Information Exchange Procedures for Major Research Universities; Technical Diary of the Major Research Universities' Pilot Test.

ERIC Educational Resources Information Center

Topping, Jim

The applicability and validity of NCHEMS' Information Exchange Procedures (IEP) to major research universities are examined. IEP enables peer institutions to compare information about their resources. Evaluation of the IEP costing methods are examined in this document, which is intended as an appendix to "Evaluation of the IEP Costing…

A Validation of the Synergistic Leadership Theory by Educational Leaders in Chinese and American Public Universities

ERIC Educational Resources Information Center

Yang, LingLing

2010-01-01

Purpose: The purpose of this study was to investigate the applicability of the synergistic leadership theory (SLT) (Irby, Brown, & Duffy, 1999; Irby, Brown, Duffy, & Trautman, 2002) to Chinese and American educational leaders in 50 high-ranking public Chinese universities and 50 high-ranking public U.S. universities. Methods: This study…

Fractional Differential and Integral Inequalities with Applications

DTIC Science & Technology

2016-02-14

THE ABOVE ADDRESS. Xavier University of Louisiana 1 Drexel Drive New Orleans , LA 70125 -1098 31-Aug-2014 ABSTRACT Number of Papers published in peer...163)at The Fall Southeastern section Meeting at Tulane University, New Orleans , LA, October 13-14, 2012, meeting # 1083. "Numerical Methods for...Muniswamy, ULL and Donna Stutson, Xavier University of Louisiana (1083-34-93) at The Fall Southeastern section Meeting at Tulane University, New

Universal first-order reliability concept applied to semistatic structures

NASA Technical Reports Server (NTRS)

Verderaime, V.

1994-01-01

A reliability design concept was developed for semistatic structures which combines the prevailing deterministic method with the first-order reliability method. The proposed method surmounts deterministic deficiencies in providing uniformly reliable structures and improved safety audits. It supports risk analyses and reliability selection criterion. The method provides a reliability design factor derived from the reliability criterion which is analogous to the current safety factor for sizing structures and verifying reliability response. The universal first-order reliability method should also be applicable for air and surface vehicles semistatic structures.

Universal first-order reliability concept applied to semistatic structures

NASA Astrophysics Data System (ADS)

Verderaime, V.

1994-07-01

A reliability design concept was developed for semistatic structures which combines the prevailing deterministic method with the first-order reliability method. The proposed method surmounts deterministic deficiencies in providing uniformly reliable structures and improved safety audits. It supports risk analyses and reliability selection criterion. The method provides a reliability design factor derived from the reliability criterion which is analogous to the current safety factor for sizing structures and verifying reliability response. The universal first-order reliability method should also be applicable for air and surface vehicles semistatic structures.

Calculation Methods and Conversions for Pesticide Application.

ERIC Educational Resources Information Center

Cole, Herbert, Jr.

This agriculture extension service publication from Pennsylvania State University consists of conversion tables and formulas for determining concentration and rate of application of pesticides. Contents include: (1) Area and volume conversions; (2) Important conversion formulae; (3) Conversions for rates of application; (4) Quantities of pesticide…

Application of universal kriging for prediction pollutant using GStat R

NASA Astrophysics Data System (ADS)

Nur Falah, Annisa; Subartini, Betty; Nurani Ruchjana, Budi

2017-10-01

In the universe, the air and water is a natural resource that is a very big function for living beings. The air is a gas mixture contained in a layer that surrounds the earth and the components of the gas mixture is not always constant. Also in river there is always a pollutant of chemistry concentration more than concentration limit. During the time a lot of air or water pollution caused by industrial waste, coal ash or chemistry pollution is an example of pollution that can pollute the environment and damage the health of humans. To solve this problem we need a method that is able to predict pollutant content in locations that are not observed. In geostatistics, we can use the universal kriging for prediction in a location that unobserved locations. Universal kriging is an interpolation method that has a tendency trend (drift) or a particular valuation method used to deal with non-stationary sample data. GStat R is a program based on open source R software that can be used to predict pollutant in a location that is not observed by the method of universal kriging. In this research, we predicted river pollutant content using trend (drift) equation of first order. GStat R application program in the prediction of river pollutants provides faster computation, more accurate, convenient and can be used as a recommendation for policy makers in the field of environment.

Air Force Engineering Research Initiation Grant Program

DTIC Science & Technology

1994-06-21

MISFET Structures for High-Frequency Device Applications" RI-B-91-13 Prof. John W. Silvestro Clemson University "The Effect of Scattering by a Near...Synthesis Method for Concurrent Engineering Applications" RI-B-92-03 Prof. Steven H. Collicott Purdue University "An Experimental Study of the Effect of a ...beams is studied. The effect of interply delam- inations on natural frequencies and mode shapes is evaluated analytically. A generalized variational

The Application of Commercial Advertising Methods to University Extension. Bulletin, 1919, No. 51

ERIC Educational Resources Information Center

Orvis, Mary Burchard

1919-01-01

For many years, colleges, universities, and State departments of education have become more and more conscious of the importance of extension education, and of the obligation resting upon them to promote it in every way practicable. This is especially true of the State university, which, in many States, is now making an honest effort to extend the…

Nicholas J. Grundl | NREL

Science.gov Websites

-3228 Research Interests Application of numerical methods to process problems Fuel and chemical biochemistry and numerical methods), University of Wisconsin at Madison, 2009-2014 Professional Experience Stem Cells Under Defined Conditions," Tissue Engineering Part C Methods (2013)

Application Process Improvement Yields Results.

ERIC Educational Resources Information Center

Holesovsky, Jan Paul

1995-01-01

After a continuing effort to improve its grant application process, the department of medical microbiology and immunology at the University of Wisconsin-Madison is submitting many more applications and realizing increased funding. The methods and strategy used to make the process more efficient and effective are outlined. (Author/MSE)

All-optical universal logic gates on nonlinear multimode interference coupler using tunable input intensity

NASA Astrophysics Data System (ADS)

Tajaldini, Mehdi; Jafri, Mohd Zubir Mat

2015-04-01

The theory of Nonlinear Modal Propagation Analysis Method (NMPA) have shown significant features of nonlinear multimode interference (MMI) coupler with compact dimension and when launched near the threshold of nonlinearity. Moreover, NMPA have the potential to allow studying the nonlinear MMI based the modal interference to explorer the phenomenon that what happen due to the natural of multimode region. Proposal of all-optical switch based NMPA has approved its capability to achieving the all-optical gates. All-optical gates have attracted increasing attention due to their practical utility in all-optical signal processing networks and systems. Nonlinear multimode interference devices could apply as universal all-optical gates due to significant features that NMPA introduce them. In this Paper, we present a novel Ultra-compact MMI coupler based on NMPA method in low intensity compared to last reports either as a novel design method and potential application for optical NAND, NOR as universal gates on single structure for Boolean logic signal processing devices and optimize their application via studding the contrast ratio between ON and OFF as a function of output width. We have applied NMPA for several applications so that the miniaturization in low nonlinear intensities is their main purpose.

Path Analysis and Residual Plotting as Methods of Environmental Scanning in Higher Education: An Illustration with Applications and Enrollments.

ERIC Educational Resources Information Center

Morcol, Goktug; McLaughlin, Gerald W.

1990-01-01

The study proposes using path analysis and residual plotting as methods supporting environmental scanning in strategic planning for higher education institutions. Path models of three levels of independent variables are developed. Dependent variables measuring applications and enrollments at Virginia Polytechnic Institute and State University are…

A Method of the UMTS-FDD Network Design Based on Universal Load Characteristics

NASA Astrophysics Data System (ADS)

Gajewski, Slawomir

In the paper an original method of the UMTS radio network design was presented. The method is based on simple way of capacity-coverage trade-off estimation for WCDMA/FDD radio interface. This trade-off is estimated by using universal load characteristics and normalized coverage characteristics. The characteristics are useful for any propagation environment as well as for any service performance requirements. The practical applications of these characteristics on radio network planning and maintenance were described.

A New Unified Analysis of Estimate Errors by Model-Matching Phase-Estimation Methods for Sensorless Drive of Permanent-Magnet Synchronous Motors and New Trajectory-Oriented Vector Control, Part II

NASA Astrophysics Data System (ADS)

Shinnaka, Shinji

This paper presents a new unified analysis of estimate errors by model-matching extended-back-EMF estimation methods for sensorless drive of permanent-magnet synchronous motors. Analytical solutions about estimate errors, whose validity is confirmed by numerical experiments, are rich in universality and applicability. As an example of universality and applicability, a new trajectory-oriented vector control method is proposed, which can realize directly quasi-optimal strategy minimizing total losses with no additional computational loads by simply orienting one of vector-control coordinates to the associated quasi-optimal trajectory. The coordinate orientation rule, which is analytically derived, is surprisingly simple. Consequently the trajectory-oriented vector control method can be applied to a number of conventional vector control systems using model-matching extended-back-EMF estimation methods.

Application of Summability Methods to Jackson Theorems for Splines.

DTIC Science & Technology

1984-06-30

principal investigator Dr. Louise Paphael of the Department of Mathematics, Howard University investigated three major problems in the areas of...Differential Equations, August 1983. c) Howard University , Department of Mechanical Engineering, October 1983. d) AMS meeting, San Luis Obispo, Ca., Special...Session on Partial Differen- tial Equations, November 1983. e) Bryn Mawr College, Pa., Fourier Series Seminar, December 1983. f) Howard University , Department

Extracurricular activities of medical school applicants

PubMed Central

2016-01-01

Purpose: The purpose of this study was to investigate medical school applicants’ involvements in extracurricular activities including medical volunteering/community services, nonmedical community services, club activities, leadership role, and research. Methods: Extracurricular characteristics were compared for 448 applicants (223 males and 225 females) who applied to Kangwon Medical School in 2013 to 2014. Frequency analysis, chi-square test, and simple correlation were conducted with the collected data. Results: The 448 applicants participated in medical volunteer/community services (15.3%), nonmedical community services (39.8%), club activities (22.9%), club officials (10%), and research (13.4%). On average, applicants from foreign universities participated in 0.9 medical volunteer/community service, 0.8 nonmedical community service, 1.7 club activities, and 0.6 research work. On the other hand, applicants from domestic universities reported 0.2 medical volunteer/community service, 1.0 nonmedical community service, 0.7 club activity, and 0.3 research. Conclusion: Involvement in extracurricular activities was extensive for medical school applicants. Participation in extracurricular activities differed between applicants from foreign and domestic universities. Females consistently reported greater participation in extracurricular activities than males. The data can be helpful for admission committees to recruit well-rounded applicants and compare between applicants with similar academic backgrounds. PMID:26996435

Towards the development of universal, fast and highly accurate docking/scoring methods: a long way to go

PubMed Central

Moitessier, N; Englebienne, P; Lee, D; Lawandi, J; Corbeil, C R

2008-01-01

Accelerating the drug discovery process requires predictive computational protocols capable of reducing or simplifying the synthetic and/or combinatorial challenge. Docking-based virtual screening methods have been developed and successfully applied to a number of pharmaceutical targets. In this review, we first present the current status of docking and scoring methods, with exhaustive lists of these. We next discuss reported comparative studies, outlining criteria for their interpretation. In the final section, we describe some of the remaining developments that would potentially lead to a universally applicable docking/scoring method. PMID:18037925

Development of enterprise architecture in university using TOGAF as framework

NASA Astrophysics Data System (ADS)

Amalia, Endang; Supriadi, Hari

2017-06-01

The university of XYZ is located in Bandung, West Java. It has an infrastructure of technology information (IT) which is managed independently. Currently, the IT at the University of XYZ employs a complex conventional management pattern that does not result in a fully integrated IT infrastructure. This is not adaptive in addressing solutions to changing business needs and applications. In addition, it impedes the innovative development of sustainable IT services and also contributes to an unnecessary high workload for managers. This research aims to establish the concept of IS/IT strategic planning. This is used in the development of the IS/IT and in designing the information technology infrastructure based on the framework of The Open Group Architecture Framework (TOGAF) and Architecture Development Method (ADM). A case study will be done at the University of XYZ using the concept of qualitative research through review of literatures and interviews. This study generates the following stages:(1) forming a design using TOGAF and the ADM around nine functional areas of business and propose 12 application candidates to be developed at XYZ University; (2) generating 11 principles of the development of information technology architecture; (3) creating a portfolio for future applications (McFarlan Grid), generating 6 applications in the strategic quadrant (SIAKAD-T, E-LIBRARY, SIPADU-T, DSS, SIPPM-T, KMS), 2 quadrant application operations (PMS-T, CRM), 4 quadrant application supports (MNC-T, NOPEC-T, EMAIL-SYSTEM, SSO); and (4) modelling the enterprise architecture of this study which could be a reference in making a blueprint for the development of information systems and information technology at the University of XYZ.

Nudging Waste Diversion at Western State Colorado University: Application of Behavioral Insights

ERIC Educational Resources Information Center

McCoy, Kimberly; Oliver, Justin J.; Borden, D. Scott; Cohn, Scott I.

2018-01-01

Purpose: This paper aims to test a nudge, or intervention, designed through behavioral insights at a university campus to discover cost-effective means for increasing recycling participation and methods for estimating waste removal cost savings. Design/methodology/approach: A series of studies were conducted demonstrating the effectiveness of…

The Impact of Taiwan's University Multiple-Channel Entrance Policy on Student Learning Outcomes

ERIC Educational Resources Information Center

Hsiao-Fang, Lin

2012-01-01

This research explores the impact of Taiwan's university multiple-channel entrance policy on student learning outcomes, using quantitative research to look for differences in the learning experiences of third-year students who were admitted via different methods (examination and placement, application for admission, recommendation and selection,…

A New Unified Analysis of Estimate Errors by Model-Matching Phase-Estimation Methods for Sensorless Drive of Permanent-Magnet Synchronous Motors and New Trajectory-Oriented Vector Control, Part I

NASA Astrophysics Data System (ADS)

Shinnaka, Shinji; Sano, Kousuke

This paper presents a new unified analysis of estimate errors by model-matching phase-estimation methods such as rotor-flux state-observers, back EMF state-observers, and back EMF disturbance-observers, for sensorless drive of permanent-magnet synchronous motors. Analytical solutions about estimate errors, whose validity is confirmed by numerical experiments, are rich in universality and applicability. As an example of universality and applicability, a new trajectory-oriented vector control method is proposed, which can realize directly quasi-optimal strategy minimizing total losses with no additional computational loads by simply orienting one of vector-control coordinates to the associated quasi-optimal trajectory. The coordinate orientation rule, which is analytically derived, is surprisingly simple. Consequently the trajectory-oriented vector control method can be applied to a number of conventional vector control systems using one of the model-matching phase-estimation methods.

Evolution of self-reporting methods for identifying discrete emotions in science classrooms

NASA Astrophysics Data System (ADS)

Ritchie, Stephen M.; Hudson, Peter; Bellocchi, Alberto; Henderson, Senka; King, Donna; Tobin, Kenneth

2016-09-01

Emotion researchers have grappled with challenging methodological issues in capturing emotions of participants in naturalistic settings such as school or university classrooms. Self-reporting methods have been used frequently, yet these methods are inadequate when used alone. We argue that the self-reporting methods of emotion diaries and cogenerative dialogues can be helpful in identifying in-the-moment emotions when used in conjunction with the microanalysis of video recordings of classroom events. We trace the evolution of our use of innovative self-reporting methods through three cases from our research projects, and propose new directions for our ongoing development and application of these methods in both school and university classrooms.

The double universal joint wrist on a manipulator: Solution of inverse position kinematics and singularity analysis

NASA Technical Reports Server (NTRS)

Williams, Robert L., III

1992-01-01

This paper presents three methods to solve the inverse position kinematics position problem of the double universal joint attached to a manipulator: (1) an analytical solution for two specific cases; (2) an approximate closed form solution based on ignoring the wrist offset; and (3) an iterative method which repeats closed form position and orientation calculations until the solution is achieved. Several manipulators are used to demonstrate the solution methods: cartesian, cylindrical, spherical, and an anthropomorphic articulated arm, based on the Flight Telerobotic Servicer (FTS) arm. A singularity analysis is presented for the double universal joint wrist attached to the above manipulator arms. While the double universal joint wrist standing alone is singularity-free in orientation, the singularity analysis indicates the presence of coupled position/orientation singularities of the spherical and articulated manipulators with the wrist. The cartesian and cylindrical manipulators with the double universal joint wrist were found to be singularity-free. The methods of this paper can be implemented in a real-time controller for manipulators with the double universal joint wrist. Such mechanically dextrous systems could be used in telerobotic and industrial applications, but further work is required to avoid the singularities.

Quantifying Faculty Productivity in Japan: Development and Application of the Achievement-Motivated Key Performance Indicator. Research & Occasional Paper Series: CSHE.8.16

ERIC Educational Resources Information Center

Aida, Misako; Watanabe, Satoshi P.

2016-01-01

Universities throughout the world are trending toward more performance based methods to capture their strengths, weaknesses and productivity. Hiroshima University has developed an integrated objective measure for quantifying multifaceted faculty activities, namely the "Achievement-Motivated Key Performance Indicator" (A-KPI), in order to…

The Faculty's Perception of Web-Based Instruction Application in Iran's Higher Education

ERIC Educational Resources Information Center

Gholami, Khalil; Sayadi, Yaser

2012-01-01

This paper addresses the faculty perception on web-based instruction in order to explain the nature of learning and instruction in this setting. Using a mixed method approach, the research studied a sample of 132 University Faculty (lecturers and professors) in University of Kurdistan. The research tools were interview and questionnaire. The…

Current Research into Chemical and Textual Information Retrieval at the Department of Information Studies, University of Sheffield.

ERIC Educational Resources Information Center

Lynch, Michael F.; Willett, Peter

1987-01-01

Discusses research into chemical information and document retrieval systems at the University of Sheffield. Highlights include the use of cluster analysis methods for document retrieval and drug design, representation and searching of files of generic chemical structures, and the application of parallel computer hardware to information retrieval.…

University Research in Support of TREAT Modeling and Simulation, FY 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeHart, Mark David

Idaho National Laboratory is currently evolving the modeling and simulation (M&S) capability that will enable improved core operation as well as design and analysis of TREAT experiments. This M&S capability primarily uses MAMMOTH, a reactor physics application being developed under the Multi-physics Object Oriented Simulation Environment (MOOSE) framework. MAMMOTH allows the coupling of a number of other MOOSE-based applications. In support of this research, INL is working with four universities to explore advanced solution methods that will complement or augment capabilities in MAMMOTH. This report consists of a collection of year end summaries of research from the universities performed inmore » support of TREAT modeling and simulation. This research was led by Prof. Sedat Goluoglu at the University of Florida, Profs. Jim Morel and Jean Ragusa at Texas A&M University, Profs. Benoit Forget and Kord Smith at Massachusetts Institute of Technology, Prof. Leslie Kerby of Idaho State University and Prof. Barry Ganapol of University of Arizona. A significant number of students were supported at various levels though the projects and, for some, also as interns at INL.« less

Instrumentation for Measurement of Gas Permeability of Polymeric Membranes

NASA Technical Reports Server (NTRS)

Upchurch, Billy T.; Wood, George M.; Brown, Kenneth G.; Burns, Karen S.

1993-01-01

A mass spectrometric 'Dynamic Delta' method for the measurement of gas permeability of polymeric membranes has been developed. The method is universally applicable for measurement of the permeability of any gas through polymeric membrane materials. The usual large sample size of more than 100 square centimeters required for other methods is not necessary for this new method which requires a size less than one square centimeter. The new method should fulfill requirements and find applicability for industrial materials such as food packaging, contact lenses and other commercial materials where gas permeability or permselectivity properties are important.

Applications of Operations Research Techniques in Tufts University Libraries.

ERIC Educational Resources Information Center

Rouse, William B., Ed.

This collection of papers is based on projects done in conjunction with a senior level/graduate course, "Applications of Operations Research Techniques in Systems Engineering." These seven papers describe research studies which utilized user surveys and/or statistical methods to analyze various library operations. The papers are…

"Hebdo-Chim," a Web Application To Support Learning in a Chemistry Methods Pre-Service Course.

ERIC Educational Resources Information Center

Vasquez-Abad, Jesus

1999-01-01

Describes one use of the World Wide Web in support of learning in a chemistry methods course for preservice teachers at the University of Montreal. Discusses an assignment involving a treasure hunt on the Web. (Author/CCM)

Patenting of university and non-university public research organisations in Germany: evidence from patent applications for medical research results.

PubMed

Tinnemann, Peter; Ozbay, Jonas; Saint, Victoria A; Willich, Stefan N

2010-11-18

Patents are one of the most important forms of intellectual property. They grant a time-limited exclusivity on the use of an invention allowing the recuperation of research costs. The use of patents is fiercely debated for medical innovation and especially controversial for publicly funded research, where the patent holder is an institution accountable to public interest. Despite this controversy, for the situation in Germany almost no empirical information exists. The purpose of this study is to examine the amount, types and trends of patent applications for health products submitted by German public research organisations. We conducted a systematic search for patent documents using the publicly accessible database search interface of the German Patent and Trademark Office. We defined keywords and search criteria and developed search patterns for the database request. We retrieved documents with application date between 1988 and 2006 and processed the collected data stepwise to compile the most relevant documents in patent families for further analysis. We developed a rationale and present individual steps of a systematic method to request and process patent data from a publicly accessible database. We retrieved and processed 10194 patent documents. Out of these, we identified 1772 relevant patent families, applied for by 193 different universities and non-university public research organisations. 827 (47%) of these patent families contained granted patents. The number of patent applications submitted by universities and university-affiliated institutions more than tripled since the introduction of legal reforms in 2002, constituting almost half of all patent applications and accounting for most of the post-reform increase. Patenting of most non-university public research organisations remained stable. We search, process and analyse patent applications from publicly accessible databases. Internationally mounting evidence questions the viability of policies to increase commercial exploitation of publicly funded research results. To evaluate the outcome of research policies a transparent evidence base for public debate is needed in Germany.

Universal and integrable nonlinear evolution systems of equations in 2+1 dimensions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maccari, A.

1997-08-01

Integrable systems of nonlinear partial differential equations (PDEs) are obtained from integrable equations in 2+1 dimensions, by means of a reduction method of broad applicability based on Fourier expansion and spatio{endash}temporal rescalings, which is asymptotically exact in the limit of weak nonlinearity. The integrability by the spectral transform is explicitly demonstrated, because the corresponding Lax pairs have been derived, applying the same reduction method to the Lax pair of the initial equation. These systems of nonlinear PDEs are likely to be of applicative relevance and have a {open_quotes}universal{close_quotes} character, inasmuch as they may be derived from a very large classmore » of nonlinear evolution equations with a linear dispersive part. {copyright} {ital 1997 American Institute of Physics.}« less

Universal Design for Learning in the Classroom: Practical Applications. What Works for Special-Needs Learners Series

ERIC Educational Resources Information Center

Hall, Tracey E., Ed.; Meyer, Anne, Ed.; Rose, David H., Ed.

2012-01-01

Clearly written and well organized, this book shows how to apply the principles of universal design for learning (UDL) across all subject areas and grade levels. The editors and contributors describe practical ways to develop classroom goals, assessments, materials, and methods that use UDL to meet the needs of all learners. Specific teaching…

Teaching Android Application Development in a Collaborative Online Environment

ERIC Educational Resources Information Center

Duggan, Louise

2012-01-01

Online education has gained significant popularity in recent years, and this trend is set to continue. One of the reasons for the explosion of online education is the fact that Colleges and Universities need to seek out new delivery methods and to reach out to people who cannot attend College or University. Funding and diversity of courses is also…

The International Market for MBA Qualifications: The Relationship between Tuition Fees and Applications

ERIC Educational Resources Information Center

Elliott, Caroline; Soo, Kwok Tong

2013-01-01

This paper explores the relationship between tuition fees charged by MBA programmes and the number of applications to these programmes, using a panel dataset comprising universities from countries across the world. Using Three-Stage-Least-Squares methods for simultaneous equations, we find a two-way relationship between tuition fees and…

The Zeldovich & Adhesion approximations and applications to the local universe

NASA Astrophysics Data System (ADS)

Hidding, Johan; van de Weygaert, Rien; Shandarin, Sergei

2016-10-01

The Zeldovich approximation (ZA) predicts the formation of a web of singularities. While these singularities may only exist in the most formal interpretation of the ZA, they provide a powerful tool for the analysis of initial conditions. We present a novel method to find the skeleton of the resulting cosmic web based on singularities in the primordial deformation tensor and its higher order derivatives. We show that the A 3 lines predict the formation of filaments in a two-dimensional model. We continue with applications of the adhesion model to visualise structures in the local (z < 0.03) universe.

A universal procedure for primer labelling of amplicons.

PubMed Central

Neilan, B A; Wilton, A N; Jacobs, D

1997-01-01

Detection and visualisation of nucleic acids is integral to genome analyses. Exponential amplification procedures have provided the means for the manipulation of nucleic acid sequences, which were otherwise inaccessible. We describe the development and application of a universal method for the labelling of any PCR product using a single end-labelled primer. Amplification was performed in a single reaction with the resulting amplicon labelled to a high specific activity. The method was adapted to a wide range of PCRs and significantly reduced the expense of such analyses. PMID:9207046

Building model analysis applications with the Joint Universal Parameter IdenTification and Evaluation of Reliability (JUPITER) API

USGS Publications Warehouse

Banta, E.R.; Hill, M.C.; Poeter, E.; Doherty, J.E.; Babendreier, J.

2008-01-01

The open-source, public domain JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) API (Application Programming Interface) provides conventions and Fortran-90 modules to develop applications (computer programs) for analyzing process models. The input and output conventions allow application users to access various applications and the analysis methods they embody with a minimum of time and effort. Process models simulate, for example, physical, chemical, and (or) biological systems of interest using phenomenological, theoretical, or heuristic approaches. The types of model analyses supported by the JUPITER API include, but are not limited to, sensitivity analysis, data needs assessment, calibration, uncertainty analysis, model discrimination, and optimization. The advantages provided by the JUPITER API for users and programmers allow for rapid programming and testing of new ideas. Application-specific coding can be in languages other than the Fortran-90 of the API. This article briefly describes the capabilities and utility of the JUPITER API, lists existing applications, and uses UCODE_2005 as an example.

Trapping penguins with entangled B mesons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dadisman, Ryan; Gardner, Susan; Yan, Xinshuai

2016-01-08

Our first direct observation of time-reversal (T) violation in the BBsystem was reported by the BaBar Collaboration, employing the method of Bañuls and Bernabéu. Given this, we generalize their analysis of the time-dependent T-violating asymmetry (AT) to consider different choices of CP tags for which the dominant amplitudes have the same weak phase. As one application, we find that it is possible to measure departures from the universality of sin(2β)directly. If sin(2β)is universal, as in the Standard Model, the method permits the direct determination of penguin effects in these channels. This method, although no longer a strict test of T,more » can yield tests of the sin(2β)universality, or, alternatively, of penguin effects, of much improved precision even with existing data sets.« less

Web-Based Learning - Yes We Can!

NASA Astrophysics Data System (ADS)

Schroeder, Ulrik

Web-based Learning has become a matter of fact at universities. We are now at the edge of new developments with Web 2.0 applications and social software is radically changing the way of how we communicate and share in social networks. Can we expect an analogous revolution for university education 2.0? I will give some arguments that I rather expect an incremental evolution than a radical change. First, I take a look at current eLearning implementations and organizational frameworks and give an example from RWTH Aachen University. Against the background of cognitive theories the utilization of Web 2.0 applications are promising to strengthen 21st century learning. But methods and tools must be adapted to the context of institutional learning as well as the formal regulations must be adjusted vice versa.

Civil Engineering Applications of Ground Penetrating Radar in Finland

NASA Astrophysics Data System (ADS)

Pellinen, Terhi; Huuskonen-Snicker, Eeva; Olkkonen, Martta-Kaisa; Eskelinen, Pekka

2014-05-01

Ground penetrating radar (GPR) has been used in Finland since 1980's for civil engineering applications. First applications in this field were road surveys and dam inspections. Common GPR applications in road surveys include the thickness evaluation of the pavement, subgrade soil evaluation and evaluation of the soil moisture and frost susceptibility. Since the 1990's, GPR has been used in combination with other non-destructive testing (NDT) methods in road surveys. Recently, more GPR applications have been adopted, such as evaluating bridges, tunnels, railways and concrete elements. Nowadays, compared with other countries GPR is relatively widely used in Finland for road surveys. Quite many companies, universities and research centers in Finland have their own GPR equipment and are involved in the teaching and research of the GPR method. However, further research and promotion of the GPR techniques are still needed since GPR could be used more routinely. GPR has been used to evaluate the air void content of asphalt pavements for years. Air void content is an important quality measure of pavement condition for both the new and old asphalt pavements. The first Finnish guideline was released in 1999 for the method. Air void content is obtained from the GPR data by measuring the dielectric value as continuous record. To obtain air void content data, few pavement cores must be taken for calibration. Accuracy of the method is however questioned because there are other factors that affect the dielectric value of the asphalt layer, in addition to the air void content. Therefore, a research project is currently carried out at Aalto University in Finland. The overall objective is to investigate if the existing GPR technique used in Finland is accurate enough to be used as QC/QA tool in assessing the compaction of asphalt pavements. The project is funded by the Finnish Transport Agency. Further research interests at Aalto University include developing new microwave asphalt radar for the thickness evaluation of thin asphalt layers. This work benefited from networking activities carried out within the EU funded COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar".

Orientation Examples Showing Application of the C.A.M.P.U.S. Simulation Model.

ERIC Educational Resources Information Center

Hansen, B. L.; Barron, J. G.

This pamphlet contains information and examples intended to show how the University of Toronto C.A.M.P.U.S. model operates. C.A.M.P.U.S. (Comprehensive Analytical Method for Planning in the University Sphere) is a computer model which processes projected enrollment statistics and other necessary information in such a way as to yield time-based…

A Study on the Attitudes and Opinions of Engineering Students from the University of Baja California, Mexico, on Science, Technology, and Society

ERIC Educational Resources Information Center

Oliveros Ruiz, Maria Amparo; Sevilla Garcia, Juan Jose; Schorr, Michael

2010-01-01

A proposal is presented for the incorporation of the concepts of STS into the teaching of science and technology at the Faculty of Engineering, Mexicali Campus, of the University of Baja California. The method outlined for the development of research and the application of the "Opinions Questionnaire on Science, Technology and Society"…

Remote sensing training for Corps of Engineering personnel: The university training module concept

NASA Technical Reports Server (NTRS)

1982-01-01

A concept to permit Corps of Engineers personnel to obtain and maintain an appropriate level of individual proficiency in the application of remote sensing to water resource management is described. Recommendations are made for specific training courses and include structure and staffing requirements, syllabi and methods of operation, supporting materials, and procedures for integrating information systems management into the University Training Modules.

Application of Artificial Intelligence Techniques in Uninhabited Aerial Vehicle Flight

NASA Technical Reports Server (NTRS)

Dufrene, Warren R., Jr.

2004-01-01

This paper describes the development of an application of Artificial Intelligence (AI) for Unmanned Aerial Vehicle (UAV) control. The project was done as part of the requirements for a class in AI at NOVA Southeastearn University and a beginning project at NASA Wallops Flight Facility for a resilient, robust, and intelligent UAV flight control system. A method is outlined which allows a base level application for applying an Artificial Intelligence method, Fuzzy Logic, to aspects of Control Logic for UAV flight. One element of UAV flight, automated altitude hold, has been implemented and preliminary results displayed.

Application of Artificial Intelligence Techniques in Uninhabitated Aerial Vehicle Flight

NASA Technical Reports Server (NTRS)

Dufrene, Warren R., Jr.

2003-01-01

This paper describes the development of an application of Artificial Intelligence (AI) for Unmanned Aerial Vehicle (UAV) control. The project was done as part of the requirements for a class in AI at NOVA southeastern University and a beginning project at NASA Wallops Flight Facility for a resilient, robust, and intelligent UAV flight control system. A method is outlined which allows a base level application for applying an Artificial Intelligence method, Fuzzy Logic, to aspects of Control Logic for UAV flight. One element of UAV flight, automated altitude hold, has been implemented and preliminary results displayed.

Green design application on campus to enhance student’s quality of life

NASA Astrophysics Data System (ADS)

Tamiami, H.; Khaira, F.; Fachrudin, A.

2018-02-01

Green design becomes an important thing to applied in the building. Green building will provide comfortability and enhance Quality of Life (QoL) for the users. The purpose of this research is to analyze how green design application on campus to enhance student’s QoL. This research conducted in three campuses which located in North Sumatera Province, namely Universitas Sumatera Utara (USU), Universitas Negeri Medan (Unimed) and Universitas Medan Area (UMA) which have a lot of vegetation, open space, and multi-mass buildings. This research compared the green design application to QoL from three universities. Green design in this research that become independent variables focus on the energy efficiency and conservation (EEC), indoor health and comfort (IHC) and building environment management (BEM) with dependent variable is QoL. This research uses quantitative methods with questionnaire survey techniques. The population is students from the three universities with the sample of each University is 50 samples. The analysis uses multiple regression analysis. The results show that green design application may enhance QoL of students. The campus should have a good green design application to enhance QoL of students and give them comfortability.

Photogrammetry and remote sensing education subjects

NASA Astrophysics Data System (ADS)

Lazaridou, Maria A.; Karagianni, Aikaterini Ch.

2017-09-01

The rapid technologic advances in the scientific areas of photogrammetry and remote sensing require continuous readjustments at the educational programs and their implementation. The teaching teamwork should deal with the challenge to offer the volume of the knowledge without preventing the understanding of principles and methods and also to introduce "new" knowledge (advances, trends) followed by evaluation and presentation of relevant applications. This is of particular importance for a Civil Engineering Faculty as this in Aristotle University of Thessaloniki, as the framework of Photogrammetry and Remote Sensing is closely connected with applications in the four educational Divisions of the Faculty. This paper refers to the above and includes subjects of organizing the courses in photogrammetry and remote sensing in the Civil Engineering Faculty of Aristotle University of Thessaloniki. A scheme of the general curriculum as well the teaching aims and methods are also presented.

[Application of reversed-phase ion-pair chromatography for universal estimation of octanol-water partition coefficients of acid, basic and amphoteric drugs].

PubMed

Zhu, Hui; Yang, Ri-Fang; Yun, Liu-Hong; Jiang, Yu; Li, Jin

2009-09-01

This paper is to establish a reversed-phase ion-pair chromatography (RP-IPC) method for universal estimation of the octanol/water partition coefficients (logP) of a wide range of structurally diverse compounds including acidic, basic, neutral and amphoteric species. The retention factors corresponding to 100% water (logk(w)) were derived from the linear part of the logk'/phi relationship, using at least four isocratic logk' values containing different organic compositions. The logk(w) parameters obtained were close to the corresponding logP values obtained with the standard "shake flask" methods. The mean deviation for test drugs is 0.31. RP-IPC with trifluoroacetic acid as non classic ion-pair agents can be applicable to determine the logP values for a variety of drug-like molecules with increased accuracy.

Physical Education Pre-Service Teachers' Understanding, Application, and Development of Critical Thinking

ERIC Educational Resources Information Center

Liu, Jiling; McBride, Ron E.; Xiang, Ping; Scarmardo-Rhodes, Melissa

2018-01-01

To better prepare physical education (PE) teachers, this study explored a group of pre-service teachers' understanding, application, and development of critical thinking (CT) in a capstone methods course. Participants were 12 pre-service teachers from a PE teacher education (PETE) program at a large university in the southwestern United States.…

Predicting Rural Practice Using Different Definitions to Classify Medical School Applicants as Having a Rural Upbringing

ERIC Educational Resources Information Center

Owen, John A.; Conaway, Mark R.; Bailey, Beth A.; Hayden, Gregory F.

2007-01-01

Purpose: This study determines the relationship between a medical school applicant's rural background and the likelihood of rural practice using different definitions of rural background. Methods: Cohort study of 599 physicians who entered the University of Virginia School of Medicine in 1990-1995 and graduated in 1994-1999. The…

A/H1N1 Vaccine Intentions in College Students: An Application of the Theory of Planned Behavior

ERIC Educational Resources Information Center

Agarwal, Vinita

2014-01-01

Objective: To test the applicability of the Theory of Planned Behavior (TPB) in college students who have not previously received the A/H1N1 vaccine. Participants: Undergraduate communication students at a metropolitan southern university. Methods: In January-March 2010, students from voluntarily participating communication classes completed a…

The self-organizing fractal theory as a universal discovery method: the phenomenon of life.

PubMed

Kurakin, Alexei

2011-03-29

A universal discovery method potentially applicable to all disciplines studying organizational phenomena has been developed. This method takes advantage of a new form of global symmetry, namely, scale-invariance of self-organizational dynamics of energy/matter at all levels of organizational hierarchy, from elementary particles through cells and organisms to the Universe as a whole. The method is based on an alternative conceptualization of physical reality postulating that the energy/matter comprising the Universe is far from equilibrium, that it exists as a flow, and that it develops via self-organization in accordance with the empirical laws of nonequilibrium thermodynamics. It is postulated that the energy/matter flowing through and comprising the Universe evolves as a multiscale, self-similar structure-process, i.e., as a self-organizing fractal. This means that certain organizational structures and processes are scale-invariant and are reproduced at all levels of the organizational hierarchy. Being a form of symmetry, scale-invariance naturally lends itself to a new discovery method that allows for the deduction of missing information by comparing scale-invariant organizational patterns across different levels of the organizational hierarchy.An application of the new discovery method to life sciences reveals that moving electrons represent a keystone physical force (flux) that powers, animates, informs, and binds all living structures-processes into a planetary-wide, multiscale system of electron flow/circulation, and that all living organisms and their larger-scale organizations emerge to function as electron transport networks that are supported by and, at the same time, support the flow of electrons down the Earth's redox gradient maintained along the core-mantle-crust-ocean-atmosphere axis of the planet. The presented findings lead to a radically new perspective on the nature and origin of life, suggesting that living matter is an organizational state/phase of nonliving matter and a natural consequence of the evolution and self-organization of nonliving matter.The presented paradigm opens doors for explosive advances in many disciplines, by uniting them within a single conceptual framework and providing a discovery method that allows for the systematic generation of knowledge through comparison and complementation of empirical data across different sciences and disciplines.

The self-organizing fractal theory as a universal discovery method: the phenomenon of life

PubMed Central

2011-01-01

A universal discovery method potentially applicable to all disciplines studying organizational phenomena has been developed. This method takes advantage of a new form of global symmetry, namely, scale-invariance of self-organizational dynamics of energy/matter at all levels of organizational hierarchy, from elementary particles through cells and organisms to the Universe as a whole. The method is based on an alternative conceptualization of physical reality postulating that the energy/matter comprising the Universe is far from equilibrium, that it exists as a flow, and that it develops via self-organization in accordance with the empirical laws of nonequilibrium thermodynamics. It is postulated that the energy/matter flowing through and comprising the Universe evolves as a multiscale, self-similar structure-process, i.e., as a self-organizing fractal. This means that certain organizational structures and processes are scale-invariant and are reproduced at all levels of the organizational hierarchy. Being a form of symmetry, scale-invariance naturally lends itself to a new discovery method that allows for the deduction of missing information by comparing scale-invariant organizational patterns across different levels of the organizational hierarchy. An application of the new discovery method to life sciences reveals that moving electrons represent a keystone physical force (flux) that powers, animates, informs, and binds all living structures-processes into a planetary-wide, multiscale system of electron flow/circulation, and that all living organisms and their larger-scale organizations emerge to function as electron transport networks that are supported by and, at the same time, support the flow of electrons down the Earth's redox gradient maintained along the core-mantle-crust-ocean-atmosphere axis of the planet. The presented findings lead to a radically new perspective on the nature and origin of life, suggesting that living matter is an organizational state/phase of nonliving matter and a natural consequence of the evolution and self-organization of nonliving matter. The presented paradigm opens doors for explosive advances in many disciplines, by uniting them within a single conceptual framework and providing a discovery method that allows for the systematic generation of knowledge through comparison and complementation of empirical data across different sciences and disciplines. PMID:21447162

Testing and Validation of the Dynamic Interia Measurement Method

NASA Technical Reports Server (NTRS)

Chin, Alexander; Herrera, Claudia; Spivey, Natalie; Fladung, William; Cloutier, David

2015-01-01

This presentation describes the DIM method and how it measures the inertia properties of an object by analyzing the frequency response functions measured during a ground vibration test (GVT). The DIM method has been in development at the University of Cincinnati and has shown success on a variety of small scale test articles. The NASA AFRC version was modified for larger applications.

An Empirical Method for Deriving Grade Equivalence for University Entrance Qualifications: An Application to A Levels and the International Baccalaureate

ERIC Educational Resources Information Center

Green, Francis; Vignoles, Anna

2012-01-01

We present a method to compare different qualifications for entry to higher education by studying students' subsequent performance. Using this method for students holding either the International Baccalaureate (IB) or A-levels gaining their degrees in 2010, we estimate an "empirical" equivalence scale between IB grade points and UCAS…

PREFACE: 2nd International Conference and Young Scientist School ''Magnetic resonance imaging in biomedical research''

NASA Astrophysics Data System (ADS)

Naumova, A. V.; Khodanovich, M. Y.; Yarnykh, V. L.

2016-02-01

The Second International Conference and Young Scientist School ''Magnetic resonance imaging in biomedical research'' was held on the campus of the National Research Tomsk State University (Tomsk, Russia) on September 7-9, 2015. The conference was focused on magnetic resonance imaging (MRI) applications for biomedical research. The main goal was to bring together basic scientists, clinical researchers and developers of new MRI techniques to bridge the gap between clinical/research needs and advanced technological solutions. The conference fostered research and development in basic and clinical MR science and its application to health care. It also had an educational purpose to promote understanding of cutting-edge MR developments. The conference provided an opportunity for researchers and clinicians to present their recent theoretical developments, practical applications, and to discuss unsolved problems. The program of the conference was divided into three main topics. First day of the conference was devoted to educational lectures on the fundamentals of MRI physics and image acquisition/reconstruction techniques, including recent developments in quantitative MRI. The second day was focused on developments and applications of new contrast agents. Multinuclear and spectroscopic acquisitions as well as functional MRI were presented during the third day of the conference. We would like to highlight the main developments presented at the conference and introduce the prominent speakers. The keynote speaker of the conference Dr. Vasily Yarnykh (University of Washington, Seattle, USA) presented a recently developed MRI method, macromolecular proton fraction (MPF) mapping, as a unique tool for modifying image contrast and a unique tool for quantification of the myelin content in neural tissues. Professor Yury Pirogov (Lomonosov Moscow State University) described development of new fluorocarbon compounds and applications for biomedicine. Drs. Julia Velikina and Alexey Samsonov (University of Wisconsin-Madison, USA) demonstrated new image reconstruction methods for accelerated quantitative parameter mapping and magnetic resonance angiography. Finally, we would like to thank the scientific committee, the local organizing committee and the National Research Tomsk State University for giving an opportunity to share scientific ideas and new developments at the conference and the Russian Science Foundation (project № 14-45-00040) for financial support.

Crisis on campus: Eating disorder intervention from a developmental-ecological perspective.

PubMed

Taylor, Julia V; Gibson, Donna M

2016-01-01

The purpose of this article is to review a crisis intervention using the developmental-ecological protocol (Collins and Collins, 2005) with a college student presenting with symptomatology of an active eating disorder. Participants included University Wellness Center employees responding to the crisis. Methods include an informal review of the crisis intervention response and application of the ABCDE developmental-ecological crisis model. Results reported include insight into crisis intervention when university counseling and health center is not available as resources. ABCDE Developmental-ecological model recommendations for university faculty and staff are included.

Universal 'imaginary closed circuit method' and formula for determination of direction of induced emf/current

NASA Astrophysics Data System (ADS)

Balaram Atram, Dattatraya

2011-01-01

Fleming's right-hand rule and the right-flat-hand rule are generally applied for determining the direction of flow of induced emf/current in straight conductors. The right-hand-fingers rule is applied for coils only. The right-hand-thumb rule can be applied for either straight conductors or coils. Different rules have to be applied for different situations. Also, a formula for determining the direction of induced emf/current does not exist on the basis of these rules. In this article, based on Faraday's law of electromagnetic induction and Lenz's law, an 'imaginary closed circuit method' and a formula for determination of direction of induced emf/current has been proposed. The method is universal in the sense that it is applicable for conductors of any shape, for any kind of relative motion of the conductor with respect to the magnetic flux, and moreover it is applicable for the case of varying magnetic flux.

Monte Carlo: in the beginning and some great expectations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metropolis, N.

1985-01-01

The central theme will be on the historical setting and origins of the Monte Carlo Method. The scene was post-war Los Alamos Scientific Laboratory. There was an inevitability about the Monte Carlo Event: the ENIAC had recently enjoyed its meteoric rise (on a classified Los Alamos problem); Stan Ulam had returned to Los Alamos; John von Neumann was a frequent visitor. Techniques, algorithms, and applications developed rapidly at Los Alamos. Soon, the fascination of the Method reached wider horizons. The first paper was submitted for publication in the spring of 1949. In the summer of 1949, the first open conferencemore » was held at the University of California at Los Angeles. Of some interst perhaps is an account of Fermi's earlier, independent application in neutron moderation studies while at the University of Rome. The quantum leap expected with the advent of massively parallel processors will provide stimuli for very ambitious applications of the Monte Carlo Method in disciplines ranging from field theories to cosmology, including more realistic models in the neurosciences. A structure of multi-instruction sets for parallel processing is ideally suited for the Monte Carlo approach. One may even hope for a modest hardening of the soft sciences.« less

[Application and case analysis on the problem-based teaching of Jingluo Shuxue Xue (Science of Meridian and Acupoint) in reference to the team oriented learning method].

PubMed

Ma, Ruijie; Lin, Xianming

2015-12-01

The problem based teaching (PBT) has been the main approach to the training in the universities o the world. Combined with the team oriented learning method, PBT will become the method available to the education in medical universities. In the paper, based on the common questions in teaching Jingluo Shuxue Xue (Science of Meridian and Acupoint), the concepts and characters of PBT and the team oriented learning method were analyzed. The implementation steps of PBT were set up in reference to the team oriented learning method. By quoting the original text in Beiji Qianjin Yaofang (Essential recipes for emergent use worth a thousand gold), the case analysis on "the thirteen devil points" was established with PBT.

Motivating Power System Protection Course Students by Practical and Computer-Based Activities

ERIC Educational Resources Information Center

Shahnia, Farhad; Moghbel, Moayed; Yengejeh, Hadi Hosseinian

2016-01-01

This paper presents several methods for motivating students taking a power system protection (PSP) course. The paper reviews the laboratory activities developed for the PSP course at Curtin University, Australia; these methods are applicable and can be used for PSP course instruction at any institution. These activities were developed to improve…

Wind tunnel magnetic Suspension Systems at the University of Southampton, England

NASA Technical Reports Server (NTRS)

Goodyer, Michael J.

1992-01-01

The magnetic suspension system at Southampton University was used in two roles: as a device for producing useful aerodynamic data, and as a vehicle to develop and demonstrate new technology for application to a projected larger facility. Examples of both follow, beginning with an outline of the quest to develop methods for reaching high angles of attack because of current interest in researching the associated aerodynamics.

A Universal Ts-VI Triangle Method for the Continuous Retrieval of Evaporative Fraction From MODIS Products

NASA Astrophysics Data System (ADS)

Zhu, Wenbin; Jia, Shaofeng; Lv, Aifeng

2017-10-01

The triangle method based on the spatial relationship between remotely sensed land surface temperature (Ts) and vegetation index (VI) has been widely used for the estimates of evaporative fraction (EF). In the present study, a universal triangle method was proposed by transforming the Ts-VI feature space from a regional scale to a pixel scale. The retrieval of EF is only related to the boundary conditions at pixel scale, regardless of the Ts-VI configuration over the spatial domain. The boundary conditions of each pixel are composed of the theoretical dry edge determined by the surface energy balance principle and the wet edge determined by the average air temperature of open water. The universal triangle method was validated using the EF observations collected by the Energy Balance Bowen Ratio systems in the Southern Great Plains of the United States of America (USA). Two parameterization schemes of EF were used to demonstrate their applicability with Terra Moderate Resolution Imaging Spectroradiometer (MODIS) products over the whole year 2004. The results of this study show that the accuracy produced by both of these two parameterization schemes is comparable to that produced by the traditional triangle method, although the universal triangle method seems specifically suited to the parameterization scheme proposed in our previous research. The independence of the universal triangle method from the Ts-VI feature space makes it possible to conduct a continuous monitoring of evapotranspiration and soil moisture. That is just the ability the traditional triangle method does not possess.

Do high tuition fees make a difference? Characteristics of applicants to UK medical and dental schools before and after the introduction of high tuition fees in 2012.

PubMed

Gallagher, J E; Calvert, A; Niven, V; Cabot, L

2017-02-10

Aim To compare trends in the volume, socio-demography and academic experience of UK applicants and entrants to medicine and dentistry in the UK with university in general, before and after the major increase in university fees in England in 2012.Methods Descriptive trend analyses of University and College Admissions Services (UCAS) data for focused (preferred subject was medicine or dentistry) and accepted applicants, 2010-14, compared with university in general in relation to socio-demography (age, sex, ethnicity, POLAR 2, region) and academic experience (school type). POLAR2 data provide an indication of the likelihood of young people in the area participating in further or higher education.Results In 2012 the volume of applicants to medicine and dentistry fell by 2.4% and 7.8% respectively, compared with 6.6% for university overall. Medical applications remained buoyant and by 2014 had risen by 10.2% from 2010 to 23,365. While dental applications fell in both 2012 and 2013, they had increased by 15.6% to 3,410 in 2014, above 2010 levels. Females formed the majority of applicants, and admissions, with the proportion gaining admission to dentistry in 2014 reaching an all-time high (64%), exceeding medicine (56%), and university in general (56%). Mature admissions to dentistry were at their highest in 2010 (29%) falling to 21% in 2014, compared with 22-24% in medicine. Black and minority ethnic group admissions to university, although rising (24% in 2014), are still less than for medicine (34%) and dentistry (48%). In 2013, just over half of the students admitted to dentistry were from BME groups (51%) for dentistry. Among UK applicants <19 years, over 60% of applicants, and 70% of accepted applicants, to medicine and dentistry are from the top two POLAR2 quintiles representing areas of high participation in education; however, in 2014 there was a notable increase in the proportion of applications from the lower two quintiles to dentistry (19%) and medicine (20%), with a very modest increase in those gaining admission over 2012 (14% of both; cf 10% and 12% respectively).Discussion The findings suggest that the short-term impact of the 2012 rise in fees had a greater influence on the volume and nature of applicants to dentistry than medicine, and that both programmes are gaining in popularity, despite high fees and reduced places. Dentistry remains particularly attractive to Asians, and females, the latter forming an increasing majority of students. While there is some recovery, social inequalities exist and present a challenge for widening participation in the professions.

Universal Assembly for Captive Bolts

NASA Technical Reports Server (NTRS)

Marke, M. L.; Hagopian, B.

1982-01-01

New method allows for virtually any bolt to be easily converted to "captive" bolt. Method eliminates need for separate design for each application. Cup-shaped washer that is flattened secures tap to bolt. Wire attached to tab holds bolt assembly captive. Flattening washer can also be done during installation of bolt. Wash, tab and spacer are all made of corrosion-resistant steel.

The Effects of Jigsaw Technique Based on Cooperative Learning on Prospective Science Teachers' Science Process Skill

ERIC Educational Resources Information Center

Karacop, Ataman; Diken, Emine Hatun

2017-01-01

The purpose of this study is to investigate the effects of laboratory approach based on jigsaw method with cooperative learning and confirmatory laboratory approach on university students' cognitive process development in Science teaching laboratory applications, and to determine the opinions of the students on applied laboratory methods. The…

Research Methods in Environmental Studies: A County Planning Application in Colorado.

ERIC Educational Resources Information Center

Gruntfest, Eve C.

To obtain practical experience, a research methods class at the University of Colorado (Colorado Springs) undertook a special project to help a nearby county (Park County), assess its planning needs. The county was chosen for its characteristics as a rapidly growing rural area faced with the problems created by mounting population pressure on…

Cavity radiation model for solar central receivers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lipps, F.W.

1981-01-01

The Energy Laboratory of the University of Houston has developed a computer simulation program called CREAM (i.e., Cavity Radiations Exchange Analysis Model) for application to the solar central receiver system. The zone generating capability of CREAM has been used in several solar re-powering studies. CREAM contains a geometric configuration factor generator based on Nusselt's method. A formulation of Nusselt's method provides support for the FORTRAN subroutine NUSSELT. Numerical results from NUSSELT are compared to analytic values and values from Sparrow's method. Sparrow's method is based on a double contour integral and its reduction to a single integral which is approximatedmore » by Guassian methods. Nusselt's method is adequate for the intended engineering applications, but Sparrow's method is found to be an order of magnitude more efficient in many situations.« less

An Application of the Finite Element Method to the Solution of Low Reynolds Number, Incompressible Flow Around a Joukowski Aerofoil, with Emphasis on Automatic Generation of Grids.

DTIC Science & Technology

1983-06-01

Library Universities and Colleges Sydney Dr G.P. Steven, Dept. of Aeronautical Engineering SPARES (10 copies) TOTAL (50 copies) * 1’ Department of...ORGANISATION AERONAUTICAL RESEARCH LABORATORIES MELBOURNE, VICTORIA AsZodynaiLcs Tecbhical ismiro a 349 AN APPLICATION OF THE FINITE ELEMENT METHOD TO THE...SOLUTION OF LOW REYNOLDS NUMBER, INCOMPRESSIBLE FLOW AROUND A JOUIKOWSKI AEROFOIL , WITH EMPHASIS ON ALJTOMATIC GENERATION OF 6RIDS T. TDTIC SELECTED SEP29

Application of the Quality Functional Deployment Method in Mobility Aid Securement System Design

DOT National Transportation Integrated Search

1992-12-01

The Independent Locking Securement System Project (ILS System Project) is a : successful attempt to respond to the transportation community's need for a : "universal" securement/restraint system that will accommodate most wheeled : mobility aids, inc...

Application of innovative nondestructive methods to geotechnical and environmental investigations

DOT National Transportation Integrated Search

2003-04-01

Geophysical surveys were conducted for the Missouri Department of Transportation (MoDOT) by the Department of Geology and Geophysics at the University of Missouri-Rolla. This report contains the results of several projects that utilized nondestructiv...

Student Receivables Management: Opportunities for Improved Practices.

ERIC Educational Resources Information Center

Jacquin, Jules C.; Goyal, Anil K.

1995-01-01

The college or university's business office can help reduce problems with student receivables through procedural review of the tuition revenue process, application of analytical methods, and improved operating practices. Admissions, financial aid, and billing offices must all be involved. (MSE)

[Application of case-based method in genetics and eugenics teaching].

PubMed

Li, Ya-Xuan; Zhao, Xin; Zhang, Fei-Xiong; Hu, Ying-Kao; Yan, Yue-Ming; Cai, Min-Hua; Li, Xiao-Hui

2012-05-01

Genetics and Eugenics is a cross-discipline between genetics and eugenics. It is a common curriculum in many Chinese universities. In order to increase the learning interest, we introduced case teaching method and got a better teaching effect. Based on our teaching practices, we summarized some experiences about this subject. In this article, the main problem of case-based method applied in Genetics and Eugenics teaching was discussed.

A Universally Applicable and Rapid Method for Measuring the Growth of Streptomyces and Other Filamentous Microorganisms by Methylene Blue Adsorption-Desorption

PubMed Central

Fischer, Marco

2013-01-01

Quantitative assessment of growth of filamentous microorganisms, such as streptomycetes, is generally restricted to determination of dry weight. Here, we describe a straightforward methylene blue-based sorption assay to monitor microbial growth quantitatively, simply, and rapidly. The assay is equally applicable to unicellular and filamentous bacterial and eukaryotic microorganisms. PMID:23666340

The use of multivariate statistics in studies of wildlife habitat

Treesearch

David E. Capen

1981-01-01

This report contains edited and reviewed versions of papers presented at a workshop held at the University of Vermont in April 1980. Topics include sampling avian habitats, multivariate methods, applications, examples, and new approaches to analysis and interpretation.

The separate universe approach to soft limits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kenton, Zachary; Mulryne, David J., E-mail: z.a.kenton@qmul.ac.uk, E-mail: d.mulryne@qmul.ac.uk

We develop a formalism for calculating soft limits of n -point inflationary correlation functions using separate universe techniques. Our method naturally allows for multiple fields and leads to an elegant diagrammatic approach. As an application we focus on the trispectrum produced by inflation with multiple light fields, giving explicit formulae for all possible single- and double-soft limits. We also investigate consistency relations and present an infinite tower of inequalities between soft correlation functions which generalise the Suyama-Yamaguchi inequality.

Evaluate Wiki Technology as e-Learning Tool from the Point View of Al-Baha University Students: A Pilot Study with Undergraduate Students in Both Faculties of Science and Education

ERIC Educational Resources Information Center

Alzahrani, Ibraheem

2012-01-01

Wikis technologies are one of Web 2.0 applications that can be used to improve the learning method and to engage students in learning with others in a collaborative environment. This paper investigates the potential use of wiki technology in Al-Baha University through students' perceptions; the study seeks to answer the main question. How to…

77 FR 61597 - Liberty University, Inc.; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-10

... University, Inc.; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments, Motions To Intervene, and Competing Applications On June 15, 2012, Liberty University, Inc., filed an... University, 1971 University Blvd., Lynchburg, Virginia 24502; phone: (434) 592-3315; email: [email protected

77 FR 41980 - Liberty University, Inc.; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-17

... University, Inc.; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments, Motions To Intervene, and Competing Applications On June 15, 2012, Liberty University, Inc., filed an... University, 1971 University Blvd., Lynchburg, Virginia 24502; phone: (434) 592-3315; email: [email protected

Evaluation of strategies to control Fab light chain dimer during mammalian expression and purification: A universal one-step process for purification of correctly assembled Fab.

PubMed

Spooner, Jennifer; Keen, Jenny; Nayyar, Kalpana; Birkett, Neil; Bond, Nicholas; Bannister, David; Tigue, Natalie; Higazi, Daniel; Kemp, Benjamin; Vaughan, Tristan; Kippen, Alistair; Buchanan, Andrew

2015-07-01

Fabs are an important class of antibody fragment as both research reagents and therapeutic agents. There are a plethora of methods described for their recombinant expression and purification. However, these do not address the issue of excessive light chain production that forms light chain dimers nor do they describe a universal purification strategy. Light chain dimer impurities and the absence of a universal Fab purification strategy present persistent challenges for biotechnology applications using Fabs, particularly around the need for bespoke purification strategies. This study describes methods to address light chain dimer formation during Fab expression and identifies a novel CH 1 affinity resin as a simple and efficient one-step purification for correctly assembled Fab. © 2015 Wiley Periodicals, Inc.

Coupling functions: Universal insights into dynamical interaction mechanisms

NASA Astrophysics Data System (ADS)

Stankovski, Tomislav; Pereira, Tiago; McClintock, Peter V. E.; Stefanovska, Aneta

2017-10-01

The dynamical systems found in nature are rarely isolated. Instead they interact and influence each other. The coupling functions that connect them contain detailed information about the functional mechanisms underlying the interactions and prescribe the physical rule specifying how an interaction occurs. A coherent and comprehensive review is presented encompassing the rapid progress made recently in the analysis, understanding, and applications of coupling functions. The basic concepts and characteristics of coupling functions are presented through demonstrative examples of different domains, revealing the mechanisms and emphasizing their multivariate nature. The theory of coupling functions is discussed through gradually increasing complexity from strong and weak interactions to globally coupled systems and networks. A variety of methods that have been developed for the detection and reconstruction of coupling functions from measured data is described. These methods are based on different statistical techniques for dynamical inference. Stemming from physics, such methods are being applied in diverse areas of science and technology, including chemistry, biology, physiology, neuroscience, social sciences, mechanics, and secure communications. This breadth of application illustrates the universality of coupling functions for studying the interaction mechanisms of coupled dynamical systems.

Integrated methods for teaching population health.

PubMed

Sistrom, Maria Gilson; Zeigen, Laura; Jones, Melissa; Durham, Korana Fiol; Boudrot, Thomas

2011-01-01

The Institute of Medicine recommends reforms to public health education to better prepare the public health workforce. This study addresses the application of two of the recommended reforms in the population health nursing curriculum at one university: use of an ecological model and distance learning methods. Using interdisciplinary faculty, integrated teaching and learning methods, and a multimedia curriculum, this study examined the following question: can distance learning be designed to support learning goals and outcomes specific to an ecological approach and population health concepts in general? Course content was evaluated using students' perception of practice utility and understanding of population health concepts. Integrated teaching methods were evaluated using a scale as well as comparison to other student distance learning experiences within the university. Findings demonstrated that both the ecological model and distance learning methods were successfully used to teach population health to a large nursing student cohort. 2011, SLACK Incorporated.

Experimental Validation of the Dynamic Inertia Measurement Method to Find the Mass Properties of an Iron Bird Test Article

NASA Technical Reports Server (NTRS)

Chin, Alexander; Herrera, Claudia; Spivey, Natalie; Fladung, William; Cloutier, David

2015-01-01

This presentation describes the DIM method and how it measures the inertia properties of an object by analyzing the frequency response functions measured during a ground vibration test (GVT). The DIM method has been in development at the University of Cincinnati and has shown success on a variety of small scale test articles. The NASA AFRC version was modified for larger applications.

Application of innovative nondestructive methods to geotechnical and environmental investigations : final report, April 2003.

DOT National Transportation Integrated Search

2003-03-01

Geophysical surveys were conducted for the Missouri Department of Transportation (MoDOT) by the Department of Geology and Geophysics at the University of Missouri-Rolla. This report contains the results of several projects that utilized nondestructiv...

The significance of the quadratic Doppler effect for space travel and astrophysics

NASA Astrophysics Data System (ADS)

Boehm, M.

1985-09-01

It is shown that a distinct frame of reference exists for light for which the Kennedy-Thorndike experiment provides unequivocal evidence. This leads to the postulate of a rotating instead of an expanding universe. It is shown that the cosmic red shift can be understood as the result of a Coriolis acceleration of the light propagating between two arbitrary points of different gravitational potential. Methods for determining the angular velocity of the rotating universe are given, and it is discussed whether the speed of light and the gravitational constant are universal constants or whether they are functions of distance from the center of the universe. Suggestions are made for further experimental studies and for practical application of the quadratic Doppler effect.

Proceedings of the Antenna Applications Symposium (1982) Held at Illinois University at Urbana on 22-24 September 1982

DTIC Science & Technology

1983-01-01

1980 (this conference) attests to method , that in admittedly a phased b array context, and to method being a bit complex. Polarization control...Computation of the phase shift was made by two methods . The first used equations in Marcuvitz 4 for an E-plane waveguide bend, with changes in e i...made by adjustment of the waveguide width. The second method (Bahar-) requi-edi solving the wave equation in cylindrical coordinates. 28 Because the

New applications of the renormalization group method in physics: a brief introduction.

PubMed

Meurice, Y; Perry, R; Tsai, S-W

2011-07-13

The renormalization group (RG) method developed by Ken Wilson more than four decades ago has revolutionized the way we think about problems involving a broad range of energy scales such as phase transitions, turbulence, continuum limits and bifurcations in dynamical systems. The Theme Issue provides articles reviewing recent progress made using the RG method in atomic, condensed matter, nuclear and particle physics. In the following, we introduce these articles in a way that emphasizes common themes and the universal aspects of the method.

Development and Application of the p-version of the Finite Element Method.

DTIC Science & Technology

1985-11-21

this property hierarchic families of finite elements. The h-version of the finite element method has been the subject of inten- sive study since the...early 1950’s and perhaps even earlier. Study of the p-version of the finite element method, on the other hand, began at Washington University in St...Louis in the early 1970’s and led to a more recent study of * .the h-p version. Research in the p-version (formerly called The Constraint Method) has

Teaching practice of the course of Laser Principle and Application based on PBL mode

NASA Astrophysics Data System (ADS)

Li, Yongliang; Lv, Beibei; Wang, Siqi

2017-08-01

The primary task of university education is to stimulate students' autonomic learning and cultivate students' creative thinking. This paper put to use problem based learning (PBL) teaching mode, to enable students master flexible knowledge as the goal, and a detailed analysis of the implementation method and concrete measures of PBL teaching reform in the course of Laser Principle and Application, then compared with the former teaching methods. From the feedback of students and teaching experience, we get good teaching effect and prove the feasibility of PBL teaching mode in practice.

Simple morphological control over functional diversity of SERS materials

NASA Astrophysics Data System (ADS)

Semenova, A. A.; Goodilin, E. A.

2018-03-01

Nowadays, surface-enhanced Raman spectroscopy (SERS) becomes a promising universal low-cost and real-time tool in biomedical applications, medical screening or forensic analysis allowing for detection of different molecules below nanomolar concentrations. Silver nanoparticles and nanostructures have proven to be a common choice for SERS measurements due to a tunable plasmon resonance, high stability and facile fabrication methods. However, a proper design of silver-based nanomaterials for highly sensitive SERS applications still remains a challenge. In this work, effective and simple preparation methods of various silver nanostructures are proposed and systematically developed using aqueous diamminesilver (I) hydroxide as a precursor.

University of Tennessee Center for Space Transportation and Applied Research (CSTAR)

NASA Astrophysics Data System (ADS)

1995-10-01

The Center for Space Transportation and Applied Research had projects with space applications in six major areas: laser materials processing, artificial intelligence/expert systems, space transportation, computational methods, chemical propulsion, and electric propulsion. The closeout status of all these projects is addressed.

University of Tennessee Center for Space Transportation and Applied Research (CSTAR)

NASA Technical Reports Server (NTRS)

1995-01-01

The Center for Space Transportation and Applied Research had projects with space applications in six major areas: laser materials processing, artificial intelligence/expert systems, space transportation, computational methods, chemical propulsion, and electric propulsion. The closeout status of all these projects is addressed.

An "Environmental Issues in Agronomy" Course.

ERIC Educational Resources Information Center

Barbarick, K. A.

1992-01-01

Describes and evaluates the format and grading procedure of an Environmental Agronomy course offered at Colorado State University. Teaching methods include videotape use, field trips, and lectures addressing topics such as integrated pest management, land application of sewage sludge, pesticide degradation, and organic farming. Standard course…

Designing Electronic Performance Support Systems To Facilitate Learning.

ERIC Educational Resources Information Center

van Schaik, Paul; Pearson, Robert; Barker, Philip

2002-01-01

Discussion of electronic performance support systems (EPSS) focuses on an application within the domain of quantitative research methods as taught in a university psychology course. Describes the design and implementation of the system and outlines results of an evaluative study of the EPSS. (Author/LRW)

Applications of ions produced by low intensity repetitive laser pulses for implantation into semiconductor materials

NASA Astrophysics Data System (ADS)

Wołowski, J.; Badziak, J.; Czarnecka, A.; Parys, P.; Pisarek, M.; Rosinski, M.; Turan, R.; Yerci, S.

This work reports experiment concerning specific applications of implantation of laser-produced ions for production of semiconductor nanocrystals. The investigation was carried out in the IPPLM within the EC STREP `SEMINANO' project. A repetitive pulse laser system of parameters: energy up to 0.8 J in a 3.5 ns-pulse, wavelength of 1.06 μ m, repetition rate of up to 10 Hz, has been employed in these investigations. The characterisation of laser-produced ions was performed with the use of `time-of-flight' ion diagnostics simultaneously with other diagnostic methods in dependence on laser pulse parameters, illumination geometry and target material. The properties of laser-implanted and modified SiO2 layers on sample surface were characterised with the use of different methods (XPS + ASD, Raman spectroscopy, PL spectroscopy) at the Middle East Technological University in Ankara and at the Warsaw University of Technology. The production of the Ge nanocrystallites has been demonstrated for annealed samples prepared in different experimental conditions.

Seven Keys for Implementing the Self-Evaluation, Periodic Evaluation and Accreditation (AVA) Method, to Improve Quality and Student Satisfaction in the Italian Higher Education System

ERIC Educational Resources Information Center

Murmura, Federica; Casolani, Nicola; Bravi, Laura

2016-01-01

This paper develops a theoretical framework that could facilitate the application of the Autovalutazione, Valutazione periodica, Accreditamento (AVA) method in Italian universities, trying to simplify the use of this approach, and to cover the existing gap between Italy and others European academic institutions. The new competitive environment in…

The roles of nearest neighbor methods in imputing missing data in forest inventory and monitoring databases

Treesearch

Bianca N. I. Eskelson; Hailemariam Temesgen; Valerie Lemay; Tara M. Barrett; Nicholas L. Crookston; Andrew T. Hudak

2009-01-01

Almost universally, forest inventory and monitoring databases are incomplete, ranging from missing data for only a few records and a few variables, common for small land areas, to missing data for many observations and many variables, common for large land areas. For a wide variety of applications, nearest neighbor (NN) imputation methods have been developed to fill in...

Superestructuras en el universo: caracterización e identificación en el catálgo SDSS-DR7

NASA Astrophysics Data System (ADS)

Luparello, H. E.; Lares, M.; García Lambas, D.; Padilla, N.

Superclusters are the largest gravitationally bound systems in the Universe. These structures are not presently virialized, so the application of theoreti- cal arguments in their identification is not straightforward. Luparello et al., (2011) present an identification method and establish the values of the pa- rameters in order to ensure that superstructures in the present Universe will evolve into virialized structures. In this work we define and characterize the largest structures in the Universe, in the framework of the cosmological model CDM. We briefly describe the Future Virialized Structures (FVS) identification method applied to the seventh data release of the Sloan Dig- ital Sky Survey (SDSS-DR7, Abazajian et al., 2009) in the redshift range 0.04 < z < 0.12 and present the main properties of the FVS catalogue. FULL TEXT IN SPANISH

76 FR 9752 - Stanford University, et al.; Notice of Consolidated Decision on Applications for Duty-Free Entry...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-22

... DEPARTMENT OF COMMERCE International Trade Administration Stanford University, et al.; Notice of... Constitution Avenue., NW., Washington, DC. Docket Number: 10-070. Applicant: Stanford University, Stanford CA... notice at 76 FR 2647, January 14, 2011. Docket Number: 10-071. Applicant: Stanford University, Stanford...

User Requirements Analysis For Digital Library Application Using Quality Function Deployment.

NASA Astrophysics Data System (ADS)

Wulandari, Lily; Sularto, Lana; Yusnitasari, Tristyanti; Ikasari, Diana

2017-03-01

This study attemp to build Smart Digital Library to be used by the wider community wherever they are. The system is built in the form of Smart Digital Library portal which uses semantic similarity method (Semantic Similarity) to search journals, articles or books by title or author name. This method is also used to determine the recommended books to be read by visitors of Smart Digital Library based on testimony from a previous reader automatically. Steps being taken in the development of Smart Digital Library system is the analysis phase, design phase, testing and implementation phase. At this stage of the analysis using WebQual for the preparation of the instruments to be distributed to the respondents and the data obtained from the respondents will be processed using Quality Function Deployment. In the analysis phase has the purpose of identifying consumer needs and technical requirements. The analysis was performed to a digital library on the web digital library Gunadarma University, Bogor Institute of Agriculture, University of Indonesia, etc. The questionnaire was distributed to 200 respondents. The research methodology begins with the collection of user requirements and analyse it using QFD. Application design is funded by the government through a program of Featured Universities Research by the Directorate General of Higher Education (DIKTI). Conclusions from this research are identified which include the Consumer Requirements of digital library application. The elements of the consumers requirements consists of 13 elements and 25 elements of Engineering Characteristics digital library requirements. Therefore the design of digital library applications that will be built, is designed according to the findings by eliminating features that are not needed by restaurant based on QFD House of Quality.

Research and application of mobile teaching platform

NASA Astrophysics Data System (ADS)

Yang, Ping; Xue, Hongjiao

2017-08-01

The application of mobile technology in university digital campus is ripe. This article mainly introduced the necessity of teaching platform based on mobile Internet in the teaching of higher vocational education, and the key to the construction of the feasibility of mobile learning platform, which is a feasible and effective teaching model under the new situation, worthy of promotion. The design and application of teaching platform based on mobile Internet is the change of educational ideas and working methods, and is the new starting point of Higher Vocational education.

The research progress on Hodograph Method of aerodynamic design at Tsinghua University

NASA Technical Reports Server (NTRS)

Chen, Zuoyi; Guo, Jingrong

1991-01-01

Progress in the use of the Hodograph method of aerodynamic design is discussed. It was found that there are some restricted conditions in the application of Hodograph design to transonic turbine and compressor cascades. The Hodograph method is suitable not only to the transonic turbine cascade but also to the transonic compressor cascade. The three dimensional Hodograph method will be developed after obtaining the basic equation for the three dimensional Hodograph method. As an example of the Hodograph method, the use of the method to design a transonic turbine and compressor cascade is discussed.

Modification of the Fox method to predict maximum oxygen uptake in female university students of Kolkata, India.

PubMed

Bandyopadhyay, Amit

2011-12-01

The present study was aimed to develop a simple method, i.e. the modified Fox test protocol (MFT) to predict VO2(max) in female sedentary university students of Kolkata, India. One hundred and eleven (111) healthy untrained female students of the University of Calcutta (mean age, body height and body mass of 22.76 ± 1.72 years, 163.52 ± 4.70 cm and 53.03 ± 3.78 kg, respectively) were randomly sampled for the study. They were further randomly divided into the study group (n = 60) and confirmatory group (n = 51). Direct estimation of the maximum oxygen uptake (VO2(max)) comprised an incremental bicycle exercise followed by expired gas analysis by the Scholander micro-gas analyzer. The submaximal heart rate (HR(sub)) was measured at the completion of five min of exercise at 110W workload. HR(sub) exhibited significant negative correlation (r = -0.87, P < 0.001) with VO2(max). Application of the computed norm in the confirmatory group depicted insignificant difference between VO2(max) and predicted VO2(max) or PVO2(max). Limits of agreement between PVO2(max) and VO2(max) were substantially small. The standard error of estimate of the norm was also substantially small. From the present study, MFT is recommended for application in the sedentary female university students for accurate and reliable assessment of cardiorespiratory fitness in terms of VO2(max).

Comparing Computer-Adaptive and Curriculum-Based Measurement Methods of Assessment

ERIC Educational Resources Information Center

Shapiro, Edward S.; Gebhardt, Sarah N.

2012-01-01

This article reported the concurrent, predictive, and diagnostic accuracy of a computer-adaptive test (CAT) and curriculum-based measurements (CBM; both computation and concepts/application measures) for universal screening in mathematics among students in first through fourth grade. Correlational analyses indicated moderate to strong…

A Course Model for Teaching Research Evaluation in Colleges of Pharmacy.

ERIC Educational Resources Information Center

Draugalis, JoLaine R.; Slack, Marion K.

1992-01-01

A University of Arizona undergraduate pharmacy course designed to develop student skills in evaluation of research has five parts: introduction to the scientific method; statistical techniques/data analysis review; research design; fundamentals of clinical studies; and practical applications. Prerequisites include biostatistics and drug…

A Terminal Pharmaceutics Course in Clinical Pharmacokinetics.

ERIC Educational Resources Information Center

Reuning, Richard H.; Krautheim, Daniel

1978-01-01

At Ohio State University, an undergraduate course extends the course sequence in biopharmaceutics and pharmacokinetics to application to problems in optimizing drug therapy. Course content, structure, instructional methods, and student term projects are described, and a course outline, typical projects, and some behavioral objectives are appended.…

What Matters Most: Factors Influencing the University Application Choice Decisions of Korean International Students and Parents

ERIC Educational Resources Information Center

Parslow, Breanna

2014-01-01

The purpose of this study is to determine factors influencing Korean parents' and students' university application choice decisions in three international schools in the Republic of Korea (South). Institutional and individual factors that influenced Korean students' university application choice decisions and their parents' university application…

78 FR 77424 - University of Virginia, et al.; Notice of Consolidated Decision on Applications for Duty-Free...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-23

... DEPARTMENT OF COMMERCE International Trade Administration University of Virginia, et al.; Notice... Constitution Avenue NW., Washington, DC. Docket Number: 13-025. Applicant: University of Virginia.... Intended Use: See notice at 78 FR 52760, August 26, 2013. Docket Number: 13-026. Applicant: Yale University...

Application of 4G wireless network-based system for remote diagnosis and nursing of stomal complications

PubMed Central

Xu, Xiulian; Cao, Yingjuan; Luan, Xiaorong

2014-01-01

Background: This study aims to apply 4G wireless network in the remote diagnosis of stoma complications for the first time. Background: Remote diagnosis and nursing care for a variety of illnesses are urgently needed in clinical settings. Objectives: Combining with relevant clinical manifestations, an Android phone-based intelligent diagnosis system was designed to construct a universe, easy access to exploitation and human-computer interaction database and exploitation environment for applications and programs. Methods: “Production rule” and forward reasoning method were utilized to design arborescence structures and logic reasoner associated with stoma complications. Stoma physicians were responsible for delivering evaluation scores on patients’ health status using analytic hierarchy process. The emphasis of this study is to exploit an “Android phone-based system for remote diagnosis of stoma”, which is of certain universe usage. Results: Such system was tested in the Medicine Information Center of Qilu Hospital of Shandong University and initially applied in the city of De Zhou, Shandong province, China. Conclusions: These results collectively demonstrated that the system is easy to carry, of high utility and free from the limitations of wire network environment, etc. It provides clinical evidence for establishing a novel type model for the exchange between patients and physicians. PMID:25550986

Exploring Ethnic Inequalities in Admission to Russell Group Universities

PubMed Central

Boliver, Vikki

2015-01-01

This article analyses national university applications and admissions data to explore why ethnic minority applicants to Russell Group universities are less likely to receive offers of admission than comparably qualified white applicants. Contrary to received opinion, the greater tendency of ethnic minorities to choose highly numerically competitive degree subjects only partially accounts for their lower offer rates from Russell Group universities relative to white applicants with the same grades and ‘facilitating subjects’ at A-level. Moreover, ethnic inequalities in the chances of receiving an admissions offer from a Russell Group university are found to be greater in relation to courses where ethnic minorities make up a larger percentage of applicants. This latter finding raises the possibility that some admissions selectors at some Russell Group universities may be unfairly rejecting a proportion of their ethnic minority applicants in an attempt to achieve a more ethnically representative student body. PMID:27904229

Quality Management for Educational Technology Services: A Guide to Application of the Deming Management Method for District, University and Regional Media and Technology Centers.

ERIC Educational Resources Information Center

Richie, Mark L.

This book shows how the quality management approach pioneered in Japan by Dr. W. Edwards Deming allows educational service centers to expand services and be more flexible by reducing waste and rework. Deming's method shows how to change from reactive management to a dynamic system of continuous improvement that restores worker pride, increases…

Optical inspection methods and their applications in the manufactured industrial sector: knowledge transfer to Panamanian industry

NASA Astrophysics Data System (ADS)

Pino, Abdiel O.; Pladellorens, Josep

2014-07-01

A means of facilitating the transfer of Optical inspection methods knowledge and skills from academic institutions and their research partners into Panama optics and optical research groups is described. The process involves the creation of an Integrated Knowledge Group Research (IKGR), a partnership led by Polytechnic University of Panama with the support of the SENACYT and Optics and Optometry Department, Polytechnic University of Catalonia. This paper describes the development of the Project for knowledge transfer "Implementation of a method of optical inspection of low cost for improving the surface quality of rolled material of metallic and nonmetallic industrial use", this project will develop a method for measuring the surface quality using texture analysis speckle pattern formed on the surface to be characterized. The project is designed to address the shortage of key skills in the field of precision engineering for optical applications. The main issues encountered during the development of the knowledge transfer teaching and learning are discussed, and the outcomes from the first four months of knowledge transfer activities are described. In overall summary, the results demonstrate how the Integrated Knowledge Group Research and new approach to knowledge transfer has been effective in addressing the engineering skills gap in precision optics for manufactured industrial sector.

Do Tuition Fees Affect the Mobility of University Applicants? Evidence from a Natural Experiment

ERIC Educational Resources Information Center

Dwenger, Nadja; Storck, Johanna; Wrohlich, Katharina

2012-01-01

Several German states recently introduced tuition fees for university education. We investigate whether these tuition fees influence the mobility of university applicants. Based on administrative data of applicants for medical schools in Germany, we estimate the effect of tuition fees on the probability of applying for a university in the home…

The Calculus of a Vase

ERIC Educational Resources Information Center

Scherger, Nicole

2012-01-01

Of the most universal applications in integral calculus are those involved with finding volumes of solids of revolution. These profound problems are typically taught with traditional approaches of the disk and shell methods, after which most calculus curriculums will additionally cover arc length and surfaces of revolution. Even in these visibly…

INDUSTRIAL RADIOGRAPHY COURSE, INSTRUCTOR'S GUIDE, VOLUME 1.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Engineering Extension Service.

THE PURPOSE OF THE GUIDE IS TO GIVE MAXIMUM ASSISTANCE TO INSTRUCTORS IN PLANNING THE TRAINING OF LICENSED INDUSTRIAL RADIOGRAPHERS. IT WAS DEVELOPED BY THE ENGINEERING EXTENSION SERVICE, TEXAS AGRICULTURAL AND MECHANICAL UNIVERSITY, COLLEGE STATION, TEXAS. THE 21 UNITS INCLUDE (1) INDUSTRIAL APPLICATIONS, (2) NONDESTRUCTIVE TESTING METHODS, (3)…

Using Key Performance Indicators to Drive Strategic Decision Making.

ERIC Educational Resources Information Center

Dolence, Michael G.; Norris, Donald M.

1994-01-01

A nine-step method for defining and pursuing key performance indicators (KPIs), derived from a strategic planning process, is outlined, and its applications at the University of Northern Colorado and Illinois Benedictine College are described and tabulated. A chart summarizes current and projected KPIs for Illinois Benedictine College for each…

Vortex-Lattice Utilization. [in aeronautical engineering and aircraft design

NASA Technical Reports Server (NTRS)

1976-01-01

The many novel, innovative, and unique implementations and applications of the vortex-lattice method to aerodynamic design and analysis which have been performed by Industry, Government, and Universities were presented. Although this analytical tool is not new, it continues to be utilized and refined in the aeronautical community.

Undergraduate Professors' Pedagogical Content Knowledge: The Case of "Amount of Substance"

ERIC Educational Resources Information Center

Padilla, Kira; Ponce-de-Leon, Ana Maria; Rembado, Florencia Mabel; Garritz, Andoni

2008-01-01

This paper documents the pedagogical content knowledge (PCK) of four university professors in General Chemistry for the topic "amount of substance"; a fundamental quantity of the International System of Units (SI). The research method involved the development of a Content Representation and the application of Mortimer's Conceptual…

78 FR 21913 - Magnuson-Stevens Act Provisions; General Provisions for Domestic Fisheries; Application for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-12

... limits. The compensation fishing is in support of a 2012 Monkfish Research Set- Aside project that is attempting to validate monkfish aging methods. The project is being conducted by the University of Massachusetts, Dartmouth, School for Marine Science and Technology. Regulations under the Magnuson-Stevens...

78 FR 38693 - Magnuson-Stevens Act Provisions; General Provisions for Domestic Fisheries; Application for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-27

... limits. The compensation fishing is in support of a 2013 Monkfish Research Set- Aside project that is attempting to validate monkfish aging methods. The project is being conducted by the University of Massachusetts, Dartmouth, School for Marine Science and Technology. Regulations under the Magnuson-Stevens...

Preventing chemotherapy-induced alopecia.

PubMed

Smith, F P; McCabe, M S

1983-07-01

Chemotherapy-induced alopecia is now potentially preventable. Although scalp tourniquets and hypothermia are neither universally applicable nor always successful, they represent simple and relatively inexpensive methods for reducing hair loss. When successful, these techniques help maintain the patient's self-image and thereby diminish the devastating psychologic effects that accompany a diagnosis of cancer.

Teaching Competencies Efficiently through the Internet--A Practical Example

ERIC Educational Resources Information Center

Caniels, Marjolein C. J.

2005-01-01

Universities increasingly adopt innovative teaching models, which focus on the development of skills instead of the reproduction of knowledge. These new teaching models emphasise the importance of knowledge application and the development of competencies. Yet, using these teaching methods usually implies a high assessment burden for lecturers.…

Pharmaceutical Technology Clerkship: A Professional Elective Course at the University of Kentucky

ERIC Educational Resources Information Center

Im, Sophann; DeLuca, Patrick P.

1978-01-01

Three objectives are described: (1) teach methods for applying the principles of pharmaceutical technology to institutional services involving drug safety, efficacy, and administration; (2) develop student skills in drug-delivery systems within hospitals; and (3) encourage technology application within a clinical setting for better patient care.…

Ultrasonically-Induced Vaporization of Perfluorocarbon Droplets for Occlusion Therapy of Breast Cancer

DTIC Science & Technology

2004-06-01

lithotripsy applications. Their focusing process can be iterated to work on several point beacons. Other methods compute the angular spectrum, i.e., the...99 [10] Hutton, S., P. 1972 Inaugural Lecture University of Southampton [11] Trevena, D. H. (1984). “Cavitation and the Generation of Tension in

[New intensifying screens in clinical radiology. II. Examinations in clinical practice].

PubMed

Freyschmidt, J; Saure, D; Hagemann, G

1976-09-01

A clinically applicable procedure for testing new intensifying rare earth screens, as well as the special Siemens' screen is described. The results are related to universal screens. The film-screen combination alpha 4XD (gadolinium oxysulphide with normal, green sensitive film) results in a reduction of radiation dose to half with detail comparable with universal screens. The Siemens' special screen has similar advantages. Screens with a higher intensification factor and reduction of the mAs to one sixth results in loss of detail. This does not necessarily reduce their clinical use if they are used for appropriate purposes. The results of this clinically orientated technique agreed well with physically objective methods using lead grids. The advantages of the new screens are discussed in terms of their practical application.

The application of biotechnological methods in authenticity testing.

PubMed

Popping, Bert

2002-09-11

By counterfeiting brand names in the food and drink industry as well as fraudulently labelling and selling low quality products as premium products, this sector of the industry has lost significant amounts of money and the consumer has been deceived. While it was difficult to establish certain types of fraud before the advent of modern biotechnology, DNA-based methods make an important contribution to protect high-quality brand names and protect the consumer. Several years ago, DNA technologies were considered as methods used in universities, primarily for research purpose, not so much for 'real-life' applications. However, this has changed and a number of laboratories have specialised in offering such services to the industry. This article will review DNA-based techniques commonly used for authenticity testing.

Acceleration of low order finite element computation with GPUs (Invited)

NASA Astrophysics Data System (ADS)

Knepley, M. G.

2010-12-01

Considerable effort has been focused on the acceleration using GPUs of high order spectral element methods and discontinuous Galerkin finite element methods. However, these methods are not universally applicable, and much of the existing FEM software base employs low order methods. In this talk, we present a formulation of FEM, using the PETSc framework from ANL, which is amenable to GPU acceleration even at very low order. In addition, using the FEniCS system for FEM, we show that the relevant kernels can be automatically generated and optimized using a symbolic manipulation system.

Optimized universal color palette design for error diffusion

NASA Astrophysics Data System (ADS)

Kolpatzik, Bernd W.; Bouman, Charles A.

1995-04-01

Currently, many low-cost computers can only simultaneously display a palette of 256 color. However, this palette is usually selectable from a very large gamut of available colors. For many applications, this limited palette size imposes a significant constraint on the achievable image quality. We propose a method for designing an optimized universal color palette for use with halftoning methods such as error diffusion. The advantage of a universal color palette is that it is fixed and therefore allows multiple images to be displayed simultaneously. To design the palette, we employ a new vector quantization method known as sequential scalar quantization (SSQ) to allocate the colors in a visually uniform color space. The SSQ method achieves near-optimal allocation, but may be efficiently implemented using a series of lookup tables. When used with error diffusion, SSQ adds little computational overhead and may be used to minimize the visual error in an opponent color coordinate system. We compare the performance of the optimized algorithm to standard error diffusion by evaluating a visually weighted mean-squared-error measure. Our metric is based on the color difference in CIE L*AL*B*, but also accounts for the lowpass characteristic of human contrast sensitivity.

75 FR 23753 - Combined Notice of Filings #2

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-04

... Numbers: QF10-13-000. Applicants: Cornell University. Description: Self Certification of Cogeneration Facility Cornell University (NY). Filed Date: 10/08/2009. Accession Number: 20091008-5041. Comment Date... Applicable. Docket Numbers: QF10-431-000. Applicants: Oregon State University. Description: Self...

Development and validation of a multi-locus DNA metabarcoding method to identify endangered species in complex samples.

PubMed

Arulandhu, Alfred J; Staats, Martijn; Hagelaar, Rico; Voorhuijzen, Marleen M; Prins, Theo W; Scholtens, Ingrid; Costessi, Adalberto; Duijsings, Danny; Rechenmann, François; Gaspar, Frédéric B; Barreto Crespo, Maria Teresa; Holst-Jensen, Arne; Birck, Matthew; Burns, Malcolm; Haynes, Edward; Hochegger, Rupert; Klingl, Alexander; Lundberg, Lisa; Natale, Chiara; Niekamp, Hauke; Perri, Elena; Barbante, Alessandra; Rosec, Jean-Philippe; Seyfarth, Ralf; Sovová, Tereza; Van Moorleghem, Christoff; van Ruth, Saskia; Peelen, Tamara; Kok, Esther

2017-10-01

DNA metabarcoding provides great potential for species identification in complex samples such as food supplements and traditional medicines. Such a method would aid Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES) enforcement officers to combat wildlife crime by preventing illegal trade of endangered plant and animal species. The objective of this research was to develop a multi-locus DNA metabarcoding method for forensic wildlife species identification and to evaluate the applicability and reproducibility of this approach across different laboratories. A DNA metabarcoding method was developed that makes use of 12 DNA barcode markers that have demonstrated universal applicability across a wide range of plant and animal taxa and that facilitate the identification of species in samples containing degraded DNA. The DNA metabarcoding method was developed based on Illumina MiSeq amplicon sequencing of well-defined experimental mixtures, for which a bioinformatics pipeline with user-friendly web-interface was developed. The performance of the DNA metabarcoding method was assessed in an international validation trial by 16 laboratories, in which the method was found to be highly reproducible and sensitive enough to identify species present in a mixture at 1% dry weight content. The advanced multi-locus DNA metabarcoding method assessed in this study provides reliable and detailed data on the composition of complex food products, including information on the presence of CITES-listed species. The method can provide improved resolution for species identification, while verifying species with multiple DNA barcodes contributes to an enhanced quality assurance. © The Authors 2017. Published by Oxford University Press.

Prospects for the application of radiometric methods in the measurement of two-phase flows

NASA Astrophysics Data System (ADS)

Zych, Marcin

2018-06-01

The article constitutes an overview of the application of radiometric methods in the research of two-phase flows: liquid-solid particles and liquid-gas flows. The methods which were used were described on the basis of the experiments which were conducted in the Water Laboratory of the Wrocław University of Environmental and Life Sciences and in the Sedimentological Laboratory of the Faculty of Geology, Geophysics and Environmental Protection, AGH-UST in Kraków. The advanced mathematical methods for the analysis of signals from scintillation probes that were applied enable the acquisition of a number of parameters associated with the flowing two-phase mixture, such as: average velocities of the particular phases, concentration of the solid phase, and void fraction for a liquid-gas mixture. Despite the fact that the application of radioactive sources requires considerable carefulness and a number of state permits, in many cases these sources become useful in the experiments which are presented.

Computational and analytical methods in nonlinear fluid dynamics

NASA Astrophysics Data System (ADS)

Walker, James

1993-09-01

The central focus of the program was on the application and development of modern analytical and computational methods to the solution of nonlinear problems in fluid dynamics and reactive gas dynamics. The research was carried out within the Division of Engineering Mathematics in the Department of Mechanical Engineering and Mechanics and principally involved Professors P.A. Blythe, E. Varley and J.D.A. Walker. In addition. the program involved various international collaborations. Professor Blythe completed work on reactive gas dynamics with Professor D. Crighton FRS of Cambridge University in the United Kingdom. Professor Walker and his students carried out joint work with Professor F.T. Smith, of University College London, on various problems in unsteady flow and turbulent boundary layers.

Development of HRO interferometer at Kochi University of Technology

NASA Astrophysics Data System (ADS)

Yamamoto, Masa-Yuki; Horiuchi, Hirotaka; Okamoto, Goro; Hamaguchi, Haruko; Noguchi, Kazuya

2007-12-01

As a typical radio meteor observation method, the Ham-band Radio meteor Observation (HRO) has been spread to many amateur meteor observers in the world, resulting in worldwide continuous detection of each meteor echo at precise time of appearance in any weather condition as well as in daytime. However, direction finding of incoming electromagnetic waves by meteors is difficult to obtain by a usual HRO system. An application of HRO with interferometer technique was developed in 2004-2005 in Kochi University of Technology (KUT), Japan. Within a context of the forwardscattering radar method, an HRO interferometer (HRO-IF) with 3 antennas was developed. Detailed structure of the HRO-IF system at KUT as well as calibration experiments of establishing accurate direction determination are presented.

How far is it? Distance measurements and their consequences

NASA Astrophysics Data System (ADS)

Krełowski, Jacek

2017-08-01

Methods of measuring distances to objects in our Milky Way are briefly discussed. They generally base on three principles: of using a standard rod, of standard candle and of column density of interstellar matter. Weak and strong points of these methods are presented. The presence of gray extinction towards some objects is suggested which makes the most universal method of standard candle (spectroscopic parallax) very uncertain. Hard to say whether gray extinc-tion appears only in the form of circumstellar debris discs or is present also in the general interstellar medium. The application of the method of measuring column densities of interstellar gases suggests that the rotation curve of our Milky Way system is rather Keplerian than flat which creates doubts as to whether any Dark Matter halo is present around our Galaxy. It is emphasized that the most universal method, i.e. that of standard candle, used to estimate distances to cosmological objects, may suffer serious errors because of improper subtraction of extinction effects.

Application of Grey Model GM(1, 1) to Ultra Short-Term Predictions of Universal Time

NASA Astrophysics Data System (ADS)

Lei, Yu; Guo, Min; Zhao, Danning; Cai, Hongbing; Hu, Dandan

2016-03-01

A mathematical model known as one-order one-variable grey differential equation model GM(1, 1) has been herein employed successfully for the ultra short-term (<10days) predictions of universal time (UT1-UTC). The results of predictions are analyzed and compared with those obtained by other methods. It is shown that the accuracy of the predictions is comparable with that obtained by other prediction methods. The proposed method is able to yield an exact prediction even though only a few observations are provided. Hence it is very valuable in the case of a small size dataset since traditional methods, e.g., least-squares (LS) extrapolation, require longer data span to make a good forecast. In addition, these results can be obtained without making any assumption about an original dataset, and thus is of high reliability. Another advantage is that the developed method is easy to use. All these reveal a great potential of the GM(1, 1) model for UT1-UTC predictions.

Integrating medical, assistive, and universal design products and technologies: Assistive Technology Service Method (ATSM).

PubMed

Elsaesser, Linda-Jeanne; Bauer, Stephen

2012-07-01

ISO26000 provides guidance on effective organizational performance that recognizes social responsibility (including rights of persons with disabilities (PWD)), engages stakeholders, and contributes to sustainable development [1]. Millennium Development Goals 2010 state: while progress has been made, insufficient dedication to sustainable development, and inequalities to the most vulnerable people require attention [2]. World Report on Disability 2011 recommendations includes improved data collection and removal of barriers to rehabilitation that empower PWD [3]. The Assistive Technology Service Method (ATSM), Assistive Technology Device Classification (ATDC) and Matching Person and Technology (MPT) provide an evidence-based, standardized, internationally comparable framework to improve rehabilitation interventions [4-6]. The ATSM and ATDC support universal design (UD) principles and provision of universal technology. The MPT assures interventions are effective and satisfactory to end-users [7]. The ICF conceptual framework and common language are used throughout [8]. Research findings on healthcare needs are translated. ATSM applications in support of these findings are presented. National initiatives demonstrate the need and value of the ATSM as an evidence-based, user-centric, interdisciplinary method to improve individual and organizational performance for rehabilitation [including AT] services. Two Disability & Rehabilitation: Assistive Technology articles demonstrate ATSM and ATDC use to strengthen rehabilitation services and integrate Universal Design principles for socially responsible behavior.

Universal Method for Creating Hierarchical Wrinkles on Thin-Film Surfaces.

PubMed

Jung, Woo-Bin; Cho, Kyeong Min; Lee, Won-Kyu; Odom, Teri W; Jung, Hee-Tae

2018-01-10

One of the most interesting topics in physical science and materials science is the creation of complex wrinkled structures on thin-film surfaces because of their several advantages of high surface area, localized strain, and stress tolerance. In this study, a significant step was taken toward solving limitations imposed by the fabrication of previous artificial wrinkles. A universal method for preparing hierarchical three-dimensional wrinkle structures of thin films on a multiple scale (e.g., nanometers to micrometers) by sequential wrinkling with different skin layers was developed. Notably, this method was not limited to specific materials, and it was applicable to fabricating hierarchical wrinkles on all of the thin-film surfaces tested thus far, including those of metals, two-dimensional and one-dimensional materials, and polymers. The hierarchical wrinkles with multiscale structures were prepared by sequential wrinkling, in which a sacrificial layer was used as the additional skin layer between sequences. For example, a hierarchical MoS 2 wrinkle exhibited highly enhanced catalytic behavior because of the superaerophobicity and effective surface area, which are related to topological effects. As the developed method can be adopted to a majority of thin films, it is thought to be a universal method for enhancing the physical properties of various materials.

Universal scheme for finite-probability perfect transfer of arbitrary multispin states through spin chains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Man, Zhong-Xiao, E-mail: zxman@mail.qfnu.edu.cn; An, Nguyen Ba, E-mail: nban@iop.vast.ac.vn; Xia, Yun-Jie, E-mail: yjxia@mail.qfnu.edu.cn

In combination with the theories of open system and quantum recovering measurement, we propose a quantum state transfer scheme using spin chains by performing two sequential operations: a projective measurement on the spins of ‘environment’ followed by suitably designed quantum recovering measurements on the spins of interest. The scheme allows perfect transfer of arbitrary multispin states through multiple parallel spin chains with finite probability. Our scheme is universal in the sense that it is state-independent and applicable to any model possessing spin–spin interactions. We also present possible methods to implement the required measurements taking into account the current experimental technologies.more » As applications, we consider two typical models for which the probabilities of perfect state transfer are found to be reasonably high at optimally chosen moments during the time evolution. - Highlights: • Scheme that can achieve perfect quantum state transfer is devised. • The scheme is state-independent and applicable to any spin-interaction models. • The scheme allows perfect transfer of arbitrary multispin states. • Applications to two typical models are considered in detail.« less

Piece-wise quadratic approximations of arbitrary error functions for fast and robust machine learning.

PubMed

Gorban, A N; Mirkes, E M; Zinovyev, A

2016-12-01

Most of machine learning approaches have stemmed from the application of minimizing the mean squared distance principle, based on the computationally efficient quadratic optimization methods. However, when faced with high-dimensional and noisy data, the quadratic error functionals demonstrated many weaknesses including high sensitivity to contaminating factors and dimensionality curse. Therefore, a lot of recent applications in machine learning exploited properties of non-quadratic error functionals based on L 1 norm or even sub-linear potentials corresponding to quasinorms L p (0

75 FR 51239 - University of Massachusetts Amherst, et al.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-19

... DEPARTMENT OF COMMERCE International Trade Administration University of Massachusetts Amherst, et... Commerce, 14th and Constitution Avenue., NW., Washington, DC. Docket Number: 10-044. Applicant: University.... Applicant: Appalachian State University, Boone, NC 28608. Instrument: Electron Microscope. Manufacturer...

SIFT-MS and FA-MS methods for ambient gas phase analysis: developments and applications in the UK.

PubMed

Smith, David; Španěl, Patrik

2015-04-21

Selected ion flow tube mass spectrometry, SIFT-MS, a relatively new gas/vapour phase analytical method, is derived from the much earlier selected ion flow tube, SIFT, used for the study of gas phase ion-molecule reactions. Both the SIFT and SIFT-MS techniques were conceived and developed in the UK, the former at Birmingham University, the latter at Keele University along with the complementary flowing afterglow mass spectrometry, FA-MS, technique. The focus of this short review is largely to describe the origins, developments and, most importantly, the unique features of SIFT-MS as an analytical tool for ambient analysis and to indicate its growing use to analyse humid air, especially exhaled breath, its unique place as a on-line, real time analytical method and its growing use and applications as a non-invasive diagnostic in clinical diagnosis and therapeutic monitoring, principally within several UK universities and hospitals, and briefly in the wider world. A few case studies are outlined that show the potential of SIFT-MS and FA-MS in the detection and quantification of metabolites in exhaled breath as a step towards recognising pathophysiology indicative of disease and the presence of bacterial and fungal infection of the airways and lungs. Particular cases include the detection of Pseudomonas aeruginosa infection of the airways of patients with cystic fibrosis (SIFT-MS) and the measurement of total body water in patients with chronic kidney disease (FA-MS). The growing exploitation of SIFT-MS in other areas of research and commerce are briefly listed to show the wide utility of this unique UK-developed analytical method, and future prospects and developments are alluded to.

An extensible and successful method of identifying collaborators for National Library of Medicine informationist projects

PubMed Central

Williams, Jeff D.; Rambo, Neil H.

2015-01-01

Question/Purpose The New York University (NYU) Health Sciences Library used a new method to arrange in-depth discussions with basic science researchers. The objective was to identify collaborators for a new National Library of Medicine administrative supplement. Setting The research took place at the NYU Health Sciences Library. Methods Using the National Institutes of Health (NIH) RePORTER, forty-four researchers were identified and later contacted through individualized emails. Results Nine researchers responded to the email followed by six in-person or phone discussions. At the conclusion of this process, two researchers submitted applications for supplemental funding, and both of these applications were successful. Conclusions This method confirmed these users could benefit from the skills and knowledge of health sciences librarians, but they are largely unaware of this. PMID:26213507

Nanospikes functionalization as a universal strategy to disperse hydrophilic particles in non-polar media.

PubMed

Hang, Tian; Chen, Hui-Jiuan; Wang, Ji; Lin, Di-An; Wu, Jiangming; Liu, Di; Cao, Yuhong; Yang, Chengduan; Liu, Chenglin; Xiao, Shuai; Gu, Meilin; Pan, Shuolin; Wu, Mei X; Xie, Xi

2018-05-04

Dispersion of hydrophilic particles in non-polar media has many important applications yet remains difficult. Surfactant or amphiphilic functionalization was conventionally applied to disperse particles but is highly dependent on the particle/solvent system and may induce unfavorable effects and impact particle hydrophilic nature. Recently 2 μm size polystyrene microbeads coated with ZnO nanospikes have been reported to display anomalous dispersity in phobic media without using surfactant or amphiphilic functionalization. However, due to the lack of understanding whether this phenomenon was applicable to a wider range of conditions, little application has been derived from it. Here the anomalous dispersity phenomenons of hydrophilic microparticles covered with nanospikes were systematically assessed at various conditions including different particle sizes, material compositions, particle morphologies, solvent hydrophobicities, and surface polar groups. Microparticles were functionalized with nanospikes through hydrothermal route, followed by dispersity test in hydrophobic media. The results suggest nanospikes consistently prevent particle aggregation in various particle or solvent conditions, indicating the universal applicability of the anomalous dispersion phenomenons. This work provides insight on the anomalous dispersity of hydrophilic particles in various systems and offers potential application to use this method for surfactant-free dispersions.

Nanospikes functionalization as a universal strategy to disperse hydrophilic particles in non-polar media

NASA Astrophysics Data System (ADS)

Hang, Tian; Chen, Hui-Jiuan; Wang, Ji; Lin, Di-an; Wu, Jiangming; Liu, Di; Cao, Yuhong; Yang, Chengduan; Liu, Chenglin; Xiao, Shuai; Gu, Meilin; Pan, Shuolin; Wu, Mei X.; Xie, Xi

2018-05-01

Dispersion of hydrophilic particles in non-polar media has many important applications yet remains difficult. Surfactant or amphiphilic functionalization was conventionally applied to disperse particles but is highly dependent on the particle/solvent system and may induce unfavorable effects and impact particle hydrophilic nature. Recently 2 μm size polystyrene microbeads coated with ZnO nanospikes have been reported to display anomalous dispersity in phobic media without using surfactant or amphiphilic functionalization. However, due to the lack of understanding whether this phenomenon was applicable to a wider range of conditions, little application has been derived from it. Here the anomalous dispersity phenomenons of hydrophilic microparticles covered with nanospikes were systematically assessed at various conditions including different particle sizes, material compositions, particle morphologies, solvent hydrophobicities, and surface polar groups. Microparticles were functionalized with nanospikes through hydrothermal route, followed by dispersity test in hydrophobic media. The results suggest nanospikes consistently prevent particle aggregation in various particle or solvent conditions, indicating the universal applicability of the anomalous dispersion phenomenons. This work provides insight on the anomalous dispersity of hydrophilic particles in various systems and offers potential application to use this method for surfactant-free dispersions.

Use of Genome Editing Tools to Treat Sickle Cell Disease

PubMed Central

Tasan, Ipek; Jain, Surbhi; Zhao, Huimin

2016-01-01

Recent advances in genome editing techniques have made it possible to modify any desired DNA sequence by employing programmable nucleases. These next generation genome-modifying tools are the ideal candidates for therapeutic applications, especially for the treatment of genetic disorders like sickle cell disease (SCD). SCD is an inheritable monogenic disorder which is caused by a point mutation in the β-globin gene. Substantial success has been achieved in the development of supportive therapeutic strategies for SCD but unfortunately there is still a lack of long-term universal cure. The only existing curative treatment is based on allogeneic stem cell transplantation from healthy donors; however, this treatment is applicable to a limited number of patients only. Hence, a universally applicable therapy is highly desirable. In this review we will discuss the three programmable nucleases that are commonly used for genome editing purposes: zinc finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs) and clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein 9 (CRISPR/Cas9). We will continue by exemplifying uses of these methods to correct the sickle cell mutation. Additionally, we will present induction of fetal globin expression as an alternative approach to cure sickle cell disease. We will conclude by comparing the three methods and explaining the concerns about their use in therapy. PMID:27250347

The Serpent Monte Carlo Code: Status, Development and Applications in 2013

NASA Astrophysics Data System (ADS)

Leppänen, Jaakko; Pusa, Maria; Viitanen, Tuomas; Valtavirta, Ville; Kaltiaisenaho, Toni

2014-06-01

The Serpent Monte Carlo reactor physics burnup calculation code has been developed at VTT Technical Research Centre of Finland since 2004, and is currently used in 100 universities and research organizations around the world. This paper presents the brief history of the project, together with the currently available methods and capabilities and plans for future work. Typical user applications are introduced in the form of a summary review on Serpent-related publications over the past few years.

Enabling Real-time Water Decision Support Services Using Model as a Service

NASA Astrophysics Data System (ADS)

Zhao, T.; Minsker, B. S.; Lee, J. S.; Salas, F. R.; Maidment, D. R.; David, C. H.

2014-12-01

Through application of computational methods and an integrated information system, data and river modeling services can help researchers and decision makers more rapidly understand river conditions under alternative scenarios. To enable this capability, workflows (i.e., analysis and model steps) are created and published as Web services delivered through an internet browser, including model inputs, a published workflow service, and visualized outputs. The RAPID model, which is a river routing model developed at University of Texas Austin for parallel computation of river discharge, has been implemented as a workflow and published as a Web application. This allows non-technical users to remotely execute the model and visualize results as a service through a simple Web interface. The model service and Web application has been prototyped in the San Antonio and Guadalupe River Basin in Texas, with input from university and agency partners. In the future, optimization model workflows will be developed to link with the RAPID model workflow to provide real-time water allocation decision support services.

Layered Manufacturing: Challenges and Opportunities

DTIC Science & Technology

2003-04-01

quality of the surface finish, eliminating residual stress , controlling local composition and microstructure, achieving fine feature size and...applications. Some methods have achieved commercial status, having graduated from the university level, others are in various stages of research. However...Road * Sintering * Co-firing * Shrinkage * Gas dimensions + Powder or + Resin * Residual stress precursors * Layer wire feeding infiltration * Distortion

Consumer Learning for University Students: A Case for a Curriculum

ERIC Educational Resources Information Center

Crafford, Sharon; Bitzer, Eli

2009-01-01

This article indicates how the application of a simplified version of the analytical abstraction method (AAM) was used in curriculum development for consumer learning at one higher education institution in South Africa. We used a case study design and qualitative research methodology to generate data through semi-structured interviews with eight…

Adding Structure to the Transition Process to Advanced Mathematical Activity

ERIC Educational Resources Information Center

Engelbrecht, Johann

2010-01-01

The transition process to advanced mathematical thinking is experienced as traumatic by many students. Experiences that students had of school mathematics differ greatly to what is expected from them at university. Success in school mathematics meant application of different methods to get an answer. Students are not familiar with logical…

Teaching Technoliteracy: Assignments Requiring Microcomputer Applications in Oral Communication Courses.

ERIC Educational Resources Information Center

Reppert, James E.

This paper outlines methods for students in an introductory speech course at Southern Arkansas University to use microcomputers as essential research tools in class assignments. The outline is divided into seven projects, each with two objectives and a list of activities and procedures: (1) speech of introduction; (2) impromptu speech; (3)…

Agile Manifesto for Teaching and Learning

ERIC Educational Resources Information Center

Krehbiel, Timothy C.; Salzarulo, Peter A.; Cosmah, Michelle L.; Forren, John; Gannod, Gerald; Havelka, Douglas; Hulshult, Andrea R.; Merhout, Jeffrey

2017-01-01

A group of faculty members representing six colleges at a public university formed a learning community to study the Agile Way of Working--a method of workplace collaboration widely used in software development--and to determine whether the concepts, practices, and benefits of Agile are applicable to higher education settings. After more than two…

Student's Concept of Infinity in the Context of a Simple Geometrical Construct

ERIC Educational Resources Information Center

Jirotkova, Darina; Littler, Graham

2003-01-01

The research described in this paper was undertaken to determine student-teachers' understanding of infinity in a geometrical context. The methods of analysis of students' responses is presented and these were found to be universally applicable. The findings show that school mathematics does not generally develop the students' ideas of infinity…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Webster, Mort D.

This report presents the final outcomes and products of the project as performed both at the Massachusetts Institute of Technology and subsequently at Pennsylvania State University. The research project can be divided into three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment.

A Test of a Linear Programming Model as an Optimal Solution to the Problem of Combining Methods of Reading Instruction

ERIC Educational Resources Information Center

Mills, James W.; And Others

1973-01-01

The Study reported here tested an application of the Linear Programming Model at the Reading Clinic of Drew University. Results, while not conclusive, indicate that this approach yields greater gains in speed scores than a traditional approach for this population. (Author)

The Reality, Direction, and Future of Computerized Publications

ERIC Educational Resources Information Center

Levenstein, Nicholas

2012-01-01

Sharing information in digital form by using a computer is a growing phenomenon. Many universities are making their applications available on computer. More than one hundred and thirty-six universities have developed computerized applications on their own or through a commercial vendor. Universities developed computerized applications in order to…

76 FR 56157 - Brandeis University, et al.; Notice of Consolidated Decision on Applications for Duty-Free Entry...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-12

... DEPARTMENT OF COMMERCE International Trade Administration Brandeis University, et al.; Notice of Consolidated Decision on Applications for Duty-Free Entry of Electron Microscope This is a decision... Constitution Avenue, NW., Washington, DC. Docket Number: 11-042. Applicant: Brandeis University, Waltham, MA...

77 FR 39997 - University of Connecticut, et al.; Notice of Consolidated Decision on Applications for Duty-Free...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-06

... DEPARTMENT OF COMMERCE International Trade Administration University of Connecticut, et al... Constitution Avenue NW., Washington, DC. Docket Number: 12-022. Applicant: University of Connecticut, Storrs...: See notice at 77 FR 32943, June 4, 2012. Docket Number: 12-023. Applicant: Howard Hughes Medical...

Survey of university programs in remote sensing funded under grants from the NASA University-Space Applications program

NASA Technical Reports Server (NTRS)

Madigan, J. A.; Earhart, R. W.

1978-01-01

NASA's Office of Space and Terrestrial Applications (OSTA) is currently assessing approaches to transferring NASA technology to both the public and private sectors. As part of this assessment, NASA is evaluating the effectiveness of an ongoing program in remote sensing technology transfer conducted by 20 university contractors/grantees, each supported totally or partially by NASA funds. The University-Space Applications program has as its objective the demonstration of practical benefits from the use of remote sensing technology to a broad spectrum of new users, principally in state and local governments. To evaluate the University-Space Applications program, NASA has a near-term requirement for data on each university effort including total funding, funding sources, length of program, program description, and effectiveness measures.

Universal Parameter Measurement and Sensorless Vector Control of Induction and Permanent Magnet Synchronous Motors

NASA Astrophysics Data System (ADS)

Yamamoto, Shu; Ara, Takahiro

Recently, induction motors (IMs) and permanent-magnet synchronous motors (PMSMs) have been used in various industrial drive systems. The features of the hardware device used for controlling the adjustable-speed drive in these motors are almost identical. Despite this, different techniques are generally used for parameter measurement and speed-sensorless control of these motors. If the same technique can be used for parameter measurement and sensorless control, a highly versatile adjustable-speed-drive system can be realized. In this paper, the authors describe a new universal sensorless control technique for both IMs and PMSMs (including salient pole and nonsalient pole machines). A mathematical model applicable for IMs and PMSMs is discussed. Using this model, the authors derive the proposed universal sensorless vector control algorithm on the basis of estimation of the stator flux linkage vector. All the electrical motor parameters are determined by a unified test procedure. The proposed method is implemented on three test machines. The actual driving test results demonstrate the validity of the proposed method.

An Efficient Universal Trajectory Language

NASA Technical Reports Server (NTRS)

Hagen, George E.; Guerreiro, Nelson M.; Maddalon, Jeffrey M.; Butler, Ricky W.

2017-01-01

The Efficient Universal Trajectory Language (EUTL) is a language for specifying and representing trajectories for Air Traffic Management (ATM) concepts such as Trajectory-Based Operations (TBO). In these concepts, the communication of a trajectory between an aircraft and ground automation is fundamental. Historically, this trajectory exchange has not been done, leading to trajectory definitions that have been centered around particular application domains and, therefore, are not well suited for TBO applications. The EUTL trajectory language has been defined in the Prototype Verification System (PVS) formal specification language, which provides an operational semantics for the EUTL language. The hope is that EUTL will provide a foundation for mathematically verified algorithms that manipulate trajectories. Additionally, the EUTL language provides well-defined methods to unambiguously determine position and velocity information between the reported trajectory points. In this paper, we present the EUTL trajectory language in mathematical detail.

An extensible and successful method of identifying collaborators for National Library of Medicine informationist projects.

PubMed

Williams, Jeff D; Rambo, Neil H

2015-07-01

The New York University (NYU) Health Sciences Library used a new method to arrange in-depth discussions with basic science researchers. The objective was to identify collaborators for a new National Library of Medicine administrative supplement. The research took place at the NYU Health Sciences Library. Using the National Institutes of Health (NIH) RePORTER, forty-four researchers were identified and later contacted through individualized emails. Nine researchers responded to the email followed by six in-person or phone discussions. At the conclusion of this process, two researchers submitted applications for supplemental funding, and both of these applications were successful. This method confirmed these users could benefit from the skills and knowledge of health sciences librarians, but they are largely unaware of this.

Astronomical Methods in Aerial Navigation

NASA Technical Reports Server (NTRS)

Beij, K Hilding

1925-01-01

The astronomical method of determining position is universally used in marine navigation and may also be of service in aerial navigation. The practical application of the method, however, must be modified and adapted to conform to the requirements of aviation. Much of this work of adaptation has already been accomplished, but being scattered through various technical journals in a number of languages, is not readily available. This report is for the purpose of collecting under one cover such previous work as appears to be of value to the aerial navigator, comparing instruments and methods, indicating the best practice, and suggesting future developments. The various methods of determining position and their application and value are outlined, and a brief resume of the theory of the astronomical method is given. Observation instruments are described in detail. A complete discussion of the reduction of observations follows, including a rapid method of finding position from the altitudes of two stars. Maps and map cases are briefly considered. A bibliography of the subject is appended.

Evaluation of knee range of motion: Correlation between measurements using a universal goniometer and a smartphone goniometric application.

PubMed

Dos Santos, Rafael Aparecido; Derhon, Viviane; Brandalize, Michelle; Brandalize, Danielle; Rossi, Luciano Pavan

2017-07-01

Goniometers are commonly used to measure range of motion in the musculoskeletal system. Recently smartphone goniometry applications have become available to clinicians. Compare angular measures using a universal goniometer and a smartphone application. Thirty four healthy women with at least 20° of limited range of motion regarding knee extension were recruited. Knee flexion angles of the dominant limb were measured with a universal goniometer and the ROM © goniometric application for the smartphone. Three trained examiners compared the two assessment tools. Strong correlations were found between the measures of the universal goniometer and smartphone application (Pearson's correlation and interclass correlation coefficient > 0.93). The measurements with both devices demonstrated low dispersion and little variation. Measurements obtained using the smartphone goniometric application analyzed are as reliable as those of a universal goniometer. This application is therefore a useful tool for the evaluation of knee range of motion. Copyright © 2016 Elsevier Ltd. All rights reserved.

76 FR 77775 - University of Florida, et al.;

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

... DEPARTMENT OF COMMERCE International Trade Administration University of Florida, et al.; Notice of... Constitution Avenue NW., Washington, DC. Docket Number: 11-065. Applicant: University of Florida, Gainesville...: See notice at 76 FR 70410, November 14, 2011. Docket Number: 11-066. Applicant: University of Florida...

Toward a Set of Internationally Applicable Indicators for Measuring University Internationalization Performance

ERIC Educational Resources Information Center

Gao, Yuan

2015-01-01

This article emphasizes the urgent demand for measurements of university internationalization and proposes a new approach to develop a set of internationally applicable indicators for measuring university internationalization performance. The article looks into existing instruments developed for assessing university internationalization,…

Analysis of Application of 1:3 Ratio in Employments of Academic and Non-Academic Staff in Nigerian Universities

ERIC Educational Resources Information Center

Aghaji Ifedili, Chika Josephine

2006-01-01

The study examined the application of 1:3 in employments of academic and non-academic staff in Nigerian Universities, as recommended by the National Universities Commission (N.U.C.), following the general feeling that Nigerian Universities were highly bureaucratised; non-teaching staff was over employed while some universities lacked…

Semiclassical analysis of spectral singularities and their applications in optics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mostafazadeh, Ali

2011-08-15

Motivated by possible applications of spectral singularities in optics, we develop a semiclassical method of computing spectral singularities. We use this method to examine the spectral singularities of a planar slab gain medium whose gain coefficient varies due to the exponential decay of the intensity of the pumping beam inside the medium. For both singly and doublypumped samples, we obtain universal upper bounds on the decay constant beyond which no lasing occurs. Furthermore, we show that the dependence of the wavelength of the spectral singularities on the value of the decay constant is extremely mild. This is an indication ofmore » the stability of optical spectral singularities.« less

Magnetic Resonance Imaging Criteria for Thrombolysis in Hyperacute Cerebral Infarction

PubMed Central

AHMETGJEKAJ, ILIR; KABASHI-MUÇAJ, SERBEZE; LASCU, LUANA CORINA; KABASHI, ANTIGONA; BONDARI, A.; BONDARI, SIMONA; DEDUSHI-HOTI, KRESHNIKE; BIÇAKU, ARDIAN; SHATRI, JETON

2014-01-01

Purpose: Selection of patients with cerebral infarction for MRI that is suitable for thrombolytic therapy as an emerging application. Although the efficiency of the therapy with i.v. tissue plasminogen activator (tPA) within 3 hours after onset of symptoms has been proven in selected patients with CT, now these criteria are determined by MRI, as the data we gather are fast and accurate in the first hours. Material and methods: MRI screening in patients with acute cerebral infarction before application of thrombolytic therapy was done in a UCC Mannheim in Germany. Unlike trials with CT, MRI studies demonstrated the benefits of therapy up to 6 hours after the onset of symptoms. We studied 21 patients hospitalized in Clinic of Neuroradiology at University Clinical Centre in Mannheim-Germany. They all undergo brain MRI evaluation for stroke. This article reviews literature that has followed application of thrombolysis in patients with cerebral infarction based on MRI. Results: We have analyzed the MRI criteria for i.v. application of tPA at this University Centre. Alongside the personal viewpoints of clinicians, survey reveals a variety of clinical aspects and MRI features that are opened for further more exploration: therapeutic effects, the use of the MRI angiography, dynamics, and other. Conclusions: MRI is a tested imaging method for rapid evaluation of patients with hyperacute cerebral infarction, replacing the use of CT imaging and clinical features. MRI criteria for thrombolytic therapy are being applied in some cerebral vascular centres. In Kosovo, the application of thrombolytic therapy has not started yet. PMID:25729591

Research in Higher Education: Papers Prepared for the First Regional Conference on Higher Education Held under the Joint Auspices of the United States Office of Education and the University of Oregon at Eugene, Oregon, April 14, 15, and 16, 1931. Bulletin, 1931, No. 12

ERIC Educational Resources Information Center

Office of Education, United States Department of the Interior, 1932

1932-01-01

The application of scientific method to the study of college problems in the field of curricula, methods, administration, and student personnel is increasing rapidly. The experimental method--the setting up of alternative procedures in such a way that the factor under study may be isolated for measurement--appeals more to college faculty members…

Development and Application of the p-Version of the Finite Element Method.

DTIC Science & Technology

1987-12-30

element method has been the subject of intensive study since the early 1950’s and perhaps even earlier. Study of the p-version of the finite element...method, on the other hand, began at *Washington University in St. Louis in the early 1970’s and led to a more recent study of the h-p version. Research...infinite strip to a bounded domain. 3.3 A Numerical Argument Principle In order to assure that all roots have indeed been obtained, we have studied the

Universal liquid-phase laser fabrication of various nano-metals encapsulated by ultrathin carbon shells for deep-UV plasmonics.

PubMed

Yu, Miao; Yang, Chao; Li, Xiao-Ming; Lei, Tian-Yu; Sun, Hao-Xuan; Dai, Li-Ping; Gu, Yu; Ning, Xue; Zhou, Ting; Wang, Chao; Zeng, Hai-Bo; Xiong, Jie

2017-06-29

The exploration of localized surface plasmon resonance (LSPR) beyond the usual visible waveband, for example within the ultraviolet (UV) or deep-ultraviolet (D-UV) regions, is of great significance due to its unique applications in secret communications and optics. However, it is still challenging to universally synthesize the corresponding metal nanostructures due to their high activity. Herein, we report a universal, eco-friendly, facile and rapid synthesis of various nano-metals encapsulated by ultrathin carbon shells, significantly with a remarkable deep-UV LSPR characteristic, via a liquid-phase laser fabrication method. Firstly, a new generation of the laser ablation in liquid (LAL) method has been developed with an emphasis on the elaborate selection of solvents to generate ultrathin carbon shells, and hence to stabilize the formed metal nanocrystals. As a result, a series of metal@carbon nanoparticles (NPs), including Cr@C, Ti@C, Fe@C, V@C, Al@C, Sn@C, Mn@C and Pd@C, can be fabricated by this modified LAL method. Interestingly, these NPs exhibit LSPR peaks in the range of 200-330 nm, which are very rare for localized surface plasmon resonance. Consequently, the UV plasmonic effects of these metal@carbon NPs were demonstrated both by the observed enhancement in UV photoluminescence (PL) from the carbon nanoshells and by the improvement of the photo-responsivity of UV GaN photodetectors. This work could provide a universal method for carbon shelled metal NPs and expand plasmonics into the D-UV waveband.

Extending the Universal One-Loop Effective Action: heavy-light coefficients

DOE PAGES

Ellis, Sebastian A. R.; Quevillon, Jérémie; You, Tevong; ...

2017-08-16

The Universal One-Loop Effective Action (UOLEA) is a general expression for the effective action obtained by evaluating in a model-independent way the one-loop expansion of a functional path integral. It can also be used to match UV theories to their low-energy EFTs more efficiently by avoiding redundant steps in the application of functional methods, simplifying the process of obtaining Wilson coefficients of operators up to dimension six. In addition to loops involving only heavy fields, matching may require the inclusion of loops containing both heavy and light particles. Here we use the recently-developed covariant diagram technique to extend the UOLEAmore » to include heavy-light terms which retain the same universal structure as the previously-derived heavy-only terms. As an example of its application, we integrate out a heavy singlet scalar with a linear coupling to a light doublet Higgs. The extension presented here is a first step towards completing the UOLEA to incorporate all possible structures encountered in a covariant derivative expansion of the one-loop path integral.« less

Extending the Universal One-Loop Effective Action: heavy-light coefficients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ellis, Sebastian A. R.; Quevillon, Jérémie; You, Tevong

The Universal One-Loop Effective Action (UOLEA) is a general expression for the effective action obtained by evaluating in a model-independent way the one-loop expansion of a functional path integral. It can also be used to match UV theories to their low-energy EFTs more efficiently by avoiding redundant steps in the application of functional methods, simplifying the process of obtaining Wilson coefficients of operators up to dimension six. In addition to loops involving only heavy fields, matching may require the inclusion of loops containing both heavy and light particles. Here we use the recently-developed covariant diagram technique to extend the UOLEAmore » to include heavy-light terms which retain the same universal structure as the previously-derived heavy-only terms. As an example of its application, we integrate out a heavy singlet scalar with a linear coupling to a light doublet Higgs. The extension presented here is a first step towards completing the UOLEA to incorporate all possible structures encountered in a covariant derivative expansion of the one-loop path integral.« less

Implementation of Consolidated HIS: Improving Quality and Efficiency of Healthcare

PubMed Central

Choi, Jinwook; Seo, Jeong-Wook; Chung, Chun Kee; Kim, Kyung-Hwan; Kim, Ju Han; Kim, Jong Hyo; Chie, Eui Kyu; Cho, Hyun-Jai; Goo, Jin Mo; Lee, Hyuk-Joon; Wee, Won Ryang; Nam, Sang Mo; Lim, Mi-Sun; Kim, Young-Ah; Yang, Seung Hoon; Jo, Eun Mi; Hwang, Min-A; Kim, Wan Suk; Lee, Eun Hye; Choi, Su Hi

2010-01-01

Objectives Adoption of hospital information systems offers distinctive advantages in healthcare delivery. First, implementation of consolidated hospital information system in Seoul National University Hospital led to significant improvements in quality of healthcare and efficiency of hospital management. Methods The hospital information system in Seoul National University Hospital consists of component applications: clinical information systems, clinical research support systems, administrative information systems, management information systems, education support systems, and referral systems that operate to generate utmost performance when delivering healthcare services. Results Clinical information systems, which consist of such applications as electronic medical records, picture archiving and communication systems, primarily support clinical activities. Clinical research support system provides valuable resources supporting various aspects of clinical activities, ranging from management of clinical laboratory tests to establishing care-giving procedures. Conclusions Seoul National University Hospital strives to move its hospital information system to a whole new level, which enables customized healthcare service and fulfills individual requirements. The current information strategy is being formulated as an initial step of development, promoting the establishment of next-generation hospital information system. PMID:21818449

The multiple mini-interview for selecting medical residents: first experience in the Middle East region.

PubMed

Ahmed, Ashraf; Qayed, Khalil Ibrahim; Abdulrahman, Mahera; Tavares, Walter; Rosenfeld, Jack

2014-08-01

Numerous studies have shown that multiple mini-interviews (MMI) provides a standard, fair, and more reliable method for assessing applicants. This article presents the first MMI experience for selection of medical residents in the Middle East culture and an Arab country. In 2012, we started using the MMI in interviewing applicants to the residency program of Dubai Health Authority. This interview process consisted of eight, eight-minute structured interview scenarios. Applicants rotated through the stations, each with its own interviewer and scenario. They read the scenario and were requested to discuss the issues with the interviewers. Sociodemographic and station assessment data provided for each applicant were analyzed to determine whether the MMI was a reliable assessment of the non-clinical attributes in the present setting of an Arab country. One hundred and eighty-seven candidates from 27 different countries were interviewed for Dubai Residency Training Program using MMI. They were graduates of 5 medical universities within United Arab Emirates (UAE) and 60 different universities outside UAE. With this applicant's pool, a MMI with eight stations, produced absolute and relative reliability of 0.8 and 0.81, respectively. The person × station interaction contributed 63% of the variance components, the person contributed 34% of the variance components, and the station contributed 2% of the variance components. The MMI has been used in numerous universities in English speaking countries. The MMI evaluates non-clinical attributes and this study provides further evidence for its reliability but in a different country and culture. The MMI offers a fair and more reliable assessment of applicants to medical residency programs. The present data show that this assessment technique applied in a non-western country and Arab culture still produced reliable results.

Influence of Application Time and Etching Mode of Universal Adhesives on Enamel Adhesion.

PubMed

Sai, Keiichi; Takamizawa, Toshiki; Imai, Arisa; Tsujimoto, Akimasa; Ishii, Ryo; Barkmeier, Wayne W; Latta, Mark A; Miyazaki, Masashi

2018-01-01

To investigate the influence of application time and etching mode of universal adhesives on enamel adhesion. Five universal adhesives, Adhese Universal, Bondmer Lightless, Clearfil Universal Bond Quick, G-Premio Bond, and Scotchbond Universal, were used. Bovine incisors were prepared and divided into four groups of ten teeth each. SBS, Ra, and SFE were determined after the following procedures: 1. self-etch mode with immediate air blowing after application (IA); 2. self-etch mode with prolonged application time (PA); 3. etch-and-rinse mode with IA; 4. etch-and-rinse mode with PA. After 24-h water storage, the bonded assemblies were subjected to shear bond strength (SBS) tests. For surface roughness (Ra) and surface free energy (SFE) measurements, the adhesives were simply applied to the enamel and rinsed with acetone and water before the measurements were carried out. Significantly higher SBS and Ra values were obtained with etch-and-rinse mode than with self-etch mode regardless of the application time or type of adhesive. Although most adhesives showed decreased SFE values with increased application time in self-etch mode, SFE values in etch-and-rinse mode were dependent on the adhesive type and application time. Etching mode, application time, and type of adhesive significantly influenced the SBS, Ra, and SFE values.

Using three-dimensional imaging to assess treatment outcomes in orthodontics: a progress report from the University of the Pacific.

PubMed

Baumrind, S; Carlson, S; Beers, A; Curry, S; Norris, K; Boyd, R L

2003-01-01

Past research in integrated three-dimensional (3D) craniofacial mapping at the Craniofacial Research Instrumentation Laboratory (CRIL) of the University of the Pacific is summarized in narrative form. The advantages and limitations of recent commercial developments in the application of cone beam geometry volumetric X-ray scanners in dentistry and surface digital mapping of study casts are discussed. The rationale for methods currently in development at CRIL for merging longitudinal information from existing 3D study casts and two-dimensional lateral X-ray cephalograms in studies of orthodontic treatment outcome is presented.

Inter-comparison of boron concentration measurements at INFN-University of Pavia (Italy) and CNEA (Argentina).

PubMed

Portu, Agustina; Postuma, Ian; Gadan, Mario Alberto; Saint Martin, Gisela; Olivera, María Silvina; Altieri, Saverio; Protti, Nicoletta; Bortolussi, Silva

2015-11-01

An inter-comparison of three boron determination techniques was carried out between laboratories from INFN-University of Pavia (Italy) and CNEA (Argentina): alpha spectrometry (alpha-spect), neutron capture radiography (NCR) and quantitative autoradiography (QTA). Samples of different nature were analysed: liquid standards, liver homogenates and tissue samples from different treatment protocols. The techniques showed a good agreement in a concentration range of interest in BNCT (1-100ppm), thus demonstrating their applicability as precise methods to quantify boron and determine its distribution in tissues. Copyright © 2015 Elsevier Ltd. All rights reserved.

GenomeFingerprinter: the genome fingerprint and the universal genome fingerprint analysis for systematic comparative genomics.

PubMed

Ai, Yuncan; Ai, Hannan; Meng, Fanmei; Zhao, Lei

2013-01-01

No attention has been paid on comparing a set of genome sequences crossing genetic components and biological categories with far divergence over large size range. We define it as the systematic comparative genomics and aim to develop the methodology. First, we create a method, GenomeFingerprinter, to unambiguously produce a set of three-dimensional coordinates from a sequence, followed by one three-dimensional plot and six two-dimensional trajectory projections, to illustrate the genome fingerprint of a given genome sequence. Second, we develop a set of concepts and tools, and thereby establish a method called the universal genome fingerprint analysis (UGFA). Particularly, we define the total genetic component configuration (TGCC) (including chromosome, plasmid, and phage) for describing a strain as a systematic unit, the universal genome fingerprint map (UGFM) of TGCC for differentiating strains as a universal system, and the systematic comparative genomics (SCG) for comparing a set of genomes crossing genetic components and biological categories. Third, we construct a method of quantitative analysis to compare two genomes by using the outcome dataset of genome fingerprint analysis. Specifically, we define the geometric center and its geometric mean for a given genome fingerprint map, followed by the Euclidean distance, the differentiate rate, and the weighted differentiate rate to quantitatively describe the difference between two genomes of comparison. Moreover, we demonstrate the applications through case studies on various genome sequences, giving tremendous insights into the critical issues in microbial genomics and taxonomy. We have created a method, GenomeFingerprinter, for rapidly computing, geometrically visualizing, intuitively comparing a set of genomes at genome fingerprint level, and hence established a method called the universal genome fingerprint analysis, as well as developed a method of quantitative analysis of the outcome dataset. These have set up the methodology of systematic comparative genomics based on the genome fingerprint analysis.

A Bayesian blind survey for cold molecular gas in the Universe

NASA Astrophysics Data System (ADS)

Lentati, L.; Carilli, C.; Alexander, P.; Walter, F.; Decarli, R.

2014-10-01

A new Bayesian method for performing an image domain search for line-emitting galaxies is presented. The method uses both spatial and spectral information to robustly determine the source properties, employing either simple Gaussian, or other physically motivated models whilst using the evidence to determine the probability that the source is real. In this paper, we describe the method, and its application to both a simulated data set, and a blind survey for cold molecular gas using observations of the Hubble Deep Field-North taken with the Plateau de Bure Interferometer. We make a total of six robust detections in the survey, five of which have counterparts in other observing bands. We identify the most secure detections found in a previous investigation, while finding one new probable line source with an optical ID not seen in the previous analysis. This study acts as a pilot application of Bayesian statistics to future searches to be carried out both for low-J CO transitions of high-redshift galaxies using the Jansky Very Large Array (JVLA), and at millimetre wavelengths with Atacama Large Millimeter/submillimeter Array (ALMA), enabling the inference of robust scientific conclusions about the history of the molecular gas properties of star-forming galaxies in the Universe through cosmic time.

A novel single neuron perceptron with universal approximation and XOR computation properties.

PubMed

Lotfi, Ehsan; Akbarzadeh-T, M-R

2014-01-01

We propose a biologically motivated brain-inspired single neuron perceptron (SNP) with universal approximation and XOR computation properties. This computational model extends the input pattern and is based on the excitatory and inhibitory learning rules inspired from neural connections in the human brain's nervous system. The resulting architecture of SNP can be trained by supervised excitatory and inhibitory online learning rules. The main features of proposed single layer perceptron are universal approximation property and low computational complexity. The method is tested on 6 UCI (University of California, Irvine) pattern recognition and classification datasets. Various comparisons with multilayer perceptron (MLP) with gradient decent backpropagation (GDBP) learning algorithm indicate the superiority of the approach in terms of higher accuracy, lower time, and spatial complexity, as well as faster training. Hence, we believe the proposed approach can be generally applicable to various problems such as in pattern recognition and classification.

The Practicality of Cooperative Education between an Industry and University

NASA Astrophysics Data System (ADS)

Oomichi, Takeo; Jianming, Yang; Matsubara, Takenori; Tatsuno, Kyoichi; Takahashi, Tomoichi

Some cooperative methods have been proposed and executed as the R&D (research and development) between universities and industries meld together to form a new hybeid business. This paper proposes the ides of “Fusion Education” for the advancement of education and for fostering new business. In fusion education, university students will begin by mainly verifying the application potential of a developed system such as modulated robotic software, for example, and improve specific areas when and if needed. Then, the university will rank the systems according to its reliability or safety record (based on the student) complete verification test which includes data on when the robot will be operated and under what varying conditions (such as performance in various private houses). The university essentially gives students the chance to find a solution to practical problems while the industry gets a reliable (fully authorized) system as result of this education process. The concept and feasibility of this “fusion education” will now be discussed.

Teaching Structure from Motion to Undergraduates: New Learning Module for Field Geoscience Courses

NASA Astrophysics Data System (ADS)

Pratt-Sitaula, B. A.; Shervais, K.; Crosby, C. J.; Douglas, B. J.; Crosby, B. T.; Charlevoix, D. J.

2016-12-01

With photogrammetry use expanding rapidly, it is essential to integrate these methods into undergraduate geosciences courses. The NSF-funded "GEodetic Tools for Societal Issues" (GETSI) project has recently published a module for field geoscience courses called "Analyzing High Resolution Topography with TLS and SfM" (serc.carleton.edu/getsi/teaching_materials/high-rez-topo/index.html). Structure from motion (SfM) and terrestrial laser scanning (TLS) are two valuable methods for generating high-resolution topographic landscape models. In addition to teaching the basic surveying methods, the module includes several specific applications that are tied to societally important geoscience research questions. The module goals are that students will be able to: 1) design and conduct a complex TLS and/or SfM survey to address a geologic research question; 2) articulate the societal impetus for answering a given research question; and 3) justify why TLS and/or SfM is the appropriate method in some circumstances. The module includes 6 units: Unit 1-TLS Introduction, Unit 1-SfM Introduction, Unit 2 Stratigraphic Section Survey, Unit 3 Fault Scarp Survey, Unit 4 Geomorphic Change Detection Survey, and Unit 5 Summative Assessment. One or both survey methods can be taught. Instructors choose which application/s to use from Units 2-4. Unit 5 Summative Assessment is flexibly written and can be used to assess any of the learned applications or others such as dinosaur tracks or seismic trench photomosaics. Prepared data sets are also provided for courses unable to visit the field. The included SfM learning manuals may also be of interest to researchers seeking to start with SfM; these are "SfM Guide of Instructors and Investigators" and "SfM Data Exploration and Processing Manual (Agisoft)". The module is appropriate for geoscience courses with field components such as field methods, geomorphology, geophysics, tectonics, and structural geology. All GETSI modules are designed and developed by teams of faculty and content experts and undergo rigorous review and classroom testing. GETSI is a collaborative project by UNAVCO (which runs NSF's Geodetic Facility), Indiana University, and Idaho State University. The Science Education Resource Center (SERC) provides assessment and evaluation expertise and webhosting.

Kentucky DOE EPSCoR Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grulke, Eric; Stencel, John

2011-09-13

The KY DOE EPSCoR Program supports two research clusters. The Materials Cluster uses unique equipment and computational methods that involve research expertise at the University of Kentucky and University of Louisville. This team determines the physical, chemical and mechanical properties of nanostructured materials and examines the dominant mechanisms involved in the formation of new self-assembled nanostructures. State-of-the-art parallel computational methods and algorithms are used to overcome current limitations of processing that otherwise are restricted to small system sizes and short times. The team also focuses on developing and applying advanced microtechnology fabrication techniques and the application of microelectrornechanical systems (MEMS)more » for creating new materials, novel microdevices, and integrated microsensors. The second research cluster concentrates on High Energy and Nuclear Physics. lt connects research and educational activities at the University of Kentucky, Eastern Kentucky University and national DOE research laboratories. Its vision is to establish world-class research status dedicated to experimental and theoretical investigations in strong interaction physics. The research provides a forum, facilities, and support for scientists to interact and collaborate in subatomic physics research. The program enables increased student involvement in fundamental physics research through the establishment of graduate fellowships and collaborative work.« less

Efficient universal quantum channel simulation in IBM's cloud quantum computer

NASA Astrophysics Data System (ADS)

Wei, Shi-Jie; Xin, Tao; Long, Gui-Lu

2018-07-01

The study of quantum channels is an important field and promises a wide range of applications, because any physical process can be represented as a quantum channel that transforms an initial state into a final state. Inspired by the method of performing non-unitary operators by the linear combination of unitary operations, we proposed a quantum algorithm for the simulation of the universal single-qubit channel, described by a convex combination of "quasi-extreme" channels corresponding to four Kraus operators, and is scalable to arbitrary higher dimension. We demonstrated the whole algorithm experimentally using the universal IBM cloud-based quantum computer and studied the properties of different qubit quantum channels. We illustrated the quantum capacity of the general qubit quantum channels, which quantifies the amount of quantum information that can be protected. The behavior of quantum capacity in different channels revealed which types of noise processes can support information transmission, and which types are too destructive to protect information. There was a general agreement between the theoretical predictions and the experiments, which strongly supports our method. By realizing the arbitrary qubit channel, this work provides a universally- accepted way to explore various properties of quantum channels and novel prospect for quantum communication.

Shape-programmable magnetic soft matter

PubMed Central

Lum, Guo Zhan; Ye, Zhou; Dong, Xiaoguang; Marvi, Hamid; Erin, Onder; Hu, Wenqi; Sitti, Metin

2016-01-01

Shape-programmable matter is a class of active materials whose geometry can be controlled to potentially achieve mechanical functionalities beyond those of traditional machines. Among these materials, magnetically actuated matter is particularly promising for achieving complex time-varying shapes at small scale (overall dimensions smaller than 1 cm). However, previous work can only program these materials for limited applications, as they rely solely on human intuition to approximate the required magnetization profile and actuating magnetic fields for their materials. Here, we propose a universal programming methodology that can automatically generate the required magnetization profile and actuating fields for soft matter to achieve new time-varying shapes. The universality of the proposed method can therefore inspire a vast number of miniature soft devices that are critical in robotics, smart engineering surfaces and materials, and biomedical devices. Our proposed method includes theoretical formulations, computational strategies, and fabrication procedures for programming magnetic soft matter. The presented theory and computational method are universal for programming 2D or 3D time-varying shapes, whereas the fabrication technique is generic only for creating planar beams. Based on the proposed programming method, we created a jellyfish-like robot, a spermatozoid-like undulating swimmer, and an artificial cilium that could mimic the complex beating patterns of its biological counterpart. PMID:27671658

Shape-programmable magnetic soft matter.

PubMed

Lum, Guo Zhan; Ye, Zhou; Dong, Xiaoguang; Marvi, Hamid; Erin, Onder; Hu, Wenqi; Sitti, Metin

2016-10-11

Shape-programmable matter is a class of active materials whose geometry can be controlled to potentially achieve mechanical functionalities beyond those of traditional machines. Among these materials, magnetically actuated matter is particularly promising for achieving complex time-varying shapes at small scale (overall dimensions smaller than 1 cm). However, previous work can only program these materials for limited applications, as they rely solely on human intuition to approximate the required magnetization profile and actuating magnetic fields for their materials. Here, we propose a universal programming methodology that can automatically generate the required magnetization profile and actuating fields for soft matter to achieve new time-varying shapes. The universality of the proposed method can therefore inspire a vast number of miniature soft devices that are critical in robotics, smart engineering surfaces and materials, and biomedical devices. Our proposed method includes theoretical formulations, computational strategies, and fabrication procedures for programming magnetic soft matter. The presented theory and computational method are universal for programming 2D or 3D time-varying shapes, whereas the fabrication technique is generic only for creating planar beams. Based on the proposed programming method, we created a jellyfish-like robot, a spermatozoid-like undulating swimmer, and an artificial cilium that could mimic the complex beating patterns of its biological counterpart.

Shape-programmable magnetic soft matter

NASA Astrophysics Data System (ADS)

Zhan Lum, Guo; Ye, Zhou; Dong, Xiaoguang; Marvi, Hamid; Erin, Onder; Hu, Wenqi; Sitti, Metin

2016-10-01

Shape-programmable matter is a class of active materials whose geometry can be controlled to potentially achieve mechanical functionalities beyond those of traditional machines. Among these materials, magnetically actuated matter is particularly promising for achieving complex time-varying shapes at small scale (overall dimensions smaller than 1 cm). However, previous work can only program these materials for limited applications, as they rely solely on human intuition to approximate the required magnetization profile and actuating magnetic fields for their materials. Here, we propose a universal programming methodology that can automatically generate the required magnetization profile and actuating fields for soft matter to achieve new time-varying shapes. The universality of the proposed method can therefore inspire a vast number of miniature soft devices that are critical in robotics, smart engineering surfaces and materials, and biomedical devices. Our proposed method includes theoretical formulations, computational strategies, and fabrication procedures for programming magnetic soft matter. The presented theory and computational method are universal for programming 2D or 3D time-varying shapes, whereas the fabrication technique is generic only for creating planar beams. Based on the proposed programming method, we created a jellyfish-like robot, a spermatozoid-like undulating swimmer, and an artificial cilium that could mimic the complex beating patterns of its biological counterpart.

Principles and Applications of Ultrasonic-Based Nondestructive Methods for Self-Healing in Cementitious Materials

PubMed Central

Ahn, Eunjong; Kim, Hyunjun; Sim, Sung-Han; Shin, Sung Woo; Shin, Myoungsu

2017-01-01

Recently, self-healing technologies have emerged as a promising approach to extend the service life of social infrastructure in the field of concrete construction. However, current evaluations of the self-healing technologies developed for cementitious materials are mostly limited to lab-scale experiments to inspect changes in surface crack width (by optical microscopy) and permeability. Furthermore, there is a universal lack of unified test methods to assess the effectiveness of self-healing technologies. Particularly, with respect to the self-healing of concrete applied in actual construction, nondestructive test methods are required to avoid interrupting the use of the structures under evaluation. This paper presents a review of all existing research on the principles of ultrasonic test methods and case studies pertaining to self-healing concrete. The main objective of the study is to examine the applicability and limitation of various ultrasonic test methods in assessing the self-healing performance. Finally, future directions on the development of reliable assessment methods for self-healing cementitious materials are suggested. PMID:28772640

SERVQUAL Application and Adaptation for Educational Service Quality Assessments in Russian Higher Education

ERIC Educational Resources Information Center

Galeeva, Railya B.

2016-01-01

Purpose: The purpose of this study is to demonstrate an adaptation of the SERVQUAL survey method for measuring the quality of higher educational services in a Russian university context. We use a new analysis and a graphical technique for presentation of results. Design/methodology/approach: The methodology of this research follows the classic…

Development of Instrumental Techniques for Color Assessment of Camouflage Patterns

ERIC Educational Resources Information Center

Fang, Gang

2012-01-01

Camouflage fabrics are produced on a large scale for use in the US military and other applications. One of the highest volume camouflage fabrics is known as the Universal Camouflage Pattern (UCP) which is produced for the US Department of Defense. At present, no standard measurement-based color quality control method exists for camouflage…

Problem-Based Composition: The Practical Side

ERIC Educational Resources Information Center

Beckelhimer, Lisa; Hundemer, Ronald; Sharp, Judith; Zipfel, William

2007-01-01

For several years a number of instructors at the University of Cincinnati have experimented with the concept of problem-based learning (PBL) in their composition courses. The concept, rooted as it is in Socratic method and the hands-on problem-solving advocated by John Dewey, is not new, and though some of its applications may call for adjustments…

Development of a Vocabulary Building Program for Vocational Education Students.

ERIC Educational Resources Information Center

James, Bobby M.

In view of the fact that vocational education students want only the essentials of the reading curriculum, the reading center at Eastern New Mexico University (Roswell) began a program of direct vocabulary building. This method stresses application of words to be learned, making them function for the learner, as well as a high interest factor.…

Educacion y Ciencias Sociales en el Mundo Moderno. [Education and the Social Sciences in the Modern World].

ERIC Educational Resources Information Center

Rimoldi, Horacio J. A.

The document, written in Spanish, discusses the relationship between research in the social sciences and the role of the university in social science education. The author considers the education of researchers, the application of research, the need for interdisciplinary research methods, and problems involved in cross-cultural studies. He states…

Multimedia Enhanced Course Management System: Web Based Interactive Application Development for Universities

ERIC Educational Resources Information Center

Emiroglu, Bulent Gursel

2007-01-01

Of the fields on which developments related to information and communication technologies are effective will keep increasing is education. That's why the methods and techniques that have been formed over the long years may change relatively. In the past years, the field of higher education has been impacted very much from the developments and…

Knowledge Management & Its Applications in Distance Education

ERIC Educational Resources Information Center

Saxena, Anurag

2007-01-01

It is the digital economy age in which we are living presently. Thus, traditional thinking is proving futile and newer methods are substituting the older ones. If one has to achieve developmental goals, one has to build a knowledge repository. Success of any system today is defined by its knowledge capital. For example for a university, knowledge…

RSE-40: An Alternate Scoring System for the Rosenberg Self-Esteem Scale (RSE).

ERIC Educational Resources Information Center

Wallace, Gaylen R.

The Rosenberg Self-Esteem Inventory (RSE) is a 10-item scale purporting to measure self-esteem using self-acceptance and self-worth statements. This analysis covers concerns about the degree to which the RSE items represent a particular content universe, the RSE's applicability, factor analytic methods used, and the RSE's reliability and validity.…

How Does One Assess the Accuracy of Academic Success Predictors? ROC Analysis Applied to University Entrance Factors

ERIC Educational Resources Information Center

Vivo, Juana-Maria; Franco, Manuel

2008-01-01

This article attempts to present a novel application of a method of measuring accuracy for academic success predictors that could be used as a standard. This procedure is known as the receiver operating characteristic (ROC) curve, which comes from statistical decision techniques. The statistical prediction techniques provide predictor models and…

Methods for Addressing Missing Data with Applications from ACS Exams

ERIC Educational Resources Information Center

Brandriet, Alexandra; Holme, Thomas

2015-01-01

As part of the ACS Examinations Institute (ACS-EI) national norming process, student performance data sets are collected from professors at colleges and universities from around the United States. Because the data sets are collected on a volunteer basis, the ACS-EI often receives data sets with only students' total scores and without the students'…

The College, The Community and Conservation. Report of a Conference (Washington, D.C., May 22-23, 1967).

ERIC Educational Resources Information Center

Conservation Foundation, Washington, DC.

A conference on conservation education brought together leaders in college and university sponsored continuing education, professionals in conservation, planning, and design, and representatives of public and private organizations; discussion centered on the acceleration of application of now-known and feasible methods to the management of land,…

A Construal of the Understanding Level of Quality Assurance by Internal Stakeholders in Two Malaysian Universities

ERIC Educational Resources Information Center

Njie, Baboucarr; Asimiran, Soaib

2016-01-01

The "understanding" in terms of interpretation of quality assurance is essential for the acceptance, theorizing and the practical application of the methods proposed by it. A great deal of research papers have often pointed to the lack of understanding, among others, as the reason behind the inadequate nature of implementing quality…

Screening Systems and Decision Making at the Preschool Level: Application of a Comprehensive Validity Framework

ERIC Educational Resources Information Center

Kettler, Ryan J.; Feeney-Kettler, Kelly A.

2011-01-01

Universal screening is designed to be an efficient method for identifying preschool students with mental health problems, but prior to use, screening systems must be evaluated to determine their appropriateness within a specific setting. In this article, an evidence-based validity framework is applied to four screening systems for identifying…

Workshop Report: Distributive Education Project Development Workshop (Rutgers University, New Brunswick, June 19-30, 1967).

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. School of Education.

This report of a 2-week workshop contains 12 papers presented by their authors, four business presentations, and 12 group and 25 individual projects. The papers pertain to the application of the project method, objectives and use of projects, and preparing culturally deprived students. The business presentations relate to advertising, credit,…

Assessment and Continuous Quality Improvement: A North American Case Study.

ERIC Educational Resources Information Center

Tait, Jo; Knight, Peter

1995-01-01

Examines a five-stage assessment model used at James Madison University (Virginia) to assess student learning and to guide policy. Includes identification of program objectives, selection or design of methods that measure those outcomes, analysis of assessment data, application of data for decision making, and use of data to bid for state funding.…

Publications of the Exobiology Program for 1985: A special bibliography

NASA Technical Reports Server (NTRS)

1987-01-01

The Exobiology Program, within the Office of Space Science and Applications of the National Aeronautics and Space Administration, is an integrated program to methodically investigate those processes that are responsible for, or related to, the origin, evolution, and distribution of life in the universe. The list of l985 publications resulting from research pursued is contained.

78 FR 31973 - Endangered and Threatened Species Permit Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... permit for research and recovery purposes to conduct presence/absence surveys of Sonora tiger salamander... Applicant: University of New Mexico, Albuquerque, New Mexico. Applicant requests a renewal to a current... Mexico. Permit TE-038055 Applicant: K-9 University, LLC, Oklahoma City, Oklahoma. Applicant requests a...

Physics Teaching and Learning Methods: Comparison between the Developed and Developing Country Approach

NASA Astrophysics Data System (ADS)

Deb, Pradip

2010-07-01

As a fundamental basis of all natural science and technology, Physics is the key subject in many science teaching institutions around the world. Physics teaching and learning is the most important issue today—because of its complexity and fast growing applications in many new fields. The laws of Physics are global—but teaching and learning methods of Physics are very different among countries and cultures. When I first came in Australia for higher education about 11 years ago with an undergraduate and a graduate degree in Physics from a university of Bangladesh, I found the Physics education system in Australia is very different to what I have experienced in Bangladesh. After having two graduate degrees from two Australian universities and gaining few years experience in Physics teaching in Australian universities, I compare the two different types of Physics education experiences in this paper and tried to find the answer of the question—does it all depend on the resources or internal culture of the society or both. Undergraduate and graduate level Physics syllabi, resources and teaching methods, examination and assessment systems, teacher-student relationships, and research cultures are discussed and compared with those in Australia.

A universal TaqMan-based RT-PCR protocol for cost-efficient detection of small noncoding RNA.

PubMed

Jung, Ulrike; Jiang, Xiaoou; Kaufmann, Stefan H E; Patzel, Volker

2013-12-01

Several methods for the detection of RNA have been developed over time. For small RNA detection, a stem-loop reverse primer-based protocol relying on TaqMan RT-PCR has been described. This protocol requires an individual specific TaqMan probe for each target RNA and, hence, is highly cost-intensive for experiments with small sample sizes or large numbers of different samples. We describe a universal TaqMan-based probe protocol which can be used to detect any target sequence and demonstrate its applicability for the detection of endogenous as well as artificial eukaryotic and bacterial small RNAs. While the specific and the universal probe-based protocol showed the same sensitivity, the absolute sensitivity of detection was found to be more than 100-fold lower for both than previously reported. In subsequent experiments, we found previously unknown limitations intrinsic to the method affecting its feasibility in determination of mature template RISC incorporation as well as in multiplexing. Both protocols were equally specific in discriminating between correct and incorrect small RNA targets or between mature miRNA and its unprocessed RNA precursor, indicating the stem-loop RT-primer, but not the TaqMan probe, triggers target specificity. The presented universal TaqMan-based RT-PCR protocol represents a cost-efficient method for the detection of small RNAs.

Applications of Support Vector Machines In Chemo And Bioinformatics

NASA Astrophysics Data System (ADS)

Jayaraman, V. K.; Sundararajan, V.

2010-10-01

Conventional linear & nonlinear tools for classification, regression & data driven modeling are being replaced on a rapid scale by newer techniques & tools based on artificial intelligence and machine learning. While the linear techniques are not applicable for inherently nonlinear problems, newer methods serve as attractive alternatives for solving real life problems. Support Vector Machine (SVM) classifiers are a set of universal feed-forward network based classification algorithms that have been formulated from statistical learning theory and structural risk minimization principle. SVM regression closely follows the classification methodology. In this work recent applications of SVM in Chemo & Bioinformatics will be described with suitable illustrative examples.

Methods for artifact detection and removal from scalp EEG: A review.

PubMed

Islam, Md Kafiul; Rastegarnia, Amir; Yang, Zhi

2016-11-01

Electroencephalography (EEG) is the most popular brain activity recording technique used in wide range of applications. One of the commonly faced problems in EEG recordings is the presence of artifacts that come from sources other than brain and contaminate the acquired signals significantly. Therefore, much research over the past 15 years has focused on identifying ways for handling such artifacts in the preprocessing stage. However, this is still an active area of research as no single existing artifact detection/removal method is complete or universal. This article presents an extensive review of the existing state-of-the-art artifact detection and removal methods from scalp EEG for all potential EEG-based applications and analyses the pros and cons of each method. First, a general overview of the different artifact types that are found in scalp EEG and their effect on particular applications are presented. In addition, the methods are compared based on their ability to remove certain types of artifacts and their suitability in relevant applications (only functional comparison is provided not performance evaluation of methods). Finally, the future direction and expected challenges of current research is discussed. Therefore, this review is expected to be helpful for interested researchers who will develop and/or apply artifact handling algorithm/technique in future for their applications as well as for those willing to improve the existing algorithms or propose a new solution in this particular area of research. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Application of EOF/PCA-based methods in the post-processing of GRACE derived water variations

NASA Astrophysics Data System (ADS)

Forootan, Ehsan; Kusche, Jürgen

2010-05-01

Two problems that users of monthly GRACE gravity field solutions face are 1) the presence of correlated noise in the Stokes coefficients that increases with harmonic degree and causes ‘striping', and 2) the fact that different physical signals are overlaid and difficult to separate from each other in the data. These problems are termed the signal-noise separation problem and the signal-signal separation problem. Methods that are based on principal component analysis and empirical orthogonal functions (PCA/EOF) have been frequently proposed to deal with these problems for GRACE. However, different strategies have been applied to different (spatial: global/regional, spectral: global/order-wise, geoid/equivalent water height) representations of the GRACE level 2 data products, leading to differing results and a general feeling that PCA/EOF-based methods are to be applied ‘with care'. In addition, it is known that conventional EOF/PCA methods force separated modes to be orthogonal, and that, on the other hand, to either EOFs or PCs an arbitrary orthogonal rotation can be applied. The aim of this paper is to provide a common theoretical framework and to study the application of PCA/EOF-based methods as a signal separation tool due to post-process GRACE data products. In order to investigate and illustrate the applicability of PCA/EOF-based methods, we have employed them on GRACE level 2 monthly solutions based on the Center for Space Research, University of Texas (CSR/UT) RL04 products and on the ITG-GRACE03 solutions from the University of Bonn, and on various representations of them. Our results show that EOF modes do reveal the dominating annual, semiannual and also long-periodic signals in the global water storage variations, but they also show how choosing different strategies changes the outcome and may lead to unexpected results.

Implementation of an Enterprise Information Portal (EIP) in the Loyola University Health System

PubMed Central

Price, Ronald N.; Hernandez, Kim

2001-01-01

Loyola University Chicago Stritch School of Medicine and Loyola University Medical Center have long histories in the development of applications to support the institutions' missions of education, research and clinical care. In late 1998, the institutions' application development group undertook an ambitious program to re-architecture more than 10 years of legacy application development (30+ core applications) into a unified World Wide Web (WWW) environment. The primary project objectives were to construct an environment that would support the rapid development of n-tier, web-based applications while providing standard methods for user authentication/validation, security/access control and definition of a user's organizational context. The project's efforts resulted in Loyola's Enterprise Information Portal (EIP), which meets the aforementioned objectives. This environment: 1) allows access to other vertical Intranet portals (e.g., electronic medical record, patient satisfaction information and faculty effort); 2) supports end-user desktop customization; and 3) provides a means for standardized application “look and feel.” The portal was constructed utilizing readily available hardware and software. Server hardware consists of multiprocessor (Intel Pentium 500Mhz) Compaq 6500 servers with one gigabyte of random access memory and 75 gigabytes of hard disk storage. Microsoft SQL Server was selected to house the portal's internal or security data structures. Netscape Enterprise Server was selected for the web server component of the environment and Allaire's ColdFusion was chosen for access and application tiers. Total costs for the portal environment was less than $40,000. User data storage is accomplished through two Microsoft SQL Servers and an existing SUN Microsystems enterprise server with eight processors, 750 gigabytes of disk storage operating Sybase relational database manager. Total storage capacity for all system exceeds one terabyte. In the past 12 months, the EIP has supported development of more than 88 applications and is utilized by more than 2,200 users.

Exploring the Utility and Application of Framing Devices in College/University President Speeches

ERIC Educational Resources Information Center

Young, Ira George

2013-01-01

The purpose of this study was to explore the utility and application of the framing devices identified by Fairhurst (1993) and Fairhurst and Sarr (1996) in the college/university setting as evidenced through college/university presidents' speeches. Fifty-seven college/university presidents' speeches were collected from institution…

Mathematical methods in systems biology.

PubMed

Kashdan, Eugene; Duncan, Dominique; Parnell, Andrew; Schattler, Heinz

2016-12-01

The editors of this Special Issue of Mathematical Biosciences and Engineering were the organizers for the Third International Workshop "Mathematical Methods in System Biology" that took place on June 15-18, 2015 at the University College Dublin in Ireland. As stated in the workshop goals, we managed to attract a good mix of mathematicians and statisticians working on biological and medical applications with biologists and clinicians interested in presenting their challenging problems and looking to find mathematical and statistical tools for their solutions.

Integrated approaches to academic anaesthesia - the Cambridge experience.

PubMed

Menon, D K; Wheeler, D W; Wilkins, I A; Phillips, P D; Fletcher, S J; Penfold, N W; Smith, H L; Gupta, A K; Matta, B F

2004-08-01

There is mounting concern about the pressures experienced by University Departments of Anaesthesia, which, if lost, could threaten undergraduate peri-operative medicine teaching, development of critical appraisal skills among anaesthetists, and the future of coherent research programs. We have addressed these problems by establishing a foundation course in scientific methods and research techniques (the Cambridge SMART Course), complemented by competitive, fully funded, 12-month academic trainee attachments. Research conducted during academic attachments has been published and used to underpin substantive grant applications allowing work towards higher degrees. Following the attachment, a flexible scheme ensures safe reintroduction to clinical training. Research at consultant level is facilitated by encouraging applications for Clinician Scientist Fellowships, and by ensuring that the University Department champions, legitimises and validates the allocation of research time within the new consultant contract. We believe that these are important steps in safeguarding research and teaching in anaesthesia, critical care and peri-operative medicine.

Applications of Materials Selection For Joining Composite/Alloy Piping Systems

NASA Technical Reports Server (NTRS)

Crosby, Karen E.; Smith, Brett H.; Mensah, Patrick F.; Stubblefield, Michael A.

2001-01-01

A study in collaboration between investigators at Southern University and Louisiana State University in Baton Rouge, Louisiana and NASA/MSFC is examining materials for modeling and analysis of heat-activated thermal coupling for joining composite to composite/alloy structures. The short-term objectives of this research are to develop a method for joining composite or alloy structures, as well as to study the effects of thermal stress on composite-to-alloy joints. This investigation will result in the selection of a suitable metallic alloy. Al-Li alloys have potential for this purpose in aerospace applications due to their excellent strength-to-weight ratio. The study of Al-Li and other alloys is of significant importance to this and other aerospace as well as offshore related interests. Further research will incorporate the use of computer aided design and rapid prototype hardware for conceptual design and verification of a potential composite piping delivery system.

Conference on Complex Turbulent Flows: Comparison of Computation and Experiment, Stanford University, Stanford, CA, September 14-18, 1981, Proceedings. Volume 2 - Taxonomies, reporters' summaries, evaluation, and conclusions

NASA Technical Reports Server (NTRS)

Kline, S. J. (Editor); Cantwell, B. J. (Editor); Lilley, G. M.

1982-01-01

Computational techniques for simulating turbulent flows were explored, together with the results of experimental investigations. Particular attention was devoted to the possibility of defining a universal closure model, applicable for all turbulence situations; however, conclusions were drawn that zonal models, describing localized structures, were the most promising techniques to date. The taxonomy of turbulent flows was summarized, as were algebraic, differential, integral, and partial differential methods for numerical depiction of turbulent flows. Numerous comparisons of theoretically predicted and experimentally obtained data for wall pressure distributions, velocity profiles, turbulent kinetic energy profiles, Reynolds shear stress profiles, and flows around transonic airfoils were presented. Simplifying techniques for reducing the necessary computational time for modeling complex flowfields were surveyed, together with the industrial requirements and applications of computational fluid dynamics techniques.

Using social media to promote international student partnerships.

PubMed

Garrett, Bernard M; Cutting, Roger

2012-11-01

This paper describes a project to establish and evaluate online study partnerships, using social networking applications, between final year Canadian nursing students at the University of British Columbia (UBC) and second year undergraduate science education students at the University of Plymouth (UoP) in the UK. The project took place between 2009 and 2010 and evaluated the use of social networking applications with international interdisciplinary partnerships between Canadian and UK students. A multi-method evaluation strategy incorporating questionnaires, online focus groups and web analytics was used to explore the value of social media to promote the exchange of ideas and discussion of scientific philosophy in different contexts, between students working in disciplines with differing philosophical perspectives principally modern/post-modern, quantitative/qualitative, empirical/theoretical. This project resulted in a very successful collaborative partnership between UK and Canadian students. Copyright © 2012 Elsevier Ltd. All rights reserved.

Content analysis of medical students’ seminars: a unique method of analyzing clinical thinking

PubMed Central

2013-01-01

Background The study of communication skills of Asian medical students during structured Problem-based Learning (PBL) seminars represented a unique opportunity to assess their critical thinking development. This study reports the first application of the health education technology, content analysis (CA), to a Japanese web-based seminar (webinar). Methods The authors assigned twelve randomly selected medical students from two universities and two clinical instructors to two virtual classrooms for four PBL structured tutoring sessions that were audio-video captured for CA. Both of the instructors were US-trained physicians. This analysis consisted of coding the students’ verbal comments into seven types, ranging from trivial to advanced knowledge integration comments that served as a proxy for clinical thinking. Results The most basic level of verbal simple responses accounted for a majority (85%) of the total students’ verbal comments. Only 15% of the students’ comments represented more advanced types of critical thinking. The male students responded more than the female students; male students attending University 2 responded more than male students from University 1. The total mean students’ verbal response time for the four sessions with the male instructor was 6.9%; total mean students’ verbal response time for the four sessions with the female instructor was 19% (p < 0.05). Conclusions This report is the first to describe the application of CA to a multi-university real time audio and video PBL medical student clinical training webinar in two Japanese medical schools. These results are preliminary, mostly limited by a small sample size (n = 12) and limited time frame (four sessions). CA technology has the potential to improve clinical thinking for medical students. This report may stimulate improvements for implementation. PMID:24289320

[The application of stereology in radiology imaging and cell biology fields].

PubMed

Hu, Na; Wang, Yan; Feng, Yuanming; Lin, Wang

2012-08-01

Stereology is an interdisciplinary method for 3D morphological study developed from mathematics and morphology. It is widely used in medical image analysis and cell biology studies. Because of its unbiased, simple, fast, reliable and non-invasive characteristics, stereology has been widely used in biomedical areas for quantitative analysis and statistics, such as histology, pathology and medical imaging. Because the stereological parameters show distinct differences in different pathology, many scholars use stereological methods to do quantitative analysis in their studies in recent years, for example, in the areas of the condition of cancer cells, tumor grade, disease development and the patient's prognosis, etc. This paper describes the stereological concept and estimation methods, also illustrates the applications of stereology in the fields of CT images, MRI images and cell biology, and finally reflects the universality, the superiority and reliability of stereology.

A micro-CL system and its applications

NASA Astrophysics Data System (ADS)

Wei, Zenghui; Yuan, Lulu; Liu, Baodong; Wei, Cunfeng; Sun, Cuili; Yin, Pengfei; Wei, Long

2017-11-01

The computed laminography (CL) method is preferable to computed tomography for the non-destructive testing of plate-like objects. A micro-CL system is developed for three-dimensional imaging of plate-like objects. The details of the micro-CL system are described, including the system architecture, scanning modes, and reconstruction algorithm. The experiment results of plate-like fossils, insulated gate bipolar translator module, ball grid array packaging, and printed circuit board are also presented to demonstrate micro-CL's ability for 3D imaging of flat specimens and universal applicability in various fields.

A micro-CL system and its applications.

PubMed

Wei, Zenghui; Yuan, Lulu; Liu, Baodong; Wei, Cunfeng; Sun, Cuili; Yin, Pengfei; Wei, Long

2017-11-01

The computed laminography (CL) method is preferable to computed tomography for the non-destructive testing of plate-like objects. A micro-CL system is developed for three-dimensional imaging of plate-like objects. The details of the micro-CL system are described, including the system architecture, scanning modes, and reconstruction algorithm. The experiment results of plate-like fossils, insulated gate bipolar translator module, ball grid array packaging, and printed circuit board are also presented to demonstrate micro-CL's ability for 3D imaging of flat specimens and universal applicability in various fields.

Fuzzy logic modeling of high performance rechargeable batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, P.; Fennie, C. Jr.; Reisner, D.E.

1998-07-01

Accurate battery state-of-charge (SOC) measurements are critical in many portable electronic device applications. Yet conventional techniques for battery SOC estimation are limited in their accuracy, reliability, and flexibility. In this paper the authors present a powerful new approach to estimate battery SOC using a fuzzy logic-based methodology. This approach provides a universally applicable, accurate method for battery SOC estimation either integrated within, or as an external monitor to, an electronic device. The methodology is demonstrated in modeling impedance measurements on Ni-MH cells and discharge voltage curves of Li-ion cells.

A national assessment of colleges and university school health education methods courses.

PubMed

Fisher, Christine M; Price, James H; Telljohann, Susan K; Dake, Joseph A

2015-04-01

Across the United States, school health education programs provide a wide variety of knowledge and skills to their students. There are currently no guidelines for school health methods courses. Using a 2-wave mailing followed by a third wave e-mail reminder, a final population of 226 university school health methods instructors at school health preparation programs were surveyed. A total of 138 completed surveys (61%) were returned. The topics taught in school health education methods courses emphasized the most included aligning objectives, instruction, and assessment (79%); development of lesson plans (73%); teaching methods that engage learners (72%); and application of the National Health Education Standards and performance indicators (69%). The content taught and how the instructors assessed their students differed statistically by 1 or more of the following: whether they had a health education degree, had experience teaching in the public schools, and if their program was accredited. This study provides information regarding what school health methods instructors across the United States are teaching in their classes. Using this information as a baseline can serve as a guide for preservice faculty teaching a school health methods course. © 2015, American School Health Association.

Valuing the scholarship of integration and the scholarship of application in the academy for health sciences scholars: recommended methods

PubMed Central

Hofmeyer, Anne; Newton, Mandi; Scott, Cathie

2007-01-01

In the landmark 1990 publication Scholarship Reconsidered, Boyer challenged the 'teaching verses research debates' by advocating for the scholarship of discovery, teaching, integration, and application. The scholarship of discovery considers publications and research as the yardstick in the merit, promotion and tenure system the world over. But this narrow view of scholarship does not fully support the obligations of universities to serve global societies and to improve health and health equity. Mechanisms to report the scholarship of teaching have been developed and adopted by some universities. In this article, we contribute to the less developed areas of scholarship, i.e. integration and application. We firstly situate the scholarship of discovery, teaching, integration and application within the interprofessional and knowledge exchange debates. Second, we propose a means for health science scholars to report the process and outcomes of the scholarship of integration and application with other disciplines, decision-makers and communities. We conclude with recommendations for structural and process change in faculty merit, tenure, and promotion systems so that health science scholars with varied academic portfolios are valued and many forms of academic scholarship are sustained. It is vital academic institutions remain relevant in an era when the production of knowledge is increasingly recognized as a social collaborative activity. PMID:17535436

Does active application of universal adhesives to enamel in self-etch mode improve their performance?

PubMed

Loguercio, Alessandro D; Muñoz, Miguel Angel; Luque-Martinez, Issis; Hass, Viviane; Reis, Alessandra; Perdigão, Jorge

2015-09-01

To evaluate the effect of adhesion strategy on the enamel microshear bond strengths (μSBS), etching pattern, and in situ degree of conversion (DC) of seven universal adhesives. 84 extracted third molars were sectioned in four parts (buccal, lingual, proximal) and divided into 21 groups, according to the combination of the main factors adhesive (AdheSE Universal [ADU], All-Bond Universal [ABU], Clearfil Universal [CFU], Futurabond U [FBU], G-Bond Plus [GBP], Prime&Bond Elect (PBE), and Scotchbond Universal Adhesive [SBU]), and adhesion strategy (etch-and-rinse, active self-etch, and passive self-etch). Specimens were stored in water (37°C/24h) and tested at 1.0mm/min (μSBS). Enamel-resin interfaces were evaluated for DC using micro-Raman spectroscopy. The enamel-etching pattern was evaluated under a field-emission scanning electron microscope (direct and replica techniques). Data were analyzed with two-way ANOVA and Tukey's test (α=0.05). Active self-etch application increased μSBS and DC for five out of the seven universal adhesives when compared to passive application (p<0.001). A deeper enamel-etching pattern was observed for all universal adhesives in the etch-and-rinse strategy. A slight improvement in etching ability was observed in active self-etch application compared to that of passive self-etch application. Replicas of GBP and PBE applied in active self-etch mode displayed morphological features compatible with water droplets. The DC of GBP and PBE were not affected by the application/strategy mode. In light of the improved performance of universal adhesives when applied actively in SE mode, selective enamel etching with phosphoric acid may not be crucial for their adhesion to enamel. The active application of universal adhesives in self-etch mode may be a practical alternative to enamel etching in specific clinical situations. Copyright © 2015 Elsevier Ltd. All rights reserved.

Generalization of the Engineering Method to the UNIVERSAL METHOD.

ERIC Educational Resources Information Center

Koen, Billy Vaughn

1987-01-01

Proposes that there is a universal method for all realms of knowledge. Reviews Descartes's definition of the universal method, the engineering definition, and the philosophical basis for the universal method. Contends that the engineering method best represents the universal method. (ML)

A generally applicable lightweight method for calculating a value structure for tools and services in bioinformatics infrastructure projects.

PubMed

Mayer, Gerhard; Quast, Christian; Felden, Janine; Lange, Matthias; Prinz, Manuel; Pühler, Alfred; Lawerenz, Chris; Scholz, Uwe; Glöckner, Frank Oliver; Müller, Wolfgang; Marcus, Katrin; Eisenacher, Martin

2017-10-30

Sustainable noncommercial bioinformatics infrastructures are a prerequisite to use and take advantage of the potential of big data analysis for research and economy. Consequently, funders, universities and institutes as well as users ask for a transparent value model for the tools and services offered. In this article, a generally applicable lightweight method is described by which bioinformatics infrastructure projects can estimate the value of tools and services offered without determining exactly the total costs of ownership. Five representative scenarios for value estimation from a rough estimation to a detailed breakdown of costs are presented. To account for the diversity in bioinformatics applications and services, the notion of service-specific 'service provision units' is introduced together with the factors influencing them and the main underlying assumptions for these 'value influencing factors'. Special attention is given on how to handle personnel costs and indirect costs such as electricity. Four examples are presented for the calculation of the value of tools and services provided by the German Network for Bioinformatics Infrastructure (de.NBI): one for tool usage, one for (Web-based) database analyses, one for consulting services and one for bioinformatics training events. Finally, from the discussed values, the costs of direct funding and the costs of payment of services by funded projects are calculated and compared. © The Author 2017. Published by Oxford University Press.

[Modeling the academic performance of medical students in basic sciences and pre-clinical courses: a longitudinal study].

PubMed

Zúñiga, Denisse; Mena, Beltrán; Oliva, Rose; Pedrals, Nuria; Padilla, Oslando; Bitran, Marcela

2009-10-01

The study of predictors of academic performance is relevant for medical education. Most studies of academic performance use global ratings as outcome measure, and do not evaluate the influence of the assessment methods. To model by multivariate analysis, the academic performance of medical considering, besides academic and demographic variables, the methods used to assess students' learning and their preferred modes of information processing. Two hundred seventy two students admitted to the medical school of the Pontificia Universidad Católica de Chile from 2000 to 2003. Six groups of variables were studied to model the students' performance in five basic science courses (Anatomy, Biology, Calculus, Chemistry and Physics) and two pre-clinical courses (Integrated Medical Clinic I and IT). The assessment methods examined were multiple choice question tests, Objective Structured Clinical Examination and tutor appraisal. The results of the university admission tests (high school grades, mathematics and biology tests), the assessment methods used, the curricular year and previous application to medical school, were predictors of academic performance. The information processing modes influenced academic performance, but only in interaction with other variables. Perception (abstract or concrete) interacted with the assessment methods, and information use (active or reflexive), with sex. The correlation between the real and predicted grades was 0.7. In addition to the academic results obtained prior to university entrance, the methods of assessment used in the university and the information processing modes influence the academic performance of medical students in basic and preclinical courses.

Taking Measure of the Universe: How Big? How Old? How Do We Know?

NASA Astrophysics Data System (ADS)

Kirshner, Robert

1997-11-01

Supernovae, exploding stars that shine as brightly as a billion Suns, areastonishing events which offer the best method for measuring the size andshape of the universe. Professor Kirshner explains how stars explodeand how astronomers piece together clues from these brilliant disastersto understand the age, shape, and fate of the Universe. Click here for more info.Robert P. Kirshner is Professor of Astronomy at Harvard University,where he chaired the department from 1990 to 1997. In Fall 1997 he was onsabbatical at the Institute for Theoretical Physics at the University ofCalifornia, Santa Barbara.Kirshner's scientific work has centered on supernova explosions andtheir application to measuring t he Universe. The author of over 150scientific publications, Kirshner is Principal Investigator for SINS, theSupernova Intensive Study with the Hubble Space Telescope. He is a memberof the American Academy of Arts and Sciences.At Harvard, Kirshner teaches a large core curriculum coursecalled Matter in the Universe. Dubbed "the David Letterman of astronomy"by his colleagues for his entertaining lecture manner, he has writtenpopular articles for National Geographic, ScientificAmerican, Natural History, Sky and Telescope, and theWorld Book Encyclopedia.

Application of step-frequency radars in medicine

NASA Astrophysics Data System (ADS)

Anishchenko, L.; Alekhin, M.; Tataraidze, A.; Ivashov, S.; Bugaev, Alexander S.; Soldovieri, F.

2014-05-01

The paper summarizes results of step-frequency radars application in medicine. Remote and non-contact control of physiological parameters with modern bioradars provides a wide range of possibilities for non-contact remote monitoring of a human psycho-emotional state and physiological condition. The paper provides information about technical characteristics of bioradars designed at Bauman Moscow State Technical University and experiments using them. Results of verification experiment showed that bioradars of BioRASCAN type may be used for simultaneous remote measurements of breathing and heart rate parameters. In addition, bioradar assisted experiments for detecting of different sleep disorders are described. Their results proved that method of bioradiolocation allows correct estimation of obstructive sleep apnea severity compared to the polysomnography method, which satisfies standard medical recommendations.

Annual Symposium on Machine Processing of Remotely Sensed Data, 4th, Purdue University, West Lafayette, Ind., June 21-23, 1977, Proceedings

NASA Technical Reports Server (NTRS)

Morrison, D. B. (Editor); Scherer, D. J.

1977-01-01

Papers are presented on a variety of techniques for the machine processing of remotely sensed data. Consideration is given to preprocessing methods such as the correction of Landsat data for the effects of haze, sun angle, and reflectance and to the maximum likelihood estimation of signature transformation algorithm. Several applications of machine processing to agriculture are identified. Various types of processing systems are discussed such as ground-data processing/support systems for sensor systems and the transfer of remotely sensed data to operational systems. The application of machine processing to hydrology, geology, and land-use mapping is outlined. Data analysis is considered with reference to several types of classification methods and systems.

A simple and low-cost chip bonding solution for high pressure, high temperature and biological applications.

PubMed

Serra, M; Pereiro, I; Yamada, A; Viovy, J-L; Descroix, S; Ferraro, D

2017-02-14

The sealing of microfluidic devices remains a complex and time-consuming process requiring specific equipment and protocols: a universal method is thus highly desirable. We propose here the use of a commercially available sealing tape as a robust, versatile, reversible solution, compatible with cell and molecular biology protocols, and requiring only the application of manually achievable pressures. The performance of the seal was tested with regards to the most commonly used chip materials. For most materials, the bonding resisted 5 bars at room temperature and 1 bar at 95 °C. This method should find numerous uses, ranging from fast prototyping in the laboratory to implementation in low technology environments or industrial production.

Education in applied and instrumental optics at the University of Helsinki

NASA Astrophysics Data System (ADS)

Stenman, Folke

1997-12-01

The teaching of applied and instrumental optics at the University of Helsinki Department of Physics originally grew out of the needs of the research group of molecular physics as a basis for the experimental work in the group. The training program starts with a one-year course for senior undergraduates and graduates comprising geometrical optics, eikonal theory, image forming components, matrix methods, optical instruments, the optics of laser beams, radiometry and photometry, ray tracing methods, optics of anisotropic media, diffraction theory, general image formation theory and Fourier optics. The course starts from fundamentals, but the mathematical level is kept adequate for serious work. Further applications are treated in courses on molecular spectroscopy, where ruled and holographic diffraction gratings (both plane and spherical), interferometric spectroscopy and imaging properties of spectral equipment are treated. Aspects of image analysis, information in optics, signal-to-noise ratio, etc. are treated in separate courses on Fourier method and digital spectral analysis. The applicability of optical techniques to various fields of physics and engineering and the analogies with them are especially brought out. Experimental and calculational and skills are stressed throughout. Computer programming is introduced as an indispensable tool for the optics practitioner, and the students are required to write programs of their own. The students gain practical experience, e.g., by working in the molecular physics group. Close cooperation is maintained with other research groups in laser physics, ultrasonics and physical chemistry. The training in optics has proved very useful, with students frequently ending up working in the industry on optics and spectroscopy problems. Parts of these courses have also been given at other universities and to engineers and scientists working in the industry.

FRED 2: an immunoinformatics framework for Python.

PubMed

Schubert, Benjamin; Walzer, Mathias; Brachvogel, Hans-Philipp; Szolek, András; Mohr, Christopher; Kohlbacher, Oliver

2016-07-01

Immunoinformatics approaches are widely used in a variety of applications from basic immunological to applied biomedical research. Complex data integration is inevitable in immunological research and usually requires comprehensive pipelines including multiple tools and data sources. Non-standard input and output formats of immunoinformatics tools make the development of such applications difficult. Here we present FRED 2, an open-source immunoinformatics framework offering easy and unified access to methods for epitope prediction and other immunoinformatics applications. FRED 2 is implemented in Python and designed to be extendable and flexible to allow rapid prototyping of complex applications. FRED 2 is available at http://fred-2.github.io schubert@informatik.uni-tuebingen.de Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.

Radar research at the University of Kansas

NASA Astrophysics Data System (ADS)

Blunt, Shannon D.; Allen, Christopher; Arnold, Emily; Hale, Richard; Hui, Rongqing; Keshmiri, Shahriar; Leuschen, Carlton; Li, Jilu; Paden, John; Rodriguez-Morales, Fernando; Salandrino, Alessandro; Stiles, James

2017-05-01

Radar research has been synonymous with the University of Kansas (KU) for over half a century. As part of this special session organized to highlight significant radar programs in academia, this paper surveys recent and ongoing work at KU. This work encompasses a wide breadth of sensing applications including the remote sensing of ice sheets, autonomous navigation methods for unmanned aerial vehicles (UAVs), novel laser radar capabilities, detection of highenergy cosmic rays using bistatic radar, different forms of waveform diversity such as MIMO radar and pulse agility, and various radar-embedded communication methods. The results of these efforts impact our understanding of the changing nature of the environment, address the proliferation of unmanned systems in the US airspace, realize new sensing modalities enabled by the joint consideration of electromagnetics and signal processing, and greater facilitate radar operation in an increasingly congested and contested spectrum.

Nano-objects as biomaterials: immense opportunities, significant challenges and the important use of surface analytical methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, Donald R.; Shutthanandan, Vaithiyalingam

Nano-sized objects are increasingly important as biomaterials and their surfaces play critical roles in determining their beneficial or deleterious behaviors in biological systems. Important characteristics of nanomaterials that impact their application in many areas are described with a strong focus on the importance of particle surfaces and surface characterization. Understanding aspects of the inherent nature of nano-objects and the important role that surfaces play in these applications is a universal need for any research or product development using such materials in biological applications. The role of surface analysis methods in collecting critical information about the nature of particle surfaces andmore » physicochemical properties of nano-objects is described along with the importance of including sample history and analysis results in a record of provenance information regarding specific batches of nano-objects.« less

Are the results of questionnaires measuring non-cognitive characteristics during the selection procedure for medical school application biased by social desirability?

PubMed Central

Obst, Katrin U.; Brüheim, Linda; Westermann, Jürgen; Katalinic, Alexander; Kötter, Thomas

2016-01-01

Introduction: A stronger consideration of non-cognitive characteristics in Medical School application procedures is desirable. Psychometric tests could be used as an economic supplement to face-to-face interviews which are frequently conducted during university internal procedures for Medical School applications (AdH, Auswahlverfahren der Hochschulen). This study investigates whether the results of psychometric questionnaires measuring non-cognitive characteristics such as personality traits, empathy, and resilience towards stress are vulnerable to distortions of social desirability when used in the context of selection procedures at Medical Schools. Methods: This study took place during the AdH of Lübeck University in August 2015. The following questionnaires have been included: NEO-FFI, SPF, and AVEM. In a 2x1 between-subject experiment we compared the answers from an alleged application condition and a control condition. In the alleged application condition we told applicants that these questionnaires were part of the application procedure. In the control condition applicants were informed about the study prior to completing the questionnaires. Results: All included questionnaires showed differences which can be regarded as social-desirability effects. These differences did not affect the entire scales but, rather, single subscales. Conclusion: These results challenge the informative value of these questionnaires when used for Medical School application procedures. Future studies may investigate the extent to which the differences influence the actual selection of applicants and what implications can be drawn from them for the use of psychometric questionnaires as part of study-place allocation procedures at Medical Schools. PMID:27990471

Are the results of questionnaires measuring non-cognitive characteristics during the selection procedure for medical school application biased by social desirability?

PubMed

Obst, Katrin U; Brüheim, Linda; Westermann, Jürgen; Katalinic, Alexander; Kötter, Thomas

2016-01-01

Introduction: A stronger consideration of non-cognitive characteristics in Medical School application procedures is desirable. Psychometric tests could be used as an economic supplement to face-to-face interviews which are frequently conducted during university internal procedures for Medical School applications (AdH, Auswahlverfahren der Hochschulen). This study investigates whether the results of psychometric questionnaires measuring non-cognitive characteristics such as personality traits, empathy, and resilience towards stress are vulnerable to distortions of social desirability when used in the context of selection procedures at Medical Schools. Methods: This study took place during the AdH of Lübeck University in August 2015. The following questionnaires have been included: NEO-FFI, SPF, and AVEM. In a 2x1 between-subject experiment we compared the answers from an alleged application condition and a control condition. In the alleged application condition we told applicants that these questionnaires were part of the application procedure. In the control condition applicants were informed about the study prior to completing the questionnaires. Results: All included questionnaires showed differences which can be regarded as social-desirability effects. These differences did not affect the entire scales but, rather, single subscales. Conclusion: These results challenge the informative value of these questionnaires when used for Medical School application procedures. Future studies may investigate the extent to which the differences influence the actual selection of applicants and what implications can be drawn from them for the use of psychometric questionnaires as part of study-place allocation procedures at Medical Schools.

Detection of time delays and directional interactions based on time series from complex dynamical systems

NASA Astrophysics Data System (ADS)

Ma, Huanfei; Leng, Siyang; Tao, Chenyang; Ying, Xiong; Kurths, Jürgen; Lai, Ying-Cheng; Lin, Wei

2017-07-01

Data-based and model-free accurate identification of intrinsic time delays and directional interactions is an extremely challenging problem in complex dynamical systems and their networks reconstruction. A model-free method with new scores is proposed to be generally capable of detecting single, multiple, and distributed time delays. The method is applicable not only to mutually interacting dynamical variables but also to self-interacting variables in a time-delayed feedback loop. Validation of the method is carried out using physical, biological, and ecological models and real data sets. Especially, applying the method to air pollution data and hospital admission records of cardiovascular diseases in Hong Kong reveals the major air pollutants as a cause of the diseases and, more importantly, it uncovers a hidden time delay (about 30-40 days) in the causal influence that previous studies failed to detect. The proposed method is expected to be universally applicable to ascertaining and quantifying subtle interactions (e.g., causation) in complex systems arising from a broad range of disciplines.

PREFACE: 3rd International Symposium ''Optics and its Applications''

NASA Astrophysics Data System (ADS)

Calvo, M. L.; Dolganova, I. N.; Gevorgyan, N.; Guzman, A.; Papoyan, A.; Sarkisyan, H.; Yurchenko, S.

2016-01-01

The SPIE.FOCUS Armenia: 3rd International Symposium ''Optics and its Applications'' (OPTICS-2015) http://rau.am/optics2015/ was held in Yerevan, Armenia, in the period October 1 - 5, 2015. The symposium was organized by the International Society for Optics and Photonics (SPIE), the Armenian SPIE student chapter with collaboration of the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-PYRKAL, and the Yerevan State University (YSU). The Symposium was co-organized by the SPIE & OSA student chapters of BMSTU, the Armenian OSA student chapter, and the SPIE student chapters of Lund University and Wroclaw University of Technology. The symposium OPTICS-2015 was dedicated to the International Year of Light and Light-Based Technologies. OPTICS-2015 was devoted to modern topics and optical technologies such as: optical properties of nanostructures, silicon photonics, quantum optics, singular optics & its applications, laser spectroscopy, strong field optics, biomedical optics, nonlinear & ultrafast optics, photonics & fiber optics, and mathematical methods in optics. OPTICS-2015 was attended by 100 scientists and students representing 17 countries: Armenia, China, Czech Republic, France, Georgia, Germany, India, Iran, Italy, Latvia, Mexico, Poland, Russia, Saudi Arabia, Sweden, Ukraine, and USA. Such a broad international community confirmed the important mission of science to be a uniting force between different countries, religions, and nations. We hope that OPTICS-2015 inspired and motivated students and young scientists to work in optics and in science in general. The present volume of Journal of Physics: Conference Series includes proceedings of the symposium covering various aspects of modern problems in optics. We are grateful to all people who were involved in the organization process. We gratefully acknowledge support from SPIE under the Federation of Optics College and University Students (FOCUS) conference grant, as well as contributions from other organizations: the Abdus Salam International Center for Theoretical Physics (ICTP), the Optical Society (OSA), the Laboratory of Terahertz Technology of Bauman Moscow State Technical University (BMSTU), the RAU, the LT-Pyrkal, the King Abdullah University of Science and Technology (KAUST), IPR of NAS, and Ritea.

Relation between scattering and production amplitude--Case of intermediate {sigma}-particle in {pi}{pi}-system--

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishida, Muneyuki; Ishida, Shin; Ishida, Taku

1998-05-29

The relation between scattering and production amplitudes are investigated, using a simple field theoretical model, from the general viewpoint of unitarity and the applicability of final state interaction (FSI-) theorem. The IA-method and VMW-method, which are applied to our phenomenological analyses [2,3] suggesting the {sigma}-existence, are obtained as the physical state representations of scattering and production amplitudes, respectively. Moreover, the VMW-method is shown to be an effective method to obtain the resonance properties from general production processes, while the conventional analyses based on the 'universality' of {pi}{pi}-scattering amplitude are powerless for this purpose.

Relation between scattering and production amplitude—Case of intermediate σ-particle in ππ-system—

NASA Astrophysics Data System (ADS)

Ishida, Muneyuki; Ishida, Shin; Ishida, Taku

1998-05-01

The relation between scattering and production amplitudes are investigated, using a simple field theoretical model, from the general viewpoint of unitarity and the applicability of final state interaction (FSI-) theorem. The IA-method and VMW-method, which are applied to our phenomenological analyses [2,3] suggesting the σ-existence, are obtained as the physical state representations of scattering and production amplitudes, respectively. Moreover, the VMW-method is shown to be an effective method to obtain the resonance properties from general production processes, while the conventional analyses based on the "universality" of ππ-scattering amplitude are powerless for this purpose.

Crossover ensembles of random matrices and skew-orthogonal polynomials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kumar, Santosh, E-mail: skumar.physics@gmail.com; Pandey, Akhilesh, E-mail: ap0700@mail.jnu.ac.in

2011-08-15

Highlights: > We study crossover ensembles of Jacobi family of random matrices. > We consider correlations for orthogonal-unitary and symplectic-unitary crossovers. > We use the method of skew-orthogonal polynomials and quaternion determinants. > We prove universality of spectral correlations in crossover ensembles. > We discuss applications to quantum conductance and communication theory problems. - Abstract: In a recent paper (S. Kumar, A. Pandey, Phys. Rev. E, 79, 2009, p. 026211) we considered Jacobi family (including Laguerre and Gaussian cases) of random matrix ensembles and reported exact solutions of crossover problems involving time-reversal symmetry breaking. In the present paper we givemore » details of the work. We start with Dyson's Brownian motion description of random matrix ensembles and obtain universal hierarchic relations among the unfolded correlation functions. For arbitrary dimensions we derive the joint probability density (jpd) of eigenvalues for all transitions leading to unitary ensembles as equilibrium ensembles. We focus on the orthogonal-unitary and symplectic-unitary crossovers and give generic expressions for jpd of eigenvalues, two-point kernels and n-level correlation functions. This involves generalization of the theory of skew-orthogonal polynomials to crossover ensembles. We also consider crossovers in the circular ensembles to show the generality of our method. In the large dimensionality limit, correlations in spectra with arbitrary initial density are shown to be universal when expressed in terms of a rescaled symmetry breaking parameter. Applications of our crossover results to communication theory and quantum conductance problems are also briefly discussed.« less

Inkjet-Printed Biofunctional Thermo-Plasmonic Interfaces for Patterned Neuromodulation.

PubMed

Kang, Hongki; Lee, Gu-Haeng; Jung, Hyunjun; Lee, Jee Woong; Nam, Yoonkey

2018-02-27

Localized heat generation by the thermo-plasmonic effect of metal nanoparticles has great potential in biomedical engineering research. Precise patterning of the nanoparticles using inkjet printing can enable the application of the thermo-plasmonic effect in a well-controlled way (shape and intensity). However, a universally applicable inkjet printing process that allows good control in patterning and assembly of nanoparticles with good biocompatibility is missing. Here we developed inkjet-printing-based biofunctional thermo-plasmonic interfaces that can modulate biological activities. We found that inkjet printing of plasmonic nanoparticles on a polyelectrolyte layer-by-layer substrate coating enables high-quality, biocompatible thermo-plasmonic interfaces across various substrates (rigid/flexible, hydrophobic/hydrophilic) by induced contact line pinning and electrostatically assisted nanoparticle assembly. We experimentally confirmed that the generated heat from the inkjet-printed thermo-plasmonic patterns can be applied in micrometer resolution over a large area. Lastly, we demonstrated that the patterned thermo-plasmonic effect from the inkjet-printed gold nanorods can selectively modulate neuronal network activities. This inkjet printing process therefore can be a universal method for biofunctional thermo-plasmonic interfaces in various bioengineering applications.

Celebrating Literacy. Proceedings of the Annual Reading Conference at California State University (14th, San Bernadino, California, March 5, 1990).

ERIC Educational Resources Information Center

Atwell, Margaret, Ed.; Klein, Adria, Ed.

The paper presented at this conference, the theme of which was "Celebrating Literacy," focused on theories and applications of literature-based education and the use of holistic methods across the curriculum. Following an introduction by the editors, the book contains the following 12 papers: "Windows and Mirrors: Children's Books…

The Influence of Organizational Image on College Selection: What Students Seek in Institutions of Higher Education

ERIC Educational Resources Information Center

Pampaloni, Andrea M.

2010-01-01

Colleges and universities rely on their image to attract new members. This study focuses on the decision-making process of students preparing to apply to college. High school students were surveyed at college open houses to identify the factors most influential to their college application decision-making. A multi-methods analysis found that…

Application of Fuzzy Delphi Method in Exploring Facebook as a Tool for Writing Therapy among Young Adults

ERIC Educational Resources Information Center

Tee, Ying Qin; Mohamed, Anizah; Alias, Norlidah

2014-01-01

Social media sites including Facebook are increasingly accessed and integrated in the counselling and psychotherapy profession. As there is a universal escalation of mental and emotional health needs in today's society especially among young adults, Facebook as a popular social networking site for Malaysian youths could be taken advantage as a…

Improving Ion Mobility Spectrometry Detection Methods for Trace Forensics and Military Field Applications

DTIC Science & Technology

2016-10-11

UNIFORMED SERVICES UNIVERSITY OF THE HEALTH SCIENCES F. EDWARD HEBERT SCHOOL OF MEDICINE 4301 JONES BRIDGE ROAD BETHESDA, MARYLAND 20814-4799...ofPublic Health (Dr.P.H.) Master ofScience Degrees Departmental -Clinical Psychology -Environmental Health Sciences -Medical Psychology -Medical...Zoology -Pathology Interdisciplinary -Emerging Infectious Diseases -Molecular & Cell Biology -Neuroscience -Molecular & Cell Biology -Public Health Masters

Microwave Plasma Based Single-Step Method for Generation of Carbon Nanostructures

DTIC Science & Technology

2013-07-01

Técnico, Technical University of Lisbon, Portugal 2 Mechanical and Aerospace Engeneering , Naval Postgraduate School, Monterey, CA 93943, U.S.A...Plasma environments constitute powerful tools in materials science due to their operation as thermal and chemical reactors. A microwave, atmospheric...applications include electronic devices, transparent conductive films, mechanical devices, chemical sensors, spintronic devices. Moreover, it shows enormous

Editorial

NASA Astrophysics Data System (ADS)

Xiao, Guoqing; Shen, Hao; Du, Guanghua

2017-08-01

This special issue of Nuclear Instruments and Methods B contains the proceedings of the 15th International Conference on Nuclear Microprobe Technology and Applications (ICNMTA2016) and the 6th International Workshop on Proton Beam Writing held in Lanzhou, China, from 31 July to 5 August 2016. The conference was hosted by the Institute of Modern Physics, Chinese Academy of Sciences and was co-organized by Fudan University.

[Odontology and the beginning of cartesianism (1673--1650) (Rene Descartes)].

PubMed

Gysel, C

1979-01-01

In the seventeenth century the universities of the Netherlands underwent the influence of Descartes in all the faculties. In medicine three periods can be distinguished: in the first, pathology and therapy are still galenic; the second, by the application of the cartesian method, triumphs in physiology; and the third, corrected by the views of Newton is integrated in a moderate biomechanism.

Advanced Digital Forensic and Steganalysis Methods

DTIC Science & Technology

2009-02-01

investigation is simultaneously cropped, scaled, and processed, extending the technology when the digital image is printed, developing technology capable ...or other common processing operations). TECNOLOGY APPLICATIONS 1. Determining the origin of digital images 2. Matching an image to a camera...Technology Transfer and Innovation Partnerships Division of Research P.O. Box 6000 State University of New York Binghamton, NY 13902-6000 Phone: 607-777

The Writing of Chinese Characters by CFL Learners: Can Writing on Facebook and Using Machine Translation Help?

ERIC Educational Resources Information Center

Zhang, Qi; Lu, Zhouxiang

2014-01-01

The current study investigates the applications of the pinyin input system, a Chinese word processing method, for writing on Facebook in order to help CFL (Chinese as a foreign language) learners from two Irish universities to improve their handwriting in Chinese characters on paper. The data were collected from writing activities conducted over…

[Evaluation of the risk related to repetitive work activities: testing of several methods proposed in the literature].

PubMed

Capodaglio, E M; Facioli, M; Bazzini, G

2001-01-01

Pathologies due to the repetitive activity of the upper limbs constitutes a growing part of the work-related musculo-skeletal disorders. At the moment, there are no universally accepted and validated methods for the description and assessment of the work-related risks. Yet, the criteria fundamentally characterizing the exposure are rather clear and even. This study reports a practical example of the application of some recent risk assessment methods proposed in the literature, combining objective and subjective measures obtained on the field, with the traditional activity analysis.

Optimal model-based sensorless adaptive optics for epifluorescence microscopy.

PubMed

Pozzi, Paolo; Soloviev, Oleg; Wilding, Dean; Vdovin, Gleb; Verhaegen, Michel

2018-01-01

We report on a universal sample-independent sensorless adaptive optics method, based on modal optimization of the second moment of the fluorescence emission from a point-like excitation. Our method employs a sample-independent precalibration, performed only once for the particular system, to establish the direct relation between the image quality and the aberration. The method is potentially applicable to any form of microscopy with epifluorescence detection, including the practically important case of incoherent fluorescence emission from a three dimensional object, through minor hardware modifications. We have applied the technique successfully to a widefield epifluorescence microscope and to a multiaperture confocal microscope.

A novel method for NDT applications using NXCT system at the Missouri University of Science & Technology

NASA Astrophysics Data System (ADS)

Sinha, Vaibhav; Srivastava, Anjali; Koo Lee, Hyoung

2014-06-01

A novel method for non-destructive analysis has been developed using a neutron/X-ray combined computed tomography (NXCT) system at the Missouri University of Science and Technology Reactor (MSTR). This imaging system takes advantage of the fact that neutrons and X-rays have characteristically different interactions with same materials. NXCT fuses the imaging capabilities of both systems at one location and allows instant evaluation for nondestructive testing (NDT) applications. This technique promises viable advances in the field of NDT. In this paper, the complete design criteria and procedures are provided. The described design criteria and procedures can effectively be utilized to design and develop advanced combined computed tomography system. The successful operation of the high resolution X-ray and neutron computed tomography has been demonstrated in this paper. The utility and importance of the NXCT system has been shown by nondestructive evaluation of various phantoms constituting different materials, geometrical, structural and compositional information. The concept of NXCT can be useful for concealed material detection, material characterization, investigation of complex geometries involving different atomic number materials and real time imaging for in-situ studies.

[Gradual effects of therapeutic touch in reducing anxiety in university students].

PubMed

Gomes, Vanessa Miranda; Silva, Maria Júlia Paes da; Araújo, Eutália Aparecida Cândido

2008-01-01

This is quantitative research conducted with 42 students of a public university using the Therapeutic Touch - Krieger-Kunz Method and the application of a questionnaire validated in Brazil to assess anxiety in three sessions. Subjects were divided into two groups: experimental (1), in which the complementary therapy was used; and control (2), in which a mock of the technique, with no therapeutic intention, was applied. The objective was to identify the gradual influence of that health complementary therapy upon the students' state of anxiety. The analysis of the data showed a statistically significant reduction of the state of anxiety in both groups, with pd' 0.05.

A universal heliostat control system

NASA Astrophysics Data System (ADS)

Gross, Fabian; Geiger, Mark; Buck, Reiner

2017-06-01

This paper describes the development of a universal heliostat control system as part of the AutoR project [1]. The system can control multiple receivers and heliostat types in a single application. The system offers support for multiple operators on different machines and is designed to be as adaptive as possible. Thus, the system can be used for different heliostat field setups with only minor adaptations of the system's source code. This is achieved by extensive usage of modern programming techniques like reflection and dependency injection. Furthermore, the system features co-simulation of a ray tracer, a reference PID-controller implementation for open volumetric receivers and methods for heliostat calibration and monitoring.

University of California Should Keep Requiring SAT Subject Tests of Applicants

ERIC Educational Resources Information Center

Mattimore, Patrick

2008-01-01

Last week the Board of Regents of the University of California tabled a faculty proposal to broaden the pool of applicants eligible for admission to the 10 campuses in the University of California system. The regents took the action to allow the university's new president, Mark G. Yudof, as well as regents who were uncertain about the proposal,…

Application of ICT (Information and Communication Technology) in the Management of Universities in the North-Central State of Nigeria

ERIC Educational Resources Information Center

Oboegbulem, Angie Ijeoma; Godwin, Ochai

2013-01-01

This study investigated the application of ICT (information and communication technology) in the management of universities in the north-central Nigeria. The study was a descriptive survey. The population of the study comprised 1,294 respondents in federal and state universities (763 in federal and 531 in state universities). The sample size…

No-Reference Video Quality Assessment Based on Statistical Analysis in 3D-DCT Domain.

PubMed

Li, Xuelong; Guo, Qun; Lu, Xiaoqiang

2016-05-13

It is an important task to design models for universal no-reference video quality assessment (NR-VQA) in multiple video processing and computer vision applications. However, most existing NR-VQA metrics are designed for specific distortion types which are not often aware in practical applications. A further deficiency is that the spatial and temporal information of videos is hardly considered simultaneously. In this paper, we propose a new NR-VQA metric based on the spatiotemporal natural video statistics (NVS) in 3D discrete cosine transform (3D-DCT) domain. In the proposed method, a set of features are firstly extracted based on the statistical analysis of 3D-DCT coefficients to characterize the spatiotemporal statistics of videos in different views. These features are used to predict the perceived video quality via the efficient linear support vector regression (SVR) model afterwards. The contributions of this paper are: 1) we explore the spatiotemporal statistics of videos in 3DDCT domain which has the inherent spatiotemporal encoding advantage over other widely used 2D transformations; 2) we extract a small set of simple but effective statistical features for video visual quality prediction; 3) the proposed method is universal for multiple types of distortions and robust to different databases. The proposed method is tested on four widely used video databases. Extensive experimental results demonstrate that the proposed method is competitive with the state-of-art NR-VQA metrics and the top-performing FR-VQA and RR-VQA metrics.

Mathematical Model and Calibration Experiment of a Large Measurement Range Flexible Joints 6-UPUR Six-Axis Force Sensor

PubMed Central

Zhao, Yanzhi; Zhang, Caifeng; Zhang, Dan; Shi, Zhongpan; Zhao, Tieshi

2016-01-01

Nowadays improving the accuracy and enlarging the measuring range of six-axis force sensors for wider applications in aircraft landing, rocket thrust, and spacecraft docking testing experiments has become an urgent objective. However, it is still difficult to achieve high accuracy and large measuring range with traditional parallel six-axis force sensors due to the influence of the gap and friction of the joints. Therefore, to overcome the mentioned limitations, this paper proposed a 6-Universal-Prismatic-Universal-Revolute (UPUR) joints parallel mechanism with flexible joints to develop a large measurement range six-axis force sensor. The structural characteristics of the sensor are analyzed in comparison with traditional parallel sensor based on the Stewart platform. The force transfer relation of the sensor is deduced, and the force Jacobian matrix is obtained using screw theory in two cases of the ideal state and the state of flexibility of each flexible joint is considered. The prototype and loading calibration system are designed and developed. The K value method and least squares method are used to process experimental data, and in errors of kind Ι and kind II linearity are obtained. The experimental results show that the calibration error of the K value method is more than 13.4%, and the calibration error of the least squares method is 2.67%. The experimental results prove the feasibility of the sensor and the correctness of the theoretical analysis which are expected to be adopted in practical applications. PMID:27529244

32 CFR 728.75 - Applicants for cadetship at service academies and applicants for the Uniformed Services...

Code of Federal Regulations, 2012 CFR

2012-07-01

... and applicants for the Uniformed Services University of Health Sciences (USUHS). 728.75 Section 728.75... cadetship at service academies and applicants for the Uniformed Services University of Health Sciences... Sciences (USUHS) will be furnished medical examinations at facilities designated by the DODMERB...

32 CFR 728.75 - Applicants for cadetship at service academies and applicants for the Uniformed Services...

Code of Federal Regulations, 2014 CFR

2014-07-01

... and applicants for the Uniformed Services University of Health Sciences (USUHS). 728.75 Section 728.75... cadetship at service academies and applicants for the Uniformed Services University of Health Sciences... Sciences (USUHS) will be furnished medical examinations at facilities designated by the DODMERB...

32 CFR 728.75 - Applicants for cadetship at service academies and applicants for the Uniformed Services...

Code of Federal Regulations, 2010 CFR

2010-07-01

... and applicants for the Uniformed Services University of Health Sciences (USUHS). 728.75 Section 728.75... cadetship at service academies and applicants for the Uniformed Services University of Health Sciences... Sciences (USUHS) will be furnished medical examinations at facilities designated by the DODMERB...

32 CFR 728.75 - Applicants for cadetship at service academies and applicants for the Uniformed Services...

Code of Federal Regulations, 2011 CFR

2011-07-01

... and applicants for the Uniformed Services University of Health Sciences (USUHS). 728.75 Section 728.75... cadetship at service academies and applicants for the Uniformed Services University of Health Sciences... Sciences (USUHS) will be furnished medical examinations at facilities designated by the DODMERB...

32 CFR 728.75 - Applicants for cadetship at service academies and applicants for the Uniformed Services...

Code of Federal Regulations, 2013 CFR

2013-07-01

... and applicants for the Uniformed Services University of Health Sciences (USUHS). 728.75 Section 728.75... cadetship at service academies and applicants for the Uniformed Services University of Health Sciences... Sciences (USUHS) will be furnished medical examinations at facilities designated by the DODMERB...

Influence of dentin pretreatment on bond strength of universal adhesives.

PubMed

Poggio, Claudio; Beltrami, Riccardo; Colombo, Marco; Chiesa, Marco; Scribante, Andrea

2017-01-01

Objective: The purpose of the present study was to compare bond strength of different universal adhesives under three different testing conditions: when no pretreatment was applied, after 37% phosphoric acid etching and after glycine application. Materials and methods: One hundred and fifty bovine permanent mandibular incisors were used as a substitute for human teeth. Five different universal adhesives were tested: Futurabond M+, Scotchbond Universal, Clearfil Universal Bond, G-Premio BOND, Peak Universal Bond. The adhesive systems were applied following each manufacturer's instructions. The teeth were randomly assigned to three different dentin surface pretreatments: no pretreatment agent (control), 37% phosphoric acid etching, glycine pretreatment. The specimens were placed in a universal testing machine in order to measure and compare bond strength values. Results: The Kruskal-Wallis analysis of variance and the Mann-Whitney test were applied to assess significant differences among the groups. Dentin pretreatments provided different bond strength values for the adhesives tested, while similar values were registered in groups without dentin pretreatment. Conclusions: In the present report, dentin surface pretreatment did not provide significant differences in shear bond strength values of almost all groups. Acid pretreatment lowered bond strength values of Futurabond and Peak Universal Adhesives, whereas glycine pretreatment increased bond strength values of G Praemio Bond adhesive system.

Influence of dentin pretreatment on bond strength of universal adhesives

PubMed Central

Poggio, Claudio; Beltrami, Riccardo; Colombo, Marco; Chiesa, Marco; Scribante, Andrea

2017-01-01

Abstract Objective: The purpose of the present study was to compare bond strength of different universal adhesives under three different testing conditions: when no pretreatment was applied, after 37% phosphoric acid etching and after glycine application. Materials and methods: One hundred and fifty bovine permanent mandibular incisors were used as a substitute for human teeth. Five different universal adhesives were tested: Futurabond M+, Scotchbond Universal, Clearfil Universal Bond, G-Premio BOND, Peak Universal Bond. The adhesive systems were applied following each manufacturer’s instructions. The teeth were randomly assigned to three different dentin surface pretreatments: no pretreatment agent (control), 37% phosphoric acid etching, glycine pretreatment. The specimens were placed in a universal testing machine in order to measure and compare bond strength values. Results: The Kruskal–Wallis analysis of variance and the Mann–Whitney test were applied to assess significant differences among the groups. Dentin pretreatments provided different bond strength values for the adhesives tested, while similar values were registered in groups without dentin pretreatment. Conclusions: In the present report, dentin surface pretreatment did not provide significant differences in shear bond strength values of almost all groups. Acid pretreatment lowered bond strength values of Futurabond and Peak Universal Adhesives, whereas glycine pretreatment increased bond strength values of G Praemio Bond adhesive system. PMID:28642929

Program of Research in Flight Dynamics in The George Washington University at NASA Langley Research Center, Hampton, Virginia

NASA Technical Reports Server (NTRS)

Klein, Vladislav

2002-01-01

The program objectives were defined in the original proposal entitled 'Program of Research in Flight Dynamics in the JIAFS at NASA Langley Research Center' which was originated March 20, 1975, and yearly renewals of the research program dated December 1, 1998 to December 31, 2002. The program included three major topics: 1) Improvement of existing methods and development of new methods for flight and wind tunnel data analysis based on system identification methodology; 2) Application of these methods to flight and wind tunnel data obtained from advanced aircraft; 3) Modeling and control of aircraft. The principal investigator of the program was Dr. Vladislav Klein, Professor Emeritus at The George Washington University, DC. Seven Graduate Research Scholar Assistants (GRSA) participated in the program. The results of the research conducted during four years of the total co-operative period were published in 2 NASA Technical Reports, 3 thesis and 3 papers. The list of these publications is included.

Plutonium Story

DOE R&D Accomplishments Database

Seaborg, G. T.

1981-09-01

The first nuclear synthesis and identification (i.e., the discovery) of the synthetic transuranium element plutonium (isotope /sup 238/Pu) and the demonstration of its fissionability with slow neutrons (isotope /sup 239/Pu) took place at the University of California, Berkeley, through the use of the 60-inch and 37-inch cyclotrons, in late 1940 and early 1941. This led to the development of industrial scale methods in secret work centered at the University of Chicago's Metallurgical Laboratory and the application of these methods to industrial scale production, at manufacturing plants in Tennessee and Washington, during the World War II years 1942 to 1945. The chemical properties of plutonium, needed to devise the procedures for its industrial scale production, were studied by tracer and ultramicrochemical methods during this period on an extraordinarily urgent basis. This work, and subsequent investigations on a worldwide basis, have made the properties of plutonium very well known. Its well studied electronic structure and chemical properties give it a very interesting position in the actinide series of inner transition elements.

iPBS: a universal method for DNA fingerprinting and retrotransposon isolation.

PubMed

Kalendar, Ruslan; Antonius, Kristiina; Smýkal, Petr; Schulman, Alan H

2010-11-01

Molecular markers are essential in plant and animal breeding and biodiversity applications, in human forensics, and for map-based cloning of genes. The long terminal repeat (LTR) retrotransposons are well suited as molecular markers. As dispersed and ubiquitous transposable elements, their "copy and paste" life cycle of replicative transposition leads to new genome insertions without excision of the original element. Both the overall structure of retrotransposons and the domains responsible for the various phases of their replication are highly conserved in all eukaryotes. Nevertheless, up to a year has been required to develop a retrotransposon marker system in a new species, involving cloning and sequencing steps as well as the development of custom primers. Here, we describe a novel PCR-based method useful both as a marker system in its own right and for the rapid isolation of retrotransposon termini and full-length elements, making it ideal for "orphan crops" and other species with underdeveloped marker systems. The method, iPBS amplification, is based on the virtually universal presence of a tRNA complement as a reverse transcriptase primer binding site (PBS) in LTR retrotransposons. The method differs from earlier retrotransposon isolation methods because it is applicable not only to endogenous retroviruses and retroviruses, but also to both Gypsy and Copia LTR retrotransposons, as well as to non-autonomous LARD and TRIM elements, throughout the plant kingdom and to animals. Furthermore, the inter-PBS amplification technique as such has proved to be a powerful DNA fingerprinting technology without the need for prior sequence knowledge.

Pre-Analytical Conditions in Non-Invasive Prenatal Testing of Cell-Free Fetal RHD

PubMed Central

Rieneck, Klaus; Krog, Grethe Risum; Nielsen, Leif Kofoed; Tabor, Ann; Dziegiel, Morten Hanefeld

2013-01-01

Background Non-invasive prenatal testing of cell-free fetal DNA (cffDNA) in maternal plasma can predict the fetal RhD type in D negative pregnant women. In Denmark, routine antenatal screening for the fetal RhD gene (RHD) directs the administration of antenatal anti-D prophylaxis only to women who carry an RhD positive fetus. Prophylaxis reduces the risk of immunization that may lead to hemolytic disease of the fetus and the newborn. The reliability of predicting the fetal RhD type depends on pre-analytical factors and assay sensitivity. We evaluated the testing setup in the Capital Region of Denmark, based on data from routine antenatal RHD screening. Methods Blood samples were drawn at gestational age 25 weeks. DNA extracted from 1 mL of plasma was analyzed for fetal RHD using a duplex method for exon 7/10. We investigated the effect of blood sample transportation time (n = 110) and ambient outdoor temperatures (n = 1539) on the levels of cffDNA and total DNA. We compared two different quantification methods, the delta Ct method and a universal standard curve. PCR pipetting was compared on two systems (n = 104). Results The cffDNA level was unaffected by blood sample transportation for up to 9 days and by ambient outdoor temperatures ranging from -10°C to 28°C during transport. The universal standard curve was applicable for cffDNA quantification. Identical levels of cffDNA were observed using the two automated PCR pipetting systems. We detected a mean of 100 fetal DNA copies/mL at a median gestational age of 25 weeks (range 10–39, n = 1317). Conclusion The setup for real-time PCR-based, non-invasive prenatal testing of cffDNA in the Capital Region of Denmark is very robust. Our findings regarding the transportation of blood samples demonstrate the high stability of cffDNA. The applicability of a universal standard curve facilitates easy cffDNA quantification. PMID:24204719

Applicability of the Tanaka-Johnston and Moyers mixed dentition analyses in Northeast Han Chinese.

PubMed

Sherpa, Jangbu; Sah, Gopal; Rong, Zeng; Wu, Lipeng

2015-06-01

To assess applicability of the Tanaka-Johnston and Moyers prediction methods in a Han ethnic group from Northeast China and to develop prediction equations for this same population. Cross-sectional study. Department of Orthodontics, School of Stomatology, Jiamusi University, Heilongjiang, China. A total of 130 subjects (65 male and 65 female) aged 16-21 years from a Han ethnic group of Northeast China were recruited from dental students and patients seeking orthodontic treatment. Ethnicity was verified by questionnaire. Mesio-distal tooth width was measured using Digital Vernier calipers. Predicted values were obtained from the Tanaka-Johnston and Moyers methods in both arches were compared with the actual measured widths. Based on regression analysis, prediction equations were developed. Tanaka-Johnston equations were not precise, except for the upper arch in males. However, the Moyers 85th percentile in the upper arch and 75th percentile in the lower arch predicted the sum precisely in males. For females, the Moyers 75th percentile predicted the sum precisely for the upper arch, but none of the Moyers percentiles predicted in the lower arch. Both the Tanaka-Johnston and Moyers method may not be applied universally without question. Hence, it may be safer to develop regression equations for specific populations. Validating studies must be conducted to confirm the precision of these newly developed regression equations.

CORALINA: a universal method for the generation of gRNA libraries for CRISPR-based screening.

PubMed

Köferle, Anna; Worf, Karolina; Breunig, Christopher; Baumann, Valentin; Herrero, Javier; Wiesbeck, Maximilian; Hutter, Lukas H; Götz, Magdalena; Fuchs, Christiane; Beck, Stephan; Stricker, Stefan H

2016-11-14

The bacterial CRISPR system is fast becoming the most popular genetic and epigenetic engineering tool due to its universal applicability and adaptability. The desire to deploy CRISPR-based methods in a large variety of species and contexts has created an urgent need for the development of easy, time- and cost-effective methods enabling large-scale screening approaches. Here we describe CORALINA (comprehensive gRNA library generation through controlled nuclease activity), a method for the generation of comprehensive gRNA libraries for CRISPR-based screens. CORALINA gRNA libraries can be derived from any source of DNA without the need of complex oligonucleotide synthesis. We show the utility of CORALINA for human and mouse genomic DNA, its reproducibility in covering the most relevant genomic features including regulatory, coding and non-coding sequences and confirm the functionality of CORALINA generated gRNAs. The simplicity and cost-effectiveness make CORALINA suitable for any experimental system. The unprecedented sequence complexities obtainable with CORALINA libraries are a necessary pre-requisite for less biased large scale genomic and epigenomic screens.

The subject of pedagogy from theory to practice--the view of newly registered nurses.

PubMed

Ivarsson, Bodil; Nilsson, Gunilla

2009-07-01

The aim was to describe, from the newly registered nurses' perspective, specific events when using their pedagogical knowledge in their everyday clinical practice. The design was qualitative and the critical incident technique was used. Data was collected via interviews with ten newly registered nurses who graduated from the same University program 10 months earlier and are now employed at a university hospital. Two categories emerged in the analyses. The first category was "Pedagogical methods in theory" with the sub-categories Theory and the application of the course in practice, Knowledge of pedagogy and Information as a professional competence. The second category was "Pedagogical methods in everyday clinical practice" with sub-categories Factual knowledge versus pedagogical knowledge, Information and relatives, Difficulties when giving information, Understanding information received, Pedagogical tools, Collaboration in teams in pedagogical situations, and Time and giving information. By identifying specific events regarding pedagogical methods the findings can be useful for everyone from teachers and health-care managers to nurse students and newly registered nurses, to improve teaching methods in nurse education.

Factors influencing the results of faculty evaluation in Isfahan University of Medical Sciences.

PubMed

Kamali, Farahnaz; Yamani, Nikoo; Changiz, Tahereh; Zoubin, Fatemeh

2018-01-01

This study aimed to explore factors influencing the results of faculty member evaluation from the viewpoints of faculty members affiliated with Isfahan University of Medical Sciences, Isfahan, Iran. This qualitative study was done using a conventional content analysis method. Participants were faculty members of Isfahan University of Medical Sciences who, considering maximum variation in sampling, were chosen with a purposive sampling method. Semi-structured interviews were held with 11 faculty members until data saturation was reached. The interviews were transcribed verbatim and analyzed with conventional content analysis method for theme development. Further, the MAXQDA software was used for data management. The data analysis led to the development of two main themes, namely, "characteristics of the educational system" and "characteristics of the faculty member evaluation system." The first main theme consists of three categories, i.e. "characteristics of influential people in evaluation," "features of the courses," and "background characteristics." The other theme has the following as its categories: "evaluation methods," "evaluation tools," "evaluation process," and "application of evaluation results." Each category will have its subcategories. Many factors affect the evaluation of faculty members that should be taken into account by educational policymakers for improving the quality of the educational process. In addition to the factors that directly influence the educational system, methodological problems in the evaluation system need special attention.

77 FR 52681 - University of Wisconsin-Madison, et al.; Notice of Consolidated Decision on Applications for Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

... DEPARTMENT OF COMMERCE International Trade Administration University of Wisconsin--Madison, et al... Constitution Avenue NW., Washington, DC Docket Number: 12-026. Applicant: University of Wisconsin--Madison, Madison, WI 53715-1218. Instrument: Electron Microscope. Manufacturer: FEI [[Page 52682

75 FR 67950 - The University of Georgia (UGA), et al.;

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-04

... DEPARTMENT OF COMMERCE International Trade Administration The University of Georgia (UGA), et al.; Notice of Decision on Applications for Duty-Free Entry of Scientific Instruments This is a decision...., NW., Washington, DC. Docket Number: 10-054. Applicant: The University of Georgia (UGA), Athens, GA...

Digging into Debt: The Financial Burden Associated with the Otolaryngology Match.

PubMed

Polacco, Marc A; Lally, Jack; Walls, Andrew; Harrold, Linnea R; Malekzadeh, Sonya; Chen, Eunice Y

2017-06-01

Objective To quantify the cost incurred during the match process for otolaryngology applicants, determine sources of expenditures, and highlight potential methods to alleviate financial burden of the match process. Study Design Cross-sectional. Study Setting Online survey. Subjects and Methods An electronic survey was sent via email to those who applied to the otolaryngology residency programs at Dartmouth-Hitchcock Medical Center and MedStar Georgetown University Hospital during the 2016 application cycle. Questions regarding demographics and experiences with the match were multiple choice, and questions regarding cost were open answer. Data were downloaded and analyzed on Excel and Minitab software. Results Twenty-eight percent of the total 370 applicants completed the survey. The mean cost of away rotations was $2500 (95% confidence interval [CI], $2224-$2776). With application fees and the cost of interviewing, the mean total cost of applying for the 2016 otolaryngology match was $6400 (95% CI, $5710-$7090), with a total range of $1200 to $20,000. Twenty-eight percent of students did not have sufficient funds for applying and interviewing despite seeking out additional monetary resources. Conclusion In 2016, otolaryngology applicants spent a mean of $8900 (95% CI, $7935-$9865) on away rotations, applications, and interviewing. Half of the applicants obtained additional funding to cover this cost, while 28% still did not have sufficient funding. Methods of decreasing cost may include instituting a cap on application number, videoconferencing interviews, regionalizing interviews, and adjusting the interview timeline.

Mission of the University in Science and Technology Discoveries and Applications of the Universal Knowledge within the Various Socio-economics Systems.

ERIC Educational Resources Information Center

Chiang, Gustavo

The mission of the university is fundamentally to interpret, create, and transmit culture and science. The historical development and the needs of the community condition and orientate the university in its task. A rational application of science and technology will contribute to the resolution of many of today's serious problems. A direct…

Unreacted Hugoniots for porous and liquid explosives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gustavsen, R.L.; Sheffield, S.A.

1993-08-01

Numerous authors have measured the Hugoniots of a variety of granular explosives pressed to different densities. Each explosive at each density was typically then treated as a unique material having its own Hugoniot. By combining methods used by Hayes, Sheffield and Mitchell (for describing the Hugoniot of HNS at various densities) with Hermann`s P-{alpha} model, it is only necessary to know some thermodynamic constants or the Hugoniot of the initially solid material and the porous material sound speed to obtain accurate unreacted Hugoniots for the porous explosive. We discuss application of this method to several materials including HMX, PETN, TNT,more » and Tetryl, as well as HNS. We also show that the ``Universal Liquid Hugoniot`` can be used to calculate the unreacted Hugoniot for liquid explosives. With this method only the ambient pressure sound speed and density are needed to predict the Hugoniot. Applications presented include nitromethane and liquid TNT.« less

Leveraging AMI data for distribution system model calibration and situational awareness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peppanen, Jouni; Reno, Matthew J.; Thakkar, Mohini

The many new distributed energy resources being installed at the distribution system level require increased visibility into system operations that will be enabled by distribution system state estimation (DSSE) and situational awareness applications. Reliable and accurate DSSE requires both robust methods for managing the big data provided by smart meters and quality distribution system models. This paper presents intelligent methods for detecting and dealing with missing or inaccurate smart meter data, as well as the ways to process the data for different applications. It also presents an efficient and flexible parameter estimation method based on the voltage drop equation andmore » regression analysis to enhance distribution system model accuracy. Finally, it presents a 3-D graphical user interface for advanced visualization of the system state and events. Moreover, we demonstrate this paper for a university distribution network with the state-of-the-art real-time and historical smart meter data infrastructure.« less

Megalithic Monument of Abuli, Georgia, and Possible Astronomical Signi cance

NASA Astrophysics Data System (ADS)

Jijelava, Badri; Simonia, Irakli

2016-08-01

Background/Objectives: In recent years, in purpose of investigation of the artefacts, the ancient culture and religion, based on the astronomy knowledge play significant role. The aim of this work is to identify the orientations of the religious megalithic complexes and their correlation to the celestial luminaries. Methods/Statistical Analysis: We harmonized the archeological data, ethnographical, historical information and restoration of ancient celestial sphere (using special astronomy application), which give us possibility to identify the correlations between the acronychal or helical rising/ set of luminaries and directions of megalithic objects. Very often such connections are stored in a current folklore too. Findings: This technique of investigations give us more clear understanding of ancient universe. Using this method, we can receive latent information about the ancient Gods - Luminaries, clarify current mythology, date of the megalithic complex. Application/Improvements: This method of investigation is an additional instrument for archeological investigations,

Application of CFCC technology to hot gas filtration applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richlen, S.

1995-06-01

Discussion will feature high temperature filter development under the DOE`s Office of Industrial Technologies Continuous Fiber Ceramic Composite (CFCC) Program. Within the CFCC Program there are four industry projects and a national laboratory technology support project. Atlantic Research, Babcock & Wilcox, DuPont Lanxide Composites, and Textron are developing processing methods to produce CFCC Components with various types of matrices and composites, along with the manufacturing methods to produce industrial components, including high temperature gas filters. The Oak Ridge National Laboratory is leading a National Laboratory/University effort to increase knowledge of such generic and supportive technology areas as environmental degradation, measurementmore » of mechanical properties, long-term performance, thermal shock and thermal cycling, creep and fatigue, and non-destructive characterization. Tasks include composite design, materials characterization, test methods, and performance-related phenomena, that will support the high temperature filter activities of industry and government.« less

Leveraging AMI data for distribution system model calibration and situational awareness

DOE PAGES

Peppanen, Jouni; Reno, Matthew J.; Thakkar, Mohini; ...

2015-01-15

The many new distributed energy resources being installed at the distribution system level require increased visibility into system operations that will be enabled by distribution system state estimation (DSSE) and situational awareness applications. Reliable and accurate DSSE requires both robust methods for managing the big data provided by smart meters and quality distribution system models. This paper presents intelligent methods for detecting and dealing with missing or inaccurate smart meter data, as well as the ways to process the data for different applications. It also presents an efficient and flexible parameter estimation method based on the voltage drop equation andmore » regression analysis to enhance distribution system model accuracy. Finally, it presents a 3-D graphical user interface for advanced visualization of the system state and events. Moreover, we demonstrate this paper for a university distribution network with the state-of-the-art real-time and historical smart meter data infrastructure.« less

The Parker-Sochacki Method of Solving Differential Equations: Applications and Limitations

NASA Astrophysics Data System (ADS)

Rudmin, Joseph W.

2006-11-01

The Parker-Sochacki method is a powerful but simple technique of solving systems of differential equations, giving either analytical or numerical results. It has been in use for about 10 years now since its discovery by G. Edgar Parker and James Sochacki of the James Madison University Dept. of Mathematics and Statistics. It is being presented here because it is still not widely known and can benefit the listeners. It is a method of rapidly generating the Maclauren series to high order, non-iteratively. It has been successfully applied to more than a hundred systems of equations, including the classical many-body problem. Its advantages include its speed of calculation, its simplicity, and the fact that it uses only addition, subtraction and multiplication. It is not just a polynomial approximation, because it yields the Maclaurin series, and therefore exhibits the advantages and disadvantages of that series. A few applications will be presented.

Smartphone addiction among university students in Riyadh, Saudi Arabia

PubMed Central

Alosaimi, Fahad D.; Alyahya, Haifa; Alshahwan, Hatem; Mahyijari, Nawal Al; Shaik, Shaffi A.

2016-01-01

Objectives: To investigate the prevalence and correlates of smartphone addiction among university students in Saudi Arabia. Methods: This cross-sectional study was conducted in King Saud University, Riyadh, Kingdom of Saudi Arabia between September 2014 and March 2015. An electronic self administered questionnaire and the problematic use of mobile phones (PUMP) Scale were used. Results: Out of 2367 study subjects, 27.2% stated that they spent more than 8 hours per day using their smartphones. Seventy-five percent used at least 4 applications per day, primarily for social networking and watching news. As a consequence of using the smartphones, at least 43% had decrease sleeping hours, and experienced a lack of energy the next day, 30% had a more unhealthy lifestyle (ate more fast food, gained weight, and exercised less), and 25% reported that their academic achievement been adversely affected. There are statistically significant positive relationships among the 4 study variables, consequences of smartphone use (negative lifestyle, poor academic achievement), number of hours per day spent using smartphones, years of study, and number of applications used, and the outcome variable score on the PUMP. The mean values of the PUMP scale were 60.8 with a median of 60. Conclusion: University students in Saudi Arabia are at risk of addiction to smartphones; a phenomenon that is associated with negative effects on sleep, levels of energy, eating habits, weight, exercise, and academic performance. PMID:27279515

The effect of double-coating and times on the immediate and 6-month dentin bonding of universal adhesives.

PubMed

Pashaev, Diial; Demirci, Mustafa; Tekçe, Neslihan; Tuncer, Safa; Baydemir, Canan

2017-01-01

The purpose of this study was to evaluate the effect of double-application coats and times on microtensile bond strength (μTBS) and adhesive-dentin interfaces created by dentin adhesive systems after 6 months of storage in water. Two-hundred sixteen extracted non-carious human third molars were selected for the study. Single-Bond Universal (SU) and All-Bond Universal (AU), Adper Easy One (Eo) Self-Etch adhesive and Adper Single-Bond 2 (Sb) etch-and-rinse adhesive were applied to a flat dentin surface using three methods (1): dentin adhesives were applied as recommended by the manufacturers; (2): two consecutive coats of dentin adhesives were applied before photo-polymerization; and (3): a single coat of adhesive was applied but with twice the manufacturers recommended application time. Microtensile bond strength was determined either immediately or after 6 months of water storage. Data were analyzed using one-way analysis of variance and Tukey's post-hoc tests. At 24 h, groups 1, 2, and 3 exhibited statistically similar results for all dentin adhesive systems. For AU-Er, group 3 showed significantly higher bond strength than all group of AU-Se after 6 months. Universal adhesives seemed more stable against water degradation than traditional two-step etch-and-rinse and all-in-one systems within the 6-month period.

Experimental comparison and validation of hot-ball method with guarded hot plate method on polyurethane foams

NASA Astrophysics Data System (ADS)

Hudec, Ján; Glorieux, Christ; Dieška, Peter; Kubičár, Ľudovít

2016-07-01

The Hot-ball method is an innovative transient method for measuring thermophysical properties. The principle is based on heating of a small ball, incorporated in measured medium, by constant heating power and simultaneous measuring of the ball's temperature response since the heating was initiated. The shape of the temperature response depends on thermophysical properties of the medium, where the sensor is placed. This method is patented by Institute of Physics, SAS, where the method and sensors based on this method are being developed. At the beginning of the development of sensors for this method we were oriented on monitoring applications, where relative precision is much more important than accuracy. Meanwhile, the quality of sensors was improved good enough to be used for a new application - absolute measuring of thermophysical parameters of low thermally conductive materials. This paper describes experimental verification and validation of measurement by hot-ball method. Thanks to cooperation with Laboratory of Soft Matter and Biophysics of Catholic University of Leuven in Belgium, established Guarded Hot Plate method was used as a reference. Details about measuring setups, description of the experiments and results of the comparison are presented.

Factors influencing the results of faculty evaluation in Isfahan University of Medical Sciences

PubMed Central

Kamali, Farahnaz; Yamani, Nikoo; Changiz, Tahereh; Zoubin, Fatemeh

2018-01-01

OBJECTIVE: This study aimed to explore factors influencing the results of faculty member evaluation from the viewpoints of faculty members affiliated with Isfahan University of Medical Sciences, Isfahan, Iran. MATERIALS AND METHODS: This qualitative study was done using a conventional content analysis method. Participants were faculty members of Isfahan University of Medical Sciences who, considering maximum variation in sampling, were chosen with a purposive sampling method. Semi-structured interviews were held with 11 faculty members until data saturation was reached. The interviews were transcribed verbatim and analyzed with conventional content analysis method for theme development. Further, the MAXQDA software was used for data management. RESULTS: The data analysis led to the development of two main themes, namely, “characteristics of the educational system” and “characteristics of the faculty member evaluation system.” The first main theme consists of three categories, i.e. “characteristics of influential people in evaluation,” “features of the courses,” and “background characteristics.” The other theme has the following as its categories: “evaluation methods,” “evaluation tools,” “evaluation process,” and “application of evaluation results.” Each category will have its subcategories. CONCLUSIONS: Many factors affect the evaluation of faculty members that should be taken into account by educational policymakers for improving the quality of the educational process. In addition to the factors that directly influence the educational system, methodological problems in the evaluation system need special attention. PMID:29417073

Simulation methods to estimate design power: an overview for applied research

PubMed Central

2011-01-01

Background Estimating the required sample size and statistical power for a study is an integral part of study design. For standard designs, power equations provide an efficient solution to the problem, but they are unavailable for many complex study designs that arise in practice. For such complex study designs, computer simulation is a useful alternative for estimating study power. Although this approach is well known among statisticians, in our experience many epidemiologists and social scientists are unfamiliar with the technique. This article aims to address this knowledge gap. Methods We review an approach to estimate study power for individual- or cluster-randomized designs using computer simulation. This flexible approach arises naturally from the model used to derive conventional power equations, but extends those methods to accommodate arbitrarily complex designs. The method is universally applicable to a broad range of designs and outcomes, and we present the material in a way that is approachable for quantitative, applied researchers. We illustrate the method using two examples (one simple, one complex) based on sanitation and nutritional interventions to improve child growth. Results We first show how simulation reproduces conventional power estimates for simple randomized designs over a broad range of sample scenarios to familiarize the reader with the approach. We then demonstrate how to extend the simulation approach to more complex designs. Finally, we discuss extensions to the examples in the article, and provide computer code to efficiently run the example simulations in both R and Stata. Conclusions Simulation methods offer a flexible option to estimate statistical power for standard and non-traditional study designs and parameters of interest. The approach we have described is universally applicable for evaluating study designs used in epidemiologic and social science research. PMID:21689447

77 FR 39996 - Department of Mechanical Engineering, Texas A&M University, Notice of Decision on Application for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-06

... DEPARTMENT OF COMMERCE International Trade Administration Department of Mechanical Engineering, Texas A&M University, Notice of Decision on Application for Duty-Free Entry of Scientific Instruments...: Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843-3123. Instrument: Arc...

The Applicability of Governance at King Saud University in Riyadh

ERIC Educational Resources Information Center

Kentab, Mohammad Y.

2018-01-01

The problem of the study revolves around the application of the requirements of governance at King Saud University. The study aims to identify the extent of governance requirements at King Saud University as seen by faculty members through transparency, accountability, organizational structure, laws, regulations, and justice. To achieve the…

Virtual biomedical universities and e-learning.

PubMed

Beux, P Le; Fieschi, M

2007-01-01

In this special issue on virtual biomedical universities and e-learning we will make a survey on the principal existing teaching applications of ICT used in medical Schools around the world. In the following we identify five types of research and experiments in this field of medical e-learning and virtual medical universities. The topics of this special issue goes from educational computer program to create and simulate virtual patients with a wide variety of medical conditions in different clinical settings and over different time frames to using distance learning in developed and developing countries program training medical informatics of clinicians. We also present the necessity of good indexing and research tools for training resources together with workflows to manage the multiple source content of virtual campus or universities and the virtual digital video resources. A special attention is given to training new generations of clinicians in ICT tools and methods to be used in clinical settings as well as in medical schools.

Method and application of ocean environmental awareness measurement: Lessons learnt from university students of China.

PubMed

Umuhire, Marie Louise; Fang, Qinhua

2016-01-30

Different studies have proved that enhancing public Ocean Environmental Awareness (OEA) will lead to increased public support for ocean environmental protection. Our study develops a questionnaire to investigate current levels of students' OEA from three aspects including ocean environmental concerns, ocean environment knowledge and willingness to participate in ocean related activities. This questionnaire was applied to students from Xiamen University to understand the OEA of university students in China, of which there are few studies. Using data gathered from a random purposive sample, the OEA level of students in Xiamen University was investigated and then the influencing factors (education, geographical situation, age and gender etc.) were further analyzed. Findings suggest that most students are concerned about the ocean environment but their knowledge is not enough that makes the willingness to participate in ocean related actions limited as well. The results show there is an urgent need to improve students' OEA. Copyright © 2015 Elsevier Ltd. All rights reserved.

On universal knot polynomials

NASA Astrophysics Data System (ADS)

Mironov, A.; Mkrtchyan, R.; Morozov, A.

2016-02-01

We present a universal knot polynomials for 2- and 3-strand torus knots in adjoint representation, by universalization of appropriate Rosso-Jones formula. According to universality, these polynomials coincide with adjoined colored HOMFLY and Kauffman polynomials at SL and SO/Sp lines on Vogel's plane, respectively and give their exceptional group's counterparts on exceptional line. We demonstrate that [m,n]=[n,m] topological invariance, when applicable, take place on the entire Vogel's plane. We also suggest the universal form of invariant of figure eight knot in adjoint representation, and suggest existence of such universalization for any knot in adjoint and its descendant representations. Properties of universal polynomials and applications of these results are discussed.

Application Specific Chemical Information Microprocessor (ASCI mu P)

DTIC Science & Technology

1999-09-30

lithography created channels in polydimethylsiloxane polymer. 1C. Optical micrograph of 100 um line widths using soft lithography Progress has also been made...also collaborated with Dr. Jose Almirall at Florida International University and have accomplished the HPLC method development of explosives detection...analytical materials. We have established the base for LIF electrophoretic chip analysis and similarly for the electrochemcial detection. We have learned the

Predicting Argentine Jet Fuel Prices

DTIC Science & Technology

2007-03-01

en Argentina. El Salvador University, IDICSO. Área Recursos Energéticos y Planificación para el Desarrollo . August 2004. 14 August 2006.http...economics, engineering, and the social and biological sciences (Kutner, 2005:2), but successful application of this method requires not only a deep...iikkiii y εββββ +++++= ,,22,110 ... , (3.1) where y represents the dependent variable (in our case

Nonlinear Multidimensional Assignment Problems Efficient Conic Optimization Methods and Applications

DTIC Science & Technology

2015-06-24

WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Arizona State University School of Mathematical & Statistical Sciences 901 S...SUPPLEMENTARY NOTES 14. ABSTRACT The major goals of this project were completed: the exact solution of previously unsolved challenging combinatorial optimization... combinatorial optimization problem, the Directional Sensor Problem, was solved in two ways. First, heuristically in an engineering fashion and second, exactly

A Method for Populating the Knowledge Base of APTAS, a Domain-Oriented Application Composition System

DTIC Science & Technology

1993-12-01

proposed a domain analysis approach called Feature-Oriented Domain Analysis ( FODA ). The approach identifies prominent features (similarities) and...characteristics of software systems in the domain. Unlike the other domain analysis approaches we have summarized, the re- searchers described FODA in...Domain Analysis ( FODA ) Feasibility Study. Technical Report, Software Engineering Institute, Carnegie Mellon University, Novem- ber 1990. 19. Lee, Kenneth

A Successful Application of Latent Trait Theory to Tailored Achievement Testing.

DTIC Science & Technology

1980-02-01

strategy for achieve- ment test batteries (Research Report 77-6). Minneapolis: University of Minnesota, Department of Psychology , Psychometric Methods...trait models to tailored testing (Research Report 79-1). Columbia: Uni- versity of Missouri, Department of Educational Psychology , 1979. Lord, F. M. A... Psychology Psychometric Research Group Kawauchi, Sendai 980 Educational Testing Service JAPAN Princeton, NJ 08541 Dr. Edwin Shirkey 1 Dr. Kikui

Geometrical optics-based ray field tracing method for complex source beam applications

NASA Astrophysics Data System (ADS)

Gao, Min; Yang, Feng; Cui, Xue-Wu; Wang, Rui

2018-04-01

Not Available Project supported by the National Natural Science Foundation of China (Grant Nos. 61301056 and 61231001), the Fundamental Research Funds for the Central Universities, China (Grant No. ZYGX2014J012), the Fok Ying Tung Education Foundation, China (Grant No. 141062), the Aero-Science Fund, China (Grant No. 20142580012), and the “111” Project (Grant No. B07046).

Non-Invasive Tissue Oxygenation Measurement Systems. Phase 1.

DTIC Science & Technology

1995-10-01

vessels was shown ( in vivo hamster studies) to be a significant factor causing considerable variability in SaO2 in vessels ...shows that trends in blood oxygenation are tracked. The nearly universal applicability and turnkey type measurement capability of pulse oximeters are...approach early in Phase I that might be compatible with laser doppler blood flow measurements. Both methods depend on laser irradiation of the sample

Modification of semiconductor materials with the use of plasma produced by low intensity repetitive laser pulses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolowski, J.; Rosinski, M.; Badziak, J.

2008-03-19

This work reports experiments concerning specific application of laser-produced plasma at IPPLM in Warsaw. A repetitive pulse laser system of parameters: energy up to 0.8 J in a 3.5 ns-pulse, wavelength of 1.06 {mu}m, repetition rate of up to 10 Hz, has been employed in these investigations. The characterisation of laser-produced plasma was performed with the use of 'time-of-flight' ion diagnostics simultaneously with other diagnostic methods. The results of laser-matter interaction were obtained in dependence on laser pulse parameters, illumination geometry and target material. The modified SiO{sub 2} layers and sample surface properties were characterised with the use of differentmore » methods at the Middle-East Technological University in Ankara and at the Warsaw University of technology. The production of the Ge nanocrystallites has been demonstrated for annealed samples prepared in different experimental conditions.« less

Implementation of Kriging Methods in Mobile GIS to Estimate Damage to Buildings in Crisis Scenarios

NASA Astrophysics Data System (ADS)

Laun, S.; Rösch, N.; Breunig, M.; Doori, M. Al

2016-06-01

In the paper an example for the application of kriging methods to estimate damage to buildings in crisis scenarios is introduced. Furthermore, the Java implementations for Ordinary and Universal Kriging on mobile GIS are presented. As variogram models an exponential, a Gaussian and a spherical variogram are tested in detail. Different test constellations are introduced with various information densities. As test data set, public data from the analysis of the 2010 Haiti earthquake by satellite images are pre-processed and visualized in a Geographic Information System. As buildings, topography and other external influences cannot be seen as being constant for the whole area under investigation, semi variograms are calculated by consulting neighboured classified buildings using the so called moving window method. The evaluation of the methods shows that the underlying variogram model is the determining factor for the quality of the interpolation rather than the choice of the kriging method or increasing the information density of a random sample. The implementation is completely realized with the programming language Java. Thereafter, the implemented software component is integrated into GeoTech Mobile, a mobile GIS Android application based on the processing of standardized spatial data representations defined by the Open Geospatial Consortium (OGC). As a result the implemented methods can be used on mobile devices, i.e. they may be transferred to other application fields. That is why we finally point out further research with new applications in the Dubai region.

The coming of age of telecommunications in psychological research and practice.

PubMed

Jerome, Leigh W; DeLeon, Patrick H; James, Larry C; Folen, Raymond; Earles, Jay; Gedney, Jeffrey J

2000-04-01

Rapid and far-reaching technological advances are revolutionizing the ways in which people relate, communicate, and live their daily lives. Technologies that were hardly used a few years ago, such as the Internet, e-mail, and video teleconferencing, are becoming familiar methods for modern communication. Telecommunications will continue to evolve quickly, spawning telehealth applications for research and the provision of clinical care in communities, university settings, clinics, and medical facilities. The impact on psychology will be significant. This article examines the application of developing technologies as they relate to psychology and discusses implications for professional research and practice.

Some Muirhead Mean Operators for Intuitionistic Fuzzy Numbers and Their Applications to Group Decision Making.

PubMed

Liu, Peide; Li, Dengfeng

2017-01-01

Muirhead mean (MM) is a well-known aggregation operator which can consider interrelationships among any number of arguments assigned by a variable vector. Besides, it is a universal operator since it can contain other general operators by assigning some special parameter values. However, the MM can only process the crisp numbers. Inspired by the MM' advantages, the aim of this paper is to extend MM to process the intuitionistic fuzzy numbers (IFNs) and then to solve the multi-attribute group decision making (MAGDM) problems. Firstly, we develop some intuitionistic fuzzy Muirhead mean (IFMM) operators by extending MM to intuitionistic fuzzy information. Then, we prove some properties and discuss some special cases with respect to the parameter vector. Moreover, we present two new methods to deal with MAGDM problems with the intuitionistic fuzzy information based on the proposed MM operators. Finally, we verify the validity and reliability of our methods by using an application example, and analyze the advantages of our methods by comparing with other existing methods.

Quantum Optical Realization of Arbitrary Linear Transformations Allowing for Loss and Gain

NASA Astrophysics Data System (ADS)

Tischler, N.; Rockstuhl, C.; Słowik, K.

2018-04-01

Unitary transformations are routinely modeled and implemented in the field of quantum optics. In contrast, nonunitary transformations, which can involve loss and gain, require a different approach. In this work, we present a universal method to deal with nonunitary networks. An input to the method is an arbitrary linear transformation matrix of optical modes that does not need to adhere to bosonic commutation relations. The method constructs a transformation that includes the network of interest and accounts for full quantum optical effects related to loss and gain. Furthermore, through a decomposition in terms of simple building blocks, it provides a step-by-step implementation recipe, in a manner similar to the decomposition by Reck et al. [Experimental Realization of Any Discrete Unitary Operator, Phys. Rev. Lett. 73, 58 (1994), 10.1103/PhysRevLett.73.58] but applicable to nonunitary transformations. Applications of the method include the implementation of positive-operator-valued measures and the design of probabilistic optical quantum information protocols.

Influence of blood contamination during multimode adhesive application on the microtensile bond strength to dentin.

PubMed

Kucukyilmaz, E; Celik, E U; Akcay, M; Yasa, B

2017-12-01

The present study evaluated the effects of blood contamination performed at different steps of bonding on the microtensile bond strength (μTBS) of multimode adhesives to dentin when using the self-etch approach. Seventy-five molars were randomly assigned to three adhesive groups comprising 25 specimens each: two multimode adhesives [Single Bond Universal (SBU) and All-Bond Universal (ABU)] and a conventional one-step self-etch adhesive [Clearfil S3 Bond Plus (CSBP)]. Each group was subdivided as follows: (1) uncontaminated (control): bonding application/light curing as a positive control; (2) contamination-1 (cont-1): bonding application/light curing/blood contamination/dry as a negative control; (3) contamination-2 (cont-2): bonding application/light curing/blood contamination/rinse/dry; (4) contamination-3 (cont-3): bonding application/blood contamination/dry/bonding re-application/light curing; and (5) contamination-4 (cont-4): bonding application/blood contamination/rinse/dry/bonding re-application/light curing. Dentin specimens were prepared for μTBS testing after the composite resin application. Data were analyzed with two-way ANOVA and post-hoc tests (α = 0.05). μTBS values were similar in cont-3 groups, and ABU/cont-4 and corresponding control groups, but were significantly lower in the other groups than in their control groups (P < 0.05). Cont-1 groups showed the lowest μTBS values (P < 0.05). Neither decontamination method prevented the decrease in μTBS when contamination occurred after light curing. Drying the blood contaminants and reapplying the adhesive may regain the dentin adhesion when contamination occurs before light curing. Alternatively, rinsing and drying contaminants followed by adhesive re-application may be effective depending on adhesive type.

On existence of the σ(600) Its physical implications and related problems

NASA Astrophysics Data System (ADS)

Ishida, Shin

1998-05-01

We make a re-analysis of 1=0 ππ scattering phase shift δ00 through a new method of S-matrix parametrization (IA; interfering amplitude method), and show a result suggesting strongly for the existence of σ-particle-long-sought Chiral partner of π-meson. Furthermore, through the phenomenological analyses of typical production processes of the 2π-system, the pp-central collision and the J/Ψ→ωππ decay, by applying an intuitive formula as sum of Breit-Wigner amplitudes, (VMW; variant mass and width method), the other evidences for the σ-existence are given. The validity of the methods used in the above analyses is investigated, using a simple field theoretical model, from the general viewpoint of unitarity and the applicability of final state interaction (FSI-) theorem, especially in relation to the "universality" argument. It is shown that the IA and VMW are obtained as the physical state representations of scattering and production amplitudes, respectively. The VMW is shown to be an effective method to obtain the resonance properties from production processes, which generally have the unknown strong-phases. The conventional analyses based on the "universality" seem to be powerless for this purpose.

Development of a Web-Based Indoor Navigation System Using an Accelerometer and Gyroscope: A Case Study at The Faculty of Natural Sciences of Comenius University

NASA Astrophysics Data System (ADS)

Štefanička, Tomáš; Ďuračiová, Renata; Seres, Csaba

2017-12-01

As a complex of buildings, the Faculty of Natural Sciences of the Comenius University in Bratislava tends to be difficult to navigate in spite of its size. An indoor navigation application could potentially save a lot of time and frustration. There are currently numerous technologies used in indoor navigation systems. Some of them focus on a high degree of precision and require significant financial investment; others provide only static information about a current location. In this paper we focused on the determination of an approximate location using inertial measurement systems available on most smartphones, i.e., a gyroscope and an accelerometer. The actual position of the device was calculated using "a walk detection method" based on a delayed lack of motion. We have developed an indoor navigation application that relies solely on open source JavaScript libraries to visualize the interior of the building and calculate the shortest path utilizing Dijsktra's routing algorithm. The application logic is located on the client side, so the software is able to work offline. Our solution represents an accessible lowcost and platform-independent web application that can significantly improve navigation at the Faculty of Natural Sciences. Although our application has been developed on a specific building complex, it could be used in other interiors as well.

From "sapienza" to "sapienza, State Archives in Rome". a Looping Effect Bringing Back to the Original Source Comunication and Culture by Innovative and Low Cost 3d Surveying, Imaging Systems and GIS Applications

NASA Astrophysics Data System (ADS)

Paolini, P.; Forti, G.; Catalani, G.; Lucchetti, S.; Menghini, A.; Mirandola, A.; Pistacchio, S.; Porzia, U.; Roberti, M.

2016-04-01

High Quality survey models, realized by multiple Low Cost methods and technologies, as a container to sharing Cultural and Archival Heritage, this is the aim guiding our research, here described in its primary applications. The SAPIENZA building, a XVI century masterpiece that represented the first unified headquarters of University in Rome, plays since year 1936, when the University moved to its newly edified campus, the role of the main venue for the State Archives. By the collaboration of a group of students of the Architecture Faculty, some integrated survey methods were applied on the monument with success. The beginning was the topographic survey, creating a reference on ground and along the monument for the upcoming applications, a GNNS RTK survey followed georeferencing points on the internal courtyard. Dense stereo matching photogrammetry is nowadays an accepted method for generating 3D survey models, accurate and scalable; it often substitutes 3D laser scanning for its low cost, so that it became our choice. Some 360° shots were planned for creating panoramic views of the double portico from the courtyard, plus additional single shots of some lateral spans and of pillars facing the court, as a single operation with a double finality: to create linked panotours with hotspots to web-linked databases, and 3D textured and georeferenced surface models, allowing to study the harmonic proportions of the classical architectural order. The use of free web Gis platforms, to load the work in Google Earth and the realization of low cost 3D prototypes of some representative parts, has been even performed.

BUILDING MODEL ANALYSIS APPLICATIONS WITH THE JOINT UNIVERSAL PARAMETER IDENTIFICATION AND EVALUATION OF RELIABILITY (JUPITER) API

EPA Science Inventory

The open-source, public domain JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) API (Application Programming Interface) provides conventions and Fortran-90 modules to develop applications (computer programs) for analyzing process models. The input ...

A brief overview of NASA Langley's research program in formal methods

NASA Technical Reports Server (NTRS)

1992-01-01

An overview of NASA Langley's research program in formal methods is presented. The major goal of this work is to bring formal methods technology to a sufficiently mature level for use by the United States aerospace industry. Towards this goal, work is underway to design and formally verify a fault-tolerant computing platform suitable for advanced flight control applications. Also, several direct technology transfer efforts have been initiated that apply formal methods to critical subsystems of real aerospace computer systems. The research team consists of six NASA civil servants and contractors from Boeing Military Aircraft Company, Computational Logic Inc., Odyssey Research Associates, SRI International, University of California at Davis, and Vigyan Inc.

Composite Socio-Technical Systems: A Method for Social Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yingchen; He, Fulin; Hao, Jun

In order to model and study the interactions between social on technical systems, a systemic method, namely the composite socio-technical systems (CSTS), is proposed to incorporate social systems, technical systems and the interaction mechanism between them. A case study on University of Denver (DU) campus grid is presented in paper to demonstrate the application of the proposed method. In the case study, the social system, technical system, and the interaction mechanism are defined and modelled within the framework of CSTS. Distributed and centralized control and management schemes are investigated, respectively, and numerical results verifies the feasibility and performance of themore » proposed composite system method.« less

Fire test method for graphite fiber reinforced plastics

NASA Technical Reports Server (NTRS)

Bowles, K. J.

1980-01-01

A potential problem in the use of graphite fiber reinforced resin matrix composites is the dispersal of graphite fibers during accidental fires. Airborne, electrically conductive fibers originating from the burning composites could enter and cause shorting in electrical equipment located in surrounding areas. A test method for assessing the burning characteristics of graphite fiber reinforced composites and the effectiveness of the composites in retaining the graphite fibers has been developed. The method utilizes a modified Ohio State University Rate of Heat Release apparatus. The equipment and the testing procedure are described. The application of the test method to the assessment of composite materials is illustrated for two resin matrix/graphite composite systems.

Assessment of resin-dentin interfacial morphology of two ethanol-based universal adhesives: A scanning electron microscopy study

PubMed Central

Awad, Mohamed Moustafa

2017-01-01

Objective: The objective of this study was to assess the resin-dentin interfacial morphology created by two universal adhesives using scanning electron microscopy (SEM). Materials and Methods: The occlusal surfaces of ten (n = 5) molars were reduced to expose a flat surface of dentin. Two universal adhesives, Scotchbond Universal Adhesive and Tetric N-Bond Universal, were independently applied to air-dried dentin. Light-cured resin-based composite restorative materials were used to incrementally build a composite “buildup.” The specimen was sectioned mesiodistally to expose the resin-dentin interface. The inner surfaces of the specimens were polished. Samples were immersed in hydrochloric acid and then rinsed using distilled water. This was followed by immersion of the samples in 1% sodium hypochlorite solution. Then, samples were thoroughly rinsing with distilled water. Dehydration of samples was performed using ascending concentration of ethyl alcohol. Prepared samples were observed SEM at magnifications ×1500 and x4000. Results: Both universal adhesives could penetrate dentin-forming well-defined resin tags, lateral branches as well as a uniform hybrid layer. Conclusions: Two tested universal adhesives applied in self-etch mode can infiltrate into dentin-producing high-quality interfacial morphology. Similar interfacial morphology may be due to the similarity in composition and application mode. PMID:28729794

[Application of the balanced scorecard for evaluating the training process].

PubMed

Venturoli, Cristiana; Gamberoni, Loredana

2009-01-01

A training project in which nurses acted as tutors to novice nurses was introduced in the Ferrara University Hospital, with the aim of helping them to achieve the skills and professional expertise required in an operating theatre environment. Owing to the involvement of all the surgical divisions of the hospital and the continual addition of new staff, the Balanced Scorecard method (BSC) was used to assess the impact of training on the entire organization. The BSC method, a multidimensional method born in the USA in the 1990's, made it possible to assess the utility of training in the light of achieving institutional goals.

Research on Modularized Design and Allocation of Infectious Disease Prevention and Control Equipment in China.

PubMed

Zhao, Xin; Wang, Yun-Dou; Zhang, Xiao-Feng; Gao, Shu-Tian; Guo, Li-Jun; Sun, Li-Na

2017-06-01

For the prevention and control of newly emergent or sudden infectious diseases, we built an on-site, modularized prevention and control system and tested the equipment by using the clustering analysis method. On the basis of this system, we propose a modular equipment allocation method and 4 applications of this method for different types of infectious disease prevention and control. This will help to improve the efficiency and productivity of anti-epidemic emergency forces and will provide strong technical support for implementing more universal and serialized equipment in China. (Disaster Med Public Health Preparedness. 2017;11:375-382).

Program of Research in Flight Dynamics, The George Washington University at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Murphy, Patrick C. (Technical Monitor); Klein, Vladislav

2005-01-01

The program objectives are fully defined in the original proposal entitled Program of Research in Flight Dynamics in GW at NASA Langley Research Center, which was originated March 20, 1975, and in the renewals of the research program from January 1, 2003 to September 30, 2005. The program in its present form includes three major topics: 1. the improvement of existing methods and development of new methods for wind tunnel and flight data analysis, 2. the application of these methods to wind tunnel and flight test data obtained from advanced airplanes, 3. the correlation of flight results with wind tunnel measurements, and theoretical predictions.

Manmade target extraction based on multistage decision and its application for change detection in polarimetric synthetic aperture radar image

NASA Astrophysics Data System (ADS)

Cong, Runmin; Han, Ping; Li, Chongyi; He, Jiaji; Zhang, Zaiji

2016-09-01

Targets of interest are different in various applications in which manmade targets, such as aircraft, ships, and buildings, are given more attention. Manmade target extraction methods using synthetic aperture radar (SAR) images are designed in response to various demands, which include civil uses, business purposes, and military industries. This plays an increasingly vital role in monitoring, military reconnaissance, and precision strikes. Achieving accurate and complete results through traditional methods is becoming more challenging because of the scattered complexity of polarization in polarimetric synthetic aperture radar (PolSAR) image. A multistage decision-based method is proposed composed of power decision, dominant scattering mechanism decision, and reflection symmetry decision. In addition, the theories of polarimetric contrast enhancement, generalized Y decomposition, and maximum eigenvalue ratio are applied to assist the decision. Fully PolSAR data are adopted to evaluate and verify the approach. Experimental results show that the method can achieve an effective result with a lower false alarm rate and clear contours. Finally, on this basis, a universal framework of change detection for manmade targets is presented as an application of our method. Two sets of measured data are also used to evaluate and verify the effectiveness of the change-detection algorithm.

How health economic evaluation (HEE) contributes to decision-making in public health care: the case of Brazil.

PubMed

Elias, Flávia Tavares Silva; Araújo, Denizar Vianna

2014-01-01

The universal access to a health care system for the Brazilian population was established in 1990. Brazil is a country with no tradition in the production and use of health economic evaluation (HEE) to guide decision making in the public health system. It is only within the last two decades that HEEs using a microeconomic approach have appeared in the academic field. On a national level, HEE and Health Technology Assessment (HTA), in a wider sense, were first taken into account in 2003. Two policies deserve to be mentioned - (i) the regulation of medicines in the Brazilian market, and (ii) science, technology and innovation policy. The latter required the fostering of applied research to encourage the application of methods which employ systematic reviews and economic analyses of cost-effectiveness to guide the incorporation of technologies in the Brazilian health care system. The Ministry of Health has initiated the process of incorporating these new technologies on a federal level during the last ten years. In spite of the improvement of HEE methods at Brazilian universities and research institutes, these technologies have not yet reached the governmental bodies. In Brazil, the main challenge lies in the production, interpretation and application of HEE to all technologies within the access scheme(s), and there is limited capacity building. Setting priorities can be the solution for Brazil to be able to perform HEE for relevant technologies within the access scheme(s) while the universal coverage system struggles with a triple burden of disease. Copyright © 2014. Published by Elsevier GmbH.

Road safety and simulation conferences: an interdisciplinary network for safer roads.

PubMed

Benedetto, Andrea; Calvi, Alessandro

2014-06-01

From 23rd to 25th October 2013 more than 300 researchers attended the 4th International Conference on Road Safety and Simulation (RSS 2013) in Rome, Italy, hosted by the Inter Universities Research Centre for Road Safety (CRISS) at the Department of Engineering of Roma Tre University. The aim of the Conference was to create a common interdisciplinary arena for researchers and professionals involved in road safety, facilitate the exchange of know-how and progress in the last advanced techniques, methods and tools and their applications to safety analysis. This special issue highlights some of the research presented at the Conference. Copyright © 2014 Elsevier B.V. All rights reserved.

Alphabetic List of All DoD Prime Contractors (No Dollars), FY83.

DTIC Science & Technology

1983-01-01

AIRCRAFT PARTS INC UNIVERSAL LINER OF NEW MEXICO INC UNIVERSITY FACULTY ASSOCIATES UNIVERSAL APPLICATORS INC UNIVERSAL LOGISTICS CORP UNIVERSITY MICROFILMS...LTD UNIVERSAL ASPHALT PAVING CO INC UNIVERSAL LUSITANIA MFG CORP UNIVERSITY OF HEALTH SCIENCES THE CONTRACTORS RECEIVING CONTRACTS OF S25,000 OR MORE

On Universal Elements, and Conversion Procedures to and from Position and Velocity

DTIC Science & Technology

1989-07-01

Abstract. An element set is advocated that is familiar (in traditional terms), and yet applicable to all types of orbit without loss of ,: ... accuracy...A Set of Universally Applicable Elements We seek to define a set of universally applicable elements for motion in unperturbed orbits about a centre...respect to 4 , and denote it by , If a particular element set can be chosen that covers every type of orbit , then in principle we regard these elements

Development of High-Pressure Structural and Cellular Biophysics at Miami University

NASA Astrophysics Data System (ADS)

Urayama, Paul

2004-04-01

Pressures found in the biosphere (up to 1200 atm) have large effects on enzyme specificity and activity, molecular associations, protein folding, viral infectivity, and cellular morphology. The importance of pressure in pharmaceuticals, medical, and biomaterials sciences is beginning to be appreciated. Enzyme reactions under high pressure or in supercritical fluids may be promising in the synthesis of pharmaceuticals. High pressure processing of biopolymer networks may be important in producing matrices for biomaterials applications. In medicine, herpes, immunodeficiency viruses, and certain prion proteins are inactivated by pressure, which may be useful in the ex vivo treatment of blood. Even physiologically generated pressures, such as during colon peristalsis, have biological effects, for example, on the adhesion properties of epithelial cells in colon cancer. This presentation describes a new high-pressure structural and cellular biophysics laboratory under development at Miami University. Applications of specific methods, including high-pressure time-resolved fluorescence spectroscopy; high-pressure fluorescence microscopy; and high-pressure x-ray macromolecular crystallography will be discussed.

An assessment of collections at the University of Wisconsin-Madison Health Sciences Libraries: drug resistance.

PubMed

Bergen, P L; Nemec, D

1999-01-01

In December 1997, the authors completed an in-depth collection assessment project at the University of Wisconsin-Madison Health Sciences Libraries. The purpose was to develop a framework for future collection assessment projects by completing a multifaceted evaluation of the libraries' monograph and serial collections in the subject area of drug resistance. Evaluators adapted and synthesized several traditional collection assessment tools, including shelflist measurement, bibliography and standard list checking, and citation analysis. Throughout the project, evaluators explored strategies to overcome some of the problems inherent in the application of traditional collection assessment methods to the evaluation of biomedical collections. Their efforts resulted in the identification of standard monographs and core journals for the subject area, a measurement of the collections' strength relative to the collections of benchmark libraries, and a foundation for future collection development within the subject area. The project's primary outcome was a collection assessment methodology that has potential application to both internal and cooperative collection development in medical, pharmaceutical, and other health sciences libraries.

A Multi-Verse Optimizer with Levy Flights for Numerical Optimization and Its Application in Test Scheduling for Network-on-Chip.

PubMed

Hu, Cong; Li, Zhi; Zhou, Tian; Zhu, Aijun; Xu, Chuanpei

2016-01-01

We propose a new meta-heuristic algorithm named Levy flights multi-verse optimizer (LFMVO), which incorporates Levy flights into multi-verse optimizer (MVO) algorithm to solve numerical and engineering optimization problems. The Original MVO easily falls into stagnation when wormholes stochastically re-span a number of universes (solutions) around the best universe achieved over the course of iterations. Since Levy flights are superior in exploring unknown, large-scale search space, they are integrated into the previous best universe to force MVO out of stagnation. We test this method on three sets of 23 well-known benchmark test functions and an NP complete problem of test scheduling for Network-on-Chip (NoC). Experimental results prove that the proposed LFMVO is more competitive than its peers in both the quality of the resulting solutions and convergence speed.

A Multi-Verse Optimizer with Levy Flights for Numerical Optimization and Its Application in Test Scheduling for Network-on-Chip

PubMed Central

Hu, Cong; Li, Zhi; Zhou, Tian; Zhu, Aijun; Xu, Chuanpei

2016-01-01

We propose a new meta-heuristic algorithm named Levy flights multi-verse optimizer (LFMVO), which incorporates Levy flights into multi-verse optimizer (MVO) algorithm to solve numerical and engineering optimization problems. The Original MVO easily falls into stagnation when wormholes stochastically re-span a number of universes (solutions) around the best universe achieved over the course of iterations. Since Levy flights are superior in exploring unknown, large-scale search space, they are integrated into the previous best universe to force MVO out of stagnation. We test this method on three sets of 23 well-known benchmark test functions and an NP complete problem of test scheduling for Network-on-Chip (NoC). Experimental results prove that the proposed LFMVO is more competitive than its peers in both the quality of the resulting solutions and convergence speed. PMID:27926946

Hybrid petacomputing meets cosmology: The Roadrunner Universe project

NASA Astrophysics Data System (ADS)

Habib, Salman; Pope, Adrian; Lukić, Zarija; Daniel, David; Fasel, Patricia; Desai, Nehal; Heitmann, Katrin; Hsu, Chung-Hsing; Ankeny, Lee; Mark, Graham; Bhattacharya, Suman; Ahrens, James

2009-07-01

The target of the Roadrunner Universe project at Los Alamos National Laboratory is a set of very large cosmological N-body simulation runs on the hybrid supercomputer Roadrunner, the world's first petaflop platform. Roadrunner's architecture presents opportunities and difficulties characteristic of next-generation supercomputing. We describe a new code designed to optimize performance and scalability by explicitly matching the underlying algorithms to the machine architecture, and by using the physics of the problem as an essential aid in this process. While applications will differ in specific exploits, we believe that such a design process will become increasingly important in the future. The Roadrunner Universe project code, MC3 (Mesh-based Cosmology Code on the Cell), uses grid and direct particle methods to balance the capabilities of Roadrunner's conventional (Opteron) and accelerator (Cell BE) layers. Mirrored particle caches and spectral techniques are used to overcome communication bandwidth limitations and possible difficulties with complicated particle-grid interaction templates.

Multidisciplinary research of geothermal modeling

NASA Astrophysics Data System (ADS)

-Ing. Ulvi Arslan, Univ., ., Dr. _., Prof.; Heiko Huber, Dipl.-Ing.

2010-05-01

KEYWORDS Geothermal sciences, geothermics, research, theory and application, numerical calculation, geothermal modeling, Technical University Darmstadt, Ministry of Economics and Technology (BMWi) INTRODUCTION In times of global warming renewable, green energies are getting more and more important. The development of application of geothermal energy as a part of renewable energies in Germany is a multidisciplinary process of fast growing research and improvements. Geothermal energy is the energy, which is stored below earth's surface. The word geothermal derives from the Greek words geo (earth) and thermos (heat), so geothermal is a synonym to earth heat. Geothermal energy is one of the auspicious renewable energies. In average the temperature increases 3°C every 100 m of depth, which is termed as geothermal gradient. Therefore 99 percent of our planet is hotter than 1.000°C, while 99 percent of that last percent is even hotter than 100°C. Already in a depth of about 1 kilometer temperatures of 35 - 40°C can be achieved. While other renewable energies arise less or more from the sun, geothermal energy sources its heat from the earth's interior, which is caused mostly by radioactive decay of persistent isotopes. This means a possibility of a base-loadable form of energy supply. Especially efficient is the use of deep geothermal energy of high-enthalpie reservoirs, which means a high energy potential in low depths. In Germany no high-enthalpie reservoirs are given. To use the given low-enthalpie potential and to generate geothermal power efficiently inventions and improvements need to be performed. An important part of geothermal progresses is performed by universities with multidisciplinary research of geothermal modeling. Especially in deep geothermal systems numerical calculations are essential for a correct dimensioning of the geothermal system. Therefore German universities and state aided organizations are developing numerical programs for a detailed use of application on geothermal systems. The history of this multidisciplinary research of geothermal modeling performed by German universities is shown in this paper. Outstanding geothermal research programs of German universities and state aided organizations (BGR, LBEG, GGA) are pointed out. Actual geothermal modeling programs based on the Finite-Element-Method or the Finite-Differences-Method as well as analytical programs are introduced. National and international geothermal projects supported by German universities and state aided organizations are described. Examples of supervised shallow and deep geothermal systems are given. Actually the Technical University Darmstadt is performing a research program supported by a national organization, the Ministry of Economics and Technology (BMWi). Main aim of this research program titled experimental investigation for the verification of a Finite-Element-Multiphase-Model is to analyze the subsoil as a three-phases-model with separated consideration of conduction, convection and advection and their subsequent interaction. The latest developments of numerical projects as well as the actual state of the before mentioned research program are pointed out in the paper. REFERENCES Quick, H., Arslan, U., Meißner, S., Michael, J. 2007. Deep foundations and geothermal energy - a multi-purpose solution, IFHS: 8. International conference on multi-purpose high-rise towers and tall buildings, Abu Dhabi, 2007 Arslan, U. and Huber, H. 2008. Application of geothermal energy. University of Istanbul, Yapistanbul No. 3 / 2008, Turkey, 2008 Quick, Q., Michael, J., Arslan, U., Huber, H. 2010. History of International Geothermal Power Plants and Geothermal Projects in Germany, Proceedings World Geothermal Congress 2010 Bali, Indonesia, 25-29 April 2010 Arslan, U., Huber, H. 2010. Education of Geothermal Sciences in Germany as part of an application orientated research, Proceedings European Civil Engineering Education and Training (EUCEET III) Special Volume, 2010

Simulation methods to estimate design power: an overview for applied research.

PubMed

Arnold, Benjamin F; Hogan, Daniel R; Colford, John M; Hubbard, Alan E

2011-06-20

Estimating the required sample size and statistical power for a study is an integral part of study design. For standard designs, power equations provide an efficient solution to the problem, but they are unavailable for many complex study designs that arise in practice. For such complex study designs, computer simulation is a useful alternative for estimating study power. Although this approach is well known among statisticians, in our experience many epidemiologists and social scientists are unfamiliar with the technique. This article aims to address this knowledge gap. We review an approach to estimate study power for individual- or cluster-randomized designs using computer simulation. This flexible approach arises naturally from the model used to derive conventional power equations, but extends those methods to accommodate arbitrarily complex designs. The method is universally applicable to a broad range of designs and outcomes, and we present the material in a way that is approachable for quantitative, applied researchers. We illustrate the method using two examples (one simple, one complex) based on sanitation and nutritional interventions to improve child growth. We first show how simulation reproduces conventional power estimates for simple randomized designs over a broad range of sample scenarios to familiarize the reader with the approach. We then demonstrate how to extend the simulation approach to more complex designs. Finally, we discuss extensions to the examples in the article, and provide computer code to efficiently run the example simulations in both R and Stata. Simulation methods offer a flexible option to estimate statistical power for standard and non-traditional study designs and parameters of interest. The approach we have described is universally applicable for evaluating study designs used in epidemiologic and social science research.

Making the Match between Content and Foreign Language: A Case Study on University Students' Opinions towards CLIL

ERIC Educational Resources Information Center

Martin de Lama, M. Teresa

2015-01-01

The present article intends to show the positive evaluation of post-graduate university students at a Spanish university after the curricular integration experience and the application of CLIL scaffolding techniques. It also aims to identify areas of methodological improvements and recommendations in the application of CLIL in the referred…

Gatekeepers or Facilitators: The Influence of Teacher Habitus on Students' Applications to Elite Universities

ERIC Educational Resources Information Center

Oliver, Caroline; Kettley, Nigel

2010-01-01

Low application rates of state school students to elite universities have been identified as a factor in their limited participation in elite universities. This article explores the role of teachers in state schools and colleges in guiding higher education (HE) choice. Drawing on qualitative research with teachers and students in six institutions,…

The Learning Management System at the Defence University: Awareness and Application

ERIC Educational Resources Information Center

Juhary, Jowati

2013-01-01

This brief paper examines the issues of awareness and application of a Learning Management System (LMS) used at the National Defence University of Malaysia (NDUM), Kuala Lumpur Malaysia. The paper argues that due to the discouraging responses from academics at the university on using the LMS, proactive measures must be taken immediately in order…

Developments in laser Doppler blood perfusion monitoring

NASA Astrophysics Data System (ADS)

Leahy, Martin J.; de Mul, Frits F. M.; Nilsson, Gert E.; Maniewski, Roman; Liebert, Adam

2003-03-01

This paper reviews the development and use of laser Doppler perfusion monitors and imagers. Despite their great success and almost universal applicability in microcirculation research, they have had great difficulty in converting to widespread clinical application. The enormous interest in microvascular blood perfusion coupled with the 'ease of use' of the technique has led to 2000+ publications citing its use. However, useful results can only be achieved with an understanding of the basic principles of the instrumentation and its application in the various clinical disciplines. The basic technical background is explored and definitions of blood perfusion and laser Doppler perfusion are established. The calibration method is then described together with potential routes to standardisation. A guide to the limitations in application of the technique gives the user a clear indication of what can be achieved in new studies as well as possible inadequacy in some published investigations. Finally some clinical applications have found acceptability and these will be explored.

The Bottom-up Move within Vygotsky's Zone of Proximal Development: A Pedagogical Application for Teaching Agreement in Spanish as a Foreign Language

ERIC Educational Resources Information Center

Escandon, Arturo; Sanz, Montserrat

2011-01-01

This paper presents the findings of a longitudinal study in which two instructional methods to teach agreement features to first-year university students specializing in Spanish in Japan are compared. On the one hand, the control group was exposed to the traditional top-down teaching of agreement paradigms and were instructed to practice them…

The Effects of an Argument-Based Inquiry Approach on Improving Critical Thinking and the Conceptual Understanding of Optics among Pre-Service Science Teachers

ERIC Educational Resources Information Center

Memis, Esra Kabatas

2016-01-01

The aim of this study was to investigate the effect of the university-level application of an Argument-Based Inquiry Approach, as compared to the traditional laboratory teaching method, on the ability of students to learn about optics and to demonstrate critical thinking. In this quasi-experimental study, pretest-posttest scores and CCDTI were…

Theory and Applications of Weakly Interacting Markov Processes

DTIC Science & Technology

2018-02-03

Moderate deviation principles for stochastic dynamical systems. Boston University, Math Colloquium, March 27, 2015. • Moderate Deviation Principles for...Markov chain approximation method. Submitted. [8] E. Bayraktar and M. Ludkovski. Optimal trade execution in illiquid markets. Math . Finance, 21(4):681...701, 2011. [9] E. Bayraktar and M. Ludkovski. Liquidation in limit order books with controlled intensity. Math . Finance, 24(4):627–650, 2014. [10] P.D

Visualisation of newly synthesised collagen in vitro and in vivo

PubMed Central

Oostendorp, Corien; Uijtdewilligen, Peter J.E.; Versteeg, Elly M.; Hafmans, Theo G.; van den Bogaard, Ellen H.; de Jonge, Paul K.J.D.; Pirayesh, Ali; Von den Hoff, Johannes W.; Reichmann, Ernst; Daamen, Willeke F.; van Kuppevelt, Toin H.

2016-01-01

Identifying collagen produced de novo by cells in a background of purified collagenous biomaterials poses a major problem in for example the evaluation of tissue-engineered constructs and cell biological studies to tumor dissemination. We have developed a universal strategy to detect and localize newly deposited collagen based on its inherent association with dermatan sulfate. The method is applicable irrespective of host species and collagen source. PMID:26738984

Hexographic Method of Complex Town-Planning Terrain Estimate

NASA Astrophysics Data System (ADS)

Khudyakov, A. Ju

2017-11-01

The article deals with the vital problem of a complex town-planning analysis based on the “hexographic” graphic analytic method, makes a comparison with conventional terrain estimate methods and contains the method application examples. It discloses a procedure of the author’s estimate of restrictions and building of a mathematical model which reflects not only conventional town-planning restrictions, but also social and aesthetic aspects of the analyzed territory. The method allows one to quickly get an idea of the territory potential. It is possible to use an unlimited number of estimated factors. The method can be used for the integrated assessment of urban areas. In addition, it is possible to use the methods of preliminary evaluation of the territory commercial attractiveness in the preparation of investment projects. The technique application results in simple informative graphics. Graphical interpretation is straightforward from the experts. A definite advantage is the free perception of the subject results as they are not prepared professionally. Thus, it is possible to build a dialogue between professionals and the public on a new level allowing to take into account the interests of various parties. At the moment, the method is used as a tool for the preparation of integrated urban development projects at the Department of Architecture in Federal State Autonomous Educational Institution of Higher Education “South Ural State University (National Research University)”, FSAEIHE SUSU (NRU). The methodology is included in a course of lectures as the material on architectural and urban design for architecture students. The same methodology was successfully tested in the preparation of business strategies for the development of some territories in the Chelyabinsk region. This publication is the first in a series of planned activities developing and describing the methodology of hexographical analysis in urban and architectural practice. It is also planned to create a software product that allows one to automate the process of site assessment on the basis of the methodology.

The role of ultrasound guidance in pediatric caudal block

PubMed Central

Erbüyün, Koray; Açıkgöz, Barış; Ok, Gülay; Yılmaz, Ömer; Temeltaş, Gökhan; Tekin, İdil; Tok, Demet

2016-01-01

Objectives: To compare the time interval of the procedure, possible complications, post-operative pain levels, additional analgesics, and nurse satisfaction in ultrasonography-guided and standard caudal block applications. Methods: This retrospective study was conducted in Celal Bayar University Hospital, Manisa, Turkey, between January and December 2014, included 78 pediatric patients. Caudal block was applied to 2 different groups; one with ultrasound guide, and the other using the standard method. Results: The time interval of the procedure was significantly shorter in the standard application group compared with ultrasound-guided group (p=0.020). Wong-Baker FACES Pain Rating Scale values obtained at the 90th minute was statistically lower in the standard application group compared with ultrasound-guided group (p=0.035). No statistically significant difference was found on the other parameters between the 2 groups. The shorter time interval of the procedure at standard application group should not be considered as a distinctive mark by the pediatric anesthesiologists, because this time difference was as short as seconds. Conclusion: Ultrasound guidance for caudal block applications would neither increase nor decrease the success of the treatment. However, ultrasound guidance should be needed in cases where the detection of sacral anatomy is difficult, especially by palpations. PMID:26837396

Effect of Bonding Agent Application Method on Titanium-Ceramic Bond Strength.

PubMed

Curtis, Joseph G; Dossett, Jon; Prihoda, Thomas J; Teixeira, Erica C

2015-07-01

Although milled titanium may be used as a substructure in fixed and implant prosthodontics, the application of the veneering porcelain presents particular challenges compared to traditional alloys. To address these challenges, some Ti ceramic systems incorporate the application of a bonding agent prior to the opaque layer. Vita Titankeramik's bonding agent is available as a powder, paste, and spray-on formulation. We examined the effect of these three application methods on the bond strength. Four titanium bars were milled from each of 11 wafers cut from grade II Ti using the Kavo Everest milling unit and a custom-designed milling toolpath. An experienced technician prepared the 25 × 3 × 0.5 mm(3) metal bars and applied bonding agent using one of three application methods, and then applied opaque, dentin, and enamel porcelains according to manufacturer's instructions to a 8 × 3 × 1 mm(3) porcelain. A control group received no bonding agent prior to porcelain application. The four groups (n = 11) were blindly tested for differences in bond strength using a universal testing machine in a three-point bend test configuration, based on ISO 9693-1:2012. The average (SD) bond strengths for the control, powder, paste, and spray-on groups, respectively, were: 24.8 (2.6), 24.6 (2.6), 25.3 (4.0), and 24.1 (3.9) MPa. One-way ANOVA and Tukey's multiple comparison tests were performed between all groups. There were no statistically significant differences among groups (p = 0.951). Titanium-porcelain bond strength was not affected by the use of a bonding agent or its application method when tested by ISO 9693-1 standard. © 2014 by the American College of Prosthodontists.

Enhancing and targeting nucleic acid delivery by magnetic force.

PubMed

Plank, Christian; Anton, Martina; Rudolph, Carsten; Rosenecker, Joseph; Krötz, Florian

2003-08-01

Insufficient contact of inherently highly active nucleic acid delivery systems with target cells is a primary reason for their often observed limited efficacy. Physical methods of targeting can overcome this limitation and reduce the risk of undesired side effects due to non-target site delivery. The authors and others have developed a novel means of physical targeting, exploiting magnetic force acting on nucleic acid vectors associated with magnetic particles in order to mediate the rapid contact of vectors with target cells. Here, the principles of magnetic drug and nucleic acid delivery are reviewed, and the facts and potentials of the technique for research and therapeutic applications are discussed. Magnetically enhanced nucleic acid delivery - magnetofection - is universally applicable to viral and non-viral vectors, is extraordinarily rapid, simple and yields saturation level transfection at low dose in vitro. The method is useful for site-specific vector targeting in vivo. Exploiting the full potential of the technique requires an interdisciplinary research effort in magnetic field physics, magnetic particle chemistry, pharmaceutical formulation and medical application.

Application of Artificial Intelligence Techniques in Unmanned Aerial Vehicle Flight

NASA Technical Reports Server (NTRS)

Bauer, Frank H. (Technical Monitor); Dufrene, Warren R., Jr.

2003-01-01

This paper describes the development of an application of Artificial Intelligence for Unmanned Aerial Vehicle (UAV) control. The project was done as part of the requirements for a class in Artificial Intelligence (AI) at Nova southeastern University and as an adjunct to a project at NASA Goddard Space Flight Center's Wallops Flight Facility for a resilient, robust, and intelligent UAV flight control system. A method is outlined which allows a base level application for applying an AI method, Fuzzy Logic, to aspects of Control Logic for UAV flight. One element of UAV flight, automated altitude hold, has been implemented and preliminary results displayed. A low cost approach was taken using freeware, gnu, software, and demo programs. The focus of this research has been to outline some of the AI techniques used for UAV flight control and discuss some of the tools used to apply AI techniques. The intent is to succeed with the implementation of applying AI techniques to actually control different aspects of the flight of an UAV.

PREFACE: 5th International Conference on Materials and Applications for Sensors and Transducers (IC-MAST2015)

NASA Astrophysics Data System (ADS)

Hristoforou, E.; Vlachos, D. S.; Giouroudi, I.; Kar-Narayan, S.; Potirakis, S.

2016-03-01

The 5th International Conference on Materials and Applications for Sensors and Transducers, Mykonos island, Greece, hosted about 110 oral and poster papers and more than 90 participants. IC-MAS, as an international annual conference which tries to meet the needs for various types of sensors, particularly those which may be manufactured by low cost methods (i.e. hybrid sensors, smart specialization devices, particular applications not necessarily requiring integrated micro-nano technologies), covering all types of materials and physical effects, appears to be a necessity. IC-MAST has been established as a high quality international conference by: I. Gathering together multinational researchers from all over the world, working in different materials for sensors and transducers and technical applications of sensors, but also in some cases in the management of the data coming from sensors and transducers. The careful selection of the conference place (like Aegean Sea, Budapest, Prague, Bilbao, Mykonos etc) allows for enjoying the local hospitality and sightseeing. II. Emphasizing in hybrid sensors and smart specialization devices produced by inexpensive methods, without excluding of course micro-nano technology, from all kinds of solid state, liquid and gaseous materials, as well as in particular transducer applications (design and development, as well as use of sensing data) III. Innovatively implementing the Virtual Paper Concept, allowing for large impact of research works presented in the conference by authors who either have no time or no funding support for visiting a conference; this year more than 12 virtual papers are presented in the 5th IC MAST, following a standardized procedure via the our robust and reliable Conference Site (www.icmast.net!) > IV. Allowing for lengthy technical and managerial discussions in terms of sensor, material and instrumentation development; furthermore, the different research groups gathered together are offered the particular advantage of arranging and concluding research proposals and projects, otherwise not having a visible possibility of such realization The 5th IC-MAST organizing committee is proud that the Conference Keynote Speaker was Prof George Hadjipanayis, University of Delaware. We are also proud for the invited speakers of the conference: • Stergios Logothetidis, Aristotle University of Thessaloniki, Greece • Dimitris Tsoukalas, National Technical University of Athens, Greece • Susana Cardoso de Freitas, INESC Microsistemas e Nanotecnologias • Yuris Dzenis, University of Nebraska-Lincoln, USA The IC-MAST 2015 organizers believe that the target of the Conference has been successfully met by enhancing knowledge in sensors by all participants, accelerating the achievement of results and optimizing the under design products, in a quite friendly way! Therefore, participants made an appointment for the next year in Athens, Greece, where the 6th International MAST Conference will be realized!

Does Shortened Application Time Affect Long-Term Bond Strength of Universal Adhesives to Dentin?

PubMed

Saikaew, P; Matsumoto, M; Chowdhury, Afma; Carvalho, R M; Sano, H

2018-04-09

This study evaluated the effect of shortened application time on long-term bond strength with universal adhesives. Three universal adhesives were used: Clearfil Universal Bond (CU, Kuraray Noritake Dental Inc, Tokyo, Japan), Scotchbond Universal Adhesive (SB, 3M ESPE, St Paul, MN, USA) or G-Premio Bond (GP, GC Corp, Tokyo, Japan). Sixty molars were cut to expose midcoronal dentin and prepared with a regular diamond bur. Each adhesive was applied either according to the manufacturer's instruction or with shortened time. Specimens were stored in distilled water at 37°C for 24 hours and then cut into resin-dentin sticks. Microtensile bond strength (μTBS) was tested after either 24 hours or 1 year of water storage. Data were analyzed by the three-way ANOVA and Duncan tests ( α=0.05). Fracture modes were analyzed under a scanning electron microscope (SEM). One dentin stick per group was selected after fracture mode analysis and further observed using transmission electron microscopy (TEM). Six additional dentin discs were prepared and conditioned with each adhesive under the different application time to observe the adhesive-smear layer interaction by SEM. Shortened application time affected the μTBS ( p<0.001) while storage time did not affect bond strength ( p=0.187). A significant effect of shortened application time on μTBS was observed in the CU at 1 year and in the GP at both storage times. One-year storage time had no effect on the μTBS of universal adhesives to bur-cut dentin. The performance of universal adhesives can be compromised when applied using a shortened application time.

Automated Broad-Range Molecular Detection of Bacteria in Clinical Samples

PubMed Central

Hoogewerf, Martine; Vandenbroucke-Grauls, Christina M. J. E.; Savelkoul, Paul H. M.

2016-01-01

Molecular detection methods, such as quantitative PCR (qPCR), have found their way into clinical microbiology laboratories for the detection of an array of pathogens. Most routinely used methods, however, are directed at specific species. Thus, anything that is not explicitly searched for will be missed. This greatly limits the flexibility and universal application of these techniques. We investigated the application of a rapid universal bacterial molecular identification method, IS-pro, to routine patient samples received in a clinical microbiology laboratory. IS-pro is a eubacterial technique based on the detection and categorization of 16S-23S rRNA gene interspace regions with lengths that are specific for each microbial species. As this is an open technique, clinicians do not need to decide in advance what to look for. We compared routine culture to IS-pro using 66 samples sent in for routine bacterial diagnostic testing. The samples were obtained from patients with infections in normally sterile sites (without a resident microbiota). The results were identical in 20 (30%) samples, IS-pro detected more bacterial species than culture in 31 (47%) samples, and five of the 10 culture-negative samples were positive with IS-pro. The case histories of the five patients from whom these culture-negative/IS-pro-positive samples were obtained suggest that the IS-pro findings are highly clinically relevant. Our findings indicate that an open molecular approach, such as IS-pro, may have a high added value for clinical practice. PMID:26763956

The use of virtual environments for percentage view analysis.

PubMed

Schofield, Damian; Cox, Christopher J B

2005-09-01

It is recognised that Visual Impact Assessment (VIA), unlike many other aspects of Environmental Impact Assessments (EIA), relies less upon measurement than upon experience and judgement. Hence, it is necessary for a more structured and consistent approach towards VIA, reducing the amount of bias and subjectivity. For proposed developments, there are very few quantitative techniques for the evaluation of visibility, and these existing methods can be highly inaccurate and time consuming. Percentage view changes are one of the few quantitative techniques, and the use of computer technology can reduce the inaccuracy and the time spent evaluating the visibility of either existing or proposed developments. For over 10 years, research work undertaken by the authors at the University of Nottingham has employed Computer Graphics (CG) and Virtual Reality (VR) in civilian and industrial contexts for environmental planning, design visualisation, accident reconstruction, risk analysis, data visualisation and training simulators. This paper describes a method to quantitatively assess the visual impact of proposed developments on the landscape using CG techniques. This method allows the determination of accurate percentage view changes with the use of a computer-generated model of the environment and the application of specialist software that has been developed at the University of Nottingham. The principles are easy to understand and therefore planners, authorisation agencies and members of the public can use and understand the results. A case study is shown to demonstrate the application and the capabilities of the technology.

77 FR 30505 - Cornell University, et al.; Notice of Decision on Applications for Duty-Free Entry of Scientific...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

...., Washington, DC Docket Number: 12-011. Applicant: Cornell University, Ithaca, NY 14853. Instrument: Pixel Array Detector. Manufacturer: Dectris Ltd., Switzerland. Intended Use: See notice at 77 FR 23660, April... device detectors. Docket Number: 12-017. Applicant: Argonne National Laboratory, Lemont, IL 60439...

Supercontinuum Fourier transform spectrometry with balanced detection on a single photodiode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goncharov, Vasily; Hall, Gregory

Here, we have developed phase-sensitive signal detection and processing algorithms for Fourier transform spectrometers fitted with supercontinuum sources for applications requiring ultimate sensitivity. Similar to well-established approach of source noise cancellation through balanced detection of monochromatic light, our method is capable of reducing the relative intensity noise of polychromatic light by 40 dB. Unlike conventional balanced detection, which relies on differential absorption measured with a well matched pair of photo-detectors, our algorithm utilizes phase-sensitive differential detection on a single photodiode and is capable of the real-time correction for instabilities in supercontinuum spectral structure over a broad range of wavelengths. Inmore » the resulting method is universal in terms of applicable wavelengths and compatible with commercial spectrometers. We present a proof-of-principle experimental« less

Supercontinuum Fourier transform spectrometry with balanced detection on a single photodiode

DOE PAGES

Goncharov, Vasily; Hall, Gregory

2016-08-25

Here, we have developed phase-sensitive signal detection and processing algorithms for Fourier transform spectrometers fitted with supercontinuum sources for applications requiring ultimate sensitivity. Similar to well-established approach of source noise cancellation through balanced detection of monochromatic light, our method is capable of reducing the relative intensity noise of polychromatic light by 40 dB. Unlike conventional balanced detection, which relies on differential absorption measured with a well matched pair of photo-detectors, our algorithm utilizes phase-sensitive differential detection on a single photodiode and is capable of the real-time correction for instabilities in supercontinuum spectral structure over a broad range of wavelengths. Inmore » the resulting method is universal in terms of applicable wavelengths and compatible with commercial spectrometers. We present a proof-of-principle experimental« less

A universal, accurate intensity-based classification of different physical activities using raw data of accelerometer.

PubMed

Vähä-Ypyä, Henri; Vasankari, Tommi; Husu, Pauliina; Suni, Jaana; Sievänen, Harri

2015-01-01

Accelerometers are increasingly used for objective assessment of physical activity. However, because of lack of the proprietary analysis algorithms, direct comparisons between accelerometer brands are difficult. In this study, we propose and evaluate open source methods for commensurate assessment of raw accelerometer data irrespective of the brand. Twenty-one participants carried simultaneously three different tri-axial accelerometers on their waist during five different sedentary activities and five different intensity levels of bipedal movement from slow walking to running. Several time and frequency domain traits were calculated from the measured raw data, and their performance in classifying the activities was compared. Of the several traits, the mean amplitude deviation (MAD) provided consistently the best performance in separating the sedentary activities and different speeds of bipedal movement from each other. Most importantly, the universal cut-off limits based on MAD classified sedentary activities and different intensity levels of walking and running equally well for all three accelerometer brands and reached at least 97% sensitivity and specificity in each case. Irrespective of the accelerometer brand, a simply calculable MAD with universal cut-off limits provides a universal method to evaluate physical activity and sedentary behaviour using raw accelerometer data. A broader application of the present approach is expected to render different accelerometer studies directly comparable with each other. © 2014 Scandinavian Society of Clinical Physiology and Nuclear Medicine. Published by John Wiley & Sons Ltd.

End State: The Fallacy of Modern Military Planning

DTIC Science & Technology

2017-04-06

operational planning for non -linear, complex scenarios requires application of non -linear, advanced planning techniques such as design methodology ...cannot be approached in a linear, mechanistic manner by a universal planning methodology . Theater/global campaign plans and theater strategies offer no...strategic environments, and instead prescribes a universal linear methodology that pays no mind to strategic complexity. This universal application

76 FR 48130 - Southern Illinois University, et al.; Notice of Decision on Applications for Duty-Free Entry of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-08

... Number: 11-032. Applicant: Southern Illinois University, Integrated Microscopy and Graphic Expertise (IMAGE) Center, 750 Communications Drive--Mailcode 4402, Carbondale, IL 62901. Instrument: Quanta 450...

Coupling a universal DNA circuit with graphene sheets/polyaniline/AuNPs nanocomposites for the detection of BCR/ABL fusion gene.

PubMed

Chen, Xueping; Wang, Li; Sheng, Shangchun; Wang, Teng; Yang, Juan; Xie, Guoming; Feng, Wenli

2015-08-19

This article described a novel method by coupling a universal DNA circuit with graphene sheets/polyaniline/AuNPs nanocomposites (GS/PANI/AuNPs) for highly sensitive and specific detection of BCR/ABL fusion gene (bcr/abl) in chronic myeloid leukemia (CML). DNA circuit known as catalyzed hairpin assembly (CHA) is enzyme-free and can be simply operated to achieve exponential amplification, which has been widely employed in biosensing. However, application of CHA has been hindered by the need of specially redesigned sequences for each single-stranded DNA input. Herein, a transducer hairpin (HP) was designed to obtain a universal DNA circuit with favorable signal-to-background ratio. To further improve signal amplification, GS/PANI/AuNPs with excellent conductivity and enlarged effective area were introduced into this DNA circuit. Consequently, by combining the advantages of CHA and GS/PANI/AuNPs, bcr/abl could be detected in a linear range from 10 pM to 20 nM with a detection limit of 1.05 pM. Moreover, this protocol showed excellent specificity, good stability and was successfully applied for the detection of real sample, which demonstrated its great potential in clinical application. Copyright © 2015 Elsevier B.V. All rights reserved.

Hyperspectral Image Classification via Multitask Joint Sparse Representation and Stepwise MRF Optimization.

PubMed

Yuan, Yuan; Lin, Jianzhe; Wang, Qi

2016-12-01

Hyperspectral image (HSI) classification is a crucial issue in remote sensing. Accurate classification benefits a large number of applications such as land use analysis and marine resource utilization. But high data correlation brings difficulty to reliable classification, especially for HSI with abundant spectral information. Furthermore, the traditional methods often fail to well consider the spatial coherency of HSI that also limits the classification performance. To address these inherent obstacles, a novel spectral-spatial classification scheme is proposed in this paper. The proposed method mainly focuses on multitask joint sparse representation (MJSR) and a stepwise Markov random filed framework, which are claimed to be two main contributions in this procedure. First, the MJSR not only reduces the spectral redundancy, but also retains necessary correlation in spectral field during classification. Second, the stepwise optimization further explores the spatial correlation that significantly enhances the classification accuracy and robustness. As far as several universal quality evaluation indexes are concerned, the experimental results on Indian Pines and Pavia University demonstrate the superiority of our method compared with the state-of-the-art competitors.

Development of the M. D. Anderson Cancer Center Gynecologic Applicators for the Treatment of Cervical Cancer: Historical Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yordy, John S., E-mail: john.yordy@utsouthwestern.edu; Almond, Peter R.; Delclos, Luis

Purpose: To provide historical background on the development and initial studies of the gynecological (gyn) applicators developed by Dr. Gilbert H. Fletcher, a radiation oncologist and chairperson from 1948 to 1981 of the department at the M.D. Anderson Hospital (MDAH) for Cancer Research in Houston, TX, and to acknowledge the previously unrecognized contribution that Dr. Leonard G. Grimmett, a radiation physicist and chairperson from 1949 to 1951 of the physics department at MDAH, made to the development of the gynecological applicators. Methods and Materials: We reviewed archival materials from the Historical Resource Center and from the Department of Radiation Physicsmore » at University of Texas M. D. Anderson Cancer Center, as well as contemporary published papers, to trace the history of the applicators. Conclusions: Dr. Fletcher's work was influenced by the work on gynecologic applicators in the 1940s in Europe, especially work done at the Royal Cancer Hospital in London. Those efforts influenced not only Dr. Fletcher's approach to the design of the applicators but also the methods used to perform in vivo measurements and determine the dose distribution. Much of the initial development of the dosimetry techniques and measurements at MDAH were carried out by Dr. Grimmett.« less

Technology of an adhesive silicone film as drug carrier in transdermal therapy. I: Analytical methods used for characterization and design of the universal elastomer layers.

PubMed

Mojsiewicz-Pieńkowska, Krystyna; Jamrógiewicz, Marzena; Zebrowska, Maria; Sznitowska, Małgorzata; Centkowska, Katarzyna

2011-08-25

Silicone polymers possess unique properties, which make them suitable for many different applications, for example in the pharmaceutical and medical industry. To create an adhesive silicone film, the appropriate silicone components have to be chosen first. From these components two layers were made: an adhesive elastomer applied on the skin, and a non-adhesive elastomer on the other side of the film. The aim of this study was to identify a set of analytical methods that can be used for detailed characterization of the elastomer layers, as needed when designing new silicone films. More specifically, the following methods were combined to detailed identification of the silicone components: Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR) and size exclusion chromatography with evaporative light scattering detector (SEC-ELSD). It was demonstrated that these methods together with a rheological analysis are suitable for controlling the cross-linking reaction, thus obtaining the desired properties of the silicone film. Adhesive silicone films can be used as universal materials for medical use, particularly for effective treatment of scars and keloids or as drug carriers in transdermal therapy.

Recent Advances and Emerging Applications in Text and Data Mining for Biomedical Discovery.

PubMed

Gonzalez, Graciela H; Tahsin, Tasnia; Goodale, Britton C; Greene, Anna C; Greene, Casey S

2016-01-01

Precision medicine will revolutionize the way we treat and prevent disease. A major barrier to the implementation of precision medicine that clinicians and translational scientists face is understanding the underlying mechanisms of disease. We are starting to address this challenge through automatic approaches for information extraction, representation and analysis. Recent advances in text and data mining have been applied to a broad spectrum of key biomedical questions in genomics, pharmacogenomics and other fields. We present an overview of the fundamental methods for text and data mining, as well as recent advances and emerging applications toward precision medicine. © The Author 2015. Published by Oxford University Press.

Aeronautic Instruments. Section VI : Aerial Navigation and Navigating Instruments

NASA Technical Reports Server (NTRS)

Eaton, H N

1923-01-01

This report outlines briefly the methods of aerial navigation which have been developed during the past few years, with a description of the different instruments used. Dead reckoning, the most universal method of aerial navigation, is first discussed. Then follows an outline of the principles of navigation by astronomical observation; a discussion of the practical use of natural horizons, such as sea, land, and cloud, in making extant observations; the use of artificial horizons, including the bubble, pendulum, and gyroscopic types. A description is given of the recent development of the radio direction finder and its application to navigation.

Nondestructive evaluation of the preservation state of stone columns in the Hospital Real of Granada

NASA Astrophysics Data System (ADS)

Moreno de Jong van Coevorden, C.; Cobos Sánchez, C.; Rubio Bretones, A.; Fernández Pantoja, M.; García, Salvador G.; Gómez Martín, R.

2012-12-01

This paper describes the results of the employment of two nondestructive evaluation methods for the diagnostic of the preservation state of stone elements. The first method is based on ultrasonic (US) pulses while the second method uses short electromagnetic pulses. Specifically, these methods were applied to some columns, some of them previously restored. These columns are part of the architectonic heritage of the University of Granada, in particular they are located at the patio de la capilla del Hospital Real of Granada. The objective of this work was the application of systems based on US pulses (in transmission mode) and the ground-penetrating radar systems (electromagnetic tomography) in the diagnosis and detection of possible faults in the interior of columns.

Identification and Evaluation of Underground Obstacle Sensor Embodiments for Their Applicability to the Combat Engineers’ Rapid Excavation Mission(s),

DTIC Science & Technology

1980-01-01

November 1976. 11. Ohio State University, Electroscience Laboratory, Electromagnetic Pulse Sounding for Geological Surveying with Application in Rock...Peters, L. and Moffatt, D. L., Electromagnetic Pulse Sounding for Geological Surveying with Application in Rock Mechanics and Rapid Excavation... Electromagnetic Pulse Sounding for Geolog- ical Surveying with Application in Rock Mechanics and Rapid Excava- tion Program, Ohio State University, Report

Pre-analytical conditions in non-invasive prenatal testing of cell-free fetal RHD.

PubMed

Clausen, Frederik Banch; Jakobsen, Tanja Roien; Rieneck, Klaus; Krog, Grethe Risum; Nielsen, Leif Kofoed; Tabor, Ann; Dziegiel, Morten Hanefeld

2013-01-01

Non-invasive prenatal testing of cell-free fetal DNA (cffDNA) in maternal plasma can predict the fetal RhD type in D negative pregnant women. In Denmark, routine antenatal screening for the fetal RhD gene (RHD) directs the administration of antenatal anti-D prophylaxis only to women who carry an RhD positive fetus. Prophylaxis reduces the risk of immunization that may lead to hemolytic disease of the fetus and the newborn. The reliability of predicting the fetal RhD type depends on pre-analytical factors and assay sensitivity. We evaluated the testing setup in the Capital Region of Denmark, based on data from routine antenatal RHD screening. Blood samples were drawn at gestational age 25 weeks. DNA extracted from 1 mL of plasma was analyzed for fetal RHD using a duplex method for exon 7/10. We investigated the effect of blood sample transportation time (n = 110) and ambient outdoor temperatures (n = 1539) on the levels of cffDNA and total DNA. We compared two different quantification methods, the delta Ct method and a universal standard curve. PCR pipetting was compared on two systems (n = 104). The cffDNA level was unaffected by blood sample transportation for up to 9 days and by ambient outdoor temperatures ranging from -10 °C to 28 °C during transport. The universal standard curve was applicable for cffDNA quantification. Identical levels of cffDNA were observed using the two automated PCR pipetting systems. We detected a mean of 100 fetal DNA copies/mL at a median gestational age of 25 weeks (range 10-39, n = 1317). The setup for real-time PCR-based, non-invasive prenatal testing of cffDNA in the Capital Region of Denmark is very robust. Our findings regarding the transportation of blood samples demonstrate the high stability of cffDNA. The applicability of a universal standard curve facilitates easy cffDNA quantification.

A study on the measurement of wrist motion range using the iPhone 4 gyroscope application.

PubMed

Kim, Tae Seob; Park, David Dae Hwan; Lee, Young Bae; Han, Dong Gil; Shim, Jeong Su; Lee, Young Jig; Kim, Peter Chan Woo

2014-08-01

Measuring the range of motion (ROM) of the wrist is an important physical examination conducted in the Department of Hand Surgery for the purpose of evaluation, diagnosis, prognosis, and treatment of patients. The most common method for performing this task is by using a universal goniometer. This study was performed using 52 healthy participants to compare wrist ROM measurement using a universal goniometer and the iPhone 4 Gyroscope application. Participants did not have previous wrist illnesses and their measured values for wrist motion were compared in each direction. Normal values for wrist ROM are 73 degrees of flexion, 71 degrees of extension, 19 degrees of radial deviation, 33 degrees of ulnar deviation, 140 degrees of supination, and 60 degrees of pronation.The average measurement values obtained using the goniometer were 74.2 (5.1) degrees for flexion, 71.1 (4.9) degrees for extension, 19.7 (3.0) degrees for radial deviation, 34.0 (3.7) degrees for ulnar deviation, 140.8 (5.6) degrees for supination, and 61.1 (4.7) degrees for pronation. The average measurement values obtained using the iPhone 4 Gyroscope application were 73.7 (5.5) degrees for flexion, 70.8 (5.1) degrees for extension, 19.5 (3.0) degrees for radial deviation, 33.7 (3.9) degrees for ulnar deviation, 140.4 (5.7) degrees for supination, and 60.8 (4.9) degrees for pronation. The differences between the measurement values by the Gyroscope application and average value were 0.7 degrees for flexion, -0.2 degrees for extension, 0.5 degrees for radial deviation, 0.7 degrees for ulnar deviation, 0.4 degrees for supination, and 0.8 degrees for pronation. The differences in average value were not statistically significant. The authors introduced a new method of measuring the range of wrist motion using the iPhone 4 Gyroscope application that is simpler to use and can be performed by the patient outside a clinical setting.

Double power series method for approximating cosmological perturbations

NASA Astrophysics Data System (ADS)

Wren, Andrew J.; Malik, Karim A.

2017-04-01

We introduce a double power series method for finding approximate analytical solutions for systems of differential equations commonly found in cosmological perturbation theory. The method was set out, in a noncosmological context, by Feshchenko, Shkil' and Nikolenko (FSN) in 1966, and is applicable to cases where perturbations are on subhorizon scales. The FSN method is essentially an extension of the well known Wentzel-Kramers-Brillouin (WKB) method for finding approximate analytical solutions for ordinary differential equations. The FSN method we use is applicable well beyond perturbation theory to solve systems of ordinary differential equations, linear in the derivatives, that also depend on a small parameter, which here we take to be related to the inverse wave-number. We use the FSN method to find new approximate oscillating solutions in linear order cosmological perturbation theory for a flat radiation-matter universe. Together with this model's well-known growing and decaying Mészáros solutions, these oscillating modes provide a complete set of subhorizon approximations for the metric potential, radiation and matter perturbations. Comparison with numerical solutions of the perturbation equations shows that our approximations can be made accurate to within a typical error of 1%, or better. We also set out a heuristic method for error estimation. A Mathematica notebook which implements the double power series method is made available online.

Magnetic resonance imaging criteria for thrombolysis in hyperacute cerebral infarction.

PubMed

Ahmetgjekaj, Ilir; Kabashi-Muçaj, Serbeze; Lascu, Luana Corina; Kabashi, Antigona; Bondari, A; Bondari, Simona; Dedushi-Hoti, Kreshnike; Biçaku, Ardian; Shatri, Jeton

2014-01-01

Selection of patients with cerebral infarction for MRI that is suitable for thrombolytic therapy as an emerging application. Although the efficiency of the therapy with i.v. tissue plasminogen activator (tPA) within 3 hours after onset of symptoms has been proven in selected patients with CT, now these criteria are determined by MRI, as the data we gather are fast and accurate in the first hours. MRI screening in patients with acute cerebral infarction before application of thrombolytic therapy was done in a UCC Mannheim in Germany. Unlike trials with CT, MRI studies demonstrated the benefits of therapy up to 6 hours after the onset of symptoms. We studied 21 patients hospitalized in Clinic of Neuroradiology at University Clinical Centre in Mannheim-Germany. They all undergo brain MRI evaluation for stroke. This article reviews literature that has followed application of thrombolysis in patients with cerebral infarction based on MRI. We have analyzed the MRI criteria for i.v. application of tPA at this University Centre. Alongside the personal viewpoints of clinicians, survey reveals a variety of clinical aspects and MRI features that are opened for further more exploration: therapeutic effects, the use of the MRI angiography, dynamics, and other. MRI is a tested imaging method for rapid evaluation of patients with hyperacute cerebral infarction, replacing the use of CT imaging and clinical features. MRI criteria for thrombolytic therapy are being applied in some cerebral vascular centres. In Kosovo, the application of thrombolytic therapy has not started yet.

University Applicants' Critical Thinking Skills: The Case of the Finnish Educational Sciences

ERIC Educational Resources Information Center

Utriainen, Jukka; Marttunen, Miika; Kallio, Eeva; Tynjälä, Päivi

2017-01-01

This study investigates the quality of the critical thinking skills of applicants (n = 77) seeking entry to the faculty of educational sciences in a Finnish university and how these skills are associated with the applicant's age, previous higher education experience, and matriculation and entrance examination scores. The data consist of the…

Assessing the Purpose and Importance University Students Attribute to Current ICT Applications

ERIC Educational Resources Information Center

DiGiuseppe, Maurice; Partosoedarso, Elita

2014-01-01

In this study we surveyed students in a mid-sized university in Ontario, Canada to explore various aspects associated with their use of computer-based applications. For the purpose of analysis, the computer applications under study were categorized according to the Human-Computer-Human Interaction (HCHI) model of Desjardins (2005) in which…

Solvent free chemical oxidative polymerization as a universal method for the synthesis of ultra high molecular weight conjugated polymers based on 3,4-propylenedioxythiophenes.

PubMed

Kumar, Anshu; Singh, Rekha; Gopinathan, Sreelekha P; Kumar, Anil

2012-05-18

In this communication, we report on a solvent free chemical oxidative polymerization route for the monomers based on 3,4-propylenedioxythiophenes wherein the process is applicable to both solid as well as liquid monomers and results in the bulk synthesis of ultra high molecular weight polymers. This journal is © The Royal Society of Chemistry 2012

Optimization of the double dosimetry algorithm for interventional cardiologists

NASA Astrophysics Data System (ADS)

Chumak, Vadim; Morgun, Artem; Bakhanova, Elena; Voloskiy, Vitalii; Borodynchik, Elena

2014-11-01

A double dosimetry method is recommended in interventional cardiology (IC) to assess occupational exposure; yet currently there is no common and universal algorithm for effective dose estimation. In this work, flexible and adaptive algorithm building methodology was developed and some specific algorithm applicable for typical irradiation conditions of IC procedures was obtained. It was shown that the obtained algorithm agrees well with experimental measurements and is less conservative compared to other known algorithms.

Nastran's Application in Agricultural Engineering

NASA Technical Reports Server (NTRS)

Vanwicklen, G. L.

1985-01-01

Finite element analysis has been recognized as a valuable solution method by agricultural engineers. NASTRAN has been obtained by the Agricultural Engineering Department at the University of Georgia. The NASTRAN Thermal Analyzer has been used in the teaching program for an undergraduate course in heat transfer and will be used for a new graduate course in finite element analysis. The NASTRAN Thermal Analyzer has also been applied to several research problems in the Agricultural Engineering Department.

Application of the Simplified Dow Chemical Company Relative Ranking Hazard Assessment Method for Air Combat Command Bases

DTIC Science & Technology

1993-09-01

Chiras , Daniel D. Environmental Science . Redwood City, California: The Benjamin/Cummings Publishing Company, Inc., 1991. Cummings-Saxton, J., L...Engineering of the Air Force Institute of Technology Air University In Partial Fulfillment of the Requirements for the Degree of Master of Science in...Engineering and Environmental Management Raymond A. Sable, B. Architecture Captain, USAF, R.A. September 1993 Approved for public release; distribution

Discrimination in a General Algebraic Setting

PubMed Central

Fine, Benjamin; Lipschutz, Seymour; Spellman, Dennis

2015-01-01

Discriminating groups were introduced by G. Baumslag, A. Myasnikov, and V. Remeslennikov as an outgrowth of their theory of algebraic geometry over groups. Algebraic geometry over groups became the main method of attack on the solution of the celebrated Tarski conjectures. In this paper we explore the notion of discrimination in a general universal algebra context. As an application we provide a different proof of a theorem of Malcev on axiomatic classes of Ω-algebras. PMID:26171421

Examining the Effects of a Behavioural Self-Control Package on the Behaviour of the Distance Learner. REDEAL Research Report #8. Project REDEAL. Research and Evaluation of Distance Education for the Adult Learner.

ERIC Educational Resources Information Center

Powell, Russell; Coldeway, Dan O.

An unsuccessful attempt was made to facilitate study behavior of Athabasca University learners through instruction in behavioral methods of self-control. The general procedure consisted of providing each student with a package containing instructions and materials for the self-application of the strategies of self-monitoring and standard setting.…

Viscoelastic Properties of Advanced Polymer Composites for Ballistic Protective Applications

DTIC Science & Technology

1994-09-01

ofthe Damaged Sample 78 Figure 69: Fracture Surface of Damage Area Near the Point of Penetration 79 Figure 70. Closer View ofthe Damaged Area...LIST OF TABLES Table 1. Basic Mechanical Properties of the Materials 6 Table 2. Initial DMA Test Results 23 Table 3. Flexural Three Point Bend... point bend testing was conducted using an Instron 1127 Universal Tester to verify the DMA test method and specimen clamping configuration. Interfacial

Use of the electro-separation method for improvement of the utility value of winter rapeseeds

NASA Astrophysics Data System (ADS)

Kovalyshyn, S. J.; Shvets, O. P.; Grundas, S.; Tys, J.

2013-12-01

The paper presents the results of a study of the use of electro-separation methods for improvement of the utility value of 5 winter rapeseed cultivars. The process of electro-separation of rapeseed was conducted on a prototype apparatus built at the Laboratory of Application of Electro-technologies in Agriculture, Lviv National Agriculture University. The process facilitated separation of damaged, low quality seeds from the sowing material. The initial mean level of mechanically damaged seeds in the winter rapeseed cultivars studied varied within the range of 15.8-20.1%. Verification of the amount of seeds with mechanical damage was performed on X-ray images of seeds acquired by means of a digital X-ray apparatus. In the course of analysis of the X-ray images, it was noted that the mean level of mechanical damage to the seeds after the electro-separation was in the range of 2.1-3.8%. The application of the method of separation of rapeseeds in the corona discharge field yielded a significant reduction of the level of seeds with mechanical damage. The application of the method in practice may effectively contribute to improvement of the utility value of sowing material or seed material for production of edible oil.

Calibration of the modulation transfer function of surface profilometers with binary pseudo-random test standards: expanding the application range

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yashchuk, Valeriy V.; Anderson, Erik H.; Barber, Samuel K.

2011-03-14

A modulation transfer function (MTF) calibration method based on binary pseudo-random (BPR) gratings and arrays [Proc. SPIE 7077-7 (2007), Opt. Eng. 47, 073602 (2008)] has been proven to be an effective MTF calibration method for a number of interferometric microscopes and a scatterometer [Nucl. Instr. and Meth. A616, 172 (2010)]. Here we report on a further expansion of the application range of the method. We describe the MTF calibration of a 6 inch phase shifting Fizeau interferometer. Beyond providing a direct measurement of the interferometer's MTF, tests with a BPR array surface have revealed an asymmetry in the instrument's datamore » processing algorithm that fundamentally limits its bandwidth. Moreover, the tests have illustrated the effects of the instrument's detrending and filtering procedures on power spectral density measurements. The details of the development of a BPR test sample suitable for calibration of scanning and transmission electron microscopes are also presented. Such a test sample is realized as a multilayer structure with the layer thicknesses of two materials corresponding to BPR sequence. The investigations confirm the universal character of the method that makes it applicable to a large variety of metrology instrumentation with spatial wavelength bandwidths from a few nanometers to hundreds of millimeters.« less

Calibration of NMR well logs from carbonate reservoirs with laboratory NMR measurements and μXRCT

DOE PAGES

Mason, Harris E.; Smith, Megan M.; Hao, Yue; ...

2014-12-31

The use of nuclear magnetic resonance (NMR) well log data has the potential to provide in-situ porosity, pore size distributions, and permeability of target carbonate CO₂ storage reservoirs. However, these methods which have been successfully applied to sandstones have yet to be completely validated for carbonate reservoirs. Here, we have taken an approach to validate NMR measurements of carbonate rock cores with independent measurements of permeability and pore surface area to volume (S/V) distributions using differential pressure measurements and micro X-ray computed tomography (μXRCT) imaging methods, respectively. We observe that using standard methods for determining permeability from NMR data incorrectlymore » predicts these values by orders of magnitude. However, we do observe promise that NMR measurements provide reasonable estimates of pore S/V distributions, and with further independent measurements of the carbonate rock properties that universally applicable relationships between NMR measured properties may be developed for in-situ well logging applications of carbonate reservoirs.« less

Calibration of NMR well logs from carbonate reservoirs with laboratory NMR measurements and μXRCT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mason, Harris E.; Smith, Megan M.; Hao, Yue

The use of nuclear magnetic resonance (NMR) well log data has the potential to provide in-situ porosity, pore size distributions, and permeability of target carbonate CO₂ storage reservoirs. However, these methods which have been successfully applied to sandstones have yet to be completely validated for carbonate reservoirs. Here, we have taken an approach to validate NMR measurements of carbonate rock cores with independent measurements of permeability and pore surface area to volume (S/V) distributions using differential pressure measurements and micro X-ray computed tomography (μXRCT) imaging methods, respectively. We observe that using standard methods for determining permeability from NMR data incorrectlymore » predicts these values by orders of magnitude. However, we do observe promise that NMR measurements provide reasonable estimates of pore S/V distributions, and with further independent measurements of the carbonate rock properties that universally applicable relationships between NMR measured properties may be developed for in-situ well logging applications of carbonate reservoirs.« less

Astronomical Context of Georgian Folklore

NASA Astrophysics Data System (ADS)

Jijelava1, Badri; Holbrook, Jarita; Simonia, Irakli

2016-10-01

Objectives: The religious Ancient megalithic monuments are accordingly o/riente to the ancient Gods - The Sun, Moon, luminaries. The aim of this work to research the ethnographic data, current folklore and based on the results, harmonize the ancient Gods and the orientations of the religious megalithic complexes. Methods/Statistical Analysis: We harmonized the ethnographical, folklore and historical information and restoration of ancient celestial sphere (using special astronomy application) and identified the correlations between the some acronychal or helical rising/set of luminaries and orientations of megalithic objects. Such connections are stored in a folklore. Findings: This technique of investigations gives us more clear understanding of ancient universe. Using this method, we can receive additional information about the ancient Gods - Luminaries, clarify current mythology, date the megalithic complex. Application/Improvements: This method of investigation - Harmonization cultural astronomy and archae or astronomy with the archeological investigations will be more fruitful, because it gives us reliable information concerning the ancient culture, ancient religion and ancient people.

Multi-level Monte Carlo Methods for Efficient Simulation of Coulomb Collisions

NASA Astrophysics Data System (ADS)

Ricketson, Lee

2013-10-01

We discuss the use of multi-level Monte Carlo (MLMC) schemes--originally introduced by Giles for financial applications--for the efficient simulation of Coulomb collisions in the Fokker-Planck limit. The scheme is based on a Langevin treatment of collisions, and reduces the computational cost of achieving a RMS error scaling as ɛ from O (ɛ-3) --for standard Langevin methods and binary collision algorithms--to the theoretically optimal scaling O (ɛ-2) for the Milstein discretization, and to O (ɛ-2 (logɛ)2) with the simpler Euler-Maruyama discretization. In practice, this speeds up simulation by factors up to 100. We summarize standard MLMC schemes, describe some tricks for achieving the optimal scaling, present results from a test problem, and discuss the method's range of applicability. This work was performed under the auspices of the U.S. DOE by the University of California, Los Angeles, under grant DE-FG02-05ER25710, and by LLNL under contract DE-AC52-07NA27344.

Influence of Conditioning Time of Universal Adhesives on Adhesive Properties and Enamel-Etching Pattern.

PubMed

Cardenas, A M; Siqueira, F; Rocha, J; Szesz, A L; Anwar, M; El-Askary, F; Reis, A; Loguercio, A

2016-01-01

To evaluate the effect of application protocol in resin-enamel microshear bond strength (μSBS), in situ degree of conversion, and etching pattern of three universal adhesive systems. Sixty-three extracted third molars were sectioned in four parts (buccal, lingual, and proximals) and divided into nine groups, according to the combination of the main factors-Adhesive (Clearfil Universal, Kuraray Noritake Dental Inc, Tokyo, Japan; Futurabond U, VOCO, Cuxhaven, Germany; and Scotchbond Universal Adhesive, 3M ESPE, St Paul, MN, USA)-and enamel treatment/application time (etch-and-rinse mode [ER], self-etch [SE] application for 20 seconds [SE20], and SE application for 40 seconds [SE40]). Specimens were stored in water (37°C/24 h) and tested at 1.0 mm/min (μSBS). The degree of conversion of the adhesives at the resin-enamel interfaces was evaluated using micro-Raman spectroscopy. The enamel-etching pattern was evaluated under a scanning electron microscope. Data were analyzed with two-way analysis of variance and Tukey test (α=0.05). In general, the application of the universal adhesives in the SE40 produced μSBS and degree of conversion that were higher than in the SE20 (p<0.01) and similar to the ER mode. The deepest enamel-etching pattern was obtained in the ER mode, followed by the SE40. The active and prolonged application of universal adhesives in the SE mode may be a viable alternative to increase the degree of conversion, etching pattern, and resin-enamel bond strength.

[The thesis of the university nursing diploma. Experience at the University of Padova, Italy].

PubMed

Costantino, V; Perissinotto, E; Marchesin, R; Vian, F

1999-01-01

The new didactic organization of University degree of health areas considers a final qualifying examination composed, among other exams, by a written dissertation (thesis) dealing with technical-operative-experimental matters. At the faculty of Medicine and Surgery of Padua University, the council of the Degree in Nursing proposed a document about finalities, arguments, methods and operative rules for the production of the thesis as an instrument for students and teachers. During academic year 1996/97, 49 students had been graduated, for the first time in Italy. About 63% of theses were highly congruent with council's methodological instructions. When the matter of the theses was a technical aspect of an assistance problem, the theses were correct from a methodological point of view. Many professional figures supplied support to the students for the thesis, giving them a complete experience of professional application. The dimension of the thesis suggested by the Council's instruction was unrespected, the average length of the theses (30.3 pages) was significantly (p < 0.01) higher than that proposed (20 pages). This suggests that students could have an insufficient synthetic capability.

Mass Function of Galaxy Clusters in Relativistic Inhomogeneous Cosmology

NASA Astrophysics Data System (ADS)

Ostrowski, Jan J.; Buchert, Thomas; Roukema, Boudewijn F.

The current cosmological model (ΛCDM) with the underlying FLRW metric relies on the assumption of local isotropy, hence homogeneity of the Universe. Difficulties arise when one attempts to justify this model as an average description of the Universe from first principles of general relativity, since in general, the Einstein tensor built from the averaged metric is not equal to the averaged stress-energy tensor. In this context, the discrepancy between these quantities is called "cosmological backreaction" and has been the subject of scientific debate among cosmologists and relativists for more than 20 years. Here we present one of the methods to tackle this problem, i.e. averaging the scalar parts of the Einstein equations, together with its application, the cosmological mass function of galaxy clusters.

Genetic Diversity Analysis of Medicinally Important Horticultural Crop Aegle marmelos by ISSR Markers.

PubMed

Mujeeb, Farina; Bajpai, Preeti; Pathak, Neelam; Verma, Smita Rastogi

2017-01-01

Inter simple sequence repeat (ISSR) markers help in identifying and determining the extent of genetic diversity in cultivars. Here, we describe their application in determining the genetic diversity of bael (Aegle marmelos Corr.). Universal ISSR primers are selected and their marker characteristics such as polymorphism information content, effective multiplex ratio and marker index have been evaluated. ISSR-PCR is then performed using universal ISSR primers to generate polymorphic bands. This information is used to determine the degree of genetic similarity among the bael varieties/accessions by cluster analysis using unweighted pair-group method with arithmetic averages (UPGMA). This technology is valuable for biodiversity conservation and for making an efficient choice of parents in breeding programs.

Balancing Bologna: opportunities for university teaching that integrates academic and practical learning outcomes

NASA Astrophysics Data System (ADS)

Probst, Lorenz; Pflug, Verena; Brandenburg, Christiane; Guggenberger, Thomas; Mentler, Axel; Wurzinger, Maria

2014-05-01

In the course of the Bologna Process, the quality of university teaching has become more prominent in the discourse on higher education. More attention is now paid to didactics and methods and learner-oriented modes of teaching are introduced. The application of knowledge, practical skills and in consequence the employability of university graduates have become requirements for university teaching. Yet, the lecture-style approach still dominates European universities, although empirical evidence confirms that student-centred, interdisciplinary and experiential learning is more effective. Referring to the learning taxonomy introduced by Bloom, we argue that standard approaches rarely move beyond the learning level of comprehension and fail to reach the levels of application, analysis, synthesis and evaluation. Considering the rapid changes and multiple challenges society faces today, responsible practitioners and scientists who can improve the current management of natural resources are urgently needed. Universities are expected to equip their graduates with the necessary skills to reflect and evaluate their actions when addressing 'real world' problems in order to improve impact and relevance of their work. Higher education thus faces the challenge of providing multi-level learning opportunities for students with diverse practical and theoretical learning needs. In this study, we reflect on three cases of university teaching attempting to bridge theory and practice and based on the principles of systemic, problem based learning. The described courses focus on organic farming, rural development and landscape planning and take place in Uganda, Nicaragua and Italy. We show that being part of a real-world community of stakeholders requires hands-on learning and the reflection and evaluation of actions. This prepares students in a more effective and realistic way for their future roles as responsible decision makers in complex social, economic and ecological systems. We thus conclude that in order (1) to meet the goals of the Bologna process; and (2) to bridge the gap between theory and practice in higher education, university teaching needs to radically reconsider its standard forms of teaching. We propose a fundamental shift towards action learning in real-world settings, empowering students to become responsible actors.

A Universal Method for Species Identification of Mammals Utilizing Next Generation Sequencing for the Analysis of DNA Mixtures

PubMed Central

Tillmar, Andreas O.; Dell'Amico, Barbara; Welander, Jenny; Holmlund, Gunilla

2013-01-01

Species identification can be interesting in a wide range of areas, for example, in forensic applications, food monitoring and in archeology. The vast majority of existing DNA typing methods developed for species determination, mainly focuses on a single species source. There are, however, many instances where all species from mixed sources need to be determined, even when the species in minority constitutes less than 1 % of the sample. The introduction of next generation sequencing opens new possibilities for such challenging samples. In this study we present a universal deep sequencing method using 454 GS Junior sequencing of a target on the mitochondrial gene 16S rRNA. The method was designed through phylogenetic analyses of DNA reference sequences from more than 300 mammal species. Experiments were performed on artificial species-species mixture samples in order to verify the method’s robustness and its ability to detect all species within a mixture. The method was also tested on samples from authentic forensic casework. The results showed to be promising, discriminating over 99.9 % of mammal species and the ability to detect multiple donors within a mixture and also to detect minor components as low as 1 % of a mixed sample. PMID:24358309

On existence of the {sigma}(600) Its physical implications and related problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishida, Shin

1998-05-29

We make a re-analysis of 1=0 {pi}{pi} scattering phase shift {delta}{sub 0}{sup 0} through a new method of S-matrix parametrization (IA; interfering amplitude method), and show a result suggesting strongly for the existence of {sigma}-particle-long-sought Chiral partner of {pi}-meson. Furthermore, through the phenomenological analyses of typical production processes of the 2{pi}-system, the pp-central collision and the J/{psi}{yields}{omega}{pi}{pi} decay, by applying an intuitive formula as sum of Breit-Wigner amplitudes, (VMW; variant mass and width method), the other evidences for the {sigma}-existence are given. The validity of the methods used in the above analyses is investigated, using a simple field theoretical model,more » from the general viewpoint of unitarity and the applicability of final state interaction (FSI-) theorem, especially in relation to the ''universality'' argument. It is shown that the IA and VMW are obtained as the physical state representations of scattering and production amplitudes, respectively. The VMW is shown to be an effective method to obtain the resonance properties from production processes, which generally have the unknown strong-phases. The conventional analyses based on the 'universality' seem to be powerless for this purpose.« less

77 FR 58860 - Renewal of Agency Information Collection for Tribal Colleges and Universities Grant Application Form

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... information collection is currently authorized by OMB Control Number 1076-0018, which expires September 30.... Data OMB Control Number: 1076-0018. Title: Tribal Colleges and Universities Grant Application Form, 25...

Natural Isotope Abundance in Metabolites: Techniques and Kinetic Isotope Effect Measurement in Plant, Animal, and Human Tissues.

PubMed

Tea, Illa; Tcherkez, Guillaume

2017-01-01

The natural isotope abundance in bulk organic matter or tissues is not a sufficient base to investigate physiological properties, biosynthetic mechanisms, and nutrition sources of biological systems. In fact, isotope effects in metabolism lead to a heterogeneous distribution of 2 H, 18 O, 13 C, and 15 N isotopes in metabolites. Therefore, compound-specific isotopic analysis (CSIA) is crucial to biological and medical applications of stable isotopes. Here, we review methods to implement CSIA for 15 N and 13 C from plant, animal, and human samples and discuss technical solutions that have been used for the conversion to CO 2 and N 2 for IRMS analysis, derivatization and isotope effect measurements. It appears that despite the flexibility of instruments used for CSIA, there is no universal method simply because the chemical nature of metabolites of interest varies considerably. Also, CSIA methods are often limited by isotope effects in sample preparation or the addition of atoms from the derivatizing reagents, and this implies that corrections must be made to calculate a proper δ-value. Therefore, CSIA has an enormous potential for biomedical applications, but its utilization requires precautions for its successful application. © 2017 Elsevier Inc. All rights reserved.

Four chemical methods of porcelain conditioning and their influence over bond strength and surface integrity

PubMed Central

Stella, João Paulo Fragomeni; Oliveira, Andrea Becker; Nojima, Lincoln Issamu; Marquezan, Mariana

2015-01-01

OBJECTIVE: To assess four different chemical surface conditioning methods for ceramic material before bracket bonding, and their impact on shear bond strength and surface integrity at debonding. METHODS: Four experimental groups (n = 13) were set up according to the ceramic conditioning method: G1 = 37% phosphoric acid etching followed by silane application; G2 = 37% liquid phosphoric acid etching, no rinsing, followed by silane application; G3 = 10% hydrofluoric acid etching alone; and G4 = 10% hydrofluoric acid etching followed by silane application. After surface conditioning, metal brackets were bonded to porcelain by means of the Transbond XP system (3M Unitek). Samples were submitted to shear bond strength tests in a universal testing machine and the surfaces were later assessed with a microscope under 8 X magnification. ANOVA/Tukey tests were performed to establish the difference between groups (α= 5%). RESULTS: The highest shear bond strength values were found in groups G3 and G4 (22.01 ± 2.15 MPa and 22.83 ± 3.32 Mpa, respectively), followed by G1 (16.42 ± 3.61 MPa) and G2 (9.29 ± 1.95 MPa). As regards surface evaluation after bracket debonding, the use of liquid phosphoric acid followed by silane application (G2) produced the least damage to porcelain. When hydrofluoric acid and silane were applied, the risk of ceramic fracture increased. CONCLUSIONS: Acceptable levels of bond strength for clinical use were reached by all methods tested; however, liquid phosphoric acid etching followed by silane application (G2) resulted in the least damage to the ceramic surface. PMID:26352845

77 FR 27487 - License Amendment Request From The State University of New York, University of Buffalo Reactor...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

... State University of New York, University of Buffalo Reactor Facility AGENCY: Nuclear Regulatory... staff at 1-800-397-4209, 301-415- 4737, or by email to [email protected] . The University of Buffalo... license amendment application from the State University of New York, University of Buffalo requesting...

JUPITER: Joint Universal Parameter IdenTification and Evaluation of Reliability - An Application Programming Interface (API) for Model Analysis

USGS Publications Warehouse

Banta, Edward R.; Poeter, Eileen P.; Doherty, John E.; Hill, Mary C.

2006-01-01

he Joint Universal Parameter IdenTification and Evaluation of Reliability Application Programming Interface (JUPITER API) improves the computer programming resources available to those developing applications (computer programs) for model analysis.The JUPITER API consists of eleven Fortran-90 modules that provide for encapsulation of data and operations on that data. Each module contains one or more entities: data, data types, subroutines, functions, and generic interfaces. The modules do not constitute computer programs themselves; instead, they are used to construct computer programs. Such computer programs are called applications of the API. The API provides common modeling operations for use by a variety of computer applications.The models being analyzed are referred to here as process models, and may, for example, represent the physics, chemistry, and(or) biology of a field or laboratory system. Process models commonly are constructed using published models such as MODFLOW (Harbaugh et al., 2000; Harbaugh, 2005), MT3DMS (Zheng and Wang, 1996), HSPF (Bicknell et al., 1997), PRMS (Leavesley and Stannard, 1995), and many others. The process model may be accessed by a JUPITER API application as an external program, or it may be implemented as a subroutine within a JUPITER API application . In either case, execution of the model takes place in a framework designed by the application programmer. This framework can be designed to take advantage of any parallel processing capabilities possessed by the process model, as well as the parallel-processing capabilities of the JUPITER API.Model analyses for which the JUPITER API could be useful include, for example: Compare model results to observed values to determine how well the model reproduces system processes and characteristics.Use sensitivity analysis to determine the information provided by observations to parameters and predictions of interest.Determine the additional data needed to improve selected model predictions.Use calibration methods to modify parameter values and other aspects of the model.Compare predictions to regulatory limits.Quantify the uncertainty of predictions based on the results of one or many simulations using inferential or Monte Carlo methods.Determine how to manage the system to achieve stated objectives.The capabilities provided by the JUPITER API include, for example, communication with process models, parallel computations, compressed storage of matrices, and flexible input capabilities. The input capabilities use input blocks suitable for lists or arrays of data. The input blocks needed for one application can be included within one data file or distributed among many files. Data exchange between different JUPITER API applications or between applications and other programs is supported by data-exchange files.The JUPITER API has already been used to construct a number of applications. Three simple example applications are presented in this report. More complicated applications include the universal inverse code UCODE_2005 (Poeter et al., 2005), the multi-model analysis MMA (Eileen P. Poeter, Mary C. Hill, E.R. Banta, S.W. Mehl, and Steen Christensen, written commun., 2006), and a code named OPR_PPR (Matthew J. Tonkin, Claire R. Tiedeman, Mary C. Hill, and D. Matthew Ely, written communication, 2006).This report describes a set of underlying organizational concepts and complete specifics about the JUPITER API. While understanding the organizational concept presented is useful to understanding the modules, other organizational concepts can be used in applications constructed using the JUPITER API.

Repair bond strength of nanohybrid composite resins with a universal adhesive

PubMed Central

Altinci, Pinar; Mutluay, Murat; Tezvergil-Mutluay, Arzu

2018-01-01

Abstract Objective: To investigate the repair bond strength of fresh and aged nanohybrid and hybrid composite resins using a universal adhesive (UA). Materials and methods: Fresh and aged substrates were prepared using two nanohybrid (Venus Pearl, Heraus Kulzer; Filtek Supreme XTE, 3 M ESPE) and one hybrid (Z100, 3 M ESPE) composite resin, and randomly assigned to different surface treatments: (1) no treatment (control), (2) surface roughening with 320-grit (SR), (3) SR + UA (iBOND, Heraus Kulzer), (4) SR + Silane (Signum, Ceramic Bond I, Heraeus Kulzer) + UA, (5) SR + Sandblasting (CoJet, 3 M ESPE) + Silane + UA. After surface treatment, fresh composite resin was added to the substrates at 2 mm layer increments to a height of 5 mm, and light cured. Restored specimens were water-stored for 24 h and sectioned to obtain 1.0 × 1.0 mm beams (n = 12), and were either water-stored for 24 h at 37 °C, or water-stored for 24 h, and then thermocycled for 6000 cycles before microtensile bond strength (µTBS) testing. Data were analyzed with ANOVA and Tukey’s HSD tests (p = .05). Results: Combined treatment of SR, sandblasting, silane and UA provided repair bond strength values comparable to the cohesive strength of each tested resin material (p < .05). Thermocycling significantly reduced the cohesive strength of the composite resins upto 65% (p < .05). Repair bond strengths of UA-treated groups were more stable under thermocycling. Conclusions: Universal adhesive application is a reliable method for composite repair. Sandblasting and silane application slightly increases the repair strength for all substrate types. PMID:29250576

Repair bond strength of nanohybrid composite resins with a universal adhesive.

PubMed

Altinci, Pinar; Mutluay, Murat; Tezvergil-Mutluay, Arzu

2018-01-01

Objective: To investigate the repair bond strength of fresh and aged nanohybrid and hybrid composite resins using a universal adhesive (UA). Materials and methods: Fresh and aged substrates were prepared using two nanohybrid (Venus Pearl, Heraus Kulzer; Filtek Supreme XTE, 3 M ESPE) and one hybrid (Z100, 3 M ESPE) composite resin, and randomly assigned to different surface treatments: (1) no treatment (control), (2) surface roughening with 320-grit (SR), (3) SR + UA (iBOND, Heraus Kulzer), (4) SR + Silane (Signum, Ceramic Bond I, Heraeus Kulzer) + UA, (5) SR + Sandblasting (CoJet, 3 M ESPE) + Silane + UA. After surface treatment, fresh composite resin was added to the substrates at 2 mm layer increments to a height of 5 mm, and light cured. Restored specimens were water-stored for 24 h and sectioned to obtain 1.0 × 1.0 mm beams ( n  = 12), and were either water-stored for 24 h at 37 °C, or water-stored for 24 h, and then thermocycled for 6000 cycles before microtensile bond strength (µTBS) testing. Data were analyzed with ANOVA and Tukey's HSD tests ( p  = .05). Results: Combined treatment of SR, sandblasting, silane and UA provided repair bond strength values comparable to the cohesive strength of each tested resin material ( p  < .05). Thermocycling significantly reduced the cohesive strength of the composite resins upto 65% ( p  < .05). Repair bond strengths of UA-treated groups were more stable under thermocycling. Conclusions: Universal adhesive application is a reliable method for composite repair. Sandblasting and silane application slightly increases the repair strength for all substrate types.

Global GNSS processing based on the raw observation approach

NASA Astrophysics Data System (ADS)

Strasser, Sebastian; Zehentner, Norbert; Mayer-Gürr, Torsten

2017-04-01

Many global navigation satellite system (GNSS) applications, e.g. Precise Point Positioning (PPP), require high-quality GNSS products, such as precise GNSS satellite orbits and clocks. These products are routinely determined by analysis centers of the International GNSS Service (IGS). The current processing methods of the analysis centers make use of the ionosphere-free linear combination to reduce the ionospheric influence. Some of the analysis centers also form observation differences, in general double-differences, to eliminate several additional error sources. The raw observation approach is a new GNSS processing approach that was developed at Graz University of Technology for kinematic orbit determination of low Earth orbit (LEO) satellites and subsequently adapted to global GNSS processing in general. This new approach offers some benefits compared to well-established approaches, such as a straightforward incorporation of new observables due to the avoidance of observation differences and linear combinations. This becomes especially important in view of the changing GNSS landscape with two new systems, the European system Galileo and the Chinese system BeiDou, currently in deployment. GNSS products generated at Graz University of Technology using the raw observation approach currently comprise precise GNSS satellite orbits and clocks, station positions and clocks, code and phase biases, and Earth rotation parameters. To evaluate the new approach, products generated using the Global Positioning System (GPS) constellation and observations from the global IGS station network are compared to those of the IGS analysis centers. The comparisons show that the products generated at Graz University of Technology are on a similar level of quality to the products determined by the IGS analysis centers. This confirms that the raw observation approach is applicable to global GNSS processing. Some areas requiring further work have been identified, enabling future improvements of the method.

Exact Open Quantum System Dynamics Using the Hierarchy of Pure States (HOPS).

PubMed

Hartmann, Richard; Strunz, Walter T

2017-12-12

We show that the general and numerically exact Hierarchy of Pure States method (HOPS) is very well applicable to calculate the reduced dynamics of an open quantum system. In particular, we focus on environments with a sub-Ohmic spectral density (SD) resulting in an algebraic decay of the bath correlation function (BCF). The universal applicability of HOPS, reaching from weak to strong coupling for zero and nonzero temperature, is demonstrated by solving the spin-boson model for which we find perfect agreement with other methods, each one suitable for a special regime of parameters. The challenges arising in the strong coupling regime are not only reflected in the computational effort needed for the HOPS method to converge but also in the necessity for an importance sampling mechanism, accounted for by the nonlinear variant of HOPS. In order to include nonzero-temperature effects in the strong coupling regime we found that it is highly favorable for the HOPS method to use the zero-temperature BCF and include temperature via a stochastic Hermitian contribution to the system Hamiltonian.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yashchuk, V.V.; Takacs, P.; Anderson, E.H.

A modulation transfer function (MTF) calibration method based on binary pseudorandom (BPR) gratings and arrays has been proven to be an effective MTF calibration method for interferometric microscopes and a scatterometer. Here we report on a further expansion of the application range of the method. We describe the MTF calibration of a 6 in. phase shifting Fizeau interferometer. Beyond providing a direct measurement of the interferometer's MTF, tests with a BPR array surface have revealed an asymmetry in the instrument's data processing algorithm that fundamentally limits its bandwidth. Moreover, the tests have illustrated the effects of the instrument's detrending andmore » filtering procedures on power spectral density measurements. The details of the development of a BPR test sample suitable for calibration of scanning and transmission electron microscopes are also presented. Such a test sample is realized as a multilayer structure with the layer thicknesses of two materials corresponding to the BPR sequence. The investigations confirm the universal character of the method that makes it applicable to a large variety of metrology instrumentation with spatial wavelength bandwidths from a few nanometers to hundreds of millimeters.« less

Comprehensive quantification of signal-to-noise ratio and g-factor for image-based and k-space-based parallel imaging reconstructions.

PubMed

Robson, Philip M; Grant, Aaron K; Madhuranthakam, Ananth J; Lattanzi, Riccardo; Sodickson, Daniel K; McKenzie, Charles A

2008-10-01

Parallel imaging reconstructions result in spatially varying noise amplification characterized by the g-factor, precluding conventional measurements of noise from the final image. A simple Monte Carlo based method is proposed for all linear image reconstruction algorithms, which allows measurement of signal-to-noise ratio and g-factor and is demonstrated for SENSE and GRAPPA reconstructions for accelerated acquisitions that have not previously been amenable to such assessment. Only a simple "prescan" measurement of noise amplitude and correlation in the phased-array receiver, and a single accelerated image acquisition are required, allowing robust assessment of signal-to-noise ratio and g-factor. The "pseudo multiple replica" method has been rigorously validated in phantoms and in vivo, showing excellent agreement with true multiple replica and analytical methods. This method is universally applicable to the parallel imaging reconstruction techniques used in clinical applications and will allow pixel-by-pixel image noise measurements for all parallel imaging strategies, allowing quantitative comparison between arbitrary k-space trajectories, image reconstruction, or noise conditioning techniques. (c) 2008 Wiley-Liss, Inc.

Intact cell mass spectrometry as a progress tracking tool for batch and fed-batch fermentation processes.

PubMed

Helmel, Michaela; Marchetti-Deschmann, Martina; Raus, Martin; Posch, Andreas E; Herwig, Christoph; Šebela, Marek; Allmaier, Günter

2015-02-01

Penicillin production during a fermentation process using industrial strains of Penicillium chrysogenum is a research topic permanently discussed since the accidental discovery of the antibiotic. Intact cell mass spectrometry (ICMS) can be a fast and novel monitoring tool for the fermentation progress during penicillin V production in a nearly real-time fashion. This method is already used for the characterization of microorganisms and the differentiation of fungal strains; therefore, the application of ICMS to samples directly harvested from a fermenter is a promising possibility to get fast information about the progress of fungal growth. After the optimization of the ICMS method to penicillin V fermentation broth samples, the obtained ICMS data were evaluated by hierarchical cluster analysis or an in-house software solution written especially for ICMS data comparison. Growth stages of a batch and fed-batch fermentation of Penicillium chrysogenum are differentiated by one of those statistical approaches. The application of two matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) instruments in the linear positive ion mode from different vendors demonstrated the universal applicability of the developed ICMS method. The base for a fast and easy-to-use method for monitoring the fermentation progress of P. chrysogenum is created with this ICMS method developed especially for fermentation broth samples. Copyright © 2014 Elsevier Inc. All rights reserved.

Ct shift: A novel and accurate real-time PCR quantification model for direct comparison of different nucleic acid sequences and its application for transposon quantifications.

PubMed

Kolacsek, Orsolya; Pergel, Enikő; Varga, Nóra; Apáti, Ágota; Orbán, Tamás I

2017-01-20

There are numerous applications of quantitative PCR for both diagnostic and basic research. As in many other techniques the basis of quantification is that comparisons are made between different (unknown and known or reference) specimens of the same entity. When the aim is to compare real quantities of different species in samples, one cannot escape their separate precise absolute quantification. We have established a simple and reliable method for this purpose (Ct shift method) which combines the absolute and the relative approach. It requires a plasmid standard containing both sequences of amplicons to be compared (e.g. the target of interest and the endogenous control). It can serve as a reference sample with equal copies of templates for both targets. Using the ΔΔCt formula we can quantify the exact ratio of the two templates in each unknown sample. The Ct shift method has been successfully applied for transposon gene copy measurements, as well as for comparison of different mRNAs in cDNA samples. This study provides the proof of concept and introduces some potential applications of the method; the absolute nature of results even without the need for real reference samples can contribute to the universality of the method and comparability of different studies. Copyright © 2016 Elsevier B.V. All rights reserved.

Organizing integrated care in a university hospital: application of a conceptual framework

PubMed Central

Axelsson, Runo; Axelsson, Susanna Bihari; Gustafsson, Jeppe; Seemann, Janne

2014-01-01

Background and aim As a result of New Public Management, a number of industrial models of quality management have been implemented in health care, mainly in hospitals. At the same time, the concept of integrated care has been developed within other parts of the health sector. The aim of the article is to discuss the relevance of integrated care for hospitals. Theory and methods The discussion is based on application of a conceptual framework outlining a number of organizational models of integrated care. These models are illustrated in a case study of a Danish university hospital implementing a new organization for improving the patient flows of the hospital. The study of the reorganization is based mainly on qualitative data from individual and focus group interviews. Results The new organization of the university hospital can be regarded as a matrix structure combining a vertical integration of clinical departments with a horizontal integration of patient flows. This structure has elements of both interprofessional and interorganizational integration. A strong focus on teamwork, meetings and information exchange is combined with elements of case management and co-location. Conclusions It seems that integrated care can be a relevant concept for a hospital. Although the organizational models may challenge established professional boundaries and financial control systems, this concept can be a more promising way to improve the quality of care than the industrial models that have been imported into health care. This application of the concept may also contribute to widen the field of integrated care. PMID:24966806

Final Report to the National Energy Technology Laboratory on FY14- FY15 Cooperative Research with the Consortium for Electric Reliability Technology Solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vittal, Vijay; Lampis, Anna Rosa

The Power System Engineering Research Center (PSERC) engages in technological, market, and policy research for an efficient, secure, resilient, adaptable, and economic U.S. electric power system. PSERC, as a founding partner of the Consortium for Electric Reliability Technology Solutions (CERTS), conducted a multi-year program of research for U.S. Department of Energy (DOE) Office of Electricity Delivery and Energy Reliability (OE) to develop new methods, tools, and technologies to protect and enhance the reliability and efficiency of the U.S. electric power system as competitive electricity market structures evolve, and as the grid moves toward wide-scale use of decentralized generation (such asmore » renewable energy sources) and demand-response programs. Phase I of OE’s funding for PSERC, under cooperative agreement DE-FC26-09NT43321, started in fiscal year (FY) 2009 and ended in FY2013. It was administered by DOE’s National Energy Technology Laboratory (NETL) through a cooperative agreement with Arizona State University (ASU). ASU provided sub-awards to the participating PSERC universities. This document is PSERC’s final report to NETL on the activities for OE, conducted through CERTS, from September 2015 through September 2017 utilizing FY 2014 to FY 2015 funding under cooperative agreement DE-OE0000670. PSERC is a thirteen-university consortium with over 30 industry members. Since 1996, PSERC has been engaged in research and education efforts with the mission of “empowering minds to engineer the future electric energy system.” Its work is focused on achieving: • An efficient, secure, resilient, adaptable, and economic electric power infrastructure serving society • A new generation of educated technical professionals in electric power • Knowledgeable decision-makers on critical energy policy issues • Sustained, quality university programs in electric power engineering. PSERC core research is funded by industry, with a budget supporting approximately 30 principal investigators and some 70 graduate students and other researchers. Its researchers are multi-disciplinary, conducting research in three principal areas: power systems, power markets and policy, and transmission and distribution technologies. The research is collaborative; each project involves researchers typically at two universities working with industry advisors who have expressed interest in the project. Examples of topics for recent PSERC research projects include grid integration of renewables and energy storage, new tools for taking advantage of increased penetration of real-time system measurements, advanced system protection methods to maintain grid reliability, and risk and reliability assessment of increasingly complex cyber-enabled power systems. A PSERC’s objective is to proactively address the technical and policy challenges of U.S. electric power systems. To achieve this objective, PSERC works with CERTS to conduct technical research on advanced applications and investigate the design of fair and transparent electricity markets; these research topics align with CERTS research areas 1 and 2: Real-time Grid Reliability Management (Area 1), and Reliability and Markets (Area 2). The CERTS research areas overlap with the PSERC research stems: Power Systems, Power Markets, and Transmission and Distribution Technologies, as described on the PSERC website (see http://www.pserc.org/research/research_program.aspx). The performers were with Arizona State University (ASU), Cornell University (CU), University of California at Berkeley (UCB), and University of Illinois at Urbana-Champaign (UIUC). PSERC research activities in the area of reliability and markets focused on electric market and power policy analyses. The resulting studies suggest ways to frame best practices using organized markets for managing U.S. grid assets reliably and to identify highest priority areas for improvement. PSERC research activities in the area of advanced applications focused on mid- to long-term software research and development, with anticipated outcomes that move innovative ideas toward real-world application. Under the CERTS research area of Real-time Grid Reliability Management, PSERC has been focused on Advanced Applications Research and Development (AARD), a subgroup of activities that works to develop advanced applications and tools to more effectively operate the electricity delivery system, by enabling advanced analysis, visualization, monitoring and alarming, and decision support capabilities for grid operators.« less

Use of a Universal Identifier by Grant Applicants

EPA Pesticide Factsheets

OMB has issued a policy directive to implement the requirement for grant applicants to provide a Dun & Bradstreet (D&B) Data Universal NNumbering System (DUNS) number when applying for FedFederal grants or cooperative agreements on or after October 1,2003.

The University Entrance Exam that Diversified and the Problem

NASA Astrophysics Data System (ADS)

Kondo, Osamu

The percentage of students who go on to universities or junior colleges is over fifty percent which is more than half of high school students. However the nation's birthrate is in decline and the total number of university-age children shows a declining tendency. Hence we cannot expect an increase in the number of applicants in the future. On the other hand, the number of universities has been increasing year by year. The competition among universities to survive is very fierce. The diversification of entrance examination is a symbol of this competition. By diversifying entrance exams, universities aimed at the quality of excellent students in the beginning. However, they have changed their direction to pursue the quantity of students. As of Today the entrance examination is losing its original starting function which means most or all applicants can enter universities. It is time all of the universities return to its starting line.

[Chemical and Thermal Eye Burns].

PubMed

Struck, H-G

2016-11-01

Background: This review gives a therapeutic approach for the early treatment of chemical and thermal burns of the ocular surface (CTOS). Method: Based on a review of international literature, the experiences of University Hospital Aachen and Halle/Saale, Eye Clinic Cologne as well as experimental data of the research institute (An-Institut) at RWTH Aachen University are considered and discussed. Results: As the risk depends on the stage of CTOS, recommendations are given for acute treatment for different stages. Pathophysiological considerations will be discussed. Special treatment options for exceptional situations and for late phase CTOS are demonstrated. Conclusion: According to the latest data, the most important clinical recommendation for the acute phase of CTOS is the application of a suitable rinsing solution. Furthermore, anti-inflammatory treatment is of central importance. For the therapy of severe CTOS, approved and advanced surgical methods need to be applied. In this way, anti-inflammatory and tissue-protecting mechanisms are activated simultaneously. Georg Thieme Verlag KG Stuttgart · New York.

The Development of a Post-Baccalaureate Certificate Program in Molecular Diagnostics

PubMed Central

Williams, Gail S.; Brown, Judith D.; Keagle, Martha B.

2000-01-01

A post-baccalaureate certificate program in diagnostic molecular sciences was created in 1995 by the Diagnostic Genetic Sciences Program in the School of Allied Health at the University of Connecticut. The required on-campus lecture and laboratory courses include basic laboratory techniques, health care issues, cell biology, immunology, human genetics, research, management, and molecular diagnostic techniques and laboratory in molecular diagnostics. These courses precede a 6-month, full-time practicum at an affiliated full-service molecular laboratory. The practicum includes amplification and blotting methods, a research project, and a choice of specialized electives including DNA sequencing, mutagenesis, in situ hybridization methods, or molecular diagnostic applications in microbiology. Graduates of the program are immediately eligible to sit for the National Credentialing Agency examination in molecular biology to obtain the credential Clinical Laboratory Specialist in Molecular Biology (CLSp(MB). This description of the University of Connecticut program may assist other laboratory science programs in creating similar curricula. PMID:11232107

Integration of Libration Point Orbit Dynamics into a Universal 3-D Autonomous Formation Flying Algorithm

NASA Technical Reports Server (NTRS)

Folta, David; Bauer, Frank H. (Technical Monitor)

2001-01-01

The autonomous formation flying control algorithm developed by the Goddard Space Flight Center (GSFC) for the New Millennium Program (NMP) Earth Observing-1 (EO-1) mission is investigated for applicability to libration point orbit formations. In the EO-1 formation-flying algorithm, control is accomplished via linearization about a reference transfer orbit with a state transition matrix (STM) computed from state inputs. The effect of libration point orbit dynamics on this algorithm architecture is explored via computation of STMs using the flight proven code, a monodromy matrix developed from a N-body model of a libration orbit, and a standard STM developed from the gravitational and coriolis effects as measured at the libration point. A comparison of formation flying Delta-Vs calculated from these methods is made to a standard linear quadratic regulator (LQR) method. The universal 3-D approach is optimal in the sense that it can be accommodated as an open-loop or closed-loop control using only state information.

Planetary Protection Considerations For Exomars Meteorological Instrumentation.

NASA Astrophysics Data System (ADS)

Camilletti, Adam

2007-10-01

Planetary protection requirements for Oxford University's contribution to the upcoming ESA ExoMars mission are discussed and the current methods being used to fulfil these requirements are detailed and reviewed. Oxford University is supplying temperature and wind sensors to the mission and since these will be exposed to the Martian environment there is a requirement that they are sterilised to stringent COSPAR standards adhered to by ESA. Typically dry heat microbial reduction (DHMR) is used to reduce spacecraft bioburden but the high temperatures involved are not compatible with the some hardware elements. Alternative, low-temperature sterilisation methods are reviewed and their applicability to spacecraft hardware discussed. The use of a commercially available, bench-top endotoxin tester in planetary protection is also discussed and data from preliminary tests performed at Oxford are presented. These devices, which utilise the immune response of horseshoe crabs to the presence of endotoxin, have the potential to reduce the time taken to determine bioburden by removing the need for conventional assaying -a lengthy and sometimes expensive process.

[The application of universal adhesives in dental bonding].

PubMed

Guo, Jingmei; Lei, Wenlong; Yang, Hongye; Huang, Cui

2016-03-01

The bonding restoration has become an important clinical technique for the development of dental bonding technology. Because of its easy operation and the maximum preservation of tooth tissues, bonding repair is widely used in dental restoration. The recent multi-mode universal adhesives have brought new progress in dental bonding restoration. In this article the universal adhesives were reviewed according to its definition, development, improvement, application features and possible problems.

Flexible devices: from materials, architectures to applications

NASA Astrophysics Data System (ADS)

Zou, Mingzhi; Ma, Yue; Yuan, Xin; Hu, Yi; Liu, Jie; Jin, Zhong

2018-01-01

Flexible devices, such as flexible electronic devices and flexible energy storage devices, have attracted a significant amount of attention in recent years for their potential applications in modern human lives. The development of flexible devices is moving forward rapidly, as the innovation of methods and manufacturing processes has greatly encouraged the research of flexible devices. This review focuses on advanced materials, architecture designs and abundant applications of flexible devices, and discusses the problems and challenges in current situations of flexible devices. We summarize the discovery of novel materials and the design of new architectures for improving the performance of flexible devices. Finally, we introduce the applications of flexible devices as key components in real life. Project supported by the National Key R&D Program of China (Nos. 2017YFA0208200, 2016YFB0700600, 2015CB659300), the National Natural Science Foundation of China (Nos. 21403105, 21573108), and the Fundamental Research Funds for the Central Universities (No. 020514380107).

A universal data access and protocol integration mechanism for smart home

NASA Astrophysics Data System (ADS)

Shao, Pengfei; Yang, Qi; Zhang, Xuan

2013-03-01

With the lack of standardized or completely missing communication interfaces in home electronics, there is no perfect solution to address every aspect in smart homes based on existing protocols and technologies. In addition, the central control unit (CCU) of smart home system working point-to-point between the multiple application interfaces and the underlying hardware interfaces leads to its complicated architecture and unpleasant performance. A flexible data access and protocol integration mechanism is required. The current paper offers a universal, comprehensive data access and protocol integration mechanism for a smart home. The universal mechanism works as a middleware adapter with unified agreements of the communication interfaces and protocols, offers an abstraction of the application level from the hardware specific and decoupling the hardware interface modules from the application level. Further abstraction for the application interfaces and the underlying hardware interfaces are executed based on adaption layer to provide unified interfaces for more flexible user applications and hardware protocol integration. This new universal mechanism fundamentally changes the architecture of the smart home and in some way meets the practical requirement of smart homes more flexible and desirable.

Impact of the adoption of tobacco-free campus policies on student enrollment at colleges and universities, North Carolina, 2001-2010.

PubMed

Miller, Kimberly D; Yu, Dongqing; Lee, Joseph G L; Ranney, Leah M; Simons, Daniel J; Goldstein, Adam O

2015-01-01

College and university administrators have expressed concern that adoption of tobacco-free policies may reduce applications and enrollment. This study examines adoption and implementation of 100% tobacco-free campus policies by institutions of higher education on applications and enrollment. North Carolina private colleges and universities and public community colleges. Analysis was conducted in 2011. Student enrollment and application data were analyzed by campus type to determine (a) if there was a difference in student applications and enrollment before and after policy implementation, and (b) if there was a difference in student applications and enrollment for campuses with versus without a policy. No significant differences were found in student enrollment or applications when comparing years prior to and following policy implementation or when comparing with institutions without 100% tobacco-free campus policies. The authors found no evidence that 100% tobacco-free policy adoption had an impact on student enrollment or applications.

Aggregative Learning Method and Its Application for Communication Quality Evaluation

NASA Astrophysics Data System (ADS)

Akhmetov, Dauren F.; Kotaki, Minoru

2007-12-01

In this paper, so-called Aggregative Learning Method (ALM) is proposed to improve and simplify the learning and classification abilities of different data processing systems. It provides a universal basis for design and analysis of mathematical models of wide class. A procedure was elaborated for time series model reconstruction and analysis for linear and nonlinear cases. Data approximation accuracy (during learning phase) and data classification quality (during recall phase) are estimated from introduced statistic parameters. The validity and efficiency of the proposed approach have been demonstrated through its application for monitoring of wireless communication quality, namely, for Fixed Wireless Access (FWA) system. Low memory and computation resources were shown to be needed for the procedure realization, especially for data classification (recall) stage. Characterized with high computational efficiency and simple decision making procedure, the derived approaches can be useful for simple and reliable real-time surveillance and control system design.

Recent advances in mid- and near-infrared spectroscopy with applications for research and teaching, focusing on petrochemistry and biotechnology relevant products

NASA Astrophysics Data System (ADS)

Heise, H. M.; Fritzsche, J.; Tkatsch, H.; Waag, F.; Karch, K.; Henze, K.; Delbeck, S.; Budde, J.

2013-11-01

Mid- and near-infrared spectroscopy is introduced as a versatile analytical method for characterizing liquid and solid chemicals as obtained from petrochemistry and biotechnology processes. Besides normal transmission measurements, special equipment with silver halide fiber-optic probes allowing efficient analysis based on mid-infrared attenuated total reflection, and an accessory for near-infrared diffuse reflection measurements, are presented. The latter technique can be used advantageously for powdered samples such as microalgae biomass and polysaccharides, as well as for different tissues such as meat samples. The advantages and disadvantages of both methods, which can be used for industrial process monitoring and chemical quality control applications, are discussed, and have been used in several research projects of BSc students within their degree course of bio- and nano-technologies of our University of Applied Sciences.

On advanced configuration enhance adaptive system optimization

NASA Astrophysics Data System (ADS)

Liu, Hua; Ding, Quanxin; Wang, Helong; Guo, Chunjie; Chen, Hongliang; Zhou, Liwei

2017-10-01

For aim to find an effective method to structure to enhance these adaptive system with some complex function and look forward to establish an universally applicable solution in prototype and optimization. As the most attractive component in adaptive system, wave front corrector is constrained by some conventional technique and components, such as polarization dependence and narrow working waveband. Advanced configuration based on a polarized beam split can optimized energy splitting method used to overcome these problems effective. With the global algorithm, the bandwidth has been amplified by more than five times as compared with that of traditional ones. Simulation results show that the system can meet the application requirements in MTF and other related criteria. Compared with the conventional design, the system has reduced in volume and weight significantly. Therefore, the determining factors are the prototype selection and the system configuration, Results show their effectiveness.

The Effects of the Critical Ice Accretion on Airfoil and Wing Performance

NASA Technical Reports Server (NTRS)

Selig, Michael S.; Bragg, Michael B.; Saeed, Farooq

1998-01-01

In support of the NASA Lewis Modern Airfoils Ice Accretion Test Program, the University of Illinois at Urbana-Champaign provided expertise in airfoil design and aerodynamic analysis to determine the aerodynamic effect of ice accretion on modern airfoil sections. The effort has concentrated on establishing a design/testing methodology for "hybrid airfoils" or "sub-scale airfoils," that is, airfoils having a full-scale leading edge together with a specially designed and foreshortened aft section. The basic approach of using a full-scale leading edge with a foreshortened aft section was considered to a limited extent over 40 years ago. However, it was believed that the range of application of the method had not been fully exploited. Thus a systematic study was being undertaken to investigate and explore the range of application of the method so as to determine its overall potential.

Liquid Crystals

NASA Technical Reports Server (NTRS)

1990-01-01

Thermochromic liquid crystals, or TLCs, are a type of liquid crystals that react to changes in temperature by changing color. The Hallcrest/NASA collaboration involved development of a new way to visualize boundary layer transition in flight and in wind tunnel testing of aircraft wing and body surfaces. TLCs offered a new and potentially better method of visualizing the boundary layer transition in flight. Hallcrest provided a liquid crystal formulation technique that afforded great control over the sensitivity of the liquid crystals to varying conditions. Method is of great use to industry, government and universities for aerodynamic and hydrodynamic testing. Company's principal line is temperature indicating devices for industrial use, such as non-destructive testing and flaw detection in electric/electronic systems, medical application, such as diagnostic systems, for retail sale, such as room, refrigerator, baby bath and aquarium thermometers, and for advertising and promotion specials. Additionally, Hallcrest manufactures TLC mixtures for cosmetic applications, and liquid crystal battery tester for Duracell batteries.

Resolution in forensic microbial genotyping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Velsko, S P

2005-08-30

Resolution is a key parameter for differentiating among the large number of strain typing methods that could be applied to pathogens involved in bioterror events or biocrimes. In this report we develop a first-principles analysis of strain typing resolution using a simple mathematical model to provide a basis for the rational design of microbial typing systems for forensic applications. We derive two figures of merit that describe the resolving power and phylogenetic depth of a strain typing system. Rough estimates of these figures-of-merit for MLVA, MLST, IS element, AFLP, hybridization microarrays, and other bacterial typing methods are derived from mutationmore » rate data reported in the literature. We also discuss the general problem of how to construct a ''universal'' practical typing system that has the highest possible resolution short of whole-genome sequencing, and that is applicable with minimal modification to a wide range of pathogens.« less

Tracing Magnetic Fields With The Polarization Of Submillimeter Lines

NASA Astrophysics Data System (ADS)

Zhang, Heshou; Yan, Huirong

2017-10-01

Magnetic fields play important roles in many astrophysical processes. However, there is no universal diagnostic for the magnetic fields in the interstellar medium (ISM) and each magnetic tracer has its limitation. Any new detection method is thus valuable. Theoretical studies have shown that submillimeter fine-structure lines are polarized due to atomic alignment by Ultraviolet (UV) photon-excitation, which opens up a new avenue to probe interstellar magnetic fields. The method is applicable to all radiative-excitation dominant region, e.g., H II Regions, PDRs. The polarization of the submillimeter fine-structure lines induced by atomic alignment could be substantial and the applicability of using the spectro-polarimetry of atomic lines to trace magnetic fields has been supported by synthetic observations of simulated ISM in our recent paper. Our results demonstrate that the polarization of submillimeter atomic lines is a powerful magnetic tracer and add great value to the observational studies of the submilimeter astronomy.

Near Real-time GNSS-based Ionospheric Model using Expanded Kriging in the East Asia Region

NASA Astrophysics Data System (ADS)

Choi, P. H.; Bang, E.; Lee, J.

2016-12-01

Many applications which utilize radio waves (e.g. navigation, communications, and radio sciences) are influenced by the ionosphere. The technology to provide global ionospheric maps (GIM) which show ionospheric Total Electron Content (TEC) has been progressed by processing GNSS data. However, the GIMs have limited spatial resolution (e.g. 2.5° in latitude and 5° in longitude), because they are generated using globally-distributed and thus relatively sparse GNSS reference station networks. This study presents a near real-time and high spatial resolution TEC model over East Asia by using ionospheric observables from both International GNSS Service (IGS) and local GNSS networks and the expanded kriging method. New signals from multi-constellation (e.g,, GPS L5, Galileo E5) were also used to generate high-precision TEC estimates. The newly proposed estimation method is based on the universal kriging interpolation technique, but integrates TEC data from previous epochs to those from the current epoch to improve the TEC estimation performance by increasing ionospheric observability. To propagate previous measurements to the current epoch, we implemented a Kalman filter whose dynamic model was derived by using the first-order Gauss-Markov process which characterizes temporal ionospheric changes under the nominal ionospheric conditions. Along with the TEC estimates at grids, the method generates the confidence bounds on the estimates using resulting estimation covariance. We also suggest to classify the confidence bounds into several categories to allow users to recognize the quality levels of TEC estimates according to the requirements for user's applications. This paper examines the performance of the proposed method by obtaining estimation results for both nominal and disturbed ionospheric conditions, and compares these results to those provided by GIM of the NASA Jet propulsion Laboratory. In addition, the estimation results based on the expanded kriging method are compared to the results from the universal kriging method for both nominal and disturbed ionospheric conditions.

Microfluidic-Based Platform for Universal Sample Preparation and Biological Assays Automation for Life-Sciences Research and Remote Medical Applications

NASA Astrophysics Data System (ADS)

Brassard, D.; Clime, L.; Daoud, J.; Geissler, M.; Malic, L.; Charlebois, D.; Buckley, N.; Veres, T.

2018-02-01

An innovative centrifugal microfluidic universal platform for remote bio-analytical assays automation required in life-sciences research and medical applications, including purification and analysis from body fluids of cellular and circulating markers.

PREFACE: EPS Euroconference XIX Nuclear Physics Divisional Conference: New Trends in Nuclear Physics Applications and Technology

NASA Astrophysics Data System (ADS)

2006-06-01

It was with great pleasure that the Department of Nuclear and Theoretical Physics of the University of Pavia and the INFN (Istituto Nazionale di Fisica Nucleare) Structure of Pavia organised the XIX Nuclear Physics Divisional Conference of the European Physical Society, which was held in the historical buildings of the University of Pavia from 5-9 September 2005. The Conference was devoted to the discussion of the most recent experimental and theoretical achievements in the field of Nuclear Physics applications, as well as of the latest developments in technological tools related to Nuclear Physics research. The University of Pavia has a long tradition in Physics and in Applied Physics, being the site where Alessandro Volta developed his "pila", the precursor of the modern battery. This is the place where the first experiments with electricity were conducted and where the term "capacitance" used for capacitors was invented. Today the University hosts a Triga Mark II nuclear reactor, which is used by the Departments of the University of Pavia and by other Universities and private companies as well. Moreover, Pavia is the site selected for the construction of the CNAO complex "Centro Nazionale di Adroterapia Oncologica" (National Centre for Oncological Hadrontherapy), planned for 2005-2008 which represents a unique facility in Italy and will be among the first complexes of this type in Europe. The Conference has gathered together experts in various fields from different countries and has been the occasion to review the present status and to discuss the new emerging trends in Nuclear Physics and its applications to multidisciplinary researches and the development of new technologies. The following topics were treated: Nuclear Techniques in Medicine and Life Sciences (Cancer Therapy, new Imaging and Diagnostics Tools, Radioisotope production, Radiation Protection and Dosimetry). Applications of Nuclear Techniques in Art, Archaeometry and other Interdisciplinary fields. Role of Nuclear Techniques in Environment Problems. Applications of Nuclear Techniques relevant for Civil Security (contraband and explosive detection, search for Weapons of Mass Destruction, Nuclear Safeguards). Nuclear Applications in Space Research. Material and Structure Testing in Research and Industry. New contributions of Nuclear Techniques to the solution of the Energy Production problems and Nuclear Waste Transmutation. Emerging experimental techniques, new detectors and new modeling tools. During the Monday morning Session of the Conference, the 2005 IBA-EUROPHYSICS PRIZE for Applied Nuclear Science and Nuclear Methods in Medicine, sponsored by the Belgian company IBA, was awarded to the two laureates Werner Heil (Mainz) and Pierre Jean Nacher (Paris) for the development of spin polarized 3He targets by optical pumping and their applications in nuclear science and medicine. The meeting was a real success, with 18 invited talks, 66 contributed talks and 31 posters and an overall participation, during five full days, of around 150 scientists from different European and non-European countries. It also hosted a three day industrial exhibition of a selection of Companies that sponsored the event. The Organisers take thos opportunity to thank the University of Pavia, the Amministrazione Comunale di Pavia and the Provincia di Pavia, as well as all exhibitors (Ametek, Ansaldo Superconduttori, Caen, Else, Hamamatsu, IBA, Micos, Micron Semiconductor), for their support of the Conference. The Organisers finally wish to thank the Scientific Secretary of the Conference, Dr Andrea Fontana of INFN Pavia, for the huge amount of work done in preparing the Conference, Mr Claudio Casella of the Department of Nuclear and Theoretical Physics of the University of Pavia for technical support and the Conference staff, Dr Gaia Boghen and the graduate students Federica Devecchi and Silvia Franchino, for their invaluable help. The very effective and professional work of the staff of PRAGMA Congressi, who took charge of all the administrative and accommodation procedures, is also acknowledged. The Local Organizing Committee (Pavia, January 2006)

Population resizing on fitness improvement genetic algorithm to optimize promotion visit route based on android and google maps API

NASA Astrophysics Data System (ADS)

Listyorini, Tri; Muzid, Syafiul

2017-06-01

The promotion team of Muria Kudus University (UMK) has done annual promotion visit to several senior high schools in Indonesia. The visits were done to numbers of schools in Kudus, Jepara, Demak, Rembang and Purwodadi. To simplify the visit, each visit round is limited to 15 (fifteen) schools. However, the team frequently faces some obstacles during the visit, particularly in determining the route that they should take toward the targeted school. It is due to the long distance or the difficult route to reach the targeted school that leads to elongated travel duration and inefficient fuel cost. To solve these problems, the development of a certain application using heuristic genetic algorithm method based on the dynamic of population size or Population Resizing on Fitness lmprovement Genetic Algorithm (PRoFIGA), was done. This android-based application was developed to make the visit easier and to determine a shorter route for the team, hence, the visiting period will be effective and efficient. The result of this research was an android-based application to determine the shortest route by combining heuristic method and Google Maps Application Programming lnterface (API) that display the route options for the team.

UPSS and G2

NASA Technical Reports Server (NTRS)

Dito, Scott J.

2014-01-01

The Universal Propellant Servicing System (UPSS) is a dedicated mobile launcher propellant delivery method that will minimize danger and complexity in order to allow vehicles to be serviced and ultimately launched from a variety of locations previously not seen fit for space launch. The UPPS/G2 project is the development of a model, simulation, and ultimately a working application that will control and monitor the cryogenic fluid delivery to the rocket for testing purposes. To accomplish this, the project is using the programming language/environment Gensym G2. The environment is an all-inclusive application that allows development, testing, modeling, and finally operation of the unique application through graphical and programmatic methods. We have learned G2 through classes and trial-and-error, and are now in the process of building the application that will soon be able to be tested on apparatuses here at Kennedy Space Center, and eventually on the actual unit. The UPSS will bring near-autonomous control of launches to those that need it, as well it will be a great addition to NASA and KSC's operational viability and the opportunity to bring space launches to parts of the world, and in time constraints, once not thought possible.

Preparation of amine functionalized carbon nanotubes via a bioinspired strategy and their application in Cu2+ removal

NASA Astrophysics Data System (ADS)

Zhang, Xiaoyong; Huang, Qiang; Liu, Meiying; Tian, Jianwen; Zeng, Guangjian; Li, Zhen; Wang, Ke; Zhang, Qinsong; Wan, Qing; Deng, Fengjie; Wei, Yen

2015-07-01

The environmental applications of carbon nanotubes (CNTs) have attracted great research attention since their first discovery. However, the performance of pristine CNTs for removal of heavy metal ions is greatly limited by their severe aggregation and lack of functional groups. In this work, a novel method has been developed for preparation of amine functionalized CNTs via combination of mussel inspired chemistry and Michael addition reaction. CNTs were first coated with polydopamine (PDA) through mussel inspired chemistry. And then commercial available agent polyethylene polyamine with a number of amine groups was further conjugated with PDA coated CNTs via Michael addition reaction. A series of characterization techniques have demonstrated that the amine functionalized CNTs have been successfully prepared. Furthermore, the adsorption application of thus amine functionalized CNTs for Cu2+ was examined. The effects of various parameters including pH solution, temperature, initial Cu2+ concentration and the adsorbent concentration were investigated. The data from experiments were analyzed by the Langmuir and Freundlich models of adsorption. Due to the universal of mussel inspired chemistry, the method described in this work should be a general strategy for surface modification of materials for environmental applications.

Large-scale synthesis of hybrid metal oxides through metal redox mechanism for high-performance pseudocapacitors

PubMed Central

Ren, Zhonghua; Li, Jianpeng; Ren, Yaqi; Wang, Shuguang; Qiu, Yejun; Yu, Jie

2016-01-01

Electrochemical performance and production cost are the main concerns for the practical application of supercapacitors. Here we report a simple and universally applicable method to prepare hybrid metal oxides by metal redox reaction utilizing the inherent reducibility of metals and oxidbility of for the first time. As an example, Ni(OH)2/MnO2 hybrid nanosheets (NMNSs) are grown for supercapacitor application by self-reaction of Ni foam substrates in KMnO4 solution at room temperature. The obtained hybrid nanosheets exhibit high specific capacitance (2,937 F g−1). The assembled solid-state asymmetric pseudocapacitors possess ultrahigh energy density of 91.13 Wh kg−1 (at the power density of 750 W kg−1) and extraordinary cycling stability with 92.28% capacitance retention after 25,000 cycles. Co(OH)2/MnO2 and Fe2O3/MnO2 hybrid oxides are also synthesized through this metal redox mechanism. This green and low-cost method is capable of large-scale production and one-step preparation of the electrodes, holding promise for practical application of high-performance pseudocapacitors. PMID:26805027

Carbon Nanofibers and Their Composites: A Review of Synthesizing, Properties and Applications

PubMed Central

Feng, Lichao; Xie, Ning; Zhong, Jing

2014-01-01

Carbon nanofiber (CNF), as one of the most important members of carbon fibers, has been investigated in both fundamental scientific research and practical applications. CNF composites are able to be applied as promising materials in many fields, such as electrical devices, electrode materials for batteries and supercapacitors and as sensors. In these applications, the electrical conductivity is always the first priority need to be considered. In fact, the electrical property of CNF composites largely counts on the dispersion and percolation status of CNFs in matrix materials. In this review, the electrical transport phenomenon of CNF composites is systematically summarized based on percolation theory. The effects of the aspect ratio, percolation backbone structure and fractal characteristics of CNFs and the non-universality of the percolation critical exponents on the electrical properties are systematically reviewed. Apart from the electrical property, the thermal conductivity and mechanical properties of CNF composites are briefly reviewed, as well. In addition, the preparation methods of CNFs, including catalytic chemical vapor deposition growth and electrospinning, and the preparation methods of CNF composites, including the melt mixing and solution process, are briefly introduced. Finally, their applications as sensors and electrode materials are described in this review article. PMID:28788657

The Use of Resistivity Methods in Terrestrial Forensic Searches

NASA Astrophysics Data System (ADS)

Wolf, R. C.; Raisuddin, I.; Bank, C.

2013-12-01

The increasing use of near-surface geophysical methods in forensic searches has demonstrated the need for further studies to identify the ideal physical, environmental and temporal settings for each geophysical method. Previous studies using resistivity methods have shown promising results, but additional work is required to more accurately interpret and analyze survey findings. The Ontario Provincial Police's UCRT (Urban Search and Rescue; Chemical, Biolgical, Radiological, Nuclear and Explosives; Response Team) is collaborating with the University of Toronto and two additional universities in a multi-year study investigating the applications of near-surface geophysical methods to terrestrial forensic searches. In the summer of 2012, on a test site near Bolton, Ontario, the OPP buried weapons, drums and pigs (naked, tarped, and clothed) to simulate clandestine graves and caches. Our study aims to conduct repeat surveys using an IRIS Syscal Junior with 48 electrode switching system resistivity-meter. These surveys will monitor changes in resistivity reflecting decomposition of the object since burial, and identify the strengths and weaknesses of resistivity when used in a rural, clandestine burial setting. Our initial findings indicate the usefulness of this method, as prominent resistivity changes have been observed. We anticipate our results will help to assist law enforcement agencies in determining the type of resistivity results to expect based on time since burial, depth of burial and state of dress of the body.

LISA, the next generation: from a web-based application to a fat client.

PubMed

Pierlet, Noëlla; Aerts, Werner; Vanautgaerden, Mark; Van den Bosch, Bart; De Deurwaerder, André; Schils, Erik; Noppe, Thomas

2008-01-01

The LISA application, developed by the University Hospitals Leuven, permits referring physicians to consult the electronic medical records of their patients over the internet in a highly secure way. We decided to completely change the way we secured the application, discard the existing web application and build a completely new application, based on the in-house developed hospital information system, used in the University Hospitals Leuven. The result is a fat Java client, running on a Windows Terminal Server, secured by a commercial SSL-VPN solution.

Analysis of Unit Costs in a University. The Fribourg Example. Program on Institutional Management in Higher Education.

ERIC Educational Resources Information Center

Pasquier, Jacques; Sachse, Matthias

Costing principles are applied to a university by estimating unit costs and their component factors for the university's different inputs, activities, and outputs. The information system used is designed for Fribourg University but could be applicable to other Swiss universities and could serve Switzerland's universities policy. In general, it…

Designing human centered GeoVisualization application--the SanaViz--for telehealth users: a case study.

PubMed

Joshi, Ashish; de Araujo Novaes, Magdala; Machiavelli, Josiane; Iyengar, Sriram; Vogler, Robert; Johnson, Craig; Zhang, Jiajie; Hsu, Chiehwen E

2012-01-01

Public health data is typically organized by geospatial unit. GeoVisualization (GeoVis) allows users to see information visually on a map. Examine telehealth users' perceptions towards existing public health GeoVis applications and obtains users' feedback about features important for the design and development of Human Centered GeoVis application "the SanaViz". We employed a cross sectional study design using mixed methods approach for this pilot study. Twenty users involved with the NUTES telehealth center at Federal University of Pernambuco (UFPE), Recife, Brazil were enrolled. Open and closed ended questionnaires were used to gather data. We performed audio recording for the interviews. Information gathered included socio-demographics, prior spatial skills and perception towards use of GeoVis to evaluate telehealth services. Card sorting and sketching methods were employed. Univariate analysis was performed for the continuous and categorical variables. Qualitative analysis was performed for open ended questions. Existing Public Health GeoVis applications were difficult to use. Results found interaction features zooming, linking and brushing and representation features Google maps, tables and bar chart as most preferred GeoVis features. Early involvement of users is essential to identify features necessary to be part of the human centered GeoVis application "the SanaViz".

Integrating Chemistry: Crossing the Millennium Divide.

PubMed

Housecroft, Catherine E

2018-02-01

A personal account of the development of two University level chemistry books is presented. The account focuses on ways to integrate the traditional branches of chemistry into a textbook that captures the imagination of students and relates chemical principles and fundamental topics to environmental, medicinal, biological and industrial applications. The ways in which teaching methods have changed over two decades and how web-based resources can be used to improve the communication of chemical (in particular structural) concepts are highlighted.

Development of a Hampton University Program for Novel Breast Cancer Imaging and Therapy Research

DTIC Science & Technology

2015-06-01

student ( Nanda Karthik) involved…. Should be able to give you some text!]. Aim 2 Develop and test a practical method for application of a magnetic field ...a Department of Energy (DOE) nuclear physics research facility operated by Jefferson Science Associates LLC. Jefferson Lab resources for this...minimally affected by breast density because of the higher energy photons of 99mTc. In a recent study that included patients who had inconclusive

Subspace Iteration and Immersed Interface Methods: Theory, Algorithm, and Applications

DTIC Science & Technology

2010-08-20

boundary, Navier-Stokes equations Zhilin Li, Kazufumi Ito North Carolina State University Office of Contract and Grants Leazar Hall Lower Level- MC...ORGANIZATION REPORT NUMBER 19a. NAME OF RESPONSIBLE PERSON 19b. TELEPHONE NUMBER Zhilin Li 919-515-3210 3. DATES COVERED (From - To) 15-Aug-2006...Names of Faculty Supported National Academy MemberPERCENT_SUPPORTEDNAME Zhilin Li 0.40 No Kazufumi Ito 0.40 No 0.80FTE Equivalent: 2Total Number

Introduction of Team-Based Learning (TBL) at Kilimanjaro Christian Medical University College: Experience with the Ectoparasites Module

PubMed Central

Nyindo, Mramba; Kitau, Jovin; Lisasi, Esther; Kapanda, Gibson; Matowo, Johnston; Francis, Patrick; Bartlett, John

2014-01-01

Background Contemporary teaching in sub-Saharan African medical schools is largely through didactic and problem-based approaches. These schools face challenges from burgeoning student numbers, severe faculty shortages, faculty without instruction in teaching methods, and severe infrastructure inadequacies. Team-based learning (TBL) is a pedagogy which may be attractive because it spares faculty time. TBL was piloted in a module on ectoparasites at the Kilimanjaro Christian Medical University College (KCMU Co). Methods TBL orientation began 6 weeks before starting the module. Students were issued background readings and individual and group readiness assessment tests, followed by module application, discussion, and evaluation. At completion, student perceptions of TBL were assessed using a 5-point Likert scale evaluating 6 domains, with a score of 5 being most favorable. Strength of consensus measures (sCns) were applied. Final examination scores were compiled for 2011 (didactic) and 2012 (TBL). Results 158 students participated in the module. The mean student scores across the 6 domains ranged from 4.2–4.5, with a high degree of consensus (range 85–90%). The final examination scores improved between 2011 and 2012 Conclusions KCMU Co student perceptions of TBL were very positive, and final exam grades improved. These observations suggest future promise for TBL applications at KCMU Co and potentially other schools. PMID:24491164

Sixth International Conference on Squeezed States and Uncertainty Relations

NASA Technical Reports Server (NTRS)

Han, D. (Editor); Kim, Y. S. (Editor); Solimento, S. (Editor)

2000-01-01

These proceedings contain contributions from about 200 participants to the 6th International Conference on Squeezed States and Uncertainty Relations (ICSSUR'99) held in Naples May 24-29, 1999, and organized jointly by the University of Naples "Federico II," the University of Maryland at College Park, and the Lebedev Institute, Moscow. This was the sixth of a series of very successful meetings started in 1990 at the College Park Campus of the University of Maryland. The other meetings in the series were held in Moscow (1992), Baltimore (1993), Taiyuan P.R.C. (1995) and Balatonfuered, Hungary (1997). The present one was held at the campus Monte Sant'Angelo of the University "Federico II" of Naples. The meeting sought to provide a forum for updating and reviewing a wide range of quantum optics disciplines, including device developments and applications, and related areas of quantum measurements and quantum noise. Over the years, the ICSSUR Conference evolved from a meeting on quantum measurement sector of quantum optics, to a wide range of quantum optics themes, including multifacet aspects of generation, measurement, and applications of nonclassical light (squeezed and Schrodinger cat radiation fields, etc.), and encompassing several related areas, ranging from quantum measurement to quantum noise. ICSSUR'99 brought together about 250 people active in the field of quantum optics, with special emphasis on nonclassical light sources and related areas. The Conference was organized in 8 Sections: Squeezed states and uncertainty relations; Harmonic oscillators and squeeze transformations; Methods of quantum interference and correlations; Quantum measurements; Generation and characterisation of non-classical light; Quantum noise; Quantum communication and information; and Quantum-like systems.

Incorporation of web-based applications and online resources in undergraduate medical education in the Irish Republic. Can new changes be incorporated in the current medical curriculum?

PubMed Central

Dhatt, Karanvir Singh; Kaliaperumal, Chandrasekaran

2014-01-01

Background/Aim: Significant change has been happening in the introduction of technology in medical teaching all over the world. We aim to determine if the undergraduate medical students and teachers are open to incorporating changes in the current medical curriculum or if there is a need for the same in the Republic of Ireland. Materials and Methods: A cross-sectional study involving 202 participants of whom 152 were medical students and 50 medical professionals (teachers and hospital doctors) were carried out involving three different medical universities namely; University College Cork (UCC), University College Dublin (UCD), and National University of Ireland in Galway (NUIG). Participants were requested to answer a series of 15 questions designed incorporating various fields of technology necessary for the study. The data was collected and analyzed using Statistical Package for Social Sciences (SPSS) software to determine statistical significance. Results: The participants overall had a positive attitude toward the utility of modern technology and web-based applications in current medical curriculum. Ninety-one percent of the participants preferred the introduction of modern technology into medical education and 7% were against the idea and a further 2% of them remained undecided. Conclusion: There seems to be a “technology gap” in the current undergraduate medical curriculum in Ireland. A large-scale study involving more participants from all the medical schools in Ireland is recommended. We believe, changes can be brought into the current medical teaching and learning to make the process more fruitful and successful. PMID:25097432

Second-chance university admission, the theory of planned behaviour and student achievement

NASA Astrophysics Data System (ADS)

Alas, Yabit; Anshari, Muhammad; Sabtu, Norakmarul Ihsan; Yunus, Norazmah

2016-06-01

The theory of planned behaviour attempts to explain factors which influence behaviour. One of these factors is intention. Positive or negative intentions are formed by a person's impression of the way other people would perceive similar behaviour (external forces). The authors of this study used the theory of planned behaviour to examine, compare and interpret the academic performance of students entering a university either via direct intake or via a bridging programme. This study focuses on the UniBridge programme offered by Universiti Brunei Darussalam (UBD), which is an intensive one-semester course that prepares students for undergraduate-level study. While direct-intake applicants pass minimum requirements for entry and are able to enrol directly into an undergraduate programme, applicants who do not meet these minimum requirements can join this bridging programme which is designed to be a "second-chance" entry option. Using a mixed-methods approach, the authors subjected student performance data of both direct-intake and bridge-programme undergraduates to statistical analyses, carried out interviews and then used the theoretical framework of planned behaviour to pinpoint individual attitudes and social pressures which form an intention to prepare for entry examinations. The results were mostly consistent and showed that the two groups were competitive in terms of undergraduate academic achievement, thus proving the second-chance programme to be effective in enabling students with poor A-Level results to experience academic confidence at university level. On the strength of these findings, the authors conclude their paper with recommendations for tertiary institutions to support lifelong learning initiatives through the use of multiple channels of entry.

Implementation of an innovative teaching project in a Chemical Process Design course at the University of Cantabria, Spain

NASA Astrophysics Data System (ADS)

Galan, Berta; Muñoz, Iciar; Viguri, Javier R.

2016-09-01

This paper shows the planning, the teaching activities and the evaluation of the learning and teaching process implemented in the Chemical Process Design course at the University of Cantabria, Spain. Educational methods to address the knowledge, skills and attitudes that students who complete the course are expected to acquire are proposed and discussed. Undergraduate and graduate engineers' perceptions of the methodology used are evaluated by means of a questionnaire. Results of the teaching activities and the strengths and weaknesses of the proposed case study are discussed in relation to the course characteristics. The findings of the empirical evaluation shows that the excessive time students had to dedicate to the case study project and dealing with limited information are the most negative aspects obtained, whereas an increase in the students' self-confidence and the practical application of the methodology are the most positive aspects. Finally, improvements are discussed in order to extend the application of the methodology to other courses offered as part of the chemical engineering degree.

An assessment of collections at the University of Wisconsin-Madison Health Sciences Libraries: drug resistance.

PubMed Central

Bergen, P L; Nemec, D

1999-01-01

In December 1997, the authors completed an in-depth collection assessment project at the University of Wisconsin-Madison Health Sciences Libraries. The purpose was to develop a framework for future collection assessment projects by completing a multifaceted evaluation of the libraries' monograph and serial collections in the subject area of drug resistance. Evaluators adapted and synthesized several traditional collection assessment tools, including shelflist measurement, bibliography and standard list checking, and citation analysis. Throughout the project, evaluators explored strategies to overcome some of the problems inherent in the application of traditional collection assessment methods to the evaluation of biomedical collections. Their efforts resulted in the identification of standard monographs and core journals for the subject area, a measurement of the collections' strength relative to the collections of benchmark libraries, and a foundation for future collection development within the subject area. The project's primary outcome was a collection assessment methodology that has potential application to both internal and cooperative collection development in medical, pharmaceutical, and other health sciences libraries. PMID:9934527

Developing a protocol for creating microfluidic devices with a 3D printer, PDMS, and glass

NASA Astrophysics Data System (ADS)

Collette, Robyn; Novak, Eric; Shirk, Kathryn

2015-03-01

Microfluidics research requires the design and fabrication of devices that have the ability to manipulate small volumes of fluid, typically ranging from microliters to picoliters. These devices are used for a wide range of applications including the assembly of materials and testing of biological samples. Many methods have been previously developed to create microfluidic devices, including traditional nanolithography techniques. However, these traditional techniques are cost-prohibitive for many small-scale laboratories. This research explores a relatively low-cost technique using a 3D printed master, which is used as a template for the fabrication of polydimethylsiloxane (PDMS) microfluidic devices. The masters are designed using computer aided design (CAD) software and can be printed and modified relatively quickly. We have developed a protocol for creating simple microfluidic devices using a 3D printer and PDMS adhered to glass. This relatively simple and lower-cost technique can now be scaled to more complicated device designs and applications. Funding provided by the Undergraduate Research Grant Program at Shippensburg University and the Student/Faculty Research Engagement Grants from the College of Arts and Sciences at Shippensburg University.

Extent of ICT Application in the Management of Administrative and Student Personnel Records in the Public Universities in Enugu State, Nigeria

ERIC Educational Resources Information Center

Chidobi, Roseline Unoma

2015-01-01

The purpose of the study is to identify the extent of ICT application in management of administrative and student personnel record in the public universities in Enugu state. The study was a survey research the quantitative data were collected through a 20-item questionnaire title "Extent of ICT Application in Record management"…

32 CFR 242.2 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ADMISSION POLICIES AND PROCEDURES FOR THE SCHOOL OF MEDICINE, UNIFORMED SERVICES UNIVERSITY OF THE HEALTH SCIENCES § 242.2 Applicability. This part applies to the Office of the Secretary of Defense, the Military Departments, the Uniformed Services University of the Health Sciences (USUHS), and the Department of Defense...

32 CFR 242.2 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ADMISSION POLICIES AND PROCEDURES FOR THE SCHOOL OF MEDICINE, UNIFORMED SERVICES UNIVERSITY OF THE HEALTH SCIENCES § 242.2 Applicability. This part applies to the Office of the Secretary of Defense, the Military Departments, the Uniformed Services University of the Health Sciences (USUHS), and the Department of Defense...

32 CFR 242.2 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ADMISSION POLICIES AND PROCEDURES FOR THE SCHOOL OF MEDICINE, UNIFORMED SERVICES UNIVERSITY OF THE HEALTH SCIENCES § 242.2 Applicability. This part applies to the Office of the Secretary of Defense, the Military Departments, the Uniformed Services University of the Health Sciences (USUHS), and the Department of Defense...

Leveraging Information Technology. Track VII: Outstanding Applications.

ERIC Educational Resources Information Center

CAUSE, Boulder, CO.

Eight papers from the 1987 CAUSE conference's Track VII, Outstanding Applications, are presented. They include: "Image Databases in the University" (Reid Kaplan and Gordon Mathieson); "Using Information Technology for Travel Management at the University of Michigan" (Robert E. Russell and John C. Hufziger); "On-Line Access…

Extracurricular activities of medical school applicants.

PubMed

Kim, Sang Hyun

2016-06-01

The purpose of this study was to investigate medical school applicants' involvements in extracurricular activities including medical volunteering/community services, nonmedical community services, club activities, leadership role, and research. Extracurricular characteristics were compared for 448 applicants (223 males and 225 females) who applied to Kangwon Medical School in 2013 to 2014. Frequency analysis, chi-square test, and simple correlation were conducted with the collected data. The 448 applicants participated in medical volunteer/community services (15.3%), nonmedical community services (39.8%), club activities (22.9%), club officials (10%), and research (13.4%). On average, applicants from foreign universities participated in 0.9 medical volunteer/community service, 0.8 nonmedical community service, 1.7 club activities, and 0.6 research work. On the other hand, applicants from domestic universities reported 0.2 medical volunteer/community service, 1.0 nonmedical community service, 0.7 club activity, and 0.3 research. Involvement in extracurricular activities was extensive for medical school applicants. Participation in extracurricular activities differed between applicants from foreign and domestic universities. Females consistently reported greater participation in extracurricular activities than males. The data can be helpful for admission committees to recruit well-rounded applicants and compare between applicants with similar academic backgrounds.

Two-colour live-cell nanoscale imaging of intracellular targets

NASA Astrophysics Data System (ADS)

Bottanelli, Francesca; Kromann, Emil B.; Allgeyer, Edward S.; Erdmann, Roman S.; Wood Baguley, Stephanie; Sirinakis, George; Schepartz, Alanna; Baddeley, David; Toomre, Derek K.; Rothman, James E.; Bewersdorf, Joerg

2016-03-01

Stimulated emission depletion (STED) nanoscopy allows observations of subcellular dynamics at the nanoscale. Applications have, however, been severely limited by the lack of a versatile STED-compatible two-colour labelling strategy for intracellular targets in living cells. Here we demonstrate a universal labelling method based on the organic, membrane-permeable dyes SiR and ATTO590 as Halo and SNAP substrates. SiR and ATTO590 constitute the first suitable dye pair for two-colour STED imaging in living cells below 50 nm resolution. We show applications with mitochondria, endoplasmic reticulum, plasma membrane and Golgi-localized proteins, and demonstrate continuous acquisition for up to 3 min at 2-s time resolution.

Applications of NTNU/SINTEF Drillability Indices in Hard Rock Tunneling

NASA Astrophysics Data System (ADS)

Zare, S.; Bruland, A.

2013-01-01

Drillability indices, i.e., the Drilling Rate Index™ (DRI), Bit Wear Index™ (BWI), Cutter Life Index™ (CLI), and Vickers Hardness Number Rock (VHNR), are indirect measures of rock drillability. These indices are recognized as providing practical characterization of rock properties used in the Norwegian University of Science and Technology (NTNU) time and cost prediction models available for hard rock tunneling and surface excavation. The tests form the foundation of various hard rock equipment capacity and performance prediction methods. In this paper, application of the tests for tunnel boring machine (TBM) and drill and blast (D&B) tunneling is investigated and the impact of the indices on excavation time and costs is presented.

Newton's laws of motion in the form of a Riccati equation.

PubMed

Nowakowski, Marek; Rosu, Haret C

2002-04-01

We discuss two applications of a Riccati equation to Newton's laws of motion. The first one is the motion of a particle under the influence of a power law central potential V(r)=kr(epsilon). For zero total energy we show that the equation of motion can be cast in the Riccati form. We briefly show here an analogy to barotropic Friedmann-Robertson-Lemaitre cosmology where the expansion of the universe can be also shown to obey a Riccati equation. A second application in classical mechanics, where again the Riccati equation appears naturally, are problems involving quadratic friction. We use methods reminiscent to nonrelativistic supersymmetry to generalize and solve such problems.

Application of autonomous robotized systems for the collection of nearshore topographic changing and hydrodynamic measurements

NASA Astrophysics Data System (ADS)

Belyakov, Vladimir; Makarov, Vladimir; Zezyulin, Denis; Kurkin, Andrey; Pelinovsky, Efim

2015-04-01

Hazardous phenomena in the coastal zone lead to the topographic changing which are difficulty inspected by traditional methods. It is why those autonomous robots are used for collection of nearshore topographic and hydrodynamic measurements. The robot RTS-Hanna is well-known (Wubbold, F., Hentschel, M., Vousdoukas, M., and Wagner, B. Application of an autonomous robot for the collection of nearshore topographic and hydrodynamic measurements. Coastal Engineering Proceedings, 2012, vol. 33, Paper 53). We describe here several constructions of mobile systems developed in Laboratory "Transported Machines and Transported Complexes", Nizhny Novgorod State Technical University. They can be used in the field surveys and monitoring of wave regimes nearshore.

An Innovative, Multidisciplinary Educational Program in Interactive Information Storage and Retrieval. M.S. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Gallagher, Mary C.

1985-01-01

There exists a large number of large-scale bibliographic Information Storage and Retrieval Systems containing large amounts of valuable data of interest in a wide variety of research applications. These systems are not used to capacity because the end users, i.e., the researchers, have not been trained in the techniques of accessing such systems. This thesis describes the development of a transportable, university-level course in methods of querying on-line interactive Information Storage and Retrieval systems as a solution to this problem. This course was designed to instruct upper division science and engineering students to enable these end users to directly access such systems. The course is designed to be taught by instructors who are not specialists in either computer science or research skills. It is independent of any particular IS and R system or computer hardware. The project is sponsored by NASA and conducted by the University of Southwestern Louisiana and Southern University.

Measurement of differential cross section of D(3He,p)4He from 0.8 MeV to 3.6 MeV

NASA Astrophysics Data System (ADS)

Zhu, J. P.; Xiao, X.; Yan, S.; Gao, Y.; Xue, J. M.; Wang, Y. G.

2017-12-01

Precise knowledge of the nuclear reaction cross-section is crucial for nuclear reaction analysis methods and its applications. In order to apply nuclear reaction analysis methods to Plasma Facing Materials studies on 4.5 MV electrostatic accelerator at Peking University, differential cross-section for d(3He,p) α at several backward angles was measured with a relative error about ± 6.2 % , gives detailed information at the laboratory angle of 135° from 800 keV to 3600 keV, as well as a rough angular distribution from 130° to 160°.

Universal Three-Qubit Entanglement Generation Based on Linear Optical Elements and Quantum Non-Demolition Detectors

NASA Astrophysics Data System (ADS)

Liu, Xin-Chang

2017-02-01

Recently, entanglement plays an important role in quantum information science. Here we propose an efficient and applicable method which transforms arbitrary three-qubit unknown state to a maximally entangled Greenberger-Horne-Zeilinger state, and the proposed method could be further generalized to multi-qubit case. The proposed setup exploits only linear optical elements and quantum non-demolition detectors using cross-Kerr media. As the quantum non-demolition detection could reveal us the output state of the photons without destroying them. This property may make our proposed setup flexible and can be widely used in current quantum information science and technology.

Health care reform: clarifying the concepts.

PubMed

Miller, A M

1993-01-01

Despite agreement about problems with the health care system, there is disagreement about the remedy. Like most health care reform debates, this article focuses on financing methods rather than service delivery. Reform strategies are intentionally oversimplified into four categories: employer-based or "play or pay"; single-payer and modifications, such as expanding Medicaid or Medicare; market competition; and managed competition, which appears to be favored by the Clinton administration. Cost-control mechanisms and insurance reforms are applicable to all four financing methods. Reform is inevitable. The challenge for nurses is to understand reform issues and then influence policymakers to initiate reforms that make essential medical and preventive services universally available.

An inexpensive and fast method for infiltration coating of complex geometry matrices for ISOL production target applications

NASA Astrophysics Data System (ADS)

Kawai, Y.; Alton, G. D.; Bilheux, J.-C.

2005-12-01

An inexpensive, fast, and close to universal infiltration coating technique has been developed for fabricating fast diffusion-release ISOL targets. Targets are fabricated by deposition of finely divided (∼1 μm) compound materials in a paint-slurry onto highly permeable, complex structure reticulated-vitreous-carbon-foam (RVCF) matrices, followed by thermal heat treatment. In this article, we describe the coating method and present information on the physical integrity, uniformity of deposition, and matrix adherence of SiC, HfC and UC2 targets, destined for on-line use as targets at the Holifield Radioactive Ion Beam Facility (HRIBF).

Molecular processes in astrophysics: Calculations of hydrogen + hydrogen gas excitation, de-excitation, and cooling

NASA Astrophysics Data System (ADS)

Kelley, Matthew Thomas

The implications of H+H2 cooling in astrophysics is important to several applications. One of the most significant and pure applications is its role in cooling in the early universe. Other applications would include molecular dynamics in nebulae and their collapse into stars and astrophysical shocks. Shortly after the big bang, the universe was a hot primordial gas of photons, electrons, and nuclei among other ingredients. By far the most dominant nuclei in the early universe was hydrogen. In fact, in the early universe the matter density was 90 percent hydrogen and only 10 percent helium with small amounts of lithium and deuterium. In order for structure to form in the universe, this primordial gas must form atoms and cool. One of the significant cooling mechanisms is the collision of neutral atomic hydrogen with a neutral diatomic hydrogen molecule. This work performs calculations to determine collisional cooling rates of hydrogen using two potential surfaces.

A heterogeneous computing accelerated SCE-UA global optimization method using OpenMP, OpenCL, CUDA, and OpenACC.

PubMed

Kan, Guangyuan; He, Xiaoyan; Ding, Liuqian; Li, Jiren; Liang, Ke; Hong, Yang

2017-10-01

The shuffled complex evolution optimization developed at the University of Arizona (SCE-UA) has been successfully applied in various kinds of scientific and engineering optimization applications, such as hydrological model parameter calibration, for many years. The algorithm possesses good global optimality, convergence stability and robustness. However, benchmark and real-world applications reveal the poor computational efficiency of the SCE-UA. This research aims at the parallelization and acceleration of the SCE-UA method based on powerful heterogeneous computing technology. The parallel SCE-UA is implemented on Intel Xeon multi-core CPU (by using OpenMP and OpenCL) and NVIDIA Tesla many-core GPU (by using OpenCL, CUDA, and OpenACC). The serial and parallel SCE-UA were tested based on the Griewank benchmark function. Comparison results indicate the parallel SCE-UA significantly improves computational efficiency compared to the original serial version. The OpenCL implementation obtains the best overall acceleration results however, with the most complex source code. The parallel SCE-UA has bright prospects to be applied in real-world applications.

Identifying challenges for academic leadership in medical universities in Iran.

PubMed

Bikmoradi, Ali; Brommels, Mats; Shoghli, Alireza; Khorasani-Zavareh, Davoud; Masiello, Italo

2010-05-01

CONTEXT The crucial role of academic leadership in the success of higher education institutions is well documented. Medical education in Iran has been integrated into the health care system through a complex organisational change. This has called into question the current academic leadership, making Iranian medical universities and schools a good case for exploring the challenges of academic leadership. OBJECTIVES This study explores the leadership challenges perceived by academic managers in medical schools and universities in Iran. METHODS A qualitative study using 18 face-to-face, in-depth interviews with academic managers in medical universities and at the Ministry of Health and Medical Education in Iran was performed. All interviews were recorded digitally, transcribed verbatim and analysed by qualitative content analysis. RESULTS The main challenges to academic leadership could be categorised under three themes, each of which included three sub-themes: organisational issues (inefficacy of academic governance; an overly extensive set of missions and responsibilities; concerns about the selection of managers); managerial issues (management styles; mismatch between authority and responsibilities; leadership capabilities), and organisational culture (tendency towards governmental management; a boss-centred culture; low motivation). CONCLUSIONS This study emphasises the need for academic leadership development in Iranian medical schools and universities. The ability of Iranian universities to grow and thrive will depend ultimately upon the application of leadership skills. Thus, it is necessary to better designate authorities, roles of academic staff and leaders at governance.

7 CFR 3406.1 - Applicability of regulations.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-grant institutions and Tuskegee University under the provisions of section 1417(b)(4) of the National... land-grant colleges and universities, to colleges and universities having significant minority... other colleges and universities having a demonstrable capacity to carry out the teaching of food and...

7 CFR 3406.1 - Applicability of regulations.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-grant institutions and Tuskegee University under the provisions of section 1417(b)(4) of the National... land-grant colleges and universities, to colleges and universities having significant minority... other colleges and universities having a demonstrable capacity to carry out the teaching of food and...

Sounding rocket flight experiment for demonstrating “Furoshiki Satellite” for large phased array antenna

NASA Astrophysics Data System (ADS)

Nakasuka, Shinichi; Funane, Tsukasa; Nakamura, Yuya; Nojiri, Yuta; Sahara, Hironori; Sasaki, Fumiki; Kaya, Nobuyuki

2006-07-01

University of Tokyo and Kobe University are planning a sounding rocket experiment of large membrane "Furoshiki Satellite" extension and large phased array RF transmission. The paper will describe the concept of "Furoshiki Satellite," its application to solar power satellite, and the scenario of micro-gravity experiment using a small sounding rocket. University of Tokyo has been proposing the idea of "Furoshiki Satellite," a large membrane or a net structure, say 1km×1km in size, extended by satellites which hold its corners. The attitude and the shape of the membrane or net structure is controlled by these corner satellites. As one application of Furoshiki Satellite, a large solar power satellite can be configured by several solar cells and RF transmitters placed on several parts of the large net structure. It is difficult to control the position and attitude of the RF transmitters precisely, but using the "retro-directive" method, the tolerance of such position and attitude disturbance will be relaxed by large. This is one of promising systems' concept of the future large solar power satellite or large antenna, because quite a large area can be obtained without any hard structure, and the weight will not depend very much on the size. To demonstrate the feasibility of the extension of large net structure and phased array performance, micro-gravity experiment is planned using a sounding rocket of JAXA/ISAS, Japan.

75 FR 13486 - Application(s) for Duty-Free Entry of Scientific Instruments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-22

... University, One Waterfront Place, PO Box 6024, Morgantown, WV 26506. Instrument: Electron Microscope.... Justification for Duty-Free Entry: There are no domestic manufacturers of this type of electron microscope.... Lawrence University, 23 Romoda Drive, Canton, NY 13617. Instrument: Electron Microscope. Manufacturer: FEI...

A University Admissions System

ERIC Educational Resources Information Center

Ittig, Peter T.

1977-01-01

Presents a mathematical programming model that will make admit/reject decisions for freshman university applicants. The model is intended to aid reviewers in producing better, more consistent decisions. The author shows that a linear programming formulation will provide an efficient and practical solution for all but a very few applicants.…

Science and technology convergence: with emphasis for nanotechnology-inspired convergence

NASA Astrophysics Data System (ADS)

Bainbridge, William S.; Roco, Mihail C.

2016-07-01

Convergence offers a new universe of discovery, innovation, and application opportunities through specific theories, principles, and methods to be implemented in research, education, production, and other societal activities. Using a holistic approach with shared goals, convergence seeks to transcend existing human limitations to achieve improved conditions for work, learning, aging, physical, and cognitive wellness. This paper outlines ten key theories that offer complementary perspectives on this complex dynamic. Principles and methods are proposed to facilitate and enhance science and technology convergence. Several convergence success stories in the first part of the 21st century—including nanotechnology and other emerging technologies—are discussed in parallel with case studies focused on the future. The formulation of relevant theories, principles, and methods aims at establishing the convergence science.

Procedures utilized for obtaining direct and remote atmospheric carbon monoxide measurements over the lower Lake Michigan Basin in August of 1976

NASA Technical Reports Server (NTRS)

Casas, J. C.; Condon, E.; Campbell, S. A.

1978-01-01

In order to establish the applicability of a gas filter correlation radiometer, GFCR, to remote carbon monoxide, CO, measurements on a regional and worldwide basis, Old Dominion University has been engaged in the development of accurate and cost effective techniques for inversion of GFCR CO data and in the development of an independent gas chromatographic technique for measuring CO. This independent method is used to verify the results and the associated inversion method obtained from the GFCR. A description of both methods (direct and remote) will be presented. Data obtained by both techniques during a flight test over the lower Lake Michigan Basin in August of 1976 will also be discussed.

A Method for Semi-quantitative Assessment of Exposure to Pesticides of Applicators and Re-entry Workers: An Application in Three Farming Systems in Ethiopia.

PubMed

Negatu, Beyene; Vermeulen, Roel; Mekonnen, Yalemtshay; Kromhout, Hans

2016-07-01

To develop an inexpensive and easily adaptable semi-quantitative exposure assessment method to characterize exposure to pesticide in applicators and re-entry farmers and farm workers in Ethiopia. Two specific semi-quantitative exposure algorithms for pesticides applicators and re-entry workers were developed and applied to 601 farm workers employed in 3 distinctly different farming systems [small-scale irrigated, large-scale greenhouses (LSGH), and large-scale open (LSO)] in Ethiopia. The algorithm for applicators was based on exposure-modifying factors including application methods, farm layout (open or closed), pesticide mixing conditions, cleaning of spraying equipment, intensity of pesticide application per day, utilization of personal protective equipment (PPE), personal hygienic behavior, annual frequency of application, and duration of employment at the farm. The algorithm for re-entry work was based on an expert-based re-entry exposure intensity score, utilization of PPE, personal hygienic behavior, annual frequency of re-entry work, and duration of employment at the farm. The algorithms allowed estimation of daily, annual and cumulative lifetime exposure for applicators, and re-entry workers by farming system, by gender, and by age group. For all metrics, highest exposures occurred in LSGH for both applicators and female re-entry workers. For male re-entry workers, highest cumulative exposure occurred in LSO farms. Female re-entry workers appeared to be higher exposed on a daily or annual basis than male re-entry workers, but their cumulative exposures were similar due to the fact that on average males had longer tenure. Factors related to intensity of exposure (like application method and farm layout) were indicated as the main driving factors for estimated potential exposure. Use of personal protection, hygienic behavior, and duration of employment in surveyed farm workers contributed less to the contrast in exposure estimates. This study indicated that farmers' and farm workers' exposure to pesticides can be inexpensively characterized, ranked, and classified. Our method could be extended to assess exposure to specific active ingredients provided that detailed information on pesticides used is available. The resulting exposure estimates will consequently be used in occupational epidemiology studies in Ethiopia and other similar countries with few resources. © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

A Step Towards Electric Propulsion Testing Standards: Pressure Measurements and Effective Pumping Speeds

NASA Technical Reports Server (NTRS)

Dankanich, John W.; Swiatek, Michael W.; Yim, John T.

2012-01-01

The electric propulsion community has been implored to establish and implement a set of universally applicable test standards during the research, development, and qualification of electric propulsion systems. Existing practices are fallible and result in testing variations which leads to suspicious results, large margins in application, or aversion to mission infusion. Performance measurements and life testing under appropriate conditions can be costly and lengthy. Measurement practices must be consistent, accurate, and repeatable. Additionally, the measurements must be universally transportable across facilities throughout the development, qualification, spacecraft integration and on-orbit performance. A preliminary step to progress towards universally applicable testing standards is outlined for facility pressure measurements and effective pumping speed calculations. The standard has been applied to multiple facilities at the NASA Glenn Research Center. Test results and analyses of universality of measurements are presented herein.

Universal functions of nuclear proximity potential for Skyrme nucleus-nucleus interaction in a semiclassical approach

NASA Astrophysics Data System (ADS)

Gupta, Raj K.; Singh, Dalip; Kumar, Raj; Greiner, Walter

2009-07-01

The universal function of the nuclear proximity potential is obtained for the Skyrme nucleus-nucleus interaction in the semiclassical extended Thomas-Fermi (ETF) approach. This is obtained as a sum of the spin-orbit-density-independent and spin-orbit-density-dependent parts of the Hamiltonian density, since the two terms behave differently, the spin-orbit-density-independent part mainly attractive and the spin-orbit-density-dependent part mainly repulsive. The semiclassical expansions of kinetic energy density and spin-orbit density are allowed up to second order, and the two-parameter Fermi density, with its parameters fitted to experiments, is used for the nuclear density. The universal functions or the resulting nuclear proximity potential reproduce the 'exact' Skyrme nucleus-nucleus interaction potential in the semiclassical approach, within less than ~1 MeV of difference, both at the maximum attraction and in the surface region. An application of the resulting interaction potential to fusion excitation functions shows clearly that the parameterized universal functions of nuclear proximity potential substitute completely the 'exact' potential in the Skyrme energy density formalism based on the semiclassical ETF method, including also the modifications of interaction barriers at sub-barrier energies in terms of modifying the constants of the universal functions.

SAR-EDU - An education initiative for applied Synthetic Aperture Radar remote sensing

NASA Astrophysics Data System (ADS)

Eckardt, Robert; Richter, Nicole; Auer, Stefan; Eineder, Michael; Roth, Achim; Hajnsek, Irena; Walter, Diana; Braun, Matthias; Motagh, Mahdi; Pathe, Carsten; Pleskachevsky, Andrey; Thiel, Christian; Schmullius, Christiane

2013-04-01

Since the 1970s, radar remote sensing techniques have evolved rapidly and are increasingly employed in all fields of earth sciences. Applications are manifold and still expanding due to the continuous development of new instruments and missions as well as the availability of very high-quality data. The trend worldwide is towards operational employment of the various algorithms and methods that have been developed. However, the utilization of operational services does not keep up yet with the rate of technical developments and the improvements in sensor technology. With the enhancing availability and variety of space borne Synthetic Aperture Radar (SAR) data and a growing number of analysis algorithms the need for a vital user community is increasing. Therefore the German Aerospace Center (DLR) together with the Friedrich-Schiller-University Jena (FSU) and the Technical University Munich (TUM) launched the education initiative SAR-EDU. The aim of the project is to facilitate access to expert knowledge in the scientific field of radar remote sensing. Within this effort a web portal will be created to provide seminar material on SAR basics, methods and applications to support both, lecturers and students. The overall intension of the project SAR-EDU is to provide seminar material for higher education in radar remote sensing covering the topic holistically from the very basics to the most advanced methods and applications that are available. The principles of processing and interpreting SAR data are going to be taught using test data sets and open-source as well as commercial software packages. The material that is provided by SAR-EDU will be accessible at no charge from a DLR web portal. The educational tool will have a modular structure, consisting of separate modules that broach the issue of a particular topic. The aim of the implementation of SAR-EDU as application-oriented radar remote sensing educational tool is to advocate the development and wider use of operational services on the base of pre-existing algorithms and sensors on the one hand, and to aid the extension of radar remote sensing techniques to a broader field of application on the other. SAR-EDU therefore combines the knowledge, expertise and experience of an excellent German consortium.

Even one star at A level could be "too little, too late" for medical student selection

PubMed Central

McManus, Chris; Woolf, Katherine; Dacre, Jane E

2008-01-01

Background More and more medical school applicants in England and Wales are gaining the maximum grade at A level of AAA, and the UK Government has now agreed to pilot the introduction of a new A* grade. This study assessed the likely utility of additional grades of A* or of A**. Methods Statistical analysis of university selection data collected by the Universities and Colleges Admissions Service (UCAS), consisting of data from 1,484,650 applicants to UCAS for the years 2003, 2004 and 2005, of whom 23,628 were medical school applicants, and of these 14,510 were medical school entrants from the UK, aged under 21, and with three or four A level results. The main outcome measure was the number of points scored by applicants in their best three A level subjects. Results Censored normal distributions showed a good fit to the data using maximum likelihood modelling. If it were the case that A* grades had already been introduced, then at present about 11% of medical school applicants and 18% of entrants would achieve the maximum score of 3 A*s. Projections for the years 2010, 2015 and 2020 suggest that about 26%, 35% and 46% of medical school entrants would have 3 A* grades. Conclusion Although A* grades at A level will help in medical student selection, within a decade, a third of medical students will gain maximum grades. While revising the A level system there is a strong argument, as proposed in the Tomlinson Report, for introducing an A** grade. PMID:18394196

Advances in Non-contact Measurement of Creep Properties

NASA Technical Reports Server (NTRS)

Hyers, Robert W.; Canepari, Stacy; Rogers, Jan. R.

2009-01-01

Our team has developed a novel approach to measuring creep at extremely high temperatures using electrostatic levitation (ESL). This method has been demonstrated on niobium up to 2300 C, while ESL has melted tungsten (3400 C). High-precision machined spheres of the sample are levitated in the NASA MSFC ESL, a national user facility, and heated with a laser. The laser is aligned off-center so that the absorbed photons transfer their momentum to the sample, causing it to rotate at up to 250,000+ RPM. The rapid rotation loads the sample through centripetal acceleration, causing it to deform. The deformation of the sample is captured on high-speed video, which is analyzed by machine-vision software from the University of Massachusetts. The deformations are compared to finite element models to determine the constitutive constants in the creep relation. Furthermore, the noncontact method exploits stress gradients within the sample to determine the stress exponent in a single test. This method was validated in collaboration with the University of Tennessee for niobium at 1985 C, with agreement within the uncertainty of the conventional measurements. A similar method is being employed on Ultra-High-Temperature ZrB2- SiC composites, which may see application in rocket nozzles and sharp leading edges for hypersonic vehicles.

Developing a situational judgment test blueprint for assessing the non-cognitive skills of applicants to the University of Utah School of Medicine, the United States

PubMed Central

2015-01-01

Purpose: The situational judgment test (SJT) shows promise for assessing the non-cognitive skills of medical school applicants, but has only been used in Europe. Since the admissions processes and education levels of applicants to medical school are different in the United States and in Europe, it is necessary to obtain validity evidence of the SJT based on a sample of United States applicants. Methods: Ninety SJT items were developed and Kane’s validity framework was used to create a test blueprint. A total of 489 applicants selected for assessment/interview day at the University of Utah School of Medicine during the 2014-2015 admissions cycle completed one of five SJTs, which assessed professionalism, coping with pressure, communication, patient focus, and teamwork. Item difficulty, each item’s discrimination index, internal consistency, and the categorization of items by two experts were used to create the test blueprint. Results: The majority of item scores were within an acceptable range of difficulty, as measured by the difficulty index (0.50-0.85) and had fair to good discrimination. However, internal consistency was low for each domain, and 63% of items appeared to assess multiple domains. The concordance of categorization between the two educational experts ranged from 24% to 76% across the five domains. Conclusion: The results of this study will help medical school admissions departments determine how to begin constructing a SJT. Further testing with a more representative sample is needed to determine if the SJT is a useful assessment tool for measuring the non-cognitive skills of medical school applicants. PMID:26582629