Completing a PhD by Publication: A Review of Australian Policy and Implications for Practice

ERIC Educational Resources Information Center

Jackson, Denise

2013-01-01

There is increasing impetus for higher-degree-by-research students to publish during candidature. Research performance, including higher degree completions and publication output, commonly determines university funding, and doctorates with publishing experience are better positioned for a career in softening academic labour markets. The PhD by…

How Artists Working in Academia View Artistic Practice as Research: Implications for Tertiary Music Education

ERIC Educational Resources Information Center

Blom, Diana; Bennett, Dawn; Wright, David

2011-01-01

Artistic research output struggles for recognition as "legitimate" research within the highly-competitive and often traditional university sector. Often recognition requires the underpinning processes and thinking to be documented in a traditional written format. This article discusses the views of eight arts practitioners working in…

From Speed Dating to Intimacy: Methodological Change in the Evaluation of a Writing Group

ERIC Educational Resources Information Center

Bosanquet, Agnes; Cahir, Jayde; Jacenyik-Trawoger, Christa; McNeill, Margot

2014-01-01

This paper explores an innovative approach to evaluating the effectiveness of a writing group in an Australian research-intensive university. Traditional qualitative and quantitative methods typically applied in higher-education research may be effective in analysing the output of writing groups; however, they do not always address the affective…

Gain control through divisive inhibition prevents abrupt transition to chaos in a neural mass model

PubMed Central

Papasavvas, Christoforos A.; Wang, Yujiang; Trevelyan, Andrew J.; Kaiser, Marcus

2016-01-01

Experimental results suggest that there are two distinct mechanisms of inhibition in cortical neuronal networks: subtractive and divisive inhibition. They modulate the input-output function of their target neurons either by increasing the input that is needed to reach maximum output or by reducing the gain and the value of maximum output itself, respectively. However, the role of these mechanisms on the dynamics of the network is poorly understood. We introduce a novel population model and numerically investigate the influence of divisive inhibition on network dynamics. Specifically, we focus on the transitions from a state of regular oscillations to a state of chaotic dynamics via period-doubling bifurcations. The model with divisive inhibition exhibits a universal transition rate to chaos (Feigenbaum behavior). In contrast, in an equivalent model without divisive inhibition, transition rates to chaos are not bounded by the universal constant (non-Feigenbaum behavior). This non-Feigenbaum behavior, when only subtractive inhibition is present, is linked to the interaction of bifurcation curves in the parameter space. Indeed, searching the parameter space showed that such interactions are impossible when divisive inhibition is included. Therefore, divisive inhibition prevents non-Feigenbaum behavior and, consequently, any abrupt transition to chaos. The results suggest that the divisive inhibition in neuronal networks could play a crucial role in keeping the states of order and chaos well separated and in preventing the onset of pathological neural dynamics. PMID:26465514

Ripples in reality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lincoln, Don; Stuver, Amber

In a deep and dark corner of space, a cataclysm loomed. Two cosmic nemeses circled one another, locked in a macabre dance of death. Unfolding over millennia, the deadly waltz began leisurely enough. But with the dance came radiation and the energy loss that it implies. Orbit after orbit, the distance between the two protagonists shrank as their grip on each other tightened. Radiation carried away energy, but not angular momentum, so the orbital velocity grew to incomprehensible levels—well into the realm where Einstein's theory of special relativity reigns supreme. With the closing distances, the inevitable occurred as the twomore » twisted knots of spacetime approached each other and merged in a spasm that shook the universe so violently that the energy output briefly outshone the electromagnetic energy output of the entire universe. The two adversaries become one, finally merged together for all eternity. The traces of their ordeal died away, leaving only a fading death scream that spread throughout the cosmos, growing ever fainter. That is, until they passed through Earth. Furthermore, that was the moment that changed everything.« less

Ripples in reality

DOE PAGES

Lincoln, Don; Stuver, Amber

2016-10-01

In a deep and dark corner of space, a cataclysm loomed. Two cosmic nemeses circled one another, locked in a macabre dance of death. Unfolding over millennia, the deadly waltz began leisurely enough. But with the dance came radiation and the energy loss that it implies. Orbit after orbit, the distance between the two protagonists shrank as their grip on each other tightened. Radiation carried away energy, but not angular momentum, so the orbital velocity grew to incomprehensible levels—well into the realm where Einstein's theory of special relativity reigns supreme. With the closing distances, the inevitable occurred as the twomore » twisted knots of spacetime approached each other and merged in a spasm that shook the universe so violently that the energy output briefly outshone the electromagnetic energy output of the entire universe. The two adversaries become one, finally merged together for all eternity. The traces of their ordeal died away, leaving only a fading death scream that spread throughout the cosmos, growing ever fainter. That is, until they passed through Earth. Furthermore, that was the moment that changed everything.« less

[Assessment of research papers in medical university staff evaluation].

PubMed

Zhou, Qing-hui

2012-06-01

Medical university staff evaluation is a substantial branch of education administration for medical university. Output number of research papers as a direct index reflecting the achievements in academic research, plays an important role in academic research evaluation. Another index, influence of the research paper, is an indirect index for academic research evaluation. This paper mainly introduced some commonly used indexes in evaluation of academic research papers currently, and analyzed the applicability and limitation of each index. The author regards that academic research evaluation in education administration, which is mainly based on evaluation of academic research papers, should combine the evaluation of journals where the papers are published with peer review of the papers, and integrate qualitative evaluation with quantitative evaluation, for the purpose of setting up an objective academic research evaluation system for medical university staff.

A scientometric analysis of Indian research output in medicine during 1999–2008

PubMed Central

Gupta, B. M.; Bala, Adarsh

2011-01-01

Objective: This study analyzes the research activities of India in medicine during 1999–2008, based on the total publication output, its growth rate, quality of papers published and rank of India in the global context. Patterns of international collaborative research output and the major partner countries of India are also discussed. This study also evaluates the research performance of different types of Indian medical colleges, hospitals, research institutes, universities and research foundations and the characteristics of published literature in Indian and foreign journals. It also analyzes the medical research output by disease and organs. Materials and Methods: The publication data on medicine has been retrieved by using SCOPUS database. Results: India holds 12th rank among the productive countries in medicine research consisting of 65,745 papers with a global publication share of 1.59% and registering a growth rate of 76.68% for the papers published during 1999–2003 to 2004–2008. Conclusion: High quality research in India is grossly inadequate and requires strategic planning, investment and resource support. There is also a need to improve the existing medical education system, which should foster research culture. PMID:22470241

Can scholarship in nursing/midwifery education result in a successful research career?

PubMed

Cooper, Simon; Absalom, Irene; Cant, Robyn; Bogossian, Fiona; Kelly, Michelle; Levett-Jones, Tracy; McKenna, Lisa

2018-05-07

In a recent editorial we examined the research outputs of 150 Australian nursing and midwifery professors (McKenna, Cooper, Cant, Bogossian, 2017) identifying publication metrics on par with, and sometimes above those of professors in the UK (Watson, McDonagh & Thompson, 2016). Because global university rankings are heavily weighted towards research, there has been pressure on universities and on academics to maximise research performance (Nguyen, Rambaldi & Tang, 2017). Although many Australian universities have increasingly focused on education delivery, and despite the need for a strong evidence base for learning and teaching, academics are often cautioned against focusing too heavily on educational research. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Honors

NASA Astrophysics Data System (ADS)

2013-11-01

The recently released list of 2013-2014 Fulbright Scholars includes 9 AGU members working on diverse topics. They include Michael Coe, senior scientist/coordinator of the Amazon group at the Woods Hole Research Center, whose topic is "Agricultural expansion in the Brazilian Cerrado and consequences for the water cycle"; Benjamin Crosby, associate professor, Department of Geosciences, Idaho State University, on the topic "Taking the pulse of Chilean rivers: Enhancing educational and academic opportunities in a time of rapid change"; David Fitzjarrald, senior research associate, Atmospheric Sciences Research Center, State University of New York at Albany, on the topic "Landscape heterogeneity and Amazonian mesoclimate: Fostering critical understanding of observations and model output"; and Syed Hasan, professor of geology, Department of Geosciences, University of Missouri-Kansas City, who will be teaching courses in waste management.

Assessing privacy risks in population health publications using a checklist-based approach.

PubMed

O'Keefe, Christine M; Ickowicz, Adrien; Churches, Tim; Westcott, Mark; O'Sullivan, Maree; Khan, Atikur

2017-11-10

Recent growth in the number of population health researchers accessing detailed datasets, either on their own computers or through virtual data centers, has the potential to increase privacy risks. In response, a checklist for identifying and reducing privacy risks in population health analysis outputs has been proposed for use by researchers themselves. In this study we explore the usability and reliability of such an approach by investigating whether different users identify the same privacy risks on applying the checklist to a sample of publications. The checklist was applied to a sample of 100 academic population health publications distributed among 5 readers. Cohen's κ was used to measure interrater agreement. Of the 566 instances of statistical output types found in the 100 publications, the most frequently occurring were counts, summary statistics, plots, and model outputs. Application of the checklist identified 128 outputs (22.6%) with potential privacy concerns. Most of these were associated with the reporting of small counts. Among these identified outputs, the readers found no substantial actual privacy concerns when context was taken into account. Interrater agreement for identifying potential privacy concerns was generally good. This study has demonstrated that a checklist can be a reliable tool to assist researchers with anonymizing analysis outputs in population health research. This further suggests that such an approach may have the potential to be developed into a broadly applicable standard providing consistent confidentiality protection across multiple analyses of the same data. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Reconfigurable logic via gate controlled domain wall trajectory in magnetic network structure

PubMed Central

Murapaka, C.; Sethi, P.; Goolaup, S.; Lew, W. S.

2016-01-01

An all-magnetic logic scheme has the advantages of being non-volatile and energy efficient over the conventional transistor based logic devices. In this work, we present a reconfigurable magnetic logic device which is capable of performing all basic logic operations in a single device. The device exploits the deterministic trajectory of domain wall (DW) in ferromagnetic asymmetric branch structure for obtaining different output combinations. The programmability of the device is achieved by using a current-controlled magnetic gate, which generates a local Oersted field. The field generated at the magnetic gate influences the trajectory of the DW within the structure by exploiting its inherent transverse charge distribution. DW transformation from vortex to transverse configuration close to the output branch plays a pivotal role in governing the DW chirality and hence the output. By simply switching the current direction through the magnetic gate, two universal logic gate functionalities can be obtained in this device. Using magnetic force microscopy imaging and magnetoresistance measurements, all basic logic functionalities are demonstrated. PMID:26839036

The Economic Impact of a College of Pharmacy

PubMed Central

White-Means, Shelley; Wallace, Jeff

2008-01-01

Objectives To quantify the dollar value of economic returns to a community when a college of pharmacy attains its fourfold mission of research, service, patient care, and education. Methods United States Bureau of Economic Analyses (BEA) RIMS II input/output analysis and data from student and faculty surveys were used to quantify the economic impact of the University of Tennessee's College of Pharmacy (UTCOP). Results The UTCOP's revenue of $22.4 million resulted in an indirect output impact of over $29.2 million, for a total impact of nearly $51.6 million in output (production of goods and services), while supporting 617.4 jobs and total earnings of $18.5 million during the 2004-2005 school year. Conclusions Demonstrating the economic value of colleges of pharmacy is critical when seeking support from state legislators, foundations, government agencies, professional associations, and industry. Based on this study, UTCOP was able to report that every dollar the state invests in UTCOP yields an estimated net return on investment of $27.90. PMID:18322564

Integrated circuits for accurate linear analogue electric signal processing

NASA Astrophysics Data System (ADS)

Huijsing, J. H.

1981-11-01

The main lines in the design of integrated circuits for accurate analog linear electric signal processing in a frequency range including DC are investigated. A categorization of universal active electronic devices is presented on the basis of the connections of one of the terminals of the input and output ports to the common ground potential. The means for quantifying the attributes of four types of universal active electronic devices are included. The design of integrated operational voltage amplifiers (OVA) is discussed. Several important applications in the field of general instrumentation are numerically evaluated, and the design of operatinal floating amplifiers is presented.

Offshore Wind Turbines - Estimated Noise from Offshore Wind Turbine, Monhegan Island, Maine: Environmental Effects of Offshore Wind Energy Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aker, Pamela M.; Jones, Anthony M.; Copping, Andrea E.

2010-11-23

Deep C Wind, a consortium headed by the University of Maine will test the first U.S. offshore wind platforms in 2012. In advance of final siting and permitting of the test turbines off Monhegan Island, residents of the island off Maine require reassurance that the noise levels from the test turbines will not disturb them. Pacific Northwest National Laboratory, at the request of the University of Maine, and with the support of the U.S. Department of Energy Wind Program, modeled the acoustic output of the planned test turbines.

Growth of Global Publishing Output of Health Economics in the Twenty-First Century: A Bibliographic Insight.

PubMed

Jakovljevic, Mihajlo Michael; Pejcic, Ana V

2017-01-01

Strong growth of interdisciplinary sciences might find exceptional example in academic health economics. We decided to observe the quantitative output in this science since the beginning of the twenty-first century. Electronic search of the published literature was conducted in four different databases: one medical database-MEDLINE/PubMed, two general databases-Scopus/Elsevier and Web of Science (WoS), and one specialized health economic database-NHS Economic Evaluation Database (EED). The applied combination of key words was carefully chosen to cover the most commonly used terms in titles of publications dealing with conceptual areas of health economics. All bibliographic units were taken into account. Within the time horizon from January 1, 2000 to December 31, 2016, without language or limitations on bibliographic unit types, we identified an output ranging approximately from 60,345 to 88,246 records with applied search strategy in MEDLINE/PubMed, Scopus/Elsevier, and WoS. In NHS EED, we detected 14,761 records of economic evaluations of health interventions during the period in which database was maintained and regularly updated. With slightly more than one-third of the identified records, USA clearly dominates in this field. United Kingdom takes a strong second place with about 12% of identified records. Consistently, USA and UK universities are the most frequent among the top 15 affiliations/organizations of the authors of the identified records. Authors from Harvard University contributed to the largest number of the identified records. There is a clear evidence of both the upward stream of blossoming in health economics publications and its acceleration. Based on this bibliographic data set, it is difficult to distinguish the actual impact growth of this output provided dominantly by academia with modest contribution by pharmaceutical/medicinal device industry and diverse national government-based agencies. Further insight into the citation track record of these individual publications could provide helpful upgrade and a perspective on ongoing development.

Funding and Assessment in British Universities: Impact on Theology and Religious Studies

ERIC Educational Resources Information Center

Hinnells, John R.

2004-01-01

This article looks at policies of the British Government relating to teaching, the curriculum, and research and how they impact Theology and Religious Studies (TRS). It reflects on the use of Government funding to steer research outputs and to focus such activity on a small number of selected institutions. It further discusses Government attempts…

The Internal Efficiency in Higher Education: An Analysis Based on Economies of Scope

ERIC Educational Resources Information Center

Gang, Cheng; Keming, Wu

2008-01-01

Among the studies of the internal efficiency in higher education, most have focused on the scale of university (the economies of scale), but little on internal operating efficiency in higher education, especially on the combined efficiency of outputs (the economies of scope). There are few theoretical discussions or experimental research on…

Digital computer processing of LANDSAT data for North Alabama. [Linestone County, Madison County, Jackson County, Marshall County, and DeKalb County

NASA Technical Reports Server (NTRS)

Bond, A. D.; Atkinson, R. J.; Lybanon, M.; Ramapriyan, H. K.

1977-01-01

Computer processing procedures and programs applied to Multispectral Scanner data from LANDSAT are described. The output product produced is a level 1 land use map in conformance with a Universal Transverse Mercator projection. The region studied was a five-county area in north Alabama.

Universal Production Patterns and Ambient Language Influences in Babbling: A Cross-Linguistic Study of Korean- and English-Learning Infants

ERIC Educational Resources Information Center

Lee, Sue Ann S.; Davis, Barbara; MacNeilage, Peter

2010-01-01

The phonetic characteristics of canonical babbling produced by Korean- and English-learning infants were compared with consonant and vowel frequencies observed in infant-directed speech produced by Korean- and English-speaking mothers. For infant output, babbling samples from six Korean-learning infants were compared with an existing English…

The Canadian Labour Market: Readings in Manpower Economics.

ERIC Educational Resources Information Center

Kruger, A.M., Ed.; Meltz, N.M., Ed.

Canadian manpower problems were researched by a group of economists at the University of Toronto in areas of interest to manpower planners and students of the labor market. The dissatisfaction of policy makers with the present operation of the labor market is discussed in three areas: (1) inadequate output due to alleged labor shortages, (2)…

Oral History in All 50 States; Two Major Openings, Input/Output, 1975.

ERIC Educational Resources Information Center

Columbia Univ., New York, NY. Oral History Research Office.

Statistics show the vigorous growth of oral history programs in the United States since 1965. Recent events at the Oral History Research Office, Columbia University, include the opening of two new memoirs (Francis Perkins and Henry A. Wallace); a successful oral history course; and projects in progress in business, English literature,…

Cost Functions for Airframe Production Programs.

DTIC Science & Technology

1982-07-01

0 : 666QOOO 66u666=6L66 𔃺" ~ JM. ~ ~ OJ M %~ 0v Z𔃾:O 14% tqv6 Z6 6 𔃺 *1 199 REFERENCES 1. Alchian, Armen A. "Costs and Outputs." In, The...Allocation of Economic Resources, Edited by Moses Abramovitz. Stanford, California: Stanford University Press, 1959. 2. Alchian, Armen A. "Reliability of

Research Publication Output by Academicians in Public and Private Universities in Malaysia

ERIC Educational Resources Information Center

Suryani, Ina; Yaacob, Aizan; Hashima, Noor; Rashid, Salleh Abd; Desa, Hazry

2013-01-01

The number of publication has been one of the measurement values in the performance evaluation for higher education academicians. Over the years, the obligation to publish has amplified to not just on getting published but also on getting published in high quality journal whereby the quality ranking is determined by publication categories. This…

Academics, the "Cultural Third Mission" and the BBC: Forgotten Histories of Knowledge Creation, Transformation and Impact

ERIC Educational Resources Information Center

Smith, David N.

2013-01-01

This article focuses on historical dimensions of knowledge creation and transformation by university academics. It explores their often overlooked role in the broadcast output of BBC radio in disseminating knowledge and ideas outside the educational environment, directly into the homes of the audience. Examples of this activity include the Open…

The Learning-Paradigm Campus: From Single- to Double-Loop Learning

ERIC Educational Resources Information Center

Tagg, John

2010-01-01

Since the 1980s, advocates for change in higher education have called for double-loop learning. One of the main criticisms of the evaluation of colleges and universities was that they measured inputs rather than the outputs. Higher education now needs to apply the lessons of learning and change to campus leadership and organization.

Mind over Matter: A Popular Pediatrician Stretches a Synapse or Two

ERIC Educational Resources Information Center

Willingham, Daniel T.

2005-01-01

Mel Levine writes about learning disabilities in a way that sometimes invites satire. The premise of his 2003 book, "The Myth of Laziness," for example, is that a child who appears lazy probably does not lack motivation, but rather suffers from "output failure." Levine, a professor of pediatrics at the University of North…

The Journal of Accelerated Learning and Teaching, 1998.

ERIC Educational Resources Information Center

Boy, Nancy Omaha, Ed.

1998-01-01

This document comprises the entire output for the journal for 1998. The first article is in the form of a modified excerpt from an article by Donna I. Ali of the University of Calgary on "Multiple Intelligences and the Writing Process: Some Implications for Teaching." The article investigates why writing is difficult for some and easy for others,…

Students' Readiness for E-Learning: A Case Study of Sukhothai Thammathirat Open University, Thailand

ERIC Educational Resources Information Center

Tuntirojanawong, Suttiwan

2013-01-01

The process of e-learning is the operations that involve humans, computers, the Internet, and instructional material, and that produces the outputs to learners and the organization. The purposes of this research were (1) to study students' readiness for e-learning of graduate students majoring in educational administration, School of Educational…

Ethiopian EFL Teachers' Perceptions and Utilization of Mediational Potentials of the Internet in ELT

ERIC Educational Resources Information Center

Boersma, Emily; Getu, Tesfamichael

2016-01-01

The Internet has immense mediational potential in ELT in terms of providing learners with comprehensible input, a platform for social interaction, and opportunities to produce linguistic output. This study explores EFL teachers' perceptions and utilization of the Internet in ELT at Bahir Dar University (BDU) in Ethiopia; it also identifies the…

Appraising the Cost Efficiency of Higher Technological and Vocational Education Institutions in Taiwan Using the Metafrontier Cost-Function Model

ERIC Educational Resources Information Center

Lu, Yung-Hsiang; Chen, Ku-Hsieh

2013-01-01

This paper aims at appraising the cost efficiency and technology of institutions of higher technological and vocational education. Differing from conventional literature, it considers the potential influence of inherent discrepancies in output quality and characteristics of school systems for institutes of technology (ITs) and universities of…

Commissioning a passive-scattering proton therapy nozzle for accurate SOBP delivery.

PubMed

Engelsman, M; Lu, H M; Herrup, D; Bussiere, M; Kooy, H M

2009-06-01

Proton radiotherapy centers that currently use passively scattered proton beams do field specific calibrations for a non-negligible fraction of treatment fields, which is time and resource consuming. Our improved understanding of the passive scattering mode of the IBA universal nozzle, especially of the current modulation function, allowed us to re-commission our treatment control system for accurate delivery of SOBPs of any range and modulation, and to predict the output for each of these fields. We moved away from individual field calibrations to a state where continued quality assurance of SOBP field delivery is ensured by limited system-wide measurements that only require one hour per week. This manuscript reports on a protocol for generation of desired SOBPs and prediction of dose output.

Solid polystyrene and deuterated polystyrene light output response to fast neutrons

NASA Astrophysics Data System (ADS)

Simpson, R.; Danly, C.; Glebov, V. Yu.; Hurlbut, C.; Merrill, F. E.; Volegov, P. L.; Wilde, C.

2016-04-01

The Neutron Imaging System has proven to be an important diagnostic in studying DT implosion characteristics at the National Ignition Facility. The current system depends on a polystyrene scintillating fiber array, which detects fusion neutrons born in the DT hotspot as well as neutrons that have scattered to lower energies in the surrounding cold fuel. Increasing neutron yields at NIF, as well as a desire to resolve three-dimensional information about the fuel assembly, have provided the impetus to build and install two additional next-generation neutron imaging systems. We are currently investigating a novel neutron imaging system that will utilize a deuterated polystyrene (CD) fiber array instead of standard hydrogen-based polystyrene (CH). Studies of deuterated xylene or deuterated benzene liquid scintillator show an improvement in imaging resolution by a factor of two [L. Disdier et al., Rev. Sci. Instrum. 75, 2134 (2004)], but also a reduction in light output [V. Bildstein et al., Nucl. Instrum. Methods Phys. Res., Sect. A 729, 188 (2013); M. I. Ojaruega, Ph.D. thesis, University of Michigan, 2009; M. T. Febbraro, Ph.D. thesis, University of Michigan, 2014] as compared to standard plastic. Tests of the relative light output of deuterated polystyrene and standard polystyrene were completed using 14 MeV fusion neutrons generated through implosions of deuterium-tritium filled capsules at the OMEGA laser facility. In addition, we collected data of the relative response of these two scintillators to a wide energy range of neutrons (1-800 MeV) at the Weapons Neutrons Research Facility. Results of these measurements are presented.

Solid polystyrene and deuterated polystyrene light output response to fast neutrons.

PubMed

Simpson, R; Danly, C; Glebov, V Yu; Hurlbut, C; Merrill, F E; Volegov, P L; Wilde, C

2016-04-01

The Neutron Imaging System has proven to be an important diagnostic in studying DT implosion characteristics at the National Ignition Facility. The current system depends on a polystyrene scintillating fiber array, which detects fusion neutrons born in the DT hotspot as well as neutrons that have scattered to lower energies in the surrounding cold fuel. Increasing neutron yields at NIF, as well as a desire to resolve three-dimensional information about the fuel assembly, have provided the impetus to build and install two additional next-generation neutron imaging systems. We are currently investigating a novel neutron imaging system that will utilize a deuterated polystyrene (CD) fiber array instead of standard hydrogen-based polystyrene (CH). Studies of deuterated xylene or deuterated benzene liquid scintillator show an improvement in imaging resolution by a factor of two [L. Disdier et al., Rev. Sci. Instrum. 75, 2134 (2004)], but also a reduction in light output [V. Bildstein et al., Nucl. Instrum. Methods Phys. Res., Sect. A 729, 188 (2013); M. I. Ojaruega, Ph.D. thesis, University of Michigan, 2009; M. T. Febbraro, Ph.D. thesis, University of Michigan, 2014] as compared to standard plastic. Tests of the relative light output of deuterated polystyrene and standard polystyrene were completed using 14 MeV fusion neutrons generated through implosions of deuterium-tritium filled capsules at the OMEGA laser facility. In addition, we collected data of the relative response of these two scintillators to a wide energy range of neutrons (1-800 MeV) at the Weapons Neutrons Research Facility. Results of these measurements are presented.

Solid polystyrene and deuterated polystyrene light output response to fast neutrons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, R., E-mail: raspberry@lanl.gov; Danly, C.; Merrill, F. E.

The Neutron Imaging System has proven to be an important diagnostic in studying DT implosion characteristics at the National Ignition Facility. The current system depends on a polystyrene scintillating fiber array, which detects fusion neutrons born in the DT hotspot as well as neutrons that have scattered to lower energies in the surrounding cold fuel. Increasing neutron yields at NIF, as well as a desire to resolve three-dimensional information about the fuel assembly, have provided the impetus to build and install two additional next-generation neutron imaging systems. We are currently investigating a novel neutron imaging system that will utilize amore » deuterated polystyrene (CD) fiber array instead of standard hydrogen-based polystyrene (CH). Studies of deuterated xylene or deuterated benzene liquid scintillator show an improvement in imaging resolution by a factor of two [L. Disdier et al., Rev. Sci. Instrum. 75, 2134 (2004)], but also a reduction in light output [V. Bildstein et al., Nucl. Instrum. Methods Phys. Res., Sect. A 729, 188 (2013); M. I. Ojaruega, Ph.D. thesis, University of Michigan, 2009; M. T. Febbraro, Ph.D. thesis, University of Michigan, 2014] as compared to standard plastic. Tests of the relative light output of deuterated polystyrene and standard polystyrene were completed using 14 MeV fusion neutrons generated through implosions of deuterium-tritium filled capsules at the OMEGA laser facility. In addition, we collected data of the relative response of these two scintillators to a wide energy range of neutrons (1-800 MeV) at the Weapons Neutrons Research Facility. Results of these measurements are presented.« less

A nano universal joint made from curved double-walled carbon nanotubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Kun; Cai, Haifang; Shi, Jiao

2015-06-15

A nano universal joint is constructed from curved double-wall carbon nanotubes with a short outer tube as stator and a long inner tube as a rotor. When one end of the rotor is driven (by a rotary motor) to rotate, the same rotational speed but with different rotational direction will be induced at the other end of the rotor. This mechanism makes the joint useful for designing a flexible nanodevice with an adjustable output rotational signal. The motion transmission effect of the universal joint is analyzed using a molecular dynamics simulation approach. In particular, the effects of three factors aremore » investigated. The first factor is the curvature of the stator, which produces a different rotational direction of the rotor at the output end. The second is the bonding conditions of carbon atoms on the adjacent tube ends of the motor and the rotor, sp{sup 1} or sp{sup 2} atoms, which create different attraction between the motor and the rotor. The third is the rotational speed of the motor, which can be considered as the input signal of the universal joint. It is noted that the rotor's rotational speed is usually the same as that of the motor when the carbon atoms on the adjacent ends of the motor and the rotor are sp{sup 1} carbon atoms. When they become the new sp{sup 2} atoms, the rotor experiences a jump in rotational speed from a lower value to that of the motor. The mechanism of drops in potential of the motor is revealed. If the carbon atoms on the adjacent ends are sp{sup 2} atoms, the rotor rotates more slowly than the motor, whereas the rotational speed is stable when driven by a higher speed motor.« less

A nano universal joint made from curved double-walled carbon nanotubes

NASA Astrophysics Data System (ADS)

Cai, Kun; Cai, Haifang; Shi, Jiao; Qin, Qing H.

2015-06-01

A nano universal joint is constructed from curved double-wall carbon nanotubes with a short outer tube as stator and a long inner tube as a rotor. When one end of the rotor is driven (by a rotary motor) to rotate, the same rotational speed but with different rotational direction will be induced at the other end of the rotor. This mechanism makes the joint useful for designing a flexible nanodevice with an adjustable output rotational signal. The motion transmission effect of the universal joint is analyzed using a molecular dynamics simulation approach. In particular, the effects of three factors are investigated. The first factor is the curvature of the stator, which produces a different rotational direction of the rotor at the output end. The second is the bonding conditions of carbon atoms on the adjacent tube ends of the motor and the rotor, sp1 or sp2 atoms, which create different attraction between the motor and the rotor. The third is the rotational speed of the motor, which can be considered as the input signal of the universal joint. It is noted that the rotor's rotational speed is usually the same as that of the motor when the carbon atoms on the adjacent ends of the motor and the rotor are sp1 carbon atoms. When they become the new sp2 atoms, the rotor experiences a jump in rotational speed from a lower value to that of the motor. The mechanism of drops in potential of the motor is revealed. If the carbon atoms on the adjacent ends are sp2 atoms, the rotor rotates more slowly than the motor, whereas the rotational speed is stable when driven by a higher speed motor.

Evaluation of nuclear facility decommissioning projects. Summary report: North Carolina State University Research and Training Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Link, B.W.; Miller, R.L.

1983-08-01

This document summarizes information from the decommissioning of the NCSUR-3 (R-3), a 10 KWt university research and training reactor. The decommissioning data were placed in a computerized information retrieval/manipulation system which permits future utilization of this information in pre-decommissioning activities with other university reactors of similar design. The information is presented both in some detail in its computer output form and also as a manually assembled summarization which highlights the more significant aspects of the decommissioning project. Decommissioning data from a generic study, NUREG/CR 1756, Technology, Safety and Costs of Decommissioning Nuclear Research and Test Reactors, and the decommissioning ofmore » the Ames Laboratory Research Reactor (ALRR), a 5 MWt research reactor, is also included for comparison.« less

Empirical relationships among oliguria, creatinine, mortality, and renal replacement therapy in the critically ill.

PubMed

Mandelbaum, Tal; Lee, Joon; Scott, Daniel J; Mark, Roger G; Malhotra, Atul; Howell, Michael D; Talmor, Daniel

2013-03-01

The observation periods and thresholds of serum creatinine and urine output defined in the Acute Kidney Injury Network (AKIN) criteria were not empirically derived. By continuously varying creatinine/urine output thresholds as well as the observation period, we sought to investigate the empirical relationships among creatinine, oliguria, in-hospital mortality, and receipt of renal replacement therapy (RRT). Using a high-resolution database (Multiparameter Intelligent Monitoring in Intensive Care II), we extracted data from 17,227 critically ill patients with an in-hospital mortality rate of 10.9 %. The 14,526 patients had urine output measurements. Various combinations of creatinine/urine output thresholds and observation periods were investigated by building multivariate logistic regression models for in-hospital mortality and RRT predictions. For creatinine, both absolute and percentage increases were analyzed. To visualize the dependence of adjusted mortality and RRT rate on creatinine, the urine output, and the observation period, we generated contour plots. Mortality risk was high when absolute creatinine increase was high regardless of the observation period, when percentage creatinine increase was high and the observation period was long, and when oliguria was sustained for a long period of time. Similar contour patterns emerged for RRT. The variability in predictive accuracy was small across different combinations of thresholds and observation periods. The contour plots presented in this article complement the AKIN definition. A multi-center study should confirm the universal validity of the results presented in this article.

Homeostasis, singularities, and networks.

PubMed

Golubitsky, Martin; Stewart, Ian

2017-01-01

Homeostasis occurs in a biological or chemical system when some output variable remains approximately constant as an input parameter [Formula: see text] varies over some interval. We discuss two main aspects of homeostasis, both related to the effect of coordinate changes on the input-output map. The first is a reformulation of homeostasis in the context of singularity theory, achieved by replacing 'approximately constant over an interval' by 'zero derivative of the output with respect to the input at a point'. Unfolding theory then classifies all small perturbations of the input-output function. In particular, the 'chair' singularity, which is especially important in applications, is discussed in detail. Its normal form and universal unfolding [Formula: see text] is derived and the region of approximate homeostasis is deduced. The results are motivated by data on thermoregulation in two species of opossum and the spiny rat. We give a formula for finding chair points in mathematical models by implicit differentiation and apply it to a model of lateral inhibition. The second asks when homeostasis is invariant under appropriate coordinate changes. This is false in general, but for network dynamics there is a natural class of coordinate changes: those that preserve the network structure. We characterize those nodes of a given network for which homeostasis is invariant under such changes. This characterization is determined combinatorially by the network topology.

Use of output from high-resolution atmospheric models in landscape-scale hydrologic models: An assessment

USGS Publications Warehouse

Hostetler, S.W.; Giorgi, F.

1993-01-01

In this paper we investigate the feasibility of coupling regional climate models (RCMs) with landscape-scale hydrologic models (LSHMs) for studies of the effects of climate on hydrologic systems. The RCM used is the National Center for Atmospheric Research/Pennsylvania State University mesoscale model (MM4). Output from two year-round simulations (1983 and 1988) over the western United States is used to drive a lake model for Pyramid Lake in Nevada and a streamfiow model for Steamboat Creek in Oregon. Comparisons with observed data indicate that MM4 is able to produce meteorologic data sets that can be used to drive hydrologic models. Results from the lake model simulations indicate that the use of MM4 output produces reasonably good predictions of surface temperature and evaporation. Results from the streamflow simulations indicate that the use of MM4 output results in good simulations of the seasonal cycle of streamflow, but deficiencies in simulated wintertime precipitation resulted in underestimates of streamflow and soil moisture. Further work with climate (multiyear) simulations is necessary to achieve a complete analysis, but the results from this study indicate that coupling of LSHMs and RCMs may be a useful approach for evaluating the effects of climate change on hydrologic systems.

Cortico-Cerebellar Structural Connectivity Is Related to Residual Motor Output in Chronic Stroke.

PubMed

Schulz, Robert; Frey, Benedikt M; Koch, Philipp; Zimerman, Maximo; Bönstrup, Marlene; Feldheim, Jan; Timmermann, Jan E; Schön, Gerhard; Cheng, Bastian; Thomalla, Götz; Gerloff, Christian; Hummel, Friedhelm C

2017-01-01

Functional imaging studies have argued that interactions between cortical motor areas and the cerebellum are relevant for motor output and recovery processes after stroke. However, the impact of the underlying structural connections is poorly understood. To investigate this, diffusion-weighted brain imaging was conducted in 26 well-characterized chronic stroke patients (aged 63 ± 1.9 years, 18 males) with supratentorial ischemic lesions and 26 healthy participants. Probabilistic tractography was used to reconstruct reciprocal cortico-cerebellar tracts and to relate their microstructural integrity to residual motor functioning applying linear regression modeling. The main finding was a significant association between cortico-cerebellar structural connectivity and residual motor function, independent from the level of damage to the cortico-spinal tract. Specifically, white matter integrity of the cerebellar outflow tract, the dentato-thalamo-cortical tract, was positively related to both general motor output and fine motor skills. Additionally, the integrity of the descending cortico-ponto-cerebellar tract contributed to rather fine motor skills. A comparable structure-function relationship was not evident in the controls. The present study provides first tract-related structural data demonstrating a critical importance of distinct cortico-cerebellar connections for motor output after stroke. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Cerebral oxygen saturation and cardiac output during anaesthesia in sitting position for neurosurgical procedures: a prospective observational study.

PubMed

Schramm, P; Tzanova, I; Hagen, F; Berres, M; Closhen, D; Pestel, G; Engelhard, K

2016-10-01

Neurosurgical operations in the dorsal cranium often require the patient to be positioned in a sitting position. This can be associated with decreased cardiac output and cerebral hypoperfusion, and possibly, inadequate cerebral oxygenation. In the present study, cerebral oxygen saturation was measured during neurosurgery in the sitting position and correlated with cardiac output. Perioperative cerebral oxygen saturation was measured continuously with two different monitors, INVOS ® and FORE-SIGHT ® . Cardiac output was measured at eight predefined time points using transoesophageal echocardiography. Forty patients were enrolled, but only 35 (20 female) were eventually operated on in the sitting position. At the first time point, the regional cerebral oxygen saturation measured with INVOS ® was 70 (sd 9)%; thereafter, it increased by 0.0187% min -1 (P<0.01). The cerebral tissue oxygen saturation measured with FORE-SIGHT ® started at 68 (sd 13)% and increased by 0.0142% min -1 (P<0.01). The mean arterial blood pressure did not change. Cardiac output was between 6.3 (sd 1.3) and 7.2 (1.8) litre min -1 at the predefined time points. Cardiac output, but not mean arterial blood pressure, showed a positive and significant correlation with cerebral oxygen saturation. During neurosurgery in the sitting position, the cerebral oxygen saturation slowly increases and, therefore, this position seems to be safe with regard to cerebral oxygen saturation. Cerebral oxygen saturation is stable because of constant CO and MAP, while the influence of CO on cerebral oxygen saturation seems to be more relevant. NCT01275898. © The Author 2016. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Estimation technique of corrective effects for forecasting of reliability of the designed and operated objects of the generating systems

NASA Astrophysics Data System (ADS)

Truhanov, V. N.; Sultanov, M. M.

2017-11-01

In the present article researches of statistical material on the refusals and malfunctions influencing operability of heat power installations have been conducted. In this article the mathematical model of change of output characteristics of the turbine depending on number of the refusals revealed in use has been presented. The mathematical model is based on methods of mathematical statistics, probability theory and methods of matrix calculation. The novelty of this model is that it allows to predict the change of the output characteristic in time, and the operating influences have been presented in an explicit form. As desirable dynamics of change of the output characteristic (function, reliability) the law of distribution of Veybull which is universal is adopted since at various values of parameters it turns into other types of distributions (for example, exponential, normal, etc.) It should be noted that the choice of the desirable law of management allows to determine the necessary management parameters with use of the saved-up change of the output characteristic in general. The output characteristic can be changed both on the speed of change of management parameters, and on acceleration of change of management parameters. In this article the technique of an assessment of the pseudo-return matrix has been stated in detail by the method of the smallest squares and the standard Microsoft Excel functions. Also the technique of finding of the operating effects when finding restrictions both for the output characteristic, and on management parameters has been considered. In the article the order and the sequence of finding of management parameters has been stated. A concrete example of finding of the operating effects in the course of long-term operation of turbines has been shown.

Computerized symptom and quality-of-life assessment for patients with cancer part II: acceptability and usability.

PubMed

Mullen, Kristin H; Berry, Donna L; Zierler, Brenda K

2004-09-01

To determine the acceptability and usability of a computerized quality-of-life (QOL) and symptom assessment tool and the graphically displayed QOL and symptom output in an ambulatory radiation oncology clinic. Descriptive, cross-sectional. Radiation oncology clinic located in an urban university medical center. 45 patients with cancer being evaluated for radiation therapy and 10 clinicians, who submitted 12 surveys. Acceptability of the computerized assessment was measured with an online, 16-item, Likert-style survey delivered as 45 patients undergoing radiation therapy completed a 25-item QOL and symptom assessment. Usability of the graphic output was assessed with clinician completion of a four-item paper survey. Acceptability and usability of computerized patient assessment. The patient acceptability survey indicated that 70% (n = 28) liked computers and 10% (n = 4) did not. The program was easy to use for 79% (n = 26), easy to understand for 91% (n = 30), and enjoyable for 71% (n = 24). Seventy-six percent (n = 25) believed that the amount of time needed to complete the computerized survey was acceptable. Sixty-six percent (n = 21) responded that they were satisfied with the program, and none of the participants chose the very dissatisfied response. Eighty-three percent (n = 10) of the clinicians found the graphic output helpful in promoting communication with patients, 75% (n = 9) found the output report helpful in identifying appropriate areas of QOL deficits or concerns, and 83% (n = 10) indicated that the output helped guide clinical interactions with patients. The computer-based QOL and symptom assessment tool is acceptable to patients, and the graphically displayed QOL and symptom output is useful to radiation oncology nurses and physicians. Wider application of computerized patient-generated data can continue in various cancer settings and be tested for clinical and organizational outcomes.

Application of IMPLAN to Extension Programs: Economic Impacts of the University of Arizona Cooperative Extension SNAP-Ed Spending

ERIC Educational Resources Information Center

Kerna, Ashley; Frisvold, George; Jacobs, Laurel; Farrell, Vanessa A.; Houtkooper, Linda; Misner, Scottie

2015-01-01

Many Extension programs are turning to the input-output software IMPLAN to demonstrate economic impacts. IMPLAN is a powerful tool that can be used to estimate the total economic activity associated with an industry, event, or policy. One possible application, therefore, is to use program spending data to estimate the economic effects of…

Current Practice in Research Ethics: Global Trends and New Opportunities for African Universities. Research and Innovation Policy Series. Number 1

ERIC Educational Resources Information Center

Roberts, Liam

2007-01-01

Research Ethics has emerged as one of the most well-developed policy areas within the sphere of Research and Innovation Management. As such, for African institutions looking to strengthen their policy frameworks, develop increased collaborations, and increase research outputs, a thorough understanding of global trends in Ethics will be vital.…

Forecasting the Effects of Higher Education Appropriations on Local Economies. AIR 1986 Annual Forum Paper.

ERIC Educational Resources Information Center

Prewitt, Sidney A.; And Others

An economic model of the effects of colleges on their communities was developed. The Texas Input-Output Model was modified into a higher education budgetary model. Included were the positive benefits of tax savings and estimates of the net effect on various communities in which state-supported colleges and universities are located. The output…

Datasets Reflecting Students' and Teachers' Views on the Use of Learning Technology in a UK University

ERIC Educational Resources Information Center

Limniou, Maria; Downes, John J.; Maskell, Simon

2015-01-01

Nowadays, the use of datasets is of crucial importance for the advancement of educational research. Specifically in the field of Higher Education, many researchers might share through online data repositories their research outputs in order for data to be reusable, accessible and accountable to educational community. The aim of this paper is to…

The Contemporary Academic: Orientation towards Research Work and Researcher Identity of Higher Education Lecturers in the Health Professions

ERIC Educational Resources Information Center

Boyd, Pete; Smith, Caroline

2016-01-01

Internationally, the increasing emphasis in universities on the quality of teaching, on student employability and on a corporate approach to entrepreneurial income generation has created a tension around the primacy afforded to published research outputs as a focus for academic work and status. In this study, a framework for academic socialisation…

Using Automatic Speech Recognition to Dictate Mathematical Expressions: The Development of the "TalkMaths" Application at Kingston University

ERIC Educational Resources Information Center

Wigmore, Angela; Hunter, Gordon; Pflugel, Eckhard; Denholm-Price, James; Binelli, Vincent

2009-01-01

Speech technology--especially automatic speech recognition--has now advanced to a level where it can be of great benefit both to able-bodied people and those with various disabilities. In this paper we describe an application "TalkMaths" which, using the output from a commonly-used conventional automatic speech recognition system,…

Graded Reflectivity Mirror for the Solid State Heat Capacity Laser Final Report CRADA No. TC-2085-04

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamamoto, R.; Davis, J. A.

This was a collaborative effort between The Regents of the University of California, Lawrence Livermore National Laboratory (LLNL) and the Boeing Company, to develop a Graded Reflectivity Mirror (GRM) to achieve improved near field fill and higher brightness in the far field output of LLNL’s Solid State Heat Capacity Laser (SSHCL).

Factors Challenging and Supporting Scholarly Activity for Academic Staff in a Regional Australian University Environment

ERIC Educational Resources Information Center

Hurley, John; Bowling, Alison; Griffiths, Jean; Blair, Duncan

2015-01-01

With expectations of academic staff to achieve high quality teaching and research outputs as performance measures it is timely to explore how staff perceive they are being supported to meet these ends. This article presents findings of a multi-method study that explored influences impacting on the quality and quantity of scholarly activity being…

Manual for Training in the Application of the Principles and Standards of the Water Resources Council.

ERIC Educational Resources Information Center

Caulfield, Henry P., Jr., Ed.; And Others

This manual is one of four planned outputs of a training project conducted by the Environmental Resources Center of Colorado State University with the cooperation of the Water Resources Council. The purpose of this manual, together with the videotapes of lectures given during the project, is to provide materials for the conducting of similar…

Features and impacts of five multidisciplinary community-university research partnerships.

PubMed

King, Gillian; Servais, Michelle; Forchuk, Cheryl; Chalmers, Heather; Currie, Melissa; Law, Mary; Specht, Jacqueline; Rosenbaum, Peter; Willoughby, Teena; Kertoy, Marilyn

2010-01-01

Despite the increasing number of multidisciplinary community-university research partnerships designed to address real-world issues, little is known about their nature. This article describes the features and impacts of five research partnerships addressing health or social service issues, which constituted a convenience sample from the province of Ontario, Canada. The article describes their characteristics, ways of operating, outputs, types of requests received from community members and mid-term impacts. Requests directed to partnerships were tracked over a 10-month period in 2003 to 2004, using a research contact checklist, and 174 community members later completed an impact questionnaire capturing perceptions of the impacts of the partnerships on personal knowledge and research skill development, organisational/group access to and use of information, and community and organisational development. The data indicated that partnerships had similar priorities and magnitudes of mid-term impacts, yet differed in the scope of their partnering, realm of intended influence and the number of mechanisms used to engage and communicate with target audiences. The partnerships produced different types of outputs and received different types of requests from community members. The findings inform researchers about partnership diversity and help to establish more realistic expectations about the magnitude of partnerships' impacts.

Development of a web geoservices platform for School of Environmental Sciences, Mahatma Gandhi University, Kerala, India

NASA Astrophysics Data System (ADS)

Satheendran, S.; John, C. M.; Fasalul, F. K.; Aanisa, K. M.

2014-11-01

Web geoservices is the obvious graduation of Geographic Information System in a distributed environment through a simple browser. It enables organizations to share domain-specific rich and dynamic spatial information over the web. The present study attempted to design and develop a web enabled GIS application for the School of Environmental Sciences, Mahatma Gandhi University, Kottayam, Kerala, India to publish various geographical databases to the public through its website. The development of this project is based upon the open source tools and techniques. The output portal site is platform independent. The premier webgis frame work `Geomoose' is utilized. Apache server is used as the Web Server and the UMN Map Server is used as the map server for this project. It provides various customised tools to query the geographical database in different ways and search for various facilities in the geographical area like banks, attractive places, hospitals, hotels etc. The portal site was tested with the output geographical database of 2 projects of the School such as 1) the Tourism Information System for the Malabar region of Kerala State consisting of 5 northern districts 2) the geoenvironmental appraisal of the Athirappilly Hydroelectric Project covering the entire Chalakkudy river basin.

Design of a universal two-layered neural network derived from the PLI theory

NASA Astrophysics Data System (ADS)

Hu, Chia-Lun J.

2004-05-01

The if-and-only-if (IFF) condition that a set of M analog-to-digital vector-mapping relations can be learned by a one-layered-feed-forward neural network (OLNN) is that all the input analog vectors dichotomized by the i-th output bit must be positively, linearly independent, or PLI. If they are not PLI, then the OLNN just cannot learn no matter what learning rules is employed because the solution of the connection matrix does not exist mathematically. However, in this case, one can still design a parallel-cascaded, two-layered, perceptron (PCTLP) to acheive this general mapping goal. The design principle of this "universal" neural network is derived from the major mathematical properties of the PLI theory - changing the output bits of the dependent relations existing among the dichotomized input vectors to make the PLD relations PLI. Then with a vector concatenation technique, the required mapping can still be learned by this PCTLP system with very high efficiency. This paper will report in detail the mathematical derivation of the general design principle and the design procedures of the PCTLP neural network system. It then will be verified in general by a practical numerical example.

Scientific Production of Medical Universities in the West of Iran: a Scientometric Analysis.

PubMed

Rasolabadi, Masoud; Khaledi, Shahnaz; Khayati, Fariba; Kalhor, Marya Maryam; Penjvini, Susan; Gharib, Alireza

2015-08-01

This study aimed to compare scientific production by providing quantitative evaluation of science output in five Western Iranian Medical Universities including Hamedan, Ilam, Kermanshah, Kurdistan and Lorestan University of Medical Sciences using scientometrics indicators based on data indexed in Scopus for period between the years 2010 to 2014. In this scientometric study data were collected using Scopus database. Both searching and analyzing features of Scopus were used to data retrieval and analysis. We used Scientometrics indicators including number of publications, number of citations, nationalization index (NI), Internationalization Index (INI), H-index, average number of citations per paper, and growth index. Five Western Iranian Universities produced over 3011 articles from 2010 to 2014. These articles were cited 7158 times with an average rate of 4.2 citations per article. H- Index of under study universities are varying from 14 to 30. Ilam University of Medical Sciences had the highest international collaboration with an INI of 0.33 compared to Hamedan and Kermanshah universities with INI of 0.20 and 0.16 respectively. The lowest international collaboration belonged to Lorestan University of Medical Sciences (0.07). The highest Growth Index belonged to Kurdistan University of Medical Sciences (69.7). Although scientific production of five Western Iranian Medical Universities was increasing, but this trend was not stable. To achieve better performance it is recommended that five Western Iranian Universities stabilize their budgeting and investment policies in research.

ASTEP user's guide and software documentation

NASA Technical Reports Server (NTRS)

Gliniewicz, A. S.; Lachowski, H. M.; Pace, W. H., Jr.; Salvato, P., Jr.

1974-01-01

The Algorithm Simulation Test and Evaluation Program (ASTEP) is a modular computer program developed for the purpose of testing and evaluating methods of processing remotely sensed multispectral scanner earth resources data. ASTEP is written in FORTRAND V on the UNIVAC 1110 under the EXEC 8 operating system and may be operated in either a batch or interactive mode. The program currently contains over one hundred subroutines consisting of data classification and display algorithms, statistical analysis algorithms, utility support routines, and feature selection capability. The current program can accept data in LARSC1, LARSC2, ERTS, and Universal formats, and can output processed image or data tapes in Universal format.

Efficient universal blind quantum computation.

PubMed

Giovannetti, Vittorio; Maccone, Lorenzo; Morimae, Tomoyuki; Rudolph, Terry G

2013-12-06

We give a cheat sensitive protocol for blind universal quantum computation that is efficient in terms of computational and communication resources: it allows one party to perform an arbitrary computation on a second party's quantum computer without revealing either which computation is performed, or its input and output. The first party's computational capabilities can be extremely limited: she must only be able to create and measure single-qubit superposition states. The second party is not required to use measurement-based quantum computation. The protocol requires the (optimal) exchange of O(Jlog2(N)) single-qubit states, where J is the computational depth and N is the number of qubits needed for the computation.

Quantum cost optimized design of 4-bit reversible universal shift register using reduced number of logic gate

NASA Astrophysics Data System (ADS)

Maity, H.; Biswas, A.; Bhattacharjee, A. K.; Pal, A.

In this paper, we have proposed the design of quantum cost (QC) optimized 4-bit reversible universal shift register (RUSR) using reduced number of reversible logic gates. The proposed design is very useful in quantum computing due to its low QC, less no. of reversible logic gate and less delay. The QC, no. of gates, garbage outputs (GOs) are respectively 64, 8 and 16 for proposed work. The improvement of proposed work is also presented. The QC is 5.88% to 70.9% improved, no. of gate is 60% to 83.33% improved with compared to latest reported result.

Geotube: a network based framework for Goescience dissemination

NASA Astrophysics Data System (ADS)

Grieco, Giovanni; Porta, Marina; Merlini, Anna Elisabetta; Caironi, Valeria; Reggiori, Donatella

2016-04-01

Geotube is a project promoted by Il Geco cultural association for the dissemination of Geoscience education in schools by open multimedia environments. The approach is based on the following keystones: • A deep and permanent epistemological reflection supported by confrontation within the International Scientific Community • A close link with the territory • A local to global inductive approach to basic concepts in Geosciences • The construction of an open framework to stimulate creativity The project has been developed as an educational activity for secondary schools (11 to 18 years old students). It provides for the creation of a network of institutions to be involved in order to ensure the required diversified expertise. They can comprise: Universities, Natural Parks, Mountain Communities, Municipalities, schools, private companies working in the sector, and so on. A single project lasts for one school year (October to June) and requires 8-12 work hours at school, one or two half day or full day excursions and a final event of presentation of outputs. The possible outputs comprise a pdf or ppt guidebook, a script and a video completely shooted and edited by the students. The framework is open in order to adapt to the single class or workgroup needs, the level and type of school, the time available and different subjects in Geosciences. In the last two years the two parts of the project have been successfully tested separately, while the full project will be presented at schools in in its full form in April 2016, in collaboration with University of Milan, Campo dei Fiori Natural Park, Piambello Mountain Community and Cunardo Municipality. The production of geotube outputs has been tested in a high school for three consecutive years. Students produced scripts and videos on the following subjects: geologic hazards, volcanoes and earthquakes, and climate change. The excursions have been tested with two different high schools. Firstly two areas have been selected for their geodiversity: Val d'Ossola and Varese District, both in the Southern Alps geological region. Then a group of five BS students from University of Milan have been involved in the production of guidebooks and geologic educational itineraries in the two areas. Some of these outputs have been tested within the SOLE (Social Open Learning Environment) Erasmus+ project. Then some of the selected itineraries have been used for excursions with students. Partial tests have so far showed the high educational potential of the Geotube project allowing the creation of a network of institution collaborating for its success in the final complete form.

A need to accelerate health research productivity in an African University: the case of Makerere University College of Health Sciences.

PubMed

Nakanjako, Damalie; Akena, Dickens; Kaye, Dan K; Tumwine, James; Okello, Elialilia; Nakimuli, Annettee; Kambugu, Andrew; McCullough, Hazel; Mayanja-Kizza, Harriet; Kamya, Moses R; Sewankambo, Nelson K

2017-04-21

In the last decade, Makerere University College of Health Sciences (MakCHS) has taken strides in research and training to improve healthcare through collaborative training and research programs. However, there is limited data on the trends of MakCHS faculty contributions to research and on faculty growth to take leading roles in health research. This paper reviews MakCHS faculty research publications over 15.5 years and outlines possible strategies to enhance faculty research outputs. We used a mixed methods approach. A systematic review of research publications by faculty at MakCHS (PubMed and Google Scholar from January 1, 2000, to June 30, 2015) to quantify the number of research articles, areas researched, authorship contribution by MakCHS faculty, source of funding, as well as affiliated local and international collaborations. Graphs were used to shown trends in publications and leadership of authorship by faculty. Annual individual faculty research productivity was presented as publication per capita. Qualitative data on high priority needs to improve research outputs was collected through focus group discussions (FGDs) with faculty members, and analysed manually into emerging themes. Of 298 faculty at MakCHS at 2015, 89 (30%) were female and 229 (77%) were junior and mid-level faculty (senior lecturer and below). The PubMed and Google Scholar searches yielded 6927 published articles, of which 3399 (49%) full-text articles were downloaded for analysis, 426/3825 (11%) available as titles/abstracts only, and 598/4423 (14%) were excluded. Only 614 articles were published in 2014, giving a publication per capita of 2.1 for any authorship, and 0.3 for first and last authorship positions. MakCHS faculty increasingly contributed as first, second, third, and last authors. Up to 57% of research was in infectious diseases, followed by non-communicable diseases (20%) and non-communicable maternal child health (11%). Priority needs to improve research outputs, as expressed by faculty, were (1) an institutionally led faculty career development program, (2) skills building in research methods and scientific writing, (3) protected time for research related activities, (4) opportunities for collaborative research, and (5) use of individual development plans. Faculty research productivity was low and dominated by infectious diseases and non-communicable disease research. There is a need for structured institutional support to optimise faculty research outputs. Only with increased research productivity will MakCHS and other academic institutions be able to make a significant contribution in addressing national health challenges.

CellMiner Companion: an interactive web application to explore CellMiner NCI-60 data.

PubMed

Wang, Sufang; Gribskov, Michael; Hazbun, Tony R; Pascuzzi, Pete E

2016-08-01

The NCI-60 human tumor cell line panel is an invaluable resource for cancer researchers, providing drug sensitivity, molecular and phenotypic data for a range of cancer types. CellMiner is a web resource that provides tools for the acquisition and analysis of quality-controlled NCI-60 data. CellMiner supports queries of up to 150 drugs or genes, but the output is an Excel file for each drug or gene. This output format makes it difficult for researchers to explore the data from large queries. CellMiner Companion is a web application that facilitates the exploration and visualization of output from CellMiner, further increasing the accessibility of NCI-60 data. The web application is freely accessible at https://pul-bioinformatics.shinyapps.io/CellMinerCompanion The R source code can be downloaded at https://github.com/pepascuzzi/CellMinerCompanion.git ppascuzz@purdue.edu Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Adaptive Neural Output-Feedback Control for a Class of Nonlower Triangular Nonlinear Systems With Unmodeled Dynamics.

PubMed

Wang, Huanqing; Liu, Peter Xiaoping; Li, Shuai; Wang, Ding

2017-08-29

This paper presents the development of an adaptive neural controller for a class of nonlinear systems with unmodeled dynamics and immeasurable states. An observer is designed to estimate system states. The structure consistency of virtual control signals and the variable partition technique are combined to overcome the difficulties appearing in a nonlower triangular form. An adaptive neural output-feedback controller is developed based on the backstepping technique and the universal approximation property of the radial basis function (RBF) neural networks. By using the Lyapunov stability analysis, the semiglobally and uniformly ultimate boundedness of all signals within the closed-loop system is guaranteed. The simulation results show that the controlled system converges quickly, and all the signals are bounded. This paper is novel at least in the two aspects: 1) an output-feedback control strategy is developed for a class of nonlower triangular nonlinear systems with unmodeled dynamics and 2) the nonlinear disturbances and their bounds are the functions of all states, which is in a more general form than existing results.

A device for automatically measuring and supervising the critical care patient's urine output.

PubMed

Otero, Abraham; Palacios, Francisco; Akinfiev, Teodor; Fernández, Roemi

2010-01-01

Critical care units are equipped with commercial monitoring devices capable of sensing patients' physiological parameters and supervising the achievement of the established therapeutic goals. This avoids human errors in this task and considerably decreases the workload of the healthcare staff. However, at present there still is a very relevant physiological parameter that is measured and supervised manually by the critical care units' healthcare staff: urine output. This paper presents a patent-pending device capable of automatically recording and supervising the urine output of a critical care patient. A high precision scale is used to measure the weight of a commercial urine meter. On the scale's pan there is a support frame made up of Bosch profiles that isolates the scale from force transmission from the patient's bed, and guarantees that the urine flows properly through the urine meter input tube. The scale's readings are sent to a PC via Bluetooth where an application supervises the achievement of the therapeutic goals. The device is currently undergoing tests at a research unit associated with the University Hospital of Getafe in Spain.

Characterization of the electrical output of flat-plate photovoltaic arrays

NASA Technical Reports Server (NTRS)

Gonzalez, C. C.; Hill, G. M.; Ross, R. G., Jr.

1982-01-01

The electric output of flat-plate photovoltaic arrays changes constantly, due primarily to changes in cell temperature and irradiance level. As a result, array loads such as direct-current to alternating-current power conditioners must be able to accommodate widely varying input levels, while maintaining operation at or near the array maximum power point.The results of an extensive computer simulation study that was used to define the parameters necessary for the systematic design of array/power-conditioner interfaces are presented as normalized ratios of power-conditioner parameters to array parameters, to make the results universally applicable to a wide variety of system sizes, sites, and operating modes. The advantages of maximum power tracking and a technique for computing average annual power-conditioner efficiency are discussed.

Commissioning a passive-scattering proton therapy nozzle for accurate SOBP delivery

PubMed Central

Engelsman, M.; Lu, H.-M.; Herrup, D.; Bussiere, M.; Kooy, H. M.

2009-01-01

Proton radiotherapy centers that currently use passively scattered proton beams do field specific calibrations for a non-negligible fraction of treatment fields, which is time and resource consuming. Our improved understanding of the passive scattering mode of the IBA universal nozzle, especially of the current modulation function, allowed us to re-commission our treatment control system for accurate delivery of SOBPs of any range and modulation, and to predict the output for each of these fields. We moved away from individual field calibrations to a state where continued quality assurance of SOBP field delivery is ensured by limited system-wide measurements that only require one hour per week. This manuscript reports on a protocol for generation of desired SOBPs and prediction of dose output. PMID:19610306

A Suggested Project to Develop EFL Teaching in the Egyptian Universities in the Light of Knowledge Economy Investing in ELT Innovation

ERIC Educational Resources Information Center

Ghoneim, Nahed Mohammed Mahmoud; Elghotmy, Heba Elsayed Abdelsalam

2016-01-01

Knowledge Investment is a new and unique concept. Converting the output of scientific research into reality requires a promising start-up. Knowledge economy should be given the priority it deserves and be considered one of the strategic objectives of the development plans in Egypt. With English increasingly being positioned as the pre-eminent…

Elucidating Dynamical Processes Relevant to Flow Encountering Abrupt Topography (FLEAT)

DTIC Science & Technology

2015-09-30

Encountering Abrupt Topography (FLEAT) Bo Qiu Dept of Oceanography, University of Hawaii at Manoa 1000 Pope Rd. Honolulu, HI 96822 phone: (808) 956...c) to explore relevant dynamics by using both simplified models and OGCM output with realistic topography and surface boundary conditions...scale abyssal circulation, we propose to use the Hallberg Isopycnal Model (HIM). The HIM allows sloping isopycnals to interact with bottom topography

The Effect of Task Repetition on Fluency and Accuracy of EFL Saudi Female Learners' Oral Performance

ERIC Educational Resources Information Center

Gashan, Amani K.; Almohaisen, Fahad M.

2014-01-01

This study aimed to examine the effect of task repetition on foreign language output. Twenty eight Saudi female students in the Preparatory Year (PY) at King Saud university, were randomly selected to conduct an oral information-gap task. The participants were asked to perform the task two times with two-week interval between the two performances.…

Salient Feature Selection Using Feed-Forward Neural Networks and Signal-to-Noise Ratios with a Focus Toward Network Threat Detection and Classification

DTIC Science & Technology

2014-03-27

0.8.0. The virtual machine’s network adapter was set to internal network only to keep any outside traffic from interfering. A MySQL -based query...primary output of Fullstats is the ARFF file format, intended for use with the WEKA Java -based data mining software developed at the University of Waikato

Supply and Demand Balances of Selected College-Level Fields Projected for the SREB [Southern Regional Education Board] States.

ERIC Educational Resources Information Center

Engels, Richard A.; Galambos, Eva C.

Few manpower projects in Southern states have focused on the demand for the output of four-year colleges and universities. Even fewer have attempted to link projections of demand for degree programs to the supply of graduates generated by those programs. Moreover, none have set the state outlook for a particular college-trained skill within a…

Horizons, Not Boundaries, Are the Language of Retirement: Sense of Fulfillment, Fears, and Life Trajectories of Faculty Extendees in the Philippines

ERIC Educational Resources Information Center

de Guzman, Allan B.; Llantino, Monica Lou S.; See, Viva Celina L.; Villanueva, Ria Faye P.; Jung, Yoomi

2008-01-01

This qualitative study probed into (a) the sense of fulfillment, (b) fears and anxieties, and (c) life trajectories of aged working professors recruited from one comprehensive university in the Philippines. Interestingly, findings of the study reveal that respondents were fulfilled and felt successful through the life outputs of their students;…

Photonic Applications Using Electrooptic Optical Signal Processors

DTIC Science & Technology

2011-11-16

analog-to-digital conversion using a continuous wave multiwavelength source and phase modulation Author(s): Bortnik, B.J.; Fetterman, H.R. Source... multiwavelength source and phase modulation Bartosz J. Bortnik* and Harold R. Fetterman Department of Electrical Engineering, University of California Los...utilizing a cw multiwavelength source and phase modulation instead of a mode-locked laser is presented. The output of the cw multiwave- length source

Grid-Parity Solar Power for Department of Defense Installations

DTIC Science & Technology

2014-02-01

MW DC. Installed capacity of panels. Capacity of 1 MW DC. Capacity = 998.4 kWp DC. Photovoltaic Peak Capacity ( Power Delivered). PVSyst... Photovoltaic Annual Output ( Power Delivered) The power delivered to Camp Roberts should match or exceed results simulated using the University of Geneva...FINAL REPORT Grid-Parity Solar Power for Department of Defense Installations ESTCP Project EW-201134 FEBRUARY 2014 John Bender

Hyperion 5113/GP Infrasound Sensor Evaluation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merchant, Bion J.

2015-08-01

Sandia National Laboratories has tested and evaluated an infrasound sensor, the 5113/GP manufactured by Hyperion. These infrasound sensors measure pressure output by a methodology developed by the University of Mississippi. The purpose of the infrasound sensor evaluation was to determine a measured sensitivity, transfer function, power, self-noise, dynamic range, and seismic sensitivity. These sensors are being evaluated prior to deployment by the U.S. Air Force.

Assessing Climate Change Impacts on Water Allocation in Karkheh River Basin

NASA Astrophysics Data System (ADS)

Davtalabsabet, R.; Madani, K.; Massah, A.; Farajzadeh, M.

2013-12-01

Rahman Davtalab1, 2, Kaveh Madani2, Alireza Massah3, Manouchehr Farajzadeh1 1Department of Geography, Tarbiat Modares University, Tehran, Iran 2Department of Civil, Environmental and Construction Engineering, University of Central Florida, Orlando, FL 32816, USA 3Department of Irrigation and Drainage Engineering, College of Abureyhan , University of Tehran, Iran Abstract Karkheh river basin, with an area of 50,000 km2 is located, in southwest Iran. This basin supplies water for major agricultural activities and large hydropower production in five Iranian provinces with the total population of four million people. Due to development and population growth, this large trans-boundary basin is incapable of meeting the water demands of the five riparian provinces, causing water allocation conflicts in the region. The situation has been exacerbated by the frequent droughts and is expected to worsen further by climate change. This study evaluates the impacts of climate change on water supply reliability and allocation in this basin. First, outputs of several General Circulation Models (GCMs) under different emission scenarios for different future time horizons are statistically downscaled. Then multiple river flow time series (RFTS) are generated by feeding GCM outputs into a HEC-HMS model, using the Soil Moisture Accounting (SMA). Given a wide range of variations in GCM outputs and the resulting RFTS, the Ward's method is used to identity different RFTS clusters. Clustering helps with increasing the ability of the modeler to test a range of possible future conditions while reducing the redundancies in input data. Karkheh river basin's ability to meet the growing demand under decreasing flows is evaluated for each RFTS cluster representative. Results indicate that Karkheh river flow might decrease by 50% toward the end of the century. This would decrease the reliability of agricultural water deliveries from 78-95% to less than 50%. While currently hydropower dams can only use 50% of their generation capacity for electricity production due to limited water availability, this figure would reduce to less than 30% with climate change. Several adaptation strategies are suggested based on the findings to minimize the economic losses of climate change in this developing basin.

Type 2 Diabetes Research Yield, 1951-2012: Bibliometrics Analysis and Density-Equalizing Mapping

PubMed Central

Geaney, Fiona; Scutaru, Cristian; Kelly, Clare; Glynn, Ronan W.; Perry, Ivan J.

2015-01-01

The objective of this paper is to provide a detailed evaluation of type 2 diabetes mellitus research output from 1951-2012, using large-scale data analysis, bibliometric indicators and density-equalizing mapping. Data were retrieved from the Science Citation Index Expanded database, one of the seven curated databases within Web of Science. Using Boolean operators "OR", "AND" and "NOT", a search strategy was developed to estimate the total number of published items. Only studies with an English abstract were eligible. Type 1 diabetes and gestational diabetes items were excluded. Specific software developed for the database analysed the data. Information including titles, authors’ affiliations and publication years were extracted from all files and exported to excel. Density-equalizing mapping was conducted as described by Groenberg-Kloft et al, 2008. A total of 24,783 items were published and cited 476,002 times. The greatest number of outputs were published in 2010 (n=2,139). The United States contributed 28.8% to the overall output, followed by the United Kingdom (8.2%) and Japan (7.7%). Bilateral cooperation was most common between the United States and United Kingdom (n=237). Harvard University produced 2% of all publications, followed by the University of California (1.1%). The leading journals were Diabetes, Diabetologia and Diabetes Care and they contributed 9.3%, 7.3% and 4.0% of the research yield, respectively. In conclusion, the volume of research is rising in parallel with the increasing global burden of disease due to type 2 diabetes mellitus. Bibliometrics analysis provides useful information to scientists and funding agencies involved in the development and implementation of research strategies to address global health issues. PMID:26208117

Education, philosophy and academic practice: nursing studies in the posthistorical university.

PubMed

Rolfe, Gary; Gardner, Lyn

2006-12-01

This paper is an amended and abridged version of a seminar given at the NET/NEP 1st Nurse Education International Conference in Vancouver, Canada. The topic of the paper arose from our growing concerns about the state of nurse education and its position in the university at the start of the twenty-first century. We share the fears expressed by Readings that the university has lost its way and is increasingly driven by a business agenda and a quest for ever-greater efficiency. Our biggest concern is with the impact that the so-called 'posthistorical university' is having on the study of nursing, particularly the growing pressure on nurse academics to focus their attention and energy on output at the expense of process, and on research at the expense of practice and practitioner development. We suggest that the solution might lie with Jean-Francois Lyotard's notion of postmodern philosophy as a way of opening up debate and, in his words, saving the honour of thinking.

Are scientific research outputs aligned with national policy makers' priorities? A case study of tuberculosis in Cambodia.

PubMed

Boudarene, Lydia; James, Richard; Coker, Richard; Khan, Mishal S

2017-10-01

With funding for tuberculosis (TB) research decreasing, and the high global disease burden persisting, there are calls for increased investment in TB research. However, justification of such investments is questionable, when translation of research outputs into policy and health care improvements remains a challenge for TB and other diseases. Using TB in Cambodia as a case study, we investigate how evidence needs of national policy makers are addressed by topics covered in research publications. We first conducted a systematic review to compile all studies on TB in Cambodia published since 2000. We then identified priority areas in which evidence for policy and programme planning are required from the perspective of key national TB control stakeholders. Finally, results from the literature review were analysed in relation to the priority research areas for national policy makers to assess overlap and highlight gaps in evidence. Priority research areas were: TB-HIV co-infection; childhood TB; multidrug resistant TB (MDR-TB); and universal and equitable access to quality diagnosis and treatment. On screening 1687 unique papers retrieved from our literature search, 253 were eligible publications focusing on TB in Cambodia. Of these, only 73 (29%) addressed one of the four priority research areas. Overall, 30 (11%), five (2%), seven (2%) and 37 (14%) studies reported findings relevant to TB-HIV, childhood TB, MDR-TB and access to quality diagnosis and treatment respectively. Our analysis shows that a small proportion of the research outputs in Cambodia address priority areas for informing policy and programme planning. This case study illustrates that there is substantial room for improvement in alignment between research outputs and evidence gaps that national policy makers would like to see addressed; better coordination between researchers, funders and policy makers' on identifying priority research topics may increase the relevance of research findings to health policies and programmes. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Scientific Production of Medical Universities in the West of Iran: a Scientometric Analysis

PubMed Central

Rasolabadi, Masoud; Khaledi, Shahnaz; Khayati, Fariba; Kalhor, Marya Maryam; Penjvini, Susan; Gharib, Alireza

2015-01-01

Introduction: This study aimed to compare scientific production by providing quantitative evaluation of science output in five Western Iranian Medical Universities including Hamedan, Ilam, Kermanshah, Kurdistan and Lorestan University of Medical Sciences using scientometrics indicators based on data indexed in Scopus for period between the years 2010 to 2014. Methods: In this scientometric study data were collected using Scopus database. Both searching and analyzing features of Scopus were used to data retrieval and analysis. We used Scientometrics indicators including number of publications, number of citations, nationalization index (NI), Internationalization Index (INI), H-index, average number of citations per paper, and growth index. Results: Five Western Iranian Universities produced over 3011 articles from 2010 to 2014. These articles were cited 7158 times with an average rate of 4.2 citations per article. H- Index of under study universities are varying from 14 to 30. Ilam University of Medical Sciences had the highest international collaboration with an INI of 0.33 compared to Hamedan and Kermanshah universities with INI of 0.20 and 0.16 respectively. The lowest international collaboration belonged to Lorestan University of Medical Sciences (0.07). The highest Growth Index belonged to Kurdistan University of Medical Sciences (69.7). Conclusion: Although scientific production of five Western Iranian Medical Universities was increasing, but this trend was not stable. To achieve better performance it is recommended that five Western Iranian Universities stabilize their budgeting and investment policies in research. PMID:26483592

The Scientific Research Output of U.S. Research Universities, 1980-2010: Continuing Dispersion, Increasing Concentration, or Stable Inequality?

ERIC Educational Resources Information Center

Brint, Steven; Carr, Cynthia E.

2017-01-01

Extending and expanding Geiger and Feller's (1995) analysis of increasing dispersion in R&D expenditures during the 1980s, the paper analyzes publication and citation counts as well as R&D expenditures for 194 top producers using Web of Science data. We find high and stable levels of inequality in the 1990s and 2000s, combined with robust…

Appropriate Measures and Consistent Standard for High Energy Laser Beam Quality (Postprint)

DTIC Science & Technology

2006-08-01

another. a We follow the 99% criteria [ Siegman , Lasers , chapter 17.1] which corresponds to a... Siegman , “ Lasers ” University Science Books, 1986. • A.E. Siegman , “New developments in laser resonators”, SPIE Vol. 1224, Optical Resonators, 1990...pp. 1-14. • Anthony E. Siegman & Steven W. Townsend, “Output Beam Propagation and Beam Quality from a Multimode Stable-Cavity Laser ”, IEEE Journal

Synapses that Compute Motion.

DTIC Science & Technology

1987-06-01

direction- - the null direction-yields no response. In 1964, Horace Barlow and Bill Levick , working at the University of California at Berkeley, found...only output of the retina. Since Barlow and Levick used the so-called extracellular recording technique, that is the electrode recording the...two slits, placed close to each other. Barlow and Levick first measured the response of the cell when each bar was turned on and off in isolation

Cardiovascular Adaptation to Stress

DTIC Science & Technology

1979-05-01

sympathetic activity, suited in a proportionately larger increase in cardiac The concept that the background level of sympathetic output than arterial...simultaneously be reduced during disten- hypoxia. flow autoregulation occurred. In these con- sion. This concept is supported by the work of Levy et al. scious...of Pharmacology, University of Texa Healh Science Center, San Antonio, Texas 78284 S’rm r, H. 0., D. F. PlTERSON, AND V. S. BISHOP. Car- their

What Are Altmetrics? Are They Important? | Poster

Cancer.gov

Altmetrics, also known as alternative metrics, offer a way to gauge the attention that research output (such as articles, data sets, program code, slide decks, and posters) is generating on social media, reference sharing sites (such as Mendeley), blogs, and other online media.? The term “altmetrics” was coined on Twitter in 2010 by Jason Priem, then a graduate student at the University of North Carolina’s School of Information and Library...

Factors Inhibiting Application for Financial Aid by Low-Income Students at the University of Hawaii at Manoa

ERIC Educational Resources Information Center

Lee, Karen C.

2010-01-01

Today's expanding global society has caused changes in the needs of the workforce as well as the level of skills and education required by various jobs across the United States. While the number of jobs demanding a post-secondary degree increase, the U.S. output of college graduates has not kept pace. A previous leader in secondary and tertiary…

Management Research Center Report To The External Degree Planning Consortium Of The Policy Institute, SURC On Identification Of Learning Materials.

ERIC Educational Resources Information Center

Fisk, George; Nehmadi, David

A system has been developed to identify, locate and evaluate learning materials for use in an external degree program in management at Syracuse University. It consists of five elements, each of which is a set of physical objects or documents: the interaction of these sets transforms the demand for learning materials into an output of retrieved…

Closeout Report Department of Energy Grant DE-FG02 95ER40931 Advanced Map Methods for the Description of Particle Beam Dynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin Berz; Kyoko Makino

The above grant was active at Michigan State University from 1994 until 2007. We summarize and document the various activities and key output under the grant, including degrees awarded to graduate students at MSU and through the VUBeam program sponsored by the grant, the books, publications and reports produced, the meetings organized, and the presentations given.

Matching Higher Education with the Labour Market in the Knowledge Economy: The Much-Needed Reform of University Governance in Italy

ERIC Educational Resources Information Center

Tavoletti, Ernesto

2010-01-01

It is argued that in the knowledge economy and in the context of the current restrictions on public finance, matching the output of higher education with the needs of the labour market is not simply one of many key issues for policy makers addressing the sustainability of higher education: it is "the" issue. As the sources of funding for…

Midwest Consortium for Wind Turbine Reliability and Optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scott R. Dana; Douglas E. Adams; Noah J. Myrent

2012-05-11

This report provides an overview of the efforts aimed to establish a student focused laboratory apparatus that will enhance Purdue's ability to recruit and train students in topics related to the dynamics, operations and economics of wind turbines. The project also aims to facilitate outreach to students at Purdue and in grades K-12 in the State of Indiana by sharing wind turbine operational data. For this project, a portable wind turbine test apparatus was developed and fabricated utilizing an AirX 400W wind energy converter. This turbine and test apparatus was outfitted with an array of sensors used to monitor windmore » speed, turbine rotor speed, power output and the tower structural dynamics. A major portion of this project included the development of a data logging program used to display real-time sensor data and the recording and creation of output files for data post-processing. The apparatus was tested in an open field to subject the turbine to typical operating conditions and the data acquisition system was adjusted to obtain desired functionality to facilitate use for student projects in existing courses offered at Purdue University and Indiana University. Data collected using the data logging program is analyzed and presented to demonstrate the usefulness of the test apparatus related to wind turbine dynamics and operations.« less

A Universal Intelligent System-on-Chip Based Sensor Interface

PubMed Central

Mattoli, Virgilio; Mondini, Alessio; Mazzolai, Barbara; Ferri, Gabriele; Dario, Paolo

2010-01-01

The need for real-time/reliable/low-maintenance distributed monitoring systems, e.g., wireless sensor networks, has been becoming more and more evident in many applications in the environmental, agro-alimentary, medical, and industrial fields. The growing interest in technologies related to sensors is an important indicator of these new needs. The design and the realization of complex and/or distributed monitoring systems is often difficult due to the multitude of different electronic interfaces presented by the sensors available on the market. To address these issues the authors propose the concept of a Universal Intelligent Sensor Interface (UISI), a new low-cost system based on a single commercial chip able to convert a generic transducer into an intelligent sensor with multiple standardized interfaces. The device presented offers a flexible analog and/or digital front-end, able to interface different transducer typologies (such as conditioned, unconditioned, resistive, current output, capacitive and digital transducers). The device also provides enhanced processing and storage capabilities, as well as a configurable multi-standard output interface (including plug-and-play interface based on IEEE 1451.3). In this work the general concept of UISI and the design of reconfigurable hardware are presented, together with experimental test results validating the proposed device. PMID:22163624

Neurology Research in Saudi Arabia: Urgent call for action.

PubMed

Algahtani, Hussein; Shirah, Bader; Boker, Faisal; Algamdi, Albaraa; Alkahtani, Abdulah

2017-08-01

Research activities in Saudi Arabia are promoted at the governmental and institutional levels. However, the output and quality of research conducted in the field of neurology has not yet been measured quantitatively. This study therefore aimed to analyse neurology-related publications from Saudi Arabia. This study was conducted in January 2016. A systematic search using the PubMed ® search engine (National Library of Medicine, Bethesda, Maryland, USA) was conducted to identify all neurology-related articles published from Saudi Arabia between January 1996 and December 2015. A total of 1,292 neurology-related publications were identified. Neurology research increased linearly with time, with most publications originating from Riyadh (67%) and the university sector (≈47%). However, most neurology-related articles were published in journals which had an impact factor of <1 (55%). Neurology research in Saudi Arabia has increased substantially over the last 20 years. However, as most articles were published in low-impact journals, the quality of research remains inadequate and should be improved. It is important that an official research culture be established in both governmental and private universities as well as colleges and health institutions in Saudi Arabia. The formation of clinical academic departments staffed by research experts is recommended to ensure the quality of neurology research output.

User manual for semi-circular compact range reflector code: Version 2

NASA Technical Reports Server (NTRS)

Gupta, Inder J.; Burnside, Walter D.

1987-01-01

A computer code has been developed at the Ohio State University ElectroScience Laboratory to analyze a semi-circular paraboloidal reflector with or without a rolled edge at the top and a skirt at the bottom. The code can be used to compute the total near field of the reflector or its individual components at a given distance from the center of the paraboloid. The code computes the fields along a radial, horizontal, vertical or axial cut at that distance. Thus, it is very effective in computing the size of the sweet spot for a semi-circular compact range reflector. This report describes the operation of the code. Various input and output statements are explained. Some results obtained using the computer code are presented to illustrate the code's capability as well as being samples of input/output sets.

Studies of The Durability of Belt Conveyor Idlers with Working Loads Taken into Account

NASA Astrophysics Data System (ADS)

Król, Robert

2017-12-01

The results of laboratory and operational studies conducted in the Machinery Systems Division of Wroclaw University of Technology in recent years have became the basis for selecting proper belt conveyor roller designs optimized for specific strength and operational criteria. The usefulness of the results for assessing the energy intensity of idlers, estimating their durability and determining modernization policies has been confirmed. Methods of estimating the durability of carrying idlers on the basis of the identified output stream distributions are presented. Results of studies carried out using an analytical method and a laboratory method are reported. It has been shown that the operational durability of a roller is determined by its design, the roller set parameters (the spacing and the angle of bevel) and the operating conditions having a bearing on the irregularity of the transported output stream.

The librarian as research informationist: a case study.

PubMed

Federer, Lisa

2013-10-01

How can an embedded research informationist add value to the scientific output of research teams? The University of California-Los Angeles (UCLA) Louise M. Darling Biomedical Library is an academic health sciences library serving the clinical, educational, and research needs of the UCLA community. A grant from the National Library of Medicine funded a librarian to join a UCLA research team as an informationist. The informationist meets regularly with the research team and provides guidance related to data management, preservation, and other information-related issues. Early results suggest that the informationist's involvement has influenced the team's data gathering, storage, and curation methods. The UCLA Library has also changed the librarian's title to research informationist to reflect the new activities that she performs. The research informationist role provides an opportunity for librarians to become effective members of research teams and improve research output.

Institutional Alliances to Reduce Cancer Disparities in Chicago

PubMed Central

Simon, Melissa A.; Malin, Emily L.; Hitsman, Brian L.; Ciecierski, Christina C.; Victorson, David E.; Banas, Jennifer R.; Stuart, Moira; Luedke, Tracy; Cella, David

2017-01-01

A partnership formed between Northeastern Illinois University (NEIU) and the Robert H. Lurie Comprehensive Cancer Center of Northwestern University sought to address well-documented cancer health disparities in Chicago by developing a collaborative research, training, and educational infrastructure between a minority-serving institution and a National Cancer Institute designated comprehensive cancer center. With a critical examination of partnership documentation and outputs, we describe the partnership’s community-engaged approaches, challenges, and lessons learned. Northeastern Illinois University and the Lurie Cancer Center engaged in a yearlong partnership-building phase, identified interdisciplinary research teams, formed a governance structure, and identified collective aims. Partnership outcomes included funded inter-institutional research projects, new curriculum, and an annual research trainee program. Significant challenges faced included uncertain fiscal climate, widespread turnover, and dissimilar institutional demands. Lessons learned from this minority serving institution and comprehensive cancer center partnership may be useful for bridging distinct academic communities in the pursuit of ameliorating health disparities. PMID:27763461

Technology Commercialization Effects on the Conduct of Research in Higher Education

PubMed Central

Powers, Joshua B.; Campbell, Eric G.

2012-01-01

The objective of this study was to investigate the effects of technology commercialization on researcher practice and productivity at U.S. universities. Using data drawn from licensing contract documents and databases of university-industry linkages and faculty research output, the study findings suggest that the common practice of licensing technologies exclusively to singular firms may have a dampening effect on faculty inventor propensity to conduct published research and to collaborate with others on research. Furthermore, faculty who are more actively engaged in patenting may be less likely to collaborate with outsiders on research while faculty at public universities may experience particularly strong norms to engage in commercialization vis-à-vis traditional routes to research dissemination. These circumstances appear to be hindering innovation via the traditional mechanisms (research publication and collaboration), questioning the success of policymaking to date for the purpose of speeding the movement of research from the lab bench to society. PMID:22427717

High density, multi-range analog output Versa Module Europa board for control system applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Kundan, E-mail: kundan@iuac.res.in; Das, Ajit Lal

2014-01-15

A new VMEDAC64, 12-bit 64 channel digital-to-analog converter, a Versa Module Europa (VME) module, features 64 analog voltage outputs with user selectable multiple ranges, has been developed for control system applications at Inter University Accelerator Centre. The FPGA (Field Programmable Gate Array) is the module's core, i.e., it implements the DAC control logic and complexity of VMEbus slave interface logic. The VMEbus slave interface and DAC control logic are completely designed and implemented on a single FPGA chip to achieve high density of 64 channels in a single width VME module and will reduce the module count in the controlmore » system applications, and hence will reduce the power consumption and cost of overall system. One of our early design goals was to develop the VME interface such that it can be easily integrated with the peripheral devices and satisfy the timing specifications of VME standard. The modular design of this module reduces the amount of time required to develop other custom modules for control system. The VME slave interface is written as a single component inside FPGA which will be used as a basic building block for any VMEbus interface project. The module offers multiple output voltage ranges depending upon the requirement. The output voltage range can be reduced or expanded by writing range selection bits in the control register. The module has programmable refresh rate and by default hold capacitors in the sample and hold circuit for each channel are charged periodically every 7.040 ms (i.e., update frequency 284 Hz). Each channel has software controlled output switch which disconnects analog output from the field. The modularity in the firmware design on FPGA makes the debugging very easy. On-board DC/DC converters are incorporated for isolated power supply for the analog section of the board.« less

Improved methods in neural network-based adaptive output feedback control, with applications to flight control

NASA Astrophysics Data System (ADS)

Kim, Nakwan

Utilizing the universal approximation property of neural networks, we develop several novel approaches to neural network-based adaptive output feedback control of nonlinear systems, and illustrate these approaches for several flight control applications. In particular, we address the problem of non-affine systems and eliminate the fixed point assumption present in earlier work. All of the stability proofs are carried out in a form that eliminates an algebraic loop in the neural network implementation. An approximate input/output feedback linearizing controller is augmented with a neural network using input/output sequences of the uncertain system. These approaches permit adaptation to both parametric uncertainty and unmodeled dynamics. All physical systems also have control position and rate limits, which may either deteriorate performance or cause instability for a sufficiently high control bandwidth. Here we apply a method for protecting an adaptive process from the effects of input saturation and time delays, known as "pseudo control hedging". This method was originally developed for the state feedback case, and we provide a stability analysis that extends its domain of applicability to the case of output feedback. The approach is illustrated by the design of a pitch-attitude flight control system for a linearized model of an R-50 experimental helicopter, and by the design of a pitch-rate control system for a 58-state model of a flexible aircraft consisting of rigid body dynamics coupled with actuator and flexible modes. A new approach to augmentation of an existing linear controller is introduced. It is especially useful when there is limited information concerning the plant model, and the existing controller. The approach is applied to the design of an adaptive autopilot for a guided munition. Design of a neural network adaptive control that ensures asymptotically stable tracking performance is also addressed.

Output factor determination for dose measurements in axial and perpendicular planes using a silicon strip detector

NASA Astrophysics Data System (ADS)

Abou-Haïdar, Z.; Bocci, A.; Alvarez, M. A. G.; Espino, J. M.; Gallardo, M. I.; Cortés-Giraldo, M. A.; Ovejero, M. C.; Quesada, J. M.; Arráns, R.; Prieto, M. Ruiz; Vega-Leal, A. Pérez; Nieto, F. J. Pérez

2012-04-01

In this work we present the output factor measurements of a clinical linear accelerator using a silicon strip detector coupled to a new system for complex radiation therapy treatment verification. The objective of these measurements is to validate the system we built for treatment verification. The measurements were performed at the Virgin Macarena University Hospital in Seville. Irradiations were carried out with a Siemens ONCOR™ linac used to deliver radiotherapy treatment for cancer patients. The linac was operating in 6 MV photon mode; the different sizes of the fields were defined with the collimation system provided within the accelerator head. The output factor was measured with the silicon strip detector in two different layouts using two phantoms. In the first, the active area of the detector was placed perpendicular to the beam axis. In the second, the innovation consisted of a cylindrical phantom where the detector was placed in an axial plane with respect to the beam. The measured data were compared with data given by a commercial treatment planning system. Results were shown to be in a very good agreement between the compared set of data.

Systems-based accident analysis in the led outdoor activity domain: application and evaluation of a risk management framework.

PubMed

Salmon, P; Williamson, A; Lenné, M; Mitsopoulos-Rubens, E; Rudin-Brown, C M

2010-08-01

Safety-compromising accidents occur regularly in the led outdoor activity domain. Formal accident analysis is an accepted means of understanding such events and improving safety. Despite this, there remains no universally accepted framework for collecting and analysing accident data in the led outdoor activity domain. This article presents an application of Rasmussen's risk management framework to the analysis of the Lyme Bay sea canoeing incident. This involved the development of an Accimap, the outputs of which were used to evaluate seven predictions made by the framework. The Accimap output was also compared to an analysis using an existing model from the led outdoor activity domain. In conclusion, the Accimap output was found to be more comprehensive and supported all seven of the risk management framework's predictions, suggesting that it shows promise as a theoretically underpinned approach for analysing, and learning from, accidents in the led outdoor activity domain. STATEMENT OF RELEVANCE: Accidents represent a significant problem within the led outdoor activity domain. This article presents an evaluation of a risk management framework that can be used to understand such accidents and to inform the development of accident countermeasures and mitigation strategies for the led outdoor activity domain.

Weighted reciprocal of temperature, weighted thermal flux, and their applications in finite-time thermodynamics.

PubMed

Sheng, Shiqi; Tu, Z C

2014-01-01

The concepts of weighted reciprocal of temperature and weighted thermal flux are proposed for a heat engine operating between two heat baths and outputting mechanical work. With the aid of these two concepts, the generalized thermodynamic fluxes and forces can be expressed in a consistent way within the framework of irreversible thermodynamics. Then the efficiency at maximum power output for a heat engine, one of key topics in finite-time thermodynamics, is investigated on the basis of a generic model under the tight-coupling condition. The corresponding results have the same forms as those of low-dissipation heat engines [ M. Esposito, R. Kawai, K. Lindenberg and C. Van den Broeck Phys. Rev. Lett. 105 150603 (2010)]. The mappings from two kinds of typical heat engines, such as the low-dissipation heat engine and the Feynman ratchet, into the present generic model are constructed. The universal efficiency at maximum power output up to the quadratic order is found to be valid for a heat engine coupled symmetrically and tightly with two baths. The concepts of weighted reciprocal of temperature and weighted thermal flux are also transplanted to the optimization of refrigerators.

Improved Soil Erosion and Sediment Transport in GSSHA

DTIC Science & Technology

2010-08-01

the USLE soil erodibility factor (0-1), soil cropping factor (0-1) and conservation factor (0-1) in the development by Julien (1995). The use of one...factor K represents a departure from Julien (1995), who used all three factors from the Universal Soil Loss Equation ( USLE ). This departure is justi...runoff using a research-quality data set. BACKGROUND: GSSHA simulates overland soil erosion and outputs erosion and deposition for any size class of

Insect Optic Glomeruli-Exploration of a Universal Circuit for Sensorimotor Processing

DTIC Science & Technology

2011-01-25

09 to 2-28-10. We have successfully achieved the first recordings from any laboratory of the small palisade output neurons from the lobula of...glomeruli. Using infrared illumination and optics, the cell bodies of such clones are directly observed. A patch clamp recording electrode, filled...neuron and electrolyte of the electrode has been established, the cell is recorded during the presentation of a sequence of visual stimuli: stripes

Fully Burdened Cost of Fuel Using Input-Output Analysis

DTIC Science & Technology

2011-12-01

Distribution Model could be used to replace the current seven-step Fully Burdened Cost of Fuel process with a single step, allowing for less complex and...wide extension of the Bulk Fuels Distribution Model could be used to replace the current seven-step Fully Burdened Cost of Fuel process with a single...ABBREVIATIONS AEM Atlantic, Europe, and the Mediterranean AOAs Analysis of Alternatives DAG Defense Acquisition Guidebook DAU Defense Acquisition University

Effects of Computer-Based Simulations Teaching Approach on Students' Achievement in the Learning of Chemistry among Secondary School Students in Nakuru Sub County, Kenya

ERIC Educational Resources Information Center

Mihindo, W. Jane; Wachanga, S.W.; Anditi, Z. O.

2017-01-01

Science education should help develop student's interest in science as today's society depends largely on output of science and technology. Chemistry is one of the branches of science. Chemistry education helps to expand the pupil's knowledge of the universe and of his/her position in it. It helps in the appreciation and enjoyment of nature and…

Reusable Software Component Retrieval via Normalized Algebraic Specifications

DTIC Science & Technology

1991-12-01

outputs. In fact, this method of query is simpler for matching since it relieves the system from the burden of generating a test set. Eichmann [Eich9l...September 1991. [Eich9l] Eichmann , David A., "Selecting Reusable Components Using Algebraic Specifications", Proceedings of the Second International...Technology Atlanta, Georgia 30332-0800 12. Dr. David Eichmann 1 Department of Statistics and Computer Science Knapp Hall West Virginia University Morgantown, West Virginia 26506 226

Process Guide for the Domain-Specific Software Architectures (DSSA) Process Life Cycle

DTIC Science & Technology

1993-12-01

of box "Things" used and transformed by activities Output Right side of box...Carnegie Mellon University is required not to chsc’lmirate in admission. employment or administration of its programs on the oasis of race. color...natonal Origin sex of hanoicap ,:zlaon of Tit!e VI of.the C~vii RAgtts A - of 964 Tile ’X of ’he Educationai Amendments of 1972 and Sectlon 504 of

An Algebraic Approach to Inference in Complex Networked Structures

DTIC Science & Technology

2015-07-09

44], [45],[46] where the shift is the elementary non-trivial filter that generates, under an appropriate notion of shift invariance, all linear ... elementary filter, and its output is a graph signal with the value at vertex n of the graph given approximately by a weighted linear combination of...AFRL-AFOSR-VA-TR-2015-0265 An Algebraic Approach to Inference in Complex Networked Structures Jose Moura CARNEGIE MELLON UNIVERSITY Final Report 07

A RESTful API for Exchanging Materials Data in the AFLOWLIB.org Consortium

DTIC Science & Technology

2014-03-12

of North Texas, Denton TX 4Materials Science, Electrical Engineering, Physics and Chemistry, Duke University, Durham NC, 27708 †On leave from the...software tools, input and output data are maintained remotely, lowering cost, improving ecological sustainability (saving electricity ) and increas- ing...enthalpy_formation_atom) – Description. Returns the formation enthalpy ∆HF per unit cell (∆HF atomic per atom). For compounds ANABNB · · · with NA + NB

Exploring Social Meaning in Online Bilingual Text through Social Network Analysis

DTIC Science & Technology

2015-09-01

p. 1). 30 GATE development began in 1995. As techniques for natural language processing ( NLP ) are investigated by the research community and...become part of the NLP repetoire, developers incorporate them with wrappers, which allow the output from GATE processes to be recognized as input by...University NEE Named Entity Extraction NLP natural language processing OSD Office of the Secretary of Defense POS parts of speech SBIR Small Business

On the advancement of highly cited research in China: An analysis of the Highly Cited database.

PubMed

Li, John Tianci

2018-01-01

This study investigates the progress of highly cited research in China from 2001 to 2016 through the analysis of the Highly Cited database. The Highly Cited database, compiled by Clarivate Analytics, is comprised of the world's most influential researchers in the 22 Essential Science Indicator fields as catalogued by the Web of Science. The database is considered an international standard for the measurement of national and institutional highly cited research output. Overall, we found a consistent and substantial increase in Highly Cited Researchers from China during the timespan. The Chinese institutions with the most Highly Cited Researchers- the Chinese Academy of Sciences, Tsinghua University, Peking University, Zhejiang University, the University of Science and Technology of China, and BGI Shenzhen- are all top ten universities or primary government research institutions. Further evaluation of separate fields of research and government funding data from the National Natural Science Foundation of China revealed disproportionate growth efficiencies among the separate divisions of the National Natural Science Foundation. The most development occurred in the fields of Chemistry, Materials Sciences, and Engineering, whereas the least development occurred in Economics and Business, Health Sciences, and Life Sciences.

Enhancement of Health Research Capacity in Nigeria through North-South and In-Country Partnerships

PubMed Central

Olaleye, David O.; Odaibo, Georgina N.; Carney, Paula; Agbaji, Oche; Sagay, Atiene S.; Muktar, Haruna; Akinyinka, Olusegun O.; Omigbodun, Akinyinka O.; Ogunniyi, Adesola; Gashau, Wadzani; Akanmu, Sulaimon; Ogunsola, Folasade; Chukwuka, Chinwe; Okonkwo, Prosper I.; Meloni, Seema T.; Adewole, Isaac; Kanki, Phyllis J.; Murphy, Robert L.

2014-01-01

Research productivity in Sub-Saharan Africa has the potential to affect teaching, student quality, faculty career development, and translational country-relevant research as it has in developed countries. Nigeria is the most populous country in Africa, with an academic infrastructure that includes 129 universities and 45 medical schools; however, despite the size, the country has unacceptably poor health status indicators. To further develop the research infrastructure in Nigeria, faculty and research career development topics were identified within the six Nigerian universities of the nine institutions of the Medical Education Partnership Initiative in Nigeria (MEPIN) consortium. The consortium identified a training model that incorporated multi-institutional “train the trainers” programs at the University of Ibadan, followed by replication at the other MEPIN universities. More than 140 in-country trainers subsequently presented nine courses to more than 1,600 faculty, graduate students, and resident doctors throughout the consortium during the program’s first three years (2011–2013). This model has fostered a new era of collaboration among the major Nigerian research universities, which now have increased capacity for collaborative research initiatives and improved research output. These changes, in turn, have the potential to improve the nation’s health outcomes. PMID:25072590

Towards a universal description of cohesive-particle flows

NASA Astrophysics Data System (ADS)

Lamarche, Casey; Liu, Peiyuan; Kellogg, Kevin; Lattanzi, Aaron; Hrenya, Christine

2017-11-01

A universal framework for describing cohesive granular flows seems unattainable based on prior works, making a fundamental continuum theory to predict such flows appear unachievable. For the first time, universal behavior of cohesive-grain flows is demonstrated by linking the macroscopic (many-grain) behavior to grain-grain interactions via two dimensionless groups: a generalized Bond number BoG - ratio of maximum cohesive force to the force driving flow - and a new Agglomerate number Ag - ratio of critical cohesive energy to the granular energy. Cohesive-grain flow is investigated in several systems, and universal behavior is determined via collapse of a cohesion-dependent output variable from each system with the appropriate dimensionless group. Universal behavior is observed using BoG for dense (enduring-contact-dominated) flows and Ag for dilute (collision-dominated) flows, as BoG accounts for the cohesive contact force and Ag for increased collisional dissipation due to cohesion. Hence, a new physical picture is presented, namely, BoG dominates in dense flows, where force chains drive momentum transfer, and Ag dominates in dilute systems, where the dissipative collisions dominate momentum transfer. Apparent discrepancies with past treatments are resolved. Dow Corning Corporation.

The drivers of facility-based immunization performance and costs. An application to Moldova.

PubMed

Maceira, Daniel; Goguadze, Ketevan; Gotsadze, George

2015-05-07

This paper identifies factors that affect the cost and performance of the routine immunization program in Moldova through an analysis of facility-based data collected as part of a multi-country costing and financing study of routine immunization (EPIC). A nationally representative sample of health care facilities (50) was selected through multi-stage, stratified random sampling. Data on inputs, unit prices and facility outputs were collected during October 3rd 2012-January 14th 2013 using a pre-tested structured questionnaire. Ordinary least square (OLS) regression analysis was performed to determine factors affecting facility outputs (number of doses administered and fully immunized children) and explaining variation in total facility costs. The study found that the number of working hours, vaccine wastage rates, and whether or not a doctor worked at a facility (among other factors) were positively and significantly associated with output levels. In addition, the level of output, price of inputs and share of the population with university education were significantly associated with higher facility costs. A 1% increase in fully immunized child would increase total cost by 0.7%. Few costing studies of primary health care services in developing countries evaluate the drivers of performance and cost. This exercise attempted to fill this knowledge gap and helped to identify organizational and managerial factors at a primary care district and national level that could be addressed by improved program management aimed at improved performance. Copyright © 2015 Elsevier Ltd. All rights reserved.

Molecules, muscles, and machines: Universal performance characteristics of motors

PubMed Central

Marden, James H.; Allen, Lee R.

2002-01-01

Animal- and human-made motors vary widely in size and shape, are constructed of vastly different materials, use different mechanisms, and produce an enormous range of mass-specific power. Despite these differences, there is remarkable consistency in the maximum net force produced by broad classes of animal- and human-made motors. Motors that use force production to accomplish steady translational motion of a load (myosin, kinesin, dynein, and RNA polymerase molecules, muscle cells, whole muscles, winches, linear actuators, and rockets) have maximal force outputs that scale as the two-thirds power of mass, i.e., with cross-sectional area. Motors that use cyclical motion to generate force and are more subject to multiaxial stress and vibration have maximal force outputs that scale as a single isometric function of motor mass with mass-specific net force output averaging 57 N⋅kg−1 (SD = 14). Examples of this class of motors includes flying birds, bats, and insects, swimming fish, various taxa of running animals, piston engines, electric motors, and all types of jets. Dependence of force production and stress resistance on cross-sectional area is well known, but the isometric scaling and common upper limit of mass-specific force production by cyclical motion motors has not been recognized previously and is not explained by an existing body of theory. Remarkably, this finding indicates that most of the motors used by humans and animals for transportation have a common upper limit of mass-specific net force output that is independent of materials and mechanisms. PMID:11917097

Transesophageal Echocardiography, 3-Dimensional and Speckle Tracking Together as Sensitive Markers for Early Outcome in Patients With Left Ventricular Dysfunction Undergoing Cardiac Surgery.

PubMed

Kumar, Alok; Puri, Goverdhan Dutt; Bahl, Ajay

2017-10-01

Speckle tracking, when combined with 3-dimensional (3D) left ventricular ejection fraction, might prove to be a more sensitive marker for postoperative ventricular dysfunction. This study investigated early outcomes in a cohort of patients with left ventricular dysfunction undergoing cardiac surgery. Prospective, blinded, observational study. University hospital; single institution. The study comprised 73 adult patients with left ventricular ejection fraction <50% undergoing cardiac surgery using cardiopulmonary bypass. Routine transesophageal echocardiography before and after bypass. Global longitudinal strain using speckle tracking and 3D left ventricular ejection fraction were computed using transesophageal echocardiography. Mean prebypass global longitudinal strain and 3D left ventricle ejection fraction were significantly lower in patients with postoperative low-cardiac-output syndrome compared with patients who did not develop low cardiac output (global longitudinal strain -7.5% v -10.7% and 3D left ventricular ejection fraction 29% v 39%, respectively; p < 0.0001). The cut-off value of global longitudinal strain predicting postoperative low-cardiac-output syndrome was -6%, with 95% sensitivity and 68% specificity; and 3D left ventricular ejection fraction was 19% with 98% sensitivity and 81% specificity. Preoperative left ventricular global longitudinal strain (-6%) and 3D left ventricular ejection fraction (19%) together could act as predictor of postoperative low-cardiac-output states with high sensitivity (99.9%) in patients undergoing cardiac surgery. Copyright © 2017 Elsevier Inc. All rights reserved.

Molecules, muscles, and machines: universal performance characteristics of motors.

PubMed

Marden, James H; Allen, Lee R

2002-04-02

Animal- and human-made motors vary widely in size and shape, are constructed of vastly different materials, use different mechanisms, and produce an enormous range of mass-specific power. Despite these differences, there is remarkable consistency in the maximum net force produced by broad classes of animal- and human-made motors. Motors that use force production to accomplish steady translational motion of a load (myosin, kinesin, dynein, and RNA polymerase molecules, muscle cells, whole muscles, winches, linear actuators, and rockets) have maximal force outputs that scale as the two-thirds power of mass, i.e., with cross-sectional area. Motors that use cyclical motion to generate force and are more subject to multiaxial stress and vibration have maximal force outputs that scale as a single isometric function of motor mass with mass-specific net force output averaging 57 N x kg(-1) (SD = 14). Examples of this class of motors includes flying birds, bats, and insects, swimming fish, various taxa of running animals, piston engines, electric motors, and all types of jets. Dependence of force production and stress resistance on cross-sectional area is well known, but the isometric scaling and common upper limit of mass-specific force production by cyclical motion motors has not been recognized previously and is not explained by an existing body of theory. Remarkably, this finding indicates that most of the motors used by humans and animals for transportation have a common upper limit of mass-specific net force output that is independent of materials and mechanisms.

Analysis of quality control data of eight modern radiotherapy linear accelerators: the short- and long-term behaviours of the outputs and the reproducibility of quality control measurements

NASA Astrophysics Data System (ADS)

Kapanen, Mika; Tenhunen, Mikko; Hämäläinen, Tuomo; Sipilä, Petri; Parkkinen, Ritva; Järvinen, Hannu

2006-07-01

Quality control (QC) data of radiotherapy linear accelerators, collected by Helsinki University Central Hospital between the years 2000 and 2004, were analysed. The goal was to provide information for the evaluation and elaboration of QC of accelerator outputs and to propose a method for QC data analysis. Short- and long-term drifts in outputs were quantified by fitting empirical mathematical models to the QC measurements. Normally, long-term drifts were well (<=1%) modelled by either a straight line or a single-exponential function. A drift of 2% occurred in 18 ± 12 months. The shortest drift times of only 2-3 months were observed for some new accelerators just after the commissioning but they stabilized during the first 2-3 years. The short-term reproducibility and the long-term stability of local constancy checks, carried out with a sealed plane parallel ion chamber, were also estimated by fitting empirical models to the QC measurements. The reproducibility was 0.2-0.5% depending on the positioning practice of a device. Long-term instabilities of about 0.3%/month were observed for some checking devices. The reproducibility of local absorbed dose measurements was estimated to be about 0.5%. The proposed empirical model fitting of QC data facilitates the recognition of erroneous QC measurements and abnormal output behaviour, caused by malfunctions, offering a tool to improve dose control.

Hierarchical resilience with lightweight threads.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wheeler, Kyle Bruce

2011-10-01

This paper proposes methodology for providing robustness and resilience for a highly threaded distributed- and shared-memory environment based on well-defined inputs and outputs to lightweight tasks. These inputs and outputs form a failure 'barrier', allowing tasks to be restarted or duplicated as necessary. These barriers must be expanded based on task behavior, such as communication between tasks, but do not prohibit any given behavior. One of the trends in high-performance computing codes seems to be a trend toward self-contained functions that mimic functional programming. Software designers are trending toward a model of software design where their core functions are specifiedmore » in side-effect free or low-side-effect ways, wherein the inputs and outputs of the functions are well-defined. This provides the ability to copy the inputs to wherever they need to be - whether that's the other side of the PCI bus or the other side of the network - do work on that input using local memory, and then copy the outputs back (as needed). This design pattern is popular among new distributed threading environment designs. Such designs include the Barcelona STARS system, distributed OpenMP systems, the Habanero-C and Habanero-Java systems from Vivek Sarkar at Rice University, the HPX/ParalleX model from LSU, as well as our own Scalable Parallel Runtime effort (SPR) and the Trilinos stateless kernels. This design pattern is also shared by CUDA and several OpenMP extensions for GPU-type accelerators (e.g. the PGI OpenMP extensions).« less

SUstaiNability: a science communication website on environmental research

NASA Astrophysics Data System (ADS)

Gravina, Teresita; Muselli, Maurizio; Ligrone, Roberto; Rutigliano, Flora Angela

2017-08-01

Social networks enable anyone to publish potentially boundless amounts of information. However, such information is also highly prone to creating and/or diffusing mistakes and misunderstandings in scientific issues. In 2013 we produced a website (www.sunability.unina2.it) reporting on some research outputs from the University of Campania Luigi Vanvitelli (formerly the Second University of Naples, SUN), and shared it on Facebook and Twitter to analyse the effectiveness of these platforms in scientific dissemination. The study results suggest that (i) a regular update of the website stimulates the user's interest, (ii) Campania's citizens are more concerned with pollution problems than natural hazards, and (iii) direct involvement of researchers effectively enhances web-mediated scientific dissemination.

Role and reality: technology transfer at Canadian universities.

PubMed

Bubela, Tania M; Caulfield, Timothy

2010-09-01

Technology transfer offices (TTOs) play a central role in the knowledge translation and commercialization agenda of Canadian universities. Despite this presumed mandate, there is a disconnect between the expectations of government and research institutions (which view TTOs' primary role as the promotion of profitable commercialization activities) and the reality of what TTOs do. Interviews with professionals at Canadian TTOs have revealed that, at their best, TTOs support the social and academic missions of their institutions by facilitating knowledge mobilization and research relationships with other sectors, including industry; however, this does not always produce obvious or traditional commercial outputs. Thus, the existing metrics used to measure the success of TTOs do not capture this reality and, as such, realignment is needed. Copyright 2010 Elsevier Ltd. All rights reserved.

Energy Feedback from X-ray Binaries in the Early Universe

NASA Technical Reports Server (NTRS)

Fragos, T.; Lehmer, B..; Naoz, S.; Zezas, A.; Basu-Zych, A.

2013-01-01

X-ray photons, because of their long mean-free paths, can easily escape the galactic environments where they are produced, and interact at long distances with the intergalactic medium, potentially having a significant contribution to the heating and reionization of the early universe. The two most important sources of X-ray photons in the universe are active galactic nuclei (AGNs) and X-ray binaries (XRBs). In this Letter we use results from detailed, large scale population synthesis simulations to study the energy feedback of XRBs, from the first galaxies (z (redshift) approximately equal to 20) until today.We estimate that X-ray emission from XRBs dominates over AGN at z (redshift) greater than or approximately equal to 6-8. The shape of the spectral energy distribution of the emission from XRBs shows little change with redshift, in contrast to its normalization which evolves by approximately 4 orders of magnitude, primarily due to the evolution of the cosmic star-formation rate. However, the metallicity and the mean stellar age of a given XRB population affect significantly its X-ray output. Specifically, the X-ray luminosity from high-mass XRBs per unit of star-formation rate varies an order of magnitude going from solar metallicity to less than 10% solar, and the X-ray luminosity from low-mass XRBs per unit of stellar mass peaks at an age of approximately 300 Myr (million years) and then decreases gradually at later times, showing little variation for mean stellar ages 3 Gyr (Giga years, or billion years). Finally, we provide analytical and tabulated prescriptions for the energy output of XRBs, that can be directly incorporated in cosmological simulations.

Investing in African research training institutions creates sustainable capacity for Africa: the case of the University of the Witwatersrand School of Public Health masters programme in epidemiology and biostatistics

PubMed Central

2012-01-01

Background Improving health in Africa is a high priority internationally. Inadequate research capacity to produce local, relevant research has been identified as a limitation to improved population health. Increasing attention is being paid to the higher education sector in Africa as a method of addressing this; evidence that such investment is having the desired impact is required. A 1998 3-year investment by the Special Programme for Research and Training in Tropical Diseases (TDR) in research training at the School of Public Health, University of the Witwatersrand, South Africa was reviewed to assess its' impact. Methods A descriptive cross-sectional survey of the 70 students registered for the masters programme in epidemiology & biostatistics from 2000-2005 was conducted. Data were collected from self-administered questionnaires. Results Sixty percent (42/70) of students responded. At the time of the survey 19% of respondents changed their country of residence after completion of the masters course, 14% migrated within Africa and 5% migrated out of Africa. Approximately half (47%) were employed as researchers and 38% worked in research institutions. Sixty percent reported research output, and four graduates were pursuing PhD studies. Government subsidy to higher education institutions, investments of the University of the Witwatersrand in successful programmes and ongoing bursaries for students to cover tuition fees were important for sustainability. Conclusions Investing in African institutions to improve research training capacity resulted in the retention of graduates in Africa in research positions and produced research output. Training programmes can be sustained when national governments invest in higher education and where that funding is judiciously applied. Challenges remain if funding for students bursaries is not available. PMID:22475629

Technical efficiency and resources allocation in university hospitals in Tehran, 2009-2012.

PubMed

Rezapour, Aziz; Ebadifard Azar, Farbod; Yousef Zadeh, Negar; Roumiani, YarAllah; Bagheri Faradonbeh, Saeed

2015-01-01

Assessment of hospitals' performance in achieving its goals is a basic necessity. Measuring the efficiency of hospitals in order to boost resource productivity in healthcare organizations is extremely important. The aim of this study was to measure technical efficiency and determining status of resource allocation in some university hospitals, in Tehran, Iran. This study was conducted in 2012; the research population consisted of all hospitals affiliated to Iran and Tehran medical sciences universities of. Required data, such as human and capital resources information and also production variables (hospital outputs) were collected from data centers of studied hospitals. Data were analyzed using data envelopment analysis (DEA) method, Deap2,1 software; and the stochastic frontier analysis (SFA) method, Frontier 4,1 software. According to DEA method, average of technical, management (pure) and scale efficiency of the studied hospitals during the study period were calculated 0.87, 0.971, and 0.907, respectively. All kinds of efficiency did not follow a fixed trend over the study time and were constantly changing. In the stochastic frontier's production function analysis, the technical efficiency of the studied industry during the study period was estimated to be 0.389. This study represented hospitals with the highest and lowest efficiency. Reference hospitals (more efficient states) were indicated for the inefficient centers. According to the findings, it was found that in the hospitals that do not operate efficiently, there is a capacity to improve the technical efficiency by removing excess inputs without changes in the level of outputs. However, by the optimal allocation of resources in most studied hospitals, very important economy of scale can be achieved.

A methodological combined framework for roadmapping biosensor research: a fault tree analysis approach within a strategic technology evaluation frame.

PubMed

Siontorou, Christina G; Batzias, Fragiskos A

2014-03-01

Biosensor technology began in the 1960s to revolutionize instrumentation and measurement. Despite the glucose sensor market success that revolutionized medical diagnostics, and artificial pancreas promise currently the approval stage, the industry is reluctant to capitalize on other relevant university-produced knowledge and innovation. On the other hand, the scientific literature is extensive and persisting, while the number of university-hosted biosensor groups is growing. Considering the limited marketability of biosensors compared to the available research output, the biosensor field has been used by the present authors as a suitable paradigm for developing a methodological combined framework for "roadmapping" university research output in this discipline. This framework adopts the basic principles of the Analytic Hierarchy Process (AHP), replacing the lower level of technology alternatives with internal barriers (drawbacks, limitations, disadvantages), modeled through fault tree analysis (FTA) relying on fuzzy reasoning to count for uncertainty. The proposed methodology is validated retrospectively using ion selective field effect transistor (ISFET) - based biosensors as a case example, and then implemented prospectively membrane biosensors, putting an emphasis on the manufacturability issues. The analysis performed the trajectory of membrane platforms differently than the available market roadmaps that, considering the vast industrial experience in tailoring and handling crystallic forms, suggest the technology path of biomimetic and synthetic materials. The results presented herein indicate that future trajectories lie along with nanotechnology, and especially nanofabrication and nano-bioinformatics, and focused, more on the science-path, that is, on controlling the natural process of self-assembly and the thermodynamics of bioelement-lipid interaction. This retained the nature-derived sensitivity of the biosensor platform, pointing out the differences between the scope of academic research and the market viewpoint.

Technical efficiency and resources allocation in university hospitals in Tehran, 2009-2012

PubMed Central

Rezapour, Aziz; Ebadifard Azar, Farbod; Yousef Zadeh, Negar; Roumiani, YarAllah; Bagheri Faradonbeh, Saeed

2015-01-01

Background: Assessment of hospitals’ performance in achieving its goals is a basic necessity. Measuring the efficiency of hospitals in order to boost resource productivity in healthcare organizations is extremely important. The aim of this study was to measure technical efficiency and determining status of resource allocation in some university hospitals, in Tehran, Iran. Methods: This study was conducted in 2012; the research population consisted of all hospitals affiliated to Iran and Tehran medical sciences universities of. Required data, such as human and capital resources information and also production variables (hospital outputs) were collected from data centers of studied hospitals. Data were analyzed using data envelopment analysis (DEA) method, Deap2,1 software; and the stochastic frontier analysis (SFA) method, Frontier 4,1 software. Results: According to DEA method, average of technical, management (pure) and scale efficiency of the studied hospitals during the study period were calculated 0.87, 0.971, and 0.907, respectively. All kinds of efficiency did not follow a fixed trend over the study time and were constantly changing. In the stochastic frontier's production function analysis, the technical efficiency of the studied industry during the study period was estimated to be 0.389. Conclusion: This study represented hospitals with the highest and lowest efficiency. Reference hospitals (more efficient states) were indicated for the inefficient centers. According to the findings, it was found that in the hospitals that do not operate efficiently, there is a capacity to improve the technical efficiency by removing excess inputs without changes in the level of outputs. However, by the optimal allocation of resources in most studied hospitals, very important economy of scale can be achieved. PMID:26793657

Smart measurement system for resistive (bridge) or capacitive sensors

NASA Astrophysics Data System (ADS)

Wang, Guijie; Meijer, Gerard C. M.

1998-07-01

A low-cost smart measurement system for resistive (bridge) and capacitive sensors is presented and demonstrated. The measurement system consists of three main parts: the sensor element, a universal transducer interface (UTI) and a microcontroller. The UTI is a sensor-signal-to-time converter, based on a period-modulated oscillator, which is equipped with front-ends for many types of resistive (bridge) and capacitive sensors, and which generates a microcontroller-compatible output signal. The microcontroller performs data acquisition of the output signals from the interface UTI, controls the working status of the UTI for a specified application and communicates with a personal computer. Continuous auto-calibration of the offset and the gain of the complete system is applied to eliminate many nonidealities. Experimental results show that the accuracy and resolution are 14 bits and 16 bits, respectively, for a measurement time of about 100 ms.

Modeling of processes of formation of the images in optical-electronic systems

NASA Astrophysics Data System (ADS)

Grudin, B. N.; Plotnikov, V. S.; Fischenko, V. K.

2001-08-01

The digital model of the multicomponent coherent optical system with arbitrary layout of optical elements (lasers, lenses, phototransparencies with recording of the function of transmission of a specimens or filters, photoregistrars), constructed with usage of fast algorithms is considered. The model is realized as the program for personal computers in operational systems Windows 95, 98 and Windows NT. At simulation, for example, coherent system consisting of twenty elementary optical cascades a relative error in the output image as a rule does not exceed 0.25% when N >= 256 (N x N - the number of discrete samples on the image), and time of calculation of the output image on a computer (Pentium-2, 300 MHz) for N = 512 does not exceed one minute. The program of simulation of coherent optical systems will be utilized in scientific researches and at tutoring the students of Far East State University.

System capacity and economic modeling computer tool for satellite mobile communications systems

NASA Technical Reports Server (NTRS)

Wiedeman, Robert A.; Wen, Doong; Mccracken, Albert G.

1988-01-01

A unique computer modeling tool that combines an engineering tool with a financial analysis program is described. The resulting combination yields a flexible economic model that can predict the cost effectiveness of various mobile systems. Cost modeling is necessary in order to ascertain if a given system with a finite satellite resource is capable of supporting itself financially and to determine what services can be supported. Personal computer techniques using Lotus 123 are used for the model in order to provide as universal an application as possible such that the model can be used and modified to fit many situations and conditions. The output of the engineering portion of the model consists of a channel capacity analysis and link calculations for several qualities of service using up to 16 types of earth terminal configurations. The outputs of the financial model are a revenue analysis, an income statement, and a cost model validation section.

Investigation of high duty factor ISR RFQ-1000

NASA Astrophysics Data System (ADS)

Lu, Y. R.; Chen, C. E.; Fang, J. X.; Gao, S. L.; Guo, J. F.; Guo, Z. Y.; Li, D. S.; Li, W. G.; Pan, O. J.; Ren, X. T.; Wu, Y.; Yan, X. Q.; Yu, J. X.; Yu, M. L.; Ratzinger, U.; Deitinghoff, H.; Klein, H.; Schempp, A.

2003-12-01

Two Integral Split Ring (ISR) RFQs with high duty factor of 16.7% have been designed for the application of heavy ion implantation and built in the past several years at Institute of Heavy Ion Physics (IHIP) in Peking University. Two kinds of PIG ion sources with permanent magnets and LEBT were installed and optimized for the injection into these two RFQs. The positive O+ and negative O- ions were extracted and accelerated separately as well as simultaneously. The output macro pulse O- beam current reached 660 μA at a transmission efficiency of more than 82%. The N+ beam was also accelerated with similar transmission efficiency, but the output current intensity for positive ions were lower than the negative ions because of the extracted current limitation of ion sources. The improvements, especially for high duty factor and experimental results with the 1 MeV ISR RFQ will be presented in this paper.

Toward spin-based Magneto Logic Gate in Graphene

NASA Astrophysics Data System (ADS)

Wen, Hua; Dery, Hanan; Amamou, Walid; Zhu, Tiancong; Lin, Zhisheng; Shi, Jing; Zutic, Igor; Krivorotov, Ilya; Sham, Lu; Kawakami, Roland

Graphene has emerged as a leading candidate for spintronic applications due to its long spin diffusion length at room temperature. A universal magnetologic gate (MLG) based on spin transport in graphene has been recently proposed as the building block of a logic circuit which could replace the current CMOS technology. This MLG has five ferromagnetic electrodes contacting a graphene channel and can be considered as two three-terminal XOR logic gates. Here we demonstrate this XOR logic gate operation in such a device. This was achieved by systematically tuning the injection current bias to balance the spin polarization efficiency of the two inputs, and offset voltage in the detection circuit to obtain binary outputs. The output is a current which corresponds to different logic states: zero current is logic `0', and nonzero current is logic `1'. We find improved performance could be achieved by reducing device size and optimizing the contacts.

An Aperture Photometry Pipeline for K2 Data

NASA Astrophysics Data System (ADS)

Buzasi, Derek L.; Carboneau, Lindsey; Lezcano, Andy; Vydra, Ekaterina

2016-01-01

As part of an ongoing research program with undergraduate students at Florida Gulf Coast University, we have constructed an aperture photometry pipeline for K2 data. The pipeline performs dynamic automated aperture mask definition for all targets in the K2 fields, followed by aperture photometry and detrending. Our pipeline is currently used to support a number of projects, including studies of stellar rotation and activity, red giant asteroseismology, gyrochronology, and exoplanet searches. In addition, output is used to support an undergraduate class on exoplanets aimed at a student audience of both majors and non-majors. The pipeline is designed for both batch and single-target use, and is easily extensible to data from other missions, and pipeline output is available to the community. This paper will describe our pipeline and its capabilities and illustrate the quality of the results, drawing on all of the applications for which it is currently used.

A new method to calculate the beam charge for an integrating current transformer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu Yuchi; Han Dan; Zhu Bin

2012-09-15

The integrating current transformer (ICT) is a magnetic sensor widely used to precisely measure the charge of an ultra-short-pulse charged particle beam generated by traditional accelerators and new laser-plasma particle accelerators. In this paper, we present a new method to calculate the beam charge in an ICT based on circuit analysis. The output transfer function shows an invariable signal profile for an ultra-short electron bunch, so the function can be used to evaluate the signal quality and calculate the beam charge through signal fitting. We obtain a set of parameters in the output function from a standard signal generated bymore » an ultra-short electron bunch (about 1 ps in duration) at a radio frequency linear electron accelerator at Tsinghua University. These parameters can be used to obtain the beam charge by signal fitting with excellent accuracy.« less

Photovoltaic array: Power conditioner interface characteristics

NASA Technical Reports Server (NTRS)

Gonzalez, C. C.; Hill, G. M.; Ross, R. G., Jr.

1982-01-01

The electrical output (power, current, and voltage) of flat plate solar arrays changes constantly, due primarily to changes in cell temperature and irradiance level. As a result, array loads such as dc-to-ac power conditioners must be capable of accommodating widely varying input levels while maintaining operation at or near the maximum power point of the array. The array operating characteristics and extreme output limits necessary for the systematic design of array load interfaces under a wide variety of climatic conditions are studied. A number of interface parameters are examined, including optimum operating voltage, voltage energy, maximum power and current limits, and maximum open circuit voltage. The effect of array degradation and I-V curve fill factor or the array power conditioner interface is also discussed. Results are presented as normalized ratios of power conditioner parameters to array parameters, making the results universally applicable to a wide variety of system sizes, sites, and operating modes.

High rate data acquisition from Spacelab/Shuttle

NASA Technical Reports Server (NTRS)

Coffey, R.

1978-01-01

The need for high data rates from a variety of experiments on Spacelab/Shuttle produced the requirement for the Spacelab High Rate Multiplexer/Demultiplexer system. This system acquires serial digital data at asynchronous bit rates from up to sixteen experiments, two data buses, three voice links, two tape recorders, and a universal time channel. Experiment data rates may vary from 200 bps to 16 Mbps while recorded data rates range from 250 Kbps to 32 Mbps. The High Rate Multiplexer (HRM) accepts these data inputs and forms a serial PCM output at flexible rates up to 48 Mbps. This PCM output is transmitted to ground by a Ku-Band RF link via the Tracking and Data Relay Satellite System (TDRSS) or recorded on board for delayed transmission. A complementary ground based High Rate Demultiplexer (HRDM) accepts and demultiplexes the composite PCM data at ground processing locations.

Nanotechnology research for aerospace applications

NASA Astrophysics Data System (ADS)

Agee, Forrest J.; Lozano, Karen; Gutierrez, Jose M.; Chipara, Mircea; Thapa, Ram; Chow, Alice

2009-04-01

Nanotechnology is impacting the future of the military and aerospace. The increasing demands for high performance and property-specific applications are forcing the scientific world to take novel approaches in developing programs and accelerating output. CONTACT or Consortium for Nanomaterials for Aerospace Commerce and Technology is a cooperative nanotechnology research program in Texas building on an infrastructure that promotes collaboration between universities and transitioning to industry. The participants of the program include the US Air Force Research Laboratory (AFRL), five campuses of the University of Texas (Brownsville, Pan American, Arlington, Austin, and Dallas), the University of Houston, and Rice University. Through the various partnerships between the intellectual centers and the interactions with AFRL and CONTACT's industrial associates, the program represents a model that addresses the needs of the changing and competitive technological world. Into the second year, CONTACT has expanded to twelve projects that cover four areas of research: Adaptive Coatings and Surface Engineering, Nano Energetics, Electromagnetic Sensors, and Power Generation and Storage. This paper provides an overview of the CONTACT program and its projects including the research and development of new electrorheological fluids with nanoladen suspensions and composites and the potential applications.

Hydro-Piezoelectricity: A Renewable Energy Source for Autonomous Underwater Vehicles

DTIC Science & Technology

1999-09-30

having capacities of a few watts to hundreds of kW. Based on a unique Wave Energy Converter ( WEC ) buoy and intelligent power take-off algorithms, the... environmental monitoring. In addition, there will be significant dual use in the commercial sector for power generation in remote locations where the...2.5 meter by 6.5 meter long WEC at the LEO 15 site of Rutgers University. b. Multiple sensor outputs and performance data were reliably

Measuring the Value Added of Management: A Knowledge Value Added Approach

DTIC Science & Technology

2007-04-30

approach would work in an open acquisitions environment. Management “ Dark Matter ” Dark matter , in the physics sense, is largely unobservable—albeit...critical to understanding the physics of the universe. The dark matter of management has also been largely unobservable in the outputs of the core...this creative aspect as management “ dark matter .” This management “ dark matter ” has largely been assumed to be critical to the duties of a manager

Hawaii Regional Sediment Management: Regional Sediment Budget for the Kekaha Region of Kauai, HI

DTIC Science & Technology

2013-06-01

Waimea River . Some sediment passes from the Waimea cell to the west and is deposited in the Kikiaola Harbor entrance channel and basin . Upland... study regions, have been developed by the University of Hawaii Coastal Geology Group (UH CGG) (Fletcher et al. 2012) for the US Geological Survey... Study (WIS) (Hubertz 1992) hindcast dataset were used as input to the model STeady WAVE (STWAVE) (Smith et al. 2001). The model output provides

Technical efficiency of teaching hospitals in Iran: the use of Stochastic Frontier Analysis, 1999–2011

PubMed Central

Goudarzi, Reza; Pourreza, Abolghasem; Shokoohi, Mostafa; Askari, Roohollah; Mahdavi, Mahdi; Moghri, Javad

2014-01-01

Background: Hospitals are highly resource-dependent settings, which spend a large proportion of healthcare financial resources. The analysis of hospital efficiency can provide insight into how scarce resources are used to create health values. This study examines the Technical Efficiency (TE) of 12 teaching hospitals affiliated with Tehran University of Medical Sciences (TUMS) between 1999 and 2011. Methods: The Stochastic Frontier Analysis (SFA) method was applied to estimate the efficiency of TUMS hospitals. A best function, referred to as output and input parameters, was calculated for the hospitals. Number of medical doctors, nurses, and other personnel, active beds, and outpatient admissions were considered as the input variables and number of inpatient admissions as an output variable. Results: The mean level of TE was 59% (ranging from 22 to 81%). During the study period the efficiency increased from 61 to 71%. Outpatient admission, other personnel and medical doctors significantly and positively affected the production (P< 0.05). Concerning the Constant Return to Scale (CRS), an optimal production scale was found, implying that the productions of the hospitals were approximately constant. Conclusion: Findings of this study show a remarkable waste of resources in the TUMS hospital during the decade considered. This warrants policy-makers and top management in TUMS to consider steps to improve the financial management of the university hospitals. PMID:25114947

Primary health care research in Saudi Arabia: A quantitative analysis.

PubMed

Jahan, Saulat; Al-Saigul, Abdullah Mohammed

2017-01-01

The objective of this study was to analyze the published primary health care (PHC) research conducted in Saudi Arabia quantitatively and to determine the distribution of these research publications according to the topic, time, geographical location, and institution. In this descriptive study, we conducted literature search in PubMed and Google Scholar. The Medical Subject Headings terms: "Primary Health" AND "Saudi" and "Primary Care" AND "Saudi" were used for searching relevant journal articles. Relevant information about the journal articles, published till December 2011, was recorded on a coding instrument. From 1983 to 2011, a total of 655 PHC research articles were found. The publication output showed an increase with time. Original research articles (85.6%) were the main type of publications, and the most common study design was cross-sectional (93.4%). "Chronic diseases" and "health services research" were the main topics addressed. Riyadh province had the highest proportion (46.3%) of publications, and the universities (56.2%), followed by the Saudi Ministry of Health (24.9%), were the main institutions publishing the research. Despite a well-established PHC setup in Saudi Arabia, the research outputs are low. Most of the published articles are cross-sectional studies and are conducted by the universities. Enhancing the PHC research by creating a supportive environment will lead to an increased evidence base for PHC and its effective translation into service delivery.

A theory of cerebellar cortex and adaptive motor control based on two types of universal function approximation capability.

PubMed

Fujita, Masahiko

2016-03-01

Lesions of the cerebellum result in large errors in movements. The cerebellum adaptively controls the strength and timing of motor command signals depending on the internal and external environments of movements. The present theory describes how the cerebellar cortex can control signals for accurate and timed movements. A model network of the cerebellar Golgi and granule cells is shown to be equivalent to a multiple-input (from mossy fibers) hierarchical neural network with a single hidden layer of threshold units (granule cells) that receive a common recurrent inhibition (from a Golgi cell). The weighted sum of the hidden unit signals (Purkinje cell output) is theoretically analyzed regarding the capability of the network to perform two types of universal function approximation. The hidden units begin firing as the excitatory inputs exceed the recurrent inhibition. This simple threshold feature leads to the first approximation theory, and the network final output can be any continuous function of the multiple inputs. When the input is constant, this output becomes stationary. However, when the recurrent unit activity is triggered to decrease or the recurrent inhibition is triggered to increase through a certain mechanism (metabotropic modulation or extrasynaptic spillover), the network can generate any continuous signals for a prolonged period of change in the activity of recurrent signals, as the second approximation theory shows. By incorporating the cerebellar capability of two such types of approximations to a motor system, in which learning proceeds through repeated movement trials with accompanying corrections, accurate and timed responses for reaching the target can be adaptively acquired. Simple models of motor control can solve the motor error vs. sensory error problem, as well as the structural aspects of credit (or error) assignment problem. Two physiological experiments are proposed for examining the delay and trace conditioning of eyelid responses, as well as saccade adaptation, to investigate this novel idea of cerebellar processing. Copyright © 2015 Elsevier Ltd. All rights reserved.

Study of Scientific Production of Community Medicines' Department Indexed in ISI Citation Databases.

PubMed

Khademloo, Mohammad; Khaseh, Ali Akbar; Siamian, Hasan; Aligolbandi, Kobra; Latifi, Mahsoomeh; Yaminfirooz, Mousa

2016-10-01

In the scientometric, the main criterion in determining the scientific position and ranking of the scientific centers, particularly the universities, is the rate of scientific production and innovation, and in all participations in the global scientific development. One of the subjects more involved in repeatedly dealt with science and technology and effective on the improvement of health is medical science fields. In this research using scientometric and citation analysis, we studied the rate of scientific productions in the field of community medicine, which is the numbers of articles published and indexed in ISI database from 2000 to 2010. This study is scientometric using the survey and analytical citation. The study samples included all of the articles in the ISI database from 2000 to 2010. For the data collection, the advance method of searching was used at the ISI database. The ISI analyses software and descriptive statistics were used for data analysis. Results showed that among the five top universities in producing documents, Tehran University of Medical Sciences with 88 (22.22%) documents are allocated to the first rank of scientific products. M. Askarian with 36 (90/9%) published documents; most of the scientific outputs in Community medicine, in the international arena is the most active author in this field. In collaboration with other writers, Iranian departments of Community Medicine with 27 published articles have the greatest participation with scholars of English authors. In the process of scientific outputs, the results showed that the scientific process was in its lowest in the years 2000 to 2004, and while the department of Community medicine in 2009 allocated most of the production process to itself. Iranian Journal of Public Health and Saudi Medical Journal each of them had 16 articles which had most participation rate in the publishing of community medicine's department. On the type of carrier, community medicine's department by presentation of 340(85.86%) articles had presented most of their scientific productions in the format of article, also in the field of community medicine outputs, article entitled: "Iron loading and erythrophagocytosis increase ferroportin 1 (FPN1) expression in J774 macrophages"(1) with 81 citations ranked first in cited articles. Subject areas of occupational health with 70 articles and subject areas of general medicine with 69 articles ranked the most active research areas in the Production of community medicine's department. the obtained data showed the much growth of scientific production. The Tehran University of medical Sciences ranked the first in publishing articles in community medicine's department and with most collaboration with community medicine department of England writers in this field and most writers will present their works in paper format.

Study of Scientific Production of Community Medicines’ Department Indexed in ISI Citation Databases

PubMed Central

Khademloo, Mohammad; Khaseh, Ali Akbar; Siamian, Hasan; Aligolbandi, Kobra; Latifi, Mahsoomeh; Yaminfirooz, Mousa

2016-01-01

Background: In the scientometric, the main criterion in determining the scientific position and ranking of the scientific centers, particularly the universities, is the rate of scientific production and innovation, and in all participations in the global scientific development. One of the subjects more involved in repeatedly dealt with science and technology and effective on the improvement of health is medical science fields. In this research using scientometric and citation analysis, we studied the rate of scientific productions in the field of community medicine, which is the numbers of articles published and indexed in ISI database from 2000 to 2010. Methods: This study is scientometric using the survey and analytical citation. The study samples included all of the articles in the ISI database from 2000 to 2010. For the data collection, the advance method of searching was used at the ISI database. The ISI analyses software and descriptive statistics were used for data analysis. Results: Results showed that among the five top universities in producing documents, Tehran University of Medical Sciences with 88 (22.22%) documents are allocated to the first rank of scientific products. M. Askarian with 36 (90/9%) published documents; most of the scientific outputs in Community medicine, in the international arena is the most active author in this field. In collaboration with other writers, Iranian departments of Community Medicine with 27 published articles have the greatest participation with scholars of English authors. In the process of scientific outputs, the results showed that the scientific process was in its lowest in the years 2000 to 2004, and while the department of Community medicine in 2009 allocated most of the production process to itself. Iranian Journal of Public Health and Saudi Medical Journal each of them had 16 articles which had most participation rate in the publishing of community medicine’s department. On the type of carrier, community medicine’s department by presentation of 340(85.86%) articles had presented most of their scientific productions in the format of article, also in the field of community medicine outputs, article entitled: “Iron loading and erythrophagocytosis increase ferroportin 1 (FPN1) expression in J774 macrophages”(1) with 81 citations ranked first in cited articles. Subject areas of occupational health with 70 articles and subject areas of general medicine with 69 articles ranked the most active research areas in the Production of community medicine’s department. Conclusion: the obtained data showed the much growth of scientific production. The Tehran University of medical Sciences ranked the first in publishing articles in community medicine’s department and with most collaboration with community medicine department of England writers in this field and most writers will present their works in paper format. PMID:28077896

Recent Cooperative Research Activities of HDD and Flexible Media Transport Technologies in Japan

NASA Astrophysics Data System (ADS)

Ono, Kyosuke

This paper presents the recent status of industry-university cooperative research activities in Japan on the mechatronics of information storage and input/output equipment. There are three research committees for promoting information exchange on technical problems and research topics of head-disk interface in hard disk drives (HDD), flexible media transport and image printing processes which are supported by the Japan Society of Mechanical Engineering (JSME), the Japanese Society of Tribologists (JAST) and the Japan Society of Precision Engineering (JSPE). For hard disk drive technology, the Storage Research Consortium (SRC) is supporting more than 40 research groups in various different universities to perform basic research for future HDD technology. The past and present statuses of these activities are introduced, particularly focusing on HDD and flexible media transport mechanisms.

Sri Lanka in global medical research: a scientific analysis of the Sri Lankan research output during 2000-2009.

PubMed

Ranasinghe, Priyanga; Jayawardena, Ranil; Katulanda, Prasad

2012-02-24

Scientific research is an essential component in guiding improvements in health systems. There are no studies examining the Sri Lankan medical research output at international level. The present study evaluated the Sri Lankan research performance in medicine as reflected by the research publications output between years 2000-2009. This study was based on Sri Lankan medical research publication data, retrieved from the SciVerse Scopus® from January 2000 to December 2009. The process of article selection was as follows: Affiliation - 'Sri Lanka' or 'Ceylon', Publication year - 'January 2000 to December 2009' and Subject area - 'Life and Health Sciences'. The articles identified were classified according to disease, medical speciality, institutions, major international collaborators, authors and journals. Sri Lanka's cumulative medical publications output between years 2000-2009 was 1,740 articles published in 160 different journals. The average annual publication growth rate was 9.1%. Majority of the articles were published in 'International' (n = 950, 54.6%) journals. Most articles were descriptive studies (n = 611, 35.1%), letters (n-345, 19.8%) and case reports (n = 311, 17.9%). The articles were authored by 148 different Sri Lankan authors from 146 different institutions. The three most prolific local institutions were Universities of; Colombo (n = 547), Kelaniya (n = 246) and Peradeniya (n = 222). Eighty four countries were found to have published collaborative papers with Sri Lankan authors during the last decade. UK was the largest collaborating partner (n = 263, 15.1%).Malaria (n = 75), Diabetes Mellitus (n = 55), Dengue (n = 53), Accidental injuries (n = 42) and Lymphatic filariasis (n = 40) were the major diseases studied. The 1,740 publications were cited 9,708 times, with an average citation of 5.6 per paper. The most cited paper had 203 citations, while there were 597 publications with no citations. The Sri Lankan authors' contribution to the global medical research output during the last decade was only 0.086%. The Sri Lankan medical research output during the last decade is only a small fraction of the global research output. There it is a necessity to setup an enabling environment for research, with a proper vision, support, funds and training. In addition, collaborations across the region need to be strengthened to face common regional health challenges.

Sri Lanka in global medical research: a scientific analysis of the Sri Lankan research output during 2000-2009

PubMed Central

2012-01-01

Background Scientific research is an essential component in guiding improvements in health systems. There are no studies examining the Sri Lankan medical research output at international level. The present study evaluated the Sri Lankan research performance in medicine as reflected by the research publications output between years 2000-2009. Methods This study was based on Sri Lankan medical research publication data, retrieved from the SciVerse Scopus® from January 2000 to December 2009. The process of article selection was as follows: Affiliation - 'Sri Lanka' or 'Ceylon', Publication year - 'January 2000 to December 2009' and Subject area - 'Life and Health Sciences'. The articles identified were classified according to disease, medical speciality, institutions, major international collaborators, authors and journals. Results Sri Lanka's cumulative medical publications output between years 2000-2009 was 1,740 articles published in 160 different journals. The average annual publication growth rate was 9.1%. Majority of the articles were published in 'International' (n = 950, 54.6%) journals. Most articles were descriptive studies (n = 611, 35.1%), letters (n-345, 19.8%) and case reports (n = 311, 17.9%). The articles were authored by 148 different Sri Lankan authors from 146 different institutions. The three most prolific local institutions were Universities of; Colombo (n = 547), Kelaniya (n = 246) and Peradeniya (n = 222). Eighty four countries were found to have published collaborative papers with Sri Lankan authors during the last decade. UK was the largest collaborating partner (n = 263, 15.1%). Malaria (n = 75), Diabetes Mellitus (n = 55), Dengue (n = 53), Accidental injuries (n = 42) and Lymphatic filariasis (n = 40) were the major diseases studied. The 1,740 publications were cited 9,708 times, with an average citation of 5.6 per paper. The most cited paper had 203 citations, while there were 597 publications with no citations. The Sri Lankan authors' contribution to the global medical research output during the last decade was only 0.086%. Conclusion The Sri Lankan medical research output during the last decade is only a small fraction of the global research output. There it is a necessity to setup an enabling environment for research, with a proper vision, support, funds and training. In addition, collaborations across the region need to be strengthened to face common regional health challenges. PMID:22364509

The use of mathematics and electric circuit simulator software in the learning process of wireless power transfer for electrical engineering students

NASA Astrophysics Data System (ADS)

Habibi, Muhammad Afnan; Fall, Cheikh; Setiawan, Eko; Hodaka, Ichijo; Wijono, Hasanah, Rini Nur

2017-09-01

Wireless Power Transfer (WPT) isa technique to deliver the electrical power from the source to the load without using wires or conductors. The physics of WPT is well known and basically learned as a course in high school. However, it is very recent that WPT is useful in practical situation: it should be able to transfer electric power in a significant efficiency. It means that WPT requires not much knowledge to university students but may attract students because of cutting edge technique of WPT. On the other hand, phenomena of WPT is invisible and sometimes difficult to imagine. The objective of this paper is to demonstrate the use of mathematics and an electric circuit simulator using MATHEMATICA software and LT-SPICE software in designing a WPT system application. It brings to a conclusion that the students as well the designer can take the benefit of the proposed method. By giving numerical values to circuit parameters, students acquires the power output and efficiency of WPT system. The average power output as well as the efficiency of the designed WPT which resonance frequency set on the system,leads it to produce high output power and better efficiency.

A C-band 55% PAE high gain two-stage power amplifier based on AlGaN/GaN HEMT

NASA Astrophysics Data System (ADS)

Zheng, Jia-Xin; Ma, Xiao-Hua; Lu, Yang; Zhao, Bo-Chao; Zhang, Hong-He; Zhang, Meng; Cao, Meng-Yi; Hao, Yue

2015-10-01

A C-band high efficiency and high gain two-stage power amplifier based on AlGaN/GaN high electron mobility transistor (HEMT) is designed and measured in this paper. The input and output impedances for the optimum power-added efficiency (PAE) are determined at the fundamental and 2nd harmonic frequency (f0 and 2f0). The harmonic manipulation networks are designed both in the driver stage and the power stage which manipulate the second harmonic to a very low level within the operating frequency band. Then the inter-stage matching network and the output power combining network are calculated to achieve a low insertion loss. So the PAE and the power gain is greatly improved. In an operation frequency range of 5.4 GHz-5.8 GHz in CW mode, the amplifier delivers a maximum output power of 18.62 W, with a PAE of 55.15% and an associated power gain of 28.7 dB, which is an outstanding performance. Project supported by the National Key Basic Research Program of China (Grant No. 2011CBA00606), Program for New Century Excellent Talents in University, China (Grant No. NCET-12-0915), and the National Natural Science Foundation of China (Grant No. 61334002).

[Scientific output on nutrition in the scope of Primary Health Care in Brazil: a review of the literature].

PubMed

Canella, Daniela Silva; Silva, Ana Carolina Feldenheimer da; Jaime, Patrícia Constante

2013-02-01

Nutrition campaigns in Primary Health Care (PHC) play an important role in health promotion and the prevention and treatment of injuries. The scope of this paper is to chart and evaluate the scientific output of nutrition in Brazilian PHC. A search and review of the literature and papers was conducted on the PubMed and Lilacs databases, using key words related to PHC and nutrition. The studies were restricted to Brazil with the professionals or population assisted by PHC in the Brazilian Unified Health System and published prior to March 2011. The references in the selected articles were also consulted in order to identify additional studies. From the total of papers located, 68 were eligible and a further 49 were identified in the references lists, such that a total of 117 papers were analyzed. The studies reviewed were mostly original articles, using quantitative methodology, carried out by São Paulo University in that state and published from 2002 to 2011. The main issues were diagnosis seeking the evaluation of nutritional status involving children. The output in this field is growing, although there is a need to redirect the scope of future studies to a focus on intervention models and program evaluation.

Output congestion leads to compromised care in Peruvian public hospital neonatal units.

PubMed

Arrieta, Alejandro; Guillén, Jorge

2017-06-01

Peru is moving toward a universal health insurance system, and it is facing important challenges in the provision of public health services. As more citizens gain access to health insurance, the flow of patients exceeds the capacity of public hospitals to provide care with quality. In this study we explore the relationship between technical efficiency and patient safety events in neonatal care units of Peru's public hospitals. We use Data Envelope Analysis (DEA) with output congestion to assess the association between technical efficiency and patient safety events. We study 35 neonatal care units of public hospitals in Peru's Social Security Health System, and identify two undesirable (risk-adjusted) safety outcomes: neonatal mortality and near-miss neonatal mortality. We found that for about half of hospital's neonatal care units, technical efficiency is affected by output congestion. For those hospitals, patient safety is being compromised by receiving too many patients. Our results are consistent with public reports indicating that hospitals in the Peru's Social Security Health System are overcrowded, affecting efficiency and jeopardizing quality of care. We found that most congested hospitals are located in the capital city and suburban areas, and are more likely to be hospitals with the lowest and the highest level of care. Our results call for improvements in the patient referral system and capacity expansion.

Apparatus and method for increasing the bandwidth of a laser beam

DOEpatents

Chaffee, Paul H.

1991-01-01

A method and apparatus is disclosed that provides a laser output beam having a broad bandwidth and an intensity smooth over time. The bandwidth of the laser output can be varied easily by varying the intensity of a broadband source. The present invention includes an optical modulation apparatus comprising a narrowband laser that outputs a horizontally polarized beam (a "signal beam") and a broadband laser that outputs a vertically polarized beam (a "pump beam") whose intensity varies rapidly. The two beam are coupled into a birefringent laser material so that the respective polarizations coincide with the principal axes of the material. As the two beams travel through the material, the polarization preserving properties of the birefringent material maintain the respective polarizations of the two beam; however there is coupling between the two beams as a result of cross phase modulations, which induces a bandwidth change of the signal beam. The amount of bandwidth change is dependent upon the average intensity of the pump beam. The beams are coupled out from the birefringent material and the modulated signal beam is separated by a polarization selector. The modulated signal beam now has a wider bandwidth, and its shape remains smooth in time. This signal beam can be applied to incoherence inducing systems. The different bandwidths required by these different incoherence inducing systems can be obtained by varying the intensity of the pump beam. The United States Government has rights in this invention pursuant to Contract No. W7405-ENG-48 between the United States Department of Energy and the University of California for the operation of Lawrence Livermore National Laboratory.

Auroral oval kinematics program

NASA Technical Reports Server (NTRS)

Comfort, R. H.

1972-01-01

A computer program which determines the geographic location of the auroral oval for given universal time and level of geomagnetic activity was developed for use on the IBM 7094 computer. The program provides both printed output of geographic coordinates of auroral oval boundaries and polar plots of the auroral oval. In addition, there is available a time-integration option which indicates how long a given location is under the auroral oval during a specified period. A description is given of the program and its use.

Digital Control System for An On-Borad Oxygen Generator

DTIC Science & Technology

1980-12-01

pecple who contributed to the success of this thesis. They include the following: Major Borky, my thesis advisor; the entire staff of the Electrical ...to required concentration. OE4 23 MOV A, # Combine rotation direction OE5 OD 0000/1101 with LEC control and016 4Q ORL A, R3 output resulItsOE7 AB MDV ...then attended the University of Texas at Austin and graduated with a Bachelor of Science degree in Electrical Engineering in 1971. After graduation, he

Fuzzy variable impedance control based on stiffness identification for human-robot cooperation

NASA Astrophysics Data System (ADS)

Mao, Dachao; Yang, Wenlong; Du, Zhijiang

2017-06-01

This paper presents a dynamic fuzzy variable impedance control algorithm for human-robot cooperation. In order to estimate the intention of human for co-manipulation, a fuzzy inference system is set up to adjust the impedance parameter. Aiming at regulating the output fuzzy universe based on the human arm’s stiffness, an online stiffness identification method is developed. A drag interaction task is conducted on a 5-DOF robot with variable impedance control. Experimental results demonstrate that the proposed algorithm is superior.

Protocol Standards and Implementation within the Digital Engineering Laboratory Computer Network (DELNET) Using the Universal Network Interface Device (UNID). Part 1.

DTIC Science & Technology

1983-12-01

Initializes the data tables shared by both the Local and Netowrk Operating Systems. 3. Invint: Written in Assembly Language. Initializes the Input/Output...connection with an appropriate type and grade of transport service and appropriate security authentication (Ref 6:38). Data Transfer within a session...V.; Kent, S. Security in oihr Level Protocolst Anorgaches. Alternatives and Recommendations, Draft Report ICST/HLNP-81-19, Wash ingt on,,D.C.: Dept

Eleventh International Laser Radar Conference, Wisconsin University-Madison, 21-25 June 1982.

DTIC Science & Technology

1982-06-01

an aircraft altitude, Iif(x) is an intensity of if beat signal in the sky at the point x, I is the laser power , y is the albedo of the ground surface...the aircraft flight path 2) Minimize degradation or power loss to the input/output path 3) Provide variable scan time points at rates up to .25...water particles. A lidar measurement at a specific point , therefore, is not necessarily representative of the entire globe. This will be discussed with

Hyperion 5113/A Infrasound Sensor Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merchant, Bion John

2015-09-01

Sandia National Laboratories has tested and evaluated an infrasound sensor, the 5113/A manufactured by Hyperion. These infrasound sensors measure pressure output by a methodology developed by the University of Mississippi. The purpose of the infrasound sensor evaluation was to determine a measured sensitivity, transfer function, power, self-noise, and dynamic range. The 5113/A infrasound sensor is a new revision of the 5000 series intended to meet the infrasound application requirements for use in the International Monitoring System (IMS) of the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO).

An Experiment Comparing Lexical and Statistical Methods for Extracting MeSH Terms from Clinical Free Text

PubMed Central

Cooper, Gregory F.; Miller, Randolph A.

1998-01-01

Abstract Objective: A primary goal of the University of Pittsburgh's 1990-94 UMLS-sponsored effort was to develop and evaluate PostDoc (a lexical indexing system) and Pindex (a statistical indexing system) comparatively, and then in combination as a hybrid system. Each system takes as input a portion of the free text from a narrative part of a patient's electronic medical record and returns a list of suggested MeSH terms to use in formulating a Medline search that includes concepts in the text. This paper describes the systems and reports an evaluation. The intent is for this evaluation to serve as a step toward the eventual realization of systems that assist healthcare personnel in using the electronic medical record to construct patient-specific searches of Medline. Design: The authors tested the performances of PostDoc, Pindex, and a hybrid system, using text taken from randomly selected clinical records, which were stratified to include six radiology reports, six pathology reports, and six discharge summaries. They identified concepts in the clinical records that might conceivably be used in performing a patient-specific Medline search. Each system was given the free text of each record as an input. The extent to which a system-derived list of MeSH terms captured the relevant concepts in these documents was determined based on blinded assessments by the authors. Results: PostDoc output a mean of approximately 19 MeSH terms per report, which included about 40% of the relevant report concepts. Pindex output a mean of approximately 57 terms per report and captured about 45% of the relevant report concepts. A hybrid system captured approximately 66% of the relevant concepts and output about 71 terms per report. Conclusion: The outputs of PostDoc and Pindex are complementary in capturing MeSH terms from clinical free text. The results suggest possible approaches to reduce the number of terms output while maintaining the percentage of terms captured, including the use of UMLS semantic types to constrain the output list to contain only clinically relevant MeSH terms. PMID:9452986

Probing the Hot and Energetic Universe: X-rays and Astrophysics

NASA Astrophysics Data System (ADS)

Bautz, Marshall; Kraft, Ralph

2016-03-01

X-ray observations are a cornerstone of our understanding of the formation and evolution of structure in the Universe, from solar-system-sized supermassive black holes (SMBH) to the largest galaxy clusters. At the most basic level, a significant fraction of the energy output in the Universe is in X-rays, and much of this emission traces the response of baryonic matter to the inexorable, gravity-driven growth of cosmic structure. At present, for example, half or more of the baryons in the Universe reside in a hot (>1 MK) X-ray-emitting phase. We discuss some of the remarkable progress that has been made in understanding the broad outlines of these processes with the current generation of X-ray observatories. We summarize the potential of recently launched and forthcoming X-ray observatories to track the development of large-scale cosmic structure and to understand the physics linking the growth of SMBH with that of the (many orders of magnitude larger) galaxies and clusters which host them. We briefly review nearer-term prospects for smaller, focussed missions, including one that will soon exploit pulsating X-ray emission from neutron stars to probe the equation of state of matter at nuclear densities.

Assessing Clinical and Life Sciences Performance of Research Institutions in Split, Croatia, 2000-2006

PubMed Central

Puljak, Livia; Vukojević, Katarina; Lovrić Kojundžić, Sanja; Sapunar, Damir

2008-01-01

Aim To evaluate publications of clinical and life scientists from research institutions in Split, Croatia, and the publication output from government-funded research projects of the University of Split School of Medicine. Methods We analyzed the number of publications from research institutions in Split, Croatia, in the 2000-2006 period, relative impact factors, predominant research fields, output of researchers from the University of Split School of Medicine receiving government research grants, and the average price of published article. Results From 2000 to 2006, clinical and life scientists published 350 articles indexed in Thomson Scientific database Current Contents. The number of articles increased from 30 in 2000 to 76 in 2006, and the average impact factor of journals where these articles were published increased from 2.03 in 2000 to 2.89 in 2006. Twenty percent of articles (72/350) were published in the Croatian Medical Journal. Principal investigators of the 12 research projects receiving government grants published 0 to 8 articles related to the project topic in the 2002-2006 research grant cycle. The research grantees published 78 original research articles, with an average price per article of € 29.210. Conclusion Although the number and impact factor of research articles published by clinical and life scientists from Split, Croatia, is increasing, it is still low when the number of scientists is taken into account. There should be better mechanisms of control and evaluation of research performance of government-funded research projects. PMID:18461671

Bio-Docklets: virtualization containers for single-step execution of NGS pipelines.

PubMed

Kim, Baekdoo; Ali, Thahmina; Lijeron, Carlos; Afgan, Enis; Krampis, Konstantinos

2017-08-01

Processing of next-generation sequencing (NGS) data requires significant technical skills, involving installation, configuration, and execution of bioinformatics data pipelines, in addition to specialized postanalysis visualization and data mining software. In order to address some of these challenges, developers have leveraged virtualization containers toward seamless deployment of preconfigured bioinformatics software and pipelines on any computational platform. We present an approach for abstracting the complex data operations of multistep, bioinformatics pipelines for NGS data analysis. As examples, we have deployed 2 pipelines for RNA sequencing and chromatin immunoprecipitation sequencing, preconfigured within Docker virtualization containers we call Bio-Docklets. Each Bio-Docklet exposes a single data input and output endpoint and from a user perspective, running the pipelines as simply as running a single bioinformatics tool. This is achieved using a "meta-script" that automatically starts the Bio-Docklets and controls the pipeline execution through the BioBlend software library and the Galaxy Application Programming Interface. The pipeline output is postprocessed by integration with the Visual Omics Explorer framework, providing interactive data visualizations that users can access through a web browser. Our goal is to enable easy access to NGS data analysis pipelines for nonbioinformatics experts on any computing environment, whether a laboratory workstation, university computer cluster, or a cloud service provider. Beyond end users, the Bio-Docklets also enables developers to programmatically deploy and run a large number of pipeline instances for concurrent analysis of multiple datasets. © The Authors 2017. Published by Oxford University Press.

Assessing clinical and life sciences performance of research institutions in Split, Croatia, 2000-2006.

PubMed

Puljak, Livia; Vukojević, Katarina; Lovrić Kojundzić, Sanja; Sapunar, Damir

2008-04-01

To evaluate publications of clinical and life scientists from research institutions in Split, Croatia, and the publication output from government-funded research projects of the University of Split School of Medicine. We analyzed the number of publications from research institutions in Split, Croatia, in the 2000-2006 period, relative impact factors, predominant research fields, output of researchers from the University of Split School of Medicine receiving government research grants, and the average price of published article. From 2000 to 2006, clinical and life scientists published 350 articles indexed in Thomson Scientific database Current Contents. The number of articles increased from 30 in 2000 to 76 in 2006, and the average impact factor of journals where these articles were published increased from 2.03 in 2000 to 2.89 in 2006. Twenty percent of articles (72/350) were published in the Croatian Medical Journal. Principal investigators of the 12 research projects receiving government grants published 0 to 8 articles related to the project topic in the 2002-2006 research grant cycle. The research grantees published 78 original research articles, with an average price per article of euro 29.210 euros. Although the number and impact factor of research articles published by clinical and life scientists from Split, Croatia, is increasing, it is still low when the number of scientists is taken into account. There should be better mechanisms of control and evaluation of research performance of government-funded research projects.

Ranking Iranian biomedical research centers according to H-variants (G, M, A, R) in Scopus and Web of Science.

PubMed

Mahmudi, Zoleikha; Tahamtan, Iman; Sedghi, Shahram; Roudbari, Masoud

2015-01-01

We conducted a comprehensive bibliometrics analysis to calculate the H, G, M, A and R indicators for all Iranian biomedical research centers (IBRCs) from the output of ISI Web of Science (WoS) and Scopus between 1991 and 2010. We compared the research performance of the research centers according to these indicators. This was a cross-sectional and descriptive-analytical study, conducted on 104 Iranian biomedical research centers between August and September 2011. We collected our data through Scopus and WoS. Pearson correlation coefficient between the scientometrics indicators was calculated using SPSS, version 16. The mean values of all indicators were higher in Scopus than in WoS. Drug Applied Research Center of Tabriz University of Medical Sciences had the highest number of publications in both WoS and Scopus databases. This research center along with Royan Institute received the highest number of citations in both Scopus and WoS, respectively. The highest correlation was seen between G and R (.998) in WoS and between G and R (.990) in Scopus. Furthermore, the highest overlap of the 10 top IBRCs was between G and H in WoS (100%) and between G-R (90%) and H-R (90%) in Scopus. Research centers affiliated to the top ranked Iranian medical universities obtained a better position with respect to the studied scientometrics indicators. All aforementioned indicators are important for ranking bibliometrics studies as they refer to different attributes of scientific output and citation aspects.

Direction-of-arrival estimation for co-located multiple-input multiple-output radar using structural sparsity Bayesian learning

NASA Astrophysics Data System (ADS)

Wen, Fang-Qing; Zhang, Gong; Ben, De

2015-11-01

This paper addresses the direction of arrival (DOA) estimation problem for the co-located multiple-input multiple-output (MIMO) radar with random arrays. The spatially distributed sparsity of the targets in the background makes compressive sensing (CS) desirable for DOA estimation. A spatial CS framework is presented, which links the DOA estimation problem to support recovery from a known over-complete dictionary. A modified statistical model is developed to accurately represent the intra-block correlation of the received signal. A structural sparsity Bayesian learning algorithm is proposed for the sparse recovery problem. The proposed algorithm, which exploits intra-signal correlation, is capable being applied to limited data support and low signal-to-noise ratio (SNR) scene. Furthermore, the proposed algorithm has less computation load compared to the classical Bayesian algorithm. Simulation results show that the proposed algorithm has a more accurate DOA estimation than the traditional multiple signal classification (MUSIC) algorithm and other CS recovery algorithms. Project supported by the National Natural Science Foundation of China (Grant Nos. 61071163, 61271327, and 61471191), the Funding for Outstanding Doctoral Dissertation in Nanjing University of Aeronautics and Astronautics, China (Grant No. BCXJ14-08), the Funding of Innovation Program for Graduate Education of Jiangsu Province, China (Grant No. KYLX 0277), the Fundamental Research Funds for the Central Universities, China (Grant No. 3082015NP2015504), and the Priority Academic Program Development of Jiangsu Higher Education Institutions (PADA), China.

The JAK-STAT signaling pathway: input and output integration.

PubMed

Murray, Peter J

2007-03-01

Universal and essential to cytokine receptor signaling, the JAK-STAT pathway is one of the best understood signal transduction cascades. Almost 40 cytokine receptors signal through combinations of four JAK and seven STAT family members, suggesting commonality across the JAK-STAT signaling system. Despite intense study, there remain substantial gaps in understanding how the cascades are activated and regulated. Using the examples of the IL-6 and IL-10 receptors, I will discuss how diverse outcomes in gene expression result from regulatory events that effect the JAK1-STAT3 pathway, common to both receptors. I also consider receptor preferences by different STATs and interpretive problems in the use of STAT-deficient cells and mice. Finally, I consider how the suppressor of cytokine signaling (SOCS) proteins regulate the quality and quantity of STAT signals from cytokine receptors. New data suggests that SOCS proteins introduce additional diversity into the JAK-STAT pathway by adjusting the output of activated STATs that alters downstream gene activation.

Input-output Transfer Function Analysis of a Photometer Circuit Based on an Operational Amplifier.

PubMed

Hernandez, Wilmar

2008-01-09

In this paper an input-output transfer function analysis based on the frequencyresponse of a photometer circuit based on operational amplifier (op amp) is carried out. Opamps are universally used in monitoring photodetectors and there are a variety of amplifierconnections for this purpose. However, the electronic circuits that are usually used to carryout the signal treatment in photometer circuits introduce some limitations in theperformance of the photometers that influence the selection of the op amps and otherelectronic devices. For example, the bandwidth, slew-rate, noise, input impedance and gain,among other characteristics of the op amp, are often the performance limiting factors ofphotometer circuits. For this reason, in this paper a comparative analysis between twophotodiode amplifier circuits is carried out. One circuit is based on a conventional currentto-voltage converter connection and the other circuit is based on a robust current-to-voltageconverter connection. The results are satisfactory and show that the photodiode amplifierperformance can be improved by using robust control techniques.

Performance and Simulation of a Stand-alone Parabolic Trough Solar Thermal Power Plant

NASA Astrophysics Data System (ADS)

Mohammad, S. T.; Al-Kayiem, H. H.; Assadi, M. K.; Gilani, S. I. U. H.; Khlief, A. K.

2018-05-01

In this paper, a Simulink® Thermolib Model has been established for simulation performance evaluation of Stand-alone Parabolic Trough Solar Thermal Power Plant in Universiti Teknologi PETRONAS, Malaysia. This paper proposes a design of 1.2 kW parabolic trough power plant. The model is capable to predict temperatures at any system outlet in the plant, as well as the power output produced. The conditions that are taken into account as input to the model are: local solar radiation and ambient temperatures, which have been measured during the year. Other parameters that have been input to the model are the collector’s sizes, location in terms of latitude and altitude. Lastly, the results are presented in graphical manner to describe the analysed variations of various outputs of the solar fields obtained, and help to predict the performance of the plant. The developed model allows an initial evaluation of the viability and technical feasibility of any similar solar thermal power plant.

Radiation response and basic dosimetric characterisation of the ‘Magic Plate’

NASA Astrophysics Data System (ADS)

Alrowaili, Z. A.; Lerch, M.; Petasecca, M.; Carolan, M.; Rosenfeld, A.

2017-02-01

Two Dimensional (2D) silicon diode arrays are often implemented in radiation therapy quality assurance (QA) applications due to their advantages such as: real-time operation (compared to the films), large dynamic range and small size (compared to ionization chambers). The Centre for Medical Radiation Physics, University of Wollongong has developed a multifunctional 2D silicon diode array known as the Magic Plate (MP) for real-time applications and is suitable as a transmission detector for photon flunce mapping (MPTM) or for in phantom dose mapping (MPDM). The paper focusses on the characterisation of the MPDM in terms of output factor and square field beam profiling in 6 MV, 10 MV and 18 MV clinical photon fields. We have found excellent agreement with three different ion chambers for all measured parameters with output factors agreeing within 1.2% and field profiles agreeing within 3% and/or 3mm. This work has important implications for the development of the MP when operating in transmission mapping mode.

Acoustic Modeling for Aqua Ventus I off Monhegan Island, ME

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whiting, Jonathan M.; Hanna, Luke A.; DeChello, Nicole L.

2013-10-31

The DeepCwind consortium, led by the University of Maine, was awarded funding under the US Department of Energy’s Offshore Wind Advanced Technology Demonstration Program to develop two floating offshore wind turbines in the Gulf of Maine equipped with Goldwind 6 MW direct drive turbines, as the Aqua Ventus I project. The Goldwind turbines have a hub height of 100 m. The turbines will be deployed in Maine State waters, approximately 2.9 miles off Monhegan Island; Monhegan Island is located roughly 10 miles off the coast of Maine. In order to site and permit the offshore turbines, the acoustic output mustmore » be evaluated to ensure that the sound will not disturb residents on Monhegan Island, nor input sufficient sound levels into the nearby ocean to disturb marine mammals. This initial assessment of the acoustic output focuses on the sound of the turbines in air by modeling the assumed sound source level, applying a sound propagation model, and taking into account the distance from shore.« less

Mars Global Reference Atmospheric Model 2001 Version (Mars-GRAM 2001): Users Guide

NASA Technical Reports Server (NTRS)

Justus, C. G.; Johnson, D. L.

2001-01-01

This document presents Mars Global Reference Atmospheric Model 2001 Version (Mars-GRAM 2001) and its new features. As with the previous version (mars-2000), all parameterizations fro temperature, pressure, density, and winds versus height, latitude, longitude, time of day, and season (Ls) use input data tables from NASA Ames Mars General Circulation Model (MGCM) for the surface through 80-km altitude and the University of Arizona Mars Thermospheric General Circulation Model (MTGCM) for 80 to 70 km. Mars-GRAM 2001 is based on topography from the Mars Orbiter Laser Altimeter (MOLA) and includes new MGCM data at the topographic surface. A new auxiliary program allows Mars-GRAM output to be used to compute shortwave (solar) and longwave (thermal) radiation at the surface and top of atmosphere. This memorandum includes instructions on obtaining Mars-GRAN source code and data files and for running the program. It also provides sample input and output and an example for incorporating Mars-GRAM as an atmospheric subroutine in a trajectory code.

Positive Wigner functions render classical simulation of quantum computation efficient.

PubMed

Mari, A; Eisert, J

2012-12-07

We show that quantum circuits where the initial state and all the following quantum operations can be represented by positive Wigner functions can be classically efficiently simulated. This is true both for continuous-variable as well as discrete variable systems in odd prime dimensions, two cases which will be treated on entirely the same footing. Noting the fact that Clifford and Gaussian operations preserve the positivity of the Wigner function, our result generalizes the Gottesman-Knill theorem. Our algorithm provides a way of sampling from the output distribution of a computation or a simulation, including the efficient sampling from an approximate output distribution in the case of sampling imperfections for initial states, gates, or measurements. In this sense, this work highlights the role of the positive Wigner function as separating classically efficiently simulable systems from those that are potentially universal for quantum computing and simulation, and it emphasizes the role of negativity of the Wigner function as a computational resource.

Strategies for Diversifying the Pool of Graduate Students in Biomedical Sciences

PubMed Central

Coronado, Gloria D.; Shuster, Michele; Ulrich, Angie; Anderson, Jennifer; Loest, Helena

2012-01-01

As part of our National Cancer Institute–sponsored partnership between New Mexico State University and the Fred Hutchinson Cancer Research Center, we implemented the Cancer Research Internship for Undergraduate Students to expand the pipeline of underrepresented students who can conduct cancer-related research. A total of 21 students participated in the program from 2008 to 2011. Students were generally of senior standing (47%), female (90%), and Hispanic (85%). We present a logic model to describe the short-term, medium-term, and long-term outputs of the program. Comparisons of pre- and post-internship surveys showed significant improvements in short-term outputs including interest (p<0.001) and motivation (p<0.001) to attend graduate school, as well as preparedness to conduct research (p=0.01) and write a personal statement (p=0.04). Thirteen students were successfully tracked, and of the 9 who had earned a bachelor’s degree, 6 were admitted into a graduate program (67%), and 4 of these programs were in the biomedical sciences. PMID:22576869

Problems Discovery of Final Graduation Projects During the Software Development Processes

NASA Astrophysics Data System (ADS)

Al-Hagery, Mohammed Abdullah Hassan

2012-01-01

The traditional techniques and methods used by students during systems development at the College of Computer, Qassim University is leading to this study. It leads to identify problems that hinder the construction and development of information systems, and identify their causes. The most important stages of systems development are analysis and design, which represent a solid foundation to build strong systems that are free from errors. The motivation of this research is the existence of many problems that impede getting exact output after the development of systems by the university graduates within departments of computer. The research concentrates on discovering the problems during the development tasks. The required data were collected using a questionnaire method, which formulated and judged and distributed to the target population. The research results were analyzed by three statistic methods.

Environmental auditing in hospitals: approach and implementation in an university hospital.

PubMed

Dettenkofer, M; Kümmerer, K; Schuster, A; Mühlich, M; Scherrer, M; Daschner, F D

1997-05-01

Medical audit in infection control today is accepted as an important element in the quality assurance of health care. In contrast, environmental auditing, which was approved in 1993 by the Council of the European Communities for industry ("Eco-Management and Audit Scheme-EMAS), has not so far been used as a tool to control and reduce environmental pollution caused by medical care in hospitals. The aim of this study was to investigate, whether environmental auditing in hospitals is useful. This process should also be cost effective. In this paper, methodological and organizational issues are described. Initially an environmental review of activities at the University Hospital, Freiburg and an eco-analysis of the input and output were performed. The first results of the study and a critical discussion will be presented in another paper.

Comparison of universal approximators incorporating partial monotonicity by structure.

PubMed

Minin, Alexey; Velikova, Marina; Lang, Bernhard; Daniels, Hennie

2010-05-01

Neural networks applied in control loops and safety-critical domains have to meet more requirements than just the overall best function approximation. On the one hand, a small approximation error is required; on the other hand, the smoothness and the monotonicity of selected input-output relations have to be guaranteed. Otherwise, the stability of most of the control laws is lost. In this article we compare two neural network-based approaches incorporating partial monotonicity by structure, namely the Monotonic Multi-Layer Perceptron (MONMLP) network and the Monotonic MIN-MAX (MONMM) network. We show the universal approximation capabilities of both types of network for partially monotone functions. On a number of datasets, we investigate the advantages and disadvantages of these approaches related to approximation performance, training of the model and convergence. 2009 Elsevier Ltd. All rights reserved.

[Translation into Brazilian Portuguese and validation of the Work Limitations Questionnaire].

PubMed

de Soárez, Patrícia Coelho; Kowalski, Clarissa Campos Guaragna; Ferraz, Marcos Bosi; Ciconelli, Rozana Mesquita

2007-07-01

To translate into Brazilian Portuguese, cross-culturally adapt, and evaluate the psychometric properties, reliability, and validity of the Work Limitations Questionnaire (WLQ). This cross-sectional observational study was performed in 2005 and 2006 at the Hospital São Paulo/Escola Paulista de Medicina of the Federal University of São Paulo, Brazil. Data from 150 individuals who were employed at the time of the study were obtained using the WLQ, the SF-36 (a generic quality of life questionnaire), and the SRQ-20 (used to screen for mental disorders). The WLQ has 25 items, which are divided into four domains: time management, physical demands, mental-interpersonal demands, and output demands. The questionnaires were administered as interviews to individuals without a university education, and were self-administered to individuals with a university degree. Descriptive statistics were used to characterize the sample. The intraclass correlation coefficient and Cronbach's alpha were used to assess reliability (internal consistency, test-retest, interobserver, and intraobserver agreement). The Pearson's correlation coefficient was used to assess construct validity. The mean age of the subjects was 37.6 years (standard deviation, +/- 9.6 years), and 64.7% of the subjects were female. The mean number of years at the job held at the time of the interview was 8.6 (+/- 8.3 years); 60.7% of the subjects were satisfied with their job, and 94.0% had not missed work in the preceding two weeks. In comparison to completely healthy persons, the mean productivity loss reported by the study subjects was 4.2%. Interobserver agreement was significant and high (0.600 to 0.800) or very high (0.800 to 1.000) in all domains, except physical demands (r = 0.497, moderate agreement). Intraobserver agreement was not significant for the time management and physical demands domains. The correlations associated with intraobserver agreement were moderately significant (0.400 to 0.600). Internal consistency was very high (Cronbach's alpha = 0.800 to 1.000). There was a significant correlation between all the SF-36 questionnaire domains and the WLQ domains of time management, mental-interpersonal demands, and output demands as well as the WLQ index score. A positive correlation was also found between the WLQ domains of time management, mental-interpersonal demands, and output demands and a positive result (score >or= 7) on the SRQ-20. The Brazilian Portuguese version of the WLQ is a reliable and valid scale to assess the impact of health problems on the productivity of Brazilian workers.

Measuring Efficiency of Knowledge Production in Health Research Centers Using Data Envelopment Analysis (DEA): A Case Study in Iran.

PubMed

Amiri, Mohammad Meskarpour; Nasiri, Taha; Saadat, Seyed Hassan; Anabad, Hosein Amini; Ardakan, Payman Mahboobi

2016-11-01

Efficiency analysis is necessary in order to avoid waste of materials, energy, effort, money, and time during scientific research. Therefore, analyzing efficiency of knowledge production in health areas is necessary, especially for developing and in-transition countries. As the first step in this field, the aim of this study was the analysis of selected health research center efficiency using data envelopment analysis (DEA). This retrospective and applied study was conducted in 2015 using input and output data of 16 health research centers affiliated with a health sciences university in Iran during 2010-2014. The technical efficiency of health research centers was evaluated based on three basic data envelopment analysis (DEA) models: input-oriented, output-oriented, and hyperbolic-oriented. The input and output data of each health research center for years 2010-2014 were collected from the Iran Ministry of Health and Medical Education (MOHE) profile and analyzed by R software. The mean efficiency score in input-oriented, output-oriented, and hyperbolic-oriented models was 0.781, 0.671, and 0.798, respectively. Based on results of the study, half of the health research centers are operating below full efficiency, and about one-third of them are operating under the average efficiency level. There is also a large gap between health research center efficiency relative to each other. It is necessary for health research centers to improve their efficiency in knowledge production through better management of available resources. The higher level of efficiency in a significant number of health research centers is achievable through more efficient management of human resources and capital. Further research is needed to measure and follow the efficiency of knowledge production by health research centers around the world and over a period of time.

Oral glutamine in addition to parenteral nutrition improves mortality and the healing of high-output intestinal fistulas.

PubMed

de Aguilar-Nascimento, J E; Caporossi, C; Dock-Nascimento, D Borges; de Arruda, I S; Moreno, K; Moreno, W

2007-01-01

Anastomotic leakage is one of the most important causes of morbidity and mortality in gastrointestinal surgery. We investigated the effect of oral glutamine on the healing of high-output intestinal fistula. A tertiary Universitary Hospital of the University of Mato Grosso, Cuiaba, Brazil. 28 patients (25 males and 3 females; median age = 45 [18-71] years old) admitted with high output post-operative small bowel fistulas (median volume in 24 h: 850 [600-2,200] mL) during a 4 years period were retrospectively studied. In the first two years 19 (67.9%) patients received only TPN as the initial nutritional support. In the last two years however, due to a change in the protocol for the nutritional support in cases of intestinal fistula 9 patients (32.1%) received oral glutamine (0.3 g/kg/day; 150 mL/day) in addition to TPN. Endpoints of the study were mortality, resolution of the fistula, and length of hospital stay (LOS). The overall mortality was 46.4% (13 patients). Fistula closure was observed in all other 15 patients (53.6%) that survived. In the subset of survived patients LOS was similar in those who received or not received glutamine. The multivariate regression analysis showed that resolution of the fistula was 13 times greater in patients that received oral glutamine (OR = 13.2 (95% CI = 1.1-160.5); p = 0.04) and 15 times greater in non-malnourished patients (OR = 15.4 [95% CI = 1.1-215.5]; p = 0.04). We conclude that oral glutamine accelerated the healing and diminished the mortality in this series of patients with post-operative high-output intestinal fistula receiving TPN.

Carbonyl compounds in electronic cigarette vapors: effects of nicotine solvent and battery output voltage.

PubMed

Kosmider, Leon; Sobczak, Andrzej; Fik, Maciej; Knysak, Jakub; Zaciera, Marzena; Kurek, Jolanta; Goniewicz, Maciej Lukasz

2014-10-01

Glycerin (VG) and propylene glycol (PG) are the most common nicotine solvents used in e-cigarettes (ECs). It has been shown that at high temperatures both VG and PG undergo decomposition to low molecular carbonyl compounds, including the carcinogens formaldehyde and acetaldehyde. The aim of this study was to evaluate how various product characteristics, including nicotine solvent and battery output voltage, affect the levels of carbonyls in EC vapor. Twelve carbonyl compounds were measured in vapors from 10 commercially available nicotine solutions and from 3 control solutions composed of pure glycerin, pure propylene glycol, or a mixture of both solvents (50:50). EC battery output voltage was gradually modified from 3.2 to 4.8V. Carbonyl compounds were determined using the HPLC/DAD method. Formaldehyde and acetaldehyde were found in 8 of 13 samples. The amounts of formaldehyde and acetaldehyde in vapors from lower voltage EC were on average 13- and 807-fold lower than in tobacco smoke, respectively. The highest levels of carbonyls were observed in vapors generated from PG-based solutions. Increasing voltage from 3.2 to 4.8V resulted in a 4 to more than 200 times increase in formaldehyde, acetaldehyde, and acetone levels. The levels of formaldehyde in vapors from high-voltage device were in the range of levels reported in tobacco smoke. Vapors from EC contain toxic and carcinogenic carbonyl compounds. Both solvent and battery output voltage significantly affect levels of carbonyl compounds in EC vapors. High-voltage EC may expose users to high levels of carbonyl compounds. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Improvement of the course “Management of intellectual property” based on the mixed state contract in the field of scientific R&D

NASA Astrophysics Data System (ADS)

Yakovlev, D.; Ageev, A.; Yushkov, E.; Bogatyreova, M.

2017-01-01

Intellectual property (IP) is one of the forms of storing knowledge - intangible assets of knowledge economy. The translation of IP knowledge to the young generation is one of the challenges of nuclear knowledge management. At the NRNU MEPhI (National Research Nuclear University MEPhI), the subject is studied within the framework of the academic course “Management of intellectual property. The aim of the course is to train qualified specialists, ready to use modern methods of strategic management of IP in commercial firms. The article is devoted to the strengthening and transfer of IP rights for scientific output application in industry and commerce. The state remains the main source that finances all the significant developments in the field of science and technology. Therefore, the primary task is to effectively utilize the R&D output created at the expense of the Federal budget, both within the state order and the estimated budget financing. Currently, there exist contradictions in the area of strengthening and transfer of rights for R&D in the field of science. The newly borne concept dealing with the strengthening of IP rights for the scientific R&D output, centers on the theory of a mixed state contract and is conveniently integrated with the academic course mentioned. Knowledge itself takes the form of IP, as soon as it becomes formalized. The academic course when supplemented with various approaches to strengthening and transfer of IP rights for the scientific R&D output certainly gives a better understanding of the commercialization process of the intellectual capital and structures relevance to intellectual property. The research material is integrated with the educational process, and the academic course “Management of intellectual property” is designed both for economic and engineering specialties.

Evaluating the performance of a 50 kilowatt grid-connected photovoltaic system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chowdhury, B.H.; Muknahallipatn, S.; Cupal, J.J.

A 50-kilowatt solar photovoltaic (PV) system was built at the University of Wyoming (UW) in 1996. The system comprises of three sub-systems. The first sub-system, a 10 kW roof-integrated system is located on the roof of the Engineering Building. The second sub-system is a 5 kW rack-mounted, ballasted PV system located on another part of the roof. The third sub-system is a 35 kW shade structure and is located adjacent to the university's football stadium. The three sub-systems differ in their design strategy since each is being used for research and education at the university. Each sub-system, being located atmore » some distance away from one another, supplies a different part of the campus grid. Efforts are continuing for setting up a central monitoring system, which will receive data remotely from all locations. A part of this monitoring system is complete. The system as configured provides a great deal of flexibility, which is in turn demanded by the variety of signal types measured at each installation. Each installation requires measurement of multiple dc and ac voltages and currents and one slowly varying voltage (proportional to solar insolation). The simultaneous sampling, fast sample rate, and lowpass signal conditioning allow for accurate measurement of power factor and total harmonic distortion of the inverter outputs. Panel and inverter efficiencies can be determined via simultaneous DC and AC measurements. These performance monitors provide the essential data for characterization of the PV effect at the grid input, and enable the use of intelligent power factor correction and harmonic filtering. Monitoring of the system shows that the total harmonic distortion present in the ac power output is at or below the acceptable limit as recommended by IEEE 519-1992. The harmonic distortion worsens when the ac power reaches more than 3.8 kW. A number of reliability problems with PV modules and inverters have delayed full functionality of the system.« less

A Cost Effective System Design Approach for Critical Space Systems

NASA Technical Reports Server (NTRS)

Abbott, Larry Wayne; Cox, Gary; Nguyen, Hai

2000-01-01

NASA-JSC required an avionics platform capable of serving a wide range of applications in a cost-effective manner. In part, making the avionics platform cost effective means adhering to open standards and supporting the integration of COTS products with custom products. Inherently, operation in space requires low power, mass, and volume while retaining high performance, reconfigurability, scalability, and upgradability. The Universal Mini-Controller project is based on a modified PC/104-Plus architecture while maintaining full compatibility with standard COTS PC/104 products. The architecture consists of a library of building block modules, which can be mixed and matched to meet a specific application. A set of NASA developed core building blocks, processor card, analog input/output card, and a Mil-Std-1553 card, have been constructed to meet critical functions and unique interfaces. The design for the processor card is based on the PowerPC architecture. This architecture provides an excellent balance between power consumption and performance, and has an upgrade path to the forthcoming radiation hardened PowerPC processor. The processor card, which makes extensive use of surface mount technology, has a 166 MHz PowerPC 603e processor, 32 Mbytes of error detected and corrected RAM, 8 Mbytes of Flash, and I Mbytes of EPROM, on a single PC/104-Plus card. Similar densities have been achieved with the quad channel Mil-Std-1553 card and the analog input/output cards. The power management built into the processor and its peripheral chip allows the power and performance of the system to be adjusted to meet the requirements of the application, allowing another dimension to the flexibility of the Universal Mini-Controller. Unique mechanical packaging allows the Universal Mini-Controller to accommodate standard COTS and custom oversized PC/104-Plus cards. This mechanical packaging also provides thermal management via conductive cooling of COTS boards, which are typically designed for convection cooling methods.

Epidemiology in Latin America and the Caribbean: current situation and challenges

PubMed Central

Barreto, Sandhi M; Miranda, Jaime J; Figueroa, J Peter; Schmidt, Maria Inês; Munoz, Sergio; Kuri-Morales, P Pablo; Silva, Jarbas B

2012-01-01

Background This article analyses the epidemiological research developments in Latin America and the Caribbean (LAC). It integrates the series commissioned by the International Epidemiological Association to all WHO Regions to identify global opportunities to promote the development of epidemiology. Methods Health situations of the regions were analysed based on published data on selected mortality, morbidity and risk factors. Epidemiological publication output by country was estimated by Medline bibliometrics. Internet and literature searches and data provided by key informants were used to describe perspectives on epidemiological training, research and funding. Findings Despite important advances in recent decades, LAC remains the world's most unequal region. In 2010, 10% of the LAC's people still lived in conditions of multidimensional poverty, with huge variation among countries. The region has experienced fast and complex epidemiological changes in past decades, combining increasing rates of non-communicable diseases and injuries, and keeping uncontrolled many existing endemic and emerging diseases. Overall, epidemiological publications per year increased from 160 articles between 1961 and 1970 to 2492 between 2001 and 2010. The increase in papers per million inhabitants in the past three decades varied from 57% in Panama to 1339% in Paraguay. Universities are the main epidemiological training providers. There are at least 34 universities and other institutions in the region that offer postgraduate programmes at the master’s and doctoral levels in epidemiology or public health. Most LAC countries rely largely on external funding and donors to initiate and sustain long-term research efforts. Despite the limited resources, the critical mass of LAC researchers has produced significant scientific contributions. Future needs The health research panorama of the region shows enormous regional discrepancies, but great prospects. Improving research and human resources capacity in the region will require establishing research partnerships within and outside the region, between rich and poor countries, promoting collaborations between LAC research institutions and universities to boost postgraduate programmes and aligning research investments and outputs with the current burden of disease. PMID:22407860

Epidemiology in Latin America and the Caribbean: current situation and challenges.

PubMed

Barreto, Sandhi M; Miranda, Jaime J; Figueroa, J Peter; Schmidt, Maria Inês; Munoz, Sergio; Kuri-Morales, P Pablo; Silva, Jarbas B

2012-04-01

This article analyses the epidemiological research developments in Latin America and the Caribbean (LAC). It integrates the series commissioned by the International Epidemiological Association to all WHO Regions to identify global opportunities to promote the development of epidemiology. Health situations of the regions were analysed based on published data on selected mortality, morbidity and risk factors. Epidemiological publication output by country was estimated by Medline bibliometrics. Internet and literature searches and data provided by key informants were used to describe perspectives on epidemiological training, research and funding. Despite important advances in recent decades, LAC remains the world's most unequal region. In 2010, 10% of the LAC's people still lived in conditions of multidimensional poverty, with huge variation among countries. The region has experienced fast and complex epidemiological changes in past decades, combining increasing rates of non-communicable diseases and injuries, and keeping uncontrolled many existing endemic and emerging diseases. Overall, epidemiological publications per year increased from 160 articles between 1961 and 1970 to 2492 between 2001 and 2010. The increase in papers per million inhabitants in the past three decades varied from 57% in Panama to 1339% in Paraguay. Universities are the main epidemiological training providers. There are at least 34 universities and other institutions in the region that offer postgraduate programmes at the master's and doctoral levels in epidemiology or public health. Most LAC countries rely largely on external funding and donors to initiate and sustain long-term research efforts. Despite the limited resources, the critical mass of LAC researchers has produced significant scientific contributions. FUTURE NEEDS: The health research panorama of the region shows enormous regional discrepancies, but great prospects. Improving research and human resources capacity in the region will require establishing research partnerships within and outside the region, between rich and poor countries, promoting collaborations between LAC research institutions and universities to boost postgraduate programmes and aligning research investments and outputs with the current burden of disease.

A Faculty Development Program can result in an improvement of the quality and output in medical education, basic sciences and clinical research and patient care.

PubMed

Dieter, Peter Erich

2009-07-01

The Carl Gustav Carus Faculty of Medicine, University of Technology Dresden, Germany, was founded in 1993 after the reunification of Germany. In 1999, a reform process of medical education was started together with Harvard Medical International.The traditional teacher- and discipline-centred curriculum was displaced by a student-centred, interdisciplinary and integrative curriculum, which has been named Dresden Integrative Patient/Problem-Oriented Learning (DIPOL). The reform process was accompanied and supported by a parallel-ongoing Faculty Development Program. In 2004, a Quality Management Program in medical education was implemented, and in 2005 medical education received DIN EN ISO 9001:2000 certification. Quality Management Program and DIN EN ISO 9001:2000 certification were/are unique for the 34 medical schools in Germany.The students play a very important strategic role in all processes. They are members in all committees like the Faculty Board, the Board of Study Affairs (with equal representation) and the ongoing audits in the Quality Management Program. The Faculty Development program, including a reform in medical education, the establishment of the Quality Management program and the certification, resulted in an improvement of the quality and output of medical education and was accompanied in an improvement of the quality and output of basic sciences and clinical research and interdisciplinary patient care.

Novel applications of multitask learning and multiple output regression to multiple genetic trait prediction.

PubMed

He, Dan; Kuhn, David; Parida, Laxmi

2016-06-15

Given a set of biallelic molecular markers, such as SNPs, with genotype values encoded numerically on a collection of plant, animal or human samples, the goal of genetic trait prediction is to predict the quantitative trait values by simultaneously modeling all marker effects. Genetic trait prediction is usually represented as linear regression models. In many cases, for the same set of samples and markers, multiple traits are observed. Some of these traits might be correlated with each other. Therefore, modeling all the multiple traits together may improve the prediction accuracy. In this work, we view the multitrait prediction problem from a machine learning angle: as either a multitask learning problem or a multiple output regression problem, depending on whether different traits share the same genotype matrix or not. We then adapted multitask learning algorithms and multiple output regression algorithms to solve the multitrait prediction problem. We proposed a few strategies to improve the least square error of the prediction from these algorithms. Our experiments show that modeling multiple traits together could improve the prediction accuracy for correlated traits. The programs we used are either public or directly from the referred authors, such as MALSAR (http://www.public.asu.edu/~jye02/Software/MALSAR/) package. The Avocado data set has not been published yet and is available upon request. dhe@us.ibm.com. © The Author 2016. Published by Oxford University Press.

The Economic Consequences Of Mortality Amenable To High-Quality Health Care In Low- And Middle-Income Countries.

PubMed

Alkire, Blake C; Peters, Alexander W; Shrime, Mark G; Meara, John G

2018-06-01

We estimated deaths amenable to high-quality health care globally and then modeled the macroeconomic impact in low- and middle-income countries using two macroeconomic perspectives: a value-of-lost-output approach to project gross domestic product (GDP) losses annually for the period 2015-30, and a value-of-lost-welfare approach to estimate the present value of total economic welfare losses in 2015. We estimated that eight million amenable deaths occurred in 2015, 96 percent of them in low- and middle-income countries. The value of lost output resulted in a projected cumulative loss of $11.2 trillion in these countries during 2015-30, with a potential economic output loss of up to 2.6 percent of GDP in low-income countries by 2030, compared to 0.9 percent in upper-middle-income countries. The value-of-lost-welfare approach estimated welfare losses of $6.0 trillion in 2015. Inadequate access to high-quality health care results in significant mortality and imposes a macroeconomic burden that is inequitably distributed, with the largest relative burden falling on low-income countries. Given that these deaths are unnecessary and the projected GDP losses are avoidable, there is a strong ethical and economic case for promoting high-quality health care as an essential component of universal health coverage.

Faculty research productivity in six Arab countries

NASA Astrophysics Data System (ADS)

Abouchedid, Kamal; Abdelnour, George

2015-10-01

This article analyses the research output of a sample of higher education institutions (HEIs) in six Arab countries in order to start quantifying academic research productivity in the wider region of the Middle East and North Africa (MENA). A questionnaire classifying HEIs was administered to 310 institutions in Lebanon, Qatar, the United Arab Emirates (UAE), Morocco, Saudi Arabia and Jordan. The study revealed a lack of capacity of HEIs to provide quality data, raising issues concerning institutional excellence and transparency. Those data which were available were analysed using a number of statistical methods. The result is that faculty research output in the Arab world is relatively low, confirming the existing notion of a lagging knowledge sector in the region. While traditional scholarship has focused on institutional factors such as budgetary allocation as one prime determinant of research productivity, this study claims that other factors need to be considered in explaining the low output, with broad implications for policy formulation. Such factors include overall satisfaction levels of academic staff, socialisation of faculty staff members into a research climate, and university mission vis-à-vis academic research. Given the distinct paucity of studies on faculty research productivity in HEIs in the Arab region, this study seeks to bridge this gap in the literature by providing original data derived from six Arab countries. The authors aim to provide a basis for further research into this topic.

Estimates of emergency operating capacity in U.S. manufacturing industries: 1994--2005

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belzer, D.B.

1997-02-01

To develop integrated policies for mobilization preparedness, planners require estimates and projections of available productive capacity during national emergency conditions. This report develops projections of national emergency operating capacity (EOC) for 458 US manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level. These measures are intended for use in planning models that are designed to predict the demands for detailed industry sectors that would occur under conditions such as a military mobilization or a major national disaster. This report is part of an ongoing series of studies prepared by the Pacific Northwest National Laboratory to support mobilization planning studiesmore » of the Federal Emergency Planning Agency/US Department of Defense (FEMA/DOD). Earlier sets of EOC estimates were developed in 1985 and 1991. This study presents estimates of EOC through 2005. As in the 1991 study, projections of capacity were based upon extrapolations of equipment capital stocks. The methodology uses time series regression models based on industry data to obtain a response function of industry capital stock to levels of industrial output. The distributed lag coefficients of these response function are then used with projected outputs to extrapolate the 1994 level of EOC. Projections of industrial outputs were taken from the intermediate-term forecast of the US economy prepared by INFORUM (Interindustry Forecasting Model, University of Maryland) in the spring of 1996.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sciarrino, Fabio; De Martini, Francesco

In several quantum information (QI) phenomena of large technological importance the information is carried by the phase of the quantum superposition states, or qubits. The phase-covariant cloning machine (PQCM) addresses precisely the problem of optimally copying these qubits with the largest attainable 'fidelity'. We present a general scheme which realizes the 1{yields}3 phase covariant cloning process by a combination of three different QI processes: the universal cloning, the NOT gate, and the projection over the symmetric subspace of the output qubits. The experimental implementation of a PQCM for polarization encoded qubits, the first ever realized with photons, is reported.

Inverters for interfacing of solar cells with the power grid

NASA Astrophysics Data System (ADS)

Karamanzanis, G. N.; Jackson, R. D.

In this work, based on a research course in the Engineering Dep. Cambridge University, some non-classical inverter circuits are studied. They can be used for interfacing solar cells with the power grid at low voltage (230V) and at low power level. They are based on d.c. choppers which have a fast switching transistor. Their theoretical efficiency is 100 percent and they provide a satisfactory output current waveform in phase to the a.c. line voltage. The problems of control are also studied using a suitable mathematical model.

Spacecraft optical disk recorder memory buffer control

NASA Technical Reports Server (NTRS)

Hodson, Robert F.

1992-01-01

The goal of this project is to develop an Application Specific Integrated Circuit (ASIC) for use in the control electronics of the Spacecraft Optical Disk Recorder (SODR). Specifically, this project is to design an extendable memory buffer controller ASIC for rate matching between a system Input/Output port and the SODR's device interface. The aforementioned goal can be partitioned into the following sub-goals: (1) completion of ASIC design and simulation (on-going via ASEE fellowship); (2) ASIC Fabrication (at ASIC manufacturer); and (3) ASIC Testing (NASA/LaRC, Christopher Newport University).

Initial test results from a prototype, 20 kW helium charged Stirling engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clarke, M.A.; Taylor, D.R.

An alpha-configuration, helium charged Stirling engine with a predicted output of 20 kW indicated power has been developed by a British consortium of universities and industrial companies. The work performed by the Royal Naval Engineering College has been in computer assisted design and component testing, with future plans for full engine trials during 1984/85. The scope of this paper is to outline the data obtained during motoring trials of the engine block and crankcase assembly, together with details of modifications incorporated in the various components.

International Symposium on Wind Energy Systems, Held at Cambridge University, on 7-9 September 1976

DTIC Science & Technology

1976-12-07

Darrieus turbine design. B.F. Blackwell, Sandia Laboratories, USA. Some design aspects of high-speed vertical- axis wind turbines . R.J. Templin and P...Energy, Energy Conversion, Power Systems, Windmills, Wind Turbines . 20. §6PAT(Cin~hW. "" aid. it 00e096 suf id""App hr 6Řb nwe) This report of qs brief...large wind turbines ocerating in lare arrays, and the output (with and without storage) of several such arrwef awhen geographically dispersed, has yet to

VLSI (Very Large Scale Integration) Design Tools, Reference Manual, Release 3.0.

DTIC Science & Technology

1985-08-01

generators/mult prior to running mult. The generated layout is output in directory 1ca in caesar cells with names of the form "caesarame*oca. Mut is a cft ...vlsa) spice(1.vlsi), User’s Guide to AML VLSI Dodgen Tools Reference Manual, UW/NW VLSI Consortium, University of Washington, (Christopher Terman, MIT...of the form ’caesarname..ca. Muls is a cft -based program and therefore also produces *.bd fiIls ’Caesaramew may not begin with the string mule. The

Sounding of the Ion Energization Region: Resolving Ambiguities

NASA Technical Reports Server (NTRS)

LaBelle, James

2003-01-01

Dartmouth College provided a single-channel high-frequency wave receiver to the Sounding of the Ion Energization Region: Resolving Ambiguities (SIERRA) rocket experiment launched from Poker Flat, Alaska, in January 2002. The receiver used signals from booms, probes, preamplifiers, and differential amplifiers provided by Cornell University coinvestigators. Output was to a dedicated 5 MHz telemetry link provided by WFF, with a small amount of additional Pulse Code Modulation (PCM) telemetry required for the receiver gain information. We also performed preliminary analysis of the data. The work completed is outlined below, in chronological order.

Neuromorphic Modeling of Moving Target Detection in Insects

DTIC Science & Technology

2007-12-31

E S 100 - 0. 50 - - -- 0- 0.0 0.5 1.0 1.5 2.0 2.5 30 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Time (s) Figure 4: Response of an SEMD to moving...D_v2Ift_std_rect_k3-1 p2 200- 1 5 0 -- -- -- - - -- - -- - - - - -- -- - - E 5 o o...governing differential equations are given in (3): x = input; z = output; Y = 1/2 (tanh[g (x - a)] + 1) O D E TANNER RESEARCH AND THE UNIVERSITY OF

The clinical pattern of diabetes Insipidus in a large university hospital in the Middle East.

PubMed

Babiker, Amir M I; Al Jurayyan, Nasir A M; Al Jurayyan, Rushaid N A; Al Gadi, Iman; Drop, Stenvert L S

2015-04-01

Diabetes insipidus is a rare but serious endocrine disorder. Paediatric patients were evaluated for polyuria at King Khalid University Hospital, Riyadh, Saudi Arabia, over a decade (2000-13). Relevant clinical examination and/or a triad of high serum osmolality, hypernatremia and low urine osmolality due to increased urine output confirmed the diagnosis. Water deprivation test was required in some cases with non-classic presentations. Appropriate brain imaging was performed whenever central diabetes insipidus (CDI) was suspected. Twenty-eight patients, 15 males (53.6%) and 13 females (46.4%), aged 0-17 years (mean: 6 years) were included. The calculated period prevalence was 7 in 10,000. In our cohort, 60.7% (17 of 28 patients) had CDI, 21.4% (6 of 28) were diagnosed with nephrogenic diabetes insipidus (NDI) and 17.9% (5 of 30) had psychogenic polydipsia. CDI was due to variable aetiology. Though CDI was the commonest, NDI was not a rare encounter in our community, possibly because of high consanguineous marriages. © The Author [2015]. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The Online Bioinformatics Resources Collection at the University of Pittsburgh Health Sciences Library System--a one-stop gateway to online bioinformatics databases and software tools.

PubMed

Chen, Yi-Bu; Chattopadhyay, Ansuman; Bergen, Phillip; Gadd, Cynthia; Tannery, Nancy

2007-01-01

To bridge the gap between the rising information needs of biological and medical researchers and the rapidly growing number of online bioinformatics resources, we have created the Online Bioinformatics Resources Collection (OBRC) at the Health Sciences Library System (HSLS) at the University of Pittsburgh. The OBRC, containing 1542 major online bioinformatics databases and software tools, was constructed using the HSLS content management system built on the Zope Web application server. To enhance the output of search results, we further implemented the Vivísimo Clustering Engine, which automatically organizes the search results into categories created dynamically based on the textual information of the retrieved records. As the largest online collection of its kind and the only one with advanced search results clustering, OBRC is aimed at becoming a one-stop guided information gateway to the major bioinformatics databases and software tools on the Web. OBRC is available at the University of Pittsburgh's HSLS Web site (http://www.hsls.pitt.edu/guides/genetics/obrc).

Efficient and universal quantum key distribution based on chaos and middleware

NASA Astrophysics Data System (ADS)

Jiang, Dong; Chen, Yuanyuan; Gu, Xuemei; Xie, Ling; Chen, Lijun

2017-01-01

Quantum key distribution (QKD) promises unconditionally secure communications, however, the low bit rate of QKD cannot meet the requirements of high-speed applications. Despite the many solutions that have been proposed in recent years, they are neither efficient to generate the secret keys nor compatible with other QKD systems. This paper, based on chaotic cryptography and middleware technology, proposes an efficient and universal QKD protocol that can be directly deployed on top of any existing QKD system without modifying the underlying QKD protocol and optical platform. It initially takes the bit string generated by the QKD system as input, periodically updates the chaotic system, and efficiently outputs the bit sequences. Theoretical analysis and simulation results demonstrate that our protocol can efficiently increase the bit rate of the QKD system as well as securely generate bit sequences with perfect statistical properties. Compared with the existing methods, our protocol is more efficient and universal, it can be rapidly deployed on the QKD system to increase the bit rate when the QKD system becomes the bottleneck of its communication system.

KSC-99pp0708

NASA Image and Video Library

1999-06-18

Inside the Vertical Processing Facility, the Chandra X-ray Observatory sits inside the payload canister, ready to be moved to Launch Pad 39B. Liftoff will take place no earlier than July 20 at 12:36 a.m. EDT aboard Space Shuttle Columbia, on mission STS-93. Chandra will allow scientists from around the world to obtain unprecedented X-ray images of exotic environments to help understand the structure and evolution of the universe. Chandra is expected to provide unique and crucial information on the nature of objects ranging from comets in our solar system to quasars at the edge of the observable universe, map the location of dark matter and help to identify it, and probe the faintest of active galaxies, allowing scientists to study not only how their energy output changes with time, but also how these objects produce their intense energy emissions in the first place. Since X-rays are absorbed by the Earth's atmosphere, space-based observatories are necessary to study these phenomena and allow scientists to analyze some of the greatest mysteries of the universe

KSC-99pp0709

NASA Image and Video Library

1999-06-18

Inside the Vertical Processing Facility, doors on the payload canister begin to close on the Chandra X-ray Observatory inside before being moved to Launch Pad 39B. Liftoff will take place no earlier than July 20 at 12:36 a.m. EDT aboard Space Shuttle Columbia, on mission STS-93. Chandra will allow scientists from around the world to obtain unprecedented X-ray images of exotic environments to help understand the structure and evolution of the universe. Chandra is expected to provide unique and crucial information on the nature of objects ranging from comets in our solar system to quasars at the edge of the observable universe, map the location of dark matter and help to identify it, and probe the faintest of active galaxies, allowing scientists to study not only how their energy output changes with time, but also how these objects produce their intense energy emissions in the first place. Since X-rays are absorbed by the Earth's atmosphere, space-based observatories are necessary to study these phenomena and allow scientists to analyze some of the greatest mysteries of the universe

Geographic trends of scientific output and citation practices in psychiatry.

PubMed

Igoumenou, Artemis; Ebmeier, Klaus; Roberts, Nia; Fazel, Seena

2014-12-06

Measures of research productivity are increasingly used to determine how research should be evaluated and funding decisions made. In psychiatry, citation patterns within and between countries are not known, and whether these differ by choice of citation metric. In this study, we examined publication characteristics and citation practices in articles published in 50 Web of Science indexed psychiatric and relevant clinical neurosciences journals, between January 2004 and December 2009 comprising 51,072 records that produced 375,962 citations. We compared citation patterns, including self-citations, between countries using standard x(2) tests. We found that most publications came from the USA, with Germany being second and UK third in productivity. USA articles received most citations and the highest citation rate with an average 11.5 citations per article. The UK received the second highest absolute number of citations, but came fourth by citation rate (9.7 citations/article), after the Netherlands (11.4 citations/article) and Canada (9.8 citations/article). Within the USA, Harvard University published most articles and these articles were the most cited, on average 20.0 citations per paper. In Europe, UK institutions published and were cited most often. The Institute of Psychiatry/Kings College London was the leading institution in terms of number of published records and overall citations, while Oxford University had the highest citation rate (18.5 citations/record). There were no differences between the self-citation practices of American and European researchers. Articles that examined some aspect of treatment in psychiatry were the most published. In terms of diagnosis, papers about schizophrenia-spectrum disorders were the most published and the most cited. We found large differences between and within countries in terms of their research productivity in psychiatry and clinical neuroscience. In addition, the ranking of countries and institutions differed widely by whether productivity was assessed by total research records published, overall citations these received, or citations per paper. The choice of measures of scientific output could be important in determining how research output translates into decisions about resource allocation.

TEA CO 2 Laser Simulator: A software tool to predict the output pulse characteristics of TEA CO 2 laser

NASA Astrophysics Data System (ADS)

Abdul Ghani, B.

2005-09-01

"TEA CO 2 Laser Simulator" has been designed to simulate the dynamic emission processes of the TEA CO 2 laser based on the six-temperature model. The program predicts the behavior of the laser output pulse (power, energy, pulse duration, delay time, FWHM, etc.) depending on the physical and geometrical input parameters (pressure ratio of gas mixture, reflecting area of the output mirror, media length, losses, filling and decay factors, etc.). Program summaryTitle of program: TEA_CO2 Catalogue identifier: ADVW Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVW Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Computer: P.IV DELL PC Setup: Atomic Energy Commission of Syria, Scientific Services Department, Mathematics and Informatics Division Operating system: MS-Windows 9x, 2000, XP Programming language: Delphi 6.0 No. of lines in distributed program, including test data, etc.: 47 315 No. of bytes in distributed program, including test data, etc.:7 681 109 Distribution format:tar.gz Classification: 15 Laser Physics Nature of the physical problem: "TEA CO 2 Laser Simulator" is a program that predicts the behavior of the laser output pulse by studying the effect of the physical and geometrical input parameters on the characteristics of the output laser pulse. The laser active medium consists of a CO 2-N 2-He gas mixture. Method of solution: Six-temperature model, for the dynamics emission of TEA CO 2 laser, has been adapted in order to predict the parameters of laser output pulses. A simulation of the laser electrical pumping was carried out using two approaches; empirical function equation (8) and differential equation (9). Typical running time: The program's running time mainly depends on both integration interval and step; for a 4 μs period of time and 0.001 μs integration step (defaults values used in the program), the running time will be about 4 seconds. Restrictions on the complexity: Using a very small integration step might leads to stop the program run due to the huge number of calculating points and to a small paging file size of the MS-Windows virtual memory. In such case, it is recommended to enlarge the paging file size to the appropriate size, or to use a bigger value of integration step.

Universal Linear Optics: An implementation of Boson Sampling on a Fully Reconfigurable Circuit

NASA Astrophysics Data System (ADS)

Harrold, Christopher; Carolan, Jacques; Sparrow, Chris; Russell, Nicholas J.; Silverstone, Joshua W.; Marshall, Graham D.; Thompson, Mark G.; Matthews, Jonathan C. F.; O'Brien, Jeremy L.; Laing, Anthony; Martín-López, Enrique; Shadbolt, Peter J.; Matsuda, Nobuyuki; Oguma, Manabu; Itoh, Mikitaka; Hashimoto, Toshikazu

Linear optics has paved the way for fundamental tests in quantum mechanics and has gone on to enable a broad range of quantum information processing applications for quantum technologies. We demonstrate an integrated photonics processor that is universal for linear optics. The device is a silica-on-silicon planar waveguide circuit (PLC) comprising a cascade of 15 Mach Zehnder interferometers, with 30 directional couplers and 30 tunable thermo-optic phase shifters which are electrically interfaced for the arbitrary setting of a phase. We input ensembles of up to six photons, and monitor the output with a 12-single-photon detector system. The calibrated device is capable of implementing any linear optical protocol. This enables the implementation of new quantum information processing tasks in seconds, which would have previously taken months to realise. We demonstrate 100 instances of the boson sampling problem with verification tests, and six-dimensional complex Hadamards. Also Imperial College London.

Porous Silicon as Antireflecting Layer

NASA Astrophysics Data System (ADS)

Kosoglu, Gulsen; Yumak, Mehmet; Okmen, Selim; Ozatay, Ozhan; Skarlatos, Yani; Garcia, Carlos

2013-03-01

The main aim in photovoltaic industry is to produce efficient and energy competitive solar cell modules at low cost. Efficient AntiReflection Coatings (ARC) improve light collection and thereby increase the current output of solar cells. Broadband ARCs are desirable for efficient application over the entire solar spectrum and porous silicon layers as antireflective coating layers provide successful light collection. In the study the most critical physical parameters of porous silicon are examined, homogeneous and uniform porous layers are produced. The photoluminescence spectrum and optical parameters of porous layers have been investigated, and we are now in the process of improving the efficiency of the device by modulating the structure of the porous silicon layers and studying its photovoltaic characteristics. We would like to thank to Mr. Aziz U. Caliskan and his group for their valuable support from TUBITAK YITAL. This Project is supported by Bogazici University Research Funding: 5782, TUBITAK Grant : 209T099, and Bogazici University Infrared Funding: 6121.

Research collaboration in groups and networks: differences across academic fields.

PubMed

Kyvik, Svein; Reymert, Ingvild

2017-01-01

The purpose of this paper is to give a macro-picture of collaboration in research groups and networks across all academic fields in Norwegian research universities, and to examine the relative importance of membership in groups and networks for individual publication output. To our knowledge, this is a new approach, which may provide valuable information on collaborative patterns in a particular national system, but of clear relevance to other national university systems. At the system level, conducting research in groups and networks are equally important, but there are large differences between academic fields. The research group is clearly most important in the field of medicine and health, while undertaking research in an international network is most important in the natural sciences. Membership in a research group and active participation in international networks are likely to enhance publication productivity and the quality of research.

Non-conventional expression systems for the production of vaccine proteins and immunotherapeutic molecules

PubMed Central

Legastelois, Isabelle; Buffin, Sophie; Peubez, Isabelle; Mignon, Charlotte; Sodoyer, Régis; Werle, Bettina

2017-01-01

ABSTRACT The increasing demand for recombinant vaccine antigens or immunotherapeutic molecules calls into question the universality of current protein expression systems. Vaccine production can require relatively low amounts of expressed materials, but represents an extremely diverse category consisting of different target antigens with marked structural differences. In contrast, monoclonal antibodies, by definition share key molecular characteristics and require a production system capable of very large outputs, which drives the quest for highly efficient and cost-effective systems. In discussing expression systems, the primary assumption is that a universal production platform for vaccines and immunotherapeutics will unlikely exist. This review provides an overview of the evolution of traditional expression systems, including mammalian cells, yeast and E.coli, but also alternative systems such as other bacteria than E. coli, transgenic animals, insect cells, plants and microalgae, Tetrahymena thermophila, Leishmania tarentolae, filamentous fungi, cell free systems, and the incorporation of non-natural amino acids. PMID:27905833

Universal quantum gates on electron-spin qubits with quantum dots inside single-side optical microcavities.

PubMed

Wei, Hai-Rui; Deng, Fu-Guo

2014-01-13

We present some compact quantum circuits for a deterministic quantum computing on electron-spin qubits assisted by quantum dots inside single-side optical microcavities, including the CNOT, Toffoli, and Fredkin gates. They are constructed by exploiting the giant optical Faraday rotation induced by a single-electron spin in a quantum dot inside a single-side optical microcavity as a result of cavity quantum electrodynamics. Our universal quantum gates have some advantages. First, all the gates are accomplished with a success probability of 100% in principle. Second, our schemes require no additional electron-spin qubits and they are achieved by some input-output processes of a single photon. Third, our circuits for these gates are simple and economic. Moreover, our devices for these gates work in both the weak coupling and the strong coupling regimes, and they are feasible in experiment.

Designing Ratchets in Ultra-cold Atoms for the Advanced Undergraduate Laboratory

NASA Astrophysics Data System (ADS)

Hachtel, Andrew; Gillette, Matthew; Clements, Ethan; Zhong, Shan; Ducay, Rey; Bali, Samir

2014-05-01

We propose to perform ratchet experiments in cold Rubidium atoms using state-of-the-art home-built tapered amplifier and imaging systems. Our tapered amplifier system amplifies the output from home-built external cavity tunable diode lasers up to a factor 100 and costs less than 5,000, in contrast to commercial tapered amplifier systems, which cost upward of 20,000. We have developed an imaging system with LabVIEW integration, which allows for approximately 2 millisecond exposures and microsecond control of experimental parameters. Our imaging system also costs less than 5,000 in comparison to commercial options, which cost between 40-50,000. Progress toward implementation of a one-dimensional rocking ratchet is described. We gratefully acknowledge funding from the American Chemical Society Petroleum Research Fund and Miami University. We also acknowledge the Miami University Instrumentation Laboratory for their invaluable contributions.

Universal method for crosstalk noise and transmission loss analysis for N-port nonblocking optical router for photonic networks-on-chip

NASA Astrophysics Data System (ADS)

Xie, Yiyuan; Zhang, Zhendong; Song, Tingting; He, Chao; Li, Jiachao; Wang, Guijin

2016-05-01

Crosstalk noise and transmission loss are two key elements in determining the performance of optical routers. We propose a universal method for crosstalk noise and transmission loss analysis for the N-port nonblocking optical router used in photonic networks-on-chip. Utilizing this method, we study the crosstalk noise and transmission loss for the five-, six-, seven-, and eight-port optical routers. We ascertain that the crosstalk noise and transmission loss are different for different input-output pairs. For the five-port optical router, the maximum crosstalk noise ranges from 0 to -7.07 dBm, and the transmission loss ranges from -9.05 to -0.51 dB. Furthermore, based on the crosstalk noise and transmission loss, we analyze optical signal-to-noise ratio (OSNR) and bit error ratio (BER) for the five-, six-, seven-, and eight-port nonblocking optical routers. As the number of ports increases, the minimum average OSNR decreases and the average BER increases. In addition, in order to present the performance of the routers more visually, a fiber-optic communications system is designed to simulate the transmission processes of the signals of the different paths of the routers in Optisystem. The results show that the power amplitude of the input signal is obviously higher than the corresponding output signal. With this method, we can easily evaluate the transmission loss, crosstalk noise, OSNR, and BER of high-radix nonblocking optical routers and conveniently study the performance of the N-port optical router.

Dynamic network data envelopment analysis for university hospitals evaluation

PubMed Central

Lobo, Maria Stella de Castro; Rodrigues, Henrique de Castro; André, Edgard Caires Gazzola; de Azeredo, Jônatas Almeida; Lins, Marcos Pereira Estellita

2016-01-01

ABSTRACT OBJECTIVE To develop an assessment tool to evaluate the efficiency of federal university general hospitals. METHODS Data envelopment analysis, a linear programming technique, creates a best practice frontier by comparing observed production given the amount of resources used. The model is output-oriented and considers variable returns to scale. Network data envelopment analysis considers link variables belonging to more than one dimension (in the model, medical residents, adjusted admissions, and research projects). Dynamic network data envelopment analysis uses carry-over variables (in the model, financing budget) to analyze frontier shift in subsequent years. Data were gathered from the information system of the Brazilian Ministry of Education (MEC), 2010-2013. RESULTS The mean scores for health care, teaching and research over the period were 58.0%, 86.0%, and 61.0%, respectively. In 2012, the best performance year, for all units to reach the frontier it would be necessary to have a mean increase of 65.0% in outpatient visits; 34.0% in admissions; 12.0% in undergraduate students; 13.0% in multi-professional residents; 48.0% in graduate students; 7.0% in research projects; besides a decrease of 9.0% in medical residents. In the same year, an increase of 0.9% in financing budget would be necessary to improve the care output frontier. In the dynamic evaluation, there was progress in teaching efficiency, oscillation in medical care and no variation in research. CONCLUSIONS The proposed model generates public health planning and programming parameters by estimating efficiency scores and making projections to reach the best practice frontier. PMID:27191158

Earth System Grid II (ESG): Turning Climate Model Datasets Into Community Resources

NASA Astrophysics Data System (ADS)

Williams, D.; Middleton, D.; Foster, I.; Nevedova, V.; Kesselman, C.; Chervenak, A.; Bharathi, S.; Drach, B.; Cinquni, L.; Brown, D.; Strand, G.; Fox, P.; Garcia, J.; Bernholdte, D.; Chanchio, K.; Pouchard, L.; Chen, M.; Shoshani, A.; Sim, A.

2003-12-01

High-resolution, long-duration simulations performed with advanced DOE SciDAC/NCAR climate models will produce tens of petabytes of output. To be useful, this output must be made available to global change impacts researchers nationwide, both at national laboratories and at universities, other research laboratories, and other institutions. To this end, we propose to create a new Earth System Grid, ESG-II - a virtual collaborative environment that links distributed centers, users, models, and data. ESG-II will provide scientists with virtual proximity to the distributed data and resources that they require to perform their research. The creation of this environment will significantly increase the scientific productivity of U.S. climate researchers by turning climate datasets into community resources. In creating ESG-II, we will integrate and extend a range of Grid and collaboratory technologies, including the DODS remote access protocols for environmental data, Globus Toolkit technologies for authentication, resource discovery, and resource access, and Data Grid technologies developed in other projects. We will develop new technologies for (1) creating and operating "filtering servers" capable of performing sophisticated analyses, and (2) delivering results to users. In so doing, we will simultaneously contribute to climate science and advance the state of the art in collaboratory technology. We expect our results to be useful to numerous other DOE projects. The three-year R&D program will be undertaken by a talented and experienced team of computer scientists at five laboratories (ANL, LBNL, LLNL, NCAR, ORNL) and one university (ISI), working in close collaboration with climate scientists at several sites.

Ranking Iranian biomedical research centers according to H-variants (G, M, A, R) in Scopus and Web of Science

PubMed Central

Mahmudi, Zoleikha; Tahamtan, Iman; Sedghi, Shahram; Roudbari, Masoud

2015-01-01

Background: We conducted a comprehensive bibliometrics analysis to calculate the H, G, M, A and R indicators for all Iranian biomedical research centers (IBRCs) from the output of ISI Web of Science (WoS) and Scopus between 1991 and 2010. We compared the research performance of the research centers according to these indicators. Methods: This was a cross-sectional and descriptive-analytical study, conducted on 104 Iranian biomedical research centers between August and September 2011. We collected our data through Scopus and WoS. Pearson correlation coefficient between the scientometrics indicators was calculated using SPSS, version 16. Results: The mean values of all indicators were higher in Scopus than in WoS. Drug Applied Research Center of Tabriz University of Medical Sciences had the highest number of publications in both WoS and Scopus databases. This research center along with Royan Institute received the highest number of citations in both Scopus and WoS, respectively. The highest correlation was seen between G and R (.998) in WoS and between G and R (.990) in Scopus. Furthermore, the highest overlap of the 10 top IBRCs was between G and H in WoS (100%) and between G-R (90%) and H-R (90%) in Scopus. Conclusion: Research centers affiliated to the top ranked Iranian medical universities obtained a better position with respect to the studied scientometrics indicators. All aforementioned indicators are important for ranking bibliometrics studies as they refer to different attributes of scientific output and citation aspects. PMID:26478875

Interfield dysbalances in research input and output benchmarking: Visualisation by density equalizing procedures

PubMed Central

Groneberg-Kloft, Beatrix; Kreiter, Carolin; Welte, Tobias; Fischer, Axel; Quarcoo, David; Scutaru, Cristian

2008-01-01

Background Historical, social and economic reasons can lead to major differences in the allocation of health system resources and research funding. These differences might endanger the progress in diagnostic and therapeutic approaches of socio-economic important diseases. The present study aimed to assess different benchmarking approaches that might be used to analyse these disproportions. Research in two categories was analysed for various output parameters and compared to input parameters. Germany was used as a high income model country. For the areas of cardiovascular and respiratory medicine density equalizing mapping procedures visualized major geographical differences in both input and output markers. Results An imbalance in the state financial input was present with 36 cardiovascular versus 8 respiratory medicine state-financed full clinical university departments at the C4/W3 salary level. The imbalance in financial input is paralleled by an imbalance in overall quantitative output figures: The 36 cardiology chairs published 2708 articles in comparison to 453 articles published by the 8 respiratory medicine chairs in the period between 2002 and 2006. This is a ratio of 75.2 articles per cardiology chair and 56.63 articles per respiratory medicine chair. A similar trend is also present in the qualitative measures. Here, the 2708 cardiology publications were cited 48337 times (7290 times for respiratory medicine) which is an average citation of 17.85 per publication vs. 16.09 for respiratory medicine. The average number of citations per cardiology chair was 1342.69 in contrast to 911.25 citations per respiratory medicine chair. Further comparison of the contribution of the 16 different German states revealed major geographical differences concerning numbers of chairs, published items, total number of citations and average citations. Conclusion Despite similar significances of cardiovascular and respiratory diseases for the global burden of disease, large input and output imbalances have been revealed in the present study which point to a need for changes in funding policies. The present study supplies data that could be used for decision making in the field of health systems funding. PMID:18724868

TKKMOD: A computer simulation program for an integrated wind diesel system. Version 1.0: Document and user guide

NASA Astrophysics Data System (ADS)

Manninen, L. M.

1993-12-01

The document describes TKKMOD, a simulation model developed at Helsinki University of Technology for a specific wind-diesel system layout, with special emphasis on the battery submodel and its use in simulation. The model has been included into the European wind-diesel modeling software package WDLTOOLS under the CEC JOULE project 'Engineering Design Tools for Wind-Diesel Systems' (JOUR-0078). WDLTOOLS serves as the user interface and processes the input and output data of different logistic simulation models developed by the project participants. TKKMOD cannot be run without this shell. The report only describes the simulation principles and model specific parameters of TKKMOD and gives model specific user instructions. The input and output data processing performed outside this model is described in the documentation of the shell. The simulation model is utilized for calculation of long-term performance of the reference system configuration for given wind and load conditions. The main results are energy flows, losses in the system components, diesel fuel consumption, and the number of diesel engine starts.

Unconstrained handwritten numeral recognition based on radial basis competitive and cooperative networks with spatio-temporal feature representation.

PubMed

Lee, S; Pan, J J

1996-01-01

This paper presents a new approach to representation and recognition of handwritten numerals. The approach first transforms a two-dimensional (2-D) spatial representation of a numeral into a three-dimensional (3-D) spatio-temporal representation by identifying the tracing sequence based on a set of heuristic rules acting as transformation operators. A multiresolution critical-point segmentation method is then proposed to extract local feature points, at varying degrees of scale and coarseness. A new neural network architecture, referred to as radial-basis competitive and cooperative network (RCCN), is presented especially for handwritten numeral recognition. RCCN is a globally competitive and locally cooperative network with the capability of self-organizing hidden units to progressively achieve desired network performance, and functions as a universal approximator of arbitrary input-output mappings. Three types of RCCNs are explored: input-space RCCN (IRCCN), output-space RCCN (ORCCN), and bidirectional RCCN (BRCCN). Experiments against handwritten zip code numerals acquired by the U.S. Postal Service indicated that the proposed method is robust in terms of variations, deformations, transformations, and corruption, achieving about 97% recognition rate.

Evaluation of Regression Models of Balance Calibration Data Using an Empirical Criterion

NASA Technical Reports Server (NTRS)

Ulbrich, Norbert; Volden, Thomas R.

2012-01-01

An empirical criterion for assessing the significance of individual terms of regression models of wind tunnel strain gage balance outputs is evaluated. The criterion is based on the percent contribution of a regression model term. It considers a term to be significant if its percent contribution exceeds the empirical threshold of 0.05%. The criterion has the advantage that it can easily be computed using the regression coefficients of the gage outputs and the load capacities of the balance. First, a definition of the empirical criterion is provided. Then, it is compared with an alternate statistical criterion that is widely used in regression analysis. Finally, calibration data sets from a variety of balances are used to illustrate the connection between the empirical and the statistical criterion. A review of these results indicated that the empirical criterion seems to be suitable for a crude assessment of the significance of a regression model term as the boundary between a significant and an insignificant term cannot be defined very well. Therefore, regression model term reduction should only be performed by using the more universally applicable statistical criterion.

Universal MOSFET parameter analyzer

NASA Astrophysics Data System (ADS)

Klekachev, A. V.; Kuznetsov, S. N.; Pikulev, V. B.; Gurtov, V. A.

2006-05-01

MOSFET analyzer is developed to extract most important parameters of transistors. Instead of routine DC transfer and output characteristics, analyzer provides an evaluation of interface states density by applying charge pumping technique. There are two features that outperform the analyzer among similar products of other vendors. It is compact (100 × 80 × 50 mm 3 in dimensions) and lightweight (< 200 gram) instrument with ultra low power supply (< 2.5 W). The analyzer operates under control of IBM PC by means of USB interface that simultaneously provides power supply. Owing to the USB-compatible microcontroller as the basic element, designed analyzer offers cost-effective solution for diverse applications. The enclosed software runs under Windows 98/2000/XP operating systems, it has convenient graphical interface simplifying measurements for untrained user. Operational characteristics of analyzer are as follows: gate and drain output voltage within limits of +/-10V measuring current range of 1pA ÷ 10 mA; lowest limit of interface states density characterization of ~10 9 cm -2 • eV -1. The instrument was designed on the base of component parts from CYPRESS and ANALOG DEVICES (USA).

Drilling Rig Operation Mode Recognition by an Artificial Neuronet

NASA Astrophysics Data System (ADS)

Abu-Abed, Fares; Borisov, Nikolay

2017-11-01

The article proposes a way to develop a drilling rig operation mode classifier specialized to recognize pre-emergency situations appearable in commercial oil-and-gas well drilling. The classifier is based on the theory of image recognition and artificial neuronet taught on real geological and technological information obtained while drilling. To teach the neuronet, a modified backpropagation algorithm that can teach to reach the global extremum of a target function has been proposed. The target function was a relative recognition error to minimize in the teaching. Two approaches to form the drilling rig pre-emergency situation classifier based on a taught neuronet have been considered. The first one involves forming an output classifier of N different signals, each of which corresponds to a single recognizable situation and, and can be formed on the basis of the analysis of M indications, that is using a uniform indication vocabulary for all recognized situations. The second way implements a universal classifier comprising N specialized ones, each of which can recognize a single pre-emergency situation and having a single output.

Regionalising MUSLE factors for application to a data-scarce catchment

NASA Astrophysics Data System (ADS)

Gwapedza, David; Slaughter, Andrew; Hughes, Denis; Mantel, Sukhmani

2018-04-01

The estimation of soil loss and sediment transport is important for effective management of catchments. A model for semi-arid catchments in southern Africa has been developed; however, simplification of the model parameters and further testing are required. Soil loss is calculated through the Modified Universal Soil Loss Equation (MUSLE). The aims of the current study were to: (1) regionalise the MUSLE erodibility factors and; (2) perform a sensitivity analysis and validate the soil loss outputs against independently-estimated measures. The regionalisation was developed using Geographic Information Systems (GIS) coverages. The model was applied to a high erosion semi-arid region in the Eastern Cape, South Africa. Sensitivity analysis indicated model outputs to be more sensitive to the vegetation cover factor. The simulated soil loss estimates of 40 t ha-1 yr-1 were within the range of estimates by previous studies. The outcome of the present research is a framework for parameter estimation for the MUSLE through regionalisation. This is part of the ongoing development of a model which can estimate soil loss and sediment delivery at broad spatial and temporal scales.

THz frequency multiplier chains base on planar Schottky diodes

NASA Technical Reports Server (NTRS)

Maiwald, F.; Schlecht, E.; Maestrini, A.; Chattopadhyay, G.; Pearson, J.; Pukala, D.; Mehdi, I.

2002-01-01

The Herschel Space Observatory (HSO), an ESA cornerstone mission with NASA contribution, will enable a comprehensive study of the galactic as well as the extra galactic universe. At the heart of this exploration are ultra sensitive coherent detectors that can allow for high-resolution spectroscopy. Successful operation of these receivers is predicated on providing a sufficiently powerful local oscillator (LO) source. Historically, a versatile space qualified LO source for frequencies beyond 500 GHz has been difficult if not impossible. This paper will focus on the effort under way to develop, build, characterize and qualify a LO chain to 1200 GHz (Band 5 on HSO) that is based on planar GaAs diodes mounted in waveguide circuits. State-of-the-art performance has been obtained from a three-stage ( x2 x 2 x 3 ) multiplier chain that can provide a peak output power of 120 uW (1178 GHz) at room temperature and a peak output power of 190 uW at 1183 GHz when cooled to 113 K. Implementation of this LO source for the Heterodyne Instrument for Far Infrared (HIFI) on HSO will be discussed in detail.

Mexican breast cancer research output, 2003-2012.

PubMed

Perez-Santos, Jose Luis Martin; Anaya-Ruiz, Maricruz

2013-01-01

The objetive of this study was to explore a bibliometric approach to quantitatively assess current research trends with regard to breast cancer in Mexico. Articles were analyzed by scientific output and research performances of individuals, institutes, and collaborative countries with Mexico. Data were retrieved from the Web of Science database from 2003 to 2012; this was searched using different terms related to breast cancer, including "breast cancer", "mammary ductal carcinoma" and "breast tumour". Data were then extracted from each file, transferred to Excel charts and visualised as diagrams. A total of 256 articles were retrieved. The institutions with the majority of publications were the National Autonomous University of Mexico (22.3%), the National Institute of Cancerology (21.9%), and Social Security Mexican Institute (20.3%); clinical observation studies were the dominant investigation type (64%), and the main types of research were metabolics (24.2%) and pathology (21.5%). This article demonstrates the usefulness of bibliometrics to address key evaluation questions and to establish priorities, define future areas of research, and develop breast cancer control strategies in Mexico.

R3D Align web server for global nucleotide to nucleotide alignments of RNA 3D structures.

PubMed

Rahrig, Ryan R; Petrov, Anton I; Leontis, Neocles B; Zirbel, Craig L

2013-07-01

The R3D Align web server provides online access to 'RNA 3D Align' (R3D Align), a method for producing accurate nucleotide-level structural alignments of RNA 3D structures. The web server provides a streamlined and intuitive interface, input data validation and output that is more extensive and easier to read and interpret than related servers. The R3D Align web server offers a unique Gallery of Featured Alignments, providing immediate access to pre-computed alignments of large RNA 3D structures, including all ribosomal RNAs, as well as guidance on effective use of the server and interpretation of the output. By accessing the non-redundant lists of RNA 3D structures provided by the Bowling Green State University RNA group, R3D Align connects users to structure files in the same equivalence class and the best-modeled representative structure from each group. The R3D Align web server is freely accessible at http://rna.bgsu.edu/r3dalign/.

Rapidly reconfigurable all-optical universal logic gate

DOEpatents

Goddard, Lynford L.; Bond, Tiziana C.; Kallman, Jeffrey S.

2010-09-07

A new reconfigurable cascadable all-optical on-chip device is presented. The gate operates by combining the Vernier effect with a novel effect, the gain-index lever, to help shift the dominant lasing mode from a mode where the laser light is output at one facet to a mode where it is output at the other facet. Since the laser remains above threshold, the speed of the gate for logic operations as well as for reprogramming the function of the gate is primarily limited to the small signal optical modulation speed of the laser, which can be on the order of up to about tens of GHz. The gate can be rapidly and repeatedly reprogrammed to perform any of the basic digital logic operations by using an appropriate analog optical or electrical signal at the gate selection port. Other all-optical functionality includes wavelength conversion, signal duplication, threshold switching, analog to digital conversion, digital to analog conversion, signal routing, and environment sensing. Since each gate can perform different operations, the functionality of such a cascaded circuit grows exponentially.

Flow in porous media, phase behavior and ultralow interfacial tensions: mechanisms of enhanced petroleum recovery. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, H.T.; Scriven, L.E.

1982-01-01

A major program of university research, longer-ranged and more fundamental in approach than industrial research, into basic mechanisms of enhancing petroleum recovery and into underlying physics, chemistry, geology, applied mathematics, computation, and engineering science has been built at Minnesota. The 1982 outputs of the interdisciplinary team of investigators were again ideas, instruments, techniques, data, understanding and skilled people: forty-one scientific and engineering papers in leading journals; four pioneering Ph.D. theses; numerous presentations to scientific and technical meetings, and to industrial, governmental and university laboratories; vigorous program of research visits to and from Minnesota; and two outstanding Ph.D.'s to research positionsmore » in the petroleum industry, one to a university faculty position, one to research leadership in a governmental institute. This report summarizes the 1982 papers and theses and features sixteen major accomplishments of the program during that year. Abstracts of all forty-five publications in the permanent literature are appended. Further details of information transfer and personnel exchange with industrial, governmental and university laboratories appear in 1982 Quarterly Reports available from the Department of Energy and are not reproduced here. The Minnesota program continues in 1983, notwithstanding earlier uncertainty about the DOE funding which finally materialized and is the bulk of support. Supplemental grants-in-aid from nine companies in the petroleum industry are important, as are the limited University and departmental contributions. 839 references, 172 figures, 29 tables.« less

Optimizing Wind Power Generation while Minimizing Wildlife Impacts in an Urban Area

PubMed Central

Bohrer, Gil; Zhu, Kunpeng; Jones, Robert L.; Curtis, Peter S.

2013-01-01

The location of a wind turbine is critical to its power output, which is strongly affected by the local wind field. Turbine operators typically seek locations with the best wind at the lowest level above ground since turbine height affects installation costs. In many urban applications, such as small-scale turbines owned by local communities or organizations, turbine placement is challenging because of limited available space and because the turbine often must be added without removing existing infrastructure, including buildings and trees. The need to minimize turbine hazard to wildlife compounds the challenge. We used an exclusion zone approach for turbine-placement optimization that incorporates spatially detailed maps of wind distribution and wildlife densities with power output predictions for the Ohio State University campus. We processed public GIS records and airborne lidar point-cloud data to develop a 3D map of all campus buildings and trees. High resolution large-eddy simulations and long-term wind climatology were combined to provide land-surface-affected 3D wind fields and the corresponding wind-power generation potential. This power prediction map was then combined with bird survey data. Our assessment predicts that exclusion of areas where bird numbers are highest will have modest effects on the availability of locations for power generation. The exclusion zone approach allows the incorporation of wildlife hazard in wind turbine siting and power output considerations in complex urban environments even when the quantitative interaction between wildlife behavior and turbine activity is unknown. PMID:23409117

Comparison of Minimally and More Invasive Methods of Determining Mixed Venous Oxygen Saturation.

PubMed

Smit, Marli; Levin, Andrew I; Coetzee, Johan F

2016-04-01

To investigate the accuracy of a minimally invasive, 2-step, lookup method for determining mixed venous oxygen saturation compared with conventional techniques. Single-center, prospective, nonrandomized, pilot study. Tertiary care hospital, university setting. Thirteen elective cardiac and vascular surgery patients. All participants received intra-arterial and pulmonary artery catheters. Minimally invasive oxygen consumption and cardiac output were measured using a metabolic module and lithium-calibrated arterial waveform analysis (LiDCO; LiDCO, London), respectively. For the minimally invasive method, Step 1 involved these minimally invasive measurements, and arterial oxygen content was entered into the Fick equation to calculate mixed venous oxygen content. Step 2 used an oxyhemoglobin curve spreadsheet to look up mixed venous oxygen saturation from the calculated mixed venous oxygen content. The conventional "invasive" technique used pulmonary artery intermittent thermodilution cardiac output, direct sampling of mixed venous and arterial blood, and the "reverse-Fick" method of calculating oxygen consumption. LiDCO overestimated thermodilution cardiac output by 26%. Pulmonary artery catheter-derived oxygen consumption underestimated metabolic module measurements by 27%. Mixed venous oxygen saturation differed between techniques; the calculated values underestimated the direct measurements by between 12% to 26.3%, this difference being statistically significant. The magnitude of the differences between the minimally invasive and invasive techniques was too great for the former to act as a surrogate of the latter and could adversely affect clinical decision making. Copyright © 2016 Elsevier Inc. All rights reserved.

Performance of a multilevel quantum heat engine of an ideal N-particle Fermi system.

PubMed

Wang, Rui; Wang, Jianhui; He, Jizhou; Ma, Yongli

2012-08-01

We generalize the quantum heat engine (QHE) model which was first proposed by Bender et al. [J. Phys. A 33, 4427 (2000)] to the case in which an ideal Fermi gas with an arbitrary number N of particles in a box trap is used as the working substance. Besides two quantum adiabatic processes, the engine model contains two isoenergetic processes, during which the particles are coupled to energy baths at a high constant energy E(h) and a low constant energy E(c), respectively. Directly employing the finite-time thermodynamics, we find that the power output is enhanced by increasing particle number N (or decreasing minimum trap size L(A)) for given L(A) (or N), without reduction in the efficiency. By use of global optimization, the efficiency at possible maximum power output (EPMP) is found to be universal and independent of any parameter contained in the engine model. For an engine model with any particle-number N, the efficiency at maximum power output (EMP) can be determined under the condition that it should be closest to the EPMP. Moreover, we extend the heat engine to a more general multilevel engine model with an arbitrary 1D power-law potential. Comparison between our engine model and the Carnot cycle shows that, under the same conditions, the efficiency η = 1 - E(c)/E(h) of the engine cycle is bounded from above the Carnot value η(c) =1 - T(c)/T(h).

A computer system to be used with laser-based endoscopy for quantitative diagnosis of early gastric cancer.

PubMed

Miyaki, Rie; Yoshida, Shigeto; Tanaka, Shinji; Kominami, Yoko; Sanomura, Yoji; Matsuo, Taiji; Oka, Shiro; Raytchev, Bisser; Tamaki, Toru; Koide, Tetsushi; Kaneda, Kazufumi; Yoshihara, Masaharu; Chayama, Kazuaki

2015-02-01

To evaluate the usefulness of a newly devised computer system for use with laser-based endoscopy in differentiating between early gastric cancer, reddened lesions, and surrounding tissue. Narrow-band imaging based on laser light illumination has come into recent use. We devised a support vector machine (SVM)-based analysis system to be used with the newly devised endoscopy system to quantitatively identify gastric cancer on images obtained by magnifying endoscopy with blue-laser imaging (BLI). We evaluated the usefulness of the computer system in combination with the new endoscopy system. We evaluated the system as applied to 100 consecutive early gastric cancers in 95 patients examined by BLI magnification at Hiroshima University Hospital. We produced a set of images from the 100 early gastric cancers; 40 flat or slightly depressed, small, reddened lesions; and surrounding tissues, and we attempted to identify gastric cancer, reddened lesions, and surrounding tissue quantitatively. The average SVM output value was 0.846 ± 0.220 for cancerous lesions, 0.381 ± 0.349 for reddened lesions, and 0.219 ± 0.277 for surrounding tissue, with the SVM output value for cancerous lesions being significantly greater than that for reddened lesions or surrounding tissue. The average SVM output value for differentiated-type cancer was 0.840 ± 0.207 and for undifferentiated-type cancer was 0.865 ± 0.259. Although further development is needed, we conclude that our computer-based analysis system used with BLI will identify gastric cancers quantitatively.

Applications of Mars Global Reference Atmospheric Model (Mars-GRAM 2005) Supporting Mission Site Selection for Mars Science Laboratory

NASA Technical Reports Server (NTRS)

Justh, Hilary L.; Justus, Carl G.

2008-01-01

The Mars Global Reference Atmospheric Model (Mars-GRAM 2005) is an engineering level atmospheric model widely used for diverse mission applications. An overview is presented of Mars-GRAM 2005 and its new features. One new feature of Mars-GRAM 2005 is the 'auxiliary profile' option. In this option, an input file of temperature and density versus altitude is used to replace mean atmospheric values from Mars-GRAM's conventional (General Circulation Model) climatology. An auxiliary profile can be generated from any source of data or alternate model output. Auxiliary profiles for this study were produced from mesoscale model output (Southwest Research Institute's Mars Regional Atmospheric Modeling System (MRAMS) model and Oregon State University's Mars mesoscale model (MMM5)model) and a global Thermal Emission Spectrometer(TES) database. The global TES database has been specifically generated for purposes of making Mars-GRAM auxiliary profiles. This data base contains averages and standard deviations of temperature, density, and thermal wind components,averaged over 5-by-5 degree latitude-longitude bins and 15 degree L(s) bins, for each of three Mars years of TES nadir data. Results are presented using auxiliary profiles produced from the mesoscale model output and TES observed data for candidate Mars Science Laboratory (MSL) landing sites. Input parameters rpscale (for density perturbations) and rwscale (for wind perturbations) can be used to "recalibrate" Mars-GRAM perturbation magnitudes to better replicate observed or mesoscale model variability.

Jack Reeves and his science.

PubMed

Moore, Lorna G; Grover, Robert F

2006-04-28

John T. (Jack) Reeves' science is reviewed across the 37 years of his research career at the University of Colorado Health Sciences Center, a period which occupied approximately half his remarkable life. His contributions centered on understanding the inter-relatedness as well as the underlying mechanisms controlling the various components of the O(2) transport system. We review here his studies on exercise performance; these encompassed about half his scientific output with the other half being devoted to the study of hypoxic pulmonary hypertension. Early studies concerned cardiac output, showing how it was a balance between O(2) uptake and O(2) extraction, and that cardiac output during exercise at high altitude was reduced, most likely because of decreased plasma volume and left ventricular filling. Jack's many studies addressed virtually every aspect of the O(2) transport system -- adding significantly to our understanding of the syndromes of altitude illness, the mechanisms by which ventilatory sensitivity to hypoxia and hypercapnia influenced ventilatory acclimatization, and the contributions of the various limbs of the autonomic nervous system on systemic blood pressure, vascular resistance and substrate utilization. His scientific career ended abruptly in 2004 when struck by a car while biking to work, but his legacy remains in his more than 385+ research articles or chapters, the 40+ fellows he trained, and the countless number of younger (and older) scientists for whom he served as a role model for learning how to scrutinize their data and present their findings in clear and sometimes bold prose. An integral man, he is sorely missed.

Optimizing wind power generation while minimizing wildlife impacts in an urban area.

PubMed

Bohrer, Gil; Zhu, Kunpeng; Jones, Robert L; Curtis, Peter S

2013-01-01

The location of a wind turbine is critical to its power output, which is strongly affected by the local wind field. Turbine operators typically seek locations with the best wind at the lowest level above ground since turbine height affects installation costs. In many urban applications, such as small-scale turbines owned by local communities or organizations, turbine placement is challenging because of limited available space and because the turbine often must be added without removing existing infrastructure, including buildings and trees. The need to minimize turbine hazard to wildlife compounds the challenge. We used an exclusion zone approach for turbine-placement optimization that incorporates spatially detailed maps of wind distribution and wildlife densities with power output predictions for the Ohio State University campus. We processed public GIS records and airborne lidar point-cloud data to develop a 3D map of all campus buildings and trees. High resolution large-eddy simulations and long-term wind climatology were combined to provide land-surface-affected 3D wind fields and the corresponding wind-power generation potential. This power prediction map was then combined with bird survey data. Our assessment predicts that exclusion of areas where bird numbers are highest will have modest effects on the availability of locations for power generation. The exclusion zone approach allows the incorporation of wildlife hazard in wind turbine siting and power output considerations in complex urban environments even when the quantitative interaction between wildlife behavior and turbine activity is unknown.

Strip biosensor for amplified detection of nerve growth factor-beta based on a molecular translator and catalytic DNA circuit.

PubMed

Liu, Jun; Lai, Ting; Mu, Kejie; Zhou, Zheng

2014-10-07

We have demonstrated a new visual detection approach based on a molecular translator and a catalytic DNA circuit for the detection of nerve growth factor-beta (NGF-β). In this assay, a molecular translator based on the binding-induced DNA strand-displacement reaction was employed to convert the input protein to an output DNA signal. The molecular translator is composed of a target recognition element and a signal output element. Target recognition is achieved by the binding of the anti-NGF-β antibody to the target protein. Polyclonal anti-NGF-β antibody is conjugated to DNA1 and DNA2. The antibody conjugated DNA1 is initially hybridized to DNA3 to form a stable DNA1/DNA3 duplex. In the presence of NGF-β, the binding of the same target protein brings DNA1 and DNA2 into close proximity, resulting in an increase in their local effective concentration. This process triggers the strand-displacement reaction between DNA2 and DNA3 and releases the output DNA3. The released DNA3 is further amplified by a catalytic DNA circuit. The product of the catalytic DNA circuit is detected by a strip biosensor. This proposed assay has high sensitivity and selectivity with a dynamic response ranging from 10 fM to 10 pM, and its detection limit is 10 fM of NGF-β. This work provides a sensitive, enzyme-free, and universal strategy for the detection of other proteins.

γ{\\hbox-}Flash suppression using a gated photomultiplier assembled with an LaBr3(Ce) detector to measure fast neutron capture reactions

NASA Astrophysics Data System (ADS)

Hara, K. Y.; Harada, H.; Toh, Y.; Hori, J.

2013-09-01

A gated photomultiplier tube (PMT) assembled with an LaBr3(Ce) detector was applied toward the prompt γ{hbox-}ray measurement of fast neutron capture reactions. Time-of-flight measurements of the neutron capture reactions of Cl and Al were performed using the 46-MeV electron linear accelerator at the Kyoto University Research Reactor Institute (KURRI) as a pulsed neutron source. The photomultiplier gating technique effectively suppressed the saturation of the PMT output and extended the energy region of the TOF measurement.

Using Software Zelio Soft in Educational Process to Simulation Control Programs for Intelligent Relays

NASA Astrophysics Data System (ADS)

Michalik, Peter; Mital, Dusan; Zajac, Jozef; Brezikova, Katarina; Duplak, Jan; Hatala, Michal; Radchenko, Svetlana

2016-10-01

Article deals with point to using intelligent relay and PLC systems in practice, to their architecture and principles of programming and simulations for education process on all types of school from secondary to universities. Aim of the article is proposal of simple examples of applications, where is demonstrated methodology of programming on real simple practice examples and shown using of chosen instructions. In practical part is described process of creating schemas and describing of function blocks, where are described methodologies of creating program and simulations of output reactions on changeable inputs for intelligent relays.

Gutenberg's Gift

NASA Astrophysics Data System (ADS)

Gingerich, O.

2007-10-01

Printing with movable type provided a great impetus for astronomy, both for preserving observations and for disseminating ideas. For example, Copernicus relied almost entirely on printed sources for the data needed in his De revolutionibus. Cheap textbooks helped bring knowledge of basic astronomy to a widening literate audience, in the university and beyond. Printed ephemerides were a major output from astronomers, and an examination of the accuracy of their positions shows us the gradual improvement in planetary theory. This ``show-and-tell talk" was illustrated with books from Prof. Gingerich's personal collection of early astronomy books, including his particularly extensive group of early ephemerides.

GPC: General Polygon Clipper library

NASA Astrophysics Data System (ADS)

Murta, Alan

2015-12-01

The University of Manchester GPC library is a flexible and highly robust polygon set operations library for use with C, C#, Delphi, Java, Perl, Python, Haskell, Lua, VB.Net and other applications. It supports difference, intersection, exclusive-or and union clip operations, and polygons may be comprised of multiple disjoint contours. Contour vertices may be given in any order - clockwise or anticlockwise, and contours may be convex, concave or self-intersecting, and may be nested (i.e. polygons may have holes). Output may take the form of either polygon contours or tristrips, and hole and external contours are differentiated in the result.

Simultaneous two-dimensional laser-induced-fluorescence measurements of argon ions.

PubMed

Hansen, A K; Galante, Matthew; McCarren, Dustin; Sears, Stephanie; Scime, E E

2010-10-01

Recent laser upgrades on the Hot Helicon Experiment at West Virginia University have enabled multiplexed simultaneous measurements of the ion velocity distribution function at a single location, expanding our capabilities in laser-induced fluorescence diagnostics. The laser output is split into two beams, each modulated with an optical chopper and injected perpendicular and parallel to the magnetic field. Light from the crossing point of the beams is transported to a narrow-band photomultiplier tube filtered at the fluorescence wavelength and monitored by two lock-in amplifiers, each referenced to one of the two chopper frequencies.

High Power Local Oscillator Sources for 1-2 THz

NASA Technical Reports Server (NTRS)

Mehdi, Imran; Thomas, Bertrand; Lin, Robert; Maestrini, Alain; Ward, John; Schlecht, Erich; Gill, John; Lee, Choonsup; Chattopadhyay, Goutam; Maiwald, Frank

2010-01-01

Recent results from the Heterodyne Instrument for Far-Infrared (HIFI) on the Herschel Space Telescope have confirmed the usefulness of high resolution spectroscopic data for a better understanding of our Universe. This paper will explore the current status of tunable local oscillator sources beyond HIFI and provide demonstration of how power combining of GaAs Schottky diodes can be used to increase both power and upper operating frequency for heterodyne receivers. Availability of power levels greater than 1 watt in the W-band now makes it possible to design a 1900 GHz source with more than 100 microwatts of expected output power.

Spectral properties of the Preisach hysteresis model with random input. II. Universality classes for symmetric elementary loops

NASA Astrophysics Data System (ADS)

Radons, Günter

2008-06-01

The Preisach model with symmetric elementary hysteresis loops and uncorrelated input is treated analytically in detail. It is shown that the appearance of long-time tails in the output correlations is a quite general feature of this model. The exponent η of the algebraic decay t-η , which may take any positive value, is determined by the tails of the input and the Preisach density. We identify the system classes leading to identical algebraic tails. These results imply the occurrence of 1/f noise for a large class of hysteretic systems.

The scientific production in health and biological sciences of the top 20 Brazilian universities.

PubMed

Zorzetto, R; Razzouk, D; Dubugras, M T B; Gerolin, J; Schor, N; Guimarães, J A; Mari, J J

2006-12-01

Brazilian scientific output exhibited a 4-fold increase in the last two decades because of the stability of the investment in research and development activities and of changes in the policies of the main funding agencies. Most of this production is concentrated in public universities and research institutes located in the richest part of the country. Among all areas of knowledge, the most productive are Health and Biological Sciences. During the 1998-2002 period these areas presented heterogeneous growth ranging from 4.5% (Pharmacology) to 191% (Psychiatry), with a median growth rate of 47.2%. In order to identify and rank the 20 most prolific institutions in these areas, searches were made in three databases (DataCAPES, ISI and MEDLINE) which permitted the identification of 109,507 original articles produced by the 592 Graduate Programs in Health and Biological Sciences offered by 118 public universities and research institutes. The 20 most productive centers, ranked according to the total number of ISI-indexed articles published during the 1998-2003 period, produced 78.7% of the papers in these areas and are strongly concentrated in the Southern part of the country, mainly in São Paulo State.

The E-music box: an empirical method for exploring the universal capacity for musical production and for social interaction through music.

PubMed

Novembre, Giacomo; Varlet, Manuel; Muawiyath, Shujau; Stevens, Catherine J; Keller, Peter E

2015-11-01

Humans are assumed to have a natural-universal-predisposition for making music and for musical interaction. Research in this domain is, however, typically conducted with musically trained individuals, and therefore confounded with expertise. Here, we present a rediscovered and updated invention-the E-music box-that we establish as an empirical method to investigate musical production and interaction in everyone. The E-music box transforms rotatory cyclical movements into pre-programmable digital musical output, with tempo varying according to rotation speed. The user's movements are coded as continuous oscillatory data, which can be analysed using linear or nonlinear analytical tools. We conducted a proof-of-principle experiment to demonstrate that, using this method, pairs of non-musically trained individuals can interact according to conventional musical practices (leader/follower roles and lower-pitch dominance). The results suggest that the E-music box brings 'active' and 'interactive' musical capacities within everyone's reach. We discuss the potential of this method for exploring the universal predisposition for music making and interaction in developmental and cross-cultural contexts, and for neurologic musical therapy and rehabilitation.

All-optical universal logic gates on nonlinear multimode interference coupler using tunable input intensity

NASA Astrophysics Data System (ADS)

Tajaldini, Mehdi; Jafri, Mohd Zubir Mat

2015-04-01

The theory of Nonlinear Modal Propagation Analysis Method (NMPA) have shown significant features of nonlinear multimode interference (MMI) coupler with compact dimension and when launched near the threshold of nonlinearity. Moreover, NMPA have the potential to allow studying the nonlinear MMI based the modal interference to explorer the phenomenon that what happen due to the natural of multimode region. Proposal of all-optical switch based NMPA has approved its capability to achieving the all-optical gates. All-optical gates have attracted increasing attention due to their practical utility in all-optical signal processing networks and systems. Nonlinear multimode interference devices could apply as universal all-optical gates due to significant features that NMPA introduce them. In this Paper, we present a novel Ultra-compact MMI coupler based on NMPA method in low intensity compared to last reports either as a novel design method and potential application for optical NAND, NOR as universal gates on single structure for Boolean logic signal processing devices and optimize their application via studding the contrast ratio between ON and OFF as a function of output width. We have applied NMPA for several applications so that the miniaturization in low nonlinear intensities is their main purpose.

Shapley value-based multi-objective data envelopment analysis application for assessing academic efficiency of university departments

NASA Astrophysics Data System (ADS)

Abing, Stephen Lloyd N.; Barton, Mercie Grace L.; Dumdum, Michael Gerard M.; Bongo, Miriam F.; Ocampo, Lanndon A.

2018-02-01

This paper adopts a modified approach of data envelopment analysis (DEA) to measure the academic efficiency of university departments. In real-world case studies, conventional DEA models often identify too many decision-making units (DMUs) as efficient. This occurs when the number of DMUs under evaluation is not large enough compared to the total number of decision variables. To overcome this limitation and reduce the number of decision variables, multi-objective data envelopment analysis (MODEA) approach previously presented in the literature is applied. The MODEA approach applies Shapley value as a cooperative game to determine the appropriate weights and efficiency score of each category of inputs. To illustrate the performance of the adopted approach, a case study is conducted in a university in the Philippines. The input variables are academic staff, non-academic staff, classrooms, laboratories, research grants, and department expenditures, while the output variables are the number of graduates and publications. The results of the case study revealed that all DMUs are inefficient. DMUs with efficiency scores close to the ideal efficiency score may be emulated by other DMUs with least efficiency scores.

Research Ranking of Iranian Universities of Medical Sciences Based on International Indicators: An Experience From I.R. of Iran.

PubMed

Baradaran Eftekhari, Monir; Sobhani, Zahra; Eltemasi, Masoumeh; Ghalenoee, Elham; Falahat, Katayoun; Habibi, Elham; Djalalinia, Shirin; Paykari, Niloofar; Ebadifar, Asghar; Akhondzadeh, Shahin

2017-11-01

In recent years, international ranking systems have been used by diverse users for various purposes. In most of these rankings, different aspects of performance of universities and research institutes, especially scientific performance, have been evaluated and ranked. In this article, we aimed to report the results of research ranking of Iranian universities of medical sciences (UMSs) based on some international indicators in 2015. In this study, after reviewing the research indicators of the majority of international ranking systems, with the participation of key stakeholders, we selected eight research indicators, namely research output, high-quality publications, leadership, total citations, citations per paper in 2015, papers per faculty member and h-index. The main sources for data gathering were Scopus, PubMed, and ISI, Web of Science. Data were extracted and normalized for Iranian governmental UMSs for 2015. A total of 18023 articles were indexed in 2015 in Scopus with affiliations of UMSs affiliation. Almost 17% of all articles were published in top journals and 15% were published with international collaborations. The maximum h-index (h-index = 110) belonged to Tehran University of Medical Sciences. The average paper per faculty member was 1.14 (Max = 2.5, Min = 0.13). The mean citation per published articles in Scopus was 0.33. Research ranking of Iranian UMSs can create favorable competition among them towards knowledge production.

A Balanced Scorecard for Open Innovation: Measuring the Impact of Industry-University Collaboration

NASA Astrophysics Data System (ADS)

Flores, Myrna; Al-Ashaab, Ahmed; Magyar, Andrea

The Balanced Scorecard (BSC) can be considered as a strategic measurement tool. Since its first publication by Norton and Kaplan in the early 1990’s, many companies have applied it to measure four key aspects of their organisations’ performance: Financial, Customer, Internal Business Process, Learning and Growth. Although it is widely used in the business arena, this original BSC was not developed to assess the impact of collaborative research projects under an open innovation strategy, where the outputs of research and development (R&D) developed by collaborative projects undertaken by industry and universities should be measured in a different way. In fact, many companies are losing important opportunities to spur their R&D results by not being able to quantify the results of such collaborations. Therefore, this paper will propose a Scorecard to measure the outcomes of collaborative research. It is important to recall that this scorecard has been developed during a collaborative research project by CEMEX Research Group AG (Switzerland) and Cranfield University (UK). During such project, a survey was developed to carry out eleven face-to-face interviews in a sample of ten companies in UK, which provided important inputs to design such strategic scorecard. It was confirmed that a collaborative balanced scorecard is a very useful tool to measure, track and improve the impact of conducting collaborative projects with universities.

Measuring Efficiency of Knowledge Production in Health Research Centers Using Data Envelopment Analysis (DEA): A Case Study in Iran

PubMed Central

Amiri, Mohammad Meskarpour; Nasiri, Taha; Saadat, Seyed Hassan; Anabad, Hosein Amini; Ardakan, Payman Mahboobi

2016-01-01

Introduction Efficiency analysis is necessary in order to avoid waste of materials, energy, effort, money, and time during scientific research. Therefore, analyzing efficiency of knowledge production in health areas is necessary, especially for developing and in-transition countries. As the first step in this field, the aim of this study was the analysis of selected health research center efficiency using data envelopment analysis (DEA). Methods This retrospective and applied study was conducted in 2015 using input and output data of 16 health research centers affiliated with a health sciences university in Iran during 2010–2014. The technical efficiency of health research centers was evaluated based on three basic data envelopment analysis (DEA) models: input-oriented, output-oriented, and hyperbolic-oriented. The input and output data of each health research center for years 2010–2014 were collected from the Iran Ministry of Health and Medical Education (MOHE) profile and analyzed by R software. Results The mean efficiency score in input-oriented, output-oriented, and hyperbolic-oriented models was 0.781, 0.671, and 0.798, respectively. Based on results of the study, half of the health research centers are operating below full efficiency, and about one-third of them are operating under the average efficiency level. There is also a large gap between health research center efficiency relative to each other. Conclusion It is necessary for health research centers to improve their efficiency in knowledge production through better management of available resources. The higher level of efficiency in a significant number of health research centers is achievable through more efficient management of human resources and capital. Further research is needed to measure and follow the efficiency of knowledge production by health research centers around the world and over a period of time. PMID:28344756

'Non-destructive' biocomputing security system based on gas-controlled biofuel cell and potentially used for intelligent medical diagnostics.

PubMed

Zhou, Ming; Zheng, Xiliang; Wang, Jin; Dong, Shaojun

2011-02-01

Biofuel cells (BFCs) based on enzymes and microbes are the promising future alternative sources of sustainable electrical energy under mild conditions (i.e. ambient temperature and neutral pH). By combining the adaptive behavior of BFCs self-regulating energy release with the versatility of biocomputing, we construct a novel gas-controlled biocomputing security system, which could be used as the potential implantable self-powered and 'smart' medical system with the logic diagnosis aim. We have demonstrated a biocomputing security system based on BFCs. Due to the unique 'RESET' reagent of N(2) applied in this work, the prepared biocomputing security system can be reset and cycled for a large number of times with no 'RESET' reagent-based 'waste'. This would be advantageous for the potential practical applications of such keypad lock as well as the development of biocomputing security devices. In order to validate the universality of the system and also to harvest energy directly from biofuels with enhanced power output, we replace the glucose with orange juice as the biofuel to operate BFCs-based biocomputing system, which also possesses the function of keypad lock. In addition, by introducing BFCs into the biocomputing security system, the adaptive behavior of the BFCs self-regulating the power release would be an immense advantage of such security keypad lock devices in potential self-powered implantable medical systems. The designed sequence gives the maximum power output and discriminate itself from the rest of the sequences. From this, we find that maximizing the dimensionless ratio of gap versus SD of the power output spectrum (a funnel in power outputs) gives the quantitative optimal design criterion. Therefore, our construction here may also provide a practical example and microscopic structural basis for mimicking the real biological network systems and bridge the gaps between the theoretical concepts and experiments important for biomolecular systems and synthetic biology.

Benchmarking the scientific output of industrial wastewater research in Arab world by utilizing bibliometric techniques.

PubMed

Zyoud, Shaher H; Al-Rawajfeh, Aiman E; Shaheen, Hafez Q; Fuchs-Hanusch, Daniela

2016-05-01

Rapid population growth, worsening of the climate, and severity of freshwater scarcity are global challenges. In Arab world countries, where water resources are becoming increasingly scarce, the recycling of industrial wastewater could improve the efficiency of freshwater use. The benchmarking of scientific output of industrial wastewater research in the Arab world is an initiative that could support in shaping up and improving future research activities. This study assesses the scientific output of industrial wastewater research in the Arab world. A total of 2032 documents related to industrial wastewater were retrieved from 152 journals indexed in the Scopus databases; this represents 3.6 % of the global research output. The h-index of the retrieved documents was 70. The total number of citations, at the time of data analysis, was 34,296 with an average citation of 16.88 per document. Egypt, with a total publications of 655 (32.2 %), was ranked the first among the Arab countries followed by Saudi Arabia 300 (14.7 %) and Tunisia 297 (14.6 %). Egypt also had the highest h-index, assumed with Saudi Arabia, the first place in collaboration with other countries. Seven hundred fifteen (35.2 %) documents with 66 countries in Arab/non-Arab country collaborations were identified. Arab researchers collaborated mostly with researchers from France 239 (11.7 %), followed by the USA 127 (6.2 %). The top active journal was Desalination 126 (6.2 %), and the most productive institution was the National Research Center, Egypt 169 (8.3 %), followed by the King Abdul-Aziz University, Saudi Arabia 75 (3.7 %). Environmental Science was the most prevalent field of interest 930 (45.8 %). Despite the promising indicators, there is a need to close the gap in research between the Arab world and the other nations. Optimizing the investments and developing regional experiences are key factors to promote the scientific research.

SU-F-T-160: Commissioning of a Single-Room Double-Scattering Proton Therapy System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, H; Ahmad, S; Chen, Y

2016-06-15

Purpose: To report the detailed commissioning experience for a compact double-scattering Mevion S250 proton therapy system at a University Cancer Center site. Methods: The commissioning of the proton therapy system mainly consisted of ensuring integrity of mechanical and imaging system, beam data collection, and commissioning of a treatment planning system (TPS). First, mechanical alignment and imaging were tested including safety, interlocks, positional accuracy of couch and gantry, image quality, mechanical and imaging isocenter and so on. Second, extensive beam data (outputs, PDDs, and profiles) were collected and analyzed through effective sampling of range (R) and modulation width (M) from 24more » beam options. Three different output (cGy/MU) prediction models were also commissioned as primary and secondary MU calculation tool. Third, the Varian Eclipse TPS was commissioned through five sets of data collections (in-water Bragg peak scans, in-air longitudinal fluence scans, in-air lateral profiles, in-air half-beam profiles, and an HU-to-stopping-power conversion curve) and accuracy of TPS calculation was tested using in-water scans and dose measurements with a 2D array detector with block and range compensator. Finally, an anthropomorphic phantom was scanned and heterogeneity effects were tested by inserting radiochromic films in the phantom and PET activation scans for range verification in conjunction with end-to-end test. Results: Beam characteristics agreed well with the vendor specifications; however, minor mismatches in R and M were found in some measurements during the beam data collection. These were reflected into the TPS commissioning such that the TPS could accurately predict the R and M within tolerance levels. The output models had a good agreement with measured outputs (<3% error). The end-to-end test using the film and PET showed reasonably the TPS predicted dose, R and M in heterogeneous medium. Conclusion: The proton therapy system was successfully commissioned and was released for clinical use.« less

[Publication performances of university clinics for anesthesiology: Germany, Austria and Switzerland from 2001 to 2010].

PubMed

Putzer, G; Ausserer, J; Wenzel, V; Pehböck, D; Widmann, T; Lindner, K; Hamm, P; Paal, P

2014-04-01

This study assessed the publication performance of university departments of anesthesiology in Austria, Germany and Switzerland. The number of publications, original articles, impact factors and citations were evaluated. A search was performed in PubMed to identify publications related to anesthesiology from 2001 to 2010. All articles from anesthesiology journals listed in the fields of anesthesia/pain therapy, critical care and emergency medicine by the "journal citation report 2013" in Thomson Reuters ISI web of knowledge were included. Articles from non-anaesthesiology journals, where the stem of the word anesthesia (anes*, anaes*, anäst*, anast*) appears in the affiliation field of PubMed, were included as well. The time periods 2001-2005 and 2006-2010 were compared. Articles were allocated to university departments in Austria, Germany and Switzerland via the affiliation field. A total of 45 university departments in Austria, Germany and Switzerland and 125,979 publications from 2,863 journals (65 anesthesiology journals, 2,798 non-anesthesiology journals) were analyzed. Of the publications 23 % could not be allocated to a given university department of anesthesiology. In the observation period the university department of anesthesiology in Berlin achieved most publications (n = 479) and impact points (1,384), whereas Vienna accumulated most original articles (n = 156). Austria had the most publications per million inhabitants in 2006-2010 (n=50) followed by Switzerland (n=49) and Germany (n=35). The number of publications during the observation period decreased in Germany (0.5 %), Austria (7 %) and Switzerland (8 %). Tables 2 and 4-8 of this article are available at Springer Link under Supplemental. The research performance varied among the university departments of anesthesiology in Germany, Austria and Switzerland whereby larger university departments, such as Berlin or Vienna published most. Publication output in Germany, Austria and Switzerland has decreased. Data processing in PubMed should be improved.

Delivery of Forecasted Atmospheric Ozone and Dust for the New Mexico Environmental Public Health Tracking System - An Open Source Geospatial Solution

NASA Astrophysics Data System (ADS)

Hudspeth, W. B.; Sanchez-Silva, R.; Cavner, J. A.

2010-12-01

New Mexico's Environmental Public Health Tracking System (EPHTS), funded by the Centers for Disease Control (CDC) Environmental Public Health Tracking Network (EPHTN), aims to improve health awareness and services by linking health effects data with levels and frequency of environmental exposure. As a public health decision-support system, EPHTS systems include: state-of-the-art statistical analysis tools; geospatial visualization tools; data discovery, extraction, and delivery tools; and environmental/public health linkage information. As part of its mandate, EPHTS issues public health advisories and forecasts of environmental conditions that have consequences for human health. Through a NASA-funded partnership between the University of New Mexico and the University of Arizona, NASA Earth Science results are fused into two existing models (the Dust Regional Atmospheric Model (DREAM) and the Community Multiscale Air Quality (CMAQ) model) in order to improve forecasts of atmospheric dust, ozone, and aerosols. The results and products derived from the outputs of these models are made available to an Open Source mapping component of the New Mexico EPHTS. In particular, these products are integrated into a Django content management system using GeoDjango, GeoAlchemy, and other OGC-compliant geospatial libraries written in the Python and C++ programming languages. Capabilities of the resultant mapping system include indicator-based thematic mapping, data delivery, and analytical capabilities. DREAM and CMAQ outputs can be inspected, via REST calls, through temporal and spatial subsetting of the atmospheric concentration data across analytical units employed by the public health community. This paper describes details of the architecture and integration of NASA Earth Science into the EPHTS decision-support system.

Power Policy 21 Century: Growth of the Population, Economics, Ecology and Entropy

NASA Astrophysics Data System (ADS)

Prisniakov, Vladimir

2002-01-01

but energy consumed by a man will be a limiting factor. Obtained values of changing in the quantity of population as well as of the consumed fuel quantity in the 21 century have been analysed. The period was defined (2005-2085) when energy hungry is possible due to a higher rate of a human reproduction comparing to the rates of energy consumption. From new position, the laws of the Earth population growth are analysed, based on the equality of the quantity of dying people to the quantity of those bornyears ago, whereis life expectancy. investigated on the base of Second law of thermodynamics. The equation of money exchange dY = (V/p)dM in going from quantity real GNP Y to consumption fuel equivalent E=pd Y takes the form: dE =VdM. General correlation between S and M is proposed: dS = (HV/T)dM, where H is enthalpy; V is velocity of money; T is temperature; p is total prices,is capacity of manufacture resources. This equation shows direction of the spontaneity development of economical processes as part of general law Universe. The original equation of removing from information to matter equation enables to control output natural resources by economic laws, and to control of activities for the restoration wrecked nature.This equation shows the direction of the spontaneity development of economical processes as part of a general Universal law. into account value of expenditure on ecology as part of price and overstated price indexes. The criterions allow to discover numerical values of a stock of money, ecology part of price, velocity of money, value of the taxes, which ensure sustainable development. These equations enable to control output natural resources by economic laws, and to control activities for the restoration of wrecked nature.

The NASA Lewis Research Center: An Economic Impact Study

NASA Technical Reports Server (NTRS)

Austrian, Ziona

1996-01-01

The NASA Lewis Research Center (LeRC), established in 1941, is one of ten NASA research centers in the country. It is situated on 350 acres of land in Cuyahoga County and occupies more than 140 buildings and over 500 specialized research and test facilities. Most of LeRC's facilities are located in the City of Cleveland; some are located within the boundaries of the cities of Fairview Park and Brookpark. LeRC is a lead center for NASA's research, technology, and development in the areas of aeropropulsion and selected space applications. It is a center of excellence for turbomachinery, microgravity fluid and combustion research, and commercial communication. The base research and technology disciplines which serve both aeronautics and space areas include materials and structures, instrumentation and controls, fluid physics, electronics, and computational fluid dynamics. This study investigates LeRC's economic impact on Northeast Ohio's economy. It was conducted by The Urban Center's Economic Development Program in Cleveland State University's Levin College of Urban Affairs. The study measures LeRC's direct impact on the local economy in terms of jobs, output, payroll, and taxes, as well as the indirect impact of these economic activities when they 'ripple' throughout the economy. To fully explain LeRC's overall impact on the region, its contributions in the areas of technology transfer and education are also examined. The study uses a highly credible and widely accepted research methodology. First, regional economic multipliers based on input-output models were used to estimate the effect of LERC spending on the Northeast Ohio economy. Second, the economic models were complemented by interviews with industrial, civic, and university leaders to qualitatively assess LeRC's impact in the areas of technology transfer and education.

Conservation physiology of marine fishes: state of the art and prospects for policy.

PubMed

McKenzie, David J; Axelsson, Michael; Chabot, Denis; Claireaux, Guy; Cooke, Steven J; Corner, Richard A; De Boeck, Gudrun; Domenici, Paolo; Guerreiro, Pedro M; Hamer, Bojan; Jørgensen, Christian; Killen, Shaun S; Lefevre, Sjannie; Marras, Stefano; Michaelidis, Basile; Nilsson, Göran E; Peck, Myron A; Perez-Ruzafa, Angel; Rijnsdorp, Adriaan D; Shiels, Holly A; Steffensen, John F; Svendsen, Jon C; Svendsen, Morten B S; Teal, Lorna R; van der Meer, Jaap; Wang, Tobias; Wilson, Jonathan M; Wilson, Rod W; Metcalfe, Julian D

2016-01-01

The state of the art of research on the environmental physiology of marine fishes is reviewed from the perspective of how it can contribute to conservation of biodiversity and fishery resources. A major constraint to application of physiological knowledge for conservation of marine fishes is the limited knowledge base; international collaboration is needed to study the environmental physiology of a wider range of species. Multifactorial field and laboratory studies on biomarkers hold promise to relate ecophysiology directly to habitat quality and population status. The 'Fry paradigm' could have broad applications for conservation physiology research if it provides a universal mechanism to link physiological function with ecological performance and population dynamics of fishes, through effects of abiotic conditions on aerobic metabolic scope. The available data indicate, however, that the paradigm is not universal, so further research is required on a wide diversity of species. Fish physiologists should interact closely with researchers developing ecological models, in order to investigate how integrating physiological information improves confidence in projecting effects of global change; for example, with mechanistic models that define habitat suitability based upon potential for aerobic scope or outputs of a dynamic energy budget. One major challenge to upscaling from physiology of individuals to the level of species and communities is incorporating intraspecific variation, which could be a crucial component of species' resilience to global change. Understanding what fishes do in the wild is also a challenge, but techniques of biotelemetry and biologging are providing novel information towards effective conservation. Overall, fish physiologists must strive to render research outputs more applicable to management and decision-making. There are various potential avenues for information flow, in the shorter term directly through biomarker studies and in the longer term by collaborating with modellers and fishery biologists.

Evaluation of Scientific Outputs of Kashan University of Medical Sciences in Scopus Citation Database based on Scopus, ResearchGate, and Mendeley Scientometric Measures

PubMed Central

Batooli, Zahra; Ravandi, Somaye Nadi; Bidgoli, Mohammad Sabahi

2016-01-01

Introduction It is essential to evaluate the impact of scientific publications through citation analysis in citation indexes. In addition, scientometric measures of social media also should be assessed. These measures include how many times the publications were read, viewed, and downloaded. The present study aimed to assess the scientific output of scholars at Kashan University of Medical Sciences by the end of March 2014 based on scientometric measures of Scopus, ResearchGate, and Mendeley. Methods A survey method was used to study the articles published in Scopus journals by scholars at Kashan University of Medical Sciences by the end of March 2014. The required data were collected from Scopus, ResearchGate, and Mendeley. The data were analyzed with descriptive statistics. Also, the Spearman correlation was used between the number of views of articles in ResearchGate with citation number of the articles in Scopus and reading frequency of the articles in Mendeley with citation number in Scopus were examined using the Spearman correlation in SPSS 16. Results Five-hundred and thirty-three articles were indexed in the Scopus Citation Database by the end of March 2014. Collectively, those articles were cited 1,315 times. The articles were covered by ResearchGate (74%) more than Mendeley (44%). In addition, 98% of the articles indexed in ResearchGate and 92% of the articles indexed in Mendeley were viewed at least once. The results showed that there was a positive correlation between the number of views of the articles in ResearchGate and Mendeley and the number of citations of the articles in Scopus. Conclusion Coverage and the number of visitors were higher in ResearchGate than in Mendeley. The increase in the number of views of articles in ResearchGate and Mendeley also increased the number of citations of the papers. Social networks, such as ResearchGate and Mendeley, also can be used as tools for the evaluation of academics and scholars based on the scientific research they have conducted. PMID:27054017

Internationalization of pediatric sleep apnea research.

PubMed

Milkov, Mario

2012-02-01

Recently, the socio-medical importance of obstructive sleep apnea in infancy and childhood increases worldwide. The present investigation aims at analyzing the dynamic science internationalization in this narrow field as reflected in three data-bases and at outlining the most significant scientists, institutions and primary information sources. A scientometric study of data from a retrospective problem-oriented search on pediatric sleep apnea in three data-bases such as Web of Science, MEDLINE and Scopus was carried out. A set of parameters of publication output and citations was followed-up. Several scientometric distributions were created and enabled the identification of some essential peculiarities of the international scientific communications. There was a steady world publication output increase. In 1972-2010, 4192 publications from 874 journals were abstracted in MEDLINE. In 1985-2010, more than 8100 authors from 64 countries published 3213 papers in 626 journals and 256 conference proceedings abstracted in Web of Science. In 1973-2010, 152 authors published 687 papers in 144 journals in 19 languages abstracted in Scopus. USA authors dominated followed by those from Australia and Canada. Sleep, Int. J. Pediatr. Otorhinolaryngol., Pediatr. Pulmonol. and Pediatrics belonged to 'core' journals concerning Web of Science and MEDLINE while Arch. Dis. Childh. and Eur. Respir. J. dominated in Scopus. Nine journals being currently published in 5 countries contained the terms of 'sleep' or 'sleeping' in their titles. David Gozal, Carole L. Marcus and Christian Guilleminault presented with most publications and citations to them. W.H. Dietz' paper published in Pediatrics in 1998 received 764 citations. Eighty-four authors from 11 countries participated in 16 scientific events held in 12 countries which were immediately devoted to sleep research. Their 13 articles were cited 170 times in Web of Science. Authors from the University of Louisville, Stanford University, and University of Pennsylvania published most papers on pediatric sleep apnea abstracted in these data-bases. The newly created data-base with the researchers' names, addresses and publications could be used by scientists from smaller countries for further improvement of their international collaboration. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Evaluation of Scientific Outputs of Kashan University of Medical Sciences in Scopus Citation Database based on Scopus, ResearchGate, and Mendeley Scientometric Measures.

PubMed

Batooli, Zahra; Ravandi, Somaye Nadi; Bidgoli, Mohammad Sabahi

2016-02-01

It is essential to evaluate the impact of scientific publications through citation analysis in citation indexes. In addition, scientometric measures of social media also should be assessed. These measures include how many times the publications were read, viewed, and downloaded. The present study aimed to assess the scientific output of scholars at Kashan University of Medical Sciences by the end of March 2014 based on scientometric measures of Scopus, ResearchGate, and Mendeley. A survey method was used to study the articles published in Scopus journals by scholars at Kashan University of Medical Sciences by the end of March 2014. The required data were collected from Scopus, ResearchGate, and Mendeley. The data were analyzed with descriptive statistics. Also, the Spearman correlation was used between the number of views of articles in ResearchGate with citation number of the articles in Scopus and reading frequency of the articles in Mendeley with citation number in Scopus were examined using the Spearman correlation in SPSS 16. Five-hundred and thirty-three articles were indexed in the Scopus Citation Database by the end of March 2014. Collectively, those articles were cited 1,315 times. The articles were covered by ResearchGate (74%) more than Mendeley (44%). In addition, 98% of the articles indexed in ResearchGate and 92% of the articles indexed in Mendeley were viewed at least once. The results showed that there was a positive correlation between the number of views of the articles in ResearchGate and Mendeley and the number of citations of the articles in Scopus. Coverage and the number of visitors were higher in ResearchGate than in Mendeley. The increase in the number of views of articles in ResearchGate and Mendeley also increased the number of citations of the papers. Social networks, such as ResearchGate and Mendeley, also can be used as tools for the evaluation of academics and scholars based on the scientific research they have conducted.

The UCAR Africa Initiative: Enabling African Solutions to African Needs

NASA Astrophysics Data System (ADS)

Pandya, R.; Bruintjes, R.; Foote, B.; Heck, S.; Hermann, S.; Hoswell, L.; Konate, M.; Kucera, P.; Laing, A.; Lamptey, B.; Moncrieff, M.; Ramamurthy, M.; Roberts, R.; Spangler, T.; Traoré, A.; Yoksas, T.; Warner, T.

2007-12-01

The University Corporation for Atmospheric Research (UCAR) Africa Initiative (AI) is a coordinated effort aimed at building sustainable partnerships between UCAR and African institutions in order to pursue research and applications for the benefit of the African people. The initiative is based on four fundamental operating principles, concisely summarized by the overall philosophy of enabling African solutions to African needs. The four principles are: • Collaborate with African institutions • Focus on institutional capacity building and research support • Explore science research themes critical to Africa and important for the world • Leverage the research infrastructure in UCAR to add value These principles are realized in a set of pilot activities, chosen for their high probability of short-term results and ability to set the stage for longer-term collaboration. The three pilot activities are listed below. 1. A modest radar network and data-distribution system in Mali and Burkina Faso, including a data-sharing MOU between the Mail and Burkina Faso Weather Services. 2. A partnership among UCAR, the Ghana Meteorological Agency, and the Ghana university community to develop an operational Weather Research and Forecasting (WRF) model for West Africa. The output is used by researchers and operational forecasters in Africa. Model output is also part of a demonstration project that aims to allow humanitarian agencies to share geo-referenced information in Africa via a web portal. 3. A workshop in Ouagadougou, Burkina Faso from April 2-6, 2007, with the theme Improving Lives by Understanding Weather. The workshop, co-organized with Programme SAAGA and the Commité Permanent Inter-Etats de Lutte Contre la Sécheresse dans le Sahel (CILSS), included over 80 participants from 18 countries, and produced a set of recommendations for continued collaboration. Our presentation will provide an update of these pilot activities and point to future directions. Recognizing that there are already a number of universities and government agencies leading efforts to contribute to atmospheric- science capacity building in Africa, we want to begin a discussion regarding how UCAR projects can align with such pre-existing efforts.

Real-Time Climate Simulations in the Interactive 3D Game Universe Sandbox ²

NASA Astrophysics Data System (ADS)

Goldenson, N. L.

2014-12-01

Exploration in an open-ended computer game is an engaging way to explore climate and climate change. Everyone can explore physical models with real-time visualization in the educational simulator Universe Sandbox ² (universesandbox.com/2), which includes basic climate simulations on planets. I have implemented a time-dependent, one-dimensional meridional heat transport energy balance model to run and be adjustable in real time in the midst of a larger simulated system. Universe Sandbox ² is based on the original game - at its core a gravity simulator - with other new physically-based content for stellar evolution, and handling collisions between bodies. Existing users are mostly science enthusiasts in informal settings. We believe that this is the first climate simulation to be implemented in a professionally developed computer game with modern 3D graphical output in real time. The type of simple climate model we've adopted helps us depict the seasonal cycle and the more drastic changes that come from changing the orbit or other external forcings. Users can alter the climate as the simulation is running by altering the star(s) in the simulation, dragging to change orbits and obliquity, adjusting the climate simulation parameters directly or changing other properties like CO2 concentration that affect the model parameters in representative ways. Ongoing visuals of the expansion and contraction of sea ice and snow-cover respond to the temperature calculations, and make it accessible to explore a variety of scenarios and intuitive to understand the output. Variables like temperature can also be graphed in real time. We balance computational constraints with the ability to capture the physical phenomena we wish to visualize, giving everyone access to a simple open-ended meridional energy balance climate simulation to explore and experiment with. The software lends itself to labs at a variety of levels about climate concepts including seasons, the Greenhouse effect, reservoirs and flows, albedo feedback, Snowball Earth, climate sensitivity, and model experiment design. Climate calculations are extended to Mars with some modifications to the Earth climate component, and could be used in lessons about the Mars atmosphere, and exploring scenarios of Mars climate history.

Systems approach to managing educational quality in the engineering classroom

NASA Astrophysics Data System (ADS)

Grygoryev, Kostyantyn

Today's competitive environment in post-secondary education requires universities to demonstrate the quality of their programs in order to attract financing, and student and academic talent. Despite significant efforts devoted to improving the quality of higher education, systematic, continuous performance measurement and management still have not reached the level where educational outputs and outcomes are actually produced---the classroom. An engineering classroom is a complex environment in which educational inputs are transformed by educational processes into educational outputs and outcomes. By treating a classroom as a system, one can apply tools such as Structural Equation Modeling, Statistical Process Control, and System Dynamics in order to discover cause-and-effect relationships among the classroom variables, control the classroom processes, and evaluate the effect of changes to the course organization, content, and delivery, on educational processes and outcomes. Quality improvement is best achieved through the continuous, systematic application of efforts and resources. Improving classroom processes and outcomes is an iterative process that starts with identifying opportunities for improvement, designing the action plan, implementing the changes, and evaluating their effects. Once the desired objectives are achieved, the quality improvement cycle may start again. The goal of this research was to improve the educational processes and outcomes in an undergraduate engineering management course taught at the University of Alberta. The author was involved with the course, first, as a teaching assistant, and, then, as a primary instructor. The data collected from the course over four years were used to create, first, a static and, then, a dynamic model of a classroom system. By using model output and qualitative feedback from students, changes to the course organization and content were introduced. These changes led to a lower perceived course workload and increased the students' satisfaction with the instructor, but the students' overall satisfaction with the course did not change significantly, and their attitude toward the course subject actually became more negative. This research brought performance measurement to the level of a classroom, created a dynamic model of the classroom system based on the cause-and-effect relationships discovered by using statistical analysis, and used a systematic, continuous improvement approach to modify the course in order to improve selected educational processes and outcomes.

Enabling Real-time Water Decision Support Services Using Model as a Service

NASA Astrophysics Data System (ADS)

Zhao, T.; Minsker, B. S.; Lee, J. S.; Salas, F. R.; Maidment, D. R.; David, C. H.

2014-12-01

Through application of computational methods and an integrated information system, data and river modeling services can help researchers and decision makers more rapidly understand river conditions under alternative scenarios. To enable this capability, workflows (i.e., analysis and model steps) are created and published as Web services delivered through an internet browser, including model inputs, a published workflow service, and visualized outputs. The RAPID model, which is a river routing model developed at University of Texas Austin for parallel computation of river discharge, has been implemented as a workflow and published as a Web application. This allows non-technical users to remotely execute the model and visualize results as a service through a simple Web interface. The model service and Web application has been prototyped in the San Antonio and Guadalupe River Basin in Texas, with input from university and agency partners. In the future, optimization model workflows will be developed to link with the RAPID model workflow to provide real-time water allocation decision support services.

A universal self-charging system driven by random biomechanical energy for sustainable operation of mobile electronics

NASA Astrophysics Data System (ADS)

Niu, Simiao; Wang, Xiaofeng; Yi, Fang; Zhou, Yu Sheng; Wang, Zhong Lin

2015-12-01

Human biomechanical energy is characterized by fluctuating amplitudes and variable low frequency, and an effective utilization of such energy cannot be achieved by classical energy-harvesting technologies. Here we report a high-efficient self-charging power system for sustainable operation of mobile electronics exploiting exclusively human biomechanical energy, which consists of a high-output triboelectric nanogenerator, a power management circuit to convert the random a.c. energy to d.c. electricity at 60% efficiency, and an energy storage device. With palm tapping as the only energy source, this power unit provides a continuous d.c. electricity of 1.044 mW (7.34 W m-3) in a regulated and managed manner. This self-charging unit can be universally applied as a standard `infinite-lifetime' power source for continuously driving numerous conventional electronics, such as thermometers, electrocardiograph system, pedometers, wearable watches, scientific calculators and wireless radio-frequency communication system, which indicates the immediate and broad applications in personal sensor systems and internet of things.

Effective algorithm for solving complex problems of production control and of material flows control of industrial enterprise

NASA Astrophysics Data System (ADS)

Mezentsev, Yu A.; Baranova, N. V.

2018-05-01

A universal economical and mathematical model designed for determination of optimal strategies for managing subsystems (components of subsystems) of production and logistics of enterprises is considered. Declared universality allows taking into account on the system level both production components, including limitations on the ways of converting raw materials and components into sold goods, as well as resource and logical restrictions on input and output material flows. The presented model and generated control problems are developed within the framework of the unified approach that allows one to implement logical conditions of any complexity and to define corresponding formal optimization tasks. Conceptual meaning of used criteria and limitations are explained. The belonging of the generated tasks of the mixed programming with the class of NP is shown. An approximate polynomial algorithm for solving the posed optimization tasks for mixed programming of real dimension with high computational complexity is proposed. Results of testing the algorithm on the tasks in a wide range of dimensions are presented.

A universal self-charging system driven by random biomechanical energy for sustainable operation of mobile electronics.

PubMed

Niu, Simiao; Wang, Xiaofeng; Yi, Fang; Zhou, Yu Sheng; Wang, Zhong Lin

2015-12-11

Human biomechanical energy is characterized by fluctuating amplitudes and variable low frequency, and an effective utilization of such energy cannot be achieved by classical energy-harvesting technologies. Here we report a high-efficient self-charging power system for sustainable operation of mobile electronics exploiting exclusively human biomechanical energy, which consists of a high-output triboelectric nanogenerator, a power management circuit to convert the random a.c. energy to d.c. electricity at 60% efficiency, and an energy storage device. With palm tapping as the only energy source, this power unit provides a continuous d.c. electricity of 1.044 mW (7.34 W m(-3)) in a regulated and managed manner. This self-charging unit can be universally applied as a standard 'infinite-lifetime' power source for continuously driving numerous conventional electronics, such as thermometers, electrocardiograph system, pedometers, wearable watches, scientific calculators and wireless radio-frequency communication system, which indicates the immediate and broad applications in personal sensor systems and internet of things.

Scientific production of Sports Science in Iran: A Scientometric Analysis.

PubMed

Yaminfirooz, Mousa; Siamian, Hasan; Jahani, Mohammad Ali; Yaminifirouz, Masoud

2014-06-01

Physical education and sports science is one of the branches of humanities. The purpose of this study is determining the quantitative and qualitative rate of progress in scientific Production of Iran's researcher in Web of Science. Research Methods is Scientometric survey and Statistical Society Includes 233 Documents From 1993 to 2012 are indexed in ISI. Results showed that the time of this study, Iranian researchers' published 233 documents in this base during this period of time which has been cited 1106(4.76 times on average). The H- index has also been 17. Iran's most scientific productions in sports science realm was indexed in 2010 with 57 documents and the least in 2000. By considering the numbers of citations and the obtained H- index, it can be said that the quality of Iranian's articles is rather acceptable but in comparison to prestigious universities and large number of professors and university students in this field, the quantity of outputted articles is very low.

Fast neutron measurement at Soudan Mine using a large liquid scintillation detector

NASA Astrophysics Data System (ADS)

Zhang, Chao; Mei, Dongming

2014-03-01

Characterizing neutron background is extremely important to the success of rare-event physics searching for neutrinoless double-beta decay and dark matter searches. Measuring the energy spectrum of fast neutrons for an underground laboratory is difficult and it requires intensive R&D for a given technology. EJ-301 liquid scintillator(known also as NE-213) is implemented as the target for a 12 liter neutron detector fabricated at the University of South Dakota. The light output response to atmospheric neutrons from a few MeV up to ~ 70 MeV has been calibrated for this detector. The detector has been taking data at Soudan Mine for over two years. We report the measured muon-induced neutrons in this paper. This work is supported in part by NSF PHY-0758120, PHYS-0919278, PHYS-0758120, PHYS-1242640, DOE grant DE-FG02-10ER46709, the Office of Research at the University of South Dakota and a 2010 research center support by the State of South Dakota.

Building model analysis applications with the Joint Universal Parameter IdenTification and Evaluation of Reliability (JUPITER) API

USGS Publications Warehouse

Banta, E.R.; Hill, M.C.; Poeter, E.; Doherty, J.E.; Babendreier, J.

2008-01-01

The open-source, public domain JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) API (Application Programming Interface) provides conventions and Fortran-90 modules to develop applications (computer programs) for analyzing process models. The input and output conventions allow application users to access various applications and the analysis methods they embody with a minimum of time and effort. Process models simulate, for example, physical, chemical, and (or) biological systems of interest using phenomenological, theoretical, or heuristic approaches. The types of model analyses supported by the JUPITER API include, but are not limited to, sensitivity analysis, data needs assessment, calibration, uncertainty analysis, model discrimination, and optimization. The advantages provided by the JUPITER API for users and programmers allow for rapid programming and testing of new ideas. Application-specific coding can be in languages other than the Fortran-90 of the API. This article briefly describes the capabilities and utility of the JUPITER API, lists existing applications, and uses UCODE_2005 as an example.

Enhancement of Local Climate Analysis Tool

NASA Astrophysics Data System (ADS)

Horsfall, F. M.; Timofeyeva, M. M.; Dutton, J.

2012-12-01

The National Oceanographic and Atmospheric Administration (NOAA) National Weather Service (NWS) will enhance its Local Climate Analysis Tool (LCAT) to incorporate specific capabilities to meet the needs of various users including energy, health, and other communities. LCAT is an online interactive tool that provides quick and easy access to climate data and allows users to conduct analyses at the local level such as time series analysis, trend analysis, compositing, correlation and regression techniques, with others to be incorporated as needed. LCAT uses principles of Artificial Intelligence in connecting human and computer perceptions on application of data and scientific techniques in multiprocessing simultaneous users' tasks. Future development includes expanding the type of data currently imported by LCAT (historical data at stations and climate divisions) to gridded reanalysis and General Circulation Model (GCM) data, which are available on global grids and thus will allow for climate studies to be conducted at international locations. We will describe ongoing activities to incorporate NOAA Climate Forecast System (CFS) reanalysis data (CFSR), NOAA model output data, including output from the National Multi Model Ensemble Prediction System (NMME) and longer term projection models, and plans to integrate LCAT into the Earth System Grid Federation (ESGF) and its protocols for accessing model output and observational data to ensure there is no redundancy in development of tools that facilitate scientific advancements and use of climate model information in applications. Validation and inter-comparison of forecast models will be included as part of the enhancement to LCAT. To ensure sustained development, we will investigate options for open sourcing LCAT development, in particular, through the University Corporation for Atmospheric Research (UCAR).

An innovative demonstration of high power density in a compact MDH (magnetohydrodynamic) generator

NASA Astrophysics Data System (ADS)

Schmidt, H. J.; Lineberry, J. T.; Chapman, J. N.

1990-06-01

The present program was conducted by the University of Tennessee Space Institute (UTSI). It was by its nature a high risk experimental program to demonstrate the feasibility of high power density operation in a laboratory scale combustion driven MHD generator. Maximization of specific energy was not a consideration for the present program, but the results have implications in this regard by virtue of high energy fuel used. The power density is the ratio of the electrical energy output to the internal volume of the generator channel. The MHD process is a volumetric process and the power density is therefore a direct measure of the compactness of the system. Specific energy, is the ratio of the electrical energy output to consumable energy used for its production. The two parameters are conceptually interrelated. To achieve high power density and implied commensurate low system volume and weight, it was necessary to use an energetic fuel. The high energy fuel of choice was a mixture of powdered aluminum and carbon seeded with potassium carbonate and burned with gaseous oxygen. The solid fuel was burned in a hybrid combustion scheme wherein the fuel was cast within a cylindrical combustor in analogy with a solid propellant rocket motor. Experimental data is limited to gross channel output current and voltage, magnetic field strength, fuel and oxidizer flow rates, flow train external temperatures and combustor pressure. Similarly, while instantaneous oxidizer flow rates were measured, only average fuel consumption based on pre and post test component weights and dimensions was possible.

R3D-2-MSA: the RNA 3D structure-to-multiple sequence alignment server.

PubMed

Cannone, Jamie J; Sweeney, Blake A; Petrov, Anton I; Gutell, Robin R; Zirbel, Craig L; Leontis, Neocles

2015-07-01

The RNA 3D Structure-to-Multiple Sequence Alignment Server (R3D-2-MSA) is a new web service that seamlessly links RNA three-dimensional (3D) structures to high-quality RNA multiple sequence alignments (MSAs) from diverse biological sources. In this first release, R3D-2-MSA provides manual and programmatic access to curated, representative ribosomal RNA sequence alignments from bacterial, archaeal, eukaryal and organellar ribosomes, using nucleotide numbers from representative atomic-resolution 3D structures. A web-based front end is available for manual entry and an Application Program Interface for programmatic access. Users can specify up to five ranges of nucleotides and 50 nucleotide positions per range. The R3D-2-MSA server maps these ranges to the appropriate columns of the corresponding MSA and returns the contents of the columns, either for display in a web browser or in JSON format for subsequent programmatic use. The browser output page provides a 3D interactive display of the query, a full list of sequence variants with taxonomic information and a statistical summary of distinct sequence variants found. The output can be filtered and sorted in the browser. Previous user queries can be viewed at any time by resubmitting the output URL, which encodes the search and re-generates the results. The service is freely available with no login requirement at http://rna.bgsu.edu/r3d-2-msa. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

Utilizing Mars Global Reference Atmospheric Model (Mars-GRAM 2005) to Evaluate Entry Probe Mission Sites

NASA Technical Reports Server (NTRS)

Justh, Hilary L.; Justus, Carl G.

2008-01-01

The Mars Global Reference Atmospheric Model (Mars-GRAM 2005) is an engineering-level atmospheric model widely used for diverse mission applications. An overview is presented of Mars-GRAM 2005 and its new features. The "auxiliary profile" option is one new feature of Mars-GRAM 2005. This option uses an input file of temperature and density versus altitude to replace the mean atmospheric values from Mars-GRAM's conventional (General Circulation Model) climatology. Any source of data or alternate model output can be used to generate an auxiliary profile. Auxiliary profiles for this study were produced from mesoscale model output (Southwest Research Institute's Mars Regional Atmospheric Modeling System (MRAMS) model and Oregon State University's Mars mesoscale model (MMM5) model) and a global Thermal Emission Spectrometer (TES) database. The global TES database has been specifically generated for purposes of making Mars-GRAM auxiliary profiles. This data base contains averages and standard deviations of temperature, density, and thermal wind components, averaged over 5-by-5 degree latitude-longitude bins and 15 degree Ls bins, for each of three Mars years of TES nadir data. The Mars Science Laboratory (MSL) sites are used as a sample of how Mars-GRAM' could be a valuable tool for planning of future Mars entry probe missions. Results are presented using auxiliary profiles produced from the mesoscale model output and TES observed data for candidate MSL landing sites. Input parameters rpscale (for density perturbations) and rwscale (for wind perturbations) can be used to "recalibrate" Mars-GRAM perturbation magnitudes to better replicate observed or mesoscale model variability.

pong: fast analysis and visualization of latent clusters in population genetic data.

PubMed

Behr, Aaron A; Liu, Katherine Z; Liu-Fang, Gracie; Nakka, Priyanka; Ramachandran, Sohini

2016-09-15

A series of methods in population genetics use multilocus genotype data to assign individuals membership in latent clusters. These methods belong to a broad class of mixed-membership models, such as latent Dirichlet allocation used to analyze text corpora. Inference from mixed-membership models can produce different output matrices when repeatedly applied to the same inputs, and the number of latent clusters is a parameter that is often varied in the analysis pipeline. For these reasons, quantifying, visualizing, and annotating the output from mixed-membership models are bottlenecks for investigators across multiple disciplines from ecology to text data mining. We introduce pong, a network-graphical approach for analyzing and visualizing membership in latent clusters with a native interactive D3.js visualization. pong leverages efficient algorithms for solving the Assignment Problem to dramatically reduce runtime while increasing accuracy compared with other methods that process output from mixed-membership models. We apply pong to 225 705 unlinked genome-wide single-nucleotide variants from 2426 unrelated individuals in the 1000 Genomes Project, and identify previously overlooked aspects of global human population structure. We show that pong outpaces current solutions by more than an order of magnitude in runtime while providing a customizable and interactive visualization of population structure that is more accurate than those produced by current tools. pong is freely available and can be installed using the Python package management system pip. pong's source code is available at https://github.com/abehr/pong aaron_behr@alumni.brown.edu or sramachandran@brown.edu Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.

Identification of prognostic markers in transthyretin and AL cardiac amyloidosis.

PubMed

Damy, Thibaud; Jaccard, Arnaud; Guellich, Aziz; Lavergne, David; Galat, Arnault; Deux, Jean-François; Hittinger, Luc; Dupuis, Jehan; Frenkel, Valérie; Rigaud, Charlotte; Plante-Bordeneuve, Violaine; Bodez, Diane; Mohty, Dania

2016-09-01

The prognosis of amyloidosis is known to depend heavily on cardiac function and may be improved by identifying patients at highest risk for adverse cardiac events. Identify predictors of mortality in patients with cardiac light-chain amyloidosis (AL), hereditary transthyretin amyloidosis (m-TTR), or wild-type transthyretin amyloidosis (WT-TTR) to prompt physician to refer these patients to dedicated centers. Observational study. About 266 patients referred for suspected cardiac amyloidosis (CA) in two French university centers were included. About 198 patients had CA (AL = 118, m-TTR = 57, and WT-TTR = 23). Their median (25th-75th percentile) age, NT-proBNP left ventricular ejection fraction were, respectively, 68 years (59-76), 2339 pg mL -1 (424-5974), and 60% (48-66). About 31% were in NYHA class III-IV. Interventricular septal thickness was greater in the m-TTR and WT-TTR groups than in the AL group (p < 0.0001). Median follow-up in survivor was 26 months (15-44) and 87 (44%) patients died. By multivariate analysis, independent predictors of mortality for AL amyloidosis were the following: age, cardiac output and NT-proBNP; for TTR amyloidosis was: NT-proBNP. When all amyloidosis were combined NT-proBNP, low cardiac output and pericardial effusion were independently associated with mortality. NT-proBNP is a strong prognosticator in the three types of cardiac amyloidosis. High NT-proBNP, low cardiac output, and pericardial effusion at the time of screening should prompt physician to refer the patients to amyloidosis referral center.

An On-Line Nutrition Information System for the Clinical Dietitian

PubMed Central

Petot, Grace J.; Houser, Harold B.; Uhrich, Roberta V.

1980-01-01

A university based computerized nutrient data base has been integrated into an on-line nutrition information system in a large acute care hospital. Key elements described in the design and installation of the system are the addition of hospital menu items to the existing nutrient data base, the creation of a unique recipe file in the computer, production of a customized menu/nutrient handbook, preparation of forms and establishment of output formats. Standardization of nutrient calculations in the clinical and food production areas, variety and purposes of various format options, the advantages of timesharing and plans for expansion of the system are discussed.

Animating climate model data

NASA Astrophysics Data System (ADS)

DaPonte, John S.; Sadowski, Thomas; Thomas, Paul

2006-05-01

This paper describes a collaborative project conducted by the Computer Science Department at Southern Connecticut State University and NASA's Goddard Institute for Space Science (GISS). Animations of output from a climate simulation math model used at GISS to predict rainfall and circulation have been produced for West Africa from June to September 2002. These early results have assisted scientists at GISS in evaluating the accuracy of the RM3 climate model when compared to similar results obtained from satellite imagery. The results presented below will be refined to better meet the needs of GISS scientists and will be expanded to cover other geographic regions for a variety of time frames.

Solar heating and cooling system design and development

NASA Technical Reports Server (NTRS)

1978-01-01

The progress of the program during the sixth program quarter is reported. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test. The William O'Brien single-family heating system was installed and is operational. The New Castle single-family heating residence is under construction. The Kansas University (KU) system is in the final design stages. The 25 ton cooling subsystem for KU is the debugging stage. Pressure drops that were greater than anticipated were encountered. The 3 ton simulation work is being finalized and the design parameters for the Rankine system were determined from simulation output.

Chimera: a Bioconductor package for secondary analysis of fusion products.

PubMed

Beccuti, Marco; Carrara, Matteo; Cordero, Francesca; Lazzarato, Fulvio; Donatelli, Susanna; Nadalin, Francesca; Policriti, Alberto; Calogero, Raffaele A

2014-12-15

Chimera is a Bioconductor package that organizes, annotates, analyses and validates fusions reported by different fusion detection tools; current implementation can deal with output from bellerophontes, chimeraScan, deFuse, fusionCatcher, FusionFinder, FusionHunter, FusionMap, mapSplice, Rsubread, tophat-fusion and STAR. The core of Chimera is a fusion data structure that can store fusion events detected with any of the aforementioned tools. Fusions are then easily manipulated with standard R functions or through the set of functionalities specifically developed in Chimera with the aim of supporting the user in managing fusions and discriminating false-positive results. © The Author 2014. Published by Oxford University Press.

Universal Three-Qubit Entanglement Generation Based on Linear Optical Elements and Quantum Non-Demolition Detectors

NASA Astrophysics Data System (ADS)

Liu, Xin-Chang

2017-02-01

Recently, entanglement plays an important role in quantum information science. Here we propose an efficient and applicable method which transforms arbitrary three-qubit unknown state to a maximally entangled Greenberger-Horne-Zeilinger state, and the proposed method could be further generalized to multi-qubit case. The proposed setup exploits only linear optical elements and quantum non-demolition detectors using cross-Kerr media. As the quantum non-demolition detection could reveal us the output state of the photons without destroying them. This property may make our proposed setup flexible and can be widely used in current quantum information science and technology.

An alternative way to increase the power gain of resonant rings

NASA Astrophysics Data System (ADS)

Zhuang, Dehao; Liu, Yunqi; Wang, Fang; Lin, Lin; Feng, Liwen; Quan, Shengwen; Liu, Kexin

2018-03-01

Resonant rings which can amplify RF power through the coupling of waves are used for high power breakdown tests, unidirectional filters, or pulse-shaping techniques. Usually, the RF output terminal of a resonant ring is connected to a matched load. For the resonant ring at Peking University, the matched load has been replaced by a waveguide shorting plate to obtain higher conditioning power for the 1.3 GHz capacitive type power couplers. The power gain is increased significantly with this short termination with the same input RF power. Working mechanism analysis, experiments, and results of this modified resonant ring will be presented.

Theory and Modeling of High-Power Gyrotrons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nusinovich, Gregory Semeon

2016-04-29

This report summarized results of the work performed at the Institute for Research in Electronics and Applied Physics of the University of Maryland (College Park, MD) in the framework of the DOE Grant “Theory and Modeling of High-Power Gyrotrons”. The report covers the work performed in 2011-2014. The research work was performed in three directions: - possibilities of stable gyrotron operation in very high-order modes offering the output power exceeding 1 MW level in long-pulse/continuous-wave regimes, - effect of small imperfections in gyrotron fabrication and alignment on the gyrotron efficiency and operation, - some issues in physics of beam-wave interactionmore » in gyrotrons.« less

Research is the Future, the Future is…….

PubMed

Gilchrist, Francis J

2016-01-01

Over the past two decades, Professor Lenney has established the Paediatric Respiratory Department at the Royal Stoke University Hospital as a centre recognised for high quality research. A broad portfolio of clinical and laboratory based research is in progress. Four research areas are discussed that are likely to contribute to the continued academic output from the unit. These are the use of selected ion flow tube mass spectrometry for the detection of biomarkers associated with pulmonary pathogens, the measurement of lung clearance index in preschool children, structured light plethysmography in children and the use of oral prednisolone for asthma exacerbations in children. Copyright © 2015. Published by Elsevier Ltd.

Wild lettuce (Lactuca virosa) toxicity.

PubMed

Besharat, Sima; Besharat, Mahsa; Jabbari, Ali

2009-01-01

Wild lettuce (Lactuca virosa) can cause toxic effects when eaten. Wild lettuce grows in the north of Iran and some natives consume it unaware of its adverse side effects. We describe eight patients with manifestations of wild lettuce toxicity, admitted to a general hospital affiliated to the Golestan University of Medical Sciences. All the patients recovered (although one had to spend 48 h in the intensive care unit) and no chronic complications were reported. A clinical suspicion of toxicity caused by wild lettuce intake and an accurate history formed the basis of the diagnosis. Conservative treatment, vital sign monitoring, control of patient intake and output, and reducing patient agitation provided the basis for treatment.

Multiscale Analysis of the Water Content Output the NWP Model COSMO Over Switzerland and Comparison With Radar Data

NASA Astrophysics Data System (ADS)

Wolfensberger, D.; Gires, A.; Berne, A.; Tchiguirinskaia, I.; Schertzer, D. J. M.

2015-12-01

The resolution of operational numerical prediction models is typically of the order of a few kilometres meaning that small-scale features of precipitation can not be resolved explicitly. This creates the need for representative parametrizations of microphysical processes whose properties should be carefully analysed. In this study we will focus on the COSMO model which is a non-hydrostatic limited-area model, initially developed as the Lokal Model and used operationally in Switzerland and Germany. In its operational version, cloud microphysical processes are simulated with a one-moment bulk scheme where five hydrometeor classes are considered: cloud droplets, rain, ice crystals, snow, and graupel. A more sophisticated two-moment scheme is also available. The study will focus on two case studies: one in Payerne in western Switzerland in a relatively flat region and one in Davos in the eastern Swiss Alps in a more complex terrain.The objective of this work is to characterize the ability of the COSMO NWP model to reproduce the microphysics of precipitation across temporal and spatial scales as well as scaling variability. The characterization of COSMO outputs will rely on the Universal Multifractals framework, which allows to analyse and simulate geophysical fields extremely variabile over a wide range of scales with the help of a reduced number of parameters. First COSMO outputs are analysed; spatial multifractal analysis of 2D maps at various altitudes for each time steps are carried out for simulated solid, liquid, vapour and total water content. In general the fields exhibit a good quality of scaling on the whole range of available scales (2 km - 250 km), but some loss of scaling quality corresponding to the emergence of a scaling break are sometimes visible. This behaviour is not found at the same time or at the same altitude according to the water state and does not necessarily spread to the total water content. It is interpreted with the help of the underlying physical process at stake during the events.Second Multifractal comparisons of model outputs will also be made with radar data provided by the Meteo Swiss, both indirectly in terms of precipitation intensities and directly using a polarimetric forward radar operator which is able to simulate radar observations from model outputs.

KAnalyze: a fast versatile pipelined k-mer toolkit.

PubMed

Audano, Peter; Vannberg, Fredrik

2014-07-15

Converting nucleotide sequences into short overlapping fragments of uniform length, k-mers, is a common step in many bioinformatics applications. While existing software packages count k-mers, few are optimized for speed, offer an application programming interface (API), a graphical interface or contain features that make it extensible and maintainable. We designed KAnalyze to compete with the fastest k-mer counters, to produce reliable output and to support future development efforts through well-architected, documented and testable code. Currently, KAnalyze can output k-mer counts in a sorted tab-delimited file or stream k-mers as they are read. KAnalyze can process large datasets with 2 GB of memory. This project is implemented in Java 7, and the command line interface (CLI) is designed to integrate into pipelines written in any language. As a k-mer counter, KAnalyze outperforms Jellyfish, DSK and a pipeline built on Perl and Linux utilities. Through extensive unit and system testing, we have verified that KAnalyze produces the correct k-mer counts over multiple datasets and k-mer sizes. KAnalyze is available on SourceForge: https://sourceforge.net/projects/kanalyze/. © The Author 2014. Published by Oxford University Press.

An integrative data analysis platform for gene set analysis and knowledge discovery in a data warehouse framework.

PubMed

Chen, Yi-An; Tripathi, Lokesh P; Mizuguchi, Kenji

2016-01-01

Data analysis is one of the most critical and challenging steps in drug discovery and disease biology. A user-friendly resource to visualize and analyse high-throughput data provides a powerful medium for both experimental and computational biologists to understand vastly different biological data types and obtain a concise, simplified and meaningful output for better knowledge discovery. We have previously developed TargetMine, an integrated data warehouse optimized for target prioritization. Here we describe how upgraded and newly modelled data types in TargetMine can now survey the wider biological and chemical data space, relevant to drug discovery and development. To enhance the scope of TargetMine from target prioritization to broad-based knowledge discovery, we have also developed a new auxiliary toolkit to assist with data analysis and visualization in TargetMine. This toolkit features interactive data analysis tools to query and analyse the biological data compiled within the TargetMine data warehouse. The enhanced system enables users to discover new hypotheses interactively by performing complicated searches with no programming and obtaining the results in an easy to comprehend output format. Database URL: http://targetmine.mizuguchilab.org. © The Author(s) 2016. Published by Oxford University Press.

Improving faculty publication output: the role of a writing coach.

PubMed

Baldwin, Claire; Chandler, Genevieve E

2002-01-01

Publishing academic papers is recognized by faculty as vital not only to their careers, but also to the standing of their school within the university and the discipline. Although writing is perceived as a critical, high-priority task, it often has low follow-through behavior. To facilitate the publication output of our faculty, a part-time writing coach was hired. Blanchard's situational leadership II model (1985), which tailors leadership style to the needs of the group, indicated a framework of coaching and support would best meet faculty writing needs. The literature further suggested that an ongoing coaching relationship in the form of a committed partnership would empower faculty to achieve beyond prior performance. We present a model to show how coaching and support facilitate perseverance in writing for publication. Sixteen of 26 faculty sought the coach's help in the first 2.5 years, generating 21 submissions to peer-reviewed journals. Fifteen of these were published or accepted (71 per cent), and one was still under review when this article was written. Five rejected papers had not yet been resubmitted. Faculty with recent doctorates appeared to benefit most from coaching. Copyright 2002 by W.B. Saunders Company

The Japanese Surgical Reimbursement System Fails to Reflect Resource Utilization.

PubMed

Nakata, Yoshinori; Watanabe, Yuichi; Otake, Hiroshi; Nakamura, Toshihito; Oiso, Giichiro; Sawa, Tomohiro

2015-01-01

The goal of this study was to examine the current Japanese surgical payment system from the viewpoint of resource utilization. We collected data from surgical records in Teikyo University's electronic medical record system from April 1 through September 30, 2013. We defined the decision-making unit as a surgeon with the highest academic rank in the surgery. Inputs were defined as: 1) the number of medical doctors who assisted surgery and 2) the time of operation from skin incision to closure. An output was defined as the surgical fee. We calculated each surgeon's efficiency score using the output-oriented Banker-Charnes-Cooper model of data envelopment analysis. We compared the efficiency scores of each surgical specialty using the Kruskal-Wallis and Steel methods. We analyzed 2,825 surgical procedures performed by 103 surgeons. The difference in efficiency scores was significant (P = 0.0001). The thoracic surgeons were the most efficient and were more efficient than plastic, obstetric and gynecologic, urologic, otorhinolaryngologic, orthopedic, general, and emergency surgeons (P < 0.05). We demonstrated that surgeons' efficiency in operating rooms was significantly different among surgical specialties. This suggests that the Japanese surgical reimbursement scales fails to reflect resource utilization. © The Author(s) 2015.

The Conditional Entropy Power Inequality for Bosonic Quantum Systems

NASA Astrophysics Data System (ADS)

De Palma, Giacomo; Trevisan, Dario

2018-06-01

We prove the conditional Entropy Power Inequality for Gaussian quantum systems. This fundamental inequality determines the minimum quantum conditional von Neumann entropy of the output of the beam-splitter or of the squeezing among all the input states where the two inputs are conditionally independent given the memory and have given quantum conditional entropies. We also prove that, for any couple of values of the quantum conditional entropies of the two inputs, the minimum of the quantum conditional entropy of the output given by the conditional Entropy Power Inequality is asymptotically achieved by a suitable sequence of quantum Gaussian input states. Our proof of the conditional Entropy Power Inequality is based on a new Stam inequality for the quantum conditional Fisher information and on the determination of the universal asymptotic behaviour of the quantum conditional entropy under the heat semigroup evolution. The beam-splitter and the squeezing are the central elements of quantum optics, and can model the attenuation, the amplification and the noise of electromagnetic signals. This conditional Entropy Power Inequality will have a strong impact in quantum information and quantum cryptography. Among its many possible applications there is the proof of a new uncertainty relation for the conditional Wehrl entropy.

Construct, concurrent and discriminant validity of Type D personality in the general population: associations with anxiety, depression, stress and cardiac output.

PubMed

Howard, Siobhán; Hughes, Brian M

2012-01-01

The Type D personality, identified by high negative affectivity paired with high social inhibition, has been associated with a number of health-related outcomes in (mainly) cardiac populations. However, despite its prevalence in the health-related literature, how this personality construct fits within existing personality theory has not been directly tested. Using a sample of 134 healthy university students, this study examined the Type D personality in terms of two well-established personality traits; introversion and neuroticism. Construct, concurrent and discriminant validity of this personality type was established through examination of the associations between the Type D personality and psychometrically assessed anxiety, depression and stress, as well as measurement of resting cardiovascular function. Results showed that while the Type D personality was easily represented using alternative measures of both introversion and neuroticism, associations with anxiety, depression and stress were mainly accounted for by neuroticism. Conversely, however, associations with resting cardiac output were attributable to the negative affectivity-social inhibition synergy, explicit within the Type D construct. Consequently, both the construct and concurrent validity of this personality type were confirmed, with discriminant validity evident on examination of physiological indices of well-being.

Experiments with Coler magnetic current apparatus

NASA Astrophysics Data System (ADS)

Ludwig, T.

Experiments with a replica of the famous Coler "Magnetstromapparat" (magnetic current apparatus) were conducted. The replica was built at the same institute at the Technical University of Berlin where the original was tested by Prof. Kloss in 1925. The details of the setup will be presented in this paper. The investigation of the Coler device was done with modern methods. The output was measured with a digital multi meter (DMM) and a digital storage oscilloscope (DSO). The results of the measurements will be presented. Did Coler convert vacuum fluctuations via magnetic, electric and acoustic resonance into electricity? There is a strong connection between magnetism and quantum field radiation energy. The magnetic moment of the electron is in part an energy exchange with the radiation field. The energy output of the Coler apparatus is measured. Furthermore the dynamics of the ferromagnetic magnets that Coler reported as the working principle of his device was investigated with magnetic force microscopy (MFM) and the spectroscopy mode of an atomic force microscope (AFM). The magnetic and acoustic resonance was investigated with magnetic force microscopy (MFM). The connection between ZPE and magnetism will be discussed as well as the perspective of using magnetic systems as a means to convert vacuum fluctuations into usable electricity.

Improving secondary prevention screening in clinical encounters using mhealth among prelicensure master's entry clinical nursing students.

PubMed

FitzGerald, Leah Z; Rorie, Anne; Salem, Benissa E

2015-04-01

To determine the feasibility and acceptability of a mHealth application among nursing students for health promotion and secondary prevention health recommendations for hospitalized adult patients. A pretest-posttest design with a convenience sample of 169 prelicensure master's entry clinical nursing students in a large urban public university. Survey questions assessed intention to use, perceived usefulness, perceived ease of use, subjective norm, voluntariness, clinical area relevance, output quality, and result demonstrability of the United States Preventive Services Task Force (USPSTF) evidence-based practice guidelines via the mHealth application. Descriptive statistics and frequencies were used to explore sociodemographics; paired t-tests were used to evaluate pre- and posttest differences. Pre- and posttest significant differences (p < .01) were found between intention to use, perceived usefulness, subjective norm, voluntariness, image, clinical relevance, result demonstrability, and output quality (p < .02). Ease use of a mHealth application was not significantly different. These findings highlight the need to integrate evidence-based practice tools using mHealth technology among prelicensure master's entry clinical nursing students in order to engage and foster translational learning and improve dissemination of secondary prevention screening guidelines among hospitalized patients. © 2015 Sigma Theta Tau International.

Effect of seabed roughness on tidal current turbines

NASA Astrophysics Data System (ADS)

Gupta, Vikrant; Wan, Minping

2017-11-01

Tidal current turbines are shown to have potential to generate clean energy for a negligible environmental impact. These devices, however, operate in high to moderate current regions where the flow is highly turbulent. It has been shown in flume tank experiments at IFREMER in Boulogne-Sur-Mer (France) and NAFL in the University of Minnesota (US) that the level of turbulence and boundary layer profile affect a turbine's power output and wake characteristics. A major factor that determines these marine flow characteristics is the seabed roughness. Experiments, however, cannot simulate the high Reynolds number conditions of real marine flows. For that, we rely on numerical simulations. High accuracy numerical methods, such as DNS, of wall-bounded flows are very expensive, where the number of grid-points needed to resolve the flow varies as (Re) 9 / 4 (where Re is the flow Reynolds number). While numerically affordable RANS methods compromise on accuracy. Wall-modelled LES methods, which provide both accuracy and affordability, have been improved tremendously in the recent years. We discuss the application of such numerical methods for studying the effect of seabed roughness on marine flow features and their impact on turbine power output and wake characteristics. NSFC, Project Number 11672123.

Control system and method for a universal power conditioning system

DOEpatents

Lai, Jih-Sheng; Park, Sung Yeul; Chen, Chien-Liang

2014-09-02

A new current loop control system method is proposed for a single-phase grid-tie power conditioning system that can be used under a standalone or a grid-tie mode. This type of inverter utilizes an inductor-capacitor-inductor (LCL) filter as the interface in between inverter and the utility grid. The first set of inductor-capacitor (LC) can be used in the standalone mode, and the complete LCL can be used for the grid-tie mode. A new admittance compensation technique is proposed for the controller design to avoid low stability margin while maintaining sufficient gain at the fundamental frequency. The proposed current loop controller system and admittance compensation technique have been simulated and tested. Simulation results indicate that without the admittance path compensation, the current loop controller output duty cycle is largely offset by an undesired admittance path. At the initial simulation cycle, the power flow may be erratically fed back to the inverter causing catastrophic failure. With admittance path compensation, the output power shows a steady-state offset that matches the design value. Experimental results show that the inverter is capable of both a standalone and a grid-tie connection mode using the LCL filter configuration.

The players may change but the game remains: network analyses of ruminal microbiomes suggest taxonomic differences mask functional similarity.

PubMed

Taxis, Tasia M; Wolff, Sara; Gregg, Sarah J; Minton, Nicholas O; Zhang, Chiqian; Dai, Jingjing; Schnabel, Robert D; Taylor, Jeremy F; Kerley, Monty S; Pires, J Chris; Lamberson, William R; Conant, Gavin C

2015-11-16

By mapping translated metagenomic reads to a microbial metabolic network, we show that ruminal ecosystems that are rather dissimilar in their taxonomy can be considerably more similar at the metabolic network level. Using a new network bi-partition approach for linking the microbial network to a bovine metabolic network, we observe that these ruminal metabolic networks exhibit properties consistent with distinct metabolic communities producing similar outputs from common inputs. For instance, the closer in network space that a microbial reaction is to a reaction found in the host, the lower will be the variability of its enzyme copy number across hosts. Similarly, these microbial enzymes that are nearby to host nodes are also higher in copy number than are more distant enzymes. Collectively, these results demonstrate a widely expected pattern that, to our knowledge, has not been explicitly demonstrated in microbial communities: namely that there can exist different community metabolic networks that have the same metabolic inputs and outputs but differ in their internal structure. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.