Sequential dark and photo fermentation hydrogen production from hydrolyzed corn stover: A pilot test using 11 m3 reactor.

PubMed

Zhang, Quanguo; Zhang, Zhiping; Wang, Yi; Lee, Duu-Jong; Li, Gang; Zhou, Xuehua; Jiang, Danping; Xu, Bo; Lu, Chaoyang; Li, Yameng; Ge, Xumeng

2018-04-01

Pilot tests of sequential dark and photo fermentation H 2 production were for the first time conducted in a 11 m 3 reactor (3 m 3 for dark and 8 m 3 for photo compartments). A combined solar and light-emitting diode illumination system and a thermal controlling system was installed and tested. With dark fermentation unit maintained at pH 4.5 and 35 °C and photo fermentation unit at pH 7.0 and 30 °C, the overall biogas production rate using hydrolyzed corn stover as substrate reached 87.8 ± 3.8 m 3 /d with 68% H 2 content, contributed by dark unit at 7.5 m 3 -H 2 /m 3 -d and by photo unit at 4.7 m 3 /m 3 -d. Large variation was noted for H 2 production rate in different compartments of the tested units, revealing the adverse effects of poor mixing, washout, and other inhomogeneity associated with large reactor operations. Copyright © 2018 Elsevier Ltd. All rights reserved.

Independence of motor unit recruitment and rate modulation during precision force control.

PubMed

Kamen, G; Du, D C

1999-01-01

The vertebrate motor system chiefly employs motor unit recruitment and rate coding to modulate muscle force output. In this paper, we studied how the recruitment of new motor units altered the firing rate of already-active motor units during precision force production in the first dorsal interosseous muscle. Six healthy adults performed linearly increasing isometric voluntary contractions while motor unit activity and force output were recorded. After motor unit discharges were identified, motor unit firing rates were calculated before and after the instances of new motor unit recruitment. Three procedures were applied to compute motor unit firing rate, including the mean of a fixed number of inter-spike intervals and the constant width weighted Hanning window filter method, as well as a modified boxcar technique. In contrast to previous reports, the analysis of the firing rates of over 200 motor units revealed that reduction of the active firing rates was not a common mechanism used to accommodate the twitch force produced by the recruitment of a new motor unit. Similarly, during de-recruitment there was no tendency for motor unit firing rates to increase immediately following the cessation of activity in other motor units. Considerable consistency in recruitment behavior was observed during repeated contractions. However, firing rates during repeated contractions demonstrated considerably more fluctuation. It is concluded that the neuromuscular system does not use short-term preferential motor unit disfacilitation to effect precise regulation of muscular force output.

Structural, compositional, and sensorial properties of United States commercial ice cream products.

PubMed

Warren, Maya M; Hartel, Richard W

2014-10-01

Commercial vanilla ice cream products from the United States (full fat, low fat, and nonfat) were analyzed for their structural, behavioral (i.e., melt rate and drip-through), compositional, and sensorial attributes. Mean size distributions of ice crystals and air cells, drip-through rates, percent partially coalesced fat, percent overrun and total fat, and density were determined. A trained panel carried out sensory analyses in order to determine correlations between ice cream microstructure attributes and sensory properties using a Spectrum(TM) descriptive analysis. Analyses included melt rate, breakdown, size of ice particulates (iciness), denseness, greasiness, and overall creaminess. To determine relationships and interactions, principle component analysis and multivariate pairwise correlation were performed within and between the instrumental and sensorial data. Greasiness and creaminess negatively correlated with drip-through rate and creaminess correlated with percent total fat and percent fat destabilization. Percent fat did not determine the melt rate on a sensorial level. However, drip-through rate at ambient temperatures was predicted by total fat content of the samples. Based on sensory analysis, high-fat products were noted to be creamier than low and nonfat products. Iciness did not correlate with mean ice crystal size and drip-through rate did not predict sensory melt rate. Furthermore, on a sensorial level, greasiness positively correlated with total percent fat destabilization and mean air cell size positively correlated with denseness. These results indicate that commercial ice cream products vary widely in composition, structure, behavior, and sensory properties. There is a wide range of commercial ice creams in the United States market, ranging from full fat to nonfat. In this research we showed that these ice creams vary greatly in their microstructures, behaviors (the melt/drip-though, collapse, and/or stand up properties of ice cream products at ambient temperatures), and sensory properties. © 2014 Institute of Food Technologists®

Determining optimal selling price and lot size with process reliability and partial backlogging considerations

NASA Astrophysics Data System (ADS)

Hsieh, Tsu-Pang; Cheng, Mei-Chuan; Dye, Chung-Yuan; Ouyang, Liang-Yuh

2011-01-01

In this article, we extend the classical economic production quantity (EPQ) model by proposing imperfect production processes and quality-dependent unit production cost. The demand rate is described by any convex decreasing function of the selling price. In addition, we allow for shortages and a time-proportional backlogging rate. For any given selling price, we first prove that the optimal production schedule not only exists but also is unique. Next, we show that the total profit per unit time is a concave function of price when the production schedule is given. We then provide a simple algorithm to find the optimal selling price and production schedule for the proposed model. Finally, we use a couple of numerical examples to illustrate the algorithm and conclude this article with suggestions for possible future research.

78 FR 1260 - Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... DEPARTMENT OF LABOR Employment and Training Administration Labor Certification Process for the Temporary Employment of Aliens in Agriculture in the United States: Prevailing Wage Rates for Certain... Agriculture (USDA) farm production region that includes another State either with its own wage rate finding or...

Forest nursery production in the United Kingdom: Case study Maelor Nurseries Ltd.

Treesearch

Jacqueline L. Fisher

2002-01-01

Forest policy in the United Kingdom does not list timber production as a main objective, despite the fact that the country is heavily reliant on imports of timber products. The level of new conifer planting has been much reduced over the last ten years; timber prices are very low due to the high rate of sterling; competition from imports is high; devolution plus the...

Annotated bibliography and index map of sulfur and pyrites deposits in the United States and Alaska (including references to July 1, 1951)

USGS Publications Warehouse

Espenshade, Gilbert H.; Broedel, Carl H.

1952-01-01

Since the end of World War II, the pattern of sulfur production and consumption in the United States and abroad has changed markedly from the pattern that existed before the war. Although production of sulfur in the United States in 1950 was more than double the average annual production for the 1935-39 period, consumption had increased at such a rate that current domestic and foreign demand for U. S. sulfur exceeds the productive capacity of the industry. Production of sulfur (including brimstone, pyrites, and all other forms) in the 1935-39 period and in 1950 are compared in the table below.

Water and Nutrient Effects on Loblolly Pine Production and Stand Development on a Sandhill Site

Treesearch

H.L. Allen; T. J. Albaugh; Kurt H. Johnsen

2002-01-01

During the last decade, it has become apparent that production rates of pine plantations in the southeastern United States are far below levels that are biologically and economically optimal. By managing genetic and site resource effectively, production rates should exceed 350 ft3/ acre/year on most sites. In effort to better understand the...

Criterion 6, indicator 33 : recovery or recycling of forest products as a percentage of total forest products consumption

Treesearch

Ken Skog; James Howard; Rebecca Westby

2011-01-01

This indicator shows the trend in recovering wood and paper for reuse in products in the United States. This reuse can hold down the need to harvest wood to meet U.S. consumption needs. The paper recycling rate (utilization rate in producing new paper) increased from 22% to 38% between 1970 and 1996, but then stabilized at 37% to 38% between 1996 and 2006. This rate...

Power laws in cone production of longleaf pine across its native range in the United States

Treesearch

Xiongwen Chen; Qinfeng Guo; Dale G. Brockway

2017-01-01

Longleaf pine (Pinus palustris Mill.) forests in the southeastern United States are considered endangered ecosystems, because of their dramatic decrease in area since European colonization and poor rates of recovery related to episodic natural regeneration. Sporadic seed production constrains restoration efforts and complicates sustainable management of this species....

Hand hygiene compliance rates in the United States--a one-year multicenter collaboration using product/volume usage measurement and feedback.

PubMed

McGuckin, Maryanne; Waterman, Richard; Govednik, John

2009-01-01

Hand hygiene (HH) is the single most important factor in the prevention of health care-acquired infections. The 3 most frequently reported methods of measuring HH compliance are: (1) direct observation, (2) self-reporting by health care workers (HCWs), and (3) indirect calculation based on HH product usage. This article presents the results of a 12-month multicenter collaboration assessing HH compliance rates at US health care facilities by measuring product usage and providing feedback about HH compliance. Our results show that HH compliance at baseline was 26% for intensive care units (ICUs) and 36% for non-ICUs. After 12 months of measuring product usage and providing feedback, compliance increased to 37% for ICUs and 51% for non-ICUs. (ICU, P = .0119; non-ICU, P < .001). HH compliance in the United States can increase when monitoring is combined with feedback. However, HH still occurs at or below 50% compli- ance for both ICUs and non-ICUs.

Trends in Medicaid Reimbursements for Insulin From 1991 Through 2014.

PubMed

Luo, Jing; Avorn, Jerry; Kesselheim, Aaron S

2015-10-01

Insulin is a vital medicine for patients with diabetes mellitus. Newer, more expensive insulin products and the lack of generic insulins in the United States have increased costs for patients and insurers. To examine Medicaid payment trends for insulin products. Cost information is available for all 50 states and has been recorded since the 1990s. A time-series analysis comparing reimbursements and prices. Using state- and national-level Medicaid data from 1991 to 2014, we identified all patients who used 1 or more of the 16 insulin products that were continuously available in the United States between 2006 and 2014. Insulin products were classified into rapid-acting and long-acting analogs, short-acting, intermediate, and premixed insulins based on American Diabetes Association Guidelines. Inflation-adjusted payments made to pharmacies by Medicaid per 1 mL (100 IU) of insulin in 2014 US dollars. Since 1991, Medicaid reimbursement per unit (1 mL) of insulin dispensed has risen steadily. In the 1990s, Medicaid reimbursed pharmacies between $2.36 and $4.43 per unit. By 2014, reimbursement for short-acting insulins increased to $9.64 per unit; intermediate, $9.22; premixed, $14.79; and long-acting, $19.78. Medicaid reimbursement for rapid-acting insulin analogs rose to $19.81 per unit. The rate of increase in reimbursement was higher for insulins with patent protection ($0.20 per quarter) than without ($0.05 per quarter) (P<.001).Total Medicaid reimbursements peaked at $407.4 million dollars in quarter 2 of 2014. Total volume peaked at 29.9 million units in quarter 4 of 2005 and was 21.2 million units in quarter 2 of 2014. Between 1991 and 2014, there was a near-exponential upward trend in Medicaid payments on a per-unit basis for a wide variety of insulin products regardless of formulation, duration of action, and whether the product was patented. Although reimbursements for newer, patent-protected insulin analogs increased at a faster rate than reimbursements for older insulins, payments increased for all products we examined. Our findings suggest a lack of price competition in the United States for this class of medications.

76 FR 9542 - Stainless Steel Sheet and Strip in Coils From Mexico; Notice of Amended Final Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-18

... investigation; and (4) the cash deposit rate for all non-Mexican exporters will be the rate applicable to the...-unit cost of production and per-unit packing expenses by the quantity sold. See Mexinox Ministerial.... indirect selling expenses. Specifically, Mexinox contends that the Department a) failed to include ``other...

Industrial wood productivity in the United States, 1900-1998

Treesearch

Peter J. Ince

2000-01-01

The productivity of U.S. wood and paper product output in terms of wood input is computed and displayed in graphs. Background tables provide supporting data. The productivity trend parallels trends in the recovered paper utilization rate. Recycling and wood residue use are key factors in productivity gains.

Development of a mathematical model for physical disintegration of flushable consumer products in wastewater systems.

PubMed

Karadagli, Fatih; McAvoy, Drew C; Rittmann, Bruce E

2009-05-01

The processes that flushable solid products may undergo after discharge to wastewater systems are (1) physical disintegration of solids resulting from turbulence, (2) direct dissolution of water-soluble components, (3) hydrolysis of solids to form soluble components, and (4) biodegradation of soluble and insoluble components. We develop a mathematical model for physical disintegration of flushable solid consumer products and test it with two different flushable products--product A, which has 40% water soluble-content, and product B, which has no water-soluble components. We present our modeling analysis of experimental results, from which we computed disintegration rate constants and fractional distribution coefficients for the disintegration of larger solids. The rate constants for solids of product A in units of (hour(-1)) are 0.45 for > 8-mm, 2.25 x 10(-2) for 4- to 8-mm, 0.9 x 10(-2) for 2- to 4-mm, and 1.26 x 10(-2) for 1- to 2-mm solids. The rate constants for solids of product B in units of hour(-1) are 1.8 for > 8-mm, 1.8 for 4- to 8-mm, 3.6 x 10(-1) for 2- to 4-mm, and 2.25 x 10(-3) for 1- to 2-mm solids. As indicated by the rate constants, larger solids disintegrate at a faster rate than smaller solids. In addition, product B disintegrated much faster and went mostly to the smallest size range, while product A disintegrated more slowly and was transferred to a range of intermediate solid sizes.

Helicopter logging productivity on harvesting operations in southeast Alaska, using ecologically based silvicultural prescriptions.

Treesearch

L. Christian; A. Brackley

2007-01-01

This study examines production rates and costs for felling and helicopter yarding on eight units harvested in accordance with ecologically based silvicultural prescriptions. The units represent five levels of basal area retention. The levels of retention had irregular spatial arrangements caused by gaps and clumps that ranged from 0 percent retention (clearcut) to 75...

Uptake of 15N labeled fertilizer in loblolly pine plantations of the southern United States

Treesearch

Jay E. Raymond; Thomas Fox; Brian Strahm

2015-01-01

Forests in the southeastern United States managed extensively (minimal silvicultural treatments) generally have low productivity rates (Fox and others 2007). Conversely, intensively managed stands have significantly increased productivity in this region, from 2 m3 ha-1 year -1 to a range of 6 to 10 m3 ha-1 year -1 (Fox and others 2007).

Recycling of wood and paper products in the United States

Treesearch

Peter J. Ince

1996-01-01

This report describes the current status of wood and paper recycling in the United States and predicts the production and market consequences of increased recycling. The results suggest that the rate of paper recycling will rapidly rise in the 1990s, mainly as a result of the competitive evolution of fiber markets and papermaking technologies. The consumption and...

Transfusion Patterns in All Patients Admitted to the Intensive Care Unit and in Those Who Die in Hospital: A Descriptive Analysis.

PubMed

Shehata, Nadine; Forster, Alan J; Lawrence, Nadine; Ducharme, Robin; Fergusson, Dean A; Chassé, Michaël; Rothwell, Deanna M; Hébert, Paul C; Tinmouth, Alan T; Wilson, Kumanan

2015-01-01

While it is known that the use of health care resources increases at the end of life in patients admitted to the Intensive Care Unit (ICU), the allocation of blood products at the end of life has not been described. The objective of this study was to describe overall transfusion patterns in the ICU, and specifically in patients who die in hospital. We conducted a retrospective cohort study of adult patients admitted to the ICU of a university-affiliated hospital, who were discharged or died between November 1, 2006 and June 30, 2012. During the study period, 10,642 patients were admitted at least once to the ICU. Of these patients, 4079 (38.3%) received red blood cells (RBCs), plasma or platelets in the ICU. The ICU mortality rate was 28.1% and in-hospital mortality rate was 32.3%. Among 39,591 blood product units transfused over the course of the study in the ICU (18,144 RBC units, 16,920 plasma units and 4527 platelet units), 46.2% were administered to patients who later died within the same hospitalization (41.2% of RBCs, 50.4% of plasma and 50.8% of platelets). Of all blood product units (RBCs, plasma and platelets) administered in the ICU over the study period, 11% were given within the last 24 hours before death. A large proportion of blood products used in the ICU are administered to patients who ultimately succumb to their illness in hospital, and many of these blood units are given in close proximity to death.

Evaluation of the Level of Food Safety Protection Provided by the U.S. Grade "A" Pasteurized Milk Ordinance and Its Associated Cooperative Grade "A" Milk Safety Program.

PubMed

Ma, Yinqing; Klontz, Karl C; DiNovi, Michael J; Edwards, Alison J; Hennes, Robert F

2015-08-01

The present study was conducted to evaluate the level of food safety protection provided to consumers of Grade "A" milk and milk products in the United States by the National Conference on Interstate Milk Shipments (NCIMS) Grade "A" Milk Safety Program through its implementation and enforcement of the U.S. Grade "A" Pasteurized Milk Ordinance (PMO). The number of reported illnesses associated with Grade "A" milk and milk products in the United States was obtained from state and federal agencies and published articles. The consumption of Grade "A" milk and milk products in the United States was estimated from food consumption survey data for individuals. The level of food safety protection was measured quantitatively using the metric of annual illness attack rate. During a 15-year period (1999 through 2013), the estimated annual illness attack rate was 0.41 reported illnesses per 1 billion exposures (estimated using person-day intake data) or 0.52 reported illnesses per 1 billion lb (454 million kg) of Grade "A" milk and milk products consumed. Food safety protection provided to consumers of Grade "A" milk and milk products by the NCIMS through its implementation and enforcement of the PMO is important given the common consumption of Grade "A" milk and milk products in the United States.

Direct Measurements of the Ozone Production Rate: Methods, Measurements, and Implications for Air Quality Monitoring

NASA Astrophysics Data System (ADS)

Brune, W. H.; Baier, B.; Miller, D. O.; Apel, E. C.; Wisthaler, A.; Fried, A.; Cantrell, C. A.; Blake, D. R.; Brown, S. S.; McDuffie, E. E.; Kaser, L.; Long, R.; Weinheimer, A. J.

2017-12-01

Ground level ozone pollution remains a health hazard in the United States despite dramatic reductions due to regulatory actions over the past three decades. The key to understanding the link between the ozone precursor gases, nitrogen oxides (NOx) and volatile organic compounds (VOCs), and ozone pollution is the ozone production rate. However, in air quality models, uncertainties in emissions and meteorology hide the true sensitivity of modeled ozone to the chemistry of the ozone production rate. A better way to understand the ozone production rate is to measure it directly. We devised a method for measuring the ozone production rate directly and have deployed it in a few field studies. In this presentation, we will discuss some fairly recent observations, the strengths and weaknesses of the current method, and a path toward routine monitoring of the ozone production rate.

Assessing the coal resources of the United States

USGS Publications Warehouse

Gluskoter, Harold J.; Flores, R.M.; Hatch, J.; Kirschbaum, M.A.; Ruppert, L.F.; Warwick, Peter D.

1996-01-01

In 1994, coal production in the United States reached the highest level in history (slightly more than 909 million metric tons or one billion short tons), continuing the upward trend of coal production and utilization that began 34 years ago. Previous assessments of the coal resources of the United States, which were completed as early as 1909, clearly indicated that the total coal resources of the Nation are large and that utilization at the current rate will not soon deplete them.

78 FR 37516 - Notice of a Request for Extension of a Currently Approved Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-21

...) required to enter sugar and sugar-containing products under tariff-rate quotas (TRQs) into the United... fiscal year the quantity of sugars and syrups that may be entered at the lower tariff rates of TRQs. This... United States has agreed to require CQEs for the entry into U.S. customs territory of sugar and sugar...

Organic-matter production and preservation and evolution of anoxia in the Holocene Black Sea

USGS Publications Warehouse

Arthur, M.A.; Dean, W.E.

1998-01-01

Dating of sediments collected in gravity cores during Leg 1 of the 1988 R/V Knorr expedition to the Black Sea suggests that the onset of water-column anoxia at ???7.5 ka was virtually synchronous across the basin over a depth range of ???200 - 2250 m. A finely laminated, organic carbon (OC) rich sapropel (unit II) was produced as a result of this anoxia. The trigger for increased OC production and development of anoxia was the spillover of saline waters through the Bosporus that probably began at ???9.0 ka and peaked between ???7.0 and 5.5 ka. This spillover enhanced vertical mixing and nutrient cycling and caused a short-term (2-3 kyr) burst in surface-water productivity during the early part of unit II deposition. Continued incursion of saline waters enhanced vertical stability and inhibited mixing of nutrients into surface waters, thus limiting primary production and decreasing the OC flux to sediments beginning ???5.5 ka. Concentration, accumulation rate, and degree of preservation of organic matter all decreased in the upper part of unit II as a result of decreasing productivity, but anoxia persisted throughout most of the water column. The end of unit II sapropel deposition was synchronous across the Black Sea as the result of the first blooms of the coccolith Emiliania huxleyi, which presumably marked an increase in surface-water salinity above 11 and the beginning of unit I deposition. The high coccolith-carbonate fluxes that occurred during deposition of unit I diluted the OC concentration in the sediments, but OC accumulation rates are about the same as those in upper part of unit II.

Homogenous Surface Nucleation of Solid Polar Stratospheric Cloud Particles

NASA Technical Reports Server (NTRS)

Tabazadeh, A.; Hamill, P.; Salcedo, D.; Gore, Warren J. (Technical Monitor)

2002-01-01

A general surface nucleation rate theory is presented for the homogeneous freezing of crystalline germs on the surfaces of aqueous particles. While nucleation rates in a standard classical homogeneous freezing rate theory scale with volume, the rates in a surface-based theory scale with surface area. The theory is used to convert volume-based information on laboratory freezing rates (in units of cu cm, seconds) of nitric acid trihydrate (NAT) and nitric acid dihydrate (NAD) aerosols into surface-based values (in units of sq cm, seconds). We show that a surface-based model is capable of reproducing measured nucleation rates of NAT and NAD aerosols from concentrated aqueous HNO3 solutions in the temperature range of 165 to 205 K. Laboratory measured nucleation rates are used to derive free energies for NAT and NAD germ formation in the stratosphere. NAD germ free energies range from about 23 to 26 kcal mole, allowing for fast and efficient homogeneous NAD particle production in the stratosphere. However, NAT germ formation energies are large (greater than 26 kcal mole) enough to prevent efficient NAT particle production in the stratosphere. We show that the atmospheric NAD particle production rates based on the surface rate theory are roughly 2 orders of magnitude larger than those obtained from a standard volume-based rate theory. Atmospheric volume and surface production of NAD particles will nearly cease in the stratosphere when denitrification in the air exceeds 40 and 78%, respectively. We show that a surface-based (volume-based) homogeneous freezing rate theory gives particle production rates, which are (not) consistent with both laboratory and atmospheric data on the nucleation of solid polar stratospheric cloud particles.

Crossbreeding: implications for dairy cow fertility and survival.

PubMed

Buckley, F; Lopez-Villalobos, N; Heins, B J

2014-05-01

In pasture-based seasonal calving systems, failure to become pregnant during the breeding season results in important economic losses as maximum profit is attained by minimising costs and increasing the proportion of grass in the diet of the lactating dairy cow. In the United States, dairy producers primarily strive to maximise production potential but are becoming increasingly aware of the economic consequences of sub-optimal cow fertility and survival. For this reason, interest in crossbreeding is emerging. The objective of this paper is to review the fertility and survival outcomes reported from recent research studies and data analyses in Ireland, New Zealand and the United States. Research conducted in Ireland during the early 2000s concluded that of three 'alternative' dairy breeds the Norwegian Red was most suited to seasonal grass-based production. A key finding was favourable fertility and survival. A follow-up study confirmed a fertility advantage with Norwegian Red×Holstein-Friesian compared with Holstein-Friesian: proportion pregnant to first service; +0.08 and in-calf after 6 weeks breeding; +0.11. Another study found higher fertility with Jersey crossbreds: pregnant to first service; +0.21, and in-calf after 6 weeks breeding; +0.19. Studies conducted in Northern Ireland also found superior fertility performance with Jersey crossbred cows offered low and moderate concentrate diets. In New Zealand, crossbred dairy cattle (primarily Jersey×Friesian) are achieving similar rates of genetic gain for farm profit as the purebred populations, but creating additional gain derived from economic heterosis. In the United States, analysis of commercial data from California showed higher first-service conception rates for Scandinavian Red×Holstein (+6 percentage units) and Montbeliarde×Holstein (+10 percentage units) compared with Holstein (23%). They also exhibited fewer days open and greater survival. At Penn State University, Brown Swiss×Holstein cows had 17 fewer days open than Holstein cows during first lactation, and numerically fewer in second (12 days) and third lactation (6 days). At the University of Minnesota, crossbred cows had 21 percentage units higher first-service conception rates, 41 fewer days open and 12 percentage units higher in-calf rates compared with pure Holstein cows. They also had greater survival to second (+13 percentage units), third (+24 percentage units), fourth (+25 percentage units) and fifth (+17 percentage units) lactation. The literature clearly illustrates favourable animal performance benefits from crossbreeding, using a range of modern breeds, and within the context of both grass-based and high-input confinement production environments. Economic analyses generally indicate profitable performance owing to lower replacement cost and higher herd productivity.

Synthesis on construction unit cost development : technical report.

DOT National Transportation Integrated Search

2009-01-01

Availability of historical unit cost data is an important factor in developing accurate project cost estimates. : State highway agencies (SHAs) collect data on historical bids and/or production rates, crew sizes and mixes, : material costs, and equip...

Establishment of a medium-scale mosquito facility: tests on mass production cages for Aedes albopictus (Diptera: Culicidae).

PubMed

Zhang, Dongjing; Li, Yongjun; Sun, Qiang; Zheng, Xiaoying; Gilles, Jeremie R L; Yamada, Hanano; Wu, Zhongdao; Xi, Zhiyong; Wu, Yu

2018-03-19

Mass egg production is an important component of Aedes albopictus mosquito control programs, such as the sterile insect technique and incompatible insect technique, which requires the releases of large number of sterile males. Developing standard operating procedures and optimized cages for adult maintenance of Ae. albopictus can improve the mass rearing efficiency. Three different sex ratios of females to males with a total number of 4,000 mosquitoes were tested by evaluating the insemination rate, egg production (total number of eggs per cage), female fecundity and egg hatch rate in small cage (30 × 30 × 30 cm). Blood meals with adenosine triphosphate (ATP, 0.05 g/ml), cage structures (Big cage A: 90 × 30 × 30 cm; Big cage B: 90 × 30 × 50 cm or 90 × 50 × 30 cm) and rearing densities (12,000, 16,000 and 20,000 mosquitoes, corresponding to 0.9 cm 2 /mosquito, 0.675 cm 2 /mosquito and 0.54 cm 2 /mosquito, respectively) were also tested and evaluated on the basis of egg production, female fecundity and egg hatch rate. An adult rearing unit holding 15 of Big cage A with optimal egg production was designed to produce 10 million eggs per rearing cycle in a 1.8 m 2 space. Female to male ratios at 3:1 in small cages resulted in higher egg production but did not affect insemination rate, female fecundity and egg hatch rate. A concentration of 0.05 g/ml of ATP added to blood meals improved the blood-feeding frequency and thus increased the overall egg production per cage. Cage structures affected the egg production per cage, but not egg hatch rate. A medium rearing density at 0.675 cm 2 /mosquito (16,000 mosquitoes) resulted in higher egg production compared to both low and high densities. An adult rearing unit for Ae. albopictus on the basis of Big cage A has been developed with the capacity of producing 10 million eggs within 15 days. Our results have indicated that the adult rearing methods and adult maintenance unit are recommended for Ae. albopictus mass rearing in support of the establishment of a medium-sized mosquito factory.

Neurospora discreta as a model to assess adaptation of soil fungi to warming.

PubMed

Romero-Olivares, Adriana L; Taylor, John W; Treseder, Kathleen K

2015-09-16

Short-term experiments have indicated that warmer temperatures can alter fungal biomass production and CO2 respiration, with potential consequences for soil C storage. However, we know little about the capacity of fungi to adapt to warming in ways that may alter C dynamics. Thus, we exposed Neurospora discreta to moderately warm (16 °C) and warm (28 °C) selective temperatures for 1500 mitotic generations, and then examined changes in mycelial growth rate, biomass, spore production, and CO2 respiration. We tested the hypothesis that strains will adapt to its selective temperature. Specifically, we expected that adapted strains would grow faster, and produce more spores per unit biomass (i.e., relative spore production). In contrast, they should generate less CO2 per unit biomass due to higher efficiency in carbon use metabolism (i.e., lower mass specific respiration, MSR). Indeed, N. discreta adapted to warm temperatures, based on patterns of relative spore production. Adapted strains produced more spores per unit biomass than parental strains in the selective temperature. Contrary to our expectations, this increase in relative spore production was accompanied by an increase in MSR and a reduction in mycelial growth rate and biomass, compared to parental strains. Adaptation of N. discreta to warm temperatures may have elicited a tradeoff between biomass production and relative spore production, possibly because relative spore production required higher MSR rates. Therefore, our results do not support the idea that adaptation to warm temperatures will lead to a more efficient carbon use metabolism. Our data might help improve climate change model simulations and provide more concise predictions of decomposition processes and carbon feedbacks to the atmosphere.

An expert system for estimating production rates and costs for hardwood group-selection harvests

Treesearch

Chris B. LeDoux; B. Gopalakrishnan; R. S. Pabba

2003-01-01

As forest managers shift their focus from stands to entire ecosystems alternative harvesting methods such as group selection are being used increasingly. Results of several field time and motion studies and simulation runs were incorporated into an expert system for estimating production rates and costs associated with harvests of group-selection units of various size...

Production rates and costs of cable yarding wood residue from clearcut units

Treesearch

Chris B. LeDoux

1984-01-01

Wood residue is a little used source of fiber, chips, and fuel because harvest costs are largely unknown. This study calculates incremental production rates and costs for yarding and loading logging residue in clearcut old-growth Douglas-fir/western hemlock forests. Harvest operations were observed for two timber sales in western Oregon. Three different cable yarding...

Vietnam PNTR Status and WTO Accession: Issues and Implications for the United States

DTIC Science & Technology

2006-08-02

footwear, wooden furniture, frozen shrimp, petroleum products, cashew nuts , coffee Major Exports to Vietnam aircraft, mining equipment, electronic...agricultural products (including beef, pork, dairy, fruits, nuts , processed foods, soybean products, cotton and hides and skins, and grains) to rates of 15% or

Composition and production rate of pharmaceutical and chemical waste from Xanthi General Hospital in Greece.

PubMed

Voudrias, Evangelos; Goudakou, Lambrini; Kermenidou, Marianthi; Softa, Aikaterini

2012-07-01

The objective of this work was to determine the composition and production rates of pharmaceutical and chemical waste produced by Xanthi General Hospital in Greece (XGH). This information is important to design and cost management systems for pharmaceutical and chemical waste, for safety and health considerations and for assessing environmental impact. A total of 233 kg pharmaceutical and 110 kg chemical waste was collected, manually separated and weighed over a period of five working weeks. The total production of pharmaceutical waste comprised 3.9% w/w of the total hazardous medical waste produced by the hospital. Total pharmaceutical waste was classified in three categories, vial waste comprising 51.1%, syringe waste with 11.4% and intravenous therapy (IV) waste with 37.5% w/w of the total. Vial pharmaceutical waste only was further classified in six major categories: antibiotics, digestive system drugs, analgesics, hormones, circulatory system drugs and "other". Production data below are presented as average (standard deviation in parenthesis). The unit production rates for total pharmaceutical waste for the hospital were 12.4 (3.90) g/patient/d and 24.6 (7.48) g/bed/d. The respective unit production rates were: (1) for vial waste 6.4 (1.6) g/patient/d and 13 (2.6) g/bed/d, (2) for syringe waste 1.4 (0.4) g/patient/d and 2.8 (0.8) g/bed/d and (3) for IV waste 4.6 (3.0) g/patient/d and 9.2 (5.9) g/bed/d. Total chemical waste was classified in four categories, chemical reagents comprising 18.2%, solvents with 52.3%, dyes and tracers with 18.2% and solid waste with 11.4% w/w of the total. The total production of chemical waste comprised 1.8% w/w of the total hazardous medical waste produced by the hospital. Thus, the sum of pharmaceutical and chemical waste was 5.7% w/w of the total hazardous medical waste produced by the hospital. The unit production rates for total chemical waste for the hospital were 5.8 (2.2) g/patient/d and 1.1 (0.4) g/exam/d. The respective unit production rates were: (1) for reagents 1.7 (2.4) g/patient/d and 0.3 (0.4) g/examination/d, (2) for solvents 248 (127) g/patient/d and 192 (101) g/examination/d, (3) for dyes and tracers 4.7 (1.4) g/patient/d and 2.5 (0.9) g/examination/d and (4) for solid waste 54 (28) g/patient/d and 42 (22) g/examination/d. Copyright © 2012 Elsevier Ltd. All rights reserved.

7 CFR 52.777 - Ascertaining the rating for the factors which are scored.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Canned Red Tart...

Cosmetic surgery growth and correlations with financial indices: a comparative study of the United Kingdom and United States from 2002-2011.

PubMed

Nassab, Reza; Harris, Paul

2013-05-01

Over the past 10 years, there has been significant fluctuation in the yearly growth rates for cosmetic surgery procedures in both the United States and the United Kingdom. The authors compare cosmetic surgical procedure rates in the United Kingdom and United States with the macroeconomic climate of each region to determine whether there is a direct relationship between cosmetic surgery rates and economic health. The authors analyzed annual cosmetic surgery statistics from the British Association of Aesthetic Plastic Surgeons and the American Society for Aesthetic Plastic Surgery for 2002-2011 against economic indices from both regions, including the gross domestic product (GDP), consumer prices indices (CPI), and stock market reports. There was a 285.9% increase in the United Kingdom and a 1.1% increase in the United States in the number of procedures performed between 2002 and 2011. There were significant positive correlations between the number of cosmetic procedures performed in the United Kingdom and both the GDP (r = 0.986, P < .01) and CPI (r = 0.955, P < .01). Analysis of the US growth rates failed to show a significant relationship with any indices. UK interest rates showed a significant negative correlation (r = -0.668, P < .05) with procedures performed, whereas US interest rates showed a significant positive correlation. Data from the United States and United Kingdom suggest 2 very different growth patterns in the number of cosmetic surgeries being performed as compared with the economy in each region. Economic indices are accurate indicators of numbers of procedures being performed in the United Kingdom, whereas rates in the United States seem independent of those factors.

Detection rates of the MODIS active fire product in the United States

USGS Publications Warehouse

Hawbaker, T.J.; Radeloff, V.C.; Syphard, A.D.; Zhu, Z.; Stewart, S.I.

2008-01-01

MODIS active fire data offer new information about global fire patterns. However, uncertainties in detection rates can render satellite-derived fire statistics difficult to interpret. We evaluated the MODIS 1??km daily active fire product to quantify detection rates for both Terra and Aqua MODIS sensors, examined how cloud cover and fire size affected detection rates, and estimated how detection rates varied across the United States. MODIS active fire detections were compared to 361 reference fires (??? 18??ha) that had been delineated using pre- and post-fire Landsat imagery. Reference fires were considered detected if at least one MODIS active fire pixel occurred within 1??km of the edge of the fire. When active fire data from both Aqua and Terra were combined, 82% of all reference fires were found, but detection rates were less for Aqua and Terra individually (73% and 66% respectively). Fires not detected generally had more cloudy days, but not when the Aqua data were considered exclusively. MODIS detection rates decreased with fire size, and the size at which 50% of all fires were detected was 105??ha when combining Aqua and Terra (195??ha for Aqua and 334??ha for Terra alone). Across the United States, detection rates were greatest in the West, lower in the Great Plains, and lowest in the East. The MODIS active fire product captures large fires in the U.S. well, but may under-represent fires in areas with frequent cloud cover or rapidly burning, small, and low-intensity fires. We recommend that users of the MODIS active fire data perform individual validations to ensure that all relevant fires are included. ?? 2008 Elsevier Inc. All rights reserved.

The rate of decay of fresh fission products from a nuclear reactor

NASA Astrophysics Data System (ADS)

Dolan, David J.

Determining the rate of decay of fresh fission products from a nuclear reactor is complex because of the number of isotopes involved, different types of decay, half-lives of the isotopes, and some isotopes decay into other radioactive isotopes. Traditionally, a simplified rule of 7s and 10s is used to determine the dose rate from nuclear weapons and can be to estimate the dose rate from fresh fission products of a nuclear reactor. An experiment was designed to determine the dose rate with respect to time from fresh fission products of a nuclear reactor. The experiment exposed 0.5 grams of unenriched Uranium to a fast and thermal neutron flux from a TRIGA Research Reactor (Lakewood, CO) for ten minutes. The dose rate from the fission products was measured by four Mirion DMC 2000XB electronic personal dosimeters over a period of six days. The resulting dose rate following a rule of 10s: the dose rate of fresh fission products from a nuclear reactor decreases by a factor of 10 for every 10 units of time.

Early resuscitation intensity as a surrogate for bleeding severity and early mortality in the PRospective, Observational, Multicenter, Major Trauma Transfusion (PROMMTT) Study

PubMed Central

Rahbar, Elaheh; Fox, Erin E.; del Junco, Deborah J.; Harvin, John A.; Holcomb, John B.; Wade, Charles E.; Schreiber, Martin A.; Rahbar, Mohammad H.; Bulger, Eileen M.; Phelan, Herb A.; Brasel, Karen J.; Alarcon, Louis H.; Myers, John G.; Cohen, Mitchell J.; Muskat, Peter; Cotton, Bryan A.

2013-01-01

Background The classic definition of MT, ≥10 units red blood cells (RBCs) in 24 hours, has never been demonstrated as a valid surrogate for severe hemorrhage and can introduce survival bias. In addition, the definition fails to capture other products that the clinician may have immediately available during the initial resuscitation. Assuming that units of resuscitative fluids reflect patient illness, our objective was to identify a rate of resuscitation intensity (RI) that could serve as an early surrogate of sickness for patients with substantial bleeding post-injury. Methods Adult patients surviving at least 30 minutes post-admission and receiving ≥1 RBC within 6 hours of admission from ten US Level 1 trauma centers were enrolled in the PRospective Observational Multicenter Major Trauma Transfusion study. Total fluid units were calculated as the sum of the number of crystalloid units (1 L=1 unit), colloids (0.5 L=1 unit) and blood products (1 RBC=1 unit, 1 plasma=1 unit, 6 pack platelets=1 unit). Univariable and multivariable logistic regressions were used to evaluate associations between RI and 6-hour mortality, adjusting for age, center, penetrating injury, weighted Revised Trauma Score, and Injury Severity Score. Results 1096 eligible patients received resuscitative fluids within 30 minutes, including 620 transfused with blood products. Despite varying products utilized, the total fluid RI was similar across all sites (3.2±2.5 units). Patients who received ≥4 units of any resuscitative fluid had a 6-hour mortality rate of 14.4% vs. 4.5% in patients who received <4 units. The adjusted odds ratio of 6-hour mortality for patients receiving ≥4 units within 30 minutes was 2.1 (95% Confidence Interval: 1.2–3.5). Conclusions Resuscitation with ≥4 units of any fluid was significantly associated with 6-hour mortality. This study suggests that early RI regardless of fluid type can be used as a surrogate for sickness and mortality in severely bleeding patients. Level of Evidence PROMMTT is a prospective observational study, Level II. PMID:23778506

48 CFR 48.104-1 - Determining sharing period.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., based on planning and programming or production documentation at the time the VECP is accepted. The.... (c) For engineering-development contracts and contracts containing low-rate-initial-production or early production units, the end of the sharing period is based not on a calendar date, but on acceptance...

48 CFR 48.104-1 - Determining sharing period.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., based on planning and programming or production documentation at the time the VECP is accepted. The.... (c) For engineering-development contracts and contracts containing low-rate-initial-production or early production units, the end of the sharing period is based not on a calendar date, but on acceptance...

48 CFR 48.104-1 - Determining sharing period.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., based on planning and programming or production documentation at the time the VECP is accepted. The.... (c) For engineering-development contracts and contracts containing low-rate-initial-production or early production units, the end of the sharing period is based not on a calendar date, but on acceptance...

48 CFR 48.104-1 - Determining sharing period.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., based on planning and programming or production documentation at the time the VECP is accepted. The.... (c) For engineering-development contracts and contracts containing low-rate-initial-production or early production units, the end of the sharing period is based not on a calendar date, but on acceptance...

Effect of antiseptic handwashing vs alcohol sanitizer on health care-associated infections in neonatal intensive care units.

PubMed

Larson, Elaine L; Cimiotti, Jeannie; Haas, Janet; Parides, Michael; Nesin, Mirjana; Della-Latta, Phyllis; Saiman, Lisa

2005-04-01

The Centers for Disease Control and Prevention, Atlanta, Ga, recommend use of waterless alcohol hand products in lieu of traditional handwashing for patient care, but there are few data demonstrating the impact of this recommendation on health care-associated infections. To compare the effect of 2 hand hygiene regimens on infection rates and skin condition and microbial counts of nurses' hands in neonatal intensive care units. Clinical trial using a crossover design in 2 neonatal intensive care units in Manhattan, NY, from March 1, 2001, to January 31, 2003, including 2932 neonatal hospital admissions (51 760 patient days) and 119 nurse participants. Two hand hygiene products were tested: a traditional antiseptic handwash and an alcohol hand sanitizer. Each product was used for 11 consecutive months in each neonatal intensive care unit in random order. After adjusting for study site, birth weight, surgery, and follow-up time, there were no significant differences in neonatal infections between the 2 products; odds ratios for alcohol compared with handwashing were 0.98 (95% confidence interval [CI], 0.77-1.25) for any infection, 0.99 (95% CI, 0.77-1.33) for bloodstream infections, 1.61 (95% CI, 0.57-5.54) for pneumonia, 1.78 (95% CI, 0.94-3.37) for skin and soft tissue infections, and 1.26 (95% CI, 0.42-3.76) for central nervous system infections. The skin condition of participating nurses was significantly improved during the alcohol phase (P = .02 and P = .049 for observer and self-assessments, respectively), but there were no significant differences in mean microbial counts on nurses' hands (3.21 and 3.11 log(10) colony-forming units for handwashing and alcohol, respectively; P = .38). Infection rates and microbial counts on nurses' hands were equivalent during handwashing and alcohol phases, and nurses' skin condition was improved using alcohol. However, assessing the impact on infection rates of a single intervention is challenging because of multiple contributory factors such as patient risk, unit design, and staff behavior. Other practices such as frequency and quality of hand hygiene are likely to be as important as product in reducing risk of cross-transmission.

PHOTOCHEMICAL PRODUCTION OF REACTIVE OXYGEN SPECIES BY CONSTITUENTS OF COLORED DISSOLVED ORGANIC MATTER AND COASTAL RIVER WATERS IN THE SOUTHEASTERN UNITED STATES

EPA Science Inventory

Using a previously developed method to measure OH production, formation rates were obtained for several water systems. Employing an amino-nitroxide probe and DMSO, an action
spectrum for the product consistent with the production of OH by quinone moieties within humic material...

Production rates for United States Forest Service brush disposal planning in the northern Rocky Mountains

Treesearch

Dan Loeffler; Stu Hoyt; Nathaniel Anderson

2017-01-01

Timber harvesting operations generate brush and other vegetative debris, which often has no marketable value. In many western U.S. forests, these materials represent a fire hazard and a potential threat to forest health and must be removed or burned for disposal. Currently, there is no established, consistent method to estimate brush disposal production rates in the U....

Vastus Lateralis Motor Unit Firing Rate Is Higher in Women With Patellofemoral Pain.

PubMed

Gallina, Alessio; Hunt, Michael A; Hodges, Paul W; Garland, S Jayne

2018-05-01

To compare neural drive, determined from motor unit firing rate, in the vastus medialis and lateralis in women with and without patellofemoral pain. Cross-sectional study. University research laboratory. Women (N=56) 19 to 35 years of age, including 36 with patellofemoral pain and 20 controls. Not applicable. Participants sustained an isometric knee extension contraction at 10% of their maximal voluntary effort for 70 seconds. Motor units (N=414) were identified using high-density surface electromyography. Average firing rate was calculated between 5 and 35 seconds after recruitment for each motor unit. Initial firing rate was the inverse of the first 3 motor unit interspike intervals. In control participants, vastus medialis motor units discharged at higher rates than vastus lateralis motor units (P=.001). This was not observed in women with patellofemoral pain (P=.78) because of a higher discharge rate of vastus lateralis compared with control participants (P=.002). No between-group differences were observed for vastus medialis (P=.93). Similar results were obtained for the initial motor unit firing rate. These findings suggest that women with patellofemoral pain have a higher neural drive to vastus lateralis but not vastus medialis, which may be a contributor of the altered patellar kinematics observed in some studies. The different neural drive may be an adaptation to patellofemoral pain, possibly to compensate for decreased quadriceps force production, or a precursor of patellofemoral pain. Copyright © 2018 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

40 CFR 61.67 - Emission tests.

Code of Federal Regulations, 2011 CFR

2011-07-01

... = Conversion factor from ppmw to units of emission standard, 0.001 (metric units) = 0.002 (English units) PPVC...(a), or § 61.64(a)(1), (b), (c), or (d), or from any control system to which reactor emissions are... conversion factor, 1,000 g/kg (1 lb/lb). 10−6 = Conversion factor for ppm. Z = Production rate, kg/hr (lb/hr...

40 CFR 61.67 - Emission tests.

Code of Federal Regulations, 2012 CFR

2012-07-01

... = Conversion factor from ppmw to units of emission standard, 0.001 (metric units) = 0.002 (English units) PPVC...(a), or § 61.64(a)(1), (b), (c), or (d), or from any control system to which reactor emissions are... conversion factor, 1,000 g/kg (1 lb/lb). 10−6 = Conversion factor for ppm. Z = Production rate, kg/hr (lb/hr...

[Austrian expenditures on psychopharmaceutical drugs between 2006 and 2013].

PubMed

Boeckle, Markus; Chetouani, Yasmine; Schrimpf, Marlene; Liegl, Gregor; Leitner, Anton; Pieh, Christoph

2015-01-01

Health costs, which are increasing at a yearly rate of 4 %, represent 11% and thus a large share of Austria's gross domestic product (GDP). High expenditures derive frommental health care costs, including medication. In this article we investigate whether the costs and usage of psychopharmaceutic products in Austria are rising. We did a descriptive analysis of the sales figures and number for packaging units of pharmaceutical products of ATC-classes N05 and N06 in all Austrian hospitals, pharmacies and medicine chests for the years 2006-2013. All data were provided free of charge by IMSHealth. The sales volume and number of prescribed packaging units of pharmaceuticals of ATC-classes N05 and N06 increased over the time period in question. In 2013, about 25% more packaging units were being sold than in 2006. Among the two ATC-classes, however, the indication subgroups developed differently. Expenditures increased a total of about 31%within the period of consideration. The increase in psycho-pharmaceutical sales exceeds the expansion rates of other health expenditures (17.8 %). During the 9 years of observation, 25% more psychopharmaceutical products were sold. This may result from increased prevalence of mental disorders, higher usage or an increment in prescriptions.

Productive responses of breeding Cashmere goats and their kids to different stocking rates on improved upland pastures.

PubMed

Celaya, R; Moreno-Gonzalo, J; López López, C; Ferreira, L M M; García, U; Ferre, I; Osoro, K

2016-03-01

Although goat meat production could be an option for diversification in improved upland pastures in northern Spain, precise information on the optimal grazing management to enhance goat performance and maximize production per unit land area is lacking. The objective of this study was to compare the effects of 3 stocking rates, high stocking rate (HSR; 20 goats/ha), medium stocking rate (MSR; 15 goats/ha), and low stocking rate (LSR; 10 goats/ha), on gastrointestinal (GI) nematode infections and productive responses of Cashmere goats grazing such pastures. Treatments were replicated twice on 6 paddocks sown with and and with a high presence of the native grass . The experiment lasted 3 grazing seasons (from spring to autumn). Pastures were sampled for sward height and botanical and proximate composition. Body weight and BCS changes of goats were monitored and GI nematode infections were assessed by fecal egg counts (FEC). The established treatments resulted in lower mean sward height in the HSR than in the MSR and LSR (9.6, 11.5, and 14.4 cm, respectively; < 0.001). Pasture botanical composition and nutritive quality did not differ between treatments. The mean FEC of does across the 3 grazing seasons were greater ( < 0.05) in the HSR than in the LSR. spp., , and were the most prevalent nematode species identified in coprocultures. Does showed more favorable ( < 0.001) BW and BCS changes in the LSR than in the MSR and HSR (-14, -30, and -52 g/d and -0.1, -0.3, and -0.7 BCS units [scale 1 to 5], respectively). Greater ( < 0.001) kids' BW gains were observed in the LSR and MSR (average 94 g/d) compared with the HSR (70 g/d). Inversely, kid output per unit land area was greater in the HSR than in the MSR and LSR (320, 258, and 192 kg∙ha∙yr, respectively; < 0.001), whereas daily kids' BW gains per hectare were greater ( < 0.001) in the HSR and MSR (average 1.37 kg∙d∙ha) compared with the LSR (0.98 kg∙d∙ha). A medium stocking rate of 15 goats/ha could represent the best compromise between animal health, performance, and productivity per unit land area in this type of upland pastures, but stricter controls of parasite levels during the grazing season would be necessary to avoid production losses, unless alternative nutraceuticals are provided.

Effect of ageing on the force development in tetanic contractions of motor units in rat medial gastrocnemius muscle.

PubMed

Łochyński, Dawid; Kaczmarek, Dominik; Krutki, Piotr; Celichowski, Jan

2010-09-01

The purpose of this study was to determine the effect of ageing on the rate of force generation of motor units, and the mechanical efficiency of contraction produced by a doublet discharge. The study was carried out on isolated motor units of rat medial gastrocnemius muscle of young (5-10 mo) and two groups of old (24-25 and 28-30 mo) Wistar rats. Motor units were classified into the fast fatigable (FF), fast resistant (FR) and slow (S) ones. The force output and rate of force development were determined for non-doublet unfused tetanic contractions evoked by a series of a constant-rate trains of pulses and corresponding doublet contractions starting with an initial brief interpulse interval of 5 ms, and for maximal tetanic contraction. In FF motor units the rate of force development and the force produced by the doublet discharge increased transiently at the age of 24-25 mo, while in S and FR motor units this increase was observed at the age of 28-30 mo. Age-related decrease in the rate of force development of skeletal muscle cannot be attributed to a decline in efficiency of force production by functioning motor units. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Impacts of reproductive technologies on beef production in the United States.

PubMed

Dahlen, Carl; Larson, Jamie; Lamb, G Cliff

2014-01-01

Estimations of world population growth indicate that by the year 2050 we will reach nine billion habitants on earth. These estimates impose a tremendous challenge in the current agricultural systems as food supply will need to increase by 100 % in the next 40 years (Food and Agriculture Organization of the United Nations 2009). Beef will be a primary protein source that will assist in meeting the requirements for a portion of the protein in diets of this expanding global populace. Beef is a high-quality protein that contains all essential amino acids for the human body and also contains additional essential nutrients such as iron, zinc, B vitamins, riboflavin, selenium, choline, and conjugated linoleic acid (CLA). Adopting reproductive technologies at greater rates than currently used is a viable method to dramatically enhance production efficiency of beef cattle enterprises.Artificial insemination (AI), estrous synchronization and fixed-time AI (TAI), semen and embryo cryopreservation, multiple ovulation and embryo transfer (MOET), in vitro fertilization, sex determination of sperm or embryos, and nuclear transfer are technologies that are used to enhance the production efficiency of beef operations. In many cases, the development of these technologies is responsible for significant changes to traditional livestock production practices. However, adoption of these technologies appears to has not grown at the same rate in the United States as other formidable beef producing nations. For example, sales of beef semen for AI increased from 3.3 to 11.9 million units between 1993 and 2011 in Brazil, whereas that in the United States has increased from 2.9 to 3.8 million units during the same period. The significant increases in adoption of reproductive technologies in developing countries is likely as a result of the development of practical estrous synchronization and TAI systems that have allowed beef producers the opportunity to eliminate detection of estrus in their AI programs with a high degree of success. In the United States, slow adoption rates of these technologies may result in a future loss of international market share of beef products as other nations take advantage not only of the additional kilogram of beef that can be produced but also the improved quality of beef that can be realized through incorporation of reproductive technologies and resultant genetic improvement. However, current difficulties the US producers have with the incorporation of applied reproductive technologies, such as TAI, MOET, and sex semen, must not be the reason to overlook and incorporate more traditional reproductive technologies such as castration, breeding season management, or weaning. In many cases, beef producers in the United States fail to incorporate these more traditional technologies, which results in a reduction in production efficiency of the US beef industry. This chapter will focus on both traditional and more developed reproductive technologies that will play a role in enhancing future production efficiencies of the US beef cattle production system.

Ia Afferent input alters the recruitment thresholds and firing rates of single human motor units.

PubMed

Grande, G; Cafarelli, E

2003-06-01

Vibration of the patellar tendon recruits motor units in the knee extensors via excitation of muscle spindles and subsequent Ia afferent input to the alpha-motoneuron pool. Our first purpose was to determine if the recruitment threshold and firing rate of the same motor unit differed when recruited involuntarily via reflex or voluntarily via descending spinal pathways. Although Ia input is excitatory to the alpha-motoneuron pool, it has also been shown paradoxically to inhibit itself. Our second purpose was to determine if vibration of the patellar tendon during a voluntary knee extension causes a change in the firing rate of already recruited motor units. In the first protocol, 10 subjects voluntarily reproduced the same isometric force profile of the knee extensors that was elicited by vibration of the patellar tendon. Single motor unit recordings from the vastus lateralis (VL) were obtained with tungsten microelectrodes and unitary behaviour was examined during both reflex and voluntary knee extensions. Recordings from 135 single motor units showed that both recruitment thresholds and firing rates were lower during reflex contractions. In the second protocol, 7 subjects maintained a voluntary knee extension at 30 N for approximately 40-45 s. Three bursts of patellar tendon vibration were superimposed at regular intervals throughout the contraction and changes in the firing rate of already recruited motor units were examined. A total of 35 motor units were recorded and each burst of superimposed vibration caused a momentary reduction in the firing rates and recruitment of additional units. Our data provide evidence that Ia input modulates the recruitment thresholds and firing rates of motor units providing more flexibility within the neuromuscular system to grade force at low levels of force production.

Adult mouse motor units develop almost all of their force in the subprimary range: a new all-or-none strategy for force recruitment?

PubMed

Manuel, Marin; Heckman, C J

2011-10-19

Classical studies of the mammalian neuromuscular system have shown an impressive adaptation match between the intrinsic properties of motoneurons and the contractile properties of their motor units. In these studies, the rate at which motoneurons start to fire repetitively corresponds to the rate at which individual twitches start to sum, and the firing rate increases linearly with the amount of excitation ("primary range") up to the point where the motor unit develops its maximal force. This allows for the gradation of the force produced by a motor unit by rate modulation. In adult mouse motoneurons, however, we recently described a regime of firing ("subprimary range") that appears at lower excitation than what is required for the primary range, a finding that might challenge the classical conception. To investigate the force production of mouse motor units, we simultaneously recorded, for the first time, the motoneuron discharge elicited by intracellular ramps of current and the force developed by its motor unit. We showed that the motor unit developed nearly its maximal force during the subprimary range. This was found to be the case regardless of the input resistance of the motoneuron, the contraction speed, or the tetanic force of the motor unit. Our work suggests that force modulation in small mammals mainly relies on the number of motor units that are recruited rather than on rate modulation of individual motor units.

Female pheromones modulate flight muscle activation patterns during preflight warm-up.

PubMed

Crespo, José G; Vickers, Neil J; Goller, Franz

2013-08-01

At low ambient temperature Helicoverpa zea male moths engage in warm-up behavior prior to taking flight in response to an attractive female pheromone blend. Male H. zea warm up at a faster rate when sensing the attractive pheromone blend compared with unattractive blends or blank controls (Crespo et al. 2012), but the mechanisms involved in this olfactory modulation of the heating rate during preflight warm-up are unknown. Here, we test three possible mechanisms for increasing heat production: 1) increased rate of muscle contraction; 2) reduction in mechanical movement by increased overlap in activation of the antagonistic flight muscles; and 3) increased activation of motor units. To test which mechanisms play a role, we simultaneously recorded electrical activation patterns of the main flight muscles (dorsolongitudinal and dorsoventral muscles), wing movement, and thoracic temperature in moths exposed to both the attractive pheromone blend and a blank control. Results indicate that the main mechanism responsible for the observed increase in thoracic heating rate with pheromone stimulation is the differential activation of motor units during each muscle contraction cycle in both antagonistic flight muscles. This additional activation lengthens the contracted state within each cycle and thus accounts for the greater heat production. Interestingly, the rate of activation (frequency of contraction cycles) of motor units, which is temperature dependent, did not vary between treatments. This result suggests that the activation rate is determined by a temperature-dependent oscillator, which is not affected by the olfactory stimulus, but activation of motor units is modulated during each cycle.

Female pheromones modulate flight muscle activation patterns during preflight warm-up

PubMed Central

Vickers, Neil J.; Goller, Franz

2013-01-01

At low ambient temperature Helicoverpa zea male moths engage in warm-up behavior prior to taking flight in response to an attractive female pheromone blend. Male H. zea warm up at a faster rate when sensing the attractive pheromone blend compared with unattractive blends or blank controls (Crespo et al. 2012), but the mechanisms involved in this olfactory modulation of the heating rate during preflight warm-up are unknown. Here, we test three possible mechanisms for increasing heat production: 1) increased rate of muscle contraction; 2) reduction in mechanical movement by increased overlap in activation of the antagonistic flight muscles; and 3) increased activation of motor units. To test which mechanisms play a role, we simultaneously recorded electrical activation patterns of the main flight muscles (dorsolongitudinal and dorsoventral muscles), wing movement, and thoracic temperature in moths exposed to both the attractive pheromone blend and a blank control. Results indicate that the main mechanism responsible for the observed increase in thoracic heating rate with pheromone stimulation is the differential activation of motor units during each muscle contraction cycle in both antagonistic flight muscles. This additional activation lengthens the contracted state within each cycle and thus accounts for the greater heat production. Interestingly, the rate of activation (frequency of contraction cycles) of motor units, which is temperature dependent, did not vary between treatments. This result suggests that the activation rate is determined by a temperature-dependent oscillator, which is not affected by the olfactory stimulus, but activation of motor units is modulated during each cycle. PMID:23699056

Secondary oil recovery from selected Carter sandstone oilfields -- Black Warrior Basin, Alabama. Quarterly technical progress report, September 1--November 30, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, J.C.

1994-01-15

Anderman/Smith Operating Co. is operating a secondary oil recovery project involving the Carter sandstone in northwest Alabama. The project objectives are: (1) to increase the ultimate economic recovery of oil from the Carter reservoirs, thereby increasing domestic reserves and lessening US dependence on foreign oil; (2) to extensively model, test, and monitor the reservoirs so their management is optimized; and (3) to assimilate and transfer the information and results gathered to other US oil companies to encourage them to attempt similar projects. As a result of waterflood operations at the Central Buff unit, oil production from the Fowler Brasher 7--9more » well increased to 40--50 stb/d in late October, and averaged about 45 stb/d in November with no measurable water production. Production at the Fowler Dodson 8--12 was more erratic during the same period. In October, the oil rate for this well increased to nearly 17 stb/d with no reported water production. However, in November the oil production rate declined to about 9 stb/d with an associated average water rate of nearly 17 bpd. Water analysis showed that this produced water was significantly fresher than the connate water produced prior to waterflood operations. This provides evidence for early breakthrough of water injected at the Jones 7--16 well and will be an important consideration in the reservoir modeling study being performed for the unit. There has been essentially no change in the waterflood response at the North Fairview Unit during the last quarter. Oil production rates from the three producing wells have remained unchanged; that is, 3 stb/d for Smith 33-6, 2 stb/d for Perkins 33--11, and 1 stb/d for the Perkins Young 33--10 well.« less

Vastus lateralis single motor unit EMG at the same absolute torque production at different knee angles.

PubMed

Altenburg, T M; de Haan, A; Verdijk, P W L; van Mechelen, W; de Ruiter, C J

2009-07-01

Single motor unit electromyographic (EMG) activity of the knee extensors was investigated at different knee angles with subjects (n = 10) exerting the same absolute submaximal isometric torque at each angle. Measurements were made over a 20 degrees range around the optimum angle for torque production (AngleTmax) and, where feasible, over a wider range (50 degrees ). Forty-six vastus lateralis (VL) motor units were recorded at 20.7 +/- 17.9 %maximum voluntary contraction (%MVC) together with the rectified surface EMG (rsEMG) of the superficial VL muscle. Due to the lower maximal torque capacity at positions more flexed and extended than AngleTmax, single motor unit recruitment thresholds were expected to decrease and discharge rates were expected to increase at angles above and below AngleTmax. Unexpectedly, the recruitment threshold was higher (P < 0.05) at knee angles 10 degrees more extended (43.7 +/- 22.2 N.m) and not different (P > 0.05) at knee angles 10 degrees more flexed (35.2 +/- 17.9 N.m) compared with recruitment threshold at AngleTmax (41.8 +/- 21.4 N.m). Also, unexpectedly the discharge rates were similar (P > 0.05) at the three angles: 11.6 +/- 2.2, 11.6 +/- 2.1, and 12.3 +/- 2.1 Hz. Similar angle independent discharge rates were also found for 12 units (n = 5; 7.4 +/- 5.4 %MVC) studied over the wider (50 degrees ) range, while recruitment threshold only decreased at more flexed angles. In conclusion, the similar recruitment threshold and discharge behavior of VL motor units during submaximal isometric torque production suggests that net motor unit activation did not change very much along the ascending limb of the knee-angle torque relationship. Several factors such as length-dependent twitch potentiation, which may contribute to this unexpected aspect of motor control, are discussed.

Psychostimulant Use for Children with ADHD in Australia.

ERIC Educational Resources Information Center

Reid, Robert; Prosser, Brenton

1999-01-01

This study presents data from Australia on psychostimulant production and prescription rates for children with attention-deficit disorders and analyzes data from one city. Results indicate that medication use is increasing at a rate similar to that in the United States and that prescription rates may vary by income and unemployment. (Author/CR)

The principal rare earth elements deposits of the United States: A summary of domestic deposits and a global perspective

USGS Publications Warehouse

Long, Keith R.; Van Gosen, Bradley S.; Foley, Nora K.; Cordier, Daniel

2012-01-01

Demand for the rare earth elements (REE, lanthanide elements) is estimated to be increasing at a rate of about 8% per year due to increasing applications in consumer products, computers, automobiles, aircraft, and other advanced technology products. Much of this demand growth is driven by new technologies that increase energy efficiency and substitute away from fossil fuels. Production of these elements is highly concentrated in China, which is reducing its exports of REE raw materials as part of its industrial policy. The ability of the rest of the world to replace supply from China depends on the quality of known REE resources and the degree to which those resources have been explored and evaluated. A review of United States resources in a global context finds that the United States could make significant contributions to future REE production. Aside from two advanced projects in the United States and Australia, however, there are no REE projects advanced enough to meet short-term demand.

7 CFR 1540.20 - Applicability of subpart.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Imported From Israel § 1540.20 Applicability of subpart. This subpart applies to requests filed with the... emergency relief from imports of certain perishable products from Israel entering the United States at a reduced rate of duty or duty-free pursuant to a trade agreement between the United States and Israel...

7 CFR 1540.20 - Applicability of subpart.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Imported From Israel § 1540.20 Applicability of subpart. This subpart applies to requests filed with the... emergency relief from imports of certain perishable products from Israel entering the United States at a reduced rate of duty or duty-free pursuant to a trade agreement between the United States and Israel...

7 CFR 1540.20 - Applicability of subpart.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Imported From Israel § 1540.20 Applicability of subpart. This subpart applies to requests filed with the... emergency relief from imports of certain perishable products from Israel entering the United States at a reduced rate of duty or duty-free pursuant to a trade agreement between the United States and Israel...

7 CFR 1540.20 - Applicability of subpart.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Imported From Israel § 1540.20 Applicability of subpart. This subpart applies to requests filed with the... emergency relief from imports of certain perishable products from Israel entering the United States at a reduced rate of duty or duty-free pursuant to a trade agreement between the United States and Israel...

7 CFR 1540.20 - Applicability of subpart.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Imported From Israel § 1540.20 Applicability of subpart. This subpart applies to requests filed with the... emergency relief from imports of certain perishable products from Israel entering the United States at a reduced rate of duty or duty-free pursuant to a trade agreement between the United States and Israel...

The Struggle To Survive: Work for Racial Ethnic Women in the 18th- and 19th-Century United States.

ERIC Educational Resources Information Center

Higginbotham, Elizabeth

The work situations of Black, Mexican American, and Chinese immigrant women in 18th- and 19th-century United States are explored. Generally, when engaged in agricultural work, all ethnic people were considered units of labor. However, because the slave owner needed to perpetuate his property, Black women were allowed lower rates of production when…

OCCURRENCE OF A NEW GENERATION OF DISINFECTION BY-PRODUCTS

EPA Science Inventory

A survey of disinfection by-product (DBP) occurrence in the United States was conducted at 12 drinking water treatment plants. In addition to currently regulated DBPs, more than 50 DBPs that rated a high priority for potential toxicity were studied. These priority DBPs included...

Ambient Cured Alkali Activated Flyash Masonry Units

NASA Astrophysics Data System (ADS)

Venugopal, K.; Radhakrishna; Sasalatti, Vinod M.

2016-09-01

Geopolymers belong to a category of non-conventional and non-Portland cement based cementitious binders which are produced using industrial by products like fly ash and ground granulated blast furnace slag (GGBFS). This paper reports on the development of geopolymer mortars for production of masonry units. The geopolymer mortars were prepared by mixing various by products with manufactured sand and a liquid mixture of sodium silicate and sodium hydroxide solutions. After curing at ambient conditions, the masonry units were tested for strength properties such as water absorption, initial rate of absorption, compression, shear- bond, and stress-strain behaviour etc. It was observed that the flexural strength of the blocks is more than 2 MPa and shear bond strength is more than 0.4MPa. It was found that the properties of geopolymer blocks were superior to the traditional masonry units. Hence they can be recommended for structural masonry.

A population-based study of the association of medical manpower with county trauma death rates in the United States.

PubMed Central

Rutledge, R; Fakhry, S M; Baker, C C; Weaver, N; Ramenofsky, M; Sheldon, G F; Meyer, A A

1994-01-01

OBJECTIVE: To determine the association between measures of medical manpower available to treat trauma patients and county trauma death rates in the United States. The primary hypothesis was that greater availability of medical manpower to treat trauma injury would be associated with lower trauma death rates. SUMMARY BACKGROUND DATA: When viewed from the standpoint of the number of productive years of life lost, trauma has a greater effect on health care and lost productivity in the United States than any disease. Allocation of health care manpower to treat injuries seems logical, but studies have not been done to determine its efficacy. The effect of medical manpower and hospital resource allocation on the outcome of injury in the United States has not been fully explored or adequately evaluated. METHODS: Data on trauma deaths in the United States were obtained from the National Center for Health Statistics. Data on the number of surgeons and emergency medicine physicians were obtained from the American Hospital Association and the American Medical Association. Data on physicians who have participated in the American College of Surgeons (ACS) Advanced Trauma Life Support Course (ATLS) were obtained from the ACS. Membership information for the American Association for Surgery of Trauma (AAST) was obtained from that organization. Demographic data were obtained from the United States Census Bureau. Multivariate stepwise linear regression and cluster analysis were used to model the county trauma death rates in the United States. The Statistical Analysis System (Cary, NC) for statistical analysis was used. RESULTS: Bivariate and multivariate analyses showed that a variety of medical manpower measures and demographic factors were associated with county trauma death rates in the United States. As in other studies, measures of low population density and high levels of poverty were found to be strongly associated with increased trauma death rates. After accounting for these variables, using multivariate analysis and cluster analysis, an increase in the following medical manpower measures were associated with decreased county trauma death rates: number of board-certified general surgeons, number of board-certified emergency medicine physicians, number of AAST members, and number of ATLS-trained physicians. CONCLUSIONS: This study confirms previous work that showed a strong relation among measures of poverty, rural setting, and increased county trauma death rates. It also found that counties with more board-certified surgeons per capita and with more surgeons with an increased interest (AAST membership) or increased training (ATLS) in trauma care have lower per-capita trauma death rates.(ABSTRACT TRUNCATED AT 400 WORDS) Images Figure 1. PMID:8185404

30 CFR 260.102 - What definitions apply to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... amount or value of the production saved, removed, or sold. Lease period means the time from lease... rate payable to the United States, as specified in the lease, in the amount or value of the production... title.) Production period means the period during which the amount of oil and gas produced from a tract...

Preliminary design and economic investigations of Diffuser Augmented Wind Turbines (DAWT)

NASA Astrophysics Data System (ADS)

Foreman, K. M.

1981-12-01

A preferred design and configuration approach for the diffuser augmented wind turbines (DAWT) innovative wind energy conversion system is proposed. A preliminary economic assessment for limited production rates of units between 5 and 150 kw rated output was made. It is estimated that for farm and REA cooperative end users, the COE can range between 2 and 3.5 cents/kWh for sites with annual average wind speeds of 16 and 12 mph respectively and 150 kW rated units. No tax credits are included in these COE figures. For commercial end users of these 150 kW units the COE ranges between 4.0 and 6.5 cents/kWh for 16 and 12 mph sites. These estimates in 1979 dollars are lower than DOE goals set in 1978 for the rating size and end applications.

Impact of Brexit on the forest products industry of the United Kingdom and the rest of the world

Treesearch

Craig M. T. Johnston; Joseph Buongiorno

2016-01-01

The Global Forest Products Model was applied to forecast the effect of Brexit on the global forest products industry to2003 under two scenarios; an optimistic and pessimistic future storyline regarding the potential economic effect of Brexit. The forecasts integrated a range of gross domestic product growth rates using an average of the optimistic and...

Hospital costs and specialization: benefits of limiting the number of product lines.

PubMed

Eastaugh, Steven R

2009-01-01

Trends in hospital specialization are studied using multiple regression analysis for the period 1999-2008. The observed 31.3 percent rise in specialization was associated with a 9.5 percent decline in unit cost per admission. The number of specialized hospitals has grown by 149 percent in the past decade. Other hospitals are getting more specialized by reducing their product lines. Specialization has been highest in competitive West Coast markets and lowest in the rate-regulated states (New York and Massachusetts). Hospitals have less incentive to contain costs by decreasing the array of services offered in stringent rate-setting states. The term "underspecialization" is advanced to capture the inability of some hospitals to selectively prune out product lines in order to specialize. Such hospitals spread resources so thin that many good departments suffer. Unit cost per case (DRG-adjusted) is higher in the less specialized hospitals.

49 CFR 585.113 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... passenger cars, multipurpose passenger vehicles, trucks, and buses with a gross vehicle weight rating of 2... production consists exclusively of vehicles manufactured in two or more stages, and vehicles that are altered... subpart does not apply to manufacturers whose production of motor vehicles for the United States market is...

75 FR 53013 - Fiscal Year 2011 Tariff-rate Quota Allocations for Raw Cane Sugar, Refined and Specialty Sugar...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... for Raw Cane Sugar, Refined and Specialty Sugar, and Sugar-containing Products; Revision AGENCY... August 17, 2010 concerning Fiscal Year 2011 tariff-rate quota allocations of raw cane sugar, refined and... announced that sugar entering the United States under the Fiscal Year 2011 raw sugar tariff-rate quota will...

Development and on-site field testing of the power-tube airlift aerator and chances for commercialization

USDA-ARS?s Scientific Manuscript database

Aeration of ponds when dissolved oxygen (DO) concentrations are low is the principal management tool that allows for higher feeding rates, increased production, and decreased cost per unit fish produced. Recent research conducted at the USDA-ARS Warmwater Aquaculture Research Unit has shown that fee...

Defense Acquisition Reform, 19602009: An Elusive Goal

DTIC Science & Technology

2011-10-31

the seven largest economies of the world (United States, China, Japan, Germany , France, United Kingdom, and Italy).11 Major weapon systems...and to a lesser extent, Germany ) compared with that of the United States was an im- portant reason for Japan’s higher rate of productivity growth...professions and areas of expertise. DoD vetted prospects from non-defense businesses such as insurance and cruise lines, from organized labor, and

Mineral production and mining trends for selected non-fuel commodities in Idaho and Montana, 1905-2001

USGS Publications Warehouse

Larsen, Jeremy C.; Long, Keith R.; Assmus, Kenneth C.; Zientek, Michael L.

2004-01-01

Idaho and Montana state mining statistics were obtained from historical mineral production records and compiled into a continuous record from 1905 through 2001. To facilitate comparisons, the mineral production data were normalized by converting the units of measure to metric tons for all included commodities. These standardized statistical data include production rates for principal non-fuel mineral commodities from both Idaho and Montana, as well as the production rates of similar commodities for the U.S. and the world for contrast. Data are presented here in both tabular and bar chart format. Moreover, the tables of standardized mineral production data are also provided in digital format as, commodity_production.xls. Some significant historical events pertaining to the mining industry are described as well. When taken into account with the historical production data, this combined information may to help explain both specific fluctuations and general tendencies in the overall trends in the rates of mineral resource production over time.

Prospective change control analysis of transfer of platelet concentrate production from a specialized stem cell transplantation unit to a blood transfusion center.

PubMed

Sigle, Joerg-Peter; Medinger, Michael; Stern, Martin; Infanti, Laura; Heim, Dominik; Halter, Joerg; Gratwohl, Alois; Buser, Andreas

2012-01-01

Specialized centers claim a need for blood component production independent from the general blood transfusion services. We performed a prospective change control analysis of the transfer of platelet (PLT) production for hematological patients at the University Hospital Basel from the Department of Hematology to the Blood Transfusion Centre, Swiss Red Cross, Basel in February 2006. We wanted to demonstrate that neither quality nor transfusion outcome was affected. Production quantity and efficiency, product quality and transfusion outcome were systematically recorded. A 2-year pretransfer period was compared to a 2 year post-transfer period. After transfer production quantity at the Blood Transfusion Centre increased from 4,483 to 6,190 PLT concentrates. Production efficiency increased with a significant decrease in the rate of expired products (18% vs. 8%; P < 0.001). Product quality showed a slight decrease in median PLT count per unit (2.84 vs. 2.75 × 10(11); P < 0.001) and a slight increase in mean storage time prior to transfusion (3.18 vs. 3.30 days; P < 0.001). Transfusion outcome measured as median corrected count increment one hour post-transfusion (10.5 vs. 10.7; P = 0.3) and the rate of patients with inadequate post-transfusion increment (31.5% vs. 32.1%; P = 0.6) did not differ. Supply and quality of PLT products was maintained after the transfer of PLT production to the Blood Transfusion Centre. An optimization of the supply chain process with markedly decreased expiration rates was achieved. These results argue against the need of specialized PLT production sites for selected patient groups. Copyright © 2012 Wiley Periodicals, Inc.

Sweating is greater in NCAA football linemen independently of heat production.

PubMed

Deren, Tomasz M; Coris, Eric E; Bain, Anthony R; Walz, Steve M; Jay, Ollie

2012-02-01

The study's purpose was to investigate whether differences in local sweat rates on the upper body between American football linemen (L) and backs (B) exist independently of differences in metabolic heat production. Twelve NCAA Division I American football players (6 linemen (mass = 141.6 ± 6.5 kg, body surface area (BSA) = 2.67 ± 0.08 m2) and 6 backs (mass = 88.1 ± 13.4 kg, BSA = 2.11 ± 0.19 m2)) cycled at a fixed metabolic heat production per unit BSA of 350 W·m(-2) for 60 min in a climatic chamber (t(db) [dry bulb temperature] = 32.4°C ± 1.0°C, t(wb) [wet bulb temperature] = 26.3°C ± 0.6°C, v [air velocity] = 0.9 ± 0.1 m·s(-1)). Local sweat rates on the head, arm, shoulder, lower back, and chest were measured after 10, 30, and 50 min of exercise. Core temperature, mean skin temperature, and HR were measured throughout exercise. Because metabolic heat production per unit surface area was fixed between participants, the rate of evaporation required for heat balance was similar (L = 261 ± 35 W·m(-2), B = 294 ± 30 W·m(-2), P = 0.11). However, local sweat rates on the head, arm, shoulder, and chest were all significantly greater (P < 0.05) in linemen at all time points, and end-exercise core temperature was significantly greater (P = 0.033) in linemen (38.5°C ± 0.4°C) relative to backs (38.0°C ± 0.2°C) despite a ∼25% lower heat production per unit mass. The change in mean skin temperature from rest was greater in linemen (P < 0.001) after 15, 30, 45, and 60 min, and HR was greater in linemen for the last 30 min of exercise. Football linemen sweat significantly more on the torso and head than football backs independently of any differences in metabolic heat production per unit BSA and therefore the evaporative requirements for heat balance. Despite greater sweating, linemen demonstrated significantly greater elevations in core temperature suggesting that sweating efficiency (i.e., the proportion of sweat that evaporates) was much lower in linemen.

Neural control of muscle force: indications from a simulation model

PubMed Central

Luca, Carlo J. De

2013-01-01

We developed a model to investigate the influence of the muscle force twitch on the simulated firing behavior of motoneurons and muscle force production during voluntary isometric contractions. The input consists of an excitatory signal common to all the motor units in the pool of a muscle, consistent with the “common drive” property. Motor units respond with a hierarchically structured firing behavior wherein at any time and force, firing rates are inversely proportional to recruitment threshold, as described by the “onion skin” property. Time- and force-dependent changes in muscle force production are introduced by varying the motor unit force twitches as a function of time or by varying the number of active motor units. A force feedback adjusts the input excitation, maintaining the simulated force at a target level. The simulations replicate motor unit behavior characteristics similar to those reported in previous empirical studies of sustained contractions: 1) the initial decrease and subsequent increase of firing rates, 2) the derecruitment and recruitment of motor units throughout sustained contractions, and 3) the continual increase in the force fluctuation caused by the progressive recruitment of larger motor units. The model cautions the use of motor unit behavior at recruitment and derecruitment without consideration of changes in the muscle force generation capacity. It describes an alternative mechanism for the reserve capacity of motor units to generate extraordinary force. It supports the hypothesis that the control of motoneurons remains invariant during force-varying and sustained isometric contractions. PMID:23236008

A System for Distributing Real-Time Customized (NEXRAD-Radar) Geosciences Data

NASA Astrophysics Data System (ADS)

Singh, Satpreet; McWhirter, Jeff; Krajewski, Witold; Kruger, Anton; Goska, Radoslaw; Seo, Bongchul; Domaszczynski, Piotr; Weber, Jeff

2010-05-01

Hydrometeorologists and hydrologists can benefit from (weather) radar derived rain products, including rain rates and accumulations. The Hydro-NEXRAD system (HNX1) has been in operation since 2006 at IIHR-Hydroscience and Engineering at The University of Iowa. It provides rapid and user-friendly access to such user-customized products, generated using archived Weather Surveillance Doppler Radar (WSR-88D) data from the NEXRAD weather radar network in the United States. HNX1 allows researchers to deal directly with radar-derived rain products, without the burden of the details of radar data collection, quality control, processing, and format conversion. A number of hydrologic applications can benefit from a continuous real-time feed of customized radar-derived rain products. We are currently developing such a system, Hydro-NEXRAD 2 (HNX2). HNX2 collects real-time, unprocessed data from multiple NEXRAD radars as they become available, processes them through a user-configurable pipeline of data-processing modules, and then publishes processed products at regular intervals. Modules in the data processing pipeline encapsulate algorithms such as non-meteorological echo detection, range correction, radar-reflectivity-rain rate (Z-R) conversion, advection correction, merging products from multiple radars, and grid transformations. HNX2's implementation presents significant challenges, including quality-control, error-handling, time-synchronization of data from multiple asynchronous sources, generation of multiple-radar metadata products, distribution of products to a user base with diverse needs and constraints, and scalability. For content management and distribution, HNX2 uses RAMADDA (Repository for Archiving, Managing and Accessing Diverse Data), developed by the UCAR/Unidata Program Center in the Unites States. RAMADDA allows HNX2 to publish products through automation and gives users multiple access methods to the published products, including simple web-browser based access, and OpenDAP access. The latter allows a user to set up automation at his/her end, and fetch new data from HNX2 at regular intervals. HNX2 uses a two-dimensional metadata structure called a mosaic for managing metadata of the rain products. Currently, HNX2 is in pre-production state and is serving near real-time rain-rate map data-products for individual radars and merged data-products from seven radars covering the state of Iowa in the United States. These products then drive a rainfall-runoff model called CUENCAS, which is used as part of the Iowa Flood Center (housed at The University of Iowa) real-time flood forecasting system. We are currently developing a generalized scalable framework that will run on inexpensive hardware and will provide products for basins anywhere in the continental United States.

Plantation thinning systems in the Southern United States

Treesearch

Bryce J. Stokes; William F. Watson

1996-01-01

This paper reviews southern pine management and thinning practices, describes three harvesting systems for thinning, and presents production and cost estimates, and utilization rates. The costs and product recoveries were developed from published sources using a spreadsheet analysis. Systems included tree-length, flail/chip, and cut-to-length. The estimated total...

Assessment of faculty productivity in academic departments of medicine in the United States: a national survey.

PubMed

Kairouz, Victor F; Raad, Dany; Fudyma, John; Curtis, Anne B; Schünemann, Holger J; Akl, Elie A

2014-09-26

Faculty productivity is essential for academic medical centers striving to achieve excellence and national recognition. The objective of this study was to evaluate whether and how academic Departments of Medicine in the United States measure faculty productivity for the purpose of salary compensation. We surveyed the Chairs of academic Departments of Medicine in the United States in 2012. We sent a paper-based questionnaire along with a personalized invitation letter by postal mail. For non-responders, we sent reminder letters, then called them and faxed them the questionnaire. The questionnaire included 8 questions with 23 tabulated close-ended items about the types of productivity measured (clinical, research, teaching, administrative) and the measurement strategies used. We conducted descriptive analyses. Chairs of 78 of 152 eligible departments responded to the survey (51% response rate). Overall, 82% of respondents reported measuring at least one type of faculty productivity for the purpose of salary compensation. Amongst those measuring faculty productivity, types measured were: clinical (98%), research (61%), teaching (62%), and administrative (64%). Percentages of respondents who reported the use of standardized measurements units (e.g., Relative Value Units (RVUs)) varied from 17% for administrative productivity to 95% for research productivity. Departments reported a wide variation of what exact activities are measured and how they are monetarily compensated. Most compensation plans take into account academic rank (77%). The majority of compensation plans are in the form of a bonus on top of a fixed salary (66%) and/or an adjustment of salary based on previous period productivity (55%). Our survey suggests that most academic Departments of Medicine in the United States measure faculty productivity and convert it into standardized units for the purpose of salary compensation. The exact activities that are measured and how they are monetarily compensated varied substantially across departments.

[Scientific publication output of Spanish emergency physicians from 2005 to 2014: a comparative study].

PubMed

Fernández-Guerrero, Inés María; Martín-Sánchez, Francisco Javier; Burillo-Putze, Guillermo; Miró, Òscar

2017-10-01

To analyze the research output of Spanish emergency physicians between 2005 and 2014 and to compare it to their output in the previous 10-year period (1995-2004) as well as to that of emergency physicians in other countries and Spanish physicians in other specialties. Original articles indexed in the Science Citation Index Expanded of the Web of Science were included. Documents from Spanish emergency physicians were identified by combining the word Spain and any other search term identifying an emergency service or unit in Spain. To identify articles from 7 other Spanish specialties (hematology, endocrinology, cardiology, pneumology, digestive medicine, pediatrics, surgery and orthopedic medicine or traumatology) and emergency physicians in 8 other countries (United States, United Kingdom, Ireland, Italy, France, Germany, Netherlands, Belgium) we used similar strategies. Information about production between 1995 and 2004 was extracted from a prior publication. Spanish emergency physicians signed 1254 articles (mean [SD], 125 [44] articles/y) between 2005 and 2014. That level of productivity was greater than in the 1995-2004 period (mean, 26 [14] articles/y), although the annual growth rate fell from 12.5% in the previous 10-year period to 5.2% in the most recent one. Emergency medicine was among the least productive Spanish specialties we studied, but our discipline's annual growth rate of 5.2% was the highest. Spanish emergency medicine occupies an intermediate position (ranking fifth) among the 9 countries studied, although the population-adjusted rank was higher (fourth). When output was adjusted for gross domestic product, Spain climbed higher in rank, to second position. The annual growth rate was the fourth highest among countries, after Germany (9.9%), the Netherlands (7.3%), and Italy (6.0%). The research output of Spanish emergency physicians continues to be quantitatively lower than that of other Spanish specialties and of emergency physicians in other countries. The annual rate of growth in publications, although good, fell below the growth rate of the previous period.

Occupational fatality risks in the United States and the United Kingdom.

PubMed

Mendeloff, John; Staetsky, Laura

2014-01-01

There are very few careful studies of differences in occupational fatality rates across countries, much less studies that try to account for those differences. We compare the rate of work injury fatalities (excluding deaths due to highway motor vehicle crashes and those due to violence) identified by the US Census of Fatal Occupational Injuries in recent years with the number reported to the Health and Safety Executive in the United Kingdom (UK) and by other European Union (EU) members through Eurostat. In 2010, the fatality rate in the UK was about 1/3 the rate in the US. In construction the rate was about ¼ the US rate, a difference that had grown substantially since the 1990s. Several other EU members had rates almost as low as the UK rate. Across EU countries, lower rates were associated with high-level management attention to safety issues and to in-house preparation of "risk assessments." Although work fatality rates have declined in the US, fatality rates are much lower and have declined faster in recent years in the UK. Efforts to find out the reasons for the much better UK outcomes could be productive. © 2013 Wiley Periodicals, Inc.

Toward a theory of energetically optimal body size in growing animals.

PubMed

Hannon, B M; Murphy, M R

2016-06-01

Our objective was to formulate a general and useful model of the energy economy of the growing animal. We developed a theory that the respiratory energy per unit of size reaches a minimum at a particular point, when the marginal respiratory heat production rate is equal to the average rate. This occurs at what we defined as the energetically optimal size for the animal. The relationship between heat production rate and size was found to be well described by a cubic function in which heat production rate accelerates as the animal approaches and then exceeds its optimal size. Reanalysis of energetics data from the literature often detected cubic curvature in the relationship between heat production rate and body size of fish, rats, chickens, goats, sheep, swine, cattle, and horses. This finding was consistent with the theory for 13 of 17 data sets. The bias-corrected Akaike information criterion indicated that the cubic equation modeled the influence of the size of a growing animal on its heat production rate better than a power function for 11 of 17 data sets. Changes in the sizes and specific heat production rates of metabolically active internal organs, and body composition and tissue turnover rates were found to explain notable portions of the expected increase in heat production rate as animals approached and then exceeded their energetically optimum size. Accelerating maintenance costs in this region decrease net energy available for productive functions. Energetically and economically optimum size criteria were also compared.

A Decentralized Scheduling Policy for a Dynamically Reconfigurable Production System

NASA Astrophysics Data System (ADS)

Giordani, Stefano; Lujak, Marin; Martinelli, Francesco

In this paper, the static layout of a traditional multi-machine factory producing a set of distinct goods is integrated with a set of mobile production units - robots. The robots dynamically change their work position to increment the product rate of the different typologies of products in respect to the fluctuations of the demands and production costs during a given time horizon. Assuming that the planning time horizon is subdivided into a finite number of time periods, this particularly flexible layout requires the definition and the solution of a complex scheduling problem, involving for each period of the planning time horizon, the determination of the position of the robots, i.e., the assignment to the respective tasks in order to minimize production costs given the product demand rates during the planning time horizon.

76 FR 50285 - Fiscal Year 2012 Tariff-Rate Quota Allocations for Raw Cane Sugar, Refined and Specialty Sugar...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

... for Raw Cane Sugar, Refined and Specialty Sugar and Sugar-Containing Products AGENCY: Office of the... quantity of the tariff-rate quotas for imported raw cane sugar, refined and specialty sugar and sugar...), the United States maintains tariff-rate quotas (TRQs) for imports of raw cane sugar and refined sugar...

Incidence and lifetime costs of injuries in the United States

PubMed Central

Corso, P; Finkelstein, E; Miller, T; Fiebelkorn, I; Zaloshnja, E

2006-01-01

Background Standardized methodologies for assessing economic burden of injury at the national or international level do not exist. Objective To measure national incidence, medical costs, and productivity losses of medically treated injuries using the most recent data available in the United States, as a case study for similarly developed countries undertaking economic burden analyses. Method The authors combined several data sets to estimate the incidence of fatal and non‐fatal injuries in 2000. They computed unit medical and productivity costs and multiplied these costs by corresponding incidence estimates to yield total lifetime costs of injuries occurring in 2000. Main outcome measures Incidence, medical costs, productivity losses, and total costs for injuries stratified by age group, sex, and mechanism. Results More than 50 million Americans experienced a medically treated injury in 2000, resulting in lifetime costs of $406 billion; $80 billion for medical treatment and $326 billion for lost productivity. Males had a 20% higher rate of injury than females. Injuries resulting from falls or being struck by/against an object accounted for more than 44% of injuries. The rate of medically treated injuries declined by 15% from 1985 to 2000 in the US. For those aged 0–44, the incidence rate of injuries declined by more than 20%; while persons aged 75 and older experienced a 20% increase. Conclusions These national burden estimates provide unequivocal evidence of the large health and financial burden of injuries. This study can serve as a template for other countries or be used in intercountry comparisons. PMID:16887941

The Reindustrialization of the United States: Implications for Vocational Education Research and Development. Occasional Paper No. 71.

ERIC Educational Resources Information Center

Striner, Herbert E.

Reindustrialization problems in the United States (U.S.) include unemployment, low productivity, inflation, and inadequate economic growth. To determine how to improve economic performance, a careful, rational evaluation must be made of such factors as tax policy, spirit of risk, managerial effectiveness, rates of innovation, research and…

MIGRATORY FARMWORKERS IN THE MIDCONTINENT STREAMS, PRODUCTION RESEARCH REPORT NUMBER 41.

ERIC Educational Resources Information Center

METZLER, WILLIAM H.; SARGENT, FREDERIC O.

THE SPANISH-AMERICANS OF SOUTHERN TEXAS PROVIDE ONE OF THE LARGEST RESERVOIRS OF SEASONAL FARM LABOR WHOSE RATE OF MOVEMENT IS AFFECTED BY ECONOMIC CONDITIONS OF THE UNITED STATES AND MEXICO. RECRUITMENT OF WORKERS HAS BECOME HIGHLY ORGANIZED. SINCE MIGRATORY WORKERS HAVE BEEN SO IMPORTANT TO THE UNITED STATES ECONOMY AND HAVE DERIVED SO LITTLE…

Near-optimal response of instantaneous transpiration efficiency to vapour pressure deficit, temperature and [CO2] in cotton (Gossypium hirsutum L.).

USDA-ARS?s Scientific Manuscript database

The instantaneous transpiration efficiency (ITE, the ratio of photosynthesis rate to transpiration) is an important variable for crops, because it ultimately affects dry mass production per unit of plant water lost to the atmosphere. The theory that stomata optimize carbon uptake per unit water used...

F-35 Sustainment: DOD Needs a Plan to Address Risks Related to Its Central Logistics System

DTIC Science & Technology

2016-04-01

Navy are to declare the ability to operate and deploy the F-35 in 2016 and 2018 respectively, and full-rate production of the aircraft is to begin...capability”) in 2016 and 2018 respectively, and full-rate production decision of the program is planned for 2019.2 Recognizing that a fully...Government, GAO-04-546G (Washington, D.C.: March 2004). 11The international partners are the United Kingdom, Italy, the Netherlands, Turkey

Situational leadership style as a predictor of success and productivity among Taiwanese business organizations.

PubMed

Silverthorne, C; Wang, T H

2001-07-01

The present study was an evaluation of the impact of Taiwanese leadership styles on the productivity of Taiwanese business organizations. Specifically, it looked at the impact that both adaptive and nonadaptive leaders have on 6 measures of productivity: absenteeism, turnover rate, quality of work, reject rates, profitability, and units produced. The results indicated that the greater the level of adaptability, the more productive the organization is likely to be. Although not all of the computed correlations were statistically significant, they were all in the predicted directions. In particular, the findings for units produced and reject rates were consistently statistically significant. The study was also an examination of the usefulness of the Leadership Effectiveness and Adaptability Description (LEAD) questionnaire (P. Hersey & K. Blanchard, 1988), which appeared to be an accurate predictor of adaptability and valid for use in Taiwan. The final part of this study was an investigation of whether successful companies were more likely to have a greater percentage of adaptive leaders than unsuccessful companies. The data supported this expectation, although it is suggested that caution be used in the interpretation of this particular finding because it could have several different explanations. Overall, the evidence supported the value of adaptive leadership styles in high-technology industries in Taiwan.

A Study of United States Army Product Support Manager (PSM) Training

DTIC Science & Technology

2016-03-25

relevant policy and data associated with Product Support Manager (PSM) responsibilities, measure the current status of PSM training and selection, and...Year (FY) 16 (U.S. Department of Defense, 2015) which encompasses a need for processes, procedures, policies and regulations by which to accomplish...availability rates , and reduce operation and sustainment costs (C) Conduct appropriate cost analyses to validate the product support strategy

When is hardwood cable logging economical?

Treesearch

Chris B. LeDoux

1985-01-01

Using cable logging to harvest eastern hardwood logs on steep terrain can result in low production rates and high costs per unit of wood produced. Logging managers can improve productivity and profitability by knowing how the interaction of site-specific variables and cable logging equipment affect costs and revenues. Data from selected field studies and forest model...

Off-Line Catalog Production.

ERIC Educational Resources Information Center

OCLC Online Computer Library Center, Inc., Dublin, OH.

The Ohio College Library Center's off-line catalog system is a limited technique for production of card catalogs. Unlike the on-line system, it cannotmake the resources of a region available to users in an individual institution, and it does not have the potential for significantly reducing rate of rise of library per-unit costs. In short, it is…

75 FR 29776 - Tobacco Product Advertising and Promotion to Youth and Racial and Ethnic Minority Populations...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-27

... designed to appeal to specific racial and ethnic minority populations in the United States. For the same... Tobacco products are responsible for more than 440,000 deaths each year. The rates of tobacco use and..., ``[t]argeting of various population groups--including * * * specific racial and ethnic populations...

Optimization of solar thermal dryer designs for the production of sun-dried apricots (Prunus armeniaca)(abstract)

USDA-ARS?s Scientific Manuscript database

Solar thermal (ST) drying is a ubiquitous method that has had widespread use for fruit and vegetable crop preservation in developing countries. Conversely, in the United States solar thermal drying has found limited commercialization due to concerns about slow drying rates and poor product quality. ...

Is the caesarean section rate a performance indicator of an obstetric unit?

PubMed

Singh, Ruchi; Nath Trivedi, Amarendra

2011-02-01

The indications of caesarean section are increasing. The need to respect maternal desire in the decision making has been supported by law and ethics. Some of the other contributors to the increasing caesarean section rate are breech with failed external cephalic version, decreasing rate of trial of scar, increasing induction rate and electronic fetal heart rate monitoring and changing demography. Despite the adverse effects of caesarean section, the incidence of severe morbidity and mortality is low. The strategies put forward to reduce the caesarean section rate (CSR) have not been effective and in no country or province, the CSR has come down. CSR should not be looked at in isolation or as high or low. It is the product of changing obstetric practice and societal norms and demographics. CSR not reflect the performance of a maternity unit.

Implementing the Use of Chemical-Free Products in a Perinatal Unit.

PubMed

Brower, Anne; Trefz, Lisa; Burns, Catherine

2015-01-01

To develop a process to identify, adopt, and increase individual awareness of the use of chemical-free products in perinatal hospital units and to develop leadership skills of the fellow/mentor pair through the Sigma Theta Tau International Maternal-Child Health Nurse Leadership Academy (STTI MCHNLA). Pretest/posttest quality improvement project. Tertiary care 80-bed perinatal unit. Mothers and newborns on perinatal unit. The chemical hazard ratings of products currently in use and new products were examined and compared. Chemical-free products were selected and introduced to the hospital system, and education programs were provided for staff and patients. We implemented leadership tools taught at the STTI MCHNLA to facilitate project success. Pre- and postproject evaluations were used to determine interest in the use of chemical-free products and satisfaction with use of the new products. Cost savings were measured. Products currently in use contained potentially harmful chemicals. New, chemical-free products were identified and adopted into practice. Participants were interested in using chemical-free products. Once new products were available, 71% of participants were positive about using them. The fellow and mentor experienced valuable leadership growth throughout the project. The change to chemical-free products has positioned the organization and partner hospitals as community leaders that set a health standard to reduce environmental exposure for patients, families, and staff. The fellow and mentor learned new skills to assist in practice changes in a large organization by using the tools shared in the STTI MCHNLA. © 2015 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses.

Runoff nutrient transport as affected by land application method, swine growth stage, and runoff rate

USDA-ARS?s Scientific Manuscript database

This study was conducted to measure the effects of slurry application method, swine growth stage, and flow rate on runoff nutrient transport. Swine slurry was obtained from production units containing grower pigs, finisher pigs, or sows and gilts. The swine slurry was applied using broadcast, disk, ...

Sediment production from forest road surfaces.

Treesearch

Leslie Reid; T. Dunne

2011-01-01

Erosion on roads is an important source of fine-grained sediment in streams draining logged basins of the Pacific Northwest. Runoff rates and sediment concentrations from 10 road segments subject to a variety of traffic levels were monitored to produce sediment rating curves and unit hydrographs for different use levels and types of surfaces. These relationships are...

The CSIS Strengthening of America Commission, First Report.

ERIC Educational Resources Information Center

Center for Strategic and International Studies, Washington, DC.

Although the United States has the largest economy in the world, it has vulnerabilities. The growth rate of productivity has slowed. The U.S. net national savings rate is at an all-time low. The nation's educational system is performing well below the best international levels. A disenchanted electorate views federal institutions with increasing…

Optimal Cycle Time and Preservation Technology Investment for Deteriorating Items with Price-sensitive Stock-dependent Demand Under Inflation

NASA Astrophysics Data System (ADS)

Shah, Nita H.; Shah, Arpan D.

2014-04-01

The article analyzes economic order quantity for the retailer who has to handle imperfect quality of the product and the units are subject to deteriorate at a constant rate. To control deterioration of the units in inventory, the retailer has to deploy advanced preservation technology. Another challenge for the retailer is to have perfect quality product. This requires mandatory inspection during the production process. This model is developed with the condition of random fraction of defective items. It is assumed that after inspection, the screened defective items are sold at a discounted rate instantly. Demand is considered to be price-sensitive stock-dependent. The model is incorporating effect of inflation which is critical factor globally. The objective is to maximize profit of the retailer with respect to preservation technology investment, order quantity and cycle time. The numerical example is given to validate the proposed model. Sensitivity analysis is carried out to work out managerial issues.

Economic analysis and assessment of syngas production using a modeling approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Hakkwan; Parajuli, Prem B.; Yu, Fei

Economic analysis and modeling are essential and important issues for the development of current feedstock and process technology for bio-gasification. The objective of this study was to develop an economic model and apply to predict the unit cost of syngas production from a micro-scale bio-gasification facility. An economic model was programmed in C++ computer programming language and developed using a parametric cost approach, which included processes to calculate the total capital costs and the total operating costs. The model used measured economic data from the bio-gasification facility at Mississippi State University. The modeling results showed that the unit cost ofmore » syngas production was $1.217 for a 60 Nm-3 h-1 capacity bio-gasifier. The operating cost was the major part of the total production cost. The equipment purchase cost and the labor cost were the largest part of the total capital cost and the total operating cost, respectively. Sensitivity analysis indicated that labor costs rank the top as followed by equipment cost, loan life, feedstock cost, interest rate, utility cost, and waste treatment cost. The unit cost of syngas production increased with the increase of all parameters with exception of loan life. The annual cost regarding equipment, labor, feedstock, waste treatment, and utility cost showed a linear relationship with percent changes, while loan life and annual interest rate showed a non-linear relationship. This study provides the useful information for economic analysis and assessment of the syngas production using a modeling approach.« less

Novel web-based real-time dashboard to optimize recycling and use of red cell units at a large multi-site transfusion service.

PubMed

Sharpe, Christopher; Quinn, Jason G; Watson, Stephanie; Doiron, Donald; Crocker, Bryan; Cheng, Calvino

2014-01-01

Effective blood inventory management reduces outdates of blood products. Multiple strategies have been employed to reduce the rate of red blood cell (RBC) unit outdate. We designed an automated real-time web-based dashboard interfaced with our laboratory information system to effectively recycle red cell units. The objective of our approach is to decrease RBC outdate rates within our transfusion service. The dashboard was deployed in August 2011 and is accessed by a shortcut that was placed on the desktops of all blood transfusion services computers in the Capital District Health Authority region. It was designed to refresh automatically every 10 min. The dashboard provides all vital information on RBC units, and implemented a color coding scheme to indicate an RBC unit's proximity to expiration. The overall RBC unit outdate rate in the 7 months period following implementation of the dashboard (September 2011-March 2012) was 1.24% (123 units outdated/9763 units received), compared to similar periods in 2010-2011 and 2009-2010: 2.03% (188/9395) and 2.81% (261/9220), respectively. The odds ratio of a RBC unit outdate postdashboard (2011-2012) compared with 2010-2011 was 0.625 (95% confidence interval: 0.497-0.786; P < 0.0001). Our dashboard system is an inexpensive and novel blood inventory management system which was associated with a significant reduction in RBC unit outdate rates at our institution over a period of 7 months. This system, or components of it, could be a useful addition to existing RBC management systems at other institutions.

Photosynthetic production of hydrogen. [Blue-green alga, Anabaena cylindrica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neil, G.; Nicholas, D.J.D.; Bockris, J.O.

A systematic investigation of photosynthetic hydrogen production using a blue-green alga, Anabaena cylindrica, was carried out. The results indicate that there are two important problems which must be overcome for large-scale hydrogen production using photosynthetic processes. These are (a) the development of a stable system, and (b) attainment of at least a fifty-fold increase in the rate of hydrogen evolution per unit area illuminated.

The future viability of algae-derived biodiesel under economic and technical uncertainties.

PubMed

Brownbridge, George; Azadi, Pooya; Smallbone, Andrew; Bhave, Amit; Taylor, Benjamin; Kraft, Markus

2014-01-01

This study presents a techno-economic assessment of algae-derived biodiesel under economic and technical uncertainties associated with the development of algal biorefineries. A global sensitivity analysis was performed using a High Dimensional Model Representation (HDMR) method. It was found that, considering reasonable ranges over which each parameter can vary, the sensitivity of the biodiesel production cost to the key input parameters decreases in the following order: algae oil content>algae annual productivity per unit area>plant production capacity>carbon price increase rate. It was also found that the Return on Investment (ROI) is highly sensitive to the algae oil content, and to a lesser extent to the algae annual productivity, crude oil price and price increase rate, plant production capacity, and carbon price increase rate. For a large scale plant (100,000 tonnes of biodiesel per year) the production cost of biodiesel is likely to be £0.8-1.6 per kg. Copyright © 2013 Elsevier Ltd. All rights reserved.

Informed consent should be obtained from patients to use products (skin substitutes) and dressings containing biological material.

PubMed

Enoch, S; Shaaban, H; Dunn, K W

2005-01-01

Biological products (tissue engineered skin, allograft and xenograft, and biological dressings) are widely used in the treatment of burns, chronic wounds, and other forms of acute injury. However, the religious and ethical issues, including consent, arising from their use have never been addressed in the medical literature. This study was aimed to ascertain the views of religious leaders about the acceptability of biological products and to evaluate awareness among healthcare professionals about their constituents. The religious groups that make up about 75% of the United Kingdom population were identified and a questionnaire on 11 biological products was sent to its leaders. Another questionnaire concerning 17 products (11 biological and 6 synthetic dressings) was sent to 100 healthcare professionals working in seven specialist units in the UK. All religious leaders (100% response rate) replied, some after consultation with international bodies. Among them, 77% said that patients should be informed of the constituents of the biological products and consent obtained. Some leaders expressed concerns about particular products including the transmission of viral and prion diseases, cruelty to animals, and material derived from neonates. None of the healthcare professionals (73% response rate) surveyed knew the constituents of all the products correctly. Ignoring religious sensitivities and neglecting consent in the usage of biological products could have very serious implications, including litigation. Hospitals and manufacturers should take immediate measures to enlighten healthcare professionals of the constituents of these products so that they can obtain informed consent from patients.

Photochemically induced carbon dioxide production as a mechanism for carbon loss from plant litter in arid ecosystems

NASA Astrophysics Data System (ADS)

Brandt, L. A.; Bohnet, C.; King, J. Y.

2009-06-01

We investigated the potential for abiotic mineralization to carbon dioxide (CO2) via photodegradation to account for carbon (C) loss from plant litter under conditions typical of arid ecosystems. We exposed five species of grass and oak litter collected from arid and mesic sites to a factorial design of ultraviolet (UV) radiation (UV pass, UV block), and sterilization under dry conditions in the laboratory. UV pass treatments produced 10 times the amount of CO2 produced in UV block treatments. CO2 production rates were unaffected by litter chemistry or sterilization. We also exposed litter to natural solar radiation outdoors on clear, sunny days close to the summer solstice at midlatitudes and found that UV radiation (280-400 nm) accounted for 55% of photochemically induced CO2 production, while shortwave visible radiation (400-500 nm) accounted for 45% of CO2 production. Rates of photochemically induced CO2 production on a per-unit-mass basis decreased with litter density, indicating that rates depend on litter surface area. We found no evidence for leaching, methane production, or facilitation of microbial decomposition as alternative mechanisms for significant photochemically induced C loss from litter. We conclude that abiotic mineralization to CO2 is the primary mechanism by which C is lost from litter during photodegradation. We estimate that CO2 production via photodegradation could be between 1 and 4 g C m-2 a-1 in arid ecosystems in the southwestern United States. Taken together with low levels of litter production in arid systems, photochemical mineralization to CO2 could account for a significant proportion of annual carbon loss from litter in arid ecosystems.

E-Cigarette Market Trends in Traditional U.S. Retail Channels, 2012–2013

PubMed Central

Hammond, David; Corey, Catherine G.; Ambrose, Bridget K.; Delnevo, Cristine D.

2015-01-01

Introduction: E-cigarette sales continue to increase in the United States. To date, little surveillance research has documented the specific product attributes driving growth. This study uses national market scanner data to describe sales trends in traditional U.S. tobacco retail channels between 2012 and 2013 and identifies product features associated with sales increases. Methods: Data on e-cigarette sales in convenience stores, drug stores, grocery stores, and mass merchandisers in the United States were obtained from the Nielsen Company. Each product was coded for attributes such as brand, flavor, and unit size. Total sales volume, market share, and percent growth were calculated for various product attributes. Results: E-cigarette sales more than doubled between 2012 and 2013, from $273.6 million to $636.2 million, respectively. Growth was particularly strong in the convenience store channel. Blu eCigs quickly emerged as the best-selling brand and in 2013 constituted nearly half (44.1%) of overall sales. Although fruit-flavored and other flavored products experienced marked growth, unflavored and menthol e-cigarettes overwhelmingly dominated the market. Sales of single unit products (likely disposable e-cigarettes) increased by 216.4%, a much faster rate than multi-unit packs and cartridge refills. Conclusions: In traditional U.S. retail channels, particularly the convenience store channel, sales of e-cigarettes continue to grow, with brands like blu and disposable products as the likely drivers. Given the rapidly-changing market, expanded surveillance is needed to monitor sales not only in traditional retail locations, but sales online and in specialty “vape shops,” as well. PMID:25542918

Energy Resources Available to the United States, 1985 to 2000.

ERIC Educational Resources Information Center

Hayes, Earl T.

1979-01-01

Our energy growth is slowing down and will level off in the 1990s. Our oil and gas production passed a peak in the early 1970s. Coal is the only fossil fuel capable of increased production. Finding rates for petroleum, natural gas, and uranium are less than half what they were twenty years ago. (Author/BB)

Limits to Bureaucratic Growth: The Density Dependence of Organizational Rule Births.

ERIC Educational Resources Information Center

Schulz, Martin

1998-01-01

Uses a population-ecology approach to examine whether bureaucratic rules breed more rules. Tests hypotheses about rule births with time-series data on rule production in a large United States research university. Results show that the rate of rule production declines with the number of rules in a rule population over time. Rules inhibit…

26 CFR 1.1388-1 - Definitions and special rules.

Code of Federal Regulations, 2013 CFR

2013-04-01

... having a face value calculated at the rate of 5 cents per unit. During the operation of the pool, and before substantially all the products in the pool are disposed of, cooperative A advances to W an... sold and the anticipated price of the unsold products. At the close of the pool on November 10, 1964...

26 CFR 1.1388-1 - Definitions and special rules.

Code of Federal Regulations, 2011 CFR

2011-04-01

... having a face value calculated at the rate of 5 cents per unit. During the operation of the pool, and before substantially all the products in the pool are disposed of, cooperative A advances to W an... sold and the anticipated price of the unsold products. At the close of the pool on November 10, 1964...

26 CFR 1.1388-1 - Definitions and special rules.

Code of Federal Regulations, 2012 CFR

2012-04-01

... having a face value calculated at the rate of 5 cents per unit. During the operation of the pool, and before substantially all the products in the pool are disposed of, cooperative A advances to W an... sold and the anticipated price of the unsold products. At the close of the pool on November 10, 1964...

26 CFR 1.1388-1 - Definitions and special rules.

Code of Federal Regulations, 2014 CFR

2014-04-01

... having a face value calculated at the rate of 5 cents per unit. During the operation of the pool, and before substantially all the products in the pool are disposed of, cooperative A advances to W an... sold and the anticipated price of the unsold products. At the close of the pool on November 10, 1964...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitts, J.P.

A waterflood initiated in the Suniland Field of Lynn County is expected to sustain the production rate of that field well past the year 2000. Discovered in the early 1950's. The Suniland is a San Andres-Glorieta reservoir that has produced more than 5.5 million bbl of oil. Production peaked at over 30,000 bbl/mo in 1957 and peak production was sustained for approximately 20 yr, when primary production began to decline. By 1976, production in the field declined to 9000 bbl/mo and unitization was being discussed. When injection began in September 1978, there was an immediate increase in production from 9000more » to 12500 bbl/mo. In a period of little over a year. That increase was not the result of injection, but the result of more efficient operating procedures. A more efficiency operation was achieved by cleaning up the wells, installing larger pumping units (320 Lufkins), and eliminating the competitive production practices by Commingling the productive zones from the top of the San Andres through the Glorieta.« less

The relationship of motor unit size, firing rate and force.

PubMed

Conwit, R A; Stashuk, D; Tracy, B; McHugh, M; Brown, W F; Metter, E J

1999-07-01

Using a clinical electromyographic (EMG) protocol, motor units were sampled from the quadriceps femoris during isometric contractions at fixed force levels to examine how average motor unit size and firing rate relate to force generation. Mean firing rates (mFRs) and sizes (mean surface-detected motor unit action potential (mS-MUAP) area) of samples of active motor units were assessed at various force levels in 79 subjects. MS-MUAP size increased linearly with increased force generation, while mFR remained relatively constant up to 30% of a maximal force and increased appreciably only at higher force levels. A relationship was found between muscle force and mS-MUAP area (r2 = 0.67), mFR (r2 = 0.38), and the product of mS-MUAP area and mFR (mS-MUAP x mFR) (r2 = 0.70). The results support the hypothesis that motor units are recruited in an orderly manner during forceful contractions, and that in large muscles only at higher levels of contraction ( > 30% MVC) do mFRs increase appreciably. MS-MUAP and mFR can be assessed using clinical EMG techniques and they may provide a physiological basis for analyzing the role of motor units during muscle force generation.

Employment and Training Policy in the United States during the Economic Crisis. Upjohn Institute Working Paper No. 10-161

ERIC Educational Resources Information Center

O'Leary, Christopher J.; Eberts, Randall W.

2009-01-01

This paper examines labor market conditions and public employment policies in the United States during what some are calling the Great Recession. We document the dramatic labor market changes that rapidly unfolded when the rate of gross domestic product growth turned negative, from the end of 2007 through early 2009. The paper reviews the…

State sales tax rates for soft drinks and snacks sold through grocery stores and vending machines, 2007.

PubMed

Chriqui, Jamie F; Eidson, Shelby S; Bates, Hannalori; Kowalczyk, Shelly; Chaloupka, Frank J

2008-07-01

Junk food consumption is associated with rising obesity rates in the United States. While a "junk food" specific tax is a potential public health intervention, a majority of states already impose sales taxes on certain junk food and soft drinks. This study reviews the state sales tax variance for soft drinks and selected snack products sold through grocery stores and vending machines as of January 2007. Sales taxes vary by state, intended retail location (grocery store vs. vending machine), and product. Vended snacks and soft drinks are taxed at a higher rate than grocery items and other food products, generally, indicative of a "disfavored" tax status attributed to vended items. Soft drinks, candy, and gum are taxed at higher rates than are other items examined. Similar tax schemes in other countries and the potential implications of these findings relative to the relationship between price and consumption are discussed.

Initial Closed Operation of the CELSS Test Facility Engineering Development Unit

NASA Technical Reports Server (NTRS)

Kliss, Mark

1995-01-01

As part of the NASA Controlled Ecological Life Support System (CELSS) Program, a CELSS Test Facility (CTF) is being planned for installation on the Space Station. The CTF will be used to provide data on the productivity and efficiency of a variety of CELSS higher plant crops grown sequentially from seed to harvest in the microgravity environment of the Space Station. Stringent environmental control will be maintained while fundamental crop productivity issues, such as carbon dioxide uptake and oxygen production rates, water transpiration rates, and biomass accumulation rates are obtained for comparison with ground-based data. In order to obtain an early realistic determination of the subsystem and system requirements necessary to provide the appropriate environmental conditions specified for CTF crop productivity experiments, an Engineering Development Unit (EDU) has been constructed and is undergoing initial operational testing at NASA Ames Research Center. The EDU is a ground-based testbed which will be used to characterize the integrated performance of major subsystem technologies, to evaluate hardware candidates and control strategies required for the CTF, and to further define the ability to meet CTF requirements within present Space Station constraints. This paper describes the initial closed operational testing of the EDU. Measured performance data are compared with the specified functional requirements and results from initial closed testing are presented. Plans for future science and technology testing are discussed.

Delivered volumes of enteral nutrition exceed prescribed volumes.

PubMed

Walker, Renee Nichole; Utech, Anne; Velez, Maria Eugenia; Schwartz, Katie

2014-10-01

Enteral nutrition (EN) provisions are typically calculated based on a 24-hour infusion period. However, feedings are often interrupted for daily activities, procedures, or gastrointestinal intolerance. The study's objective was to determine the delivered EN quantities provided to stable hospitalized patients, using cellular time and measured volumes to verify our EN calculation adjustment. A supply of consecutively numbered ready-to-hang (RTH) EN product was delivered to the bedside of 26 inpatients with established EN tolerance at goal rates on various types of nursing units. The dietitian weighed the volume remaining in the infusing product and recorded the measurement time. On the following days, the dietitian continued to weigh the infusing RTH product and the empty RTH bottles saved by nursing. The primary outcome was the difference between the prescribed and delivered EN provisions, which was calculated with a paired t test. Patients received significantly more calories in the delivered enteral feeding (mean [SD], 1678 [385] kcal) than prescribed calories in the EN order (1489 [246 kcal]; t = 3.736, P = .001), adjusting for observed time. No significant differences were found between nursing units, product, and rate. EN delivered may actually exceed ordered amounts by 5%–21% (mean, 12%) with feeding pump inaccuracy as the primary contributing factor. This differs from what others have found. Our findings support using a volume-based ordering system vs a rate-based ordering system for more accurate EN delivery.

2000 survey of window manufacturers on the subject of switchable glass

NASA Astrophysics Data System (ADS)

LaPointe, Michael R.; Sottile, Gregory M.

2001-11-01

The results of a 2000 survey of United States window manufacturers on the subject of switchable glass are discussed. The areas covered in this paper include awareness of the overall product category of switchable glass and various types of switchable glass, attitudes toward specific features of switchable glass, expectations for manufacturer production of such products, expectations for market penetration rates among end-product consumers, levels of price sensitivity among window manufacturers regarding switchable glass, and expectations for the pace of new product development within the window industry over the next five years.

Determinants of heat production in newborn lambs

NASA Astrophysics Data System (ADS)

Eales, F. A.; Small, J.

1980-06-01

Measurement of summit metabolism (the maximum rate of heat production) in lambs aged 1 or 4h revealed considerable between animal variation. Summit metabolism per unit body weight decreased as body weight increased whereas summit metabolism per unit body surface area was independent of body weight. Severe pre-partum hypoxia was apparently associated with a low summit metabolism at 1 or 4h of age which made such lambs very susceptible to hypothermia. This deficiency in heat production capacity did not appear to be a permanent featuresince most lambs so affected recovered full thermoregulatory ability by 12h of age. Feeding of colostrum conferred an immediate 18% increase in summit metabolism. The significance of these findings to the prevention of hypothermia in the newborn lamb is discussed.

New active substances authorized in the United Kingdom between 1972 and 1994

PubMed Central

Jefferys, David B; Leakey, Diane; Lewis, John A; Payne, Sandra; Rawlins, Michael D

1998-01-01

Aims The study was undertaken to assemble a list of all new active medicinal substances authorised in the United Kingdom between 1972 and 1994; to assess whether the pattern of introductions had changed; and to examine withdrawal rates and the reasons for withdrawal. Methods The identities of those new active substances whose manufacturers had obtained Product Licences between 1972 and 1994 were sought from the Medicines Control Agency's product data-base. For each substance relevant information was retrieved including the year of granting the Product Licence, its therapeutic class, whether currently authorised (and, if not, reason for withdrawal), and its nature (chemical, biological etc.). Results The Medicines Control Agency's data-base was cross-checked against two other data-bases for completeness. A total of 583 new active substances (in 579 products) were found to have been authorised over the study period. The annual rates of authorisation varied widely (9 to 40 per year). Whilst there was no evidence for any overall change in the annual rates of authorising new chemical entities, there has been a trend for increasing numbers of new products of biological origin to be authorised in recent years. Fifty-nine of the 583 new active substances have been withdrawn (1 each for quality and efficacy, 22 for safety, and 35 for commercial reasons). Conclusions For reasons that are unclear there is marked heterogeneity in the annual rates of authorisation of new active substances. Their 10 year survival is approximately 88% with withdrawals being, predominantly, for commercial or safety reasons. This confirms the provisional nature of assessments about safety at the time when a new active substance is introduced into routine clinical practice, and emphasises the importance of pharmacovigilance. PMID:9491828

Thermotropic Liquid Crystals with Nitrocinnamylidene Unit

DTIC Science & Technology

1988-10-14

added through dropping funnel. Stir for 2 hrs before precipitated from distilled water . The crude yellow product was redissolved in chloroform and dried...rate 1O*C/hr) for overnight. Filter through celite and ceramic filtration funnel before precipitating with distilled water . The crude product was...Table 1. Cinnamylidene-P-octyloxyaniline was synthesized primarily by reacting cinnamaldehyde with p-octyloxyaniline and exhibits no mesomorphic property

Break-even zones for cable yarding by log size

Treesearch

Chris B. LeDoux

1984-01-01

The use of cable logging to extract small pieces of residue wood may result in low rates of production and a high cost per unit of wood produced. However, the logging manager can improve yarding productivity and break-even in cable residue removal operations by using the proper planning techniques. In this study, break-even zones for specific young-growth stands were...

Coping with earthquakes induced by fluid injection

USGS Publications Warehouse

McGarr, Arthur F.; Bekins, Barbara; Burkardt, Nina; Dewey, James W.; Earle, Paul S.; Ellsworth, William L.; Ge, Shemin; Hickman, Stephen H.; Holland, Austin F.; Majer, Ernest; Rubinstein, Justin L.; Sheehan, Anne

2015-01-01

Large areas of the United States long considered geologically stable with little or no detected seismicity have recently become seismically active. The increase in earthquake activity began in the mid-continent starting in 2001 (1) and has continued to rise. In 2014, the rate of occurrence of earthquakes with magnitudes (M) of 3 and greater in Oklahoma exceeded that in California (see the figure). This elevated activity includes larger earthquakes, several with M > 5, that have caused significant damage (2, 3). To a large extent, the increasing rate of earthquakes in the mid-continent is due to fluid-injection activities used in modern energy production (1, 4, 5). We explore potential avenues for mitigating effects of induced seismicity. Although the United States is our focus here, Canada, China, the UK, and others confront similar problems associated with oil and gas production, whereas quakes induced by geothermal activities affect Switzerland, Germany, and others.

Nickel recycling in the United States in 2004

USGS Publications Warehouse

Goonan, Thomas G.

2009-01-01

As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of nickel from production through distribution and use, with particular emphasis on the recycling of industrial scrap (new scrap) and used products (old scrap) in 2004. This materials flow study includes a description of nickel supply and demand for the United States to illustrate the extent of nickel recycling and to identify recycling trends. Understanding how materials flow from a source through disposition can aid in improving the management of natural resource delivery systems. In 2004, the old scrap recycling efficiency for nickel was estimated to be 56.2 percent. In 2004, nickel scrap consumption in the United States was as follows: new scrap containing 13,000 metric tons (t) of nickel (produced during the manufacture of products), 12 percent; and old scrap containing 95,000 t of nickel (articles discarded after serving a useful purpose), 88 percent. The recycling rate for nickel in 2004 was 40.9 percent, and the percentage of nickel in products attributed to nickel recovered from nickel-containing scrap was 51.6 percent. Furthermore, U.S. nickel scrap theoretically generated in 2004 had the following distribution: scrap to landfills, 24 percent; recovered and used scrap, 50 percent; and unaccounted for scrap, 26 percent. Of the 50 percent of old scrap generated in the United States that was recovered and then used in 2004, about one-third was exported and two-thirds was consumed in the domestic production of nickel-containing products.

Use of short-term breath measures to estimate daily methane production by cattle.

PubMed

Velazco, J I; Mayer, D G; Zimmerman, S; Hegarty, R S

2016-01-01

Methods to measure enteric methane (CH4) emissions from individual ruminants in their production environment are required to validate emission inventories and verify mitigation claims. Estimates of daily methane production (DMP) based on consolidated short-term emission measurements are developing, but method verification is required. Two cattle experiments were undertaken to test the hypothesis that DMP estimated by averaging multiple short-term breath measures of methane emission rate did not differ from DMP measured in respiration chambers (RC). Short-term emission rates were obtained from a GreenFeed Emissions Monitoring (GEM) unit, which measured emission rate while cattle consumed a dispensed supplement. In experiment 1 (Expt. 1), four non-lactating cattle (LW=518 kg) were adapted for 18 days then measured for six consecutive periods. Each period consisted of 2 days of ad libitum intake and GEM emission measurement followed by 1 day in the RC. A prototype GEM unit releasing water as an attractant (GEM water) was also evaluated in Expt. 1. Experiment 2 (Expt. 2) was a larger study based on similar design with 10 cattle (LW=365 kg), adapted for 21 days and GEM measurement was extended to 3 days in each of the six periods. In Expt. 1, there was no difference in DMP estimated by the GEM unit relative to the RC (209.7 v. 215.1 g CH(4)/day) and no difference between these methods in methane yield (MY, 22.7 v. 23.7 g CH(4)/kg of dry matter intake, DMI). In Expt. 2, the correlation between GEM and RC measures of DMP and MY were assessed using 95% confidence intervals, with no difference in DMP or MY between methods and high correlations between GEM and RC measures for DMP (r=0.85; 215 v. 198 g CH(4)/day SEM=3.0) and for MY (r=0.60; 23.8 v. 22.1 g CH(4)/kg DMI SEM=0.42). When data from both experiments was combined neither DMP nor MY differed between GEM- and RC-based measures (P>0.05). GEM water-based estimates of DMP and MY were lower than RC and GEM (P<0.05). Cattle accessed the GEM water unit with similar frequency to the GEM unit (2.8 v. 3.5 times/day, respectively) but eructation frequency was reduced from 1.31 times/min (GEM) to once every 2.6 min (GEM water). These studies confirm the hypothesis that DMP estimated by averaging multiple short-term breath measures of methane emission rate using GEM does not differ from measures of DMP obtained from RCs. Further, combining many short-term measures of methane production rate during supplement consumption provides an estimate of DMP, which can be usefully applied in estimating MY.

Impact of overactive bladder on work productivity in the United States: results from EpiLUTS.

PubMed

Sexton, Chris C; Coyne, Karin S; Vats, Vasudha; Kopp, Zoe S; Irwin, Debra E; Wagner, Todd H

2009-03-01

Little research has focused on the impact of overactive bladder (OAB) on work productivity. Consequently, the impact of OAB and other lower urinary tract symptoms (LUTS) on work productivity was evaluated in employed men and women aged 40 to 65 in the United States. Data from a population-based, cross-sectional Internet survey were used to examine the impact of OAB symptoms on work productivity. US participants aged 40 to 65 working full- or part-time were included in the analysis. Participants were asked about the incidence of OAB and other LUTS and a series of questions about work productivity. Descriptive statistics and linear and logistic regressions were used to evaluate outcome differences for men and women by the OAB groups of no/minimal symptoms, continent OAB, and incontinent OAB. The response rate was 60%, and a total of 2876 men and 2820 women were analyzed. Men and women with incontinent OAB reported the lowest levels of work productivity and highest rates of daily work interference. Storage symptoms associated with OAB were most consistently associated with work productivity outcomes; however, significant associations were also found for other storage, voiding, and postmicturition LUTS. In this large US population-based study, OAB was highly prevalent and was associated with lower levels of work productivity. These findings add to the literature documenting the burden of OAB and other LUTS, underscoring the need for increased screening and treatment.

Nitrogen

USGS Publications Warehouse

Kramer, D.A.

2007-01-01

Ammonia was produced by 15 companies at 25 plants in 16 states in the United States during 2006. Fifty-seven percent of U.S. ammonia production capacity was centered in Louisiana, Oklahoma and Texas because of their large reserves of natural gas, the dominant domestic feedstock. In 2006, U.S. producers operated at about 72 percent of their rated capacity (excluding plants that were idle for the entire year). Five companies, Koch Nitrogen, Terra Industries, CF Industries, PCS Nitro-gen, and Agrium, in descending order, accounted for 79 percent U.S. ammonia production capacity. The United States was the world's fourth-ranked ammonia producer and consumer following China, India and Russia. Urea, ammonium nitrate, ammonium phosphates, nitric acid and ammonium sulfate were the major derivatives of ammonia in the United States, in descending order of importance.

Energy Sprawl Is the Largest Driver of Land Use Change in United States.

PubMed

Trainor, Anne M; McDonald, Robert I; Fargione, Joseph

2016-01-01

Energy production in the United States for domestic use and export is predicted to rise 27% by 2040. We quantify projected energy sprawl (new land required for energy production) in the United States through 2040. Over 200,000 km2 of additional land area will be directly impacted by energy development. When spacing requirements are included, over 800,000 km2 of additional land area will be affected by energy development, an area greater than the size of Texas. This pace of development in the United States is more than double the historic rate of urban and residential development, which has been the greatest driver of conversion in the United States since 1970, and is higher than projections for future land use change from residential development or agriculture. New technology now places 1.3 million km2 that had not previously experienced oil and gas development at risk of development for unconventional oil and gas. Renewable energy production can be sustained indefinitely on the same land base, while extractive energy must continually drill and mine new areas to sustain production. We calculated the number of years required for fossil energy production to expand to cover the same area as renewables, if both were to produce the same amount of energy each year. The land required for coal production would grow to equal or exceed that of wind, solar and geothermal energy within 2-31 years. In contrast, it would take hundreds of years for oil production to have the same energy sprawl as biofuels. Meeting energy demands while conserving nature will require increased energy conservation, in addition to distributed renewable energy and appropriate siting and mitigation.

E-Cigarette Market Trends in Traditional U.S. Retail Channels, 2012-2013.

PubMed

Giovenco, Daniel P; Hammond, David; Corey, Catherine G; Ambrose, Bridget K; Delnevo, Cristine D

2015-10-01

E-cigarette sales continue to increase in the United States. To date, little surveillance research has documented the specific product attributes driving growth. This study uses national market scanner data to describe sales trends in traditional U.S. tobacco retail channels between 2012 and 2013 and identifies product features associated with sales increases. Data on e-cigarette sales in convenience stores, drug stores, grocery stores, and mass merchandisers in the United States were obtained from the Nielsen Company. Each product was coded for attributes such as brand, flavor, and unit size. Total sales volume, market share, and percent growth were calculated for various product attributes. E-cigarette sales more than doubled between 2012 and 2013, from $273.6 million to $636.2 million, respectively. Growth was particularly strong in the convenience store channel. Blu eCigs quickly emerged as the best-selling brand and in 2013 constituted nearly half (44.1%) of overall sales. Although fruit-flavored and other flavored products experienced marked growth, unflavored and menthol e-cigarettes overwhelmingly dominated the market. Sales of single unit products (likely disposable e-cigarettes) increased by 216.4%, a much faster rate than multi-unit packs and cartridge refills. In traditional U.S. retail channels, particularly the convenience store channel, sales of e-cigarettes continue to grow, with brands like blu and disposable products as the likely drivers. Given the rapidly-changing market, expanded surveillance is needed to monitor sales not only in traditional retail locations, but sales online and in specialty "vape shops," as well. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Energy Sprawl Is the Largest Driver of Land Use Change in United States

PubMed Central

McDonald, Robert I.

2016-01-01

Energy production in the United States for domestic use and export is predicted to rise 27% by 2040. We quantify projected energy sprawl (new land required for energy production) in the United States through 2040. Over 200,000 km2 of additional land area will be directly impacted by energy development. When spacing requirements are included, over 800,000 km2 of additional land area will be affected by energy development, an area greater than the size of Texas. This pace of development in the United States is more than double the historic rate of urban and residential development, which has been the greatest driver of conversion in the United States since 1970, and is higher than projections for future land use change from residential development or agriculture. New technology now places 1.3 million km2 that had not previously experienced oil and gas development at risk of development for unconventional oil and gas. Renewable energy production can be sustained indefinitely on the same land base, while extractive energy must continually drill and mine new areas to sustain production. We calculated the number of years required for fossil energy production to expand to cover the same area as renewables, if both were to produce the same amount of energy each year. The land required for coal production would grow to equal or exceed that of wind, solar and geothermal energy within 2–31 years. In contrast, it would take hundreds of years for oil production to have the same energy sprawl as biofuels. Meeting energy demands while conserving nature will require increased energy conservation, in addition to distributed renewable energy and appropriate siting and mitigation. PMID:27607423

Hairy vetch biomass across the eastern United States: Effects of latitude, seeding rate and date, and termination timing

USDA-ARS?s Scientific Manuscript database

Hairy vetch (Vicia villosa Roth) is a winter annual legume cover crop that is often grown because it can provide a substantial amount of N to the following cash crop. Nitrogen accumulation is dependent on biomass production, which in turn is affected by climate, seeding rate and date, and timing of ...

78 FR 57445 - Fiscal Year 2014 WTO Tariff-Rate Quota Allocations for Raw Cane Sugar, Refined and Specialty...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-18

... Allocations for Raw Cane Sugar, Refined and Specialty Sugar, and Sugar-Containing Products AGENCY: Office of..., 2013, through Sept. 30, 2014) in-quota quantity of the tariff-rate quotas (TRQs) for imported raw cane...), the United States maintains TRQs for imports of raw cane sugar and refined sugar (syrups and molasses...

The Relationship between School Leadership and Graduation Coach Interventions in Rural and Urban Settings

ERIC Educational Resources Information Center

Amos, Christopher Nicholas

2012-01-01

The primary purpose for the Graduation Coach intervention is to increase the graduation rate and help schools produce a student that can be a productive citizen. The increasing dropout rate in the United States of America, coupled with the recent addition of some legislation, has forced schools and districts to implement programs to combat this…

MASTERS OF ANALYTICAL TRADECRAFT: CERTIFYING THE STANDARDS AND ANALYTIC RIGOR OF INTELLIGENCE PRODUCTS

DTIC Science & Technology

2016-04-01

Disclaimer The views expressed in this academic research paper are those of the author and do not reflect the official policy or position of the US...10 Figure 2: Proposed MAT Rating Badges..............................................................................16...establishing unit level certified Masters of Analytic Tradecraft (MAT) analysts to be trained and entrusted to evaluate and rate the standards and

Effect of a commercial housing system on egg quality during extended storage.

PubMed

Jones, D R; Karcher, D M; Abdo, Z

2014-05-01

Egg producers in the United States are utilizing a variety of commercial egg production systems to provide consumer choice and meet legislative requirements. Consumer egg grades in the United States were developed for conventional cage production, and it is unclear what effect alternative production systems might have on egg quality during retail and consumer home storage. The current study was undertaken to determine what changes in egg quality characteristics occur during extended cold storage for commercially produced conventional cage, enriched colony cage, and cage-free aviary eggs. During 12 wk of cold storage, egg weight, albumen height, Haugh unit, static compression shell strength, vitelline membrane strength and deformation, yolk index, shell dynamic stiffness, and whole egg total solids were monitored. Overall, aviary and enriched eggs were significantly (P < 0.05) heavier than conventional cage. Albumen height and Haugh unit (P < 0.05) were significantly greater for conventional cage than enriched eggs. Static compression shell strength was greatest (P < 0.05) for enriched eggs compared with aviary. No overall housing system effects for yolk measurements, shell dynamic stiffness, or whole egg total solids were observed. Albumen height, Haugh unit, and yolk quality measurements were all greatest at 0 and lowest at 12 wk of storage (P < 0.05). The rate of quality change among the housing systems for each measured attribute at 4, 6, and 12 wk was determined. Other than differences in the change of egg weight at 4 wk, no significant differences in the rate of quality decline were found among the housing systems. The results of the current study indicate that current US egg quality standards should effectively define quality for commercially produced conventional cage, enriched colony cage, and cage-free aviary eggs.

30 CFR 203.33 - To which production do I apply the RSV earned by qualified phase 2 and phase 3 ultra-deep wells...

Code of Federal Regulations, 2010 CFR

2010-07-01

... RELIEF OR REDUCTION IN ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief for Drilling Ultra... after May 18, 2007, reported on the Oil and Gas Operations Report, Part A (OGOR-A) for your lease under... the unitized portion of lease A (drilled after the ultra-deep well on the non-unitized portion of that...

Management of Microcircuit Obsolescence in a Pre-Production ACAT-ID Missile Program

DTIC Science & Technology

2002-12-01

and Engineering Center ASIC Application Specific Integrated Circuit AVCOM Avionics Component Obsolescence Management BRU Battery Replaceable Unit...then just a paper qualification, e.g. Board or Battery Replaceable Unit ( BRU ) testing. 5 After-market Package The Die is Available and Can Be...Encapsulated Microcircuits (PEM), speed change, failure rate) 8 Emulation Manufacture or re-engineering of a FFF Replacement 9 CCA or BRU Redesign Board

The possible roles of solar ultraviolet-B radiation and vitamin D in reducing case-fatality rates from the 1918–1919 influenza pandemic in the United States

PubMed Central

Giovannucci, Edward

2009-01-01

Deaths during the 1918–1919 influenza pandemic have been linked to both the influenza virus and secondary bacterial lung infections. Case fatality rates and percentage of influenza cases complicated by pneumonia were available from survey data for twelve United States locations in the 1918–1919 pandemic. This study analyzes case fatality rates and cases complicated by pneumonia with respect to estimated summertime and wintertime solar ultraviolet-B (UVB) doses as indicators of population mean vitamin D status. Substantial correlations were found for associations of July UVB dose with case fatality rates (r = −0.72, p = 0.009) and rates of pneumonia as a complication of influenza (r = −0.77, p = 0.005). Similar results were found for wintertime UVB. Vitamin D upregulates production of human cathelicidin, LL-37, which has both antimicrobial and antiendotoxin activities. Vitamin D also reduces the production of proinflammatory cytokines, which could also explain some of the benefit of vitamin D since H1N1 infection gives rise to a cytokine storm. The potential role of vitamin D status in reducing secondary bacterial infections and loss of life in pandemic influence requires further evaluation. PMID:20592793

Factors affecting the colour of lamb meat from the longissimus muscle during display: the influence of muscle weight and muscle oxidative capacity.

PubMed

Calnan, H B; Jacob, R H; Pethick, D W; Gardner, G E

2014-02-01

Spectrophotometric measures were used to determine the redness:browness (R630/R580) of 4238 lamb longissimus muscle after 3 days under simulated display. The results were analysed using linear mixed effects models. Environmental factors represented by effects such as kill group and site of production produced the greatest variation of up to 2.76 units in R630/R580. Isocitrate dehydrogenase activity, reflecting muscle oxidative capacity, reduced R630/R580 by 0.5 units. Selection for high muscling sires increased R630/R580 by 0.27 units, likely due to changes in muscle oxidative capacity. Lamb carcass weight also increased R630/R580 by 0.5 units. Analysis of genotypic factors influencing lamb size and growth rate such as sire type and dam breed further supported that increased growth rate improves meat R630/R580. Our findings suggest that breeding for increased growth rate and increased muscle weight could result in Australian lamb meat retaining its red colour for extended periods whilst on display. © 2013.

Economic Implementation and Optimization of Secondary Oil Recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cary D. Brock

The St Mary West Barker Sand Unit (SMWBSU or Unit) located in Lafayette County, Arkansas was unitized for secondary recovery operations in 2002 followed by installation of a pilot injection system in the fall of 2003. A second downdip water injection well was added to the pilot project in 2005 and 450,000 barrels of saltwater has been injected into the reservoir sand to date. Daily injection rates have been improved over initial volumes by hydraulic fracture stimulation of the reservoir sand in the injection wells. Modifications to the injection facilities are currently being designed to increase water injection rates formore » the pilot flood. A fracture treatment on one of the production wells resulted in a seven-fold increase of oil production. Recent water production and increased oil production in a producer closest to the pilot project indicates possible response to the water injection. The reservoir and wellbore injection performance data obtained during the pilot project will be important to the secondary recovery optimization study for which the DOE grant was awarded. The reservoir characterization portion of the modeling and simulation study is in progress by Strand Energy project staff under the guidance of University of Houston Department of Geosciences professor Dr. Janok Bhattacharya and University of Texas at Austin Department of Petroleum and Geosystems Engineering professor Dr. Larry W. Lake. A geologic and petrophysical model of the reservoir is being constructed from geophysical data acquired from core, well log and production performance histories. Possible use of an outcrop analog to aid in three dimensional, geostatistical distribution of the flow unit model developed from the wellbore data will be investigated. The reservoir model will be used for full-field history matching and subsequent fluid flow simulation based on various injection schemes including patterned water flooding, addition of alkaline surfactant-polymer (ASP) to the injected water, and high pressure air injection (HPAI) for in-situ low temperature oxidization (LTO) will be studied for optimization of the secondary recovery process.« less

Alachlor transformation patterns in aquatic field mesocosms under variable oxygen and nutrient conditions

USGS Publications Warehouse

Graham, D.W.; Miley, M.K.; Denoyelles, F.; Smith, Val H.; Thurman, E.M.; Carter, R.

2000-01-01

Alachlor is one of the most commonly used herbicides in both Europe and North America. Because of its toxic properties, its fate and attenuation in natural waters is practically important. This paper assesses factors that affect alachlor decay rate in aquatic systems using field-scale experimental units. In particular, we used field mesocosms (11.3 m3 outdoor fiberglass tanks) to examine the affect of oxygen level and other factors on decay rate in water columns. This is one of the first studies ever performed where diverse water column conditions have been successfully simulated using common mesocosm-scale facilities. Four treatments were assessed, including aerobic systems (aerobic); low nutrient, oxygen-stratified systems (stratified-LN); moderate nutrient, oxygen-stratified systems (stratified-HN); and anaerobic systems (anaerobic). The lowest half-lives were observed in the anaerobic units (9.7 days) followed by the aerobic (21 days), stratified-HN (22 days), and stratified-LN (46 days) units. Our results indicate that alachlor is transformed most rapidly under anaerobic conditions, although the ambient phosphorus level also appears to influence decay rate. In this study, two common alachlor breakdown products, ethane sulfonic acid (ESA) and oxanilic acid, were also monitored. Oxanilic acid was produced in greater quantities than ESA under all treatments with the highest levels being produced in the stratified-HN units. In general, our results suggest that previous laboratory data, which indicated that high rates of alachlor decay can occur under oxygen-free methanogenic conditions, is translatable to field-scale applications. Copyright (C) 2000 Elsevier Science Ltd.Alachlor is one of the most commonly used herbicides in both Europe and North America. Because of its toxic properties, its fate and attenuation in natural waters is practically important. This paper assesses factors that affect alachlor decay rate in aquatic systems using field-scale experimental units. In particular, we used field mesocosms (11.3 m3 outdoor fiberglass tanks) to examine the affect of oxygen level and other factors on decay rate in water columns. This is one of the first studies ever performed where diverse water column conditions have been successfully simulated using common mesocosm-scale facilities. Four treatments were assessed, including aerobic systems (aerobic); low nutrient, oxygen-stratified systems (stratified-LN); moderate nutrient, oxygen-stratified systems (stratified-HN); and anaerobic systems (anaerobic). The lowest half-lives were observed in the anaerobic units (9.7 days) followed by the aerobic (21 days), stratified-HN (22 days), and stratified-LN (46 days) units. Our results indicate that alachlor is transformed most rapidly under anaerobic conditions, although the ambient phosphorus level also appears to influence decay rate. In this study, two common alachlor breakdown products, ethane sulfonic acid (ESA) and oxanilic acid, were also monitored. Oxanilic acid was produced in greater quantities than ESA under all treatments with the highest levels being produced in the stratified-HN units. In general, our results suggest that previous laboratory data, which indicated that high rates of alachlor decay can occur under oxygen-free methanogenic conditions, is translatable to field-scale applications.Aquatic field mesocosms were used to examine the influence of DO concentration and the presence of nutrients on alachlor transformation. Four treatments were used: wholly aerobic water columns, thermally and oxygen stratified water columns with low nutrient levels, stratified water columns with moderate nutrient levels, and wholly anaerobic water columns. The anaerobic treatment produced the highest rate of alachlor decay, followed by the aerobic and stratified treatments. The lowest decay rate occurred in the aerobic, low-nutrient stratified units.

Community metabolism during early development of a restored wetland

USGS Publications Warehouse

McKenna, J.E.

2003-01-01

Productivity is an important ecological function of any natural system and may be quite high in wetlands. Restoration of productive wetlands may play a key role in re-establishing ecological function to portions of the vast areas of wetlands (roughly 86%) drained and otherwise altered in the United States over the past two centuries. A restored wetland at the Montezuma National Wildlife Refuge (upstate New York, USA) was examined to determine if ecological function (i.e., productivity), as well as biotic structure, was restored. Physicochemical conditions and both aquatic and terrestrial productivity were measured at the restoration site and compared with rates and conditions in a reference wetland. Gross aquatic community production rates (based on diurnal oxygen curves) were similar at each site (1,679 and 2,311 g O2 · m−2 · yr−1) and within the range expected for the habitat. Terrestrial Net Aboveground Primary Production rates (measured by monthly biomass changes) (2,400 and 2,500 g dry wt. · m−2 · yr−1) were also similar between sites when tree and herb production were combined. Aquatic respiration rates (3,704 and 4,552 g O2 · m−2· yr−1) were also similar but high, typically more than twice as large as gross aquatic production. As a result, net aquatic production rates at both sites were usually negative, indicating that these small wetlands are organic matter sinks that satisfy aquatic respiration by consumption of both autochthonous aquatic production and imported terrestrial production. They enhance diversity of the local landscape by producing populations of aquatic consumers that cannot be supported by aquatic production alone. Typical wetland conditions and processes developed quickly after restoration, but differences in biotic community structure indicate that observed rates of production and respiration at both sites were maintained by flow through different foodweb pathways. Despite the relatively high process rates, and successional progress of the restoration site is expected to be slow.

Foreign direct investment outflows in the forest products industry: the case of the United States and Japan

Treesearch

R.V. Nagubadi; D. Zhang

2008-01-01

This paper investigates the determinants of foreign direct investment (FDI) outflows from two major forest product importing countries: the U.S. and Japan. Exchange rate, per capita income, cost of capital, and cost of labour in host countries have significant impacts on the FDI outflows from these two countries. A complementary relationship is found between forest...

Nitrogen

USGS Publications Warehouse

Kramer, D.A.

2006-01-01

In 2005, ammonia was produced by 15 companies at 26 plants in 16 states in the United States. Of the total ammonia production capacity, 55% was centered in Louisiana, Oklahoma and Texas because of their large reserves of natural gas. US producers operated at 66% of their rated capacity. In descending order, Koch Nitrogen, Terra Industries, CF Industries, Agrium and PCS Nitrogen accounted for 81% of the US ammonia production capacity.

Cable yarding residue after thinning young stands: a break-even simulation

Treesearch

Chris B. LeDoux

1984-01-01

The use of cable logging to extract small pieces of residue wood may result in low rates of production and a high cost per unit of wood produced. However, the logging manager can improve yarding productivity and break even in cable residue removal operations by using the proper planning techniques. In this study, breakeven zones for specific young-growth stands were...

Color and chemistry on Triton

NASA Technical Reports Server (NTRS)

Thompson, W. Reid; Sagan, Carl

1990-01-01

The surface of Triton is very bright but shows subtle yellow to peach hues which probably arise from the production of colored organic compounds from CH4 + N2 and other simple species. In order to investigate possible relationships between chemical processes and the observed surface distribution of chromophores, the surface units are classified according to color/albedo properties, the rates of production of organic chromophores by the action of ultraviolet light and high-energy charged particles is estimated, and rates, spectral properties, and expected seasonal redistribution processes are compared to suggest possible origins of the colors seen on Triton's surface.

Characterization of 14C in Swedish light water reactors.

PubMed

Magnusson, Asa; Aronsson, Per-Olof; Lundgren, Klas; Stenström, Kristina

2008-08-01

This paper presents the results of a 4-y investigation of 14C in different waste streams of both boiling water reactors (BWRs) and pressurized water reactors (PWRs). Due to the potential impact of 14C on human health, minimizing waste and releases from the nuclear power industry is of considerable interest. The experimental data and conclusions may be implemented to select appropriate waste management strategies and practices at reactor units and disposal facilities. Organic and inorganic 14C in spent ion exchange resins, process water systems, ejector off-gas and replaced steam generator tubes were analyzed using a recently developed extraction method. Separate analysis of the chemical species is of importance in order to model and predict the fate of 14C within process systems as well as in dose calculations for disposal facilities. By combining the results of this investigation with newly calculated production rates, mass balance assessments were made of the 14C originating from production in the coolant. Of the 14C formed in the coolant of BWRs, 0.6-0.8% was found to be accumulated in the ion exchange resins (core-specific production rate in the coolant of a 2,500 MWth BWR calculated to be 580 GBq GW(e)(-1) y(-1)). The corresponding value for PWRs was 6-10% (production rate in a 2,775 MWth PWR calculated to be 350 GBq GW(e)(-1) y(-1)). The 14C released with liquid discharges was found to be insignificant, constituting less than 0.5% of the production in the coolant. The stack releases, routinely measured at the power plants, were found to correspond to 60-155% of the calculated coolant production, with large variations between the BWR units.

Nomenclature and traceability debate for biosimilars: small-molecule surrogates lend support for distinguishable nonproprietary names.

PubMed

Chao, Jingdong; Skup, Martha; Alexander, Emily; Tundia, Namita; Macaulay, Dendy; Wu, Eric; Mulani, Parvez

2015-03-01

The purpose of the present study was to investigate the traceability of adverse events (AEs) for branded and generic drugs with identical nonproprietary names and to consider potential implications for the traceability of AEs for branded and biosimilar biologics. Adverse event reports in the Food and Drug Administration AE Reporting System (FAERS) were compared with those in a commercial insurance claims database (Truven Health MarketScan(®)) for 2 drugs (levetiracetam and enoxaparin sodium) with manufacturing or prescribing considerations potentially analogous to those of some biosimilars. Monthly rates of branded- and generic-attributed AEs were estimated pre- and post-generic entry. Post-entry branded-to-generic AE relative rate ratios were calculated. In FAERS, monthly AE rate ratios during the post-generic period showed a pattern in which AE rates for the branded products were greater than for the generic products. Differences in rates of brand- and generic-attributed AEs were statistically significant for both study drugs; the AE rate for the branded products peaked at approximately 10 times that of the generic levetiracetam products and approximately 4 times that of the generic enoxaparin sodium products. In contrast, monthly ratios for the MarketScan data were relatively constant over time. Use of the same nonproprietary name for generic and branded products may contribute to poor traceability of AEs reported in the FAERS database due to the significant misattribution of AEs to branded products (when those AEs were in fact associated with patient use of generic products). To ensure accurate and robust safety surveillance and traceability for biosimilar products in the United States, improved product identification mechanisms, such as related but distinguishable nonproprietary names for biosimilars and reference biologics, should be considered.

Aligning clinical compensation with clinical productivity: design and implementation of the financial value unit (FVU) system in an academic department of internal medicine.

PubMed

Stites, Steven; Steffen, Patrick; Turner, Scott; Pingleton, Susan

2013-07-01

A new metric was developed and implemented at the University of Kansas School of Medicine Department of Internal Medicine, the financial value unit (FVU). This metric analyzes faculty clinical compensation compared with clinical work productivity as a transparent means to decrease the physician compensation variability and compensate faculty equitably for clinical work.The FVU is the ratio of individual faculty clinical compensation compared with their total work relative value units (wRVUs) generated divided by Medical Group Management Association (MGMA) salary to wRVUs of a similar MGMA physician.The closer the FVU ratio is to 1.0, the closer clinical compensation is to that of an MGMA physician with similar clinical productivity. Using FVU metrics to calculate a faculty salary gap compared with MGMA median salary and wRVU productivity, a divisional production payment was established annually.From FY 2006 to FY 2011, both total faculty numbers and overall clinical activity increased. With the implementation of the FVU, both clinical productivity and compensation increased while, at the same time, physician retention rates remained high. Variability in physician compensation decreased. Dramatic clinical growth was associated with the alignment of clinical work and clinical compensation in a transparent and equable process.

F-35 Joint Strike Fighter: Preliminary Observations on Program Progress

DTIC Science & Technology

2016-03-23

partners are the United Kingdom, Italy, the Netherlands, Turkey , Canada, Australia, Denmark, and Norway. These nations contributed funds for system...Estimated delivery and production dates Initial operational capability 2010-2012 Undetermined 2015- 2018 undetermined 5-6 years Full-rate

Woody energy crops in the southeastern United States: Two centuries of practitioner experience$$\\star$$

DOE PAGES

Kline, Keith L.; Coleman, Mark D.

2010-12-01

Forest industry experts were consulted on the potential for hardwood tree species to serve as feedstock for bioenergy in the southeastern United States. Hardwoods are of interest for bioenergy because of desirable physical qualities, genetic research advances, and growth potential. Yet little data is available regarding potential productivity and costs. This paper describes required operations and provides a realistic estimate of the costs of producing bioenergy feedstock based on commercial experiences. Forestry practitioners reported that high productivity rates in southeastern hardwood plantations are confined to narrow site conditions or require costly inputs. Eastern cottonwood and American sycamore grow quickly onmore » rich bottomlands, but are also prone to pests and disease. Sweetgum is frost hardy, has few pest or disease problems, and grows across a broad range of sites, yet growth rates are relatively low. Eucalypts require fewer inputs than do other species and offer high potential productivity but are limited by frost to the lower Coastal Plain and Florida. Further research is required to study naturally regenerated hardwood biomass resources. Loblolly pine has robust site requirements, growth rates rivaling hardwoods, and lower costs of production. More time and investment in silviculture, selection, and breeding will be needed to develop hardwoods as competitive biofuel feedstock species. Because of existing stands and fully developed operations, the forestry community considers loblolly pine to be a prime candidate for plantation bioenergy in the Southeast.« less

The ALMA Band 3 (84-116 GHz) receiver production plan

NASA Astrophysics Data System (ADS)

Yeung, Keith; Claude, Stéphane; Loop, David

2008-07-01

The NRC Herzberg Institute of Astrophysics (NRC-HIA) is currently responsible to contribute Band 3 (84-116 GHz) receivers to the international ALMA project - a partnership involving North America, Europe and, now, Asia. Not only are the technical requirements for these receivers far more stringent than those for any existing radio astronomy receivers operating at these frequencies, but the delivery schedule for these receivers is equally challenging. Since the Asian partnership joined the ALMA project in 2006, NRC-HIA has been asked to deliver an additional 11 cartridges, for a total of 73 units. Some of these new cartridges will be used for the ALMA Compact Array (ACA) and others as spares. Moreover, the project has also requested that these additional cartridges be delivered in the same time period as the original 62 units. To meet this requirement, production must increase from the existing rate of one unit every four weeks to one every two, taxing the existing production infrastructure at NRC-HIA. Additional test facilities and human resources must be planned to sustain the required production rate over the next several years. Industrial involvement is one of the important elements in our production plan. In order to supplement the existing human resources at NRC-HIA, we are planning to outsource a number of low-risk and labor-intensive tasks to industry. However, NRC-HIA will retain overall project management responsibility and will conduct all the cartridge integration and acceptance test activities in-house. This paper focuses on the resource estimation, planning and project management required to deliver the Band 3 receivers to the ALMA project on time and on budget.

Ecologic analysis of asthma-related events and dispensing of inhaled corticosteroid- and salmeterol-containing products.

PubMed

DiSantostefano, Rachael L; Davis, Kourtney J; Yancey, Steve; Crim, Courtney

2008-06-01

An association between salmeterol use and serious asthma episodes or asthma-related mortality has been noted in 2 clinical trials; however, a causal relationship has not been established. To date, observational studies have not replicated this finding. To examine the relationship between number of prescriptions dispensed of salmeterol-containing products and inhaled corticosteroid (ICS)-containing products and the rates of asthma-related hospitalizations and mortality in the United States. In this ecologic study, annual age-adjusted rates of asthma-related hospitalization and asthma-related mortality from US population-based sources were graphed alongside annual number of prescriptions dispensed of salmeterol- and ICS-containing products by year from 1991 to 2004. We computed the Spearman rank correlations between number of prescriptions dispensed and serious events (asthma-related hospitalization rate, number of hospitalizations, asthma-related mortality rate, and number of asthma deaths). During more than 14 years, while number of prescriptions dispensed of salmeterol-containing and ICS-containing products increased, age-adjusted asthma-related mortality rates declined and asthma-related hospitalization rates remained relatively stable. The number of asthma-related deaths has decreased steadily since the mid-1990s. This study provides population-level evidence that asthma-related death rates declined and asthma-related hospitalization rates remained relatively constant for more than 14 years during a period of improvements in asthma management per treatment guidelines, including increased use of maintenance medications, such as ICSs and salmeterol.

RADIOLYTIC GAS PRODUCTION RATES OF POLYMERS EXPOSED TO TRITIUM GAS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, E.

Data from previous reports on studies of polymers exposed to tritium gas is further analyzed to estimate rates of radiolytic gas production. Also, graphs of gas release during tritium exposure from ultrahigh molecular weight polyethylene (UHMW-PE), polytetrafluoroethylene (PTFE, a trade name is Teflon®), and Vespel® polyimide are re-plotted as moles of gas as a function of time, which is consistent with a later study of tritium effects on various formulations of the elastomer ethylene-propylene-diene monomer (EPDM). These gas production rate estimates may be useful while considering using these polymers in tritium processing systems. These rates are valid at least formore » the longest exposure times for each material, two years for UHMW-PE, PTFE, and Vespel®, and fourteen months for filled and unfilled EPDM. Note that the production “rate” for Vespel® is a quantity of H{sub 2} produced during a single exposure to tritium, independent of length of time. The larger production rate per unit mass for unfilled EPDM results from the lack of filler- the carbon black in filled EPDM does not produce H{sub 2} or HT. This is one aspect of how inert fillers reduce the effects of ionizing radiation on polymers.« less

Lifetime of carbon capture and storage as a climate-change mitigation technology

PubMed Central

Szulczewski, Michael L.; MacMinn, Christopher W.; Herzog, Howard J.; Juanes, Ruben

2012-01-01

In carbon capture and storage (CCS), CO2 is captured at power plants and then injected underground into reservoirs like deep saline aquifers for long-term storage. While CCS may be critical for the continued use of fossil fuels in a carbon-constrained world, the deployment of CCS has been hindered by uncertainty in geologic storage capacities and sustainable injection rates, which has contributed to the absence of concerted government policy. Here, we clarify the potential of CCS to mitigate emissions in the United States by developing a storage-capacity supply curve that, unlike current large-scale capacity estimates, is derived from the fluid mechanics of CO2 injection and trapping and incorporates injection-rate constraints. We show that storage supply is a dynamic quantity that grows with the duration of CCS, and we interpret the lifetime of CCS as the time for which the storage supply curve exceeds the storage demand curve from CO2 production. We show that in the United States, if CO2 production from power generation continues to rise at recent rates, then CCS can store enough CO2 to stabilize emissions at current levels for at least 100 y. This result suggests that the large-scale implementation of CCS is a geologically viable climate-change mitigation option in the United States over the next century. PMID:22431639

Cost analysis of DAWT innovative wind energy systems

NASA Astrophysics Data System (ADS)

Foreman, K. M.

The results of a diffuser augmented wind turbine (DAWT) preliminary design study of three constructional material approaches and cost analysis of DAWT electrical energy generation are presented. Costs are estimated assuming a limited production run (100 to 500 units) of factory-built subassemblies and on-site final assembly and erection within 200 miles of regional production centers. It is concluded that with the DAWT the (busbar) cost of electricity (COE) can range between 2.0 and 3.5 cents/kW-hr for farm and REA cooperative end users, for sites with annual average wind speeds of 16 and 12 mph respectively, and 150 kW rated units. No tax credit incentives are included in these figures. For commercial end users of the same units and site characteristics, the COE ranges between 4.0 and 6.5 cents/kW-hr.

Sedimentary Catalysis of Radiolytic Hydrogen Production - A Global Perspective

NASA Astrophysics Data System (ADS)

Sauvage, J.; Spivack, A. J.; Smith, D. C.; Anderson, C. H.; Murray, R. W.; D'Hondt, S.

2016-12-01

Constraining rates of various energy- producing metabolic reactions is central to our understanding of subsurface microbial ecosystems. Radiolytic hydrogen (H2), produced by the radioactive splitting of water due to the natural decay of elements in the sediment, has been proposed to be a significant electron donor in sediment of oligothrophic oceanic regions. However accurate constraints of in situ production rates are required to test this hypothesis. We experimentally quantified radiolytic H2 yields (H2 produced per unit of absorbed energy in solution) due to γ radiation (Cs-137) and α radiation (Po-210) in marine sediment by exposing seawater slurries of sediment to radiation and measuring the production of H2. We selected 28 samples from different ocean basins and depositional environments aiming to capture the range of representative lithologies found across the global ocean. These experiments demonstrate that marine sediment greatly amplifies the production of radiolytic H2 production compared to pure water, with seawater-saturated abyssal clay exhibiting the highest yield. South Pacific Gyre [SPG], North Atlantic [NA] and North Pacific Gyre [NPG] abyssal clays amplify H2 production by factors of 13, 16 and 33, respectively. Calcareous ooze amplifies radiolytic H2 production by an average factor of 5. Despite continual production, dissolved H2 concentrations are generally below detection in oxic subseafloor sediment of the SPG, NPG and NA. This suggests that the aerobic H2 oxidation rate (Knallgas reaction) is essentially equal to its production rate in these environments. We assess the relative importance of buried organic matter and radiolytic H2 in terms of electron donor availability by comparing rates of radiolytic H2 production to rates of net O2 respiration (inferred to equal rates of organic oxidation). For NA, SPG and NPG abyssal clay older than a few million years, radiolytic H2 production rates are respectively factors of 20, 30 and 49 higher than rates of organic-fueled respiration rates. Extrapolating these results, we infer that radiolytic H2 is likely to be the predominant electron donor for subseafloor sedimentary communities throughout 37% of the global ocean.

[Product safety analysis of somatic cell cloned bovine].

PubMed

Hua, Song; Lan, Jie; Song, Yongli; Lu, Chenglong; Zhang, Yong

2010-05-01

Somatic cell cloning (nuclear transfer) is a technique through which the nucleus (DNA) of a somatic cell is transferred into an enucleated oocyte for the generation of a new individual, genetically identical to the somatic cell donor. It could be applied for the enhancement of reproduction rate and the improvement of food products involving quality, yield and nutrition. In recent years, the United States, Japan and Europe as well as other countries announced that meat and milk products made from cloned cattle are safe for human consumption. Yet, cloned animals are faced with a wide range of health problems, with a high death rate and a high incidence of disease. The precise causal mechanisms for the low efficiency of cloning remain unclear. Is it safe that any products from cloned animals were allowed into the food supply? This review focuses on the security of meat, milk and products from cloned cattle based on the available data.

Projected increase in lightning strikes in the United States due to global warming

NASA Astrophysics Data System (ADS)

Romps, David M.; Seeley, Jacob T.; Vollaro, David; Molinari, John

2014-11-01

Lightning plays an important role in atmospheric chemistry and in the initiation of wildfires, but the impact of global warming on lightning rates is poorly constrained. Here we propose that the lightning flash rate is proportional to the convective available potential energy (CAPE) times the precipitation rate. Using observations, the product of CAPE and precipitation explains 77% of the variance in the time series of total cloud-to-ground lightning flashes over the contiguous United States (CONUS). Storms convert CAPE times precipitated water mass to discharged lightning energy with an efficiency of 1%. When this proxy is applied to 11 climate models, CONUS lightning strikes are predicted to increase 12 ± 5% per degree Celsius of global warming and about 50% over this century.

Field efficacy and safety of fluralaner solution for administration in drinking water for the treatment of poultry red mite (Dermanyssus gallinae) infestations in commercial flocks in Europe.

PubMed

Thomas, Emmanuel; Chiquet, Mathieu; Sander, Björn; Zschiesche, Eva; Flochlay, Annie Sigognault

2017-10-09

Welfare concerns, production losses caused by Dermanyssus gallinae, the poultry red mite (PRM), and widespread mite resistance to environmentally applied acaricides continue to drive an urgent need for new and effective control measures. Fluralaner is a novel systemic acaricide developed to address that need. A series of field studies was initiated to investigate the safety and efficacy of a fluralaner solution (10 mg/ml) administered in drinking water at a dose rate of 0.5 mg/kg on two occasions with a 7-day interval, for treatment of natural PRM infestations in chickens. Blinded, negative-controlled studies were completed in Europe across eight layer, two breeder, and two replacement chicken farms. At each farm, two similar flocks were housed in similar PRM-infested units (either rooms within a building, or separate buildings) varying from 550 to 100,000 birds per unit. One unit at each farm was allocated to fluralaner treatment, administered in drinking water on Days 0 and 7. One unit remained untreated. Mite traps were placed throughout each unit on Days -1, 0 or 1, 3, 6, 9, and 13 or 14, then at weekly or two-weekly intervals, retrieved after 24 h and processed for mite counts. Efficacy at each farm was assessed by mean PRM count reductions from traps in treated units compared with those from control units. Production parameters and safety were also monitored. Efficacy was 95.3 to 99.8% on Day 3 and 97.8 to 100% on Day 9, thereafter remaining above 90% for 56 to 238 days after treatment initiation. Post-treatment improvement in egg-laying rate was greater by 0.9 to 12.6% in the treated group at 9 of the 10 layer or breeder farms. There were no treatment-related adverse events. Fluralaner administered at 0.5 mg/kg via drinking water twice, 7 days apart, was well tolerated and highly efficacious against the PRM in naturally infested chickens representing a range of production types and management systems. The results indicate that this novel treatment has potential to be the cornerstone of an integrated approach to reducing or eliminating the welfare and productivity costs of this increasingly threatening pest.

19 CFR 10.913 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Peru Trade Promotion Agreement... natural resources not included in paragraphs (g)(1) through (g)(4) of this section that are extracted or...; banners; marketing displays; free samples; sales, marketing, and after-sales service literature (product...

Uncertainty analysis and global sensitivity analysis of techno-economic assessments for biodiesel production.

PubMed

Tang, Zhang-Chun; Zhenzhou, Lu; Zhiwen, Liu; Ningcong, Xiao

2015-01-01

There are various uncertain parameters in the techno-economic assessments (TEAs) of biodiesel production, including capital cost, interest rate, feedstock price, maintenance rate, biodiesel conversion efficiency, glycerol price and operating cost. However, fewer studies focus on the influence of these parameters on TEAs. This paper investigated the effects of these parameters on the life cycle cost (LCC) and the unit cost (UC) in the TEAs of biodiesel production. The results show that LCC and UC exhibit variations when involving uncertain parameters. Based on the uncertainty analysis, three global sensitivity analysis (GSA) methods are utilized to quantify the contribution of an individual uncertain parameter to LCC and UC. The GSA results reveal that the feedstock price and the interest rate produce considerable effects on the TEAs. These results can provide a useful guide for entrepreneurs when they plan plants. Copyright © 2014 Elsevier Ltd. All rights reserved.

Big data modeling to predict platelet usage and minimize wastage in a tertiary care system.

PubMed

Guan, Leying; Tian, Xiaoying; Gombar, Saurabh; Zemek, Allison J; Krishnan, Gomathi; Scott, Robert; Narasimhan, Balasubramanian; Tibshirani, Robert J; Pham, Tho D

2017-10-24

Maintaining a robust blood product supply is an essential requirement to guarantee optimal patient care in modern health care systems. However, daily blood product use is difficult to anticipate. Platelet products are the most variable in daily usage, have short shelf lives, and are also the most expensive to produce, test, and store. Due to the combination of absolute need, uncertain daily demand, and short shelf life, platelet products are frequently wasted due to expiration. Our aim is to build and validate a statistical model to forecast future platelet demand and thereby reduce wastage. We have investigated platelet usage patterns at our institution, and specifically interrogated the relationship between platelet usage and aggregated hospital-wide patient data over a recent consecutive 29-mo period. Using a convex statistical formulation, we have found that platelet usage is highly dependent on weekday/weekend pattern, number of patients with various abnormal complete blood count measurements, and location-specific hospital census data. We incorporated these relationships in a mathematical model to guide collection and ordering strategy. This model minimizes waste due to expiration while avoiding shortages; the number of remaining platelet units at the end of any day stays above 10 in our model during the same period. Compared with historical expiration rates during the same period, our model reduces the expiration rate from 10.5 to 3.2%. Extrapolating our results to the ∼2 million units of platelets transfused annually within the United States, if implemented successfully, our model can potentially save ∼80 million dollars in health care costs.

Eye neoplasms research: a bibliometric analysis from 1966 to 2012.

PubMed

Boudry, Christophe; Mouriaux, Fréderic

2015-01-01

To calculate the growth rate of the biomedical literature on eye neoplasms and to assess which journals, countries, and continents are the most productive. PubMed was used to search for articles published from 1966 to 2012. Total number of articles per year was fitted to a linear equation as well as an exponential curve. To identify the core journals and predict the number of journals containing articles related to eye neoplasms, Bradford's law was applied. For each country and each continent, the gross domestic product (GDP) index (publications per $1 billion USD of GDP) and the population index (publications per million inhabitants) were calculated. A total of 27,943 references were retrieved. The growth in the number of publications showed a linear increase with a yearly average growth rate of 2.08%, which was lower than for the whole PubMed database (3.59%). Using Bradford's law, 17 core journals were identified, among which 2 journals produced more than 1000 articles (JAMA Ophthalmology and American Journal of Ophthalmology). Europe was the most productive continent, followed by North America and Asia. The United States was by far the predominant country in number of publications, followed by Germany and the United Kingdom. However, population and GDP indexes showed that absolute production did not reflect the production per capita or economic efficiency. This bibliometric study provides data contributing to a better understanding of the eye neoplasm research field.

Influence of corruption on economic growth rate and foreign investment

NASA Astrophysics Data System (ADS)

Podobnik, Boris; Shao, Jia; Njavro, Djuro; Ivanov, Plamen Ch.; Stanley, H. E.

2008-06-01

We analyze the dependence of the Gross Domestic Product ( GDP) per capita growth rates on changes in the Corruption Perceptions Index ( CPI). For the period 1999 2004 for all countries in the world, we find on average that an increase of CPI by one unit leads to an increase of the annual GDP per capita growth rate by 1.7%. By regressing only the European countries with transition economies, we find that an increase of CPI by one unit generates an increase of the annual GDP per capita growth rate by 2.4%. We also analyze the relation between foreign direct investments received by different countries and CPI, and we find a statistically significant power-law functional dependence between foreign direct investment per capita and the country corruption level measured by the CPI. We introduce a new measure to quantify the relative corruption between countries based on their respective wealth as measured by GDP per capita.

Human spinal cord injury: motor unit properties and behaviour.

PubMed

Thomas, C K; Bakels, R; Klein, C S; Zijdewind, I

2014-01-01

Spinal cord injury (SCI) results in widespread variation in muscle function. Review of motor unit data shows that changes in the amount and balance of excitatory and inhibitory inputs after SCI alter management of motoneurons. Not only are units recruited up to higher than usual relative forces when SCI leaves few units under voluntary control, the force contribution from recruitment increases due to elevation of twitch/tetanic force ratios. Force gradation and precision are also coarser with reduced unit numbers. Maximal unit firing rates are low in hand muscles, limiting voluntary strength, but are low, normal or high in limb muscles. Unit firing rates during spasms can exceed voluntary rates, emphasizing that deficits in descending drive limit force production. SCI also changes muscle properties. Motor unit weakness and fatigability seem universal across muscles and species, increasing the muscle weakness that arises from paralysis of units, motoneuron death and sensory impairment. Motor axon conduction velocity decreases after human SCI. Muscle contractile speed is also reduced, which lowers the stimulation frequencies needed to grade force when paralysed muscles are activated with patterned electrical stimulation. This slowing does not necessarily occur in hind limb muscles after cord transection in cats and rats. The nature, duration and level of SCI underlie some of these species differences, as do variations in muscle function, daily usage, tract control and fibre-type composition. Exploring this diversity is important to promote recovery of the hand, bowel, bladder and locomotor function most wanted by people with SCI. © 2013 Scandinavian Physiological Society. Published by John Wiley & Sons Ltd.

Production cost analysis of Euphorbia lathyris. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendel, D.A.; Schooley, F.A.; Dickenson, R.L.

1979-08-01

The purpose of SRI's study was to estimate the costs of producing Euphorbia in commercial quantities in five regions of the United States, which include both irrigated and nonirrigated areas. The study assumed that a uniform crop yield could be achieved in the five regions by varying the quantities of production inputs. Therefore, the production costs estimates, which are based on fourth quarter 1978 dollars, include both fixed and variable costs for each region. Doane's Machinery Custom Rates for 1978 were used to estimate all variable costs except materials, which were estimated separately. Custom rates are determined by members ofmore » the Doane Countywide Farm Panel, a group of farmers specifically selected to represent the various sizes and types of commercial farms found throughout the country. The rates reported are the most recent rates the panel members had either paid, charged, or known for certain a second party had paid or charged. Custom rates for any particular operation include equipment operating costs (fuel, lubrication, and repairs), equipment ownership costs (depreciation, taxes, interest), as well as a labor charge for the operator. Custom rates are regionally specific and thereby assist the accuracy of this analysis. Fixed costs include land, management, and transportation of the plant material to a conversion facility. When appropriate, fixed costs were regionally specific. Changes in total production costs over future time periods were not addressed. The total estimated production costs of Euphorbia in each region were compared with production costs for corn and alfalfa in the same regions. Finally, the effects on yield and costs of changes in the production inputs were estimated.« less

Apparatus for production of ultrapure amorphous metals utilizing acoustic cooling

NASA Technical Reports Server (NTRS)

Lee, M. C. (Inventor)

1985-01-01

Amorphous metals are produced by forming a molten unit of metal and deploying the unit into a bidirectional acoustical levitating field or by dropping the unit through a spheroidizing zone, a slow quenching zone, and a fast quenching zone in which the sphere is rapidly cooled by a bidirectional jet stream created in the standing acoustic wave field produced between a half cylindrical acoustic driver and a focal reflector or a curved driver and a reflector. The cooling rate can be further augmented first by a cryogenic liquid collar and secondly by a cryogenic liquid jacket surrounding a drop tower. The molten unit is quenched to an amorphous solid which can survive impact in a unit collector or is retrieved by a vacuum chuck.

Contrasted nitrogen utilization in annual C 3 grass and legume crops: Physiological explorations and ecological considerations

NASA Astrophysics Data System (ADS)

Del Pozo, Alejandro; Garnier, Eric; Aronson, James

2000-01-01

Although it is well known that legumes have unusually high levels of nitrogen in both reproductive and vegetative organs, the physiological implications of this pattern have been poorly assessed. We conducted a literature survey and used data from two (unpublished) experiments on annual legumes and C 3 grasses in order to test whether these high nitrogen concentrations in legumes are correlated to high rates of carbon gain. Three different temporal/spatial scales were considered: full growing season/stand, days to month/whole plant and seconds/leaf. At the stand level, and for plants grown under both extratropical and tropical settings, biomass per unit organic-nitrogen was lower in legume than in grass crops. At a shorter time scale, the relative growth rate per unit plant nitrogen (`nitrogen productivity') was lower in faba bean ( Vicia faba var. minor cv. Tina) than in wheat ( Triticum aestivum cv. Alexandria), and this was confirmed in a comparison of two wild, circum-Mediterranean annuals - Medicago minima, a legume, and Bromus madritensis, a grass. Finally, at the leaf level, a synthesis of published data comparing soybean ( Glycine max) and rice ( Oryza sativa) on the one hand, and our own data on faba bean and wheat on the other hand, demonstrates that the photosynthetic rate per unit leaf nitrogen (the photosynthetic nitrogen use efficiency) is consistently lower in legumes than in grasses. These results demonstrate that, regardless of the scale considered and although the organic-nitrogen concentration in vegetative organs of legumes is higher than in grasses, this does not lead to higher rates of carbon gain in the former. Various physiological factors affecting the efficiency of nitrogen utilization at the three time scales considered are discussed. The suggestion is made that the ecological significance of the high nitrogen concentration in legumes may be related to a high nitrogen demand for high quality seed production at a time when nitrogen fixation is shut off rather than to a high production potential.

The Relationship between the Level of Nurse Staffing and Nursing Incidents

DTIC Science & Technology

1992-01-01

1990). Nosocomial infection rates during a one-year period in a nursing home care unit of a Veterans Administration hospital. American Journal of...of Nursing Administration 18(7,8), 24-28. Hoffman, N., Jenkins, R., & Putney, K. (1990). Nosocomial infection rates during a one-year period in a...reported medication errors or treatment errors, falls, nosocomial infections , postpartum hemorrhages, IV-related incidents, blood and blood product

A Cost Analysis of the Ohio College Library Center On-Line Shared Cataloging System in the Ohio State University Libraries

ERIC Educational Resources Information Center

Morita, Ichiko T.; Gapen, D. Kaye

1977-01-01

A study of the costs of cataloging and associated processing tasks before and after the adoption of the Ohio College Library Center On-Line Shared Cataloging System at the Ohio State University Libraries finds that an increase in production has been achieved. Unit costs have risen at a rate less than the general rate of inflation. (Author)

Managing Pacific salmon escapements: The gaps between theory and reality

USGS Publications Warehouse

Knudsen, E. Eric; Knudsen, E. Eric; Steward, Cleveland R.; MacDonald, Donald D.; Williams, Jack E.; Reiser, Dudley W.

1999-01-01

There are myriad challenges to estimating intrinsic production capacity for Pacific salmon populations that are heavily exploited and/or suffering from habitat alteration. Likewise, it is difficult to determine whether perceived decreases in production are due to harvest, habitat, or hatchery influences, natural variation, or some combination of all four. There are dramatic gaps between the true nature of the salmon spawner/recruit relationship and the theoretical basis for describing and understanding the relationship. Importantly, there are also extensive practical difficulties associated with gathering and interpreting accurate escapement and run-size information and applying it to population management. Paradoxically, certain aspects of salmon management may well be contributing to losses in abundance and biodiversity, including harvesting salmon in mixed population fisheries, grouping populations into management units subject to a common harvest rate, and fully exploiting all available hatchery fish at the expense of wild fish escapements. Information on U.S. Pacific salmon escapement goal-setting methods, escapement data collection methods and estimation types, and the degree to which stocks are subjected to mixed stock fisheries was summarized and categorized for 1,025 known management units consisting of 9,430 known populations. Using criteria developed in this study, only 1% of U.S. escapement goals are by methods rated as excellent. Escapement goals for 16% of management units were rated as good. Over 60% of escapement goals have been set by methods rated as either fair or poor and 22% of management units have no escapement goals at all. Of the 9,430 populations for which any information was available, 6,614 (70%) had sufficient information to categorize the method by which escapement data are collected. Of those, data collection methods were rated as excellent for 1%, good for 1%, fair for 2%, and poor for 52%. Escapement estimates are not made for 44% of populations. Escapement estimation type (quality of the data resulting from survey methods) was rated as excellent for <1%, good for 30%, fair for 3%, poor for 22%, and nonexistent for 45%. Numerous recommendations for improvements in escapement mangement are made in this chapter. In general, improvements are needed on theoretical escapement management techniques, escapement goal setting methods, and escapement and run size data quality. There is also a need to change managers' and harvesters' expectations to coincide with the natural variation and uncertainty in the abundance of salmon populations. All the recommendations are aimed at optimizing the number of spawners-healthy escapements ensure salmon sustainability by providing eggs for future production, nutrients to the system, and genetic diversity.

Methods and consequences of including feed intake and efficiency in genetic selection for multiple-trait merit.

PubMed

Barwick, Stephen A; Henzell, Anthony L; Walmsley, Brad J; Johnston, David J; Banks, Robert G

2018-05-04

Methods are presented for including feed intake and efficiency in genetic selection for multiple-trait merit when commercial production is from any combination of pasture or concentrates. Consequences for the production system and for individual animals are illustrated with a beef cattle example. Residual feed intake at pasture (RFI-p), residual feed intake in the feedlot (RFI-f), and cow condition score are additional traits of the breeding objective. Feed requirement change is costed in the economic values of other objective traits. Selection responses are examined when feed costs are ignored, partially or fully included in the breeding objective, and when net feed intake (NFI) EBVs are added to the index. When all feed cost was included and NFI EBVs were in the index, selection (with selection intensity, i = 1) increased production system $ net return by 6.0%, $ per unit of product by 5.2%, $ per unit of feed by 6.6%, total product by 0.7% and product per unit of feed by 1.3%. There was little change in production system total feed. When feed cost was ignored, selection decreased production system $ net return, $ per unit of product, and $ per unit of feed. At the individual trait level, when feed was fully included there were increases in weaning weight-direct (0.8 kg), feedlot entry weight (1.4 kg), dressing % (0.04%), carcass meat % (0.36%), carcase fat depth (0.12 mm), carcass marbling score (0.02 score), cow condition score (0.01 score), calving ease-direct (0.97%), calving ease-maternal (0.22%) and cow weaning rate (1.3%), and decreases in weaning weight-maternal (-0.9 kg), RFI-p (-0.09 kg DM/d), RFI-f (-0.11 kg DM/d), sale weight (-1.6 kg) and cow weight (-8.7 kg). Gains were evident over a range of feed price. Selection for $ net return also increased $ net return per unit of feed, suggesting that $ net return per unit area would increase in grazing industries. Feed cost for trait change was the source of a major genotype × environment interaction affecting animal rankings. Where industry production environments vary, and feed cost for trait change varies with the environment, we recommend that industry indexes be derived for more than one level of feed cost. Cow condition score did not decline while biological and economic efficiency of the production system and individual animal were improving, suggesting that efficiency can be improved under multiple-trait selection without compromising breeding cow welfare.

Petroleum production at Maximum Efficient Rate Naval Petroleum Reserve No. 1 (Elk Hills), Kern County, California. Final Supplemental Environmental Impact Statement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-07-01

This document provides an analysis of the potential impacts associated with the proposed action, which is continued operation of Naval Petroleum Reserve No. I (NPR-1) at the Maximum Efficient Rate (MER) as authorized by Public law 94-258, the Naval Petroleum Reserves Production Act of 1976 (Act). The document also provides a similar analysis of alternatives to the proposed action, which also involve continued operations, but under lower development scenarios and lower rates of production. NPR-1 is a large oil and gas field jointly owned and operated by the federal government and Chevron U.SA Inc. (CUSA) pursuant to a Unit Planmore » Contract that became effective in 1944; the government`s interest is approximately 78% and CUSA`s interest is approximately 22%. The government`s interest is under the jurisdiction of the United States Department of Energy (DOE). The facility is approximately 17,409 acres (74 square miles), and it is located in Kern County, California, about 25 miles southwest of Bakersfield and 100 miles north of Los Angeles in the south central portion of the state. The environmental analysis presented herein is a supplement to the NPR-1 Final Environmental Impact Statement of that was issued by DOE in 1979 (1979 EIS). As such, this document is a Supplemental Environmental Impact Statement (SEIS).« less

Byproduct mineral commodities used for the production of photovoltaic cells

USGS Publications Warehouse

Bleiwas, Donald I.

2010-01-01

Rising fossil fuel costs, environmental concerns relating to global climate change, and Government policy to signifcantly increase our Nation's energy independence have placed greater emphasis on the generation of electricity from renewable sources, such as the Sun (light and heat), water, and wind, which for all intents and purposes are inexhaustible resources. Although the total amount of electricity generated from the direct conversion of sunlight through photovoltaic cells is relatively small compared with that from other forms of renewable energy, the rate of growth in the sector is signifcant. The total value of energy of photovoltaic cells produced worldwide increased to nearly 7 gigawatts (GW) in 2008 from 45 megawatts (MW) in 1990, a compound annual growth rate of about 30 percent. In the United States, manufacturing of photovoltaic cells has grown exponentially to about 480 MW in 2008, accounting for 6 percent of world production, from less than 10 MW of photovoltaic capacity in 1990 (Benner, 2007; U.S. Department of Energy, Energy Information Administration, 2010), a compound annual growth rate of approxi-mately 23 percent. A production capacity of 1 GW of electricity [or 8,760 gigawatthours1 (GWh)] is equivalent to the annual electricity requirements for roughly 800,000 average households in the United States (U.S. Department of Energy, Energy Information Administration, 2010). This estimate does not include losses of electricity, such as during transmission through power lines.

78 FR 21116 - Superior Supplier Incentive Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... (Quality of Product). Schedule. Cost Control. Management Responsiveness. Management of Key Personnel... unit can only be rated in either the goods or services category. In the event a contractor is within... will provide contractors with the greatest motivation to achieve SSS? 3. What contract terms and...

48 CFR 3452.224-70 - Release of information under the Freedom of Information Act.

Code of Federal Regulations, 2014 CFR

2014-10-01

...: (1) Unit prices, including labor rates; (2) Statements of Work/Performance Work Statements generated by the contractor; (3) Performance requirements, including incentives, performance standards, quality levels, and service level agreements; (4) Reports, deliverables, and work products delivered in...

48 CFR 3452.224-70 - Release of information under the Freedom of Information Act.

Code of Federal Regulations, 2012 CFR

2012-10-01

...: (1) Unit prices, including labor rates; (2) Statements of Work/Performance Work Statements generated by the contractor; (3) Performance requirements, including incentives, performance standards, quality levels, and service level agreements; (4) Reports, deliverables, and work products delivered in...

48 CFR 3452.224-70 - Release of information under the Freedom of Information Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

...: (1) Unit prices, including labor rates; (2) Statements of Work/Performance Work Statements generated by the contractor; (3) Performance requirements, including incentives, performance standards, quality levels, and service level agreements; (4) Reports, deliverables, and work products delivered in...

40 CFR 79.59 - Reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Carolina Pennsylvania Rhode Island South Carolina Vermont Virginia West Virginia (ii) The following States... annual sales revenue for the previous three years shall be given. (iii) If the manufacturer claims... products and their emission rates reported in units of grams/mile. (iii) [Reserved] (iv) Tier 2 appendices...

40 CFR 79.59 - Reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Carolina Pennsylvania Rhode Island South Carolina Vermont Virginia West Virginia (ii) The following States... annual sales revenue for the previous three years shall be given. (iii) If the manufacturer claims... products and their emission rates reported in units of grams/mile. (iii) [Reserved] (iv) Tier 2 appendices...

Use of technology and implications for the environment

USDA-ARS?s Scientific Manuscript database

The use of technology in beef cattle production has dramatically changed animal performance indices over the past 30 years. Several technologies such as implants, ionophores, and antimicrobial drugs have wide adoption rates in the United States. Other more recent technologies such as beta-agonists c...

[Traceability of labile blood products in Morocco: experience of the Ibn-Sina hospital of Rabat between 1999 and 2010].

PubMed

Ouadghiri, S; Atouf, O; Brick, C; Benseffaj, N; Essakalli, M

2012-02-01

The blood transfusion and haemovigilance service of the Ibn-Sina hospital in Rabat (Morocco) was created 1997. This unit manages the pretransfusional tests, distribution of blood products, traceability and haemovigilance. The objective of this study was to analyze, over a period of 12years, the traceability of blood products delivered in our hospital and the measures used to improve feedback information. This is a retrospective study conducted between 1999 and 2010. Traceability rate was calculated from the feedback of traceability forms supplied with blood products (number of blood products noted on traceability forms on the total number of delivered product). To improve traceability rate, several actions were undertaken: one-time training, awareness campaigns and call phones asking for feedback information. Between 1999 and 2010, the service has delivered 173,858 blood products. The average rate of traceability during this period was 13.4 %. Traceability rate varies widely over time (5.2 % in 1999, 15.5 % in 2010) and shows a maximum value of 27.2 % in 2005. Feedback information is lower in emergency departments than in medical and surgical services. Feedback information about traceability in Ibn-Sina hospital remains very poor despite the measures used. Other actions, such as continuous education courses, low enforcement and informatisation should be considered. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

[Pilot-scale purification of lipopeptide from marine-derived Bacillus marinus].

PubMed

Gu, Kangbo; Guan, Cheng; Xu, Jiahui; Li, Shulan; Luo, Yuanchan; Shen, Guomin; Zhang, Daojing; Li, Yuanguang

2016-11-25

This research was aimed at establishing the pilot-scale purification technology of lipopeptide from marine-derived Bacillus marinus. We studied lipopeptide surfactivity interferences on scale-up unit technologies including acid precipitation, methanol extraction, solvent precipitation, salting out, extraction, silica gel column chromatography and HZ806 macroporous absorption resin column chromatography. Then, the unit technologies were combined in a certain order, to remove the impurities gradually, and to gain purified lipopeptide finally, with high recovery rate throughout the whole process. The novel pilot-scale purification technology could effectively isolate and purify lipopeptide with 87.51% to 100% purity in hectograms from 1 ton of Bacillus marinus B-9987 fermentation broth with more than 81.73% recovery rate. The first practical hectogram production of highly purified lipopeptide derived from Bacillus marinus was achieved. With this new purification method, using complex media became possible in fermentation process to reduce the fermentation cost and scale-up the purification for lipopeptide production. For practicability and economy, foaming problem resulting from massive water evaporation was avoided in this technology.

Synchronization of motor unit firings: an epiphenomenon of firing rate characteristics not common inputs

PubMed Central

Kline, Joshua C.

2015-01-01

Synchronous motor unit firing instances have been attributed to anatomical inputs shared by motoneurons. Yet, there is a lack of empirical evidence confirming the notion that common inputs elicit synchronization under voluntary conditions. We tested this notion by measuring synchronization between motor unit action potential trains (MUAPTs) as their firing rates progressed within a contraction from a relatively low force level to a higher one. On average, the degree of synchronization decreased as the force increased. The common input notion provides no empirically supported explanation for the observed synchronization behavior. Therefore, we investigated a more probable explanation for synchronization. Our data set of 17,546 paired MUAPTs revealed that the degree of synchronization varies as a function of two characteristics of the motor unit firing rate: the similarity and the slope as a function of force. Both are measures of the excitation of the motoneurons. As the force generated by the muscle increases, the firing rate slope decreases, and the synchronization correspondingly decreases. Different muscles have motor units with different firing rate characteristics and display different amounts of synchronization. Although this association is not proof of causality, it consistently explains our observations and strongly suggests further investigation. So viewed, synchronization is likely an epiphenomenon, subject to countless unknown neural interactions. As such, synchronous firing instances may not be the product of a specific design and may not serve a specific physiological purpose. Our explanation for synchronization has the advantage of being supported by empirical evidence, whereas the common input does not. PMID:26490288

Synchronization of motor unit firings: an epiphenomenon of firing rate characteristics not common inputs.

PubMed

Kline, Joshua C; De Luca, Carlo J

2016-01-01

Synchronous motor unit firing instances have been attributed to anatomical inputs shared by motoneurons. Yet, there is a lack of empirical evidence confirming the notion that common inputs elicit synchronization under voluntary conditions. We tested this notion by measuring synchronization between motor unit action potential trains (MUAPTs) as their firing rates progressed within a contraction from a relatively low force level to a higher one. On average, the degree of synchronization decreased as the force increased. The common input notion provides no empirically supported explanation for the observed synchronization behavior. Therefore, we investigated a more probable explanation for synchronization. Our data set of 17,546 paired MUAPTs revealed that the degree of synchronization varies as a function of two characteristics of the motor unit firing rate: the similarity and the slope as a function of force. Both are measures of the excitation of the motoneurons. As the force generated by the muscle increases, the firing rate slope decreases, and the synchronization correspondingly decreases. Different muscles have motor units with different firing rate characteristics and display different amounts of synchronization. Although this association is not proof of causality, it consistently explains our observations and strongly suggests further investigation. So viewed, synchronization is likely an epiphenomenon, subject to countless unknown neural interactions. As such, synchronous firing instances may not be the product of a specific design and may not serve a specific physiological purpose. Our explanation for synchronization has the advantage of being supported by empirical evidence, whereas the common input does not. Copyright © 2016 the American Physiological Society.

Inferential control -- Part 1: Crude unit advanced controls pass accuracy and repeatability tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

San, Y.P.; Landells, K.C.; Mackay, D.C.

1994-11-28

An inferential model is one that provides a quality for which an analyzer is not available. This type of model uses readily available physical measurements -- such as temperatures, pressures, and flow rates -- to infer a quality such as kerosine flash point. The No. 2 crude distillation unit (CDU-2) at Singapore Refining Co. Pte. Ltd.'s Pulau Merlimau refinery has a nominal 130,000 b/d capacity. It produces naphtha, kerosine, diesel, and residue products from a wide range of crude blends. Over the past 12 months, extensive advanced control applications have been implemented on the unit. This first of two articlesmore » will describe the control system and its implementation. The second will outline the project's achievements, including reduced quality giveaway and increased profits. The paper describes background of the company and unit, the process, project implementation, the Infer model, model tuning, closed-loop control, feed rate maximization, and economic monitoring.« less

Deterioration of soil quality and pasture production linked to overgrazing in rangelands of Extremadura (SW Spain)

NASA Astrophysics Data System (ADS)

Pulido-Fernández, Manuel; Schnabel, Susanne; Francisco Lavado Contador, Joaquín; Lozano-Parra, Javier; González López, Francisco

2015-04-01

Soil degradation phenomena include water erosion and physical and biological processes have been already reported in rangelands of southwestern Spain. The increasing of the number of domestic animals since 1986 has been highlighted as one of the key causes. The main goal of this work is to analyze the effects of the excessive number of animals on soil quality and pasture production in privately-owned farms dedicated to extensive ranching. Soil properties, soil surface cover, erosion features, pasture production and composition, rainfall and land management variables such as livestock density were analyzed during a period of 3 years (2008-2011). The study was carried out in 22 fenced units belonging to 10 farms distributed throughout the Spanish region of Extremadura. The occurrence of bare soil patches, and consequently water erosion processes, as well as an increasing in the mean values of bulk density from 5 to 10 cm in depth were observed in the fenced units with animal stocking rates exceeding 1 AU ha-1 (AU: animal cattle equivalent unit). Some indications which may serve to confirm the negative effect of increased bulk density on pasture production and quality were also found.

Better compliance and better tolerance in relation to a well-conducted introduction to rub-in hand disinfection.

PubMed

Girard, R; Amazian, K; Fabry, J

2001-02-01

The aim of the study was to demonstrate that the introduction of rub-in hand disinfection (RHD) in hospital units, with the implementation of suitable equipment, drafting of specific protocols, and training users, improved compliance of hand disinfection and tolerance of user's hands. In four hospital units not previously using RHD an external investigator conducted two identical studies in order to measure the rate of compliance with, and the quality of, disinfection practices, [rate of adapted (i.e., appropriate) procedures, rate of correct (i.e., properly performed) procedures, rate of adapted and correct procedures carried out] and to assess the state of hands (clinical scores of dryness and irritation, measuring hydration with a corneometer). Between the two studies, the units were equipped with dispensers for RHD products and staff were trained. Compliance improved from 62.2 to 66.5%, quality was improved (rate of adapted procedures from 66.8% to 84.3%, P > or = 10(-6), rate of correct procedures from 11.1% to 28.9%, P > or = 10(-8), rate of adapted and correct procedures from 6.0 to 17.8%, P > or = 10(-8)). The tolerance was improved significantly (P > or = 10(-2)) for clinical dryness and irritation scores, although not significantly for measurements using a corneometer. This study shows the benefit of introducing RHD with a technical and educational accompaniment. Copyright 2001 The Hospital Infection Society.

Validation of a New Larval Rearing Unit for Aedes albopictus (Diptera: Culicidae) Mass Rearing

PubMed Central

Gilles, Jérémie R. L.; Bellini, Romeo

2014-01-01

The mosquito larval rearing unit developed at the Insect Pest Control Laboratory (IPCL) of the FAO/IAEA Joint Division was evaluated for its potential use for Aedes albopictus (Skuse, 1895) mass rearing in support of the development of a sterile insect technique (SIT) package for this species. The use of the mass rearing trays and rack did not adversely affect larval development, pupation and survival rates and allowed the management of large larval rearing colonies with reduced space requirements in comparison with classical individual trays. The effects of larval density, water temperature and diet composition on pupal production and size differentiation for sex separation efficacy were analyzed for individual mass rearing trays as well as multiple trays stacked within the dedicated rack unit. Best results were obtained using eighteen thousand larvae per tray at a density of 3 larvae per ml of deionized water at a temperature of 28°C on a diet consisting of 50% tuna meal, 36% bovine liver powder, 14% brewer's yeast and, as an additive, 0.2 gr of Vitamin Mix per 100 ml of diet solution. Pupae were harvested on the sixth day from larval introduction at L1 stage and males were separated out by the use of a 1400 µm sieve with 99.0% accuracy with a recovery rate of ca. 25% of the total available males. With the use of this larval rearing unit, an average production of 100,000 male pupae per week can be achieved in just 2 square meter of laboratory space. Compared to previous laboratory rearing method, the same pupal production and sex separation efficacy could only be achieved by use of ca. 200 plastic trays which required the space of two 5 square meter climatic-controlled rooms. PMID:24647347

Relationships between climate, radial growth and wood properties of mature loblolly pine in Hawaii and a northern and southern site in the southeastern United States

Treesearch

Lisa Samuelson; Thomas Eberhardt; Stan Bartkowiak; Kurt Johnsen

2013-01-01

Production rates of loblolly pine (Pinus taeda L.) in favorable exotic environments indicate that full biological expression of growth potential in loblolly pine has not yet been attained in its native range. In previous work, high productivity in a loblolly pine plantation in Hawaii (HI) was hypothesized to be related to a more favorable climate conducive to year...

EOQ model for perishable products with price-dependent demand, pre and post discounted selling price

NASA Astrophysics Data System (ADS)

Santhi, G.; Karthikeyan, K.

2017-11-01

In this article we introduce an economic order quantity model for perishable products like vegetables, fruits, milk, flowers, meat, etc.,with price-dependent demand, pre and post discounted selling price. Here we consider the demand is depending on selling price and deterioration rate is constant. Here we developed mathematical model to determine optimal discounton the unit selling price to maximize total profit. Numerical examples are given for illustrated.

Evaluating the utility of subjective effects measures for predicting product sampling, enrollment, and retention in a clinical trial of a smokeless tobacco product.

PubMed

O'Connor, Richard J; Lindgren, Bruce R; Schneller, Liane M; Shields, Peter G; Hatsukami, Dorothy K

2018-01-01

Subjective effects of drugs, representing pharmacological and non-pharmacological effects, have been shown to be associated with future use and abuse. This also is the case for tobacco products and so measuring subjective effects, such as liking, satisfaction, and aversion, is crucial to gaining an understanding of consumer perception leading to increased use. This study examined the predictive validity of subjective drug and product effects with respect to product adoption. Smokers (N=151) were enrolled in Minneapolis, Columbus, and Buffalo. Participants were shown two snus products (Camel Snus Winterchill and Robust), asked to try each of the products for 5min and to rate them using the Product Evaluation Scale (PES) and Drug Effects Questionnaire (DEQ). This was followed by a one-week use period of their preferred product and those who used at least 1 unit of Camel Snus per day (or at least 7 pouches total) were eligible to enroll in the Clinical Trial Phase assessing the impact of complete switching or dual use with smoking. Key outcomes for this study were product evaluation, extent of product use, and Clinical Trial enrollment. We noted no relationships between participant characteristics such as gender, age, prior smokeless use, baseline cigarettes per day (CPD), or PES and DEQ scores with any of these outcome variables. Subjective effects were weak predictors of product use, which totaled approximately 3units of snus per day. Regardless of product, it appears that PES and DEQ ratings were uniformly poor predictors of trial enrollment and retention, though they do predict the amount of snus used during the sampling phase. Findings indicate that while subjective effects predict product preference in the short-term, they did not consistently predict extent of use or enrollment in the trial, suggesting that these initial measures have limited implications for long-term behavior. Copyright © 2017. Published by Elsevier Ltd.

Projected Increase in Lightning Strikes in the United States Due to Global Warming

NASA Astrophysics Data System (ADS)

Romps, D. M.; Seeley, J.; Vollaro, D.; Molinari, J.

2014-12-01

Lightning plays an important role in atmospheric chemistry and in the initiation of wildfires, but the impact of global warming on lightning rates is poorly constrained. The lightning flash rate is proposed here to be proportional to the convective available potential energy (CAPE) times the precipitation rate. Using observations, the product of CAPE and precipitation is found to explain the majority of variance in the time series of total cloud-to-ground lightning flashes over the contiguous United States (CONUS) on timescales ranging from diurnal to seasonal. The observations reveal that storms convert the CAPE of water mass to discharged lightning energy with an efficiency of about 1%. This proxy can be applied to global climate models, which provide predictions for the increase in lightning due to global warming. Results from 11 GCMs will be shown.

Climate change. Projected increase in lightning strikes in the United States due to global warming.

PubMed

Romps, David M; Seeley, Jacob T; Vollaro, David; Molinari, John

2014-11-14

Lightning plays an important role in atmospheric chemistry and in the initiation of wildfires, but the impact of global warming on lightning rates is poorly constrained. Here we propose that the lightning flash rate is proportional to the convective available potential energy (CAPE) times the precipitation rate. Using observations, the product of CAPE and precipitation explains 77% of the variance in the time series of total cloud-to-ground lightning flashes over the contiguous United States (CONUS). Storms convert CAPE times precipitated water mass to discharged lightning energy with an efficiency of 1%. When this proxy is applied to 11 climate models, CONUS lightning strikes are predicted to increase 12 ± 5% per degree Celsius of global warming and about 50% over this century. Copyright © 2014, American Association for the Advancement of Science.

Worldwide orthopaedic research activity 2010-2014: Publication rates in the top 15 orthopaedic journals related to population size and gross domestic product.

PubMed

Hohmann, Erik; Glatt, Vaida; Tetsworth, Kevin

2017-06-18

To perform a bibliometric analysis of publications rates in orthopedics in the top 15 orthopaedic journals. Based on their 2015 impact factor, the fifteen highest ranked orthopaedic journals between January 2010 and December 2014 were used to establish the total number of publications; cumulative impact factor points (IF) per country were determined, and normalized to population size, GDP, and GDP/capita, comparison to the median country output and the global leader. Twenty-three thousand and twenty-one orthopaedic articles were published, with 66 countries publishing. The United States had 8149 publications, followed by the United Kingdom (1644) and Japan (1467). The highest IF was achieved by the United States (24744), United Kingdom (4776), and Japan (4053). Normalized by population size Switzerland lead. Normalized by GDP, Croatia was the top achiever. Adjusting GDP/capita, for publications and IF, China, India, and the United States were the leaders. Adjusting for population size and GDP, 28 countries achieved numbers of publications to be considered at least equivalent with the median academic output. Adjusting GDP/capita only China and India reached the number of publications to be considered equivalent to the current global leader, the United States. Five countries were responsible for 60% of the orthopaedic research output over this 5-year period. After correcting for GDP/capita, only 28 of 66 countries achieved a publication rate equivalent to the median country. The United States, United Kingdom, South Korea, Japan, and Germany were the top five countries for both publication totals and cumulative impact factor points.

Mapping Evapotranspiration Units in the Basin and Range Carbonate-Rock Aquifer System, White Pine County, Nevada, and Adjacent Areas in Nevada and Utah

USGS Publications Warehouse

Smith, J. LaRue; Laczniak, Randell J.; Moreo, Michael T.; Welborn, Toby L.

2007-01-01

Accurate estimates of ground-water discharge are crucial in the development of a water budget for the Basin and Range carbonate-rock aquifer system study area. One common method used throughout the southwestern United States is to estimate ground-water discharge from evapotranspiration (ET). ET is a process by which water from the Earth's surface is transferred to the atmosphere. The volume of water lost to the atmosphere by ET can be computed as the product of the ET rate and the acreage of vegetation, open water, and moist soil through which ET occurs. The procedure used in the study groups areas of similar vegetation, water, and soil conditions into different ET units, assigns an average annual ET rate to each unit, and computes annual ET from each ET unit within the outer extent of potential areas of ground-water discharge. Data sets and the procedures used to delineate the ET-unit map used to estimate ground-water discharge from the study area and a qualitative assessment of the accuracy of the map are described in this report.

Economic Cotton Production over Irrigation Rates in the Southeast United States

USDA-ARS?s Scientific Manuscript database

Regardless of location, water availability affects Cotton (Gossypium hirsutum L.) yield potential and economic stability. Irrigation is used in the Southeast U.S. to supplement rainfall on nearly 50% of cotton acres in Georgia. Rainfall often interferes with the efficiency of irrigation, adding to...

Economic cotton production over irrigation rates in the southeast United States

USDA-ARS?s Scientific Manuscript database

Regardless of location, water availability affects Cotton (Gossypium hirsutum L.) yield potential and economic stability. Irrigation is used in the Southeast U.S. to supplement rainfall on nearly 50% of cotton acres in Georgia. Rainfall often interferes with the efficiency of irrigation, adding to...

Improving fertility of dairy cattle using translational genomics

USDA-ARS?s Scientific Manuscript database

Selection for higher milk production in United States dairy cattle has been very successful during the past 50 years, however today’s lactating dairy cows exhibit a high incidence of subfertility and infertility with a national pregnancy rate of only 15%. An integrated approach to improve fertility ...

Herbicide Dissipation Studies in Southern Forest Ecosystems

Treesearch

Jerry L. Michael; Daniel G. Neary

1993-01-01

Results of research on the movement of bexazinone, imazapyr, picloram, and sulfometuron in first-order watersheds in the southern United States are presented. Herbicides contaminate surface waters to varying degrees, depending on application rate, method of application, product formulation, and site-spezific characteristics. Highest concentrations are observed in...

76 FR 53160 - Postal Service Rate Adjustment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-25

... Functionally Equivalent Agreement, August 12, 2011 (Notice). See also Docket Nos. MC2010-35, R2010-5 and R2010... Operators 1 product and two functionally equivalent agreements, Strategic Bilateral Agreement Between United...[egrave]s Service Agreement is functionally equivalent to the delivery confirmation service provided with...

AIDS in Nicaragua: epidemiological, political, and sociocultural perspectives.

PubMed

Low, N; Egger, M; Gorter, A; Sandiford, P; González, A; Pauw, J; Ferrie, J; Smith, G D

1993-01-01

The AIDS epidemic in Nicaragua is several years behind that in the United States and neighboring countries of Central and South America. A combination of events, including the isolation caused by the war of the U.S.-backed Contra army against the Sandinista government, the complete economic embargo imposed on Nicaragua by the United States in 1985, self-sufficiency for blood products, and a low rate of recreational injectable-drug use, have contributed to this situation. Since the Sandinistas were defeated in the general election of 1990, people have returned to Nicaragua from areas where HIV is more prevalent, such as Honduras and the United States. It is probable that many HIV-infected persons have now entered the country. Because of the high rates of sexually transmitted diseases and cultural factors such as "machismo," HIV is likely to spread rapidly by heterosexual transmission, unless effective, culturally appropriate education and sexually transmitted disease prevention programs are implemented now.

Investigation of a simplified artificial lighting programme to improve the fertility of sows in commercial piggeries.

PubMed

Tast, A; Hälli, O; Virolainen, J V; Oravainen, J; Heinonen, M; Peltoniemi, O A T

2005-05-28

Two artificial lighting regimens were studied in a commercial unit of 800 sows. The aim was to develop a simplified lighting regimen to overdrive the effects of season on reproduction. A long-day group had a constant 16 hours light and eight hours dark photoperiod in all units during a production cycle. A short-day group had eight hours of light and 16 hours darkness in a farrowing unit for four weeks and in a mating unit for four weeks. After one month of pregnancy the short-day group was transferred to 16 hours light and eight hours dark for the rest of the dry-sow period. Production data were collected for eight months, and the farrowing rate, weaning to oestrus interval, culling rate for fertility problems and the number of live-born piglets were analysed. Seasonal infertility, which had previously affected the herd, was not detected in either group during the follow-up period. The farrowing rate was 90 per cent for both groups. The median weaning to oestrus interval was five days in both lighting regimens with ranges from four to 74 days in the short-day group and three to 55 days in the long-day group. The long-day programme had a positive effect on the weaning to oestrus interval. When the sows were classified as either "normal", with a weaning to oestrus interval of up to 10 days, or "problem" animals, with a weaning to oestrus interval of over 10 days, the short-day programme also had a positive effect. The culling rate for fertility problems was 2.4 per cent for the short-day group and 3.2 per cent for the long-day group (P=0.027). The only significant predictor for the number of live-born piglets was parity (P=0.027).

Economic and life cycle assessments of biomass utilization for bioenergy products

DOE PAGES

Liu, Weiguo; Wang, Jingxin; Richard, Tom L.; ...

2017-05-04

A modeling process was developed to examine the economic and environmental benefits of utilizing energy crops for biofuels and bioproducts. Three energy crops (hybrid willow, switchgrass and miscanthus) that can potentially grow on marginal agricultural land or abandoned mine land in the northeastern United States were considered in the analytical process for the production of biofuels, biopower and pellet fuel. The supply chain components for both the economic analysis and life cycle modeling processes included feedstock establishment, harvest, transportation, storage, preprocessing, conversion, distribution and final usage. Sensitivity analysis was also conducted to assess the effects of energy crop yield, transportationmore » distance, conversion rate, facility capacity and internal rate of return (IRR) on the production of bioenergy products. The required selling price (RSP) ranged from $ 7.7/GJ to $ 47.9/GJ for different bioproducts. The production of biopower had the highest RSP and pellet fuel had the lowest. The results also indicated that bioenergy production using hybrid willow demonstrated lower RSP than the two perennial grass feedstocks. Pellet production presented the lowest greenhouse gas (GHG) emissions (less than 10 kg CO 2 eq per 1,000 MJ) and fossil energy consumption (less than 150 MJ per 1,000 MJ). The production of biofuel resulted in the highest GHG emissions. Sensitivity analysis indicated that IRR was the most sensitive factor to RSP and followed by conversion rate for biofuel and biopower production. As a result, conversion rate and transportation distance of feedstock presented a significant effect on environmental impacts during the production of the bioproducts.« less

Economic and life cycle assessments of biomass utilization for bioenergy products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Weiguo; Wang, Jingxin; Richard, Tom L.

A modeling process was developed to examine the economic and environmental benefits of utilizing energy crops for biofuels and bioproducts. Three energy crops (hybrid willow, switchgrass and miscanthus) that can potentially grow on marginal agricultural land or abandoned mine land in the northeastern United States were considered in the analytical process for the production of biofuels, biopower and pellet fuel. The supply chain components for both the economic analysis and life cycle modeling processes included feedstock establishment, harvest, transportation, storage, preprocessing, conversion, distribution and final usage. Sensitivity analysis was also conducted to assess the effects of energy crop yield, transportationmore » distance, conversion rate, facility capacity and internal rate of return (IRR) on the production of bioenergy products. The required selling price (RSP) ranged from $ 7.7/GJ to $ 47.9/GJ for different bioproducts. The production of biopower had the highest RSP and pellet fuel had the lowest. The results also indicated that bioenergy production using hybrid willow demonstrated lower RSP than the two perennial grass feedstocks. Pellet production presented the lowest greenhouse gas (GHG) emissions (less than 10 kg CO 2 eq per 1,000 MJ) and fossil energy consumption (less than 150 MJ per 1,000 MJ). The production of biofuel resulted in the highest GHG emissions. Sensitivity analysis indicated that IRR was the most sensitive factor to RSP and followed by conversion rate for biofuel and biopower production. As a result, conversion rate and transportation distance of feedstock presented a significant effect on environmental impacts during the production of the bioproducts.« less

Flight Control System Analysis and Design for a Remotely Piloted Vehicle with Thrust Vectoring Unit.

DTIC Science & Technology

1980-12-01

about the X-axis (slug-ft 2) Ixz Product of inertia (slug-ft 2 ) ly Moi,;ent of inertia about Y-axis (slug-ft 2) Iz Moment of inertia about Z-axis (slug...domain n Load factor (g’s) P Roll rate (rad/sec) xi p Perturbation roll rate (rad/sec) Q Pitch rate (rad/sec) q Perturbation pitch rate (rad/sec...was decided to employ a scale factor of 1.75 in increasing the vertical tail area. This choice was somewhat aruitrary since no documentation could be

14 CFR Appendix C to Part 187 - Fees for Production Certification-Related Services Performed Outside the United States

Code of Federal Regulations, 2011 CFR

2011-01-01

... consist of: personnel compensation and benefit (PC&B) for each participating FAA employee, actual travel...: W1H1+ W2H2 etc., + T + O Where: W1H1=hourly PC&B rate for employee 1, times estimated hours W2H2=hourly PC&B rate for employee 2, etc., times estimated hours T=estimated travel and transportation expenses...

14 CFR Appendix C to Part 187 - Fees for Production Certification-Related Services Performed Outside the United States

Code of Federal Regulations, 2010 CFR

2010-01-01

... consist of: personnel compensation and benefit (PC&B) for each participating FAA employee, actual travel...: W1H1+ W2H2 etc., + T + O Where: W1H1=hourly PC&B rate for employee 1, times estimated hours W2H2=hourly PC&B rate for employee 2, etc., times estimated hours T=estimated travel and transportation expenses...

Development of a new photocatalytic oxidation air filter for aircraft cabin.

PubMed

Ginestet, A; Pugnet, D; Rowley, J; Bull, K; Yeomans, H

2005-10-01

A new photocatalytic oxidation air filter (PCO unit) has been designed for aircraft cabin applications. The PCO unit is designed as a regenerable VOC removal system in order to improve the quality of the recirculated air entering the aircraft cabin. The PCO was designed to be a modular unit, with four UV lamps sandwiched between two interchangeable titanium dioxide coated panels. Performances of the PCO unit has been measured in a single pass mode test rig in order to show the ability of the unit to decrease the amount of VOCs (toluene, ethanol, and acetone) entering it (VOCs are fed separately), and in a multipass mode test rig in order to measure the ability of the unit to clean the air of an experimental room polluted with the same VOCs (fed separately). Triangular cell panels have been chosen instead of the wire mesh panels because they have higher efficiency. The efficiency of the PCO unit depends on the type of VOCs that challenges it, toluene being the most difficult one to oxidise. The efficiency of the PCO unit decreases when the air flow rate increases. The multipass mode test results show that the VOCs are oxidized but additional testing time would be necessary in order to show if they can be fully oxidized. The intermediate reaction products are mainly acetaldehyde and formaldehyde whose amount depends on the challenge VOC. The intermediate reaction products are also oxidized and additional testing time would be necessary in order to show if they can be fully oxidized. The development of this new photocatalytic air filter is still going on. The VOC/odor removing adsorbers are available for only a small proportion of aircraft currently in service. The photocatalytic oxidation (PCO) technique has appeared to be a promising solution to odors problems met in aircraft. This article reports the test results of a new photocatalytic oxidation air filter (PCO unit) designed for aircraft cabin applications. The overall efficiency of the PCO unit is function of the compound (toluene, ethanol, and acetone) that challenges the unit and toluene appears to be the most difficult compound to oxidize. Test results have shown the influence of the design of the PCO unit, the air flow rate and the type of UV on the efficiency of the PCO unit. The results obtained in this study represent a first attempt on the way to design a filter for VOC removal in cabin aircraft applications. The PCO technique used by the tested prototype unit is able to partially oxidized the challenge VOCs but one has to be aware that some harmful intermediate reaction products (mainly formaldehyde and acetaldehyde) are produced during the oxidation process before being partially oxidized too.

Minority donation in the United States: challenges and needs.

PubMed

Shaz, Beth H; Hillyer, Christopher D

2010-11-01

In the United States, blood donation rates of African-Americans are 25-50% of that of white individuals. As African-Americans make up an ever increasing and now substantial minority, and African-American recipients of blood transfusion, both specialized, such as sickle cell disease patients, and general hospitalized patients, have a better chance of receiving phenotype-matched or appropriate red blood cell units when there is a significant percentage of products in the inventory from African-American donors, it is important to understand the reason for the observed difference. Possible reasons for this discrepancy in donation rates include increased rates of donor deferral and ineligibility; increased barriers to donation, such as fear and distrust; and different marketing and education strategies. Thus, to increase the blood availability to African-American recipients, the reasons for these donation rate differences must be better understood and subsequently addressed through improved blood donor recruitment programs. The majority of African-American donor recruitment programs have focused on donating for sickle cell disease patients, particularly children, which have been of limited success. Significant improvements in African-American donor recruitment are needed to adequately meet the demand of African-American patients as well as the entire population.

Preliminary design and economic investigations of Diffuser-Augmented Wind Turbines (DAWT). Executive summary

NASA Astrophysics Data System (ADS)

Foreman, K. M.

1981-12-01

A preferred design and configuration approach for the diffuser augmented wind turbine (DAWT) innovative wind energy conversion system is suggested. A preliminary economic assessment is made for limited production rates of units between 5 and 150 kW rated outputs. Nine point designs are used to arrive at the conclusions regarding best construction material for the diffuser and busbar cost of electricity (COE). It is estimated that for farm and cooperative end users, the COE can range between 2 and 3.5 cents pr kWh for sites with annual average wind speeds of 16 and 12 mph (25.7 and 19.3 km/h) respectively, and 150 kW rated units. No tax credits are included in these COE figures. For commercial end users of these 150 kW units, the COE ranges between 4.0 and 6.5 cents per kWh for 16 and 12 mph sites. These estimates in 1971 dollars are lower than department of energy goals set in 1978 for the rating size and end applications. Recommendations are made for future activities to maintain steady, systematic progress toward mature development of the DAWT.

Disposable Electronic Cigarettes and Electronic Hookahs: Evaluation of Performance

PubMed Central

Williams, Monique; Ghai, Sanjay

2015-01-01

Introduction: The purpose of this study was to characterize the performance of disposable button-activated and disposable airflow-activated electronic cigarettes (EC) and electronic hookahs (EH). Methods: The airflow rate required to produce aerosol, pressure drop, and the aerosol absorbance at 420nm were measured during smoke-outs of 9 disposable products. Three units of each product were tested in these experiments. Results: The airflow rates required to produce aerosol and the aerosol absorbances were lower for button-activated models (3mL/s; 0.41–0.55 absorbance) than for airflow-activated models (7–17mL/s; 0.48–0.84 absorbance). Pressure drop was also lower across button-activated products (range = 6–12mm H2O) than airflow-activated products (range = 15–67mm H20). For 25 of 27 units tested, airflow did not have to be increased during smoke-out to maintain aerosol production, unlike earlier generation models. Two brands had uniform performance characteristics for all parameters, while 3 had at least 1 product that did not function normally. While button-activated models lasted 200 puffs or less and EH airflow-activated models often lasted 400 puffs, none of the models produced as many puffs as advertised. Puff number was limited by battery life, which was shorter in button-activated models. Conclusion: The performance of disposable products was differentiated mainly by the way the aerosol was produced (button vs airflow-activated) rather than by product type (EC vs EH). Users needed to take harder drags on airflow-activated models. Performance varied within models, and battery life limited the number of puffs. Data suggest quality control in manufacturing varies among brands. PMID:25104117

Are Alcohol Taxation and Pricing Policies Regressive? Product-Level Effects of a Specific Tax and a Minimum Unit Price for Alcohol.

PubMed

Vandenberg, Brian; Sharma, Anurag

2016-07-01

To compare estimated effects of two policy alternatives, (i) a minimum unit price (MUP) for alcohol and (ii) specific (per-unit) taxation, upon current product prices, per capita spending (A$), and per capita consumption by income quintile, consumption quintile and product type. Estimation of baseline spending and consumption, and modelling policy-to-price and price-to-consumption effects of policy changes using scanner data from a panel of demographically representative Australian households that includes product-level details of their off-trade alcohol spending (n = 885; total observations = 12,505). Robustness checks include alternative price elasticities, tax rates, minimum price thresholds and tax pass-through rates. Current alcohol taxes and alternative taxation and pricing policies are not highly regressive. Any regressive effects are small and concentrated among heavy consumers. The lowest-income consumers currently spend a larger proportion of income (2.3%) on alcohol taxes than the highest-income consumers (0.3%), but the mean amount is small in magnitude [A$5.50 per week (95%CI: 5.18-5.88)]. Both a MUP and specific taxation will have some regressive effects, but the effects are limited, as they are greatest for the heaviest consumers, irrespective of income. Among the policy alternatives, a MUP is more effective in reducing consumption than specific taxation, especially for consumers in the lowest-income quintile: an estimated mean per capita reduction of 11.9 standard drinks per week (95%CI: 11.3-12.6). Policies that increase the cost of the cheapest alcohol can be effective in reducing alcohol consumption, without having highly regressive effects. © The Author 2015. Medical Council on Alcohol and Oxford University Press. All rights reserved.

Ethanol synthesis and aerobic respiration in the laboratory by leader segments of Douglas-fir seedlings from winter and spring.

PubMed

Joseph, Gladwin; Kelsey, Rick G

2004-05-01

Stem segments from terminal leaders of Douglas-fir, Pseudotsuga menziesii (Mirb.) Franco, seedlings were sampled in mid-December when cambial cells were dormant. The residual, debudded leaders were resampled again in early May when the cambium was metabolically active. May stems had higher constitutive ethanol concentrations than December stems. This was not the result of cambial hypoxia generated by rapid spring respiration rates, because when aerobic respiration was stimulated by incubating the stems in air at 30 degrees C ethanol production was induced in December, but not in May. Rapid respiration rates at 30 degrees C may have depleted O(2) supplies and induced ethanol production in December stems because dormant, thick-walled cambial cells may be less permeable to CO(2) and O(2), compared with metabolically active, thin-walled cambial cells in May. December stem segments incubated in a N(2) atmosphere at 30 degrees C synthesized 1.8 times more ethanol than segments from May, most likely because spring growth had reduced the soluble sugars available for fermentation. CO(2) efflux from May stems (after 5.5 h of incubation at 30 degrees C) was equal to December stems per unit volume, but greater than December stems per unit surface area. N(2)-induced ethanol concentrations were positively related with CO(2) efflux per unit volume, indicating that rapidly respiring leaders can maintain rapid fermentation rates, provided soluble sugars are readily available. N(2)-induced ethanol and CO(2) efflux per unit volume declined with increasing leader diameter in both seasons, whereas there were no relationships between CO(2) efflux per unit surface area and diameter. Cambium physiology and phenology influence the induction of fermentation and concentrations of ethanol produced in terminal leaders of Douglas-fir, and probably other conifers as well. This needs to be considered when comparing fermentation among species, or comparing individuals from different seasons, or disparate ages within a species.

Promoting employee health by integrating health protection, health promotion, and continuous improvement: a longitudinal quasi-experimental intervention study.

PubMed

von Thiele Schwarz, Ulrica; Augustsson, Hanna; Hasson, Henna; Stenfors-Hayes, Terese

2015-02-01

To test the effects of integrating health protection and health promotion with a continuous improvement system (Kaizen) on proximal employee outcomes (health promotion, integration, and Kaizen) and distal outcomes (workability, productivity, self-rated health and self-rated sickness absence). Twelve units in a county hospital in Sweden were randomized to control or intervention groups using a quasiexperimental study design. All staff (approximately 500) provided self-ratings in questionnaires at baseline, and a 12- and 24-month follow-up (response rate, 79% to 87.5%). There was a significant increase in the proximal outcomes over time in the intervention group compared with the control group, and a trend toward improvement in the distal outcomes workability and productivity. Integration seems to promote staff engagement in health protection and promotion, as well as to improve their understanding of the link between work and health.

North Sea Emerald crude oil assayed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhodes, A.K.

1991-09-16

This book reports on an analysis of crude from Emerald field, 70 miles east of the Shetland Islands in the British North Sea, which shows that the crude is much heavier than typical North Sea crude. Elements of the long- delayed project appear to be in place, but production has not yet begun. Plans calls for producing the field at a rate of 30,000-40,000 b/d from a floating storage unit. Sovereign Oil and Gas plc has completed and fully tested seven production wells and four injectors in the marginal Emerald oil field. All flow lines are in place and themore » floating storage unit is ready to be installed. Production from Emerald will be sold to Neste Oy of Finland, at a minimum price of $17.90/bbl for Sullom Voe. Increases in spot prices above that level will be shared equally by the owners and purchaser.« less

76 FR 53981 - New Postal Product

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... Parcel Post (Air CP), Surface Parcel Post (Surface CP) and Express Mail Service (EMS) in the United States is functionally equivalent to the agreement to deliver inbound Air CP, Surface CP and EMS in the... competitive services in the China Post 2011 Agreement include rates for Air CP, Surface CP, and EMS, requires...

A New Standard for Measuring Doctoral Programs

ERIC Educational Resources Information Center

Fogg, Piper

2007-01-01

This article discusses a new standard for measuring graduate programs in the United States. The Faculty Scholarly Productivity Index, produced by Academic Analytics, a for-profit company, rates faculty members' scholarly output at nearly 7,300 doctoral programs around the country. It examines the number of book and journal articles published by…

15 CFR 2015.3 - Export certificates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Export certificates. 2015.3 Section... Export certificates. (a) To claim the in-quota rate of duty on sugar-containing products of a..., in the form and manner determined by the United States Customs Service, that a valid export...

Relationships between Watershed Alterations and Sediment Accretion Rates in Willapa Bay Washington and Yaquina Bay, Oregon

EPA Science Inventory

The Pacific Northwest (PNW) is one of the leading regions of timber production in the United States. It also undergoes aperiodic episodes of catastrophic forest fires, and systematic slash burns following logging activities. Such conditions raise concerns regarding increased re...

Forest Sustainability in the Northern United States

Treesearch

Sherri Wormstead

2006-01-01

Are populations of songbirds declining? Are we harvesting more timber than we grow? How healthy and productive are our forests? What will happen to our forests if current rates of development continue? How will forest fragmentation and loss impact water and air quality, recreation, and our country?s forest related economy?

Evaluation of sectrally-selective materials for multi-layer solar thermal crop drying (abstract)

USDA-ARS?s Scientific Manuscript database

Solar thermal (ST) drying is a ubiquitous method in widespread use for fruit and vegetable crop preservation in developing countries; however, it has had limited commercialization in the United States due to concerns about slow drying rates, poor product quality, and predicted low return-on-investme...

25 CFR 161.204 - How are carrying capacities and stocking rates established?

Code of Federal Regulations, 2010 CFR

2010-04-01

... be based on forage production, range utilization, the application of land management practices, and range improvements in place to achieve uniformity of grazing under sustained yield management principles... agricultural resource management plan and range unit management plan. (b) BIA, with the concurrence of the...

Radiogenic heat production in sedimentary rocks of the Gulf of Mexico Basin, south Texas

USGS Publications Warehouse

McKenna, T.E.; Sharp, J.M.

1998-01-01

Radiogenic heat production within the sedimentary section of the Gulf of Mexico basin is a significant source of heat. Radiogenic heat should be included in thermal models of this basin (and perhaps other sedimentary basins). We calculate that radiogenic heat may contribute up to 26% of the overall surface heat-flow density for an area in south Texas. Based on measurements of the radioactive decay rate of ??-particles, potassium concentration, and bulk density, we calculate radiogenic heat production for Stuart City (Lower Cretaceous) limestones, Wilcox (Eocene) sandstones and mudrocks, and Frio (Oligocene) sandstones and mudrocks from south Texas. Heat production rates range from a low of 0.07 ?? 0.01 ??W/m3 in clean Stuart City limestones to 2.21 ?? 0.24??W/m3 in Frio mudrocks. Mean heat production rates for Wilcox sandstones, Frio sandstones, Wilcox mudrocks, and Frio mudrocks are 0.88, 1.19, 1.50, and 1.72 ??W/m3, respectively. In general, the mudrocks produce about 30-40% more heat than stratigraphically equivalent sandstones. Frio rocks produce about 15% more heat than Wilcox rocks per unit volume of clastic rock (sandstone/mudrock). A one-dimensional heat-conduction model indicates that this radiogenic heat source has a significant effect on subsurface temperatures. If a thermal model were calibrated to observed temperatures by optimizing basal heat-flow density and ignoring sediment heat production, the extrapolated present-day temperature of a deeply buried source rock would be overestimated.Radiogenic heat production within the sedimentary section of the Gulf of Mexico basin is a significant source of heat. Radiogenic heat should be included in thermal models of this basin (and perhaps other sedimentary basins). We calculate that radiogenic heat may contribute up to 26% of the overall surface heat-flow density for an area in south Texas. Based on measurements of the radioactive decay rate of ??-particles, potassium concentration, and bulk density, we calculate radiogenic heat production for Stuart City (Lower Cretaceous) limestones, Wilcox (Eocene) sandstones and mudrocks, and Frio (Oligocene) sandstones and mudrocks from south Texas. Heat production rates range from a low of 0.07??0.01 ??W/m3 in clean Stuart City limestones to 2.21??0.24 ??W/m3 in Frio mudrocks. Mean heat production rates for Wilcox sandstones, Frio sandstones, Wilcox mudrocks, and Frio mudrocks are 0.88, 1.19, 1.50, and 1.72 ??W/m3, respectively. In general, the mudrocks produce about 30-40% more heat than stratigraphically equivalent sandstones. Frio rocks produce about 15% more heat than Wilcox rocks per unit volume of clastic rock (sandstone/mudrock). A one-dimensional heat-conduction model indicates that this radiogenic heat source has a significant effect on subsurface temperatures. If a thermal model were calibrated to observed temperatures by optimizing basal heat-flow density and ignoring sediment heat production, the extrapolated present-day temperature of a deeply buried source rock would be overestimated.

Sound quality evaluation of air conditioning sound rating metric

NASA Astrophysics Data System (ADS)

Hodgdon, Kathleen K.; Peters, Jonathan A.; Burkhardt, Russell C.; Atchley, Anthony A.; Blood, Ingrid M.

2003-10-01

A product's success can depend on its acoustic signature as much as on the product's performance. The consumer's perception can strongly influence their satisfaction with and confidence in the product. A metric that can rate the content of the spectrum, and predict its consumer preference, is a valuable tool for manufacturers. The current method of assessing acoustic signatures from residential air conditioning units is defined in the Air Conditioning and Refrigeration Institute (ARI 270) 1995 Standard for Sound Rating of Outdoor Unitary Equipment. The ARI 270 metric, and modified versions of that metric, were implemented in software with the flexibility to modify the features applied. Numerous product signatures were analyzed to generate a set of synthesized spectra that targeted spectral configurations that challenged the metric's abilities. A subjective jury evaluation was conducted to establish the consumer preference for those spectra. Statistical correlations were conducted to assess the degree of relationship between the subjective preferences and the various metric calculations. Recommendations were made for modifications to improve the current metric's ability to predict subjective preference. [Research supported by the Air Conditioning and Refrigeration Institute.

The critical role of extreme heat for maize production in the United States

NASA Astrophysics Data System (ADS)

Lobell, David B.; Hammer, Graeme L.; McLean, Greg; Messina, Carlos; Roberts, Michael J.; Schlenker, Wolfram

2013-05-01

Statistical studies of rainfed maize yields in the United States and elsewhere have indicated two clear features: a strong negative yield response to accumulation of temperatures above 30°C (or extreme degree days (EDD)), and a relatively weak response to seasonal rainfall. Here we show that the process-based Agricultural Production Systems Simulator (APSIM) is able to reproduce both of these relationships in the Midwestern United States and provide insight into underlying mechanisms. The predominant effects of EDD in APSIM are associated with increased vapour pressure deficit, which contributes to water stress in two ways: by increasing demand for soil water to sustain a given rate of carbon assimilation, and by reducing future supply of soil water by raising transpiration rates. APSIM computes daily water stress as the ratio of water supply to demand, and during the critical month of July this ratio is three times more responsive to 2°C warming than to a 20% precipitation reduction. The results suggest a relatively minor role for direct heat stress on reproductive organs at present temperatures in this region. Effects of elevated CO2 on transpiration efficiency should reduce yield sensitivity to EDD in the coming decades, but at most by 25%.

Hydrogen production econometric studies. [hydrogen and fossil fuels

NASA Technical Reports Server (NTRS)

Howell, J. R.; Bannerot, R. B.

1975-01-01

The current assessments of fossil fuel resources in the United States were examined, and predictions of the maximum and minimum lifetimes of recoverable resources according to these assessments are presented. In addition, current rates of production in quads/year for the fossil fuels were determined from the literature. Where possible, costs of energy, location of reserves, and remaining time before these reserves are exhausted are given. Limitations that appear to hinder complete development of each energy source are outlined.

Innovative self-powered submersible microbial electrolysis cell (SMEC) for biohydrogen production from anaerobic reactors.

PubMed

Zhang, Yifeng; Angelidaki, Irini

2012-05-15

A self-powered submersible microbial electrolysis cell (SMEC), in which a specially designed anode chamber and external electricity supply were not needed, was developed for in situ biohydrogen production from anaerobic reactors. In batch experiments, the hydrogen production rate reached 17.8 mL/L/d at the initial acetate concentration of 410 mg/L (5 mM), while the cathodic hydrogen recovery ( [Formula: see text] ) and overall systemic coulombic efficiency (CE(os)) were 93% and 28%, respectively, and the systemic hydrogen yield ( [Formula: see text] ) peaked at 1.27 mol-H(2)/mol-acetate. The hydrogen production increased along with acetate and buffer concentration. The highest hydrogen production rate of 32.2 mL/L/d and [Formula: see text] of 1.43 mol-H(2)/mol-acetate were achieved at 1640 mg/L (20 mM) acetate and 100 mM phosphate buffer. Further evaluation of the reactor under single electricity-generating or hydrogen-producing mode indicated that further improvement of voltage output and reduction of electron losses were essential for efficient hydrogen generation. In addition, alternate exchanging the electricity-assisting and hydrogen-producing function between the two cell units of the SMEC was found to be an effective approach to inhibit methanogens. Furthermore, 16S rRNA genes analysis showed that this special operation strategy resulted same microbial community structures in the anodic biofilms of the two cell units. The simple, compact and in situ applicable SMEC offers new opportunities for reactor design for a microbial electricity-assisted biohydrogen production system. Copyright © 2012 Elsevier Ltd. All rights reserved.

Blood transfusions in children: a multi-institutional analysis of practices and complications.

PubMed

Slonim, Anthony D; Joseph, Jill G; Turenne, Wendy M; Sharangpani, Aditi; Luban, Naomi L C

2008-01-01

Blood product transfusions are a valuable health-care resource. Guidelines for transfusion exist, but variability in their application, particularly in children, remains. The risk factors that threaten transfusion safety are well established, but because their occurrence in children is rare, single-institution studies have limited utility in determining the rates of occurrence. An epidemiologic approach that investigates blood transfusions in hospitalized children may help improve our understanding of transfused blood products in this vulnerable population. This was a nonconcurrent cohort study of pediatric patients not more than 18 years of age hospitalized from 2001 to 2003 at 35 academic children's hospitals that are members of the Pediatric Health Information System (PHIS). A total of 51,720 (4.8%) pediatric patients received blood product transfusions during the study period. Red blood cells (n = 44,632) and platelets (n = 14,274) were the two most frequently transfused products. The rate of transfusions was highest among children with neutropenia, agranulocytosis, and sickle cell crisis. Asian and American Indian patients had important differences in the rate of blood transfusions and their complications. Resource use in terms of length of stay and costs were higher in patients who received transfusion. Of those patients who received transfusions, 492 (0.95%) experienced a complication from the administered blood product. This accounted for a rate of complications of 10.7 per 1,000 units transfused. The administration of blood products to children is a common practice in academic children's hospitals. Complications associated with these transfused products are rare.

Evolutionary model of an anonymous consumer durable market

NASA Astrophysics Data System (ADS)

Kaldasch, Joachim

2011-07-01

An analytic model is presented that considers the evolution of a market of durable goods. The model suggests that after introduction goods spread always according to a Bass diffusion. However, this phase will be followed by a diffusion process for durable consumer goods governed by a variation-selection-reproduction mechanism and the growth dynamics can be described by a replicator equation. The theory suggests that products play the role of species in biological evolutionary models. It implies that the evolution of man-made products can be arranged into an evolutionary tree. The model suggests that each product can be characterized by its product fitness. The fitness space contains elements of both sites of the market, supply and demand. The unit sales of products with a higher product fitness compared to the mean fitness increase. Durables with a constant fitness advantage replace other goods according to a logistic law. The model predicts in particular that the mean price exhibits an exponential decrease over a long time period for durable goods. The evolutionary diffusion process is directly related to this price decline and is governed by Gompertz equation. Therefore it is denoted as Gompertz diffusion. Describing the aggregate sales as the sum of first, multiple and replacement purchase the product life cycle can be derived. Replacement purchase causes periodic variations of the sales determined by the finite lifetime of the good (Juglar cycles). The model suggests that both, Bass- and Gompertz diffusion may contribute to the product life cycle of a consumer durable. The theory contains the standard equilibrium view of a market as a special case. It depends on the time scale, whether an equilibrium or evolutionary description is more appropriate. The evolutionary framework is used to derive also the size, growth rate and price distribution of manufacturing business units. It predicts that the size distribution of the business units (products) is lognormal, while the growth rates exhibit a Laplace distribution. Large price deviations from the mean price are also governed by a Laplace distribution (fat tails). These results are in agreement with empirical findings. The explicit comparison of the time evolution of consumer durables with empirical investigations confirms the close relationship between price decline and Gompertz diffusion, while the product life cycle can be described qualitatively for a long time period.

A sensitive approach to family planning motivation in Malaysia.

PubMed

1978-01-01

The goals of the Malaysian Family Planning Program are not only to reduce population growth from 3% to 2% by 1985 and to bring the crude birth rate to 28.2 from 30.3, but to generally improve the health of the family, and to enhance the government's efforts to raise the per capita income. The work program is divided into the Creative Unit, the Media Unit, the Production Unit, and the Field Diffusion Unit. The objectives are to build up strong support from political, community, and opinion leaders, and to run educational campaigns aimed at motivating potential acceptors. The program also runs centers training medical and paramedical personnel. The program is combined with development programs for women, especially useful among the rural population.

NASA Symposium on Productivity and Quality: Strategies for Improving Operations in Government and Industry

NASA Technical Reports Server (NTRS)

1984-01-01

The purpose of the Symposium is to increase the awareness of productivity and quality issues in the United States, and to foster national initiatives through government and industry executive leadership. The Symposium will provide a forum for discussion of white-collar productivity issues by experienced executives from successful organizations and an opportunity to share information learned through Productivity initiatives in govemment, industry and academic organizations. It will focus on white-collar organizational issues that are common to large companies and technology oriented organizations. The Symposium program will include strategies for improving operations in government and industry and will be responsive to the management issues viewed necessary to increase our nation's productivity growth rate.

A Literature Review on Prevalence of Gender Differences and Intersections with Other Vulnerabilities to Tobacco Use in the United States, 2004–2014

PubMed Central

Higgins, Stephen T.; Kurti, Allison N.; Redner, Ryan; White, Thomas J.; Gaalema, Diann E.; Roberts, Megan E.; Doogan, Nathan J.; Tidey, Jennifer W.; Miller, Mollie E.; Stanton, Cassandra A.; Henningfield, Jack E.; Atwood, Gary S.

2015-01-01

This report describes results from a systematic literature review examining gender differences in U.S. prevalence rates of current use of tobacco and nicotine delivery products and how they intersect with other vulnerabilities to tobacco use. We searched PubMed on gender differences in tobacco use across the years 2004–2014. For inclusion, reports had to be in English, in a peer-reviewed journal or federal government report, report prevalence rates for current use of a tobacco product in males and females, and use a U.S. nationally representative sample. Prevalence rates were generally higher in males than females across all products. This pattern remained stable despite changes over time in overall prevalence rates. Gender differences generally were robust when intersecting with other vulnerabilities, although decreases in the magnitude of gender differences were noted among younger and older users, and among educational levels and race/ethnic groups associated with the highest or lowest prevalence rates. Overall, these results document a pervasive association of gender with vulnerability to tobacco use that acts additively with other vulnerabilities. These vulnerabilities should be considered whenever formulating tobacco control and regulatory policies. PMID:26123717

A Comparative Evaluation of the Effects of the Implementation of the Production Oriented Maintenance Organization (POMO) on Aircraft Maintenance

DTIC Science & Technology

1978-09-01

Division AREA & WORK UNIT NUMBERS School of Systems and Logistics’ Air Force Institute of Technology,WPAFB,OH II. CONTROLLING OFFICE NAME AND ADDRESS 12 ...STRUCTURE) ............. ................ 9) 12 . SUMMARY OF ALL ANALYSIS RESUILT,"S ........ ........ 94 vii i LIST OF FIGURES Figure Page 1. Deputy...ness Rate (Variable 4) .... ............ ... 81 12 . Graph of Data Values for Abort Rate (Variable 5 e) . ..................... 82 13. Graph of Data

Does culture affect divorce? evidence from European immigrants in the United States.

PubMed

Furtado, Delia; Marcén, Miriam; Sevilla, Almudena

2013-06-01

This article explores the role of culture in determining divorce by examining country-of-origin differences in divorce rates of immigrants in the United States. Because childhood-arriving immigrants are all exposed to a common set of U.S. laws and institutions, we interpret relationships between their divorce tendencies and home-country divorce rates as evidence of the effect of culture. Our results are robust to controlling for several home-country variables, including average church attendance and gross domestic product (GDP). Moreover, specifications with country-of-origin fixed effects suggest that immigrants from countries with low divorce rates are especially less likely to be divorced if they reside among a large number of coethnics. Supplemental analyses indicate that divorce culture has a stronger impact on the divorce decisions of females than of males, pointing to a potentially gendered nature of divorce taboos.

The RECALCAR Project. Healthcare in the Cardiology Units of the Spanish National Health System, 2011 to 2014.

PubMed

Íñiguez Romo, Andrés; Bertomeu Martínez, Vicente; Rodríguez Padial, Luis; Anguita Sánchez, Manuel; Ruiz Mateas, Francisco; Hidalgo Urbano, Rafael; Bernal Sobrino, José Luis; Fernández Pérez, Cristina; Macaya de Miguel, Carlos; Elola Somoza, Francisco Javier

2017-07-01

The RECALCAR project (Spanish acronym for Resources and Quality in Cardiology Units) uses 2 data sources: a survey of cardiology units and an analysis of the Minimum Basic Data set of all hospital discharges of the Spanish National Health System. From 2011 to 2014, there was marked stability in all indicators of the availability, utilization, and productivity of cardiology units. There was significant variability between units and between the health services of the autonomous communities. There was poor implementation of process management (only 14% of the units) and scarce development of health care networks (17%). Structured cardiology units tended to have better results, in terms of both quality and efficiency. No significant differences were found between the different types of unit in the mean length of stay (5.5±1.1 days) or the ratio between successive and first consultations (2:1). The mean discharge rate was 5/1000 inhabitants/y and the mean rate of initial consultations was 16±4/1000 inhabitants/y. No duty or on-call cardiologist was available in 30% of cardiology units with 24 or more beds; of these, no critical care beds were available in 45%. Our findings support the recommendation to regionalize cardiology care and to promote the development of cardiology unit networks. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

Estimating occupational illness, injury, and mortality in food production in the United States: A farm-to-table analysis

PubMed Central

Leon, Juan S.; Newman, Lee S.

2015-01-01

Objectives The study provides a novel model and more comprehensive estimates of the burden of occupational morbidity and mortality in food-related industries, using a farm-to-table approach. Methods The authors analyzed 2008–2010 US Bureau of Labor Statistics data for private industries in the different stages of the farm-to-table model (production; processing; distribution and storage; retail and preparation). Results The morbidity rate for food system industries were significantly higher than the morbidity rate for non-food system industries (Rate Ratio (RR)=1.62, 95% Confidence Interval (CI): 1.30–2.01). Furthermore, the occupational mortality rate for food system industries was significantly higher than the national non-food occupational mortality rate (RR=9.51, 95% CI: 2.47–36.58). Conclusions This is the first use of the farm-to-table model to assess occupational morbidity and mortality, and these findings highlighting specific workplace hazards across food system industries. PMID:25970031

Worldwide orthopaedic research activity 2010-2014: Publication rates in the top 15 orthopaedic journals related to population size and gross domestic product

PubMed Central

Hohmann, Erik; Glatt, Vaida; Tetsworth, Kevin

2017-01-01

AIM To perform a bibliometric analysis of publications rates in orthopedics in the top 15 orthopaedic journals. METHODS Based on their 2015 impact factor, the fifteen highest ranked orthopaedic journals between January 2010 and December 2014 were used to establish the total number of publications; cumulative impact factor points (IF) per country were determined, and normalized to population size, GDP, and GDP/capita, comparison to the median country output and the global leader. RESULTS Twenty-three thousand and twenty-one orthopaedic articles were published, with 66 countries publishing. The United States had 8149 publications, followed by the United Kingdom (1644) and Japan (1467). The highest IF was achieved by the United States (24744), United Kingdom (4776), and Japan (4053). Normalized by population size Switzerland lead. Normalized by GDP, Croatia was the top achiever. Adjusting GDP/capita, for publications and IF, China, India, and the United States were the leaders. Adjusting for population size and GDP, 28 countries achieved numbers of publications to be considered at least equivalent with the median academic output. Adjusting GDP/capita only China and India reached the number of publications to be considered equivalent to the current global leader, the United States. CONCLUSION Five countries were responsible for 60% of the orthopaedic research output over this 5-year period. After correcting for GDP/capita, only 28 of 66 countries achieved a publication rate equivalent to the median country. The United States, United Kingdom, South Korea, Japan, and Germany were the top five countries for both publication totals and cumulative impact factor points. PMID:28660144

Quantifying Physician Teaching Productivity Using Clinical Relative Value Units

PubMed Central

Yeh, Michael M; Cahill, Daniel F

1999-01-01

OBJECTIVE To design and test a customizable system for calculating physician teaching productivity based on clinical relative value units (RVUs). SETTING/PARTICIPANTS A 550-bed community teaching hospital with 11 part-time faculty general internists. DESIGN Academic year 1997–98 educational activities were analyzed with an RVU-based system using teaching value multipliers (TVMs). The TVM is the ratio of the value of a unit of time spent teaching to the equivalent time spent in clinical practice. We assigned TVMs to teaching tasks based on their educational value and complexity. The RVUs of a teaching activity would be equal to its TVM multiplied by its duration and by the regional median clinical RVU production rate. MEASUREMENTS The faculty members' total annual RVUs for teaching were calculated and compared with the RVUs they would have earned had they spent the same proportion of time in clinical practice. MAIN RESULTS For the same proportion of time, the faculty physicians would have generated 29,806 RVUs through teaching or 27,137 RVUs through clinical practice (Absolute difference = 2,669 RVUs; Relative excess = 9.8%). CONCLUSIONS We describe an easily customizable method of quantifying physician teaching productivity in terms of clinical RVUs. This system allows equitable recognition of physician efforts in both the educational and clinical arenas. PMID:10571707

[Drug-facilitated crimes: prospective data collection in a forensic unit in Paris].

PubMed

Questel, Franck; Sec, Isabelle; Sicot, Romain; Pourriat, Jean-Louis

2009-01-01

Little is known about the rate of crimes that are facilitated by the administration of psychoactive products without the victim's knowledge. This study analyzes the cases collected over a two-year period in a forensic unit in Paris. The study covers the period from January 1, 2005 and December /31, 2006. It includes crime victims who consulted for toxicological testing in the forensic unit of the Hôtel Dieu in Paris, after filing a criminal complaint describing symptoms suggestive of chemical submission (amnesia, impaired vigilance or behavior) and whose toxicological tests indicated the presence of a psychoactive product that they had not been aware of taking. The tests used chromatographic techniques on blood, urine, hair, and food or drink residue. Toxicological testing identified 52 cases of drug-facilitated crimes, primarily for theft and sexual abuse (including rape). The psychoactive products were most often incorporated in drinks, half of them alcoholic beverages. Benzodiazepines accounted for 77% of the cases. Other substances, found more rarely, included antihistamines, neuroleptics, and GHB. Appropriate samples must be taken from victims rapidly to enable toxicological analysis. Chromatographic analysis must supplement immunological analysis, which is not sufficiently specific or sensitive. The collection of this information must continue in order to quantify the phenomenon and monitor the emergence of new products.

Fine-tuning key parameters of an integrated reactor system for the simultaneous removal of COD, sulfate and ammonium and elemental sulfur reclamation.

PubMed

Yuan, Ye; Chen, Chuan; Liang, Bin; Huang, Cong; Zhao, Youkang; Xu, Xijun; Tan, Wenbo; Zhou, Xu; Gao, Shuang; Sun, Dezhi; Lee, Duujong; Zhou, Jizhong; Wang, Aijie

2014-03-30

In this paper, we proposed an integrated reactor system for simultaneous removal of COD, sulfate and ammonium (integrated C-S-N removal system) and investigated the key parameters of the system for a high level of elemental sulfur (S(0)) production. The system consisted of 4 main units: sulfate reduction and organic carbon removal (SR-CR), autotrophic and heterotrophic denitrifying sulfide removal (A&H-DSR), sulfur reclamation (SR), and aerated filter for aerobic nitrification (AN). In the system, the effects of key operational parameters on production of elemental sulfur were investigated, including hydraulic retention time (HRT) of each unit, sulfide/nitrate (S(2-)-S/NO3(-)-N) ratios, reflux ratios between the A&H-DSR and AN units, and loading rates of chemical oxygen demand (COD), sulfate and ammonium. Physico-chemical characteristics of biosulfur were studied for acquiring efficient S(0) recovery. The experiments successfully explored the optimum parameters for each unit and demonstrated 98% COD, 98% sulfate and 78% nitrogen removal efficiency. The optimum HRTs for SR-CR, A&H-DSR and AN were 12h, 3h and 3h, respectively. The reflux ratio of 3 could provide adequate S(2-)-S/NO3(-)-N ratio (approximately 1:1) to the A&H-DSR unit for obtaining maximum sulfur production. In this system, the maximum production of S(0) reached 90%, but only 60% S(0) was reclaimed from effluent. The S(0) that adhered to the outer layer of granules was deposited in the bottom of the A&H-DSR unit. Finally, the microbial community structure of the corresponding unit at different operational stage were analyzed by 16S rRNA gene based high throughput Illumina MiSeq sequencing and the potential function of dominant species were discussed. Copyright © 2013 Elsevier B.V. All rights reserved.

Towards Sustainable H2 Production: Rational Design of Hydrophobic Triphenylamine-based Dyes for Sensitized Ethanol Photoreforming.

PubMed

Dessì, Alessio; Monai, Matteo; Bessi, Matteo; Montini, Tiziano; Calamante, Massimo; Mordini, Alessandro; Reginato, Gianna; Trono, Cosimo; Fornasiero, Paolo; Zani, Lorenzo

2018-02-22

Donor-acceptor dyes are a well-established class of photosensitizers, used to enhance visible-light harvesting in solar cells and in direct photocatalytic reactions, such as H 2 production by photoreforming of sacrificial electron donors (SEDs). Amines-typically triethanolamine (TEOA)-are commonly employed as SEDs in such reactions. Dye-sensitized photoreforming of more sustainable, biomass-derived alcohols, on the other hand, was only recently reported by using methanol as the electron donor. In this work, several rationally designed donor-acceptor dyes were used as sensitizers in H 2 photocatalytic production, comparing the efficiency of TEOA and EtOH as SEDs. In particular, the effect of hydrophobic chains in the spacer and/or the donor unit of the dyes was systematically studied. The H 2 production rates were higher when TEOA was used as SED, whereas the activity trends depended on the SED used. The best performance was obtained with TEOA by using a sensitizer with just one bulky hydrophobic moiety, propylenedioxythiophene, placed on the spacer unit. In the case of EtOH, the best-performing sensitizers were the ones featuring a thiazolo[5,4-d]thiazole internal unit, needed for enhancing light harvesting, and carrying alkyl chains on both the donor part and the spacer unit. The results are discussed in terms of reaction mechanism, interaction with the SED, and structural/electrochemical properties of the sensitizers. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

An Extended EPQ-Based Problem with a Discontinuous Delivery Policy, Scrap Rate, and Random Breakdown

PubMed Central

Song, Ming-Syuan; Chen, Hsin-Mei; Chiu, Yuan-Shyi P.

2015-01-01

In real supply chain environments, the discontinuous multidelivery policy is often used when finished products need to be transported to retailers or customers outside the production units. To address this real-life production-shipment situation, this study extends recent work using an economic production quantity- (EPQ-) based inventory model with a continuous inventory issuing policy, defective items, and machine breakdown by incorporating a multiple delivery policy into the model to replace the continuous policy and investigates the effect on the optimal run time decision for this specific EPQ model. Next, we further expand the scope of the problem to combine the retailer's stock holding cost into our study. This enhanced EPQ-based model can be used to reflect the situation found in contemporary manufacturing firms in which finished products are delivered to the producer's own retail stores and stocked there for sale. A second model is developed and studied. With the help of mathematical modeling and optimization techniques, the optimal run times that minimize the expected total system costs comprising costs incurred in production units, transportation, and retail stores are derived, for both models. Numerical examples are provided to demonstrate the applicability of our research results. PMID:25821853

An extended EPQ-based problem with a discontinuous delivery policy, scrap rate, and random breakdown.

PubMed

Chiu, Singa Wang; Lin, Hong-Dar; Song, Ming-Syuan; Chen, Hsin-Mei; Chiu, Yuan-Shyi P

2015-01-01

In real supply chain environments, the discontinuous multidelivery policy is often used when finished products need to be transported to retailers or customers outside the production units. To address this real-life production-shipment situation, this study extends recent work using an economic production quantity- (EPQ-) based inventory model with a continuous inventory issuing policy, defective items, and machine breakdown by incorporating a multiple delivery policy into the model to replace the continuous policy and investigates the effect on the optimal run time decision for this specific EPQ model. Next, we further expand the scope of the problem to combine the retailer's stock holding cost into our study. This enhanced EPQ-based model can be used to reflect the situation found in contemporary manufacturing firms in which finished products are delivered to the producer's own retail stores and stocked there for sale. A second model is developed and studied. With the help of mathematical modeling and optimization techniques, the optimal run times that minimize the expected total system costs comprising costs incurred in production units, transportation, and retail stores are derived, for both models. Numerical examples are provided to demonstrate the applicability of our research results.

Evidence of regional subsidence and associated interior wetland loss induced by hydrocarbon production, Gulf Coast region, USA

USGS Publications Warehouse

Morton, R.A.; Bernier, J.C.; Barras, J.A.

2006-01-01

Analysis of remote images, elevation surveys, stratigraphic cross-sections, and hydrocarbon production data demonstrates that extensive areas of wetland loss in the northern Gulf Coast region of the United States were associated with large-volume fluid production from mature petroleum fields. Interior wetland losses at many sites in coastal Louisiana and Texas are attributed largely to accelerated land subsidence and fault reactivation induced by decreased reservoir pressures as a result of rapid or prolonged extraction of gas, oil, and associated brines. Evidence that moderately-deep hydrocarbon production has induced land-surface subsidence and reactivated faults that intersect the surface include: (1) close temporal and spatial correlation of fluid production with surficial changes including rapid subsidence of wetland sediments near producing fields, (2) measurable offsets of shallow strata across the zones of wetland loss, (3) large reductions in subsurface pressures where subsidence rates are high, (4) coincidence of orientation and direction of displacement between surface fault traces and faults that bound the reservoirs, and (5) accelerated subsidence rates near producing fields compared to subsidence rates in surrounding areas or compared to geological rates of subsidence. Based on historical trends, subsidence rates in the Gulf Coast region near producing fields most likely will decrease in the future because most petroleum fields are nearly depleted. Alternatively, continued extraction of conventional energy resources as well as potential production of alternative energy resources (geopressured-geothermal fluids) in the Gulf Coast region could increase subsidence and land losses and also contribute to inundation of areas of higher elevation. ?? Springer-Verlag 2006.

Learning and forgetting in the jet fighter aircraft industry.

PubMed

Bongers, Anelí

2017-01-01

A recent strategy carried out by the aircraft industry to reduce the total cost of the new generation fighters has consisted in the development of a single airframe with different technical and operational specifications. This strategy has been designed to reduce costs in the Research, Design and Development phase with the ultimate objective of reducing the final unit price per aircraft. This is the case of the F-35 Lightning II, where three versions, with significant differences among them, are produced simultaneously based on a single airframe. Whereas this strategy seems to be useful to cut down pre-production sunk costs, their effects on production costs remain to be studied. This paper shows that this strategy can imply larger costs in the production phase by reducing learning acquisition and hence, the total effect on the final unit price of the aircraft is indeterminate. Learning curves are estimated based on the flyaway cost for the latest three fighter aircraft models: The A/F-18E/F Super Hornet, the F-22A Raptor, and the F-35A Lightning II. We find that learning rates for the F-35A are significantly lower (an estimated learning rate of around 9%) than for the other two models (around 14%).

Learning and forgetting in the jet fighter aircraft industry

PubMed Central

2017-01-01

A recent strategy carried out by the aircraft industry to reduce the total cost of the new generation fighters has consisted in the development of a single airframe with different technical and operational specifications. This strategy has been designed to reduce costs in the Research, Design and Development phase with the ultimate objective of reducing the final unit price per aircraft. This is the case of the F-35 Lightning II, where three versions, with significant differences among them, are produced simultaneously based on a single airframe. Whereas this strategy seems to be useful to cut down pre-production sunk costs, their effects on production costs remain to be studied. This paper shows that this strategy can imply larger costs in the production phase by reducing learning acquisition and hence, the total effect on the final unit price of the aircraft is indeterminate. Learning curves are estimated based on the flyaway cost for the latest three fighter aircraft models: The A/F-18E/F Super Hornet, the F-22A Raptor, and the F-35A Lightning II. We find that learning rates for the F-35A are significantly lower (an estimated learning rate of around 9%) than for the other two models (around 14%). PMID:28957359

Increasing Military Physician Productivity in a Managed Care Environment

DTIC Science & Technology

1992-07-13

allows us to obtain to a common denominator, or one single rating even though the services are dissimilar and the input units are not "weighted." Serway ...many ideas as possible to catalyze the process. In removing barriers to productivity in the work environment, a thorough analysis of the physical ...physician and the organization has increased. The whole text of the book "Doctor’s Decisions and the Cost of Medical Care" is dedicated to this concept

Evaluating Opportunities for Improved Processes and Flow Rates in Royal Saudi Air Force F-15 Reparable Items Supply Chain

DTIC Science & Technology

2015-09-15

of manpower to the focal company’s development and product commercialization process, availability of products in times of shortage , and/or...their employees to help improvements teams, by notifying them about any shortage or problems in the process, rather than blaming employees for...cargo services are used in air-shipping those parts to the United States. Then, parts are consolidated by the FF in the Wilmington warehouse , and

76 FR 53982 - New Postal Product and Rate Adjustment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... Koninklijke TNT Post BV and TNT Post Pakketservice Benelux BV (TNT Agreement) and the China Post Group--United... Post 2011 Agreement is similar to the China Post 2010 Agreement, TNT Agreement, and the HongKong Post..., TNT and HongKong Post Agreements and contains the same attributes and methodology. Id. at 8-10. It...

Neural Representations Used by Brain Regions Underlying Speech Production

ERIC Educational Resources Information Center

Segawa, Jennifer Anne

2013-01-01

Speech utterances are phoneme sequences but may not always be represented as such in the brain. For instance, electropalatography evidence indicates that as speaking rate increases, gestures within syllables are manipulated separately but those within consonant clusters act as one motor unit. Moreover, speech error data suggest that a syllable's…

Manufacturing Methods and Techniques for Miniature High Voltage Hybrid Multiplier Modules

DTIC Science & Technology

1977-05-06

technologies and materials,, and to demonstrate the production line capability to fabricate at the rate of 125 acceptable units per 40 hour week. - iv...Miraloma Avenue Anaheim, CA 92803 Dr. Andrew Tlcki1 Nitron Cornoratlon 10420 Bubb Road Cunertino, CA 95014 S I Commander RAt)C * ATTN: RBRII/Mr. J. Brauer

Mod-2 wind turbine system concept and preliminary design report. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1979-01-01

The configuration development of the MOD-2 wind turbine system is presented. The MOD-2 is design optimized for commercial production rates which, in multi-unit installations, will be integrated into a utility power grid and achieve a cost of electricity at less than 4 cents per kilowatt hour.

Sustaining the productivity of planted forests

Treesearch

R.F. Powers; A.E. Tiarks; J.A. Burger; M.C. Carter

1996-01-01

Conversion of natural forests to plantations, particularly in the tropics, has drawn global attention and concern. Moreover, plantation forestry is on the rise, especially in tropical and subtropical regions where growth rates are rapid. Even in the United States, where even-age silviculture is being deemphasized on public land (only about 15 percent of all plantings...

Where Money Mattered: Organizational and Economic Consequences of State Public School Expenditures in the United States: 1880-1940.

ERIC Educational Resources Information Center

Balfanz, Robert

1997-01-01

Uses historical, state-level schooling data, manufacturing productivity measures, and quantitative research to examine relationships between changes in rate and distribution of public school expenditures, public schooling organization, and state-level economic growth from 1880-1940. Significant effects for per-student spending on school…

Faculty Research Productivity 1972-1988: Development and Application of Constant Units of Measure.

ERIC Educational Resources Information Center

Bieber, Jeffery P.; Blackburn, Robert T.

1993-01-01

This study investigated changes in publishing opportunities by college/university faculty between 1972 and 1988 in three disciplines: biology, philosophy, and English. Changes in amount of publishing space available and numbers of individuals competing for that space indicated inflation rates for all three fields (especially biology) requiring…

The impact of discount rate and price on intertemporal groundwater models in southwest Kansas

USDA-ARS?s Scientific Manuscript database

Agriculture plays a vital role in the growth and development of the High Plains Region of the United States. With the development and adoption of irrigation technology, this region was transformed into one of the most agriculturally productive regions in the world [1]. The primary source of irrigati...

The potential economic burden of Zika in the continental United States.

PubMed

Lee, Bruce Y; Alfaro-Murillo, Jorge A; Parpia, Alyssa S; Asti, Lindsey; Wedlock, Patrick T; Hotez, Peter J; Galvani, Alison P

2017-04-01

As the Zika virus epidemic continues to spread internationally, countries such as the United States must determine how much to invest in prevention, control, and response. Fundamental to these decisions is quantifying the potential economic burden of Zika under different scenarios. To inform such decision making, our team developed a computational model to forecast the potential economic burden of Zika across six states in the US (Alabama, Florida, Georgia, Louisiana, Mississippi, and Texas) which are at greatest risk of Zika emergence, under a wide range of attack rates, scenarios and circumstances. In order to accommodate a wide range of possibilities, different scenarios explored the effects of varying the attack rate from 0.01% to 10%. Across the six states, an attack rate of 0.01% is estimated to cost $183.4 million to society ($117.1 million in direct medical costs and $66.3 million in productivity losses), 0.025% would result in $198.6 million ($119.4 million and $79.2 million), 0.10% would result in $274.6 million ($130.8 million and $143.8 million) and 1% would result in $1.2 billion ($268.0 million and $919.2 million). Our model and study show how direct medical costs, Medicaid costs, productivity losses, and total costs to society may vary with different attack rates across the six states and the circumstances at which they may exceed certain thresholds (e.g., Zika prevention and control funding allocations that are being debated by the US government). A Zika attack rate of 0.3% across the six states at greatest risk of Zika infection, would result in total costs that exceed $0.5 billion, an attack rate of 1% would exceed $1 billion, and an attack rate of 2% would exceed $2 billion.

Automated Decisional Model for Optimum Economic Order Quantity Determination Using Price Regressive Rates

NASA Astrophysics Data System (ADS)

Roşu, M. M.; Tarbă, C. I.; Neagu, C.

2016-11-01

The current models for inventory management are complementary, but together they offer a large pallet of elements for solving complex problems of companies when wanting to establish the optimum economic order quantity for unfinished products, row of materials, goods etc. The main objective of this paper is to elaborate an automated decisional model for the calculus of the economic order quantity taking into account the price regressive rates for the total order quantity. This model has two main objectives: first, to determine the periodicity when to be done the order n or the quantity order q; second, to determine the levels of stock: lighting control, security stock etc. In this way we can provide the answer to two fundamental questions: How much must be ordered? When to Order? In the current practice, the business relationships with its suppliers are based on regressive rates for price. This means that suppliers may grant discounts, from a certain level of quantities ordered. Thus, the unit price of the products is a variable which depends on the order size. So, the most important element for choosing the optimum for the economic order quantity is the total cost for ordering and this cost depends on the following elements: the medium price per units, the stock cost, the ordering cost etc.

USE OF COAL DRYING TO REDUCE WATER CONSUMED IN PULVERIZED COAL POWER PLANTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edward Levy; Nenad Sarunac; Harun Bilirgen

2005-04-01

This is the ninth Quarterly Report for this project. The background and technical justification for the project are described, including potential benefits of reducing fuel moisture using power plant waste heat, prior to firing the coal in a pulverized coal boiler. During this last Quarter, comparative analyses were performed for lignite and PRB coals to determine how unit performance varies with coal product moisture. Results are given showing how the coal product moisture level and coal rank affect parameters such as boiler efficiency, station service power needed for fans and pulverizers and net unit heat rate. Results are also givenmore » for the effects of coal drying on cooling tower makeup water and comparisons are made between makeup water savings for various times of the year.« less

Germanium recycling in the United States in 2000

USGS Publications Warehouse

Jorgenson, John D.

2006-01-01

This report describes the recycling flow of germanium in the United States in 2000, as well as other germanium material flow streams. Germanium was recycled mostly from new scrap that was generated during the manufacture of germanium-containing fiber optic cables and from new and old scrap products of germanium-containing infrared imaging devices. In 2000, about 11.5 metric tons of germanium was recycled, about 40 percent of which was derived from old scrap. The germanium recycling rate was estimated to be 50 percent, and germanium scrap recycling efficiency, 76 percent.

Tantalum recycling in the United States in 1998

USGS Publications Warehouse

Cunningham, Larry D.

2001-01-01

This report describes the flow of tantalum in the United States in 1998 with emphasis on the extent to which tantalum was recycled/reused. Tantalum was mostly recycled from new scrap that was generated during the manufacture of tantalum-related electronic components and new and old scrap products of tantalum-containing cemented carbides and superalloys. In 1998, about 210 metric tons of tantalum was recycled/reused, with about 43% derived from old scrap. The tantalum recycling rate was calculated to be 21%, and tantalum scrap recycling efficiency, 35%.

Modeling earthquake rate changes in Oklahoma and Arkansas: possible signatures of induced seismicity

USGS Publications Warehouse

Llenos, Andrea L.; Michael, Andrew J.

2013-01-01

The rate of ML≥3 earthquakes in the central and eastern United States increased beginning in 2009, particularly in Oklahoma and central Arkansas, where fluid injection has occurred. We find evidence that suggests these rate increases are man‐made by examining the rate changes in a catalog of ML≥3 earthquakes in Oklahoma, which had a low background seismicity rate before 2009, as well as rate changes in a catalog of ML≥2.2 earthquakes in central Arkansas, which had a history of earthquake swarms prior to the start of injection in 2009. In both cases, stochastic epidemic‐type aftershock sequence models and statistical tests demonstrate that the earthquake rate change is statistically significant, and both the background rate of independent earthquakes and the aftershock productivity must increase in 2009 to explain the observed increase in seismicity. This suggests that a significant change in the underlying triggering process occurred. Both parameters vary, even when comparing natural to potentially induced swarms in Arkansas, which suggests that changes in both the background rate and the aftershock productivity may provide a way to distinguish man‐made from natural earthquake rate changes. In Arkansas we also compare earthquake and injection well locations, finding that earthquakes within 6 km of an active injection well tend to occur closer together than those that occur before, after, or far from active injection. Thus, like a change in productivity, a change in interevent distance distribution may also be an indicator of induced seismicity.

Effects of nitrogen fertilisation rate and maturity of grass silage on methane emission by lactating dairy cows.

PubMed

Warner, D; Hatew, B; Podesta, S C; Klop, G; van Gastelen, S; van Laar, H; Dijkstra, J; Bannink, A

2016-01-01

Grass silage is typically fed to dairy cows in temperate regions. However, in vivo information on methane (CH(4)) emission from grass silage of varying quality is limited. We evaluated the effect of two rates of nitrogen (N) fertilisation of grassland (low fertilisation (LF), 65 kg of N/ha; and high fertilisation (HF), 150 kg of N/ha) and of three stages of maturity of grass at cutting: early maturity (EM; 28 days of regrowth), mid maturity (MM; 41 days of regrowth) and late maturity (LM; 62 days of regrowth) on CH(4) production by lactating dairy cows. In a randomised block design, 54 lactating Holstein-Friesian dairy cows (168±11 days in milk; mean±standard error of mean) received grass silage (mainly ryegrass) and compound feed at 80 : 20 on dry matter basis. Cows were adapted to the diet for 12 days and CH(4) production was measured in climate respiration chambers for 5 days. Dry matter intake (DMI; 14.9±0.56 kg/day) decreased with increasing N fertilisation and grass maturity. Production of fat- and protein-corrected milk (FPCM; 24.0±1.57 kg/day) decreased with advancing grass maturity but was not affected by N fertilisation. Apparent total-tract feed digestibility decreased with advancing grass maturity but was unaffected by N fertilisation except for an increase and decrease in N and fat digestibility with increasing N fertilisation, respectively. Total CH(4) production per cow (347±13.6 g/day) decreased with increasing N fertilisation by 4% and grass maturity by 6%. The smaller CH(4) production with advancing grass maturity was offset by a smaller FPCM and lower feed digestibility. As a result, with advancing grass maturity CH(4) emission intensity increased per units of FPCM (15.0±1.00 g CH(4)/kg) by 31% and digestible organic matter intake (33.1±0.78 g CH(4)/kg) by 15%. In addition, emission intensity increased per units of DMI (23.5±0.43 g CH(4)/kg) by 7% and gross energy intake (7.0±0.14% CH(4)) by 9%, implying an increased loss of dietary energy with advancing grass maturity. Rate of N fertilisation had no effect on CH(4) emissions per units of FPCM, DMI and gross energy intake. These results suggest that despite a lower absolute daily CH(4) production with a higher N fertilisation rate, CH(4) emission intensity remains unchanged. A significant reduction of CH(4) emission intensity can be achieved by feeding dairy cows silage of grass harvested at an earlier stage of maturity.

A research factory for polymer microdevices: muFac

NASA Astrophysics Data System (ADS)

Anthony, Brian W.; Hardt, David E.; Hale, Melinda; Zarrouati, Nadege

2010-02-01

As part of our research on the manufacturing science of micron scale polymer-based devices, an automated production cell has been developed to explore its use in a volume manufacturing environment. This "micro-factory" allows the testing of models and hardware that have resulted from research on material characterization and simulation, tooling and equipment design and control, and process control and metrology. More importantly it has allowed us to identify the problems that exist between and within unit-processes. This paper details our efforts to produce basic micro-fluidic products in high volume at acceptable production rates and quality levels. The device chosen for our first product is a simple binary micromixer with 40×50 micron channel cross section manufactured by embossing of PMMA. The processes in the cell include laser cutting and drilling, hot embossing, thermal bonding and high-speed inspection of the components. Our goal is to create a "lights-out" factory that can make long production runs (e.g. an 8 hour shift) at high rates (Takt time of less than 3 minutes) with consistent quality. This contrasts with device foundries where prototypes in limited quantities but with high variety are the goal. Accordingly, rate and yield are dominant factors in this work, along with the need for precise material handling strategies. Production data will be presented to include process run charts, sampled functional testing of the products and measures of the overall system throughput.

Analysis of digester design concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashare, E.; Wilson, E. H.

1979-01-29

Engineering economic analyses were performed on various digester design concepts to determine the relative performance for various biomass feedstocks. A comprehensive literature survey describing the state-of-the-art of the various digestion designs is included. The digester designs included in the analyses are CSTR, plug flow, batch, CSTR in series, multi-stage digestion and biomethanation. Other process options investigated included pretreatment processes such as shredding, degritting, and chemical pretreatment, and post-digestion processes, such as dewatering and gas purification. The biomass sources considered include feedlot manure, rice straw, and bagasse. The results of the analysis indicate that the most economical (on a unit gasmore » cost basis) digester design concept is the plug flow reactor. This conclusion results from this system providing a high gas production rate combined with a low capital hole-in-the-ground digester design concept. The costs determined in this analysis do not include any credits or penalties for feedstock or by-products, but present the costs only for conversion of biomass to methane. The batch land-fill type digester design was shown to have a unit gas cost comparable to that for a conventional stirred tank digester, with the potential of reducing the cost if a land-fill site were available for a lower cost per unit volume. The use of chemical pretreatment resulted in a higher unit gas cost, primarily due to the cost of pretreatment chemical. A sensitivity analysis indicated that the use of chemical pretreatment could improve the economics provided a process could be developed which utilized either less pretreatment chemical or a less costly chemical. The use of other process options resulted in higher unit gas costs. These options should only be used when necessary for proper process performance, or to result in production of a valuable by-product.« less

Relationship of employee-reported work limitations to work productivity.

PubMed

Lerner, Debra; Amick, Benjamin C; Lee, Jennifer C; Rooney, Ted; Rogers, William H; Chang, Hong; Berndt, Ernst R

2003-05-01

Work limitation rates are crucial indicators of the health status of working people. If related to work productivity, work limitation rates may also supply important information about the economic burden of illness. Our objective was to assess the productivity impact of on-the-job work limitations due to employees' physical or mental health problems. Subjects were asked to complete a self-administered survey on the job during 3 consecutive months. Using robust regression analysis, we tested the relationship of objectively-measured work productivity to employee-reported work limitations. We attempted to survey employees of a large firm within 3 different jobs. The survey response rate was 2245 (85.9%). Full survey and productivity data were available for 1827 respondents. Each survey included a validated self-report instrument, the Work Limitations Questionnaire (WLQ). The firm provided objective, employee-level work productivity data. In adjusted regression analyses (n = 1827), employee work productivity (measured as the log of units produced/hour) was significantly associated with 3 dimensions of work limitations: limitations handling the job's time and scheduling demands (P = 0.003), physical job demands (P = 0.001), and output demands (P = 0.006). For every 10% increase in on-the-job work limitations reported on each of the 3 WLQ scales, work productivity declined approximately 4 to 5%. Employee work limitations have a negative impact on work productivity. Employee assessments of their work limitations supply important proxies for the economic burden of health problems.

Nutritional content of television food advertisements seen by children and adolescents in the United States.

PubMed

Powell, Lisa M; Szczypka, Glen; Chaloupka, Frank J; Braunschweig, Carol L

2007-09-01

In light of the high rates of child and adolescent obesity, we examined the nutritional content of food advertising seen by American children and adolescents. We drew samples of top-rated television shows by using ratings data to examine the nutritional content for fat, saturated fat, sugar, sodium, and fiber of food-product advertisements seen on television by both children and adolescents. Food products were examined in aggregate and by 5 separate categories that included cereal, sweets, snacks, drinks, and other food products. For 2- to 11-year-olds and 12- to 17-year-olds, respectively, a sample of 50,351 and 47,955 30-second-equivalent food-product advertisements and their related nutritional content were weighted by television ratings data to provide actual exposure measures of the nutritional content of food advertising seen by children and adolescents. Study results showed that 97.8% and 89.4% of food-product advertisements viewed by children 2 to 11 years old and adolescents 12 to 17 years old, respectively, were high in fat, sugar, or sodium. On average, 46.1% and 49.1% of total calories among the products advertised came from sugar in the advertisements seen by these respective age groups. A total of 97.6% of cereal advertisements seen by children 2 to 11 years old were for high-sugar cereals. No substantial differences were found in the nutritional content of advertisements seen by black and white children 2 to 11 years old. However, a slightly higher proportion of food advertisements in general and across all food-product categories seen by black versus white adolescents were for high-sugar products. The overwhelming majority of food-product advertisements seen on television by American children and adolescents are of poor nutritional content.

Technical Note: On maximizing Cherenkov emissions from medical linear accelerators.

PubMed

Shrock, Zachary; Yoon, Suk W; Gunasingha, Rathnayaka; Oldham, Mark; Adamson, Justus

2018-04-19

Cherenkov light during MV radiotherapy has recently found imaging and therapeutic applications but is challenged by relatively low fluence. Our purpose is to investigate the feasibility of increasing Cherenkov light production during MV radiotherapy by increasing photon energy and applying specialized beam-hardening filtration. GAMOS 5.0.0, a GEANT4-based framework for Monte Carlo simulations, was used to model standard clinical linear accelerator primary photon beams. The photon source was incident upon a 17.8 cm 3 cubic water phantom with a 94 cm source to surface distance. Dose and Cherenkov production was determined at depths of 3-9 cm. Filtration was simulated 15 cm below the photon beam source. Filter materials included aluminum, iron, and copper with thicknesses of 2-20 cm. Histories used depended on the level of attenuation from the filter, ranging from 100 million to 2 billion. Comparing average dose per history also allowed for evaluation of dose-rate reduction for different filters. Overall, increasing photon beam energy is more effective at improving Cherenkov production per unit dose than is filtration, with a standard 18 MV beam yielding 3.3-4.0× more photons than 6 MV. Introducing an aluminum filter into an unfiltered 2400 cGy/min 10 MV beam increases the Cherenkov production by 1.6-1.7×, while maintaining a clinical dose rate of 300 cGy/min, compared to increases of ~1.5× for iron and copper. Aluminum was also more effective than the standard flattening filter, with the increase over the unfiltered beam being 1.4-1.5× (maintaining 600 cGy/min dose rate) vs 1.3-1.4× for the standard flattening filter. Applying a 10 cm aluminum filter to a standard 18 MV, photon beam increased the Cherenkov production per unit dose to 3.9-4.3× beyond that of 6 MV (vs 3.3-4.0× for 18 MV with no aluminum filter). Through a combination of increasing photon energy and applying specialized beam-hardening filtration, the amount of Cherenkov photons per unit radiotherapy dose can be increased substantially. © 2018 American Association of Physicists in Medicine.

Iron and steel recycling in the United States in 1998

USGS Publications Warehouse

Fenton, Michael D.

2001-01-01

Consumption of iron and steel scrap and the health of the scrap industry depend directly on the health of the steelmaking industry. The United States, as well as most of the world, is expected to consume increasing amounts of scrap as a steadily increasing population demands more steel products. World resources of scrap should be sufficient for the foreseeable future. An estimated 75 million metric tons (Mt) of scrap was generated during 1998 in the United States, and 35 Mt of old scrap and 18 Mt of new scrap was consumed. The recycling efficiency was calculated to be 52%, and the recycling rate was found to be 41%. (See appendix for definitions.)

Unintentional Pediatric Exposures to Marijuana in Colorado, 2009-2015.

PubMed

Wang, George Sam; Le Lait, Marie-Claire; Deakyne, Sara J; Bronstein, Alvin C; Bajaj, Lalit; Roosevelt, Genie

2016-09-06

As of 2015, almost half of US states allow medical marijuana, and 4 states allow recreational marijuana. To our knowledge, the effect of recreational marijuana on the pediatric population has not been evaluated. To compare the incidence of pediatric marijuana exposures evaluated at a children's hospital and regional poison center (RPC) in Colorado before and after recreational marijuana legalization and to compare population rate trends of RPC cases for marijuana exposures with the rest of the United States. Retrospective cohort study of hospital admissions and RPC cases between January 1, 2009, and December 31, 2015, at Children's Hospital Colorado, Aurora, a tertiary care children's hospital. Participants included patients 0 to 9 years of age evaluated at the hospital's emergency department, urgent care centers, or inpatient unit and RPC cases from Colorado for single-substance marijuana exposures. Marijuana. Marijuana exposure visits and RPC cases, marijuana source and type, clinical effects, scenarios, disposition, and length of stay. Eighty-one patients were evaluated at the children's hospital, and Colorado's RPC received 163 marijuana exposure cases between January 1, 2009, and December 31, 2015, for children younger than 10 years of age. The median age of children's hospital visits was 2.4 years (IQR, 1.4-3.4); 25 were girls (40%) . The median age of RPC marijuana exposures was 2 years (IQR, 1.3-4.0), and 85 patients were girls (52%). The mean rate of marijuana-related visits to the children's hospital increased from 1.2 per 100 000 population 2 years prior to legalization to 2.3 per 100,000 population 2 years after legalization (P = .02). Known marijuana products involved in the exposure included 30 infused edibles (48%). Median length of stay was 11 hours (interquartile range [IQR], 6-19) and 26 hours (IQR, 19-38) for admitted patients. Annual RPC pediatric marijuana cases increased more than 5-fold from 2009 (9) to 2015 (47). Colorado had an average increase in RPC cases of 34% (P < .001) per year while the remainder of the United States had an increase of 19% (P < .001). For 10 exposure scenarios (9%), the product was not in a child-resistant container; for an additional 40 scenarios (34%), poor child supervision or product storage was reported. Edible products were responsible for 51 exposures (52%). Colorado RPC cases for pediatric marijuana increased significantly and at a higher rate than the rest of the United States. The number of children's hospital visits and RPC case rates for marijuana exposures increased between the 2 years prior to and the 2 years after legalization. Almost half of the patients seen in the children's hospital in the 2 years after legalization had exposures from recreational marijuana, suggesting that legalization did affect the incidence of exposures.

Gas Exchange of Algae

PubMed Central

Ammann, Elizabeth C. B.; Lynch, Victoria H.

1967-01-01

The oxygen production of a photosynthetic gas exchanger containing Chlorella pyrenoidosa (1% packed cell volume) was measured when various concentrations of carbon dioxide were present within the culture unit. The internal carbon dioxide concentrations were obtained by manipulating the entrance gas concentration and the flow rate. Carbon dioxide percentages were monitored by means of electrodes placed directly in the nutrient medium. The concentration of carbon dioxide in the nutrient medium which produced maximal photosynthesis was in the range of 1.5 to 2.5% by volume. Results were unaffected by either the level of carbon dioxide in the entrance gas or the rate of gas flow. Entrance gases containing 2% carbon dioxide flowing at 320 ml/min, 3% carbon dioxide at 135 ml/min, and 4% carbon dioxide at 55 ml/min yielded optimal carbon dioxide concentrations in the particular unit studied. By using carbon dioxide electrodes implanted directly in the gas exchanger to optimize the carbon dioxide concentration throughout the culture medium, it should be possible to design more efficient large-scale units. PMID:4382391

Hostile marital interactions, proinflammatory cytokine production, and wound healing.

PubMed

Kiecolt-Glaser, Janice K; Loving, Timothy J; Stowell, Jeffrey R; Malarkey, William B; Lemeshow, Stanley; Dickinson, Stephanie L; Glaser, Ronald

2005-12-01

A growing epidemiological literature has suggested that marital discord is a risk factor for morbidity and mortality. In addition, depression and stress are associated with enhanced production of proinflammatory cytokines that influence a spectrum of conditions associated with aging. To assess how hostile marital behaviors modulate wound healing, as well as local and systemic proinflammatory cytokine production. Couples were admitted twice to a hospital research unit for 24 hours in a crossover trial. Wound healing was assessed daily following research unit discharge. Volunteer sample of 42 healthy married couples, aged 22 to 77 years (mean [SD], 37.04 [13.05]), married a mean (SD) of 12.55 (11.01) years. During the first research unit admission, couples had a structured social support interaction, and during the second admission, they discussed a marital disagreement. Couples' interpersonal behavior, wound healing, and local and systemic changes in proinflammatory cytokine production were assessed during each research unit admission. Couples' blister wounds healed more slowly and local cytokine production (IL-6, tumor necrosis factor alpha, and IL-1beta) was lower at wound sites following marital conflicts than after social support interactions. Couples who demonstrated consistently higher levels of hostile behaviors across both their interactions healed at 60% of the rate of low-hostile couples. High-hostile couples also produced relatively larger increases in plasma IL-6 and tumor necrosis factor alpha values the morning after a conflict than after a social support interaction compared with low-hostile couples. These data provide further mechanistic evidence of the sensitivity of wound healing to everyday stressors. Moreover, more frequent and amplified increases in proinflammatory cytokine levels could accelerate a range of age-related diseases. Thus, these data also provide a window on the pathways through which hostile or abrasive relationships affect physiological functioning and health.

Chemical stability of insulin. 2. Formation of higher molecular weight transformation products during storage of pharmaceutical preparations.

PubMed

Brange, J; Havelund, S; Hougaard, P

1992-06-01

Formation of covalent, higher molecular weight transformation (HMWT) products during storage of insulin preparations at 4-45 degrees C was studied by size exclusion chromatography. The main products are covalent insulin dimers (CID), but in protamine-containing preparations the concurrent formation of covalent insulin-protamine (CIP) products takes place. At temperatures greater than or equal to 25 degrees C parallel or consecutive formation of covalent oligo- and polymers can also be observed. Rate of HMWT is only slightly influenced by species of insulin but varies with composition and formulation, and for isophane (NPH) preparations, also with the strength of preparation. Temperature has a pronounced effect on CID, CIP, and, especially, covalent oligo- and polymer formation. The CIDs are apparently formed between molecules within the hexameric unit common for all types of preparations and rate of formation is generally faster in glycerol-containing preparations. Compared with insulin hydrolysis reactions (see the preceding paper), HMWT is one order of magnitude slower, except for NPH preparations.

Regional distribution and losses of end-of-life steel throughout multiple product life cycles-Insights from the global multiregional MaTrace model.

PubMed

Pauliuk, Stefan; Kondo, Yasushi; Nakamura, Shinichiro; Nakajima, Kenichi

2017-01-01

Substantial amounts of post-consumer scrap are exported to other regions or lost during recovery and remelting, and both export and losses pose a constraint to desires for having regionally closed material cycles. To quantify the challenges and trade-offs associated with closed-loop metal recycling, we looked at the material cycles from the perspective of a single material unit and trace a unit of material through several product life cycles. Focusing on steel, we used current process parameters, loss rates, and trade patterns of the steel cycle to study how steel that was originally contained in high quality applications such as machinery or vehicles with stringent purity requirements gets subsequently distributed across different regions and product groups such as building and construction with less stringent purity requirements. We applied MaTrace Global, a supply-driven multiregional model of steel flows coupled to a dynamic stock model of steel use. We found that, depending on region and product group, up to 95% of the steel consumed today will leave the use phase of that region until 2100, and that up to 50% can get lost in obsolete stocks, landfills, or slag piles until 2100. The high losses resulting from business-as-usual scrap recovery and recycling can be reduced, both by diverting postconsumer scrap into long-lived applications such as buildings and by improving the recovery rates in the waste management and remelting industries. Because the lifetimes of high-quality (cold-rolled) steel applications are shorter and remelting occurs more often than for buildings and infrastructure, we found and quantified a tradeoff between low losses and high-quality applications in the steel cycle. Furthermore, we found that with current trade patterns, reduced overall losses will lead to higher fractions of secondary steel being exported to other regions. Current loss rates, product lifetimes, and trade patterns impede the closure of the steel cycle.

Biogeochemical consequences of regional land use change to a biofuel crop in the southeastern United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duval, Benjamin D.; Hartman, Melannie; Marx, Ernest

Here, the United States has mandated the production of 80 billion liters of second–generation biofuel by 2022, and several approaches to meet this target focus on using ligno–cellulosic ethanol from perennial grasses and non–food crops. The large–scale deployment of biofuel agronomy should consider high–yielding crops that meet ethanol production goals, choose appropriate landscapes for biofuel crops from a climate and food production standpoint, and a full consideration of the environmental impact of large–scale land use change. The southeastern United States has a long growing season conducive for producing high–yielding crops, and is relatively less important to US food production thanmore » the rain–fed Midwestern states that have been extensively studied for biofuel crops. We use the DayCent biogeochemical model to run simulation experiments to test the hypotheses that converting a large swath of traditional agriculture in the southeastern United States that is already utilized for bioenergy production (assuming 35% of current corn–soy, and 10% of grazed pasture hectares; ~950,000 ha) to energy cane will result in greater biomass production, increased soil C storage, decreased soil N losses and lower greenhouse gas emissions than a landscape of corn–soy rotations and interspersed grazed pasture. Our simulations suggest that energy cane above–ground productivity on former pasture and corn–soy fields would be between 52–59 million Mg dry mass per year, resulting in 21.1–23.7 billion liters of ligno–cellulosic ethanol, or ~28% of the 2022 US government mandate. DayCent did not predict significant changes in soil C flux from land conversion to energy cane, but simulations predicted lower rates of N loss compared to current agriculture. GHG emissions from energy cane landscapes were substantially higher on former pasture, but an order of magnitude lower when compared to corn–soy hectares. While further study is needed to ascertain the full economic and industrial feasibility of converting nearly 1,000,000 ha of land to energy cane production, our results suggest that such an undertaking could meet a sizeable fraction of the US ethanol mandate, reduce N pollution and GHG emissions, and avoid compromising land devoted to food production in the southeastern United States.« less

Biogeochemical consequences of regional land use change to a biofuel crop in the southeastern United States

DOE PAGES

Duval, Benjamin D.; Hartman, Melannie; Marx, Ernest; ...

2015-12-11

Here, the United States has mandated the production of 80 billion liters of second–generation biofuel by 2022, and several approaches to meet this target focus on using ligno–cellulosic ethanol from perennial grasses and non–food crops. The large–scale deployment of biofuel agronomy should consider high–yielding crops that meet ethanol production goals, choose appropriate landscapes for biofuel crops from a climate and food production standpoint, and a full consideration of the environmental impact of large–scale land use change. The southeastern United States has a long growing season conducive for producing high–yielding crops, and is relatively less important to US food production thanmore » the rain–fed Midwestern states that have been extensively studied for biofuel crops. We use the DayCent biogeochemical model to run simulation experiments to test the hypotheses that converting a large swath of traditional agriculture in the southeastern United States that is already utilized for bioenergy production (assuming 35% of current corn–soy, and 10% of grazed pasture hectares; ~950,000 ha) to energy cane will result in greater biomass production, increased soil C storage, decreased soil N losses and lower greenhouse gas emissions than a landscape of corn–soy rotations and interspersed grazed pasture. Our simulations suggest that energy cane above–ground productivity on former pasture and corn–soy fields would be between 52–59 million Mg dry mass per year, resulting in 21.1–23.7 billion liters of ligno–cellulosic ethanol, or ~28% of the 2022 US government mandate. DayCent did not predict significant changes in soil C flux from land conversion to energy cane, but simulations predicted lower rates of N loss compared to current agriculture. GHG emissions from energy cane landscapes were substantially higher on former pasture, but an order of magnitude lower when compared to corn–soy hectares. While further study is needed to ascertain the full economic and industrial feasibility of converting nearly 1,000,000 ha of land to energy cane production, our results suggest that such an undertaking could meet a sizeable fraction of the US ethanol mandate, reduce N pollution and GHG emissions, and avoid compromising land devoted to food production in the southeastern United States.« less

The effect of spices and manganese on meat starter culture activity.

PubMed

Coventry, M J; Hickey, M W

1993-01-01

Three species, two proprietary spice blends and six starter preparations used in commercial salami manufacture were analysed for manganese and magnesium content. A mettwurst spices blend showed the highest levels of manganese (0·77 ppm expressed as effective product level assuming a 1% spice content) while mild and hot paprika and milano blend contained levels of manganese 1 4 - 1 3 lower. Magnesium levels for spices ranged from 3·14 to 25·81 ppm. Only two of the six meat starter cultures showed high levels of manganese (7·77 and 16·12 ppm as effective product level based on inoculation rate) while magnesium levels for all starter cultures did not exceed 0·37 ppm. The pH of salami products made with starter cultures containing no added manganese lagged behind that of products made with added mangenese (5 ppm) by 0·2 pH units at 48 h. The effect of manganese ions on the fermentation rate of starter bacteria was studied further in a salami model system, in the absence and presence of added spices. The mettwurst blend produced greatest stimulation and the milano the least. A level of 1·2 ppm of added manganese was sufficient to achieve an optimal (< 4·9 pH units within 48 h) fermentation in the presence of all five spices tested in the salami model system. Copyright © 1993. Published by Elsevier Ltd.

Municipal wastewater sludge as a sustainable bioresource in the United States.

PubMed

Seiple, Timothy E; Coleman, André M; Skaggs, Richard L

2017-07-15

Within the United States and Puerto Rico, publicly owned treatment works (POTWs) process 130.5 Gl/d (34.5 Bgal/d) of wastewater, producing sludge as a waste product. Emerging technologies offer novel waste-to-energy pathways through whole sludge conversion into biofuels. Assessing the feasibility, scalability and tradeoffs of various energy conversion pathways is difficult in the absence of highly spatially resolved estimates of sludge production. In this study, average wastewater solids concentrations and removal rates, and site specific daily average influent flow are used to estimate site specific annual sludge production on a dry weight basis for >15,000 POTWs. Current beneficial uses, regional production hotspots and feedstock aggregation potential are also assessed. Analyses indicate 1) POTWs capture 12.56 Tg/y (13.84 MT/y) of dry solids; 2) 50% are not beneficially utilized, and 3) POTWs can support seven regions that aggregate >910 Mg/d (1000 T/d) of sludge within a travel distance of 100 km. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

The Public Health Challenge of Consumer Non-Compliance to Toy Product Recalls and Proposed Solutions

PubMed Central

Yu, Xiayang

2018-01-01

This paper addresses the public health issue of toy product recalls in the United States, an under-addressed topic in scholarly literature, yet highly relevant to the prevention of pediatric injuries. Toy-related injuries led to 274,000 emergency room visits and seven fatalities in 2016 in the United States, and toy-related injury rates have remained stable over the last five years despite declining incidences of recalls. While dangerous toys not being recalled and the misuse of “safe” products are possible contributing factors, consumer non-response to recall notices also contributes to unintentional child injury from dangerous toys. We discuss the process of recalling toys, and the role of the U.S. Consumer Product Safety Commission in that process. We also review potential factors behind significant consumer non-response to recall notifications, citing economic and psychological theories as explanations for the actions of multiple stakeholders in the recall process. We close by proposing reforms at the regulatory, consumer, and retailer levels that might boost compliance with recall notifications and ultimately reduce injury morbidity and mortality. PMID:29562602

Planification de la maintenance d'un parc de turbines-alternateurs par programmation mathematique

NASA Astrophysics Data System (ADS)

Aoudjit, Hakim

A growing number of Hydro-Quebec's hydro generators are at the end of their useful life and maintenance managers fear to face a number of overhauls exceeding what can be handled. Maintenance crews and budgets are limited and these withdrawals may take up to a full year and mobilize significant resources in addition to the loss of electricity production. In addition, increased export sales forecasts and severe production patterns are expected to speed up wear that can lead to halting many units at the same time. Currently, expert judgment is at the heart of withdrawals which rely primarily on periodic inspections and in-situ measurements and the results are sent to the maintenance planning team who coordinate all the withdrawals decisions. The degradations phenomena taking place is random in nature and the prediction capability of wear using only inspections is limited to short-term at best. A long term planning of major overhauls is sought by managers for the sake of justifying and rationalizing budgets and resources. The maintenance managers are able to provide a huge amount of data. Among them, is the hourly production of each unit for several years, the repairs history on each part of a unit as well as major withdrawals since the 1950's. In this research, we tackle the problem of long term maintenance planning for a fleet of 90 hydro generators at Hydro-Quebec over a 50 years planning horizon period. We lay a scientific and rational framework to support withdrawals decisions by using part of the available data and maintenance history while fulfilling a set of technical and economic constraints. We propose a planning approach based on a constrained optimization framework. We begin by decomposing and sorting hydro generator components to highlight the most influential parts. A failure rate model is developed to take into account the technical characteristics and unit utilization. Then, replacement and repair policies are evaluated for each of the components then strategies are derived for the whole unit. Traditional univariate policies such as the age replacement policy and the minimal repair policy are calculated. These policies are extended to build alternative bivariate maintenance policy as well as a repair strategy where the state of a component after a repair is rejuvenated by a constant coefficient. These templates form the basis for the calculation of objective function for the scheduling problem. On one hand, this issue is treated as a nonlinear problem where the objective is to minimize the average total maintenance cost per unit of time on an infinite horizon for the fleet with technical and economic constraints. A formulation is also proposed in the case of a finite time horizon. In the event of electricity production variation, and given that the usage profile is known, the influence of production scenarios is reflected on the unit's components through their failure rate. In this context, prognoses on possible resources problems are made by studying the characteristics of the generated plans. On the second hand, the withdrawals are now subjected to two decision criteria. In addition to minimizing the average total maintenance cost per unit of time on an infinite time horizon, the best achievable reliability of remaining turbo generators is sought. This problem is treated as a biobjective nonlinear optimization problem. Finally a series of problems describing multiple contexts are solved for planning renovations of 90 turbo generators units considering 3 major components in each unit and 2 types of maintenance policies for each component.

Characterizing tight-gas systems with production data: Wyoming, Utah, and Colorado

USGS Publications Warehouse

Nelson, Philip H.; Santus, Stephen L.; Baez, Luis; Beeney, Ken; Sonnenberg, Steve

2013-01-01

The study of produced fluids allows comparisons among tight-gas systems. This paper examines gas, oil, and water production data from vertical wells in 23 fields in five Rocky Mountain basins of the United States, mostly from wells completed before the year 2000. Average daily rates of gas, oil, and water production are determined two years and seven years after production begins in order to represent the interval in which gas production declines exponentially. In addition to the daily rates, results are also presented in terms of oil-to-gas and water-to-gas ratios, and in terms of the five-year decline in gas production rates and water-to-gas ratios. No attempt has been made to estimate the ultimate productivity of wells or fields. The ratio of gas production rates after seven years to gas production rates at two years is about one-half, with median ratios falling within a range of 0.4 to 0.6 in 16 fields. Oil-gas ratios show substantial variation among fields, ranging from dry gas (no oil) to wet gas to retrograde conditions. Among wells within fields, the oil-gas ratios vary by a factor of three to thirty, with the exception of the Lance Formation in Jonah and Pinedale fields, where the oil-gas ratios vary by less than a factor of two. One field produces water-free gas and a large fraction of wells in two other fields produce water-free gas, but most fields have water-gas ratios greater than 1 bbl/mmcf—greater than can be attributed to water dissolved in gas in the reservoir— and as high as 100 bbl/mmcf. The median water-gas ratio for fields increases moderately with time, but in individual wells water influx relative to gas is erratic, increasing greatly with time in many wells while remaining constant or decreasing in others.

Jobs and the resource curse in the sun: The effects of oil production on female labor force participation in California counties from 1980-2010

NASA Astrophysics Data System (ADS)

Zavala, Gabriel

This study aims to evaluate the relationship between oil income and the female labor force participation rate in California for the years of 1980, 1990, 2000 and 2010 using panel linear regression models. This study also aims to visualize the spatial patterns of both variables in California through Hot Spot analysis at the county level for the same years. The regression found no sign of a relationship between oil income and female labor force participation rate but did find evidence of a positive relationship between two income control variables and the female labor force participation rate. The hot spot analysis also found that female labor force participation cold spots are not spatially correlated with oil production hot spots. These findings contribute new methodologies at a finer scale to the very nuanced discussion of the resource curse in the United States.

76 FR 55111 - United States v. General Electric Co., et al.; Proposed Final Judgment and Competitive Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-06

... areas in the energy industry, including coal, oil, natural gas, and nuclear energy, as well as in... higher power ratings. 12. In processing and refining crude oil into petroleum products, oil refineries... energy industry, including coal, oil, natural gas, and nuclear energy, as well as in renewable resources...

Restoration strategies for a native perennial: Germination and seedling physiology of Sphaeralcea munroana

Treesearch

Olga A. Kildesheva

2011-01-01

The Great Basin region of the western United States has undergone significant disturbance and fragmentation because of overgrazing for livestock production, disruption of the natural fire regimes, and the introduction of non-native species. At present, habitat loss greatly surpasses the rate of system recovery, making restoration integral to ecosystem function and...

On the Relationship between Marital Opportunity and Teen Pregnancy: The Sex Ratio Question.

ERIC Educational Resources Information Center

Barber, Nigel

2001-01-01

Used United Nations cross-national data to examine the relationship between low sex ratio, marital opportunity, and teen pregnancy. Geographical region, per capita gross national product, marital rate, and urban and rural status were used as control variables in analyses that utilized sex ratios to predict teen births. Overall, early childbearing…

Identifying Strategies for Increasing Degree Attainment in STEM: Lessons from Minority-Serving Institutions

ERIC Educational Resources Information Center

Perna, Laura W.; Gasman, Marybeth; Gary, Shannon; Lundy-Wagner, Valerie; Drezner, Noah D.

2010-01-01

To compete in the global marketplace, numerous reports point to the need for the United States to increase its production of highly educated workers in science, technology, engineering, and mathematics (STEM). Although estimates suggest that the number of STEM-related jobs will grow faster than other jobs, the rate of bachelor's degree production…

K-12 Online Learning and the Training Needs for School Psychology Practitioners

ERIC Educational Resources Information Center

Tysinger, P. Dawn; Tysinger, Jeff; Diamanduros, Terry; Kennedy, Kathryn

2013-01-01

K-12 online learning is growing at an exponential rate in the United States and around the world. Students and teachers are entering and embracing the K-12 online learning environment. Thus, it becomes imperative for school psychologists to follow. In order to offer the most productive learning environment for all students, the services provided…

The severity of toxic reactions to ephedra: comparisons to other botanical products and national trends from 1993-2002.

PubMed

Woolf, Alan D; Watson, William A; Smolinske, Susan; Litovitz, Toby

2005-01-01

Ephedra is a botanical product widely used to enhance alertness, as a weight loss aide, and as a decongestant. Its reported adverse effects led the Food and Drug Administration (FDA) to ban ephedra-containing products in the United States in 2004. This study's purpose was to compare toxicity from botanical products containing ephedra to nonephedra products. The Toxic Exposure Surveillance System (TESS), a national poison center database, was utilized to determine the number and outcomes of cases involving botanical products reported from 1993-2002. Cases listing both a botanical product and any other drugs or chemicals were excluded a priori. Ten-year hazard rates (moderate outcomes + major outcomes + deaths per 1000 exposures) were used to compare botanical product categories. There were 21,533 toxic exposures with definitive medical outcomes reported over the 10 yrs where a botanical product was the only substance involved. Of these, 4306 (19.9%) had moderate or major medical outcomes and there were two deaths, for an overall hazard score of 200 per 1000 exposures. The number of ephedra reports to poison centers increased 150-fold over the 10-yr period. The hazard rate for products that contained only ephedra was 250 per 1000 exposures and 267 per 1000 exposures for products that contained ephedra and additional ingredients; whereas the hazard score for only nonephedra botanical products was 96 per 1000 exposures. The rate ratios for multibotanical products with ephedra (RR 1.33; 95% C.I. 1.27-1.40) and for single-ingredient ephedra products (RR 1.25; 95% C.I. 1.11-1.40) were both two to six times higher than those of other common botanical products. Yohimbe-containing products had the highest hazard score (417) and rate ratio (2.08; 95% C.I. 1.59-2.80). Ephedra-containing botanical products accounted for a significant number of toxic exposures with severe medical outcomes reported to poison centers. Hazard rate analysis suggests poison center-reported events involving ephedra-containing botanical products were much more likely to result in severe medical outcomes than those involving nonephedra-containing botanical products. These data support recommendations by policymakers that the sale of ephedra should be prohibited to protect consumers. Our data suggest that the botanical product, yohimbe, may also be associated with unacceptably high risks of toxicity and should receive close scrutiny from health policymakers.

Efficacy of cleaning products for C difficile

PubMed Central

MacLeod-Glover, Nora; Sadowski, Cheryl

2010-01-01

Abstract OBJECTIVE To review the evidence for the efficacy of products used for environmental or hand cleaning on the rates of Clostridium difficile–associated diarrhea (CDAD). QUALITY OF EVIDENCE MEDLINE, EMBASE, and the Cochrane Database of Systematic Reviews were searched for articles pertinent to the efficacy of cleaning products against C difficile or studies with outcomes related to rates of CDAD. Evidence was level II. MAIN MESSAGE Minimizing the incidence of CDAD in geriatric rehabilitation units is essential to achieving the goals of increasing patient function and independence for discharge into the community. Attention to environmental control of C difficile and its spores by health care workers and patient visitors is an important secondary prevention strategy. CONCLUSION Chlorine-releasing agents are more effective than detergents for killing spores produced by C difficile. No level I evidence is available to determine if the use of chlorine-releasing agents has an effect on rates of CDAD. Hand-washing is currently the recommended strategy for reducing transmission of C difficile. Alcohol gels do not inactivate C difficile spores; however, increased use of alcohol hand gel has not been associated with higher rates of CDAD. PMID:20463269

Efficacy of cleaning products for C. difficile: environmental strategies to reduce the spread of Clostridium difficile-associated diarrhea in geriatric rehabilitation.

PubMed

Macleod-Glover, Nora; Sadowski, Cheryl

2010-05-01

To review the evidence for the efficacy of products used for environmental or hand cleaning on the rates of Clostridium difficile-associated diarrhea (CDAD). MEDLINE, EMBASE, and the Cochrane Database of Systematic Reviews were searched for articles pertinent to the efficacy of cleaning products against C. difficile or studies with outcomes related to rates of CDAD. Evidence was level II. Minimizing the incidence of CDAD in geriatric rehabilitation units is essential to achieving the goals of increasing patient function and independence for discharge into the community. Attention to environmental control of C. difficile and its spores by health care workers and patient visitors is an important secondary prevention strategy. Chlorine-releasing agents are more effective than detergents for killing spores produced by C. difficile. No level I evidence is available to determine if the use of chlorine-releasing agents has an effect on rates of CDAD. Hand-washing is currently the recommended strategy for reducing transmission of C. difficile. Alcohol gels do not inactivate C. difficile spores; however, increased use of alcohol hand gel has not been associated with higher rates of CDAD.

Evaluation of High Rate Algae Ponds for treatment of anaerobically digested wastewater: Effect of CO2 addition and modification of dilution rate.

PubMed

de Godos, I; Arbib, Z; Lara, E; Rogalla, F

2016-11-01

High Rate Algae Ponds (HRAP) are the simplest way to grow microalgae biomass and an interesting alternative for wastewater treatment. In this work the performance of these systems was evaluated using anaerobically digested wastewater as culture medium. Two variables were studied in long-term mode: the carbon dioxide supply and the modification of the dilution rates. The results showed that CO2 supply increases the productivity but less than expected considering the potential biomass generation calculated based on the ratios of carbon to nitrogen of microalgae and wastewater. The assimilation into biomass only accounted for 57% of the inlet nitrogen under the best conditions because nitrification and volatilization reduced the availability of this element. The operation under short hydraulic retention times presented a more interesting performance with higher biomass productivities. The biomass produced was efficiently harvested with in a Dissolved Air Flotation (DAF) unit. Copyright © 2016 Elsevier Ltd. All rights reserved.

Waste Conversion into n-Caprylate and n-Caproate: Resource Recovery from Wine Lees Using Anaerobic Reactor Microbiomes and In-line Extraction

PubMed Central

Kucek, Leo A.; Xu, Jiajie; Nguyen, Mytien; Angenent, Largus T.

2016-01-01

To convert wastes into sustainable liquid fuels and chemicals, new resource recovery technologies are required. Chain elongation is a carboxylate-platform bioprocess that converts short-chain carboxylates (SCCs) (e.g., acetate [C2] and n-butyrate [C4]) into medium-chain carboxylates (MCCs) (e.g., n-caprylate [C8] and n-caproate [C6]) with hydrogen gas as a side product. Ethanol or another electron donor (e.g., lactate, carbohydrate) is required. Competitive MCC productivities, yields (product vs. substrate fed), and specificities (product vs. all products) were only achieved previously from an organic waste material when exogenous ethanol had been added. Here, we converted a real organic waste, which inherently contains ethanol, into MCCs with n-caprylate as the target product. We used wine lees, which consisted primarily of settled yeast cells and ethanol from wine fermentation, and produced MCCs with a reactor microbiome. We operated the bioreactor at a pH of 5.2 and with continuous in-line extraction and achieved a MCC productivity of 3.9 g COD/L-d at an organic loading rate of 5.8 g COD/L-d, resulting in a promising MCC yield of 67% and specificities of 36% for each n-caprylate and n-caproate (72% for both). Compared to all other studies that used complex organic substrates, we achieved the highest n-caprylate-to-ncaproate product ratio of 1.0 (COD basis), because we used increased broth-recycle rates through the forward membrane contactor, which improved in-line extraction rates. Increased recycle rates also allowed us to achieve the highest reported MCC production flux per membrane surface area thus far (20.1 g COD/m2-d). Through microbial community analyses, we determined that an operational taxonomic unit (OTU) for Bacteroides spp. was dominant and was positively correlated with increased MCC productivities. Our data also suggested that the microbiome may have been shaped for improved MCC production by the high broth-recycle rates. Comparable abiotic studies suggest that further increases in the broth-recycle rates could improve the overall mass transfer coefficient and its corresponding MCC production flux by almost 30 times beyond the maximum that we achieved. With improved in-line extraction, the chain-elongation biotechnology production platform offers new opportunities for resource recovery and sustainable production of liquid fuels and chemicals. PMID:27933053

Economic and Environmental Assessment of Seed and Rhizome Propagated Miscanthus in the UK.

PubMed

Hastings, Astley; Mos, Michal; Yesufu, Jalil A; McCalmont, Jon; Schwarz, Kai; Shafei, Reza; Ashman, Chris; Nunn, Chris; Schuele, Heinrich; Cosentino, Salvatore; Scalici, Giovanni; Scordia, Danilo; Wagner, Moritz; Clifton-Brown, John

2017-01-01

Growth in planted areas of Miscanthus for biomass in Europe has stagnated since 2010 due to technical challenges, economic barriers and environmental concerns. These limitations need to be overcome before biomass production from Miscanthus can expand to several million hectares. In this paper, we consider the economic and environmental effects of introducing seed based hybrids as an alternative to clonal M. x giganteus ( Mxg ). The impact of seed based propagation and novel agronomy was compared with current Mxg cultivation and used in 10 commercially relevant, field scale experiments planted between 2012 and 2014 in the United Kingdom, Germany, and Ukraine. Economic and greenhouse gas (GHG) emissions costs were quantified for the following production chain: propagation, establishment, harvest, transportation, storage, and fuel preparation (excluding soil carbon changes). The production and utilization efficiency of seed and rhizome propagation were compared. Results show that new hybrid seed propagation significantly reduces establishment cost to below £900 ha -1 . Calculated GHG emission costs for the seeds established via plugs, though relatively small, was higher than rhizomes because fossil fuels were assumed to heat glasshouses for raising seedling plugs (5.3 and 1.5 kg CO 2 eq. C Mg [dry matter (DM)] -1 ), respectively. Plastic mulch film reduced establishment time, improving crop economics. The breakeven yield was calculated to be 6 Mg DM ha -1 y -1 , which is about half average United Kingdom yield for Mxg ; with newer seeded hybrids reaching 16 Mg DM ha -1 in second year United Kingdom trials. These combined improvements will significantly increase crop profitability. The trade-offs between costs of production for the preparation of different feedstock formats show that bales are the best option for direct firing with the lowest transport costs (£0.04 Mg -1 km -1 ) and easy on-farm storage. However, if pelleted fuel is required then chip harvesting is more economic. We show how current seed based propagation methods can increase the rate at which Miscanthus can be scaled up; ∼×100 those of current rhizome propagation. These rapid ramp rates for biomass production are required to deliver a scalable and economic Miscanthus biomass fuel whose GHG emissions are ∼1/20th those of natural gas per unit of heat.

Economic and Environmental Assessment of Seed and Rhizome Propagated Miscanthus in the UK

PubMed Central

Hastings, Astley; Mos, Michal; Yesufu, Jalil A.; McCalmont, Jon; Schwarz, Kai; Shafei, Reza; Ashman, Chris; Nunn, Chris; Schuele, Heinrich; Cosentino, Salvatore; Scalici, Giovanni; Scordia, Danilo; Wagner, Moritz; Clifton-Brown, John

2017-01-01

Growth in planted areas of Miscanthus for biomass in Europe has stagnated since 2010 due to technical challenges, economic barriers and environmental concerns. These limitations need to be overcome before biomass production from Miscanthus can expand to several million hectares. In this paper, we consider the economic and environmental effects of introducing seed based hybrids as an alternative to clonal M. x giganteus (Mxg). The impact of seed based propagation and novel agronomy was compared with current Mxg cultivation and used in 10 commercially relevant, field scale experiments planted between 2012 and 2014 in the United Kingdom, Germany, and Ukraine. Economic and greenhouse gas (GHG) emissions costs were quantified for the following production chain: propagation, establishment, harvest, transportation, storage, and fuel preparation (excluding soil carbon changes). The production and utilization efficiency of seed and rhizome propagation were compared. Results show that new hybrid seed propagation significantly reduces establishment cost to below £900 ha-1. Calculated GHG emission costs for the seeds established via plugs, though relatively small, was higher than rhizomes because fossil fuels were assumed to heat glasshouses for raising seedling plugs (5.3 and 1.5 kg CO2 eq. C Mg [dry matter (DM)]-1), respectively. Plastic mulch film reduced establishment time, improving crop economics. The breakeven yield was calculated to be 6 Mg DM ha-1 y-1, which is about half average United Kingdom yield for Mxg; with newer seeded hybrids reaching 16 Mg DM ha-1 in second year United Kingdom trials. These combined improvements will significantly increase crop profitability. The trade-offs between costs of production for the preparation of different feedstock formats show that bales are the best option for direct firing with the lowest transport costs (£0.04 Mg-1 km-1) and easy on-farm storage. However, if pelleted fuel is required then chip harvesting is more economic. We show how current seed based propagation methods can increase the rate at which Miscanthus can be scaled up; ∼×100 those of current rhizome propagation. These rapid ramp rates for biomass production are required to deliver a scalable and economic Miscanthus biomass fuel whose GHG emissions are ∼1/20th those of natural gas per unit of heat. PMID:28713395

Municipal wastewater sludge as a sustainable bioresource in the United States

DOE PAGES

Seiple, Timothy E.; Coleman, André M.; Skaggs, Richard L.

2017-04-20

Within the United States and Puerto Rico, publicly owned treatment works (POTWs) process 130.5 Gl/d (34.5 Bgal/d) of wastewater, producing sludge as a waste product. Emerging technologies offer novel waste-to-energy pathways through whole sludge conversion into biofuels. Assessing the feasibility, scalability and tradeoffs of various energy conversion pathways is difficult in the absence of highly spatially resolved estimates of sludge production. In this study, average wastewater solids concentrations and removal rates, and site specific daily average influent flow are used to estimate site specific annual sludge production on a dry weight basis for >15,000 POTWs. Current beneficial uses, regional productionmore » hotspots and feedstock aggregation potential are also assessed. Analyses indicate 1) POTWs capture 12.56 Tg/y (13.84 MT/y) of dry solids; 2) 50% are not beneficially utilized, and 3) POTWs can support seven regions that aggregate >910 Mg/d (1000 T/d) of sludge within a travel distance of 100 km.« less

The evolving landscape of drug products containing nanomaterials in the United States

NASA Astrophysics Data System (ADS)

D'Mello, Sheetal R.; Cruz, Celia N.; Chen, Mei-Ling; Kapoor, Mamta; Lee, Sau L.; Tyner, Katherine M.

2017-07-01

The Center for Drug Evaluation and Research (CDER) within the US Food and Drug Administration (FDA) is tracking the use of nanotechnology in drug products by building and interrogating a technical profile of products containing nanomaterials submitted to CDER. In this Analysis, data from more than 350 products show an increase in the submissions of drug products containing nanomaterials over the last two decades. Of these, 65% are investigational new drugs, 17% are new drug applications and 18% are abbreviated new drug applications, with the largest class of products being liposomal formulations intended for cancer treatments. Approximately 80% of products have average particle sizes of 300 nm or lower. This analysis identifies several trends in the development of drug products containing nanomaterials, including the relative rate of approvals of these products, and provides a comprehensive overview on the landscape of nanotechnology application in medicine.

[Diagnosis of the productive capacity of the IMSS regarding health technologies].

PubMed

Figueroa-Lara, Alejandro; López-Fernández, Fátima Itzel; López-Domínguez, Adriana; Fajardo-Dolci, German

To quantify the production capacity and performance in research and technological developments of the Mexican Social Security Institute (IMSS). We identified and analyzed information of the legislation, human and financial resources, and infrastructure addressed for research and technological development of IMSS. We analyzed whether the information on the legal framework contained key features to boost research and technological development. Information on the human, financial, and infrastructure resources were obtained from official sources. The research productivity was identified by a bibliometric analysis in 2014; productivity in technological developments was identified by intellectual products. The legal framework of the IMSS has several areas for improvement to boost research and technological development, especially the guidelines for technology transfer. The IMSS has 438 researchers, 39 research units, and a budget of US$ 37.4 million for research and technological development. The rate of articles published per 10 researchers was 4.8; while rate patients was 1.8. The IMSS has a great potential to translate research into technological developments, it is only necessary to make some changes to the legal framework.

Predicting the effects of coastal hypoxia on vital rates of the planktonic copepod Acartia tonsa Dana.

PubMed

Elliott, David T; Pierson, James J; Roman, Michael R

2013-01-01

We describe a model predicting the effects of low environmental oxygen on vital rates (egg production, somatic growth, and mortality) of the coastal planktonic copepod Acartia tonsa. Hypoxic conditions can result in respiration rate being directly limited by oxygen availability. We hypothesized that A. tonsa egg production, somatic growth, and ingestion rates would all respond in a similar manner to low oxygen conditions, as a result of oxygen dependent changes in respiration rate. Rate data for A. tonsa egg production, somatic growth, and ingestion under low environmental oxygen were compiled from the literature and from supplementary experiments. The response of these rates to oxygen was compared by converting all to the analogous units in terms of oxygen utilization, which we termed analogous respiration rate. These analogous respiration rates, along with published measurements of respiration rates, were used to parameterize and evaluate the relationship between A. tonsa respiration rate and environmental oxygen. At 18 °C, our results suggest that A. tonsa experiences sub-lethal effects of hypoxia below an oxygen partial pressure of 8.1 kPa (~3.1 mg L(-1) = 2.3 mL L(-1)). The results of this study can be used to predict the effects of hypoxia on A. tonsa growth and mortality as related to environmental temperature and oxygen partial pressure. Such predictions will be useful as a way to incorporate the effects of coastal hypoxia into population, community, or ecosystem level models that include A. tonsa. This approach can also be used to characterize the effects of hypoxia on other aquatic organisms.

Swine production.

PubMed

Plain, Ronald L; Lawrence, John D

2003-07-01

The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

Slow Off-rates and Strong Product Binding Are Required for Processivity and Efficient Degradation of Recalcitrant Chitin by Family 18 Chitinases*

PubMed Central

Kurašin, Mihhail; Kuusk, Silja; Kuusk, Piret; Sørlie, Morten; Väljamäe, Priit

2015-01-01

Processive glycoside hydrolases are the key components of enzymatic machineries that decompose recalcitrant polysaccharides, such as chitin and cellulose. The intrinsic processivity (PIntr) of cellulases has been shown to be governed by the rate constant of dissociation from polymer chain (koff). However, the reported koff values of cellulases are strongly dependent on the method used for their measurement. Here, we developed a new method for determining koff, based on measuring the exchange rate of the enzyme between a non-labeled and a 14C-labeled polymeric substrate. The method was applied to the study of the processive chitinase ChiA from Serratia marcescens. In parallel, ChiA variants with weaker binding of the N-acetylglucosamine unit either in substrate-binding site −3 (ChiA-W167A) or the product-binding site +1 (ChiA-W275A) were studied. Both ChiA variants showed increased off-rates and lower apparent processivity on α-chitin. The rate of the production of insoluble reducing groups on the reduced α-chitin was an order of magnitude higher than koff, suggesting that the enzyme can initiate several processive runs without leaving the substrate. On crystalline chitin, the general activity of the wild type enzyme was higher, and the difference was magnifying with hydrolysis time. On amorphous chitin, the variants clearly outperformed the wild type. A model is proposed whereby strong interactions with polymer in the substrate-binding sites (low off-rates) and strong binding of the product in the product-binding sites (high pushing potential) are required for the removal of obstacles, like disintegration of chitin microfibrils. PMID:26468285

A Multi-scale Approach for CO2 Accounting and Risk Analysis in CO2 Enhanced Oil Recovery Sites

NASA Astrophysics Data System (ADS)

Dai, Z.; Viswanathan, H. S.; Middleton, R. S.; Pan, F.; Ampomah, W.; Yang, C.; Jia, W.; Lee, S. Y.; McPherson, B. J. O. L.; Grigg, R.; White, M. D.

2015-12-01

Using carbon dioxide in enhanced oil recovery (CO2-EOR) is a promising technology for emissions management because CO2-EOR can dramatically reduce carbon sequestration costs in the absence of greenhouse gas emissions policies that include incentives for carbon capture and storage. This study develops a multi-scale approach to perform CO2 accounting and risk analysis for understanding CO2 storage potential within an EOR environment at the Farnsworth Unit of the Anadarko Basin in northern Texas. A set of geostatistical-based Monte Carlo simulations of CO2-oil-water flow and transport in the Marrow formation are conducted for global sensitivity and statistical analysis of the major risk metrics: CO2 injection rate, CO2 first breakthrough time, CO2 production rate, cumulative net CO2 storage, cumulative oil and CH4 production, and water injection and production rates. A global sensitivity analysis indicates that reservoir permeability, porosity, and thickness are the major intrinsic reservoir parameters that control net CO2 injection/storage and oil/CH4 recovery rates. The well spacing (the distance between the injection and production wells) and the sequence of alternating CO2 and water injection are the major operational parameters for designing an effective five-spot CO2-EOR pattern. The response surface analysis shows that net CO2 injection rate increases with the increasing reservoir thickness, permeability, and porosity. The oil/CH4 production rates are positively correlated to reservoir permeability, porosity and thickness, but negatively correlated to the initial water saturation. The mean and confidence intervals are estimated for quantifying the uncertainty ranges of the risk metrics. The results from this study provide useful insights for understanding the CO2 storage potential and the corresponding risks of commercial-scale CO2-EOR fields.

Slow Off-rates and Strong Product Binding Are Required for Processivity and Efficient Degradation of Recalcitrant Chitin by Family 18 Chitinases.

PubMed

Kurašin, Mihhail; Kuusk, Silja; Kuusk, Piret; Sørlie, Morten; Väljamäe, Priit

2015-11-27

Processive glycoside hydrolases are the key components of enzymatic machineries that decompose recalcitrant polysaccharides, such as chitin and cellulose. The intrinsic processivity (P(Intr)) of cellulases has been shown to be governed by the rate constant of dissociation from polymer chain (koff). However, the reported koff values of cellulases are strongly dependent on the method used for their measurement. Here, we developed a new method for determining koff, based on measuring the exchange rate of the enzyme between a non-labeled and a (14)C-labeled polymeric substrate. The method was applied to the study of the processive chitinase ChiA from Serratia marcescens. In parallel, ChiA variants with weaker binding of the N-acetylglucosamine unit either in substrate-binding site -3 (ChiA-W167A) or the product-binding site +1 (ChiA-W275A) were studied. Both ChiA variants showed increased off-rates and lower apparent processivity on α-chitin. The rate of the production of insoluble reducing groups on the reduced α-chitin was an order of magnitude higher than koff, suggesting that the enzyme can initiate several processive runs without leaving the substrate. On crystalline chitin, the general activity of the wild type enzyme was higher, and the difference was magnifying with hydrolysis time. On amorphous chitin, the variants clearly outperformed the wild type. A model is proposed whereby strong interactions with polymer in the substrate-binding sites (low off-rates) and strong binding of the product in the product-binding sites (high pushing potential) are required for the removal of obstacles, like disintegration of chitin microfibrils. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

Ethylene dynamics in the CELSS biomass production chamber

NASA Technical Reports Server (NTRS)

Rakow, Allen L.

1994-01-01

A material balance model for ethylene was developed and applied retrospectively to data obtained in the Biomass Production Chamber of CELSS in order to calculate true plant production rates of ethylene. Four crops were analyzed: wheat, lettuce, soybean, and potato. The model represents an effort to account for each and every source and sink for ethylene in the system. The major source of ethylene is the plant biomass and the major sink is leakage to the surroundings. The result, expressed in the units of ppd/day, were converted to nl of ethylene per gram of plant dry mass per hour and compare favorably with recent glasshouse to belljar experiments.

Channel specific rate constants for reactions of O(1D) with HCl and HBr

NASA Technical Reports Server (NTRS)

Wine, P. H.; Wells, J. R.; Ravishankara, A. R.

1986-01-01

The absolute rate coefficients and product yields for reactions of O(1D) with HCl(1) and HBr(2) at 287 K are presently determined by means of the time-resolved resonance fluorescence detection of O(3P) and H(2S) in conjunction with pulsed laser photolysis of O3/HX/He mixtures. Total rate coefficients for O(1D) removal are found to be, in units of 10 to the -10th cu cm/molecule per sec, k(1) = 1.50 + or - 0.18 and k(2) 1.48 + or - 0.16; the absolute accuracy of these rate coefficients is estimated to be + or - 20 percent.

Economic productivity by age and sex: 2007 estimates for the United States.

PubMed

Grosse, Scott D; Krueger, Kurt V; Mvundura, Mercy

2009-07-01

Human capital estimates of labor productivity are often used to estimate the economic impact of diseases and injuries that cause incapacitation or death. Estimates of average hourly, annual, and lifetime economic productivity, both market and household, were calculated in 2007 US dollars for 5-year age groups for men, women, and both sexes in the United States. Data from the American Time Use Survey were used to estimate hours of paid work and household services and hourly and annual earnings and household productivity. Present values of discounted lifetime earnings were calculated for each age group using the 2004 US life tables and a discount rate of 3% per year and assuming future productivity growth of 1% per year. The estimates of hours and productivity were calculated using the time diaries of 72,922 persons included in the American Time Use Survey for the years 2003 to 2007. The present value of lifetime productivity is approximately $1.2 million in 2007 dollars for children under 5 years of age. For adults in their 20s and 30s, it is approximately $1.6 million and then it declines with increasing age. Productivity estimates are higher for males than for females, more for market productivity than for total productivity. Changes in hours of paid employment and household services can affect economic productivity by age and sex. This is the first publication to include estimates of household services based on contemporary time use data for the US population.

Factors influencing palmitoyl-CoA oxidation by rat liver peroxisomal fractions. Substrate concentration, organelle integrity and ATP.

PubMed Central

Thomas, J; Debeer, L J; De Schepper, P J; Mannaerts, G P

1980-01-01

1. The first dehydrogenation step of peroxisomal beta-oxidation involves the reduction of O2 to H2O2. Production rates of H2O2 and acetyl units by purified rat liver peroxisomes oxidizing palmitoyl-CoA were equal, indicating that H2O2 production is a reliable index for the release of acetyl units during peroxisomal fatty-acid oxidation. 2. Measurements of H2O2 and acid-soluble oxidation products during [1-14C]palmitoyl-CoA oxidation by purified peroxisomes revealed that the number of acetyl units released per molecule of palmitoyl-CoA oxidized rapidly decreased with increasing unbound palmitoyl-CoA concentrations. Structural damage to the peroxisomes caused by detergents or other treatments also decreased the number of acetyl units released. Under conditions where oxidation proceeded linearly with time the theoretical maximum of 5 acetyl units released per molecule of palmitoyl-CoA oxidized [Lazarow (1978) J. Biol. Chem. 253, 1522--1528] was never reached. 3. Expressed in terms of acetyl units produced and measured at low unbound-palmitoyl-CoA concentrations, mitochondrial oxidation was 10--20-fold higher than peroxisomal oxidation. 4. ATP stimulated peroxisomal palmitoyl-CoA oxidation approx. 2-fold. The ATP effect required the presence of Mg2+ and was lost when peroxisomal membranes were disrupted by Triton X-100 or high concentrations of unbound palmitoyl-CoA. 5. Disruption of peroxisomes by detergents, freeze--thawing, osmotic or mechanical treatment did not stimulate palmitoyl-CoA oxidation in the presence of ATP, indicating that peroxisomal fatty-acid-CoA oxidation was not latent. In the absence of ATP, Triton X-100 stimulated peroxisomal palmitoyl-CoA oxidation approx. 2-fold. PMID:7470063

Estimation of the protein content of US imports of milk protein concentrates.

PubMed

Bailey, K W

2003-12-01

Recent declines in milk prices in the United States have sparked renewed concern that imports of milk protein concentrates (MPC) are increasingly entering the United States with very low tariff rates and is having an adverse impact on the US dairy industry. Milk protein concentrates are used in the United States in many different products, including the starter culture of cheese, or in nonstandard cheeses such as baker's cheese, ricotta, Feta and Hispanic cheese, processed cheese foods, and nutritional products. One of the difficult aspects of trying to assess the impact of MPC imports on the US dairy industry is to quantify the protein content of these imports. The protein content of MPC imports typically ranges from 40 to 88%. The purpose of this study is to develop a methodology that can be used to estimate the protein content of MPC on a country by country basis. Such an estimate would not only provide information regarding the quantity of protein entering the United States, but would also provide a profile of low- and high-value MPC importers. This is critical for market analysis, since it is the lower valued MPC imports that more directly displaces US-produced skim milk powder.

Cataract surgery in Southern Ethiopia: distribution, rates and determinants of service provision.

PubMed

Habtamu, Esmael; Eshete, Zebiba; Burton, Matthew J

2013-11-19

Cataract is the leading cause of blindness worldwide, with the greatest burden found in low-income countries. Cataract surgery is a curative and cost-effective intervention. Despite major non-governmental organization (NGO) support, the cataract surgery performed in Southern Region, Ethiopia is currently insufficient to address the need. We analyzed the distribution, productivity, cost and determinants of cataract surgery services. Confidential interviews were conducted with all eye surgeons (Ophthalmologists & Non-Physician Cataract Surgeons [NPCS]) in Southern Region using semi-structured questionnaires. Eye care project managers were interviewed using open-ended qualitative questionnaires. All eye units were visited. Information on resources, costs, and the rates and determinants of surgical output were collected. Cataract surgery provision is uneven across Southern Region: 66% of the units are within 200 km of the regional capital. Surgeon to population ratios varied widely from 1:70,000 in the capital to no service provision in areas containing 7 million people. The Cataract Surgical Rate (CSR) in 2010 was 406 operations/million/year with zonal CSRs ranging between 204 and 1349. Average number of surgeries performed was 374 operations/surgeon/year. Ophthalmologists and NPCS performed a mean of 682 and 280 cataract operations/surgeon/year, respectively (p = 0.03). Resources are underutilized, at 56% of capacity. Community awareness programs were associated with increased activity (p = 0.009). Several factors were associated with increased surgeon productivity (p < 0.05): working for >2 years, working in a NGO/private clinic, working in an urban unit, having a unit manger, conducting outreach programs and a satisfactory work environment. The average cost of cataract surgery in 2010 was US$141.6 (Range: US$37.6-312.6). Units received >70% of their consumables from NGOs. Mangers identified poor staff motivation, community awareness and limited government support as major challenges. The uneven distribution of infrastructure and personnel, underutilization by the community and inadequate attention and support from the government are limiting cataract surgery service delivery in Southern Ethiopia. Improved human resource management and implementing community-oriented strategies may help increase surgical output and achieve the "Vision 2020: The Right to Sight" targets for treating avoidable blindness.

Production of oxalic acid from sugar beet molasses by formed nitrogen oxides.

PubMed

Gürü, M; Bilgesü, A Y; Pamuk, V

2001-03-01

Production of oxalic acid from sugar beet molasses was developed in a series of three reactors. Nitrogen oxides formed were used to manufacture oxalic acid in the second and third reactor. Parameters affecting the reaction were determined to be, air flow rate, temperature, the amount of V2O5 catalyst and the concentrations of molasses and H2SO4. The maximum yields in the second and third reactors were 78.9% and 74.6% of theoretical yield, respectively. Also, kinetic experiments were performed and the first-order rate constants were determined for the glucose consumption rate. Nitrogen oxides in off-gases from the final reactor were absorbed in water and concentrated sulphuric acid and reused in the following reactors giving slightly lower yields under similar conditions. In this novel way, it was possible to recover NO(x) and to prevent air pollution. Meanwhile, it was possible to reduce the unit cost of reactant for oxalic acid production. A maximum 77.5% and 74.1% of theoretical yield was obtained by using the absorption solutions with NO(x).

Differences on the projective hand test among chronic pain patients reporting three different pain experiences.

PubMed

Panek, Paul E; Skowronski, John J; Wagner, Edwin E

2002-10-01

This study examined personality differences among individuals experiencing 3 different types of pain. The projective Hand Test was administered to 90 individuals who were seeking treatment at a pain clinic in an urban area of the southeast United States. These people were seeking treatment for either arthritis (n = 31), fibromyalgia (n = 29), or migraine headaches (n = 30). A 2 (gender) x 3 (pain group) x Age Group multivariate analysis of variance was conducted using the quantitative Hand Test scoring variables as dependent measures. Results indicated that individuals who were seeking treatment for migraine headaches had a higher production rate of responses involving exhibitionistic displays (EXH) than individuals in the other 2 groups. Individuals who were seeking treatment for fibromyalgia had a higher production rate of responses indicating fear and phobic concerns (FEAR) than individuals in the other 2 groups. Individuals who were seeking treatment for arthritis had a higher production rate of Active (ACT) responses than individuals in the other 2 groups. Possible causes and consequences of these effects are discussed.

Linear extension rates and gross carbonate production of Acropora cervicornis at Coral Gardens, Belize.

NASA Astrophysics Data System (ADS)

Peeling, E.; Greer, L.; Lescinsky, H.; Humston, R.; Wirth, K. R.; Baums, I. B.; Curran, A.

2014-12-01

Branching Acropora coral species have fast growth and carbonate production rates, and thus have functioned as important reef-building species throughout the Pleistocene and Holocene. Recently, net carbonate production (kg CaCO3 m-2 year-1) has been recognized as an important measure of reef health, especially when monitoring endangered species, such as Acropora cervicornis. This study examines carbonate production in a thriving population of A. cervicornis at the Coral Gardens reef in Belize. Photographic surveys were conducted along five transects of A. cervicornis-dominated reefs from 2011-2014. Matching photographs from 2013 and 2014 were scaled to 1 m2 and compared to calculate 84 individual A. cervicornis linear extension rates across the reef. Linear extension rates averaged 12.4 cm/yr and were as high as 17 cm/yr in some areas of the reef. Carbonate production was calculated two ways. The first followed the standard procedure of multiplying percent live coral cover, by the linear extension rate and skeletal density. The second used the number of live coral tips per square meter in place of percent live coral multiplied by the average cross-sectional area of the branches. The standard method yielded a carbonate production rate of 113 kg CaCO3 m-2 year-1 for the reef, and the tip method yielded a rate of 6 kg m-2 year-1. We suggest that the tip method is a more accurate measure of production, because A. cervicornis grows primarily from the live tips, with only limited radial growth and resheeting over dead skeleton. While this method omits the contributions of radial growth and resheeting, and is therefore somewhat of an underestimate, our future work will quantify these aspects of growth in a more complete carbonate budget. Still, our estimate suggests a carbonate production rate per unit area of A. cervicornis that is on par with other Caribbean coral species, rather than two orders of magnitude higher as reported by Perry et al (2013). Although gross coral production at Coral Gardens is high by Caribbean standards, further assessment is required to understand the complete carbonate budget and how well live coral growth may balance bio-erosion or future predicted high CO2 acidification at this site.

Production of aluminum-silicon alloy and ferrosilicon and commercial purity aluminum by the direct reduction process. Second interim technical report, Phase B, December 1, 1978-February 28, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruno, M.J.

1979-03-01

Experimental runs were made to determine the effect of a cooler product reservoir on metal alloy yield and recovery. The reservoir temperature had no significant effect. Difficulties were experienced with operation of an oxygen injected bench scale reactor. Many tests were terminated by burden bridging or flooding of the oxygen tuyeres with metal and slag. Runs were made in which refluxing vapors were condensed in a liquid slag. The addition of CaO decreased the tendency for formation of thick, strong burden bridges but did not completely eliminate bridging. Reduction of flame temperatures did not affect the volatilization rate in themore » bench reactor. Operation of VSR-1 pilot reactor with O injection was achieved after resolving reactor shell leakage problems, by replacing the permeable ceramic shell with impermeable fused silica. Various combustion parameters were investigated, including coke size, burden height and oxygen flow rate. Steady state operation of the oxygen-coke system was attained with smooth burden movement and a 2000/sup 0/C bed temperature in the raceway vicinity. To further reduce heat losses from the raceway area. VSR-1 was redesigned to facilitate locating an induction coil below the oxygen inlets. Further evaluation of effects of impurities on alloy purification in the bench scale unit indicated a 50% decrease in product yield for starting charges containing Fe greater than 5%. Site installation for the entire alloy purification complex was completed. Operations were continued in the bench scale units to obtain design information for the pilot commercial grade Al purification unit. Procurement of construction material was established.« less

Importance of Low Permeability Natural Gas Reservoirs (released in AEO2010)

EIA Publications

2010-01-01

Production from low-permeability reservoirs, including shale gas and tight gas, has become a major source of domestic natural gas supply. In 2008, low-permeability reservoirs accounted for about 40% of natural gas production and about 35% of natural gas consumption in the United States. Permeability is a measure of the rate at which liquids and gases can move through rock. Low-permeability natural gas reservoirs encompass the shale, sandstone, and carbonate formations whose natural permeability is roughly 0.1 millidarcies or below. (Permeability is measured in darcies.)

Renewable Energy Production from DoD Installation Solid Wastes By Anaerobic Digestion

DTIC Science & Technology

2016-08-06

favorable environmental conditions including a mesophilic (37 oC) or thermophilic (55 oC) temperature , the absence of oxygen , and a pH between 6.5...a high temperature process that uses oxygen -starved combustion to convert dry organic matter to a syngas. Syngas is a low BTU fuel that can be used...production rates are at the 36.7 °C digester temperature . Parameter Units 7gCOD/L-d 12gCOD/L-d Effective SRT days 18.5 10.8 COD Conversion Efficiency % 67

Renewable Energy Production from DoD Installation Solid Wastes by Anaerobic Digestion

DTIC Science & Technology

2016-06-01

favorable environmental conditions including a mesophilic (37 oC) or thermophilic (55 oC) temperature , the absence of oxygen , and a pH between 6.5...a high temperature process that uses oxygen -starved combustion to convert dry organic matter to a syngas. Syngas is a low BTU fuel that can be used...production rates are at the 36.7 °C digester temperature . Parameter Units 7gCOD/L-d 12gCOD/L-d Effective SRT days 18.5 10.8 COD Conversion Efficiency % 67

Sustainable Algal Energy Production and Environmental Remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooke, William E.

2012-07-14

Overall, our results confirm that wild algal species sequester a wide range of organic and metal contaminants and excess nutrients (PAHs, trace metals, and nutrients) from natural waters, and suggest parameters that could be useful in predicting uptake rates for algae growing on an algal floway or other algal growth systems in the environment or in industrial processes. The implication for various fuel production processes differ with the detailed unit operations involved, and these results will be of use in the developing of scaling experiments for various types of engineering process designs.

Evaluation of spin freezing versus conventional freezing as part of a continuous pharmaceutical freeze-drying concept for unit doses.

PubMed

De Meyer, L; Van Bockstal, P-J; Corver, J; Vervaet, C; Remon, J P; De Beer, T

2015-12-30

Spin-freezing as alternative freezing approach was evaluated as part of an innovative continuous pharmaceutical freeze-drying concept for unit doses. The aim of this paper was to compare the sublimation rate of spin-frozen vials versus traditionally frozen vials in a batch freeze-dryer, and its impact on total drying time. Five different formulations, each having a different dry cake resistance, were tested. After freezing, the traditionally frozen vials were placed on the shelves while the spin-frozen vials were placed in aluminum vial holders providing radial energy supply during drying. Different primary drying conditions and chamber pressures were evaluated. After 2h of primary drying, the amount of sublimed ice was determined in each vial. Each formulation was monitored in-line using NIR spectroscopy during drying to determine the sublimation endpoint and the influence of drying conditions upon total drying time. For all tested formulations and applied freeze-drying conditions, there was a significant higher sublimation rate in the spin-frozen vials. This can be explained by the larger product surface and the lower importance of product resistance because of the much thinner product layers in the spin frozen vials. The in-line NIR measurements allowed evaluating the influence of applied drying conditions on the drying trajectories. Copyright © 2015 Elsevier B.V. All rights reserved.

Impacts of Electrification of Light-Duty Vehicles in the United States, 2010 - 2017

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gohlke, David; Zhou, Yan

This report examines the sales of plug-in electric vehicles (PEVs) in the United States from 2010 to 2017, exploring vehicle sales, electricity consumption, petroleum reduction, and battery production, among other factors. Over 750,000 PEVs have been sold, driving nearly 16 billion miles on electricity, thereby reducing gasoline consumption by 0.1% in 2016 and 600 million gallons cumulatively through 2017, while using over 5 terawatt-hours of electricity. Over 23 gigawatt-hours of battery capacity has been placed in vehicles, and 98% of this is still on the road, assuming typical scrappage rates.

Joint Peru/United States report on Peru/United States cooperative energy assessment. Volume 2. Annex 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-08-01

An examination of the energy sources of Peru was undertaken by the USA in collaboration with Peru. First, an introduction establishes the purpose and summarizes results, after which the status of energy supply is presented. The ensuing sections contain the contributions of the participating technical specialists, namely: Peru's hydrocarbon potential, estimated reserves, and projected production rates; coal deposits in Peru; geothermal energy; uranium; miscellaneous energy sources; energy-related minerals; water resources in Peru; and geologic hazards in Peru. A separate abstract was prepared for each of the sections. (MCW)

Autumnal Biomass and Potential Productivity of Salt Marsh Fungi from 29° to 43° North Latitude along the United States Atlantic Coast†

PubMed Central

Newell, Steven Y.; Blum, Linda K.; Crawford, Richard E.; Dai, Ting; Dionne, Michele

2000-01-01

It has been established that substantial amounts of fungal mass accumulate in standing decaying smooth cordgrass (Spartina alterniflora) marshes in the southeastern United States (e.g., in standing decaying leaf blades with a total fungal organic mass that accounts for about 20% of the decay system organic mass), but it has been hypothesized that in marshes farther north this is not true. We obtained samples of autumnal standing decaying smooth cordgrass from sites in Florida to Maine over a 3-year period. The variation in latitude could not explain any of the variation in the living fungal standing crop (as determined by ergosterol content) or in the instantaneous rates of fungal growth (as determined by acetate incorporation into ergosterol at a standard temperature, 20°C), which led to the conclusion that the potential levels of fungal production per unit of naturally decaying grass are not different in northern and southern marshes. Twenty-one percent of the variation in the size of the living fungal standing crop could be explained by variation in the C/N ratio (the higher the C/N ratio the smaller the fungal crop), but the C/P ratio was not related to the size of the fungal crop. Instantaneous rates of fungal growth were negatively related to the size of the living fungal crop (r = −0.35), but these rates were not correlated with C/nutrient ratios. The same two predominant species of ascomycetes (one Phaeosphaeria species and one Mycosphaerella species) were found ejecting ascospores from standing decaying smooth cordgrass blades at all of the sites examined from Florida to Maine. PMID:10618221

Direct liquefaction Proof-of-Concept facility. Final technical progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comolli, A.G.; Lee, L.K.; Pradhan, V.R.

1995-08-01

This report presents the results of work which included extensive modifications to HRI`s existing 3 ton per day Process Development Unit (PDU) and completion of the first PDU run. The 58-day Run 1 demonstrated scale-up of the Catalytic Two-Stage Liquefaction (CTSL Process) on Illinois No. 6 coal to produce distillate liquid products at a rate of up to 5 barrels per to of moisture-ash-free coal. The Kerr McGee Rose-SR unit from Wilsonville was redesigned and installed next to the US Filter installation to allow a comparison of the two solids removal systems. Also included was a new enclosed reactor tower,more » upgraded computer controls and a data acquisition system, an alternate power supply, a newly refurbished reactor, an in-line hydrotreater, interstage sampling system, coal handling unit, a new ebullating pump, load cells and improved controls and remodeled preheaters. Distillate liquid yields of 5 barrels/ton of moisture ash free coal were achieved. Coal slurry recycle rates were reduced from the 2--2.5 to 1 ratio demonstrated at Wilsonville to as low as 0.9 to 1. Coal feed rates were increased during the test by 50% while maintaining process performance at a marginally higher reactor severity. Sulfur in the coal was reduced from 4 wt% to ca. 0.02 wt% sulfur in the clean distillate fuel product. More than 3,500 gallons of distillate fuels were collected for evaluation and upgrading studies. The ROSE-SR Process was operated for the first time with a pentane solvent in a steady-state model. The energy rejection of the ash concentrate was consistently below prior data, being as low as 12%, allowing improved liquid yields and recovery.« less

Emissions of organophosphate and brominated flame retardants from selected consumer products and building materials

NASA Astrophysics Data System (ADS)

Kemmlein, Sabine; Hahn, Oliver; Jann, Oliver

The emissions of selected flame retardants were measured in 1- and 0.02-m 3 emission test chambers and 0.001-m 3 emission test cells. Four product groups were of interest: insulating materials, assembly foam, upholstery/mattresses, and electronics equipment. The experiments were performed under constant environmental conditions (23°C, 50% RH) using a fixed sample surface area and controlled air flow rates. Tris (2-chloro-isopropyl)phosphate (TCPP) was observed to be one of the most commonly emitted organophosphate flame retardants in polyurethane foam applications. Depending on the sample type, area-specific emission rates (SER a) of TCPP varied between 20 ng m -2 h -1 and 140 μg m -2 h -1. The emissions from electronic devices were measured at 60°C to simulate operating conditions. Under these conditions, unit specific emission rates (SER u) of organophosphates were determined to be 10-85 ng unit -1 h -1. Increasing the temperature increased the emission of several flame retardants by up to a factor of 500. The results presented in this paper indicate that emissions of several brominated and organophosphate flame retardants are measurable. Polybrominated diphenylethers exhibited an SER a of between 0.2 and 6.6 ng m -2 h -1 and an SER u of between 0.6 and 14.2 ng unit -1 h -1. Because of sink effects, i.e., sorption to chamber components, the emission test chambers and cells used in this study have limited utility for substances low vapour pressures, especially the highly brominated compounds; hexabromocyclododecane had an SER a of between 0.1 and 29 ng m -2 h -1 and decabromodiphenylether was not detectable at all.

The design of RFID convey or belt gate systems using an antenna control unit.

PubMed

Park, Chong Ryol; Lee, Seung Joon; Eom, Ki Hwan

2011-01-01

This paper proposes an efficient management system utilizing a Radio Frequency Identification (RFID) antenna control unit which is moving along with the path of boxes of materials on the conveyor belt by manipulating a motor. The proposed antenna control unit, which is driven by a motor and is located on top of the gate, has an array structure of two antennas with parallel connection. The array structure helps improve the directivity of antenna beam pattern and the readable RFID distance due to its configuration. In the experiments, as the control unit follows moving materials, the reading time has been improved by almost three-fold compared to an RFID system employing conventional fixed antennas. The proposed system also has a recognition rate of over 99% without additional antennas for detecting the sides of a box of materials. The recognition rate meets the conditions recommended by the Electronic Product Code glbal network (EPC)global for commercializing the system, with three antennas at a 20 dBm power of reader and a conveyor belt speed of 3.17 m/s. This will enable a host of new RFID conveyor belt gate systems with increased performance.

The Design of RFID Convey or Belt Gate Systems Using an Antenna Control Unit

PubMed Central

Park, Chong Ryol; Lee, Seung Joon; Eom, Ki Hwan

2011-01-01

This paper proposes an efficient management system utilizing a Radio Frequency Identification (RFID) antenna control unit which is moving along with the path of boxes of materials on the conveyor belt by manipulating a motor. The proposed antenna control unit, which is driven by a motor and is located on top of the gate, has an array structure of two antennas with parallel connection. The array structure helps improve the directivity of antenna beam pattern and the readable RFID distance due to its configuration. In the experiments, as the control unit follows moving materials, the reading time has been improved by almost three-fold compared to an RFID system employing conventional fixed antennas. The proposed system also has a recognition rate of over 99% without additional antennas for detecting the sides of a box of materials. The recognition rate meets the conditions recommended by the Electronic Product Code glbal network (EPC)global for commercializing the system, with three antennas at a 20 dBm power of reader and a conveyor belt speed of 3.17 m/s. This will enable a host of new RFID conveyor belt gate systems with increased performance. PMID:22164119

Amino acid production exceeds plant nitrogen demand in Siberian tundra

NASA Astrophysics Data System (ADS)

Wild, Birgit; Eloy Alves, Ricardo J.; Bárta, Jiři; Čapek, Petr; Gentsch, Norman; Guggenberger, Georg; Hugelius, Gustaf; Knoltsch, Anna; Kuhry, Peter; Lashchinskiy, Nikolay; Mikutta, Robert; Palmtag, Juri; Prommer, Judith; Schnecker, Jörg; Shibistova, Olga; Takriti, Mounir; Urich, Tim; Richter, Andreas

2018-03-01

Arctic plant productivity is often limited by low soil N availability. This has been attributed to slow breakdown of N-containing polymers in litter and soil organic matter (SOM) into smaller, available units, and to shallow plant rooting constrained by permafrost and high soil moisture. Using 15N pool dilution assays, we here quantified gross amino acid and ammonium production rates in 97 active layer samples from four sites across the Siberian Arctic. We found that amino acid production in organic layers alone exceeded literature-based estimates of maximum plant N uptake 17-fold and therefore reject the hypothesis that arctic plant N limitation results from slow SOM breakdown. High microbial N use efficiency in organic layers rather suggests strong competition of microorganisms and plants in the dominant rooting zone. Deeper horizons showed lower amino acid production rates per volume, but also lower microbial N use efficiency. Permafrost thaw together with soil drainage might facilitate deeper plant rooting and uptake of previously inaccessible subsoil N, and thereby promote plant productivity in arctic ecosystems. We conclude that changes in microbial decomposer activity, microbial N utilization and plant root density with soil depth interactively control N availability for plants in the Arctic.

Data report. The fate of human enteric viruses in a natural sewage recycling system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughn, J.M.; Landry, E.F.

1980-09-01

A two-year study was conducted to determine the virus-removing capacity of two man-made ecosystems designed for the treatment of raw domestic wastewater. The first treatment system consisted of two meadows followed by a marsh-pond unit (M/M/P). The second system contained individual marsh and pond units (M/P). All systems demonstrated moderate virus removal, with the marsh/pond system yielding the most consistent removal rates. Within this system, the greater potential for virus removal appeared to occur in the marsh unit. In addition to the production of system-oriented data, improved techniques for the concentration and enumeration of human viruses from sewage-polluted aquatic systemsmore » were developed.« less

Implementation of a large-scale hospital information infrastructure for multi-unit health-care services.

PubMed

Yoo, Sun K; Kim, Dong Keun; Kim, Jung C; Park, Youn Jung; Chang, Byung Chul

2008-01-01

With the increase in demand for high quality medical services, the need for an innovative hospital information system has become essential. An improved system has been implemented in all hospital units of the Yonsei University Health System. Interoperability between multi-units required appropriate hardware infrastructure and software architecture. This large-scale hospital information system encompassed PACS (Picture Archiving and Communications Systems), EMR (Electronic Medical Records) and ERP (Enterprise Resource Planning). It involved two tertiary hospitals and 50 community hospitals. The monthly data production rate by the integrated hospital information system is about 1.8 TByte and the total quantity of data produced so far is about 60 TByte. Large scale information exchange and sharing will be particularly useful for telemedicine applications.

Hair removal-related injuries in the United States, 1991-2014.

PubMed

Swain, Thomas A; Tully, Albert Scott; Redford, Travis; McGwin, Gerald

2016-12-01

Hair removal practices have changed in frequency and location on the body. Previous research on hair removal injuries has focused on a specific body region, age, or gender. This study sought to take a broader perspective of hair removal-associated injuries in the United States which sought treatment at emergency departments. Data from the National Electronic Injury Surveillance System (NEISS) from 1991 to 2014 were used to identify hair removal-related injuries. Incidence rates were determined for the overall population and stratified by gender and age category using US Census Bureau population estimates. From 1991 to 2014, there were an estimated 292 053 hair removal-associated injuries in the United States. The overall incidence rate was highest in 2013 (9/100 000). Those aged 65+ had the highest incidence from 1991 to 2010 with those aged 19-34 having the highest rate starting in 2011. When stratified by body region injured, males had highest injury rates to the face and females had highest rates to the lower limbs. Starting in 2010, those aged 19-34 had higher incidence particularly for pubic and trunk regions. The incidence of hair removal-associated injuries seen by emergency departments increased nearly ninefold between 1991 and 2013. Due to the increased incidence among 19- to 34-year-olds, caution should be taken particularly for this age group when undergoing depilatory practices. Overall, individuals should practice safe and acceptable usage of hair removal products to reduce the risk of injury. © 2016 Wiley Periodicals, Inc.

Mining review

USGS Publications Warehouse

McCartan, L.; Morse, D.E.; Plunkert, P.A.; Sibley, S.F.

2004-01-01

The average annual growth rate of real gross domestic product (GDP) from the third quarter of 2001 through the second quarter of 2003 in the United States was about 2.6 percent. GDP growth rates in the third and fourth quarters of 2003 were about 8 percent and 4 percent, respectively. The upward trends in many sectors of the U.S. economy in 2003, however, were shared by few of the mineral materials industries. Annual output declined in most nonfuel mining and mineral processing industries, although there was an upward turn toward yearend as prices began to increase.

Prove Out of Automated Assembly Line for M564 Delay Arming Mechanisms by Acquisition of 40,000 Units Assembled by Automated Line.

DTIC Science & Technology

1981-01-22

Arsenal Contract DUAA25-69-C- 0301 dated 3-10-69 for "Services to design and develop an automated line for assembly of Safety Adapter, Fuze, 1564...determine the line will function at the design rate of 5,000 acceptable assemblies per day and collect production data for incorporation into final...0,000 M564 Delay Arming Mechanisms of the line: Determine that the line will function at the design rate of 5,000. acceotabie asswml I es/day. Collect

What affects response rates in primary healthcare-based programmes? An analysis of individual and unit-related factors associated with increased odds of non-response based on HCV screening in the general population in Poland.

PubMed

Parda, Natalia; Stępień, Małgorzata; Zakrzewska, Karolina; Madaliński, Kazimierz; Kołakowska, Agnieszka; Godzik, Paulina; Rosińska, Magdalena

2016-12-07

Response rate in public health programmes may be a limiting factor. It is important to first consider their delivery and acceptability for the target. This study aimed at determining individual and unit-related factors associated with increased odds of non-response based on hepatitis C virus screening in primary healthcare. Primary healthcare units (PHCUs) were extracted from the Register of Health Care Centres. Each of the PHCUs was to enrol adult patients selected on a random basis. Data on the recruitment of PHCUs and patients were analysed. Multilevel modelling was applied to investigate individual and unit-related factors associated with non-response. Multilevel logistic model was developed with fixed effects and only a random intercept for the unit. Preliminary analysis included a random effect for unit and each of the individual or PHCU covariates separately. For each of the PHCU covariates, we applied a two-level model with individual covariates, unit random effect and a single fixed effect of this unit covariate. This study was conducted in primary care units in selected provinces in Poland. A total of 242 PHCUs and 24 480 adults were invited. Of them, 44 PHCUs and 20 939 patients agreed to participate. Both PHCUs and patients were randomly selected. Data on 44 PHCUs and 24 480 patients were analysed. PHCU-level factors and recruitment strategies were important predictors of non-response. Unit random effect was significant in all models. Larger and private units reported higher non-response rates, while for those with a history of running public health programmes the odds of non-response was lower. Proactive recruitment, more working hours devoted to the project and patient resulted in higher acceptance of the project. Higher number of personnel had no such effect. Prior to the implementation of public health programme, several factors that could hinder its execution should be addressed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Pulpwood production in the Northeast - 1973

Treesearch

James T. Bones; David R. Dickson

1974-01-01

United States consumption of paper currently stands at 640 pounds per person annually and this rate will no doubt increase if the Nation's economy booms. The pulp and paper industry is approaching a crisis similar to that of the oil industry, because they have expanded the capacity of their existing facilities to the limit and must now get on with the job of...

Establishment of native species on a natural gas pipeline: the importance of seeding rate, aspect, and species selection

Treesearch

Melissa A. Thomas-Van Gundy; Pamela J. Edwards; Thomas M. Schuler

2018-01-01

With the increase in natural gas production in the United States, land managers need solutions and best practices to mitigate potential negative impacts of forest and soil disturbance and meet landowner objectives and desired conditions. Mitigation often includes the use of native seed mixes for maintaining plant diversity, controlling nonnative invasive species, and...

The Crisis of Methamphetamine and Its Management: Preparation, Participation, and Prevention

ERIC Educational Resources Information Center

Cunniff, Judith; Cunniff, Daniel T.; Kay, Kenneth D.

2008-01-01

There is a drug crisis in the United States that is growing at an alarming rate. Its participants work in our businesses, government agencies, and schools. California leads the nation in drug use and until recently, Fresno County was the leader in methamphetamine production. This drug crisis is having a paralyzing effect causing loss of income,…

Characterizing cereal rye biomass and allometric relationships across a range of fall available nitrogen rates in the eastern United States

USDA-ARS?s Scientific Manuscript database

Cereal rye (Secale cereale L.) is the most commonly grown cover crop in the Eastern US due to its winter hardiness, adaptability to a wide array of soil and environmental conditions, and many potential benefits. These benefits hinge in large part on biomass production, which varies according to mult...

Allergic contact dermatitis in preservatives: current standing and future options.

PubMed

Deza, Gustavo; Giménez-Arnau, Ana M

2017-08-01

Preservatives are well known skin sensitizers and represent one of the main causes of contact allergy. The purpose of this article is to review the current state of contact sensitization induced by preservatives and point future alternatives for products' preservation. Isothiazolinones currently are the most common preservatives responsible of contact allergy in Europe and in the United States, and although some regulatory interventions have been taken place, the current contact allergy outbreak is not yet under control. Despite the ban of methyldibromo glutaronitrile from cosmetics in Europe, sensitized patients are still diagnosed, suggesting other nonregulated sources of exposure. Sensitization rates to formaldehyde and formaldehyde-releasers are lower in Europe in comparison with the United States due to stricter regulations regarding their use. Prevalence of contact allergy to parabens has remained stable over the last decades, whereas iodopropynyl butylcarbamate is an emerging allergen with an increasing prevalence. Future alternatives for products' preservation look for a broad antimicrobial spectrum, but with a better safety profile (in terms of sensitization) than the currently available compounds. Given the high rates of sensitization reported over the last years, timely regulatory actions are urgently required for some preservatives that currently represent a concern for public health.

Station blackout at Browns Ferry Unit One: iodine and noble-gas distribution and release

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wichner, R.P.; Weber, C.F.; Lorenz, R.A.

1982-08-01

This is the second volume of a report describing the predicted response of Unit 1 at the Browns Ferry Nuclear Plant to a postulated Station Blackout, defined as a loss of offsite power combined with failure of all onsite emergency diesel-generators to start and load. The Station Blackout is assumed to persist beyond the point of battery exhaustion and the completely powerless state leads to core uncovery, meltdown, reactor vessel failure, and failure of the primary containment by overtemperature-induced degradation of the electrical penetration assembly seals. The sequence of events is described in Volume 1; the material in this volumemore » deals with the analysis of fission product noble gas and iodine transport during the accident. Factors which affect the fission product movements through the series of containment design barriers are reviewed. For a reactive material such as iodine, proper assessment of the rate of movement requires determination of the chemical changes along the pathway which alter the physical properties such as vapor pressure and solubility and thereby affect the transport rate. A methodology for accomplishing this is demonstrated in this report.« less

Synergy effect of naphthenic acid corrosion and sulfur corrosion in crude oil distillation unit

NASA Astrophysics Data System (ADS)

Huang, B. S.; Yin, W. F.; Sang, D. H.; Jiang, Z. Y.

2012-10-01

The synergy effect of naphthenic acid corrosion and sulfur corrosion at high temperature in crude oil distillation unit was studied using Q235 carbon-manganese steel and 316 stainless steel. The corrosion of Q235 and 316 in corrosion media containing sulfur and/or naphthenic acid at 280 °C was investigated by weight loss, scanning electron microscope (SEM), EDS and X-ray diffractometer (XRD) analysis. The results showed that in corrosion media containing only sulfur, the corrosion rate of Q235 and 316 first increased and then decreased with the increase of sulfur content. In corrosion media containing naphthenic acid and sulfur, with the variations of acid value or sulfur content, the synergy effect of naphthenic acid corrosion and sulfur corrosion has a great influence on the corrosion rate of Q235 and 316. It was indicated that the sulfur accelerated naphthenic acid corrosion below a certain sulfur content but prevented naphthenic acid corrosion above that. The corrosion products on two steels after exposure to corrosion media were investigated. The stable Cr5S8 phases detected in the corrosion products film of 316 were considered as the reason why 316 has greater corrosion resistance to that of Q235.

A Simple Method to Detect Recovery of Glomerular Filtration Rate following Acute Kidney Injury

PubMed Central

Pickering, John W.

2014-01-01

In acute kidney injury (AKI), elevated plasma creatinine is diagnostic of an earlier loss of glomerular filtration rate (GFR) but not of the concomitant GFR. Only subsequent creatinine changes will inform if GFR had already recovered or not. We hypothesized that the creatinine excretion rate to production rate ratio would provide this information. A retrospective analysis of 482 critically ill patients from two intensive care units (ICU) is shown. Plasma creatinine was measured on ICU entry and 12 hours later. Four-hour creatinine excretion rates (E) were measured on entry. Creatinine production rates were estimated (eG). The ability of the ratio E/eG to predict a decrease in plasma creatinine concentration, identify recovered AKI (≥0.3 mg/dL decrease), and predict AKI (≥0.3 mg/dL increase) was assessed by the area under the receiver operator characteristic curves (AUC). There was a linear relationship between reduced creatinine concentration and E/eG (r 2 = 0.15; P < 0.0001). E/eG predicted a decrease in creatinine (AUC 0.70 (0.65 to 0.74)), identified recovered AKI (0.75 (0.67 to 0.84)), and predicted AKI (0.80 (0.73 to 0.86)). A ratio of the rates of creatinine excretion to estimated production much less than 1 indicated a concomitant GFR below baseline, whereas a ratio much more than 1 indicated a recovering or recovered GFR. PMID:24982893

Applying probabilistic well-performance parameters to assessments of shale-gas resources

USGS Publications Warehouse

Charpentier, Ronald R.; Cook, Troy

2010-01-01

In assessing continuous oil and gas resources, such as shale gas, it is important to describe not only the ultimately producible volumes, but also the expected well performance. This description is critical to any cost analysis or production scheduling. A probabilistic approach facilitates (1) the inclusion of variability in well performance within a continuous accumulation, and (2) the use of data from developed accumulations as analogs for the assessment of undeveloped accumulations. In assessing continuous oil and gas resources of the United States, the U.S. Geological Survey analyzed production data from many shale-gas accumulations. Analyses of four of these accumulations (the Barnett, Woodford, Fayetteville, and Haynesville shales) are presented here as examples of the variability of well performance. For example, the distribution of initial monthly production rates for Barnett vertical wells shows a noticeable change with time, first increasing because of improved completion practices, then decreasing from a combination of decreased reservoir pressure (in infill wells) and drilling in less productive areas. Within a partially developed accumulation, historical production data from that accumulation can be used to estimate production characteristics of undrilled areas. An understanding of the probabilistic relations between variables, such as between initial production and decline rates, can improve estimates of ultimate production. Time trends or spatial trends in production data can be clarified by plots and maps. The data can also be divided into subsets depending on well-drilling or well-completion techniques, such as vertical in relation to horizontal wells. For hypothetical or lightly developed accumulations, one can either make comparisons to a specific well-developed accumulation or to the entire range of available developed accumulations. Comparison of the distributions of initial monthly production rates of the four shale-gas accumulations that were studied shows substantial overlap. However, because of differences in decline rates among them, the resulting estimated ultimate recovery (EUR) distributions are considerably different.

System Evaluation and Economic Analysis of a HTGR Powered High-Temperature Electrolysis Hydrogen Production Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael G. McKellar; Edwin A. Harvego; Anastasia A. Gandrik

2010-10-01

A design for a commercial-scale high-temperature electrolysis (HTE) plant for hydrogen production has been developed. The HTE plant is powered by a high-temperature gas-cooled reactor (HTGR) whose configuration and operating conditions are based on the latest design parameters planned for the Next Generation Nuclear Plant (NGNP). The current HTGR reference design specifies a reactor power of 600 MWt, with a primary system pressure of 7.0 MPa, and reactor inlet and outlet fluid temperatures of 322°C and 750°C, respectively. The power conversion unit will be a Rankine steam cycle with a power conversion efficiency of 40%. The reference hydrogen production plantmore » operates at a system pressure of 5.0 MPa, and utilizes a steam-sweep system to remove the excess oxygen that is evolved on the anode (oxygen) side of the electrolyzer. The overall system thermal-to-hydrogen production efficiency (based on the higher heating value of the produced hydrogen) is 40.4% at a hydrogen production rate of 1.75 kg/s and an oxygen production rate of 13.8 kg/s. An economic analysis of this plant was performed with realistic financial and cost estimating assumptions. The results of the economic analysis demonstrated that the HTE hydrogen production plant driven by a high-temperature helium-cooled nuclear power plant can deliver hydrogen at a cost of $3.67/kg of hydrogen assuming an internal rate of return, IRR, of 12% and a debt to equity ratio of 80%/20%. A second analysis shows that if the power cycle efficiency increases to 44.4%, the hydrogen production efficiency increases to 42.8% and the hydrogen and oxygen production rates are 1.85 kg/s and 14.6 kg/s respectively. At the higher power cycle efficiency and an IRR of 12% the cost of hydrogen production is $3.50/kg.« less

Range Management Affects Native Ungulate Populations in Península Valdés, a World Natural Heritage

PubMed Central

Nabte, Marcela J.; Marino, Andrea I.; Rodríguez, María Victoria; Monjeau, Adrián; Saba, Sergio L.

2013-01-01

Sheep rearing is the main productive activity in Patagonian rangelands, where guanacos are the only native ungulate. Ranchers perceive a decrease in range carrying capacity as guanaco numbers increase, therefore guanaco conservation within private lands becomes a considerable challenge. This issue is particularly evident in the World Natural Heritage Península Valdés (PV), where there is a need to harmonize livestock production and biodiversity conservation. While sheep rearing prevails as the primary land use in the area, some ecotourism initiatives have been implemented to complement livestock production. In order to study how land use affected guanaco distribution, we characterized PV's ranches in terms of land subdivision, primary productivity, stocking-rate and management type, and assess how these variables affected guanaco encounter rates. Smaller ranches were composed of smaller paddocks (mean size 4.8 km2), which showed higher values of the remote-sensing derived Enhance Vegetation Index (EVI) (mean 0.14) and held higher sheep densities (mean 108.0 sheep/km2), while larger management units (mean size 23.8 km2), showed lower EVI values (mean 0.12) and lower stocking-rates (mean 36.7 sheep/km2). This pattern suggests that primary productivity has been a decisive factor to determine the minimal paddock size set by ranchers in PV, apparently precluding excessive land-subdivision in less productive areas. Guanaco encounter rate, expressed as number of guanacos per travelled kilometre, was inversely related to EVI and stocking-rate. However, land subdivision was the better predictor of guanaco encounter-rate within only sheep ranches, finding more guanacos per kilometre as paddock size increased. In contrast, in ranches where ecotourism was implemented as a complementary activity, guanaco encounter-rates were greater, regardless of paddock size. Our results suggest that the implementation of an additional activity by which landowners derive benefits from wildlife has prompted a beneficial outcome for guanacos, presumably through a decrease in harassment intensity. Finally, we propose possible mechanisms by which land subdivision may affect guanaco distribution and potential alternatives for the inclusion of wildlife conservation in a context of extensive livestock production. PMID:23390546

Range management affects native ungulate populations in Península Valdés, a World Natural Heritage.

PubMed

Nabte, Marcela J; Marino, Andrea I; Rodríguez, María Victoria; Monjeau, Adrián; Saba, Sergio L

2013-01-01

Sheep rearing is the main productive activity in Patagonian rangelands, where guanacos are the only native ungulate. Ranchers perceive a decrease in range carrying capacity as guanaco numbers increase, therefore guanaco conservation within private lands becomes a considerable challenge. This issue is particularly evident in the World Natural Heritage Península Valdés (PV), where there is a need to harmonize livestock production and biodiversity conservation. While sheep rearing prevails as the primary land use in the area, some ecotourism initiatives have been implemented to complement livestock production. In order to study how land use affected guanaco distribution, we characterized PV's ranches in terms of land subdivision, primary productivity, stocking-rate and management type, and assess how these variables affected guanaco encounter rates. Smaller ranches were composed of smaller paddocks (mean size 4.8 km(2)), which showed higher values of the remote-sensing derived Enhance Vegetation Index (EVI) (mean 0.14) and held higher sheep densities (mean 108.0 sheep/km(2)), while larger management units (mean size 23.8 km(2)), showed lower EVI values (mean 0.12) and lower stocking-rates (mean 36.7 sheep/km(2)). This pattern suggests that primary productivity has been a decisive factor to determine the minimal paddock size set by ranchers in PV, apparently precluding excessive land-subdivision in less productive areas. Guanaco encounter rate, expressed as number of guanacos per travelled kilometre, was inversely related to EVI and stocking-rate. However, land subdivision was the better predictor of guanaco encounter-rate within only sheep ranches, finding more guanacos per kilometre as paddock size increased. In contrast, in ranches where ecotourism was implemented as a complementary activity, guanaco encounter-rates were greater, regardless of paddock size. Our results suggest that the implementation of an additional activity by which landowners derive benefits from wildlife has prompted a beneficial outcome for guanacos, presumably through a decrease in harassment intensity. Finally, we propose possible mechanisms by which land subdivision may affect guanaco distribution and potential alternatives for the inclusion of wildlife conservation in a context of extensive livestock production.

The petroleum exponential (again)

NASA Astrophysics Data System (ADS)

Bell, Peter M.

The U.S. production and reserves of liquid and gaseous petroleum have declined since 1960, at least in the lower 48 states. This decline stems from decreased discovery rates, as predicted by M. King Hubbert in the mid-1950's. Hubbert's once unpopular views were based on statistical analysis of the production history of the petroleum industry, and now, even with inclusion of the statistical perturbation caused by the Prudhoe Bay-North Alaskan Slope discovery (the largest oil field ever found in the United States), it seems clear again that production is following the exponential curve to depletion of the resource—to the end of the ultimate yield of petroleum from wells in the United States.In a recent report, C. Hall and C. Cleveland of Cornell University show that large atypical discoveries, such as the Prudhoe Bay find, are but minor influences on what now appears to be the crucial intersection of two exponentials [Science, 211, 576-579, 1981]: the production-per-drilled-foot curve of Hubbert, which crosses zero production no later than the year 2005; the other, a curve that plots the energy cost of drilling and extraction with time; that is, the cost-time rate of how much oil is used to drill and extract oil from the ground. The intersection, if no other discoveries the size of the Prudhoe Bay field are made, could be as early as 1990, the end of the present decade. The inclusion of each Prudhoe-Bay-size find extends the year of intersection by only about 6 years. Beyond that point, more than one barrel of petroleum would be expended for each barrel extracted from the ground. The oil exploration-extraction and refining industry is currently the second most energy-intensive industry in the U.S., and the message seems clear. Either more efficient drilling and production techniques are discovered, or domestic production will cease well before the end of this century if the Hubbert analysis modified by Hall and Cleveland is correct.

Understanding the biological activity of high rate algae ponds through the calculation of oxygen balances.

PubMed

Arbib, Zouhayr; de Godos Crespo, Ignacio; Corona, Enrique Lara; Rogalla, Frank

2017-06-01

Microalgae culture in high rate algae ponds (HRAP) is an environmentally friendly technology for wastewater treatment. However, for the implementation of these systems, a better understanding of the oxygenation potential and the influence of climate conditions is required. In this work, the rates of oxygen production, consumption, and exchange with the atmosphere were calculated under varying conditions of solar irradiance and dilution rate during six months of operation in a real scale unit. This analysis allowed determining the biological response of these dynamic systems. The rates of oxygen consumption measured were considerably higher than the values calculated based on the organic loading rate. The response to light intensity in terms of oxygen production in the bioreactor was described with one of the models proposed for microalgae culture in dense concentrations. This model is based on the availability of light inside the culture and the specific response of microalgae to this parameter. The specific response to solar radiation intensity showed a reasonable stability in spite of the fluctuations due to meteorological conditions. The methodology developed is a useful tool for optimization and prediction of the performance of these systems.

Benchmarking in pathology: development of a benchmarking complexity unit and associated key performance indicators.

PubMed

Neil, Amanda; Pfeffer, Sally; Burnett, Leslie

2013-01-01

This paper details the development of a new type of pathology laboratory productivity unit, the benchmarking complexity unit (BCU). The BCU provides a comparative index of laboratory efficiency, regardless of test mix. It also enables estimation of a measure of how much complex pathology a laboratory performs, and the identification of peer organisations for the purposes of comparison and benchmarking. The BCU is based on the theory that wage rates reflect productivity at the margin. A weighting factor for the ratio of medical to technical staff time was dynamically calculated based on actual participant site data. Given this weighting, a complexity value for each test, at each site, was calculated. The median complexity value (number of BCUs) for that test across all participating sites was taken as its complexity value for the Benchmarking in Pathology Program. The BCU allowed implementation of an unbiased comparison unit and test listing that was found to be a robust indicator of the relative complexity for each test. Employing the BCU data, a number of Key Performance Indicators (KPIs) were developed, including three that address comparative organisational complexity, analytical depth and performance efficiency, respectively. Peer groups were also established using the BCU combined with simple organisational and environmental metrics. The BCU has enabled productivity statistics to be compared between organisations. The BCU corrects for differences in test mix and workload complexity of different organisations and also allows for objective stratification into peer groups.

Some implications of changing patterns of mineral consumption

USGS Publications Warehouse

Menzie, W. David; DeYoung,, John H.; Steblez, Walter G.

2003-01-01

DeYoung and Menzie (1999) examined the relations among population, Gross Domestic Product, and mineral consumption (aluminum, cement, copper, and salt) for Japan, Korea, and the United States between 1965 and 1995. They noted the extremely rapid growth of consumption in Korea between 1975 and 1995. Concomitantly, Korea's population growth rate declined. This paper extends that earlier work by examining patterns of consumption of these same commodities in the twenty most populous countries for the period 1970 through 1995. Developed countries, such as France, Germany, Japan, the United Kingdom, and the United States, show patterns of consumption that are stable (cement, copper, and salt) or grow slowly (aluminum). Some developing countries, including China, Thailand, and Turkey, show more rapid growth of consumption, especially of cement, copper, and aluminum. These changing patterns of mineral consumption in developing countries have important implications -- if they continue, there could be major increases in world mineral consumption and major increases in environmental residuals from mineral production and use. If China reaches the level of consumption of copper of developed countries, world consumption could reach levels more than twice that of 1995 (10.5 million tons).

Predicting the Effects of Coastal Hypoxia on Vital Rates of the Planktonic Copepod Acartia tonsa Dana

PubMed Central

Elliott, David T.; Pierson, James J.; Roman, Michael R.

2013-01-01

We describe a model predicting the effects of low environmental oxygen on vital rates (egg production, somatic growth, and mortality) of the coastal planktonic copepod Acartia tonsa. Hypoxic conditions can result in respiration rate being directly limited by oxygen availability. We hypothesized that A. tonsa egg production, somatic growth, and ingestion rates would all respond in a similar manner to low oxygen conditions, as a result of oxygen dependent changes in respiration rate. Rate data for A. tonsa egg production, somatic growth, and ingestion under low environmental oxygen were compiled from the literature and from supplementary experiments. The response of these rates to oxygen was compared by converting all to the analogous units in terms of oxygen utilization, which we termed analogous respiration rate. These analogous respiration rates, along with published measurements of respiration rates, were used to parameterize and evaluate the relationship between A. tonsa respiration rate and environmental oxygen. At 18°C, our results suggest that A. tonsa experiences sub-lethal effects of hypoxia below an oxygen partial pressure of 8.1 kPa (∼3.1 mg L−1 = 2.3 mL L−1). The results of this study can be used to predict the effects of hypoxia on A. tonsa growth and mortality as related to environmental temperature and oxygen partial pressure. Such predictions will be useful as a way to incorporate the effects of coastal hypoxia into population, community, or ecosystem level models that include A. tonsa. This approach can also be used to characterize the effects of hypoxia on other aquatic organisms. PMID:23691134

Metabolic assessments during extra-vehicular activity.

PubMed

Osipov YuYu; Spichkov, A N; Filipenkov, S N

1998-01-01

Extra-vehicular activity (EVA) has a significant role during extended space flights. It demonstrates that humans can survive and perform useful work outside the Orbital Space Stations (OSS) while wearing protective space suits (SS). When the International Space Station 'Alpha' (ISSA) is fully operational, EVA assembly, installation, maintenance and repair operations will become an everyday repetitive work activity in space. It needs new ergonomic evaluation of the work/rest schedule for an increasing of the labor amount per EVA hour. The metabolism assessment is a helpful method to control the productivity of the EVA astronaut and to optimize the work/rest regime. Three following methods were used in Russia to estimate real-time metabolic rates during EVA: 1. Oxygen consumption, computed from the pressure drop in a high pressure bottle per unit time (with actual thermodynamic oxygen properties under high pressure and oxygen leakage taken into account). 2. Carbon dioxide production, computed from CO2 concentration at the contaminant control cartridge and gas flow rate in the life support subsystem closed loop (nominal mode) or gas leakage in the SS open loop (emergency mode). 3. Heat removal, computed from the difference between the temperatures of coolant water or gas and its flow rate in a unit of time (with assumed humidity and wet oxygen state taken into account). Comparison of heat removal values with metabolic rates enables us to determine the thermal balance during an operative medical control of EVA at "Salyut-6", "Salyut-7" and "Mir" OSS. Complex analysis of metabolism, body temperature and heat rate supports a differential diagnosis between emotional and thermal components of stress during EVA. It gives a prognosis of human homeostasis during EVA. Available information has been acquired into an EVA data base which is an effective tool for ergonomical optimization.

Metabolic assessments during extra-vehicular activity

NASA Astrophysics Data System (ADS)

Osipov, Yu. Yu.; Spichkov, A. N.; Filipenkov, S. N.

Extra-vehicular activity (EVA) has a significant role during extended space flights. It demonstrates that humans can survive and perform useful work outside the Orbital Space Stations (OSS) while wearing protective space suits (SS). When the International Space Station 'Alpha'(ISSA) is fully operational, EVA assembly, installation, maintenance and repair operations will become an everyday repetitive work activity in space. It needs new ergonomic evaluation of the work/rest schedule for an increasing of the labor amount per EVA hour. The metabolism assessment is a helpful method to control the productivity of the EVA astronaut and to optimize the work/rest regime. Three following methods were used in Russia to estimate real-time metabolic rates during EVA: 1. Oxygen consumption, computed from the pressure drop in a high pressure bottle per unit time (with actual thermodynamic oxygen properties under high pressure and oxygen leakage taken into account). 2. Carbon dioxide production, computed from CO 2 concentration at the contaminant control cartridge and gas flow rate in the life support subsystem closed loop (nominal mode) or gas leakage in the SS open loop (emergency mode). 3. Heat removal, computed from the difference between the temperatures of coolant water or gas and its flow rate in a unit of time (with assumed humidity and wet oxygen state taken into account). Comparison of heat removal values with metabolic rates enables us to determine the thermal balance during an operative medical control of EVA at "Salyut-6", "Salyut-7" and "Mir" OSS. Complex analysis of metabolism, body temperature and heat rate supports a differential diagnosis between emotional and thermal components of stress during EVA. It gives a prognosis of human homeostasis during EVA. Available information has been acquired into an EVA data base which is an effective tool for ergonomical optimization.

Improving air pollution control policy in China--A perspective based on cost-benefit analysis.

PubMed

Gao, Jinglei; Yuan, Zengwei; Liu, Xuewei; Xia, Xiaoming; Huang, Xianjin; Dong, Zhanfeng

2016-02-01

To mitigate serious air pollution, the State Council of China promulgated the Air Pollution Prevention and Control Action Plan in 2013. To verify the feasibility and validity of industrial energy-saving and emission-reduction policies in the action plan, we conducted a cost-benefit analysis of implementing these policies in 31 provinces for the period of 2013 to 2017. We also completed a scenario analysis in this study to assess the cost-effectiveness of different measures within the energy-saving and the emission-reduction policies individually. The data were derived from field surveys, statistical yearbooks, government documents, and published literatures. The results show that total cost and total benefit are 118.39 and 748.15 billion Yuan, respectively, and the estimated benefit-cost ratio is 6.32 in the S3 scenario. For all the scenarios, these policies are cost-effective and the eastern region has higher satisfactory values. Furthermore, the end-of-pipe scenario has greater emission reduction potential than energy-saving scenario. We also found that gross domestic product and population are significantly correlated with the benefit-cost ratio value through the regression analysis of selected possible influencing factors. The sensitivity analysis demonstrates that benefit-cost ratio value is more sensitive to unit emission-reduction cost, unit subsidy, growth rate of gross domestic product, and discount rate among all the parameters. Compared with other provinces, the benefit-cost ratios of Beijing and Tianjin are more sensitive to changes of unit subsidy than unit emission-reduction cost. These findings may have significant implications for improving China's air pollution prevention policy. Copyright © 2015 Elsevier B.V. All rights reserved.

Utilization profile of the trauma intensive care unit at the Role 3 Multinational Medical Unit at Kandahar Airfield between May 1 and Oct. 15, 2009

PubMed Central

Shah, Kalpa; Pirie, Steven; Compton, Lisa; McAlister, Vivian; Church, Brian; Kao, Raymond

2011-01-01

Background In the war against the Taliban, Canada was the lead North Atlantic Treaty Organization (NATO) nation to provide medical and surgical care to NATO soldiers, Afghanistan National Army soldiers, Afghanistan Nation Police, civilians working in and outside Kandahar Airfield and Afghanistan civilians at the Role 3 Multinational Medical Unit (R3MMU) from February 2006 to October 2009. Methods We obtained data from the Joint Theatre Trauma Registry between May 1 and Oct. 15, 2009; 188 patients were admitted to the R3MMU intensive care unit (ICU). We analyzed the ICU data according to types and causes of trauma, mechanical ventilation prevalence, ICU medical and surgical complications, blood products utilization, length of stay in the ICU and mortality. Results The admitting services were general surgery (35%), neurosurgery (29%), orthopedic surgery (18%) and internal medicine (3%). Improvised explosive devices (46%) and gunshot wounds (26%) were the main causes of ICU admissions. The mean injury severity score for all patients admitted to the ICU was 37, and 81% of ICU patients required mechanical ventilation for a mean duration of 3 days. The main ICU complications were coagulopathy (6.4%), aspiration pneumonia (4.3%), pneumothorax (3.7%) and wound infection (2.7%). The following blood products were most used: packed red blood cells (55%), fresh frozen plasma (54%), platelets (29%) and cryoprecipitate (23%). The average length of stay in the ICU was 4.3 days, and the survival rate was 93%. Conclusion The high survival rate suggests that ICU care is a necessary and vital resource for a trauma hospital in a war zone. PMID:22099326

Aluminum recycling in the United States in 2000

USGS Publications Warehouse

Plunkert, Patricia A.

2006-01-01

As one of a series of reports on metals recycling, this report discusses the flow of aluminum from production through its uses with particular emphasis on the recycling of industrial scrap (new scrap) and used products (old scrap) in 2000. This materials flow study includes a description of aluminum supply and demand factors for the United States to illustrate the extent of aluminum recycling and to identify recycling trends. Understanding the system of materials flow from source to ultimate disposition can assist in improving the management of natural resources in a manner that is compatible with sound environmental practices. In 2000, the old scrap recycling efficiency for aluminum was estimated to be 42 percent. Almost 60 percent of the aluminum that was recycled in 2000 came from new scrap, and the recycling rate was estimated to be 36 percent. The principal source of old scrap was recycled aluminum beverage cans.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ken L. Stratton

The objective of this project is to investigate the applicability of a combined Global Positioning System and Inertial Measurement Unit (GPS/IMU) for information based displays on earthmoving machines and for automated earthmoving machines in the future. This technology has the potential of allowing an information-based product like Caterpillar's Computer Aided Earthmoving System (CAES) to operate in areas with satellite shading. Satellite shading is an issue in open pit mining because machines are routinely required to operate close to high walls, which reduces significantly the amount of the visible sky to the GPS antenna mounted on the machine. An inertial measurementmore » unit is a product, which provides data for the calculation of position based on sensing accelerations and rotation rates of the machine's rigid body. When this information is coupled with GPS it results in a positioning system that can maintain positioning capability during time periods of shading.« less

Fluorotelomer ethoxylates: sources of highly fluorinated environmental contaminants part I: biotransformation.

PubMed

Frömel, Tobias; Knepper, Thomas P

2010-09-01

Polyethoxylated 2-perfluoroalkylethanols ('fluorotelomer ethoxylates', F-(CF(2)-CF(2)-)(x)-(CH(2)-CH(2)-O)(y)-H, FTEO) are an important class of non-ionic fluorinated surfactants, which have been disregarded as potential source of per- and polyfluorinated organic pollutants despite their high production and application amounts. A commercial mixture of FTEO with a perfluoroalkyl chain length between 6 and 10 carbon atoms and an ethoxymer distribution between 0 and 13 was subjected to a biodegradation test. Monitoring of the aerobic biotransformation process by HPLC-ESI-MS/MS showed that FTEO are rapidly transformed with a half-life of approximately 1d. Structural elucidation of the biotransformation products with the help of hybrid quadrupole--linear ion trap tandem mass spectrometry revealed oxidation to the respective carboxylic acid followed by sequential shortening of ethoxylate units which led to FTEO carboxylates (FTEOC). The conversion rate of FTEOC was found to diminish with decreasing number of ethoxylate units and virtually ceased for compounds with seven intact ethoxy units. These short-chain FTEOC were not further degraded within 48d. Nonetheless, perfluorohexanoic acid (PFHxA) and perfluorooctanoic acid (PFOA) were detected, whose formation is ascribed to degradation of residual fluorotelomer alcohols present in the commercial product. This article represents the first of two parts of a series concerning FTEO. Whilst this part is clearly focused on results of a biodegradation study of FTEO, part two will pinpoint analytical aspects, synthesis of biotransformation products and first evidence of environmental presence of the biotransformation products. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuan Qi; Saunders, Samuel E.; Bartelt-Hunt, Shannon L., E-mail: sbartelt2@unl.edu

Highlights: Black-Right-Pointing-Pointer This study evaluates methane and carbon dioxide production after land burial of cattle carcasses. Black-Right-Pointing-Pointer Disposal of animal mortalities is often overlooked in evaluating the environmental impacts of animal production. Black-Right-Pointing-Pointer we quantify annual emissions from cattle carcass disposal in the United States as 1.6 Tg CO{sub 2} equivalents. - Abstract: Approximately 2.2 million cattle carcasses require disposal annually in the United States. Land burial is a convenient disposal method that has been widely used in animal production for disposal of both daily mortalities as well as during catastrophic mortality events. To date, greenhouse gas production after mortalitymore » burial has not been quantified, and this study represents the first attempt to quantify greenhouse gas emissions from land burial of animal carcasses. In this study, anaerobic decomposition of both homogenized and unhomogenized cattle carcass material was investigated using bench-scale reactors. Maximum yields of methane and carbon dioxide were 0.33 and 0.09 m{sup 3}/kg dry material, respectively, a higher methane yield than that previously reported for municipal solid waste. Variability in methane production rates were observed over time and between reactors. Based on our laboratory data, annual methane emissions from burial of cattle mortalities in the United States could total 1.6 Tg CO{sub 2} equivalents. Although this represents less than 1% of total emissions produced by the agricultural sector in 2009, greenhouse gas emissions from animal carcass burial may be significant if disposal of swine and poultry carcasses is also considered.« less

Occupational safety data and casualty rates for the uranium fuel cycle. [Glossaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Donnell, F.R.; Hoy, H.C.

1981-10-01

Occupational casualty (injuries, illnesses, fatalities, and lost workdays) and production data are presented and used to calculate occupational casualty incidence rates for technologies that make up the uranium fuel cycle, including: mining, milling, conversion, and enrichment of uranium; fabrication of reactor fuel; transportation of uranium and fuel elements; generation of electric power; and transmission of electric power. Each technology is treated in a separate chapter. All data sources are referenced. All steps used to calculate normalized occupational casualty incidence rates from the data are presented. Rates given include fatalities, serious cases, and lost workdays per 100 man-years worked, per 10/supmore » 12/ Btu of energy output, and per other appropriate units of output.« less

Smoking in top-grossing US movies, 2011.

PubMed

Glantz, Stanton A; Iaccopucci, Anne; Titus, Kori; Polansky, Jonathan R

2012-01-01

We reviewed the number of incidents of tobacco use (almost exclusively smoking) depicted in movies in the United States in 2011 to compare that with previously reported trends. We counted use or implied use of a tobacco product by an actor in all movies whose box office gross ranked in the top 10 for at least 1 week. Total tobacco incidents per movie rose 7% from 2010 to 2011, ending 5 years of decline; incidents rose 34% per movie rated G, PG, or PG-13 and 7% per R-rated movie. The reversal of progress toward less onscreen smoking in youth-rated movies underscores the need to rate movies with tobacco imagery as R, establishing an industry-wide market incentive to keep youth-marketed movies tobacco-free.

Bioenergy crop productivity and potential climate change mitigation from marginal lands in the United States: An ecosystem modeling perspective

DOE PAGES

Qin, Zhangcai; Zhuang, Qianlai; Cai, Ximing

2014-06-16

Growing biomass feedstocks from marginal lands is becoming an increasingly attractive choice for producing biofuel as an alternative energy to fossil fuels. Here, we used a biogeochemical model at ecosystem scale to estimate crop productivity and greenhouse gas (GHG) emissions from bioenergy crops grown on marginal lands in the United States. Two broadly tested cellulosic crops, switchgrass, and Miscanthus, were assumed to be grown on the abandoned land and mixed crop–vegetation land with marginal productivity. Production of biomass and biofuel as well as net carbon exchange and nitrous oxide emissions were estimated in a spatially explicit manner. We found that,more » cellulosic crops, especially Miscanthus could produce a considerable amount of biomass, and the effective ethanol yield is high on these marginal lands. For every hectare of marginal land, switchgrass and Miscanthus could produce 1.0–2.3 kl and 2.9–6.9 kl ethanol, respectively, depending on nitrogen fertilization rate and biofuel conversion efficiency. Nationally, both crop systems act as net GHG sources. Switchgrass has high global warming intensity (100–390 g CO 2eq l –1 ethanol), in terms of GHG emissions per unit ethanol produced. Miscanthus, however, emits only 21–36 g CO 2eq to produce every liter of ethanol. To reach the mandated cellulosic ethanol target in the United States, growing Miscanthus on the marginal lands could potentially save land and reduce GHG emissions in comparison to growing switchgrass. Furthermore, the ecosystem modeling is still limited by data availability and model deficiencies, further efforts should be made to classify crop–specific marginal land availability, improve model structure, and better integrate ecosystem modeling into life cycle assessment.« less

19 CFR 145.35 - United States products returned.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false United States products returned. 145.35 Section... OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Special Classes of Merchandise § 145.35 United States products returned. Products of the United States returned after having been exported, which have not been...

19 CFR 145.35 - United States products returned.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false United States products returned. 145.35 Section... OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Special Classes of Merchandise § 145.35 United States products returned. Products of the United States returned after having been exported, which have not been...

19 CFR 145.35 - United States products returned.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false United States products returned. 145.35 Section... OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Special Classes of Merchandise § 145.35 United States products returned. Products of the United States returned after having been exported, which have not been...

19 CFR 145.35 - United States products returned.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false United States products returned. 145.35 Section... OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Special Classes of Merchandise § 145.35 United States products returned. Products of the United States returned after having been exported, which have not been...

19 CFR 145.35 - United States products returned.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false United States products returned. 145.35 Section... OF THE TREASURY (CONTINUED) MAIL IMPORTATIONS Special Classes of Merchandise § 145.35 United States products returned. Products of the United States returned after having been exported, which have not been...

Association Between Direct-to-Consumer Advertising and Testosterone Testing and Initiation in the United States, 2009-2013.

PubMed

Layton, J Bradley; Kim, Yoonsang; Alexander, G Caleb; Emery, Sherry L

2017-03-21

Testosterone initiation increased substantially in the United States from 2000 to 2013, especially among men without clear indications. Direct-to-consumer advertising (DTCA) also increased during this time. To investigate associations between televised DTCA and testosterone testing and initiation in the United States. Ecologic study conducted in designated market areas (DMAs) in the United States. Monthly testosterone advertising ratings were linked to DMA-level testosterone use data from 2009-2013 derived from commercial insurance claims. Associations between DTCA and testosterone testing, initiation, and initiation without recent baseline tests were estimated using Poisson generalized estimating equations. Monthly Nielsen ratings for testosterone DTCA in the 75 largest DMAs. (1) Rates of new serum testosterone testing; (2) rates of testosterone initiation (in-office injection, surgical implant, or pharmacy dispensing) for all testosterone products combined and for specific brands; and (3) rates of testosterone initiation without recent serum testosterone testing. Of 17 228 599 commercially insured men in the 75 DMAs, 1 007 990 (mean age, 49.6 [SD, 11.5] years) had new serum testosterone tests and 283 317 (mean age, 51.8 [SD, 11.3] years) initiated testosterone treatment. Advertising intensity varied by geographic region and time, with the highest intensity seen in the southeastern United States and with months ranging from no ad exposures to a mean of 13.6 exposures per household. Nonbranded advertisements were common prior to 2012, with branded advertisements becoming more common during and after 2012. Each household advertisement exposure was associated with a monthly increase in rates of new testosterone testing (rate ratio [RR], 1.006; 95% CI, 1.004-1.008), initiation (RR, 1.007; 95% CI, 1.004-1.010), and initiation without a recent test (RR, 1.008; 95% CI, 1.002-1.013). Mean absolute rate increases were 0.14 tests (95% CI, 0.09-0.19), 0.05 new initiations (95% CI, 0.03-0.08), and 0.02 initiations without a recent test (95% CI, 0.01-0.03) per 10 000 men for each monthly ad exposure over the entire period. Among US men residing in the 75 designated market areas, regional exposure to televised direct-to-consumer advertising was associated with greater testosterone testing, new initiation, and initiation without recent testing.

Continuous D-tagatose production by immobilized thermostable L-arabinose isomerase in a packed-bed bioreactor.

PubMed

Ryu, Se-Ah; Kim, Chang Sup; Kim, Hye-Jung; Baek, Dae Heoun; Oh, Deok-Kun

2003-01-01

D-Tagatose was continuously produced using thermostable L-arabinose isomerase immobilized in alginate with D-galactose solution in a packed-bed bioreactor. Bead size, L/D (length/diameter) of reactor, dilution rate, total loaded enzyme amount, and substrate concentration were found to be optimal at 0.8 mm, 520/7 mm, 0.375 h(-1), 5.65 units, and 300 g/L, respectively. Under these conditions, the bioreactor produced about 145 g/L tagatose with an average productivity of 54 g tagatose/L x h and an average conversion yield of 48% (w/w). Operational stability of the immobilized enzyme was demonstrated, with a tagatose production half-life of 24 days.

Energy resources available to the United States, 1985 to 2000.

PubMed

Hayes, E T

1979-01-19

Energy and the gross national product have grown hand in hand at 3 to 3(1/2) percent a year for almost 40 years. Our energy growth is slowing down and will sentially level off in the 1990's. Our production of oil and gas passed a peak in the early 1970's, and there is no resource base to justify predictions of increased yields. Coal is the only fossil fuel capable of increased production. There are serious doubts that our uranium resources can support a large light-water reactor program. Finding rates for petroleum, natural gas, and uranium are less than half of what they were 20 years ago.

A Prospective, Descriptive, Quality Improvement Study to Decrease Incontinence-Associated Dermatitis and Hospital-Acquired Pressure Ulcers.

PubMed

Hall, Kimberly D; Clark, Rebecca C

2015-07-01

Incontinence is a common problem among hospitalized patients and has been associated with multiple health complications, including incontinence-associated dermatitis (IAD) and hospital-acquired pressure ulcers (HAPUs). A prospective, descriptive study was conducted in 2 acute care neurology units to 1) assess the prevalence of incontinence and incidence of IAD and HAPUs among incontinent patients, and 2) evaluate the effect of caregiver education and use of a 1-step cleanser, moisturizer, barrier product on the development of IAD and HAPUs among patients with incontinence. During a period of 1 month, the incontinence status of admitted patients was recorded and skin was assessed for the presence/absence of IAD and HAPUs twice per day. After the 1-month data collection, all clinicians on the study units completed a facility-based online education program about IAD, HAPUs, and skin care followed by the implementation of a 1-step cleanser/barrier product for skin care of all patients with incontinence. Data collection procedures remained the same. Data were collected using a paper/pencil instrument and entered into a spreadsheet for analysis. Descriptive statistics were calculated and prevalence and incidence rates were compared between the pre-intervention and post-intervention phase using Fisher's exact analysis. During the first phase of the study, 17 of 40 admitted patients (42.5%) were incontinent. Of those, 5 (29.4%) developed IAD and all of these patients developed HAPUs (5 of 40 admitted, 29.4%) during an average length of stay of 7.3 (range: 2-14) days. In the intervention phase of the study, 25 of 46 (54.3%) patients were incontinent and none developed IAD or a HAPU during an average length of stay of 7.4 (range: 2-14) days. The average Braden scale score was 14.14 in the pre-intervention group of patients with incontinence and 12.74 in the intervention group. The prevalence of incontinence among patients admitted to acute care neurology units and the rate of IAD in these populations is high. After educating clinicians and implementing incontinence care procedures with a 1-step product, the rate of HAPUs decreased significantly but the rate of IADs remained the same. Clinicians should consider the results of this and other studies when developing incontinence-care protocols. Controlled clinical studies utilizing more detailed IAD assessments will help elucidate these observations.

An innovative sewage sludge reduction by using a combined mesophilic anaerobic and thermophilic aerobic process with thermal-alkaline treatment and sludge recirculation.

PubMed

Cho, Hyun Uk; Park, Sang Kyu; Ha, Jeong Hyub; Park, Jong Moon

2013-11-15

Lab-scale High Efficiency Digestion (HED) systems containing a Mesophilic Anaerobic Reactor (MAR), Thermophilic Aerobic Reactor (TAR), liquid/solid separation unit, and thermal-alkaline treatment were developed to evaluate the efficiencies of sludge reduction and methane production. The HED process was divided into three phases to examine the influence of sludge pretreatment and pretreated sludge recirculation using TCOD and VSS reduction, COD solubilization, and methane production. The VSS removal with a solid/liquid separation unit, sludge recirculation, and thermal-alkaline treatment drastically increased up to 95% compared to the feed concentration. In addition, the results of COD solubilization and VSS/TSS showed that the solubilization of cells and organic matters by the thermal-alkaline treatment was highly increased, which was also consistent with the SEM images. In particular, the methane production rate increased 24-fold when the feed sludge and recirculated sludge were pretreated together. Collectively, the HED experiments performed with sludge recirculation and thermal-alkaline treatment demonstrated that the HED systems can be successfully employed for highly efficient sewage sludge reduction and methane gas production. Copyright © 2013 Elsevier Ltd. All rights reserved.

A comparison of protein A chromatographic stationary phases: performance characteristics for monoclonal antibody purification.

PubMed

Liu, Zhuo; Mostafa, Sigma S; Shukla, Abhinav A

2015-01-01

Protein A chromatography remains the dominant capture step used during the downstream purification of monoclonal antibodies (mAbs). With the recent expiry of the Repligen patent on recombinant Protein A, a variety of new Protein A resins have been introduced in the market. Given productivity limitations during downstream processing that have come into sharper focus with the recent increase in cell culture titers for mAbs, the selection of an appropriate Protein A resin has direct implications on the overall process economics of mAb production. The performance of seven different Protein A chromatographic resins was compared with respect to static binding capacity and dynamic binding capacity as a function of flow rate. This data was translated into a comparison of productivity (g mAb purified per unit resin volume per unit time) for the seven stationary phases. In addition, elution pH and host cell protein impurity levels after product capture on each of these resins were determined. The current article provides an effective methodology and dataset for the selection of the optimal Protein A chromatographic resin. © 2014 International Union of Biochemistry and Molecular Biology, Inc.

Effects of organic loading rate on biogas production from macroalgae: Performance and microbial community structure.

PubMed

Sun, Meng-Ting; Fan, Xiao-Lei; Zhao, Xiao-Xian; Fu, Shan-Fei; He, Shuai; Manasa, M R K; Guo, Rong-Bo

2017-07-01

Macroalgae biomass has been considered as a promising feedstock for biogas production. In order to improve the efficiency of anaerobic digestion (AD) of macroalgae, semi-continuous fermentation was conducted to examine the effects of organic loading rate (OLR) on biogas production from Macrocystis pyrifer. Results showed that, under OLRs of 1.37, 2.74, 4.12 and 6.85kgVS substrate /(m 3 ·d), the average unit biogas yields were 438.9, 477.3, 480.1 and 188.7mL/(gVS substrate d), respectively. It indicated that biogas production was promoted by the increased OLR in an appropriate range while inhibited by the OLR beyond the appropriate range. The investigation on physical-chemical parameters revealed that unfavorable VFAs concentration, pH and salinity might be the main causes for system failure due to the overrange OLR, while the total phenols failed to reach the inhibitory concentration. Microbial community analysis demonstrated that several bacterial and archaeal phyla altered with increase in OLR apparently. Copyright © 2017 Elsevier Ltd. All rights reserved.

Linear units improve articulation between social and physical constructs: An example from caregiver parameterization for children supported by complex medical technologies

NASA Astrophysics Data System (ADS)

Bezruczko, N.; Stanley, T.; Battle, M.; Latty, C.

2016-11-01

Despite broad sweeping pronouncements by international research organizations that social sciences are being integrated into global research programs, little attention has been directed toward obstacles blocking productive collaborations. In particular, social sciences routinely implement nonlinear, ordinal measures, which fundamentally inhibit integration with overarching scientific paradigms. The widely promoted general linear model in contemporary social science methods is largely based on untransformed scores and ratings, which are neither objective nor linear. This issue has historically separated physical and social sciences, which this report now asserts is unnecessary. In this research, nonlinear, subjective caregiver ratings of confidence to care for children supported by complex, medical technologies were transformed to an objective scale defined by logits (N=70). Transparent linear units from this transformation provided foundational insights into measurement properties of a social- humanistic caregiving construct, which clarified physical and social caregiver implications. Parameterized items and ratings were also subjected to multivariate hierarchical analysis, then decomposed to demonstrate theoretical coherence (R2 >.50), which provided further support for convergence of mathematical parameterization, physical expectations, and a social-humanistic construct. These results present substantial support for improving integration of social sciences with contemporary scientific research programs by emphasizing construction of common variables with objective, linear units.

Evaluation of fermentation kinetics of acid-treated corn cob hydrolysate for xylose fermentation in the presence of acetic acid by Pichia stipitis.

PubMed

Kashid, Mohan; Ghosalkar, Anand

2017-08-01

The efficient utilization of lignocellulosic biomass for ethanol production depends on the fermentability of the biomass hydrolysate obtained after pretreatment. In this work we evaluated the kinetics of ethanol production from xylose using Pichia stipitis in acid-treated corn cob hydrolysate. Acetic acid is one of the main inhibitors in corn cob hydrolysate that negatively impacts kinetics of xylose fermentation by P. stipitis. Unstructured kinetic model has been formulated that describes cell mass growth and ethanol production as a function of xylose, oxygen, ethanol, and acetic acid concentration. Kinetic parameters were estimated under different operating conditions affecting xylose fermentation. This is the first report on kinetics of xylose fermentation by P. stipitis which includes inhibition of acetic acid on growth and product formation. In the presence of acetic acid in the hydrolysate, the model accurately predicted reduction in maximum specific growth rate (from 0.23 to 0.15 h -1 ) and increase in ethanol yield per unit biomass (from 3 to 6.2 gg -1 ), which was also observed during experimental trials. Presence of acetic acid in the fermentation led to significant reduction in the cell growth rate, reduction in xylose consumption and ethanol production rate. The developed model accurately described physiological state of P. stipitis during corn cob hydrolysate fermentation. Proposed model can be used to predict the influence of xylose, ethanol, oxygen, and acetic acid concentration on cell growth and ethanol productivity in industrial fermentation.

Increased river alkalinization in the Eastern U.S.

PubMed

Kaushal, Sujay S; Likens, Gene E; Utz, Ryan M; Pace, Michael L; Grese, Melissa; Yepsen, Metthea

2013-09-17

The interaction between human activities and watershed geology is accelerating long-term changes in the carbon cycle of rivers. We evaluated changes in bicarbonate alkalinity, a product of chemical weathering, and tested for long-term trends at 97 sites in the eastern United States draining over 260,000 km(2). We observed statistically significant increasing trends in alkalinity at 62 of the 97 sites, while remaining sites exhibited no significant decreasing trends. Over 50% of study sites also had statistically significant increasing trends in concentrations of calcium (another product of chemical weathering) where data were available. River alkalinization rates were significantly related to watershed carbonate lithology, acid deposition, and topography. These three variables explained ~40% of variation in river alkalinization rates. The strongest predictor of river alkalinization rates was carbonate lithology. The most rapid rates of river alkalinization occurred at sites with highest inputs of acid deposition and highest elevation. The rise of alkalinity in many rivers throughout the Eastern U.S. suggests human-accelerated chemical weathering, in addition to previously documented impacts of mining and land use. Increased river alkalinization has major environmental implications including impacts on water hardness and salinization of drinking water, alterations of air-water exchange of CO2, coastal ocean acidification, and the influence of bicarbonate availability on primary production.

Mitigating an increase of specific power consumption in a cryogenic air separation unit at reduced oxygen production

NASA Astrophysics Data System (ADS)

Singla, Rohit; Chowdhury, Kanchan

2017-02-01

Specific power consumed in a Linde double column air separation unit (ASU) increases as the quantity of oxygen produced at a given purity is decreased due to the changes of system requirement or market demand. As the plant operates in part load condition, the specific power consumption (SPC) increases as the total power consumption remains the same. In order to mitigate the increase of SPC at lower oxygen production, the operating pressure of high pressure column (HPC) can be lowered by extending the low pressure column (LPC) by a few trays and adding a second reboiler. As the duty of second reboiler in LPC is increased, the recovery of oxygen decreases with a lowering of the HPC pressure. This results in mitigation of the increase of SPC of the plant. A Medium pressure ASU with dual reboiler that produces pressurised gaseous and liquid products of oxygen and nitrogen is simulated in Aspen Hysys 8.6®, a commercial process simulator to determine SPC at varying oxygen production. The effects of reduced pressure of air feed into the cold box on the size of heat exchangers (HX) are analysed. Operation strategy to obtain various oxygen production rates at varying demand is also proposed.

Entropy production and optimization of geothermal power plants

NASA Astrophysics Data System (ADS)

Michaelides, Efstathios E.

2012-09-01

Geothermal power plants are currently producing reliable and low-cost, base load electricity. Three basic types of geothermal power plants are currently in operation: single-flashing, dual-flashing, and binary power plants. Typically, the single-flashing and dual-flashing geothermal power plants utilize geothermal water (brine) at temperatures in the range of 550-430 K. Binary units utilize geothermal resources at lower temperatures, typically 450-380 K. The entropy production in the various components of the three types of geothermal power plants determines the efficiency of the plants. It is axiomatic that a lower entropy production would improve significantly the energy utilization factor of the corresponding power plant. For this reason, the entropy production in the major components of the three types of geothermal power plants has been calculated. It was observed that binary power plants generate the lowest amount of entropy and, thus, convert the highest rate of geothermal energy into mechanical energy. The single-flashing units generate the highest amount of entropy, primarily because they re-inject fluid at relatively high temperature. The calculations for entropy production provide information on the equipment where the highest irreversibilities occur, and may be used to optimize the design of geothermal processes in future geothermal power plants and thermal cycles used for the harnessing of geothermal energy.

Cost of high prevalence mental disorders: Findings from the 2007 Australian National Survey of Mental Health and Wellbeing.

PubMed

Lee, Yu-Chen; Chatterton, Mary Lou; Magnus, Anne; Mohebbi, Mohammadreza; Le, Long Khanh-Dao; Mihalopoulos, Cathrine

2017-12-01

The aim of this project was to detail the costs associated with the high prevalence mental disorders (depression, anxiety-related and substance use) in Australia, using community-based, nationally representative survey data. Respondents diagnosed, within the preceding 12 months, with high prevalence mental disorders using the Confidentialised Unit Record Files of the 2007 National Survey of Mental Health and Wellbeing were analysed. The use of healthcare resources (hospitalisations, consultations and medications), productivity loss, income tax loss and welfare benefits were estimated. Unit costs of healthcare services were obtained from the Independent Hospital Pricing Authority, Medicare and Pharmaceutical Benefits Scheme. Labour participation rates and unemployment rates were determined from the National Survey of Mental Health and Wellbeing. Daily wage rates adjusted by age and sex were obtained from Australian Bureau of Statistics and used to estimate productivity losses. Income tax loss was estimated based on the Australian Taxation Office rates. The average cost of commonly received Government welfare benefits adjusted by age was used to estimate welfare payments. All estimates were expressed in 2013-2014 AUD and presented from multiple perspectives including public sector, individuals, private insurers, health sector and societal. The average annual treatment cost for people seeking treatment was AUD660 (public), AUD195 (individual), AUD1058 (private) and AUD845 from the health sector's perspective. The total annual healthcare cost was estimated at AUD974m, consisting of AUD700m to the public sector, AUD168m to individuals, and AUD107m to the private sector. The total annual productivity loss attributed to the population with high prevalence mental disorders was estimated at AUD11.8b, coupled with the yearly income tax loss at AUD1.23b and welfare payments at AUD12.9b. The population with high prevalence mental disorders not only incurs substantial cost to the Australian healthcare system but also large economic losses to society.

Economic indicators selection for crime rates forecasting using cooperative feature selection

NASA Astrophysics Data System (ADS)

Alwee, Razana; Shamsuddin, Siti Mariyam Hj; Salleh Sallehuddin, Roselina

2013-04-01

Features selection in multivariate forecasting model is very important to ensure that the model is accurate. The purpose of this study is to apply the Cooperative Feature Selection method for features selection. The features are economic indicators that will be used in crime rate forecasting model. The Cooperative Feature Selection combines grey relational analysis and artificial neural network to establish a cooperative model that can rank and select the significant economic indicators. Grey relational analysis is used to select the best data series to represent each economic indicator and is also used to rank the economic indicators according to its importance to the crime rate. After that, the artificial neural network is used to select the significant economic indicators for forecasting the crime rates. In this study, we used economic indicators of unemployment rate, consumer price index, gross domestic product and consumer sentiment index, as well as data rates of property crime and violent crime for the United States. Levenberg-Marquardt neural network is used in this study. From our experiments, we found that consumer price index is an important economic indicator that has a significant influence on the violent crime rate. While for property crime rate, the gross domestic product, unemployment rate and consumer price index are the influential economic indicators. The Cooperative Feature Selection is also found to produce smaller errors as compared to Multiple Linear Regression in forecasting property and violent crime rates.

Heat-power working regimes of a high-frequency (0.44 MHz) 1000-kW induction plasmatron

NASA Astrophysics Data System (ADS)

Gorbanenko, V. M.; Farnasov, G. A.; Lisafin, A. B.

2015-12-01

The energy working regimes of a superpower high-frequency induction (HFI) plasmatron with a high-frequency (HF) generator are studied. The HFI plasmatron with a power of 1000 kVA and a working frequency of 440 kHz, in which air is used as a plasma-forming gas, can be used for treatment of various oxide powder materials. The energy regimes substantially influence finish products and their costs. Various working regimes of the HFI plasma unit and the following characteristics are studied: the dependence of the vibration power on the anode power, the dependence of the power losses on the anode power at various of plasma-forming gas flow rates, and the coefficients of efficiency of the plasmatron and the HFI-plasma unit at various powers. The effect of the plasma-forming gas flow rate on the bulk temperature is determined.

Youth tobacco product use in the United States.

PubMed

Lee, Youn Ok; Hebert, Christine J; Nonnemaker, James M; Kim, Annice E

2015-03-01

Noncigarette tobacco products are increasingly popular among youth, especially cigarette smokers. Understanding multiple tobacco product use is necessary to assess the effects of tobacco products on population health. This study examines multiple tobacco product use and associated risk factors among US youth. Estimates of current use were calculated for cigarettes, cigars, smokeless tobacco, hookah, e-cigarettes, pipes, bidis, kreteks, snus, and dissolvable tobacco by using data from the 2012 National Youth Tobacco Survey (n = 24 658), a nationally representative sample of US middle and high school students. Associations between use patterns and demographic characteristics were examined by using multinomial logistic regression. Among youth, 14.7% currently use 1 or more tobacco products. Of these, 2.8% use cigarettes exclusively, and 4% use 1 noncigarette product exclusively; 2.7% use cigarettes with another product (dual use), and 4.3% use 3 or more products (polytobacco use). Twice as many youth use e-cigarettes alone than dual use with cigarettes. Among smokers, polytobacco use was significantly associated with male gender (adjusted relative risk ratio [aRRR] = 3.71), by using flavored products (aRRR = 6.09), nicotine dependence (aRRR = 1.91), tobacco marketing receptivity (aRRR = 2.52), and perceived prevalence of peer use of tobacco products (aRRR = 3.61, 5.73). More than twice as many youth in the United States currently use 2 or more tobacco products than cigarettes alone. Continued monitoring of tobacco use patterns is warranted, especially for e-cigarettes. Youth rates of multiple product use involving combustible products underscore needs for research assessing potential harms associated with these patterns. Copyright © 2015 by the American Academy of Pediatrics.

International strategic minerals inventory summary report; zirconium

USGS Publications Warehouse

Towner, R.R.

1992-01-01

Zircon, a zirconium silicate, is currently the most important commercial zirconium-bearing mineral. Baddeleyite, a natural form of zirconia, is less important but has some specific end uses. Both zircon and baddeleyite occur in hard-rock and placer deposits, but at present all zircon production is from placer deposits. Most baddeleyite production is from hard-rock deposits, principally as a byproduct of copper and phosphate-rock mining. World zirconium resources in identified, economically exploitable deposits are about 46 times current production rates. Of these resources, some 71 percent are in South Africa, Australia, and the United States. The principal end uses of zirconium minerals are in ceramic applications and as refractories, abrasives, and mold linings in foundries. A minor amount, mainly of zircon, is used for the production of hafnium-free zirconium metal, which is used principally for sheathing fuel elements in nuclear reactors and in the chemical-processing industry, aerospace engineering, and electronics. Australia and South Africa are the largest zircon producers and account for more than 70 percent of world output; the United States and the Soviet Union account for another 20 percent. South Africa accounts for almost all the world's production of baddeleyite, which is about 2 percent of world production of contained zirconia. Australia and South Africa are the largest exporters of zircon. Unless major new deposits are developed in countries that have not traditionally produced zircon, the pattern of world production is unlikely to change by 2020. The proportions, however, of production that come from existing producing countries may change somewhat.

P-8A Poseidon Multi-Mission Maritime Aircraft (P-8A)

DTIC Science & Technology

2013-12-01

NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...2013 rated the P-8A as operationally effective , operationally suitable, and recommended Fleet introduction. Integrated testing of deficiency...lot through effective negotiations with the prime contractor and through development and implementation of production process improvement

The Northern Forest Futures Project: A forward look at forest conditions in the northern United States

Treesearch

W. Keith Moser; Stephen R. Shifley

2012-01-01

Forests and forest ecosystems provide a critical array of benefits, from clean air and water to commercial products to open space. The forests and their ability to provide desired benefi ts constantly change in response to natural forces, human decisions, and human needs. The complexity and rate of change demand a rigorous evaluation of existing and emerging natural...

Quantitative Easing and the Fed: Ghost Story II

ERIC Educational Resources Information Center

Niederjohn, M. Scott; Schug, Mark C.; Wood, William C.

2011-01-01

The U.S. economy today has been in recovery since 2009. But nearly everyone agrees that the recovery is anemic--too slow to reduce the high level of unemployment. Real Gross Domestic Product (GDP)--the total value of all the goods and services produced in the United States--increased at an annual rate of 2.8 percent in the fourth quarter of 2010.…

Climatic regions as an indicator of forest coarse and fine woody debris carbon stocks in the United States

Treesearch

Christopher W. Woodall; Greg C. Liknes

2008-01-01

Coarse and fine woody debris are substantial forest ecosystem carbon stocks; however, there is a lack of understanding how these detrital carbon stocks vary across forested landscapes. Because forest woody detritus production and decay rates may partially depend on climatic conditions, the accumulation of coarse and fine woody debris carbon stocks in forests may be...

An assessment of training needs for the lumber manufacturing industry in the eastern United States

Treesearch

Joseph Denig; Scott Page; Yuhua Su; Karen Martinson

2008-01-01

A training needs assessment of the primary forest products industry was conducted for 33 eastern states. his publication presents in detail the statistical analysis of the study. Of the 2,570 lumber manufacturing companies, consisting of firms with more than six employees for the U.S. Department of Labor Standard Industrial Classification Code 2421, the response rate...

Environmental and economic impacts of livestock productivity increase in sub-Saharan Africa.

PubMed

Cardoso, Luis Alfaro

2012-12-01

Livestock production in sub-Saharan Africa (SSA) is not matching the annual 2.5 % growth of its population. Regional per capita meat and milk production corresponds, respectively, to about 13 and 8 % of developed countries indicators. Livestock performances in this region have decreased within the last 30 years. In fact, SSA, with a 12 % bovine extraction rate against a world average of 21 %, includes about 16 % of world cattle, only producing 6 and 2.6 % of global meat and milk, respectively. These low performances have economic and environmental consequences reflecting the necessity for upgrading livestock managing skills in the region. This effort includes various components such as sanitary prophylaxis, reproduction, nutrition, and in particular, substantial increase in livestock yield for human consumption. This will allow for an improved animal and pasture management and soil preservation, enhancing meat production and decreasing methane and nitrogen emissions from enteric fermentation and manure processing. These environmental gains due to increased livestock off-take rates can represent relevant credits in the global Environmental Carbon Market under the United Nations Framework Convention on Climate Change Kyoto protocol. These credits can be used for investments in livestock essential services and marketing facilities leading to improved productivity.

The effects of tenure and promotion on surgeon productivity.

PubMed

Lam, Adam; Heslin, Martin J; Tzeng, Ching-Wei D; Chen, Herbert

2018-07-01

Studies investigating the impact of promotion and tenure on surgeon productivity are lacking. The aim of this study is to elucidate the relationship of promotion and tenure to surgeon productivity. We reviewed data for the Department of Surgery at our institution. Relative value units (RVUs) billed per year, publications per year, and grant funding per year were used to assess productivity from 2010 to 2016. We analyzed tenure-track (TT) and non-tenure-track (NT) surgeons and compared the productivity within these groups by rank: assistant professor (ASST), associate professor (ASSOC), and full professor (FULL). Kruskal-Wallis and Mann-Whitney U tests were used to assess significance and relationships between the groups. A TT faculty was promoted if they produced more research, with the highest publication rates in TT FULL. TT faculty publishing rates increased from ASST to ASSOC (1 versus 2, P = 0.006) and from ASSOC to FULL (2 versus 4, P < 0.001). There were no differences in the low publication rates among NT ranks. Grant funding was also highest at the TT FULL level. The clinical production (RVUs) was highest between TT ASSOC and NT FULL. TT faculty increased productivity between ASST and ASSOC (7023 versus 8384, P = 0.001) and decreased between ASSOC and FULL (8384 versus 6877, P < 0.001). Among NT faculty, RVUs were stagnant between ASST and ASSOC levels (4877 versus 6313, P = 0.312) and increased between ASSOC and FULL levels (6313 versus 8975, P < 0.001). Tenure and nontenure pathways appear to appropriately incentivize surgical faculty over the course of their advancement. TT FULL has the highest research production and grant funding, whereas NT FULL has the highest clinical production. Copyright © 2018 Elsevier Inc. All rights reserved.

Production of acids and alcohols from syngas in a two-stage continuous fermentation process.

PubMed

Abubackar, Haris Nalakath; Veiga, María C; Kennes, Christian

2018-04-01

A two-stage continuous system with two stirred tank reactors in series was utilized to perform syngas fermentation using Clostridium carboxidivorans. The first bioreactor (bioreactor 1) was maintained at pH 6 to promote acidogenesis and the second one (bioreactor 2) at pH 5 to stimulate solventogenesis. Both reactors were operated in continuous mode by feeding syngas (CO:CO 2 :H 2 :N 2 ; 30:10:20:40; vol%) at a constant flow rate while supplying a nutrient medium at different flow rates of 8.1, 15, 22 and 30 ml/h. A cell recycling unit was added to bioreactor 2 in order to recycle the cells back to the reactor, maintaining the OD 600 around 1 in bioreactor 2 throughout the experimental run. When comparing the flow rates, the best results in terms of solvent production were obtained with a flow rate of 22 ml/h, reaching the highest average outlet concentration for alcohols (1.51 g/L) and the most favorable alcohol/acid ratio of 0.32. Copyright © 2018 Elsevier Ltd. All rights reserved.

Contractual Duration and Investment Incentives: Evidence from Large Scale Production Units in China

NASA Astrophysics Data System (ADS)

Li, Fang; Feng, Shuyi; D'Haese, Marijke; Lu, Hualiang; Qu, Futian

2017-04-01

Large Scale Production Units have become important forces in the supply of agricultural commodities and agricultural modernization in China. Contractual duration in farmland transfer to Large Scale Production Units can be considered to reflect land tenure security. Theoretically, long-term tenancy contracts can encourage Large Scale Production Units to increase long-term investments by ensuring land rights stability or favoring access to credit. Using a unique Large Scale Production Units- and plot-level field survey dataset from Jiangsu and Jiangxi Province, this study aims to examine the effect of contractual duration on Large Scale Production Units' soil conservation behaviours. IV method is applied to take into account the endogeneity of contractual duration and unobserved household heterogeneity. Results indicate that farmland transfer contract duration significantly and positively affects land-improving investments. Policies aimed at improving transaction platforms and intermediary organizations in farmland transfer to facilitate Large Scale Production Units to access farmland with long-term tenancy contracts may therefore play an important role in improving soil quality and land productivity.

Development and field deployment of an instrument to measure ozone production rates in the troposphere

NASA Astrophysics Data System (ADS)

Sklaveniti, S.; Locoge, N.; Dusanter, S.; Leonardis, T.; Lew, M.; Bottorff, B.; Sigler, P. S. R.; Stevens, P. S.; Wood, E. C. D.; Kundu, S.; Gentner, D. R.

2015-12-01

Ozone is a greenhouse gas and a primary constituent of urban smog, irritating the respiratory system and damaging the vegetation. The current understanding of ozone chemistry in the troposphere indicates that net ozone production P(O3) occurs when peroxy radicals (HO2+RO2) react with NO producing NO2, whose photolysis leads to O3 formation. P(O3) values can be calculated from peroxy radical concentrations, either from ambient measurements or box model outputs. These two estimation methods often disagree for NOx mixing ratios higher than a few ppb, questioning our ability to measure peroxy radicals under high NOx conditions or indicating that there are still unknowns in our understanding of the radical and ozone production chemistry. Direct measurements of ozone production rates will help to address this issue and improve air quality regulations. We will present the development of an instrument for direct measurements of ozone production rates (OPR). The OPR instrument consists of three parts: (i) two quartz flow tubes sampling ambient air ("Ambient" and "Reference" flow tube), (ii) an O3-to-NO2 conversion unit, and (iii) a Cavity Attenuated Phase Shift (CAPS) monitor to measure NO2. The air in the Ambient flow tube undergoes the same photochemistry as in ambient air, while the Reference flow tube is covered by a UV filter limiting the formation of ozone. Exiting the flow tubes, ozone is converted into NO2 and the sum O3+NO2 (Ox) is measured by the CAPS monitor. The difference in Ox between the two flow tubes divided by the residence time yields the Ox production rate, P(Ox). P(O3) is assumed to be equal to P(Ox) when NO2 is efficiently photolyzed during daytime. We will present preliminary results from the Indiana Radical, Reactivity and Ozone Production Intercomparison (IRRONIC) campaign in Bloomington, Indiana, during July 2015, where ozone production rates were measured by introducing various amounts of NO inside the flow tubes to investigate the ozone production sensitivity.

A PHGDH inhibitor reveals coordination of serine synthesis and 1-carbon unit fate

PubMed Central

Pacold, Michael E.; Brimacombe, Kyle R.; Chan, Sze Ham; Rohde, Jason M.; Lewis, Caroline A.; Swier, Lotteke J.Y.M.; Possemato, Richard; Chen, Walter W.; Sullivan, Lucas B.; Fiske, Brian P.; Cho, Sung Won; Freinkman, Elizaveta; Birsoy, Kıvanç; Abu-Remaileh, Monther; Shaul, Yoav D.; Liu, Chieh Min; Zhou, Minerva; Koh, Min Jung; Chung, Haeyoon; Davidson, Shawn M.; Luengo, Alba; Wang, Amy Q.; Xu, Xin; Yasgar, Adam; Liu, Li; Rai, Ganesha; Westover, Kenneth D.; Vander Heiden, Matthew G.; Shen, Min; Gray, Nathanael S.; Boxer, Matthew B.; Sabatini, David M.

2016-01-01

Serine is a both a proteinogenic amino acid and the source of one-carbon units essential for de novo purine and deoxythymidine synthesis. In the canonical glucose-derived serine synthesis pathway, Homo sapiens phosphoglycerate dehydrogenase (PHGDH) catalyzes the first, rate-limiting step. Genetic loss of PHGDH is toxic towards PHGDH-overexpressing breast cancer cell lines even in the presence of exogenous serine. Here, we use a quantitative high-throughput screen to identify small molecule PHGDH inhibitors. These compounds reduce the production of glucose-derived serine in cells and suppress the growth of PHGDH-dependent cancer cells in culture and in orthotopic xenograft tumors. Surprisingly, PHGDH inhibition reduced the incorporation into nucleotides of one-carbon units from glucose-derived and exogenous serine. We conclude that glycolytic serine synthesis coordinates the use of one-carbon units from endogenous and exogenous serine in nucleotide synthesis, and suggest that one-carbon unit wasting may contribute to the efficacy of PHGDH inhibitors in vitro and in vivo. PMID:27110680

"Stillbirth rates in 20 countries of Latin America: an ecological study".

PubMed

Pingray, Veronica; Althabe, Fernando; Vazquez, Paula; Correa, Malena; Pajuelo, Mónica; Belizán, José M

2018-05-23

To describe country-level stillbirth rates and their change over time in Latin America, and to measure the association of stillbirth rates with socioeconomic and health coverage indicators in the region. Ecological study. 20 countries of Latin America. Aggregated data from pregnant women with countries as units of analysis. We used stillbirth estimates, and socioeconomic and health care coverage indicators reported from 2006 to 2016 from UNICEF, United Nations Development Programme and World Bank datasets. We calculated Spearman's correlation coefficients between stillbirths rates and socioeconomic and health coverage indicators. National estimates of stillbirth rates in each country. The estimated stillbirth rate for Latin America for 2015 was 8.1 per 1000 births (range 3.1-24.9). Seven Latin America countries had rates higher than 10 stillbirths per 1000 births. The average annual reduction rate for the region was 2% (range 0.1-3.8%), with the majority of Latin America countries ranging between 1.5 and 2.5%. National stillbirth rates were correlated to: women's schooling (rS=-0.7910), gross domestic product per capita (rS=-0.8226), fertility rate (rS=0.6055), urban population (rS=-0.6316) and deliveries at health facilities (rS=-0.6454). Country-level estimated stillbirth rates in Latin America varied widely in 2015. The trend and magnitude of reduction in stillbirth rates between 2000 and 2015 was similar to the world average. Socioeconomic and health coverage indicators were correlated to stillbirth rates in Latin America. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Pancreatic Cancer Chemoprevention by Phytochemicals

PubMed Central

Boreddy, Srinivas Reddy; Srivastava, Sanjay K.

2012-01-01

Pancreatic cancer is fourth leading cause of cancer-related deaths in the United States of America. In spite of recent advances in the current therapeutic modalities such as surgery, radiation and chemotherapy patients, the average five year survival rate remains still less than 5%. Recently, compounds from natural sources receive ample of attention as anti-cancer agents. Many epidemiological studies published over the past few decades provide a strong correlation between consumption of vegetables, fruits or plant derived products and reduced incidence of cancer. The present review focuses on the potential antitumor effects of various natural products. PMID:23111102

Nitrogen

USGS Publications Warehouse

Apodaca, L.E.

2012-01-01

Ammonia was produced by 12 companies at 27 plants in 15 states in the United States during 2011. Sixty-one percent of total U.S. ammonia production capacity was centered in Louisiana, Oklahoma and Texas because of those states' large reserves of natural gas, the dominant domestic feedstock. In 2011, U.S. producers operated at about 84 percent of their rated capacity (excluding plants that were idle for the entire year). Four companies — CF Industries Holdings Inc.; Koch Nitrogen Co.; PCS Nitrogen Inc. and Agrium Inc., in descending order — accounted for 77 percent of the total U.S. ammonia production capacity.

Exercise: the data on its role in health, mental health, disease prevention, and productivity.

PubMed

Diehl, Jason J; Choi, Haemi

2008-12-01

How would you define exercise? If you look up exercise in the dictionary, it is defined as physical activity used for the purpose of conditioning any part of the body. Exercise is an important topic because in the United States less than 50% of the total population exercises on a regular basis. The lack of regular physical activity is linked to an increased rate of obesity, development of chronic diseases, and an overall decline in health. This article uses an evidence-based approach to demonstrate how exercise affects health, mental health, disease prevention, and productivity.

Performance prediction of optical image stabilizer using SVM for shaker-free production line

NASA Astrophysics Data System (ADS)

Kim, HyungKwan; Lee, JungHyun; Hyun, JinWook; Lim, Haekeun; Kim, GyuYeol; Moon, HyukSoo

2016-04-01

Recent smartphones adapt the camera module with optical image stabilizer(OIS) to enhance imaging quality in handshaking conditions. However, compared to the non-OIS camera module, the cost for implementing the OIS module is still high. One reason is that the production line for the OIS camera module requires a highly precise shaker table in final test process, which increases the unit cost of the production. In this paper, we propose a framework for the OIS quality prediction that is trained with the support vector machine and following module characterizing features : noise spectral density of gyroscope, optically measured linearity and cross-axis movement of hall and actuator. The classifier was tested on an actual production line and resulted in 88% accuracy of recall rate.

Performance and accuracy of criticality calculations performed using WARP – A framework for continuous energy Monte Carlo neutron transport in general 3D geometries on GPUs

DOE PAGES

Bergmann, Ryan M.; Rowland, Kelly L.; Radnović, Nikola; ...

2017-05-01

In this companion paper to "Algorithmic Choices in WARP - A Framework for Continuous Energy Monte Carlo Neutron Transport in General 3D Geometries on GPUs" (doi:10.1016/j.anucene.2014.10.039), the WARP Monte Carlo neutron transport framework for graphics processing units (GPUs) is benchmarked against production-level central processing unit (CPU) Monte Carlo neutron transport codes for both performance and accuracy. We compare neutron flux spectra, multiplication factors, runtimes, speedup factors, and costs of various GPU and CPU platforms running either WARP, Serpent 2.1.24, or MCNP 6.1. WARP compares well with the results of the production-level codes, and it is shown that on the newestmore » hardware considered, GPU platforms running WARP are between 0.8 to 7.6 times as fast as CPU platforms running production codes. Also, the GPU platforms running WARP were between 15% and 50% as expensive to purchase and between 80% to 90% as expensive to operate as equivalent CPU platforms performing at an equal simulation rate.« less

Performance and accuracy of criticality calculations performed using WARP – A framework for continuous energy Monte Carlo neutron transport in general 3D geometries on GPUs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bergmann, Ryan M.; Rowland, Kelly L.; Radnović, Nikola

In this companion paper to "Algorithmic Choices in WARP - A Framework for Continuous Energy Monte Carlo Neutron Transport in General 3D Geometries on GPUs" (doi:10.1016/j.anucene.2014.10.039), the WARP Monte Carlo neutron transport framework for graphics processing units (GPUs) is benchmarked against production-level central processing unit (CPU) Monte Carlo neutron transport codes for both performance and accuracy. We compare neutron flux spectra, multiplication factors, runtimes, speedup factors, and costs of various GPU and CPU platforms running either WARP, Serpent 2.1.24, or MCNP 6.1. WARP compares well with the results of the production-level codes, and it is shown that on the newestmore » hardware considered, GPU platforms running WARP are between 0.8 to 7.6 times as fast as CPU platforms running production codes. Also, the GPU platforms running WARP were between 15% and 50% as expensive to purchase and between 80% to 90% as expensive to operate as equivalent CPU platforms performing at an equal simulation rate.« less

Denitrifying sulfide removal process on high-tetracycline wastewater.

PubMed

Liu, Chunshuang; Xu, Jian; Lee, Duu-Jong; Yu, Daoyong; Liu, Lihong

2016-04-01

Antibiotics wastewater from tetracycline (TC) production unit can have high levels of chemical oxygen demand, ammonium and sulfate and up to a few hundreds of milligrams per liter of TC. Denitrifying sulfide removal (DSR) process is set up for simultaneously removal of sulfur, carbon and nitrogen from waters. The DSR process was for the first time studied for treating TC wastewaters. The TC stress has no adverse effects on removal rates of nitrate and acetate; however, it moderately deteriorated sulfide removal rates and S(0) accumulation rates when the concentration is higher than 100mgL(-1) TC. The Thauera sp., and Pseudomonas sp. present the heterotrophs and Sulfurovum sp. presented the autotroph for the present DSR reactions. The high tolerance of TC stress by the tested consortium was explained by the excess production of extracellular polymeric substances at high TC concentration, which can bind with TC for minimizing its inhibition effects. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dynamic optimization of CELSS crop photosynthetic rate by computer-assisted feedback control

NASA Astrophysics Data System (ADS)

Chun, C.; Mitchell, C. A.

1997-01-01

A procedure for dynamic optimization of net photosynthetic rate (Pn) for crop production in Controlled Ecological Life-Support Systems (CELSS) was developed using leaf lettuce as a model crop. Canopy Pn was measured in real time and fed back for environmental control. Setpoints of photosynthetic photon flux (PPF) and CO_2 concentration for each hour of the crop-growth cycle were decided by computer to reach a targeted Pn each day. Decision making was based on empirical mathematical models combined with rule sets developed from recent experimental data. Comparisons showed that dynamic control resulted in better yield per unit energy input to the growth system than did static control. With comparable productivity parameters and potential for significant energy savings, dynamic control strategies will contribute greatly to the sustainability of space-deployed CELSS.

Global demand for rare earth resources and strategies for green mining

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dutta, Tanushree

Rare earth elements (REEs) are essential raw materials for emerging renewable energy resources and ‘smart’ electronic devices. Global REE demand is slated to grow at an annual rate of 5% by 2020. This high growth rate will require a steady supply base of REEs in the long run. At present, China is responsible for 85% of global rare earth oxide (REO) production. To overcome this monopolistic supply situation, new strategies and investments are necessary to satisfy domestic supply demands. Concurrently, environmental, economic, and social problems arising from REE mining must be addressed. There is an urgent need to develop efficientmore » REE recycling techniques from end-of-life products, technologies to minimize the amount of REEs required per unit device, and methods to recover them from fly ash or fossil fuel-burning wastes.« less

Global demand for rare earth resources and strategies for green mining.

PubMed

Dutta, Tanushree; Kim, Ki-Hyun; Uchimiya, Minori; Kwon, Eilhann E; Jeon, Byong-Hun; Deep, Akash; Yun, Seong-Taek

2016-10-01

Rare earth elements (REEs) are essential raw materials for emerging renewable energy resources and 'smart' electronic devices. Global REE demand is slated to grow at an annual rate of 5% by 2020. This high growth rate will require a steady supply base of REEs in the long run. At present, China is responsible for 85% of global rare earth oxide (REO) production. To overcome this monopolistic supply situation, new strategies and investments are necessary to satisfy domestic supply demands. Concurrently, environmental, economic, and social problems arising from REE mining must be addressed. There is an urgent need to develop efficient REE recycling techniques from end-of-life products, technologies to minimize the amount of REEs required per unit device, and methods to recover them from fly ash or fossil fuel-burning wastes. Copyright © 2016 Elsevier Inc. All rights reserved.

Does the ocean-atmosphere system have more than one stable mode of operation?

NASA Technical Reports Server (NTRS)

Broecker, W. S.; Peteet, D. M.; Rind, D.

1985-01-01

The climate record obtained from two long Greenland ice cores reveals several brief climate oscillations during glacial time. The most recent of these oscillations, also found in continental pollen records, has greatest impact in the area under the meteorological influence of the northern Atlantic, but none in the United States. This suggests that these oscillations are caused by fluctuations in the formation rate of deep water in the northern Atlantic. As the present production of deep water in this area is driven by an excess of evaporation over precipitation and continental runoff, atmospheric water transport may be an important element in climate change. Changes in the production rate of deep water in this sector of the ocean may push the climate system from one quasi-stable mode of operation to another.

Bacteriological survey of frozen meat and gravy produced at establishments under federal inspection.

PubMed

Surkiewicz, B F; Harris, M E; Johnston, R W

1973-10-01

During visits to 34 federally inspected establishments producing frozen meat and gravy, 541 production line samples and 535 finished product units were collected for bacteriological analyses. It was found that more than 70% of the sets of finished product (10 units/set) produced under good manufacturing practices had: (i) four or fewer coliform-positive units, (ii) two or fewer Escherichia coli-positive units, (iii) three or fewer Staphylococcus aureus-positive units, and (iv) an aerobic plate count of fewer than 50,000/g (geometric mean of 10 units). All finished product units were negative for salmonellae.

Bacteriological Survey of Frozen Meat and Gravy Produced at Establishments Under Federal Inspection

PubMed Central

Surkiewicz, Bernard F.; Harris, Marshall E.; Johnston, Ralph W.

1973-01-01

During visits to 34 federally inspected establishments producing frozen meat and gravy, 541 production line samples and 535 finished product units were collected for bacteriological analyses. It was found that more than 70% of the sets of finished product (10 units/set) produced under good manufacturing practices had: (i) four or fewer coliform-positive units, (ii) two or fewer Escherichia coli-positive units, (iii) three or fewer Staphylococcus aureus-positive units, and (iv) an aerobic plate count of fewer than 50,000/g (geometric mean of 10 units). All finished product units were negative for salmonellae. PMID:4584595

Characteristics of on-demand biogas production by using sugar beet silage.

PubMed

Ahmed, Sharif; Kazda, Marian

2017-08-01

On-demand electricity generation can be achieved by just-in-time biogas production instantly utilized in co-generation units. For this goal, easily degradable substrates like sugar beet silage have a high potential. Potential for on-demand biogas production from co-digestion of sugar beet silage (SS) with grass silage (GS) was evaluated in two experiments at organic loading rates (OLRs) of 1.5 kgVS m -3 day -1 and 2.5 kgVS m -3 day -1 , respectively. Each experiment was fed with intermittent feeding system at 8 hrs interval at the same feedstock ratios (volatile solids based) of GS:SS-1:0, 3:1 and 1:3, respectively. Modelling by Gaussian equation was performed in order to understand the effects of SS on biogas production. Addition of sugar beet silage led to maximum biogas production within a short time, but it differed significantly depending on feedstock ratios and OLRs, respectively. At OLR 1.5 kgVS m -3 day -1 , during mono fermentation of grass silage maximum biogas production rate of 0.27 l N hr -1 was reached at 2.74 hrs. Production rate did not change at feedstock ratio of GS:SS-3:1 but increased to 0.64 l N hr -1 at GS:SS-1:3 within a shorter time span (1.58 hrs). On the contrary, at OLR of 2.5 kgVS m -3 day -1 time span between feedstock input and maximum biogas production did not differ significantly (p > 0.05) among the reactors. Biogas production rates were 0.60 l N hr -1 within 2.27 hrs and 0.82 l N hr -1 within 2.30 hrs at GS:SS-3:1 and GS:SS-1:3, respectively. Surprisingly, there was no time lag between maximum biogas and methane production rates, irrespectively of OLR. This implies that once the whole microbial community is adapted to intermittent substrate input, the metabolic products are instantly utilized through the all steps of anaerobic substrate degradation. Applying this finding opens new perspectives for on-demand biogas energy production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of an advanced, continuous mild gasification process for the production of co-products. Quarterly report, October 30, 1991--January 2, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Neal, G.W.

1991-12-31

During this quarter the work on Task 3, char upgrading, was in two areas; upgrading Penelec char made from Penelec filter cake to blast furnace formed coke, and evaluating various bituminous pitch binders. The formed coke from Penelec filter cake was of good quality with a high crush strength of 3000 pounds. The reactivity was not equal to that of conventional coke but it is felt that it could be made to equal conventional coke with further study, specifically by adding binder coal to the raw material recipe. The work evaluating bituminous pitch binders confirmed earlier thinking that will bemore » valuable to a commercial scale-up. Asphalt binders are compatible with coal tar binders and produce a coke of equal quality. Hence asphalt binders can be used to supply deficiencies of tar production in units employing coals with insufficient volatile matter to supply enough tar for the coking process. Asphalt binders have about a 50% savings from coal tar pitch. During the 4th Quarter of 1991, a total of 15 Continuous Mild Gasification Unit (CMGU) test runs were made. Efforts continued to determine the optimum forward/reverse ratio to maximize coal feed rate. The success of these efforts has been limited with a maximum coal feed rate of 400 lbs/hr obtainable with a caking coal. The handicap of not having screw shaft heaters cannot be overcome by adjustment of the forward/reverse ratio.« less

Development of an advanced, continuous mild gasification process for the production of co-products

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Neal, G.W.

1991-01-01

During this quarter the work on Task 3, char upgrading, was in two areas; upgrading Penelec char made from Penelec filter cake to blast furnace formed coke, and evaluating various bituminous pitch binders. The formed coke from Penelec filter cake was of good quality with a high crush strength of 3000 pounds. The reactivity was not equal to that of conventional coke but it is felt that it could be made to equal conventional coke with further study, specifically by adding binder coal to the raw material recipe. The work evaluating bituminous pitch binders confirmed earlier thinking that will bemore » valuable to a commercial scale-up. Asphalt binders are compatible with coal tar binders and produce a coke of equal quality. Hence asphalt binders can be used to supply deficiencies of tar production in units employing coals with insufficient volatile matter to supply enough tar for the coking process. Asphalt binders have about a 50% savings from coal tar pitch. During the 4th Quarter of 1991, a total of 15 Continuous Mild Gasification Unit (CMGU) test runs were made. Efforts continued to determine the optimum forward/reverse ratio to maximize coal feed rate. The success of these efforts has been limited with a maximum coal feed rate of 400 lbs/hr obtainable with a caking coal. The handicap of not having screw shaft heaters cannot be overcome by adjustment of the forward/reverse ratio.« less

In-home drug storage and utilization habits: a Sudanese study.

PubMed

Yousif, M A

2002-01-01

Community drug-use habits were studied in 469 household units in different areas of Sudan. About 97.7% of the investigated families had at least one drug product stored at home. The study revealed a high rate of self-medication (46.9%), repeated use of unfinished stored drugs (55.0%), a high rate of drug exchange among families (59.3%) and poor compliance (71.2%). In Sudan there is still a great need to educate and to motivate the general public regarding the principles of rational drug use in order to safeguard health and avoid economic losses.

High Rates of Nonsusceptibility to Ceftazidime-avibactam and Identification of New Delhi Metallo-β-lactamase Production in Enterobacteriaceae Bloodstream Infections at a Major Cancer Center.

PubMed

Aitken, Samuel L; Tarrand, Jeffrey J; Deshpande, Lalitagauri M; Tverdek, Frank P; Jones, Anne L; Shelburne, Samuel A; Prince, Randall A; Bhatti, Micah M; Rolston, Kenneth V I; Jones, Ronald N; Castanheira, Mariana; Chemaly, Roy F

2016-10-01

Resistance to the novel β-lactam/β-lactamase inhibitor combination ceftazidime-avibactam (CAZ-AVI) among carbapenem-resistant Enterobacteriaceae (CRE) has infrequently been reported in the United States. We report unexpectedly high rates of resistance to CAZ-AVI in CRE bloodstream isolates at our institution associated with the nonoutbreak spread of New Delhi metallo-β-lactamase in diverse Enterobacteriaceae species. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

Severe accident skyshine radiation analysis by MCNP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eurajoki, T.

1994-12-31

If a severe accident with a considerable core damage occurs at a nuclear power plant whose containment top is remarkably thin compared with the walls, the radiation transported through the top and scattered in air may cause high dose rates at the power plant area. Noble gases and other fission products released to the containment act as sources. The dose rates caused by skyshine have been calculated by MCNP3A for the Loviisa nuclear power plant (two-unit, 445-MW VVER) for the outside area and inside some buildings, taking the attenuation in the roofs of the buildings into account.

Productive engagement among older Americans: prevalence, patterns, and implications for public policy.

PubMed

Hinterlong, James E

2008-01-01

This study estimates the prevalence of productive engagement among adults aged 60 and over residing in the United States over a nine-year period. We analyze three waves of data from the Americans' Changing Lives Study, which allows the findings to describe the non-institutionalized older American population. Focusing upon five activities--formal paid employment, irregular paid work, unpaid volunteerism, caregiving, and informal assistance to others--we identify changes in the engagement rates, examine the extent to which engagement occurs through single or multiple concurrent activities, and document intra-individual patterns of engagement within and across forms of productive activity, including the continuity, initiation, and cessation of involvement. The findings reveal that late-life productive engagement is widespread, with the majority of older individuals involved in multiple forms of activity concurrently. Non-market-based activities such as caregiving, informal assistance, and volunteering are most prevalent. Initiation and cessation of activities are common and yield more complex patterns and lower rates of non-participation than are revealed in cross-sectional analyses. Time spent in productive engagement is highly variable and exhibits an overall decline across time. We conclude by highlighting policy strategies to increase the availability and quality of opportunities for productive engagement and promote planning for engagement in late life.

Classical Notions of Coagulation Revisited in Relation with Blood Losses, Transfusion Rate for 700 Consecutive Liver Transplantations.

PubMed

Massicotte, Luc; Thibeault, Lynda; Roy, André

2015-07-01

During the last decade, improved surgical and anesthetic management, such as better understanding of coagulation defects and the use of the phlebotomy, has reduced intraoperative blood product transfusions during orthotopic liver transplantation (OLT). The goal of this study was to look at the impact of initial conventional coagulation tests on blood loss and blood product requirement and to evaluate the role of the phlebotomy during liver transplantations. A total of 700 consecutive OLTs were studied. The group of patients was split into two according to the median of starting international normalized ratio to study blood losses and transfusion rate. Logistic regression was used to determine the main predictors of blood loss, intraoperative blood transfusion, and survival. There was no intergroup difference for demographic characteristics. The mean blood loss was 1,184 mL with a median of 920 mL. Overall, 77.4% of the patients did not receive any blood product and the mean transfusion rate of red blood cells (RBCs) was 0.5 ± 1.4 units per patient. Severity of recipients' disease did not correlate with blood loss or transfusion rate. Starting hemoglobin value was the only biochemical variable linked to RBC transfusions. Phlebotomy was linked to decrease in blood loss, RBC transfusions, and increased survival rate. It is concluded that bleeding did not correlate with traditional coagulation defects or the severity of recipient's disease. Preemptive phlebotomy was linked to a decreased blood loss, a decreased transfusion rate, and an increased 1-year survival rate. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Critical care medicine in the United States 2000-2005: an analysis of bed numbers, occupancy rates, payer mix, and costs.

PubMed

Halpern, Neil A; Pastores, Stephen M

2010-01-01

To analyze the evolving role, patterns of use, and costs of critical care medicine in the United States from 2000 to 2005. Retrospective study of data from the Hospital Cost Report Information System (Centers for Medicare and Medicaid Services, Baltimore, Maryland). Nonfederal, acute care hospitals with critical care medicine beds in the United States. None. None. We analyzed hospital and critical care medicine beds, bed types, days, occupancy rates, payer mix (Medicare and Medicaid), and costs. Critical care medicine costs were compared with national cost indexes. Between 2000 and 2005, the total number of U.S. hospitals with critical care medicine beds decreased by 12.2% (from 3,586 to 3,150). Although the number of hospital beds decreased by 4.2% (from 655,785 to 628,409), both hospital days and occupancy rates increased by 5.1% (from 145.1 to 152.5 million) and 13.7% (from 59% to 67%), respectively. Critical care medicine beds increased by 6.5% (from 88,252 to 93,955), days by 10.6% (from 21.0 to 23.2 million), and occupancy rates by 4.5% (from 65% to 68%). The majority (90%) of critical care medicine beds were classified as intensive care, premature/neonatal, and coronary care unit beds. The percentage of critical care medicine days used by Medicare decreased by 3.8% (from 37.9% to 36.5%) compared with an increase of 15.5% (from 14.5% to 16.8%) by Medicaid. From 2000 to 2005, critical care medicine costs per day increased by 30.4% (from $2698 to $3518). Although annual critical care medicine costs increased by 44.2% (from $56.6 to $81.7 billion), the proportion of hospital costs and national health expenditures allocated to critical care medicine decreased by 1.6% and 1.8%, respectively. However, the proportion of the gross domestic product used by critical care medicine increased by 13.7%. In 2005, critical care medicine costs represented 13.4% of hospital costs, 4.1% of national health expenditures, and 0.66% of the gross domestic product. Critical care medicine continues to grow in a shrinking U.S. hospital system. The critical care medicine payer mix is evolving, with Medicaid increasing in its percentage of critical care medicine use. Critical care medicine is more cost controlled than other healthcare indexes, but is still using an increasing percentage of the gross domestic product. Our updated and comprehensive critical care medicine use and cost analysis provides a contemporary benchmark for the strategic planning of critical care medicine services within the U.S. healthcare system.

Estimated ground-water discharge by evapotranspiration from Death Valley, California, 1997-2001

USGS Publications Warehouse

DeMeo, Guy A.; Laczniak, Randell J.; Boyd, Robert A.; Smith, J. LaRue; Nylund, Walter E.

2003-01-01

The U.S. Geological Survey, in cooperation with the National Park Service and Inyo County, Calif., collected field data from 1997 through 2001 to accurately estimate the amount of annual ground-water discharge by evapotranspiration (ET) from the floor of Death Valley, California. Multispectral satellite-imagery and National Wetlands Inventory data are used to delineate evaporative ground-water discharge areas on the Death Valley floor. These areas are divided into five general units where ground-water discharge from ET is considered to be significant. Based upon similarities in soil type, soil moisture, vegetation type, and vegetation density; the ET units are salt-encrusted playa (21,287 acres), bare-soil playa (75,922 acres), low-density vegetation (6,625 acres), moderate-density vegetation (5,019 acres), and high-density vegetation (1,522 acres). Annual ET was computed for ET units with micrometeorological data which were continuously measured at six instrumented sites. Total ET was determined at sites that were chosen for their soil- and vegetated-surface conditions, which include salt-encrusted playa (extensive salt encrustation) 0.17 feet per year, bare-soil playa (silt and salt encrustation) 0.21 feet per year, pickleweed (pickleweed plants, low-density vegetation) 0.60 feet per year, Eagle Borax (arrowweed plants and salt grass, moderate-density vegetation) 1.99 feet per year, Mesquite Flat (mesquite trees, high-density vegetation) 2.86 feet per year, and Mesquite Flat mixed grasses (mixed meadow grasses, high-density vegetation) 3.90 feet per year. Precipitation, flooding, and ground-water discharge satisfy ET demand in Death Valley. Ground-water discharge is estimated by deducting local precipitation and flooding from cumulative ET estimates. Discharge rates from ET units were not estimated directly because the range of vegetation units far exceeded the five specific vegetation units that were measured. The rate of annual ground-water discharge by ET for each ET unit was determined by fitting the annual ground-water ET for each site with the variability in vegetation density in each ET unit. The ET rate representing the midpoint of each ET unit was used as the representative value. The rate of annual ground-water ET for the playa sites did not require scaling in this manner. Annual ground-water discharge by ET was determined for all five ET units: salt-encrusted playa (0.13 foot), bare-soil playa (0.15 foot), low-density vegetation (1.0 foot), moderate-density vegetation (2.0 feet), and high-density vegetation (3.0 feet), and an area of vegetation or bare soil not contributing to ground-water discharge unclassified (0.0 foot). The total ground-water discharge from ET for the Death Valley floor is about 35,000 acre-feet and was computed by summing the products of the area of each ET unit multiplied by a corresponding ET rate for each unit.

A stories-based interactive DVD intended to help people with hypertension achieve blood pressure control through improved communication with their doctors.

PubMed

Ashton, Carol M; Houston, Thomas K; Williams, Jessica Hillman; Larkin, Damien; Trobaugh, John; Crenshaw, Katie; Wray, Nelda P

2010-05-01

Our goal was to develop an interactive DVD to help African American and Caucasian American adults with hypertension learn how to become better communicators during medical interactions. Material was to be presented in several formats, including patients' narratives (stories). To develop the narratives we recruited members of the target audience and elicited stories and story units in focus groups, interviews, and seminars. Story units were ranked-ordered based on conformance with the theory of planned behavior and narrative qualities and then melded into cohesive stories. The stories were recounted by actors on the DVD. 55 adults (84% women; 93% African American) participated in a focus group, interview, or seminar; transcripts yielded 120 story units. The most highly rated units were woven into 11 stories. The six highest rated stories/actor-storytellers were selected for presentation on the DVD. We achieved our goal of developing an easy-to-use, story-driven product that may teach adults how to talk effectively with their doctors about hypertension. The DVD's effectiveness should be tested in a randomized trial. Behavioral interventions aimed at improving patients' ability to communicate during doctor visits may be useful adjuncts in the achievement of BP goals. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.

Contributions to muscle force and EMG by combined neural excitation and electrical stimulation

NASA Astrophysics Data System (ADS)

Crago, Patrick E.; Makowski, Nathaniel S.; Cole, Natalie M.

2014-10-01

Objective. Stimulation of muscle for research or clinical interventions is often superimposed on ongoing physiological activity without a quantitative understanding of the impact of the stimulation on the net muscle activity and the physiological response. Experimental studies show that total force during stimulation is less than the sum of the isolated voluntary and stimulated forces, but the occlusion mechanism is not understood. Approach. We develop a model of efferent motor activity elicited by superimposing stimulation during a physiologically activated contraction. The model combines action potential interactions due to collision block, source resetting, and refractory periods with previously published models of physiological motor unit recruitment, rate modulation, force production, and EMG generation in human first dorsal interosseous muscle to investigate the mechanisms and effectiveness of stimulation on the net muscle force and EMG. Main results. Stimulation during a physiological contraction demonstrates partial occlusion of force and the neural component of the EMG, due to action potential interactions in motor units activated by both sources. Depending on neural and stimulation firing rates as well as on force-frequency properties, individual motor unit forces can be greater, smaller, or unchanged by the stimulation. In contrast, voluntary motor unit EMG potentials in simultaneously stimulated motor units show progressive occlusion with increasing stimulus rate. The simulations predict that occlusion would be decreased by a reverse stimulation recruitment order. Significance. The results are consistent with and provide a mechanistic interpretation of previously published experimental evidence of force occlusion. The models also predict two effects that have not been reported previously—voluntary EMG occlusion and the advantages of a proximal stimulation site. This study provides a basis for the rational design of both future experiments and clinical neuroprosthetic interventions involving either motor or sensory stimulation.

Contributions to muscle force and EMG by combined neural excitation and electrical stimulation

PubMed Central

Crago, Patrick E; Makowski, Nathaniel S; Cole, Natalie M

2014-01-01

Objective Stimulation of muscle for research or clinical interventions is often superimposed on ongoing physiological activity, without a quantitative understanding of the impact of the stimulation on the net muscle activity and the physiological response. Experimental studies show that total force during stimulation is less than the sum of the isolated voluntary and stimulated forces, but the occlusion mechanism is not understood. Approach We develop a model of efferent motor activity elicited by superimposing stimulation during a physiologically activated contraction. The model combines action potential interactions due to collision block, source resetting, and refractory periods with previously published models of physiological motor unit recruitment, rate modulation, force production, and EMG generation in human first dorsal interosseous muscle to investigate the mechanisms and effectiveness of stimulation on the net muscle force and EMG. Main Results Stimulation during a physiological contraction demonstrates partial occlusion of force and the neural component of the EMG, due to action potential interactions in motor units activated by both sources. Depending on neural and stimulation firing rates as well as on force-frequency properties, individual motor unit forces can be greater, smaller, or unchanged by the stimulation. In contrast, voluntary motor unit EMG potentials in simultaneously stimulated motor units show progressive occlusion with increasing stimulus rate. The simulations predict that occlusion would be decreased by a reverse stimulation recruitment order. Significance The results are consistent with and provide a mechanistic interpretation of previously published experimental evidence of force occlusion. The models also predict two effects that have not been reported previously - voluntary EMG occlusion and the advantages of a proximal stimulation site. This study provides a basis for the rational design of both future experiments and clinical neuroprosthetic interventions involving either motor or sensory stimulation. PMID:25242203

Neck injuries presenting to emergency departments in the United States from 1990 to 1999 for ice hockey, soccer, and American football

PubMed Central

Delaney, J; Al-Kashmiri, A

2005-01-01

Objective: To examine the number and rate of neck injuries in the community as a whole for ice hockey, soccer, and American football by analysing data from patients presenting to emergency departments in the United States from 1990 to 1999. Methods: Data compiled for the US Consumer Product Safety Commission were used to generate estimates for the total number of neck injuries and the more specific diagnoses of neck fractures, dislocations, contusions, sprains, strains, and lacerations occurring nationally from 1990 to 1999. These data were combined with yearly participation figures to generate rates of injury presenting to emergency departments for each sport. Results: There were an estimated 5038 neck injuries from ice hockey, 19 341 from soccer, and 114 706 from American football. These could be broken down as follows: 4964 contusions, sprains, or strains from ice hockey, 17 927 from soccer, and 104 483 from football; 105 neck fractures or dislocations from ice hockey, 214 from soccer, and 1588 from football; 199 neck lacerations for ice hockey, 0 for soccer, and 621 for football. The rates for total neck injuries and combined neck contusions, sprains, or strains were higher for football than for ice hockey or soccer in all years for which data were available. Conclusion: The rate of neck injury in the United States was higher in football than in ice hockey or soccer in the time period studied. PMID:15793079

Neck injuries presenting to emergency departments in the United States from 1990 to 1999 for ice hockey, soccer, and American football.

PubMed

Delaney, J S; Al-Kashmiri, A

2005-04-01

To examine the number and rate of neck injuries in the community as a whole for ice hockey, soccer, and American football by analysing data from patients presenting to emergency departments in the United States from 1990 to 1999. Data compiled for the US Consumer Product Safety Commission were used to generate estimates for the total number of neck injuries and the more specific diagnoses of neck fractures, dislocations, contusions, sprains, strains, and lacerations occurring nationally from 1990 to 1999. These data were combined with yearly participation figures to generate rates of injury presenting to emergency departments for each sport. There were an estimated 5038 neck injuries from ice hockey, 19,341 from soccer, and 114 706 from American football. These could be broken down as follows: 4964 contusions, sprains, or strains from ice hockey, 17,927 from soccer, and 104 483 from football; 105 neck fractures or dislocations from ice hockey, 214 from soccer, and 1588 from football; 199 neck lacerations for ice hockey, 0 for soccer, and 621 for football. The rates for total neck injuries and combined neck contusions, sprains, or strains were higher for football than for ice hockey or soccer in all years for which data were available. The rate of neck injury in the United States was higher in football than in ice hockey or soccer in the time period studied.

Modeling and optimization of poly(3hydroxybutyrate-co-3hydroxyvalerate) production from cane molasses by Azohydromonas lata MTCC 2311 in a stirred-tank reactor: effect of agitation and aeration regimes.

PubMed

Zafar, Mohd; Kumar, Shashi; Kumar, Surendra; Dhiman, Amit K

2012-07-01

The effects of agitation and aeration rates on copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] production by Azohydromonas lata MTCC 2311 using cane molasses supplemented with propionic acid in a bioreactor were investigated. The experiments were conducted in a three-level factorial design by varying the impeller (150-500 rev min(-1)) and aeration (0.5-1.5 vvm) rates. Further, the data were fitted to mathematical models [quadratic polynomial equation and artificial neural network (ANN)] and process variables were optimized by genetic algorithm-coupled models. ANN and hybrid ANN-GA were found superior for modeling and optimization of process variables, respectively. The maximum copolymer concentration of 7.45 g l(-1) with 21.50 mol% of 3HV was predicted at process variables: agitation speed, 287 rev min(-1); and aeration rate, 0.85 vvm, which upon validation gave 7.20 g l(-1) of P(3HB-co-3HV) with 21 mol% of 3HV with the prediction error (%) of 3.38 and 2.32, respectively. Agitation speed established a relative high importance of 72.19% than of aeration rate (27.80%) for copolymer accumulation. The volumetric gas-liquid mass transfer coefficient (k (L) a) was strongly affected by agitation and aeration rates. The highest P(3HB-co-3HV) productivity of 0.163 g l(-1) h(-1) was achieved at 0.17 s(-1) of k (L) a value. During the early phase of copolymer production process, 3HB monomers were accumulated, which were shifted to 3HV units (9-21%) during the cultivation period of 24-42 h. The enhancement of 7.5 and 34% were reported for P(3HB-co-3HV) production and 3HV content, respectively, by hybrid ANN-GA paradigm, which revealed the significant utilization of cane molasses for improved copolymer production.

Consumer products and activities associated with dental injuries to children treated in United States emergency departments, 1990-2003.

PubMed

Stewart, Gregory B; Shields, Brenda J; Fields, Sarah; Comstock, R Dawn; Smith, Gary A

2009-08-01

Describe the association of consumer products and activities with dental injuries among children 0-17 years of age treated in United States emergency departments. A retrospective analysis of data from the National Electronic Injury Surveillance System, 1990-2003. There was an average of 22 000 dental injuries annually among children <18 years of age during the study period, representing an average annual rate of 31.6 dental injuries per 100 000 population. Children with primary dentition (<7 years) sustained over half of the dental injuries recorded, and products/activities associated with home structures/furniture were the leading contributors. Floors, steps, tables, and beds were the consumer products within the home most associated with dental injuries. Outdoor recreational products/activities were associated with the largest number of dental injuries among children with mixed dentition (7-12 years); almost half of these were associated with the bicycle, which was the consumer product associated with the largest number of dental injuries. Among children with permanent teeth (13- to 17-year olds), sports-related products/activities were associated with the highest number of dental injuries. Of all sports, baseball and basketball were associated with the largest number of dental injuries. To our knowledge, this is the first study to evaluate dental injuries among children using a national sample. We identified the leading consumer products/activities associated with dental injuries to children with primary, mixed, and permanent dentition. Knowledge of these consumer products/activities allows for more focused and effective prevention strategies.

Map and Data for Quaternary Faults and Fault Systems on the Island of Hawai`i

USGS Publications Warehouse

Cannon, Eric C.; Burgmann, Roland; Crone, Anthony J.; Machette, Michael N.; Dart, Richard L.

2007-01-01

Introduction This report and digitally prepared, GIS-based map is one of a series of similar products covering individual states or regions of United States that show the locations, ages, and activity rates of major earthquake-related features such as faults and fault-related folds. It is part of a continuing the effort to compile a comprehensive Quaternary fault and fold map and database for the United States, which is supported by the U.S. Geological Survey's (USGS) Earthquake Hazards Program. Guidelines for the compilation of the Quaternary fault and fold maps for the United States were published by Haller and others (1993) at the onset of this project. This compilation of Quaternary surface faulting and folding in Hawai`i is one of several similar state and regional compilations that were planned for the United States. Reports published to date include West Texas (Collins and others, 1996), New Mexico (Machette and others, 1998), Arizona (Pearthree, 1998), Colorado (Widmann and others, 1998), Montana (Stickney and others, 2000), Idaho (Haller and others, 2005), and Washington (Lidke and others, 2003). Reports for other states such as California and Alaska are still in preparation. The primary intention of this compilation is to aid in seismic-hazard evaluations. The report contains detailed information on the location and style of faulting, the time of most recent movement, and assigns each feature to a slip-rate category (as a proxy for fault activity). It also contains the name and affiliation of the compiler, date of compilation, geographic and other paleoseismologic parameters, as well as an extensive set of references for each feature. The map (plate 1) shows faults, volcanic rift zones, and lineaments that show evidence of Quaternary surface movement related to faulting, including data on the time of most recent movement, sense of movement, slip rate, and continuity of surface expression. This compilation is presented as a digitally prepared map product and catalog of data, both in Adobe Acrobat PDF format. The senior authors (Eric C. Cannon and Roland Burgmann) compiled the fault data as part of ongoing studies of active faulting on the Island of Hawai`i. The USGS is responsible for organizing and integrating the State or regional products under their National Seismic Hazard Mapping project, including the coordination and oversight of contributions from individuals and groups (Michael N. Machette and Anthony J. Crone), database design and management (Kathleen M. Haller), and digitization and analysis of map data (Richard L. Dart). After being released an Open-File Report, the data in this report will be available online at http://earthquake.usgs.gov/regional/qfaults/, the USGS Quaternary Fault and Fold Database of the United States.

The relationship between annual survival rate and migration distance in mallards: an examination of the time-allocation hypothesis for the evolution of migration

USGS Publications Warehouse

Hestbeck, J.B.; Nichols, J.D.; Hines, J.E.

1992-01-01

Predictions of the time-allocation hypothesis were tested with several a posteriori analyses of banding data for the mallard (Anas platyrhynchos). The time-allocation hypothesis states that the critical difference between resident and migrant birds is their allocation of time to reproduction on the breeding grounds and survival on the nonbreeding grounds. Residents have higher reproduction and migrants have higher survival. Survival and recovery rates were estimated by standard band-recovery methods for banding reference areas in the central United States and central Canada. A production-rate index was computed for each reference area with data from the U.S. Fish and Wildlife Service May Breeding Population Survey and July Production Survey. An analysis of covariance was used to test for the effects of migration distance and time period (decade) on survival, recovery, and production rates. Differences in migration chronology were tested by comparing direct-recovery distributions for different populations during the fall migration. Differences in winter locations were tested by comparing distributions of direct recoveries reported during December and January. A strong positive relationship was found between survival rate, and migration distance for 3 of the 4 age and sex classes. A weak negative relationship was found between recovery rate and migration distance. No relationship was found between production rate and migration distance. During the fall migration, birds from the northern breeding populations were located north of birds from the southern breeding populations. No pattern could be found in the relative locations of breeding and wintering areas. Although our finding that survival rate increased with migration distance was consistent with the time-allocation hypothesis, our results on migration chronology and location of wintering areas were not consistent with the mechanism underlying the time-allocation hypothesis. Neither this analysis nor other recent studies of life-history characteristics of migratory and resident birds supported the timeallocation hypothesis.

Smoking in Top-Grossing US Movies, 2011

PubMed Central

Iaccopucci, Anne; Titus, Kori; Polansky, Jonathan R.

2012-01-01

We reviewed the number of incidents of tobacco use (almost exclusively smoking) depicted in movies in the United States in 2011 to compare that with previously reported trends. We counted use or implied use of a tobacco product by an actor in all movies whose box office gross ranked in the top 10 for at least 1 week. Total tobacco incidents per movie rose 7% from 2010 to 2011, ending 5 years of decline; incidents rose 34% per movie rated G, PG, or PG-13 and 7% per R-rated movie. The reversal of progress toward less onscreen smoking in youth-rated movies underscores the need to rate movies with tobacco imagery as R, establishing an industry-wide market incentive to keep youth-marketed movies tobacco-free. PMID:23017248

Study on the microwave catalytic pyrolysis characteristics and energy consumption analysis of oil shale

NASA Astrophysics Data System (ADS)

Chen, Chunxiang; Cheng, Zheng; Xu, Qing; Qin, Songheng

2018-04-01

In order to explore the high-efficient utilization of oil shale, the effects of different microwave powers and different kinds of catalysts (metal oxides and metal salts) on the temperature characteristics and product yield towards the oil shale are investigated by microwave catalytic pyrolysis. The results show that the effect of microwave power on the heating and pyrolysis rates of oil shale is significant, and the maximum output of shale oil is 5.1% when the microwave power is 1500W; CaO has a certain effect on the temperature rise of oil shale, and MgO and CuO have a certain degree of inhibition, but the addition of three kinds of metal oxidation is beneficial to increase the shale oil production; From the perspective of unit power consumption and gas production, the catalytic effect order of three kinds of metal oxides is MgO> CaO> CuO; The addition of three kinds of metal salts is favorable for the increase of pyrolysis temperature of oil shale, after adding 5% ZnCl2, the unit power consumption of shale oil and pyrolysis gas increases by 62.60% and 81.96% respectively. After adding 5% NaH2PO3, the unit power consumption of shale oil increases by 64.64%, and reduces by 9.56% by adding 5% MgCl2.

Life cycle assessment of biochar application in Vietnam using two pyrolysis technologies

NASA Astrophysics Data System (ADS)

Mohammadi, Ali; Cowie, Annette; Mai, Thi Lan Anh; Anaya de la Rosa, Ruy; Kristiansen, Paul; Brandão, Miguel; Joseph, Stephen

2016-04-01

This study presents a comparative analysis of the environmental impacts of biochar systems in Vietnam using household scale and district scale pyrolysis technologies. At the household scale, pyrolytic cook-stoves were assumed to be used by households to produce biochar. The pyrolytic cook-stoves burn pyrolysis gases and use the heat for cooking. At the district scale, the BIGchar 2200 unit, a continuous operation system, is utilised to convert rice husk to biochar. This unit allows for easy capture of produced gases, which can be used to generate energy products, adding value to biochar production and decreasing environmental costs through the displacement of fossil fuels. The biochar produced from each system was assumed to be applied to paddy rice fields. Results from Life Cycle Assessment showed that biochar production at the both scales for application to the soil significantly improved environmental performance of 1 Mg of rice husk relative to the reference scenario (open burning of husk) across a range of impacts including climate change (CC), particulate matter and non-renewable energy (NRE) use. Net carbon abatement of biochar systems ranged from 355 to 427 kg CO2-eq Mg-1 of spring rice husk at the household scale and district scale, respectively. The district scale offered greater carbon abatement primarily due to the higher rate of LPG displaced by this unit.

Estimating Net Primary Productivity Using Satellite and Ancillary Data

NASA Technical Reports Server (NTRS)

Choudhury, Bhaskar J.

2002-01-01

The net primary productivity (C) or the annual rate of carbon accumulation per unit ground area by terrestrial plant communities is the difference of gross photosynthesis (A(sub g)) and respiration (R) per unit ground area. Available field observations show that R is a large and variable fraction of A(sub g), although it is generally recognized that there are considerable difficulties in determining these fluxes, and thus pose challenge in assessing the accuracy. Further uncertainties arise in extrapolating field measurements (which are acquired over a hectare or so area) to regional scale. Here, an approach is presented for determining these fluxes using satellite and ancillary data to be representative of regional scale and allow assessment of interannual variation. A, has been expressed as the product of radiation use efficiency for gross photosynthesis by an unstressed canopy and intercepted photosynthetically active radiation, which is then adjusted for stresses due to soil water shortage and temperature away from optimum. R has been calculated as the sum of growth and maintenance components (respectively, R(sub g) and R(sub m)).The R(sub m) has been determined from nitrogen content of plant tissue per unit ground area, while R(sub g) has been obtained as a fraction of the difference of A(sub g) and R(sub m). Results for five consecutive years (1986-1990) are presented for the Amazon-Tocontins, Mississippi, and Ob River basins.

Biochemical bond breaking in coal: Third quarterly report, (April through June 1987)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-07-01

Major research efforts are presently being conducted in three principal areas of focus: (1) optimization of coal biosolubilization; (2) characterization of the solubilized products resulting from microbial coal depolymerization; and (3) degradation of model compounds to assess potential interunit linkages which may be attacked by whole culture or cell-free culture supernatants containing extracellular enzymes. Initial evaluations of the various combinations of microbes, coals, and coal pretreatments indicated that CP1 and CP1 + 2 solubilized all of the coals selected for this project at substantially higher rates than S. setonii or T. versicolor. The ARC CP1 + 2 consortium was chosenmore » as the primary culture for detailed evaluation of coal biosolubilization and model compound degradation. Studies were conducted to determine if solubilization of coal by CP1 + 2 supernatants could be enhanced by elevating the temperature. Solubilization of both untreated Leonardite and HNO3 treated Wyodak (Smith-Roland) subbituminous coal was increased when elevating the temperature from ambient to 35C. The initial solubilization rate (T0 - 1 hour) of Leonardite at 22C was 16 OD units/hour and at 35C was 18 OD units/hour. Thus, an elevation of 13C enhanced solubilization of this coal by 12.5%. The effect of temperature on solubilization of Wyodak coal appeared to be more pronounced. Solubilization of HNO3 treated coals by the CP organisms is not only relatively rapid, but is also extensive. The relatively rapid and extensive coal solubilization attainable by CP1 + 2 has enabled us to produce quantities of product sufficient for analytical methods development and for characterization of the coal products. Initial attempts have been made to characterize the depolymerized products using HPLC and GC/MS. 9 figs., 3 tabs.« less

Mexican Industrial Development Plans: Implications for United States Policy.

DTIC Science & Technology

1981-04-01

of strate- gies involving investments, credit, subsidies, insur- ance, commercialization, and a mass media approach to improving nutritional habits... nutrition to the poor, rural sectors. The instruments for seeking this re- sult are: 1. Preferential rates of credit for the production of corn and...storehouses and distribution centers in priority rural areas. SAM identifies 782 townships as "critical nutrition zones" which will receive the brunt of

Comparative Studies of Organizational Factors in Military Maintenance

DTIC Science & Technology

1977-10-01

be consistent throughout the military units interviewed. Military personnel received rewards for suggestions that save money as do civilian...willing to do (Swain, 1973). Traditional job design turned out not to have the expected economic savings due to high rates of turnover, absentee’^m...assumption of the latter approach is that high productivity will be maintained with high worker involvement in and identification with his job. Herzberg

McClellan AFB, California. Operable Unit B, Engineering Evaluation/Cost Analysis - Environmental Assessment

DTIC Science & Technology

1991-02-01

however, ’the daily flow rate can dramatically increase during storm events due to rainwater infiltration, to the system . Treatment processes include...132 has been restricted from supplying water to the local distribution system , except in emergency situations. This well was being threatened by...the near surface aquifer upgradient from the production well. The extracted groundwater will be treated in a granular activated carbon system and

Preliminary test results from the CELSS Test Facility Engineering Development Unit

NASA Technical Reports Server (NTRS)

Kliss, Mark H.; Macelroy, R. D.; Blackwell, C. C.; Borchers, B. A.; Drews, M. E.; Longabaugh, J. R.; Yendler, B. S.; Zografos, A. I.

1994-01-01

As part of the NASA Controlled Ecological Life Support System (CELSS) Program, a CELSS Test Facility (CTF) is being planned for installation on the Space Station. The CTF will be used to provide data on the productivity and efficiency of a variety of CELSS higher plant crops grown in the microgravity environment of the Space Station. Tight environmental control will be maintained while data on gas exchange rates and biomass accumulation rates are collected. In order to obtain an early realistic determination of the subsystem and system requirements necessary to provide the environmental conditions specified for CTF crop productivity experiments, an Engineering Development Unit (EDU) has been designed, constructed and is in the process of subsystem and system testing at NASA Ames Research Center. The EDU is a ground test-bed which will be used to characterize the integrated performance of major subsystem technologies, to evaluate hardware candidates and control strategies required for the CTF, and to further define the ability to meet CTF requirements within present Space Station constraints. This paper reviews the functional requirements for the EDU, and focuses on the performance evaluation and test results of the various subsystems. Preliminary integrated performance results and control system operation are addressed, and plans for future science and technology testing are discussed.

Optimal pricing and lot-sizing for perishable inventory with price and time dependent ramp-type demand

NASA Astrophysics Data System (ADS)

Panda, S.; Saha, S.; Basu, M.

2013-01-01

Product perishability is an important aspect of inventory control. To minimise the effect of deterioration, retailers in supermarkets, departmental store managers, etc. always want higher inventory depletion rate. In this article, we propose a dynamic pre- and post-deterioration cumulative discount policy to enhance inventory depletion rate resulting low volume of deterioration cost, holding cost and hence higher profit. It is assumed that demand is a price and time dependent ramp-type function and the product starts to deteriorate after certain amount of time. Unlike the conventional inventory models with pricing strategies, which are restricted to a fixed number of price changes and to a fixed cycle length, we allow the number of price changes before as well as after the start of deterioration and the replenishment cycle length to be the decision variables. Before start of deterioration, discounts on unit selling price are provided cumulatively in successive pricing cycles. After the start of deterioration, discounts on reduced unit selling price are also provided in a cumulative way. A mathematical model is developed and the existence of the optimal solution is verified. A numerical example is presented, which indicates that under the cumulative effect of price discounting, dynamic pricing policy outperforms static pricing strategy. Sensitivity analysis of the model is carried out.

Materials flow of indium in the United States in 2008 and 2009

USGS Publications Warehouse

Goonan, Thomas G.

2012-01-01

Indium is a material that has many applications. It is used by anyone who watches television or views a computer screen. It is found in solar energy arrays and in soldering applications that are required to be lead free. In 2009, about 550 metric tons (t) of indium metal was produced from primary sources world-wide; it was estimated that the United States consumed about 110 t of indium metal (20 percent of world primary production). However, when imports of consumer products that contain indium are considered, the United States consumed about 200 t of indium (36 percent of world primary production). When one considers the recovery from the low-efficiency sputtering process that coats indium-tin oxide onto glass and other surfaces, the recycling rate (within the manufacturing process that uses indium-tin oxide in flat panel displays approaches 36 percent. However, indium recovery from old scrap generated from end-of-life consumer products is not sufficiently economic to add significantly to secondary production. Between 1988 and 2010, indium prices averaged $381 per kilogram (in constant 2000 dollars). However, prices have been quite volatile (deviating from the average of $381 per kilogram by ±$199 per kilogram, a 52 percent difference from the average), reflecting short-term disequilibrium of supply and demand but also responsiveness of supply to demand. The dynamics of zinc smelting govern the primary supply of indium because indium is a byproduct of zinc smelting. Secondary indium supply, which accounts for about one-half of total indium supply, is governed by indium prices and technological advances in recovery. Indium demand is expected to grow because the number and volume of cutting edge technology applications that depend on indium are expected to grow.

Life stage and species identity affect whether habitat subsidies enhance or simply redistribute consumer biomass.

PubMed

Keller, Danielle A; Gittman, Rachel K; Bouchillon, Rachel K; Fodrie, F Joel

2017-10-01

Quantifying the response of mobile consumers to changes in habitat availability is essential for determining the degree to which population-level productivity is habitat limited rather than regulated by other, potentially density-independent factors. Over landscape scales, this can be explored by monitoring changes in density and foraging as habitat availability varies. As habitat availability increases, densities may: (1) decrease (unit-area production decreases; weak habitat limitation); (2) remain stable (unit-area production remains stable; habitat limitation) or (3) increase (unit-area production increases; strong habitat limitation). We tested the response of mobile estuarine consumers over 5 months to changes in habitat availability in situ by comparing densities and feeding rates on artificial reefs that were or were not adjacent to neighbouring artificial reefs or nearby natural reefs. Using either constructed or natural reefs to manipulate habitat availability, we documented threefold density decreases among juvenile stone crabs as habitat increased (i.e. weak habitat imitation). However, for adult stone crabs, density remained stable across treatments, demonstrating that habitat limitation presents a bottleneck in this species' later life history. Oyster toadfish densities also did not change with increasing habitat availability (i.e. habitat limitation), but densities of other cryptic fishes decreased as habitat availability increased (i.e. weak limitation). Feeding and abundance data suggested that some mobile fishes experience habitat limitation, or, potentially in one case, strong limitation across our habitat manipulations. These findings of significant, community-level habitat limitation provide insight into how global declines in structurally complex estuarine habitats may have reduced the fishery production of coastal ecosystems. © 2017 The Authors. Journal of Animal Ecology © 2017 British Ecological Society.

Grazing management and supplementation effects on forage and dairy cow performance on cool-season pastures in the southeastern United States.

PubMed

Macoon, B; Sollenberger, L E; Staples, C R; Portier, K M; Fike, J H; Moore, J E

2011-08-01

Cool-season annual forages provide high-quality herbage for up to 5 mo in the US Gulf Coast states, but their management in pasture-based dairy systems has received little attention. Objectives of this study were to evaluate pasture and animal responses when lactating Holstein cows (n=32, mean DIM=184±21) grazed either N-fertilized rye (Secale cereale L.)-annual ryegrass (Lolium multiflorum Lam.) mixed pastures or rye-annual ryegrass-crimson clover (Trifolium incarnatum L.)-red clover (Trifolium pratense L.) pastures at 2 stocking rates (5 vs. 2.5 cows/ha) and 2 rates of concentrate supplementation [0.29 or 0.40 kg of supplement (as is)/kg of daily milk production]. Two cows paired by parity (one multiparous and one primiparous) were assigned randomly to each pasture. The 2 × 2 × 2 factorial arrangement of treatments was replicated twice in a completely randomized design. Forage mixture and supplementation rate did not affect milk production during three 28-d periods. Greater milk production occurred at the low (19.7 kg/d) than the high (14.7 kg/d) stocking rate during periods 2 and 3, but production was similar during period 1. Despite lower production per cow, milk production per hectare was generally greater at the high stocking rate (81.6 vs. 49.5 kg/ha). Generally, greater pregraze herbage mass on pastures at the lower stocking rate (1,400 vs. 1,150 kg/ha) accounted for greater herbage allowance. Both forage (8.0 vs. 5.9 kg/d) and total (14.1 vs. 11.6) organic matter intake were greater at the low stocking rate. Cows fed less supplement had greater forage organic matter intake (8.0 vs. 6.1 kg/d). Greater herbage mass was associated with the greater intake and subsequent greater milk production. Differences in forage nutritive value, blood metabolites and milk composition, although showing some response to treatments, may not be of sufficient magnitude to affect choice of pasture species or other management practices. Animal performance was not improved by adding clovers to mixed cool-season grass pastures like those in this study. Stocking rate had a major effect on pasture and animal performance. During the cool season, supplementation with concentrates should be planned based on estimated energy intake from forages to achieve optimum milk production and ensure maintenance of body condition. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

27 CFR 41.140 - Taxpayment in the United States.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Into the United States Deferred Payment of Tax in Puerto Rico on Tobacco Products § 41.140 Taxpayment in the United States. Every manufacturer of tobacco products or cigarette papers or tubes in the United States who receives Puerto Rican tobacco products or cigarette papers or tubes without payment of...

27 CFR 41.140 - Taxpayment in the United States.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Into the United States Deferred Payment of Tax in Puerto Rico on Tobacco Products § 41.140 Taxpayment in the United States. Every manufacturer of tobacco products or cigarette papers or tubes in the United States who receives Puerto Rican tobacco products or cigarette papers or tubes without payment of...

77 FR 840 - Pricing for 2012 Products Featuring $1 Coins

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... DEPARTMENT OF THE TREASURY United States Mint Pricing for 2012 Products Featuring $1 Coins AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing 2012 pricing for products featuring $1 coins, as follows: Product Retail price Presidential $1...

78 FR 3083 - Revised Pricing for Five 2013 Products

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... DEPARTMENT OF THE TREASURY United States Mint Revised Pricing for Five 2013 Products AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing revised pricing for five 2013 products. Please see the table below. 2013 retail Product price...

Dissolved organic carbon concentration controls benthic primary production: results from in situ chambers in north-temperate lakes

USGS Publications Warehouse

Godwin, Sean C.; Jones, Stuart E.; Weidel, Brian C.; Solomon, Christopher T.

2014-01-01

We evaluated several potential drivers of primary production by benthic algae (periphyton) in north-temperate lakes. We used continuous dissolved oxygen measurements from in situ benthic chambers to quantify primary production by periphyton at multiple depths across 11 lakes encompassing a broad range of dissolved organic carbon (DOC) and total phosphorous (TP) concentrations. Light-use efficiency (primary production per unit incident light) was inversely related to average light availability (% of surface light) in 7 of the 11 study lakes, indicating that benthic algal assemblages exhibit photoadaptation, likely through physiological or compositional changes. DOC alone explained 86% of the variability in log-transformed whole-lake benthic production rates. TP was not an important driver of benthic production via its effects on nutrient and light availability. This result is contrary to studies in other systems, but may be common in relatively pristine north-temperate lakes. Our simple empirical model may allow for the prediction of whole-lake benthic primary production from easily obtained measurements of DOC concentration.

Finished with Menthol: An Evidence-Based Policy Option That Will Save Lives.

PubMed

Lester, Joelle M; Gagosian, Stacey Younger

2017-03-01

Smoking remains the leading cause of preventable disease and death in the United States, killing approximately 480,000 people each year. This crushing health burden falls disproportionately, and recent CDC data shows that large disparities in adult cigarette smoking remain. One factor in these disparities is the use of flavors. Menthol cigarettes and other flavored tobacco products are used at higher rates by vulnerable populations including youth and young adults, African Americans, women, Hispanics and Asian Americans. This is no accident; the tobacco industry has long targeted these same groups. Given FDA's failure to act to ban flavored tobacco products, states and municipalities are considering taking matters into their own hands to protect their communities from these dangerous products. The authors will explore state and local authority to restrict the sales of these products and review the evidence base indicating that removing flavored tobacco products - and menthol combustible products in particular - from the market would significantly reduce the toll of illness and death caused by these products.

Dynamic Model Improves Agronomic and Environmental Outcomes for Maize Nitrogen Management over Static Approach.

PubMed

Sela, Shai; van Es, Harold M; Moebius-Clune, Bianca N; Marjerison, Rebecca; Moebius-Clune, Daniel; Schindelbeck, Robert; Severson, Keith; Young, Eric

2017-03-01

Large temporal and spatial variability in soil nitrogen (N) availability leads many farmers across the United States to over-apply N fertilizers in maize ( L.) production environments, often resulting in large environmental N losses. Static Stanford-type N recommendation tools are typically promoted in the United States, but new dynamic model-based decision tools allow for highly adaptive N recommendations that account for specific production environments and conditions. This study compares the Corn N Calculator (CNC), a static N recommendation tool for New York, to Adapt-N, a dynamic simulation tool that combines soil, crop, and management information with real-time weather data to estimate optimum N application rates for maize. The efficiency of the two tools in predicting the Economically Optimum N Rate (EONR) is compared using field data from 14 multiple N-rate trials conducted in New York during the years 2011 through 2015. The CNC tool was used with both realistic grower-estimated potential yields and those extracted from the CNC default database, which were found to be unrealistically low when compared with field data. By accounting for weather and site-specific conditions, the Adapt-N tool was found to increase the farmer profits and significantly improve the prediction of the EONR (RMSE = 34 kg ha). Furthermore, using a dynamic instead of a static approach led to reduced N application rates, which in turn resulted in substantially lower simulated environmental N losses. This study shows that better N management through a dynamic decision tool such as Adapt-N can help reduce environmental impacts while sustaining farm economic viability. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Sperm count as a surrogate endpoint for male fertility control.

PubMed

Benda, Norbert; Gerlinger, Christoph

2007-11-30

When assessing the effectiveness of a hormonal method of fertility control in men, the classical approach used for the assessment of hormonal contraceptives in women, by estimating the pregnancy rate or using a life-table analysis for the time to pregnancy, is difficult to apply in a clinical development program. The main reasons are the dissociation of the treated unit, i.e. the man, and the observed unit, i.e. his female partner, the high variability in the frequency of male intercourse, the logistical cost and ethical concerns related to the monitoring of the trial. A reasonable surrogate endpoint of the definite endpoint time to pregnancy is sperm count. In addition to the avoidance of the mentioned problems, trials that compare different treatments are possible with reasonable sample sizes, and study duration can be shorter. However, current products do not suppress sperm production to 100 per cent in all men and the sperm count is only observed with measurement error. Complete azoospermia might not be necessary in order to achieve an acceptable failure rate compared with other forms of male fertility control. Therefore, the use of sperm count as a surrogate endpoint must rely on the results of a previous trial in which both the definitive- and surrogate-endpoint results were assessed. The paper discusses different estimation functions of the mean pregnancy rate (corresponding to the cumulative hazard) that are based on the results of sperm count trial and a previous trial in which both sperm count and time to pregnancy were assessed, as well as the underlying assumptions. Sample size estimations are given for pregnancy rate estimation with a given precision.

Development of a modularized two-step (M2S) chromosome integration technique for integration of multiple transcription units in Saccharomyces cerevisiae.

PubMed

Li, Siwei; Ding, Wentao; Zhang, Xueli; Jiang, Huifeng; Bi, Changhao

2016-01-01

Saccharomyces cerevisiae has already been used for heterologous production of fuel chemicals and valuable natural products. The establishment of complicated heterologous biosynthetic pathways in S. cerevisiae became the research focus of Synthetic Biology and Metabolic Engineering. Thus, simple and efficient genomic integration techniques of large number of transcription units are demanded urgently. An efficient DNA assembly and chromosomal integration method was created by combining homologous recombination (HR) in S. cerevisiae and Golden Gate DNA assembly method, designated as modularized two-step (M2S) technique. Two major assembly steps are performed consecutively to integrate multiple transcription units simultaneously. In Step 1, Modularized scaffold containing a head-to-head promoter module and a pair of terminators was assembled with two genes. Thus, two transcription units were assembled with Golden Gate method into one scaffold in one reaction. In Step 2, the two transcription units were mixed with modules of selective markers and integration sites and transformed into S. cerevisiae for assembly and integration. In both steps, universal primers were designed for identification of correct clones. Establishment of a functional β-carotene biosynthetic pathway in S. cerevisiae within 5 days demonstrated high efficiency of this method, and a 10-transcriptional-unit pathway integration illustrated the capacity of this method. Modular design of transcription units and integration elements simplified assembly and integration procedure, and eliminated frequent designing and synthesis of DNA fragments in previous methods. Also, by assembling most parts in Step 1 in vitro, the number of DNA cassettes for homologous integration in Step 2 was significantly reduced. Thus, high assembly efficiency, high integration capacity, and low error rate were achieved.

Riparian Meadow Response to Modern Conservation Grazing Management

NASA Astrophysics Data System (ADS)

Oles, Kristin M.; Weixelman, Dave A.; Lile, David F.; Tate, Kenneth W.; Snell, Laura K.; Roche, Leslie M.

2017-09-01

Riparian meadows occupy a small proportion of the public lands in the western United States but they provide numerous ecosystem services, including the production of high-quality forage for livestock grazing. Modern conservation management strategies (e.g., reductions in livestock stocking rates and adoption of new riparian grazing standards) have been implemented to better balance riparian conservation and livestock production objectives on publicly managed lands. We examined potential relationships between long-term changes in plant community, livestock grazing pressure and environmental conditions at two spatial scales in meadows grazed under conservation management strategies. Changes in plant community were not associated with either livestock stocking rate or precipitation at the grazing allotment (i.e., administrative) scale. Alternatively, both grazing pressure and precipitation had significant, albeit modest, associations with changes in plant community at the meadow (i.e., ecological site) scale. These results suggest that reductions in stocking rate have improved the balance between riparian conservation and livestock production goals. However, associations between elevation, site wetness, precipitation, and changes in plant community suggest that changing climate conditions (e.g., reduced snowpack and changes in timing of snowmelt) could trigger shifts in plant communities, potentially impacting both conservation and agricultural services (e.g., livestock and forage production). Therefore, adaptive, site-specific management strategies are required to meet grazing pressure limits and safeguard ecosystem services within individual meadows, especially under more variable climate conditions.

Riparian Meadow Response to Modern Conservation Grazing Management.

PubMed

Oles, Kristin M; Weixelman, Dave A; Lile, David F; Tate, Kenneth W; Snell, Laura K; Roche, Leslie M

2017-09-01

Riparian meadows occupy a small proportion of the public lands in the western United States but they provide numerous ecosystem services, including the production of high-quality forage for livestock grazing. Modern conservation management strategies (e.g., reductions in livestock stocking rates and adoption of new riparian grazing standards) have been implemented to better balance riparian conservation and livestock production objectives on publicly managed lands. We examined potential relationships between long-term changes in plant community, livestock grazing pressure and environmental conditions at two spatial scales in meadows grazed under conservation management strategies. Changes in plant community were not associated with either livestock stocking rate or precipitation at the grazing allotment (i.e., administrative) scale. Alternatively, both grazing pressure and precipitation had significant, albeit modest, associations with changes in plant community at the meadow (i.e., ecological site) scale. These results suggest that reductions in stocking rate have improved the balance between riparian conservation and livestock production goals. However, associations between elevation, site wetness, precipitation, and changes in plant community suggest that changing climate conditions (e.g., reduced snowpack and changes in timing of snowmelt) could trigger shifts in plant communities, potentially impacting both conservation and agricultural services (e.g., livestock and forage production). Therefore, adaptive, site-specific management strategies are required to meet grazing pressure limits and safeguard ecosystem services within individual meadows, especially under more variable climate conditions.

Effect of superdosing phytase on productive performance and egg quality in laying hens.

PubMed

Kim, Jong Hyuk; Pitargue, Franco Martinez; Jung, Hyunjung; Han, Gi Ppeum; Choi, Hyeon Seok; Kil, Dong Yong

2017-07-01

An experiment was conducted to determine the effect of superdosing phytase on productive performance and egg quality in laying hens. A total of 200 42-wk-old Hy-Line Brown laying hens were allotted into 1 of 5 dietary treatments with 5 replicates consisting of 8 hens per replicate. The positive control (PC) and negative control diets (NC) were prepared based on the recommended P levels in layer diets. Supplemental phytase was added to the negative control diet at 10,000 (SD10), 20,000 (SD20), or 30,000 (SD30) fytase units (FTU)/kg. Productive performance was summarized for 6 weeks from 42 weeks to 47 weeks of age. Egg quality was assessed from 4 eggs per replicate randomly collected at the conclusion of the experiment. The SD20 treatment had greater (p<0.05) hen-day egg production than PC, NC, and SD10 treatment groups. There was no difference in hen-day egg production between SD20 and SD30 treatment groups. However, SD30 treatment had greater (p<0.05) hen-day egg production than PC treatment, but showed no difference in hen-day egg production as compared to NC and SD10 treatment groups. However, egg weight, egg mass, feed intake, and feed conversion ratio were not affected by dietary treatments. Egg quality including eggshell strength, eggshell color, egg yolk color, and haugh unit was not influenced by dietary treatments. Superdosing level of 20,000 FTU/kg phytase in diets has a positive effect on egg production rate, but no beneficial effect on egg quality in laying hens.

Methane production and emissions from four reclaimed and pristine wetlands of Southeastern United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schipper, L.A.; Reddy, K.R.

Wetlands are significant contributors to global CH[sub 4] emission. We measured CH[sub 4] emissions at two pristine wetlands [Okefenokee swamp and the Everglades (Water Conservation Area 2A)] and two reclaimed wetlands (Sunny Hill Farm and Apopka Marsh) in Southeastern USA, and we attempted to relate emissions to CH[sub 4] production rates of the soil and the soil's biological and chemical properties. Methane emissions through cattail [Typha sp.] and waterilly [Nymphaea ordorata (L.)] ranged from 0.09 to 1.7 g CH[sub 4] m[sup [minus]2] d[sup [minus]1] and exhibited high spatial and temporal variability. Diffusive flux of CH[sub 4] was calculated using dissolvedmore » CH[sub 4] profiles in the soil pore water and accounted for <5% of the plant-mediated emissions. Potential CH[sub 4] production rates were measured as a function of depth using soil samples obtained at 2-cm increments. Methane production rates were the same order of magnitude at all sites (<1-70 ng CH[sub 4]-C g[sup [minus]1] soil C d[sup [minus]1]) and were highest in the surface soils (0-6 cm) at three of the wetland sites, indicating that the predominant source of C available to methanogens was in the surface soils. Methane production rates in the top 24 cm ranged from 0.3 to 1.1 g CH[sub 4] m[sup [minus]2] d[sup [minus]1] and annual C losses due to anaerobic decomposition accounted for between 0.68 and 3.7% of the total C in the surface 24-cm soil depth. 36 refs., 3 figs., 3 tabs.« less

Correlating methane production to microbiota in anaerobic digesters fed synthetic wastewater.

PubMed

Venkiteshwaran, K; Milferstedt, K; Hamelin, J; Fujimoto, M; Johnson, M; Zitomer, D H

2017-03-01

A quantitative structure activity relationship (QSAR) between relative abundance values and digester methane production rate was developed. For this, 50 triplicate anaerobic digester sets (150 total digesters) were each seeded with different methanogenic biomass samples obtained from full-scale, engineered methanogenic systems. Although all digesters were operated identically for at least 5 solids retention times (SRTs), their quasi steady-state function varied significantly, with average daily methane production rates ranging from 0.09 ± 0.004 to 1 ± 0.05 L-CH 4 /L R -day (L R  = Liter of reactor volume) (average ± standard deviation). Digester microbial community structure was analyzed using more than 4.1 million partial 16S rRNA gene sequences of Archaea and Bacteria. At the genus level, 1300 operational taxonomic units (OTUs) were observed across all digesters, whereas each digester contained 158 ± 27 OTUs. Digester function did not correlate with typical biomass descriptors such as volatile suspended solids (VSS) concentration, microbial richness, diversity or evenness indices. However, methane production rate did correlate notably with relative abundances of one Archaeal and nine Bacterial OTUs. These relative abundances were used as descriptors to develop a multiple linear regression (MLR) QSAR equation to predict methane production rates solely based on microbial community data. The model explained over 66% of the variance in the experimental data set based on 149 anaerobic digesters with a standard error of 0.12 L-CH 4 /L R -day. This study provides a framework to relate engineered process function and microbial community composition which can be further expanded to include different feed stocks and digester operating conditions in order to develop a more robust QSAR model. Copyright © 2016 Elsevier Ltd. All rights reserved.

The effect of difference frequency on electrocommunication: chirp production and encoding in a species of weakly electric fish, Apteronotus leptorhynchus.

PubMed

Hupé, Ginette J; Lewis, John E; Benda, Jan

2008-01-01

The brown ghost knifefish, Apteronotus leptorhynchus, is a model wave-type gymnotiform used extensively in neuroethological studies. As all weakly electric fish, they produce an electric field (electric organ discharge, EOD) and can detect electric signals in their environments using electroreceptors. During social interactions, A. leptorhynchus produce communication signals by modulating the frequency and amplitude of their EOD. The Type 2 chirp, a transient increase in EOD frequency, is the most common modulation type. We will first present a description of A. leptorhynchus chirp production from a behavioural perspective, followed by a discussion of the mechanisms by which chirps are encoded by electroreceptor afferents (P-units). Both the production and encoding of chirps are influenced by the difference in EOD frequency between interacting fish, the so-called beat or difference frequency (Df). Chirps are produced most often when the Df is small, whereas attacks are more common when Dfs are large. Correlation analysis has shown that chirp production induces an echo response in interacting conspecifics and that chirps are produced when attack rates are low. Here we show that both of these relationships are strongest when Dfs are large. Electrophysiological recordings from electroreceptor afferents (P-units) have suggested that small, Type 2 chirps are encoded by increases in electroreceptor synchrony at low Dfs only. How Type 2 chirps are encoded at higher Dfs, where the signals seem to exert the greatest behavioural influence, was unknown. Here, we provide evidence that at higher Dfs, chirps could be encoded by a desynchronization of the P-unit population activity.

Optimization of the management of platelet concentrate stocks in the Basque Country using mathematical simulation.

PubMed

Pérez Vaquero, M Á; Gorria, C; Lezaun, M; López, F J; Monge, J; Eguizabal, C; Vesga, M A

2016-05-01

The management of platelet concentrate (PC) stocks is not simple given their short shelf life and variable demand. In general, managers decide on PC production based on personal experience. The objective of this study was to provide a tool to help decide how many PC units to produce each day in a more rational and objective way. From the historical data on PCs produced, transfused and discarded in the Basque Country in 2012, a mathematical model was built, based on the normality of the time series of the transfusions performed on each day of the week throughout the year. This model was implemented in an easy-to-use Excel spreadsheet and validated using real production data from 2013. Comparing with real 2013 data, in the best scenario, the number of PC units that expired was 87·7% lower, PC production, 14·3% lower and the age of the PCs transfused nearly 1-day younger in the simulation. If we want to ensure a minimum stock at the end of each day, the outdating rate and average age of the transfused PCs progressively increase. The practical application of the designed tool can facilitate decision-making about how many PC units to produce each day, resulting in very significant reductions in PC production and wastage and corresponding cost savings, together with an almost 1 day decrease in the mean age of PCs transfused. © 2016 The Authors. Vox Sanguinis published by John Wiley & Sons Ltd on behalf of International Society of Blood Transfusion.

76 FR 41525 - Hewlett Packard Global Parts Supply Chain, Global Product Life Cycles Management Unit Including...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-14

... Parts Supply Chain, Global Product Life Cycles Management Unit Including Teleworkers Reporting to... workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit...). Since eligible workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles...

The construction and operation of a low-cost poultry waste digester.

PubMed

Steinsberger, S C; Shih, J C

1984-05-01

A simple and low-cost poultry waste digester (PWD) was constructed to treat the waste from 4000 caged laying hens on University Research Unit No. 2 at North Carolina State University. The system was built basically of a plastic lining with insulation, a heating system, a hot-water tank, and other metering equipment. It was operated at 50 degrees C and pH 7.5-8.0. The initiation of methane production was achieved using the indigenous microflora in the poultry waste. At an optimal loading rate (7.5 kg volatile solids/m(3) day), the PWD produced biogas (55% methane) at a rate of 4.0 m(3)/m(3) day. The PWD was biologically stable and able to tolerate temporary overloads and shutdowns. A higher loading rate failed to maintain a high gas production rate and caused drops in methane content and pH value. Under optimal conditions, a positive energy balance was demonstrated with a net surplus of 50.6% of the gross energy. For methane production, the PWD system was proved to be technically feasible. The simple design and inexpensive materials used for this model could significantly reduce the cost of digestion compared to more conventional systems. More studies are needed to determine the durability, the required maintenance of the system, and the most economical method of biogas and solid residue utilization.

[Multiple pregnancies prevalence: its raise on last decade].

PubMed

Herrera, Ricardo Jorge Hernández; Torres, Mauro Ochoa; Santos, Roberto Flores; Flores, Raúl Cortés; Sánchez, Gerardo Forsbasch

2008-09-01

Multiple pregnancies prevalence has been increasing in last decade, which have also increased the requirements of neonatal intensive care units and all problems related to premature neonate or low birth weight. Prevalence rate of twin (18 to 26 in 1,000 births), and triple pregnancies (0.37 to 1.74 in 1,000 births) have raised too, perhaps due to assisted reproductive techniques. To know incidence of multiple pregnancies at Unidad Medica de Alta Especialidad no. 23, from Institute Mexicano del Seguro Social. Retrospective and descriptive study. We review the files of multiple pregnancies from 1972 to 2006 to estimate its rate and change every five and ten years. We registered 9,055 twin pregnancies during the period, with a rate of 7.1 to 14.4 in 1,000 (63% of increase in the last decade [12.6 in 1,000 births] compared with the previous decade [7.7 in 1,000 births]; p < 0.005). Pregnancies with three or more fetuses were 202, with 191 triplets, 13 with four, three with five, and one with six products (646 newborns). Incidence of multiple pregnancies with four or more products has also increased in last decade: 230 times higher than two decades before. Multiple pregnancies rate has increased in last decade: 63% in twin pregnancies, 217% in triplets, and 230 times more than expected in four or more products pregnancies.

Development of an advanced anaerobic digester design and a kinetic model for biogasification of water hyacinth/sludge blends

DOE Office of Scientific and Technical Information (OSTI.GOV)

Srivastava, V.; Fannin, K.F.; Biljetina, R.

1986-07-01

The Institute of Gas Technology (IGT) conducted a comprehensive laboratory-scale research program to develop and optimize the anaerobic digestion process for producing methane from water hyacinth and sludge blends. This study focused on digester design and operating techniques, which gave improved methane yields and production rates over those observed using conventional digesters. The final digester concept and the operating experience was utilized to design and operate a large-scale experimentla test unit (ETU) at Walt Disney World, Florida. This paper describes the novel digester design, operating techniques, and the results obtained in the laboratory. The paper also discusses a kinetic modelmore » which predicts methane yield, methane production rate, and digester effluent solids as a function of retention time. This model was successfully utilized to predict the performance of the ETU. 15 refs., 6 figs., 6 tabs.« less

ELT-572(v)2 DIRCM: simulation, system design and DTE process to protect ItAF platforms against ManPADS

NASA Astrophysics Data System (ADS)

Borriello, G.; Bonori, V.; Cresti, M.; Dente, E.; Ideo, L.; Mazzi, G.; Usai, A.; Tafuto, A.; Togna, F.

2014-10-01

In this paper authors provide a description of the currently deployed Man Portable Air Defense System (ManPADS) heat-seeking missiles. Principles of IR seeking and Aircraft signatures are shortly described. Basic information are listed on currently designed Infra-Red Counter Measure Systems, intended to protect Aircrafts against ManPADS. Authors provide an overview on ELT-572(v)2 DIRCM Program, funded by Italian Air Force, currently in low rate production phase. Description of the Design and Development phase, completed in Elettronica SpA in 2013, is reported. Development Test and Evaluation (DTE) Activities on ELT-572(v)2 DIRCM, jointly performed by Elettronica Spa and Italian Air Force Flight Test Centre, are shortly described. A summary of tests and some results are also discussed. Platform Installation Programs, using the low rate production units from ELT-572(v)2 DIRCM Program, are finally listed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paget, Maria L.; McCullough, Jeffrey J.; Steward, Heidi E.

Solid-state lighting products for general lighting applications are now gaining a market presence, and more and more people are asking, “Which of these are ‘good’ products? Do they perform as claimed? How do they compare? Light Emitting Diodes (LEDs) differ from other light sources enough to require new procedures for measuring their performance and comparing to other lighting options, so both manufacturers and buyers are facing a learning curve. The energy-efficiency community has traditionally compared light sources based on system efficacy: rated lamp lumens divided by power into the system. This doesn’t work for LEDs because there are no standardmore » LED “lamp” packages and no lamp ratings, and because LED performance depends heavily on thermal, electrical, and optical design of complete lighting unit or ‘luminaire’. Luminaire efficacy is the preferred metric for LEDs because it measures the net light output from the luminaire divided by power into the system.« less

Induced earthquakes. Sharp increase in central Oklahoma seismicity since 2008 induced by massive wastewater injection.

PubMed

Keranen, K M; Weingarten, M; Abers, G A; Bekins, B A; Ge, S

2014-07-25

Unconventional oil and gas production provides a rapidly growing energy source; however, high-production states in the United States, such as Oklahoma, face sharply rising numbers of earthquakes. Subsurface pressure data required to unequivocally link earthquakes to wastewater injection are rarely accessible. Here we use seismicity and hydrogeological models to show that fluid migration from high-rate disposal wells in Oklahoma is potentially responsible for the largest swarm. Earthquake hypocenters occur within disposal formations and upper basement, between 2- and 5-kilometer depth. The modeled fluid pressure perturbation propagates throughout the same depth range and tracks earthquakes to distances of 35 kilometers, with a triggering threshold of ~0.07 megapascals. Although thousands of disposal wells operate aseismically, four of the highest-rate wells are capable of inducing 20% of 2008 to 2013 central U.S. seismicity. Copyright © 2014, American Association for the Advancement of Science.

Alcohol tax pass-through across the product and price range: do retailers treat cheap alcohol differently?

PubMed

Ally, Abdallah K; Meng, Yang; Chakraborty, Ratula; Dobson, Paul W; Seaton, Jonathan S; Holmes, John; Angus, Colin; Guo, Yelan; Hill-McManus, Daniel; Brennan, Alan; Meier, Petra S

2014-12-01

Effective use of alcohol duty to reduce consumption and harm depends partly on retailers passing duty increases on to consumers via price increases, also known as 'pass-through'. The aim of this analysis is to provide evidence of UK excise duty and sales tax (VAT) pass-through rates for alcohol products at different price points. March 2008 to August 2011, United Kingdom. Panel data quantile regression estimating the effects of three duty changes, two VAT changes and one combined duty and VAT change on UK alcohol prices, using product-level supermarket price data for 254 alcohol products available weekly. Products were analysed in four categories: beers, ciders/ready to drink (RTDs), spirits and wines. Within all four categories there exists considerable heterogeneity in the level of duty pass-through for cheaper versus expensive products. Price increases for the cheapest 15% of products fall below duty rises (undershifting), while products sold above the median price are overshifted (price increases are higher than duty increases). The level of undershifting is greatest for beer [0.85 (0.79, 0.92)] and spirits [0.86 (0.83, 0.89)]. Undershifting affects approximately 67% of total beer sales and 38% of total spirits sales. Alcohol retailers in the United Kingdom appear to respond to increases in alcohol tax by undershifting their cheaper products (raising prices below the level of the tax increase) and overshifting their more expensive products (raising prices beyond the level of the tax increase). This is likely to impact negatively on tax policy effectiveness, because high-risk groups favour cheaper alcohol and undershifting is likely to produce smaller consumption reductions. © 2014 Society for the Study of Addiction.

Performance evaluation of vinasse treatment plant integrated with physico-chemical methods.

PubMed

Ojha, Sanjay Kumar; Mishra, Snehasish; Kumar, Satish; Mohanty, Shakti Shankar; Sarkar, Biplab; Singh, Monika; Chaudhury, Gautam Roy

2015-11-01

With an objective to assess environmental management criteria of a vinasse treatment plant (VTP) and to evaluate the critical environmental parameters, a study was undertaken in a multi-product (packaged apple juice, distillery, brewery, packaged drinking water) brewery-cum-distillery unit. The facility with a volumetric loading rate of 11-15 kg COD m(-3).day, 3.6-4.5 h hydraulic retention time and 20 g l(-1) VSS had a scientifically managed technically sound effluent treatment system. While the water quality parameters were found within the acceptable limits, there was 99.07% reduction in BOD, from 43140.0 to 398.0 mg l(-1) and 98.61% reduction in COD from 98003.0 to 1357.0 mg l(-1). There was appreciable improvement in mixed liquor suspended solids (MLSS), mixed liquorvolatile suspended solids (MLVSS) and sludge volume index (SVI). A striking feature was the integrated aerobic-anaerobic highly efficient Up-flow Anaerobic Sludge Blanket (UASB) treatment for biodegradation and energy production that reduced energy and space needs, producing utilisable end-products and net savings on the operational cost. The end-point waste management included terminal products such as fertile sludge, cattle feed supplement, recyclable water and biogas. Vast lagoons with combined aerobic-anaerobic approaches, biogasification unit, sludge recovery, remediated irrigable water were the notable attributes.

Association Between Direct-to-Consumer Advertising and Testosterone Testing and Initiation in the United States, 2009–2013

PubMed Central

Layton, J. Bradley; Kim, Yoonsang; Alexander, G. Caleb; Emery, Sherry L.

2017-01-01

IMPORTANCE Testosterone initiation increased substantially in the United States from 2000 to 2013, especially among men without clear indications. Direct-to-consumer advertising (DTCA) also increased during this time. OBJECTIVE To investigate associations between televised DTCA and testosterone testing and initiation in the United States. DESIGN, SETTING, AND POPULATION Ecologic study conducted in designated market areas (DMAs) in the United States. Monthly testosterone advertising ratings were linked to DMA-level testosterone use data from 2009–2013 derived from commercial insurance claims. Associations between DTCA and testosterone testing, initiation, and initiation without recent baseline tests were estimated using Poisson generalized estimating equations. EXPOSURES Monthly Nielsen ratings for testosterone DTCA in the 75 largest DMAs. MAIN OUTCOMES AND MEASURES (1) Rates of new serum testosterone testing; (2) rates of testosterone initiation (in-office injection, surgical implant, or pharmacy dispensing) for all testosterone products combined and for specific brands; and (3) rates of testosterone initiation without recent serum testosterone testing. RESULTS Of 17 228 599 commercially insured men in the 75 DMAs, 1 007 990 (mean age, 49.6 [SD, 11.5] years) had new serum testosterone tests and 283 317 (mean age, 51.8 [SD, 11.3] years) initiated testosterone treatment. Advertising intensity varied by geographic region and time, with the highest intensity seen in the southeastern United States and with months ranging from no ad exposures to a mean of 13.6 exposures per household. Nonbranded advertisements were common prior to 2012, with branded advertisements becoming more common during and after 2012. Each household advertisement exposure was associated with a monthly increase in rates of new testosterone testing (rate ratio [RR], 1.006; 95% CI, 1.004–1.008), initiation (RR, 1.007; 95% CI, 1.004–1.010), and initiation without a recent test (RR, 1.008; 95% CI, 1.002–1.013). Mean absolute rate increases were 0.14 tests (95% CI, 0.09–0.19), 0.05 new initiations (95% CI, 0.03–0.08), and 0.02 initiations without a recent test (95% CI, 0.01–0.03) per 10 000 men for each monthly ad exposure over the entire period. CONCLUSIONS AND RELEVANCE Among US men residing in the 75 designated market areas, regional exposure to televised direct-to-consumer advertising was associated with greater testosterone testing, new initiation, and initiation without recent testing. PMID:28324090

Solar thermochemical processing system and method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wegeng, Robert S.; Humble, Paul H.; Krishnan, Shankar

A solar thermochemical processing system is disclosed. The system includes a first unit operation for receiving concentrated solar energy. Heat from the solar energy is used to drive the first unit operation. The first unit operation also receives a first set of reactants and produces a first set of products. A second unit operation receives the first set of products from the first unit operation and produces a second set of products. A third unit operation receives heat from the second unit operation to produce a portion of the first set of reactants.

Combining land use data acquired from Landsat with soil map data

NASA Technical Reports Server (NTRS)

Westin, F. C.; Brandner, T. M.

1981-01-01

A method currently used to derive agrophysical units (APUs), i.e., geographical areas having definable/comparable agronomic and physical parameters which reflect a range in agricultural use and management, is discussed with reference to results obtained for South Dakota and an area in China. The method consists of combining agricultural land use data acquired from Landsat with soil map data. The resulting map units are soil associations characterized by cropland use intensity, and they can be used to identify major cropland areas and to develop a rating reflecting the relative potential of the soils in the delineated area for crop production, as well as to update small-scale soil maps.

Development of a portable, modular unit for the optimization of ultrasound-assisted oxidative desulfurization of diesel

NASA Astrophysics Data System (ADS)

Wan, Meng-Wei

Due to the stringent rules requiring ultra-low sulfur content in diesel fuels, it is necessary to develop alternative methods of desulfurization of fossil fuel derived oil, such as diesel. Current technology is not sufficient to solve this problem. Ultrasound applied to oxidative desulfurization which combined three complementary techniques: ultrasonication, phase transfer catalysis (PTC) and transition metal catalyzed oxidation, has accomplished high sulfur removal in a short contact time at ambient temperature and atmospheric pressure. This research has successfully demonstrated that the higher oxidation efficiency of BT to BTO and free of any by-products by using tetraoctylammonium fluoride as phase transfer agent. The oxidation rate of BT to BTO increased with increasing the carbon chain length of QAS cations. Under the same length of carbon chain, the oxidation rate of BT to BTO increased with decreasing the molecular size of QAS anions. Moreover, for diesel fuels containing various levels of sulfur content, UAOD process followed by solvent extraction has demonstrated that the sulfur reduction can reach above 95 % removal efficiency or final sulfur content below 15 ppm in mild condition. For large-scale commercial production, this research has successfully developed and operated a continuous desulfurization unit, which consists of a sonoractor, an RF amplifier, a function generator, a pretreatment tank, and a pipeline system. A single unit only needed 2' x 4' x 1' space for installation. The results indicated that the remarkable 92% removal efficiency for the sulfur in marine logistic diesel, even at a treatment rate as high as 25 lb/hour which is approximately 2 barrels per day. Therefore, this sonoreactor demonstrated the feasibility of large-scale operation even in a relatively small installation with low capital investment and maintenance cost. It also ensures the safety considerations by operating with diluted hydrogen peroxide under ambient temperature and pressure.

Experience of ALCOA-KOFEM with MHD induction stirrer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petho, S.

1996-10-01

Every ingot cast shop makes an effort to reduce the costs and to increase the productivity. The MHD stirrer is an adequate tool to achieve a more economical production. The electromagnetic stirrer accelerates the melting rate of the charge, reduces the metal loss and improves the consistency of ingot quality. The Ingot Business Unit of ALCOA-KOFEM operates seven melting furnaces. Each furnace is equipped with a POTOK type MHD induction stirrer in order to achieve a more profitable melting operation. Magnetohydrodynamic stirrers were installed between 1988 and 1990 on melting furnaces ranging in capacity from 25 to 60 tons ofmore » molten metal.« less

Does humor in radio advertising affect recognition of novel product brand names?

PubMed

Berg, E M; Lippman, L G

2001-04-01

The authors proposed that item selection during shopping is based on brand name recognition rather than recall. College students rated advertisements and news stories of a simulated radio program for level of amusement (orienting activity) before participating in a surprise recognition test. Humor level of the advertisements was varied systematically, and content was controlled. According to signal detection analysis, humor did not affect the strength of recognition memory for brand names (nonsense units). However, brand names and product types were significantly more likely to be associated when appearing in humorous advertisements than in nonhumorous advertisements. The results are compared with prior findings concerning humor and recall.

A study on pyrolysis of Canada thistle (Cirsium arvense) with titania based catalysts for bio-fuel production.

PubMed

Aysu, Tevfik

2016-11-01

The catalytic pyrolysis of Cirsium arvense was performed with titania supported catalysts under the operating conditions of 500°C, 40°C/min heating rate, 100mL/min N2 flow rate in a fixed bed reactor for biofuel production. The effect of catalysts on product yields was investigated. The amount of pyrolysis products (bio-char, bio-oil, gas) and the composition of the produced bio-oils were determined by proton nuclear magnetic resonance ((1)H NMR), Fourier transform infrared spectroscopy (FT-IR), gas chromatography/mass spectrometry (GC-MS) and elemental analysis (EA) techniques. Thistle bio-oils had lower O/C and H/C molar ratios compared to feedstock. The highest bio-char and bio-oil yields of 29.32wt% and 36.71wt% were obtained in the presence of Ce/TiO2 and Ni/TiO2 catalysts respectively. GC-MS identified 97 different compounds in the bio-oils obtained from thistle pyrolysis. (1)H NMR analysis showed that the bio-oils contained ∼55-77% aliphatic and ∼6-19% aromatic structural units. Copyright © 2016 Elsevier Ltd. All rights reserved.