American Society of Civil Engineers | ASCE

Science.gov Websites

Diversity and Inclusion Civil Engineering Salaries Pre-College Outreach Student Resources University Civil Engineering Salaries Support for Students & Teachers Pre-College Outreach Student Resources Ethics Diversity and Inclusion Civil Engineering Salaries Support for Students & Teachers Pre-College

Research on the Mode of University-Enterprise Cooperation to Promote Engineering Students' Employment

NASA Astrophysics Data System (ADS)

Hui, Yan; Lihua, Sun

2018-06-01

The employment of university students has become a hot issue of concern to the whole society. Promoting the employment of university students is a top priority for higher education institutions. University-enterprise cooperation is an important trend in the development of modern higher education. It is also an important channel for promoting the employment of university students, especially for engineering students. Through an in-depth analysis of the status quo of employment of university graduates, this paper proposes four modes of university-enterprise cooperation to promote university graduates' employment: The post-employment cooperation model, the professional internship cooperation model, the second classroom expansion cooperation model and the enterprise-oriented recruitment model, and further proposed the countermeasures to strengthen the cooperation between university and enterprise in order to promote the employment of university students.

Effects of single-gender mathematics classrooms on self-perception of mathematical ability and post secondary engineering paths: an Australian case study

NASA Astrophysics Data System (ADS)

Tully, D.; Jacobs, B.

2010-08-01

This study focused on a population of female engineering students, probing the influences of their secondary school experience on their choice to pursue an engineering course of study at university. The motivating question is: Do unique opportunities exist in an all-female secondary school mathematics classroom, which impact a young woman's self-perception of her mathematics ability as well as promote a positive path towards an engineering-based university major? Using both qualitative and quantitative data collection instruments, this study examined a sample of Australian engineering students enrolled at the University of Technology, Sydney (UTS). Demographic statistics show that 40% of UTS' female engineering student population attended a single-gender secondary school, indicating a potential influence of school type (single-gender) on engineering enrolment patterns. Female students were primarily motivated to pursue a post secondary engineering path because of a self-belief that they are good at mathematics. In contrast, male students were more influenced by positive male role models of family members who are practising engineers. In measures of self- perception of mathematical skill and ability, female students from single-gender schools outscored their male engineering counterparts. Additionally, female students seem to benefit from verbal encouragement, contextualisation, same gender problem-solving groups and same gender classroom dynamics.

Student attraction to engineering through flexibility and breadth in the curriculum

NASA Astrophysics Data System (ADS)

Alpay, E.

2013-03-01

Several European universities provide entry to general engineering studies prior to degree specialisation. The potential advantages of such entry include the provision of a broader foundation in engineering fundamentals, the option for students to defer specialisation until a greater awareness of the different engineering disciplines and the preparation of students for a more versatile career. In this paper, the attractiveness of general engineering (specifically in the first year of study) is explored through a national (UK) survey on pre-university students. Attention is given to gauging student enthusiasm for flexibility in engineering specialisation, combined degree options and exposure to other non-technical courses. The findings indicate that a general engineering programme is highly attractive to students who are currently considering an engineering degree. The programme is also attractive to some students who had previously not considered engineering. For both sets of students, the desire for education on broader topics is indicated, specifically in areas of leadership, teamwork and business skills, and more generally self-awareness and personal development.

New optical engineering and instrument design programs at the University of California, Irvine Extension

NASA Astrophysics Data System (ADS)

Silberman, Donn M.; Doushkina, Valentina V.

2010-08-01

Three years ago we reported on a new optics education program established at the Irvine Center for Applied Competitive Technologies (CACT) at the Advanced Technology and Education Park (ATEP) operated by the South Orange County Community College District (SOCCCD). This paper reports on new Optical Engineering and Instrument Design Programs now being offered through the University of California, Irvine Extension. While there are some similarities between the two programs, the differences are mainly the students' level. The community college level programs were targeted primarily at technicians and junior level engineers. The university level programs are targeted at senior level engineering and physical sciences university students, graduate and post graduate students and designers in industry. This paper reviews the reasons for establishing these certificate programs and their content, the students' motivations for taking them and their employers' incentives for encouraging the students.

Social Cognitive Predictors of Academic Interests and Goals in Engineering: Utility for Women and Students at Historically Black Universities

ERIC Educational Resources Information Center

Lent, Robert W.; Brown, Steven D.; Sheu, Hung-Bin; Schmidt, Janet; Brenner, Bradley R.; Gloster, Clay S.; Wilkins, Gregory; Schmidt, Linda C.; Lyons, Heather

2005-01-01

This study examined the utility of social cognitive career theory (SCCT; R. W. Lent, S. D. Brown, & G. Hackett, 1994) in predicting engineering interests and major choice goals among women and men and among students at historically Black and predominantly White universities. Participants (487 students in introductory engineering courses at 3…

Engineering education research: Impacts of an international network of female engineers on the persistence of Liberian undergraduate women studying engineering

NASA Astrophysics Data System (ADS)

Rimer, Sara; Reddivari, Sahithya; Cotel, Aline

2015-11-01

As international efforts to educate and empower women continue to rise, engineering educators are in a unique position to be a part of these efforts by encouraging and supporting women across the world at the university level through STEM education and outreach. For the past two years, the University of Michigan has been a part of a grassroots effort to encourage and support the persistence of engineering female students at University of Liberia. This effort has led to the implementation of a leadership camp this past August for Liberian engineering undergraduate women, meant to: (i) to empower engineering students with the skills, support, and inspiration necessary to become successful and well-rounded engineering professionals in a global engineering market; and (ii) to strengthen the community of Liberian female engineers by building cross-cultural partnerships among students resulting in a international network of women engineers. This session will present qualitative research findings on the impact of this grassroots effort on Liberian female students? persistence in engineering, and the future directions of this work.

Increasing the Number of Canadian Indigenous Students in STEM at the University of Regina, Saskatchewan, Canada

NASA Astrophysics Data System (ADS)

St-Jacques, J. M.; McGee, S.; Janze, R.; Longman, M.; Pete, S.; Starblanket, N.

2016-12-01

Canadian Indigenous people are an extremely poorly represented group in STEM today due to major barriers in obtaining a high school and then a university education. Approximately 10% of the undergraduate student population out of a total 12,600 students at the University of Regina, Regina, Saskatchewan, is First Nations, Métis or Inuit. The university is located in a catchment region where 30% of the population is First Nations or Métis. Approximately 100 students majoring in the sciences, mathematics and engineering have self-declared themselves to be Indigenous. For the past two years, we have been running a pilot project, the Initiative to Support and Increase the Number of Indigenous Students in the Sciences, Mathematics and Engineering at the Aboriginal Student Centre, with financial support from the Deans of Science and Engineering. We provide student networking lunches, Indigenous scientist and engineer speakers and mentors and supplemental tutoring. Our program is actively supported and guided by Elder Noel Starblanket, former president of the National Indian Brotherhood (now the Assembly of First Nations). Our students are greatly interested in the health and environmental sciences (particularly water quality), with a sprinkling of physics, mathematics and engineering majors. Our students have gone on to graduate work with prestigious scholarships and a paid internship in engineering. We report here on various lessons learned: the involvement of elders is key, as is the acceptance of non-traditional academic paths, and any STEM support program must respect Indigenous culture. There is great interest in science and engineering on the part of these students, if scientists and engineers are willing to listen and learn to talk with these students on their own terms.

Peer-Assisted Learning Programme: Supporting Students in High-Risk Subjects at the Mechanical Engineering Department at Walter Sisulu University

ERIC Educational Resources Information Center

Makola, Qonda

2017-01-01

The majority of the students who enroll at the Walter Sisulu University (WSU) in South Africa are not equipped with the necessary academic/learning skills to cope with the university environment, especially in Mechanical Engineering. The Department of Higher Education and Training (2013, p. 17), further states that "students' support is…

Online-BSEE (Online Bachelor of Science in Electrical Engineering): An Asynchronous Online Electrical Engineering Degree Program with Laboratory

ERIC Educational Resources Information Center

Tang, Wendy; Westgate, Charles; Liu, Pao-Lo; Gouzman, Michael

2014-01-01

The Online Bachelor of Science in Electrical Engineering is a collaborative effort among three University Centers at SUNY (State University of New York), namely Stony Brook, Binghamton, and Buffalo. The program delivers the complete electrical engineering curriculum at the bachelor level to students online and asynchronously. Students, however,…

A Case Study: Problem-Based Learning for Civil Engineering Students in Transportation Courses

ERIC Educational Resources Information Center

Ahern, A. A.

2010-01-01

This paper describes two case studies where problem-based learning (PBL) has been introduced to undergraduate civil engineering students in University College Dublin. PBL has recently been put in place in the penultimate and final year transport engineering classes in the civil engineering degree in University College Dublin. In this case study,…

Hands-on curriculum teaches biomedical engineering concepts to home-schooled students.

PubMed

Sagstetter, Ann M; Nimunkar, Amit J; Tompkins, Willis J

2009-01-01

University level outreach has increased over the last decade to stimulate K-12 student interest in engineering related fields. Home schooling students are one of the groups that are valued for engineering admissions due to diligent study habits and high achievement scores. However, home schooled students have inadequate access to science, math, and engineering related resources, which precludes the development of interdisciplinary teaching methods. To address this problem, we have developed a hands-on, STEM based curriculum as a safe and comprehensive supplement to current home schooling curricula. The ultimate goal is to stimulate university-student relations and subsequently increase engineering recruitment opportunities. Our pre and post workshop survey comparisons demonstrate that integrating disciplines, via the manner presented in this study, provides a K-12 student-friendly engineering learning method.

Trajectories of Electrical Engineering and Computer Engineering Students by Race and Gender

ERIC Educational Resources Information Center

Lord, S. M.; Layton, R. A.; Ohland, M. W.

2011-01-01

Electrical engineering (EE) is one of the largest engineering disciplines. Computer engineering (CpE) has a similar curriculum, but different demographics and student outcomes. Using a dataset from universities in the U.S. that includes over 70,000 students who majored in engineering, this paper describes the outcomes for students matriculating in…

Barriers to student success in engineering education

NASA Astrophysics Data System (ADS)

Boles, Wageeh; Whelan, Karen

2017-07-01

In the UK, the USA and Australia, there have been calls for an increase in the number of engineering graduates to meet the needs of current global challenges. Universities around the world have been grappling with how to both attract more engineering students and to then retain them. Attrition from engineering programmes is disturbingly high. This paper reports on an element of research undertaken through an Australian Learning and Teaching Council-funded Fellowship that investigated the factors leading to student attrition in engineering programmes, by identifying barriers to student success. Here, we contrast a review of the literature related to student barriers and success with student perceptions, gathered through a series of focus groups and interviews at three Australian universities. We also present recommendations for action to try to remove barriers to student success.

Group by Subject or by Ability? Tertiary Mathematics for Engineering Students

ERIC Educational Resources Information Center

Plank, Michael; James, Alex; Hannah, John

2011-01-01

The mathematics topics taught to engineering students at university are ostensibly no different to those taught to mathematics majors, so should these students be taught together or separately? Should engineering students be segregated by ability in their mathematics classes? This study analyses the grades of over 1000 engineering students, and…

Evaluating Risk Awareness in Undergraduate Students Studying Mechanical Engineering

ERIC Educational Resources Information Center

Langdon, G. S.; Balchin, K.; Mufamadi, P.

2010-01-01

This paper examines the development of risk awareness among undergraduate students studying mechanical engineering at a South African university. A questionnaire developed at the University of Liverpool was modified and used on students from the first, second and third year cohorts to assess their awareness in the areas of professional…

Learning from Fellow Engineering Students Who Have Current Professional Experience

ERIC Educational Resources Information Center

Davies, John W.; Rutherford, Ursula

2012-01-01

This paper presents an investigation of how experience-led content in an engineering degree can be strengthened by creating opportunities for engineering students to benefit from the knowledge, skills and resources of students with current professional experience. Students who study civil engineering part-time at Coventry University (while also…

A Ten Year Assessment of the Pre-Engineering Program for Under-Represented, Low Income and/or First Generation College Students at the University of Akron

ERIC Educational Resources Information Center

Lam, Paul C.; Srivatsan, Tirumalai; Doverspike, Dennis; Vesalo, John; Mawasha, P. Ruby

2005-01-01

This paper summarizes the findings of a ten year study on a Pre-Engineering program aimed at dramatically improving both the recruitment and retention of under-represented students pursuing careers in Science, Technology, Engineering and Mathematics (STEM) at The University of Akron. The primary goal of this study was to evaluate The University of…

University of Wyoming, College of Engineering, undergraduate design projects to aid Wyoming persons with disabilities.

PubMed

Barrett, Steven F; Laurin, Kathy M; Bloom, Janet K Chidester

2003-01-01

In Spring 2002 the University of Wyoming received NSF funding from the Division of Bioengineering and Environmental Systems to provide a meaningful design experience for University of Wyoming, College of Engineering students that will directly aid individuals with disabilities within the state of Wyoming. Other universities have participated in this very worthwhile program [1, 2, 3]. To achieve the program purpose, the following objectives were established: Provide engineering students multi-disciplinary, meaningful, community service design projects, Provide persons with disabilities assistive devices to empower them to achieve the maximum individual growth and development and afford them the opportunity to participate in all aspects of life as they choose, Provide engineering students education and awareness on the special needs and challenges of persons with disabilities, and Provide undergraduate engineering students exposure to the biomedical field of engineering. To accomplish these objectives the College of Engineering partnered with three organizations that provide education and service related to disability. Specifically, the college has joined with the Wyoming Institute for Disabilities (WIND) assistive technology program, Wyoming New Options in Technology (WYNOT) and their Sports and Outdoor Assistive Recreation (SOAR) project along with the university's Special Education program. In this paper we will describe how the program was created, developed, and its current status.

Howard University Engineers Success: Interdisciplinary Study Keeps Howard on the Cutting Edge

ERIC Educational Resources Information Center

Chew, Cassie M.

2004-01-01

According to Engineering Workforce Commission annual reports, in 1999 Howard University graduated 108 students, 92 of whom were African American, in its chemical, civil, electrical, and mechanical engineering programs and computer science programs. After two more years of graduating approximately 100 students across programs, in 2002, according to…

Towards a global virtual community of female engineering students and professionals

NASA Astrophysics Data System (ADS)

Cotel, Aline; Rimer, Sara; Reddivari, Sahithya

2014-11-01

ct- The need for strategies to empower Liberian women is exemplified in the recent study carried out by ActionAid International, which examined the state of Liberian undergraduate women in urban areas. The results show that these women often face sexual intimidation by faculty and instructors, women are often excluded from student organizations, there exists a lack of institutional support for female organizations at the universities, and that the women do not feel safe in the university due to low security standards. The situation is even direr for the female engineering students with less than 5% of the engineering student population being women, therefore they are quite isolated in their engineering studies with minimal role models and professional support as they persist. We have planned a leadership camp for female Liberian engineering undergraduate women. The ultimate goal is to empower the Liberian women engineers with the skills, support and inspiration necessary to becoming successful engineering professionals. The leadership camp is planned and facilitated collaboratively by the members of the University of Michigan Society of Women Engineers (UM-SWE) student chapter and the Liberia Society of Women Engineers (L-SWE) student organization. The 2 week-long leadership camp has a workshop-based format with two themes: (i) academic and professional skills, and (ii) student organization development. Funded by UM CRLT, IRWG, STEM Africa.

Introducing Engineering Design through an Intelligent Rube Goldberg Implementation

ERIC Educational Resources Information Center

Acharya, Sushil; Sirinterlikci, Arif

2010-01-01

Engineering students need a head start on designing a component, a process, or a system early in their educational endeavors, and engineering design topics need to be introduced appropriately without negatively affecting students' motivation for engineering. In ENGR1010 at Robert Morris University, freshmen engineering students are introduced to…

Applied aerodynamics experience for secondary science teachers and students

NASA Technical Reports Server (NTRS)

Abbitt, John D., III; Carroll, Bruce F.

1992-01-01

The Department of Aerospace Engineering, Mechanics & Engineering Science at the University of Florida in conjunction with the Alachua County, Florida School Board has embarked on a four-year project of university-secondary school collaboration designed to enhance mathematics and science instruction in secondary school classrooms. The goals are to provide teachers with a fundamental knowledge of flight sciences, and to stimulate interest among students, particularly women and minorities, toward careers in engineering, mathematics, and science. In the first year of the project, all thirteen of the eighth grade physical science teachers and all 1200 of the eighth grade physical science students in the county participated. The activities consisted of a three-day seminar taught at the college level for the teachers, several weeks of classroom instruction for all the students, and an airport field trip for a subgroup of about 430 students that included an orientation flight in a Cessna 172 aircraft. The project brought together large numbers of middle school students, teachers, undergraduate and graduate engineering students, school board administrators, and university engineering faculty.

A Self-Assessment of the Propensity to Obtain Future Employment: A Case of Final-Year Engineering Students at the University of Botswana

ERIC Educational Resources Information Center

Ssegawa, Joseph K.; Kasule, Daniel

2017-01-01

The article provides a self-assessment by final-year engineering students at the University of Botswana regarding the propensity to get employment. Students rated which employability attributes are important, the level of attainment and the sources that have facilitated the development of the attributes. Results indicated that students identified…

Results of Summer Enrichment Program to Promote High School Students' Interest in Engineering

ERIC Educational Resources Information Center

Hart, Brenda; McAnulty, Kate

2014-01-01

For more than thirty years, personnel from the University of Louisville J.B. Speed School of Engineering have presented a summer program targeting high school students historically underrepresented in engineering fields. INSPIRE provides these students with an introduction to careers in engineering and assists the students in planning their…

Engineering Students for the 21st Century: Student Development through the Curriculum

ERIC Educational Resources Information Center

Cheville, Alan; Bunting, Chuck

2011-01-01

Through support of the National Science Foundation's Department Level Reform program, "Engineering Students for the 21st Century" (ES21C) has implemented a ten-course sequence designed to help students develop into engineers. Spread across the Electrical and Computer Engineering (ECE) curriculum at Oklahoma State University, these…

Linking First-Year and Senior Engineering Design Teams: Engaging Early Academic Career Students in Engineering Design

ERIC Educational Resources Information Center

Fox, Garey A.; Weckler, Paul; Thomas, Dan

2015-01-01

In Biosystems Engineering at Oklahoma State University, senior design is a two semester course in which students work on real-world projects provided by clients. First-year (freshmen and trans­fer) students enroll in an introductory engineering course. Historically, these students worked on a team-based analysis project, and the engineering design…

A comparative study of oral health attitudes and behavior using the Hiroshima University-Dental Behavioral Inventory (HU-DBI) between dental and civil engineering students in Colombia.

PubMed

Jaramillo, Jorge A; Jaramillo, Fredy; Kador, Itzjak; Masuoka, David; Tong, Liyue; Ahn, Chul; Komabayashi, Takashi

2013-03-01

The aim of this study was to use the Hiroshima University - Dental Behavioral Inventory (HU-DBI) to compare oral health attitudes and behavior of dental and civil engineering students in Colombia. The HU-DBI's survey consisting of twenty dichotomous responses (agree-disagree) regarding tooth brushing, was completed at University Antonio Narino for the dental students and the University of Cauca for the civil engineering students. The Spanish version of the HU-DBI questionnaire was taken by 182 of 247 dental students and 411 of 762 engineering students. The data was-statistically analyzed by the chi-square test and backward logistic regression. Compared to the engineering students, the dental students were more likely to agree with questions such as "I am bothered by the color of my gums"(OR = 2.2, 95% CI: 1.3-3.7),"I think I can clean my teeth well without using toothpaste" (OR = 3.0, 95% CI: 1.5-5.9), "I have used a dye to see how clean my teeth are" (OR = 2.9, 95% CI: 1.9-4.3), and "I have had my dentist tell me that I brush very well" (OR = 2.0, 95% CI: 1.3-3.1). The dental education curriculum in a dental school compared to a civil engineering school in Colombia indicated that a three-phase curriculum in didactics and clinics increased oral health attitudes and behavior from entry to graduation.

Minority Engineering Program Pipeline: A Proposal to Increase Minority Student Enrollment and Retention in Engineering

NASA Technical Reports Server (NTRS)

Charity, Pamela C.; Klein, Paul B.; Wadhwa, Bhushan

1995-01-01

The Cleveland State University Minority Engineering Program Pipeline consist of programs which foster engineering career awareness, academic enrichment, and professional development for historically underrepresented minority studies. The programs involved are the Access to Careers in Engineering (ACE) Program for high school pre-engineering students: the LINK Program for undergraduate students pursuing degree which include engineering; and the PEP (Pre-calculus Enrichment Program) and EPIC (Enrichment Program in Calculus) mathematics programs for undergraduate academic enrichment. The pipeline is such that high school graduates from the ACE Program who enroll at Cleveland State University in pursuit of engineering degrees are admitted to the LINK Program for undergraduate level support. LINK Program students are among the minority participants who receive mathematics enrichment through the PEP and EPIC Programs for successful completion of their engineering required math courses. THese programs are interdependent and share the goal of preparing minority students for engineering careers by enabling them to achieve academically and obtain college degree and career related experience.

Educational initiative for EE/RE engineering skills: Solar Two student interns. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Norbeck, J.M.

1997-07-01

The US Department of Energy sponsored five student interns from the University of California, Riverside, College of Engineering to work during the summer of 1996 at the Solar Two Energy facility in the Mojave Desert. Through the DOE intern program, engineering students supported the Solar Two Project under the supervision of engineers from Southern California Edison. The prime purpose was to provide outreach and educational support for expanding interactions with university students to increase awareness of careers in renewable energy and energy efficiency fields. The College of Engineering-Center for Environmental Research and Technology (CE-CERT) coordinated this project. CE-CERT is primarilymore » a research facility focusing on air pollution and energy efficiency. CE-CERT serves undergraduate and graduate students by employing them on research projects, supporting them in the research and experimentation required for Senior Design Projects, and sponsoring them in student engineering competitions.« less

Teaching Engineering Ethics to PhD Students: A Berkeley-Delft Initiative : Commentary on "Ethics Across the Curriculum: Prospects for Broader (and Deeper) Teaching and Learning in Research and Engineering Ethics".

PubMed

Taebi, Behnam; Kastenberg, William E

2016-07-13

A joint effort by the University of California at Berkeley and Delft University of Technology to develop a graduate engineering ethics course for PhD students encountered two types of challenges: academic and institutional. Academically, long-term collaborative research efforts between engineering and philosophy faculty members might be needed before successful engineering ethics courses can be initiated; the teaching of ethics to engineering graduate students and collaborative research need to go hand-in-hand. Institutionally, both bottom-up approaches at the level of the faculty and as a joint research and teaching effort, and top-down approaches that include recognition by a University's administration and the top level of education management, are needed for successful and sustainable efforts to teach engineering ethics.

Support for Different Roles in Software Engineering Master's Thesis Projects

ERIC Educational Resources Information Center

Host, M.; Feldt, R.; Luders, F.

2010-01-01

Like many engineering programs in Europe, the final part of most Swedish software engineering programs is a longer project in which the students write a Master's thesis. These projects are often conducted in cooperation between a university and industry, and the students often have two supervisors, one at the university and one in industry. In…

A single instrument: engineering and engineering technology students demonstrating competence in ethics and professional standards.

PubMed

Feldhaus, Charles R; Wolter, Robert M; Hundley, Stephen P; Diemer, Tim

2006-04-01

This paper details efforts by the Purdue School of Engineering and Technology at Indiana University Purdue University Indianapolis (IUPUI) to create a single instrument for honors science, technology, engineering and mathematics (STEM) students wishing to demonstrate competence in the IUPUI Principles of Undergraduate Learning (PUL's) and Accreditation Board for Engineering and Technology (ABET) Engineering Accreditation Criterion (EAC) and Technology Accreditation Criterion (TAC) 2, a through k. Honors courses in Human Behavior, Ethical Decision-Making, Applied Leadership, International Issues and Leadership Theories and Processes were created along with a specific menu of activities and an assessment rubric based on PUL's and ABET criteria to evaluate student performance in the aforementioned courses. Students who complete the series of 18 Honors Credit hours are eligible for an Honors Certificate in Leadership Studies from the Department of Organizational Leadership and Supervision. Finally, an accounting of how various university assessment criteria, in this case the IUPUI Principles of Undergraduate Learning, can be linked to ABET outcomes and prove student competence in both, using the aforementioned courses, menu of items, and assessment rubrics; these will be analyzed and discussed.

Retaining minorities in engineering: Assessment of a program prototype

NASA Astrophysics Data System (ADS)

Good, Jennifer Marie (Phillips)

Program assessment is an essential part of healthy program development. Assessment should include multiple considerations, dimensions, and outcomes that match the program's objectives. As a newly formed retention program, the Auburn University Minority Engineering Program, designed to help pre-engineering minority students make the transition into their freshman year of university studies, incorporated evaluation and assessment into all three components of the program (the interactive learning laboratory, critical-thinking workshops, and Sunday-evening tutorials) from the program's inception. If students successfully adapted to the university environment and the demands of the pre-engineering course of study, then retention of minority students in the College of Engineering should improve. Data were gathered on the students involved in the various program components. Students who entered the Minority Engineering Program were pre- and posttested on three standardized subtests (critical thinking, mathematics, and science reasoning) of the Collegiate Assessment of Academic Proficiency. The first-quarter grade-point averages of the students were also gathered to compare their grades to freshman students in previous quarters within the College of Engineering. Qualitative data were also gathered on this same group of students. An analysis of the data revealed that student achievement is affected by involvement in the Minority Engineering Program. Specifically, the first quarter grade point averages of students involved in the program exceeded those of their peers in earlier years of study prior to the program's existence. In addition, mathematics and science reasoning scores on standardized tests increased pre- to postintervention. Comments collected in journals and files also demonstrated use of critical-thinking and problem-solving skills employed by the students. Recommendations for alterations of the program were made based on the outcome of the program evaluation. Further suggestions for research in minority engineering program development and evaluation were also discussed.

A Methodology for Improving Active Learning Engineering Courses with a Large Number of Students and Teachers through Feedback Gathering and Iterative Refinement

ERIC Educational Resources Information Center

Estévez-Ayres, Iria; Alario-Hoyos, Carlos; Pérez-Sanagustín, Mar; Pardo, Abelardo; Crespo-García, Raquel M.; Leony, Derick; Parada G., Hugo A.; Delgado-Kloos, Carlos

2015-01-01

In the last decade, engineering education has evolved in many ways to meet society demands. Universities offer more flexible curricula and put a lot of effort on the acquisition of professional engineering skills by the students. In many universities, the courses in the first years of different engineering degrees share program and objectives,…

Impacts of Innovativeness and Attitude on Entrepreneurial Intention: Among Engineering and Non-Engineering Students

ERIC Educational Resources Information Center

Law, Kris M. Y.; Breznik, Kristijan

2017-01-01

This study attempted to explore the impacts of attitudinal antecedents on students' entrepreneurial intention. Comparisons between students of engineering and non-engineering backgrounds and gender groups were made. Total of 998 students from universities in Hong Kong were surveyed, leading to a number of highlights in the study. First, it is…

Engineering students' and faculty perceptions of teaching methods and the level of faculty involvement that promotes academic success

NASA Astrophysics Data System (ADS)

Karpilo, Lacy N.

Student academic success is a top priority of higher education institutions in the United States and the trend of students leaving school prior to finishing their degree is a serious concern. Accountability has become a large part of university and college ratings and perceived success. Retention is one component of the accountability metrics used by accreditation agencies. In addition, there are an increasing number of states allocating funds based in part on retention (Seidman, 2005). Institutions have created initiatives, programs, and even entire departments to address issues related to student academic success to promote retention. Universities and colleges have responded by focusing on methods to retain and better serve students. Retention and student academic success is a primary concern for high education institutions; however, engineering education has unique retention issues. The National Science Board (2004) reports a significant decline in the number of individuals in the United States who are training to become engineers, despite the fact that the number of jobs that utilize an engineering background continues to increase. Engineering education has responded to academic success issues by changing curriculum and pedagogical methods (Sheppard, 2001). This descriptive study investigates the perception of engineering students and faculty regarding teaching methods and faculty involvement to create a picture of what is occurring in engineering education. The population was the engineering students and faculty of Colorado State University's College of Engineering. Data from this research suggests that engaging teaching methods are not being used as often as research indicates they should and that there is a lack of student-faculty interaction outside of the classroom. This research adds to the breadth of knowledge and understanding of the current environment of engineering education. Furthermore, the data allows engineering educators and other higher education professionals to gain insight into the teaching methods currently being utilized in engineering and reinforces the importance of student-faculty interaction and thus facilitating the creation of programs or initiatives to improve student academic success.

Engineers without Borders at Montana State University: Student-Led Engagement and Transnational Collaboration

ERIC Educational Resources Information Center

Stein, Otto R.; Schmalzbauer, Leah

2012-01-01

The Montana State University student chapter of Engineers Without Borders USA is a student-managed partnership with the people of Khwisero, Kenya. The primary mission, to bring potable water and clean sanitation facilities to 61 primary schools and the surrounding communities of Khwisero, necessitates a long-term commitment to collaboration and…

The Effect of Individual Learning Styles on Student GPA in Engineering Education at Morgan State University

ERIC Educational Resources Information Center

Hargrove, S. Keith, Sr.; Wheatland, John A.; Ding, Duowen; Brown, Cordelia M.

2008-01-01

The Clarence M. Mitchell School of Engineering at Morgan State University (MSU) is one of nine historically Black colleges and universities with undergraduate engineering programs accredited by the Accreditation Board for Engineering and Technology (ABET). Since 2001, the School of Engineering at MSU has been a participant in a multi-school…

A project to transfer technology from NASA centers in support of industrial innovation in the midwest

NASA Technical Reports Server (NTRS)

Barr, B. G.

1986-01-01

A technology transfer program utilizing graduate students in mechanical engineering at the University of Kansas was initiated in early 1981. The objective of the program was to encourage industrial innovation in the Midwest through improved industry/university cooperation and the utilization of NASA technology. A related and important aspect of the program was the improvement of graduate engineering education through the involvement of students in the identification and accomplishment of technological objectives in cooperation with scientists at NASA centers and engineers in industry. The pilot NASA/University Industrial Innovation Program was an outstanding success based on its ability to: attract top graduate students; secure industry support; and stimulate industry/university cooperation leading to enhanced university capability and utilization of advanced technology by industry.

Building a Community of Scholars: One University's Story of Students Engaged in Learning Science, Mathematics, and Engineering through a NSF S-STEM Grant

ERIC Educational Resources Information Center

Kalevitch, Maria; Maurer, Cheryl; Badger, Paul; Holdan, Greg; Iannelli, Joe; Sirinterlikci, Arif; Semich, George; Bernauer, James

2012-01-01

The School of Engineering, Mathematics, and Science (SEMS) at Robert Morris University (RMU) was awarded a five-year grant from the National Science Foundation (NSF) to fund scholarships to 21 academically talented but financially challenged students majoring in the disciplines of science, technology, engineering, and mathematics (STEM). Each…

The Effects of Individually Prescribed Instruction on Achievement, Self-Concept and Study Orientation Among Engineering Students Enrolled in English Composition at Oklahoma State University.

ERIC Educational Resources Information Center

Minars, Edward J.

This study was concerned with a description of the Pre-Professional Individually Prescribed Instructional (PIPI) model introduced into the curriculum of the College of Engineering at Oklahoma State University and its relationship with achievement, self-concept, and study orientation among freshmen engineering students enrolled in Freshman English…

NASA/USRA University Advanced Design Program Fifth Annual Summer Conference

NASA Technical Reports Server (NTRS)

1989-01-01

The NASA/USRA University Advanced Design Program is a unique program that brings together NASA engineers, students, and faculty from United States engineering schools by integrating current and future NASA space/aeronautics engineering design projects into the university curriculum. The Program was conceived in the fall of 1984 as a pilot project to foster engineering design education in the universities and to supplement NASA's in-house efforts in advanced planning for space and aeronautics design. Nine universities and five NASA centers participated in the first year of the pilot project. Close cooperation between the NASA centers and the universities, the careful selection of design topics, and the enthusiasm of the students has resulted in a very successful program than now includes forty universities and eight NASA centers. The study topics cover a broad range of potential space and aeronautics projects.

A self-assessment of the propensity to obtain future employment: a case of final-year engineering students at the University of Botswana

NASA Astrophysics Data System (ADS)

Ssegawa, Joseph K.; Kasule, Daniel

2017-09-01

The article provides a self-assessment by final-year engineering students at the University of Botswana regarding the propensity to get employment. Students rated which employability attributes are important, the level of attainment and the sources that have facilitated the development of the attributes. Results indicated that students identified the most important attributes as management of time; possessing a high level of technical skills, meeting deadlines and creating viable solutions for solving a problem. They also indicated that they have weaknesses in managing time, meeting deadlines and creating viable solutions (attributes critical to the engineering profession). Students reported that their strengths were in having a positive attitude, orderly physical presentation, adaptation to new environments and willingness to learn new ideas. Students further noted that they developed the attributes from the university academic system followed by their own private activities. The study concludes that students lacked some of the critical attributes of engineering. They therefore, need to be explicitly and holistically sensitised as to how the attributes relate to their profession, employment and career development. As part of the review of the engineering programmes, sensitisation could be included in the induction process at enrolment.

A comparative study of oral health attitudes and behavior using the Hiroshima University - Dental Behavioral Inventory (HU-DBI) between dental and civil engineering students in Colombia

PubMed Central

Jaramillo, Jorge A.; Jaramillo, Fredy; Kador, Itzjak; Masuoka, David; Tong, Liyue; Ahn, Chul; Komabayashi, Takashi

2014-01-01

The aim of this study was to use the Hiroshima University - Dental Behavioral Inventory (HU-DBI) to compare oral health attitudes and behavior of dental and civil engineering students in Colombia. The HU-DBI's survey consisting of twenty dichotomous responses (agree-disagree) regarding tooth brushing, was completed at University Antonio Narino for the dental students and the University of Cauca for the civil engineering students. The Spanish version of the HU-DBI questionnaire was taken by 182 of 247 dental students and 411 of 762 engineering students. The data was-statistically analyzed by the chi-square test and backward logistic regression. Compared to the engineering students, the dental students were more likely to agree with questions such as “I am bothered by the color of my gums”(OR = 2.2, 95% CI: 1.3-3.7),“I think I can clean my teeth well without using toothpaste” (OR = 3.0, 95% CI: 1.5-5.9), “I have used a dye to see how clean my teeth are” (OR = 2.9, 95% CI: 1.9-4.3), and “I have had my dentist tell me that I brush very well” (OR = 2.0, 95% CI: 1.3-3.1). The dental education curriculum in a dental school compared to a civil engineering school in Colombia indicated that a three-phase curriculum in didactics and clinics increased oral health attitudes and behavior from entry to graduation. PMID:23485597

Kuwaiti engineers' perspectives of the engineering senior design (Capstone) course as related to their professional experiences

NASA Astrophysics Data System (ADS)

Alsagheer, Abdullah

This study looks into transfer of learning and its application in the actual employment of engineering students after graduation. At Kuwait University, a capstone course is being offered that aims to ensure that students amalgamate all kinds of engineering skills to apply to their work. Within a basic interpretive, qualitative study-design methodology, I interviewed 12 engineers who have recently experienced the senior design course at Kuwait University and are presently working in industry. From the analysis, four basic themes emerged that further delineate the focus of the entire study. The themes are 1) need for the capstone course, 2) applicability of and problems with the capstone course, 3) industry problems with training, and 4) students' attitudes toward the capstone course. The study concludes that participants are not transferring engineering skills; rather, they are transferring all types of instructions they have been given during their course of study at the university. A frequent statement is that the capstone course should be improved and specifically that it is necessary to improve upon the timing, schedule, teachers' behavior, contents, and format. The study concludes that Kuwaiti engineers on the whole face problems with time management and management support. The study includes some implications for Kuwait University and recommendations that can provide significant support for the development of the Senior Design (Capstone) Course. For examples: the project must be divided into phases to ensure timely completion of deliverables. In order to motivate students for hard work and to achieve true transfer of learning, Kuwait University is required to communicate with certain organizations to place its students at their research centers for capstone projects. All universities, including Kuwait University, should hire faculty specifically to run the capstone course. In conclusion, the study includes some suggestions for further research studies focused on issues related to the Senior Design (Capstone) Course. Future researchers should focus on developing the project-based course in earlier stages of students' educational program by investigating more about the relationship between student achievement and the market demand.

Characteristics of Israeli women studying nursing compared to women studying education and engineering.

PubMed

Horn, H; Holzemer, W L

1991-11-01

This study examined the demographic characteristics, vocational personality, and sex-role orientation of Israeli women studying nursing compared to women studying education and engineering. The convenience sample was 176 university students. The instrument included a demographic inventory, Holland's Self-Directed Search (SDS) questionnaire, and the Sex-Role Orientation Attitude questionnaire. Nursing and education students had Holland's "social" personality types and engineering students were more "realistic" or "investigative". Nursing and engineering students were significantly more feminist in their orientation than education majors. Nursing students were nontraditional women who had traditional family backgrounds, yet were nontraditional in their feminist orientation. With nursing's move into colleges and universities, the need for academically qualified applicants has intensified. Developing a better understanding of the unique nature of nursing and nursing students is a challenge.

Advanced engineering design program at the University of Illinois for the 1987-1988 academic year

NASA Technical Reports Server (NTRS)

Sivier, Kenneth R.; Lembeck, Michael F.

1988-01-01

The participation of the University of Illinois at Urbana-Champaign in the NASA/USRA Universities Advanced Engineering Design Program (Space) is reviewed for the 1987 to 88 academic year. The University's design project was the Manned Marsplane and Delivery System. In the spring of 1988 semester, 107 students were enrolled in the Aeronautical and Astronautical Engineering Departments' undergraduate Aerospace Vehicle Design course. These students were divided into an aircraft section (responsible for the Marsplane design), and a spacecraft section (responsible for the Delivery System Design). The design results are presented in Final Design Reports, copies of which are attached. In addition, five students presented a summary of the design results at the Program's Summer Conference.

Volunteer Expert Readers: Drawing on the University Community to Provide Professional Feedback for Engineering Student Writers

ERIC Educational Resources Information Center

Moskovitz, Cary

2017-01-01

This paper reports on a 3-year study utilizing a novel approach to providing students in an introductory engineering course with feedback on drafts of course writing projects. In the Volunteer Expert Reader (VER) approach, students are matched with university alumni or employees who have the background to give feedback from the perspective of the…

Enhancing Intercultural Competence of Engineering Students via GVT (Global Virtual Teams)-Based Virtual Exchanges: An International Collaborative Course in Intralogistics Education

ERIC Educational Resources Information Center

Wang, Rui; Rechl, Friederike; Bigontina, Sonja; Fang, Dianjun; Günthner, Willibald A.; Fottner, Johannes

2017-01-01

In order to enhance the intercultural competence of engineering students, an international collaborative course in intralogistics education was initiated and realized between the Technical University of Munich in Germany and the Tongji University in China. In this course, students worked in global virtual teams (GVTs) and solved a concrete case…

Gauging Workplace Readiness: Assessing the Information Needs of Engineering Co-op Students

ERIC Educational Resources Information Center

Jeffryes, Jon; Lafferty, Meghan

2012-01-01

Librarians at the Science and Engineering Library at the University of Minnesota surveyed engineering students participating in a work placement as part of the cooperative education program. The survey asked about students' on-the-job information usage, comfort level accessing different types of engineering literature, and experience learning to…

The Accuracy of Student Grading in First-Year Engineering Courses

ERIC Educational Resources Information Center

Van Hattum-Janssen, Natascha; Pacheco, Jose Augusto; Vasconcelos, Rosa Maria

2004-01-01

Assessment has become a powerful tool to change student learning. In a project of the Council of Engineering Courses of the University of Minho, Portugal, students of textile engineering, apparel engineering and industrial electronics increased their participation in every aspect of their assessment process. The traditional exam was changed to…

Summer enrichment partnership (SEP) - society of hispanic professional engineers (SHPE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vela, C.E.

1994-12-31

SEP recruits talented Hispanic high school students in the Washington metropolitan area and seeks to increase the number of Hispanics who enter graduate programs in engineering and science. New students are exposed to engineering, experimental science and business, and visit R&D centers and corporations. Returning students take college level courses, such as Vector-Based Analytic Geometry and Probability and Statistics. Advanced students work on special projects. Hispanic engineers, scientists, and managers offer career guidance. Parental participation is actively encouraged. Students are selected based on: (a) commitment to succeed, (b) academic record, and (c) willingness to attend the program through graduation. Coursesmore » are taught by university faculty, with one teacher assistant per five students. Program evaluation encompasses: (1) student participation and performance, (2) school achievement, and (3) continuation to college. SEP is a partnership between the Society of Hispanic Professional Engineers, The Catholic University of America, NASA, school districts, parents and students, and Hispanic professionals.« less

Predicting Performance in a First Engineering Calculus Course: Implications for Interventions

ERIC Educational Resources Information Center

Hieb, Jeffrey L.; Lyle, Keith B.; Ralston, Patricia A. S.; Chariker, Julia

2015-01-01

At the University of Louisville, a large, urban institution in the south-east United States, undergraduate engineering students take their mathematics courses from the school of engineering. In the fall of their freshman year, engineering students take "Engineering Analysis I," a calculus-based engineering analysis course. After the…

Building a Community of Scholars: One University's Story of Students Engaged in Learning Science, Mathematics, and Engineering through a NSF S-STEM Grant--Part II

ERIC Educational Resources Information Center

Kalevitch, Maria; Maurer, Cheryl; Badger, Paul; Holdan, Greg; Sirinterlikci, Arif

2015-01-01

The School of Engineering, Mathematics, and Science (SEMS) at Robert Morris University (RMU) was awarded a five-year grant from the National Science Foundation (NSF) to fund scholarships to 21 academically talented but financially challenged students majoring in the disciplines of science, technology, engineering, and mathematics (STEM). Each…

A Successful Program for Women Faculty and Graduate Students in Natural Sciences, Mathematics, and Engineering at the University of Nevada, Las Vegas.

ERIC Educational Resources Information Center

Rees, Margaret N. (Peg); Amy, Penny; Jacobson, Ellen; Weistrop, Donna E.

2000-01-01

Introduces a program initiated at the University of Nevada, Las Vegas to stimulate the retention and promotion of women scientists, mathematicians, and engineers and support women graduate students in the same fields. Results of the program suggest that such initiatives can increase the number of women in science, mathematics, and engineering.…

Retention and Recruitment Programs for Female Undergraduate Students in Engineering at The University of Toledo, Ohio, USA

ERIC Educational Resources Information Center

Franchetti, Matthew; Ravn, Tina; Kuntz, Vicki L.

2010-01-01

This paper summarizes the findings of a five year study aimed at improving both recruitment and retention of female students pursuing careers in engineering. The study analyzed a series of five programs implemented at the College of Engineering at The University of Toledo in Ohio, USA. The effectiveness of the programs over time is measured from…

Formula Student as Part of a Mechanical Engineering Curriculum

ERIC Educational Resources Information Center

Davies, Huw Charles

2013-01-01

Formula Student (FS) is a multi-university student design competition managed by the UK Institution of Mechanical Engineers. Students are required to demonstrate and prove their creativity and engineering skills through the design, manufacture and financing of a small formula style race car. This paper seeks to explore the educational value that…

First-Year University Science and Engineering Students' Understanding of Plagiarism

ERIC Educational Resources Information Center

Yeo, Shelley

2007-01-01

This paper is a case study of first-year science and engineering students' understandings of plagiarism. Students were surveyed for their views on scenarios illustrating instances of plagiarism in the context of the academic work and assessment of science and engineering students. The aim was to explore their understandings of plagiarism and their…

United States Air Force Graduate Student Summer Support Program 1986. Program Technical Report. Volume 2

DTIC Science & Technology

1986-12-01

Engineering University of Wisconsin- Madison Mechanics, 1985 Dept. of Engineering Mechanics Specialty: Engineering Mechanics 1415 Johnson Drive Assigned: RPL... Madison , WI 53706 (608) 262-3990 Brian J. Doherty Degree: B.S.E., Bioenginnering, 1984 Duke University Specialty: Bloengineering Biomedical Engineering...Assigned: ML Kent, OH 44242 (216) 672-2246 Gregory L. Walker Degree: B.S., Engineering University of Wisconsin- Madison Mechanics, 1985 Engineering

The Civil Engineering Graduate Program at PUC-Rio: A Brazilian Experience.

ERIC Educational Resources Information Center

Romanel, Celso; Filho, Jose Napoleao

This document discusses the graduate programs in civil engineering at the Pontifical Catholic University of Rio de Janeiro, Brazil, the oldest Brazilian private university. The report features discussions of faculty member backgrounds, trends in student enrollment, women's participation in the program, degree completion, student origins,…

Analysis of the Impact of Introductory Physics on Engineering Students at Texas A&M University

NASA Astrophysics Data System (ADS)

Perry, Jonathan; Bassichis, William

Introductory physics forms a major part of the foundational knowledge of engineering majors, independent of discipline and institution. While the content of introductory physics courses is consistent from institution to institution, the manner in which it is taught can vary greatly due to professor, textbook, instructional method, and overall course design. This work attempts to examine variations in student success, as measured by overall academic performance in an engineering major, and matriculation rates, based on the type of introductory physics a student took while enrolled in an engineering degree at Texas A&M University. Specific options for introductory physics at Texas A&M University include two calculus based physics courses, one traditional (UP), and one more mathematically rigorous (DP), transfer credit, and high school (AP or dual) credit. In order to examine the impact of introductory physics on a student's degree progression, data mining analyses are performed on a data set of relatively comprehensive academic records for all students enrolled as an engineering major for a minimum of one academic term. Student data has been collected for years of entering freshman beginning in 1990 and ending in 2010. Correlations will be examined between freshman level courses, including introductory physics, and follow on engineering courses, matriculation rates, and time to graduation.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 27: The technical communication practices of engineering and science students: Results of the phase 3 academic surveys

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Hecht, Laura M.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of engineers and science (Physics) students. The reported data were obtained from a survey of students enrolled in the College of Engineering at the University of Illinois at Urbana-Champaign, Bowling Green State University, and Texas A&M University. The survey was undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign technical reports; and foreign language (reading and speaking) skills.

Motivational project-based laboratory for a common first year electrical engineering course

NASA Astrophysics Data System (ADS)

Nedic, Zorica; Nafalski, Andrew; Machotka, Jan

2010-08-01

Over the past few years many universities worldwide have introduced a common first year for all engineering disciplines. This is despite the opinion of many academics that large classes have negative effects on the learning outcomes of first year students. The University of South Australia is also faced with low motivation amongst engineering students studying non-major courses. In 2006, a project-based laboratory was successfully introduced for first year students enrolled in electrical disciplines, which increased student satisfaction, reduced the attrition rate and improved students' success rate. This paper presents the experiences with the project-based laboratory's implementation in three different projects in the common first year course, Electrical and Energy Systems, where each project aims to increase the motivation of students in one of three disciplines: electrical, mechanical or civil engineering.

Biomedical engineering education through global engineering teams.

PubMed

Scheffer, C; Blanckenberg, M; Garth-Davis, B; Eisenberg, M

2012-01-01

Most industrial projects require a team of engineers from a variety of disciplines. The team members are often culturally diverse and geographically dispersed. Many students do not acquire sufficient skills from typical university courses to function efficiently in such an environment. The Global Engineering Teams (GET) programme was designed to prepare students such a scenario in industry. This paper discusses five biomedical engineering themed projects completed by GET students. The benefits and success of the programme in educating students in the field of biomedical engineering are discussed.

Perceptions of Female High School Students on Engineering

ERIC Educational Resources Information Center

Madara, Diana Starovoytova; Namango, Sitati

2016-01-01

There is overwhelming evidence that females are underrepresented in engineering worldwide, and Kenya is not an exception. Recent study at School of Engineering (SOE), Moi University (MU) established that engineering parity ration was found to be 1.68 %, meaning that for every 59 students admitted to MU there was only one student admitted to SOE.…

Setting an Egalitarian Social Norm in the Classroom: Improving Attitudes towards Diversity among Male Engineering Students

ERIC Educational Resources Information Center

Bennett, Jill E.; Sekaquaptewa, Denise

2014-01-01

This study tested the effect of a message describing a social norm of egalitarian attitudes and behaviors in an engineering college on male students' attitudes and behavioral intentions surrounding diversity in engineering. Participants were first-semester university students enrolled in four sections of an introductory engineering course in…

The role of a creative "joint assignment" project in biomedical engineering bachelor degree education.

PubMed

Jiehui Jiang; Yuting Zhang; Mi Zhou; Xiaosong Zheng; Zhuangzhi Yan

2017-07-01

Biomedical Engineering (BME) bachelor education aims to train qualified engineers who devote themselves to addressing biological and medical problems by integrating the technological, medical and biological knowledge. Design thinking and teamwork with other disciplines are necessary for biomedical engineers. In the current biomedical engineering education system of Shanghai University (SHU), however, such design thinking and teamwork through a practical project is lacking. This paper describes a creative "joint assignment" project in Shanghai University, China, which has provided BME bachelor students a two-year practical experience to work with students from multidisciplinary departments including sociology, mechanics, computer sciences, business and art, etc. To test the feasibility of this project, a twenty-month pilot project has been carried out from May 2015 to December 2016. The results showed that this pilot project obviously enhanced competitive power of BME students in Shanghai University, both in the capabilities of design thinking and teamwork.

The Students-Recruiting-Students Undergraduate Engineering Recruiting Programme.

ERIC Educational Resources Information Center

Gattis, Carol; Nachtmann, Heather; Youngblood, Alisha D.

2003-01-01

Describes the Students-Recruiting-Students (SRS) program developed to recruit high school students into the Industrial Engineering Department at the University of Arkansas. Presents four phases of the program along with seven years of program results. Encourages successful development of similar recruiting programs. (KHR)

Expose Mechanical Engineering Students to Biomechanics Topics

ERIC Educational Resources Information Center

Shen, Hui

2011-01-01

To adapt the focus of engineering education to emerging new industries and technologies nationwide and in the local area, a biomechanics module has been developed and incorporated into a mechanical engineering technical elective course to expose mechanical engineering students at ONU (Ohio Northern University) to the biomedical engineering topics.…

Hierarchy curriculum for practical skills training in optics and photonics

NASA Astrophysics Data System (ADS)

Zheng, XiaoDong; Wang, XiaoPing; Liu, Xu; Liu, XiangDong; Lin, YuanFang

2017-08-01

The employers in optical engineering fields hope to recruit students who are capable of applying optical principles to solve engineering problems and have strong laboratory skills. In Zhejiang University, a hierarchy curriculum for practical skill training has been constructed to satisfy this demand. This curriculum includes "Introductive practicum" for freshmen, "Opto-mechanical systems design", "Engineering training", "Electronic system design", "Student research training program (SRTP)", "National University Students' Optical-Science-Technology Competition game", and "Offcampus externship". Without cutting optical theory credit hours, this hierarchy curriculum provides a step-by-step solution to enhance students' practical skills. By following such a hierarchy curriculum, students can smoothly advance from a novice to a qualified professional expert in optics. They will be able to utilize optical engineering tools to design, build, analyze, improve, and test systems, and will be able to work effectively in teams to solve problems in engineering and design.

Training of Ability for Engineering Design through Long Term Internship Program

NASA Astrophysics Data System (ADS)

Konishi, Masami; Gofuku, Akio; Tomita, Eiji

The education program for engineering design capabilities through long term internship of Okayama University had started in 2006. The program supported by the MEXT is aimed to educate students in the Graduate School of Natural Science and Technology of Okayama University. The internship satellite laboratory of the University is settled in the near place of collaborative companies in which students are engaged with the project themes extracted from problems in the factory of collaborative companies. Through the program, promotion of abilities for setup and solving a problem considering cost and due date together with performance of the solution. Students are also expected to gain knowledge on patent and ethics required for skillful engineers.

Explore engineering with solar energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davidson, J.H.

1995-11-01

An outreach program was initiated at the University of Minnesota by faculty and student members of the Society of Women Engineers in the spring of 1994 to interest students in 3rd through 9th grade, particularly girls, in careers in engineering. Interaction with elementary and junior high students focuses on hands-on experiences with portable solar devices. This paper reports progress of the program including descriptions of the solar devices, their use in visits to local schools, day visits to the University, and week-long summer camps, and continuing education programs for elementary and secondary school teachers.

Developing Teaching of Mathematics to First Year Engineering Students

ERIC Educational Resources Information Center

Jaworski, Barbara; Matthews, Janette

2011-01-01

Engineering Students Understanding Mathematics (ESUM) is a developmental research project at a UK university. The motivating aim is that engineering students should develop a more conceptual understanding of mathematics through their participation in an innovation in teaching. A small research team has both studied and contributed to innovation,…

Anxiety among Engineering Students in a Graduate EFL Classroom

ERIC Educational Resources Information Center

Samoilova, Valeriia; Thanh, Vo Duy; Wilang, Jeffrey Dawala

2017-01-01

This article reports the descriptive results of foreign language anxiety experiences of engineering students in a top-ranked research university in Thailand. Although numerous studies have been conducted in the past years about English language anxiety, few studies have reported anxiety situations specific to Thai engineering graduate students in…

Engaging Undergraduates in an Interdisciplinary Program: Developing a Biomaterial Technology Program

ERIC Educational Resources Information Center

Liang, Jia-chi; Kung, Shieh-shiuh; Sun, Yi-ming

2009-01-01

Yuan Ze University targeted Biomaterials Science and developed a curriculum related to Biotechnology, Biochemical Engineering, and Biomaterials for engineering students to cultivate talents for both engineering and biotechnology. After several years of operation, recruiting students has succeeded, and students are satisfied with the course design…

Factors Affecting the Performance of Students in University Remedial Mathematics Courses

ERIC Educational Resources Information Center

Aoude, Solange G.

2013-01-01

The importance of mathematics is growing in all scientific and technological fields. Lebanese universities, in particular Notre Dame University-Louaize, require students to take a pool of mathematics courses in their scientific and engineering programs. Based on their scores on the university entrance exam, students accepted to the university…

High school students as science researchers: Opportunities and challenges

NASA Astrophysics Data System (ADS)

Smith, W. R.; Grannas, A. M.

2007-12-01

Today's K-12 students will be the scientists and engineers who bring currently emerging technologies to fruition. Existing research endeavors will be continued and expanded upon in the future only if these students are adequately prepared. High school-university collaborations provide an effective means of recruiting and training the next generation of scientists and engineers. Here, we describe our successful high school-university collaboration in the context of other models. We have developed an authentic inquiry-oriented environmental chemistry research program involving high school students as researchers. The impetus behind the development of this project was twofold. First, participation in authentic research may give some of our students the experience and drive to enter technical studies after high school. One specific goal was to develop a program to recruit underrepresented minorities into university STEM (science, technology, engineering, and mathematics) programs. Second, inquiry-oriented lessons have been shown to be highly effective in developing scientific literacy among the general population of students. This collaboration involves the use of local resources and equipment available to most high schools and could serve as a model for developing high school- university partnerships.

Virtual laboratory learning media development to improve science literacy skills of mechanical engineering students on basic physics concept of material measurement

NASA Astrophysics Data System (ADS)

Jannati, E. D.; Setiawan, A.; Siahaan, P.; Rochman, C.

2018-05-01

This study aims to determine the description of virtual laboratory learning media development to improve science literacy skills of Mechanical Engineering students on the concept of basic Physics. Quasi experimental method was employed in this research. The participants of this research were first semester students of mechanical engineering in Majalengka University. The research instrument was readability test of instructional media. The results of virtual laboratory learning media readability test show that the average score is 78.5%. It indicates that virtual laboratory learning media development are feasible to be used in improving science literacy skill of Mechanical Engineering students in Majalengka University, specifically on basic Physics concepts of material measurement.

Efficiency Assessment of a Blended-Learning Educational Methodology in Engineering

NASA Astrophysics Data System (ADS)

Rogado, Ana Belén González; Conde, Ma José Rodríguez; Migueláñez, Susana Olmos; Riaza, Blanca García; Peñalvo, Francisco José García

The content of this presentation highlights the importance of an active learning methodology in engineering university degrees in Spain. We present of some of the outcomes from an experimental study carried out during the academic years 2007/08 and 2008/09 with engineering students (Technical Industrial Engineering: Mechanics, Civical Design Engineering: Civical building, Technical Architecture and Technical Engineering on Computer Management.) at the University of Salamanca. In this research we select a subject which is common for the four degrees: Computer Science. This study has the aim of contributing to the improvement of education and teaching methods for a better performance of students in Engineering.

Post-Graduation Plans of International Science and Engineering Doctoral Students Attending U.S. Universities

ERIC Educational Resources Information Center

Ugwu, Dorothy N.; Adamuti-Trache, Maria

2017-01-01

This study examines the post-graduation plans of international science and engineering doctoral students at a public research-intensive university, and the extent to which graduate school experiences influence post-graduation plans. The study is grounded in Tinto's Integration Model as well as Berry's Acculturation Model. Study findings highlight…

Employment and Earnings of International Science and Engineering Graduates of U.S. Universities: A Comparative Perspective

ERIC Educational Resources Information Center

Campbell, Throy A.; Adamuti-Trache, Maria; Bista, Krishna

2018-01-01

International students represent a large percentage of the student population in science, technology, engineering, and mathematics (STEM) programs at American colleges and universities. Although graduates of these programs are identified as having high employability, productivity, and earnings in the 21st-century job market, there is limited…

Investigating the Use of Design Methods by Capstone Design Students at Clemson University

ERIC Educational Resources Information Center

Miller, W. Stuart; Summers, Joshua D.

2013-01-01

The authors describe a preliminary study to understand the attitude of engineering students regarding the use of design methods in projects to identify the factors either affecting or influencing the use of these methods by novice engineers. A senior undergraduate capstone design course at Clemson University, consisting of approximately fifty…

University Policies under Varying Market Conditions: The Training of Electrical Engineers.

ERIC Educational Resources Information Center

Eckstein, Zvi; And Others

1988-01-01

Analyzes an Israeli university's problem in optimizing the quality and quantity of electrical engineers in response to fluctuating enrollment. An equilibrium model considers the effect of students' occupation choice and the university's decision on the current and future demand and supply of engineers, in order to predict the equilibrium number of…

Conceptual or procedural mathematics for engineering students at University of Samudra

NASA Astrophysics Data System (ADS)

Saiman; Wahyuningsih, Puji; Hamdani

2017-06-01

This study we investigate whether the emphasis in mathematics courses for engineering students would benefit from being more conceptually oriented than more procedurally oriented way of teaching. In this paper, we report in some detail from twenty-five engineering students comes from three departements ; mechanical engineering, civil engineering and industrial engineering. The aim was to explore different kinds of arguments regarding the role of mathematics in engineering courses, as well as some common across contexts. The result of interview showed that most of engineering students feel that conceptual mathematics is more important than procedural mathematics for their job the future.

[Master course in biomedical engineering].

PubMed

Jobbágy, Akos; Benyó, Zoltán; Monos, Emil

2009-11-22

The Bologna Declaration aims at harmonizing the European higher education structure. In accordance with the Declaration, biomedical engineering will be offered as a master (MSc) course also in Hungary, from year 2009. Since 1995 biomedical engineering course has been held in cooperation of three universities: Semmelweis University, Budapest Veterinary University, and Budapest University of Technology and Economics. One of the latter's faculties, Faculty of Electrical Engineering and Informatics, has been responsible for the course. Students could start their biomedical engineering studies - usually in parallel with their first degree course - after they collected at least 180 ECTS credits. Consequently, the biomedical engineering course could have been considered as a master course even before the Bologna Declaration. Students had to collect 130 ECTS credits during the six-semester course. This is equivalent to four-semester full-time studies, because during the first three semesters the curriculum required to gain only one third of the usual ECTS credits. The paper gives a survey on the new biomedical engineering master course, briefly summing up also the subjects in the curriculum.

The Effects of Students' Course Perceptions on Their Domain Identification, Motivational Beliefs, and Goals

ERIC Educational Resources Information Center

Jones, Brett D.; Tendhar, Chosang; Paretti, Marie C.

2016-01-01

The purpose of this study was to examine whether students' perceptions in a first-year university engineering course affected their engineering identification, motivational beliefs, and engineering major and career goals. Based on current motivation models and theories, we hypothesized that students' perceptions of the components of the MUSIC…

Engineering Education on the "Fuzzy" Front End: A High-Technology Entrepreneurship Model

ERIC Educational Resources Information Center

Crawford, G. P.; Broer, D. J.; Bastiaansen, C. W. M.

2006-01-01

We have developed a university entrepreneurship program, culminating in a prototype and business plan, with five objectives: (1) value for all academic participants' (2) introduction to engineering issues for students; (3) refinement of engineering students' "soft" skills; (4) training for students in creating value out of embryonic ideas; and (5)…

The Role of Entrepreneurship Program Models and Experiential Activities on Engineering Student Outcomes

ERIC Educational Resources Information Center

Duval-Couetil, Nathalie; Shartrand, Angela; Reed, Teri

2016-01-01

Entrepreneurship education is being delivered to greater numbers of engineering students through a variety of courses, programs, and experiential learning activities. Some of these opportunities are designed primarily to serve engineering students in their departments and colleges, while others are cross-campus, university-wide efforts to serve…

International Doctoral Science and Engineering Students: Impact on Cohorts' Career Prospects

ERIC Educational Resources Information Center

Su, Xuhong

2013-01-01

As more international doctoral students flow into science and engineering departments in American research universities, a marked shift on the demographic composition of doctoral student bodies has been witnessed. Using a dataset combining a survey of science and engineering department chairs with the latest department evaluation information, this…

Chinese Engineering Students' Cross-Cultural Adaptation in Graduate School

ERIC Educational Resources Information Center

Jiang, Xinquan

2010-01-01

This study explores cross-cultural adaptation experience of Chinese engineering students in the U.S. I interact with 10 Chinese doctoral students in engineering from a public research university through in-depth interviews to describe (1) their perceptions of and responses to key challenges they encountered in graduate school, (2) their…

Mathematics and Its Value for Engineering Students: What Are the Implications for Teaching?

ERIC Educational Resources Information Center

Harris, Diane; Black, Laura; Hernandez-Martinez, Paul; Pepin, Birgit; Williams, Julian

2015-01-01

Mathematics has long been known to be problematic for university engineering students and their teachers, for example, Scanlan. This paper presents recent data gathered from interviews with engineering students who experienced problems with mathematics and their lecturers during their transition through the first year in different programme…

University Student Perceptions of the Relationship between University Education and the Labour Market in Egypt and Oman

ERIC Educational Resources Information Center

Al-Harthi, Hamood K.

2011-01-01

How do university students perceive the key relationship between their university education and the labour market? This article describes the perceptions that 827 Egyptian and Omani seniors--both males and females, studying commerce, education, and engineering--hold about that relationship. For these students, a major motivation for attending…

The Motivation to Study: An Analysis of Undergraduate Engineering Students at a Caribbean University

ERIC Educational Resources Information Center

Maharaj, Chris; Blair, Erik; Chin Yuen Kee, Sarah

2018-01-01

The link between motivation and success is well documented; however, there is still room to problematise motivation in regards to the individual and contextual levels. This study looks at motivation in relation to students studying undergraduate engineering courses at a Caribbean university and seeks to discover the factors that motivate them to…

A Competency Model for Process Dynamics and Control and Its Use for Test Construction at University Level

ERIC Educational Resources Information Center

Taskinen, Päivi H.; Steimel, Jochen; Gräfe, Linda; Engell, Sebastian; Frey, Andreas

2015-01-01

This study examined students' competencies in engineering education at the university level. First, we developed a competency model in one specific field of engineering: process dynamics and control. Then, the theoretical model was used as a frame to construct test items to measure students' competencies comprehensively. In the empirical…

Problem Based Learning in School of Engineering Science, Osaka University

NASA Astrophysics Data System (ADS)

Sato, Kosuke; Kosakada, Kozo; Kuboi, Ryoichi

Problem Based Leaning in School of Engineering Science, Osaka University is being achieved mainly focusing on the spontaneous setting of the project theme. The PBL program aims to promote students' wide variety of abilities ; communication skill, group discussion, presentation skill, mutual assessment of the students, and also especially research skill 3P (Plan-Perform-Publish) .

Harnessing the Environmental Professional Expertise of Engineering Students--The Course: "Environmental Management Systems in the Industry"

ERIC Educational Resources Information Center

Ben-Zvi-Assaraf, Orit; Ayal, Nitzan

2010-01-01

More and more technical universities now advocate integrating sustainability in higher education and including it as a strategic goal for improving education's quality and relevance to society. This study examines 30 fourth-year chemical engineering students, graduates of a university course designed to combine their terminological domain with…

An Analysis of Stereotype Threat in African American Engineering Students at Predominantly White, Ethnically Diverse, and Historically Black Colleges and Universities

ERIC Educational Resources Information Center

Sparks, David M.

2013-01-01

The purpose of this research was to distinguish the similarities and differences in coping strategies of African American engineering students by analyzing their perceptions of stereotype threat at three academic institution types, Predominantly White Institutions (PWI), ethnically diverse, and Historically Black Colleges and Universities (HBCUs).…

Attracting and Retaining Women Students for Science and Engineering. A Report from the Committee on the Status of Women in Ontario Universities.

ERIC Educational Resources Information Center

Council of Ontario Universities, Toronto.

Though women constitute 53% of students graduating annually from provincially assisted Ontario universities with bachelors and first professional degrees, they tend to remain concentrated in fields more conventionally dominated by females, and their representation in traditionally male disciplines (engineering, applied science, mathematics, and…

An Analysis of Retention Programs for Female Students in Engineering at the University of Toledo

ERIC Educational Resources Information Center

Franchetti, Matthew

2012-01-01

This paper summarizes the findings of a five-year study aimed at improving the retention rates of female students pursuing careers in engineering. The study analyzed a series of programs implemented at the University of Toledo. The programs involve hands-on design projects, research experiences, communication tools geared towards females,…

Encouraging the Learning of Hydraulic Engineering Subjects in Agricultural Engineering Schools

ERIC Educational Resources Information Center

Sinobas, Leonor Rodríguez; Sánchez Calvo, Raúl

2014-01-01

Several methodological approaches to improve the understanding and motivation of students in Hydraulic Engineering courses have been adopted in the Agricultural Engineering School at Technical University of Madrid. During three years student's progress and satisfaction have been assessed by continuous monitoring and the use of…

Student Attraction to Engineering through Flexibility and Breadth in the Curriculum

ERIC Educational Resources Information Center

Alpay, E.

2013-01-01

Several European universities provide entry to general engineering studies prior to degree specialisation. The potential advantages of such entry include the provision of a broader foundation in engineering fundamentals, the option for students to defer specialisation until a greater awareness of the different engineering disciplines and the…

Analysis of forming of students’ professional communication elements on the base of transporting and civil - engineering university according to the requests of potential employers

NASA Astrophysics Data System (ADS)

Solnyshkova, Olga; Makarikhina, Inna

2017-10-01

Prerequisites for students’ professional communication elements forming on the base of civil engineering universities are investigated in the article. Students’ professional communication elements must be used in their future professional activities. The workshop creative experience of interactive electronic educational resources development during the study possesses of geodetic disciplines on the basis of University of Architecture and Civil Engineering (Siberia) is described. The stages of students’ processional communication formation in the process of interactive electronic educational resources creation by students and teachers are proposed. The offers to increase the efficiency of professional communication elements formation for students in the development of interactive electronic educational resources within the student creative workshop were made.

Engineering Education and Students' Challenges: Strategies toward Enhancing the Educational Environment in Engineering Colleges

ERIC Educational Resources Information Center

Alkandari, Nabila Y.

2014-01-01

The main goal of this research is to gain an understanding of the challenges which have to be confronted by the engineering students at the College of Engineering and Petroleum at Kuwait University. The college has a large number of students, of which three hundred and eighty five were selected on a random basis for study purposes. The results…

University Teachers' Perspectives on the Role of the Laplace Transform in Engineering Education

ERIC Educational Resources Information Center

Holmberg, Margarita; Bernhard, Jonte

2017-01-01

The Laplace transform is an important tool in many branches of engineering, for example, electric and control engineering, but is also regarded as a difficult topic for students to master. We have interviewed 22 university teachers from five universities in three countries (Mexico, Spain and Sweden) about their views on relationships among…

Analyzing the Function of Cartilage Replacements: A Laboratory Activity to Teach High School Students Chemical and Tissue Engineering Concepts

ERIC Educational Resources Information Center

Renner, Julie N.; Emady, Heather N.; Galas, Richards J., Jr.; Zhange, Rong; Baertsch, Chelsey D.; Liu, Julie C.

2013-01-01

A cartilage tissue engineering laboratory activity was developed as part of the Exciting Discoveries for Girls in Engineering (EDGE) Summer Camp sponsored by the Women In Engineering Program (WIEP) at Purdue University. Our goal was to increase awareness of chemical engineering and tissue engineering in female high school students through a…

Retrospective Perceptions and Views of Engineering Students about Physics and Engineering Practicals

ERIC Educational Resources Information Center

Bhathal, R.

2011-01-01

Hands-on practical work in physics and engineering has a long and well-established tradition in Australian universities. Recently, however, the question of whether hands-on physics and engineering practicals are useful for engineering students and whether they could be deleted or whether these could be replaced with computer simulations has been…

NASA LeRC/Akron University Graduate Cooperative Fellowship Program and Graduate Student Researchers Program

NASA Technical Reports Server (NTRS)

Fertis, D. G.

1983-01-01

On June 1, 1980, the University of Akron and the NASA Lewis Research Center (LERC) established a Graduate Cooperative Fellowship Program in the specialized areas of Engine Structural Analysis and Dynamics, Computational Mechanics, Mechanics of Composite Materials, and Structural Optimization, in order to promote and develop requisite technologies in these areas of engine technology. The objectives of this program are consistent with those of the NASA Engine Structure Program in which graduate students of the University of Akron participate by conducting research at Lewis. This report is the second on this grant and summarizes the second and third year research effort, which includes the participation of five graduate students where each student selects one of the above areas as his special field of interest. Each student is required to spend 30 percent of his educational training time at the NASA Lewis Research Center and the balance at the University of Akron. His course work is judiciously selected and tailored to prepare him for research work in his field of interest. A research topic is selected for each student while in residence at the NASA Lewis Research Center, which is also approved by the faculty of the University of Akron as his thesis topic for a Master's and/or a Ph.D. degree.

University Nanosatellite Program ION-F Constellation

NASA Technical Reports Server (NTRS)

Swenson, Charles; Fullmer, Rees; Redd, Frank

2002-01-01

The Space Engineering program at Utah State University has developed a small satellite, known as USUSat, under funding from AFOSR, AFRL, NASA and Utah State University's Space Dynamics Laboratory. This satellite was designed and significantly manufactured by students in the Mechanical and Aerospace Engineering and the Electrical and Computer Engineering Departments within the College of Engineering. USUSat is one of three spacecraft being designed for the Ionospheric Observation Nanosatellite Formation (ION- F). This formation comprises three 15 kg. spacecraft designed and built in cooperation by Utah State University, University of Washington, and Virginia Polytechnic Institute. The ION-F satellites are being designed and built by students at the three universities, with close coordination to insure compatibility for launch, deployment, and the formation flying mission. The JON-F mission is part of the U.S. Air Force Research Laboratory (AFRL) University Nanosatellite Program, which provides technology development and demonstrations for the TechSat2l Program. The University Nanosatellite Program involves 10 universities building nanosatellites for a launch in 2004 on two separate space shuttle missions. Additional support for the formation flying demonstration has been provided by NASA's Goddard Space Flight Center.

Case Study of a Small Scale Polytechnic Entrepreneurship Capstone Course Sequence

ERIC Educational Resources Information Center

Webster, Rustin D.; Kopp, Richard

2017-01-01

A multidisciplinary entrepreneurial senior capstone has been created for engineering technology students at a research I land-grant university statewide extension. The two semester course sequence welcomes students from Mechanical Engineering Technology, Electrical Engineering Technology, Computer Graphics Technology, and Organizational…

Academic and Non-Academic Variables Related to Persistence, Transfer, and Attrition of Engineering Students.

ERIC Educational Resources Information Center

Van Erdewyk, Zeno Martin

Identified were characteristics of students who persisted in engineering, transferred to another major, or dropped out of college. Four hundred-thirty freshmen, sophomores, and juniors in the College of Engineering at the University of North Dakota were involved in the study during 1965-66. Data on students included American College Test scores,…

ARO in Review 2012

DTIC Science & Technology

2012-01-01

promotes original research and experimentation in the sciences, engineering, and mathematics at the high school level and publicly recognizes students ...in programs that offered enrichment classes in engineering at universities through the UNITE program. 1,614 middle and high school students ...Research and Engineering Apprenticeship Program (REAP) REAP is designed to offer high school students the opportunity to expand their background and

Exploring University Students' Expectations and Beliefs about Physics and Physics Learning in a Problem-Based Learning Context

ERIC Educational Resources Information Center

Sahin, Mehmet

2009-01-01

This paper reports the results of an exploratory study aimed to determine university students' expectations and beliefs in a problem-based introductory physics course, how those expectations compare to that of students in other universities, and change as a result of one semester of instruction. In total, 264 freshmen engineering students of Dokuz…

Student-driven courses on the social and ecological responsibilities of engineers : commentary on "student-inspired activities for the teaching and learning of engineering ethics".

PubMed

Baier, André

2013-12-01

A group of engineering students at the Technical University of Berlin, Germany, designed a course on engineering ethics. The core element of the developed Blue Engineering course are self-contained teaching-units, "building blocks". These building blocks typically cover one complex topic and make use of various teaching methods using moderators who lead discussions, rather than experts who lecture. Consequently, the students themselves started to offer the credited course to their fellow students who take an active role in further developing the course themselves.

Texas A&M University

ERIC Educational Resources Information Center

Osters, Sandi

2009-01-01

Texas A&M University is a research extensive institution located in College Station. More than 45,000 students attend the university (about 20% are graduate or professional students). Academically, the university is known for its engineering, business, and agricultural and veterinary medicine programs, although there are more than 150 programs…

Campus Climate and the Underrepresented Minority Engineering Student Experience: A Critical Race Study

NASA Astrophysics Data System (ADS)

Mayes, Terrance

In the current technological era, the number of minorities in science, technology, engineering, and mathematics (STEM) is a crucial factor in predetermining the economic growth of the United States. Since the minority population is growing at much faster rates than the non-minority population, the lack of proportionate production of minority engineers poses a threat to the United States' ability to remain a global competitor in technological innovation. Sixty-three per cent (63%) of undergraduate students who enter engineering majors continue on to graduate in that major. The graduation rate, however, for African-American, Hispanic, and Native-American students in engineering is significantly lower at 39%. As this group represents only a small fraction of the annual student enrollment, engineering programs are graduating these minority groups at rates that are greatly disproportionate to United States demographics. Therefore, researchers are thoroughly investigating certain initiatives that promote academic success among underrepresented minority students in engineering. Colleges and universities have attempted to address the growing achievement gap between underrepresented minority and non-minority engineering students, predominately through various deficit-based interventions, focusing on the student's flaws and problems. As the pipeline for minorities in engineering continues to narrow, it begs the question of whether institutions are focusing on the right solutions to the problem. Critical Race Theory scholars argue that colleges and universities must address institutional climate issues around students, such as racism, microaggressions, and marginalization, before members of oppressed groups can truly succeed. This dissertation explored the unique experiences of underrepresented minority engineering students in a predominately White and Asian campus.

Exploring the Academic and Social Experiences of Latino Engineering Community College Transfer Students at a 4-Year Institution: A Qualitative Research Study

NASA Astrophysics Data System (ADS)

Hagler, LaTesha R.

As the number of historically underrepresented populations transfer from community college to university to pursue baccalaureate degrees in science, technology, engineering, and mathematics (STEM), little research exists about the challenges and successes Latino students experience as they transition from 2-year colleges to 4-year universities. Thus, institutions of higher education have limited insight to inform their policies, practices, and strategic planning in developing effective sources of support, services, and programs for underrepresented students in STEM disciplines. This qualitative research study explored the academic and social experiences of 14 Latino engineering community college transfer students at one university. Specifically, this study examined the lived experiences of minority community college transfer students' transition into and persistence at a 4-year institution. The conceptual framework applied to this study was Schlossberg's Transition Theory, which analyzed the participant's social and academic experiences that led to their successful transition from community college to university. Three themes emerged from the narrative data analysis: (a) Academic Experiences, (b) Social Experiences, and (c) Sources of Support. The findings indicate that engineering community college transfer students experience many challenges in their transition into and persistence at 4-year institutions. Some of the challenges include lack of academic preparedness, environmental challenges, lack of time management skills and faculty serving the role as institutional agents.

Teaching Chemical Engineers about Teaching

ERIC Educational Resources Information Center

Heath, Daniel E.; Hoy, Mary; Rathman, James F.; Rohdieck, Stephanie

2013-01-01

The Chemical and Biomolecular Engineering Department at The Ohio State University in collaboration with the University Center for the Advancement of Teaching developed the Chemical Engineering Mentored Teaching Experience. The Mentored Teaching Experience is an elective for Ph.D. students interested in pursuing faculty careers. Participants are…

Supporting the Development of Science Communication Skills in STEM University Students: Understanding Their Learning Experiences as They Work in Middle and High School Classrooms

ERIC Educational Resources Information Center

Grant, Brooke L.; Liu, Xiufeng; Gardella, Joseph A.

2015-01-01

This paper examines the roles that 52 university Science, Technology, Engineering, and Mathematics (STEM) students play in an Interdisciplinary Science and Engineering Partnership that connects several middle schools, high schools, institutions of higher learning, businesses, and community institutions. It also examines the support these students…

Perceptions of Academic Staff towards Accommodating Students with Disabilities in a Civil Engineering Undergraduate Program in a University in South Africa

ERIC Educational Resources Information Center

Mayat, Nafisa; Amosun, Seyi Ladele

2011-01-01

This study explored the perceptions of academic staff towards admission of students with disabilities, and their accommodation once accepted into an undergraduate Civil Engineering program in a South African university. Qualitative responses relating to the perceptions of five academic staff were obtained through semi-structured interviews. The…

Engineering Students Learning Preferences in UNITEN: Comparative Study and Patterns of Learning Styles

ERIC Educational Resources Information Center

Lee, Chen Kang; Sidhu, Manjit Singh

2015-01-01

Engineering educators have been increasingly taking the learning style theories into serious consideration as part of their efforts to enhance the teaching and learning in engineering. This paper presents a research study to investigate the learning style preference of the mechanical engineering students in Universiti Tenaga Nasional (UNITEN),…

Barriers to Student Success in Engineering Education

ERIC Educational Resources Information Center

Boles, Wageeh; Whelan, Karen

2017-01-01

In the UK, the USA and Australia, there have been calls for an increase in the number of engineering graduates to meet the needs of current global challenges. Universities around the world have been grappling with how to both attract more engineering students and to then retain them. Attrition from engineering programmes is disturbingly high. This…

Motivating First-Year University Students by Interdisciplinary Study Projects

ERIC Educational Resources Information Center

Koch, Franziska D.; Dirsch-Weigand, Andrea; Awolin, Malte; Pinkelman, Rebecca J.; Hampe, Manfred J.

2017-01-01

In order to increase student commitment from the beginning of students' university careers, the Technische Universität Darmstadt has introduced interdisciplinary study projects involving first-year students from the engineering, natural, social and history, economics and/or human sciences departments. The didactic concept includes sophisticated…

A Comparative Investigation on the Learning Efficacy of Mechatronic Technology between Academic and Vocational High School Students

ERIC Educational Resources Information Center

Jou, Min; Hung, Chen-Kang; Lai, Shih-Hung

2014-01-01

Universities in Taiwan can be divided into two major categories of comprehensive universities and technological universities. Students studying engineering majors in comprehensive universities are often recruited from academic high schools while those in technological universities tend to be recruited from vocational high schools. The purpose of…

A Case Study of Engineering Ethics

NASA Astrophysics Data System (ADS)

Shimizu, Kazuo

In Engineering Ethics Class at Shizuoka University, the Code of Ethics and Cases for Electrical Engineers by IEEJ Ethics committee is used to promote for high education effect to correspond large number of students (140students). In this paper, a case study in the class, and survey results for ethics value of students are presented. In addition, some comments for role playing act on the case of virtual experiences by students are described.

The University of Connecticut Biomedical Engineering Mentoring Program for high school students.

PubMed

Enderle, John D; Liebler, Christopher M; Haapala, Stephenic A; Hart, James L; Thonakkaraparayil, Naomi T; Romonosky, Laura L; Rodriguez, Francisco; Trumbower, Randy D

2004-01-01

For the past four years, the Biomedical Engineering Program at the University of Connecticut has offered a summer mentoring program for high school students interested in biomedical engineering. To offer this program, we have partnered with the UConn Mentor Connection Program, the School of Engineering 2000 Program and the College of Liberal Arts and Sciences Summer Laboratory Apprentice Program. We typically have approximately 20-25 high school students learning about biomedical engineering each summer. The mentoring aspect of the program exists at many different levels, with the graduate students mentoring the undergraduate students, and these students mentoring the high school students. The program starts with a three-hour lecture on biomedical engineering to properly orient the students. An in-depth paper on an area in biomedical engineering is a required component, as well as a PowerPoint presentation on their research. All of the students build a device to record an EKG on a computer using LabView, including signal processing to remove noise. The students learn some rudimentary concepts on electrocardiography and the physiology and anatomy of the heart. The students also learn basic electronics and breadboarding circuits, PSpice, the building of a printed circuit board, PIC microcontroller, the operation of Multimeters (including the oscilloscope), soldering, assembly of the EKG device and writing LabView code to run their device on a PC. The students keep their EKG device, LabView program and a fully illustrated booklet on EKG to bring home with them, and hopefully bring back to their high school to share their experiences with other students and teachers. The students also work on several other projects during this summer experience as well as visit Hartford Hospital to learn about Clinical Engineering.

NASA Planetary Science Summer School: Preparing the Next Generation of Planetary Mission Leaders

NASA Astrophysics Data System (ADS)

Budney, C. J.; Lowes, L. L.; Sohus, A.; Wheeler, T.; Wessen, A.; Scalice, D.

2010-12-01

Sponsored by NASA’s Planetary Science Division, and managed by the Jet Propulsion Laboratory, the Planetary Science Summer School prepares the next generation of engineers and scientists to participate in future solar system exploration missions. Participants learn the mission life cycle, roles of scientists and engineers in a mission environment, mission design interconnectedness and trade-offs, and the importance of teamwork. For this professional development opportunity, applicants are sought who have a strong interest and experience in careers in planetary exploration, and who are science and engineering post-docs, recent PhDs, and doctoral students, and faculty teaching such students. Disciplines include planetary science, geoscience, geophysics, environmental science, aerospace engineering, mechanical engineering, and materials science. Participants are selected through a competitive review process, with selections based on the strength of the application and advisor’s recommendation letter. Under the mentorship of a lead engineer (Dr. Charles Budney), students select, design, and develop a mission concept in response to the NASA New Frontiers Announcement of Opportunity. They develop their mission in the JPL Advanced Projects Design Team (Team X) environment, which is a cross-functional multidisciplinary team of professional engineers that utilizes concurrent engineering methodologies to complete rapid design, analysis and evaluation of mission concept designs. About 36 students participate each year, divided into two summer sessions. In advance of an intensive week-long session in the Project Design Center at JPL, students select the mission and science goals during a series of six weekly WebEx/telecons, and develop a preliminary suite of instrumentation and a science traceability matrix. Students assume both a science team and a mission development role with JPL Team X mentors. Once at JPL, students participate in a series of Team X project design sessions, during which their mentors aid them in finalizing their mission design and instrument suite, and in making the necessary trade-offs to stay within the cost cap. Tours of JPL facilities highlight the end-to-end life cycle of a mission. At week’s end, students present their Concept Study to a “proposal review board” of JPL scientists and engineers and NASA Headquarters executives, who feed back the strengths and weaknesses of their proposal and mission design. The majority of students come from top US universities with planetary science or engineering programs, such as Brown University, MIT, Georgia Tech, University of Colorado, Caltech, Stanford, University of Arizona, UCLA, and University of Michigan. Almost a third of Planetary Science Summer School alumni from the last 10 years of the program are currently employed by NASA or JPL. The Planetary Science Summer School is implemented by the JPL Education Office in partnership with JPL’s Team X Project Design Center.

Modeling student success in engineering education

NASA Astrophysics Data System (ADS)

Jin, Qu

In order for the United States to maintain its global competitiveness, the long-term success of our engineering students in specific courses, programs, and colleges is now, more than ever, an extremely high priority. Numerous studies have focused on factors that impact student success, namely academic performance, retention, and/or graduation. However, there are only a limited number of works that have systematically developed models to investigate important factors and to predict student success in engineering. Therefore, this research presents three separate but highly connected investigations to address this gap. The first investigation involves explaining and predicting engineering students' success in Calculus I courses using statistical models. The participants were more than 4000 first-year engineering students (cohort years 2004 - 2008) who enrolled in Calculus I courses during the first semester in a large Midwestern university. Predictions from statistical models were proposed to be used to place engineering students into calculus courses. The success rates were improved by 12% in Calculus IA using predictions from models developed over traditional placement method. The results showed that these statistical models provided a more accurate calculus placement method than traditional placement methods and help improve success rates in those courses. In the second investigation, multi-outcome and single-outcome neural network models were designed to understand and to predict first-year retention and first-year GPA of engineering students. The participants were more than 3000 first year engineering students (cohort years 2004 - 2005) enrolled in a large Midwestern university. The independent variables include both high school academic performance factors and affective factors measured prior to entry. The prediction performances of the multi-outcome and single-outcome models were comparable. The ability to predict cumulative GPA at the end of an engineering student's first year of college was about a half of a grade point for both models. The predictors of retention and cumulative GPA while being similar differ in that high school academic metrics play a more important role in predicting cumulative GPA with the affective measures playing a more important role in predicting retention. In the last investigation, multi-outcome neural network models were used to understand and to predict engineering students' retention, GPA, and graduation from entry to departure. The participants were more than 4000 engineering students (cohort years 2004 - 2006) enrolled in a large Midwestern university. Different patterns of important predictors were identified for GPA, retention, and graduation. Overall, this research explores the feasibility of using modeling to enhance a student's educational experience in engineering. Student success modeling was used to identify the most important cognitive and affective predictors for a student's first calculus course retention, GPA, and graduation. The results suggest that the statistical modeling methods have great potential to assist decision making and help ensure student success in engineering education.

Everyday Electrical Engineering: A One-Week Summer Academy Course for High School Students

ERIC Educational Resources Information Center

Mehrizi-Sani, A.

2012-01-01

A summer academy is held for grade 9-12 high school students at the University of Toronto, Toronto, ON, Canada, every year. The academy, dubbed the Da Vinci Engineering Enrichment Program (DEEP), is a diverse program that aims to attract domestic and international high school students to engineering and sciences (and possibly recruit them). DEEP…

The Association between Tolerance for Ambiguity and Fear of Negative Evaluation: A Study of Engineering Technology Capstone Courses

ERIC Educational Resources Information Center

Dubikovsky, Sergey I.

2016-01-01

For many students in engineering and engineering technology programs in the US, senior capstone design courses require students to form a team, define a problem, and find a feasible technical solution to address this problem. Students must integrate the knowledge and skills acquired during their studies at the college or university level. These…

'To Go Boldly': Teaching Science Fiction to First-Year Engineering Students in a South African Context

ERIC Educational Resources Information Center

Manià, Kirby; Mabin, Linda Kathleen; Liebenberg, Jessica

2018-01-01

This paper reflects on the teaching of science fiction texts to first-year engineering students at the University of the Witwatersrand as part of a Critical Thinking course that uses literature as a vehicle through which to develop competence in critical literacy and communication. This course aims to equip engineering students, as future…

Tablet PCs in Engineering Mathematics Courses at the J.B. Speed School of Engineering

ERIC Educational Resources Information Center

Hieb, Jeffrey L.; Ralston, Patricia A. S.

2010-01-01

In fall 2007, J.B. Speed School of Engineering at the University of Louisville joined the ranks of universities requiring the purchase of Tablet PCs for all new entering students. This article presents a description of how the Department of Engineering Fundamentals incorporated Tablet PCs into their instruction, a review of the literature…

Team-Based Programs: The EMP. An Industry/University Partnership-The Educational Model for the 21st Century.

ERIC Educational Resources Information Center

Haynes, Ray; And Others

California Polytechnic State University's College of Business and College of Engineering have joined forces to create a joint Engineering Management Program (EMP). Students holding undergraduate engineering or equivalent degrees enter and earn both Masters in Business Administration and Masters of Science in Engineering in 24 months. The program…

Low-Income Engineering Students: Considering Financial Aid and Differential Tuition

ERIC Educational Resources Information Center

George-Jackson, Casey E.; Rincon, Blanca; Martinez, Mariana G.

2012-01-01

This paper explores the relationship between tuition differentials and low-income students in Engineering fields at two public, research-intensive universities. Although current reports indicate the need for increased participation within the Science, Technology, Engineering, and Mathematics (STEM) fields, rising tuition prices at the university…

The Relationship between Barrier Courses and Persistence in Engineering

ERIC Educational Resources Information Center

Suresh, Radhika

2007-01-01

Attrition in engineering programs continues to be an important issue for universities across the country. This study examined the connection between student performance in barrier courses and persistence in engineering. Quantitative results showed that high school academic experience, student behaviors (including study habits, work habits, coping…

Advising International Students in Engineering Programs: Academic Advisors' Perceptions of Intercultural Communication Competence

ERIC Educational Resources Information Center

Zhang, Yi Leaf; Dinh, Trang V.

2017-01-01

In recent years, an increasing number of international students have enrolled in engineering programs in U.S. colleges and universities. These students often encounter challenges, and academic advisors play a significant role in international students' academic success. Using a model of intercultural communication competence, we explored attitudes…

An Australian Study of Possible Selves Perceived by Undergraduate Engineering Students

ERIC Educational Resources Information Center

Bennett, Dawn; Male, Sally A.

2017-01-01

In this study, we worked with second-year engineering students at an Australian university to examine previously identified threshold concepts within the theoretical framework of Possible Selves. Using workshops as the context for intensive work with students, students were encouraged to consider their future lives and work, including their…

Competition preparation guideline in undergraduate program of information system school of Industrial Engineering Telkom University based on knowledge conversion

NASA Astrophysics Data System (ADS)

Darmawan, F. R.; Soesanto, R. P.; Kurniawati, A.; Kurniawan, M. T.

2017-12-01

The role of higher education in the development of science and technology is not only from the contribution of the high-quality alumni but also from the research and relevant competition with the needs of development in such a country. In a competition, the student can improve their soft skill and academic skill such as analytical and critical thinking, communication skills and mental. The number of relevant competition by students is also included in accreditation clause, therefore student involvement in competition is seen as important for the undergraduate program in University. The most problem in university is the high turnover from the student. Bachelor program in Indonesia usually takes 4 years to complete, and the high turnover causes the student come and go as they are a graduate from the institution without preserving the knowledge and experience from the competition to other students. This research aims to develop a guidance for competition preparation in the university by using knowledge conversion. The object of this research is an information system undergraduate program in the school of industrial engineering Telkom University. The best practice selection is done by using factor rating method. Delphi method is used to identify the criteria, and AHP method is used to calculate the weight of each criterion. From the factor rating result it is known that from 3 respondent, best practice from respondent A (7.321) is used for preparing the programming competition in an undergraduate program of information system in the school of industrial engineering Telkom University. FGD is done to disseminate the selected best practice into the process stakeholder which is head of the student affair of the school of industrial engineering, students, and laboratory assistants. Future research can be done to create more comprehensive criteria for selecting the best practice.

Developing student collaborations across disciplines, distances, and institutions.

PubMed

Knisley, Jeff; Behravesh, Esfandiar

2010-01-01

Because quantitative biology requires skills and concepts from a disparate collection of different disciplines, the scientists of the near future will increasingly need to rely on collaborations to produce results. Correspondingly, students in disciplines impacted by quantitative biology will need to be taught how to create and engage in such collaborations. In response to this important curricular need, East Tennessee State University and Georgia Technological University/Emory University cooperated in an unprecedented curricular experiment in which theoretically oriented students at East Tennessee State designed biophysical models that were implemented and tested experimentally by biomedical engineers at the Wallace H. Coulter Department of Biomedical Engineering at Georgia Technological University and Emory University. Implementing the collaborations between two institutions allowed an assessment of the student collaborations from before the groups of students had met for the first time until after they had finished their projects, thus providing insight about the formation and conduct of such collaborations that could not have been obtained otherwise.

Developing Student Collaborations across Disciplines, Distances, and Institutions

PubMed Central

Behravesh, Esfandiar

2010-01-01

Because quantitative biology requires skills and concepts from a disparate collection of different disciplines, the scientists of the near future will increasingly need to rely on collaborations to produce results. Correspondingly, students in disciplines impacted by quantitative biology will need to be taught how to create and engage in such collaborations. In response to this important curricular need, East Tennessee State University and Georgia Technological University/Emory University cooperated in an unprecedented curricular experiment in which theoretically oriented students at East Tennessee State designed biophysical models that were implemented and tested experimentally by biomedical engineers at the Wallace H. Coulter Department of Biomedical Engineering at Georgia Technological University and Emory University. Implementing the collaborations between two institutions allowed an assessment of the student collaborations from before the groups of students had met for the first time until after they had finished their projects, thus providing insight about the formation and conduct of such collaborations that could not have been obtained otherwise. PMID:20810970

Enhancement of Global Communication Skill at the School of Engineering

NASA Astrophysics Data System (ADS)

Morimura, Kumiko

Globalization is one of the most important challenges for universities. Especially for the School of Engineering, it is crucial to foster researchers or engineers with broader perspective. International communication competency is essential for them in order to deal with other professionals from overseas. Center for Innovation in Engineering Education established in the School of Engineering at the University of Tokyo in 2005 started two programs for graduate and undergraduate students to enhance their international communication competency and to increase international competitiveness. ‘English for Scientists and Engineers A, B’ are for the graduate students to learn how to write papers in English and how to make good presentations. Special English Lessons are for the undergraduate students to have a chance to practice English conversation or prepare for TOEFL test. In this paper, the authors discuss the details of the programs, their purpose and the future tasks.

Field of Study, Learning Styles, and Language Learning Strategies of University Students: Are There Any Relations?

ERIC Educational Resources Information Center

Sahragard, Rahman; Khajavi, Yaser; Abbasian, Reza

2016-01-01

The present study aimed to investigate the possible relationships between field of study, learning style preferences, and language learning strategies among university students majoring in the fields of arts and humanities, science, engineering, social sciences, and English as a foreign language. To this end, 376 university students completed the…

Variations in University Students' Scientific Reasoning Skills across Majors, Years, and Types of Institutions

ERIC Educational Resources Information Center

Ding, Lin; Wei, Xin; Liu, Xiufeng

2016-01-01

This study investigates three aspects--university major, year, and institution type--in relation to student scientific reasoning. Students from three majors (science, engineering, and education), four year levels (years 1 through 4), and two tiers of Chinese universities (tiers 1 and 2) participated in the study. A large-scale written assessment…

Difficulties of Student Teachers in the Engineering Graphics and Design Course at a South African University: Snapshot on Sectional Drawing

ERIC Educational Resources Information Center

Makgato, Moses; Khoza, Samuel D.

2016-01-01

Engineering Graphics and Design (EGD) is a university course that teaches a medium of communication in the form of drawings. This study was undertaken to investigate factors associated with the difficulties experienced by student teachers in the sectional drawing component of the EGD course. Purposive sampling was used to select 40 students…

Teaching-as-Research Internships: A Model for the Development of Future Chemistry Faculty and the Improvement of Teaching in Science, Technology, Engineering, and Math

ERIC Educational Resources Information Center

Gillian-Daniel, Donald L.; Walz, Kenneth A.

2016-01-01

Over the past decade, the University of Wisconsin-Madison (UW-Madison) and Madison Area Technical College (Madison College) partnered to create an internship pathway for graduate students pursuing careers as future science, technology, engineering and math (STEM) faculty members. Since 2003, 10 doctoral students from the university completed…

Some developing concepts of engineering education

NASA Technical Reports Server (NTRS)

Perkins, C. D.

1975-01-01

An analysis of the circumstances which have created a shortage of aeronautical engineering undergraduate students in the universities is presented. Suggestions for motivating students to enter aeronautical engineering are examined. The support of the aeronautical industry for graduate education funding is recommended. Examples of actions taken by governmental agencies to promote increased interest in aeronautical engineering are included.

Biomedical learning experiences for middle school girls sponsored by the Kansas State University Student Chapter of the IEEE EMBS.

PubMed

Gruber, Lucinda; Griffith, Connor; Young, Ethan; Sullivan, Adriann; Schuler, Jeff; Arnold-Christian, Susan; Warren, Steve

2009-01-01

Learning experiences for middle school girls are an effective means to steer young women toward secondary engineering curricula that they might not have otherwise considered. Sponsorship of such experiences by a collegiate student group is worthwhile, as it gives the group common purpose and places college students in a position to mentor these young women. This paper addresses learning experiences in different areas of bio-medical engineering offered to middle school girls in November 2008 via a day-long workshop entitled "Engineering The Body." The Kansas State University (KSU) Student Chapter of the IEEE Engineering in Medicine and Biology Society (EMBS) worked with the KSU Women in Engineering and Science Program (WESP) to design and sponsor these experiences, which addressed the areas of joint mechanics, electrocardiograms, membrane transport, computer mouse design, and audio filters for cochlear implants. Fifty five middle-school girls participated in this event, affirming the notion that biomedical engineering appeals to young women and that early education and recruitment efforts have the potential to expand the biomedical engineering talent pool.

Students' Perception of Live Lectures' Inherent Disadvantages

ERIC Educational Resources Information Center

Petrovic, Juraj; Pale, Predrag

2015-01-01

This paper aims to provide insight into various properties of live lectures from the perspective of sophomore engineering students. In an anonymous online survey conducted at the Faculty of Electrical Engineering and Computing, University of Zagreb, we investigated students' opinions regarding lecture attendance, inherent disadvantages of live…

Soft Skills in the Technology Education Classroom: What Do Students Need?

ERIC Educational Resources Information Center

Harris, Kara S.; Rogers, George E.

2008-01-01

In this article, the authors examine which nontechnical competencies or soft skills related to technology education should be developed by high school students. Results clearly indicate that university-level engineering and engineering technology professors rate students' interpersonal, communication, and work ethic competencies as desired…

Challenges Faced by Female-Students in Engineering-Education

ERIC Educational Resources Information Center

Madara, Diana Starovoytova; Cherotich, Sharon

2016-01-01

Gender-related challenges in learning technical courses are universal phenomenon. These challenges could restrain female students from achieving their fullest potential. The main focus of this study, therefore, is to examine self-recognized challenges faced by undergraduate female students in pursuing engineering at the School of Engineering…

Shaking up Pre-Calculus: Incorporating Engineering into K-12 Curricula

ERIC Educational Resources Information Center

Sabo, Chelsea; Burrows, Andrea; Childers, Lois

2014-01-01

Projects highlighting Science, Technology, Engineering, and Mathematics (STEM) education in high schools have promoted student interest in engineering-related fields and enhanced student understanding of mathematics and science concepts. The Science and Technology Enhancement Program (Project STEP), funded by a NSF GK-12 grant at the University of…

An Integrated Approach to Recruiting and Retaining Appalachian Engineering Students

ERIC Educational Resources Information Center

Winn, Gary; Hensel, Robin; Curtis, Reagan; Taylor, Lydotta M.; Cilento, Gene

2012-01-01

Recruiting and retaining Appalachian engineering students is difficult for a variety of ecological and cultural reasons. At West Virginia University an NSF STEP grant has allowed the development of specific interventions to evolve from an ecological model we describe here. The interventions include web-based, realistic engineering design exercises…

Women Engineering Transfer Students: The Community College Experience

ERIC Educational Resources Information Center

Patterson, Susan J.

2011-01-01

An interpretative philosophical framework was applied to a case study to document the particular experiences and perspectives of ten women engineering transfer students who once attended a community college and are currently enrolled in one of two university professional engineering programs. This study is important because women still do not earn…

Empathy among students in engineering programmes

NASA Astrophysics Data System (ADS)

Rasoal, Chato; Danielsson, Henrik; Jungert, Tomas

2012-10-01

Engineers face challenges when they are to manage project groups and be leaders for organisations because such positions demand skills in social competence and empathy. Previous studies have shown that engineers have low degrees of social competence skills. In this study, the level of empathy as measured by the four subscales of the Interpersonal Reactivity Index, perspective taking, fantasy, empathic distress and empathic concern, among engineering students was compared to students in health care profession programmes. Participants were undergraduate students at Linköping University, 365 students from four different health care profession programmes and 115 students from two different engineering programmes. When the empathy measures were corrected for effects of sex, engineering students from one of the programmes had lower empathy than psychology and social worker students on the fantasy and perspective-taking subscales. These results raise questions regarding opportunities for engineering students to develop their empathic abilities. It is important that engineering students acquire both theoretical and practical knowledge and skills regarding empathy.

Perceptions of Engineering Students, Lecturers and Academic Development Practitioners about Academic Development Classes at a University of Technology

ERIC Educational Resources Information Center

Shange, Thembeka G. C.

2015-01-01

With the increase in student enrolments in higher education, which has resulted in changes to student profiles, academic development has become important in terms of students' success. This article is a report on a qualitative study that used in-depth interviews to investigate the perceptions of Engineering students and staff to academic…

A study of retention of freshmen students in the College of Engineering and Applied Science at the University of Wisconsin-Milwaukee

NASA Astrophysics Data System (ADS)

Johnson, Ester B. Hardy (Simpson)

The University of Wisconsin-Milwaukee (UWM) is part of the University of Wisconsin System. Six of the undergraduate programs are in the College of Engineering and Applied Science (CEAS). The reports and documentation released by the Provost's Office indicate that the retention rate of freshmen to sophomore year students at UWM from 1992 to 1998 is approximately 71%. However, the retention rate of students in CEAS is approximately 41%. This study examined the retention rates of the top 13 schools of engineering listed in the U.S. News & World Report (March 1999) and the Urban 13 List (a list of 21 schools with similar demographics as UWM). The researcher used data from the literature review, advising notes, a one-on-one re-entry contract, evaluations from a freshmen orientation class, a comparison of retention rates and rankings of schools with similar characteristics, interviews with similar schools with high retention rates and the results of survey administered to students in CEAS at UWM, to determine what components impacted or contributed to the success of their freshman year. This data is used to provide measures, strategies, and techniques to improve the retention rate in the College of Engineering and Applied Science at the University of Wisconsin-Milwaukee as well as assisting students in reaching their academic and career goals.

Attitudes and Aspirations Regarding Engineering among Chinese Secondary School Students: Comparisons between Industrialising and Post-Industrial Geo-Engineering Regions of Mainland China and Hong Kong

ERIC Educational Resources Information Center

Kutnick, Peter; Zhu, Zhiyong; Chan, Cecilia; Chan, Rosanna Yuen-Yan; Lee, Betty Pok-Yee; Lai, Veronica Ka Wai

2018-01-01

School-based pipelines/routes for university and technical engineering education are recognised as important for economic development and the high-school years are critical for shaping students' career aspirations and attitudes. This study examined a range of attitudes/experiences on the aspirations of secondary students to pursue engineering…

University Students' Explanatory Models of the Interactions between Electric Charges and Magnetic Fields

ERIC Educational Resources Information Center

Saglam, Murat

2010-01-01

This study aimed to investigate the models that co-existed in students' cognitive structure to explain the interactions between electric charges and uniform magnetic fields. The sample consisted of 129 first-year civil engineering, geology and geophysics students from a large state university in western Turkey. The students answered five…

The Ruptured Pipeline: Analysis of the Mining Engineering Faculty Pipeline

NASA Astrophysics Data System (ADS)

Poulton, M.

2011-12-01

The booming commodities markets of the past seven years have created an enormous demand for economic geologists, mining engineers, and extractive metallurgists. The mining sector has largely been recession proof due to demand drivers coming from developing rather than developed nations. The strong demand for new hires as well as mid-career hires has exposed the weakness of the U.S. university supply pipeline for these career fields. A survey of mining and metallurgical engineering faculty and graduate students was conducted in 2010 at the request of the Society for Mining, Metallurgy, and Exploration. The goals of the surveys were to determine the demographics of the U.S. faculty in mining and metallurgical engineering, the expected faculty turn over by 2010 and the potential supply of graduate students as the future professorate. All Mining Engineering and Metallurgical Engineering degrees in the U.S. are accredited by the Accreditation Board for Engineering and Technology (ABET) and the specific courses required are set by the sponsoring professional society, Society for Mining, Metallurgy, and Exploration. There are 13 universities in the U.S. that offer a degree in Mining Engineering accredited as Mining Engineering and 1 university that grants a Mining Engineering degree accredited under general engineering program requirements. Faculty numbers are approximately 87 tenure track positions with a total undergraduate enrollment of slightly over 1,000 in the 2008-2009 academic year. There are approximately 262 graduate students in mining engineering in the U.S. including 87 Ph.D. students. Mining Engineering department heads have identified 14 positions open in 2010 and 18 positions expected to be open in the next 5 years and an additional 21 positions open by 2020. The current survey predicts a 56% turn over in mining faculty ranks over the next 10 years but a retirement of 100% of senior faculty over 10 years. 63% of graduate students say they are interested in a university career at some point in their lives but only 6% of the PhD respondents had applied for the open positions. 69% of Ph.D. students in the survey had graduation dates that would have made them eligible to apply for the open positions. 51% of the responding graduate students are US citizens. Full time graduate student enrollment would have to increase by 75% in order to provide enough graduate students to meet tenure and promotion expectations for mining engineering faculty in the U.S. New research funding on the order of $17M per year would have to be supplied to sustain the mining engineering faculty at a level expected of most R1 engineering colleges. Salaries for new faculty hires are comparable to those offered to BSc graduates by industry. The difficulties in achieving tenure due to lack of government research funding have made academic careers unattractive. If a solution is not found soon to refill the faculty pipeline, the U.S. is in danger of losing nearly all of its capacity to educate students in mining engineering.

Searching for a New Way to Reach Patrons: A Search Engine Optimization Pilot Project at Binghamton University Libraries

ERIC Educational Resources Information Center

Rushton, Erin E.; Kelehan, Martha Daisy; Strong, Marcy A.

2008-01-01

Search engine use is one of the most popular online activities. According to a recent OCLC report, nearly all students start their electronic research using a search engine instead of the library Web site. Instead of viewing search engines as competition, however, librarians at Binghamton University Libraries decided to employ search engine…

Currently available medical engineering degrees in the UK. Part 2: Postgraduate degrees.

PubMed

Joyce, T

2009-05-01

This paper considers taught medical engineering MSc degrees, based on mechanical engineering, which are provided in the UK. Currently there are 19 institutions which provide such postgraduate degree programmes. These are the University of Aberdeen, University of Bath, University of Bradford, Brunel University, University of Dundee, University of Hull, Imperial College London, Keele University, King's College London, University of Leeds, University of Liverpool, University of Nottingham, University of Oxford, Queen Mary University of London, University of Southampton, University of Strathclyde, University of Surrey, University of Ulster, and University of Warwick. While most courses are delivered on a 1 year full-time basis, other delivery modes are also available. Relatively few modules are offered as distance learning or short courses. A wide range of modules are offered by the various universities for the different taught MSc degrees. Common modules include biomaterials and biomechanics. The medical-engineering-related modules offered by a number of universities are also made available to students on allied MSc programmes and undergraduate degrees in medical engineering.

Perception of Leadership in Electrical Engineering Students, UTHM

ERIC Educational Resources Information Center

Saari, Farrah Atikah Binti; Ghani, Nor Aslasiah Binti

2015-01-01

Demand for graduates with leadership skills more in priority to meet the needs of human resources. Hence, this study was undertaken to investigate the level of leadership skills among students in Electrical Engineering at University Tun Hussein Onn Malaysia. Descriptive study carried out to evaluate student leadership. The study sample consisted…

Engineering Research Teams: The Role of Social Networks in the Formation of Research Skills for Postgraduate Students

ERIC Educational Resources Information Center

Sampson, Kaylene; Comer, Keith

2011-01-01

This study explores learner experiences regarding skills acquisition of a cohort of engineering doctoral students enrolled in a New Zealand university. Employing a qualitative methodology, we interviewed 28 PhD students about the range of experiences and exchanges that comprised their pathways to skill acquisition. Students reported that research…

The Challenge of Induction! Introducing Engineering Students to Higher Education: A Task-Oriented Approach.

ERIC Educational Resources Information Center

Edward, Norrie; Middleton, June

2002-01-01

First-year engineering students at Robert Gordon University (Scotland) were presented with a task-oriented induction program. Students were divided into groups and assigned a facilitator, later personal tutor, to whom they could refer. Student reaction to the experience was very favorable. Effect on progression rates is yet to be determined. (AEF)

Implementing Vertical and Horizontal Engineering Students' Integration and Assessment of Consequence Academic Achievement

ERIC Educational Resources Information Center

Al-Zubaidy, Sarim; Abdulaziz, Nidhal; Dashtpour, Reza

2012-01-01

Recent scholarship references indicate that integration of the student body can result in an enhanced learning experience for students and also greater satisfaction. This paper reports the results of a case study whereby mechanical engineering students studying at a newly established branch campus in Dubai of a British university were exposed to…

Learning English: Experiences and Needs of Saudi Engineering Students

ERIC Educational Resources Information Center

Unruh, Susan; Obeidat, Fayiz

2015-01-01

In this qualitative study, Saudi engineering students talk openly of their experiences learning English in the Kingdom of Saudi Arabia (KSA) and as university students in the United States (US). These students reported that they learned only the basics of vocabulary and grammar in KSA. Consequently, they came to the US with few English skills. In…

Explaining student success in engineering education at Delft University of Technology: a literature synthesis

NASA Astrophysics Data System (ADS)

van den Bogaard, M.

2012-03-01

Student success is among the most widely researched areas in tertiary education. Generalisability of research in this field is problematic due to cultural and structural differences between countries, institutions and programmes where the research is done. Engineering education in the Netherlands has not been studied in depth. In this paper, outcomes of studies done outside and inside engineering and outside and inside the Netherlands are discussed to help understand the complexity of student retention issues. Although generalisation is an issue, there are a number of concepts and variables that surface in many of these studies, including students' background and disposition variables, education attributes, variables concerning educational climate and student behaviour. How these variables are related and how a university can apply the outcomes of research in this field of study are discussed in this paper.

a Study of Women Engineering Students and Time to Completion of First-Year Required Courses at Texas A&M University

NASA Astrophysics Data System (ADS)

Kimball, Jorja; Cole, Bryan; Hobson, Margaret; Watson, Karan; Stanley, Christine

This paper reports findings on gender that were part of a larger study reviewing time to completion of course work that includes the first two semesters of calculus, chemistry, and physics, which are often considered the stumbling points or "barrier courses" to an engineering baccalaureate degree. Texas A&M University terms these courses core body of knowledge (CBK), and statistical analysis was conducted on two cohorts of first-year enrolling engineering students at the institution. Findings indicate that gender is statistically significantly related to completion of CBK with female engineering students completing required courses faster than males at the .01 level (p = 0.008). Statistical significance for gender and ethnicity was found between white male and white female students at the .01 level (p = 0.008). Descriptive analysis indicated that of the five majors studied (chemical, civil, computer, electrical, and mechanical engineering), women completed CBK faster than men, and African American and Hispanic women completed CBK faster than males of the same ethnicity.

Large-scale visualization projects for teaching software engineering.

PubMed

Müller, Christoph; Reina, Guido; Burch, Michael; Weiskopf, Daniel

2012-01-01

The University of Stuttgart's software engineering major complements the traditional computer science major with more practice-oriented education. Two-semester software projects in various application areas offered by the university's different computer science institutes are a successful building block in the curriculum. With this realistic, complex project setting, students experience the practice of software engineering, including software development processes, technologies, and soft skills. In particular, visualization-based projects are popular with students. Such projects offer them the opportunity to gain profound knowledge that would hardly be possible with only regular lectures and homework assignments.

NASA's Robotics Mining Competition Provides Undergraduates Full Life Cycle Systems Engineering Experience

NASA Technical Reports Server (NTRS)

Stecklein, Jonette

2017-01-01

NASA has held an annual robotic mining competition for teams of university/college students since 2010. This competition is yearlong, suitable for a senior university engineering capstone project. It encompasses the full project life cycle from ideation of a robot design to actual tele-operation of the robot in simulated Mars conditions mining and collecting simulated regolith. A major required element for this competition is a Systems Engineering Paper in which each team describes the systems engineering approaches used on their project. The score for the Systems Engineering Paper contributes 25% towards the team's score for the competition's grand prize. The required use of systems engineering on the project by this competition introduces the students to an intense practical application of systems engineering throughout a full project life cycle.

Kuwaiti Engineers' Perspectives of the Engineering Senior Design (Capstone) Course as Related to Their Professional Experiences

ERIC Educational Resources Information Center

AlSagheer, Abdullah

2010-01-01

This study looks into transfer of learning and its application in the actual employment of engineering students after graduation. At Kuwait University, a capstone course is being offered that aims to ensure that students amalgamate all kinds of engineering skills to apply to their work. Within a basic interpretive, qualitative study-design…

Engaging High School and Engineering Students: A Multifaceted Outreach Program Based on a Mechatronics Platform

ERIC Educational Resources Information Center

Habash, Riadh W. Y.; Suurtamm, Christine

2010-01-01

If we aim to enhance the interest of students in engineering and therefore produce the best engineers, it is essential to strengthen the pipeline to high school education. This paper discusses several outreach activities undertaken by the Faculty of Engineering and Faculty of Education, University of Ottawa (UO), Ottawa, ON, Canada, to help the…

Teaching Sustainable Entrepreneurship to Engineering Students: The Case of Delft University of Technology

ERIC Educational Resources Information Center

Bonnet, Hans; Quist, Jaco; Hoogwater, Daan; Spaans, Johan; Wehrmann, Caroline

2006-01-01

Sustainability, enhancement of personal skills, social aspects of technology, management and entrepreneurship are of increasing concern for engineers and therefore for engineering education. In 1996 at Delft University of Technology this led to the introduction of a subject on sustainable entrepreneurship and technology in the course programmes of…

Foreign Science and Engineering Doctoral Attainment at American Universities

ERIC Educational Resources Information Center

Hamilton, Robert V.

2010-01-01

This dissertation analyzes the nearly 100,000 foreign students who attained science and engineering (S&E) doctorates in the five fields of physical sciences, life sciences, engineering, mathematics and computer sciences, and social and behavioral sciences at American universities from 1994 to 2005. Two models are presented. In the first model…

Technology Education to Engineering: A Good Move?

ERIC Educational Resources Information Center

Williams, P. John

2010-01-01

Recent curriculum changes in the educational system of Australia have resulted in allowing optional Engineering course work to count for university entrance for students choosing to apply to a university. In other educational systems, Engineering is playing an increasingly important role, either as a stand-alone subject or as part of an integrated…

European virtual campus for biomedical engineering EVICAB.

PubMed

Malmivuo, Jaakko A; Nousiainen, Juha O; Lindroos, Kari V

2007-01-01

European Commission has funded building a curriculum on Biomedical Engineering to the Internet for European universities under the project EVICAB. EVICAB forms a curriculum which will be free access and available free of charge. Therefore, in addition to the European universities, it will be available worldwide. EVICAB will make high quality education available for everyone, not only for the university students, and facilitate the development of the discipline of Biomedical Engineering.

Challenge-based instruction in biomedical engineering: a scalable method to increase the efficiency and effectiveness of teaching and learning in biomedical engineering.

PubMed

Harris, Thomas R; Brophy, Sean P

2005-09-01

Vanderbilt University, Northwestern University, the University of Texas and the Harvard/MIT Health Sciences Technology Program have collaborated since 1999 to develop means to improve bioengineering education. This effort, funded by the National Science Foundation as the VaNTH Engineering Research Center in Bioengineering Educational Technologies, has sought a synthesis of learning science, learning technology, assessment and the domains of bioengineering in order to improve learning by bioengineering students. Research has shown that bioengineering educational materials may be designed to emphasize challenges that engage the student and, when coupled with a learning cycle and appropriate technologies, can lead to improvements in instruction.

An appraisal of an online tutorial system for the teaching and learning of engineering physics in conjunction with contextual physics and mathematics, and relevant mathematics

NASA Astrophysics Data System (ADS)

Bhathal, Ragbir

2016-09-01

The number of students entering engineering schools in Australian universities has increased tremendously over the last few years because of the Australian Federal Government's policy of increasing the participation rates of Higher School Certificate students and students from low social economic status backgrounds in the tertiary sector. They now come with a diverse background of skills, motivations and prior knowledge. It is imperative that new methods of teaching and learning be developed. This paper describes an online tutorial system used in conjunction with contextual physics and mathematics, and the revision of the relevant mathematical knowledge at the appropriate time before a new topic is introduced in the teaching and learning of engineering physics. Taken as a whole, this study shows that students not only improved their final examination results but there was also an increase in the retention rate of first-year engineering students which has financial implications for the university.

Temperament in Portuguese university students as measured by TEMPS-A: implications for professional choice.

PubMed

Figueira, M Luisa; Caeiro, Lara; Ferro, Ana; Cordeiro, Raul; Duarte, Pedro M; Akiskal, Hagop S; Akiskal, Kareen K

2010-06-01

The structure of temperament displays subaffective traits as attributes of adaptive value. There are few studies on how different professions compare on temperaments. Our aim was to examine the relationship between the choices of Portuguese students in their fields of study, and their respective temperaments. The sample included 1386 students from six different universities (law, engineering, arts, medicine, psychology, and nursing), of both genders (67% female), and ages between 17 and 58 (X + or - SD = 21 + or - 3.4). Law and art students presented a cyclothymic or irritable temperament. Engineering students presented a hyperthymic temperament. Psychology and nursing students presented predominantly depressive and anxious temperaments. Medicine students were least extreme in temperament scores or frequencies. Nursing students came largely from one university located in a Portuguese city (northeast from Lisbon) which could be a potential limitation to be confirmed. Distinct temperamental profiles of students enrolled in different professional fields could be identified in our sample taking into account the presence or absence of excessive temperaments. Future physicians did not present a predominant temperament, future lawyers and artists presented predominantly a cyclothymic or irritable temperament, future engineers presented a hyperthymic temperament and, future psychologists and nurses presented predominantly depressive and anxious temperaments. Copyright 2009 Elsevier B.V. All rights reserved.

Students Across Borders: A Summer Earth Science Workshop for Hispanic High School Students

NASA Astrophysics Data System (ADS)

Butler, R. F.; Kresan, P.; Baez, A.; Sheppard, P.; Forger, G.; Rendon-Coke, G.; Gray, F.

2003-12-01

Southern Arizona has a high school (HS) population that is 28% Hispanic. However this fast-growing minority group represents only 14% of undergraduate students at the University of Arizona and 11% of science and engineering majors. The Students Across Borders Program was designed to assist Hispanic HS students across borders that often separate them from higher education and careers in science. In June 2003, five person student-teacher teams from Tucson, Yuma, and northern Sonora, Mexico lived in dormitories and participated in a weeklong program based on the University of Arizona campus. Activities included: field trips featuring inquiry-based investigations of geology, water quality, and tree rings; tours of engineering and science laboratories; introduction to student support organizations such as the Society of Hispanic Professional Engineers; and counseling by Career Services and Admissions personnel. Technology training included instruction in web design, digital imaging and online communication tools. Web sites developed by the student teams were presented to participants and families at the conclusion of the on-campus program. Web site development is continuing during the academic year to foster continuing communication between the student teams and presentation of results of follow-on projects assisted by graduate and undergraduate CATTS fellows and university faculty.

ALVA: A Successful Program for Increasing the Number of Minority Undergraduates who Earn Engineering Degrees

PubMed Central

Peterson, Lisa; Pinkham, Scott; Jordan, Cathryne

2010-01-01

A highly successful minority outreach and support program for incoming college freshmen in engineering is described. The University of Washington has been running ALVA (Alliances for Learning and Vision for underrepresented Americans) for 11 years and continuously tracks its participants. Partners in ALVA come from the government, education, and industry. This program targets talented underrepresented minority students and addresses four major hurdles that face minority students in engineering: lack of vision of themselves as an engineer, finances, community, and academic preparation. We will present ALVA as a model that can be duplicated at other colleges and universities. PMID:25242894

New Laboratory Course for Senior-Level Chemical Engineering Students

ERIC Educational Resources Information Center

Aronson, Mark T.; Deitcher, Robert W.; Xi, Yuanzhou; Davis, Robert J.

2009-01-01

A new laboratory course has been developed at the University of Virginia for senior- level chemical engineering students. The new course is based on three 4-week long experiments in bioprocess engineering, energy conversion and catalysis, and polymer synthesis and characterization. The emphasis is on the integration of process steps and the…

An Evaluation of HigherEd 2.0 Technologies in Undergraduate Mechanical Engineering Courses

ERIC Educational Resources Information Center

Orange, Amy; Heinecke, Walter; Berger, Edward; Krousgrill, Charles; Mikic, Borjana; Quinn, Dane

2012-01-01

Between 2006 and 2010, sophomore engineering students at four universities were exposed to technologies designed to increase their learning in undergraduate engineering courses. Our findings suggest that students at all sites found the technologies integrated into their courses useful to their learning. Video solutions received the most positive…

Assessing an Entrepreneurship Education Project in Engineering Studies by Means of Participatory Techniques

ERIC Educational Resources Information Center

Ortiz-Medina, Leovigilda; Fernández-Ahumada, Elvira; Lara-Vélez, Pablo; Garrido-Varo, Ana; Pérez-Marin, Dolores; Guerrero-Ginel, José Emilio

2014-01-01

The new imperatives of the knowledge-based society require engineering students to equip themselves with a broad range of skills, among which entrepreneurship plays a critical role. An academic itinerary was designed with the explicit aim of improving the entrepreneurial attitudes of agricultural engineering students in a state university in…

Theo Jansen Project in Engineering Design Course and a Design Example

ERIC Educational Resources Information Center

Liu, Yucheng; Artigue, Aaron; Sommers, Jeremy; Chambers, Terence

2011-01-01

Objectives of a project-oriented mechanical engineering course, Engineering Design, were achieved through a design project, where students designed, built and demonstrated an extreme version of a basic Theo Jansen device. Through this project, junior students in the University of Louisiana fully developed the capability of applying mathematic and…

Heat Exchanger Lab for Chemical Engineering Undergraduates

ERIC Educational Resources Information Center

Rajala, Jonathan W.; Evans, Edward A.; Chase, George G.

2015-01-01

Third year chemical engineering undergraduate students at The University of Akron designed and fabricated a heat exchanger for a stirred tank as part of a Chemical Engineering Laboratory course. The heat exchanger portion of this course was three weeks of the fifteen week long semester. Students applied concepts of scale-up and dimensional…

An Examination of Computer Engineering Students' Perceptions about Asynchronous Discussion Forums

ERIC Educational Resources Information Center

Ozyurt, Ozcan; Ozyurt, Hacer

2013-01-01

This study was conducted in order to reveal the usage profiles and perceptions of Asynchronous Discussion Forums (ADFs) of 126 computer engineering students from the Computer Engineering Department in a university in Turkey. By using a mixed methods research design both quantitative and qualitative data were collected and analyzed. Research…

Studies on the Use of Extramural Videopublished Materials in Continuing Education. Final Report.

ERIC Educational Resources Information Center

Sjogren, Douglas; And Others

The Engineering Renewal and Growth (ERG) program at Colorado State University (CSU) was designed for continuing education of engineers. The program used videotapes and coordinated written materials to deliver instruction to the practicing engineer. Courses were leased to individual students or industries in which students worked. The courses were…

Six University Canada/US/Mexico exchange program in Earth Hazards (EHaz)

NASA Astrophysics Data System (ADS)

Stix, J.; Rose, W. I.

2005-12-01

This program is a consortium of six research-based universities in Canada, Mexico, and the U.S (Michigan Tech, Buffalo, McGill, Waterloo, UNAM and Colima) funded by the Department of education in the US and equivalent organizations in Canada and Mexico as part of the NAFTA agreement. The focus area for the mobility program is mitigation of geological natural hazards in North America. The consortium universities will exchange students and faculty in several engineering and science disciplines (e.g. environmental engineering, civil engineering, geological engineering, social sciences and geology) involved in the study of natural geological hazards. Students in the social sciences also will be exchanged, recognizing that the solution of natural hazards problems involves critical political, social, and economic aspects. Students will be mobilized among the participating universities through one- to two-semester visits and up to 60 more students will be mobilized via short-term, intensive courses. Student activities will consist of three stages: intensive language training, natural hazards coursework, and professional or research internships with local industries, agencies or at the host university. In each of the next three years there will be a joint advanced volcanology class run via videoconferencing and a three week field trip to areas of volcanological interest in Canada, US and Mexico. The course and field trip foci for the next three years are: 2006: Megaeruptions/ LongValley and Yellowstone; 2007: Volcanic edifice failure/ Cascades and Western Canada 2008: Convergent plate Boundary Volcanism/ Mexican Volcanic Belt Although the six universities will have first access to the exchange we are constructing ways for other volcanology programs to share the teleconference courses and field trips.

Freshman year computer engineering students' experiences for flipped physics lab class: An action research

NASA Astrophysics Data System (ADS)

Akı, Fatma Nur; Gürel, Zeynep

2017-02-01

The purpose of this research is to determine the university students' learning experiences about flipped-physics laboratory class. The research has been completed during the fall semester of 2015 at Computer Engineering Department of Istanbul Commerce University. In this research, also known as a teacher qualitative research design, action research method is preferred to use. The participants are ten people, including seven freshman and three junior year students of Computer Engineering Department. The research data was collected at the end of the semester with the focus group interview which includes structured and open-ended questions. And data was evaluated with categorical content analysis. According to the results, students have some similar and different learning experiences to flipped education method for physics laboratory class.

A Report on the Present Status of Engineering Mathematics Test (EMaT)

NASA Astrophysics Data System (ADS)

Watanabe, Toshimasa; Takafuji, Daisuke

The aim of Engineering Mathematics Test (EMaT) is to make sure what essentials in curriculum of Engineering Mathematics is, and to assess university students’ core academic competence and achievement of Engineering Mathematics, helping assurance of students’ academic ability. It is useful for professors to evaluate teaching effect of the classes, and this evaluation would help them improve curricula. Scores can be available for both graduate school entrance examinations and employment tests, leading to selecting persons with basic academic ability in Engineering Mathematics. The scope includes fundamentals in Calculus, Linear Algebra, Differential Equations, and Probability and Statistics. It is open to all students free of charge, and is annually given once in December. In 2007, 2,396 students from 35 universities took EMaT, and the total number of students who have taken EMaT in these 5 years is 6,240.

Creating Educational Pathways: A Montana University Teams Up with Tribal Colleges.

ERIC Educational Resources Information Center

Trinity, Annette

1990-01-01

Describes programs at Montana State University, Bozeman, that cooperate with tribally controlled community colleges to provide opportunities for American Indian transfer students. Focuses on training in health sciences, engineering, public service, and educational administration and on efforts to ease students' transition to university life. (SV)

Graduate engineering research participation in aeronautics

NASA Technical Reports Server (NTRS)

Roberts, A. S., Jr.

1984-01-01

Graduate student engineering research in aeronautics at Old Dominion University is surveyed. Student participation was facilitated through a NASA sponsored university program which enabled the students to complete degrees. Research summaries are provided and plans for the termination of the grant program are outlined. Project topics include: Failure modes for mechanically fastened joints in composite materials; The dynamic stability of an earth orbiting satellite deploying hinged appendages; The analysis of the Losipescu shear test for composite materials; and the effect of boundary layer structure on wing tip vortex formation and decay.

Evaluating a technical university's placement test using the Rasch measurement model

NASA Astrophysics Data System (ADS)

Salleh, Tuan Salwani; Bakri, Norhayati; Zin, Zalhan Mohd

2016-10-01

This study discusses the process of validating a mathematics placement test at a technical university. The main objective is to produce a valid and reliable test to measure students' prerequisite knowledge to learn engineering technology mathematics. It is crucial to have a valid and reliable test as the results will be used in a critical decision making to assign students into different groups of Technical Mathematics 1. The placement test which consists of 50 mathematics questions were tested on 82 new diplomas in engineering technology students at a technical university. This study employed rasch measurement model to analyze the data through the Winsteps software. The results revealed that there are ten test questions lower than less able students' ability. Nevertheless, all the ten questions satisfied infit and outfit standard values. Thus, all the questions can be reused in the future placement test at the technical university.

Retrodirective Radar Calibration Nanosatellite

DTIC Science & Technology

2013-07-01

Martin (Student Program Manager); Nicholas G. Fisher (Student Systems Engineer) University of Hawaii JULY 2013 Final Report...Cost-Effective, Rapid Design of a Student-Built Radar Calibration Nanosatellite Larry K. Martin , Nicholas G. Fisher, Toy Lim, John...University of Hawaii Reinventing Space Conference AIAA-RS-2012-3001 Martin 1 AIAA Reinventing Space Conference 2012

A Study on Metacognitive Thinking Skills of University Students

ERIC Educational Resources Information Center

Coskun, Yemliha

2018-01-01

The purpose of this study is to investigate the university students' metacognition thinking skills. The research is a descriptive study in the screening model.The study was carried out with 407 students from the faculties of physical education and sports, education science and letters, business administration, theology, engineering, forestry and…

University of Colorado CubeSat Student Projects as Successful Model for Teaching Students about Engineering Practices

NASA Astrophysics Data System (ADS)

Palo, S. E.; Li, X.; Woods, T. N.; Kohnert, R.

2014-12-01

There is a long history of cooperation between students at the University of Colorado, Boulder and professional engineers and scientists at LASP, which has led to many successful space missions with direct student involvement. The recent student-led missions include the Student Nitric Oxide Explorer (SNOE, 1998 - 2002), the Student Dust Counter (SDC) on New Horizons (2006 - present), the Colorado Student Space Weather Experiment (CSSWE), being a very successful NSF CubeSat that launched in September 2012, and the NASA Miniature X-ray Solar Spectrometer (MinXSS) CubeSat (launch will be in early 2015). Students are involved in all aspects of the design, and they experience the full scope of the mission process from concept, to fabrication and test, and mission operations. A significant part of the student involvement in the CubeSat projects is gained by using the CubeSat development as a focal point for an existing two-semester course sequence in CU's Aerospace Engineering Sciences (AES) Department: the Space Hardware Design section of Graduate Projects I & II (ASEN 5018 & ASEN 6028). The goal of these courses is to teach graduate students how to design and build systems using a requirement-based approach and fundamental systems engineering practices. The two-semester sequence takes teams of about 15 students from requirements definition and preliminary design through manufacturing, integration, and testing. In addition to the design process, students learn key professional skills such as working effectively in groups, finding solutions to open-ended problems, and actually building a system to their own set of specifications. The partnership between AES and LASP allows us to include engineering professionals in the mix, thus more effectively training science and engineering students for future roles in the civilian or commercial space industry. The mentoring process with LASP engineers helps to mitigate risk of the inexperience of the students and ensures consistent system engineer oversight for the multi-year CubeSat programs.

Final Progress Report for Award DE-FG07-05ID14637.pdf

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cathy Dixon

2012-03-09

2004-2011 Final Report for AFCI University Fellowship Program. The goal of this effort was to be supportive of university students and university programs - particularly those students and programs that will help to strengthen the development of nuclear-related fields. The program also supported the stability of the nuclear infrastructure and developed research partnerships that are helping to enlarge the national nuclear science technology base. In this fellowship program, the U.S. Department of Energy sought master's degree students in nuclear, mechanical, or chemical engineering, engineering/applied physics, physics, chemistry, radiochemistry, or fields of science and engineering applicable to the AFCI/Gen IV/GNEP missionsmore » in order to meet future U.S. nuclear program needs. The fellowship program identified candidates and selected full time students of high-caliber who were taking nuclear courses as part of their degree programs. The DOE Academic Program Managers encouraged fellows to pursue summer internships at national laboratories and supported the students with appropriate information so that both the fellows and the nation's nuclear energy objectives were successful.« less

The University of Michigan's Computer-Aided Engineering Network.

ERIC Educational Resources Information Center

Atkins, D. E.; Olsen, Leslie A.

1986-01-01

Presents an overview of the Computer-Aided Engineering Network (CAEN) of the University of Michigan. Describes its arrangement of workstations, communication networks, and servers. Outlines the factors considered in hardware and software decision making. Reviews the program's impact on students. (ML)

An Electrical Engineering Summer Academy for Middle School and High School Students

ERIC Educational Resources Information Center

LoPresti, Peter G.; Manikas, Theodore W.; Kohlbeck, Jeff G.

2010-01-01

An Electrical Engineering Summer Academy for Pre-College Students was held at the University of Tulsa, Tulsa, OK, during the summers of 2007 and 2008. The Academy participants included students having just completed 7th to 11th grade and teachers from middle school through high school. The students and teachers participated in team-building,…

Portraits of PBL: Course Objectives and Students' Study Strategies in Computer Engineering, Psychology and Physiotherapy.

ERIC Educational Resources Information Center

Dahlgren, Madeleine Abrandt

2000-01-01

Compares the role of course objectives in relation to students' study strategies in problem-based learning (PBL). Results comprise data from three PBL programs at Linkopings University (Sweden), in physiotherapy, psychology, and computer engineering. Faculty provided course objectives to function as supportive structures and guides for students'…

Correlation between Sustainability Education and Engineering Students' Attitudes towards Sustainability

ERIC Educational Resources Information Center

Tang, Kuok Ho Daniel

2018-01-01

Purpose: The purpose of this study is to investigate the impacts of a sustainable development course on the beliefs, attitudes and intentions of a cohort of engineering students in a university in Miri, Malaysia, towards sustainability. Design/methodology/approach: Questionnaire survey was conducted among the cohort of students encompassing the…

Instructional Improvement and Student Engagement in Post-Secondary Engineering Courses: The Complexity Underlying Small Effect Sizes

ERIC Educational Resources Information Center

Hilpert, Jonathan C.; Husman, Jenefer

2017-01-01

The current study leveraged a professional development programme for engineering faculty at a large research university to examine the impact of instructional improvement on student engagement. Professors who participated in the professional development were observed three times and rated using an existing observation protocol. Students in courses…

Discontinuities in University Student Experiences of Learning through Discussions

ERIC Educational Resources Information Center

Ellis, Robert A.; Calvo, Rafael A.

2006-01-01

This article reports on research into the student experience of learning through discussions in a third-year undergraduate engineering subject. Information engineering students studying e-commerce were required to engage in face-to-face and online discussions as a key aspect of their learning experience. This study investigates the quality of the…

Effective Engineering Presentations through Teaching Visual Literacy Skills.

ERIC Educational Resources Information Center

Kerns, H. Dan; And Others

This paper describes a faculty resource team in the Bradley University (Illinois) Department of Industrial Engineering that works with student project teams in an effort to improve their visualization and oral presentation skills. Students use state of the art technology to develop and display their visuals. In addition to technology, students are…

A Mathematics Support Programme for First-Year Engineering Students

ERIC Educational Resources Information Center

Hillock, Poh Wah; Jennings, Michael; Roberts, Anthony; Scharaschkin, Victor

2013-01-01

This article describes a mathematics support programme at the University of Queensland, targeted at first-year engineering students identified as having a high risk of failing a first-year mathematics course in calculus and linear algebra. It describes how students were identified for the programme and the main features of the programme. The…

Students Pave the Way for Greater Accessibility

ERIC Educational Resources Information Center

Hollingsworth, Jan Carter

2007-01-01

This article reports how the engineering students at the University of South Florida (USP) presented their latest inventions last April 17 and 19. As part of a senior level class in the rehabilitation engineering and technology program, these students were challenged to design assistive devices that will aid those with disabilities to better…

Discovering How Students Search a Library Web Site: A Usability Case Study.

ERIC Educational Resources Information Center

Augustine, Susan; Greene, Courtney

2002-01-01

Discusses results of a usability study at the University of Illinois Chicago that investigated whether Internet search engines have influenced the way students search library Web sites. Results show students use the Web site's internal search engine rather than navigating through the pages; have difficulty interpreting library terminology; and…

How Does Service Learning Increase and Sustain Interest in Engineering Education for Underrepresented Pre-Engineering College Students?

ERIC Educational Resources Information Center

Bosman, Lisa; Chelberg, Kelli; Winn, Ryan

2017-01-01

Many barriers exist for American Indian students pursuing STEM degree programs. However, federally recognized Tribal Colleges and Universities (TCUs) are uniquely suited to overcome these barriers because of their shared mission to provide 21st Century educational opportunities for American Indian students. Qualitative and quantitative findings…

German-Chinese cooperative Bachelor in engineering physics/optoelectronics

NASA Astrophysics Data System (ADS)

Wick, Michael; Lindner, Gerhard; Zimmer, Katja; Zheng, Jihong; Xu, Boqing; Wang, Ning; Schreiner, Rupert; Fuhrmann, Thomas; Seebauer, Gudrun

2017-08-01

The University of Shanghai for Science and Technology (USST), the Coburg University of Applied Sciences and Arts (CUASA) and the OTH Regensburg, University of Applied Sciences (OTHR) established an English taught international cooperative bachelor program in the area of Engineering Physics/Optoelectronics. Students from China study their first four semesters at USST. They continue their studies in Germany for the last three semesters, including an internship and a bachelor thesis, graduating with a Chinese and a German bachelor degree. Students from Germany study their third and fourth semester at USST to gain international experience. While the first cohort of Chinese students is currently in Germany, the second cohort of German students is in Shanghai. Up to now the feedback regarding this study program is completely positive, thus it is planned to develop it further.

Nuclear engineering enrollments and degrees, 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Little, J R; Shirley, D L

1982-05-01

This report presents data on the number of students enrolled and the degrees awarded in academic year 1980-81 from 73 US institutions offering degree programs in nuclear engineering or nuclear options within other engineering fields. Presented here are historical data for the last decade, which provide information such as trends by degree level, foreign national student participation, female and minority student participation, and placement of graduates. Also included is a listing of the universities by type of program and number of students.

Student Enrollment in Geoscience Departments. 1982-1983.

ERIC Educational Resources Information Center

American Geological Inst., Washington, DC.

Presented in table format are student enrollment data for geoscience disciplines at colleges and universities in the United States and Canada. Subfields for both countries include: geology; geophysics; oceanography; marine science; geological engineering; geophysical engineering; geochemistry; hydrology; mineralogy; paleontology; soil science;…

Home school student visit and introduction to rail transportation and engineering.

DOT National Transportation Integrated Search

2016-06-22

This project consisted of hosting local Champaign-Urbana, Illinois home school students for a visit to : the Rail Transportation and Engineering Center (RailTEC) at the University of Illinois at Urbana- : Champaign (UIUC). Beyond visiting RailTEC, st...

Essential elements in teaming: Creation of a team rubric

DOT National Transportation Integrated Search

2002-12-01

To further meet the needs of faculty and students at the University of Idaho in the College of Engineering, the Learning Environment Developers (a group of seven undergraduate mechanical engineering students known as Team LED) proposed to develop a r...

Puzzle-based learning in engineering mathematics: students' attitudes

NASA Astrophysics Data System (ADS)

Klymchuk, Sergiy

2017-11-01

The article reports on the results of two case studies on the impact of the regular use of puzzles as a pedagogical strategy in the teaching and learning of engineering mathematics. The intention of using puzzles is to engage students' emotions, creativity and curiosity and also to enhance their generic thinking skills and lateral thinking 'outside the box'. Students' attitudes towards this pedagogical strategy are evaluated via short questionnaires with two groups of university students taking a second-year engineering mathematics course. Students' responses to the questionnaire are presented and analyzed in the paper.

Multidisciplinary Graduate Education in Bioprocess Engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mark A. Eiteman

2006-04-18

This report describes the accomplishments of the University of Georgia in establishing an academic program geared toward the emerging biobased products industry. By virtue of its strengths and structure, the University of Georgia is particularly well-suited for developing a program focused on plant- and microbial-based bioproducts, and it was in this general area that this program was developed. The program had several unique characteristics. First, we implemented a distinguished lecture series that brought outstanding scientists and engineers to our University to interact with students and share their vision of the biobased economy. Second, we offered industrially-oriented and multidisciplinary courses thatmore » provided students with a broad background on various facets of biobased business and technology. Third, we provided the students with opportunities to expand beyond the classroom by engaging in research lab rotations and industrial internships. Fourth, each student was engaged in a creative research project as led by a multidisciplinary faculty team. Throughout the implementation of these activities, we maintained a student-centered, mentoring approach to education. The most tangible outcome of this project was the graduation of two students who participated in a variety of scholarly activities, culminating in research toward the completion of a thesis and dissertation. Both research projects involved the use of microorganisms to produce industrial products from agricultural substrates via fermentation processes. The research advanced our understanding of microorganisms as used for industrial processes and products, as described in several articles published in scholarly journals and presentations made at scientific conferences (see information on pp. 14-15). Another outcome is one graduate course, Fermentation Engineering Laboratory, which is a unique experiential and multidisciplinary course. This course will be offered in the future as an elective to graduate students in several engineering and science degree programs. Other significant developments have arisen as direct or indirect consequences of this project. The University of Georgia has established a B.S. Biochemical Engineering degree and an M.S. Biochemical Engineering degree. A strong component of these degree programs is education toward a biobased economy. We will integrate particularly positive components of this project (such as the distinguished lecture series) into these degree programs. The University of Georgia is establishing a Center for Biorefining and Carbon Cycling. This multidisciplinary Center houses a pilot scale biorefinery, comprising a pyrolysis unit and an ethanol plant. Together with new faculty positions that are currently being advertised, this project has encouraged the University of Georgia to assume a leadership role in the preparation of students in the biobased industries of the future.« less

A Qualitative Evaluation of the Use of Multimedia Case Studies in an Introductory Engineering Course at Two Southeastern Universities

ERIC Educational Resources Information Center

Huett, Kim C.; Kawulich, Barbara

2015-01-01

Collaborating at two universities to improve teaching and learning in undergraduate engineering, an interdisciplinary team of researchers, instructors, and evaluators planned and implemented the use of multimedia case studies with students enrolled in an introductory engineering course. This qualitative action evaluation study focuses on results…

Influence of an Environmental Studies Course on Attitudes of Undergraduates at an Engineering University

ERIC Educational Resources Information Center

Kuo, Shih-Yun; Jackson, Nancy L.

2014-01-01

Studies suggest that at engineering universities, where the percentage of males and engineering majors is high, pro-environmental attitudes are likely to be weak and may not change. The 15-item New Ecological Paradigm (NEP) scale was used to measure differences in student attitudes before and after an environmental studies course. Results revealed…

African American student perception of persistence in engineering at a predominantly white institution

NASA Astrophysics Data System (ADS)

Bennett, Sean T.

This study examines African American student perceptions of persistence in engineering. The research design is methodologically qualitative using a purposefully selected population of engineering students. Semi-structured interviews were designed to develop an in-depth understanding of what completion of the engineering degree means to African American engineering students. This research seeks insight into the linkages between African American student perceptions of persistence as it relates to both the academic and social culture of the engineering department. Vincent Tinto's model of Institutional Departure (1975, 1987) is one of the most commonly cited models of persistence in higher education (Braxton, Milem, Sullivan, 2000). Tinto's model was leveraged in this study to understand perceptions obtained through student interviews. Tinto suggests that exploration of student goal commitment and perceptions of institutional commitment are key to understanding student persistence. Results of this study suggest that African American students have perceptions about the university that may influence the decision to persist in engineering. Ultimately, this study may prove useful to researchers and administrators interested in improving access and success for African American engineering students.

NDSU undergraduate design projects for the disabled.

PubMed

Baczkowski, L S; Enderle, J D; Krause, D J; Rawson, J L

1990-01-01

Disabled persons of average means cannot afford custom made devices or adaptations to manufactured devices to meet their individual needs. Consequently, many disabled individuals have not been able to live as independently as society demands. At North Dakota State University, the need to give undergraduate electrical engineering students practical design experience has been fulfilled by requiring the students to design and build adaptive devices for the disabled. Consequently, the successful results of this effort have fulfilled the needs of two diverse human groups--student engineers and the disabled community. Presented is an effective approach used at North Dakota State University to manage senior design students.

NASA's Robotic Mining Competition Provides Undergraduates Full Life Cycle Systems Engineering Experience

NASA Technical Reports Server (NTRS)

Stecklein, Jonette

2017-01-01

NASA has held an annual robotic mining competition for teams of university/college students since 2010. This competition is yearlong, suitable for a senior university engineering capstone project. It encompasses the full project life cycle from ideation of a robot design, through tele-operation of the robot collecting regolith in simulated Mars conditions, to disposal of the robot systems after the competition. A major required element for this competition is a Systems Engineering Paper in which each team describes the systems engineering approaches used on their project. The score for the Systems Engineering Paper contributes 25% towards the team’s score for the competition’s grand prize. The required use of systems engineering on the project by this competition introduces the students to an intense practical application of systems engineering throughout a full project life cycle.

Enhanced Learning from an Industry-University Partnership. Aluminum Engineering Course Design and Development.

ERIC Educational Resources Information Center

Pai, Devdas M.; DeBlasio, Richard A.

1997-01-01

The example of Alcoa and North Carolina State University shows that partnerships in course design, development, and delivery can result in an engineering curriculum that bridges theory and practice and makes students aware of industry expectations. (SK)

Outcomes for engineering students delivering a STEM education and outreach programme

NASA Astrophysics Data System (ADS)

Fitzallen, Noleine; Brown, Natalie Ruth

2017-11-01

University science outreach programmes are used to encourage more school students to select science, technology, engineering, and mathematics (STEM) subjects in further education and pursue science-related careers. The benefits of science outreach programmes are often espoused from the perspective of programme participants. Little attention, however, is given to what university students delivering the programmes gain from the experience. This paper seeks to illustrate the benefits of engineering students delivering STEM outreach programmes in schools. It reports on a qualitative case study of the experiences of two STEM Education and Outreach team members from a regional university in Australia. Content analysis of interview data highlighted not only the participants' motivations and perceived benefits of being involved in the STEM programme but also revealed the skills and attributes honed throughout the experience. Involvement in the STEM outreach programme resulted in the development of social and personal responsibility generic graduate attribute skills, evidenced through their motivations to be involved, the demonstration of understanding of teaching and learning, and application of science communication skills. This study demonstrates that designing and delivering STEM outreach programmes assists in the development of skills that will be beneficial when pursuing careers in engineering in the future.

The Education of Future Aeronautical Engineers: Conceiving, Designing, Implementing and Operating

ERIC Educational Resources Information Center

Crawley, Edward F.; Brodeur, Doris R.; Soderholm, Diane H.

2008-01-01

This paper will outline answers to the two central questions regarding improving engineering education: (1) What is the full set of knowledge, skills, and attitudes that engineering students should possess as they leave the university, and at what level of proficiency?; and (2) How can we do better at ensuring that students learn these skills? The…

Social Cognitive Predictors of Academic Interests and Goals in South Korean Engineering Students

ERIC Educational Resources Information Center

Kim, Min Sun; Seo, Young Seok

2014-01-01

The purpose of this study was to investigate the applicability of social cognitive career theory (SCCT) in a cross-cultural setting by examining the relationships between the social cognitive variables of South Korean engineering students and their engineering interests and major choice goals across university type and gender. Participants (N =…

Effectiveness of Three Case Studies and Associated Teamwork in Stimulating Freshman Interest in an Introduction to Engineering Course

ERIC Educational Resources Information Center

McIntyre, Joseph S.

2011-01-01

The effectiveness of three case studies and associated teamwork to stimulate interest of college freshman in engineering was investigated by observing students. Case studies were assigned as laboratory team exercises in an introduction to engineering course at Auburn University. Student interest in the case studies was evaluated qualitatively…

Estimating Survival Rates in Engineering for Community College Transfer Students Using Grades in Calculus and Physics

ERIC Educational Resources Information Center

Laugerman, Marcia; Shelley, Mack; Rover, Diane; Mickelson, Steve

2015-01-01

This study uses a unique synthesized set of data for community college students transferring to engineering by combining several cohorts of longitudinal data along with transcript-level data, from both the Community College and the University, to measure success rates in engineering. The success rates are calculated by developing Kaplan-Meier…

Ohio Space Grant Funds for Scholarship/Fellowship Students

NASA Technical Reports Server (NTRS)

1996-01-01

The Ohio Aerospace Institute (OAT), a consortium of university, industry, and government, was formed to promote collaborative aerospace-related research, graduate education, and technology transfer among the nine Ohio universities with doctoral level engineering programs, NASA Lewis Research Center, Air Force Wright Laboratory, and industry. OAT provides enhanced opportunities for affiliates to utilize federal government research laboratories and facilities at Lewis Research Center (LeRC) and Wright Laboratory. As a component of the graduate education and research programs, students and faculty from the member universities, LeRC engineers and scientists, and visiting investigators from industry, government and non-member universities conduct collaborative research projects using the unique facilities at LeRC, and will participate in collaborative education programs. Faculty from the member universities who hold collateral appointments at OAT, and government and industry experts serving as adjunct faculty, can participate in the supervision of student research.

Impact of Internet Search Engines on OPAC Users: A Study of Punjabi University, Patiala (India)

ERIC Educational Resources Information Center

Kumar, Shiv

2012-01-01

Purpose: The aim of this paper is to study the impact of internet search engine usage with special reference to OPAC searches in the Punjabi University Library, Patiala, Punjab (India). Design/methodology/approach: The primary data were collected from 352 users comprising faculty, research scholars and postgraduate students of the university. A…

Competence formation of engineering directions students in the field of energy saving as a way to create new generation technologies

NASA Astrophysics Data System (ADS)

Gilmanshin, I. R.; Gilmanshina, S. I.

2017-09-01

The urgency of the formation of competence in the field of energy saving in the process of studying engineering and technical disciplines at the university is substantiated. The author’s definition of the competence in the field of energy saving is given, allowing to consider the necessity of its formation among students - future engineers as a way to create technologies of a new generation. The essence of this competence is revealed. The system of work, pedagogical conditions and technologies of its formation in the conditions of the federal university is substantiated.

An Australian study of possible selves perceived by undergraduate engineering students

NASA Astrophysics Data System (ADS)

Bennett, Dawn; Male, Sally A.

2017-11-01

In this study, we worked with second-year engineering students at an Australian university to examine previously identified threshold concepts within the theoretical framework of Possible Selves. Using workshops as the context for intensive work with students, students were encouraged to consider their future lives and work, including their engineering fears, expectations, and aspirations. The findings revealed many students to have a poor understanding of the realities of engineering work. Moreover, perceived gaps between self-efficacy and the requirements of engineering work appeared to be motivating if students deemed it possible to reduce the gap, but demotivating if they identified a characteristic over which there was perceived to be no control. The study suggests that these engineering students needed more opportunities to explore both the roles of engineers and their own possible selves. Overall, the findings indicate that higher education students may need encouragement and support to explore potential future roles, and they strengthen calls for further research in this area.

Dual education and industrial cooperation in electrical engineering

NASA Astrophysics Data System (ADS)

Váradiné Szarka, A.

2016-11-01

Dual education in higher education is a new system in Hungary introduced by Mercedes Benz with cooperation of Kecskemet College. In the new system companies support certain number of students and provide them strong practical education in their field. Students applying successfully for dual education study together with non-dual students at the university, so they go through the same university courses as their non-dual colleagues, but while non-dual students’ academic year includes 2×14 weeks active semester and 2×6 weeks exam session, all over 40 weeks, dual students have 48 working weeks including study at the university and practicing at the company. The main question of the success which one is the most effective model to be applied. This paper summarises 2 models of dual education with their advantages and disadvantages and also it presents practical realization at the University of Debrecen with special attention to measurement and instrumentation. Dual education in BSc level electrical engineering course cooperates with 6 multinational companies of the region in four specialization. Dual education also has great impact to the modernisation of engineering education. Detailed study of dual education in field of instrumentation and measurement is provided in the paper.

Predicting performance in a first engineering calculus course: implications for interventions

NASA Astrophysics Data System (ADS)

Hieb, Jeffrey L.; Lyle, Keith B.; Ralston, Patricia A. S.; Chariker, Julia

2015-01-01

At the University of Louisville, a large, urban institution in the south-east United States, undergraduate engineering students take their mathematics courses from the school of engineering. In the fall of their freshman year, engineering students take Engineering Analysis I, a calculus-based engineering analysis course. After the first two weeks of the semester, many students end up leaving Engineering Analysis I and moving to a mathematics intervention course. In an effort to retain more students in Engineering Analysis I, the department collaborated with university academic support services to create a summer intervention programme. Students were targeted for the summer programme based on their score on an algebra readiness exam (ARE). In a previous study, the ARE scores were found to be a significant predictor of retention and performance in Engineering Analysis I. This study continues that work, analysing data from students who entered the engineering school in the fall of 2012. The predictive validity of the ARE was verified, and a hierarchical linear regression model was created using math American College Testing (ACT) scores, ARE scores, summer intervention participation, and several metacognitive and motivational factors as measured by subscales of the Motivated Strategies for Learning Questionnaire. In the regression model, ARE score explained an additional 5.1% of the variation in exam performance in Engineering Analysis I beyond math ACT score. Students took the ARE before and after the summer interventions and scores were significantly higher following the intervention. However, intervention participants nonetheless had lower exam scores in Engineering Analysis I. The following factors related to motivation and learning strategies were found to significantly predict exam scores in Engineering Analysis I: time and study environment management, internal goal orientation, and test anxiety. The adjusted R2 for the full model was 0.42, meaning that the model could explain 42% of the variation in Engineering Analysis I exam scores.

First- and Second-Generation Design and Engineering Students: Experience, Attainment and Factors Influencing Them to Attend University

ERIC Educational Resources Information Center

Hunt, Clive; Collins, Bethan; Wardrop, Alex; Hutchings, Maggie; Heaslip, Vanessa; Pritchard, Colin

2018-01-01

Challenges for students who are "first-in-family" to attend university have been discussed within widening participation discourse. However, in the UK, "first-in-family" or first-generation students have frequently been conflated with those experiencing poverty or from lower socio-economic groups. This research integrated…

Lithuanian University Students' Knowledge of Biotechnology and Their Attitudes to the Taught Subject

ERIC Educational Resources Information Center

Lamanauskas, Vincentas; Makarskaite-Petkeviciene, Rita

2008-01-01

The impact of genetic engineering on peoples' everyday life has become present reality. In order to establish the level of the available schoolchildren and university students' knowledge of biotechnology, various investigations have been conducted. However, the current situation in Lithuania remains unclear. A total of 287 students--pre-service…

University Programme Preferences of High School Science Students in Singapore and Reasons that Matter in their Preferences: A Rasch analysis

NASA Astrophysics Data System (ADS)

Oon, Pey-Tee; Subramaniam, R.

2015-01-01

This study explored an under-researched area in science education-the university programmes preferred by high school students who take physical science subjects and the reasons that matter in their preferences. A total of 1,071 upper secondary and pre-university students in Singapore, who take physical science subjects among their range of subjects, participated in this study. A survey method was adopted and the Rasch model was used to analyse the data. Overall, Business Studies was ranked as the predominant choice; nonetheless, scientific programmes such as Science, Engineering, and Mathematics are generally still well liked by the students. When gender differences were examined, we found that students largely followed gender-typical programme preferences, in which males tend to incline towards Engineering while females tend to incline towards Arts and Social Sciences. Students prefer a university programme based on their individual interest and ability, with career aspiration and remuneration coming next. Interestingly, females place greater emphasis on career aspiration than males. Some implications of the study are discussed.

Adaptation of abbreviated mathematics anxiety rating scale for engineering students

NASA Astrophysics Data System (ADS)

Nordin, Sayed Kushairi Sayed; Samat, Khairul Fadzli; Sultan, Al Amin Mohamed; Halim, Bushra Abdul; Ismail, Siti Fatimah; Mafazi, Nurul Wirdah

2015-05-01

Mathematics is an essential and fundamental tool used by engineers to analyse and solve problems in their field. Due to this, most engineering education programs involve a concentration of study in mathematics courses whereby engineering students have to take mathematics courses such as numerical methods, differential equations and calculus in the first two years and continue to do so until the completion of the sequence. However, the students struggled and had difficulties in learning courses that require mathematical abilities. Hence, this study presents the factors that caused mathematics anxiety among engineering students using Abbreviated Mathematics Anxiety Rating Scale (AMARS) through 95 students of Universiti Teknikal Malaysia Melaka (UTeM). From 25 items in AMARS, principal component analysis (PCA) suggested that there are four mathematics anxiety factors, namely experiences of learning mathematics, cognitive skills, mathematics evaluation anxiety and students' perception on mathematics. Minitab 16 software was used to analyse the nonparametric statistics. Kruskal-Wallis Test indicated that there is a significant difference in the experience of learning mathematics and mathematics evaluation anxiety among races. The Chi-Square Test of Independence revealed that the experience of learning mathematics, cognitive skills and mathematics evaluation anxiety depend on the results of their SPM additional mathematics. Based on this study, it is recommended to address the anxiety problems among engineering students at the early stage of studying in the university. Thus, lecturers should play their part by ensuring a positive classroom environment which encourages students to study mathematics without fear.

Distributive Learning in Introductory Chemical Engineering: University Students' Learning, Motivation, and Attitudes Using a CD-ROM

ERIC Educational Resources Information Center

Greene, Barbara A.; Dillon, Connie; Crynes, Billy

2003-01-01

This article reports a study in which student performance and approaches to study in a CD-ROM version of a chemical engineering course were examined. The study consists of three phases. The purpose of phase 1 was to evaluate of the efficacy of CD-ROM for this content and student population. Therefore, we compared the performance of students who…

Gender Differences in Student Performance and Attitudes. A Longitudinal Study of Engineering Student Performance and Retention. Report No. NCSU-94A.

ERIC Educational Resources Information Center

Felder, Richard M.; And Others

Many are aware that factors other than academic talent help to determine a student's success or failure in school A 4-year longitudinal study including 87 men and 34 women at North Carolina State University examines gender differences in students' academic performance, persistence in chemical engineering, and attitudes toward their education and…

Fourth Annual HEDS-UP Forum

NASA Technical Reports Server (NTRS)

Johnson, Kathleen M. (Editor)

2001-01-01

The HEDS-UP (Human Exploration and Development of Space-University Partners) program was instituted to build new relationships between university, faculty, students, and NASA in support of the Human Exploration and Development of Space. The program has provided a mechanism for university students to explore problems of interest to NASA through student engineering design projects, led by a university professor or mentor, and aided by the HEDS-UP staff. HEDS-UP program management advised teams on the selection of projects that were aligned with the goals of the HEDS strategic enterprise, and provided contacts with NASA and industry professionals who served as mentors. Students became acquainted with objectives, strategies, development issues, and technological characteristics of space exploration programs. In doing so, they prepared themselves for future engineering challenges, often discovering that the program was on their critical path to professional advancement. Many of the ideas were innovative and of interest to NASA. Industry benefitted from HEDS-UP as a mechanism to converge with talented students about to enter the work force. In addition, universities became more involved in the teaching of space exploration, and students were encouraged and mentored as they included education outreach as an element in their work. This in turn highlighted their performance to others and universities in their communities.

A New Group-Formation Method for Student Projects

ERIC Educational Resources Information Center

Borges, Jose; Dias, Teresa Galvao; Cunha, Joao Falcao E.

2009-01-01

In BSc/MSc engineering programmes at Faculty of Engineering of the University of Porto (FEUP), the need to provide students with teamwork experiences close to a real world environment was identified as an important issue. A new group-formation method that aims to provide an enriching teamwork experience is proposed. Students are asked to answer a…

Effects of Cloud-Based m-Learning on Student Creative Performance in Engineering Design

ERIC Educational Resources Information Center

Chang, Yu-Shan; Chen, Si-Yi; Yu, Kuang-Chao; Chu, Yih-Hsien; Chien, Yu-Hung

2017-01-01

This study explored the effects of cloud-based m-learning on students' creative processes and products in engineering design. A nonequivalent pretest-posttest design was adopted, and 62 university students from Taipei City, Taiwan, were recruited as research participants in the study. The results showed that cloud-based m-learning had a positive…

The Effects of a Collaborative Problem-Based Learning Experience on Students' Motivation in Engineering Capstone Courses

ERIC Educational Resources Information Center

Jones, Brett D.; Epler, Cory M.; Mokri, Parastou; Bryant, Lauren H.; Paretti, Marie C.

2013-01-01

We identified and examined how the instructional elements of problem-based learning capstone engineering courses affected students' motivation to engage in the courses. We employed a two-phase, sequential, explanatory, mixed methods research design. For the quantitative phase, 47 undergraduate students at a large public university completed a…

Development of a Support Environment for First Year Students Taking Materials Science/Engineering

ERIC Educational Resources Information Center

Laoui, Tahar; O'Donoghue, John

2008-01-01

This paper is based on the experience acquired in teaching materials science/engineering to first year university students. It has been observed that students struggle with some of the fundamental materials concepts addressed in the module/course. This applies to delivered lectures but extends to the incorporation of tutorial sessions provided…

Extensive Graded Reading with Engineering Students: Effects and Outcomes

ERIC Educational Resources Information Center

Hagley, Eric

2017-01-01

Extensive graded reading (EGR) was carried out with a cohort of 600 engineering students in a university in northern Japan. Pre-and post-surveys were conducted to discover changes in the general reading habits of students, their attitudes toward the assessment method and how goals changed over the course of study. The first survey was carried out…

Examining the Impact of the Engineering Successful/Unsuccessful Grading (SUG) Program on Student Retention

ERIC Educational Resources Information Center

Novak, Heather; Paguyo, Christina; Siller, Thomas

2016-01-01

In this study, we analyzed the Successful/Unsuccessful Grading (SUG) program, an intervention that was founded at a large public university to support students during their transition into the first year of undergraduate engineering (EG) coursework. To understand how the SUG program impacts student retention of EG majors, we conducted an analysis…

Graduation and Attrition of Engineering Students in Greece

ERIC Educational Resources Information Center

Caroni, C.

2011-01-01

Greek engineering Schools have a high status and attract good students. However, we show that in the leading institution, the National Technical University of Athens, only 27% of the students admitted in 1992-2003 graduated after the nominal five years study: the median graduation time was 73 months (reaching 93 months in one School) and 12% are…

Students' Attitudes towards Group-Based Project Exams in Two Engineering Programmes

ERIC Educational Resources Information Center

Dahl, Bettina; Kolmos, Anette

2015-01-01

At Aalborg University, engineering students spend half the time each semester in groups working on projects in a problem-based learning (PBL) curriculum. The projects are assessed through group exams, except for between 2007 and 2013 when the law forbade group-based project exams. Prior to 2007, a survey showed that students preferred the…

Observing Engineering Student Teams from the Organization Behavior Perspective Using Linguistic Analysis of Student Reflections and Focus Group Interviews

ERIC Educational Resources Information Center

Kearney, Kerri S.; Damron, Rebecca; Sohoni, Sohum

2015-01-01

This paper investigates group/team development in computer engineering courses at a University in the Central USA from the perspective of organization behavior theory, specifically Tuckman's model of the stages of group development. The investigation, conducted through linguistic analysis of student reflection essays, and through focus group…

Case study of a problem-based learning course of physics in a telecommunications engineering degree

NASA Astrophysics Data System (ADS)

Macho-Stadler, Erica; Jesús Elejalde-García, Maria

2013-08-01

Active learning methods can be appropriate in engineering, as their methodology promotes meta-cognition, independent learning and problem-solving skills. Problem-based learning is the educational process by which problem-solving activities and instructor's guidance facilitate learning. Its key characteristic involves posing a 'concrete problem' to initiate the learning process, generally implemented by small groups of students. Many universities have developed and used active methodologies successfully in the teaching-learning process. During the past few years, the University of the Basque Country has promoted the use of active methodologies through several teacher training programmes. In this paper, we describe and analyse the results of the educational experience using the problem-based learning (PBL) method in a physics course for undergraduates enrolled in the technical telecommunications engineering degree programme. From an instructors' perspective, PBL strengths include better student attitude in class and increased instructor-student and student-student interactions. The students emphasised developing teamwork and communication skills in a good learning atmosphere as positive aspects.

Enrolling in Science and Engineering Academic Programs—Motivating and Deterring Factors

NASA Astrophysics Data System (ADS)

Pomazan, Valentina; Mihalaşcu, Doina; Petcu, Lucian C.; Gîrtu, Mihai A.

2010-01-01

We report the results of the student responses to a survey aiming to determine the factors influencing the young generation in choosing a career in science and technology. The goal of the study is twofold: to identify the motives that determine students to enroll in university programs in science and technology and to engage in applied science and engineering careers and to discover the barriers that manifest at different age levels, preventing students from making such choices. The study was conducted at the Ovidius University and the "Energetic" Technical High School, both in Constanta, Romania, with samples of 257 and 106 students respectively, based on a 38 item online questionnaire. The samples selected from the student population allow for a wide range of analyses with respect to gender, family and educational background, field of study, etc. We discuss the role of the raw models, parents, educators, and we comment on ways to increase student enrollment in science and engineering.

The Emerging Engineering Scholar: A Citation Analysis of Theses and Dissertations at Western Michigan University

ERIC Educational Resources Information Center

Eckel, Edward J.

2009-01-01

Can one glimpse the development of emerging scholars in the work of engineering graduate students? To answer this question, the author studied the citation patterns in 96 Master's theses and 24 Ph.D. dissertations completed at Western Michigan University's College of Engineering and Applied Sciences between 2002 and 2006. The hypothesis of this…

Women in a Man's World: The Female Engineers

ERIC Educational Resources Information Center

Durchholz, Pat

1977-01-01

Comparisons and contrasts between female engineers, male engineers, and female scientists are made utilizing freshmen engineering and science students at the University of Cincinnati. Data including attitudes, career influences, parents' educational level, and career advantage ranking are included. (SL)

The Educational Needs of Graduate Mechanical Engineers in New Zealand.

ERIC Educational Resources Information Center

Deans, J.

1999-01-01

Surveys graduate and undergraduate mechanical engineering students at the University of Auckland. Shows that the dominant work activities of New Zealand mechanical engineers include design and consultancy and that graduate engineers rapidly migrate into management. (Author/CCM)

Teaching the Next Generation of Scientists and Engineers the NASA Design Process

NASA Technical Reports Server (NTRS)

Caruso, Pamela W.; Benfield, Michael P. J.; Justice, Stefanie H.

2011-01-01

The Integrated Product Team (IPT) program, led by The University of Alabama in Huntsville (UAH), is a multidisciplinary, multi-university, multi-level program whose goal is to provide opportunities for high school and undergraduate scientists and engineers to translate stakeholder needs and requirements into viable engineering design solutions via a distributed multidisciplinary team environment. The current program supports three projects. The core of the program is the two-semester senior design experience where science, engineering, and liberal arts undergraduate students from UAH, the College of Charleston, Southern University at Baton Rouge, and Ecole Suprieure des Techniques Aronautiques et de Construction Automobile (ESTACA) in Paris, France form multidisciplinary competitive teams to develop system concepts of interest to the local aerospace community. External review boards form to provide guidance and feedback throughout the semester and to ultimately choose a winner from the competing teams. The other two projects, the Innovative Student Project for the Increased Recruitment of Engineering and Science Students (InSPIRESS) Level I and Level II focus exclusively on high school students. InSPIRESS Level I allows high schools to develop a payload to be accommodated on the system being developed by senior design experience teams. InSPIRESS Level II provides local high school students first-hand experience in the senior design experience by allowing them to develop a subsystem or component of the UAH-led system over the two semesters. This program provides a model for NASA centers to engage the local community to become more involved in design projects.

Encouraging the learning of hydraulic engineering subjects in agricultural engineering schools

NASA Astrophysics Data System (ADS)

Rodríguez Sinobas, Leonor; Sánchez Calvo, Raúl

2014-09-01

Several methodological approaches to improve the understanding and motivation of students in Hydraulic Engineering courses have been adopted in the Agricultural Engineering School at Technical University of Madrid. During three years student's progress and satisfaction have been assessed by continuous monitoring and the use of 'online' and web tools in two undergraduate courses. Results from their application to encourage learning and communication skills in Hydraulic Engineering subjects are analysed and compared to the initial situation. Student's academic performance has improved since their application, but surveys made among students showed that not all the methodological proposals were perceived as beneficial. Their participation in the 'online', classroom and reading activities was low although they were well assessed.

Improving the Retention of First Year Students

NASA Astrophysics Data System (ADS)

Bishop, Graham

The thesis compares student attrition rates in two UWS Schools for 2004 and 2005. It analyses possible reasons why students discontinue and identifies strategies and approaches to improving the quality of the teaching and learning environment for these students. The thesis focuses on the retention of first year students in the School of Engineering at the University of Western Sydney. Low retention rates are costly to the university, leading to inefficient use of resources, failure to fulfil student aspirations, and intervention between the university and the student. In each chapter, the thesis addresses student retention, satisfaction and performance and the interrelation between them and outlines the measures taken by the School of Engineering to improve these measurements for students commencing in 2006 and proposes many recommendations for further improvements in subsequent years. Each chapter addresses these issues by following the student pathway, commencing with the student leaving High School and entering their chosen university and course of study. At each stage, the relevant issues are addressed which have a direct or indirect impact on student retention, satisfaction and performance. Use is made of reports and papers published by universities and organisations, as outlined in the Literature Review. The research questions provide data through the results obtained from surveys. Typical Retention Rates are 75% for UWS, 81% for the Sector, 76% for the New Generation Universities (NGUs) and 62% for the School of Engineering on which this research is focussed. This thesis confirms the research from many countries that closely links student retention with the quality of teaching and learning. Key issues are: • a sound first year student orientation and welcome by staff; encountering efficient, effective and accurate student. The introduction of a more effective and tailored orientation program in 2007 attracted, at UWS School of Engineering, 92% attendance and greater awareness by the students of their study program and the available support services; • having student queries responded to promptly and effectively; The introduction of a First Year Coordinator in 2007 proved to be well received, with a significant number of students having prompt responses to their queries, as compared with previous years; clear expectations management about services and key academic issues like assessment; the marketing of UWS Engineering programs was addressed in 2006 and 2007, with an expansion of the marketing program operated for feeder schools and improved awareness of student expectations prior to entry: an ongoing exercise; having committed, accessible, responsive and capable teaching staff; the accessibility and responsiveness of teaching staff to first year student issues, as outlined in this thesis, is being addressed in 2007; receiving prompt and helpful feedback on their learning; an issue being addressed by the First Year Teaching Team as an essential element of the teaching and learning process; together with: effective use of an appropriate selection from a myriad of learning strategies and resources which give emphasis to active learning, practice oriented learning, peer supported learning and self-managed learning; supported by a reliable infrastructure and support systems; and consistently encountering staff that are responsive and committed to giving service to student support. (Abstract shortened by ProQuest.).

Reverse Engineering and Software Products Reuse to Teach Collaborative Web Portals: A Case Study with Final-Year Computer Science Students

ERIC Educational Resources Information Center

Medina-Dominguez, Fuensanta; Sanchez-Segura, Maria-Isabel; Mora-Soto, Arturo; Amescua, Antonio

2010-01-01

The development of collaborative Web applications does not follow a software engineering methodology. This is because when university students study Web applications in general, and collaborative Web portals in particular, they are not being trained in the use of software engineering techniques to develop collaborative Web portals. This paper…

HI-TIE: The University, the High School, and Engineering

ERIC Educational Resources Information Center

Ward, Robert C.; Maxwell, Lee M.

1975-01-01

Describes four years experience at Colorado State University with courses introducing high school students to engineering, including a Fortran IV computer programming course in which tapings of actual campus classroom sessions, supplemented with homework assignments, class roles, quizzes, and examinations were used. Benefits of the transitional…

Final Technical Report: Hydrogen Energy in Engineering Education (H2E3)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lehman, Peter A.; Cashman, Eileen; Lipman, Timothy

2011-09-15

Schatz Energy Research Center's Hydrogen Energy in Engineering Education curriculum development project delivered hydrogen energy and fuel cell learning experiences to over 1,000 undergraduate engineering students at five California universities, provided follow-on internships for students at a fuel cell company; and developed commercializable hydrogen teaching tools including a fuel cell test station and a fuel cell/electrolyzer experiment kit. Monitoring and evaluation tracked student learning and faculty and student opinions of the curriculum, showing that use of the curriculum did advance student comprehension of hydrogen fundamentals. The project web site (hydrogencurriculum.org) provides more information.

The effects of computer-aided design software on engineering students' spatial visualisation skills

NASA Astrophysics Data System (ADS)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

Linking Engineering and Medical Training: A USC program seeks to introduce medical and engineering students to medical device development.

PubMed

Tolomiczenko, George; Sanger, Terry

2015-01-01

Medical students are attracted by the prospect of a meaningful addition to their clinical work. Engineering students are excited by a unique opportunity to learn directly alongside their medical student peers. For both, as well as the scientific community at large, the boutique program at the University of Southern California (USC) linking engineering and medical training at the graduate level is instructive of a new way of approaching engineering education that can potentially provide benefits to both students and society. Students who have grown up in an era of ?mass customization? in the retail and service industries can enjoy that same degree of flexibility also in the realm of education. At the same time, society gains engineers who have developed an increased empathy and awareness of the clinical contexts in which their innovations will be implemented.

Engines of Inequality: Diminishing Equity in the Nation's Premier Public Universities

ERIC Educational Resources Information Center

Gerald, Danette; Haycock, Kati

2006-01-01

The nation's 50 flagship universities serve disproportionately fewer low-income and minority students than in the past, according to this fifth report in the Education Trust's series on college results. Students in the entering and graduating classes at these schools look less and less like the state populations those universities were created to…

Guiding Students to Answers: Query Recommendation

ERIC Educational Resources Information Center

Yilmazel, Ozgur

2011-01-01

This paper reports on a guided navigation system built on the textbook search engine developed at Anadolu University to support distance education students. The search engine uses Turkish Language specific language processing modules to enable searches over course material presented in Open Education Faculty textbooks. We implemented a guided…

Misconceptions about Sound among Engineering Students

ERIC Educational Resources Information Center

Pejuan, Arcadi; Bohigas, Xavier; Jaen, Xavier; Periago, Cristina

2012-01-01

Our first objective was to detect misconceptions about the microscopic nature of sound among senior university students enrolled in different engineering programmes (from chemistry to telecommunications). We sought to determine how these misconceptions are expressed (qualitative aspect) and, only very secondarily, to gain a general idea of the…

Transfer Learning Community: Overcoming Transfer Shock and Increasing Retention of Mathematics and Science Majors

ERIC Educational Resources Information Center

Scott, Timothy P.; Thigpin, Sara S.; Bentz, Adrienne O.

2017-01-01

The College of Science at Texas A&M University developed a transfer student learning community with one 2-year institution after receiving National Science Foundation funds for scholarships to support students majoring in engineering and science. To date, 89% of the students that matriculated to Texas A&M University under this grant have…

Experience of cooperative learning in engineering

NASA Astrophysics Data System (ADS)

Maceiras, Rocio; Cancela, Angeles; Urréjola, Santiago; Sánchez, Angel

2011-03-01

The objective of this work is to share the authors' experience towards a different mode of teaching/learning method. Cooperative learning (Jigsaw) was employed on the University of Vigo's fourth-year engineering students. The results of the experience show that cooperative learning is quite a viable alternative to the classical way of lecturing at the university when the number of students is not too high. The authors' observation indicates that students did not show a lot of interest towards the new learning style but their resistance changed once they began the activity. The Jigsaw method has proved to be a useful tool for improving the learning process so that students have the opportunity to participate actively in the learning activities.

Dental anxiety among university students and its correlation with their field of study.

PubMed

Al-Omari, Wael Mousa; Al-Omiri, Mahmoud Khalid

2009-01-01

This study was designed to investigate the subjective ratings of dental anxiety levels among university students enrolled at Jordan University of Science and Technology. In addition, the present study aimed to explore the sources of dental anxiety and the impact of gender on the perceived dental anxiety and the correlation between field of study and dental anxiety level. The Modified Corah Dental Anxiety Scale was used to measure dental anxiety among the study population. Six hundred subjects were recruited into the study from Jordanian undergraduate students from the faculties of Medicine, Engineering, and Dentistry. Five hundred and thirty five complete questionnaires were returned, which accounts for a response rate of 89.2%. The totals of the mean anxiety scores were the following: Medical students, 13.58%; Engineering students, 13.27% and dental students, 11.22%. About 32% of the study population has scored 15 or more. Dental students had the lowest percentage of those who scored 15 or more. Surprisingly, the medical students were responsible for the highest percentage of those who scored 15 or above. Although women demonstrated statistically higher total dental anxiety scores than men (p= 0.03), the difference between both genders was small and could be clinically insignificant. The students were anxious mostly about tooth drilling and local anesthetic injection. Lack of adequate dental health education may result in a high level of dental anxiety among non-dental university students in Jordan. Further studies are required to identify the correlates of dental anxiety among university students.

Supplemental Instruction (SI) at the Faculty of Engineering (LTH), Lund University, Sweden. An Evaluation of the SI-Program at Five LTH Engineering Programs Autumn 2008

ERIC Educational Resources Information Center

Malm, Joakim; Bryngfors, Leif E.; Mörner, Lise-Lotte

2010-01-01

The study presents an evaluation of the SI program in five engineering programs within the Faculty of Engineering (LTH) based on data from questionnaires to SI participants and SI-Leaders, credits taken by the students during the first year, and average grade data from high school for the first year students. The results show that participation in…

Improvements to an Electrical Engineering Skill Audit Exam to Improve Student Mastery of Core EE Concepts

ERIC Educational Resources Information Center

Parent, D. W.

2011-01-01

The San Jose State University Electrical Engineering (EE) Department implemented a skill audit exam for graduating seniors in 1999 with the purpose of assessing the teaching and the students' mastery of core concepts in EE. However, consistent low scores for the first years in which the test was administered suggested that students had little…

The Role of Gender in Students' Ratings of Teaching Quality in Computer Science and Environmental Engineering

ERIC Educational Resources Information Center

Price, Linda; Svensson, Ingrid; Borell, Jonas; Richardson, John T. E.

2017-01-01

Students' ratings of teaching quality on course units in a computer science program and an environmental engineering program at a large Swedish university were obtained using the Course Experience Questionnaire; 8888 sets of ratings were obtained from men and 4280 sets were obtained from women over ten academic years. These student ratings from…

Black Boxes in Analytical Chemistry: University Students' Misconceptions of Instrumental Analysis

ERIC Educational Resources Information Center

Carbo, Antonio Domenech; Adelantado, Jose Vicente Gimeno; Reig, Francisco Bosch

2010-01-01

Misconceptions of chemistry and chemical engineering university students concerning instrumental analysis have been established from coordinated tests, tutorial interviews and laboratory lessons. Misconceptions can be divided into: (1) formal, involving specific concepts and formulations within the general frame of chemistry; (2)…

How Mockups, a Key Engineering Tool, Help to Promote Science, Technology, Engineering, and Mathematics Education

NASA Technical Reports Server (NTRS)

McDonald, Harry E.

2010-01-01

The United States ranking among the world in science, technology, engineering, and mathematics (STEM) education is decreasing. To counteract this problem NASA has made it part of its mission to promote STEM education among the nation s youth. Mockups can serve as a great tool when promoting STEM education in America. The Orion Cockpit Working Group has created a new program called Students Shaping America s Next Space Craft (SSANS) to outfit the Medium Fidelity Orion Mockup. SSANS will challenge the students to come up with unique designs to represent the flight design hardware. There are two main types of project packages created by SSANS, those for high school students and those for university students. The high school projects will challenge wood shop, metal shop and pre-engineering classes. The university projects are created mainly for senior design projects and will require the students to perform finite element analysis. These projects will also challenge the undergraduate students in material selection and safety requirements. The SSANS program will help NASA in its mission to promote STEM education, and will help to shape our nations youth into the next generation of STEM leaders.

Professional Socialization of Electrical Engineers in University Education

ERIC Educational Resources Information Center

Keltikangas, Kirsti; Martinsuo, Miia

2009-01-01

University educators constantly seek ways in which courses and curricula would promote students' professional development in line with the needs of industries. The purpose of this study was to develop a framework for analysing professional socialization particularly in the context of electrical engineering education and explore factors associated…

Knowledge Engineering for Young Scholars. Evaluation Report.

ERIC Educational Resources Information Center

Nye, Gloria T.

The Knowledge Engineering for Young Scholars (KEYS) Program was a National Science Foundation (NSF) program conducted at Louisiana State University during 1989 and 1990. The program's goals were to increase 8th-12th grade students' exposure to science, acquaint them with university research, stimulate interest in science, and build their…

Gender Disparities in Science and Engineering in Chinese Universities

ERIC Educational Resources Information Center

Guo, Congbin; Tsang, Mun C.; Ding, Xiaohao

2010-01-01

Gender disparities in science and engineering majors in Chinese universities have received increasing attention from researchers and educators in China in recent years. Using data from a national survey of college students who graduated in 2005, this study documents gender disparities in enrollment and academic performance in science and…

Teaching Ethics to Engineers: A Socratic Experience.

PubMed

Génova, Gonzalo; González, M Rosario

2016-04-01

In this paper we present the authors' experience of teaching a course in Ethics for Engineers, which has been delivered four times in three different universities in Spain and Chile. We begin by presenting the material context of the course (its place within the university program, the number of students attending, its duration, etc.), and especially the intellectual background of the participating students, in terms of their previous understanding of philosophy in general, and of ethics in particular. Next we set out the objectives of the course and the main topics addressed, as well as the methodology and teaching resources employed to have students achieve a genuine philosophical reflection on the ethical aspects of the profession, starting from their own mindset as engineers. Finally we offer some results based on opinion surveys of the students, as well as a more personal assessment by the authors, recapitulating the most significant achievements of the course and indicating its underlying Socratic structure.

Hands on Education Through Student-Industry Partnerships

NASA Astrophysics Data System (ADS)

Brown, J.; Wolfson, M.; Morris, K.

2013-09-01

Lockheed Martin Space Systems Company has invested in the future generation of engineers by partially funding and mentoring CubeSat projects around the country. One CubeSat in particular, ALL-STAR, has shown how this industry/university partnership benefits both the students and their mentors. Students gain valuable insight into aspects of spacecraft design that aren't taught in classes. They also start learning about industry processes for designing, building, and testing satellites before ever working in that environment. Because of this experience, industry is getting more qualified engineers starting fresh out of college. In addition Lockheed Martin's partnership with the university will allow them to use the students to help build affordable CubeSats for internal and customer's research and development projects. The mentoring also challenges the engineers to think differently about similar problems they face every day with their larger programs in order to make the solution simple and affordable.

Short educational programs in optical design and engineering

NASA Astrophysics Data System (ADS)

Voznesenskaya, Anna; Romanova, Galina; Bakholdin, Alexey; Tolstoba, Nadezhda; Ezhova, Kseniia

2016-09-01

Globalization and diversification of education in optical engineering causes a number of new phenomena in students' learning paths. Many students have an interest to get some courses in other universities, to study in international environment, to broaden not only professional skills but social links and see the sights as well etc. Participation in short educational programs (e.g. summer / winter schools, camps etc.) allows students from different universities to learn specific issues in their or in some neighbor field and also earn some ECTS for the transcript of records. ITMO University provides a variety of short educational programs in optical design and engineering oriented for different background level, such are: Introduction into optical engineering, Introduction into applied and computer optics, Optical system design, Image modeling and processing, Design of optical devices and components. Depending on students' educational background these programs are revised and adopted each time. Usually the short educational programs last 4 weeks and provide 4 ECTS. The short programs utilize a set of out-of date educational technologies like problem-based learning, case-study and distance-learning and evaluation. Practically, these technologies provide flexibility of the educational process and intensive growth of the learning outcomes. Students are satisfied with these programs very much. In their feedbacks they point a high level of practical significance, experienced teaching staff, scholarship program, excellent educational environment, as well as interesting social program and organizational support.

Environmental Engineering in Mining Engineering Education

ERIC Educational Resources Information Center

Mahamud-Lopez, Manuel Maria; Menendez-Aguado, Juan Maria

2005-01-01

In this paper, the current profile of the environmental engineer and the programming of the subject "Environmental Engineering and Technology" corresponding to the studies of Mining Engineering at the University of Oviedo in Spain, is discussed. Professional profile, student knowledge prior to and following instruction as well as…

Involving scientists in public and pre-college education at Princeton University

NASA Astrophysics Data System (ADS)

Steinberg, D. J.

2011-12-01

The Princeton Center for Complex Materials (PCCM) is a National Science Foundation (NSF) funded Materials Research Science and Engineering Center (MRSEC). As a MRSEC, it is part of the PCCM's mission to inspire and educate school children, teachers and the public about STEM and materials science. Research shows that it is critical to excite students at a young age and maintain that excitement, and without that these students are two to three times less likely to have any interest in science and engineering and pursue science careers as adults. We conduct over a dozen different education programs at Princeton University, in which scientists and engineers are directly involved with students, teachers and the public. As an ongoing MRSEC education and outreach program, we have developed many successful educational partnerships to increase our impact. The scientists and engineers who participate in our programs are leading experts in their research field and excellent communicators to their peers. They are not experts in precollege pedagogy or in communication to the public. Scientists often require some preparation in order to have the greatest chance of success. The amount and type of professional development required for these scientists to succeed in education programs depends on many factors. These include the age of the audience, the type of interaction, and the time involved. Also different researchers require different amount of help, advice, and training. Multiple education programs that involve Princeton University researchers will be discussed here. We will focus on what has worked best when preparing scientists and engineers for involvement in education programs. The Princeton University Materials Academy (PUMA) is a three week total immersion in science for minority high school students involving many faculty and their research groups. Our Making Stuff day reaches 100's of middle school students in which faculty interact directly with students and teachers at activity tables give auditorium presentations. Teacher development programs and holiday lectures will be highlighted as well.

Integrating design and communication in engineering education: a collaboration between Northwestern University and the Rehabilitation Institute of Chicago.

PubMed

Hirsch, Penny L; Yarnoff, Charles

2011-01-01

The required course for freshmen in Northwestern University's engineering school - a 2-quarter sequence called Engineering Design and Communication (EDC) - is noteworthy not only for its project-based focus on user-centered design, but also for its innovative integrated approach to teaching communication, teamwork, and ethics. Thanks to the collaboration between EDC faculty and staff at the Rehabilitation Institute of Chicago, EDC students, at the beginning of their education, experience the excitement of solving problems for real clients and users. At the same time, these authentic design projects offer an ideal setting for teaching students how to communicate effectively to different audiences and perform productively as team members and future leaders in engineering.

Engineering Students and Faculty Perceptions of Academic Dishonesty

ERIC Educational Resources Information Center

Tabsh, Sami W.; Abdelfatah, Akmal S.; El Kadi, Hany A.

2017-01-01

Purpose: This paper aims to survey students and faculty from the College of Engineering at an American university in the United Arab Emirates about their perception on different issues related to academic dishonesty. Opinions were sought on plagiarism, inappropriate collaboration, cheating on exams, copyright violations and complicity in academic…

Outcomes for Engineering Students Delivering a STEM Education and Outreach Programme

ERIC Educational Resources Information Center

Fitzallen, Noleine; Brown, Natalie Ruth

2017-01-01

University science outreach programmes are used to encourage more school students to select science, technology, engineering, and mathematics (STEM) subjects in further education and pursue science-related careers. The benefits of science outreach programmes are often espoused from the perspective of programme participants. Little attention,…

Decoding Student Satisfaction: How to Manage and Improve the Laboratory Experience

ERIC Educational Resources Information Center

Nikolic, Sasha; Ritz, Christian; Vial, Peter James; Ros, Montserrat; Stirling, David

2015-01-01

The laboratory plays an important role in teaching engineering skills. An Electrical Engineering department at an Australian University implemented a reform to monitor and improve student satisfaction with the teaching laboratories. A Laboratory Manager was employed to oversee the quality of 27 courses containing instructional laboratories.…

A Design-Based Engineering Graphics Course for First-Year Students.

ERIC Educational Resources Information Center

Smith, Shana Shiang-Fong

2003-01-01

Describes the first-year Introduction to Design course at Iowa State University which incorporates design for manufacturing and concurrent engineering principles into the curriculum. Autodesk Inventor was used as the primary CAD tool for parametric solid modeling. Test results show that student spatial visualization skills were dramatically…

Pedagogical Evaluation of Remote Laboratories in eMerge Project

ERIC Educational Resources Information Center

Lang, Daniela; Mengelkamp, Christoph; Jaeger, Reinhold S.; Geoffroy, Didier; Billaud, Michel; Zimmer, Thomas

2007-01-01

This study investigates opportunities for conducting electrical engineering experiments via the Internet rather than in an actual laboratory. Eighty-four French students of electrical engineering (semester 1, 2004) at Bordeaux University 1 participated in practical courses. Half of the students performed experiments in a laboratory while the other…

A Phenomenographic Study: First Year Chemical Engineering Students' Conceptions of Energy in Dissolution Processes.

ERIC Educational Resources Information Center

Lyle, Kenneth S.; Robinson, William R.

2002-01-01

Describes the work of Ebenezer and Fraser as an example of the use of phenomenographic research in categorizing concepts of the factors involved in the dissolution of ionic compounds by students entering a first-year chemical engineering course at a university in South Africa. (MM)

Sociotechnical Systems Design: An Engineering Program for Social-Science Students.

ERIC Educational Resources Information Center

Harrison, Howard L.; And Others

The University of Wisconsin College of Engineering's Sociotechnical Systems Design (STSD) Program, which was developed to provide social science students with systems concepts and basic technological skills necessary for attacking these problems, is considered. The need for such professionals, current educational responses, the organization of the…

Women's Experiences in the Engineering Laboratory in Japan

ERIC Educational Resources Information Center

Hosaka, Masako

2014-01-01

This qualitative study aims to examine Japanese women undergraduate engineering students' experiences of interacting with departmental peers of the same year in the laboratory setting by using interview data of 32 final-year students at two modestly selective national universities in Japan. Expectation state theory that explains unequal…

Developing Research Skills for Civil Engineers: A Library Contribution.

ERIC Educational Resources Information Center

Bruce, C. S.; Brameld, G. H.

1990-01-01

A library instruction program has been instituted in civil engineering at the Queensland University of Technology (Australia) in an effort to improve the research skills of fourth year students working on research projects. Students with extended library instruction were found to have better information-seeking behavior than others. (Author/MSE)

High School and College Kids Collaborate on BOTS Competition

ERIC Educational Resources Information Center

Hance, Dennis

2012-01-01

During the fall semester of 2010, mechanical engineering students from Edison State Community College and Wright State University shared their skills and knowledge with students from the Upper Valley JVS (UVJVS) pre-engineering technology program in a highly motivating robotics activity. The activity culminated in 47 teams from regional high…

Industrial Work Placement in Higher Education: A Study of Civil Engineering Student Engagement

ERIC Educational Resources Information Center

Tennant, Stuart; Murray, Mike; Gilmour, Bob; Brown, Linda

2018-01-01

For civil engineering undergraduates, short-term industrial work placement provides an invaluable learning experience. Notwithstanding the near-universal endorsement of short-term placement programmes, the resulting experience is rarely articulated through the student voice. This article provides an analysis of 174 questionnaires returned by…

Introducing Programmable Logic to Undergraduate Engineering Students in a Digital Electronics Course

ERIC Educational Resources Information Center

Todorovich, E.; Marone, J. A.; Vazquez, M.

2012-01-01

Due to significant technological advances and industry requirements, many universities have introduced programmable logic and hardware description languages into undergraduate engineering curricula. This has led to a number of logistical and didactical challenges, in particular for computer science students. In this paper, the integration of some…

The Fessenden Honors in Engineering Program

ERIC Educational Resources Information Center

Giazzoni, Michael

2018-01-01

Developing honors opportunities for students in engineering programs can be difficult, and the experience at the University of Pittsburgh is no exception. Often these students' degree requirements are so demanding that their opportunities for participating in honors experiences are severely limited. In each of the two semesters of their freshman…

Personal Study Planning in Doctoral Education in Industrial Engineering

ERIC Educational Resources Information Center

Lahenius, K.; Martinsuo, M.

2010-01-01

The duration of doctoral studies has increased in Europe. Personal study planning has been considered as one possible solution to help students in achieving shorter study times. This study investigates how doctoral students experience and use personal study plans in one university department of industrial engineering. The research material…

Global Environmental Priorities of Engineering Students in Krakow Poland.

ERIC Educational Resources Information Center

Robinson, Michael; Bowen, William M.

2000-01-01

Reports and interprets the rankings of Rodger Bybee's 12 global-environmental issues/threats by first and second year engineering students (n=175) at the Technical University of Krakow, Poland. Results indicate that personal experience with local environmental issues are the most important determinant for ranking global environmental threats.…

A Multidisciplinary Engineering Summer School in an Industrial Setting

ERIC Educational Resources Information Center

Larsen, Peter Gorm; Fernandes, Joao M.; Habel, Jacek; Lehrskov, Hanne; Vos, Richard J. C.; Wallington, Oliver; Zidek, Jan

2009-01-01

Most university-level engineering studies produce technically skilled engineers. However, typically students face several difficulties when working in multidisciplinary teams when they initiate their industrial careers. In a globalised world, it becomes increasingly important that engineers are capable of collaborating across disciplinary…

Understanding initial undergraduate expectations and identity in computing studies

NASA Astrophysics Data System (ADS)

Kinnunen, Päivi; Butler, Matthew; Morgan, Michael; Nylen, Aletta; Peters, Anne-Kathrin; Sinclair, Jane; Kalvala, Sara; Pesonen, Erkki

2018-03-01

There is growing appreciation of the importance of understanding the student perspective in Higher Education (HE) at both institutional and international levels. This is particularly important in Science, Technology, Engineering and Mathematics subjects such as Computer Science (CS) and Engineering in which industry needs are high but so are student dropout rates. An important factor to consider is the management of students' initial expectations of university study and career. This paper reports on a study of CS first-year students' expectations across three European countries using qualitative data from student surveys and essays. Expectation is examined from both short-term (topics to be studied) and long-term (career goals) perspectives. Tackling these issues will help paint a picture of computing education through students' eyes and explore their vision of its and their role in society. It will also help educators prepare students more effectively for university study and to improve the student experience.

Educating next-generation civil engineers about smart structures technology

NASA Astrophysics Data System (ADS)

Zhang, Yunfeng

2005-05-01

The implementation of smart structures technology in the design, construction and maintenance of civil and mechanical systems have been shown beneficial to the performance enhancement, operating efficiency and reliability of structural systems. However, most of today's engineering students are unaware of the remarkable properties of smart sensors and many applications of smart structures technology. It is thus desirable to prepare the future engineers of the society for the cutting-edge technologies in smart structures, for which they may see broad application in their generation. Pioneering work in incorporating smart structures technologies into civil engineering curriculum has been done by the writer at Lehigh University and is described in this paper. In particular, a graduate-level course entitled "Smart Structural Systems" has been taught in the Spring Semester of Year 2004 at Lehigh University. To better convey the course material to students, a smart structures test-bed, which is used not only to showcase various technological aspects of a smart structural system but also offer students an opportunity to gain hands-on experience by doing experiments has been under development at Lehigh University. The hands-on experience that could be developed with the smart structures test-bed is believed being essential for students to have a good understanding and mastering of the smart structures technologies.

Demanded competences in the agricultural engineering sector in Spain

NASA Astrophysics Data System (ADS)

Perdigones, A.; García, J. L.; Benavente, R. M.; Tarquis, A. M.

2009-04-01

An engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that combine creativity and imagination with rigour and discipline. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities. Training in the use of certain skills or competences may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which skills are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. Three surveys were undertaken to determine which skills are demanded by agricultural engineers in their professional activities in Spain. Surveys were carried out by the Department of Rural Engineering, Technical University of Madrid (Spain), analysing two related degrees (agricultural engineer with a duration of the study plan of three and five years, respectively) during the courses 2006/07 and 2007/08. The first survey determined the competences acquired by the students along their academic studies (371 students interviewed). The second survey determined the skills demanded by the enterprises of the agricultural sector (50 enterprises interviewed). The third survey determined the skills demanded by the agricultural engineers working in the sector (70 engineers interviewed), specifically asking about the computer programs used by practising agricultural engineers. Surveys showed important differences between the competences demanded by the enterprises and the competences acquired by the students at the university. Enterprises mainly demanded general competences (team working, time organizing, and skills with computer programs) and were less interested in specific technical skills (engineering, economy, biological competences). These differences suggest it might be a good idea to increase the amount of time devoted to the skills demanded by the enterprises. The software packages most commonly used by practising engineers were Microsoft Office / Excel (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of the demanded competences. The results of this survey underline the importance of competence training in this and perhaps other fields of engineering.

Development of university-industry partnerships in railroad engineering education

NASA Astrophysics Data System (ADS)

Lautala, Pasi T.

Rail transportation has been an important part of the North American transportation network since the 19th century and it continues to be a major contributor to the economic well-being and the global competitiveness of the U.S. The recent expansion in freight rail volumes and forecasts for continuous growth, together with more favorable attitudes for urban passenger rail present several challenges for the rail industry. One of the challenges is the availability of a well educated engineering workforce. The rail industry has recognized a need to attract new railroad professionals from various disciplines for management and technical positions, but most universities eliminated railroad engineering from their curricula after the recruitment levels faded several decades ago. Today, railroad expertise and related engineering courses exist at only a few universities and most students graduate without any exposure to rail topics. While industry representatives have expressed their concern about a future workforce, little data is available on the extent of the demand, on the characteristics and skills of preferred candidates, and on the role that universities can play. A benchmarking study was undertaken to investigate the demand for university engineering graduates and assess whether current methods are sufficient to attract, educate, recruit, train and retain engineering students in the railroad profession. Data was collected from industry human resources and training managers to define the quantitative and qualitative needs for railroad engineers. In addition, recently hired engineers working in the rail industry were surveyed to determine the extent of their university exposure in rail topics and how it affected their career choice. The surveys indicated an increase of over 300 percent in the annual recruitment for railroad engineers by the participating companies between 2002 and 2005. Recruitment levels are expected to remain high for the next five to ten years due to high demand for rail transportation and an older engineering workforce with the greatest demand for civil, electrical and mechanical engineers with bachelor's degrees. The rail industry and universities have grown apart over the past several decades, as rail programs and courses were abandoned at universities and there were very limited recruitment and research activities by the railroads at universities. Today, specialized course(s) in rail topics are offered at approximately three percent of ABET accredited civil engineering programs in the U.S. and only 16 percent of engineers who responded to the survey had received university exposure to rail topics. The research findings suggest that increased university participation has the potential to assist the rail industry in all aspects related to attracting, educating, recruiting, training and retaining engineering graduates. The primary advantages would be greater industry visibility and student knowledge in rail topics. Increased prior knowledge, on the other hand, improves the effectiveness of industry training programs and offers a potential for sizable training cost reductions. As a final conclusion, the research suggests that the most effective approach for developing future railroad engineers is a balancing act where the responsibilities should be shared by the rail industry and universities based on each others strengths. University participation should include multiple types and levels, including introductory lectures, co-op/internship programs, courses in railroad engineering, and a minor or certificate in railroad engineering that would include several courses. Due to the urgent demand for railroad engineers and time it takes to rebuild the expertise on campuses, the development process should begin immediately, be incremental, and utilize concepts, such as cooperation with other universities or engineer-in-residence, that reduce the demand of internal university resources. The challenges to the process, such as willingness of partners to understand each others needs and motivations for the relationship should be alleviated by developing performance goals and measures of success. While it is impossible to evaluate all aspects of university level railroad engineering education in one study, this research suggests that there are opportunities for a partnership between the rail industry and universities. The purpose of this research was to identify those opportunities and increase the understanding of the forces that shape the demand for railroad engineers and engineering education. The findings can be used both by the rail industry and the universities as they initiate change in the current processes and thrive to develop railroad engineers to meet the demands of the 21 st century.

Research Institute for Technical Careers

NASA Technical Reports Server (NTRS)

Glenn, Ronald L.

1996-01-01

The NASA research grant to Wilberforce University enabled us to establish the Research Institute for Technical Careers (RITC) in order to improve the teaching of science and engineering at Wilberforce. The major components of the research grant are infrastructure development, establishment of the Wilberforce Intensive Summer Experience (WISE), and Joint Research Collaborations with NASA Scientists. (A) Infrastructure Development. The NASA grant has enabled us to improve the standard of our chemistry laboratory and establish the electronics, design, and robotics laboratories. These laboratories have significantly improved the level of instruction at Wilberforce University. (B) Wilberforce Intensive Summer Experience (WISE). The WISE program is a science and engineering bridge program for prefreshman students. It is an intensive academic experience designed to strengthen students' knowledge in mathematics, science, engineering, computing skills, and writing. (C) Joint Collaboration. Another feature of the grant is research collaborations between NASA Scientists and Wilberforce University Scientists. These collaborations have enabled our faculty and students to conduct research at NASA Lewis during the summer and publish research findings in various journals and scientific proceedings.

Mathematics and its value for engineering students: what are the implications for teaching?

NASA Astrophysics Data System (ADS)

Harris, Diane; Black, Laura; Hernandez-Martinez, Paul; Pepin, Birgit; Williams, Julian; with the TransMaths Team

2015-04-01

Mathematics has long been known to be problematic for university engineering students and their teachers, for example, Scanlan.[1] This paper presents recent data gathered from interviews with engineering students who experienced problems with mathematics and their lecturers during their transition through the first year in different programme contexts. Our interviews with the students reveal how they understand the relation between engineering and mathematics and we draw on the concept of 'use- and exchange-value' to explore this relationship more fully. This paper challenges both the pedagogical practice of teaching non-contextualized mathematics and the lack of transparency regarding the significance of mathematics to engineering. We conclude that the value of mathematics in engineering remains a central problem, and argue that mathematics should be a fundamental concern in the design and practice of first-year engineering.

The Engineer and the Societal Dilemma: An Interdisciplinary Approach.

ERIC Educational Resources Information Center

Coleman, Robert J.

The University of North Carolina's Electrical Engineering Department developed and delivered a course for undergraduate engineering students. The course integrated technical, social, and ethical perspectives on problems and issues faced in the world of practicing engineers. It achieved this integration by making use of professors in engineering,…

An Educational Program of Mechatronics for Multidisciplinary Knowledge Acquisition

NASA Astrophysics Data System (ADS)

Watanuki, Keiichi; Kojima, Kazuyuki

Recently, as the technologies surrounding mechanical engineering have improved remarkably, the expectations for students who graduate from departments of mechanical engineering have increased. For example, in order to develop a mechatronics system, a student needs to integrate a wide variety of technologies, such as mechanical engineering, electrical and electronics engineering, and information technology. Therefore, from the perspective of educators, the current education system, which stresses expertizing each technology, should be replaced by an education system that stresses integrating multidisciplinary knowledge. In this paper, a trial education program for students of the department of mechanical engineering in our university, in which students are required to integrate multidisciplinary knowledge in order to develop a biologically-based robot, is described. Finally, the efficacy of the program is analyzed.

An exploration of students' perceptions and attitudes towards creativity in engineering education

NASA Astrophysics Data System (ADS)

Waller, David R.

This study used a mixed methods approach to develop a broad and deep understanding of students’ perceptions towards creativity in engineering education. Studies have shown that students’ attitudes can have an impact on their motivation to engage in creative behavior. Using an ex-post facto independent factorial design, attitudes of value towards creativity, time for creativity, and creativity stereotypes were measured and compared across gender, year of study, engineering discipline, preference for open-ended problem solving, and confidence in creative abilities. Participants were undergraduate engineering students at Queen’s University from all years of study. A qualitative phenomenological methodology was adopted to study students’ understandings and experiences with engineering creativity. Eleven students participated in oneon- one interviews that provided depth and insight into how students experience and define engineering creativity, and the survey included open-ended items developed using the 10 Maxims of Creativity in Education as a guiding framework. The findings from the survey suggested that students had high value for creativity, however students in fourth year or higher had less value than those in other years. Those with preference for open-ended problem solving and high confidence valued creative more than their counterparts. Students who preferred open-ended problem solving and students with high confidence reported that time was less of a hindrance to their creativity. Males identified more with creativity stereotypes than females, however overall they were both low. Open-ended survey and interview results indicated that students felt they experienced creativity in engineering design activities. Engineering creativity definitions had two elements: creative action and creative characteristic. Creative actions were associated with designing, and creative characteristics were predominantly associated with novelty. Other barriers that emerged from the qualitative analysis were lack of opportunity, lack of assessment, and discomfort with creativity. It was concluded that a universal definition is required to establish clear and aligned understandings of engineering creativity. Instructors may want to consider demonstrating value by assessing creativity and establishing clear criteria in design projects. It is recommended that students be given more opportunities for practice through design activities and that they be introduced to design and creative thinking concepts early in their engineering education.

Building Relationships, Sharing Resources, and Opening Opportunities: A STEM Learning Community Builds Social Capital for Students with Disabilities

ERIC Educational Resources Information Center

Whitney, Jean; Langley-Turnbaugh, Samantha; Lovewell, Lynn; Moeller, Babette

2012-01-01

This article describes a learning community designed for university students with disabilities in science, technology, engineering, and math (STEM) majors at the University of Southern Maine. The Learning Community (LC) seminar is a credit-bearing class and part of a pipeline of supports and services for high school and college students with…

Why Girl Students Achieve English Presentation Learning Significantly Better in Shanghai University of Engineering Science (SUES)

ERIC Educational Resources Information Center

Zhu, Wen; Liu, Zhixin

2017-01-01

In non literature major dominated university, it is obviously noted that girl students' English (as the second language) presentation scores often higher than boy students in the same teaching environment and evaluation system. A 397 samples' survey has been studied from the aspects of after school activities and sleep schedule to discuss if any…

"Finger Kits:" An Interactive Demonstration of Biomaterials and Engineering for Elementary School Students

ERIC Educational Resources Information Center

Canavan, Heather E.; Stanton, Michael; Lopez, Kaori; Grubin, Catherine; Graham, Daniel J.

2008-01-01

This article describes a hands-on activity and demonstration developed at the University of Washington and further reined at the University of New Mexico. In this activity, the authors present a real-world problem to the student: Someone has an injured finger joint, and the students in the class need to design an implant to replace it. After…

Self-Image and Expectations of First Year Engineering Students in a Brazilian University.

ERIC Educational Resources Information Center

de Campos, Reinaldo Calixto; Grinberg, Patricia; Garcia, Ivan; Parise, Jose Alberto; da Silveira, Marcos Azevedo; Dumont, Ney

This paper is an attempt to comprehend, in a more objective way, the students undertaking the second semester at the Technical and Scientific Center from the Pontifical Catholic University of Rio de Janeiro (PUC-Rio). The research was carried out at the beginning of the semester, in one of the classes formed by students undertaking General…

Training the next generation of Space and Earth Science Engineers and Scientists through student design and development of an Earth Observation Nanosatellite, AlbertaSat-1

NASA Astrophysics Data System (ADS)

Lange, B. A.; Bottoms, J.

2011-12-01

This presentation addresses the design and developmental process of a Nanosatellite by an interdisciplinary team of undergraduate and graduate students at the University of Alberta. The Satellite, AlbertaSat-1, is the University of Alberta's entry in the Canadian Satellite Design Challenge (CDSC); an initiative to entice Canadian students to contribute to space and earth observation technologies and research. The province of Alberta, while home to a few companies, is very limited in its space industry capacity. The University of Alberta reflects this fact, where one of the major unifying foci of the University is oil, the provinces greatest resource. For students at the U of A, this lack of focus on astronautical, aerospace and space/earth observational research limits their education in these industries/disciplines. A fully student operated project such as AlbertaSat-1 provides this integral experience to almost every discipline. The AlbertaSat-1 team is comprised of students from engineering, physics, chemistry, earth and atmospheric science, business, and computer science. While diverse in discipline, the team is also diverse in experience, spanning all levels from 1st year undergraduate to experienced PhD. Many skill sets are required and the diverse group sees that this is covered and all opinions voiced. Through immersion in the project, students learn quickly and efficiently. The necessity for a flawless product ensures that only the highest quality of work is presented. Students participating must research and understand their own subsystem as well as all others. This overall system view provides the best educational tool, as students are able to see the real impacts of their work on other subsystems. As the project is completely student organized, the participants gain not only technical engineering, space and earth observational education, but experience in operations and financial management. The direct exposure to all aspects of the space and earth science industry through a student satellite development program is one of the best methods of developing the next generation of space and earth science engineers and scientists.

Labour perspectives of engineering degrees in the European Higher Education Area (EHEA): a case of study in the University of Cordoba (Spain)

NASA Astrophysics Data System (ADS)

Taguas, E. V.; Redel, M. D.; Pérez, R.; Peña, A.

2009-04-01

The Bologna process is reaching its final stages and is causing controversy among students. The adaptation of European universities to the European Higher Education Area (EHEA) entails not only the modification of curricular programmes and the nomenclature and duration of degrees, but also the incorporation of new teaching strategies aimed at ensuring that students acquire transversal skills and aptitudes and at increasing student participation in the teaching-learning process. A number of surveys have been carried out during the last few courses among students doing degrees in engineering (Industrial Engineering, Agronomy Engineering and Forestry Engineering). These surveys include questions on their knowledge of Bologna process, its advantages and drawbacks, their opinion about optional masters or doctorate degrees, what perspectives their degrees have on the labour market and suggestions for improvement. Although the different degrees showed notable differences, the content of EHEA is well-known by less than 30% of students, while 40% of them state they know about their perspectives on the labour market. The main advantages of EHEA were related to the improvement of practical knowledge in the subjects, the recognition of degrees in Europe and wider working opportunities. The main drawbacks pointed out were worse and shorter training periods, higher costs and fiercer competition between different degrees. In addition, they suggested that the new degrees are better adjusted to the demands of the labour market. 60% and 40% of them, respectively, approved of Masters degrees and PhDs. These features should be taken into account to organize and improve the contents of the degrees as well as to involve the students in the future of University education.

Gummi-Bears On Fire! Bringing Students and Scientists Together at the Alaska Summer Research Academy (ASRA)

NASA Astrophysics Data System (ADS)

Drake, J.; Schamel, D.; Fisher, P.; Terschak, J. A.; Stelling, P.; Almberg, L.; Phillips, E.; Forner, M.; Gregory, D.

2002-12-01

When a gummi-bear is introduced into hot potassium chlorate there is a powerful reaction. This is analogous to the response we have seen to the Alaska Summer Research Academy (ASRA). ASRA is a residential science research camp supported by the College of Science, Engineering and Mathematics at the University of Alaska Fairbanks. The hallmark of ASRA is the opportunity for small groups of 4 or fewer students, ages 10-17, to conduct scientific research and participate in engineering design projects with university faculty and researchers as mentors. Participating scientists, engineers, faculty, graduate students, and K-12 teachers from a variety of disciplines design individual research units and guide the students through designing and constructing a project, collecting data, and synthesizing results. The week-long camp culminates with the students from each project making a formal presentation to the camp and public. In its second year ASRA is already a huge success, quadrupling in size from 21 students in 2001 to 89 students in 2002. Due to a high percentage of returning students, we anticipate there will be a waiting list next year. This presentation contains perspectives from administrators, instructors, staff, and students. Based on our experience we feel there is a large potential demand for education and public outreach (EPO) in university settings. We believe the quality and depth of the ASRA experience directly contributes to the success of a worthwhile EPO program. ASRA will be portrayed as a useful model for EPO at other institutions.

Stereotype Threat: A Qualitative Study of the Challenges Facing Female Undergraduate Engineering Students

NASA Astrophysics Data System (ADS)

Entsminger, J. R., II

From a sociocultural point of view, this qualitative case study explored how upper-level, female undergraduate engineering students perceived the possibility of or experience with stereotype threat as shaping their experiences. The study also investigated how these students explained their reasons for choosing their engineering major, the challenges they encountered in the major, and their reasons for persevering in spite of those challenges. Using Steele and Aronson's (1995) stereotype threat theory as a framework, and considering the documented underrepresentation of females in engineering, the study sought to examine how stereotype threat shaped the experiences of these students and if stereotype threat could be considered a valid reason for the underrepresentation. The study was conducted at a large, four-year public university. First, students in the College of Engineering and Engineering Technology completed the Participant Screening Survey. Based on responses from the survey, six female engineering students from the college were identified and invited to participate in the study. The participants came from the following majors: Electrical Engineering, Industrial and Systems Engineering, and Mechanical Engineering. After receiving the study consent letter and agreeing to participate, the students were involved in a 90-minute focus group meeting, a 45-minute one-on-one interview, and a 30-minute follow-up interview. After conducting the data collection methods, the data were then transcribed, analyzed, and coded for theme development. The themes that emerged coincided with each research question. The themes highlighted the complex interactions and experiences shared by the female engineering majors. The female students were enveloped in an environment where there existed an increased risk for activating stereotype threat. In addition, the female students described feeling pushed to prove to themselves and to others that the negative stereotype that 'females are bad at engineering' was untrue. The findings illustrated the need for systematic changes at the university level. Intervention recommendations were provided. In regards to female underrepresentation in science fields, including engineering, stereotype threat certainly had the potential to cause the female students to question themselves, their abilities, their choice of an academic major, and subsequently remove themselves from a hostile learning or working environment. Thus, educational institutions and workplace organizations are responsible for not only educating themselves regarding stereotype threat, but also for taking steps to alleviate the pernicious effects of stereotype threat.

Professional Skills in the Engineering Curriculum

ERIC Educational Resources Information Center

Mohan, Ashwin; Merle, Dominike; Jackson, Christa; Lannin, John; Nair, Satish S.

2010-01-01

Faculty from the Department of Electrical and Computer Engineering and the College of Education at the University of Missouri (MU), Columbia, developed a novel course for engineering graduate students emphasizing pedagogy and professional skills. The two-semester course sequence, titled "Preparing Engineering Faculty and Professionals,"…

Effects of a Problem-Based Learning Program on Engineering Students' Academic Achievements, Skills Development and Attitudes in a Mexican University.

ERIC Educational Resources Information Center

Polanco, Rodrigo; Calderon, Patricia; Delgado, Franciso

A 3-year follow-up evaluation was conducted of an experimental problem-based learning (PBL) integrated curriculum directed to students of the first 2 years of engineering. The PBL curriculum brought together the contents of physics, mathematics, and computer science courses in a single course in which students worked on real-life problems. In…

An Appraisal of an Online Tutorial System for the Teaching and Learning of Engineering Physics in Conjunction with Contextual Physics and Mathematics, and Relevant Mathematics

ERIC Educational Resources Information Center

Bhathal, Ragbir

2016-01-01

The number of students entering engineering schools in Australian universities has increased tremendously over the last few years because of the Australian Federal Government's policy of increasing the participation rates of Higher School Certificate students and students from low social economic status backgrounds in the tertiary sector. They now…

Effectiveness of Cooperative Learning (Jigsaw II) Method in Teaching English as a Foreign Language to Engineering Students (Case of Firat University, Turkey)

ERIC Educational Resources Information Center

Gomleksiz, M. N.

2007-01-01

The present study compares the effects of the cooperative jigsaw II method and traditional teacher-centred teaching method on improving vocabulary knowledge and active-passive voice in English as a foreign language for engineering students and the students' attitudes towards learning English. Jigsaw is a cooperative learning model that involves…

Fitting in and feeling good: the relationships among peer alignment, instructor connectedness, and self-efficacy in undergraduate satisfaction with engineering

NASA Astrophysics Data System (ADS)

Micari, Marina; Pazos, Pilar

2016-07-01

This study examined the relationships among peer alignment (the feeling that one is similar in important ways to one's engineering peers), instructor connectedness (the sense that one knows and looks up to academic staff/faculty members in the department), self-efficacy for engineering class work (confidence in one's ability to successfully complete engineering class work), and engineering students' satisfaction with the major. A total of 135 sophomore (second-year university students) and junior (third-year students) engineering students were surveyed to measure these three variables. A multiple regression analysis showed that self-efficacy, peer alignment, and instructor connectedness predicted student satisfaction with the major, and that self-efficacy acted as a mediator between both peer alignment and instructor connectedness on the one hand, and satisfaction on the other. The authors offer suggestions for practice based on the results.

INCREASING DIVERSITY IN ENVIRONMENTAL SCIENCE AND ENGINEERING: THE ORD RESEARCH APPRENTICESHIP PROGRAM FOR HIGH SCHOOL STUDENTS

EPA Science Inventory

The "Research Apprenticeship Program for High School Students" began in 1990 as a collaborative effort between EPA's Office of Research and Development in Research Triangle Park, NC and Shaw University, an Historically Black College/University (HBCU) in Raleigh, NC. The program a...

Using NMR to Expand Chemistry Research and Educational Experiences at North Carolina Central University, an Historically Black University

DTIC Science & Technology

analytical chemistry . Most students do not get hands-on training with an NMR within their classroom or laboratory courses. The NMR will provide...unique opportunities to our students as they train to become the next generation of scientists, doctors, and engineers .

Academic Achievement and Formal Thought in Engineering Students

ERIC Educational Resources Information Center

Vazquez, Stella Maris; de Anglat, Hilda Difabio

2009-01-01

Introduction: Research on university-level academic performance has significantly linked failure and dropping out to formal reasoning deficiency. We have not found any papers on formal thought in Argentine university students, in spite of the obvious shortcomings observed in the classrooms. Thus, the main objective of this paper was exploring the…

Improving Educational Objectives of the Industrial and Management Systems Engineering Programme at Kuwait University

ERIC Educational Resources Information Center

Aldowaisan, Tariq; Allahverdi, Ali

2016-01-01

This paper describes the process of developing programme educational objectives (PEOs) for the Industrial and Management Systems Engineering programme at Kuwait University, and the process of deployment of these PEOs. Input of the four constituents of the programme, faculty, students, alumni, and employers, is incorporated in the development and…

National Science Foundation 1989 Engineering Senior Design Projects To Aid the Disabled.

ERIC Educational Resources Information Center

Enderle, John D., Ed.

Through the Bioengineering and Research to Aid the Disabled program of the National Science Foundation, design projects were awarded competitively to 16 universities. Senior engineering students at each of the universities constructed custom devices and software for disabled individuals. This compendium contains a description of each project in…

Applicability of Online Education to Large Undergraduate Engineering Courses

NASA Astrophysics Data System (ADS)

Bir, Devayan Debashis

With the increase in undergraduate engineering enrollment, many universities have chosen to teach introductory engineering courses such as Statics of Engineering and Mechanics of Materials in large classes due to budget limitations. With the overwhelming literature against traditionally taught large classes, this study aims to see the effects of the trending online pedagogy. Online courses are the latest trend in education due to the flexibility they provide to students in terms of schedule and pace of learning with the added advantage of being less expensive for the university over a period. In this research, the effects of online lectures on engineering students' course performances and students' attitudes towards online learning were examined. Specifically, the academic performances of students enrolled in a traditionally taught, lecture format Mechanics of Materials course with the performance of students in an online Mechanics of Materials course in summer 2016 were compared. To see the effect of the two different teaching approaches across student types, students were categorized by gender, enrollment status, nationality, and by the grades students obtained for Statics, one of the prerequisite courses for Mechanics of Materials. Student attitudes towards the online course will help to keep the process of continuously improving the online course, specifically, to provide quality education through the online medium in terms of course content and delivery. The findings of the study show that the online pedagogy negatively affects student academic performance when compared to the traditional face-to-face pedagogy across all categories, except for the high scoring students. Student attitudes reveal that while they enjoyed the flexibility schedule and control over their pace of studying, they faced issues with self-regulation and face-to-face interaction.

Undergraduate Students As Effective Climate Change Communicators

NASA Astrophysics Data System (ADS)

Sharif, H. O.; Joseph, J.; Mullendore, G. L.

2014-12-01

The University of Texas at San Antonio (UTSA), San Antonio College (SAC), and the University of North Dakota (UND) have partnered with NASA to provide underrepresented undergraduates from UTSA, SAC, and other community colleges climate-related research and education experiences through the Climate Change Communication: Engineer, Environmental science, and Education (C3E3) project. The program aims to develop a robust response to climate change by providing K-16 climate change education; enhance the effectiveness of K-16 education particularly in engineering and other STEM disciplines by use of new instructional technologies; increase the enrollment in engineering programs and the number of engineering degrees awarded by showing engineering's usefulness in relation to the much-discussed contemporary issue of climate change; increase persistence in STEM degrees by providing student research opportunities; and increase the ethnic diversity of those receiving engineering degrees and help ensure an ethnically diverse response to climate change. Students participated in the second summer internship funded by the project. The program is in its third year. More than 75 students participated in a guided research experiences aligned with NASA Science Plan objectives for climate and Earth system science and the educational objectives of the three institutions. The students went through training in modern media technology (webcasts), and in using this technology to communicate the information on climate change to others, especially high school students, culminating in production of webcasts on investigating the aspects of climate change using NASA data. Content developed is leveraged by NASA Earth observation data and NASA Earth system models and tools. Three Colleges were involved in the program: Engineering, Education, and Science.

A hermeneutic phenomenological study of the experiences of female African American undergraduate engineering students at a predominantly White and an historically Black institution

NASA Astrophysics Data System (ADS)

Frillman, Sharron Ann

2011-12-01

This phenomenological study examined the experiences of twelve female African Americans enrolled as fulltime undergraduate engineering students at North Carolina Agricultural and Technical State University, an historically Black university, and seven female African Americans enrolled as undergraduate engineering students at Purdue University in West Lafayette, Indiana, a traditionally White institution. Interviews provided insights into the "lived" experiences of these young women and the factors they believe have contributed to their success in their respective engineering programs. Data analysis involved coding each participant's responses to interview questions using Atlas.ti, a powerful qualitative data analysis tool. This generated 181 codes that were further categorized into nine emergent themes, indicating the potential for extensive associations among the variables. The emergent themes are as follows: (1) Demographic information/special circumstances, (2) Personal attributes and characteristics, (3) Personal insights, (4) Sense of mission, (5) Sources of negative stress, (6) Success strategies, (7) Various forms of support, (8) Would/would not have made it to where she is now, and (9) Being African American and female in engineering. Analysis of these themes and their relationships led to the development of the Frillman Model of Emergent Themes in Female African American Engineering Students. Success. In addressing similarities and differences, three overriding theme categories emerged. These were: (1) Four personhood themes and dual social identity theme; (2) Environmental input and response theme; and (3) Outcome emergent theme of Would/Would not have made it to where she is now. Recommendations were made for future research to expand upon this exploratory study.

"Hungry for Hands-on": Talented, Inner-City Engineering Students, Applied Learning and Employer Engagement in a Vocational-Learning Trajectory

ERIC Educational Resources Information Center

Haight, Annie

2012-01-01

This paper analyses the findings of a case study into the attitudes and experiences of engineering students and teachers on a vocational education trajectory from the 14-19 Diploma in Engineering through post-16 vocational courses to a university Access course. The research took place in 2008-2009 in a deprived inner city area of London. A…

Freshman Engineering Students At-Risk of Non-Matriculation: Self-Efficacy for Academic Learning

ERIC Educational Resources Information Center

Ernst, Jeremy V.; Bowen, Bradley D.; Williams, Thomas O.

2016-01-01

Students identified as at-risk of non-academic continuation have a propensity toward lower academic self-efficacy than their peers (Lent, 2005). Within engineering, self-efficacy and confidence are major markers of university continuation and success (Lourens, 2014 Raelin, et al., 2014). This study explored academic learning self-efficacy specific…

COMPARISON OF AN ENGINE OPERATED ON CANOLA BASED BIODIESEL TO AN ENGINE OPERATED ON PETROLEUM DIESEL

EPA Science Inventory

The educational mission of the university will be met in two ways. First, students who are involved in the project will enhance their learning through their participation in the interdisciplinary solution of a real-world problem. Second, the students will demonstrate the v...

Improving the Latin American Engineering Student's Experience in the U.S. University.

ERIC Educational Resources Information Center

Rogers, Kenneth A.

This report resulted from a conference convened to discuss the special needs of Latin American students in the US and the relationship between academic courses offered and educational needs and career opportunities at home. The conference focused on business administration and engineering, fields attracting the largest number of Latin American…

Five Women in Science, Technology, Engineering, and Mathematics Majors: A Portraiture of Their Lived Experiences

ERIC Educational Resources Information Center

Torcivia, Patrice Prusko

2012-01-01

Numerous studies have addressed science, technology, engineering and mathematics (STEM) and their relation to education and gender ranging from elementary school pedagogy to career choices for traditional-aged college students. Little research has addressed nontraditional female students returning to the university to in the STEM fields. This…

Initiatives to Foster Engineering Student Motivation: A Case Study

ERIC Educational Resources Information Center

Reyes, Encarnación; Enfedaque, Alejandro; Gálvez, Jaime C.

2017-01-01

There is little doubt that student motivation is essential in providing a beneficial learning experience. One way to produce such motivation is to stimulate it through suitable assessment methods. This paper shares the experience acquired by the authors, who are university lecturers in Civil Engineering at the Universidad Politécnica de Madrid,…

Analysis of Arguments Constructed by First-Year Engineering Students Addressing Electromagnetic Induction Problems

ERIC Educational Resources Information Center

Almudi, Jose Manuel; Ceberio, Mikel

2015-01-01

This study explored the quality of arguments used by first-year engineering university students enrolled in a traditional physics course dealing with electromagnetic induction and related problem solving where they had to assess whether the electromagnetic induction phenomenon would occur. Their conclusions were analyzed for the relevance of the…

The Effects of Maple Integrated Strategy on Engineering Technology Students' Understanding of Integral Calculus

ERIC Educational Resources Information Center

Salleh, Tuan Salwani; Zakaria, Effandi

2016-01-01

The objective of this research is to investigate the effectiveness of a learning strategy using Maple in integral calculus. This research was conducted using a quasi-experimental nonequivalent control group design. One hundred engineering technology students at a technical university were chosen at random. The effectiveness of the learning…

Making Sense of Curriculum--The Transition into Science and Engineering University Programmes

ERIC Educational Resources Information Center

Ulriksen, Lars; Holmegaard, Henriette T.; Madsen, Lene Møller

2017-01-01

Research on students' transition, retention and experiences in science, technology, engineering and mathematics (STEM) has increasingly focused on identity formation and on students' integration in the study programmes. However, studies focusing on the role of the curriculum in this process at the level of higher education are scarce. The present…

Perspectives on Peer-Mentoring from Taiwanese Science and Engineering Master's Students

ERIC Educational Resources Information Center

Lin, Yii-nii

2014-01-01

The purpose of this study is to describe the peer-mentoring experience from the perspective of 16 master's students majoring in science or engineering at a research-oriented university in Taiwan. Utilizing a qualitative method of phenomenology, these mentees shared their views about their peer-mentors through in-depth interviews. Participants…

Competences in Demand within the Spanish Agricultural Engineering Sector

ERIC Educational Resources Information Center

Perdigones, Alicia; Valera, Diego Luis; Moreda, Guillermo Pedro; García, Jose Luis

2014-01-01

The Rural Engineering Department (Technical University of Madrid) ran three competence surveys during the 2006-2007 and 2007-2008 academic years and evaluated: (1) the competences gained by agricultural engineer's degree and agricultural technical engineer's degree students (360 respondents); (2) the competences demanded by agricultural employers…

Computer Vision Syndrome and Associated Factors Among Medical and Engineering Students in Chennai

PubMed Central

Logaraj, M; Madhupriya, V; Hegde, SK

2014-01-01

Background: Almost all institutions, colleges, universities and homes today were using computer regularly. Very little research has been carried out on Indian users especially among college students the effects of computer use on the eye and vision related problems. Aim: The aim of this study was to assess the prevalence of computer vision syndrome (CVS) among medical and engineering students and the factors associated with the same. Subjects and Methods: A cross-sectional study was conducted among medical and engineering college students of a University situated in the suburban area of Chennai. Students who used computer in the month preceding the date of study were included in the study. The participants were surveyed using pre-tested structured questionnaire. Results: Among engineering students, the prevalence of CVS was found to be 81.9% (176/215) while among medical students; it was found to be 78.6% (158/201). A significantly higher proportion of engineering students 40.9% (88/215) used computers for 4-6 h/day as compared to medical students 10% (20/201) (P < 0.001). The reported symptoms of CVS were higher among engineering students compared with medical students. Students who used computer for 4-6 h were at significantly higher risk of developing redness (OR = 1.2, 95% CI = 1.0-3.1,P = 0.04), burning sensation (OR = 2.1,95% CI = 1.3-3.1, P < 0.01) and dry eyes (OR = 1.8, 95% CI = 1.1-2.9, P = 0.02) compared to those who used computer for less than 4 h. Significant correlation was found between increased hours of computer use and the symptoms redness, burning sensation, blurred vision and dry eyes. Conclusion: The present study revealed that more than three-fourth of the students complained of any one of the symptoms of CVS while working on the computer. PMID:24761234

Computer vision syndrome and associated factors among medical and engineering students in chennai.

PubMed

Logaraj, M; Madhupriya, V; Hegde, Sk

2014-03-01

Almost all institutions, colleges, universities and homes today were using computer regularly. Very little research has been carried out on Indian users especially among college students the effects of computer use on the eye and vision related problems. The aim of this study was to assess the prevalence of computer vision syndrome (CVS) among medical and engineering students and the factors associated with the same. A cross-sectional study was conducted among medical and engineering college students of a University situated in the suburban area of Chennai. Students who used computer in the month preceding the date of study were included in the study. The participants were surveyed using pre-tested structured questionnaire. Among engineering students, the prevalence of CVS was found to be 81.9% (176/215) while among medical students; it was found to be 78.6% (158/201). A significantly higher proportion of engineering students 40.9% (88/215) used computers for 4-6 h/day as compared to medical students 10% (20/201) (P < 0.001). The reported symptoms of CVS were higher among engineering students compared with medical students. Students who used computer for 4-6 h were at significantly higher risk of developing redness (OR = 1.2, 95% CI = 1.0-3.1,P = 0.04), burning sensation (OR = 2.1,95% CI = 1.3-3.1, P < 0.01) and dry eyes (OR = 1.8, 95% CI = 1.1-2.9, P = 0.02) compared to those who used computer for less than 4 h. Significant correlation was found between increased hours of computer use and the symptoms redness, burning sensation, blurred vision and dry eyes. The present study revealed that more than three-fourth of the students complained of any one of the symptoms of CVS while working on the computer.

A development optical course based on optical fiber white light interference

NASA Astrophysics Data System (ADS)

Jiang, Haili; Sun, Qiuhua; Zhao, Yancheng; Li, Qingbo

2017-08-01

The Michelson interferometer is a very important instrument in optical part for college physics teaching. But most students only know the instrument itself and don't know how to use it in practical engineering problems. A case about optical fiber white light interference based on engineering practice was introduced in the optical teaching of college physics and then designed a development course of university physical optics part. This system based on low-coherence white light interferometric technology can be used to measure distribution strain or temperature. It also could be used in the case of temperature compensation mode.This teaching design can use the knowledge transfer rule to enable students to apply the basic knowledge in the university physics to the new knowledge domain, which can promote the students' ability of using scientific methods to solve complex engineering problems.

Factors affecting the retention of first-year female science and engineering students at the University of Michigan

NASA Astrophysics Data System (ADS)

Ballard, Juliet Webb

Alarming to many academics is that while the numbers of female students (at the University of Michigan in particular) in SEM (Science, Engineering, and Mathematics) departments have shown increases in enrollment over the past decades, the number of female professionals in the field has decreased. The purpose of the study was to determine the environmental perceptions of female SEM students in the Women in Science and Engineering (WISE) Program at the University of Michigan. The WISE-RP (Residence Program) is an existing living and learning education program at the university that was designed to facilitate the successful retention and graduation of undergraduate female SEM students in the capacity that the admissions statistics should logically imply. The objectives of the study included identification of the perceptions of female students that contribute to, and foster retention of students participating in the WISE-RP program. The knowledge obtained from this evaluation will guide the University of Michigan in formulating specific interventions and retention approaches, both in and out of the classroom. This was achieved by identifying (among other things) commonality of experiences, and female student's perceptions of acceptance, integration and interactivity. The data used in this secondary analysis was collected over a 2 year period (1999--2001). The primary instrument used for data collection was a structured interview protocol utilizing focus groups. The population and samples studied were comprised of: a research project consisting of 36 focus groups from WISE-RP, University Research Opportunity Program, and the University Research Opportunity in Residence Programs; the sample size of the initial project was 180 first year SEM male and female students. The research project consisted of working with a senior research team at the University of Michigan to develop a structured interview instrument, pilot the instrument, and select focus groups. Content analysis was conducted on the open-ended focus group questions. Three themes emerged from the data set: (a) general contributing factors to retention, (b) support networks and programmatic features that contributed to retention, (c) individual/gender specific challenges that students faced. It found that the initial mission of the program has been accomplished, as evidenced by the findings of this study. The University is graduating and retaining female SEM students at a higher rate than at the program's inception. The challenges for the University at this point include: increasing numbers of female SEM faculty, enhancing and focusing the living learning community mission of the program, integrating student affairs components to the program features on an administrative level, committing to longitudinal analysis and assessment of individual incoming students toward identifying strengths and weaknesses, and finally---committing increased resources to these objectives.

On a New Approach to Education about Ethics for Engineers at Meijou University

NASA Astrophysics Data System (ADS)

Fukaya, Minoru; Morimoto, Tsukasa; Kimura, Noritsugu

We propose a new approach to education of so called “engineering ethics”. This approach has two important elements in its teaching system. One is “problem-solving learning”, and the other is “discussion ability”. So far, engineering ethics started at the ethical standpoint. But we put the viewpoint of problem-solving learning at the educational base of engineering ethics. Because many problems have complicated structures, so if we want to solve them, we should discuss each other. Problem-solving ability and discussion ability, they help engineers to solve the complex problems in their social everyday life. Therefore, Meijo University names engineering ethics “ethics for engineers”. At Meijou University about 1300 students take classes in both ethics for engineers and environmental ethics for one year.

Introductory Education for Mechanical Engineering by Exercise in Mechanical Disassembly

NASA Astrophysics Data System (ADS)

Matsui, Yoshio; Asakawa, Naoki; Iwamori, Satoru

An introductory program “Exercise for engineers in mechanical disassembly” is an exercise that ten students of every team disassemble a motor scooter to the components and then assemble again to the initial form in 15 weeks. The purpose of this program is to introduce mechanical engineering by touching the real machine and learning how it is composed from various mechanical parts to the students at the early period after the entrance into the university. Additional short lectures by young teachers and a special lecture by a top engineer in the industry encourage the students to combine the actual machine and the mechanical engineering subjects. Furthermore, various educations such as group leader system, hazard prediction training, parts filing are included in this program. As a result, students recognize the importance of the mechanical engineering study and the way of group working.

Engineering Gender--Gendering Engineering: What About Women in Nerd-Dom?

ERIC Educational Resources Information Center

Tonso, Karen L.

This paper examines the kinds of persons that engineering education produces, focusing on cultural identities related to gender issues. It is based on survey questionnaires, interviews, and observations of 274 first-year and fourth-year engineering students at a state university known for its concern about the education of women engineers. The…

Development and Evaluation of an Undergraduate Multidisciplinary Project Activity in Engineering and Design

ERIC Educational Resources Information Center

Smith, David R.; Cole, Joanne

2012-01-01

The School of Engineering and Design Multidisciplinary Project (MDP) at Brunel University is a one week long project based activity involving first year undergraduate students from across the School subject areas of Electronic and Computer Engineering, Mechanical Engineering, Civil Engineering and Design. This paper describes the main aims of the…

An Engineering Research Program for High School Science Teachers: Year Two Changes and Results

ERIC Educational Resources Information Center

DeJong, Brian P.; Yelamarthi, Kumar; Kaya, Tolga

2016-01-01

The research experiences for teachers program at Central Michigan University was initiated to team in-service and pre-service teachers with undergraduate engineering students and engineering faculty, in an engineering research setting. During the six-week program, teachers learn engineering concepts and develop high-school instructional material…

The Implementation of Analytical Hierarchy Process Method for Outstanding Achievement Scholarship Reception Selection at Universal University of Batam

NASA Astrophysics Data System (ADS)

Marfuah; Widiantoro, Suryo

2017-12-01

Universal University of Batam offers outstanding achievement scholarship to the current students to be each year of new academic year, seeing the large number of new Students who are interested to get it then the selection team should be able to filter and choose the eligible ones. The selection process starting with evaluation and judgement made by the experts. There were five criteria as the basic of selection and each had three alternatives that must be considered. Based on the policy of University the maximum number of recipients are five for each of six study programs. Those programs are art of music, dance, industrial engineering, environmental engineering, telecommunication engineering, and software engineering. The expert choice was subjective that AHP method was used to help in making decision consistently by doing pairwise comparison matrix process between criteria based on selected alternatives, by determining the priority order of criteria and alternatives used. The results of these calculations were used as supporting decision-making to determine the eligible students receiving scholarships based on alternatives of selected criteria determined by the final results of AHP method calculation with the priority criterion A (0.37%), C (0.23%), E (0.21%), D (0.14%) and B (0.06%), value of consistency ratio 0.05. Then the alternative priorities 1 (0.63), 2 (0.26) and 3 (0.11) the consistency ratio values 0.03, where each CR ≤ 0.1 or consistent weighting preference.

NASA's Student Launch Projects: A Government Education Program for Science and Engineering

NASA Technical Reports Server (NTRS)

Shepherd, Christena C.

2009-01-01

Among the many NASA education activities, the Student Launch projects are examples of how one agency has been working with students to inspire math, science and engineering interest. There are two Student Launch projects: Student Launch Initiative (SLI) for middle and high school students and the University Student Launch Initiative (USLI) for college students. The programs are described and website links are provided for further information. This document presents an example of how an agency can work with its unique resources in partnership with schools and communities to bring excitement to the classroom.

Just Who Are These International Students Anyway?

ERIC Educational Resources Information Center

Allameh, Joy

Foreign students enrolled in U.S. colleges and universities form a substantial proportion of the student population. The majority of these students come from Asia and most often choose to study business, management, and engineering. The number of female foreign students is rising. The foreign student population has special educational, social, and…

Mathematics: A Powerful Pre- and Post-Admission Variable to Predict Success in Engineering Programmes at a University of Technology

ERIC Educational Resources Information Center

van Wyk, Barend; Hofman, Wiecher; Louw, Cecilia

2013-01-01

Although student attrition and retention are researched all over the world, there is no final formula available to ensure academic success for selected students. The purpose is to share research undertaken at the Tshwane University of Technology (TUT) in order to investigate the role of mathematics in student achievement and retention in National…

College Readiness: The Evaluation of Students Participating in the Historically Black College and University Program in Pre-Calculus and the Calculus Sequence

ERIC Educational Resources Information Center

Hall, Angela Renee

2011-01-01

This investigative research focuses on the level of readiness of Science, Technology, Engineering, and Mathematics (STEM) students entering Historically Black Colleges and Universities (HBCU) in the college Calculus sequence. Calculus is a fundamental course for STEM courses. The level of readiness of the students for Calculus can very well play a…

Educating Tomorrow's Aerrospace Engineers by Developing and Launching Liquid-Propelled Rockets

NASA Astrophysics Data System (ADS)

Besnard, Eric; Garvey, John; Holleman, Tom; Mueller, Tom

2002-01-01

conducted at California State University, Long Beach (CSULB), in which engineering students develop and launch liquid propelled rockets. The program is articulated around two main activities, each with specific objectives. The first component of CALVEIN is a systems integration laboratory where students develop/improve vehicle subsystems and integrate them into a vehicle (Prospector-2 - P-2 - for the 2001-02 academic year - AY). This component has three main objectives: (1) Develop hands- on skills for incoming students and expose them to aerospace hardware; (2) allow for upper division students who have been involved in the program to mentor incoming students and manage small teams; and (3) provide students from various disciplines within the College of Engineering - and other universities - with the chance to develop/improve subsystems on the vehicle. Among recent student projects conducted as part of this component are: a new 1000 lbf thrust engine using pintle injector technology, which was successfully tested on Dec. 1, 2001 and flown on Prospector-2 in Feb. 2002 (developed by CSULB Mechanical and Aerospace Engineering students); a digital flight telemetry package (developed by CSULB Electrical Engineering students); a new recovery system where a mechanical system replaces pyrotechnics for parachute release (developed by CSULB Mechanical and Aerospace Engineering students); and a 1-ft payload bay to accommodate experimental payloads (e.g. "CANSATS" developed by Stanford University students). The second component of CALVEIN is a formal Aerospace System Design curriculum. In the first-semester, from top-level system requirements, the students perform functional analysis, define the various subsystems and derive their requirements. These are presented at the Systems Functional and Requirement Reviews (SFR &SRR). The methods used for validation and verification are determined. Specifications and Interface Control Documents (ICD) are generated by the student team(s). Trade studies are identified and conducted, leading to a Preliminary Design Review (PDR) at the end of the first semester. A detailed design follows, culminating in a Critical Design Review (CDR), etc. A general process suitable for a two-semester course sequence will be outlined. The project is conducted in an Integrated Product Team (IPT) environment, which includes a project manager, a systems engineer, and the various disciplines needed for the project (propulsion, aerodynamics, structures and materials, mass, CAD, thermal, fluids, etc.). Each student works with a Faculty member or industry advisor who is a specialist in his/her area. This design curriculum enhances the education of the graduates and provides future employers with engineers cognizant of and experienced in the application of Systems Engineering to a full-scale project over the entire product development cycle. For the AY01-02, the curriculum is being applied to the development of a gimbaled aerospike engine and its integration into P-3, scheduled to fly in May 2002. The paper ends with a summary of "lessons learned" from this experience. Budget issues are also addressed to demonstrate the ability to replicate such projects at other institutions with minimal costs, provided that it can be taken advantages of possible synergies between existing programs, in-house resources, and cooperation with other institutions or organizations.

The Syracuse University Center for Training and Research in Hypersonics

NASA Technical Reports Server (NTRS)

LaGraff, John; Blankson, Isaiah (Technical Monitor); Robinson, Stephen K. (Technical Monitor); Walsh, Michael J. (Technical Monitor); Anderson, Griffin Y. (Technical Monitor)

2000-01-01

In Fall 1993, NASA Headquarters established Centers for Hypersonics at the University of Maryland, the University of Texas-Arlington, and Syracuse University. These centers are dedicated to research and education in hypersonic technologies and have the objective of educating the next generation of engineers in this critical field. At the Syracuse University Center for Hypersonics this goal is being realized by focusing resources to: Provide an environment in which promising undergraduate students can learn the fundamental engineering principles of hypersonics so that they may make a seamless transition to graduate study and research in this field; Provide graduate students with advanced training in hypersonics and an opportunity to interact with leading authorities in the field in both research and instructional capacities; and Perform fundamental research in areas that will impact hypersonic vehicle design and development.

Activities Related to Systems Engineering

DTIC Science & Technology

2004-12-01

competencies include weapons technology including WMD; information management; modeling and simulation; operations analysis; chemical and explosive sciences...thesis students) are drawn from engineering, es • Th s on: s 19. University of Idaho at Idaho Falls Loc o daho ems Engineering; Certificate in n

Engineering Ethics : The Second Report on Student Awareness and Course Methodology

NASA Astrophysics Data System (ADS)

Abe, Takao; Hachimori, Akira; Honywood, Michael

This paper is the second one detailing the findings of a questionnaire survey administered to gauge respondents' awareness of engineering ethics. The survey was carried out with the cooperation of Japanese, South Korean, and Chinese universities as well as a number of Japanese corporations. Our findings indicate that while students and company employees alike generally exhibit an appetite for learning about engineering ethics, South Korean and Chinese students have adopted a posture that is more conducive to such study than their Japanese counterparts. We also discovered a number of other differences rooted in students' nationality. Engineering ethics content seems to receive little attention in corporate training programs. Small and medium size companies in particular may not be addressing questions of engineering ethics in an aggressive manner.

The Relationship of the Supportiveness of the Academic Environment to the Self-Confidence and Assertiveness in Academic Work for Men and Women Graduate Students in Science and Engineering.

ERIC Educational Resources Information Center

Stansbury, Kendyll

Situational influences on self-confidence and assertiveness in female and male graduate students in science and engineering were studied, based on responses from 328 Stanford University students (155 males and 173 females). Two dependent variables were used: an index of items measuring an individual's self-confidence in the ability to perform…

`Human nature': Chemical engineering students' ideas about human relationships with the natural world

NASA Astrophysics Data System (ADS)

Goldman, Daphne; Ben-Zvi Assaraf, Orit; Shemesh, Julia

2014-05-01

While importance of environmental ethics, as a component of sustainable development, in preparing engineers is widely acknowledged, little research has addressed chemical engineers' environmental concerns. This study aimed to address this void by exploring chemical engineering students' values regarding human-nature relationships. The study was conducted with 247 3rd-4th year chemical engineering students in Israeli Universities. It employed the New Ecological Paradigm (NEP)-questionnaire to which students added written explanations. Quantitative analysis of NEP-scale results shows that the students demonstrated moderately ecocentric orientation. Explanations to the NEP-items reveal diverse, ambivalent ideas regarding the notions embodied in the NEP, strong scientific orientation and reliance on technology for addressing environmental challenges. Endorsing sustainability implies that today's engineers be equipped with an ecological perspective. The capacity of Higher Education to enable engineers to develop dispositions about human-nature interrelationships requires adaptation of curricula towards multidisciplinary, integrative learning addressing social-political-economic-ethical perspectives, and implementing critical-thinking within the socio-scientific issues pedagogical approach.

NASA Propulsion Engineering Research Center, volume 1

NASA Technical Reports Server (NTRS)

1993-01-01

Over the past year, the Propulsion Engineering Research Center at The Pennsylvania State University continued its progress toward meeting the goals of NASA's University Space Engineering Research Centers (USERC) program. The USERC program was initiated in 1988 by the Office of Aeronautics and Space Technology to provide an invigorating force to drive technology advancements in the U.S. space industry. The Propulsion Center's role in this effort is to provide a fundamental basis from which the technology advances in propulsion can be derived. To fulfill this role, an integrated program was developed that focuses research efforts on key technical areas, provides students with a broad education in traditional propulsion-related science and engineering disciplines, and provides minority and other under-represented students with opportunities to take their first step toward professional careers in propulsion engineering. The program is made efficient by incorporating government propulsion laboratories and the U.S. propulsion industry into the program through extensive interactions and research involvement. The Center is comprised of faculty, professional staff, and graduate and undergraduate students working on a broad spectrum of research issues related to propulsion. The Center's research focus encompasses both current and advanced propulsion concepts for space transportation, with a research emphasis on liquid propellant rocket engines. The liquid rocket engine research includes programs in combustion and turbomachinery. Other space transportation modes that are being addressed include anti-matter, electric, nuclear, and solid propellant propulsion. Outside funding supports a significant fraction of Center research, with the major portion of the basic USERC grant being used for graduate student support and recruitment. The remainder of the USERC funds are used to support programs to increase minority student enrollment in engineering, to maintain Center infrastructure, and to develop research capability in key new areas. Significant research programs in propulsion systems for air and land transportation complement the space propulsion focus. The primary mission of the Center is student education. The student program emphasizes formal class work and research in classical engineering and science disciplines with applications to propulsion.

A Reanalysis of Engineering Majors' Self-Efficacy Beliefs

ERIC Educational Resources Information Center

Concannon, James P.; Barrow, Lloyd H.

2012-01-01

This study examines differences in women's engineering self-efficacy beliefs across grade levels in comparison to men's engineering self-efficacy (ESE) beliefs across grade levels. Data for this study was collected from 746 (635 men, 111 women) engineering students enrolled in a large research extensive university. Four major conclusions resulted…

The Significance of Including an Entrepreneurship Course in Engineering Programs

ERIC Educational Resources Information Center

Mosly, Ibrahim

2017-01-01

This paper studied the significance of entrepreneurship education in engineering programs. It looked into its influence on engineering students' perception and willingness to change their future job direction. The study was performed at the College of Engineering-Rabigh Branch, of King Abdulaiziz University in Saudi Arabia. Entrepreneurship…

Experimental Evaluation of the New Automated Team Composition System (ATCS) by Formation of Optimal Teams for an Engineering Research Task

DTIC Science & Technology

2010-12-24

Los Angeles Police Department ) 3. LACSD ( Los Angeles County Sheriff’ Department ) 4. USDHS (US Department of Homeland Security) Candidate Roster... The present study used archival data from a UCLA (University of California Los Angeles ) engineering course in which nominally student teams prepare...psychological literature. The present study used archival data from a UCLA (University of California Los Angeles ) engineering course

Final report to DOE: Matching Grant Program for the Penn State University Nuclear Engineering Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jack S. Brenizer, Jr.

2003-01-17

The DOE/Industry Matching Grant Program is designed to encourage collaborative support for nuclear engineering education as well as research between the nation's nuclear industry and the U.S. Department of Energy (DOE). Despite a serious decline in student enrollments in the 1980s and 1990s, the discipline of nuclear engineering remained important to the advancement of the mission goals of DOE. The program is designed to ensure that academic programs in nuclear engineering are maintained and enhanced in universities throughout the U.S. At Penn State, the Matching Grant Program played a critical role in the survival of the Nuclear Engineering degree programs.more » Funds were used in a variety of ways to support both undergraduate and graduate students directly. Some of these included providing seed funding for new graduate research initiatives, funding the development of new course materials, supporting new teaching facilities, maintenance and purchase of teaching laboratory equipment, and providing undergraduate scholarships, graduate fellowships, and wage payroll positions for students.« less

A community-based, interdisciplinary rehabilitation engineering course.

PubMed

Lundy, Mary; Aceros, Juan

2016-08-01

A novel, community-based course was created through collaboration between the School of Engineering and the Physical Therapy program at the University of North Florida. This course offers a hands-on, interdisciplinary training experience for undergraduate engineering students through team-based design projects where engineering students are partnered with physical therapy students. Students learn the process of design, fabrication and testing of low-tech and high-tech rehabilitation technology for children with disabilities, and are exposed to a clinical experience under the guidance of licensed therapists. This course was taught in two consecutive years and pre-test/post-test data evaluating the impact of this interprofessional education experience on the students is presented using the Public Service Motivation Scale, Civic Actions Scale, Civic Attitudes Scale, and the Interprofessional Socialization and Valuing Scale.

Current status of nuclear engineering education

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palladino, N.J.

1975-09-01

The 65 colleges and universities offering undergraduate degrees in nuclear engineering and the 15 schools offering strong nuclear engineering options are, in general, doing a good job to meet the current spectrum of job opportunities. But, nuclear engineering programs are not producing enough graduates to meet growing demands. They currently receive little aid and support from their customers --industry and government--in the form of scholarships, grants, faculty research support, student thesis and project support, or student summer jobs. There is not enough interaction between industry and universities. Most nuclear engineering programs are geared too closely to the technology of themore » present family of reactors and too little to the future breeder reactors and controlled thermonuclear reactors. In addition, nuclear engineering programs attract too few women and members of minority ethnic groups. Further study of the reasons for this fact is needed so that effective corrective action can be taken. Faculty in nuclear engineering programs should assume greater initiative to provide attractive and objective nuclear energy electives for technical and nontechnical students in other disciplines to improve their technical understanding of the safety and environmental issues involved. More aggressive and persistent efforts must be made by nuclear engineering schools to obtain industry support and involvement in their programs. (auth)« less

Among friends: the role of academic-preparedness diversity in individual performance within a small-group STEM learning environment

NASA Astrophysics Data System (ADS)

Micari, Marina; Van Winkle, Zachary; Pazos, Pilar

2016-08-01

In this study, we investigate the relationship between academic-preparedness diversity within small learning groups and individual academic performance in science, technology, engineering, and mathematics (STEM) university courses. We further examine whether academic-preparedness diversity impacts academically more- and less-prepared students differently. We use data from 5367 university students nested within 1141 science, engineering, and mathematics learning groups and use a regression analysis to estimate the effect of group diversity, measured in two ways, on course performance. Our results indicate that academic-preparedness diversity is generally associated with positive learning outcomes, that academically less-prepared students derive greater benefit, and that less-prepared students fare best when they are not alone in a group of highly prepared students. Implications for teaching and small-group facilitation are addressed.

Present Status of Geophysics Departments at Universities in Turkey from Perspectives of their Students

NASA Astrophysics Data System (ADS)

Karabulut, Savas; Baris Aygordu, Ozan; Benli, Aral

2015-04-01

This survey was conducted in order to make the students who are having geophysical engineering education in Turkey evaluate their departments from their own perspectives.By doing this we aimed to make a contribution to the geophysical engineering education and we tried to find out if there were any deficiencies in that matter and also the possible solutions.In this respect aproximately 500 undergraduates from 11 different state universities were asked 25 questions regarding both their socio-economic status and their ideas on their future professions.In the survey the students were asked to state their high-school graduation;whether it is an Anatolian High-school,Vocational high-school or college and if geophysical engineering education was their first choice at the university entrance exams.The students' foreign language status-if there were any- except their mother tongue were asked and also their opinions on geophysical education at their universities.Besides these the students were asked in which fields they study in their department; Seismology, Geophysics or Applied Geophysics and if they found the geophysical equipments adequate in their departments and also the programming languages-like data processing laboratories.In the survey we tried to find out if the students were encouraged to participate in the meetings and congresses in their field by their instructers and if they found the theoretical training adequate besides the practical one.Above all the students answered questions if they had any worries about future job opportunities ; what their goals were after they graduate and if they could easily get access to any kind of Turkish sources in their field and if they were reluctant to work at any jobs part-time or full-time during university.The results of the survey were presented to the Union of Turkish Engineers and Architects and also to the related heads of departments.The most striking parts of this survey were that the students were not edequate enough to interpret and analyse the foreign articles and journeys because of their poor foreign language levels and % 80,5 were very anxious to get a proper job in the future and %78,6 did not find the sources edequate in Turkish and %91,8 of these students thought that theoratical training was not enough besides practical one.

Engineering Discourse in the Structure of the ESP Training at Southern Federal University

ERIC Educational Resources Information Center

Sidelnik, Ellina; Melnik, Olga; Burenko, Lyudmila

2016-01-01

This paper discusses the essentials of engineering discourse in the structure of the ESP training at Southern Federal University (SFU) (Taganrog, Russia). The purpose of this paper is to justify critical rethinking of existing programs of technical students training in foreign languages at SFU taking into account the increasing role of engineering…

Technical Writing: Library Resources for Engineers. A Self-Paced Workbook for the University of Arkansas Libraries. Revised.

ERIC Educational Resources Information Center

Dew, Stephen H.

This self-paced library workbook is a course requirement of all "technical writing" freshman English classes at the University of Arkansas. The technical writing course is required of all engineering students, and its major focus is on writing a term paper containing a bibliography produced through library research. The workbook…

A Report on the Videotape-Electrowriter Remote Mode Program in Engineering of the University of Tennessee.

ERIC Educational Resources Information Center

Bohringer, Kenneth C.

The use of Videotape-Electrowriter Remote Mode (VERM) to deliver advanced level engineering graduate courses to student not on the University of Tennessee campus is described. Begun initially as an experimental project in 1969 using videotape equipment to record blackboard presentations, classes are now sent to other campuses and to industries…

Assessment by Employers of Newly Graduated Civil Engineers from the Islamic University of Gaza

ERIC Educational Resources Information Center

Enshassi, Adnan; Hassouna, Ahmed

2005-01-01

The evaluation process is very important to identify and recognize the strengths and the weaknesses of graduated students. The purpose of this paper is to evaluate the performance of the newly graduated civil engineers from the Islamic University of Gaza in Palestine. The methodology was based on questionnaires and informal interview. The…

Mitigating the Mathematical Knowledge Gap between High School and First Year University Chemical Engineering Mathematics Course

ERIC Educational Resources Information Center

Basitere, Moses; Ivala, Eunice

2015-01-01

This paper reports on a study carried out at a University of Technology, South Africa, aimed at identifying the existence of the mathematical knowledge gap and evaluating the intervention designed to bridge the knowledge gap amongst students studying first year mathematics at the Chemical Engineering Extended Curriculum Program (ECP). In this…

Motivational Project-Based Laboratory for a Common First Year Electrical Engineering Course

ERIC Educational Resources Information Center

Nedic, Zorica; Nafalski, Andrew; Machotka, Jan

2010-01-01

Over the past few years many universities worldwide have introduced a common first year for all engineering disciplines. This is despite the opinion of many academics that large classes have negative effects on the learning outcomes of first year students. The University of South Australia is also faced with low motivation amongst engineering…

The predicament of aeronautical engineering education and what we can do about it

NASA Technical Reports Server (NTRS)

Bollard, R. J. H.

1975-01-01

Problems faced by the universities due to the drop in enrollment of aeronautics and astronautics undergraduate students are examined. Efforts made by the universities to overcome some of these problems are discussed. The author presents ten specific recommendations involving government and industry support to overcome the apparent lack of interest in engineering disciplines.

From Human Activity to Conceptual Understanding of the Chain Rule

ERIC Educational Resources Information Center

Jojo, Zingiswa Mybert Monica; Maharaj, Aneshkumar; Brijlall, Deonarain

2013-01-01

This article reports on a study which investigated first year university engineering students' construction of the definition of the concept of the chain rule in differential calculus at a University of Technology in South Africa. An APOS (Action-Process-Objects-Schema) approach was used to explore conceptual understanding displayed by students in…

Operation STEM: Increasing Success and Improving Retention among Mathematically Underprepared Students in STEM

ERIC Educational Resources Information Center

Carver, Susan D.; Van Sickle, Jenna; Holcomb, John P.; Jackson, Debbie K.; Resnick, Andrew H.; Duffy, Stephen F.; Sridhar, Nigamanth; Marquard, Antoinette M.; Quinn, Candice M.

2017-01-01

In 2012, Cleveland State University implemented a comprehensive program, called Operation STEM (OpSTEM), funded by two National Science Foundation grants, federal work study, and Cleveland State University. Its goal is to increase retention and graduation rates among Science, Technology, Engineering, and Mathematics (STEM) students by helping them…

Building a STEM Pathway: Xavier University of Louisiana's Summer Science Academy

ERIC Educational Resources Information Center

Haynes, Mariana

2015-01-01

This report examines how Xavier University of Louisiana's summer bridge program for middle and high school students prepares students of color to succeed in science, technology, engineering, and mathematics (STEM) fields. This extensive report--interspersed with video highlights of the program--provides a lens into the kind of academic and social…

Change Institutional Culture, and You Change Who Goes into Science

ERIC Educational Resources Information Center

Habrowski, Freeman A., III; Maton, Kenneth I.

2009-01-01

In the late 1980s, the University of Maryland Baltimore County launched a major initiative to find out why more students were not succeeding in science, technology, engineering, and mathematics--known collectively as the STEM disciplines--despite the university's long-standing commitment to those fields. A review of student data revealed that the…

A Novel Approach for Engaging Academia in Collaborative Projects with NASA through the X-Hab Academic Innovation Challenge

NASA Technical Reports Server (NTRS)

Gill, Tracy R.; Gattuso, Kelly

2015-01-01

The X-Hab Academic Innovation Challenge, currently in its sixth year of execution, provides university students with the opportunity to be on the forefront of innovation. The X-Hab Challenge, for short, is designed to engage and retain students in Science, Technology, Engineering and Math (STEM). NASA identifies necessary technologies and studies for deep space missions and invites universities from around the country to develop concepts, prototypes, and lessons learned that will help shape future space missions and awards seed funds to design and produce functional products of interest as proposed by university teams according to their interests and expertise. Universities propose on a variety of projects suggested by NASA and are then judged on technical merit, academic integration, leveraged funding, and outreach. The universities assemble a multi-discipline team of students and advisors that invest months working together, developing concepts, and frequently producing working prototypes. Not only are students able to gain quality experience, working real world problems that have the possibility to be implemented, but they work closely with subject matter experts from NASA who guide them through an official engineering development process.

A Novel Approach for Engaging Academia in Collaborative Projects with NASA through the X-Hab Academic Innovation Challenge

NASA Technical Reports Server (NTRS)

Gill, Tracy R.; Gattuso, Kelly J.

2015-01-01

The X-Hab Academic Innovation Challenge, currently in its sixth year of execution, provides university students with the opportunity to be on the forefront of innovation. The X-Hab Challenge, for short, is designed to engage and retain students in Science, Technology, Engineering and Math (STEM). NASA identifies necessary technologies and studies for deep space missions and invites universities from around the country to develop concepts, prototypes, and lessons learned that will help shape future space missions and awards seed funds to design and produce functional products of interest as proposed by university teams according to their interests and expertise. Universities propose on a variety of projects suggested by NASA and are then judged on technical merit, academic integration, leveraged funding, and outreach. The universities assemble a multi-discipline team of students and advisors that invest months working together, developing concepts, and frequently producing working prototypes. Not only are students able to gain quality experience, working real world problems that have the possibility of be implemented, but they work closely with subject matter experts from NASA who guide them through an official engineering development process.

[Family and psychosocial variables in the choice of university studies].

PubMed

González-Pinto Arrillaga, A; Yllá Segura, L; Ortiz Jáuregi, A; Zupiria Gorostidi, X

2003-01-01

Family order of the children and family size as well as other psychosocial variables on University of the Basque Country (UBC) students are compared in order to relate these data with the choice of type of university studies. As a sample, we studied 6,013 students from the UBC in different careers and courses. Mean age was 20.26 years. The following instruments were used: a sociodemographic questionnaire, the Eysenck Personality Scale and Yllá Alexithymia Scale. All them were validated for our country. The presence of women was greater in all the career studies except for engineering where the proportion of men was greater. The data verify the relationship between being the youngest or intermediate child of a family of three or more children and studying Journalism and Fine Arts and that the first born of families of two or more children are more represented in Engineering. It is interesting that there are fewer only children in Medicine where children of families of three or more, both first-born as well as intermediate, go. These variables, as well as extraversion, neuroticism and alexithymia, were different in the different career studies. It was also observed that the female university students scored higher in the neuroticism scale and that the levels of Alexithymia were higher among the men. Further, relations were found between child birth order and family size and personality, in the sense that the Medical and Odontology careers presented lower scores in Alexithymia while the more technical careers such as Engineering are those that present a higher alexithymia. Medicine and Odontology, followed by Mathematics and Journalism, obtained the highest scores in neuroticism. Engineering students obtain the lowest neuroticism. The most extroverted students are those from Journalism, Chemistry, Economics and Odontology. The choice of university studies is associated to gender, birth order, family size and personality patterns. Personality variables are related to gender, birth order and family size.

Support for International Space University?s (ISU) 2003 Summer Session Program and the Theme Day on ?Living and Working in Space?

NASA Technical Reports Server (NTRS)

Finarelli, Margaret G.

2004-01-01

The 2003 Summer Session Program of the International Space University (ISU) was conducted at the ISU Central Campus in Strasbourg, France, July 5-September 6, 2003. Attending the Summer Session were 114 students from 27 countries including the US. The International Space University (ISU) offers its students a unique and comprehensive educational package covering all disciplines related to space programs and enterprises - space science, space engineering, systems engineering, space policy and law, business and management, and space and society. By providing international graduate students and young space professionals both an intensive interdisciplinary curriculum and also the opportunity to solve complex problems together in an intercultural environment, ISU is preparing the future leaders of the emerging global space community. Since its founding in 1988, ISU has graduated more than 2200 students from 87 countries. Together with hundreds of ISU faculty and lecturers from around the world, ISU alumni comprise an extremely effective network of space professionals and leaders that actively facilitates individual career growth, professional activities and international space cooperation. ISU's interdisciplinary Student Theme Days and Student Workshops are intended to have great educational value for the participants. Along with the interdisciplinary Core Lectures, they apprise the students of state-of-the-art activities, programs and policies in spacefaring nations. They also provide ISU students the opportunity to meet world experts in space-related subjects.

Scientific and educational center "space systems and technology"

NASA Astrophysics Data System (ADS)

Kovalev, I. V.; Loginov, Y. Y.; Zelenkov, P. V.

2015-10-01

The issues of engineers training in the aerospace university on the base of Scientific and Educational Center "Space Systems and Technology" are discussed. In order to improve the quality of education in the Siberian State Aerospace University the research work of students, as well as the practice- oriented training of engineers are introduced in the educational process. It was made possible as a result of joint efforts of university with research institutes of the Russian Academy of Science and industrial enterprises. The university experience in this area promotes the development of a new methods and forms of educational activities, including the project-oriented learning technologies, identifying promising areas of specialization and training of highly skilled engineers for aerospace industry and other institutions. It also allows you to coordinate the work of departments and other units of the university to provide the educational process in workshops and departments of the industrial enterprises in accordance with the needs of the target training. Within the framework of scientific and education center the students perform researches, diploma works and master's theses; the postgraduates are trained in advanced scientific and technical areas of enterprise development.

Using interactive online role-playing simulations to develop global competency and to prepare engineering students for a globalised world

NASA Astrophysics Data System (ADS)

May, Dominik; Wold, Kari; Moore, Stephanie

2015-09-01

The world is changing significantly, and it is becoming increasingly globalised. This means that countries, businesses, and professionals must think and act globally to be successful. Many individuals, however, are not prepared with the global competency skills needed to communicate and perform effectively in a globalised system. To address this need, higher education institutions are looking for ways to instil these skills in their students. This paper explains one promising approach using current learning principles: transnational interactive online environments in engineering education. In 2011, the TU Dortmund and the University of Virginia initiated a collaboration in which engineering students from both universities took part in one online synchronous course and worked together on global topics. This paper describes how the course was designed and discusses specific research results regarding how interactive online role-playing simulations support students in gaining the global competency skills required to actively participate in today's international workforce.

A Triangulated Study of Academic Language Needs of Iranian Students of Computer Engineering: Are the Courses on Track?

ERIC Educational Resources Information Center

Atai, Mahmood Reza; Shoja, Leila

2011-01-01

Even though English for Specific Academic Purposes (ESAP) courses constitute a significant part of the Iranian university curriculum, curriculum developers have generally developed the programs based on intuition. This study assessed the present and target situation academic language needs of undergraduate students of computer engineering. To this…

Cause-Effect Analysis: Improvement of a First Year Engineering Students' Calculus Teaching Model

ERIC Educational Resources Information Center

van der Hoff, Quay; Harding, Ansie

2017-01-01

This study focuses on the mathematics department at a South African university and in particular on teaching of calculus to first year engineering students. The paper reports on a cause-effect analysis, often used for business improvement. The cause-effect analysis indicates that there are many factors that impact on secondary school teaching of…

Long-Term Impact of Improving Visualization Abilities of Minority Engineering and Technology Students: Preliminary Results

ERIC Educational Resources Information Center

Study, Nancy E.

2011-01-01

Previous studies found that students enrolled in introductory engineering graphics courses at a historically black university (HBCU) had significantly lower than average test scores on the Purdue Spatial Visualization Test: Visualization of Rotations (PSVT) when it was administered during the first week of class. Since the ability to visualize is…

Integrating the Development of Continuous Improvement and Innovation Capabilities into Engineering Education

ERIC Educational Resources Information Center

Jorgensen, Frances; Kofoed, Lise Busk

2007-01-01

In this paper, a study is presented in which engineering students at a Danish university developed Continuous Improvement (CI) and innovation capabilities through action research and experiential learning methods. The paper begins with a brief overview of the literature on CI and innovation, followed by an account of how the students designed and…

The Public Good and Academic Capitalism: Science and Engineering Doctoral Students and Faculty on the Boundary of Knowledge Regimes

ERIC Educational Resources Information Center

Szelényi, Katalin; Bresonis, Kate

2014-01-01

This article examines the research-related experiences of 48 doctoral students and 22 faculty in science and engineering fields at three research universities, with specific emphasis on the intersection of the public good and academic capitalism. Identifying an expansive, intersecting organizational space between the public good and academic…

A Longitudinal Evaluation of a Project-Based Learning Initiative in an Engineering Undergraduate Programme

ERIC Educational Resources Information Center

Hall, Wayne; Palmer, Stuart; Bennett, Mitchell

2012-01-01

Project-based learning (PBL) is a well-known student-centred methodology for engineering design education. The methodology claims to offer a number of educational benefits. This paper evaluates the student perceptions of the initial and second offering of a first-year design unit at Griffith University in Australia. It builds on an earlier…

Developing Design and Management Skills for Senior Industrial Engineering Students

ERIC Educational Resources Information Center

Urbanic, R. J.

2011-01-01

In Canadian engineering institutions, a significant design experience must occur in the final year of study. In the Department of Industrial and Manufacturing Systems at the University of Windsor, unsolved, open ended projects sponsored by industrial partners from a variety of sectors are provided to the student teams in order for them to apply…

Responses to Different Types of Inquiry Prompts: College Students' Discourse, Performance, and Perceptions of Group Work in an Engineering Class

ERIC Educational Resources Information Center

Balgopal, Meena M.; Casper, Anne Marie A.; Atadero, Rebecca A.; Rambo-Hernandez, Karen E.

2017-01-01

Working in small groups to solve problems is an instructional strategy that allows university students in science, technology, engineering, and mathematics disciplines the opportunity to practice interpersonal and professional skills while gaining and applying discipline-specific content knowledge. Previous research indicates that not all group…

Micro- and Macroscale Ideas of Current among Upper-Division Electrical Engineering Students

ERIC Educational Resources Information Center

Adam, Gina C.; Harlow, Danielle B.; Lord, Susan M.; Kautz, Christian H.

2017-01-01

The concept of electric current is fundamental in the study of electrical engineering (EE). Students are often exposed to this concept in their daily lives and early in middle school education. Lower-division university courses are usually limited to the study of passive electronic devices and simple electric circuits. Semiconductor physics is an…

Solving Nonlinear Differential Equations in the Engineering Curriculum

ERIC Educational Resources Information Center

Auslander, David M.

1977-01-01

Described is the Dynamic System Simulation Language (SIM) mini-computer system utilized at the University of California, Los Angeles. It is used by engineering students for solving nonlinear differential equations. (SL)

University of Illinois at Urbana-Champaign, Materials Research Laboratory progress report for FY 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-07-01

This interdisciplinary laboratory in the College of Engineering support research in areas of condensed matter physics, solid state chemistry, and materials science. These research programs are developed with the assistance of faculty, students, and research associates in the departments of Physics, Materials Science and Engineering, chemistry, Chemical Engineering, Electrical Engineering, Mechanical Engineering, and Nuclear Engineering.

Understanding him in STEM: Sharing the stories of African American male scholars in engineering academic programs at a predominantly White university

NASA Astrophysics Data System (ADS)

Hayes, Robert E., III

Globalization of the world economy has confirmed the need for citizens to exemplify competitive capacities in science, technology, engineering, and mathematics fields. Since the 1970s, American higher education has seen increasing numbers of students entering college but has witnessed a decline in the number of students enrolling in STEM programs. African American men fall behind other students in regards to academic performance, persistence, and success throughout primary, secondary, and tertiary schooling. Accordingly, participation of African American men in STEM disciplines is low in comparison to White males and other race groups. Various factors have been identified as contributing to the academic failures of Black men. Poor academic and social preparedness, racial identity issues, institutional climates, negative stereotypes, and fear of success have been cited as potential contributors to the relative invisibility of African American men in STEM disciplines. This study explores the life stories of five African American male scholars in the college of engineering at a predominantly white university. The goal of the qualitative investigation is to help university faculty and administrators understand the institutional, interpersonal, and collective mechanisms influencing the success identities of African American male undergraduates in STEM academic programs. Understanding the lived experiences of this population may help universities innovate stronger supports for men of color in college and broaden the borders for all students interested in STEM careers.

A Cross-Sectional Study of Engineering Students' Self-Efficacy by Gender, Ethnicity, Year, and Transfer Status

ERIC Educational Resources Information Center

Concannon, James P.; Barrow, Lloyd H.

2009-01-01

This is a cross-sectional study of 519 undergraduate engineering majors' self-efficacy beliefs at a large, research extensive, Midwestern university. Engineering self-efficacy is an individual's belief in his or her ability to successfully negotiate the academic hurdles of the engineering program. Engineering self-efficacy was obtained from four…

Enhancing Engineering Computer-Aided Design Education Using Lectures Recorded on the PC

ERIC Educational Resources Information Center

McGrann, Roy T. R.

2006-01-01

Computer-Aided Engineering (CAE) is a course that is required during the third year in the mechanical engineering curriculum at Binghamton University. The primary objective of the course is to educate students in the procedures of computer-aided engineering design. The solid modeling and analysis program Pro/Engineer[TM] (PTC[R]) is used as the…

KSC-2011-7393

NASA Image and Video Library

2011-10-14

CAPE CANAVERAL, Fla. – Mechanical engineering students from Louisiana State University joined engineers and scientists at Launch Pad 39B at NASA's Kennedy Space Center in Florida as the students toured the facility to have a look at the flame trench. Designers are looking for new, flame and vibration-resistant materials to line the trench. To help in the search, a team of mechanical engineering students at Louisiana State University are to build a scaled-down version of the flame trench that Kennedy's scientists can use to try out sample materials for the trench. If the samples work in the lab, they can be tried out in the real flame trenches at Launch Pad 39A and 39B. The launch pad has been refurbished extensively and work is continuing to modify the pad to support a variety of launch vehicles in the future. Photo credit: NASA/Jim Grossmann

KSC-2011-7394

NASA Image and Video Library

2011-10-14

CAPE CANAVERAL, Fla. – Mechanical engineering students from Louisiana State University joined engineers and scientists at Launch Pad 39B at NASA's Kennedy Space Center in Florida as the students toured the facility to have a look at the flame trench. Designers are looking for new, flame and vibration-resistant materials to line the trench. To help in the search, a team of mechanical engineering students at Louisiana State University are to build a scaled-down version of the flame trench that Kennedy's scientists can use to try out sample materials for the trench. If the samples work in the lab, they can be tried out in the real flame trenches at Launch Pad 39A and 39B. The launch pad has been refurbished extensively and work is continuing to modify the pad to support a variety of launch vehicles in the future. Photo credit: NASA/Jim Grossmann

KSC-2011-7395

NASA Image and Video Library

2011-10-14

CAPE CANAVERAL, Fla. – Mechanical engineering students from Louisiana State University, the group on the left, joined engineers and scientists at Launch Pad 39B at NASA's Kennedy Space Center in Florida as the students toured the facility to have a look at the flame trench. Designers are looking for new, flame and vibration-resistant materials to line the trench. To help in the search, a team of mechanical engineering students at Louisiana State University are to build a scaled-down version of the flame trench that Kennedy's scientists can use to try out sample materials for the trench. If the samples work in the lab, they can be tried out in the real flame trenches at Launch Pad 39A and 39B. The launch pad has been refurbished extensively and work is continuing to modify the pad to support a variety of launch vehicles in the future. Photo credit: NASA/Jim Grossmann

Testing foreign language impact on engineering students' scientific problem-solving performance

NASA Astrophysics Data System (ADS)

Tatzl, Dietmar; Messnarz, Bernd

2013-12-01

This article investigates the influence of English as the examination language on the solution of physics and science problems by non-native speakers in tertiary engineering education. For that purpose, a statistically significant total number of 96 students in four year groups from freshman to senior level participated in a testing experiment in the Degree Programme of Aviation at the FH JOANNEUM University of Applied Sciences, Graz, Austria. Half of each test group were given a set of 12 physics problems described in German, the other half received the same set of problems described in English. It was the goal to test linguistic reading comprehension necessary for scientific problem solving instead of physics knowledge as such. The results imply that written undergraduate English-medium engineering tests and examinations may not require additional examination time or language-specific aids for students who have reached university-entrance proficiency in English as a foreign language.

Estimate of Students' Workload and the Impact of the Evaluation System on Students' Dedication to Studying a Subject in First-Year Engineering Courses

ERIC Educational Resources Information Center

Garmendia, Mikel; Guisasola, Jenaro; Barragues, J. I.; Zuza, Kristina

2008-01-01

In order to adapt current subjects to the ECTS credits system, it is necessary to estimate how much time a student has to invest in learning a subject. The Polytechnic Engineering School of the University of the Basque Country has made an initial study to investigate this matter in several subjects. A weekly questionnaire design was used for all…

Career Services | College of Engineering & Applied Science

Science.gov Websites

Engineering & Applied Science uses the university's PantherJobs to help students post resumes, search and ' resumes, post available positions and schedule interviews. Co-ops and Internships Co-ops and Internships

Communication skills to develop trusting relationships on global virtual engineering capstone teams

NASA Astrophysics Data System (ADS)

Zaugg, Holt; Davies, Randall S.

2013-05-01

As universities seek to provide cost-effective, cross-cultural experiences using global virtual (GV) teams, the 'soft' communication skills typical of all teams, increases in importance for GV teams. Students need to be taught how to navigate through cultural issues and virtual tool issues to build strong trusting relationships with distant team members. Weekly team meetings provide an excellent opportunity to observe key team interactions that facilitate relationship and trust-building among team members. This study observed the weekly team meetings of engineering students attending two US universities and one Asian university as they collaborated as a single GV capstone GV team. In addition local team members were interviewed individually and collectively throughout the project to determine strategies that facilitated team relations and trust. Findings indicate the importance of student choice of virtual communication tools, the refining of communication practices, and specific actions to build trusting relationships. As student developed these attributes, collaboration and success was experienced on this GV team.

A Course in Medicine and Clinical Engineering for Engineers.

ERIC Educational Resources Information Center

Webster, John G.

A biomedical engineering course at the University of Wisconsin is described. The course is a comprehensive survey designed to develop the student's ability to participate in the solution of medical problems, particularly in areas involving technology. Course objectives and lecture outlines are provided. (MLH)

Encouraging Undergraduate Engineering Students towards Civic Engagement

ERIC Educational Resources Information Center

Wallen, Matthew R.; Pandit, Abhay S.

2009-01-01

Responding to the calls for teaching "soft skills" within the undergraduate engineering curriculum and for the university to address a perceived decrease in social capital, a programme titled Community Awareness Initiatives Responsibly Directed by Engineers (CAIRDE, an Irish language word meaning "friends") was instituted at…

X-traktor: A Rookie Robot, Simple, Yet Complex, Impeccably Designed, a Very Innovative Multidisciplinary Engineering Masterpiece

NASA Technical Reports Server (NTRS)

Henderson, A. J., Jr.

2001-01-01

FIRST is the acronym of For Inspiration and Recognition of Science and Technology. FIRST is a 501.C.3 non-profit organization whose mission is to generate an interest in science and engineering among today's young adults and youth. This mission is accomplished through a robot competition held annually in the spring of each year. NASAs Marshall Space Flight Center, Education Programs Department, awarded a grant to Lee High School, the sole engineering magnet school in Huntsville, Alabama. MSFC awarded the grant in hopes of fulfilling its goal of giving back invaluable resources to its community and engineers, as well as educating tomorrow's work force in the high-tech area of science and technology. Marshall engineers, Lee High School students and teachers, and a host of other volunteers and parents officially initiated this robot design process and competitive strategic game plan. The FIRST Robotics Competition is a national engineering contest, which immerses high school students in the exciting world of science and engineering. Teaming with engineers from government agencies, businesses, and universities enables the students to learn about the engineering profession. The students and engineers have six weeks to work together to brainstorm, design, procure, construct, and test their robot. The team then competes in a spirited, 'no-holds barred' tournament, complete with referees, other FIRST-designed robots, cheerleaders, and time clocks. The partnerships developed between schools, government agencies, businesses, and universities provide an exchange of resources and talent that build cooperation and expose students to new and rewarding career options. The result is a fun, exciting, and stimulating environment in which all participants discover the important connections between classroom experiences and real-world applications. This paper will highlight the story, engineering development, and evolutionary design of Xtraktor, the rookie robot, a manufacturing marvel and engineering achievement.

Research report: learning styles of biomedical engineering students.

PubMed

Dee, Kay C; Nauman, Eric A; Livesay, Glen A; Rice, Janet

2002-09-01

Examining students' learning styles can yield information useful to the design of learning activities, courses, and curricula. A variety of measures have been used to characterize learning styles, but the literature contains little information specific to biomedical engineering (BMEN) students. We, therefore, utilized Felder's Index of Learning Styles to investigate the learning style preferences of BMEN students at Tulane University. Tulane BMEN students preferred to receive information visually (preferred by 88% of the student sample) rather than verbally, focus on sensory information (55%) instead of intuitive information, process information actively (66%) instead of reflectively, and understand information globally (59%) rather than sequentially. These preferences varied between cohorts (freshman, sophomore, etc.) and a significantly higher percentage of female students preferred active and sensing learning styles. Compared to other engineering student populations, our sample of Tulane BMEN students contained the highest percentage of students preferring the global learning style. Whether this is a general trend for all BMEN students or a trait specific to Tulane engineers requires further investigation. Regardless, this study confirms the existence of a range of learning styles within biomedical engineering students, and provides motivation for instructors to consider how well their teaching style engages multiple learning styles.

The Middle School Curriculum: Engineering Anyone?

ERIC Educational Resources Information Center

Samuels, Kyle; Seymour, Richard

2015-01-01

Engineering programs have long thrived in U.S. universities. More recently, engineering content has been introduced in America's high schools, yet less so in elementary and middle schools across the nation. To meet the demand for engineers in the U.S., educators must play a more active role in inspiring young students to this career option.…

Reversing the Trend of Engineering Enrollment Declines with Innovative Outreach, Recruiting, and Retention Programs

ERIC Educational Resources Information Center

Davis, C. E.; Yeary, M. B.; Sluss, J. J., Jr.

2012-01-01

This paper discusses an all-encompassing approach to increase the number of students in engineering through innovative outreach, recruiting, and retention programs. Prior to adopting these programs, the School of Electrical and Computer Engineering (ECE) at the University of Oklahoma (OU), Norman, experienced a reduction in engineering enrollment…

Attracting Prospective Engineering Students in the Emerging European Space for Higher Education

ERIC Educational Resources Information Center

Lopez-Martin, Antonio J.

2010-01-01

A set of outreach activities implemented by the College of Engineering of the Public University of Navarra, Spain, is described. They represent different initiatives aimed to improve recruitment of young engineers in the difficult context of declining interest in engineering and the educational changes Europe is facing nowadays. The initiatives…

Formula student as part of a mechanical engineering curriculum

NASA Astrophysics Data System (ADS)

Davies, Huw Charles

2013-10-01

Formula Student (FS) is a multi-university student design competition managed by the UK Institution of Mechanical Engineers. Students are required to demonstrate and prove their creativity and engineering skills through the design, manufacture and financing of a small formula style race car. This paper seeks to explore the educational value that derives from the FS activity through a series of semi-structured interviews with key stakeholders. Through the analysis of the interview data, it was found that the FS activity supported development of student skills and competencies in the following areas: use of engineering knowledge to support the application of existing and emerging technology; application of theoretical and practical knowledge to the solution of engineering problems; development of technical and commercial management skills; development of effective interpersonal skills, including communication skills; and demonstration of personal commitment to professional development. In addition, a number of areas for implementing 'good practise' have been identified. The information herein supports educators in their responsibility to help meet the needs of the engineering industry for high quality graduates.

Minority University System Engineering: A Small Satellite Design Experience Held at the Jet Propulsion Laboratory During the Summer of 1996

NASA Technical Reports Server (NTRS)

Ordaz, Miguel Angel

1997-01-01

The University of Texas at El Paso (UTEP) in conjunction with the Jet Propulsion Laboratory (JPL), North Carolina A&T and California State University of Los Angeles participated during the summer of 1996 in a prototype program known as Minority University Systems Engineering (MUSE). The program consisted of a ten week internship at JPL for students and professors of the three universities. The purpose of MUSE as set forth in the MUSE program review August 5, 1996 was for the participants to gain experience in the following areas: 1) Gain experience in a multi-disciplinary project; 2) Gain experience working in a culturally diverse atmosphere; 3) Provide field experience for students to reinforce book learning; and 4) Streamline the design process in two areas: make it more financially feasible; and make it faster.

Role of physics in Saudi engineering education

NASA Astrophysics Data System (ADS)

Ahmed, M.

1984-05-01

In recent years some engineering schools in the Middle East have proposed reducing the amount of basic science courses in their curricula. A conference on engineering education in the Arabian Gulf countries held in Kuwait in 1980 suggested that the number of courses in physics and chemistry should be reduced from the present level (Jamjoom 1980). The arguments often put forward can be summarised as follows. First, engineering students are at present overburdened with too many basic science courses which puts a strain on the average student. This in turn leads to a high drop-out as is witnessed in many engineering colleges in this region. This drop-out, as high as 20% in some Saudi universities, is a cause of great concern among the university authorities. Secondly, it is argued that the number of credit hours allocated to departmental requirements is not sufficient to give a student enough breadth and depth of knowledge in his specialisation in particular engineering branches. Universities in Saudi Arabia follow the American credit-hour system in which courses are given certain credit hours, ranging from two to four, depending on the number of lectures per week as well as laboratory and tutorial requirements. Engineering students have to complete about 150 credit hours to graduate, which they normally do in four to five years. Out of these credit hours, about two-thirds are allocated to core courses (including physics) common to all branches of engineering. The remaining one-third are reserved for departmental specialisation. Since there is no possibility of increasing the overall credit hours necessary for graduation, it is suggested that the extra credit hours demanded for increasing the number of departmental courses should be obtained by correspondingly curtailing those for the basic sciences. When carefully scrutinised the arguments do not appear to be well founded. The reasons for high drop-out can be traced to more deep-rooted factors.

University Students' Understanding of Electromagnetic Induction

ERIC Educational Resources Information Center

Guisasola, Jenaro; Almudi, Jose M.; Zuza, Kristina

2013-01-01

This study examined engineering and physical science students' understanding of the electromagnetic induction (EMI) phenomena. It is assumed that significant knowledge of the EMI theory is a basic prerequisite when students have to think about electromagnetic phenomena. To analyse students' conceptions, we have taken into account the fact that…

Designing an Accompanying Ecosystem to Foster Entrepreneurship among Agronomic and Forestry Engineering Students. Opinion and Commitment of University Lecturers

ERIC Educational Resources Information Center

Ortiz-Medina, L.; Fernández-Ahumada, E.; Lara-Vélez, P.; Taguas, E. V.; Gallardo-Cobos, R.; del Campillo, M. C.; Guerrero-Ginel, J. E.

2016-01-01

In the Higher School of Agronomic and Forestry Engineering of the University of Cordoba, a collective project conceived as an 'ecosystem to support and accompany entrepreneurs' has been proposed. The approach aims to spread and consolidate the entrepreneurial spirit and to respond to the demands of possible stakeholders involved in the whole…

Graduate engineering research participation in aeronautics

NASA Technical Reports Server (NTRS)

Roberts, A. S., Jr.

1986-01-01

The Aeronautics Graduate Research Program commenced in 1971, with the primary goal of engaging students who qualified for regular admission to the Graduate School of Engineering at Old Dominion University in a graduate engineering research and study program in collaboration with NASA Langley Research Center, Hampton, Virginia. The format and purposes of this program are discussed. Student selection and program statistics are summarized. Abstracts are presented in the folowing areas: aircraft design, aerodynamics, lift/drag characteristics; avionics; fluid mechanics; solid mechanics; instrumentation and measurement techniques; thermophysical properties experiments; large space structures; earth orbital dynamics; and environmental engineering.

A Reflexive Approach to Interview Data in an Investigation of Argument

ERIC Educational Resources Information Center

Mitchell, Sally; Prior, Paul; Bilbro, Rebecca; Peake, Kelly; See, Beng Huat; Andrews, Richard

2008-01-01

As part of an exploratory study at three universities (two in the UK and one in the USA) of how first-year students in three disciplines (biology, electrical engineering and history) learn to argue, we conducted interviews (individual and group) with university faculty and students about the place of argument in their teaching and learning. Here…

English Proficiency and Admission and Graduation of Post-Secondary Students at a Puerto Rican University

ERIC Educational Resources Information Center

Alea, Jamie

2009-01-01

This dissertation has examined English proficiency as a mediating social factor within the occupational structure of Puerto Rico. It included an analysis of the educational records of 641 students majoring in industrial engineering, nursing, education and finance of the University of Puerto Rico, Mayaguez from 1998-2000. The investigation…

The development of Sustainability Graduate Community (SGC) as a learning pathway for sustainability education - a framework for engineering programmes in Malaysia Technical Universities Network (MTUN)

NASA Astrophysics Data System (ADS)

Johan, Kartina; Mohd Turan, Faiz

2016-11-01

‘Environmental and sustainability’ is one of the Program Outcome (PO) designated by the Board of Engineers Malaysia (BEM) as one of the accreditation program requirement. However, to-date the implementation of sustainability elements in engineering programme in the technical universities in Malaysia is within individual faculty's curriculum plan and lack of university-level structured learning pathway, which enable all students to have access to an education in sustainability across all disciplines. Sustainability Graduate Community (SGC) is a framework designed to provide a learning pathway in the curriculum of engineering programs to inculcate sustainability education among engineering graduates. This paper aims to study the required attributes in Sustainability Graduate Community (SGC) framework to produce graduates who are not just engineers but also skilful in sustainability competencies using Global Project Management (GPM) P5 Standard for Sustainability. The development of the conceptual framework is to provide a constructive teaching and learning plan for educators and policy makers to work on together in developing the Sustainability Graduates (SG), the new kind of graduates from Malaysia Technical Universities Network (MTUN) in Malaysia who are literate in sustainability practices. The framework also support the call for developing holistic students based on Malaysian Education Blueprint (Higher Education) and address the gap between the statuses of engineering qualification to the expected competencies from industries in Malaysia in particular by achieving the SG attributes outlined in the framework

KSC-03PD-1201

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. -- Gregg Buckingham, University Affairs officer, External Relations and Business Development Directorate, addresses students of MESA, the New Mexico Mathematics, Engineering and Science Achievement Program. The students are visiting KSC, touring facilities and meeting with mentors. MESA students, high school seniors who hold grade-point averages of at least 3.2 and who tutor other students in math and science, have made the spring trip for the past 14 years. The MESA program has close ties to the NASA Training Project at the University of New Mexico.

KSC-03PD-1202

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. - Gregg Buckingham, University Affairs officer, External Relations and Business Development Directorate, addresses students of MESA, the New Mexico Mathematics, Engineering and Science Achievement Program. The students are visiting KSC, touring facilities and meeting with mentors. MESA students, high school seniors who hold grade-point averages of at least 3.2 and who tutor other students in math and science, have made the spring trip for the past 14 years. The MESA program has close ties to the NASA Training Project at the University of New Mexico.

Physics Education in a Multidisciplinary Materials Research Environment

NASA Astrophysics Data System (ADS)

Doyle, W. D.

1997-03-01

The MINT Center, an NSF Materials Research Science and Engineering Center, is a multidisciplinary research program focusing on materials information storage. It involves 17 faculty, 10 post-doctoral fellows and 25 graduate students from six academic programs including Physics, Chemistry, Materials Science, Metallurgical and Materials Engineering, Electric al Engineering and Chemical Engineering, whose research is supported by university, federal and industrial funds. The research facilities (15,000 ft^2) which include faculty and student offices are located in one building and are maintained by the university and the Center at no cost to participating faculty. The academic requirements for the students are determined by the individual departments along relatively rigid, traditional grounds although several materials and device courses are offered for students from all departments. Within the Center, participants work in teams assigning responsibilities and sharing results at regularly scheduled meetings. Bi-weekly research seminars for all participants provide excellent opportunities for students to improve their communication skills and to receive critical input from a large, diverse audience. Strong collaboration with industrial partners in the storage industry supported by workshops, research reviews, internships, industrial visitors and participation in industry consortia give students a broader criteria for self-evaluation, higher motivation and excellent career opportunities. Physics students, because of their rigorous basic training, are an important element in a strong materials sciences program, but they often are deficient in the behavior and characterization of real materials. The curriculum for physics students should be broadened to prepare them fully for a rewarding career in this emerging discipline.

Harnessing the Environmental Professional Expertise of Engineering Students—The Course: ``Environmental Management Systems in the Industry''

NASA Astrophysics Data System (ADS)

Ben-Zvi-Assaraf, Orit; Ayal, Nitzan

2010-12-01

More and more technical universities now advocate integrating sustainability in higher education and including it as a strategic goal for improving education's quality and relevance to society. This study examines 30 fourth-year chemical engineering students, graduates of a university course designed to combine their terminological domain with sustainability-oriented goals, focusing on topics like corporate sustainability, developing environmental policy, introduction to ISO 14001—Environmental Management Systems (EMS), and environmental legislation. The study explores their perception of industrial-environmental issues and asks—How did the study unit influence the students' ability to use their preexisting scientific knowledge, while relating to industrial-environmental issues? Our findings indicate that engineering students can develop industrial-environmental awareness, and make use of interdisciplinary knowledge beyond that strictly related to the realm of engineering. Regarding the research's particular aim—i.e. determining the study unit's influence on students' ability to relate industrial-environmental issues to their own field of engineering—the findings indeed show a change in the students' conceptions of environmental elements related to industry. The course graduates became more attentive to the environmental aspects associated with building and opening a factory, and the concepts they raised in connection with the topic gained in variety.

Foreign Science and Engineering Students in the United States. InfoBrief. NSF 10-324

ERIC Educational Resources Information Center

Burrelli, Joan

2010-01-01

In 2008, about 568,000 foreign students (those holding temporary visas) studied at U.S. universities and colleges, 248,000 of them in science and engineering (S&E). There was an expectation that fall 2009 foreign enrollments might be negatively affected by the 2008-09 world financial crisis because of schools' restrictions on enrollment,…

Assessment of Factors Impacting Success for Incoming College Engineering Students in a Summer Bridge Program

ERIC Educational Resources Information Center

Reisel, John R.; Jablonski, Marissa; Hosseini, Hossein; Munson, Ethan

2012-01-01

A summer bridge program for incoming engineering and computer science freshmen has been used at the University of Wisconsin-Milwaukee from 2007 to 2010. The primary purpose of this program has been to improve the mathematics course placement for incoming students who initially place into a course below Calculus I on the math placement examination.…

Using VineUp to Match Students with Alumni Industry Mentors in Engineering: A Pilot Study

ERIC Educational Resources Information Center

Halupa, Colleen; Henry, Matthew

2015-01-01

This pilot study evaluated users' perceptions of the effectiveness of the VineUp platform to match mentors from a large United States manufacturing firm and mechanical engineering students in an honors program at a small private university. Four mentor/mentee pairs were surveyed and interviewed at the end of the nine-month program. Although the…

Tracking Financial Aid and Persistence of Women, Minority, and Needy Students in Science, Engineering, and Mathematics.

ERIC Educational Resources Information Center

Fenske, Robert H.; Porter, John D.; DuBrock, Caryl P.

2000-01-01

This longitudinal study followed four consecutive freshmen cohorts at a large urban public university. Found science, engineering, and mathematics (SEM) students persisted and graduated at higher rates than non-SEM majors. Gift aid for SEM majors was more likely to be merit-based than need-based. Women, but not underrepresented minorities or needy…

Open-Inquiry Driven Overcoming of Epistemological Difficulties in Engineering Undergraduates: A Case Study in the Context of Thermal Science

ERIC Educational Resources Information Center

Pizzolato, Nicola; Fazio, Claudio; Sperandeo Mineo, Rosa Maria; Persano Adorno, Dominique

2014-01-01

This paper addresses the efficacy of an open-inquiry approach that allows students to build on traditionally received knowledge. A sample of thirty engineering undergraduates, having already attended traditional university physics instruction, was selected for this study. The students were involved in a six-week long learning experience of…

The Problem-Solving Process in Physics as Observed When Engineering Students at University Level Work in Groups

ERIC Educational Resources Information Center

Gustafsson, Peter; Jonsson, Gunnar; Enghag, Margareta

2015-01-01

The problem-solving process is investigated for five groups of students when solving context-rich problems in an introductory physics course included in an engineering programme. Through transcripts of their conversation, the paths in the problem-solving process have been traced and related to a general problem-solving model. All groups exhibit…

Videogame Construction by Engineering Students for Understanding Modelling Processes: The Case of Simulating Water Behaviour

ERIC Educational Resources Information Center

Pretelín-Ricárdez, Angel; Sacristán, Ana Isabel

2015-01-01

We present some results of an ongoing research project where university engineering students were asked to construct videogames involving the use of physical systems models. The objective is to help them identify and understand the elements and concepts involved in the modelling process. That is, we use game design as a constructionist approach…

The Invention Studio: A University Maker Space and Culture

ERIC Educational Resources Information Center

Forest, Craig R.; Moore, Roxanne A.; Jariwala, Amit S.; Fasse, Barbara Burks; Linsey, Julie; Newstetter, Wendy; Ngo, Peter; Quintero, Christopher

2014-01-01

Creativity, invention, and innovation are values championed as central pillars of engineering education. However, university environments that foster open-ended design-build projects are uncommon. Fabrication and prototyping spaces at universities are typically "machine shops" where students relinquish actual fabrication activities to…

The Science Training Program for Young Italian Physicists and Engineers at Fermilab

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barzi, Emanuela; Bellettini, Giorgio; Donati, Simone

2015-03-12

Since 1984 Fermilab has been hosting a two-month summer training program for selected undergraduate and graduate Italian students in physics and engineering. Building on the traditional close collaboration between the Italian National Institute of Nuclear Physics (INFN) and Fermilab, the program is supported by INFN, by the DOE and by the Scuola Superiore di Sant`Anna of Pisa (SSSA), and is run by the Cultural Association of Italians at Fermilab (CAIF). This year the University of Pisa has qualified it as a “University of Pisa Summer School”, and will grant successful students with European Supplementary Credits. Physics students join the Fermilabmore » HEP research groups, while engineers join the Particle Physics, Accelerator, Technical, and Computing Divisions. Some students have also been sent to other U.S. laboratories and universities for special trainings. The programs cover topics of great interest for science and for social applications in general, like advanced computing, distributed data analysis, nanoelectronics, particle detectors for earth and space experiments, high precision mechanics, applied superconductivity. In the years, over 350 students have been trained and are now employed in the most diverse fields in Italy, Europe, and the U.S. In addition, the existing Laurea Program in Fermilab Technical Division was extended to the whole laboratory, with presently two students in Master’s thesis programs on neutrino physics and detectors in the Neutrino Division. And finally, a joint venture with the Italian Scientists and Scholars North-America Foundation (ISSNAF) provided this year 4 professional engineers free of charge for Fermilab. More details on all of the above can be found below.« less

Evaluation of the Material Point Method within CTH to Model 2-Dimensional Plate Impact Problems

DTIC Science & Technology

2014-09-01

Howard University . 14. ABSTRACT The material point method (MPM) is a mixed Eulerian and Lagrangian computational method that allows for the... University in Washington, DC, as a second-year graduate student within mechanical engineering. I also attended Howard University for my undergraduate...Kevin Rugirello, Dr Andrew Tonge, Dr Jeffrey Lloyd, Dr Mary Jane Graham, and Dr Gbadebo Owolabi. vi Student Bio I am currently attending Howard

Landslides! Engaging students in natural hazards and STEM principles through the exploration of landslide analog models

NASA Astrophysics Data System (ADS)

Gochis, E. E.; Lechner, H. N.; Brill, K. A.; Lerner, G.; Ramos, E.

2014-12-01

Graduate students at Michigan Technological University developed the "Landslides!" activity to engage middle & high school students participating in summer engineering programs in a hands-on exploration of geologic engineering and STEM (Science, Technology, Engineering and Math) principles. The inquiry-based lesson plan is aligned to Next Generation Science Standards and is appropriate for 6th-12th grade classrooms. During the activity students focus on the factors contributing to landslide development and engineering practices used to mitigate hazards of slope stability hazards. Students begin by comparing different soil types and by developing predictions of how sediment type may contribute to differences in slope stability. Working in groups, students then build tabletop hill-slope models from the various materials in order to engage in evidence-based reasoning and test their predictions by adding groundwater until each group's modeled slope fails. Lastly students elaborate on their understanding of landslides by designing 'engineering solutions' to mitigate the hazards observed in each model. Post-evaluations from students demonstrate that they enjoyed the hands-on nature of the activity and the application of engineering principles to mitigate a modeled natural hazard.

Enriching Science and Math through Engineering

ERIC Educational Resources Information Center

Redmond, Adrienne; Thomas, Julie; High, Karen; Scott, Margaret; Jordan, Pat; Dockers, Jean

2011-01-01

This case study reviewed the collaborative efforts of university engineers, teacher educators, and middle school teachers to advance sixth- and seventh-grade students' learning through a series of project-based engineering activities. This two-year project enriched regular school curricula by introducing real-world applications of science and…

Learning from fellow engineering students who have current professional experience

NASA Astrophysics Data System (ADS)

Davies, John W.; Rutherford, Ursula

2012-08-01

This paper presents an investigation of how experience-led content in an engineering degree can be strengthened by creating opportunities for engineering students to benefit from the knowledge, skills and resources of students with current professional experience. Students who study civil engineering part-time at Coventry University (while also working in the industry) are being used as mentors for full-time students, and careful attention is being paid to the input they can make to group project work. This paper reviews the results of evaluations of these two initiatives. The clearest enhancement to learning provided by the part-time students in these settings is the access they provide for the full-time students to real examples and the provision of actual physical artefacts such as drawings, photos, example documents and templates. Full-time students also gain an awareness of the value of the professional skills. The study confirms the value of these initiatives and points to future improvements.

Interpreting Context to the UK's National Student (Satisfaction) Survey Data for Science Subjects

ERIC Educational Resources Information Center

Fielding, Alan; Dunleavy, Peter J.; Langan, A. Mark

2010-01-01

Universities capture and use student feedback to improve the student experience, but how should information from national scale surveys be used at local and institutional levels? The authors explored the UK's National Student (Satisfaction) Survey (NSS) data relevant to science and engineering programmes using percentages of students who were…

A New Approach to Increasing Diversity in Engineering at the Example of Women in Engineering

ERIC Educational Resources Information Center

Schafer, Andrea I.

2006-01-01

A new initiative to incorporate diversity issues into the common engineering curriculum at the University of Wollongong (UoW) in Australia is outlined and the effect on student awareness quantified. The diversity issues were illustrated in the example of women in engineering, seeing that the numbers of women in engineering have dropped drastically…

Datasets on demographic trends in enrollment into undergraduate engineering programs at Covenant University, Nigeria.

PubMed

Popoola, Segun I; Atayero, Aderemi A; Badejo, Joke A; Odukoya, Jonathan A; Omole, David O; Ajayi, Priscilla

2018-06-01

In this data article, we present and analyze the demographic data of undergraduates admitted into engineering programs at Covenant University, Nigeria. The population distribution of 2649 candidates admitted into Chemical Engineering, Civil Engineering, Computer Engineering, Electrical and Electronics Engineering, Information and Communication Engineering, Mechanical Engineering, and Petroleum Engineering programs between 2002 and 2009 are analyzed by gender, age, and state of origin. The data provided in this data article were retrieved from the student bio-data submitted to the Department of Admissions and Student Records (DASR) and Center for Systems and Information Services (CSIS) by the candidates during the application process into the various engineering undergraduate programs. These vital information is made publicly available, after proper data anonymization, to facilitate empirical research in the emerging field of demographics analytics in higher education. A Microsoft Excel spreadsheet file is attached to this data article and the data is thoroughly described for easy reuse. Descriptive statistics and frequency distributions of the demographic data are presented in tables, plots, graphs, and charts. Unrestricted access to these demographic data will facilitate reliable and evidence-based research findings for sustainable education in developing countries.

Bringing Space Science to the Undergraduate Classroom: NASA's USIP Mission

NASA Astrophysics Data System (ADS)

Vassiliadis, D.; Christian, J. A.; Keesee, A. M.; Spencer, E. A.; Gross, J.; Lusk, G. D.

2015-12-01

As part of its participation in NASA's Undergraduate Student Instrument Project (USIP), a team of engineering and physics students at West Virginia University (WVU) built a series of sounding rocket and balloon missions. The first rocket and balloon missions were flown near-simultaneously in a campaign on June 26, 2014 (image). The second sounding rocket mission is scheduled for October 5, 2015. Students took a course on space science in spring 2014, and followup courses in physics and aerospace engineering departments have been developed since then. Guest payloads were flown from students affiliated with WV Wesleyan College, NASA's IV&V Facility, and the University of South Alabama. Students specialized in electrical and aerospace engineering, and space physics topics. They interacted regularly with NASA engineers, presented at telecons, and prepared reports. A number of students decided to pursue internships and/or jobs related to space science and technology. Outreach to the campus and broader community included demos and flight projects. The physics payload includes plasma density and temperature measurements using a Langmuir and a triple probe; plasma frequency measurements using a radio sounder (WVU) and an impedance probe (U.S.A); and a magnetometer (WVWC). The aerospace payload includes an IMU swarm, a GPS experiment (with TEC capability); a cubesat communications module (NASA IV&V), and basic flight dynamics. Acknowledgments: staff members at NASA Wallops Flight Facility, and at the Orbital-ATK Rocket Center, WV.

Project SunbYte: solar astronomy on a budget

NASA Astrophysics Data System (ADS)

Alvarez Gonzalez, F.; Badilita, A.-M.; Baker, A.; Cho, Y.-H.; Dhot, N.; Fedun, V.; Hare, C.; He, T.; Hobbs, M.; Javed, M.; Lovesey, H.; Lord, C.; Panoutsos, G.; Permyakov, A.; Pope, S.; Portnell, M.; Rhodes, L.; Sharma, R.; Taras, P.; Taylor, J.; Tilbrook, R.; Verth, G.; Wrigley, S. N.; Yaqoob, M.; Cook, R.; McLaughlin, J.; Morton, R.; Scullion, E.; Shelyag, S.; Hamilton, A.; Zharkov, S.; Jess, D.; Wrigley, M.

2017-04-01

The Sheffield University Nova Balloon Lifted Solar Telescope (SunbYte) is a high-altitude balloon experiment devised and run largely by students at the University of Sheffield, and is scheduled for launch in October 2017. It was the only UK project in 2016 to be selected for the balloon side of the Swedish-German student programme REXUS/BEXUS (Rocket and Balloon Experiments for University Students; see box on p2.25). The success of the SunbYte team in the REXUS/BEXUS selection process is an unprecedented opportunity for the students to gain valuable experience working in the space engineering industry, using their theoretical knowledge and networking with students and technology companies from all over Europe.

Effectiveness of an ethics course delivered in traditional and non-traditional formats.

PubMed

Feldhaus, Charles R; Fox, Patricia L

2004-04-01

This paper details a three-credit-hour undergraduate ethics course that was delivered using traditional, distance, and compressed formats. OLS 263: Ethical Decisions in Leadership is a 200-level course offered by the Department of Organizational Leadership and Supervision in the Purdue School of Engineering and Technology at Indiana University Purdue University Indianapolis (IUPUI). Students in engineering, technology, business, nursing, and other majors take the course. In an effort to determine student perceptions of course and instructor effectiveness, end-of-course student survey data were compared using data from traditional, distance, and compressed sections of the course. In addition, learning outcomes from the final course project were evaluated using a standardized assessment rubric and scores on the course project.

Can't Do Maths--Understanding Students' Maths Anxiety

ERIC Educational Resources Information Center

Metje, N.; Frank, H. L.; Croft, P.

2007-01-01

The number of students continuing with their mathematics education post GCSE level has declined in recent years and hence students entering Engineering degrees are reducing. The University of Birmingham recognized this problem and introduced the Suite of Technology programme (STP) which no longer requires students to have A-level mathematics.…

The Students' Survey of Education for Sustainable Development Competencies: A Comparison among Faculties

ERIC Educational Resources Information Center

Biasutti, Michele; Surian, Alessio

2012-01-01

The paper reports research employing a quantitative approach to investigating the competences of university students about educating for sustainable development (ESD). Participants were 467 bachelor students of the following five areas: social sciences, educational sciences, applied sciences, engineering and health sciences. The Student Survey of…

A House Divided? Examining Persistence for On-Campus STEM and Non-STEM Students

ERIC Educational Resources Information Center

Gansemer-Topf, Ann M.; Kollasch, Aurelia; Sun, Jie

2017-01-01

Improving student persistence, especially in science, technology, engineering, and mathematics (STEM) fields, continues to be at the forefront of national educational policy discussions. Living in university housing, with its focus specifically on assisting students in transition, has consistently been positively related to student persistence.…

Considering Student Voices: Examining the Experiences of Underrepresented Students in Intervention Programs

ERIC Educational Resources Information Center

Gibau, Gina Sanchez

2015-01-01

Qualitative studies that examine the experiences of underrepresented minority students in science, technology, engineering, and mathematics fields are comparatively few. This study explores the self-reported experiences of underrepresented graduate students in the biomedical sciences of a large, midwestern, urban university. Document analysis of…

University teachers' perspectives on the role of the Laplace transform in engineering education

NASA Astrophysics Data System (ADS)

Holmberg née González Sampayo, Margarita; Bernhard, Jonte

2017-07-01

The Laplace transform is an important tool in many branches of engineering, for example, electric and control engineering, but is also regarded as a difficult topic for students to master. We have interviewed 22 university teachers from five universities in three countries (Mexico, Spain and Sweden) about their views on relationships among mathematics, physics and technology/application aspects in the process of learning the Laplace transform in engineering education. Strikingly, the teachers held a spectrum of qualitatively differing views, ranging from seeing virtually no connection (e.g. some thought the Laplace transform has no relevance in engineering), through to regarding the aspects as intimately, almost inseparably linked. The lack of awareness of the widely differing views among teachers might lead to a lack of constructive alignment among different courses that is detrimental to the quality of engineering education.

Electric Utility Transmission and Distribution Line Engineering Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peter McKenny

2010-08-31

Economic development in the United States depends on a reliable and affordable power supply. The nation will need well educated engineers to design a modern, safe, secure, and reliable power grid for our future needs. An anticipated shortage of qualified engineers has caused considerable concern in many professional circles, and various steps are being taken nationwide to alleviate the potential shortage and ensure the North American power system's reliability, and our world-wide economic competitiveness. To help provide a well-educated and trained workforce which can sustain and modernize the nation's power grid, Gonzaga University's School of Engineering and Applied Science hasmore » established a five-course (15-credit hour) Certificate Program in Transmission and Distribution (T&D) Engineering. The program has been specifically designed to provide working utility engineering professionals with on-line access to advanced engineering courses which cover modern design practice with an industry-focused theoretical foundation. A total of twelve courses have been developed to-date and students may select any five in their area of interest for the T&D Certificate. As each course is developed and taught by a team of experienced engineers (from public and private utilities, consultants, and industry suppliers), students are provided a unique opportunity to interact directly with different industry experts over the eight weeks of each course. Course material incorporates advanced aspects of civil, electrical, and mechanical engineering disciplines that apply to power system design and are appropriate for graduate engineers. As such, target students for the certificate program include: (1) recent graduates with a Bachelor of Science Degree in an engineering field (civil, mechanical, electrical, etc.); (2) senior engineers moving from other fields to the utility industry (i.e. paper industry to utility engineering or project management positions); and (3) regular working professionals wishing to update their skills or increase their knowledge of utility engineering design practices and procedures. By providing graduate educational opportunities for the above groups, the T&D Program will help serve a strong industry need for training the next generation of engineers in the cost-effective design, construction, operation, and maintenance of modern electrical transmission and distribution systems. In addition to developing the on-line engineering courses described above, the T&D Program also focused significant efforts towards enhancing the training opportunities available to power system operators in the northwest. These efforts have included working with outside vendors to provide NERC-approved training courses in Gonzaga University's (GU) system operator training facility, support for an accurate system model which can be used in regional blackstart exercises, and the identification of a retired system operator who could provide actual regional training courses. The GU system operator training facility is also being used to recruit young workers, veterans, and various under-represented groups to the utility industry. Over the past three years students from Columbia Gorge Community College, Spokane Falls Community College, Walla Walla Community College, Central Washington University, Eastern Washington University, Gonzaga University, and various local high schools have attended short (one-day) system operator training courses free of charge. These collaboration efforts has been extremely well received by both students and industry, and meet T&D Program objectives of strengthening the power industry workforce while bridging the knowledge base across power worker categories, and recruiting new workers to replace a predominantly retirement age workforce. In the past three years the T&D Program has provided over 170 utility engineers with access to advanced engineering courses, been involved in training more than 300 power system operators, and provided well over 500 college and high school students with an experience in running a power system simulator and an exposure to various utility-related professions and craft trades.« less

Mapping the level of scientific reasoning skills to instructional methodologies among Malaysian science-mathematics-engineering undergraduates

NASA Astrophysics Data System (ADS)

Tajudin, Nor'ain Mohd.; Saad, Noor Shah; Rahman, Nurulhuda Abd; Yahaya, Asmayati; Alimon, Hasimah; Dollah, Mohd. Uzi; Abd Karim, Mohd. Mustaman

2012-05-01

The objectives of this quantitative survey research were (1) to establish the level of scientific reasoning (SR) skills among science, mathematics and engineering (SME) undergraduates in Malaysian Institute of Higher Learning (IHL); (b) to identify the types of instructional methods in teaching SME at universities; and (c) to map instructional methods employed to the level of SR skills among the undergraduates. There were six universities according to zone involved in this study using the stratification random sampling technique. For each university, the faculties that involved were faculties which have degree students in science, mathematics and engineering programme. A total of 975 students were participated in this study. There were two instruments used in this study namely, the Lawson Scientific Reasoning Skills Test and the Lecturers' Teaching Style Survey. The descriptive statistics and the inferential statistics such as mean, t-test and Pearson correlation were used to analyze the data. Findings of the study showed that most students had concrete level of scientific reasoning skills where the overall mean was 3.23. The expert and delegator were dominant lecturers' teaching styles according to students' perception. In addition, there was no correlation between lecturers' teaching style and the level of scientific reasoning skills. Thus, this study cannot map the dominant lecturers' teaching style to the level of scientific reasoning skills of Science, Mathematics and Engineering undergraduates in Malaysian Public Institute of Higher Learning. Nevertheless, this study gave some indications that the expert and delegator teaching styles were not contributed to the development of students' scientific reasoning skills. This study can be used as a baseline for Science, Mathematics and Engineering undergraduates' level of scientific reasoning skills in Malaysian Public Institute of Higher Learning. Overall, this study also opens an endless source of other researchers to investigate more areas on scientific reasoning skills so that the potential instructional model can be developed to enhance students' level of scientific reasoning skills in Malaysian Public Institute of Higher Learning.

Proceedings of the 6th Annual Summer Conference: NASA/USRA University Advanced Design Program

NASA Technical Reports Server (NTRS)

1990-01-01

The NASA/USRA University Advanced Design Program is a unique program that brings together NASA engineers, students, and faculty from United States engineering schools by integrating current and future NASA space/aeronautics engineering design projects into the university curriculum. The Program was conceived in the fall of 1984 as a pilot project to foster engineering design education in the universities and to supplement NASA's in-house efforts in advanced planning for space and aeronautics design. Nine universities and five NASA centers participated in the first year of the pilot project. The study topics cover a broad range of potential space and aeronautics projects that could be undertaken during a 20 to 30 year period beginning with the deployment of the Space Station Freedom scheduled for the mid-1990s. Both manned and unmanned endeavors are embraced, and the systems approach to the design problem is emphasized.

Immigration Facts on Foreign Students

ERIC Educational Resources Information Center

Ruiz, Neil G.

2013-01-01

U.S. policymakers have put forth various immigration reform proposals to improve retention of foreign students obtaining advanced degrees in science, technology, engineering, and mathematics (STEM) from American universities. These students are considered particularly desirable because they, like their American counterparts, offer the types of…

Photonics education development for electrical engineering students

NASA Astrophysics Data System (ADS)

Cao, Yang; Luo, Yuan; Liu, Yu; Hu, ZhangFang; Cai, Xuemei

2017-08-01

We describe the contents of an advanced undergraduate course on photonics at School of Electrical Engineering, Chongqing University of Posts and Telecommunications. The main goal of the course is to equip the student with the necessary theoretical and practical knowledge to participate in photonics-related industry and further graduate level study and research if they choose. The prerequisites include college-level physics and higher mathematics which a general engineering student has already had in his/her first and second year college study. Although applications of photonics are ubiquitous such as telecommunications, photonic computing, spectroscopy, military technology, and biophotonics etc. Telecommunication information system application is more emphasized in our course considering about the potential job chances for our students.

The Experience of Teaching of Descriptive Geometry and Engineering Graphics in Russian Language as a Foreign Language

ERIC Educational Resources Information Center

Voronina, Marianna V.; Tretyakova, Zlata O.

2017-01-01

The article considers the peculiarities of training foreign students subject "Descriptive geometry and Engineering Graphics" in a modern engineering university of Russia. The relevance of the problem conditioned by the fact that virtually there are no special studies of teaching Descriptive Geometry and Engineering Graphics in Russian…

Analyzing Student Aid Packaging To Improve Low-Income and Minority Student Access, Retention and Degree Completion. AIR 1999 Annual Forum Paper.

ERIC Educational Resources Information Center

Fenske, Robert H.; Porter, John D.; DuBrock, Caryl P.

This study examined the persistence of and financial aid to needy students, underrepresented minority students, and women students, especially those majoring in science, engineering, and mathematics at a large public research university. An institutional student tracking and student financial aid database was used to follow four freshmen cohorts…

Fuel Cell Car Design Project for Freshman Engineering Courses

ERIC Educational Resources Information Center

Duke, Steve R.; Davis, Virginia A.

2014-01-01

In the Samuel Ginn College of Engineering at Auburn University, we have integrated a semester long design project based on a toy fuel cell car into our freshman "Introduction to Chemical Engineering Class." The project provides the students a basic foundation in chemical reactions, energy, and dimensional analysis that facilitates…

Women Engineering Faculty: Expanding the Pipeline

ERIC Educational Resources Information Center

Greni, Nadene Deiterman

2006-01-01

The purpose for this case study was to explore the features of undergraduate engineering departmental and college support that influenced the persistence of women students. Women engineering faculty members were among the participants at three Land Grant universities in the Midwest. The data revealed the theme, Expanding the Pipeline, and…

Creating Educational Opportunities for Engineers with Communication Technologies.

ERIC Educational Resources Information Center

Baldwin, Lionel V.

The large number and known career patterns of engineers make them an important target population for the use of videotechnology in programs of continuing professional education. Currently, universities use videobased instruction with engineering students on and off campus. A variety of signal delivery systems are used to link job sites to…

How to Retain Postgraduate Students in Engineering Programmes: A Practical Perspective

ERIC Educational Resources Information Center

Le, Khoa N.; Tam, Vivian W. Y.

2008-01-01

Six factors for pursuing an engineering postgraduate programme at Griffith University including (i) programme quality; (ii) employment prospects; (iii) practicality; (iv) personal interest; (v) popularity; and (vi) reputation; and 11 factors for not pursuing this engineering programme including (i) employment prospects; (ii) degree of difficulty;…

Incorporating Six Sigma Methodology Training into Chemical Engineering Education

ERIC Educational Resources Information Center

Dai, Lenore L.

2007-01-01

Six Sigma is a buzz term in today's technology and business world and there has been increasing interest to initiate Six Sigma training in college education. We have successfully incorporated Six Sigma methodology training into a traditional chemical engineering course, Engineering Experimentation, at Texas Tech University. The students have…

Outsiders Looking In: Tutor Expertise in Engineering Writing

ERIC Educational Resources Information Center

Bengesai, Annah

2015-01-01

Drawing on an academic literacies approach, this article explores the representations of technical communication by non-content expert tutors teaching the Technical Communication for Engineering course at a South African university. The course is offered to all first year engineering students as a developmental academic literacy course. It is…

Engineering Sustainable Engineers through the Undergraduate Experience

ERIC Educational Resources Information Center

Weatherton, Yvette Pearson; Sattler, Melanie; Mattingly, Stephen; Chen, Victoria; Rogers, Jamie; Dennis, Brian

2012-01-01

In order to meet the challenges of sustainable development, our approach to education must be modified to equip students to evaluate alternatives and devise solutions that meet multi-faceted requirements. In 2009, faculty in the Departments of Civil, Industrial and Mechanical Engineering at the University of Texas at Arlington began implementation…

Engineering and the Liberal Arts: Strangers No Longer

ERIC Educational Resources Information Center

Chronicle of Higher Education, 2008

2008-01-01

Colleges and universities increasingly view engineering as an important part of a liberal-arts education. Rather than segregate engineering from the arts and humanities, they are integrating the disciplines, in hopes of educating students to perform more effectively in an increasingly complex and technological world. Several college presidents,…

Socialization Experiences Resulting from Engineering Teaching Assistantships at Purdue University

ERIC Educational Resources Information Center

Mena, Irene B.

2010-01-01

The purpose of this study was to explore and understand the types of socialization experiences that result from engineering teaching assistantships. Using situated learning as the theoretical framework and phenomenology as the methodological framework, this study highlights the experiences of 28 engineering doctoral students who worked as…

Implementation of Effective Capstone Projects in Undergraduate Manufacturing Design Engineering Program

ERIC Educational Resources Information Center

Viswanathan, Shekar

2017-01-01

Final program projects (capstone course) in manufacturing design engineering technology at National University are intensive experiences in critical thinking and analysis, designed to broaden students' perspectives and provide an opportunity for integration of coursework in the area of manufacturing design engineering. This paper focuses on three…

Engineering in Communities: Learning by Doing

ERIC Educational Resources Information Center

Goggins, J.

2012-01-01

Purpose: The purpose of this paper is to focus on a number of initiatives in civil engineering undergraduate programmes at the National University of Ireland, Galway (NUIG) that allow students to complete engineering projects in the community, enabling them to learn by doing. Design/methodology/approach: A formal commitment to civic engagement was…

AHP based Anthropometric Analysis of University Hall Bed Design in Bangladesh

NASA Astrophysics Data System (ADS)

Halder, Pobitra; Sarker, Eity; Karmaker, Chitralekha

2018-05-01

In university hall, different types of bed are used for providing sleeping environment to the students. Although there are wide variations in the design of students' bed in Bangladeshi university hall, none of them are designed properly considering the anthropometric data. In this study, four anthropometric measurements related to normal students' bed dimensions were measured from 300 students from a public university hall in Bangladesh. The feedbacks regarding different health problems and their reasons were collected from considering practical situations of the students and gathering experts' opinions. Chi-square test showed that back pain, blood circulation problem, fatigue, comfort, and sleeping problem are related to students' anthropometric measurements. The analytic hierarchy process (AHP) analysis identified students' bed length as the most responsible attribute for ergonomic problems of the students. Finally, the linear regression and correlation analysis suggested the bed dimensions based on stature of the students. This study can be a helpful guideline for industrial engineers and manufacturers in designing more comfortable students' bed.

Missouri S&T formula electric racing.

DOT National Transportation Integrated Search

2014-05-01

The Formula Electric racing team will promote Missouri S&Ts engineering excellence by successfully competing against other top : engineering universities in the US and around the world. Students on the team will have the opportunity to reinforce t...

Iowa State University's undergraduate minor, online graduate certificate and resource center in NDE

NASA Astrophysics Data System (ADS)

Bowler, Nicola; Larson, Brian F.; Gray, Joseph N.

2014-02-01

Nondestructive evaluation is a `niche' subject that is not yet offered as an undergraduate or graduate major in the United States. The undergraduate minor in NDE offered within the College of Engineering at Iowa State University (ISU) provides a unique opportunity for undergraduate aspiring engineers to obtain a qualification in the multi-disciplinary subject of NDE. The minor requires 16 credits of course work within which a core course and laboratory in NDE are compulsory. The industrial sponsors of Iowa State's Center for Nondestructive Evaluation, and others, strongly support the NDE minor and actively recruit students from this pool. Since 2007 the program has graduated 10 students per year and enrollment is rising. In 2011, ISU's College of Engineering established an online graduate certificate in NDE, accessible not only to campus-based students but also to practicing engineers via the web. The certificate teaches the fundamentals of three major NDE techniques; eddy-current, ultrasonic and X-ray methods. This paper describes the structure of these programs and plans for development of an online, coursework-only, Master of Engineering in NDE and thesis-based Master of Science degrees in NDE.

A Study on the Attitudes and Opinions of Engineering Students from the University of Baja California, Mexico, on Science, Technology, and Society

ERIC Educational Resources Information Center

Oliveros Ruiz, Maria Amparo; Sevilla Garcia, Juan Jose; Schorr, Michael

2010-01-01

A proposal is presented for the incorporation of the concepts of STS into the teaching of science and technology at the Faculty of Engineering, Mexicali Campus, of the University of Baja California. The method outlined for the development of research and the application of the "Opinions Questionnaire on Science, Technology and Society"…

Howard University Energy Expert Systems Institute Summer Program (EESI)

NASA Technical Reports Server (NTRS)

Momoh, James A.; Chuku, Arunsi; Abban, Joseph

1996-01-01

Howard University, under the auspices of the Center for Energy Systems and Controls runs the Energy Expert Systems Institute (EESI) summer outreach program for high school/pre-college minority students. The main objectives are to introduce precollege minority students to research in the power industry using modern state-of-the-art technology such as Expert Systems, Fuzzy Logic and Artificial Neural Networks; to involve minority students in space power management, systems and failure diagnosis; to generate interest in career options in electrical engineering; and to experience problem-solving in a teamwork environment consisting of faculty, senior research associates and graduate students. For five weeks the students are exposed not only to the exciting experience of college life, but also to the inspiring field of engineering, especially electrical engineering. The program consists of lectures in the fundamentals of engineering, mathematics, communication skills and computer skills. The projects are divided into mini and major. Topics for the 1995 mini projects were Expert Systems for the Electric Bus and Breast Cancer Detection. Topics on the major projects include Hybrid Electric Vehicle, Solar Dynamics and Distribution Automation. On the final day, designated as 'EESI Day' the students did oral presentations of their projects and prizes were awarded to the best group. The program began in the summer of 1993. The reaction from the students has been very positive. The program also arranges field trips to special places of interest such as the NASA Goddard Space Center.

Undergraduate Student Satisfaction and Achievement at the GetWET Observatory: A Fluid Learning Experience at Colorado State University

ERIC Educational Resources Information Center

Rathburn, Sara L.; Weinberg, Andrea E.

2011-01-01

The GetWET Observatory was developed as part of an overall course redesign of the Introductory Geology Laboratory at Colorado State University to improve student learning of key surface and groundwater concepts for nonmajors in science, technology, engineering, and mathematics. Consisting of six groundwater monitoring wells, the GetWET Observatory…

Transfer students in STEM majors at a Midwestern University: Academic and social involvement factors that influence student success

NASA Astrophysics Data System (ADS)

Lopez, Carlos

There is soon-to-be a shortage of qualified U.S. workers in science, technology, engineering, and mathematics (STEM). As a result, many science-related jobs are being filled by technically-skilled foreign workers. If the U.S wants to maintain its global economic leadership, then it must ensure a continuous growth of highly-trained individuals in STEM disciplines. Therefore, American institutions of higher education, including community colleges, must identify potential factors that contribute to the lack of interest in STEM majors, as well as the low rate of success of students who enter STEM majors but struggle to finish their degrees. The purpose of this study was to ascertain the perceptions of community college transfer students who are pursuing bachelor degrees in STEM majors at Iowa State University (ISU). What were their transfer experiences and what influenced their academic success in STEM. Participants were encouraged to share their transfer experiences while at the community college as well as their experiences on the ISU campus. They were also asked about their level of academic involvement, their relationships with faculty, and their participation in peer group activities prior to and after transferring. The research design included both quantitative and qualitative components, which provided an in-depth look at the experiences of STEM non-engineering and engineering students. Quantitative data include students' background characteristics, demographic information, and college activities at the community college and ISU. Qualitative data were used to illuminate students' overall transfer experience and their successful journey in STEM fields. The combination of quantitative and qualitative methods allowed a better understanding of the strategies students put into practice once they transfer from a community college to a four-year institution in pursuit of a STEM bachelor's degree. The results of this study suggest that there is an association among the background characteristics, community college experiences, university experiences, and the overall adjustment and cumulative GPA of transfer students from STEM non-engineering and engineering majors. In addition, students reported how their early experiences in science and mathematics inspired them to pursue a career in STEM. Even though students chose to go into STEM areas at the community college and university level due to prior interest, the role of academic advisors and faculty were crucial to the adjustment process. Thus, it is vital for academic advisors and faculty to assist students in researching the transfer process to four-year institutions because students need to understand why this is essential to their academic and social adjustment process. The results indicate that it is important to encourage students to interact inside and outside the classroom with other students and instructors. Also, students should become more involved in academic and social groups since these are important factors in enhancing their academic and social adjustment.

The acquisition and transfer of knowledge of electrokinetic-hydrodynamics (EKHD) fundamentals: an introductory graduate-level course

NASA Astrophysics Data System (ADS)

Pascal, Jennifer; Tíjaro-Rojas, Rocío; Oyanader, Mario A.; Arce, Pedro E.

2017-09-01

Relevant engineering applications, such as bioseparation of proteins and DNA, soil-cleaning, motion of colloidal particles in different media, electrical field-based cancer treatments, and the cleaning of surfaces and coating flows, belongs to the family of 'Applied Field Sensitive Process Technologies' requiring an external field to move solutes in a fluid within a fibrous (or porous) domain. This field incorporates an additional variable that makes the analysis very challenging and can create for the student a number of new problems to solve. A graduate-level course, based on active-learning approaches and High Performance Learning Environments, where transfer of knowledge plays a key role, was designed by the Chemical Engineering Department at Tennessee Technological University. This course, where the fundamentals principles of EKHD were taught to science, engineering and technology students was designed by the Chemical Engineering Department at the Tennessee Technological University, Cookeville, TN. An important number of these students were able to grasp the tools required to advance their research projects that led to numerous technical presentations in professional society meetings and publications in peered-reviewed journals.

Students' Views About Potentially Offering Physics Courses Online

NASA Astrophysics Data System (ADS)

Ramlo, Susan E.

2016-06-01

Nationally, many public universities have started to move into the online course and program market that is most often associated with for-profit institutions of higher education. Administrators in public universities make statements regarding benefits to students' desire for flexibility and profit margins related to online courses. But do students attending a large public university want to take courses online especially science courses perceived to be difficult such as freshmen-level physics courses? This study took place at a large, public, Midwestern university and involved students enrolled in the first semester of a face-to-face, flipped physics course for engineering technology majors. Statements were collected from comments about online courses made by the university's administration and students in the course. Twenty students sorted 45 statements. Two student views emerged with one rejecting online courses in general and the other primarily rejecting online math, science, and technology courses, including physics. Students' descriptions of their previous online course experiences were used to inform the analyses and to assist in describing the two views that emerged in conjunction with the distinguishing statements. Consensus among the two views is also discussed. Overall, the results indicate a potential divergence between student views and what university administrators believe students want.

Women Engineers: Factors and Obstacles Related to the Pursuit of a Degree in Engineering

NASA Astrophysics Data System (ADS)

Wentling, Rose Mary; Camacho, Cristina

Research on women in engineering confirms the presence of gender barriers that affect the recruitment and retention of women in engineering. These barriers stop some women from choosing engineering as a field of study, and impede some women from completing a degree in engineering. However, there are some young female students who complete their engineering education despite the presence of obstacles throughout their college years. This study addressed the factors that have hindered, motivated, and assisted women who graduated with a degree in engineering. By studying and understanding the barriers that hinder women in deciding to pursue and in completing a degree in engineering, as well as the factors that assist and encourage them, we can learn how to break down the barriers and how to facilitate the educational journey of female engineering students. This study provides valuable insights and created a framework from which high schools, universities, researchers, and female students can directly benefit.

Recruiting Talent: Indiana University-Purdue University Indianapolis Graduates the First Participants in its Research Scholars Program.

ERIC Educational Resources Information Center

Lords, Erik

2001-01-01

Describes the Minority Research Scholars Program (MRSP) at Indiana University-Purdue University Indianapolis, which funds the education of a group of minority students in seven disciplines: science, engineering and technology, social work, nursing, dental hygiene, physical education, and allied health. The program includes research projects,…

Climate Change Communicators: The C3E3 Project

NASA Astrophysics Data System (ADS)

Sharif, H. O.; Joseph, J.

2013-12-01

The University of Texas at San Antonio (UTSA), San Antonio College (SAC), and the University of North Dakota (UND) have partnered with NASA to provide underrepresented undergraduates from UTSA, SAC, and other community colleges climate-related research and education experiences through the Climate Change Communication: Engineer, Environmental science, and Education (C3E3) project. The program aims to develop a robust response to climate change by providing K-16 climate change education; enhance the effectiveness of K-16 education particularly in engineering and other STEM disciplines by use of new instructional technologies; increase the enrollment in engineering programs and the number of engineering degrees awarded by showing engineering's usefulness in relation to the much-discussed contemporary issue of climate change; increase persistence in STEM degrees by providing student research opportunities; and increase the ethnic diversity of those receiving engineering degrees and help ensure an ethnically diverse response to climate change. Students participated in the second summer internship funded by the project. More than 60 students participated in guided research experiences aligned with NASA Science Plan objectives for climate and Earth system science and the educational objectives of the three institutions. The students went through training in modern media technology (webcasts), and in using this technology to communicate the information on climate change to others, especially high school students, culminating in production of webcasts on investigating the aspects of climate change using NASA data. Content developed is leveraged by NASA Earth observation data and NASA Earth system models and tools. Several departments are involved in the educational program.