Dynamic thermoregulation of the sample in flow cytometry.

PubMed

Graves, Steven W; Habbersett, Robert C; Nolan, John P

2002-05-01

Fine control of temperature is an important capability for any analytical platform. A circulating water bath has been the traditional means of maintaining constant temperature in the sample chamber of a flow cytometer, but this approach does not permit rapid changes in sample temperature. This unit explains the use of Peltier modules for regulation of sample temperature. The heat pumping generated by the passage of current through properly matched semiconductors, known as the Peltier effect, makes it possible for these thermoelectric modules to both heat and cool. The authors describe the construction of a Peltier module based thermoregulation unit in step-by-step detail and present a demonstration of flow cytometry measurements as a function of temperature.

Nonlinear mathematical modeling and sensitivity analysis of hydraulic drive unit

NASA Astrophysics Data System (ADS)

Kong, Xiangdong; Yu, Bin; Quan, Lingxiao; Ba, Kaixian; Wu, Liujie

2015-09-01

The previous sensitivity analysis researches are not accurate enough and also have the limited reference value, because those mathematical models are relatively simple and the change of the load and the initial displacement changes of the piston are ignored, even experiment verification is not conducted. Therefore, in view of deficiencies above, a nonlinear mathematical model is established in this paper, including dynamic characteristics of servo valve, nonlinear characteristics of pressure-flow, initial displacement of servo cylinder piston and friction nonlinearity. The transfer function block diagram is built for the hydraulic drive unit closed loop position control, as well as the state equations. Through deriving the time-varying coefficient items matrix and time-varying free items matrix of sensitivity equations respectively, the expression of sensitivity equations based on the nonlinear mathematical model are obtained. According to structure parameters of hydraulic drive unit, working parameters, fluid transmission characteristics and measured friction-velocity curves, the simulation analysis of hydraulic drive unit is completed on the MATLAB/Simulink simulation platform with the displacement step 2 mm, 5 mm and 10 mm, respectively. The simulation results indicate that the developed nonlinear mathematical model is sufficient by comparing the characteristic curves of experimental step response and simulation step response under different constant load. Then, the sensitivity function time-history curves of seventeen parameters are obtained, basing on each state vector time-history curve of step response characteristic. The maximum value of displacement variation percentage and the sum of displacement variation absolute values in the sampling time are both taken as sensitivity indexes. The sensitivity indexes values above are calculated and shown visually in histograms under different working conditions, and change rules are analyzed. Then the sensitivity indexes values of four measurable parameters, such as supply pressure, proportional gain, initial position of servo cylinder piston and load force, are verified experimentally on test platform of hydraulic drive unit, and the experimental research shows that the sensitivity analysis results obtained through simulation are approximate to the test results. This research indicates each parameter sensitivity characteristics of hydraulic drive unit, the performance-affected main parameters and secondary parameters are got under different working conditions, which will provide the theoretical foundation for the control compensation and structure optimization of hydraulic drive unit.

A Simulation Study of the Overdetermined Geodetic Boundary Value Problem Using Collocation

DTIC Science & Technology

1989-03-01

9 APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED GEOPHYSICS LABORATORY AIR FORCE SYSTEMS COMMAND UNITED STATES AIR FORCE HANSCOM AIR FORCE BASE...linearized integral equation is obtained through an infinite system of integral equations which is solved step by step by means of Stokes’ function. The...computed. Since 9 and W = W(9) 4 are known on the boundary, then the boundary is known in the new coordinate system . The serious disadvantage of this

Vocal Development as a Guide to Modeling the Evolution of Language.

PubMed

Oller, D Kimbrough; Griebel, Ulrike; Warlaumont, Anne S

2016-04-01

Modeling of evolution and development of language has principally utilized mature units of spoken language, phonemes and words, as both targets and inputs. This approach cannot address the earliest phases of development because young infants are unable to produce such language features. We argue that units of early vocal development-protophones and their primitive illocutionary/perlocutionary forces-should be targeted in evolutionary modeling because they suggest likely units of hominin vocalization/communication shortly after the split from the chimpanzee/bonobo lineage, and because early development of spontaneous vocal capability is a logically necessary step toward vocal language, a root capability without which other crucial steps toward vocal language capability are impossible. Modeling of language evolution/development must account for dynamic change in early communicative units of form/function across time. We argue for interactive contributions of sender/infants and receiver/caregivers in a feedback loop involving both development and evolution and propose to begin computational modeling at the hominin break from the primate communicative background. Copyright © 2016 Cognitive Science Society, Inc.

Mechanical design and driving mechanism of an isokinetic functional electrical stimulation-based leg stepping trainer.

PubMed

Hamzaid, N A; Fornusek, C; Ruys, A; Davis, G M

2007-12-01

The mechanical design of a constant velocity (isokinetic) leg stepping trainer driven by functional electrical stimulation-evoked muscle contractions was the focus of this paper. The system was conceived for training the leg muscles of neurologically-impaired patients. A commercially available slider crank mechanism for elliptical stepping exercise was adapted to a motorized isokinetic driving mechanism. The exercise system permits constant-velocity pedalling at cadences of 1-60 rev x min(-1). The variable-velocity feature allows low pedalling forces for individuals with very weak leg muscles, yet provides resistance to higher pedalling effort in stronger patients. In the future, the system will be integrated with a computer-controlled neuromuscular stimulator and a feedback control unit to monitor training responses of spinal cord-injured, stroke and head injury patients.

Realisation of all 16 Boolean logic functions in a single magnetoresistance memory cell

NASA Astrophysics Data System (ADS)

Gao, Shuang; Yang, Guang; Cui, Bin; Wang, Shouguo; Zeng, Fei; Song, Cheng; Pan, Feng

2016-06-01

Stateful logic circuits based on next-generation nonvolatile memories, such as magnetoresistance random access memory (MRAM), promise to break the long-standing von Neumann bottleneck in state-of-the-art data processing devices. For the successful commercialisation of stateful logic circuits, a critical step is realizing the best use of a single memory cell to perform logic functions. In this work, we propose a method for implementing all 16 Boolean logic functions in a single MRAM cell, namely a magnetoresistance (MR) unit. Based on our experimental results, we conclude that this method is applicable to any MR unit with a double-hump-like hysteresis loop, especially pseudo-spin-valve magnetic tunnel junctions with a high MR ratio. Moreover, after simply reversing the correspondence between voltage signals and output logic values, this method could also be applicable to any MR unit with a double-pit-like hysteresis loop. These results may provide a helpful solution for the final commercialisation of MRAM-based stateful logic circuits in the near future.Stateful logic circuits based on next-generation nonvolatile memories, such as magnetoresistance random access memory (MRAM), promise to break the long-standing von Neumann bottleneck in state-of-the-art data processing devices. For the successful commercialisation of stateful logic circuits, a critical step is realizing the best use of a single memory cell to perform logic functions. In this work, we propose a method for implementing all 16 Boolean logic functions in a single MRAM cell, namely a magnetoresistance (MR) unit. Based on our experimental results, we conclude that this method is applicable to any MR unit with a double-hump-like hysteresis loop, especially pseudo-spin-valve magnetic tunnel junctions with a high MR ratio. Moreover, after simply reversing the correspondence between voltage signals and output logic values, this method could also be applicable to any MR unit with a double-pit-like hysteresis loop. These results may provide a helpful solution for the final commercialisation of MRAM-based stateful logic circuits in the near future. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr03169b

Step-by-Step Simulation of Radiation Chemistry Using Green Functions for Diffusion-Influenced Reactions

NASA Technical Reports Server (NTRS)

Plante, Ianik; Cucinotta, Francis A.

2011-01-01

Radiolytic species are formed approximately 1 ps after the passage of ionizing radiation through matter. After their formation, they diffuse and chemically react with other radiolytic species and neighboring biological molecules, leading to various oxidative damage. Therefore, the simulation of radiation chemistry is of considerable importance to understand how radiolytic species damage biological molecules [1]. The step-by-step simulation of chemical reactions is difficult, because the radiolytic species are distributed non-homogeneously in the medium. Consequently, computational approaches based on Green functions for diffusion-influenced reactions should be used [2]. Recently, Green functions for more complex type of reactions have been published [3-4]. We have developed exact random variate generators of these Green functions [5], which will allow us to use them in radiation chemistry codes. Moreover, simulating chemistry using the Green functions is which is computationally very demanding, because the probabilities of reactions between each pair of particles should be evaluated at each timestep [2]. This kind of problem is well adapted for General Purpose Graphic Processing Units (GPGPU), which can handle a large number of similar calculations simultaneously. These new developments will allow us to include more complex reactions in chemistry codes, and to improve the calculation time. This code should be of importance to link radiation track structure simulations and DNA damage models.

Personal customizing exercise with a wearable measurement and control unit.

PubMed

Wang, Zhihui; Kiryu, Tohru; Tamura, Naoki

2005-06-28

Recently, wearable technology has been used in various health-related fields to develop advanced monitoring solutions. However, the monitoring function alone cannot meet all the requirements of customizing machine-based exercise on an individual basis by relying on biosignal-based controls. We propose a new wearable unit design equipped with measurement and control functions to support the customization process. The wearable unit can measure the heart rate and electromyogram signals during exercise performance and output workload control commands to the exercise machines. The workload is continuously tracked with exercise programs set according to personally customized workload patterns and estimation results from the measured biosignals by a fuzzy control method. Exercise programs are adapted by relying on a computer workstation, which communicates with the wearable unit via wireless connections. A prototype of the wearable unit was tested together with an Internet-based cycle ergometer system to demonstrate that it is possible to customize exercise on an individual basis. We tested the wearable unit in nine people to assess its suitability to control cycle ergometer exercise. The results confirmed that the unit could successfully control the ergometer workload and continuously support gradual changes in physical activities. The design of wearable units equipped with measurement and control functions is an important step towards establishing a convenient and continuously supported wellness environment.

Preparation of a Corannulene-functionalized Hexahelicene by Copper(I)-catalyzed Alkyne-azide Cycloaddition of Nonplanar Polyaromatic Units.

PubMed

Álvarez, Celedonio M; Barbero, Héctor; Ferrero, Sergio

2016-09-18

The main purpose of this video is to show 6 reaction steps of a convergent synthesis and prepare a complex molecule containing up to three nonplanar polyaromatic units, which are two corannulene moieties and a racemic hexahelicene linking them. The compound described in this work is a good host for fullerenes. Several common organic reactions, such as free-radical reactions, C-C coupling or click chemistry, are employed demonstrating the versatility of functionalization that this compound can accept. All of these reactions work for planar aromatic molecules. With subtle modifications, it is possible to achieve similar results for nonplanar polyaromatic compounds.

Experimental verification of ion stopping power prediction from dual energy CT data in tissue surrogates

NASA Astrophysics Data System (ADS)

Farace, Paolo

2014-11-01

A two-steps procedure is presented to convert dual-energy CT data to stopping power ratio (SPR), relative to water. In the first step the relative electron density (RED) is calculated from dual-energy CT-numbers by means of a bi-linear relationship: RED = a HUscH + b HUscL + c, where HUscH and HUscL are scaled units (HUsc = HU + 1000) acquired at high and low energy respectively, and the three parameters a, b and c has to be determined for each CT scanner. In the second step the RED values were converted into SPR by means of published poly-line functions, which are invariant as they do not depend on a specific CT scanner. The comparison with other methods provides encouraging results, with residual SPR error on human tissue within 1%. The distinctive features of the proposed method are its simplicity and the generality of the conversion functions.

Experimental verification of ion stopping power prediction from dual energy CT data in tissue surrogates.

PubMed

Farace, Paolo

2014-11-21

A two-steps procedure is presented to convert dual-energy CT data to stopping power ratio (SPR), relative to water. In the first step the relative electron density (RED) is calculated from dual-energy CT-numbers by means of a bi-linear relationship: RED=a HUscH+b HUscL+c, where HUscH and HUscL are scaled units (HUsc=HU+1000) acquired at high and low energy respectively, and the three parameters a, b and c has to be determined for each CT scanner. In the second step the RED values were converted into SPR by means of published poly-line functions, which are invariant as they do not depend on a specific CT scanner. The comparison with other methods provides encouraging results, with residual SPR error on human tissue within 1%. The distinctive features of the proposed method are its simplicity and the generality of the conversion functions.

Real-time control of hind limb functional electrical stimulation using feedback from dorsal root ganglia recordings

NASA Astrophysics Data System (ADS)

Bruns, Tim M.; Wagenaar, Joost B.; Bauman, Matthew J.; Gaunt, Robert A.; Weber, Douglas J.

2013-04-01

Objective. Functional electrical stimulation (FES) approaches often utilize an open-loop controller to drive state transitions. The addition of sensory feedback may allow for closed-loop control that can respond effectively to perturbations and muscle fatigue. Approach. We evaluated the use of natural sensory nerve signals obtained with penetrating microelectrode arrays in lumbar dorsal root ganglia (DRG) as real-time feedback for closed-loop control of FES-generated hind limb stepping in anesthetized cats. Main results. Leg position feedback was obtained in near real-time at 50 ms intervals by decoding the firing rates of more than 120 DRG neurons recorded simultaneously. Over 5 m of effective linear distance was traversed during closed-loop stepping trials in each of two cats. The controller compensated effectively for perturbations in the stepping path when DRG sensory feedback was provided. The presence of stimulation artifacts and the quality of DRG unit sorting did not significantly affect the accuracy of leg position feedback obtained from the linear decoding model as long as at least 20 DRG units were included in the model. Significance. This work demonstrates the feasibility and utility of closed-loop FES control based on natural neural sensors. Further work is needed to improve the controller and electrode technologies and to evaluate long-term viability.

Real-time control of hind limb functional electrical stimulation using feedback from dorsal root ganglia recordings

PubMed Central

Bruns, Tim M; Wagenaar, Joost B; Bauman, Matthew J; Gaunt, Robert A; Weber, Douglas J

2013-01-01

Objective Functional electrical stimulation (FES) approaches often utilize an open-loop controller to drive state transitions. The addition of sensory feedback may allow for closed-loop control that can respond effectively to perturbations and muscle fatigue. Approach We evaluated the use of natural sensory nerve signals obtained with penetrating microelectrode arrays in lumbar dorsal root ganglia (DRG) as real-time feedback for closed-loop control of FES-generated hind limb stepping in anesthetized cats. Main results Leg position feedback was obtained in near real-time at 50 ms intervals by decoding the firing rates of more than 120 DRG neurons recorded simultaneously. Over 5 m of effective linear distance was traversed during closed-loop stepping trials in each of two cats. The controller compensated effectively for perturbations in the stepping path when DRG sensory feedback was provided. The presence of stimulation artifacts and the quality of DRG unit sorting did not significantly affect the accuracy of leg position feedback obtained from the linear decoding model as long as at least 20 DRG units were included in the model. Significance This work demonstrates the feasibility and utility of closed-loop FES control based on natural neural sensors. Further work is needed to improve the controller and electrode technologies and to evaluate long-term viability. PMID:23503062

WebStart WEPS: Remote data access and model execution functionality added to WEPS

USDA-ARS?s Scientific Manuscript database

The Wind Erosion Prediction System (WEPS) is a daily time step, process based wind erosion model developed by the United States Department of Agriculture - Agricultural Research Service (USDA-ARS). WEPS simulates climate and management driven changes to the surface/vegetation/soil state on a daily b...

22 CFR 101.2 - Promotion of American interests.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Promotion of American interests. 101.2 Section... FUNCTIONS § 101.2 Promotion of American interests. Officers of the Foreign Service shall further the.... (g) By taking appropriate steps to facilitate the promotion of such import trade into the United...

Expression of interest: transcriptomics and the designation of conservation units.

PubMed

Hansen, Michael M

2010-05-01

An important task within conservation genetics consists in defining intraspecific conservation units. Most conceptual frameworks involve two steps: (i) identifying demographically independent units, and (ii) evaluating their degree of adaptive divergence. Whereas a plethora of methods are available for delineating genetic population structure, assessment of functional genetic divergence remains a challenge. In this issue, Tymchuk et al. (2010) study Atlantic salmon (Salmo salar) populations using both microsatellite markers and analysis of global gene expression. They show that important gene expression differences exist that can be interpreted in the context of different ecological conditions experienced by the populations, along with the populations' histories. This demonstrates an important potential role of transcriptomics for designating conservation units.

Personal customizing exercise with a wearable measurement and control unit

PubMed Central

Wang, Zhihui; Kiryu, Tohru; Tamura, Naoki

2005-01-01

Background Recently, wearable technology has been used in various health-related fields to develop advanced monitoring solutions. However, the monitoring function alone cannot meet all the requirements of customizing machine-based exercise on an individual basis by relying on biosignal-based controls. We propose a new wearable unit design equipped with measurement and control functions to support the customization process. Methods The wearable unit can measure the heart rate and electromyogram signals during exercise performance and output workload control commands to the exercise machines. The workload is continuously tracked with exercise programs set according to personally customized workload patterns and estimation results from the measured biosignals by a fuzzy control method. Exercise programs are adapted by relying on a computer workstation, which communicates with the wearable unit via wireless connections. A prototype of the wearable unit was tested together with an Internet-based cycle ergometer system to demonstrate that it is possible to customize exercise on an individual basis. Results We tested the wearable unit in nine people to assess its suitability to control cycle ergometer exercise. The results confirmed that the unit could successfully control the ergometer workload and continuously support gradual changes in physical activities. Conclusion The design of wearable units equipped with measurement and control functions is an important step towards establishing a convenient and continuously supported wellness environment. PMID:15982425

Realisation of all 16 Boolean logic functions in a single magnetoresistance memory cell.

PubMed

Gao, Shuang; Yang, Guang; Cui, Bin; Wang, Shouguo; Zeng, Fei; Song, Cheng; Pan, Feng

2016-07-07

Stateful logic circuits based on next-generation nonvolatile memories, such as magnetoresistance random access memory (MRAM), promise to break the long-standing von Neumann bottleneck in state-of-the-art data processing devices. For the successful commercialisation of stateful logic circuits, a critical step is realizing the best use of a single memory cell to perform logic functions. In this work, we propose a method for implementing all 16 Boolean logic functions in a single MRAM cell, namely a magnetoresistance (MR) unit. Based on our experimental results, we conclude that this method is applicable to any MR unit with a double-hump-like hysteresis loop, especially pseudo-spin-valve magnetic tunnel junctions with a high MR ratio. Moreover, after simply reversing the correspondence between voltage signals and output logic values, this method could also be applicable to any MR unit with a double-pit-like hysteresis loop. These results may provide a helpful solution for the final commercialisation of MRAM-based stateful logic circuits in the near future.

An integrated direct loop-mediated isothermal amplification microdevice incorporated with an immunochromatographic strip for bacteria detection in human whole blood and milk without a sample preparation step.

PubMed

Lee, Dohwan; Kim, Yong Tae; Lee, Jee Won; Kim, Do Hyun; Seo, Tae Seok

2016-05-15

We have developed an integrated direct loop-mediated isothermal amplification (Direct LAMP) microdevice incorporated with an immunochromatographic strip (ICS) to identify bacteria contaminated in real samples. The Direct LAMP is a novel isothermal DNA amplification technique which does not require thermal cycling steps as well as any sample preparation steps such as cell lysis and DNA extraction for amplifying specific target genes. In addition, the resultant amplicons were colorimetrically detected on the ICS, thereby enabling the entire genetic analysis process to be simplified. The two functional units (Direct LAMP and ICS) were integrated on a single device without use of the tedious and complicated microvalve and tubing systems. The utilization of a slidable plate allows us to manipulate the fluidic control in the microchannels manually and the sequential operation of the Direct LAMP and ICS detection could be performed by switching the slidable plate to each functional unit. Thus, the combination of the direct isothermal amplification without any sample preparation and thermal cycling steps, the ICS based amplicon detection by naked eyes, and the slidable plate to eliminate the microvalves in the integrated microdevice would be an ideal platform for point-of-care DNA diaganotics. On the integrated Direct LAMP-ICS microdevice, we could analyze Staphylococcus aureus (S. aureus) and Escherichia coli O157:H7 (E. coli O157:H7) contaminated in human whole blood or milk at a single-cell level within 1h. Copyright © 2015 Elsevier B.V. All rights reserved.

A Low Vision Orientation and Mobility Curriculum to Assist in Preparing Students for Contemporary Living.

ERIC Educational Resources Information Center

Vopata, Alvin E.

An orientation and mobility curriculum developed in Tulare County, California, includes 30 units for legally blind, partially sighted, multi-impaired, and low functioning sighted students in grades K through 12. Each section includes eight steps to teach basic concepts. Assessment guidelines are used to determine strengths and deficiencies. The 30…

Programme Costing - A Logical Step Toward Improved Management.

ERIC Educational Resources Information Center

McDougall, Ronald N.

The analysis of costs of university activities from a functional or program point of view, rather than an organizational unit basis, is not only an imperative for the planning and management of universities, but also a logical method of examing the costs of university operations. A task force of the Committee of Finance Officers-Universities of…

Automated selection of synthetic biology parts for genetic regulatory networks.

PubMed

Yaman, Fusun; Bhatia, Swapnil; Adler, Aaron; Densmore, Douglas; Beal, Jacob

2012-08-17

Raising the level of abstraction for synthetic biology design requires solving several challenging problems, including mapping abstract designs to DNA sequences. In this paper we present the first formalism and algorithms to address this problem. The key steps of this transformation are feature matching, signal matching, and part matching. Feature matching ensures that the mapping satisfies the regulatory relationships in the abstract design. Signal matching ensures that the expression levels of functional units are compatible. Finally, part matching finds a DNA part sequence that can implement the design. Our software tool MatchMaker implements these three steps.

Advanced PIC-MCC simulation for the investigation of step-ionization effect in intermediate-pressure capacitively coupled plasmas

NASA Astrophysics Data System (ADS)

Kim, Jin Seok; Hur, Min Young; Kim, Chang Ho; Kim, Ho Jun; Lee, Hae June

2018-03-01

A two-dimensional parallelized particle-in-cell simulation has been developed to simulate a capacitively coupled plasma reactor. The parallelization using graphics processing units is applied to resolve the heavy computational load. It is found that the step-ionization plays an important role in the intermediate gas pressure of a few Torr. Without the step-ionization, the average electron density decreases while the effective electron temperature increases with the increase of gas pressure at a fixed power. With the step-ionization, however, the average electron density increases while the effective electron temperature decreases with the increase of gas pressure. The cases with the step-ionization agree well with the tendency of experimental measurement. The electron energy distribution functions show that the population of electrons having intermediate energy from 4.2 to 12 eV is relaxed by the step-ionization. Also, it was observed that the power consumption by the electrons is increasing with the increase of gas pressure by the step-ionization process, while the power consumption by the ions decreases with the increase of gas pressure.

Readily functionalized AAA-DDD triply hydrogen-bonded motifs.

PubMed

Tong, Feng; Linares-Mendez, Iamnica J; Han, Yi-Fei; Wisner, James A; Wang, Hong-Bo

2018-04-25

Herein we present a new, readily functionalized AAA-DDD hydrogen bond array. A novel AAA monomeric unit (3a-b) was obtained from a two-step synthetic procedure starting with 2-aminonicotinaldehyde via microwave radiation (overall yield of 52-66%). 1H NMR and fluorescence spectroscopy confirmed the complexation event with a calculated association constant of 1.57 × 107 M-1. Likewise, the usefulness of this triple hydrogen bond motif in supramolecular polymerization was demonstrated through viscosity measurements in a crosslinked supramolecular alternating copolymer.

Identification of stepped changes of binding affinity during interactions between the disintegrin rhodostomin and integrin αIIbβ3 in living cells using optical tweezers

NASA Astrophysics Data System (ADS)

Hsieh, Chia-Fen; Chang, Bo-Jui; Pai, Chyi-Huey; Chen, Hsuan-Yi; Chi, Sien; Hsu, Long; Tsai, Jin-Wu; Lin, Chi-Hung

2004-10-01

Integrin receptors serve as both mechanical links and signal transduction mediators between the cell and its environment. Experimental evidence demonstrates that conformational changes and lateral clustering of the integrin proteins may affect their binding to ligands and regulate downstream cellular responses; however, experimental links between the structural and functional correlations of the ligand-receptor interactions are not yet elucidated. In the present report, we utilized optical tweezers to measure the dynamic binding between the snake venom rhodostomin, coated on a microparticle and functioned as a ligand, and the membrane receptor integrin alpha(IIb)beta(3) expressed on a Chinese Hamster Ovary (CHO) cell. A progressive increase of total binding affinity was found between the bead and CHO cell in the first 300 sec following optical tweezers-guided contact. Further analysis of the cumulative data revealed the presence of "unit binding force" presumably exerted by a single rhodostomin-integrin pair. Interestingly, two such units were found. Among the measurements of less total binding forces, presumably taken at the early stage of ligand-receptor interactions, a unit of 4.15 pN per molecule pair was derived. This unit force dropped to 2.54 pN per molecule pair toward the later stage of interactions when the total binding forces were relatively large. This stepped change of single molecule pair binding affinity was not found when mutant rhodostomin proteins were used as ligands (a single unit of 1.81 pN per pair was found). These results were interpreted along with the current knowledge about the conformational changes of integrins during the "molecule activation" process.

Symptoms, functioning and quality of life after treatment in a residential sub-acute mental health service in Australia.

PubMed

Thomas, Kerry A; Rickwood, Debra J; Brown, Patricia M

2017-01-01

The aim of this study was to assess clients' and service providers' perspectives on changes in mental health after an admission to a residential recovery-focused, sub-acute service, in Australia. Clients were either step-up clients, entering the service directly from the community, or step-down clients who were transitioning from an inpatient unit to home. During the 30-month period of data collection (August 2011 to January 2014) all clients (N = 102) were invited to participate in the longitudinal study and 41 clients consented to be involved (38% response rate). At admission and exit, participants completed the Behaviour and Symptom Identification Scale (Basis-32) and service providers completed the Life Skills Profile-16 and Health of the Nations Outcome Scales. Follow-up data 3 months after exit were available for 12 clients, including the Basis-32 and a self-report measure of quality of life (Assessment of Quality of Life 8-dimension). Both client groups reported positive improvements between admission and exit in the areas of relation to self and others, psychosis, daily living and presence of depression or anxiety symptoms. Service providers reported gains for clients in the areas of self-care, level of symptoms and presence of social problems. At 3 months, clients generally reported positive quality of life, although there was no significant change in symptoms and functioning. This study demonstrates that after an admission to a sub-acute service, step-up clients experience an improvement in their symptoms and functioning, have avoided a hospital admission and are well enough to return home. Step-down clients also experience further improvements in their symptoms and functioning, indicating that the service has assisted them in their transition to independent living after a hospital admission. Sub-acute residential units provide a continuation of care for inpatients preparing to return home, and people with a mental health problem living in the community who experience an escalation in symptoms and prefer an alternative to hospital. © 2015 John Wiley & Sons Ltd.

Optimising the Inflammatory Bowel Disease Unit to Improve Quality of Care: Expert Recommendations.

PubMed

Louis, Edouard; Dotan, Iris; Ghosh, Subrata; Mlynarsky, Liat; Reenaers, Catherine; Schreiber, Stefan

2015-08-01

The best care setting for patients with inflammatory bowel disease [IBD] may be in a dedicated unit. Whereas not all gastroenterology units have the same resources to develop dedicated IBD facilities and services, there are steps that can be taken by any unit to optimise patients' access to interdisciplinary expert care. A series of pragmatic recommendations relating to IBD unit optimisation have been developed through discussion among a large panel of international experts. Suggested recommendations were extracted through systematic search of published evidence and structured requests for expert opinion. Physicians [n = 238] identified as IBD specialists by publications or clinical focus on IBD were invited for discussion and recommendation modification [Barcelona, Spain; 2014]. Final recommendations were voted on by the group. Participants also completed an online survey to evaluate their own experience related to IBD units. A total of 60% of attendees completed the survey, with 15% self-classifying their centre as a dedicated IBD unit. Only half of respondents indicated that they had a defined IBD treatment algorithm in place. Key recommendations included the need to develop a multidisciplinary team covering specifically-defined specialist expertise in IBD, to instil processes that facilitate cross-functional communication and to invest in shared care models of IBD management. Optimising the setup of IBD units will require progressive leadership and willingness to challenge the status quo in order to provide better quality of care for our patients. IBD units are an important step towards harmonising care for IBD across Europe and for establishing standards for disease management programmes. © European Crohn’s and Colitis Organisation 2015.

Optimising the Inflammatory Bowel Disease Unit to Improve Quality of Care: Expert Recommendations

PubMed Central

Dotan, Iris; Ghosh, Subrata; Mlynarsky, Liat; Reenaers, Catherine; Schreiber, Stefan

2015-01-01

Introduction: The best care setting for patients with inflammatory bowel disease [IBD] may be in a dedicated unit. Whereas not all gastroenterology units have the same resources to develop dedicated IBD facilities and services, there are steps that can be taken by any unit to optimise patients’ access to interdisciplinary expert care. A series of pragmatic recommendations relating to IBD unit optimisation have been developed through discussion among a large panel of international experts. Methods: Suggested recommendations were extracted through systematic search of published evidence and structured requests for expert opinion. Physicians [n = 238] identified as IBD specialists by publications or clinical focus on IBD were invited for discussion and recommendation modification [Barcelona, Spain; 2014]. Final recommendations were voted on by the group. Participants also completed an online survey to evaluate their own experience related to IBD units. Results: A total of 60% of attendees completed the survey, with 15% self-classifying their centre as a dedicated IBD unit. Only half of respondents indicated that they had a defined IBD treatment algorithm in place. Key recommendations included the need to develop a multidisciplinary team covering specifically-defined specialist expertise in IBD, to instil processes that facilitate cross-functional communication and to invest in shared care models of IBD management. Conclusions: Optimising the setup of IBD units will require progressive leadership and willingness to challenge the status quo in order to provide better quality of care for our patients. IBD units are an important step towards harmonising care for IBD across Europe and for establishing standards for disease management programmes. PMID:25987349

Improving patient care by making small sustainable changes: a cardiac telemetry unit's experience.

PubMed

Braaten, Jane S; Bellhouse, Dorothy E

2007-01-01

With the introduction of each new drug, technology, and regulation, the processes of care become more complicated, creating an elaborate set of procedures connecting various hospital units and departments. Using methods of Adaptive Design and the Toyota Production System, a nursing unit redesigned work systems to achieve sustainable improvements in productivity, staff and patient satisfaction, and quality outcomes. The first hurdle of redesign was identifying problems, to which staff had become so accustomed with various work arounds that they had trouble seeing the process bottlenecks. Once the staff identified problems, they assumed they could solve the problem because they assumed they knew the causes. Utilizing root cause analysis, asking, "why, why, why," was essential to unearthing the true cause of a problem. Similarly, identifying solutions that were simple and low cost was an essential step in problem solving. Adopting new procedures and sustaining the commitment to identify and signal problems was a last and critical step toward realizing improvement, requiring a manager to function as "teacher/coach" rather than "fixer/firefighter".

Pore surface engineering in covalent organic frameworks.

PubMed

Nagai, Atsushi; Guo, Zhaoqi; Feng, Xiao; Jin, Shangbin; Chen, Xiong; Ding, Xuesong; Jiang, Donglin

2011-11-15

Covalent organic frameworks (COFs) are a class of important porous materials that allow atomically precise integration of building blocks to achieve pre-designable pore size and geometry; however, pore surface engineering in COFs remains challenging. Here we introduce pore surface engineering to COF chemistry, which allows the controlled functionalization of COF pore walls with organic groups. This functionalization is made possible by the use of azide-appended building blocks for the synthesis of COFs with walls to which a designable content of azide units is anchored. The azide units can then undergo a quantitative click reaction with alkynes to produce pore surfaces with desired groups and preferred densities. The diversity of click reactions performed shows that the protocol is compatible with the development of various specific surfaces in COFs. Therefore, this methodology constitutes a step in the pore surface engineering of COFs to realize pre-designed compositions, components and functions.

Hierarchical functional organization of formal biological systems: a dynamical approach. II. The concept of non-symmetry leads to a criterion of evolution deduced from an optimum principle of the (O-FBS) sub-system.

PubMed

Chauvet, G A

1993-03-29

In paper I a theory of functional organization in terms of functional interactions was proposed for a formal biological system (FBS). A functional interaction was defined as the product emitted by a structural unit, i.e. an assembly of molecules, cells, tissues or organs, which acts on another. We have shown that a self-association hypothesis could be an explanation for the source of these functional interactions because it is consistent with increased stability of the system after association. The construction of the set of interactions provides the topology of the biological system, called (O-FBS), in contrast to the (D-FBS) which describes the dynamics of the processes associated with the functional interactions. In this paper, an optimum principle is established, due to the non-symmetry of functional interactions, which could explain the stability of an FBS, and a criterion of evolution for the hierarchical topological organization of a FBS during development is deduced from that principle. The combinatorics of the (O-FBS) leads to the topological stability of the related graph. It is shown that this problem can be expressed as the re-distribution of sources and sinks, when one of them is suppressed, given the constraint of the invariance of the physiological function. Such an optimum principle could be called a 'principle of increase in functional order by hierarchy'. The first step is the formulation of a 'potential' for the functional organization, which describes the ability of the system to combine functional interactions, such that the principle of vital coherence (paper I) is satisfied. This function measures the number of potential functional interactions. The second step is to discover the maximum of this function. Biological systems in such a state of maximum organization are shown to satisfy particular dynamics, which can be experimentally verified: either the number of sinks decreases, or this number increases, in a monotonic way. The class of systems considered here is assumed to satisfy such an extremum hypothesis. The third step is a study of the variation of the degree of organization (paper I), i.e. the number of structural units when the biological system is growing. We establish an optimum principle for a new function called 'orgatropy'. By adding a criterion of specialization to the system we show the emergence of a level of organization with a re-organization of the system.(ABSTRACT TRUNCATED AT 400 WORDS)

Observational study of treatment space in individual neonatal cot spaces.

PubMed

Hignett, Sue; Lu, Jun; Fray, Mike

2010-01-01

Technology developments in neonatal intensive care units have increased the spatial requirements for clinical activities. Because the effectiveness of healthcare delivery is determined in part by the design of the physical environment and the spatial organization of work, it is appropriate to apply an evidence-based approach to architectural design. This study aimed to provide empirical evidence of the spatial requirements for an individual cot or incubator space. Observational data from 2 simulation exercises were combined with an expert review to produce a final recommendation. A validated 5-step protocol was used to collect data. Step 1 defined the clinical specialty and space. In step 2, data were collected with 28 staff members and 15 neonates to produce a simulation scenario representing the frequent and safety-critical activities. In step 3, 21 staff members participated in functional space experiments to determine the average spatial requirements. Step 4 incorporated additional data (eg, storage and circulation) to produce a spatial recommendation. Finally, the recommendation was reviewed in step 5 by a national expert clinical panel to consider alternative layouts and technology. The average space requirement for an individual neonatal intensive care unit cot (incubator) space was 13.5 m2 (or 145.3 ft2). The circulation and storage space requirements added in step 4 increased this to 18.46 m2 (or 198.7 ft2). The expert panel reviewed the recommendation and agreed that the average individual cot space (13.5 m2/[or 145.3 ft2]) would accommodate variance in working practices. Care needs to be taken when extrapolating this recommendation to multiple cot areas to maintain the minimum spatial requirement.

Senior Resident Training on Educational Principles (STEP): A Proposed Innovative Step from a Developing Nation.

PubMed

Singh, Satendra

2010-12-01

Resident-as-teacher courses are pretty common in Western medical schools however they are a rarity in Asian and developing countries. The current report is a scholarly analysis of a three day orientation program for senior residents in order to improve their functioning by providing new template either for supplementing basic workshops for faculty or to advocate a change in system. The experience gained by Medical Education Unit of University College of Medical Sciences can be used to conduct training breeding grounds at national or regional levels. Resident as teachers educational interventions need to be designed taking into account their impact on education system.

Combinatorial life cycle assessment to inform process design of industrial production of algal biodiesel.

PubMed

Brentner, Laura B; Eckelman, Matthew J; Zimmerman, Julie B

2011-08-15

The use of algae as a feedstock for biodiesel production is a rapidly growing industry, in the United States and globally. A life cycle assessment (LCA) is presented that compares various methods, either proposed or under development, for algal biodiesel to inform the most promising pathways for sustainable full-scale production. For this analysis, the system is divided into five distinct process steps: (1) microalgae cultivation, (2) harvesting and/or dewatering, (3) lipid extraction, (4) conversion (transesterification) into biodiesel, and (5) byproduct management. A number of technology options are considered for each process step and various technology combinations are assessed for their life cycle environmental impacts. The optimal option for each process step is selected yielding a best case scenario, comprised of a flat panel enclosed photobioreactor and direct transesterification of algal cells with supercritical methanol. For a functional unit of 10 GJ biodiesel, the best case production system yields a cumulative energy demand savings of more than 65 GJ, reduces water consumption by 585 m(3) and decreases greenhouse gas emissions by 86% compared to a base case scenario typical of early industrial practices, highlighting the importance of technological innovation in algae processing and providing guidance on promising production pathways.

Riparian buffer design guidelines for water quality and wildlife habitat functions on agricultural landscapes in the Intermountain West: Appendix C

Treesearch

Susan Buffler

2008-01-01

Currently, there is no scientific literature examining appropriate riparian buffer widths for water quality for streams on private agriculturally dominated lands in arid regions of the Intermountain West. The initial step in this research effort was a review of buffer research as documented in the literature in other physiographic regions of the United States. Research...

Exploiting Multi-Step Sample Trajectories for Approximate Value Iteration

DTIC Science & Technology

2013-09-01

WORK UNIT NUMBER IH 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) AFRL/ RISC 525 Brooks Road, Rome NY 13441-4505 Binghamton University...S) AND ADDRESS(ES) Air Force Research Laboratory/Information Directorate Rome Research Site/ RISC 525 Brooks Road Rome NY 13441-4505 10. SPONSOR...iteration methods for reinforcement learning (RL) generalize experience from limited samples across large state-action spaces. The function approximators

Navigating in a Sea of Ideas: Teacher and Students Negotiate a Course Toward Mutual Relevance.

ERIC Educational Resources Information Center

Flick, Lawrence B.

The distinction between the participant and spectator functions of language are used to describe the teaching skills of a fourth grade teacher during a unit of instruction. This study documented the science instruction of a teacher who 20 years ago majored in teaching reading. In recent years she has taken steps to develop skill and knowledge in…

Genome-wide Analysis Reveals Extensive Functional Interaction between DNA Replication Initiation and Transcription in the Genome of Trypanosoma brucei

PubMed Central

Tiengwe, Calvin; Marcello, Lucio; Farr, Helen; Dickens, Nicholas; Kelly, Steven; Swiderski, Michal; Vaughan, Diane; Gull, Keith; Barry, J. David; Bell, Stephen D.; McCulloch, Richard

2012-01-01

Summary Identification of replication initiation sites, termed origins, is a crucial step in understanding genome transmission in any organism. Transcription of the Trypanosoma brucei genome is highly unusual, with each chromosome comprising a few discrete transcription units. To understand how DNA replication occurs in the context of such organization, we have performed genome-wide mapping of the binding sites of the replication initiator ORC1/CDC6 and have identified replication origins, revealing that both localize to the boundaries of the transcription units. A remarkably small number of active origins is seen, whose spacing is greater than in any other eukaryote. We show that replication and transcription in T. brucei have a profound functional overlap, as reducing ORC1/CDC6 levels leads to genome-wide increases in mRNA levels arising from the boundaries of the transcription units. In addition, ORC1/CDC6 loss causes derepression of silent Variant Surface Glycoprotein genes, which are critical for host immune evasion. PMID:22840408

48 CFR 3036.104-90 - Authority for one-step turn-key design-build contracting for the United States Coast Guard (USCG).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Authority for one-step... General 3036.104-90 Authority for one-step turn-key design-build contracting for the United States Coast Guard (USCG). The Head of the Contracting Activity (HCA) of the U.S. Coast Guard may use one-step turn...

The eClinical Care Pathway Framework: a novel structure for creation of online complex clinical care pathways and its application in the management of sexually transmitted infections.

PubMed

Gibbs, Jo; Sutcliffe, Lorna J; Gkatzidou, Voula; Hone, Kate; Ashcroft, Richard E; Harding-Esch, Emma M; Lowndes, Catherine M; Sadiq, S Tariq; Sonnenberg, Pam; Estcourt, Claudia S

2016-07-22

Despite considerable international eHealth impetus, there is no guidance on the development of online clinical care pathways. Advances in diagnostics now enable self-testing with home diagnosis, to which comprehensive online clinical care could be linked, facilitating completely self-directed, remote care. We describe a new framework for developing complex online clinical care pathways and its application to clinical management of people with genital chlamydia infection, the commonest sexually transmitted infection (STI) in England. Using the existing evidence-base, guidelines and examples from contemporary clinical practice, we developed the eClinical Care Pathway Framework, a nine-step iterative process. Step 1: define the aims of the online pathway; Step 2: define the functional units; Step 3: draft the clinical consultation; Step 4: expert review; Step 5: cognitive testing; Step 6: user-centred interface testing; Step 7: specification development; Step 8: software testing, usability testing and further comprehension testing; Step 9: piloting. We then applied the Framework to create a chlamydia online clinical care pathway (Online Chlamydia Pathway). Use of the Framework elucidated content and structure of the care pathway and identified the need for significant changes in sequences of care (Traditional: history, diagnosis, information versus Online: diagnosis, information, history) and prescribing safety assessment. The Framework met the needs of complex STI management and enabled development of a multi-faceted, fully-automated consultation. The Framework provides a comprehensive structure on which complex online care pathways such as those needed for STI management, which involve clinical services, public health surveillance functions and third party (sexual partner) management, can be developed to meet national clinical and public health standards. The Online Chlamydia Pathway's standardised method of collecting data on demographics and sexual behaviour, with potential for interoperability with surveillance systems, could be a powerful tool for public health and clinical management.

Development of an mHealth Intervention (iSTEP) to Promote Physical Activity among People Living with HIV.

PubMed

Montoya, Jessica L; Wing, David; Knight, Adam; Moore, David J; Henry, Brook L

2015-01-01

A randomized controlled trial is being conducted in the United States to test the efficacy of a personalized interactive mobile health intervention (iSTEP) designed to increase physical activity (PA) and improve neurocognitive functioning among HIV-positive persons. This article describes an initial qualitative study performed to develop iSTEP for the HIV-positive population, including assessment of PA barriers and facilitators. Two focus groups, with 9 and 12 unique HIV-positive individuals, respectively, were administered to evaluate barriers limiting PA and potential iSTEP content created to encourage greater PA. Group discussions revealed prominent PA barriers, including HIV symptoms (neuropathy, lipoatrophy), antiretroviral medication effects, and fatigue; significant PA facilitators included self-monitoring and family support. Participants provided feedback on strategies to increase PA and expressed positive support for a mobile intervention adapted to personal priorities. These findings will assist the development of novel PA interventions focused on treating the epidemic of HIV-associated neurocognitive disorders. © The Author(s) 2015.

Brazilian version of the Functional Status Score for the ICU: translation and cross-cultural adaptation

PubMed Central

da Silva, Vinicius Zacarias Maldaner; de Araújo Neto, Jose Aires; Cipriano Jr., Gerson; Pinedo, Mariela; Needham, Dale M.; Zanni, Jennifer M.; Guimarães, Fernando Silva

2017-01-01

Objective The aim of the present study was to translate and cross-culturally adapt the Functional Status Score for the intensive care unit (FSS-ICU) into Brazilian Portuguese. Methods This study consisted of the following steps: translation (performed by two independent translators), synthesis of the initial translation, back-translation (by two independent translators who were unaware of the original FSS-ICU), and testing to evaluate the target audience's understanding. An Expert Committee supervised all steps and was responsible for the modifications made throughout the process and the final translated version. Results The testing phase included two experienced physiotherapists who assessed a total of 30 critical care patients (mean FSS-ICU score = 25 ± 6). As the physiotherapists did not report any uncertainties or problems with interpretation affecting their performance, no additional adjustments were made to the Brazilian Portuguese version after the testing phase. Good interobserver reliability between the two assessors was obtained for each of the 5 FSS-ICU tasks and for the total FSS-ICU score (intraclass correlation coefficients ranged from 0.88 to 0.91). Conclusion The adapted version of the FSS-ICU in Brazilian Portuguese was easy to understand and apply in an intensive care unit environment. PMID:28444070

Plan Your Marketing: Enhance Profits and Reduce Risk.

ERIC Educational Resources Information Center

Edwards, William; And Others

This marketing unit was developed to help farm families formulate a step-by-step plan for marketing their commodities in order to help remove much of the guesswork and anxiety from the process. The unit is organized in the following eight sections: introduction; sources of risk; pricing alternatives; developing a plan (10 steps); summary;…

Influence of curriculum type on student performance in the United States Medical Licensing Examination Step 1 and Step 2 exams: problem-based learning vs. lecture-based curriculum.

PubMed

Enarson, C; Cariaga-Lo, L

2001-11-01

The results of the United States Medical Licensing Examination Step 1 and 2 examinations are reported for students enrolled in a problem-based and traditional lecture-based curricula over a seven-year period at a single institution. There were no statistically significant differences in mean scores on either examination over the seven year period as a whole. There were statistically significant main effects noted by cohort year and curricular track for both the Step 1 and 2 examinations. These results support the general, long-term effectiveness of problem-based learning with respect to basic and clinical science knowledge acquisition. This paper reports the United States Medical Licensing Examination Step 1 and Step 2 results for students enrolled in a problem-based and traditional lecture-based learning curricula over the seven-year period (1992-98) in order to evaluate the adequacy of each curriculum in supporting students learning of the basic and clinical sciences. Six hundred and eighty-nine students who took the United States Medical Licensing Examination Step 1 and 540 students who took Step 2 for the first time over the seven-year period were included in the analyses. T-test analyses were utilized to compare students' Step 1 and Step 2 performance by curriculum groups. United States Medical Licensing Examination Step 1 scores over the seven-year period were 214 for Traditional Curriculum students and 208 for Parallel Curriculum students (t-value = 1.32, P=0.21). Mean Step 2 scores over the seven-year period were 208 for Traditional Curriculum students and 206 for Parallel Curriculum students (t-value=1.08, P=0.30). Statistically significant main effects were noted by cohort year and curricular track for both the Step 1 and Step 2 examinations. The totality of experience in both groups, although differing by curricular type, may be similar enough that the comparable scores are what should be expected. These results should be reassuring to curricular planners and faculty that problem-based learning can provide students with the knowledge needed for the subsequent phases of their medical education.

Development of a transient, lumped hydrologic model for geomorphologic units in a geomorphology based rainfall-runoff modelling framework

NASA Astrophysics Data System (ADS)

Vannametee, E.; Karssenberg, D.; Hendriks, M. R.; de Jong, S. M.; Bierkens, M. F. P.

2010-05-01

We propose a modelling framework for distributed hydrological modelling of 103-105 km2 catchments by discretizing the catchment in geomorphologic units. Each of these units is modelled using a lumped model representative for the processes in the unit. Here, we focus on the development and parameterization of this lumped model as a component of our framework. The development of the lumped model requires rainfall-runoff data for an extensive set of geomorphological units. Because such large observational data sets do not exist, we create artificial data. With a high-resolution, physically-based, rainfall-runoff model, we create artificial rainfall events and resulting hydrographs for an extensive set of different geomorphological units. This data set is used to identify the lumped model of geomorphologic units. The advantage of this approach is that it results in a lumped model with a physical basis, with representative parameters that can be derived from point-scale measurable physical parameters. The approach starts with the development of the high-resolution rainfall-runoff model that generates an artificial discharge dataset from rainfall inputs as a surrogate of a real-world dataset. The model is run for approximately 105 scenarios that describe different characteristics of rainfall, properties of the geomorphologic units (i.e. slope gradient, unit length and regolith properties), antecedent moisture conditions and flow patterns. For each scenario-run, the results of the high-resolution model (i.e. runoff and state variables) at selected simulation time steps are stored in a database. The second step is to develop the lumped model of a geomorphological unit. This forward model consists of a set of simple equations that calculate Hortonian runoff and state variables of the geomorphologic unit over time. The lumped model contains only three parameters: a ponding factor, a linear reservoir parameter, and a lag time. The model is capable of giving an appropriate representation of the transient rainfall-runoff relations that exist in the artificial data set generated with the high-resolution model. The third step is to find the values of empirical parameters in the lumped forward model using the artificial dataset. For each scenario of the high-resolution model run, a set of lumped model parameters is determined with a fitting method using the corresponding time series of state variables and outputs retrieved from the database. Thus, the parameters in the lumped model can be estimated by using the artificial data set. The fourth step is to develop an approach to assign lumped model parameters based upon the properties of the geomorphological unit. This is done by finding relationships between the measurable physical properties of geomorphologic units (i.e. slope gradient, unit length, and regolith properties) and the lumped forward model parameters using multiple regression techniques. In this way, a set of lumped forward model parameters can be estimated as a function of morphology and physical properties of the geomorphologic units. The lumped forward model can then be applied to different geomorphologic units. Finally, the performance of the lumped forward model is evaluated; the outputs of the lumped forward model are compared with the results of the high-resolution model. Our results show that the lumped forward model gives the best estimates of total discharge volumes and peak discharges when rain intensities are not significantly larger than the infiltration capacities of the units and when the units are small with a flat gradient. Hydrograph shapes are fairly well reproduced for most cases except for flat and elongated units with large runoff volumes. The results of this study provide a first step towards developing low-dimensional models for large ungauged basins.

Measure Guideline. Five Steps to Implement the Public Housing Authority Energy-Efficient Unit Turnover Checklist

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liaukus, Christine

2015-07-09

Five Steps to Implementing the PHA Energy Efficient Unit Turnover Package (ARIES, 2014) is a guide to prepare for the installation of energy efficient measures during a typical public housing authority unit turnover. While a PHA is cleaning, painting and readying a unit for a new resident, there is an opportunity to incorporate energy efficiency measures to further improve the unit's performance. The measures on the list are simple enough to be implemented by in-house maintenance personnel, inexpensive enough to be folded into operating expenses without needing capital budget, and fast enough to implement without substantially changing the number ofmore » days between occupancies, a critical factor for organizations where the demand for dwelling units far outweighs the supply. The following guide lays out a five step plan to implement the EE Unit Turnover Package in your PHA, from an initial Self-Assessment through to Package Implementation.« less

Neural networks for vertical microcode compaction

NASA Astrophysics Data System (ADS)

Chu, Pong P.

1992-09-01

Neural networks provide an alternative way to solve complex optimization problems. Instead of performing a program of instructions sequentially as in a traditional computer, neural network model explores many competing hypotheses simultaneously using its massively parallel net. The paper shows how to use the neural network approach to perform vertical micro-code compaction for a micro-programmed control unit. The compaction procedure includes two basic steps. The first step determines the compatibility classes and the second step selects a minimal subset to cover the control signals. Since the selection process is an NP- complete problem, to find an optimal solution is impractical. In this study, we employ a customized neural network to obtain the minimal subset. We first formalize this problem, and then define an `energy function' and map it to a two-layer fully connected neural network. The modified network has two types of neurons and can always obtain a valid solution.

Signal conditioning units for vibration measurement in HUMS

NASA Astrophysics Data System (ADS)

Wu, Kaizhi; Liu, Tingting; Yu, Zirong; Chen, Lijuan; Huang, Xinjie

2018-03-01

A signal conditioning units for vibration measurement in HUMS is proposed in the paper. Due to the frequency of vibrations caused by components in helicopter are different, two steps amplifier and programmable anti-aliasing filter are designed to meet the measurement of different types of helicopter. Vibration signals are converted into measurable electrical signals combing with ICP driver firstly. Then pre-amplifier and programmable gain amplifier is applied to magnify the weak electrical signals. In addition, programmable anti-aliasing filter is utilized to filter the interference of noise. The units were tested using function signal generator and oscilloscope. The experimental results have demonstrated the effectiveness of our proposed method in quantitatively and qualitatively. The method presented in this paper can meet the measurement requirement for different types of helicopter.

A combined optical, SEM and STM study of growth spirals on the polytypic cadmium iodide crystals

NASA Astrophysics Data System (ADS)

Singh, Rajendra; Samanta, S. B.; Narlikar, A. V.; Trigunayat, G. C.

2000-05-01

Some novel results of a combined sequential study of growth spirals on the basal surface of the richly polytypic CdI 2 crystals by optical microscopy, scanning electron microscopy (SEM) and scanning tunneling microscopy (STM) are presented and discussed. Under the high resolution and magnification achieved in the scanning electron microscope, the growth steps of large heights seen in the optical micrographs are found to have a large number of additional steps of smaller heights existing between any two adjacent large height growth steps. When further seen by a scanning tunneling microscope, which provides still higher resolution, sequences of unit substeps, each of height equal to the unit cell height of the underlying polytype, are revealed to exist on the surface. Several large steps also lie between the unit steps, with heights equal to an integral multiple of either the unit cell height of the underlying polytype or the thickness of a molecular sheet I-Cd-I. It is suggested that initially a giant screw dislocation may form by brittle fracture of the crystal platelet, which may gradually decompose into numerous unit dislocations during subsequent crystal growth.

Evaluating physical function and activity in the elderly patient using wearable motion sensors.

PubMed

Grimm, Bernd; Bolink, Stijn

2016-05-01

Wearable sensors, in particular inertial measurement units (IMUs) allow the objective, valid, discriminative and responsive assessment of physical function during functional tests such as gait, stair climbing or sit-to-stand.Applied to various body segments, precise capture of time-to-task achievement, spatiotemporal gait and kinematic parameters of demanding tests or specific to an affected limb are the most used measures.In activity monitoring (AM), accelerometry has mainly been used to derive energy expenditure or general health related parameters such as total step counts.In orthopaedics and the elderly, counting specific events such as stairs or high intensity activities were clinimetrically most powerful; as were qualitative parameters at the 'micro-level' of activity such as step frequency or sit-stand duration.Low cost and ease of use allow routine clinical application but with many options for sensors, algorithms, test and parameter definitions, choice and comparability remain difficult, calling for consensus or standardisation. Cite this article: Grimm B, Bolink S. Evaluating physical function and activity in the elderly patient using wearable motion sensors. EFORT Open Rev 2016;1:112-120. DOI: 10.1302/2058-5241.1.160022.

Evaluating physical function and activity in the elderly patient using wearable motion sensors

PubMed Central

Grimm, Bernd; Bolink, Stijn

2016-01-01

Wearable sensors, in particular inertial measurement units (IMUs) allow the objective, valid, discriminative and responsive assessment of physical function during functional tests such as gait, stair climbing or sit-to-stand. Applied to various body segments, precise capture of time-to-task achievement, spatiotemporal gait and kinematic parameters of demanding tests or specific to an affected limb are the most used measures. In activity monitoring (AM), accelerometry has mainly been used to derive energy expenditure or general health related parameters such as total step counts. In orthopaedics and the elderly, counting specific events such as stairs or high intensity activities were clinimetrically most powerful; as were qualitative parameters at the ‘micro-level’ of activity such as step frequency or sit-stand duration. Low cost and ease of use allow routine clinical application but with many options for sensors, algorithms, test and parameter definitions, choice and comparability remain difficult, calling for consensus or standardisation. Cite this article: Grimm B, Bolink S. Evaluating physical function and activity in the elderly patient using wearable motion sensors. EFORT Open Rev 2016;1:112–120. DOI: 10.1302/2058-5241.1.160022. PMID:28461937

To amend title 10, United States Code, to authorize the Secretary of Defense to make grants to recognized science and technology secondary schools to support research and development projects at such schools in science, mathematics, engineering, and technology to supplement the national security functions of the Department of Defense.

THOMAS, 111th Congress

Rep. Connolly, Gerald E. [D-VA-11

2009-07-24

House - 01/12/2010 Referred to the Subcommittee on Terrorism, Unconventional Threats and Capabilities. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Coping with Academic Stressors: A Pilot Study

DTIC Science & Technology

1976-12-20

Sarason anid James H./Johnso K! N,0𔃺’ -75-90 V 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT, TASK AREA A WORK UNIT...coping skills in the personnel of functioning organizations , it seemed desirable to approach this task in a stepwise fashion. An impoDrtant first step...research in a complex organization such as a police department. (Research with a police department is currently underway.) Because it was felt

From random microstructures to representative volume elements

NASA Astrophysics Data System (ADS)

Zeman, J.; Šejnoha, M.

2007-06-01

A unified treatment of random microstructures proposed in this contribution opens the way to efficient solutions of large-scale real world problems. The paper introduces a notion of statistically equivalent periodic unit cell (SEPUC) that replaces in a computational step the actual complex geometries on an arbitrary scale. A SEPUC is constructed such that its morphology conforms with images of real microstructures. Here, the appreciated two-point probability function and the lineal path function are employed to classify, from the statistical point of view, the geometrical arrangement of various material systems. Examples of statistically equivalent unit cells constructed for a unidirectional fibre tow, a plain weave textile composite and an irregular-coursed masonry wall are given. A specific result promoting the applicability of the SEPUC as a tool for the derivation of homogenized effective properties that are subsequently used in an independent macroscopic analysis is also presented.

Positive Transitions for Student Athletes: Life Skills for Transitions in Sport, College & Career.

ERIC Educational Resources Information Center

Meeker, Darin J.; Stankovich, Christopher E.; Kays, Todd M.

This book provides concrete information and step-by-step exercises to help student athletes succeed in college and make a successful transition to the world beyond college. The book is divided into 14 units containing some or all the following elements: goals; reading materials accompanying review questions; exercises; a unit recap; unit review…

Genetic Studies of the Prp17 Gene of Saccharomyces Cerevisiae: A Domain Essential for Function Maps to a Nonconserved Region of the Protein

PubMed Central

Seshadri, V.; Vaidya, V. C.; Vijayraghavan, U.

1996-01-01

The PRP17 gene product is required for the second step of pre-mRNA splicing reactions. The C-terminal half of this protein bears four repeat units with homology to the β transducin repeat. Missense mutations in three temperature-sensitive prp17 mutants map to a region in the N-terminal half of the protein. We have generated, in vitro, 11 missense alleles at the β transducin repeat units and find that only one affects function in vivo. A phenotypically silent missense allele at the fourth repeat unit enhances the slow-growing phenotype conferred by an allele at the third repeat, suggesting an interaction between these domains. Although many missense mutations in highly conserved amino acids lack phenotypic effects, deletion analysis suggests an essential role for these units. Only mutations in the N-terminal nonconserved domain of PRP17 are synthetically lethal in combination with mutations in PRP16 and PRP18, two other gene products required for the second splicing reaction. A mutually allele-specific interaction between prp17 and snr7, with mutations in U5 snRNA, was observed. We therefore suggest that the functional region of Prp17p that interacts with Prp18p, Prp16p, and U5 snRNA is in the N terminal region of the protein. PMID:8722761

Cost and unit cost calculations using step-down accounting.

PubMed

Conteh, Lesong; Walker, Damian

2004-03-01

There is paucity of unit cost data from low- and middle-income countries, although recent initiatives have emerged to help rectify this. The limited budgets assigned to health care facilities mean that health planners and managers must be able to account for the resources used in health facilities as well as use them efficiently. Step-down cost accounting (SDCA) offers a relatively simple method for generating cost and unit cost data at the facility level. However, to the best of our knowledge, there is a lack of clear and concise guidance on how to undertake SDCA. Therefore, this paper, using a worked example, illustrates the different steps involved to generate cost and unit costs for a small hospital.

Rehabilitation of patients admitted to a respiratory intensive care unit.

PubMed

Nava, S

1998-07-01

Pulmonary rehabilitation has been shown to be of benefit to clinically stable patients with chronic obstructive pulmonary disease (COPD). This study examined the effect of pulmonary rehabilitation on some physiologic variables in COPD patients recovering from an episode of acute respiratory failure. A prospective, randomized study. A respiratory intensive care unit (RICU). Eighty COPD patients recovering from an episode of acute respiratory failure were randomized in a 3:1 fashion to receive stepwise pulmonary rehabilitation (group A, n=60 patients) or standard medical therapy (group B, n=20 patients). Improvements in exercise tolerance, sense of breathlessness, respiratory muscle function, and pulmonary function test values were measured, respectively, by exercise capacity (6-minute walking distance [6MWD]), dyspnea score (Visual Analog Scale [VAS]), maximal inspiratory pressure (MIP), forced expiratory volume in 1 second (FEV1), and forced vital capacity (FVC). Group A received pulmonary rehabilitation that consisted of passive mobilization (step I), early deambulation (step II), respiratory and lower skeletal muscle training (step III), and if the patients were able, complete lower extremity training on a treadmill (step IV). Group B received standard medical therapy plus a basic deambulation program. Sixty-one of 80 patients were mechanically ventilated at admission to the unit and most of them were bedridden. Twelve of the 60 group A patients and 4 of the 20 group B patients died during their RICU stay, and 9 patients required invasive mechanical ventilation at home after their discharge. The total length of RICU stay was 38+/-14 days for patients in group A versus 33.2+/-11 days for those in group B. Most patients from both groups regained the ability to walk, either unaided or aided. At discharge, 6 MWD results were significantly improved (p < .001) in Group A only. MIP improved in Group A only (p < .05), while VAS scores improved in both groups, but the improvement was more marked in group A (p < .001) than in group B (p < .05). COPD patients who were admitted to a RICU in critical condition after an episode of acute respiratory failure and who, in most cases, required mechanical ventilation benefited from comprehensive early pulmonary rehabilitation, compared with patients who received standard medical therapy and progressive ambulation.

Methodological approach in determination of small spatial units in a highly complex terrain in atmospheric pollution research: the case of Zasavje region in Slovenia.

PubMed

Kukec, Andreja; Boznar, Marija Z; Mlakar, Primoz; Grasic, Bostjan; Herakovic, Andrej; Zadnik, Vesna; Zaletel-Kragelj, Lijana; Farkas, Jerneja; Erzen, Ivan

2014-05-01

The study of atmospheric air pollution research in complex terrains is challenged by the lack of appropriate methodology supporting the analysis of the spatial relationship between phenomena affected by a multitude of factors. The key is optimal design of a meaningful approach based on small spatial units of observation. The Zasavje region, Slovenia, was chosen as study area with the main objective to investigate in practice the role of such units in a test environment. The process consisted of three steps: modelling of pollution in the atmosphere with dispersion models, transfer of the results to geographical information system software, and then moving on to final determination of the function of small spatial units. A methodology capable of designing useful units for atmospheric air pollution research in highly complex terrains was created, and the results were deemed useful in offering starting points for further research in the field of geospatial health.

Educational Attainment and Adult Mortality in the United States: A Systematic Analysis of Functional Form*

PubMed Central

Montez, Jennifer Karas; Hummer, Robert A.; Hayward, Mark D.

2012-01-01

A vast literature has documented the inverse association between educational attainment and U.S. adult mortality risk, but given little attention to identifying the optimal functional form of the association. A theoretical explanation of the association hinges on our ability to empirically describe it. Using the 1979–1998 National Longitudinal Mortality Study for non-Hispanic white and black adults aged 25–100 years during the mortality follow-up period (N=1,008,215), we evaluated 13 functional forms across race-gender-age subgroups to determine which form(s) best captured the association. Results revealed that a functional form that includes a linear decline in mortality risk from 0–11 years of education, followed by a step-change reduction in mortality risk upon attainment of a high school diploma, at which point mortality risk resumes a linear decline but with a steeper slope than that prior to a high school diploma was generally preferred. The findings provide important clues for theoretical development of explanatory mechanisms: an explanation for the selected functional form may require integrating a credentialist perspective to explain the step-change reduction in mortality risk upon attainment of a high school diploma, with a human capital perspective to explain the linear declines before and after a high school diploma. PMID:22246797

Step-grandparenthood in the United States.

PubMed

Yahirun, Jenjira J; Park, Sung S; Seltzer, Judith A

2018-01-18

This study provides new information about the demography of step-grandparenthood in the United States. Specifically, we examine the prevalence of step-grandparenthood across birth cohorts and for socioeconomic and racial/ethnic groups. We also examine lifetime exposure to the step-grandparent role. Using data from the Panel Study of Income Dynamics and the Health and Retirement Study, we use percentages to provide first estimates of step-grandparenthood and to describe demographic and socioeconomic variation in who is a step-grandparent. We use life tables to estimate the exposure to step-grandparenthood. The share of step-grandparents is increasing across birth cohorts. However, individuals without a college education and non-Whites are more likely to become step-grandparents. Exposure to the step-grandparent role accounts for approximately 15% of total grandparent years at age 65 for women and men. A growing body of research finds that grandparents are increasingly instrumental in the lives of younger generations. However, the majority of this work assumes that these ties are biological, with little attention paid to the role of family complexity across three generations. Understanding the demographics of step-grandparenthood sheds light on the family experiences of an overlooked, but growing segment of the older adult population in the United States. © The Author(s) 2018. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Consequences of partial and severe dopaminergic lesion on basal ganglia oscillatory activity and akinesia.

PubMed

Tseng, Kuei Y; Kargieman, Lucila; Gacio, Sebastian; Riquelme, Luis A; Murer, M Gustavo

2005-11-01

Severe chronic dopamine (DA) depletion increases the proportion of neurons in the basal ganglia that fire rhythmic bursts of action potential (LFO units) synchronously with the cortical oscillations. Here we report on how different levels of mesencephalic DA denervation affect substantia nigra pars reticulata (SNpr) neuronal activity in the rat and its relationship to akinesia (stepping test). Chronic nigrostriatal lesion induced with 0 (control group), 4, 6 or 8 microg of 6-hydroxydopamine (6-OHDA) into the medial forebrain bundle resulted in a dose-dependent decrease of tyrosine hydroxylase positive (TH+) neurons in the SN and ventral tegmental area (VTA). Although 4 microg of 6-OHDA reduced the number of TH+ neurons in the SN by approximately 60%, both stepping test performance and SNpr neuronal activity remained indistinguishable from control animals. By contrast, animals that received 6 microg of 6-OHDA showed a marked reduction of TH+ cells in the SN ( approximately 75%) and VTA ( approximately 55%), a significant stepping test deficit and an increased proportion of LFO units. These changes were not dramatically enhanced with 8 microg 6-OHDA, a dose that induced an extensive DA lesion (> 95%) in the SN and approximately 70% reduction of DA neurons in the VTA. These results suggest a threshold level of DA denervation for both the appearance of motor deficits and LFO units. Thus, the presence of LFO activity in the SNpr is not related to a complete nigrostriatal DA neuron depletion (ultimate stage parkinsonism); instead, it may reflect a functional disruption of cortico-basal ganglia dynamics associated with clinically relevant stages of the disease.

Oxygen and sulfur adsorption on vicinal surfaces of copper and silver: Preferred adsorption sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Da-Jiang; Thiel, Patricia A.

We present an extensive density functional theory (DFT) study of adsorption site energetics for oxygen and sulfur adsorbed on two vicinal surfaces of Cu and Ag, with the goal of identifying the most stable adsorption site(s), identifying trends and common themes, and comparing with experimental work in the literature where possible. We also present benchmark calculations for adsorption on the flat (111) and (100) surfaces. The first vicinal surface is the (211), and results are similar for both metals. Here, we find that the step-doubling reconstruction is favored with both adsorbates and is driven by the creation of a specialmore » stable fourfold hollow (4fh) site at the reconstructed step. Zig-zag chain structures consisting of X–M–X units (X = chalcogen, M = metal) at the step edge are considered, in which the special 4fh site is partially occupied. The zig-zag configuration is energetically competitive for oxygen but not sulfur. DFT results for oxygen agree with experiment in terms of the stability of the reconstruction, but contradict the original site assignment. The second vicinal surface is the (410), where again results are similar for both metals. For oxygen, DFT predicts that step sites are filled preferentially even at lowest coverage, followed by terrace sites, consistent with the experiment. For sulfur, in contrast, DFT predicts that terrace sites fill first. Oxygen forms O–M–O rows on the top edge of the step, where it occupies incomplete 4fh sites. This resolves an experimental ambiguity in the site assignment. Finally, for both the (211) and (410) surfaces, the interaction energy that stabilizes the X–M–X chain or row correlates with the linearity of the X–M–X unit, which may explain key differences between oxygen and sulfur.« less

Oxygen and sulfur adsorption on vicinal surfaces of copper and silver: Preferred adsorption sites

DOE PAGES

Liu, Da-Jiang; Thiel, Patricia A.

2018-03-28

We present an extensive density functional theory (DFT) study of adsorption site energetics for oxygen and sulfur adsorbed on two vicinal surfaces of Cu and Ag, with the goal of identifying the most stable adsorption site(s), identifying trends and common themes, and comparing with experimental work in the literature where possible. We also present benchmark calculations for adsorption on the flat (111) and (100) surfaces. The first vicinal surface is the (211), and results are similar for both metals. Here, we find that the step-doubling reconstruction is favored with both adsorbates and is driven by the creation of a specialmore » stable fourfold hollow (4fh) site at the reconstructed step. Zig-zag chain structures consisting of X–M–X units (X = chalcogen, M = metal) at the step edge are considered, in which the special 4fh site is partially occupied. The zig-zag configuration is energetically competitive for oxygen but not sulfur. DFT results for oxygen agree with experiment in terms of the stability of the reconstruction, but contradict the original site assignment. The second vicinal surface is the (410), where again results are similar for both metals. For oxygen, DFT predicts that step sites are filled preferentially even at lowest coverage, followed by terrace sites, consistent with the experiment. For sulfur, in contrast, DFT predicts that terrace sites fill first. Oxygen forms O–M–O rows on the top edge of the step, where it occupies incomplete 4fh sites. This resolves an experimental ambiguity in the site assignment. Finally, for both the (211) and (410) surfaces, the interaction energy that stabilizes the X–M–X chain or row correlates with the linearity of the X–M–X unit, which may explain key differences between oxygen and sulfur.« less

A web-based tool for the Comprehensive Unit-based Safety Program (CUSP).

PubMed

Pronovost, Peter J; King, Jay; Holzmueller, Christine G; Sawyer, Melinda; Bivens, Shauna; Michael, Michelle; Haig, Kathy; Paine, Lori; Moore, Dana; Miller, Marlene

2006-03-01

An organization's ability to change is driven by its culture, which in turn has a significant impact on safety. The six-step Comprehensive Unit-Based Safety Program (CUSP) is intended to improve local culture and safety. A Web-based project management tool for CUSP was developed and then pilot tested at two hospitals. HOW ECUSP WORKS: Once a patient safety concern is identified (step 3), a unit-level interdisciplinary safety committee determines issue criticality and starts up the projects (step 4), which are managed using project management tools within eCUSP (step 5). On a project's completion, the results are disseminated through a shared story (step 6). OSF St. Joseph's Medical Center-The Medical Birthing Center (Bloomington, Illinois), identified 11 safety issues, implemented 11 projects, and created 9 shared stories--including one for its Armband Project. The Johns Hopkins Hospital (Baltimore) Medical Progressive Care (MPC4) Unit identified 5 safety issues and implemented 4 ongoing projects, including the intravenous (IV) Tubing Compliance Project. The eCUSP tool's success depends on an organizational commitment to creating a culture of safety.

The efficacy of interactive, motion capture-based rehabilitation on functional outcomes in an inpatient stroke population: a randomized controlled trial.

PubMed

Cannell, John; Jovic, Emelyn; Rathjen, Amy; Lane, Kylie; Tyson, Anna M; Callisaya, Michele L; Smith, Stuart T; Ahuja, Kiran Dk; Bird, Marie-Louise

2018-02-01

To compare the efficacy of novel interactive, motion capture-rehabilitation software to usual care stroke rehabilitation on physical function. Randomized controlled clinical trial. Two subacute hospital rehabilitation units in Australia. In all, 73 people less than six months after stroke with reduced mobility and clinician determined capacity to improve. Both groups received functional retraining and individualized programs for up to an hour, on weekdays for 8-40 sessions (dose matched). For the intervention group, this individualized program used motivating virtual reality rehabilitation and novel gesture controlled interactive motion capture software. For usual care, the individualized program was delivered in a group class on one unit and by rehabilitation assistant 1:1 on the other. Primary outcome was standing balance (functional reach). Secondary outcomes were lateral reach, step test, sitting balance, arm function, and walking. Participants (mean 22 days post-stroke) attended mean 14 sessions. Both groups improved (mean (95% confidence interval)) on primary outcome functional reach (usual care 3.3 (0.6 to 5.9), intervention 4.1 (-3.0 to 5.0) cm) with no difference between groups ( P = 0.69) on this or any secondary measures. No differences between the rehabilitation units were seen except in lateral reach (less affected side) ( P = 0.04). No adverse events were recorded during therapy. Interactive, motion capture rehabilitation for inpatients post stroke produced functional improvements that were similar to those achieved by usual care stroke rehabilitation, safely delivered by either a physical therapist or a rehabilitation assistant.

An Exploratory Study of Functional Status in Post Cardiac Arrest Survivors Discharged To Home

DTIC Science & Technology

2005-08-01

estimate of the calories burned throughout the day. It measured vertical acceleration (i.e., up and down motion) and total caloric expenditure (i.e...an estimate of caloric expenditure and the intensity of one’s activity; the higher the intensity, the more calories the unit registered. A small...number of daily steps taken. It measures vertical acceleration (i.e., up and down motion) and total caloric expenditure (i.e., the calories one’s

Use of Curricular and Extracurricular Assessments to Predict Performance on the United States Medical Licensing Examination (USMLE) Step 1: A Multi-Year Study

ERIC Educational Resources Information Center

Gandy, Robyn A.; Herial, Nabeel A.; Khuder, Sadik A.; Metting, Patricia J.

2008-01-01

This paper studies student performance predictions based on the United States Medical Licensure Exam (USMLE) Step 1. Subjects were second-year medical students from academic years of 2002 through 2006 (n = 711). Three measures of basic science knowledge (two curricular and one extracurricular) were evaluated as predictors of USMLE Step 1 scores.…

Spectroscopic classification of icy satellites of Saturn II: Identification of terrain units on Rhea

NASA Astrophysics Data System (ADS)

Scipioni, F.; Tosi, F.; Stephan, K.; Filacchione, G.; Ciarniello, M.; Capaccioni, F.; Cerroni, P.

2014-05-01

Rhea is the second largest icy satellites of Saturn and it is mainly composed of water ice. Its surface is characterized by a leading hemisphere slightly brighter than the trailing side. The main goal of this work is to identify homogeneous compositional units on Rhea by applying the Spectral Angle Mapper (SAM) classification technique to Rhea’s hyperspectral images acquired by the Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini Orbiter in the infrared range (0.88-5.12 μm). The first step of the classification is dedicated to the identification of Rhea’s spectral endmembers by applying the k-means unsupervised clustering technique to four hyperspectral images representative of a limited portion of the surface, imaged at relatively high spatial resolution. We then identified eight spectral endmembers, corresponding to as many terrain units, which mostly distinguish for water ice abundance and ice grain size. In the second step, endmembers are used as reference spectra in SAM classification method to achieve a comprehensive classification of the entire surface. From our analysis of the infrared spectra returned by VIMS, it clearly emerges that Rhea’ surface units shows differences in terms of water ice bands depths, average ice grain size, and concentration of contaminants, particularly CO2 and hydrocarbons. The spectral units that classify optically dark terrains are those showing suppressed water ice bands, a finer ice grain size and a higher concentration of carbon dioxide. Conversely, spectral units labeling brighter regions have deeper water ice absorption bands, higher albedo and a smaller concentration of contaminants. All these variations reflect surface’s morphological and geological structures. Finally, we performed a comparison between Rhea and Dione, to highlight different magnitudes of space weathering effects in the icy satellites as a function of the distance from Saturn.

Preclinic group education sessions reduce waiting times and costs at public pain medicine units.

PubMed

Davies, Stephanie; Quintner, John; Parsons, Richard; Parkitny, Luke; Knight, Paul; Forrester, Elizabeth; Roberts, Mary; Graham, Carl; Visser, Eric; Antill, Tracy; Packer, Tanya; Schug, Stephan A

2011-01-01

To assess the effects of preclinic group education sessions and system redesign on tertiary pain medicine units and patient outcomes. Prospective cohort study. Two public hospital multidisciplinary pain medicine units. People with persistent pain. A system redesign from a "traditional" model (initial individual medical appointments) to a model that delivers group education sessions prior to individual appointments. Based on Patient Triage Questionnaires patients were scheduled to attend Self-Training Educative Pain Sessions (STEPS), a two day eight hour group education program, followed by optional patient-initiated clinic appointments. Number of patients completing STEPS who subsequently requested individual outpatient clinic appointment(s); wait-times; unit cost per new patient referred; recurrent health care utilization; patient satisfaction; Global Perceived Impression of Change (GPIC); and utilized pain management strategies. Following STEPS 48% of attendees requested individual outpatient appointments. Wait times reduced from 105.6 to 16.1 weeks at one pain unit and 37.3 to 15.2 weeks at the second. Unit cost per new patient appointed reduced from $1,805 Australian Dollars (AUD) to AUD$541 (for STEPS). At 3 months, patients scored their satisfaction with "the treatment received for their pain" more positively than at baseline (change score=0.88; P=0.0003), GPIC improved (change score=0.46; P<0.0001) and mean number of active strategies utilized increased by 4.12 per patient (P=0.0004). The introduction of STEPS was associated with reduced wait-times and costs at public pain medicine units and increased both the use of active pain management strategies and patient satisfaction. Wiley Periodicals, Inc.

[Neuronal and synaptic properties: fundamentals of network plasticity].

PubMed

Le Masson, G

2000-02-01

Neurons, within the nervous system, are organized in different neural networks through synaptic connections. Two fundamental components are dynamically interacting in these functional units. The first one are the neurons themselves, and far from being simple action potential generators, they are capable of complex electrical integrative properties due to various types, number, distribution and modulation of voltage-gated ionic channels. The second elements are the synapses where a similar complexity and plasticity is found. Identifying both cellular and synaptic intrinsic properties is necessary to understand the links between neural networks behavior and physiological function, and is a useful step towards a better control of neurological diseases.

Inhibition of amyloid oligomerization into different supramolecular architectures by small molecules: mechanistic insights and design rules.

PubMed

Brahmachari, Sayanti; Paul, Ashim; Segal, Daniel; Gazit, Ehud

2017-05-01

Protein misfolding and aggregation have been associated with several human disorders, including Alzheimer's, Parkinson's and Huntington's diseases, as well as senile systemic amyloidosis and Type II diabetes. However, there is no current disease-modifying therapy available for the treatment of these disorders. In spite of extensive academic, pharmaceutical, medicinal and clinical research, a complete mechanistic model for this family of diseases is still lacking. In this review, we primarily discuss the different types of small molecular entities which have been used for the inhibition of the aggregation process of different amyloidogenic proteins under diseased conditions. These include small peptides, polyphenols, inositols, quinones and their derivatives, and metal chelator molecules. In recent years, these groups of molecules have been extensively studied using in vitro, in vivo and computational models to understand their mechanism of action and common structural features underlying the process of inhibition. A salient feature found to be instrumental in the process of inhibition is the balance between the aromatic unit that functions as the amyloid recognition unit and the hydrophilic amyloid breaker unit. The establishment of structure-function relationship for amyloid-modifying therapies by the various functional entities should serve as an important step toward the development of efficient therapeutics.

Patient-reported outcome measures versus inertial performance-based outcome measures: A prospective study in patients undergoing primary total knee arthroplasty.

PubMed

Bolink, S A A N; Grimm, B; Heyligers, I C

2015-12-01

Outcome assessment of total knee arthroplasty (TKA) by subjective patient reported outcome measures (PROMs) may not fully capture the functional (dis-)abilities of relevance. Objective performance-based outcome measures could provide distinct information. An ambulant inertial measurement unit (IMU) allows kinematic assessment of physical performance and could potentially be used for routine follow-up. To investigate the responsiveness of IMU measures in patients following TKA and compare outcomes with conventional PROMs. Patients with end stage knee OA (n=20, m/f=7/13; age=67.4 standard deviation 7.7 years) were measured preoperatively and one year postoperatively. IMU measures were derived during gait, sit-stand transfers and block step-up transfers. PROMs were assessed by using the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and Knee Society Score (KSS). Responsiveness was calculated by the effect size, correlations were calculated with Spearman's rho correlation coefficient. One year after TKA, patients performed significantly better at gait, sit-to-stand transfers and block step-up transfers. Measures of time and kinematic IMU measures demonstrated significant improvements postoperatively for each performance-based test. The largest improvement was found in block step-up transfers (effect size=0.56-1.20). WOMAC function score and KSS function score demonstrated moderate correlations (Spearman's rho=0.45-0.74) with some of the physical performance-based measures pre- and postoperatively. To characterize the changes in physical function after TKA, PROMs could be supplemented by performance-based measures, assessing function during different activities and allowing kinematic characterization with an ambulant IMU. Copyright © 2015 Elsevier B.V. All rights reserved.

Design and Parameter Study of Integrated Microfluidic Platform for CTC Isolation and Enquiry; A Numerical Approach.

PubMed

Shamloo, Amir; Ahmad, Saba; Momeni, Maede

2018-06-18

Being the second cause of mortality across the globe, there is now a persistent effort to establish new cancer medication and therapies. Any accomplishment in treating cancers entails the existence of accurate identification systems empowering the early diagnosis. Recent studies indicate CTCs’ potential in cancer prognosis as well as therapy monitoring. The chief shortcoming with CTCs is that they are exceedingly rare cells in their clinically relevant concentration. Here, we simulated a microfluidic construct devised for immunomagnetic separation of the particles of interest from the background cells. This separation unit is integrated with a mixer subunit. The mixer is envisioned for mixing the CTC enriched stream with lysis buffer to extract the biological material of the cell. Some modification was proposed on mixing geometry improving the efficacy of the functional unit. A valuation of engaged forces was made and some forces were neglected due to their order of magnitude. The position of the magnet was also optimized by doing parametric study. For the mixer unit, the effect of applied voltage and frequency on mixing index was studied to find the optimal voltage and frequency which provides better mixing. Above-mentioned studies were done on isolated units and the effect of each functional unit on the other is not studied. As the final step, an integrated microfluidic platform composed of both functional subunits was simulated simultaneously. To ensure the independence of results from the grid, grid studies were also performed. The studies carried out on the construct reveal its potential for diagnostic application.

Measuring and Improving Quality in Early Childhood Environments

ERIC Educational Resources Information Center

Bernard van Leer Foundation, 2015

2015-01-01

The International Consultation, convened in Leiden (the Netherlands) in September 2014, brought together early childhood experts and stakeholders--supported by the International Step by Step Association (ISSA), the United Nations Children's Fund (UNICEF), the United Nations Educational, Scientific, and Cultural Organization (UNESCO) and the…

Assessment of power step performances of variable speed pump-turbine unit by means of hydro-electrical system simulation

NASA Astrophysics Data System (ADS)

Béguin, A.; Nicolet, C.; Hell, J.; Moreira, C.

2017-04-01

The paper explores the improvement in ancillary services that variable speed technologies can provide for the case of an existing pumped storage power plant of 2x210 MVA which conversion from fixed speed to variable speed is investigated with a focus on the power step performances of the units. First two motor-generator variable speed technologies are introduced, namely the Doubly Fed Induction Machine (DFIM) and the Full Scale Frequency Converter (FSFC). Then a detailed numerical simulation model of the investigated power plant used to simulate power steps response and comprising the waterways, the pump-turbine unit, the motor-generator, the grid connection and the control systems is presented. Hydroelectric system time domain simulations are performed in order to determine the shortest response time achievable, taking into account the constraints from the maximum penstock pressure and from the rotational speed limits. It is shown that the maximum instantaneous power step response up and down depends on the hydro-mechanical characteristics of the pump-turbine unit and of the motor-generator speed limits. As a results, for the investigated test case, the FSFC solution offer the best power step response performances.

The effect of social integration on outcomes after major lower extremity amputation.

PubMed

Hawkins, Alexander T; Pallangyo, Anthony J; Herman, Ayesiga M; Schaumeier, Maria J; Smith, Ann D; Hevelone, Nathanael D; Crandell, David M; Nguyen, Louis L

2016-01-01

Major lower extremity (MLE) amputation is a common procedure that results in a profound change in a patient's life. We sought to determine the association between social support and outcomes after amputation. We hypothesized that patients with greater social support will have better post amputation outcomes. From November 2011 to May 2013, we conducted a cross-sectional, observational, multicenter study. Social integration was measured by the social integration subset of the Short Form Craig Handicap Assessment and Reporting Technique. Systemic social support was assessed by comparing a United States and Tanzanian population. Walking function was measured using the 6-minute walk test and quality of life (QoL) was measured using the EuroQol-5D. We recruited 102 MLE amputees. Sixty-three patients were enrolled in the United States with a mean age of 58.0. Forty-two (67%) were male. Patients with low social integration were more likely to be unable to ambulate (no walk 39% vs slow walk 23% vs fast walk 10%; P = .01) and those with high social integration were more likely to be fast walkers (no walk 10% vs slow walk 59% vs fast walk 74%; P = .01). This relationship persisted in a multivariable analysis. Increasing social integration scores were also positively associated with increasing QoL scores in a multivariable analysis (β, .002; standard error, 0.0008; P = .02). In comparing the United States population with the Tanzanian cohort (39 subjects), there were no differences between functional or QoL outcomes in the systemic social support analysis. In the United States population, increased social integration is associated with both improved function and QoL outcomes among MLE amputees. Systemic social support, as measured by comparing the United States population with a Tanzanian population, was not associated with improved function or QoL outcomes. In the United States, steps should be taken to identify and aid amputees with poor social integration. Copyright © 2016 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

A Reference Unit on Home Vegetable Gardening.

ERIC Educational Resources Information Center

McCully, James S., Comp.; And Others

Designed to provide practical, up-to-date, basic information on home gardening for vocational agriculture students with only a limited knowledge of vegetable gardening, this reference unit includes step-by-step procedures for planning, planting, cultivating, harvesting, and processing vegetables in a small plot. Topics covered include plot…

Antibacterial Drug Releasing Materials by Post-Polymerization Surface Modification

NASA Astrophysics Data System (ADS)

Chng, Shuyun; Moloney, Mark G.; Wu, Linda Y. L.

Functional materials are available by the post-polymerization surface modification of diverse polymers in a three-step process mediated, firstly, by carbene insertion chemistry, secondly, by diazonium coupling, and thirdly by modification with a remotely tethered spiropyran unit, and these materials may be used for the reversible binding and release of Penicillin V. Surface loading densities of up to 0.19mmol/g polymer are achievable, leading to materials with higher loading densities and release behavior relative to unmodified controls, and observable antibacterial biocidal activity.

A comparative investigation of SO2 oxidative transfer over CuO with a CeO2 surface

NASA Astrophysics Data System (ADS)

Liu, Yifeng; Shen, Benxian; Pi, Zhipeng; Chen, Hua; Zhao, Jigang

2017-04-01

To further improve the catalytic desulfurization function of the Mg-Al spinel sulfur transfer agent in a fluid catalytic cracking (FCC) unit, the reaction paths of SO2 oxidation by O2 over the metal oxide surface of CuO (111) and CeO2 (111) were investigated. In reference to the fact that SO2 reacting with O2 over CuO was a Mars-van Krevelen cycle, a similar reaction law for SO2 oxidation over CeO2 was also verified by characterization methods (e.g., IR, XPS). Meanwhile, the molecular simulation results indicated that the rate-control step of SO2 oxidation over CeO2 (111) and CuO (111) was a SO3 desorption step. The lower energy barrier in the rate-control step corresponded to better catalytic performance; hence, it could explain the reason that CeO2 had a better sulfur oxidization transfer performance than CuO.

From identification and review to action--maternal mortality review in the United States.

PubMed

Berg, Cynthia J

2012-02-01

The maternal mortality review process is an ongoing quality improvement cycle with 5 steps: identification of maternal deaths, collection of medical and other data on the events surrounding the death, review and synthesis of the data to identify potentially alterable factors, the development and implementation of interventions to decrease the risk of future deaths, and evaluation of the results. The most important step is utilization of the data to identify and implement evidence-based actions; without this step, the rest of the work will not have an impact. The review committee ideally is based in the health department of a state (or large city) as a core public health function. This provides stability for the process as well as facilitates implementation of the review committees' recommendations. The review committee should be multidisciplinary, with its members being official representatives of their organizations or departments, again to improve buy-in of the stakeholders. Published by Elsevier Inc.

Comparison of IMRT planning with two-step and one-step optimization: a strategy for improving therapeutic gain and reducing the integral dose

NASA Astrophysics Data System (ADS)

Abate, A.; Pressello, M. C.; Benassi, M.; Strigari, L.

2009-12-01

The aim of this study was to evaluate the effectiveness and efficiency in inverse IMRT planning of one-step optimization with the step-and-shoot (SS) technique as compared to traditional two-step optimization using the sliding windows (SW) technique. The Pinnacle IMRT TPS allows both one-step and two-step approaches. The same beam setup for five head-and-neck tumor patients and dose-volume constraints were applied for all optimization methods. Two-step plans were produced converting the ideal fluence with or without a smoothing filter into the SW sequence. One-step plans, based on direct machine parameter optimization (DMPO), had the maximum number of segments per beam set at 8, 10, 12, producing a directly deliverable sequence. Moreover, the plans were generated whether a split-beam was used or not. Total monitor units (MUs), overall treatment time, cost function and dose-volume histograms (DVHs) were estimated for each plan. PTV conformality and homogeneity indexes and normal tissue complication probability (NTCP) that are the basis for improving therapeutic gain, as well as non-tumor integral dose (NTID), were evaluated. A two-sided t-test was used to compare quantitative variables. All plans showed similar target coverage. Compared to two-step SW optimization, the DMPO-SS plans resulted in lower MUs (20%), NTID (4%) as well as NTCP values. Differences of about 15-20% in the treatment delivery time were registered. DMPO generates less complex plans with identical PTV coverage, providing lower NTCP and NTID, which is expected to reduce the risk of secondary cancer. It is an effective and efficient method and, if available, it should be favored over the two-step IMRT planning.

Topics in Mathematics.

ERIC Educational Resources Information Center

Posey, Johnsie Jo, Ed.; And Others

This manual is a collection of materials and teaching strategies to motivate the development of mathematical ideas in secondary school mathematics programs or in beginning college mathematics programs. The unit is written for the instructor with step-by-step procedures including lists of needed materials. The exercises in this unit also appear in…

INTELLIGENCE SUPPORT TO JOINT TARGETING IN THE A2/AD ENVIRONMENT

DTIC Science & Technology

2016-02-10

budgets. Finally, the dismal state of targeting personnel training and development must be rectified . These steps must be taken before the United... rectified . These steps must be taken before the United States faces a near-peer adversary employing A2/AD capabilities. Bibliography ACC/A2. Air Force

The efficacy of interactive, motion capture-based rehabilitation on functional outcomes in an inpatient stroke population: a randomized controlled trial

PubMed Central

Cannell, John; Jovic, Emelyn; Rathjen, Amy; Lane, Kylie; Tyson, Anna M; Callisaya, Michele L; Smith, Stuart T; Ahuja, Kiran DK; Bird, Marie-Louise

2017-01-01

Objective: To compare the efficacy of novel interactive, motion capture-rehabilitation software to usual care stroke rehabilitation on physical function. Design: Randomized controlled clinical trial. Setting: Two subacute hospital rehabilitation units in Australia. Participants: In all, 73 people less than six months after stroke with reduced mobility and clinician determined capacity to improve. Interventions: Both groups received functional retraining and individualized programs for up to an hour, on weekdays for 8–40 sessions (dose matched). For the intervention group, this individualized program used motivating virtual reality rehabilitation and novel gesture controlled interactive motion capture software. For usual care, the individualized program was delivered in a group class on one unit and by rehabilitation assistant 1:1 on the other. Main measures: Primary outcome was standing balance (functional reach). Secondary outcomes were lateral reach, step test, sitting balance, arm function, and walking. Results: Participants (mean 22 days post-stroke) attended mean 14 sessions. Both groups improved (mean (95% confidence interval)) on primary outcome functional reach (usual care 3.3 (0.6 to 5.9), intervention 4.1 (−3.0 to 5.0) cm) with no difference between groups (P = 0.69) on this or any secondary measures. No differences between the rehabilitation units were seen except in lateral reach (less affected side) (P = 0.04). No adverse events were recorded during therapy. Conclusion: Interactive, motion capture rehabilitation for inpatients post stroke produced functional improvements that were similar to those achieved by usual care stroke rehabilitation, safely delivered by either a physical therapist or a rehabilitation assistant. PMID:28719977

Nanofibers implant functionalized by neural growth factor as a strategy to innervate a bioengineered tooth.

PubMed

Eap, Sandy; Bécavin, Thibault; Keller, Laetitia; Kökten, Tunay; Fioretti, Florence; Weickert, Jean-Luc; Deveaux, Etienne; Benkirane-Jessel, Nadia; Kuchler-Bopp, Sabine

2014-03-01

Current strategies for jaw reconstruction require multiple procedures, to repair the bone defect, to offer sufficient support, and to place the tooth implant. The entire procedure can be painful and time-consuming, and the desired functional repair can be achieved only when both steps are successful. The ability to engineer combined tooth and bone constructs, which would grow in a coordinated fashion with the surrounding tissues, could potentially improve the clinical outcomes and also reduce patient suffering. A unique nanofibrous and active implant for bone-tooth unit regeneration and also the innervation of this bioengineered tooth are demonstrated. A nanofibrous polycaprolactone membrane is functionalized with neural growth factor, along with dental germ, and tooth innervation follows. Such innervation allows complete functionality and tissue homeostasis of the tooth, such as dentinal sensitivity, odontoblast function, masticatory forces, and blood flow. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Comparison of Simple Methods to Incorporate Material Temperature Dependency in the Green's Function Method for Estimating Transient Thermal Stresses in Thick-Walled Power Plant Components.

PubMed

Rouse, James; Hyde, Christopher

2016-01-06

The threat of thermal fatigue is an increasing concern for thermal power plant operators due to the increasing tendency to adopt "two-shifting" operating procedures. Thermal plants are likely to remain part of the energy portfolio for the foreseeable future and are under societal pressures to generate in a highly flexible and efficient manner. The Green's function method offers a flexible approach to determine reference elastic solutions for transient thermal stress problems. In order to simplify integration, it is often assumed that Green's functions (derived from finite element unit temperature step solutions) are temperature independent (this is not the case due to the temperature dependency of material parameters). The present work offers a simple method to approximate a material's temperature dependency using multiple reference unit solutions and an interpolation procedure. Thermal stress histories are predicted and compared for realistic temperature cycles using distinct techniques. The proposed interpolation method generally performs as well as (if not better) than the optimum single Green's function or the previously-suggested weighting function technique (particularly for large temperature increments). Coefficients of determination are typically above 0 . 96 , and peak stress differences between true and predicted datasets are always less than 10 MPa.

Emphysematous pyelonephritis with calculus: Management strategies.

PubMed

Goel, Tanmaya; Reddy, Sreedhar; Thomas, Joseph

2007-07-01

Emphysematous pyelonephritis (EPN) with calculus is well recognized but with very few reports on its treatment. Our aim is to elucidate our experience in its successful management. Over four years, we diagnosed seven cases (eight renal units) of EPN, out of which two patients (three renal units) had EPN with urinary calculi. After the initial conservative management of EPN, the stones were tackled appropriately. EPN was initially managed effectively with antibiotics and supportive care. Once the patient was stable, the stones were cleared in a step-wise fashion. The associated postoperative complications were also tackled efficiently with preservation of renal function. In EPN with stones, nephrectomy is not the sole option available and they can be effectively managed with open / endoscopic measures.

Normative data for Farsi-speaking Iranians in the United States on measures of executive functioning.

PubMed

Avila, Justina F; Verney, Steven P; Kauzor, Kaitlyn; Flowers, Amina; Mehradfar, Maryam; Razani, Jill

2018-01-09

As the Farsi-speaking Iranian population continues to grow in the United States, examination of their cognitive performance is an imperative first step to providing this group with culturally competent services. Thirty-six healthy primarily Farsi-speaking Iranian adults completed Farsi-translated and adapted versions of three frequently used measures of executive/subcortical functioning: Wisconsin Card Sorting Test (WCST), Trail Making Test (TMT), and Color Trails Test (CTT). Participants' performance on each measure was compared to published normative data resulting in 0-85% of cognitively and medically healthy individuals being classified as impaired depending on the executive/subcortical test score examined, with the highest impairment rates for specific WCST outcome scores. These findings raise questions for the use of published norms with Farsi-speaking Iranians residing in the US. The present study provided normative data from this group of Farsi-speaking Iranians on the Farsi-translated and adapted versions of the WCST, TMT, and CTT.

Improving Photocatalytic Activity through Electrostatic Self-Assembly: Polyelectrolytes as Tool for Solar Energy Conversion?

NASA Astrophysics Data System (ADS)

Groehn, Franziska

2015-03-01

With regard to the world's decreasing energy resources, developing strategies to exploit solar energy become more and more important. One approach is to take advantage of photocatalysis. Inspired by natural systems such as assemblies performing photosynthesis, it is highly promising to self-assemble synthetic functional species to form more effective or tailored supramolecular units. In this contribution, a new type of photocatalytically active self-assembled nanostructures in aqueous solution will be presented: supramolecular nano-objects obtained through self-assembly of macroions and multivalent organic or inorganic counterions. Polyelectrolyte-porphyrin nanoscale assemblies exhibit up to 10-fold higher photocatalytic activity than the corresponding porphyrins without polymeric template. Other self-assembled catalysts based on polyelectrolytes can exhibit expressed selectivity in a photocatalytic model reaction or even allow catalytic reactions in solution that are not possible with the building blocks only. Further, current results on combining different functional units at the polyelectrolyte template represent a next step towards more complex supramolecular structures for solar energy conversion.

Cyprus mothers׳ breast feeding self-efficacy and their perceptions about the implementation of the '10 steps' in the first 48hours after birth.

PubMed

Hadjiona, Vasiliki; Middleton, Nicos; Kouta, Christiana; Hadjigeorgiou, Eleni; Lambrinou, Ekaterini; Kolokotroni, Ourania

2016-05-01

more than two decades after the launch of the '10 steps' for successful breast feeding, there is still concern that implementation is suboptimal. Commonly, studies assess the level of implementation based on self-assessments from maternity staff and more rarely based on the mothers' own experience. To date, there has been only anecdotal evidence with regards to the implementation of the '10 steps' in Cyprus while there is general lack of research data on breast feeding in this country. this study assessed breast feeding self-efficacy among mothers during the first 48hours after birth and explored their views with regards to the implementation of the '10 steps' across public and private maternity units in Nicosia, Cyprus. this is a descriptive study with a consecutive sample of 216 mothers, aged at least 18, who gave birth to a full-term healthy infant between January and April 2014. Two data collection tools were used: Section 4 of the BFHI (Baby Friendly Hospital Initiative) questionnaire referring to mothers' self-assessment of maternity unit practices and the BSES-SF (Breast feeding Self-Efficacy Scale - Short Form) which measures perceived self-efficacy in bryeast feeding. midwifery assistance for breast feeding skills development along with encouragement of breast feeding on demand (steps 5 and 8) were identified by mothers as the steps they were more likely to have experienced. In addition, there appeared to be relatively good adherence to the International Code of Marketing of Breast-milk Substitutes. In contrast, it seems that step 7(rooming-in), step 9 (no pacifiers) and step 10 (breast feeding support after discharge) were not systematically practiced. While a higher percentage of mothers in public maternity units reported being informed about the importance of skin-to-skin contact compared to the private sector (51.5% versus 25.7%), there does not appear to be much difference in terms of its actual practice which is generally low (29.0% versus 25.4%). Exclusive breast feeding (step 6) was low (21.7%) while the mean score of breast feeding self-efficacy at 48hours was 3.33 (0.87SD) on a 5-point Likert scale. it appears that mothers in Cyprus had limited experience of the '10 steps' during their stay Nicosia maternity units. This, along with the fact that exclusive breast feeding and breast feeding self-efficacy were rather low, suggests the need for interventions that will enhance breastfeeding self-efficacy and empower mothers to initiate breast feeding while at the maternity unit. In particular, the limited information to mothers upon leaving the maternity unit highlights the lack of maternal support services in the community. Copyright © 2016 Elsevier Ltd. All rights reserved.

Taoscore Teacher's Guides: Phase 4.

ERIC Educational Resources Information Center

Taos Municipal Schools, NM.

A teacher's guide to six career education units--one for each of the elementary grades--has been compiled from a series of complete guides for each grade. Each of the six representative units includes step-by-step instructions for teacher activities in preparing and carrying out a simulated career experience; related curriculum concepts in math,…

Single-step electrochemical functionalization of double-walled carbon nanotube (DWCNT) membranes and the demonstration of ionic rectification

PubMed Central

2013-01-01

Carbon nanotube (CNT) membranes allow the mimicking of natural ion channels for applications in drug delivery and chemical separation. Double-walled carbon nanotube membranes were simply functionalized with dye in a single step instead of the previous two-step functionalization. Non-faradic electrochemical impedance spectra indicated that the functionalized gatekeeper by single-step modification can be actuated to mimic the protein channel under bias. This functional chemistry was proven by a highly efficient ion rectification, wherein the highest experimental rectification factor of ferricyanide was up to 14.4. One-step functionalization by electrooxidation of amine provides a simple and promising functionalization chemistry for the application of CNT membranes. PMID:23758999

Direct current power delivery system and method

DOEpatents

Zhang, Di; Garces, Luis Jose; Dai, Jian; Lai, Rixin

2016-09-06

A power transmission system includes a first unit for carrying out the steps of receiving high voltage direct current (HVDC) power from an HVDC power line, generating an alternating current (AC) component indicative of a status of the first unit, and adding the AC component to the HVDC power line. Further, the power transmission system includes a second unit for carrying out the steps of generating a direct current (DC) voltage to transfer the HVDC power on the HVDC power line, wherein the HVDC power line is coupled between the first unit and the second unit, detecting a presence or an absence of the added AC component in the HVDC power line, and determining the status of the first unit based on the added AC component.

Method and apparatus for fault tolerance

NASA Technical Reports Server (NTRS)

Masson, Gerald M. (Inventor); Sullivan, Gregory F. (Inventor)

1993-01-01

A method and apparatus for achieving fault tolerance in a computer system having at least a first central processing unit and a second central processing unit. The method comprises the steps of first executing a first algorithm in the first central processing unit on input which produces a first output as well as a certification trail. Next, executing a second algorithm in the second central processing unit on the input and on at least a portion of the certification trail which produces a second output. The second algorithm has a faster execution time than the first algorithm for a given input. Then, comparing the first and second outputs such that an error result is produced if the first and second outputs are not the same. The step of executing a first algorithm and the step of executing a second algorithm preferably takes place over essentially the same time period.

Space Object Collision Probability via Monte Carlo on the Graphics Processing Unit

NASA Astrophysics Data System (ADS)

Vittaldev, Vivek; Russell, Ryan P.

2017-09-01

Fast and accurate collision probability computations are essential for protecting space assets. Monte Carlo (MC) simulation is the most accurate but computationally intensive method. A Graphics Processing Unit (GPU) is used to parallelize the computation and reduce the overall runtime. Using MC techniques to compute the collision probability is common in literature as the benchmark. An optimized implementation on the GPU, however, is a challenging problem and is the main focus of the current work. The MC simulation takes samples from the uncertainty distributions of the Resident Space Objects (RSOs) at any time during a time window of interest and outputs the separations at closest approach. Therefore, any uncertainty propagation method may be used and the collision probability is automatically computed as a function of RSO collision radii. Integration using a fixed time step and a quartic interpolation after every Runge Kutta step ensures that no close approaches are missed. Two orders of magnitude speedups over a serial CPU implementation are shown, and speedups improve moderately with higher fidelity dynamics. The tool makes the MC approach tractable on a single workstation, and can be used as a final product, or for verifying surrogate and analytical collision probability methods.

Estimating a Research and Development Price Index

DTIC Science & Technology

1993-01-01

8330-1399- 8 1. Military research -Prices-United States. 2. Indexation (Economnics)-United States. I. Title U393.5.$54 1993 338.4 3^35507--dc2O 93-20614...3 Step 2. Identifying Changes in Relevant Sector Prices .......... 4 Some General Considerations... 4 Identifying Price Changes ..................................... 6 Detailed Methods for Identifying Price Changes ................ 6 Step 3

Curriculum Guide for Art in the Secondary Schools.

ERIC Educational Resources Information Center

Chicago Board of Education, IL.

This secondary school curriculum guide is written in outline form to simplify the planning of a design-oriented art program. For each of 15 design units, a step-by-step set of instructions is given. Each unit is presented in three stages, each of which is a complete lesson in design. Materials and tools necessary for lesson preparation, motivation…

Quantitative Evaluation of Muscle Function, Gait, and Postural Control in People Experiencing Critical Illness After Discharge From the Intensive Care Unit.

PubMed

Kiriella, Jeevaka B; Araujo, Tamara; Vergara, Martin; Lopez-Hernandez, Laura; Cameron, Jill I; Herridge, Margaret; Gage, William H; Mathur, Sunita

2018-01-01

The path to recovery of muscle strength and mobility following discharge from the intensive care unit (ICU) has not been well described. The study objective was to quantify muscle function, gait, and postural control at 3 and 6 months after discharge in people who were recovering from critical illness and who were ventilated for 7 days or more. This was a nested longitudinal study with continuous inclusion of individuals over a 2-year period and with age- and sex-matched controls. Twenty-four people were tested at 3 months after ICU discharge; 16 of them (67%) were reevaluated at 6 months (post-ICU group). Healthy controls (n = 12) were tested at a single time point. Muscle function of the knee extensors (KEs), plantar flexors (PFs), and dorsiflexors (DFs) was assessed on a dynamometer. Gait was measured using an electronic walkway, and postural control was measured with 2 portable force plates. Muscle weakness was observed across all muscle groups at 3 months, with the greatest strength reductions in the ankle PFs (45%) and DFs (30%). Muscle power was reduced in the PFs and DFs but was not reduced in the KEs. Gait in the post-ICU group was characterized by a narrower step, longer stride, and longer double-support time than in the controls. Improvements were found in KE strength and in stride time and double-support time during gait at 6 months. Leg muscle strength and power had moderate associations with gait velocity, step width, and stride length (r = .44-.65). The small heterogeneous sample of people with a high level of function was a limitation of this study. Muscle strength and power were impaired at 6 months after ICU discharge and were associated with gait parameters. Future studies are needed to examine the role of muscle strength and power training in post-ICU rehabilitation programs to improve mobility. © 2017 American Physical Therapy Association

Breastfeeding Practices and Barriers to Implementing the Ten Steps to Successful Breastfeeding in Mississippi Hospitals.

PubMed

Alakaam, Amir; Lemacks, Jennifer; Yadrick, Kathleen; Connell, Carol; Choi, Hwanseok Winston; Newman, Ray G

2018-05-01

Mississippi has the lowest rates of breastfeeding in the United States at 6 and 12 months. There is growing evidence that the rates and duration of infant breastfeeding improve after hospitals implement the Ten Steps to Successful Breastfeeding; moreover, the Ten Steps approach is considered the standard model for evaluation of breastfeeding practices in birthplaces. Research aim: This study aimed to examine the implementation level of the Ten Steps and identify barriers to implementing the Ten Steps in Mississippi hospitals. A cross-sectional self-report survey was used to answer the research aim. Nurse managers of the birthing and maternity units of all 43 Mississippi hospitals that provided birthing and maternity care were recruited. A response rate of 72% ( N = 31) was obtained. Implementation of the Ten Steps in these hospitals was categorized as low, partial, moderate, or high. The researcher classified implementation in 29% of hospitals as moderate and in 71% as partial. The hospital level of implementation was significantly positively associated with the hospital delivery rate along with the hospital cesarean section rate per year. The main barriers for the implementation process of the Ten Steps reported were resistance to new policies, limited financial and human resources, and lack of support from national and state governments. Breastfeeding practices in Mississippi hospitals need to be improved. New policies need to be established in Mississippi to encourage hospitals to adopt the Ten Steps policies and practice in the maternity and birthing units.

Emphysematous pyelonephritis with calculus: Management strategies

PubMed Central

Goel, Tanmaya; Reddy, Sreedhar; Thomas, Joseph

2007-01-01

Objective: Emphysematous pyelonephritis (EPN) with calculus is well recognized but with very few reports on its treatment. Our aim is to elucidate our experience in its successful management. Materials and Methods: Over four years, we diagnosed seven cases (eight renal units) of EPN, out of which two patients (three renal units) had EPN with urinary calculi. After the initial conservative management of EPN, the stones were tackled appropriately. Results: EPN was initially managed effectively with antibiotics and supportive care. Once the patient was stable, the stones were cleared in a step-wise fashion. The associated postoperative complications were also tackled efficiently with preservation of renal function. Conclusion: In EPN with stones, nephrectomy is not the sole option available and they can be effectively managed with open / endoscopic measures. PMID:19718324

Metal-Free Multiple Carbon-Carbon and Carbon-Hydrogen Bond Activations via Charge-Switching Mechanism in Unstrained Diindolylmethanes.

PubMed

Challa, Chandrasekhar; Varughese, Sunil; Suresh, Cherumuttathu H; Lankalapalli, Ravi S

2017-08-18

A transformation of the unstrained phenol substituted 3,3'-diindolylmethanes (DIPMs) to 2,3'-diindolylketones (DIKs) by double C-C single bond cleavage with associated rearrangements, triggered by phenyliodine(III) diacetate (PIDA), is reported. Density functional theory studies reveal a mechanism involving multiple "charge-switching" steps by synergistic involvement of the two indole units with overall low activation energy. The indole 'charge-switching' mechanism in DIPMs was further extended toward synthesis of a natural product motif cyclohepta[b]indole from biaryl appended DIBM.

Efficient hyperspectral image segmentation using geometric active contour formulation

NASA Astrophysics Data System (ADS)

Albalooshi, Fatema A.; Sidike, Paheding; Asari, Vijayan K.

2014-10-01

In this paper, we present a new formulation of geometric active contours that embeds the local hyperspectral image information for an accurate object region and boundary extraction. We exploit self-organizing map (SOM) unsupervised neural network to train our model. The segmentation process is achieved by the construction of a level set cost functional, in which, the dynamic variable is the best matching unit (BMU) coming from SOM map. In addition, we use Gaussian filtering to discipline the deviation of the level set functional from a signed distance function and this actually helps to get rid of the re-initialization step that is computationally expensive. By using the properties of the collective computational ability and energy convergence capability of the active control models (ACM) energy functional, our method optimizes the geometric ACM energy functional with lower computational time and smoother level set function. The proposed algorithm starts with feature extraction from raw hyperspectral images. In this step, the principal component analysis (PCA) transformation is employed, and this actually helps in reducing dimensionality and selecting best sets of the significant spectral bands. Then the modified geometric level set functional based ACM is applied on the optimal number of spectral bands determined by the PCA. By introducing local significant spectral band information, our proposed method is capable to force the level set functional to be close to a signed distance function, and therefore considerably remove the need of the expensive re-initialization procedure. To verify the effectiveness of the proposed technique, we use real-life hyperspectral images and test our algorithm in varying textural regions. This framework can be easily adapted to different applications for object segmentation in aerial hyperspectral imagery.

Structure and properties of fullerene molecular crystals with linear-scaling van der Waals density functional theory

NASA Astrophysics Data System (ADS)

Mostofi, Arash; Andrinopoulos, Lampros; Hine, Nicholas

2014-03-01

Fullerene molecular crystals are of technological promise for their use in heterojunction photovoltaic cells. An improved theoretical understanding of their structure and properties would be a step towards the rational design of new devices. Simulations based on density-functional theory (DFT) are invaluable for developing such insight, but standard semi-local functionals do not capture the important inter-molecular van der Waals (vdW) interactions in fullerene crystals. Furthermore the computational cost associated with the large unit cells needed are at the limit or beyond the capabilities of traditional DFT methods. In this work we overcome these limitations by using our implementation of a number of vdW-DFs in the ONETEP linear-scaling DFT code to study the structural properties of C60 molecular crystals. Powder neutron diffraction shows that the low-temperature Pa-3 phase is orientationally ordered with individual C60 units rotated around the [111] direction. We fully explore the energy landscape associated with the rotation angle and find two stable structures that are energetically very close, one of which corresponds to the experimentally observed structure. We further consider the effect of orientational disorder in very large supercells of thousands of atoms.

Impact of Preadmission Variables on USMLE Step 1 and Step 2 Performance

ERIC Educational Resources Information Center

Kleshinski, James; Khuder, Sadik A.; Shapiro, Joseph I.; Gold, Jeffrey P.

2009-01-01

Purpose: To examine the predictive ability of preadmission variables on United States Medical Licensing Examinations (USMLE) step 1 and step 2 performance, incorporating the use of a neural network model. Method: Preadmission data were collected on matriculants from 1998 to 2004. Linear regression analysis was first used to identify predictors of…

Acoustic and Perceptual Measures of SATB Choir Performances on Two Types of Portable Choral Riser Units in Three Singer-Spacing Conditions

ERIC Educational Resources Information Center

Daugherty, James F.; Manternach, Jeremy N.; Brunkan, Melissa C.

2013-01-01

Under controlled conditions, we assessed acoustically (long-term average spectra) and perceptually (singer survey, listener survey) six performances of an soprano, alto, tenor, and bass (SATB) choir ("N" = 27) as it sang the same musical excerpt on two portable riser units (standard riser step height, taller riser step height) with…

Design Solutions: Supplement to the Curriculum Guide for Art in the Secondary Schools. Field Test.

ERIC Educational Resources Information Center

Chicago Board of Education, IL.

Intended to clarify the elements and principles of design as stated in the "Curriculum Guide for Art in the Secondary Schools," this illustrated supplement presents 15 design units with step-by-step instructions for clarifying design problems and providing solutions. Each unit is presented in three stages, each of which is a complete…

Bioconjugated iron oxide nanocubes: synthesis, functionalization, and vectorization.

PubMed

Wortmann, Laura; Ilyas, Shaista; Niznansky, Daniel; Valldor, Martin; Arroub, Karim; Berger, Nadja; Rahme, Kamil; Holmes, Justin; Mathur, Sanjay

2014-10-08

A facile bottom-up approach for the synthesis of inorganic/organic bioconjugated nanoprobes based on iron oxide nanocubes as the core with a nanometric silica shell is demonstrated. Surface coating and functionalization protocols developed in this work offered good control over the shell thickness (8-40 nm) and enabled biovectorization of SiO2@Fe3O4 core-shell structures by covalent attachment of folic acid (FA) as a targeting unit for cellular uptake. The successful immobilization of folic acid was investigated both quantitatively (TGA, EA, XPS) and qualitatively (AT-IR, UV-vis, ζ-potential). Additionally, the magnetic behavior of the nanocomposites was monitored after each functionalization step. Cell viability studies confirmed low cytotoxicity of FA@SiO2@Fe3O4 conjugates, which makes them promising nanoprobes for targeted internalization by cells and their imaging.

Aquifer response to stream-stage and recharge variations. II. Convolution method and applications

USGS Publications Warehouse

Barlow, P.M.; DeSimone, L.A.; Moench, A.F.

2000-01-01

In this second of two papers, analytical step-response functions, developed in the companion paper for several cases of transient hydraulic interaction between a fully penetrating stream and a confined, leaky, or water-table aquifer, are used in the convolution integral to calculate aquifer heads, streambank seepage rates, and bank storage that occur in response to streamstage fluctuations and basinwide recharge or evapotranspiration. Two computer programs developed on the basis of these step-response functions and the convolution integral are applied to the analysis of hydraulic interaction of two alluvial stream-aquifer systems in the northeastern and central United States. These applications demonstrate the utility of the analytical functions and computer programs for estimating aquifer and streambank hydraulic properties, recharge rates, streambank seepage rates, and bank storage. Analysis of the water-table aquifer adjacent to the Blackstone River in Massachusetts suggests that the very shallow depth of water table and associated thin unsaturated zone at the site cause the aquifer to behave like a confined aquifer (negligible specific yield). This finding is consistent with previous studies that have shown that the effective specific yield of an unconfined aquifer approaches zero when the capillary fringe, where sediment pores are saturated by tension, extends to land surface. Under this condition, the aquifer's response is determined by elastic storage only. Estimates of horizontal and vertical hydraulic conductivity, specific yield, specific storage, and recharge for a water-table aquifer adjacent to the Cedar River in eastern Iowa, determined by the use of analytical methods, are in close agreement with those estimated by use of a more complex, multilayer numerical model of the aquifer. Streambank leakance of the semipervious streambank materials also was estimated for the site. The streambank-leakance parameter may be considered to be a general (or lumped) parameter that accounts not only for the resistance of flow at the river-aquifer boundary, but also for the effects of partial penetration of the river and other near-stream flow phenomena not included in the theoretical development of the step-response functions.Analytical step-response functions, developed for several cases of transient hydraulic interaction between a fully penetrating stream and a confined, leaky, or water-table aquifer, are used in the convolution integral to calculate aquifer heads, streambank seepage rates, and bank storage that occur in response to stream-stage fluctuations and basinwide recharge or evapotranspiration. Two computer programs developed on the basis of these step-response functions and the convolution integral are applied to the analysis of hydraulic interaction of two alluvial stream-aquifer systems. These applications demonstrate the utility of the analytical functions and computer programs for estimating aquifer and streambank seepage rates and bank storage.

Chiral alkynylcarbinols from marine sponges: asymmetric synthesis and biological relevance.

PubMed

Listunov, Dymytrii; Maraval, Valérie; Chauvin, Remi; Génisson, Yves

2015-01-01

Covering: up to March 2014. Previous review on the topic: B. W. Gung, C. R. Chim., 2009, 12, 489-505. Chiral α-functional lipidic propargylic alcohols extracted from marine sponges, in particular of the pacific genus Petrosia, constitute a class of acetylenic natural products exhibiting remarkable in vitro biological activities, especially anti-tumoral cytotoxicity. These properties, associated to functionalities that are uncommon among natural products, have prompted recent projects on asymmetric total synthesis. On the basis of a three-sector structural typology, three main sub-types of secondary alkynylcarbinols (with either alkyl, alkenyl, or alkynyl as the second substituent) can be identified as the minimal pharmacophoric units. Selected natural products containing these functionalities have been targeted using previously known or on purpose-designed procedures, where the stereo-determining step can be: (i) a C-C bond forming reaction (e.g. the Zn-mediated addition of alkynyl nucleophiles to aldehydes in the presence of chiral aminoalcohols), (ii) a functional layout (e.g. the asymmetric organo- or metallo-catalytic reduction of ynones), or (iii) an enantiomeric resolution (e.g. a lipase-mediated kinetic resolution via acetylation). The promising medicinal importance of these targets is finally surveyed, and future investigation prospects are proposed, such as: (i) further total synthesis of known or future extraction products; (ii) the synthesis of non-natural analogues, with simpler lipophilic environments of the alkynylcarbinol-based pharmacophoric units; (iii) the variation and optimization of both the pharmacophoric units and their lipophilic environment; and (iv) investigations into the biological mode of action of these unique structures.

Relationship of functional fitness with daily steps in community-dwelling older adults.

PubMed

de Melo, Lucelia Luna; Menec, Verena H; Ready, A Elizabeth

2014-01-01

Walking is the main type of physical activity among community-dwelling older adults and it is associated with various health benefits. However, there is limited evidence about the relationship between functional fitness and walking performed under independent living conditions among older adults. This study examined the relationship between functional fitness and steps walked per day among older adults, both assessed objectively, with performance-based measures accounting for the effect of age, gender, and chronic conditions. In this cross-sectional study, 60 participants aged 65 years or older (mean = 76.9 ± 7.3 years, range 65-92 years) wore pedometers for 3 consecutive days. Functional fitness was measured using the Functional Fitness Test (lower and upper body strength, endurance, lower and upper body flexibility, agility/balance). The outcome measure was the mean number of steps walked for 3 days with participants classified into tertiles: low walkers (<3000 steps), medium walkers (≥3000 < 6500 steps), and high walkers (≥6500 steps). After controlling for age, gender, and the number of chronic conditions, none of the functional fitness parameters was significantly associated with steps taken per day when comparing medium walkers with low walkers. In contrast, all functional fitness parameters, except upper body flexibility, were significantly associated with steps taken per day when comparing high walkers with low walkers. In this sample of older adults, greater functional fitness was associated only with relatively high levels of walking involving 6500 steps per day or more. It was not related to medium walking levels. The findings point to the importance of interventions to maintain or enhance functional fitness among older adults.

Fully chip-embedded automation of a multi-step lab-on-a-chip process using a modularized timer circuit.

PubMed

Kang, Junsu; Lee, Donghyeon; Heo, Young Jin; Chung, Wan Kyun

2017-11-07

For highly-integrated microfluidic systems, an actuation system is necessary to control the flow; however, the bulk of actuation devices including pumps or valves has impeded the broad application of integrated microfluidic systems. Here, we suggest a microfluidic process control method based on built-in microfluidic circuits. The circuit is composed of a fluidic timer circuit and a pneumatic logic circuit. The fluidic timer circuit is a serial connection of modularized timer units, which sequentially pass high pressure to the pneumatic logic circuit. The pneumatic logic circuit is a NOR gate array designed to control the liquid-controlling process. By using the timer circuit as a built-in signal generator, multi-step processes could be done totally inside the microchip without any external controller. The timer circuit uses only two valves per unit, and the number of process steps can be extended without limitation by adding timer units. As a demonstration, an automation chip has been designed for a six-step droplet treatment, which entails 1) loading, 2) separation, 3) reagent injection, 4) incubation, 5) clearing and 6) unloading. Each process was successfully performed for a pre-defined step-time without any external control device.

48 CFR 3036.104-90 - Authority for one-step turn-key design-build contracting for the United States Coast Guard (USCG).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 7 2014-10-01 2014-10-01 false Authority for one-step turn-key design-build contracting for the United States Coast Guard (USCG). 3036.104-90 Section 3036.104-90 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY ACQUISITION REGULATION (HSAR) SPECIAL CATEGORIES OF...

Low relative error in consumer-grade GPS units make them ideal for measuring small-scale animal movement patterns

PubMed Central

Severns, Paul M.

2015-01-01

Consumer-grade GPS units are a staple of modern field ecology, but the relatively large error radii reported by manufacturers (up to 10 m) ostensibly precludes their utility in measuring fine-scale movement of small animals such as insects. Here we demonstrate that for data collected at fine spatio-temporal scales, these devices can produce exceptionally accurate data on step-length and movement patterns of small animals. With an understanding of the properties of GPS error and how it arises, it is possible, using a simple field protocol, to use consumer grade GPS units to collect step-length data for the movement of small animals that introduces a median error as small as 11 cm. These small error rates were measured in controlled observations of real butterfly movement. Similar conclusions were reached using a ground-truth test track prepared with a field tape and compass and subsequently measured 20 times using the same methodology as the butterfly tracking. Median error in the ground-truth track was slightly higher than the field data, mostly between 20 and 30 cm, but even for the smallest ground-truth step (70 cm), this is still a signal-to-noise ratio of 3:1, and for steps of 3 m or more, the ratio is greater than 10:1. Such small errors relative to the movements being measured make these inexpensive units useful for measuring insect and other small animal movements on small to intermediate scales with budgets orders of magnitude lower than survey-grade units used in past studies. As an additional advantage, these units are simpler to operate, and insect or other small animal trackways can be collected more quickly than either survey-grade units or more traditional ruler/gird approaches. PMID:26312190

Low relative error in consumer-grade GPS units make them ideal for measuring small-scale animal movement patterns.

PubMed

Breed, Greg A; Severns, Paul M

2015-01-01

Consumer-grade GPS units are a staple of modern field ecology, but the relatively large error radii reported by manufacturers (up to 10 m) ostensibly precludes their utility in measuring fine-scale movement of small animals such as insects. Here we demonstrate that for data collected at fine spatio-temporal scales, these devices can produce exceptionally accurate data on step-length and movement patterns of small animals. With an understanding of the properties of GPS error and how it arises, it is possible, using a simple field protocol, to use consumer grade GPS units to collect step-length data for the movement of small animals that introduces a median error as small as 11 cm. These small error rates were measured in controlled observations of real butterfly movement. Similar conclusions were reached using a ground-truth test track prepared with a field tape and compass and subsequently measured 20 times using the same methodology as the butterfly tracking. Median error in the ground-truth track was slightly higher than the field data, mostly between 20 and 30 cm, but even for the smallest ground-truth step (70 cm), this is still a signal-to-noise ratio of 3:1, and for steps of 3 m or more, the ratio is greater than 10:1. Such small errors relative to the movements being measured make these inexpensive units useful for measuring insect and other small animal movements on small to intermediate scales with budgets orders of magnitude lower than survey-grade units used in past studies. As an additional advantage, these units are simpler to operate, and insect or other small animal trackways can be collected more quickly than either survey-grade units or more traditional ruler/gird approaches.

Low cost silicon solar array project silicon materials task: Establishment of the feasibility of a process capable of low-cost, high volume production of silane (step 1) and the pyrolysis of silane to semiconductor-grade silicon (step 2)

NASA Technical Reports Server (NTRS)

Breneman, W. C.; Farrier, E. G.; Rexer, J.

1977-01-01

Extended operation of a small process-development unit routinely produced high quality silane in 97+% yield from dichlorosilane. The production rate was consistent with design loadings for the fractionating column and for the redistribution reactor. A glass fluid-bed reactor was constructed for room temperature operation. The behavior of a bed of silcon particles was observed as a function of various feedstocks, component configurations, and operating conditions. For operating modes other than spouting, the bed behaved in an erratic and unstable manner. A method was developed for casting molten silicon powder into crack-free solid pellets for process evaluation. The silicon powder was melted and cast into thin walled quartz tubes that sacrificially broke on cooling.

Canada's public health system: is the pace of progress sufficient?

PubMed

Lozon, Jeffrey C; Alikhan, L Miin

2007-01-01

Tilson and Berkowitz review the Institute of Medicine reports that catalyzed the serious re-examination of the United States public health enterprise. For Canada, a similar catalyst stemmed from the lessons learned during the 2003 severe acute respiratory syndrome outbreak. While strong policy statements of commitment to strengthen the public health system are a necessary first step to stewarding change, they are insufficient without defined accountabilities, operationalized relationships and supporting legislation. Investments in critical enablers of sustainable reform, such as inter-sectoral partnerships, human capacity building and an electronic backbone, are also required. To support the value added by public health functions and services, both from a health benefit and economic perspective, a performance management system is necessary. While the 2004 establishment of the Public Health Agency of Canada was a progressive step, persistent political will and leadership are required to ensure this agency's effectiveness and preparedness before the next crisis hits.

Combined quality function deployment and logical framework analysis to improve quality of emergency care in Malta.

PubMed

Buttigieg, Sandra Catherine; Dey, Prasanta Kumar; Cassar, Mary Rose

2016-01-01

The purpose of this paper is to develop an integrated patient-focused analytical framework to improve quality of care in accident and emergency (A & E) unit of a Maltese hospital. The study adopts a case study approach. First, a thorough literature review has been undertaken to study the various methods of healthcare quality management. Second, a healthcare quality management framework is developed using combined quality function deployment (QFD) and logical framework approach (LFA). Third, the proposed framework is applied to a Maltese hospital to demonstrate its effectiveness. The proposed framework has six steps, commencing with identifying patients' requirements and concluding with implementing improvement projects. All the steps have been undertaken with the involvement of the concerned stakeholders in the A & E unit of the hospital. The major and related problems being faced by the hospital under study were overcrowding at A & E and shortage of beds, respectively. The combined framework ensures better A & E services and patient flow. QFD identifies and analyses the issues and challenges of A & E and LFA helps develop project plans for healthcare quality improvement. The important outcomes of implementing the proposed quality improvement programme are fewer hospital admissions, faster patient flow, expert triage and shorter waiting times at the A & E unit. Increased emergency consultant cover and faster first significant medical encounter were required to start addressing the problems effectively. Overall, the combined QFD and LFA method is effective to address quality of care in A & E unit. PRACTICAL/IMPLICATIONS: The proposed framework can be easily integrated within any healthcare unit, as well as within entire healthcare systems, due to its flexible and user-friendly approach. It could be part of Six Sigma and other quality initiatives. Although QFD has been extensively deployed in healthcare setup to improve quality of care, very little has been researched on combining QFD and LFA in order to identify issues, prioritise them, derive improvement measures and implement improvement projects. Additionally, there is no research on QFD application in A & E. This paper bridges these gaps. Moreover, very little has been written on the Maltese health care system. Therefore, this study contributes demonstration of quality of emergency care in Malta.

Mechanism and kinetics for ammonium dinitramide (ADN) sublimation: a first-principles study.

PubMed

Zhu, R S; Chen, Hui-Lung; Lin, M C

2012-11-08

The mechanism for sublimation of NH(4)N(NO(2))(2) (ADN) has been investigated quantum-mechanically with generalized gradient approximation plane-wave density functional theory calculations; the solid surface is represented by a slab model and the periodic boundary conditions are applied. The calculated lattice constants for the bulk ADN, which were found to consist of NH(4)(+)[ON(O)NNO(2)](-) units, instead of NH(4)(+)[N(NO(2))(2)](-), agree quite well with experimental values. Results show that three steps are involved in the sublimation/decomposition of ADN. The first step is the relaxation of the surface layer with 1.6 kcal/mol energy per NH(4)ON(O)NNO(2) unit; the second step is the sublimation of the surface layer to form a molecular [NH(3)]-[HON(O)NNO(2)] complex with a 29.4 kcal/mol sublimation energy, consistent with the experimental observation of Korobeinichev et al. (10) The last step is the dissociation of the [H(3)N]-[HON(O)NNO(2)] complex to give NH(3) and HON(O)NNO(2) with the dissociation energy of 13.9 kcal/mol. Direct formation of NO(2) (g) from solid ADN costs a much higher energy, 58.3 kcal/mol. Our calculated total sublimation enthalpy for ADN(s) → NH(3)(g) + HON(O)NNO(2)) (g), 44.9 kcal/mol via three steps, is in good agreement with the value, 42.1 kcal/mol predicted for the one-step sublimation process in this work and the value 44.0 kcal/mol computed by Politzer et al. (11) using experimental thermochemical data. The sublimation rate constant for the rate-controlling step 2 can be represented as k(sub) = 2.18 × 10(12) exp (-30.5 kcal/mol/RT) s(-1), which agrees well with available experimental data within the temperature range studied. The high pressure limit decomposition rate constant for the molecular complex H(3)N···HON(O)NNO(2) can be expressed by k(dec) = 3.18 × 10(13) exp (-15.09 kcal/mol/RT) s(-1). In addition, water molecules were found to increase the sublimation enthalpy of ADN, contrary to that found in the ammonium perchlorate system, in which water molecules were shown to reduce pronouncedly the enthalpy of sublimation.

Design, Planning and Management of the Hospital Custody Unit at Hospital Universitario Fundación Alcorcón.

PubMed

Fuente-Martín, C de la; Fuente Martín, B de la; Grifol-Clar, E

2017-12-01

The design and management of a Hospital Custody Unit at Hospital Universitario Fundación Alcorcón, to focus the aim of this study on specialized medical care for extra-penitentiary patients who have suffered from a disease. We are building a new space to facilitate their daily lives at hospital and we want to offer a double function to the patients that consists of a custody space and a health rehabilitation space. We carried out a scientific literature search on the international and national databases, about Hospital Custody Units or Restricted Access Units. The language of the reviews that we checked was English and Spanish. We wrote the Action Guide of the Hospital Custody Unit for the design, planning and management of the Hospital Custody Unit at Hospital Universitario Fundación Alcorcón. (We included complementary bibliographic material and the Quick Guide in the Unit). The Hospital Custody Unit will be compatible with medical activity, occupational safety and the custody of patients that are in prison. We thus require consensus with police departments about custody protocols along with assistance from the clinicians' teams at penitentiary centers and referral hospitals. Furthermore, it is important to step up special care for mental health and to promote telemedicine and new technologies to streamline medical care along with coordination with healthcare professionals.

Comparing clinical and demographic characteristics of people with mental illness in hospital- and community-based residential rehabilitation units in Queensland.

PubMed

Meehan, Tom; Stedman, Terry; Parker, Stephen; Curtis, Bretine; Jones, Donna

2017-05-01

Objective The aim of the present study was to examine care pathways and characteristics of mental health consumers participating in both hospital- and community-based residential rehabilitation programs. Methods An audit of consumers (n=240) in all publicly funded residential rehabilitation units in Queensland was performed on the same day in 2013. Data collection focused on demographic characteristics, clinical information and measures of consumer functioning. Results Significant differences emerged for consumers in community- and hospital-based services with regard to age, length of stay, functioning, Mental Health Act status, guardianship status, family contact and risk of violence. Consumers in hospital-based programs have more severe and complex problems. Conclusions Consumers in residential rehabilitation units have high levels of disability, poor physical health and high levels of vulnerability. Nonetheless, it is likely that a sizeable proportion of consumers occupying rehabilitation beds in Queensland could be discharged if more 'step-down' options to move patients on were available. What is known about the topic? A small subgroup of people with severe and complex mental health problems is likely to require time in a residential rehabilitation program. This group is characterised by failure to respond to treatment, severe negative symptoms and some degree of cognitive impairment. What does this paper add? Patients currently occupying residential rehabilitation beds in Queensland have high levels of disability, poor physical health and high levels of vulnerability. Patients in hospital-based programs are more severely disabled than those in community-based programs. What are the implications for practitioners? It is likely that a sizeable proportion of patients occupying rehabilitation beds in Queensland could be discharged if more 'step-down' options were available. Future planning initiatives need to focus on developing a greater array of community support options to facilitate the discharge of people from residential services.

mizuRoute version 1: A river network routing tool for a continental domain water resources applications

USGS Publications Warehouse

Mizukami, Naoki; Clark, Martyn P.; Sampson, Kevin; Nijssen, Bart; Mao, Yixin; McMillan, Hilary; Viger, Roland; Markstrom, Steven; Hay, Lauren E.; Woods, Ross; Arnold, Jeffrey R.; Brekke, Levi D.

2016-01-01

This paper describes the first version of a stand-alone runoff routing tool, mizuRoute. The mizuRoute tool post-processes runoff outputs from any distributed hydrologic model or land surface model to produce spatially distributed streamflow at various spatial scales from headwater basins to continental-wide river systems. The tool can utilize both traditional grid-based river network and vector-based river network data. Both types of river network include river segment lines and the associated drainage basin polygons, but the vector-based river network can represent finer-scale river lines than the grid-based network. Streamflow estimates at any desired location in the river network can be easily extracted from the output of mizuRoute. The routing process is simulated as two separate steps. First, hillslope routing is performed with a gamma-distribution-based unit-hydrograph to transport runoff from a hillslope to a catchment outlet. The second step is river channel routing, which is performed with one of two routing scheme options: (1) a kinematic wave tracking (KWT) routing procedure; and (2) an impulse response function – unit-hydrograph (IRF-UH) routing procedure. The mizuRoute tool also includes scripts (python, NetCDF operators) to pre-process spatial river network data. This paper demonstrates mizuRoute's capabilities to produce spatially distributed streamflow simulations based on river networks from the United States Geological Survey (USGS) Geospatial Fabric (GF) data set in which over 54 000 river segments and their contributing areas are mapped across the contiguous United States (CONUS). A brief analysis of model parameter sensitivity is also provided. The mizuRoute tool can assist model-based water resources assessments including studies of the impacts of climate change on streamflow.

The Relationship Between Family Functioning and Adolescent Depressive Symptoms: The Role of Emotional Clarity.

PubMed

Freed, Rachel D; Rubenstein, Liza M; Daryanani, Issar; Olino, Thomas M; Alloy, Lauren B

2016-03-01

Emotion regulation has been implicated in the etiology of depression. A first step in adaptive emotion regulation involves emotional clarity, the ability to recognize and differentiate one's emotional experience. As family members are critical in facilitating emotional understanding and communication, we examined the impact of family functioning on adolescent emotional clarity and depressive symptoms. We followed 364 adolescents (ages 14-17; 52.5% female; 51.4 % Caucasian, 48.6% African American) and their mothers over 2 years (3 time points) and assessed emotional clarity, depressive symptoms, and adolescents' and mothers' reports of family functioning. Emotional clarity mediated the relationship between adolescents' reports of family functioning and depressive symptoms at all time points cross-sectionally, and according to mothers' reports of family functioning at Time 1 only. There was no evidence of longitudinal mediation for adolescents' or mothers' reports of family functioning. Thus, family functioning, emotional clarity, and depressive symptoms are strongly related constructs during various time points in adolescence, which has important implications for intervention, especially within the family unit.

The Relationship between Family Functioning and Adolescent Depressive Symptoms: The Role of Emotional Clarity

PubMed Central

Freed, Rachel D.; Rubenstein, Liza M.; Daryanani, Issar; Olino, Thomas M.; Alloy, Lauren B.

2016-01-01

Emotion regulation has been implicated in the etiology of depression. A first step in adaptive emotion regulation involves emotional clarity, the ability to recognize and differentiate one’s emotional experience. As family members are critical in facilitating emotional understanding and communication, we examined the impact of family functioning on adolescent emotional clarity and depressive symptoms. We followed 364 adolescents (ages 12–17; 52.5% female; 51.4 % Caucasian, 48.6% African American) and their mothers over 2 years (3 time points) and assessed emotional clarity, depressive symptoms, and adolescent-reported and mother-reported family functioning. Emotional clarity mediated the relationship between adolescent-reported family functioning and depressive symptoms at all time points cross-sectionally, and according to mother-reported family functioning at Time 1 only. There was no evidence of longitudinal mediation for adolescent- or mother-reported family functioning. Thus, family functioning, emotional clarity, and depressive symptoms are strongly related constructs during various time points in adolescence, which has important implications for intervention, especially within the family unit. PMID:26832726

[Theory of V.A. dogiel on polymerization and oligomerization as a general integration concept].

PubMed

Makmaev, Iu V

2010-01-01

The theory of V.A. Dogiel on the significance of polymerization and ligomerization processes in the evolution of Protozoa and Metazoa is compared with the paper of I.I. Schmalhauisen (1972) on factors and steps of aromorph evolution. Dogiel's theory is considered as a general integration conception. Four steps are distinguished in the evolution of biological systems: (1) formation of morphofunctional system by units of the lower structural level, (2) polymerization of morphofunctional units of a system, (3) oligomerization of morphofunctional units of system by means of their reduction, uniting, or differentiation, (4) integration and stabilization of a system owing to development of morphofunctional connections between its parts.

Closure to "Estimated Splash and Training Wall Height Requirements for Stepped Chutes Applied to Embankment Dams" by Sherry L. Hunt and Kem C. Kadavy

USDA-ARS?s Scientific Manuscript database

Researchers from Hohai University in Nanjing, China compared stepped chute research conducted in physical models of narrow stepped chutes to research conducted by scientists at the USDA-ARS Hydraulic Engineering Research Unit (HERU) in a physical model of a wide stepped chute. Researchers from Hoha...

Charge delocalization characteristics of regioregular high mobility polymers

DOE PAGES

Coughlin, J. E.; Zhugayevych, A.; Wang, M.; ...

2017-01-01

Controlling the regioregularity among the structural units of narrow bandgap conjugated polymer backbones has led to improvements in optoelectronic properties, for example in the mobilities observed in field effect transistor devices. To investigate how the regioregularity affects quantities relevant to hole transport, regioregular and regiorandom oligomers representative of polymeric structures were studied using density functional theory. Several structural and electronic characteristics of the oligomers were compared, including chain planarity, cation spin density, excess charges on molecular units and internal reorganizational energy. The main difference between the regioregular and regiorandom oligomers is found to be the conjugated backbone planarity, while themore » reorganizational energies calculated are quite similar across the molecular family. Lastly, this work constitutes the first step on understanding the complex interplay of atomistic changes and an oligomer backbone structure toward modeling the charge transport properties.« less

Monitoring system and methods for a distributed and recoverable digital control system

NASA Technical Reports Server (NTRS)

Stange, Kent (Inventor); Hess, Richard (Inventor); Kelley, Gerald B (Inventor); Rogers, Randy (Inventor)

2010-01-01

A monitoring system and methods are provided for a distributed and recoverable digital control system. The monitoring system generally comprises two independent monitoring planes within the control system. The first monitoring plane is internal to the computing units in the control system, and the second monitoring plane is external to the computing units. The internal first monitoring plane includes two in-line monitors. The first internal monitor is a self-checking, lock-step-processing monitor with integrated rapid recovery capability. The second internal monitor includes one or more reasonableness monitors, which compare actual effector position with commanded effector position. The external second monitor plane includes two monitors. The first external monitor includes a pre-recovery computing monitor, and the second external monitor includes a post recovery computing monitor. Various methods for implementing the monitoring functions are also disclosed.

Method and apparatus for single-stepping coherence events in a multiprocessor system under software control

DOEpatents

Blumrich, Matthias A.; Salapura, Valentina

2010-11-02

An apparatus and method are disclosed for single-stepping coherence events in a multiprocessor system under software control in order to monitor the behavior of a memory coherence mechanism. Single-stepping coherence events in a multiprocessor system is made possible by adding one or more step registers. By accessing these step registers, one or more coherence requests are processed by the multiprocessor system. The step registers determine if the snoop unit will operate by proceeding in a normal execution mode, or operate in a single-step mode.

Asymptotics of bivariate generating functions with algebraic singularities

NASA Astrophysics Data System (ADS)

Greenwood, Torin

Flajolet and Odlyzko (1990) derived asymptotic formulae the coefficients of a class of uni- variate generating functions with algebraic singularities. Gao and Richmond (1992) and Hwang (1996, 1998) extended these results to classes of multivariate generating functions, in both cases by reducing to the univariate case. Pemantle and Wilson (2013) outlined new multivariate ana- lytic techniques and used them to analyze the coefficients of rational generating functions. After overviewing these methods, we use them to find asymptotic formulae for the coefficients of a broad class of bivariate generating functions with algebraic singularities. Beginning with the Cauchy integral formula, we explicity deform the contour of integration so that it hugs a set of critical points. The asymptotic contribution to the integral comes from analyzing the integrand near these points, leading to explicit asymptotic formulae. Next, we use this formula to analyze an example from current research. In the following chapter, we apply multivariate analytic techniques to quan- tum walks. Bressler and Pemantle (2007) found a (d + 1)-dimensional rational generating function whose coefficients described the amplitude of a particle at a position in the integer lattice after n steps. Here, the minimal critical points form a curve on the (d + 1)-dimensional unit torus. We find asymptotic formulae for the amplitude of a particle in a given position, normalized by the number of steps n, as n approaches infinity. Each critical point contributes to the asymptotics for a specific normalized position. Using Groebner bases in Maple again, we compute the explicit locations of peak amplitudes. In a scaling window of size the square root of n near the peaks, each amplitude is asymptotic to an Airy function.

10 CFR Appendix A to Subpart U of... - Sampling Plan for Enforcement Testing of Electric Motors

Code of Federal Regulations, 2013 CFR

2013-01-01

....010 is based on a 20 percent tolerance in the total power loss at full-load and fixed output power... measured full-load efficiency of unit i. Step 3. Compute the sample standard deviation (S1) of the measured full-load efficiency of the n1 units in the first sample as follows: ER83AD04.006 Step 4. Compute the...

10 CFR Appendix A to Subpart U of... - Sampling Plan for Enforcement Testing of Electric Motors

Code of Federal Regulations, 2014 CFR

2014-01-01

....010 is based on a 20 percent tolerance in the total power loss at full-load and fixed output power... measured full-load efficiency of unit i. Step 3. Compute the sample standard deviation (S1) of the measured full-load efficiency of the n1 units in the first sample as follows: ER83AD04.006 Step 4. Compute the...

10 CFR Appendix A to Subpart U of... - Sampling Plan for Enforcement Testing of Electric Motors

Code of Federal Regulations, 2012 CFR

2012-01-01

....010 is based on a 20 percent tolerance in the total power loss at full-load and fixed output power... measured full-load efficiency of unit i. Step 3. Compute the sample standard deviation (S1) of the measured full-load efficiency of the n1 units in the first sample as follows: ER83AD04.006 Step 4. Compute the...

A simplified bioprocess for human alpha-fetoprotein production from inclusion bodies.

PubMed

Leong, Susanna S J; Middelberg, Anton P J

2007-05-01

A simple and effective Escherichia coli (E. coli) bioprocess is demonstrated for the preparation of recombinant human alpha-fetoprotein (rhAFP), a pharmaceutically promising protein that has important immunomodulatory functions. The new rhAFP process employs only unit operations that are easy to scale and validate, and reduces the complexity embedded in existing inclusion body processing methods. A key requirement in the establishment of this process was the attainment of high purity rhAFP prior to protein refolding because (i) rhAFP binds easily to hydrophobic contaminants once refolded, and (ii) rhAFP aggregates during renaturation, in a contaminant- dependent way. In this work, direct protein extraction from cell suspension was coupled with a DNA precipitation-centrifugation step prior to purification using two simple chromatographic steps. Refolding was conducted using a single-step, redox-optimized dilution refolding protocol, with refolding success determined by reversed phase HPLC analysis, ELISA, and circular dichroism spectroscopy. Quantitation of DNA and protein contaminant loads after each unit operation showed that contaminant levels were reduced to levels comparable to traditional flowsheets. Protein microchemical modification due to carbamylation in this urea-based process was identified and minimized, yielding a final refolded and purified product that was significantly purified from carbamylated variants. Importantly, this work conclusively demonstrates, for the first time, that a chemical extraction process can substitute the more complex traditional inclusion body processing flowsheet, without compromising product purity and yield. This highly intensified and simplified process is expected to be of general utility for the preparation of other therapeutic candidates expressed as inclusion bodies. (c) 2006 Wiley Periodicals, Inc.

Amination of activated carbon for enhancing phenol adsorption: Effect of nitrogen-containing functional groups

NASA Astrophysics Data System (ADS)

Yang, Guo; Chen, Honglin; Qin, Hangdao; Feng, Yujun

2014-02-01

To study the contribution of different nitrogen-containing functional groups to enhancement of phenol adsorption, the aminated activated carbons (AC) were characterized by N2 adsorption/desorption, XPS, Boehm titration, and pH drift method and tested for adsorption behaviors of phenol. Adsorption isotherm fitting revealed that the Langmuir model was preferred for the aminated ACs. The adsorption capacity per unit surface area (qm/SSABET) was linearly correlated with the amount of pyridinic and pyrrolic N, which suggested that these two functional groups played a critical role in phenol adsorption. The enhancement of adsorption capacity was attributed to the strengthened π-π dispersion between phenol and basal plane of AC by pyridinic, pyrrolic N. The adsorption kinetics was found to follow the pseudo-second-order kinetic model, and intraparticle diffusion was one of the rate-controlling steps in the adsorption process.

Influence of retainer design on two-unit cantilever resin-bonded glass fiber reinforced composite fixed dental prostheses: an in vitro and finite element analysis study.

PubMed

Keulemans, Filip; De Jager, Niek; Kleverlaan, Cornelis J; Feilzer, Albert J

2008-10-01

The aim of this study was to evaluate in vitro the influence of retainer design on the strength of two-unit cantilever resin-bonded glass fiber-reinforced composite (FRC) fixed dental prostheses (FDP). Four retainer designs were tested: a proximal box, a step-box, a dual wing, and a step-box-wing. Of each design on 8 human mandibular molars, FRC-FDPs of a premolar size were produced. The FRC framework was made of resin impregnated unidirectional glass fibers (Estenia C&B EG Fiber, Kuraray) and veneered with hybrid resin composite (Estenia C&B, Kuraray). Panavia F 2.0 (Kuraray) was used as resin luting cement. FRC-FDPs were loaded to failure in a universal testing machine. One-way ANOVA and Tukey's post-hoc test were used to evaluate the data. The four designs were analyzed with finite element analysis (FEA) to reveal the stress distribution within the tooth/restoration complex. Significantly lower fracture strengths were observed with inlay-retained FDPs (proximal box: 300 +/- 65 N; step-box: 309 +/- 37 N) compared to wing-retained FDPs (p < 0.05) (step-box-wing: 662 +/- 99 N; dual wing: 697 +/- 67 N). Proximal-box-, step-box-, and step-box-wing-retained FDPs mainly failed with catastrophic cusp fracture (proximal box 100%, step-box 100%, and step-box-wing 75%), while dual-wing-retained FDPs mainly failed at the adhesive interface and/or due to pontic failure (75%). FEA showed more favorable stress distributions within the tooth/restoration complex for dual wing retainers. A dual-wing retainer is the optimal design for replacement of a single premolar by means of a two-unit cantilever FRC-FDPs.

Unobtrusive monitoring of heart rate using a cost-effective speckle-based SI-POF remote sensor

NASA Astrophysics Data System (ADS)

Pinzón, P. J.; Montero, D. S.; Tapetado, A.; Vázquez, C.

2017-03-01

A novel speckle-based sensing technique for cost-effective heart-rate monitoring is demonstrated. This technique detects periodical changes in the spatial distribution of energy on the speckle pattern at the output of a Step-Index Polymer Optical Fiber (SI-POF) lead by using a low-cost webcam. The scheme operates in reflective configuration thus performing a centralized interrogation unit scheme. The prototype has been integrated into a mattress and its functionality has been tested with 5 different patients lying on the mattress in different positions without direct contact with the fiber sensing lead.

A Step Closer to Membrane Protein Multiplexed Nanoarrays Using Biotin-Doped Polypyrrole

PubMed Central

2015-01-01

Whether for fundamental biological research or for diagnostic and drug discovery applications, protein micro- and nanoarrays are attractive technologies because of their low sample consumption, high-throughput, and multiplexing capabilities. However, the arraying platforms developed so far are still not able to handle membrane proteins, and specific methods to selectively immobilize these hydrophobic and fragile molecules are needed to understand their function and structural complexity. Here we integrate two technologies, electropolymerization and amphipols, to demonstrate the electrically addressable functionalization of micro- and nanosurfaces with membrane proteins. Gold surfaces are selectively modified by electrogeneration of a polymeric film in the presence of biotin, where avidin conjugates can then be selectively immobilized. The method is successfully applied to the preparation of protein-multiplexed arrays by sequential electropolymerization and biomolecular functionalization steps. The surface density of the proteins bound to the electrodes can be easily tuned by adjusting the amount of biotin deposited during electropolymerization. Amphipols are specially designed amphipathic polymers that provide a straightforward method to stabilize and add functionalities to membrane proteins. Exploiting the strong affinity of biotin for streptavidin, we anchor distinct membrane proteins onto different electrodes via a biotin-tagged amphipol. Antibody-recognition events demonstrate that the proteins are stably immobilized and that the electrodeposition of polypyrrole films bearing biotin units is compatible with the protein-binding activity. Since polypyrrole films show good conductivity properties, the platform described here is particularly well suited to prepare electronically transduced bionanosensors. PMID:24476392

Correlation of United States Medical Licensing Examination and Internal Medicine In-Training Examination performance.

PubMed

Perez, Jose A; Greer, Sharon

2009-12-01

The Internal Medicine In-Training Examination (ITE) is administered during residency training in the United States as a self-assessment and program assessment tool. Performance on this exam correlates with outcome on the American Board of Internal Medicine Certifying examination. Internal Medicine Program Directors use the United States Medical Licensing Examination (USMLE) to make decisions in recruitment of potential applicants. This study was done to determine a correlation of USMLE Steps 1, 2 and 3 results with ITE scores in each level of Internal Medicine training. A retrospective review of all residents graduating from an Internal Medicine program from 1999 to 2006 was done. Subjects included had data for all USMLE Steps and ITE during all years of training. Thirty-one subjects were included in the study. Correlations of USMLE Steps 1, 2 and 3 were done with ITE scores (percent correct) in each year of training. Pearson's correlation coefficient (r) was determined for each pairing and a t test to determine statistical significance of the correlation was done. Statistical significance was defined as P value <0.05. The r values for USMLE Step 1 and ITE percent correct in PGY I, II and III were 0.46, 0.55 and 0.51 respectively. Corresponding r values for USMLE Step 2 and ITE percent correct were 0.79, 0.70 and 0.72; for USMLE Step 3 these values were 0.51, 0.37 and 0.51 respectively for each training year. USMLE scores are correlated with ITE scores. This correlation was strongest for USMLE Step 2.

30 CFR 250.1156 - What steps must I take to receive approval to produce within 500 feet of a unit or lease line?

Code of Federal Regulations, 2011 CFR

2011-07-01

... produce within 500 feet of a unit or lease line? 250.1156 Section 250.1156 Mineral Resources BUREAU OF... Prior to Production § 250.1156 What steps must I take to receive approval to produce within 500 feet of... producing from a reservoir within a well that has any portion of the completed interval less than 500 feet...

General Metal Trades Book I. Units of Instruction. Teacher's Guide.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This teacher's guide provides instructional materials for a 10-unit course in the General Metal Trades program. Each unit includes most or all of these basic components: performance objectives (unit and specific objectives), suggested teaching activities (a sheet outlining steps to follow to accomplish specific objectives), information sheets,…

Model development of production management unit to enhance entrepreneurship attitude of vocational school students from fashion department

NASA Astrophysics Data System (ADS)

Sumaryani, Sri

2018-03-01

The purpose of this study is to develop a model of production management unit to enhance entrepreneurship attitude of vocational school students from fashion department. This study concerns in developing students' entrepreneurship attitude in management which includes planning, organizing, applying and evaluation. The study uses Research and Development (R & D) approach with three main steps; preliminary study, development step, and product validation. Research subject was vocational school teachers from fashion department in Semarang, Salatiga and Demak. This study yields a development model of production management unit that could enhance vocational school students' entrepreneurship attitude in fashion department. The result shows that research subjects have understood about of production management unit in Vocational School (SMK).

Ads' click-through rates predicting based on gated recurrent unit neural networks

NASA Astrophysics Data System (ADS)

Chen, Qiaohong; Guo, Zixuan; Dong, Wen; Jin, Lingzi

2018-05-01

In order to improve the effect of online advertising and to increase the revenue of advertising, the gated recurrent unit neural networks(GRU) model is used as the ads' click through rates(CTR) predicting. Combined with the characteristics of gated unit structure and the unique of time sequence in data, using BPTT algorithm to train the model. Furthermore, by optimizing the step length algorithm of the gated unit recurrent neural networks, making the model reach optimal point better and faster in less iterative rounds. The experiment results show that the model based on the gated recurrent unit neural networks and its optimization of step length algorithm has the better effect on the ads' CTR predicting, which helps advertisers, media and audience achieve a win-win and mutually beneficial situation in Three-Side Game.

Why Not Wait? Eight Institutions Share Their Experiences Moving United States Medical Licensing Examination Step 1 After Core Clinical Clerkships.

PubMed

Daniel, Michelle; Fleming, Amy; Grochowski, Colleen O'Conner; Harnik, Vicky; Klimstra, Sibel; Morrison, Gail; Pock, Arnyce; Schwartz, Michael L; Santen, Sally

2017-11-01

The majority of medical students complete the United States Medical Licensing Examination Step 1 after their foundational sciences; however, there are compelling reasons to examine this practice. This article provides the perspectives of eight MD-granting medical schools that have moved Step 1 after the core clerkships, describing their rationale, logistics of the change, outcomes, and lessons learned. The primary reasons these institutions cite for moving Step 1 after clerkships are to foster more enduring and integrated basic science learning connected to clinical care and to better prepare students for the increasingly clinical focus of Step 1. Each school provides key features of the preclerkship and clinical curricula and details concerning taking Steps 1 and 2, to allow other schools contemplating change to understand the landscape. Most schools report an increase in aggregate Step 1 scores after the change. Despite early positive outcomes, there may be unintended consequences to later scheduling of Step 1, including relatively late student reevaluations of their career choice if Step 1 scores are not competitive in the specialty area of their choice. The score increases should be interpreted with caution: These schools may not be representative with regard to mean Step 1 scores and failure rates. Other aspects of curricular transformation and rising national Step 1 scores confound the data. Although the optimal timing of Step 1 has yet to be determined, this article summarizes the perspectives of eight schools that changed Step 1 timing, filling a gap in the literature on this important topic.

Functional-to-form mapping for assembly design automation

NASA Astrophysics Data System (ADS)

Xu, Z. G.; Liu, W. M.; Shen, W. D.; Yang, D. Y.; Liu, T. T.

2017-11-01

Assembly-level function-to-form mapping is the most effective procedure towards design automation. The research work mainly includes: the assembly-level function definitions, product network model and the two-step mapping mechanisms. The function-to-form mapping is divided into two steps, i.e. mapping of function-to-behavior, called the first-step mapping, and the second-step mapping, i.e. mapping of behavior-to-structure. After the first step mapping, the three dimensional transmission chain (or 3D sketch) is studied, and the feasible design computing tools are developed. The mapping procedure is relatively easy to be implemented interactively, but, it is quite difficult to finish it automatically. So manual, semi-automatic, automatic and interactive modification of the mapping model are studied. A mechanical hand F-F mapping process is illustrated to verify the design methodologies.

Monitor unit settings for intensity modulated beams delivered using a step-and-shoot approach.

PubMed

Sharpe, M B; Miller, B M; Yan, D; Wong, J W

2000-12-01

Two linear accelerators have been commissioned for delivering IMRT treatments using a step-and-shoot approach. To assess beam startup stability for 6 and 18 MV x-ray beams, dose delivered per monitor unit (MU), beam flatness, and beam symmetry were measured as a function of the total number of MU delivered at a clinical dose rate of 400 MU per minute. Relative to a 100 MU exposure, the dose delivered per MU by both linear accelerators was found to be within +/-2% for exposures larger than 4 MU. Beam flatness and symmetry also met accepted quality assurance standards for a minimum exposure of 4 MU. We have found that the performance of the two machines under study is well suited to the delivery of step-and-shoot IMRT. A system of dose calculation has also been commissioned for applying head scatter corrections to fields as small as 1x1 cm2. The accuracy and precision of the relative output calculations in water was validated for small fields and fields offset from the axis of collimator rotation. For both 6 and 18 MV x-ray beams, the dose per MU calculated in a water phantom agrees with measured data to within 1% on average, with a maximum deviation of 2.5%. The largest output factor discrepancies were seen when the actual radiation field size deviated from the set field size. The measured output in water can vary by as much 16% for 1x1 cm2 fields, when the measured field size deviates from the set field size by 2 mm. For a 1 mm deviation, this discrepancy was reduced to 8%. Steps should be taken to ensure collimator precision is tightly controlled when using such small fields. If this is not possible, very small fields should not contribute to a significant portion of the treatment, or uncertainties in the collimator position may effect the accuracy of the dose delivered.

Event-triggered logical flow control for comprehensive process integration of multi-step assays on centrifugal microfluidic platforms.

PubMed

Kinahan, David J; Kearney, Sinéad M; Dimov, Nikolay; Glynn, Macdara T; Ducrée, Jens

2014-07-07

The centrifugal "lab-on-a-disc" concept has proven to have great potential for process integration of bioanalytical assays, in particular where ease-of-use, ruggedness, portability, fast turn-around time and cost efficiency are of paramount importance. Yet, as all liquids residing on the disc are exposed to the same centrifugal field, an inherent challenge of these systems remains the automation of multi-step, multi-liquid sample processing and subsequent detection. In order to orchestrate the underlying bioanalytical protocols, an ample palette of rotationally and externally actuated valving schemes has been developed. While excelling with the level of flow control, externally actuated valves require interaction with peripheral instrumentation, thus compromising the conceptual simplicity of the centrifugal platform. In turn, for rotationally controlled schemes, such as common capillary burst valves, typical manufacturing tolerances tend to limit the number of consecutive laboratory unit operations (LUOs) that can be automated on a single disc. In this paper, a major advancement on recently established dissolvable film (DF) valving is presented; for the very first time, a liquid handling sequence can be controlled in response to completion of preceding liquid transfer event, i.e. completely independent of external stimulus or changes in speed of disc rotation. The basic, event-triggered valve configuration is further adapted to leverage conditional, large-scale process integration. First, we demonstrate a fluidic network on a disc encompassing 10 discrete valving steps including logical relationships such as an AND-conditional as well as serial and parallel flow control. Then we present a disc which is capable of implementing common laboratory unit operations such as metering and selective routing of flows. Finally, as a pilot study, these functions are integrated on a single disc to automate a common, multi-step lab protocol for the extraction of total RNA from mammalian cell homogenate.

A National Cohort Study of U.S. Medical School Students Who Initially Failed Step 1 of the United States Medical Licensing Examination

PubMed Central

Andriole, Dorothy A.; Jeffe, Donna B.

2012-01-01

Purpose To describe educational outcomes for a national cohort of U.S. medical students who initially failed Step 1 of the United States Medical Licensing Examination Method The authors analyzed de-identified, individualized records for the 1993–2000 cohort of U.S. medical school matriculants who both initially failed Step l and were no longer in medical school as of March 2, 2009, using multivariable logistic regression to identify factors associated with attempting, and initially passing, Step 2 Clinical Knowledge (CK). Results Of 6,594 students who failed Step l, 5,985 (90.8%) took Step 2CK. Women and Asian/Pacific Islander students were more likely to attempt Step 2CK; more recent matriculants and students with lower failing Step 1 scores were less likely. Of the 5,985 students who attempted Step 2CK, 4,168 (69.6%) initially passed. Women, students with higher Medical College Admission Test scores, and more recent matriculants were more likely to pass Step 2CK; Asian/Pacific Islander students, underrepresented minority students, older students, and students with lower failing Step 1 scores were less likely. Ninety percent of students in the study sample (5,952/6,594) ultimately graduated from medical school, including 99.5% (4,148/4,168) of those who initially passed, 96.7% (1,757/1,817) of those who initially failed, and 7.7% (47/609) of those who never attempted Step 2CK. Conclusions The authors identified variables associated with educational outcomes among students who failed Step l. These findings can inform medical schools’ efforts to develop tailored interventions to maximize the likelihood that students will take Step 2CK and pass it on the first attempt. PMID:22361789

Toward a conceptual approach for assessing risks from chemical mixtures and other stressors to coastal ecosystem services.

PubMed

Syberg, Kristian; Backhaus, Thomas; Banta, Gary; Bruce, Peter; Gustavsson, Mikael; Munns, Wayne R; Rämö, Robert; Selck, Henriette; Gunnarsson, Jonas S

2017-03-01

Growth of human populations and increased human activity, particularly in coastal areas, increase pressure on coastal ecosystems and the ecosystem services (ES) they provide. As a means toward being able to assess the impact of multiple stressors on ES, in the present study we propose an 8-step conceptual approach for assessing effects of chemical mixtures and other stressors on ES in coastal areas: step A, identify the relevant problems and policy aims; step B, identify temporal and spatial boundaries; step C, identify relevant ES; step D, identify relevant stressors (e.g., chemicals); step E, translate impacts into ES units; step F, assess cumulative risk in ES units; step G, rank stressors based on their contribution to adverse effects on ES; and step H, implement regulation and management as appropriate and necessary. Two illustrative case studies (Swedish coastal waters and a coastal lagoon in Costa Rica) are provided; one focuses on chemicals that affect human food supply and the other addresses pesticide runoff and trade-offs among ES. The 2 cases are used to highlight challenges of such risk assessments, including use of standardized versus ES-relevant test species, data completeness, and trade-offs among ES. Lessons learned from the 2 case studies are discussed in relation to environmental risk assessment and management of chemical mixtures. Integr Environ Assess Manag 2017;13:376-386. © 2016 SETAC. © 2016 SETAC.

Compiling standardized information from clinical practice: using content analysis and ICF Linking Rules in a goal-oriented youth rehabilitation program.

PubMed

Lustenberger, Nadia A; Prodinger, Birgit; Dorjbal, Delgerjargal; Rubinelli, Sara; Schmitt, Klaus; Scheel-Sailer, Anke

2017-09-23

To illustrate how routinely written narrative admission and discharge reports of a rehabilitation program for eight youths with chronic neurological health conditions can be transformed to the International Classification of Functioning, Disability and Health. First, a qualitative content analysis was conducted by building meaningful units with text segments assigned of the reports to the five elements of the Rehab-Cycle ® : goal; assessment; assignment; intervention; evaluation. Second, the meaningful units were then linked to the ICF using the refined ICF Linking Rules. With the first step of transformation, the emphasis of the narrative reports changed to a process oriented interdisciplinary layout, revealing three thematic blocks of goals: mobility, self-care, mental, and social functions. The linked 95 unique ICF codes could be grouped in clinically meaningful goal-centered ICF codes. Between the two independent linkers, the agreement rate was improved after complementing the rules with additional agreements. The ICF Linking Rules can be used to compile standardized health information from narrative reports if prior structured. The process requires time and expertise. To implement the ICF into common practice, the findings provide the starting point for reporting rehabilitation that builds upon existing practice and adheres to international standards. Implications for Rehabilitation This study provides evidence that routinely collected health information from rehabilitation practice can be transformed to the International Classification of Functioning, Disability and Health by using the "ICF Linking Rules", however, this requires time and expertise. The Rehab-Cycle ® , including assessments, assignments, goal setting, interventions and goal evaluation, serves as feasible framework for structuring this rehabilitation program and ensures that the complexity of local practice is appropriately reflected. The refined "ICF Linking Rules" lead to a standardized transformation process of narrative text and thus a higher quality with increased transparency. As a next step, the resulting format of goal codes supplemented by goal-clarifying codes could be validated to strengthen the implementation of the International Classification of Functioning, Disability and Health into rehabilitation routine by respecting the variety of clinical practice.

Quantification of regenerative potential in primary human mammary epithelial cells

PubMed Central

Linnemann, Jelena R.; Miura, Haruko; Meixner, Lisa K.; Irmler, Martin; Kloos, Uwe J.; Hirschi, Benjamin; Bartsch, Harald S.; Sass, Steffen; Beckers, Johannes; Theis, Fabian J.; Gabka, Christian; Sotlar, Karl; Scheel, Christina H.

2015-01-01

We present an organoid regeneration assay in which freshly isolated human mammary epithelial cells are cultured in adherent or floating collagen gels, corresponding to a rigid or compliant matrix environment. In both conditions, luminal progenitors form spheres, whereas basal cells generate branched ductal structures. In compliant but not rigid collagen gels, branching ducts form alveoli at their tips, express basal and luminal markers at correct positions, and display contractility, which is required for alveologenesis. Thereby, branched structures generated in compliant collagen gels resemble terminal ductal-lobular units (TDLUs), the functional units of the mammary gland. Using the membrane metallo-endopeptidase CD10 as a surface marker enriches for TDLU formation and reveals the presence of stromal cells within the CD49fhi/EpCAM− population. In summary, we describe a defined in vitro assay system to quantify cells with regenerative potential and systematically investigate their interaction with the physical environment at distinct steps of morphogenesis. PMID:26071498

HESS Opinions: Functional units: a novel framework to explore the link between spatial organization and hydrological functioning of intermediate scale catchments

NASA Astrophysics Data System (ADS)

Zehe, E.; Ehret, U.; Pfister, L.; Blume, T.; Schröder, B.; Westhoff, M.; Jackisch, C.; Schymanski, S. J.; Weiler, M.; Schulz, K.; Allroggen, N.; Tronicke, J.; Dietrich, P.; Scherer, U.; Eccard, J.; Wulfmeyer, V.; Kleidon, A.

2014-03-01

This opinion paper proposes a novel framework for exploring how spatial organization alongside with spatial heterogeneity controls functioning of intermediate scale catchments of organized complexity. Key idea is that spatial organization in landscapes implies that functioning of intermediate scale catchments is controlled by a hierarchy of functional units: hillslope scale lead topologies and embedded elementary functional units (EFUs). We argue that similar soils and vegetation communities and thus also soil structures "co-developed" within EFUs in an adaptive, self-organizing manner as they have been exposed to similar flows of energy, water and nutrients from the past to the present. Class members of the same EFU (class) are thus deemed to belong to the same ensemble with respect to controls of the energy balance and related vertical flows of capillary bounded soil water and heat. Class members of superordinate lead topologies are characterized by the same spatially organized arrangement of EFUs along the gradient driving lateral flows of free water as well as a similar surface and bedrock topography. We hence postulate that they belong to the same ensemble with respect to controls on rainfall runoff transformation and related vertical and lateral fluxes of free water. We expect class members of these functional units to have a distinct way how their architecture controls the interplay of state dynamics and integral flows, which is typical for all members of one class but dissimilar among the classes. This implies that we might infer on the typical dynamic behavior of the most important classes of EFU and lead topologies in a catchment, by thoroughly characterizing a few members of each class. A major asset of the proposed framework, which steps beyond the concept of hydrological response units, is that it can be tested experimentally. In this respect, we reflect on suitable strategies based on stratified observations drawing from process hydrology, soil physics, geophysics, ecology and remote sensing which are currently conducted in replicates of candidate functional units in the Attert basin (Luxembourg), to search for typical and similar functional and structural characteristics. A second asset of this framework is that it blueprints a way towards a structurally more adequate model concept for water and energy cycles in intermediate scale catchments, which balances necessary complexity with falsifiability. This is because EFU and lead topologies are deemed to mark a hierarchy of "scale breaks" where simplicity with respect to the energy balance and stream flow generation emerges from spatially organized process-structure interactions. This offers the opportunity for simplified descriptions of these processes that are nevertheless physically and thermodynamically consistent. In this respect we reflect on a candidate model structure that (a) may accommodate distributed observations of states and especially terrestrial controls on driving gradients to constrain the space of feasible model structures and (b) allows testing the possible added value of organizing principles to understand the role of spatial organization from an optimality perspective.

The contribution of cluster and discriminant analysis to the classification of complex aquifer systems.

PubMed

Panagopoulos, G P; Angelopoulou, D; Tzirtzilakis, E E; Giannoulopoulos, P

2016-10-01

This paper presents an innovated method for the discrimination of groundwater samples in common groups representing the hydrogeological units from where they have been pumped. This method proved very efficient even in areas with complex hydrogeological regimes. The proposed method requires chemical analyses of water samples only for major ions, meaning that it is applicable to most of cases worldwide. Another benefit of the method is that it gives a further insight of the aquifer hydrogeochemistry as it provides the ions that are responsible for the discrimination of the group. The procedure begins with cluster analysis of the dataset in order to classify the samples in the corresponding hydrogeological unit. The feasibility of the method is proven from the fact that the samples of volcanic origin were separated into two different clusters, namely the lava units and the pyroclastic-ignimbritic aquifer. The second step is the discriminant analysis of the data which provides the functions that distinguish the groups from each other and the most significant variables that define the hydrochemical composition of the aquifer. The whole procedure was highly successful as the 94.7 % of the samples were classified to the correct aquifer system. Finally, the resulted functions can be safely used to categorize samples of either unknown or doubtful origin improving thus the quality and the size of existing hydrochemical databases.

Transistor step stress program for JANTX2N4150

NASA Technical Reports Server (NTRS)

1979-01-01

Reliability analysis of the transistor JANTX2N4150 manufactured by General Semiconductor and Transitron is reported. The discrete devices were subjected to power and temperature step stress tests and then to electrical tests after completing the power/temperature step stress point. Control sample units were maintained for verification of the electrical parametric testing. Results are presented.

Six Steps to a Sustainable Society. Worldwatch Paper 48.

ERIC Educational Resources Information Center

Brown, Lester R.; Shaw, Pamela

This paper discusses six steps which must be taken on a global level to put society on a sustainable path. Of the various steps none is more important than bringing population growth to a halt. The official United Nations medium-level population projects, used by planners throughout the world, show world population reaching some 10.5 billion…

Baby-Friendly Hospital Initiative: evaluation of the Ten Steps to Successful Breastfeeding

PubMed Central

Lopes, Soraia da Silva; Laignier, Mariana Rabello; Primo, Cândida Caniçali; Leite, Franciéle Marabotti C.

2013-01-01

OBJECTIVE: To asses the performance of the Ten Steps to Successful Breastfeeding in an university hospital. METHODS: Descriptive and quantitative research, in which 103 people were interviewed in the outpatient prenatal clinic, in the maternity-ward and in the Neonatal Intensive Care Unit of a university hospital in Vitória, Southeast Brazil. The "Institutional Self-Evaluation Questionnaire" of the Baby Friendly Hospital Initiative was applied. Using this tool, the outcome was measured by the concordance index (CI) proposed by the World Health Organization and by the United Nations Children's Fund. RESULTS: Although the hospital does not have a policy that addresses promotion, protection and support for breastfeeding, 93.3% of the mothers had contact with their babies immediately after birth (step 4), 83.3% of the professionals guided mothers how to breastfeed (step 5), 86.6% of the neonates did not receive any food or drink other than breast milk (step 6), 100% of babies were housed together with their mothers (step 7), 83.3% of the women were encouraged for breastfeeding on demand (step 8) and 100% of the infants did not use bottles or pacifiers (step 9). CONCLUSIONS: 60% of the steps were completed by the hospital. The greatest difficulty was to inform pregnant women about the importance and the management of breastfeeding (step 3). Therefore, visits to pregnant women are recommended, in order to prepare them for breastfeeding and to explain about the infants' healthy feeding habits. PMID:24473954

Predicting United States Medical Licensure Examination Step 2 clinical knowledge scores from previous academic indicators.

PubMed

Monteiro, Kristina A; George, Paul; Dollase, Richard; Dumenco, Luba

2017-01-01

The use of multiple academic indicators to identify students at risk of experiencing difficulty completing licensure requirements provides an opportunity to increase support services prior to high-stakes licensure examinations, including the United States Medical Licensure Examination (USMLE) Step 2 clinical knowledge (CK). Step 2 CK is becoming increasingly important in decision-making by residency directors because of increasing undergraduate medical enrollment and limited available residency vacancies. We created and validated a regression equation to predict students' Step 2 CK scores from previous academic indicators to identify students at risk, with sufficient time to intervene with additional support services as necessary. Data from three cohorts of students (N=218) with preclinical mean course exam score, National Board of Medical Examination subject examinations, and USMLE Step 1 and Step 2 CK between 2011 and 2013 were used in analyses. The authors created models capable of predicting Step 2 CK scores from academic indicators to identify at-risk students. In model 1, preclinical mean course exam score and Step 1 score accounted for 56% of the variance in Step 2 CK score. The second series of models included mean preclinical course exam score, Step 1 score, and scores on three NBME subject exams, and accounted for 67%-69% of the variance in Step 2 CK score. The authors validated the findings on the most recent cohort of graduating students (N=89) and predicted Step 2 CK score within a mean of four points (SD=8). The authors suggest using the first model as a needs assessment to gauge the level of future support required after completion of preclinical course requirements, and rescreening after three of six clerkships to identify students who might benefit from additional support before taking USMLE Step 2 CK.

Assessing the Usefulness of the Decision Framework for Identifying and Selecting Knowledge Management Projects

DTIC Science & Technology

2005-03-01

team-wide accountability and rewards Functional focus Group accountability and rewards Employee-owner interest conflicts Process focus Lack of...Collaborative and cross-functional work Incompatible IT Need to share Compartmentalization of functional groups Localized decision making Centralized...Steps are: • Step 1: Analyze Corporate Strategic Objectives Using SWOT (Strengths, Weaknesses, Opportunities, Threats) Methodology • Step 2

40 CFR 49.153 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... this section). (C) Step 3. If any of the emissions units affected by your proposed modification result... not subject to this program. (2) Increase in an emissions unit's annual allowable emissions limit. If... emissions unit's allowable emissions of a regulated NSR pollutant above its existing annual allowable...

40 CFR 49.153 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... this section). (C) Step 3. If any of the emissions units affected by your proposed modification result... not subject to this program. (2) Increase in an emissions unit's annual allowable emissions limit. If... emissions unit's allowable emissions of a regulated NSR pollutant above its existing annual allowable...

40 CFR 49.153 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... this section). (C) Step 3. If any of the emissions units affected by your proposed modification result... not subject to this program. (2) Increase in an emissions unit's annual allowable emissions limit. If... emissions unit's allowable emissions of a regulated NSR pollutant above its existing annual allowable...

Process for removing an organic compound from water

DOEpatents

Baker, Richard W.; Kaschemekat, Jurgen; Wijmans, Johannes G.; Kamaruddin, Henky D.

1993-12-28

A process for removing organic compounds from water is disclosed. The process involves gas stripping followed by membrane separation treatment of the stripping gas. The stripping step can be carried out using one or multiple gas strippers and using air or any other gas as stripping gas. The membrane separation step can be carried out using a single-stage membrane unit or a multistage unit. Apparatus for carrying out the process is also disclosed. The process is particularly suited for treatment of contaminated groundwater or industrial wastewater.

The Impact of Uncertain Physical Parameters on HVAC Demand Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Yannan; Elizondo, Marcelo A.; Lu, Shuai

HVAC units are currently one of the major resources providing demand response (DR) in residential buildings. Models of HVAC with DR function can improve understanding of its impact on power system operations and facilitate the deployment of DR technologies. This paper investigates the importance of various physical parameters and their distributions to the HVAC response to DR signals, which is a key step to the construction of HVAC models for a population of units with insufficient data. These parameters include the size of floors, insulation efficiency, the amount of solid mass in the house, and efficiency of the HVAC units.more » These parameters are usually assumed to follow Gaussian or Uniform distributions. We study the effect of uncertainty in the chosen parameter distributions on the aggregate HVAC response to DR signals, during transient phase and in steady state. We use a quasi-Monte Carlo sampling method with linear regression and Prony analysis to evaluate sensitivity of DR output to the uncertainty in the distribution parameters. The significance ranking on the uncertainty sources is given for future guidance in the modeling of HVAC demand response.« less

Thematic Unit Planning in Social Studies: Make It Focused and Meaningful

ERIC Educational Resources Information Center

Horton, Todd A.; Barnett, Jennifer A.

2008-01-01

Unit planning is perhaps the most difficult of the teacher duties to execute well. This paper offers suggestions for improving focus and increasing the meaningfulness of thematic unit content for students. Stressing the concept of a Big Understanding, it outlines 6 sequential steps in the creation of units which, when applied, not only establish a…

How We Make Energy Work: Grades 4, 5, 6 Science.

ERIC Educational Resources Information Center

National Science Teachers Association, Washington, DC.

This packet of units is designed to focus on the technological aspects of energy. Four units are presented, with from 1-4 lessons included in each unit. Units include: (1) basic concepts and applications of energy; (2) steps and processes of energy production and transmission; (3) fuel acquisition; and (4) energy futures and application of…

Minimum Performance on Clinical Tests of Physical Function to Predict Walking 6,000 Steps/Day in Knee Osteoarthritis: An Observational Study.

PubMed

Master, Hiral; Thoma, Louise M; Christiansen, Meredith B; Polakowski, Emily; Schmitt, Laura A; White, Daniel K

2018-07-01

Evidence of physical function difficulties, such as difficulty rising from a chair, may limit daily walking for people with knee osteoarthritis (OA). The purpose of this study was to identify minimum performance thresholds on clinical tests of physical function predictive to walking ≥6,000 steps/day. This benchmark is known to discriminate people with knee OA who develop functional limitation over time from those who do not. Using data from the Osteoarthritis Initiative, we quantified daily walking as average steps/day from an accelerometer (Actigraph GT1M) worn for ≥10 hours/day over 1 week. Physical function was quantified using 3 performance-based clinical tests: 5 times sit-to-stand test, walking speed (tested over 20 meters), and 400-meter walk test. To identify minimum performance thresholds for daily walking, we calculated physical function values corresponding to high specificity (80-95%) to predict walking ≥6,000 steps/day. Among 1,925 participants (mean ± SD age 65.1 ± 9.1 years, mean ± SD body mass index 28.4 ± 4.8 kg/m 2 , and 55% female) with valid accelerometer data, 54.9% walked ≥6,000 steps/day. High specificity thresholds of physical function for walking ≥6,000 steps/day ranged 11.4-14.0 seconds on the 5 times sit-to-stand test, 1.13-1.26 meters/second for walking speed, or 315-349 seconds on the 400-meter walk test. Not meeting these minimum performance thresholds on clinical tests of physical function may indicate inadequate physical ability to walk ≥6,000 steps/day for people with knee OA. Rehabilitation may be indicated to address underlying impairments limiting physical function. © 2017, American College of Rheumatology.

Step climbing capacity in patients with pulmonary hypertension.

PubMed

Fox, Benjamin Daniel; Langleben, David; Hirsch, Andrew; Boutet, Kim; Shimony, Avi

2013-01-01

Patients with pulmonary hypertension (PH) typically have exercise intolerance and limitation in climbing steps. To explore the exercise physiology of step climbing in PH patients, on a laboratory-based step test. We built a step oximetry system from an 'aerobics' step equipped with pressure sensors and pulse oximeter linked to a computer. Subjects mounted and dismounted from the step until their maximal exercise capacity or 200 steps was achieved. Step-count, SpO(2) and heart rate were monitored throughout exercise and recovery. We derived indices of exercise performance, desaturation and heart rate. A 6-min walk test and serum NT-proBrain Natriuretic Peptide (BNP) level were measured. Lung function tests and hemodynamic parameters were extracted from the medical record. Eighty-six subjects [52 pulmonary arterial hypertension (PAH), 14 chronic thromboembolic PH (CTEPH), 20 controls] were recruited. Exercise performance (climbing time, height gained, velocity, energy expenditure, work-rate and climbing index) on the step test was significantly worse with PH and/or worsening WHO functional class (ANOVA, p < 0.001). There was a good correlation between exercise performance on the step and 6-min walking distance-climb index (r = -0.77, p < 0.0001). The saturation deviation (mean of SpO(2) values <95 %) on the step test correlated with diffusion capacity of the lung (ρ = -0.49, p = 0.001). No correlations were found between the step test indices and other lung function tests, hemodynamic parameters or NT-proBNP levels. Patients with PAH/CTEPH have significant limitation in step climbing ability that correlates with functional class and 6-min walking distance. This is a significant impediment to their daily activities.

The Data Box and Within-Subject Analyses: A Comment on Nesselroade and Molenaar (2016).

PubMed

Revelle, William; Wilt, Joshua

2016-01-01

Nesselroade and Molenaar suggest that it is the relationships between latent variables within subjects that are invariant across subjects and thus the appropriate unit of analysis. We disagree and take the view that between-factor correlations may differ systematically across subjects. Further, individual differences in these correlations may be an important source of information about each unique individual. Following from this premise, analyses of consistencies and differences between subjects of the within-subject pattern of interfactor correlations is a step toward an integrative science of behavior. We give several examples demonstrating how this approach has the potential to yield novel insights into personality functioning.

Visible Motion Blur

NASA Technical Reports Server (NTRS)

Watson, Andrew B. (Inventor); Ahumada, Albert J. (Inventor)

2014-01-01

A method of measuring motion blur is disclosed comprising obtaining a moving edge temporal profile r(sub 1)(k) of an image of a high-contrast moving edge, calculating the masked local contrast m(sub1)(k) for r(sub 1)(k) and the masked local contrast m(sub 2)(k) for an ideal step edge waveform r(sub 2)(k) with the same amplitude as r(sub 1)(k), and calculating the measure or motion blur Psi as a difference function, The masked local contrasts are calculated using a set of convolution kernels scaled to simulate the performance of the human visual system, and Psi is measured in units of just-noticeable differences.

Nanopatterning of Surfaces with Monometallic and Heterobimetallic 1D Coordination Polymers: A Molecular Tectonics Approach at the Solid/Liquid Interface.

PubMed

El Garah, Mohamed; Marets, Nicolas; Mauro, Matteo; Aliprandi, Alessandro; Bonacchi, Sara; De Cola, Luisa; Ciesielski, Artur; Bulach, Véronique; Hosseini, Mir Wais; Samorì, Paolo

2015-07-08

The self-assembly of multiple molecular components into complex supramolecular architectures is ubiquitous in nature and constitutes one of the most powerful strategies to fabricate multifunctional nanomaterials making use of the bottom-up approach. When spatial confinement in two dimensions on a solid substrate is employed, this approach can be exploited to generate periodically ordered structures from suitably designed molecular tectons. In this study we demonstrate that physisorbed directional periodic arrays of monometallic or heterobimetallic coordination polymers can be generated on a highly oriented pyrolitic graphite surface by combinations of a suitably designed directional organic tecton or metallatecton based on a porphyrin or nickel(II) metalloporphyrin backbone bearing both a pyridyl unit and a terpyridyl unit acting as coordinating sites for CoCl2. The periodic architectures were visualized at the solid/liquid interface with a submolecular resolution by scanning tunneling microscopy and corroborated by combined density functional and time-dependent density functional theory calculations. The capacity to nanopattern the surface for the first time with two distinct metallic centers exhibiting different electronic and optical properties is a key step toward the bottom-up construction of robust multicomponent and, thus, multifunctional molecular nanostructures and nanodevices.

Automated assembling of single fuel cell units for use in a fuel cell stack

NASA Astrophysics Data System (ADS)

Jalba, C. K.; Muminovic, A.; Barz, C.; Nasui, V.

2017-05-01

The manufacturing of PEMFC stacks (POLYMER ELEKTROLYT MEMBRAN Fuel Cell) is nowadays still done by hand. Over hundreds of identical single components have to be placed accurate together for the construction of a fuel cell stack. Beside logistic problems, higher total costs and disadvantages in weight the high number of components produce a higher statistic interference because of faulty erection or material defects and summation of manufacturing tolerances. The saving of costs is about 20 - 25 %. Furthermore, the total weight of the fuel cells will be reduced because of a new sealing technology. Overall a one minute cycle time has to be aimed per cell at the manufacturing of these single components. The change of the existing sealing concept to a bonded sealing is one of the important requisites to get an automated manufacturing of single cell units. One of the important steps for an automated gluing process is the checking of the glue application by using of an image processing system. After bonding the single fuel cell the sealing and electrical function can be checked, so that only functional and high qualitative cells can get into further manufacturing processes.

The first radical-based spintronic memristors: Towards resistive RAMs made of organic magnets

NASA Astrophysics Data System (ADS)

Goss, Karin; Krist, Florian; Seyfferle, Simon; Hoefel, Udo; Paretzki, Alexa; Dressel, Martin; Bogani, Lapo; Institut Fuer Anorganische Chemie, University of Stuttgart Collaboration; 1. Physikalisches Institut, University of Stuttgart Team

2014-03-01

Using molecules as building blocks for electronic devices offers ample possibilities for new device functionalities due to a chemical tunability much higher than that of standard inorganic materials, and at the same time offers a decrease in the size of the electronic component down to the single-molecule level. Purely organic molecules containing no metallic centers such as organic radicals can serve as an electronic component with magnetic properties due to the unpaired electron in the radical state. Here we present memristive logic units based on organic radicals of the nitronyl-nitroxide kind. Integrating these purely molecular units as a spin coated layer into crossbar arrays, electrically induced unipolar resistive switching is observed with a change in resistance of up to 100%. We introduce a model based on filamentary reorganization of molecules of different oxidation state revealing the importance of the molecular nature for the switching properties. The major role of the oxidation state of these paramagnetic molecules introduces a magnetic field dependence to the device functionality, which goes along with magnetoresistive charactistics observed for the material. These are the first steps towards a spintronic implementation of organic radicals in electronic devices.

Self-Contained Math Manual. Teacher's Guide.

ERIC Educational Resources Information Center

Grant, Shelia I.

This instructional manual consists of 11 competency-based units for a mathematics course for trade and industrial programs in Texas. Each instructional unit includes the following basic components: unit and specific objectives, notes to the instructor (outline of steps to follow in accomplishing specific objectives), information sheets,…

Optimized synthesis of phosphorothioate oligodeoxyribonucleotides substituted with a 5′-protected thiol function and a 3′-amino group

PubMed Central

Aubert, Yves; Bourgerie, Sylvain; Meunier, Laurent; Mayer, Roger; Roche, Annie-Claude; Monsigny, Michel; Thuong, Nguyen T.; Asseline, Ulysse

2000-01-01

A new deprotection procedure enables a medium scale preparation of phosphodiester and phosphorothioate oligonucleotides substituted with a protected thiol function at their 5′-ends and an amino group at their 3′-ends in good yield (up to 72 OD units/µmol for a 19mer phosphorothioate). Syntheses of 3′-amino-substituted oligonucleotides were carried out on a modified support. A linker containing the thioacetyl moiety was manually coupled in two steps by first adding its phosphoramidite derivative in the presence of tetrazole followed by either oxidation or sulfurization to afford the bis-derivatized oligonucleotide bound to the support. Deprotection was achieved by treating the fully protected oligonucleotide with a mixture of 2,2′-dithiodipyridine and concentrated aqueous ammonia in the presence of phenol and methanol. This procedure enables (i) cleavage of the oligonucleotide from the support, releasing the oligonucleotide with a free amino group at its 3′-end, (ii) deprotection of the phosphate groups and the amino functions of the nucleic bases, as well as (iii) transformation of the 5′-terminal S-acetyl function into a dithiopyridyl group. The bis-derivatized phosphorothioate oligomer was further substituted through a two-step procedure: first, the 3′-amino group was reacted with fluorescein isothiocyanate to yield a fluoresceinylated oligonucleotide; the 5′-dithiopyridyl group was then quantitatively reduced to give a free thiol group which was then substituted by reaction with an Nα-bromoacetyl derivative of a signal peptide containing a KDEL sequence to afford a fluoresceinylated peptide–oligonucleotide conjugate. PMID:10637335

Speech Privacy Problems

DTIC Science & Technology

1945-08-18

were interconnected, how? ever,, it was found that one of the oscillators had an intermit - tent, defect-. This trouble was cleared by removing the...switches> i.e., two pairsL are included in.the unit," one of ä pair of selectors {the " fast selector") steps .each time the latch operates, the other (the...34slow seleotor") steps oiice eaoh time the fast seleotor completes 25 steps. Thus, a total of 625 steps, or changes in permutation, is involved be

Diode step stress program, JANTX1N5614

NASA Technical Reports Server (NTRS)

1978-01-01

The reliability of switching diode JANTX1N5614 was tested. The effect of power/temperature step stress on the diode was determined. Control sample units were maintained for verification of the electrical parametric testing. Results are reported.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tumuluru, Jaya Shankar; McCulloch, Richard Chet James

In this work a new hybrid genetic algorithm was developed which combines a rudimentary adaptive steepest ascent hill climbing algorithm with a sophisticated evolutionary algorithm in order to optimize complex multivariate design problems. By combining a highly stochastic algorithm (evolutionary) with a simple deterministic optimization algorithm (adaptive steepest ascent) computational resources are conserved and the solution converges rapidly when compared to either algorithm alone. In genetic algorithms natural selection is mimicked by random events such as breeding and mutation. In the adaptive steepest ascent algorithm each variable is perturbed by a small amount and the variable that caused the mostmore » improvement is incremented by a small step. If the direction of most benefit is exactly opposite of the previous direction with the most benefit then the step size is reduced by a factor of 2, thus the step size adapts to the terrain. A graphical user interface was created in MATLAB to provide an interface between the hybrid genetic algorithm and the user. Additional features such as bounding the solution space and weighting the objective functions individually are also built into the interface. The algorithm developed was tested to optimize the functions developed for a wood pelleting process. Using process variables (such as feedstock moisture content, die speed, and preheating temperature) pellet properties were appropriately optimized. Specifically, variables were found which maximized unit density, bulk density, tapped density, and durability while minimizing pellet moisture content and specific energy consumption. The time and computational resources required for the optimization were dramatically decreased using the hybrid genetic algorithm when compared to MATLAB's native evolutionary optimization tool.« less

Accessing FMS Functionality: The Impact of Design on Learning

NASA Technical Reports Server (NTRS)

Fennell, Karl; Sherry, Lance; Roberts, Ralph, Jr.

2004-01-01

In modern commercial and military aircraft, the Flight Management System (FMS) lies at the heart of the functionality of the airplane. The nature of the FMS has also caused great difficulties learning and accessing this functionality. This study examines actual Air Force pilots who were qualified on the newly introduced advanced FMS and shows that the design of the system itself is a primary source of difficulty learning the system. Twenty representative tasks were selected which the pilots could be expected to accomplish on an ' actual flight. These tasks were analyzed using the RAFIV stage model (Sherry, Polson, et al. 2002). This analysis demonstrates that a great burden is placed on remembering complex reformulation of the task to function mapping. 65% of the tasks required retaining one access steps in memory to accomplish the task, 20% required two memorized access steps, and 15% required zero memorized access steps. The probability that a participant would make an access error on the tasks was: two memorized access steps - 74%, one memorized access step - 13%, and zero memorized access steps - 6%. Other factors were analyzed as well, including experience with the system and frequency of use. This completed the picture of a system with many memorized steps causing difficulty with the new system, especially when trying to fine where to access the correct function.

Searching new signals for production traits through gene-based association analysis in three Italian cattle breeds.

PubMed

Capomaccio, Stefano; Milanesi, Marco; Bomba, Lorenzo; Cappelli, Katia; Nicolazzi, Ezequiel L; Williams, John L; Ajmone-Marsan, Paolo; Stefanon, Bruno

2015-08-01

Genome-wide association studies (GWAS) have been widely applied to disentangle the genetic basis of complex traits. In cattle breeds, classical GWAS approaches with medium-density marker panels are far from conclusive, especially for complex traits. This is due to the intrinsic limitations of GWAS and the assumptions that are made to step from the association signals to the functional variations. Here, we applied a gene-based strategy to prioritize genotype-phenotype associations found for milk production and quality traits with classical approaches in three Italian dairy cattle breeds with different sample sizes (Italian Brown n = 745; Italian Holstein n = 2058; Italian Simmental n = 477). Although classical regression on single markers revealed only a single genome-wide significant genotype-phenotype association, for Italian Holstein, the gene-based approach identified specific genes in each breed that are associated with milk physiology and mammary gland development. As no standard method has yet been established to step from variation to functional units (i.e., genes), the strategy proposed here may contribute to revealing new genes that play significant roles in complex traits, such as those investigated here, amplifying low association signals using a gene-centric approach. © 2015 Stichting International Foundation for Animal Genetics.

Derivation of linearized transfer functions for switching-mode regulations. Phase A: Current step-up and voltage step-up converters

NASA Technical Reports Server (NTRS)

Wong, R. C.; Owen, H. A., Jr.; Wilson, T. G.

1981-01-01

Small-signal models are derived for the power stage of the voltage step-up (boost) and the current step-up (buck) converters. The modeling covers operation in both the continuous-mmf mode and the discontinuous-mmf mode. The power stage in the regulated current step-up converter on board the Dynamics Explorer Satellite is used as an example to illustrate the procedures in obtaining the small-signal functions characterizing a regulated converter.

Crosstalk Cancellation for a Simultaneous Phase Shifting Interferometer

NASA Technical Reports Server (NTRS)

Olczak, Eugene (Inventor)

2014-01-01

A method of minimizing fringe print-through in a phase-shifting interferometer, includes the steps of: (a) determining multiple transfer functions of pixels in the phase-shifting interferometer; (b) computing a crosstalk term for each transfer function; and (c) displaying, to a user, a phase-difference map using the crosstalk terms computed in step (b). Determining a transfer function in step (a) includes measuring intensities of a reference beam and a test beam at the pixels, and measuring an optical path difference between the reference beam and the test beam at the pixels. Computing crosstalk terms in step (b) includes computing an N-dimensional vector, where N corresponds to the number of transfer functions, and the N-dimensional vector is obtained by minimizing a variance of a modulation function in phase shifted images.

Developing and Implementing a Process for the Review of Nonacademic Units.

ERIC Educational Resources Information Center

Brown, Marilyn K.

1989-01-01

A major research university's recently developed process for systematic evaluation of nonacademic units is described, and the steps in its development and implementation are outlined: review of literature on organizational effectiveness; survey of peer institutions; development of guidelines for review; and implementation in several campus units.…

Mountain Plains Learning Experience Guide: Marketing. Course: Visual Merchandising.

ERIC Educational Resources Information Center

Preston, T.; Egan, B.

One of thirteen individualized courses included in a marketing curriculum, this course covers the steps to be followed in planning, constructing, and evaluating the effectiveness of merchandise displays. The course is comprised of one unit, General Merchandise Displays. The unit begins with a Unit Learning Experience Guide that gives directions…

Hydrothermal atomic force microscopy observations of barite step growth rates as a function of the aqueous barium-to-sulfate ratio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bracco, Jacquelyn N.; Gooijer, Yiscka; Higgins, Steven R.

The rate of growth of ionic minerals from solutions with varying aqueous cation:anion ratios may result in significant errors in mineralization rates predicted by commonly-used affinity-based rate equations. To assess the potential influence of solute stoichiometry on barite growth, step velocities on the barite (001) surface have been measured at 108 °C using hydrothermal atomic force microscopy (HAFM) at moderate supersaturation and as a function of the aqueous barium:sulfate ratio (r). Barite growth hillocks at r ~ 1 were bounded bymore » $$\\langle$$120$$\\rangle$$ steps, however at r < 1, kink site densities increased, steps followed a direction vicinal to $$\\langle$$120$$\\rangle$$, and the [010] steps developed. At r > 1, steps roughened and rounded as the kink site density increased. Step velocities peaked at r = 1 and decreased roughly symmetrically as a function of r, indicating the attachment rates of barium and sulfate ions are similar under these conditions. We hypothesize that the differences in our observations at high and low r arise from differences in the attachment rate constants for the obtuse and acute $$\\langle$$120$$\\rangle$$ steps. Based on results at low r, the data suggests the attachment rate constant for barium ions is similar for obtuse and acute steps. Based on results at high r, the data suggests the attachment rate constant for sulfate is greater for obtuse steps than acute steps. In conclusion, utilizing a step growth model developed by Stack and Grantham (2010) the experimental step velocities as a function of r were readily fit while attempts to fit the data using a model developed by Zhang and Nancollas (1998) were less successful.« less

Hydrothermal atomic force microscopy observations of barite step growth rates as a function of the aqueous barium-to-sulfate ratio

DOE PAGES

Bracco, Jacquelyn N.; Gooijer, Yiscka; Higgins, Steven R.

2016-03-19

The rate of growth of ionic minerals from solutions with varying aqueous cation:anion ratios may result in significant errors in mineralization rates predicted by commonly-used affinity-based rate equations. To assess the potential influence of solute stoichiometry on barite growth, step velocities on the barite (001) surface have been measured at 108 °C using hydrothermal atomic force microscopy (HAFM) at moderate supersaturation and as a function of the aqueous barium:sulfate ratio (r). Barite growth hillocks at r ~ 1 were bounded bymore » $$\\langle$$120$$\\rangle$$ steps, however at r < 1, kink site densities increased, steps followed a direction vicinal to $$\\langle$$120$$\\rangle$$, and the [010] steps developed. At r > 1, steps roughened and rounded as the kink site density increased. Step velocities peaked at r = 1 and decreased roughly symmetrically as a function of r, indicating the attachment rates of barium and sulfate ions are similar under these conditions. We hypothesize that the differences in our observations at high and low r arise from differences in the attachment rate constants for the obtuse and acute $$\\langle$$120$$\\rangle$$ steps. Based on results at low r, the data suggests the attachment rate constant for barium ions is similar for obtuse and acute steps. Based on results at high r, the data suggests the attachment rate constant for sulfate is greater for obtuse steps than acute steps. In conclusion, utilizing a step growth model developed by Stack and Grantham (2010) the experimental step velocities as a function of r were readily fit while attempts to fit the data using a model developed by Zhang and Nancollas (1998) were less successful.« less

Starting Trees from Cuttings.

ERIC Educational Resources Information Center

Kramer, David C.

1983-01-01

Describes a procedure for starting tree cuttings from woody plants, explaining "lag time," recommending materials, and giving step-by-step instructions for rooting and planting. Points out species which are likely candidates for cuttings and provides tips for teachers for developing a unit. (JM)

Multi-period equilibrium/near-equilibrium in electricity markets based on locational marginal prices

NASA Astrophysics Data System (ADS)

Garcia Bertrand, Raquel

In this dissertation we propose an equilibrium procedure that coordinates the point of view of every market agent resulting in an equilibrium that simultaneously maximizes the independent objective of every market agent and satisfies network constraints. Therefore, the activities of the generating companies, consumers and an independent system operator are modeled: (1) The generating companies seek to maximize profits by specifying hourly step functions of productions and minimum selling prices, and bounds on productions. (2) The goals of the consumers are to maximize their economic utilities by specifying hourly step functions of demands and maximum buying prices, and bounds on demands. (3) The independent system operator then clears the market taking into account consistency conditions as well as capacity and line losses so as to achieve maximum social welfare. Then, we approach this equilibrium problem using complementarity theory in order to have the capability of imposing constraints on dual variables, i.e., on prices, such as minimum profit conditions for the generating units or maximum cost conditions for the consumers. In this way, given the form of the individual optimization problems, the Karush-Kuhn-Tucker conditions for the generating companies, the consumers and the independent system operator are both necessary and sufficient. The simultaneous solution to all these conditions constitutes a mixed linear complementarity problem. We include minimum profit constraints imposed by the units in the market equilibrium model. These constraints are added as additional constraints to the equivalent quadratic programming problem of the mixed linear complementarity problem previously described. For the sake of clarity, the proposed equilibrium or near-equilibrium is first developed for the particular case considering only one time period. Afterwards, we consider an equilibrium or near-equilibrium applied to a multi-period framework. This model embodies binary decisions, i.e., on/off status for the units, and therefore optimality conditions cannot be directly applied. To avoid limitations provoked by binary variables, while retaining the advantages of using optimality conditions, we define the multi-period market equilibrium using Benders decomposition, which allows computing binary variables through the master problem and continuous variables through the subproblem. Finally, we illustrate these market equilibrium concepts through several case studies.

Skills for Health Care Assistants. Supplemental Units for Health Care and Nurse Assistants Programs. Student Guide. Revised.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This guide contains 13 units to be used as a supplement in nurse assistant and health services courses. The units are self-paced and contain simplified line drawings, controlled text, vocabulary development, and mathematics practice exercises. Units consist of objectives, an introduction, a content outline, steps of a procedure, skill sheets,…

Skills for Health Care Assistants Vol. II. Supplemental Units for Health Care and Nurse Assistants Programs. Student Guide. Instructor Key. Revised.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This student guide for courses for health care assistants and nurse assistants contains 16 self-paced units with simplified line drawings, controlled text, vocabulary development, and mathematics practice exercises. Units consist of the following: objectives, introduction to the unit, content outline, steps of the procedure, skill sheets, written…

Solar array stepping to minimize array excitation

NASA Technical Reports Server (NTRS)

Bhat, Mahabaleshwar K. P. (Inventor); Liu, Tung Y. (Inventor); Plescia, Carl T. (Inventor)

1989-01-01

Mechanical oscillations of a mechanism containing a stepper motor, such as a solar-array powered spacecraft, are reduced and minimized by the execution of step movements in pairs of steps, the period between steps being equal to one-half of the period of torsional oscillation of the mechanism. Each pair of steps is repeated at needed intervals to maintain desired continuous movement of the portion of elements to be moved, such as the solar array of a spacecraft. In order to account for uncertainty as well as slow change in the period of torsional oscillation, a command unit may be provided for varying the interval between steps in a pair.

Graph analysis of functional brain networks: practical issues in translational neuroscience

PubMed Central

De Vico Fallani, Fabrizio; Richiardi, Jonas; Chavez, Mario; Achard, Sophie

2014-01-01

The brain can be regarded as a network: a connected system where nodes, or units, represent different specialized regions and links, or connections, represent communication pathways. From a functional perspective, communication is coded by temporal dependence between the activities of different brain areas. In the last decade, the abstract representation of the brain as a graph has allowed to visualize functional brain networks and describe their non-trivial topological properties in a compact and objective way. Nowadays, the use of graph analysis in translational neuroscience has become essential to quantify brain dysfunctions in terms of aberrant reconfiguration of functional brain networks. Despite its evident impact, graph analysis of functional brain networks is not a simple toolbox that can be blindly applied to brain signals. On the one hand, it requires the know-how of all the methodological steps of the pipeline that manipulate the input brain signals and extract the functional network properties. On the other hand, knowledge of the neural phenomenon under study is required to perform physiologically relevant analysis. The aim of this review is to provide practical indications to make sense of brain network analysis and contrast counterproductive attitudes. PMID:25180301

Parents Who Care: A Step-by-Step Guide for Families with Teens. [Video Included].

ERIC Educational Resources Information Center

Hawkins, J. David; Catalano, Richard F.

The world can be a risky place for teenagers in the 1990s. This guide and videotape provide skills for parents who want to help teens move successfully through the steps from childhood to adulthood. Based on extensive research, each of the seven units in the guide includes advice, strategies, and activities for both parents and teens to improve…

Identifying elderly people at risk for cognitive decline by using the 2-step test.

PubMed

Maruya, Kohei; Fujita, Hiroaki; Arai, Tomoyuki; Hosoi, Toshiki; Ogiwara, Kennichi; Moriyama, Shunnichiro; Ishibashi, Hideaki

2018-01-01

[Purpose] The purpose is to verify the effectiveness of the 2-step test in predicting cognitive decline in elderly individuals. [Subjects and Methods] One hundred eighty-two participants aged over 65 years underwent the 2-step test, cognitive function tests and higher level competence testing. Participants were classified as Robust, <1.3, and <1.1 using criteria regarding the locomotive syndrome risk stage for the 2-step test, variables were compared between groups. In addition, ordered logistic analysis was used to analyze cognitive functions as independent variables in the three groups, using the 2-step test results as the dependent variable, with age, gender, etc. as adjustment factors. [Results] In the crude data, the <1.3 and <1.1 groups were older and displayed lower motor and cognitive functions than did the Robust group. Furthermore, the <1.3 group exhibited significantly lower memory retention than did the Robust group. The 2-step test was related to the Stroop test (β: 0.06, 95% confidence interval: 0.01-0.12). [Conclusion] The finding is that the risk stage of the 2-step test is related to cognitive functions, even at an initial risk stage. The 2-step test may help with earlier detection and implementation of prevention measures for locomotive syndrome and mild cognitive impairment.

Software to compute elastostatic Green's functions for sources in 3D homogeneous elastic layers above a (visco)elastic halfspace

NASA Astrophysics Data System (ADS)

Bradley, A. M.; Segall, P.

2012-12-01

We describe software, in development, to calculate elastostatic displacement Green's functions and their derivatives for point and polygonal dislocations in three-dimensional homogeneous elastic layers above an elastic or a viscoelastic halfspace. The steps to calculate a Green's function for a point source at depth zs are as follows. 1. A grid in wavenumber space is chosen. 2. A six-element complex rotated stress-displacement vector x is obtained at each grid point by solving a two-point boundary value problem (2P-BVP). If the halfspace is viscoelastic, the solution is inverse Laplace transformed. 3. For each receiver, x is propagated to the receiver depth zr (often zr = 0) and then, 4, inverse Fourier transformed, with the Fourier component corresponding to the receiver's horizontal position. 5. The six elements are linearly combined into displacements and their derivatives. The dominant work is in step 2. The grid is chosen to represent the wavenumber-space solution with as few points as possible. First, the wavenumber space is transformed to increase sampling density near 0 wavenumber. Second, a tensor-product grid of Chebyshev points of the first kind is constructed in each quadrant of the transformed wavenumber space. Moment-tensor-dependent symmetries further reduce work. The numerical solution of the 2P-BVP problem in step 2 involves solving a linear equation A x = b. Half of the elements of x are of geophysical interest; the subset depends on whether zr ≤ zs. Denote these \\hat x. As wavenumber k increases, \\hat x can become inaccurate in finite precision arithmetic for two reasons: 1. The condition number of A becomes too large. 2. The norm-wise relative error (NWRE) in \\hat x is large even though it is small in x. To address this problem, a number of researchers have used determinants to obtain x. This may be the best approach for 6-dimensional or smaller 2P-BVP, where the combinatorial increase in work is still moderate. But there is an alternative. Let \\bar A be the matrix after scaling its columns to unit infinity norm and \\bar x the scaled x. If \\bar A is well conditioned, as it often is in (visco)elastostatic problems, then using determinants is unnecessary. Multiply each side of A x = b by a propagator matrix to the computation depth zcd prior to storing the matrix in finite precision. zcd is determined by the rule that zr and zcd must be on opposite sides of zs. Let the resulting matrix be A(zcd). Three facts imply that this rule controls the NWRE in \\hat x: 1. Diagonally scaling a matrix changes the accuracy of an element of the solution by about one ULP (unit in the last place). 2. If the NWRE of \\bar x is small, then the largest elements are accurate. 3. zcd controls the magnitude of elements in \\bar x. In step 4, to avoid numerically Fourier transforming the (nearly) non-square-integrable functions that arise when the receiver and source depths are (nearly) the same, a function is divided into an analytical part and a numerical part that goes quickly to 0 as k -> ∞ . Our poster will describe these calculations, present a preliminary interface to a C-language package in development, and show some physical results.

Foot-mounted inertial measurement unit for activity classification.

PubMed

Ghobadi, Mostafa; Esfahani, Ehsan T

2014-01-01

This paper proposes a classification technique for daily base activity recognition for human monitoring during physical therapy in home. The proposed method estimates the foot motion using single inertial measurement unit, then segments the motion into steps classify them by template-matching as walking, stairs up or stairs down steps. The results show a high accuracy of activity recognition. Unlike previous works which are limited to activity recognition, the proposed approach is more qualitative by providing similarity index of any activity to its desired template which can be used to assess subjects improvement.

Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin.

PubMed

Moon, H-J; Lee, Y-K; Lim, B-S; Kim, C-W

2004-03-01

The purpose of this study was to evaluate the effect of the various light curing units (plasma arc, halogen and light-emitting diodes) and irradiation methods (one-step, two-step and pulse) using different light energy densities on the leachability of unreacted monomers (Bis-GMA and UDMA) and the surface hardness of a composite resin (Z250, 3M). Leachability of the specimens immersed for 7 days in ethanol was analysed by HPLC. Vicker's hardness number (VHN) was measured immediately after curing (IC) and after immersion in ethanol for 7 days. Various irradiation methods with three curing units resulted in differences in the amount of leached monomers and VHN of IC when light energy density was lower than 17.0 J cm(-2) (P = 0.05). However, regardless of curing units and irradiation methods, these results were not different when the time or light energy density increased. When similar light energy density was irradiated (15.6-17.7 J cm(-2)), the efficiency of irradiation methods was different by the following order: one-step > or = two-step > pulse. These results suggest that the amount of leached monomers and VHN were influenced by forming polymer structure in activation and initiation stages of polymerization process with different light source energies and curing times.

Disruption of striatal-enriched protein tyrosine phosphatase (STEP) function in neuropsychiatric disorders

PubMed Central

Karasawa, Takatoshi; Lombroso, Paul J.

2014-01-01

Striatal-enriched protein tyrosine phosphatase (STEP) is a brain-specific tyrosine phosphatase that plays a major role in the development of synaptic plasticity. Recent findings have implicated STEP in several psychiatric and neurological disorders, including Alzheimer’s disease, schizophrenia, fragile X syndrome, Huntington’s disease, stroke/ischemia, and stress-related psychiatric disorders. In these disorders, STEP protein expression levels and activity are dysregulated, contributing to the cognitive deficits that are present. In this review, we focus on the most recent findings on STEP, discuss how STEP expression and activity are maintained during normal cognitive function, and how disruptions in STEP activity contribute to a number of illnesses. PMID:25218562

A Pearson Random Walk with Steps of Uniform Orientation and Dirichlet Distributed Lengths

NASA Astrophysics Data System (ADS)

Le Caër, Gérard

2010-08-01

A constrained diffusive random walk of n steps in ℝ d and a random flight in ℝ d , which are equivalent, were investigated independently in recent papers (J. Stat. Phys. 127:813, 2007; J. Theor. Probab. 20:769, 2007, and J. Stat. Phys. 131:1039, 2008). The n steps of the walk are independent and identically distributed random vectors of exponential length and uniform orientation. Conditioned on the sum of their lengths being equal to a given value l, closed-form expressions for the distribution of the endpoint of the walk were obtained altogether for any n for d=1,2,4. Uniform distributions of the endpoint inside a ball of radius l were evidenced for a walk of three steps in 2D and of two steps in 4D. The previous walk is generalized by considering step lengths which have independent and identical gamma distributions with a shape parameter q>0. Given the total walk length being equal to 1, the step lengths have a Dirichlet distribution whose parameters are all equal to q. The walk and the flight above correspond to q=1. Simple analytical expressions are obtained for any d≥2 and n≥2 for the endpoint distributions of two families of walks whose q are integers or half-integers which depend solely on d. These endpoint distributions have a simple geometrical interpretation. Expressed for a two-step planar walk whose q=1, it means that the distribution of the endpoint on a disc of radius 1 is identical to the distribution of the projection on the disc of a point M uniformly distributed over the surface of the 3D unit sphere. Five additional walks, with a uniform distribution of the endpoint in the inside of a ball, are found from known finite integrals of products of powers and Bessel functions of the first kind. They include four different walks in ℝ3, two of two steps and two of three steps, and one walk of two steps in ℝ4. Pearson-Liouville random walks, obtained by distributing the total lengths of the previous Pearson-Dirichlet walks according to some specified probability law are finally discussed. Examples of unconstrained random walks, whose step lengths are gamma distributed, are more particularly considered.

A step-by-step guide to non-linear regression analysis of experimental data using a Microsoft Excel spreadsheet.

PubMed

Brown, A M

2001-06-01

The objective of this present study was to introduce a simple, easily understood method for carrying out non-linear regression analysis based on user input functions. While it is relatively straightforward to fit data with simple functions such as linear or logarithmic functions, fitting data with more complicated non-linear functions is more difficult. Commercial specialist programmes are available that will carry out this analysis, but these programmes are expensive and are not intuitive to learn. An alternative method described here is to use the SOLVER function of the ubiquitous spreadsheet programme Microsoft Excel, which employs an iterative least squares fitting routine to produce the optimal goodness of fit between data and function. The intent of this paper is to lead the reader through an easily understood step-by-step guide to implementing this method, which can be applied to any function in the form y=f(x), and is well suited to fast, reliable analysis of data in all fields of biology.

Reduced global brain metabolism but maintained vascular function in amnestic mild cognitive impairment.

PubMed

Thomas, Binu P; Sheng, Min; Tseng, Benjamin Y; Tarumi, Takashi; Martin-Cook, Kristen; Womack, Kyle B; Cullum, Munro C; Levine, Benjamin D; Zhang, Rong; Lu, Hanzhang

2017-04-01

Amnestic mild cognitive impairment represents an early stage of Alzheimer's disease, and characterization of physiological alterations in mild cognitive impairment is an important step toward accurate diagnosis and intervention of this condition. To investigate the extent of neurodegeneration in patients with mild cognitive impairment, whole-brain cerebral metabolic rate of oxygen in absolute units of µmol O 2 /min/100 g was quantified in 44 amnestic mild cognitive impairment and 28 elderly controls using a novel, non-invasive magnetic resonance imaging method. We found a 12.9% reduction ( p = 0.004) in cerebral metabolic rate of oxygen in mild cognitive impairment, which was primarily attributed to a reduction in the oxygen extraction fraction, by 10% ( p = 0.016). Global cerebral blood flow was not found to be different between groups. Another aspect of vascular function, cerebrovascular reactivity, was measured by CO 2 -inhalation magnetic resonance imaging and was found to be equivalent between groups. Therefore, there seems to be a global, diffuse diminishment in neural function in mild cognitive impairment, while their vascular function did not show a significant reduction.

Advanced Photovoltaic Inverter Control Development and Validation in a Controller-Hardware-in-the-Loop Test Bed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prabakar, Kumaraguru; Shirazi, Mariko; Singh, Akanksha

Penetration levels of solar photovoltaic (PV) generation on the electric grid have increased in recent years. In the past, most PV installations have not included grid-support functionalities. But today, standards such as the upcoming revisions to IEEE 1547 recommend grid support and anti-islanding functions-including volt-var, frequency-watt, volt-watt, frequency/voltage ride-through, and other inverter functions. These functions allow for the standardized interconnection of distributed energy resources into the grid. This paper develops and tests low-level inverter current control and high-level grid support functions. The controller was developed to integrate advanced inverter functions in a systematic approach, thus avoiding conflict among the differentmore » control objectives. The algorithms were then programmed on an off-the-shelf, embedded controller with a dual-core computer processing unit and field-programmable gate array (FPGA). This programmed controller was tested using a controller-hardware-in-the-loop (CHIL) test bed setup using an FPGA-based real-time simulator. The CHIL was run at a time step of 500 ns to accommodate the 20-kHz switching frequency of the developed controller. The details of the advanced control function and CHIL test bed provided here will aide future researchers when designing, implementing, and testing advanced functions of PV inverters.« less

Decision Making. Level Two/Three. Career Guidance.

ERIC Educational Resources Information Center

Cooper, Irene; And Others

Materials contained in this career guidance unit are designed to provide the seven-, eight-, or nine-year-old student with a framework of logical steps for decision making and problem solving. The seventeen activities included in the unit vary in length from thirty to sixty minutes; the entire unit requires approximately ten hours of instructional…

Native American Career Education Unit. From Idea to Product.

ERIC Educational Resources Information Center

Far West Lab. for Educational Research and Development, San Francisco, CA.

One of twelve instructional units in the Native American Career Education (NACE) program, this unit is intended to help Indian junior high school students understand the steps involved in making a product. Focus is on the subject areas of economics, lumber and furniture industries, and woodworking. The first two activities concern the nature of…

A STEP fault in Central Betics, associated with lateral lithospheric tearing at the northern edge of the Gibraltar arc subduction system

NASA Astrophysics Data System (ADS)

Mancilla, Flor de Lis; Heit, Benjamin; Morales, Jose; Yuan, Xiaohui; Stich, Daniel; Molina-Aguilera, Antonio; Azañon, Jose Miguel; Martín, Rosa

2018-03-01

We study the crustal and lithospheric mantle structure under central Betics in the westernmost Mediterranean region by migrating P-receiver functions along a dense seismic profile (∼2 km interstation distance). The profile, North-South oriented, probes the crustal structure of different geological units, from the Alboran domain in the south with metamorphic rocks, through the External Zones with sedimentary rocks to the Variscan terrains of the Iberian Massif in the north. From north to south, the Moho depth increases from ∼30 km to ∼46 km underneath the Guadix basin, due to the underthrusting of the Iberian crust below the Alboran crust, and suddenly shallows to ∼30 km underneath the Internal Zones with a step of 17 km. This sharp Moho step correlates well with a lithospheric step of ∼40 km, where the thickness of the lithosphere changes abruptly from ∼100 km in the north to ∼50 km in the south. We interpret this sharp and prominent lithospheric step as the termination of the Iberian lithosphere caused by a near-vertical STEP (Subduction-Transform-Edge-Propagator) fault that continues towards the surface as a positive flower tectonic structure of crustal scale. This STEP fault is located at the northern edge of the narrow Westernmost Mediterranean subduction system facilitating the slab rollback motion towards the west. The sharp termination of the Iberian lithosphere occurs under the contact between the Alpujarride and the Nevado-Filabride complexes of the Alboran domain in an ENE-WSW right-lateral transpressive shear zone. The thickest crust and lithosphere do not correlate with the highest topography along the profile suggesting that this high topography is a combined effect of the positive flower structure, and the push up of the asthenosphere produced by the removal of the Iberian lithosphere.

Theoretical Study of the Mechanism Behind the para-Selective Nitration of Toluene in Zeolite H-Beta

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andersen, Amity; Govind, Niranjan; Subramanian, Lalitha

Periodic density functional theory calculations were performed to investigate the origin of the favorable para-selective nitration of toluene exhibited by zeolite H-beta with acetyl nitrate nitration agent. Energy calculations were performed for each of the 32 crystallographically unique Bronsted acid sites of a beta polymorph B zeolite unit cell with multiple Bronsted acid sites of comparable stability. However, one particular aluminum T-site with three favorable Bronsted site oxygens embedded in a straight 12-T channel wall provides multiple favorable proton transfer sites. Transition state searches around this aluminum site were performed to determine the barrier to reaction for both para andmore » ortho nitration of toluene. A three-step process was assumed for the nitration of toluene with two organic intermediates: the pi- and sigma-complexes. The rate limiting step is the proton transfer from the sigma-complex to a zeolite Bronsted site. The barrier for this step in ortho nitration is shown to be nearly 2.5 times that in para nitration. This discrepancy appears to be due to steric constraints imposed by the curvature of the large 12-T pore channels of beta and the toluene methyl group in the ortho approach that are not present in the para approach.« less

Cooperativity and tunable excited state deactivation: modular self-assembly of depsipeptide dendrons on a Hamilton receptor modified porphyrin platform.

PubMed

Gnichwitz, Jan-Frederik; Wielopolski, Mateusz; Hartnagel, Kristine; Hartnagel, Uwe; Guldi, Dirk M; Hirsch, Andreas

2008-07-02

A series of novel supramolecular architectures were built around a tin tetraphenyl porphyrin platform 6--functionalized by a 2-fold 1-ethyl-3-3-(3-dimethylaminopropyl)carbodiimide (EDC) promoted condensation reaction--and chiral depsipeptide dendrons of different generations 1-4. Here, implementation of a Hamilton receptor provided the necessary means to keep the constituents together via strong hydrogen bonding. Characterization of all architectures has been performed, including 4 which is the fourth generation, on the basis of NMR and photophysical methods. In particular, several titration experiments were conducted suggesting positive cooperativity, an assessment that is based on association constants that tend to be higher for the second binding step than for the first step. Importantly, molecular modeling calculations reveal a significant deaggregation of the intermolecular network of 6 during the course of the first binding step. As a consequence, an improved accessibility of the second Hamilton receptor unit in 6 emerges and, in turn, facilitates the higher association constants. The features of the equilibrium, that is, the dynamic exchange of depsipeptide dendrons 1-4 with fullerene 5, was tested in photophysical reference experiments. These steady-state and time-resolved measurements showed the tunable excited-state deactivations of these complexes upon photoexcitation.

Three Classes of Nonparametric Differential Step Functioning Effect Estimators

ERIC Educational Resources Information Center

Penfield, Randall D.

2008-01-01

The examination of measurement invariance in polytomous items is complicated by the possibility that the magnitude and sign of lack of invariance may vary across the steps underlying the set of polytomous response options, a concept referred to as differential step functioning (DSF). This article describes three classes of nonparametric DSF effect…

Therapeutic Implications for Striatal-Enriched Protein Tyrosine Phosphatase (STEP) in Neuropsychiatric Disorders

PubMed Central

Goebel-Goody, Susan M.; Baum, Matthew; Paspalas, Constantinos D.; Fernandez, Stephanie M.; Carty, Niki C.; Kurup, Pradeep

2012-01-01

Striatal-enriched protein tyrosine phosphatase (STEP) is a brain-specific phosphatase that modulates key signaling molecules involved in synaptic plasticity and neuronal function. Targets include extracellular-regulated kinase 1 and 2 (ERK1/2), stress-activated protein kinase p38 (p38), the Src family tyrosine kinase Fyn, N-methyl-d-aspartate receptors (NMDARs), and α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid receptors (AMPARs). STEP-mediated dephosphorylation of ERK1/2, p38, and Fyn leads to inactivation of these enzymes, whereas STEP-mediated dephosphorylation of surface NMDARs and AMPARs promotes their endocytosis. Accordingly, the current model of STEP function posits that it opposes long-term potentiation and promotes long-term depression. Phosphorylation, cleavage, dimerization, ubiquitination, and local translation all converge to maintain an appropriate balance of STEP in the central nervous system. Accumulating evidence over the past decade indicates that STEP dysregulation contributes to the pathophysiology of several neuropsychiatric disorders, including Alzheimer's disease, schizophrenia, fragile X syndrome, epileptogenesis, alcohol-induced memory loss, Huntington's disease, drug abuse, stroke/ischemia, and inflammatory pain. This comprehensive review discusses STEP expression and regulation and highlights how disrupted STEP function contributes to the pathophysiology of diverse neuropsychiatric disorders. PMID:22090472

Apomorphine

MedlinePlus

... needle unit. Wash your hands with soap and water. If you already have a medication cartridge in the injector pen, go to step 7 below. To insert a new medication cartridge into the injector pen, follow steps 3 through 6. Pull off the grey pen cap. Unscrew the cartridge holder from the ...

Biographical Study and Hypothesis Testing. Instructional Technology.

ERIC Educational Resources Information Center

Little, Timothy H.

1995-01-01

Asserts that the story of Amelia Earhart holds an ongoing fascination for students. Presents an instructional unit using a spreadsheet to create a database about Earhart's final flight. Includes student objectives, step-by-step instructional procedures, and eight graphics of student information or teacher examples. (CFR)

WTP Waste Feed Qualification: Glass Fabrication Unit Operation Testing Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, M. E.; Newell, J. D.; Johnson, F. C.

The waste feed qualification program is being developed to protect the Hanford Tank Waste Treatment and Immobilization Plant (WTP) design, safety basis, and technical basis by assuring waste acceptance requirements are met for each staged waste feed campaign prior to transfer from the Tank Operations Contractor to the feed receipt vessels inside the Pretreatment Facility. The Waste Feed Qualification Program Plan describes the three components of waste feed qualification: 1. Demonstrate compliance with the waste acceptance criteria 2. Determine waste processability 3. Test unit operations at laboratory scale. The glass fabrication unit operation is the final step in the processmore » demonstration portion of the waste feed qualification process. This unit operation generally consists of combining each of the waste feed streams (high-level waste (HLW) and low-activity waste (LAW)) with Glass Forming Chemicals (GFCs), fabricating glass coupons, performing chemical composition analysis before and after glass fabrication, measuring hydrogen generation rate either before or after glass former addition, measuring rheological properties before and after glass former addition, and visual observation of the resulting glass coupons. Critical aspects of this unit operation are mixing and sampling of the waste and melter feeds to ensure representative samples are obtained as well as ensuring the fabrication process for the glass coupon is adequate. Testing was performed using a range of simulants (LAW and HLW simulants), and these simulants were mixed with high and low bounding amounts of GFCs to evaluate the mixing, sampling, and glass preparation steps in shielded cells using laboratory techniques. The tests were performed with off-the-shelf equipment at the Savannah River National Laboratory (SRNL) that is similar to equipment used in the SRNL work during qualification of waste feed for the Defense Waste Processing Facility (DWPF) and other waste treatment facilities at the Savannah River Site. It is not expected that the exact equipment used during this testing will be used during the waste feed qualification testing for WTP, but functionally similar equipment will be used such that the techniques demonstrated would be applicable. For example, the mixing apparatus could use any suitable mixer capable of being remoted and achieving similar mixing speeds to those tested.« less

Surveillance Training for Ebola Preparedness in Côte d'Ivoire, Guinea-Bissau, Senegal, and Mali.

PubMed

Cáceres, Victor M; Sidibe, Sekou; Andre, McKenzie; Traicoff, Denise; Lambert, Stephanie; King, Melanie; Kazambu, Ditu; Lopez, Augusto; Pedalino, Biagio; Guibert, Dionisio J Herrera; Wassawa, Peter; Cardoso, Placido; Assi, Bernard; Ly, Alioune; Traore, Bouyagui; Angulo, Frederick J; Quick, Linda

2017-12-01

The 2014-2015 epidemic of Ebola virus disease in West Africa primarily affected Guinea, Liberia, and Sierra Leone. Several countries, including Mali, Nigeria, and Senegal, experienced Ebola importations. Realizing the importance of a trained field epidemiology workforce in neighboring countries to respond to Ebola importations, the Centers for Disease Control and Prevention Field Epidemiology Training Program unit implemented the Surveillance Training for Ebola Preparedness (STEP) initiative. STEP was a mentored, competency-based initiative to rapidly build up surveillance capacity along the borders of the at-risk neighboring countries Côte d'Ivoire, Mali, Senegal, and Guinea-Bissau. The target audience was district surveillance officers. STEP was delivered to 185 participants from 72 health units (districts or regions). Timeliness of reporting and the quality of surveillance analyses improved 3 months after training. STEP demonstrated that mentored, competency-based training, where learners attain competencies while delivering essential public health services, can be successfully implemented in an emergency response setting.

Implementation of Energy Code Controls Requirements in New Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, Michael I.; Hart, Philip R.; Hatten, Mike

Most state energy codes in the United States are based on one of two national model codes; ANSI/ASHRAE/IES 90.1 (Standard 90.1) or the International Code Council (ICC) International Energy Conservation Code (IECC). Since 2004, covering the last four cycles of Standard 90.1 updates, about 30% of all new requirements have been related to building controls. These requirements can be difficult to implement and verification is beyond the expertise of most building code officials, yet the assumption in studies that measure the savings from energy codes is that they are implemented and working correctly. The objective of the current research ismore » to evaluate the degree to which high impact controls requirements included in commercial energy codes are properly designed, commissioned and implemented in new buildings. This study also evaluates the degree to which these control requirements are realizing their savings potential. This was done using a three-step process. The first step involved interviewing commissioning agents to get a better understanding of their activities as they relate to energy code required controls measures. The second involved field audits of a sample of commercial buildings to determine whether the code required control measures are being designed, commissioned and correctly implemented and functioning in new buildings. The third step includes compilation and analysis of the information gather during the first two steps. Information gathered during these activities could be valuable to code developers, energy planners, designers, building owners, and building officials.« less

A novel and simple test of gait adaptability predicts gold standard measures of functional mobility in stroke survivors.

PubMed

Hollands, K L; Pelton, T A; van der Veen, S; Alharbi, S; Hollands, M A

2016-01-01

Although there is evidence that stroke survivors have reduced gait adaptability, the underlying mechanisms and the relationship to functional recovery are largely unknown. We explored the relationships between walking adaptability and clinical measures of balance, motor recovery and functional ability in stroke survivors. Stroke survivors (n=42) stepped to targets, on a 6m walkway, placed to elicit step lengthening, shortening and narrowing on paretic and non-paretic sides. The number of targets missed during six walks and target stepping speed was recorded. Fugl-Meyer (FM), Berg Balance Scale (BBS), self-selected walking speed (SWWS) and single support (SS) and step length (SL) symmetry (using GaitRite when not walking to targets) were also assessed. Stepwise multiple-linear regression was used to model the relationships between: total targets missed, number missed with paretic and non-paretic legs, target stepping speed, and each clinical measure. Regression revealed a significant model for each outcome variable that included only one independent variable. Targets missed by the paretic limb, was a significant predictor of FM (F(1,40)=6.54, p=0.014,). Speed of target stepping was a significant predictor of each of BBS (F(1,40)=26.36, p<0.0001), SSWS (F(1,40)=37.00, p<0.0001). No variables were significant predictors of SL or SS asymmetry. Speed of target stepping was significantly predictive of BBS and SSWS and paretic targets missed predicted FM, suggesting that fast target stepping requires good balance and accurate stepping demands good paretic leg function. The relationships between these parameters indicate gait adaptability is a clinically meaningful target for measurement and treatment of functionally adaptive walking ability in stroke survivors. Copyright © 2015 Elsevier B.V. All rights reserved.

Integrated pathway-based transcription regulation network mining and visualization based on gene expression profiles.

PubMed

Kibinge, Nelson; Ono, Naoaki; Horie, Masafumi; Sato, Tetsuo; Sugiura, Tadao; Altaf-Ul-Amin, Md; Saito, Akira; Kanaya, Shigehiko

2016-06-01

Conventionally, workflows examining transcription regulation networks from gene expression data involve distinct analytical steps. There is a need for pipelines that unify data mining and inference deduction into a singular framework to enhance interpretation and hypotheses generation. We propose a workflow that merges network construction with gene expression data mining focusing on regulation processes in the context of transcription factor driven gene regulation. The pipeline implements pathway-based modularization of expression profiles into functional units to improve biological interpretation. The integrated workflow was implemented as a web application software (TransReguloNet) with functions that enable pathway visualization and comparison of transcription factor activity between sample conditions defined in the experimental design. The pipeline merges differential expression, network construction, pathway-based abstraction, clustering and visualization. The framework was applied in analysis of actual expression datasets related to lung, breast and prostrate cancer. Copyright © 2016 Elsevier Inc. All rights reserved.

Benzene construction via organocatalytic formal [3+3] cycloaddition reaction.

PubMed

Zhu, Tingshun; Zheng, Pengcheng; Mou, Chengli; Yang, Song; Song, Bao-An; Chi, Yonggui Robin

2014-09-25

The benzene unit, in its substituted forms, is a most common scaffold in natural products, bioactive molecules and polymer materials. Nearly 80% of the 200 best selling small molecule drugs contain at least one benzene moiety. Not surprisingly, the synthesis of substituted benzenes receives constant attentions. At present, the dominant methods use pre-existing benzene framework to install substituents by using conventional functional group manipulations or transition metal-catalyzed carbon-hydrogen bond activations. These otherwise impressive approaches require multiple synthetic steps and are ineffective from both economic and environmental perspectives. Here we report an efficient method for the synthesis of substituted benzene molecules. Instead of relying on pre-existing aromatic rings, here we construct the benzene core through a carbene-catalyzed formal [3+3] reaction. Given the simplicity and high efficiency, we expect this strategy to be of wide use especially for large scale preparation of biomedicals and functional materials.

Assessment of Blood Glucose Control in the Pediatric Intensive Care Unit: Extension of the Glycemic Penalty Index toward Children and Infants

PubMed Central

Van Herpe, Tom; Gielen, Marijke; Vanhonsebrouck, Koen; Wouters, Pieter J; Van den Berghe, Greet; De Moor, Bart; Mesotten, Dieter

2011-01-01

Background: The glycemic penalty index (GPI) is a measure to assess blood glucose (BG) control in critically ill adult patients but needs to be adapted for children and infants. Method: The squared differences between a clinical expertise penalty function and the corresponding polynomial function are minimized for optimization purposes. The average of all penalties (individually assigned to all BG readings) represents the patient-specific GPI. Results: Penalization in the hypoglycemic range is more severe than in the hyperglycemic range as the developing brains of infants and children may be more vulnerable to hypoglycemia. Similarly, hypoglycemia is also more heavily penalized in infants than in children. Conclusions: Extending the adult GPI toward the age-specific GPI is an important methodological step. Long-term clinical studies are needed to determine the clinically acceptable GPI cut-off level. PMID:21527105

Using NASA Satellite Observations to Map Wildfire Risk in the United States for Allocation of Fire Management Resources

NASA Astrophysics Data System (ADS)

Farahmand, A.; Reager, J. T., II; Behrangi, A.; Stavros, E. N.; Randerson, J. T.

2017-12-01

Fires are a key disturbance globally acting as a catalyst for terrestrial ecosystem change and contributing significantly to both carbon emissions and changes in surface albedo. The socioeconomic impacts of wildfire activities are also significant with wildfire activity results in billions of dollars of losses every year. Fire size, area burned and frequency are increasing, thus the likelihood of fire danger, defined by United States National Interagency Fire Center (NFIC) as the demand of fire management resources as a function of how flammable fuels (a function of ignitability, consumability and availability) are from normal, is an important step toward reducing costs associated with wildfires. Numerous studies have aimed to predict the likelihood of fire danger, but few studies use remote sensing data to map fire danger at scales commensurate with regional management decisions (e.g., deployment of resources nationally throughout fire season with seasonal and monthly prediction). Here, we use NASA Gravity Recovery And Climate Experiment (GRACE) assimilated surface soil moisture, NASA Atmospheric Infrared Sounder (AIRS) vapor pressure deficit, NASA Moderate Resolution Imaging Spectroradiometer (MODIS) enhanced vegetation index products and landcover products, along with US Forest Service historical fire activity data to generate probabilistic monthly fire potential maps in the United States. These maps can be useful in not only government operational allocation of fire management resources, but also improving understanding of the Earth System and how it is changing in order to refine predictions of fire extremes.

Evidence from in Situ X-ray Absorption Spectroscopy for the Involvement of Terminal Disulfide in the Reduction of Protons by an Amorphous Molybdenum Sulfide Electrocatalyst

DOE PAGES

Lassalle-Kaiser, Benedikt; Merki, Daniel; Vrubel, Heron; ...

2015-11-26

The reduction of protons into dihydrogen is important because of its potential use in a wide range of energy applications. The preparation of efficient and cheap catalysts for this reaction is one of the issues that need to be tackled to allow the widespread use of hydrogen as an energy carrier. In this paper, we report the study of an amorphous molybdenum sulfide (MoS x) proton reducing electrocatalyst under functional conditions, using in situ X-ray absorption spectroscopy. We probed the local and electronic structures of both the molybdenum and sulfur elements for the as prepared material as well as themore » precatalytic and catalytic states. The as prepared material is very similar to MoS 3 and remains unmodified under functional conditions (pH = 2 aqueous HNO 3) in the precatalytic state (+0.3 V vs RHE). In its catalytic state (-0.3 V vs RHE), the film is reduced to an amorphous form of MoS 2 and shows spectroscopic features that indicate the presence of terminal disulfide units. These units are formed concomitantly with the release of hydrogen, and we suggest that the rate-limiting step of the HER is the reduction and protonation of these disulfide units. In conclusion, these results show the implication of terminal disulfide chemical motifs into HER driven by transition-metal sulfides and provide insight into their reaction mechanism.« less

Student Failures on First-Year Medical Basic Science Courses and the USMLE Step 1: A Retrospective Study over a 20-Year Period

ERIC Educational Resources Information Center

Burns, E. Robert; Garrett, Judy

2015-01-01

Correlates of achievement in the basic science years in medical school and on the Step 1 of the United States Medical Licensing Examination® (USMLE®), (Step 1) in relation to preadmission variables have been the subject of considerable study. Preadmissions variables such as the undergraduate grade point average (uGPA) and Medical College Admission…

Coupled-cluster sum-frequency generation nonlinear susceptibilities of methyl (CH3) and methylene (CH2) groups.

PubMed

Tetsassi Feugmo, Conrard Giresse; Liégeois, Vincent; Champagne, Benoît

2017-11-15

The first vibrational sum frequency generation (SFG) spectra based on molecular properties calculated at the coupled cluster singles and doubles (CCSD) level of approximation have been simulated for interfacial model alkyl chains, providing benchmark data for comparisons with approximate methods, including density functional theory (DFT). The approach proceeds in three steps. In the first two steps, the molecular spectral properties are determined: the vibrational normal modes and frequencies and then the derivatives of the dipole moment and of the polarizability with respect to the normal coordinates. These derivatives are evaluated with a numerical differentiation approach, of which the accuracy was monitored using Romberg's procedure. Then, in the last step, a three-layer model is employed to evaluate the macroscopic second-order nonlinear optical responses and thereby the simulated SFG spectra of the alkyl interface. Results emphasize the following facts: (i) the dipole and polarizability derivatives calculated at the DFT level with the B3LYP exchange-correlation functional can differ, with respect to CCSD, by as much as ±10 to 20% and ±20 to 50% for the CH 3 and CH 2 vibrations, respectively; (ii) these differences are enhanced when considering the SFG intensities as well as their variations as a function of the experimental configuration (ppp versus ssp) and as a function of the tilt and rotation angles, defining the orientation of the alkyl chain at the interface; (iii) these differences originate from both the vibrational normal coordinates and the Cartesian derivatives of the dipole moment and polarizability; (iv) freezing the successive fragments of the alkyl chain strongly modifies the SFG spectrum and enables highlighting the delocalization effects between the terminal CH 3 group and its neighboring CH 2 units; and finally (v) going from the free chain to the free methyl model, and further to C 3v constraints on leads to large variations of two ratios that are frequently used to probe the molecular orientation at the interface, the (r + r)/r + ratio for both antisymmetric and symmetric CH 3 vibrations and the I ppp /I ssp ratio.

Aquifer response to stream-stage and recharge variations. II. Convolution method and applications

NASA Astrophysics Data System (ADS)

Barlow, P. M.; DeSimone, L. A.; Moench, A. F.

2000-05-01

In this second of two papers, analytical step-response functions, developed in the companion paper for several cases of transient hydraulic interaction between a fully penetrating stream and a confined, leaky, or water-table aquifer, are used in the convolution integral to calculate aquifer heads, streambank seepage rates, and bank storage that occur in response to stream-stage fluctuations and basinwide recharge or evapotranspiration. Two computer programs developed on the basis of these step-response functions and the convolution integral are applied to the analysis of hydraulic interaction of two alluvial stream-aquifer systems in the northeastern and central United States. These applications demonstrate the utility of the analytical functions and computer programs for estimating aquifer and streambank hydraulic properties, recharge rates, streambank seepage rates, and bank storage. Analysis of the water-table aquifer adjacent to the Blackstone River in Massachusetts suggests that the very shallow depth of water table and associated thin unsaturated zone at the site cause the aquifer to behave like a confined aquifer (negligible specific yield). This finding is consistent with previous studies that have shown that the effective specific yield of an unconfined aquifer approaches zero when the capillary fringe, where sediment pores are saturated by tension, extends to land surface. Under this condition, the aquifer's response is determined by elastic storage only. Estimates of horizontal and vertical hydraulic conductivity, specific yield, specific storage, and recharge for a water-table aquifer adjacent to the Cedar River in eastern Iowa, determined by the use of analytical methods, are in close agreement with those estimated by use of a more complex, multilayer numerical model of the aquifer. Streambank leakance of the semipervious streambank materials also was estimated for the site. The streambank-leakance parameter may be considered to be a general (or lumped) parameter that accounts not only for the resistance of flow at the river-aquifer boundary, but also for the effects of partial penetration of the river and other near-stream flow phenomena not included in the theoretical development of the step-response functions.

Secret Formulas. GEMS Teacher's Guide.

ERIC Educational Resources Information Center

Tilley, Rebecca; Willard, Carolyn

This teacher's guide features step-by-step instructions for activities that use easily-obtained and inexpensive materials as well as background information, literature connections, and assessment ideas. The unit allows students the opportunity to focus on observing and describing the properties and attributes of substances. In these activities,…

Calculating with light using a chip-scale all-optical abacus.

PubMed

Feldmann, J; Stegmaier, M; Gruhler, N; Ríos, C; Bhaskaran, H; Wright, C D; Pernice, W H P

2017-11-02

Machines that simultaneously process and store multistate data at one and the same location can provide a new class of fast, powerful and efficient general-purpose computers. We demonstrate the central element of an all-optical calculator, a photonic abacus, which provides multistate compute-and-store operation by integrating functional phase-change materials with nanophotonic chips. With picosecond optical pulses we perform the fundamental arithmetic operations of addition, subtraction, multiplication, and division, including a carryover into multiple cells. This basic processing unit is embedded into a scalable phase-change photonic network and addressed optically through a two-pulse random access scheme. Our framework provides first steps towards light-based non-von Neumann arithmetic.

Naphtyl- and pyrenyl-flavylium dyads: Synthesis, DFT and optical properties

NASA Astrophysics Data System (ADS)

Aguilar-Castillo, Bethsy Adriana; Sánchez-Bojorge, Nora Aydee; Chávez-Flores, David; Camacho-Dávila, Alejandro A.; Pasillas-Ornelas, Eddie; Rodríguez-Valdez, Luz-María; Zaragoza-Galán, Gerardo

2018-03-01

A one-step preparation of flavylium salts containing naphtyl and pyrenyl moieties is described hereafter. Flavylium salts were successfully characterized by 1H NMR spectroscopy and ESI-MS spectrometry. Theoretical calculations were carried out by means of Density Functional Theory in order to simulate flavylium cation electronic transitions. Molecular simulation of -naphtyl derivatives displayed a coplanar conformation between naphthalene and benzopyrylium moieties. In contrast, DFT analysis exhibited a non-coplanar arrangement of pyrene and benzopyrylium units. These former statements in coherence with the absorption experiments where the naphtyl-flavylium dyads shows a red-shifted maximum absorption band with respect to pyrene dyads, led us to conclude that these bathochromic effects are associated with a more planar conformation.

An Evaluation of a Teacher Training Program at the United States Holocaust Memorial Museum

ERIC Educational Resources Information Center

DeBerry, LaMonnia Edge

2015-01-01

The purpose of this mixed methods study was to explore the effects of the United States Holocaust Memorial Museum's work in partnering with professors from universities across the United States during a 1-year collaborative partnership through an educational program referred to as Belfer First Step Holocaust Institute for Teacher Educators (BFS…

To designate the United States courthouse under construction at 101 South United States Route 1 in Fort Pierce, Florida, as the "Alto Lee Adams, Sr., United States Courthouse".

THOMAS, 111th Congress

Rep. Rooney, Thomas J. [R-FL-16

2009-07-13

Senate - 09/10/2009 Received in the Senate and Read twice and referred to the Committee on Environment and Public Works. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Mathematics. Unit 6: A Core Curriculum of Related Instruction for Apprentices.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Occupational and Career Curriculum Development.

The mathematics unit is presented to assist apprentices to acquire a general knowledge of mathematic skills. The unit consists of nine modules: (1) basic addition, subtraction, multiplication, and division; (2) conventional linear measure; (3) using the metric system, (4) steps to take in solving problems, (5) how to calculate areas and volumes,…

Flow field measurements in the cell culture unit

NASA Technical Reports Server (NTRS)

Walker, Stephen; Wilder, Mike; Dimanlig, Arsenio; Jagger, Justin; Searby, Nancy

2002-01-01

The cell culture unit (CCU) is being designed to support cell growth for long-duration life science experiments on the International Space Station (ISS). The CCU is a perfused loop system that provides a fluid environment for controlled cell growth experiments within cell specimen chambers (CSCs), and is intended to accommodate diverse cell specimen types. Many of the functional requirements depend on the fluid flow field within the CSC (e.g., feeding and gas management). A design goal of the CCU is to match, within experimental limits, all environmental conditions, other than the effects of gravity on the cells, whether the hardware is in microgravity ( micro g), normal Earth gravity, or up to 2g on the ISS centrifuge. In order to achieve this goal, two steps are being taken. The first step is to characterize the environmental conditions of current 1g cell biology experiments being performed in laboratories using ground-based hardware. The second step is to ensure that the design of the CCU allows the fluid flow conditions found in 1g to be replicated from microgravity up to 2g. The techniques that are being used to take these steps include flow visualization, particle image velocimetry (PIV), and computational fluid dynamics (CFD). Flow visualization using the injection of dye has been used to gain a global perspective of the characteristics of the CSC flow field. To characterize laboratory cell culture conditions, PIV is being used to determine the flow field parameters of cell suspension cultures grown in Erlenmeyer flasks on orbital shakers. These measured parameters will be compared to PIV measurements in the CSCs to ensure that the flow field that cells encounter in CSCs is within the bounds determined for typical laboratory experiments. Using CFD, a detailed simulation is being developed to predict the flow field within the CSC for a wide variety of flow conditions, including microgravity environments. Results from all these measurements and analyses of the CSC flow environment are presented and discussed. The final configuration of the CSC employs magnetic stir bars with angled paddles to achieve the necessary flow requirements within the CSC.

Method and apparatus for reconstructing in-cylinder pressure and correcting for signal decay

DOEpatents

Huang, Jian

2013-03-12

A method comprises steps for reconstructing in-cylinder pressure data from a vibration signal collected from a vibration sensor mounted on an engine component where it can generate a signal with a high signal-to-noise ratio, and correcting the vibration signal for errors introduced by vibration signal charge decay and sensor sensitivity. The correction factors are determined as a function of estimated motoring pressure and the measured vibration signal itself with each of these being associated with the same engine cycle. Accordingly, the method corrects for charge decay and changes in sensor sensitivity responsive to different engine conditions to allow greater accuracy in the reconstructed in-cylinder pressure data. An apparatus is also disclosed for practicing the disclosed method, comprising a vibration sensor, a data acquisition unit for receiving the vibration signal, a computer processing unit for processing the acquired signal and a controller for controlling the engine operation based on the reconstructed in-cylinder pressure.

Organization and post-transcriptional processing of the psb B operon from chloroplasts of Populus deltoides.

PubMed

Dixit, R; Trivedi, P K; Nath, P; Sane, P V

1999-09-01

Chloroplast genes are typically organized into polycistronic transcription units that give rise to complex sets of mono- and oligo-cistronic overlapping RNAs through a series of processing steps. The psbB operon contains genes for the PSII (psbB, psbT, psbH) and cytochrome b(6)f (petB and petD) complexes which are needed in different amounts during chloroplast biogenesis. The functional significance of gene organization in this polycistronic unit, containing information for two different complexes, is not known and is of interest. To determine the organization and expression of these complexes, studies have been carried out on crop plants by different groups, but not much information is known about trees. We present the nucleotide sequences of PSII genes and RNA profiles of the genes located in the psbB operon from Populus deltoides, a tree species. Although the gene organization of this operon in P. deltoides is similar to that in other species, a few variations have been observed in the processing scheme.

Computational and Pharmacological Target of Neurovascular Unit for Drug Design and Delivery

PubMed Central

2015-01-01

The blood-brain barrier (BBB) is a dynamic and highly selective permeable interface between central nervous system (CNS) and periphery that regulates the brain homeostasis. Increasing evidences of neurological disorders and restricted drug delivery process in brain make BBB as special target for further study. At present, neurovascular unit (NVU) is a great interest and highlighted topic of pharmaceutical companies for CNS drug design and delivery approaches. Some recent advancement of pharmacology and computational biology makes it convenient to develop drugs within limited time and affordable cost. In this review, we briefly introduce current understanding of the NVU, including molecular and cellular composition, physiology, and regulatory function. We also discuss the recent technology and interaction of pharmacogenomics and bioinformatics for drug design and step towards personalized medicine. Additionally, we develop gene network due to understand NVU associated transporter proteins interactions that might be effective for understanding aetiology of neurological disorders and new target base protective therapies development and delivery. PMID:26579539

On effective temperature in network models of collective behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Porfiri, Maurizio, E-mail: mporfiri@nyu.edu; Ariel, Gil, E-mail: arielg@math.biu.ac.il

Collective behavior of self-propelled units is studied analytically within the Vectorial Network Model (VNM), a mean-field approximation of the well-known Vicsek model. We propose a dynamical systems framework to study the stochastic dynamics of the VNM in the presence of general additive noise. We establish that a single parameter, which is a linear function of the circular mean of the noise, controls the macroscopic phase of the system—ordered or disordered. By establishing a fluctuation–dissipation relation, we posit that this parameter can be regarded as an effective temperature of collective behavior. The exact critical temperature is obtained analytically for systems withmore » small connectivity, equivalent to low-density ensembles of self-propelled units. Numerical simulations are conducted to demonstrate the applicability of this new notion of effective temperature to the Vicsek model. The identification of an effective temperature of collective behavior is an important step toward understanding order–disorder phase transitions, informing consistent coarse-graining techniques and explaining the physics underlying the emergence of collective phenomena.« less

Quantification of regenerative potential in primary human mammary epithelial cells.

PubMed

Linnemann, Jelena R; Miura, Haruko; Meixner, Lisa K; Irmler, Martin; Kloos, Uwe J; Hirschi, Benjamin; Bartsch, Harald S; Sass, Steffen; Beckers, Johannes; Theis, Fabian J; Gabka, Christian; Sotlar, Karl; Scheel, Christina H

2015-09-15

We present an organoid regeneration assay in which freshly isolated human mammary epithelial cells are cultured in adherent or floating collagen gels, corresponding to a rigid or compliant matrix environment. In both conditions, luminal progenitors form spheres, whereas basal cells generate branched ductal structures. In compliant but not rigid collagen gels, branching ducts form alveoli at their tips, express basal and luminal markers at correct positions, and display contractility, which is required for alveologenesis. Thereby, branched structures generated in compliant collagen gels resemble terminal ductal-lobular units (TDLUs), the functional units of the mammary gland. Using the membrane metallo-endopeptidase CD10 as a surface marker enriches for TDLU formation and reveals the presence of stromal cells within the CD49f(hi)/EpCAM(-) population. In summary, we describe a defined in vitro assay system to quantify cells with regenerative potential and systematically investigate their interaction with the physical environment at distinct steps of morphogenesis. © 2015. Published by The Company of Biologists Ltd.

Crystallization and preliminary X-ray diffraction analysis of Leishmania major dihydroorotate dehydrogenase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cordeiro, Artur T.; Feliciano, Patricia R.; Nonato, M. Cristina, E-mail: cristy@fcfrp.usp.br

2006-10-01

Dihydroorotate dehydrogenase from L. major has been crystallized by the vapour-diffusion technique using lithium sulfate as the precipitant agent. A complete data set from a native crystal has been collected to 2.0 Å resolution using an in-house rotating-anode generator. Dihydroorotate dehydrogenases (DHODHs) are flavin-containing enzymes that catalyze the oxidation of l-dihydroorotate to orotate, the fourth step in the de novo pyrimidine nucleotide synthesis pathway. In this study, DHODH from Leishmania major has been crystallized by the vapour-diffusion technique using lithium sulfate as the precipitating agent. The crystals belong to space group P6{sub 1}, with unit-cell parameters a = 143.7, cmore » = 69.8 Å. X-ray diffraction data were collected to 2.0 Å resolution using an in-house rotating-anode generator. Analysis of the solvent content and the self-rotation function indicate the presence of two molecules in the asymmetric unit. The structure has been solved by the molecular-replacement technique.« less

Softening non-metallic crystals by inhomogeneous elasticity.

PubMed

Howie, P R; Thompson, R P; Korte-Kerzel, S; Clegg, W J

2017-09-14

High temperature structural materials must be resistant to cracking and oxidation. However, most oxidation resistant materials are brittle and a significant reduction in their yield stress is required if they are to be resistant to cracking. It is shown, using density functional theory, that if a crystal's unit cell elastically deforms in an inhomogeneous manner, the yield stress is greatly reduced, consistent with observations in layered compounds, such as Ti 3 SiC 2 , Nb 2 Co 7 , W 2 B 5 , Ta 2 C and Ta 4 C 3 . The mechanism by which elastic inhomogeneity reduces the yield stress is explained and the effect demonstrated in a complex metallic alloy, even though the electronegativity differences within the unit cell are less than in the layered compounds. Substantial changes appear possible, suggesting this is a first step in developing a simple way of controlling plastic flow in non-metallic crystals, enabling materials with a greater oxidation resistance and hence a higher temperature capability to be used.

Multi-objective Optimization of a Solar Humidification Dehumidification Desalination Unit

NASA Astrophysics Data System (ADS)

Rafigh, M.; Mirzaeian, M.; Najafi, B.; Rinaldi, F.; Marchesi, R.

2017-11-01

In the present paper, a humidification-dehumidification desalination unit integrated with solar system is considered. In the first step mathematical model of the whole plant is represented. Next, taking into account the logical constraints, the performance of the system is optimized. On one hand it is desired to have higher energetic efficiency, while on the other hand, higher efficiency results in an increment in the required area for each subsystem which consequently leads to an increase in the total cost of the plant. In the present work, the optimum solution is achieved when the specific energy of the solar heater and also the areas of humidifier and dehumidifier are minimized. Due to the fact that considered objective functions are in conflict, conventional optimization methods are not applicable. Hence, multi objective optimization using genetic algorithm which is an efficient tool for dealing with problems with conflicting objectives has been utilized and a set of optimal solutions called Pareto front each of which is a tradeoff between the mentioned objectives is generated.

Micrometer-scale fabrication of complex three dimensional lattice + basis structures in silicon

DOE PAGES

Burckel, D. Bruce; Resnick, Paul J.; Finnegan, Patrick S.; ...

2015-01-01

A complementary metal oxide semiconductor (CMOS) compatible version of membrane projection lithography (MPL) for fabrication of micrometer-scale three-dimensional structures is presented. The approach uses all inorganic materials and standard CMOS processing equipment. In a single layer, MPL is capable of creating all 5 2D-Bravais lattices. Furthermore, standard semiconductor processing steps can be used in a layer-by-layer approach to create fully three dimensional structures with any of the 14 3D-Bravais lattices. The unit cell basis is determined by the projection of the membrane pattern, with many degrees of freedom for defining functional inclusions. Here we demonstrate several unique structural motifs, andmore » characterize 2D arrays of unit cells with split ring resonators in a silicon matrix. The structures exhibit strong polarization dependent resonances and, for properly oriented split ring resonators (SRRs), coupling to the magnetic field of a normally incident transverse electromagnetic wave, a response unique to 3D inclusions.« less

Pelvic movement strategies and leg extension power in patients with end-stage medial compartment knee osteoarthritis: a cross-sectional study.

PubMed

Kierkegaard, Signe; Jørgensen, Peter Bo; Dalgas, Ulrik; Søballe, Kjeld; Mechlenburg, Inger

2015-09-01

During movement tasks, patients with medial compartment knee osteoarthritis use compensatory strategies to minimise the joint load of the affected leg. Movement strategies of the knees and trunk have been investigated, but less is known about movement strategies of the pelvis during advancing functional tasks, and how these strategies are associated with leg extension power. The aim of the study was to investigate pelvic movement strategies and leg extension power in patients with end-stage medial compartment knee osteoarthritis compared with controls. 57 patients (mean age 65.6 years) scheduled for medial uni-compartmental knee arthroplasty, and 29 age and gender matched controls were included in this cross-sectional study. Leg extension power was tested with the Nottingham Leg Extension Power-Rig. Pelvic range of motion was derived from an inertia-based measurement unit placed over the sacrum bone during walking, stair climbing and stepping. Patients had lower leg extension power than controls (20-39 %, P < 0.01) and used greater pelvic range of motion during stair and step ascending and descending (P ≤ 0.03, except for pelvic range of motion in the frontal plane during ascending, P > 0.06). Furthermore, an inverse association (coefficient: -0.03 to -0.04; R (2) = 13-22 %) between leg extension power and pelvic range of motion during stair and step descending was found in the patients. Compared to controls, patients with medial compartment knee osteoarthritis use greater pelvic movements during advanced functional performance tests, particularly when these involve descending tasks. Further studies should investigate if it is possible to alter these movement strategies by an intervention aimed at increasing strength and power for the patients.

Brief Report: Clustered Forward Chaining with Embedded Mastery Probes to Teach Recipe Following.

PubMed

Chazin, Kate T; Bartelmay, Danielle N; Lambert, Joseph M; Houchins-Juárez, Nealetta J

2017-04-01

This study evaluated the effectiveness of a clustered forward chaining (CFC) procedure to teach a 23-year-old male with autism to follow written recipes. CFC incorporates elements of forward chaining (FC) and total task chaining (TTC) by teaching a small number of steps (i.e., units) using TTC, introducing new units sequentially (akin to FC), and prompting through untrained steps. Results indicated that CFC was effective for teaching the participant to follow written recipes. Results maintained with therapist support for 3-5 weeks for all recipes, and maintained when therapist support was removed.

Organic-Inorganic Hybrid Materials: Multi-Functional Solids for Multi-Step Reaction Processes.

PubMed

Díaz, Urbano; Corma, Avelino

2018-03-15

The design of new hybrid materials with tailored properties at the nano-, meso-, and macro-scale, with the use of structural functional nanobuilding units, is carried out to obtain specific multi-functional materials. Organization into controlled 1D, 2D, and 3D architectures with selected functionalities is key for developing advanced catalysts, but this is hardly accomplished using conventional synthesis procedures. The use of pre-formed nanostructures, derived either from known materials or made with specific innovative synthetic methodologies, has enormous potential in the generation of multi-site catalytic materials for one-pot processes. The present concept article introduces a new archetype wherein self-assembled nanostructured builder units are the base for the design of multifunctional catalysts, which combine catalytic efficiency with fast reactant and product diffusion. The article addresses a new generation of versatile hybrid organic-inorganic multi-site catalytic materials for their use in the production of (chiral) high-added-value products within the scope of chemicals and fine chemicals production. The use of those multi-reactive solids for more nanotechnological applications, such as sensors, due to the inclusion of electron donor-acceptor structural arrays is also considered, together with the adsorption-desorption capacities due to the combination of hydrophobic and hydrophilic sub-domains. The innovative structured hybrid materials for multipurpose processes here considered, can allow the development of multi-stage one-pot reactions with industrial applications, using the materials as one nanoreactor systems, favoring more sustainable production pathways with economic, environmental and energetic advantages. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Diode step stress program for JANTX1N5615

NASA Technical Reports Server (NTRS)

1979-01-01

The effect of power/temperature step stress when applied to the switching diode JANTX1N5615 manufactured by Semtech and Micro semiconductor was examined. A total of 48 samples from each manufacturer were submitted to the process. In addition, two control sample units were maintained for verification of the electrical parametric testing. All test samples were subjected to the electrical tests after completing the prior power/temperature step stress point. Results are presented.

22 CFR 1103.160 - Communications.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Communications. 1103.160 Section 1103.160 Foreign Relations INTERNATIONAL BOUNDARY AND WATER COMMISSION, UNITED STATES AND MEXICO, UNITED STATES... Communications. (a) The agency shall take appropriate steps to ensure effective communication with applicants...

To prohibit the use of drones to kill citizens of the United States within the United States.

THOMAS, 113th Congress

Rep. Ribble, Reid J. [R-WI-8

2013-03-18

House - 04/15/2013 Referred to the Subcommittee on Crime, Terrorism, Homeland Security, And Investigations. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Practical Procedures for Internationalizing an Academic Unit.

ERIC Educational Resources Information Center

Hughes, Gail

Procedures for internationalizing a college academic unit are examined. The approach centers around eight key steps in organizational development: developing organizational support groups; assessing the international/intercultural needs of the organization; making maximum use of existing strengths and international resources; developing programs…

22 CFR 1103.160 - Communications.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 2 2014-04-01 2014-04-01 false Communications. 1103.160 Section 1103.160 Foreign Relations INTERNATIONAL BOUNDARY AND WATER COMMISSION, UNITED STATES AND MEXICO, UNITED STATES... Communications. (a) The agency shall take appropriate steps to ensure effective communication with applicants...

22 CFR 1103.160 - Communications.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Communications. 1103.160 Section 1103.160 Foreign Relations INTERNATIONAL BOUNDARY AND WATER COMMISSION, UNITED STATES AND MEXICO, UNITED STATES... Communications. (a) The agency shall take appropriate steps to ensure effective communication with applicants...

Building America's Industrial Revolution: The Boott Cotton Mills of Lowell, Massachusetts. Teaching with Historic Places.

ERIC Educational Resources Information Center

Stowell, Stephen

1995-01-01

Presents a high school unit about the U.S. Industrial Revolution featuring the Boott Cotton Mills of Lowell, Massachusetts. Includes student objectives, step-by-step instructional procedures, and discussion questions. Provides two maps, five illustrations, one photograph, and three student readings. (ACM)

Voicing Support for the Arts.

ERIC Educational Resources Information Center

Arts Midwest, Minneapolis, MN.

This report proposes 40 specific steps that can be taken to strengthen arts advocacy efforts in the region of the United States. Some steps can be taken immediately; others may take time to realize. There are five primary areas of recommended activities in this strategy, with simple "how to get started" instructions: (1)…

Learning, Teaching and Assessing Dance in Physical Education

ERIC Educational Resources Information Center

El-Sherif, Jennifer L.

2016-01-01

Many physical educators have limited dance experience and may lack the skills, knowledge and confidence to teach dance in their school programs. Yet, including dance units in physical education curriculums can provide positive experiences for students who may not enjoy traditional instruction. This article provides step-by-step instructions for…

Application of Athletic Movement Tests that Predict Injury Risk in a Military Population: Development of Normative Data.

PubMed

Teyhen, Deydre S; Shaffer, Scott W; Butler, Robert J; Goffar, Stephen L; Kiesel, Kyle B; Rhon, Daniel I; Boyles, Robert E; McMillian, Daniel J; Williamson, Jared N; Plisky, Phillip J

2016-10-01

Performance on movement tests helps to predict injury risk in a variety of physically active populations. Understanding baseline measures for normal is an important first step. Determine differences in physical performance assessments and describe normative values for these tests based on military unit type. Assessment of power, balance, mobility, motor control, and performance on the Army Physical Fitness Test were assessed in a cohort of 1,466 soldiers. Analysis of variance was performed to compare the results based on military unit type (Rangers, Combat, Combat Service, and Combat Service Support) and analysis of covariance was performed to determine the influence of age and gender. Rangers performed the best on all performance and fitness measures (p < 0.05). Combat soldiers performed better than Combat Service and Service Support soldiers on several physical performance tests and the Army Physical Fitness Test (p < 0.05). Performance in Combat Service and Service Support soldiers was equivalent on most measures (p < 0.05). Functional performance and level of fitness varied significantly by military unit type. Understanding these differences will provide a foundation for future injury prediction and prevention strategies. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

Ex situ investigation of the step bunching on crystal surfaces by atomic force microscopy

NASA Astrophysics Data System (ADS)

Krasinski, Mariusz J.

1997-07-01

We are describing ex situ observation of step bunching on the surfaces of solution grown potassium dihydrogen phosphate (KDP) and sodium chlorate monocrystals. The measurements have been done with the use of atomic force microscope. The use of this equipment allowed us to see directly the structure of macrosteps. Observation confirmed the existence of step pinning which is one of the proposed mechanisms of step bunching. Despite the very high resolution of AFM it was not possible to determine the nature of pinning point. The monatomic steps on KDP and sodium chlorate crystal surfaces are mainly one unit cell high what seems to be the result of the steps pairing. The origin of observed step pattern is discussed in frames of existing theories.

Postural adjustment errors reveal deficits in inhibition during lateral step initiation in older adults

PubMed Central

Fuhrman, Susan I.; Redfern, Mark S.; Jennings, J. Richard; Perera, Subashan; Nebes, Robert D.; Furman, Joseph M.

2013-01-01

Postural dual-task studies have demonstrated effects of various executive function components on gait and postural control in older adults. The purpose of the study was to explore the role of inhibition during lateral step initiation. Forty older adults participated (range 70–94 yr). Subjects stepped to the left or right in response to congruous and incongruous visual cues that consisted of left and right arrows appearing on left or right sides of a monitor. The timing of postural adjustments was identified by inflection points in the vertical ground reaction forces (VGRF) measured separately under each foot. Step responses could be classified into preferred and nonpreferred step behavior based on the number of postural adjustments that were made. Delays in onset of the first postural adjustment (PA1) and liftoff (LO) of the step leg during preferred steps progressively increased among the simple, choice, congruous, and incongruous tasks, indicating interference in processing the relevant visuospatial cue. Incongruous cues induced subjects to make more postural adjustments than they typically would (i.e., nonpreferred steps), representing errors in selection of the appropriate motor program. During these nonpreferred steps, the onset of the PA1 was earlier than during the preferred steps, indicating a failure to inhibit an inappropriate initial postural adjustment. The functional consequence of the additional postural adjustments was a delay in the LO compared with steps in which they did not make an error. These results suggest that deficits in inhibitory function may detrimentally affect step decision processing, by delaying voluntary step responses. PMID:23114211

Treatment of burns in the first 24 hours: simple and practical guide by answering 10 questions in a step-by-step form

PubMed Central

2012-01-01

Residents in training, medical students and other staff in surgical sector, emergency room (ER) and intensive care unit (ICU) or Burn Unit face a multitude of questions regarding burn care. Treatment of burns is not always straightforward. Furthermore, National and International guidelines differ from one region to another. On one hand, it is important to understand pathophysiology, classification of burns, surgical treatment, and the latest updates in burn science. On the other hand, the clinical situation for treating these cases needs clear guidelines to cover every single aspect during the treatment procedure. Thus, 10 questions have been organised and discussed in a step-by-step form in order to achieve the excellence of education and the optimal treatment of burn injuries in the first 24 hours. These 10 questions will clearly discuss referral criteria to the burn unit, primary and secondary survey, estimation of the total burned surface area (%TBSA) and the degree of burns as well as resuscitation process, routine interventions, laboratory tests, indications of Bronchoscopy and special considerations for Inhalation trauma, immediate consultations and referrals, emergency surgery and admission orders. Understanding and answering the 10 questions will not only cover the management process of Burns during the first 24 hours but also seems to be an interactive clear guide for education purpose. PMID:22583548

To deny admission to the United States to any representative to the United Nations who has engaged in espionage activities against the United States, poses a threat to United States national security interests, or has engaged in a terrorist activity against the United States.

THOMAS, 113th Congress

Rep. Lamborn, Doug [R-CO-5

2014-04-01

House - 04/16/2014 Referred to the Subcommittee on Immigration and Border Security. (All Actions) Notes: For further action, see S.2195, which became Public Law 113-100 on 4/18/2014. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Risk Based Reliability Centered Maintenance of DOD Fire Protection Systems

DTIC Science & Technology

1999-01-01

2.2.3 Failure Mode and Effect Analysis ( FMEA )............................ 2.2.4 Failure Mode Risk Characterization...Step 2 - System functions and functional failures definition Step 3 - Failure mode and effect analysis ( FMEA ) Step 4 - Failure mode risk...system). The Interface Location column identifies the location where the FMEA of the fire protection system began or stopped. For example, for the fire

Exploring the Relationships Between USMLE Performance and Disciplinary Action in Practice: A Validity Study of Score Inferences From a Licensure Examination.

PubMed

Cuddy, Monica M; Young, Aaron; Gelman, Andrew; Swanson, David B; Johnson, David A; Dillon, Gerard F; Clauser, Brian E

2017-12-01

Physicians must pass the United States Medical Licensing Examination (USMLE) to obtain an unrestricted license to practice allopathic medicine in the United States. Little is known, however, about how well USMLE performance relates to physician behavior in practice, particularly conduct inconsistent with safe, effective patient care. The authors examined the extent to which USMLE scores relate to the odds of receiving a disciplinary action from a U.S. state medical board. Controlling for multiple factors, the authors used non-nested multilevel logistic regression analyses to estimate the relationships between scores and receiving an action. The sample included 164,725 physicians who graduated from U.S. MD-granting medical schools between 1994 and 2006. Physicians had a mean Step 1 score of 214 (standard deviation [SD] = 21) and a mean Step 2 Clinical Knowledge (CK) score of 213 (SD = 23). Of the physicians, 2,205 (1.3%) received at least one action. Physicians with higher Step 2 CK scores had lower odds of receiving an action. A 1-SD increase in Step 2 CK scores corresponded to a decrease in the chance of disciplinary action by roughly 25% (odds ratio = 0.75; 95% CI = 0.70-0.80). After accounting for Step 2 CK scores, Step 1 scores were unrelated to the odds of receiving an action. USMLE Step 2 CK scores provide useful information about the odds a physician will receive an official sanction for problematic practice behavior. These results provide validity evidence supporting current interpretation and use of Step 2 CK scores.

Airspace Operations Demo Functional Requirements Matrix

NASA Technical Reports Server (NTRS)

2005-01-01

The Flight IPT assessed the reasonableness of demonstrating each of the Access 5 Step 1 functional requirements. The functional requirements listed in this matrix are from the September 2005 release of the Access 5 Functional Requirements Document. The demonstration mission considered was a notional Western US mission (WUS). The conclusion of the assessment is that 90% of the Access 5 Step 1 functional requirements can be demonstrated using the notional Western US mission.

Introduction to Density Functional Theory: Calculations by Hand on the Helium Atom

ERIC Educational Resources Information Center

Baseden, Kyle A.; Tye, Jesse W.

2014-01-01

Density functional theory (DFT) is a type of electronic structure calculation that has rapidly gained popularity. In this article, we provide a step-by-step demonstration of a DFT calculation by hand on the helium atom using Slater's X-Alpha exchange functional on a single Gaussian-type orbital to represent the atomic wave function. This DFT…

Room-temperature current blockade in atomically defined single-cluster junctions

NASA Astrophysics Data System (ADS)

Lovat, Giacomo; Choi, Bonnie; Paley, Daniel W.; Steigerwald, Michael L.; Venkataraman, Latha; Roy, Xavier

2017-11-01

Fabricating nanoscopic devices capable of manipulating and processing single units of charge is an essential step towards creating functional devices where quantum effects dominate transport characteristics. The archetypal single-electron transistor comprises a small conducting or semiconducting island separated from two metallic reservoirs by insulating barriers. By enabling the transfer of a well-defined number of charge carriers between the island and the reservoirs, such a device may enable discrete single-electron operations. Here, we describe a single-molecule junction comprising a redox-active, atomically precise cobalt chalcogenide cluster wired between two nanoscopic electrodes. We observe current blockade at room temperature in thousands of single-cluster junctions. Below a threshold voltage, charge transfer across the junction is suppressed. The device is turned on when the temporary occupation of the core states by a transiting carrier is energetically enabled, resulting in a sequential tunnelling process and an increase in current by a factor of ∼600. We perform in situ and ex situ cyclic voltammetry as well as density functional theory calculations to unveil a two-step process mediated by an orbital localized on the core of the cluster in which charge carriers reside before tunnelling to the collector reservoir. As the bias window of the junction is opened wide enough to include one of the cluster frontier orbitals, the current blockade is lifted and charge carriers can tunnel sequentially across the junction.

Spire-type actin nucleators cooperate with Formin-2 to drive asymmetric oocyte division.

PubMed

Pfender, Sybille; Kuznetsov, Vitaliy; Pleiser, Sandra; Kerkhoff, Eugen; Schuh, Melina

2011-06-07

Oocytes mature into eggs by extruding half of their chromosomes in a small cell termed the polar body. Asymmetric oocyte division is essential for fertility [1], but despite its importance, little is known about its mechanism. In mammals, the meiotic spindle initially forms close to the center of the oocyte. Thus, two steps are required for asymmetric meiotic division: first, asymmetric spindle positioning and second, polar body extrusion. Here, we identify Spire1 and Spire2 as new key factors in asymmetric division of mouse oocytes. Spire proteins are novel types of actin nucleators that drive nucleation of actin filaments with their four WH2 actin-binding domains [2-6]. We show that Spire1 and Spire2 first mediate asymmetric spindle positioning by assembling an actin network that serves as a substrate for spindle movement. Second, they drive polar body extrusion by promoting assembly of the cleavage furrow. Our data suggest that Spire1 and Spire2 cooperate with Formin-2 (Fmn2) to nucleate actin filaments in mouse oocytes and that both types of nucleators act as a functional unit. This study not only reveals how Spire1 and Spire2 drive two critical steps of asymmetric oocyte division, but it also uncovers the first physiological function of Spire-type actin nucleators in vertebrates. Copyright © 2011 Elsevier Ltd. All rights reserved.

Atopy, but not obesity is associated with asthma severity among children with persistent asthma.

PubMed

Lu, Kim D; Phipatanakul, Wanda; Perzanowski, Matthew S; Balcer-Whaley, Susan; Matsui, Elizabeth C

2016-12-01

Obesity is associated with an increased risk of asthma in children. Atopic sensitization is a major risk factor for asthma including severe asthma in children. It is unclear if obesity is associated with worse asthma control or severity in children and how its effects compare to atopy. We sought to examine relationships of weight status and atopy to asthma control and severity among a population of predominantly low income, minority children and adolescents with persistent asthma. A cross-sectional analysis of 832 children and adolescents, age range 5-17 years, with persistent asthma was performed. Clinical assessments included asthma questionnaires of symptoms, asthma severity score, health care utilization and medication treatment step, lung function testing, and skin prick testing as well as measures of adiposity. Data were collected between December 2010 and August 2014 from Johns Hopkins Hospital in Baltimore, MD and Children's Hospital of Boston, MA. Obesity was not associated with worse asthma control or severity in this group of predominantly low income, minority children and adolescents with persistent asthma. However, a greater degree of atopy was associated with lower lung function, higher asthma severity score, and higher medication treatment step. Atopy may be a more important risk factor for asthma severity than obesity among low-income minority children and adolescents with persistent asthma living in Northeastern cities in the United States.

Qualification test unit slide stainer (Beckman P/N 673753)

NASA Technical Reports Server (NTRS)

Bernier, P. S.

1972-01-01

Specifications for a slide stainer unit for the Skylab program are presented. The qualification test slide stainer was designed to be a self-contained system capable of performing an eight-step Gram stain of microorganisms and a Wright's stain of blood smears.

30 CFR 250.1156 - What steps must I take to receive approval to produce within 500 feet of a unit or lease line?

Code of Federal Regulations, 2010 CFR

2010-07-01

... produce within 500 feet of a unit or lease line? 250.1156 Section 250.1156 Mineral Resources MINERALS... I take to receive approval to produce within 500 feet of a unit or lease line? (a) You must obtain... any portion of the completed interval less than 500 feet from a unit or lease line. Submit to MMS the...

Proposing an amendment to the Constitution of the United States to prohibit the President from entering into a treaty or other international agreement that would provide for the United States to adopt as legal tender in the United States a currency issued by an entity other than the United States.

THOMAS, 111th Congress

Rep. Bachmann, Michele [R-MN-6

2009-03-25

House - 04/27/2009 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Methods, systems and devices for detecting and locating ferromagnetic objects

DOEpatents

Roybal, Lyle Gene [Idaho Falls, ID; Kotter, Dale Kent [Shelley, ID; Rohrbaugh, David Thomas [Idaho Falls, ID; Spencer, David Frazer [Idaho Falls, ID

2010-01-26

Methods for detecting and locating ferromagnetic objects in a security screening system. One method includes a step of acquiring magnetic data that includes magnetic field gradients detected during a period of time. Another step includes representing the magnetic data as a function of the period of time. Another step includes converting the magnetic data to being represented as a function of frequency. Another method includes a step of sensing a magnetic field for a period of time. Another step includes detecting a gradient within the magnetic field during the period of time. Another step includes identifying a peak value of the gradient detected during the period of time. Another step includes identifying a portion of time within the period of time that represents when the peak value occurs. Another step includes configuring the portion of time over the period of time to represent a ratio.

Inversion Analysis of Postseismic Deformation in Poroelastic Material Using Finite Element Method

NASA Astrophysics Data System (ADS)

Kawamoto, S.; Ito, T.; Hirahara, K.

2005-12-01

Following a large earthquake, postseismic deformations in the focal source region have been observed by several geodetic measurements. To explain the postseismic deformations, researchers have proposed some physical mechanisms known as afterslip, viscoelastic relaxation and poroelastic rebound. There are a number of studies about postseismic deformations but for poroelastic rebound. So, we calculated the postseismic deformations caused by afterslip and poroelastic rebound using modified FEM code _eCAMBIOT3D_f originally developed by Geotech. Lab. Gunma University, Japan (2003). The postseismic deformations caused by both afterslip and poroelastic rebound are characteristically different from those caused only by afterslip. This suggests that the slip distributions on the fault estimated from geodetic measurements also change. Because of this, we developed the inversion method that accounts for both afterslip and poroelastic rebound using FEM to estimate the difference of slip distributions on the fault quantitatively. The inversion analysis takes following steps. First, we calculate the coseismic and postseismic response functions on each fault segment induced by the unit slip. Where postseismic response function indicate the poroelastic rebound. Next, we make the observation equations at each time step using the response functions and estimate the spatiotemporal distribution of slip on the fault. In solving this inverse problem, we assume the slip distributions on the fault are smooth in space and time except for rapid change (coseismic change). Because the hyperparameters that control the smoothness of spatial and temporal distributions of slip are needed, we determine the best hyperparameters using ABIC. In this presentation, we introduce the example of analysis results using this method.

A Review of Organ Transplantation: Heart, Lung, Kidney, Liver, and Simultaneous Liver-Kidney.

PubMed

Scheuher, Cynthia

2016-01-01

Heart, lung, kidney, liver, and simultaneous liver-kidney transplants share many features. They all follow the same 7-step process, the same 3 immunosuppressant medications, and the same reason for organ transplantation. Organs are transplanted because of organ failure. The similarities end there. Each organ has its unique causes for failure. Each organ also has its own set of criteria that must be met prior to transplantation. Simultaneous liver-kidney transplant criteria vary per transplant center but are similar in nature. Both the criteria required and the 7-step process are described by the United Network of Organ Sharing, which is a private, nonprofit organization, under contract with the US Department of Health and Human Services. Its function is to increase the number of transplants, improve survival rates after transplantation, promote safe transplant practices, and endorse efficiency. The purpose of this article is to review the reasons transplant is needed, specifically heart, lung, kidney, liver, and simultaneous liver-kidney, and a brief overview of the transplant process including criteria used, contraindications, and medications prescribed.

Towards quality by design in pharmaceutical manufacturing: modelling and control of air jet mills

NASA Astrophysics Data System (ADS)

Bhonsale, Satyajeet; Telen, Dries; Stokbroekx, Bard; Van Impe, Jan

2017-06-01

Milling is an important step in pharmaceutical manufacturing as it not only determines the final formulation of the drug product, but also influences the bioavailability and dissolution rate of the active pharmaceutical ingredient (API). In this respect, the air jet mill (AJM) is most commonly used in the pharmaceutical industry as it is a non-contaminating and non-degrading self-classifying process capable of delivering narrow particle size distributions (PSD). Keeping the principles of Quality by Design in mind, the Critical Process Parameters (CPPs) of the AJM have been identified to be the pressures at the grinding nozzles, and the feed rate which affect the PSD, surface charge and the morphology of the product (i.e. the Critical Material Attributes (CMAs)). For the purpose of this research, the PSD is considered to be the only relevant CMA. A population balance based model is proposed to simulate the dynamics milling operation by utilizing the concept of breakage functions. This model agrees qualitatively with experimental observations of the air jet mill unit present at Janssen Pharmaceutica but further steps for model validation need to be carried out.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendonça, João M.; Grimm, Simon L.; Grosheintz, Luc

We have designed and developed, from scratch, a global circulation model (GCM) named THOR that solves the three-dimensional nonhydrostatic Euler equations. Our general approach lifts the commonly used assumptions of a shallow atmosphere and hydrostatic equilibrium. We solve the “pole problem” (where converging meridians on a sphere lead to increasingly smaller time steps near the poles) by implementing an icosahedral grid. Irregularities in the grid, which lead to grid imprinting, are smoothed using the “spring dynamics” technique. We validate our implementation of spring dynamics by examining calculations of the divergence and gradient of test functions. To prevent the computational timemore » step from being bottlenecked by having to resolve sound waves, we implement a split-explicit method together with a horizontally explicit and vertically implicit integration. We validate our GCM by reproducing the Earth and hot-Jupiter-like benchmark tests. THOR was designed to run on graphics processing units (GPUs), which allows for physics modules (radiative transfer, clouds, chemistry) to be added in the future, and is part of the open-source Exoclimes Simulation Platform (www.exoclime.org).« less

Magnetization reversal modes in fourfold Co nano-wire systems

NASA Astrophysics Data System (ADS)

Blachowicz, T.; Ehrmann, A.

2015-09-01

Magnetic nano-wire systems are, as well as other patterned magnetic structures, of special interest for novel applications, such as magnetic storage media. In these systems, the coupling between neighbouring magnetic units is most important for the magnetization reversal process of the complete system, leading to a variety of magnetization reversal mechanisms. This article examines the influence of the magnetic material on hysteresis loop shape, coercive field, and magnetization reversal modes. While iron nano-wire systems exhibit flat or one-step hysteresis loops, systems consisting of cobalt nano-wires show hysteresis loops with several longitudinal steps and transverse peaks, correlated to a rich spectrum of magnetization reversal mechanisms. We show that changing the material parameters while the system geometry stays identical can lead to completely different hysteresis loops and reversal modes. Thus, especially for finding magnetic nano-systems which can be used as quaternary or even higher-order storage devices, it is rational to test several materials for the planned systems. Apparently, new materials may lead to novel and unexpected behaviour - and can thus result in novel functionalities.

Computer Oriented Exercises on Attitudes and U.S. Gasoline Consumption, Attitude. Teacher Guide. Computer Technology Program Environmental Education Units.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This is the teacher's guide to accompany the student guide which together comprise one of five computer-oriented environmental/energy education units. This unit is concerned with the attitude of people toward gasoline shortages and different steps the government could take to reduce gasoline consumption. Through the exercises, part of which make…

A Short Guide to U.S. Arms Control Policy.

ERIC Educational Resources Information Center

Howard, Norman, Ed.; Sussman, Colleen, Ed.

Steps the United States is taking to lessen the danger of war while building international confidence and security are described. The commitment of the United States to arms control is based on the conviction that the United States and the Soviet Union have a common interest in the avoidance of nuclear war and the survival of the human race. A…

Complex-valued multistate associative memory with nonlinear multilevel functions for gray-level image reconstruction.

PubMed

Tanaka, Gouhei; Aihara, Kazuyuki

2009-09-01

A widely used complex-valued activation function for complex-valued multistate Hopfield networks is revealed to be essentially based on a multilevel step function. By replacing the multilevel step function with other multilevel characteristics, we present two alternative complex-valued activation functions. One is based on a multilevel sigmoid function, while the other on a characteristic of a multistate bifurcating neuron. Numerical experiments show that both modifications to the complex-valued activation function bring about improvements in network performance for a multistate associative memory. The advantage of the proposed networks over the complex-valued Hopfield networks with the multilevel step function is more outstanding when a complex-valued neuron represents a larger number of multivalued states. Further, the performance of the proposed networks in reconstructing noisy 256 gray-level images is demonstrated in comparison with other recent associative memories to clarify their advantages and disadvantages.

An Internet-Mediated Pedometer-Based Program Improves Health-Related Quality-of-Life Domains and Daily Step Counts in COPD

PubMed Central

Moy, Marilyn L.; Collins, Riley J.; Martinez, Carlos H.; Kadri, Reema; Roman, Pia; Holleman, Robert G.; Kim, Hyungjin Myra; Nguyen, Huong Q.; Cohen, Miriam D.; Goodrich, David E.; Giardino, Nicholas D.

2015-01-01

BACKGROUND: Low levels of physical activity (PA) are associated with poor outcomes in people with COPD. Interventions to increase PA could improve outcomes. METHODS: We tested the efficacy of a novel Internet-mediated, pedometer-based exercise intervention. Veterans with COPD (N = 239) were randomized in a 2:1 ratio to the (1) intervention group (Omron HJ-720 ITC pedometer and Internet-mediated program) or (2) wait-list control group (pedometer). The primary outcome was health-related quality of life (HRQL), assessed by the St. George’s Respiratory Questionnaire (SGRQ), at 4 months. We examined the SGRQ total score (SGRQ-TS) and three domain scores: Symptoms, Activities, and Impact. The secondary outcome was daily step counts. Linear regression models assessed the effect of intervention on outcomes. RESULTS: Participants had a mean age of 67 ± 9 years, and 94% were men. There was no significant between-group difference in mean 4-month SGRQ-TS (2.3 units, P = .14). Nevertheless, a significantly greater proportion of intervention participants than control subjects had at least a 4-unit improvement in SGRQ-TS, the minimum clinically important difference (53% vs 39%, respectively, P = .05). For domain scores, the intervention group had a lower (reflecting better HRQL) mean than the control group by 4.6 units for Symptoms (P = .046) and by 3.3 units for Impact (P = .049). There was no significant difference in Activities score between the two groups. Compared with the control subjects, intervention participants walked 779 more steps per day at 4 months (P = .005). CONCLUSIONS: An Internet-mediated, pedometer-based walking program can improve domains of HRQL and daily step counts at 4 months in people with COPD. TRIAL REGISTRY: Clinical Trials.gov; No.: NCT01102777; URL: www.clinicaltrials.gov PMID:25811395

Target-Catalyzed DNA Four-Way Junctions for CRET Imaging of MicroRNA, Concatenated Logic Operations, and Self-Assembly of DNA Nanohydrogels for Targeted Drug Delivery.

PubMed

Bi, Sai; Xiu, Bao; Ye, Jiayan; Dong, Ying

2015-10-21

Here we report a target-catalyzed DNA four-way junction (DNA-4WJ) on the basis of toehold-mediated DNA strand displacement reaction (TM-SDR), which is readily applied in enzyme-free amplified chemiluminescence resonance energy transfer (CRET) imaging of microRNA. In this system, the introduction of target microRNA-let-7a (miR-let-7a) activates a cascade of assembly steps with four DNA hairpins, followed by a disassembly step in which the target microRNA is displaced and released from DNA-4WJ to catalyze the self-assembly of additional branched junctions. As a result, G-quadruplex subunit sequences and fluorophore fluorescein amidite (FAM) are encoded in DNA-4WJ in a close proximity, stimulating a CRET process in the presence of hemin/K(+) to form horseradish peroxidase (HRP)-mimicking DNAzyme that catalyzes the generation of luminol/H2O2 chemiluminescence (CL), which further transfers to FAM. The background signal is easily reduced using magnetic graphene oxide (MGO) to remove unreacted species through magnetic separation, which makes a great contribution to improve the detection sensitivity and achieves a detection limit as low as 6.9 fM microRNA-let-7a (miR-let-7a). In addition, four-input concatenated logic circuits with an automatic reset function have been successfully constructed relying on the architecture of the proposed DNA-4WJ. More importantly, DNA nanohydrogels are self-assembled using DNA-4WJs as building units after centrifugation, which are driven by liquid crystallization and dense packaging of building units. Moreover, the DNA nanohydrogels are readily functionalized by incorporating with aptamers, bioimaging agents, and drug loading sites, which thus are served as efficient nanocarriers for targeted drug delivery and cancer therapy with high loading capacity and excellent biocompatibility.

Development of an Inlet Pressure Sensor for Control in a Left Ventricular Assist Device

PubMed Central

Fritz, Bryan; Cysyk, Joshua; Newswanger, Ray; Weiss, William; Rosenberg, Gerson

2010-01-01

A Tesla type continuous flow left ventricular assist device (VAD) has been designed by Penn State and Advanced Bionics, Inc. (ABI). When a continuous flow device is employed, care must be taken to limit low pressures in the ventricle that can produce an obstruction to the inlet cannula or trigger arrhythmias. Design of an inexpensive, semi-conductor strain gage inlet pressure sensor to detect suction has been completed. The research and design analysis included finite element modeling of the sensing region. Sensitivity, step-response, temperature dependence and hysteresis tests have been performed on prototype units. All sensors were able to withstand the maximum expected strain of 82 μin/in at 500 mmHg internal pressure. Average sensitivity was 0.52 ±0.24 μV/mmHg with 0.5 V excitation (n=5 units). Step response time for a 0 to 90 mmHg step change averaged 22 milliseconds. Hysteresis was measured by applying and holding 75mmHg internal pressure for 4 hours, followed by a zero pressure measurement, and ranged from -15 mmHg to 4.1 mmHg (n=3 units). Offset drift varied between 180 and -140 mmHg over a four week period. (n=2 units). Span temperature sensitivity ranged from 18 to -21 μV/°C (n=5 units). Gain temperature sensitivity ranged from -7.4 to 4.9 μV/°C (n=5 units). With the inherent drift, it is currently not possible to use the transducer to measure actual pressures, but it can easily be used to measure pressure changes throughout the cardiac cycle. This signal can then be used in the control system to avoid ventricular suction events. PMID:20335797

Crystal structure of bile salt hydrolase from Lactobacillus salivarius.

PubMed

Xu, Fuzhou; Guo, Fangfang; Hu, Xiao Jian; Lin, Jun

2016-05-01

Bile salt hydrolase (BSH) is a gut-bacterial enzyme that negatively influences host fat digestion and energy harvesting. The BSH enzyme activity functions as a gateway reaction in the small intestine by the deconjugation of glycine-conjugated or taurine-conjugated bile acids. Extensive gut-microbiota studies have suggested that BSH is a key mechanistic microbiome target for the development of novel non-antibiotic food additives to improve animal feed production and for the design of new measures to control obesity in humans. However, research on BSH is still in its infancy, particularly in terms of the structural basis of BSH function, which has hampered the development of BSH-based strategies for improving human and animal health. As an initial step towards the structure-function analysis of BSH, C-terminally His-tagged BSH from Lactobacillus salivarius NRRL B-30514 was crystallized in this study. The 1.90 Å resolution crystal structure of L. salivarius BSH was determined by molecular replacement using the structure of Clostridium perfringens BSH as a starting model. It revealed this BSH to be a member of the N-terminal nucleophile hydrolase superfamily. Crystals of apo BSH belonged to space group P21212, with unit-cell parameters a = 90.79, b = 87.35, c = 86.76 Å (PDB entry 5hke). Two BSH molecules packed perfectly as a dimer in one asymmetric unit. Comparative structural analysis of L. salivarius BSH also identified potential residues that contribute to catalysis and substrate specificity.

Transistor step stress testing program for JANTX2N2905A

NASA Technical Reports Server (NTRS)

1979-01-01

The effect of power/temperature step stress when applied to the transistor JANTX2N2905A manufactured by Texas Instruments and Motorola is reported. A total of 48 samples from each manufacturer was submitted to the process outlined. In addition, two control sample units were maintained for verification of the electrical parametric testing. All test samples were subjected to the electrical tests outlined in Table 2 after completing the prior power/temperature step stress point.

Preparing The U.S. Air Force for Military Operations Other Than War,

DTIC Science & Technology

1997-01-01

Step 1: Detect and Identify WMD Facilities 70 5.5. Step 2: Neutralize WMD Facilities 71 5.6. Step 3: Conduct BDA Following Attack on...FUTURE It would generally appear that there is no way to predict whether global instability will mushroom . In any case, there is not necessarily a...serious enough problem, then the United States should do some- thing about it. Thus, policymakers often feel compelled by pubic and media pressures to

High dependency units in the UK: variable size, variable character, few in number.

PubMed Central

Thompson, F. J.; Singer, M.

1995-01-01

An exploratory descriptive survey was conducted to determine the size and character of high dependency units (HDUs) in the UK. A telephone survey and subsequent postal questionnaire was sent to the 39 general HDUs in the UK determined by a recent survey from the Royal College of Anaesthetists; replies were received from 28. Most HDUs (82%, n = 23) were geographically distinct from the intensive care unit and varied in size from three to 13 beds, although only 64% (n = 18) reported that all beds were currently open. Nurse: patient ratios were at least 1:3. Fifty per cent of units had one or more designated consultants in charge, although only 11% (n = 3) had specifically designated consultant sessions. Junior medical cover was provided mainly by the on-call speciality term. Twenty units acted as a step-down facility for discharged intensive care unit patients and 21 offered a step-up facility for patients from general wards. Provision of facilities and levels of monitoring varied between these units. Few HDUs exist in the UK and they are variable in size and in the facilities and monitoring procedures which they provide. Future studies are urgently required to determine cost-effectiveness and outcome benefit of this intermediate care facility. Images p221-a PMID:7784281

High dependency units in the UK: variable size, variable character, few in number.

PubMed

Thompson, F J; Singer, M

1995-04-01

An exploratory descriptive survey was conducted to determine the size and character of high dependency units (HDUs) in the UK. A telephone survey and subsequent postal questionnaire was sent to the 39 general HDUs in the UK determined by a recent survey from the Royal College of Anaesthetists; replies were received from 28. Most HDUs (82%, n = 23) were geographically distinct from the intensive care unit and varied in size from three to 13 beds, although only 64% (n = 18) reported that all beds were currently open. Nurse: patient ratios were at least 1:3. Fifty per cent of units had one or more designated consultants in charge, although only 11% (n = 3) had specifically designated consultant sessions. Junior medical cover was provided mainly by the on-call speciality term. Twenty units acted as a step-down facility for discharged intensive care unit patients and 21 offered a step-up facility for patients from general wards. Provision of facilities and levels of monitoring varied between these units. Few HDUs exist in the UK and they are variable in size and in the facilities and monitoring procedures which they provide. Future studies are urgently required to determine cost-effectiveness and outcome benefit of this intermediate care facility.

Effectiveness of a Very Early Stepping Verticalization Protocol in Severe Acquired Brain Injured Patients: A Randomized Pilot Study in ICU

PubMed Central

Bonini, Sara; Maffia, Sara; Molatore, Katia; Sebastianelli, Luca; Zarucchi, Alessio; Matteri, Diana; Ercoli, Giuseppe; Maestri, Roberto

2016-01-01

Background and Objective Verticalization was reported to improve the level of arousal and awareness in patients with severe acquired brain injury (ABI) and to be safe in ICU. We evaluated the effectiveness of a very early stepping verticalization protocol on their functional and neurological outcome. Methods Consecutive patients with Vegetative State or Minimally Conscious State were enrolled in ICU on the third day after an ABI. They were randomized to undergo conventional physiotherapy alone or associated to fifteen 30-minute sessions of verticalization, using a tilt table with robotic stepping device. Once stabilized, patients were transferred to our Neurorehabilitation unit for an individualized treatment. Outcome measures (Glasgow Coma Scale, Coma Recovery Scale revised -CRSr-, Disability Rating Scale–DRS- and Levels of Cognitive Functioning) were assessed on the third day from the injury (T0), at ICU discharge (T1) and at Rehab discharge (T2). Between- and within-group comparisons were performed by the Mann-Whitney U test and Wilcoxon signed-rank test, respectively. Results Of the 40 patients enrolled, 31 completed the study without adverse events (15 in the verticalization group and 16 in the conventional physiotherapy). Early verticalization started 12.4±7.3 (mean±SD) days after ABI. The length of stay in ICU was longer for the verticalization group (38.8 ± 15.7 vs 25.1 ± 11.2 days, p = 0.01), while the total length of stay (ICU+Neurorehabilitation) was not significantly different (153.2 ± 59.6 vs 134.0 ± 61.0 days, p = 0.41). All outcome measures significantly improved in both groups after the overall period (T2 vs T0, p<0.001 all), as well as after ICU stay (T1 vs T0, p<0.004 all) and after Neurorehabilitation (T2 vs T1, p<0.004 all). The improvement was significantly better in the experimental group for CRSr (T2-T0 p = 0.033, T1-T0 p = 0.006) and (borderline) for DRS (T2-T0 p = 0.040, T1-T0 p = 0.058). Conclusions A stepping verticalization protocol, started since the acute stages, improves the short-term and long-term functional and neurological outcome of ABI patients. Trial Registration clinicaltrials.gov NCT02828371 PMID:27447483

Effectiveness of a Very Early Stepping Verticalization Protocol in Severe Acquired Brain Injured Patients: A Randomized Pilot Study in ICU.

PubMed

Frazzitta, Giuseppe; Zivi, Ilaria; Valsecchi, Roberto; Bonini, Sara; Maffia, Sara; Molatore, Katia; Sebastianelli, Luca; Zarucchi, Alessio; Matteri, Diana; Ercoli, Giuseppe; Maestri, Roberto; Saltuari, Leopold

2016-01-01

Verticalization was reported to improve the level of arousal and awareness in patients with severe acquired brain injury (ABI) and to be safe in ICU. We evaluated the effectiveness of a very early stepping verticalization protocol on their functional and neurological outcome. Consecutive patients with Vegetative State or Minimally Conscious State were enrolled in ICU on the third day after an ABI. They were randomized to undergo conventional physiotherapy alone or associated to fifteen 30-minute sessions of verticalization, using a tilt table with robotic stepping device. Once stabilized, patients were transferred to our Neurorehabilitation unit for an individualized treatment. Outcome measures (Glasgow Coma Scale, Coma Recovery Scale revised -CRSr-, Disability Rating Scale-DRS- and Levels of Cognitive Functioning) were assessed on the third day from the injury (T0), at ICU discharge (T1) and at Rehab discharge (T2). Between- and within-group comparisons were performed by the Mann-Whitney U test and Wilcoxon signed-rank test, respectively. Of the 40 patients enrolled, 31 completed the study without adverse events (15 in the verticalization group and 16 in the conventional physiotherapy). Early verticalization started 12.4±7.3 (mean±SD) days after ABI. The length of stay in ICU was longer for the verticalization group (38.8 ± 15.7 vs 25.1 ± 11.2 days, p = 0.01), while the total length of stay (ICU+Neurorehabilitation) was not significantly different (153.2 ± 59.6 vs 134.0 ± 61.0 days, p = 0.41). All outcome measures significantly improved in both groups after the overall period (T2 vs T0, p<0.001 all), as well as after ICU stay (T1 vs T0, p<0.004 all) and after Neurorehabilitation (T2 vs T1, p<0.004 all). The improvement was significantly better in the experimental group for CRSr (T2-T0 p = 0.033, T1-T0 p = 0.006) and (borderline) for DRS (T2-T0 p = 0.040, T1-T0 p = 0.058). A stepping verticalization protocol, started since the acute stages, improves the short-term and long-term functional and neurological outcome of ABI patients. clinicaltrials.gov NCT02828371.

One-dimensional ordering of Ge nanoclusters along atomically straight steps of Si(111)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sekiguchi, Takeharu; Yoshida, Shunji; Itoh, Kohei M.

2007-01-01

Ge nanostructures grown by molecular beam epitaxy on a vicinal Si(111) surface with atomically well-defined steps are studied by means of scanning tunneling microscopy and spectroscopy. When the substrate temperature during deposition is around 250 degree sign C, Ge nanoclusters of diameters less than 2.0 nm form a one-dimensional array of the periodicity 2.7 nm along each step. This self-organization is due to preferential nucleation of Ge on the unfaulted 7x7 half-unit cells at the upper step edges. Scanning tunneling spectroscopy reveals localized electronic states of the nanoclusters.

ARES: automated response function code. Users manual. [HPGAM and LSQVM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maung, T.; Reynolds, G.M.

This ARES user's manual provides detailed instructions for a general understanding of the Automated Response Function Code and gives step by step instructions for using the complete code package on a HP-1000 system. This code is designed to calculate response functions of NaI gamma-ray detectors, with cylindrical or rectangular geometries.

Working with Young Adults. NIACE Lifelines in Adult Learning.

ERIC Educational Resources Information Center

Jackson, Carol

This document explains how adult educators and others in the United Kingdom can increase levels of participation and achievement in learning for young adults by providing informal learning opportunities for those young people who are least inclined to participate in formal education and training programs. The guide outlines a step-by-step approach…

Developing an Integrated Library Program. Professional Growth Series.

ERIC Educational Resources Information Center

Miller, Donna P.; Anderson, J'Lynn

This book provides teachers, media specialists, and administrators with a step-by-step method for integrating library resources and skills into the classroom curriculum. In this method, all curriculum areas are integrated into major units of study that are team-planned, team-produced, and team-taught. Topics include: components of the program and…

Coupling Admissions and Curricular Data to Predict Medical Student Outcomes

ERIC Educational Resources Information Center

Sesate, Diana B.; Milem, Jeffrey F.; McIntosh, Kadian L.; Bryan, W. Patrick

2017-01-01

The relative impact of admissions factors and curricular measures on the first medical licensing exam (United States Medical Licensing Exam [USMLE] Step 1) scores is examined. The inclusion of first-year and second-year curricular measures nearly doubled the variance explained in Step 1 scores from the amount explained by the combination of…

Managing Staff Development in Adult and Community Learning: Reflection to Practice.

ERIC Educational Resources Information Center

Ewens, David

This document is intended to assist individuals responsible for managing staff development in adult and community learning (ACL) in the United Kingdom. The guide presents step-by-step advice for designing and implementing an approach based on the belief that staff development should do the following things: (1) relate holistically to the…

Chemistry Cook-Off

ERIC Educational Resources Information Center

McCormick, Cynthia

2012-01-01

For this activity, high school chemistry students compete in a cooking contest. They must determine the chemical and physical changes that occur in the food they prepare, present their recipe as a step-by-step procedure similar to a lab procedure, identify chemicals in the food, and present all measurements in both metric and English units. The…

Step-doubling at Vicinal Ni(111) Surfaces Investigated with a Curved Crystal

DOE PAGES

Ilyn, Max; Magana, Ana; Walter, Andrew Leigh; ...

2017-01-25

Here, vicinal surfaces may undergo structural transformations as a function of temperature or in the presence of adsorbates. Step-doubling, in which monatomic steps pair up forming double-atom high staircases, is the simplest example. Here we investigate the case of Ni(111) using a curved crystal surface, which allows us to explore the occurrence of step-doubling as a function of temperature and vicinal plane (miscut α and step type). We find a striking A-type ({100}-like microfacets) versus B-type ({111}-like) asymmetry towards step-doubling. The terrace-width distribution analysis performed from Scanning Tunneling Microscopy data points to elastic step interactions overcoming entropic effects at verymore » small miscut α in A-type vicinals, as compared to B-type steps. For A-type vicinals, we elaborate the temperature/miscut phase diagram, on which we establish a critical miscut α c = 9.3° for step-doubling to take place.« less

Step-doubling at Vicinal Ni(111) Surfaces Investigated with a Curved Crystal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ilyn, Max; Magana, Ana; Walter, Andrew Leigh

Here, vicinal surfaces may undergo structural transformations as a function of temperature or in the presence of adsorbates. Step-doubling, in which monatomic steps pair up forming double-atom high staircases, is the simplest example. Here we investigate the case of Ni(111) using a curved crystal surface, which allows us to explore the occurrence of step-doubling as a function of temperature and vicinal plane (miscut α and step type). We find a striking A-type ({100}-like microfacets) versus B-type ({111}-like) asymmetry towards step-doubling. The terrace-width distribution analysis performed from Scanning Tunneling Microscopy data points to elastic step interactions overcoming entropic effects at verymore » small miscut α in A-type vicinals, as compared to B-type steps. For A-type vicinals, we elaborate the temperature/miscut phase diagram, on which we establish a critical miscut α c = 9.3° for step-doubling to take place.« less

Proposing an amendment to the Constitution of the United States relative to taxing the people of the United States progressively.

THOMAS, 111th Congress

Rep. Jackson, Jesse L., Jr. [D-IL-2

2009-03-03

House - 03/16/2009 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Inhibitor of the Tyrosine Phosphatase STEP Reverses Cognitive Deficits in a Mouse Model of Alzheimer's Disease

PubMed Central

Xu, Jian; Chatterjee, Manavi; Baguley, Tyler D.; Brouillette, Jonathan; Kurup, Pradeep; Ghosh, Debolina; Kanyo, Jean; Zhang, Yang; Seyb, Kathleen; Ononenyi, Chimezie; Foscue, Ethan; Anderson, George M.; Gresack, Jodi; Cuny, Gregory D.; Glicksman, Marcie A.; Greengard, Paul; Lam, TuKiet T.; Tautz, Lutz; Nairn, Angus C.; Ellman, Jonathan A.; Lombroso, Paul J.

2014-01-01

STEP (STriatal-Enriched protein tyrosine Phosphatase) is a neuron-specific phosphatase that regulates N-methyl-D-aspartate receptor (NMDAR) and α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid receptor (AMPAR) trafficking, as well as ERK1/2, p38, Fyn, and Pyk2 activity. STEP is overactive in several neuropsychiatric and neurodegenerative disorders, including Alzheimer's disease (AD). The increase in STEP activity likely disrupts synaptic function and contributes to the cognitive deficits in AD. AD mice lacking STEP have restored levels of glutamate receptors on synaptosomal membranes and improved cognitive function, results that suggest STEP as a novel therapeutic target for AD. Here we describe the first large-scale effort to identify and characterize small-molecule STEP inhibitors. We identified the benzopentathiepin 8-(trifluoromethyl)-1,2,3,4,5-benzopentathiepin-6-amine hydrochloride (known as TC-2153) as an inhibitor of STEP with an IC50 of 24.6 nM. TC-2153 represents a novel class of PTP inhibitors based upon a cyclic polysulfide pharmacophore that forms a reversible covalent bond with the catalytic cysteine in STEP. In cell-based secondary assays, TC-2153 increased tyrosine phosphorylation of STEP substrates ERK1/2, Pyk2, and GluN2B, and exhibited no toxicity in cortical cultures. Validation and specificity experiments performed in wild-type (WT) and STEP knockout (KO) cortical cells and in vivo in WT and STEP KO mice suggest specificity of inhibitors towards STEP compared to highly homologous tyrosine phosphatases. Furthermore, TC-2153 improved cognitive function in several cognitive tasks in 6- and 12-mo-old triple transgenic AD (3xTg-AD) mice, with no change in beta amyloid and phospho-tau levels. PMID:25093460

Simple models for complex natural surfaces - A strategy for the hyperspectral era of remote sensing

NASA Technical Reports Server (NTRS)

Adams, John B.; Smith, Milton O.; Gillespie, Alan R.

1989-01-01

A two-step strategy for analyzing multispectral images is described. In the first step, the analyst decomposes the signal from each pixel (as expressed by the radiance or reflectance values in each channel) into components that are contributed by spectrally distinct materials on the ground, and those that are due to atmospheric effects, instrumental effects, and other factors, such as illumination. In the second step, the isolated signals from the materials on the ground are selectively edited, and recombined to form various unit maps that are interpretable within the framework of field units. The approach has been tested on multispectral images of a variety of natural land surfaces ranging from hyperarid deserts to tropical rain forests. Data were analyzed from Landsat MSS (multispectral scanner) and TM (Thematic Mapper), the airborne NS001 TM simulator, Viking Lander and Orbiter, AIS, and AVRIS (Airborne Visible and Infrared Imaging Spectrometer).

Classified one-step high-radix signed-digit arithmetic units

NASA Astrophysics Data System (ADS)

Cherri, Abdallah K.

1998-08-01

High-radix number systems enable higher information storage density, less complexity, fewer system components, and fewer cascaded gates and operations. A simple one-step fully parallel high-radix signed-digit arithmetic is proposed for parallel optical computing based on new joint spatial encodings. This reduces hardware requirements and improves throughput by reducing the space-bandwidth produce needed. The high-radix signed-digit arithmetic operations are based on classifying the neighboring input digit pairs into various groups to reduce the computation rules. A new joint spatial encoding technique is developed to present both the operands and the computation rules. This technique increases the spatial bandwidth product of the spatial light modulators of the system. An optical implementation of the proposed high-radix signed-digit arithmetic operations is also presented. It is shown that our one-step trinary signed-digit and quaternary signed-digit arithmetic units are much simpler and better than all previously reported high-radix signed-digit techniques.

Family Complexity, Siblings, and Children's Aggressive Behavior at School Entry

PubMed Central

Fomby, Paula; Goode, Joshua A.; Mollborn, Stefanie

2016-01-01

As family structure in the United States has become increasingly dynamic and complex, children have become more likely to reside with step- or half-siblings through a variety of pathways. When these pathways are accounted for, more than one in six children in the United States lives with a half- or step-sibling at age 4. We use data from the Early Childhood Longitudinal Study-Birth Cohort (N~6,550) to assess the independent and joint influences of residing with a single parent or stepparent and with step or half-siblings on children's aggressive behavior at school entry. The influences of parents’ union status and complex sibship status on aggressive behavior are independent. Family resources partially explain the association between residing with an unpartnered mother and aggressive behavior regardless of sibship status. However, the resource hypothesis does not explain the association of complex sibship with aggressive behavior. PMID:26608795

Developing family rooms in mental health inpatient units: an exploratory descriptive study.

PubMed

Isobel, Sophie; Foster, Kim; Edwards, Clair

2015-06-19

Family-friendly spaces for children and families to visit inpatient mental health units are recommended in international mental health guidelines as one way to provide service delivery that is responsive to the needs of parent-consumers and families. There is a lack of evidence on the implementation of family-friendly spaces or Family Rooms. This study aimed to explore the development, role, and function of Family Rooms in four mental health inpatient units in a local health district in NSW Australia. An exploratory descriptive inductive-deductive design using multiple data sources was employed. Methods included Family Room usage and parental status data over a 12 week period, an open-ended questionnaire, and semi-structured interviews with 20 nurses. Available parental status data indicated that between 8-14 % of inpatients were parents of dependent children under 18. Family Room usage was multipurpose and used specifically for children & families 29 % of the time. As spaces in the units, Family Rooms were perceived as acknowledging of the importance of family, and providing comfortable, secure spaces for parent-consumers and their children and family to maintain connections. Units did not have local policies or guidelines on the development, maintenance, and/or use of the rooms. Despite long-standing recognition of the need to identify consumers' parental status, there remains a lack of systematic processes for identifying parents in mental health inpatient services nationally. Family Rooms as spaces within inpatient units acknowledge the importance of families and are a step towards provision of family-focused mental health care. Recommendations for establishing and maintaining Family Rooms are outlined.

Auxotonic to isometric contraction transitioning in a beating heart causes myosin step-size to down shift

PubMed Central

Sun, Xiaojing; Wang, Yihua; Ajtai, Katalin

2017-01-01

Myosin motors in cardiac ventriculum convert ATP free energy to the work of moving blood volume under pressure. The actin bound motor cyclically rotates its lever-arm/light-chain complex linking motor generated torque to the myosin filament backbone and translating actin against resisting force. Previous research showed that the unloaded in vitro motor is described with high precision by single molecule mechanical characteristics including unitary step-sizes of approximately 3, 5, and 8 nm and their relative step-frequencies of approximately 13, 50, and 37%. The 3 and 8 nm unitary step-sizes are dependent on myosin essential light chain (ELC) N-terminus actin binding. Step-size and step-frequency quantitation specifies in vitro motor function including duty-ratio, power, and strain sensitivity metrics. In vivo, motors integrated into the muscle sarcomere form the more complex and hierarchically functioning muscle machine. The goal of the research reported here is to measure single myosin step-size and step-frequency in vivo to assess how tissue integration impacts motor function. A photoactivatable GFP tags the ventriculum myosin lever-arm/light-chain complex in the beating heart of a live zebrafish embryo. Detected single GFP emission reports time-resolved myosin lever-arm orientation interpreted as step-size and step-frequency providing single myosin mechanical characteristics over the active cycle. Following step-frequency of cardiac ventriculum myosin transitioning from low to high force in relaxed to auxotonic to isometric contraction phases indicates that the imposition of resisting force during contraction causes the motor to down-shift to the 3 nm step-size accounting for >80% of all the steps in the near-isometric phase. At peak force, the ATP initiated actomyosin dissociation is the predominant strain inhibited transition in the native myosin contraction cycle. The proposed model for motor down-shifting and strain sensing involves ELC N-terminus actin binding. Overall, the approach is a unique bottom-up single molecule mechanical characterization of a hierarchically functional native muscle myosin. PMID:28423017

TU-D-201-07: Severity Indication in High Dose Rate Brachytherapy Emergency Response Procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, K; Rustad, F

Purpose: Understanding the corresponding dose to different staff during the High Dose Rate (HDR) Brachytherapy emergency response procedure could help to develop a strategy in efficiency and effective action. In this study, the variation and risk analysis methodology was developed to simulation the HDR emergency response procedure based on severity indicator. Methods: A GammaMedplus iX HDR unit from Varian Medical System was used for this simulation. The emergency response procedure was decomposed based on risk management methods. Severity indexes were used to identify the impact of a risk occurrence on the step including dose to patient and dose to operationmore » staff by varying the time, HDR source activity, distance from the source to patient and staff and the actions. These actions in 7 steps were to press the interrupt button, press emergency shutoff switch, press emergency button on the afterloader keypad, turn emergency hand-crank, remove applicator from the patient, disconnect transfer tube and move afterloader from the patient, and execute emergency surgical recovery. Results: Given the accumulated time in second at the assumed 7 steps were 15, 5, 30, 15, 180, 120, 1800, and the dose rate of HDR source is 10 Ci, the accumulated dose in cGy to patient at 1cm distance were 188, 250, 625, 813, 3063, 4563 and 27063, and the accumulated exposure in rem to operator at outside the vault, 1m and 10cm distance were 0.0, 0.0, 0.1, 0.1, 22.6, 37.6 and 262.6. The variation was determined by the operators in action at different time and distance from the HDR source. Conclusion: The time and dose were estimated for a HDR unit emergency response procedure. It provided information in making optimal decision during the emergency procedure. Further investigation would be to optimize and standardize the responses for other emergency procedure by time-spatial-dose severity function.« less

Association of activities of daily living with the load during step ascent motion in nursing home-residing elderly individuals.

PubMed

Masaki, Mitsuhiro; Ikezoe, Tome; Kamiya, Midori; Araki, Kojiro; Isono, Ryo; Kato, Takehiro; Kusano, Ken; Tanaka, Masayo; Sato, Syunsuke; Hirono, Tetsuya; Kita, Kiyoshi; Tsuboyama, Tadao; Ichihashi, Noriaki

2018-04-19

This study aimed to examine the association of independence in ADL with the loads during step ascent motion and other motor functions in 32 nursing home-residing elderly individuals. Independence in ADL was assessed by using the functional independence measure (FIM). The loads at the upper (i.e., pulling up) and lower (i.e., pushing up) levels during step ascent task was measured on a step ascent platform. Hip extensor, knee extensor, plantar flexor muscle, and quadriceps setting strengths; lower extremity agility using the stepping test; and hip and knee joint pain severities were measured. One-legged stance and functional reach distance for balance, and maximal walking speed, timed up-and-go (TUG) time, five-chair-stand time, and step ascent time were also measured to assess mobility. Stepwise regression analysis revealed that the load at pushing up during step ascent motion and TUG time were significant and independent determinants of FIM score. FIM score decreased with decreased the load at pushing up and increased TUG time. The study results suggest that depending on task specificity, both one step up task's push up peak load during step ascent motion and TUG, can partially explain ADL's FIM score in the nursing home-residing elderly individuals. Lower extremity muscle strength, agility, pain or balance measures did not add to the prediction.

Density distribution function of a self-gravitating isothermal compressible turbulent fluid in the context of molecular clouds ensembles

NASA Astrophysics Data System (ADS)

Donkov, Sava; Stefanov, Ivan Z.

2018-03-01

We have set ourselves the task of obtaining the probability distribution function of the mass density of a self-gravitating isothermal compressible turbulent fluid from its physics. We have done this in the context of a new notion: the molecular clouds ensemble. We have applied a new approach that takes into account the fractal nature of the fluid. Using the medium equations, under the assumption of steady state, we show that the total energy per unit mass is an invariant with respect to the fractal scales. As a next step we obtain a non-linear integral equation for the dimensionless scale Q which is the third root of the integral of the probability distribution function. It is solved approximately up to the leading-order term in the series expansion. We obtain two solutions. They are power-law distributions with different slopes: the first one is -1.5 at low densities, corresponding to an equilibrium between all energies at a given scale, and the second one is -2 at high densities, corresponding to a free fall at small scales.

Functional divisions for visual processing in the central brain of flying Drosophila

PubMed Central

Weir, Peter T.; Dickinson, Michael H.

2015-01-01

Although anatomy is often the first step in assigning functions to neural structures, it is not always clear whether architecturally distinct regions of the brain correspond to operational units. Whereas neuroarchitecture remains relatively static, functional connectivity may change almost instantaneously according to behavioral context. We imaged panneuronal responses to visual stimuli in a highly conserved central brain region in the fruit fly, Drosophila, during flight. In one substructure, the fan-shaped body, automated analysis revealed three layers that were unresponsive in quiescent flies but became responsive to visual stimuli when the animal was flying. The responses of these regions to a broad suite of visual stimuli suggest that they are involved in the regulation of flight heading. To identify the cell types that underlie these responses, we imaged activity in sets of genetically defined neurons with arborizations in the targeted layers. The responses of this collection during flight also segregated into three sets, confirming the existence of three layers, and they collectively accounted for the panneuronal activity. Our results provide an atlas of flight-gated visual responses in a central brain circuit. PMID:26324910

Functional divisions for visual processing in the central brain of flying Drosophila.

PubMed

Weir, Peter T; Dickinson, Michael H

2015-10-06

Although anatomy is often the first step in assigning functions to neural structures, it is not always clear whether architecturally distinct regions of the brain correspond to operational units. Whereas neuroarchitecture remains relatively static, functional connectivity may change almost instantaneously according to behavioral context. We imaged panneuronal responses to visual stimuli in a highly conserved central brain region in the fruit fly, Drosophila, during flight. In one substructure, the fan-shaped body, automated analysis revealed three layers that were unresponsive in quiescent flies but became responsive to visual stimuli when the animal was flying. The responses of these regions to a broad suite of visual stimuli suggest that they are involved in the regulation of flight heading. To identify the cell types that underlie these responses, we imaged activity in sets of genetically defined neurons with arborizations in the targeted layers. The responses of this collection during flight also segregated into three sets, confirming the existence of three layers, and they collectively accounted for the panneuronal activity. Our results provide an atlas of flight-gated visual responses in a central brain circuit.

Atomic force microscopy study on crystal growth of Cu 2+-doped L-arginine phosphate monohydrate crystals

NASA Astrophysics Data System (ADS)

Geng, Y. L.; Xu, D.; Wang, Y. L.; Du, W.; Liu, H. Y.; Zhang, G. H.; Wang, X. Q.; Sun, D. L.

2005-01-01

Sub-steps and defects of the {1 0 0} planes of Cu 2+-doped L-arginine phosphate monohydrate (LAP) crystals are observed by atomic force microscopy. Formation of sub-steps is not due to the stacking faults but a result of single LAP: Cu 2+ molecule acting as growth unit. Two-dimensional (2D) nuclei with the same height as sub-steps occur on the step-edges. Impurities of Cu 2+ ions cause steps bunch and macrosteps formation. Liquid inclusions in the form of long channels form when the macrosteps lose their stability. Numerous small 3D growth hillocks are found in the channels. The extra stress induced by the 3D islands can result in dislocations and steps mismatches.

3 CFR 13582 - Executive Order 13582 of August 17, 2011. Blocking Property of the Government of Syria and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... authority vested in me as President by the Constitution and the laws of the United States of America..., President of the United States of America, in order to take additional steps with respect to the Government..., hereby order: Section 1. (a) All property and interests in property that are in the United States, that...

Team functioning in hospice interprofessional meetings: An exploratory study of providers' perspectives.

PubMed

Washington, Karla T; Guo, Yuqi; Albright, David L; Lewis, Alexandria; Parker Oliver, Debra; Demiris, George

2017-07-01

Interprofessional collaboration is the foundation of hospice service delivery. In the United States, hospice agencies are required to regularly convene interprofessional meetings during which teams review plans of care for the patients and families they serve. A small body of research suggests that team functioning could be significantly enhanced in hospice interprofessional meetings; however, systematic investigation of this possibility has been limited to date. The purpose of this qualitative study was to better understand the experiences and perspectives of hospice providers who regularly participate in interprofessional meetings as a first step toward improving teamwork in this setting. We interviewed 24 hospice providers and conducted a template analysis of qualitative data to identify barriers and facilitators to effective team functioning in interprofessional meetings. Participants recognised the ways meetings supported high-quality, holistic patient and family care but voiced frustrations over meeting inefficiencies, particularly in light of caseloads they perceived as overly demanding. Time constraints were often viewed as prohibiting the inclusion of interprofessional content and full participation of all team members. Findings suggest that modifications to interprofessional meetings such as standardising processes may enhance meeting efficiency and team functioning.

Sour pressure swing adsorption process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhadra, Shubhra Jyoti; Wright, Andrew David; Hufton, Jeffrey Raymond

Methods and apparatuses for separating CO.sub.2 and sulfur-containing compounds from a synthesis gas obtained from gasification of a carbonaceous feedstock. The primary separating steps are performed using a sour pressure swing adsorption (SPSA) system, followed by an acid gas enrichment system and a sulfur removal unit. The SPSA system includes multiple pressure equalization steps and a rinse step using a rinse gas that is supplied from a source other than directly from one of the adsorber beds of the SPSA system.

A neuro-mechanical model of a single leg joint highlighting the basic physiological role of fast and slow muscle fibres of an insect muscle system.

PubMed

Toth, Tibor Istvan; Schmidt, Joachim; Büschges, Ansgar; Daun-Gruhn, Silvia

2013-01-01

In legged animals, the muscle system has a dual function: to produce forces and torques necessary to move the limbs in a systematic way, and to maintain the body in a static position. These two functions are performed by the contribution of specialized motor units, i.e. motoneurons driving sets of specialized muscle fibres. With reference to their overall contraction and metabolic properties they are called fast and slow muscle fibres and can be found ubiquitously in skeletal muscles. Both fibre types are active during stepping, but only the slow ones maintain the posture of the body. From these findings, the general hypothesis on a functional segregation between both fibre types and their neuronal control has arisen. Earlier muscle models did not fully take this aspect into account. They either focused on certain aspects of muscular function or were developed to describe specific behaviours only. By contrast, our neuro-mechanical model is more general as it allows functionally to differentiate between static and dynamic aspects of movement control. It does so by including both muscle fibre types and separate motoneuron drives. Our model helps to gain a deeper insight into how the nervous system might combine neuronal control of locomotion and posture. It predicts that (1) positioning the leg at a specific retraction angle in steady state is most likely due to the extent of recruitment of slow muscle fibres and not to the force developed in the individual fibres of the antagonistic muscles; (2) the fast muscle fibres of antagonistic muscles contract alternately during stepping, while co-contraction of the slow muscle fibres takes place during steady state; (3) there are several possible ways of transition between movement and steady state of the leg achieved by varying the time course of recruitment of the fibres in the participating muscles.

Using State Student Unit Record Data to Increase Community College Student Success

ERIC Educational Resources Information Center

Ewell, Peter; Jenkins, Davis

2008-01-01

This chapter examines lessons learned by states that are using student unit record (SUR) data to improve outcomes for community college students and recommends steps states can take to strengthen their use of SUR databases to benefit students and communities. (Contains 1 exhibit.)

A bill to prohibit the use of drones to kill citizens of the United States within the United States.

THOMAS, 113th Congress

Sen. Cruz, Ted [R-TX

2013-03-07

Senate - 03/11/2013 Read the second time. Placed on Senate Legislative Calendar under General Orders. Calendar No. 22. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A joint resolution relating to the approval of the proposed agreement for nuclear cooperation between the United States and the United Arab Emirates.

THOMAS, 111th Congress

Sen. Kerry, John F. [D-MA

2009-07-13

Senate - 10/15/2009 Placed on Senate Legislative Calendar under General Orders. Calendar No. 180. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Analysis of 3D poroelastodynamics using BEM based on modified time-step scheme

NASA Astrophysics Data System (ADS)

Igumnov, L. A.; Petrov, A. N.; Vorobtsov, I. V.

2017-10-01

The development of 3d boundary elements modeling of dynamic partially saturated poroelastic media using a stepping scheme is presented in this paper. Boundary Element Method (BEM) in Laplace domain and the time-stepping scheme for numerical inversion of the Laplace transform are used to solve the boundary value problem. The modified stepping scheme with a varied integration step for quadrature coefficients calculation using the symmetry of the integrand function and integral formulas of Strongly Oscillating Functions was applied. The problem with force acting on a poroelastic prismatic console end was solved using the developed method. A comparison of the results obtained by the traditional stepping scheme with the solutions obtained by this modified scheme shows that the computational efficiency is better with usage of combined formulas.

Using step and path selection functions for estimating resistance to movement: Pumas as a case study

Treesearch

Katherine A. Zeller; Kevin McGarigal; Samuel A. Cushman; Paul Beier; T. Winston Vickers; Walter M. Boyce

2015-01-01

GPS telemetry collars and their ability to acquire accurate and consistently frequent locations have increased the use of step selection functions (SSFs) and path selection functions (PathSFs) for studying animal movement and estimating resistance. However, previously published SSFs and PathSFs often do not accommodate multiple scales or multiscale modeling....

Teaching about the United Nations in the United States, January 1, 1960, through December 31, 1963. Report of the United States of America to the United Nations Economic and Social Council in Compliance with ECOSOC Resolution 748 (XXIX). Bulletin, 1964, No. 25. OE-14038-63

ERIC Educational Resources Information Center

Office of Education, US Department of Health, Education, and Welfare, 1964

1964-01-01

At 4-year intervals since 1950, the United Nations has requested its Member States to review and report what schools, colleges, and adult organizations have been doing to make known the work of international organizations. The present U.S. report for 1960-1963 is a chronicle of the many steps toward peace taken by individuals, organizations,…

[The investigative and adversarial process in Italy and the United States].

PubMed

Palermo, George B; Mastronardi, Vincenzo; Agostini, Susanna

2012-01-01

The structure of the US legal system, which relies on the presence of different courts to provide for the impartial administration of justice, both civil and criminal is discussed. Therefore, all the steps to conviction or acquittal of the American criminal trial, are taken into consideration. However, there is the presumption of innocence of the accused and the prosecution must prove his guilt beyond any reasonable doubt. Another important procedure in the US trial is the jury selection (voir dire), 12 jurors: 6 for the defense and 6 for the prosecution. In Italy it was observed that the autonomy of the police would squeeze the steering function of the prosecutor, and the practice of "under cover" investigation has granted an extension of police activity.

Dislocation-Twin Boundary Interactions Induced Nanocrystalline via SPD Processing in Bulk Metals

NASA Astrophysics Data System (ADS)

Zhang, Fucheng; Feng, Xiaoyong; Yang, Zhinan; Kang, Jie; Wang, Tiansheng

2015-03-01

This report investigated dislocation-twin boundary (TB) interactions that cause the TB to disappear and turn into a high-angle grain boundary (GB). The evolution of the microstructural characteristics of Hadfield steel was shown as a function of severe plastic deformation processing time. Sessile Frank partial dislocations and/or sessile unit dislocations were formed on the TB through possible dislocation reactions. These reactions induced atomic steps on the TB and led to the accumulation of gliding dislocations at the TB, which resulted in the transition from coherent TB to incoherent GB. The factors that affect these interactions were described, and a physical model was established to explain in detail the feasible dislocation reactions at the TB.

Dislocation–Twin Boundary Interactions Induced Nanocrystalline via SPD Processing in Bulk Metals

PubMed Central

Zhang, Fucheng; Feng, Xiaoyong; Yang, Zhinan; Kang, Jie; Wang, Tiansheng

2015-01-01

This report investigated dislocation–twin boundary (TB) interactions that cause the TB to disappear and turn into a high-angle grain boundary (GB). The evolution of the microstructural characteristics of Hadfield steel was shown as a function of severe plastic deformation processing time. Sessile Frank partial dislocations and/or sessile unit dislocations were formed on the TB through possible dislocation reactions. These reactions induced atomic steps on the TB and led to the accumulation of gliding dislocations at the TB, which resulted in the transition from coherent TB to incoherent GB. The factors that affect these interactions were described, and a physical model was established to explain in detail the feasible dislocation reactions at the TB. PMID:25757550

Dislocation-twin boundary interactions induced nanocrystalline via SPD processing in bulk metals.

PubMed

Zhang, Fucheng; Feng, Xiaoyong; Yang, Zhinan; Kang, Jie; Wang, Tiansheng

2015-03-11

This report investigated dislocation-twin boundary (TB) interactions that cause the TB to disappear and turn into a high-angle grain boundary (GB). The evolution of the microstructural characteristics of Hadfield steel was shown as a function of severe plastic deformation processing time. Sessile Frank partial dislocations and/or sessile unit dislocations were formed on the TB through possible dislocation reactions. These reactions induced atomic steps on the TB and led to the accumulation of gliding dislocations at the TB, which resulted in the transition from coherent TB to incoherent GB. The factors that affect these interactions were described, and a physical model was established to explain in detail the feasible dislocation reactions at the TB.

Feasibility of Focused Stepping Practice During Inpatient Rehabilitation Poststroke and Potential Contributions to Mobility Outcomes.

PubMed

Hornby, T George; Holleran, Carey L; Leddy, Abigail L; Hennessy, Patrick; Leech, Kristan A; Connolly, Mark; Moore, Jennifer L; Straube, Donald; Lovell, Linda; Roth, Elliot

2015-01-01

Optimal physical therapy strategies to maximize locomotor function in patients early poststroke are not well established. Emerging data indicate that substantial amounts of task-specific stepping practice may improve locomotor function, although stepping practice provided during inpatient rehabilitation is limited (<300 steps/session). The purpose of this investigation was to determine the feasibility of providing focused stepping training to patients early poststroke and its potential association with walking and other mobility outcomes. Daily stepping was recorded on 201 patients <6 months poststroke (80% < 1 month) during inpatient rehabilitation following implementation of a focused training program to maximize stepping practice during clinical physical therapy sessions. Primary outcomes included distance and physical assistance required during a 6-minute walk test (6MWT) and balance using the Berg Balance Scale (BBS). Retrospective data analysis included multiple regression techniques to evaluate the contributions of demographics, training activities, and baseline motor function to primary outcomes at discharge. Median stepping activity recorded from patients was 1516 steps/d, which is 5 to 6 times greater than that typically observed. The number of steps per day was positively correlated with both discharge 6MWT and BBS and improvements from baseline (changes; r = 0.40-0.87), independently contributing 10% to 31% of the total variance. Stepping activity also predicted level of assistance at discharge and discharge location (home vs other facility). Providing focused, repeated stepping training was feasible early poststroke during inpatient rehabilitation and was related to mobility outcomes. Further research is required to evaluate the effectiveness of these training strategies on short- or long-term mobility outcomes as compared with conventional interventions. © The Author(s) 2015.

Effects of Stand and Step Training with Epidural Stimulation on Motor Function for Standing in Chronic Complete Paraplegics

PubMed Central

Rejc, Enrico; Angeli, Claudia A.; Bryant, Nicole

2017-01-01

Abstract Individuals affected by motor complete spinal cord injury are unable to stand, walk, or move their lower limbs voluntarily; this diagnosis normally implies severe limitations for functional recovery. We have recently shown that the appropriate selection of epidural stimulation parameters was critical to promoting full-body, weight-bearing standing with independent knee extension in four individuals with chronic clinically complete paralysis. In the current study, we examined the effects of stand training and subsequent step training with epidural stimulation on motor function for standing in the same four individuals. After stand training, the ability to stand improved to different extents in the four participants. Step training performed afterwards substantially impaired standing ability in three of the four individuals. Improved standing ability generally coincided with continuous electromyography (EMG) patterns with constant levels of ground reaction forces. Conversely, poorer standing ability was associated with more variable EMG patterns that alternated EMG bursts and longer periods of negligible activity in most of the muscles. Stand and step training also differentially affected the evoked potentials amplitude modulation induced by sitting-to-standing transition. Finally, stand and step training with epidural stimulation were not sufficient to improve motor function for standing without stimulation. These findings show that the spinal circuitry of motor complete paraplegics can generate motor patterns effective for standing in response to task-specific training with optimized stimulation parameters. Conversely, step training can lead to neural adaptations resulting in impaired motor function for standing. PMID:27566051

Are United States Medical Licensing Exam Step 1 and 2 scores valid measures for postgraduate medical residency selection decisions?

PubMed

McGaghie, William C; Cohen, Elaine R; Wayne, Diane B

2011-01-01

United States Medical Licensing Examination (USMLE) scores are frequently used by residency program directors when evaluating applicants. The objectives of this report are to study the chain of reasoning and evidence that underlies the use of USMLE Step 1 and 2 scores for postgraduate medical resident selection decisions and to evaluate the validity argument about the utility of USMLE scores for this purpose. This is a research synthesis using the critical review approach. The study first describes the chain of reasoning that underlies a validity argument about using test scores for a specific purpose. It continues by summarizing correlations of USMLE Step 1 and 2 scores and reliable measures of clinical skill acquisition drawn from nine studies involving 393 medical learners from 2005 to 2010. The integrity of the validity argument about using USMLE Step 1 and 2 scores for postgraduate residency selection decisions is tested. The research synthesis shows that USMLE Step 1 and 2 scores are not correlated with reliable measures of medical students', residents', and fellows' clinical skill acquisition. The validity argument about using USMLE Step 1 and 2 scores for postgraduate residency selection decisions is neither structured, coherent, nor evidence based. The USMLE score validity argument breaks down on grounds of extrapolation and decision/interpretation because the scores are not associated with measures of clinical skill acquisition among advanced medical students, residents, and subspecialty fellows. Continued use of USMLE Step 1 and 2 scores for postgraduate medical residency selection decisions is discouraged.

Synthesis of antiviral tetrahydrocarbazole derivatives by photochemical and acid-catalyzed C-H functionalization via intermediate peroxides (CHIPS).

PubMed

Gulzar, Naeem; Klussmann, Martin

2014-06-20

The direct functionalization of C-H bonds is an important and long standing goal in organic chemistry. Such transformations can be very powerful in order to streamline synthesis by saving steps, time and material compared to conventional methods that require the introduction and removal of activating or directing groups. Therefore, the functionalization of C-H bonds is also attractive for green chemistry. Under oxidative conditions, two C-H bonds or one C-H and one heteroatom-H bond can be transformed to C-C and C-heteroatom bonds, respectively. Often these oxidative coupling reactions require synthetic oxidants, expensive catalysts or high temperatures. Here, we describe a two-step procedure to functionalize indole derivatives, more specifically tetrahydrocarbazoles, by C-H amination using only elemental oxygen as oxidant. The reaction uses the principle of C-H functionalization via Intermediate PeroxideS (CHIPS). In the first step, a hydroperoxide is generated oxidatively using visible light, a photosensitizer and elemental oxygen. In the second step, the N-nucleophile, an aniline, is introduced by Brønsted-acid catalyzed activation of the hydroperoxide leaving group. The products of the first and second step often precipitate and can be conveniently filtered off. The synthesis of a biologically active compound is shown.

Wet Worlds: Explore the World of Water. Marine and Fresh Water Activities for the Elementary Classroom.

ERIC Educational Resources Information Center

Solomon, Gerard; And Others

Complete with student worksheets, field trip ideas, illustrations, vocabulary lists, suggested materials, and step-by-step procedures, the document presents a compilation of ideas for teaching elementary school (K-6) students about marine and fresh water. In the first unit students build miniature monuments and observe the deterioration of…

Preventing Dust Collection: Transforming Student Affairs Strategic Planning into Tangible Results

ERIC Educational Resources Information Center

Taylor, Simone Himbeault; Matney, Malinda M.

2007-01-01

The Division of Student Affairs at the University of Michigan in Ann Arbor engaged in an iterative strategic process to create and implement a set of long-range goals. This strategic journey continues to evolve, uniting a guiding framework of strategic planning steps, a reflective process with an assessment component within each step, and a group…

Dynamic Emotional Processing in Experiential Therapy: Two Steps Forward, One Step Back

ERIC Educational Resources Information Center

Pascual-Leone, Antonio

2009-01-01

The study of dynamic and nonlinear change has been a valuable development in psychotherapy process research. However, little advancement has been made in describing how moment-by-moment affective processes contribute to larger units of change. The purpose of this study was to examine observable moment-by-moment sequences in emotional processing as…

The Copyright Handbook: How To Protect and Use Written Works. Third Edition.

ERIC Educational Resources Information Center

Fishman, Stephen

Based on the premise that anyone who works with words needs to understand copyright law, this handbook provides forms and step-by-step instructions for protecting all types of written expression under United States and international copyright law. The handbook discusses: (1) how to register a written work with the copyright office; (2) what types…

Gender Differences in Examinee Performance on the Step 2 Clinical Skills[R] Data Gathering (DG) and Patient Note (PN) Components

ERIC Educational Resources Information Center

Swygert, Kimberly A.; Cuddy, Monica M.; van Zanten, Marta; Haist, Steven A.; Jobe, Ann C.

2012-01-01

Multiple studies examining the relationship between physician gender and performance on examinations have found consistent significant gender differences, but relatively little information is available related to any gender effect on interviewing and written communication skills. The United States Medical Licensing Examination (USMLE[R]) Step 2…

Step-based translation of physical activity guidelines in the Lower Mississippi Delta

USDA-ARS?s Scientific Manuscript database

To determine how many steps/day equate to current moderate-to-vigorous physical activity (MVPA) guidelines in a population from the Lower Mississippi Delta (LMD) of the United States, 58 overweight adults wore an Actigraph accelerometer (GT3X) for up to two weeks. Minutes/day in MVPA was a good pred...

Evolutionary Steps: A Stairway-Created Display of the History of Life.

ERIC Educational Resources Information Center

Hedeen, Stanley E.

1997-01-01

Describes an exercise whereby a biology class used a stairway to illustrate how fossiliferous rock strata were deposited, the oldest on the bottom and most recent at the top. Each step represents a dated boundary between adjacent geological ages, and each riser is labeled as a geological unit. Geological time is compressed to 365 days. Offers…

36 CFR 1280.2 - What property is under the control of the Archivist of the United States?

Code of Federal Regulations, 2011 CFR

2011-07-01

... the building; (2) On the 7th Street, 9th Street, and Constitution Avenue, NW, sides of the building... sidewalks and other grounds, the steps leading up to the Constitution Avenue entrance, the Constitution Avenue entrance, and the portico area between the steps and the Constitution Avenue entrance. (3) The...

Using a Five-Step Procedure for Inferential Statistical Analyses

ERIC Educational Resources Information Center

Kamin, Lawrence F.

2010-01-01

Many statistics texts pose inferential statistical problems in a disjointed way. By using a simple five-step procedure as a template for statistical inference problems, the student can solve problems in an organized fashion. The problem and its solution will thus be a stand-by-itself organic whole and a single unit of thought and effort. The…

Adaptive management on public lands in the United States: commitment or rhetoric?

Treesearch

William H. Moir; William M. Block

2001-01-01

Adaptive management (AM is the process of implementing land management activities in incremental steps and evaluating whether desired outcomes are being achieved at each step. If conditions deviate substantially from predictions, management activities are adjusted to achieve the desired outcomes. Thus, AM is a kind of monitoring, an activity that land management...

Proposing an amendment to the Constitution of the United States regarding the right of citizens of the United States to health care of equal high quality.

THOMAS, 111th Congress

Rep. Jackson, Jesse L., Jr. [D-IL-2

2009-03-03

House - 03/16/2009 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

40 CFR 63.12005 - What definitions apply to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... venting episode that is associated with a single unit operation. A unit operation may have more than one... characterized by a two-step anhydrous polymerization process: the formation of small resin particles in a pre... of the resin particles in a post-polymerization reactor using additional vinyl chloride monomer...

A bill to designate the United States courthouse under construction at 510 19th Street, Bakersfield, California, as the Myron Donovan Crocker United States Courthouse.

THOMAS, 112th Congress

Sen. Boxer, Barbara [D-CA

2011-07-22

House - 07/28/2011 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status Passed SenateHere are the steps for Status of Legislation:

Around Marshall

NASA Image and Video Library

1987-03-01

The Peenemunde Rocket Team reunited on the steps of Marshall Space Flight Center's (MSFC) Headquarter Building 4200 for a reunion. The Peenemunde Rocket team were first assembled in Germany prior to World War II. They came to the United States at the end of the War and became the nucleus of the United States Army's rocket program.

To designate the United States courthouse located at 300 West Second Street in Little Rock, Arkansas, as the "Morris Sheppard Arnold United States Courthouse".

THOMAS, 113th Congress

Rep. Griffin, Tim [R-AR-2

2013-01-23

House - 01/24/2013 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

To designate the United States courthouse under construction at 510 19th Street, Bakersfield, California, as the Myron Donovan Crocker United States Courthouse.

THOMAS, 112th Congress

Rep. Costa, Jim [D-CA-20

2011-07-26

House - 07/27/2011 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

To designate the United States courthouse located at 100 North Church Street in Las Cruces, New Mexico, as the "Edwin L. Mechem United States Courthouse".

THOMAS, 113th Congress

Rep. Pearce, Stevan [R-NM-2

2013-03-14

House - 03/15/2013 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Astronaut Bruce McCandless during an underwater test MMU/FSS in bldg 29 WETF

NASA Image and Video Library

1981-08-04

Astronaut Bruce McCandless during an underwater test of the Manned Maneuvering Unit (MMU) Flight Support Station (FSS) donning and doffing in the Bldg 29 Weightless Environment Training Facility (WETF). View is of McCandless wearing the extravehicular mobility unit (EMU), stepping into the MMU.

To amend title 23, United States Code, with respect to United States Route 78 in Mississippi, and for other purposes.

THOMAS, 113th Congress

Rep. Nunnelee, Alan [R-MS-1

2014-03-14

Senate - 05/20/2014 Received in the Senate and Read twice and referred to the Committee on Environment and Public Works. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

To designate the United States Courthouse to be constructed in Jackson, Mississippi, as the "R. Jess Brown United States Courthouse".

THOMAS, 111th Congress

Rep. Thompson, Bennie G. [D-MS-2

2009-02-03

Senate - 03/11/2009 Received in the Senate and Read twice and referred to the Committee on Environment and Public Works. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Proposing an amendment to the Constitution of the United States giving Congress power to prohibit the physical desecration of the flag of the United States.

THOMAS, 111th Congress

Rep. Emerson, Jo Ann [R-MO-8

2009-04-30

House - 06/12/2009 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Proposing an amendment to the Constitution of the United States regarding presidential election voting rights for residents of all United States territories and commonwealths.

THOMAS, 111th Congress

Rep. Christensen, Donna M. [D-VI-At Large

2009-01-06

House - 02/09/2009 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Proposing an amendment to the Constitution of the United States to give citizens of the United States the right to recall elected officials.

THOMAS, 111th Congress

Rep. Hoekstra, Peter [R-MI-2

2010-01-21

House - 03/01/2010 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

To amend title 40, United States Code, to permit commercial filmmaking and photography on the United States Capitol grounds, and for other purposes.

THOMAS, 113th Congress

Rep. Norton, Eleanor Holmes [D-DC-At Large

2014-03-13

House - 03/14/2014 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Reserve valuation in electric power systems

NASA Astrophysics Data System (ADS)

Ruiz, Pablo Ariel

Operational reliability is provided in part by scheduling capacity in excess of the load forecast. This reserve capacity balances the uncertain power demand with the supply in real time and provides for equipment outages. Traditionally, reserve scheduling has been ensured by enforcing reserve requirements in the operations planning. An alternate approach is to employ a stochastic formulation, which allows the explicit modeling of the sources of uncertainty. This thesis compares stochastic and reserve methods and evaluates the benefits of a combined approach for the efficient management of uncertainty in the unit commitment problem. Numerical studies show that the unit commitment solutions obtained for the combined approach are robust and superior with respect to the traditional approach. These robust solutions are especially valuable in areas with a high proportion of wind power, as their built-in flexibility allows the dispatch of practically all the available wind power while minimizing the costs of operation. The scheduled reserve has an economic value since it reduces the outage costs. In several electricity markets, reserve demand functions have been implemented to take into account the value of reserve in the market clearing process. These often take the form of a step-down function at the reserve requirement level, and as such they may not appropriately represent the reserve value. The value of reserve is impacted by the reliability, dynamic and stochastic characteristics of system components, the system operation policies, and the economic aspects such as the risk preferences of the demand. In this thesis, these aspects are taken into account to approximate the reserve value and construct reserve demand functions. Illustrative examples show that the demand functions constructed have similarities with those implemented in some markets.

Spectrum online-tunable Mach-Zehnder interferometer based on step-like tapers and its refractive index sensing characteristics

NASA Astrophysics Data System (ADS)

Zhao, Yong; Chen, Mao-qing; Xia, Feng; Hu, Hai-feng

2017-11-01

A novel refractive index (RI) sensor based on an asymmetrical Mach-Zehnder interferometer (MZI) with two different step-like tapers is proposed. The step-like taper is fabricated by fusion splicing two half tapers with an appropriate offset. By further applying offset and discharging to the last fabricated step-like taper of MZI, influence of taper parameters on interference spectrum is investigated using only one device. This simple technique provides an on-line method to sweep parameters of step-like tapers and speeds up the optimization process of interference spectrum, meanwhile. In RI sensing experiment, the sensor has a high sensitivity of -185.79 nm/RIU (refractive index unit) in the RI range of 1.3333-1.3673.

3D Model of the Neal Hot Springs Geothermal Area

DOE Data Explorer

Faulds, James E.

2013-12-31

The Neal Hot Springs geothermal system lies in a left-step in a north-striking, west-dipping normal fault system, consisting of the Neal Fault to the south and the Sugarloaf Butte Fault to the north (Edwards, 2013). The Neal Hot Springs 3D geologic model consists of 104 faults and 13 stratigraphic units. The stratigraphy is sub-horizontal to dipping <10 degrees and there is no predominant dip-direction. Geothermal production is exclusively from the Neal Fault south of, and within the step-over, while geothermal injection is into both the Neal Fault to the south of the step-over and faults within the step-over.

Steps wandering on the lysozyme and KDP crystals during growth in solution

NASA Astrophysics Data System (ADS)

Rashkovich, L. N.; Chernevich, T. G.; Gvozdev, N. V.; Shustin, O. A.; Yaminsky, I. V.

2001-10-01

We have applied atomic force microscopy for the study in solution of time evolution of step roughness on the crystal faces with high (pottasium dihydrophosphate: KDP) and low (lysozyme) density of kinks. It was found that the roughness increases with time revealing the time dependence as t1/4. Step velocity does not depend upon distance between steps, that is why the experimental data were interpreted on the basis of Voronkov theory, which assume, that the attachment and detachment of building units in the kinks is major limitation for crystal growth. In the frame of this theoretical model the calculation of material parameters is performed.

Using a Taxonomy of Differential Step Functioning to Improve the Interpretation of DIF in Polytomous Items: An Illustration

ERIC Educational Resources Information Center

Penfield, Randall D.; Alvarez, Karina; Lee, Okhee

2009-01-01

The assessment of differential item functioning (DIF) in polytomous items addresses between-group differences in measurement properties at the item level, but typically does not inform which score levels may be involved in the DIF effect. The framework of differential step functioning (DSF) addresses this issue by examining between-group…

To express the policy of the United States regarding the United States relationship with Native Hawaiians, to provide a process for the reorganization of a Native Hawaiian government and the recognition by the United States of the Native Hawaiian government, and for other purposes.

THOMAS, 111th Congress

Rep. Abercrombie, Neil [D-HI-1

2009-02-04

House - 07/23/2009 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Living environment and mobility of older adults.

PubMed

Cress, M Elaine; Orini, Stefania; Kinsler, Laura

2011-01-01

Older adults often elect to move into smaller living environments. Smaller living space and the addition of services provided by a retirement community (RC) may make living easier for the individual, but it may also reduce the amount of daily physical activity and ultimately reduce functional ability. With home size as an independent variable, the primary purpose of this study was to evaluate daily physical activity and physical function of community dwellers (CD; n = 31) as compared to residents of an RC (n = 30). In this cross-sectional study design, assessments included: the Continuous Scale Physical Functional Performance - 10 test, with a possible range of 0-100, higher scores reflecting better function; Step Activity Monitor (StepWatch 3.1); a physical activity questionnaire, the area of the home (in square meters). Groups were compared by one-way ANOVA. A general linear regression model was used to predict the number of steps per day at home. The level of significance was p < 0.05. Of the 61 volunteers (mean age: 79 ± 6.3 years; range: 65-94 years), the RC living space (68 ± 37.7 m(2)) was 62% smaller than the CD living space (182.8 ± 77.9 m(2); p = 0.001). After correcting for age, the RC took fewer total steps per day excluding exercise (p = 0.03) and had lower function (p = 0.005) than the CD. On average, RC residents take 3,000 steps less per day and have approximately 60% of the living space of a CD. Home size and physical function were primary predictors of the number of steps taken at home, as found using a general linear regression analysis. Copyright © 2010 S. Karger AG, Basel.

Conflict and coordination in the provision of public goods: a conceptual analysis of continuous and step-level games.

PubMed

Abele, Susanne; Stasser, Garold; Chartier, Christopher

2010-11-01

Conflicts between individual and collective interests are ubiquitous in social life. Experimental studies have investigated the resolution of such conflicts using public goods games with either continuous or step-level payoff functions. Game theory and social interdependence theory identify consequential differences between these two types of games. Continuous function games are prime examples of social dilemmas because they always contain a conflict between individual and collective interests, whereas step-level games can be construed as social coordination games. Step-level games often provide opportunities for coordinated solutions that benefit both the collective and the individuals. For this and other reasons, the authors conclude that one cannot safely generalize results obtained from step-level to continuous-form games (or vice versa). Finally, the authors identify specific characteristics of the payoff function in public goods games that conceptually mark the transition from a pure dilemma to a coordination problem nested within a dilemma.

S-World: A high resolution global soil database for simulation modelling (Invited)

NASA Astrophysics Data System (ADS)

Stoorvogel, J. J.

2013-12-01

There is an increasing call for high resolution soil information at the global level. A good example for such a call is the Global Gridded Crop Model Intercomparison carried out within AgMIP. While local studies can make use of surveying techniques to collect additional techniques this is practically impossible at the global level. It is therefore important to rely on legacy data like the Harmonized World Soil Database. Several efforts do exist that aim at the development of global gridded soil property databases. These estimates of the variation of soil properties can be used to assess e.g., global soil carbon stocks. However, they do not allow for simulation runs with e.g., crop growth simulation models as these models require a description of the entire pedon rather than a few soil properties. This study provides the required quantitative description of pedons at a 1 km resolution for simulation modelling. It uses the Harmonized World Soil Database (HWSD) for the spatial distribution of soil types, the ISRIC-WISE soil profile database to derive information on soil properties per soil type, and a range of co-variables on topography, climate, and land cover to further disaggregate the available data. The methodology aims to take stock of these available data. The soil database is developed in five main steps. Step 1: All 148 soil types are ordered on the basis of their expected topographic position using e.g., drainage, salinization, and pedogenesis. Using the topographic ordering and combining the HWSD with a digital elevation model allows for the spatial disaggregation of the composite soil units. This results in a new soil map with homogeneous soil units. Step 2: The ranges of major soil properties for the topsoil and subsoil of each of the 148 soil types are derived from the ISRIC-WISE soil profile database. Step 3: A model of soil formation is developed that focuses on the basic conceptual question where we are within the range of a particular soil property at a particular location given a specific soil type. The soil properties are predicted for each grid cell based on the soil type, the corresponding ranges of soil properties, and the co-variables. Step 4: Standard depth profiles are developed for each of the soil types using the diagnostic criteria of the soil types and soil profile information from the ISRIC-WISE database. The standard soil profiles are combined with the the predicted values for the topsoil and subsoil yielding unique soil profiles at each location. Step 5: In a final step, additional soil properties are added to the database using averages for the soil types and pedo-transfer functions. The methodology, denominated S-World (Soils of the World), results in readily available global maps with quantitative pedon data for modelling purposes. It forms the basis for the Global Gridded Crop Model Intercomparison carried out within AgMIP.

Does the NBME Surgery Shelf exam constitute a "double jeopardy" of USMLE Step 1 performance?

PubMed

Ryan, Michael S; Colbert-Getz, Jorie M; Glenn, Salem N; Browning, Joel D; Anand, Rahul J

2017-02-01

Scores from the NBME Subject Examination in Surgery (Surgery Shelf) positively correlate with United States Medical Licensing Examination Step 1 (Step 1). Based on this relationship, the authors evaluated the predictive value of Step 1 on the Surgery Shelf. Surgery Shelf standard scores were substituted for Step 1 standard scores for 395 students in 2012-2014 at one medical school. Linear regression was used to determine how well Step 1 scores predicted Surgery Shelf scores. Percent match between original (with Shelf) and modified (with Step 1) clerkship grades were computed. Step 1 scores significantly predicted Surgery Shelf scores, R 2  = 0.42, P < 0.001. For every point increase in Step 1, a Surgery Shelf score increased by 0.30 points. Seventy-seven percent of original grades matched the modified grades. Replacing Surgery Shelf scores with Step 1 scores did not have an effect on the majority of final clerkship grades. This observation raises concern over use of Surgery Shelf scores as a measure of knowledge obtained during the Surgery clerkship. Copyright © 2016 Elsevier Inc. All rights reserved.

Nucleation and growth of a bacterial functional amyloid at single fiber resolution

PubMed Central

Feuillie, Cécile; Jonckheere, Wim; Valotteau, Claire; Dufrêne, Yves F.; Remaut, Han

2017-01-01

Curli are functional amyloids produced by proteobacteria like Escherichia coli, as part of the extracellular matrix that holds cells together into biofilms. The molecular events during curli nucleation and fiber extension remain largely unknown. Combining observations from curli amyloidogenesis in bulk solutions with real-time in situ nanoscopic imaging at the single fiber level, we show that curli display polar growth, and detect two kinetic regimes of fiber elongation. Single fibers exhibit stop-and-go dynamics characterized by bursts of steady-state growth alternated with periods of stagnation. At high subunit concentrations fibers show constant, unperturbed burst growth. Curli follow a one-step nucleation process, where monomers contemporaneously fold and oligomerize into minimal fiber units that have growth characteristics identical to the mature fibrils. Kinetic data and interaction studies of curli fibrillation in the presence of the natural inhibitor CsgC show the inhibitor binds curli fibers and predominantly acts at the level of fiber elongation. PMID:28628096

STEP activation by Gαq coupled GPCRs opposes Src regulation of NMDA receptors containing the GluN2A subunit

PubMed Central

Tian, Meng; Xu, Jian; Lei, Gang; Lombroso, Paul J.; Jackson, Michael F.; MacDonald, John F.

2016-01-01

N-methyl-D-aspartate receptors (NMDARs) are necessary for the induction of synaptic plasticity and for the consolidation of learning and memory. NMDAR function is tightly regulated by functionally opposed families of kinases and phosphatases. Herein we show that the striatal-enriched protein tyrosine phosphatase (STEP) is recruited by Gαq-coupled receptors, including the M1 muscarinic acetylcholine receptor (M1R), and opposes the Src tyrosine kinase-mediated increase in the function of NMDARs composed of GluN2A. STEP activation by M1R stimulation requires IP3Rs and can depress NMDA-evoked currents with modest intracellular Ca2+ buffering. Src recruitment by M1R stimulation requires coincident NMDAR activation and can augment NMDA-evoked currents with high intracellular Ca2+ buffering. Our findings suggest that Src and STEP recruitment is contingent on differing intracellular Ca2+ dynamics that dictate whether NMDAR function is augmented or depressed following M1R stimulation. PMID:27857196

Oxygen reduction on a Pt(111) catalyst in HT-PEM fuel cells by density functional theory

NASA Astrophysics Data System (ADS)

Sun, Hong; Li, Jie; Almheiri, Saif; Xiao, Jianyu

2017-08-01

The oxygen reduction reaction plays an important role in the performance of high-temperature proton exchange membrane (HT-PEM) fuel cells. In this study, a molecular dynamics model, which is based on the density functional theory and couples the system's energy, the exchange-correlation energy functional, the charge density distribution function, and the simplified Kohn-Sham equation, was developed to simulate the oxygen reduction reaction on a Pt(111) surface. Additionally, an electrochemical reaction system on the basis of a four-electron reaction mechanism was also developed for this simulation. The reaction path of the oxygen reduction reaction, the product structure of each reaction step and the system's energy were simulated. It is found that the first step reaction of the first hydrogen ion with the oxygen molecule is the controlling step of the overall reaction. Increasing the operating temperature speeds up the first step reaction rate and slightly decreases its reaction energy barrier. Our results provide insight into the working principles of HT-PEM fuel cells.

Computing single step operators of logic programming in radial basis function neural networks

NASA Astrophysics Data System (ADS)

Hamadneh, Nawaf; Sathasivam, Saratha; Choon, Ong Hong

2014-07-01

Logic programming is the process that leads from an original formulation of a computing problem to executable programs. A normal logic program consists of a finite set of clauses. A valuation I of logic programming is a mapping from ground atoms to false or true. The single step operator of any logic programming is defined as a function (Tp:I→I). Logic programming is well-suited to building the artificial intelligence systems. In this study, we established a new technique to compute the single step operators of logic programming in the radial basis function neural networks. To do that, we proposed a new technique to generate the training data sets of single step operators. The training data sets are used to build the neural networks. We used the recurrent radial basis function neural networks to get to the steady state (the fixed point of the operators). To improve the performance of the neural networks, we used the particle swarm optimization algorithm to train the networks.

GPS Metric Tracking Unit

NASA Technical Reports Server (NTRS)

2008-01-01

As Global Positioning Satellite (GPS) applications become more prevalent for land- and air-based vehicles, GPS applications for space vehicles will also increase. The Applied Technology Directorate of Kennedy Space Center (KSC) has developed a lightweight, low-cost GPS Metric Tracking Unit (GMTU), the first of two steps in developing a lightweight, low-cost Space-Based Tracking and Command Subsystem (STACS) designed to meet Range Safety's link margin and latency requirements for vehicle command and telemetry data. The goals of STACS are to improve Range Safety operations and expand tracking capabilities for space vehicles. STACS will track the vehicle, receive commands, and send telemetry data through the space-based asset, which will dramatically reduce dependence on ground-based assets. The other step was the Low-Cost Tracking and Data Relay Satellite System (TDRSS) Transceiver (LCT2), developed by the Wallops Flight Facility (WFF), which allows the vehicle to communicate with a geosynchronous relay satellite. Although the GMTU and LCT2 were independently implemented and tested, the design collaboration of KSC and WFF engineers allowed GMTU and LCT2 to be integrated into one enclosure, leading to the final STACS. In operation, GMTU needs only a radio frequency (RF) input from a GPS antenna and outputs position and velocity data to the vehicle through a serial or pulse code modulation (PCM) interface. GMTU includes one commercial GPS receiver board and a custom board, the Command and Telemetry Processor (CTP) developed by KSC. The CTP design is based on a field-programmable gate array (FPGA) with embedded processors to support GPS functions.

Mode selectivity in the intramolecular cyclization of ketenimines bearing N-acylimino units: a computational and experimental study.

PubMed

Alajarín, Mateo; Sánchez-Andrada, Pilar; Vidal, Angel; Tovar, Fulgencio

2005-02-18

[reaction: see text] The mode selectivity in the intramolecular cyclization of a particular class of ketenimines bearing N-acylimino units has been studied by ab initio and DFT calculations. In the model compounds the carbonyl carbon atom and the keteniminic nitrogen atom are linked either by a vinylic or an o-phenylene tether. Two cyclization modes have been analyzed: the [2+2] cycloaddition furnishing compounds with an azeto[2,1-b]pyrimidinone moiety and a 6pi-electrocyclic ring closure leading to compounds enclosing a 1,3-oxazine ring. The [2+2] cycloaddition reaction takes place via a two-step process with formation of a zwitterionic intermediate, which has been characterized as a cross-conjugated mesomeric betaine. The 6pi-electrocyclic ring closure occurs via a transition state whose pseudopericyclic character has been established on the basis of its magnetic properties, geometry, and NBO analysis. The 6pi-electrocyclic ring closure is energetically favored over the [2+2] cycloaddition, although the [2+2] cycloadducts are the thermodynamically controlled products. A quantitative kinetic analysis predicts that 1,3-oxazines would be the kinetically controlled products, but they should transform rapidly and totally into the [2+2] cycloadducts at room temperature. In the experimental study, a number of N-acylimino-ketenimines, in which both reactive functions are supported on an o-phenylene scaffold, have been successfully synthesized in three steps starting from 2-azidobenzoyl chloride. These compounds rapidly convert into azeto[2,1-b]quinazolin-8-ones in moderate to good yields as a result of a formal [2+2] cycloaddition.

Can the mammalian lumbar spinal cord learn a motor task?

PubMed

Hodgson, J A; Roy, R R; de Leon, R; Dobkin, B; Edgerton, V R

1994-12-01

Progress toward restoring locomotor function in low thoracic spinal transected cats and the application of similar techniques to patients with spinal cord injury is reviewed. Complete spinal cord transection (T12-T13) in adult cats results in an immediate loss of locomotor function in the hindlimbs. Limited locomotor function returns after several months in cats that have not received specific therapies designed to restore hindlimb stepping. Training transected cats to step on a treadmill for 30 min.d-1 and 5 d.wk-1 greatly improves their stepping ability. The most successful outcome was in cats where training began early, i.e., 1 wk after spinal transection. Cats trained to stand instead of stepping had great difficulty using the hindlimbs for locomotion. These effects were reversible over a 20-month period such that cats unable to step as a result of standing training could be trained to step and, conversely, locomotion in stepping-trained cats could be abolished by standing training. These results indicate that the spinal cord is capable of learning specific motor tasks. It has not been possible to elicit locomotion in patients with clinically complete spinal injuries, but appropriately coordinated EMG activity has been demonstrated in musculature of the legs during assisted locomotion on a treadmill.

Air sampling unit for breath analyzers

NASA Astrophysics Data System (ADS)

Szabra, Dariusz; Prokopiuk, Artur; Mikołajczyk, Janusz; Ligor, Tomasz; Buszewski, Bogusław; Bielecki, Zbigniew

2017-11-01

The paper presents a portable breath sampling unit (BSU) for human breath analyzers. The developed unit can be used to probe air from the upper airway and alveolar for clinical and science studies. The BSU is able to operate as a patient interface device for most types of breath analyzers. Its main task is to separate and to collect the selected phases of the exhaled air. To monitor the so-called I, II, or III phase and to identify the airflow from the upper and lower parts of the human respiratory system, the unit performs measurements of the exhaled CO2 (ECO2) in the concentration range of 0%-20% (0-150 mm Hg). It can work in both on-line and off-line modes according to American Thoracic Society/European Respiratory Society standards. A Tedlar bag with a volume of 5 dm3 is mounted as a BSU sample container. This volume allows us to collect ca. 1-25 selected breath phases. At the user panel, each step of the unit operation is visualized by LED indicators. This helps us to regulate the natural breathing cycle of the patient. There is also an operator's panel to ensure monitoring and configuration setup of the unit parameters. The operation of the breath sampling unit was preliminarily verified using the gas chromatography/mass spectrometry (GC/MS) laboratory setup. At this setup, volatile organic compounds were extracted by solid phase microextraction. The tests were performed by the comparison of GC/MS signals from both exhaled nitric oxide and isoprene analyses for three breath phases. The functionality of the unit was proven because there was an observed increase in the signal level in the case of the III phase (approximately 40%). The described work made it possible to construct a prototype of a very efficient breath sampling unit dedicated to breath sample analyzers.

Step One within Stepped Care Trauma-Focused Cognitive Behavioral Therapy for Young Children: A Pilot Study

PubMed Central

Robst, John; Scheeringa, Michael S.; Cohen, Judith A.; Wang, Wei; Murphy, Tanya K.; Tolin, David F.; Storch, Eric A.

2013-01-01

This pilot study explored the preliminary efficacy, parent acceptability and economic cost of delivering Step One within Stepped Care Trauma-Focused Cognitive Behavioral Therapy (SC-TF-CBT). Nine young children ages 3–6 years and their parents participated in SC-TF-CBT. Eighty-three percent (5/6) of the children who completed Step One treatment and 55.6 % (5/9) of the intent-to-treat sample responded to Step One. One case relapsed at post-assessment. Treatment gains were maintained at 3-month follow-up. Generally, parents found Step One to be acceptable and were satisfied with treatment. At 3-month follow-up, the cost per unit improvement for posttraumatic stress symptoms and severity ranged from $27.65 to $131.33 for the responders and from $36.12 to $208.11 for the intent-to-treat sample. Further research on stepped care for young children is warranted to examine if this approach is more efficient, accessible and cost-effective than traditional therapy. PMID:23584728

Step one within stepped care trauma-focused cognitive behavioral therapy for young children: a pilot study.

PubMed

Salloum, Alison; Robst, John; Scheeringa, Michael S; Cohen, Judith A; Wang, Wei; Murphy, Tanya K; Tolin, David F; Storch, Eric A

2014-02-01

This pilot study explored the preliminary efficacy, parent acceptability and economic cost of delivering Step One within Stepped Care Trauma-Focused Cognitive Behavioral Therapy (SC-TF-CBT). Nine young children ages 3-6 years and their parents participated in SC-TF-CBT. Eighty-three percent (5/6) of the children who completed Step One treatment and 55.6 % (5/9) of the intent-to-treat sample responded to Step One. One case relapsed at post-assessment. Treatment gains were maintained at 3-month follow-up. Generally, parents found Step One to be acceptable and were satisfied with treatment. At 3-month follow-up, the cost per unit improvement for posttraumatic stress symptoms and severity ranged from $27.65 to $131.33 for the responders and from $36.12 to $208.11 for the intent-to-treat sample. Further research on stepped care for young children is warranted to examine if this approach is more efficient, accessible and cost-effective than traditional therapy.

Estimating V0[subscript 2]max Using a Personalized Step Test

ERIC Educational Resources Information Center

Webb, Carrie; Vehrs, Pat R.; George, James D.; Hager, Ronald

2014-01-01

The purpose of this study was to develop a step test with a personalized step rate and step height to predict cardiorespiratory fitness in 80 college-aged males and females using the self-reported perceived functional ability scale and data collected during the step test. Multiple linear regression analysis yielded a model (R = 0.90, SEE = 3.43…

A hybrid-perturbation-Galerkin technique which combines multiple expansions

NASA Technical Reports Server (NTRS)

Geer, James F.; Andersen, Carl M.

1989-01-01

A two-step hybrid perturbation-Galerkin method for the solution of a variety of differential equations type problems is found to give better results when multiple perturbation expansions are employed. The method assumes that there is parameter in the problem formulation and that a perturbation method can be sued to construct one or more expansions in this perturbation coefficient functions multiplied by computed amplitudes. In step one, regular and/or singular perturbation methods are used to determine the perturbation coefficient functions. The results of step one are in the form of one or more expansions each expressed as a sum of perturbation coefficient functions multiplied by a priori known gauge functions. In step two the classical Bubnov-Galerkin method uses the perturbation coefficient functions computed in step one to determine a set of amplitudes which replace and improve upon the gauge functions. The hybrid method has the potential of overcoming some of the drawbacks of the perturbation and Galerkin methods as applied separately, while combining some of their better features. The proposed method is applied, with two perturbation expansions in each case, to a variety of model ordinary differential equations problems including: a family of linear two-boundary-value problems, a nonlinear two-point boundary-value problem, a quantum mechanical eigenvalue problem and a nonlinear free oscillation problem. The results obtained from the hybrid methods are compared with approximate solutions obtained by other methods, and the applicability of the hybrid method to broader problem areas is discussed.

Generating linear regression model to predict motor functions by use of laser range finder during TUG.

PubMed

Adachi, Daiki; Nishiguchi, Shu; Fukutani, Naoto; Hotta, Takayuki; Tashiro, Yuto; Morino, Saori; Shirooka, Hidehiko; Nozaki, Yuma; Hirata, Hinako; Yamaguchi, Moe; Yorozu, Ayanori; Takahashi, Masaki; Aoyama, Tomoki

2017-05-01

The purpose of this study was to investigate which spatial and temporal parameters of the Timed Up and Go (TUG) test are associated with motor function in elderly individuals. This study included 99 community-dwelling women aged 72.9 ± 6.3 years. Step length, step width, single support time, variability of the aforementioned parameters, gait velocity, cadence, reaction time from starting signal to first step, and minimum distance between the foot and a marker placed to 3 in front of the chair were measured using our analysis system. The 10-m walk test, five times sit-to-stand (FTSTS) test, and one-leg standing (OLS) test were used to assess motor function. Stepwise multivariate linear regression analysis was used to determine which TUG test parameters were associated with each motor function test. Finally, we calculated a predictive model for each motor function test using each regression coefficient. In stepwise linear regression analysis, step length and cadence were significantly associated with the 10-m walk test, FTSTS and OLS test. Reaction time was associated with the FTSTS test, and step width was associated with the OLS test. Each predictive model showed a strong correlation with the 10-m walk test and OLS test (P < 0.01), which was not significant higher correlation than TUG test time. We showed which TUG test parameters were associated with each motor function test. Moreover, the TUG test time regarded as the lower extremity function and mobility has strong predictive ability in each motor function test. Copyright © 2017 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

Comparing light sensitivity, linearity and step response of electronic cameras for ophthalmology.

PubMed

Kopp, O; Markert, S; Tornow, R P

2002-01-01

To develop and test a procedure to measure and compare light sensitivity, linearity and step response of electronic cameras. The pixel value (PV) of digitized images as a function of light intensity (I) was measured. The sensitivity was calculated from the slope of the P(I) function, the linearity was estimated from the correlation coefficient of this function. To measure the step response, a short sequence of images was acquired. During acquisition, a light source was switched on and off using a fast shutter. The resulting PV was calculated for each video field of the sequence. A CCD camera optimized for the near-infrared (IR) spectrum showed the highest sensitivity for both, visible and IR light. There are little differences in linearity. The step response depends on the procedure of integration and read out.

United Arab Emirates (UAE): regional and global dimensions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Nabeh, N.A.

1984-01-01

The study traces the background and development of the United Arab Emirates as a federal entity in an essentially tribal culture. It also identifies and discusses the political dynamics that form the vital region in which the Union has emerged, the function played by major regional individuals in this emergence, and the importance of this part of the Middle East in the conception of foreign policy makers of the super powers. The issues of the regional economic policies resulted in formation of the Gulf Cooperation Council (GCC) in 1981 among six Arab Gulf countries: Bahrain, Kuwait, Oman, Qatar, Saudi Arabia,more » and the United Arab Emirates. Formation of the GCC was an essential step toward the comprehensive economic development of the region. One of the conclusions is that the attainment of socio-economic and political development is not a necessary condition for the emergence of a federal structure among highly authoritarian and formalistic political systems. The emergence of the UAE took place mainly as a consequence of the conception by pertinent political elites of the inability of the emirates to individually assume the responsibilities of statehood in a highly complicated world, and in light of the poor material and human resources each commanded after over a century of dependence on a foreign power.« less

Adsorption of xenon on vicinal copper and platinum surfaces

NASA Astrophysics Data System (ADS)

Baker, Layton

The adsorption of xenon was studied on Cu(111), Cu(221), Cu(643) and on Pt(111), Pt(221), and Pt(531) using low energy electron diffraction (LEED), temperature programmed desorption (TPD) of xenon, and ultraviolet photoemission of adsorbed xenon (PAX). These experiments were performed to study the atomic and electronic structure of stepped and step-kinked, chiral metal surfaces. Xenon TPD and PAX were performed on each surface in an attempt to titrate terrace, step edge, and kink adsorption sites by adsorption energetics (TPD) and local work function differences (PAX). Due to the complex behavior of xenon on the vicinal copper and platinum metal surfaces, adsorption sites on these surfaces could not be adequately titrated by xenon TPD. On Cu(221) and Cu(643), xenon desorption from step adsorption sites was not apparent leading to the conclusion that the energy difference between terrace and step adsorption is minuscule. On Pt(221) and Pt(531), xenon TPD indicated that xenon prefers to bond at step edges and that the xenon-xenon interaction at step edges in repulsive but no further indication of step-kink adsorption was observed. The Pt(221) and Pt(531) TPD spectra indicated that the xenon overlayer undergoes strong compression near monolayer coverage on these surfaces due to repulsion between step-edge adsorbed xenon and other encroaching xenon atoms. The PAX experiments on the copper and platinum surfaces demonstrated that the step adsorption sites have lower local work functions than terrace adsorption sites and that higher step density leads to a larger separation in the local work function of terrace and step adsorption sites. The PAX spectra also indicated that, for all surfaces studied at 50--70 K, step adsorption is favored at low coverage but the step sites are not saturated until monolayer coverage is reached; this observation is due to the large entropy difference between terrace and step adsorption states and to repulsive interactions between xenon atoms adsorbed at step edges (on the platinum surfaces). The results herein provide several novel observations regarding the adsorptive behavior of xenon on vicinal copper and platinum surfaces.

Advanced methods for modeling water-levels and estimating drawdowns with SeriesSEE, an Excel add-in

USGS Publications Warehouse

Halford, Keith; Garcia, C. Amanda; Fenelon, Joe; Mirus, Benjamin B.

2012-12-21

Water-level modeling is used for multiple-well aquifer tests to reliably differentiate pumping responses from natural water-level changes in wells, or “environmental fluctuations.” Synthetic water levels are created during water-level modeling and represent the summation of multiple component fluctuations, including those caused by environmental forcing and pumping. Pumping signals are modeled by transforming step-wise pumping records into water-level changes by using superimposed Theis functions. Water-levels can be modeled robustly with this Theis-transform approach because environmental fluctuations and pumping signals are simulated simultaneously. Water-level modeling with Theis transforms has been implemented in the program SeriesSEE, which is a Microsoft® Excel add-in. Moving average, Theis, pneumatic-lag, and gamma functions transform time series of measured values into water-level model components in SeriesSEE. Earth tides and step transforms are additional computed water-level model components. Water-level models are calibrated by minimizing a sum-of-squares objective function where singular value decomposition and Tikhonov regularization stabilize results. Drawdown estimates from a water-level model are the summation of all Theis transforms minus residual differences between synthetic and measured water levels. The accuracy of drawdown estimates is limited primarily by noise in the data sets, not the Theis-transform approach. Drawdowns much smaller than environmental fluctuations have been detected across major fault structures, at distances of more than 1 mile from the pumping well, and with limited pre-pumping and recovery data at sites across the United States. In addition to water-level modeling, utilities exist in SeriesSEE for viewing, cleaning, manipulating, and analyzing time-series data.

Students' Game Performance Improvements during a Hybrid Sport Education-Step-Game-Approach Volleyball Unit

ERIC Educational Resources Information Center

Araújo, Rui; Mesquita, Isabel; Hastie, Peter; Pereira, Cristiana

2016-01-01

The purpose of this study was to examine a hybrid combination of sport education and the step-game-approach (SGA) on students' gameplay performance in volleyball, taking into account their sex and skill-level. Seventeen seventh-grade students (seven girls, 10 boys, average age 11.8) participated in a 25-lesson volleyball season, in which the…

Adult Learners: Relationships of Reading, MCAT, and USMLE Step 1 Test Results for Medical Students.

ERIC Educational Resources Information Center

Haught, Patricia A.; Walls, Richard T.

This study examined the possible relationship between scores on the Nelson-Denny Reading Test (current forms G and H) and performance on the Medical College Admissions Test (MCAT) and the United States Medical Licensing Examination (USMLE) Step 1 examination scores. Participants were 730 medical students at a mid-Atlantic university, and for 572…

A Guide for Developing Standard Operating Job Procedures for the Digestion Process Wastewater Treatment Facility. SOJP No. 10.

ERIC Educational Resources Information Center

Schwing, Carl M.

This guide describes standard operating job procedures for the digestion process of wastewater treatment facilities. This process is for reducing the volume of sludge to be treated in subsequent units and to reduce the volatile content of sludge. The guide gives step-by-step instructions for pre-startup, startup, continuous operating, shutdown,…

Transistor step stress testing program for JANTX2N2484

NASA Technical Reports Server (NTRS)

1979-01-01

The effect of power/temperature step stress when applied to the transistor JANTX2N2484, manufactured by Raytheon and Teledyne was evaluated. Forty-eight samples from each manufacturer were divided equally (16 per group) into three groups and submitted to the processes outlined. In addition, two control sample units were maintained for verification of the electrical parametric testing.

36 CFR § 1280.2 - What property is under the control of the Archivist of the United States?

Code of Federal Regulations, 2013 CFR

2013-07-01

... the building; (2) On the 7th Street, 9th Street, and Constitution Avenue, NW, sides of the building... sidewalks and other grounds, the steps leading up to the Constitution Avenue entrance, the Constitution Avenue entrance, and the portico area between the steps and the Constitution Avenue entrance. (3) The...

Performance analysis and optimization of radiating fins with a step change in thickness and variable thermal conductivity by homotopy perturbation method

NASA Astrophysics Data System (ADS)

Arslanturk, Cihat

2011-02-01

Although tapered fins transfer more rate of heat per unit volume, they are not found in every practical application because of the difficulty in manufacturing and fabrications. Therefore, there is a scope to modify the geometry of a constant thickness fin in view of the less difficulty in manufacturing and fabrication as well as betterment of heat transfer rate per unit volume of the fin material. For the better utilization of fin material, it is proposed a modified geometry of new fin with a step change in thickness (SF) in the literature. In the present paper, the homotopy perturbation method has been used to evaluate the temperature distribution within the straight radiating fins with a step change in thickness and variable thermal conductivity. The temperature profile has an abrupt change in the temperature gradient where the step change in thickness occurs and thermal conductivity parameter describing the variation of thermal conductivity has an important role on the temperature profile and the heat transfer rate. The optimum geometry which maximizes the heat transfer rate for a given fin volume has been found. The derived condition of optimality gives an open choice to the designer.

Deficit of state-dependent risk attitude modulation in gambling disorder

PubMed Central

Fujimoto, A; Tsurumi, K; Kawada, R; Murao, T; Takeuchi, H; Murai, T; Takahashi, H

2017-01-01

Gambling disorder (GD) is often considered as a problem of trait-like risk preference. However, the symptoms of GD cannot be fully understood by this trait view. In the present study, we hypothesized that GD patients also had problem with a flexible control of risk attitude (state-dependent strategy optimization), and aimed to investigate the mechanisms underlying abnormal risk-taking of GD. To address this issue, we tested GD patients without comorbidity (GD group: n=21) and age-matched healthy control participants (HC group: n=29) in a multi-step gambling task, in which participants needed to clear ‘block quota' (required units to clear a block, 1000–7000 units) in 20 choices, and conducted a task-functional magnetic resonance imaging (fMRI) experiment. Behavioral analysis indeed revealed a less flexible risk-attitude change in the GD group; the GD group failed to avoid risky choice in a specific quota range (low-quota condition), in which risky strategy was not optimal to solve the quota. Accordingly, fMRI analysis highlighted diminished functioning of the dorsolateral prefrontal cortex (dlPFC), which has been heavily implicated in cognitive flexibility. To our knowledge, the present study provided the first empirical evidence of a deficit of state-dependent strategy optimization in GD. Focusing on flexible control of risk attitude under quota may contribute to a better understanding of the psychopathology of GDs. PMID:28375207

Reconstructing Solvent Density of Myoglobin Unit Cell from Proximal Radial Distribution Functions of Amino Acids

NASA Astrophysics Data System (ADS)

Galbraith, Madeline; Lynch, Gc; Pettitt, Bm

Understanding the solvent density around a protein crystal structure is an important step for refining accurate crystal structures for use in dynamics simulations or in free energy calculations. The free energy of solvation has typically been approximated using an implicit continuum solvent model or an all atom MD simulation, with a trade-off between accuracy and computation time. For proteins, using precomputed proximal radial distribution functions (pRDFs) of the solvent to reconstruct solvent density on a grid is much faster than all atom MD simulations and more accurate than using implicit solvent models. MD simulations were run for the 20 common amino acids and pRDFs were calculated for several atom type data sets with and without hydrogens, using atom types representative of amino acid side chain atoms. Preliminary results from reconstructions suggest using a data set with 15 heavy atoms and 3 hydrogen yields results with the lowest error without a tradeoff on time. The results of using precomputed pRDFs to reconstruct the solvent density of water for the myoglobin (pdb ID 2mgk) unit cell quantifies the accuracy of the method in comparison with the crystallographic data. Funding Acknowledgement: This research was funded by the CPRIT Summer Undergraduate Program in Computational Cancer Biology, training Grant award RP 140113 from the Cancer Prevention & Research Institute of Texas (CPRIT).

Deficit of state-dependent risk attitude modulation in gambling disorder.

PubMed

Fujimoto, A; Tsurumi, K; Kawada, R; Murao, T; Takeuchi, H; Murai, T; Takahashi, H

2017-04-04

Gambling disorder (GD) is often considered as a problem of trait-like risk preference. However, the symptoms of GD cannot be fully understood by this trait view. In the present study, we hypothesized that GD patients also had problem with a flexible control of risk attitude (state-dependent strategy optimization), and aimed to investigate the mechanisms underlying abnormal risk-taking of GD. To address this issue, we tested GD patients without comorbidity (GD group: n=21) and age-matched healthy control participants (HC group: n=29) in a multi-step gambling task, in which participants needed to clear 'block quota' (required units to clear a block, 1000-7000 units) in 20 choices, and conducted a task-functional magnetic resonance imaging (fMRI) experiment. Behavioral analysis indeed revealed a less flexible risk-attitude change in the GD group; the GD group failed to avoid risky choice in a specific quota range (low-quota condition), in which risky strategy was not optimal to solve the quota. Accordingly, fMRI analysis highlighted diminished functioning of the dorsolateral prefrontal cortex (dlPFC), which has been heavily implicated in cognitive flexibility. To our knowledge, the present study provided the first empirical evidence of a deficit of state-dependent strategy optimization in GD. Focusing on flexible control of risk attitude under quota may contribute to a better understanding of the psychopathology of GDs.

Gait parameters are differently affected by concurrent smartphone-based activities with scaled levels of cognitive effort.

PubMed

Caramia, Carlotta; Bernabucci, Ivan; D'Anna, Carmen; De Marchis, Cristiano; Schmid, Maurizio

2017-01-01

The widespread and pervasive use of smartphones for sending messages, calling, and entertainment purposes, mainly among young adults, is often accompanied by the concurrent execution of other tasks. Recent studies have analyzed how texting, reading or calling while walking-in some specific conditions-might significantly influence gait parameters. The aim of this study is to examine the effect of different smartphone activities on walking, evaluating the variations of several gait parameters. 10 young healthy students (all smartphone proficient users) were instructed to text chat (with two different levels of cognitive load), call, surf on a social network or play with a math game while walking in a real-life outdoor setting. Each of these activities is characterized by a different cognitive load. Using an inertial measurement unit on the lower trunk, spatio-temporal gait parameters, together with regularity, symmetry and smoothness parameters, were extracted and grouped for comparison among normal walking and different dual task demands. An overall significant effect of task type on the aforementioned parameters group was observed. The alterations in gait parameters vary as a function of cognitive effort. In particular, stride frequency, step length and gait speed show a decrement, while step time increases as a function of cognitive effort. Smoothness, regularity and symmetry parameters are significantly altered for specific dual task conditions, mainly along the mediolateral direction. These results may lead to a better understanding of the possible risks related to walking and concurrent smartphone use.

Gait parameters are differently affected by concurrent smartphone-based activities with scaled levels of cognitive effort

PubMed Central

Bernabucci, Ivan; D'Anna, Carmen; De Marchis, Cristiano; Schmid, Maurizio

2017-01-01

The widespread and pervasive use of smartphones for sending messages, calling, and entertainment purposes, mainly among young adults, is often accompanied by the concurrent execution of other tasks. Recent studies have analyzed how texting, reading or calling while walking–in some specific conditions–might significantly influence gait parameters. The aim of this study is to examine the effect of different smartphone activities on walking, evaluating the variations of several gait parameters. 10 young healthy students (all smartphone proficient users) were instructed to text chat (with two different levels of cognitive load), call, surf on a social network or play with a math game while walking in a real-life outdoor setting. Each of these activities is characterized by a different cognitive load. Using an inertial measurement unit on the lower trunk, spatio-temporal gait parameters, together with regularity, symmetry and smoothness parameters, were extracted and grouped for comparison among normal walking and different dual task demands. An overall significant effect of task type on the aforementioned parameters group was observed. The alterations in gait parameters vary as a function of cognitive effort. In particular, stride frequency, step length and gait speed show a decrement, while step time increases as a function of cognitive effort. Smoothness, regularity and symmetry parameters are significantly altered for specific dual task conditions, mainly along the mediolateral direction. These results may lead to a better understanding of the possible risks related to walking and concurrent smartphone use. PMID:29023456

Automatic sequencing and control of Space Station airlock operations

NASA Technical Reports Server (NTRS)

Himel, Victor; Abeles, Fred J.; Auman, James; Tqi, Terry O.

1989-01-01

Procedures that have been developed as part of the NASA JSC-sponsored pre-prototype Checkout, Servicing and Maintenance (COSM) program for pre- and post-EVA airlock operations are described. This paper addresses the accompanying pressure changes in the airlock and in the Advanced Extravehicular Mobility Unit (EMU). Additionally, the paper focuses on the components that are checked out, and includes the step-by-step sequences to be followed by the crew, the required screen displays and prompts that accompany each step, and a description of the automated processes that occur.

Managing Highway Maintenance: Budget Preparation, Unit 9, Level 3.

ERIC Educational Resources Information Center

Federal Highway Administration (DOT), Washington, DC. Offices of Research and Development.

Part of the series "Managing Highway Maintenance," the unit describes the essential steps in developing a maintenance budget, or performance budget, based on the work to be done. It is designed for field engineers and supervisors who assist department officials in preparing work programs and budgets. The format is a programed,…

Managing Highway Maintenance: Maintenance Management--by Objectives, Unit 10, Level 2.

ERIC Educational Resources Information Center

Federal Highway Administration (DOT), Washington, DC. Offices of Research and Development.

Part of the series "Managing Highway Maintenance," the unit deals with management by objectives--its definition, how it works, and necessary steps for application. It is designed for maintenance supervisors who are familiar with maintenance management systems. The format is a programed, self-instructional approach in which questions are…

Proposing an amendment to the Constitution of the United States regarding the right of all citizens of the United States to a public education of equal high quality.

THOMAS, 111th Congress

Rep. Jackson, Jesse L., Jr. [D-IL-2

2009-03-03

House - 03/16/2009 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Food Marketing: Cashier-Checker. Student Material. Competency Based Curriculum.

ERIC Educational Resources Information Center

Froelich, Larry; And Others

This curriculum for food marketing (cashier-checking) is designed to provide entry-level employment skills. It is organized into 13 units which contain one to ten competencies. A student competency sheet provided for each competency is organized into this format: unit and competency number and name, learning steps, learning activities, and…

A resolution welcoming the Prime Minister of India to the United States for meetings to advance the United States-India partnership.

THOMAS, 113th Congress

Sen. Warner, Mark R. [D-VA

2013-09-25

Senate - 09/25/2013 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

To remove from the John H. Chafee Coastal Barrier Resources System the areas included in Indian Peninsula Unit FL-92 and Cape San Blas Unit P-30 in Florida.

THOMAS, 112th Congress

Rep. Southerland, Steve II [R-FL-2

2012-03-07

House - 03/09/2012 Referred to the Subcommittee on Fisheries, Wildlife, Oceans, and Insular Affairs. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

To remove from the John H. Chafee Coastal Barrier Resources System the areas included in Indian Peninsula Unit FL-92 and Cape San Blas Unit P-30 in Florida.

THOMAS, 113th Congress

Rep. Southerland, Steve II [R-FL-2

2013-03-04

House - 03/07/2013 Referred to the Subcommittee on Fisheries, Wildlife, Oceans, and Insular Affairs. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Peenemunde Rocket Team Reunion

NASA Technical Reports Server (NTRS)

1987-01-01

The Peenemunde Rocket Team reunited on the steps of Marshall Space Flight Center's (MSFC) Headquarter Building 4200 for a reunion. The Peenemunde Rocket team were first assembled in Germany prior to World War II. They came to the United States at the end of the War and became the nucleus of the United States Army's rocket program.

Pedestrian Choice Behavior at Shopping Mall Intersections in China and the United States

ERIC Educational Resources Information Center

Bitgood, Stephen; Davey, Gareth; Huang, Xiaoyi; Fung, Holly

2013-01-01

Pedestrian navigation through public spaces reflects the nature of interaction between behavior and environment. This study compared pedestrian choice behavior at shopping mall intersections in China and the United States. The study found that in both countries (a) pedestrians chose movement patterns that involved the fewest steps and (b) there…

To designate the Federal building and United States courthouse located at 300 Fayetteville Street in Raleigh, North Carolina, as the "Jesse Helms Federal Building and United States Courthouse".

THOMAS, 112th Congress

Rep. Ellmers, Renee L. [R-NC-2

2012-11-27

House - 11/28/2012 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

ACHP | News

Science.gov Websites

Report to Congress on Historic Post Offices The public is invited to submit comments to the Advisory Council on Historic Preservation (ACHP) in order to inform its report to Congress on the United State Appropriations Act of 2014 to develop this report on appropriate steps to ensure that the United States Postal

76 FR 17962 - Strengthening the Scientific Understanding of Climate Change Impacts on Freshwater Resources of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-31

... Understanding of Climate Change Impacts on Freshwater Resources of the United States AGENCY: U.S. Geological... Scientific Understanding of Climate Change Impacts on Freshwater Resources of the United States''. The report reviews key issues related to freshwater resource data and climate change and identifies next steps to...

To designate the United States courthouse located at 501 East Court Street in Jackson, Mississippi, as the "R. Jess Brown United States Courthouse".

THOMAS, 113th Congress

Rep. Thompson, Bennie G. [D-MS-2

2013-02-06

Senate - 12/09/2014 Received in the Senate and Read twice and referred to the Committee on Homeland Security and Governmental Affairs. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

To designate the Federal Building and United States Courthouse located at 1125 Chapline Street in Wheeling, West Virginia, as the "Frederick P. Stamp, Jr. Federal Building and United States Courthouse".

THOMAS, 113th Congress

Rep. McKinley, David B. [R-WV-1

2013-02-12

House - 02/13/2013 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Pressure Swing Adsorption in the Unit Operations Laboratory

ERIC Educational Resources Information Center

Ganley, Jason

2018-01-01

This paper describes a student laboratory in the Unit Operations Laboratory at the Colorado School of Mines: air separation by pressure swing adsorption. The flexibility of the system enables students to study the production of enriched nitrogen or oxygen streams. Automatic data acquisition permits the study of cycle steps and performance.…

Proposing an amendment to the Constitution of the United States to give citizens of the United States the right to propose amendments to the Constitution by an initiative process.

THOMAS, 111th Congress

Rep. Hoekstra, Peter [R-MI-2

2010-01-21

House - 03/01/2010 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

40 CFR 59.628 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2010 CFR

2010-07-01

... unit, include all of the following: (i) The emission-data unit's construction, including its origin and buildup, steps you took to ensure that it represents production containers, any components you built... warranty report summarizing successful warranty claims by emission family under § 59.612, including the...

40 CFR 59.628 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2012 CFR

2012-07-01

... unit, include all of the following: (i) The emission-data unit's construction, including its origin and buildup, steps you took to ensure that it represents production containers, any components you built... warranty report summarizing successful warranty claims by emission family under § 59.612, including the...

40 CFR 59.628 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2014 CFR

2014-07-01

... unit, include all of the following: (i) The emission-data unit's construction, including its origin and buildup, steps you took to ensure that it represents production containers, any components you built... warranty report summarizing successful warranty claims by emission family under § 59.612, including the...

40 CFR 59.628 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2013 CFR

2013-07-01

... unit, include all of the following: (i) The emission-data unit's construction, including its origin and buildup, steps you took to ensure that it represents production containers, any components you built... warranty report summarizing successful warranty claims by emission family under § 59.612, including the...

To designate the United States courthouse located at 131 East 4th Street in Davenport, Iowa, as the "James A. Leach United States Courthouse".

THOMAS, 111th Congress

Rep. Loebsack, David [D-IA-2

2009-02-04

Senate - 03/11/2009 Received in the Senate and Read twice and referred to the Committee on Environment and Public Works. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Atomic layer confined vacancies for atomic-level insights into carbon dioxide electroreduction

NASA Astrophysics Data System (ADS)

Gao, Shan; Sun, Zhongti; Liu, Wei; Jiao, Xingchen; Zu, Xiaolong; Hu, Qitao; Sun, Yongfu; Yao, Tao; Zhang, Wenhua; Wei, Shiqiang; Xie, Yi

2017-02-01

The role of oxygen vacancies in carbon dioxide electroreduction remains somewhat unclear. Here we construct a model of oxygen vacancies confined in atomic layer, taking the synthetic oxygen-deficient cobalt oxide single-unit-cell layers as an example. Density functional theory calculations demonstrate the main defect is the oxygen(II) vacancy, while X-ray absorption fine structure spectroscopy reveals their distinct oxygen vacancy concentrations. Proton transfer is theoretically/experimentally demonstrated to be a rate-limiting step, while energy calculations unveil that the presence of oxygen(II) vacancies lower the rate-limiting activation barrier from 0.51 to 0.40 eV via stabilizing the formate anion radical intermediate, confirmed by the lowered onset potential from 0.81 to 0.78 V and decreased Tafel slope from 48 to 37 mV dec-1. Hence, vacancy-rich cobalt oxide single-unit-cell layers exhibit current densities of 2.7 mA cm-2 with ca. 85% formate selectivity during 40-h tests. This work establishes a clear atomic-level correlation between oxygen vacancies and carbon dioxide electroreduction.

A preliminary crystallographic analysis of the putative mevalonate diphosphate decarboxylase from Trypanosoma brucei

DOE Office of Scientific and Technical Information (OSTI.GOV)

Byres, Emma; Martin, David M. A.; Hunter, William N., E-mail: w.n.hunter@dundee.ac.uk

2005-06-01

The gene encoding the putative mevalonate diphosphate decarboxylase, an enzyme from the mevalonate pathway of isoprenoid precursor biosynthesis, has been cloned from T. brucei. Recombinant protein has been expressed, purified and highly ordered crystals obtained and characterized to aid the structure–function analysis of this enzyme. Mevalonate diphosphate decarboxylase catalyses the last and least well characterized step in the mevalonate pathway for the biosynthesis of isopentenyl pyrophosphate, an isoprenoid precursor. A gene predicted to encode the enzyme from Trypanosoma brucei has been cloned, a highly efficient expression system established and a purification protocol determined. The enzyme gives monoclinic crystals in spacemore » group P2{sub 1}, with unit-cell parameters a = 51.5, b = 168.7, c = 54.9 Å, β = 118.8°. A Matthews coefficient V{sub M} of 2.5 Å{sup 3} Da{sup −1} corresponds to two monomers, each approximately 42 kDa (385 residues), in the asymmetric unit with 50% solvent content. These crystals are well ordered and data to high resolution have been recorded using synchrotron radiation.« less

Gas-engine-based, low-emission cogeneration units

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chellini, R.

1994-04-01

Continental Energy Systems (CES) of Westmalle, Belgium, has been specializing, since its foundation in 1983, in the supply of cogeneration packages in the 50-300 KW power range. CES activity is mainly concentrated in the transformation of Valmet, Scania, Iveco and MAN diesel engines into spark-ignited engines capable of running on natural gas, CNG, LPG, biogas, landfill gas, etc. In the upper power range they also package Waukesha gas engines supplied from the Dutch plant of the American engine manufacturer. The new closed-loop combustion control system allows engines in the naturally-aspirated or turbocharged configuration with catalytic converters to operate well belowmore » Euro 2 limits. In fact, these engines already comply with 1995 CARB (California Air Resources Board) emission limits and with those that will become mandatory in Europe with the 1996 step. The new system still makes use of conventional components for metering and mixing functions, but these are considered as three separate devices; the electronic control unit, the oxygen sensor and an actuator enabling closed loop air/fuel ratio control. 4 figs.« less

Crystallization and preliminary X-ray analysis of a native human tRNA synthetase whose allelic variants are associated with Charcot–Marie–Tooth disease

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Wei; Schimmel, Paul; Yang, Xiang-Lei, E-mail: xlyang@scripps.edu

2006-12-01

Crystallization and preliminary X-ray analysis of a native human tRNA synthetase whose allelic variants are associated with Charcot–Marie–Tooth Disease. Glycyl-tRNA synthetase (GlyRS) is one of a group of enzymes that catalyze the synthesis of aminoacyl-tRNAs for translation. Mutations of human and mouse GlyRSs are causally associated with Charcot–Marie–Tooth disease, the most common genetic disorder of the peripheral nervous system. As the first step towards a structure–function analysis of this disease, native human GlyRS was expressed, purified and crystallized. The crystal belonged to space group P4{sub 3}2{sub 1}2 or its enantiomorphic space group P4{sub 1}2{sub 1}2, with unit-cell parameters a =more » b = 91.74, c = 247.18 Å, and diffracted X-rays to 3.0 Å resolution. The asymmetric unit contained one GlyRS molecule and had a solvent content of 69%.« less

Seismic Discontinuities beneath the Southwestern United States from S Receiver Functions

NASA Astrophysics Data System (ADS)

Akanbi, O. E.; Li, A.

2015-12-01

S- Receiver functions along the Colorado Plateau-Rio Grande Rift-Great Plains Transect known as La RISTRA in the southwestern United States have been utilized to map the Moho and lithosphere-asthenosphere boundary (LAB) beneath this tectonically active region. The receiver functions were stacked according to ray piercing points with moveout corrections in order to improve the signal-to-noise ratio of converted S-to-P phases. The Moho appears at 30-40 km beneath the Rio Grande Rift (RGR) and deepens to 35-45 km beneath the Great Plains (GP) and the Colorado Plateau (CP). A sharp discontinuity is observed along the profile with the average depth of 80 km beneath the RGR, 100 km beneath the GP, and 160 km beneath the CP. This discontinuity is consistent with the top of a low velocity zone in a shear wave model beneath the array and is interpreted as the LAB. Strong phases imaged at ~90 km beneath the CP and GP could be a combination of side-lobes of the Moho conversions and primary Sp phases from a mid-lithosphere discontinuity (MLD). The relatively shallow Moho and LAB beneath the Rio Grande Rift is indicative of lithosphere extension and asthenosphere upwarp. In addition, the LAB shows depth-step depressions at the RGR-CP and RGR-GP boundaries, providing evidence for mantle downwelling. The variation of the lithospheric depth across the RISTRA array supports that edge-driven, small-scale mantle convection is largely responsible for the recent extension and uplift in the Rio Grande Rift and the Colorado Plateau.

Adaptive-optics optical coherence tomography processing using a graphics processing unit.

PubMed

Shafer, Brandon A; Kriske, Jeffery E; Kocaoglu, Omer P; Turner, Timothy L; Liu, Zhuolin; Lee, John Jaehwan; Miller, Donald T

2014-01-01

Graphics processing units are increasingly being used for scientific computing for their powerful parallel processing abilities, and moderate price compared to super computers and computing grids. In this paper we have used a general purpose graphics processing unit to process adaptive-optics optical coherence tomography (AOOCT) images in real time. Increasing the processing speed of AOOCT is an essential step in moving the super high resolution technology closer to clinical viability.

A resolution recognizing the importance and sustainability of the United States hardwoods industry and urging that United States hardwoods and the products derived from United States hardwoods be given full consideration in any program to promote construction of environmentally preferable commercial, public, or private buildings.

THOMAS, 111th Congress

Sen. Lincoln, Blanche L. [D-AR

2010-02-09

Senate - 08/05/2010 Resolution agreed to in Senate without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

Iran: Politics, Human Rights, and U.S. Policy

DTIC Science & Technology

2017-02-17

Revolution in Iran in 1979, the United States and Iran have been at odds politically and diplomatically, and U.S. policy has been intended to reduce the...the potential for Iran to develop a nuclear weapon increased. Beginning in 2010, the United States orchestrated broad international economic pressure...characterized Iran as an adversary of the United States and stated a commitment to countering Iran’s regional influence – although without taking steps that

The net benefits of human-ignited wildfire forecasting: the case of tribal land units in the United States

Treesearch

Jeff Prestemon; David T. Butry; Douglas S. Thomas

2016-01-01

Research shows that some categories of human-ignited wildfires may be forecastable, owing to their temporal clustering, with the possibility that resources could be predeployed to help reduce the incidence of such wildfires. We estimated several kinds of incendiary and other human-ignited wildfire forecast models at the weekly time step for tribal land units in the...

Watershed Dynamics: Using Web-based GIS to Access Data and Study the Hydrosphere

NASA Astrophysics Data System (ADS)

Buzby, C. K.; Jona, K.

2010-12-01

The Watershed Dynamics project has developed online GIS tools and curriculum to provide high school earth science students with access to data and analysis tools to perform investigations on their local watershed. Using FieldScope web-based GIS tools from National Geographic, students investigate precipitation, stream discharge, and land cover data for the US. Students use the data to study water availability across the US and the world, human impacts on the watershed, and more. Curriculum developers at the Office of STEM Education Partnerships (OSEP) at Northwestern University and the GLOBE Program have created two complete units which scaffold students on their way to independent research using GIS. In the Water Availability unit, students work with precipitation, evaporation, and surface runoff to investigate the water cycle and how it varies regionally and seasonally. In the Human Impact unit, students analyze land cover change over time and investigate stream discharge to figure out how humans are impacting their watershed. These units can be used together or individually, but provide students progressively more research independence, leading them to ask their own questions about the watershed using GIS data. Both units have been pilot tested in high school classrooms and found to be successful at increasing student content knowledge about the water cycle. They are being modified for use at the undergraduate level. The web-based GIS interface has the functionality of desktop GIS, but allows for a simpler user-experience and direct links to relevant data. Students can use these tools to learn scientific content and as a stepping-stone for further GIS investigations.

Kinetic dissection of individual steps in the poly(C)-directed oligoguanylate synthesis from guanosine 5'-monophosphate 2-methylimidazolide

NASA Technical Reports Server (NTRS)

Kanavarioti, A.; Bernasconi, C. F.; Alberas, D. J.; Baird, E. E.

1993-01-01

A kinetic study of oligoguanylate synthesis on a polycytidylate template, poly(C), as a function of the concentration of the activated monomer, guanosine 5'-monophosphate 2-methylimidazolide, 2-MeImpG, is reported. Reactions were run with 0.005-0.045 M 2-MeImpG in the presence of 0.05 M poly(C) at 23 degrees C. The kinetic results are consistent with a reaction scheme (eq 1) that consists of a series of consecutive steps, each step representing the addition of one molecule of 2-MeImpG to the growing oligomer. This scheme allows the calculation of second-order rate constants for every step by analyzing the time-dependent growth of each oligomer. Computer simulations of the course of reaction based on the determined rate constants and eq 1 are in excellent agreement with the product distributions seen in the HPLC profiles. In accord with an earlier study (Fakhrai, H.; Inoue, T.; Orgel, L. E. Tetrahedron 1984, 40, 39), rate constants, ki, for the formation of the tetramer and longer oligomers up to the 16-mer were found to be independent of length and somewhat higher than k3 (formation of trimer), which in turn is much higher than k2 (formation of dimer). The ki (i > or = 4), k3, and k2 values are not true second-order rate constants but vary with monomer concentration. Mechanistic models for the dimerization (Scheme I) and elongation reactions (Scheme II) are proposed that are consistent with our results. These models take into account that the monomer associates with the template in a cooperative manner. Our kinetic analysis allowed the determination of rate constants for the elementary processes of covalent bond formation between two monomers (dimerization) and between an oligomer and a monomer (elongation) on the template. A major conclusion from our study is that bond formation between two monomer units or between a primer and a monomer is assisted by the presence of additional next-neighbor monomer units. This is consistent with recent findings with hairpin oligonucleotides (Wu, T.; Orgel, L. E. J. Am. Chem. Soc. 1992, 114, 317). Our study is the first of its kind that shows the feasibility of a thorough kinetic analysis of a template-directed oligomerization and provides a detailed mechanistic model of these reactions.

Direct analysis of terpenes from biological buffer systems using SESI and IR-MALDESI.

PubMed

Nazari, Milad; Malico, Alexandra A; Ekelöf, Måns; Lund, Sean; Williams, Gavin J; Muddiman, David C

2018-01-01

Terpenes are the largest class of natural products with a wide range of applications including use as pharmaceuticals, fragrances, flavorings, and agricultural products. Terpenes are biosynthesized by the condensation of a variable number of isoprene units resulting in linear polyisoprene diphosphate units, which can then be cyclized by terpene synthases into a range of complex structures. While these cyclic structures have immense diversity and potential in different applications, their direct analysis in biological buffer systems requires intensive sample preparation steps such as salt cleanup, extraction with organic solvents, and chromatographic separations. Electrospray post-ionization can be used to circumvent many sample cleanup and desalting steps. SESI and IR-MALDESI are two examples of ionization methods that employ electrospray post-ionization at atmospheric pressure and temperature. By coupling the two techniques and doping the electrospray solvent with silver ions, olefinic terpenes of different classes and varying degrees of volatility were directly analyzed from a biological buffer system with no sample workup steps.

Evolution of optimal Hill coefficients in nonlinear public goods games.

PubMed

Archetti, Marco; Scheuring, István

2016-10-07

In evolutionary game theory, the effect of public goods like diffusible molecules has been modelled using linear, concave, sigmoid and step functions. The observation that biological systems are often sigmoid input-output functions, as described by the Hill equation, suggests that a sigmoid function is more realistic. The Michaelis-Menten model of enzyme kinetics, however, predicts a concave function, and while mechanistic explanations of sigmoid kinetics exist, we lack an adaptive explanation: what is the evolutionary advantage of a sigmoid benefit function? We analyse public goods games in which the shape of the benefit function can evolve, in order to determine the optimal and evolutionarily stable Hill coefficients. We find that, while the dynamics depends on whether output is controlled at the level of the individual or the population, intermediate or high Hill coefficients often evolve, leading to sigmoid input-output functions that for some parameters are so steep to resemble a step function (an on-off switch). Our results suggest that, even when the shape of the benefit function is unknown, biological public goods should be modelled using a sigmoid or step function rather than a linear or concave function. Copyright © 2016 Elsevier Ltd. All rights reserved.

Laser Consolidation - A Novel One-Step Manufacturing Process for Making Net-Shape Functional Components

DTIC Science & Technology

2006-05-01

dies. This process uses a laser beam to melt a controlled amount of injected powder on a base plate to deposit the first layer and on previous passes...Consolidation” to build functional net-shape components directly from metallic powder in one step [1-3]. The laser consolidation is a one-step computer-aided...A focused laser beam is irradiated on the substrate to create a molten pool, while metallic powder is injected simultaneously into the pool. A

Functional Communication Training in Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Battaglia, Dana

2017-01-01

This article explicitly addresses the correlation between communication and behavior, and describes how to provide intervention addressing these two overlapping domains using an intervention called functional communication training (FCT; E. G. Carr & Durand, 1985) in individuals with ASD. A step-by-step process is outlined with supporting…

Functional Fault Modeling of a Cryogenic System for Real-Time Fault Detection and Isolation

NASA Technical Reports Server (NTRS)

Ferrell, Bob; Lewis, Mark; Perotti, Jose; Oostdyk, Rebecca; Brown, Barbara

2010-01-01

The purpose of this paper is to present the model development process used to create a Functional Fault Model (FFM) of a liquid hydrogen (L H2) system that will be used for realtime fault isolation in a Fault Detection, Isolation and Recover (FDIR) system. The paper explains th e steps in the model development process and the data products required at each step, including examples of how the steps were performed fo r the LH2 system. It also shows the relationship between the FDIR req uirements and steps in the model development process. The paper concl udes with a description of a demonstration of the LH2 model developed using the process and future steps for integrating the model in a live operational environment.

The Influence of Preprocessing Steps on Graph Theory Measures Derived from Resting State fMRI

PubMed Central

Gargouri, Fatma; Kallel, Fathi; Delphine, Sebastien; Ben Hamida, Ahmed; Lehéricy, Stéphane; Valabregue, Romain

2018-01-01

Resting state functional MRI (rs-fMRI) is an imaging technique that allows the spontaneous activity of the brain to be measured. Measures of functional connectivity highly depend on the quality of the BOLD signal data processing. In this study, our aim was to study the influence of preprocessing steps and their order of application on small-world topology and their efficiency in resting state fMRI data analysis using graph theory. We applied the most standard preprocessing steps: slice-timing, realign, smoothing, filtering, and the tCompCor method. In particular, we were interested in how preprocessing can retain the small-world economic properties and how to maximize the local and global efficiency of a network while minimizing the cost. Tests that we conducted in 54 healthy subjects showed that the choice and ordering of preprocessing steps impacted the graph measures. We found that the csr (where we applied realignment, smoothing, and tCompCor as a final step) and the scr (where we applied realignment, tCompCor and smoothing as a final step) strategies had the highest mean values of global efficiency (eg). Furthermore, we found that the fscr strategy (where we applied realignment, tCompCor, smoothing, and filtering as a final step), had the highest mean local efficiency (el) values. These results confirm that the graph theory measures of functional connectivity depend on the ordering of the processing steps, with the best results being obtained using smoothing and tCompCor as the final steps for global efficiency with additional filtering for local efficiency. PMID:29497372

The Influence of Preprocessing Steps on Graph Theory Measures Derived from Resting State fMRI.

PubMed

Gargouri, Fatma; Kallel, Fathi; Delphine, Sebastien; Ben Hamida, Ahmed; Lehéricy, Stéphane; Valabregue, Romain

2018-01-01

Resting state functional MRI (rs-fMRI) is an imaging technique that allows the spontaneous activity of the brain to be measured. Measures of functional connectivity highly depend on the quality of the BOLD signal data processing. In this study, our aim was to study the influence of preprocessing steps and their order of application on small-world topology and their efficiency in resting state fMRI data analysis using graph theory. We applied the most standard preprocessing steps: slice-timing, realign, smoothing, filtering, and the tCompCor method. In particular, we were interested in how preprocessing can retain the small-world economic properties and how to maximize the local and global efficiency of a network while minimizing the cost. Tests that we conducted in 54 healthy subjects showed that the choice and ordering of preprocessing steps impacted the graph measures. We found that the csr (where we applied realignment, smoothing, and tCompCor as a final step) and the scr (where we applied realignment, tCompCor and smoothing as a final step) strategies had the highest mean values of global efficiency (eg) . Furthermore, we found that the fscr strategy (where we applied realignment, tCompCor, smoothing, and filtering as a final step), had the highest mean local efficiency (el) values. These results confirm that the graph theory measures of functional connectivity depend on the ordering of the processing steps, with the best results being obtained using smoothing and tCompCor as the final steps for global efficiency with additional filtering for local efficiency.

Dynamic and Personalized Risk Forecast in Step-Down Units. Implications for Monitoring Paradigms.

PubMed

Chen, Lujie; Ogundele, Olufunmilayo; Clermont, Gilles; Hravnak, Marilyn; Pinsky, Michael R; Dubrawski, Artur W

2017-03-01

Cardiorespiratory insufficiency (CRI) is a term applied to the manifestations of loss of normal cardiorespiratory reserve and portends a bad outcome. CRI occurs commonly in hospitalized patients, but its risk escalation patterns are unexplored. To describe the dynamic and personal character of CRI risk evolution observed through continuous vital sign monitoring of individual step-down unit patients. Using a machine learning model, we estimated risk trends for CRI (defined as exceedance of vital sign stability thresholds) for each of 1,971 admissions (1,880 unique patients) to a 24-bed adult surgical trauma step-down unit at an urban teaching hospital in Pittsburgh, Pennsylvania using continuously recorded vital signs from standard bedside monitors. We compared and contrasted risk trends during initial 4-hour periods after step-down unit admission, and again during the 4 hours immediately before the CRI event, between cases (ever had a CRI) and control subjects (never had a CRI). We further explored heterogeneity of risk escalation patterns during the 4 hours before CRI among cases, comparing personalized to nonpersonalized risk. Estimated risk was significantly higher for cases (918) than control subjects (1,053; P ≤ 0.001) during the initial 4-hour stable periods. Among cases, the aggregated nonpersonalized risk trend increased 2 hours before the CRI, whereas the personalized risk trend became significantly different from control subjects 90 minutes ahead. We further discovered several unique phenotypes of risk escalation patterns among cases for nonpersonalized (14.6% persistently high risk, 18.6% early onset, 66.8% late onset) and personalized risk (7.7% persistently high risk, 8.9% early onset, 83.4% late onset). Insights from this proof-of-concept analysis may guide design of dynamic and personalized monitoring systems that predict CRI, taking into account the triage and real-time monitoring utility of vital signs. These monitoring systems may prove useful in the dynamic allocation of technological and clinical personnel resources in acute care hospitals.

Stochastic derivative-free optimization using a trust region framework

DOE PAGES

Larson, Jeffrey; Billups, Stephen C.

2016-02-17

This study presents a trust region algorithm to minimize a function f when one has access only to noise-corrupted function values f¯. The model-based algorithm dynamically adjusts its step length, taking larger steps when the model and function agree and smaller steps when the model is less accurate. The method does not require the user to specify a fixed pattern of points used to build local models and does not repeatedly sample points. If f is sufficiently smooth and the noise is independent and identically distributed with mean zero and finite variance, we prove that our algorithm produces iterates suchmore » that the corresponding function gradients converge in probability to zero. As a result, we present a prototype of our algorithm that, while simplistic in its management of previously evaluated points, solves benchmark problems in fewer function evaluations than do existing stochastic approximation methods.« less

[The informative value of the functional step test for the purpose of computed optical topography in the children presenting with the functional disorders of the musculoskeletal system].

PubMed

Trukhmanov, I M; Suslova, G A; Ponomarenko, G N

This paper is devoted to the characteristic of the informative value of the functional step test with the application of the heel cushions in the children for the purpose of differential diagnostics of anatomic and functional differences in the length of the lower extremities. A total of 85 schoolchildren with different length of the lower extremities have been examined. The comparative evaluation of the results of clinical and instrumental examinations was undertaken. The data obtained with the help of the functional step test give evidence of its very high sensitivity, specificity, and clinical significant as a tool for the examination of the children with different length of the low extremities. It is concluded that the test is one of the most informative predictors of the effectiveness of rehabilitation in the children with different length of the lower extremities.

The YMCA/Steps Community Collaboratives, 2004-2008.

PubMed

Adamson, Katie; Shepard, Dennis; Easton, Alyssa; Jones, Ellen S

2009-07-01

Since the YMCA/Steps National Partnership began in 2004, the collaborative approach has built local synergy, linked content experts, and engaged national partners to concentrate on some of the most pressing health issues in the United States. Together, national and local partners used evidence-based public health programs to address risk factors such as poor nutrition, physical inactivity, and tobacco use. This article describes the YMCA/Steps National Partnership and focuses on the experiences and achievements of the YMCA/Steps Community Collaboratives, conducted with technical assistance from the National Association of Chronic Disease Directors between 2004 and 2008. We introduce some of the fundamental concepts underlying the partnership's success and share evaluation results.

Is lower peripheral information weighted differently as a function of step number during step climbing?

PubMed

Graci, Valentina; Rabuffetti, Marco; Frigo, Carlo; Ferrarin, Maurizio

2017-02-01

The importance of peripheral visual information during stair climbing and how peripheral visual information is weighted as a function of step number during step climbing is unclear. Previous authors postulated that the knowledge of predictable characteristics of the steps may decrease reliance on foveal vision and transfer the online visual guidance of stair climbing to peripheral vision. Hence the aim of this study was to investigate if and how the occlusion of the lower peripheral visual field influenced stair climbing and if peripheral visual information was weighted differently between steps. Ten young adult male participants ascended a 5-step staircase under 2 visual conditions: full vision (FV) and lower visual occlusion (LO). Kinematic data (100Hz) were collected. The effect of Vision and Step condition on vertical forefoot clearance was examined with a Repeated Measures 2-way ANOVA. Tukey's HSD test was used for post-hoc comparisons. A significant interaction Vision x Step and main effect of Step were found (p<=0.04): vertical forefoot clearance was greater in LO compared to FV condition only on the 1st and the 2nd steps (p<0.013) and on the last step compared to the other steps (p<0.01). These findings suggest that online peripheral visual information is more relevant when negotiating the first two steps, rather than the end of a staircase and that the steps subsequent the first few ones may require different information likely based on proprioception or working memory of the step height. Copyright © 2016 Elsevier B.V. All rights reserved.

Density functional study of intramolecular ferromagnetic interaction through m-phenylene coupling unit (I): UBLYP, UB3LYP, and UHF calculations

NASA Astrophysics Data System (ADS)

Mitani, Masaki; Mori, Hiroki; Takano, Yu; Yamaki, Daisuke; Yoshioka, Yasunori; Yamaguchi, Kizashi

2000-09-01

Polyradicals comprised of m-phenylene-bridged organic radicals are well known as building blocks of organic ferromagnets, in which radical groups are connected with each other at the meta position in the benzene ring, and the parallel-spin configurations between radical sites are more stabilized than the antiparallel ones. Topological rules for spin alignments enable us to design organic high-spin dendrimers and polymers with the ferromagnetic ground states by linking various radical species through an m-phenylene unit. However, no systematic ab initio treatment of such spin dendrimers and magnetic polymers has been reported until now, though experimental studies on these materials have been performed extensively in the past ten years. As a first step to examine the possibilities of ferromagnetic dendrimers and polymers constructed of m-phenylene units with organic radicals, we report density functional and molecular orbital calculations of six m-phenylene biradical units with radical substituents and polycarbenes linked with an m-phenylene-type network. The relative stability between the spin states and spin density population are estimated by BLYP or B3LYP and Hartree-Fock calculations in order to clarify their utility for constructions of large spin denderimers and periodic magnetic polymers, which are final targets in this series of papers. It is shown that neutral polyradicals with an m-phenylene bridge are predicted as high-spin ground-state molecules by the computations, while m-phenylene-bridged ion-radical species formed by doping may have the low-spin ground states if zwitterionic configurations play significant roles to stabilize low-spin states. Ab initio computations also show an important role of conformations of polyradicals for stabilization of their high-spin states. The computational results are applied to molecular design of high-spin dendrimers and polymers. Implications of them are also discussed in relation to recent experimental results for high-spin organic molecules.

Computer aided planning of orthopaedic surgeries: the definition of generic planning steps for bone removal procedures.

PubMed

Putzer, David; Moctezuma, Jose Luis; Nogler, Michael

2017-11-01

An increasing number of orthopaedic surgeons are using computer aided planning tools for bone removal applications. The aim of the study was to consolidate a set of generic functions to be used for a 3D computer assisted planning or simulation. A limited subset of 30 surgical procedures was analyzed and verified in 243 surgical procedures of a surgical atlas. Fourteen generic functions to be used in 3D computer assisted planning and simulations were extracted. Our results showed that the average procedure comprises 14 ± 10 (SD) steps with ten different generic planning steps and four generic bone removal steps. In conclusion, the study shows that with a limited number of 14 planning functions it is possible to perform 243 surgical procedures out of Campbell's Operative Orthopedics atlas. The results may be used as a basis for versatile generic intraoperative planning software.

The zygomatic implant perforated (ZIP) flap: a new technique for combined surgical reconstruction and rapid fixed dental rehabilitation following low-level maxillectomy.

PubMed

Butterworth, C J; Rogers, S N

2017-12-01

This aim of this report is to describe the development and evolution of a new surgical technique for the immediate surgical reconstruction and rapid post-operative prosthodontic rehabilitation with a fixed dental prosthesis following low-level maxillectomy for malignant disease.The technique involves the use of a zygomatic oncology implant perforated micro-vascular soft tissue flap (ZIP flap) for the primary management of maxillary malignancy with surgical closure of the resultant maxillary defect and the installation of osseointegrated support for a zygomatic implant-supported maxillary fixed dental prosthesis.The use of this technique facilitates extremely rapid oral and dental rehabilitation within a few weeks of resective surgery, providing rapid return to function and restoring appearance following low-level maxillary resection, even in cases where radiotherapy is required as an adjuvant treatment post-operatively. The ZIP flap technique has been adopted as a standard procedure in the unit for the management of low-level maxillary malignancy, and this report provides a detailed step-by-step approach to treatment and discusses modifications developed over the treatment of an initial cohort of patients.

Optimization in the design of a 12 gigahertz low cost ground receiving system for broadcast satellites. Volume 2: Antenna system and interference

NASA Technical Reports Server (NTRS)

Ohkubo, K.; Han, C. C.; Albernaz, J.; Janky, J. M.; Lusignan, B. B.

1972-01-01

The antenna characteristics are analyzed of a low cost mass-producible ground station to be used in broadcast satellite systems. It is found that a prime focus antenna is sufficient for a low-cost but not a low noise system. For the antenna feed waveguide systems are the best choice for the 12 GHz band, while printed-element systems are recommended for the 2.6 GHz band. Zoned reflectors are analyzed and appear to be attractive from the standpoint of cost. However, these reflectors suffer a gain reduction of about one db and a possible increase in sidelobe levels. The off-axis gain of a non-auto-tracking station can be optimized by establishing a special illumination function at the reflector aperture. A step-feed tracking system is proposed to provide automatic procedures for searching for peak signal from a geostationary satellite. This system uses integrated circuitry and therefore results in cost saving under mass production. It is estimated that a complete step-track system would cost only $512 for a production quantity of 1000 units per year.

High energy X-ray diffraction study of a dental ceramics–titanium functional gradient material prepared by field assisted sintering technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witte, K., E-mail: kerstin.witte@uni-rostock.de; Bodnar, W.; Schell, N.

A functional gradient material with eleven layers composed of a dental ceramics and titanium was successfully consolidated using field assisted sintering technique in a two-step sintering process. High energy X-ray diffraction studies on the gradient were performed at High Energy Material Science beamline at Desy in Hamburg. Phase composition, crystal unit edges and lattice mismatch along the gradient were determined applying Rietveld refinement procedure. Phase analysis revealed that the main crystalline phase present in the gradient is α-Ti. Crystallinity increases stepwisely along the gradient with a decreasing increment between every next layer, following rather the weight fraction of titanium. Themore » crystal unit edge a of titanium remains approximately constant with a value of 2.9686(1) Å, while c is reduced with increasing amount of titanium. In the layer with pure titanium the crystal unit edge c is constant with a value of 4.7174(2) Å. The lattice mismatch leading to an internal stress was calculated over the whole gradient. It was found that the maximal internal stress in titanium embedded in the studied gradient is significantly smaller than its yield strength, which implies that the structure of titanium along the whole gradient is mechanically stable. - Highlights: • High energy XRD studies of dental ceramics–Ti gradient material consolidated by FAST. • Phase composition, crystallinity and lattice parameters are determined. • Crystallinity increases stepwisely along the gradient following weight fraction of Ti. • Lattice mismatch leading to internal stress is calculated over the whole gradient. • Internal stress in α-Ti embedded in the gradient is smaller than its yield strength.« less

Who has the D? How clear decision roles enhance organizational performance.

PubMed

Rogers, Paul; Blenko, Marcia

2006-01-01

Decisions are the coin of the realm in business. But even in highly respected companies, decisions can get stuck inside the organization like loose change. As a result, the entire decision-making process can stall, usually at one of four bottlenecks: global versus local, center versus business unit, function versus function, and inside versus outside partners. Decision-making bottlenecks can occur whenever there is ambiguity or tension over who gets to decide what. For example, do marketers or product developers get to decide the features of a new product? Should a major capital investment depend on the approval of the business unit that will own it, or should headquarters make the final call? Which decisions can be delegated to an outsourcing partner, and which must be made internally? Bain consultants Paul Rogers and Marcia Blenko use an approach called RAPID (recommend, agree, perform, input, and decide) to help companies unclog their decision-making bottlenecks by explicitly defining roles and responsibilities. For example, British American Tobacco struck a new balance between global and local decision making to take advantage of the company's scale while maintaining its agility in local markets. At Wyeth Pharmaceuticals, a growth opportunity revealed the need to push more decisions down to the business units. And at the UK department-store chain John Lewis, buyers and sales staff clarified their decision roles in order to implement a new strategy for selling its salt and pepper mills. When revamping its decision-making process, a company must take some practical steps: Align decision roles with the most important sources of value, make sure that decisions are made by the right people at the right levels of the organization, and let the people who will live with the new process help design it.

Theoretical analysis of factors controlling the nonalternating CO/C(2)H(4) copolymerization.

PubMed

Haras, Alicja; Michalak, Artur; Rieger, Bernhard; Ziegler, Tom

2005-06-22

A [P-O]Pd catalyst based on o-alkoxy derivatives of diphenylphosphinobenzene sulfonic acid (I) has recently been shown by Drent et al. to perform nonalternating CO/C(2)H(4) copolymerization with subsequent incorporation of ethylene units into the polyketone chain. The origin of the nonalternation is investigated in a theoretical study of I, where calculated activation barriers and reaction heats of all involved elementary steps are used to generate a complete kinetic model. The kinetic model is able to account for the observed productivity and degree of nonalternation as a function of temperature. Consistent with the energy changes obtained for the real catalyst model, the selectivity toward a nonalternating distribution of both comonomers appears to be mainly a result of a strong destabilization of the Pd-acyl complex.

The economic case for digital interventions for eating disorders among United States college students.

PubMed

Kass, Andrea E; Balantekin, Katherine N; Fitzsimmons-Craft, Ellen E; Jacobi, Corinna; Wilfley, Denise E; Taylor, C Barr

2017-03-01

Eating disorders (EDs) are serious health problems affecting college students. This article aimed to estimate the costs, in United States (US) dollars, of a stepped care model for online prevention and treatment among US college students to inform meaningful decisions regarding resource allocation and adoption of efficient care delivery models for EDs on college campuses. Using a payer perspective, we estimated the costs of (1) delivering an online guided self-help (GSH) intervention to individuals with EDs, including the costs of "stepping up" the proportion expected to "fail"; (2) delivering an online preventive intervention compared to a "wait and treat" approach to individuals at ED risk; and (3) applying the stepped care model across a population of 1,000 students, compared to standard care. Combining results for online GSH and preventive interventions, we estimated a stepped care model would cost less and result in fewer individuals needing in-person psychotherapy (after receiving less-intensive intervention) compared to standard care, assuming everyone in need received intervention. A stepped care model was estimated to achieve modest cost savings compared to standard care, but these estimates need to be tested with sensitivity analyses. Model assumptions highlight the complexities of cost calculations to inform resource allocation, and considerations for a disseminable delivery model are presented. Efforts are needed to systematically measure the costs and benefits of a stepped care model for EDs on college campuses, improve the precision and efficacy of ED interventions, and apply these calculations to non-US care systems with different cost structures. © 2017 Wiley Periodicals, Inc.

Bedload transport rates in a step-pool channel at near-bankfull flows

Treesearch

Daniel A. Marion

2001-01-01

This paper examines unit bedload transport rates (BTRs) at near-bankfull flows within a small step-pool channel in the Ouachita Mountains of central Arkansas. For this study, five runoff events with peak discharges between 0.25 and 1.34 cms (1.0- to 1.6-yr recurrence intervals) were produced in a natural channel using a streamflow simulation system. BTRs range from...

Inter-Rater Reliability and Generalizability of Patient Note Scores Using a Scoring Rubric Based on the USMLE Step-2 CS Format

ERIC Educational Resources Information Center

Park, Yoon Soo; Hyderi, Abbas; Bordage, Georges; Xing, Kuan; Yudkowsky, Rachel

2016-01-01

Recent changes to the patient note (PN) format of the United States Medical Licensing Examination have challenged medical schools to improve the instruction and assessment of students taking the Step-2 clinical skills examination. The purpose of this study was to gather validity evidence regarding response process and internal structure, focusing…

A guide to the TWIGS program for the North Central United States.

Treesearch

Cynthia L. Miner; Nancy R. Walters; Monique L. Belli

1988-01-01

This is a complete reference to TWIGS, a forest growth-and-yield program with management and economic components developed for Lake and Central States tree species. The guide describes how TWIGS models growth and yield and how the model can be applied to obtain the best results. Step-by-step operating instructions are provided for TWIGS and its companion program,...

47 CFR 74.796 - Modification of digital transmission systems and analog transmission systems for digital operation.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Subtract the value determined in the previous step from the authorized effective radiated power (“ERP”) of... ERP must be expressed in decibels above one kilowatt: ERP(dBk) = 10 log ERP(kW); (4) Convert the ERP calculated in the previous step to units of kilowatts; and (5) The ERP value determined through the above...

Academic and Professional Career Outcomes of Medical School Graduates Who Failed USMLE Step 1 on the First Attempt

ERIC Educational Resources Information Center

McDougle, Leon; Mavis, Brian E.; Jeffe, Donna B.; Roberts, Nicole K.; Ephgrave, Kimberly; Hageman, Heather L.; Lypson, Monica L.; Thomas, Lauree; Andriole, Dorothy A.

2013-01-01

This study sought to determine the academic and professional outcomes of medical school graduates who failed the United States Licensing Examination Step 1 on the first attempt. This retrospective cohort study was based on pooled data from 2,003 graduates of six Midwestern medical schools in the classes of 1997-2002. Demographic, academic, and…

Striatal-enriched Protein-tyrosine Phosphatase (STEP) Regulates Pyk2 Kinase Activity*

PubMed Central

Xu, Jian; Kurup, Pradeep; Bartos, Jason A.; Patriarchi, Tommaso; Hell, Johannes W.; Lombroso, Paul J.

2012-01-01

Proline-rich tyrosine kinase 2 (Pyk2) is a member of the focal adhesion kinase family and is highly expressed in brain and hematopoietic cells. Pyk2 plays diverse functions in cells, including the regulation of cell adhesion, migration, and cytoskeletal reorganization. In the brain, it is involved in the induction of long term potentiation through regulation of N-methyl-d-aspartate receptor trafficking. This occurs through the phosphorylation and activation of Src family tyrosine kinase members, such as Fyn, that phosphorylate GluN2B at Tyr1472. Phosphorylation at this site leads to exocytosis of GluN1-GluN2B receptors to synaptic membranes. Pyk2 activity is modulated by phosphorylation at several critical tyrosine sites, including Tyr402. In this study, we report that Pyk2 is a substrate of striatal-enriched protein-tyrosine phosphatase (STEP). STEP binds to and dephosphorylates Pyk2 at Tyr402. STEP KO mice showed enhanced phosphorylation of Pyk2 at Tyr402 and of the Pyk2 substrates paxillin and ASAP1. Functional studies indicated that STEP opposes Pyk2 activation after KCl depolarization of cortical slices and blocks Pyk2 translocation to postsynaptic densities, a key step required for Pyk2 activation and function. This is the first study to identify Pyk2 as a substrate for STEP. PMID:22544749

On the detection of functionally coherent groups of protein domains with an extension to protein annotation

PubMed Central

McLaughlin, William A; Chen, Ken; Hou, Tingjun; Wang, Wei

2007-01-01

Background Protein domains coordinate to perform multifaceted cellular functions, and domain combinations serve as the functional building blocks of the cell. The available methods to identify functional domain combinations are limited in their scope, e.g. to the identification of combinations falling within individual proteins or within specific regions in a translated genome. Further effort is needed to identify groups of domains that span across two or more proteins and are linked by a cooperative function. Such functional domain combinations can be useful for protein annotation. Results Using a new computational method, we have identified 114 groups of domains, referred to as domain assembly units (DASSEM units), in the proteome of budding yeast Saccharomyces cerevisiae. The units participate in many important cellular processes such as transcription regulation, translation initiation, and mRNA splicing. Within the units the domains were found to function in a cooperative manner; and each domain contributed to a different aspect of the unit's overall function. The member domains of DASSEM units were found to be significantly enriched among proteins contained in transcription modules, defined as genes sharing similar expression profiles and presumably similar functions. The observation further confirmed the functional coherence of DASSEM units. The functional linkages of units were found in both functionally characterized and uncharacterized proteins, which enabled the assessment of protein function based on domain composition. Conclusion A new computational method was developed to identify groups of domains that are linked by a common function in the proteome of Saccharomyces cerevisiae. These groups can either lie within individual proteins or span across different proteins. We propose that the functional linkages among the domains within the DASSEM units can be used as a non-homology based tool to annotate uncharacterized proteins. PMID:17937820

An Introduction to Retail Electricity Choice in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Shengru

Retail electricity choice in the United States allows end-use customers (including industrial, commercial, and residential customers) to buy electricity from competitive retail suppliers. This brochure offers an overview of retail electricity choice in the United States, and its impact on prices and renewable energy procurement. It concludes with three lessons learned from the U.S. retail market experience that may serve as a reference for other countries and regions taking steps towards retail electricity market liberalization.

Changes in the Former Soviet Union: Debating U.S. Aid. Choices for the 21st Century. Alternatives for Public Debate and Policy Development.

ERIC Educational Resources Information Center

Brown Univ., Providence, RI. Center for Foreign Policy Development.

This unit of study allows students and teachers to step back from the confusing media reports of the day-to-day turmoil in the former Soviet Union (FSU) and to examine it from a more thoughtful vantage point. The unit focuses on the most important instrument of U.S. policy toward the FSU--economic assistance. At the core of the unit are four…

To designate the United States Federal Judicial Center located at 333 West Broadway Street in San Diego, California, as the "John Rhoades Federal Judicial Center'' and to designate the United States courthouse located at 333 West Broadway Street in San Diego, California, as the ''James M. Carter and Judith N. Keep United States Courthouse".

THOMAS, 113th Congress

Rep. Issa, Darrell E. [R-CA-49

2013-06-05

House - 06/06/2013 Referred to the Subcommittee on Economic Development, Public Buildings and Emergency Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

To amend title 49, United States Code, to direct the Assistant Secretary of Homeland Security (Transportation Security Administration) to transfer unclaimed money recovered at airport security checkpoints to United Service Organizations, Incorporated, and for other purposes.

THOMAS, 111th Congress

Rep. Miller, Jeff [R-FL-1

2009-04-30

House - 05/26/2009 Referred to the Subcommittee on Transportation Security and Infrastructure Protection. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Proposing an amendment to the Constitution of the United States relative to abolishing personal income, estate, and gift taxes and prohibiting the United States Government from engaging in business in competition with its citizens.

THOMAS, 111th Congress

Rep. Paul, Ron [R-TX-14

2009-04-30

House - 06/12/2009 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Proposing an amendment to the Constitution of the United States to give citizens of the United States the right to enact and repeal laws by voting on legislation in a national election.

THOMAS, 111th Congress

Rep. Hoekstra, Peter [R-MI-2

2010-01-21

House - 03/01/2010 Referred to the Subcommittee on the Constitution, Civil Rights, and Civil Liberties. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A resolution congratulating the athletes from the United States who participated in the 2014 Olympic Winter Games as members of the United States Olympic Team.

THOMAS, 113th Congress

Sen. Thune, John [R-SD

2014-03-11

Senate - 03/11/2014 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

To designate the United States courthouse located at 100 North Church Street in Las Cruces, New Mexico, as the "Edwin L. Mechem United States Courthouse".

THOMAS, 112th Congress

Rep. Pearce, Stevan [R-NM-2

2011-12-20

Senate - 07/24/2012 Received in the Senate and Read twice and referred to the Committee on Environment and Public Works. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

To designate the United States courthouse under construction at 98 West First Street, Yuma, Arizona, as the "John M. Roll United States Courthouse".

THOMAS, 112th Congress

Rep. Grijalva, Raul M. [D-AZ-7

2011-02-09

02/10/2011 For Further Action See S.188. (All Actions) Notes: For further action, see S.188, which became Public Law 112-2 on 2/17/2011. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

First Steps in Ecology: A Guide for the Elementary Grades.

ERIC Educational Resources Information Center

Bense, Beverly; And Others

Each of the 18 units in this collection addresses a different environmental problem. An introduction precedes the collection of activities and appendices provide lists of forest animals and plants and lists of food webs. A glossary is provided as is a bibliography. Each unit includes: (1) a list of objectives; (2) a summary; (3) a discussion of…

To provide discretionary authority to an immigration judge to determine that an alien parent of a United States citizen child should not be ordered removed, deported, or excluded from the United States.

THOMAS, 111th Congress

Rep. Serrano, Jose E. [D-NY-16

2009-01-06

House - 02/09/2009 Referred to the Subcommittee on Immigration, Citizenship, Refugees, Border Security, and International Law. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A resolution honoring Admiral Thad Allen of the United States Coast Guard (Ret.) for his lifetime of selfless commitment and exemplary service to the United States.

THOMAS, 112th Congress

Sen. Cochran, Thad [R-MS

2011-05-05

Senate - 06/30/2011 Resolution agreed to in Senate without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

Technology assessment of automation trends in the modular home industry

Treesearch

Phil Mitchell; Robert Russell Hurst

2009-01-01

This report provides an assessment of technology used in manufacturing modular homes in the United States, and that used in the German prefabricated wooden home industry. It is the first step toward identifying the research needs in automation and manufacturing methods that will facilitate mass customization in the home manufacturing industry. Within the United States...

To amend title 23, United States Code, with respect to United States Route 78 in Mississippi, and for other purposes.

THOMAS, 113th Congress

Rep. Nunnelee, Alan [R-MS-1

2013-07-09

House - 07/10/2013 Referred to the Subcommittee on Highways and Transit. (All Actions) Notes: For further action, see H.R.83, which became Public Law 113-235 on 12/16/2014. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A WebQuest for Spatial Skills

ERIC Educational Resources Information Center

Wood, Pamela L.; Quitadamo, Ian J.; DePaepe, James L.; Loverro, Ian

2007-01-01

The WebQuest is a four-step process integrated at appropriate points in the Animal Studies unit. Through the WebQuest, students create a series of habitat maps that build on the knowledge gained from conducting the various activities of the unit. The quest concludes with an evaluation using the WebQuest rubric and an oral presentation of a final…

To designate the Federal building and United States courthouse located at 101 Barr Street in Lexington, Kentucky, as the "Scott Reed Federal Building and United States Courthouse".

THOMAS, 111th Congress

Rep. Chandler, Ben [D-KY-6

2009-02-04

Senate - 03/11/2009 Received in the Senate and Read twice and referred to the Committee on Environment and Public Works. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

A resolution recognizing Hispanic Heritage Month and celebrating the heritage and culture of Latinos in the United States and the immense contributions of Latinos to the United States.

THOMAS, 113th Congress

Sen. Menendez, Robert [D-NJ

2014-09-15

Senate - 09/17/2014 Resolution agreed to in Senate without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

Kiel sensors for the EPD instrument on-board Solar Orbiter - An overview of the qualification and acceptance test campaigns in phase D

NASA Astrophysics Data System (ADS)

Ravanbakhsh, A.; Kulkarni, S. R.; Panitzsch, L.; L Richards, M.; Munoz Hernandez, A.; Seimetz, L.; Elftmann, R.; Mahesh, Y.; Boden, S.; Boettcher, S. I.; Kulemzin, A.; Martin-Garcia, C.; Prieto, M.; Rodriguez-Pacheco, J.; Sanchez Prieto, S.; Schuster, B.; Steinhagen, J.; Tammen, J.; Wimmer-Schweingruber, R. F.

2016-12-01

Solar Orbiter is ESA's next solar and heliospheric mission which is planned to be launched in October 2018. The Energetic Particle Detector (EPD) on board on Solar Orbiter will provide key measurements for the Solar Orbiter science objectives. The EPD suite consists of four sensors; STEP, SIS, EPT and HET. The University of Kiel in Germany is responsible for the design, development, and building of STEP, and the two identical units EPT-HET 1 and EPT-HET 2. ESA's Solar Orbiter will explore the heliosphere at heliocentric distances between 0.28AU and 0.9AU and with inclination up to 38deg with respect to the Sun's equator. The spacecraft uses a heat shield to protect the bus and externally mounted instruments from the solar flux at the close distances to the sun. All three EPD-Kiel units are mounted externally but in different positions on the spacecraft outer deck. Although being protected by the spacecraft heat shield from high solar flux, EPT-HET1 and EPT-HET-2 as well as STEP experience a harsh environmental condition during the course of the mission. In addition due to the highly demanding science requirements, the qualification and acceptance test requirements of these externally mounted units are quite challenging. In this paper we present the development status of the EPT-HET 1, EPT-HET 2 and STEP sensors focusing on the activities performed in phase D and the qualification and acceptance test campaigns. The main objective of these test campaigns is to ensure and demonstrate the compatibility between the scientific requirements and the harsh environment expected during the mission. This paper includes the results summary of the environmental tests on the EPT-HET and STEP Proto-Qualification Models (PQMs) as well as Proto-Flight Models (PFMs). Only an adequate selection of environmental qualification and acceptance campaigns will guarantee the success of the scientific space missions.

Combining living anionic polymerization with branching reactions in an iterative fashion to design branched polymers.

PubMed

Higashihara, Tomoya; Sugiyama, Kenji; Yoo, Hee-Soo; Hayashi, Mayumi; Hirao, Akira

2010-06-16

This paper reviews the precise synthesis of many-armed and multi-compositional star-branched polymers, exact graft (co)polymers, and structurally well-defined dendrimer-like star-branched polymers, which are synthetically difficult, by a commonly-featured iterative methodology combining living anionic polymerization with branched reactions to design branched polymers. The methodology basically involves only two synthetic steps; (a) preparation of a polymeric building block corresponding to each branched polymer and (b) connection of the resulting building unit to another unit. The synthetic steps were repeated in a stepwise fashion several times to successively synthesize a series of well-defined target branched polymers. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Simplified Two-Time Step Method for Calculating Combustion and Emission Rates of Jet-A and Methane Fuel With and Without Water Injection

NASA Technical Reports Server (NTRS)

Molnar, Melissa; Marek, C. John

2005-01-01

A simplified kinetic scheme for Jet-A, and methane fuels with water injection was developed to be used in numerical combustion codes, such as the National Combustor Code (NCC) or even simple FORTRAN codes. The two time step method is either an initial time averaged value (step one) or an instantaneous value (step two). The switch is based on the water concentration in moles/cc of 1x10(exp -20). The results presented here results in a correlation that gives the chemical kinetic time as two separate functions. This two time step method is used as opposed to a one step time averaged method previously developed to determine the chemical kinetic time with increased accuracy. The first time averaged step is used at the initial times for smaller water concentrations. This gives the average chemical kinetic time as a function of initial overall fuel air ratio, initial water to fuel mass ratio, temperature, and pressure. The second instantaneous step, to be used with higher water concentrations, gives the chemical kinetic time as a function of instantaneous fuel and water mole concentration, pressure and temperature (T4). The simple correlations would then be compared to the turbulent mixing times to determine the limiting rates of the reaction. The NASA Glenn GLSENS kinetics code calculates the reaction rates and rate constants for each species in a kinetic scheme for finite kinetic rates. These reaction rates are used to calculate the necessary chemical kinetic times. Chemical kinetic time equations for fuel, carbon monoxide and NOx are obtained for Jet-A fuel and methane with and without water injection to water mass loadings of 2/1 water to fuel. A similar correlation was also developed using data from NASA's Chemical Equilibrium Applications (CEA) code to determine the equilibrium concentrations of carbon monoxide and nitrogen oxide as functions of overall equivalence ratio, water to fuel mass ratio, pressure and temperature (T3). The temperature of the gas entering the turbine (T4) was also correlated as a function of the initial combustor temperature (T3), equivalence ratio, water to fuel mass ratio, and pressure.

Progress Implementing a Model-Based Iterative Reconstruction Algorithm for Ultrasound Imaging of Thick Concrete

DOE Office of Scientific and Technical Information (OSTI.GOV)

Almansouri, Hani; Johnson, Christi R; Clayton, Dwight A

All commercial nuclear power plants (NPPs) in the United States contain concrete structures. These structures provide important foundation, support, shielding, and containment functions. Identification and management of aging and the degradation of concrete structures is fundamental to the proposed long-term operation of NPPs. Concrete structures in NPPs are often inaccessible and contain large volumes of massively thick concrete. While acoustic imaging using the synthetic aperture focusing technique (SAFT) works adequately well for thin specimens of concrete such as concrete transportation structures, enhancements are needed for heavily reinforced, thick concrete. We argue that image reconstruction quality for acoustic imaging in thickmore » concrete could be improved with Model-Based Iterative Reconstruction (MBIR) techniques. MBIR works by designing a probabilistic model for the measurements (forward model) and a probabilistic model for the object (prior model). Both models are used to formulate an objective function (cost function). The final step in MBIR is to optimize the cost function. Previously, we have demonstrated a first implementation of MBIR for an ultrasonic transducer array system. The original forward model has been upgraded to account for direct arrival signal. Updates to the forward model will be documented and the new algorithm will be assessed with synthetic and empirical samples.« less

Progress implementing a model-based iterative reconstruction algorithm for ultrasound imaging of thick concrete

NASA Astrophysics Data System (ADS)

Almansouri, Hani; Johnson, Christi; Clayton, Dwight; Polsky, Yarom; Bouman, Charles; Santos-Villalobos, Hector

2017-02-01

All commercial nuclear power plants (NPPs) in the United States contain concrete structures. These structures provide important foundation, support, shielding, and containment functions. Identification and management of aging and the degradation of concrete structures is fundamental to the proposed long-term operation of NPPs. Concrete structures in NPPs are often inaccessible and contain large volumes of massively thick concrete. While acoustic imaging using the synthetic aperture focusing technique (SAFT) works adequately well for thin specimens of concrete such as concrete transportation structures, enhancements are needed for heavily reinforced, thick concrete. We argue that image reconstruction quality for acoustic imaging in thick concrete could be improved with Model-Based Iterative Reconstruction (MBIR) techniques. MBIR works by designing a probabilistic model for the measurements (forward model) and a probabilistic model for the object (prior model). Both models are used to formulate an objective function (cost function). The final step in MBIR is to optimize the cost function. Previously, we have demonstrated a first implementation of MBIR for an ultrasonic transducer array system. The original forward model has been upgraded to account for direct arrival signal. Updates to the forward model will be documented and the new algorithm will be assessed with synthetic and empirical samples.

Test Program of the "Combined Data and Power Management Infrastructure"

NASA Astrophysics Data System (ADS)

Eickhoff, Jens; Fritz, Michael; Witt, Rouven; Bucher, Nico; Roser, Hans-Peter

2013-08-01

As already published in previous DASIA papers, the University of Stuttgart, Germany, is developing an advanced 3-axis stabilized small satellite applying industry standards for command/control techniques and Onboard Software design. This satellite furthermore features an innovative hybrid architecture of Onboard Computer and Power Control and Distribution Unit. One of the main challenges was the development of an ultra-compact and performing Onboard Computer (OBC), which was intended to support an RTEMS operating system, a PUS standard based Onboard Software (OBSW) and CCSDS standard based ground/space communication. The developed architecture (see [1, 2, 3]) is called a “Combined Onboard Data and Power Management Infrastructure” - CDPI. It features: The OBC processor boards based on a LEON3FT architecture - from Aeroflex Inc., USA The I/O Boards for all OBC digital interfaces to S/C equipment (digital RIU) - from 4Links Ltd. UK CCSDS TC/TM decoder/encoder boards - with same HW design as I/O boards - just with limited number of interfaces. HW from 4Links Ltd, UK, driver SW and IP-Core from Aeroflex Gaisler, SE Analog RIU functions via enhanced PCDU from Vectronic Aerospace, D OBC reconfiguration unit functions via Common Controller - here in PCDU [4] The CDPI overall assembly is meanwhile complete and a exhaustive description can be found in [5]. The EM test campaign including the HW/SW compatibility testing is finalized. This comprises all OBC EM units, OBC EM assembly and the EM PCDU. The unit test program for the FM Processor-Boards and Power-Boards of the OBC are completed and the unit tests of FM I/O-Boards and CCSDS-Boards have been completed by 4Links at the assembly house. The subsystem tests of the assembled OBC also are completed and the overall System tests of the CDPI with system reconfiguration in diverse possible FDIR cases also reach the last steps. Still ongoing is the subsequent integration of the CDPI with the satellite's avionics components encompassing TTC, AOCS, Power and Payload Control. This paper provides a full picture of the test campaign. Further details can be taken from

Functional polyester materials with tunable degradability: Investigations into the use of reductive amination, ketoxime ether, and hydrazone linkages for functionalization, covalent stabilization and crosslinking of poly(epsilon-caprolactone) materials

NASA Astrophysics Data System (ADS)

van Horn, Brooke Angela

Aliphatic polyesters represent one class of degradable, polymeric materials that is receiving significant attention in the search for, and design of, biocompatible and bioresorbable synthetic substances. Functional and crosslinked polyesters, having potential biomedical value, are the target of many avenues of current research. This dissertation work expands the utility of a specific aliphatic polyester, poly(epsilon-caprolactone-co-2-oxepane-1,5-dione) (P(CL-co-OPD)), which contains backbone ketone units that can be reacted with various functional, nucleophilic agents. Results presented in this dissertation convey both the successes had and the challenges encountered in the employment of different "iminyl" chemistries for the synthesis of functional and crosslinked materials. Specifically, the ketone-functionalized polyester was investigated as a general substrate designed to undergo solution-state intramolecular crosslinking and functionalization upon reductive amination with 1,6-hexanediamine and hexylamine, respectively, in the presence of NaCNBH3. Through detailed analysis of the products from these reactions, and simpler systems including small molecule model compounds, the polymeric gamma-keto ester functionality was determined to be incompatible with the reductive amination chemistry, resulting in chain cleavage via intramolecular lactam formation. Subsequent investigation of ketoxime ether formation using synthetic model hydroxylamines, 1-aminooxydodecane and 1,6-bis(aminooxy)hexane, in solution and in the presence of an acid catalyst, resulted in the targeted graft and crosslinked particulate/gel materials, respectively. With the significant interest in the development of synthetic polymer materials of increasing degrees of complexity, attention has been focused on the efficient and high-yielding conversion of polyesters into multi-functional materials. Facile conjugation of aminooxy- and sulfonyl hydrazide model ligands with P(CL-co-OPD) were also explored by both sequential and single-step approaches. The benefits of the characterization of intermediates in a functionalization sequence were then weighed against the corresponding challenges faced by the establishment of equilibria between coupled and uncoupled species in solution. Additionally, in this dissertation, the advantages of a single-step reaction for the construction of multi-functionalization are stressed. Finally, the synthesis and basic characterization of specific functional materials are highlighted with regard to the preparation of novel ligand-bearing graft and particulate nanostructures, decorated with poly(ethylene oxide), chromophores, fluorophores, and radio-labeled molecules, for potential use in diagnostic imaging and drug delivery.

Theoretical study of water-gas shift reaction on the silver nanocluster

NASA Astrophysics Data System (ADS)

Arab, Ali; Sharafie, Darioush; Fazli, Mostafa

2017-10-01

The kinetics of water gas shift reaction (WGSR) on the silver nanocluster was investigated using density functional theory according to the carboxyl associative mechanism. The hybrid B3PW91 functional along with the 6-31+G* and LANL2DZ basis sets were used throughout the calculations. It was observed that CO and H2O molecules adsorb physically on the Ag5 cluster without energy barrier as the initial steps of WGSR. The next three steps including H2Oads dissociation, carboxyl (OCOHads) formation, and CO2(ads) formation were accompanied by activation barrier. Transition states, as well as energy profiles of these three steps, were determined and analyzed. Our results revealed that the carboxyl and CO2(ads) formation were fast steps whereas H2Oads dissociation was the slowest step of WGSR.

On the way to a microscopic derivation of covariant density functionals in nuclei

NASA Astrophysics Data System (ADS)

Ring, Peter

2018-02-01

Several methods are discussed to derive covariant density functionals from the microscopic input of bare nuclear forces. In a first step there are semi-microscopic functionals, which are fitted to ab-initio calculations of nuclear matter and depend in addition on very few phenomenological parameters. They are able to describe nuclear properties with the same precision as fully phenomenological functionals. In a second step we present first relativistic Brueckner-Hartree-Fock calculations in finite nuclei in order to study properties of such functionals, which cannot be obtained from nuclear matter calculations.

Practical training framework for fitting a function and its derivatives.

PubMed

Pukrittayakamee, Arjpolson; Hagan, Martin; Raff, Lionel; Bukkapatnam, Satish T S; Komanduri, Ranga

2011-06-01

This paper describes a practical framework for using multilayer feedforward neural networks to simultaneously fit both a function and its first derivatives. This framework involves two steps. The first step is to train the network to optimize a performance index, which includes both the error in fitting the function and the error in fitting the derivatives. The second step is to prune the network by removing neurons that cause overfitting and then to retrain it. This paper describes two novel types of overfitting that are only observed when simultaneously fitting both a function and its first derivatives. A new pruning algorithm is proposed to eliminate these types of overfitting. Experimental results show that the pruning algorithm successfully eliminates the overfitting and produces the smoothest responses and the best generalization among all the training algorithms that we have tested.

Graphical analysis for gel morphology II. New mathematical approach for stretched exponential function with β>1

NASA Astrophysics Data System (ADS)

Hashimoto, Chihiro; Panizza, Pascal; Rouch, Jacques; Ushiki, Hideharu

2005-10-01

A new analytical concept is applied to the kinetics of the shrinking process of poly(N-isopropylacrylamide) (PNIPA) gels. When PNIPA gels are put into hot water above the critical temperature, two-step shrinking is observed and the secondary shrinking of gels is fitted well by a stretched exponential function. The exponent β characterizing the stretched exponential is always higher than one, although there are few analytical concepts for the stretched exponential function with β>1. As a new interpretation for this function, we propose a superposition of step (Heaviside) function and a new distribution function of characteristic time is deduced.

Chemoenzymatic Total Synthesis and Structural Diversification of Tylactone-Based Macrolide Antibiotics through Late-Stage Polyketide Assembly, Tailoring, and C-H Functionalization.

PubMed

Lowell, Andrew N; DeMars, Matthew D; Slocum, Samuel T; Yu, Fengan; Anand, Krithika; Chemler, Joseph A; Korakavi, Nisha; Priessnitz, Jennifer K; Park, Sung Ryeol; Koch, Aaron A; Schultz, Pamela J; Sherman, David H

2017-06-14

Polyketide synthases (PKSs) represent a powerful catalytic platform capable of effecting multiple carbon-carbon bond forming reactions and oxidation state adjustments. We explored the functionality of two terminal PKS modules that produce the 16-membered tylosin macrocycle, using them as biocatalysts in the chemoenzymatic synthesis of tylactone and its subsequent elaboration to complete the first total synthesis of the juvenimicin, M-4365, and rosamicin classes of macrolide antibiotics via late-stage diversification. Synthetic chemistry was employed to generate the tylactone hexaketide chain elongation intermediate that was accepted by the juvenimicin (Juv) ketosynthase of the penultimate JuvEIV PKS module. The hexaketide is processed through two complete modules (JuvEIV and JuvEV) in vitro, which catalyze elongation and functionalization of two ketide units followed by cyclization of the resulting octaketide into tylactone. After macrolactonization, a combination of in vivo glycosylation, selective in vitro cytochrome P450-mediated oxidation, and chemical oxidation was used to complete the scalable construction of a series of macrolide natural products in as few as 15 linear steps (21 total) with an overall yield of 4.6%.

Neurocognitive predictors of financial capacity in traumatic brain injury.

PubMed

Martin, Roy C; Triebel, Kristen; Dreer, Laura E; Novack, Thomas A; Turner, Crystal; Marson, Daniel C

2012-01-01

To develop cognitive models of financial capacity (FC) in patients with traumatic brain injury (TBI). Longitudinal design. Inpatient brain injury rehabilitation unit. Twenty healthy controls, and 24 adults with moderate-to-severe TBI were assessed at baseline (30 days postinjury) and 6 months postinjury. The FC instrument (FCI) and a neuropsychological test battery. Univariate correlation and multiple regression procedures were employed to develop cognitive models of FCI performance in the TBI group, at baseline and 6-month time follow-up. Three cognitive predictor models of FC were developed. At baseline, measures of mental arithmetic/working memory and immediate verbal memory predicted baseline FCI performance (R = 0.72). At 6-month follow-up, measures of executive function and mental arithmetic/working memory predicted 6-month FCI performance (R = 0.79), and a third model found that these 2 measures at baseline predicted 6-month FCI performance (R = 0.71). Multiple cognitive functions are associated with initial impairment and partial recovery of FC in moderate-to-severe TBI patients. In particular, arithmetic, working memory, and executive function skills appear critical to recovery of FC in TBI. The study results represent an initial step toward developing a neurocognitive model of FC in patients with TBI.

Development of a Recombinant Multifunctional Biomacromolecule for Targeted Gene Transfer to Prostate Cancer Cells.

PubMed

Hatefi, Arash; Karjoo, Zahra; Nomani, Alireza

2017-09-11

The objective of this study was to genetically engineer a fully functional single chain fusion peptide composed of motifs from diverse biological and synthetic origins that can perform multiple tasks including DNA condensation, cell targeting, cell transfection, particle shielding from immune system and effective gene transfer to prostate tumors. To achieve the objective, a single chain biomacromolecule (vector) consisted of four repeatative units of histone H2A peptide, fusogenic peptide GALA, short elastin-like peptide, and PC-3 cell targeting peptide was designed. To examine the functionality of each motif in the vector sequence, it was characterized in terms of size and zeta potential by Zetasizer, PC-3 cell targeting and transfection by flowcytometry, IgG induction by immunogenicity assay, and PC-3 tumor transfection by quantitative live animal imaging. Overall, the results of this study showed the possibility of using genetic engineering techniques to program various functionalities into one single chain vector and create a multifunctional nonimmunogenic biomacromolecule for targeted gene transfer to prostate cancer cells. This proof-of-concept study is a significant step forward toward creating a library of vectors for targeted gene transfer to any cancer cell type at both in vitro and in vivo levels.

Expression, purification and crystallization of a plant polyketide cyclase from Cannabis sativa

PubMed Central

Yang, Xinmei; Matsui, Takashi; Mori, Takahiro; Taura, Futoshi; Noguchi, Hiroshi; Abe, Ikuro; Morita, Hiroyuki

2015-01-01

Plant polyketides are a structurally diverse family of natural products. In the biosynthesis of plant polyketides, the construction of the carbocyclic scaffold is a key step in diversifying the polyketide structure. Olivetolic acid cyclase (OAC) from Cannabis sativa L. is the only known plant polyketide cyclase that catalyzes the C2–C7 intramolecular aldol cyclization of linear pentyl tetra-β-ketide-CoA to generate olivetolic acid in the biosynthesis of cannabinoids. The enzyme is also thought to belong to the dimeric α+β barrel (DABB) protein family. However, because of a lack of functional analysis of other plant DABB proteins and low sequence identity with the functionally distinct bacterial DABB proteins, the catalytic mechanism of OAC has remained unclear. To clarify the intimate catalytic mechanism of OAC, the enzyme was overexpressed in Escherichia coli and crystallized using the vapour-diffusion method. The crystals diffracted X-rays to 1.40 Å resolution and belonged to space group P3121 or P3221, with unit-cell parameters a = b = 47.3, c = 176.0 Å. Further crystallographic analysis will provide valuable insights into the structure–function relationship and catalytic mechanism of OAC. PMID:26625288

Expression, purification and crystallization of a plant polyketide cyclase from Cannabis sativa.

PubMed

Yang, Xinmei; Matsui, Takashi; Mori, Takahiro; Taura, Futoshi; Noguchi, Hiroshi; Abe, Ikuro; Morita, Hiroyuki

2015-12-01

Plant polyketides are a structurally diverse family of natural products. In the biosynthesis of plant polyketides, the construction of the carbocyclic scaffold is a key step in diversifying the polyketide structure. Olivetolic acid cyclase (OAC) from Cannabis sativa L. is the only known plant polyketide cyclase that catalyzes the C2-C7 intramolecular aldol cyclization of linear pentyl tetra-β-ketide-CoA to generate olivetolic acid in the biosynthesis of cannabinoids. The enzyme is also thought to belong to the dimeric α+β barrel (DABB) protein family. However, because of a lack of functional analysis of other plant DABB proteins and low sequence identity with the functionally distinct bacterial DABB proteins, the catalytic mechanism of OAC has remained unclear. To clarify the intimate catalytic mechanism of OAC, the enzyme was overexpressed in Escherichia coli and crystallized using the vapour-diffusion method. The crystals diffracted X-rays to 1.40 Å resolution and belonged to space group P3121 or P3221, with unit-cell parameters a = b = 47.3, c = 176.0 Å. Further crystallographic analysis will provide valuable insights into the structure-function relationship and catalytic mechanism of OAC.

The Vertebrate Brain, Evidence of Its Modular Organization and Operating System: Insights into the Brain's Basic Units of Structure, Function, and Operation and How They Influence Neuronal Signaling and Behavior.

PubMed

Baslow, Morris H

2011-01-01

The human brain is a complex organ made up of neurons and several other cell types, and whose role is processing information for use in eliciting behaviors. However, the composition of its repeating cellular units for both structure and function are unresolved. Based on recent descriptions of the brain's physiological "operating system", a function of the tri-cellular metabolism of N-acetylaspartate (NAA) and N-acetylaspartylglutamate (NAAG) for supply of energy, and on the nature of "neuronal words and languages" for intercellular communication, insights into the brain's modular structural and functional units have been gained. In this article, it is proposed that the basic structural unit in brain is defined by its physiological operating system, and that it consists of a single neuron, and one or more astrocytes, oligodendrocytes, and vascular system endothelial cells. It is also proposed that the basic functional unit in the brain is defined by how neurons communicate, and consists of two neurons and their interconnecting dendritic-synaptic-dendritic field. Since a functional unit is composed of two neurons, it requires two structural units to form a functional unit. Thus, the brain can be envisioned as being made up of the three-dimensional stacking and intertwining of myriad structural units which results not only in its gross structure, but also in producing a uniform distribution of binary functional units. Since the physiological NAA-NAAG operating system for supply of energy is repeated in every structural unit, it is positioned to control global brain function.