population distribution based on a traditional approach (population per administrative terrain units) and based on dasymetric cartography (population by building). The study is developed in the Region North of Lisbon using 2011 population data and following three main steps: i) the landslide susceptibility assessment based on statistical models independently validated; ii) the evaluation of population distribution (absolute and density) for different administrative territorial units (Parishes and BGRI - the basic statistical unit in the Portuguese Census); and iii) the dasymetric population's cartography based on building areal weighting. Preliminary results show that in sparsely populated administrative units, population density differs more than two times depending on the application of the traditional approach or the dasymetric cartography. This work was supported by the FCT - Portuguese Foundation for Science and Technology.

Geologic framework for the national assessment of carbon dioxide storage resources: Bighorn Basin, Wyoming and Montana: Chapter A in Geologic framework for the national assessment of carbon dioxide storage resources

USGS Publications Warehouse

Covault, Jacob A.; Buursink, Mark L.; Craddock, William H.; Merrill, Matthew D.; Blondes, Madalyn S.; Gosai, Mayur A.; Freeman, P.A.; Warwick, Peter D.; Corum, Margo D.

2012-01-01

This report identifies and contains geologic descriptions of twelve storage assessment units (SAUs) in six separate packages of sedimentary rocks within the Bighorn Basin of Wyoming and Montana and focuses on the particular characteristics, specified in the methodology, that influence the potential CO2 storage resource in those SAUs. Specific descriptions of the SAU boundaries as well as their sealing and reservoir units are included. Properties for each SAU such as depth to top, gross thickness, net porous thickness, porosity, permeability, groundwater quality, and structural reservoir traps are provided to illustrate geologic factors critical to the assessment. Although assessment results are not contained in this report, the geologic information included here will be employed, as specified in the methodology of earlier work, to calculate a statistical Monte Carlo-based distribution of potential storage space in the various SAUs. Figures in this report show SAU boundaries and cell maps of well penetrations through the sealing unit into the top of the storage formation. Wells sharing the same well borehole are treated as a single penetration. Cell maps show the number of penetrating wells within one square mile and are derived from interpretations of incompletely attributed well data, a digital compilation that is known not to include all drilling. The USGS does not expect to know the location of all wells and cannot guarantee the amount of drilling through specific formations in any given cell shown on cell maps.

Reference Model 5 (RM5): Oscillating Surge Wave Energy Converter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Y. H.; Jenne, D. S.; Thresher, R.

This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter (OSWEC) reference model design in a complementary manner to Reference Models 1-4 contained in the above report. A conceptual design for a taut moored oscillating surge wave energy converter was developed. The design had an annual electrical power of 108 kilowatts (kW), rated power of 360 kW, and intended deployment at water depths between 50 m and 100 m. The study includes structural analysis, power output estimation, a hydraulic power conversionmore » chain system, and mooring designs. The results were used to estimate device capital cost and annual operation and maintenance costs. The device performance and costs were used for the economic analysis, following the methodology presented in SAND2013-9040 that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays up to 100 devices. The levelized cost of energy estimated for the Reference Model 5 OSWEC, presented in this report, was for a single device and arrays of 10, 50, and 100 units, and it enabled the economic analysis to account for cost reductions associated with economies of scale. The baseline commercial levelized cost of energy estimate for the Reference Model 5 device in an array comprised of 10 units is $1.44/kilowatt-hour (kWh), and the value drops to approximately $0.69/kWh for an array of 100 units.« less

The Communication and Bioethical Training (CoBiT) Program for assisting dialysis decision-making in Spanish ACKD units.

PubMed

García-Llana, Helena; Bajo, Maria-Auxiliadora; Barbero, Javier; Selgas, Rafael; Del Peso, Gloria

2017-04-01

Healthcare professionals currently working in Advanced Chronic Kidney Disease (ACKD) units must cope with difficult situations regarding assisting patients with the dialysis decision-making process, and they are often untrained for these conversations. Although we have evidence from the literature that these skills can be learned, few professionals feel confident in this area. A Communication and Bioethical Training (CoBiT) Program for ACKD staff (physicians, nurses and allied health professionals) was developed to improve their ability and self-confidence in conducting these conversations. A four-stage study was conducted: (1) development of the CoBiT program, beginning with the creation of an interdisciplinary focus group (N = 10); (2) design of a questionnaire to assess self-confidence based on the areas identified by the focus group. The face validity of the instrument was tested using an inter-judge methodology (N = 6); (3) design of the format and contents of the program; (4) piloting the program. Thirty-six health professionals took an 8-h workshop based on role-playing methodology. Participants assessed their self-confidence in their communication skills before and after the program using self-report measures. The results show that after the program, participants reported significantly higher levels of self-confidence measured with a five-point Likert scale (p < 0.001). Participants felt that communication with colleagues of other professions significantly increased after the workshop (p = 0.004). The CoBiT program improves ACKD Unit healthcare professionals' self-confidence in their ability to perform a specific communication task.

What Makes a Good Palliative Care Physician? A Qualitative Study about the Patient’s Expectations and Needs when Being Admitted to a Palliative Care Unit

PubMed Central

Masel, Eva K; Kitta, Anna; Huber, Patrick; Rumpold, Tamara; Unseld, Matthias; Schur, Sophie; Porpaczy, Edit; Watzke, Herbert H

2016-01-01

Objective The aims of the study were to examine a) patients’ knowledge of palliative care, b) patients’ expectations and needs when being admitted to a palliative care unit, and c) patient’s concept of a good palliative care physician. Methods The study was based on a qualitative methodology, comprising 32 semistructured interviews with advanced cancer patients admitted to the palliative care unit of the Medical University of Vienna. Interviews were conducted with 20 patients during the first three days after admission to the unit and after one week, recorded digitally, and transcribed verbatim. Data were analyzed using NVivo 10 software, based on thematic analysis enhanced with grounded theory techniques. Results The results revealed four themes: (1) information about palliative care, (2) supportive care needs, (3) being treated in a palliative care unit, and (4) qualities required of palliative care physicians. The data showed that patients lack information about palliative care, that help in social concerns plays a central role in palliative care, and attentiveness as well as symptom management are important to patients. Patients desire a personal patient-physician relationship. The qualities of a good palliative care physician were honesty, the ability to listen, taking time, being experienced in their field, speaking the patient’s language, being human, and being gentle. Patients experienced relief when being treated in a palliative care unit, perceived their care as an interdisciplinary activity, and felt that their burdensome symptoms were being attended to with emotional care. Negative perceptions included the overtly intense treatment. Conclusions The results of the present study offer an insight into what patients expect from palliative care teams. Being aware of patient’s needs will enable medical teams to improve professional and individualized care. PMID:27389693

Air quality impacts of distributed energy resources implemented in the northeastern United States.

PubMed

Carreras-Sospedra, Marc; Dabdub, Donald; Brouwer, Jacob; Knipping, Eladio; Kumar, Naresh; Darrow, Ken; Hampson, Anne; Hedman, Bruce

2008-07-01

Emissions from the potential installation of distributed energy resources (DER) in the place of current utility-scale power generators have been introduced into an emissions inventory of the northeastern United States. A methodology for predicting future market penetration of DER that considers economics and emission factors was used to estimate the most likely implementation of DER. The methodology results in spatially and temporally resolved emission profiles of criteria pollutants that are subsequently introduced into a detailed atmospheric chemistry and transport model of the region. The DER technology determined by the methodology includes 62% reciprocating engines, 34% gas turbines, and 4% fuel cells and other emerging technologies. The introduction of DER leads to retirement of 2625 MW of existing power plants for which emissions are removed from the inventory. The air quality model predicts maximum differences in air pollutant concentrations that are located downwind from the central power plants that were removed from the domain. Maximum decreases in hourly peak ozone concentrations due to DER use are 10 ppb and are located over the state of New Jersey. Maximum decreases in 24-hr average fine particulate matter (PM2.5) concentrations reach 3 microg/m3 and are located off the coast of New Jersey and New York. The main contribution to decreased PM2.5 is the reduction of sulfate levels due to significant reductions in direct emissions of sulfur oxides (SO(x)) from the DER compared with the central power plants removed. The scenario presented here represents an accelerated DER penetration case with aggressive emission reductions due to removal of highly emitting power plants. Such scenario provides an upper bound for air quality benefits of DER implementation scenarios.

Evaluation of global water quality - the potential of a data- and model-driven analysis

NASA Astrophysics Data System (ADS)

Bärlund, Ilona; Flörke, Martina; Alcamo, Joseph; Völker, Jeanette; Malsy, Marcus; Kaus, Andrew; Reder, Klara; Büttner, Olaf; Katterfeld, Christiane; Dietrich, Désirée; Borchardt, Dietrich

2016-04-01

The ongoing socio-economic development presents a new challenge for water quality worldwide, especially in developing and emerging countries. It is estimated that due to population growth and the extension of water supply networks, the amount of waste water will rise sharply. This can lead to an increased risk of surface water quality degradation, if the wastewater is not sufficiently treated. This development has impacts on ecosystems and human health, as well as food security. The United Nations Member States have adopted targets for sustainable development. They include, inter alia, sustainable protection of water quality and sustainable use of water resources. To achieve these goals, appropriate monitoring strategies and the development of indicators for water quality are required. Within the pre-study for a 'World Water Quality Assessment' (WWQA) led by United Nations Environment Programme (UNEP), a methodology for assessing water quality, taking into account the above-mentioned objectives has been developed. The novelty of this methodology is the linked model- and data-driven approach. The focus is on parameters reflecting the key water quality issues, such as increased waste water pollution, salinization or eutrophication. The results from the pre-study show, for example, that already about one seventh of all watercourses in Latin America, Africa and Asia show high organic pollution. This is of central importance for inland fisheries and associated food security. In addition, it could be demonstrated that global water quality databases have large gaps. These must be closed in the future in order to obtain an overall picture of global water quality and to target measures more efficiently. The aim of this presentation is to introduce the methodology developed within the WWQA pre-study and to show selected examples of application in Latin America, Africa and Asia.

Modeled historical land use and land cover for the conterminous United States

USGS Publications Warehouse

Sohl, Terry L.; Reker, Ryan R.; Bouchard, Michelle A.; Sayler, Kristi L.; Dornbierer, Jordan; Wika, Steve; Quenzer, Robert; Friesz, Aaron M.

2016-01-01

The landscape of the conterminous United States has changed dramatically over the last 200 years, with agricultural land use, urban expansion, forestry, and other anthropogenic activities altering land cover across vast swaths of the country. While land use and land cover (LULC) models have been developed to model potential future LULC change, few efforts have focused on recreating historical landscapes. Researchers at the US Geological Survey have used a wide range of historical data sources and a spatially explicit modeling framework to model spatially explicit historical LULC change in the conterminous United States from 1992 back to 1938. Annual LULC maps were produced at 250-m resolution, with 14 LULC classes. Assessment of model results showed good agreement with trends and spatial patterns in historical data sources such as the Census of Agriculture and historical housing density data, although comparison with historical data is complicated by definitional and methodological differences. The completion of this dataset allows researchers to assess historical LULC impacts on a range of ecological processes.

Review of noise in neonatal intensive care units regional analysis

NASA Astrophysics Data System (ADS)

Alvarez Abril, A.; Terrón, A.; Boschi, C.; Gómez, M.

2007-11-01

This work is about the problem of noise in neonatal incubators and in the environment in the neonatal intensive care units. Its main objective is to analyse the impact of noise in hospitals of Mendoza and La Rioja. Methodology: The measures were taken in different moments in front of higher or lower severity level in the working environment. It is shown that noise produces severe damages and changes in the behaviour and the psychological status of the new born babies. Results: The noise recorded inside the incubators and the neonatal intensive care units together have many components but the noise of motors, opening and closing of access gates have been considered the most important ones. Values above 60 db and and up to 120 db in some cases were recorded, so the need to train the health staff in order to manage the new born babies, the equipment and the instruments associated with them very carefully is revealed.

Energy index decomposition methodology at the plant level

NASA Astrophysics Data System (ADS)

Kumphai, Wisit

Scope and method of study. The dissertation explores the use of a high level energy intensity index as a facility-level energy performance monitoring indicator with a goal of developing a methodology for an economically based energy performance monitoring system that incorporates production information. The performance measure closely monitors energy usage, production quantity, and product mix and determines the production efficiency as a part of an ongoing process that would enable facility managers to keep track of and, in the future, be able to predict when to perform a recommissioning process. The study focuses on the use of the index decomposition methodology and explored several high level (industry, sector, and country levels) energy utilization indexes, namely, Additive Log Mean Divisia, Multiplicative Log Mean Divisia, and Additive Refined Laspeyres. One level of index decomposition is performed. The indexes are decomposed into Intensity and Product mix effects. These indexes are tested on a flow shop brick manufacturing plant model in three different climates in the United States. The indexes obtained are analyzed by fitting an ARIMA model and testing for dependency between the two decomposed indexes. Findings and conclusions. The results concluded that the Additive Refined Laspeyres index decomposition methodology is suitable to use on a flow shop, non air conditioned production environment as an energy performance monitoring indicator. It is likely that this research can be further expanded in to predicting when to perform a recommissioning process.

Reliability analysis of repairable systems using Petri nets and vague Lambda-Tau methodology.

PubMed

Garg, Harish

2013-01-01

The main objective of the paper is to developed a methodology, named as vague Lambda-Tau, for reliability analysis of repairable systems. Petri net tool is applied to represent the asynchronous and concurrent processing of the system instead of fault tree analysis. To enhance the relevance of the reliability study, vague set theory is used for representing the failure rate and repair times instead of classical(crisp) or fuzzy set theory because vague sets are characterized by a truth membership function and false membership functions (non-membership functions) so that sum of both values is less than 1. The proposed methodology involves qualitative modeling using PN and quantitative analysis using Lambda-Tau method of solution with the basic events represented by intuitionistic fuzzy numbers of triangular membership functions. Sensitivity analysis has also been performed and the effects on system MTBF are addressed. The methodology improves the shortcomings of the existing probabilistic approaches and gives a better understanding of the system behavior through its graphical representation. The washing unit of a paper mill situated in a northern part of India, producing approximately 200 ton of paper per day, has been considered to demonstrate the proposed approach. The results may be helpful for the plant personnel for analyzing the systems' behavior and to improve their performance by adopting suitable maintenance strategies. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

Attribution of Net Carbon Change by Disturbance Type across Forest Lands of the Continental United States

NASA Astrophysics Data System (ADS)

Hagen, S. C.; Harris, N.; Saatchi, S. S.; Domke, G. M.; Woodall, C. W.; Pearson, T.

2016-12-01

We generated spatially comprehensive maps of carbon stocks and net carbon changes from US forestlands between 2005 and 2010 and attributed the changes to natural and anthropogenic processes. The prototype system created to produce these maps is designed to assist with national GHG inventories and support decisions associated with land management. Here, we present the results and methodological framework of our analysis. In summary, combining estimates of net C losses and gains results in net carbon change of 269±49 Tg C yr-1 (sink) in the coterminous US forest land, with carbon loss from harvest acting as the predominent source process.

Cost Benefit Analysis Modeling Tool for Electric vs. ICE Airport Ground Support Equipment – Development and Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

James Francfort; Kevin Morrow; Dimitri Hochard

2007-02-01

This report documents efforts to develop a computer tool for modeling the economic payback for comparative airport ground support equipment (GSE) that are propelled by either electric motors or gasoline and diesel engines. The types of GSE modeled are pushback tractors, baggage tractors, and belt loaders. The GSE modeling tool includes an emissions module that estimates the amount of tailpipe emissions saved by replacing internal combustion engine GSE with electric GSE. This report contains modeling assumptions, methodology, a user’s manual, and modeling results. The model was developed based on the operations of two airlines at four United States airports.

Comparing Methodologies for Evaluating Emergency Medical Services Ground Transport Access to Time-critical Emergency Services: A Case Study Using Trauma Center Care.

PubMed

Doumouras, Aristithes G; Gomez, David; Haas, Barbara; Boyes, Donald M; Nathens, Avery B

2012-09-01

The regionalization of medical services has resulted in improved outcomes and greater compliance with existing guidelines. For certain "time-critical" conditions intimately associated with emergency medicine, early intervention has demonstrated mortality benefits. For these conditions, then, appropriate triage within a regionalized system at first diagnosis is paramount, ideally occurring in the field by emergency medical services (EMS) personnel. Therefore, EMS ground transport access is an important metric in the ongoing evaluation of a regionalized care system for time-critical emergency services. To our knowledge, no studies have demonstrated how methodologies for calculating EMS ground transport access differ in their estimates of access over the same study area for the same resource. This study uses two methodologies to calculate EMS ground transport access to trauma center care in a single study area to explore their manifestations and critically evaluate the differences between the methodologies. Two methodologies were compared in their estimations of EMS ground transport access to trauma center care: a routing methodology (RM) and an as-the-crow-flies methodology (ACFM). These methodologies were adaptations of the only two methodologies that had been previously used in the literature to calculate EMS ground transport access to time-critical emergency services across the United States. The RM and ACFM were applied to the nine Level I and Level II trauma centers within the province of Ontario by creating trauma center catchment areas at 30, 45, 60, and 120 minutes and calculating the population and area encompassed by the catchments. Because the methodologies were identical for measuring air access, this study looks specifically at EMS ground transport access. Catchments for the province were created for each methodology at each time interval, and their populations and areas were significantly different at all time periods. Specifically, the RM calculated significantly larger populations at every time interval while the ACFM calculated larger catchment area sizes. This trend is counterintuitive (i.e., larger catchment should mean higher populations), and it was found to be most disparate at the shortest time intervals (under 60 minutes). Through critical evaluation of the differences, the authors elucidated that the ACFM could calculate road access in areas with no roads and overestimates access in low-density areas compared to the RM, potentially affecting delivery of care decisions. Based on these results, the authors believe that future methodologies for calculating EMS ground transport access must incorporate a continuous and valid route through the road network as well as use travel speeds appropriate to the road segments traveled; alternatively, we feel that variation in methods for calculating road distances would have little effect on realized access. Overall, as more complex models for calculating EMS ground transport access become used, there needs to be a standard methodology to improve and to compare it to. Based on these findings, the authors believe that this should be the RM. © 2012 by the Society for Academic Emergency Medicine.

Development of action levels for MED/MPD skin-testing units in ultraviolet phototherapy

NASA Astrophysics Data System (ADS)

O'Connor, Una M.; O'Hare, Neil J.

2003-03-01

Ultraviolet (UV) Phototherapy is commonly used for treatment of skin diseases such as psoriasis and eczema. Treatment is carried out using UV phototherapy units, exposing all or part of the body for a certain exposure time. Prior to exposure in treatment units, an unaffected area of skin may be tested using UV skin-testing units in order to determine a suitable treatment regime. The exposure time at which barely perceptible erythema has developed is known as the Minimal Erythemal Dose (MED) for UVB therapy and Minimal Phototoxic Dose (MPD) for UVA therapy. This is used to determine the starting dose in the treatment regime. The presence of 'hotspots' and 'coldspots' in UV skin-testing units can result in inaccurate determination of MED/MPD. This could give rise to severe burns during treatment, or in a sub-optimal dose regime being used. Quality assurance protocols for UV phototherapy equipment have recently been developed and these protocols have highlighted the need for action levels for skin-testing units. An action level is a reference value, which is used to determine whether the difference in irradiance output level across a UV unit is acceptable. Current methodologies for skin-testing in Ireland have been characterised and errors introduced during testing have been estimated. Action levels have been developed based on analysis of errors and requirements of skin-testing.

Geostatistical Modeling of Sediment Abundance in a Heterogeneous Basalt Aquifer at the Idaho National Laboratory, Idaho

USGS Publications Warehouse

Welhan, John A.; Farabaugh, Renee L.; Merrick, Melissa J.; Anderson, Steven R.

2007-01-01

The spatial distribution of sediment in the eastern Snake River Plain aquifer was evaluated and modeled to improve the parameterization of hydraulic conductivity (K) for a subregional-scale ground-water flow model being developed by the U.S. Geological Survey. The aquifer is hosted within a layered series of permeable basalts within which intercalated beds of fine-grained sediment constitute local confining units. These sediments have K values as much as six orders of magnitude lower than the most permeable basalt, and previous flow-model calibrations have shown that hydraulic conductivity is sensitive to the proportion of intercalated sediment. Stratigraphic data in the form of sediment thicknesses from 333 boreholes in and around the Idaho National Laboratory were evaluated as grouped subsets of lithologic units (composite units) corresponding to their relative time-stratigraphic position. The results indicate that median sediment abundances of the stratigraphic units below the water table are statistically invariant (stationary) in a spatial sense and provide evidence of stationarity across geologic time, as well. Based on these results, the borehole data were kriged as two-dimensional spatial data sets representing the sediment content of the layers that discretize the ground-water flow model in the uppermost 300 feet of the aquifer. Multiple indicator kriging (mIK) was used to model the geographic distribution of median sediment abundance within each layer by defining the local cumulative frequency distribution (CFD) of sediment via indicator variograms defined at multiple thresholds. The mIK approach is superior to ordinary kriging because it provides a statistically best estimate of sediment abundance (the local median) drawn from the distribution of local borehole data, independent of any assumption of normality. A methodology is proposed for delineating and constraining the assignment of hydraulic conductivity zones for parameter estimation, based on the locally estimated CFDs and relative kriging uncertainty. A kriging-based methodology improves the spatial resolution of hydraulic property zones that can be considered during parameter estimation and should improve calibration performance and sensitivity by more accurately reflecting the nuances of sediment distribution within the aquifer.

Market definition study of photovoltaic power for remote villages in the United States

NASA Technical Reports Server (NTRS)

Ragsdale, C.; Quashie, P.

1980-01-01

A grass roots evaluation of the market potential was carried out for photovoltaic applications in remote villages in the U. S. and its possessions. An estimate of almost 14 MWp available for conversion from a potential to a real market was defined. The total power potential was based on the energy needs of almost 400 sites reported by Federal agencies and inputs from over 100 Indian tribes. The methodology used, the results achieved, and some recommendations of how to convert this domestic market potential into a real market are detailed.

Space Tug Docking Study. Volume 5: Cost Analysis

NASA Technical Reports Server (NTRS)

1976-01-01

The cost methodology, summary cost data, resulting cost estimates by Work Breakdown Structure (WBS), technical characteristics data, program funding schedules and the WBS for the costing are discussed. Cost estimates for two tasks of the study are reported. The first, developed cost estimates for design, development, test and evaluation (DDT&E) and theoretical first unit (TFU) at the component level (Level 7) for all items reported in the data base. Task B developed total subsystem DDT&E costs and funding schedules for the three candidate Rendezvous and Docking Systems: manual, autonomous, and hybrid.

Lean Methodology Reduces Inappropriate Use of Antipsychotics for Agitation at a Psychiatric Hospital.

PubMed

Goga, Joshana K; Depaolo, Antonio; Khushalani, Sunil; Walters, J Ken; Roca, Robert; Zisselman, Marc; Borleis, Christopher

2017-01-01

To Evaluate the Effects of Applying Lean Methodology-Improving Quality Increasing Efficiency by Eliminating Waste and Reducing Costs-An Approach To Decrease the Prescribing Frequency of Antipsychotics for The Indication of Agitation. Historically Controlled Study. Bheppard Pratt Health System is the Largest Private Provider of Psychiatric Care in Maryland With a Total Bed Capacity of 300. There Were 4 337 Patient Days From November 1 2012 to October 31 2013 on the Dementia Unit. All Patients Admitted on the Dementia Unit Were 65 Years of Age and Older with a Primary Diagnosis of Dementia. our Multidisciplinary Team Used Lean Methodology to Identify the Root Causes and Interventions Necessary to Reduce Inappropriate Antipsychotic Use. The Primary Outcome Was Rate of Inappropriately Indicating Agitation as the Rationale When Prescribing Antipsychotic Medications. There Was a 90% (P < 0.001) Reduction in Rate Of Antipsychotic Prescribing with an Indication of Agitation. The Lean Methodology Interventions Led To A 90% (P < 0.001) Reduction in the Rate of Antipsychotic Prescribing with an Indication of Agitation and a 10% Rate Reduction in Overall Antipsychotic Prescribing. Key Words: Agitation Alzheimer's Antipsychotics Behavioral and Psychological Symptoms of Dementia Centers For Medicare & Medicaid Services Dementia Root-cause Analysis. BPSD = Behavioral and Psychological Symptoms of Dementia CATIE-AD = Clinical Antipsychotic Trials of Intervention Effectiveness in Alzheimer's Disease EMR = Electronic Medical Records GAO = Government Accountability Office GNCIS = Geriatric Neuropsychiatric Clinical Indicator Scale.

ADM1-based methodology for the characterisation of the influent sludge in anaerobic reactors.

PubMed

Huete, E; de Gracia, M; Ayesa, E; Garcia-Heras, J L

2006-01-01

This paper presents a systematic methodology to characterise the influent sludge in terms of the ADM1 components from the experimental measurements traditionally used in wastewater engineering. For this purpose, a complete characterisation of the model components in their elemental mass fractions and charge has been used, making a rigorous mass balance for all the process transformations and enabling the future connection with other unit-process models. It also makes possible the application of mathematical algorithms for the optimal characterisation of several components poorly defined in the ADM1 report. Additionally, decay and disintegration have been necessarily uncoupled so that the decay proceeds directly to hydrolysis instead of producing intermediate composites. The proposed methodology has been applied to the particular experimental work of a pilot-scale CSTR treating real sewage sludge, a mixture of primary and secondary sludge. The results obtained have shown a good characterisation of the influent reflected in good model predictions. However, its limitations for an appropriate prediction of alkalinity and carbon percentages in biogas suggest the convenience of including the elemental characterisation of the process in terms of carbon in the analytical program.

Design, Development and Analysis of Centrifugal Blower

NASA Astrophysics Data System (ADS)

Baloni, Beena Devendra; Channiwala, Salim Abbasbhai; Harsha, Sugnanam Naga Ramannath

2018-06-01

Centrifugal blowers are widely used turbomachines equipment in all kinds of modern and domestic life. Manufacturing of blowers seldom follow an optimum design solution for individual blower. Although centrifugal blowers are developed as highly efficient machines, design is still based on various empirical and semi empirical rules proposed by fan designers. There are different methodologies used to design the impeller and other components of blowers. The objective of present study is to study explicit design methodologies and tracing unified design to get better design point performance. This unified design methodology is based more on fundamental concepts and minimum assumptions. Parametric study is also carried out for the effect of design parameters on pressure ratio and their interdependency in the design. The code is developed based on a unified design using C programming. Numerical analysis is carried out to check the flow parameters inside the blower. Two blowers, one based on the present design and other on industrial design, are developed with a standard OEM blower manufacturing unit. A comparison of both designs is done based on experimental performance analysis as per IS standard. The results suggest better efficiency and more flow rate for the same pressure head in case of the present design compared with industrial one.

Laboratory and field testing of commercial rotational seismometers

USGS Publications Warehouse

Nigbor, R.L.; Evans, J.R.; Hutt, C.R.

2009-01-01

There are a small number of commercially available sensors to measure rotational motion in the frequency and amplitude ranges appropriate for earthquake motions on the ground and in structures. However, the performance of these rotational seismometers has not been rigorously and independently tested and characterized for earthquake monitoring purposes as is done for translational strong- and weak-motion seismometers. Quantities such as sensitivity, frequency response, resolution, and linearity are needed for the understanding of recorded rotational data. To address this need, we, with assistance from colleagues in the United States and Taiwan, have been developing performance test methodologies and equipment for rotational seismometers. In this article the performance testing methodologies are applied to samples of a commonly used commercial rotational seismometer, the eentec model R-1. Several examples were obtained for various test sequences in 2006, 2007, and 2008. Performance testing of these sensors consisted of measuring: (1) sensitivity and frequency response; (2) clip level; (3) self noise and resolution; and (4) cross-axis sensitivity, both rotational and translational. These sensor-specific results will assist in understanding the performance envelope of the R-1 rotational seismometer, and the test methodologies can be applied to other rotational seismometers.

Use of Mobile Devices for English Language Learner Students in the United States: A Research Synthesis

ERIC Educational Resources Information Center

Ok, Min Wook; Ratliffe, Katherine T.

2018-01-01

Mobile devices have become widely used in K-12 education settings for teaching diverse students. We comprehensively reviewed 11 studies published between 2005 and 2016 that examined the use of mobile devices for teaching K-12th grade English language learner students in the United States. We also examined the methodological quality of the studies.…

Nuclear Weapons Sustainment: Improvements Made to Budget Estimates Report, but Opportunities Remain to Further Enhance Transparency

DTIC Science & Technology

2015-12-01

Enhance Transparency Report to Congressional Committees December 2015 GAO-16-23 United States Government Accountability Office United...SUSTAINMENT Improvements Made to Budget Estimates Report, but Opportunities Remain to Further Enhance Transparency Why GAO Did This Study DOD and DOE are...modernization plans and (2) complete, transparent information on the methodologies used to develop those estimates. GAO analyzed the departments

Volume equations for the Northern Research Station's Forest Inventory and Analysis Program as of 2010

Treesearch

Patrick D. Miles; Andrew D. Hill

2010-01-01

The U.S. Forest Service's Forest Inventory and Analysis (FIA) program collects sample plot data on all forest ownerships across the United States. This report documents the methodology used to estimate live-tree gross, net, and sound volume for the 24 States inventoried by the Northern Research Station's (NRS) FIA unit. Sound volume is of particular interest...

An Institutional Case Study of Colleges and Universities Associated with Sea Grant in the Pacific Region of the United States

ERIC Educational Resources Information Center

Herrmann, Adelheid C.

2013-01-01

Purpose: The purpose of this study was to examine fishery degree programs at colleges and universities associated with the Sea Grant program in the Pacific region of the United States and to describe how each addresses protecting, rebuilding, and maintaining healthy oceans. Methodology: The study was a qualitative institutional case study that…

The Effect of the United States Naval Academy Foundation Preparatory Program on the Performance of Naval Academy Midshipmen

DTIC Science & Technology

2004-12-01

final two sections cover the research methods to analyze the performance of USNA Midshipmen. The United States Naval Academy’s Class of 2007 includes... Research Methods for Organizational Studies. Mahwah, New Jersey: Lawrence Erlbaum Associates. SECNAV INSTRUCTION 1531.2A. (1996). U.S. Naval...METHODOLOGY ..............................3 1. Research Questions ............................3 2. Scope .........................................4 3

40 CFR Appendix A to Part 72 - Methodology for Annualization of Emissions Limits

Code of Federal Regulations, 2010 CFR

2010-07-01

... expressed in pounds of SO2 per million British Thermal Unit of heat input (lb/mmBtu) and expressed on an...) than annually. Because of the variability of sulfur in coal and, in some cases, scrubber performance... Not specified 0.93 0.89 At all times 0.93 0.89 Coal unit: No Federal limit or limit unknown 1.00 1.00 ...

24 CFR Appendix to Part 971 - Methodology of Comparing Cost of Public Housing With Cost of Tenant-Based Assistance

Code of Federal Regulations, 2012 CFR

2012-04-01

... bills directly to the utility company, then the development's monthly operating cost per occupied unit... Authority and its affected developments. c. As an example of estimating development operating costs from PHA... divided by 270, the product of 22.5 and 12, to give a cost per unit month of $222. C. Accrual The monthly...

Testing the system detection unit for measuring solid minerals bulk density

NASA Astrophysics Data System (ADS)

Voytyuk, I. N.; Kopteva, A. V.

2017-10-01

The paper provides a brief description of the system for measuring flux per volume of solid minerals via example of mineral coal. The paper discloses the operational principle of the detection unit. The paper provides full description of testing methodology, as well as practical implementation of the detection unit testing. This paper describes the removal of two data arrays via the channel of scattered anddirect radiation for the detection units of two generations. This paper describes Matlab software to determine the statistical characteristics of the studied objects. The mean value of pulses per cycles, and pulse counting inaccuracy relatively the mean value were determined for the calculation of the stability account of the detection units.

Estimation of carbon dioxide emissions per urban center link unit using data collected by the Advanced Traffic Information System in Daejeon, Korea

NASA Astrophysics Data System (ADS)

Ryu, B. Y.; Jung, H. J.; Bae, S. H.; Choi, C. U.

2013-12-01

CO2 emissions on roads in urban centers substantially affect global warming. It is important to quantify CO2 emissions in terms of the link unit in order to reduce these emissions on the roads. Therefore, in this study, we utilized real-time traffic data and attempted to develop a methodology for estimating CO2 emissions per link unit. Because of the recent development of the vehicle-to-infrastructure (V2I) communication technology, data from probe vehicles (PVs) can be collected and speed per link unit can be calculated. Among the existing emission calculation methodologies, mesoscale modeling, which is a representative modeling measurement technique, requires speed and traffic data per link unit. As it is not feasible to install fixed detectors at every link for traffic data collection, in this study, we developed a model for traffic volume estimation by utilizing the number of PVs that can be additionally collected when the PV data are collected. Multiple linear regression and an artificial neural network (ANN) were used for estimating the traffic volume. The independent variables and input data for each model are the number of PVs, travel time index (TTI), the number of lanes, and time slots. The result from the traffic volume estimate model shows that the mean absolute percentage error (MAPE) of the ANN is 18.67%, thus proving that it is more effective. The ANN-based traffic volume estimation served as the basis for the calculation of emissions per link unit. The daily average emissions for Daejeon, where this study was based, were 2210.19 ton/day. By vehicle type, passenger cars accounted for 71.28% of the total emissions. By road, Gyeryongro emitted 125.48 ton/day, accounting for 5.68% of the total emission, the highest percentage of all roads. In terms of emissions per kilometer, Hanbatdaero had the highest emission volume, with 7.26 ton/day/km on average. This study proves that real-time traffic data allow an emissions estimate in terms of the link unit. Furthermore, an analysis of CO2 emissions can support traffic management to make decisions related to the reduction of carbon emissions.

Optimization of controlled processes in combined-cycle plant (new developments and researches)

NASA Astrophysics Data System (ADS)

Tverskoy, Yu S.; Muravev, I. K.

2017-11-01

All modern complex technical systems, including power units of TPP and nuclear power plants, work in the system-forming structure of multifunctional APCS. The development of the modern APCS mathematical support allows bringing the automation degree to the solution of complex optimization problems of equipment heat-mass-exchange processes in real time. The difficulty of efficient management of a binary power unit is related to the need to solve jointly at least three problems. The first problem is related to the physical issues of combined-cycle technologies. The second problem is determined by the criticality of the CCGT operation to changes in the regime and climatic factors. The third problem is related to a precise description of a vector of controlled coordinates of a complex technological object. To obtain a joint solution of this complex of interconnected problems, the methodology of generalized thermodynamic analysis, methods of the theory of automatic control and mathematical modeling are used. In the present report, results of new developments and studies are shown. These results allow improving the principles of process control and the automatic control systems structural synthesis of power units with combined-cycle plants that provide attainable technical and economic efficiency and operational reliability of equipment.

Integrated watershed-scale response to climate change for selected basins across the United States

USGS Publications Warehouse

Markstrom, Steven L.; Hay, Lauren E.; Ward-Garrison, D. Christian; Risley, John C.; Battaglin, William A.; Bjerklie, David M.; Chase, Katherine J.; Christiansen, Daniel E.; Dudley, Robert W.; Hunt, Randall J.; Koczot, Kathryn M.; Mastin, Mark C.; Regan, R. Steven; Viger, Roland J.; Vining, Kevin C.; Walker, John F.

2012-01-01

A study by the U.S. Geological Survey (USGS) evaluated the hydrologic response to different projected carbon emission scenarios of the 21st century using a hydrologic simulation model. This study involved five major steps: (1) setup, calibrate and evaluated the Precipitation Runoff Modeling System (PRMS) model in 14 basins across the United States by local USGS personnel; (2) acquire selected simulated carbon emission scenarios from the World Climate Research Programme's Coupled Model Intercomparison Project; (3) statistical downscaling of these scenarios to create PRMS input files which reflect the future climatic conditions of these scenarios; (4) generate PRMS projections for the carbon emission scenarios for the 14 basins; and (5) analyze the modeled hydrologic response. This report presents an overview of this study, details of the methodology, results from the 14 basin simulations, and interpretation of these results. A key finding is that the hydrological response of the different geographical regions of the United States to potential climate change may be different, depending on the dominant physical processes of that particular region. Also considered is the tremendous amount of uncertainty present in the carbon emission scenarios and how this uncertainty propagates through the hydrologic simulations.

Extension of a nonlinear systems theory to general-frequency unsteady transonic aerodynamic responses

NASA Technical Reports Server (NTRS)

Silva, Walter A.

1993-01-01

A methodology for modeling nonlinear unsteady aerodynamic responses, for subsequent use in aeroservoelastic analysis and design, using the Volterra-Wiener theory of nonlinear systems is presented. The methodology is extended to predict nonlinear unsteady aerodynamic responses of arbitrary frequency. The Volterra-Wiener theory uses multidimensional convolution integrals to predict the response of nonlinear systems to arbitrary inputs. The CAP-TSD (Computational Aeroelasticity Program - Transonic Small Disturbance) code is used to generate linear and nonlinear unit impulse responses that correspond to each of the integrals for a rectangular wing with a NACA 0012 section with pitch and plunge degrees of freedom. The computed kernels then are used to predict linear and nonlinear unsteady aerodynamic responses via convolution and compared to responses obtained using the CAP-TSD code directly. The results indicate that the approach can be used to predict linear unsteady aerodynamic responses exactly for any input amplitude or frequency at a significant cost savings. Convolution of the nonlinear terms results in nonlinear unsteady aerodynamic responses that compare reasonably well with those computed using the CAP-TSD code directly but at significant computational cost savings.

Report: new guidelines for characterization of municipal solid waste: the Portuguese case.

PubMed

da Graça Madeira Martinho, Maria; Silveira, Ana Isabel; Fernandes Duarte Branco, Elsa Maria

2008-10-01

This report proposes a new set of guidelines for the characterization of municipal solid waste. It is based on an analysis of reference methodologies, used internationally, and a case study of Valorsul (a company that handles recovery and treatment of solid waste in the North Lisbon Metropolitan Area). In particular, the suggested guidelines present a new definition of the waste to be analysed, change the sampling unit and establish statistical standards for the results obtained. In these new guidelines, the sampling level is the waste collection vehicle and contamination and moisture are taken into consideration. Finally, focus is on the quality of the resulting data, which is essential for comparability of data between countries. These new guidelines may also be applicable outside Portugal because the methodology includes, besides municipal mixed waste, separately collected fractions of municipal waste. They are a response to the need for information concerning Portugal (e.g. Eurostat or OECD inquiries) and follow European Union municipal solid waste management policies (e.g. packaging waste recovery and recycling targets and the reduction of biodegradable waste going to landfill).

Assessment of ecologic regression in the study of lung cancer and indoor radon.

PubMed

Stidley, C A; Samet, J M

1994-02-01

Ecologic regression studies conducted to assess the cancer risk of indoor radon to the general population are subject to methodological limitations, and they have given seemingly contradictory results. The authors use simulations to examine the effects of two major methodological problems that affect these studies: measurement error and misspecification of the risk model. In a simulation study of the effect of measurement error caused by the sampling process used to estimate radon exposure for a geographic unit, both the effect of radon and the standard error of the effect estimate were underestimated, with greater bias for smaller sample sizes. In another simulation study, which addressed the consequences of uncontrolled confounding by cigarette smoking, even small negative correlations between county geometric mean annual radon exposure and the proportion of smokers resulted in negative average estimates of the radon effect. A third study considered consequences of using simple linear ecologic models when the true underlying model relation between lung cancer and radon exposure is nonlinear. These examples quantify potential biases and demonstrate the limitations of estimating risks from ecologic studies of lung cancer and indoor radon.

Analysis of radiation exposure for naval units of Operation Crossroads. Volume 3. (Appendix B) support ships. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weitz, R.; Thomas, C.; Klemm, J.

1982-03-03

External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details themore » results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.« less

Analysis of radiation exposure for naval units of Operation Crossroads. Volume 2. (Appendix A) target ships. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weitz, R.; Thomas, C.; Klemm, J.

1982-03-03

External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details themore » results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those, approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.« less

The application of item response theory in developing and validating a shortened version of the Emirate Marital Satisfaction Scale.

PubMed

Dodeen, Hamzeh; Al-Darmaki, Fatima

2016-12-01

The aim of this study was to determine the feasibility of generating a shorter version of the Emirati Marital Satisfaction Scale (EMSS) using item response theory (IRT)-based methodology. The EMSS is the first national scale used to provide an understanding of the family function and level of marital satisfaction within the cultural context of the United Arab Emirates. A sample of 1,049 Emirati married individuals from different ages, genders, places of residence, and monthly incomes participated in this study. The IRT was calibrated using X-Calibre 4.2 and the graded response model. The analysis was developed on the basis of a short form of the EMSS (7 items), which constitutes a promising alternative to the original scale for practitioners and researchers. This short version is reliable, valid, and it gives results very similar to the original scale. The results of this study confirmed the usefulness of IRT-based methodology for developing psychological and counseling scales. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Statistical flaws in design and analysis of fertility treatment studies on cryopreservation raise doubts on the conclusions

PubMed Central

van Gelder, P.H.A.J.M.; Nijs, M.

2011-01-01

Decisions about pharmacotherapy are being taken by medical doctors and authorities based on comparative studies on the use of medications. In studies on fertility treatments in particular, the methodological quality is of utmost importance in the application of evidence-based medicine and systematic reviews. Nevertheless, flaws and omissions appear quite regularly in these types of studies. Current study aims to present an overview of some of the typical statistical flaws, illustrated by a number of example studies which have been published in peer reviewed journals. Based on an investigation of eleven studies at random selected on fertility treatments with cryopreservation, it appeared that the methodological quality of these studies often did not fulfil the required statistical criteria. The following statistical flaws were identified: flaws in study design, patient selection, and units of analysis or in the definition of the primary endpoints. Other errors could be found in p-value and power calculations or in critical p-value definitions. Proper interpretation of the results and/or use of these study results in a meta analysis should therefore be conducted with care. PMID:24753877

Statistical flaws in design and analysis of fertility treatment -studies on cryopreservation raise doubts on the conclusions.

PubMed

van Gelder, P H A J M; Nijs, M

2011-01-01

Decisions about pharmacotherapy are being taken by medical doctors and authorities based on comparative studies on the use of medications. In studies on fertility treatments in particular, the methodological quality is of utmost -importance in the application of evidence-based medicine and systematic reviews. Nevertheless, flaws and omissions appear quite regularly in these types of studies. Current study aims to present an overview of some of the typical statistical flaws, illustrated by a number of example studies which have been published in peer reviewed journals. Based on an investigation of eleven studies at random selected on fertility treatments with cryopreservation, it appeared that the methodological quality of these studies often did not fulfil the -required statistical criteria. The following statistical flaws were identified: flaws in study design, patient selection, and units of analysis or in the definition of the primary endpoints. Other errors could be found in p-value and power calculations or in critical p-value definitions. Proper -interpretation of the results and/or use of these study results in a meta analysis should therefore be conducted with care.

Bayesian network meta-analysis for cluster randomized trials with binary outcomes.

PubMed

Uhlmann, Lorenz; Jensen, Katrin; Kieser, Meinhard

2017-06-01

Network meta-analysis is becoming a common approach to combine direct and indirect comparisons of several treatment arms. In recent research, there have been various developments and extensions of the standard methodology. Simultaneously, cluster randomized trials are experiencing an increased popularity, especially in the field of health services research, where, for example, medical practices are the units of randomization but the outcome is measured at the patient level. Combination of the results of cluster randomized trials is challenging. In this tutorial, we examine and compare different approaches for the incorporation of cluster randomized trials in a (network) meta-analysis. Furthermore, we provide practical insight on the implementation of the models. In simulation studies, it is shown that some of the examined approaches lead to unsatisfying results. However, there are alternatives which are suitable to combine cluster randomized trials in a network meta-analysis as they are unbiased and reach accurate coverage rates. In conclusion, the methodology can be extended in such a way that an adequate inclusion of the results obtained in cluster randomized trials becomes feasible. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Application of activity-based costing (ABC) for a Peruvian NGO healthcare provider.

PubMed

Waters, H; Abdallah, H; Santillán, D

2001-01-01

This article describes the application of activity-based costing (ABC) to calculate the unit costs of the services for a health care provider in Peru. While traditional costing allocates overhead and indirect costs in proportion to production volume or to direct costs, ABC assigns costs through activities within an organization. ABC uses personnel interviews to determine principal activities and the distribution of individual's time among these activities. Indirect costs are linked to services through time allocation and other tracing methods, and the result is a more accurate estimate of unit costs. The study concludes that applying ABC in a developing country setting is feasible, yielding results that are directly applicable to pricing and management. ABC determines costs for individual clinics, departments and services according to the activities that originate these costs, showing where an organization spends its money. With this information, it is possible to identify services that are generating extra revenue and those operating at a loss, and to calculate cross subsidies across services. ABC also highlights areas in the health care process where efficiency improvements are possible. Conclusions about the ultimate impact of the methodology are not drawn here, since the study was not repeated and changes in utilization patterns and the addition of new clinics affected applicability of the results. A potential constraint to implementing ABC is the availability and organization of cost information. Applying ABC efficiently requires information to be readily available, by cost category and department, since the greatest benefits of ABC come from frequent, systematic application of the methodology in order to monitor efficiency and provide feedback for management. The article concludes with a discussion of the potential applications of ABC in the health sector in developing countries.

Using grounded theory methodology to conceptualize the mother-infant communication dynamic: potential application to compliance with infant feeding recommendations.

PubMed

Waller, Jennifer; Bower, Katherine M; Spence, Marsha; Kavanagh, Katherine F

2015-10-01

Excessive, rapid weight gain in early infancy has been linked to risk of later overweight and obesity. Inappropriate infant feeding practices associated with this rapid weight gain are currently of great interest. Understanding the origin of these practices may increase the effectiveness of interventions. Low-income populations in the Southeastern United States are at increased risk for development of inappropriate infant feeding practices, secondary to the relatively low rates of breastfeeding reported from this region. The objective was to use grounded theory methodology (GTM) to explore interactions between mothers and infants that may influence development of feeding practices, and to do so among low-income, primiparous, Southeastern United States mothers. Analysis of 15 in-depth phone interviews resulted in development of a theoretical model in which Mother-Infant Communication Dynamic emerged as the central concept. The central concept suggests a communication pattern developed over the first year of life, based on a positive feedback loop, which is harmonious and results in the maternal perception of mother and infant now speaking the same language. Importantly, though harmonious, this dynamic may result from inaccurate maternal interpretation of infant cues and behaviours, subsequently leading to inappropriate infant feeding practices. Future research should test this theoretical model using direct observation of mother-infant communication, to increase the understanding of maternal interpretation of infant cues. Subsequently, interventions targeting accurate maternal interpretation of and response to infant cues, and impact on rate of infant weight gain could be tested. If effective, health care providers could potentially use these concepts to attenuate excess rapid infant weight gain. © 2013 John Wiley & Sons Ltd.

78 FR 20141 - Agency Information Collection Activities; Proposed Collection; Comments Requested: National Drug...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

..., Domestic Strategic Intelligence Unit, Office of Intelligence, Warning, Plans and Programs, Drug Enforcement... proposed collection of information, including the validity of the methodology and assumptions used; Enhance...

22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

Code of Federal Regulations, 2012 CFR

2012-04-01

... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

Code of Federal Regulations, 2011 CFR

2011-04-01

... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

Code of Federal Regulations, 2014 CFR

2014-04-01

... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

Code of Federal Regulations, 2010 CFR

2010-04-01

... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

Code of Federal Regulations, 2013 CFR

2013-04-01

... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

GREENSCOPE Technical User’s Guide

EPA Pesticide Factsheets

GREENSCOPE’s methodology has been developed and its software tool designed such that it can be applied to an entire process, to a piece of equipment or process unit, or at the investigatory bench scale.

Creating a future worth experiencing: nursing strategic planning in an integrated healthcare delivery system.

PubMed

Drenkard, K N

2001-01-01

The application of a strategic planning methodology for the discipline of nursing is described in use by a large, nonprofit integrated healthcare system. The methodology uses a transformational leadership assessment tool, quality planning methods, and large group intervention to engage nurses in the implementation of strategies. Based on systems theory, the methodology outlined by the author has application at any level in an organization, from an entire delivery network, to a patient care unit. The author discusses getting started on a strategic planning journey, tools that are useful in the process, integrating already existing business plans into the strategies for nursing, preliminary measures to monitor progress, and lessons learned along the journey.

Application of the Spanish methodological approach for biosphere assessment to a generic high-level waste disposal site.

PubMed

Agüero, A; Pinedo, P; Simón, I; Cancio, D; Moraleda, M; Trueba, C; Pérez-Sánchez, D

2008-09-15

A methodological approach which includes conceptual developments, methodological aspects and software tools have been developed in the Spanish context, based on the BIOMASS "Reference Biospheres Methodology". The biosphere assessments have to be undertaken with the aim of demonstrating compliance with principles and regulations established to limit the possible radiological impact of radioactive waste disposals on human health and on the environment, and to ensure that future generations will not be exposed to higher radiation levels than those that would be acceptable today. The biosphere in the context of high-level waste disposal is defined as the collection of various radionuclide transfer pathways that may result in releases into the surface environment, transport within and between the biosphere receptors, exposure of humans and biota, and the doses/risks associated with such exposures. The assessments need to take into account the complexity of the biosphere, the nature of the radionuclides released and the long timescales considered. It is also necessary to make assumptions related to the habits and lifestyle of the exposed population, human activities in the long term and possible modifications of the biosphere. A summary on the Spanish methodological approach for biosphere assessment are presented here as well as its application in a Spanish generic case study. A reference scenario has been developed based on current conditions at a site located in Central-West Spain, to indicate the potential impact to the actual population. In addition, environmental change has been considered qualitatively through the use of interaction matrices and transition diagrams. Unit source terms of (36)Cl, (79)Se, (99)Tc, (129)I, (135)Cs, (226)Ra, (231)Pa, (238)U, (237)Np and (239)Pu have been taken. Two exposure groups of infants and adults have been chosen for dose calculations. Results are presented and their robustness is evaluated through the use of uncertainty and sensitivity analyses.

Methodology of the Westinghouse dynamic rod worth measurement technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chao, Y.A.; Chapman, D.M.; Easter, M.E.

1992-01-01

During zero-power physics testing, plant operations personnel use one of various techniques to measure the reactivity worth of the control rods to confirm shutdown margin. A simple and fast procedure for measuring rod worths called dynamic rod worth measurement (DRWM) has been developed at Westinghouse. This procedure was tested at the recent startups of Point Beach Nuclear Power Plant Unit 1 cycle 20 and Unit 2 cycle 18. The results of these tests show that DRWM measures rod worths with accuracy comparable to that of both boron dilution and rod bank exchange measurements. The DRWM procedure is a fast processmore » of measuring the reactivity worth of individual banks by inserting and withdrawing the bank continuously at the maximum stepping speed without changing the boron concentration and recording the signals of the ex-core detectors.« less

Incorporating online teaching in an introductory pharmaceutical practice course: a study of student perceptions within an Australian University.

PubMed

Benino, Diana; Girardi, Antonia; Czarniak, Petra

2011-10-01

To examine student perceptions regarding online lectures and quizzes undertaken during a pharmaceutical practice course for first year undergraduate students enrolled in the Bachelor of Pharmacy course at an Australian University. The University uses a standard instrument to collect feedback from students regarding unit satisfaction. Data were collected for three different teaching modalities: traditional face-to-face, online and partially online. Descriptive statistics support that, from a student's perspective, partial online delivery is the preferred teaching methodology for an introductory pharmaceutical practice unit. This study has served to highlight that while there are a few points of significant difference between traditional and online teaching and learning, a combination of the two provides a reasonable avenue for teaching exploration. This result has implications for teaching practice generally, and within the pharmacy discipline, specifically.

Graphics Processing Unit Assisted Thermographic Compositing

NASA Technical Reports Server (NTRS)

Ragasa, Scott; McDougal, Matthew; Russell, Sam

2012-01-01

Objective: To develop a software application utilizing general purpose graphics processing units (GPUs) for the analysis of large sets of thermographic data. Background: Over the past few years, an increasing effort among scientists and engineers to utilize the GPU in a more general purpose fashion is allowing for supercomputer level results at individual workstations. As data sets grow, the methods to work them grow at an equal, and often great, pace. Certain common computations can take advantage of the massively parallel and optimized hardware constructs of the GPU to allow for throughput that was previously reserved for compute clusters. These common computations have high degrees of data parallelism, that is, they are the same computation applied to a large set of data where the result does not depend on other data elements. Signal (image) processing is one area were GPUs are being used to greatly increase the performance of certain algorithms and analysis techniques. Technical Methodology/Approach: Apply massively parallel algorithms and data structures to the specific analysis requirements presented when working with thermographic data sets.

Ultrasound effects on the degradation kinetics, structure, and antioxidant activity of sea cucumber fucoidan.

PubMed

Guo, Xin; Ye, Xingqian; Sun, Yujing; Wu, Dan; Wu, Nian; Hu, Yaqin; Chen, Shiguo

2014-02-05

The effects of ultrasound on the molecular weight, structure, and antioxidant potential of a fucoidan found in Isostichopus badionotus were investigated. The results showed the molecular weight (Mw) of fucoidan decreased obviously after ultrasound treatment. Higher ultrasonic intensity, lower temperature, and lower fucoidan concentrations led to a more effective sonochemical effect. The kinetic model for fucoidan degradation fitted to 1/M(wt)-1/M(w0) = kt at the tested temperature. The optimized degradation conditions by response surface methodology (RSM) were temperature, 12 °C, and intensity, 508 W/cm². Structural analysis by FTIR and NMR indicated the fucoidan kept the linear tetrasaccharide repeating units as the original polysaccharides after the ultrasound treatment, with only slight destruction of the middle nonsulfated fucose units. Antioxidant activity assay showed the antioxidant activity was slightly improved by the ultrasound treatment. The results suggested that ultrasound treatment is an effective approach to decrease the M(w) of fucoidan with only minor structural destruction.

Analytical Methodology Used To Assess/Refine Observatory Thermal Vacuum Test Conditions For the Landsat 8 Data Continuity Mission

NASA Technical Reports Server (NTRS)

Fantano, Louis

2015-01-01

Thermal and Fluids Analysis Workshop Silver Spring, MD NCTS 21070-15 The Landsat 8 Data Continuity Mission, which is part of the United States Geologic Survey (USGS), launched February 11, 2013. A Landsat environmental test requirement mandated that test conditions bound worst-case flight thermal environments. This paper describes a rigorous analytical methodology applied to assess refine proposed thermal vacuum test conditions and the issues encountered attempting to satisfy this requirement.

National Water Quality Laboratory - A Profile

USGS Publications Warehouse

Raese, Jon W.

2001-01-01

The U.S. Geological Survey (USGS) National Water Quality Laboratory (NWQL) is a full-service laboratory that specializes in environmental analytical chemistry. The NWQL's primary mission is to support USGS programs requiring environmental analyses that provide consistent methodology for national assessment and trends analysis. The NWQL provides the following: high-quality chemical data; consistent, published, state-of-the-art methodology; extremely low-detection levels; high-volume capability; biological unit for identifying benthic invertebrates; quality assurance for determining long-term water-quality trends; and a professional staff.

Use of lean and six sigma methodology to improve operating room efficiency in a high-volume tertiary-care academic medical center.

PubMed

Cima, Robert R; Brown, Michael J; Hebl, James R; Moore, Robin; Rogers, James C; Kollengode, Anantha; Amstutz, Gwendolyn J; Weisbrod, Cheryl A; Narr, Bradly J; Deschamps, Claude

2011-07-01

Operating rooms (ORs) are resource-intense and costly hospital units. Maximizing OR efficiency is essential to maintaining an economically viable institution. OR efficiency projects often focus on a limited number of ORs or cases. Efforts across an entire OR suite have not been reported. Lean and Six Sigma methodologies were developed in the manufacturing industry to increase efficiency by eliminating non-value-added steps. We applied Lean and Six Sigma methodologies across an entire surgical suite to improve efficiency. A multidisciplinary surgical process improvement team constructed a value stream map of the entire surgical process from the decision for surgery to discharge. Each process step was analyzed in 3 domains, ie, personnel, information processed, and time. Multidisciplinary teams addressed 5 work streams to increase value at each step: minimizing volume variation; streamlining the preoperative process; reducing nonoperative time; eliminating redundant information; and promoting employee engagement. Process improvements were implemented sequentially in surgical specialties. Key performance metrics were collected before and after implementation. Across 3 surgical specialties, process redesign resulted in substantial improvements in on-time starts and reduction in number of cases past 5 pm. Substantial gains were achieved in nonoperative time, staff overtime, and ORs saved. These changes resulted in substantial increases in margin/OR/day. Use of Lean and Six Sigma methodologies increased OR efficiency and financial performance across an entire operating suite. Process mapping, leadership support, staff engagement, and sharing performance metrics are keys to enhancing OR efficiency. The performance gains were substantial, sustainable, positive financially, and transferrable to other specialties. Copyright © 2011 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Systematic review and quality assessment of cost-effectiveness analysis of pharmaceutical therapies for advanced colorectal cancer.

PubMed

Leung, Henry W C; Chan, Agnes L F; Leung, Matthew S H; Lu, Chin-Li

2013-04-01

To systematically review and assess the quality of cost-effectiveness analyses (CEAs) of pharmaceutical therapies for metastatic colorectal cancer (mCRC). The MEDLINE, EMBASE, Cochrane, and EconLit databases were searched for the Medical Subject Headings or text key words quality-adjusted, QALY, life-year gained (LYG), and cost-effectiveness (January 1, 1999-December 31, 2009). Original CEAs of mCRC pharmacotherapy published in English were included. CEAs that measured health effects in units other than quality-adjusted life years or LYG and letters to the editor, case reports, posters, and editorials were excluded. Each article was independently assessed by 2 trained reviewers according to a quality checklist created by the Panel on Cost-Effectiveness in Health and Medicine. Twenty-four CEA studies pertaining to pharmaceutical therapies for mCRC were identified. All studies showed a wide variation in methodologic approaches, which resulted in a different range of incremental cost-effectiveness ratios reported for each regimen. We found common methodologic flaws in a significant number of CEA studies, including lack of clear description for critique of data quality; lack of method for adjusting costs for inflation and methods for obtaining expert judgment; no results of model validation; wide differences in the types of perspective, time horizon, study design, cost categories, and effect outcomes; and no quality assessment of data (cost and effectiveness) for the interventions evaluation. This study has shown a wide variation in the methodology and quality of cost-effectiveness analysis for mCRC. Improving quality and harmonization of CEA for cancer treatment is needed. Further study is suggested to assess the quality of CEA methodology outside the mCRC disease state.

Mathematical simulation of power conditioning systems. Volume 1: Simulation of elementary units. Report on simulation methodology

NASA Technical Reports Server (NTRS)

Prajous, R.; Mazankine, J.; Ippolito, J. C.

1978-01-01

Methods and algorithms used for the simulation of elementary power conditioning units buck, boost, and buck-boost, as well as shunt PWM are described. Definitions are given of similar converters and reduced parameters. The various parts of the simulation to be carried out are dealt with; local stability, corrective network, measurements of input-output impedance and global stability. A simulation example is given.

Cavity Detection and Delineation Research. Report 4. Microgravimetric Survey: Manatee Springs Site, Florida.

DTIC Science & Technology

1983-03-01

RESEARCH Title Author S Report 1: Mlcoravirmetrlc and Magnetic Surveys: Medford Cave Dwain K~ Sufer Sit Florida Report 2: Seismic Methodology. Medford...ERORMNGORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASKS. PRFORINGAREA & WORK UNIT NUMBERS U. S. Army Engineer Waterways Experiment...Station *Geotechnical Laboratory CWIS Work Unit 31150 * P.O. Box 631, Vicksburg, Miss. 39180 11. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE

A Methodology for Implementing the Department of Defense’s Current In-Sourcing Policy

DTIC Science & Technology

2011-01-01

Riposo, Irv Blickstein, Stephanie Young , Geoffrey McGovern, Brian McInnis Prepared for the United States Navy Approved for public release; distribution... Keating for their thoughtful reviews of the draft manuscript. xv Abbreviations 2009 NDAA Duncan Hunter National Defense Authorization Act for Fiscal...some action by contract, policy, regulation, authorization, order, or otherwise; • determine, protect, and advance United States economic , political

The use of sacred story in a psychiatry spirituality group.

PubMed

Kidd, R A; Maripolsky, V; Smith, P P

2001-01-01

Describes the philosophy and methodology for using sacred stories from several religious traditions with psychiatric patients. Notes how chaplains are integrated into a psychiatric unit's interdisciplinary team. Details how sacred stories are selected for use in a spirituality group, how patients are screened for participation, and how the group is facilitated. Demonstrates the benefit and value patients and staff derive from a spirituality group on a psychiatric unit.

Report to the President of the United States on Sexual Assault Prevention and Response

DTIC Science & Technology

2014-11-01

established research history based on laboratory- tested principles of memory retrieval, knowledge representation, and communication. AFOSI has been using CI...analysis methods, including scientific research , data analysis, focus groups , and on -site assessments to evaluate the Department’s SAPR program...131 Report to the President of the United States on SAPR DMDC’s focus group methodology employs a standard qualitative research approach to

Workforce Projections 2010-2020: Annual Supply and Demand Forecasting Models for Physical Therapists Across the United States.

PubMed

Landry, Michel D; Hack, Laurita M; Coulson, Elizabeth; Freburger, Janet; Johnson, Michael P; Katz, Richard; Kerwin, Joanne; Smith, Megan H; Wessman, Henry C Bud; Venskus, Diana G; Sinnott, Patricia L; Goldstein, Marc

2016-01-01

Health human resources continue to emerge as a critical health policy issue across the United States. The purpose of this study was to develop a strategy for modeling future workforce projections to serve as a basis for analyzing annual supply of and demand for physical therapists across the United States into 2020. A traditional stock-and-flow methodology or model was developed and populated with publicly available data to produce estimates of supply and demand for physical therapists by 2020. Supply was determined by adding the estimated number of physical therapists and the approximation of new graduates to the number of physical therapists who immigrated, minus US graduates who never passed the licensure examination, and an estimated attrition rate in any given year. Demand was determined by using projected US population with health care insurance multiplied by a demand ratio in any given year. The difference between projected supply and demand represented a shortage or surplus of physical therapists. Three separate projection models were developed based on best available data in the years 2011, 2012, and 2013, respectively. Based on these projections, demand for physical therapists in the United States outstrips supply under most assumptions. Workforce projection methodology research is based on assumptions using imperfect data; therefore, the results must be interpreted in terms of overall trends rather than as precise actuarial data-generated absolute numbers from specified forecasting. Outcomes of this projection study provide a foundation for discussion and debate regarding the most effective and efficient ways to influence supply-side variables so as to position physical therapists to meet current and future population demand. Attrition rates or permanent exits out of the profession can have important supply-side effects and appear to have an effect on predicting future shortage or surplus of physical therapists. © 2016 American Physical Therapy Association.

Regional variability in the accuracy of statistical reproductions of historical time series of daily streamflow at ungaged locations

NASA Astrophysics Data System (ADS)

Farmer, W. H.; Archfield, S. A.; Over, T. M.; Kiang, J. E.

2015-12-01

In the United States and across the globe, the majority of stream reaches and rivers are substantially impacted by water use or remain ungaged. The result is large gaps in the availability of natural streamflow records from which to infer hydrologic understanding and inform water resources management. From basin-specific to continent-wide scales, many efforts have been undertaken to develop methods to estimate ungaged streamflow. This work applies and contrasts several statistical models of daily streamflow to more than 1,700 reference-quality streamgages across the conterminous United States using a cross-validation methodology. The variability of streamflow simulation performance across the country exhibits a pattern familiar to other continental scale modeling efforts performed for the United States. For portions of the West Coast and the dense, relatively homogeneous and humid regions of the eastern United States models produce reliable estimates of daily streamflow using many different prediction methods. Model performance for the middle portion of the United States, marked by more heterogeneous and arid conditions, and with larger contributing areas and sparser networks of streamgages, is consistently poor. A discussion of the difficulty of statistical interpolation and regionalization in these regions raises additional questions of data availability and quality, hydrologic process representation and dominance, and intrinsic variability.

Methodologies for processing plant material into acceptable food on a small scale

NASA Technical Reports Server (NTRS)

Parks, Thomas R.; Bindon, John N.; Bowles, Anthony J. G.; Golbitz, Peter; Lampi, Rauno A.; Marquardt, Robert F.

1994-01-01

Based on the Controlled Environment Life Support System (CELSS) production of only four crops, wheat, white potatoes, soybeans, and sweet potatoes; a crew size of twelve; a daily planting/harvesting regimen; and zero-gravity conditions, estimates were made on the quantity of food that would need to be grown to provide adequate nutrition; and the corresponding amount of biomass that would result. Projections were made of the various types of products that could be made from these crops, the unit operations that would be involved, and what menu capability these products could provide. Equipment requirements to perform these unit operations were screened to identify commercially available units capable of operating (or being modified to operate) under CELSS/zero-gravity conditions. Concept designs were developed for those equipment needs for which no suitable units were commercially available. Prototypes of selected concept designs were constructed and tested on a laboratory scale, as were selected commercially available units. This report discusses the practical considerations taken into account in the various design alternatives, some of the many product/process factors that relate to equipment development, and automation alternatives. Recommendations are made on both general and specific areas in which it was felt additional investigation would benefit CELSS missions.

Hierarchical calibration and validation of computational fluid dynamics models for solid sorbent-based carbon capture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lai, Canhai; Xu, Zhijie; Pan, Wenxiao

2016-01-01

To quantify the predictive confidence of a solid sorbent-based carbon capture design, a hierarchical validation methodology—consisting of basic unit problems with increasing physical complexity coupled with filtered model-based geometric upscaling has been developed and implemented. This paper describes the computational fluid dynamics (CFD) multi-phase reactive flow simulations and the associated data flows among different unit problems performed within the said hierarchical validation approach. The bench-top experiments used in this calibration and validation effort were carefully designed to follow the desired simple-to-complex unit problem hierarchy, with corresponding data acquisition to support model parameters calibrations at each unit problem level. A Bayesianmore » calibration procedure is employed and the posterior model parameter distributions obtained at one unit-problem level are used as prior distributions for the same parameters in the next-tier simulations. Overall, the results have demonstrated that the multiphase reactive flow models within MFIX can be used to capture the bed pressure, temperature, CO2 capture capacity, and kinetics with quantitative accuracy. The CFD modeling methodology and associated uncertainty quantification techniques presented herein offer a solid framework for estimating the predictive confidence in the virtual scale up of a larger carbon capture device.« less

GIS applied to location of fires detection towers in domain area of tropical forest.

PubMed

Eugenio, Fernando Coelho; Rosa Dos Santos, Alexandre; Fiedler, Nilton Cesar; Ribeiro, Guido Assunção; da Silva, Aderbal Gomes; Juvanhol, Ronie Silva; Schettino, Vitor Roberto; Marcatti, Gustavo Eduardo; Domingues, Getúlio Fonseca; Alves Dos Santos, Gleissy Mary Amaral Dino; Pezzopane, José Eduardo Macedo; Pedra, Beatriz Duguy; Banhos, Aureo; Martins, Lima Deleon

2016-08-15

In most countries, the loss of biodiversity caused by the fires is worrying. In this sense, the fires detection towers are crucial for rapid identification of fire outbreaks and can also be used in environmental inspection, biodiversity monitoring, telecommunications mechanisms, telemetry and others. Currently the methodologies for allocating fire detection towers over large areas are numerous, complex and non-standardized by government supervisory agencies. Therefore, this study proposes and evaluates different methodologies to best location of points to install fire detection towers considering the topography, risk areas, conservation units and heat spots. Were used Geographic Information Systems (GIS) techniques and unaligned stratified systematic sampling for implementing and evaluating 9 methods for allocating fire detection towers. Among the methods evaluated, the C3 method was chosen, represented by 140 fire detection towers, with coverage of: a) 67% of the study area, b) 73.97% of the areas with high risk, c) 70.41% of the areas with very high risk, d) 70.42% of the conservation units and e) 84.95% of the heat spots in 2014. The proposed methodology can be adapted to areas of other countries. Copyright © 2016 Elsevier B.V. All rights reserved.

Watershed-scale response to climate change through the twenty-first century for selected basins across the United States

USGS Publications Warehouse

Hay, Lauren E.; Markstrom, Steven; Ward-Garrison, Christian D.

2011-01-01

The hydrologic response of different climate-change emission scenarios for the twenty-first century were evaluated in 14 basins from different hydroclimatic regions across the United States using the Precipitation-Runoff Modeling System (PRMS), a process-based, distributed-parameter watershed model. This study involves four major steps: 1) setup and calibration of the PRMS model in 14 basins across the United States by local U.S. Geological Survey personnel; 2) statistical downscaling of the World Climate Research Programme’s Coupled Model Intercomparison Project phase 3 climate-change emission scenarios to create PRMS input files that reflect these emission scenarios; 3) run PRMS for the climate-change emission scenarios for the 14 basins; and 4) evaluation of the PRMS output.This paper presents an overview of this project, details of the methodology, results from the 14 basin simulations, and interpretation of these results. A key finding is that the hydrological response of the different geographical regions of the United States to potential climate change may be very different, depending on the dominant physical processes of that particular region. Also considered is the tremendous amount of uncertainty present in the climate emission scenarios and how this uncertainty propagates through the hydrologic simulations. This paper concludes with a discussion of the lessons learned and potential for future work.

Carbon abatement via treating the solid waste from the Australian olive industry in mobile pyrolysis units: LCA with uncertainty analysis.

PubMed

El Hanandeh, Ali

2013-04-01

The olive oil industry in Australia has been growing at a rapid rate over the past decade. It is forecast to continue growing due to the steady increase in demand for olive oil and olive products in the local and regional market. However, the olive oil extraction process generates large amounts of solid waste called olive husk which is currently underutilized. This paper uses life-cycle methodology to analyse the carbon emission reduction potential of utilizing olive husk as a feedstock in a mobile pyrolysis unit. Four scenarios, based on different combinations of pyrolysis technologies (slow versus fast) and end-use of products (land application versus energy utilization), are constructed. The performance of each scenario under conditions of uncertainty was also investigated. The results show that all scenarios result in significant carbon emission abatement. Processing olive husk in mobile fast pyrolysis units and the utilization of bio-oil and biochar as substitutes for heavy fuel oil and coal is likely to realize a carbon offset greater than 32.3 Gg CO2-eq annually in 90% of the time. Likewise, more than 3.2 Gg-C (11.8 Gg CO2-eq) per year could be sequestered in the soil in the form of fixed carbon if slow mobile pyrolysis units were used to produce biochar.

40 CFR 72.42 - Phase I extension plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

... consistent with the data filed on EIA form 767 for those years and the conversion methodology specified in... of fossil fuels (before any treatment prior to combustion) that will be used at the control unit...

40 CFR 72.42 - Phase I extension plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... consistent with the data filed on EIA form 767 for those years and the conversion methodology specified in... of fossil fuels (before any treatment prior to combustion) that will be used at the control unit...

40 CFR 72.42 - Phase I extension plans.

Code of Federal Regulations, 2014 CFR

2014-07-01

... consistent with the data filed on EIA form 767 for those years and the conversion methodology specified in... of fossil fuels (before any treatment prior to combustion) that will be used at the control unit...

40 CFR 72.42 - Phase I extension plans.

Code of Federal Regulations, 2013 CFR

2013-07-01

... consistent with the data filed on EIA form 767 for those years and the conversion methodology specified in... of fossil fuels (before any treatment prior to combustion) that will be used at the control unit...

40 CFR 72.42 - Phase I extension plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... consistent with the data filed on EIA form 767 for those years and the conversion methodology specified in... of fossil fuels (before any treatment prior to combustion) that will be used at the control unit...

Valuing public sector risk exposure in transportation public-private partnerships.

DOT National Transportation Integrated Search

2010-10-01

This report presents a methodological framework to evaluate public sector financial risk exposure when : delivering transportation infrastructure through public-private partnership (PPP) agreements in the United : States (U.S.). The framework is base...

Research notes : keeping bridges strong and handsome.

DOT National Transportation Integrated Search

1999-07-01

ODOT Research Unit, in collaboration with Oregon State University (OSU), are continuing to study fiber-reinforced polymer (FRP) materials as a cost-effective, structurally sound methodology for upgrading bridges. The decision to use this approach was...

The use of network analysis in the process of delimitation as exemplifi ed by the administrative division of Poland

NASA Astrophysics Data System (ADS)

Borowska-Stefańska, Marta; Wiśniewski, Szymon

2017-12-01

The cognitive aim of this study is to point to the optimum number of local government units and the optimum boundaries of spatial units in Poland with the assumption of minimizing the cumulated theoretical travel time to all settlement units in the country. The methodological aim, in turn, is to present the use of the ArcGIS location-allocation tool for the purposes of delimitation processes as exemplifi ed by administrative boundaries in Poland. The rationale for the implementation of this study is that number and the boundaries of units of all levels of Poland's current territorial division are far from optimum in the light of minimization of accumulated theoretical travel time to all settlement units in the country. It may be concluded that it would be justifi able to increase the number of voivodships from the current number of 16 to 18. Besides it would be necessary to introduce modifi cations in relation to units with regional functions. In contrast, the number of districts and communes should be reduced. A continuation of this research may go in the direction of including analysis of public transport network in the research, creating in this way a multimodal set of network data. This would illustrate, apart from the potential itself resulting from the infrastructure, also the actually existing connections.

Monitoring the World Health Organization Global Target 2025 for Exclusive Breastfeeding: Experience From the United States.

PubMed

Gupta, Priya M; Perrine, Cria G; Chen, Jian; Elam-Evans, Laurie D; Flores-Ayala, Rafael

2017-08-01

Exclusive breastfeeding under 6 months, calculated from a single 24-hour recall among mothers of children 0 to 5 months of age, is a World Health Organization (WHO) indicator used to monitor progress on the 2025 global breastfeeding target. Many upper-middle-income and high-income countries, including the United States, do not have estimates for this indicator. Research aim: To describe the prevalence of exclusive breastfeeding under 6 months in the United States. We used a single 24-hour dietary recall from the National Health and Nutrition Examination Survey 2009-2012 to calculate the prevalence of exclusive breastfeeding under 6 months. We discuss our results in the context of routine breastfeeding surveillance, which is reported from a national survey with different methodology. Among children younger than 6 months, 24.4%, 95% confidence interval [17.6, 31.1], were exclusively breastfed the previous day. To our knowledge, this is the first estimate of the WHO indicator of exclusive breastfeeding under 6 months for the United States. This study supports the global surveillance and data strategy for reporting to the WHO on the 2025 target for exclusive breastfeeding.

Space Shuttle Navigation in the GPS Era

NASA Technical Reports Server (NTRS)

Goodman, John L.

2001-01-01

The Space Shuttle navigation architecture was originally designed in the 1970s. A variety of on-board and ground based navigation sensors and computers are used during the ascent, orbit coast, rendezvous, (including proximity operations and docking) and entry flight phases. With the advent of GPS navigation and tightly coupled GPS/INS Units employing strapdown sensors, opportunities to improve and streamline the Shuttle navigation process are being pursued. These improvements can potentially result in increased safety, reliability, and cost savings in maintenance through the replacement of older technologies and elimination of ground support systems (such as Tactical Air Control and Navigation (TACAN), Microwave Landing System (MLS) and ground radar). Selection and missionization of "off the shelf" GPS and GPS/INS units pose a unique challenge since the units in question were not originally designed for the Space Shuttle application. Various options for integrating GPS and GPS/INS units with the existing orbiter avionics system were considered in light of budget constraints, software quality concerns, and schedule limitations. An overview of Shuttle navigation methodology from 1981 to the present is given, along with how GPS and GPS/INS technology will change, or not change, the way Space Shuttle navigation is performed in the 21 5 century.

A global reference database from very high resolution commercial satellite data and methodology for application to Landsat derived 30 m continuous field tree cover data

USGS Publications Warehouse

Pengra, Bruce; Long, Jordan; Dahal, Devendra; Stehman, Stephen V.; Loveland, Thomas R.

2015-01-01

The methodology for selection, creation, and application of a global remote sensing validation dataset using high resolution commercial satellite data is presented. High resolution data are obtained for a stratified random sample of 500 primary sampling units (5 km  ×  5 km sample blocks), where the stratification based on Köppen climate classes is used to distribute the sample globally among biomes. The high resolution data are classified to categorical land cover maps using an analyst mediated classification workflow. Our initial application of these data is to evaluate a global 30 m Landsat-derived, continuous field tree cover product. For this application, the categorical reference classification produced at 2 m resolution is converted to percent tree cover per 30 m pixel (secondary sampling unit)for comparison to Landsat-derived estimates of tree cover. We provide example results (based on a subsample of 25 sample blocks in South America) illustrating basic analyses of agreement that can be produced from these reference data. Commercial high resolution data availability and data quality are shown to provide a viable means of validating continuous field tree cover. When completed, the reference classifications for the full sample of 500 blocks will be released for public use.

A Collaborative Learning Network Approach to Improvement: The CUSP Learning Network.

PubMed

Weaver, Sallie J; Lofthus, Jennifer; Sawyer, Melinda; Greer, Lee; Opett, Kristin; Reynolds, Catherine; Wyskiel, Rhonda; Peditto, Stephanie; Pronovost, Peter J

2015-04-01

Collaborative improvement networks draw on the science of collaborative organizational learning and communities of practice to facilitate peer-to-peer learning, coaching, and local adaption. Although significant improvements in patient safety and quality have been achieved through collaborative methods, insight regarding how collaborative networks are used by members is needed. Improvement Strategy: The Comprehensive Unit-based Safety Program (CUSP) Learning Network is a multi-institutional collaborative network that is designed to facilitate peer-to-peer learning and coaching specifically related to CUSP. Member organizations implement all or part of the CUSP methodology to improve organizational safety culture, patient safety, and care quality. Qualitative case studies developed by participating members examine the impact of network participation across three levels of analysis (unit, hospital, health system). In addition, results of a satisfaction survey designed to evaluate member experiences were collected to inform network development. Common themes across case studies suggest that members found value in collaborative learning and sharing strategies across organizational boundaries related to a specific improvement strategy. The CUSP Learning Network is an example of network-based collaborative learning in action. Although this learning network focuses on a particular improvement methodology-CUSP-there is clear potential for member-driven learning networks to grow around other methods or topic areas. Such collaborative learning networks may offer a way to develop an infrastructure for longer-term support of improvement efforts and to more quickly diffuse creative sustainment strategies.

Scabies in residential care homes: Modelling, inference and interventions for well-connected population sub-units

PubMed Central

Middleton, Jo; Güttel, Stefan; Cassell, Jackie; Ross, Joshua

2018-01-01

In the context of an ageing population, understanding the transmission of infectious diseases such as scabies through well-connected sub-units of the population, such as residential care homes, is particularly important for the design of efficient interventions to mitigate against the effects of those diseases. Here, we present a modelling methodology based on the efficient solution of a large-scale system of linear differential equations that allows statistical calibration of individual-based random models to real data on scabies in residential care homes. In particular, we review and benchmark different numerical methods for the integration of the differential equation system, and then select the most appropriate of these methods to perform inference using Markov chain Monte Carlo. We test the goodness-of-fit of this model using posterior predictive intervals and propagate forward the resulting parameter uncertainty in a Bayesian framework to consider the economic cost of delayed interventions against scabies, quantifying the benefits of prompt action in the event of detection. We also revisit the previous methodology used to assess the safety of treatments in small population sub-units—in this context ivermectin—and demonstrate that even a very slight relaxation of the implicit assumption of homogeneous death rates significantly increases the plausibility of the hypothesis that ivermectin does not cause excess mortality based upon the data of Barkwell and Shields. PMID:29579037

Distribution of muscle fibre conduction velocity for representative samples of motor units in the full recruitment range of the tibialis anterior muscle.

PubMed

Del Vecchio, A; Negro, F; Felici, F; Farina, D

2018-02-01

Motor units are recruited in an orderly manner according to the size of motor neurones. Moreover, because larger motor neurones innervate fibres with larger diameters than smaller motor neurones, motor units should be recruited orderly according to their conduction velocity (MUCV). Because of technical limitations, these relations have been previously tested either indirectly or in small motor unit samples that revealed weak associations between motor unit recruitment threshold (RT) and MUCV. Here, we analyse the relation between MUCV and RT for large samples of motor units. Ten healthy volunteers completed a series of isometric ankle dorsiflexions at forces up to 70% of the maximum. Multi-channel surface electromyographic signals recorded from the tibialis anterior muscle were decomposed into single motor unit action potentials, from which the corresponding motor unit RT, MUCV and action potential amplitude were estimated. Established relations between muscle fibre diameter and CV were used to estimate the fibre size. Within individual subjects, the distributions of MUCV and fibre diameters were unimodal and did not show distinct populations. MUCV was strongly correlated with RT (mean (SD) R 2  = 0.7 (0.09), P < 0.001; 406 motor units), which supported the hypothesis that fibre diameter is associated with RT. The results provide further evidence for the relations between motor neurone and muscle fibre properties for large samples of motor units. The proposed methodology for motor unit analysis has also the potential to open new perspectives in the study of chronic and acute neuromuscular adaptations to ageing, training and pathology. © 2017 Scandinavian Physiological Society. Published by John Wiley & Sons Ltd.

Definition of sampling units begets conclusions in ecology: the case of habitats for plant communities.

PubMed

Mörsdorf, Martin A; Ravolainen, Virve T; Støvern, Leif Einar; Yoccoz, Nigel G; Jónsdóttir, Ingibjörg Svala; Bråthen, Kari Anne

2015-01-01

In ecology, expert knowledge on habitat characteristics is often used to define sampling units such as study sites. Ecologists are especially prone to such approaches when prior sampling frames are not accessible. Here we ask to what extent can different approaches to the definition of sampling units influence the conclusions that are drawn from an ecological study? We do this by comparing a formal versus a subjective definition of sampling units within a study design which is based on well-articulated objectives and proper methodology. Both approaches are applied to tundra plant communities in mesic and snowbed habitats. For the formal approach, sampling units were first defined for each habitat in concave terrain of suitable slope using GIS. In the field, these units were only accepted as the targeted habitats if additional criteria for vegetation cover were fulfilled. For the subjective approach, sampling units were defined visually in the field, based on typical plant communities of mesic and snowbed habitats. For each approach, we collected information about plant community characteristics within a total of 11 mesic and seven snowbed units distributed between two herding districts of contrasting reindeer density. Results from the two approaches differed significantly in several plant community characteristics in both mesic and snowbed habitats. Furthermore, differences between the two approaches were not consistent because their magnitude and direction differed both between the two habitats and the two reindeer herding districts. Consequently, we could draw different conclusions on how plant diversity and relative abundance of functional groups are differentiated between the two habitats depending on the approach used. We therefore challenge ecologists to formalize the expert knowledge applied to define sampling units through a set of well-articulated rules, rather than applying it subjectively. We see this as instrumental for progress in ecology as only rules based on expert knowledge are transparent and lead to results reproducible by other ecologists.

Effectiveness of non-pharmacological interventions for the prevention of bloodstream infections in infants admitted to a neonatal intensive care unit: A systematic review.

PubMed

Helder, Onno; van den Hoogen, Agnes; de Boer, Coby; van Goudoever, Johannes; Verboon-Maciolek, Malgosia; Kornelisse, René

2013-06-01

Bloodstream infections are associated with increased morbidity and mortality in very low birth weight infants admitted to neonatal intensive care units. To evaluate the available evidence for the effectiveness of non-pharmacological bloodstream infection-preventive measures in infants admitted to a neonatal intensive care unit. A systematic review of randomized, controlled trials, controlled clinical trials, interrupted time series and pretest-posttest studies. PubMed, CINAHL, Web-of-Science, Cochrane Central Register of Controlled Trials, and Embase were searched. The systematic review was carried out according to the guidelines of the Center for Reviews and Dissemination. The methodological quality of the individual studies was evaluated with the quantitative evaluation form of McMaster University. The review included randomized, controlled trials, controlled clinical trials, interrupted time series, and pre-posttest studies published from January 1990 to January 2011. Quantitative pooling of the results was not feasible due to the high heterogeneity of the interventions, methods and outcome measures. Instead, we present the studies in tabular form and provide a narrative account of the study characteristics and results. Fifteen studies out of 288 generated hits were selected and categorized as research on: hand hygiene (5), intravenous (IV) bundles (4), closed IV sets/patches/filters (4), surveillance (1), and percutaneously inserted central catheter teams (1). IV bundles including proper insertion and proper maintenance showed to be the most effective intervention for preventing bloodstream infection in infants; in three out of four studies on IV bundles, a statistically significant reduction of bloodstream infections was mentioned. Although the methodological quality of most studies was not very robust, we conclude that IV bundles may decrease bloodstream infections in infants. However, differences in IV bundle components and in practices limited the underpinning evidence. There is limited evidence that the introduction of a percutaneously inserted central catheter team results in bloodstream infection reduction. Hand hygiene promotion increases hand hygiene among healthcare workers, but there is inconclusive evidence that this intervention subsequently leads to a bloodstream infection reduction in infants. Future studies must be well designed, with standardized outcome measures. Copyright © 2012 Elsevier Ltd. All rights reserved.

Developing a set of consensus indicators to support maternity service quality improvement: using Core Outcome Set methodology including a Delphi process.

PubMed

Bunch, K J; Allin, B; Jolly, M; Hardie, T; Knight, M

2018-05-16

To develop a core metric set to monitor the quality of maternity care. Delphi process followed by a face-to-face consensus meeting. English maternity units. Three representative expert panels: service designers, providers and users. Maternity care metrics judged important by participants. Participants were asked to complete a two-phase Delphi process, scoring metrics from existing local maternity dashboards. A consensus meeting discussed the results and re-scored the metrics. In all, 125 distinct metrics across six domains were identified from existing dashboards. Following the consensus meeting, 14 metrics met the inclusion criteria for the final core set: smoking rate at booking; rate of birth without intervention; caesarean section delivery rate in Robson group 1 women; caesarean section delivery rate in Robson group 2 women; caesarean section delivery rate in Robson group 5 women; third- and fourth-degree tear rate among women delivering vaginally; rate of postpartum haemorrhage of ≥1500 ml; rate of successful vaginal birth after a single previous caesarean section; smoking rate at delivery; proportion of babies born at term with an Apgar score <7 at 5 minutes; proportion of babies born at term admitted to the neonatal intensive care unit; proportion of babies readmitted to hospital at <30 days of age; breastfeeding initiation rate; and breastfeeding rate at 6-8 weeks. Core outcome set methodology can be used to incorporate the views of key stakeholders in developing a core metric set to monitor the quality of care in maternity units, thus enabling improvement. Achieving consensus on core metrics for monitoring the quality of maternity care. © 2018 The Authors. BJOG: An International Journal of Obstetrics and Gynaecology published by John Wiley & Sons Ltd on behalf of Royal College of Obstetricians and Gynaecologists.

A simple landslide susceptibility analysis for hazard and risk assessment in developing countries

NASA Astrophysics Data System (ADS)

Guinau, M.; Vilaplana, J. M.

2003-04-01

In recent years, a number of techniques and methodologies have been developed for mitigating natural disasters. The complexity of these methodologies and the scarcity of material and data series justify the need for simple methodologies to obtain the necessary information for minimising the effects of catastrophic natural phenomena. The work with polygonal maps using a GIS allowed us to develop a simple methodology, which was developed in an area of 473 Km2 in the Departamento de Chinandega (NW Nicaragua). This area was severely affected by a large number of landslides (mainly debris flows), triggered by the Hurricane Mitch rainfalls in October 1998. With the aid of aerial photography interpretation at 1:40.000 scale, amplified to 1:20.000, and detailed field work, a landslide map at 1:10.000 scale was constructed. The failure zones of landslides were digitized in order to obtain a failure zone digital map. A terrain unit digital map, in which a series of physical-environmental terrain factors are represented, was also used. Dividing the studied area into two zones (A and B) with homogeneous physical and environmental characteristics, allows us to develop the proposed methodology and to validate it. In zone A, the failure zone digital map is superimposed onto the terrain unit digital map to establish the relationship between the different terrain factors and the failure zones. The numerical expression of this relationship enables us to classify the terrain by its landslide susceptibility. In zone B, this numerical relationship was employed to obtain a landslide susceptibility map, obviating the need for a failure zone map. The validity of the methodology can be tested in this area by using the degree of superposition of the susceptibility map and the failure zone map. The implementation of the methodology in tropical countries with physical and environmental characteristics similar to those of the study area allows us to carry out a landslide susceptibility analysis in areas where landslide records do not exist. This analysis is essential to landslide hazard and risk assessment, which is necessary to determine the actions for mitigating landslide effects, e.g. land planning, emergency aid actions, etc.

Airfreight forecasting methodology and results

NASA Technical Reports Server (NTRS)

1978-01-01

A series of econometric behavioral equations was developed to explain and forecast the evolution of airfreight traffic demand for the total U.S. domestic airfreight system, the total U.S. international airfreight system, and the total scheduled international cargo traffic carried by the top 44 foreign airlines. The basic explanatory variables used in these macromodels were the real gross national products of the countries involved and a measure of relative transportation costs. The results of the econometric analysis reveal that the models explain more than 99 percent of the historical evolution of freight traffic. The long term traffic forecasts generated with these models are based on scenarios of the likely economic outlook in the United States and 31 major foreign countries.

Airport Capacity Investment Handbook

DOT National Transportation Integrated Search

1978-12-01

This handbook provides a methodology for estimating the benefits and costs of capacity-related investments in airports in the United States. The procedures are laid out in a series of worksheets. The user provides certain basic information such as ex...

A comprehensive safety assessment methodology for innovative geometric designs.

DOT National Transportation Integrated Search

2017-05-01

As the population grows and travel demands increase, alternative interchange designs have become increasingly popular. The diverging diamond interchange is an alternative design that has been implemented in the United States. This design can accommod...

Fukushima Daiichi unit 1 uncertainty analysis--Preliminary selection of uncertain parameters and analysis methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cardoni, Jeffrey N.; Kalinich, Donald A.

2014-02-01

Sandia National Laboratories (SNL) plans to conduct uncertainty analyses (UA) on the Fukushima Daiichi unit (1F1) plant with the MELCOR code. The model to be used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). However, that study only examined a handful of various model inputs and boundary conditions, and the predictions yielded only fair agreement with plant data and current release estimates. The goal of this uncertainty study is to perform a focused evaluation of uncertainty in core melt progression behavior and its effect on keymore » figures-of-merit (e.g., hydrogen production, vessel lower head failure, etc.). In preparation for the SNL Fukushima UA work, a scoping study has been completed to identify important core melt progression parameters for the uncertainty analysis. The study also lays out a preliminary UA methodology.« less

Optimal Micro-Vane Flow Control for Compact Air Vehicle Inlets

NASA Technical Reports Server (NTRS)

Anderson, Bernhard H.; Miller, Daniel N.; Addington, Gregory A.; Agrell, Johan

2004-01-01

The purpose of this study on micro-vane secondary flow control is to demonstrate the viability and economy of Response Surface Methodology (RSM) to optimally design micro-vane secondary flow control arrays, and to establish that the aeromechanical effects of engine face distortion can also be included in the design and optimization process. These statistical design concepts were used to investigate the design characteristics of "low unit strength" micro-effector arrays. "Low unit strength" micro-effectors are micro-vanes set at very low angles-of-incidence with very long chord lengths. They were designed to influence the near wall inlet flow over an extended streamwise distance, and their advantage lies in low total pressure loss and high effectiveness in managing engine face distortion. Therefore, this report examines optimal micro-vane secondary flow control array designs for compact inlets through a Response Surface Methodology.

Partially pre-calculated weights for the backpropagation learning regime and high accuracy function mapping using continuous input RAM-based sigma-pi nets.

PubMed

Neville, R S; Stonham, T J; Glover, R J

2000-01-01

In this article we present a methodology that partially pre-calculates the weight updates of the backpropagation learning regime and obtains high accuracy function mapping. The paper shows how to implement neural units in a digital formulation which enables the weights to be quantised to 8-bits and the activations to 9-bits. A novel methodology is introduced to enable the accuracy of sigma-pi units to be increased by expanding their internal state space. We, also, introduce a novel means of implementing bit-streams in ring memories instead of utilising shift registers. The investigation utilises digital "Higher Order" sigma-pi nodes and studies continuous input RAM-based sigma-pi units. The units are trained with the backpropagation learning regime to learn functions to a high accuracy. The neural model is the sigma-pi units which can be implemented in digital microelectronic technology. The ability to perform tasks that require the input of real-valued information, is one of the central requirements of any cognitive system that utilises artificial neural network methodologies. In this article we present recent research which investigates a technique that can be used for mapping accurate real-valued functions to RAM-nets. One of our goals was to achieve accuracies of better than 1% for target output functions in the range Y epsilon [0,1], this is equivalent to an average Mean Square Error (MSE) over all training vectors of 0.0001 or an error modulus of 0.01. We present a development of the sigma-pi node which enables the provision of high accuracy outputs. The sigma-pi neural model was initially developed by Gurney (Learning in nets of structured hypercubes. PhD Thesis, Department of Electrical Engineering, Brunel University, Middlessex, UK, 1989; available as Technical Memo CN/R/144). Gurney's neuron models, the Time Integration Node (TIN), utilises an activation that was derived from a bit-stream. In this article we present a new methodology for storing sigma-pi node's activations as single values which are averages. In the course of the article we state what we define as a real number; how we represent real numbers and input of continuous values in our neural system. We show how to utilise the bounded quantised site-values (weights) of sigma-pi nodes to make training of these neurocomputing systems simple, using pre-calculated look-up tables to train the nets. In order to meet our accuracy goal, we introduce a means of increasing the bandwidth capability of sigma-pi units by expanding their internal state-space. In our implementation we utilise bit-streams when we calculate the real-valued outputs of the net. To simplify the hardware implementation of bit-streams we present a method of mapping them to RAM-based hardware using 'ring memories'. Finally, we study the sigma-pi units' ability to generalise once they are trained to map real-valued, high accuracy, continuous functions. We use sigma-pi units as they have been shown to have shorter training times than their analogue counterparts and can also overcome some of the drawbacks of semi-linear units (Gurney, 1992. Neural Networks, 5, 289-303).

Traceable working standards with SI units of radiance for characterizing the measurement performance of investigational clinical NIRF imaging devices

NASA Astrophysics Data System (ADS)

Zhu, Banghe; Rasmussen, John C.; Litorja, Maritoni; Sevick-Muraca, Eva M.

2017-03-01

All medical devices for Food and Drug market approval require specifications of performance based upon International System of Units (SI) or units derived from SI for reasons of traceability. Recently, near-infrared fluorescence (NIRF) imaging devices of a variety of designs have emerged on the market and in investigational clinical studies. Yet the design of devices used in the clinical studies vary widely, suggesting variable device performance. Device performance depends upon optimal excitation of NIRF imaging agents, rejection of backscattered excitation and ambient light, and selective collection of fluorescence emanating from the fluorophore. There remains no traceable working standards with SI units of radiance to enable prediction that a given molecular imaging agent can be detected in humans by a given NIRF imaging device. Furthermore, as technologies evolve and as NIRF imaging device components change, there remains no standardized means to track device improvements over time and establish clinical performance without involving clinical trials, often costly. In this study, we deployed a methodology to calibrate luminescent radiance of a stable, solid phantom in SI units of mW/cm2/sr for characterizing the measurement performance of ICCD and IsCMOS camera based NIRF imaging devices, such as signal-to-noise ratio (SNR) and contrast. The methodology allowed determination of superior SNR of the ICCD over the IsCMOS system; comparable contrast of ICCD and IsCMOS depending upon binning strategies.

A sensitivity analysis for missing outcomes due to truncation by death under the matched-pairs design.

PubMed

Imai, Kosuke; Jiang, Zhichao

2018-04-29

The matched-pairs design enables researchers to efficiently infer causal effects from randomized experiments. In this paper, we exploit the key feature of the matched-pairs design and develop a sensitivity analysis for missing outcomes due to truncation by death, in which the outcomes of interest (e.g., quality of life measures) are not even well defined for some units (e.g., deceased patients). Our key idea is that if 2 nearly identical observations are paired prior to the randomization of the treatment, the missingness of one unit's outcome is informative about the potential missingness of the other unit's outcome under an alternative treatment condition. We consider the average treatment effect among always-observed pairs (ATOP) whose units exhibit no missing outcome regardless of their treatment status. The naive estimator based on available pairs is unbiased for the ATOP if 2 units of the same pair are identical in terms of their missingness patterns. The proposed sensitivity analysis characterizes how the bounds of the ATOP widen as the degree of the within-pair similarity decreases. We further extend the methodology to the matched-pairs design in observational studies. Our simulation studies show that informative bounds can be obtained under some scenarios when the proportion of missing data is not too large. The proposed methodology is also applied to the randomized evaluation of the Mexican universal health insurance program. An open-source software package is available for implementing the proposed research. Copyright © 2018 John Wiley & Sons, Ltd.

Life cycle costing of food waste: A review of methodological approaches.

PubMed

De Menna, Fabio; Dietershagen, Jana; Loubiere, Marion; Vittuari, Matteo

2018-03-01

Food waste (FW) is a global problem that is receiving increasing attention due to its environmental and economic impacts. Appropriate FW prevention, valorization, and management routes could mitigate or avoid these effects. Life cycle thinking and approaches, such as life cycle costing (LCC), may represent suitable tools to assess the sustainability of these routes. This study analyzes different LCC methodological aspects and approaches to evaluate FW management and valorization routes. A systematic literature review was carried out with a focus on different LCC approaches, their application to food, FW, and waste systems, as well as on specific methodological aspects. The review consisted of three phases: a collection phase, an iterative phase with experts' consultation, and a final literature classification. Journal papers and reports were retrieved from selected databases and search engines. The standardization of LCC methodologies is still in its infancy due to a lack of consensus over definitions and approaches. Research on the life cycle cost of FW is limited and generally focused on FW management, rather than prevention or valorization of specific flows. FW prevention, valorization, and management require a consistent integration of LCC and Life Cycle Assessment (LCA) to avoid tradeoffs between environmental and economic impacts. This entails a proper investigation of methodological differences between attributional and consequential modelling in LCC, especially with regard to functional unit, system boundaries, multi-functionality, included cost, and assessed impacts. Further efforts could also aim at finding the most effective and transparent categorization of costs, in particular when dealing with multiple stakeholders sustaining costs of FW. Interpretation of results from LCC of FW should take into account the effect on larger economic systems. Additional key performance indicators and analytical tools could be included in consequential approaches. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

How equity is addressed in clinical practice guidelines: a content analysis

PubMed Central

Shi, Chunhu; Tian, Jinhui; Wang, Quan; Petkovic, Jennifer; Ren, Dan; Yang, Kehu; Yang, Yang

2014-01-01

Objectives Considering equity into guidelines presents methodological challenges. This study aims to qualitatively synthesise the methods for incorporating equity in clinical practice guidelines (CPGs). Setting Content analysis of methodological publications. Eligibility criteria for selecting studies Methodological publications were included if they provided checklists/frameworks on when, how and to what extent equity should be incorporated in CPGs. Data sources We electronically searched MEDLINE, retrieved references, and browsed guideline development organisation websites from inception to January 2013. After study selection by two authors, general characteristics and checklists items/framework components from included studies were extracted. Based on the questions or items from checklists/frameworks (unit of analysis), content analysis was conducted to identify themes and questions/items were grouped into these themes. Primary outcomes The primary outcomes were methodological themes and processes on how to address equity issues in guideline development. Results 8 studies with 10 publications were included from 3405 citations. In total, a list of 87 questions/items was generated from 17 checklists/frameworks. After content analysis, questions were grouped into eight themes (‘scoping questions’, ‘searching relevant evidence’, ‘appraising evidence and recommendations’, ‘formulating recommendations’, ‘monitoring implementation’, ‘providing a flow chart to include equity in CPGs’, and ‘others: reporting of guidelines and comments from stakeholders’ for CPG developers and ‘assessing the quality of CPGs’ for CPG users). Four included studies covered more than five of these themes. We also summarised the process of guideline development based on the themes mentioned above. Conclusions For disadvantaged population-specific CPGs, eight important methodological issues identified in this review should be considered when including equity in CPGs under the guidance of a scientific guideline development manual. PMID:25479795

Knowledge Globalization within and across the People's Republic of China and the United States: A Cross-National Study of Internationalization of Educational Research in the Early 21st Century

ERIC Educational Resources Information Center

Tierney, Robert J.; Kan, Wei

2016-01-01

The study examines globalization within and across China and the United States in conjunction with a portrayal of the nature of the scholarly endeavors over the past 10 years in the two preeminent educational research journals of these countries. By extensive analyses of topics, methodology, and citations the research clarifies the global and…

Equality of Opportunity and Vocational Training. Creation and Management of Enterprises by Women. The Situation in the United Kingdom. Rapport National Royaume-Uni. Synthesis Report.

ERIC Educational Resources Information Center

May, Annie

This document contains three reports: (1) a report on women entrepreneurs in the United Kingdom (UK) in English; (2) the same report in French; and (3) a synthesis report of 12 national reports and 4 related reports. The report on women entrepreneurs in the UK includes an introduction, a description of the methodology, five sections of findings,…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foley, M.G.; Zimmerman, D.A.; Doesburg, J.M.

A literature review was conducted to identify methodologies that could be used to interpret paleohydrologic environments. Paleohydrology is the study of past hydrologic systems or of the past behavior of an existing hydrologic system. The purpose of the review was to evaluate how well these methodologies could be applied to the siting of low-level radioactive waste facilities. The computer literature search queried five bibliographical data bases containing over five million citations of technical journals, books, conference papers, and reports. Two data-base searches (United States Geological Survey - USGS) and a manual search were also conducted. The methodologies were examined formore » data requirements and sensitivity limits. Paleohydrologic interpretations are uncertain because of the effects of time on hydrologic and geologic systems and because of the complexity of fluvial systems. Paleoflow determinations appear in many cases to be order-of-magnitude estimates. However, the methodologies identified in this report mitigate this uncertainty when used collectively as well as independently. That is, the data from individual methodologies can be compared or combined to corroborate hydrologic predictions. In this manner, paleohydrologic methodologies are viable tools to assist in evaluating the likely future hydrology of low-level radioactive waste sites.« less

Empacho in four Latino groups: a study of intra- and inter-cultural variation in beliefs.

PubMed

Weller, S C; Pachter, L M; Trotter, R T; Baer, R D

1993-04-01

It is usually impossible to know if reported differences between cultures are due to cultural differences or due to a difference in the methods used to study the cultures. This paper describes a collaborative, multisite study using a shared methodology to study intra- and inter-cultural variation in beliefs. A series of standard interview schedules were used to study Latin American beliefs about empacho in Guatemala, Mexico, and in the United States (Mexican-Americans and Puerto Ricans). Results showed consistency in beliefs about empacho both within and between the four samples.

[Working Education Program in Health: transforming experience of nursing teaching and practice].

PubMed

Santos, Débora de Souza; Santos de Almeida, Lenira Maria Wanderley; Reis, Renata Karina

2013-12-01

This is an experience report of tutors from nursing Working Education Program in Health ( PET- Saúde ) from the Federal University of Alagoas, from May 2009 to April 2010. The objective of the nursing PET-Saúde was to develop health education actions aimed at the needs of the communities attended by the Family Health Units in Maceio, Alagoas. We conducted a health planning guided by the problem-based methodology. The activities resulted in changes in student learning and in the practice of nurses PET-Saúde , indicating the importance of this program for teaching and practice of nursing.

Aerodynamic and acoustic test of a United Technologies model scale rotor at DNW

NASA Technical Reports Server (NTRS)

Yu, Yung H.; Liu, Sandy R.; Jordan, Dave E.; Landgrebe, Anton J.; Lorber, Peter F.; Pollack, Michael J.; Martin, Ruth M.

1990-01-01

The UTC model scale rotors, the DNW wind tunnel, the AFDD rotary wing test stand, the UTRC and AFDD aerodynamic and acoustic data acquisition systems, and the scope of test matrices are discussed and an introduction to the test results is provided. It is pointed out that a comprehensive aero/acoustic database of several configurations of the UTC scaled model rotor has been created. The data is expected to improve understanding of rotor aerodynamics, acoustics, and dynamics, and lead to enhanced analytical methodology and design capabilities for the next generation of rotorcraft.

The Incident Command System: a literature review.

PubMed

Jensen, Jessica; Thompson, Steven

2016-01-01

Given the foundational and the fundamental role that the Incident Command System (ICS) is intended to play in on-scene response efforts across the United States, it is important to determine what is known about the system and how this is known. Accordingly, this study addresses the following research question: 'How has research explored the ICS?'. To probe this question, a methodological review of the scant, but widening, pool of research literature directly related to the ICS was conducted. This paper reports on the findings of the analysis related to the focus, theoretical frameworks, population and sampling, methods, results, and conclusions of the existing research literature. While undertaken using different methodological approaches, the ICS research suggests that the system may be limited in its usefulness. In addition, the paper discusses the implications of the research for the state of knowledge of the system and for the direction of future research. © 2016 The Author(s). Disasters © Overseas Development Institute, 2016.

[Nursing care systematization according to the nurses' view: a methodological approach based on grounded theory].

PubMed

de Medeiros, Ana Lúcia; dos Santos, Sérgio Ribeiro; de Cabral, Rômulo Wanderley Lima

2012-09-01

This study was aimed at understanding, from the nurses' perspective, the experience of going through the Systematization of nursing care (SNC) in an obstetric service unit. We used grounded theory as the theoretical and methodological framework. The subjects of this study consisted of thirteen nurses from a public hospital in the city of João Pessoa, in the state of Paraíba. The data analysis resulted in the following phenomenon. "perceiving SNC as a working method that organizes, directs and improves the quality of care by bringing visibility and providing security for the nursing staff" The nurses expressed the extent of knowledge about the SNC experienced in obstetrics as well as considered the nursing process as a decision-making process, which guides the reasoning of nurses in the planning of nursing care in obstetrics. It was concluded that nurses perceive the SNC as an instrument of theoretical-practical articulation leading to personalized assistance.

Improved classification of drainage networks using junction angles and secondary tributary lengths

NASA Astrophysics Data System (ADS)

Jung, Kichul; Marpu, Prashanth R.; Ouarda, Taha B. M. J.

2015-06-01

River networks in different regions have distinct characteristics generated by geological processes. These differences enable classification of drainage networks using several measures with many features of the networks. In this study, we propose a new approach that only uses the junction angles with secondary tributary lengths to directly classify different network types. This methodology is based on observations on 50 predefined channel networks. The cumulative distributions of secondary tributary lengths for different ranges of junction angles are used to obtain the descriptive values that are defined using a power-law representation. The averages of the values for the known networks are used to represent the classes, and any unclassified network can be classified based on the similarity of the representative values to those of the known classes. The methodology is applied to 10 networks in the United Arab Emirates and Oman and five networks in the USA, and the results are validated using the classification obtained with other methods.

Towards a general object-oriented software development methodology

NASA Technical Reports Server (NTRS)

Seidewitz, ED; Stark, Mike

1986-01-01

An object is an abstract software model of a problem domain entity. Objects are packages of both data and operations of that data (Goldberg 83, Booch 83). The Ada (tm) package construct is representative of this general notion of an object. Object-oriented design is the technique of using objects as the basic unit of modularity in systems design. The Software Engineering Laboratory at the Goddard Space Flight Center is currently involved in a pilot program to develop a flight dynamics simulator in Ada (approximately 40,000 statements) using object-oriented methods. Several authors have applied object-oriented concepts to Ada (e.g., Booch 83, Cherry 85). It was found that these methodologies are limited. As a result a more general approach was synthesized with allows a designer to apply powerful object-oriented principles to a wide range of applications and at all stages of design. An overview is provided of this approach. Further, how object-oriented design fits into the overall software life-cycle is considered.

Gait Partitioning Methods: A Systematic Review

PubMed Central

Taborri, Juri; Palermo, Eduardo; Rossi, Stefano; Cappa, Paolo

2016-01-01

In the last years, gait phase partitioning has come to be a challenging research topic due to its impact on several applications related to gait technologies. A variety of sensors can be used to feed algorithms for gait phase partitioning, mainly classifiable as wearable or non-wearable. Among wearable sensors, footswitches or foot pressure insoles are generally considered as the gold standard; however, to overcome some inherent limitations of the former, inertial measurement units have become popular in recent decades. Valuable results have been achieved also though electromyography, electroneurography, and ultrasonic sensors. Non-wearable sensors, such as opto-electronic systems along with force platforms, remain the most accurate system to perform gait analysis in an indoor environment. In the present paper we identify, select, and categorize the available methodologies for gait phase detection, analyzing advantages and disadvantages of each solution. Finally, we comparatively examine the obtainable gait phase granularities, the usable computational methodologies and the optimal sensor placements on the targeted body segments. PMID:26751449

Gait Partitioning Methods: A Systematic Review.

PubMed

Taborri, Juri; Palermo, Eduardo; Rossi, Stefano; Cappa, Paolo

2016-01-06

In the last years, gait phase partitioning has come to be a challenging research topic due to its impact on several applications related to gait technologies. A variety of sensors can be used to feed algorithms for gait phase partitioning, mainly classifiable as wearable or non-wearable. Among wearable sensors, footswitches or foot pressure insoles are generally considered as the gold standard; however, to overcome some inherent limitations of the former, inertial measurement units have become popular in recent decades. Valuable results have been achieved also though electromyography, electroneurography, and ultrasonic sensors. Non-wearable sensors, such as opto-electronic systems along with force platforms, remain the most accurate system to perform gait analysis in an indoor environment. In the present paper we identify, select, and categorize the available methodologies for gait phase detection, analyzing advantages and disadvantages of each solution. Finally, we comparatively examine the obtainable gait phase granularities, the usable computational methodologies and the optimal sensor placements on the targeted body segments.

Older nurses' experiences of providing direct care in hospital nursing units: a qualitative systematic review.

PubMed

Parsons, Karen; Gaudine, Alice; Swab, Michelle

2018-03-01

Most developed countries throughout the world are experiencing an aging nursing workforce as their population ages. Older nurses often experience different challenges then their younger nurse counterparts. With the increase in older nurses relative to younger nurses potentially available to work in hospitals, it is important to understand the experience of older nurses on high paced hospital nursing units. This understanding will lend knowledge to ways of lessening the loss of these highly skilled experienced workers and improve patient outcomes. To identify, evaluate and synthesize the existing qualitative evidence on older nurses' experiences of providing direct care to patients in hospital nursing units. The review considered studies which included registered nurses 45 years and over who work as direct caregivers in any type of in-patient hospital nursing unit. The phenomenon of interest was the experience of older nurses in providing direct nursing care in any type of in-patient hospital nursing unit (i.e. including but not limited to medical/surgical units, intensive care units, critical care units, perioperative units, palliative care units, obstetrical units, emergency departments and rehabilitative care units). The review excluded studies focussing entirely on enrolled nurses, licensed practical nurses and licensed vocational nurses. Qualitative data including, but not limited to the following methodologies: phenomenology, grounded theory, ethnography, action research and feminist research. The databases CINAHL, PubMed, PsycINFO, Embase, AgeLine, Sociological Abstracts and SocINDEX were searched from inception; the search was conducted on October 13, 2017; no date limiters or language limiters were applied. Each paper was assessed by two independent reviewers for methodological quality using the Joanna Briggs Institute (JBI) Critical Appraisal Checklist for Qualitative Research. Any disagreements that arose between the reviewers were resolved through discussion. Data extraction was conducted by two independent reviewers using the standardized qualitative data extraction tool from JBI. The qualitative research findings were pooled using JBI methodology. The JBI process of meta-aggregation was used to identify categories and synthesized findings. Twelve papers were included in the review. Three synthesized findings were extracted from 12 categories and 75 findings. The three synthesized findings extracted from the papers were: (1) Love of nursing: It's who I am and I love it; (2) It's a rewarding but challenging and changing job; it's a different job and it can be challenging; (3) It's a challenging job; can I keep up? Older nurses love nursing and have created an identity around their profession. They view their profession positively and believe their job to be unlike any other, yet they identify many ongoing challenges and changes. Despite their desire to continue in their role they are often faced with hardships that threaten their ability to stay at the bedside. A key role of hospital administrators to keep older nurses in the workplace is to develop programs to prevent work related illness and to promote health. Given the low ConQual scores in the current systematic review, additional research is recommended to understand the older nurses' experience in providing direct care in hospital nursing units as well as predicting health age of retirement and length of bedside nursing.

The effects of maternity leave on children's birth and infant health outcomes in the United States.

PubMed

Rossin, Maya

2011-03-01

This paper evaluates the impacts of unpaid maternity leave provisions of the 1993 Family and Medical Leave Act (FMLA) on children's birth and infant health outcomes in the United States. My identification strategy uses variation in pre-FMLA maternity leave policies across states and variation in which firms are covered by FMLA provisions. Using Vital Statistics data and difference-in-difference-in-difference methodology, I find that maternity leave led to small increases in birth weight, decreases in the likelihood of a premature birth, and substantial decreases in infant mortality for children of college-educated and married mothers, who were most able to take advantage of unpaid leave. My results are robust to the inclusion of numerous controls for maternal, child, and county characteristics, state, year, and month fixed effects, and state-year interactions, as well as across several different specifications. Copyright © 2011 Elsevier B.V. All rights reserved.

Marrying Up by Marrying Down: Status Exchange between Social Origin and Education in the United States.

PubMed

Schwartz, Christine R; Zeng, Zhen; Xie, Yu

2016-11-01

Intermarriage plays a key role in stratification systems. Spousal resemblance reinforces social boundaries within and across generations, and the rules of intermarriage govern the ways that social mobility may occur. We examine intermarriage across social origin and education boundaries in the United States using data from the 1968-2013 Panel Study of Income Dynamics. Our evidence points to a pattern of status exchange-that is, persons with high education from modest backgrounds tend to marry those with lower education from more privileged backgrounds. Our study contributes to an active methodological debate by pinpointing the conditions under which the results pivot from evidence against exchange to evidence for exchange and advances theory by showing that the rules of exchange are more consistent with the notion of diminishing marginal utility than the more general theory of compensating differentials.

Zoonotic viruses associated with illegally imported wildlife products

USGS Publications Warehouse

Smith, Kristine M.; Anthony, Simon J.; Switzer, William M.; Epstein, Jonathan H.; Seimon, Tracie; Jia, Hongwei; Sanchez, Maria D.; Huynh, Thanh Thao; Galland, G. Gale; Shapiro, Sheryl E.; Sleeman, Jonathan M.; McAloose, Denise; Stuchin, Margot; Amato, George; Kolokotronis, Sergios-Orestis; Lipkin, W. Ian; Karesh, William B.; Daszak, Peter; Marano, Nina

2012-01-01

The global trade in wildlife has historically contributed to the emergence and spread of infectious diseases. The United States is the world's largest importer of wildlife and wildlife products, yet minimal pathogen surveillance has precluded assessment of the health risks posed by this practice. This report details the findings of a pilot project to establish surveillance methodology for zoonotic agents in confiscated wildlife products. Initial findings from samples collected at several international airports identified parts originating from nonhuman primate (NHP) and rodent species, including baboon, chimpanzee, mangabey, guenon, green monkey, cane rat and rat. Pathogen screening identified retroviruses (simian foamy virus) and/or herpesviruses (cytomegalovirus and lymphocryptovirus) in the NHP samples. These results are the first demonstration that illegal bushmeat importation into the United States could act as a conduit for pathogen spread, and suggest that implementation of disease surveillance of the wildlife trade will help facilitate prevention of disease emergence.

Multi-port power router and its impact on resilient power grid systems

NASA Astrophysics Data System (ADS)

Kado, Yuichi; Iwatsuki, Katsumi; Wada, Keiji

2016-02-01

We propose a Y-configuration power router as a unit cell to easily construct a power delivery system that can meet many types of user requirements. The Y-configuration power router controls the direction and magnitude of power flow among three ports regardless of DC and AC. We constructed a prototype three-way isolated DC/DC converter that is the core unit of the Y-configuration power router and tested the power flow control operation. Experimental results revealed that our methodology based on the governing equation was appropriate for the power flow control of the three-way DC/DC converter. In addition, the hexagonal distribution network composed of the power routers has the ability to easily interchange electric power between autonomous microgrid cells. We also explored the requirements for communication between energy routers to achieve dynamic adjustments of energy flow in a coordinated manner and its impact on resilient power grid systems.

[Epidemiology of catheter-related infections in intensive care unit].

PubMed

Merrer, J

2005-03-01

Catheter-related infections remain an important cause of nosocomial infection in the ICU. They include colonization of the device, exit-site infection and catheter-related bloodstream infection with or without bacteraemia. Data from clinical studies and surveillance networks should be compared cautiously due to important methodological differences and wide variations of device-utilization ratio between units or countries. In France, two regional networks (C-CLIN Paris-Nord and C-CLIN Sud-Est) produced comparable and reproducible results. Colonization represents five-six cases per 1000 catheter-days and bacteraemia represents one case per 1000 catheter-days. Incidence rates from North American studies are usually four to five times higher. Numerous risk factors have been identified. Some of them could be used to stratify patients according to risk of catheter-related infection and to allow more valid comparison between ICU's performances. Participation of French ICUs to the recent national surveillance networks (REA RAISIN and REACAT RAISIN) should be encouraged.

Marrying Up by Marrying Down: Status Exchange between Social Origin and Education in the United States

PubMed Central

Schwartz, Christine R.; Zeng, Zhen; Xie, Yu

2016-01-01

Intermarriage plays a key role in stratification systems. Spousal resemblance reinforces social boundaries within and across generations, and the rules of intermarriage govern the ways that social mobility may occur. We examine intermarriage across social origin and education boundaries in the United States using data from the 1968–2013 Panel Study of Income Dynamics. Our evidence points to a pattern of status exchange—that is, persons with high education from modest backgrounds tend to marry those with lower education from more privileged backgrounds. Our study contributes to an active methodological debate by pinpointing the conditions under which the results pivot from evidence against exchange to evidence for exchange and advances theory by showing that the rules of exchange are more consistent with the notion of diminishing marginal utility than the more general theory of compensating differentials. PMID:28066795

Zoonotic Viruses Associated with Illegally Imported Wildlife Products

PubMed Central

Switzer, William M.; Epstein, Jonathan H.; Seimon, Tracie; Jia, Hongwei; Sanchez, Maria D.; Huynh, Thanh Thao; Galland, G. Gale; Shapiro, Sheryl E.; Sleeman, Jonathan M.; McAloose, Denise; Stuchin, Margot; Amato, George; Kolokotronis, Sergios-Orestis; Lipkin, W. Ian; Karesh, William B.; Daszak, Peter; Marano, Nina

2012-01-01

The global trade in wildlife has historically contributed to the emergence and spread of infectious diseases. The United States is the world's largest importer of wildlife and wildlife products, yet minimal pathogen surveillance has precluded assessment of the health risks posed by this practice. This report details the findings of a pilot project to establish surveillance methodology for zoonotic agents in confiscated wildlife products. Initial findings from samples collected at several international airports identified parts originating from nonhuman primate (NHP) and rodent species, including baboon, chimpanzee, mangabey, guenon, green monkey, cane rat and rat. Pathogen screening identified retroviruses (simian foamy virus) and/or herpesviruses (cytomegalovirus and lymphocryptovirus) in the NHP samples. These results are the first demonstration that illegal bushmeat importation into the United States could act as a conduit for pathogen spread, and suggest that implementation of disease surveillance of the wildlife trade will help facilitate prevention of disease emergence. PMID:22253731

Traction patterns of tumor cells.

PubMed

Ambrosi, D; Duperray, A; Peschetola, V; Verdier, C

2009-01-01

The traction exerted by a cell on a planar deformable substrate can be indirectly obtained on the basis of the displacement field of the underlying layer. The usual methodology used to address this inverse problem is based on the exploitation of the Green tensor of the linear elasticity problem in a half space (Boussinesq problem), coupled with a minimization algorithm under force penalization. A possible alternative strategy is to exploit an adjoint equation, obtained on the basis of a suitable minimization requirement. The resulting system of coupled elliptic partial differential equations is applied here to determine the force field per unit surface generated by T24 tumor cells on a polyacrylamide substrate. The shear stress obtained by numerical integration provides quantitative insight of the traction field and is a promising tool to investigate the spatial pattern of force per unit surface generated in cell motion, particularly in the case of such cancer cells.

The Effects of Maternity Leave on Children's Birth and Infant Health Outcomes in the United States

PubMed Central

Rossin, Maya

2013-01-01

This paper evaluates the impacts of unpaid maternity leave provisions of the 1993 Family and Medical Leave Act (FMLA) on children's birth and infant health outcomes in the United States. My identification strategy uses variation in pre-FMLA maternity leave policies across states and variation in which firms are covered by FMLA provisions. Using Vital Statistics data and difference-in-difference-in-difference methodology, I find that maternity leave led to small increases in birth weight, decreases in the likelihood of a premature birth, and substantial decreases in infant mortality for children of college-educated and married mothers, who were most able to take advantage of unpaid leave. My results are robust to the inclusion of numerous controls for maternal, child, and county characteristics, state and year fixed effects, and state-year interactions, as well as across several different specifications. PMID:21300415

Three-dimensional computer visualization of forensic pathology data.

PubMed

March, Jack; Schofield, Damian; Evison, Martin; Woodford, Noel

2004-03-01

Despite a decade of use in US courtrooms, it is only recently that forensic computer animations have become an increasingly important form of communication in legal spheres within the United Kingdom. Aims Research at the University of Nottingham has been influential in the critical investigation of forensic computer graphics reconstruction methodologies and techniques and in raising the profile of this novel form of data visualization within the United Kingdom. The case study presented demonstrates research undertaken by Aims Research and the Department of Forensic Pathology at the University of Sheffield, which aims to apply, evaluate, and develop novel 3-dimensional computer graphics (CG) visualization and virtual reality (VR) techniques in the presentation and investigation of forensic information concerning the human body. The inclusion of such visualizations within other CG or VR environments may ultimately provide the potential for alternative exploratory directions, processes, and results within forensic pathology investigations.

Risk factors for invasive fungal disease in critically ill adult patients: a systematic review

PubMed Central

2011-01-01

Introduction Over 5,000 cases of invasive Candida species infections occur in the United Kingdom each year, and around 40% of these cases occur in critical care units. Invasive fungal disease (IFD) in critically ill patients is associated with increased morbidity and mortality at a cost to both the individual and the National Health Service. In this paper, we report the results of a systematic review performed to identify and summarise the important risk factors derived from published multivariable analyses, risk prediction models and clinical decision rules for IFD in critically ill adult patients to inform the primary data collection for the Fungal Infection Risk Evaluation Study. Methods An internet search was performed to identify articles which investigated risk factors, risk prediction models or clinical decisions rules for IFD in critically ill adult patients. Eligible articles were identified in a staged process and were assessed by two investigators independently. The methodological quality of the reporting of the eligible articles was assessed using a set of questions addressing both general and statistical methodologies. Results Thirteen articles met the inclusion criteria, of which eight articles examined risk factors, four developed a risk prediction model or clinical decision rule and one evaluated a clinical decision rule. Studies varied in terms of objectives, risk factors, definitions and outcomes. The following risk factors were found in multiple studies to be significantly associated with IFD: surgery, total parenteral nutrition, fungal colonisation, renal replacement therapy, infection and/or sepsis, mechanical ventilation, diabetes, and Acute Physiology and Chronic Health Evaluation II (APACHE II) or APACHE III score. Several other risk factors were also found to be statistically significant in single studies only. Risk factor selection process and modelling strategy also varied across studies, and sample sizes were inadequate for obtaining reliable estimates. Conclusions This review shows a number of risk factors to be significantly associated with the development of IFD in critically ill adults. Methodological limitations were identified in the design and conduct of studies in this area, and caution should be used in their interpretation. PMID:22126425

Marrying Step Feed with Secondary Clarifier Improvements to Significantly Increase Peak Wet Weather Treatment Capacity: An Integrated Methodology.

PubMed

Daigger, Glen T; Siczka, John S; Smith, Thomas F; Frank, David A; McCorquodale, J A

2017-08-01

  The need to increase the peak wet weather secondary treatment capacity of the City of Akron, Ohio, Water Reclamation Facility (WRF) provided the opportunity to test an integrated methodology for maximizing the peak wet weather secondary treatment capacity of activated sludge systems. An initial investigation, consisting of process modeling of the secondary treatment system and computational fluid dynamics (CFD) analysis of the existing relatively shallow secondary clarifiers (3.3 and 3.7 m sidewater depth in 30.5 m diameter units), indicated that a significant increase in capacity from 416 000 to 684 000 m3/d or more was possible by adding step feed capabilities to the existing bioreactors and upgrading the existing secondary clarifiers. One of the six treatment units at the WRF was modified, and an extensive 2-year testing program was conducted to determine the total peak wet weather secondary treatment capacity achievable. The results demonstrated that a peak wet weather secondary treatment capacity approaching 974 000 m3/d is possible as long as secondary clarifier solids and hydraulic loadings could be separately controlled using the step feed capability provided. Excellent sludge settling characteristics are routinely experienced at the City of Akron WRF, raising concerns that the identified peak wet weather secondary treatment capacity could not be maintained should sludge settling characteristics deteriorate for some reason. Computational fluid dynamics analysis indicated that the impact of the deterioration of sludge settling characteristics could be mitigated and the identified peak wet weather secondary treatment capacity maintained by further use of the step feed capability provided to further reduce secondary clarifier solids loading rates at the identified high surface overflow rates. The results also demonstrated that effluent limits not only for total suspended solids (TSS) and five-day carbonaceous biochemical oxygen demand (cBOD5) could be maintained, but also for ammonia-nitrogen and total phosphorous (TP). Although hydraulic limitations in other parts of the WRP prevent this full capacity to be realized, the City is proceeding to implement the modifications identified using this integrated methodology.

Heliport noise model : methodology - draft report

DOT National Transportation Integrated Search

1988-04-30

The Heliport Noise Model (HNM) is the United States standard for predicting civil helicopter noise exposure in the vicinity of heliports and airports. HNM Version 1 is the culmination of several years of work in helicopter noise research, field measu...

Best Practices Handbook: Traffic Engineering in Range Networks

DTIC Science & Technology

2016-03-01

units of measurement. Measurement Methodology - A repeatable measurement technique used to derive one or more metrics of interest . Network...Performance measures - Metrics that provide quantitative or qualitative measures of the performance of systems or subsystems of interest . Performance Metric

Methodology to evaluate teen driver training programs : [brief].

DOT National Transportation Integrated Search

2014-03-01

In the United States, teenage drivers are more at risk of being involved in crashes than : any other age group. Statistics reveal a clear need for improving teenagers driving : skills, judgment and behavior. Driver education programs are a crucial...

Designing the next generation of robotic controllers

NASA Technical Reports Server (NTRS)

Goldstein, David G.

1994-01-01

The use of scenario-based, object-oriented software engineering methodologies in the next generation of robotic controllers is discussed. The controllers are intended to supplant the decades old technology currently embraced by the manufacturing industry of the United States.

Electromagnetic Induction Rediscovered Using Original Texts.

ERIC Educational Resources Information Center

Barth, Michael

2000-01-01

Describes a teaching unit on electromagnetic induction using historic texts. Uses some of Faraday's diary entries from 1831 to introduce the phenomenon of electromagnetic induction and teach about the properties of electricity, of taking conclusions from experiment, and scientific methodology. (ASK)

A bill to ensure that methodologies and technologies used by the Bureau of Customs and Border Protection to screen for and detect the presence of chemical, nuclear, biological, and radiological weapons in municipal solid waste are as effective as the methodologies and technologies used by the Bureau to screen for those materials in other items of commerce entering the United States through commercial motor vehicle transport.

THOMAS, 112th Congress

Sen. Levin, Carl [D-MI

2011-04-14

Senate - 04/14/2011 Read twice and referred to the Committee on Homeland Security and Governmental Affairs. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Recovery and purification process development for monoclonal antibody production

PubMed Central

Ma, Junfen; Winter, Charles; Bayer, Robert

2010-01-01

Hundreds of therapeutic monoclonal antibodies (mAbs) are currently in development, and many companies have multiple antibodies in their pipelines. Current methodology used in recovery processes for these molecules are reviewed here. Basic unit operations such as harvest, Protein A affinity chromatography and additional polishing steps are surveyed. Alternative processes such as flocculation, precipitation and membrane chromatography are discussed. We also cover platform approaches to purification methods development, use of high throughput screening methods, and offer a view on future developments in purification methodology as applied to mAbs. PMID:20647768

76 FR 3451 - Wage Methodology for the Temporary Non-agricultural Employment H-2B Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

...The Department of Labor (the Department or DOL) is amending its regulations governing the certification for the employment of nonimmigrant workers in temporary or seasonal non-agricultural employment. This Final Rule revises the methodology by which the Department calculates the prevailing wages to be paid to H-2B workers and United States (U.S.) workers recruited in connection with a temporary labor certification for use in petitioning the Department of Homeland Security (DHS) to employ a nonimmigrant worker in H-2B status.

The methodological features of studying energy efficiency of a combined mini-TPP on the basis of a gas-piston unit and a steam turbine

NASA Astrophysics Data System (ADS)

Shchinnikov, P. A.; Marasanov, N. V.

2017-07-01

The technology of electricity production by a mini-thermal power plant, operating on combined cycles of Otto and Rankine, is considered. The main aspects of the investigation methodology are outlined. It is shown that the design and layout parameters of all the major energy elements of the developed technology allow implementing it in a block and modular version; and the efficiency of electricity supply for the proposed technology will be at least 50 %.

Semantic Network Adaptation Based on QoS Pattern Recognition for Multimedia Streams

NASA Astrophysics Data System (ADS)

Exposito, Ernesto; Gineste, Mathieu; Lamolle, Myriam; Gomez, Jorge

This article proposes an ontology based pattern recognition methodology to compute and represent common QoS properties of the Application Data Units (ADU) of multimedia streams. The use of this ontology by mechanisms located at different layers of the communication architecture will allow implementing fine per-packet self-optimization of communication services regarding the actual application requirements. A case study showing how this methodology is used by error control mechanisms in the context of wireless networks is presented in order to demonstrate the feasibility and advantages of this approach.